Proton radiography of petawatt-driven channel formation in a plasma gradient

Science.gov (United States)

Hill, Matthew; Sircombe, Nathan; Ramsay, Martin; Brown, Colin; Hobbs, Lauren; Allan, Peter; James, Steven; Norreys, Peter; Ratan, Naren; Ceurvorst, Luke

2015-11-01

Channel formation by ultra-intense laser pulses in underdense plasmas is a challenging simulation problem with direct relevance to many areas of current research. Recent experiments at the Orion laser facility have used high-energy proton radiography (>40 MeV) driven by a 1 ω petawatt beam to directly probe the interaction of another petawatt beam with a well-characterized plasma density gradient. The interaction plasma was generated using a 3 ω long-pulse beam and diagnosed using a 2 ω optical probe, simultaneously imaged onto four gated optical imagers and two streak cameras. The unique capabilities of the Orion facility allowed a comparison of the channels generated by intense 1 ω (1 μm, 100-500 J, 0.6 ps, 1021 W/cm2, f/3 parabola) and 2 ω (0.5 μm, 100 J, 0.6 ps, 1020 W/cm2, f/6 parabola) pulses. Proton radiographs of these channels are presented along with PIC simulations performed using the EPOCH code, supported by K- α measurements of hot electron beam divergence and magnetic spectrometer data. Together these provide a solid foundation for improvements to hydrodynamic and PIC simulations, further developing the predictive capabilities required to optimize future experiments.

High-order dispersion control of 10-petawatt Ti:sapphire laser facility.

Science.gov (United States)

Li, Shuai; Wang, Cheng; Liu, Yanqi; Xu, Yi; Li, Yanyan; Liu, Xingyan; Gan, Zebiao; Yu, Lianghong; Liang, Xiaoyan; Leng, Yuxin; Li, Ruxin

2017-07-24

A grism pair is utilized to control the high-order dispersion of the Shanghai Superintense Ultrafast Lasers Facility, which is a large-scale project aimed at delivering 10-PW laser pulses. We briefly present the characteristics of the laser system and calculate the cumulative B-integral, which determines the nonlinear phase shift influence on material dispersion. Three parameters are selected, grism separation, angle of incidence and slant distance of grating compressor, to determine their optimal values through an iterative searching procedure. Both the numerical and experimental results confirm that the spectral phase distortion is controlled, and the recompressed pulse with a duration of 24 fs is obtained in the single-shot mode. The distributions and stabilities of the pulse duration at different positions of the recompressed beam are also investigated. This approach offers a new feasible solution for the high-order dispersion compensation of femtosecond petawatt laser systems.

Petawatt laser system for fast ignitor studies at ILE, Osaka University

International Nuclear Information System (INIS)

Izawa, Y.; Kitagawa, Y.; Fujita, H.

2003-01-01

A petawatt laser system has been developed for the fast ignitor studies. Three new technologies were introduced; an optical parametric chirped pulse amplifier (OPCPA) in the front end for suppression of prepulse below 10 -8 the main pulse, a deformable mirror for correction of wave front distortion and the chirped pulse amplification in the GEKKO-XII. The system delivered successfully the output energy of 420 J in 470 fs on target, which corresponds to the focal intensity of more than 10 20 W/cm 2 . By using the PW laser, the heating experiments of the high density plasma imploded by GEKKO-XII started. (author)

Integrated laser-target interaction experiments on the RAL petawatt laser

International Nuclear Information System (INIS)

Patel, P K; Key, M H; Mackinnon, A J

2005-01-01

We review a recent experimental campaign to study the interaction physics of petawatt laser pulses incident at relativistic intensities on solid targets. The campaign was performed on the 500 J sub-picosecond petawatt laser at the Rutherford Appleton Laboratory. An extensive suite of optical, x-ray, and particle diagnostics was employed to characterise the processes of laser absorption, electron generation and transport, thermal and K-alpha x-ray generation, and proton acceleration

Integrated Laser-Target Interaction Experiments on the RAL Petawatt Laser

International Nuclear Information System (INIS)

Patel, P. K.; Key, M. H.; Mackinnon, A. J.; Akli, K.; Berry, R.; Borghesi, M.; Brummit, P. A.; Chambers, D.; Clarke, R. J.; Damian, C.; Chen, H.; Eagleton, R.; Freeman, R.; Glenzer, S.; Gregori, G.; Heathcote, R.; Izumi, N.; Kar, S.; King, J. A.; Kock, J.; Kuba, J.; May, M.; Moon, S.; Neely, D.; Neville, D. R.; Nikroo, A.; Niles, A.; Pasley, J.; Patel, N.; Park, H. S.; Romagnani, L.; Shepherd, R.; Snavely, R. A.; Stephens, R.; Stoeckl, C.; Storm, M.; Theobald, W.; Van Maren, R.; Wilks, S. C.; Zhang, B.

2005-01-01

We report on two recent experimental campaigns performed on the new Petawatt laser at the Rutherford Appleton Laboratory in the UK.The laser has recently demonstrated performance characteristics of 400 J of laser energy being delivered on target in a sub 400 fs pulse, reaching a peak focal intensity on the order of 10''21 W/cm''2. The experiments covered multiplic areas of investigation including hot electron transport in planar foil and cone focus geometries, relativistic laser-solid interactions proton beam focusing and heating, and high energy K-alpha production and radiography. A somewhat novel approach was taken to the experiments in that all of the diagnostics required for the different areas of study were fielded simultaneously and operated on all shots. Thus, we were able to obtain extensive sets of measurements on a single-shot basis which provides significant benefit to our understanding of the laser-target interaction conditions and plasma properties. (Author)

Petawatt pulsed-power accelerator

Science.gov (United States)

Stygar, William A.; Cuneo, Michael E.; Headley, Daniel I.; Ives, Harry C.; Ives, legal representative; Berry Cottrell; Leeper, Ramon J.; Mazarakis, Michael G.; Olson, Craig L.; Porter, John L.; Wagoner; Tim C.

2010-03-16

A petawatt pulsed-power accelerator can be driven by various types of electrical-pulse generators, including conventional Marx generators and linear-transformer drivers. The pulsed-power accelerator can be configured to drive an electrical load from one- or two-sides. Various types of loads can be driven; for example, the accelerator can be used to drive a high-current z-pinch load. When driven by slow-pulse generators (e.g., conventional Marx generators), the accelerator comprises an oil section comprising at least one pulse-generator level having a plurality of pulse generators; a water section comprising a pulse-forming circuit for each pulse generator and a level of monolithic triplate radial-transmission-line impedance transformers, that have variable impedance profiles, for each pulse-generator level; and a vacuum section comprising triplate magnetically insulated transmission lines that feed an electrical load. When driven by LTD generators or other fast-pulse generators, the need for the pulse-forming circuits in the water section can be eliminated.

X-ray emission from stainless steel foils irradiated by femtosecond petawatt laser pulses

Science.gov (United States)

Alkhimova, M. A.; Faenov, A. Ya; Pikuz, T. A.; Skobelev, I. Yu; Pikuz, S. A.; Nishiuchi, M.; Sakaki, H.; Pirozhkov, A. S.; Sagisaka, S.; Dover, N. P.; Kondo, Ko; Ogura, K.; Fukuda, Y.; Kiriyama, H.; Esirkepov, T.; Bulanov, S. V.; Andreev, A.; Kando, M.; Zhidkov, A.; Nishitani, K.; Miyahara, T.; Watanabe, Y.; Kodama, R.; Kondo, K.

2018-01-01

We report about nonlinear growth of x-ray emission intensity emitted from plasma generated by femtosecond petawatt laser pulses irradiating stainless steel foils. X-ray emission intensity increases as ˜ I 4.5 with laser intensity I on a target. High spectrally resolved x-ray emission from front and rear surfaces of 5 μm thickness stainless steel targets were obtained at the wavelength range 1.7-2.1 Å, for the first time in experiments at femtosecond petawatt laser facility J-KAREN-P. Total intensity of front x-ray spectra three times dominates to rear side spectra for maximum laser intensity I ≈ 3.2×1021 W/cm2. Growth of x-ray emission is mostly determined by contribution of bremsstrahlung radiation that allowed estimating bulk electron plasma temperature for various magnitude of laser intensity on target.

First results with the novel petawatt laser acceleration facility in Dresden

International Nuclear Information System (INIS)

Schramm, U; Bussmann, M; Irman, A; Siebold, M; Zeil, K; Albach, D; Bernert, C; Bock, S; Brack, F; Branco, J; Couperus, JP; Cowan, TE; Debus, A; Eisenmann, C; Garten, M; Gebhardt, R; Grams, S; Helbig, U; Huebl, A; Kluge, T

2017-01-01

We report on first commissioning results of the DRACO Petawatt ultra-short pulse laser system implemented at the ELBE center for high power radiation sources of Helmholtz-Zentrum Dresden-Rossendorf. Key parameters of the laser system essential for efficient and reproducible performance of plasma accelerators are presented and discussed with the demonstration of 40 MeV proton acceleration under TNSA conditions as well as peaked electron spectra with unprecedented bunch charge in the 0.5 nC range. (paper)

High Average Power, High Energy Short Pulse Fiber Laser System

Energy Technology Data Exchange (ETDEWEB)

Messerly, M J

2007-11-13

Recently continuous wave fiber laser systems with output powers in excess of 500W with good beam quality have been demonstrated [1]. High energy, ultrafast, chirped pulsed fiber laser systems have achieved record output energies of 1mJ [2]. However, these high-energy systems have not been scaled beyond a few watts of average output power. Fiber laser systems are attractive for many applications because they offer the promise of high efficiency, compact, robust systems that are turn key. Applications such as cutting, drilling and materials processing, front end systems for high energy pulsed lasers (such as petawatts) and laser based sources of high spatial coherence, high flux x-rays all require high energy short pulses and two of the three of these applications also require high average power. The challenge in creating a high energy chirped pulse fiber laser system is to find a way to scale the output energy while avoiding nonlinear effects and maintaining good beam quality in the amplifier fiber. To this end, our 3-year LDRD program sought to demonstrate a high energy, high average power fiber laser system. This work included exploring designs of large mode area optical fiber amplifiers for high energy systems as well as understanding the issues associated chirped pulse amplification in optical fiber amplifier systems.

High-Intensity Laser Diagnostics for OMEGA EP

International Nuclear Information System (INIS)

Bromage, J.; Zuegel, J.D.; Bahk, S.-W.; Vickery, D.S.; Waxer, L.J.; Irwin, D.; Bagnoud, V.; Boni, R.; Moore, M.D.; Junquist, R.; Stoeckl, C.

2006-01-01

OMEGA EP is a new high-energy petawatt laser system under construction at the University of Rochester's Laboratory for Laser Energetics. This paper describes our designs for two diagnostics critical to OMEGA EP's mission. The focal-spot diagnostic (FSD) is responsible for characterizing the focal spot of OMEGA EP's off-axis parabolic mirror at full energy. The ultrafast temporal diagnostic (UTD) is responsible for characterizing pulse shapes of full-energy target shots ranging in width from <1 to 100 ps as well as setting the desired pulse width before the shot. These diagnostics will enable, for the first time, complete spatial and temporal characterization of the focus of a high-energy petawatt laser at full energy

Progress in high-energy laser technology

International Nuclear Information System (INIS)

Miyanaga, Noriaki; Kitagawa, Yoneyoshi; Nakatsuka, Masahiro; Kanabe, Tadashi; Okuda, Isao

2005-01-01

The technological development of high-energy lasers is one of the key issues in laser fusion research. This paper reviews several technologies on the Nd:glass laser and KrF excimer laser that are being used in the current laser fusion experiments and related plasma experiments. Based on the GEKKO laser technology, a new high-energy Nd: glass laser system, which can deliver energy from 10 kJ (boad-band operation) to 20 kJ (narrow-band operation), is under construction. The key topics in KrF laser development are improved efficiency and repetitive operation, which aim at the development of a laser driven for fusion reactor. Ultra-intense-laser technology is also very important for fast ignition research. The key technology for obtaining the petawatt output with high beam quality is reviewed. Regarding the uniform laser irradiation required for high-density compression, the beam-smoothing methods on the GEKKO XII laser are reviewed. Finally, we discuss the present status of MJ-class lasers throughout the world, and summarize by presenting the feasibility of various applications of the high-energy lasers to a wide range of scientific and technological fields. (author)

High-intensity laser diagnostics for OMEGA EP

Energy Technology Data Exchange (ETDEWEB)

Bromage, J.; Zuegel, J.D.; Bahk, S.W.; Vickery, D.S.; Waxer, L.J.; Irwin, D.; Bagnoud, V.; Boni, R.; Moore, M.D.; Jungquist, R.; Stoeckl, C. [Rochester Univ., Lab. for Laser Energetics, NY (United States)

2006-06-15

OMEGA EP (Extended Performance) is a new high-energy peta-watt laser system under construction at the University of Rochester's Laboratory for Laser Energetics. This paper describes our designs for two diagnostics critical to OMEGA EP's mission. The focal-spot diagnostic (FSD) is responsible for characterizing the focal spot of OMEGA EP's off-axis parabolic mirror at full energy. The ultrafast temporal diagnostic (UTD) is responsible for characterizing pulse shapes of full-energy target shots ranging in width from < 1 to 100 ps as well as setting the desired pulse width before the shot. These diagnostics will enable, for the first time, complete spatial and temporal characterization of the focus of a high-energy peta-watt laser at full energy. (authors)

High-intensity laser diagnostics for OMEGA EP

International Nuclear Information System (INIS)

Bromage, J.; Zuegel, J.D.; Bahk, S.W.; Vickery, D.S.; Waxer, L.J.; Irwin, D.; Bagnoud, V.; Boni, R.; Moore, M.D.; Jungquist, R.; Stoeckl, C.

2006-01-01

OMEGA EP (Extended Performance) is a new high-energy peta-watt laser system under construction at the University of Rochester's Laboratory for Laser Energetics. This paper describes our designs for two diagnostics critical to OMEGA EP's mission. The focal-spot diagnostic (FSD) is responsible for characterizing the focal spot of OMEGA EP's off-axis parabolic mirror at full energy. The ultrafast temporal diagnostic (UTD) is responsible for characterizing pulse shapes of full-energy target shots ranging in width from < 1 to 100 ps as well as setting the desired pulse width before the shot. These diagnostics will enable, for the first time, complete spatial and temporal characterization of the focus of a high-energy peta-watt laser at full energy. (authors)

Diagnostic Spectrometers for High Energy Density X-Ray Sources

International Nuclear Information System (INIS)

Hudson, L. T.; Henins, A.; Seely, J. F.; Holland, G. E.

2007-01-01

A new generation of advanced laser, accelerator, and plasma confinement devices are emerging that are producing extreme states of light and matter that are unprecedented for laboratory study. Examples of such sources that will produce laboratory x-ray emissions with unprecedented characteristics include megajoule-class and ultrafast, ultraintense petawatt laser-produced plasmas; tabletop high-harmonic-generation x-ray sources; high-brightness zeta-pinch and magnetically confined plasma sources; and coherent x-ray free electron lasers and compact inverse-Compton x-ray sources. Characterizing the spectra, time structure, and intensity of x rays emitted by these and other novel sources is critical to assessing system performance and progress as well as pursuing the new and unpredictable physical interactions of interest to basic and applied high-energy-density (HED) science. As these technologies mature, increased emphasis will need to be placed on advanced diagnostic instrumentation and metrology, standard reference data, absolute calibrations and traceability of results.We are actively designing, fabricating, and fielding wavelength-calibrated x-ray spectrometers that have been employed to register spectra from a variety of exotic x-ray sources (electron beam ion trap, electron cyclotron resonance ion source, terawatt pulsed-power-driven accelerator, laser-produced plasmas). These instruments employ a variety of curved-crystal optics, detector technologies, and data acquisition strategies. In anticipation of the trends mentioned above, this paper will focus primarily on optical designs that can accommodate the high background signals produced in HED experiments while also registering their high-energy spectral emissions. In particular, we review the results of recent laboratory testing that explores off-Rowland circle imaging in an effort to reclaim the instrumental resolving power that is increasingly elusive at higher energies when using wavelength

Current Status and Future Prospects of "J-KAREN" — High Contrast, High Intensity Laser for Studying Relativistic Laser-Matter Interactions

Science.gov (United States)

Kiriyama, Hiromitsu; Mori, Michiaki; Okada, Hajime; Shimomura, Takuya; Nakai, Yoshiki; Tanoue, Manabu; Kondo, Shuji; Kanazawa, Shuhei; Yogo, Akifumi; Sagisaka, Akito; Ogura, Koichi; Hayashi, Yukio; Sakaki, Hironao; Pirozhkov, Alexander S.; Kotaki, Hideyuki; Fukuda, Yuji; Nishiuchi, Mamiko; Kando, Masaki; Bulanov, Sergei V.; Yamagiwa, Mitsuru; Kondo, Kiminori; Sugiyama, Akira; Bolton, Paul R.

We present the design and characterization of a high-contrast, petawatt-class Ti:sapphire chirped-pulse amplification (CPA) laser system. Two saturable absorbers and low-gain optical parametric chirped-pulse amplification (OPCPA) preamplifier in the double CPA laser chain have improved the temporal contrast to 1.4 × 1012 on the subnanosecond time scale at 70 terawatt level. Final uncompressed broadband pulse energy is 28 J, indicating the potential for reaching peak power near 600 terawatt. We also discuss the going upgrade to over petawatt level at a 0.1 Hz repetition rate briefly.

An environment for high energy physics code development

International Nuclear Information System (INIS)

Wisinski, D.E.

1987-01-01

As the size and complexity of high energy experiments increase there will be a greater need for better software tools and new programming environments. If these are not commercially available, then we must build them ourselves. This paper describes a prototype programming environment featuring a new type of file system, a ''smart'' editor, and integrated file management tools. This environment was constructed under the IBM VM/SP operating system. It uses the system interpreter, the system editor and the NOMAD2 relational database management system to create a software ''shell'' for the programmer. Some extensions to this environment are explored. (orig.)

Prepulse and amplified spontaneous emission effects on the interaction of a petawatt class laser with thin solid targets

Energy Technology Data Exchange (ETDEWEB)

Esirkepov, Timur Zh. [QuBS, Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); Koga, James K., E-mail: koga.james@jaea.go.jp [QuBS, Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); Sunahara, Atsushi [Institute for Laser Technology, 2-6 Yamadaoka Suita, Osaka 565-0871 (Japan); Morita, Toshimasa; Nishikino, Masaharu [QuBS, Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); Kageyama, Kei [Graduate School of Engineering, Osaka University, Osaka 565-0871 (Japan); Nagatomo, Hideo; Nishihara, Katsunobu [Institute of Laser Engineering, 2-6 Yamadaoka Suita, Osaka 565-0871 (Japan); Sagisaka, Akito; Kotaki, Hideyuki; Nakamura, Tatsufumi; Fukuda, Yuji; Okada, Hajime; Pirozhkov, Alexander S.; Yogo, Akifumi; Nishiuchi, Mamiko; Kiriyama, Hiromitsu; Kondo, Kiminori; Kando, Masaki [QuBS, Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); Bulanov, Sergei V. [QuBS, Japan Atomic Energy Agency, Kizugawa, Kyoto 619-0215 (Japan); A.M. Prokhorov Institute of General Physics of RAS, Vavilova st. 38, Moscow 117942 (Russian Federation); Moscow Institute of Physics and Technology, Dolgoprudny, Moscow Region 141700 (Russian Federation)

2014-05-01

When a finite contrast petawatt laser pulse irradiates a micron-thick foil, a prepulse (including amplified spontaneous emission) creates a preplasma, where an ultrashort relativistically strong portion of the laser pulse (the main pulse) acquires higher intensity due to relativistic self-focusing and undergoes fast depletion transferring energy to fast electrons. If the preplasma thickness is optimal, the main pulse can reach the target accelerating fast ions more efficiently than an ideal, infinite contrast, laser pulse. A simple analytical model of a target with preplasma formation is developed and the radiation pressure dominant acceleration of ions in this target is predicted. The preplasma formation by a nanosecond prepulse is analyzed with dissipative hydrodynamic simulations. The main pulse interaction with the preplasma is studied with multi-parametric particle-in-cell simulations. The optimal conditions for hundreds of MeV ion acceleration are found with accompanying effects important for diagnostics, including high-order harmonics generation.

Plasma lenses for ultrashort multi-petawatt laser pulses

Energy Technology Data Exchange (ETDEWEB)

Palastro, J. P.; Gordon, D.; Hafizi, B.; Johnson, L. A.; Peñano, J.; Hubbard, R. F.; Helle, M.; Kaganovich, D. [Naval Research Laboratory, Washington DC 20375-5346 (United States)

2015-12-15

An ideal plasma lens can provide the focusing power of a small f-number, solid-state focusing optic at a fraction of the diameter. An ideal plasma lens, however, relies on a steady-state, linear laser pulse-plasma interaction. Ultrashort multi-petawatt (MPW) pulses possess broad bandwidths and extreme intensities, and, as a result, their interaction with the plasma lens is neither steady state nor linear. Here, we examine nonlinear and time-dependent modifications to plasma lens focusing, and show that these result in chromatic and phase aberrations and amplitude distortion. We find that a plasma lens can provide enhanced focusing for 30 fs pulses with peak power up to ∼1 PW. The performance degrades through the MPW regime, until finally a focusing penalty is incurred at ∼10 PW.

Robust piezoelectric composites for energy harvesting in high-strain environments

NARCIS (Netherlands)

Ende, D.A. van der; Groen, W.A.; Zwaag, S. van der

2013-01-01

High-strain environments, such as are found in automobile tires, provide deformation energy that can be harvested using piezoelectric materials, for instance, for powering electronics such as wireless sensors. Despite numerous efforts, none of the present devices easily satisfy the stringent

Third-order correlator for measuring the time profile of petawatt laser pulses

Energy Technology Data Exchange (ETDEWEB)

Ginzburg, V N; Lozhkarev, V V; Luchinin, G A; Mironov, S Yu; Khazanov, Efim A; Yakovlev, I V [Institute of Applied Physics, Russian Academy of Sciences, Nizhnii Novgorod (Russian Federation); Didenko, N V; Konyashchenko, Aleksandr V; Lutsenko, Andrei P [' Avesta-project' Ltd., Troitsk, Moscow Region (Russian Federation)

2008-11-30

A third-order correlator with a single-shot time window and a full dynamic range of 10{sup 8} is developed. The time contrast of radiation from the front-end system of a petawatt femtosecond laser complex measured with the correlator within time windows {+-}1 ps and {+-}100 ps was 10{sup 4} and more than 10{sup 8}, respectively. Based on the theoretical analysis of the cross-correlator operation, a number of requirements providing the optimal functioning of the cross-correlator are found. The reasons restricting the technical parameters of the correlator are discussed. (measurement of parameters of laser radiation)

Third-order correlator for measuring the time profile of petawatt laser pulses

International Nuclear Information System (INIS)

Ginzburg, V N; Lozhkarev, V V; Luchinin, G A; Mironov, S Yu; Khazanov, Efim A; Yakovlev, I V; Didenko, N V; Konyashchenko, Aleksandr V; Lutsenko, Andrei P

2008-01-01

A third-order correlator with a single-shot time window and a full dynamic range of 10 8 is developed. The time contrast of radiation from the front-end system of a petawatt femtosecond laser complex measured with the correlator within time windows ±1 ps and ±100 ps was 10 4 and more than 10 8 , respectively. Based on the theoretical analysis of the cross-correlator operation, a number of requirements providing the optimal functioning of the cross-correlator are found. The reasons restricting the technical parameters of the correlator are discussed. (measurement of parameters of laser radiation)

High-Average-Power Diffraction Pulse-Compression Gratings Enabling Next-Generation Ultrafast Laser Systems

Energy Technology Data Exchange (ETDEWEB)

Alessi, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

2016-11-01

Pulse compressors for ultrafast lasers have been identified as a technology gap in the push towards high peak power systems with high average powers for industrial and scientific applications. Gratings for ultrashort (sub-150fs) pulse compressors are metallic and can absorb a significant percentage of laser energy resulting in up to 40% loss as well as thermal issues which degrade on-target performance. We have developed a next generation gold grating technology which we have scaled to the petawatt-size. This resulted in improvements in efficiency, uniformity and processing as compared to previous substrate etched gratings for high average power. This new design has a deposited dielectric material for the grating ridge rather than etching directly into the glass substrate. It has been observed that average powers as low as 1W in a compressor can cause distortions in the on-target beam. We have developed and tested a method of actively cooling diffraction gratings which, in the case of gold gratings, can support a petawatt peak power laser with up to 600W average power. We demonstrated thermo-mechanical modeling of a grating in its use environment and benchmarked with experimental measurement. Multilayer dielectric (MLD) gratings are not yet used for these high peak power, ultrashort pulse durations due to their design challenges. We have designed and fabricated broad bandwidth, low dispersion MLD gratings suitable for delivering 30 fs pulses at high average power. This new grating design requires the use of a novel Out Of Plane (OOP) compressor, which we have modeled, designed, built and tested. This prototype compressor yielded a transmission of 90% for a pulse with 45 nm bandwidth, and free of spatial and angular chirp. In order to evaluate gratings and compressors built in this project we have commissioned a joule-class ultrafast Ti:Sapphire laser system. Combining the grating cooling and MLD technologies developed here could enable petawatt laser systems to

Energy-Based Tetrahedron Sensor for High-Temperature, High-Pressure Environments

Science.gov (United States)

Gee, Kent L.; Sommerfeldt, Scott D.; Blotter, Jonathan D.

2012-01-01

An acoustic energy-based probe has been developed that incorporates multiple acoustic sensing elements in order to obtain the acoustic pressure and three-dimensional acoustic particle velocity. With these quantities, the user can obtain various energy-based quantities, including acoustic energy density, acoustic intensity, and acoustic impedance. In this specific development, the probe has been designed to operate in an environment characterized by high temperatures and high pressures as is found in the close vicinity of rocket plumes. Given these capabilities, the probe is designed to be used to investigate the acoustic conditions within the plume of a rocket engine or jet engine to facilitate greater understanding of the noise generation mechanisms in those plumes. The probe features sensors mounted inside a solid sphere. The associated electronics for the probe are contained within the sphere and the associated handle for the probe. More importantly, the design of the probe has desirable properties that reduce the bias errors associated with determining the acoustic pressure and velocity using finite sum and difference techniques. The diameter of the probe dictates the lower and upper operating frequencies for the probe, where accurate measurements can be acquired. The current probe design implements a sphere diameter of 1 in. (2.5 cm), which limits the upper operating frequency to about 4.5 kHz. The sensors are operational up to much higher frequencies, and could be used to acquire pressure data at higher frequencies, but the energy-based measurements are limited to that upper frequency. Larger or smaller spherical probes could be designed to go to lower or higher frequency range

5th International conference on High Energy Density Laboratory Astrophysics

CERN Document Server

Kyrala, G.A

2005-01-01

During the past several years, research teams around the world have developed astrophysics-relevant utilizing high energy-density facilities such as intense lasers and z-pinches. Research is underway in many areas, such as compressible hydrodynamic mixing, strong shock phenomena, radiation flow, radiative shocks and jets, complex opacities, equations o fstat, and relativistic plasmas. Beyond this current research and the papers it is producing, plans are being made for the application, to astrophysics-relevant research, of the 2 MJ National Ignition Facility (NIF) laser at Lawrence Livermore National Laboratory; the 600 kj Ligne d'Intergration Laser (LIL) and the 2 MJ Laser Megajoule (LMJ) in Bordeaux, France; petawatt-range lasers now under construction around the world; and current and future Z pinches. The goal of this conference and these proceedings is to continue focusing and attention on this emerging research area. The conference brought together different scientists interested in this emerging new fi...

SRAM-Based Passive Dosimeter for High-Energy Accelerator Environments

CERN Document Server

Makowski, D R; Napieralski, A; Swiercz, B P

2005-01-01

This paper reports a novel NVRAM-based neutron dose monitor (REM counter). The principle of this device is based on the radiation effect initiating the Single Event Upset SEU in high density microelectronic memories. Several batches of Non-Volatile memories from different manufactures were examined in various radiation environments, i.e. 241Am-Be (alpha,n) and Linear accelerators produced radiation fields. A suitable moderator was used to enhance the detector sensitivity. Further experiments were carried out in Linear Accelerators: Linac II, TTF2 and Beam Loss Environment of various Experimental Facilities at DESY Research Centre in Hamburg. A separate batch of SRAM was irradiated with 60Co-gamma rays up to a dose of about 60 Gy. No Single Event Upset (SEU) was registered. This validates, that gamma radiation has a negligible effect to trigger SEU in the SRAM. The proposed detector could be ideal for a neutron dose measurement produced by a high-energy electron linac, including synchrotron and Free Electron L...

Influence of spatial beam inhomogeneities on the parameters of a petawatt laser system based on multi-stage parametric amplification

International Nuclear Information System (INIS)

Frolov, S A; Trunov, V I; Pestryakov, Efim V; Leshchenko, V E

2013-01-01

We have developed a technique for investigating the evolution of spatial inhomogeneities in high-power laser systems based on multi-stage parametric amplification. A linearised model of the inhomogeneity development is first devised for parametric amplification with the small-scale self-focusing taken into account. It is shown that the application of this model gives the results consistent (with high accuracy and in a wide range of inhomogeneity parameters) with the calculation without approximations. Using the linearised model, we have analysed the development of spatial inhomogeneities in a petawatt laser system based on multi-stage parametric amplification, developed at the Institute of Laser Physics, Siberian Branch of the Russian Academy of Sciences (ILP SB RAS). (control of laser radiation parameters)

Micron-scale mapping of megagauss magnetic fields using optical polarimetry to probe hot electron transport in petawatt-class laser-solid interactions.

Science.gov (United States)

Chatterjee, Gourab; Singh, Prashant Kumar; Robinson, A P L; Blackman, D; Booth, N; Culfa, O; Dance, R J; Gizzi, L A; Gray, R J; Green, J S; Koester, P; Kumar, G Ravindra; Labate, L; Lad, Amit D; Lancaster, K L; Pasley, J; Woolsey, N C; Rajeev, P P

2017-08-21

The transport of hot, relativistic electrons produced by the interaction of an intense petawatt laser pulse with a solid has garnered interest due to its potential application in the development of innovative x-ray sources and ion-acceleration schemes. We report on spatially and temporally resolved measurements of megagauss magnetic fields at the rear of a 50-μm thick plastic target, irradiated by a multi-picosecond petawatt laser pulse at an incident intensity of ~10 20 W/cm 2 . The pump-probe polarimetric measurements with micron-scale spatial resolution reveal the dynamics of the magnetic fields generated by the hot electron distribution at the target rear. An annular magnetic field profile was observed ~5 ps after the interaction, indicating a relatively smooth hot electron distribution at the rear-side of the plastic target. This is contrary to previous time-integrated measurements, which infer that such targets will produce highly structured hot electron transport. We measured large-scale filamentation of the hot electron distribution at the target rear only at later time-scales of ~10 ps, resulting in a commensurate large-scale filamentation of the magnetic field profile. Three-dimensional hybrid simulations corroborate our experimental observations and demonstrate a beam-like hot electron transport at initial time-scales that may be attributed to the local resistivity profile at the target rear.

Design of a petawatt optical parametric chirped pulse amplification upgrade of the kilojoule iodine laser PALS

Czech Academy of Sciences Publication Activity Database

Novák, Ondřej; Divoký, Martin; Turčičová, Hana; Straka, Petr

2013-01-01

Roč. 31, č. 2 (2013), s. 211-218 ISSN 0263-0346 R&D Projects: GA ČR GA202/06/0814; GA MŠk(CZ) LC528; GA MŠk LN00A100 EU Projects: European Commission(XE) 506350 - LASERLAB-EUROPE Institutional support: RVO:68378271 Keywords : VULCAN petawatt * system * prospects * facility * program Subject RIV: BH - Optics, Masers, Lasers Impact factor: 1.701, year: 2013 http://journals.cambridge.org/action/displayAbstract?fromPage=online& aid =8950936

Dynamic high energy density plasma environments at the National Ignition Facility for nuclear science research

Science.gov (United States)

Cerjan, Ch J.; Bernstein, L.; Berzak Hopkins, L.; Bionta, R. M.; Bleuel, D. L.; Caggiano, J. A.; Cassata, W. S.; Brune, C. R.; Frenje, J.; Gatu-Johnson, M.; Gharibyan, N.; Grim, G.; Hagmann, Chr; Hamza, A.; Hatarik, R.; Hartouni, E. P.; Henry, E. A.; Herrmann, H.; Izumi, N.; Kalantar, D. H.; Khater, H. Y.; Kim, Y.; Kritcher, A.; Litvinov, Yu A.; Merrill, F.; Moody, K.; Neumayer, P.; Ratkiewicz, A.; Rinderknecht, H. G.; Sayre, D.; Shaughnessy, D.; Spears, B.; Stoeffl, W.; Tommasini, R.; Yeamans, Ch; Velsko, C.; Wiescher, M.; Couder, M.; Zylstra, A.; Schneider, D.

2018-03-01

The generation of dynamic high energy density plasmas in the pico- to nano-second time domain at high-energy laser facilities affords unprecedented nuclear science research possibilities. At the National Ignition Facility (NIF), the primary goal of inertial confinement fusion research has led to the synergistic development of a unique high brightness neutron source, sophisticated nuclear diagnostic instrumentation, and versatile experimental platforms. These novel experimental capabilities provide a new path to investigate nuclear processes and structural effects in the time, mass and energy density domains relevant to astrophysical phenomena in a unique terrestrial environment. Some immediate applications include neutron capture cross-section evaluation, fission fragment production, and ion energy loss measurement in electron-degenerate plasmas. More generally, the NIF conditions provide a singular environment to investigate the interplay of atomic and nuclear processes such as plasma screening effects upon thermonuclear reactivity. Achieving enhanced understanding of many of these effects will also significantly advance fusion energy research and challenge existing theoretical models.

Simulation Analysis of Transmission-Line Impedance Transformers for Petawatt-Class Pulsed Power Accelerators

International Nuclear Information System (INIS)

Hu Yixiang; Qiu Aici; Sun Fengju; Huang Tao; Cong Peitian; Wang Liangping; Zeng Jiangtao; Li Yan; Zhang Xinjun; Lei Tianshi

2011-01-01

Based on the transmission line code TLCODE, a 1D circuit model for a transmission-line impedance transformer was developed and the simulation results were compared with those in the literature. The model was used to quantify the efficiencies of voltage-transport, energy-transport and power-transport for a transmission-line impedance transformer as functions of ψ (the ratio of the output impedance to the input impedance of the transformer) and Γ (the ratio of the pulse width to the one-way transit time of the transformer) under a large scale of m (the coefficient of the generalized exponential impedance profile). Simulation results suggest that with the increase in Γ, from 0 to ∞, the power transport efficiency first increases and then decreases. The maximum power transport efficiency can reach 90% or even higher for an exponential impedance profile (m = 1). With a consideration of dissipative loss in the dielectric and electrodes of the transformer, two representative designs of the water-insulated transformer are investigated for the next generation of petawatt-class z-pinch drivers. It is found that the dissipative losses in the electrodes are negligibly small, below 0.1%, but the dissipative loss in the water dielectric is about 1% to 4%. (fusion engineering)

Megagauss field generation for high-energy-density plasma science experiments

International Nuclear Information System (INIS)

Rovang, Dean Curtis; Struve, Kenneth William; Porter, John Larry Jr.

2008-01-01

There is a need to generate magnetic fields both above and below 1 megagauss (100 T) with compact generators for laser-plasma experiments in the Beamlet and Petawatt test chambers for focused research on fundamental properties of high energy density magnetic plasmas. Some of the important topics that could be addressed with such a capability are magnetic field diffusion, particle confinement, plasma instabilities, spectroscopic diagnostic development, material properties, flux compression, and alternate confinement schemes, all of which could directly support experiments on Z. This report summarizes a two-month study to develop preliminary designs of magnetic field generators for three design regimes. These are, (1) a design for a relatively low-field (10 to 50 T), compact generator for modest volumes (1 to 10 cm3), (2) a high-field (50 to 200 T) design for smaller volumes (10 to 100 mm3), and (3) an extreme field (greater than 600 T) design that uses flux compression. These designs rely on existing Sandia pulsed-power expertise and equipment, and address issues of magnetic field scaling with capacitor bank design and field inductance, vacuum interface, and trade-offs between inductance and coil designs

Spectral correction factors for conventional neutron dosemeters used in high-energy neutron environments

International Nuclear Information System (INIS)

Lee, K.W.; Sheu, R.J.

2015-01-01

High-energy neutrons (>10 MeV) contribute substantially to the dose fraction but result in only a small or negligible response in most conventional moderated-type neutron detectors. Neutron dosemeters used for radiation protection purpose are commonly calibrated with 252 Cf neutron sources and are used in various workplace. A workplace-specific correction factor is suggested. In this study, the effect of the neutron spectrum on the accuracy of dose measurements was investigated. A set of neutron spectra representing various neutron environments was selected to study the dose responses of a series of Bonner spheres, including standard and extended-range spheres. By comparing 252 Cf-calibrated dose responses with reference values based on fluence-to-dose conversion coefficients, this paper presents recommendations for neutron field characterisation and appropriate correction factors for responses of conventional neutron dosemeters used in environments with high-energy neutrons. The correction depends on the estimated percentage of high-energy neutrons in the spectrum or the ratio between the measured responses of two Bonner spheres (the 4P6-8 extended-range sphere versus the 6'' standard sphere). (authors)

Optimized transmission-line impedance transformers for petawatt-class pulsed-power accelerators

Directory of Open Access Journals (Sweden)

D. R. Welch

2008-03-01

Full Text Available We have developed 1D analytic and 2D fully electromagnetic models of radial transmission-line impedance transformers. The models have been used to quantify the power-transport efficiency and pulse sharpening of such transformers as a function of voltage pulse width and impedance profile. For the cases considered, we find that in the limit as Γ→0 (where Γ is the ratio of the pulse width to the one-way transit time of the transformer, the transport efficiency is maximized when the impedance profile is exponential. As Γ increases from zero, the optimum profile gradually deviates from an exponential. A numerical procedure is presented that determines the optimum profile for a given pulse shape and width. The procedure can be applied to optimize the design of impedance transformers used in petawatt-class pulsed-power accelerators.

8. High power laser and ignition facilities

International Nuclear Information System (INIS)

Bayramian, A.J.; Beach, R.J.; Bibeau, C.

2002-01-01

This document gives a review of the various high power laser projects and ignition facilities in the world: the Mercury laser system and Electra (Usa), the krypton fluoride (KrF) laser and the HALNA (high average power laser for nuclear-fusion application) project (Japan), the Shenguang series, the Xingguang facility and the TIL (technical integration line) facility (China), the Vulcan peta-watt interaction facility (UK), the Megajoule project and its feasibility phase: the LIL (laser integration line) facility (France), the Asterix IV/PALS high power laser facility (Czech Republic), and the Phelix project (Germany). In Japan the 100 TW Petawatt Module Laser, constructed in 1997, is being upgraded to the world biggest peta-watt laser. Experiments have been performed with single-pulse large aperture e-beam-pumped Garpun (Russia) and with high-current-density El-1 KrF laser installation (Russia) to investigate Al-Be foil transmittance and stability to multiple e-beam irradiations. An article is dedicated to a comparison of debris shield impacts for 2 experiments at NIF (national ignition facility). (A.C.)

The 2005 Energy/Environment report

International Nuclear Information System (INIS)

2006-01-01

The Report, of which we publish the compendium, is the annual analysis of the energy/environment situation in Italy. After an overview of the international economic and energy scene, the Report investigates energy supply and demand in Italy, the scenarios until 2020 in the presence of high prices, greenhouse gas emission, the role of the Regions in energy planning, and research expenditure [it

An empirical model of the high-energy electron environment at Jupiter

Science.gov (United States)

Soria-Santacruz, M.; Garrett, H. B.; Evans, R. W.; Jun, I.; Kim, W.; Paranicas, C.; Drozdov, A.

2016-10-01

We present an empirical model of the energetic electron environment in Jupiter's magnetosphere that we have named the Galileo Interim Radiation Electron Model version-2 (GIRE2) since it is based on Galileo data from the Energetic Particle Detector (EPD). Inside 8RJ, GIRE2 adopts the previously existing model of Divine and Garrett because this region was well sampled by the Pioneer and Voyager spacecraft but poorly covered by Galileo. Outside of 8RJ, the model is based on 10 min averages of Galileo EPD data as well as on measurements from the Geiger Tube Telescope on board the Pioneer spacecraft. In the inner magnetosphere the field configuration is dipolar, while in the outer magnetosphere it presents a disk-like structure. The gradual transition between these two behaviors is centered at about 17RJ. GIRE2 distinguishes between the two different regions characterized by these two magnetic field topologies. Specifically, GIRE2 consists of an inner trapped omnidirectional model between 8 to 17RJ that smoothly joins onto the original Divine and Garrett model inside 8RJ and onto a GIRE2 plasma sheet model at large radial distances. The model provides a complete picture of the high-energy electron environment in the Jovian magnetosphere from ˜1 to 50RJ. The present manuscript describes in great detail the data sets, formulation, and fittings used in the model and provides a discussion of the predicted high-energy electron fluxes as a function of energy and radial distance from the planet.

Energy and environment

International Nuclear Information System (INIS)

Barrere, M.

1978-01-01

Energy problems will play a fundamental role in the near future and researchers, engineers, economists and ecologists must work together to increase existing non-fossil energy sources and to develop new sources or techniques using less energy without pollution of the environment. Four aspects of future activities in this field are considered. First, energy sources, ie solar, fossil, nuclear, geothermal, and others such as wind energy or wave energy are considered in relation to the environment. Secondly the use of these sources by industry and by transportation, domestic, and agricultural sectors are examined. The problem of energy conservation in all fields is then considered. Finally the overall optimisation is analysed. This is the search for a compromise between the cost of usable energy and that of a degradation function taking into account the effect on the environment. (U.K.)

High contrast high intensity petawatt J-KAREN-P laser facility at QST

Science.gov (United States)

Nishiuchi, Mamiko; Kiriyama, Hiromitsu; Sakaki, Hironao; Dover, Nicholas P.; Kondo, Kotaro; Pirozhkov, Alexander S.; Sagisaka, Akito; Fukuda, Yuji; Nishitani, Keita; Miyahara, Takumi; Ogura, Koichi; Alkhimova, Mariya A.; Pikuz, Tatiana A.; Faenov, Anatoly Y.; Watanabe, Yukinobu; Koga, James; Bulanov, Sergei V.; Kando, Masaki; Kondo, Kiminori

2017-05-01

We report on the J-KAREN-P laser facility at QST, which can provide PW peak power at 0.1 Hz on target. The system can deliver short pulses with an energy of 30 J and pulse duration of 30 fs after compression with a contrast level of better than 1012. Such performance in high field science will give rise to the birth of new applications and breakthroughs, which include relativistic particle acceleration, bright x-ray source generation, and nuclear activation. The current achieved laser intensity on target is up to > 9x1021 Wcm-2 with an energy of 9 J on target. The interaction with a 3 to 5- μm stainless steel tape target provides us electrons with a typical temperature of more than 10 MeV and energetic proton beams with typical maximum energies of > 40 MeV with good reproducibility. The protons are accelerated in the Target Normal Sheath Acceleration regime, which is suitable for many applications including as an injector into a beamline for medical use, which is one of our objectives.

Fast ignition realization experiment with high-contrast kilo-joule peta-watt LFEX laser and strong external magnetic field

Science.gov (United States)

Fujioka, Shinsuke; Arikawa, Yasunobu; Kojima, Sadaoki; Johzaki, Tomoyuki; Nagatomo, Hideo; Sawada, Hiroshi; Lee, Seung Ho; Shiroto, Takashi; Ohnishi, Naofumi; Morace, Alessio; Vaisseau, Xavier; Sakata, Shohei; Abe, Yuki; Matsuo, Kazuki; Farley Law, King Fai; Tosaki, Shota; Yogo, Akifumi; Shigemori, Keisuke; Hironaka, Yoichiro; Zhang, Zhe; Sunahara, Atsushi; Ozaki, Tetsuo; Sakagami, Hitoshi; Mima, Kunioki; Fujimoto, Yasushi; Yamanoi, Kohei; Norimatsu, Takayoshi; Tokita, Shigeki; Nakata, Yoshiki; Kawanaka, Junji; Jitsuno, Takahisa; Miyanaga, Noriaki; Nakai, Mitsuo; Nishimura, Hiroaki; Shiraga, Hiroyuki; Kondo, Kotaro; Bailly-Grandvaux, Mathieu; Bellei, Claudio; Santos, João Jorge; Azechi, Hiroshi

2016-05-01

A petawatt laser for fast ignition experiments (LFEX) laser system [N. Miyanaga et al., J. Phys. IV France 133, 81 (2006)], which is currently capable of delivering 2 kJ in a 1.5 ps pulse using 4 laser beams, has been constructed beside the GEKKO-XII laser facility for demonstrating efficient fast heating of a dense plasma up to the ignition temperature under the auspices of the Fast Ignition Realization EXperiment (FIREX) project [H. Azechi et al., Nucl. Fusion 49, 104024 (2009)]. In the FIREX experiment, a cone is attached to a spherical target containing a fuel to prevent a corona plasma from entering the path of the intense heating LFEX laser beams. The LFEX laser beams are focused at the tip of the cone to generate a relativistic electron beam (REB), which heats a dense fuel core generated by compression of a spherical deuterized plastic target induced by the GEKKO-XII laser beams. Recent studies indicate that the current heating efficiency is only 0.4%, and three requirements to achieve higher efficiency of the fast ignition (FI) scheme with the current GEKKO and LFEX systems have been identified: (i) reduction of the high energy tail of the REB; (ii) formation of a fuel core with high areal density using a limited number (twelve) of GEKKO-XII laser beams as well as a limited energy (4 kJ of 0.53-μm light in a 1.3 ns pulse); (iii) guiding and focusing of the REB to the fuel core. Laser-plasma interactions in a long-scale plasma generate electrons that are too energetic to efficiently heat the fuel core. Three actions were taken to meet the first requirement. First, the intensity contrast of the foot pulses to the main pulses of the LFEX was improved to >109. Second, a 5.5-mm-long cone was introduced to reduce pre-heating of the inner cone wall caused by illumination of the unconverted 1.053-μm light of implosion beam (GEKKO-XII). Third, the outside of the cone wall was coated with a 40-μm plastic layer to protect it from the pressure caused by imploding

Fast ignition realization experiment with high-contrast kilo-joule peta-watt LFEX laser and strong external magnetic field

Energy Technology Data Exchange (ETDEWEB)

Fujioka, Shinsuke, E-mail: sfujioka@ile.osaka-u.ac.jp; Arikawa, Yasunobu; Kojima, Sadaoki; Nagatomo, Hideo; Lee, Seung Ho; Morace, Alessio; Vaisseau, Xavier; Sakata, Shohei; Abe, Yuki; Matsuo, Kazuki; Farley Law, King Fai; Tosaki, Shota; Yogo, Akifumi; Shigemori, Keisuke; Hironaka, Yoichiro; Fujimoto, Yasushi; Yamanoi, Kohei; Norimatsu, Takayoshi; Tokita, Shigeki; Nakata, Yoshiki [Institute of Laser Engineering, Osaka University, 2-6 Yamada-Oka, Suita, Osaka 565-0871 Japan (Japan); and others

2016-05-15

A petawatt laser for fast ignition experiments (LFEX) laser system [N. Miyanaga et al., J. Phys. IV France 133, 81 (2006)], which is currently capable of delivering 2 kJ in a 1.5 ps pulse using 4 laser beams, has been constructed beside the GEKKO-XII laser facility for demonstrating efficient fast heating of a dense plasma up to the ignition temperature under the auspices of the Fast Ignition Realization EXperiment (FIREX) project [H. Azechi et al., Nucl. Fusion 49, 104024 (2009)]. In the FIREX experiment, a cone is attached to a spherical target containing a fuel to prevent a corona plasma from entering the path of the intense heating LFEX laser beams. The LFEX laser beams are focused at the tip of the cone to generate a relativistic electron beam (REB), which heats a dense fuel core generated by compression of a spherical deuterized plastic target induced by the GEKKO-XII laser beams. Recent studies indicate that the current heating efficiency is only 0.4%, and three requirements to achieve higher efficiency of the fast ignition (FI) scheme with the current GEKKO and LFEX systems have been identified: (i) reduction of the high energy tail of the REB; (ii) formation of a fuel core with high areal density using a limited number (twelve) of GEKKO-XII laser beams as well as a limited energy (4 kJ of 0.53-μm light in a 1.3 ns pulse); (iii) guiding and focusing of the REB to the fuel core. Laser–plasma interactions in a long-scale plasma generate electrons that are too energetic to efficiently heat the fuel core. Three actions were taken to meet the first requirement. First, the intensity contrast of the foot pulses to the main pulses of the LFEX was improved to >10{sup 9}. Second, a 5.5-mm-long cone was introduced to reduce pre-heating of the inner cone wall caused by illumination of the unconverted 1.053-μm light of implosion beam (GEKKO-XII). Third, the outside of the cone wall was coated with a 40-μm plastic layer to protect it from the pressure caused

Energy-water-environment nexus underpinning future desalination sustainability

KAUST Repository

Shahzad, Muhammad Wakil

2017-03-11

Energy-water-environment nexus is very important to attain COP21 goal, maintaining environment temperature increase below 2°C, but unfortunately two third share of CO2 emission has already been used and the remaining will be exhausted by 2050. A number of technological developments in power and desalination sectors improved their efficiencies to save energy and carbon emission but still they are operating at 35% and 10% of their thermodynamic limits. Research in desalination processes contributing to fuel World population for their improved living standard and to reduce specific energy consumption and to protect environment. Recently developed highly efficient nature-inspired membranes (aquaporin & graphene) and trend in thermally driven cycle\\'s hybridization could potentially lower then energy requirement for water purification. This paper presents a state of art review on energy, water and environment interconnection and future energy efficient desalination possibilities to save energy and protect environment.

International environment, enterprise environment and energy environment giving different look

Energy Technology Data Exchange (ETDEWEB)

Kubo, Shunsuke

1987-04-01

0he international environment, enterprise environment and energy environment surrounding Japan are changing their looks. In such situation, what Japan should do for the development of the world was discussed. Internationally, in the Western Pacific economical block including Japan and Asian NICs, Japan promotes the international exchange of materials, capital, technology, information and people, and creates various international public properties. Enterprisers should have global mind, and cope with the internationalization, technical innovation and information orientation which are in progress at present through international exchange, interindustrial exchange, industry-university-government exchange and so on. In the aspect of energy environment, Japan carries out the technical development of energy conservation, energy, creation and the exploration of energy resources, in this way, contributes to the stabilization of energy in the world. (3 figs, 1 tab)

Using high-intensity laser-generated energetic protons to radiograph directly driven implosions

International Nuclear Information System (INIS)

Zylstra, A. B.; Li, C. K.; Rinderknecht, H. G.; Seguin, F. H.; Petrasso, R. D.; Stoeckl, C.; Meyerhofer, D. D.; Nilson, P.; Sangster, T. C.; Le Pape, S.; Mackinnon, A.; Patel, P.

2012-01-01

The recent development of petawatt-class lasers with kilojoule-picosecond pulses, such as OMEGA EP [L. Waxer et al., Opt. Photonics News 16, 30 (2005)], provides a new diagnostic capability to study inertial-confinement-fusion (ICF) and high-energy-density (HED) plasmas. Specifically, petawatt OMEGA EP pulses have been used to backlight OMEGA implosions with energetic proton beams generated through the target normal sheath acceleration (TNSA) mechanism. This allows time-resolved studies of the mass distribution and electromagnetic field structures in ICF and HED plasmas. This principle has been previously demonstrated using Vulcan to backlight six-beam implosions [A. J. Mackinnon et al., Phys. Rev. Lett. 97, 045001 (2006)]. The TNSA proton backlighter offers better spatial and temporal resolution but poorer spatial uniformity and energy resolution than previous D 3 He fusion-based techniques [C. Li et al., Rev. Sci. Instrum. 77, 10E725 (2006)]. A target and the experimental design technique to mitigate potential problems in using TNSA backlighting to study full-energy implosions is discussed. The first proton radiographs of 60-beam spherical OMEGA implosions using the techniques discussed in this paper are presented. Sample radiographs and suggestions for troubleshooting failed radiography shots using TNSA backlighting are given, and future applications of this technique at OMEGA and the NIF are discussed.

High energy physics and grid computing

International Nuclear Information System (INIS)

Yu Chuansong

2004-01-01

The status of the new generation computing environment of the high energy physics experiments is introduced briefly in this paper. The development of the high energy physics experiments and the new computing requirements by the experiments are presented. The blueprint of the new generation computing environment of the LHC experiments, the history of the Grid computing, the R and D status of the high energy physics grid computing technology, the network bandwidth needed by the high energy physics grid and its development are described. The grid computing research in Chinese high energy physics community is introduced at last. (authors)

Control of the radiation environment and the worker in high-energy facilities

International Nuclear Information System (INIS)

Stevenson, G.R.

1993-01-01

The philosophy behind the prediction, measurement, monitoring and limitation by access control of the radiation hazard in high-energy accelerator facilities is compared with that which could be employed for controlling similar hazards due to cosmic radiation in civil aircraft flights. Special mention is made of computer simulations of the radiation environment as a means of predicting necessary control measures, of the reliability and integration of radiation measuring devices into control procedures and of the relevance of different access control procedures. (author)

Integrating INIS into a high energy physics information environment thoughts from CERN

CERN Document Server

Yeomans, Joanne; Baudic, Romain; Picchioli, Ingrid; International Conference on Nuclear Knowledge Management : Strategies, Information Management and Human Resource Development. Special Session : The Role of INIS in Knowledge Preservation

2004-01-01

Information searchers from the high energy physics community expect an integrated information environment. The CERN Library offers its print and electronic collections through a combined Web interface and maintains the database by semi-automated processes to upload bibliographic and full-text records. Suggestions are offered by which INIS could develop its own Web interface and better match HEP users’ expectations. These include implementing full-text linking, increasing currency, expanding search and display functions and developing the richness of the data. Links with the National Nuclear Data Center and Crossref could also increase its visibility.

Using high-intensity laser-generated energetic protons to radiograph directly driven implosions

Science.gov (United States)

Zylstra, A. B.; Li, C. K.; Rinderknecht, H. G.; Séguin, F. H.; Petrasso, R. D.; Stoeckl, C.; Meyerhofer, D. D.; Nilson, P.; Sangster, T. C.; Le Pape, S.; Mackinnon, A.; Patel, P.

2012-01-01

The recent development of petawatt-class lasers with kilojoule-picosecond pulses, such as OMEGA EP [L. Waxer et al., Opt. Photonics News 16, 30 (2005), 10.1364/OPN.16.7.000030], provides a new diagnostic capability to study inertial-confinement-fusion (ICF) and high-energy-density (HED) plasmas. Specifically, petawatt OMEGA EP pulses have been used to backlight OMEGA implosions with energetic proton beams generated through the target normal sheath acceleration (TNSA) mechanism. This allows time-resolved studies of the mass distribution and electromagnetic field structures in ICF and HED plasmas. This principle has been previously demonstrated using Vulcan to backlight six-beam implosions [A. J. Mackinnon et al., Phys. Rev. Lett. 97, 045001 (2006), 10.1103/PhysRevLett.97.045001]. The TNSA proton backlighter offers better spatial and temporal resolution but poorer spatial uniformity and energy resolution than previous D3He fusion-based techniques [C. Li et al., Rev. Sci. Instrum. 77, 10E725 (2006), 10.1063/1.2228252]. A target and the experimental design technique to mitigate potential problems in using TNSA backlighting to study full-energy implosions is discussed. The first proton radiographs of 60-beam spherical OMEGA implosions using the techniques discussed in this paper are presented. Sample radiographs and suggestions for troubleshooting failed radiography shots using TNSA backlighting are given, and future applications of this technique at OMEGA and the NIF are discussed.

High and medium high energy lines in France. The SATURNE case

International Nuclear Information System (INIS)

Milleret, G.

1994-01-01

Located in the Paris area, the SATURNE accelerator produces high energy charged particles: protons, deuterons, helium 3, helium 4, neutrons. The beams, with very flexible characteristics (linear energy transfer, flexible environment, dimension and intensity) for simulation of cosmic particles or high energy accelerator environments, allow for testing various individual or complete components. The various commercial offers and prices are presented. 5 fig., 2 ref

P-marking of indoor environment and energy use - Considerations prior to certification of energy use

Energy Technology Data Exchange (ETDEWEB)

Wahlstroem, Aasa

2008-02-15

SP Technical Research Institute of Sweden's P-marking quality assurance scheme for buildings, products, services etc., now includes P-marking of the indoor environment and energy use performance of buildings. The rules for the system, which cover new buildings, renovation and existing buildings, are set out in SP's Certification Rules no. SPCR 114E, specifying requirements in respect of both energy use and indoor environment management. Over the last ten years, SP has carried out considerable work in the field of the indoor environment, resulting in the development of a quality assurance system concentrating on achieving a high-quality indoor environment. This quality assurance system has been successfully applied to schools, offices and dwellings. However, the performance of a building is determined not only by a good indoor environment, but also by low impact on the external environment as a result of energy use in the building. In some cases, concentrating on either good indoor environment or energy efficiency may result in an adverse effect on the other aspect, and so the quality assurance system for indoor environments been extended with a section dealing with energy use. This document is a handbook for inspection of documentation concerning quality assurance of energy use (primary energy analysis, determination of energy targets, energy management systems etc.). It can also be helpful for the organisation that is applying for P-marking when drawing up checklists. The document concentrates on requirements for approved certification of energy use in connection with P-marking of indoor environments and energy use in existing buildings: it does not cover requirements for certification of indoor environments. It starts by describing targeting, aims and requirements for P-marking of energy use, followed by presentation of some examples of inspections of collected documentation

Dilemmas for China: Energy, Economy and Environment

Directory of Open Access Journals (Sweden)

Xu Tang

2015-05-01

Full Text Available China’s current national policies promote high levels of economic growth, transforming China into a “world factory”, but at a high cost in terms of energy and the environment. At the same time, this growth and transformation also forms the backbone of China’s economy, underpinning social stability. China faces a dilemma to reconcile its economy, energy system and environmental security. Each aspect of this triad is discussed in this study to illuminate the challenges faced by China, and China’s dilemma in energy, economy and environment is analyzed from the perspective of its participation in current global supply chains. While China must import a significant proportion of its energy and a large proportion of primary materials, a large share of these imports are returned to the global market as industrial exports. China is bound by its own course of action and unable to radically change its position for the foreseeable future as the road to economic development and employment stability is through policies built on exports and shifting development models, presenting a tough socio-economic trade-off. China’s growth challenges are discussed as an example of challenges more broadly faced in the developing world. China’s success or failure in achieving a sustainable developmental pattern will inevitably have a significant influence on the global environment.

Advances in energy and environment. Vol. 1: Energy

International Nuclear Information System (INIS)

El-Sharkawy, A.L.; Kummler, R.H.

1996-01-01

The 5th conference of energy and environment was held on 3-6 June 1996 in Cairo. The specialists discussed the effects of advances in energy and environment. The applications of solar energy, heat transfer, thermal application, storage and bio-conversion, fuels, energy and development. Studies were discussed at the meeting and more than 1000 papers were presented. This first volume covers papers presented on the following topics: solar thermal, heat transfer and thermal applications, storage and bio-conversion, refrigeration and iar conditioning, combustion, fuels and engines, energy and development. tabs., figs

Energy and environment efficiency analysis based on an improved environment DEA cross-model: Case study of complex chemical processes

International Nuclear Information System (INIS)

Geng, ZhiQiang; Dong, JunGen; Han, YongMing; Zhu, QunXiong

2017-01-01

Highlights: •An improved environment DEA cross-model method is proposed. •Energy and environment efficiency analysis framework of complex chemical processes is obtained. •This proposed method is efficient in energy-saving and emission reduction of complex chemical processes. -- Abstract: The complex chemical process is a high pollution and high energy consumption industrial process. Therefore, it is very important to analyze and evaluate the energy and environment efficiency of the complex chemical process. Data Envelopment Analysis (DEA) is used to evaluate the relative effectiveness of decision-making units (DMUs). However, the traditional DEA method usually cannot genuinely distinguish the effective and inefficient DMU due to its extreme or unreasonable weight distribution of input and output variables. Therefore, this paper proposes an energy and environment efficiency analysis method based on an improved environment DEA cross-model (DEACM) method. The inputs of the complex chemical process are divided into energy and non-energy inputs. Meanwhile, the outputs are divided into desirable and undesirable outputs. And then the energy and environment performance index (EEPI) based on the cross evaluation is used to represent the overall performance of each DMU. Moreover, the improvement direction of energy-saving and carbon emission reduction of each inefficiency DMU is quantitatively obtained based on the self-evaluation model of the improved environment DEACM. The results show that the improved environment DEACM method has a better effective discrimination than the original DEA method by analyzing the energy and environment efficiency of the ethylene production process in complex chemical processes, and it can obtain the potential of energy-saving and carbon emission reduction of ethylene plants, especially the improvement direction of inefficient DMUs to improve energy efficiency and reduce carbon emission.

Architecture of petawatt-class z-pinch accelerators

International Nuclear Information System (INIS)

Stygar, William A.; Mazarakis, Michael Gerrassimos; Cuneo, Michael Edward; Leeper, Ramon Joe; Ives, H.C.; Headley, D.I.; Wagoner, Tim C.; Porter, John Larry Jr.

2006-01-01

We have developed an accelerator architecture that can serve as the basis of the design of petawatt-class z-pinch drivers. The architecture has been applied to the design of two z-pinch accelerators, each of which can be contained within a 104-m-diameter cylindrical tank. One accelerator is driven by slow (∼1 (micro)s) Marx generators, which are a mature technology but which necessitate significant pulse compression to achieve the short pulses ( 4 capacitors, store 98 MJ, and erect to 5 MV; (ii) 600 water-dielectric triplate intermediate-store transmission lines, which also serve as pulse-forming lines; (iii) 600 5-MV laser-triggered gas switches; (iv) three monolithic radial-transmission-line impedance transformers, with triplate geometries and exponential impedance profiles; (v) a 6-level 5.5-m-diameter 15-MV vacuum insulator stack; (vi) six magnetically insulated vacuum transmission lines (MITLs); and (vii) a triple-post-hole vacuum convolute that adds the output currents of the six MITLs, and delivers the combined current to a z-pinch load. The accelerator delivers an effective peak current of 52 MA to a 10-mm-length z pinch that implodes in 95 ns, and 57 MA to a pinch that implodes in 120 ns. The LTD-driven accelerator includes monolithic radial transformers and a MITL system similar to those described above, but does not include intermediate-store transmission lines, multimegavolt gas switches, or a laser trigger system. Instead, this accelerator is driven by 210 LTD modules that include a total of 1 x 10 6 capacitors and 5 x 10 5 200-kV electrically triggered gas switches. The LTD accelerator stores 182 MJ and produces a peak electrical power of 1000 TW. The accelerator delivers an effective peak current of 68 MA to a pinch that implodes in 95 ns, and 75 MA to a pinch that implodes in 120 ns. Conceptually straightforward upgrades to these designs would deliver even higher pinch currents and faster implosions

Energy, ecology, and the environment

CERN Document Server

Wilson, Richard F

1974-01-01

Energy, Ecology, and the Environment discusses how our need for energy and the different means required to obtain it affect the environment and the harnessing of different natural resources. The book also aims to show more efficient ways to use and generate energy. The book, after a brief introduction to the concept of energy, covers topics such as the different energy resources and the demands, costs, and policies regarding energy. The book also discusses the problems brought about by the production of energy such as the hazards to nature and man; environmental problems and pollution; and

Energy situation and energy-related environment issues of Pacific Island countries

International Nuclear Information System (INIS)

Siwatibau, Suliana

1991-01-01

Pacific Islands have experienced low economic growth during the 1980s, and face significant energy problems. Petroleum products are imported at very high prices and biofuel use often leads to resource over-exploitation. However, perhaps the most basic energy-environment concern is the potential for sea level rise. Some Pacific Island nations would vanish altogether, while others would lose their most productive areas. (author)

Energy, environment and development

Energy Technology Data Exchange (ETDEWEB)

El-Hinnawi, E

1977-01-01

Energy is one of the most important prerequisites of life. The growing socio-economic activities and the rising standard of living have led to a rapid increase in energy consumption. The limited resources of fossil fuels and the recent geopolitical developments activated the exploration of ways and means for energy conservation and exploitation of unconventional renewable sources of energy. Of the renewable energy sources (geothermal, solar, tidal, hydropower, etc), hydro-power production has some potential environmental effects. Man-made lakes have several physical, biological, geochemical and biogeochemical impacts on the environment both in the area of the lake and downstream. From the socio-economic point of view, the harnessing of renewable sources of energy will not only lead to the enhancement of the human environment, particularly in remote rural areas in developing countries, but will also lead to substantial savings in the use of non-renewable sources of energy.

Renewable energy to the Indian environment

International Nuclear Information System (INIS)

Agarwal, R.K.

2005-12-01

Fossil fuel reserves are diminishing rapidly across the world. Greenhouse gas emissions, climatic changes and global warming have a direct impact on the environment. A secure and accessible supply of energy is very crucial for the sustainability of modern societies. There is an urgent need for a quicker switch over of energy systems from conventional to renewable that are sustainable and can meet the present and projected world energy demand. Renewable energy has a large potential to become the fuel of the future. The present study is aimed to explore such potential and achievements in India. India is expected to have high growth rate in energy demand over the coming years due to its huge population and rapid economic development. The renewable energy prospects/spectrums of India have been highlighted. (author)

The energy-development-environment nexus

International Nuclear Information System (INIS)

Schneider, Bertrand

1992-01-01

Energy is the key factor in tackling two of the major problems now facing humanity: the environment and development. Adequate and appropriate energy supplies are essential to economic and social development, especially for Third World countries, but at the same time energy production and utilization are responsible for much of the damage being done to the environment. As everyone now knows, the combustion of fossil fuels is the main source of greenhouse gases and of the threat to the stability of world climate. Nuclear power, which once seemed an answer to the constantly increasing demand for energy, is now challenged by public opinion in many countries as a result of various nuclear accidents and the problems of processing and storing nuclear waste. So how do we extricate ourselves from the energy environment-development tangle? Clearly, advanced countries have an interest in transferring environment-friendly technologies to developing countries in order to reduce the pollution which puts the global as well as the local environment at risk. The North is, by and large, becoming aware of the choices involved in protecting the environment versus industrial growth and unlimited use of motor vehicles. For the South, these choices are a luxury they can ill afford, given the imperative of rapid development. The solution must be for greater international co-operation, with the North assisting the South (and the former Communist bloc) financially and through transfer of appropriate technologies at affordable cost. Reconciling the environment and development with respect to the energy cycle is a task of fundamental importance for the future. The prime responsibility for this task obviously lies with industries, but action is also required from governments, to enable them to play their part effectively. Advanced countries must demonstrate that development is fully compatible with protecting the environment. They can do so by using market forces, provided that the appropriate

Environment protection and energy politics

International Nuclear Information System (INIS)

Grawe, J.

1993-01-01

The lecture first deals with the aims and legal basis in German and European law of environment protection with regard to energy politics. It then goes to deal with European regulations for environment protection and their effects on the energy supply: Air pollution abatement, tax for the protection of the climate, internalisation of external costs. The following European energy-political measures impinge on environment protection: Sponsored projects, least-cost planning, third-party access to the public electricity supply. The discrepancy between European and national policies can be lessened or resolved by the following means: Harmonisation, subsidiarity principle, and scope for entrepreneurial solutions. (orig.) [de

Energy and environment

International Nuclear Information System (INIS)

Spurny, Z.

1987-01-01

The objectives and the proceedings are presented of the conference ''Energy and the environment'' held in Pardubice, Czechoslovakia, on 9-10 June, 1987. A total of 31 papers were presented; 4 papers were centred on nuclear power: an assessment of the impact of ionizing radiation from power generation on the health of the population and on the environment; an assessment of the impact of the nuclear power plant complex in the Jaslovske Bohunice locality on the environment; an assessment of the impact of the Vychodni Cechy (Eastern Bohemia) plant on the environment; and a paper on the ecological optimization of the landscape during the development of the uranium industry. (J.B.)

Fast ignition: Physics progress in the US fusion energy program and prospects for achieving ignition

International Nuclear Information System (INIS)

Key, M.; Andersen, C.; Cowan, T.

2003-01-01

Fast ignition (FI) has significant potential advantages for inertial fusion energy and it is therefore being studied as an exploratory concept in the US fusion energy program. FI is based on short pulse isochoric heating of pre-compressed DT by intense beams of laser accelerated MeV electrons or protons. Recent experimental progress in the study of these two heating processes is discussed. The goal is to benchmark new models in order to predict accurately the requirements for full-scale fast ignition. An overview is presented of the design and experimental testing of a cone target implosion concept for fast ignition. Future prospects and conceptual designs for larger scale FI experiments using planned high energy petawatt upgrades of major lasers in the US are outlined. A long-term road map for FI is defined. (author)

Comparison of high-energy trapped particle environments at the Earth and Jupiter.

Science.gov (United States)

Jun, Insoo; Garrett, Henry B

2005-01-01

The 'Van Allen belts' of the trapped energetic particles in the Earth's magnetosphere were discovered by the Explorer I satellite in 1958. In addition, in 1959, it was observed that UHF radio emissions from Jupiter probably had a similar source--the Jovian radiation belts. In this paper, the global characteristics of these two planets' trapped radiation environments and respective magnetospheres are compared and state-of-the-art models used to generate estimates of the high-energy electron (> or = 100 keV) and proton (> or = 1 MeV) populations--the dominant radiation particles in these environments. The models used are the AP8/AE8 series for the Earth and the Divine-Garrett/GIRE model for Jupiter. To illustrate the relative magnitude of radiation effects at each planet, radiation transport calculations were performed to compute the total ionising dose levels at the geosynchronous orbit for the Earth and at Europa (Jupiter's 4th largest moon) for Jupiter. The results show that the dose rates are -0.1 krad(Si) d(-1) at the geosynchronous orbit and -30 krad(Si) d((-1) at Europa for a 2.5 mm spherical shell aluminium shield--a factor of -300 between the two planets.

Wind energy renewable energy and the environment

CERN Document Server

Nelson, Vaughn; Nelson, Vaughn

2009-01-01

Due to the mounting demand for energy and increasing population of the world, switching from nonrenewable fossil fuels to other energy sources is not an option-it is a necessity. Focusing on a cost-effective option for the generation of electricity, Wind Energy: Renewable Energy and the Environment covers all facets of wind energy and wind turbines. The book begins by outlining the history of wind energy, before providing reasons to shift from fossil fuels to renewable energy. After examining the characteristics of wind, such as shear, power potential, and turbulence, it discusses the measur

Nuclear energy and environment of China

International Nuclear Information System (INIS)

Zhang Kunmin

1993-01-01

The paper included following contents: China needs to develop nuclear energy; China pays attention to the radiation environment management; the role of China National Environmental Protection Agency in nuclear energy and the environment

Energy, Environment and IMCC

DEFF Research Database (Denmark)

Mogensen, Mogens Bjerg

2012-01-01

This paper gives a brief description of the important role that the ionic and mixed conducting ceramics (IMCC) type of materials will play in the R&D of energy and environment technologies of the - presumably - near future. IMCC materials based technologies for energy harvesting, conversion...... and storage as well as for monitoring and protection of our environment are exemplified. The strong impact of the international IMCC research on development of devices based on such materials is illustrated, and some recent trends in the scientific exploration of IMCC are highlighted. Important groups...

Computing in high-energy physics

International Nuclear Information System (INIS)

Mount, Richard P.

2016-01-01

I present a very personalized journey through more than three decades of computing for experimental high-energy physics, pointing out the enduring lessons that I learned. This is followed by a vision of how the computing environment will evolve in the coming ten years and the technical challenges that this will bring. I then address the scale and cost of high-energy physics software and examine the many current and future challenges, particularly those of management, funding and software-lifecycle management. Lastly, I describe recent developments aimed at improving the overall coherence of high-energy physics software

Computing in high-energy physics

Science.gov (United States)

Mount, Richard P.

2016-04-01

I present a very personalized journey through more than three decades of computing for experimental high-energy physics, pointing out the enduring lessons that I learned. This is followed by a vision of how the computing environment will evolve in the coming ten years and the technical challenges that this will bring. I then address the scale and cost of high-energy physics software and examine the many current and future challenges, particularly those of management, funding and software-lifecycle management. Finally, I describe recent developments aimed at improving the overall coherence of high-energy physics software.

Energy - environment - nutrition

International Nuclear Information System (INIS)

1980-01-01

The special edition contains contributions made by different authors on the array of problems presented by the environment, energy, and nutrition, biosphere and man, economic growth and energy supplies for future security, new environmental awareness, - the end of market economy., power plant safety, conditions for the evolution of mankind, policy and criminal law demonstrated by means of environmental protection. The concept of ecology and the development of world energy supplies are documented. The bibliography report goes into detail as far as studies are concerned which deal with the hazards of nuclear power plants, related pros and cons, with the energy crisis in general, and with nuclear weapons. (HSCH) [de

Energy law and the environment

Energy Technology Data Exchange (ETDEWEB)

Rosemary Lyster; Adrian Bradbrook [University of Sydney, Sydney, NSW (Australia)

2006-08-15

The current unsustainable practices worldwide in energy production and consumption have led to a plethora of environmental problems. Until recently environmental law largely overlooked the relevance of energy production and consumption; energy was seen to be of little significance to the advancement of sustainable development. This has changed since 2000 with the global concern attached to climate change, the publication by the United Nations of the World Energy Assessment and the detailed consideration given to this issue at the World Summit on Sustainable Development in Johannesburg in 2002. Australia has been seen to be lagging behind the other major industrialised nations of the world in addressing sustainable energy issues. Contents are: Overview of energy production and use in Australia; 2. Energy technologies and sustainable development; 3. Energy, international environmental law and sustainable development; 4. Evaluating Australian government initiatives relating to energy, climate change and the environment; 5. Sustainable energy in the Australian electricity and gas sectors; 6. State government initiatives relating to energy and the environment; 7. A sustainable energy law future for Australia. 2 apps.

Energy and environment policies. International Energy Agency

International Nuclear Information System (INIS)

1991-01-01

An analysis is made of how energy policies can be adapted to environmental concerns. The efficiency of measures solving environmental problems is investigated, in particular measures substituting energy carriers, improving energy efficiency rates, postfitting pollution control devices, and applying clean energy technologies. In connection with methods of state control the report deals with questions of taxation and regularization which are to induce the private sector to actively to something for the protection of the environment. (orig.) [de

Wind energy renewable energy and the environment

CERN Document Server

Nelson, Vaughn

2013-01-01

As the demand for energy increases, and fossil fuels continue to decrease, Wind Energy: Renewable Energy and the Environment, Second Edition considers the viability of wind as an alternative renewable energy source. This book examines the wind industry from its start in the 1970s until now, and introduces all aspects of wind energy. The phenomenal growth of wind power for utilities is covered along with applications such as wind-diesel, village power, telecommunications, and street lighting.. It covers the characteristics of wind, such as shear, power potential, turbulence, wind resource, wind

Energy - environment - nutrition. Energie - Umwelt - Ernaehrung

Energy Technology Data Exchange (ETDEWEB)

1980-01-01

The special edition contains contributions made by different authors on the array of problems presented by the environment, energy, and nutrition, biosphere and man, economic growth and energy supplies for future security, new environmental awareness, - the end of market economy., power plant safety, conditions for the evolution of mankind, policy and criminal law demonstrated by means of environmental protection. The concept of ecology and the development of world energy supplies are documented. The bibliography report goes into detail as far as studies are concerned which deal with the hazards of nuclear power plants, related pros and cons, with the energy crisis in general, and with nuclear weapons.

Comparison of high-energy trapped particle environments at the earth and jupiter

International Nuclear Information System (INIS)

Jun, I.; Garrett, H. B.

2005-01-01

The 'Van Allen belts' of the trapped energetic particles in the Earth's magnetosphere were discovered by the Explorer I satellite in 1958. In addition, in 1959, it was observed that UHF radio emissions from Jupiter probably had a similar source - The Jovian radiation belts. In this paper, the global characteristics of these two planets' trapped radiation environments and respective magnetospheres are compared and state-of-the-art models used to generate estimates of the high-energy electron (≥100 keV) and proton ≥1 MeV) populations - The dominant radiation particles in these environments. The models used are the AP8/ AE8 series for the Earth and the Divine-Garrett/GIRE model for Jupiter. To illustrate the relative magnitude of radiation effects at each planet, radiation transport calculations were performed to compute the total ionising dose levels at the geosynchronous orbit for the Earth and at Europa (Jupiter's 4. largest moon) for Jupiter. The results show that the dose rates are ∼0.1 krad(Si) d -1 at the geosynchronous orbit and ∼30 krad(Si) d -1 at Europa for a 2.5 mm spherical shell aluminium shield - a factor of ∼300 between the two planets. (authors)

Energy and the Environment: Volume 24

International Nuclear Information System (INIS)

Socolow, R.H.

1999-01-01

The 24 papers in this volume are entitled: The art of energy efficiency--Protecting the environment with better technology; On the road to global ecology; Best practices for renewable energy implementation--Integrating end-user and commercial-sector opportunities and constraints; Biomass conversion to fuels; Changing trends in greenhouse gases other than carbon dioxide; Economic growth, liberalization, and the environment--A review of the evidence; Harmful algal blooms--A model for emergence of pathogenic microorganisms under conditions of ecological stress; Enhancing the performance of nuclear power reactors--Issues and opportunities; Environmental issues along the US-Mexico border--Drivers of change and the response of citizens and institutions; Ethics and international business; Fuel cells; High-level nuclear waste--The status of Yucca Mountain; Hydrogen production, transmission, and distribution; It's not easy being green--Innovative environmental technologies enhance hydropower's role in sustainable development; Megacities and the atmosphere; Methods for attributing ambient air pollutants to emission sources; Nuclear energy in the twenty-first century--Examination of a contentious subject; Pollution and human health in the St. Lawrence estuary; Southern perspectives in technology transfer; The post-Kyoto regime on climate change--Southern perspectives; Flexibility in the timing and mechanisms of greenhouse gas controls--A review of economic arguments; How much is energy R and D worth as insurance; A review of technical change in assessments of climate policy; and Energy technology and global change--Modeling techniques developed at NASA

Practical neutron dosimetry at high energies

International Nuclear Information System (INIS)

McCaslin, J.B.; Thomas, R.H.

1980-10-01

Dosimetry at high energy particle accelerators is discussed with emphasis on physical measurements which define the radiation environment and provide an immutable basis for the derivation of any quantities subsequently required for risk evaluation. Results of inter-laboratory dosimetric comparisons are reviewed and it is concluded that a well-supported systematic program is needed which would make possible detailed evaluations and inter-comparisons of instruments and techniques in well characterized high energy radiation fields. High-energy dosimetry is so coupled with radiation transport that it is clear their study should proceed concurrently

Nuclear Energy and the Environment.

Science.gov (United States)

International Atomic Energy Agency, Vienna (Austria).

"Nuclear Energy and the Environment" is a pocket folder of removable leaflets concerned with two major topics: Nuclear energy and Nuclear Techniques. Under Nuclear Energy, leaflets concerning the topics of "Radiation--A Fact of Life,""The Impact of a Fact: 1963 Test Ban Treaty,""Energy Needs and Nuclear Power,""Power Reactor Safety,""Transport,"…

Nuclear energy and the environment

Energy Technology Data Exchange (ETDEWEB)

NONE

1971-07-01

Despite a generally excellent history of protecting man and his environment against the harmful effects of radioactive and thermal contamination from the peaceful uses of nuclear energy, civilian nuclear programmes in many countries are beset by a doubting and, in some cases, highly critical reaction from some sections of the public. The genesis and evolution of public controversy over nuclear power were explored in a number of papers presented at general and technical sessions during the Fourth Geneva Conference, and were the subject of a panel discussion on one afternoon. (author)

Energy and environment in Italy

International Nuclear Information System (INIS)

Menna, P.; Capra, M.; D'Acunto, A.; Del Ciello, R.; Molinas, P.; Virdis, M.

2001-01-01

Based upon the more meaningful changing recorded within the Italian energy sector in the year 2000, the Studies Department of ENEA (the Italian National board for new technologies, energy and environment) prepared the 'Rapporto Energia e Ambiente 2000', which provides a picture of the country energy and energy-related activities concerning the environment. In this paper, it is only provided a summary of the whole work. The complete report can be downloaded from the ENEA main page (www.enea.it). Italy gross domestic product (Gdp) grew by almost 3% in the year 2000, mostly sustained by an increase in the industrial production and services, as well. At the same time the total energy consumption rose to almost 185 Mtoe (+1% over 1999). Because Gdp grew more than the energy consumption, the energy intensity decreases in the year 2000. Almost 82% of the Italian energy needs (mainly oil and gas, even if electricity imports are increasing) depend upon imports. This heavy burden makes Italy particularly sensitive to both the oil price fluctuations and the euro/dollar exchange rate. Transportation absorbs a large and growing share of the energy consumption while showing quite an impact on the environment. From the supply side, renewable energy sources appear very promising because they allow the use of local resources, promote local development and may create new jobs, in area of the country with less favourable economic conditions. First among the European countries, a market mechanism to increase the use of renewable by establishing that a share of the whole electricity production (currently set at 2%) has to come from renewable has been introduced. However among the OECD countries, Italy records the lowest rate of R/D investments to GDP. This rate should more than double if the new opportunities coming from the development of innovative energy technologies have to be fully exploited [it

Energy, entropy, environment: Why is protection of the environment objectively difficult?

Energy Technology Data Exchange (ETDEWEB)

Rebane, Karl K [Institute of Physics, Tartu (Estonia)

1995-05-01

Evolution and man`s history indicate that the winners are the species and societies that act faster and consume more high-quality energy and materials: in other words, those which cause more pollution and faster growth of entropy. This could be the reason why protection of the environment is objectively difficult and, in particular, why it is almost impossible to considerably reduce man`s consumption of energy and materials in a world of competition. To escape this fatal evolutionary outcome, fundamentally new thinking is needed, thinking which takes the survival of mankind as the primary value. The role of religion in solving this tremendously difficult task should not be neglected

Energy resources and the environment. [6 essays

Energy Technology Data Exchange (ETDEWEB)

Lenihan, J; Fletcher, W W [eds.

1975-01-01

Exploitation of energy has some impact on the environment. Six essays are presented to examine the variety of problems: (1) Sir Samuel Curran, in Energy and the Needs of Man, concludes that techniques to produce new energy sources will be found, bur conservation and the population explosion must be seriously examined; (2) Dr. Earl Cook, in Flow of Energy Through Technological Society, shows where energy comes from, how it is used and how it returns to the environment; he emphasizes the inefficiency of many energy conversion processes in consequence of the Second law of Thermodynamics; (3) Dr. Andrew Parteous, in Economical Use of Energy and Materials, explains energy not only used in heating, lighting, and transport, but in industry; his accounting of energy shows waste, and he stresses recycling and recovering the energy in domestic waste; (4) Sir Frank McFadzean, in Energy--the International Scene, examines the interplay of economics, technology, and politics in the oil industry; he suggests that more mature international leadership is needed to overcome the current difficulties facing producers and consumers; (5) J. D. Dunster, in The Atom and the Environment, examines the environmental impact of nuclear energy where the safety standards are more strenuous, but are feared more; he is a proponent of nuclear energy, but says an overall energy policy, balancing environmental factors against economic and political considerations, is needed; Dr. B. J. Brinkworth, in Direct Use of Solar Energy, reminds us that the Sun is the ultimate source of energy, and says solar energy can be exploited globally without damaging the environment. (MCW)

Atomic energy, environment and energy conservation in Eastern Europe

International Nuclear Information System (INIS)

Kanno, Koko

1990-01-01

About 12 % of generated electric power is the nuclear power in Eastern European countries. Generally electric power is short in these countries, and as the countermeasures for environment, the promotion of nuclear power generation is considered. However, the public opinion opposing it is also strong. The situation in respective countries is briefly discussed. The prevention of warming of the earth and the reduction of carbon dioxide gas release are the largest environmental problems discussed in western countries, but in Eastern European countries, the far more primitive problem of the damage due to SO 2 is serious. Notwithstanding high sulfur brown coal is the main fuel, the installation of desulfurizing facilities has been neglected. The demand for the countermeasures to environmental pollution by people has become strong. The energy efficiency in Eastern European countries is poor, and it is one of the causes of environmental pollution. The industrial structure is centering around heavy industries which consume much energy, the energy loss arises due to the delay of equipment modernization, and the energy is cheap, so its saving is neglected. Energy conservation is important. (K.I.)

Computing in high energy physics

International Nuclear Information System (INIS)

Hertzberger, L.O.; Hoogland, W.

1986-01-01

This book deals with advanced computing applications in physics, and in particular in high energy physics environments. The main subjects covered are networking; vector and parallel processing; and embedded systems. Also examined are topics such as operating systems, future computer architectures and commercial computer products. The book presents solutions that are foreseen as coping, in the future, with computing problems in experimental and theoretical High Energy Physics. In the experimental environment the large amounts of data to be processed offer special problems on-line as well as off-line. For on-line data reduction, embedded special purpose computers, which are often used for trigger applications are applied. For off-line processing, parallel computers such as emulator farms and the cosmic cube may be employed. The analysis of these topics is therefore a main feature of this volume

Energy and environment design guide

Energy Technology Data Exchange (ETDEWEB)

Harman, K. [Royal Australian Institute of Architects, Canberra, ACT (Australia)

1996-04-01

The Royal Australian Institute of Architects (RAIA) released an Environment Policy for architects in September 1994 which forms part of the RAIA Code of Professional Conduct. Prior to releasing the policy, it was recognised that members needed information and education in the area of energy and environment in order to adopt and implement the guide. This document is a report on the scope, work programme and achievements of a project to provide an easy reference resource for architects and other building designers, and bring together a wide range of information and research. It includes the Environment Policy as an appendix. The project produced 24 notes entitled the `Environment Design Guide - energy/environment notes` covering a wide range of topics, and four newsletters. Feedback received from architects to date indicates that the development of the notes has had a positive effect on their knowledge of these issues, resulting in the making of informed design decisions. The topics covered by the notes are expected to expand in 1996 with the preparation of additional notes which provide information on products and sustainable construction.

Balancing energy and the environment

International Nuclear Information System (INIS)

Anon.

1994-01-01

This paper summarizes the energy policy statement presented by the Queensland Minister for Minerals and Energy for the 'Great Energy Debate' in Brisbane. The Queensland Government is committed to achieving a responsible balance between protecting the environment and meeting community expectations. A broad and integrated framework is under development for guiding energy policies consistent with the market enhancement approach. Some of the recent initiatives and the expected outcome are highlighted

Temporal and spatial distribution of high energy electrons at Jupiter

Science.gov (United States)

Jun, I.; Garrett, H. B.; Ratliff, J. M.

2003-04-01

Measurements of the high energy, omni-directional electron environment by the Galileo spacecraft Energetic Particle Detector (EPD) were used to study the high energy electron environment in the Jovian magnetosphere, especially in the region between 8 to 18 Rj (1 Rj = 1 Jovian radius = 71,400 km). 10-minute averages of the EPD data collected between Jupiter orbit insertion (JOI) in 1995 and the orbit number 33 (I33) in 2002 form an extensive dataset, which has been extremely useful to observe temporal and spatial variability of the Jovian high energy electron environment. The count rates of the EPD electron channels (0.174, 0.304, 0.527, 1.5, 2.0, and 11 MeV) were grouped into 0.5 Rj or 0.5 L bins and analyzed statistically. The results indicate that: (1) a log-normal Gaussian distribution well describes the statistics of the high energy electron environment (for example, electron differential fluxes) in the Jovian magnetosphere, in the region studied here; (2) the high energy electron environments inferred by the Galileo EPD measurements are in a close agreement with the data obtained using the Divine model, which was developed more than 30 years ago from Pioneer 10, 11 and Voyager 1, 2 data; (3) the data are better organized when plotted against magnetic radial parameter L than Rj; (4) the standard deviations of the 0.174, 0.304, 0.527 MeV channel count rates are larger than those of the 1.5, 2.0, 11 MeV count rates in 12 Rj. These observations are very helpful to understand short- and long-term, and local variability of the Jovian high energy electron environment, and are discussed in detail.

An ultra short pulse reconstruction software applied to the GEMINI high power laser system

Energy Technology Data Exchange (ETDEWEB)

Galletti, Mario, E-mail: mario.gall22@gmail.com [INFN – LNF, Via Enrico Fermi 40, 00044 Frascati (Italy); Galimberti, Marco [Central Laser Facility, Rutherford Appleton Laboratory, Didcot (United Kingdom); Hooker, Chris [Central Laser Facility, Rutherford Appleton Laboratory, Didcot (United Kingdom); University of Oxford, Oxford (United Kingdom); Chekhlov, Oleg; Tang, Yunxin [Central Laser Facility, Rutherford Appleton Laboratory, Didcot (United Kingdom); Bisesto, Fabrizio Giuseppe [INFN – LNF, Via Enrico Fermi 40, 00044 Frascati (Italy); Curcio, Alessandro [INFN – LNF, Via Enrico Fermi 40, 00044 Frascati (Italy); Sapienza – University of Rome, P.le Aldo Moro, 2, 00185 Rome (Italy); Anania, Maria Pia [INFN – LNF, Via Enrico Fermi 40, 00044 Frascati (Italy); Giulietti, Danilo [Physics Department of the University and INFN, Pisa (Italy)

2016-09-01

The GRENOUILLE traces of Gemini pulses (15 J, 30 fs, PW, shot per 20 s) were acquired in the Gemini Target Area PetaWatt at the Central Laser Facility (CLF), Rutherford Appleton Laboratory (RAL). A comparison between the characterizations of the laser pulse parameters made using two different types of algorithms: Video Frog and GRenouille/FrOG (GROG), was made. The temporal and spectral parameters came out to be in great agreement for the two kinds of algorithms. In this experimental campaign it has been showed how GROG, the developed algorithm, works as well as VideoFrog algorithm with the PetaWatt pulse class. - Highlights: • Integration of the diagnostic tool on high power laser. • Validation of the GROG algorithm in comparison to a well-known commercial available software. • Complete characterization of the GEMINI ultra-short high power laser pulse.

Energy in Italian regions. Energy environment situation

International Nuclear Information System (INIS)

D'Angelo, E.; Coralli, L.; Porpiglia, V.; Perrella, G.; De Lauretis, R.; Romagnoli, A.; Gomboli, M.

1998-01-01

The aim of this report is to provide a representative picture of the choice regions in energy and environment field. Are singled out the laws and regulations of some regions and concrete territorial applications [it

Energy and global environment

International Nuclear Information System (INIS)

Fyfe, W.S.; Powell, M.A.

1991-01-01

At present about 90% of the world's energy consumption is met by the fossil carbon fuel used in the form of coal, oil and natural gas. This results into release of vast amounts of waste gas CO 2 into the atmosphere posing a threat to the global environment. Moreover this energy source is not sustainable (renewable) and its use amounts to spending Earth's capital resources. The options to this energy source are biomass energy, hydro power, solar energy, geothermal energy and nuclear energy. The potentials, limitations, geological impact and environmental dangers, if any, of these sources are discussed in brief. Energy conservation through energy efficient systems is also one more option. Problems and potential for change to sustainable energy systems with respect to India and Canada are examined. Finally it is pointed out that the ultimate solution to the world's energy problem lies in population control and population reduction. This will make possible for the world to have a sustainable energy system primarily based on solar energy. (M.G.B.). 15 refs

Energy, environment and sustainable development

International Nuclear Information System (INIS)

Omer, Abdeen Mustafa

2008-01-01

Globally, buildings are responsible for approximately 40% of the total world annual energy consumption. Most of this energy is for the provision of lighting, heating, cooling, and air conditioning. Increasing awareness of the environmental impact of CO 2 and NO x emissions and CFCs triggered a renewed interest in environmentally friendly cooling, and heating technologies. Under the 1997 Montreal Protocol, governments agreed to phase out chemicals used as refrigerants that have the potential to destroy stratospheric ozone. It was therefore considered desirable to reduce energy consumption and decrease the rate of depletion of world energy reserves and pollution of the environment. One way of reducing building energy consumption is to design building, which are more economical in their use of energy for heating, lighting, cooling, ventilation and hot water supply. Passive measures, particularly natural or hybrid ventilation rather than air-conditioning, can dramatically reduce primary energy consumption. However, exploitation of renewable energy in buildings and agricultural greenhouses can, also, significantly contribute towards reducing dependency on fossil fuels. Therefore, promoting innovative renewable applications and reinforcing the renewable energy market will contribute to preservation of the ecosystem by reducing emissions at local and global levels. This will also contribute to the amelioration of environmental conditions by replacing conventional fuels with renewable energies that produce no air pollution or greenhouse gases. The provision of good indoor environmental quality while achieving energy and cost-efficient operation of the heating, ventilating and air-conditioning (HVAC) plants in buildings represents a multi-variant problem. The comfort of building occupants is dependent on many environmental parameters including air speed, temperature, relative humidity and quality in addition to lighting and noise. The overall objective is to provide a high

Understanding the physical dynamics and ecological interactions in tidal stream energy environments

Science.gov (United States)

Fraser, Shaun; Williamson, Benjamin J.; Nikora, Vladimir; Scott, Beth E.

2017-04-01

Tidal stream energy devices are intended to operate in energetic physical environments characterised by high flows and extreme turbulence. These environments are often of ecological importance to a range of marine species. Understanding the physical dynamics and ecological interactions at fine scales in such sites is essential for device/array design and to understand environmental impacts. However, investigating fine scale characteristics requires high resolution field measurements which are difficult to attain and interpret, with data often confounded by interference related to turbulence. Consequently, field observations in tidal stream energy environments are limited and require the development of specialised analysis methods and so significant knowledge gaps are still present. The seabed mounted FLOWBEC platform is addressing these knowledge gaps using upward facing instruments to collect information from around marine energy infrastructure. Multifrequency and multibeam echosounder data provide detailed information on the distribution and interactions of biological targets, such as fish and diving seabirds, while simultaneously recording the scales and intensity of turbulence. Novel processing methodologies and instrument integration techniques have been developed which combine different data types and successfully separates signal from noise to reveal new evidence about the behaviour of mobile species and the structure of turbulence at all speeds of the tide and throughout the water column. Multiple platform deployments in the presence and absence of marine energy infrastructure reveal the natural characteristics of high energy sites, and enable the interpretation of the physical and biological impacts of tidal stream devices. These methods and results are relevant to the design and consenting of marine renewable energy technologies, and provide novel information on the use of turbulence for foraging opportunities in high energy sites by mobile species.

Energy and environment. Annual report, 1975

Energy Technology Data Exchange (ETDEWEB)

Barton, R.G.; Lizama, L.R. (eds.)

1976-01-01

Progress is reported on the following programs: geothermal and geosciences; controlled thermonuclear research; chemical processing; instrument development; environment; energy use and conservation; energy analysis; and engineering sciences.

Architecture of petawatt-class z-pinch accelerators

Directory of Open Access Journals (Sweden)

W. A. Stygar

2007-03-01

Full Text Available We have developed an accelerator architecture that can serve as the basis of the design of petawatt-class z-pinch drivers. The architecture has been applied to the design of two z-pinch accelerators, each of which can be contained within a 104-m-diameter cylindrical tank. One accelerator is driven by slow (∼1   μs Marx generators, which are a mature technology but which necessitate significant pulse compression to achieve the short pulses (≪1   μs required to drive z pinches. The other is powered by linear transformer drivers (LTDs, which are less mature but produce much shorter pulses than conventional Marxes. Consequently, an LTD-driven accelerator promises to be (at a given pinch current and implosion time more efficient and reliable. The Marx-driven accelerator produces a peak electrical power of 500 TW and includes the following components: (i 300 Marx generators that comprise a total of 1.8×10^{4} capacitors, store 98 MJ, and erect to 5 MV; (ii 600 water-dielectric triplate intermediate-store transmission lines, which also serve as pulse-forming lines; (iii 600 5-MV laser-triggered gas switches; (iv three monolithic radial-transmission-line impedance transformers, with triplate geometries and exponential impedance profiles; (v a 6-level 5.5-m-diameter 15-MV vacuum insulator stack; (vi six magnetically insulated vacuum transmission lines (MITLs; and (vii a triple-post-hole vacuum convolute that adds the output currents of the six MITLs, and delivers the combined current to a z-pinch load. The accelerator delivers an effective peak current of 52 MA to a 10-mm-length z pinch that implodes in 95 ns, and 57 MA to a pinch that implodes in 120 ns. The LTD-driven accelerator includes monolithic radial transformers and a MITL system similar to those described above, but does not include intermediate-store transmission lines, multimegavolt gas switches, or a laser trigger system. Instead, this accelerator is driven by 210

Nuclear energy and natural environment. Information seminar

International Nuclear Information System (INIS)

1994-01-01

The material of the Jadwisin 93' seminar is the collection 20 of 19 articles discussing aspects of the subject of nuclear energy and natural environment. The lectures were presented at six sessions: 1) Nuclear energy applications in medicine, agriculture, industry, food preservation and protection of the environment; 2) Nuclear power in the world; 3) Public attitudes towards different energy options, the example of Sweden; 4) Nuclear power in neighbouring countries; 5) Radiation and human health; 6) Radioactive waste management and potential serious radiological hazards. The general conclusion of the seminar can be as follows. In some cases the nuclear power is a source of environment pollution but very often nuclear techniques are now used and certainly more often in the future will be used for environment and human health protection

Proceedings of the HEPLIB'92/KEK international users meeting on the support and environments of high energy physics computing

International Nuclear Information System (INIS)

Miura, Yasuko; Amako, Katsuya

1992-07-01

This is the summary of the agreement, conclusion and consensus which were reached at the third HEPLIB users meeting held at the National Laboratory for High Energy Physics (KEK) on June 1 and 2, 1992. 34 scientists from Europe, Japan and USA met for two days to discuss on the support and environment of high energy physics computing. Tele-video conference was held during this meeting with the members at several HEP laboratories in USA, who were not able to attend the meeting in person. This third meeting concluded the first round of meetings in which various HEPLIB proposals were discussed. This summary represents the common viewpoints presented and concluded at the meeting as far as possible. HEPLIB is the world user group for the enhancement, communication and distribution of software primarily for HEP computing environment. Its activities, steering committee, the facility of information exchange and so on are reported. The issues at this meeting were the status of HEPLIB, HEPLIB consensus document, site reports, the subgroups of library structures, HEPLIB compilation and physics generators. The future meetings and workshops were scheduled. (K.I.)

Photosynthetic Energy Storage for the Built Environment: Modeling Energy Generation and Storage for Net-Zero Analysis

Science.gov (United States)

Lichter-Marck, Eli Morris

There is a growing need to address the energy demand of the building sector with non-polluting, renewable energy sources. The Net Zero Energy Building (NZEB) mandate seeks to reduce the impact of building sector energy consumption by encouraging on-site energy generation as a way to offset building loads. However, current approaches to designing on-site generation fail to adequately match the fluctuating load schedules of the built environment. As a result, buildings produce highly variable and often-unpredictable energy import/export patterns that create stress on energy grids and increase building dependence on primary energy resources. This research investigates the potential of integrating emerging photo-electrochemical (PEC) technologies into on-site generation systems as a way to enable buildings to take a more active role in collecting, storing and deploying energy resources according to their own demand schedules. These artificially photosynthetic systems have the potential to significantly reduce variability in hour-to-hour and day-to-day building loads by introducing high-capacity solar-hydrogen into the built environment context. The Building Integrated Artificial Photosynthesis (BIAP) simulation framework presented here tests the impact of hydrogen based energy storage on NZEB performance metrics with the goal of developing a methodology that makes on-site energy generation more effective at alleviating excessive energy consumption in the building sector. In addition, as a design performance framework, the BIAP framework helps guide how material selection and scale up of device design might tie photo-electrochemical devices into parallel building systems to take full advantage of the potential outputs of photosynthetic building systems.

Nuclear energy and the environment

International Nuclear Information System (INIS)

Skjoeldebrand, R.

1994-01-01

The thesis of this paper is that the world will need more energy and not less in the coming decades but that this enormous energy consumption entails dangers to the environment not only locally but regionally and internationally through the emissions from the burning of fossil fuels which now provide 85% of the world's commercial energy supply. The solution to this problem is nuclear power. It does not contribute to global warming. 12 figs

Green energy. Biomass fuels and the environment

International Nuclear Information System (INIS)

1991-01-01

The United Nations Environment Programme has been concerned with energy/environment issues since it was first set up after the United Nations Conference on the Human Environment held in Stockholm in 1972. In the late 1970s, UNEP compiled three comprehensive reports on the the environmental impacts of the production and use of fossil fuels, nuclear energy and renewable energy sources. In 1987 it was decided to update the volume on renewable energy since knowledge of biofuels and their effects on the environment had greatly improved. Among many innovations, Brazil's decision to embark on a major, and now successful, programme to produce ethanol from sugarcane as a substitute vehicle fuel is one of the most significant. At the same time, energy tree crops, agroforestry systems and the use of plantations for environmental improvement have become issues of key importance to sustainable development in developing countries. Biomass fuels, of course, have always been important in terms of the numbers of people who use them; the significant change during the 1980s was that the potential advantages of these fuels took on a new significance in the light of environmental degradation and related issues such as greenhouse warming. The biomass fuels began to be considered as attractive energy sources in their own right - not simply as 'last resort' fuels for developing countries with only limited energy options. While this development may solve some environmental problems, it certainly raises others - the improper utilization of biomass fuels in the past has been responsible for deforestation, desertification and the ill health of many millions of the women in developing countries who use biomass fuels in unventilated huts. These issues currently affect about half of the world population. The new UNEP study was intended to provide an up-to-date evaluation of the environmental issues raised by the use of biomass fuels, and hence to reduce or eliminate their adverse impacts while

Energy, pollution, environment and health

International Nuclear Information System (INIS)

1999-01-01

Many of the major environmental problems of today, such as climate change, air pollution, acidification of lakes and forests, deforestation and desertification, share a common causal factor: energy - its production, transformation and final use. The burning of fossil fuels has already contributed to acidification of lakes and forests, and threatens to alter the world's climate. Traditional open fires cause indoor air pollution, thereby harming the health of women and children in the Third World. In many developing countries, the disappearing forest base is increasingly unable to supply enough wood for energy needs, leading to even greater pressure on forests, which in turn can lead to desertification. Nuclear reactor accidents may release large quantities of radioactive materials, and hydro dams may fail and inundate large areas of land. Indeed, every energy system has some impact on health and the environment, either affecting the same group of people who enjoy the benefits: the exposure of a small group to fumes from a poorly vented common cooking device; or a different group: acid rain in one country caused by the burning of fossil fuels in another, or harm to the health of future generations from today's radioactive nuclear waste. During the past two decades, these energy- environment impacts have become so serious that they may limit further growth of the world's energy economy. Consequently, these problems are now being examined more closely by decision makers throughout the world, as well as by the general public. In addition, it has become clear that energy cannot be viewed in isolation and that pollution, environment and health issues must be integrated into the development of national and international energy policies, so that the adverse impacts of energy can be reduced. To do this, the relationships among different energy systems and their impacts need to be defined clearly. To that end, UNEP has convened conferences on this topic and prepared several

Renewable energies and environment. Energias renovables y medio ambiente

Energy Technology Data Exchange (ETDEWEB)

Dominguez Garrido, U

1994-01-01

This volume summarizes the conferences about ''Energy and environment: renewable energies'' held in Valladolid and sponsored by the Valladolid and Salamanca Universities. The book focusses on the energy consumption, energy laws, wind power, hydroelectric power, environment, biomass, solar thermal energy and their influence into the Energetic National Plan.

Energy and the environment in Eastern Europe

International Nuclear Information System (INIS)

Kramer, J.M.

1991-01-01

This paper reports that three preeminent factors determine the nexus between energy policies and the environment in Eastern Europe. Economic planners in the region traditionally have emphasized supply-side policies to expand the amount, rather than demand-side policies to limit the consumption, of energy. Consequently, the East European economies have developed, in the words of Hungarian economists, an insatiable appetite for fuels and power that engenders among them a persisting propensity to overconsume these resources. All states in the region continue to devote between 40 and 45 percent of their total investments in industry to increase the indigenous production of fuels and power. The quality of the environment suffers considerably from these policies. The more energy an economy consumes (all other things being equal), the more wastes it creates, and so the more it pollutes the environment. Further, the enormous output of fiscal resources that these states devote to increasing their supply of energy severely constrains their capacity to pursue other investment opportunities, including opportunities to protect the environment

International symposium on energy, environment and economics: Transactions

International Nuclear Information System (INIS)

Colville, E.J.

1995-01-01

The conference deals with a comprehensive range of topics on energy sources and technologies, the economic impacts of energy use and production, and environmental issues. The papers are grouped into chapters covering environmental policy, environment education, environment economics, new and renewable energy sources, utilities, electricity and planning software, domestic energy, commercial energy, heat pumps and cogeneration, and transport. A number of un-presented papers and abstracts of contributions are included. Relevant papers are individually indexed/abstracted. Tabs. figs., refs

ASIC design used in high energy physics experiments

International Nuclear Information System (INIS)

Zhang Hongyu; Lin Tao; Wu Ling; Zhao jingwei; Gu Shudi

1997-01-01

The author introduces an ASIC (Application Specific Integrated Circuit) design environment based on PC. Some design tools used in such environment are also introduced. A kind of ASIC chip used in high energy physics experiment, weighting mean timer, is being developed now

Short-pulse optical parametric chirped-pulse amplification for the generation of high-power few-cycle pulses

International Nuclear Information System (INIS)

Major, Zs.; Osterhoff, J.; Hoerlein, R.; Karsch, S.; Fuoloep, J.A.; Krausz, F.; Ludwig-Maximilians Universitaet, Muenchen

2006-01-01

Complete test of publication follows. In the quest for a way to generate ultrashort, high-power, few-cycle laser pulses the discovery of optical parametric amplification (OPA) has opened up to the path towards a completely new regime, well beyond that of conventional laser amplification technology. The main advantage of this parametric amplification process is that it allows for an extremely broad amplification bandwidth compared to any known laser amplifier medium. When combined with the chirped-pulse amplification (CPA) principle (i.e. OPCPA), on one hand pulses of just 10 fs duration and 8 mJ pulse energy have been demonstrated. On the other hand, pulse energies of up to 30 J were also achieved on a different OPCPA system; the pulse duration in this case, however, was 100 fs. In order to combine ultrashort pulse durations (i.e. pulses in the few-cycle regime) with high pulse energies (i.e. in the Joule range) we propose tu pump on OPCPA chain with TW-scale short pulses (100 fs - 1 ps instead of > 100 ps of previous OPCPA systems) delivered by a conventional CPA system. This approach inherently improves the conditions for generating high-power ultrashort pulses using OPCPA in the following ways. Firstly, the short pump pulse duration reduces the necessary stretching factor for the seed pulse, thereby increasing stretching and compression fidelity. Secondly, also due to the shortened pump pulse duration, a much higher contrast is achieved. Finally, the significantly increased pump power makes the use of thinner OPCPA crystals possible, which implies an even broader amplification bandwidth, thereby allowing for even shorter pulses. We carried out theoretical investigations to show the feasibility of such a set-up. Alongside these studies we will also present preliminary experimental results of an OPCPA system pumped by the output of our Ti:Sapphire ATLAS laser, currently delivering 350 mJ in 43 fs. An insight into the planned scaling of this technique to petawatt

Shielding for high energy, high intensity electron accelerator installation

International Nuclear Information System (INIS)

Warawas, C.; Chongkum, S.

1997-03-01

The utilization of electron accelerators (eBA) is gradually increased in Thailand. For instance, a 30-40 MeV eBA are used for tumor and cancer therapy in the hospitals, and a high current eBA in for gemstone colonization. In the near future, an application of eBA in industries will be grown up in a few directions, e.g., flue gases treatment from the coal fire-power plants, plastic processing, rubber vulcanization and food preservation. It is the major roles of Office of Atomic Energy for Peace (OAEP) to promote the peaceful uses of nuclear energy and to regulate the public safety and protection of the environment. By taking into account of radiation safety aspect, high energy electrons are not only harmful to human bodies, but the radioactive nuclides can be occurred. This report presents a literature review by following the National Committee on Radiation Protection and Measurements (NCRP) report No.31. This reviews for parametric calculation and shielding design of the high energy (up to 100 MeV), high intensity electron accelerator installation

Portable energy: autonomy and integration in the human environment; Energie portable: autonomie et integration dans l'environnement humain

Energy Technology Data Exchange (ETDEWEB)

Multon, F; Delamarche, P [Rennes-2 Universite, Lab. de Physiologie et de Biomecanique de l& #x27; Exercice Mulsculaire, UMR. APS, 35 (France); Lucchese, P [CEA Fontenay-aux-Roses, Dir. de la Recherche Technologique, Hydrogene et Pile a Combustible, 92 (France); and others

2002-07-01

This colloquium was motivated by the possibility to recover in our environment the energy produced by our movements, but also the heat emitted and the radiations received by the human body in order to supply the energy needs of portable electronic devices (telephones, micro-computers, watches, prostheses etc..). It tries to answer the different problems raised by the implementation of portable energy sources: the energy resources in the human environment, the physical and technological processes of energy production and storage, the electronic energy conversion and remote transmission means, the intelligent energy management, and the existing and potential applications of these processes. This document brings together 16 communications presented by searchers from various domains (biology, medicine, electrochemistry, computer science, mechanics, thermodynamics, electronics etc..) on the following topics: energy in the human body, possibilities of miniaturization of fuel cells, thermo-mechanical micro-generators, thermoelectric generation, solar cells and autonomy, micro-chargeable batteries, double-layer super-capacitors (principles and electrical behaviour), renewable energies in watches, electro-mechanical devices for the exploitation of human movements energy, trans-dermal power supply, new mechanical-aided systems for blood circulation, problems and their solutions related to portable telephones, low voltage and high efficiency power electronic systems for portable applications, remote energy transmission, intelligent energy management (equipments and softwares), electromagnetic environments and health. (J.S.)

48 CFR 952.223 - Clauses related to environment, energy and water efficiency, renewable energy technologies...

Science.gov (United States)

2010-10-01

... environment, energy and water efficiency, renewable energy technologies, occupational safety, and drug-free workplace. 952.223 Section 952.223 Federal Acquisition Regulations System DEPARTMENT OF ENERGY CLAUSES AND... related to environment, energy and water efficiency, renewable energy technologies, occupational safety...

Environment protection and energy politics

International Nuclear Information System (INIS)

Pernice, I.

1993-01-01

Three aspects make the issue of energy politics and environment protection in the European Community interesting: Questions of competence, international stipulations, and the concrete measures the Community implements or plans in fulfillment of its duty to integrate these two political spheres. At the international level impulses for an environmentally benign energy policy are given by the World Climate Convention, the Agenda 21 passed at the Rio Conference, and by the European Energy Charter and its consequential documents. (orig./HSCH) [de

Low energy current accumulator for high-energy proton rings

International Nuclear Information System (INIS)

Month, M.

1977-01-01

Building current in high-energy p-p colliding beam machines is most appropriately done in a low-energy (small circumference) current accumulator. Three significant factors favor such a procedure: First, large rings tend to be susceptible to unstable longitudinal density oscillations. These can be avoided by pumping up the beam in the accumulator. When the current stack is injected into the storage ring, potentially harmful instability is essentially neutralized. Second, high-field magnets characteristic of future high energy proton rings are designed with superconducting coils within the iron magnetic shield. This means coil construction and placement errors propagate rapidly within the beam aperture. An intermediate ''stacking ring'' allows the minimum use of the superconducting ring aperture. Finally, the coils are vulnerable to radiation heating and possible magnet quenching. By minimizing beam manipulaion in the superconducting environment and using only the central portion of the beam aperture, coil vulnerability can be put at a minimum

Environment and power; Umwelt und Energie

Energy Technology Data Exchange (ETDEWEB)

Franz, W.; Ramser, H.J.; Stadler, M. (eds.)

2006-07-01

Within the scope of the 35th economic seminar with he title '' Environment and power'' held between 18th and 21st September, 2006, at the monastery Ottobeuren (Federal Republic of Germany), the following lectures were held: (a) Environment and power: introduction into the subject matter (Karl Heinrich Opplaender); (b) Theoretical fundamentals of the sustainability (Wolfgang Buchholz); (c) Ecological fiscal reform and double dividend (Ronnie Schoeb); (d) ''My friend, that is all mere theory'' - Notes to the emission trading (Christoph Boehringer); (e) Environmental policy and locational competition (Michael Rauscher); (f) Dynamical incentives of environment political instruments - a survey (Till Requate); (g) Product differentiation in the presence of environmental concern, network effects and compatibility: The automobile market (Klaus Conrad); (h) The liability right as an instrument of environment policy (Alfred Endres); (i) environment economy and experimental evidence (Joachim Weimann); (j) Market design in the energy economy (Felix Muesgen, Axel Ockenfels); (k) Re-regulation of the liberalized energy markets in Europe (Carl Christian von Weizsaecker).

Radiation Fields in High Energy Accelerators and their impact on Single Event Effects

CERN Document Server

García Alía, Rubén; Wrobel, Frédéric; Brugger, Markus

Including calculation models and measurements for a variety of electronic components and their concerned radiation environments, this thesis describes the complex radiation field present in the surrounding of a high-energy hadron accelerator and assesses the risks related to it in terms of Single Event Effects (SEE). It is shown that this poses not only a serious threat to the respective operation of modern accelerators but also highlights the impact on other high-energy radiation environments such as those for ground and avionics applications. Different LHC-like radiation environments are described in terms of their hadron composition and energy spectra. They are compared with other environments relevant for electronic component operation such as the ground-level, avionics or proton belt. The main characteristic of the high-energy accelerator radiation field is its mixed nature, both in terms of hadron types and energy interval. The threat to electronics ranges from neutrons of thermal energies to GeV hadron...

Energy use and the environment

International Nuclear Information System (INIS)

Winteringham, F.P.W.

1992-01-01

A global review is presented with particular reference to energy use, society, environment, resources and the future. The text has been prepared as a course of lectures in scientifically accurate but nontechnical language for the student in general education. The first chapters cover the nature of energy, energy use in the global context and energy technologies, resources and uses. A chapter is devoted to each of the different energy types including fossil-carbon based energy, biomass fuels, alternative energies such as solar, wind, geothermal and water, and nuclear based power. After covering the technical basics, the author moves on to the socioeconomic and environmental impacts of energy use. Topics discussed include: energy, agriculture, forestry and fisheries; global trends, problems and needs; sustainable agriculture, food, water, and environmental quality; and energy use, attitudes, and conservation. Finally, the author looks to the future in discussions on education and peaceful planetary management

Thermal indoor environment and energy consumption in a plus-energy house: cooling season measurements

DEFF Research Database (Denmark)

Kazanci, Ongun Berk; Olesen, Bjarne W.

2015-01-01

indoor environment. For the energy consumption of the HVAC system, air-to-brine heat pump, mixing station and controller of the radiant floor, and the air handling unit were considered. The measurements were analyzed based on the achieved indoor environment category (according to EN 15251...... the floor cooling system) and increasing the ventilation rate provided a better thermal indoor environment but with increased energy consumption. The thermal indoor environment and energy performance of the house can be improved with decreased glazing area, increased thermal mass, installation of solar...

The development of Micromegas for high particle-flux environments

International Nuclear Information System (INIS)

Giomataris, Y.; Mangeot, Ph.; Rebourgeard, Ph.; Robert, J.P.

1996-01-01

Detectors able to operate in high rate environments, with particle flux beyond 10 14 particles/mm 2 /s, are needed for future high energy physics projects and medical radiography. A new promising technique called Micromegas has been proposed. It consists of a 2-stage parallel-plate avalanche chamber of small amplification gap (100 μm) combined with a conversion-drift space. In this paper we present results obtained with such a detector and we see that the detector combines most of the qualities required for high-rate position-sensitive particle detection, particularly it shows excellent spatial and energy resolutions. (author)

Energy forum 92: Efficiency, trade and the environment

Energy Technology Data Exchange (ETDEWEB)

1992-01-01

In 1992 B.C. Hydro's annual Electric Energy Forum was held in conjunction with the National Energy Forum to provide an opportunity for delegates from utilities, government, industry, international development agencies, environmental groups, universities and interested members of the public to discuss major energy issues of today and tomorrow. Three main themes were addressed: Efficiency (the latest developments in energy-efficient technologies and their role in sustainable development), trade (strategies for trade in energy and related technologies), and environment (the effects of energy production, use and trade on the local, regional and global environment). This document presents opening remarks, speeches presented, and panel discussions.

ENERGY-NET (Energy, Environment and Society Learning Network): Best Practices to Enhance Informal Geoscience Learning

Science.gov (United States)

Rossi, R.; Elliott, E. M.; Bain, D.; Crowley, K. J.; Steiner, M. A.; Divers, M. T.; Hopkins, K. G.; Giarratani, L.; Gilmore, M. E.

2014-12-01

While energy links all living and non-living systems, the integration of energy, the environment, and society is often not clearly represented in 9 - 12 classrooms and informal learning venues. However, objective public learning that integrates these components is essential for improving public environmental literacy. ENERGY-NET (Energy, Environment and Society Learning Network) is a National Science Foundation funded initiative that uses an Earth Systems Science framework to guide experimental learning for high school students and to improve public learning opportunities regarding the energy-environment-society nexus in a Museum setting. One of the primary objectives of the ENERGY-NET project is to develop a rich set of experimental learning activities that are presented as exhibits at the Carnegie Museum of Natural History in Pittsburgh, Pennsylvania (USA). Here we detail the evolution of the ENERGY-NET exhibit building process and the subsequent evolution of exhibit content over the past three years. While preliminary plans included the development of five "exploration stations" (i.e., traveling activity carts) per calendar year, the opportunity arose to create a single, larger topical exhibit per semester, which was assumed to have a greater impact on museum visitors. Evaluative assessments conducted to date reveal important practices to be incorporated into ongoing exhibit development: 1) Undergraduate mentors and teen exhibit developers should receive additional content training to allow richer exhibit materials. 2) The development process should be distributed over as long a time period as possible and emphasize iteration. This project can serve as a model for other collaborations between geoscience departments and museums. In particular, these practices may streamline development of public presentations and increase the effectiveness of experimental learning activities.

Energy, economy, and environment analysis and optimization on manufacturing plant energy supply system

International Nuclear Information System (INIS)

Feng, Lujia; Mears, Laine; Beaufort, Cleveland; Schulte, Joerg

2016-01-01

Highlights: • Single objective and multicriteria optimization approaches are proposed. • Objectives of energy, economy, and environment are proved conflicting. • 3-input-5-output energy supply system of an automotive plant is studied. - Abstract: Increasing attention has recently been drawn to energy consumption in manufacturing plants. Facing the challenges from reducing emissions coupled with rising raw material prices and energy costs, manufacturers are trying to balance the energy usage strategy among the total energy consumption, economy, and environment, which can be self-conflicting at times. In this paper, energy systems in manufacturing environments are reviewed, and the current status of onsite energy system and renewable energy usage are discussed. Single objective and multicriteria optimization approaches are effectively formulated for making the best use of energy delivered to the production processes. Energy supply operation suggestions based on the optimization results are obtained. Finally, an example from an automotive assembly manufacturer is described to demonstrate the energy usage in the current manufacturing plants and how the optimization approaches can be applied to satisfy the energy management objectives. According to the optimization results, in an energy oriented operation, it takes 35% more in monetary cost; while in an economy oriented operation, it takes 17% more in megawatt hour energy supply and tends to rely more on the inexpensive renewable energy.

Energy, Transport, & the Environment Addressing the Sustainable Mobility Paradigm

CERN Document Server

King, Sir

2012-01-01

Sustainable mobility is a highly complex problem as it is affected by the interactions between socio-economic, environmental, technological and political issues. Energy, Transport, & the Environment: Addressing the Sustainable Mobility Paradigm brings together leading figures from business, academia and governments to address the challenges and opportunities involved in working towards sustainable mobility. Key thinkers and decision makers approach topics and debates including:   ·         energy security and resource scarcity ·         greenhouse gas and pollutant emissions ·         urban planning, transport systems and their management ·         governance and finance of transformation ·         the threats of terrorism and climate change to our transport systems.   Introduced by a preface from U.S. Secretary Steven Chu and an outline by the editors, Dr Oliver Inderwildi and Sir David King, Energy, Transport, & the Environment is divided into six secti...

High-Temperature Corrosion Behavior of Alloy 617 in Helium Environment of Very High Temperature Gas Reactor

International Nuclear Information System (INIS)

Lee, Gyeong-Geun; Jung, Sujin; Kim, Daejong; Jeong, Yong-Whan; Kim, Dong-Jin

2012-01-01

Alloy 617 is a Ni-base superalloy and a candidate material for the intermediate heat exchanger (IHX) of a very high temperature gas reactor (VHTR) which is one of the next generation nuclear reactors under development. The high operating temperature of VHTR enables various applications such as mass production of hydrogen with high energy efficiency. Alloy 617 has good creep resistance and phase stability at high temperatures in an air environment. However, it was reported that the mechanical properties decreased at a high temperature in an impure helium environment. In this study, high-temperature corrosion tests were carried out at 850°C-950°C in a helium environment containing the impurity gases H_2, CO, and CH_4, in order to examine the corrosion behavior of Alloy 617. Until 250 h, Alloy 617 specimens showed a parabolic oxidation behavior at all temperatures. The activation energy for oxidation in helium environment was 154 kJ/mol. The SEM and EDS results elucidated a Cr-rich surface oxide layer, Al-rich internal oxides and depletion of grain boundary carbides. The thickness and depths of degraded layers also showed a parabolic relationship with time. A normal grain growth was observed in the Cr-rich surface oxide layer. When corrosion tests were conducted in a pure helium environment, the oxidation was suppressed drastically. It was elucidated that minor impurity gases in the helium would have detrimental effects on the high temperature corrosion behavior of Alloy 617 for the VHTR application.

High Energy Density Dielectrics for Pulsed Power Applications

National Research Council Canada - National Science Library

Wu, Richard L; Bray, Kevin R

2008-01-01

This report was developed under a SBIR contract. Aluminum oxynitride (AlON) capacitors exhibit several promising characteristics for high energy density capacitor applications in extreme environments...

Intelligent computing for sustainable energy and environment

Energy Technology Data Exchange (ETDEWEB)

Li, Kang [Queen' s Univ. Belfast (United Kingdom). School of Electronics, Electrical Engineering and Computer Science; Li, Shaoyuan; Li, Dewei [Shanghai Jiao Tong Univ., Shanghai (China). Dept. of Automation; Niu, Qun (eds.) [Shanghai Univ. (China). School of Mechatronic Engineering and Automation

2013-07-01

Fast track conference proceedings. State of the art research. Up to date results. This book constitutes the refereed proceedings of the Second International Conference on Intelligent Computing for Sustainable Energy and Environment, ICSEE 2012, held in Shanghai, China, in September 2012. The 60 full papers presented were carefully reviewed and selected from numerous submissions and present theories and methodologies as well as the emerging applications of intelligent computing in sustainable energy and environment.

HEPLIB '91: International users meeting on the support and environments of high energy physics computing

International Nuclear Information System (INIS)

Johnstad, H.

1991-01-01

The purpose of this meeting is to discuss the current and future HEP computing support and environments from the perspective of new horizons in accelerator, physics, and computing technologies. Topics of interest to the Meeting include (but are limited to): the forming of the HEPLIB world user group for High Energy Physic computing; mandate, desirables, coordination, organization, funding; user experience, international collaboration; the roles of national labs, universities, and industry; range of software, Monte Carlo, mathematics, physics, interactive analysis, text processors, editors, graphics, data base systems, code management tools; program libraries, frequency of updates, distribution; distributed and interactive computing, data base systems, user interface, UNIX operating systems, networking, compilers, Xlib, X-Graphics; documentation, updates, availability, distribution; code management in large collaborations, keeping track of program versions; and quality assurance, testing, conventions, standards

A worldwide perspective on energy, environment and sustainable development

International Nuclear Information System (INIS)

Dincer, Ibrahim; Rosen, Marc A.

1998-01-01

Problems with energy supply and use are related not only to global warming, but also to such environmental concerns as air pollution, ozone depletion forest destruction and emission of radioactive substances. These issues must be taken into consideration simultaneously if humanity is to achieve a bright energy future with minimal environmental impacts. Much evidence exists which suggests that the future will be negatively impacted if humans keep degrading the environment. There is an intimate connection between energy, the environment and sustainable development. A society seeking sustainable development ideally must utilise only energy resources which cause no environmental impact (e.g. which release no emissions to the environment). However, since all energy resources lead to some environmental impact, it is reasonable to suggest that some (not all) of the concerns regarding the limitations imposed on sustainable development by environmental emissions and their negative impacts can be part overcome through increased energy efficiency. A strong relation clearly exists between energy efficiency and environmental impact since, for the same services or products, less resource utilisation and pollution is normally associated with higher efficiency processes. Anticipated patterns of future energy use and consequent environmental impact (Focusing on acid precipitation, stratospheric ozone depletion and the greenhouse effect) are comprehensively discussed in this paper. Also, some solutions to current environmental issues in terms of energy conservation and renewable energy technologies are identified and some theoretical and practical limitations on increased energy efficiency are explained. The relations between energy and sustainable development, and between the environment and sustainable development, are described, and in illustrative example is presented. Throughout the paper several issues relating to energy, environment and sustainable development are examined

The environment and energy sector in the Czech republic

International Nuclear Information System (INIS)

2004-08-01

The objective of this report is to give Danish investors, consultants, and subcontractors With interest in the Czech environment and energy sector, a basis for evaluating its market opportunities. Furthermore, the report will provide the reader With an overview of potential finance sources for projects within the environment and energy sector. With the prospects of EU membership, the Czech Republic has put a great effort into improving the country's environmental conditions as well as restructuring its energy sector. In particular in the area of the environment, the Czech Republic has experienced considerable progress. However, in several environmental areas, the Czech Republic is still lacking behind other EU countries. The process of meeting the environmental standards of the EU continues to demand large investments, especially within the field of water and waste treatment. In the process of adapting to the requirements of the EU in the field of the environment, the Czech Republic can expect to receive around EUR 615 million in EU funds betaveen 2004 and 2006. The Czech energy sector is the most air-polluting sector in the country and there is a general demand for knove-hove and technology in the field of energy efficiency and udlisation of renewable energy. Renewable energy makes up only 2% of the Czech Republic's total energy production. The goal of the Czech government is to increase the share to 8% before 2010. This report illustrates hove the large investments required in the area of environment and energy combmed with a wide range of national and international financing opportunities open up for significant market opportunities in the Czech Republic for Danish companies specialised within the environment and energy sector. As a foundation of the report there will first be a brief explanation of the inarket conditions in the Czech Republic. Secondly, the report will describe the environmental sector in depth within the areas water, waste, and air, and

OMEGA EP: High-energy peta-watt capability for the OMEGA laser facility

Energy Technology Data Exchange (ETDEWEB)

Kelly, J.H.; Waxer, L.J.; Bagnoud, V.; Begishev, I.A.; Bromage, J.; Kruschwitz, B.E.; Kessler, T.J.; Loucks, S.J.; Maywar, D.N.; McCrory, R.L.; Meyerhofer, D.D.; Morse, S.F.B.; Oliver, J.B.; Rigatti, A.L.; Schmid, A.W.; Stoeckl, C.; Dalton, S.; Folnsbee, L.; Guardalben, M.J.; Jungquist, R.; Puth, J.; Shoup III, M.J.; Weiner, D.; Zuegel, J.D. [Rochester Univ., Lab. for Laser Energetics, NY (United States)

2006-06-15

OMEGA EP (Extended Performance) is a peta-watt-class addition to the existing 30-kJ, 60-beam OMEGA Laser Facility at the University of Rochester. When completed, it will consist of four beamlines, each capable of producing up to 6.5 kJ at 351 nm in a 1 to 10 ns pulse. Two of the beamlines will produce up to 2.6 kJ in a pulse-width range of 1 to 100 ps at 1053 nm using chirped-pulse amplification (CPA). This paper reviews both the OMEGA EP performance objectives and the enabling technologies required to meet these goals. (authors)

OMEGA EP: High-energy peta-watt capability for the OMEGA laser facility

International Nuclear Information System (INIS)

Kelly, J.H.; Waxer, L.J.; Bagnoud, V.; Begishev, I.A.; Bromage, J.; Kruschwitz, B.E.; Kessler, T.J.; Loucks, S.J.; Maywar, D.N.; McCrory, R.L.; Meyerhofer, D.D.; Morse, S.F.B.; Oliver, J.B.; Rigatti, A.L.; Schmid, A.W.; Stoeckl, C.; Dalton, S.; Folnsbee, L.; Guardalben, M.J.; Jungquist, R.; Puth, J.; Shoup III, M.J.; Weiner, D.; Zuegel, J.D.

2006-01-01

OMEGA EP (Extended Performance) is a peta-watt-class addition to the existing 30-kJ, 60-beam OMEGA Laser Facility at the University of Rochester. When completed, it will consist of four beamlines, each capable of producing up to 6.5 kJ at 351 nm in a 1 to 10 ns pulse. Two of the beamlines will produce up to 2.6 kJ in a pulse-width range of 1 to 100 ps at 1053 nm using chirped-pulse amplification (CPA). This paper reviews both the OMEGA EP performance objectives and the enabling technologies required to meet these goals. (authors)

Problems of environment pollution in energy production

International Nuclear Information System (INIS)

Soyberk, Oe.

2000-01-01

This publication relates to nuclear fuel cycle and environment, nuclear accidents, risk analysis, test of nuclear weapon, security problems of nuclear power plants, advantages and disadvantages of energy sources, climate variation due to environment pollution

School education on energy and environment problems

International Nuclear Information System (INIS)

Imakita, Manami

2005-01-01

In Japanese school, elementary and junior- and senior-high, it is widely agreed that teaching of energy and environment is desirable, as has been adopted in a course of study of the Ministry of Education, Culture, Sports, Science and Technology. This paper reports the present state of affairs on these problems from elementary schools to high schools, describing of each school year or grade and each lessons separately. It contains the results of the author's investigation on curriculum and syllabus including some classroom practices and measurement of natural radioactivity and radiation with the help of adequate measuring instruments and visits to some related facilities. Methods of learning and teaching are also studied together with some future prospect. (S. Ohno)

High power ultrashort pulse lasers

International Nuclear Information System (INIS)

Perry, M.D.

1994-01-01

Small scale terawatt and soon even petawatt (1000 terawatt) class laser systems are made possible by application of the chirped-pulse amplification technique to solid-state lasers combined with the availability of broad bandwidth materials. These lasers make possible a new class of high gradient accelerators based on the large electric fields associated with intense laser-plasma interactions or from the intense laser field directly. Here, we concentrate on the laser technology to produce these intense pulses. Application of the smallest of these systems to the production of high brightness electron sources is also introduced

Energy, society and environment. Technology for a sustainable future

International Nuclear Information System (INIS)

Elliott, D.

1997-04-01

Energy, Society and Environment examines energy and energy use, and the interactions between technology, society and the environment. The book is clearly structured to examine; Key environmental issues, and the harmful impacts of energy use; New technological solutions to environmental problems; Implementation of possible solutions, and Implications for society in developing a sustainable approach to energy use. Social processes and strategic solutions to problems are located within a clear, technological context with topical case studies. (UK)

Environment and energy in Iceland: A comparative analysis of values and impacts

International Nuclear Information System (INIS)

Thorhallsdottir, Thora Ellen

2007-01-01

Within an Icelandic framework plan for energy, environmental values and impacts were estimated in multicriteria analyses for 19 hydroelectric and 22 geothermal developments. Four natural environment classes were defined (geology + hydrology, species, ecosystems + soils, landscape + wilderness) with cultural heritage as the fifth class. Values and impacts were assessed through 6 agglomerated attributes: richness/diversity, rarity, size/continuity/pristineness, information/symbolic value, international responsibility and visual value. The project offers a unique opportunity for comparing environmental values and impacts within a large sample of sites and energy alternatives treated within a common methodological framework. Total values were higher in hydroelectric than in geothermal areas. Hydroelectric areas scored high for cultural heritage (particularly in rarity and information value), landscape and wilderness. Geothermal areas had high bedrock and hydrological diversity and information values, and a high landscape visual value but little cultural heritage. High values were correlated among some classes of the natural environment, all of which are likely to reflect functional relationships. In contrast, cultural heritage values were not related to natural environment values. Overall, landscape and wilderness had the highest mean value and were also most affected by energy development. Over 40% of the hydroelectric development had a predicted mean impact value of > 4 (out of a maximum of 10), compared with 10% of the geothermal projects. Excluding two outsized hydropower options, there was a significant correlation between plant capacity and impact on geology and hydrology but not with other environmental variables

Energy, environment and technological innovation: Rome 2nd international congress

International Nuclear Information System (INIS)

1992-01-01

From the three volumes containing the proceedings of the October 12-16, 1992 2nd International Congress on Energy, Environment and Technological Innovation held at the University of Rome 'La Sapienza', separate abstracts were prepared for 41 papers. The selection of papers included recent developments and research trends in the following high-tech areas: biomass plantations, wind turbines, photovoltaic power plants, solar architecture, building energy management, global warming, automobile air pollution abatement, district heating with cogeneration, and hydrogen fuels for transportation

The Centres for Environment-friendly Energy Research (FME)

Energy Technology Data Exchange (ETDEWEB)

NONE

2011-07-01

High expectations for Norway's Centres for Environment-friendly Energy Research (FME).The FME centres address a broad range of areas, allcentral to developing the energy sector of the future. The activities of the eight centres established in 2009 focus on renewable energy, raising energy efficiency, energy planning, and carbon capture and storage (CCS). In 2011 three new FME centres were established which focus on social science-related energy research. The FME scheme is a direct follow-up of the broad-based political agreement on climate policy achieved in the Storting in January 2008, and of the national RandD Energi21 strategy submitted in February 2008 to the Ministry of Petroleum and Energy. In April 2008 the Research Council of Norway's Executive Board decided to launch a process to establish centres for environment-friendly energy research, and a funding announcement was issued that same year. In 2010 it was decided that additional FME centres would be established in the field of social science-related energy research. After a thorough assessment of each project (based on feasibility, scientific merit, potential to generate value creation and innovation, and composition of the consortium) eight applicants were selected to become FME centres in February 2009. A new call for proposals was issued in 2010, and three more centres were awarded FME status in February 2011. The objective of the FME scheme is to establish time-limited research centres which conduct concentrated, focused and long-term research of high international calibre in order to solve specific challenges in the energy sphere. The selected centres must exhibit higher goals, a longer-term perspective and a more concentrated focus than is required under other funding instruments for the same scientific area. The make-up of the centres is critical to achieving this objective. The centres bring together Norway's leading research institutions and key players in private enterprise, the

ENERGY EFFICIENT BUILDINGS PROGRAM. CHAPTER FROM THE ENERGY AND ENVIRONMENT DIVISION ANNUAL REPORT 1979

Energy Technology Data Exchange (ETDEWEB)

Authors, Various

1979-12-01

The research reported in this volume was undertaken during FY 1979 within the Energy & Environment Division of the Lawrence Berkeley Laboratory. This volume will comprise a section of the Energy & Environment Division 1979 Annual Report, to be published in the summer of 1980. Work reported relate to: thermal performance of building envelopes; building ventilation and indoor air quality; a computer program for predicting energy use in buildings; study focused specifically on inherently energy intensive hospital buildings; energy efficient windows and lighting; potential for energy conservation and savings in the buildings sector; and evaluation of energy performance standards for residential buildings.

Development, energy, environment: changing the paradigm

International Nuclear Information System (INIS)

2006-01-01

A first set of contributions comments the various risks and challenges which are to be faced in terms of energy, climate and environment: the deadlock of present 'laisser-faire' policies, recent findings in climate science in 2005, oil as the reason of a possible economic crisis in developing countries, recent evolution of energy systems. The next set of contributions discusses the possible solutions and their limits: CO 2 capture and sequestration in coal plants, nuclear renaissance, renewable energies, hydro-electricity, CO 2 capture by biomass, energy sobriety, urban morphology and transports in emerging cities, integration of service demand with energy supply, energy decentralized production

Nuclear energy and the environment

Energy Technology Data Exchange (ETDEWEB)

NONE

1972-07-01

This issue of the Bulletin contains a series of articles discussing various aspects of the interplay between the use of nuclear energy for electricity production, and the acknowledged need to protect the human environment, to conserve natural resources for the benefit of mankind. This article, the keynote to the series, has been contributed by Dr. Glenn T. Seaborg, immediate past Chairman of the United States Atomic Energy Commission and now of the University of California, Berkeley, California. (author)

Energy and environment: Vital challenges of our society

International Nuclear Information System (INIS)

Wagner, B.

1978-01-01

Attempt of report on the present situation of coping with an imminent energy crisis and at the same time saving an environment worth living in with stress being laid on energy policy, economical growth, energy supply and -saving. Without a reasonable extension of the nuclear energy, there won't be sufficient energy basis in the FRG in the future. In the author's opinion, already in the 80ies, economical growth, employment, and living standards will be in danger, to an unjustifiable extent. An evalution of questionnaires on environmental problems shows, among other things, that increasingly more inhabitants of the FRG are ready to make sacrifices for measures of environment protection (in May 77 : 73%). (GL) [de

Radiation environment in the tunnel of a high-energy proton accelerator at energies near 1 TeV

International Nuclear Information System (INIS)

McCaslin, J.B.; Sun, R.K.S.; Swanson, W.P.

1987-12-01

Neutron energy spectra, fluence distributions and rates in the FNAL Tevatron tunnel are summarized. This work has application to radiation damage to electronics and research equipment at high energy accelerators, as well as to radiological protection. 7 refs., 4 figs

Chirped pulse amplification: Present and future

International Nuclear Information System (INIS)

Maine, P.; Strickland, D.; Pessot, M.; Squier, J.; Bado, P.; Mourou, G.; Harter, D.

1988-01-01

Short pulses with ultrahigh peak powers have been generated in Nd: glass and Alexandrite using the Chirped Pulse Amplification (CPA) technique. This technique has been successful in producing picosecond terawatt pulses with a table-top laser system. In the near future, CPA will be applied to large laser systems such as NOVA to produce petawatt pulses (1 kJ in a 1 ps pulse) with focused intensities exceeding 10/sup /plus/21/ W/cm 2 . These pulses will be associated with electric fields in excess of 100 e/a/sub o/ 2 and blackbody energy densities equivalent to 3 /times/ 10 10 J/cm 3 . This petawatt source will have important applications in x-ray laser research and will lead to fundamentally new experiments in atomic, nuclear, solid-state, plasma, and high-energy density physics. A review of present and future designs are discussed. 17 refs., 5 figs

Energy and Environment Division, annual report FY 1980

Energy Technology Data Exchange (ETDEWEB)

Osowitt, M. (ed.)

1981-07-01

This report covers research in: energy analysis; energy efficiency studies; solar energy; chemical process; energy-efficient buildings; environmental pollutant studies; combustion research; laser spectroscopy and trace elements; and oil shale and coal research. An energy and environment personnel listing is appended. Separate projects are indexed individually for the database. (PSB)

Landing Marine-derived Renewable Energy: Optimising Power Cable Routing in the Nearshore Environment

Science.gov (United States)

Turner, Rosalind, ,, Dr.; Keane, Tom; Mullins, Brian; Phipps, Peter

2010-05-01

Numerous studies have demonstrated that a vast unexploited source of energy can be derived from the marine environment. Recent evolution of the energy market and looming EU renewable energy uptake targets for 2020 have driven a huge explosion of interest in exploiting this resource, triggering both governments and industry to move forward in undertaking feasibility assessments and demonstration projects for wave, tidal and offshore wind farms across coastlines. The locations which naturally lend themselves to high yield energy capture, are by definition, exposed and may be remote, located far from the end user of the electricity generated. A fundamental constraint to successfully exploiting these resources will be whether electricity generated in high energy, variable and constantly evolving environments can be brought safely and reliably to shore without the need for constant monitoring and maintenance of the subsea cables and landfall sites. In the case of riverine cable crossings superficial sediments would typically be used to trench and bury the cable. High energy coastal environments may be stripped of soft sediments. Any superficial sediments present at the site may be highly mobile and subject to re-suspension throughout the tidal cycle or under stormy conditions. EirGrid Plc. and Mott MacDonald Ireland Ltd. have been investigating the potential for routing a cable across the exposed Shannon estuary in Ireland. Information regarding the geological ground model, meteo-oceanographic and archaeological conditions of the proposed site was limited, necessitating a clear investigation strategy. The investigation included gathering site information on currents, bathymetry and geology through desk studies, hydrographic and geophysical surveys, an intrusive ground investigation and coastal erosion assessments at the landfall sites. The study identified a number of difficulties for trenching and protecting a cable through an exposed environment such as the Shannon

Multiprocessors for high energy physics

International Nuclear Information System (INIS)

Pohl, M.

1987-01-01

I review the role, status and progress of multiprocessor projects relevant to high energy physics. A short overview of the large variety of multiprocessors architectures is given, with special emphasis on machines suitable for experimental data reconstruction. A lot of progress has been made in the attempt to make the use of multiprocessors less painful by creating a ''Parallel Programming Environment'' supporting the non-expert user. A high degree of usability has been reached for coarse grain (event level) parallelism. The program development tools available on various systems (subroutine packages, preprocessors and parallelizing compilers) are discussed in some detail. Tools for execution control and debugging are also developing, thus opening the path from dedicated systems for large scale, stable production towards support of a more general job mix. At medium term, multiprocessors will thus cover a growing fraction of the typical high energy physics computing task. (orig.)

Small magnetic energy storage systems using high temperature superconductors

International Nuclear Information System (INIS)

Kumar, B.

1991-01-01

This paper reports on magnetic energy storage for power systems that has been considered for commercial utility power, air and ground mobile power sources, and spacecraft applications. Even at the current technology limits of energy storage (100 KJ/Kg*), superconducting magnetic energy storage inductors do not offer a strong advantage over state-of-the-art batteries. The commercial utility application does not have a weight and volume limitation, and is under intense study in several countries for diurnal cycle energy storage and high power delivery. The advent of high temperature superconductors has reduced one of the penalties of superconducting magnetic energy storage in that refrigeration and cryocontainers become greatly simplified. Still, structural and current density issues that limit the energy density and size of superconducting inductors do not change. Cold weather starting of aircraft engines is an application where these limitations are not as significant, and where current systems lack performance. The very cold environments make it difficult to achieve high power densities in state-of-the-art batteries and hydraulically activated starters. The same cold environments make it possible to cool superconducting systems for weeks using a single charge of liquid nitrogen. At the same, the ground carts can handle the size and weight of superconducting magnetic storage (SMES) devices

High frequency energy measurements

International Nuclear Information System (INIS)

Stotlar, S.C.

1981-01-01

High-frequency (> 100 MHz) energy measurements present special problems to the experimenter. Environment or available electronics often limit the applicability of a given detector type. The physical properties of many detectors are frequency dependent and in some cases, the physical effect employed can be frequency dependent. State-of-the-art measurements generally involve a detection scheme in association with high-speed electronics and a method of data recording. Events can be single or repetitive shot requiring real time, sampling, or digitizing data recording. Potential modification of the pulse by the detector and the associated electronics should not be overlooked. This presentation will review typical applications, methods of choosing a detector, and high-speed detectors. Special considerations and limitations of some applications and devices will be described

Energy and environment policies trade-off in the Mediterranean basin

International Nuclear Information System (INIS)

Bilardo, U.; Chello, D.; Scabbia, G.

1998-01-01

Purpose of the National Conference on Energy and Environment is to examine the energy cycle from the environmental, economic and employment standpoints to provide with a new frame of reference all actors concerned. The choice of the Mediterranean Sea as a subject in one of the themes under discussion, apart from being obviously grounded on Italy's central location in it, is explained by the number of critical factors showing in the area; among which energy aspects (as regards energy production, transportation and use), the high level of urbanization of its coasts, impact and conflicts for resource utilisation generated by and between economic activities - agriculture, industry, fisheries, tourism, sea freighting, and so on - and the uniqueness and variety of Mediterranean ecosystems

Energy and environment

International Nuclear Information System (INIS)

Stamenov, J.

2008-01-01

Nuclear energy has a strategic place within the structure of the country’s energy system. The energy transformation technology as well as the extremely high requirements regarding nuclear safety call for the availability of scientific, applied, and operational potential, and for an adequate culture of safe use of nuclear energy. In that aspect, the research reactor as a material base, and its scientific and technical personnel, represent a solid basis for the development of nuclear energy in our country. The acquired scientific experience and qualification in reactor operation are a precondition for the equal in rights participation of the country in the international cooperation and the approaching to the European structures, and assurance of the national interests

X-ray absorption spectroscopy and high-energy XRD study of the local environment of copper in antibacterial copper-releasing degradable phosphate glasses

OpenAIRE

Pickup, David M.; Ahmed, Ifty; Fitzgerald, Victoria; Moss, Rob M.; Wetherall, Karen; Knowles, Jonathan C.; Smith, Mark E.; Newport, Robert J.

2006-01-01

Phosphate-based glasses of the general formula Na2O-CaO-P2O5 are degradable in an aqueous environment, and therefore can act as antibacterial materials through the inclusion of ions such as copper. In this study, CuO and Cu2O were added to Na2O-CaO-P2O5 glasses (1-20 mol% Cu) and X-ray absorption spectroscopy (XAS) and high-energy X-ray diffraction (HEXRD) used to probe the local environment of the copper ions. Copper K-edge X-ray absorption near-edge structure (XANES) spectra confirm the oxi...

Energy and environment: the ecological debate

International Nuclear Information System (INIS)

Blair, I.

1983-01-01

The development of man's use of energy, from earliest times to the present, is briefly sketched. The present energy problem is discussed under three headings: availability of energy (standard of living of developed and developing countries; rate of depletion of non-renewable energy sources with special reference to oil); price (effect on practical availability); environmental pollution (hazards to workers and public; 'greenhouse effect' due to carbon dioxide; radioactivity in the environment due to the operations associated with the use of nuclear power; comparison of hazards associated with oil, coal and nuclear power); response to the energy problem (economy of use of existing energy sources; development of renewable sources; nuclear fusion); what future for industrial society; what is a post-industrial society (sociological and ethical aspects). (U.K.)

Accurate offline dispersion measurement of Petawatt-class chirped pulse amplification compressor and stretcher systems

International Nuclear Information System (INIS)

Haefner, C.; Crane, J.; Halpin, J.; Heebner, J.; Kanz, V.; Phan, H.; Nissen, J.; Shverdin, M.; Hackel, R.; Dawson, J.; Messerly, M.; Siders, C.W.

2010-01-01

Complete text of publication follows. The Advanced Radiographic Capability (ARC) on the National Ignition Facility (NIF) is designed to produce energetic x-rays in the range of 10-100 keV for backlighting NIF targets. ARC will convert 4 of the 192 NIF beamlines into 8 split beams, delivering laser pulses with adjustable pulse durations from 1 ps to 50 ps at the kilo-Joule level. Adjustable time delays between the 8 beams enable X-ray 'motion-picture' capture with tens-of-picosecond resolution during the critical phases of an ICF shot. The precise alignment of stretcher-compressor pairs in energetic chirped pulse amplification (CPA) systems is tedious and requires several iterations using advanced temporal diagnostics until the shortest pulse durations and highest peak intensities are achieved. For large, energetic Petawatt laser systems with beam sizes up to 40 cm, diffraction gratings in the compressor reach meter-scale size and are difficult to precisely align. We developed a group delay diagnostic which enables accurate, offline measurements of highly dispersive components such as stretchers or compressors with sub-picosecond accuracy. This diagnostic tool enables us to simply measure each dispersive component offline, and balance the dispersion in each beamline. Furthermore it allows exactly matching the dispersion of ARC's eight, independent four-grating compressors, which is critical for producing eight identical pulses. ARC utilizes a unique, folded compressor design for maximum compactness; two 5.5 m long vacuum vessels house 8 compressors with 91 cm x 45 cm multilayer, dielectric gratings. The group delay diagnostic utilizes the phase-shift technique for measuring the dispersion characteristics of each individual element, e.g. grating stretcher, chirped fiber Bragg grating, grating compressor, material dispersion, or an entire laser system. The system uses an amplitude modulated, highly-stable, single-frequency laser, which is scanned over the spectral

Solar energy: an environment friendly reliable and sustainable source

International Nuclear Information System (INIS)

Siddique, M.A.; Akhtar, W.

2011-01-01

The rapid enhancement in consumption of fossil fuels in order to meet the day-to day increasing energy requirements has blown a danger sign for all nations. Global warming effect has compelled researchers to discover other techniques of energy generation instead of traditional ways in order to reduce adverse effects on global terrain. Renewable energy resources have got attention of global entrepreneurs due to their long lasting availability and environment friendliness. Solar technology is finding increased application in both domestic and military application. This paper discusses the ideas behind the art of design of solar cells and their historical developments. It also covers the kind of techniques/ methodologies used for solar energy conversion into electrical energy with comparison between different renewable technologies and solar technology. This paper gives the brief review of world energy resources and their consumption v/s Solar energy production percentage. Researchers in the field of energy generation have impressed by the Prodigious results of Renewable Energies. Today's most of the high ranked international universities of developed countries in collaboration with government/ industries have been carrying on advance researches in the field of renewable technologies. (author)

Energy harvesting schemes for building interior environment monitoring

Science.gov (United States)

Zylka, Pawel; Pociecha, Dominik

2016-11-01

A vision to supply microelectronic devices without batteries making them perpetual or extending time of service in battery-oriented mobile supply schemes is the driving force of the research related to ambient energy harvesting. Energy harnessing aims thus at extracting energy from various ambient energy "pools", which generally are cost- or powerineffective to be scaled up for full-size, power-plant energy generation schemes supplying energy in electric form. These include - but are not limited to - waste heat, electromagnetic hum, vibrations, or human-generated power in addition to traditional renewable energy resources like water flow, tidal and wind energy or sun radiation which can also be exploited at the miniature scale by energy scavengers. However, in case of taking advantage of energy harvesting strategies to power up sensors monitoring environment inside buildings adaptable energy sources are restrained to only some which additionally are limited in spatial and temporal accessibility as well as available power. The paper explores experimentally an energy harvesting scheme exploiting human kinesis applicable in indoor environment for supplying a wireless indoor micro-system, monitoring ambient air properties (pressure, humidity and temperature).

Environment and energy

International Nuclear Information System (INIS)

Wirkner, H.; Kneller, P.

1981-01-01

FACIT is a periodical intended to provide the reader with a survey of outstanding publications on topical subjects. At the same time, it offers a first insight into the subject field, enabling the reader to select among the literature cited the publications he may need to enhance his knowledge and information. The periodical is aimed at serving as a guide to the complex variety of publications in a subject field, and to offer information in brief. Vol. 1, Environment and Energy, cites representative statements and samples from the German-language literature in this field and gives hints for further reading. (orig./HSCH) [de

Wave energy transmission apparatus for high-temperature environments

Science.gov (United States)

Buckley, John D. (Inventor); Edwards, William C. (Inventor); Kelliher, Warren C. (Inventor); Carlberg, Ingrid A. (Inventor)

2010-01-01

A wave energy transmission apparatus has a conduit made from a refractory oxide. A transparent, refractory ceramic window is coupled to the conduit. Wave energy passing through the window enters the conduit.

Wind energy in the built environment : Concentrator effects of buildings

NARCIS (Netherlands)

Mertens, S.

2006-01-01

This thesis deals with wind energy conversion in the built environment. It gives a description of the wind resources in the built environment that can be converted into energy by a wind turbine. With a focus on maximum energy yield of the wind turbine, it especially deals with the integration of

Energy and environment: a challenge for materials

International Nuclear Information System (INIS)

Marchand, Ch.; Walle, E.; Hody, St.; Alleau, Th.; Bassat, J.M.; Pourcelly, G.; Aitelli, P.; Crepy, Ch. de; Le Douaron, A.; Moussy, F.; Guibert, A. de; Mogensen, P.C.; Beauvy, M.

2005-01-01

The ESIREM (Ecole Superieure d'Ingenieurs de Recherche en Electronique et en Materiaux) has organized its yearly colloquium in Dijon on the 20. of January 2005. The topic was 'energy and environment: a challenge for materials'. Here are presented the summaries of the speeches of Mr C. Marchand: how to conciliate increasing needs in energy, limited resources in hydrocarbons and to control the releases of greenhouse gases: a main challenge for the 21. century; of Mr E. Walle: materials for the future nuclear systems; of Mr S. Hody: which future prospect for the energy production: the point of view of Gaz de France; of Mr T. Alleau: the hydrogen, the energy of the future; of Mr J.M. Bassat: the specificities of the SOFC, new materials for a carrying out at ambient temperature; of Mr G. Pourcelly: the PEMFC; of Mrs A. Le Douaron and F. Moussy: materials, energy and environment in automotive industry; of Ms A. de Guibert: the key role of materials in the lithium-ion accumulators; of Mr P. C. Mogensen: the photovoltaic materials: the key of the solar energy; and of Mr M. Beauvy: the future reactors: challenges for materials. (O.M.)

The nuclear energy for the environment protection

International Nuclear Information System (INIS)

Souza, Jair A.M. de.

1992-01-01

The environmental question is currently the greater preoccupation all the world, particularly, the atmospheric pollution, generating the acid rains and the heater effect. The transportation, residential, agricultural, industrial and electric sectors contribute for the atmospheric pollution. In this work, the author analyzes important actions in Europe and United States of America in order to reduce this pollution. The paper intends to demystifies that the nuclear energy would be harmful to the environment, demonstrating exactly the contrary - due to the emission cares and controls coming from the nuclear power plants, this source of electric energy generation constitutes is an important factor of environment protection

An energy-economy-environment model for simulating the impacts of socioeconomic development on energy and environment.

Science.gov (United States)

Wang, Wenyi; Zeng, Weihua; Yao, Bo

2014-01-01

Many rapidly developing regions have begun to draw the attention of the world. Meanwhile, the energy and environmental issues associated with rapid economic growth have aroused widespread critical concern. Therefore, studying energy, economic, and environmental systems is of great importance. This study establishes a system dynamic model that covers multiple aspects of those systems, such as energy, economy, population, water pollution, air pollution, solid waste, and technology. The model designed here attempts to determine the impacts of socioeconomic development on the energy and environment of Tongzhou District in three scenarios: under current, planning, and sustainable conditions. The results reveal that energy shortages and water pollutions are very serious and are the key issues constraining future social and economic development. Solid waste emissions increase with population growth. The prediction results provide valuable insights into social advancement.

Sustainable development of energy, water and environment systems

International Nuclear Information System (INIS)

Duić, Neven; Guzović, Zvonimir; Kafarov, Vyatcheslav; Klemeš, Jiří Jaromír; Mathiessen, Brian vad; Yan, Jinyue

2013-01-01

Highlights: ► This special issue of contributions presented at the 6th SDEWES Conference. ► Buildings are becoming energy neutral. ► Process integration enables significant improvements of energy efficiency. ► The electrification of transport and measures to increase its efficiency are needed. ► Renewable energy is becoming more viable while being complicated to integrate. -- Abstract: The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES Conference), attended by 418 scientists from 55 countries representing six continents. It was held in 2011 and dedicated to the improvement and dissemination of knowledge on methods, policies and technologies for increasing the sustainability of development, taking into account its economic, environmental and social pillars, as well as methods for assessing and measuring sustainability of development, regarding energy, transport, water and environment systems and their many combinations.

An Energy-Economy-Environment Model for Simulating the Impacts of Socioeconomic Development on Energy and Environment

Directory of Open Access Journals (Sweden)

Wenyi Wang

2014-01-01

Full Text Available Many rapidly developing regions have begun to draw the attention of the world. Meanwhile, the energy and environmental issues associated with rapid economic growth have aroused widespread critical concern. Therefore, studying energy, economic, and environmental systems is of great importance. This study establishes a system dynamic model that covers multiple aspects of those systems, such as energy, economy, population, water pollution, air pollution, solid waste, and technology. The model designed here attempts to determine the impacts of socioeconomic development on the energy and environment of Tongzhou District in three scenarios: under current, planning, and sustainable conditions. The results reveal that energy shortages and water pollutions are very serious and are the key issues constraining future social and economic development. Solid waste emissions increase with population growth. The prediction results provide valuable insights into social advancement.

Long term energy system analysis of Japan based on 'options for energy and environment' by the energy and environmental council

International Nuclear Information System (INIS)

Hagiwara, Naoto; Kurosawa, Atsushi

2013-01-01

Implications to Japanese energy system are discussed especially in terms of primary energy supply and power generation portfolio, using sensitivity analysis results by an optimization type energy model based on TIMES modeling framework. We updated energy service demand, efficiency in energy conversion and consumption, and power generation costs based on the recent energy policy document called 'Options for Energy and Environment'. The time horizon of the model is 2050. The sensitivity analysis results are presented for 'Three scenarios for 2030' including nuclear phase out scenarios with/without CO 2 emission constraint. The results are compared with 'Options for Energy and Environment'. (author)

International Cooperation and Energy/Environment crisis

International Nuclear Information System (INIS)

Clo, A.

2009-01-01

A combination of old and new tensions led to a new energy crisis. This crisis is very difficult to solve due to the multiple interests and the global and sovranational nature of its interdependent dimensions (economic, political and environmental). In a deep global economic crisis context, the challenges posed to the modern world by energy and the environment have to be faced with the international cooperation and dialogue, as it was in the past. [it

Renewable energy for sustainable development and environment

Energy Technology Data Exchange (ETDEWEB)

Omer, Abdeen

2010-09-15

The increased availability of reliable and efficient energy services stimulates new development alternatives. This article discusses the potential for such integrated systems in the stationary and portable power market in response to the critical need for a cleaner energy technology. Throughout the theme several issues relating to renewable energies, environment and sustainable development are examined from both current and future perspectives. It is concluded that renewable environmentally friendly energy must be encouraged, promoted, implemented and demonstrated by full-scale plan especially for use in remote rural areas.

Bio energy - Environment, technique and market

International Nuclear Information System (INIS)

Hohle, Erik Eid

2001-01-01

Leading abstract. In this book, a group of experts discusses everything about the use of bio fuels, from the briquettes of dry alder used in automobile gas generators during World War II to the most advanced present-day use. The chapters are: (1) Energy and society, (2) Production of biomass, (3) Bio fuel - properties and production, (4) Bio fuel - conversion and use, (5) Environment and environmental engineering, (6) Economy and planning and (7) Bio energy in the energy system of the future. There is a list of literature and a glossary at the end of the book

Energy conservation and the environment: conflict or complement

Energy Technology Data Exchange (ETDEWEB)

Schipper, L.

1978-09-01

The policy discussion following the Oil Embargo was clouded with fears of a return to a primitive existence based on drastically reduced energy inputs to society, or, on the other hand, an abandoning of environmental goals, allegedly a major barrier to development of new energy supplies. Often the energy use associated with environmental improvements was cited as a reason for expanding energy supplies, as if to say that a conflict existed between a clean environment and reductions in energy use. Or it was argued that a relaxation of environmental goals would lower the direct costs of harvesting and using energy and thereby alleviate the need for energy conservation. It has also been argued that the geopolitics of energy alone will force us to substitute riskier or ''dirtier'' energy sources for relatively clean oil and gas. Indeed, there is no question that the relationship among energy, the environment, and economic well-being is complicated. This essay sorts out many of the confusing aspects in order to show how goals relating to the efficient use of energy are aligned both with traditional economic goals and with modern environmental goals. To do this the author analyzes in depth the role of energy in the economy and, using examples, traces the origins of many of the misconceptions about that role--misconceptions that have inhibited a profound discussion of energy-related goals.

P-marking of indoor environment and energy use. Handbook at the prospect of certification of energy use; P-maerkt innemiljoe och energianvaendning. Handbok infoer certifiering av energianvaendning

Energy Technology Data Exchange (ETDEWEB)

Wahlstroem, Aasa

2005-12-15

SP Swedish Testing and Research Institute's P-marking quality assurance scheme for buildings, products, services etc., now includes P-marking of indoor environment and energy use performance in buildings. The rules for the system, which cover new buildings, renovation and existing buildings, are set out in SP's certification rules no. SPCR 114E, specifying requirements in respect of both energy use and indoor environment management. Over the last ten years, SP has carried out considerable work in the field of the indoor environment, resulting in the development of a quality assurance system concentrating on achieving a high quality indoor environment. This quality assurance system has been successfully applied to schools, offices and dwellings. However, the performance of a building is determined not only by a good indoor environment, but also by low impact on the external environment as a result of energy use in the building. In some cases, concentrating on either good indoor environment or energy efficiency may result in an adverse effect on the other aspect, and so the quality assurance system for indoor environments been extended with a section dealing with energy use. This document is a handbook for inspection of documentation concerning quality assurance of energy use (primary energy analysis, determination of energy targets, energy management systems etc.). It can also be helpful when drawing up checklists for the organisation that is applying for P-marking. The book concentrates on requirements for approved certification of energy use in connection with P-marking of indoor environments and energy use in existing buildings: it does not cover requirements for certification of indoor environments. It starts by describing targeting, aims and requirements for P-marking of energy use, followed by presentation of some examples of inspections of collected documentation.

Statistics and predictions of population, energy and environment problems

International Nuclear Information System (INIS)

Sobajima, Makoto

1999-03-01

In the situation that world's population, especially in developing countries, is rapidly growing, humankind is facing to global problems that they cannot steadily live unless they find individual places to live, obtain foods, and peacefully get energy necessary for living for centuries. For this purpose, humankind has to think what behavior they should take in the finite environment, talk, agree and execute. Though energy has been long respected as a symbol for improving living, demanded and used, they have come to limit the use making the global environment more serious. If there is sufficient energy not loading cost to the environment. If nuclear energy regarded as such one sustain the resource for long and has market competitiveness. What situation of realization of compensating new energy is now in the case the use of nuclear energy is restricted by the society fearing radioactivity. If there are promising ones for the future. One concerning with the study of energy cannot go without knowing these. The statistical materials compiled here are thought to be useful for that purpose, and are collected mainly from ones viewing future prediction based on past practices. Studies on the prediction is so important to have future measures that these data bases are expected to be improved for better accuracy. (author)

The Investment Environment for Renewable Energy Development in Lithuania: The Electricity Sector

Directory of Open Access Journals (Sweden)

Milčiuvienė Saulė

2014-06-01

Full Text Available The article analyzes the investment environment in renewable electricity generation capacities, evaluating the credibility of long term renewable energy targets, the stability of promotion schemes and the impartiality of national administrative procedure. The article explores two main questions: (i are the EU and Lithuanian energy policy targets and promotion schemes credible enough to convince private investors to put their money in renewable energy development; (ii does national administrative procedure put a disproportional burden on renewable energy investors or on certain group of investors? The assessment of the investment environment includes a large number of criteria, but we analyze three of them: the stability of long term strategy; the attractiveness of promotionmeasures; and the simplicity and transparency of administrative procedure. Two further criteria are investigated: the stability of targets in renewable energy and the stability of promotional measures. The greatest uncertainty for investors occurs because of constantly changing support schemes of renewable energy sources-schemes that are not harmonized among the member States. At the national level the main driver in the development of small generators is the feed-in tariff. However, the high feed-in tariff does not always guarantee the smooth development of small scale generators of renewable energy.

Proposal for an energy - environment strategy in Romania

International Nuclear Information System (INIS)

Leca, A.; Scripcariu, D.; Scripcariu, M.

1996-01-01

The paper presents the results of a study carried out from a environmental protection point of view by a multi-branch team of 25 Romanian experts. A general block diagram type procedure of elaborating a national energy-environment strategy has been proposed. The sustainable development has been chosen as an overall evaluating criterion involving the fulfillment of the following conditions: the environmental protection; the best use of material, financial and human resources; the promotion of equity. For strategic objectives have been identified: increasing energy efficiency; reconsidering the existing generation capacities and their future trends; diversifying the primary resources and their suppliers; reducing the energy impacts on the environment, and three support objectives: creation of an economic and financial framework market oriented; setting up a regulatory system for efficient market operation; establishing an institutional framework for the energy sector. The fundamental concepts promoted and recommended to be used have been: sustainable development, energy efficiency, competition, integrated resources planning, demand-side management. (author). 2 figs. 4 refs

Collaborative technologies for distributed science: fusion energy and high-energy physics

International Nuclear Information System (INIS)

Schissel, D P; Gottschalk, E E; Greenwald, M J; McCune, D

2006-01-01

This paper outlines a strategy to significantly enhance scientific collaborations in both Fusion Energy Sciences and in High-Energy Physics through the development and deployment of new tools and technologies into working environments. This strategy is divided into two main elements, collaborative workspaces and secure computational services. Experimental and theory/computational programs will greatly benefit through the provision of a flexible, standards-based collaboration space, which includes advanced tools for ad hoc and structured communications, shared applications and displays, enhanced interactivity for remote data access applications, high performance computational services and an improved security environment. The technologies developed should be prototyped and tested on the current generation of experiments and numerical simulation projects. At the same time, such work should maintain a strong focus on the needs of the next generation of mega-projects, ITER and the ILC. Such an effort needs to leverage existing computer science technology and take full advantage of commercial software wherever possible. This paper compares the requirements of FES and HEP, discuss today's solutions, examine areas where more functionality is required, and discuss those areas with sufficient overlap in requirements that joint research into collaborative technologies will increase the benefit to both

Energy-water-environment nexus underpinning future desalination sustainability

KAUST Repository

Shahzad, Muhammad Wakil; Burhan, Muhammad; Ang, Li; Ng, Kim Choon

2017-01-01

Energy-water-environment nexus is very important to attain COP21 goal, maintaining environment temperature increase below 2°C, but unfortunately two third share of CO2 emission has already been used and the remaining will be exhausted by 2050. A

Ultra-short laser pulses. Petawatt and femtosecond

International Nuclear Information System (INIS)

Lemoine, P.

1999-01-01

This book deals with a series of new results obtained thanks to the use of ultra-short laser pulses. This branch of physics has made incredible progresses during the last 25 years. Ultra-short laser pulses offer the opportunity to explore the domain of ultra-high energies and of ultra-short duration events. Applications are various, from controlled nuclear fusion to eye surgery and to more familiar industrial applications such as electronics. (J.S.)

Energy and environment: a primer for scientists and engineers

Energy Technology Data Exchange (ETDEWEB)

Thorndike, E.H.

1976-01-01

The book is written for practicing scientists and engineers and for students to introduce them to the field of energy and the environment; it is concerned with energy and how it affects the Earth's environment and how it affects man. Natural processes (weather and climate and biological systems) and man-made energy processes (such as the generation and distribution of electricity) are discussed. Chapter titles following an introductory chapter are Global Energy Flows; Biological Energy and Ecosystems; Sources of Energy; The Technology of Energy Use; Energy-Related Environmental Problems with five parts (General Considerations, Thermal Pollution, Radioactivity, Air Pollution, and Other Energy-Related Environmental Problems); Energy Use--History and Projections; Energy Conservation and Growth Reduction; and Conclusions and Biased Opinions. Questions are posed at the end of each chapter. Appendixes are entitled: A Short Course in Thermodynamics; A Short Course in Nuclear Physics; Electromagnetic Radiation; Title I of the National Environmental Policy Act of 1969; Units, Conversion Factors, Physical Constants, and Useful Numerical Data; and Answers to Selected Problems. (MCW)

A Review of Solar Energy and the Built Environment

Directory of Open Access Journals (Sweden)

Raha Sulaiman

2005-12-01

Full Text Available Solar Energy has been acknowledged as a free and infinite source of energy. In Built Environment (BE, solar energy has been used since pre-historic time. Many improvements and technologies .have been developed with respect to their potential. As solar supplies free energy, the issues with regard to their development in the BE will be examined. The solar energy is used in building either in Passive Solar Design (PSD or Active Solar Design (ASD. Rapid development in BE has caused global warming effect where the heating and cooling of the building contribute to half the total energy consumption of the nation and the construction industry leading to CO2 emission level at 300 million tonnes. It is found that solar energy produces different energy performances which result from different building technique that affected the environment in various ways. Whether or not the energy performances depend on the materials used, the equipment installed in the building or the energy sources supplied to the building , the improvement and development of solar energy still continues and grows.

Study on development of differential transformer for use in high-temperature environments

International Nuclear Information System (INIS)

Ara, Katsuyuki

1983-11-01

Today, in many fields of industrial science and technology, various efforts are being directed to the development of new technology aiming the technological inovation of the coming generation. Under these circumstances, new requirements are called for in instrumentation and measurement; one is the measurement at very severe environments such as high-temperature and high-pressure. Especially in the field of nuclear energy development, various kinds of measurements are needed under a high-temperature, high-pressure and high-radiation environments, and many sensors have been developed for such purposes. One of the most excellent heat-resisting sensors is the sensor based on and utilizing electromagnetic induction. Various electromagnetic sensors have been, therefore, developed and used in in-core environments of nuclear reactors. The author has been engaged in the development of differential transformers for use in in-core environments of Light Water Reactors: this paper compiles the results obtained through the development. (author)

Strategic environments (SWOT) for nuclear energy innovation in the 21. century

International Nuclear Information System (INIS)

Lee, Tae Joon; Oh, Keun-Bae

2004-01-01

In prospecting the role of nuclear energy in a future society, it is necessary to foresee the social attitudes towards energy, economy and environment, and to analyze their interactions with the exploitation of nuclear energy itself. As those issues, this article looks upon the change of the socio-economic environment, the concerns about nuclear power and eco-environment, and the sustainability and limits of the energy resources, etc. With this perception, the so-called SWOT analysis is employed to identify the internal strengths (S) and/or weaknesses (W) of nuclear energy compared with other energy competitors on the basis of the evaluation of the external factors which are likely to play the roles of opportunities (O) for and/or threats (T) against the technological change in nuclear energy. (authors)

Young people and environment, technology, nuclear energy in France

International Nuclear Information System (INIS)

Bernhardt-Crochet, L.

1995-01-01

Young people have a particular attitude on the questions about environment and energy, and also about technology. Several inquiries show that young people are more aware of environmental questions than their elders. Their anxiety is bigger against pollution than the average of French people and it seems that they are more attentive to dangers for the planet: it is the sign of a broader opening on the world. Young people are ready to adhere to a group or association for environment and have sympathy for ecologists; they have hostility against nuclear energy. Age and education level have to be specified to complicate the question. This contribution gives some elements about the opinion of young people between 15-25 years old on environment, technology and nuclear energy in France. (N.C.)

Energy, economics, environment and politics

International Nuclear Information System (INIS)

Foster, R.J.

1993-01-01

The pressure on the Earth's environment and resources is the ultimate result of population growth and the only humane means available for stabilizing world population is to increase per capita living standards in the developing countries. However, this will require a very large increase in global energy consumption. If, as at present, the energy demand is met largely by fossil fuels, atmospheric concentrations of CO 2 will rise rapidly. Until the end of the century, and perhaps beyond it, any actions to control CO 2 emissions will be taken for precautionary reasons alone, because no reliable basis will exist for predicting their global (or regional) impact on the climate. The sustainability of the natural environment is also under threat from human activities such as the clearing of forests for crop-growing and grazing. The resulting elimination of habitats for, and genetic variability in, the victor is as serious a concern as global warming. The economic and social consequences of rigidly curtailing the growth of energy use in developed countries would be severe, and in developing countries extreme; even then greenhouse gas build up could only be slowed not prevented. On the other hand, a wealthier world would be more able to bear the financial burden of protecting biodiversity. It is concluded that since the developed countries on whom the main cost would have to fall, adequate effort into both biodiversity and greenhouse gas reduction, biodiversity must take procedence. (1 figure, 2 tables). (UK)

Energy expenditure and intake during Special Operations Forces field training in a jungle and glacial environment.

Science.gov (United States)

Johnson, Caleb D; Simonson, Andrew J; Darnell, Matthew E; DeLany, James P; Wohleber, Meleesa F; Connaboy, Christopher

2018-04-01

The purpose of this study was to identify and compare energy requirements specific to Special Operations Forces in field training, in both cool and hot environments. Three separate training sessions were evaluated, 2 in a hot environment (n = 21) and 1 in a cool environment (n = 8). Total energy expenditure was calculated using doubly labeled water. Dietary intake was assessed via self-report at the end of each training mission day, and macronutrient intakes were calculated. Across the 3 missions, mean energy expenditure (4618 ± 1350 kcal/day) exceeded mean energy intake (2429 ± 838 kcal/day) by an average of 2200 kcal/day. Macronutrient intakes (carbohydrates (g/(kg·day body weight (bw)) -1 ) = 3.2 ± 1.2; protein (g/(kg·day bw) -1 ) = 1.3 ± 0.7; fat (g/(kg·day bw) -1 ) = 1.2 ± 0.7) showed inadequate carbohydrate and possibly protein intake across the study period, compared with common recommendations. Total energy expenditures were found to be similar between hot (4664 ± 1399 kcal/day) and cool (4549 ± 1221 kcal/day) environments. However, energy intake was found to be higher in the cool (3001 ± 900 kcal/day) compared with hot (2200 ± 711 kcal/day) environments. Based on the identified energy deficit, high variation in energy expenditures, and poor macronutrient intake, a greater attention to feeding practices during similar training scenarios for Special Operations Forces is needed to help maintain performance and health. The differences in environmental heat stress between the 2 climates/environments had no observed effect on energy expenditures, but may have influenced intakes.

Uncertainty-averse TRANSCO planning for accommodating renewable energy in CO2 reduction environment

DEFF Research Database (Denmark)

Zhang, Chunyu; Ding, Yi; Wang, Qi

2015-01-01

, demand-side variations, market price volatility, and transmission configuration. Three objectives, i.e. social CO2 reduction benefit, energy purchase and network expansion cost and power delivery profit, are optimized simultaneously by a developed two-phase multi-objective particle swarm optimization......The concern of the environment and energy sustainability requests a crucial target of CO2 abatement and results in a relatively high penetration of renewable energy generation in the transmission system. For maintaining system reliability and security, the transmission company (TRANSCO) has to make...

On the nature of intramolecular vibrational energy transfer in dense molecular environments

Energy Technology Data Exchange (ETDEWEB)

Benten, Rebekka S. von [Institut fuer Physikalische Chemie der Universitaet Goettingen, Tammannstrasse 6, D-37077 Goettingen (Germany); Abel, Bernd, E-mail: Bernd.Abel@uni-lepzig.de [Wilhelm-Ostwald-Institut fuer Physikalische und Theoretische Chemie, Universitaet Leipzig, Linne-Strasse 2, D-04103 Leipzig (Germany)

2010-12-09

Graphical abstract: Mechanisms of IVR in multi-tiers of intramolecular energy levels in different molecular environments are investigated. - Abstract: Transient femtosecond-IR-pump-UV-absorption probe-spectroscopy has been employed to shed light on the nature of intramolecular vibrational energy transfer (IVR) in dense molecular environments ranging from the diluted gas phase to the liquid. A general feature in our experiments and those of others is that IVR proceeds via multiple timescales if overtones or combination vibrations of high frequency modes are excited. It has been found that collisions enhance IVR if its (slower) timescales can compete with collisions. This enhancement is, however, much more weaker and rather inefficient as opposed to the effect of collisions on intermolecular energy transfer which is well known. In a series of experiments we found that IVR depends not significantly on the average energy transferred in a collision but rather on the number of collisions. The collisions are much less efficient in affecting IVR than VET. We conclude that collision induced broadening of vibrational energy levels reduces the energy gaps and enhances existing couplings between tiers. The present results are an important step forward to rationalize and understand apparently different and not consistent results from different groups on different molecular systems between gas and liquid phases.

Prospects at high energies

International Nuclear Information System (INIS)

Quigg, C.

1988-11-01

I discuss some possibilities for neutrino experiments in the fixed-target environment of the SPS, Tevatron, and UNK, with their primary proton beams of 0.4, 0.9, and 3.0 TeV. The emphasis is on unfinished business: issues that have been recognized for some time, but not yet resolved. Then I turn to prospects for proton-proton colliders to explore the 1-TeV scale. I review the motivation for new physics in the neighborhood of 1 TeV and mention some discovery possibilities for high-energy, high-luminosity hadron colliders and the implications they would have for neutrino physics. I raise the possibility of the direct study of neutrino interactions in hadron colliders. I close with a report on the status of the SSC project. 38 refs., 17 figs

US National energy policy: conservation and environment

International Nuclear Information System (INIS)

Michna, J.; Bednarz, L.M.

2004-01-01

The paper presents extracts from an extended review devoted to recent changes and current trends in the national energy policy pursued in the USA. In 2001 the President Bush proposed an energy strategy for the period to 2025 that would promote energy conservation, repair and expand energy infrastructure, and increase energy supply while protecting the environment. The material stresses the importance of a sound national energy policy addressing supply, energy distribution and conservation. Well - illustrated data are given on the energy production and consumption (total, per capita, per $, by category, by fuel, etc.) and on the emissions (by sector, by fuel, by region, etc.). Giving an accurate account of the current situation with energy in America and a vision of its development for the first quarter of our century, these data are helpful for analyzing the national energy policies in other countries, post - transitional included. (authors)

Bio energy: Environment and Environmental Engineering

International Nuclear Information System (INIS)

Soma, Morten; Noreng, Katrina; Soerensen, Heidi; Teslo, Einar; Daehlen, Knut; Liodden, Ole Joergen; Wilhelmsen, Gunnar; Hohle, Erik Eid

2001-01-01

This is Chapter 5 of the book ''Bio energy - Environment, technique and market''. Its main sections are: (1) Environmental issues in the use of energy, (2) Environmental issues in the production of biomass, (3) Forestry, (4) Agriculture, (5) Environmental issues in fuel production and storage, (6) Environmental issues in combustion, (7) Environmental issues in using bio fuel, (8) Life cycle analyses, (9) Laws, regulations and norms for the use of bio fuel. Unlike the other sections, the one on laws is mostly concerned with Norwegian conditions

High-energy X-ray diffraction studies of disordered materials

International Nuclear Information System (INIS)

Kohara, Shinji; Suzuya, Kentaro

2003-01-01

With the arrival of the latest generation of synchrotron sources and the introduction of advanced insertion devices (wigglers and undulators), the high-energy (E≥50 keV) X-ray diffraction technique has become feasible, leading to new approaches in the quantitative study of the structure of disordered materials. High-energy X-ray diffraction has several advantages: higher resolution in real space due to a wide range of scattering vector Q, smaller correction terms (especially the absorption correction), reduction of truncation errors, the feasibility of running under extreme environments, including high-temperatures and high-pressures, and the ability to make direct comparisons between X-ray and neutron diffraction data. Recently, high-energy X-ray diffraction data have been combined with neutron diffraction data from a pulsed source to provide more detailed and reliable structural information than that hitherto available

Development, energy, environment: changing the paradigm; Developpement, Energie, Environnement: changer de paradigme

Energy Technology Data Exchange (ETDEWEB)

NONE

2006-07-01

A first set of contributions comments the various risks and challenges which are to be faced in terms of energy, climate and environment: the deadlock of present 'laisser-faire' policies, recent findings in climate science in 2005, oil as the reason of a possible economic crisis in developing countries, recent evolution of energy systems. The next set of contributions discusses the possible solutions and their limits: CO{sub 2} capture and sequestration in coal plants, nuclear renaissance, renewable energies, hydro-electricity, CO{sub 2} capture by biomass, energy sobriety, urban morphology and transports in emerging cities, integration of service demand with energy supply, energy decentralized production

Symposium on Pacific Energy Cooperation '99. Changing economic environment and energy cooperation in Asia

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-16

Compiled in this publication are the papers delivered at the above conference held in Tokyo on February 16-17, 1999. Presented in Session 1, entitled 'economic reforms and energy situation in Asian countries,' are the causes and lessons of economic and financial crisis in the Asian countries and the prospect of restoration; the outlook of energy supply and demand in the Asia Pacific region; and a message from APEC (Asia-Pacific Economic Cooperation Conference) Okinawa Energy Ministers' Meeting. Discussed in Session 2, entitled 'energy security in the Asia Pacific region,' are the outlook for world oil prices; and the stable supply of oil and gas in the Asia Pacific region. Discussed in Session 3, entitled the 'deregulation of the energy sector in the Asia Pacific region,' are the deregulation of the power sector, progress and problems; and the privatization of the oil and gas sectors. Many papers are presented also in Session 4, entitled the 'energy and environment in the Asia Pacific region, and in Session 5 entitled 'pacific energy cooperation in the changing economic and energy environment.' (NEDO)

Advances in energy and environment. Vol. 2: Air quality, water quality

International Nuclear Information System (INIS)

El-Sharkawy, A.L.; Kummler, R.H.

1996-01-01

The 5th conference of energy and environment was held on 3-6 June 1996 in Cairo. The specialists discussed the effects of advances in energy and environment. The applications of solar energy, heat transfer, thermal application, storage and bio-conversion, fuels, energy and development. This second volume covers papers presented on the subjects air pollution, environmental protection, solid and hazardous wastes, water and wastewater treatment. tabs., figs

Does energy-price regulation benefit China's economy and environment? Evidence from energy-price distortions

International Nuclear Information System (INIS)

Ju, Keyi; Su, Bin; Zhou, Dequn; Wu, Junmin

2017-01-01

China's energy prices have long been regulated due to the critical role energy plays in economic growth and social development, which leads to energy-price distortion to some extent. To figure out whether energy-price regulations will benefit China's economy (measured by GDP growth) and environment (measured by carbon emissions), we conducted an in-depth simulation using path analysis, where five energy products (natural gas, gasoline, fuel oil, steam coal, and coking coal) are selected and three measurements (absolute, relative, and moving) of energy-price distortions are calculated. The results indicate that, with a series of energy pricing policies, the price distortion for a single type of energy has gradually transformed, while the energy pricing system in China is not fully market-oriented yet. Furthermore, China's economy benefits from relative and moving distortions, while the absolute distortions of energy prices have negative impacts on economic growth. Finally, with regard to the environment, carbon emissions call for fewer distortions. - Highlights: • Price distortion for a single type of energy has gradually transformed. • Energy pricing system in China is not yet fully market-oriented. • China's economy benefits from relative and moving distortions. • Absolute distortions of energy prices have negative effects on economic growth. • Carbon emissions call for less pricing distortions.

Nuclear energy and environment: abstracts; Energia nuclear y medio ambiente: resumenes

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-07-01

In this meeting on nuclear energy and environment, abstracts on the following subjects were presented: nuclear fuels; materials; radioisotopes and its applications; reactors and nuclear power plants; regulations, energy and environment; radioactive wastes; and analytical techniques.

Prospects of High Energy Laboratory Astrophysics

International Nuclear Information System (INIS)

Ng, Johnny S.T.; SLAC

2006-01-01

Ultra high energy cosmic rays (UHECR) have been observed but their sources and production mechanisms are yet to be understood. We envision a laboratory astrophysics program that will contribute to the understanding of cosmic accelerators with efforts to: (1) test and calibrate UHECR observational techniques, and (2) elucidate the underlying physics of cosmic acceleration through laboratory experiments and computer simulations. Innovative experiments belonging to the first category have already been done at the SLAC FFTB. Results on air fluorescence yields from the FLASH experiment are reviewed. Proposed future accelerator facilities can provided unprecedented high-energy-densities in a regime relevant to cosmic acceleration studies and accessible in a terrestrial environment for the first time. We review recent simulation studies of nonlinear plasma dynamics that could give rise to cosmic acceleration, and discuss prospects for experimental investigation of the underlying mechanisms

Energy harvesting in high voltage measuring techniques

International Nuclear Information System (INIS)

Żyłka, Pawel; Doliński, Marcin

2016-01-01

The paper discusses selected problems related to application of energy harvesting (that is, generating electricity from surplus energy present in the environment) to supply autonomous ultra-low-power measurement systems applicable in high voltage engineering. As a practical example of such implementation a laboratory model of a remote temperature sensor is presented, which is self-powered by heat generated in a current-carrying busbar in HV- switchgear. Presented system exploits a thermoelectric harvester based on a passively cooled Peltier module supplying micro-power low-voltage dc-dc converter driving energy-efficient temperature sensor, microcontroller and a fibre-optic transmitter. Performance of the model in laboratory simulated conditions are presented and discussed. (paper)

The energy-economy-environment interaction and the rebound-effect

NARCIS (Netherlands)

Musters, A.P.A.

1995-01-01

This study examines the Energy-Economy-Environment (3-E) interaction ingeneral and the rebound-effect in particular. The rebound-effect can be defined as that part of the initially expected energy savings, resulting from energy efficiency improvements, that is lost because of the 3-E interaction. To

Policy Enabling Environment for Corporate Renewable Energy Sourcing

Energy Technology Data Exchange (ETDEWEB)

2017-05-09

Interest in renewable energy (RE) procurement in new markets is on the rise. Corporations are increasing their commitments to procuring RE, motivated by an interest in using clean energy sources and reducing their energy expenses. Many large companies have facilities and supply chains in multiple countries, and are interested in procuring renewable energy in the grids where they use energy. The policy environment around the world plays a key role in shaping where and how corporations will invest in renewables. This fact sheet details findings from a recent 21st Century Power Partnership report, Policies to Enable Corporate Renewable Energy Sourcing Internationally.

Resource area environment/energy

International Nuclear Information System (INIS)

1994-01-01

The document comprises a detailed analysis of the business economics of resources related to energy and the environment. Non-domestic and domestic conditions influencing the business economics of this subject area, its infrastructure, problems and future perspectives are dealt with. Tables (amongst other forms of information) indicate the turnover, exports, and numbers of involved employees, workplaces and firms involved in supply, general production, consultancy and production connected with the building sector. The energy sector is the most significant in this respect, giving 30,000 employed (18% in state institutions), a turnover of 63 billion Danish kroner, and with an export of 16 billion Danish kroner. The environmental sector employs 15,000 (29% in the public sector), the total turnover is 20 billion Danish kroner and of this 3 billion Danish kroner is related to export. Many firms are relatively small. A number of firms could compete internationally and this number is growing. (AB) (79 refs.)

Research highlights in energy and eco-efficient built environment

Energy Technology Data Exchange (ETDEWEB)

Airaksinen, M. (ed.)

2012-06-15

This publication presents a compilation of VTT's recent research on energy and eco-efficient built environment. Sustainability as a dominating driver of technology development can also be seen in the R and D portfolio of VTT Technical Research Centre of Finland. A clear focus of our research for the building sector is sustainable construction, particularly the energy efficiency of the built environment. Buildings and the whole built environment are in a key role when societies are mitigating climate change and adapting to its consequences. Despite the temporary economic downturn, construction globally remains one of the most significant areas of human activities globally. Due to the urgency of measures related to climate change and the need to provide a proper environment for living and working, a large number of national and international measures have been agreed to guarantee the future development of sustainable built environment for all. Indirectly, this has lead to a need to develop existing and completely new technologies and processes for the built environment with a speed faster than ever and with a more holistic performance metrics than ever.

Development and first experimental tests of Faraday cup array.

Science.gov (United States)

Prokůpek, J; Kaufman, J; Margarone, D; Krůs, M; Velyhan, A; Krása, J; Burris-Mog, T; Busold, S; Deppert, O; Cowan, T E; Korn, G

2014-01-01

A new type of Faraday cup, capable of detecting high energy charged particles produced in a high intensity laser-matter interaction environment, has recently been developed and demonstrated as a real-time detector based on the time-of-flight technique. An array of these Faraday cups was designed and constructed to cover different observation angles with respect to the target normal direction. Thus, it allows reconstruction of the spatial distribution of ion current density in the subcritical plasma region and the ability to visualise its time evolution through time-of-flight measurements, which cannot be achieved with standard laser optical interferometry. This is a unique method for two-dimensional visualisation of ion currents from laser-generated plasmas. A technical description of the new type of Faraday cup is introduced along with an ad hoc data analysis procedure. Experimental results obtained during campaigns at the Petawatt High-Energy Laser for Heavy Ion Experiments (GSI, Darmstadt) and at the Prague Asterix Laser System (AS CR) are presented. Advantages and limitations of the used diagnostic system are discussed.

Applications of the Los Alamos High Energy Transport code

International Nuclear Information System (INIS)

Waters, L.; Gavron, A.; Prael, R.E.

1992-01-01

Simulation codes reliable through a large range of energies are essential to analyze the environment of vehicles and habitats proposed for space exploration. The LAHET monte carlo code has recently been expanded to track high energy hadrons with FLUKA, while retaining the original Los Alamos version of HETC at lower energies. Electrons and photons are transported with EGS4, and an interface to the MCNP monte carlo code is provided to analyze neutrons with kinetic energies less than 20 MeV. These codes are benchmarked by comparison of LAHET/MCNP calculations to data from the Brookhaven experiment E814 participant calorimeter

Environment. 1980-1994. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

1995-06-01

The catalogue lists all publications of the International Atomic Energy Agency dealing with the Environment issued during the period 1980-1993. The major subjects covered include: effect of agrochemical residues on soils and aquatic ecosystems, application of radioisotopes in conservation of the environment, siting of nuclear power plants, environmental isotope data and environmental contamination due to nuclear accidents

Progress in integrated energy-economy-environment model system development

International Nuclear Information System (INIS)

Yasukawa, Shigeru; Mankin, Shuichi; Sato, Osamu; Tadokoro, Yoshihiro; Nakano, Yasuyuki; Nagano, Takao

1987-11-01

The Integrated Energy-Economy-Environment Model System has been developed for providing analytical tools for the system analysis and technology assessments in the field of nuclear research and development. This model system consists of the following four model groups. The first model block installs 5 models and can serve to analyze and generate long-term scenarios on economy-energy-environment evolution. The second model block installs 2 models and can serve to analyze the structural transition phenomena in energy-economy-environment interactions. The third model block installs 2 models and can handle power reactor installation strategy problem and long-term fuel cycle analysis. The fourth model block installs 5 models and codes and can treats cost-benefit-risk analysis and assessments. This report describes mainly the progress and the outlines of application of the model system in these years after the first report on the research and development of the model system (JAERI-M 84 - 139). (author)

The Swedish dilemma - Nuclear energy v. the environment

International Nuclear Information System (INIS)

Nordhaus, W.D.

1995-11-01

A phaseout of nuclear power in Sweden is supposed to be accomplished by year 2010. This study is an economic analysis of the questions that are parts of the nuclear dilemma. Even though the economic questions are in focus, the important environmental, health and safety questions are also treated. The basic argument is that Sweden should choose an energy system that allows its citizens to maximize their consumption in a long-term perspective. Consumption is here given a meaning that includes elements outside the market, such as environmental, health and safety aspects valued in a reasonable way. Considerations must also be given to international aspects like global environment, a free and open system of trade and the value of a stable set of rules and proprietary rights. The study compares the economic pros and cons of different energy systems within this general frame. A detailed model of the Swedish energy and power sectors was developed for the study, called the Swedish Energy and Environment Policy (SEEP) model. the SEEP model is built on modern economic theory and includes energy and environmental factors in a uniform way. 8 figs 16 tabs

The Swedish dilemma - Nuclear energy v. the environment

Energy Technology Data Exchange (ETDEWEB)

Nordhaus, W D [Yale Univ. (United States)

1995-11-01

A phaseout of nuclear power in Sweden is supposed to be accomplished by year 2010. This study is an economic analysis of the questions that are parts of the nuclear dilemma. Even though the economic questions are in focus, the important environmental, health and safety questions are also treated. The basic argument is that Sweden should choose an energy system that allows its citizens to maximize their consumption in a long-term perspective. Consumption is here given a meaning that includes elements outside the market, such as environmental, health and safety aspects valued in a reasonable way. Considerations must also be given to international aspects like global environment, a free and open system of trade and the value of a stable set of rules and proprietary rights. The study compares the economic pros and cons of different energy systems within this general frame. A detailed model of the Swedish energy and power sectors was developed for the study, called the Swedish Energy and Environment Policy (SEEP) model. the SEEP model is built on modern economic theory and includes energy and environmental factors in a uniform way. 8 figs 16 tabs.

The Swedish Dilemma: Nuclear Energy v. the Environment

International Nuclear Information System (INIS)

Nordhaus, W.D.

1995-01-01

A phaseout of nuclear power in Sweden is supposed to be accomplished by year 2010. This study is an economic analysis of the questions that are parts of the Swedish nuclear dilemma. Even though the economic questions are in focus, the important environmental, health and safety questions are also treated. The basic argument is that Sweden should choose an energy system that allows its citizens to maximize their consumption in a long-term perspective. Consumption is here given a meaning that includes elements outside the market, such as environmental, health and safety aspects valued in a reasonable way. Considerations must also be given to international aspects like global environment, a free and open system of trade and the value of a stable set of rules and proprietary rights. The study compares the economic pros and cons of different energy systems within this general frame. A detailed model of the Swedish energy and power sectors was developed for the study, called the Swedish Energy and Environment Policy (SEEP) model. The SEEP model is built on modern economic theory and includes energy and environmental factors in a uniform way. 51 refs, 36 tabs, 6 figs

Environment-assisted Quantum Critical Effect for Excitation Energy Transfer in a LH2-type Trimer

Science.gov (United States)

Xu, Lan; Xu, Bo

2015-10-01

In this article, we are investigating excitation energy transfer (EET) in a basic unit cell of light-harvesting complex II (LH2), named a LH2-type trimer. Calculation of energy transfer efficiency (ETE) in the framework of non-Markovian environment is also implemented. With these achievements, we theoretically predict the environment-assisted quantum critical effect, where ETE exhibits a sudden change at the critical point of quantum phase transition (QPT) for the LH2-type trimer. It is found that highly efficient EET with nearly unit efficiency may occur in the vicinity of the critical point of QPT.

Energy-environment scenarios for Senegal

Energy Technology Data Exchange (ETDEWEB)

Lazarus, M. [Stockholm Environment Inst. Boston, MA (United States); Diallo, S.; Sokona, Y. [Environment and Development in the Third World, Dakar (Senegal)

1994-06-01

This paper explores the energy and environmental dimensions of proposed energy strategies for Senegal. We do so using a quantitative analytical framework, and begin to explore how useful such numerical methods can be in an African context. Based on past studies and the environmental database system, we develop a set of emission factors for use in Senegal. Finally, we address ways to integrate the often unquantifiable environmental and economics cost and benefits for environmentally informed decision making. In summary, we find that polices intended to promote the substitution of liquid petroleum gas (LPG) for charcoal in households can actually reduce greenhouse gas emissions while contributing to the improvement of more important near-term environmental problems. At the same time, the impacts of LPG substitution on increasing the oil import bill is relatively small when compared to other petroleum product usage.Improving end-use energy efficiency also shows promise, suggesting that new demand-side initiatives are needed. Overall, the integrated energy-environment scenario approach can reveal combined policy impacts that might otherwise be missed in a single project or policy approach. 13 figs, 5 tabs

Role of nuclear produced hydrogen for global environment and energy

International Nuclear Information System (INIS)

Tashimo, M.; Kurosawa, A.; Ikeda, K.

2004-01-01

Sustainability on economical growth, energy supply and environment are major issues for the 21. century. Within this context, one of the promising concepts is the possibility of nuclear-produced hydrogen. In this study, the effect of nuclear-produced hydrogen on the environment is discussed, based on the output of the computer code 'Grape', which simulates the effects of the energy, environment and economy in 21. century. Five cases are assumed in this study. The first case is 'Business as usual by Internal Combustion Engine (ICE)', the second 'CO 2 limited to 550 ppm by ICE', the third 'CO 2 limited to 550 ppm by Hybrid Car', the fourth 'CO 2 limited to 550 ppm by Fuel Cell Vehicle (FCV) with Hydrogen produced by conventional Steam Methane Reforming (SMR)' and the fifth 'CO 2 limited to 550 ppm by FCV with Nuclear Produced-Hydrogen'. The energy used for transportation is at present about 25% of the total energy consumption in the world and is expected to be the same in the future, if there is no improvement of energy efficiency for transportation. On this point, the hybrid car shows the much better efficiency, about 2 times better than traditional internal combustion engines. Fuel Cell powered Vehicles are expected to be a key to resolving the combined issue of the environment and energy in this century. The nuclear-produced hydrogen is a better solution than conventional hydrogen production method using steam methane reforming. (author)

Systems approach to regional energy/environment management

Energy Technology Data Exchange (ETDEWEB)

Foell, W K

1980-08-01

Energy and environmental systems have become a well-established component of national and regional planning and management. The University of Wisconsin, in collaboration with the International Institute for Applied Systems Analysis and other institutions, has over the past several years conducted a number of case studies in which a family of energy/environment models was developed and applied to the assessment of alternative policies. This linked set of models, which treats energy demand, energy supply, and environmental impacts, has provided long-term planning information to a spectrum of public and private institution in the regions studied. The philosophy has been to maintain the flexibility to handle rapid change with innovation. 17 references, 7 figures, 1 table.

Tolerance of the High Energy X-ray Imaging Technology ASIC to potentially destructive radiation processes in Earth-orbit-equivalent environments

Science.gov (United States)

Ryan, D. F.; Baumgartner, W. H.; Wilson, M.; Benmoussa, A.; Campola, M.; Christe, S. D.; Gissot, S.; Jones, L.; Newport, J.; Prydderch, M.; Richards, S.; Seller, P.; Shih, A. Y.; Thomas, S.

2018-02-01

The High Energy X-ray Imaging Technology (HEXITEC) ASIC is designed on a 0.35 μm CMOS process to read out CdTe or CZT detectors and hence provide fine-pixellated spectroscopic imaging in the range 2-200 keV. In this paper, we examine the tolerance of HEXITEC to both potentially destructive cumulative and single event radiation effects. Bare ASICs are irradiated with X-rays up to a total ionising dose (TID) of 1 Mrad (SiO2) and bombarded with heavy ions with linear energy transfer (LET) up to 88.3 MeV mg-1 cm-2. HEXITEC is shown to operate reliably below a TID of 150 krad, have immunity to fatal single event latchup (SEL) and have high tolerance to non-fatal SEL up to LETs of at least 88.3 MeV mg-1 cm-2. The results are compared to predictions of TID and SELs for various Earth-orbits and aluminium shielding thicknesses. It is found that HEXITEC's radiation tolerance to both potentially destructive cumulative and single event effects is sufficient to reliably operate in these environments with moderate shielding.

Energy and environment: A political ecology of woodfuels in Senegal

Science.gov (United States)

Pires, E. Mark

This study examines relationships between energy use and the exploitation of woodland natural resources in the West African nation of Senegal. As in many other countries in the developing world, the majority of the population in Senegal depend on woodfuels, i.e., firewood and charcoal, to satisfy most of their household energy needs. Consequences of this situation include added pressure on the country's limited natural resource base, and increased socioeconomic hardship, particularly for women, as woodfuel resources become increasingly scarce. Woodfuel energy problems in developing countries are typically described in terms of an imbalance between supply and demand that is driven by rapid population growth. However, recent research suggests that a number of other factors should be explored in order to achieve a more thorough understanding of the relationship between woodfuel energy and forest resource management. This study attempts to determine what some of these factors are, and to explain how they inform the energy-environment situation in the case of Senegal. In addition, I examine the scope for addressing Senegal's woodfuel problem through greater local community participation in managing energy and natural resources, a current thrust in many international initiatives designed to help the country cope with this persistent problem. A relatively new conceptual framework for the analysis of human-environment relationships---viz. political ecology---is employed in this study. I attempt to show how political ecology can contribute to the resolution of Senegal's energy-environment dilemma by considering a more inclusive suite of social, economic, political, and environmental variables than has been explored by previous approaches. Findings from the research demonstrate the ability of the political ecology approach to capture many heretofore unexplored factors related to the energy-environment nexus in Senegal. A detailed matrix is generated that illustrates the

Ubiquitous Green Computing Techniques for High Demand Applications in Smart Environments

Directory of Open Access Journals (Sweden)

Jose M. Moya

2012-08-01

Full Text Available Ubiquitous sensor network deployments, such as the ones found in Smart cities and Ambient intelligence applications, require constantly increasing high computational demands in order to process data and offer services to users. The nature of these applications imply the usage of data centers. Research has paid much attention to the energy consumption of the sensor nodes in WSNs infrastructures. However, supercomputing facilities are the ones presenting a higher economic and environmental impact due to their very high power consumption. The latter problem, however, has been disregarded in the field of smart environment services. This paper proposes an energy-minimization workload assignment technique, based on heterogeneity and application-awareness, that redistributes low-demand computational tasks from high-performance facilities to idle nodes with low and medium resources in the WSN infrastructure. These non-optimal allocation policies reduce the energy consumed by the whole infrastructure and the total execution time.

Ubiquitous green computing techniques for high demand applications in Smart environments.

Science.gov (United States)

Zapater, Marina; Sanchez, Cesar; Ayala, Jose L; Moya, Jose M; Risco-Martín, José L

2012-01-01

Ubiquitous sensor network deployments, such as the ones found in Smart cities and Ambient intelligence applications, require constantly increasing high computational demands in order to process data and offer services to users. The nature of these applications imply the usage of data centers. Research has paid much attention to the energy consumption of the sensor nodes in WSNs infrastructures. However, supercomputing facilities are the ones presenting a higher economic and environmental impact due to their very high power consumption. The latter problem, however, has been disregarded in the field of smart environment services. This paper proposes an energy-minimization workload assignment technique, based on heterogeneity and application-awareness, that redistributes low-demand computational tasks from high-performance facilities to idle nodes with low and medium resources in the WSN infrastructure. These non-optimal allocation policies reduce the energy consumed by the whole infrastructure and the total execution time.

Heuristic Scheduling in Grid Environments: Reducing the Operational Energy Demand

Science.gov (United States)

Bodenstein, Christian

In a world where more and more businesses seem to trade in an online market, the supply of online services to the ever-growing demand could quickly reach its capacity limits. Online service providers may find themselves maxed out at peak operation levels during high-traffic timeslots but too little demand during low-traffic timeslots, although the latter is becoming less frequent. At this point deciding which user is allocated what level of service becomes essential. The concept of Grid computing could offer a meaningful alternative to conventional super-computing centres. Not only can Grids reach the same computing speeds as some of the fastest supercomputers, but distributed computing harbors a great energy-saving potential. When scheduling projects in such a Grid environment however, simply assigning one process to a system becomes so complex in calculation that schedules are often too late to execute, rendering their optimizations useless. Current schedulers attempt to maximize the utility, given some sort of constraint, often reverting to heuristics. This optimization often comes at the cost of environmental impact, in this case CO 2 emissions. This work proposes an alternate model of energy efficient scheduling while keeping a respectable amount of economic incentives untouched. Using this model, it is possible to reduce the total energy consumed by a Grid environment using 'just-in-time' flowtime management, paired with ranking nodes by efficiency.

Multi-service highly sensitive rectifier for enhanced RF energy scavenging.

Science.gov (United States)

Shariati, Negin; Rowe, Wayne S T; Scott, James R; Ghorbani, Kamran

2015-05-07

Due to the growing implications of energy costs and carbon footprints, the need to adopt inexpensive, green energy harvesting strategies are of paramount importance for the long-term conservation of the environment and the global economy. To address this, the feasibility of harvesting low power density ambient RF energy simultaneously from multiple sources is examined. A high efficiency multi-resonant rectifier is proposed, which operates at two frequency bands (478-496 and 852-869 MHz) and exhibits favorable impedance matching over a broad input power range (-40 to -10 dBm). Simulation and experimental results of input reflection coefficient and rectified output power are in excellent agreement, demonstrating the usefulness of this innovative low-power rectification technique. Measurement results indicate an effective efficiency of 54.3%, and an output DC voltage of 772.8 mV is achieved for a multi-tone input power of -10 dBm. Furthermore, the measured output DC power from harvesting RF energy from multiple services concurrently exhibits a 3.14 and 7.24 fold increase over single frequency rectification at 490 and 860 MHz respectively. Therefore, the proposed multi-service highly sensitive rectifier is a promising technique for providing a sustainable energy source for low power applications in urban environments.

Economy, energy and environment in the Netherlands, 1980-2000. Economie, energie en milieu in Nederland, 1980-2000

Energy Technology Data Exchange (ETDEWEB)

Driehuis, W; van Ierland, E C; van den Noord, P J

1983-01-01

The CE (Center for Energy conservation) has developed an energy policy plan based on energy conservation (families and industries), total energy systems, intensivation of non fossil energy sources like wind power, solar energy, biogas, geothermal energy and non use of nuclear energy in the Netherlands (CE-scenario). This energy plan is compared with the Netherlands Energy Plan developed for the Broad Public Discussion and meant as unchanged policy (Reference-scenario) and an energy policy plan based on a somewhat different energy plan with a somewhat lower aggregation level based on the same starting points. A summary is given of the data of the Reference-scenario, the basic projection and the CE-scenario. Among others the data refer to the Netherlands' energy consumption in million ton oil equivalents MTOE, welfare, unemployment and environment indicators. As environment indicators are summed up sulfur dioxide, nitrogen oxides and radioactive waste.

Economy, energy and environment - Methods to analyze connections

International Nuclear Information System (INIS)

Ahlroth, Sofia; Finnveden, Goeran; Hochschorner Elisabeth; Ekvall, Thomas; Wadeskog, Anders; Palm, Viveka

2003-12-01

This report gives a review of instruments that can be used for finding economic, structural and environmental effects of decisions in the environmental area, and describe what is possible to achieve, economically and technically. Twelve different aspects are used for characterizing the instruments. Applications and limitations of the instruments are discussed. For many instruments there exists a lively discussion on their weaknesses and limitations. We focus on system analytical instruments, i.e. environment-economic methods, energy and energy-economic modelling and environment-system-analytical tools In the economic area we discuss I/O-analyses, CGE-models and econometric models as well as a few descriptive analytica tools: Cost-benefit analysis, CBA and Life Cycle Analyses.

Renewable energy sources project appraisal under uncertainty: the case of wind energy exploitation within a changing energy market environment

International Nuclear Information System (INIS)

Venetsanos, K.; Angelopoulou, P.; Tsoutsos, T.

2002-01-01

There are four elements, which contribute to the oncoming increase of electricity demand: climate changes, the expected growth rates of EU Member State economies, changes in the consumption patterns and the introduction of new technologies. The new deregulated Electricity Market is expected to respond to this challenge and the energy supply will be adequate and cost effective within this new environment which offers promising opportunities for power producers both existing and newcomers. In this paper a framework for the appraisal of power projects under uncertainty within a competitive market environment is identified, focusing on the electricity from Renewable Energy Sources. To this end the wind energy-to-electricity, production in Greece will serve as a case study. The subject matter is centred on the following areas: the uncertainties within the new deregulated energy market; the evaluation methods including an analysis of the introduced uncertainties after deregulation and a new approach to project evaluation using the real options, as well as comparison of the valuation methodologies within the new environment drawing from the case for Greece. (author)

Guidelines for DOE Long Term Civilian Research and Development. Volume III. Basic Energy Sciences, High Energy and Nuclear Physics

International Nuclear Information System (INIS)

1985-12-01

The Research Panel prepared two reports. This report reviews the Department of Energy's Basic Energy Sciences, High Energy Physics, and Nuclear Physics programs. The second report examines the Environment, Health and Safety programs in the Department. This summary addresses the general value and priority of basic research programs for the Department of Energy and the nation. In addition, it describes the key strategic issues and major recommendations for each program area

Proceedings of the 8. Brazilian congress on energy: energy policy, regulation and sustainable development. v. 1: energy, environment and energy sector regulation

International Nuclear Information System (INIS)

1999-01-01

The theme energy policy, regulation and sustainable development chosen for the 8. Brazilian congress on energy to be held in Rio de Janeiro from 30 November of 1999 to 02 December of 1999, specifically means the contribution of energy to a satisfactory quality of life for everyone. Within such a context, the congress technical programme theme has been structured around six different divisions: energy, environment and development; energy sector regulation; energy policy and planning; technology innovation; energy conservation; and renewable energy sources and rural areas energy supply

High-energy charged particles in space at one astronomical unit

International Nuclear Information System (INIS)

Feynman, J.; Gabriel, S.B.

1996-01-01

Single-event effects and many other spacecraft anomalies are caused by positively charged high-energy particles impinging on the vehicle and its component parts. Here, the authors review the current knowledge of the interplanetary particle environment in the energy ranges that are most important for these effects. State-of-the-art engineering models are described briefly along with comments on the future work required in this field

Energy and Environment : volume 1

OpenAIRE

ANDRE, Michel; SAMARAS, Zissis; JACOB, Bernard

2016-01-01

This book is part of a set of six books called the 'Research for Innovative Transports' set. This collection presents an update of the latest academic and applied research, case studies, best practices and user perspectives on transport carried out in Europe and worldwide. The volumes are made up of a selection of the best papers presented at TRA2014. In this volume 1, recent research works are reported around the triptych : 'transport, energy and environment', which demonstrates that vehicl...

High-energy solar flare observations at the Y2K maximum

Science.gov (United States)

Emslie, A. Gordon

2000-04-01

Solar flares afford an opportunity to observe processes associated with the acceleration and propagation of high-energy particles at a level of detail not accessible in any other astrophysical source. I will review some key results from previous high-energy solar flare observations, including those from the Compton Gamma-Ray Observatory, and the problems that they pose for our understanding of energy release and particle acceleration processes in the astrophysical environment. I will then discuss a program of high-energy observations to be carried out during the upcoming 2000-2001 solar maximum that is aimed at addressing and resolving these issues. A key element in this observational program is the High Energy Solar Spectroscopic Imager (HESSI) spacecraft, which will provide imaging spectroscopic observations with spatial, temporal, and energy resolutions commensurate with the physical processes believed to be operating, and will in addition provide the first true gamma-ray spectroscopy of an astrophysical source. .

High-Tech Means High-Efficiency: The Business Case for EnergyManagement in High-Tech Industries

Energy Technology Data Exchange (ETDEWEB)

Shanshoian, Gary; Blazek, Michele; Naughton, Phil; Seese, RobertS.; Mills, Evan; Tschudi, William

2005-11-15

In the race to apply new technologies in ''high-tech'' facilities such as data centers, laboratories, and clean rooms, much emphasis has been placed on improving service, building capacity, and increasing speed. These facilities are socially and economically important, as part of the critical infrastructure for pharmaceuticals,electronics, communications, and many other sectors. With a singular focus on throughput, some important design issues can be overlooked, such as the energy efficiency of individual equipment (e.g., lasers, routers and switches) as well as the integration of high-tech equipment into the power distribution system and the building envelope. Among technology-based businesses, improving energy efficiency presents an often untapped opportunity to increase profits, enhance process control,maximize asset value, improve the work place environment, and manage a variety of business risks. Oddly enough, the adoption of energy efficiency improvements in this sector lags behind many others. As a result, millions of dollars are left on the table with each year ofoperation.

Energy and environment: for harmonization of 3E's. Energy, environment and economies

International Nuclear Information System (INIS)

Fujime, Kazuya

1996-01-01

When the future society of Asian countries is considered, three points of view have to be taken into account. As to energy security, the rate of oil self-supply in this region, which is 45% now, is expected to decrease, and oil import will be required. As to environmental protection, the increase of energy consumption results in the increase of pollutant emission which causes acid rain, global warming and so on. Economic development involves the expansion of energy consumption, the lowering of energy supply stability, and the increase of harmful gas emission. It partly depends on policy administration whether the three Es described above can be brought into well balanced harmony. In Asia, it is essential to transfer technologies from industrialized nations to developing countries. The problems of sulfur oxides and carbon dioxide are discussed. The harmonization of the three Es should be carried out at the regional level of whole Asia through international cooperation. The dependence on coal in total energy demand is as high as 60% in East Asia. Long term energy supply/demand outlooks for East Asian countries and the positioning of coal, and coal-related environmental measures are reported. (K.I.)

Radiation effects on materials in high-radiation environments

International Nuclear Information System (INIS)

Weber, W.J.; Mansur, L.K.; Clinard, F.W. Jr.; Parkin, D.M.

1991-01-01

A workshop on Radiation Effects on Materials in High-Radiation Environments was held in Salt Lake City, Utah (USA) from August 13 to 15, 1990 under the auspices of the Division of Materials Sciences, Office of Basic Energy Sciences, US Department of Energy. The workshop focused on ceramics, alloys, and intermetallics and covered research needs and capabilities, recent experimental data, theory, and computer simulations. It was concluded that there is clearly a continuing scientific and technological need for fundamental knowledge on the underlying causes of radiation-induced property changes in materials. Furthermore, the success of many current and emerging nuclear-related technologies critically depend on renewed support for basic radiation-effects research, irradiation facilities, and training of scientists. The highlights of the workshop are reviewed and specific recommendations are made regarding research needs. (orig.)

Chemistry, sun, energy and environment; Chimie, soleil, energie et environnement

Energy Technology Data Exchange (ETDEWEB)

Bouchy, M. [Ecole Nationale Superieure des Industries Chimiques (ENSIC), 54 - Villers-les-Nancy (France); Enea, O. [Poitiers Univ., 86 (France); Flamant, G. [IMP-Odeillo-CNRS (France)] (and others)

2000-07-01

This document provides the 35 papers presented at the 'Chemistry, Sun, Energy and Environment' meeting, held February 3-4, 2000 in Saint-Avold, France. The main studied topic was the use of solar radiation for water treatment, volatile organic compounds decomposition and in some thermochemical processes. These research subjects are tackled in a fundamental and practical point of view. (O.M.)

Environment of micro-quasars and other high energy sources in our galaxy

International Nuclear Information System (INIS)

Fuchs, Yael

2001-01-01

This thesis presents the study of the environment of two micro-quasars and one soft gamma-ray repeater (SGR), mainly based on infrared (IR) images taken with ISOCAM, the camera on board of the ISO satellite, between 4 to 18 micron. The results are compared to other wavelengths ones, from radio to X-ray. GRS1915+105's study reveals mid-IR thermal emission from dust surrounding the micro-quasar, and probably heated by its activity. The multi-wavelength observation of two possible counterpart of this X-ray binary relativistic jet interactions with the surrounding medium, situated at more than 10 parsec from the source, are inconclusive. SS433 has also been observed with PHOT, another instrument on board of ISO, spectroscopically at 2-12 micron and in far IR photometry. Spectra and mass-loss estimate imply the visible companion of this micro-quasar, the nature of which has never been precisely determined, to be likely a Wolf-Rayet star. The mass ejected by this star escapes from the X-ray binary to form probably dust surrounding the system and emitting in far IR. W50, the radio nebula surrounding SS433 and elongated under its relativistic jet action has been partly mapped at 15 micron. No particular emission was found in the eastern lobe. In the western lobe, IR hot-spots, partly corresponding to radio emission and coincident with molecular clouds, lie in the apparent X-ray relativistic jet course, and they possibly trace its interactions with the denser medium of this lobe. Near and mid-IR images of SGR1806-20 do not show any evidence of its high energy activity, but they reveal a young star cluster still enshrouded in their birth cloud, which could also be the original place of the SGR, and then possibly be a key for the understanding of its particular properties. (author) [fr

Environment-adjusted total-factor energy efficiency of Taiwan's service sectors

International Nuclear Information System (INIS)

Fang, Chin-Yi; Hu, Jin-Li; Lou, Tze-Kai

2013-01-01

This study computes the pure technical efficiency (PTE) and energy-saving target of Taiwan's service sectors during 2001–2008 by using the input-oriented data envelopment analysis (DEA) approach with the assumption of a variable returns-to-scale (VRS) situation. This paper further investigates the effects of industry characteristics on the energy-saving target by applying the four-stage DEA proposed by Fried et al. (1999). We also calculate the pre-adjusted and environment-adjusted total-factor energy efficiency (TFEE) scores in these service sectors. There are three inputs (labor, capital stock, and energy consumption) and a single output (real GDP) in the DEA model. The most energy efficient service sector is finance, insurance and real estate, which has an average TFEE of 0.994 and an environment-adjusted TFEE (EATFEE) of 0.807. The study utilizes the panel-data, random-effects Tobit regression model with the energy-saving target (EST) as the dependent variable. Those service industries with a larger GDP output have greater excess use of energy. The capital–labor ratio has a significantly positive effect while the time trend variable has a significantly negative impact on the EST, suggesting that future new capital investment should also be accompanied with energy-saving technology in the service sectors. - Highlights: • The technical efficiency and energy-saving target of service sectors are assessed. • The pre-adjusted and environment-adjusted total-factor energy efficiency scores in services are assessed. • The industrial characteristic differences are examined by the panel-data, random-effects Tobit regression model. • Labor, capital, and energy and an output (GDP) are included in the DEA model. • Future new capital investment should also be accompanied with energy-saving technology in the service sectors

Industrial energy efficiency: Achieving success in a difficult environment

Energy Technology Data Exchange (ETDEWEB)

Castellow, Carl

2010-09-15

Energy use and the resulting environmental impacts are major points of concern for the world in the 21st century. Opinions that define the challenges of sustainable energy options are as diverse as the proposed solutions. The industrial sector is a key area both from the standpoint of the amount of energy consumed and the magnitude of the energy options that exist there. However, history has shown that success in the industrial energy sector requires careful planning and consideration of the unique challenges of the manufacturing environment.

Combining a survey approach and energy and indoor environment auditing in historic buildings

DEFF Research Database (Denmark)

Rohdin, Patrik; Dalewski, Mariusz; Moshfegh, Bahram

2016-01-01

Purpose – This paper presents an approach where a survey study is combined with energy and indoor environment auditing in the built environment. The combination of methods presented in this paper is one way to obtain a wider perspective on the indoor environment and energy use and also let...... this research project. Design/methodology/approach – A combination of energy and indoor environment auditing and standardized occupant surveys. Findings – The main findings in the paper are related to the good agreement between results from standardized occupant surveys and physical measurements...

A sociology of energy, buildings and the environment

Energy Technology Data Exchange (ETDEWEB)

Guy, Simon; Shove, Elizabeth

2000-07-01

Focusing upon energy conservation and the built environment, this book engages with areas of debate and policy currently dominated by technologists and natural scientists using both empirical research and theory. (Author)

Symposium on Pacific Energy Cooperation '99. Changing economic environment and energy cooperation in Asia

Energy Technology Data Exchange (ETDEWEB)

NONE

1999-02-16

Compiled in this publication are the papers delivered at the above conference held in Tokyo on February 16-17, 1999. Presented in Session 1, entitled 'economic reforms and energy situation in Asian countries,' are the causes and lessons of economic and financial crisis in the Asian countries and the prospect of restoration; the outlook of energy supply and demand in the Asia Pacific region; and a message from APEC (Asia-Pacific Economic Cooperation Conference) Okinawa Energy Ministers' Meeting. Discussed in Session 2, entitled 'energy security in the Asia Pacific region,' are the outlook for world oil prices; and the stable supply of oil and gas in the Asia Pacific region. Discussed in Session 3, entitled the 'deregulation of the energy sector in the Asia Pacific region,' are the deregulation of the power sector, progress and problems; and the privatization of the oil and gas sectors. Many papers are presented also in Session 4, entitled the 'energy and environment in the Asia Pacific region, and in Session 5 entitled 'pacific energy cooperation in the changing economic and energy environment.' (NEDO)

Communication as a management task: Energy and environment. Lectures

International Nuclear Information System (INIS)

Jung. H.

1993-01-01

The energy utilities are working in an area of the community confronted by critical questions. The motto fo the 2nd IZE Communications Day proceedings was: 'Energy and the Environment - Public relations in the area of tension between Ecology and Economy'. It was a meeting of domestic and international business directors, politicians, public-relations specialists and journalists. The main concern of the lectures, discussions, workshops and conversation topics was how communication with the medium could be improved, thus enhancing their image in the press, on the radio and television. Top editors from the leading newspapers have strated and discussed their policy. A workshop case-study showed how readily the credibility and acceptance of the energy and environment sector could be improved through longterm, honest, dialogue-oriented and professional public relations work. (orig./UA) [de

Effects of Genotype by Environment Interactions on Milk Yield, Energy Balance, and Protein Balance

NARCIS (Netherlands)

Beerda, B.; Ouweltjes, W.; Sebek, L.B.J.; Windig, J.J.; Veerkamp, R.F.

2007-01-01

Increases in genetic merit for milk yield are associated with increases in mobilization of body reserves. This study assessed the effects of genotype by environment (GxE) interactions on milk yield and energy and protein balances. Heifers (n = 100) with high or low genetic merit for milk yield were

Considerations for a regional energy - environment game. [Development and application of methodology

Energy Technology Data Exchange (ETDEWEB)

Denton, J; Saaty, T; Blair, P; Ma, F; Ojalvo, S; Rahbar, F; Shimamoto, G

1975-06-30

The elements and structure of a small-scale regional energy-environment game are presented, with special emphasis on the definition of appropriate actors and state variables as well as characterization of the target region for which the game is designed. The results of this Phase I game will be used to aid the design of components in a more comprehensive game (Phase II) that can be used for investigating various energy-environment scenarios in a regional assessment study program. The principal results that will be used in the Phase II effort are: (1) definition of the target region; (2) development of reference scenarios describing energy-environment trends and mechanisms within the target region; (3) characterization of principal actors involved in the regional energy - environment system; and (4) definition of a set of factors or state variables that reflect the state of that system. (auth)

An Interactive and Comprehensive Working Environment for High-Energy Physics Software with Python and Jupyter Notebooks

Science.gov (United States)

Braun, N.; Hauth, T.; Pulvermacher, C.; Ritter, M.

2017-10-01

Today’s analyses for high-energy physics (HEP) experiments involve processing a large amount of data with highly specialized algorithms. The contemporary workflow from recorded data to final results is based on the execution of small scripts - often written in Python or ROOT macros which call complex compiled algorithms in the background - to perform fitting procedures and generate plots. During recent years interactive programming environments, such as Jupyter, became popular. Jupyter allows to develop Python-based applications, so-called notebooks, which bundle code, documentation and results, e.g. plots. Advantages over classical script-based approaches is the feature to recompute only parts of the analysis code, which allows for fast and iterative development, and a web-based user frontend, which can be hosted centrally and only requires a browser on the user side. In our novel approach, Python and Jupyter are tightly integrated into the Belle II Analysis Software Framework (basf2), currently being developed for the Belle II experiment in Japan. This allows to develop code in Jupyter notebooks for every aspect of the event simulation, reconstruction and analysis chain. These interactive notebooks can be hosted as a centralized web service via jupyterhub with docker and used by all scientists of the Belle II Collaboration. Because of its generality and encapsulation, the setup can easily be scaled to large installations.

Multi-Service Highly Sensitive Rectifier for Enhanced RF Energy Scavenging

Science.gov (United States)

Shariati, Negin; Rowe, Wayne S. T.; Scott, James R.; Ghorbani, Kamran

2015-01-01

Due to the growing implications of energy costs and carbon footprints, the need to adopt inexpensive, green energy harvesting strategies are of paramount importance for the long-term conservation of the environment and the global economy. To address this, the feasibility of harvesting low power density ambient RF energy simultaneously from multiple sources is examined. A high efficiency multi-resonant rectifier is proposed, which operates at two frequency bands (478–496 and 852–869 MHz) and exhibits favorable impedance matching over a broad input power range (−40 to −10 dBm). Simulation and experimental results of input reflection coefficient and rectified output power are in excellent agreement, demonstrating the usefulness of this innovative low-power rectification technique. Measurement results indicate an effective efficiency of 54.3%, and an output DC voltage of 772.8 mV is achieved for a multi-tone input power of −10 dBm. Furthermore, the measured output DC power from harvesting RF energy from multiple services concurrently exhibits a 3.14 and 7.24 fold increase over single frequency rectification at 490 and 860 MHz respectively. Therefore, the proposed multi-service highly sensitive rectifier is a promising technique for providing a sustainable energy source for low power applications in urban environments. PMID:25951137

Providing a computing environment for a high energy physics workshop

International Nuclear Information System (INIS)

Nicholls, J.

1991-03-01

Although computing facilities have been provided at conferences and workshops remote from the hose institution for some years, the equipment provided has rarely been capable of providing for much more than simple editing and electronic mail over leased lines. This presentation describes the pioneering effort involved by the Computing Department/Division at Fermilab in providing a local computing facility with world-wide networking capability for the Physics at Fermilab in the 1990's workshop held in Breckenridge, Colorado, in August 1989, as well as the enhanced facilities provided for the 1990 Summer Study on High Energy Physics at Snowmass, Colorado, in June/July 1990. Issues discussed include type and sizing of the facilities, advance preparations, shipping, on-site support, as well as an evaluation of the value of the facility to the workshop participants

Cross-Layer Energy Optimization for IoT Environments: Technical Advances and Opportunities

Directory of Open Access Journals (Sweden)

Kirshna Kumar

2017-12-01

Full Text Available Energy efficiency is a significant characteristic of battery-run devices such as sensors, RFID and mobile phones. In the present scenario, this is the most prominent requirement that must be served while introducing a communication protocol for an IoT environment. IoT network success and performance enhancement depend heavily on optimization of energy consumption that enhance the lifetime of IoT nodes and the network. In this context, this paper presents a comprehensive review on energy efficiency techniques used in IoT environments. The techniques proposed by researchers have been categorized based on five different layers of the energy architecture of IoT. These five layers are named as sensing, local processing and storage, network/communication, cloud processing and storage, and application. Specifically, the significance of energy efficiency in IoT environments is highlighted. A taxonomy is presented for the classification of related literature on energy efficient techniques in IoT environments. Following the taxonomy, a critical review of literature is performed focusing on major functional models, strengths and weaknesses. Open research challenges related to energy efficiency in IoT are identified as future research directions in the area. The survey should benefit IoT industry practitioners and researchers, in terms of augmenting the understanding of energy efficiency and its IoT-related trends and issues.

Spectroscopic gamma camera for use in high dose environments

Energy Technology Data Exchange (ETDEWEB)

Ueno, Yuichiro, E-mail: yuichiro.ueno.bv@hitachi.com [Research and Development Group, Hitachi, Ltd., Hitachi-shi, Ibaraki-ken 319-1221 (Japan); Takahashi, Isao; Ishitsu, Takafumi; Tadokoro, Takahiro; Okada, Koichi; Nagumo, Yasushi [Research and Development Group, Hitachi, Ltd., Hitachi-shi, Ibaraki-ken 319-1221 (Japan); Fujishima, Yasutake; Kometani, Yutaka [Hitachi Works, Hitachi-GE Nuclear Energy, Ltd., Hitachi-shi, Ibaraki-ken (Japan); Suzuki, Yasuhiko [Measuring Systems Engineering Dept., Hitachi Aloka Medical, Ltd., Ome-shi, Tokyo (Japan); Umegaki, Kikuo [Faculty of Engineering, Hokkaido University, Sapporo-shi, Hokkaido (Japan)

2016-06-21

We developed a pinhole gamma camera to measure distributions of radioactive material contaminants and to identify radionuclides in extraordinarily high dose regions (1000 mSv/h). The developed gamma camera is characterized by: (1) tolerance for high dose rate environments; (2) high spatial and spectral resolution for identifying unknown contaminating sources; and (3) good usability for being carried on a robot and remotely controlled. These are achieved by using a compact pixelated detector module with CdTe semiconductors, efficient shielding, and a fine resolution pinhole collimator. The gamma camera weighs less than 100 kg, and its field of view is an 8 m square in the case of a distance of 10 m and its image is divided into 256 (16×16) pixels. From the laboratory test, we found the energy resolution at the 662 keV photopeak was 2.3% FWHM, which is enough to identify the radionuclides. We found that the count rate per background dose rate was 220 cps h/mSv and the maximum count rate was 300 kcps, so the maximum dose rate of the environment where the gamma camera can be operated was calculated as 1400 mSv/h. We investigated the reactor building of Unit 1 at the Fukushima Dai-ichi Nuclear Power Plant using the gamma camera and could identify the unknown contaminating source in the dose rate environment that was as high as 659 mSv/h.

Evaluation of The Role and Contribution of UNDP in Environment and Energy

DEFF Research Database (Denmark)

Wells, Michael P.; Marcussen, Henrik Secher; Uitto, Juha I.

Evaluation and assessment of UNDP´s positioning and contribution to managing environment and energy for sustainable development. The scope of the evaluation covers all programmatic and operational aspects of the environment and energy area in all UNDP´s geographic regions and at the global...

Optimal Energy Taxation for Environment and Efficiency

Energy Technology Data Exchange (ETDEWEB)

Pak, Y.D. [Korea Energy Economics Institute, Euiwang (Korea)

2001-11-01

Main purpose of this research is to investigate about how to use energy tax system to reconcile environmental protection and economic growth, and promote sustainable development with the emphasis of double dividend hypothesis. As preliminary work to attain this target, in this limited study I will investigate the specific conditions under which double dividend hypothesis can be valid, and set up the model for optimal energy taxation. The model will be used in the simulation process in the next project. As the beginning part in this research, I provide a brief review about energy taxation policies in Sweden, Netherlands, and the United States. From this review it can be asserted that European countries are more aggressive in the application of environmental taxes like energy taxes for a cleaner environment than the United States. In next part I examined the rationale for optimal environmental taxation in the first-best and the second-best setting. Then I investigated energy taxation how it can provoke various distortions in markets and be connected to the marginal environmental damages and environmental taxation. In the next chapter, I examined the environmentally motivated taxation in the point of optimal commodity taxation view. Also I identified the impacts of environmental taxation in various circumstances intensively to find out when the environment tax can yield double dividend after taking into account of even tax-interaction effects. Then it can be found that even though in general the environmental tax exacerbates the distortion in the market rather than alleviates, it can also improve the welfare and the employment under several specific circumstances which are classified as various inefficiencies in the existing tax system. (author). 30 refs.

Environment-adjusted regional energy efficiency in Taiwan

International Nuclear Information System (INIS)

Hu, Jin-Li; Lio, Mon-Chi; Yeh, Fang-Yu; Lin, Cheng-Hsun

2011-01-01

This study applies the four-stage DEA procedure to calculate the energy efficiency of 23 regions in Taiwan from 1998 to 2007. After controlling for the effects of external environments, only Taipei City, Chiayi City, and Kaohsiung City are energy efficient. Note that Kaohsiung City reaches the efficiency frontier due to the adjustment via partial environmental factors such as higher education attainment and transport vehicles. We also find a worsening trend for Taiwan's energy efficiency. Not only is there a gap of energy efficiency between Taiwan's metropolitan areas and the other regions, but the gap has also widened in recent years. Those inefficient counties should be given priority and the savings potential. Except for road density, the evidence indicates that each environmental factor has partial incremental effects on input slacks. As more cars and motorcycles are unfavorable externalities affecting partial energy efficiency, the central government should help local governments retire inefficient old motor vehicles, encourage energy-saving vehicle models, and provide convenient mass transportation systems. Besides, people with higher education cause industrial energy inefficient in Taiwan. The conscious of effective energy saving is necessary to schools, communities, and employee accordingly.

High fidelity nuclear energy system optimization towards an environmentally benign, sustainable, and secure energy source

International Nuclear Information System (INIS)

Tsvetkov, Pavel Valeryevich; Rodriguez, Salvador B.; Ames, David E. II; Rochau, Gary Eugene

2009-01-01

The impact associated with energy generation and utilization is immeasurable due to the immense, widespread, and myriad effects it has on the world and its inhabitants. The polar extremes are demonstrated on the one hand, by the high quality of life enjoyed by individuals with access to abundant reliable energy sources, and on the other hand by the global-scale environmental degradation attributed to the affects of energy production and use. Thus, nations strive to increase their energy generation, but are faced with the challenge of doing so with a minimal impact on the environment and in a manner that is self-reliant. Consequently, a revival of interest in nuclear energy has followed, with much focus placed on technologies for transmuting nuclear spent fuel. The performed research investigates nuclear energy systems that optimize the destruction of nuclear waste. In the context of this effort, nuclear energy system is defined as a configuration of nuclear reactors and corresponding fuel cycle components. The proposed system has unique characteristics that set it apart from other systems. Most notably the dedicated High-Energy External Source Transmuter (HEST), which is envisioned as an advanced incinerator used in combination with thermal reactors. The system is configured for examining environmentally benign fuel cycle options by focusing on minimization or elimination of high level waste inventories. Detailed high-fidelity exact-geometry models were developed for representative reactor configurations. They were used in preliminary calculations with Monte Carlo N-Particle eXtented (MCNPX) and Standardized Computer Analysis for Licensing Evaluation (SCALE) code systems. The reactor models have been benchmarked against existing experimental data and design data. Simulink(reg s ign), an extension of MATLAB(reg s ign), is envisioned as the interface environment for constructing the nuclear energy system model by linking the individual reactor and fuel component sub

Energy and Environment in the Lake Victoria basin.

OpenAIRE

Arungu-Olende, S.

2006-01-01

The local and national economies of Lake Victoria basin communities are heavily dependent on energy that fuels agriculture, industry, commerce, transportation and other economic activities; and powers our houses, offices, hospitals and buildings. Energy is therefore key to facilitating the development income generating opportunities, improving living standards, reducing poverty, and ensuring the protection of the environment. The development and use of various forms of renewable and non-renew...

Highly Nonclassical Quantum States and Environment Induced Decoherence

Science.gov (United States)

Foldi, Peter

2004-06-01

In this thesis concrete quantum systems are investigated in the framework of the environment induced decoherence. The focus is on the dynamics of highly nonclassical quantum states, the Wigner function of which are negative over some regions of their domains. One of the chosen physical systems is a diatomic molecule, where the potential energy of the nuclei is an anharmonic function of their distance. A system of two-level atoms, which can be important from the viewpoint of quantum information technology, is also investigated. A method is described that is valid in both systems and can determine the characteristic time of the decoherence in a dynamical way. The direction of the decoherence and its relation to energy dissipation is also studied. Finally, a scheme is proposed that can prepare decoherence-free states using the experimental techniques presently available.

Star Formation in High Pressure, High Energy Density Environments: Laboratory Experiments of ISM Dust Analogs

International Nuclear Information System (INIS)

Breugel, W. van; Bajt, S.; Bradley, J.; Bringa, E.; Dai, Z.; Felter, T.; Graham, G.; Kucheyev, S.; Torres, D.; Tielens, A.; Baragiola, R.; Dukes, C.; Loeffler, M.

2005-01-01

Dust grains control the chemistry and cooling, and thus the gravitational collapse of interstellar clouds. Energetic particles, shocks and ionizing radiation can have a profound influence on the structure, lifetime and chemical reactivity of the dust, and therefore on the star formation efficiency. This would be especially important in forming galaxies, which exhibit powerful starburst (supernovae) and AGN (active galactic nucleus) activity. How dust properties are affected in such environments may be crucial for a proper understanding of galaxy formation and evolution. The authors present the results of experiments at LLNL which show that irradiation of the interstellar medium (ISM) dust analog forsterite (Mg 2 SiO 4 ) with swift heavy ions (10 MeV Xe) and a large electronic energy deposition amorphizes its crystalline structure, without changing its chemical composition. From the data they predict that silicate grains in the ISM, even in dense and cold giant molecular clouds, can be amorphized by heavy cosmic rays (CR's). This might provide an explanation for the observed absence of crystalline dust in the ISM clouds of the Milky Way galaxy. This processing of dust by CR's would be even more important in forming galaxies and galaxies with active black holes

Why high energy physics

International Nuclear Information System (INIS)

Diddens, A.N.; Van de Walle, R.T.

1981-01-01

An argument is presented for high energy physics from the point of view of the practitioners. Three different angles are presented: The cultural consequence and scientific significance of practising high energy physics, the potential application of the results and the discovery of high energy physics, and the technical spin-offs from the techniques and methods used in high energy physics. (C.F.)

Energy, environment and pursuit of happiness; Energy kankyo mondai ningen no kofuku kara kangaeru

Energy Technology Data Exchange (ETDEWEB)

Shingu, H. [Kyoto University, Kyoto (Japan)

1997-05-05

The energy and environment issue was considered from a viewpoint of human happiness. The paper picks up economy, philosophy, energy and humans as organisms, and considered how the principle of the increase by geometrical progression plays an important role in these. That the repetition in phenomena is like the increase by geometrical progression means that changes increase not linearly but exponentially and nonlinearly and bring such large changes as are unimaginable. The increase in entropy, which is caused by a nonlinear increase of the state, is an irreparable change. The problem of the pursuit of happiness also cannot be solved by the linear thought. The energy and environment problem cannot reach the solution in an extension of the linear thought in which humans have overcome poverty and lacks since the past and pursued richness earnestly. Namely, it is necessary for the 21st century to stop thinking of the energy utilization for seeking for much more richness and to try to think the energy issue in the social system where happiness with not too much richness is presupposed. 16 refs., 1 fig., 1 tab.

Energy transfer in structured and unstructured environments

DEFF Research Database (Denmark)

Iles-Smith, Jake; Dijkstra, Arend G.; Lambert, Neill

2016-01-01

of motion over a wide range of parameters. Furthermore, we show that the Zusman equations, which may be obtained in a semiclassical limit of the reaction coordinate model, are often incapable of describing the correct dynamical behaviour. This demonstrates the necessity of properly accounting for quantum......We explore excitonic energy transfer dynamics in a molecular dimer system coupled to both structured and unstructured oscillator environments. By extending the reaction coordinate master equation technique developed by Iles-Smith et al. [Phys. Rev. A 90, 032114 (2014)], we go beyond the commonly...... correlations generated between the system and its environment when the Born-Markov approximations no longer hold. Finally, we apply the reaction coordinate formalism to the case of a structured environment comprising of both underdamped (i.e., sharply peaked) and overdamped (broad) components simultaneously...

The Operation Consequence of Nuclear Energy to Environment

International Nuclear Information System (INIS)

Suhariyono, Gatot; Sutarman

2003-01-01

Objective of the paper is to give information the operation consequence of nuclear energy to environment, so that expected as organizer of PLTN can anticipate or depress as minimum as possible radiology impact to the radiation workers and society in general, and also socialization that operation of nuclear energy do not give the negative impact, if conducted its control to environment seriously. Parts of which it is important to know from this paper are : one. Estimate of equivalent dose of collective effective in a normal condition is the operation cycle for nuclear energy at worker and local or regional resident 10, 100 or 10.000 next years. 2. Equivalent dose of global collective effective is for various the radiation sources. 3. Estimate of dose per cap ut annual of nuclear electric power until year 2500. 4. Aspect of non-radiology is to cooler system, usage of farm, dismissal of chemistry, advantage of hot water waste, its effect to fish, benthos, plankton, vegetation, animal and preparation of nuclear emergency

Economy, environment and energy: an application to the construction sector

International Nuclear Information System (INIS)

Amarilla, Beatriz Cecilia

1992-01-01

This paper aims to study the relationships between energy, environment, economy and the construction sector. An economical evaluation of environmental benefits is presented, discussing different aspects about the environment and the impacts from the constructions. 10 refs., 4 figs., 3 tabs

Creating high performance buildings: Lower energy, better comfort

International Nuclear Information System (INIS)

Brager, Gail; Arens, Edward

2015-01-01

Buildings play a critical role in the challenge of mitigating and adapting to climate change. It is estimated that buildings contribute 39% of the total U.S. greenhouse gas (GHG) emissions [1] primarily due to their operational energy use, and about 80% of this building energy use is for heating, cooling, ventilating, and lighting. An important premise of this paper is about the connection between energy and comfort. They are inseparable when one talks about high performance buildings. Worldwide data suggests that we are significantly overcooling buildings in the summer, resulting in increased energy use and problems with thermal comfort. In contrast, in naturally ventilated buildings without mechanical cooling, people are comfortable in much warmer temperatures due to shifting expectations and preferences as a result of occupants having a greater degree of personal control over their thermal environment; they have also become more accustomed to variable conditions that closely reflect the natural rhythms of outdoor climate patterns. This has resulted in an adaptive comfort zone that offers significant potential for encouraging naturally ventilated buildings to improve both energy use and comfort. Research on other forms for providing individualized control through low-energy personal comfort systems (desktop fans, foot warmed, and heated and cooled chairs) have also demonstrated enormous potential for improving both energy and comfort performance. Studies have demonstrated high levels of comfort with these systems while ambient temperatures ranged from 64–84°F. Energy and indoor environmental quality are inextricably linked, and must both be important goals of a high performance building

Laser Science and Technology Program Update 2002

International Nuclear Information System (INIS)

Hackel, L A; Chen, H L

2003-01-01

The Laser Science and Technology (LSandT) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are of interest to the NIF Directorate but outside the scope of the NIF funding. The primary objectives of LSandT activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and to invent develop, and deliver improved concepts and hardware for other government agencies and industry. Special efforts have been devoted to building and maintaining our capabilities in three technology areas: high-power short-pulse solid-state lasers, high-power optical materials, and applications of advanced lasers. LSandT activities during 2002 focused on seven major areas: (1) NIF Project--LSandT led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 3ω optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)--LSandT personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LSandT continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy

Energy efficiency improvement and environment in China

International Nuclear Information System (INIS)

Rouhier, Stephane

2010-01-01

Massive reliance on polluting sources of energy (coal, traditional biomass and oil) has damaged the environment in China over years. Now, China is the world's first carbon dioxide emitter and air pollution represents between 2 and 7 percent of loss of Gross Domestic Product per year, depending on the studies chosen. In order to reduce the level of pollution, one can either enhance the technology in use or reduce the share of polluting fuels in the energy mix. Indeed, current Chinese technologies are far less efficient than those of developed countries and the energy mix is massively composed of polluting sources of energy. So, they both represent huge potential savings. This article enquires the link between diversification, efficiency in the power sector and the per capita emissions and shows that emissions are negatively correlated to a diversification of the energy mix as well as an improvement of power generating technologies. Hence, it justifies the diversification of the energy mix and technology improvement as viable strategies to tackle pollution

Energy, environment, and policy choices: Summer institutes for science and social studies educators

Energy Technology Data Exchange (ETDEWEB)

Marek, E.A.; Chiodo, J.J.; Gerber, B.L.

1997-06-01

The Center for Energy Education (CEE) is a partnership linking the University of Oklahoma, Close Up Foundation and Department of Energy. Based upon the theme of energy, environment and public policy, the CEE`s main purposes are to: (1) educate teachers on energy sources, environmental issues and decisionmaking choices regarding public policy; (2) develop interdisciplinary curricula that are interactive in nature (see attachments); (3) disseminate energy education curricula; (4) serve as a resource center for a wide variety of energy education materials; (5) provide a national support system for teachers in energy education; and (6) conduct research in energy education. The CEE conducted its first two-week experimentially-based program for educators during the summer of 1993. Beginning at the University of Oklahoma, 57 teachers from across the country examined concepts and issues related to energy and environment, and how the interdependence of energy and environment significantly influences daily life. During the second week of the institute, participants went to Washington, D.C. to examine the processes used by government officials to make critical decisions involving interrelationships among energy, environment and public policy. Similar institutes were conducted during the summers of 1994 and 1995 resulting in nearly 160 science and social studies educators who had participated in the CEE programs. Collectively the participants represented 36 states, the Pacific Territories, Puerto Rico, and Japan.

Trends of world energy consumption and possibilities of environment protective power generation

International Nuclear Information System (INIS)

Frischengruber, K.

1991-01-01

The population of the world will duplicate within the next three to four decades. The primary energy consumption will increase accordingly. Considering the limited reach of our fossil energy resources and their negative impact on the global climate, alternative strategies for the power generation have to be developed. The contribution of the renewable energy sources will be important, but not sufficient, due to their high generation costs. The nuclear power, which already today participates essentially in the energy supply, will remain one of the most important options for environment protecting energy generation. Especially for the developing countries, which -in general- have currently a not covered energy demand, the build up of reasonable energy generation structures means enormous volumes of investments, which can only be financed with the assistance of the industrialized countries. Those, on the other hand, have to economize their energy consumption and have to undertake any effort in continuing with the development of clean, safe and competitive renewable resources. To provide increasing world population with sufficient energy and at the same time to reduce CO 2 emissions is one of the biggest challenges that mankind has ever faced. (Author)

Energy Design Guidelines for High Performance Schools: Hot and Humid Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Temperate and Humid Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Temperate and Mixed Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Cold and Humid Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Cool and Dry Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Hot and Dry Climates

Energy Technology Data Exchange (ETDEWEB)

2002-01-01

School districts around the country are finding that smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create an exemplary building that is both energy and resource efficient.

Energy Design Guidelines for High Performance Schools: Cool and Humid Climates

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

ELBE Center for High-Power Radiation Sources

Directory of Open Access Journals (Sweden)

Peter Dr. Michel

2016-01-01

Full Text Available In the ELBE Center for High-Power Radiation Sources, the superconducting linear electron accelerator ELBE, serving  two free electron lasers, sources for intense coherent THz radiation, mono-energetic positrons, electrons, γ-rays, a neutron time-of-flight system as well as two synchronized ultra-short pulsed Petawatt laser systems are collocated. The characteristics of these beams make the ELBE center a unique research instrument for a variety of external users in fields ranging from material science over nuclear physics to cancer research, as well as scientists of the Helmholtz-Zentrum Dresden-Rossendorf (HZDR.

Energy booklet. Part 2. Energy saving tips for more pocket money and environment; EnergieFibel. Heft 2. EnergieSparTipps fuer mehr Taschengeld und Umwelt

Energy Technology Data Exchange (ETDEWEB)

NONE

2009-07-01

The effective environmental protection begins when saving. Energy which is not used at all also cannot burden the environment. Pleasant side effect: also the purse is treated gently. One of the most important measures for the reduction of energy consumption is the correct thermal insulation of a building so that heating energy cannot escape unused in the free. Thus, between 50 and 75 per cent of energy can be saved. Investments within this range usually are profitable already after a short time. The utilization of damming materials from regenerative raw materials enables application of financial incentives. In addition, within other ranges of the house modernizations and a change of the behaviour of utilization help to save energy. The contribution under consideration gives advices in order to improve dwellings energy-technically. The environment and the purse will thank it.

Exergy energy, environment and sustainable development

CERN Document Server

Dincer, Ibrahim; Rosen, Marc A

2007-01-01

This book deals with exergy and its applications to various energy systems and applications as a potential tool for design, analysis and optimization, and its role in minimizing and/or eliminating environmental impacts and providing sustainable development. In this regard, several key topics ranging from the basics of the thermodynamic concepts to advanced exergy analysis techniques in a wide range of applications are covered as outlined in the contents. - Comprehensive coverage of exergy and its applications - Connects exergy with three essential areas in terms of energy, environment and sustainable development - Presents the most up-to-date information in the area with recent developments - Provides a number of illustrative examples, practical applications, and case studies - Easy to follow style, starting from the basics to the advanced systems.

The role of built environment energy efficiency in a sustainable UK energy economy

International Nuclear Information System (INIS)

Clarke, Joseph A.; Johnstone, Cameron M.; Kelly, Nicolas J.; Strachan, Paul A.; Tuohy, Paul

2008-01-01

Energy efficiency in the built environment can make significant contributions to a sustainable energy economy. In order to achieve this, greater public awareness of the importance of energy efficiency is required. In the short term, new efficient domestic appliances, building technologies, legislation quantifying building plant performance, and improved building regulations to include installed plant will be required. Continuing these improvements in the longer term is likely to see the adoption of small-scale renewable technologies embedded in the building fabric. Internet-based energy services could deliver low-cost building energy management and control to the mass market enabling plant to be operated and maintained at optimum performance levels and energy savings quantified. There are many technology options for improved energy performance of the building fabric and energy systems and it is not yet clear which will prove to be the most economic. Therefore, flexibility is needed in legislation and energy-efficiency initiatives

Nuclear, energy, environment, wastes, society - NEEDS

International Nuclear Information System (INIS)

2013-01-01

This document presents the seven projects based on partnerships between several bodies, companies and agencies (CNRS, CEA, Areva, EDF, IRSN, ANDRA, BRGM) on research programmes on nuclear systems and scenarios, on resources (mines, processes, economy), on the processing and packaging of radioactive wastes, on the behaviour of materials for storage, on the impact of nuclear activities on the environment, on the relationship between nuclear, risks and society, and on materials for nuclear energy

H.323 based collaborative environment for high energy and nuclear physics

International Nuclear Information System (INIS)

Teiji Nakamura; Kiyoharu Hashimoto; Hitoshi Hirose; Yukio Karita; Youhei Morita; Soh Suzuki; Fukuko Yuasa

2001-01-01

After having evaluated various H.323 products for these two years, KEK and Japanese HENP community started to move from ISDN (H.320)-based video conferencing environment into IP(H.323)-based one. Primary reason for the move is to cut down the ever increasing ISDN communication cost. At the same time the H.323 can offer more powerful collaborative environment. In order to make KEK to be a center for the H.323-based collaborative environment in Japan, PictureTel's LIVE GATEWAY as a H.320/H.323 gateway, which is essential for the smooth transition, Cisco IP/VC 3510 as a H.323/MCU, and Cisco 2610 as a gatekeeper were installed at KEK in March 2001. And the transition started. The authors describe the collaborative environment which the users can have, together with its operational results

Investigation of Rare Particle Production in High Energy Nuclear Collisions

International Nuclear Information System (INIS)

Crawford, Henry J.; Engelage, Jon M.

1999-01-01

Our program is an investigation of the hadronization process through measurement of rare particle production in high energy nuclear interactions. Such collisions of heavy nuclei provide an environment similar in energy density to the conditions in the Big Bang. We are currently involved in two major experiments to study this environment, E896 at the AGS and STAR at RHIC. We have completed our physics running of E896, a search for the H dibaryon and measurement of hyperon production in AuAu collisions, and are in the process of analyzing the data. We have produced the electronics and software for the STAR trigger and will begin to use these tools to search for anti-nuclei and strange hadrons when RHIC turns on later this year

4th International Conference on Energy and Environment 2013 (ICEE 2013)

Science.gov (United States)

Chakrabarty, Chandan Kumar; Shamsuddin, Abd Halim Bin; Ahmad, Ibrahim Bin; Desa, Mohamed Nor Bin Mohamed; Din, Norashidah Bte Md; Bte Mohd, Lariyah; Hamid, Nasri A.; See, Ong Hang; Hafiz Nagi, Farrukh; Yong, Lee Choon; Pasupuleti, Jagadeesh; Mei, Goh Su; Abdullah, Fairuz Bin; Satgunam, Meenaloshini

2013-06-01

The 4th International Conference on Energy & Environment 2013 (ICEE2013) was organized by the Universiti Tenaga Nasional (UNITEN) to provide a platform for creating and sharing ideas among engineers, researchers, scientists, industrialists and students in sustainable green energy and technologies. The theme 'Shaping a Sustainable Future through Advancement in Green Energy Technology' is in line with the University's vision to be a leading global energy university that shapes a sustainable future. The general scopes of the conference are renewable energy, smart grid, green technology, energy policies and economics, sustainable green energy and environment, sustainable education, international cooperation and innovation and technology transfer. Five international keynote speakers delivered their speeches in specialized areas of green energy technology and sustainability. In addition, the conference highlights several special parallel sessions by notable invited presenters in their niche areas, which are: Hybrid Energy Power Quality & Distributed Energy Smart Grid Nuclear Power & Technologies Geohazard Management Greener Environment for Sustainability Advances in Computational Fluid Dynamics The research papers presented in ICEE2013 are included in this volume of IOP Conference Series: Earth and Environmental Science (EES). EES is abstracted and indexed in SCOPUS, GeoBase, GeoRef, Compendex, Inspec, Chemical Abstracts Service, NASA Astrophysics Data System, and International Nuclear Information System (INIS). With the comprehensive programme outline, the organizing committee hopes that the ICEE2013 was a notable intellectual sharing session for the research and academic community in Malaysia and regionally. The organizing committee expresses gratitude to the ICEE2013 delegates for their great support and contributions to the event.

Energy storage and the environment: the role of battery technology

Science.gov (United States)

Ruetschi, Paul

Batteries can store energy in a clean, convenient and efficient manner. Battery-powered electric vehicles are expected to contribute to a cleaner environment. In today's world, batteries are used everywhere: in electronic watches, pocket calculators, flashlights, toys, radios, tape recorders, cameras, camcorders, laptop computers, cordless telephones, paging devices, hearing aids, heart pacers, instruments, detectors, sensors, memory back-up devices, drug dispensing, wireless tools, toothbrushes, razors, stationary emergency power equipment, automobile starters, electric vehicles, boats, submarines, airplanes and satellites. Worldwide, about 15 billion primary batteries, and well over 200 million starter batteries are produced per year. What is the impact of this widespread use of batteries on the environment? What role can battery technology play in order to reduce undue effects on the environment? Since this paper is presented at a lead/acid battery conference, the discussion refers, in particular, to this system. The following aspects are covered: (i) the three "E" criteria that are applicable to batteries: Energy, Economics, Environment; (ii) service life and environment; (iii) judicious use and service life; (iv) recycling.

Plasma instability control toward high fluence, high energy x-ray continuum source

Science.gov (United States)

Poole, Patrick; Kirkwood, Robert; Wilks, Scott; Blue, Brent

2017-10-01

X-ray source development at Omega and NIF seeks to produce powerful radiation with high conversion efficiency for material effects studies in extreme fluence environments. While current K-shell emission sources can achieve tens of kJ on NIF up to 22 keV, the conversion efficiency drops rapidly for higher Z K-alpha energies. Pulsed power devices are efficient generators of MeV bremsstrahlung x-rays but are unable to produce lower energy photons in isolation, and so a capability gap exists for high fluence x-rays in the 30 - 100 keV range. A continuum source under development utilizes instabilities like Stimulated Raman Scattering (SRS) to generate plasma waves that accelerate electrons into high-Z converter walls. Optimizing instabilities using existing knowledge on their elimination will allow sufficiently hot and high yield electron distributions to create a superior bremsstrahlung x-ray source. An Omega experiment has been performed to investigate the optimization of SRS and high energy x-rays using Au hohlraums with parylene inner lining and foam fills, producing 10× greater x-ray yield at 50 keV than conventional direct drive experiments on the facility. Experiment and simulation details on this campaign will be presented. This work was performed under the auspices of the US DoE by LLNL under Contract No. DE-AC52-07NA27344.

Sacrificed country sides. How the energy revolution degrades the environment

International Nuclear Information System (INIS)

Etscheit, Georg

2016-01-01

The volume covers a variety of contributions on the consequences for the environment due to the energy revolution in Germany, including challenges and pitfalls. A realistic survey on the development of the energy revolution is requested in relation to the effectiveness of environmental protection and the legal protection of cultivated landscapes. Architectural aspects concerning wind energy and solar energy plants are discussed in the view of the population.

Energy and the environment: 'the nuclear option'

International Nuclear Information System (INIS)

Hawley, Robert

1997-01-01

The world's consumption of primary energy continues to rise rapidly, mainly because of the developing countries who cannot yet provide the services essential to improving the quality of life. Increasing energy consumption, the effect it will have on the world's finite resources and, more importantly, on the environment, leave the world's population facing serious challenges. This paper will briefly consider the power generation technology options that offer sustainable development including the role that nuclear power plays today, and will need to play in the next century, to preserve and improve the quality of life worldwide. (author)

Research on biomass energy and environment from the past to the future: A bibliometric analysis.

Science.gov (United States)

Mao, Guozhu; Huang, Ning; Chen, Lu; Wang, Hongmei

2018-09-01

The development and utilization of biomass energy can help to change the ways of energy production and consumption and establish a sustainable energy system that can effectively promote the development of the national economy and strengthen the protection of the environment. Here,we perform a bibliometric analysis of 9514 literature reports in the Web of Science Core Collection searched with the key words "Biomass energy" and "Environment*" date from 1998 to 2017; hot topics in the research and development of biomass energy utilization, as well as the status and development trends of biomass energy utilization and the environment, were analyzed based on content analysis and bibliometrics. The interaction between biomass energy and the environment began to become a major concern as the research progressively deepened. This work is of great significance for the development and utilization of biomass energy to put forward specific suggestions and strategies based on the analysis and demonstration of relationships and interactions between biomass energy utilization and environment. It is also useful to researchers for selecting the future research topics. Copyright © 2018 Elsevier B.V. All rights reserved.

Energy and the environment. A global view and strategies

International Nuclear Information System (INIS)

Pasztor, J.

1988-01-01

It should be recognized that the key to the future is in the rational use of energy, that is, a more efficient use of energy rather than a continuous increase in the supply of energy. Every unit of energy saved is a unit of energy which does not have to be produced, and whose environmental impacts do not have to be dealt with. Massive reductions in the growth rates, and, where possible, in the absolute use of energy will help us to gain time to better understand and develop response strategies to problems like climate change on the acidification of the environment. In this sense the rational use of energy, including intensified energy efficiency measures is the most environmentally sound energy option with which we should move into the next century. 25 refs., 4 figs

High temperature energy harvesters utilizing ALN/3C-SiC composite diaphragms

Science.gov (United States)

Lai, Yun-Ju; Li, Wei-Chang; Felmetsger, Valery V.; Senesky, Debbie G.; Pisano, Albert P.

2014-06-01

Microelectromechanical systems (MEMS) energy harvesting devices aiming at powering wireless sensor systems for structural health monitoring in harsh environments are presented. For harsh environment wireless sensor systems, sensor modules are required to operate at elevated temperatures (> 250°C) with capabilities to resist harsh chemical conditions, thereby the use of battery-based power sources becomes challenging and not economically efficient if considering the required maintenance efforts. To address this issue, energy harvesting technology is proposed to replace batteries and provide a sustainable power source for the sensor systems towards autonomous harsh environment wireless sensor networks. In particular, this work demonstrates a micromachined aluminum nitride/cubic silicon carbide (AlN/3C-SiC) composite diaphragm energy harvester, which enables high temperature energy harvesting from ambient pulsed pressure sources. The fabricated device yields an output power density of 87 μW/cm2 under 1.48-psi pressure pulses at 1 kHz while connected to a 14.6-kΩ load resistor. The effects of pulse profile on output voltage have been studied, showing that the output voltage can be maximized by optimizing the diaphragm resonance frequency based on specific pulse characteristics. In addition, temperature dependence of the diaphragm resonance frequency over the range of 20°C to 600°C has been investigated and the device operation at temperatures as high as 600°C has been verified.

Accounting for derivative contracts in an energy environment

International Nuclear Information System (INIS)

Lewthwaite, T.; Majid, H.; Swingler, N.

1999-01-01

This chapter reviews the latest developments in the accounting for derivative contracts in the energy environment, covering the US accounting and disclosure requirements and the Statement of Financial Accounting Standards (SFAS) 133 Accounting for Derivative Instruments and Hedging Activities, and the Emerging Issues Task Force Consensus (EITF) 98-10 accounting for energy trading and risk management activities. UK accounting and disclosure requirements and the international point of view are discussed. Three different types of hedges are described

Accounting for derivative contracts in an energy environment

Energy Technology Data Exchange (ETDEWEB)

Lewthwaite, T.; Majid, H.; Swingler, N. [Arthur Andersen (United Kingdom)

1999-07-01

This chapter reviews the latest developments in the accounting for derivative contracts in the energy environment, covering the US accounting and disclosure requirements and the Statement of Financial Accounting Standards (SFAS) 133 Accounting for Derivative Instruments and Hedging Activities, and the Emerging Issues Task Force Consensus (EITF) 98-10 accounting for energy trading and risk management activities. UK accounting and disclosure requirements and the international point of view are discussed. Three different types of hedges are described.

The Industrial Engineer and Energy and Environment

Directory of Open Access Journals (Sweden)

Sirichan Thongprasert

2009-02-01

Full Text Available Industries have always been a major consumer of energy and a major source of greenhouse gas emissions, causing environmental problems. Concerns about the impact of industries on the environment have led industries to change or adapt their methodologies to be more efficient and environmentally responsible. This article explains the impact that has on the industrial engineer.

The Industrial Engineer and Energy and Environment

OpenAIRE

Sirichan Thongprasert

2009-01-01

Industries have always been a major consumer of energy and a major source of greenhouse gas emissions, causing environmental problems. Concerns about the impact of industries on the environment have led industries to change or adapt their methodologies to be more efficient and environmentally responsible. This article explains the impact that has on the industrial engineer.

The Impact of Energy Price Decline on China's Energy-Economy-Environment System Variables Using a CGE Model

DEFF Research Database (Denmark)

Guo, Zhengquan; Wang, Daojuan; Chen, Chong

In recent years, prices of coal and crude oil have fallen significantly. These declines have had a large impact on China’s energy-economy-environment system variables. This paper establishes a computable general equilibrium model to systematically analyse the impact of coal price changes alone...... or the decline of both coal and oil prices on the variables of China's energy-economy-environment system. The results of the analysis show that the decline of the coal price alone or of coal and crude oil prices together will lead to a significant increase in demand for either coal and total energy or coal...

Cyberinfrastructure for high energy physics in Korea

International Nuclear Information System (INIS)

Cho, Kihyeon; Kim, Hyunwoo; Jeung, Minho

2010-01-01

We introduce the hierarchy of cyberinfrastructure which consists of infrastructure (supercomputing and networks), Grid, e-Science, community and physics from bottom layer to top layer. KISTI is the national headquarter of supercomputer, network, Grid and e-Science in Korea. Therefore, KISTI is the best place to for high energy physicists to use cyberinfrastructure. We explain this concept on the CDF and the ALICE experiments. In the meantime, the goal of e-Science is to study high energy physics anytime and anywhere even if we are not on-site of accelerator laboratories. The components are data production, data processing and data analysis. The data production is to take both on-line and off-line shifts remotely. The data processing is to run jobs anytime, anywhere using Grid farms. The data analysis is to work together to publish papers using collaborative environment such as EVO (Enabling Virtual Organization) system. We also present the global community activities of FKPPL (France-Korea Particle Physics Laboratory) and physics as top layer.

RENEWABLE ENERGY, A KEY TO INTEGRATING COMPETITIVE POLICIES WITH ADVANCED ENVIRONMENT PROTECTION STRATEGIES

Directory of Open Access Journals (Sweden)

Cinade Lucian Ovidiu

2011-12-01

Full Text Available Development of competitive policies and improvement of environment protection strategies are two basic trends of the development of the European Unique Market. Energy, also known as 'industry bread', is basic product and strategic resource, where energy industry plays an obvious role in the economic and social development of any community. Traditional energy production is marred by three major drawbacks: it generates negative externalities by polluting; it is totally in the hands of the producers; hence, prices rise at their will, of fossil fuels such as oil and gas. Present study focuses on electric energy industry, yet bearing over the whole length of the chain producer-to-end-consumer, thus revealed as particularly complex. The question is do alternative energy sources meet the prerequisite of market being competitive meanwhile environment protection being highly observed. We identify limits in point, of the energy market; effects of market liberalization; entry barriers; interchangeability level of energy sources; active forces on the energy market. Competitive rivalry has been expressed as per market micro-economic analysis, based on Michael Porter's 5-forces model. It will thus be noticed that, morphologically, competition evolution depends firstly on the market type. For the time being, the consumer on the energy market stays captive, for various reasons such as: legislation; limits of energy transfer infrastructure; scarcity of resources; resources availability imbalance; no integrative strategy available, of renewable energy resources usage. Energy availability is vital for human society to function. Comparative advantages of renewable energy resources are twofold, as manifested: in terms of economics, i.e. improving competition by substitute products entered at the same time as new producers enter market; and in terms of ecology, by reducing CO2 emissions. As to energy production technology and transfer, the complementary nature will

ENERGY BUDGETS IN FREE-LIVING GREEN IGUANAS IN A SEASONAL ENVIRONMENT

NARCIS (Netherlands)

LICHTENBELT, WDV; WESSELINGH, RA; VOGEL, JT; ALBERS, KBM

Using a variety of techniques we estimated energy expenditure and allocation of energy in free-living green iguanas (Iguana iguana) in a seasonal environment on Curacao, Netherlands Antilles. 1) Daily energy expenditure (DEE) was measured by means of the doubly labeled water (DLW) technique, using

Sustainable development of energy, water and environment systems

DEFF Research Database (Denmark)

Duić, Neven; Guzović, Zvonimir; Kafarov, Vyatcheslav

2013-01-01

The 6th Dubrovnik Conference on Sustainable Development of Energy, Water and Environment Systems (SDEWES Conference), attended by 418 scientists from 55 countries representing six continents. It was held in 2011 and dedicated to the improvement and dissemination of knowledge on methods, policies...

ACCOUNTANCY REFLECTION OF ENVIRONMENT INFORMATION REGARDING THE ENERGY SECTOR

Directory of Open Access Journals (Sweden)

Lucean MIHALCEA

2014-06-01

Full Text Available Natural resources, especially energetical ones, have continuously influenced the evolution of human society, including the economical developement, and so the problem of their deficiency and their limited character is a problem of major interest for the human kind in their quest to find the balance betwen the need of economical expansion and the environment protection. The purpose of this paper work is to show the importancy of energy eficiency by asuming two main action directions: to encrease the quantity of renewable energy and to emprove the energetical efficiency. After the researches we made, we brought in attention the main mechanisms used in the insurance of sustainability security and competitiveness of the energy sector. These practices the objectives of the sustainable development principle, exemplified from accountancy point of view through a new instrument in the economical theory: environmental accountancy which ensures the background regarding the recognition, evaluation and presentation of environment information.

Environmental programs of the Department of Energy and Environment annual highlights

International Nuclear Information System (INIS)

Manowitz, B.

1978-12-01

Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications

Environmental programs of the Department of Energy and Environment annual highlights

Energy Technology Data Exchange (ETDEWEB)

Manowitz, B

1978-12-01

Environmental Sciences is one of the four areas comprising the Department of Energy and Environment at Brookhaven National Laboratory. It carries out a wide range of activities in atmospheric sciences, environmental chemistry, oceanographic sciences, and land and freshwater environmental sciences. In general, these programs are concerned with identification and measurement of pollutants introduced into the environment by energy-related activities and the evaluation and prediction of the effects or potential effects of these pollutants on the environment. This highlights report for Environmental Programs covers the year 1978 and describes the objectives and funding levels of each of the programs, major accomplishments during the year, planned future activities, and current publications.

Characterisation of neutron fields around high-energy x-ray radiotherapy machines

Czech Academy of Sciences Publication Activity Database

Králík, M.; Turek, Karel

2004-01-01

Roč. 110, 1-4 (2004), s. 503-507 ISSN 0144-8420 Institutional research plan: CEZ:AV0Z1048901 Keywords : radiotherapy machines * neutron fields * high-energy Subject RIV: DN - Health Impact of the Environment Quality Impact factor: 0.617, year: 2003

Improved perceived indoor environment in renovated and energy-retrofitted social housing

DEFF Research Database (Denmark)

Knudsen, Henrik Nellemose

2017-01-01

, noise from outside and too little daylight. The evaluation shows that it is possible to achieve a win-win situation, with both energy savings and improved perceived indoor environment. The evaluation also reveals that careful attention is needed to avoid introducing annoying noise from new technical......The purpose of the present study was, among other things, to evaluate how tenants perceived the indoor environment in renovated and energy-retrofitted social housing erected in the 1960s. Tenants answered a questionnaire to quantify problems and satisfaction with the indoor environment before...... and after the renovation work. A majority of tenants perceived the indoor environment improved for all parameters: temperature, draught, air quality, noise and daylight, after the renovation work. In particular, the tenants experienced fewer problems with too low temperature and draught during the winter...

Operational efficiency of forest energy supply chains in different operational environments

Energy Technology Data Exchange (ETDEWEB)

Roeser, D

2012-06-15

Ambitious international efforts to combat climate change have lead to a large interest about the use of forest biomass for energy in many countries. In order to meet the expected growing demand in the future, it will be necessary to improve operational efficiency of existing forest energy supply chains and support the establishment of efficient supply chains in new operational environments. The thesis applied a three-dimensional approach which examines forest energy supply chains from a technical, social and economic viewpoint. Four case studies in different operational environments have been carried out to investigate the applicability of the three dimensional approach to improve operational efficiency. The technical dimension was investigated in Paper 1 and 2. In Paper 1, the effects of climatic conditions, covering of piles, and partial debarking on drying of roundwood were studied in four experimental trials located in Scotland, Finland and Italy. In Paper 2, the chipping of forest biomass was studied in two different operational environments. The investigation of the social dimension in Paper 3 provides insights into the setup of two different supply chains through business process mapping and simulation. Finally, in paper 4, which investigated the economic dimension, an analysis of the effect of the operational environment on technology selection and design of supply chains, is presented. The thesis demonstrates that the chosen approach was practical to investigate the complex relationships between the chosen technologies and different supply chain actors and stakeholders thereby contributing to maintain or improve operational efficiency of forest energy supply chains. Due to its applicability in different operational environments, the approach is also suitable in a more global context. Furthermore, it captures the effect of different aspects and characteristics of the various operational environments on the setup and organization of supply chains. This will

Debating the future of comfort: environmental sustainability, energy consumption and the indoor environment

Energy Technology Data Exchange (ETDEWEB)

Chappells, H.; Shove, E.

2005-02-01

Vast quantities of energy are consumed in heating and cooling to provide what are now regarded as acceptable standards of thermal comfort. In the UK as in a number of other countries, there is a real danger that responses in anticipation of global warming and climate change - including growing reliance on air-conditioning - will increase energy demand and CO{sub 2} emissions even further. This is an appropriate moment to reflect on the history and future of comfort, both as an idea and as a material reality. Based on interviews and discussions with UK policy makers and building practitioners involved in specifying and constructing what will become the indoor environments of the future, four possible scenarios are identified each with different implications for energy and resource consumption. By actively promoting debate about the indoor environment and associated ways of life, it may yet be possible to avoid becoming locked into social and technical trajectories that are ultimately unsustainable. The aim of this paper is to inspire and initiate just such a discussion through demonstrating that comfort is a highly negotiable socio-cultural construct. (author)

Energy booklet. Energy saving tips for more pocket money and environment. Booklet 2; EnergieSparFibel. EnergieSparTipps fuer mehr Taschengeld und Umwelt. Heft 2

Energy Technology Data Exchange (ETDEWEB)

NONE

2010-07-01

The effective environmental protection begins when saving. Energy which is not used at all also cannot burden the environment. Pleasant side effect: also the purse is treated gently. One of the most important measures for the reduction of energy consumption is the correct thermal insulation of a building so that heating energy cannot escape unused in the free. Thus, between 50 and 75 per cent of energy can be saved. Investments within this range usually are profitable already after a short time. The utilization of damming materials from regenerative raw materials enables application of financial incentives. In addition, within other ranges of the house modernizations and a change of the behaviour of utilization help to save energy. The contribution under consideration gives advices in order to improve dwellings energy-technically. The environment and the purse will thank it.

EU-China Cooperation In the Field of Energy, Environment and Climate Change

Directory of Open Access Journals (Sweden)

Pietro De Matteis

2010-11-01

Full Text Available The evolution of the energy market and the intrinsic worldwide scope of environmental threats, such as climate change, are two elements that have pushed the world towards shared approaches to global governance via bilateral institutions and international regimes. This article, with the aid of an institutionalist approach, presents the current status of the EU-China relationship, which is characterised by high institutionalisation, and it underlines how their bilateral cooperation has progressively focused on energy and climate change-related issues. In particular, the article sheds some light on the linkages between energy, environment and climate change and how these have created the basis for the upgrade of the EU-China bilateral relationship to its current level. To do so, it underlines some of the tools, the main frameworks and some of the key outcomes of their bilateral cooperation in these fields.

A survey of energy policy priorities in the United States: Energy supply security, economics, and the environment

International Nuclear Information System (INIS)

Manley, Dawn K.; Hines, Valerie A.; Jordan, Matthew W.; Stoltz, Ronald E.

2013-01-01

Security, environment, and economic concerns are commonly identified as three major objectives of energy policy. State and federal governments have set aggressive targets for carbon emissions reductions and for alternative fuel use and increased vehicle efficiency to reduce petroleum consumption. Moreover, jobs creation and GDP growth are often cited as key drivers for energy policies. Previous studies on energy policy decision-making have examined the process for developing and evaluating options using multi-criteria decision analysis tools. In addition, energy opinion polls have either elicited preferences between two goals or whether the public supports a specific policy action. In this article, we report results from a survey of 884 members of professional membership organizations on how the U.S. should prioritize energy policy across the goals of energy supply security, environment and climate, and economics and job creation. The majority favor policymaking that is balanced across all three. Security and economic concerns increase with age for male respondents, whereas environment is the highest priority for females regardless of age. Unlike previous surveys that target the general public and focus on a particular objective or technology, these results provide an example of eliciting a portfolio allocation across multiple energy policy goals from targeted constituents. - Highlights: • We surveyed 884 members of professional membership organizations on how the U.S. should prioritize energy policy. • The paper addresses direct elicitation of energy policy goal portfolio allocation for a large set of energy stakeholders. • The majority of respondents favor policymaking balanced across multiple goals. • We observed differences in priorities based on age and gender. • Respondents expressed a tension in allocating across goals that are interrelated

NOvel Refractory Materials for High Alkali, High Temperature Environments

Energy Technology Data Exchange (ETDEWEB)

Hemrick, J.G.; Griffin, R. (MINTEQ International, Inc.)

2011-08-30

Refractory materials can be limited in their application by many factors including chemical reactions between the service environment and the refractory material, mechanical degradation of the refractory material by the service environment, temperature limitations on the use of a particular refractory material, and the inability to install or repair the refractory material in a cost effective manner or while the vessel was in service. The objective of this project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al2O3 spinel or other similar magnesia/alumina containing unshaped refractory composition (castables, gunnables, shotcretes, etc) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, highalkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. A research team was formed to carry out the proposed work led by Oak Ridge National Laboratory (ORNL) and was comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The two goals of this project were to produce novel refractory compositions which will allow for improved energy efficiency and to develop new refractory application techniques which would improve the speed of installation. Also methods of hot installation were sought which would allow for hot repairs and on-line maintenance leading to reduced process downtimes and eliminating the need to cool and reheat process vessels.

Modular safety interlock system for high energy physics experiments

International Nuclear Information System (INIS)

Kieffer, J.; Golceff, B.V.

1980-10-01

A frequent problem in electronics systems for high energy physics experiments is to provide protection for personnel and equipment. Interlock systems are typically designed as an afterthought and as a result, the working environment around complex experiments with many independent high voltages or hazardous gas subsystems, and many different kinds of people involved, can be particularly dangerous. A set of modular hardware has been designed which makes possible a standardized, intergrated, hierarchical system's approach and which can be easily tailored to custom requirements

Wind energy technology: an option for a renewable clean environment energy. Low impact renewable energy: options for a clean environment and healthy Canadian economy

International Nuclear Information System (INIS)

Salmon, J.

1999-01-01

As Canada debates ways to address climate change, the country's low-impact renewable energy industries want to ensure that Canadians are provided with all of the options available to them. Accordingly, they have come together to create Options for a Clean Environment and Healthy Canadian Economy. Recognizing there is no 'silver bullet' solution to climate change, this document identifies an important suite of measures that, along with others, will allow Canada to achieve its long-term economic and environmental goals. The measures described in this document represent an investment in Canada's future. If implemented, they will reduce annual greenhouse gas (GHG) emissions by more than 12 million tonnes (Mt) by the year 2010 (roughly 8% of Canada's reduction target), create thousands of new jobs, and reduce health-care costs by millions of dollars each year. The most significant dividends from these measures, however, will occur after 2010 as a result of having set in motion fundamental changes in the attitudes of Canadians and the nature of the Canadian energy market. By 2020, the spin-off actions prompted by these measures will likely have resulted in GHG reductions twice as great as those achieved in 2010. This document highlights the opportunities associated specifically with Canada's low-impact renewable energy resources. These are non-fossil-fuel resources that are replenished through the earth's natural cycles and have a minimal impact on the environment and human health. They include wind, solar, earth energy, run-of-river hydro and sustainable biomass fuels. These resources can replace fossil fuels in a variety of areas, including electricity and space and water heating. Fuel cells, although not a renewable resource in themselves, are a promising technology that in combination with renewables have the potential to deliver versatile low-impact electricity. The document also identifies opportunities associated with the increased use of passive renewable energy

Simulation of indoor environment in low energy housing

DEFF Research Database (Denmark)

Vagiannis, Georgios; Knudsen, Henrik N.; Toftum, Jørn

2012-01-01

was selected and sensitivity analyses were conducted for the importance of occupancy, ventilation, window opening, and heat recovery efficiency. In particular occupancy and venting played significant roles for the indoor environment and energy consumption. It was also shown that with passive measures, but also...

Technological learning in energy-environment-economy modelling: A survey

International Nuclear Information System (INIS)

Kahouli-Brahmi, Sondes

2008-01-01

This paper aims at providing an overview and a critical analysis of the technological learning concept and its incorporation in energy-environment-economy models. A special emphasis is put on surveying and discussing, through the so-called learning curve, both studies estimating learning rates in the energy field and studies incorporating endogenous technological learning in bottom-up and top-down models. The survey of learning rate estimations gives special attention to interpreting and explaining the sources of variability of estimated rates, which is shown to be mainly inherent in R and D expenditures, the problem of omitted variable bias, the endogeneity relationship and the role of spillovers. Large-scale models survey show that, despite some methodological and computational complexity related to the non-linearity and the non-convexity associated with the learning curve incorporation, results of the numerous modelling experiments give several new insights with regard to the analysis of the prospects of specific technological options and their cost decrease potential (bottom-up models), and with regard to the analysis of strategic considerations, especially inherent in the innovation and energy diffusion process, in particular the energy sector's endogenous responses to environment policy instruments (top-down models)

Radioactivation of silicon tracker modules in high-luminosity hadron collider radiation environments

CERN Document Server

Dawson, I; Buttar, C; Cindro, V; Mandic, I

2003-01-01

One of the consequences of operating detector systems in harsh radiation environments will be radioactivation of the components. This will certainly be true in experiments such as ATLAS and CMS, which are currently being built to exploit the physics potential at CERN's Large Hadron Collider. If the levels of radioactivity and corresponding dose rates are significant, then there will be implications for any access or maintenance operations. This paper presents predictions for the radioactivation of ATLAS's Semi- Conductor Tracker (SCT) barrel system, based on both calculations and measurements. It is shown that both neutron capture and high-energy hadron reactions must be taken into account. The predictions also show that the SCT barrel-module should not pose any serious radiological problems after operation in high radiation environments.

[Nuclear energy and environment: review of the IAEA environmental projects].

Science.gov (United States)

Fesenko, S; Fogt, G

2012-01-01

The review of the environmental projects of the International Atomic Energy Agency is presented. Basic IAEA documents intended to protect humans and the Environment are considered and their main features are discussed. Some challenging issues in the area of protection of the Environment and man, including the impact of nuclear facilities on the environment, radioactive waste management, and remediation of the areas affected by radiological accidents, nuclear testing and sites of nuclear facilities are also discussed. The need to maintain the existing knowledge in radioecology and protection of the environment is emphasised.

Tech-X Corporation releases simulation code for solving complex problems in plasma physics : VORPAL code provides a robust environment for simulating plasma processes in high-energy physics, IC fabrications and material processing applications

CERN Multimedia

2005-01-01

Tech-X Corporation releases simulation code for solving complex problems in plasma physics : VORPAL code provides a robust environment for simulating plasma processes in high-energy physics, IC fabrications and material processing applications

NOVEL REFRACTORY MATERIALS FOR HIGH ALKALI, HIGH TEMPERATURE ENVIRONMENTS

Energy Technology Data Exchange (ETDEWEB)

Hemrick, James Gordon [ORNL; Smith, Jeffrey D [ORNL; O' Hara, Kelley [University of Missouri, Rolla; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.

2012-08-01

A project was led by Oak Ridge National Laboratory (ORNL) in collaboration with a research team comprised of the academic institution Missouri University of Science and Technology (MS&T), and the industrial company MINTEQ International, Inc. (MINTEQ), along with representatives from the aluminum, chemical, glass, and forest products industries. The project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al 2O3, MgAl2O4, or other similar spinel structured or alumina-based unshaped refractory compositions (castables, gunnables, shotcretes, etc.) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques (in-situ phase formation, altered conversion temperatures, accelerated reactions, etc). This family of refractory compositions would then be tailored for use in high-temperature, high-alkaline industrial environments like those found in the aluminum, chemical, forest products, glass, and steel industries. Both practical refractory development experience and computer modeling techniques were used to aid in the design of this new family of materials. The newly developed materials were expected to offer alternative material choices for high-temperature, high-alkali environments that were capable of operating at higher temperatures (goal of increasing operating temperature by 100-200oC depending on process) or for longer periods of time (goal of twice the life span of current materials or next process determined service increment). This would lead to less process down time, greater energy efficiency for associated manufacturing processes (more heat kept in process), and materials that could be installed/repaired in a more efficient manner. The overall project goal was a 5% improvement in energy efficiency (brought about through a 20% improvement in thermal efficiency) resulting in a savings of 3.7 TBtu/yr (7.2 billion ft3 natural gas) by the year 2030. Additionally, new

10. Symposium energy and environment - responsibility for the future

International Nuclear Information System (INIS)

2003-01-01

The symposium discussed important aspects relating to the subject of energy and environment. The detailed and well-funded lectures and statements were received with great interest by the 120 attendants. The discussion focused on problems of power generation and consumption, increased shares of renewable energy sources, ethical and theological questions. The symposium received funds from Deutsche Bundesstiftung Umwelt and was well accepted by the press [de

Modeling the effects of involvement and attitudes on energy industry pursuit intentions: A systems analysis of the university-industry environment

Science.gov (United States)

Gross, Jordan M.

The energy industry's struggle to attract and retain qualified employees continues to threaten the nation's economy, global competitiveness, and national security. Given the nationwide skills and labor shortage in the energy industry, this study was conducted in response to a need to identify causes of person-environment fit and its effects on engineering students' intentions to work in the energy industry after graduation. Structural equation modeling was used to examine the relationships between student inputs, environmental factors, and career-related outcomes. Two models were compared using data collected from 381 undergraduate engineering students from across the country. Results suggest that students who gained knowledge about professions in the energy industry from participating in an internship or co-op at an energy-related company perceived greater fit with the goals and values of the energy industry. In addition, this study found that students who perceive high levels of fit with the energy industry also have high industry attraction, which directly affects their energy industry pursuit intentions. Overall, this research indicates that high quality internships have the potential to increase students' perceived industry fit, which is closely tied to their career intentions. Outcomes of this study are expected to provide stakeholders with new insights to improve practices within the university-industry environment that will educate, promote, and sustain a strong energy workforce for years to come.

Norway's centres for environment-friendly energy research (CEERs)

Energy Technology Data Exchange (ETDEWEB)

2009-07-01

In February 2009 Norway's Minister of Petroleum and Energy announced the establishment of eight new Centres for Environment-friendly Energy Research (CEERs). The centres form national teams within the areas of offshore wind energy, solar energy, energy efficiency, bio energy, energy planning and design, and carbon capture and storage. These centres are: BIGCCS Centre - International CCS Research Centre; Centre for Environmental Design of Renewable Energy (CEDREN); Bioenergy Innovation Centre (CenBio); Norwegian Centre for Offshore Wind Energy (NORCOW E); Norwegian Research Centre for Offshore Wind Technology (NOWITECH); The Norwegian Research Centre for Solar Cell Technology; SUbsurface CO{sub 2} storage - Critical Elements and Superior Strategy (SUCCESS) The Research Centre on Zero Emission Buildings - ZEB (AG)

High energy neutron radiography

International Nuclear Information System (INIS)

Gavron, A.; Morley, K.; Morris, C.; Seestrom, S.; Ullmann, J.; Yates, G.; Zumbro, J.

1996-01-01

High-energy spallation neutron sources are now being considered in the US and elsewhere as a replacement for neutron beams produced by reactors. High-energy and high intensity neutron beams, produced by unmoderated spallation sources, open potential new vistas of neutron radiography. The authors discuss the basic advantages and disadvantages of high-energy neutron radiography, and consider some experimental results obtained at the Weapons Neutron Research (WNR) facility at Los Alamos

Environment. 1990-2001. International Atomic Energy Agency publications

International Nuclear Information System (INIS)

2001-05-01

This catalog lists all sales publications of the International Atomic Energy Agency dealing with the Environment, and issued during the period 1 January 1990 - 30 April 2001. Most publications are issued in English, though some are also available in other languages. These are noted in the catalogue

The determination of trainee teachers' conceptual frameworks about nuclear energy and environment

Energy Technology Data Exchange (ETDEWEB)

Aladag, C [Department of Geography, Faculty of Educational, University of Necmettin Erbakan, Kenya (Turkey)

2013-07-01

The aim of this study is to reveal the cognitive construction about the relationship between nuclear energy and environment of the undergraduates who have studied science of environment by using word association test and to determine the conception mistakes. The research was made on 81 trainee teachers who study at Ahmet Kelerlu Faculty of Education Department of Geography and Biology, University of Necmettin Erbakan on 2012-2013 academic year fall semester. In the study, it was seen that the topics which the undergraduates mostly refer in their written statements were the nuclear energy's indication of improvement of countries, its necessity, nuclear accidents, nuclear weapons and the ecocide. The other opinions which gained importance were nuclear reaction, nuclear raw material and countries producing nuclear energy. It's seen that nuclear accidents and nuclear weapons are very effective on the graduates' point of view. The opinions about nuclear energy's harm to the environment show that environmental awareness became of secondary importance. The written concepts about these two opinions are very close to each other by percentage. Mainly, the radiation effects caused by the nuclear accidents constitute the fundamental point of undergraduates' perception of environment. (author)

Energy Design Guidelines for High Performance Schools: Hot and Dry Climates (Revision)

Energy Technology Data Exchange (ETDEWEB)

2002-06-01

School districts around the country are finding that the smart energy choices can help them save money and provide healthier, more effective learning environments. By incorporating energy improvements into their construction or renovation plans, schools can significantly reduce energy consumption and costs. These savings can be redirected to educational needs such as additional teachers, instructional materials, or new computers. These design guidelines outline high performance principles for the new or retrofit design of your K-12 school. By incorporating these principles, you can create and exemplary building that is both energy and resource efficient.

Saving energy and protecting environment of electric vehicles

Science.gov (United States)

Yuan, Lina; Chen, Huajun; Gong, Jing

2017-05-01

With the concept of low carbon economy, saving energy, and protecting environment spread, the development of the electric promotes the research pace of wireless charging electronic vehicles, which will become the best choice of energy supply in the future. To generalize and exploit the corresponding alternative fuels and the research and development, and promotion of electric vehicles, becomes the effective means to directly reduce the consumption of fuel, effectively relieves the problem of nervous energy and environmental pollution, and really conforms to the requirements of the national strategy of sustainable development in China. This paper introduces the status of electronic cars and wireless charging, expounds the principle of wireless charging, and concludes the full text.

Energy demand, poverty and the urban environment in Jordan

International Nuclear Information System (INIS)

Jaber, J.O.; Probert, S.D.

2001-01-01

This paper presents some insights into the prime problems of energy and related environmental issues as well as urbanisation in Jordan. The country has very limited natural resources: water is scarce; arable land is limited; and fossil-fuel sources are few. Moreover, the population is increasing rapidly. Hence, problems are arising. During the last 30 years, the country has experienced vast changes in its infrastructure with respect to the housing, urbanisation, commerce, agriculture and industry. Such developments have led to increasing demographic stresses: unemployment has increased and poverty is experienced by more than half of the population. The pressures have resulted in a high percentage of the population moving from rural to urban areas and so society is becoming less self-sufficient. At present, energy consumption in the residential sector accounts for about one quarter of the kingdom's fuel consumption. Kerosene, bottled LPG, diesel fuel and electricity are the main forms of energy used by households, but kerosene is still the dominant fuel because about 83% of households depend on it for space and water heating. The use of open fires and/or portable stoves has led to an increasing number of people being killed each year by suffocation or suffering health problems due to the inhalation of fumes and gaseous pollutants. Thus a national plan to achieve energy thrift and protect the environment, as well as accomplish the more rational utilisation of the limited natural resources available, is urgently needed and should be enacted soon. (author)

Laser Science and Technology Program Annual Report-2002 NIF Programs Directorate

International Nuclear Information System (INIS)

Hackel, L; Chen, H L

2003-01-01

The Laser Science and Technology (LSandT) Program's mission is to develop advanced lasers, optics, materials technologies, and applications to solve problems and create new capabilities of importance to the nation and the Laboratory. A top, near-term priority is to provide technical support in the deployment and upgrade of the National Ignition Facility (NIF). Our other program activities synergistically develop technologies that are consistent with the goals of the NIF Directorate and develop state-of-the-art capabilities. The primary objectives of LSandT activities in 2002 have been fourfold--(a) to support deployment of hardware and to enhance laser and optics performance for NIF, (b) to develop high-energy petawatt laser science and technology for the Department of Energy (DOE), (c) to develop advanced solid-state laser systems and optical components for the Department of Defense (DoD), and (d) to invent, develop, and deliver improved concepts and hardware for other government agencies and industry. LSandT activities during 2002 focused on seven major areas: (1) NIF Project-LSandT led major advances in the deployment of NIF Final Optics Assembly (FOA) and the development of 30.1 optics processing and treatment technologies to enhance NIF's operations and performance capabilities. (2) Stockpile Stewardship Program (SSP)-LSandT personnel continued development of ultrashort-pulse lasers and high-power, large-aperture optics for applications in SSP, extreme-field science and national defense. To enhance the high-energy petawatt (HEPW) capability in NIF, LSandT continued development of advanced compressor-grating and front-end laser technologies utilizing optical-parametric chirped-pulse amplification (OPCPA). (3) High-energy-density physics and inertial fusion energy-LSandT continued development of kW- to MW-class, diode-pumped, solid-state laser (DPSSL). (4) Department of Defense (DoD)-LSandT continued development of a 100 kw-class solid-state heat-capacity laser

Highly transparent triboelectric nanogenerator for harvesting water-related energy reinforced by antireflection coating

Science.gov (United States)

Liang, Qijie; Yan, Xiaoqin; Gu, Yousong; Zhang, Kui; Liang, Mengyuan; Lu, Shengnan; Zheng, Xin; Zhang, Yue

2015-03-01

Water-related energy is an inexhaustible and renewable energy resource in our environment, which has huge amount of energy and is not largely dictated by daytime and sunlight. The transparent characteristic plays a key role in practical applications for some devices designed for harvesting water-related energy. In this paper, a highly transparent triboelectric nanogenerator (T-TENG) was designed to harvest the electrostatic energy from flowing water. The instantaneous output power density of the T-TENG is 11.56 mW/m2. Moreover, with the PTFE film acting as an antireflection coating, the maximum transmittance of the fabricated T-TENG is 87.4%, which is larger than that of individual glass substrate. The T-TENG can be integrated with silicon-based solar cell, building glass and car glass, which demonstrates its potential applications for harvesting waste water energy in our living environment and on smart home system and smart car system.

Journal of Sustainable Development of Energy, Water and Environment Systems - Volume II

Directory of Open Access Journals (Sweden)

Neven Duić

2014-12-01

Full Text Available The Journal of Sustainable Development of Energy, Water and Environment Systems – JSDEWES is an international journal dedicated to the improvement and dissemination of knowledge on methods, policies and technologies for increasing the sustainability of development by de-coupling growth from natural resources and replacing them with knowledge based economy, taking into account its economic, environmental and social pillars, as well as methods for assessing and measuring sustainability of development, regarding energy, transport, water, environment and food production systems and their many combinations. In total 32 manuscripts were published in Volume II, all of them reviewed by at least two reviewers. The Journal of Sustainable Development of Energy, Water and Environment Systems would like to thank reviewers for their contribution to the quality of the published manuscripts.

MEE-project: One year of public relations on the environment and energy. MEE-projekt: Een jaar voorlichten over milieu en energie

Energy Technology Data Exchange (ETDEWEB)

Anon.

1991-06-26

A final overview is presented of the MEE-project ('Milieu- En Energie projekt' or Environmental and Energy project). The MEE-project was aimed at stimulating energy saving and improving the public attitude concerning energy and the environment. The project is also considered as an employment project for the unemployed. The main target group of the project was the households in the Dutch municipality Heerhugowaard. Five persons in search of employment offered interested private households options to save energy and the environment within their own surroundings by means of information and documentation. 5610 information packets were delivered. The costs did not exceed 115,000 Dutch guilders. The overall conclusion is positive: the people of the municipality are active in trying to save energy and the environment. Four of the five project members have new and better perspectives for a job.

Upgrade of the compact neutron spectrometer for high flux environments

Science.gov (United States)

Osipenko, M.; Bellucci, A.; Ceriale, V.; Corsini, D.; Gariano, G.; Gatti, F.; Girolami, M.; Minutoli, S.; Panza, F.; Pillon, M.; Ripani, M.; Trucchi, D. M.

2018-03-01

In this paper new version of the 6Li-based neutron spectrometer for high flux environments is described. The new spectrometer was built with commercial single crystal Chemical Vapour Deposition diamonds of electronic grade. These crystals feature better charge collection as well as higher radiation hardness. New metal contacts approaching ohmic conditions were deposited on the diamonds suppressing build-up of space charge observed in the previous prototypes. New passive preamplification of the signal at detector side was implemented to improve its resolution. This preamplification is based on the RF transformer not sensitive to high neutron flux. The compact mechanical design allowed to reduce detector size to a tube of 1 cm diameter and 13 cm long. The spectrometer was tested in the thermal column of TRIGA reactor and at the DD neutron generator. The test results indicate an energy resolution of 300 keV (FWHM), reduced to 72 keV (RMS) excluding energy loss, and coincidence timing resolution of 160 ps (FWHM). The measured data are in agreement with Geant4 simulations except for larger energy loss tail presumably related to imperfections of metal contacts and glue expansion.

Proceedings of the International Symposium on Renewable Energy: Environment Protection and Energy Solution

International Nuclear Information System (INIS)

2006-12-01

The International Symposium and Exhibition on Renewable Energy 2003 organized by the Malaysian Institute of Energy (INTEM), the Malaysia Energy centre (PTM), Islamic Scientific, Education, and Cultural Organization (ISESCO), World Renewable Energy Network (WREN), Ministry of Energy, Communication and Multimedia, and the Ministry of Education, Malaysia has the following objectives (a) highlighting the role of renewable in meeting the energy demand particularly of developing countries (b) encouraging the effective transfer and efficient application of economic renewable energy technologies (c) assisting in the promotion of the environmental benefits of renewable energy (d) promoting business opportunities for renewable energy projects and their successful implementation (e) enhancing improved information, knowledge and education on renewable energy (f) providing a technical exhibition where manufacturers, suppliers and others can display their products and services and finally (h) providing a focal points for international networking. The topics covered are Solar Materials, Solar Thermal Applications, Photovoltaic technology, Biomass Conversion, Hydrogen and Fuel Cells, Wind Energy, Hydro Energy, Climate and the Environment, Low Energy Architecture, related Topics (Energy Management; Economics, Policy and Financing; Sustainable Energy Business Practices, Carbon tax and trading, Gender and Poverty Reduction). A total of 97 papers have been received from countries such as Malaysia, United States of America, United Kingdom, Azerbaijan, Bangladesh, Armenia, Romania, Denmark, Bahrain, Iraq, Italy, Saudi Arabia, Egypt, Libya, Australia, Brunei, Belgium, New Zealand, Indonesia, Singapore, Thailand, India, Iran, Russia, and Turkey

The energy for the 21. century: techniques, economy and environment

International Nuclear Information System (INIS)

2000-01-01

12 papers have been presented. 1) Climate changing. The atmospheric circulation model coupled to the ocean model is the most powerful current tool to explain climate processes and to validate possible climate evolutions. 2) Health hazards due to the combustion of fossil fuels. The effects of atmospheric particles on mortality, cancer risks and on respiratory organs, are considered. 3) The evaluation of external effects of transport on the environment. The paper gives examples of exposure-response function relating to impacts on the built environment, atmospheric visibility, vegetation and human health. 4) Energy consumption and economic growth. 5) Impact of low radiation doses on human health. 6) Hydrogen: production methods and costs. 7) Fossil energies reserves: incertitude on definition, volume and forecasting. 8) Energetic valorization of biomass by thermo-chemical way. 9) Technical and economic aspects of wind energy. 10) Nuclear energy: the French example. 11) The future of photovoltaic energy, its actual growth rate is about 25-35 % a year and its main asset is to benefit technological progress that allows a sharp 50 % cut in costs every 10 years. 12) Fuel cells, their operating principle, the fuel used, their applications and perspective. (A.C.)

High to ultra-high power electrical energy storage.

Science.gov (United States)

Sherrill, Stefanie A; Banerjee, Parag; Rubloff, Gary W; Lee, Sang Bok

2011-12-14

High power electrical energy storage systems are becoming critical devices for advanced energy storage technology. This is true in part due to their high rate capabilities and moderate energy densities which allow them to capture power efficiently from evanescent, renewable energy sources. High power systems include both electrochemical capacitors and electrostatic capacitors. These devices have fast charging and discharging rates, supplying energy within seconds or less. Recent research has focused on increasing power and energy density of the devices using advanced materials and novel architectural design. An increase in understanding of structure-property relationships in nanomaterials and interfaces and the ability to control nanostructures precisely has led to an immense improvement in the performance characteristics of these devices. In this review, we discuss the recent advances for both electrochemical and electrostatic capacitors as high power electrical energy storage systems, and propose directions and challenges for the future. We asses the opportunities in nanostructure-based high power electrical energy storage devices and include electrochemical and electrostatic capacitors for their potential to open the door to a new regime of power energy.

Gonadal transcriptome alterations in response to dietary energy intake: sensing the reproductive environment.

Directory of Open Access Journals (Sweden)

Bronwen Martin

Full Text Available Reproductive capacity and nutritional input are tightly linked and animals' specific responses to alterations in their physical environment and food availability are crucial to ensuring sustainability of that species. We have assessed how alterations in dietary energy intake (both reductions and excess, as well as in food availability, via intermittent fasting (IF, affect the gonadal transcriptome of both male and female rats. Starting at four months of age, male and female rats were subjected to a 20% or 40% caloric restriction (CR dietary regime, every other day feeding (IF or a high fat-high glucose (HFG diet for six months. The transcriptional activity of the gonadal response to these variations in dietary energy intake was assessed at the individual gene level as well as at the parametric functional level. At the individual gene level, the females showed a higher degree of coherency in gonadal gene alterations to CR than the males. The gonadal transcriptional and hormonal response to IF was also significantly different between the male and female rats. The number of genes significantly regulated by IF in male animals was almost 5 times greater than in the females. These IF males also showed the highest testosterone to estrogen ratio in their plasma. Our data show that at the level of gonadal gene responses, the male rats on the IF regime adapt to their environment in a manner that is expected to increase the probability of eventual fertilization of females that the males predict are likely to be sub-fertile due to their perception of a food deficient environment.

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

International Nuclear Information System (INIS)

Islam, S.; Huda, A.-U.

1999-01-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Proper utilization of solar energy in Bangladesh: effect on the environment, food supply and the standard of living

Energy Technology Data Exchange (ETDEWEB)

Islam, S.; Huda, A.-U. [University of Dhaka (Bangladesh). Physics Dept.

1999-06-01

The only really sustainable form of energy is solar energy. The densely populated tropical countries can do very well from this completely sustainable energy source without any novel technologies. Most of the commercial energy used worldwide is supplied by using non-renewable resources. Environmental damage - global warming, ozone hole, noise, chemical and radioactive waste - is due to high energy use. Environmental deterioration is a direct consequence of wealth generated and sustained by extremely cheap fossil fuel. The price of fossil fuel does not include the cost for the deterioration of the environment. We show in this paper that even a densely populated country like Bangladesh can attain a high standard of living by a proper utilization of solar energy. We suggest that poor tropical countries should mobilize their resources to develop solar technology. (author)

Competitive dynamics of energy, environment, and economy in the U.S

International Nuclear Information System (INIS)

Pao, Hsiao-Tien; Chen, Haipeng; Li, Yi-Ying

2015-01-01

This paper applies the Lotka–Volterra model to investigate the competitive interactions among energy, environment, and economy (3Es) in the U.S. The proposed LV-COMSUD (Lotka–Volterra COmpetition Model for SUstainable Development) has satisfactory performance for model fitting and provides a useful multivariate framework to predict outcomes concerning these interactions. Our key findings include a pure competition between emissions and GDP (Gross Domestic Product), neutralisms between renewable and fossil/nuclear energy, and commensalisms between GDP and renewable/fossil energy and between nuclear energy and fossil energy/emissions. These results indicate that renewable/fossil energy use contributes to GDP and interacts indirectly with emissions, that an environmental Kuznets curve exists, and that the amount of produced nuclear energy correlates with emission. The U.S. is dependent on non-clean energy sources and its energy efficiency has room for improvement. The results provide unique insights for policy makers to craft up sustainable economic development plans. Overall, it is suggested that for developed markets such as the U.S., to enhance energy security and mitigate climate changes, improving energy efficiency and developing low-carbon clean energy should be top priorities. - Highlights: • The competitive interactions among energy, environment, and economy are examined. • A pure competition between emissions and GDP exists and an EKC exists. • Energy use contributes to GDP and interacts indirectly with emissions. • Nuclear energy was used to tackle the growth of emissions/fossil energy use. • Improved energy efficiency is a viable policy to enhance energy security in U.S

High-energy detector

Science.gov (United States)

Bolotnikov, Aleksey E [South Setauket, NY; Camarda, Giuseppe [Farmingville, NY; Cui, Yonggang [Upton, NY; James, Ralph B [Ridge, NY

2011-11-22

The preferred embodiments are directed to a high-energy detector that is electrically shielded using an anode, a cathode, and a conducting shield to substantially reduce or eliminate electrically unshielded area. The anode and the cathode are disposed at opposite ends of the detector and the conducting shield substantially surrounds at least a portion of the longitudinal surface of the detector. The conducting shield extends longitudinally to the anode end of the detector and substantially surrounds at least a portion of the detector. Signals read from one or more of the anode, cathode, and conducting shield can be used to determine the number of electrons that are liberated as a result of high-energy particles impinge on the detector. A correction technique can be implemented to correct for liberated electron that become trapped to improve the energy resolution of the high-energy detectors disclosed herein.

Energy Systems High-Pressure Test Laboratory | Energy Systems Integration

Science.gov (United States)

Facility | NREL Energy Systems High-Pressure Test Laboratory Energy Systems High-Pressure Test Laboratory In the Energy Systems Integration Facility's High-Pressure Test Laboratory, researchers can safely test high-pressure hydrogen components. Photo of researchers running an experiment with a hydrogen fuel

Energy, environment and technological innovation

Directory of Open Access Journals (Sweden)

Fernando José Pereira da Costa

2015-08-01

Full Text Available The development problems can not be addressed without taking account of the environmental and energy issues, as well as the intimate relationship and the intense interaction between the two. In fact, the energy issue can not be analyzed separately from environmental issues, nor the advances in technological innovation, integrating dynamic-systemic way and so positioning address the issue of the development model to set the bulge the transition process experienced by the world since the seventies of the twentieth century. This transition, in turn, implies the passage of Paradigm of Fossil Fuels to Renewable Energy also called the Paradigm of renewable sources of energy, not just holding the energy problem, but towards to environmental and technological components. It is within this relatively slow and long process, instigator of high levels of volatility, turbulence inducing and motor of technological innovation, which is (re raises the question of the development model that defines how a new model/style development.

HIGH-ENERGY COSMIC-RAY DIFFUSION IN MOLECULAR CLOUDS: A NUMERICAL APPROACH

International Nuclear Information System (INIS)

Fatuzzo, M.; Melia, F.; Todd, E.; Adams, F. C.

2010-01-01

The propagation of high-energy cosmic rays (CRs) through giant molecular clouds constitutes a fundamental process in astronomy and astrophysics. The diffusion of CRs through these magnetically turbulent environments is often studied through the use of energy-dependent diffusion coefficients, although these are not always well motivated theoretically. Now, however, it is feasible to perform detailed numerical simulations of the diffusion process computationally. While the general problem depends upon both the field structure and particle energy, the analysis may be greatly simplified by dimensionless analysis. That is, for a specified purely turbulent field, the analysis depends almost exclusively on a single parameter-the ratio of the maximum wavelength of the turbulent field cells to the particle gyration radius. For turbulent magnetic fluctuations superimposed over an underlying uniform magnetic field, particle diffusion depends on a second dimensionless parameter that characterizes the ratio of the turbulent to uniform magnetic field energy densities. We consider both of these possibilities and parametrize our results to provide simple quantitative expressions that suitably characterize the diffusion process within molecular cloud environments. Doing so, we find that the simple scaling laws often invoked by the high-energy astrophysics community to model CR diffusion through such regions appear to be fairly robust for the case of a uniform magnetic field with a strong turbulent component, but are only valid up to ∼50 TeV particle energies for a purely turbulent field. These results have important consequences for the analysis of CR processes based on TeV emission spectra associated with dense molecular clouds.

Method for design of low-energy type houses based on simulations of indoor environment and energy use

DEFF Research Database (Denmark)

Vanhoutteghem, Lies

2013-01-01

with current and future energy requirements, the influence of window size, type and orientation on space heating demand and thermal indoor environment were investigated in EnergyPlus by comparing a window design with an even distribution (same glazingto-floor-area in each room) with a traditional window design....... Charts illustrating a space of solutions for space heating demand defined by targets for daylight and thermal indoor environment were used to discuss the effect of different window parameters and potential conflicts related to window design were identified in deep or narrow southoriented side-lit rooms...

Very high energy colliders

International Nuclear Information System (INIS)

Richter, B.

1986-03-01

The luminosity and energy requirements are considered for both proton colliders and electron-positron colliders. Some of the basic design equations for high energy linear electron colliders are summarized, as well as design constraints. A few examples are given of parameters for very high energy machines. 4 refs., 6 figs

Sustainability concept for energy, water and environment systems

International Nuclear Information System (INIS)

Afgan, N.H.

2004-01-01

This review is aimed to introduce historical background for the sustainability concept development for energy, water and environment systems. In the assessment of global energy and water resources attention is focussed in on the resource consumption and its relevancy to the future demand. In the review of the sustainability concept development special emphasize is devoted to the definition of sustainability and its relevancy to the historical background of the sustainability idea. In order to introduce measuring of sustainability the attention is devoted to the definition of respective criteria. There have been a number of attempts to define the criterions for the assessment of the sustainability of the market products. Having those criterions as bases, it was introduced a specific application in the energy system design

Impacts of non-nuclear energy sources on the environment

International Nuclear Information System (INIS)

Tavkaya, E.

2006-01-01

Fossil fuels (i.e., petroleum, natural gas and coal) , which meet most of the world's energy demand today, are being depleted fast. Also, their combustion products are causing the global problems, such as the greenhouse effect, ozone layer depletion, acid rains and pollution, which are posing great danger for our environment and eventually for the life in our planet. If humankind is going to have a future on this planet, at least a high-technology future, with a significant population of several billions of humans continuing to inhabit the Earth, it is absolutely inevitable that we will have to find another energy source. Table 1: The environmental effects for some energy systems; SOURCES: Fossil fuels (petroleum, natural gas and coal) ENVIRONMENTAL EFFECTS : - Ozone layer depletion - Changes of atmospheric conditions - Decrease of air quality (Coal , petroleum) - Acid rains and destroy of forests (coal, petroleum ) - Pollution from toxic wastes (coal ash, slag and smoke hole gases) - Pollution of surface water - Seaside and sea pollutions (petroleum) - Terrain devolution - Large amount of fuel and transportation requirements - Sources depletion SOURCES: Hydroelectric ENVIRONMENTAL EFFECTS - Large area requirements - Population situation changes - Erosion and usage changes - Ecosystem changes and health effects - Disappearing of biological variety - Downfall of dams - Leave out of production SOURCES: Renewable (sun, wind, geothermal, biomass) ENVIRONMENTAL EFFECTS : - Decrease of air quality (geothermal, biomass) - Large area usage - Ecologic system changes - Fabrication effects (CO 2 effect due to production of photovoltaic cells that work with sun) - Noise (wind) SOURCES: Nuclear (All energy chain) ENVIRONMENTAL EFFECTS : - Radioactive oscillation because of serious reactor accident - Radiation of waste storage. In this study, the environmental effects for some energy systems are investigated with all details

Cleanroom energy benchmarking in high-tech and biotech industries

International Nuclear Information System (INIS)

Tschudi, William; Benschine, Kathleen; Fok, Stephen; Rumsey, Peter

2001-01-01

Cleanrooms, critical to a wide range of industries, universities, and government facilities, are extremely energy intensive. Consequently, energy represents a significant operating cost for these facilities. Improving energy efficiency in cleanrooms will yield dramatic productivity improvement. But more importantly to the industries which rely on cleanrooms, base load reduction will also improve reliability. The number of cleanrooms in the US is growing and the cleanroom environmental systems' energy use is increasing due to increases in total square footage and trends toward more energy intensive, higher cleanliness applications. In California, many industries important to the State's economy utilize cleanrooms. In California these industries utilize over 150 cleanrooms with a total of 4.2 million sq. ft. (McIlvaine). Energy intensive high tech buildings offer an attractive incentive for large base load energy reduction. Opportunities for energy efficiency improvement exist in virtually all operating cleanrooms as well as in new designs. To understand the opportunities and their potential impact, Pacific Gas and Electric Company sponsored a project to benchmark energy use in cleanrooms in the electronics (high-tech) and biotechnology industries. Both of these industries are heavily dependent intensive cleanroom environments for research and manufacturing. In California these two industries account for approximately 3.6 million sq. ft. of cleanroom (McIlvaine, 1996) and 4349 GWh/yr. (Sartor et al. 1999). Little comparative energy information on cleanroom environmental systems was previously available. Benchmarking energy use allows direct comparisons leading to identification of best practices, efficiency innovations, and highlighting previously masked design or operational problems

Management of energy-save and environment on the boiler system

International Nuclear Information System (INIS)

Ishiyama, Toru; Asano, Naoki; Kawasaki, Ichio

2010-02-01

Tokai Utility Center (TUC) is the facility that products and feeds steam for Tokai Reprocessing Plant (TRP), Plutonium Fuel Production Facility (PFPF), etc. The boiler system needs the management based on the law of 'Industrial safety and Health Act' and 'Act on the Regulation of Nuclear Source Material, Nuclear Fuel Material and Reactors'. In this situation, activity of preservation of environment and energy-save are carried out by means of the improvement of steam generation process and the change of additive to water. Quality assurance procedure has been applied in order to improve the boiler operation continuously. This report describes about various activities of the management, the environment, the energy-saving, and a future action. (author)

High-energy neutron dosimetry at the Clinton P. Anderson Meson Physics Facility

International Nuclear Information System (INIS)

Mallett, M.W.; Vasilik, D.G.; Littlejohn, G.J.; Cortez, J.R.

1990-01-01

Neutron energy spectrum measurements performed at the Clinton P. Anderson Meson Physics Facility indicated potential areas for high energy neutron exposure to personnel. The low sensitivity of the Los Alamos thermoluminescent dosimeter (TLD) to high energy neutrons warranted issuing a NTA dosimeter in addition to the TLD badge to employees entering these areas. The dosimeter consists of a plastic holder surrounding NTA film that has been desiccated and sealed in a dry nitrogen environment. A study of the fading of latent images in NTA film demonstrated the success of this packaging method to control the phenomenon. The Los Alamos NTA dosimeter is characterized and the fading study discussed. 10 refs., 4 figs., 2 tabs

Lightweight Sensor Authentication Scheme for Energy Efficiency in Ubiquitous Computing Environments.

Science.gov (United States)

Lee, Jaeseung; Sung, Yunsick; Park, Jong Hyuk

2016-12-01

The Internet of Things (IoT) is the intelligent technologies and services that mutually communicate information between humans and devices or between Internet-based devices. In IoT environments, various device information is collected from the user for intelligent technologies and services that control the devices. Recently, wireless sensor networks based on IoT environments are being used in sectors as diverse as medicine, the military, and commerce. Specifically, sensor techniques that collect relevant area data via mini-sensors after distributing smart dust in inaccessible areas like forests or military zones have been embraced as the future of information technology. IoT environments that utilize smart dust are composed of the sensor nodes that detect data using wireless sensors and transmit the detected data to middle nodes. Currently, since the sensors used in these environments are composed of mini-hardware, they have limited memory, processing power, and energy, and a variety of research that aims to make the best use of these limited resources is progressing. This paper proposes a method to utilize these resources while considering energy efficiency, and suggests lightweight mutual verification and key exchange methods based on a hash function that has no restrictions on operation quantity, velocity, and storage space. This study verifies the security and energy efficiency of this method through security analysis and function evaluation, comparing with existing approaches. The proposed method has great value in its applicability as a lightweight security technology for IoT environments.

Social science literature on the environment: review and prospects for energy studies. A preliminary literature survey

Energy Technology Data Exchange (ETDEWEB)

Sommers, P.

1975-01-01

Much of the social science literature on environment is of recent origin and represents the response of the social science research community to a complex societal problem in which technology is a major factor. Energy represents another such problem to which the social science research community is now turning its attention. Because energy problems and environment problems have some similarities and because energy-conversion processes have large effects on the environment, a review of the social science literature on environment was undertaken. The purposes of this review are as follows: (1) to study the possible utility in energy research of some of the concepts developed in social science research on the environment; (2) to study the possible utility in energy research of some of the methodologies utilized in social science research on the environment; and (3) to study the extent to which the results of social science research on the environment have contributed to the development of policy. The first two items above receive major attention in this preliminary literature survey. 50 references.

Issues - II. Renewable energies and environment law: the exploitation of renewable energies or when the implementation of a measure aimed at the protection of the environment impacts the environment; water as a renewable energy source: to which price?

International Nuclear Information System (INIS)

Cans, Chantal; Boucheix, Philippe

2012-01-01

A first article discusses the different impacts that renewable energies may have on the environment, i.e. on the human environment (risks associated with dams, aesthetic impacts, impacts on landscapes, neighbouring nuisances) or on the natural environment (natural media, wildlife and flora). A second article outlines that the legal framework of hydroelectricity is rather old and therefore ignored (willingly or not?) environmental concerns whereas environmental impacts actually exist. Therefore, a new legal context must be defined, notably by taking into account objectives defined in the international and European Union law, in particularly the requirements related to ecological continuity

Review of methodologies and polices for evaluation of energy efficiency in high energy-consuming industry

International Nuclear Information System (INIS)

Li, Ming-Jia; Tao, Wen-Quan

2017-01-01

Highlights: • The classification of the industrial energy efficiency index has been summarized. • The factors of energy efficiency and their implement in industries are discussed. • Four main evaluation methodologies of energy efficiency in industries are concluded. • Utilization of the methodologies in energy efficiency evaluations are illustrated. • Related polices and suggestions based on energy efficiency evaluations are provided. - Abstract: Energy efficiency of high energy-consuming industries plays a significant role in social sustainability, economic performance and environmental protection of any nation. In order to evaluate the energy efficiency and guide the sustainability development, various methodologies have been proposed for energy demand management and to measure the energy efficiency performance accurately in the past decades. A systematical review of these methodologies are conducted in the present paper. First, the classification of the industrial energy efficiency index has been summarized to track the previous application studies. The single measurement indicator and the composite index benchmarking are highly recognized as the modeling tools for power industries and policy-making in worldwide countries. They are the pivotal figures to convey the fundamental information in energy systems for improving the performance in fields such as economy, environment and technology. Second, the six factors that influence the energy efficiency in industry are discussed. Third, four major evaluation methodologies of energy efficiency are explained in detail, including stochastic frontier analysis, data envelopment analysis, exergy analysis and benchmarking comparison. The basic models and the developments of these methodologies are introduced. The recent utilization of these methodologies in the energy efficiency evaluations are illustrated. Some drawbacks of these methodologies are also discussed. Other related methods or influential indicators

Building Environment Analysis Based on Temperature and Humidity for Smart Energy Systems

Directory of Open Access Journals (Sweden)

Kwang-Ho Won

2012-10-01

Full Text Available In this paper, we propose a new HVAC (heating, ventilation, and air conditioning control strategy as part of the smart energy system that can balance occupant comfort against building energy consumption using ubiquitous sensing and machine learning technology. We have developed ZigBee-based wireless sensor nodes and collected realistic temperature and humidity data during one month from a laboratory environment. With the collected data, we have established a building environment model using machine learning algorithms, which can be used to assess occupant comfort level. We expect the proposed HVAC control strategy will be able to provide occupants with a consistently comfortable working or home environment.

Building environment analysis based on temperature and humidity for smart energy systems.

Science.gov (United States)

Yun, Jaeseok; Won, Kwang-Ho

2012-10-01

In this paper, we propose a new HVAC (heating, ventilation, and air conditioning) control strategy as part of the smart energy system that can balance occupant comfort against building energy consumption using ubiquitous sensing and machine learning technology. We have developed ZigBee-based wireless sensor nodes and collected realistic temperature and humidity data during one month from a laboratory environment. With the collected data, we have established a building environment model using machine learning algorithms, which can be used to assess occupant comfort level. We expect the proposed HVAC control strategy will be able to provide occupants with a consistently comfortable working or home environment.

Synergy between low and high energy radical femtochemistry

International Nuclear Information System (INIS)

Gauduel, Y A

2011-01-01

The deleterious effects of ionizing radiation on integrated biological targets being dependent on the spatio-temporal distribution of short-lived radical processes, a thorough knowledge of these early events requires a real-time probing in the range 10 -15 - 10 -10 s. This manuscript review is focused on the synergy that exists between low (1-10 eV) and high (MeV) energy radiation femtochemistry (LERF, HERF respectively). The synergy remains crucial for the investigation of primary radical processes that take place within the prethermal regime of low energy secondary electrons. The quantum character of very-short lived electron in a prehydrated configuration provides a unique sub-nanometric probe to spatially explore some early radiation-induced biomolecular damage. This approach would foreshadow the development of innovative applications for spatio-temporal radiation biology such as, i) a highly-selective pro-drug activation using well-defined quantum states of short-lived radicals, ii) the real-time nanodosimetry in biologically relevant environments, and iii) the ultrashort irradiation of living cells.

Ose evaluation of delay systems in a high threat environment

International Nuclear Information System (INIS)

Rich, B.L.; Cook, B.G.

1988-01-01

The Office of Security Evaluations (OSE) has in place an Evaluation Program to assist the Department of Energy (DOE) Headquarters and operations office managers by assessing specific elements of protection programs and informing the managers of common strengths and weaknesses of these elements. This information is provided so that sufficient and cost effective protection programs are maintained or enhanced. The subject of this paper is the evaluation of delay systems in the high-threat environment defined for sensitive DOE security interests such as special nuclear materials, nuclear weapons, and related classified devices and information

High energy physics advisory panel's subpanel on vision for the future of high-energy physics

International Nuclear Information System (INIS)

1994-05-01

This report was requested by the Secretary of Energy to (1) define a long-term program for pursuing the most important high-energy physics goals since the termination of the Superconducting Super Collider (SSC) project, (2) assess the current US high-energy physics program, and (3) make recommendations regarding the future of the field. Subjects on which recommendations were sought and which the report addresses were: high-energy physics funding priorities; facilitating international collaboration for future construction of large high-energy physics facilities; optimizing uses of the investment made in the SSC; how to encourage displaced scientists and engineers to remain in high-energy physics and to attract young scientists to enter the field in the future. The report includes a description of the state of high-energy physics research in the context of history, a summary of the SSC project, and documentation of the report's own origins and development

Evaluation of the Wave Energy Conversion Efficiency in Various Coastal Environments

Directory of Open Access Journals (Sweden)

Eugen Rusu

2014-06-01

Full Text Available The main objective of the present work was to assess and compare the wave power resources in various offshore and nearshore areas. From this perspective, three different groups of coastal environments were considered: the western Iberian nearshore, islands and an enclosed environment with sea waves, respectively. Some of the most representative existent wave converters were evaluated in the analysis and a second objective was to compare their performances at the considered locations, and in this way to determine which is better suited for potential commercial exploitation. In order to estimate the electric power production expected in a certain location, the bivariate distributions of the occurrences corresponding to the sea states, defined by the significant wave height and the energy period, were constructed in each coastal area. The wave data were provided by hindcast studies performed with numerical wave models or based on measurements. The transformation efficiency of the wave energy into electricity is evaluated via the load factor and also through the capture width, defined as the ratio between the electric power estimated to be produced by each specific wave energy converters (WEC and the expected wave power corresponding to the location considered. Finally, by evaluating these two different indicators, comparisons of the performances of three WEC types (Aqua Buoy, Pelamis and Wave Dragon in the three different groups of coastal environments considered have been also carried out. The work provides valuable information related to the effectiveness of various technologies for the wave energy extraction that would operate in different coastal environments.

Integrating Quantitative Reasoning into STEM Courses Using an Energy and Environment Context

Science.gov (United States)

Myers, J. D.; Lyford, M. E.; Mayes, R. L.

2010-12-01

Many secondary and post-secondary science classes do not integrate math into their curriculum, while math classes commonly teach concepts without meaningful context. Consequently, students lack basic quantitative skills and the ability to apply them in real-world contexts. For the past three years, a Wyoming Department of Education funded Math Science Partnership at the University of Wyoming (UW) has brought together middle and high school science and math teachers to model how math and science can be taught together in a meaningful way. The UW QR-STEM project emphasizes the importance of Quantitative Reasoning (QR) to student success in Science, Technology, Engineering and Mathematics (STEM). To provide a social context, QR-STEM has focused on energy and the environment. In particular, the project has examined how QR and STEM concepts play critical roles in many of the current global challenges of energy and environment. During four 3-day workshops each summer and over several virtual and short face-to-face meetings during the academic year, UW and community college science and math faculty work with math and science teachers from middle and high schools across the state to improve QR instruction in math and science classes. During the summer workshops, faculty from chemistry, physics, earth sciences, biology and math lead sessions to: 1) improve the basic science content knowledge of teachers; 2) improve teacher understanding of math and statistical concepts, 3) model how QR can be taught by engaging teachers in sessions that integrate math and science in an energy and environment context; and 4) focus curricula using Understanding by Design to identify enduring understandings on which to center instructional strategies and assessment. In addition to presenting content, faculty work with teachers as they develop classroom lessons and larger units to be implemented during the school year. Teachers form interdisciplinary groups which often consist of math and

Optical Response of Metakaolin after Ultraviolet and High Energy Electron Exposure

Directory of Open Access Journals (Sweden)

B. T. Cesul

2014-01-01

Full Text Available Metakaolin, which is part of a class of inorganic polymers called geopolymers, is being tested currently for its use as a lightweight mirror material in spacecraft applications. Metakaolin, as with most geopolymers, has the advantages of low initial coefficient of thermal expansion, easy preparation at room temperature and pressure, and high specific strength. Even though metakaolin has been known as a structural material for millennia, it has not been properly vetted for use as a material in spacecraft applications, especially with respect to exposure to its environments. This research highlights one particular aspect of response to the space environment; that is, how do the optical properties of metakaolin change after subjugation to bombardment by ultraviolet and high energy electron radiation? These two radiation sources are common in low earth orbit and a primary cause of degradation of organic polymers in space. Photospectroscopic analysis showed that ultraviolet in combination with high energy electrons causes changes in the metakaolin which need to be accounted for due to their potential impacts on the thermal management of a spacecraft and during application in composite mirror structures.

Sustainability of environment-assisted energy transfer in quantum photobiological complexes

Energy Technology Data Exchange (ETDEWEB)

Zloshchastiev, Konstantin G. [Institute of Systems Science, Durban University of Technology (South Africa)

2017-09-15

It is shown that quantum sustainability is a universal phenomenon which emerges during environment-assisted electronic excitation energy transfer (EET) in photobiological complexes (PBCs), such as photosynthetic reaction centers and centers of melanogenesis. We demonstrate that quantum photobiological systems must be sustainable for them to simultaneously endure continuous energy transfer and keep their internal structure from destruction or critical instability. These quantum effects occur due to the interaction of PBCs with their environment which can be described by means of the reduced density operator and effective non-Hermitian Hamiltonian (NH). Sustainable NH models of EET predict the coherence beats, followed by the decrease of coherence down to a small, yet non-zero value. This indicates that in sustainable PBCs, quantum effects survive on a much larger time scale than the energy relaxation of an exciton. We show that sustainable evolution significantly lowers the entropy of PBCs and improves the speed and capacity of EET. (copyright 2017 by WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

Neutron activation analysis applied to energy and environment

International Nuclear Information System (INIS)

Lyon, W.S.

1975-01-01

Neutron activation analysis was applied to a number of problems concerned with energy production and the environment. Burning of fossil fuel, the search for new sources of uranium, possible presence of toxic elements in food and water, and the relationship of trace elements to cardiovascular disease are some of the problems in which neutron activation was used. (auth)

Proceedings of the international conference on environment and energy: souvenir

International Nuclear Information System (INIS)

2014-01-01

The theme of the conference has great relevance to address various emerging Environmental and Energy issues under growing economies of developing countries like India. Energy consumption and environmental protection go hand-in-hand, and pollution problems posed by the use of fossil fuels are major concern throughout world. Global consensus has now emerged on the need for implementation of radical technological and structural changes on both the generation and energy usage sectors in-order to protect the environment even as we maintain economic growth where renewable and clean energy technologies are expected to play vital role. Papers relevant to INIS are indexed separately

Quo vadis code optimization in high energy physics

International Nuclear Information System (INIS)

Jarp, S.

1994-01-01

Although performance tuning and optimization can be considered less critical than in the past, there are still many High Energy Physics (HEP) applications and application domains that can profit from such an undertaking. In CERN's CORE (Centrally Operated RISC Environment) where all major RISC vendors are present, this implies an understanding of the various computer architectures, instruction sets and performance analysis tools from each of these vendors. This paper discusses some initial observations after having evaluated the situation and makes some recommendations for further progress

Dynamic assessment of urban economy-environment-energy system using system dynamics model: A case study in Beijing.

Science.gov (United States)

Wu, Desheng; Ning, Shuang

2018-07-01

Economic development, accompanying with environmental damage and energy depletion, becomes essential nowadays. There is a complicated and comprehensive interaction between economics, environment and energy. Understanding the operating mechanism of Energy-Environment-Economy model (3E) and its key factors is the inherent part in dealing with the issue. In this paper, we combine System Dynamics model and Geographic Information System to analyze the energy-environment-economy (3E) system both temporally and spatially, which explicitly explore the interaction of economics, energy, and environment and effects of the key influencing factors. Beijing is selected as a case study to verify our SD-GIS model. Alternative scenarios, e.g., current, technology, energy and environment scenarios are explored and compared. Simulation results shows that, current scenario is not sustainable; technology scenario is applicable to economic growth; environment scenario maintains a balanced path of development for long term stability. Policy-making insights are given based on our results and analysis. Copyright © 2018 Elsevier Inc. All rights reserved.

High-power density miniscale power generation and energy harvesting systems

International Nuclear Information System (INIS)

Lyshevski, Sergey Edward

2011-01-01

This paper reports design, analysis, evaluations and characterization of miniscale self-sustained power generation systems. Our ultimate objective is to guarantee highly-efficient mechanical-to-electrical energy conversion, ensure premier wind- or hydro-energy harvesting capabilities, enable electric machinery and power electronics solutions, stabilize output voltage, etc. By performing the advanced scalable power generation system design, we enable miniscale energy sources and energy harvesting technologies. The proposed systems integrate: (1) turbine which rotates a radial- or axial-topology permanent-magnet synchronous generator at variable angular velocity depending on flow rate, speed and load, and, (2) power electronic module with controllable rectifier, soft-switching converter and energy storage stages. These scalable energy systems can be utilized as miniscale auxiliary and self-sustained power units in various applications, such as, aerospace, automotive, biotechnology, biomedical, and marine. The proposed systems uniquely suit various submersible and harsh environment applications. Due to operation in dynamic rapidly-changing envelopes (variable speed, load changes, etc.), sound solutions are researched, proposed and verified. We focus on enabling system organizations utilizing advanced developments for various components, such as generators, converters, and energy storage. Basic, applied and experimental findings are reported. The prototypes of integrated power generation systems were tested, characterized and evaluated. It is documented that high-power density, high efficiency, robustness and other enabling capabilities are achieved. The results and solutions are scalable from micro (∼100 μW) to medium (∼100 kW) and heavy-duty (sub-megawatt) auxiliary and power systems.

Archaeal Viruses from High-Temperature Environments.

Science.gov (United States)

Munson-McGee, Jacob H; Snyder, Jamie C; Young, Mark J

2018-02-27

Archaeal viruses are some of the most enigmatic viruses known, due to the small number that have been characterized to date. The number of known archaeal viruses lags behind known bacteriophages by over an order of magnitude. Despite this, the high levels of genetic and morphological diversity that archaeal viruses display has attracted researchers for over 45 years. Extreme natural environments, such as acidic hot springs, are almost exclusively populated by Archaea and their viruses, making these attractive environments for the discovery and characterization of new viruses. The archaeal viruses from these environments have provided insights into archaeal biology, gene function, and viral evolution. This review focuses on advances from over four decades of archaeal virology, with a particular focus on archaeal viruses from high temperature environments, the existing challenges in understanding archaeal virus gene function, and approaches being taken to overcome these limitations.

Archaeal Viruses from High-Temperature Environments

Directory of Open Access Journals (Sweden)

Jacob H. Munson-McGee

2018-02-01

Full Text Available Archaeal viruses are some of the most enigmatic viruses known, due to the small number that have been characterized to date. The number of known archaeal viruses lags behind known bacteriophages by over an order of magnitude. Despite this, the high levels of genetic and morphological diversity that archaeal viruses display has attracted researchers for over 45 years. Extreme natural environments, such as acidic hot springs, are almost exclusively populated by Archaea and their viruses, making these attractive environments for the discovery and characterization of new viruses. The archaeal viruses from these environments have provided insights into archaeal biology, gene function, and viral evolution. This review focuses on advances from over four decades of archaeal virology, with a particular focus on archaeal viruses from high temperature environments, the existing challenges in understanding archaeal virus gene function, and approaches being taken to overcome these limitations.

Economy, energy and environment - Methods to analyze connections; Ekonomi, energi och miljoe - metoder att analysera samband

Energy Technology Data Exchange (ETDEWEB)

Ahlroth, Sofia; Finnveden, Goeran; Hochschorner Elisabeth [Royal Inst. of Technology, Stockholm (Sweden). Dept. of Industrial Ecology; Ekvall, Thomas [Chalmers Univ. of Technology, Goeteborg (Sweden). Dept. of Energy Systems Technology; Wadeskog, Anders; Palm, Viveka [Statistics Sweden, Stockholm (Sweden). Environmental Accounts

2003-12-01

This report gives a review of instruments that can be used for finding economic, structural and environmental effects of decisions in the environmental area, and describe what is possible to achieve, economically and technically. Twelve different aspects are used for characterizing the instruments. Applications and limitations of the instruments are discussed. For many instruments there exists a lively discussion on their weaknesses and limitations. We focus on system analytical instruments, i.e. environment-economic methods, energy and energy-economic modelling and environment-system-analytical tools In the economic area we discuss I/O-analyses, CGE-models and econometric models as well as a few descriptive analytica tools: Cost-benefit analysis, CBA and Life Cycle Analyses.

High Energy Physics Model Database - HEPMDB - Towards decoding the underlying theory at the LHC

International Nuclear Information System (INIS)

Bondarenko, M.; Belyaev, A.; Basso, L.; Boos, E.; Bunichev, V.; Sekhar Chivukula, R.; Christensen, D.; Cox, S.; De Roeck, A.; Moretti, S.; Pukhov, A.; Sekmen, S.; Semenov, A.; Simmons, E.H.; Shepherd-Themistocleus, C.; Speckner, C.

2012-01-01

We present here the first stage of development of the High Energy Physics Model Data-Base (HEPMDB) which is a convenient centralized storage environment for HEP (High Energy Physics) models, and can accommodate, via web interface to the HPC cluster, the validation of models, evaluation of LHC predictions and event generation-simulation chain. The ultimate goal of HEPMDB is to perform an effective LHC data interpretation isolating the most successful theory for explaining LHC observations. (authors)

Energy in the environment and the second law of thermodynamics

Science.gov (United States)

Mueller, R. F.

1972-01-01

The relationship between the consumption of energy by technological cultures and the second law of thermodynamics is discussed. The analysis is based on a description of the operation of a mechanical device which consumes energy. It is concluded that the flow of energy in manifold spontaneous conditions, which play a vital role in the operation of any technological process, remove most of the energy flow path from the control of the operator. It is stated that the increased efficiency of a process can benefit the environment only as much as this efficiency enables the total energy input to be reduced for a given level of production and increasing efficiency cannot meet the problems of an increased rate of energy utilization.

Some aspects of Italian energy systems and the effects on the environment

International Nuclear Information System (INIS)

Morici, Alessandro

1998-01-01

The priority goals of the Italian energy system in 1998 were; energy savings, protection of the environment and human health, development of domestic resource, diversification of energy sources and suppliers, international competitiveness of the energy system. Current and future actions include: energy conservation measures, energy developments, national plan for sustainable development implementing national program for limiting carbon related emissions to 1990 level by year 2000, and periodic reports to comply with the requirements of convention on climatic change

Searching for 4th generation fermions at high-energy e+e- machines

International Nuclear Information System (INIS)

Dorfan, J.; Van Kooten, R.J.

1987-05-01

This writeup summarizes Monte Carlo studies on the feasibility of searching for 4th family fermions at high energy e + e - machines. By high energy it is meant at energies beyond the Z 0 ; the Z 0 searches having been studied extensively by the SLC and LEP collaborations. The specific examples of √s = 200 GeV (namely LEP200) and √s = 600 GeV (in line with work being done at SLAC to investigate the potential of a future linear collider) were chosen. The studies have been performed with the four vectors produced by the models and no attempt has been made to account for the effects of finite resolution and inefficiencies due to a real detector environment

Wind energy in a competitive electricity supply environment

Energy Technology Data Exchange (ETDEWEB)

Strbac, G; Jenkins, N [Manchester Centre for Electrical Energy, Manchester (United Kingdom)

1996-12-31

In the UK, there has been an increasing interest in the commercial aspects of the impact of wind energy on transmission and distribution networks. In a competitive electricity supply environment, mechanisms for pricing network services are considered to be the main vehicle for evaluating that impact. This article reviews the major pricing strategies based on embedded costs, short and long run marginal costing theory as well as time-of-use pricing, and comments on the influence of each particular strategy on the calculated value of wind energy. Also, prospective tools for evaluating savings in capital and operating network costs due to wind generation, are identified. (author)

Wind energy in a competitive electricity supply environment

Energy Technology Data Exchange (ETDEWEB)

Strbac, G.; Jenkins, N. [Manchester Centre for Electrical Energy, Manchester (United Kingdom)

1995-12-31

In the UK, there has been an increasing interest in the commercial aspects of the impact of wind energy on transmission and distribution networks. In a competitive electricity supply environment, mechanisms for pricing network services are considered to be the main vehicle for evaluating that impact. This article reviews the major pricing strategies based on embedded costs, short and long run marginal costing theory as well as time-of-use pricing, and comments on the influence of each particular strategy on the calculated value of wind energy. Also, prospective tools for evaluating savings in capital and operating network costs due to wind generation, are identified. (author)

Thermal dynamic simulation of wall for building energy efficiency under varied climate environment

Science.gov (United States)

Wang, Xuejin; Zhang, Yujin; Hong, Jing

2017-08-01

Aiming at different kind of walls in five cities of different zoning for thermal design, using thermal instantaneous response factors method, the author develops software to calculation air conditioning cooling load temperature, thermal response factors, and periodic response factors. On the basis of the data, the author gives the net work analysis about the influence of dynamic thermal of wall on air-conditioning load and thermal environment in building of different zoning for thermal design regional, and put forward the strategy how to design thermal insulation and heat preservation wall base on dynamic thermal characteristic of wall under different zoning for thermal design regional. And then provide the theory basis and the technical references for the further study on the heat preservation with the insulation are in the service of energy saving wall design. All-year thermal dynamic load simulating and energy consumption analysis for new energy-saving building is very important in building environment. This software will provide the referable scientific foundation for all-year new thermal dynamic load simulation, energy consumption analysis, building environment systems control, carrying through farther research on thermal particularity and general particularity evaluation for new energy -saving walls building. Based on which, we will not only expediently design system of building energy, but also analyze building energy consumption and carry through scientific energy management. The study will provide the referable scientific foundation for carrying through farther research on thermal particularity and general particularity evaluation for new energy saving walls building.

Impact of the Surrounding Built Environment on Energy Consumption in Mixed-Use Building

Directory of Open Access Journals (Sweden)

Young-Eun Woo

2018-03-01

Full Text Available While a mixture of residential and non-residential uses in urban development has advantages in reducing transportation energy consumption and improving efficiency of land utilization, the patterns of energy consumption in mixed-use buildings are largely unknown. To understand associations between the built environment and energy consumption and to find effective strategies for energy saving, this study aims to examine how the gas and electricity energy consumption of mixed-use properties is influenced by the characteristics of the immediate surroundings of the building as well as by the building’s attributes. The sample for this study is 22,109 mixed-use buildings in Seoul, Korea and the main source of outcome is electricity and gas energy consumption data retrieved from the open system of building data in 2015 and 2016. The regression results showed that a higher proportion of non-residential uses in mixed-use buildings was positively associated with higher electricity consumption overall but that it reduced gas energy use during the winter. In particular, increased restaurant and service use significantly influenced electricity consumption in the buildings. With regard to surrounding built environment, higher impervious surfaces and dense development near the buildings increased the electricity consumption of the buildings but it reduced gas energy consumption. Our results imply that, through the mediating effects of UHIs, the built environment characteristics of immediate surroundings may have indirect effects on energy consumption in mixed-use buildings.

Energy Consumption and Indoor Environment Predicted by a Combination of Computational Fluid Dynamics and Building Energy Performance Simulation

DEFF Research Database (Denmark)

Nielsen, Peter Vilhelm

2003-01-01

An interconnection between a building energy performance simulation program and a Computational Fluid Dynamics program (CFD) for room air distribution is introduced for improvement of the predictions of both the energy consumption and the indoor environment.The article describes a calculation...

III international congress, energy, environment and technological innovation. Proceedings

Energy Technology Data Exchange (ETDEWEB)

NONE

1995-12-31

The first volume covers: energy, transportation systems and planning; treatment, disposal and effective use of urban waste; treatment and recovery of industrial effluents; and new materials for bioclimatic architecture - energy saving and environmental protection. Topics covered in the second volume are: heavy and extraheavy oils - production, transportation and marketing; heavy and extraheavy oils, residues and bitumen - chemistry, treatment and upgrading; mining and environmental protection; assessing and managing environmental risks in the energy sector; natural disasters impact on civil constructions; and energy autonomy in isolated communities. The last volume discusses: impact of climate change on water and forest resources; urban policies - planning informal settlements and environmental problems; sustainable development, environmental conservation and protection; and electronic systems for the environment. Selected papers have been abstracted separately on the IEA Coal Research CD-ROM.

Comfort, Energy Efficiency and Adoption of Personal Cooling Systems in Warm Environments: A Field Experimental Study.

Science.gov (United States)

He, Yingdong; Li, Nianping; Wang, Xiang; He, Meiling; He, De

2017-11-17

It is well known that personal cooling improves thermal comfort and save energy. This study aims to: (1) compare different personal cooling systems and (2) understand what influences users' willingness to adopt them. A series of experiments on several types of personal cooling systems, which included physical measurements, questionnaires and feedback, was conducted in a real office environment. The obtained results showed that personal cooling improved comfort of participants in warm environments. Then an improved index was proposed and used to compare different types of personal cooling systems in terms of comfort and energy efficiency simultaneously. According to the improved index, desk fans were highly energy-efficient, while the hybrid personal cooling (the combination of radiant cooling desk and desk fan) consumed more energy but showed advantages of extending the comfortable temperature range. Moreover, if personal cooling was free, most participants were willing to adopt it and the effectiveness was the main factor influencing their willingness, whereas if participants had to pay, they probably refused to adopt it due to the cost and the availability of conventional air conditioners. Thus, providing effective and free personal cooling systems should be regarded as a better way for its wider application.

Energy taxes, environment and competitiveness

International Nuclear Information System (INIS)

Munksgaard, J.; Gaern Hansen, L.; Bech-Ravn, C.; Ramskov, J.L.

2006-11-01

Economic theory about foreign trade and competition as well as empirical studies of relevance are not making evident that industries in general should pay lower environmental taxes than other kind of consumers. Consequently, economic theory cannot justify the present Danish energy tax regime where households are required to pay high energy taxes whereas industries are allowed to pay low energy taxes. On the contrary, it is more likely that reduced industry taxes will result in reduced welfare to society, lower income and lower employment as compared to a scenario of equal energy taxes. Theory can justify, however, a stepwise introduction of green taxes in order to make industries and markets adapt to the new regulatory framework. Moreover, some theoretical contributions argue that under certain circumstances one could point to a need for protecting certain kinds of industries (e.g. industries employing unskilled labour), but an exclusive tax reduction given to all industries is not supported by economic theory. By using the GTAP model we have calculated the welfare effect of levelling Danish energy taxes so households and industries have to pay equal energy taxes. The GTAP model has a good and international reputation for being designed to analyse international trade and competitiveness. We find that levelling the Danish energy taxes will increase welfare in Denmark by 1.3% equivalent to DKK 8 billion. The Danish energy tax reform, however, will cause an increase in CO 2 emissions in neighbouring countries. The calculation does not consider the influence of the EU market for tradable CO 2 permits introduced as from January 2005. (au)

Towards a novel laser-driven method of exotic nuclei extraction−acceleration for fundamental physics and technology

Energy Technology Data Exchange (ETDEWEB)

Nishiuchi, M., E-mail: sergei@jaea.go.jp; Sakaki, H.; Esirkepov, T. Zh. [Japan Atomic Energy Agency, Kansai Photon Science Institute (Japan); Nishio, K. [Japan Atomic Energy Agency, Advanced Science Research Center (Japan); Pikuz, T. A.; Faenov, A. Ya. [Japan Atomic Energy Agency, Kansai Photon Science Institute (Japan); Skobelev, I. Yu. [Russian Academy of Sciences, Joint Institute for High Temperature (Russian Federation); Orlandi, R. [Japan Atomic Energy Agency, Advanced Science Research Center (Japan); Pirozhkov, A. S.; Sagisaka, A.; Ogura, K.; Kanasaki, M.; Kiriyama, H.; Fukuda, Y. [Japan Atomic Energy Agency, Kansai Photon Science Institute (Japan); Koura, H. [Japan Atomic Energy Agency, Advanced Science Research Center (Japan); Kando, M. [Japan Atomic Energy Agency, Kansai Photon Science Institute (Japan); Yamauchi, T. [Graduate School of Maritime Sciences (Japan); Watanabe, Y. [Kyushu University, Interdisciplinary Graduate School of Engineering Sciences (Japan); Bulanov, S. V., E-mail: svbulanov@gmail.com; Kondo, K. [Japan Atomic Energy Agency, Kansai Photon Science Institute (Japan); and others

2016-04-15

A combination of a petawatt laser and nuclear physics techniques can crucially facilitate the measurement of exotic nuclei properties. With numerical simulations and laser-driven experiments we show prospects for the Laser-driven Exotic Nuclei extraction–acceleration method proposed in [M. Nishiuchi et al., Phys, Plasmas 22, 033107 (2015)]: a femtosecond petawatt laser, irradiating a target bombarded by an external ion beam, extracts from the target and accelerates to few GeV highly charged short-lived heavy exotic nuclei created in the target via nuclear reactions.

Utica Shale Energy and Environment Laboratory Final Scientific/Technical Report

Energy Technology Data Exchange (ETDEWEB)

Cole, David Robert [The Ohio State Univ., Columbus, OH (United States); Allen, Gerald Robert [The Ohio State Univ., Columbus, OH (United States)

2017-12-29

The Ohio State University (OSU) was awarded a contract on October 1, 2014, from the Department of Energy National Energy Technology Laboratory (DOE-NETL) to develop the Utica Shale Energy and Environment Laboratory (USEEL) in the Utica-Point Pleasant shale play of the Appalachian Basin. It was designed to be an environmental and technology development lab that would enable the academic, industry, government, and non-governmental organization (NGO) research communities to better understand unconventional oil and gas (UOG) engineering practices and technology to increase production and safety, and decrease environmental effects. Political and economic consequences necessitated changes in project site location and design, from the Ohio State Eastern Agricultural Research Station (EARS) and the Muskingum Watershed Conservancy District (MWCD) in east-central Ohio to a site located at an Energy Corporation of America (ECA) Marcellus drill pad in Greene County, Pennsylvania. Although the overall project progressed little beyond planning and administration before termination on September 18, 2017, significant research and MS or PhD investigations were completed or continue today. An experimental study design for site specific and regional baseline assessments was developed utilizing ecoregions, United States Geological Survey (USGS) Hydraulic Unit Code watersheds, and GIS technology and databases. This can be utilized to build a defensible and scalable management and research framework for UOG investigations that can be extrapolated for predictive and comparative analyses. The most commonly mentioned perceived risks of shale energy development identified in a socioeconomic analysis included impacts to the environment and water resources, traffic and road deterioration, and crime. Economic benefits, such as the windfall wealth to residents, job opportunities, and the demand for hotels and restaurants emerged, as the main positive impact to the community. Preliminary results

Potential applications of biotechnology in the energy and the environment sectors

Energy Technology Data Exchange (ETDEWEB)

Chakrabarty, A.M.

1988-06-01

Biotechnological approaches to solving some of the problems of environmental pollution or developing better or alternate sources of energy are considered realistic and technically feasible within the near future. Some of the potential applications of biotechnology of interest to chemists in the energy and the environment sectors are considered briefly in this article.

A Novel Energy-Aware Distributed Clustering Algorithm for Heterogeneous Wireless Sensor Networks in the Mobile Environment.

Science.gov (United States)

Gao, Ying; Wkram, Chris Hadri; Duan, Jiajie; Chou, Jarong

2015-12-10

In order to prolong the network lifetime, energy-efficient protocols adapted to the features of wireless sensor networks should be used. This paper explores in depth the nature of heterogeneous wireless sensor networks, and finally proposes an algorithm to address the problem of finding an effective pathway for heterogeneous clustering energy. The proposed algorithm implements cluster head selection according to the degree of energy attenuation during the network's running and the degree of candidate nodes' effective coverage on the whole network, so as to obtain an even energy consumption over the whole network for the situation with high degree of coverage. Simulation results show that the proposed clustering protocol has better adaptability to heterogeneous environments than existing clustering algorithms in prolonging the network lifetime.

Proceedings of the fourth High-Energy Physics International Conference HEP-MAD 09

International Nuclear Information System (INIS)

Narison, S.

2009-01-01

This is the 4th of the series of HEP-MAD conference organized regularly every 2 or 3 years in Madagascar, in alternance to the traditional series of QCD-conference held in Montpellier (France) on July. The conference is expected to involve few numbers of physicists from abroad and equal numbers of experimental and theoretical high-energy physicists.Unlike the QCD conference which is a specialized meeting, HEP-MAD aims to have a wide view of physics: from High-Energy to Astro Physics. National contributions cover Nuclear and Environment Physics and the new form of energies (solar,...). This conference is a compromise between a standard one where specialized topics are presented and an introductory school to each subjects.It gives the opportunuity for high-energy physicists to promote the field of high-energy physics (theory and experiments)in Madagascar. In the same time, the meeting will permit to the participants to discover the country (well-known about its bio-diversity and rare animal and plant species) and its tradition and population from different origins.The theoretical and experimental talks cover different aspects of high-energy physics which are in the form of introductional reviews to the field, short contributions and posters. These talks are complemented by other national talks in other areas of physics. The Conference is expected to be published on-line by SLAC in a eConf-proceedings.

Dosimetry of high energy radiation

CERN Document Server

Sahare, P D

2018-01-01

High energy radiation is hazardous to living beings and a threat to mankind. The correct estimation of the high energy radiation is a must and a single technique may not be very successful. The process of estimating the dose (the absorbed energy that could cause damages) is called dosimetry. This book covers the basic technical knowledge in the field of radiation dosimetry. It also makes readers aware of the dangers and hazards of high energy radiation.

The energy for the 21. century: techniques, economy and environment; Energie au 21. siecle: techniques, economie, environnement

Energy Technology Data Exchange (ETDEWEB)

NONE

2000-07-01

12 papers have been presented. 1) Climate changing. The atmospheric circulation model coupled to the ocean model is the most powerful current tool to explain climate processes and to validate possible climate evolutions. 2) Health hazards due to the combustion of fossil fuels. The effects of atmospheric particles on mortality, cancer risks and on respiratory organs, are considered. 3) The evaluation of external effects of transport on the environment. The paper gives examples of exposure-response function relating to impacts on the built environment, atmospheric visibility, vegetation and human health. 4) Energy consumption and economic growth. 5) Impact of low radiation doses on human health. 6) Hydrogen: production methods and costs. 7) Fossil energies reserves: incertitude on definition, volume and forecasting. 8) Energetic valorization of biomass by thermo-chemical way. 9) Technical and economic aspects of wind energy. 10) Nuclear energy: the French example. 11) The future of photovoltaic energy, its actual growth rate is about 25-35 % a year and its main asset is to benefit technological progress that allows a sharp 50 % cut in costs every 10 years. 12) Fuel cells, their operating principle, the fuel used, their applications and perspective. (A.C.)

High energy physics advisory panel`s subpanel on vision for the future of high-energy physics

Energy Technology Data Exchange (ETDEWEB)

1994-05-01

This report was requested by the Secretary of Energy to (1) define a long-term program for pursuing the most important high-energy physics goals since the termination of the Superconducting Super Collider (SSC) project, (2) assess the current US high-energy physics program, and (3) make recommendations regarding the future of the field. Subjects on which recommendations were sought and which the report addresses were: high-energy physics funding priorities; facilitating international collaboration for future construction of large high-energy physics facilities; optimizing uses of the investment made in the SSC; how to encourage displaced scientists and engineers to remain in high-energy physics and to attract young scientists to enter the field in the future. The report includes a description of the state of high-energy physics research in the context of history, a summary of the SSC project, and documentation of the report`s own origins and development.

Study on Chinese model of low carbon economy-energy-electricity-environment

Energy Technology Data Exchange (ETDEWEB)

Hu, Zhaoguang

2010-09-15

With the successful experience on energy efficiency in the past 30 years in China, it can be summarized as Energy Usage Management(EUM) and Integrated Resource Strategic Planning(IRSP). They will play essential role in Low Carbon Economy. The model of Low Carbon Economy-Energy-Electricity-Environment and an outlook of Chinese economic growth, energy-electricity demand, and renewable energy generation have been studied in this paper. It has been shown that China would save energy 4.38 billion toe and reduce CO2 emission 16.55 billion ton by EUM, and would save energy 1.5 billion toe and reduce CO2 emission 5.7 Btons by IRSP during 2010-2030.

High energy hadron scattering

International Nuclear Information System (INIS)

Johnson, R.C.

1980-01-01

High energy and small momentum transfer 2 'yields' 2 hadronic scattering processes are described in the physical framework of particle exchange. Particle production in high energy collisions is considered with emphasis on the features of inclusive reactions though with some remarks on exclusive processes. (U.K.)

High- and middle-energy geothermics

International Nuclear Information System (INIS)

Anon.

1995-01-01

High and middle energy geothermal resources correspond to temperature intervals of 220-350 C and 90-180 C, respectively, and are both exploited for electricity production. Exploitation techniques and applications of high and of middle energy geothermics are different. High energy geothermics is encountered in active volcanic and tectonic zones, such as the circum-Pacific fire-belt, the lesser Antilles, the peri-Mediterranean Alpine chain or the African rift zone. The geothermal steam is directly expanded in a turbine protected against gas and minerals corrosion. About 350 high energy plants are distributed in more than 20 different countries and represent 6000 M We. The cost of high energy installed geothermal kWh ranges from 0.20 to 0.50 French Francs. Middle energy geothermics is encountered in sedimentary basins (between 2000 and 4000 m of depth), in localized fractured zones or at lower depth in the high energy geothermal fields. Heat exchangers with organic fluid Rankine cycle technology is used to produce electricity. Unit power of middle energy plants generally ranges from few hundreds of k W to few MW and correspond to a worldwide installed power of about 400 M We. The annual progression of geothermal installed power is estimated to 4 to 8 % in the next years and concerns principally the circum-Pacific countries. In France, geothermal resources are mainly localized in overseas departments. (J.S.). 3 photos

Policy analysis for energy efficiency in the built environment in Spain

International Nuclear Information System (INIS)

Yearwood Travezan, Jessica; Harmsen, Robert; Toledo, Gideon van

2013-01-01

Energy efficiency is considered one of the most cost effective ways to enhance security of energy supply and reduce greenhouse gas emissions. According to Europe's Energy Efficiency Plan, the biggest energy savings potential in the EU lies in the built environment. However, the many barriers to energy efficiency have prevented the implementation of the existing potential so far. This paper evaluates the existing policy instruments aimed at energy efficiency in buildings in Spain as laid down in the 2nd National Energy Efficiency Action Plan (NEEAP). The results show that the current policy package is insufficient to yield the existing energy savings potential in this sector. As much of the savings potential can be found in existing buildings and realization of this potential very much relies on voluntary action, the renovation sector is in need of an appropriate financial framework that mobilizes sufficient public and private financial resources, and transparent and efficient mechanisms to ensure the return on investment and payments from those who benefit from the renovation. Such financial framework needs to be supported by a regulatory framework that is tuned to existing buildings and an organizational framework that effectively connects the different policy layers in Spain. - Highlights: • We evaluate Spain's policies for efficiency improvement in the built environment. • We show that the policy measures in the 2nd NEEAP are insufficient to realize the savings potential. • Especially, the policy package for existing buildings needs to be strengthened

High-power density miniscale power generation and energy harvesting systems

Energy Technology Data Exchange (ETDEWEB)

Lyshevski, Sergey Edward [Department of Electrical and Microelectronics Engineering, Rochester Institute of Technology, Rochester, NY 14623-5603 (United States)

2011-01-15

This paper reports design, analysis, evaluations and characterization of miniscale self-sustained power generation systems. Our ultimate objective is to guarantee highly-efficient mechanical-to-electrical energy conversion, ensure premier wind- or hydro-energy harvesting capabilities, enable electric machinery and power electronics solutions, stabilize output voltage, etc. By performing the advanced scalable power generation system design, we enable miniscale energy sources and energy harvesting technologies. The proposed systems integrate: (1) turbine which rotates a radial- or axial-topology permanent-magnet synchronous generator at variable angular velocity depending on flow rate, speed and load, and, (2) power electronic module with controllable rectifier, soft-switching converter and energy storage stages. These scalable energy systems can be utilized as miniscale auxiliary and self-sustained power units in various applications, such as, aerospace, automotive, biotechnology, biomedical, and marine. The proposed systems uniquely suit various submersible and harsh environment applications. Due to operation in dynamic rapidly-changing envelopes (variable speed, load changes, etc.), sound solutions are researched, proposed and verified. We focus on enabling system organizations utilizing advanced developments for various components, such as generators, converters, and energy storage. Basic, applied and experimental findings are reported. The prototypes of integrated power generation systems were tested, characterized and evaluated. It is documented that high-power density, high efficiency, robustness and other enabling capabilities are achieved. The results and solutions are scalable from micro ({proportional_to}100 {mu}W) to medium ({proportional_to}100 kW) and heavy-duty (sub-megawatt) auxiliary and power systems. (author)

Investigation of building energy autonomy in the sahelian environment

International Nuclear Information System (INIS)

Coulibaly, O; Koulidiati, J; Ouedraogo, A; Kuznik, F; Baillis, D

2012-01-01

In this study, the energy generation of a set of photovoltaic panels is compared with the energy load of a building in order to analyse its autonomy in the sahelian environment when taking into account, the orientation, the insulation and the energy transfer optimisation of its windows. The Type 56 TRNSYS multizone building model is utilized for the energy load simulation and the Type 94 model of the same code enables the coupling of photovoltaic (PV) panels with the building. Without insulation, the PV energy generation represents 73.52 and 111.79% of the building electric energy load, respectively for poly-crystalline and mono-crystalline panels. For the same PV characteristics and when we insulate the roof and the floor, the energy generation increases to represent successively 121.09 and 184.13%. In the meantime, for building without insulation and with insulate the roof, the floor and 2 cm insulated walls, the energy consumption ratios decrease respectively from 201.13 to 105.20 kWh/m 2 /year. The investigations finally show that it is even possible to generate excess energy (positive energy building) and reduce the number and incident surface area of the PV panels if we conjugate the previous model with building passive architectural design mode (orientation, solar protection ...).

Energy/environment 112/98 italian law. From model to feasibility

International Nuclear Information System (INIS)

Amorosino, S.; Mennella, M.

1998-01-01

In this paper reported some considerations related to the organization and management in matter of energy and environment in regional and local government. Administrative procedures, organizational models and feasibility in the italian regions are reported [it

Energy, The Environment And Astronomy: Education And Action

Science.gov (United States)

Rodgers, Bernadette; Doppmann, G.; Kalas, P.; Lacy, J.; Beck, T.; Marshall, P. J.

2010-01-01

The specter of global climate change is arguably the most pressing scientific, social and ethical issue of our time. Although the relatively small field of astronomy represents only a fraction of the total human carbon emissions, astronomers have a great potential, and therefore perhaps a great responsibility, to educate themselves and the public on this issue. In addition, the average per capita carbon emissions of professional astronomers are not small, and our profession can do much to reduce its energy consumption and maximize the cost-benefit ratio of our work. At the January AAS meeting, we are organizing a half-day splinter meeting titled "Energy, the Environment and Astronomy: Education and Action". The focus will be on energy conservation and education as it relates to professional astronomy. Education focuses on informing ourselves, our students and the general public with which we interact, about the real issues, the necessary actions, and the likely consequences of various energy consumption and carbon emission scenarios. Action focuses on effective energy conservation and renewable energy initiatives within professional astronomy. Air travel, solar energy at ground-based observatories, and Gemini's "Green Initiative” are among the topics that will be discussed. The splinter meeting will be open to all and will include expert speakers from outside astronomy, contributed talks by astronomers, and a discussion session.

Energy technologies and the environment: Environmental information handbook

Energy Technology Data Exchange (ETDEWEB)

1988-10-01

This revision of Energy Technologies and the Environment reflects the changes in energy supply and demand, focus of environmental concern, and emphasis of energy research and development that have occurred since publication of the earlier edition in 1980. The increase in availability of oil and natural gas, at least for the near term, is responsible in part for a reduced emphasis on development of replacement fuels and technologies. Trends in energy development also have been influenced by an increased reliance on private industry initiatives, and a correspondingly reduced government involvement, in demonstrating more developed technologies. Environmental concerns related to acid rain and waste management continue to increase the demand for development of innovative energy systems. The basic criteria for including a technology in this report are that (1) the technology is a major current or potential future energy supply and (2) significant changes in employing or understanding the technology have occurred since publication of the 1980 edition. Coal is seen to be a continuing major source of energy supply, and thus chapters pertaining to the principal coal technologies have been revised from the 1980 edition (those on coal mining and preparation, conventional coal-fired power plants, fluidized-bed combustion, coal gasification, and coal liquefaction) or added as necessary to include emerging technologies (those on oil shale, combined-cycle power plants, coal-liquid mixtures, and fuel cells).

Superconducting magnets in high energy physics

International Nuclear Information System (INIS)

Prodell, A.G.

1978-01-01

The applications of superconducting magnets in high energy physics in the last ten years have made feasible developments which are vital to high energy research. These developments include high magnetic field, large volume detectors, such as bubble chambers, required for effective resolution of high energy particle trajectories, particle beam transport magnets, and superconducting focusing and bending magnets for the very high energy accelerators and storage rings needed to pursue the study of interactions between elementary particles. The acceptance of superconductivity as a proven technology in high energy physics was reinforced by the recognition that the existing large accelerators using copper-iron magnets had reached practical limits in terms of magnetic field intensity, cost, space, and energy usage, and that large-volume, high-field, copper-iron magnets were not economically feasible. Some of the superconducting magnets and associated systems being used in and being developed for high energy physics are described

High energy colliders