WorldWideScience

Sample records for high-pressure high-temperature formation

  1. Formation of diamond powders from melamine under high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    FANG Lei-Ming; CHEN Xi-Ping; H.Ohfuji; T.Irifune; SUN Guang-Ai; CHEN Bo; PENG Shu-Ming

    2013-01-01

    High pressure pyrolysis of melamine has been attracting great interest recently,due to it being considered as a suitable precursor to realize the g-C3N4 and even superhard C3N4.In this work,we studied the detailed pyrolysis behavior of melamine at 22 GPa.Melamine was stable at 800 ℃,and decomposed to diamond in the form of powder at 1500-2000 ℃ under this pressure condition.At 2000 ℃,the pure cubic diamond powders with 0.1-0.5 μm grain size were obtained.The diamond particles exhibited euhedral forms and dispersed to each other,we proposed that these novel features were caused by the presence of liquid N2 and NH3 during diamond formation.The high pressure pyrolysis of melamine may provide a new means of producing micrometer-sized diamond powders.

  2. Abiotic formation of valine peptides under conditions of high temperature and high pressure.

    Science.gov (United States)

    Furukawa, Yoshihiro; Otake, Tsubasa; Ishiguro, Takato; Nakazawa, Hiromoto; Kakegawa, Takeshi

    2012-12-01

    We investigated the oligomerization of solid valine and the stabilities of valine and valine peptides under conditions of high temperature (150-200 °C) and high pressure (50-150 MPa). Experiments were performed under non-aqueous condition in order to promote dehydration reaction. After prolonged exposure of monomeric valine to elevated temperatures and pressures, the products were analyzed by liquid chromatography mass spectrometry comparing their retention times and masses. We identified linear peptides that ranged in size from dimer to hexamer, as well as a cyclic dimer. Previous studies that attempted abiotic oligomerization of valine in the absence of a catalyst have never reported valine peptides larger than a dimer. Increased reaction temperature increased the dissociative decomposition of valine and valine peptides to products such as glycine, β-alanine, ammonia, and amines by processes such as deamination, decarboxylation, and cracking. The amount of residual valine and peptide yields was greater at higher pressures at a given temperature, pressure, and reaction time. This suggests that dissociative decomposition of valine and valine peptides is reduced by pressure. Our findings are relevant to the investigation of diagenetic processes in prebiotic marine sediments where similar pressures occur under water-poor conditions. These findings also suggest that amino acids, such as valine, could have been polymerized to peptides in deep prebiotic marine sediments within a few hundred million years.

  3. Abiotic Formation of Valine Peptides Under Conditions of High Temperature and High Pressure

    Science.gov (United States)

    Furukawa, Yoshihiro; Otake, Tsubasa; Ishiguro, Takato; Nakazawa, Hiromoto; Kakegawa, Takeshi

    2012-12-01

    We investigated the oligomerization of solid valine and the stabilities of valine and valine peptides under conditions of high temperature (150-200 °C) and high pressure (50-150 MPa). Experiments were performed under non-aqueous condition in order to promote dehydration reaction. After prolonged exposure of monomeric valine to elevated temperatures and pressures, the products were analyzed by liquid chromatography mass spectrometry comparing their retention times and masses. We identified linear peptides that ranged in size from dimer to hexamer, as well as a cyclic dimer. Previous studies that attempted abiotic oligomerization of valine in the absence of a catalyst have never reported valine peptides larger than a dimer. Increased reaction temperature increased the dissociative decomposition of valine and valine peptides to products such as glycine, β-alanine, ammonia, and amines by processes such as deamination, decarboxylation, and cracking. The amount of residual valine and peptide yields was greater at higher pressures at a given temperature, pressure, and reaction time. This suggests that dissociative decomposition of valine and valine peptides is reduced by pressure. Our findings are relevant to the investigation of diagenetic processes in prebiotic marine sediments where similar pressures occur under water-poor conditions. These findings also suggest that amino acids, such as valine, could have been polymerized to peptides in deep prebiotic marine sediments within a few hundred million years.

  4. High-temperature- and high-pressure-induced formation of the Laves-phase compound XeS2

    Science.gov (United States)

    Yan, Xiaozhen; Chen, Yangmei; Xiang, Shikai; Kuang, Xiaoyu; Bi, Yan; Chen, Haiyan

    2016-06-01

    We explore the reactivity of xenon with sulfur under high pressure, using unbiased structure searching techniques combined with first-principles calculations, which identify a stable XeS2 compound crystallized in a Laves phase with hypercoordinated (16-fold) Xe at 191 GPa and 0 K. Taking the thermal effects into account, we find that increasing the temperature could further stabilize it. The formation of XeS2 is a consequence of pressure-induced charge transfer from Xe to S atoms and the delocalization of Xe 5 p and S 3 p electrons. Meanwhile, the stabilization into a Laves phase of XeS2 is the result of delocalized chemical bonding and the need for optimum structure packing. The present discussion of the formation mechanism in XeS2 is general, and conclusions can be used to understand the formation of other Laves-phase compounds and the Xe chemistry that allows closed-shell Xe to participate in chemical reactions.

  5. Modeling Study of High Pressure and High Temperature Reservoir Fluids

    DEFF Research Database (Denmark)

    Varzandeh, Farhad

    to 250 °C and 2400 bar, in the deep petroleum reservoirs. Furthermore, many of these deep reservoirs are found offshore, including the North Sea and the Gulf of Mexico, making the development even more risky. On the other hand, development of these high pressure high temperature (HPHT) fields can...

  6. Pulse Radiolysis at High Temperatures and High Pressures

    DEFF Research Database (Denmark)

    Christensen, H.; Sehested, Knud

    1981-01-01

    A set-up enabling pulse radiolysis measurements at high temperatures (up to 320°C) and high pressures (up to 140 bar) has been constructed in collaboration between Risö National Laboratory and Studsvik Energiteknik. The cell has been used for experiments with aqueous solutions with the purpose...

  7. High-pressure-high-temperature treatment of natural diamonds

    CERN Document Server

    Royen, J V

    2002-01-01

    The results are reported of high-pressure-high-temperature (HPHT) treatment experiments on natural diamonds of different origins and with different impurity contents. The diamonds are annealed in a temperature range up to 2000 sup o C at stabilizing pressures up to 7 GPa. The evolution is studied of different defects in the diamond crystal lattice. The influence of substitutional nitrogen atoms, plastic deformation and the combination of these is discussed. Diamonds are characterized at room and liquid nitrogen temperature using UV-visible spectrophotometry, Fourier transform infrared spectrophotometry and photoluminescence spectrometry. The economic implications of diamond HPHT treatments are discussed.

  8. LHDAC setup for high temperature and high pressure studies

    Energy Technology Data Exchange (ETDEWEB)

    Patel, Nishant N., E-mail: nnpatel@barc.gov.in; Meenakshi, S., E-mail: nnpatel@barc.gov.in; Sharma, Surinder M., E-mail: nnpatel@barc.gov.in [High Pressure and Synchrotron Radiation Physics Division, Bhabha Atomic Research Centre, Mumbai-400085 (India)

    2014-04-24

    A ytterbium fibre laser (λ = 1.07 μm) based laser heated diamond anvil cell (LHDAC) facility has been recently set up at HP and SRPD, BARC for simultaneous high temperature and high pressure investigation of material properties. Synthesis of GaN was carried out at pressure of ∼9 GPa and temperature of ∼1925 K in a Mao-Bell type diamond anvil cell (DAC) using the LHDAC facility. The retrieved sample has been characterized using our laboratory based micro Raman setup.

  9. High pressure/high temperature thermogravimetric apparatus. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Calo, J.M.; Suuberg, E.M.

    1999-12-01

    The purpose of this instrumentation grant was to acquire a state-of-the-art, high pressure, high temperature thermogravimetric apparatus (HP/HT TGA) system for the study of the interactions between gases and carbonaceous solids for the purpose of solving problems related to coal utilization and applications of carbon materials. The instrument that we identified for this purpose was manufactured by DMT (Deutsche Montan Technologies)--Institute of Cokemaking and Coal Chemistry of Essen, Germany. Particular features of note include: Two reactors: a standard TGA reactor, capable of 1100 C at 100 bar; and a high temperature (HT) reactor, capable of operation at 1600 C and 100 bar; A steam generator capable of generating steam to 100 bar; Flow controllers and gas mixing system for up to three reaction gases, plus a separate circuit for steam, and another for purge gas; and An automated software system for data acquisition and control. The HP/TP DMT-TGA apparatus was purchased in 1996 and installed and commissioned during the summer of 1996. The apparatus was located in Room 128 of the Prince Engineering Building at Brown University. A hydrogen alarm and vent system were added for safety considerations. The system has been interfaced to an Ametek quadruple mass spectrometer (MA 100), pumped by a Varian V250 turbomolecular pump, as provided for in the original proposed. With this capability, a number of gas phase species of interest can be monitored in a near-simultaneous fashion. The MS can be used in a few different modes. During high pressure, steady-state gasification experiments, it is used to sample, measure, and monitor the reactant/product gases. It can also be used to monitor gas phase species during nonisothermal temperature programmed reaction (TPR) or temperature programmed desorption (TPD) experiments.

  10. Rheological assessment of nanofluids at high pressure high temperature

    Science.gov (United States)

    Kanjirakat, Anoop; Sadr, Reza

    2013-11-01

    High pressure high temperature (HPHT) fluids are commonly encountered in industry, for example in cooling and/or lubrications applications. Nanofluids, engineered suspensions of nano-sized particles dispersed in a base fluid, have shown prospective as industrial cooling fluids due to their enhanced rheological and heat transfer properties. Nanofluids can be potentially utilized in oil industry for drilling fluids and for high pressure water jet cooling/lubrication in machining. In present work rheological characteristics of oil based nanofluids are investigated at HPHT condition. Nanofluids used in this study are prepared by dispersing commercially available SiO2 nanoparticles (~20 nm) in a mineral oil. The basefluid and nanofluids with two concentrations, namely 1%, and 2%, by volume, are considered in this investigation. The rheological characteristics of base fluid and the nanofluids are measured using an industrial HPHT viscometer. Viscosity values of the nanofluids are measured at pressures of 100 kPa to 42 MPa and temperatures ranging from 25°C to 140°C. The viscosity values of both nanofluids as well as basefluid are observed to have increased with the increase in pressure. Funded by Qatar National Research Fund (NPRP 08-574-2-239).

  11. Pressure Prediction for High-Temperature and High-Pressure Formation and Its Application to Drilling in the Northern South China Sea

    Institute of Scientific and Technical Information of China (English)

    WANG Zhenfeng; XIE Xinong

    2004-01-01

    There are plentiful potential hydrocarbon resources in the Yinggehai and Qiongdongnan basins in the northern South China Sea. However, the special petrol-geological condition with high formation temperature and pressure greatly blocked hydrocarbon exploration. The conventional means of drills, including methods in the prediction and monitoring of underground strata pressure, can no longer meet the requirements in this area. The China National Offshore Oil Corporation has allocated one well with a designed depth of 3200 m and pressure coefficient of 2.3 in the Yinggehai Basin (called test well in the paper) in order to find gas reservoirs in middle-deep section in the Miocene Huangliu and analyzed the distribution of overpressure in the Yinggehai and Qiongdongnan basins, and set up a series of key technologies and methods to predict and monitor formation pressure, and then apply the results to pressure prediction of the test well. Because of the exact pressure prediction before and during drilling, associated procedure design of casing and their allocation in test well has been ensured to be more rational. This well is successfully drilled to the depth of 3485 m (nearly 300 m deeper than the designed depth) under the formation pressure about 2.3 SG (EMW), which indicate that a new step in the technology of drilling in higher temperature and pressure has been reached in the China National Offshore Oil Corporation.

  12. High pressure study of high-temperature superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Souliou, Sofia-Michaela

    2014-09-29

    The current thesis studies experimentally the effect of high external pressure on high-T{sub c} superconductors. The structure and lattice dynamics of several members of the high-T{sub c} cuprate and Fe-based superconductors families were investigated by means of Raman spectroscopy and X-ray diffraction under well-controlled, hydrostatic high pressure and low temperature conditions. The lattice dynamics of the high-T{sub c} superconductor YBa{sub 2}Cu{sub 3}O{sub 6+x} have been investigated systematically by Raman spectroscopy as a function of doping (x = 0.95, 0.75, 0.60, 0.55, and 0.45) and external pressure. Under ambient pressure conditions, in addition to the Raman modes expected from group theory, we observe new Raman active phonons upon cooling the underdoped samples, at temperatures well above the superconducting transition temperature. The doping dependence and the onset temperatures of the new Raman features suggest that they are associated with the incommensurate charge density wave (CDW) state recently discovered in underdoped cuprates using synchrotron X-ray scattering techniques. Under high pressure conditions (from 2 to 12 GPa), our Raman measurements on highly ordered underdoped YBa{sub 2}Cu{sub 3}O{sub 6.55} samples do not show any of the new Raman phonons seen at ambient pressure. High pressure and low temperature Raman measurements have been performed on the underdoped superconductor YBa{sub 2}Cu{sub 4}O{sub 8}. A clear renormalization of some of the Raman phonons is seen below T{sub c} as a result of the changes in the phonon self-energy upon the opening of the superconducting gap, with the most prominent one being that of the B{sub 1g}-like buckling phonon mode. The amplitude of this renormalization strongly increases with pressure, resembling the effect of hole doping in YBa{sub 2}Cu{sub 3}O{sub 6+x}. At ∝ 10 GPa, the system undergoes a reversible pressure-induced structural phase transition to a non-centrosymmmetric structure (space group

  13. HIGH TEMPERATURE HIGH PRESSURE THERMODYNAMIC MEASUREMENTS FOR COAL MODEL COMPOUNDS

    Energy Technology Data Exchange (ETDEWEB)

    Vinayak N. Kabadi

    2000-05-01

    The flow VLE apparatus designed and built for a previous project was upgraded and recalibrated for data measurements for this project. The modifications include better and more accurate sampling technique, addition of a digital recorder to monitor temperature and pressure inside the VLE cell, and a new technique for remote sensing of the liquid level in the cell. VLE data measurements for three binary systems, tetralin-quinoline, benzene--ethylbenzene and ethylbenzene--quinoline, have been completed. The temperature ranges of data measurements were 325 C to 370 C for the first system, 180 C to 300 C for the second system, and 225 C to 380 C for the third system. The smoothed data were found to be fairly well behaved when subjected to thermodynamic consistency tests. SETARAM C-80 calorimeter was used for incremental enthalpy and heat capacity measurements for benzene--ethylbenzene binary liquid mixtures. Data were measured from 30 C to 285 C for liquid mixtures covering the entire composition range. An apparatus has been designed for simultaneous measurement of excess volume and incremental enthalpy of liquid mixtures at temperatures from 30 C to 300 C. The apparatus has been tested and is ready for data measurements. A flow apparatus for measurement of heat of mixing of liquid mixtures at high temperatures has also been designed, and is currently being tested and calibrated.

  14. [Genesis study of omphacite at high pressure and high temperature].

    Science.gov (United States)

    Xiao, Ben-Fu; Yi, Li; Wang, Duo-Jun; Xie, Chao; Tang, Xue-Wu; Liu, Lei; Cui, Yue-Ju

    2013-11-01

    The melting and recrystallizing experiments of alkali basalt powder and mixture of pure oxides mixed as stoichiometry were performed at 3 GPa and 1 200 degrees C. Electronic microprobe analysis and Raman spectra showed that the recrystallized products were omphacites, the FWHM (full width at half maximum) of the Raman peak was narrow and its shape was sharp, which is attributed to the stable Si-O tetrahedral structure and the high degree of order in omphacite. Based on the results of previous studies, the influencing factors of omphacite genesis and its primary magma were discussed. The results showed that the formation of omphacite could be affected by many factors, such as the composition of parent rocks, the concentration of fluid in the system and the conditions of pressure and temperature. This result could support some experimental evidences on the genesis studies of omphacite and eclogite.

  15. In Situ Observation of Gypsum-Anhydrite Transition at High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    LIU Chuan-Jiang; ZHENG Hai-Fei

    2012-01-01

    An in-situ Raman spectroscopic study of gypsum-anhydrite transition under a saturated water condition at high pressure and high temperature is performed using a hydrothermal diamond anvil cell (HDAC).The experimental results show that gypsum dissolvs in water at ambient temperature and above 496 MPa.With increasing temperature,the anhydrite (CaSO4) phase precipitates at 250 320℃ in the pressure range of 1.0 1.5 GPa,indicating that under a saturated water condition,both stable conditions of pressure and temperature and high levels of Ca and SO4 ion concentrations in aqueous solution are essential for the formation of anhydrite.A linear relationship between the pressure and temperature for the precipitation of anhydrite is established as P(GPa) =0.0068T - 0.7126 (250℃≤T≤320℃).Anhydrite remained stable during rapid cooling of the sample chamber,showing that the gypsum-anhydrite transition involving both dissolution and precipitation processes is irreversible at high pressure and high temperature.%An in-situ Raman spectroscopic study of gypsum-anhydrite transition under a saturated water condition at high pressure and high temperature is performed using a hydrothermal diamond anvil cell (HDAC). The experimental results show that gypsum dissolvs in water at ambient temperature and above 496 Mpa. With increasing temperature, the anhydrite (CaSO4) phase precipitates at 250-320℃ in the pressure range of 1.0-1.5 Gpa, indicating that under a saturated water condition, both stable conditions of pressure and temperature and high levels of Ca and SO4 ion concentrations in aqueous solution are essential for the formation of anhydrite. A linear relationship between the pressure and temperature for the precipitation of anhydrite is established as P(Gpa) = 0.0068T - 0.7126 (250℃≤T≤320℃). Anhydrite remained stable during rapid cooling of the sample chamber, showing that the gypsum-anhydrite transition involving both dissolution and precipitation processes is

  16. Aqueous Geochemistry at High Pressures and High Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Bass, Jay D. [Univ. of Illinois, Urbana-Champaign, IL (United States)

    2015-05-21

    This project is aimed at experimental characterization of the sound velocities, equations of state (EOS), and derived physical and chemical properties of aqueous solutions and carbon dioxide at extreme pressure and temperature conditions relevant to processes occurring in the interior of the Earth. Chemical transport, phase changes (including melting), fluid-solid reactions, and formation of magmatic liquids at convergent plat boundaries are a key motivation for this project. Research in this area has long been limited by the extreme experimental challenges and lack of data under the appropriate pressure-temperature (P-T) conditions. The vast majority of studies of aqueous geochemistry relevant to terrestrial problems of fluid-rock interactions have been conducted at 0.3 GPa or less, and the widely used Helgeson-Kirkham-Flowers equation of state for aqueous species is applicable only at ~ < 0.5 GPa. These limits are unfortunate because fluid flow and reactions plays a central role in many deeper environments. Recent efforts including our own, have resulted in new experimental techniques that now make it possible to investigate properties of homogeneous and heterogeneous equilibria involving aqueous species and minerals over a much broader range of pressure and temperature appropriate for deep crustal and upper mantle processes involving water-rich fluids. We carried out 1) Brillouin scattering measurements of the equations of state and molar volume of water and carbon dioxide to over 10 GPa and 870K using precise resistance heating of samples under pressure in the diamond anvil cell, and 2) the phase diagrams of the water and CO2, and 3) Exploring new experimental approaches, including CO2 laser heating of samples in a diamond cell, to measurements of sound velocities, EOS, and phase relations by Brillouin scattering to far greater pressures and temperatures.

  17. Advanced High-Temperature, High-Pressure Transport Reactor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Swanson

    2005-08-30

    The transport reactor development unit (TRDU) was modified to accommodate oxygen-blown operation in support of a Vision 21-type energy plex that could produce power, chemicals, and fuel. These modifications consisted of changing the loop seal design from a J-leg to an L-valve configuration, thereby increasing the mixing zone length and residence time. In addition, the standpipe, dipleg, and L-valve diameters were increased to reduce slugging caused by bubble formation in the lightly fluidized sections of the solid return legs. A seal pot was added to the bottom of the dipleg so that the level of solids in the standpipe could be operated independently of the dipleg return leg. A separate coal feed nozzle was added that could inject the coal upward into the outlet of the mixing zone, thereby precluding any chance of the fresh coal feed back-mixing into the oxidizing zone of the mixing zone; however, difficulties with this coal feed configuration led to a switch back to the original downward configuration. Instrumentation to measure and control the flow of oxygen and steam to the burner and mix zone ports was added to allow the TRDU to be operated under full oxygen-blown conditions. In total, ten test campaigns have been conducted under enriched-air or full oxygen-blown conditions. During these tests, 1515 hours of coal feed with 660 hours of air-blown gasification and 720 hours of enriched-air or oxygen-blown coal gasification were completed under this particular contract. During these tests, approximately 366 hours of operation with Wyodak, 123 hours with Navajo sub-bituminous coal, 143 hours with Illinois No. 6, 106 hours with SUFCo, 110 hours with Prater Creek, 48 hours with Calumet, and 134 hours with a Pittsburgh No. 8 bituminous coal were completed. In addition, 331 hours of operation on low-rank coals such as North Dakota lignite, Australian brown coal, and a 90:10 wt% mixture of lignite and wood waste were completed. Also included in these test campaigns was

  18. Temperature uniformity mapping in a high pressure high temperature reactor using a temperature sensitive indicator

    NARCIS (Netherlands)

    Grauwet, T.; Plancken, van der I.; Vervoort, L.; Matser, A.M.; Hendrickx, M.; Loey, van A.

    2011-01-01

    Recently, the first prototype ovomucoid-based pressure–temperature–time indicator (pTTI) for high pressure high temperature (HPHT) processing was described. However, for temperature uniformity mapping of high pressure (HP) vessels under HPHT sterilization conditions, this prototype needs to be optim

  19. Interface Instability of Diamond Crystals at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    尹龙卫; 李木森; 许斌; 崔建军; 郝兆印

    2002-01-01

    Diamond growth instability at high temperature and high pressure (HPHT) has been elucidated by observing the cellular interface in diamond crystals. The HPHIT diamond crystals grow layer by layer from solution of carbon in the molten catalyst. In the growth of any other crystals from solution, the growth interface is not stable and should be of the greatest significance to understand further the diamond growth mechanism. During the diamond growth, the carbon atoms are delivered to the growing diamond crystal by diffusion through a diamond crystal-solution boundary layer. In front of the boundary layer, there is a narrow constitutional supercooling zone related to the solubility difference between diamond and graphite in the molten catalyst. The diamond growth stability is broken, and the flat or planar growth interface transforms into a cellular interface due to the light supercooling. The phenomenon of solute trails in the diamonds was observed, the formation of solute trails was closely associated with the cellular interface.

  20. Effect of high pressure high temperature processing on the volatile fraction of differently coloured carrots.

    Science.gov (United States)

    Kebede, Biniam T; Grauwet, Tara; Palmers, Stijn; Vervoort, Liesbeth; Carle, Reinhold; Hendrickx, Marc; Van Loey, Ann

    2014-06-15

    To get deeper insight into the effect of high pressure high temperature (HPHT) processing on the volatile fraction of carrots, differently coloured cultivars exhibiting orange, purple, red and yellow hues were investigated. The impact of HPHT sterilisation was compared with thermal sterilisation based on equivalent microbiological inactivation. The results of this study demonstrated HPHT sterilisation to exert a distinct effect on important chemical reactions in comparison to thermal sterilisation. A comprehensive integration of MS-based metabolomic fingerprinting (HS-SPME-GC-MS) and chemometric tools has been implemented as an untargeted multivariate screening tool to identify differences. In all carrot cultivars, two dominant discriminative quality-related reactions were found: oxidative degradation and the Maillard reaction. Regarding the first reaction, oxidative terpenes, free fatty acids and carotenoids degradation products were detected at higher levels after HPHT sterilisation. Regarding the latter reaction, HPHT sterilisation appeared to suppress the formation of Maillard and Strecker degradation products.

  1. Comparison of Diesel Spray Combustion in Different High-temperature, High-pressure Facilities

    DEFF Research Database (Denmark)

    Pickett, Lyle M.; Genzale, Caroline L.; Bruneaux, Gilles

    2010-01-01

    Diesel spray experimentation at controlled high-temperature and high-pressure conditions is intended to provide a more fundamental understanding of diesel combustion than can be achieved in engine experiments. This level of understanding is needed to develop the high-fidelity multi-scale CFD mode...

  2. High temperature and high pressure gas cell for quantitative spectroscopic measurements

    DEFF Research Database (Denmark)

    Christiansen, Caspar; Stolberg-Rohr, Thomine; Fateev, Alexander

    2016-01-01

    A high temperature and high pressure gas cell (HTPGC) has been manufactured for quantitative spectroscopic measurements in the pressure range 1-200 bar and temperature range 300-1300 K. In the present work the cell was employed at up to 100 bar and 1000 K, and measured absorption coefficients...

  3. Design of Protection System for High Temperature and High Pressure Test Loop

    Institute of Scientific and Technical Information of China (English)

    ZHANG; Ming-kui; XU; Qi-guo; JIA; Yu-wen

    2012-01-01

    <正>High temperature and high pressure test loop is a research platform of China Advanced Research Reactor (CARR). Dedicated protection system is designed for safety of test loop and the reactor. Postulated initiating event related to test loop operation is analyzed, thereafter, protection variables are determined. 3 independent redundant measure channels are designed for each protection variable

  4. Transformation of ZSM-5 Zeolite Under High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    刘晓旸; 赵旭东; 侯为民; 苏文辉

    1994-01-01

    The effect of pressure and temperature on the stability of all-silicon ZSM-5 zeolite is re-ported for the first time.It has been found that ZSM-5 zeolite is directly transformed into ZSM-11 zeolite un-der the pressure of 4.0 GPa at room temperature and that this transformation is irreversible.ZSM-5 zeoliteis transformed into β-quartz by high pressure quenching,which is obtained for the first time at room temper-ature,and coesite under high pressure and high temperature.

  5. Phase transitions in Cd3P2 at high pressures and high temperatures

    DEFF Research Database (Denmark)

    Yel'kin, F.S.; Sidorov, V.A.; Waskowska, A.;

    2008-01-01

    The high-pressure, high-temperature structural behaviour of Cd3P2 has been studied using electrical resistance measurements, differential thermal analysis, thermo baric analysis and X-ray diffraction. At room temperature, a phase transformation is observed at 4.0 GPa in compression....... The experimental zero-pressure bulk modulus of the low-pressure phase is 64.7(7) GPa, which agrees quite well with the calculated value of 66.3 GPa using the tight-binding linear muffin-tin orbital method within the local density approximation. Tentatively, the high-pressure phase has an orthorhombic crystal...

  6. Plasma etching of cavities into diamond anvils for experiments at high pressures and high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Weir, S.T.; Cynn, H.; Falabella, S.; Evans, W.J.; Aracne-Ruddle, C.; Farber, D.; Vohra, Y.K. (LLNL); (UAB)

    2012-10-23

    We describe a method for precisely etching small cavities into the culets of diamond anvils for the purpose of providing thermal insulation for samples in experiments at high pressures and high temperatures. The cavities were fabricated using highly directional oxygen plasma to reactively etch into the diamond surface. The lateral extent of the etch was precisely controlled to micron accuracy by etching the diamond through a lithographically fabricated tungsten mask. The performance of the etched cavities in high-temperature experiments in which the samples were either laser heated or electrically heated is discussed.

  7. Modeling for thermal contact resistance of frictional interface under high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    湛利华; 李晓谦; 胡仕成; 曹俊

    2002-01-01

    According to the thermodynamic characteristics in the work interface of the plastic forming of metals, a set of TCR (thermal contact resistance) experimental system under the conditions of high temperature and high pressure has been designed. The interrelations between the thermal contact resistance (TCR) and its influence factors such as contact pressure etc, are obtained. A modified coefficient E is introduced to consider the relative slide in the contact interface. Then the interfacial TCR calculating model, which suits to the special conditions of ‘high temperature+plastic rheology' and frictional contact such as continuous roll casting process, is established.

  8. Inelastic X-ray scattering experiments at extreme conditions: high temperatures and high pressures

    Directory of Open Access Journals (Sweden)

    S.Hosokawa

    2008-03-01

    Full Text Available In this article, we review the present status of experimental techniques under extreme conditions of high temperature and high pressure used for inelastic X-ray scattering (IXS experiments of liquid metals, semiconductors, molten salts, molecular liquids, and supercritical water and methanol. For high temperature experiments, some types of single-crystal sapphire cells were designed depending on the temperature of interest and the sample thickness for the X-ray transmission. Single-crystal diamond X-ray windows attached to the externally heated high-pressure vessel were used for the IXS experiment of supercritical water and methanol. Some typical experimental results are also given, and the perspective of IXS technique under extreme conditions is discussed.

  9. Standard guide for corrosion tests in high temperature or high pressure environment, or both

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2010-01-01

    1.1 This guide covers procedures, specimens, and equipment for conducting laboratory corrosion tests on metallic materials under conditions of high pressure (HP) or the combination of high temperature and high pressure (HTHP). See for definitions of high pressure and temperature. 1.2 Tests conducted under HP or HTHP by their nature have special requirements. This guide establishes the basic considerations that are necessary when these conditions must be incorporated into laboratory corrosion tests. 1.3 The procedures and methods in this guide are applicable for conducting mass loss corrosion, localized corrosion, and electrochemical tests as well as for use in environmentally induced cracking tests that need to be conducted under HP or HTHP conditions. 1.4 The primary purpose for this guide is to promote consistency of corrosion test results. Furthermore, this guide will aid in the comparison of corrosion data between laboratories or testing organizations that utilize different equipment. 1.5 The values s...

  10. Laser-Machined Microcavities for Simultaneous Measurement of High-Temperature and High-Pressure

    Directory of Open Access Journals (Sweden)

    Zengling Ran

    2014-08-01

    Full Text Available Laser-machined microcavities for simultaneous measurement of high-temperature and high-pressure are demonstrated. These two cascaded microcavities are an air cavity and a composite cavity including a section of fiber and an air cavity. They are both placed into a pressure chamber inside a furnace to perform simultaneous pressure and high-temperature tests. The thermal and pressure coefficients of the short air cavity are ~0.0779 nm/°C and ~1.14 nm/MPa, respectively. The thermal and pressure coefficients of the composite cavity are ~32.3 nm/°C and ~24.4 nm/MPa, respectively. The sensor could be used to separate temperature and pressure due to their different thermal and pressure coefficients. The excellent feature of such a sensor head is that it can withstand high temperatures of up to 400 °C and achieve precise measurement of high-pressure under high temperature conditions.

  11. Bismuth Vanadate: A High-Pressure, High-Temperature Crystallographic Study of the Ferroelastic-Paraelastic Transition

    Science.gov (United States)

    Hazen, R. M.; Mariathasan, J. W. E.

    1982-05-01

    Lattice dimensions of bismuth vanadate have been determined under 37 different high-pressure or high-temperature conditions or a combination of these conditions. New high-pressure, high-temperature, single-crystal x-ray techniques were used to bracket the reversible monoclinic (ferroelastic) to tetragonal (paraelastic) transition.

  12. Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity

    Science.gov (United States)

    Niu, Zhe; Zhao, Yulong; Tian, Bian

    2014-01-01

    This paper describes a design method for optimizing sensitivity of piezoresistive pressure sensor in high-pressure and high-temperature environment. In order to prove the method, a piezoresistive pressure sensor (HPTSS) is designed. With the purpose of increasing sensitivity and to improve the measurement range, the piezoresistive sensor adopts rectangular membrane and thick film structure. The configuration of piezoresistors is arranged according to the characteristic of the rectangular membrane. The structure and configuration of the sensor chip are analyzed theoretically and simulated by the finite element method. This design enables the sensor chip to operate in high pressure condition (such as 150 MPa) with a high sensitivity and accuracy. The silicon on insulator wafer is selected to guarantee the thermo stability of the sensor chip. In order to optimize the fabrication and improve the yield of production, an electric conduction step is devised. Series of experiments demonstrates a favorable linearity of 0.13% and a high accuracy of 0.48%. And the sensitivity of HTPSS is about six times as high as a conventional square-membrane sensor chip in the experiment. Compared with the square-membrane pressure sensor and current production, the strength of HPTTS lies in sensitivity and measurement. The performance of the HPTSS indicates that it could be an ideal candidate for high-pressure and high-temperature sensing in real application.

  13. Design optimization of high pressure and high temperature piezoresistive pressure sensor for high sensitivity.

    Science.gov (United States)

    Niu, Zhe; Zhao, Yulong; Tian, Bian

    2014-01-01

    This paper describes a design method for optimizing sensitivity of piezoresistive pressure sensor in high-pressure and high-temperature environment. In order to prove the method, a piezoresistive pressure sensor (HPTSS) is designed. With the purpose of increasing sensitivity and to improve the measurement range, the piezoresistive sensor adopts rectangular membrane and thick film structure. The configuration of piezoresistors is arranged according to the characteristic of the rectangular membrane. The structure and configuration of the sensor chip are analyzed theoretically and simulated by the finite element method. This design enables the sensor chip to operate in high pressure condition (such as 150 MPa) with a high sensitivity and accuracy. The silicon on insulator wafer is selected to guarantee the thermo stability of the sensor chip. In order to optimize the fabrication and improve the yield of production, an electric conduction step is devised. Series of experiments demonstrates a favorable linearity of 0.13% and a high accuracy of 0.48%. And the sensitivity of HTPSS is about six times as high as a conventional square-membrane sensor chip in the experiment. Compared with the square-membrane pressure sensor and current production, the strength of HPTTS lies in sensitivity and measurement. The performance of the HPTSS indicates that it could be an ideal candidate for high-pressure and high-temperature sensing in real application.

  14. High-pressure high-temperature phase diagram of organic crystal paracetamol

    Science.gov (United States)

    Smith, Spencer J.; Montgomery, Jeffrey M.; Vohra, Yogesh K.

    2016-01-01

    High-pressure high-temperature (HPHT) Raman spectroscopy studies have been performed on the organic crystal paracetamol in a diamond anvil cell utilizing boron-doped heating diamond anvil. Isobaric measurements were conducted at pressures up to 8.5 GPa and temperature up to 520 K in five different experiments. Solid state phase transitions from monoclinic Form I  →  orthorhombic Form II were observed at various pressures and temperatures as well as transitions from Form II  →  unknown Form IV. The melting temperature for paracetamol was observed to increase with increasing pressures to 8.5 GPa. This new data is combined with previous ambient temperature high-pressure Raman and x-ray diffraction data to create the first HPHT phase diagram of paracetamol.

  15. Stability of Dy{sub 6}UO{sub 12} under high pressure and high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Shukla, Balmukund; Sanjay Kumar, N.R.; Sekar, M. [Condensed Matter Physics Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102 Tamil Nadu (India); Chandra Shekar, N.V., E-mail: chandru@igcar.gov.in [Condensed Matter Physics Division, Materials Science Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102 Tamil Nadu (India); Jena, H.; Asuvathraman, R. [Materials Chemistry Division, Chemistry Group, Indira Gandhi Centre for Atomic Research, Kalpakkam, 603102 Tamil Nadu (India)

    2016-07-05

    In this paper, results obtained from high pressure-high temperature X-ray diffraction study of Dy{sub 6}UO{sub 12} are reported. X-ray diffraction (XRD) studies at ambient temperature on Dy{sub 6}UO{sub 12} reveals that the rhombohedral structure is stable up to 21.6 GPa. Beyond 21.6 GPa the peaks broaden out substantially indicating emergence of disorder in the system. Bulk modulus and its pressure derivative is 144 GPa and 7.0 respectively. High Pressure and High Temperature (HP-HT) XRD studies up to ∼ 11 GPa and ∼673 K was carried out using novel combination of membrane cell DAC coupled to a high flux micro-focus X-ray generator. At ambient pressure, thermal expansion coefficient comes out to be 14.5 × 10{sup −6} K{sup −1} at 400 K. Further, at 1 GPa and 2.6 GPa the thermal expansion coefficients are 21.4 × 10{sup −6} K{sup −1} and 32 × 10{sup −6} K{sup −1} respectively, in the temperature range ∼293–673 K. The thermal expansion coefficient shows an increasing trend with pressure. - Highlights: • First report on high pressure-high temperature (HP-HT) structural study of Dy{sub 6}UO{sub 12}. • HP studies show structural stability up to 21 GPa in rhombohedral structure. • Pressure induced structural disorder seen above 21 GPa. • HP-HT studies show that Dy{sub 6}UO{sub 12} remains stable up to 11.3 GPa and ∼673 K. • The thermal expansion coefficients increase with pressure.

  16. The reactions of CuO at high pressure and high temperature

    CERN Document Server

    Ren, G Z; Wang, X C; Ma, H A; Guo, X B; Liu, J T; Zou Guang Tian

    2002-01-01

    The decomposition behaviour of CuO is studied at high temperature and high pressure. Experimental pressure and temperature determine the result. In the region of higher temperature and pressure (>=5.5 GPa, >=1400 deg. C), the product is just copper. In the region of lower temperature and pressure (< 5.0 GPa, < 1100 deg. C), CuO does not decompose. Between the two regions, the product is a mixture of Cu and Cu sub 2 O or a mixture of Cu sub 2 O and CuO.

  17. Preparative and structural extension of oxoborate chemistry through high-pressure/high-temperature syntheses

    Energy Technology Data Exchange (ETDEWEB)

    Huppertz, Hubert; Emme, Holger [Department Chemie, Ludwig-Maximilians-Universitaet Muenchen, Butenandtstrasse 5-13 (Haus D), D-81377 Munich (Germany)

    2004-04-14

    High-pressure/high-temperature conditions were used to synthesize the new rare earth oxoborates Ln{sub 4}B{sub 6}O{sub 15} (Ln = Dy, Ho; 8.0 GPa, 1000 deg. C) and {alpha}-Ln{sub 2}B{sub 4}O{sub 9} (Ln = Eu, Gd, Tb, Dy; 10.0 GPa, 1150 deg. C) in a Walker-type multianvil apparatus. In addition to their new compositions, which were unattainable under normal pressure conditions, the structures exhibit the new structural motif of edge sharing BO{sub 4} tetrahedra leading to a structural extension of oxoborate chemistry.

  18. Structural modifications of GeO2 glass under high pressure and high temperature

    Science.gov (United States)

    Cornet, Antoine; Molherac, Rémy; Champagnon, Bernard; Martinet, Christine

    2016-09-01

    Vitreous GeO2 has been compressed at high temperature to investigate the effect of thermal activation on the structural reorganization during compression. The measurements were performed in-situ using micro Raman spectroscopy under pressure up to 6 GPa and temperature up to 400 °C. The evolution of the Raman shift of the main band (400-500 cm-1) with temperature during compression evidences a pressure window around 3 GPa within which temperature has a remarkable influence on the structure, in particular, the intermediate range order. We find that this change is well correlated with previous ex-situ density measurements from high pressure-high temperature densifications. Moreover, coordination changes from tetrahedrally (GeO4) to octahedrally (GeO6) coordinated GeO2 are accelerated with the heating during the compression.

  19. Kinetics of diamond-silicon reaction under high pressure-high temperature conditions

    Science.gov (United States)

    Pantea, Cristian

    In this dissertation work, the kinetics of the reaction between diamond and silicon at high pressure-high temperature conditions was investigated. This study was motivated by the extremely limited amount of information related to the kinetics of the reaction in diamond-silicon carbide composites formation. It was found that the reaction between diamond and melted silicon and the subsequent silicon carbide formation is a two-stage process. The initial stage is a result of direct reaction of melted silicon with carbon atoms from the diamond surface, the phase boundary reaction. Further growth of SiC is much more complicated and when the outer surfaces of diamond crystals are covered with the silicon carbide layer it involves diffusion of carbon and silicon atoms through the SiC layer. The reaction takes place differently for the two regions of stability of carbon. In the graphite-stable region, the reaction between diamond and melted silicon is associated with the diamond-to-graphite phase transition, while in the diamond-stable region there is no intermediary step for the reaction. The data obtained at HPHT were fitted by the Avrami-Erofeev equation. It was found that the reaction is isotropic, the beta-SiC grown on different faces of the diamond crystals showing the same reaction rate, and that the controlling mechanism for the reaction is the diffusion. In the graphite-stable region the activation energy, 402 kJ/mol is slightly higher than in the diamond-stable region, 260 kJ/mol, as the reaction between diamond and melted silicon is associated with the diamond-to-graphite phase transition, which has higher activation energy. In the diamond-stable region, the calculated activation energy is higher for micron size diamond powders (≈260 kJ/mol), while for nanocrystalline diamond powders a lower value of 170 kJ/mol was obtained. This effect was attributed to nanocrystalline structure and strained bonds within grain boundaries in SiC formed from nanosize diamond

  20. Behaviors of Zn2GeO4 under high pressure and high temperature

    Science.gov (United States)

    Shu-Wen, Yang; Fang, Peng; Wen-Tao, Li; Qi-Wei, Hu; Xiao-Zhi, Yan; Li, Lei; Xiao-Dong, Li; Duan-Wei, He

    2016-07-01

    The structural stability of Zn2GeO4 was investigated by in-situ synchrotron radiation angle dispersive x-ray diffraction. The pressure-induced amorphization is observed up to 10 GPa at room temperature. The high-pressure and high-temperature sintering experiments and the Raman spectrum measurement firstly were performed to suggest that the amorphization is caused by insufficient thermal energy and tilting Zn-O-Ge and Ge-O-Ge bond angles with increasing pressure, respectively. The calculated bulk modulus of Zn2GeO4 is 117.8 GPa from the pressure-volume data. In general, insights into the mechanical behavior and structure evolution of Zn2GeO4 will shed light on the micro-mechanism of the materials variation under high pressure and high temperature. Project supported by the Joint Fund of the National Natural Science Foundation of China and Chinese Academy of Sciences (Grant No. U1332104).

  1. The viscosity and density of sour gas fluids at high temperatures and high pressures

    Energy Technology Data Exchange (ETDEWEB)

    Giri, B.R.; Marriott, R.A.; Blais, P.; Clark, P.D. [Alberta Sulphur Research Ltd., Calgary, AB (Canada); Calgary Univ., AB (Canada). Dept. of Chemistry

    2010-01-15

    This poster session discussed an experiment designed to measure the viscosity and density of sour gas fluids at high temperatures and pressures. An option for disposing acid gases while enhancing the production of oil and gas fields is the re-injection of gases rich in hydrogen sulphide/carbon dioxide (H{sub 2}S/CO{sub 2}) into reservoirs up to very high pressures, but issues with respect to corrosion, compression, pumping, and transport need addressing, and the reliable high-density/high-pressure data needed to arrive at an optimum process concept and the design of pumps, compressors, and transport lines had up to this point been lacking. The experimental set up involved the use of a Vibrating Tube Densimeter and a Cambridge Viscometer. Working with toxic gases at very high pressures and obtaining highly accurate data in a wide range of conditions were two of the challenges faced during the experiment. The experiment resulted in physical property measurement systems being recalibrated and a new daily calibration routine being adopted for accuracy. The densities and viscosities of pure CO{sub 2} and sulphur dioxide (SO{sub 2}) in a wide pressure and temperature range were determined. 1 tab., 9 figs.

  2. High-Pressure High-Temperature Phase Diagram of the Organic Crystal Paracetamol

    Science.gov (United States)

    Smith, Spencer; Montgomery, Jeffrey; Vohra, Yogesh

    High-pressure high-temperature (HPHT) Raman spectroscopy studies have been performed on the organic crystal paracetamol in a diamond anvil cell utilizing boron-doped diamond as heating anvil. The HPHT data obtained from boron-doped diamond heater is cross-checked with data obtained using a standard block heater diamond anvil cell. Isobaric measurements were conducted at pressures up to 8.5 GPa and temperature up to 520 K in a number of different experiments. Solid state phase transitions from monoclinic Form I --> orthorhombic Form II were observed at various pressures and temperatures as well as transitions from Form II --> unknown Form IV. The melting temperature for paracetamol was observed to increase with increasing pressures to 8.5 GPa. Our previous angle dispersive x-ray diffraction studies at the Advanced Photon Source has confirmed the existence of two unknown crystal structures Form IV and Form V of paracetamol at high pressure and ambient temperature. The phase transformation from Form II to Form IV occurs at ~8.5 GPa and from Form IV to Form V occurs at ~11 GPa at ambient temperature. Our new data is combined with the previous ambient temperature high-pressure Raman and X- ray diffraction data to create the first HPHT phase diagram of paracetamol. Doe-NNSA Carnegie DOE Alliance Center (CDAC) under Grant Number DE-NA0002006.

  3. Equations of state of ice VI and ice VII at high pressure and high temperature.

    Science.gov (United States)

    Bezacier, Lucile; Journaux, Baptiste; Perrillat, Jean-Philippe; Cardon, Hervé; Hanfland, Michael; Daniel, Isabelle

    2014-09-14

    High-pressure H2O polymorphs among which ice VI and ice VII are abundant in the interiors of large icy satellites and exo-planets. Knowledge of the elastic properties of these pure H2O ices at high-temperature and high-pressure is thus crucial to decipher the internal structure of icy bodies. In this study we assess for the first time the pressure-volume-temperature (PVT) relations of both polycrystalline pure ice VI and ice VII at high pressures and temperatures from 1 to 9 GPa and 300 to 450 K, respectively, by using in situ synchrotron X-ray diffraction. The PVT data are adjusted to a second-order Birch-Murnaghan equation of state and give V0 = 14.17(2) cm(3) mol(-1), K0 = 14.05(23) GPa, and α0 = 14.6(14) × 10(-5) K(-1) for ice VI and V0 = 12.49(1) cm(3) mol(-1), K0 = 20.15(16) GPa, and α0 = 11.6(5) × 10(-5) K(-1) for ice VII.

  4. Thermoset recycling via high-pressure high-temperature sintering: Revisiting the effect of interchange chemistry

    Science.gov (United States)

    Morin, Jeremy Edward

    In 1844 Charles Goodyear obtained U.S. Patent #3,633 for his "Gum Elastic Composition". In a published circular, which describes his patent for the sulfur vulcanization of gum elastic composition, he stated: "No degree of heat, without blaze, can melt it (rubber)... It resists the most powerful chemical reagents. Aquafortis (nitric acid), sulphuric acid, essential and common oils, turpentine and other solvents... ..." Goodyear's sulfur vulcanization of rubber fueled much of the industrial revolution and made transportation possible, as it exists today. In doing so, Goodyear created one of the most difficult materials to recycle. Rubber will not melt, dissolve, or lend itself to the usual methods of chemical decomposition. Ironically, Goodyear recognized this problem and in 1853 he patented the process of adding ground rubber to virgin material, now currently known as regrind blending. Today, scrap tires represent one of the most serious sources of pollution in the world. Studies estimate that there are roughly 2 billion scrap tires in U.S. landfills and more are being added at a rate of over 273 million tires per year. Current methods of recycling waste tires are crude, ineffective, and use rubber powder as a low cost filler instead of a new rubber. The groundwork for a very simple and effective method of producing high-quality rubber goods using 100% scrap rubber was discovered in 1944 by A. V. Tobolsky et al. This application, however, was not recognized until recently in our laboratory. The process as studied to date represents a method of creating quality, high-value added rubber goods with nothing other than heat and pressure. High pressure is required to obtain a void-free compaction of the rubber particles by forcing all of the free surfaces into intimate contact. High temperature then activates the chemical rearrangement, scission, and reformation of the chemical bonds thus providing new bridges between the once fractured interfaces. This occurs both within

  5. Elastic properties of {alpha}-iron at high temperatures by high-pressure neutron scattering

    Energy Technology Data Exchange (ETDEWEB)

    Klotz, S; Cornelius, A L; Philippe, J [IMPMC, Universite P and M Curie, 4 Place Jussieu, C115, 75252 Paris (France); Straessle, Th; Pomjakushin, V, E-mail: Stefan.Klotz@impmc.upmc.fr [Laboratory for Neutron Scattering, Paul Scherrer Institut, 5232 Villigen PSI (Switzerland)

    2011-02-09

    We present high pressure-high temperature neutron diffraction data of {alpha}-iron in the 0-8 GPa and 300-550 K range. We find the isochors of {alpha}-iron strictly parallel to those of {epsilon}-iron, except at high P/T when the {alpha}-{gamma}-{epsilon} triple point to the non-magnetic {gamma}- and {epsilon}-phases is approached. This gives evidence for magnetoelastic effects in {alpha}-iron at high P/T. The measurements have been made possible by the use of a cell which enables neutron diffraction by external heating in the 0-10 GPa range and to at least 550 K. The technique should have numerous applications in research on condensed matter using neutrons.

  6. Enrichment of vanillin in barley malt by hydrolysis in high temperature and high pressure steam.

    Science.gov (United States)

    Nakahara, Koichi; Kageyama, Norihiko; Nagami, Kenzo

    2012-12-19

    Malted barley was treated with saturated steam at temperatures ranging from 180 to 220 °C, that is, high temperature and high pressure steam (HHS), and a control sample exposed to saturated liquid water in the same temperature range. The malt treated in steam was extracted with water (70 °C) for 15 min after drying. Vanillin which gave beer preferable flavor was detected in all malt extracts, both after treatment with steam and in effluent from malt exposed to liquid water. Hydrolysis of ingredients in the malt occurred even in steam. The treatment of natural products in HHS could be a new thermal technique to provide a special ingredient for food industry, for example, malt for beer.

  7. Phase Transition and EOS of Cinnabar (α-HgS) at High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    FAN Da-Wei; ZHOU Wen-Ge; LIU Cong-Qiang; WAN Fang; XING Yin-Suo; LIU Jing; LI Yan-Chun; XIE Hong-Sen

    2009-01-01

    @@ Phase relations and equation of state (EOS) of natural cinnabar (α-HgS) are investigated by high-pressure and high-temperature synchrotron x-ray powder diffraction. The unambiguous cinnabar-rocksalt structure phase boundaries are determined to be Plower(Gpa)=15.54-0.014T(℃) and Pupper(Gpa)= 23.84 - 0.014T(℃) at 300--623K. With K' axed at 4, we obtain K0 = 37(4) Gpa, ( K/ T)p=-0.025(2) GPaK-1, and α0= 3.79(20)× 10-5 K-1 for the cinnabar phase of α-HgS. The ( K/ T)p and α0 of cinnabar phase are obtained for the first time. A nearly isotropic compression of cinnabar phase is observed by linear regressions.

  8. Global buckling assessment of high pressure and high temperature (HP/HT) offshore pipeline

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Seung-Ho; Jung, Jong-Jin; Lee, Woo-Seob [Maritime Research Institute, Hyundai Heavy Industries, Ulsan, (Korea, Republic of); Kim, Yun-Hak; Kim, Jong-Bae [Offshore Installation Engineering Department, Hyundai Heavy Industries, Ulsan, (Korea, Republic of)

    2010-07-01

    High pressure and high temperature (HP/HT) offshore pipelines are frequently subjected to lateral buckling due to excessive compressive axial force. Several control processes have been designed such as sleepers to reduce lateral buckling. This paper investigated the effect of the introduction of sleepers as buckle triggers on the behavior of HP/HT pipelines. A 3D finite element analysis using ABAQUS software was performed to simulate concrete sleepers and a profile of the seabed. The analysis criteria were the buckling amplitude, Von Mises stress, equivalent plastic strain and the effective axial force on the pipeline. A case study for HP/HT pipeline was been carried out based on installation surveys. Comparisons between the results from a model without buckle trigger and those from a model with buckle trigger were carried out. It was found that the change to the support structure, adding a buckle trigger, affected the behaviour of the pipeline considerably.

  9. High-temperature high-pressure calorimeter for studying gram-scale heterogeneous chemical reactions

    Science.gov (United States)

    MacLeod, B. P.; Schauer, P. A.; Hu, K.; Lam, B.; Fork, D. K.; Berlinguette, C. P.

    2017-08-01

    We present an instrument for measuring pressure changes and heat flows of physical and chemical processes occurring in gram-scale solid samples under high pressures of reactive gases. Operation is demonstrated at 1232 °C under 33 bars of pure hydrogen. Calorimetric heat flow is inferred using a grey-box non-linear lumped-element heat transfer model of the instrument. Using an electrical calibration heater to deliver 900 J/1 W pulses at the sample position, we demonstrate a dynamic calorimetric power resolution of 50 mW when an 80-s moving average is applied to the signal. Integration of the power signal showed that the 900 J pulse energy could be measured with an average accuracy of 6.35% or better over the temperature range 150-1100 °C. This instrument is appropriate for the study of high-temperature metal hydride materials for thermochemical energy storage.

  10. Non-metallic catalysts for diamond synthesis under high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    孙力玲; 吴奇; 戴道扬; 张君; 秦志成; 王文魁

    1999-01-01

    Recent results on conversion from graphite to diamond by aid of non-metallic catalysts are reviewed. The current status of experimental advances is presented and typical examples from relevant literature are provided for understanding the mechanism of the graphite-diamond conversion by aid of these non-metallic catalysts. Furthermore, a tendency of graphite-diamond transformation assisted by carbonates, sulfates or phosphorus under high pressure and high temperature has been investigated by calculating the activation energy and transformation probability of the carbon atoms over a potential barrier. It was found that the activation energy is highly sensitive to the catalyst chosen. The probability sequence of graphite-diamond transformation with these catalysts was put forward.

  11. Design and analysis of a high pressure and high temperature sulfuric acid experimental system

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung-Deok, E-mail: sdhong1@kaeri.re.kr [Korea Atomic Energy Research Institute, Yuseong-Gu, Daejeon 305-600 (Korea, Republic of); Kim, Chan-Soo; Kim, Yong-Wan [Korea Atomic Energy Research Institute, Yuseong-Gu, Daejeon 305-600 (Korea, Republic of); Seo, Dong-Un; Park, Goon-Cherl [Seoul National University, San56-1, Sillim-Dong, Kwanak-Gu, Seoul 151-742 (Korea, Republic of)

    2012-10-15

    We discuss the design and analysis of a small scale sulfuric acid experimental system that can simulate a part of the hydrogen production module. Because nuclear hydrogen coupled components such as a SO{sub 3} decomposer and a sulfuric acid evaporator should be tested under high pressure and high temperature operating conditions, we developed the sulfuric acid loop to satisfy design specifications of 900 Degree-Sign C in temperature and 1.0 MPa in pressure. The components for the sulfuric acid loop were specially designed using a combination of materials with good corrosion resistance; a ceramic and Hastelloy-C276. The design feature of the loop was tested for performance in a 10 h sulfuric acid experiment and optimized using Aspen+ code simulation.

  12. High Pressure - High Temperature Polymorphism in Ta: Resolving an Ongoing Experimental Controversy

    Energy Technology Data Exchange (ETDEWEB)

    Burkovsky, L; Chen, S P; Preston, D L; Belonoshko, A B; Rosengren, A; Mikhaylushkin, A S; Simak, S I; Moriarty, J A

    2010-04-07

    Phase diagrams of refractory metals remain essentially unknown. Moreover, there is an ongoing controversy over the high pressure (P) melting temperatures of these metals: results of diamond anvil cell (DAC) and shock wave experiments differ by at least a factor of two. From an extensive ab initio study on tantalum we discovered that the body-centered cubic phase, its physical phase at ambient conditions, transforms to another solid phase, possibly hexagonal omega phase, at high temperature (T). Hence the sample motion observed in DAC experiments is not due to melting but internal stresses accompanying a solid-solid transformation, as explained in more detail in our work. In view of our results on tantalum and previous work on molybdenum, as well as other published data, it is highly plausible that high-PT polymorphism is a general feature of Groups V and VI refractory metals.

  13. High-pressure and high-temperature studies on oxide garnets

    Science.gov (United States)

    Hua, Hong; Mirov, Sergey; Vohra, Yogesh K.

    1996-09-01

    We report high-pressure and high-temperature studies on a series of oxide garnets of chemical composition A3B2C3O12. The members of this family investigated are gadolinium scandium gallium garnet (GSGG), gadolinium gallium garnet (GGG), and yttrium aluminum garnet (YAG). The GSGG and GGG are doped with both neodymium and chromium while the YAG is doped only with neodymium. Photoluminescence, synchrotron x-ray-diffraction, and laser heating studies were carried out in a diamond-anvil cell. Variety of optical sensors (ruby, Sm-doped YAG) and x-ray pressure marker (copper) were employed for pressure measurement. Pressure-induced amorphization was observed in GSGG at 58+/-3 GPa and GGG at 84+/-4 GPa by x-ray-diffraction studies. The photoluminescence studies show only gradual broadening of emission bands through the amorphization transition. On increasing pressure beyond amorphization, very broad and featureless emission bands were observed in the fluorescence spectra at 77+/-2 GPa for GSGG and at 88+/-2 GPa for GGG. Laser heating of the pressure-induced amorphous phase in GSGG caused recrystallization to the stable cubic phase. High-pressure x-ray study on YAG shows that it retains cubic phase up to 101+/-4 GPa. A pressure-volume relation for each member of the oxide garnet at ambient temperatures is presented, structural transformation mechanisms, and application of oxide garnets as pressure sensors are also discussed.

  14. An Automated Laboratory Laser Heating Arrangement for Materials Synthesis at High Temperatures and High Pressures

    CERN Document Server

    Subramanian, N; Bindu, R; Kumar, N R Sanjay; Sekar, M; Shekar, N V Chandra; Sahu, P Ch

    2008-01-01

    This paper describes the automation of a laser heating arrangement for synthesizing and studying materials at high pressures (up to ~ 1 Mbar) and high temperatures (up to ~ 5000 K). In this arrangement, a diamond anvil high-pressure cell (DAC) containing a microscopic sample of typical diameter ~50-100 micrometer, is mounted on a precision X-Y nanomotor stage that forms part of an IR laser heating optical assembly. Automation of this stage has been accomplished using a LabVIEW virtual instrument program to manipulate the X and Y stages using nanopositioning systems. This has a major feature of enabling a rastered heating of the sample over a user-defined circular area, without any operator intervention in addition to a virtual joystick to position the sample with respect to the laser spot. This auto-rastering feature has the advantage of offering uniform exposure of a circular area of the sample to the incident heating laser beam apart from drastic reduction in scan time compared to a manual scan. The diamete...

  15. High pressure-high temperature polymorphism and decomposition of pentaerythritol tetranitrate (PETN).

    Science.gov (United States)

    Dreger, Zbigniew A; Gupta, Yogendra M

    2013-06-27

    To elucidate the behavior of PETN at thermo-mechanical conditions relevant for shock initiation, Raman spectroscopy, and optical imaging were used to examine its static high pressure and high temperature (HP-HT) response. Experiments were performed on single crystals in a heated diamond anvil cell at pressures to 14 GPa and temperatures ranging from room temperatures to 550 K. Regarding the pressure-induced PETN-I transition to PETN-III at room temperature, our results show that nonhydrostaticity plays an important role in driving this transition. Furthermore, we found that PETN-III transforms to PETN-IV at high temperatures, and this transformation can involve lowering of molecular symmetry from C2 to C1. The HP-HT phase diagram for PETN presented here includes the melting/decomposition curve and boundaries between three PETN phases: PETN-I, PETN-III, and PETN-IV. The relevance of static compression results for shock initiation of PETN is discussed.

  16. A novel high-temperature and high-pressure hydraulic pump based on mononeuron control

    Institute of Scientific and Technical Information of China (English)

    Linhui ZHAO; Xin FANG

    2009-01-01

    Based on structures and characteristics of traditional hydraulic pumps, this paper proposes a novel high-temperature and high-pressure hydraulic pump (HHHP) that can work under 150℃ and 28MPa to overcome problems of traditional high-temperature plun-ger pumps. The HHHP is designed with the structure of mechanical division and double cylinder parallel. The control signals of two cylinders are two separate triangle waveforms with 90℃ phase difference. Because the output waveforms of two cylinders have the same characteristics as the control signals, the HHHP can obtain a stable output after two separate waveforms are superposed. A mono-neuron self-adaptive PID control algorithm is also improved by modifying parameters K and η. Two improved controllers are used to control the two cylinders,respectively, making two displacements of plungers match each other. Therefore, reduced fluctuations and stable pressure output is obtained. Besides simulation, tests on the built prototype test system are carried out to verify the performance of HHHP. Results show that the improved control approach can limit fluctuations to a lower level and the HHHP system attains good outputs under different signal periods and different pressures.

  17. Matrix free fiber reinforced polymeric composites via high-temperature high-pressure sintering

    Science.gov (United States)

    Xu, Tao

    2004-11-01

    A novel manufacturing process called high-temperature high-pressure sintering was studied and explored. Solid fiber reinforced composites are produced by consolidating and compacting layers of polymeric fabrics near their melting temperature under high pressure. There is no need to use an additional matrix as a bonding material. Partial melting and recrystallization of the fibers effectively fuse the material together. The product is called a "matrix free" fiber reinforced composite and essentially a one-polymer composite in which the fiber and the matrix have the same chemical composition. Since the matrix is eliminated in the process, it is possible to achieve a high fiber volume fraction and light weight composite. Interfacial adhesion between fibers and matrix is very good due to the molecular continuity throughout the system and the material is thermally shapeable. Plain woven Spectra RTM cloth made of SpectraRTM fiber was used to comprehensively study the process. The intrinsic properties of the material demonstrate that matrix free SpectraRTM fiber reinforced composites have the potential to make ballistic shields such as body armor and helmets. The properties and structure of the original fiber and the cloth were carefully examined. Optimization of the processing conditions started with the probing of sintering temperatures by Differential Scanning Calorimetry. Coupled with the information from structural, morphological and mechanical investigations on the samples sintered at different processing conditions, the optimal processing windows were determined to ensure that the outstanding original properties of the fibers translate into high ballistic performance of the composites. Matrix free SpectraRTM composites exhibit excellent ballistic resistance in the V50 tests conducted by the US Army. In the research, process-structure-property relationship is established and correlations between various properties and structures are understood. Thorough knowledge is

  18. Neoarchean arc magmatism followed by high-temperature, high-pressure metamorphism in the Nilgiri Block, southern India

    Science.gov (United States)

    Samuel, Vinod O.; Sajeev, K.; Hokada, T.; Horie, K.; Itaya, T.

    2015-11-01

    The Nilgiri Block, southern India is an exhumed lower crust formed through arc magmatic processes in the Neoarchean. The main lithologies in this terrane include charnockites, gneisses, volcanic tuff, metasediments, banded iron formation and mafic-ultramafic bodies. Mafic-ultramafic rocks are present towards the northern and central part of the Nilgiri Block. We examine the evolution of these mafic granulites/metagabbros by phase diagram modeling and U-Pb sensitive high resolution ion microprobe (SHRIMP) dating. They consist of a garnet-clinopyroxene-plagioclase-hornblende-ilmenite ± orthopyroxene ± rutile assemblage. Garnet and clinopyroxene form major constituents with labradorite and orthopyroxene as the main mineral inclusions. Labradorite, identified using Raman analysis, shows typical peaks at 508 cm- 1, 479 cm- 1, 287 cm- 1 and 177 cm- 1. It is stable along with orthopyroxene towards the low-pressure high-temperature region of the granulite facies (M1 stage). Subsequently, orthopyroxene reacted with plagioclase to form the peak garnet + clinopyroxene + rutile assemblage (M2 stage). The final stage is represented by amphibolite facies-hornblende and plagioclase-rim around the garnet-clinopyroxene assemblage (M3 stage). Phase diagram modeling shows that these mafic granulites followed an anticlockwise P-T-t path during their evolution. The initial high-temperature metamorphism (M1 stage) was at 850-900 °C and ~ 9 kbar followed by high-pressure granulite facies metamorphism (M2 stage) at 850-900 °C and 14-15 kbar. U-Pb isotope studies of zircons using SHRIMP revealed late Neoarchean to early paleoproterozoic ages of crystallization and metamorphism respectively. The age data shows that these mafic granulites have undergone arc magmatism at ca. 2539.2 ± 3 Ma and high-temperature, high-pressure metamorphism at ca. 2458.9 ± 8.6 Ma. Thus our results suggests a late Neoarchean arc magmatism followed by early paleoproterozoic high-temperature, high-pressure

  19. Effects of catalyst height on diamond crystal morphology under high pressure and high temperature

    Science.gov (United States)

    Ya-Dong, Li; Xiao-Peng, Jia; Bing-Min, Yan; Ning, Chen; Chao, Fang; Yong, Li; Hong-An, Ma

    2016-04-01

    The effect of the catalyst height on the morphology of diamond crystal is investigated by means of temperature gradient growth (TGG) under high pressure and high temperature (HPHT) conditions with using a Ni-based catalyst in this article. The experimental results show that the morphology of diamond changes from an octahedral shape to a cub-octahedral shape as the catalyst height rises. Moreover, the finite element method (FEM) is used to simulate the temperature field of the melted catalyst/solvent. The results show that the temperature at the location of the seed diamond continues to decrease with the increase of catalyst height, which is conducive to changing the morphology of diamond. This work provides a new way to change the diamond crystal morphology. Project supported by the National Natural Science Foundation of China (Grant No. 51172089), the Program for New Century Excellent Talents in University, the Natural Science Foundation of Guizhou Provincial Education Department (Grant No. KY[2013]183), and the Collaborative Fund of Science and Technology Office of Guizhou Province, China (Grant No. LH[2015]7232).

  20. A new and reliable model for predicting methane viscosity at high pressures and high temperatures

    Institute of Scientific and Technical Information of China (English)

    Ehsan Heidaryan; Jamshid Moghadasi; Amir Salarabadi

    2010-01-01

    In recent years,there has been an increase of interest in the flow of gases at relatively high pressures and high temperatures.Hydrodynamic calculation of the energy losses in the flow of gases in conduits,as well as through the porous media constituting natural petroleum reservoirs,requires knowledge of the viscosity of the fluid at the pressure and temperature involved.Although there are numerous publications concerning the viscosity of methane at atmospheric pressure,there appears to be little information available relating to the effect of pressure and temperature upon the viscosity.A survey of the literature reveals that the disagreements between published data on the viscosity of methane are common and that most investigations have been conducted over restricted temperature and pressure ranges.Experimental viscosity data for methane are presented for temperatures from 320 to 400 K and pressures from 3000 to 140000 kPa by using falling body viscometer.A summary is given to evaluate the available data for methane,and a comparison is presented for that data common to the experimental range reported in this paper.A new and reliable correlation for methane gas viscosity is presented.Predicted values are given for temperatures up to 400 K and pressures up to 140000 kPa with Average Absolute Percent Relative Error(EABS)of 0.794.

  1. A perovskitic lower mantle inferred from high-pressure, high-temperature sound velocity data.

    Science.gov (United States)

    Murakami, Motohiko; Ohishi, Yasuo; Hirao, Naohisa; Hirose, Kei

    2012-05-02

    The determination of the chemical composition of Earth's lower mantle is a long-standing challenge in earth science. Accurate knowledge of sound velocities in the lower-mantle minerals under relevant high-pressure, high-temperature conditions is essential in constraining the mineralogy and chemical composition using seismological observations, but previous acoustic measurements were limited to a range of low pressures and temperatures. Here we determine the shear-wave velocities for silicate perovskite and ferropericlase under the pressure and temperature conditions of the deep lower mantle using Brillouin scattering spectroscopy. The mineralogical model that provides the best fit to a global seismic velocity profile indicates that perovskite constitutes more than 93 per cent by volume of the lower mantle, which is a much higher proportion than that predicted by the conventional peridotitic mantle model. It suggests that the lower mantle is enriched in silicon relative to the upper mantle, which is consistent with the chondritic Earth model. Such chemical stratification implies layered-mantle convection with limited mass transport between the upper and the lower mantle.

  2. A Study of Diamond Growth Instability t High Temperature-High Pressure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    In this paper, crystal growth instability of diamond was studied in a Fe-Ni-C system at high temperature-high pressure (HPHT). As any other crystal grown from solution, the flat or smooth growth interface of the diamond crystal is highly sensitive to growth conditions. The growth front interface should be of great importance to understand the diamond growth process. The presence of cellular growth interface by transmission electron microscopy indicated that there existed a narrow constitutional supercooling zone in front of the growth interface. Several parallel layers with cellular interface by TEM directly suggested that the diamond grows from the solution of carbon in the molten catalyst layer by layer, which is in accordance with the result obtained by scanning electron microscopy in this paper.Impurities are trapped by rapidly advancing growth layers during the diamond growth and they impose a great effect on the growth front stability. As the growth front interface approaches the impurity particle to a distance of about 10-5~10-7 cm, appreciable molecular forces begin to operate between them, and the impurity particle is trapped as the growth rate reaches a critical value. As a result, the driving force for crystallization under the impurity particles becomes smaller, the front buckles under the particle. An impurity naturally reduces the growth rate to a different extent.

  3. Survey of industrial coal conversion equipment capabilities: high-temperature, high-pressure gas purification

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J. P.; Edwards, M. S.

    1978-06-01

    In order to ensure optimum operating efficiencies for combined-cycle electric generating systems, it is necessary to provide gas treatment equipment capable of operating at high temperatures (>1000/sup 0/F) and high pressure (>10 atmospheres absolute). This equipment, when assembled in a process train, will be required to condition the inlet stream to a gas turbine to suitable levels of gas purity (removal of particulate matter, sulfur, nitrogen, and alkali metal compounds) so that it will be compatible with both environmental and machine constraints. In this work, a survey of the available and developmental equipment for the removal of particulate matter and sulfur compounds has been conducted. In addition, an analysis has been performed to evaluate the performance of a number of alternative process configurations in light of overall system needs. Results from this study indicate that commercially available, reliable, and economically competitive hot-gas cleanup equipment capable of conditioning raw product gas to the levels required for high-temperatue turbine operation will not be available for some time.

  4. Survey of processes for high temperature-high pressure gas purification. [52 references

    Energy Technology Data Exchange (ETDEWEB)

    Meyer, J.P.; Edwards, M.S.

    1978-11-01

    In order to ensure the optimum operating efficiency of a combined-cycle electric power generating system, it is necessary to provide gas treatment processes capable of operating at high temperatures (> 1000/sup 0/F) and high pressures (> 10 atm (absolute)). These systems will be required to condition the inlet stream to the gas turbine to suitable levels of gas purity (removal of particulate matter, sulfur, nitrogen, and alkali metal compounds) to be compatible with both environmental and machine constraints. A survey of the available and developmental processes for the removal of these various contaminant materials has been conducted. Based on the data obtained from a variety of sources, an analysis has been performed to evaluate the performance of a number of potential cleanup processes in view of the overall system needs. The results indicate that commercially available, reliable, and economically competitive hot-gas cleanup systems (for the removal of H/sub 2/S, particulate matter, alkali, and nitrogen compounds) capable of conditioning raw product gas to the levels required for turbine use will not be available for some time.

  5. Boron-doped diamond synthesized at high-pressure and high-temperature with metal catalyst

    Science.gov (United States)

    Shakhov, Fedor M.; Abyzov, Andrey M.; Kidalov, Sergey V.; Krasilin, Andrei A.; Lähderanta, Erkki; Lebedev, Vasiliy T.; Shamshur, Dmitriy V.; Takai, Kazuyuki

    2017-04-01

    The boron-doped diamond (BDD) powder consisting of 40-100 μm particles was synthesized at 5 GPa and 1500-1600 °C from a mixture of 50 wt% graphite and 50 wt% Ni-Mn catalyst with an addition of 1 wt% or 5 wt% boron powder. The size of crystal domains of doped and non-doped diamond was evaluated as a coherent scattering region by X-ray diffraction (XRD) and using small-angle neutron scattering (SANS), being ≥180 nm (XRD) and 100 nm (SANS). Magnetic impurities of NiMnx originating from the catalyst in the synthesis, which prevent superconductivity, were detected by magnetization measurements at 2-300 K. X-ray photoelectron spectroscopy, the temperature dependence of the resistivity, XRD, and Raman spectroscopy reveal that the concentration of electrically active boron is as high as (2±1)×1020 cm-3 (0.1 at%). To the best of our knowledge, this is the highest boron content for BDD synthesized in high-pressure high-temperature process with metal catalysts.

  6. An Innovative High-Temperature High-Pressure Measurement While Drilling (MWD) Tool

    Energy Technology Data Exchange (ETDEWEB)

    Brian Boling

    2007-06-01

    Measurement while drilling (MWD) tools specified to 150 C (302 F) that provide wellbore surveys, real-time inclination, and natural gamma ray detection are a commodity item in the oilfield services industry. MWD tools specified to 175 C (347 F) that routinely demonstrate highly reliable operation are available from only a few service companies. Commercial MWD tools that reliably operate to 200 C (392 F) for extended periods of time and offer features like real-time gamma ray, retrievability, and reseatability are nonexistent. Need for these higher temperature tools will increase as wells become hotter in the search for new oil and gas resources. The goal of this project was to design a retrievable and reseatable high-pressure/high-temperature MWD tool with real-time continuous inclination, vibration detection, annular pressure, and gamma ray detection. This report describes the development of such a tool from concept, through feasibility, and into field testing and preliminary development planning. It describes the challenges encountered in the design of the tool, along with testing results and decisions about the commercial viability of the tool in the configuration in which it was developed. The decision was made not to commercialize the tool developed under this project because of a combination of battery technology problems and modulation power consumption at the required depths.

  7. High-pressure, high-temperature magic angle spinning nuclear magnetic resonance devices and processes for making and using same

    Science.gov (United States)

    Hu, Jian Zhi; Hu, Mary Y.; Townsend, Mark R.; Lercher, Johannes A.; Peden, Charles H. F.

    2015-10-06

    Re-usable ceramic magic angle spinning (MAS) NMR rotors constructed of high-mechanic strength ceramics are detailed that include a sample compartment that maintains high pressures up to at least about 200 atmospheres (atm) and high temperatures up to about least about 300.degree. C. during operation. The rotor designs minimize pressure losses stemming from penetration over an extended period of time. The present invention makes possible a variety of in-situ high pressure, high temperature MAS NMR experiments not previously achieved in the prior art.

  8. High-pressure, high-temperature magic angle spinning nuclear magnetic resonance devices and processes for making and using same

    Energy Technology Data Exchange (ETDEWEB)

    Hu, Jian Zhi; Hu, Mary Y.; Townsend, Mark R.; Lercher, Johannes A.; Peden, Charles H. F.

    2015-10-06

    Re-usable ceramic magic angle spinning (MAS) NMR rotors constructed of high-mechanic strength ceramics are detailed that include a sample compartment that maintains high pressures up to at least about 200 atmospheres (atm) and high temperatures up to about least about 300.degree. C. during operation. The rotor designs minimize pressure losses stemming from penetration over an extended period of time. The present invention makes possible a variety of in-situ high pressure, high temperature MAS NMR experiments not previously achieved in the prior art.

  9. Energy-Based Tetrahedron Sensor for High-Temperature, High-Pressure Environments

    Science.gov (United States)

    Gee, Kent L.; Sommerfeldt, Scott D.; Blotter, Jonathan D.

    2012-01-01

    An acoustic energy-based probe has been developed that incorporates multiple acoustic sensing elements in order to obtain the acoustic pressure and three-dimensional acoustic particle velocity. With these quantities, the user can obtain various energy-based quantities, including acoustic energy density, acoustic intensity, and acoustic impedance. In this specific development, the probe has been designed to operate in an environment characterized by high temperatures and high pressures as is found in the close vicinity of rocket plumes. Given these capabilities, the probe is designed to be used to investigate the acoustic conditions within the plume of a rocket engine or jet engine to facilitate greater understanding of the noise generation mechanisms in those plumes. The probe features sensors mounted inside a solid sphere. The associated electronics for the probe are contained within the sphere and the associated handle for the probe. More importantly, the design of the probe has desirable properties that reduce the bias errors associated with determining the acoustic pressure and velocity using finite sum and difference techniques. The diameter of the probe dictates the lower and upper operating frequencies for the probe, where accurate measurements can be acquired. The current probe design implements a sphere diameter of 1 in. (2.5 cm), which limits the upper operating frequency to about 4.5 kHz. The sensors are operational up to much higher frequencies, and could be used to acquire pressure data at higher frequencies, but the energy-based measurements are limited to that upper frequency. Larger or smaller spherical probes could be designed to go to lower or higher frequency range

  10. Experimental studies on elastic and rheological properties of amphibolites at high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    HUANG; Xiaoge(黄晓葛); BAI; Wuming(白武明); HU; Jianmin(胡健民)

    2003-01-01

    Laboratory measurements of compressional-wave velocities and rheological properties are carried out on natural amphibolites collected from Chencai, Zhejiang Province at high pressures and high temperatures. The experiments of elastic wave velocity find that the compressional-wave velocities travel faster along the lineation(X-direction) within the foliation plane than those normal to the foliation (Z-direction). The velocity anisotropies are high for the amphibolites at 550℃ and pressure of 800 MPa or 600 MPa. Furthermore, the values of anisotropy and average velocity are respectively 7.83% and 6.77km/s for the samples with fine grain size, 9.77% and 6.64km/s for the samples with medium grain size. With increasing temperature at high static pressure, the wave velocities spreading along three structure directions in the samples all start to drop from 750℃ up. The rheological experiments also find that there is a marked strength reduction from 750℃ to 800℃ although the flow strength gradually decreases with increasing temperature for the fine-grained amphibolite at a confining pressure of 500 MPa and strain rate of 1×10-4s-1. Based on the results of microcopy observations, electronic probe analyses and infrared spectra analyses for some samples, the reduction of flow strength and wave velocity may be due to partial melting of amphibole above 750℃. In addition, the rock deformations undergo from localized brittle fracture, semi-brittle deformation (cataclastic flow or semi-brittle faulting, semi-brittle flow) to homogeneous crystal-plastic flow from 600℃ to 1000℃, confining pressure of 500 MPa and strain rate of 1×10-4s-1.

  11. Development of a High Pressure/High Temperature Down-hole Turbine Generator

    Energy Technology Data Exchange (ETDEWEB)

    Ben Plamp

    2008-06-30

    As oil & natural gas deposits become more difficult to obtain by conventional means, wells must extend to deeper more heat-intensive environments. The technology of the drilling equipment required to reach these depths has exceeded the availability of electrical power sources needed to operate these tools. Historically, logging while drilling (LWD) and measure while drilling (MWD) devices utilized a wireline to supply power and communication from the operator to the tool. Lithium ion batteries were used in scenarios where a wireline was not an option, as it complicated operations. In current downhole applications, lithium ion battery (LIB) packs are the primary source for electrical power. LIB technology has been proven to supply reliable downhole power at temperatures up to 175 °C. Many of the deeper well s reach ambient temperatures above 200 °C, creating an environment too harsh for current LIB technology. Other downfalls of LIB technology are cost, limitations on charge cycles, disposal issues and possible safety hazards including explosions and fires. Downhole power generation can also be achieved by utilizing drilling fluid flow and converting it to rotational motion. This rotational motion can be harnessed to spin magnets around a series of windings to produce power proportional to the rpm experienced by the driven assembly. These generators are, in most instances, driven by turbine blades or moyno-based drilling fluid pumps. To date, no commercially available downhole power generators are capable of operating at ambient temperatures of 250 °C. A downhole power g enerator capable of operation in a 250 °C and 20,000 psi ambient environment will be an absolute necessity in the future. Dexter Magnetic Technologies’ High-Pressure High-Temperature (HPHT) Downhole Turbine Generator is capable of operating at 250 °C and 20, 000 psi, but has not been tested in an actual drilling application. The technology exists, but to date no company has been willing to

  12. Development of Designer Diamond Technology for High Pressure High Temperature Experiments in Support of Stockpile Stewardship Program

    Energy Technology Data Exchange (ETDEWEB)

    Vohra, Yogesh, K.

    2009-10-28

    The role of nitrogen in the fabrication of designer diamond was systematically investigated by adding controlled amount of nitrogen in hydrogen/methane/oxygen plasma. This has led to a successful recipe for reproducible fabrication of designer diamond anvils for high-pressure high-temperature research in support of stockpile stewardship program. In the three-year support period, several designer diamonds fabricated with this new growth chemistry were utilized in high-pressure experiments at UAB and Lawrence Livermore National Laboratory. The designer diamond anvils were utilized in high-pressure studies on heavy rare earth metals, high pressure melting studies on metals, and electrical resistance measurements on iron-based layered superconductors under high pressures. The growth chemistry developed under NNSA support can be adapted for commercial production of designer diamonds.

  13. Synthesis of Dense BC3 Phases under High-Pressure and High-Temperature

    Science.gov (United States)

    Zinin, P.; Ming, L.; Acosta, T.; Jia, R.; Hellebrand, E.; Ishii, H.

    2010-12-01

    The finding of the new diamond-like B-C phases is of fundamental importance. These phases are potential high-temperature superconductors and their development is important for understanding the nature of high-temperature superconductivity (Moussa, Cohen, Phys. Rev. B, 77, 064518 2008). They will shed light on the nature of the bonding of the boron atoms in a diamond-like structure. Recently, theoretical simulations of pressure- and temperature-induced phase transition in the B-C system demonstrated that the incorporation of B atoms into a diamond structure should not lead to a drastic distortion of the cubic cell of a diamond (Lowther, J. Phys. Condense Matter. 17, 3221, 2005). In this report we present data on the synthesis of new dense phases cubic BC3 (c-BC3) phase from graphitic BC3 phase (g-BC3) phase under high pressure and high temperature. Two graphitic polycrystalline BCx samples were compressed in a diamond-anvil cell to about 24 GPa and 45 GPa, respectively, and then were laser-heated to ~2000 K. After quenching, each sample was decompressed gradually stepwise to the atmospheric pressure. Synchrotron-based X-ray diffraction patterns were taken before and after the laser-heating, and also at each pressure step-down. The experimental data showed that two new phases were synthesized: (a) an orthorhombic phase with a0 = 3.74 Å, b0 = 3.24 Å, c0=4.25 Å; and (b) a cubic phase with a0 = 3.587Å recovered from 24 GPa and 44 GPa, respectively. The zero-pressure lattice parameter of the cubic phase obtained in this study is larger than that of diamond (i.e., a0=3.5667 Å, ASTM # 6-0675), which is consistent with theoretical prediction The micro-Raman measurements were directly performed on the new phases. The Raman spectra excited by a green (Nd-YAG, 532-nm) laser were taken with a confocal Raman system (WiTec alpha300). The Raman spectrum of the c-BC3 phase is similar to that of diamond-like BC3 phase (Zinin et al., J. Raman Spectrosc., 38, 1362, 2007) with a

  14. Modeling of high temperature- and diffusion-controlled die soldering in aluminum high pressure die casting

    DEFF Research Database (Denmark)

    Domkin, Konstantin; Hattel, Jesper Henri; Thorborg, Jesper

    2009-01-01

    Soldering of cast alloys to the dies has been a continuing source of die surface damage in the aluminum die-casting industry. To reduce the repair and maintenance costs, an approach to modeling the damage and predicting the die lifetime is required. The aim of the present study is the estimation...... of the die lifetime based on a quantitative analysis of die soldering in the framework of the numerical simulations of the die-casting process. Full 3D simulations of the process, including the filling. solidification, and the die cooling, are carried out using the casting simulation software MAGMAsoft....... The resulting transient temperature fields on the die surface and in the casting are then post-processed to estimate the die soldering. The present work deals only with the metallurgical/chemical kind of soldering which occurs at high temperatures and involves formation and growth of intermetallic layers...

  15. Growth of diamond layers on diamond and cBN seeds using iron carbide under high pressure and high temperature

    CERN Document Server

    Li Xun; Hao Zhao Yin; LiuPeng; Li Musen; Zou Guang Tian; Cheng Shu Yu; Cheng Kai Jia

    2002-01-01

    Iron carbide without any graphite was studied under high pressure and high temperature (HPHT); diamond layers were obtained both on diamond and on cubic boron nitride seeds at 5.5 GPa and 1700-1750 K. The results showed that transition-metal carbide was the main intermediate in the course of the transformation from graphite to diamond under HPHT.

  16. Frictional Behavior of Anorthite and Quartz at High Pressure and High Temperature Conditions

    Science.gov (United States)

    Arai, T.; Masuda, K.; Fujimoto, K.; Shigematsu, N.; Ohtani, T.; Sumii, T.; Okuyama, Y.

    2002-12-01

    Most of earthquakes in the crust occurred at the depth of 5 to 20km, and the distribution of mainshocks matches the base of this zone, where is considered to be consistent with brittle-ductile transition zone. The lower boundary on seismicity results from a switch from velocity weakening to velocity strengthening of friction with increasing temperature. The physical properties of rocks associated with elevated temperatures were determined by many frictional experiments. In these experimental studies, quartz, which controls the rock strength at brittle-ductile transition zone, was generally used. On the other hand, frictional experiment with feldspar is very few in spite of dominant phase in the crust, because feldspar behaves in a brittle manner at greenshist facies. However, recent studies indicate fine-grained plagioclase (1um) contributed deformation process largely at the Hatagawa fault zone, northeast Japan, where is considered to have been brittle-ductile transition zone in the past. In order to understand the source processes of earthquakes, it is important to evaluate the physical properties of fine grained plagioclace as well as those of quartz. In this study, we conducted frictional experiments by using anorthite and quartz gouges under high pressure and high temperature in a triaxial apparatus, and compared frictional behaviors of two minerals with elevated temperature. Temperature varied from room temperature to 800°C. Fine- (1-10um,1um) and coarse-grained (50um, 100um) samples were prepared to evaluate the effect of different grain size as observed Hatagawa fault zone. The samples were put between upper and lower sawcut cylinders (20mm diameter x 40mm long). The sawcut was oriented at 30° to the loading axis. These were jacketed with thin sleeves of annealed Cu. Pore fluids accelerated deformation process of Hatagawa mylonite at higher temperature than 600°C under the same effective confining pressure (Masuda et al., presented in this meeting

  17. Experimental study of forced convection heat transfer during upward and downward flow of helium at high pressure and high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Francisco Valentin; Narbeh Artoun; Masahiro Kawaji; Donald M. McEligot

    2015-08-01

    Fundamental high pressure/high temperature forced convection experiments have been conducted in support of the development of a Very High Temperature Reactor (VHTR) with a prismatic core. The experiments utilize a high temperature/high pressure gas flow test facility constructed for forced convection and natural circulation experiments. The test section has a single 16.8 mm ID flow channel in a 2.7 m long, 108 mm OD graphite column with four 2.3kW electric heater rods placed symmetrically around the flow channel. This experimental study presents the role of buoyancy forces in enhancing or reducing convection heat transfer for helium at high pressures up to 70 bar and high temperatures up to 873 degrees K. Wall temperatures have been compared among 10 cases covering the inlet Re numbers ranging from 500 to 3,000. Downward flows display higher and lower wall temperatures in the upstream and downstream regions, respectively, than the upward flow cases due to the influence of buoyancy forces. In the entrance region, convection heat transfer is reduced due to buoyancy leading to higher wall temperatures, while in the downstream region, buoyancyinduced mixing causes higher convection heat transfer and lower wall temperatures. However, their influences are reduced as the Reynolds number increases. This experimental study is of specific interest to VHTR design and validation of safety analysis codes.

  18. Fabrication of high thermal conductive Al-cBN ceramic sinters by high temperature high pressure method

    Science.gov (United States)

    Wang, P. F.; Li, Zh. H.; Zhu, Y. M.

    2011-05-01

    Al-cBN ceramic sinters were fabricated by sintering micro-powder mixture of Al and cBN under high temperature and high pressure condition. Differential scanning calorimetry (DSC), X-ray diffraction (XRD), scanning electronic microscopy (SEM) and energy-dispersive X-ray spectroscopy (EDS) elemental mapping analyses and laser flashing thermal conductivity measurements were performed to investigate the sintering properties and thermal conductivity of the Al-cBN ceramic sinters. XRD analysis revealed these Al-cBN ceramic sinters were composed of a large portion of cBN and of a small portion of AlN, and very little amount of AlB 12 and hBN. Formation of boundary phase resulted in the rapid densification of the sinters, as well as the increase of their relative density with increasing Al additions. The Al-cBN ceramic sinters have a maximum thermal conductivity of about 1.94 W/cm K at room temperature and a much higher value of about 2.04 W/cm K at 200 °C. Their high thermal conductivity over that of AlN-hBN composites promise Al-cBN ceramic sinters favorite candidates as high efficiency heat sink materials for wide band gap semiconductors.

  19. In situ X-ray observation of phase transitions in ZnF2 under high pressure and high temperature

    Science.gov (United States)

    Kusaba, Keiji; Kikegawa, Takumi

    2008-02-01

    High-pressure and high-temperature behavior of ZnF 2 with the rutile-type structure was investigated using an energy-dispersive-type X-ray diffraction method. Two high-pressure phases were found in the range up to 15 GPa and 400 ∘C. The CaCl 2-type phase with an orthorhombic cell (space group: Pnnm) was clearly observed at 5.4 GPa and 400 ∘C. Further phase transition was induced above 10 GPa at room temperature. The single phase of the high-pressure phase was obtained at 15.3 GPa and 350 ∘C. The high-pressure phase was found to have the PdF 2-type structure with a cubic cell (space group: Pa-3). The single phase was observed above 4 GPa in a pressure-release process at room temperature, and completely reverted to a mixture of the rutile-type phase and the α- PbO 2-type phase at ambient condition. The high-pressure behavior of ZnF 2 was similar to that of MgF 2.

  20. Anharmonic effective pair potentials of gold under high pressure and high temperature

    CERN Document Server

    Okube, M; Ohtaka, O; Fukui, H; Katayama, Y; Utsumi, W

    2002-01-01

    In order to examine the effect of pressure on the anharmonicity of Au, extended x-ray absorption fine-structure spectra near the Au L sub 3 edge were measured in the temperature range from 300 to 1100 K under pressures up to 14 GPa using large-volume high-pressure devices and synchrotron radiation. The anharmonic effective pair potentials of Au, V (u) = au sup 2 + bu sup 3 , at 0.1 MPa, 6 and 14 GPa have been calculated. The pressure dependence of the thermal expansion coefficients has also been evaluated. The reliability of the anharmonic correction proposed on the basis of the Anderson scale has been discussed.

  1. Crystallization in Earth's Core after High-Temperature Core Formation

    Science.gov (United States)

    Hirose, K.; Morard, G.; Hernlund, J. W.; Helffrich, G. R.; Ozawa, H.

    2015-12-01

    Recent core formation models based on the metal-silicate partitioning of siderophile elements suggest that the Earth's core was formed by metal segregation at high pressure and high temperature in a deep magma ocean. It is also thought that the simultaneous solubility of silicon and oxygen in liquid iron are strongly enhanced at high pressure and high temperature, such that at the end of accretion the core was rich in both silicon and oxygen. Here we performed crystallization experiments on the Fe-Si binary and Fe-Si-O ternary systems up to core pressure in a laser-heated diamond-anvil cell. The starting material for the latter was a homogeneous mixture of fine-grain Fe-Si and SiO2 (sustain without extreme degrees of secular cooling. However, even for modest degrees of joint Si-O incorporation into the early core, the buoyancy released by crystallization of SiO2 is sufficient to overcome thermal stratification and sustain the geodynamo.

  2. Experimental study on liquid immiscibility of lamprophyre-sulfide melt at high temperature and high pressure and its geological significance

    Institute of Scientific and Technical Information of China (English)

    LI Bo; HUANG Zhilong; ZHU Chengming

    2009-01-01

    With lamprophyre and pyrite from the Laowangzhai gold deposit, Yunnan Province, China, as starting materials, and at pressures from 1.5 to 3.0 GPa and temperatures from 1160 to 1560℃, an experimental study was carried out on the liquid immiscibility of lamprophyre-sulfide melt at high temperature and ultra-high pressure in the DS-29A cubic 3600T/6-type high pressure apparatus. Results showed that the liquid immiscibility of lampropyre-sulfide melt in the magmatic system would happen during the early magmatic evolution (high temperature and high pressure conditions) and was controlled by temperature and pressure. The sulfide melt which was separated from the lamprophyric melt would make directional movement in the temperature and pressure field and assemble in the low-temperature and low-pressure region. Because the density of SM is higher than that of the lamprophyric melt, the former would gather together at the bottom of the magma chamber and there would exist a striking boundary between the two melts. On the other hand, the results also suggested that there would be little possibility for lamprophyric magma to carry massive gold, and lamprophyres can't provide many of ore-forming materials (Au) in the processes of gold mineralization.

  3. GFOC Project results: High Temperature / High Pressure, Hydrogen Tolerant Optical Fiber

    Energy Technology Data Exchange (ETDEWEB)

    E. Burov; A. Pastouret; E. Aldea; B. Overton; F. Gooijer; A. Bergonzo

    2012-02-12

    Tests results are given for exposure of multimode optical fiber to high temperatures (300 deg. C) and high partial pressure (15 bar) hydrogen. These results demonstrate that fluorine down doped optical fibers are much more hydrogen tolerant than traditional germanium doped multimode optical fibers. Also demonstrated is the similar hydrogen tolerance of carbon coated and non-carbon coated fibers. Model for reversible H2 impact in fiber versus T{sup o}C and H2 pressure is given. These results have significant impact for the longevity of use for distributed temperature sensing applications in harsh environments such as geothermal wells.

  4. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0-2.0 Gpa and 320-700℃,and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alter-native current.Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane ,and the mechanism is dominated at high pressure.These arcs occur over the range of 102-k×105Hz(k is the positive integer from 1 to 9) .On the basis of our results and previous work,it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  5. The Electrical Conductivity of Gabbro at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    王多君; 李和平; 易丽; 张卫刚; 刘丛强; 苏根利; 丁东业

    2002-01-01

    The electric conductivity of gabbro has been measured at 1.0 - 2.0 GPa and 320-700℃, and the conduction mechanism has been analyzed in terms of the impedance spectra.Experimental results indicated that the electric conductivity depends on the frequency of alternative current. Impedance arcs representing the conduction mechanism of grain interiors are displayed in the complex impedance plane, and the mechanism is dominated at high pressure.These arcs occur over the range of 102 - k× 105 Hz (k is the positive integer from 1 to 9). On the basis of our results and previous work, it is concluded that gabbro cannot form any high conductivity layer (HCL) in the middle-lower crust.

  6. Impedance spectroscopy analysis on electrical properties of serpentine at high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    朱茂旭; 谢鸿森; 郭捷; 许祖鸣; 白武明

    2001-01-01

    The electrical conductivity of serpentine is measured and the microscopic conductance mechanisms are investigated with impedance spectroscopy at 2.5-4.0 GPa and 220-780℃. The results show that the electrical conductivity is strongly dependent on the frequencies used, and that only arcⅠ, which reflects grain interior conductance, occurs and dominates the whole conductance processes over 12-105 Hz at high pressure before dehydration. The arcⅡ, which indicates the grain boundary process, begins to occur at the initial stage of dehydration. After dehydration, due to the presence of highly conductive networks of free water, the electrical conductivity is not depen-dent on frequencies any longer and the total electrical conductivity is dominated by process of ionic conductance of free water in interconnected networks. Dehydration of serpentine enhances pro-nouncedly the total electrical conductivity, through which highly conductive layers (HCL) may be formed in the earth's interior.

  7. Short-time Oxidation of Alloy 690 in High-temperature and High-pressure Steam and Water

    Institute of Scientific and Technical Information of China (English)

    F. Huang; J.Q. Wang; E.H. Han; W. Ke

    2012-01-01

    The oxidation behavior of alloy 690 exposed to high-temperature and high-pressure steam and water at 280℃ for 1 h was investigated by scanning electron microscopy (SEM), atomic force microscopy (AFM) and X-ray photoelectron spectroscopy (XPS). In high-temperature and high-pressure steam, the oxide film is composed of an outermost Ni-rich hydroxides layer, an intermediate layer of hydroxides and oxides enriched in Cr, an inner oxide layer. The film formed in high-temperature water is similar to that in steam, except for missing the Ni-rich hydroxides layer. Samples with different surface finishes (electropolished, mechanically polished, ground, and as-received) were prepared for comparison. A general increase of the oxide thickness with the degree of surface roughness is observed. The equivalent oxide thicknesses lie in the range of 100-200 nm for the as-received samples, 150-250 nm for the samples ground to 400# and 10-20 nm for the samples ground to 1500#, mechanically polished, and electropolished.

  8. The effect of High Pressure and High Temperature processing on carotenoids and chlorophylls content in some vegetables.

    Science.gov (United States)

    Sánchez, Celia; Baranda, Ana Beatriz; Martínez de Marañón, Iñigo

    2014-11-15

    The effect of High Pressure (HP) and High Pressure High Temperature (HPHT) processing on carotenoid and chlorophyll content of six vegetables was evaluated. In general, carotenoid content was not significantly influenced by HP or HPHT treatments (625 MPa; 5 min; 20, 70 and 117 °C). Regarding chlorophylls, HP treatment caused no degradation or slight increases, while HPHT processes degraded both chlorophylls. Chlorophyll b was more stable than chlorophyll a at 70 °C, but both of them were highly degraded at 117 °C. HPHT treatment at 117 °C provided products with a good retention of carotenoids and colour in the case of red vegetables. Even though the carotenoids also remained in the green vegetables, their chlorophylls and therefore their colour were so affected that milder temperatures need to be applied. As an industrial scale equipment was used, results will be useful for future industrial implementation of this technology.

  9. Solubility Measurements and Modeling of Zinc, Lead and Iron Sulfides at High Temperatures and High Pressures

    DEFF Research Database (Denmark)

    Carolina Figueroa Murcia, Diana; Fosbøl, Philip Loldrup; Thomsen, Kaj

    Solubility measurements of sulfides in aqueous solutions are necessary to understand the behaviour of these scaling minerals in geothermal and oil reservoirs. The low solubility levels of Zinc Sulfide (ZnS), Lead Sulfide (PbS) and Iron Sulfide (FeS) make the solubility measurements a challenging...... task. Consequently existing data are rare and scattered. The aim of this work is to develop a reliable experimental procedure and to measure solubility of sulfides at high temperature and pressures. Additionally the experimental data are used for estimation of the solid-liquid equilibrium using...... oxygen atmosphere to avoid the risk of oxidation of sulfide minerals. The solution is kept in an equilibrium cell at constant temperature and pressure with continuous stirring. The concentration of Zn2+, Pb2+, Fe2+ and S2- are measured using Inductively Coupled Plasma Optical Emission spectrometry (ICP...

  10. High-temperature high-pressure gas cleanup with ceramic bag filters. Draft final report

    Energy Technology Data Exchange (ETDEWEB)

    Shackleton, M.; Chang, R.; Sawyer, J.; Kuby, W.; Turner-Tamiyasu, E.

    1982-12-06

    Advanced processes designed for the efficient use of coal in the production of energy will benefit from, or even depend upon, highly efficient, economical, high-temperature removal systems for fine particulates. In the case of pressurized fluidized-bed combustion (PFBC), the hot gas cleanup device must operate at approximately 1600/sup 0/F. Existing commercial filter systems are temperature limited due to the filter material, but ceramic fibers intended for refractory insulation offer the promise of a practical high-temperature filter media if they can be incorporated into a design which combines filter performance with acceptable durability. The current work was initiated to further develop and demonstrate on a larger-scale basis, a ceramic fiber filtration system for application to coal-fired PFBC's. The development effort centered around the need to replace the knit metal wire scrim, used in earlier designs as support for the fine fiber ceramic mat filtration medium, with a corrosion-resistant material. This led to the selection of woven ceramic cloth for support of the mat layer. Because of the substantial difference in strength and other material properties between the metal and ceramic cloth, tests were necessary to optimize the filter; pulse parameters such as pulse duration, pulse pressure, and pulse injection orifice size; woven cloth mesh configuration; the technique for clamping the bag to the support; and similar structural, fluid, and control parameters. The demonstration effort included both tests to prove this concept in a real application and a systems analysis to show commercial feasibility of the ceramic filtration approach for hot gas cleanup in PFBC's. 12 references, 57 figures, 23 tables.

  11. Gas-Liquid Mass Transfer in a Slurry Bubble Column Reactor under High Temperature andHigh Pressure

    Institute of Scientific and Technical Information of China (English)

    杨卫国; 王金福; 金涌

    2001-01-01

    The gas-liquid mass transfer of H2 and CO in a high temperature and high-pressure three-phase slurry bubble column reactor is studied. The gas-liquid volumetric mass transfer coefficients kLa are obtained by measuring the dissolution rate of H2 and CO. The influences of the main operation conditions, such as temperature, pressure,superficial gas velocity and solid concentration, are studied systematically. Two empirical correlations are proposed to predict kLa values for H2 and CO in liquid paraffln/solid particles slurry bubble column reactors.

  12. Structural analysis of liquid aluminum at high pressure and high temperature using the hard sphere model

    Science.gov (United States)

    Ikuta, Daijo; Kono, Yoshio; Shen, Guoyin

    2016-10-01

    The structure of liquid aluminum is measured up to 6.9 GPa and 1773 K using a multi-angle energy-dispersive X-ray diffraction method in a Paris-Edinburgh press. The effect of pressure and temperature on the structure and density of liquid aluminum is analyzed by means of the hard sphere model. Peak positions in the structure factor of liquid aluminum show a nearly constant value with varying temperatures at ˜1-2 GPa and slightly change with varying pressures up to 6.9 GPa at 1173-1773 K. In contrast, the height of the first peak in the structure factor significantly changes with varying pressures and temperatures. Hard sphere model analysis shows that the structure of liquid aluminum in the pressure-temperature range of this study is controlled mostly by the packing fraction with only a minor change in hard sphere diameters. The obtained packing fractions and hard sphere diameters are used to calculate densities of liquid aluminum at high pressure-temperature conditions.

  13. In-Situ Conductivity Measurement of BaF2 under High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    HAO Ai-Min; LI Xiao-Dong; LIU Jing; GAO Chun-Xiao; LI Ming; HE Chun-Yuan; HUANG Xiao-Wei; ZHANG Dong-Mei; YU Cui-Ling; ZOU Guang-Tian; LI Yan-Chun

    2006-01-01

    @@ We perform the in-situ conductivity measurement on BaF2 at high pressure using a microcircuit fabricated on a diamond anvil cell. The results show that BaF2 initially exhibits the electrical property of an insulator at pressure below 25 Gpa, it transforms to a wide energy gap semiconductor at pressure from 25 to 30 Gpa, and the conductivity increases gradually with increasing pressure from 30 Gpa. However, the metallization predicted by theoretical calculation at 30-33 Gpa cannot be observed. In addition, we measure the temperature dependence of the conductivity at several pressures and obtain the relationship between the energy gap and pressure. Based on the experimental data, it is predicted that BaF2 would transform to a metal at about 87 Gpa and ambient temperature. The conductivity of BaF2 reaches the order of 10-3Ω-1 cm-1 at 37 Gpa and 2400 K, the superionic conduction is not observed during the experiments, indicating the application of pressure elevates greatly the transition temperature of the superionic conduction.

  14. High-Pressure-High-Temperature Processing Reduces Maillard Reaction and Viscosity in Whey Protein-Sugar Solutions.

    Science.gov (United States)

    Avila Ruiz, Geraldine; Xi, Bingyan; Minor, Marcel; Sala, Guido; van Boekel, Martinus; Fogliano, Vincenzo; Stieger, Markus

    2016-09-28

    The aim of the study was to determine the influence of pressure in high-pressure-high-temperature (HPHT) processing on Maillard reactions and protein aggregation of whey protein-sugar solutions. Solutions of whey protein isolate containing either glucose or trehalose at pH 6, 7, and 9 were treated by HPHT processing or conventional high-temperature (HT) treatments. Browning was reduced, and early and advanced Maillard reactions were retarded under HPHT processing at all pH values compared to HT treatment. HPHT induced a larger pH drop than HT treatments, especially at pH 9, which was not associated with Maillard reactions. After HPHT processing at pH 7, protein aggregation and viscosity of whey protein isolate-glucose/trehalose solutions remained unchanged. It was concluded that HPHT processing can potentially improve the quality of protein-sugar-containing foods, for which browning and high viscosities are undesired, such as high-protein beverages.

  15. High temperature superconductivity in sulfur and selenium hydrides at high pressure

    Science.gov (United States)

    Flores-Livas, José A.; Sanna, Antonio; Gross, E. K. U.

    2016-03-01

    Due to its low atomic mass, hydrogen is the most promising element to search for high-temperature phononic superconductors. However, metallic phases of hydrogen are only expected at extreme pressures (400 GPa or higher). The measurement of the record superconducting critical temperature of 203 K in a hydrogen-sulfur compound at 160 GPa of pressure [A.P. Drozdov, M.I. Eremets, I.A. Troyan, arXiv:1412.0460; [cond-mat.supr-con] (2014); A.P. Drozdov, M.I. Eremets, I.A. Troyan, V. Ksenofontov, S.I. Shylin, Nature 525, 73 (2015)], shows that metallization of hydrogen can be reached at significantly lower pressure by inserting it in the matrix of other elements. In this work we investigate the phase diagram and the superconducting properties of the H-S systems by means of minima hopping method for structure prediction and density functional theory for superconductors. We also show that Se-H has a similar phase diagram as its sulfur counterpart as well as high superconducting critical temperature. We predict H3Se to exceed 120 K superconductivity at 100 GPa. We show that both H3Se and H3S, due to the critical temperature and peculiar electronic structure, present rather unusual superconducting properties. Supplementary material in the form of one pdf file available from the Journal web page at: http://dx.doi.org/10.1140/epjb/e2016-70020-0

  16. Rheological properties of oil-based drilling fluids at high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    赵胜英; 鄢捷年; 舒勇; 张洪霞

    2008-01-01

    The rheological properties of two kinds of oil-based drilling fluids with typically composition were studied at pressures up to 138 MPa and temperatures up to 204 ℃ using the RheoChan 7400 Rheometer.The experimental results show that the apparent viscosity,plastic viscosity and yield point decrease with the increase of temperature,and increase with the increase of pressure.The effect of pressure on the apparent viscosity,plastic viscosity and yield point is considerable at ambient temperature.However,this effect gradually reduces with the increase of temperature.The major factor influencing the rheological properties of oil-based drilling fluids is temperature instead of pressure in the deep sections of oil wells.On the basis of numerous experiments,the model for predict the apparent viscosity,plastic viscosity and yield point of oil-based drilling fluids at high temperature and pressure was established using the method of regressive analysis.It is confirmed that the calculated data are in good agreement with the measured data,and the correlation coefficients are more than 0.98.The model is convenient for use and suitable for the application in drilling operations.

  17. Raman Scattering Spectroscopy of Phase Transition in n-Pentadecane under High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    QIAO Er-Wei; ZHENG Hai-Fei; XU Bei

    2009-01-01

    The Raman spectroscopy of n-pentadecane is investigated in a moissanite anvil cell at normal temperatures and a diamond anvil cell under pressure to about 3000 MPa and at temperature from 298 to 573 K. Result indicates that at room temperature the vibration modes, assigned to the symmetric and asymmetric stretching of CH3 and CH2 stretching, shift to higher frequency and display a pressure dependent quasi-linear curve. A liquid-solid phase transition appears at a pressure of 150 MPa. The high temperature solidus line of n-pentadecane follows a quadratic function of P = 0.02369T2 - 9.117T + 725.58, in agreement with previous conclusion derived from studies of other hydrocarbons. Upon phase transition, fitting the experimental data obtained in a temperature range of 283-553 K to the Clausius-Clapeyron equation allows one to define the thermodynamic parameters of n-pentadecane of dP/dT = 0.04738T - 9.117.

  18. High-temperature, high-pressure bonding of nested tubular metallic components

    Science.gov (United States)

    Quinby, T.C.

    A tool is described for effecting high-temperature, high-compression bonding between the confronting faces of nested, tubular, metallic components. In a typical application, the tool is used to produce tubular target assemblies for irradiation in nuclear reactors or particle accelerators. The target assembly comprising a uranum foil and an aluninum-alloy substrate. The tool is composed of graphite. It comprises a tubular restraining member in which a mechanically expandable tubular core is mounted to form an annulus. The components to be bonded are mounted in nested relation in the annulus. The expandable core is formed of individually movable, axially elongated segments whose outer faces cooperatively define a cylindrical pressing surface and whose inner faces cooperatively define two opposed, inwardly tapered, axial bores. Tapered rams extend into the bores. The loaded tool is mounted in a conventional hot-press provided with evacuation means, heaters for maintaining its interior at bonding temperature, and hydraulic cylinders for maintaining a selected inwardly directed pressure on the tapered rams. With the hot-press evacuated and the loaded tool at the desired temperature, the cylinders are actuated to apply the selected pressure to the rams. The rams in turn expand the segmented core to maintain the nested components in compression against the restraining member. These conditions are maintained until the confronting faces of the nested components are joined in a continuous, uniform bond characterized by high thermal conductivity.

  19. Impedance spectroscopy analysis on electrical properties of serpentine at high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    ZHU; Maoxu; (

    2001-01-01

    [1]Stesky, R. M., Brace, W. F., Electrical conductivity of serpentinized rocks to 6 kilobar, J. Geophys. Res., 1973, 78 (32): 7614-7621.[2]Zhu Maoxu, Xie Hongsen, Experimental studies on electrical properties of materials in the earth's interior, Advancement in Geosciences (in Chinese), 1998, 13(5): 438-446.[3]Roberts, J. J., Tyburczy, J. A., Frequency dependent electrical properties of polycrystalline olivine compacts, J. Geophys. Res., 1991, 96 (B10): 16205-16222.[4]Roberts, J. J., Tyburczy, J. A., Frequency dependent electrical properties of minerals and partial-melts, Surv. Geophys., 1994, 15: 239-262.[5]Huebner, I. S., Dillenburg, R. G., Impedance spectra of hot, dry silicate minerals and rock: Qualitative interpretation of spectra, Amer. Mineral, 1995, 80: 46-64.[6]Kavner, A., Li, X-Y, Jeanloz, R., Electrical conductivity of a natural (Mg, Fe)SiO3 majorite garnet, Geophys. Res. Lett., 1995, 22 (22): 3103-3106.[7]Hicks, T. L., Secco, R., Dehydration and decomposition of pyrophyllite at high pressure: Electrical conductivity and X-ray diffraction studies to 5 Gpa, Can. J. Earth Sci., 1997, 34: 875-882.[8]Li, X-Y, Jeanloz, R., Effect of iron content on the electrical conductivity of perovskite and magnesiowustite assemblages at lower mantle condition, J. Geophys. Res., 1991, 96(B4): 6113-6120.[9]Xie Hongsen, Introduction to the Materials in the Earth's Interior (in Chinese), Beijing: Science Press, 1997, 42-53.[10] Tatsurmi, Y., Migration of fluid phase and genesis of basalt magmas in subduction zone, J. Geophys. Res., 1989, 94: 4697-4707.[11] Duba, A., Huenges, G., Nover, E. et al., Impedance of black shale from munsterland 1 borehole: An anomalously good conductor? Geophys. J., 1988, 94: 413-419.[12] Watanabe, T., Kurita, K., The relationship between electrical conductivity and melt fraction in a partially molten simple system: Archies's law behavior, Phys. Earth Planet Inter., 1993, 78: 9-17.[13] Macdonald

  20. Impact of different water activities (aw adjusted by solutes on high pressure high temperature inactivation of Bacillus amyloliquefaciens spores

    Directory of Open Access Journals (Sweden)

    Robert eSevenich

    2015-07-01

    Full Text Available Much research has been conducted to comprehend the mechanisms of high pressure (HP inactivation of spores in aqueous systems but for food model systems these information are scarce. In these systems spores can interact with ingredients which could lead to retarded inactivation, which can cause a problem for the sterilization process. The protective mechanism of a reduced a_W-value is still unclear. HP processing might prove valuable to overcome protective effects of solutes and achieve shorter process times for sterilization under HP. To gain insight into the underlying mechanisms five a_W-values (0.9, 0.92, 0.94, 0.96, 1 were adjusted with 2 different solutes (NaCl, sucrose. Solutions were inoculated with spores of Bacillus amyloliquefaciens and treated at 105,110°C and115°C at 600 MPa. A thermal inactivation was conducted at the same temperatures for a compraison with the high pressure data. The influence of high pressure high temperature treatment on the inactivation, the DPA-release and membrane constitution was assessed by plate count, HPLC and flow cytometry. The results show that during HP treatments sucrose and salt both have a protective effect, in which the influence of sucrose on the retarded inactivation is higher. The threshold aw, which is 0.94, here salt and sucrose have a significant influence on the inactivation. The comparison of thermal (105-115°C and high pressure and high temperature (600 MPa, 105-115°C treated samples showed that the time needed to achieve a 4-5 log inactivation can be reduced at 600 MPa.The release of dipicolinic acid (DPA is the rate limiting step of the inactivation and therefore monitoring the release is of great interest. The DPA-release is slowed is slowed down in high concentrated solutions (e.g. sucrose, salt in comparison to aw 1. Maybe as shown for vegetative microorganism the solutes can interact with membranes, e.g. inner spore membrane. FCM (flow cytometry measurement data show a similar

  1. Effects of a carbon convection field on large diamond growth under high-pressure high-temperature conditions

    Institute of Scientific and Technical Information of China (English)

    Hu Mei-Hua; Li Shang-Sheng; Ma Hong-An; Su Tai-Chao; Li Xiao-Lei; Hu Qiang; Jia Xiao-Peng

    2012-01-01

    Large diamond crystals were successfully synthesized by a FeNi-C system using the temperature gradient method under high-pressure high-temperature conditions.The assembly of the growth cell was improved and the growth process of diamond was investigated.Effects of the symmetry of the carbon convection field around the growing diamond crystal were investigated systematically by adjusting the position of the seed crystal in the melted catalyst/solvent.The results indicate that the morphologies and metal inclusion distributions of the synthetic diamond crystals vary obviously in both symmetric and non-symmetric carbon convection fields with temperature.Moreover,the finite element method was applied to analyze the carbon convection mode of the melted catalyst/solvent around the diamond crystal.This work is helpful for understanding the growth mechanism of diamond.

  2. System overview and characterization of a high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier

    Energy Technology Data Exchange (ETDEWEB)

    Kelley, Madison A.; Dreyer, Christopher B.; Parker, Terence E.; Porter, Jason M., E-mail: jporter@mines.edu [Department of Mechanical Engineering, Colorado School of Mines, Golden, Colorado 80401 (United States); Jakulewicz, Micah S. [Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States)

    2015-05-15

    The high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier at the Colorado School of Mines, including the primary systems and the supporting subsystems, is presented. The gasifier is capable of operating at temperatures and pressures up to 1650 °C and 40 bar. The heated section of the reactor column has an inner diameter of 50 mm and is 1 m long. Solid organic feedstock (e.g., coal, biomass, and solid waste) is ground into batches with particle sizes ranging from 25 to 90 μm and is delivered to the reactor at feed rates of 2–20 g/min. The maximum useful power output of the syngas is 10 kW, with a nominal power output of 1.2 kW. The initial characterization and demonstration results of the gasifier system with a coal feedstock are also reported.

  3. System overview and characterization of a high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier

    Science.gov (United States)

    Kelley, Madison A.; Jakulewicz, Micah S.; Dreyer, Christopher B.; Parker, Terence E.; Porter, Jason M.

    2015-05-01

    The high-temperature, high-pressure, entrained-flow, laboratory-scale gasifier at the Colorado School of Mines, including the primary systems and the supporting subsystems, is presented. The gasifier is capable of operating at temperatures and pressures up to 1650 °C and 40 bar. The heated section of the reactor column has an inner diameter of 50 mm and is 1 m long. Solid organic feedstock (e.g., coal, biomass, and solid waste) is ground into batches with particle sizes ranging from 25 to 90 μm and is delivered to the reactor at feed rates of 2-20 g/min. The maximum useful power output of the syngas is 10 kW, with a nominal power output of 1.2 kW. The initial characterization and demonstration results of the gasifier system with a coal feedstock are also reported.

  4. Interfacial Evolution of Cement and Steel in CO2 Dissolved Solution Under High Temperature and High Pressure

    Science.gov (United States)

    Ren, Chengqiang; Peng, Ye; Li, Bing; Wang, Shuliang; Shi, Taihe

    2016-09-01

    The experiments were operated for the cylindrical sample (cement/steel) in high temperature and high pressure (HTHP) CO2 environment to simulate surrounding CO2 attack in oil and gas well. The interfacial evolutions between well cement and casing steel were measured, including mechanical property, structure alteration, chemical change and electrochemical character. The interfacial behaviors are attributed to the competition of hydration and degradation of Portland cement. The damage at the interface was faster than the cement bulk deterioration by carbonation. Thus, the interface provided a potential flow leakage pathway for the HTHP gas and fluid in the well, so improving interfacial stability between well cement and casing steel is the key issue to long-term zonal isolation.

  5. Effects of Mg on diamond growth and properties in Fe-C system under high pressure and high temperature condition

    Science.gov (United States)

    Huang, Guo-Feng; Zheng, You-Jin; Li, Zhan-Chang; Gao, Qiang; Ma, Zhuo; Shi, Si-Ming; Jiang, Bao-Gang; Zhao, He

    2016-08-01

    Diamond crystal crystallized in Fe-Mg-C system with Archimedes buoyancy as a driving force is established under high pressure and high temperature conditions. The experimental results indicate that the addition of the Mg element results in the nitrogen concentration increasing from 87 ppm to 271 ppm in the diamond structure. The occurrence of the {100} plane reveals that the surface character is remarkably changed due to the addition of Mg. Micro-Raman spectra indicate that the half width of full maximum is in a range of 3.01 cm-1-3.26 cm-1, implying an extremely good quality of diamond specimens in crystallization. Project supported by the Natural Science Foundation of Inner Mongolia Autonomous Region, China (Grant No. 2013MS0809) and the Open Project of Key Laboratory of Functional Materials Physics and Chemistry (Jilin Normal University) of the Ministry of Education of China (Grant No. 201608).

  6. High-pressure high-temperature equations of state of UO2 and ThO2

    Science.gov (United States)

    Chidester, B.; Campbell, A. J.; Fischer, R. A.; Reaman, D. M.; Heinz, D. L.; Prakapenka, V.

    2013-12-01

    The actinide elements uranium and thorium are important from the standpoint of heat production in the deep Earth. However, the host mineral phases and distribution of these elements in the mantle are not well constrained. Here we investigate the crystal chemistry and coordination preferences of these elements in simple oxides. Room-temperature high-pressure equations of state of uranium dioxide (UO2) and thorium dioxide (ThO2) have been reported [1-5], but no in situ high-pressure, high-temperature (high P-T) data are available for these compounds. We present results from a high P-T synchrotron x-ray diffraction study of the equations of state and observed phase relations of UO2 and ThO2. High-pressure, high-temperature in situ X-ray diffraction data were obtained at beamline 13-ID-D of the Advanced Photon Source, and room temperature compression data were obtained at beamline 12.2.2 of the Advanced Light Source. We observed that UO2 exists only in the cubic fluorite structure (space group Fm3m) up to 32 GPa and 2300 K. By fitting these P-V-T data to a Birch-Murnaghan equation of state (EOS), we obtain the thermodynamic parameters K0 = 222 × 3.9 GPa and the thermal contribution to pressure, αK = 0.00254 × 0.00044 GPa/K (V0 = 24.51 cm3/mol and K0' = 5, fixed). At ~46 GPa and up to 2400 K, the cubic structure was found to coexist with a high-pressure phase, which we indexed as the orthorhombic Pnma space group (Z=8). Above this pressure, only the orthorhombic structure was observed up to 61 GPa and 2400 K. The EOS parameters for this phase are V0 = 23.84 × 0.20 cm3/mol, K0 = 187 × 10 GPa and αK = 0.00308 × 0.00042 GPa/K (K0' = 4, fixed). Similarly, ThO2 has the fluorite (Fm3m) structure up to ~23 GPa. The EOS parameters for this phase are K0 = 199 × 10 GPa, K0' = 7.1 × 2.0 and αK = 0.00656 × 0.00092 GPa/K (V0 = 26.38 cm3/mol, fixed). The cubic phase was observed to coexist with an orthorhombic phase (Pnma, Z=4) between 27 and 31 GPa and up to 1900 K. Above

  7. Six-axis multi-anvil press for high-pressure, high-temperature neutron diffraction experiments.

    Science.gov (United States)

    Sano-Furukawa, A; Hattori, T; Arima, H; Yamada, A; Tabata, S; Kondo, M; Nakamura, A; Kagi, H; Yagi, T

    2014-11-01

    We developed a six-axis multi-anvil press, ATSUHIME, for high-pressure and high-temperature in situ time-of-flight neutron powder diffraction experiments. The press has six orthogonally oriented hydraulic rams that operate individually to compress a cubic sample assembly. Experiments indicate that the press can generate pressures up to 9.3 GPa and temperatures up to 2000 K using a 6-6-type cell assembly, with available sample volume of about 50 mm(3). Using a 6-8-type cell assembly, the available conditions expand to 16 GPa and 1273 K. Because the six-axis press has no guide blocks, there is sufficient space around the sample to use the aperture for diffraction and place an incident slit, radial collimators, and a neutron imaging camera close to the sample. Combination of the six-axis press and the collimation devices realized high-quality diffraction pattern with no contamination from the heater or the sample container surrounding the sample. This press constitutes a new tool for using neutron diffraction to study the structures of crystals and liquids under high pressures and temperatures.

  8. Research of stress corrosion cracking of T225NG titanium alloy in loop water of high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    Xu Jijin; Yan Keng; Chen Ligong; Jiang Chengyu

    2006-01-01

    Double cantilever beam (DCB) specimens were used to research the stress corrosion cracking of T225NG titanium alloy in loop water of high temperature and high pressure. DCB specimens were forced pre-stress, put into high pressure autoclave, and the stress corrosion and crack expansion of specimens were observed and measured in 500 h, 1 000 h and 2 000h respectively. The results show that small expansion occurred along the direction of pre-cracking. According to calculation,the speed of cracking expansion is lower than 10 -9 m/s in 500 h and the value of KIscc/KI is higher than 0. 75, which proves that T225NG has an excellent corrosion resistance in loop water. The main reason is that there is an oxide film on the surface of specimens. According to the analysis of energy dispersive spectroscopy (EDS) and X-ray diffraction (XRD), the oxide film consists of TiO2. Therefore, the oxide film at the crack tip impedes the hydrogen separating out from the cathode to penetrate into titanium alloy and resists hydrogen embrittlement.

  9. Experimental measurement of the electrical conductivity of single crystal olivine at high temperature and high pressure under different oxygen fugacities

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    At 1.0-4.0 GPa and 1123-1473 K and under oxygen fugacity-controlled conditions (Ni + NiO, Fe + Fe3O4, Fe +FeO and Mo + MoO2 buffers), a YJ-3000t Model six-anvil solid high-pressure apparatus and a Sarltron-1260 Impedance/Gain-Phase analyzer were employed to conduct an in situ measurement of the electrical conductivity of single crystal olivine. Experimental results showed that: (1) within the range of experimentally selected frequencies (103-106 Hz), the electrical conductivity of the sample is of great dependence on the frequency; (2) with the rise of temperature (T), the electrical conductivity (σ) will increase, and the Arrenhius linear relationship is established between lgσ and 1/T; (3) under the control of oxygen buffer Fe + Fe3O4, with the rise of pressure, the electrical conductivity tends to decrease whereas the activation enthalpy and independent-of-temperature preexponential factor tend to increase,with the activation energy and activation volume of the sample estimated at ( 1.25 ± 0.08) eV and (0. 105 ± 0. 025) cm3/mol, respectively; (4) under given pressure and temperature conditions, the electrical conductivity tends to increase whereas the activation energy tends to decrease with increasing oxygen fugacity; and (5) the mechanism of electrical conduction of small polarons can provide insight into the behavior of electrical conduction of olivine under high pressure and high temperature.

  10. Six-axis multi-anvil press for high-pressure, high-temperature neutron diffraction experiments

    Energy Technology Data Exchange (ETDEWEB)

    Sano-Furukawa, A., E-mail: sano.asami@jaea.go.jp; Hattori, T. [Quantum Beam Science Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); J-PARC Center, Japan Atomic Energy Agency, Ibaraki 319-1195 (Japan); Arima, H. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Yamada, A. [The University of Shiga Prefecture, Shiga 522-8533 (Japan); Tabata, S.; Kondo, M.; Nakamura, A. [Sumitomo Heavy Industries Co., Ltd., Ehime 792-0001 (Japan); Kagi, H.; Yagi, T. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan)

    2014-11-15

    We developed a six-axis multi-anvil press, ATSUHIME, for high-pressure and high-temperature in situ time-of-flight neutron powder diffraction experiments. The press has six orthogonally oriented hydraulic rams that operate individually to compress a cubic sample assembly. Experiments indicate that the press can generate pressures up to 9.3 GPa and temperatures up to 2000 K using a 6-6-type cell assembly, with available sample volume of about 50 mm{sup 3}. Using a 6-8-type cell assembly, the available conditions expand to 16 GPa and 1273 K. Because the six-axis press has no guide blocks, there is sufficient space around the sample to use the aperture for diffraction and place an incident slit, radial collimators, and a neutron imaging camera close to the sample. Combination of the six-axis press and the collimation devices realized high-quality diffraction pattern with no contamination from the heater or the sample container surrounding the sample. This press constitutes a new tool for using neutron diffraction to study the structures of crystals and liquids under high pressures and temperatures.

  11. Flash flow pyrolysis: mimicking flash vacuum pyrolysis in a high-temperature/high-pressure liquid-phase microreactor environment.

    Science.gov (United States)

    Cantillo, David; Sheibani, Hassan; Kappe, C Oliver

    2012-03-02

    Flash vacuum pyrolysis (FVP) is a gas-phase continuous-flow technique where a substrate is sublimed through a hot quartz tube under high vacuum at temperatures of 400-1100 °C. Thermal activation occurs mainly by molecule-wall collisions with contact times in the region of milliseconds. As a preparative method, FVP is used mainly to induce intramolecular high-temperature transformations leading to products that cannot easily be obtained by other methods. It is demonstrated herein that liquid-phase high-temperature/high-pressure (high-T/p) microreactor conditions (160-350 °C, 90-180 bar) employing near- or supercritical fluids as reaction media can mimic the results obtained using preparative gas-phase FVP protocols. The high-T/p liquid-phase "flash flow pyrolysis" (FFP) technique was applied to the thermolysis of Meldrum's acid derivatives, pyrrole-2,3-diones, and pyrrole-2-carboxylic esters, producing the expected target heterocycles in high yields with residence times between 10 s and 10 min. The exact control over flow rate (and thus residence time) using the liquid-phase FFP method allows a tuning of reaction selectivities not easily achievable using FVP. Since the solution-phase FFP method does not require the substrate to be volatile any more--a major limitation in classical FVP--the transformations become readily scalable, allowing higher productivities and space-time yields compared with gas-phase protocols. Differential scanning calorimetry measurements and extensive DFT calculations provided essential information on pyrolysis energy barriers and the involved reaction mechanisms. A correlation between computed activation energies and experimental gas-phase FVP (molecule-wall collisions) and liquid-phase FFP (molecule-molecule collisions) pyrolysis temperatures was derived.

  12. High-pressure and high-temperature differential scanning calorimeter for combined pressure-concentration-temperature measurements of hydrides.

    Science.gov (United States)

    Mauron, Ph; Bielmann, M; Bissig, V; Remhof, A; Züttel, A

    2009-09-01

    The design and construction of a high-pressure (200 bar) and high-temperature (600 degrees C) heat-flow differential scanning calorimeter (DSC) for the in situ investigation of the hydrogenation and dehydrogenation reactions of hydrides is presented. In combination with a pressure-concentration-temperature (pcT) system, simultaneous thermodynamic and volumetric measurements become accessible. Due to the high thermal conductivity of hydrogen, only the sample cell and the reference cell are exposed to hydrogen and the remaining system is under ambient conditions. This separation has the advantage that the calibration factor is independent of the hydrogen pressure. The internal empty volume of the combined system is as low as possible to maximize the precision of the pcT measurements. The calorimetric block of the DSC is designed with a silver/copper alloy and the temperature measurements are made resistively with platinum temperature sensors (Pt 100). The instrument was calibrated and its operability was successfully studied on the example of the hydrogen sorption behavior of LaNi(5).

  13. Whole ceramic-like microreactors from inorganic polymers for high temperature or/and high pressure chemical syntheses.

    Science.gov (United States)

    Ren, Wurong; Perumal, Jayakumar; Wang, Jun; Wang, Hao; Sharma, Siddharth; Kim, Dong-Pyo

    2014-02-21

    Two types of whole ceramic-like microreactors were fabricated from inorganic polymers, polysilsesquioxane (POSS) and polyvinylsilazane (PVSZ), that were embedded with either perfluoroalkoxy (PFA) tube or polystyrene (PS) film templates, and subsequently the templates were removed by physical removal (PFA tube) or thermal decomposition (PS). A POSS derived ceramic-like microreactor with a 10 cm long serpentine channel was obtained by an additional "selective blocking of microchannel" step and subsequent annealing at 300 °C for 1 h, while a PVSZ derived ceramic-like microreactor with a 14 cm long channel was yielded by a co-firing process of the PVSZ-PS composite at 500 °C for 2 h that led to complete decomposition of the film template leaving a microchannel behind. The obtained whole ceramic-like microfluidic devices revealed excellent chemical and thermal stabilities in various solvents, and they were able to demonstrate unique chemical performance at high temperature or/and high pressure conditions such as Michaelis-Arbuzov rearrangement at 150-170 °C, Wolff-Kishner reduction at 200 °C, synthesis of super-paramagnetic Fe3O4 nanoparticles at 320 °C and isomerisation of allyloxybenzene to 2-allylphenol (250 °C and 400 psi). These economic ceramic-like microreactors fabricated by a facile non-lithographic method displayed excellent utility under challenging conditions that is superior to any plastic microreactors and comparable to glass and metal microreactors with high cost.

  14. Novel experimental design for high pressure-high temperature electrical resistance measurements in a "Paris-Edinburgh" large volume press

    Science.gov (United States)

    Matityahu, Shlomi; Emuna, Moran; Yahel, Eyal; Makov, Guy; Greenberg, Yaron

    2015-04-01

    We present a novel experimental design for high sensitivity measurements of the electrical resistance of samples at high pressures (0-6 GPa) and high temperatures (300-1000 K) in a "Paris-Edinburgh" type large volume press. Uniquely, the electrical measurements are carried out directly on a small sample, thus greatly increasing the sensitivity of the measurement. The sensitivity to even minor changes in electrical resistance can be used to clearly identify phase transitions in material samples. Electrical resistance measurements are relatively simple and rapid to execute and the efficacy of the present experimental design is demonstrated by measuring the electrical resistance of Pb, Sn, and Bi across a wide domain of temperature-pressure phase space and employing it to identify the loci of phase transitions. Based on these results, the phase diagrams of these elements are reconstructed to high accuracy and found to be in excellent agreement with previous studies. In particular, by mapping the locations of several well-studied reference points in the phase diagram of Sn and Bi, it is demonstrated that a standard calibration exists for the temperature and pressure, thus eliminating the need for direct or indirect temperature and pressure measurements. The present technique will allow simple and accurate mapping of phase diagrams under extreme conditions and may be of particular importance in advancing studies of liquid state anomalies.

  15. Twin Diamond Crystals Grown at High Temperature and High Pressure from the Fe-Ni-C System

    Institute of Scientific and Technical Information of China (English)

    尹龙卫; 袁泉; 李木森; 刘玉先; 许斌; 郝兆印

    2002-01-01

    Twin diamond crystals grown at high temperature and high pressure (HPHT) in the presence of FeNi catalyst have been examined by transmission electron microscopy (TEM). Direct observation by TEM shows that there are a large amount of twins which lie on the {111} planes in the HPHT-grown diamonds. The twins in the diamond may be formed and may extend into the inner crystal from the twin nucleus formed in the nucleation process.The twins can be formed due to the carbon atoms falling mistakenly into positions where a twin crystal can form during diamond growth, or condensation of supersaturated vacancies on the {111} plane. Some hexagonal dislocation loops related to supersaturated vacancies are found on the twins. The Moiré fringe image reveals that stacking faults terminate on the intersecting twin boundary. This suggests that, at the temperature that the HPHT diamond is grown, the bordering partial has propagated by gliding up to the twin interface, which can be described by the reaction of a Shockley partial dislocation with a twin on the {111} plane.

  16. A high-temperature high-pressure calorimeter for determining heats of solution up to 623 K.

    Science.gov (United States)

    Djamali, Essmaiil; Turner, Peter J; Murray, Richard C; Cobble, James W

    2010-07-01

    A high-temperature high-pressure isoperibol calorimeter for determining the heats of solution and reaction of very dilute substances in water (10(-4) m) at temperatures up to 623 K is described. The energies of vaporization of water at steam saturation pressure were measured as a function of temperature and the results agree with the corresponding values from steam tables to better than 0.08+/-0.18%. The novelties of the present instrument relative to flow type heat capacity calorimeters are that measurements can be made at orders of magnitude lower concentrations and that measurement of heat of reaction involving solids or gases or in the presence of high concentrations of supporting electrolytes, acids, and bases is possible. Furthermore, the advantage of using enthalpy data over heat capacity data for calculations of the standard state Gibbs free energies of electrolytes is that the experimental heat data of this research need only be integrated once to derive higher temperature free energy data from lower temperatures. The derived heat capacities can be used mathematically to obtain free energies by double integration. However, the resulting errors are much smaller than if experimental aqueous heat capacities were used for the integrations.

  17. Effect of Metallic Film in Diamond Growth from an Fe-Ni-C System at High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    许斌; 李木森; 尹龙卫; 崔建军; 宫建红

    2003-01-01

    The metallic film surrounding a diamond single crystal, which plays an important role in the diamond growth from an Fe-Ni-C system, has been successfully investigated by using transmission-electron microscopy (TEM),Raman spectroscopy and x-ray photo-electron spectroscopy (XPS). Diamond and graphite were not found in surface layer (near diamond) of the film by TEM and Raman spectroscopy, but a parallel relationship exists between the (111) plane of γ-(Fe,Ni) and the (100) plane of (Fe, Ni)3C in this region. Compared with that of solvent metal (catalyst) near diamond, the binding energy in the valence bands of iron, nickel and carbon atoms of the film has an increase of 0.9 eV. According to the microstructures on the film obtained by the TEM, Raman spectra, and XPS, the catalytic mechanism of the film may be assumed as follows. In the surface layer of the film,iron and nickel atoms in the γ-(Fe, Ni) lattice can absorb carbon atoms in the (Fe, Ni)3C lattice and make them transform to an sp3-like state. Then carbon atoms with the sp3-like structure are separated from the (Fe,Ni)3C and stack on the growing diamond crystal. This study provides a direct evidence for the diamond growth from a metallic catalyst-graphite system under high temperature and high pressure.

  18. Dome-shaped magnetic order competing with high-temperature superconductivity at high pressures in FeSe.

    Science.gov (United States)

    Sun, J P; Matsuura, K; Ye, G Z; Mizukami, Y; Shimozawa, M; Matsubayashi, K; Yamashita, M; Watashige, T; Kasahara, S; Matsuda, Y; Yan, J-Q; Sales, B C; Uwatoko, Y; Cheng, J-G; Shibauchi, T

    2016-07-19

    The coexistence and competition between superconductivity and electronic orders, such as spin or charge density waves, have been a central issue in high transition-temperature (Tc) superconductors. Unlike other iron-based superconductors, FeSe exhibits nematic ordering without magnetism whose relationship with its superconductivity remains unclear. Moreover, a pressure-induced fourfold increase of Tc has been reported, which poses a profound mystery. Here we report high-pressure magnetotransport measurements in FeSe up to ∼15 GPa, which uncover the dome shape of magnetic phase superseding the nematic order. Above ∼6 GPa the sudden enhancement of superconductivity (Tc≤38.3 K) accompanies a suppression of magnetic order, demonstrating their competing nature with very similar energy scales. Above the magnetic dome, we find anomalous transport properties suggesting a possible pseudogap formation, whereas linear-in-temperature resistivity is observed in the normal states of the high-Tc phase above 6 GPa. The obtained phase diagram highlights unique features of FeSe among iron-based superconductors, but bears some resemblance to that of high-Tc cuprates.

  19. High Temperature, High Pressure Equation of State: Solidification of Hydrocarbons and Measurement of Krytox Oil Using Rolling-Ball Viscometer Validation

    Energy Technology Data Exchange (ETDEWEB)

    Gamwo, Isaac K. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Burgess, Ward [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Tapriyal, Deepak [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2014-10-03

    The global consumption of oil and gas continues to rise and has led to the search and recovery of petroleum sources from reservoirs exhibiting increasingly high-temperature, high-pressure conditions. For example, ultra-deep petroleum formations found at depths of approximately 5 km or more, can exhibit pressure and temperature values as high as 240 MPa (35,000 psi) and 533 K (260°C). The hydrocarbons produced from these ultra-deep formations experience significant decreases in temperature and pressure from reservoir to platform conditions. Hence, it is highly desirable to develop accurate equation of state models (EOS) and fluid properties databases that covers the entire temperature and pressure ranges associated with this process to promote the efficient, safe, and environmentally responsible production from these reservoirs at extreme conditions. Currently available databases and EOS models are generally limited to approximately 69 MPa and do not correlate accurately when extrapolated to the extreme environments associated with ultra-deep reservoirs where temperatures can reach as high as 533 K and pressures up to 240 MPa. Despite recent exploration and production of petroleum from ultra-deep formations, there are major gaps in the databases for pure and mixture density and viscosity of hydrocarbons. These are the most important fluid properties that enable accurate booking of reserves as well as the design of size and equipment to safely bring these fluids to the platform. The overall objective of this project is to develop methodologies to provide crude oil thermodynamic and transport properties—including density, viscosity, and phase composition— at extreme temperature and pressure conditions. The knowledge of these crude oil properties reduces uncertainties associated with deep drilling and promotes safer and reliable access to domestic energy resources. This report is an extension of work reported in our first Technical Report Series (TRS) released

  20. Combined high-pressure and high-temperature vibrational studies of dolomite: phase diagram and evidence of a new distorted modification

    Science.gov (United States)

    Efthimiopoulos, I.; Jahn, S.; Kuras, A.; Schade, U.; Koch-Müller, M.

    2017-02-01

    A combined high-pressure mid-infrared absorption and Raman spectroscopy study on a natural CaMg0.98Fe0.02(CO3)2 dolomite sample was performed both at ambient and high temperatures. A pressure-temperature phase diagram was constructed for all the reported dolomite ambient- and high-pressure polymorphs. In addition, a local distortion of the ambient-pressure dolomite structure was identified close to 11 GPa, just before the transition toward the first known high-pressure phase. All the Clausius-Clapeyron slopes are found to be positive with similar magnitudes. Complementary first-principles calculations suggest a metastable nature of the high-pressure dolomite polymorphs. Finally, theoretical spectroscopy is used to interpret and discuss the observed changes in the measured vibrational spectra.

  1. High-Temperature and High-Pressure Pyrolysis of Hexadecane: Molecular Dynamic Simulation Based on Reactive Force Field (ReaxFF).

    Science.gov (United States)

    Chen, Zhuojun; Sun, Weizhen; Zhao, Ling

    2017-03-07

    As important products of heavy oil pyrolysis, heavier components such as gasoline and diesel supply the vast majority of energy demand through combustion, and lighter components such as ethylene and propylene are the main sources of industrial chemicals and plastic products. In this work, pyrolysis of hexadecane, as the model compound, was studied by reactive force field (ReaxFF) molecular simulation at high temperatures and high pressures. It was confirmed by unimolecular simulations that there exist eight different initial mechanisms all starting with C-C bond dissociation. The biradical mechanism was verified, through which the pyrolysis process can be accomplished within a shorter time. The enthalpy of reaction was calculated by the QM method, which was well consistent with ReaxFF calculation results. Multimolecular simulations showed that there is a strong dependency relationship between products distribution and temperature, as well as that between reaction rates and temperature. The optimal condition for ethylene formation in our work is 11.6 MPa and 2000 K, whereas it is best for hydrogen formation at conditions of 11.6 MPa and 3500 K. Kinetic analysis was performed with the activation energy of 113.03 kJ/mol and pre-exponential factor of 4.55 × 10(12), and it is in good agreement with previous work.

  2. Enhancement of yield point at high pressure high temperature wells by using polymer nanocomposites based on ZnO & CaCO3 nanoparticles

    Directory of Open Access Journals (Sweden)

    A.Z. Noah

    2017-03-01

    Full Text Available Zinc oxide nanoparticles (ZnO-NPs and modified calcium carbonate (nano-CaCO3 nanoparticles were successfully prepared and added to polystyrene-butadiene rubber copolymer (PSBR matrix to prepare PSBR nanocomposites. The prepared nanomaterials (ZnO-NPs & nano-CaCO3 were characterized using scanning electron microscope (SEM, transmission electron microscope (TEM and X-ray diffraction (XRD. Furthermore, the prepared polymer nanocomposites and oil base mud were used for drilling in high pressure high temperature (HPHT wells. The consequence of using polymer nanocomposites based on different loading of ZnO-NPs and nano-CaCO3 on the rheological properties of oil base mud was evaluated and enhanced the yield point at high pressure high temperature wells (HPHT. The using of the polymer with different percentage from (0.5 in all percent the obtained results is very promising; this means that the increase of polymer is reasonable for the increase of apparent viscosity, plastic viscosity and yield point at high temperature. Correspondingly, polymer nanocomposites displayed rise of apparent viscosity, plastic viscosity, and yield point, decreased in fluid loss and increased in electrical stability at high pressure high temperature wells.

  3. Oxygen as a promoter for efficient degradation of organic pollutants by high-temperature and high-pressure electrochemistry.

    Science.gov (United States)

    Zhou, Minghua; Lei, Lecheng; Dai, Qizhou

    2007-07-07

    The introduction of oxygen in electrochemical oxidation at relatively high temperature and pressure as a promoter resulting in synergetic effects, greatly improves the mineralization of high-concentrated organic pollutants.

  4. Optical fiber chemical sensors with sol-gel derived nanomaterials for monitoring high temperature/high pressure reactions in clean energy technologies

    Science.gov (United States)

    Tao, Shiquan

    2010-04-01

    The development of sensor technologies for in situ, real time monitoring the high temperature/high pressure (HTP) chemical processes used in clean energy technologies is a tough challenge, due to the HTP, high dust and corrosive chemical environment of the reaction systems. A silica optical fiber is corrosive resistance, and can work in HTP conditions. This paper presents our effort in developing fiber optic sensors for in situ, real time monitoring the concentration of trace ammonia and hydrogen in high temperature gas samples. Preliminary test results illustrate the feasibility of using fiber optic sensor technologies for monitoring HTP processes for next generation energy industry.

  5. Alkyne-azide cycloadditions with copper powder in a high-pressure continuous-flow reactor: high-temperature conditions versus the role of additives.

    Science.gov (United States)

    Ötvös, Sándor B; Mándity, István M; Kiss, Lóránd; Fülöp, Ferenc

    2013-04-01

    A safe and efficient flow-chemistry-based procedure is presented for 1,3-dipolar cycloaddition reactions between organic azides and acetylenes. This simple and inexpensive technique eliminates the need for costly special apparatus and utilizes Cu powder as a plausible Cu(I) source. To maximize the reaction rates, high-pressure/high-temperature conditions are utilized; alternatively, the harsh reaction conditions can be moderated at room temperature by the joint application of basic and acidic additives. A comparison of the performance of these two approaches in a series of model reactions has resulted in the formation of useful 1,4-disubstituted 1,2,3-triazoles in excellent yields. The risks that are associated with the handling of azides are lowered, thanks to the benefits of flow processing, and gram-scale production has been safely implemented. The synthetic capability of this continuous-flow technique is demonstrated by the efficient syntheses of some highly functionalized derivatives of the antifungal cispentacin. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  6. XPS analysis for cubic boron nitride crystal synthesized under high pressure and high temperature using Li{sub 3}N as catalysis

    Energy Technology Data Exchange (ETDEWEB)

    Guo, Xiaofei [School of Materials Science and Engineering, Shandong Jianzhu University, Ji’nan 250101 (China); School of Materials Science and Engineering, Shandong University, Ji’nan 250061 (China); Xu, Bin, E-mail: xubin@sdjzu.edu.cn [School of Materials Science and Engineering, Shandong Jianzhu University, Ji’nan 250101 (China); Zhang, Wen [School of Materials Science and Engineering, Shandong Jianzhu University, Ji’nan 250101 (China); Cai, Zhichao [School of Materials Science and Engineering, Shandong University, Ji’nan 250061 (China); Wen, Zhenxing [School of Materials Science and Engineering, Shandong Jianzhu University, Ji’nan 250101 (China)

    2014-12-01

    Highlights: • The cBN was synthesized by Li{sub 3}N as catalyst under high pressure and high temperature (HPHT). • The film coated on the as-grown cBN crystals was studied by XPS. • The electronic structure variation in the film was investigated. • The growth mechanism of cubic boron nitride crystal was analyzed briefly. - Abstract: Cubic boron nitride (cBN) single crystals are synthesized with lithium nitride (Li3N) as catalyst under high pressure and high temperature. The variation of electronic structures from boron nitride of different layers in coating film on the cBN single crystal has been investigated by X-ray photoelectron spectroscopy. Combining the atomic concentration analysis, it was shown that from the film/cBN crystal interface to the inner, the sp{sup 2} fractions are decreasing, and the sp{sup 3} fractions are increasing in the film at the same time. Moreover, by transmission electron microscopy, a lot of cBN microparticles are found in the interface. For there is no Li{sub 3}N in the film, it is possible that Li{sub 3}N first reacts with hexagonal boron nitride to produce Li{sub 3}BN{sub 2} during cBN crystals synthesis under high pressure and high temperature (HPHT). Boron and nitrogen atoms, required for cBN crystals growth, could come from the direct conversion from hexagonal boron nitride with the catalysis of Li{sub 3}BN{sub 2} under high pressure and high temperature, but not directly from the decomposition of Li{sub 3}BN{sub 2}.

  7. Study of a high-temperature and high-pressure FBG sensor with Al2O3 thin-wall tube substrate

    Institute of Scientific and Technical Information of China (English)

    ZHOU Hong; QIAO Xue-guang; WANG Hong-liang; FENG De-quan; WANG Wei

    2008-01-01

    A fiber Bragg grating (FBG) high-temperature and high pressure sensor has been designed and fabricated by using the Al2O3 thin-wall tube as a substrate. The test results show that the sensor can withstand a pressure range of 0-45 MPa and a temperature range of-10-300℃, and has a pressure sensitivity of 0.0426 nm/MPa and a temperature sensitivity of 0.0112nm/℃

  8. High-pressure high-temperature experiments: Windows to the Universe; Experimentos a alta presion y alta temperatura: Ventanas al universo

    Energy Technology Data Exchange (ETDEWEB)

    Santaria-Perez, D.

    2011-07-01

    From Earth compositional arguments suggested by indirect methods, such as the propagation of seismic waves, is possible to generate in the laboratory pressure and temperature conditions similar to those of the Earth or other planet interiors and to study how these conditions affect to a certain metal or mineral. These experiments are, therefore, windows to the Universe. The aim of this chapter is to illustrate the huge power of the experimental high-pressure high-temperature techniques and give a global overview of their application to different geophysical fields. Finally, we will introduce the MALTA Consolider Team, which gather most of the Spanish high-pressure community, and present their available high-pressure facilities. (Author) 28 refs.

  9. High-Pressure-High-Temperature Processing Reduces Maillard Reaction and Viscosity in Whey Protein-Sugar Solutions

    NARCIS (Netherlands)

    Avila Ruiz, Geraldine; Xi, Bingyan; Minor, Marcel; Sala, Guido; Boekel, van Tiny; Fogliano, Vincenzo; Stieger, Markus

    2016-01-01

    The aim of the study was to determine the influence of pressure in high-pressure–high-temperature (HPHT) processing on Maillard reactions and protein aggregation of whey protein–sugar solutions. Solutions of whey protein isolate containing either glucose or trehalose at pH 6, 7, and 9 were treated

  10. Effect of Chromium on Corrosion Behavior of P110 Steels in CO2-H2S Environment with High Pressure and High Temperature

    Directory of Open Access Journals (Sweden)

    Jianbo Sun

    2016-03-01

    Full Text Available The novel Cr-containing low alloy steels have exhibited good corrosion resistance in CO2 environment, mainly owing to the formation of Cr-enriched corrosion film. In order to evaluate whether it is applicable to the CO2 and H2S coexistence conditions, the corrosion behavior of low-chromium steels in CO2-H2S environment with high pressure and high temperature was investigated using weight loss measurement and surface characterization. The results showed that P110 steel suffered localized corrosion and both 3Cr-P110 and 5Cr-P110 steels exhibited general corrosion. However, the corrosion rate of 5Cr-P110 was the highest among them. The corrosion process of the steels was simultaneously governed by CO2 and H2S. The outer scales on the three steels mainly consisted of FeS1−x crystals, whereas the inner scales on Cr-containing steels comprised of amorphous FeS1−x, Cr(OH3 and FeCO3, in contrast with the amorphous FeS1−x and FeCO3 mixture film of P110 steel. The more chromium the steel contains, the more chromium compounds the corrosion products contain. The addition of chromium in steels increases the uniformity of the Cr-enriched corrosion scales, eliminates the localized corrosion, but cannot decrease the general corrosion rates. The formation of FeS1−x may interfere with Cr-enriched corrosion scales and lowering the corrosion performance of 3Cr-P110 and 5Cr-P110 steels.

  11. A diamond anvil cell for x-ray fluorescence measurements of trace elements in fluids at high pressure and high temperature.

    Science.gov (United States)

    Petitgirard, Sylvain; Daniel, Isabelle; Dabin, Yves; Cardon, Hervé; Tucoulou, Rémi; Susini, Jean

    2009-03-01

    We present a new diamond anvil cell (DAC), hereafter called the fluoX DAC, dedicated for x-ray fluorescence (XRF) analysis of trace elements in fluids under high pressure and high temperature to 10 GPa and 1273 K at least. This new setup has allowed measurement of Rb, Sr, Y, Zr, with concentrations of 50 ppm to 5.6 GPa and 1273 K. The characteristics of the fluoX DAC consist in an optimized shielding and collection geometry in order to reduce the background level in XRF spectrum. Consequently, minimum detection limits of 0.3 ppm were calculated for the abovementioned elements in this new setup. This new DAC setup coupled to the hard x-rays focusing beamline ID22 (ESRF, France) offers the possibility to analyze in situ at high pressure and high temperature, ppm level concentrations of heavy elements, rare earth elements, and first transition metals, which are of prime importance in geochemical processes. The fluoX DAC is also suitable to x-ray diffraction over the same high pressure-temperature range.

  12. Stability of rhombohedral phases in vanadium at high-pressure and high-temperature: first-principles investigations

    CERN Document Server

    Wang, Yi X; Chen, Xiang R; Geng, Hua Y

    2016-01-01

    The pressure-induced transition of vanadium from BCC to rhombohedral structures is unique and intriguing among transition metals. In this work, the stability of these phases is revisited by using density functional theory. At finite temperatures, a novel transition of rhombohedral phases back to BCC phase induced by thermal electrons is discovered. This reentrant transition is found not driven by phonons, instead it is the electronic entropy that stabilizes the latter phase, which is totally out of expectation. Parallel to this transition, we find a peculiar and strong increase of the shear modulus C44 with increasing temperature. It is counter-intuitive in the sense that it suggests an unusual harding mechanism of vanadium by temperature. With these stability analyses, the high-pressure and finite-temperature phase diagram of vanadium is proposed. Furthermore, the dependence of the stability of RH phases on the Fermi energy and chemical environment is investigated. The results demonstrate that the position o...

  13. The influence of high pressure and high temperature on the structure of ZrO sub 2 nanosolids

    CERN Document Server

    Xu Da Peng; LiuShue; Wang Quan Yong; Su Wen Hui

    2002-01-01

    Using nanoparticles of ZrO sub 2 (disordered structure) prepared by the method of precipitation as starting materials, ZrO sub 2 nanosolids have been synthesized under different pressures and at different temperatures. The x-ray diffraction results show that the crystallization temperature of the nanoparticles and the temperature at which the structural cubic-monoclinic transformation occurs are obviously reduced for the nanosolids synthesized under high pressure. X-ray photoelectron spectroscopy and EPR measurements indicate that there are some Zr sup 3 sup + ions in nanosolids. With increasing pressure, the number of Zr sup 3 sup + ions in the nanosolids essentially does not vary, and yet the content of oxygen ions with unsaturated bonds and dangling bonds in the interfacial region gradually decreases. The effect of synthesis pressure on the structure and interface states is mainly due to the decrease of the interatomic distance and the increasing interdiffusion of atoms in the interface phase.

  14. 高温、高压、临氢在用压力容器 的氢腐蚀检验%HYDROGEN ATTACK INSPECTION ON HIGH PRESSURE VESSEL IN SERVICE UNDER HIGH TEMPERATURE,HIGH PRESSURE AND HYDROGEN ENVIROMENT

    Institute of Scientific and Technical Information of China (English)

    乔学福

    2001-01-01

    The material property of pressure vessel in high temperature,high pressure and hydrogen service can be clanged chaused by hydrogen attack.In combination with the main material inspection of 123-c heat exchanger in synthetic ammonia unit put into production for more than 20 years,the key paints and mehtod of inspecton on pressure vessel in service under high temperature,high pressure and hydrogen serice are mentioned,the mechanisum of hydrogen attack is analyzed.The determination of safety grade for hydrogen attacked pressure vessel in serice is given by the author with personal viewpoint.%高温、高压、临氢压力容器,由于氢的腐蚀其材质的性能会发生变化。作者结合对投用20多年的合成氨装置123—C换热器主体材质的检验,阐述了高温、高压、临氢在用压力容器的检验要点和方法,分析了氢腐蚀产生的机理,对已发生了氢腐蚀的在用压力容器的安全等级判定提出了个人的看法。

  15. Fine Structural and Carbon Source Analysis for Diamond Crystal Growth using an Fe-Ni-C System at High Pressure and High Temperature

    Institute of Scientific and Technical Information of China (English)

    FAN Xiao-Hong; XU Bin; NIU Zhen; ZHAI Tong-Guang; TIAN Bin

    2012-01-01

    Diamond is synthesized in an Fe-Ni-C system at high pressure and high temperature,the C sp3 content profile through different thicknesses of interface between diamond and the catalyst film is measured by using electron energy loss spectroscopy.It is found that the Csp3 content varies from 87.33% to 78.15% when the measured position is located at the inner face near the diamond and then changes to 6 μm further away.Transmission electron microscope examinations show that there are different phases in the interface,such as Fe3C,γ-(Fe,Ni),and graphite,but the graphite phase diminishes gradually towards the inner face of the interface.These results profoundly indicate that the carbon atoms,required for diamond growth,could only come from the carbon-rich phase,Fe3C,but not directly from the graphite.It is possible that carbon atoms from the graphite in the interface first react with Fe atoms to produce carbide Fe3 C during diamond synthesis at high pressure and high temperature.The Fe3 C finally decomposes into carbon atoms with the sp3 electron state at the interface to form the diamond.%Diamond is synthesized in an Fe-Ni-C system at high pressure and high temperature, the Csp3 content profile through different thicknesses of interface between diamond and the catalyst film is measured by using electron energy loss spectroscopy. It is found that the Csp3 content varies from 87.33% to 78.15% when the measured position is located at the inner face near the diamond and then changes to 6μm further away. Transmission electron microscope examinations show that there are different phases in the interface, such as Fe3 C1 γ-(Fe,Ni), and graphite, but the graphite phase diminishes gradually towards the inner face of the interface. These results profoundly indicate that the carbon atoms, required for diamond growth, could only come from the carbon-rich phase, Fe3C, but not directly from the graphite. It is possible that carbon atoms from the graphite in the interface first

  16. A Flow-Through High-Pressure Electrical Conductance Cell for Determining of Ion Association of Aqueous Electrolyte Solutions at High Temperature and Pressure

    Energy Technology Data Exchange (ETDEWEB)

    Bianchi, H.; Ho, P.C.; Palmer, D.A.; Wood, R.H.

    1999-09-12

    A flow-through high-pressure electrical conductance cell was designed and constructed to measure limiting molar conductances and ion association constants of dilute aqueous solutions with high precision at high temperatures and pressures. The basic concept of the cell employs the principle developed at the University of Delaware in 1995, but overall targets higher temperatures (to 600 C) and pressures (to 300 MPa). At present the cell has been tested by measuring aqueous NaCl and LiOH solutions (10{sup {minus}3} to 10{sup {minus}5} mol.kg{sup {minus}1}) to 405 C and 33 MPa with good results.

  17. P-wave velocities of main upper mantle minerals at high temperature and high pressure and its geological implication

    Institute of Scientific and Technical Information of China (English)

    宋茂双; 谢鸿森; 郑海飞; 徐有生; 郭捷; 许祖鸣

    1996-01-01

    At 0 - 5.0GPa and room temperature to 1400℃, the P-wave velocities of olivine, clinopyroxene and orthopyroxene, which are three common minerals from upper mantle, are measured under both simulated oceanic and continental geothermal gradients. The experimental results indicate that the P-wave velocities of these minerals increase with depth under both geothermal gradients. This implicates that pressure is more important than temperature in deep earth in controlling the P-wave velocities of mantle minerals, but the increase of temperature has greater effect on P-wave velocities of main mantle minerals at greater depth than at smaller depth. At low pressure, the measured P-wave velocities of mantle minerals are smaller than their true values due to fracturing, compaction process and recrystallization of mineral powder. The true P-wave velocities of mantle minerals can be obtained at lower pressure by the extrapolation of measured velocities at a high pressure. At higher depth, all these three minerals sho

  18. Optimized High Temperature PEM Fuel Cell & High Pressure PEM Electrolyser for Regenerative Fuel Cell Systems in GEO Telecommunication Satellites

    Directory of Open Access Journals (Sweden)

    Farnes Jarle

    2017-01-01

    Full Text Available Next generation telecommunication satellites will demand increasingly more power. Power levels up to 50 kW are foreseen for the next decades. Battery technology that can sustain up to 50 kW for eclipse lengths of up to 72 minutes will represent a major impact on the total mass of the satellite, even with new Li-ion battery technologies. Regenerative fuel cell systems (RFCS were identified years ago as a possible alternative to rechargeable batteries. CMR Prototech has investigated this technology in a series of projects initiated by ESA focusing on both the essential fuel cell technology, demonstration of cycle performance of a RFCS, corresponding to 15 years in orbit, as well as the very important reactants storage systems. In the last two years the development has been focused towards optimising the key elements of the RFCS; the HTPEM fuel cell and the High Pressure PEM electrolyser. In these ESA activities the main target has been to optimise the design by reducing the mass and at the same time improve the performance, thus increasing the specific energy. This paper will present the latest development, including the main results, showing that significant steps have been taken to increase TRL on these key components.

  19. Stability of rhombohedral phases in vanadium at high-pressure and high-temperature: first-principles investigations

    Science.gov (United States)

    Wang, Yi X.; Wu, Q.; Chen, Xiang R.; Geng, Hua Y.

    2016-09-01

    The pressure-induced transition of vanadium from BCC to rhombohedral structures is unique and intriguing among transition metals. In this work, the stability of these phases is revisited by using density functional theory. At finite temperatures, a novel transition of rhombohedral phases back to BCC phase induced by thermal electrons is discovered. This reentrant transition is found not driven by phonons, instead it is the electronic entropy that stabilizes the latter phase, which is totally out of expectation. Parallel to this transition, we find a peculiar and strong increase of the shear modulus C44 with increasing temperature. It is counter-intuitive in the sense that it suggests an unusual harding mechanism of vanadium by temperature. With these stability analyses, the high-pressure and finite-temperature phase diagram of vanadium is proposed. Furthermore, the dependence of the stability of RH phases on the Fermi energy and chemical environment is investigated. The results demonstrate that the position of the Fermi level has a significant impact on the phase stability, and follows the band-filling argument. Besides the Fermi surface nesting, we find that the localization/delocalization of the d orbitals also contributes to the instability of rhombohedral distortions in vanadium.

  20. Growth and annealing study of hydrogen-doped single diamond crystals under high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    Li Yong; Jia Xiao-Peng; Hu Mei-Hua; Liu Xiao-Bing; Yan Bing-Min; Zhou Zhen-Xiang; Zhang Zhuang-Fei; Ma Hong-An

    2012-01-01

    A series of diamond crystals doped with hydrogen is successfully synthesized using LiH as the hydrogen source in a catalyst-carbon system at a pressure of 6.0 GPa and temperature ranging from 1255 ℃ to 1350 ℃.It is shown that the high temperature plays a key role in the incorporation of hydrogen atoms during diamond crystallization.Fourier transform infrared micro-spectroscopy reveals that most of the hydrogen atoms in the synthesized diamond are incorporated into the crystal structure as sp3-CH2-symmetric(2850 cm-1)and sp3 CH2-antisymmetric vibrations(2920 cm-1).The intensities of these peaks increase gradually with an increase in the content of the hydrogen source in the catalyst.The incorporation of hydrogen impurity leads to a significant shift towards higher frequencies of the Raman peak from 1332.06 cm-1 to 1333.05 cm-1 and gives rise to some compressive stress in the diamond crystal lattice.Furthermore,hydrogen to carbon bonds are evident in the annealed diamond,indicating that the bonds that remain throughout the annealing process and the vibration frequencies centred at 2850 and 2920 cm-1 have no observable shift.Therefore,we suggest that the spa C-H bond is rather stable in diamond crystals.

  1. High-Pressure and High-Temperature in situ X-Ray Diffraction Study of FeP2 up to 70GPa

    Institute of Scientific and Technical Information of China (English)

    GU Ting-Ting; WU Xiang; QIN Shan; LIU Jing; LI Yan-Chun; ZHANG Yu-Feng

    2012-01-01

    The high-pressure and high-temperature structural behavior of FeP2 is investigated by means of synchrotron x-ray powder diffraction combined with a laser heating technique up to 70GPa and at least 1800K.No phase transition of FeP2 occurs up to 68GPa at room temperature.While a new phase of FeP2 assigned to the CuAl2-type structure (14/mcm,Z =4) is observed at 70GPa after laser-heating.This new phase presents a quenchable property on decompression to ambient conditions.Our results update previous experimental data and are consistent with theoretical studies.%The high-pressure and high-temperature structural behavior of FeP2 is investigated by means of synchrotron x-ray powder diffraction combined with a laser heating technique up to 70GPa and at least 1800 K. No phase transition of FeP2 occurs up to 68GPa at room temperature. While a new phase of FeP2 assigned to the CuAh-type structure (I4/mcm, Z = 4) is observed at 70GPa after laser-heating. This new phase presents a quenchable property on decompression to ambient conditions. Our results update previous experimental data and are consistent with theoretical studies.

  2. High-pressure / High-temperature studies on the stannides RENiSn (RE = Ce, Pr, Nd, Sm) and REPdSn (RE = La, Pr, Nd)

    Energy Technology Data Exchange (ETDEWEB)

    Riecken, J.F.; Hermes, W.; Rodewald, U.C.; Hoffmann, R.D.; Poettgen, R. [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Heymann, G.; Huppertz, H. [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie

    2008-06-15

    The normal-pressure (NP) orthorhombic TiNiSi-type (space group Pnma) stannides RENiSn (RE = Ce, Pr, Nd, Sm) and REPdSn (RE = La, Pr, Nd) were transformed into the corresponding hexagonal ZrNiAl-type (space group P anti 62m) high-pressure (HP) modifications under multianvil high-pressure (7.5 - 11.5 GPa) high-temperature (1100 - 1200 C) conditions. The structures of NP-CeNiSn, HP-PrNiSn, NP-NdNiSn, HP-LaPdSn, HP-PrPdSn, and HP-NdPdSn were refined from single crystal X-ray diffractometer data. Structural data for HP-SmNiSn were obtained from a Rietveld powder refinement. The high-pressure phase transition significantly changes the rare earth coordination, i. e. 4 RE + 6 Ni(Pd) + 6 Sn atoms for the NP-phases and 6 RE + 5 Ni(Pd) + 6 Sn atoms for the HP-phases. Susceptibility measurements of HP-PrPdSn and HP-NdPdSn reveal paramagnetic behavior with experimental magnetic moments of 3.61(1) {mu}{sub B}/Pr atom and 3.66(1) {mu}{sub B}/Nd atom, respectively. Low-temperature susceptibility and specific heat data point to inhomogeneous magnetism and spin-glass behavior, respectively. (orig.)

  3. The experimental studies on electrical conductivities and P-wave velocities of anorthosite at high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    白利平; 杜建国; 刘巍; 周文戈

    2002-01-01

    Results of P-wave velocity (vP) and electrical conductivity measurements on anorthosite are presented from room temperature to 880 (C at 1.0 GPa using ultrasonic transmission technique and impedance spectra technique respectively. The experiments show that the P-wave velocities in anorthosite decrease markedly above 680 (C following the dehydration of hydrous minerals in the rock, and the complex impedances collected from 12 Hz to 105 Hz only indicate the grain interior conduction mechanism at 1.0 GPa, from 410 (C to 750 (C. Because the fluids in the rock have not formed an interconnected network, the dehydration will not pronouncedly enhance the electrical conductivity and change the electrical conduction mechanism. It is concluded that the formation and evolution of the low-velocity zones and high-conductivity layers in the crust may have no correlations, and the dehydration can result in the formation of the low-velocity zones, but cannot simultaneously result in the high-conductivity layers.

  4. Genesis of granulite in Himalayan lower crust: Evidence from experimental study at high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Here we present an insight into the genesis of Himalayan granulitic lower crust based on the experimental studies on the dehydration melting of natural biotiteplagioclase gneiss performed at the temperatures of 770-980℃ and the pressures of 1.0-1.4 GPa. The experiments produce peraluminous granitic melt and residual phase assemblage (Pl+Qz+Gat+Bio+Opx±Cpx+Ilm/Rut±Kfs). The residual mineral assemblage is similar to those of granulites observed at the eastern and western Himalayan syntaxises, and the chemical compositions of characteristic minerals-garnet and pyroxene in the residual phase and the granulite are identical. Additionally, the modeled wave velocities of the residual phase assemblage are comparable well with those of the top part of lower crust beneath Himalayas.Hence, we suggest that (1) the top part of lower crust beneath Himalayas is probably made up of garnet-bearing intermediate granulite; (2) the formations of granulite and leucogranites in Himalayas are interrelated as the results of crustal anatexis; and (3) dehydration melting of biotite-plagioclase gneiss is an important process to form granulitic lower crust, to reconstitute and adjust the crustal texture. Moreover, experimental results can provide constraints on determining the P-T conditions of Himalayan crustal anatexis.

  5. On dislocation glide in MgSiO3 bridgmanite at high-pressure and high-temperature

    Science.gov (United States)

    Kraych, Antoine; Carrez, Philippe; Cordier, Patrick

    2016-10-01

    Dislocation glide in MgSiO3 bridgmanite with Pbnm perovskite structure is modeled at 30 and 60 GPa for the [100](010) and [010](100) slip systems. The velocity of screw dislocations is calculated in the thermally activated regime based on the kink-pair mechanism. We show that the dislocation velocity determination can rely on the atomic scale calculations of a limited amount of parameters: the Peierls stress τp, and the formation enthalpy of a single kink Hk. From the dislocation velocities, the evolution of stress as a function of temperature can be derived from the Orowan equation at any strain rate. Calculations performed at laboratory strain-rates of 10-5 s-1 reproduce well the high stress levels found experimentally. This demonstrates the influence of lattice friction in the mechanical properties of bridgmanite. The same calculations are performed at mantle strain-rate (10-16 s-1). They demonstrate that in the lower mantle, bridgmanite would always be in the thermally activated regime and that stresses close to 1 GPa are still necessary to move dislocations in bridgmanite. In the uppermost lower mantle, dislocation glide is inhibited and other deformation mechanisms, involving diffusion, are needed.

  6. The influence of boron on the crystal structure and properties of mullite. Investigations at ambient, high-pressure, and high-temperature conditions

    Energy Technology Data Exchange (ETDEWEB)

    Luehrs, Hanna

    2013-11-21

    Mullite is one of the most important synthetic compounds for advanced structural and functional ceramic materials. The crystal structure of mullite with the composition Al{sub 2}[Al{sub 2+2x}Si{sub 2-2x}]O{sub 10-x} can incorporate a large variety of foreign cations, including (amongst others) significant amounts of boron. However, no chemical or crystal structure analyses of boron-mullites (B-mullites) were available prior to this work, thus representing the key aspects of this thesis. Furthermore, the influence of boron on selected properties of mullite under ambient, high-temperature, and high-pressure conditions are addressed. Starting from a 3:2 mullite composition (Al{sub 4.5}Si{sub 1.5}O{sub 9.75}), the initial hypothesis for this study was a 1:1 isomorphous replacement of silicon by boron according to the coupled substitution mechanism: 2 Si{sup 4+} + O{sup 2-} → 2 B{sup 3+} + □. Based on a series of compounds synthesized from sol-gel derived precursors at ambient pressure and 1200 C, the formation conditions and physical properties of B-mullites were investigated. The formation temperature for B-mullites decreases with increasing boron-content, as revealed by thermal analyses. An anisotropic development of lattice parameters is observed: Whereas lattice parameters a and b only exhibit minor changes, a linear relationship between lattice parameter c and the amount of boron in the crystal structure was established, on the basis of prompt gamma activation analyses (PGAA) and Rietveld refinements. According to this relationship about 15% of the silicon in mullite can be replaced by boron yielding single-phase B-mullite. B-mullites with significantly higher (∝ factor 3) boron-contents in the mullite structure were also observed but the respective samples contain alumina impurities. Fundamental new details regarding the response of B-mullite to high-temperature and highpressure are presented in this thesis. On the one hand, long-term thermal stability at

  7. Development of Zr/ZrO2 high temperature and high pressure sensors for in-situ measuring chemical parameters of deep-sea water

    Institute of Scientific and Technical Information of China (English)

    ZHANG XueTong; ZHANG RongHua; HU ShuMin; WANG Yong

    2009-01-01

    In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR),it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2,dissolved H2S)of deep-sea water and hydrothermal fluids in a wide temperature range(2℃-400℃)at MOR vents.The YSZ(Yttria Stabilized Zirconia,9%Y2O3)ceramic-based(HgO/Hg)chemical sensors possess excellent electrochemical properties at high temperatures,which have been used to measure chemical parameters of hydrothermsl fluids above 200℃.A novel Zr/ZrO2 oxidation/reduction electrode was constructed by oxidation of Zr wire in Na2CO3 melt.This Zr/ZrO2 electrode has good chemical stability while measuring pH of high-temperature aqueous solutions,combined with a Ag/AgCl reference electrode.Potentials of the Zr/ZrO2 sensor in association with a Ag/AgCl reference electrode vary linearly with pH over a wide pH range,as tested by various NaCI-HCI-H2O solutions(NaOH-NaCI-H2O for basic solutions),at temperatures in the range of 20℃-200℃.Thus,the Zr/ZrO2 sensors can be utilized in monitoring the fluids over the temperature range of 2℃-200℃.The Zr/ZrO2 electrode combined with Ag/AgCI,Ag/Ag2S,and Au electrodes has been used to measure pH and other chemical parameters (dissolved H2,dissolved H2S)of aqueous fluids from low to high temperatures and high pressures in the laboratory and to monitor those parameters of deep-sea water in South China Sea.

  8. Development of Zr/ZrO2 high temperature and high pressure sensors for in-situ measuring chemical parameters of deep-sea water

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In order to in situ measure chemical parameters of deep-sea water and hydrothermal fluids at midocean ridge(MOR), it is necessary to use high temperature and high pressure chemical sensors.Developing new sensors is essential to measure in-situ pH and other chemical parameters(dissolved H2, dissolved H2S) of deep-sea water and hydrothermal fluids in a wide temperature range(2℃―400℃) at MOR vents.The YSZ(Yttria Stabilized Zirconia, 9%Y2O3) ceramic-based(HgO/Hg) chemical sensors possess excellent electrochemical properties at high temperatures, which have been used to measure chemical parameters of hydrothermal fluids above 200℃.A novel Zr/ZrO2 oxidation/reduction electrode was constructed by oxidation of Zr wire in Na2CO3 melt.This Zr/ZrO2 electrode has good chemical stability while measuring pH of high-temperature aqueous solutions, combined with a Ag/AgCl reference electrode.Potentials of the Zr/ZrO2 sensor in association with a Ag/AgCl reference electrode vary linearly with pH over a wide pH range, as tested by various NaCl-HCl-H2O solutions(NaOH-NaCl-H2O for basic solutions), at temperatures in the range of 20℃―200℃.Thus, the Zr/ZrO2 sensors can be utilized in monitoring the fluids over the temperature range of 2℃―200℃.The Zr/ZrO2 electrode combined with Ag/AgCl, Ag/Ag2S, and Au electrodes has been used to measure pH and other chemical parameters(dissolved H2, dissolved H2S) of aqueous fluids from low to high temperatures and high pressures in the laboratory and to monitor those parameters of deep-sea water in South China Sea.

  9. Fabrication of intermetallic NiAl by self-propagating high-temperature synthesis reaction using aluminium nanopowder under high pressure

    CERN Document Server

    Dong Shu Shan; Cheng Hai Yong; Yang Hai Bin; Zou Guang Tian

    2002-01-01

    By using aluminium nanopowder prepared by wire electrical explosion, pure monophase NiAl compound with fine crystallites (<=10 mu m) and good densification (98% of the theoretical green density) was successfully fabricated by means of self-propagating high-temperature synthesis (SHS) under a high pressure of 50 MPa. Investigation shows that, due to the physical and chemical characteristics of the nanoparticles, the SHS reaction mode and mechanism are distinct from those when using conventional coarse-grained reactants. The SHS reaction process depends on the thermal conditions related to pressure and can occur at a dramatically low temperature of 308 sup o C, which cannot be expected in conventional SHS reaction. With increasing pressure, the SHS explosive ignition temperature (T sub i sub g) of forming NiAl decreases due to thermal and kinetic effects.

  10. Investigating chemical changes during shelf-life of thermal and high-pressure high-temperature sterilised carrot purees: A 'fingerprinting kinetics' approach.

    Science.gov (United States)

    Kebede, Biniam T; Grauwet, Tara; Palmers, Stijn; Michiels, Chris; Hendrickx, Marc; Van Loey, Ann

    2015-10-15

    This work investigates chemical changes during shelf-life of thermally and high pressure high temperature (HPHT) sterilised carrot purees using a 'fingerprinting kinetics' approach. Fingerprinting enabled selection of Strecker aldehydes, terpenes, phenylpropanoids, fatty acid derivatives and carotenoid degradation products as volatiles clearly changing during shelf-life. Next, kinetic modelling of these volatiles was performed to compare their reaction kinetics during storage in differently sterilised samples. Immediately after processing, the Strecker aldehydes were detected at higher levels in thermally sterilised samples. During storage, the compounds increased at a comparable rate in thermally and HPHT processed samples. In contrast, immediately after processing, most of the naturally occurring terpenes and phenylpropanoids were better preserved in HPHT treated samples. Nevertheless, by the end of storage, the concentration of these compounds decreased to almost the same level in both thermal and HPHT samples (with a higher degradation rate in HPHT samples).

  11. Experimental studies on heat transfer characteristics and natural circulation performance of PRHRS of the high temperature and high pressure thermal-hydraulic test facility

    Energy Technology Data Exchange (ETDEWEB)

    Park, H. S.; Choi, K. Y.; Joe, S.; Park, C. K.; Lee, S. J.; Song, C. W.; Jeong, M. K. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    Several experiments are performed to investigate the heat transfer characteristics and natural circulation performance of passive residual removal system (PRHRS) of the high temperature and high pressure thermal-hydraulic test facility. Especially the natural circulation performance of PRHRS, the heat transfer characteristics of PRHRS heat exchangers and emergency cooldown tank (ECT), and the thermal-hydraulic behavior of the primary loop are investigated in detail. The coolant flows steadily in the natural circulation loop which is composed of the steam generator (SG) primary side, the secondary system, and the PRHRS. The heat transfers through the PRHRS heat exchanger and ECT are sufficient enough to enable the natural circulation of the coolant. Also the experimental results show that the core decay heat are sufficiently removed with the operation of the PRHRS.

  12. Raman scattering of 2H-MoS2 at simultaneous high temperature and high pressure (up to 600 K and 18.5 GPa

    Directory of Open Access Journals (Sweden)

    JianJun Jiang

    2016-03-01

    Full Text Available The Raman spectroscopy of natural molybdenite powder was investigated at simultaneous conditions of high temperature and high pressure in a heatable diamond anvil cell (DAC, to obtain the temperature and pressure dependence of the main Raman vibrational modes (E1g, E 2 g 1 ,A1g, and 2LA(M. Over our experimental temperature and pressure range (300–600 K and 1 atm−18.5 GPa, the Raman modes follow a systematic blue shift with increasing pressure, and red shift with increasing temperature. The results were calculated by three-variable linear fitting. The mutual correlation index of temperature and pressure indicates that the pressure may reduce the temperature dependence of Raman modes. New Raman bands due to structural changes emerged at about 3–4 GPa lower than seen in previous studies; this may be caused by differences in the pressure hydrostaticity and shear stress in the sample cell that promote the interlayer sliding.

  13. Stable solid and aqueous H2CO3 from CO2 and H2O at high pressure and high temperature.

    Science.gov (United States)

    Wang, Hongbo; Zeuschner, Janek; Eremets, Mikhail; Troyan, Ivan; Willams, Jonathan

    2016-01-27

    Carbonic acid (H2CO3) forms in small amounts when CO2 dissolves in H2O, yet decomposes rapidly under ambient conditions of temperature and pressure. Despite its fleeting existence, H2CO3 plays an important role in the global carbon cycle and in biological carbonate-containing systems. The short lifetime in water and presumed low concentration under all terrestrial conditions has stifled study of this fundamental species. Here, we have examined CO2/H2O mixtures under conditions of high pressure and high temperature to explore the potential for reaction to H2CO3 inside celestial bodies. We present a novel method to prepare solid H2CO3 by heating CO2/H2O mixtures at high pressure with a CO2 laser. Furthermore, we found that, contrary to present understanding, neutral H2CO3 is a significant component in aqueous CO2 solutions above 2.4 GPa and 110 °C as identified by IR-absorption and Raman spectroscopy. This is highly significant for speciation of deep C-O-H fluids with potential consequences for fluid-carbonate-bearing rock interactions. As conditions inside subduction zones on Earth appear to be most favorable for production of aqueous H2CO3, a role in subduction related phenomena is inferred.

  14. Apparatus for the investigation of high-temperature, high-pressure gas-phase heterogeneous catalytic and photo-catalytic materials.

    Science.gov (United States)

    Alvino, Jason F; Bennett, Trystan; Kler, Rantej; Hudson, Rohan J; Aupoil, Julien; Nann, Thomas; Golovko, Vladimir B; Andersson, Gunther G; Metha, Gregory F

    2017-05-01

    A high-temperature, high-pressure, pulsed-gas sampling and detection system has been developed for testing new catalytic and photocatalytic materials for the production of solar fuels. The reactor is fitted with a sapphire window to allow the irradiation of photocatalytic samples from a lamp or solar simulator light source. The reactor has a volume of only 3.80 ml allowing for the investigation of very small quantities of a catalytic material, down to 1 mg. The stainless steel construction allows the cell to be heated to 350 °C and can withstand pressures up to 27 bar, limited only by the sapphire window. High-pressure sampling is made possible by a computer controlled pulsed valve that delivers precise gas flow, enabling catalytic reactions to be monitored across a wide range of pressures. A residual gas analyser mass spectrometer forms a part of the detection system, which is able to provide a rapid, real-time analysis of the gas composition within the photocatalytic reaction chamber. This apparatus is ideal for investigating a number of industrially relevant reactions including photocatalytic water splitting and CO2 reduction. Initial catalytic results using Pt-doped and Ru nanoparticle-doped TiO2 as benchmark experiments are presented.

  15. Apparatus for the investigation of high-temperature, high-pressure gas-phase heterogeneous catalytic and photo-catalytic materials

    Science.gov (United States)

    Alvino, Jason F.; Bennett, Trystan; Kler, Rantej; Hudson, Rohan J.; Aupoil, Julien; Nann, Thomas; Golovko, Vladimir B.; Andersson, Gunther G.; Metha, Gregory F.

    2017-05-01

    A high-temperature, high-pressure, pulsed-gas sampling and detection system has been developed for testing new catalytic and photocatalytic materials for the production of solar fuels. The reactor is fitted with a sapphire window to allow the irradiation of photocatalytic samples from a lamp or solar simulator light source. The reactor has a volume of only 3.80 ml allowing for the investigation of very small quantities of a catalytic material, down to 1 mg. The stainless steel construction allows the cell to be heated to 350 °C and can withstand pressures up to 27 bar, limited only by the sapphire window. High-pressure sampling is made possible by a computer controlled pulsed valve that delivers precise gas flow, enabling catalytic reactions to be monitored across a wide range of pressures. A residual gas analyser mass spectrometer forms a part of the detection system, which is able to provide a rapid, real-time analysis of the gas composition within the photocatalytic reaction chamber. This apparatus is ideal for investigating a number of industrially relevant reactions including photocatalytic water splitting and CO2 reduction. Initial catalytic results using Pt-doped and Ru nanoparticle-doped TiO2 as benchmark experiments are presented.

  16. Stable solid and aqueous H2CO3 from CO2 and H2O at high pressure and high temperature

    Science.gov (United States)

    Wang, Hongbo; Zeuschner, Janek; Eremets, Mikhail; Troyan, Ivan; Willams, Jonathan

    2016-01-01

    Carbonic acid (H2CO3) forms in small amounts when CO2 dissolves in H2O, yet decomposes rapidly under ambient conditions of temperature and pressure. Despite its fleeting existence, H2CO3 plays an important role in the global carbon cycle and in biological carbonate-containing systems. The short lifetime in water and presumed low concentration under all terrestrial conditions has stifled study of this fundamental species. Here, we have examined CO2/H2O mixtures under conditions of high pressure and high temperature to explore the potential for reaction to H2CO3 inside celestial bodies. We present a novel method to prepare solid H2CO3 by heating CO2/H2O mixtures at high pressure with a CO2 laser. Furthermore, we found that, contrary to present understanding, neutral H2CO3 is a significant component in aqueous CO2 solutions above 2.4 GPa and 110 °C as identified by IR-absorption and Raman spectroscopy. This is highly significant for speciation of deep C-O-H fluids with potential consequences for fluid-carbonate-bearing rock interactions. As conditions inside subduction zones on Earth appear to be most favorable for production of aqueous H2CO3, a role in subduction related phenomena is inferred.

  17. THE BEHAVIOR OF SOLUBLE METALS ELUTED FROM Ni/Fe-BASED ALLOY REACTORS AFTER HIGH-TEMPERATURE AND HIGH-PRESSURE WATER PROCESS

    Directory of Open Access Journals (Sweden)

    M. Faisal

    2012-05-01

    Full Text Available The behavior of heavy metals eluted from the wall of Ni/Fe-based alloy reactors after high-temperature and high-pressure water reaction were studied at temperatures ranging from 250 to 400oC. For this purpose, water and cysteic acid were heated in two reactor materials which are SUS 316 and Inconel 625. Under the tested conditions, the erratic behaviors of soluble metals eluted from the wall of Ni/Fe-based alloy in high temperature water were observed. Results showed that metals could be eluted even at a short contact time. The presence of air also promotes elution at sub-critical conditions. At sub-critical conditions, a significant amount of Cr was extracted from SUS 316, while only traces of Ni, Fe, Mo and Mn were eluted. In contrast, Ni was removed in significant amounts compared to Cr when Inconel 625 was tested. It was observed that eluted metals tend to increased under acidic conditions and most of those metals were over the limit of WHO guideline for drinking water. The results are significant both on the viewpoint of environmental regulation on disposal of wastes containing heavy metals, toxicity of resulting product and catalytic effect on a particular reaction.

  18. SINGLE CRYSTAL DIFFRACTION OF SIDERITE UP TO 54 GPA AND HIGH PRESSURE-HIGH TEMPERATURE PHASES IN THE Fe-C-O SYSTEM (Invited)

    Science.gov (United States)

    Lavina, B.; Dera, P. K.; Downs, R. T.

    2009-12-01

    Phases in the Fe-C-O system are of interest for the deep carbon cycle, they might play an important role in buffering the mantle fO2. Carbon is also common in the fluid phases that greatly influence the Earth’s processes. The study of the high pressure behavior of siderite and of the phases synthesized after laser heating offers a good opportunity to illustrate the advantages and importance of single crystal diffraction in the high pressure science. The structure of siderite, FeCO3, has been refined up to 54 GPa across the spin pairing transition. Splitting of the diffraction peaks at the transition pressure provides unequivocal evidence of the sharpness of the spin crossover and of the absence of any intermediate volume and therefore of an intermediate spin state at ambient temperature. Diffraction intensities were collected in about 30 minutes at a bending magnet station (HPCAT, APS) and in about one minute at an insertion device station (GSECARS, APS). The quality of the refinement is unvaried in the investigated range, and the results obtained from the two different radiation and detectors are consistent. The refinements provide an accurate and robust determination of the dependence of bond distances and angles with pressure. Subtle structural rearrangements associated with the collapse of the octahedral cation size will be discussed. In situ laser heating is a very powerful method to study minerals at the actual P-T of the Earth’s deep interior. Overcoming the kinetic barriers required for bond breaking and atom diffusion, high pressure-high temperature phases may be synthesized. The analysis of high-pressure phases is very challenging. Diffraction patterns are usually of moderate quality and resolution, furthermore in addition to the sample, the pattern contains the contribution of other phases such as those used to insulate the anvils, to provide a pressure medium and a pressure marker. In several cases after laser heating, we observed phase transitions

  19. Valance electron structure of carbide-diamond interface and catalytic mechanism for diamond synthesis under high-pressure and high-temperature

    Institute of Scientific and Technical Information of China (English)

    GONG Jianhong; XU Bin; YIN Longwei; QI Yongxin; LI Li; SU Qingcai; LI Musen

    2006-01-01

    The metallic films surrounding a synthetic diamond formed under high-pressure and high-temperature (HPHT) in the presence of Fe-based and Ni-based catalysts were studied by scanning electron microscopy (SEM), X-ray diffraction (XRD) and transmission electron microscopy (TEM). It was showed that the carbide was the primary carbon source for the nucleation and growth of diamond. Based on the EET (empirical electron theory in solid and molecules) theory, the valence electron structure of interface between carbide (Fe3C, Ni3C, (Fe, Ni)3C) and diamond was calculated using the bonding length difference (BLD) method. The boundary criterion of Thomas-Fermi-Dirac-Cheng (TFDC): "the electron density being equal on the contacting surfaces of atoms" was applied to analyze the valence structure of carbide-diamond interface. The result based on the calculation valance electron structure is in good accordance with the experimental result. This study is very helpful to reveal the catalytic mechanism of diamond nucleation and growth and design the new catalyst for diamond synthesis.

  20. Possible seismic reflector in the lower crust: Evidence from fabrics and experiments of seismic velocity on layered gabbro at high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    Lattice preferred orientations (LPO) of plagioclase and augite are measured on layered gabbro from the Panxi region, Sichuan Province. The LPO concentration [010] of plagioclase and [100] of augite are perpendicular to the foliation, which indicates a kind of growth fabric associated with crystallizing habits of minerals when the magma is solidifying under the compaction. Calculated seismic velocities based on LPO data of minerals give rise to rather strong anisotropy 5.81% and 5.54% for compressional seismic wave (Vp) and shear seismic wave (Vs), respectively. The experiments at high temperature and high pressure show that the P-wave velocity of layered gabbro is 6.44-6.97 km/s with the maximum Vp anisotropy 5.22% and the Poisson's ratio is between 0.28-0.31. According to the comparison of fabrics with seismic velocities of layered gabbro, it is uggested that the large-scale layered intrusive body or the similar layered geological body may exist in the lower crust of this area. Such a layered intrusive body which has strong seismic anisotropy may be the seismic reflector in the lower crust.

  1. Evolution Characteristics of Saturated Hydrocarbons of Enclosed Organic Matter in Carbonate Minerals in Tieling Limestone Under High Temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    解启来; 陆明勇; 等

    2000-01-01

    The enclosed organic matter chiefly releases lower carbon-number n-alkanes under high temperature and high pressure,while the kerogen mainly produces higher carbon-number n-alkanes.The rsidual hydrocarbons generated by both kerogen and enclosed organic matter in the Tieling limestone contain abundant tricyclic terpanes,pentacyclic triterpanes and steranes,but the contents of tetracyclic terpanes and 25-norhopane are lower.The residual enclosed orgainc matter shows the same distribution characteristics of n-alkanes,steranes and terpanes as that of the original bitumaen A,i.e.,the higher contents of triterpanes and tetracyclic terpanes,the higher ratios of 25-norhopanes over regular hopanes and markedly degraded steranes.By comparing the residual hydrocarbon.residual enclosed orgainc matter and original enclosed orgainc matter.it can be concluded that steranes and terpanes in the residual hydrocarbons are produced mainly by the kerogen and subordinately by the residual enclosed organic matter,the steranes and terpanes do not enter into the residual enclosed organic matter,and the thermal evolution of the residual enclosed organic matter maintains its unique character.Furthermore,pressure retards the pyrolysis of higher carbon-number alkanes and influences the isomerization ratios of C29-steranes,making 20S/(20S+20R) lower under the higher pressure than that under lower pressure,Higher pressure retards the thermal evolution of organic matter.

  2. Effect of steaming, blanching, and high temperature/high pressure processing on the amino Acid contents of commonly consumed korean vegetables and pulses.

    Science.gov (United States)

    Kim, Su-Yeon; Kim, Bo-Min; Kim, Jung-Bong; Shanmugavelan, Poovan; Kim, Heon-Woong; Kim, So-Young; Kim, Se-Na; Cho, Young-Sook; Choi, Han-Seok; Park, Ki-Moon

    2014-09-01

    In the present report, the effects of blanching, steaming, and high temperature/high pressure processing (HTHP) on the amino acid contents of commonly consumed Korean root vegetables, leaf vegetables, and pulses were evaluated using an Automatic Amino Acid Analyzer. The total amino acid content of the samples tested was between 3.38 g/100 g dry weight (DW) and 21.32 g/100 g DW in raw vegetables and between 29.36 g/100 g DW and 30.55 g/100 g DW in raw pulses. With HTHP, we observed significant decreases in the lysine and arginine contents of vegetables and the lysine, arginine, and cysteine contents of pulses. Moreover, the amino acid contents of blanched vegetables and steamed pulses were more similar than the amino acid contents of the HTHP vegetables and HTHP pulses. Interestingly, lysine, arginine, and cysteine were more sensitive to HTHP than the other amino acids. Partial Least Squares-Discriminate Analyses were also performed to discriminate the clusters and patterns of amino acids.

  3. Standard practice for evaluation of disbonding of bimetallic stainless alloy/steel plate for use in high-pressure, high-temperature refinery hydrogen service

    CERN Document Server

    American Society for Testing and Materials. Philadelphia

    2001-01-01

    1.1 This practice covers a procedure for the evaluation of disbonding of bimetallic stainless alloy/steel plate for use in refinery high-pressure/high-temperature (HP/HT) gaseous hydrogen service. It includes procedures to (1) produce suitable laboratory test specimens, (2) obtain hydrogen charging conditions in the laboratory that are similar to those found in refinery HP/HT hydrogen gas service for evaluation of bimetallic specimens exposed to these environments, and (3) perform analysis of the test data. The purpose of this practice is to allow for comparison of data among test laboratories on the resistance of bimetallic stainless alloy/steels to hydrogen-induced disbonding (HID). 1.2 This practice applies primarily to bimetallic products fabricated by weld overlay of stainless alloy onto a steel substrate. Most of the information developed using this practice has been obtained for such materials. The procedures described herein, may also be appropriate for evaluation of hot roll bonded, explosive bonded...

  4. Experimental studies on dynamic system characteristics of the high temperature/high pressure thermal-hydraulic test facility(VISTA) for the power variation

    Energy Technology Data Exchange (ETDEWEB)

    Choi, K. Y.; Park, H. S.; Joe, S.; Park, C. K.; Lee, S. J.; Song, C. W.; Jeong, M. K. [KAERI, Taejon (Korea, Republic of)

    2003-10-01

    Dynamic system characteristics tests were carried out for the power variation by using the high temperature/high pressure thermal-hydraulic test facility, VISTA(Experimental Verification by Integral Simulation of Transient and Accidents), which had been constructed to simulate the SMART-P by KAERI. Experimental tests have been performed to investigate the thermal-hydraulic dynamic characteristics of the primary and the secondary systems in the range of 5% to 85% power. Automatic PID control logics were developed and installed to the VISTA facility to control the major thermal hydraulic parameters. Power was changed with either a step or a ramp changing method from the reference power of 10%, 25%, 50% and 75% to 5% or 10% higher power. It was found that there is no noticeable difference in the responses between a step and a ramp changing method. When unique constants of P, I, and D were used in the range of 5% to 85% power, it was found to be liable to lose the system control. Further studies are required to quantify the controllability and the time constants of the major thermal hydraulic parameters.

  5. High pressure and high temperature in situ X-ray diffraction studies in the Paris-Edinburgh cell using a laboratory X-ray source†

    Science.gov (United States)

    Toulemonde, Pierre; Goujon, Céline; Laversenne, Laetitia; Bordet, Pierre; Bruyère, Rémy; Legendre, Murielle; Leynaud, Olivier; Prat, Alain; Mezouar, Mohamed

    2014-04-01

    We have developed a new laboratory experimental set-up to study in situ the pressure-temperature phase diagram of a given pure element or compound, its associated phase transitions, or the chemical reactions involved at high pressure and high temperature (HP-HT) between different solids and liquids. This new tool allows laboratory studies before conducting further detailed experiments using more brilliant synchrotron X-ray sources or before kinetic studies. This device uses the diffraction of X-rays produced by a quasi-monochromatic micro-beam source operating at the silver radiation (λ(Ag)Kα 1, 2≈0.56 Å). The experimental set-up is based on a VX Paris-Edinburgh cell equipped with tungsten carbide or sintered diamond anvils and uses standard B-epoxy 5 or 7 mm gaskets. The diffracted signal coming from the compressed (and heated) sample is collected on an image plate. The pressure and temperature calibrations were performed by diffraction, using conventional calibrants (BN, NaCl and MgO) for determination of the pressure, and by crossing isochores of BN, NaCl, Cu or Au for the determination of the temperature. The first examples of studies performed with this new laboratory set-up are presented in the article: determination of the melting point of germanium and magnesium under HP-HT, synthesis of MgB2 or C-diamond and partial study of the P, T phase diagram of MgH2.

  6. Methane formation from CaCO3 reduction catalyzed by high pressure

    Institute of Scientific and Technical Information of China (English)

    Jin Yang Chen; Lu Jiang Jin; Jun Ping Dong; Hai Fei Zheng; Gui Yang Liu

    2008-01-01

    Under high pressures of several giga-pascals using hydrothermal diamond anvil cell,methane generated directly from CaCO3 reduction in gold-lined chamber is in situ measured by Raman spectroscopy at the temperature of 550 ℃.The reducing agents include FeO,SiO and natural fayalite (Fe2SiO4),and the resource of hydrogen are water and natural serpentine (Mg3Si2O5(OH)4).The study demonstrates the existence of abiogenic formation of methane under high pressures in the Earth's interior and that the application of high pressure to catalyze multicomponent reactions is a very promising method.

  7. Structural stability of the smectite-doped lanthanum under high pressures and high temperatures; Estabilidade estrutural da esmectita dopada com lantanio sob altas pressoes e altas temperaturas

    Energy Technology Data Exchange (ETDEWEB)

    Stefani, Vicente Fiorini

    2012-07-01

    Smectites are phyllosilicates that have a tetrahedron: octahedron structure ratio of 2:1, with high cation exchange capacity (CEC) in the interlayers. For these and other features, smectites have been used in many parts of the world as secondary barriers with the goal of containing a possible leak of radioactive elements in final disposal facilities for radioactive waste through cation exchange. Our aim in this work is to reach the cation exchange in calcium montmorillonite (smectite dioctahedral) by lanthanum to simulate trivalent radionuclides and to study the stability of this structure under high pressure and high temperature. To achieve high pressure it was used two different technique: DAC (Diamond Anvil Cell), achieving pressures up to 12GPa at room temperature and hydraulic press with a toroidal chamber profile to achieve pressures up to 7,7GPa and temperatures up to 900 degree C. The heating is achieved simultaneously by an electric system coupled in the hydraulic press. The outcomes show that the smectite structure doped with lanthanum remains stable under 12GPa at room temperature and 2.5GPa at 200 degree C. However, above 300 degree C at 2.5GPa the structure becomes a new phase of muscovite-like, rich of La, where it loses its interlayer water and turns out to be irreversible. Furthermore, it is important to point out that the higher temperature the better ordered is the structure and it is still stable under 7.7GPa and 900 degree C. Moreover, after all experiments the structure continues being dioctahedral. The new phase of muscovite-like, rich of La, in contact with a calcium solution remains partially unchanged, whereas the other part returns to the original structure (montmorillonite-Ca). The following analyses were performed: X-ray diffraction (XRD) for evaluating the spatial structure; Fourier transform infrared spectroscopy (FTIR) for getting information about the vibrational modes; scanning electron microscopy with dispersive Xray spectroscopy

  8. The high-temperature modification of LuAgSn and high-pressure high-temperature experiments on DyAgSn, HoAgSn, and YbAgSn

    Energy Technology Data Exchange (ETDEWEB)

    Heying, B.; Rodewald, U.C.; Hermes, W.; Schappacher, F.M.; Riecken, J.F.; Poettgen, R. [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Heymann, G.; Huppertz, H. [Muenchen Univ. (Germany). Dept. fuer Chemie und Biochemie; Sebastian, C.P. [Max-Planck-Institut fuer Chemische Physik Fester Stoffe, Dresden (Germany)

    2008-02-15

    The high-temperature modification of LuAgSn was obtained by arc-melting an equiatomic mixture of the elements followed by quenching the melt on a water-cooled copper crucible. HT-LuAgSn crystallizes with the NdPtSb-type structure, space group P6{sub 3}mc: a = 463.5(1), c = 723.2(1) pm, wR2 = 0.0270, 151 F{sup 2}, and 11 variables. The silver and tin atoms build up two-dimensional, puckered [Ag{sub 3}Sn{sub 3}] networks (276 pm Ag-Sn) that are charge-balanced and separated by the lutetium atoms. The Ag-Sn distances between the [Ag{sub 3}Sn{sub 3}] layers of 294 pm are much longer. Single crystals of isotypic DyAgSn (a = 468.3(1), c = 734.4(1) pm, wR2 = 0.0343, 411 F{sup 2}, and 11 variables) and HoAgSn (a = 467.2(1), c = 731.7(2) pm, wR2 = 0.0318, 330 F{sup 2}, and 11 variables) were obtained from arc-melted samples. Under high-pressure (up to 12.2 GPa) and high-temperature (up to 1470 K) conditions, no transitions to a ZrNiAl-related phase have been observed for DyAgSn, HoAgSn, and YbAgSn. HT-TmAgSn shows Curie-Weiss paramagnetism with {mu}{sub eff} = 7.53(1) {mu}{sub B}/Tm atom and {theta}P = -15.0(5) K. No magnetic ordering was evident down to 3 K. HT-LuAgSn is a Pauli paramagnet. Room-temperature {sup 119}Sn Moessbauer spectra of HT-TmAgSn and HT-LuAgSn show singlet resonances with isomer shifts of 1.78(1) and 1.72(1) mm/s, respectively. (orig.)

  9. Performance and characteristics of a high pressure, high temperature capillary cell with facile construction for operando x-ray absorption spectroscopy.

    Science.gov (United States)

    Bansode, Atul; Guilera, Gemma; Cuartero, Vera; Simonelli, Laura; Avila, Marta; Urakawa, Atsushi

    2014-08-01

    We demonstrate the use of commercially available fused silica capillary and fittings to construct a cell for operando X-ray absorption spectroscopy (XAS) for the study of heterogeneously catalyzed reactions under high pressure (up to 200 bars) and high temperature (up to 280 °C) conditions. As the first demonstration, the cell was used for CO2 hydrogenation reaction to examine the state of copper in a conventional Cu/ZnO/Al2O3 methanol synthesis catalyst. The active copper component of the catalyst was shown to remain in the metallic state under supercritical reaction conditions, at 200 bars and up to 260 °C. With the coiled heating system around the capillary, one can easily change the length of the capillary and control the amount of catalyst under investigation. With precise control of reactant(s) flow, the cell can mimic and serve as a conventional fixed-bed micro-reactor system to obtain reliable catalytic data. This high comparability of the reaction performance of the cell and laboratory reactors is crucial to gain insights into the nature of actual active sites under technologically relevant reaction conditions. The large length of the capillary can cause its bending upon heating when it is only fixed at both ends because of the thermal expansion. The degree of the bending can vary depending on the heating mode, and solutions to this problem are also presented. Furthermore, the cell is suitable for Raman studies, nowadays available at several beamlines for combined measurements. A concise study of CO2 phase behavior by Raman spectroscopy is presented to demonstrate a potential of the cell for combined XAS-Raman studies.

  10. Performance and characteristics of a high pressure, high temperature capillary cell with facile construction for operando x-ray absorption spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Bansode, Atul; Urakawa, Atsushi, E-mail: aurakawa@iciq.es [Institute of Chemical Research of Catalonia (ICIQ), Av. Països Catalans 16, 43007 Tarragona (Spain); Guilera, Gemma; Simonelli, Laura; Avila, Marta [ALBA Synchrotron Light Source, Crta. BP 1413, Km. 3.3, 08290 Cerdanyola del Vallès, Barcelona (Spain); Cuartero, Vera [ALBA Synchrotron Light Source, Crta. BP 1413, Km. 3.3, 08290 Cerdanyola del Vallès, Barcelona (Spain); European Synchrotron Radiation Facility (ESRF), CS40220, F-38043, Grenoble Cedex (France)

    2014-08-15

    We demonstrate the use of commercially available fused silica capillary and fittings to construct a cell for operando X-ray absorption spectroscopy (XAS) for the study of heterogeneously catalyzed reactions under high pressure (up to 200 bars) and high temperature (up to 280 °C) conditions. As the first demonstration, the cell was used for CO{sub 2} hydrogenation reaction to examine the state of copper in a conventional Cu/ZnO/Al{sub 2}O{sub 3} methanol synthesis catalyst. The active copper component of the catalyst was shown to remain in the metallic state under supercritical reaction conditions, at 200 bars and up to 260 °C. With the coiled heating system around the capillary, one can easily change the length of the capillary and control the amount of catalyst under investigation. With precise control of reactant(s) flow, the cell can mimic and serve as a conventional fixed-bed micro-reactor system to obtain reliable catalytic data. This high comparability of the reaction performance of the cell and laboratory reactors is crucial to gain insights into the nature of actual active sites under technologically relevant reaction conditions. The large length of the capillary can cause its bending upon heating when it is only fixed at both ends because of the thermal expansion. The degree of the bending can vary depending on the heating mode, and solutions to this problem are also presented. Furthermore, the cell is suitable for Raman studies, nowadays available at several beamlines for combined measurements. A concise study of CO{sub 2} phase behavior by Raman spectroscopy is presented to demonstrate a potential of the cell for combined XAS-Raman studies.

  11. Adsorption Device Based on a Langatate Crystal Microbalance for High Temperature High Pressure Gas Adsorption in Zeolite H-ZSM-5.

    Science.gov (United States)

    Ding, Wenjin; Baracchini, Giulia; Klumpp, Michael; Schwieger, Wilhelm; Dittmeyer, Roland

    2016-08-25

    We present a high-temperature and high-pressure gas adsorption measurement device based on a high-frequency oscillating microbalance (5 MHz langatate crystal microbalance, LCM) and its use for gas adsorption measurements in zeolite H-ZSM-5. Prior to the adsorption measurements, zeolite H-ZSM-5 crystals were synthesized on the gold electrode in the center of the LCM, without covering the connection points of the gold electrodes to the oscillator, by the steam-assisted crystallization (SAC) method, so that the zeolite crystals remain attached to the oscillating microbalance while keeping good electroconductivity of the LCM during the adsorption measurements. Compared to a conventional quartz crystal microbalance (QCM) which is limited to temperatures below 80 °C, the LCM can realize the adsorption measurements in principle at temperatures as high as 200-300 °C (i.e., at or close to the reaction temperature of the target application of one-stage DME synthesis from the synthesis gas), owing to the absence of crystalline-phase transitions up to its melting point (1,470 °C). The system was applied to investigate the adsorption of CO2, H2O, methanol and dimethyl ether (DME), each in the gas phase, on zeolite H-ZSM-5 in the temperature and pressure range of 50-150 °C and 0-18 bar, respectively. The results showed that the adsorption isotherms of these gases in H-ZSM-5 can be well fitted by Langmuir-type adsorption isotherms. Furthermore, the determined adsorption parameters, i.e., adsorption capacities, adsorption enthalpies, and adsorption entropies, compare well to literature data. In this work, the results for CO2 are shown as an example.

  12. Preliminary Investigation on the Useful Chemicals obtained from High-Temperature and High-Pressure Water Treatment of Hinoki (Chamaecyparis Obutus Bark

    Directory of Open Access Journals (Sweden)

    Hiroyuki Daimon

    2010-12-01

    Full Text Available The possibility of utilizing residual forest biomass to produce valuable chemicals was investigated. An outer layer of a bark of Hinoki (Chamaecyparis obutusa tree, a Japanese cypress, was used as a sample material. Experiments were carried out in a semibatch reactor apparatus that allows the study of the effect of reaction temperatures in a single run. Analysis of the products by GC-MS reveals formation of useful compounds such as furfural, some aromatic compounds (1,3-di-tert-butyl benzene and 2,4-di-tert-butyl phenol, and fatty acids (myristic acid, palmitic acid and stearic acid. Keywords: fatty acids, furfural, high temperature water treatment, hinoki, residual biomass

  13. Using TOUGH2/ECO2H for modeling high-pressure and high-temperature CO2-enhanced geothermal energy extraction from saline systems

    Science.gov (United States)

    Borgia, A.; Pruess, K.; Kneafsey, T. J.; Oldenburg, C. M.

    2011-12-01

    Conventional geothermal energy uses water as the fluid to transport heat to the surface. This has a number of drawbacks principally related to strong water-rock chemical reactions, but also in terms of environmental impacts through overdraft of shallow aquifers with valuable water resources. Various authors have proposed the use of CO2 instead of water to transfer heat because such use may result in better rate of heat extraction, less fluid-rock reactivity, and less demand for scarce ground or surface water resources. TOUGH2/ECO2H was developed to study the behavior of high-pressure high-temperature H2O-CO2-NaCl geothermal systems. To demonstrate and test the code, we have modeled an idealized fractured geothermal system. Based on a five-spot well pattern and its inherent symmetry, we use a model grid of 1/8 of a square with sides of 1 km. In the model, CO2 is injected at the four corner-wells at 20 °C and constant pressure of 2.1*10^7 Pa into a variable salinity reservoir which is initially at 200 °C. The center well produces fluid at a constant pressure of 1.9*10^7 Pa. Initially, H2O + NaCl are produced, followed by a mixture of H2O + CO2 + NaCl and, finally only CO2. As soon as the injected CO2 reaches the production well, usually less than 2 months after injection begins, there is a drastic drop in heat production. This decrease occurs because of a reduced flow rate induced by reduction in effective permeability associated with two-phase flow (liquid + gas) in the reservoir. As the liquid phase dries out, the CO2 flow rate increases slowly over about 2-3 years and the heat production reaches a maximum rate that is about 40% larger than the initial rate of production with just water. Our modeling suggests that this same behavior occurs for highly saline geothermal reservoirs, even though the absolute rate of heat production is about 30% lower than the non-saline models. The decrease in production for saline systems is due to a marked reduction in permeability

  14. Study of the glass formation of high temperature superconductors

    Science.gov (United States)

    Ethridge, Edwin C.; Kaukler, William F.; Rolin, Terry

    1992-01-01

    A number of compositions of ceramic oxide high T(sub c) superconductors were elevated for their glass formation ability by means of rapid thermal analysis during quenching, optical, and electron microscopy of the quenched samples, and with subsequent DSC measurements. Correlations between experimental measurements and the methodical composition changes identified the formulations of superconductors that can easily form glass. The superconducting material was first formed as a glass; then, with subsequent devitrification, it was formed into a bulk crystalline superconductor by a series of processing methods.

  15. High-pressure high-temperature stability of hcp-IrxOs1-x (x = 0.50 and 0.55) alloys

    Energy Technology Data Exchange (ETDEWEB)

    Yusenko, Kirill V.; Bykova, Elena; Bykov, Maxim; Gromilov, Sergey A.; Kurnosov, Alexander V.; Prescher, Clemens; Prakapenka, Vitali B.; Crichton, Wilson A.; Hanfland, Michael; Margadonna, Serena; Dubrovinsky, Leonid S.

    2016-12-23

    Hcp-Ir0.55Os0.45 and hcp-Ir0.50Os0.50 alloys were synthesised by thermal decomposition of single-source precursors in hydrogen atmosphere. Both alloys correspond to a miscibility gap in the Ir–Os binary phase diagram and therefore are metastable at ambient conditions. An in situ powder X-ray diffraction has been used for a monitoring a formation of hcp-Ir0.55Os0.45 alloy from (NH4)2[Ir0.55Os0.45Cl6] precursor. A crystalline intermediate compound and nanodimentional metallic particles with a large concentration of defects has been found as key intermediates in the thermal decomposition process in hydrogen flow. High-temperature stability of titled hcp-structured alloys has been investigated upon compression up to 11 GPa using a multi-anvil press and up to 80 GPa using laser-heated diamond-anvil cells to obtain a phase separation into fcc + hcp mixture. Compressibility curves at room temperature as well as thermal expansion at ambient pressure and under compression up to 80 GPa were collected to obtain thermal expansion coefficients and bulk moduli. hcp-Ir0.55Os0.45 alloy shows bulk moduli B0 = 395 GPa. Thermal expansion coefficients were estimated as α = 1.6·10-5 K-1 at ambient pressure and α = 0.3·10-5 K-1 at 80 GPa. Obtained high-pressure high-temperature data allowed us to construct the first model for pressure-dependent Ir–Os phase diagram.

  16. Determination of the relative resistance to ignition of selected turbopump materials in high-pressure, high-temperature, oxygen environments, volume 1

    Science.gov (United States)

    Stoltzfus, Joel M.; Benz, Frank J.

    1986-01-01

    Advances in the design of the liquid oxygen, liquid hydrogen engines for the Space Transportation System call for the use of warm, high-pressure oxygen as the driving gas in the liquid oxygen turbopump. The NASA Lewis Research Center requested the NASA White Sands Test Facility (WSTF) to design a test program to determine the relative resistance to ignition of nine selected turbopump materials: Hastelloy X, Inconel 600, Invar 36, Monel K-500, nickel 200, silicon carbide, stainless steel 316, and zirconium copper. The materials were subjected to particle impact and to frictional heating in high-pressure oxygen.

  17. High Pressure Scanning Tunneling Microscopy Studies of AdsorbateStructure and Mobility during Catalytic Reactions: Novel Design of anUltra High Pressure, High Temperature Scanning Tunneling MicroscopeSystem for Probing Catalytic Conversions

    Energy Technology Data Exchange (ETDEWEB)

    Tang, David Chi-Wai [Univ. of California, Berkeley, CA (United States)

    2005-05-16

    The aim of the work presented therein is to take advantage of scanning tunneling microscope’s (STM) capability for operation under a variety of environments under real time and at atomic resolution to monitor adsorbate structures and mobility under high pressures, as well as to design a new generation of STM systems that allow imaging in situ at both higher pressures (35 atm) and temperatures (350 °C).

  18. NO{sub x} formation in lean premixed combustion of methane at high pressures

    Energy Technology Data Exchange (ETDEWEB)

    Bengtsson, K.U.M.; Griebel, P.; Schaeren, R. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1999-08-01

    High pressure experiments in a jet-stirred reactor have been performed to study the NO{sub x} formation in lean premixed combustion of methane/air mixtures. The experimental results are compared with numerical predictions using four well known reaction mechanisms and a model which consists of a series of two perfectly stirred reactors and a plug flow reactor. (author) 2 figs., 7 refs.

  19. TURBULENCE SETS THE INITIAL CONDITIONS FOR STAR FORMATION IN HIGH-PRESSURE ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Rathborne, J. M.; Contreras, Y. [CSIRO Astronomy and Space Science, P.O. Box 76, Epping NSW, 1710 (Australia); Longmore, S. N.; Bastian, N. [Astrophysics Research Institute, Liverpool John Moores University, 146 Brownlow Hill, Liverpool L3 5RF (United Kingdom); Jackson, J. M. [Institute for Astrophysical Research, Boston University, Boston, MA 02215 (United States); Kruijssen, J. M. D. [Max-Planck Institut fur Astrophysik, Karl-Schwarzschild-Strasse 1, D-85748, Garching (Germany); Alves, J. F. [University of Vienna, Türkenschanzstrasse 17, A-1180 Vienna (Austria); Bally, J. [Center for Astrophysics and Space Astronomy, University of Colorado, UCB 389, Boulder, CO 8030 (United States); Foster, J. B. [Department of Astronomy, Yale University, P.O. Box 208101 New Haven, CT 06520-8101 (United States); Garay, G. [Universidad de Chile, Camino El Observatorio1515, Las Condes, Santiago (Chile); Testi, L. [European Southern Observatory, Karl-Schwarzschild-Strasse 2, D-85748 Garching bei Munchen (Germany); Walsh, A. J., E-mail: Jill.Rathborne@csiro.au [International Centre for Radio Astronomy Research, Curtin University, GPO Box U1987, Perth (Australia)

    2014-11-10

    Despite the simplicity of theoretical models of supersonically turbulent, isothermal media, their predictions successfully match the observed gas structure and star formation activity within low-pressure (P/k < 10{sup 5} K cm{sup –3}) molecular clouds in the solar neighborhood. However, it is unknown whether or not these theories extend to clouds in high-pressure (P/k > 10{sup 7} K cm{sup –3}) environments, like those in the Galaxy's inner 200 pc central molecular zone (CMZ) and in the early universe. Here, we present Atacama Large Millimeter/submillimeter Array 3 mm dust continuum emission within a cloud, G0.253+0.016, which is immersed in the high-pressure environment of the CMZ. While the log-normal shape and dispersion of its column density probability distribution function (PDF) are strikingly similar to those of solar neighborhood clouds, there is one important quantitative difference: its mean column density is one to two orders of magnitude higher. Both the similarity and difference in the PDF compared to those derived from solar neighborhood clouds match predictions of turbulent cloud models given the high-pressure environment of the CMZ. The PDF shows a small deviation from log-normal at high column densities confirming the youth of G0.253+0.016. Its lack of star formation is consistent with the theoretically predicted, environmentally dependent volume density threshold for star formation which is orders of magnitude higher than that derived for solar neighborhood clouds. Our results provide the first empirical evidence that the current theoretical understanding of molecular cloud structure derived from the solar neighborhood also holds in high-pressure environments. We therefore suggest that these theories may be applicable to understand star formation in the early universe.

  20. High-pressure high-temperature phase relations in FeTiO3 up to 35 GPa and 1600 °C

    Science.gov (United States)

    Akaogi, M.; Abe, K.; Yusa, H.; Ishii, T.; Tajima, T.; Kojitani, H.; Mori, D.; Inaguma, Y.

    2016-08-01

    Phase relations in FeTiO3 were precisely determined at 25-35 GPa and 600-1600 °C using multianvil high-pressure experiments with tungsten carbide anvils. Pressure generation up to about 36 GPa at 1600 °C was evaluated using Al2O3 solubility in MgSiO3 perovskite (Pv) in the system MgSiO3-Al2O3. At about 28 GPa, FeTiO3 Pv dissociates into an assemblage of calcium titanate (CT)-type Fe2TiO4 + orthorhombic-I (OI)-type TiO2 below 1200 °C. However, above 1200 °C at 28 GPa, FeTiO3 Pv decomposes into a new, denser phase assemblage of CT-type Fe2TiO4 + a new compound of FeTi2O5. The new phase FeTi2O5 was recovered as an amorphous phase at 1 atm. In situ X-ray diffraction experiments at 35.1 GPa indicated that the new phase (N-p) FeTi2O5 has orthorhombic symmetry with cell parameters a = 8.567(2) Å, b = 5.753(1) Å and c = 5.257(1) Å. In addition, the assemblage of CT-type Fe2TiO4 + OI-type TiO2 changes to FeO wüstite (Wu) + OI-type TiO2 at about 33 GPa below 1000 °C. The phase assemblages in FeTiO3 are denser in the order: FeTiO3 (Pv) → 1/2Fe2TiO4 (CT) + 1/2TiO2 (OI) → 1/3Fe2TiO4 (CT) + 1/3FeTi2O5 (N-p) → FeO (Wu) + TiO2 (OI). Our results indicate that the upper stability limit of FeTiO3 Pv is about 28 GPa at 600-1600 °C. This puts a constraint on peak shock pressure for formation of naturally discovered lithium niobate-type FeTiO3 which was interpreted to be retrograde transition product of FeTiO3 Pv on release of shock pressure.

  1. Turbulence Sets the Initial Conditions for Star Formation in High-pressure Environments

    Science.gov (United States)

    Rathborne, J. M.; Longmore, S. N.; Jackson, J. M.; Kruijssen, J. M. D.; Alves, J. F.; Bally, J.; Bastian, N.; Contreras, Y.; Foster, J. B.; Garay, G.; Testi, L.; Walsh, A. J.

    2014-11-01

    Despite the simplicity of theoretical models of supersonically turbulent, isothermal media, their predictions successfully match the observed gas structure and star formation activity within low-pressure (P/k 107 K cm-3) environments, like those in the Galaxy's inner 200 pc central molecular zone (CMZ) and in the early universe. Here, we present Atacama Large Millimeter/submillimeter Array 3 mm dust continuum emission within a cloud, G0.253+0.016, which is immersed in the high-pressure environment of the CMZ. While the log-normal shape and dispersion of its column density probability distribution function (PDF) are strikingly similar to those of solar neighborhood clouds, there is one important quantitative difference: its mean column density is one to two orders of magnitude higher. Both the similarity and difference in the PDF compared to those derived from solar neighborhood clouds match predictions of turbulent cloud models given the high-pressure environment of the CMZ. The PDF shows a small deviation from log-normal at high column densities confirming the youth of G0.253+0.016. Its lack of star formation is consistent with the theoretically predicted, environmentally dependent volume density threshold for star formation which is orders of magnitude higher than that derived for solar neighborhood clouds. Our results provide the first empirical evidence that the current theoretical understanding of molecular cloud structure derived from the solar neighborhood also holds in high-pressure environments. We therefore suggest that these theories may be applicable to understand star formation in the early universe.

  2. Characterisation of gas hydrates formation and dissociation using high pressure DSC

    Energy Technology Data Exchange (ETDEWEB)

    Le Parlouer, P. [Thermal Consulting, Caluire (France); Etherington, G. [Setaram Inc., Pennsauken, NJ (United States)

    2008-07-01

    This paper provided details of an innovative methodology that used a high pressure micro-scale differential scanning calorimetry (DSC) method to characterize the thermodynamic properties and kinetics of gas hydrate formation. The calorimeter was based on a symmetrical heat flux design that used a Peltier cooling and heating principle. No refrigerating fluids were required. The method described phase transitions in relation to time, temperature and pressure. The DSC method was designed for use with gas hydrates trapped in marine sediments; hydrate formation in drilling muds and annulars during offshore oil and gas extraction; the storage and transportation of natural gas; and gas hydrate formation and dissociation for cold storage and transportation. Tests demonstrated that the DSC accurately predicted the formation of gas hydrates under high pressure conditions. Experimental studies were conducted to investigate salt solutions under methane pressure; and hydrate dissociation in a sodium chloride (NaC1) and ethyleneglycol solution. Data obtained comparing the method with classical PVT techniques showed that the MicroDSC technique was less time-consuming and required smaller sample volumes. It was concluded that the method is suitable for use with various types of fluids. 13 refs., 7 figs.

  3. DEVELOPMENT OF ELECTRICAL AND ELECTROCHEMICAL PROBES FOR DOWN HOLE AND IN-LINE CHEMICAL ANALYSIS OF HIGH PRESSURE, HIGH TEMPERATURE GEOTHERMAL FLUIDS (Interim Report - Period Ending October 1977)

    Energy Technology Data Exchange (ETDEWEB)

    Danielson, M. J.; Koski, O. H.; Shannon, D. W.

    1977-11-01

    The objectives of this program are to develop probes that can determine the water chemistry of high temperature geothermal fluids. The entire probe system includes a high temperature reference electrode, oxidation potention (redox potential) , conductivity probe, pH, corrosivity, and specific ion probe (sulfide). The objective of this study for FY 1977 was to develop a reference electrode and conductivity probe that would operate in the geothermal environment and provide data. This work also involved a study of sealing materials. A high temperature-pressure, thermodynamic reference electrode was developed which was demonstrated to be operative in a simulated geothermal environment up to 250°C containing the contaminants that would affect its operation. An electrodeless conductivity probe was developed for use in the geothermal environment. This design is particularly resistant to the effects of scale deposition. A large number o f sealing materials were investigated for use in the 250°C geothermal environment. From this study, PNL has developed a spring-loaded seal that may have other applications in the geothermal industry.

  4. In situ detection of two-stage crystallization in ZrTiCuNiBe under high pressure and high temperature

    CERN Document Server

    Sun, L L; Wu, Q; Zhan, Z J; Cao, L M; Wang, L M; Shao, G J; Zhang, J; Wang, W K

    2002-01-01

    Structural changes in bulk metallic Zr sub 4 sub 1 sub . sub 2 Ti sub 1 sub 3 sub . sub 8 Cu sub 1 sub 2 sub . sub 5 Ni sub 1 sub 0 Be sub 2 sub 2 sub . sub 5 glass subjected to heat treatments under high pressure were investigated by means of synchrotron radiation x-ray diffraction (SRXRD). In situ SRXRD measurements showed that the crystallization process of this material is comprised of two stages. Subsequent heating at 10 GPa converts the sample from the amorphous (Am) phase into a metastable fcc phase and then leads to the fcc phase changing back to the Am phase, indicating that there is a kind of 'reversible' phase transition phenomenon occurring in the alloy. Such phenomenon is explained on the basis of free energy considerations.

  5. Instabilities and soot formation in spherically expanding, high pressure, rich, iso-octane-air flames

    Energy Technology Data Exchange (ETDEWEB)

    Lockett, R D [School of Engineering and Mathematical Sciences, City University, Northampton Square, London EC1V OHB (United Kingdom)

    2006-07-15

    Flame instabilities, cellular structures and soot formed in high pressure, rich, spherically expanding iso-octane-air flames have been studied experimentally using high speed Schlieren cinematography, OH fluorescence, Mie scattering and laser induced incandescence. Cellular structures with two wavelength ranges developed on the flame surface. The larger wavelength cellular structure was produced by the Landau-Darrieus hydrodynamic instability, while the short wavelength cellular structure was produced by the thermal-diffusive instability. Large negative curvature in the short wavelength cusps caused local flame quenching and fracture of the flame surface. In rich flames with equivalence ratio {phi} > 1.8, soot was formed in a honeycomb-like structure behind flame cracks associated with the large wavelength cellular structure induced by the hydrodynamic instability. The formation of soot precursors through low temperature pyrolysis was suggested as a suitable mechanism for the initiation of soot formation behind the large wavelength flame cracks.

  6. Toward a self-consistent pressure scale: elastic moduli and equation of state of MgO by simultaneous x-ray density and Brillouin sound velocity measurements at high-pressure high-temperature conditions

    Science.gov (United States)

    Sinogeikin, S. V.; Lakshtanov, D. L.; Prakapenka, V. B.; Sanchez-Valle, C.; Wang, J.; Chen, B.; Shen, G.; Bass, J. D.

    2007-12-01

    Accurate phase diagrams and PVT equations of state (EOS) of materials strongly depend on the PVT calibrations of standard materials (e.g. MgO, NaCl, Au, Pt), which currently do not predict identical pressures at the same experimental conditions. MgO is commonly used as a pressure standard in a variety of high pressure and high- temperature experiments. Despite being one of the simplest and most studied materials, its accurate EOS is still uncertain, especially at high PT. The direct way of obtaining a self consistent pressure scale is by measuring acoustic velocities (Vp and Vs) and density simultaneously. Such P-V-T-Vp-Vs measurements allow one to determine the pressure directly, without resort to a separate calibration standard. Recently, as part of a major COMPRES initiative, we have constructed a Brillouin spectrometer at GSECARS, APS (13-BM-D) which allows accurate simultaneous sound velocity and lattice parameter measurements at high pressures and high temperatures. Such measurements were performed on single crystal MgO at simultaneously high pressures (up to 30 GPa) and high temperatures (up to 873K) in diamond cells with Ne or Ar as pressure medium. At each PT point we measured the unit cell parameters and the acoustic velocities of MgO in several crystallographic directions, and directly obtained all three single crystal elastic moduli, as well as isotropic adiabatic bulk (KS) and shear (μ) moduli. Unit cell parameters of pressure medium (Ne, Ar) and additional pressure calibrants (Au, Pt, NaCl) were measured at each PT for cross calibration. The results of these experiments and implications for a self consistent P-V-T(-Vp-Vs) pressure scale will be presented and discussed.

  7. Toward a self-consistent pressure scale: elastic moduli and equation of state of MgO and Ringwoodite by simultaneous x-ray density and Brillouin sound velocity measurements at high-pressure high-temperature conditions

    Science.gov (United States)

    Sinogeikin, S.; Lakshtanov, D.; Prakapenka, V.; Sanchez-Valle, C.; Wang, J.; Shen, G.; Bass, J.

    2009-05-01

    Accurate phase diagrams and PVT equations of state (EOS) of materials strongly depend on the PVT calibrations of standard materials (e.g. MgO, NaCl, Au, Pt), which currently do not predict identical pressures at the same experimental conditions. MgO is commonly used as a pressure standard in a variety of high pressure and high-temperature experiments. Despite being one of the simplest and most studied materials, its accurate EOS is still uncertain, especially at high PT. The direct way of obtaining a self consistent pressure scale is by measuring acoustic velocities (Vp and Vs) and density simultaneously. Such P-V-T-Vp-Vs measurements allow one to determine the pressure directly, without resort to a separate calibration standard. Recently, as part of a major COMPRES initiative, we have constructed a Brillouin spectrometer at GSECARS, APS (13-BM-D) which allows accurate simultaneous sound velocity and lattice parameter measurements at high pressures and high temperatures. Such measurements were performed on single crystal MgO at simultaneously high pressures (up to 30 GPa) and high temperatures (up to 873K) in diamond cells. At each PT point we measured the unit cell parameters and the acoustic velocities of MgO in several crystallographic directions, and directly obtained all three single crystal elastic moduli, as well as isotropic adiabatic bulk (Ks) and shear (μ) moduli. Unit cell parameters of pressure medium (Ne, Ar) and additional pressure calibrants (Au, Pt, NaCl) were measured at each PT for cross calibration. In addition we demonstrate that successful P-V-T-Vp-Vs measurements can be performed on certain polycrystalline materials, e.g. Ringwoodite (γ-Mg2SiO4). The results of these experiments and implications for a self consistent P-V-T(-Vp-Vs) pressure scale will be presented and discussed.

  8. Solubility study of nickel ferrite in boric acid using a flow-through autoclave system under high temperature and high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Park, Yong Joon; Choi, Ke Chon; Ha, Yeong Keong [Nuclear Chemistry Research Division, Korea Atomic Energy Research Institute, Daejeon (Korea, Republic of)

    2016-04-15

    The solubility of nickel ferrite in an aqueous solution of boric acid was studied by varying the pH at the temperatures ranging from 25 .deg. C to 320 .deg. C. A flow-through autoclave system was specially designed and fabricated to measure the solubility of Fe in hydrothermal solutions under high temperature and pressure. The performance of this flow-through system was directly compared with the conventional static state technique using a batch-type autoclave system. The stability of fluid velocity for the flow-through autoclave system was verified prior to the solubility measurement. The influence of chemical additives, such as boric acid and H2, on the solubility of nickel ferrite was also evaluated.

  9. Exploring the Chemical Reactivity between Carbon Dioxide and Three Transition Metals (Au, Pt, and Re) at High-Pressure, High-Temperature Conditions.

    Science.gov (United States)

    Santamaría-Pérez, David; McGuire, Chris; Makhluf, Adam; Kavner, Abby; Chuliá-Jordán, Raquel; Pellicer-Porres, Julio; Martinez-García, Domingo; Doran, Andrew; Kunz, Martin; Rodríguez-Hernández, Plácida; Muñoz, Alfonso

    2016-10-06

    The role of carbon dioxide, CO2, as oxidizing agent at high pressures and temperatures is evaluated by studying its chemical reactivity with three transition metals: Au, Pt, and Re. We report systematic X-ray diffraction measurements up to 48 GPa and 2400 K using synchrotron radiation and laser-heating diamond-anvil cells. No evidence of reaction was found in Au and Pt samples in this pressure-temperature range. In the Re + CO2 system, however, a strongly-driven redox reaction occurs at P > 8 GPa and T > 1500 K, and orthorhombic β-ReO2 is formed. This rhenium oxide phase is stable at least up to 48 GPa and 2400 K and was recovered at ambient conditions. Raman spectroscopy data confirm graphite as a reaction product. Ab-initio total-energy structural and compressibility data of the β-ReO2 phase shows an excellent agreement with experiments, altogether accurately confirming CO2 reduction P-T conditions in the presence of rhenium metal and the β-ReO2 equation of state.

  10. High-temperature and high-pressure water solubility in ethylbenzene to 200°C and 1 kbar and the acetic acid effect

    Science.gov (United States)

    Guillaume, Damien; Tkachenko, Sergey; Dubessy, Jean; Pironon, Jacques

    2001-10-01

    Water solubility in hydrocarbon systems is of great interest for deep oil fields. A new autoclave has been designed to measure phase equilibria in water-hydrocarbon systems up to 400°C and 1.5 kbar. It has been applied for the measurement of water solubility in ethylbenzene with or without acetic acid to 200°C and 1 kbar in the two-phase field. Water solubility was measured by the Karl Fisher method. The acetic acid concentration was measured by FT-IR microspectroscopy. Both the experimental procedure and analytical techniques were validated by showing the consistency of our data with those of Heidman et al. (;High-temperature mutual solubilities of hydrocarbons and water,; AIChE J.31, 376-384, 1995) along the liquid-liquid-vapor curve. At constant pressure, the solubility of water in ethylbenzene increases significantly with temperature. On the other hand, at constant temperature, the solubility of water is constant to 1 kbar at 100°C, and decreases slightly with pressure at 150 and 200°C. Data were regressed by the Krichevsky-Kasarnovsky equation to obtain estimates of the Henry's law constant and estimates of the molar volume of water at infinite dilution. Acetic acid increases the solubility of water in ethylbenzene and fractionates preferentially into the aqueous phase.

  11. Study of cements silicate phases hydrated under high pressure and high temperature; Etude des phases silicatees du ciment hydrate sous haute pression et haute temperature

    Energy Technology Data Exchange (ETDEWEB)

    Meducin, F.

    2001-10-01

    This study concerns the durability of oil-well cementing. Indeed, in oil well cementing a cement slurry is pumped down the steel casing of the well up the annular space between it and the surrounding rock to support and protect the casing. The setting conditions of pressure and temperature may be very high (up to 1000 bar and 250 deg C at the bottom of the oil-well). In this research, the hydration of the main constituent of cement, synthetic tri-calcium silicate Ca{sub 3}SiO{sub 2}, often called C{sub 3}S (C = CaO; S = SiO{sub 2} and H H{sub 2}O), is studied. Calcium Silicate hydrates are prepared in high-pressure cells to complete their phase diagram (P,T) and obtain the stability conditions for each species. Indeed, the phases formed in these conditions are unknown and the study consists in the hydration of C{sub 3}S at different temperatures, pressures, and during different times to simulate the oil-well conditions. In a first step (until 120 deg C at ambient pressure) the C-S-H, a not well crystallized and non-stoichiometric phase, is synthesized: it brings adhesion and mechanical properties., Then, when pressure and temperature increase, crystallized phases appear such as jaffeite (Ca{sub 6}(Si{sub 2}O{sub 7})(OH){sub 6}) and hillebrandite (Ca{sub 2}(SiO{sub 3})(OH){sub 2}). Silicon {sup 29}Si Nuclear Magnetic Resonance (using standard sequences MAS, CPMAS) allow us to identify all the silicates hydrates formed. Indeed, {sup 29}Si NMR is a valuable tool to determine the structure of crystallized or not-well crystallized phases of cement. The characterization of the hydrated samples is completed by other techniques: X- Ray Diffraction and Scanning Electron Microscopy. The following results are found: jaffeite is the most stable phase at C/S=3. To simulate the hydration of real cement, hydration of C{sub 3}S with ground quartz and with or without super-plasticizers is done. In those cases, new phases appear: kilchoanite mainly, and xonotlite. A large amount of

  12. Novel hydrophobic associated polymer based nano-silica composite with core–shell structure for intelligent drilling fluid under ultra-high temperature and ultra-high pressure

    Directory of Open Access Journals (Sweden)

    Hui Mao

    2015-02-01

    Full Text Available Micro-nano-based drilling fluid has attracted a strong interest due to its attractive properties, and micro-nano composite materials have great potential for developing intelligent drilling fluid. In this study a novel hydrophobic associated polymer based nano-silica composite with core–shell structure was prepared and characterized by PSD, SEM, TEM and ESEM. The results showed that the composite, as a micro-nano drilling fluid additive, possessed excellent properties such as thermal stability, rheology, fluid loss and lubricity. Especially, it could plug the formation effectively and improve the pressure bearing capability of formation significantly.

  13. Characterization of the Materials Synthesized by High Pressure-High Temperature Treatment of a Polymer Derived t-BC2N Ceramic

    Directory of Open Access Journals (Sweden)

    Gabriela Mera

    2011-11-01

    Full Text Available Bulk B-C-N materials were synthesized under static high thermobaric conditions (20 GPa and 2,000 °C in a multianvil apparatus from a polymer derived t-BC1.97N ceramic. The bulk samples were characterised using X-ray synchrotron radiation and analytical transmission electron microscopy in combination with electron energy loss spectroscopy. Polycrystalline B-C-N materials with a cubic type structure were formed under the applied reaction conditions, but the formation of a ternary cubic diamond-like c-BC2N compound, could not be unambiguously confirmed.

  14. Effect of oils and structural materials on the formation of high-temperature deposits

    Energy Technology Data Exchange (ETDEWEB)

    Gutenev, B.S.; Poroikov, N.P.; Bakunin, V.N.

    1987-01-01

    The objective of the study was to establish a relationship between the amount of deposits formed on the hot surfaces of gas turbine engine components, oil composition, and the nature of the structural materials in contact with the oil. A method and a test apparatus are described which make it possible to evaluate the effect of various structural materials on the formation of deposits. It is shown that copper, lead, and brass have a particularly strong catalytic effect on the formation of high-temperature deposits in the presence of oils. Various synthetic oils are evaluated with respect to their tendency to form deposits, and the mechanisms responsible for the formation of high-temperature deposits are briefly examined. 7 references.

  15. Effect of O{sub 2} on corrosion of 3Cr steel in high temperature and high pressure CO{sub 2}–O{sub 2} environment

    Energy Technology Data Exchange (ETDEWEB)

    Lin, Xueqiang; Liu, Wei, E-mail: weiliu@ustb.edu.cn; Wu, Fei; Xu, Chuanchuan; Dou, Juanjuan; Lu, Minxu

    2015-02-28

    Highlights: • 3Cr steel suffered severe localized corrosion in CO{sub 2}–O{sub 2} environment. • Fe(OH){sub 3} in CO{sub 2}–O{sub 2} corrosion scale of 3Cr steel caused Cr nonuniform distribution. • A development mechanism of CO{sub 2}–O{sub 2} corrosion pits of 3Cr steel was proposed. - Abstract: The development of corrosion scale of 3Cr steel in an aqueous environment containing 95% CO{sub 2}–5% O{sub 2} was characterized and analyzed by scanning electron microscopy (SEM), energy-dispersive spectrometry (EDS), X-ray diffraction (XRD) and in situ electrochemical impedance spectroscopy (EIS). The results show that the corrosion of 3Cr steel was promoted by dissolved oxygen. Fe(OH){sub 3} precipitation formed at local areas, leading to the nonuniform distribution of Cr element and pitting corrosion. With the increase of corrosion time, Cr-rich area formed at the bottom of pits, where the pitting corrosion process was inhibited. The importance of Fe(OH){sub 3} and Cr-rich area on the formation of corrosion pits and pits development was emphasized.

  16. High Pressure Biomass Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Agrawal, Pradeep K [Georgia Tech Research Corporation, Atlanta, GA (United States)

    2016-07-29

    According to the Billion Ton Report, the U.S. has a large supply of biomass available that can supplement fossil fuels for producing chemicals and transportation fuels. Agricultural waste, forest residue, and energy crops offer potential benefits: renewable feedstock, zero to low CO2 emissions depending on the specific source, and domestic supply availability. Biomass can be converted into chemicals and fuels using one of several approaches: (i) biological platform converts corn into ethanol by using depolymerization of cellulose to form sugars followed by fermentation, (ii) low-temperature pyrolysis to obtain bio-oils which must be treated to reduce oxygen content via HDO hydrodeoxygenation), and (iii) high temperature pyrolysis to produce syngas (CO + H2). This last approach consists of producing syngas using the thermal platform which can be used to produce a variety of chemicals and fuels. The goal of this project was to develop an improved understanding of the gasification of biomass at high pressure conditions and how various gasification parameters might affect the gasification behavior. Since most downstream applications of synags conversion (e.g., alcohol synthesis, Fischer-Tropsch synthesis etc) involve utilizing high pressure catalytic processes, there is an interest in carrying out the biomass gasification at high pressure which can potentially reduce the gasifier size and subsequent downstream cleaning processes. It is traditionally accepted that high pressure should increase the gasification rates (kinetic effect). There is also precedence from coal gasification literature from the 1970s that high pressure gasification would be a beneficial route to consider. Traditional approach of using thermogravimetric analyzer (TGA) or high-pressure themogravimetric analyzer (PTGA) worked well in understanding the gasification kinetics of coal gasification which was useful in designing high pressure coal gasification processes. However

  17. Structure of a new high-pressure-high-temperature modification of antimony(III) oxide, γ-Sb2O3, from high-resolution synchrotron powder diffraction data.

    Science.gov (United States)

    Orosel, Denis; Dinnebier, Robert E; Blatov, Vladislav A; Jansen, Martin

    2012-02-01

    A quenchable new high-pressure-high-temperature modification of antimony(III) oxide, γ-Sb(2)O(3), has been obtained at hydrostatic pressures of 9-11 GPa and temperatures of 573-773 K. Its crystal structure has been determined from high-resolution synchrotron powder diffraction data. γ-Sb(2)O(3) consists of three-dimensionally cross-linked infinite chains of SbO(3)E units (E = lone pair) with the chains forming tetragonal rod-packing. The underlying topology of γ-Sb(2)O(3) (3,3T8) is found very rarely in inorganic structures; it is realised only for the polyanion [Si(4)O(4)N(6)](10-) that occurs in the Ce(4)(Si(4)O(4)N(6))O structure type. The structural relation to the two previously known polymorphs of Sb(2)O(3) at ambient pressure, valentinite and senarmontite is discussed.

  18. Formation of epsilon martensite by high-pressure torsion in a TRIP steel

    Energy Technology Data Exchange (ETDEWEB)

    Figueiredo, Roberto B., E-mail: figueiredo-rb@ufmg.br [Department of Materials Engineering and Civil Construction, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil); Sicupira, Felipe L.; Malheiros, Livia Raquel C. [Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil); Kawasaki, Megumi [Division of Materials Science and Engineering, Hanyang University, 17 Haengdang-dong, Seongdong-gu, Seoul 133-791 (Korea, Republic of); Santos, Dagoberto B. [Department of Metallurgical and Materials Engineering, Universidade Federal de Minas Gerais, Belo Horizonte, MG 31270-901 (Brazil); Langdon, Terence G. [Materials Research Group, Faculty of Engineering and the Environment, University of Southampton, Southampton SO17 1BJ (United Kingdom); Departments of Aerospace & Mechanical Engineering and Materials Science, University of Southern California, Los Angeles, CA 90089-1453 (United States)

    2015-02-11

    An Fe–17% Mn–0.06% C–2% Si–3% Al–1% Ni steel exhibiting a phase transformation induced by room temperature deformation was processed by high-pressure torsion (HPT) using a pressure of 6.0 GPa and with the samples subjected to different amounts of torsional straining up to a maximum of 10 turns. A microstructural analysis revealed a phase transformation in the early stages of deformation and a gradual evolution towards a fully-deformed structure. Microhardness measurements showed two stages of hardening with eventual softening at large strains. From X-ray diffraction (XRD) analysis, there is evidence for a reverse martensitic transformation and the stabilization of an h.c.p. epsilon (ε) structure. The formation of an h.c.p. structure takes place in this steel at lower pressures than for pure iron but the results agree with earlier reports of the presence of an ε phase in stainless steel processed by HPT and with the expected reduction in the transition pressure due to the Mn addition.

  19. Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells.

    Science.gov (United States)

    Li, Yinshi; Sun, Xianda; Feng, Ying

    2017-03-11

    Conventionally, both the thermal degradation of the anion-exchange membrane and the requirement of additional hydroxide for fuel oxidation reaction hinder the development of the high-temperature alkaline direct liquid fuel cells. The present work addresses these two issues by reporting a polybenzimidazole-membrane-based direct formate fuel cell (DFFC). Theoretically, the cell voltage of the high-temperature alkaline DFFC can be as high as 1.45 V at 90 °C. It has been demonstrated that a proof-of-concept alkaline DFFC without adding additional hydroxide yields a peak power density of 20.9 mW cm(-2) , an order of magnitude higher than both alkaline direct ethanol fuel cells and alkaline direct methanol fuel cells, mainly because the hydrolysis of formate provides enough OH(-) ions for formate oxidation reaction. It was also found that this hydroxide self-feeding high-temperature alkaline DFFC shows a stable 100 min constant-current discharge at 90 °C, proving the conceptual feasibility.

  20. Paterson高温高压流变仪及其在岩石流变学的应用%Paterson Gas-Medium High-Pressure High-Temperature Testing System and its Applications in Rheology of Rocks

    Institute of Scientific and Technical Information of China (English)

    邵同宾; 嵇少丞; 李建峰; 王茜; 宋茂双

    2011-01-01

    The Earth is a dynamic system in which rocks deform under various physical and chemical conditions. A continuous improvement of the related testing and analysis techniques during the past decades has enabled the rheology of the Earth materials to be studied successfully in the laboratory and made important advances in the interpretation of natural deformation and structure in the crust and upper mantle. The goal of this paper is to provide a succinct overview on technical developments of experimental rock deformation equipment with a particular focus on the Paterson High-Pressure High-Temperature Testing System ( HPT). The HPT is an internally-heated gas-confining medium high temperature (up to~1500℃ ) and high pressure (up to 700MPa) triaxial deformation apparatus. Unlike the solidmedium Criggs apparatus, the HPT can measure temperature, confine pressure, differential stress and strain with great accuracy and precision so that high quality mechanical data can be obtained. The HPT allows various types of tests to be carried out in compression, extension and torsion: constant strain rate, creep (constant stress), relaxation, etc. , depending on the capabilities of the actuator system fitted. Using the pore fluid system equipped with the apparatus, one can also automatically control the pore fluid pressure and measure the volume of pore fluid entering or leaving the specimen, and subsequently the volume change of the specimen during an experimental deformation. The apparatus is regarded as the most powerful testing tool in the research of mechanical behavior and physical properties of minerals and rocks. This paper also provides a brief summary for the applications of the HPT to address various important geological and geophysical problems such as rheology and fracture mechanics of polyphase rocks, formation and extraction of partial melt, brittle-ductile transition, dynamic recrystallization and development of lattice preferred orientation, and seismic

  1. High-pressure and high-temperature physical properties of half-metallic full-Heusler alloy Mn2RuSi by first-principles and quasi-harmonic Debye model

    Science.gov (United States)

    Song, Ting; Ma, Qin; Sun, Xiao-Wei; Liu, Zi-Jiang; Wei, Xiao-Ping; Tian, Jun-Hong

    2017-02-01

    First-principles calculations based on density functional theory and quasi-harmonic Debye model are used to investigate the high-pressure and high-temperature physical properties, including the lattice constant, magnetic moment, density of states, pressure-volume-temperature relationship, bulk modulus, thermal expansivity, heat capacity, and Grüneisen parameter for the new Mn-based full-Heusler alloy Mn2RuSi in CuHg2Ti-type structure. The optimized equilibrium lattice constant is consistent with experimental and other theoretical results. The calculated total spin magnetic moment remains an integral value of 2.0 μB in the lattice constant range of 5.454-5.758 Å, and then decreases very slowly with the decrease of lattice constant to 5.333 Å. By the spin resolved density of states calculations, we have shown that Mn2RuSi compound presents half-metallic ferrimagnetic properties under the equilibrium lattice constant. The effects of temperature and pressure on bulk modulus, thermal expansivity, heat capacity, and Grüneisen parameter are opposite, which are consistent with a compression rate of volume. Furthermore, the results show that the effect of temperature is larger than pressure for heat capacity and the effect of high temperature and pressure on thermal expansion coefficient is small. All the properties of Mn2RuSi alloy are summarized in the pressure range of 0-100 GPa and the temperature up to 1200 K.

  2. Heterogeneous Earth Accretion and Incomplete Metal-Silicate Reequilibration at High Pressure During Core Formation

    Science.gov (United States)

    Rubie, D. C.; Mann, U.; Frost, D. J.; Kegler, P.; Holzheid, A.; Palme, H.

    2007-12-01

    We present a new model of core formation, based on the partitioning of siderophile elements, that involves accreting the Earth through a series of collisions with smaller bodies that had already differentiated at low pressure. Each impact results in a magma ocean in which the core of the impactor reequilibrates with silicate liquid at high pressure before merging with the Earth's protocore. The oxygen contents of the chondritic compositions of the proto-Earth and impactors can be varied. The compositions of coexisting metal and silicate are determined through mass balance combined with partitioning equations for Ni, FeO, Si and other siderophile elements. The oxygen fugacity is fixed by the partitioning of FeO and is a function of P, T and bulk oxygen content. An important constraint for core formation is that core-mantle partition coefficients for Ni and Co must both converge to values of 23-28. Based on a recent study of the partitioning of Ni and Co over a wide P-T range (Kegler et al., EPSL, submitted) together with other published data, this constraint is not satisfied by a single- stage core formation model at any conditions because the partition coefficients converge at values that are much too low. In the present multi-stage model, the correct values can be reached if only part of each impactor core reequilibrates with silicate liquid in the magma ocean (as proposed by previous models based on Hf-W isotope studies). Physically, this would mean that impactor cores fail to emulsify completely as they sink through the magma ocean. Incorporating other elements (e.g. V and Cr) in the model requires, in addition, that the bulk composition of the impactors changes during accretion from reduced (FeO-poor) to oxidised FeO-rich). Then, with the resulting increase in fO2, incomplete reequilibration of the cores during the final 20-30% of Earth accretion is required to satisfy the Ni-Co constraint. In addition, this model enables the concentrations of O and Si in the

  3. Formation and properties of water from quartz and hydrogen at high pressure and temperature

    Science.gov (United States)

    Futera, Zdenek; Yong, Xue; Pan, Yuanming; Tse, John S.; English, Niall J.

    2017-03-01

    Quartz, as the most stable low-pressure polymorph of silica (SiO2), is widely abundant in Earth's crust and mantle, exhibiting relatively high chemical stability. Although silica is only slightly soluble in water at ambient conditions, producing silicon-based weakly acidic compounds, Shinozaki et al. (2014) have shown recently that water itself can be formed by dissolution of SiO2 in H2 fluid under high- temperature and pressure conditions. Here, we have simulated this process via molecular-dynamics techniques based on a reactive force-field description of the Si O2 /H2 interface. Diffusion of the H2 fluid into the quartz crystal lattice was observed upon increasing temperature and pressure, followed by interaction of dissociated, atomic hydrogen with oxygen atoms in the SiO2 lattice, disrupting the lattice and leading to the formation of water. Interestingly, water is evolved in the subsurface region of the silica, and it remains confined there, isolated from the hydrogen fluid, which corresponds precisely to the ice-like spectroscopic patterns observed experimentally. The over-pressured water formed from quartz and H2 is a possible trigger for nucleating enigmatic deep earthquakes in the continental mantle lithosphere.

  4. Experimental investigation of the garnet formation in the CMNAS system at high pressure under deviatoric stress

    Science.gov (United States)

    Heidelbach, F.

    2015-12-01

    sliding. In the samples deformed at high pressures also garnets developed subgrain structures and dispersions of the crystal lattice orientation consistent with the external deformation geometry indicating intracrystalline plasticity during growth.

  5. Theoretical investigation of formation of impurity bipolaronic states in covalent semiconductors and high temperature superconductors

    CERN Document Server

    Yavidov, B Y

    2001-01-01

    superconducting properties of doped HTSC compounds have been accounted for with framework of lattice and impurity bipolarons concepts. The theoretical results obtained are in satisfactory agreement with experiment. A theory has been developed of carrier localization around an impurity which takes account of correlation effect between carriers, short- and long range interaction in 'carrier-impurity-lattice' system within the framework of the continuum model in the adiabatic approximation. Possibility of impurity (bi)polaron formation in covalent semiconductors (Si) and high temperature superconductors (HTSC) (La sub 2 sub - sub x Sr sub x Cu sub 4) has been studied theoretically. The impurity bi polaron formation has been analyzed by two scenarios: paring and sequential localization of carriers in the vicinity of impurity atom. It is shown that the impurity bi polaron of large radius does not form in Si while its formation is possible in crystals with x<0.186, where x is the ratio of high frequency dielectr...

  6. Influence of oils and materials of construction on formation of high-temperature deposits

    Energy Technology Data Exchange (ETDEWEB)

    Gutenev, B.S.; Poroikov, N.P.; Bakunin, V.N.

    1988-01-01

    A correlation was established between the quantity of deposits formed on the hot surfaces of gas turbine engines and the oil composition and material composition and corrosion behavior for those engine parts in contact with the oil. A test stand was designed for determining the effect of engine materials on deposit formation. Test results established that the strongest catalytic effects on the process of high-temperature deposit formation derive from copper, lead, and brass components. The metals were tested in a range of synthetic lubricating oils. Data were compared on interactions of the oils with a steel surface and were ranked in order of decreasing tendency to form deposits. Maximum working temperatures for the oils were determined. The effects of oil additives on deposition were also assessed.

  7. Formation of nanocrystalline MgB sub 2 under high pressure

    CERN Document Server

    Sun, L; Kikegawa, T; Cao, L; Zhan, Z; Wu, Q; Wu, X; Wang, W

    2002-01-01

    The microstructural features of MgB sub 2 at ambient pressure and high pressure have been investigated by means of in situ synchrotron radiation x-ray diffraction and transmission electron microscopy (TEM). The x-ray diffraction measurements indicated that nanocrystalline MgB sub 2 formed in the pressure range of 26.3-30.2 GPa. TEM investigations reveal complex structure domains with evident lattice distortion in the relevant samples. The superconductivity of nanocrystalline MgB sub 2 was measured and compared with that of the starting sample of MgB sub 2.

  8. Crystal structures and compressibility of novel iron borides Fe{sub 2}B{sub 7} and Fe{sub x}B{sub 50} synthesized at high pressure and high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Bykova, E., E-mail: elena.bykova@uni-bayreuth.de [Bavarian Research Institute of Experimental Geochemistry and Geophysics, University of Bayreuth, D-95440 Bayreuth (Germany); Laboratory of Crystallography, University of Bayreuth, D-95440 Bayreuth (Germany); Gou, H.; Bykov, M. [Laboratory of Crystallography, University of Bayreuth, D-95440 Bayreuth (Germany); Hanfland, M. [European Synchrotron Radiation Facility, BP 220, Grenoble F-38043 (France); Dubrovinsky, L. [Bavarian Research Institute of Experimental Geochemistry and Geophysics, University of Bayreuth, D-95440 Bayreuth (Germany); Dubrovinskaia, N. [Laboratory of Crystallography, University of Bayreuth, D-95440 Bayreuth (Germany)

    2015-10-15

    We present here a detailed description of the crystal structures of novel iron borides, Fe{sub 2}B{sub 7} and Fe{sub x}B{sub 50} with various iron content (x=1.01(1), 1.04(1), 1.32(1)), synthesized at high pressures and high temperatures. As revealed by high-pressure single-crystal X-ray diffraction, the structure of Fe{sub 2}B{sub 7} possesses short incompressible B–B bonds, which make it as stiff as diamond in one crystallographic direction. The volume compressibility of Fe{sub 2}B{sub 7} (the bulk modulus K{sub 0}= 259(1.8) GPa, K{sub 0}′= 4 (fixed)) is even lower than that of FeB{sub 4} and comparable with that of MnB{sub 4}, known for high bulk moduli among 3d metal borides. Fe{sub x}B{sub 50} adopts the structure of the tetragonal δ-B, in which Fe atoms occupy an interstitial position. Fe{sub x}B{sub 50} does not show considerable anisotropy in the elastic behavior. - Graphical abstract: Crystal structures of novel iron borides, Fe{sub 2}B{sub 7} and Fe{sub x}B{sub 50} (x=1.01(1), 1.04(1), 1.32(1)). - Highlights: • Novel iron borides, Fe{sub 2}B{sub 7} and Fe{sub x}B{sub 50}, were synthesized under HPHT conditions. • Fe{sub 2}B{sub 7} has a unique orthorhombic structure (space group Pbam). • Fe{sub 2}B{sub 7} possesses short incompressible B–B bonds that results in high bulk modulus. • Fe{sub x}B{sub 50} adopts the structure of the tetragonal δ-B composed of B{sub 12} icosahedra. • In Fe{sub x}B{sub 50} intraicosahedral bonds are stiffer than intericosahedral ones.

  9. Latitudinal variation in sensitivity of flower bud formation to high temperature in Japanese Taraxacum officinale.

    Science.gov (United States)

    Yoshie, Fumio

    2014-05-01

    Control of flowering time plays a key role in the successful range expansion of plants. Taraxacum officinale has expanded throughout Japan during the 110 years after it was introduced into a cool temperate region. The present study tested a hypothesis that there is a genetic difference in the bud formation time in relation to temperature along latitudinal gradient of T. officinale populations. In Experiment 1, plants from three populations at different latitudes (26, 36, and 43°N) were grown at three temperatures. Time to flower bud appearance did not significantly differ among the three populations when plants were grown at 14 °C, whereas it increased with increasing latitude when grown at 19 and 24 °C. Rosette diameter was not different among the populations, indicating that the variation in bud formation time reflected a difference in genetic control rather than size variation. The latitudinal variation in bud appearance time was confirmed by Experiment 2 in which plants from 17 population were used. In Experiment 3, the size of plants that exhibited late-flowering was studied to test a hypothesis that the variation in flowering time reflects dormancy of vegetative growth, but the late-flowering plants were found to continue growth, indicating that vegetative dormancy was not the cause of the variation. The results clearly indicate that the degree of suppression of flower bud formation at high temperature decreases with latitude from north to south, which is under genetic control.

  10. High-pressure/high-temperature synthesis and characterization of the first palladium or platinum containing lithium transition-metal sulfides Li2M3S4 (M=Pd, Pt)

    Science.gov (United States)

    Heymann, Gunter; Niehaus, Oliver; Krüger, Hannes; Selter, Philipp; Brunklaus, Gunther; Pöttgen, Rainer

    2016-10-01

    The new lithium transition-metal sulfides Li2M3S4 (M=Pd, Pt) were obtained via multianvil high-pressure/high-temperature syntheses at 8 GPa and 1150 °C starting from a stoichiometric mixture of lithium nitride, sulfur, and palladium or platinum. Single crystal structure analyses indicated the space group P21/c (no. 14) with the following lattice parameters and refinement results: a=492.9(1), b=1005.9(2), c=614.9(2) pm, β=110.9 (1)°, R1=0.0165, wR2=0.0308 (all data) for Li2Pd3S4 and a=498.2(1), b=1005.5(2), c=613.0(2) pm, β=110.8(1)°, R1=0.0215, wR2=0.0450 (all data) for Li2Pt3S4. The crystal structures are built up from two distinct Pd/Pt sites, one of which is a special position (0,0,0), two sulfur sites, and one lithium site. The atoms Pd2/Pt2 form isolated square planar PdS4/PtS4 units, whereas the Pd1/Pt1 atoms form pairs of square planar PdS4/PtS4 units, which are connected via a common edge. These two structural motives built up a three-dimensional network structure by linking through common corners. The lithium atoms are positioned inside of the so formed channels. Li2M3S4 (M=Pd, Pt) are isostructural to the minerals jaguéite, Cu2Pd3Se4 and chrisstanleyite, Ag2Pd3Se4, which are up to now the only representatives of this structure type. Both compounds were studied with respect to their magnetic properties and can be classified as Pauli paramagnetic or diamagnetic. Regarding the possibility of lithium mobility inside the channels, of the structure, solid state 7Li NMR and high-temperature single crystal investigations revealed localization of the lithium atoms on their crystallographic sites.

  11. Ceramic synthesis of 0.08BiGaO3-0.90BaTiO3-0.02LiNbO3 under high pressure and high temperature

    Science.gov (United States)

    Hui, Jin; Yong, Li; Mou-Sheng, Song; Lin, Chen; Xiao-Peng, Jia; Hong-An, Ma

    2016-07-01

    In this paper, the preparation of 0.08BiGaO3-0.90BaTiO3-0.02LiNbO3 is investigated at pressure 3.8 GPa and temperature 1100-1200 °C. Experimental results indicate that not only is the sintered rate more effective, but also the sintered temperature is lower under high pressure and high temperature than those of under normal pressure. It is thought that the adscititious pressure plays the key role in this process, which is discussed in detail. The composition and the structure of the as-prepared samples are recorded by XRD patterns. The result shows that the phases of BaTiO3, BaBiO2.77, and Ba2Bi4Ti5O18 with piezoelectric ceramic performance generate in the sintered samples. Furthermore, the surface morphology characteristics of the typical samples are also investigated using a scanning electron microscope. It indicates that the grain size and surface structure of the samples are closely related to the sintering temperature and sintering time. It is hoped that this study can provide a new train of thought for the preparation of lead-free piezoelectric ceramics with excellent performance. Project supported by the National Natural Science Foundation of China (Grant No. 51172089), the Natural Science Foundation of Education Department of Guizhou Province, China (Grant Nos. KY [2013]183 and LH [2015]7232), and the Research Fund for the Doctoral Program of Tongren University, China (Grant No. DS1302).

  12. An establish attempt of reasons of machining splinter formation in AC47000 alloy high pressure die castings

    Directory of Open Access Journals (Sweden)

    J. Mutwil

    2008-10-01

    Full Text Available A problem of splinter formation during machining the AC47000 alloy high pressure die casting has been experimental investigated. Inorder to establish the reason of this occurrence a set of 200 high pressure die casting of the tensile strength samples have been prepared. The tensile tests were carried out using a Zwick Z050 universal testing machine. JM-SPC program has been used for statistical analysis of test results. A large variability of tensile strength results has been found. In order to find the reason of this variability the fracture surfaceinvestigations (macrographs for all of samples and SEM micrographs for chosen samples have been carried out. It has been establish thatin all cases a significant decrease of tensile strength was caused by presence of inclusions or porosity.

  13. An establish attempt of reasons of machining splinter formation in AC44200 alloy high pressure die castings

    Directory of Open Access Journals (Sweden)

    J. Mutwil

    2008-10-01

    Full Text Available A problem of splinter formation during machining the AC44200 alloy high pressure die casting has been experimental investigated. Inorder to establish the reason of this occurrence a set of 200 high pressure die casting of the tensile strength samples have been prepared. The tensile tests were carried out using a Zwick Z050 universal testing machine. JM-SPC program has been used for statistical analysis of test results. A large variability of tensile strength results has been found. In order to find the reason of this variability the fracture surface investigations (macrographs for all of samples and SEM micrographs for chosen samples have been carried out. It has been establish that in all cases a significant decrease of tensile strength was caused by presence of inclusions or porosity. In lot of cases the inclusions have a form of oxide film.

  14. Kinetics of microstructure formation of high-pressure induced gel from a whey protein isolate

    Energy Technology Data Exchange (ETDEWEB)

    He Jinsong; Yang Hongwei; Zhu Wanpeng [Department of Environmental Science and Engineering, Tsinghua University, Beijing 100084 (China); Mu Taihua, E-mail: mutaihuacaas@126.co [Institute of Agro-Food Science and Technology, Chinese Academy of Agricultural Sciences, Beijing 100094 (China)

    2010-03-01

    The kinetic process of pressure-induced gelation of whey protein isolate (WPI) solutions was studied using in situ light scattering. The relationship of the logarithm of scattered light intensity (I) versus time (t) was linear after the induced time and could be described by the Cahn-Hilliard linear theory. With increasing time, the scattered intensity deviated from the exponential relationship, and the time evolution of the scattered light intensity maximum I{sub m} and the corresponding wavenumber q{sub m} could be described in terms of the power-law relationship as I{sub m}{approx}f{sup {beta}} and q{sub m}{approx}f{sup -}{alpha}, respectively. These results indicated that phase separation occurred during the gelation of WPI solutions under high pressure.

  15. Kinetics of microstructure formation of high-pressure induced gel from a whey protein isolate

    Science.gov (United States)

    He, Jin-Song; Yang, Hongwei; Zhu, Wanpeng; Mu, Tai-Hua

    2010-03-01

    The kinetic process of pressure-induced gelation of whey protein isolate (WPI) solutions was studied using in situ light scattering. The relationship of the logarithm of scattered light intensity (I) versus time (t) was linear after the induced time and could be described by the Cahn-Hilliard linear theory. With increasing time, the scattered intensity deviated from the exponential relationship, and the time evolution of the scattered light intensity maximum Im and the corresponding wavenumber qm could be described in terms of the power-law relationship as Im~fβ and qm~f-α, respectively. These results indicated that phase separation occurred during the gelation of WPI solutions under high pressure.

  16. Biogenic amines formation in high-pressure processed pike flesh (Esox lucius) during storage.

    Science.gov (United States)

    Křížek, Martin; Matějková, Kateřina; Vácha, František; Dadáková, Eva

    2014-05-15

    The effects of vacuum packaging followed by high pressure processing on the shelf-life of fillets of pike (Esox lucius) were examined. Samples were pressure-treated at 300 and 500 MPa and stored at 3.5 and 12 °C for up to 70 days. The content of eight biogenic amines (putrescine, cadaverine, spermidine, spermine, histamine, tyramine, tryptamine and phenylethylamine) were determined. Putrescine showed very good correspondence with the level of applied pressure and organoleptic properties. Polyamines spermidine and spermine did not show statistically significant changes with the level of applied pressure and the time of storage. Increased cadaverine and tyramine contents were found in samples with good sensory signs, stored for longer time and/or kept at 12 °C, thus indicating the loss of freshness. Tryptamine and phenylethylamine were not detected in pressure-treated samples kept at 3.5 °C. Histamine was not detected in samples of good quality.

  17. Rapidly-deposited polydopamine coating via high temperature and vigorous stirring: formation, characterization and biofunctional evaluation.

    Directory of Open Access Journals (Sweden)

    Ping Zhou

    Full Text Available Polydopamine (PDA coating provides a promising approach for immobilization of biomolecules onto almost all kinds of solid substrates. However, the deposition kinetics of PDA coating as a function of temperature and reaction method is not well elucidated. Since dopamine self-polymerization usually takes a long time, therefore, rapid-formation of PDA film becomes imperative for surface modification of biomaterials and medical devices. In the present study, a practical method for preparation of rapidly-deposited PDA coating was developed using a uniquely designed device, and the kinetics of dopamine self-polymerization was investigated by QCM sensor system. It was found that high temperature and vigorous stirring could dramatically speed up the formation of PDA film on QCM chip surface. Surface characterization, BSA binding study, cell viability assay and antibacterial test demonstrates that the polydopamine coating after polymerization for 30 min by our approach exhibits similar properties to those of 24 h counterpart. The method has a great potential for rapid-deposition of polydopamine films to modify biomaterial surfaces.

  18. Rapidly-deposited polydopamine coating via high temperature and vigorous stirring: formation, characterization and biofunctional evaluation.

    Science.gov (United States)

    Zhou, Ping; Deng, Yi; Lyu, Beier; Zhang, Ranran; Zhang, Hai; Ma, Hongwei; Lyu, Yalin; Wei, Shicheng

    2014-01-01

    Polydopamine (PDA) coating provides a promising approach for immobilization of biomolecules onto almost all kinds of solid substrates. However, the deposition kinetics of PDA coating as a function of temperature and reaction method is not well elucidated. Since dopamine self-polymerization usually takes a long time, therefore, rapid-formation of PDA film becomes imperative for surface modification of biomaterials and medical devices. In the present study, a practical method for preparation of rapidly-deposited PDA coating was developed using a uniquely designed device, and the kinetics of dopamine self-polymerization was investigated by QCM sensor system. It was found that high temperature and vigorous stirring could dramatically speed up the formation of PDA film on QCM chip surface. Surface characterization, BSA binding study, cell viability assay and antibacterial test demonstrates that the polydopamine coating after polymerization for 30 min by our approach exhibits similar properties to those of 24 h counterpart. The method has a great potential for rapid-deposition of polydopamine films to modify biomaterial surfaces.

  19. Rapidly-Deposited Polydopamine Coating via High Temperature and Vigorous Stirring: Formation, Characterization and Biofunctional Evaluation

    Science.gov (United States)

    Zhou, Ping; Deng, Yi; Lyu, Beier; Zhang, Ranran; Zhang, Hai; Ma, Hongwei; Lyu, Yalin; Wei, Shicheng

    2014-01-01

    Polydopamine (PDA) coating provides a promising approach for immobilization of biomolecules onto almost all kinds of solid substrates. However, the deposition kinetics of PDA coating as a function of temperature and reaction method is not well elucidated. Since dopamine self-polymerization usually takes a long time, therefore, rapid-formation of PDA film becomes imperative for surface modification of biomaterials and medical devices. In the present study, a practical method for preparation of rapidly-deposited PDA coating was developed using a uniquely designed device, and the kinetics of dopamine self-polymerization was investigated by QCM sensor system. It was found that high temperature and vigorous stirring could dramatically speed up the formation of PDA film on QCM chip surface. Surface characterization, BSA binding study, cell viability assay and antibacterial test demonstrates that the polydopamine coating after polymerization for 30 min by our approach exhibits similar properties to those of 24 h counterpart. The method has a great potential for rapid-deposition of polydopamine films to modify biomaterial surfaces. PMID:25415328

  20. Biogenic amine formation and nitrite reactions in meat batter as affected by high-pressure processing and chilled storage.

    Science.gov (United States)

    Ruiz-Capillas, C; Aller-Guiote, P; Carballo, J; Colmenero, F Jiménez

    2006-12-27

    Changes in biogenic amine formation and nitrite depletion in meat batters as affected by pressure-temperature combinations (300 MPa/30 min/7, 20, and 40 degrees C), cooking process (70 degrees C/30 min), and storage (54 days/2 degrees C) were studied. Changes in residual nitrite concentration in raw meat batters were conditioned by the temperature and not by the pressure applied. Cooking process decreased (P < 0.05) the residual nitrite concentration in all samples. High-pressure processing and cooking treatment increased (P < 0.05) the nitrate content. Whereas protein-bound nitrite concentration decreased with pressure processing, no effect was observed with the heating process of meat batters. High-pressure processing conditions had no effect on the rate of residual nitrite loss throughout the storage. The application of high pressure decreased (P < 0.05) the concentration of some biogenic amines (tyramine, agmatine, and spermine). Irrespective of the high processing conditions, generally, throughout storage biogenic amine levels did not change or increased, although quantitatively this effect was not very important.

  1. Formation of High Temperature Compounds in W-C-B System by Reactive Spark Plasma Sintering

    Directory of Open Access Journals (Sweden)

    Janis Grabis

    2015-09-01

    Full Text Available The formation of high temperature composites in W-C-Bsystem from fine-grained powders in dependence on the ratio of components byusing reactive spark plasma sintering was studied. The mixture of W2Cand C nanoparticles was used as tungsten and carbon precursors. The W2Cand carbon mixture with different ratio of components was prepared by reductionof WO3 in presence of CH4 in nitrogen inductively coupledplasma. The specific surface area of the mixture was in the range of 36–42 m2/gin dependence on the content of carbon. The W2C and carbon particleswere mixed mechanically with amorphous boron and densified using the sparkplasma sintering technique at 1500–1700 oC and pressure of 30 MPafor 4 minutes. The sintered bodies contained WB2 and B4Cphases. The ratio of phase depends on the content of the components in the rawmixture.DOI: http://dx.doi.org/10.5755/j01.ms.21.3.7352

  2. In situ High-pressure NMR Observations on the Formation and Dissociation of Methane Hydrate

    Institute of Scientific and Technical Information of China (English)

    Ai Bing CHEN; Wei Ping ZHANG; Xi Jie LAN; Heng ZHENG; Xiu Mei LIU; Xiu Wen HAN; Xin He BAO

    2006-01-01

    A home-made static NMR cell with pressure up to 10 MPa was employed to observe the formation and dissociation processes of methane hydrate by in situ 1H and 13C NMR spectroscopies. Methane hydrate can be formed or decomposed in the temperature range of -5 to-13℃ at pressures between 4.0 and 7.0 MPa. The higher methane pressure, the formation or dissociation temperature of methane hydrate was higher. In situ 1H NMR experiments indicated that the critical size of the hydrate clusters is crucial for the formation of methane hydrate.

  3. 高温高压环境下13Cr不锈钢的腐蚀性能%Corrosion Performance of 13Cr Stainless Steel in High Temperature and High Pressure Environments

    Institute of Scientific and Technical Information of China (English)

    牛坤; 赵国仙; 张国超; 蔡文婷

    2012-01-01

    采用高温高压釜研究了110钢级13Cr不锈钢在模拟油气田腐蚀环境气、液相条件下的腐蚀行为,利用SEM、XRD及EDS等对表面腐蚀产物形貌及成分进行了分析。结果表明,气、液两相环境下,13Cr材料腐蚀速率均随温度的升高而在150℃左右达到最大值,且气相腐蚀速率均大于液相。液相环境中13Cr钢主要发生均匀腐蚀,局部腐蚀较为轻微,气相则主要发生点蚀;气、液两相条件下材料的点蚀速率均大于均匀腐蚀速率。13Cr不锈钢在两相条件下的腐蚀产物膜的主要成分为Fe-Cr化合物;元素Cr主要以Cr2O3的形式存在于腐蚀产物膜中。%The corrosion behaviors of 13Cr stainless steel of 110 steel grade,13Cr 110,were studied by high temperature and high pressure corrosion tests in gas and liquid states of simulated oilfield corrosion environments.The corrosion product scale was analyzed by scanning electron microscopy,energy dispersive X-ray spectrometer,X-ray diffraction and X-ray photoelectron spectroscopy.The results show that the corrosion rate of the materials increased with increasing the temperature and reached their maximum values in both gas-plase and liquid phase;The corrosion rate in gas was greater than in liquid.The corrosion mode of 13Cr110 steel in liquid was mainly uniform corrosion and a little localized corrosion,in the gas was mainly pitting.Pitting corrosion rate of materials was greater than the uniform rate was in both gas phase and liquid phase.The main composition of corrosion scale of 13Cr110 stainless was Fe-Cr compound;Element Cr was mainly in the form of Cr2O3 in the corrosion product scale.

  4. Phase Transition of γ-Si3N4 Under High Pressure and High Temperature%高温高压下γ-Si3N4的相变

    Institute of Scientific and Technical Information of China (English)

    姚怀; 徐巧玉; 朱广林

    2013-01-01

    为了研究γ-Si3N4在高温高压下的相变,在压力为5.2、5.4及5.7 GPa,温度为1 300~1 450 K,保温时间为15min条件下,以Y2O3、Al2O3和La2O3为烧结助剂,制备了γ-Si3N4烧结体.用X射线衍射和扫描电子显微镜对烧结样品进行了分析和观察.结果表明:γ-Si3N4首先转变为α-Si3N4,再由α-Si3N4转变为β-Si3N4; β-Si3N4烧结体主要由长柱状的晶粒组成,晶粒相互连接,呈交叉分布,显微结构较为均匀,结构致密.拟合了三相相界方程,得到了n γ+α、α、α+β、β-Si3N4相界方程,并讨论了相关的相变机制.%In order to investigate the phase transition of γ-Si3N4 under high pressure and high temperature, γ-Si3N4 was sintered with Y2O3, A12O3 and La2O3 as additives at 5.2, 5.4 and 5.7 GPa and 1300-1450 K for 15min, respectively. The sintered samples were analyzed by X-ray diffraction and scanning electron microscopy. The results show that the γ-Si3N4 powder is firstly transformed into α-Si3N4, and then α-Si3N4 is transformed into β-Si3N4. When the γ-Si3N4 powder was completely transformed into β-Si3N4, the sintered samples were mainly composed of the elongated rod crystals with the interconnected and cross distribution, and had the more uniformity and compact microstructure. The rough boundary equations of γ, γ+α, α,α+β and β could be used to fit the experimental data, respectively. In addition, the related mechanism of phase transformation was also discussed.

  5. Brillouin Scattering Study on Molecular Liquid under High Pressure and High Temperature Conditions%小分子液体的高温布里渊散射研究

    Institute of Scientific and Technical Information of China (English)

    马春丽; 武晓鑫; 黄凤仙; 李敏; 王晓霞; 周强; 李芳菲; 崔启良

    2015-01-01

    High-pressure and high-temperature Brillouin scattering studies have been performed on molecular liquids,including water (H2O),ammonia (NH3),ammonia dihydrate (NH3·2H2O)and methane (CH4)by using a diamond anvil cell (DAC).The acoustic velocity and adiabatic bulk modulus have been determined from measured Brillouin frequency shifts in both 180° and 60° scattering geometries under pressure up to freezing point,along room temperature (296 K)and high temperature (410 K)isotherms,and the pressure dependence of acoustic velocity and adiabatic bulk modulus were compared in different molecular systems.The acoustic velocities increase smoothly with the increasing pressure,methane possesses the highest velocity increasement and the lowest adiabatic bulk modulus under similar pressure and temperature,indicating the hydrogen bond impact on elasticity in these liquids.A change in the slope of pressure dependence of the bulk modulus in liquid ammonia dihydrate was observed around 1 .5 GPa,suggesting a possible structure change in liquid and analysing the effect of hydrogen on elasticity.This study improves our understanding of the pressure-and temperature-induced molecular structure changes in other molecular liquid systems.%利用金刚石对顶砧技术,采用180°背向散射和60°前向对称散射两种几何配置,对水、氨、二水合氨和甲烷等含氢小分子液体进行了高温高压布里渊散射研究,计算了在室温(296 K)和高温(410 K)下的声速,比较了不同小分子液体中的声速及绝热体弹模量随压力的变化关系。在等温条件下,各体系中声速随着压力的增加逐渐增加;在相同温度下,甲烷液体的声速随着压力增加的速率明显高于水、氨及二水合氨液体;在相同的温度和压力条件下,水、氨及二水合氨液体的体弹模量明显高于甲烷液体的体弹模量,表明氢键的存在对于小分子液体弹性具有较大影响。二水合氨的体

  6. TRANSFORMATIONS IN NANO-DIAMONDS WITH FORMATION OF NANO-POROUS SILICON CARBIDE AT HIGH PRESSURE

    Directory of Open Access Journals (Sweden)

    V. N. Kovalevsky

    2010-01-01

    Full Text Available The paper contains investigations on regularities of diamond - silicon carbide composite structure formation at impact-wave excitation. It has been determined that while squeezing a porous blank containing Si (SiC nano-diamond by explosive detonation products some processes are taking place such as diamond nano-particles consolidation, reverse diamond transition into graphite, fragments formation from silicon carbide. A method for obtaining high-porous composites with the presence of ultra-disperse diamond particles has been developed. Material with three-dimensional high-porous silicon-carbide structure has been received due to nano-diamond graphitation at impact wave transmission and plastic deformation. The paper reveals nano-diamonds inverse transformation into graphite and its subsequent interaction with the silicon accompanied by formation of silicon-carbide fragments with dimensions of up to 100 nm.

  7. Formation and stability of D-limonene organogel-based nanoemulsion prepared by a high-pressure homogenizer.

    Science.gov (United States)

    Zahi, Mohamed Reda; Wan, Pingyu; Liang, Hao; Yuan, Qipeng

    2014-12-31

    D-limonene organogel-based nanoemulsion was prepared by high-pressure homogenization technology. The organogelator type had a major role on the formation of the formulations, in which stearic acid has given nanoemulsions with the smallest droplet size. The surfactant type and concentration also had an appreciable effect on droplet formation, with Tween 80 giving a mean droplet diameter (d ≈ 112 nm) among a range of non-ionic surfactants (Tween 20, 40, 60, 80, and 85). In addition, high-pressure homogenization conditions played a key role in the nanoemulsion preparation. The stability of d-limonene organogel-based nanoemulsion was also investigated under two different temperatures (4 and 28 °C) through 2 weeks of storage. Results showed a good stability of the formulations, which is maybe due to the incorporation of D-limonene into the organogel prior to homogenization. This study may have a valuable contribution for the design and use of organogel-based nanoemulsion as a delivery system in food.

  8. Subnanosecond processes in the stage of breakdown formation in gas at a high pressure

    Science.gov (United States)

    Korolev, Yu. D.; Bykov, N. M.; Ivanov, S. N.

    2008-12-01

    Results are presented from experimental studies of the prebreakdown stage of a discharge in nitrogen at pressures of a few tens of atmospheres, gap voltages higher than 140 kV, and a voltage rise time of about 1 ns. Breakdown occurs at the front of the voltage pulse; i.e., the time of breakdown formation is shorter than the front duration. It is shown that, in gaps with a nonuniform electric field, the breakdown formation time is mainly determined by the time of avalanche development to the critical number of charge carriers. The subsequent stages of breakdown (the development of the ionization wave and the buildup of the conductivity in the weakly conducting channel bridging the gap) turn out to be shorter than this time or comparable to it.

  9. Star Formation in High Pressure, High Energy Density Environments: Laboratory Experiments of ISM Dust Analogs

    Energy Technology Data Exchange (ETDEWEB)

    van Breugel, W; Bajt, S; Bradley, J; Bringa, E; Dai, Z; Felter, T; Graham, G; Kucheyev, S; Torres, D; Tielens, A; Baragiola, R; Dukes, C; Loeffler, M

    2005-01-05

    Dust grains control the chemistry and cooling, and thus the gravitational collapse of interstellar clouds. Energetic particles, shocks and ionizing radiation can have a profound influence on the structure, lifetime and chemical reactivity of the dust, and therefore on the star formation efficiency. This would be especially important in forming galaxies, which exhibit powerful starburst (supernovae) and AGN (active galactic nucleus) activity. How dust properties are affected in such environments may be crucial for a proper understanding of galaxy formation and evolution. The authors present the results of experiments at LLNL which show that irradiation of the interstellar medium (ISM) dust analog forsterite (Mg{sub 2}SiO{sub 4}) with swift heavy ions (10 MeV Xe) and a large electronic energy deposition amorphizes its crystalline structure, without changing its chemical composition. From the data they predict that silicate grains in the ISM, even in dense and cold giant molecular clouds, can be amorphized by heavy cosmic rays (CR's). This might provide an explanation for the observed absence of crystalline dust in the ISM clouds of the Milky Way galaxy. This processing of dust by CR's would be even more important in forming galaxies and galaxies with active black holes.

  10. Three dimensional simulations of pattern formation during high-pressure, freely localized microwave breakdown in air

    Energy Technology Data Exchange (ETDEWEB)

    Kourtzanidis, K., E-mail: Konstantinos.Kourtzanidis@onera.fr; Boeuf, J. P. [LAPLACE (Laboratoire Plasma et Conversion d' Energie), Université de Toulouse, UPS, INPT, 118 route de Narbonne, F-31062 Toulouse Cedex 9 (France); Rogier, F. [ONERA - The French Aerospace Lab, 2 Avenue édouard Belin, 31000 Toulouse (France)

    2014-12-15

    Recent experiments have demonstrated that a freely localized 100 GHz microwave discharge can propagate towards the microwave source with high speed, forming a complex pattern of self-organized filaments. We present three-dimensional simulations of the formation and propagation of such patterns that reveal more information on their nature and interaction with the electromagnetic waves. The developed three-dimensional Maxwell-plasma solver permits the study of different forms of incident field polarization. Results for linear and circular polarization of the wave are presented and comparisons with recent experiments show a good overall agreement. The three dimensional simulations provide a quantitative analysis of the parameters controlling the time and length scales of the strongly non-linear plasma dynamics and could be useful for potential microwave plasma applications such as aerodynamic flow and combustion control.

  11. Laser-driven formation of a high-pressure phase in amorphous silica

    Energy Technology Data Exchange (ETDEWEB)

    Salleo, Alberto; Taylor, Seth T.; Martin, Michael C.; Panero, Wendy R.; Jeanloz, Raymond; Genin, Francois Y.; Sands, Timothy

    2002-05-31

    A combination of electron diffraction and infrared reflectance measurements shows that synthetic silica transforms partially into stishovite under high-intensity (GW/cm2) laser irradiation, probably by the formation of a dense ionized plasma above the silica surface. During the transformation the silicon coordination changes from four-fold to six-fold and the silicon-oxygen bond changes from mostly covalent to mostly ionic, such that optical properties of the transformed material differ significantly from those of the original glass. This phase transformation offers one suitable mechanism by which laser-induced damage grows catastrophically once initiated, thereby dramatically shortening the service lifetime of optics used for high-power photonics applications such as inertial confinement fusion.

  12. 高温高压转化合成丹酚酸A的工艺研究%Process of salvianolic acid A production from Salvia miltiorrhiza extract at high temperature and high pressure

    Institute of Scientific and Technical Information of China (English)

    王颖; 朱靖博; 付绍平; 张凯璞; 张毅

    2011-01-01

    The yield of salvianolic acid A was improved by conversion of salvinolic acids at high temperature and high pressure. With the yield of salvianolic acid A as the index, the effect of acids, the content of salvianolic acid B in salvinolic acids extracts, reaction time, reaction temperature, pH value and the concentration of raw material were investigated. The content of salvianolic acid A was determined by HPLC, in which Kromasil C18(250 mm X 4. 6 mm, 5 μm) column was applied, using water (0.1% formic acid) and acetonitrile as mobile phase with a flow rate of 1 mL/min, and the injection volume was 20 μL for each analysis and detection wavelength was set at 280 nm. The results showed that the linear range of calibration curve was 0. 055-0. 55 mg/mL. On the basis of the results of single factor experiment and orthogonal experiment, the optimal reaction conditions were as follows: with pH value 5, the concentration of salvinolic acids extracts was 5 mg/mL, and the reaction was performed at 120 ℃ for 4 h.%采用高温高压处理丹酚酸提取物的方法来提高丹酚酸A的含量,以丹酚酸A的得率为指标,通过高效液相色谱法测定丹酚酸A的含量,考察了酸的种类、丹酚酸提取物中丹酚酸B的含量、反应时间、反应温度、pH、物料浓度对转化合成丹酚酸A的影响.色谱分析条件为:色谱柱Kromasil C18(250 mm×4.6 mm,5 μm),流动相为水(0.1%甲酸)和乙腈,体积流量1 mL/min,进样量20μL,检测波长280 nm,丹酚酸A的质量浓度在0.055~0.55 mg/mL线性关系良好.通过单因素考察及正交试验得到了转化合成丹酚酸A的最佳工艺条件为:反应时间4h,反应温度120℃,pH为5,反应物料质量浓度5 mg/mL.

  13. Implications for Core Formation of the Earth from High Pressure-Temperature Au Partitioning Experiments

    Science.gov (United States)

    Danielson, L. R.; Sharp, T. G.; Hervig, R. L.

    2005-01-01

    Siderophile elements in the Earth.s mantle are depleted relative to chondrites. This is most pronounced for the highly siderophile elements (HSEs), which are approximately 400x lower than chondrites. Also remarkable is the relative chondritic abundances of the HSEs. This signature has been interpreted as representing their sequestration into an iron-rich core during the separation of metal from silicate liquids early in the Earth's history, followed by a late addition of chondritic material. Alternative efforts to explain this trace element signature have centered on element partitioning experiments at varying pressures, temperatures, and compositions (P-T-X). However, first results from experiments conducted at 1 bar did not match the observed mantle abundances, which motivated the model described above, a "late veneer" of chondritic material deposited on the earth and mixed into the upper mantle. Alternatively, the mantle trace element signature could be the result of equilibrium partitioning between metal and silicate in the deep mantle, under P-T-X conditions which are not yet completely identified. An earlier model determined that equilibrium between metal and silicate liquids could occur at a depth of approximately 700 km, 27(plus or minus 6) GPa and approximately 2000 (plus or minus 200) C, based on an extrapolation of partitioning data for a variety of moderately siderophile elements obtained at lower pressures and temperatures. Based on Ni-Co partitioning, the magma ocean may have been as deep as 1450 km. At present, only a small range of possible P-T-X trace element partitioning conditions has been explored, necessitating large extrapolations from experimental to mantle conditions for tests of equilibrium models. Our primary objective was to reduce or remove the additional uncertainty introduced by extrapolation by testing the equilibrium core formation hypothesis at P-T-X conditions appropriate to the mantle.

  14. Embryoid Formation by High Temperature Treatment from Multiple Shoots of Panax ginseng1.

    Science.gov (United States)

    Asaka, I; Li, I; Yoshikawa, T; Hirotani, M; Furuya, T

    1993-08-01

    We developed a new technology to induce embryoids by a moderate high temperature treatment from multiple shoots of PANAX GINSENG (Araliaceae). The number of formed embryoids was 10 times higher than that of untreated tissue. Normal plantlets were regenerated from the embryoids by transplanting them on a hormone-free medium. They contained ginsenosides Rb (1), Rg (1) and the other saponins as well as those of natural ginseng.

  15. Determination of the heat of hydride formation/decomposition by high-pressure differential scanning calorimetry (HP-DSC).

    Science.gov (United States)

    Rongeat, Carine; Llamas-Jansa, Isabel; Doppiu, Stefania; Deledda, Stefano; Borgschulte, Andreas; Schultz, Ludwig; Gutfleisch, Oliver

    2007-11-22

    Among the thermodynamic properties of novel materials for solid-state hydrogen storage, the heat of formation/decomposition of hydrides is the most important parameter to evaluate the stability of the compound and its temperature and pressure of operation. In this work, the desorption and absorption behaviors of three different classes of hydrides are investigated under different hydrogen pressures using high-pressure differential scanning calorimetry (HP-DSC). The HP-DSC technique is used to estimate the equilibrium pressures as a function of temperature, from which the heat of formation is derived. The relevance of this procedure is demonstrated for (i) magnesium-based compounds (Ni-doped MgH2), (ii) Mg-Co-based ternary hydrides (Mg-CoHx) and (iii) Alanate complex hydrides (Ti-doped NaAlH4). From these results, it can be concluded that HP-DSC is a powerful tool to obtain a good approximation of the thermodynamic properties of hydride compounds by a simple and fast study of desorption and absorption properties under different pressures.

  16. On the Experimental and Theoretical Investigations of Lean Partially Premixed Combustion, Burning Speed, Flame Instability and Plasma Formation of Alternative Fuels at High Temperatures and Pressures

    Science.gov (United States)

    Askari, Omid

    This dissertation investigates the combustion and injection fundamental characteristics of different alternative fuels both experimentally and theoretically. The subjects such as lean partially premixed combustion of methane/hydrogen/air/diluent, methane high pressure direct-injection, thermal plasma formation, thermodynamic properties of hydrocarbon/air mixtures at high temperatures, laminar flames and flame morphology of synthetic gas (syngas) and Gas-to-Liquid (GTL) fuels were extensively studied in this work. These subjects will be summarized in three following paragraphs. The fundamentals of spray and partially premixed combustion characteristics of directly injected methane in a constant volume combustion chamber have been experimentally studied. The injected fuel jet generates turbulence in the vessel and forms a turbulent heterogeneous fuel-air mixture in the vessel, similar to that in a Compressed Natural Gas (CNG) Direct-Injection (DI) engines. The effect of different characteristics parameters such as spark delay time, stratification ratio, turbulence intensity, fuel injection pressure, chamber pressure, chamber temperature, Exhaust Gas recirculation (EGR) addition, hydrogen addition and equivalence ratio on flame propagation and emission concentrations were analyzed. As a part of this work and for the purpose of control and calibration of high pressure injector, spray development and characteristics including spray tip penetration, spray cone angle and overall equivalence ratio were evaluated under a wide range of fuel injection pressures of 30 to 90 atm and different chamber pressures of 1 to 5 atm. Thermodynamic properties of hydrocarbon/air plasma mixtures at ultra-high temperatures must be precisely calculated due to important influence on the flame kernel formation and propagation in combusting flows and spark discharge applications. A new algorithm based on the statistical thermodynamics was developed to calculate the ultra-high temperature plasma

  17. Evaporation and Vapor Formation of Graphite Suspensions Based on Water in a High-Temperature Gas Environment: an Experimental Investigation

    Directory of Open Access Journals (Sweden)

    Borisova Anastasia G.

    2016-01-01

    Full Text Available We performed an experimental research on evaporation and vapor formation of water droplets containing large (2 mm in size and small (0.05 mm and 0.2 mm in diameter graphite inclusions, when heated in a high-temperature gas environment. We applied a high-speed (up to 104 fps video recording to establish mechanisms of the processes considered. Moreover, we revealed the positive influence of addition of small graphite inclusions on intensifying the evaporation of heterogeneous suspension droplets. In addition, we made the assumption on the formation of vapor layer around the 10 and 15 μl suspension droplets, as well as its negative influence on the lifetimes of suspension droplets τh (increasing the times in a high-temperature gas environment.

  18. High-Temperature Mineral Formation by Short Circuits in Protoplanetary Disks

    Science.gov (United States)

    Mac Low, Mordecai-Mark; Hubbard, A.; McNally, C.; Ebel, D.; D'Alessio, P.

    2013-01-01

    Intermittent heating of solid materials in protoplanetary disks is attested to by meteoritical components such as chondrules and calcium-aluminum inclusions, by the presence of high temperature minerals in comet dust sampled by the Stardust mission, and by the observation of crystalline silicates at substantial radii in disks around young stars. Such heating requires an energy source and a physical mechanism to explain it. One plausible energy source is the differential rotation of a Keplerian disk. In most models of protoplanetary disks, this energy drives magnetized turbulence through magnetorotational instability everywhere outside of a transient dead zone. Magnetized turbulence very generally forms current sheets as energy cascades to smaller scales. In resistive media such as the gas in disks, these currents act as a heating source. The density of charge carriers in cold disks is too low for these currents to raise the gas to rock-melting temperatures immediately. However, temperatures can be raised to the range of 1000 K, sufficient to being ionizing alkali metals, locally decreasing the resistivity and increasing the turbulence. This triggers an exponential instability, leading to a narrow sheet of highly ionized, high temperature gas. The strongly varying resistivity acts as an anti-diffusive term in the induction equation, concentrating field in the sheet. Preliminary calculations using a one-dimensional simulation including both non-ideal MHD and radiative transfer suggest that rock-melting or vaporizing temperatures above 1800 K can easily be reached in these sheets. This could provide a widespread, intermittent, heating mechanism in protoplanetary disks sufficient to produce the observed high-temperature minerals.

  19. Highly siderophile element (HSE) abundances in the mantle of Mars are due to core formation at high pressure and temperature

    Science.gov (United States)

    Righter, K.; Danielson, L. R.; Pando, K. M.; Williams, J.; Humayun, M.; Hervig, R. L.; Sharp, T. G.

    2015-04-01

    Highly siderophile elements (HSEs) can be used to understand accretion and core formation in differentiated bodies, due to their strong affinity for FeNi metal and sulfides. Coupling experimental studies of metal-silicate partitioning with analyses of HSE contents of Martian meteorites can thus offer important constraints on the early history of Mars. Here, we report new metal-silicate partitioning data for the PGEs and Au and Re across a wide range of pressure and temperature space, with three series designed to complement existing experimental data sets for HSE. The first series examines temperature effects for D(HSE) in two metallic liquid compositions—C-bearing and C-free. The second series examines temperature effects for D(Re) in FeO-bearing silicate melts and FeNi-rich alloys. The third series presents the first systematic study of high pressure and temperature effects for D(Au). We then combine our data with previously published partitioning data to derive predictive expressions for metal-silicate partitioning of the HSE, which are subsequently used to calculate HSE concentrations of the Martian mantle during continuous accretion of Mars. Our results show that at midmantle depths in an early magma ocean (equivalent to approximately 14 GPa, 2100 °C), the HSE contents of the silicate fraction are similar to those observed in the Martian meteorite suite. This is in concert with previous studies on moderately siderophile elements. We then consider model calculations that examine the role of melting, fractional crystallization, and sulfide saturation/undersaturation in establishing the range of HSE contents in Martian meteorites derived from melting of the postcore formation mantle. The core formation modeling indicates that the HSE contents can be established by metal-silicate equilibrium early in the history of Mars, thus obviating the need for a late veneer for HSE, and by extension volatile siderophile elements, or volatiles in general.

  20. H2 formation on PAHs in photodissociation regions: a high-temperature pathway to molecular hydrogen

    CERN Document Server

    Boschman, Leon; Spaans, Marco; Hoekstra, Ronnie; Schlathölter, Thomas

    2015-01-01

    Molecular hydrogen is the most abundant molecule in the Universe. It is thought that a large portion of H2 forms by association of hydrogen atoms to polycyclic aromatic hydrocarbons (PAHs). We model the influence of PAHs on total H2 formation rates in photodissociation regions (PDRs) and assess the effect of these formation rates on the total cloud structure. We set up a chemical kinetic model at steady state in a PDR environment and included adiative transfer to calculate the chemistry at different depths in the PDR. This model includes known dust grain chemistry for the formation of H2 and a H2 formation mechanism on PAHs. Since H2 formation on PAHs is impeded by thermal barriers, this pathway is only efficient at higher temperatures (T > 200 K). At these temperatures the conventional route of H2 formation via H atoms physisorbed on dust grains is no longer feasible, so the PAH mechanism enlarges the region where H2 formation is possible. We find that PAHs have a significant influence on the structure of PD...

  1. Possible formation of high temperature superconductor at an early stage of heavy-ion collisions

    Science.gov (United States)

    Liu, Hao; Yu, Lang; Chernodub, Maxim; Huang, Mei

    2016-12-01

    We investigate the effect of the inverse magnetic catalysis (IMC) on charged ρ meson condensation at finite temperature in the framework of the Nambu-Jona-Lasinio model, where mesons are calculated to the leading order of 1 /Nc expansion. The IMC for chiral condensate has been considered using three different approaches: incorporating the chiral condensate from lattice data, using the running coupling constant, and introducing the chiral chemical potential, respectively. It is observed that with no IMC effect included, the critical magnetic field e Bc for charged ρ condensation increases monotonically with the temperature. However, including IMC substantially affects the polarized charged ρ condensation around the critical temperature Tc of the chiral phase transition: first, the critical magnetic field e Bc for the charged ρ condensation decreases with the temperature, reaches its minimum value around Tc, and then increases with the temperature. It is quite surprising that the charged ρ can condense above the critical temperature of chiral phase transition with a even smaller critical magnetic field comparing its vacuum value. The Nambu-Jona-Lasinio model calculation shows that in the temperature region of 1 - 1.5 Tc , the critical magnetic field for charged ρ condensation is rather small and in the region of e Bc˜0.15 - 0.3 GeV2 , which suggests that high temperature superconductor might be created through noncentral heavy ion collisions at LHC energies.

  2. Microsoft excel spreadsheets for calculation of P-V-T relations and thermodynamic properties from equations of state of MgO, diamond and nine metals as pressure markers in high-pressure and high-temperature experiments

    Science.gov (United States)

    Sokolova, Tatiana S.; Dorogokupets, Peter I.; Dymshits, Anna M.; Danilov, Boris S.; Litasov, Konstantin D.

    2016-09-01

    We present Microsoft Excel spreadsheets for calculation of thermodynamic functions and P-V-T properties of MgO, diamond and 9 metals, Al, Cu, Ag, Au, Pt, Nb, Ta, Mo, and W, depending on temperature and volume or temperature and pressure. The spreadsheets include the most common pressure markers used in in situ experiments with diamond anvil cell and multianvil techniques. The calculations are based on the equation of state formalism via the Helmholtz free energy. The program was developed using Visual Basic for Applications in Microsoft Excel and is a time-efficient tool to evaluate volume, pressure and other thermodynamic functions using T-P and T-V data only as input parameters. This application is aimed to solve practical issues of high pressure experiments in geosciences and mineral physics.

  3. Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point

    Directory of Open Access Journals (Sweden)

    J. S. Kim

    2015-07-01

    Full Text Available The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K and highly pressurized water (18.9 MPa near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni59Zr20Ti16Si2Sn3 metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO3, ZrTiO4 and ZrSnO4 ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.

  4. Effect of hydrothermal condition on the formation of multi-component oxides of Ni-based metallic glass under high temperature water near the critical point

    Energy Technology Data Exchange (ETDEWEB)

    Kim, J. S.; Lee, M. H., E-mail: mhlee1@kitech.re.kr [Headquarters Bearing Division, Iljin Global Co., Ltd., Seoul 135-875 (Korea, Republic of); Kim, S. Y. [Rare Metals R& D Group, Korea Institute of Industrial Technology, Incheon 406-840 (Korea, Republic of); Kim, D. H. [Center for Noncrystalline Materials, Yonsei University, Seoul 120-749 (Korea, Republic of); Ott, R. T. [Division of Materials and Engineering, Ames Laboratory (US DOE), Ames, Iowa 50011 (United States); Kim, H. G. [LWR Fuel Technology Division, Korea Atomic Energy Institute, Daejeon 305-600 (Korea, Republic of)

    2015-07-15

    The specific feature of multi-component oxides synthesized by hydrothermal process under high temperature (633 K) and highly pressurized water (18.9 MPa) near critical point. Effects of hydrothermal processing duration times 24 hours and 72 hours, respectively, on the oxide formation of the Ni{sub 59}Zr{sub 20}Ti{sub 16}Si{sub 2}Sn{sub 3} metallic glass synthesized by powder metallurgy process were characterized by X-ray diffractometer, differential scanning calorimeter along with the particle size, morphology and crystalline phase of the oxides. The crystallization of the needle-shape NiTiO{sub 3}, ZrTiO{sub 4} and ZrSnO{sub 4} ternary oxide phases observed on the surface of metallic glass at below glass transition temperature and the morphology of oxide phases changed to plate-shape around 2 μm in diameter by the increase processing time. This hydrothermal processing in subcritical water provides accelerated dense metal oxide crystals due to the reaction medium being at higher pressure than conventional oxidation processing.

  5. Effects of Fe(3+) and Antioxidants on Glycidyl Ester Formation in Plant Oil at High Temperature and Their Influencing Mechanisms.

    Science.gov (United States)

    Cheng, Weiwei; Liu, Guoqin; Liu, Xinqi

    2017-05-24

    This research investigated the effects of Fe(3+) and antioxidants on the formation of glycidyl esters (GEs) and the free radical mediated mechanisms involving the recognition of cyclic acyloxonium free radical intermediate (CAFRI) for GE formation in both the plant oil model (palm oil, camellia oil, soybean oil, and linseed oil) system and the chemical model (dipalmitin and methyl linoleate) system heated at 200 °C. Results show that Fe(3+) can promote the formation of GEs, which can be inhibited by antioxidants in plant oil during high-temperature exposure. Based on the monitoring of cyclic acyloxonium and ester carbonyl group by Fourier transform infrared spectroscopy, the promotion of Fe(3+) and the inhibition of antioxidants (tert-butylhydroquinone and α-tocopherol) for GE formation occurred not only through lipid oxidation but also through directly affecting the formation of cyclic acyloxonium intermediate. Additionally, a quadrupole time-of-flight tandem mass spectrometry measurement was conducted to identify the presence of radical adduct captured by 5,5-dimethylpyrroline N-oxide, which provided strong evidence for the formation of CAFRI. Thus, one possible influencing mechanism can be that free radical generated in lipid oxidation may be transferred to dipalmitin and promote CAFRI formation. Fe(3+) can catalyze free radical generation while antioxidants can scavenge free radical, and therefore they also can directly affect CAFRI formation.

  6. H2 formation on PAHs in photodissociation regions: a high-temperature pathway to molecular hydrogen

    NARCIS (Netherlands)

    Boschman, L.; Cazaux, S.; Spaans, M.; Hoekstra, R.; Schlathölter, T.

    2015-01-01

    Aims: Molecular hydrogen is the most abundant molecule in the Universe. It is thought that a large portion of H2 forms by association of hydrogen atoms to polycyclic aromatic hydrocarbons (PAHs). We model the influence of PAHs on total H2 formation rates in photodissociation regions (PDRs) and asses

  7. H-2 formation on PAHs in photodissociation regions : a high-temperature pathway to molecular hydrogen

    NARCIS (Netherlands)

    Boschman, L.; Cazaux, S.; Spaans, M.; Hoekstra, R.; Schlatholter, T.

    2015-01-01

    Aims. Molecular hydrogen is the most abundant molecule in the Universe. It is thought that a large portion of H-2 forms by association of hydrogen atoms to polycyclic aromatic hydrocarbons (PAHs). We model the influence of PAHs on total H-2 formation rates in photodissociation regions (PDRs) and ass

  8. Cement Formation:A Success Story in a Black Box: High Temperature Phase Formation of Portland Cement Clinker

    OpenAIRE

    2012-01-01

    Cement production has been subject to several technological changes, each of which requires detailed knowledgeabout the high multiplicity of processes, especially the high temperature process involved in the rotary kiln. This article gives an introduction to the topic of cement, including an overview of cement production, selected cement properties, and clinker phase relations. An extended summary of laboratory-scale investigations on clinkerization reactions, the most important reactions in ...

  9. The costae presenting in high-temperature-induced vestigial wings of Drosophila: implications for anterior wing margin formation

    Indian Academy of Sciences (India)

    Daxiang Yang

    2007-01-01

    It has long been noted that high temperature produces great variation in wing forms of the vestigial mutant of Drosophila. Most of the wings have defects in the wing blade and partially formed wing margin, which are the result of autonomous cell death in the presumptive wing blade or costal region of the wing disc. The vestigial gene ($vg$) and the interaction of Vg protein with other gene products are well understood. With this biochemical knowledge, reinvestigations of the high-temperature-induced vestigial wings and the elucidation of the molecular mechanism underlying the large-scale variation of the wing forms may provide insight into further understanding of development of the wing of Drosophila. As a first step of such explorations, I examined high-temperature-induced (29°C) vestigial wings. In the first part of this paper, I provide evidences to show that the proximal and distal costae in these wings exhibit regular and continuous variation, which suggests different developmental processes for the proximal and distal costal sections. Judging by the costae presenting in the anterior wing margin, I propose that the proximal and distal costal sections are independent growth units. The genes that regulate formation of the distal costal section also strongly affect proliferation of cells nearby; however, the same phenomenon has not been found in the proximal costal section. The distal costal section seems to be an extension of the radius vein. vestigial, one of the most intensely researched temperature-sensitive mutations, is a good candidate for the study of marginal vein formation. In the second part of the paper, I regroup the wing forms of these wings, chiefly by comparison of venation among these wings, and try to elucidate the variation of the wing forms according to the results of previous work and the conclusions reached in the first part of this paper, and provide clues for further researches.

  10. Enhanced High Temperature Corrosion Resistance in Advanced Fossil Energy Systems by Nano-Passive Layer Formation

    Energy Technology Data Exchange (ETDEWEB)

    Arnold R. Marder

    2007-06-14

    Due to their excellent corrosion resistance, iron aluminum alloys are currently being considered for use as weld claddings in fossil fuel fired power plants. The susceptibility to hydrogen cracking of these alloys at higher aluminum concentrations has highlighted the need for research into the effect of chromium additions on the corrosion resistance of lower aluminum alloys. In the present work, three iron aluminum alloys were exposed to simulated coal combustion environments at 500 C and 700 C for both short (100 hours) and long (5,000 hours) isothermal durations. Scanning electron microscopy was used to analyze the corrosion products. All alloys exhibited excellent corrosion resistance in the short term tests. For longer exposures, increasing the aluminum concentration was beneficial to the corrosion resistance. The addition of chromium to the binary iron aluminum alloy prevented the formation iron sulfide and resulted in lower corrosion kinetics. A classification of the corrosion products that developed on these alloys is presented. Scanning transmission electron microscopy (STEM) of the as-corroded coupons revealed that chromium was able to form chromium sulfides only on the higher aluminum alloy, thereby preventing the formation of deleterious iron sulfides. When the aluminum concentration was too low to permit selective oxidation of only aluminum (upon initial exposure to the corrosion environment), the formation of chromium oxide alongside the aluminum oxide led to depletion of chromium beneath the oxide layer. Upon penetration of sulfur through the oxide into this depletion layer, iron sulfides (rather than chromium sulfides) were found to form on the low aluminum alloy. Thus, it was found in this work that the role of chromium on alloy corrosion resistance was strongly effected by the aluminum concentration of the alloy. STEM analysis also revealed the encapsulation of external iron sulfide products with a thin layer of aluminum oxide, which may provide a

  11. Sensitivity of Fischer-Tropsch Synthesis and Water-Gas Shift Catalysts to Poisons from High-Temperature High-Pressure Entrained-Flow (EF) Oxygen-Blown Gasifier Gasification of Coal/Biomass Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Burton Davis; Gary Jacobs; Wenping Ma; Dennis Sparks; Khalid Azzam; Janet Chakkamadathil Mohandas; Wilson Shafer; Venkat Ramana Rao Pendyala

    2011-09-30

    There has been a recent shift in interest in converting not only natural gas and coal derived syngas to Fischer-Tropsch synthesis products, but also converting biomass-derived syngas, as well as syngas derived from coal and biomass mixtures. As such, conventional catalysts based on iron and cobalt may not be suitable without proper development. This is because, while ash, sulfur compounds, traces of metals, halide compounds, and nitrogen-containing chemicals will likely be lower in concentration in syngas derived from mixtures of coal and biomass (i.e., using entrained-flow oxygen-blown gasifier gasification gasification) than solely from coal, other compounds may actually be increased. Of particular concern are compounds containing alkali chemicals like the chlorides of sodium and potassium. In the first year, University of Kentucky Center for Applied Energy Research (UK-CAER) researchers completed a number of tasks aimed at evaluating the sensitivity of cobalt and iron-based Fischer-Tropsch synthesis (FT) catalysts and a commercial iron-chromia high temperature water-gas shift catalyst (WGS) to alkali halides. This included the preparation of large batches of 0.5%Pt-25%Co/Al{sub 2}O{sub 3} and 100Fe: 5.1Si: 3.0K: 2.0Cu (high alpha) catalysts that were split up among the four different entities participating in the overall project; the testing of the catalysts under clean FT and WGS conditions; the testing of the Fe-Cr WGS catalyst under conditions of co-feeding NaCl and KCl; and the construction and start-up of the continuously stirred tank reactors (CSTRs) for poisoning investigations. In the second and third years, researchers from the University of Kentucky Center for Applied Energy Research (UK-CAER) continued the project by evaluating the sensitivity of a commercial iron-chromia high temperature water-gas shift catalyst (WGS) to a number of different compounds, including KHCO{sub 3}, NaHCO{sub 3}, HCl, HBr, HF, H{sub 2}S, NH{sub 3}, and a combination of H

  12. Formation of carbon vacancy in 4H silicon carbide during high-temperature processing

    Science.gov (United States)

    Ayedh, H. M.; Bobal, V.; Nipoti, R.; Hallén, A.; Svensson, B. G.

    2014-01-01

    As-grown and pre-oxidized silicon carbide (SiC) samples of polytype 4H have been annealed at temperatures up to 1950 °C for 10 min duration using inductive heating, or at 2000 °C for 30 s using microwave heating. The samples consisted of a n-type high-purity epitaxial layer grown on 4° off-axis ⟨0001⟩ n+-substrate and the evolution of the carbon vacancy (VC) concentration in the epitaxial layer was monitored by deep level transient spectroscopy via the characteristic Z1/2 peak. Z1/2 appears at ˜0.7 eV below the conduction band edge and arises from the doubly negative charge state of VC. The concentration of VC increases strongly after treatment at temperatures ≥ 1600 °C and it reaches almost 1015 cm-3 after the inductive heating at 1950 °C. A formation enthalpy of ˜5.0 eV is deduced for VC, in close agreement with recent theoretical predictions in the literature, and the entropy factor is found to be ˜5 k (k denotes Boltzmann's constant). The latter value indicates substantial lattice relaxation around VC, consistent with VC being a negative-U system exhibiting considerable Jahn-Teller distortion. The microwave heated samples show evidence of non-equilibrium conditions due to the short duration used and display a lower content of VC than the inductively heated ones. Finally, concentration-versus-depth profiles of VC favour formation in the "bulk" of the epitaxial layer as the prevailing process and not a Schottky type process at the surface.

  13. High-pressure, high-temperature deformation of CaGeO3 (perovskite)±MgO aggregates: Elasto-ViscoPlastic Self-Consistent modeling and dynamics in the lower mantle

    Science.gov (United States)

    Hilairet, Nadège; Tomé, Carlos; Wang, Huamiao; Merkel, Sébastien; Wang, Yanbin; Gasc, Julien; Feng, Shi; Nishiyama, Norimasa

    2016-04-01

    As the largest rocky layer in the Earth, the lower mantle plays a critical role in controlling convective patterns in our planet. Current mineralogical models suggest that the lower mantle is dominated by (Mg,Fe)SiO3 perovskite (SiPv; about 70 - 90% in volume fraction) and (Mg,Fe)O ferropericlase (Fp). Knowledge of rheological properties and textures of the major constituent minerals is critical in understanding dynamic processes of the deep Earth, and relating seismic observations to mineralogy. While individual properties of these phases have been studied, fewer informations on polyphase aggregates are available. Fundamental understanding about the stress-strain interactions among the phases and their effect on the bulk rheology still remains to be properly addressed. We examine stress/strain partitioning and rheological properties of a two-phase polycrystal CaGeO3 perovskite (GePv) and MgO, deformed in the D-DIA at controlled speed ~1 - 3×10-5 s-1 at high pressures and temperatures (between 3 to 10 GPa and 300 to 1200 K), with bulk axial strains up to ~30%. We use Elasto-Visco Plastic Self-Consistent modeling (EVPSC) to reproduce lattice strains and textures measured in-situ with synchrotron X-ray diffraction. We compare the results to those on an identical deformation experiment with a single phase (GePv) polycrystal. We will discuss stress distributions between the two phases in the composite, texture developments, relationships with active slip systems, and finally the implications for rheological and seismic properties of the lower mantle.

  14. Solid inclusion complexes of vanillin with cyclodextrins: their formation, characterization, and high-temperature stability.

    Science.gov (United States)

    Kayaci, Fatma; Uyar, Tamer

    2011-11-09

    This study reports the formation of solid vanillin/cyclodextrin inclusion complexes (vanillin/CD ICs) with the aim to enhance the thermal stability and sustained release of vanillin by inclusion complexation. The solid vanillin/CD ICs with three types of CDs (α-CD, β-CD, and γ-CD) were prepared using the freeze-drying method; in addition, a coprecipitation method was also used in the case of γ-CD. The presence of vanillin in CD ICs was confirmed by FTIR and (1)H NMR studies. Moreover, (1)H NMR study elucidated that the complexation stoichiometry for both vanillin/β-CD IC and vanillin/γ-CD IC was a 1:1 molar ratio, whereas it was 0.625:1 for vanillin/α-CD IC. XRD studies have shown channel-type arrangement for CD molecules, and no diffraction peak for free vanillin was observed for vanillin/β-CD IC and vanillin/γ-CD IC, indicating that complete inclusion complexation was successfully achieved for these CD ICs. In the case of vanillin/α-CD IC, the sample was mostly amorphous and some uncomplexed vanillin was present, suggesting that α-CD was not very effective for complexation with vanillin compared to β-CD and γ-CD. Furthermore, DSC studies for vanillin/β-CD IC and vanillin/γ-CD IC have shown no melting point for vanillin, elucidating the true complex formation, whereas a melting point for vanillin was recorded for vanillin/α-CD IC, confirming the presence of some uncomplexed vanillin in this sample. TGA thermograms indicated that thermal evaporation/degradation of vanillin occurred over a much higher temperature range (150-300 °C) for vanillin/CD ICs samples when compared to pure vanillin (80-200 °C) or vanillin/CD physical mixtures, signifying that the thermal stability of vanillin was increased due to the inclusion complexation with CDs. Moreover, headspace GC-MS analyses indicated that the release of vanillin was sustained at higher temperatures in the case of vanillin/CD ICs due to the inclusion complexation when compared to vanillin

  15. Influences of carbon and silicon on blister formation in scale surface during high temperature oxidation of carbon steels

    Science.gov (United States)

    Kim, Deuk-Jung; Lee, Jae-Sang; Koo, Yang-Mo

    2017-07-01

    The in-situ blistering phenomena of the scale `surface' was investigated on three carbon steels with respect to carbon and silicon concentrations, such as 0.05 wt%C, 0.2 wt%C, and 0.2 wt%C-0.2 wt%Si. The oxidation and blistering kinetics and blister area fraction during high temperature oxidation were analyzed. The average thickness of the surface scale by oxidation during isothermal holding from 800 to 1200 °C in dry air was observed to decrease when the amount of carbon increased and/or when Si was inserted additionally. Thus, the blistering behavior depended primarily on a change in oxidation temperature ( T ox ) as well as amounts of carbon and silicon in the matrix. It is also revealed that such blister formation would be triggered by growth of internal stress and active generations of CO and/or CO2 gases at the interface between the scale and matrix since carbon would result in an increase in the blister formation by generating CO and/or CO2 gas. In addition, silicon might play an important role in preventing the blister formation at T ox below 900 °C by reducing the thickness of the surface scale whilst silicon might enhance the blister formation by means of the appreciable micro-void formation in the scale layer at T ox higher 900 °C.

  16. Sensitivity of Fischer-Tropsch Synthesis and Water-Gas Shift Catalysts to Poisons from High-Temperature High-Pressure Entrained-Flow (EF) Oxygen-Blown Gasifier Gasification of Coal/Biomass Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Burtron Davis; Gary Jacobs; Wenping Ma; Khalid Azzam; Dennis Sparks; Wilson Shafer

    2010-09-30

    The successful adaptation of conventional cobalt and iron-based Fischer-Tropsch synthesis catalysts for use in converting biomass-derived syngas hinges in part on understanding their susceptibility to byproducts produced during the biomass gasification process. With the possibility that oil production will peak in the near future, and due to concerns in maintaining energy security, the conversion of biomass-derived syngas and syngas derived from coal/biomass blends to Fischer-Tropsch synthesis products to liquid fuels may provide a sustainable path forward, especially considering if carbon sequestration can be successfully demonstrated. However, one current drawback is that it is unknown whether conventional catalysts based on iron and cobalt will be suitable without proper development because, while ash, sulfur compounds, traces of metals, halide compounds, and nitrogen-containing chemicals will likely be lower in concentration in syngas derived from mixtures of coal and biomass (i.e., using an entrained-flow oxygen-blown gasifier) than solely from coal, other byproducts may be present in higher concentrations. The current project examines the impact of a number of potential byproducts of concern from the gasification of biomass process, including compounds containing alkali chemicals like the chlorides of sodium and potassium. In the second year, researchers from the University of Kentucky Center for Applied Energy Research (UK-CAER) continued the project by evaluating the sensitivity of a commercial iron-chromia high temperature water-gas shift catalyst (WGS) to a number of different compounds, including KHCO{sub 3}, NaHCO{sub 3}, HCl, HBr, HF, H{sub 2}S, NH{sub 3}, and a combination of H{sub 2}S and NH{sub 3}. Cobalt and iron-based Fischer-Tropsch synthesis (FT) catalysts were also subjected to a number of the same compounds in order to evaluate their sensitivities.

  17. Sensitivity of Fischer-Tropsch Synthesis and Water-Gas Shift Catalystes to Poisons form High-Temperature High-Pressure Entrained-Flow (EF) Oxygen-Blown Gasifier Gasification of Coal/Biomass Mixtures

    Energy Technology Data Exchange (ETDEWEB)

    Burton Davis; Gary Jacobs; Wenping Ma; Khalid Azzam; Janet ChakkamadathilMohandas; Wilson Shafer

    2009-09-30

    There has been a recent shift in interest in converting not only natural gas and coal derived syngas to Fischer-Tropsch synthesis products, but also converting biomass-derived syngas, as well as syngas derived from coal and biomass mixtures. As such, conventional catalysts based on iron and cobalt may not be suitable without proper development. This is because, while ash, sulfur compounds, traces of metals, halide compounds, and nitrogen-containing chemicals will likely be lower in concentration in syngas derived from mixtures of coal and biomass (i.e., using entrained-flow oxygen-blown gasifier gasification gasification) than solely from coal, other compounds may actually be increased. Of particular concern are compounds containing alkali chemicals like the chlorides of sodium and potassium. In the first year, University of Kentucky Center for Applied Energy Research (UK-CAER) researchers completed a number of tasks aimed at evaluating the sensitivity of cobalt and iron-based Fischer-Tropsch synthesis (FT) catalysts and a commercial iron-chromia high temperature water-gas shift catalyst (WGS) to alkali halides. This included the preparation of large batches of 0.5%Pt-25%Co/Al{sub 2}O{sub 3} and 100Fe: 5.1Si: 3.0K: 2.0Cu (high alpha) catalysts that were split up among the four different entities participating in the overall project; the testing of the catalysts under clean FT and WGS conditions; the testing of the Fe-Cr WGS catalyst under conditions of co-feeding NaCl and KCl; and the construction and start-up of the continuously stirred tank reactors (CSTRs) for poisoning investigations.

  18. High-pressure creep tests

    Science.gov (United States)

    Bhattacharyya, S.; Lamoureux, J.; Hales, C.

    1986-01-01

    The automotive Stirling engine, presently being developed by the U.S. Department of Energy and NASA, uses high-pressure hydrogen as a working fluid; its long-term effects on the properties of alloys are relatively unknown. Hence, creep-rupture testing of wrought and cast high-temperature alloys in high-pressure hydrogen is an essential part of the research supporting the development of the Stirling cycle engine. Attention is given to the design, development, and operation of a 20 MPa hydrogen high-temperature multispecimen creep-rupture possessing high sensitivity. This pressure vessel allows for the simultaneous yet independent testing of six specimens. The results from one alloy, XF-818, are presented to illustrate how reported results are derived from the raw test data.

  19. Dimethylamine, trimethylamine, and biogenic amine formation in high-pressure processed semidried squid (Todarodes pacificius) during refrigerated storage.

    Science.gov (United States)

    Gou, Jingyu; Choi, Kun-Pyo; He, Xinlong; Ahn, Juhee

    2010-09-01

    The quality properties of semidried squid treated with high-pressure processing (HPP) were investigated during refrigerated storage. The vacuum-packed semidried squid samples were subjected to 500 MPa for 0 min (HPP-0), 5 min (HPP-5), and 10 min (HPP-10) by using a custom-made high-pressure processor and stored at a refrigerated temperature for 28 d. The populations of indigenous psychrotrophic and mesophilic bacteria were effectively reduced by approximately 1 and 2 log CFU/g at the HPP-10 treatment, respectively. Compared to the control, the bacterial counts in HPP-treated semidried squid samples were maintained at low levels throughout the storage period. The increase in the amounts of dimethylamine (DMA) and trimethylamine (TMA) was more pronounced at the unpressurized control than at the HPP treatments. The production of biogenic amines (BAs) varied with HPP treatment during refrigerated storage. Therefore, the application of HPP may provide a significant improvement in the safety and quality of semidried squid.

  20. Synthesis of sodium polyhydrides at high pressures.

    Science.gov (United States)

    Struzhkin, Viktor V; Kim, Duck Young; Stavrou, Elissaios; Muramatsu, Takaki; Mao, Ho-Kwang; Pickard, Chris J; Needs, Richard J; Prakapenka, Vitali B; Goncharov, Alexander F

    2016-01-01

    The only known compound of sodium and hydrogen is archetypal ionic NaH. Application of high pressure is known to promote states with higher atomic coordination, but extensive searches for polyhydrides with unusual stoichiometry have had only limited success in spite of several theoretical predictions. Here we report the first observation of the formation of polyhydrides of Na (NaH3 and NaH7) above 40 GPa and 2,000 K. We combine synchrotron X-ray diffraction and Raman spectroscopy in a laser-heated diamond anvil cell and theoretical random structure searching, which both agree on the stable structures and compositions. Our results support the formation of multicenter bonding in a material with unusual stoichiometry. These results are applicable to the design of new energetic solids and high-temperature superconductors based on hydrogen-rich materials.

  1. Synthesis of sodium polyhydrides at high pressures

    Science.gov (United States)

    Struzhkin, Viktor V.; Kim, Duck Young; Stavrou, Elissaios; Muramatsu, Takaki; Mao, Ho-Kwang; Pickard, Chris J.; Needs, Richard J.; Prakapenka, Vitali B.; Goncharov, Alexander F.

    2016-07-01

    The only known compound of sodium and hydrogen is archetypal ionic NaH. Application of high pressure is known to promote states with higher atomic coordination, but extensive searches for polyhydrides with unusual stoichiometry have had only limited success in spite of several theoretical predictions. Here we report the first observation of the formation of polyhydrides of Na (NaH3 and NaH7) above 40 GPa and 2,000 K. We combine synchrotron X-ray diffraction and Raman spectroscopy in a laser-heated diamond anvil cell and theoretical random structure searching, which both agree on the stable structures and compositions. Our results support the formation of multicenter bonding in a material with unusual stoichiometry. These results are applicable to the design of new energetic solids and high-temperature superconductors based on hydrogen-rich materials.

  2. High pressure technology 1994

    Energy Technology Data Exchange (ETDEWEB)

    Kapp, J.A.; Picqueuer, L.M. (eds.)

    1994-01-01

    This volume is divided into four sessions: fracture mechanics applications to high pressure vessels; high pressure code issues; high pressure design, analysis, and safety concerns; and military and other high pressure applications. Separate abstracts were prepared for eleven papers of this conference.

  3. High-Pressure Vibrational Spectroscopy.

    Science.gov (United States)

    Pogson, Mark

    1987-09-01

    Available from UMI in association with The British Library. Requires signed TDF. The study of solids at high pressure and variable temperature enables development of accurate interatomic potential functions over wide ranges of interatomic distances. A review of the main models used in the determination of these potentials is given in Chapter one. A discussion of phonon frequency as a variable physical parameter reflecting the interatomic potential is given. A high pressure Raman study of inorganic salts of the types MSCN, (M = K,Rb,Cs & NH_4^+ ) and MNO_2, (M = K,Na) has been completed. The studies have revealed two new phases in KNO_2 and one new phase in NaNO _2 at high pressure. The accurate phonon shift data have enabled the determination of the pure and biphasic stability regions of the phases of KNO _2. A discussion of the B1, B2 relationship of univalent nitrites is also given. In the series of thiocyanates studied new phases have been found in all four materials. In both the potassium and rubidium salts two new phases have been detected, and in the ceasium salt one new phase has been detected, all at high pressure, from accurate phonon shift data. These transitions are discussed in terms of second-order mechanisms with space groups suggested for all phases, based on Landau's theory of second-order phase transitions. In the ammonium salt one new phase has been detected. This new phase transition has been interpreted as a second-order transition. The series of molecular crystals CH_3 HgX, (X = Cl,Br & I) has been studied at high pressure and at variable temperature. In Chapter five, their phase behaviour at high pressure is detailed along with the pressure dependencies of their phonon frequencies. In the chloride and the bromide two new phases have been detected. In the bromide one has been detected at high temperature and one at high pressure, and latter being interpreted as the stopping of the methyl rotation. In the chloride one phase has been found at

  4. Pulse Radiolysis at High Temperatures and High Pressures

    DEFF Research Database (Denmark)

    Christensen, H.; Sehested, Knud

    1980-01-01

    A cell for pulse radiolytic measurements up to temperatures of 320°C and pressures of 14 MPa is constructed. The activation energy of the reaction OH + Cu2+ is determined to 13.3 kJ × mol−1 (3.2 kcal × mol−1). A preliminary study of the reaction e−aq + e−aq yields an activation energy of 22 kJ × ...

  5. Synthesis of large diamond crystals containing high-nitrogen concentration at high pressure and high temperature using Ni-based solvent by temperature gradient methodHuang Guo-Feng1, Jia Xiao-Peng1,2, Li Shang-Sheng2,

    Institute of Scientific and Technical Information of China (English)

    Huang Guo-Feng; Jia Xiao-Peng; Li Shang-Sheng; Zhang Ya-Fei; Li Yong; Zhao Ming; Ma Hong-An

    2010-01-01

    This paper reprots that with Ni-based catalyst/solvent and with a dopant of NaN3>, large green single crystal diamonds with perfect shape are successfully synthesized by temperature gradient method under high pressure and high temperature in a China-type cubic anvil high-pressure apparatus (SPD-6×1200), and the highest nitrogen concentration reaches approximately 1214-1257 ppm calculated by infrared absorption spectra. The synthesis conditions are about 5.5 GPa and 1240-1300℃. The growth behaviour of diamond with high-nitrogen concentration is investigated in detail. The results show that, with increasing the content of NaN3> added in synthesis system, the width of synthesis temperature region for growth high-quality diamonds becomes narrower, and the morphology of diamond crystal is changed from cube-octahedral to octahedral at same temperature and pressure, the crystal growth rate is slowed down,nevertheless, the nitrogen concentration doped in synthetic diamond increases.

  6. Formation of nanocrystalline Fe73.5Cu1Nb3Si13.5B9 alloy under high pressure

    Institute of Scientific and Technical Information of China (English)

    张湘义; 张静武; 张富祥; 于文; 贺端威; 曹立民; 赵建华; 刘日平; 许应凡; 王文魁

    1999-01-01

    The formation of nanocrystalline Fe73.5 Cu1Nb3Si13.5 B9 alloy by annealing an amorphous Fe73.5Cu1Nb3Si13.5B9 alloy at a temperature of 823 K under pressures in the range of 1—5 GPa is investigated by using X-ray diffraction, electron diffraction, and transmission electron microscopy. The high pressure experiments are carried out in belt-type pressure apparatus. Experimental results show that the initial crystalline phase in these annealed alloys is α-Fe solid solution (named α-Fe phase below), and high pressure has a great influence on the crystallization process of the α-Fe phase. The grain size of the α-Fe phase decreases with the increase of pressure (P). The volume fraction of the α-Fe phase increases with increasing the pressure as the pressure is below 2 GPa, and then decreases (P>2 GPa). The mechanism for the effects of the high pressure on the crystallization process of amorphous Fe73.5 Cu1Nb3Si13.5B9 alloy is discussed.

  7. Nanostructure formation during relatively high temperature growth of Mn-doped GaAs by molecular beam epitaxy

    Energy Technology Data Exchange (ETDEWEB)

    Del Río-De Santiago, A.; Méndez-García, V.H. [CIACyT-UASLP, Sierra Leona Av. # 550, Lomas 2a Secc, San Luis Potosí, S.L.P. 78210, México (Mexico); Martínez-Velis, I.; Casallas-Moreno, Y.L. [Physics Department, CINVESTAV-IPN, Apdo. Postal 14470 D. F. México, México (Mexico); López-Luna, E. [CIACyT-UASLP, Sierra Leona Av. # 550, Lomas 2a Secc, San Luis Potosí, S.L.P. 78210, México (Mexico); Yu Gorbatchev, A. [IICO-UASLP, Av. Karakorum 1470, Lomas 4a. Sección, San Luis Potosí, S.L.P. 78210, México (Mexico); López-López, M. [Physics Department, CINVESTAV-IPN, Apdo. Postal 14470 D. F. México, México (Mexico); Cruz-Hernández, E., E-mail: esteban.cruz@uaslp.mx [CIACyT-UASLP, Sierra Leona Av. # 550, Lomas 2a Secc, San Luis Potosí, S.L.P. 78210, México (Mexico)

    2015-04-01

    Highlights: • The formation of different kind of nanostructures in GaMnAs layers depending on Mn concentration at relative HT-MBE is reported. In this Mn% range, it is found the formation of nanogrooves, nanoleaves, and nanowires. • It is shown the progressive photoluminescence transitions from purely GaAsMn zinc blende (for Mn% = 0.01) to a mixture of zinc blende and wurtzite GaAsMn (for Mn% = 0.2). • A critical thickness for the Mn catalyst effect was determined by RHEED. - Abstract: In the present work, we report on molecular beam epitaxy growth of Mn-doped GaAs films at the relatively high temperature (HT) of 530 °C. We found that by increasing the Mn atomic percent, Mn%, from 0.01 to 0.2, the surface morphology of the samples is strongly influenced and changes from planar to corrugated for Mn% values from 0.01 to 0.05, corresponding to nanostructures on the surface with dimensions of 200–300 nm and with the shape of leave, to nanowire-like structures for Mn% values above 0.05. From reflection high-energy electron diffraction patterns, we observed the growth mode transition from two- to three-dimensional occurring at a Mn% exceeding 0.05. The optical and electrical properties were obtained from photoluminescence (PL) and Hall effect measurements, respectively. For the higher Mn concentration, besides the Mn related transitions at approximately 1.41 eV, PL spectra sharp peaks are present between 1.43 and 1.49 eV, which we related to the coexistence of zinc blende and wurtzite phases in the nanowire-like structures of this sample. At Mn% of 0.04, an increase of the carrier mobility up to a value of 1.1 × 10{sup 3} cm{sup 2}/Vs at 77 K was found, then decreases as Mn% is further increased due to the strengthening of the ionized impurity scattering.

  8. Study of electrical conductivity response upon formation of ice and gas hydrates from salt solutions by a second generation high pressure electrical conductivity probe.

    Science.gov (United States)

    Sowa, Barbara; Zhang, Xue Hua; Kozielski, Karen A; Dunstan, Dave E; Hartley, Patrick G; Maeda, Nobuo

    2014-11-01

    We recently reported the development of a high pressure electrical conductivity probe (HP-ECP) for experimental studies of formation of gas hydrates from electrolytes. The onset of the formation of methane-propane mixed gas hydrate from salt solutions was marked by a temporary upward spike in the electrical conductivity. To further understand hydrate formation a second generation of window-less HP-ECP (MkII), which has a much smaller heat capacity than the earlier version and allows access to faster cooling rates, has been constructed. Using the HP-ECP (MkII) the electrical conductivity signal responses of NaCl solutions upon the formation of ice, tetrahydrofuran hydrates, and methane-propane mixed gas hydrate has been measured. The concentration range of the NaCl solutions was from 1 mM to 3M and the driving AC frequency range was from 25 Hz to 5 kHz. This data has been used to construct an "electrical conductivity response phase diagrams" that summarize the electrical conductivity response signal upon solid formation in these systems. The general trend is that gas hydrate formation is marked by an upward spike in the conductivity at high concentrations and by a drop at low concentrations. This work shows that HP-ECP can be applied in automated measurements of hydrate formation probability distributions of optically opaque samples using the conductivity response signals as a trigger.

  9. Closed-loop steerable drilling tools for high temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Donati, F.; Oppelt, J.; Ragnitz, D. [and others

    1995-12-31

    Today drilling environment calls for drillers to be able to access deeper, high temperature and high pressure reservoirs, where high temperature is intended close to 200{degrees}C and high pressure more than 10000 psi. A new family of automatic drilling tools has been introduced which provides automatic steering within ultra deep formations under high temperature and high pressure (HTHP) conditions. Another important use of this system is foreseen in the drilling of wells with extended reach horizontal sections. The directional changes in the Closed-Loop Drilling System are automatically generated on the basis of Measurement While Drilling (MWD) measurements taken directly within the tool. Since the major application aims at the very deep hydrocarbon layers, all components are designed to operate at temperatures between 185 to 200{degrees}C. Special consideration is given to the design of downhole motor elastomer and electronic components of the MWD. In preparation for the field application of the complete fully directional tool, field tests have been performed with a Straight Hole Drilling Closed-Loop System and other essential system components. The Straight Hole Drilling Device has been designed to drill a straight vertical well. It has been successfully run on various onshore and offshore European locations; where in one case a maximum depth of over 7,200 m was attained. Additional field case histories are provided in this report on high temperature downhole motors. The complete fully directional system will be ready for field application within end of June 1995.

  10. High-temperature granulites and supercontinents

    Institute of Scientific and Technical Information of China (English)

    J.L.R. Touret; M. Santosh; J.M. Huizenga

    2016-01-01

    The formation of continents involves a combination of magmatic and metamorphic processes. These processes become indistinguishable at the crust-mantle interface, where the pressure-temperature (P-T) conditions of (ultra) high-temperature granulites and magmatic rocks are similar. Continents grow laterally, by magmatic activity above oceanic subduction zones (high-pressure metamorphic setting), and vertically by accumulation of mantle-derived magmas at the base of the crust (high-temperature metamorphic setting). Both events are separated from each other in time; the vertical accretion post-dating lateral growth by several tens of millions of years. Fluid inclusion data indicate that during the high-temperature metamorphic episode the granulite lower crust is invaded by large amounts of low H2O-activity fluids including high-density CO2 and concentrated saline solutions (brines). These fluids are expelled from the lower crust to higher crustal levels at the end of the high-grade metamorphic event. The final amalgamation of supercontinents corresponds to episodes of ultra-high temperature metamorphism involving large-scale accumulation of these low-water activity fluids in the lower crust. This accumulation causes tectonic instability, which together with the heat input from the sub-continental lithospheric mantle, leads to the disruption of supercontinents. Thus, the fragmentation of a supercontinent is already programmed at the time of its amalgamation.

  11. High-temperature granulites and supercontinents

    Directory of Open Access Journals (Sweden)

    J.L.R. Touret

    2016-01-01

    Full Text Available The formation of continents involves a combination of magmatic and metamorphic processes. These processes become indistinguishable at the crust-mantle interface, where the pressure-temperature (P-T conditions of (ultra high-temperature granulites and magmatic rocks are similar. Continents grow laterally, by magmatic activity above oceanic subduction zones (high-pressure metamorphic setting, and vertically by accumulation of mantle-derived magmas at the base of the crust (high-temperature metamorphic setting. Both events are separated from each other in time; the vertical accretion postdating lateral growth by several tens of millions of years. Fluid inclusion data indicate that during the high-temperature metamorphic episode the granulite lower crust is invaded by large amounts of low H2O-activity fluids including high-density CO2 and concentrated saline solutions (brines. These fluids are expelled from the lower crust to higher crustal levels at the end of the high-grade metamorphic event. The final amalgamation of supercontinents corresponds to episodes of ultra-high temperature metamorphism involving large-scale accumulation of these low-water activity fluids in the lower crust. This accumulation causes tectonic instability, which together with the heat input from the sub-continental lithospheric mantle, leads to the disruption of supercontinents. Thus, the fragmentation of a supercontinent is already programmed at the time of its amalgamation.

  12. Formation of the high-intensity microsecond flow of electrons in the channel of high pressure arc discharge

    CERN Document Server

    Volkolupov, Yu Ya; Kolyada, Y E; Fedun, V I; Onishchenko, I N

    2000-01-01

    The possibility of microsecond duration powerful electron flows formation in the channel of high current arc discharge at atmosphere pressure has been experimentally demonstrated. The flow of electrons is formed at applying the high voltage pulse to the plasma source after plasma ejection and the pressure decreasing. Because the acceleration by the electric field prevails over the friction force due to collisions the conditions for arising of running electrons are fulfilled.

  13. Biological CO2 conversion to acetate in subsurface coal-sand formation using a high-pressure reactor system

    Science.gov (United States)

    Ohtomo, Y.; Ijiri, A.; Ikegawa, Y.; Tsutsumi, M.; Imachi, H.; Uramoto, G.; Hoshino, T.; Morono, Y.; Tanikawa, W.; Hirose, T.; Inagaki, F.

    2013-12-01

    The geological CO2 sequestration into subsurface unmineable oil/gas fields and coal formations has been considered as one of the possible ways to reduce dispersal of anthropogenic greenhouse gasses into the atmosphere. However, feasibility of CO2 injection largely depends on a variety of geological and economical settings, and its ecological consequences have remained largely unpredictable. To address these issues, we developed a new flow-through-type CO2 injection system designated as the 'geobio-reactor system' to examine possible geophysical, geochemical and microbiological impact caused by CO2 injection under in-situ pressure (0-100 MPa) and temperature (0-70°C) conditions. In this study, we investigated Eocene bituminous coal-sandstones in the northwestern Pacific coast, Hokkaido, Japan, using the geobio-reactor system. Anaerobic artificial fluid and CO2 (flow rate: 0.002 and 0.00001 mL/min, respectively) were continuously supplemented into the coal-sand column under the pore pressure of 40 MPa (confined pressure: 41 MPa) at 40°C for 56 days. Molecular analysis of bacterial 16S rRNA genes showed that predominant bacterial components were physically dispersed from coal to sand as the intact form during experiment. Cultivation experiments from sub-sampling fluids indicated that some terrestrial microbes could preserve their survival in subsurface condition. Molecular analysis of archaeal 16S rRNA genes also showed that no methanogens were activated during experiment. We also anaerobically incubated the coal sample using conventional batch-type cultivation technique with a medium for methanogens. After one year of the batch incubation at 20°C, methane could be detected from the cultures except for the acetate-fed culture. The sequence of archaeal 16S rRNA genes via PCR amplification obtained from the H2 plus formate-fed culture was affiliated with a hydrogenotrophic methanogen within the genus Methanobacterium, whereas the methanol plus trimethylamine culture

  14. Angle-dependent hard X-ray photoemission study of Nb hydride formation in high-pressure supercritical water

    Energy Technology Data Exchange (ETDEWEB)

    Soda, Kazuo, E-mail: j45880a@cc.nagoya-u.ac.jp [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Kondo, Hiroki; Yamaguchi, Kanta; Kato, Masahiko [Department of Quantum Engineering, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Shiraki, Tatsuhito; Niwa, Ken; Kusaba, Keiji; Hasegawa, Masashi [Department of Crystalline Materials Science, Graduate School of Engineering, Nagoya University, Furo-cho, Chikusa-ku, Nagoya 464-8603 (Japan); Xeniya, Kozina; Ikenaga, Eiji [Japan Synchrotron Radiation Research Institute, 1-1-1, Kouto, Sayo-cho, Sayo-gun, Hyogo 679-5198 (Japan)

    2015-09-15

    Highlights: • Nb hydrides in 10-GPa supercritical water are studied by photoelectron spectroscopy. • The hydride components of the Nb 3d core-level spectra are increased with the depth. • The bulk valence-band spectrum shows a split band due to the Nb–H bond formation. • The hydrides are formed in the bulk and their surfaces are covered with Nb oxides. - Abstract: Nb hydrides formation in 10-GPa supercritical water has been investigated by angle-dependent micro-beam hard X-ray photoemission spectroscopy. In the Nb 3d core-level spectra, Nb hydride components are found in the slightly high binding energy side of the metallic components, and the oxide ones are observed even though little oxides are recognized in X-ray diffraction patterns. Obtained emission-angle dependence of the Nb 3d core-level spectra of Nb hydride specimens shows that the Nb hydride components increase with the emission angle decreased i.e. the sampling depth increased, while the oxide ones decrease. The bulk valence-band spectrum is obtained by decomposing the measured valence-band spectra into a bulk and surface components with use of the emission-angle dependence of the core-level and valence-band spectra; it consists of two bands. This implies the Nb–H chemical bond formation and Nb in an oxidation state, consistent with reported band structure calculations and the observed core-level chemical shifts. Thus it is confirmed by valence-band and core-level photoelectron spectroscopy that the Nb hydrides are formed inside the specimen, irrespective to the well-known high oxidation ability of supercritical water.

  15. Biological CO2 conversion to acetate in subsurface coal-sand formation using a high-pressure reactor system

    Directory of Open Access Journals (Sweden)

    Yoko eOhtomo

    2013-12-01

    Full Text Available Geological CO2 sequestration in unmineable subsurface oil/gas fields and coal formations has been proposed as a means of reducing anthropogenic greenhouse gasses in the atmosphere. However, the feasibility of injecting CO2 into subsurface depends upon a variety of geological and economic conditions, and the ecological consequences are largely unpredictable. In this study, we developed a new flow-through-type reactor system to examine potential geophysical, geochemical and microbiological impacts associated with CO2 injection by simulating in situ pressure (0–100 MPa and temperature (0–70°C conditions. Using the reactor system, anaerobic artificial fluid and CO2 (flow rate: 0.002 and 0.00001 mL/min, respectively were continuously supplemented into a column comprised of bituminous coal and sand under a pore pressure of 40 MPa (confined pressure: 41 MPa at 40°C for 56 days. 16S rRNA gene analysis of the bacterial components showed distinct spatial separation of the predominant taxa in the coal and sand over the course of the experiment. Cultivation experiments using sub-sampled fluids revealed that some microbes survived, or were metabolically active, under CO2-rich conditions. However, no methanogens were activated during the experiment, even though hydrogenotrophic and methylotrophic methanogens were obtained from conventional batch-type cultivation at 20°C. During the reactor experiment, the acetate and methanol concentration in the fluids increased while the δ13Cacetate, H2 and CO2 concentrations decreased, indicating the occurrence of homo-acetogenesis. 16S rRNA genes of homo-acetogenic spore-forming bacteria related to the genus Sporomusa were consistently detected from the sandstone after the reactor experiment. Our results suggest that the injection of CO2 into a natural coal-sand formation preferentially stimulates homo-acetogenesis rather than methanogenesis, and that this process is accompanied by biogenic CO2 conversion to

  16. 高温高压用耐热钢弹性蠕变损伤本构模型研究%Research on Constitutive Model of Elastic Creep Damage of Heat Resistant Steel under the condition of High temperature and High Pressure

    Institute of Scientific and Technical Information of China (English)

    马兆纬

    2001-01-01

    In the light of the fact that elastic creep damage happens to heat resistant steel used as pressure elements like steam pipeline and steam pockets in heat-engine plants at high temperature and under high pressure,this article gives a complete constitutive description of the damage,building up the theory of phenomenology about creep damage.It dwells here upon the constitutive model of tlastic creep damage of heat resistant steel,establishing a corresponding variation principle and finite element discretization form,thus introducing complete numerical variational methods.%针对火电厂中蒸汽管道与汽包类承压部件用的耐热钢,在承受高温高压时发生弹性蠕变损伤问题,给出完整的损伤本构描述,建立起唯象学蠕变损伤理论。主要提出耐热钢的弹性蠕变损伤本构模型,建立起相应的数值变分原理以及有限元离散化形式,从而形成完整的数值变分方法。

  17. A Study of Strain States of Gallium Nitride Prepared Through Solid-State Metathesis Reaction Under High Pressure and High Temperature.%高温高压固态复分解反应法生长氮化镓的应变性质研究

    Institute of Scientific and Technical Information of China (English)

    马瑶; 龚敏; 马欢; 贺端威

    2011-01-01

    本文采用高温高压下固态复分解反应法生长氮化镓.用X射线衍射仪、扫描电子显微镜、激光拉曼光谱仪对其进行分析,结果表明生成了六角纤锌矿结构的氮化镓晶体.该样品在宏观上受到了张应力的作用,退火后,宏观的应变状态由张应变向压应变转变;晶体微观应力减小,晶粒尺寸变大,晶体质量变好.%Gallium nitride(GaN) crystals have been prepared through solid-state metathesis reaction under high pressure and high temperature. X-ray diffraction(XRD) ..Scanning e-lectron microscopy(SEM)and Raman spectra (Raman) were used to analyse the crystals. The results indicated that the crystals were hexagonal Gallium nitride and its macrostress was tensile. After anneal, the strain states of the crystals changed from tensile to com-pressive. And the microstress reduced? The size increased and the quality became better.

  18. High Temperature Piezoelectric Drill

    Science.gov (United States)

    Bao, Xiaoqi; Scott, James; Boudreau, Kate; Bar-Cohen, Yoseph; Sherrit, Stewart; Badescu, Mircea; Shrout, Tom; Zhang, Shujun

    2009-01-01

    The current NASA Decadal mission planning effort has identified Venus as a significant scientific target for a surface in-situ sampling/analyzing mission. The Venus environment represents several extremes including high temperature (460 deg C), high pressure (9 MPa), and potentially corrosive (condensed sulfuric acid droplets that adhere to surfaces during entry) environments. This technology challenge requires new rock sampling tools for these extreme conditions. Piezoelectric materials can potentially operate over a wide temperature range. Single crystals, like LiNbO3, have a Curie temperature that is higher than 1000 deg C and the piezoelectric ceramics Bismuth Titanate higher than 600 deg C. A study of the feasibility of producing piezoelectric drills that can operate in the temperature range up to 500 deg C was conducted. The study includes the high temperature properties investigations of engineering materials and piezoelectric ceramics with different formulas and doping. The drilling performances of a prototype Ultrasonic/Sonic Drill/Corer (USDC) using high temperate piezoelectric ceramics and single crystal were tested at temperature up to 500 deg C. The detailed results of our study and a discussion of the future work on performance improvements are presented in this paper.

  19. High Temperature Capacitor Development

    Energy Technology Data Exchange (ETDEWEB)

    John Kosek

    2009-06-30

    The absence of high-temperature electronics is an obstacle to the development of untapped energy resources (deep oil, gas and geothermal). US natural gas consumption is projected to grow from 22 trillion cubic feet per year (tcf) in 1999 to 34 tcf in 2020. Cumulatively this is 607 tcf of consumption by 2020, while recoverable reserves using current technology are 177 tcf. A significant portion of this shortfall may be met by tapping deep gas reservoirs. Tapping these reservoirs represents a significant technical challenge. At these depths, temperatures and pressures are very high and may require penetrating very hard rock. Logistics of supporting 6.1 km (20,000 ft) drill strings and the drilling processes are complex and expensive. At these depths up to 50% of the total drilling cost may be in the last 10% of the well depth. Thus, as wells go deeper it is increasingly important that drillers are able to monitor conditions down-hole such as temperature, pressure, heading, etc. Commercial off-the-shelf electronics are not specified to meet these operating conditions. This is due to problems associated with all aspects of the electronics including the resistors and capacitors. With respect to capacitors, increasing temperature often significantly changes capacitance because of the strong temperature dependence of the dielectric constant. Higher temperatures also affect the equivalent series resistance (ESR). High-temperature capacitors usually have low capacitance values because of these dielectric effects and because packages are kept small to prevent mechanical breakage caused by thermal stresses. Electrolytic capacitors do not operate at temperatures above 150oC due to dielectric breakdown. The development of high-temperature capacitors to be used in a high-pressure high-temperature (HPHT) drilling environment was investigated. These capacitors were based on a previously developed high-voltage hybridized capacitor developed at Giner, Inc. in conjunction with a

  20. Phase formation in the (1-y)BiFeO3-yBiScO3 system under ambient and high pressure

    Science.gov (United States)

    Salak, A. N.; Khalyavin, D. D.; Pushkarev, A. V.; Radyush, Yu. V.; Olekhnovich, N. M.; Shilin, A. D.; Rubanik, V. V.

    2017-03-01

    Formation and thermal stability of perovskite phases in the BiFe1-yScyO3 system (0≤y≤0.70) were studied. When the iron-to-scandium substitution rate does not exceed about 15 at%, the single-phase perovskite ceramics with the rhombohedral R3c symmetry (as that of the parent compound, BiFeO3) can be prepared from the stoichiometric mixture of the respective oxides at ambient pressure. Thermal treatment of the oxide mixtures with a higher content of scandium results in formation of two main phases, namely a BiFeO3-like R3c phase and a cubic (I23) sillenite-type phase based on γ-Bi2O3. Single-phase perovskite ceramics of the BiFe1-yScyO3 composition were synthesized under high pressure from the thermally treated oxide mixtures. When y is between 0 and 0.25 the high-pressure prepared phase is the rhombohedral R3c with the √2ap×√2ap×2√3ap superstructure (ap 4 Å is the pseudocubic perovskite unit-cell parameter). The orthorhombic Pnma phase (√2ap×4ap×2√2ap) was obtained in the range of 0.30≤y≤0.60, while the monoclinic C2/c phase (√6ap×√2ap×√6ap) is formed when y=0.70. The normalized unit-cell volume drops at the crossover from the rhombohedral to the orthorhombic composition range. The perovskite BiFe1-yScyO3 phases prepared under high pressure are metastable regardless of their symmetry. At ambient pressure, the phases with the compositions in the ranges of 0.20≤y≤0.25, 0.30≤y<0.50 and 0.50≤y≤0.70 start to decompose above 970, 920 and 870 K, respectively.

  1. Modeling of metallic aerosol formation in a multicomponent system at high temperatures using a discrete-sectional model. Appendix 7

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-02-01

    A multicomponent discrete-sectional model was used to simulate the fate of lead in a high temperature system. The results show the ability of the developed model to simulate metallic aerosol systems at high temperatures. The PbO reaction and nucleation rate can be determined by comparing the simulations and the experimental data. Condensation on SiO{sub 2} particle surfaces is found important for removing the PbO vapor. The value of the accommodation factor that is applied to account for nonidealities in the condensation process are determined. The differences between the nanosized particles and the bulk particles are elucidated. The use of such a model helped to understand the effects of various mechanisms in determining the metal oxide vapor concentration profile and in establishing the ultimate particle size distribution.

  2. High-pressure apparatus

    NARCIS (Netherlands)

    Schepdael, van L.J.M.; Bartels, P.V.; Berg, van den R.W.

    1999-01-01

    The invention relates to a high-pressure device (1) having a cylindrical high-pressure vessel (3) and prestressing means in order to exert an axial pressure on the vessel. The vessel (3) can have been formed from a number of layers of composite material, such as glass, carbon or aramide fibers which

  3. High Temperature ESP Monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Jack Booker; Brindesh Dhruva

    2011-06-20

    The objective of the High Temperature ESP Monitoring project was to develop a downhole monitoring system to be used in wells with bottom hole well temperatures up to 300°C for measuring motor temperature, formation pressure, and formation temperature. These measurements are used to monitor the health of the ESP motor, to track the downhole operating conditions, and to optimize the pump operation. A 220 ºC based High Temperature ESP Monitoring system was commercially released for sale with Schlumberger ESP motors April of 2011 and a 250 ºC system with will be commercially released at the end of Q2 2011. The measurement system is now fully qualified, except for the sensor, at 300 °C.

  4. Formation of Glycidyl Fatty Acid Esters Both in Real Edible Oils during Laboratory-Scale Refining and in Chemical Model during High Temperature Exposure.

    Science.gov (United States)

    Cheng, Weiwei; Liu, Guoqin; Liu, Xinqi

    2016-07-27

    In the present study, the formation mechanisms of glycidyl fatty acid esters (GEs) were investigated both in real edible oils (soybean oil, camellia oil, and palm oil) during laboratory-scale preparation and refining and in chemical model (1,2-dipalmitin (DPG) and 1-monopalmitin (MPG)) during high temperature exposure (160-260 °C under nitrogen). The formation process of GEs in the chemical model was monitored using attenuated total reflection-Fourier transform infrared (ATR-FTIR) spectroscopy. The results showed that the roasting and pressing process could produce certain amounts of GEs that were much lower than that produced in the deodorization process. GE contents in edible oils increased continuously and significantly with increasing deodorization time below 200 °C. However, when the temperature exceeded 200 °C, GE contents sharply increased in 1-2 h followed by a gradual decrease, which could verify a simultaneous formation and degradation of GEs at high temperature. In addition, it was also found that the presence of acylglycerol (DAGs and MAGs) could significantly increase the formation yield of GEs both in real edible oils and in chemical model. Compared with DAGs, moreover, MAGs displayed a higher formation capacity but substantially lower contribution to GE formation due to their low contents in edible oils. In situ ATR-FTIR spectroscopic evidence showed that cyclic acyloxonium ion intermediate was formed during GE formation derived from DPG and MPG in chemical model heated at 200 °C.

  5. A mathematical model of the formation of fermentable sugars from starch hydrolysis during high-temperature mashing.

    Science.gov (United States)

    Muller

    2000-08-01

    During the mashing process of brewing, activity of the amylolytic enzymes decays due to the high temperatures used to gelatinise the starch. Because the different enzymes produce different sugars, high temperatures can be exploited to modify the fermentability of resulting worts. This is especially useful when producing low alcohol beers. The expression a.exp(b.t)-c.exp(d.t) (where t is the temperature of the mash in degrees C) provides a simple but useful description of the activity of the amylases. Combining the activities of alpha- and beta-amylases results in a prediction of the resulting fermentability. A simple modification to the expression accommodates changes in mash thickness. The error of prediction is approximately 3 degrees of fermentability. The model is not appropriate for predicting the fermentability of worts produced at the lower standard mashing temperatures. It can be used without the necessity of analytical parameters so analyses that the brewer would not normally perform are not required. If increased accuracy is needed, the results of two previous mashes can be used to modify the parameters used.

  6. 油管钢在高温高压H2S/CO2环境中的二次腐蚀行为研究%Research on Second Corrosion Behavior of Oil Tube Steel in High Temperature and High Pressure Environments Containing H2S/CO2

    Institute of Scientific and Technical Information of China (English)

    燕铸; 钱进森; 李振东; 刘建彬; 李小波

    2014-01-01

    利用美国CORTEST公司高温高压反应釜模拟高含S油气田H2S/CO2腐蚀环境,在流动高矿化度饱和H2S/CO2介质中进行试验,辅以SEM、 XRD、动电位扫描及交流阻抗等表面分析和电化学技术,探讨了油管钢在高温高压H2S/CO2环境中的二次腐蚀行为。结果表明,普通N80油管钢单一CO2腐蚀速率较高,为1.89 mm/a;先CO2腐蚀后H2S腐蚀,腐蚀速率减小为1.38 mm/a,材料的腐蚀类型表现出严重的局部腐蚀,先生成的FeCO3膜转变为FeS膜,转变过程中腐蚀产物膜的晶格发生畸变,导致腐蚀产物膜分层、疏松且容易脱落;先H2S腐蚀后再CO2腐蚀,腐蚀速率明显减小至0.27 mm/a,腐蚀产物膜未发生转变,通过腐蚀产物膜电化学测试分析, FeCO3膜对基体的保护性差,而FeS膜对基体的保护性相对较好。%H2S/CO2 corrosion environments in oil and gas field containing rich S were simulated in a high temperature and high pressure autoclave manufactured by USA Cortest Company,and tests were conducted in flowing medium with high salinity. Second corrosion behavior of oil tube steel in high temperature and high pressure H2S/CO2 corrosion environments was analyzed and discussed by the following technologies,such as SEM,XRD,dynamic potential scanning,AC impedance and electrochemical techniques. The results showed that corrosion rate of N80 oil tube steel was very high,up to 1.89 mm/a. when solution immersion environment contain only CO2. If H2S corrosion was conducted after CO2 corrosion, the corrosion rate reduced to 1.38 mm/a. The corrosion type showed distinct characteristic of local corrosion. FeCO3 corrosion film formed firstly would be transformed to FeS film,in this process,aberration of crystal lattice happened,which would result in delamination and loosen of film. If CO2 corrosion was conducted after H2S corrosion, the corrosion rate decreased a lot,up to 0.27 mm/a, FeS film formed firstly would not

  7. Formation of abnormal high pressure and its application in the study of oil-bearing property of lithologic hydrocarbon reservoirs in the Dongying Sag

    Institute of Scientific and Technical Information of China (English)

    ZHANG ShanWen; ZHANG LinYe; ZHANG ShouChun; LIU Qing; ZHU RiFang; BAO YouShu

    2009-01-01

    The mechanisms of abnormal high pressures are studied in this paper, and it is concluded that the undercompaction, hydrocarbon generation and stratum denudation are obviously effective to fluid pressure buildup. Because of the episodic difference, the hydrocarbon generation and stratum denu-dation are the main factors influencing oil-gas migration. On the basis of basin evolutionary analysis in the Dongying Sag, it is considered that the undercompaction mainly caused the abnormal pressure before the first denudation by the uplift in Late Paleogene, while hydrocarbon generation was the main factor of abnormal pressure after the denudation. The second denudation occurred in Late Neogene, which changed the pressure field and induced the fluid migration. The development of overpressures is the necessary condition to the formation of lithologic hydrocarbon reservoirs, which have positive correlations to overpressures. According to the fullness of the present reservoirs, the quantitative re-lations between oil-bearing property and driving forces of reservoir formation were determined, the latter were decided by dynamic source, reservoir capillary pressure, fluid pressure of surrounding rocks and the dynamic attenuation in different conducting systems.

  8. Pitting Behavior of HP2-13Cr in Simulated High Pressure and High Temperature Gas Well Environment%模拟高温高压气井环境中HP2-13Cr的点蚀行为研究

    Institute of Scientific and Technical Information of China (English)

    雷冰; 马元泰; 李瑛; 王福会; 常泽亮; 谢俊峰; 宋文文; 周理志

    2013-01-01

    The pitting behavior of HP2-13Cr in a simulated high pressure and high temperature gas well environment (including three periods: acidizing?returned residual acid? produced water) was investigated by OM/SEM observation. The results showed that the pitting was mainly occurred in the returned residual acid; the statistical analysis of the depth distribution of pits showed that the pitting rate in the period of returned residual acid was 7.56 mm/a, while 0.47 mm/a in the produced water. The depth distribution of pits followed Gumbel model and the shape of pits was shallow.%采用光学显微镜、扫描电子显微镜研究了HP2-13Cr油管钢在模拟高温高压气井环境中(酸化→返排残酸→采出水)点蚀行为的发展变化.结果表明:HP2-13Cr在服役过程中的点蚀主要在返排残酸阶段产生,残酸是引起HP2-13Cr点蚀的主要原因;统计了不同阶段点蚀坑深度的发展,得到返排残酸期间点蚀速率为7.56 mm/a,采出水期间点蚀发展速率为0.47 mm/a.点蚀坑深度的统计规律符合Gumbel分布,点蚀坑呈浅碟型.

  9. High-pressure high-temperature decomposition of CeCoGa to the Laves phases CeCo{sub 0.58}Ga{sub 1.42}, CeCo{sub 0.72}Ga{sub 1.28}, and CeCo{sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Niehaus, Oliver; Rodewald, Ute C.; Heying, Birgit; Poettgen, Rainer [Muenster Univ. (Germany). Inst. fuer Anorganische und Analytische Chemie; Heymann, Gunter; Huppertz, Hubert [Innsbruck Univ. (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie

    2016-07-01

    The monoclinic intermediate-valent gallide CeCoGa decomposes under high-pressure (HP) (9.5 GPa) high-temperature (HT) (1470 K) conditions into the Laves phases CeCo{sub 0.58}Ga{sub 1.42} (MgCu{sub 2} type), CeCo{sub 0.72}Ga{sub 1.28} (MgZn{sub 2} type; major product phase), and CeCo{sub 2} (MgCu{sub 2} type). The structures of the ternary Laves phases were refined from single crystal X-ray diffractometer data: Fd anti 3m, a=778.3(1) pm, wR2=0.0310, 63 F{sup 2} values, five variables for CeCo{sub 0.58(3)}Ga{sub 1.42(3)} and P6{sub 3}/mmc, a=547.24(5), c=858.76(7) pm, wR2=0.1009, 195 F{sup 2} values, 13 variables for CeCo{sub 0.72(1)}Ga{sub 1.28(1)}. Partial substitution of cobalt by gallium leads to a significant increase of the distances within the tetrahedral network: 253 pm Co-Co in CeCo{sub 2} as compared to 275 pm in CeCo{sub 0.58(3)}Ga{sub 1.42(3)} and 265-277 pm in CeCo{sub 0.72(1)}Ga{sub 1.28(1)}. The crystal chemical consequences are briefly discussed.

  10. Deformation microstructures and mechanisms in the high-pressure granulites of the Bacariza Formation (Cabo Ortegal, NW Spain): going up to the surface

    Science.gov (United States)

    Puelles, P.; Abalos, B.

    2009-04-01

    The Cabo Ortegal complex is a nappe stack formed by fragments of subducted continental and oceanic lithosphere emplaced onto the Gondwana edge during the Variscan orogeny. The nappe units of Cabo Ortegal were metamorphosed under different high-pressure (HP) conditions and currently are separated by ductile tectonic contacts. They include mappable ultramafic massifs, N-MORB eclogites, metagabbros, metaserpentinites, metaperidotites, ortho- and paragneisses, and the Bacariza Formation granulites. The primary structure consists of the ultramafic massifs tectonically resting on top of the granulites of the Bacariza Formation, which overlie eclogites and HP gneisses with eclogite boudins. Granulites of the Bacariza Formation are mainly basic to intermediate in composition, although granulitic, carbonate-rich or mineralogically more exotic varieties also exist. On the basis of modal variations in the abundance of mafic and felsic mineral several lithotypes have been differentiated in order of decreasing outcrop area: (G1) plagio-pyrigarnites or common mafic granulites, (G2) intermediate to felsic, plagioclase-rich granulites, (G3) Mg-rich mafic granulites, (G4) pyrigarnite, or plagioclase-poor ultramafic granulites, and (G5) granulitic orthogneisses. The Bacariza Formation recorded a high-pressure metamorphic event. This event was polyphasic and two deformational phases are differentiated, D1 and D2, namely. D2 is associated to amalgamation of eclogite, high-pressure granulitic rocks and ultramafic sheets in deep portions of a subduction channel during the initial exhumation of the complex. As a result, transposition of the previous D1 fabrics took place due to the development of spectacular shear zones at the contacts with the bounding units. Pressure and temperature conditions estimated from the D2 mineral assemblage in equilibrium yield values of ca. 1.4 GPa and 740 °C, respectively. In this work we present a detailed study of a D2 shear zone located at the contact

  11. Synthesis and high-pressure electrical resistivity studies of Ti{sub 3}Al

    Energy Technology Data Exchange (ETDEWEB)

    Vennila, R. Selva [Department of Physics, Anna University, Chennai 600025 (India)]. E-mail: rsvennila@yahoo.co.in; Porchelvi, E. Elamurugu [Department of Physics, Anna University, Chennai 600025 (India); Joy, K.M. Freny [Department of Physics, Anna University, Chennai 600025 (India); Arun, T.K. Jaya [Department of Physics, Anna University, Chennai 600025 (India); Jaya, N. Victor [Department of Physics, Anna University, Chennai 600025 (India)

    2005-04-19

    Titanium aluminide (Ti{sub 3}Al) has been synthesized by a powder metallurgical method. X-ray diffraction studies show the formation of a single phase with hexagonal structure. Electrical resistivity studies were carried out by a four-probe technique both at high pressure and high temperature using a Bridgman Opposed Anvil High Pressure Device (OAHPD). The sample was studied up to a pressure and temperature of 10 GPa and 250 deg. C, respectively. The electrical resistivity is found to decrease with increasing pressure. The temperature effect causes an upward shift in the electrical resistivity in the range of pressure considered.

  12. Diamond formation in the deep lower mantle: a high-pressure reaction of MgCO3 and SiO2

    Science.gov (United States)

    Maeda, Fumiya; Ohtani, Eiji; Kamada, Seiji; Sakamaki, Tatsuya; Hirao, Naohisa; Ohishi, Yasuo

    2017-01-01

    Diamond is an evidence for carbon existing in the deep Earth. Some diamonds are considered to have originated at various depth ranges from the mantle transition zone to the lower mantle. These diamonds are expected to carry significant information about the deep Earth. Here, we determined the phase relations in the MgCO3-SiO2 system up to 152 GPa and 3,100 K using a double sided laser-heated diamond anvil cell combined with in situ synchrotron X-ray diffraction. MgCO3 transforms from magnesite to the high-pressure polymorph of MgCO3, phase II, above 80 GPa. A reaction between MgCO3 phase II and SiO2 (CaCl2-type SiO2 or seifertite) to form diamond and MgSiO3 (bridgmanite or post-perovsktite) was identified in the deep lower mantle conditions. These observations suggested that the reaction of the MgCO3 phase II with SiO2 causes formation of super-deep diamond in cold slabs descending into the deep lower mantle. PMID:28084421

  13. High Temperature Materials Laboratory

    Data.gov (United States)

    Federal Laboratory Consortium — The High Temperature Materials Lab provides the Navy and industry with affordable high temperature materials for advanced propulsion systems. Asset List: Arc Melter...

  14. High temperature corrosion studies. A. Iron: based superalloy in SO/sub 2//O/sub 2/ atmospheres. B. Gas: solid reaction with formation of volatile species

    Energy Technology Data Exchange (ETDEWEB)

    Liu, T.K.

    1980-03-01

    The thermogravimetric method was used to study high temperature corrosion under SO/sub 2//O/sub 2/ atmosphere applied to Armco 18SR alloys with different heat treatment histories, Armco T310 and pure chromium between 750 and 1100/sup 0/C. The weight gain follows the parabolic rate law. The volatilization of the protective Cr/sub 2/O/sub 3/ layer via formation of CrO/sub 3/ was taken into account above 900/sup 0/C for long time runs. The parabolic rate and the volatilization rate, derived from fitting the experimental data to the modified Tedmon's non-linear model, were correlated using the Arrhenius equation. Armco 18SR-C has the best corrosion resistance of the Armco 18SR alloys. Armco T310 is not protective at high temperatures. The available rate data on the oxidation of chromium oxide, chlorination of chromium, oxidation-chlorination of chromium oxide, chlorination of nickel and chlorination of iron were found to be predictable. The calculation of high temperature volatilization rate was performed using the available fluid correlation equations and the Lennard-Jones parameters derived from the molecule with similar structure and from the low temperature viscosity measurement. The lower predicted volatilization rate is due to the use of the Chapman-Enskog equation with the Lennard-Jones parameters mostly derived from the low temperature viscosity measurement. This was substantiated by comparing the reliable high temperature diffusion rate in the literature with the above mentioned calculational method. The experimental volatilization rates of this study are compared with the other related studies and the mass transfer predictions.

  15. Formation and preservation of biotite-rich microdomains in high-temperature rocks from the Antananarivo Block, Madagascar

    Science.gov (United States)

    Cenki-Tok, Bénédicte; Berger, Alfons; Gueydan, Frédéric

    2016-07-01

    Highly restitic rocks from the Antananarivo Block in northern Madagascar are investigated in this study in order to unravel processes of H2O-rich biotite formation in HT rocks. Polyphase metamorphism and melt migration occurred at 0.6 GPa and 850 °C. Biotite remains stable together with orthopyroxene and makes up to 45 vol% of the rock. In addition, three well-characterised and delimited microdomains having different textural, chemical and petrological characteristics are preserved. Thermodynamic models using the specific bulk compositions of the domains are in agreement with petrological observations. These rocks provide evidence that the lower crust may be strongly heterogeneous, locally associated to the formation of hydrous restites controlled by episodes of melt production and melt escape. This has significant consequences for understanding of the lower crust.

  16. High Temperature Strengthening in 12Cr-W-Mo Steels by Controlling the Formation of Delta Ferrite

    Science.gov (United States)

    Wang, Shushen; Chang, Li; Lin, Deye; Chen, Xiaohua; Hui, Xidong

    2014-09-01

    Novel 12Cr-W-Mo-Co heat resistance steels (HRSs) with excellent mechanical properties have been developed for ultra-supercritical (USC) applications above 923 K (650 °C). The thermal analysis of the present steels indicates that the remelting temperature of secondary phases is increased by Co alloying, resulting in the improvement of microstructural stability. Delta ferrite in these HRSs is completely suppressed as the content of Co is increased up to 5 pct. The room temperature tensile strength (TS), yield strength (YS), and the elongation (EL) of the HRS with 5 pct Co reach 887.9, 652.6 MPa, and 21.07 pct, respectively. At 948 K (675 °C), the TS and YS of the HRS with 5 pct Co attain 360 and 290 MPa, respectively, which are higher than those of T/P122 steel by 27.4 and 22.1 pct, respectively. TEM study of the microstructure confirmed that the strengthening effects for these 12Cr-W-Mo-Co HRSs are attributed to the suppression of delta ferrite, the formation of fine martensitic laths with substructure, dislocation networks and walls, and the precipitation of second nanoscale phases.

  17. Formate-Dependent Microbial Conversion of CO2 and the Dominant Pathways of methanogenesis in production water of high-temperature oil reservoirs amended with bicarbonate

    Directory of Open Access Journals (Sweden)

    Guang-Chao eYang

    2016-03-01

    Full Text Available CO2 sequestration in deep-subsurface formations including oil reservoirs is a potential measure to reduce the CO2 concentration in the atmosphere. However, the fate of the CO2 and the ecological influences in Carbon Dioxide Capture and Storage (CDCS facilities is not understood clearly. In the current study, the fate of CO2 (in bicarbonate form (0~90 mM with 10 mM of formate as electron donor and carbon source was investigated with high-temperature production water from oilfield in China. The isotope data showed that bicarbonate could be reduced to methane by methanogens and major pathway of methanogenesis could be syntrophic formate oxidation coupled with CO2 reduction and formate methanogenesis under the anaerobic conditions. The bicarbonate addition induced the shift of microbial community. Addition of bicarbonate and formate was associated with a decrease of Methanosarcinales, but promotion of Methanobacteriales in all treatments. Thermodesulfovibrio was the major group in all the samples and Thermacetogenium dominated in the high bicarbonate treatments. The results indicated that CO2 from CDCS could be transformed to methane and the possibility of microbial CO2 conversion for enhanced microbial energy recovery in oil reservoirs.

  18. 超级13Cr不锈钢在超深超高压高温油气井中的腐蚀行为研究%Corrosion Behavior of Super 13%Cr Martensitic Stainless Steel Under Ultra-deep, Ultra-high Pressure and High Temperature Oil and Gas Well Environment

    Institute of Scientific and Technical Information of China (English)

    刘艳朝; 常泽亮; 赵国仙; 薛艳; 牛坤

    2012-01-01

    通过模拟油田超深超高压高温油气井腐蚀环境,研究超级13Cr马氏体不锈钢管材抗均匀腐蚀、点蚀及电偶腐蚀性能.结果表明:随着Cl-浓度的增加,超级13Cr马氏体不锈钢的均匀腐蚀速率在气相腐蚀环境中逐渐增大,在液相中变化不大,且气相的均匀腐蚀速率要大于液相的腐蚀速率.但不论在液相还是在气相腐蚀条件下,均匀腐蚀速率均远小于0.1 mm/a,局部腐蚀严重.在温度为150℃的气相环境中,超级13Cr钢的最大局部腐蚀速率可达2.1379 mm/a:其7天实验的最大局部腐蚀坑深度可达41μm.存电偶腐蚀试验中,不论是小试样模拟试验还是实物试验,P110作为阳极,腐蚀加剧,腐蚀速率增大,在电偶处发生明显局部腐蚀.超级13Cr马氏体不锈钢作为阴极被保护,腐蚀减缓,腐蚀速率减小.%By simulating ultra-deep, ultra-high pressure and high temperature oil and gas corrosion environment, the performance of super 13%Cr martensite stainless tubular goods against uniform corrosion, pitting and galvanic corrosion was studied. The results indicate that the uniform corrosion rate of super 13%Cr martensite stainless steel increases as the C1-concentration increasing in gas phase, and changes little in the liquid phase. The uniform corrosion rate of gas phase is higher than one of the liquid phase. However, the uniform corrosion rate is far less than 0.1 mm/a, regardless of corrosion conditions of liquid phase and gas phase, and the localized corrosion is very severe. At 150 ℃ gas environment, the maximum local corrosion rate is up to 2.1379mm/a, the maximum local corrosion pit depth is up to 41 μm in the experiment of seven days. In the galvanic corrosion test, whether they are small sample simulation test or physical test, the corrosion rate of P110 increases, which is used as an anode, it has local corrosion dramatically in the contact point. The super 13%Cr martensite stainless steel used as the cathode is

  19. 高温高压下MgSiO3熔体结构的第一性原理分子动力学研究%First-Principles Molecular Dynamics Study of the Structure of MgSiO3 Melt at High Temperatures and High Pressures

    Institute of Scientific and Technical Information of China (English)

    邓莉; 刘红; 田华; 杜建国; 刘雷

    2014-01-01

    基于第一性原理分子动力学方法,计算了MgSiO3熔体在0~144 GPa、2000~6000 K的微观结构及其随压力、温度的变化特征。计算的近零压2000 K下 O-Si、O-Mg和 O-O对分布函数的第一峰值位置分别为0.1635、0.1970和0.2695 nm,与实验结果吻合很好。随着压力和温度的变化,MgSiO3熔体结构发生了显著变化,尤其是随着压力增加,结构变得更致密;当密度为4.59 g/cm3时,原子间的平均键长随温度(小于5000 K)增加而减小,在常压和更高的压力下,原子间的平均键长随温度变化不明显。在133 GPa、4000 K 条件下, MgSiO3熔体的 O-Si、O-Mg和 O-O平均键长分别为0.1610、0.1835和0.2300 nm;从地表常压到核幔边界压力,平均 Si-O 配位数从4变到6,桥氧数目比例由31.3%增高到72.9%。MgSiO3熔体微观结构的认识对了解地幔内硅酸盐流体性质及其对地幔动力学的影响有重要意义。%The microstructures of MgSiO3 melt and their variation with temperature and pressure were investigated based on first-principles molecular dynamic simulations at high pressures (0-144 GPa)and high temperatures (2 000-6 000 K).The calculated first peak positions of the pair correlation function of O-Si,O-Mg and O-O under the condition of 0 GPa and 2 000 K are 0.163 5,0.1 970 and 0.269 5 nm, respectively,which are consistent with the previous experimental values.As the pressure and temperature change,the structure of MgSiO3 melt undergoes a significant change.Especially when the pressure increases,the structure becomes denser.When the temperature is below 5 000 K,the average bond lengths between two atoms decrease with the increasing temperature with density 4.59 g/cm3.While under nomal or higher pressure,the average bond length change with the increasing temperature is not obvious.At 133 GPa and 4 000 K,the average bond lengths of O-Si,O-Mg and O-O are 0.161 0, 0.183 5 and 0.230 0 nm

  20. 高温高压及醋酸环境中H2S对油管钢CO2腐蚀行为的影响%Effect of H2S on CO2 Corrosion of Oil Tube Steel in High Temperature and High Pressure Environments Containing Acetic Acid

    Institute of Scientific and Technical Information of China (English)

    钱进森; 陈长风; 燕铸; 郑树启; 翁永基

    2011-01-01

    利用美国Cortest公司高温高压反应釜模拟高含硫油气田H2S/CO2及醋酸共存环境,在流动高矿化度饱和H2S/CO2介质中进行试验,辅以SEM、XRD、动电位扫描及交流阻抗等表面分析和电化学技术,探讨了高温高压及醋酸环境中H2S对油管钢CO2腐蚀行为的影响.结果表明:普通N80油管钢在单一CO2腐蚀速率较高,达到5.1 mm/a,加入H2S后腐蚀速率明显受到抑制,降幅最大的点出现在H2S分压最小处,低至0.28 mm/a,随着H2S分压的继续增大,腐蚀速率略有增加,但远低于单一CO2腐蚀速率.加入H2S后腐蚀产物以四方晶系的FeS (Mackinawite)为主,未出现FeCO3,腐蚀过程转变为H2S控制.试样的腐蚀形态以局部腐蚀为主,试样表面均出现了严重的点蚀,醋酸的存在增大了油管钢在H2S/CO2环境中产生局部腐蚀的倾向性.%Solution immersion environments containing H2S/CO2 and acetic acid were simulated in a high temperature and high pressure autoclave manufactured by UAS Cortest Company, and test was conducted in flowing H2S/CO2 medium with high salinity. The Effect of H2S on CO2 corrosion of oil tube steel were analyzed and discussed by the following electrochemistry technologies, such as SEM, XRD, dynamic potential scanning, AC impedance and etc. The results showed that the corrosion rate of N80 oil tube steel is very high, up to 5.1mm/a, when solution immersion environment contain only CO2 and acetic acid. However, with the addition of H2S, the corrosion rate is restrained obviously and the largest decreasing point is observed at the lowest partial pressure of H2S, down to 0.28 mm/a. With H2S partial pressure increasing, the corrosion rate slightly increased, but is far lower than simplex CO2 corrosion rate. With the presence of H2S, the corrosion products are mainly FeS (Mackinawite), FeCO3 doesn't appear, and corrosion is controlled by H2S. The corrosion forms of samples are mainly localized corrosion, severe pitting presents

  1. The role of viscosity in the emplacement of high-temperature acidic flows of Serra Geral Formation in Torres Syncline (Rio Grande do Sul State, Brazil

    Directory of Open Access Journals (Sweden)

    Matheus Silva Simões

    Full Text Available The acidic flows from Serra Geral Formation in Torres Syncline, Rio Grande do Sul, Brazil, are on the top of a volcanic sequence composed by a complex facies association of compound, simple and rubbly pahoehoebasic flows, acidic lava domes, and tabular acidic lava flows. The origin and emplacement conditions of the acidic volcanic rocks are discussed in this paper based on petrology, on calculated apatite saturation thermometry temperatures, and on estimated viscosity data. The liquidus temperatures for metaluminous rhyodacite to rhyolite samples are about 1,067.5 ± 25ºC in average. The viscosity (η values vary from 105 to 106 Pas for anhydrous conditions, suggesting the emplacement of high-temperature - low-viscosity lava flows and domes. The occurrence of acidic lava domes above simple pahoehoe flows as flow-banded vitrophyres was under low effusion rates, in spite of their high temperature and low viscosities, which are reflected in their small height. The emplacement of lava domes has continued until the eruption of rubbly pahoehoe flows and the geometry of these deposits rugged the relief. Presence of tabular acidic lava flows covering the landscape indicates that it was under high effusion rates conditions and such flows had well-insulated cooled surface crusts. The capacity to attain greater distances and overpass relief obstacles is explained not only by high effusion rates, but also by very low viscosities at the time of emplacement.

  2. High pressure processing of meat

    DEFF Research Database (Denmark)

    Grossi, Alberto; Christensen, Mette; Ertbjerg, Per

    in the myofibrillar protein pattern and HP-induced change in activity of cathepsin B and L were investigated. Results: In this study we showed that HP treatment of pork meat emulsion, ranging from 0.1 to 800 MPa, induced protein gel formation as shown by the increased Young’s modulus (Fig.1). Analysis of SDS...... the rheological properties of pork meat batters by inducing formation of protein gels. HP induced protein gels are suggested to be formed by high molecular weight myofibrillar protein aggregates and by peptides formed by lysosomal enzyme-induced cleavage of myofibrillar proteins. Perspectives: The data presented......Abstract Background: The research of high pressure (HP) processing of meat based foods needs to address how pressure affects protein interactions, aggregation and/or gelation. The understanding of the gel forming properties of myofibrillar components is fundamental for the development of muscle...

  3. Chromium at High Pressure

    Science.gov (United States)

    Jaramillo, Rafael

    2012-02-01

    Chromium has long served as the archetype of spin density wave magnetism. Recently, Jaramillo and collaborators have shown that Cr also serves as an archetype of magnetic quantum criticality. Using a combination of x-ray diffraction and electrical transport measurements at high pressures and cryogenic temperatures in a diamond anvil cell, they have demonstrated that the N'eel transition (TN) can be continuously suppressed to zero, with no sign of a concurrent structural transition. The order parameter undergoes a broad regime of exponential suppression, consistent with the weak coupling paradigm, before deviating from a BCS-like ground state within a narrow but accessible quantum critical regime. The quantum criticality is characterized by mean field scaling of TN and non mean field scaling of the transport coefficients, which points to a fluctuation-induced reconstruction of the critical Fermi surface. A comparison between pressure and chemical doping as means to suppress TN sheds light on different routes to the quantum critical point and the relevance of Fermi surface nesting and disorder at this quantum phase transition. The work by Jaramillo et al. is broadly relevant to the study of magnetic quantum criticality in a physically pure and theoretically tractable system that balances elements of weak and strong coupling. [4pt] [1] R. Jaramillo, Y. Feng, J. Wang & T. F. Rosenbaum. Signatures of quantum criticality in pure Cr at high pressure. Proc. Natl. Acad. Sci. USA 107, 13631 (2010). [0pt] [2] R. Jaramillo, Y. Feng, J. C. Lang, Z. Islam, G. Srajer, P. B. Littlewood, D. B. McWhan & T. F. Rosenbaum. Breakdown of the Bardeen-Cooper-Schrieffer ground state at a quantum phase transition. Nature 459, 405 (2009).

  4. Kinetics of the Formation of Intermetallic Phases in HP-Type Heat-Resistant Alloys at Long-Term High-Temperature Exposure

    Science.gov (United States)

    Kondrat'ev, Sergey Yu.; Anastasiadi, Grigoriy P.; Petrov, Sergey N.; Ptashnik, Alina V.

    2017-01-01

    The kinetics of formation and morphology of the intermetallic phases in the structure of heat-resistant as-cast HP40NbTi alloys in the course of long high-temperature exposure have been studied with the help of light and electron microscopy, electron microprobe, and X-ray diffraction. During exposure of 2 to 1000 hours at 1423 K (1150 °C), intermetallic phase with conditional formula Cr7Ni5Si3N3FeNb is formed in the alloy. The analysis of the kinetics of intermetallic phase's growth for an impact assessment of certain metal substitutional elements (niobium, chromium, silicon) on the size of the formed particles was performed. Formation and growth of the intermetallic phases with high silicon content in the alloy structure on the boundaries between niobium and chromium carbides (NbC and M23C6) and matrix γ-phase provide a diffusion barrier for oxygen in oxidizing environment. This may create partial protection against oxidation of hardening carbide phases in the structure and promote increasing of the serviceability of the HP series alloys under operating conditions in the petrochemical industry.

  5. High-pressure minerals in shocked meteorites

    Science.gov (United States)

    Tomioka, Naotaka; Miyahara, Masaaki

    2017-09-01

    Heavily shocked meteorites contain various types of high-pressure polymorphs of major minerals (olivine, pyroxene, feldspar, and quartz) and accessory minerals (chromite and Ca phosphate). These high-pressure minerals are micron to submicron sized and occur within and in the vicinity of shock-induced melt veins and melt pockets in chondrites and lunar, howardite-eucrite-diogenite (HED), and Martian meteorites. Their occurrence suggests two types of formation mechanisms (1) solid-state high-pressure transformation of the host-rock minerals into monomineralic polycrystalline aggregates, and (2) crystallization of chondritic or monomineralic melts under high pressure. Based on experimentally determined phase relations, their formation pressures are limited to the pressure range up to 25 GPa. Textural, crystallographic, and chemical characteristics of high-pressure minerals provide clues about the impact events of meteorite parent bodies, including their size and mutual collision velocities and about the mineralogy of deep planetary interiors. The aim of this article is to review and summarize the findings on natural high-pressure minerals in shocked meteorites that have been reported over the past 50 years.

  6. High-Temperature Superconductivity

    Science.gov (United States)

    Tanaka, Shoji

    2006-12-01

    A general review on high-temperature superconductivity was made. After prehistoric view and the process of discovery were stated, the special features of high-temperature superconductors were explained from the materials side and the physical properties side. The present status on applications of high-temperature superconductors were explained on superconducting tapes, electric power cables, magnets for maglev trains, electric motors, superconducting quantum interference device (SQUID) and single flux quantum (SFQ) devices and circuits.

  7. The formation of nuggets of highly siderophile elements in quenched silicate melts at high temperatures: Before or during the silicate quench?

    Science.gov (United States)

    Malavergne, V.; Charon, E.; Jones, J.; Cordier, P.; Righter, K.; Deldicque, D.; Hennet, L.

    2016-01-01

    The Highly Siderophile Elements (HSE) are powerful tracers of planetary differentiation. Despite the importance of their partitioning between silicate and metal for the understanding of planetary core formation, especially for the Earth and Mars, there is still a huge discrepancy between conclusions based on different high temperature (HT) experimental studies. These disagreements may be due to the presence of HSE micro and nanonuggets in HT experiments. The formation of these nuggets is still interpreted in different ways. One hypothesis is that these HSE nuggets formed during the quench of the silicate melt, while another hypothesis supposes that these nuggets formed before the quench and represented artefacts of HT experiments. The goal of this work is to clarify whether the presence of HSE nuggets in silicate melts is linked to a quench effect or not. Understanding the formation of these HSE nuggets represents thus a necessary step towards the resolution of the Earth's core formation scenarios. We performed new HT experiments (1275-2000 °C) at different oxygen fugacities (fO2), between ambient air up to ∼5 log units below the Iron-Wüstite buffer [IW-5], for two different silicate compositions (synthetic martian and terrestrial basalts) mixed with a metallic mixture of Pt-Au-Pd-Ru. Our 1275-1600 °C experiments were contained in either olivine, diopside or graphite crucible; experiments at 2000 °C were performed using a levitation method, so no capsule was necessary. Our samples contained quenched silicate melts, minerals (olivine, pyroxene, spinel depending on the run), a two-phase metallic bead and nano and micro-nuggets of HSE. Our samples underwent fine textural, structural and analytical characterizations. The distribution of the nuggets was not homogeneous throughout the quenched silicate melt. HSE nuggets were present within crystals. Dendritic textures from the quenched silicate melt formed around HSE nuggets, which could be crystallized, showing

  8. X-ray-induced dissociation of H.sub.2O and formation of an O.sub.2-H.sub.2 alloy at high pressure

    Science.gov (United States)

    Mao, Ho-kwang; Mao, Wendy L.

    2011-11-29

    A novel molecular alloy of O.sub.2 and H.sub.2 and a method of producing such a molecular alloy are provided. When subjected to high pressure and extensive x-radiation, H.sub.2O molecules cleaved, forming O--O and H--H bonds. In the method of the present invention, the O and H framework in ice VII was converted into a molecular alloy of O.sub.2 and H.sub.2. X-ray diffraction, x-ray Raman scattering, and optical Raman spectroscopy demonstrate that this crystalline solid differs from previously known phases.

  9. A Study on Formation and Thermal Stability of Nano-sized Oxide Clusters in Mechanically Alloyed NiAl for High Temperature Applications

    OpenAIRE

    KIM, YONG-DEOG

    2012-01-01

    The intermetallic compound, B2 NiAl, is a promising material for high temperature structural applications such as in aviation jet engines or gas turbines, provided that its high temperature mechanical properties can be improved. Although extensive efforts over the last several decades have been devoted toward enhancing ductility through alloying design and reducing impurities, as well as improving high temperature creep strength through precipitation and dispersion strengthening, these effort...

  10. [High Pressure Gas Tanks

    Science.gov (United States)

    Quintana, Rolando

    2002-01-01

    Four high-pressure gas tanks, the basis of this study, were especially made by a private contractor and tested before being delivered to NASA Kennedy Space Center. In order to insure 100% reliability of each individual tank the staff at KSC decided to again submit the four tanks under more rigorous tests. These tests were conducted during a period from April 10 through May 8 at KSC. This application further validates the predictive safety model for accident prevention and system failure in the testing of four high-pressure gas tanks at Kennedy Space Center, called Continuous Hazard Tracking and Failure Prediction Methodology (CHTFPM). It is apparent from the variety of barriers available for a hazard control that some barriers will be more successful than others in providing protection. In order to complete the Barrier Analysis of the system, a Task Analysis and a Biomechanical Study were performed to establish the relationship between the degree of biomechanical non-conformities and the anomalies found within the system on particular joints of the body. This relationship was possible to obtain by conducting a Regression Analysis to the previously generated data. From the information derived the body segment with the lowest percentage of non-conformities was the neck flexion with 46.7%. Intense analysis of the system was conducted including Preliminary Hazard Analysis (PHA), Failure Mode and Effect Analysis (FMEA), and Barrier Analysis. These analyses resulted in the identification of occurrences of conditions, which may be becoming hazardous in the given system. These conditions, known as dendritics, may become hazards and could result in an accident, system malfunction, or unacceptable risk conditions. A total of 56 possible dendritics were identified. Work sampling was performed to observe the occurrence each dendritic. The out of control points generated from a Weighted c control chart along with a Pareto analysis indicate that the dendritics "Personnel not

  11. Application of High Pressure in Food Processing

    Directory of Open Access Journals (Sweden)

    Herceg, Z.

    2011-01-01

    Full Text Available In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200 MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure processing of food include: inactivation of microorganisms, modification of biopolymers, quality retention (especially in terms of flavour and colour, and changes in product functionality. Food components responsible for the nutritive value and sensory properties of food remain unaffected by high pressure. Based on the theoretical background of high-pressure processing and taking into account its advantages and limitations, this paper aims to show its possible application in food processing. The paper gives an outline of the special equipment used in highpressure processing. Typical high pressure equipment in which pressure can be generated either by direct or indirect compression are presented together with three major types of high pressure food processing: the conventional (batch system, semicontinuous and continuous systems. In addition to looking at this technology’s ability to inactivate microorganisms at room temperature, which makes it the ultimate alternative to thermal treatments, this paper also explores its application in dairy, meat, fruit and vegetable processing. Here presented are the effects of high-pressure treatment in milk and dairy processing on the inactivation of microorganisms and the modification of milk protein, which has a major impact on rennet coagulation and curd formation properties of treated milk. The possible application of this treatment in controlling cheese manufacture, ripening and safety is discussed. The opportunities

  12. High Temperature and Pressure Alkaline Electrolysis

    DEFF Research Database (Denmark)

    Allebrod, Frank

    and oxygen with a new type of alkaline electrolysis cell at high temperatures and pressures. To perform measurements under high pressure and at elevated temperatures it was necessary to build a measurement system around an autoclave which could stand high temperatures up to 250 °C and pressures up to 200 bar...... as well as extremely caustic environments. Based on a literature study to identify resistant materials for these conditions, Inconel 600 was selected among the metals which are available for autoclave construction. An initial single atmosphere high temperature and pressure measurement setup was build...... comprising this autoclave. A second high temperature and pressure measurement setup was build based on experiences from the first setup in order to perform automatized measurements. The conductivity of aqueous KOH at elevated temperatures and high concentrations was investigated using the van der Pauw method...

  13. High temperature interfacial superconductivity

    Science.gov (United States)

    Bozovic, Ivan [Mount Sinai, NY; Logvenov, Gennady [Port Jefferson Station, NY; Gozar, Adrian Mihai [Port Jefferson, NY

    2012-06-19

    High-temperature superconductivity confined to nanometer-scale interfaces has been a long standing goal because of potential applications in electronic devices. The spontaneous formation of a superconducting interface in bilayers consisting of an insulator (La.sub.2CuO.sub.4) and a metal (La.sub.1-xSr.sub.xCuO.sub.4), neither of which is superconducting per se, is described. Depending upon the layering sequence of the bilayers, T.sub.c may be either .about.15 K or .about.30 K. This highly robust phenomenon is confined to within 2-3 nm around the interface. After exposing the bilayer to ozone, T.sub.c exceeds 50 K and this enhanced superconductivity is also shown to originate from a 1 to 2 unit cell thick interfacial layer. The results demonstrate that engineering artificial heterostructures provides a novel, unconventional way to fabricate stable, quasi two-dimensional high T.sub.c phases and to significantly enhance superconducting properties in other superconductors. The superconducting interface may be implemented, for example, in SIS tunnel junctions or a SuFET.

  14. Metallic Re-Re bond formation in different MRe 2O 6 ( Mdbnd Fe, Co, Ni) rutile-like polymorphs: The role of temperature in high-pressure synthesis

    Science.gov (United States)

    Mikhailova, D.; Ehrenberg, H.; Oswald, S.; Trots, D.; Brey, G.; Fuess, H.

    2009-02-01

    Different polymorphs of MRe 2O 6 ( Mdbnd Fe, Co, Ni) with rutile-like structures were prepared using high-pressure high-temperature synthesis. For syntheses temperatures higher than ˜1573 K, tetragonal rutile-type structures ( P4 2/ mnm) with a statistical distribution of M- and Re-atoms on the metal position in the structure were observed for all three compounds, whereas rutile-like structures with orthorhombic or monoclinic symmetry, partially ordered M- and Re-ions on different sites and metallic Re-Re-bonds within Re 2O 10-pairs were found for CoRe 2O 6 and NiRe 2O 6 at a synthesis temperature of 1473 K. According to the XPS measurements, a mixture of Re +4/Re +6 and M2+/ M3+ is present in both structural modifications of CoRe 2O 6 and NiRe 2O 6. The low-temperature forms contain more Re +4 and M 3+ than the high-temperature forms. Tetragonal and monoclinic modifications of NiRe 2O 6 order with a ferromagnetic component at ˜24 K, whereas tetragonal and orthorhombic CoRe 2O 6 show two magnetic transitions: below ˜17.5 and 27 K for the tetragonal and below 18 and 67 K for the orthorhombic phase. Tetragonal FeRe 2O 6 is antiferromagnetic below 123 K.

  15. Modelling of Filling, Microstructure Formation, Local Mechanical Properties and Stress – Strain Development in High-Pressure Die Cast Aluminium Castings

    DEFF Research Database (Denmark)

    Kotas, Petr; Hattel, Jesper Henri; Thorborg, Jesper

    2009-01-01

    inherently affects the component’s properties depending on design, metallurgy and casting technique. The wall thickness influences the coarseness of the microstructure and the material will have properties depending on the local metallurgical and thermal histories. This is independent on the material, i.......e. whether the casting is based on cast iron- or aluminium-alloys. The distribution of local properties in a casting might vary substantially which makes it complex to optimize the casting with good accuracy. Often, mechanical simulations of the load situation are based on the assumption that the cast...... product has constant material properties throughout the entire casting. Thus, if the microstructure is determined or predicted at a given point, it gives the possibility to calculate the local material behavior more realistically. In the present work, a test case of a complex high-pressure die cast part...

  16. A Phenomenological Model for Prediction Auto-Ignition and Soot Formation of Turbulent Diffusion Combustion in a High Pressure Common Rail Diesel Engine

    Directory of Open Access Journals (Sweden)

    Qinghui Zhou

    2011-06-01

    Full Text Available A new phenomenological model, the TP (Temperature Phase model, is presented to carry out optimization calculations for turbulent diffusion combustion in a high-pressure common rail diesel engine. Temperature is the most important parameter in the TP model, which includes two parts: an auto-ignition and a soot model. In the auto-ignition phase, different reaction mechanisms are built for different zones. For the soot model, different methods are used for different temperatures. The TP model is then implemented in KIVA code instead of original model to carry out optimization. The results of cylinder pressures, the corresponding heat release rates, and soot with variation of injection time, variation of rail pressure and variation of speed among TP model, KIVA standard model and experimental data are analyzed. The results indicate that the TP model can carry out optimization and CFD (computational fluid dynamics and can be a useful tool to study turbulent diffusion combustion.

  17. Formation of Fe{sub 86}Zr{sub 5.5}Nb{sub 5.5}B{sub 3} nanocrystalline bulk alloy under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Lu Bin [Central South Univ., School of Materials Science and Engineering, Changsha (China); Tongji Univ., School of Materials and Science Engineering, Shanghai, SH (China); Xi' an Jiaotong Univ., Xi' an (China); Northwest Inst. for Non-ferrous Metal Research, Xi' an (China); Yi Danqing; Liu Huiqun; Wu Biaoli; Chen Xiaoli [Central South Univ., School of Materials Science and Engineering, Changsha (China); Xi' an Jiaotong Univ., Xi' an (China); Yan Biao; Yin Junlin [Tongji Univ., School of Materials and Science Engineering, Shanghai, SH (China); Liu Yan [Chinese Academy of Sciences Shanghai Inst. of Ceramics, Shanghai, SH (China)

    2005-07-01

    Mechanical alloying(MA) technique and single-roller melt spinning technique were used to prepare Fe{sub 86}Zr{sub 5.5}Nb{sub 5.5}B{sub 3} nanocrystalline and amorphous powders, bulk alloys were prepared by cryogenically high-pressure quick sintering. The results showed that: (1) after MA process for 15 hours, the grain size of {alpha}-Fe phase was {<=}10 nm; (2) melt spinning powders were fragmented by ball milling, but remained amorphous state. The crystallization temperature of this amorphous powder was about 500 C. Apparent activation energy of the amorphous crystallization was E=294.1 KJ/mol; (3) under the quick sintering conditions of P=5.5 GPa/t=3min/P{sub w}{>=}1050 W, single phase {alpha}-Fe nanocrystalline(8{proportional_to}15nm) bulk alloys with relative density {>=}98.7% can be obtained. (orig.)

  18. High temperature battery. Hochtemperaturbatterie

    Energy Technology Data Exchange (ETDEWEB)

    Bulling, M.

    1992-06-04

    To prevent heat losses of a high temperature battery, it is proposed to make the incoming current leads in the area of their penetration through the double-walled insulating housing as thermal throttle, particularly spiral ones.

  19. High-pressure neutron diffraction

    Energy Technology Data Exchange (ETDEWEB)

    Xu, Hongwu [Los Alamos National Laboratory

    2011-01-10

    This lecture will cover progress and prospect of applications of high-pressure neutron diffraction techniques to Earth and materials sciences. I will first introduce general high-pressure research topics and available in-situ high-pressure techniques. Then I'll talk about high-pressure neutron diffraction techniques using two types of pressure cells: fluid-driven and anvil-type cells. Lastly, I will give several case studies using these techniques, particularly, those on hydrogen-bearing materials and magnetic transitions.

  20. High-Temperature Optical Sensor

    Science.gov (United States)

    Adamovsky, Grigory; Juergens, Jeffrey R.; Varga, Donald J.; Floyd, Bertram M.

    2010-01-01

    A high-temperature optical sensor (see Figure 1) has been developed that can operate at temperatures up to 1,000 C. The sensor development process consists of two parts: packaging of a fiber Bragg grating into a housing that allows a more sturdy thermally stable device, and a technological process to which the device is subjected to in order to meet environmental requirements of several hundred C. This technology uses a newly discovered phenomenon of the formation of thermally stable secondary Bragg gratings in communication-grade fibers at high temperatures to construct robust, optical, high-temperature sensors. Testing and performance evaluation (see Figure 2) of packaged sensors demonstrated operability of the devices at 1,000 C for several hundred hours, and during numerous thermal cycling from 400 to 800 C with different heating rates. The technology significantly extends applicability of optical sensors to high-temperature environments including ground testing of engines, flight propulsion control, thermal protection monitoring of launch vehicles, etc. It may also find applications in such non-aerospace arenas as monitoring of nuclear reactors, furnaces, chemical processes, and other hightemperature environments where other measurement techniques are either unreliable, dangerous, undesirable, or unavailable.

  1. High-Pressure Lightweight Thrusters

    Science.gov (United States)

    Holmes, Richard; McKechnie, Timothy; Shchetkovskiy, Anatoliy; Smirnov, Alexander

    2013-01-01

    Returning samples of Martian soil and rock to Earth is of great interest to scientists. There were numerous studies to evaluate Mars Sample Return (MSR) mission architectures, technology needs, development plans, and requirements. The largest propulsion risk element of the MSR mission is the Mars Ascent Vehicle (MAV). Along with the baseline solid-propellant vehicle, liquid propellants have been considered. Similar requirements apply to other lander ascent engines and reaction control systems. The performance of current state-ofthe- art liquid propellant engines can be significantly improved by increasing both combustion temperature and pressure. Pump-fed propulsion is suggested for a single-stage bipropellant MAV. Achieving a 90-percent stage propellant fraction is thought to be possible on a 100-kg scale, including sufficient thrust for lifting off Mars. To increase the performance of storable bipropellant rocket engines, a high-pressure, lightweight combustion chamber was designed. Iridium liner electrodeposition was investigated on complex-shaped thrust chamber mandrels. Dense, uniform iridium liners were produced on chamber and cylindrical mandrels. Carbon/carbon composite (C/C) structures were braided over iridium-lined mandrels and densified by chemical vapor infiltration. Niobium deposition was evaluated for forming a metallic attachment flange on the carbon/ carbon structure. The new thrust chamber was designed to exceed state-of-the-art performance, and was manufactured with an 83-percent weight savings. High-performance C/Cs possess a unique set of properties that make them desirable materials for high-temperature structures used in rocket propulsion components, hypersonic vehicles, and aircraft brakes. In particular, more attention is focused on 3D braided C/Cs due to their mesh-work structure. Research on the properties of C/Cs has shown that the strength of composites is strongly affected by the fiber-matrix interfacial bonding, and that weakening

  2. High Temperature Electrolysis

    DEFF Research Database (Denmark)

    Elder, Rachael; Cumming, Denis; Mogensen, Mogens Bjerg

    2015-01-01

    High temperature electrolysis of carbon dioxide, or co-electrolysis of carbon dioxide and steam, has a great potential for carbon dioxide utilisation. A solid oxide electrolysis cell (SOEC), operating between 500 and 900. °C, is used to reduce carbon dioxide to carbon monoxide. If steam is also...... input to the cell then hydrogen is produced giving syngas. This syngas can then be further reacted to form hydrocarbon fuels and chemicals. Operating at high temperature gives much higher efficiencies than can be achieved with low temperature electrolysis. Current state of the art SOECs utilise a dense...

  3. Effect of State Equation on Numerical Simulation of Fuel Droplet Evaporation at High Temperature and High Pressure%状态方程对高温高压条件下燃料液滴蒸发计算的影响

    Institute of Scientific and Technical Information of China (English)

    李云清; 王宏楠; 王德福

    2009-01-01

    This paper proposed a high pressure evaporation model and numerical simulation method for a single droplet on the base of real gas equation of state (EOS). The evaporation process of n-heptane drop-let in nitrogen was simulated. The influence of Redlich-Kwong (RK) EOS, Soave-Redlich-Kwong (SRK) EOS and Peng-Robinson (PR) EOS on the calculation of fuel droplet's evaporation was discussed. PR EOS shows good agreement with experimental data in vapor-liquid phase equilibrium ( VLE), thermophys-ical properties and the variation of droplet diameter. SRK EOS is close to the results of PR EOS in VLE, critical state of binary mixture and n-heptane's enthalpies of evaporation. But SRK EOS's calculation re-suits are smaller than that of PR EOS in thermophysical properties and evaporation lifetime of droplet. RK EOS's calculation results are obviously different to that of SRK EOS and PR EOS. The highest accuracy of high pressure evaporation model for a single droplet is the PR EOS, flowing by SRK EOS and RK EOS.%以实际气体状态方程为基础,建立了单个液滴的高压蒸发模型和数值计算方法,并对庚烷液滴在氮气中的蒸发过程进行了模拟计算.重点研究了RK、SRK、PR三种状态方程对高温高压条件下燃料液滴蒸发计算的影响.结果表明,PR方程在气液相平衡、热物性参数以及液滴直径变化历程的计算上都与试验数据有很好的一致性;SRK方程在气液相平衡、二元混合物临界点以及庚烷相变焓的计算上与PR方程的计算结果十分接近,但在热物性参数和液滴蒸发寿命的计算上相比于PR方程的计算结果偏小;RK方程的计算结果与SRK方程和PR方程相比均存在较大偏差.因此,对于建立单个液滴高压蒸发模型而言,PR方程的精度最高,SRK方程次之,RK方程的精度最差.

  4. Screening of hydrogen storage media applying high pressure thermogravimetry

    DEFF Research Database (Denmark)

    Bentzen, J.J.; Pedersen, Allan Schrøder; Kjøller, J.

    2001-01-01

    A number of commercially available hydride-forming alloys of the MmNi5–xSnx (Mm=mischmetal, a mixture of lanthanides) type were examined using a high pressure, high temperature microbalance,scanning electron microscopy and X-ray diffraction. Activation conditions, reversible storage capacity, wor...

  5. Lu-Hf systematics of the ultra-high temperature Napier Complex, East Antarctica: evidence for the early Archean formation of continental crust

    Science.gov (United States)

    Choi, S.; Mukasa, S. B.; Andronikov, A. V.; Osanai, Y.; Harley, S. L.; Kelly, N. M.

    2009-12-01

    The Napier Complex in East Antarctica comprises some of the oldest rocks on earth (~3.8 billion years old), overprinted by an ultra-high temperature (UHT) metamorphic event near the Archean-Proterozoic boundary. Garnet, orthopyroxene, sapphirine, osumilite, rutile and a whole rock representing an equilibrated assemblage from this belt yield a Lu-Hf isochron age of 2,403 ± 43 Ma. Preservation of the UHT mineral assemblage in the rock analyzed suggests rapid cooling with closure likely to have occurred for the Lu-Hf system at post-peak UHT conditions near a temperature of ~800C. Individual zircon grains from Gage Ridge within the Napier Complex yielded a remarkably uniform range of 176Hf/177Hf values between 0.280433 ± 7 and 0.280505 ± 10, corresponding to ɛHf > +5.6 at 3.85 Ga relative to the chondritic uniform reservoir (CHUR). Because of their exceedingly low Lu/Hf values (<0.001), the grains are effectively recording the initial Hf isotope composition of the magmatic systems from which the gneiss protoliths crystallized. These results indicate that (1) the source of the crustal materials that formed the Napier Complex at 3.85 Ga were depleted relative to the CHUR. The extent of depletion involved is higher than has been predicted by extrapolation from the Lu-Hf isotopic evolution inferred for the source of Proterozoic and Phanerozoic basalts, judging from an fLu/Hf value of 0.51, (2) the depleted mantle reservoir has been in existence since very early in Earth’s history, in agreement with the early differentiation of the Earth that the latest core formation models require, and (3) an extremely depleted source also mean that the bulk of continental crust was extracted from the mantle by ~3.8 Ga. Moreover, the results demonstrate that even the oldest silicic rocks in the complex are not likely to have formed from remobilized older crustal materials, but were instead juvenile products of mantle melting. In addition, zircons with metamorphic rims have a similar

  6. High temperature storage loop :

    Energy Technology Data Exchange (ETDEWEB)

    Gill, David Dennis; Kolb, William J.

    2013-07-01

    A three year plan for thermal energy storage (TES) research was created at Sandia National Laboratories in the spring of 2012. This plan included a strategic goal of providing test capability for Sandia and for the nation in which to evaluate high temperature storage (>650ÀC) technology. The plan was to scope, design, and build a flow loop that would be compatible with a multitude of high temperature heat transfer/storage fluids. The High Temperature Storage Loop (HTSL) would be reconfigurable so that it was useful for not only storage testing, but also for high temperature receiver testing and high efficiency power cycle testing as well. In that way, HTSL was part of a much larger strategy for Sandia to provide a research and testing platform that would be integral for the evaluation of individual technologies funded under the SunShot program. DOEs SunShot program seeks to reduce the price of solar technologies to 6/kWhr to be cost competitive with carbon-based fuels. The HTSL project sought to provide evaluation capability for these SunShot supported technologies. This report includes the scoping, design, and budgetary costing aspects of this effort

  7. HIGH TEMPERATURE DISPLACEMENT SENSOR

    Institute of Scientific and Technical Information of China (English)

    Xu Longxiang; Zhang Jinyu; Schweitzer Gerhard

    2005-01-01

    A high temperature displacement sensor based on the principle of eddy-current is investigated. A new temperature compensation technique by using eddy-current effect is presented to satisfy the special requirement at high temperature up to 550℃. The experiment shows that the temperature compensation technique leads to good temperature stability for the sensors. The variation of the sensitivity as well as the temperature drift of the sensor with temperature compensation technique is only about 7.4% and 90~350 mV at 550℃ compared with that at room temperature, and that of the sensor without temperature compensation technique is about 31.2% and 2~3 V at 550℃ compared with that at room temperature. A new dynamic calibration method for the eddy-current displacement sensor is presented, which is very easy to be realized especially in high frequency and at high temperatures. The high temperature displacement sensors developed are successfully used at temperature up to 550℃ in a magnetic bearing system for more than 100 h.

  8. High-temperature superconductors

    CERN Document Server

    Saxena, Ajay Kumar

    2010-01-01

    The present book aims at describing the phenomenon of superconductivity and high-temperature superconductors discovered by Bednorz and Muller in 1986. The book covers the superconductivity phenomenon, structure of high-Tc superconductors, critical currents, synthesis routes for high Tc materials, superconductivity in cuprates, the proximity effect and SQUIDs, theories of superconductivity and applications of superconductors.

  9. High temperature storage loop :

    Energy Technology Data Exchange (ETDEWEB)

    Gill, David Dennis; Kolb, William J.

    2013-07-01

    A three year plan for thermal energy storage (TES) research was created at Sandia National Laboratories in the spring of 2012. This plan included a strategic goal of providing test capability for Sandia and for the nation in which to evaluate high temperature storage (>650ÀC) technology. The plan was to scope, design, and build a flow loop that would be compatible with a multitude of high temperature heat transfer/storage fluids. The High Temperature Storage Loop (HTSL) would be reconfigurable so that it was useful for not only storage testing, but also for high temperature receiver testing and high efficiency power cycle testing as well. In that way, HTSL was part of a much larger strategy for Sandia to provide a research and testing platform that would be integral for the evaluation of individual technologies funded under the SunShot program. DOEs SunShot program seeks to reduce the price of solar technologies to 6/kWhr to be cost competitive with carbon-based fuels. The HTSL project sought to provide evaluation capability for these SunShot supported technologies. This report includes the scoping, design, and budgetary costing aspects of this effort

  10. Raman Spectroscopy at High Pressures

    Directory of Open Access Journals (Sweden)

    Alexander F. Goncharov

    2012-01-01

    Full Text Available Raman spectroscopy is one of the most informative probes for studies of material properties under extreme conditions of high pressure. The Raman techniques have become more versatile over the last decades as a new generation of optical filters and multichannel detectors become available. Here, recent progress in the Raman techniques for high-pressure research and its applications in numerous scientific disciplines including physics and chemistry of materials under extremes, earth and planetary science, new materials synthesis, and high-pressure metrology will be discussed.

  11. Magnetic and Superconducting Materials at High Pressures

    Energy Technology Data Exchange (ETDEWEB)

    Struzhkin, Viktor V. [Carnegie Inst. of Washington, Washington, DC (United States)

    2015-03-24

    The work concentrates on few important tasks in enabling techniques for search of superconducting compressed hydrogen compounds and pure hydrogen, investigation of mechanisms of high-Tc superconductivity, and exploring new superconducting materials. Along that route we performed several challenging tasks, including discovery of new forms of polyhydrides of alkali metal Na at very high pressures. These experiments help us to establish the experimental environment that will provide important information on the high-pressure properties of hydrogen-rich compounds. Our recent progress in RIXS measurements opens a whole field of strongly correlated 3d materials. We have developed a systematic approach to measure major electronic parameters, like Hubbard energy U, and charge transfer energy Δ, as function of pressure. This technique will enable also RIXS studies of magnetic excitations in iridates and other 5d materials at the L edge, which attract a lot of interest recently. We have developed new magnetic sensing technique based on optically detected magnetic resonance from NV centers in diamond. The technique can be applied to study superconductivity in high-TC materials, to search for magnetic transitions in strongly correlated and itinerant magnetic materials under pressure. Summary of Project Activities; development of high-pressure experimentation platform for exploration of new potential superconductors, metal polyhydrides (including newly discovered alkali metal polyhydrides), and already known superconductors at the limit of static high-pressure techniques; investigation of special classes of superconducting compounds (high-Tc superconductors, new superconducting materials), that may provide new fundamental knowledge and may prove important for application as high-temperature/high-critical parameter superconductors; investigation of the pressure dependence of superconductivity and magnetic/phase transformations in 3d transition metal compounds, including

  12. Starch granule formation and protein deposition in wheat (Triticum aestivum L.) starchy endosperm cells is altered by high temperature during grain fill

    Science.gov (United States)

    Hurkman, William J.; Wood, Delilah F.

    2010-06-01

    High temperatures during wheat grain fill decrease starch and protein levels, adversely affecting wheat yield and flour quality. To determine the effect of high temperature on starchy endosperm cell development, grain (Triticum aestivum L. 'Butte 86') was produced under a 24/17°C or 37/28°C day/night regimen imposed from flowering to maturity and starch and protein deposition examined using scanning electron microscopy. The high temperature regimen shortened the duration of grain fill from 40 to 18 days. Under the 37/28°C regimen, A- and B-type starch granules decreased in size. A-type starch granules also exhibited pitting, suggesting enhanced action of starch degradative enzymes. Under both temperature regimens, protein bodies originated early in development and coalesced during mid to late development to form a continuous protein matrix surrounding the starch granules. Under the 37/28°C regimen, the proportion of protein matrix increased in endosperm cells of mature grain. Taken together, the changes in starch granule number and size and in protein matrix amount provide clues for understanding how high temperature during grain fill can affect end use properties of wheat flour.

  13. High-Pressure Jet Drilling Technology in Jurassic Formation in Eastern Sichuan%川东天东区块侏罗系地层高压喷射钻井技术

    Institute of Scientific and Technical Information of China (English)

    古光平; 周永建; 卓云; 汪崇华; 兰太华; 曾庆旭

    2012-01-01

    针对川东天东区块上部侏罗系砂泥岩地层机械钻速不高的钻井难题,开展了高压喷射钻井现场试验.选择侏罗系为主要试验地层,三叠系须家河组为探索试验地层,应用HJT537GK、HJT617G型钻头,配备全新钻铤和钻杆,采用三强结构聚合物无固相钻井液体系,强化钻井参数,分为第一、第二阶段主要试验和第三阶段探索试验,在天东区块进行了高压喷射钻井试验.试验中最高泵压达到31 MPa,平均机械钻速7.45 m/h,与应用常规钻井技术的邻井相比,相同地层钻速提高80%,钻井周期平均缩短3~4 d.%As the ROP is not high when penetrating into the Jurassic in Eastern Sichuan Field, the high-pressure jet drilling test was carried out. The Jurassic was the main experiment formation and Xujiahe Formation of Triassic is the pilot experiment formation. The bits with Model HJT537GK and HJT617G and new drill collar as well as drill pipe were used. Solid free drilling fluid system of "three-strengths" structure was adopted to intensify the drilling parameters. Main experiments were conducted in stage 1 and stage 2 and exploring experiment in stage 3. The high pressure jet drilling experiment was conducted in TD Block, the highest pump pressure during the experiment was 31 MPa and the average ROP was 7. 45 m/h, 80% higher than conventional drilling in offset wells in same formation. The average drilling time was shortened by 3 to 4 days. High pressure jet drilling experiment has been successful for raising drilling rate, and reached the expected goal.

  14. Applications of high pressure differential scanning calorimetry to aviation fuel thermal stability research

    Science.gov (United States)

    Neveu, M. C.; Stocker, D. P.

    1985-01-01

    High pressure differential scanning calorimetry (DSC) was studied as an alternate method for performing high temperature fuel thermal stability research. The DSC was used to measure the heat of reaction versus temperature of a fuel sample heated at a programmed rate in an oxygen pressurized cell. Pure hydrocarbons and model fuels were studied using typical DSC operating conditions of 600 psig of oxygen and a temperature range from ambient to 500 C. The DSC oxidation onset temperature was determined and was used to rate the fuels on thermal stability. Kinetic rate constants were determined for the global initial oxidation reaction. Fuel deposit formation is measured, and the high temperature volatility of some tetralin deposits is studied by thermogravimetric analysis. Gas chromatography and mass spectrometry are used to study the chemical composition of some DSC stressed fuels.

  15. Desulfurization at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Panula-Nikkilae, E.; Kurkela, E.; Mojtahedi, W.

    1987-01-01

    Two high-temperature desulfurization methods, furnace injection and gasification-desulfurization are presented. In furnace injection, the efficiency of desulfurization is 50-60%, but this method is applied in energy production plants, where flue gas desulfurization cannot be used. Ca-based sorbents are used as desulfurization material. Factors affecting desulfurization and the effect of injection on the boiler and ash handling are discussed. In energy production based on gasification, very low sulfur emissions can be achieved by conventional low-temperature cleanup. However, high-temperature gas cleaning leads to higher efficiency and can be applied to smaller size classes. Ca-, Fe-, or Zn-based sorbents or mixed metals can be used for desulfurization. Most of the methods under development are based on the use of regenerative sorbents in a cleanup reactor located outside the gasifier. So far, only calcium compounds have been used for desulfurization inside the gasifier.

  16. Strangeness at high temperatures

    CERN Document Server

    Schmidt, Christian

    2013-01-01

    We use up to fourth order cumulants of net strangeness fluctuations and their correlations with net baryon number fluctuations to extract information on the strange meson and baryon contribution to the low temperature hadron resonance gas, the dissolution of strange hadronic states in the crossover region of the QCD transition and the quasi-particle nature of strange quark contributions to the high temperature quark-gluon plasma phase.

  17. High Temperature Aquifer Storage

    Science.gov (United States)

    Ueckert, Martina; Niessner, Reinhard; Baumann, Thomas

    2016-04-01

    Combined heat and power generation (CHP) is highly efficient because excess heat is used for heating and/or process energy. However, the demand of heat energy varies considerably throughout the year while the demand for electrical energy is rather constant. It seems economically and ecologically highly beneficial for municipalities and large power consumers such as manufacturing plants to store excess heat in groundwater aquifers and to recuperate this energy at times of higher demand. Within the project High Temperature Aquifer Storage, scientists investigate storage and recuperation of excess heat energy into the bavarian Malm aquifer. Apart from high transmissivity and favorable pressure gradients, the hydrochemical conditions are crucial for long-term operation. An enormous technical challenge is the disruption of the carbonate equilibrium - modeling results indicated a carbonate precipitation of 10 - 50 kg/d in the heat exchangers. The test included five injection pulses of hot water (60 °C up to 110 °C) and four tracer pulses, each consisting of a reactive and a conservative fluorescent dye, into a depth of about 300 m b.s.l. resp. 470 m b.s.l. Injection and production rates were 15 L/s. To achieve the desired water temperatures, about 4 TJ of heat energy were necessary. Electrical conductivity, pH and temperature were recorded at a bypass where also samples were taken. A laboratory container at the drilling site was equipped for analysing the concentration of the dyes and the major cations at sampling intervals of down to 15 minutes. Additional water samples were taken and analysed in the laboratory. The disassembled heat exchanger prooved that precipitation was successfully prevented by adding CO2 to the water before heating. Nevertheless, hydrochemical data proved both, dissolution and precipitation processes in the aquifer. This was also suggested by the hydrochemical modelling with PhreeqC and is traced back to mixture dissolution and changing

  18. In situ study of mass transfer in aqueous solutions under high pressures via Raman spectroscopy: A new method for the determination of diffusion coefficients of methane in water near hydrate formation conditions

    Science.gov (United States)

    Lu, W.J.; Chou, I.-Ming; Burruss, R.C.; Yang, M.Z.

    2006-01-01

    A new method was developed for in situ study of the diffusive transfer of methane in aqueous solution under high pressures near hydrate formation conditions within an optical capillary cell. Time-dependent Raman spectra of the solution at several different spots along the one-dimensional diffusion path were collected and thus the varying composition profile of the solution was monitored. Diffusion coefficients were estimated by the least squares method based on the variations in methane concentration data in space and time in the cell. The measured diffusion coefficients of methane in water at the liquid (L)-vapor (V) stable region and L-V metastable region are close to previously reported values determined at lower pressure and similar temperature. This in situ monitoring method was demonstrated to be suitable for the study of mass transfer in aqueous solution under high pressure and at various temperature conditions and will be applied to the study of nucleation and dissolution kinetics of methane hydrate in a hydrate-water system where the interaction of methane and water would be more complicated than that presented here for the L-V metastable condition. ?? 2006 Society for Applied Spectroscopy.

  19. Production of nanograined intermetallics using high-pressure torsion

    Energy Technology Data Exchange (ETDEWEB)

    Alhamidi, Ali; Edalati, Kaveh; Horita, Zenji, E-mail: horita@zaiko.kyushu-u.ac.jp [Department of Materials Science and Engineering, Faculty of Engineering, Kyushu University, Fukuoka (Japan)

    2013-11-01

    Formation of intermetallics is generally feasible at high temperatures when the lattice diffusion is fast enough to form the ordered phases. This study shows that nanograined intermetallics are formed at a low temperature as 573 K in Al- 25 mol% Ni, Al- 50 mol.% Ni and Al- 50 mol% Ti powder mixtures through powder consolidation using high-pressure torsion (HPT). For the three compositions, the hardness gradually increases with straining but saturates to the levels as high as 550-920 Hv. In addition to the high hardness, the TiAl material exhibits high yield strength as {approx}3 GPa with good ductility as {approx}23%, when they are examined by micropillar compression tests. X-ray diffraction analysis and high-resolution transmission electron microscopy reveal that the significant increase in hardness and strength is due to the formation of nanograined intermetallics such as Al{sub 3}Ni, Al{sub 3}Ni{sub 2}, TiAl{sub 3}, TiAl{sub 2} and TiAl with average grain sizes of 20-40 nm (author)

  20. Production of nanograined intermetallics using high-pressure torsion

    Energy Technology Data Exchange (ETDEWEB)

    Alhamidi, Ali; Edalati, Kaveh; Horita, Zenji, E-mail: horita@zaiko.kyushu-u.ac.jp [Department of Materials Science and Engineering, Faculty of Engineering, Kyushu University, Fukuoka (Japan)

    2013-11-01

    Formation of intermetallics is generally feasible at high temperatures when the lattice diffusion is fast enough to form the ordered phases. This study shows that nanograined intermetallics are formed at a low temperature as 573 K in Al- 25 mol% Ni, Al- 50 mol.% Ni and Al- 50 mol% Ti powder mixtures through powder consolidation using high-pressure torsion (HPT). For the three compositions, the hardness gradually increases with straining but saturates to the levels as high as 550-920 Hv. In addition to the high hardness, the TiAl material exhibits high yield strength as {approx}3 GPa with good ductility as {approx}23%, when they are examined by micropillar compression tests. X-ray diffraction analysis and high-resolution transmission electron microscopy reveal that the significant increase in hardness and strength is due to the formation of nanograined intermetallics such as Al{sub 3}Ni, Al{sub 3}Ni{sub 2}, TiAl{sub 3}, TiAl{sub 2} and TiAl with average grain sizes of 20-40 nm (author)

  1. High temperature superconductors

    CERN Document Server

    Paranthaman, Parans

    2010-01-01

    This essential reference provides the most comprehensive presentation of the state of the art in the field of high temperature superconductors. This growing field of research and applications is currently being supported by numerous governmental and industrial initiatives in the United States, Asia and Europe to overcome grid energy distribution issues. The technology is particularly intended for densely populated areas. It is now being commercialized for power-delivery devices, such as power transmission lines and cables, motors and generators. Applications in electric utilities include current limiters, long transmission lines and energy-storage devices that will help industries avoid dips in electric power.

  2. CO2 corrosion morphology of X70 pipeline steel under jet impingement at high temperature and high pressure environment%高温高压喷射条件下X70管线钢的CO2腐蚀形貌

    Institute of Scientific and Technical Information of China (English)

    蔡峰; 柳伟; 樊学华; 张晶; 路民旭

    2014-01-01

    利用自主研发的高温高压环路喷射装置并结合流体动力学模拟计算,研究了高温高压CO2环境流体喷射条件下X70钢的腐蚀产物微观形貌、基体表面三维形貌、腐蚀减薄量及其统计规律,并探讨了与流体状态之间的关系。结果表明,高温高压流体喷射条件下,不同流态区域内流体传质速率和壁面切应力的差异是造成X70钢腐蚀产物、基体表面三维形貌及腐蚀减薄量差异的主要原因。按照层流区→壁面喷射区→过渡区的顺序,流体壁面切应力逐渐增加,不断减薄腐蚀产物膜直至其脱落,造成传质过程阻力减小,传质速率增大,腐蚀过程不断加剧。因此,按照层流区→壁面喷射区→过渡区的顺序,X70钢表面腐蚀产物膜由完整致密向疏松多孔变化,基体表面三维形貌呈现平坦→陡峭→非常陡峭的特征,三维表面高度偏差和均方根偏差、腐蚀减薄量平均值和标准差均呈现逐渐增大的趋势。在高温高压流体喷射条件下,X70钢的CO2腐蚀速率与壁面切应力之间较好地满足指数关系。%The CO2 corrosion behavior of X70 pipeline steel, including the corrosion product's morphology, three-dimensional sur-face topography, and corrosion thickness reduction as well as its statistical analysis, was investigated in high temperature and high pres-sure CO2 environment using self-developed loop jet impingement apparatus and computation fluid dynamic ( CFD) technique. The rela-tionship between the obtained results and flow regimes under jet impingement was also discussed. It is found that the differences of fluid mass transfer and wall shear stress distributed on the steel surface located at different flow regimes are the main reason for the differ-ences of the corrosion product's morphology, three-dimensional surface topography and corrosion thickness reduction. According to the order of the laminar zone, the wall jet zone and the transition zone, the

  3. Nanomaterials under high-pressure.

    Science.gov (United States)

    San-Miguel, Alfonso

    2006-10-01

    The use of high-pressure for the study and elaboration of homogeneous nanostructures is critically reviewed. Size effects, the interaction between nanostructures and guest species or the interaction of the nanosystem with the pressure transmitting medium are emphasized. Phase diagrams and the possibilities opened by the combination of pressure and temperature for the elaboration of new nanomaterials is underlined through the examination of three different systems: nanocrystals, nano-cage materials which include fullerites and group-14 clathrates, and single wall nanotubes. This tutorial review is addressed to scientist seeking an introduction or a panoramic view of the study of nanomaterials under high-pressure.

  4. High temperature superconducting compounds

    Science.gov (United States)

    Goldman, Allen M.

    1992-11-01

    The major accomplishment of this grant has been to develop techniques for the in situ preparation of high-Tc superconducting films involving the use of ozone-assisted molecular beam epitaxy. The techniques are generalizable to the growth of trilayer and multilayer structures. Films of both the DyBa2Cu3O(7-x) and YBa2Cu3O(7-x) compounds as well as the La(2-x)Sr(x)CuO4 compound have been grown on the usual substrates, SrTiO3, YSZ, MgO, and LaAlO3, as well as on Si substrates without any buffer layer. A bolometer has been fabricated on a thermally isolated SiN substrate coated with YSZ, an effort carried out in collaboration with Honeywell Inc. The deposition process facilitates the fabrication of very thin and transparent films creating new opportunities for the study of superconductor-insulator transitions and the investigation of photo-doping with carriers of high temperature superconductors. In addition to a thin film technology, a patterning technology has been developed. Trilayer structures have been developed for FET devices and tunneling junctions. Other work includes the measurement of the magnetic properties of bulk single crystal high temperature superconductors, and in collaboration with Argonne National Laboratory, measurement of electric transport properties of T1-based high-Tc films.

  5. High pressure neon arc lamp

    Science.gov (United States)

    Sze, Robert C.; Bigio, Irving J.

    2003-07-15

    A high pressure neon arc lamp and method of using the same for photodynamic therapies is provided. The high pressure neon arc lamp includes a housing that encloses a quantity of neon gas pressurized to about 500 Torr to about 22,000 Torr. At each end of the housing the lamp is connected by electrodes and wires to a pulse generator. The pulse generator generates an initial pulse voltage to breakdown the impedance of the neon gas. Then the pulse generator delivers a current through the neon gas to create an electrical arc that emits light having wavelengths from about 620 nanometers to about 645 nanometers. A method for activating a photosensitizer is provided. Initially, a photosensitizer is administered to a patient and allowed time to be absorbed into target cells. Then the high pressure neon arc lamp is used to illuminate the target cells with red light having wavelengths from about 620 nanometers to about 645 nanometers. The red light activates the photosensitizers to start a chain reaction that may involve oxygen free radicals to destroy the target cells. In this manner, a high pressure neon arc lamp that is inexpensive and efficiently generates red light useful in photodynamic therapy is provided.

  6. High temperature materials and mechanisms

    CERN Document Server

    2014-01-01

    The use of high-temperature materials in current and future applications, including silicone materials for handling hot foods and metal alloys for developing high-speed aircraft and spacecraft systems, has generated a growing interest in high-temperature technologies. High Temperature Materials and Mechanisms explores a broad range of issues related to high-temperature materials and mechanisms that operate in harsh conditions. While some applications involve the use of materials at high temperatures, others require materials processed at high temperatures for use at room temperature. High-temperature materials must also be resistant to related causes of damage, such as oxidation and corrosion, which are accelerated with increased temperatures. This book examines high-temperature materials and mechanisms from many angles. It covers the topics of processes, materials characterization methods, and the nondestructive evaluation and health monitoring of high-temperature materials and structures. It describes the ...

  7. Analysis of the high-temperature particulate collection problem

    Energy Technology Data Exchange (ETDEWEB)

    Razgaitis, R.

    1977-10-01

    Particulate agglomeration and separation at high temperatures and pressures are examined, with particular emphasis on the unique features of the direct-cycle application of fluidized-bed combustion. The basic long-range mechanisms of aerosol separation are examined, and the effects of high temperature and high pressure on usable collection techniques are assessed. Primary emphasis is placed on those avenues that are not currently attracting widespread research. The high-temperature, particulate-collection problem is surveyed, together with the peculiar requirements associated with operation of turbines with particulate-bearing gas streams. 238 references.

  8. High pressure effects in anaesthesia and narcosis.

    Science.gov (United States)

    Wlodarczyk, Agnieszka; McMillan, Paul F; Greenfield, Susan A

    2006-10-01

    There is growing interest in determining the effects of high pressure on biological functions. Studies of brain processes under hyperbaric conditions can give a unique insight into phenomena such as nitrogen narcosis, inert gas anaesthesia, and pressure reversal of the effects of anaesthetic and narcotic agents. Such research may shed light on the action of anaesthetics, which remains poorly understood, and on the nature of consciousness itself. Various studies have established the behavioural response of organisms to hyperbaric conditions, in the presence or absence of anaesthetic agents. At the molecular level, X-ray crystallography has been used to investigate the incorporation of species like Xe in hydrophobic pockets within model ion channels that may account for pressure effects on neuronal transmission. New magnetic resonance imaging techniques are providing tomographic three-dimensional images that detail brain structure and function, and that can be correlated with behavioural studies and psychological test results. Such whole organ techniques are linked to the molecular scale via voltage-sensitive dye (VSD) imaging studies on brain slices that provide time-resolved images of the dynamic formation and interconnection of inter-neuronal complexes. The VSD experiments are readily adapted to in situ studies under high pressure conditions. In this tutorial review we review the current state of knowledge of hyperbaric effects on brain processes: anaesthesia and narcosis, recent studies at the molecular level via protein crystallography at high pressure in a Xe atmosphere, and we also present some preliminary results of VSD imaging of brain slices under hyperbaric conditions.

  9. HIGH TEMPERATURE VACUUM MIXER

    Directory of Open Access Journals (Sweden)

    E. D. Chertov

    2015-01-01

    Full Text Available The work is devoted to the creation of a new type of mixer to produce homogeneous mixtures of dissimilar materials applied to recycling of housing and communal services waste. The article describes the design of a dual-chamber device of the original high-temperature vacuum mixer, there investigated the processes occurring in the chambers of such devices. The results of theoretical and experimental research of the process of mixing recycled polyethylene with a mixture of "grinded food waste – Eco wool” are presented. The problem of the optimum choice of bending the curvilinear blades in the working volume of the seal, which is achieved by setting their profile in the form of involute arc of several circles of different radii, is examined . The dependences, allowing to define the limits of the changes of the main mode parameters the angular velocity of rotation of the working body of the mixer using two ways of setting the profile of the curvilinear blade mixer are obtained. Represented design of the mixer is proposed to use for a wide range of tasks associated with the mixing of the components with a strongly pronounced difference of physic al chemical properties and, in particular, in the production of composites out of housing and communal services waste.

  10. High temperature interface superconductivity

    Energy Technology Data Exchange (ETDEWEB)

    Gozar, A., E-mail: adrian.gozar@yale.edu [Yale University, New Haven, CT 06511 (United States); Bozovic, I. [Yale University, New Haven, CT 06511 (United States); Brookhaven National Laboratory, Upton, NY 11973 (United States)

    2016-02-15

    Highlight: • This review article covers the topic of high temperature interface superconductivity. • New materials and techniques used for achieving interface superconductivity are discussed. • We emphasize the role played by the differences in structure and electronic properties at the interface with respect to the bulk of the constituents. - Abstract: High-T{sub c} superconductivity at interfaces has a history of more than a couple of decades. In this review we focus our attention on copper-oxide based heterostructures and multi-layers. We first discuss the technique, atomic layer-by-layer molecular beam epitaxy (ALL-MBE) engineering, that enabled High-T{sub c} Interface Superconductivity (HT-IS), and the challenges associated with the realization of high quality interfaces. Then we turn our attention to the experiments which shed light on the structure and properties of interfacial layers, allowing comparison to those of single-phase films and bulk crystals. Both ‘passive’ hetero-structures as well as surface-induced effects by external gating are discussed. We conclude by comparing HT-IS in cuprates and in other classes of materials, especially Fe-based superconductors, and by examining the grand challenges currently laying ahead for the field.

  11. Implications of total content of silicon, aluminium, chromium and formation of thin ferrite films on low ductility at high temperature in non oriented electrical steels

    Directory of Open Access Journals (Sweden)

    Equihua-Guillén, F.

    2011-10-01

    Full Text Available This work shows evidence of the implications of total additions of silicon, aluminium and chromium on low ductility during hot rolling in non-oriented electrical steels. This paper explains the reason of ductility loss at temperatures between 950 - 1000°C in electrical steels which exhibit higher Ar3 transformation temperature than C-Mn and microalloyed steels. The empirical equations to determine Ar3 temperature do not consider silicon and aluminium elements. The results show that high content of silicon, aluminium and residual concentration of chromiun considerably increases Ar3 transformation temperature in non-oriented electrical steels. The low ductility at high temperature occurs between Ae3 and Ar3 transformation temperatures. In addition, the results of this work show evidence of thin ferrite films formed near Ar3 temperature and their implications on ductility loss at high temperature.

    Este trabajo muestra evidencia de las implicaciones de la cantidad total de silicio, aluminio y cromo sobre la baja ductilidad en aceros eléctricos durante la laminación en caliente. Este artículo explica la razón de la pérdida de ductilidad a temperaturas entre 950 y 1.000°C en aceros eléctricos. Las ecuaciones empíricas para determinar la temperatura Ar3 no consideran los elementos aluminio y silicio. Los resultados muestran que altos contenidos de silicio, aluminio y la concentración residual de cromo incrementan considerablemente la temperatura de transformación Ar3 en aceros eléctricos de grano no orientado. La baja ductilidad a elevada temperatura ocurre entre las temperaturas de transformación Ae3 y Ar3. Adicionalmente, los resultados de este trabajo muestran evidencia de películas delgadas de ferrita formadas a temperaturas cercanas a Ar3 y sus implicaciones sobre la pérdida de

  12. High pressure rinsing system comparison

    Energy Technology Data Exchange (ETDEWEB)

    D. Sertore; M. Fusetti; P. Michelato; Carlo Pagani; Toshiyasu Higo; Jin-Seok Hong; K. Saito; G. Ciovati; T. Rothgeb

    2007-06-01

    High pressure rinsing (HPR) is a key process for the surface preparation of high field superconducting cavities. A portable apparatus for the water jet characterization, based on the transferred momentum between the water jet and a load cell, has been used in different laboratories. This apparatus allows to collected quantitative parameters that characterize the HPR water jet. In this paper, we present a quantitative comparison of the different water jet produced by various nozzles routinely used in different laboratories for the HPR process

  13. High pressure rinsing parameters measurements

    Energy Technology Data Exchange (ETDEWEB)

    Cavaliere, E. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy); Fusetti, M. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy); Michelato, P. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy); Pagani, C. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy)]. E-mail: carlo.pagani@mi.infn.it; Pierini, P. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy); Paulon, R. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy); Sertore, D. [INFN Milano - LASA, Via F.lli Cervi 201, I-20090 Segrate (MI) (Italy)

    2006-07-15

    High pressure rinsing with ultra pure water jet is an essential step in the high field superconducting cavity production process. In this paper, we illustrate the experimental characterization of a HPR system, in terms of specific power and energy deposition on the cavity surfaces and on the damage threshold for niobium. These measurements are used to tentatively derive general rules for the optimization of the free process parameters (nozzle geometry, speeds and water pressure)

  14. Synthesis of an orthorhombic high pressure boron phase

    Science.gov (United States)

    Zarechnaya, Evgeniya Yu; Dubrovinsky, Leonid; Dubrovinskaia, Natalia; Miyajima, Nobuyoshi; Filinchuk, Yaroslav; Chernyshov, Dmitry; Dmitriev, Vladimir

    2008-12-01

    The densest boron phase (2.52 g cm-3) was produced as a result of the synthesis under pressures above 9 GPa and temperatures up to ~1800 °C. The x-ray powder diffraction pattern and the Raman spectra of the new material do not correspond to those of any known boron phases. A new high-pressure high-temperature boron phase was defined to have an orthorhombic symmetry (Pnnm (No. 58)) and 28 atoms per unit cell.

  15. Intermolecular Interactions at high pressure

    DEFF Research Database (Denmark)

    Eikeland, Espen Zink

    2016-01-01

    In this project high-pressure single crystal X-ray diffraction has been combined with quantitative energy calculations to probe the energy landscape of three hydroquinone clathrates enclosing different guest molecules. The simplicity of the hydroquinone clathrate structures together with their st......In this project high-pressure single crystal X-ray diffraction has been combined with quantitative energy calculations to probe the energy landscape of three hydroquinone clathrates enclosing different guest molecules. The simplicity of the hydroquinone clathrate structures together...... with their structural chemistry, controlled largely by subtle interactions between the host and the enclosed guest molecules, makes them attractive to study as model systems. Quantifying the numerous superimposed interactions in these clathrates will advance our understanding of more complex supramolecular aggregates....... High-pressure crystallography is the perfect method for studying intermolecular interactions, by forcing the molecules closer together. In all three studied hydroquinone clathrates, new pressure induced phase transitions have been discovered using a mixture of pentane and isopentane as the pressure...

  16. High-Pressure Design of Advanced BN-Based Materials

    Directory of Open Access Journals (Sweden)

    Oleksandr O. Kurakevych

    2016-10-01

    Full Text Available The aim of the present review is to highlight the state of the art in high-pressure design of new advanced materials based on boron nitride. Recent experimental achievements on the governing phase transformation, nanostructuring and chemical synthesis in the systems containing boron nitride at high pressures and high temperatures are presented. All these developments allowed discovering new materials, e.g., ultrahard nanocrystalline cubic boron nitride (nano-cBN with hardness comparable to diamond, and superhard boron subnitride B13N2. Thermodynamic and kinetic aspects of high-pressure synthesis are described based on the data obtained by in situ and ex situ methods. Mechanical and thermal properties (hardness, thermoelastic equations of state, etc. are discussed. New synthetic perspectives, combining both soft chemistry and extreme pressure–temperature conditions are considered.

  17. High-Pressure Design of Advanced BN-Based Materials.

    Science.gov (United States)

    Kurakevych, Oleksandr O; Solozhenko, Vladimir L

    2016-10-20

    The aim of the present review is to highlight the state of the art in high-pressure design of new advanced materials based on boron nitride. Recent experimental achievements on the governing phase transformation, nanostructuring and chemical synthesis in the systems containing boron nitride at high pressures and high temperatures are presented. All these developments allowed discovering new materials, e.g., ultrahard nanocrystalline cubic boron nitride (nano-cBN) with hardness comparable to diamond, and superhard boron subnitride B13N₂. Thermodynamic and kinetic aspects of high-pressure synthesis are described based on the data obtained by in situ and ex situ methods. Mechanical and thermal properties (hardness, thermoelastic equations of state, etc.) are discussed. New synthetic perspectives, combining both soft chemistry and extreme pressure-temperature conditions are considered.

  18. High-temperature beryllium embrittlement

    Energy Technology Data Exchange (ETDEWEB)

    Pokrovsky, A.S. [Scientific Research Inst. of Atomic Reactors, Dimitrovgrad (Russian Federation); Fabritsiev, S.A. [D.V. Efremov Scientific Research Institute, 189631 St. Petersburg (Russian Federation); Bagautdinov, R.M. [Scientific Research Inst. of Atomic Reactors, Dimitrovgrad (Russian Federation); Goncharenko, Yu.D. [Scientific Research Inst. of Atomic Reactors, Dimitrovgrad (Russian Federation)

    1996-10-01

    The neutron irradiation effect on the mechanical properties, swelling and fracture surface structure of various beryllium grades was studied in the BOR-60 reactor at 340 to 350 C up to a fluence of 7.2 x 10{sup 21} n/cm{sup 2}. At a mechanical testing temperature of 400 C there was observed a strong anisotropy of plastic beryllium deformation depending on the direction of sample cutting relative to the pressing direction. An increase of the testing temperature up to 700 C resulted in an abrupt embrittlement of all irradiated samples. In the most part of the surface structure the intercrystallite fracture along the grain boundaries was covered entirely with large pores, 1 to 4 {mu}m in size. It was suggested that the increased rate of pore formation along the grain boundaries resulted from a high-temperature embrittlement under irradiation. (orig.).

  19. Effect of the Ammonia Flow on the Formation of Microstructure Defects in GaN Layers Grown by High-Temperature Vapor Phase Epitaxy

    Science.gov (United States)

    Barchuk, M.; Lukin, G.; Zimmermann, F.; Röder, C.; Motylenko, M.; Pätzold, O.; Heitmann, J.; Kortus, J.; Rafaja, D.

    2016-12-01

    High-temperature vapor phase epitaxy (HTVPE) is a physical vapor transport technology for a deposition of gallium nitride (GaN) layers. However, little is known about the influence of the deposition parameters on the microstructure of the layers. In order to fill this gap, the influence of the ammonia (NH3) flow applied during the HTVPE growth on the microstructure of the deposited GaN layers is investigated in this work. Although the HTVPE technology is intended to grow GaN layers on foreign substrates, the GaN layers under study were grown on GaN templates produced by metal organic vapor phase epitaxy in order to be able to separate the growth defects from the defects induced by the lattice misfit between the foreign substrate and the GaN layer. The microstructure of the layers is characterized by means of high-resolution x-ray diffraction (XRD), transmission electron microscopy and photoluminescence. In samples deposited at low ammonia flow, planar defects were detected, along which the nitrogen atoms are found to be substituted by impurity atoms. The interplay between these planar defects and the threading dislocations is discussed. A combination of XRD and micro-Raman spectroscopy reveals the presence of compressive residual stress in the samples.

  20. Risk Associated With The Decompression Of High Pressure High Temperature Fluids - Study On Black Oil

    DEFF Research Database (Denmark)

    Figueroa, D. C.; Fosbøl, P. L.; Thomsen, K.

    2015-01-01

    Fluids produced from deep underground reservoirs may result in exponential increase in temperature. It is a consequence of adiabatic fluid decompression from the inverse Joule Thomson Effect (JTE). The phenomenon requires analysis in order to avoid any operational risks. This study evaluates...

  1. Practical development of continuous supercritical fluid process using high pressure and high temperature micromixer

    Science.gov (United States)

    Kawasaki, Shin-Ichiro; Sue, Kiwamu; Ookawara, Ryuto; Wakashima, Yuichiro; Suzuki, Akira

    2015-12-01

    In the synthesis of metal oxide fine particles by continuous supercritical hydrothermal method, the particle characteristics are greatly affected by not only the reaction conditions (temperature, pressure, residence time, concentration, etc.), but also the heating rate from ambient to reaction temperature. Therefore, the heating method by direct mixing of starting solution at room temperature with supercritical water is a key technology for the particle production having smaller size and narrow distribution. In this paper, mixing engineering study through comparison between conventional T-shaped mixers and recently developed swirl mixers was carried out in the hydrothermal synthesis of NiO nanoparticles from Ni(NO3)2 aqueous solution at 400 °C and 30 MPa. Inner diameter in the mixers and total flow rates were varied. Furthermore, the heating rate was calculated by computational fluid dynamics (CFD) simulation. Relationship between the heating rate and the average particle size were discussed. It was clarified that the miniaturization of mixer inner diameter and the use of the swirl flow were effective for improving mixing performance and contributed to produce small and narrow distribution particle under same experimental condition of flow rate, temperature, pressure, residence time, and concentration of the starting materials. We have focused the mixer optimization due to a difference in fluid viscosity.

  2. High-pressure high-temperature equation of state of graphite from Monte Carlo simulations

    NARCIS (Netherlands)

    Colonna, F.; Fasolino, A.; Meijer, E.J.

    2011-01-01

    The thermoelastic behavior of graphite is experimentally accessible in a limited range of pressures and temperatures. Here we perform Monte Carlo simulations based on the accurate long range carbon bond-order potential (LCBOPII) in order to study graphite in a wider range of thermodynamic

  3. High-pressure and high-temperature synthesis of MgB2 and its superconductivity

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The single-phase sample of MgB2 was prepared successfully at the temperature of 900℃ and under the pressure of 3 GPa. The structure of the sample was investigated using powder X-ray diffraction and Rietveld analysis.The results show that the structure of the sample belongs to the hexagonal structure with space group of P6/mmm,a=3.0861(5) A, c=3.5222(8) A. The magnetic and resistance measurements indicate that the superconducting transition temperature Tc is 39 K.

  4. MAX200x: In-situ X-ray Measurements at High Pressure and High Temperatures.

    Science.gov (United States)

    Lathe, C.; Mueller, H. J.; Wehber, M.; Lauterjung, J.; Schilling, F. R.

    2009-05-01

    Twenty years ago geoscientists from all over the world launched in-situ X-ray diffraction experiments under extreme pressure and temperature conditions at synchrotron beamlines. One of the first apparatus was installed at HASYLAB, MAX80, a single-stage multi-anvil system. MAX80 allows in-situ diffraction studies in conjunction with the simultaneous measurement of elastic properties up to 12 GPa and 1600 K. This very successful experiment, unique in Europe, is operated by Helmholtz Centre Potsdam and is used by more than twenty groups from different countries every year. Experiments for both, applied and basic research are conducted, ranging from life-sciences, chemistry, physics, over material sciences to geosciences. Today new materials and the use of high brilliant synchrotron sources allow constructing double-stage multi-anvil systems for X-ray diffraction to reach much higher pressures. The newly designed high-flux hard wiggler (HARWI-II) beamline is an ideal X-ray source for this kind of experiments. As only the uppermost few kilometres of the Earth (less than 0.1% of its radius) are accessible for direct observations (e.g. deep drilling), sophisticated techniques are required to observe and to understand the processes in the deep interior of our planet. In-situ studies are an excellent tool to investigate ongoing geodynamic processes within the laboratory. One of the fundamental regions to study geodynamic processes seems to be the so-called transition zone, the boundary between upper and lower Earth's mantle between 410 and 670 km depth. Mineral reactions, phase transitions, as wheel as fluid rock interaction in this area might have the potential to strongly influence and control the dynamic motions within our whole planet. Around 25 GPa and 2 000 K are required to simulate these processes in the laboratory. The new MAX200x will be an excellent tool for these ambitious experiments.

  5. Development and Application of Insulated Drill Pipe for High Temperature, High Pressure Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Tom Champness; Tony Worthen; John Finger

    2008-12-31

    This project aimed to extend the insulated drill pipe (IDP) technology already demonstrated for geothermal drilling to HTHP drilling in deep gas reservoirs where temperatures are high enough to pose a threat to downhole equipment such as motors and electronics. The major components of the project were: a preliminary design; a market survey to assess industry needs and performance criteria; mechanical testing to verify strength and durability of IDP; and development of an inspection plan that would quantify the ability of various inspection techniques to detect flaws in assembled IDP. This report is a detailed description of those activities.

  6. Distributions of the high temperature and the high pressure inside a single acoustically driven bubble

    Institute of Scientific and Technical Information of China (English)

    应崇福; 安宇

    2002-01-01

    The physical circumstances inside an acoustically driven single gas bubble in water has been intensively explored during the past few years. Starting from the results obtained for a typical case in a well known early paper (Wu, C. C., Roberts, P. H., Phys. Rev. Lett., 1993, 70(22): 3424) and introducing successively several corrections to the physical model, this paper computes in corresponding order the temporal and spatial distributions of significant physical parameters, including the temperature and the pressure, in the bubble around the moment of the bubble's violent collapse, until expectations in consistence with the present points of view are procured. For the peak temperature our results agree with the prevailing belief that in a typical stable single bubble it is of the order of ten thousand degrees.

  7. Experimental Study on the Electrical Conductivity of Pyroxene Andesite at High Temperature and High Pressure

    Science.gov (United States)

    Hui, KeShi; Dai, LiDong; Li, HePing; Hu, HaiYing; Jiang, JianJun; Sun, WenQing; Zhang, Hui

    2016-09-01

    The electrical conductivity of pyroxene andesite was in situ measured under conditions of 1.0-2.0 GPa and 673-1073 K using a YJ-3000t multi-anvil press and Solartron-1260 Impedance/Gain-phase analyzer. Experimental results indicate that the electrical conductivities of pyroxene andesite increase with increasing temperature, and the electrical conductivities decrease with the rise of pressure, and the relationship between electrical conductivity (σ) and temperature (T) conforms to an Arrhenius relation within a given pressure and temperature range. When temperature rises up to 873-923 K, the electrical conductivities of pyroxene andesite abruptly increase, and the activation enthalpy increases at this range, which demonstrates that pyroxene andesite starts to dehydrate. By the virtue of the activation enthalpy (0.35-0.42 eV) and the activation volume (-6.75 ± 1.67 cm3/mole) which characterizes the electrical properties of sample after dehydration, we consider that the conduction mechanism is the small polaron conduction before and after dehydration, and that the rise of carrier concentration is the most important reason of increased electrical conductivity.

  8. A simple microfluidic Coriolis effect flowmeter for operation at high pressure and high temperature

    Science.gov (United States)

    Harrison, Christopher; Jundt, Jacques

    2016-08-01

    We describe a microfluidic Coriolis effect flowmeter that is simple to assemble, operates at elevated temperature and pressure, and can be operated with a lock-in amplifier. The sensor has a flow rate sensitivity greater than 2° of phase shift per 1 g/min of mass flow and is benchmarked with flow rates ranging from 0.05 to 2.0 g/min. The internal volume is 15 μl and uses off-the-shelf optical components to measure the tube motion. We demonstrate that fluid density can be calculated from the frequency of the resonating element with proper calibration.

  9. High Temperature, high pressure equation of state density correlations and viscosity correlations

    Energy Technology Data Exchange (ETDEWEB)

    Tapriyal, D.; Enick, R.; McHugh, M.; Gamwo, I.; Morreale, B.

    2012-07-31

    Global increase in oil demand and depleting reserves has derived a need to find new oil resources. To find these untapped reservoirs, oil companies are exploring various remote and harsh locations such as deep waters in Gulf of Mexico, remote arctic regions, unexplored deep deserts, etc. Further, the depth of new oil/gas wells being drilled has increased considerably to tap these new resources. With the increase in the well depth, the bottomhole temperature and pressure are also increasing to extreme values (i.e. up to 500 F and 35,000 psi). The density and viscosity of natural gas and crude oil at reservoir conditions are critical fundamental properties required for accurate assessment of the amount of recoverable petroleum within a reservoir and the modeling of the flow of these fluids within the porous media. These properties are also used to design appropriate drilling and production equipment such as blow out preventers, risers, etc. With the present state of art, there is no accurate database for these fluid properties at extreme conditions. As we have begun to expand this experimental database it has become apparent that there are neither equations of state for density or transport models for viscosity that can be used to predict these fundamental properties of multi-component hydrocarbon mixtures over a wide range of temperature and pressure. Presently, oil companies are using correlations based on lower temperature and pressure databases that exhibit an unsatisfactory predictive capability at extreme conditions (e.g. as great as {+-} 50%). From the perspective of these oil companies that are committed to safely producing these resources, accurately predicting flow rates, and assuring the integrity of the flow, the absence of an extensive experimental database at extreme conditions and models capable of predicting these properties over an extremely wide range of temperature and pressure (including extreme conditions) makes their task even more daunting.

  10. INTERNAL STRESS MECHANISM OF CARBON TRANSMISSION UNDER HIGH TEMPERATURE AND HIGH PRESSURE

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    1ORIGINOFPROBLEMUnderhightemperatureandhighpressure,thenucleationandgrowthofdiamondareachievedwiththeefectofthemetalsortheira...

  11. Measurements of Hydrogen Thermal Conductivity at High Pressure and High Temperature

    Science.gov (United States)

    Moroe, S.; Woodfield, P. L.; Kimura, K.; Kohno, M.; Fukai, J.; Fujii, M.; Shinzato, K.; Takata, Y.

    2011-09-01

    The thermal conductivity for normal hydrogen gas was measured in the range of temperatures from 323 K to 773 K at pressures up to 99 MPa using the transient short hot-wire method. The single-wire platinum probes had wire lengths of 10 mm to 15 mm with a nominal diameter of 10 μm. The volume-averaged transient temperature rise of the wire was calculated using a two-dimensional numerical solution to the unsteady heat conduction equation. A non-linear least-squares fitting procedure was employed to obtain the values of the thermal conductivity required for agreement between the measured temperature rise and the calculation. The experimental uncertainty in the thermal-conductivity measurements was estimated to be 2.2 % ( k = 2). An existing thermal-conductivity equation of state was modified to include the expanded range of conditions covered in the present study. The new correlation is applicable from 78 K to 773 K with pressures to 100 MPa and is in agreement with the majority of the present thermal-conductivity measurements within ±2 %.

  12. High-pressure and high temperature deformation studies of polycrystalline diamond

    Science.gov (United States)

    Yu, Xiaohui

    2011-03-01

    With Vicker's hardness 120 GPa, shear modulus 535 GPa, diamond is the hardest material known to mankind. However, because diamond is difficult to deform, little is known with regard to its constitutive properties such as yield strength. In this work, we present results obtained at NSLS using deformation-DIA on polycrystalline diamond at different P-T conditions. As expected, even at total strains up to 20%, we did not observe the yield point of diamond at room temperature and a confining pressure of 4 GPa. However, for deformation at 1000 and 1200& circ; C, we observed an plastic flow of diamond at total strains of 10% and 5%, respectively, indicating that diamond weakens rapidly when temperature is over 1000& circ; C. We further derived the micro stress of diamond from peak width analysis, and found that the micro and macro stresses show similar variations with total strain at both room temperature and 1000& circ; C. However, at 1200& circ; C, the micro stress remains constant in entire deformation, indicating that stress is uniformly distributed within diamond particles at 1200& circ; C. We also carried out SEM studies on the recovered samples to investigate the miscrostructures, and find that the grain size of diamond decreases substantially during the deformation, from the initial microns to sub-microns for the room temperature deformation, however, almost doesn't change for the 1200& circ; C.

  13. High-temperature and high-pressure phase transitions in uranium

    Science.gov (United States)

    Bouchet, J.; Bottin, F.

    2017-02-01

    The phase diagram of uranium has been explored up to 100 GPa and 2000 K by means of ab initio molecular dynamics (AIMD) simulations. The lattice dynamics and energetics of the stable phases observed experimentally in this range of pressure and temperature are studied in this work. The phonon spectra of the α and γ phases are shown to evolve strongly as a function of temperature, unveiling the huge anharmonic effects present in this material. If the elastics constants and the bulk and shear moduli of the γ phase do not disclose any temperature effects, the shear modulus of the α phase decreases strongly as a function of temperature. Using the pressure- and temperature-dependent vibrational density of states and the Gibbs free energy of these two structures, we found a line transition between the α and γ phases which slightly underestimates the experimental one. Coherently with experiments, the bct structure is never found stable between 0 and 100 GPa.

  14. High-pressure high-temperature synthesis and structure of α-tetragonal boron

    Directory of Open Access Journals (Sweden)

    Evgeny A Ekimov and Igor P Zibrov

    2011-01-01

    Full Text Available ERRATUMThis is an Erratum for the article 2011 Sci. Technol. Adv. Mater. 12 055009The publisher regrets that there is a typographical error on page 2 of this article. The fourth sentence of section 3 should read as follows:The lines characteristic of B–H–B (1700–2000 cm-1 and B–H (2550–2650 cm-1 bonds of decaborane were not found in the Raman spectra of the crystals (figure 3 that confirms the complete decomposition of decaborane [19, 20].

  15. Advances in high temperature chemistry

    CERN Document Server

    Eyring, Leroy

    1969-01-01

    Advances in High Temperature Chemistry, Volume 2 covers the advances in the knowledge of the high temperature behavior of materials and the complex and unfamiliar characteristics of matter at high temperature. The book discusses the dissociation energies and free energy functions of gaseous monoxides; the matrix-isolation technique applied to high temperature molecules; and the main features, the techniques for the production, detection, and diagnosis, and the applications of molecular beams in high temperatures. The text also describes the chemical research in streaming thermal plasmas, as w

  16. Fabrics and deformational mechanisms in the high-pressure granulite of the Bacariza Formation (Cabo Ortegal Complex, NW Spain); Fabricas y mecanismos deformacionales en las granulitas de alta presion de la Formacion Bacariza (Complejo de Cabo Ortegal, NO de Espana)

    Energy Technology Data Exchange (ETDEWEB)

    Puelles, P.

    2009-07-01

    In the Cabo Ortegal Complex, mylonitic high-pressure granulites occur at the contacts between the HP granulitic Bacariza Formation and the adjacent units. This mylonitic stage is associated with the initial exhumation of the complex. The petrographic, microstructural and crystallographic analysis of the main constituent minerals in these rocks might provide valuable information on the deformation mechanisms operative at depth. Garnet accommodated part of the deformation by dislocation creep and rigid rotation, augite underwent dislocation creep accompanied by mass transfer and anisotropic growth while plagioclase, in turn, suffered dynamic subgrain rotation-recrystallization and climb-accommodated dislocation creep. Quartz fabrics developed under at least amphibolite-facies conditions. The shear sense criteria are consistent with a top-to-the-NE displacement of the hanging wall blocks. During their ascent to the surface, a static amphibolite-facies retrogressive stage was followed by plastic deformation accommodation under green schist- to lower amphibolite facies conditions. Deformation during the latest stages of exhumation was characterized by micro fracturing and seismic activity in conditions of high differential stresses and strain rates. (Author) 52 refs.

  17. Rapid formation of Ni3Sn4 joints for die attachment of SiC-based high temperature power devices using ultrasound-induced transient liquid phase bonding process.

    Science.gov (United States)

    Li, Z L; Dong, H J; Song, X G; Zhao, H Y; Feng, J C; Liu, J H; Tian, H; Wang, S J

    2017-05-01

    High melting point Ni3Sn4 joints for the die attachment of SiC-based high temperature power devices was successfully achieved using an ultrasound-induced transient liquid phase (TLP) bonding process within a remarkably short bonding time of 8s. The formed intermetallic joints, which are completely composed of the refined equiaxial Ni3Sn4 grains with the average diameter of 2μm, perform the average shear strength of 26.7MPa. The sonochemical effects of ultrasonic waves dominate the mechanism and kinetics of the rapid formation of Ni3Sn4 joints.

  18. Stability and breakdown of Ca{sup 13}CO{sub 3} melt associated with formation of {sup 13}C-diamond in static high pressure experiments up to 43 GPa and 3900 K

    Energy Technology Data Exchange (ETDEWEB)

    Spivak, A.V., E-mail: spivak@iem.ac.ru [Institute of Experimental Mineralogy of the Russian Academy of Sciences, Chernogolovka, Moscow Region (Russian Federation); Litvin, Yu.A. [Institute of Experimental Mineralogy of the Russian Academy of Sciences, Chernogolovka, Moscow Region (Russian Federation); Ovsyannikov, S.V. [Bayerishes Geoinstitut, University of Bayreuth, Bayreuth (Germany); Dubrovinskaia, N.A. [Material Physics and Technology at Extreme Conditions, Laboratory of Crystallography, University of Bayreuth, Bayreuth (Germany); Dubrovinsky, L.S. [Bayerishes Geoinstitut, University of Bayreuth, Bayreuth (Germany)

    2012-07-15

    Melting of calcium carbonate Ca{sup 13}CO{sub 3}, stability of the melt and its decomposition were studied in static high pressure experiments at pressures of 11-43 GPa and temperatures of 1600-3900 K using diamond anvil cell technique with laser heating. We observed formation of {sup 13}C-graphite (below 16 GPa) and {sup 13}C-diamond (between 16 and 43 GPa) on decomposition of the Ca{sup 13}CO{sub 3} melt at temperatures above 3400 K. At temperatures below 3400 K congruent melting of calcium carbonate was confirmed. The experimental results were applied to construction of the phase diagram of CaCO{sub 3} up to 43 GPa and 3900 K focusing at the melting curve of calcium carbonate and the decomposition phase boundary of CaCO{sub 3} melt. - Graphical abstract: Highlights: Black-Right-Pointing-Pointer Phase states of CaCO{sub 3} were studied at P=11-43 GPa and T=1600-3900 K. Black-Right-Pointing-Pointer {sup 13}C-diamond easily crystallizes in carbonate-carbon (Ca{sup 13}CO{sub 3-}{sup 13}C-graphite) melt-solutions. Black-Right-Pointing-Pointer Ca-carbonate melts congruently that was observed in experiments in DAC with laser heating. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} melt, indicated by formation of graphite and/or diamond. Black-Right-Pointing-Pointer Decomposition of CaCO{sub 3} was observed at temperatures above 3400 K in the pressure interval studied.

  19. HIGH PRESSURE COAL COMBUSTON KINETICS PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Stefano Orsino

    2005-03-30

    As part of the U.S. Department of Energy (DoE) initiative to improve the efficiency of coal-fired power plants and reduce the pollution generated by these facilities, DOE has funded the High-Pressure Coal Combustion Kinetics (HPCCK) Projects. A series of laboratory experiments were conducted on selected pulverized coals at elevated pressures with the specific goals to provide new data for pressurized coal combustion that will help extend to high pressure and validate models for burnout, pollutant formation, and generate samples of solid combustion products for analyses to fill crucial gaps in knowledge of char morphology and fly ash formation. Two series of high-pressure coal combustion experiments were performed using SRI's pressurized radiant coal flow reactor. The first series of tests characterized the near burner flame zone (NBFZ). Three coals were tested, two high volatile bituminous (Pittsburgh No.8 and Illinois No.6), and one sub-bituminous (Powder River Basin), at pressures of 1, 2, and 3 MPa (10, 20, and 30 atm). The second series of experiments, which covered high-pressure burnout (HPBO) conditions, utilized a range of substantially longer combustion residence times to produce char burnout levels from 50% to 100%. The same three coals were tested at 1, 2, and 3 MPa, as well as at 0.2 MPa. Tests were also conducted on Pittsburgh No.8 coal in CO2 entrainment gas at 0.2, 1, and 2 MPa to begin establishing a database of experiments relevant to carbon sequestration techniques. The HPBO test series included use of an impactor-type particle sampler to measure the particle size distribution of fly ash produced under complete burnout conditions. The collected data have been interpreted with the help of CFD and detailed kinetics simulation to extend and validate devolatilization, char combustion and pollutant model at elevated pressure. A global NOX production sub-model has been proposed. The submodel reproduces the performance of the detailed chemical

  20. High-Temperature Piezoelectric Sensing

    Directory of Open Access Journals (Sweden)

    Xiaoning Jiang

    2013-12-01

    Full Text Available Piezoelectric sensing is of increasing interest for high-temperature applications in aerospace, automotive, power plants and material processing due to its low cost, compact sensor size and simple signal conditioning, in comparison with other high-temperature sensing techniques. This paper presented an overview of high-temperature piezoelectric sensing techniques. Firstly, different types of high-temperature piezoelectric single crystals, electrode materials, and their pros and cons are discussed. Secondly, recent work on high-temperature piezoelectric sensors including accelerometer, surface acoustic wave sensor, ultrasound transducer, acoustic emission sensor, gas sensor, and pressure sensor for temperatures up to 1,250 °C were reviewed. Finally, discussions of existing challenges and future work for high-temperature piezoelectric sensing are presented.

  1. High-temperature carbidization of carboniferous rocks

    Science.gov (United States)

    Goldin, B. A.; Grass, V. E.; Nadutkin, A. V.; Nazarova, L. Yu.

    2009-08-01

    Processes of thermal metamorphism of carboniferous rocks have been studied experimentally. The conditions of high-temperature interaction of shungite carbon with components of the contained rocks, leading to formation of carbide compounds, have been determined. The results of this investigation contribute to the works on searching for new raw material for prospective material production.

  2. Steam Oxidation at High Pressure

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, Gordon R. [NETL; Carney, Casey [URS

    2013-07-19

    A first high pressure test was completed: 293 hr at 267 bar and 670{degrees}C; A parallel 1 bar test was done for comparison; Mass gains were higher for all alloys at 267 bar than at 1 bar; Longer term exposures, over a range of temperatures and pressures, are planned to provide information as to the commercial implications of pressure effects; The planned tests are at a higher combination of temperatures and pressures than in the existing literature. A comparison was made with longer-term literature data: The short term exposures are largely consistent with the longer-term corrosion literature; Ferritic steels--no consistent pressure effect; Austenitic steels--fine grain alloys less able to maintain protective chromia scale as pressure increases; Ni-base alloys--more mass gains above 105 bar than below. Not based on many data points.

  3. High temperature suppression of dioxins.

    Science.gov (United States)

    Zhan, Ming-Xiu; Chen, Tong; Fu, Jian-Ying; Lin, Xiao-Qing; Lu, Sheng-Yong; Li, Xiao-Dong; Yan, Jian-Hua; Buekens, Alfons

    2016-03-01

    Combined Sulphur-Nitrogen inhibitors, such as sewage sludge decomposition gases (SDG), thiourea and amidosulphonic acid have been observed to suppress the de novo synthesis of dioxins effectively. In this study, the inhibition of PCDD/Fs formation from model fly ash was investigated at unusually high temperatures (650 °C and 850 °C), well above the usual range of de novo tests (250-400 °C). At 650 °C it was found that SDG evolving from dried sewage sludge could suppress the formation of 2,3,7,8-substituted PCDD/Fs with high efficiency (90%), both in weight units and in I-TEQ units. Additionally, at 850 °C, three kinds of sulphur-amine or sulphur-ammonium compounds were tested to inhibit dioxins formation during laboratory-scale tests, simulating municipal solid waste incineration. The suppression efficiencies of PCDD/Fs formed through homogeneous gas phase reactions were all above 85% when 3 wt. % of thiourea (98.7%), aminosulphonic acid (96.0%) or ammonium thiosulphate (87.3%) was added. Differences in the ratio of PCDFs/PCDDs, in weight average chlorination level and in the congener distribution of the 17 toxic PCDD/Fs indicated that the three inhibitors tested followed distinct suppression pathways, possibly in relation to their different functional groups of nitrogen. Furthermore, thiourea reduced the (weight) average chlorinated level. In addition, the thermal decomposition of TUA was studied by means of thermogravimetry-fourier transform infrared spectroscopy (TG-FTIR) and the presence of SO2, SO3, NH3 and nitriles (N≡C bonds) was shown in the decomposition gases; these gaseous inhibitors might be the primary dioxins suppressants.

  4. Study on the Effect of High Temperature after Anthesis on Starch Formation and Yield in Spring Wheat%花后高温对春小麦籽粒淀粉含量及产量的影响研究

    Institute of Scientific and Technical Information of China (English)

    周续莲; 康建宏; 吴宏亮; 杨金娟; 姚珊

    2012-01-01

    春小麦灌浆期频繁遭受高温危害,严重影响了小麦产量和品质.本研究在盆栽条件下,探讨了花后高温对春小麦淀粉形成和产量的影响.结果表明,灌浆期高温使春小麦籽粒直链淀粉含量上升,支链淀粉含量下降,直/支比增大,总淀粉降低显著,淀粉品质下降.花后高温降低了春小麦籽粒淀粉,导致春小麦产量大幅度下降.因此,采取相应栽培技术缓解花后高温危害,可以在一定程度上提高宁夏春小麦的产量.%Spring wheat frequently subjected to high temperature damage, seriously affecting the yield and quality. In this study, spring wheat were plantd under the conditions of high temperature and studied the change of yield of starch formation. The results showed that daring wheat grain filling stage, amylase content increased and amyl pectin decreased, amylase/amyl pectin ratio increased significantly, total starch content and starch quality degraded. High temperature after flowering reduced starch content and yield. So, took a cultivation techniques to remit hazard of high temperaure after flowers could improve the yield of spring wheat in Ningxia,to a certain extent.

  5. High pressure synthesis of BiS2

    DEFF Research Database (Denmark)

    Søndergaard-Pedersen, Simone; Nielsen, Morten Bormann; Bremholm, Martin

    High pressure synthesis is an important method in the search for new compounds that in many cases can be quenched to ambient conditions. Therefore high pressure syntheses push the boundaries of solid state chemistry. There is a large current interest in the metal dichalcogenides with their unique....... The possibilities of using high pressure synthesis to discover new phases in the Bi-S binary system were investigated as early as the 1960’s.4 The research led to discovery of a compound with BiS2 stoichiometry, but no structure solution of BiS2 was reported. A reason behind making this new phase is to study...... the physical properties since the related compound Bi2S3 is known to be a thermoelectric material.5 In this research the BiS2 compound was synthesized by a high pressure and high temperature method using a multi-anvil large volume press and the structure was solved by single crystal diffraction. The structure...

  6. Stability of Materials in High Temperature Water Vapor: SOFC Applications

    Science.gov (United States)

    Opila, E. J.; Jacobson, N. S.

    2010-01-01

    Solid oxide fuel cell material systems require long term stability in environments containing high-temperature water vapor. Many materials in fuel cell systems react with high-temperature water vapor to form volatile hydroxides which can degrade cell performance. In this paper, experimental methods to characterize these volatility reactions including the transpiration technique, thermogravimetric analysis, and high pressure mass spectrometry are reviewed. Experimentally determined data for chromia, silica, and alumina volatility are presented. In addition, data from the literature for the stability of other materials important in fuel cell systems are reviewed. Finally, methods for predicting material recession due to volatilization reactions are described.

  7. Equation of state of liquid Indium under high pressure

    Directory of Open Access Journals (Sweden)

    Huaming Li

    2015-09-01

    Full Text Available We apply an equation of state of a power law form to liquid Indium to study its thermodynamic properties under high temperature and high pressure. Molar volume of molten indium is calculated along the isothermal line at 710K within good precision as compared with the experimental data in an externally heated diamond anvil cell. Bulk modulus, thermal expansion and internal pressure are obtained for isothermal compression. Other thermodynamic properties are also calculated along the fitted high pressure melting line. While our results suggest that the power law form may be a better choice for the equation of state of liquids, these detailed predictions are yet to be confirmed by further experiment.

  8. Electrical Resistivity and Thermodynamic Properties of Iron Under High Pressure

    Science.gov (United States)

    Hieu, Ho Khac; Hai, Tran Thi; Hong, Nguyen Thi; Sang, Ngo Dinh; Tuyen, Nguyen Viet

    2017-03-01

    In this work, the electrical resistivity and thermodynamic properties of iron under high pressure have been investigated by using the semi-empirical approach. The recently well-established Grüneisen parameter expressions have been applied to derive the Debye frequency and temperature under compression. Using these results combined with the Bloch-Grüneisen law, the resistivity of iron has also been determined up to Earth's core pressures. We show that the electrical resistivity diminished gradually with pressure and saturates at high pressure. Our model gives low electrical resistivity values which are in agreement with the recent experimental measurements. The low resistivity may be attributed to the well-known resistivity saturation effect at high temperature, which was not considered in earlier models of core conductivity.

  9. Scheelite CaWO{sub 4} at high pressures

    Energy Technology Data Exchange (ETDEWEB)

    Grzechnik, Andrzej [Laboratory of Crystallography, University of Bayreuth, D-95440 Bayreuth (Germany); Crichton, Wilson A [European Synchrotron Radiation Facility, BP 220, F-38043 Grenoble cedex (France); Hanfland, Michael [European Synchrotron Radiation Facility, BP 220, F-38043 Grenoble cedex (France); Smaalen, Sander van [Laboratory of Crystallography, University of Bayreuth, D-95440 Bayreuth (Germany)

    2003-11-05

    The high-pressure room-temperature behaviour of scheelite CaWO{sub 4} (I4{sub 1}/a,Z = 4) is studied using high-resolution synchrotron angle-dispersive x-ray powder diffraction in diamond anvil cells loaded with helium or a mixture of methanol and ethanol as the pressure-transmitting media. At about 10 GPa, there occurs a phase transition to the fergusonite type (I 2/a,Z = 4) without any discontinuity in the pressure dependence of the unit cell volumes. These observations are discussed in relation to the high-pressure-high-temperature systematics of the AMX{sub 4} and AX{sub 2} type compounds.

  10. High Temperature Electrostrictive Ceramics Project

    Data.gov (United States)

    National Aeronautics and Space Administration — TRS Technologies proposes to develop high temperature electrostrictors from bismuth-based ferroelectrics. These materials will exhibit high strain and low loss in...

  11. High Temperature Materials Laboratory (HTML)

    Data.gov (United States)

    Federal Laboratory Consortium — The six user centers in the High Temperature Materials Laboratory (HTML), a DOE User Facility, are dedicated to solving materials problems that limit the efficiency...

  12. High temperature superconductor accelerator magnets

    NARCIS (Netherlands)

    van Nugteren, J.

    2016-01-01

    For future particle accelerators bending dipoles are considered with magnetic fields exceeding 20T. This can only be achieved using high temperature superconductors (HTS). These exhibit different properties from classical low temperature superconductors and still require significant research and dev

  13. Ultra-High Temperature Gratings

    Institute of Scientific and Technical Information of China (English)

    John Canning; Somnath Bandyopadhyay; Michael Stevenson; Kevin Cook

    2008-01-01

    Regenerated gratings seeded by type-Ⅰ gratings are shown to withstand temperatures beyond 1000 ℃. The method of regeneration offers a new approach to increasing temperature resistance of stable fibre Bragg and other gratings. These ultra-high temperature (UHT) gratings extend the applicability of silicate based components to high temperature applications such as monitoring of smelters and vehicle and aircraft engines to high power fibre lasers.

  14. Energy efficient engine high-pressure turbine detailed design report

    Science.gov (United States)

    Thulin, R. D.; Howe, D. C.; Singer, I. D.

    1982-01-01

    The energy efficient engine high-pressure turbine is a single stage system based on technology advancements in the areas of aerodynamics, structures and materials to achieve high performance, low operating economics and durability commensurate with commercial service requirements. Low loss performance features combined with a low through-flow velocity approach results in a predicted efficiency of 88.8 for a flight propulsion system. Turbine airfoil durability goals are achieved through the use of advanced high-strength and high-temperature capability single crystal materials and effective cooling management. Overall, this design reflects a considerable extension in turbine technology that is applicable to future, energy efficient gas-turbine engines.

  15. Synthesis of an orthorhombic high pressure boron phase

    Energy Technology Data Exchange (ETDEWEB)

    Yu Zarechnaya, Evgeniya; Dubrovinsky, Leonid; Miyajima, Nobuyoshi [Bayerisches Geoinstitut, Universitaet Bayreuth, 95440 Bayreuth (Germany); Dubrovinskaia, Natalia [Institute of Earth Sciences, Universitaet Heidelberg, Im Neuenheimer Feld 236, 69120 Heidelberg (Germany); Filinchuk, Yaroslav; Chernyshov, Dmitry; Dmitriev, Vladimir [Swiss Norwegian Beam lines at ESRF, 38043 Gernoble (France)], E-mail: Evgeniya.Zarechnaya@uni-bayreuth.de

    2008-12-15

    The densest boron phase (2.52 g cm{sup -3}) was produced as a result of the synthesis under pressures above 9 GPa and temperatures up to {approx}1800 deg. C. The x-ray powder diffraction pattern and the Raman spectra of the new material do not correspond to those of any known boron phases. A new high-pressure high-temperature boron phase was defined to have an orthorhombic symmetry (Pnnm (No. 58)) and 28 atoms per unit cell.

  16. Synthesis of an orthorhombic high pressure boron phase

    Directory of Open Access Journals (Sweden)

    Evgeniya Yu Zarechnaya, Leonid Dubrovinsky, Natalia Dubrovinskaia, Nobuyoshi Miyajima, Yaroslav Filinchuk, Dmitry Chernyshov and Vladimir Dmitriev

    2008-01-01

    Full Text Available The densest boron phase (2.52 g cm-3 was produced as a result of the synthesis under pressures above 9 GPa and temperatures up to ~1800 °C. The x-ray powder diffraction pattern and the Raman spectra of the new material do not correspond to those of any known boron phases. A new high-pressure high-temperature boron phase was defined to have an orthorhombic symmetry (Pnnm (No. 58 and 28 atoms per unit cell.

  17. Superhard Semiconducting Optically Transparent High Pressure Phase of Boron

    Science.gov (United States)

    Zarechnaya, E. Yu.; Dubrovinsky, L.; Dubrovinskaia, N.; Filinchuk, Y.; Chernyshov, D.; Dmitriev, V.; Miyajima, N.; El Goresy, A.; Braun, H. F.; van Smaalen, S.; Kantor, I.; Kantor, A.; Prakapenka, V.; Hanfland, M.; Mikhaylushkin, A. S.; Abrikosov, I. A.; Simak, S. I.

    2009-05-01

    An orthorhombic (space group Pnnm) boron phase was synthesized at pressures above 9 GPa and high temperature, and it was demonstrated to be stable at least up to 30 GPa. The structure, determined by single-crystal x-ray diffraction, consists of B12 icosahedra and B2 dumbbells. The charge density distribution obtained from experimental data and ab initio calculations suggests covalent chemical bonding in this phase. Strong covalent interatomic interactions explain the low compressibility value (bulk modulus is K300=227GPa) and high hardness of high-pressure boron (Vickers hardness HV=58GPa), after diamond the second hardest elemental material.

  18. Characterization of Growth Hillocks on the Surface of High-Pressure Synthetic Diamond

    Institute of Scientific and Technical Information of China (English)

    尹龙卫; 李木森; 袁泉; 许斌; 郝兆印

    2002-01-01

    Diamond crystals, with dimensions of about 0.5-0.6mm, were synthesized in the presence of Fe-Ni and Fe-Ni Si catalyst solvents under high-pressure-high-temperature (HPHT) conditions. The as-known dendritic pattern was clearly seen on the (111) or (100) planes of diamond single crystals grown using Fe-Ni as a catalyst solvent.However, the conventional dendritic pattern was not observed in diamonds grown in the presence of Fe-Ni-Si alloy catalyst. Trigonal-type, pyramid-type, polygonal-type and rectangular-type growth hillocks were clearly observed on the (111) and (100) surfaces of diamonds grown from the Fe-Ni-Si-C system, and the density of the hillocks is very high at some positions. Clear successive growth layers can also be found on the (111) planes of the high-pressure diamond single crystals grown in the presence of Fe-Ni-Si alloy catalyst. The growth hillocks distributed on the (111) and (100) planes of the diamonds generally occur on or near growth steps, and some of the hillocks terminate at certain solid inclusions and voids. Growth hillocks on the (111) and (100) surfaces directly indicate the spiral growth mechanism under HPHT. A possible formation process for growth hillocks is proposed.

  19. High Pressure Materials Research: Novel Extended Phases of Molecular Triatomics

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, C

    2004-05-26

    Application of high pressure significantly alters the interatomic distance and thus the nature of intermolecular interaction, chemical bonding, molecular configuration, crystal structure, and stability of solid [1]. With modern advances in high-pressure technologies [2], it is feasible to achieve a large (often up to a several-fold) compression of lattice, at which condition material can be easily forced into a new physical and chemical configuration [3]. The high-pressure thus offers enhanced opportunities to discover new phases, both stable and metastable ones, and to tune exotic properties in a wide-range of atomistic length scale, substantially greater than (often being several orders of) those achieved by other thermal (varying temperatures) and chemical (varying composition or making alloys) means. Simple molecular solids like H{sub 2}, C, CO{sub 2}, N{sub 2}, O{sub 2}, H{sub 2}O, CO, NH{sub 3}, and CH{sub 4} are bounded by strong covalent intramolecular bonds, yet relatively weak intermolecular bonds of van der Waals and/or hydrogen bonds. The weak intermolecular bonds make these solids highly compressible (i.e., low bulk moduli typically less than 10 GPa), while the strong covalent bonds make them chemically inert at least initially at low pressures. Carbon-carbon single bonds, carbon-oxygen double bonds and nitrogen-nitrogen triple bonds, for example, are among the strongest. These molecular forms are, thus, often considered to remain stable in an extended region of high pressures and high temperatures. High stabilities of these covalent molecules are also the basis of which their mixtures are often presumed to be the major detonation products of energetic materials as well as the major constituents of giant planets. However, their physical/chemical stabilities are not truly understood at those extreme pressure-temperature conditions. In fact, an increasing amount of experimental evidences contradict the assumed stability of these materials at high

  20. High Temperature Fluoride Salt Test Loop

    Energy Technology Data Exchange (ETDEWEB)

    Aaron, Adam M. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Cunningham, Richard Burns [Univ. of Tennessee, Knoxville, TN (United States); Fugate, David L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Holcomb, David Eugene [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Kisner, Roger A. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Peretz, Fred J. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Robb, Kevin R. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Wilson, Dane F. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States); Yoder, Jr, Graydon L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States)

    2015-12-01

    Effective high-temperature thermal energy exchange and delivery at temperatures over 600°C has the potential of significant impact by reducing both the capital and operating cost of energy conversion and transport systems. It is one of the key technologies necessary for efficient hydrogen production and could potentially enhance efficiencies of high-temperature solar systems. Today, there are no standard commercially available high-performance heat transfer fluids above 600°C. High pressures associated with water and gaseous coolants (such as helium) at elevated temperatures impose limiting design conditions for the materials in most energy systems. Liquid salts offer high-temperature capabilities at low vapor pressures, good heat transport properties, and reasonable costs and are therefore leading candidate fluids for next-generation energy production. Liquid-fluoride-salt-cooled, graphite-moderated reactors, referred to as Fluoride Salt Reactors (FHRs), are specifically designed to exploit the excellent heat transfer properties of liquid fluoride salts while maximizing their thermal efficiency and minimizing cost. The FHR s outstanding heat transfer properties, combined with its fully passive safety, make this reactor the most technologically desirable nuclear power reactor class for next-generation energy production. Multiple FHR designs are presently being considered. These range from the Pebble Bed Advanced High Temperature Reactor (PB-AHTR) [1] design originally developed by UC-Berkeley to the Small Advanced High-Temperature Reactor (SmAHTR) and the large scale FHR both being developed at ORNL [2]. The value of high-temperature, molten-salt-cooled reactors is also recognized internationally, and Czechoslovakia, France, India, and China all have salt-cooled reactor development under way. The liquid salt experiment presently being developed uses the PB-AHTR as its focus. One core design of the PB-AHTR features multiple 20 cm diameter, 3.2 m long fuel channels

  1. Gallium phosphide high temperature diodes

    Science.gov (United States)

    Chaffin, R. J.; Dawson, L. R.

    1981-01-01

    High temperature (300 C) diodes for geothermal and other energy applications were developed. A comparison of reverse leakage currents of Si, GaAs, and GaP was made. Diodes made from GaP should be usable to 500 C. A Liquid Phase Epitaxy (LPE) process for producing high quality, grown junction GaP diodes is described. This process uses low vapor pressure Mg as a dopant which allows multiple boat growth in the same LPE run. These LPE wafers were cut into die and metallized to make the diodes. These diodes produce leakage currents below ten to the -9th power A/sq cm at 400 C while exhibiting good high temperature rectification characteristics. High temperature life test data is presented which shows exceptional stability of the V-I characteristics.

  2. Highly efficient high temperature electrolysis

    DEFF Research Database (Denmark)

    Hauch, Anne; Ebbesen, Sune; Jensen, Søren Højgaard;

    2008-01-01

    High temperature electrolysis of water and steam may provide an efficient, cost effective and environmentally friendly production of H-2 Using electricity produced from sustainable, non-fossil energy sources. To achieve cost competitive electrolysis cells that are both high performing i.e. minimum...... internal resistance of the cell, and long-term stable, it is critical to develop electrode materials that are optimal for steam electrolysis. In this article electrolysis cells for electrolysis of water or steam at temperatures above 200 degrees C for production of H-2 are reviewed. High temperature...... electrolysis is favourable from a thermodynamic point of view, because a part of the required energy can be supplied as thermal heat, and the activation barrier is lowered increasing the H-2 production rate. Only two types of cells operating at high temperature (above 200 degrees C) have been described...

  3. Part-load performance of a high temperature Kalina cycle

    DEFF Research Database (Denmark)

    Modi, Anish; Andreasen, Jesper Graa; Kærn, Martin Ryhl

    2015-01-01

    The Kalina cycle has recently seen increased interest as an alternative to the conventional steam Rankine cycle. The cycle has been studied for use with both low and high temperature applications such as geothermal power plants, ocean thermal energy conversion, waste heat recovery, gas turbine...... bottoming cycle, and solar power plants. The high temperature cycle layouts are inherently more complex than the low temperature layouts due to the presence of a distillation-condensation subsystem, three pressure levels, and several heat exchangers. This paper presents a detailed approach to solve...... the Kalina cycle in part-load operating conditions for high temperature (a turbine inlet temperature of 500 °C) and high pressure (100 bar) applications. A central receiver concentrating solar power plant with direct vapour generation is considered as a case study where the part-load conditions are simulated...

  4. High temperature superconductor current leads

    Energy Technology Data Exchange (ETDEWEB)

    Hull, John R. (Hinsdale, IL); Poeppel, Roger B. (Glen Ellyn, IL)

    1995-01-01

    An electrical lead having one end for connection to an apparatus in a cryogenic environment and the other end for connection to an apparatus outside the cryogenic environment. The electrical lead includes a high temperature superconductor wire and an electrically conductive material distributed therein, where the conductive material is present at the one end of the lead at a concentration in the range of from 0 to about 3% by volume, and at the other end of the lead at a concentration of less than about 20% by volume. Various embodiments are shown for groups of high temperature superconductor wires and sheaths.

  5. High temperature polymer matrix composites

    Science.gov (United States)

    Serafini, Tito T. (Editor)

    1987-01-01

    These are the proceedings of the High Temperature Polymer Matrix Composites Conference held at the NASA Lewis Research Center on March 16 to 18, 1983. The purpose of the conference is to provide scientists and engineers working in the field of high temperature polymer matrix composites an opportunity to review, exchange, and assess the latest developments in this rapidly expanding area of materials technology. Technical papers are presented in the following areas: (1) matrix development; (2) adhesive development; (3) Characterization; (4) environmental effects; and (5) applications.

  6. High temperature corrosion in gasifiers

    Directory of Open Access Journals (Sweden)

    Bakker Wate

    2004-01-01

    Full Text Available Several commercial scale coal gasification combined cycle power plants have been built and successfully operated during the last 5-10 years. Supporting research on materials of construction has been carried out for the last 20 years by EPRI and others. Emphasis was on metallic alloys for heat exchangers and other components in contact with hot corrosive gases at high temperatures. In this paper major high temperature corrosion mechanisms, materials performance in presently operating gasifiers and future research needs will be discussed.

  7. NUMERICAL SIMULATION OF CAVITATION FLOW UNDER HIGH PRESSURE AND TEMPERATURE

    Institute of Scientific and Technical Information of China (English)

    ZHAO Wei-guo; ZHANG Ling-xin; SHAO Xue-ming

    2011-01-01

    The numerical simulation of cavitation flow on a 2D NACA0015 hydrofoil under high pressure and temperature is performed. The Singhal's cavitation model is adopted combined with an improved RNG k-ε turbulence model to study the cavitation flow. The thermal effect in the cavitation flow is taken into account by introducing the energy equation with a source term based on the latent heat transfer. The code is validated by a case of a hydrofoil under two different temperatures in a comparison between the simulation and the experiment. Computational results show that the latent heat of vaporization has a significant impact on the cavitation process in the high temperature state, and the cavity in the high temperature state is thinner and shorter than that in a normal state with the same cavitation number, due to the fact that the heat absorption in the cavitation area reduces the local temperature and the saturated vapor pressure. This numerical study provides some guidance for the design of machineries in the High Pressure and Temperature (HPT) state.

  8. High pressure effects on fruits and vegetables

    NARCIS (Netherlands)

    Timmermans, R.A.H.; Matser, A.M.

    2016-01-01

    The chapter provides an overview on different high pressure based treatments (high pressure pasteurization, blanching, pressure-assisted thermal processing, pressure-shift freezing and thawing) available for the preservation of fruits and vegetable products and extending their shelf life. Pressure t

  9. High pressure effects on fruits and vegetables

    NARCIS (Netherlands)

    Timmermans, R.A.H.; Matser, A.M.

    2016-01-01

    The chapter provides an overview on different high pressure based treatments (high pressure pasteurization, blanching, pressure-assisted thermal processing, pressure-shift freezing and thawing) available for the preservation of fruits and vegetable products and extending their shelf life. Pressure

  10. Experimental methods for phase equilibria at high pressures.

    Science.gov (United States)

    Dohrn, Ralf; Fonseca, José M S; Peper, Stephanie

    2012-01-01

    Knowledge of high-pressure phase equilibria is crucial in many fields, e.g., for the design and optimization of high-pressure chemical and separation processes, carbon capture and storage, hydrate formation, applications of ionic liquids, and geological processes. This review presents the variety of methods to measure phase equilibria at high pressures and, following a classification, discusses the measurement principles, advantages, challenges, and error sources. Examples of application areas are given. A detailed knowledge and understanding of the different methods is fundamental not only for choosing the most suitable method for a certain task but also for the evaluation of experimental data. The discrepancy between the (sometimes low) true accuracy of published experimental data and the (high) accuracy claimed by authors is addressed. Some essential requirements for the generation of valuable experimental results are summarized.

  11. Interface high-temperature superconductivity

    Science.gov (United States)

    Wang, Lili; Ma, Xucun; Xue, Qi-Kun

    2016-12-01

    Cuprate high-temperature superconductors consist of two quasi-two-dimensional (2D) substructures: CuO2 superconducting layers and charge reservoir layers. The superconductivity is realized by charge transfer from the charge reservoir layers into the superconducting layers without chemical dopants and defects being introduced into the latter, similar to modulation-doping in the semiconductor superlattices of AlGaAs/GaAs. Inspired by this scheme, we have been searching for high-temperature superconductivity in ultra-thin films of superconductors epitaxially grown on semiconductor/oxide substrates since 2008. We have observed interface-enhanced superconductivity in both conventional and unconventional superconducting films, including single atomic layer films of Pb and In on Si substrates and single unit cell (UC) films of FeSe on SrTiO3 (STO) substrates. The discovery of high-temperature superconductivity with a superconducting gap of ∼20 meV in 1UC-FeSe/STO has stimulated tremendous interest in the superconductivity community, for it opens a new avenue for both raising superconducting transition temperature and understanding the pairing mechanism of unconventional high-temperature superconductivity. Here, we review mainly the experimental progress on interface-enhanced superconductivity in the three systems mentioned above with emphasis on 1UC-FeSe/STO, studied by scanning tunneling microscopy/spectroscopy, angle-resolved photoemission spectroscopy and transport experiments. We discuss the roles of interfaces and a possible pairing mechanism inferred from these studies.

  12. Chemistry of high temperature superconductors

    CERN Document Server

    1991-01-01

    This review volume contains the most up-to-date articles on the chemical aspects of high temperature oxide superconductors. These articles are written by some of the leading scientists in the field and includes a comprehensive list of references. This is an essential volume for researchers working in the fields of ceramics, materials science and chemistry.

  13. High Temperature Superconductor Machine Prototype

    DEFF Research Database (Denmark)

    Mijatovic, Nenad; Jensen, Bogi Bech; Træholt, Chresten

    2011-01-01

    A versatile testing platform for a High Temperature Superconductor (HTS) machine has been constructed. The stationary HTS field winding can carry up to 10 coils and it is operated at a temperature of 77K. The rotating armature is at room temperature. Test results and performance for the HTS field...

  14. Properties of high temperature SQUIDS

    Energy Technology Data Exchange (ETDEWEB)

    Falco, C. M.; Wu, C. T.

    1978-01-01

    A review is given of the present status of weak links and dc and rf biased SQUIDs made with high temperature superconductors. A method for producing reliable, reproducible devices using Nb/sub 3/Sn is outlined, and comments are made on directions future work should take.

  15. Design and performance of high-pressure PLANET beamline at pulsed neutron source at J-PARC

    Energy Technology Data Exchange (ETDEWEB)

    Hattori, T.; Sano-Furukawa, A. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Quantum Beam Science Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Arima, H. [Institute for Materials Research, Tohoku University, Sendai 980-8577 (Japan); Komatsu, K. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan); Yamada, A. [University of Shiga Prefecture, Shiga 522-8533 (Japan); Inamura, Y.; Nakatani, T. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Seto, Y. [Graduate School of Science, Kobe University, Kobe 657-8501 (Japan); Nagai, T. [Faculty of Science, Hokkaido University, Sapporo 060-0810 (Japan); Utsumi, W. [Quantum Beam Science Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Iitaka, T. [Computational Astrophysics Laboratory, RIKEN, Saitama 351-0198 (Japan); Kagi, H. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan); Katayama, Y. [Quantum Beam Science Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Inoue, T. [Geodynamic Research Center, Ehime University, Matsuyama 790-8577 (Japan); Otomo, T. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Institute of Materials Structure Science, High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki 205-001 (Japan); Suzuya, K. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Kamiyama, T. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Institute of Materials Structure Science, High Energy Accelerator Research Organization (KEK), Tsukuba, Ibaraki 205-001 (Japan); Arai, M. [J-PARC Center, Japan Atomic Energy Agency, Tokai, Naka, Ibaraki 319-1195 (Japan); Yagi, T. [Geochemical Research Center, Graduate School of Science, The University of Tokyo, Tokyo 113-0033 (Japan)

    2015-04-21

    PLANET is a time-of-flight (ToF) neutron beamline dedicated to high-pressure and high-temperature experiments. The large six-axis multi-anvil high-pressure press designed for ToF neutron diffraction experiments enables routine data collection at high pressures and high temperatures up to 10 GPa and 2000 K, respectively. To obtain clean data, the beamline is equipped with the incident slits and receiving collimators to eliminate parasitic scattering from the high-pressure cell assembly. The high performance of the diffractometer for the resolution (Δd/d~0.6%) and the accessible d-spacing range (0.2–8.4 Å) together with low-parasitic scattering characteristics enables precise structure determination of crystals and liquids under high pressure and temperature conditions.

  16. Temperature Dependent Residual Stress Models for Ultra-High-Temperature Ceramics on High Temperature Oxidation

    Science.gov (United States)

    Wang, Ruzhuan; Li, Weiguo

    2016-11-01

    The strength of SiC-depleted layer of ultra-high-temperature ceramics on high temperature oxidation degrades seriously. The research for residual stresses developed within the SiC-depleted layer is important and necessary. In this work, the residual stress evolutions in the SiC-depleted layer and the unoxidized substrate in various stages of oxidation are studied by using the characterization models. The temperature and oxidation time dependent mechanical/thermal properties of each phase in SiC-depleted layer are considered in the models. The study shows that the SiC-depleted layer would suffer from large tensile stresses due to the great temperature changes and the formation of pores on high temperature oxidation. The stresses may lead to the cracking and even the delamination of the oxidation layer.

  17. Temperature Dependent Residual Stress Models for Ultra-High-Temperature Ceramics on High Temperature Oxidation

    Science.gov (United States)

    Wang, Ruzhuan; Li, Weiguo

    2017-08-01

    The strength of SiC-depleted layer of ultra-high-temperature ceramics on high temperature oxidation degrades seriously. The research for residual stresses developed within the SiC-depleted layer is important and necessary. In this work, the residual stress evolutions in the SiC-depleted layer and the unoxidized substrate in various stages of oxidation are studied by using the characterization models. The temperature and oxidation time dependent mechanical/thermal properties of each phase in SiC-depleted layer are considered in the models. The study shows that the SiC-depleted layer would suffer from large tensile stresses due to the great temperature changes and the formation of pores on high temperature oxidation. The stresses may lead to the cracking and even the delamination of the oxidation layer.

  18. Stable magnesium peroxide at high pressure.

    Science.gov (United States)

    Lobanov, Sergey S; Zhu, Qiang; Holtgrewe, Nicholas; Prescher, Clemens; Prakapenka, Vitali B; Oganov, Artem R; Goncharov, Alexander F

    2015-09-01

    Rocky planets are thought to comprise compounds of Mg and O as these are among the most abundant elements, but knowledge of their stable phases may be incomplete. MgO is known to be remarkably stable to very high pressure and chemically inert under reduced condition of the Earth's lower mantle. However, in exoplanets oxygen may be a more abundant constituent. Here, using synchrotron x-ray diffraction in laser-heated diamond anvil cells, we show that MgO and oxygen react at pressures above 96 GPa and T = 2150 K with the formation of I4/mcm MgO2. Raman spectroscopy detects the presence of a peroxide ion (O2(2-)) in the synthesized material as well as in the recovered specimen. Likewise, energy-dispersive x-ray spectroscopy confirms that the recovered sample has higher oxygen content than pure MgO. Our finding suggests that MgO2 may be present together or instead of MgO in rocky mantles and rocky planetary cores under highly oxidized conditions.

  19. Stable magnesium peroxide at high pressure

    Science.gov (United States)

    Lobanov, Sergey S.; Zhu, Qiang; Holtgrewe, Nicholas; Prescher, Clemens; Prakapenka, Vitali B.; Oganov, Artem R.; Goncharov, Alexander F.

    2015-09-01

    Rocky planets are thought to comprise compounds of Mg and O as these are among the most abundant elements, but knowledge of their stable phases may be incomplete. MgO is known to be remarkably stable to very high pressure and chemically inert under reduced condition of the Earth’s lower mantle. However, in exoplanets oxygen may be a more abundant constituent. Here, using synchrotron x-ray diffraction in laser-heated diamond anvil cells, we show that MgO and oxygen react at pressures above 96 GPa and T = 2150 K with the formation of I4/mcm MgO2. Raman spectroscopy detects the presence of a peroxide ion (O22-) in the synthesized material as well as in the recovered specimen. Likewise, energy-dispersive x-ray spectroscopy confirms that the recovered sample has higher oxygen content than pure MgO. Our finding suggests that MgO2 may be present together or instead of MgO in rocky mantles and rocky planetary cores under highly oxidized conditions.

  20. Moessbauer study on the antiferromagnetic FeO synthesized under high pressure

    Energy Technology Data Exchange (ETDEWEB)

    Yoshikawa, Takuro [University of Tsukuba, Institute of Applied Physics (Japan); Kanke, Yasushi [National Institute of Materials Science (Japan); Yanagihara, Hideto; Kita, Eiji, E-mail: kita@bk.tsukuba.ac.jp [University of Tsukuba, Institute of Applied Physics (Japan); Tsunoda, Yorihiko [Waseda University, School of Science and Engineering (Japan); Siratori, Kiiti [University of Tsukuba, Institute of Applied Physics (Japan); Kohn, Kay [Waseda University, School of Science and Engineering (Japan)

    2012-03-15

    Moessbauer study and magnetic measurements were carried out on the stoichiometric FeO, prepared with the high pressure ({approx}5.5GPa) synthesis technique. Well known defects (Koch-Cohen clusters) in FeO are detected even in the stoichiometric specimen, prepared at high temperatures.

  1. Phylogenetic diversity of microbial communities associated with the crude-oil, large-insoluble-particle and formation-water components of the reservoir fluid from a non-flooded high-temperature petroleum reservoir.

    Science.gov (United States)

    Kobayashi, Hajime; Endo, Keita; Sakata, Susumu; Mayumi, Daisuke; Kawaguchi, Hideo; Ikarashi, Masayuki; Miyagawa, Yoshihiro; Maeda, Haruo; Sato, Kozo

    2012-02-01

    The diversity of microbial communities associated with non-water-flooded high-temperature reservoir of the Niibori oilfield was characterized. Analysis of saturated hydrocarbons revealed that n-alkanes in crude oil from the reservoir were selectively depleted, suggesting that crude oil might be mildly biodegraded in the reservoir. To examine if any specific microorganism(s) preferentially attached to the crude oil or the other components (large insoluble particles and formation water) of the reservoir fluid, 16S rRNA gene clone libraries were constructed from each component of the reservoir fluid. The clones in the archaeal libraries (414 clones in total) represented 16 phylotypes, many of which were closely related to methanogens. The bacterial libraries (700 clones in total) were composed of 49 phylotypes belonging to one of 16 phylum-level groupings, with Firmicutes containing the greatest diversity of the phylotypes. In the crude-oil- and large-insoluble-particle-associated communities, a Methanosaeta-related phylotype dominated the archaeal sequences, whereas hydrogenotrophic methanogens occupied a major portion of sequences in the library of the formation-water-associated community. The crude-oil associated bacterial community showed the largest diversity, containing 35 phylotypes, 16 of which were not detected in the other bacterial communities. Thus, although the populations associated with the reservoir-fluid components largely shared common phylogenetic context, a specific fraction of microbial species preferentially attached to the crude oil and insoluble particles. Copyright © 2011 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  2. HIGH TEMPERATURE OXIDATION PERFORMANCE OF ALUMINIDE COATINGS

    Energy Technology Data Exchange (ETDEWEB)

    Pint, B.A.; Zhang, Y.; Haynes, J.A.; Wright, I.G.

    2003-04-22

    In order to determine the potential benefits and limitations of aluminide coatings, coatings made by chemical vapor deposition (CVD) on Fe- and Ni-base alloy substrates are being evaluated in various high-temperature environments. Testing of coatings on representative ferritic (Fe-9Cr-1Mo) and austenitic (type 304L stainless steel) alloys has found that high frequency thermal cycling (1h cycle time) can significantly degrade the coating. Based on comparison with similar specimens with no thermal cycling or a longer cycle time (100h), this degradation was not due to Al loss from the coating but most likely because of the thermal expansion mismatch between the coating and the substrate. Several coated Ni-base alloys were tested in a high pressure (20atm) steam-CO2 environment for the ZEST (zero-emission steam turbine) program. Coated specimens showed less mass loss than the uncoated specimens after 1000h at 900 C and preliminary characterization examined the post-test coating structure and extent of attack.

  3. High temperature and pressure alkaline electrolysis

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mogensen, Mogens Bjerg

    2013-01-01

    and pressures. Two measurement systems were built to perform measurements under high pressures and at elevated temperatures of up to 95 bar and 250 °C, respectively. The conductivity of aqueous KOH and aqueous KOH immobilized in a porous SrTiO3 structure were investigated at elevated temperatures and high...... the operational temperature and pressure to produce pressurized hydrogen at high rate (m3 H2·h-1·m-2 cell area) and high electrical efficiency. This work describes an exploratory technical study of the possibility to produce hydrogen and oxygen with a new type of alkaline electrolysis cell at high temperatures...... concentrations of the electrolyte using the van der Pauw method in combination with electrochemical impedance spectroscopy (EIS). Conductivity values as high as 2.9 S cm-1 for 45 wt% KOH aqueous KOH and 0.84 S cm-1 for the immobilized KOH of the same concentration were measured at 200 °C. Porous SrTiO3 was used...

  4. Application of High Pressure in Food Processing

    OpenAIRE

    Herceg, Z; Režek Jambrak, A; Lelas, V.; Krešić, G.

    2011-01-01

    In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200) MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure proc...

  5. High-temperature Titanium Alloys

    Directory of Open Access Journals (Sweden)

    A.K. Gogia

    2005-04-01

    Full Text Available The development of high-temperature titanium alloys has contributed significantly to the spectacular progress in thrust-to-weight ratio of the aero gas turbines. This paper presents anoverview on the development of high-temperature titanium alloys used in aero engines and potential futuristic materials based on titanium aluminides and composites. The role of alloychemistry, processing, and microstructure, in determining the mechanical properties of titanium alloys is discussed. While phase equilibria and microstructural stability consideration haverestricted the use of conventional titanium alloys up to about 600 "C, alloys based on TiPl (or,, E,AINb (0, TiAl (y, and titaniumltitanium aluminides-based composites offer a possibility ofquantum jump in the temperature capability of titanium alloys.

  6. High Temperature Heat Exchanger Project

    Energy Technology Data Exchange (ETDEWEB)

    Anthony E. Hechanova, Ph.D.

    2008-09-30

    The UNLV Research Foundation assembled a research consortium for high temperature heat exchanger design and materials compatibility and performance comprised of university and private industry partners under the auspices of the US DOE-NE Nuclear Hydrogen Initiative in October 2003. The objectives of the consortium were to conduct investigations of candidate materials for high temperature heat exchanger componets in hydrogen production processes and design and perform prototypical testing of heat exchangers. The initial research of the consortium focused on the intermediate heat exchanger (located between the nuclear reactor and hydrogen production plan) and the components for the hydrogen iodine decomposition process and sulfuric acid decomposition process. These heat exchanger components were deemed the most challenging from a materials performance and compatibility perspective

  7. Motor for High Temperature Applications

    Science.gov (United States)

    Roopnarine (Inventor)

    2013-01-01

    A high temperature motor has a stator with poles formed by wire windings, and a rotor with magnetic poles on a rotor shaft positioned coaxially within the stator. The stator and rotor are built up from stacks of magnetic-alloy laminations. The stator windings are made of high temperature magnet wire insulated with a vitreous enamel film, and the wire windings are bonded together with ceramic binder. A thin-walled cylinder is positioned coaxially between the rotor and the stator to prevent debris from the stator windings from reaching the rotor. The stator windings are wound on wire spools made of ceramic, thereby avoiding need for mica insulation and epoxy/adhesive. The stator and rotor are encased in a stator housing with rear and front end caps, and rear and front bearings for the rotor shaft are mounted on external sides of the end caps to keep debris from the motor migrating into the bearings' races.

  8. Very High Temperature Sound Absorption Coating Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Phase I demonstrated experimentally a very high temperature acoustically absorbing coating for ducted acoustics applications. High temperature survivability at 3500...

  9. High Temperature Radio Frequency Loads

    CERN Document Server

    Federmann, S; Grudiev, A; Montesinos, E; Syratchev, I

    2011-01-01

    In the context of energy saving and recovery requirements the design of reliable and robust RF power loads which permit a high outlet temperature and high pressure of the cooling water is desirable. Cooling water arriving at the outlet withmore than 150 ◦C and high pressure has a higher value than water with 50 ◦C under low pressure. Conventional RF power loads containing dielectric and magnetic materials as well as sensitive ceramic windows usually do not permit going much higher than 90 ◦C. Here we present and discuss several design concepts for "metal only" RF high power loads. One concept is the application of magnetic steel corrugated waveguides near cutoff – this concept could find practical use above several GHz. Another solution are resonant structures made of steel to be installed in large waveguides for frequencies of 500 MHz or lower. Similar resonant structures above 100 MHz taking advantage of the rather high losses of normal steel may also be used in coaxial line geometries with large di...

  10. High pressure processing for food safety.

    Science.gov (United States)

    Fonberg-Broczek, Monika; Windyga, B; Szczawiński, J; Szczawińska, M; Pietrzak, D; Prestamo, G

    2005-01-01

    Food preservation using high pressure is a promising technique in food industry as it offers numerous opportunities for developing new foods with extended shelf-life, high nutritional value and excellent organoleptic characteristics. High pressure is an alternative to thermal processing. The resistance of microorganisms to pressure varies considerably depending on the pressure range applied, temperature and treatment duration, and type of microorganism. Generally, Gram-positive bacteria are more resistant to pressure than Gram-negative bacteria, moulds and yeasts; the most resistant are bacterial spores. The nature of the food is also important, as it may contain substances which protect the microorganism from high pressure. This article presents results of our studies involving the effect of high pressure on survival of some pathogenic bacteria -- Listeria monocytogenes, Aeromonas hydrophila and Enterococcus hirae -- in artificially contaminated cooked ham, ripening hard cheese and fruit juices. The results indicate that in samples of investigated foods the number of these microorganisms decreased proportionally to the pressure used and the duration of treatment, and the effect of these two factors was statistically significant (level of probability, P high pressure treatment than L. monocytogenes and A. hydrophila. Mathematical methods were applied, for accurate prediction of the effects of high pressure on microorganisms. The usefulness of high pressure treatment for inactivation of microorganisms and shelf-life extention of meat products was also evaluated. The results obtained show that high pressure treatment extends the shelf-life of cooked pork ham and raw smoked pork loin up to 8 weeks, ensuring good micro-biological and sensory quality of the products.

  11. Exploring the Phase Diagram SiO2-CO2 at High Pressures and Temperatures

    Science.gov (United States)

    Kavner, A.

    2015-12-01

    CO2 is an important volatile system relevant for planetary sciences and fundamental chemistry. Molecular CO2 has doubly bonded O=C=O units but high pressure-high temperature (HP-HT) studies have recently shown its transformation into a three-dimensional network of corner-linked [CO4] units analogous to the silica mineral polymorphs, through intermediate non-molecular phases. Here, we report P-V-T data on CO2-IV ice from time-of-flight neutron diffraction experiments, which allow determining the compressibility and thermal expansivity of this intermediate molecular-to-non-molecular phase.1 Aditionally, we have explored the SiO2-CO2 phase diagram and the potential formation of silicon carbonate compounds. New data obtained by laser-heating diamond-anvil experiments in CO2-filled microporous silica polymorphs will be shown. In particular, these HP-HT experiments explore the existence of potential CO2/SiO2 compounds with tetrahedrally-coordinated C/Si atoms by oxygens, which are predicted to be stable (or metastable) by state-of-the-art ab initio simulations.2,3 These theoretical predictions were supported by a recent study that reports the formation of a cristobalite-type Si0.4C0.6O2 solid solution at high-pressures and temperatures, which can be retained as a metastable solid down to ambient conditions.4 Entirely new families of structures could exist based on [CO4]4- units in various degrees of polymerisation, giving rise to a range of chain, sheet and framework solids like those found in silicate chemistry. References[1] S. Palaich et al., Am. Mineral. Submitted (2015) [2] A. Morales-Garcia et al., Theor. Chem. Acc. 132, 1308 (2013) [3] R. Zhou et al., Phys. Rev. X, 4, 011030 (2014) [4] M. Santoro et al. Nature Commun. 5, 3761 (2014)

  12. Packaging Technologies for High Temperature Electronics and Sensors

    Science.gov (United States)

    Chen, Liangyu; Hunter, Gary W.; Neudeck, Philip G.; Beheim, Glenn M.; Spry, David J.; Meredith, Roger D.

    2013-01-01

    This paper reviews ceramic substrates and thick-film metallization based packaging technologies in development for 500degC silicon carbide (SiC) electronics and sensors. Prototype high temperature ceramic chip-level packages and printed circuit boards (PCBs) based on ceramic substrates of aluminum oxide (Al2O3) and aluminum nitride (AlN) have been designed and fabricated. These ceramic substrate-based chiplevel packages with gold (Au) thick-film metallization have been electrically characterized at temperatures up to 550degC. A 96% alumina based edge connector for a PCB level subsystem interconnection has also been demonstrated recently. The 96% alumina packaging system composed of chip-level packages and PCBs has been tested with high temperature SiC devices at 500degC for over 10,000 hours. In addition to tests in a laboratory environment, a SiC JFET with a packaging system composed of a 96% alumina chip-level package and an alumina printed circuit board mounted on a data acquisition circuit board was launched as a part of the MISSE-7 suite to the International Space Station via a Shuttle mission. This packaged SiC transistor was successfully tested in orbit for eighteen months. A spark-plug type sensor package designed for high temperature SiC capacitive pressure sensors was developed. This sensor package combines the high temperature interconnection system with a commercial high temperature high pressure stainless steel seal gland (electrical feed-through). Test results of a packaged high temperature capacitive pressure sensor at 500degC are also discussed. In addition to the pressure sensor package, efforts for packaging high temperature SiC diode-based gas chemical sensors are in process.

  13. The Effect of High Pressure Techniques on the Stability of Anthocyanins in Fruit and Vegetables

    Directory of Open Access Journals (Sweden)

    Krystian Marszałek

    2017-01-01

    Full Text Available Anthocyanins are a group of phenolic compounds responsible for red, blue and violet colouration of many fruits, vegetables and flowers. The high content of these pigments is important as it influences directly their health promoting properties as well as the sensory quality of the product; however they are prone to degradation by, inter alia, elevated temperature and tissue enzymes. The traditional thermal methods of food preservation cause significant losses of these pigments. Thus, novel non-thermal techniques such as high pressure processing, high pressure carbon dioxide and high pressure homogenization are under consideration. In this review, the authors attempted to summarize the current knowledge of the impact of high pressure techniques on the stability of anthocyanins during processing and storage of fruit and vegetable products. Furthermore, the effect of the activity of enzymes involved in the degradation of these compounds has been described. The conclusions including comparisons of pressure-based methods with high temperature preservation techniques were presented.

  14. Final Report. IUT No. B560420 with UC Berkeley. Organic Chemistry at High Pressures &Temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Montgomery, W; Crowhurst, J C; Zaug, J M; Jeanloz, R

    2007-03-20

    We have successfully completed the research outlined in our proposal: Organic Chemistry at High Pressures and Temperatures. We have experimentally determined a phase diagram which documents the phases and reaction regimes of cyanuric acid , H{sub 3}C{sub 3}N{sub 3}O{sub 3} (1,3,5-triazine-2,4,6-trione), from 300 - 750 K and 0 - 8.1 GPa. We utilized a comparatively new technique to study thin samples of cyanuric acid in the diamond anvil cell in order to collect ambient temperature, high pressure FTIR and Raman data as well as the high-pressure, high-temperature data used in the phase diagram. These experiments made use of the CMLS High-pressure lab's diamond anvil facilities as well as the FTIR and Raman systems.

  15. The Effect of High Pressure Techniques on the Stability of Anthocyanins in Fruit and Vegetables.

    Science.gov (United States)

    Marszałek, Krystian; Woźniak, Łukasz; Kruszewski, Bartosz; Skąpska, Sylwia

    2017-01-27

    Anthocyanins are a group of phenolic compounds responsible for red, blue and violet colouration of many fruits, vegetables and flowers. The high content of these pigments is important as it influences directly their health promoting properties as well as the sensory quality of the product; however they are prone to degradation by, inter alia, elevated temperature and tissue enzymes. The traditional thermal methods of food preservation cause significant losses of these pigments. Thus, novel non-thermal techniques such as high pressure processing, high pressure carbon dioxide and high pressure homogenization are under consideration. In this review, the authors attempted to summarize the current knowledge of the impact of high pressure techniques on the stability of anthocyanins during processing and storage of fruit and vegetable products. Furthermore, the effect of the activity of enzymes involved in the degradation of these compounds has been described. The conclusions including comparisons of pressure-based methods with high temperature preservation techniques were presented.

  16. Directs measurement of high temperature/high pressure solubility of methane and carbon dioxide in polyamide (PA-11) using a high-pressure microbalance

    DEFF Research Database (Denmark)

    von Solms, Nicolas; Rubin, A; Andersen, Simon Ivar

    2005-01-01

    Experiments to determine the Solubility of methane and carbon dioxide in PA-11 have been performed in the temperature range 50-90&DEG; C and the pressure ranges 50-150 bar for methane and 20-40 bar for carbon dioxide. In general, the results agree fairly well with previous experiments for similar...... to more uncertainty than the solubility measurements, the expected (Arrhenius) trends are observed. Agreement with other experimental data using different methods is also good....

  17. Passivation of high temperature superconductors

    Science.gov (United States)

    Vasquez, Richard P. (Inventor)

    1991-01-01

    The surface of high temperature superconductors such as YBa2Cu3O(7-x) are passivated by reacting the native Y, Ba and Cu metal ions with an anion such as sulfate or oxalate to form a surface film that is impervious to water and has a solubility in water of no more than 10(exp -3) M. The passivating treatment is preferably conducted by immersing the surface in dilute aqueous acid solution since more soluble species dissolve into the solution. The treatment does not degrade the superconducting properties of the bulk material.

  18. High Temperature Sorbents for Oxygen

    Science.gov (United States)

    Sharma, Pramod K. (Inventor)

    1996-01-01

    A sorbent capable of removing trace amounts of oxygen (ppt) from a gas stream at a high temperature above 200 C is introduced. The sorbent comprises a porous alumina silicate support such as zeolite containing from 1 to 10 percent by weight of ion exchanged transition metal such as copper or cobalt ions and 0.05 to 1.0 percent by weight of an activator selected from a platinum group metal such as platinum. The activation temperature, oxygen sorption and reducibility are all improved by the presence of the platinum activator.

  19. High temperature structural sandwich panels

    Science.gov (United States)

    Papakonstantinou, Christos G.

    High strength composites are being used for making lightweight structural panels that are being employed in aerospace, naval and automotive structures. Recently, there is renewed interest in use of these panels. The major problem of most commercial available sandwich panels is the fire resistance. A recently developed inorganic matrix is investigated for use in cases where fire and high temperature resistance are necessary. The focus of this dissertation is the development of a fireproof composite structural system. Sandwich panels made with polysialate matrices have an excellent potential for use in applications where exposure to high temperatures or fire is a concern. Commercial available sandwich panels will soften and lose nearly all of their compressive strength temperatures lower than 400°C. This dissertation consists of the state of the art, the experimental investigation and the analytical modeling. The state of the art covers the performance of existing high temperature composites, sandwich panels and reinforced concrete beams strengthened with Fiber Reinforced Polymers (FRP). The experimental part consists of four major components: (i) Development of a fireproof syntactic foam with maximum specific strength, (ii) Development of a lightweight syntactic foam based on polystyrene spheres, (iii) Development of the composite system for the skins. The variables are the skin thickness, modulus of elasticity of skin and high temperature resistance, and (iv) Experimental evaluation of the flexural behavior of sandwich panels. Analytical modeling consists of a model for the flexural behavior of lightweight sandwich panels, and a model for deflection calculations of reinforced concrete beams strengthened with FRP subjected to fatigue loading. The experimental and analytical results show that sandwich panels made with polysialate matrices and ceramic spheres do not lose their load bearing capability during severe fire exposure, where temperatures reach several

  20. Probing Hydrogen Diffusion under High Pressure

    Science.gov (United States)

    Bove, L. E.; Klotz, S.; Strassle, T.; Saitta, M.

    2012-12-01

    The study of the microscopic mechanism governing hydrogen and hydrogen-based liquids (as water, ammonia and methane) diffusion is crucial for a variety of scientific issues spanning most of natural sciences. As an example, characterizing hydrogen diffusion in a confined medium, like in porous systems or zeolites, is fundamental in problems relating to environment, hydrogen storage and industrial applications [1]. The presence of water diffusion in the minerals of the Earth's mantle have strong incidence on the processes governing volcanic eruptions and intermediate-depth seismicity. As last example, knowing in details the microscopic dynamics of hydrogen-based simple liquids under extreme conditions is essential in order to interpret observations and develop models of planet interiors [2]. On the other hand, water and other simple hydrogen-based liquids have always been key systems in the development of modern condensed-matter physics, because of their simple electronic structure and the peculiar properties deriving from the hydrogen-bond network. Their high compressibility and chemical reactivity have made these systems very challenging to study experimentally under static high P-T conditions. In the last few years, a large effort has been undertaken by several groups around the world [2] to extend the static and dynamic techniques to high temperatures and pressures, a program in which our group has been actively involved [3-6]. However, while the structure of water and other hydrogenated liquids of geological interest, is now known up to almost 20 GPa, the study of their transport properties greatly lags behind. We have recently developed a new large-volume gasket-anvil ensemble for the Paris-Edinburgh press based on a novel toroidal design [7], which allows to perform quasi elastic neutron scattering measurements on hydrogen based liquids up to one order of magnitude higher pressures (5 GPa) respect to what was achievable with standard methods [8]. The large

  1. High temperature catalytic membrane reactors

    Energy Technology Data Exchange (ETDEWEB)

    1990-03-01

    Current state-of-the-art inorganic oxide membranes offer the potential of being modified to yield catalytic properties. The resulting modules may be configured to simultaneously induce catalytic reactions with product concentration and separation in a single processing step. Processes utilizing such catalytically active membrane reactors have the potential for dramatically increasing yield reactions which are currently limited by either thermodynamic equilibria, product inhibition, or kinetic selectivity. Examples of commercial interest include hydrogenation, dehydrogenation, partial and selective oxidation, hydrations, hydrocarbon cracking, olefin metathesis, hydroformylation, and olefin polymerization. A large portion of the most significant reactions fall into the category of high temperature, gas phase chemical and petrochemical processes. Microporous oxide membranes are well suited for these applications. A program is proposed to investigate selected model reactions of commercial interest (i.e. dehydrogenation of ethylbenzene to styrene and dehydrogenation of butane to butadiene) using a high temperature catalytic membrane reactor. Membranes will be developed, reaction dynamics characterized, and production processes developed, culminating in laboratory-scale demonstration of technical and economic feasibility. As a result, the anticipated increased yield per reactor pass economic incentives are envisioned. First, a large decrease in the temperature required to obtain high yield should be possible because of the reduced driving force requirement. Significantly higher conversion per pass implies a reduced recycle ratio, as well as reduced reactor size. Both factors result in reduced capital costs, as well as savings in cost of reactants and energy.

  2. High-temperature organic-fluid fouling unit

    Energy Technology Data Exchange (ETDEWEB)

    Kuru, W.C.; Panchal, C.B.

    1997-06-01

    A new type of fouling unit is developed for high-temperature (500 C) and high-pressure (70 atmosphere) fouling experiments by modifying a commercial autoclave. Key modifications are the installation of a helical impeller in a flow tube and a fouling probe in the autoclave to simulate the fluid dynamics and heat transfer of typical heat-exchange equipment. A calibration technique is described, and fouling results are presented for experimental runs with indene and kerosene. The results are compared with those obtained using other types of fouling test units. Other potential applications of the fouling unit, such as corrosion and micro-scale reaction experiments, are discussed.

  3. The high-pressure phase of CePtAl

    Energy Technology Data Exchange (ETDEWEB)

    Heymann, Gunter [Univ. Innsbruck (Austria). Inst. fuer Allgemeine, Anorganische und Theoretische Chemie; Heying, Birgit; Rodewald, Ute C. [Univ. Muenster (Germany). Inst. fuer Anorganische und Analytische Chemie; Janka, Oliver [Univ. Muenster (Germany). Inst. fuer Anorganische und Analytische Chemie; Univ. Oldenburg (Germany). Inst. fuer Chemie

    2017-03-01

    The intermetallic aluminum compound HP-CePtAl was synthesized by arc melting of the elements with subsequent high-pressure/high-temperature treatment at 1620 K and 10.5 GPa in a multianvil press. The compound crystallizes in the hexagonal MgZn{sub 2}-type structure (P6{sub 3}/mmc) with lattice parameters of a=552.7(1) and c=898.8(2) pm refined from powder X-ray diffraction data. With the help of single crystal investigations (wR=0.0527, 187 F{sup 2} values, 13 variables), the proposed structure type was confirmed and the mixed Pt/Al site occupations could be refined. Magnetic susceptibility measurements showed a disappearance of the complex magnetic ordering phenomena, which are observed in NP-CePtAl.

  4. Ultra-High Pressure Modeling and Experiments Review

    Energy Technology Data Exchange (ETDEWEB)

    Costantino, M; Darnell, I

    2004-06-01

    The RDHWT/MARIAH II energy addition, run time, and mass flow rate requirement simply large air and nitrogen fluid volumes at the highest practicable static enthalpy. The objective of the gas supply concept development is the satisfaction of ultra-high pressure (UHP), high temperature thermodynamic requirements in a facility with acceptable safety and economic risks. The primary challenges for the mechanical design are connecting multiple volumes at pressures greater than 1,400MPa and temperatures greater than 500 K; fabricating high strength steel sections approximately 2 m in typical dimension, and reacting the pressure-related forces in the system. In the 'octahedral module' concept, four UHP intensifiers and two UHP manifolds are arranged in an 'octahedral' geometry that results in acceptable deviatoric stresses at cross bores. Multiple modules join to provide the required UHP volume at a stagnation pressure of 2100MPa and stagnation temperature of 750 K.

  5. Superhard Semiconducting Optically Transparent High Pressure Phase of Boron

    Energy Technology Data Exchange (ETDEWEB)

    Zarechnaya, E.Yu.; Dubrovinsky, L.; Dubrovinskaia, N.; Filinchuk, Y.; Chernyshov, D.; Dmitriev, V.; Miyajima, N.; Goresy, A. El; Braun, H.F.; Van Smaalen, S.; Kantor, I.; Kantor, A.; Prakapenka, V.; Hanfland, M.; Mikhaylushkin, A.S.; Abrikosov, I.A.; Simak, S.I.; (Link); (Heidelberg); (Bayreuth); (ESRF); (UC)

    2009-05-21

    An orthorhombic (space group Pnnm) boron phase was synthesized at pressures above 9 GPa and high temperature, and it was demonstrated to be stable at least up to 30 GPa. The structure, determined by single-crystal x-ray diffraction, consists of B{sub 12} icosahedra and B{sub 2} dumbbells. The charge density distribution obtained from experimental data and ab initio calculations suggests covalent chemical bonding in this phase. Strong covalent interatomic interactions explain the low compressibility value (bulk modulus is K{sub 300} = 227 GPa) and high hardness of high-pressure boron (Vickers hardness H{sub v} = 58 GPa), after diamond the second hardest elemental material.

  6. The phase diagram of high-pressure superionic ice

    Science.gov (United States)

    Sun, Jiming; Clark, Bryan K.; Torquato, Salvatore; Car, Roberto

    2015-08-01

    Superionic ice is a special group of ice phases at high temperature and pressure, which may exist in ice-rich planets and exoplanets. In superionic ice liquid hydrogen coexists with a crystalline oxygen sublattice. At high pressures, the properties of superionic ice are largely unknown. Here we report evidence that from 280 GPa to 1.3 TPa, there are several competing phases within the close-packed oxygen sublattice. At even higher pressure, the close-packed structure of the oxygen sublattice becomes unstable to a new unusual superionic phase in which the oxygen sublattice takes the P21/c symmetry. We also discover that higher pressure phases have lower transition temperatures. The diffusive hydrogen in the P21/c superionic phase shows strong anisotropic behaviour and forms a quasi-two-dimensional liquid. The ionic conductivity changes abruptly in the solid to close-packed superionic phase transition, but continuously in the solid to P21/c superionic phase transition.

  7. Part-load performance of a high temperature Kalina cycle

    DEFF Research Database (Denmark)

    Modi, Anish; Andreasen, Jesper Graa; Kærn, Martin Ryhl

    2015-01-01

    bottoming cycle, and solar power plants. The high temperature cycle layouts are inherently more complex than the low temperature layouts due to the presence of a distillation-condensation subsystem, three pressure levels, and several heat exchangers. This paper presents a detailed approach to solve...... the Kalina cycle in part-load operating conditions for high temperature (a turbine inlet temperature of 500 °C) and high pressure (100 bar) applications. A central receiver concentrating solar power plant with direct vapour generation is considered as a case study where the part-load conditions are simulated...... by changing the solar heat input to the receiver. Compared with the steam Rankine cycle, the Kalina cycle has an additional degree of freedom in terms of the ammonia mass fraction which can be varied in order to maximize the part-load efficiency of the cycle. The results include the part-load curves...

  8. HIgh Temperature Photocatalysis over Semiconductors

    Science.gov (United States)

    Westrich, Thomas A.

    Due in large part to in prevalence of solar energy, increasing demand of energy production (from all sources), and the uncertain future of petroleum energy feedstocks, solar energy harvesting and other photochemical systems will play a major role in the developing energy market. This dissertation focuses on a novel photochemical reaction process: high temperature photocatalysis (i.e., photocatalysis conducted above ambient temperatures, T ≥ 100°C). The overarching hypothesis of this process is that photo-generated charge carriers are able to constructively participate in thermo-catalytic chemical reactions, thereby increasing catalytic rates at one temperature, or maintaining catalytic rates at lower temperatures. The photocatalytic oxidation of carbon deposits in an operational hydrocarbon reformer is one envisioned application of high temperature photocatalysis. Carbon build-up during hydrocarbon reforming results in catalyst deactivation, in the worst cases, this was shown to happen in a period of minutes with a liquid hydrocarbon. In the presence of steam, oxygen, and above-ambient temperatures, carbonaceous deposits were photocatalytically oxidized over very long periods (t ≥ 24 hours). This initial experiment exemplified the necessity of a fundamental assessment of high temperature photocatalytic activity. Fundamental understanding of the mechanisms that affect photocatalytic activity as a function of temperatures was achieved using an ethylene photocatalytic oxidation probe reaction. Maximum ethylene photocatalytic oxidation rates were observed between 100 °C and 200 °C; the maximum photocatalytic rates were approximately a factor of 2 larger than photocatalytic rates at ambient temperatures. The loss of photocatalytic activity at temperatures above 200 °C is due to a non-radiative multi-phonon recombination mechanism. Further, it was shown that the fundamental rate of recombination (as a function of temperature) can be effectively modeled as a

  9. Structures of Liquid Aluminium under High Pressure

    Institute of Scientific and Technical Information of China (English)

    LI Hui; WANG Guang-Hou; BIAN Xiu-Fang; ZHANG Lin

    2001-01-01

    Molecular dynamics simulation has been carried out for melt A1 under constant temperature and constant pressure. The interaction between atoms is described by tight-binding many-body potentials based on the second moment approximation to the electronic density of states. The pair correlation function and the pair analysis technique are used to reveal the structural features of liquid Al under normal and high pressure. High pressure is favourable to the existence of bcc clusters 1661 and 1441, but has no effect on the fcc cluster 1421. The bond pair 1551 and 1541 with fivefold symmetry exists at high pressure. The microstructure of liquid is more similar to the non-crystalline structure than to the crystalline structure. The simulation results are supported by thex-ray experimental results.

  10. Laser techniques in high-pressure geophysics

    Science.gov (United States)

    Hemley, R. J.; Bell, P. M.; Mao, H. K.

    1987-01-01

    Laser techniques in conjunction with the diamond-anvil cell can be used to study high-pressure properties of materials important to a wide range of problems in earth and planetary science. Spontaneous Raman scattering of crystalline and amorphous solids at high pressure demonstrates that dramatic changes in structure and bonding occur on compression. High-pressure Brillouin scattering is sensitive to the pressure variations of single-crystal elastic moduli and acoustic velocities. Laser heating techniques with the diamond-anvil cell can be used to study phase transitions, including melting, under deep-earth conditions. Finally, laser-induced ruby fluorescence has been essential for the development of techniques for generating the maximum pressures now possible with the diamond-anvil cell, and currently provides a calibrated in situ measure of pressure well above 100 gigapascals.

  11. Laser techniques in high-pressure geophysics

    Science.gov (United States)

    Hemley, R. J.; Bell, P. M.; Mao, H. K.

    1987-01-01

    Laser techniques in conjunction with the diamond-anvil cell can be used to study high-pressure properties of materials important to a wide range of problems in earth and planetary science. Spontaneous Raman scattering of crystalline and amorphous solids at high pressure demonstrates that dramatic changes in structure and bonding occur on compression. High-pressure Brillouin scattering is sensitive to the pressure variations of single-crystal elastic moduli and acoustic velocities. Laser heating techniques with the diamond-anvil cell can be used to study phase transitions, including melting, under deep-earth conditions. Finally, laser-induced ruby fluorescence has been essential for the development of techniques for generating the maximum pressures now possible with the diamond-anvil cell, and currently provides a calibrated in situ measure of pressure well above 100 gigapascals.

  12. Curved and conformal high-pressure vessel

    Energy Technology Data Exchange (ETDEWEB)

    Croteau, Paul F.; Kuczek, Andrzej E.; Zhao, Wenping

    2016-10-25

    A high-pressure vessel is provided. The high-pressure vessel may comprise a first chamber defined at least partially by a first wall, and a second chamber defined at least partially by the first wall. The first chamber and the second chamber may form a curved contour of the high-pressure vessel. A modular tank assembly is also provided, and may comprise a first mid tube having a convex geometry. The first mid tube may be defined by a first inner wall, a curved wall extending from the first inner wall, and a second inner wall extending from the curved wall. The first inner wall may be disposed at an angle relative to the second inner wall. The first mid tube may further be defined by a short curved wall opposite the curved wall and extending from the second inner wall to the first inner wall.

  13. Thermodynamic properties of liquid sodium under high pressure

    Science.gov (United States)

    Li, Huaming; Zhang, Xiaoxiao; Sun, Yongli; Li, Mo

    2017-04-01

    Acquiring reliable thermodynamic properties in liquid metals at high pressure and temperature is still a challenge in both experiment and theory. Equation of state (EoS) offers an alternative approach free of many of the difficulties. Here using the EoS of a power law form we obtained the thermodynamic properties of liquid sodium under pressure along the isothermal lines, including isothermal buck modulus, thermal expansion coefficient, Grüneisen parameter, and Anderson-Grüneisen parameter. The results are in excellent agreement with available experimental data measured by a piezometer at high temperature and high pressure and sound velocity measurement with pulse-echo technique. We found that the pressure derivative of the isothermal bulk modulus at zero pressure is a monotonic function of temperature and has a value around 4. In addition, unexpected crossing points were found in the isobaric thermal expansion coefficient and Grüneisen parameter; and a minimum in the isobaric heat under isothermal compression was also observed. While some of these detailed predictions are yet to be confirmed by further experiment, our results suggest that the power law form may be a more suitable choice for the EoS of liquids metals.

  14. High stored energy of metallic glasses induced by high pressure

    Science.gov (United States)

    Wang, C.; Yang, Z. Z.; Ma, T.; Sun, Y. T.; Yin, Y. Y.; Gong, Y.; Gu, L.; Wen, P.; Zhu, P. W.; Long, Y. W.; Yu, X. H.; Jin, C. Q.; Wang, W. H.; Bai, H. Y.

    2017-03-01

    Modulating energy states of metallic glasses (MGs) is significant in understanding the nature of glasses and controlling their properties. In this study, we show that high stored energy can be achieved and preserved in bulk MGs by high pressure (HP) annealing, which is a controllable method to continuously alter the energy states of MGs. Contrary to the decrease in enthalpy by conventional annealing at ambient pressure, high stored energy can occur and be enhanced by increasing both annealing temperature and pressure. By using double aberration corrected scanning transmission electron microscopy, it is revealed that the preserved high energy, which is attributed to the coupling effect of high pressure and high temperature, originates from the microstructural change that involves "negative flow units" with a higher atomic packing density compared to that of the elastic matrix of MGs. The results demonstrate that HP-annealing is an effective way to activate MGs into higher energy states, and it may assist in understanding the microstructural origin of high energy states in MGs.

  15. Superconductive "sodalite"-like clathrate calcium hydride at high pressures

    CERN Document Server

    Wang, Hui; Tanaka, Kaori; Iitaka, Toshiaki; Ma, Yanming

    2012-01-01

    Hydrogen-rich compounds hold promise as high-temperature superconductors under high pressures. Recent theoretical hydride structures on achieving high-pressure superconductivity are composed mainly of H2 fragments. Through a systematic investigation of Ca hydrides with different hydrogen contents using particle-swam optimization structural search, we show that in the stoichiometry CaH6 a body-centred cubic structure with hydrogen that forms unusual "sodalite" cages containing enclathrated Ca stabilizes above pressure 150 GPa. The stability of this structure is derived from the acceptance by two H2 of electrons donated by Ca forming a "H4" unit as the building block in the construction of the 3-dimensional sodalite cage. This unique structure has a partial occupation of the degenerated orbitals at the zone centre. The resultant dynamic Jahn-Teller effect helps to enhance electron-phonon coupling and leads to superconductivity of CaH6. A superconducting critical temperature (Tc) of 220-235 K at 150 GPa obtained...

  16. Nonlinear plasmonics at high temperatures

    CERN Document Server

    Sivan, Yonatan

    2016-01-01

    We solve the Maxwell and heat equations self-consistently for metal nanoparticles under intense continuous wave (CW) illumination. Unlike previous studies, we rely on {\\em experimentally}-measured data for the metal permittivity for increasing temperature and for the visible spectral range. We show that the thermal nonlinearity of the metal can lead to substantial deviations from the predictions of the linear model for the temperature and field distribution, and thus, can explain qualitatively the strong nonlinear scattering from such configurations observed experimentally. We also show that the incompleteness of existing data of the temperature dependence of the thermal properties of the system prevents reaching a quantitative agreement between the measured and calculated scattering data. This modelling approach is essential for the identification of the underlying physical mechanism responsible for the thermo-optical nonlinearity of the metal and should be adopted in all applications of high temperature non...

  17. Nonlinear plasmonics at high temperatures

    Directory of Open Access Journals (Sweden)

    Sivan Yonatan

    2017-01-01

    Full Text Available We solve the Maxwell and heat equations self-consistently for metal nanoparticles under intense continuous wave (CW illumination. Unlike previous studies, we rely on experimentally-measured data for metal permittivity for increasing temperature and for the visible spectral range. We show that the thermal nonlinearity of the metal can lead to substantial deviations from the predictions of the linear model for the temperature and field distribution and, thus, can explain qualitatively the strong nonlinear scattering from such configurations observed experimentally. We also show that the incompleteness of existing data of the temperature dependence of the thermal properties of the system prevents reaching a quantitative agreement between the measured and calculated scattering data. This modeling approach is essential for the identification of the underlying physical mechanism responsible for the thermo-optical nonlinearity of the metal and should be adopted in all applications of high-temperature nonlinear plasmonics, especially for refractory metals, for both CW and pulsed illumination.

  18. Nonlinear plasmonics at high temperatures

    Science.gov (United States)

    Sivan, Yonatan; Chu, Shi-Wei

    2017-01-01

    We solve the Maxwell and heat equations self-consistently for metal nanoparticles under intense continuous wave (CW) illumination. Unlike previous studies, we rely on experimentally-measured data for metal permittivity for increasing temperature and for the visible spectral range. We show that the thermal nonlinearity of the metal can lead to substantial deviations from the predictions of the linear model for the temperature and field distribution and, thus, can explain qualitatively the strong nonlinear scattering from such configurations observed experimentally. We also show that the incompleteness of existing data of the temperature dependence of the thermal properties of the system prevents reaching a quantitative agreement between the measured and calculated scattering data. This modeling approach is essential for the identification of the underlying physical mechanism responsible for the thermo-optical nonlinearity of the metal and should be adopted in all applications of high-temperature nonlinear plasmonics, especially for refractory metals, for both CW and pulsed illumination.

  19. Faraday imaging at high temperatures

    Science.gov (United States)

    Hackel, Lloyd A.; Reichert, Patrick

    1997-01-01

    A Faraday filter rejects background light from self-luminous thermal objects, but transmits laser light at the passband wavelength, thus providing an ultra-narrow optical bandpass filter. The filter preserves images so a camera looking through a Faraday filter at a hot target illuminated by a laser will not see the thermal radiation but will see the laser radiation. Faraday filters are useful for monitoring or inspecting the uranium separator chamber in an atomic vapor laser isotope separation process. Other uses include viewing welds, furnaces, plasma jets, combustion chambers, and other high temperature objects. These filters are can be produced at many discrete wavelengths. A Faraday filter consists of a pair of crossed polarizers on either side of a heated vapor cell mounted inside a solenoid.

  20. High temperature control rod assembly

    Energy Technology Data Exchange (ETDEWEB)

    Vollman, Russell E. (Solana Beach, CA)

    1991-01-01

    A high temperature nuclear control rod assembly comprises a plurality of substantially cylindrical segments flexibly joined together in succession by ball joints. The segments are made of a high temperature graphite or carbon-carbon composite. The segment includes a hollow cylindrical sleeve which has an opening for receiving neutron-absorbing material in the form of pellets or compacted rings. The sleeve has a threaded sleeve bore and outer threaded surface. A cylindrical support post has a threaded shaft at one end which is threadably engaged with the sleeve bore to rigidly couple the support post to the sleeve. The other end of the post is formed with a ball portion. A hollow cylindrical collar has an inner threaded surface engageable with the outer threaded surface of the sleeve to rigidly couple the collar to the sleeve. the collar also has a socket portion which cooperates with the ball portion to flexibly connect segments together to form a ball and socket-type joint. In another embodiment, the segment comprises a support member which has a threaded shaft portion and a ball surface portion. The threaded shaft portion is engageable with an inner threaded surface of a ring for rigidly coupling the support member to the ring. The ring in turn has an outer surface at one end which is threadably engageably with a hollow cylindrical sleeve. The other end of the sleeve is formed with a socket portion for engagement with a ball portion of the support member. In yet another embodiment, a secondary rod is slidably inserted in a hollow channel through the center of the segment to provide additional strength. A method for controlling a nuclear reactor utilizing the control rod assembly is also included.

  1. High pressure water jet cutting and stripping

    Science.gov (United States)

    Hoppe, David T.; Babai, Majid K.

    1991-01-01

    High pressure water cutting techniques have a wide range of applications to the American space effort. Hydroblasting techniques are commonly used during the refurbishment of the reusable solid rocket motors. The process can be controlled to strip a thermal protective ablator without incurring any damage to the painted surface underneath by using a variation of possible parameters. Hydroblasting is a technique which is easily automated. Automation removes personnel from the hostile environment of the high pressure water. Computer controlled robots can perform the same task in a fraction of the time that would be required by manual operation.

  2. High-pressure oxidation of ethane

    DEFF Research Database (Denmark)

    Hashemi, Hamid; G. Jacobsen, Jon; Rasmussen, Christian T.

    2017-01-01

    Ethane oxidation at intermediate temperatures and high pressures has been investigated in both a laminar flow reactor and a rapid compression machine (RCM). The flow-reactor measurements at 600–900 K and 20–100 bar showed an onset temperature for oxidation of ethane between 700 and 825 K, depending...... as well as results at elevated pressure from literature. The experimental results and the modeling predictions do not support occurrence of NTC behavior in ethane oxidation. Even at the high-pressure conditions of the present work where the C2H5 + O2 reaction yields ethylperoxyl rather than C2H4 + HO2...

  3. Techniques in high pressure neutron scattering

    CERN Document Server

    Klotz, Stefan

    2013-01-01

    Drawing on the author's practical work from the last 20 years, Techniques in High Pressure Neutron Scattering is one of the first books to gather recent methods that allow neutron scattering well beyond 10 GPa. The author shows how neutron scattering has to be adapted to the pressure range and type of measurement.Suitable for both newcomers and experienced high pressure scientists and engineers, the book describes various solutions spanning two to three orders of magnitude in pressure that have emerged in the past three decades. Many engineering concepts are illustrated through examples of rea

  4. High Pressure Scanning Tunneling Microscopy and High PressureX-ray Photoemission Spectroscopy Studies of Adsorbate Structure,Composition and Mobility during Catalytic Reactions on A Model SingleCrystal

    Energy Technology Data Exchange (ETDEWEB)

    Montano, Max O. [Univ. of California, Berkeley, CA (United States)

    2006-01-01

    Our research focuses on taking advantage of the ability of scanning tunneling microscopy (STM) to operate at high-temperatures and high-pressures while still providing real-time atomic resolution images. We also utilize high-pressure x-ray photoelectron spectroscopy (HPXPS) to monitor systems under identical conditions thus giving us chemical information to compare and contrast with the structural and dynamic data provided by STM.

  5. High Speed Switching Micoplasma in High Pressure Gases

    Science.gov (United States)

    Wakim, Dani; Staack, David

    2012-10-01

    Micro-plasma discharges with switching times approaching 1 ns are studied at pressures from 1 to 16 atm. Applications of these devices are robust high speed switching transistors able to withstand electric interference, high temperatures and harsh environments. Measured discharge conditions at 250 psia in Nitrogen are: gas temperature 2900 K, discharge diameter ˜7 μm and electron density ˜10^17 cm-3. High speed switching is achieved by taking advantage of rapid dynamics of instabilities at high pressure and high electron density. The capacitance and inductance of the circuit also significantly affect transients. Tradeoffs are observed in switching times. By reducing capacitances from 10 pF to ˜1pF attainment of steady state conditions can be reduced from 1 us to ˜ 20 ns. However current rise times increase from 1 ns at high capacitance to 20 ns at low capacitance. A decrease in switching time with increased pressure is also observed. Also investigated are configurations with a third electrode acting as a gate or trigger and various high temperature (>2000K) materials such as platinum rhodium alloys and ceria stabilized zirconia ceramics for device fabrication.

  6. Is high-pressure water the cradle of life?

    Energy Technology Data Exchange (ETDEWEB)

    Bassez, Marie-Paule [Universite de Strasbourg-3, Departement Chimie, 72 route du Rhin, 67400 Illkirch (France)

    2003-06-25

    Several theories have been proposed for the synthesis of prebiotic molecules. This letter shows that the structure of supercritical water, or high-pressure water, could trigger prebiotic synthesis and the origin of life deep in the oceans, in hydrothermal vent systems. Dimer geometries of high-pressure water may have a point of symmetry and a zero dipole moment. Consequently, simple apolar molecules found in submarine hydrothermal vent systems will dissolve in the apolar environment provided by the apolar form of the water dimer. Apolar water could be the medium which helps precursor molecules to concentrate and react more efficiently. The formation of prebiotic molecules could thus be linked to the structure of the water inside chimney nanochannels and cavities where hydrothermal piezochemistry and shock wave chemistry could occur. (letter to the editor)

  7. High Pressure Inactivation of HAV within Mussels

    Science.gov (United States)

    The potential of hepatitis A virus (HAV) to be inactivated within Mediterranean mussels (Mytilus galloprovincialis) and blue mussels (Mytilus edulis) by high pressure processing was evaluated. HAV was bioaccumulated within mussels to approximately 6-log10 PFU by exposure of mussels to HAV-contamina...

  8. High pressure and synchrotron radiation satellite workshop

    Energy Technology Data Exchange (ETDEWEB)

    Bass, J.; Guignot, N.; Morard, G.; Mezouar, M.; Andrault, D.; Bolfan-Casanova, N.; Sturhahn, W.; Daniel, I.; Reynard, B.; Simionovici, A.; Sanchez Valle, C.; Martinez, I.; Kantor, I.; Dubrovinsky, I.; Mccammon, C.; Dubrovinskaia, N.; Kurnosiv, A.; Kuznetsov, A.; Goncharenko, I.; Loubeyre, P.; Desgreniers, S.; Weck, G.; Yoo, C.S.; Iota, V.; Park, J.; Cynn, H.; Gorelli, F.; Toulemonde, P.; Machon, D.; Merlen, A.; San Miguel, A.; Amboage, M.; Aquilanti, G.; Mathon, O.; Pascarelli, S.; Itie, J.P.; Mcmillan, P.F.; Trapananti, A.; Di Cicco, A.; Panfilis, S. de; Filipponi, A.; Kreisel, J.; Bouvier, P.; Dkhil, B.; Chaabane, B.; Rosner, H.; Koudela, D.; Schwarz, U.; Handestein, A.; Hanfland, M.; Opahle, I.; Koepernik, K.; Kuzmin, M.; Mueller, K.H.; Mydosh, J.; Richter, M.; Hejny, C.; Falconi, S.; Lundegaard, L.F.; Mcmahon, M.I; Loa, I.; Syassen, K.; Wang, X.; Roth, H.; Lorenz, T.; Farber Daniel, I.; Antonangeli Daniele, I.; Krisch, M.; Badro, J.; Fiquet, G.; Occelli, F.; Mao, W.L.; Mao, H.K.; Eng, P.; Kao, C.C.; Shu, J.F.; Hemley, R.J.; Tse, J.S.; Yao, Y.; Deen, P.P.; Paolasini, I.; Braithwaite, D.; Kernavanois, N.; Lapertot, G.; Rupprecht, K.; Leupold, O.; Ponkratz, U.; Wortmann, G.; Beraud, A.; Krisch, M.; Farber, D.; Antonangeli, D.; Aracne, C.; Zarestky, J.L.; Mcqueeney, R.; Mathon, O.; Baudelet, F.; Decremps, F.; Itie, J.P.; Nataf, I.; Pascarelli, S.; Polian, A

    2006-07-01

    The workshop is dedicated to recent advances on science at high pressure at third generation synchrotron sources. A variety of experiments using synchrotron radiation techniques including X-ray diffraction, EXAFS (extended X-ray absorption fine structure), inelastic X-ray scattering, Compton scattering and Moessbauer spectroscopy of crystalline, liquid or amorphous samples, are reported. This document gathers the abstracts of the presentations.

  9. Modeling of time-resolved laser-induced incandescence transients for particle sizing in high-pressure spray combustion environments : a comparative study

    NARCIS (Netherlands)

    Dreier, T.; Bougie, B.; Dam, N.J.; Gerber, T.

    2006-01-01

    In this study experimental single-pulse, time-resolved laser-induced incandescence (TIRE-LII) signal intensity profiles acquired during transient Diesel combustion events at high pressure were processed. Experiments were performed between 0.6 and 7 MPa using a high-temperature high-pressure constant

  10. Advanced Diagnostics for High Pressure Spray Combustion.

    Energy Technology Data Exchange (ETDEWEB)

    Skeen, Scott A.; Manin, Julien Luc; Pickett, Lyle M.

    2014-06-01

    The development of accurate predictive engine simulations requires experimental data to both inform and validate the models, but very limited information is presently available about the chemical structure of high pressure spray flames under engine- relevant conditions. Probing such flames for chemical information using non- intrusive optical methods or intrusive sampling techniques, however, is challenging because of the physical and optical harshness of the environment. This work details two new diagnostics that have been developed and deployed to obtain quantitative species concentrations and soot volume fractions from a high-pressure combusting spray. A high-speed, high-pressure sampling system was developed to extract gaseous species (including soot precursor species) from within the flame for offline analysis by time-of-flight mass spectrometry. A high-speed multi-wavelength optical extinction diagnostic was also developed to quantify transient and quasi-steady soot processes. High-pressure sampling and offline characterization of gas-phase species formed following the pre-burn event was accomplished as well as characterization of gas-phase species present in the lift-off region of a high-pressure n-dodecane spray flame. For the initial samples discussed in this work several species were identified, including polycyclic aromatic hydrocarbons (PAH); however, quantitative mole fractions were not determined. Nevertheless, the diagnostic developed here does have this capability. Quantitative, time-resolved measurements of soot extinction were also accomplished and the novel use of multiple incident wavelengths proved valuable toward characterizing changes in soot optical properties within different regions of the spray flame.

  11. Elasticity of orthoenstatite at high-pressure

    Science.gov (United States)

    Zhang, D.; Jackson, J. M.; Chen, B.; Zhao, J.; Yan, J.

    2011-12-01

    Orthoenstatite is an abundant yet complex mineral in Earth's upper mantle. Despite its abundance, the properties of orthopyroxene at high pressure remain ambiguous (e.g., Zhang et al. 2011; Jahn 2008; Kung et al. 2004). We explored select properties of a synthetic powdered orthoenstatite (Mg0.8757Fe0.13)2Si2O6 sample by X-ray diffraction (XRD) and nuclear resonance inelastic X-ray scattering (NRIXS) as a function of pressure in a neon pressure medium at 300 K. The XRD measurements were carried out at beamline 12.2.2 of the Advanced Light Source (Berkeley, CA), and the sample was studied up to 34 GPa. NRIXS measurements were carried out at sector 3ID-B of the Advanced Photon Source (Chicago, IL) in the pressure range of 3 to 17 GPa. From the raw NRIXS data, the partial phonon density of states (DOS) was derived (e.g., Sturhahn 2004). The volume (or pressure) dependence of several properties, such as the Lamb-Mössbauer factor, mean force constant, specific heat, vibrational entropy, and vibrational kinetic energy were determined from the DOS. We will discuss our results from these combined studies and the implications for Earth's upper mantle. References Zhang, D., J.M. Jackson, W. Sturhahn, and Y. Xiao (2011): Local structure variations observed in orthoenstatite at high-pressures. American Mineralogist, in press. Jahn, S. (2008) High-pressure phase transitions in MgSiO3 orthoenstatite studied by atomistic computer simulation. American Mineralogist, 93(4), 528-532. Kung, J., Li, B., Uchida, T., Wang, Y., Neuville, D., and Liebermann, R. (2004) In situ measurements of sound velocities and densities across the orthopyroxene high-pressure clinopyroxene transition in MgSiO3 at high pressure. Physics of the Earth and Planetary Interiors, 147(1), 27-44. Sturhahn, W. (2004): Nuclear Resonant Spectroscopy. J. Phys. Condens. Matter, 16, S497-S530.

  12. High Temperature Superconductor Accelerator Magnets

    CERN Document Server

    AUTHOR|(CDS)2079328; de Rijk, Gijs; Dhalle, Marc

    2016-11-10

    For future particle accelerators bending dipoles are considered with magnetic fields exceeding $20T$. This can only be achieved using high temperature superconductors (HTS). These exhibit different properties from classical low temperature superconductors and still require significant research and development before they can be applied in a practical accelerator magnet. In order to study HTS in detail, a five tesla demonstrator magnet named Feather-M2 is designed and constructed. The magnet is based on ReBCO coated conductor, which is assembled into a $10kA$ class Roebel cable. A new and optimized Aligned Block layout is used, which takes advantage of the anisotropy of the conductor. This is achieved by providing local alignment of the Roebel cable in the coil windings with the magnetic field lines. A new Network Model capable of analyzing transient electro-magnetic and thermal phenomena in coated conductor cables and coils is developed. This model is necessary to solve critical issues in coated conductor ac...

  13. High Temperature Superconducting Underground Cable

    Energy Technology Data Exchange (ETDEWEB)

    Farrell, Roger, A.

    2010-02-28

    The purpose of this Project was to design, build, install and demonstrate the technical feasibility of an underground high temperature superconducting (HTS) power cable installed between two utility substations. In the first phase two HTS cables, 320 m and 30 m in length, were constructed using 1st generation BSCCO wire. The two 34.5 kV, 800 Arms, 48 MVA sections were connected together using a superconducting joint in an underground vault. In the second phase the 30 m BSCCO cable was replaced by one constructed with 2nd generation YBCO wire. 2nd generation wire is needed for commercialization because of inherent cost and performance benefits. Primary objectives of the Project were to build and operate an HTS cable system which demonstrates significant progress towards commercial progress and addresses real world utility concerns such as installation, maintenance, reliability and compatibility with the existing grid. Four key technical areas addressed were the HTS cable and terminations (where the cable connects to the grid), cryogenic refrigeration system, underground cable-to-cable joint (needed for replacement of cable sections) and cost-effective 2nd generation HTS wire. This was the world’s first installation and operation of an HTS cable underground, between two utility substations as well as the first to demonstrate a cable-to-cable joint, remote monitoring system and 2nd generation HTS.

  14. High-temperature thermocouples and related methods

    Science.gov (United States)

    Rempe, Joy L.; Knudson, Darrell L.; Condie, Keith G.; Wilkins, S. Curt

    2011-01-18

    A high-temperature thermocouple and methods for fabricating a thermocouple capable of long-term operation in high-temperature, hostile environments without significant signal degradation or shortened thermocouple lifetime due to heat induced brittleness.

  15. Apparatus and method for removing particulate deposits from high temperature filters

    Science.gov (United States)

    Nakaishi, Curtis V.; Holcombe, Norman T.; Micheli, Paul L.

    1992-01-01

    A combustion of a fuel-air mixture is used to provide a high-temperature and high-pressure pulse of gaseous combustion products for the back-flush cleaning of ceramic filter elements contained in a barrier filter system and utilized to separate particulates from particulate-laden process gases at high temperature and high pressure. The volume of gaseous combustion products provided by the combustion of the fuel-air mixture is preferably divided into a plurality of streams each passing through a sonic orifice and conveyed to the open end of each filter element as a high pressure pulse which passes through the filter elements and dislodges dust cake supported on a surface of the filter element.

  16. High temperature power electronics for space

    Science.gov (United States)

    Hammoud, Ahmad N.; Baumann, Eric D.; Myers, Ira T.; Overton, Eric

    1991-01-01

    A high temperature electronics program at NASA Lewis Research Center focuses on dielectric and insulating materials research, development and testing of high temperature power components, and integration of the developed components and devices into a demonstrable 200 C power system, such as inverter. An overview of the program and a description of the in-house high temperature facilities along with experimental data obtained on high temperature materials are presented.

  17. Creep resistant high temperature martensitic steel

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

    2017-01-31

    The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, copper, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

  18. Creep resistant high temperature martensitic steel

    Energy Technology Data Exchange (ETDEWEB)

    Hawk, Jeffrey A.; Jablonski, Paul D.; Cowen, Christopher J.

    2015-11-13

    The disclosure provides a creep resistant alloy having an overall composition comprised of iron, chromium, molybdenum, carbon, manganese, silicon, nickel, vanadium, niobium, nitrogen, tungsten, cobalt, tantalum, boron, and potentially additional elements. In an embodiment, the creep resistant alloy has a molybdenum equivalent Mo(eq) from 1.475 to 1.700 wt. % and a quantity (C+N) from 0.145 to 0.205. The overall composition ameliorates sources of microstructural instability such as coarsening of M.sub.23C.sub.6 carbides and MX precipitates, and mitigates or eliminates Laves and Z-phase formation. A creep resistant martensitic steel may be fabricated by preparing a melt comprised of the overall composition followed by at least austenizing and tempering. The creep resistant alloy exhibits improved high-temperature creep strength in the temperature environment of around 650.degree. C.

  19. Elasticity of hcp cobalt at high pressure and temperature: a quasi-harmonic case

    Energy Technology Data Exchange (ETDEWEB)

    Antonangeli, D; Krisch, M; Farber, D L; Ruddle, D G; Fiquet, G

    2007-11-30

    We performed high-resolution inelastic x-ray scattering measurements on a single crystal of hcp cobalt at simultaneous high pressure and high temperature, deriving 4 of the 5 independent elements of the elastic tensor. Our experiments indicate that the elasticity of hcp-Co is well described within the frame of a quasi-harmonic approximation and that anharmonic high-temperature effects on the elastic moduli, sound velocities and elastic anisotropy are minimal at constant density. These results support the validity of the Birch's law and represent an important benchmark for ab initio thermal lattice dynamics and molecular-dynamics simulations.

  20. High Temperature Chemistry at NASA: Hot Topics

    Science.gov (United States)

    Jacobson, Nathan S.

    2014-01-01

    High Temperature issues in aircraft engines Hot section: Ni and Co based Superalloys Oxidation and Corrosion (Durability) at high temperatures. Thermal protection system (TPS) and RCC (Reinforced Carbon-Carbon) on the Space Shuttle Orbiter. High temperatures in other worlds: Planets close to their stars.

  1. Superconducting and normal state properties of heavily hole-doped diamond synthesized at high pressure

    Directory of Open Access Journals (Sweden)

    V.A. Sidorov, E.A. Ekimov, A.V. Rakhmanina, S.M. Stishov, E.D. Bauer and J.D. Thompson

    2006-01-01

    Full Text Available Diamonds, synthesized at high pressures and high temperatures in the presence of boron, are heavily hole-doped by incorporation of boron into the diamond lattice. These diamonds become superconducting below Tc=2–9 K. Synthesis in the systems B-C and B4C-C at P=9 GPa and T=2500–2800 K result in formation of polycrystalline carbonado-like material, whereas synthesis from B-C-H gives small single crystals and intergrowth plates. Dense superconducting bodies can be prepared by compacting these single crystal particles at P=8 GPa and T=1800 K. Specific heat and resistivity measurements in magnetic fields prove the bulk nature of superconductivity in all pressure-synthesized samples and provide a consistent set of materials parameters that favor a conventional weak-coupling electron–phonon interpretation of the superconducting mechanism at high hole doping. Schottky barrier tunneling conductance spectra, obtained with contacts fabricated at the surface of these hole-doped diamonds, indicate the appearance of superconducting gap below Tc.

  2. Topochemical 3D polymerization of C60 under high pressure at elevated temperatures.

    Science.gov (United States)

    Yamanaka, Shoji; Kini, Nagesh S; Kubo, Akira; Jida, Saeko; Kuramoto, Hideaki

    2008-04-02

    Fullerene C60 monomer crystals were compressed to a face-centered cubic (fcc) phase with a lattice parameter of a = 11.93(5) A and a micro-Vickers hardness of 4500 kg/mm2 using high-pressure and high-temperature conditions of 15 GPa at 500-600 degrees C. The hardness is compatible with that of cubic boron nitride (c-BN), suggesting the formation of a 3D C60 polymer. The single-crystal X-ray structural analysis revealed that each C60 molecule in the polymer was linked to the 12 nearest neighbors by [2+2] cycloaddition between the common pentagon-hexagon (56) edges. However, ab initio geometry optimization and molecular dynamics calculations suggested that the 3D polymer should have a rhombohedral structure with the space group of R containing [3+3] cycloaddition between the pentagons of C60 molecules within the plane perpendicular to the 3-fold axis. The higher apparent symmetry of fcc was observed as an averaged structure of different orientations of the rhombohedral structure. The R structure can be derived by only a slight rotation of each C60 unit in the (111) plane of the fcc structure. The band-structure calculation suggested that the 3D polymer (R) was a semiconductor; the activation energy for the electrical conductivity was experimentally determined to be 0.25 eV at 550 K.

  3. Creating Binary Cu–Bi Compounds via High-Pressure Synthesis: A Combined Experimental and Theoretical Study

    Energy Technology Data Exchange (ETDEWEB)

    Clarke, Samantha M.; Amsler, Maximilian; Walsh, James P.S.; Yu, Tony; Wang, Yanbin; Meng, Yue; Jacobsen, Steven D.; Wolverton, Chris; Freedman, Danna E. (UC); (CIW); (NWU)

    2017-06-13

    Exploration beyond the known phase space of thermodynamically stable compounds into the realm of metastable materials is a frontier of materials chemistry. The application of high pressure in experiment and theory provides a powerful vector by which to explore this uncharted phase space, allowing discovery of complex new structures and bonding in the solid state. We harnessed this approach for the Cu–Bi system, where the realization of new phases offers potential for exotic properties such as superconductivity. This potential is due to the presence of bismuth, which, by virtue of its status as one of the heaviest stable elements, forms a critical component in emergent materials such as superconductors and topological insulators. To fully investigate and understand the Cu–Bi system, we welded theoretical predictions with experiment to probe the Cu–Bi system under high pressures. By employing the powerful approach of in situ X-ray diffraction in a laser-heated diamond anvil cell (LHDAC), we thoroughly explored the high-pressure and high-temperature (high-PT) phase space to gain insight into the formation of intermetallic compounds at these conditions. We employed density functional theory (DFT) calculations to calculate a pressure versus temperature phase diagram, which correctly predicts that CuBi is stabilized at lower pressures than Cu11Bi7, and allows us to uncover the thermodynamic contributions responsible for the stability of each phase. Detailed comparisons between the NiAs structure type and the two high-pressure Cu–Bi phases, Cu11Bi7 and CuBi, reveal the preference for elemental segregation within the Cu–Bi phases, and highlight the unique channels and layers formed by ordered Cu vacancies. The electron localization function from DFT calculations account for the presence of these “voids” as a manifestation of the lone pair orientation on the Bi atoms. Our study demonstrates the power of joint experimental–computational work in exploring the

  4. Study of high temperature phase of sulphoaluminate for desulfuration

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, J.; Yang, T.; Cheng, J.; Cao, X.; Cen, K. [Zhejiang University, Hangzhou (China). National Key Lab of MOE Clean Energy and Environment Engineering

    2003-06-01

    This paper has studied systematically the formation mechanism of the high temperature stable phase of sulphoaluminate. The effect on high temperature sulfur fixation by factors such as the combustion temperature, retention period, the mixing ratio of the compound and additives was systematically investigated and the formation mechanism was analysed. The experimental results indicate that the largest amount of sulphoaluminate was produced at a temperature of 1300{sup o}C and with a mixing ratio of 3:3:1. 6 refs., 7 figs.

  5. High-pressure oxidation of methane

    DEFF Research Database (Denmark)

    Hashemi, Hamid; Christensen, Jakob Munkholt; Gersen, Sander

    2016-01-01

    Methane oxidation at high pressures and intermediate temperatures was investigated in a laminar flow reactor and in a rapid compression machine (RCM). The flow-reactor experiments were conducted at 700–900 K and 100 bar for fuel-air equivalence ratios (Φ) ranging from 0.06 to 19.7, all highly...... diluted in nitrogen. It was found that under the investigated conditions, the onset temperature for methane oxidation ranged from 723 K under reducing conditions to 750 K under stoichiometric and oxidizing conditions. The RCM experiments were carried out at pressures of 15–80 bar and temperatures of 800......–1250 K under stoichiometric and fuel-lean (Φ=0.5) conditions. Ignition delays, in the range of 1–100 ms, decreased monotonically with increasing pressure and temperature. A chemical kinetic model for high-pressure methane oxidation was established, with particular emphasis on the peroxide chemistry...

  6. Inspection technology for high pressure pipes

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Jae H.; Lee, Jae C.; Eum, Heung S.; Choi, Yu R.; Moon, Soon S.; Jang, Jong H

    2000-02-01

    Various kinds of defects are likely to be occurred in the welds of high pressure pipes in nuclear power plants. Considering the recent accident of Zuruga nuclear power plant in Japan, reasonable policy is strongly requested for the high pressure pipe integrity. In this study, we developed the technologies to inspect pipe welds automatically. After development of scanning robot prototype in the first research year, we developed and implemented the algorithm of automatic tracking of the scanning robot along the weld line of the pipes. We use laser slit beam on weld area and capture the image using digital camera. Through processing of the captures image, we finally determine the weld line automatically. In addition, we investigated a new technology on micro systems for developing micro scanning robotic inspection of the pipe welds. The technology developed in this study is being transferred to the industry. (author)

  7. High pressure studies of potassium perchlorate

    Science.gov (United States)

    Pravica, Michael; Wang, Yonggang; Sneed, Daniel; Reiser, Sharissa; White, Melanie

    2016-09-01

    Two experiments are reported on KClO4 at extreme conditions. A static high pressure Raman study was first conducted to 18.9 GPa. Evidence for at least two new phases was observed: one between 2.4 and 7.7 GPa (possibly sluggish), and the second near 11.7 GPa. Then, the X-ray induced decomposition rate of potassium perchlorate (KClO4 → hν KCl + 2O2) was studied up to 15.2 GPa. The time-dependent growth of KCl and O2 was monitored. The decomposition rate slowed at higher pressures. We present the first direct evidence for O2 crystallization at higher pressures, demonstrating that O2 molecules aggregate at high pressure.

  8. Metallicity of boron carbides at high pressure

    Science.gov (United States)

    Dekura, Haruhiko; Shirai, Koun; Yanase, Akira

    2010-03-01

    Electronic structure of semiconducting boron carbide at high pressure has been theoretically investigated, because of interests in the positive pressure dependence of resistivity, in the gap closure, and in the phase transition. The most simplest form B12(CCC) is assumed. Under assumptions of hydrostatic pressure and neglecting finite-temperature effects, boron carbide is quite stable at high pressure. The crystal of boron carbide is stable at least until a pressure higher than previous experiments showed. The gap closure occurs only after p=600 GPa on the assumption of the original crystal symmetry. In the low pressure regime, the pressure dependence of the energy gap almost diminishes, which is an exceptional case for semiconductors, which could be one of reasons for the positive pressure dependence of resistivity. A monotonous increase in the apex angle of rhombohedron suggests that the covalent bond continues to increase. The C chain inserted in the main diagonal of rhombohedral structure is the chief reason of this stability.

  9. High temperature vapors science and technology

    CERN Document Server

    Hastie, John

    2012-01-01

    High Temperature Vapors: Science and Technology focuses on the relationship of the basic science of high-temperature vapors to some areas of discernible practical importance in modern science and technology. The major high-temperature problem areas selected for discussion include chemical vapor transport and deposition; the vapor phase aspects of corrosion, combustion, and energy systems; and extraterrestrial high-temperature species. This book is comprised of seven chapters and begins with an introduction to the nature of the high-temperature vapor state, the scope and literature of high-temp

  10. High-pressure investigations of Earth's interior

    Science.gov (United States)

    Jackson, Jennifer

    2007-03-01

    In the first half of the talk, the electronic structure of iron in ferromagnesium silicate perovskite will be discussed. Knowledge of iron valences and spin states in silicate perovskite is relevant to our understanding of the physical and chemical properties of Earth's lower mantle such as transport properties, mechanical behavior, and element partitioning. In this study, we have measured the electronic structure of the iron component of an aluminous Fe-bearing silicate perovskite sample, (Mg0.88Fe0.09)(Si0.94Al0.10)O3, close to a pyrolite composition, using synchrotron M"ossbauer spectroscopy (SMS) and laser heated diamond anvil cells at high-pressure and temperatures at beamline 3-ID of the Advanced Photon Source. Evaluation of the spectra provided the isomer shift and the quadrupole splitting of the iron component in silicate perovskite, which gives information on valence and spin states under lower mantle conditions. In the second half of the talk, experiments on the melting curve of iron at high-pressures will be presented. Seismological observations indicate that Earth's iron-dominated core consists of a solid inner region surrounded by a liquid outer core. Previously, melting studies of iron metal at high-pressures and temperatures were performed by shock-compression, resistive- and laser-heating in diamond anvil cells using visual observations or synchrotron x-ray diffraction and theoretical methods. However, the melting curve of iron is still controversial. Here, we will present a new method of detecting the solid-liquid phase boundary of iron at high-pressure using ^57Fe SMS. The characteristic SMS time signature is observed by fast detectors and vanishes suddenly when melting occurs. This process is described by the Lamb-M"ossbauer factor f = exp(-k^2), where k is the wave number of the resonant x-rays and is the mean-square displacement of the iron atoms.

  11. Modeling High Pressure Micro Hollow Cathode Discharges

    Science.gov (United States)

    2007-11-02

    cathode discharge excimer lamps , Phys. Plasmas 7, 286 (2000). [3] RH Stark and KH Schoenbach, Direct high pressure glow discharges, J. Appl. Phys...temperature profiles in argon glow discharges, J. Appl. Phys. 88, 2234 (2000) [8] M. Moselhy, W. Shi, R. Stark, A flat glow discharge excimer radiation...MHCD acts as a plasma cathode for a third electrode (anode). Some experimental results in this geometry are available for argon and for air from the

  12. High Pressure Multicomponent Adsorption in Porous Media

    DEFF Research Database (Denmark)

    Shapiro, Alexander; Stenby, Erling Halfdan

    1999-01-01

    We analyse adsorption of a multicomponent mixture at high pressure on the basis of the potential theory of adsorption. The adsorbate is considered as a segregated mixture in the external field produced by a solid adsorbent. we derive an analytical equation for the thickness of a multicomponent film...... close to a dew point. This equation (asymptotic adsorption equation, AAE) is a first order approximation with regard to the distance from a phase envelope....

  13. High pressure effects on allergen food proteins.

    Science.gov (United States)

    Somkuti, Judit; Smeller, László

    2013-12-15

    There are several proteins, which can cause allergic reaction if they are inhaled or ingested. Our everyday food can also contain such proteins. Food allergy is an IgE-mediated immune disorder, a growing health problem of great public concern. High pressure is known to affect the structure of proteins; typically few hundred MPa pressure can lead to denaturation. That is why several trials have been performed to alter the structure of the allergen proteins by high pressure, in order to reduce its allergenicity. Studies have been performed both on simple protein solutions and on complex food systems. Here we review those allergens which have been investigated under or after high pressure treatment by methods capable of detecting changes in the secondary and tertiary structure of the proteins. We focus on those allergenic proteins, whose structural changes were investigated by spectroscopic methods under pressure in correlation with the observed allergenicity (IgE binding) changes. According to this criterion we selected the following allergen proteins: Mal d 1 and Mal d 3 (apple), Bos d 5 (milk), Dau c 1 (carrot), Gal d 2 (egg), Ara h 2 and Ara h 6 (peanut), and Gad m 1 (cod).

  14. Introduction to High-Pressure Science

    Science.gov (United States)

    Dera, Przemyslaw

    To a common person pressure is just one of the parameters that describe a thermodynamic state. We all hear about it in everyday weather forecasts, and most of us do not associate it with anything particularly unique. Probably the most intuitive idea of the effect of high-pressure comes from movies, where submarine sinking to the bottom of the ocean is gradually crushed by the surrounding water, until its hull implodes. Why, then hundreds of scientists throughout the world spent their lifelong careers studying high-pressure phenomena? Despite all the developments in experimental technologies and instrumentation, modern scientist has very few tools that allow him or her to "grab" two atoms and bring them, in a very controllable way, closer together. Being able to achieve this task means the ability to directly probe interatomic interaction potentials and can cause transformations as dramatic as turning of a common gas into solid metal. Before the reader delves into more advanced topics described later in this book, this introductory chapter aims to explain several elementary, but extremely important concepts in high-pressure science. We will start with a brief discussion of laboratory devices used to produce pressure, address the issue of hydrostaticity, elastic and plastic compression, and will conclude with a short discussion of unique effects of anisotropic stress.

  15. Thermodynamics of High Temperature Plasmas

    Directory of Open Access Journals (Sweden)

    Ettore Minardi

    2009-03-01

    Full Text Available In this work we discuss how and to what extent the thermodynamic concepts and the thermodynamic formalism can be extended to the description of high temperature states of the plasma not necessarily associated with a Boltzmann distribution and with thermal equilibrium.The discussion is based on the “magnetic or electrostatic entropy concept”, an interpretative and predictive tool based on probability and information, defined in a suitably coarse-grained possibility space of all current density or of all electric charge density distributions under testable constraints, and whose variation properties are proven to be related under certain conditions to the equilibrium and the stability of the system. In the case of magnetic equilibrium the potentiality of the magnetic entropy concept is illustrated by comparing the predictions of the current density and pressure profiles with the observations in different tokamak machines and different tokamak regimes, as well as by showing how the equilibrium and the stability in devices as different as the reversed field pinch or the magnetic well are described by the variation properties of the same entropy functional applied to the different situations. In fact it emerges that the maximum of the entropy can be seen in these different cases as an optimization constraint for the minimum of the magnetic energy. The application of the entropy concept to the electrostatic processes shows in particular that the so-called reactive instabilities (non-dissipative, non-resonant instabilities with a marginal point admit a neighboring state with higher entropy and are therefore of special relevance from the point of view of the physical evolution of the system. In this case the thermodynamic formalism allows the introduction of the concept of “thermodynamic fluctuations” of the macroscopic charge density and provides a method for the calculation of the “thermodynamic” fluctuation levels both on the stable as

  16. Isothermal bulk modulus and its first pressure derivative of NaC1 at high pressure and high temperature

    Institute of Scientific and Technical Information of China (English)

    Song Ting; Sun Xiao-Wei; Liu Zi-Jiang; Li Ji1an-Feng; Tian Jun-Hong

    2012-01-01

    The isothermal bulk modulus and its first pressure derivative of NaCl are investigated using the classical molecular dynamics method and the quasi-harmonic Debye model.To ensure faithful molecular dynamics simulations,two types of potentials,the shell-model (SM) potential and the two-body rigid-ion Born-Mayer-Huggins-Fumi-Tosi (BMHFT)potential,are fully tested.Compared with the SM potential based simulation,the molecular dynamics simulation with the BMHFT potential is very successful in reproducing accurately the measured bulk modulus of NaC1. Particular attention is paid to the prediction of the isothermal bulk modulus and its first pressure derivative using the reliable potential and to the comparison of the SM and the BMHFT potentials based molecular dynamics simulations with the quasi-harmonic Debye model.The properties of NaCl in the pressure range of 0-30 GPa at temperatures up to the melting temperature of 1050 K are investigated.

  17. Three-Dimensional Measurements of Fuel Distribution in High-Pressure, High- Temperature, Next-Generation Aviation Gas Turbine Combustors

    Science.gov (United States)

    Hicks, Yolanda R.; Locke, Randy J.; Anderson, Robert C.; Zaller, Michelle M.

    1998-01-01

    In our world-class, optically accessible combustion facility at the NASA Lewis Research Center, we have developed the unique capability of making three-dimensional fuel distribution measurements of aviation gas turbine fuel injectors at actual operating conditions. These measurements are made in situ at the actual operating temperatures and pressures using the JP-grade fuels of candidate next-generation advanced aircraft engines for the High Speed Research (HSR) and Advanced Subsonics Technology (AST) programs. The inlet temperature and pressure ranges used thus far are 300 to 1100 F and 80 to 250 psia. With these data, we can obtain the injector spray angles, the fuel mass distributions of liquid and vapor, the degree of fuel vaporization, and the degree to which fuel has been consumed. The data have been used to diagnose the performance of injectors designed both in-house and by major U.S. engine manufacturers and to design new fuel injectors with overall engine performance goals of increased efficiency and reduced environmental impact. Mie scattering is used to visualize the liquid fuel, and laser-induced fluorescence is used to visualize both liquid and fuel vapor.

  18. Ab initio study of the structural, elastic, and thermodynamic properties of tungsten monocarbide at high pressure and high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Lei, E-mail: leoleu.hp@gmail.com [National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, CAEP, P.O. Box 919-102, Mianyang, Sichuan 621900 (China); Bi, Yan, E-mail: biyan_cn@yahoo.com.cn [National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, CAEP, P.O. Box 919-102, Mianyang, Sichuan 621900 (China); Xu, Jian [National Key Laboratory of Shock Wave and Detonation Physics, Institute of Fluid Physics, CAEP, P.O. Box 919-102, Mianyang, Sichuan 621900 (China); Chen, Xiangrong [School of Physical Science and Technology, Sichuan University, Chengdu 610064 (China)

    2013-03-15

    Tungsten monocarbide (WC) exhibits unique physical and chemical properties. It is an indispensable industrial material used as cutting tools and has many potential applications in catalyst, energy storage, and so on. We performed calculations of the electronic structure in the framework of the density functional theory (DFT) with generalized gradient approximation (GGA) to investigate structural and elastic properties of WC. Bulk WC is very incompressible, but its bulk modulus is still smaller than diamond though Lin et al. reported that nano-crystalline WC was as incompressible as diamond. WC undergoes different compressibilities along a and c directions: the a-axis is more compressible than the c-axis. The ratio of shear modulus to bulk modulus (G/B) was studied and it was found that WC translated from the brittle to ductile state at ∼63 GPa. In order to compare with the EOS determined at finite temperature, the vibration effects of the crystal lattice are taken into account based on quasi-harmonic Debye model. The temperature effect on bulk modulus is discussed and the thermodynamic properties of WC, such as heat capacity C{sub V}, Debye temperature θ{sub D}, and thermal expansion α, are calculated simultaneously.

  19. Macroscopic Expressions of Molecular Adiabatic Compressibility of Methyl and Ethyl Caprate under High Pressure and High Temperature

    Directory of Open Access Journals (Sweden)

    Fuxi Shi

    2014-01-01

    Full Text Available The molecular compressibility, which is a macroscopic quantity to reveal the microcompressibility by additivity of molecular constitutions, is considered as a fixed value for specific organic liquids. In this study, we introduced two calculated expressions of molecular adiabatic compressibility to demonstrate its pressure and temperature dependency. The first one was developed from Wada’s constant expression based on experimental data of density and sound velocity. Secondly, by introducing the 2D fitting expressions and their partial derivative of pressure and temperature, molecular compressibility dependency was analyzed further, and a 3D fitting expression was obtained from the calculated data of the first one. The third was derived with introducing the pressure and temperature correction factors based on analogy to Lennard-Jones potential function and energy equipartition theorem. In wide range of temperatures (293

  20. Experiments on Performance Sensitivity of SMART PRHRS using the High Temperature/High Pressure Thermal-Hydraulic Test Facility (VISTA)

    Energy Technology Data Exchange (ETDEWEB)

    Park, Hyun Sik; Choi, Ki Yong; Cho, Seok; Lee, Sung Jae; Choi, Nam Hyun; Min, Kyong Ho; Song, Chul Hwa; Park, Chun Kyong; Chung, Moon Ki

    2005-07-15

    The VISTA (Experimental Verification by Integral Simulation of Transients and Accidents) is an experimental facility to verify the performance and safety issues of the SMART-P (Pilot plant of the System-integrated Modular Advanced Reactor). The basic design of the SMART-P has been completed by KAERI. The present report describes the experimental results on the overall performance sensitivity of SMART PRHRS. During the reference test a stable flow occurs in a natural circulation loop which is composed of a steam generator secondary side, a secondary system, and a PRHRS, and it is ascertained by a repetition test. When the bypass valves of PRHRS are operated earlier than the isolation valves of secondary system, the primary system is effectively cooled but the inventory of PRHRS compensation tank is drained earlier. When the bypass valves of PRHRS are operated later than the isolation valves of secondary system, the primary system is not cooled. As the initial level of compensation tank is lowered to 16% of the full level, the steady natural circulation stops around 500 seconds. When the initial pressure of PRHRS is at 0.1 MPa, the natural circulation is not performed properly. When they are 2.5 and 3.5 MPa, it shows better performance than the reference test. Also when the isolation valve connecting the compensation tank is operated simultaneously with the PRHRS isolation valves, the primary system is more efficiently cooled but the inventory of PRHRS compensation tank is drained earlier.