WorldWideScience

Sample records for high-concentration barium sulphate

  1. Bacterial Reduction Of Barium Sulphate By Sulphate-Reducing Bacteria

    Directory of Open Access Journals (Sweden)

    Luptáková Alena

    2015-12-01

    Full Text Available Acid mine drainage (AMD is a worldwide problem leading to contamination of water sources. AMD are characterized by low pH and high content of heavy metals and sulphates. The barium salts application presents one of the methods for the sulphates removing from AMD. Barium chloride, barium hydroxide and barium sulphide are used for the sulphates precipitation in the form of barium sulphate. Because of high investment costs of barium salts, barium sulphide is recycled from barium sulphate precipitates. It can be recycled by thermic or bacterial reduction of barium sulphate. The aim of our study was to verify experimentally the possibility of the bacterial transformation of BaSO4 to BaS by sulphate-reducing bacteria. Applied BaSO4 came from experiments of sulphates removal from Smolnik AMD using BaCl2.

  2. Sulphate removal from industrial effluents through barium sulphate precipitation

    CSIR Research Space (South Africa)

    Swanepoel, H

    2011-11-01

    Full Text Available into physical (membrane filtration, adsorption/ion exchange), chemical (chemical precipitation) and biological sulphate reduction processes. A literature study was conducted in order to compare these different methods. The ABC (Alkali - Barium - Calcium... ................................................ 6 2.2.1. Membrane filtration.......................................................................................... 6 2.2.2. Adsorption/ion-exchange ............................................................................... 10 2...

  3. Radiation dose in mass screening for gastric cancer with high-concentration barium sulfate compared with moderate-concentration barium sulfate.

    Science.gov (United States)

    Yamamoto, K; Azuma, M; Kuroda, C; Kubo, T; Yabunaka, K; Yamazaki, H; Katsuda, T; Takeda, Y

    2009-06-01

    Recently, high-concentration barium sulfate has been developed and is used in many medical facilities. This study compared radiation dose using high-concentration and moderate-concentration barium sulfate. The dose was evaluated with an experimental method using a gastric phantom and with a clinical examination. In the former, the dose and X-ray tube load were measured on the phantom with two concentrations of barium sulfate. In the latter, the fluoroscopic dose-area product (DAP), the radiographic DAP and their sum, the total DAP, were investigated in 150 subjects (112 males, 38 females) treated with both concentrations of barium sulfate. The effective dose was calculated by the software of PCXMC in every case. The results of the experimental evaluation indicated that the effective dose and X-ray tube load were greater with high-concentration barium sulfate than with moderate-concentration barium sulfate (p barium sulfate than with high-concentration barium sulfate (p barium sulfate. We conclude that high-concentration barium sulfate does not increase radiation dose in mass screening for gastric cancer.

  4. Theoretical considerations on the indirect determination of anions : Determination of sulphate with barium chloranilate

    NARCIS (Netherlands)

    Agterdenbos, J.; Martinius, N.

    Some anions (sulphate) may be determined by their reaction with a slightly dissociated or slightly soluble compound (barium chloranilate), another anion (chloranilate ion) being liberated and its extinction measured. An equation is given in this paper for the relationship between the concentration

  5. A novel barium polymeric membrane sensor for selective determination of barium and sulphate ions based on the complex ion associate barium(II)-Rose Bengal as neutral ionophore

    Energy Technology Data Exchange (ETDEWEB)

    Othman, A.M. [Genetic Engineering and Biotechnology Research Institute (GEBRI), Minufiya University, Sadat City (Egypt); El-Shahawi, M.S. [Chemistry Department, Faculty of Science at Damiatta, Mansoura University, Damiatta, Dumyat 34517 (Egypt)]. E-mail: mohammad_el_shahawi@yahoo.co.uk; Abdel-Azeem, M. [Chemistry Department, Faculty of Science at Damiatta, Mansoura University, Damiatta, Dumyat 34517 (Egypt)

    2006-01-12

    A simple, long life, rapid response and sensitive barium(II)-PVC membrane sensor that typically follows Nernstian behavior has been developed for the assay of barium(II) ions. The developed sensor has been made by incorporating the complex ion associate of barium(II)-Rose Bengal (Ba-RB) as an ionophore into a plasticized PVC matrix. The sensor is stable and exhibited fast potential response of 20 s and gave a good linear response with a Nernstian slope of 28.5 {+-} 0.4 mV/decade of activity within the concentration range 5 x 10{sup -5} to 10{sup -1} M over a wide range of pH 4.5-10.0 for barium(II) ions. The developed sensor showed comparatively good selectivity for barium(II) ions with respect to other alkali, alkaline earth, transition and heavy metal ions. The plasticizer o-nitrophenyloctyl ether controlled significantly the calibration slope and the lifetime of the fabricated sensor. The proposed sensor was used successfully for the analysis of barium(II) ions in wastewater samples and in lithophone pigment with excellent recovery percentages in the range 98.9-99.8 {+-} 1.6%. The determination of sulphate in fresh and potable water samples with the developed sensor has been also achieved successfully. The described sensor provides a reliable means with good correlation with the data obtained by atomic absorption spectrometry (AAS) and other spectrophotometric methods for the analysis of trace amounts of barium(II) and/or sulphate ions in different matrices.

  6. Short communication Sulphate measurement in organic-rich ...

    African Journals Online (AJOL)

    Sulphate measurement using a barium sulphate turbidimetric method in solutions with high concentrations of organic material is shown to be problematic. The organics give background colour, which introduces a positive error to the measured absorption, and inhibit the barium sulphate precipitate, which results in a ...

  7. Citric Acid Addition to Controlling Crystallization of Barium Sulphate (BaSO4) in Pipes through Ba2+ Concentration Variation in the Solution

    Science.gov (United States)

    Ivanto, G.; Fatra, F.; Dera, N. S.; Muryanto, S.; Bayuseno, A. P.

    2017-05-01

    The scale of barium sulphate (BaSO4) is common scale for mineral deposit that found in the offshore oil and gas exploitation. This scale is related with precipitation and grown of mineral deposit on the pipelines surface. Therefore, it results in blockage at the pipe. This paper presents the experimental scaling of barium sulphate in the laminar flow. The barium sulphate solution was prepared by mixing an equimolar solution of barium chloride (BaCl2) and sodium sulphate (Na2SO4). The flow rate is 40 ml/min at temperature of 50 °C. The solutions added by citric acid (C6H8O7) with variation concentration of 0 ppm, 5 ppm, and 10 ppm. The crystallization of barium sulphate was measured by using the conductivity meters. The barite crytals were dried and characterized by using SEM/EDX and XRD. The SEM Results show that the morphology of Barite scale was change in the presence of citric acid. The mineral of barium sulphate was pure barite based on the XRD phase analysis. The presence of citric acid clearly inhibit the crystallization of barium sulphate.

  8. Obtaining Highly Crystalline Barium Sulphate Nanoparticles via Chemical Precipitation and Quenching in Absence of Polymer Stabilizers

    Directory of Open Access Journals (Sweden)

    Ángela B. Sifontes

    2015-01-01

    Full Text Available Here we report the synthesis of barium sulphate (BaSO4 nanoparticles from Ba(OH2/BaCl2 solutions by a combined method of precipitation and quenching in absence of polymer stabilizers. Transmission electron microscopy (HRTEM, Fourier transforms infrared spectroscopy (FTIR, and X-ray diffraction (XRD were employed to characterize the particles. The Scherrer formula was applied to estimate the particle size using the width of the diffraction peaks. The obtained results indicate that the synthesized material is mainly composed of nanocrystalline barite, with nearly spherical morphology, and diameters ranging from 4 to 92 nm. The lattice images of nanoparticles were clearly observed by HRTEM, indicating a high degree of crystallinity and phase purity. In addition, agglomerates with diameters between 20 and 300 nm were observed in both lattice images and dynamic light scattering measurements. The latter allowed obtaining the particle size distribution, the evolution of the aggregate size in time of BaSO4 in aqueous solutions, and the sedimentation rate of these solutions from turbidimetry measurements. A short discussion on the possible medical applications is presented.

  9. Phase Analysis and Crystal Morphology of Barium Sulphate Precipitated from The Laminar Flowing Water

    Science.gov (United States)

    Dera, N. S.; Fatra, F.; Ivanto, G.; Muryanto, S.; Bayuseno, A. P.

    2017-05-01

    Barium sulphate (BaSO4) is common scale deposits precipitated in pipes which can hinder the flow rate and lower heat transfer efficiency. Therefore, there is a need to address the understanding of scale formation in pipes. In this paper, the formation of BaSO4 scale in the laminar flowing water was investigated in the laboratory rig of scale formation. The scale forming solution was prepared by BaCl2 and Na2SO4 with Ba2+ concentrations in equimolar ppm of 2500, 3000, and 3500. The pH solution was set up in the values of 6, 8, and 10. The crystals were deposited on the four coupons pipes made of copper inside the pipes. The scale deposited from the flowing water was then characterized by using SEM equipped by EDX for crystal morphology and elemental analysis. XRD method was used for the crystalline phase analysis. The results showed that BaSO4 crystals with star-like morphology can be observed from SEM imaging. The pure crystal barite can be obtained from the experiments as can be confirmed by XRD analysis. It is obvious that the barite crystals can be easily formed in the basic solution.

  10. Treatment of a highly-concentrated sulphate-rich synthetic wastewater using calcium hydroxide in a fluidised bed crystallizer.

    Science.gov (United States)

    Maharaj, Chiara; Chivavava, Jemitias; Lewis, Alison

    2018-02-01

    This study aimed to investigate factors that affect the conversion of sulphates and magnesium, and the recovery of gypsum and magnesium hydroxide in the neutralization of a sulphate rich stream using calcium hydroxide, in a laboratory scale seeded fluidised bed crystallizer. Particular focus was on reducing the precipitated fines that escaped with the treated water, through the use of seeds, while removing as much sulphate-compounds from the waste stream as possible. The composition of the total sulphate salts was as follows: 80% magnesium sulphate, calcium sulphate remaining at its saturation concentration (1.5 g/L), with the remainder being sodium sulphate based on typical reverse osmosis retentate concentrations ranging from 1.5 - 120 g/L of total sulphate salts. The fluidised bed crystallizer, using silica seeds, was found to be effective at reducing the formation of gypsum and magnesium hydroxide fines by almost half. Feed concentrations of 35 g/L of total salts yielded better sulphate conversions (±75%), compared to a feed concentration of 8 g/L (±30%). It was possible to remove 99% of the magnesium in the saline wastewater stream using a calcium to sulphate ratio of 1:1 for feed concentrations of 15 g/L and higher. Excess calcium hydroxide suspension improved sulphate conversions. Copyright © 2017 Elsevier Ltd. All rights reserved.

  11. Complete sulphate removal from neutralised acidic mine drainage with barium carbonate

    CSIR Research Space (South Africa)

    Swanepoel, H

    2012-03-01

    Full Text Available sulphate removal is achieved. However, further treatment is required in order to reduce the sulphate concentration to below 500 mg/l, which is the required concentration for discharge into waterways. The CSIR developed and patented the ABC (alkali...

  12. High concentrations of lead and barium in hair of the rural population caused by water pollution in the Thar Jath oilfields in South Sudan.

    Science.gov (United States)

    Pragst, Fritz; Stieglitz, Klaus; Runge, Hella; Runow, Klaus-Dietrich; Quig, David; Osborne, Robert; Runge, Christian; Ariki, John

    2017-05-01

    In the oil fields of Thar Jath, South Sudan, increasing salinity of drinking water was observed together with human incompatibilities and rise in livestock mortalities. Hair analysis was used to characterize the toxic exposure of the population. Hair samples of volunteers from four communities with different distance from the center of the oil field (Koch 23km, n=24; Leer 50km, n=26; Nyal 110km, n=21; and Rumbek 220km, n=25) were analyzed for altogether 39 elements by inductively coupled plasma-mass spectrometry. Very high concentrations and a toxic health endangerment were assessed for lead and barium. The concentration of lead increased steadily with decreasing distance from the oil field from Rumbek (mean 2.8μg/g) to Koch (mean 18.7μg/g) and was there in the same range as in highly contaminated mining regions in Kosovo, China or Bolivia. The weighting materials in drilling muds barite (BaSO4) and galena (PbS) were considered to be the sources of drinking water pollution and high hair values. The high concentrations of lead and barium in hair demonstrate clearly the health risk caused by harmful deposition of toxic industrial waste but cannot be used for diagnosis of a chronic intoxication of the individuals. Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  13. Sulphate removal over barium-modified blast-furnace-slag geopolymer.

    Science.gov (United States)

    Runtti, Hanna; Luukkonen, Tero; Niskanen, Mikko; Tuomikoski, Sari; Kangas, Teija; Tynjälä, Pekka; Tolonen, Emma-Tuulia; Sarkkinen, Minna; Kemppainen, Kimmo; Rämö, Jaakko; Lassi, Ulla

    2016-11-05

    Blast-furnace slag and metakaolin were geopolymerised, modified with barium or treated with a combination of these methods in order to obtain an efficient SO4(2-) sorbent for mine water treatment. Of prepared materials, barium-modified blast-furnace slag geopolymer (Ba-BFS-GP) exhibited the highest SO4(2-) maximum sorption capacity (up to 119mgg(-1)) and it compared also favourably to materials reported in the literature. Therefore, Ba-BFS-GP was selected for further studies and the factors affecting to the sorption efficiency were assessed. Several isotherms were applied to describe the experimental results of Ba-BFS-GP and the Sips model showed the best fit. Kinetic studies showed that the sorption process follows the pseudo-second-order kinetics. In the dynamic removal experiments with columns, total SO4(2-) removal was observed initially when treating mine effluent. The novel modification method of geopolymer material proved to be technically suitable in achieving extremely low concentrations of SO4(2-) (<2mgL(-1)) in mine effluents. Copyright © 2016 Elsevier B.V. All rights reserved.

  14. Removal of high concentration of sulfate from pigment industry effluent by chemical precipitation using barium chloride: RSM and ANN modeling approach.

    Science.gov (United States)

    Navamani Kartic, D; Aditya Narayana, B Ch; Arivazhagan, M

    2018-01-15

    Sulfate ions pose a major threat and challenge in the treatment of industrial effluents. The sample of wastewater obtained from a pigment industry contained large quantities of sulfate in the form of sodium sulfate which resulted in high TDS. As the removal of sulfate from pigment industry effluent was not reported previously, this work was focused on removing the sulfate ions from the effluent by chemical precipitation using barium chloride. The efficiency of sulfate removal was nearly 100% at an excess dosage of barium chloride, which precipitates the dissolved sulfate ions in the form of barium sulfate. Optimization of the parameters was done using Response Surface Methodology (RSM). This work is the first attempt for modeling the removal of sulfate from pigment industry effluent using RSM and Artificial Neural Network (ANN). Prediction by both the models was evaluated and both of them exhibited good performance (R2 value > 0.99). It was observed that the prediction by RSM (R2 value 0.9986) was closer to the experimental results than ANN prediction (R2 value 0.9955). The influence on the pH and conductivity of the solution by dosage of precipitant was also studied. The formation of barium sulfate was confirmed by characterization of the precipitate. Therefore, the sulfate removed from the effluent was converted into a commercially valuable precipitate. Copyright © 2017 Elsevier Ltd. All rights reserved.

  15. Barium enema

    Science.gov (United States)

    ... series; Colorectal cancer - lower GI series; Colorectal cancer - barium enema; Crohn disease - lower GI series; Crohn disease - barium enema; Intestinal blockage - lower GI series; Intestinal blockage - ...

  16. Application of magnesium hydroxide and barium hydroxide for the ...

    African Journals Online (AJOL)

    Application of magnesium hydroxide and barium hydroxide for the removal of metals and sulphate from mine water. ... equivalent to the Ba(OH)2 dosage. During CO2-dosing, CaCO3 is precipitated to the saturation level of CaCO3. Keywords: Magnesium hydroxide; barium hydroxide; sulphate removal; water treatment ...

  17. Study on the preparation and formation mechanism of barium ...

    Indian Academy of Sciences (India)

    This paper reports a simple method to prepare barium sulphate nanoparticles by use of tetradecanoic acid, hexadecanoic acid and stearic acid as modifier. The barium sulphate nanoparticles obtained are characterized by using Fourier transform infra-red spectroscopy (FT-IR), powder X-ray diffraction (XRD), transmission ...

  18. Barium Sulfate

    Science.gov (United States)

    ... uses a computer to put together x-ray images to create cross-sectional or three dimensional pictures of the inside of the body). Barium sulfate is in a class of medications called radiopaque contrast media. It works by coating the esophagus, stomach, or ...

  19. Barite (Barium)

    Science.gov (United States)

    Johnson, Craig A.; Piatak, Nadine M.; Miller, M. Michael; Schulz, Klaus J.; DeYoung, John H.; Seal, Robert R.; Bradley, Dwight C.

    2017-12-19

    Barite (barium sulfate, BaSO4) is vital to the oil and gas industry because it is a key constituent of the mud used to drill oil and gas wells. Elemental barium is an additive in optical glass, ceramic glazes, and other products. Within the United States, barite is produced mainly from mines in Nevada. Imports in 2011 (the latest year for which complete data were available) accounted for 78 percent of domestic consumption and came mostly from China.Barite deposits can be divided into the following four main types: bedded-sedimentary; bedded-volcanic; vein, cavity-fill, and metasomatic; and residual. Bedded-sedimentary deposits, which are found in sedimentary rocks with characteristics of high biological productivity during sediment accumulation, are the major sources of barite production and account for the majority of reserves, both in the United States and worldwide. In 2013, China and India were the leading producers of barite, and they have large identified resources that position them to be significant producers for the foreseeable future. The potential for undiscovered barite resources in the United States and in many other countries is considerable, however. The expected tight supply and rising costs in the coming years will likely be met by increased production from such countries as Kazakhstan, Mexico, Morocco, and Vietnam.Barium has limited mobility in the environment and exposed barium in the vicinity of barite mines poses minimal risk to human or ecosystem health. Of greater concern is the potential for acidic metal-bearing drainage at sites where the barite ores or waste rocks contain abundant sulfide minerals. This risk is lessened naturally if the host rocks at the site are acid-neutralizing, and the risk can also be lessened by engineering measures.

  20. INFLUENCE OF BARIUM OXIDE ADDITIONS ON PORTLAND CLINKER

    Directory of Open Access Journals (Sweden)

    Anezka Zezulova

    2016-12-01

    Full Text Available Nowadays, nuclear power plants are widespread around the world and research is of great interest. Together with nuclear research, shielding of different types of radiation is an important current topic of research aiming at their safety. Portland cement has been an elementary building material for centuries. Since barium is very efficient in shielding different types of radiation, it can be assumed that the radiation shielding capability of cement can be improved by incorporation of barium. This work deals with the influence of barium oxide, added in the form of barium carbonate and sulphate, on the formation and properties of Portland clinker. The structure of burnt clinkers and the ratio of clinker phases were studied by polarizing microscopy and by X-ray diffraction. With increasing barium content, the alite-belite ratio decreases and the content of free lime gradually increases. Moreover, sulphates induce the growth of alite crystals. The ability of barium to be a part of the clinker minerals was observed by scanning electron microscopy. Belite and clinker melt contain the highest amount of barium, but aggregates of barium oxide are formed in the clinker melt. Furthermore, the rate of alite crystallization was studied under isothermal conditions.

  1. BARIUM RECOVERY PROCESS

    Science.gov (United States)

    Blanco, R.E.

    1959-07-21

    A method of separating barium from nuclear fission products is described. In accordance with the invention, barium may be recovered from an acidic solution of neutron-irradiated fissionable material by carrying ihe barium cut of solution as a sulfate with lead as a carrier and then dissolving the barium-containing precipitate in an aqueous solution of an aliphatic diamine chelating reagent. The barium values together with certain other metallic values present in the diamine solution are then absorbed onto a cation exchange resin and the barium is selectively eluted from the resin bed with concentrated nitric acid.

  2. Barium enema (image)

    Science.gov (United States)

    A barium enema is performed to examine the walls of the colon. During the procedure, a well lubricated enema tube is inserted gently into the rectum. The barium, a radiopaque (shows up on X-ray) contrast ...

  3. Barium Appendicitis 1 Month After a Barium Meal

    OpenAIRE

    Urade, Masaaki; Shinbo, Toshihumi

    2012-01-01

    Because barium sulfate (BaSO4) is not harmful to the mucosa, it is widely used for gastrointestinal imaging. Barium appendicitis is a very rare complication of barium meals and barium enema. We report a case of acute appendicitis associated with retained appendiceal barium. A 47-year-old man presented with right lower abdominal pain after upper gastrointestinal imaging was performed using barium 1 month earlier. The abdominal plain roentgenogram showed an area of retained barium in the right ...

  4. Barium appendicitis 1 month after a barium meal.

    Science.gov (United States)

    Urade, Masaaki; Shinbo, Toshihumi

    2012-01-01

    Because barium sulfate (BaSO(4)) is not harmful to the mucosa, it is widely used for gastrointestinal imaging. Barium appendicitis is a very rare complication of barium meals and barium enema. We report a case of acute appendicitis associated with retained appendiceal barium. A 47-year-old man presented with right lower abdominal pain after upper gastrointestinal imaging was performed using barium 1 month earlier. The abdominal plain roentgenogram showed an area of retained barium in the right lower quadrant. Multiplanar reconstruction of computed tomography scans showed barium retention in the appendix. Emergency appendectomy was performed. A cross section of the specimen revealed the barium mass. Barium-associated appendicitis is a very rare clinical entity but we should be cautious of this uncommon disease when we encounter barium deposits in the appendix after barium examination. This report is significant because barium was identified both macroscopically and microscopically.

  5. Sulphate in Pregnancy

    Directory of Open Access Journals (Sweden)

    Paul A. Dawson

    2015-03-01

    Full Text Available Sulphate is an obligate nutrient for healthy growth and development. Sulphate conjugation (sulphonation of proteoglycans maintains the structure and function of tissues. Sulphonation also regulates the bioactivity of steroids, thyroid hormone, bile acids, catecholamines and cholecystokinin, and detoxifies certain xenobiotics and pharmacological drugs. In adults and children, sulphate is obtained from the diet and from the intracellular metabolism of sulphur-containing amino acids. Dietary sulphate intake can vary greatly and is dependent on the type of food consumed and source of drinking water. Once ingested, sulphate is absorbed into circulation where its level is maintained at approximately 300 μmol/L, making sulphate the fourth most abundant anion in plasma. In pregnant women, circulating sulphate concentrations increase by twofold with levels peaking in late gestation. This increased sulphataemia, which is mediated by up-regulation of sulphate reabsorption in the maternal kidneys, provides a reservoir of sulphate to meet the gestational needs of the developing foetus. The foetus has negligible capacity to generate sulphate and thereby, is completely reliant on sulphate supply from the maternal circulation. Maternal hyposulphataemia leads to foetal sulphate deficiency and late gestational foetal death in mice. In humans, reduced sulphonation capacity has been linked to skeletal dysplasias, ranging from the mildest form, multiple epiphyseal dysplasia, to achondrogenesis Type IB, which results in severe skeletal underdevelopment and death in utero or shortly after birth. Despite being essential for numerous cellular and metabolic functions, the nutrient sulphate is largely unappreciated in clinical settings. This article will review the physiological roles and regulation of sulphate during pregnancy, with a particular focus on animal models of disturbed sulphate homeostasis and links to human pathophysiology.

  6. Binding and Leakage of Barium in Alginate Microbeads

    Science.gov (United States)

    Mørch, Yrr A.; Qi, Meirigeng; Gundersen, Per Ole M.; Formo, Kjetil; Lacik, Igor; Skjåk-Bræk, Gudmund; Oberholzer, Jose; Strand, Berit L.

    2013-01-01

    Microbeads of alginate cross-linked with Ca2+ and/or Ba2+ are popular matrices in cell-based therapy. The aim of this study was to quantify the binding of barium in alginate microbeads and its leakage under in vitro and accumulation under in vivo conditions. Low concentrations of barium (1 mM) in combination with calcium (50 mM) and high concentrations of barium (20 mM) in gelling solutions were used for preparation of microbeads made of high-G and high-M alginates. High-G microbeads accumulated barium from gelling solution and contained higher concentrations of divalent ions for both low- and high-Ba exposure compared to high-G microbeads exposed to calcium solely and to high-M microbeads for all gelling conditions. Although most of the unbound divalent ions were removed during the wash and culture steps, leakage of barium was still detected during storage. Barium accumulation in blood and femur bone of mice implanted with high-G beads was found to be dose-dependent. Estimated barium leakage relevant to transplantation to diabetic patients with islets in alginate microbeads showed that the leakage was 2.5 times lower than the tolerable intake value given by WHO for high-G microbeads made using low barium concentration. The similar estimate gave 1.5 times higher than is the tolerable intake value for the high-G microbeads made using high barium concentration. In order to reduce the risk of barium accumulation that may be of safety concern, the microbeads made of high-G alginate gelled with a combination of calcium and low concentration of barium ions is recommended for islet transplantation. PMID:22700168

  7. Barium periostitis: an intraoral complication following barium swallow.

    Science.gov (United States)

    Stanton, David C; Seeger, Douglas; Robinson, Brian T

    2007-05-01

    Barium is used with great frequency for various gastrointestinal radiographic studies. Complications arising from the use of barium are uncommon and can range from peritonitis, pneumonitis, vascular intravasation, allergic reactions, and even "barium appendicitis." We report a case of an unusual complication, periostitis, from the use of barium in a 46-year-old male.

  8. Chemical sulphate removal for treatment of construction and demolition debris leachate.

    Science.gov (United States)

    Kijjanapanich, Pimluck; Annachhatre, Ajit P; Esposito, Giovanni; Lens, Piet N L

    2014-08-01

    Construction and demolition debris (CDD) is a product of construction, renovation or demolition activities. It has a high gypsum content (52.4% of total gypsum), concentrated in the CDD sand (CDDS) fraction. To comply with the posed limit of the maximum amount of sulphate present in building sand, excess sulphate needs to be removed. In order to enable reuse of CDDS, a novel treatment process is developed based on washing of the CDDS to remove most of the gypsum, and subsequent sulphate removal from the sulphate-rich CDDS leachate. This study aims to assess chemical techniques, i.e. precipitation and adsorption, for sulphate removal from the CDDS leachate. Good sulphate removal efficiencies (up to 99.9%) from the CDDS leachate can be achieved by precipitation with barium chloride (BaCl2) and lead(II) nitrate (Pb(NO3)2). Precipitation with calcium chloride (CaCl2), calcium carbonate (CaCO3) and calcium oxide (CaO) gave less efficient sulphate removal. Adsorption of sulphate to aluminium oxide (Al2O3) yielded a 50% sulphate removal efficiency, whereas iron oxide-coated sand as adsorbent gave only poor (10%) sulphate removal efficiencies.

  9. Dissolution of Barium from Barite in Sewage Sludges and Cultures of Desulfovibrio desulfuricans

    OpenAIRE

    Baldi, F; Pepi, M; Burrini, D.; Kniewald, G.; Scali, D.; Lanciotti, E.

    1996-01-01

    High concentrations of total barium, ranging from 0.42 to 1.58 mg(middot)g(sup-1) (dry weight) were found in sludges of two sewage treatment plants near Florence, Italy. Barium concentrations in the suspended matter decreased as redox potential values changed from negative to positive. An anoxic sewage sludge sample was aerated, and 30% of the total barium was removed in 24 h. To demonstrate that barium was solubilized from barite by sulfate-reducing bacteria, a strain of Desulfovibrio desulf...

  10. Separate effects of urinary chondroitin sulphate and heparan sulphate on the crystallization of urinary calcium oxalate: differences between stone formers and normal control subjects.

    Science.gov (United States)

    Shum, D K; Gohel, M D

    1993-07-01

    1. Urinary glycosaminoglycans were recovered from the papain digest of polyanions precipitated sequentially by cetylpyridinium chloride and sodium acetate-saturated ethanol. Those from the early morning urine of 48 stone formers and 43 normal control subjects measured 11 and 16 micrograms of uronic acid/ml of urine, respectively. 2. Preparative agarose gel electrophoresis of the recovered glycosaminoglycans in barium acetate buffer (pH 5.8) yielded fractions containing purely chondroitin sulphate, co-polymeric chondroitin/dermatan sulphates and heparan sulphate. Identification was based on the susceptibility of the fractions to chondroitinase or nitrous acid treatment. Similar compositions of glycosaminoglycan classes were observed in samples from stone formers and normal control subjects. 3. The fractionated glycosaminoglycans were dissolved in urine ultrafiltrate to assay for nucleation-promoting and growth-inhibiting activities towards crystallization of urinary calcium oxalate. When compared at the same uronic acid concentration, both the urinary chondroitin sulphate isomers and heparan sulphates of stone formers demonstrated the capacity to enhance crystal nucleation from calcium oxalate endogenous in urine ultrafiltrates, whereas only urinary heparan sulphates of normal control subjects demonstrated this capacity. 4. Tissue-derived reference chondroitin sulphate, dermatan sulphate and heparin, when similarly tested, showed negligible crystal nucleation-promoting activity. The tissue-derived heparan sulphate was similar to the urinary heparan sulphates in showing marked crystal nucleation-promoting activity. 5. Crystal-growth inhibitory activity was evident in all urinary glycosaminoglycan fractions studied. In particular, urinary heparan sulphate of normal control subjects showed higher activity than that of stone formers or the chondroitin sulphate isomers of both stone formers and normal control subjects (P < 0.005).

  11. Effect of high levels of dietary molybdenum and sulphate on SA ...

    African Journals Online (AJOL)

    1988-10-29

    Oct 29, 1988 ... Effect of high levels of dietary molybdenum and sulphate on SA Mutton Merino sheep. I. Minerai status and ... reliable diagnostic index of copper deficiency in sheep in the presence of high concentrations of molybdenum and sulphate in ..... dates are poorly excreted by both the urinary and faecal routes in ...

  12. Integrated treatment of acid mine drainage using cryptocrystalline magnesite and barium chloride

    CSIR Research Space (South Africa)

    Masindi, Vhahangwele

    2017-08-01

    Full Text Available This study endeavours to report the efficiency of a hybrid approach in the treatment of acid mine drainage. Cryptocrystalline magnesite was used to pre-treat acid mine drainage and barium chloride was used to remove the residual sulphate through...

  13. Modeling and minimization of barium sulfate scale

    Science.gov (United States)

    Alan W. Rudie; Peter W. Hart

    2006-01-01

    The majority of the barium present in the pulping process exits the digester as barium carbonate. Barium carbonate dissolves in the bleach plant when the pH drops below 7 and, if barium and sulfate concentrations are too high, begins to precipitate as barium sulfate. Barium is difficult to control because a mill cannot avoid this carbonate-to-sulfate transition using...

  14. Sulphate in Liquid Nuclear Waste: from Production to Containment

    Energy Technology Data Exchange (ETDEWEB)

    Lenoir, M.; Grandjean, A.; Ledieu, A.; Dussossoy, J.L.; Cau Dit Coumes, C.; Barre, Y.; Tronche, E. [CEA Marcoule, DEN/DTCD/SECM/LDMC, Batiment 208 BP17171, Bagnols sur Ceze, 30207 (France)

    2009-06-15

    Nuclear industry produces a wide range of low and intermediate level liquid radioactive wastes which can include different radionuclides such as {sup 90}Sr. In La Hague reprocessing plant and in the nuclear research centers of CEA (Commissariat a l'Energie Atomique), the coprecipitation of strontium with barium sulphate is the technique used to treat selectively these contaminated streams with the best efficiency. After the decontamination process, low and intermediate level activity wastes incorporating significant quantities of sulphate are obtained. The challenge is to find a matrix easy to form and with a good chemical durability which is able to confine this kind of nuclear waste. The current process used to contain sulphate-rich nuclear wastes is bituminization. However, in order to improve properties of containment matrices and simplify the process, CEA has chosen to supervise researches on other materials such as cements or glasses. Indeed, cements are widely used for the immobilization of a variety of wastes (low and intermediate level wastes) and they may be an alternative matrix to bitumen. Even if Portland cement, which is extensively used in the nuclear industry, presents some disadvantages for the containment of sulphate-rich nuclear wastes (risk of swelling and cracking due to delayed ettringite formation), other cement systems, such as calcium sulfo-aluminate binders, may be valuable candidates. Another matrix to confine sulphate-rich waste could be the glass. One of the advantages of this material is that it could also immobilize sulphate containing high level nuclear waste which is present in some countries. This waste comes from the use of ferrous sulfamate as a reducing agent for the conversion of Pu{sup 4+} to Pu{sup 3+} in the partitioning stage of the actinides during reprocessing. Sulphate solubility in borosilicate glasses has already been studied in CEA at laboratory and pilot scales. At a pilot scale, low level liquid waste has been

  15. Observed Barium Emission Rates

    Science.gov (United States)

    Stenbaek-Nielsen, H. C.; Wescott, E. M.; Hallinan, T. J.

    1993-01-01

    The barium releases from the CRRES satellite have provided an opportunity for verifying theoretically calculated barium ion and neutral emission rates. Spectra of the five Caribbean releases in the summer of 1991 were taken with a spectrograph on board a U.S. Air Force jet aircraft. Because the line of sight release densities are not known, only relative rates could be obtained. The observed relative rates agree well with the theoretically calculated rates and, together with other observations, confirm the earlier detailed theoretical emission rates. The calculated emission rates can thus with good accuracy be used with photometric observations. It has been postulated that charge exchange between neutral barium and oxygen ions represents a significant source for ionization. If so. it should be associated with emissions at 4957.15 A and 5013.00 A, but these emissions were not detected.

  16. Sources and impact of sulphate on groundwaters of Triassic carbonate aquifers, Upper Silesia, Poland

    Science.gov (United States)

    Samborska, Katarzyna; Halas, Stanislaw; Bottrell, Simon H.

    2013-04-01

    SummaryGroundwater within the unconfined or semi-confined parts of Triassic carbonate aquifers in Upper Silesia (Poland) contains high concentrations of sulphate (up to 290 mg/L), sometimes in excess of drinking water limits (>250 mg/L). To assess the influence of different possible sulphate sources, isotopic analyses of S and O were performed on groundwater sulphate and potential sulphate sources and combined with literature data. Three dominant sources of sulphate were delineated, based on the geological and literature study and supported by the mixing relations between inverse concentration of sulphate and its isotopic compositions. These sources are: (i) sulphate from rainfall; (ii) weathering of sulphide minerals in ore deposits in the aquifer-forming carbonate rocks; (iii) dissolution of sulphate evaporites in the Triassic sequence. Fortunately these three sources have distinctive S and O isotope compositions and thus their contributions to the total dissolved sulphate could be estimated. The application of linear mixing models for three sources in the dual isotope system allowed the impact of the three different sulphate sources on particular parts of the aquifers to be calculated. The average isotopic composition of sulphate in abstracted groundwater indicates that the most important source of sulphate is sulphide weathering, contributing about 50% of total sulphate. The second most significant source of sulphate input is rainfall and it is characterised by a mean contribution of 30%. Application of Monte Carlo analysis that incorporates the full variability in distributions of isotopic compositions for the three sources and all mixing fractions between them gave the most probable ranges of the dissolved in groundwater sulphate. This analysis indicated that the proportion of sulphate derived by sulphide oxidation is comparable with the estimations based on linear models. This study has shown that the water quality of these important groundwater resources is

  17. Silicosis in barium miners.

    Science.gov (United States)

    Seaton, A; Ruckley, V A; Addison, J; Brown, W R

    1986-01-01

    Four men who mined barytes in Scotland and who developed pneumoconiosis are described. Three developed progressive massive fibrosis, from which two died; and one developed a nodular simple pneumoconiosis after leaving the industry. The radiological and pathological features of the men's lungs were those of silicosis and high proportions of quartz were found in two of them post mortem. The quartz was inhaled from rocks associated with the barytes in the mines. The features of silicosis in barium miners are contrasted with the benign pneumoconiosis, baritosis, that occurs in workers exposed to crushed and ground insoluble barium salts. Diagnostic difficulties arise when silicosis develops in workers mining minerals known to cause a separate and benign pneumoconiosis. These difficulties are compounded when, as not infrequently happens, the silicotic lesions develop or progress after exposure to quartz has ceased. Images PMID:3787542

  18. A barium(II)

    Indian Academy of Sciences (India)

    WINTEC

    [(pentaaqua)(4-nitrobenzoato-O,O′)barium(II)] units are linked into an infinite one-dimensional chain along b-axis with the aid of the ... long Ba⋅⋅⋅Ba distance of 6⋅750(1) Å is observed between adjacent Ba(II) ions in the chain and the oxygen atoms of the ... The colour- less crystalline blocks that separated were filtered,.

  19. Barium peritonitis in small animals.

    Science.gov (United States)

    Ko, Jae Jin; Mann, F A Tony

    2014-05-01

    Barium peritonitis is extremely rare, but is difficult to treat and may be life-threatening. Barium suspension leakage from the gastrointestinal tract into the abdominal cavity has a time-dependent and synergistically deleterious effect in patients who have generalized bacterial peritonitis. The severity of barium peritonitis is dependent on the quantity of barium in the abdominal cavity. Barium sulfate leakage results in hypovolemia and hypoproteinemia by worsening the exudation of extracellular fluid and albumin. Abdominal fluid analysis is a useful and efficient method to diagnose barium peritonitis. Serial radiographs may not be a reliable or timely diagnostic technique. Initial aggressive fluid resuscitation and empirical broad-spectrum antibiotic treatment should be instituted promptly, followed quickly by celiotomy. During exploratory surgical intervention, copious irrigation and direct wiping with gauze are employed to remove as much barium as possible. Omentectomy should be considered when needed to expedite barium removal. Despite aggressive medical and surgical treatments, postoperative prognosis is guarded to poor due to complications, such as acute vascular shock, sepsis, diffuse peritonitis, hypoproteninemia, electrolyte imbalance, cardiac arrest, small bowel obstruction related to progression of granulomas and adhesions in the abdominal cavity. Therefore, intensive postoperative monitoring and prompt intervention are necessary to maximize chances for a positive outcome. For those that do survive, small bowel obstruction is a potential consequence due to progression of abdominal adhesions.

  20. On barium oxide solubility in barium-containing chloride melts

    Energy Technology Data Exchange (ETDEWEB)

    Nikolaeva, Elena V.; Zakiryanova, Irina D.; Bovet, Andrey L.; Korzun, Iraida V. [Ural Federal Univ., Yekaterinburg (Russian Federation). Inst. of High Temperature Electrochemistry

    2016-11-01

    Oxide solubility in chloride melts depends on temperature and composition of molten solvent. The solubility of barium oxide in the solvents with barium chloride content is essentially higher than that in molten alkali chlorides. Spectral data demonstrate the existence of oxychloride ionic groupings in such melts. This work presents the results of the BaO solubility in two molten BaCl{sub 2}-NaCl systems with different barium chloride content. The received data together with earlier published results revealed the main regularities of BaO solubility in molten BaO-BaCl{sub 2}-MCl systems.

  1. Barium light source method and apparatus

    Science.gov (United States)

    Curry, John J. (Inventor); MacDonagh-Dumler, Jeffrey (Inventor); Anderson, Heidi M. (Inventor); Lawler, James E. (Inventor)

    2002-01-01

    Visible light emission is obtained from a plasma containing elemental barium including neutral barium atoms and barium ion species. Neutral barium provides a strong green light emission in the center of the visible spectrum with a highly efficient conversion of electrical energy into visible light. By the selective excitation of barium ionic species, emission of visible light at longer and shorter wavelengths can be obtained simultaneously with the green emission from neutral barium, effectively providing light that is visually perceived as white. A discharge vessel contains the elemental barium and a buffer gas fill therein, and a discharge inducer is utilized to induce a desired discharge temperature and barium vapor pressure therein to produce from the barium vapor a visible light emission. The discharge can be induced utilizing a glow discharge between electrodes in the discharge vessel as well as by inductively or capacitively coupling RF energy into the plasma within the discharge vessel.

  2. Spectroscopic (multi-energy) CT distinguishes iodine and barium contrast material in MICE

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, N.G. [University of Otago, Department of Radiology, Christchurch (New Zealand); Butler, A.P. [University of Otago, Department of Radiology, Christchurch (New Zealand); University of Canterbury, Physics and Astronomy, Christchurch (New Zealand); Scott, N.J.A. [University of Otago, Department of Medicine, Christchurch (New Zealand); Cook, N.J. [Christchurch Hospital, Medical Physics and Bioengineering, Christchurch (New Zealand); Butzer, J.S. [Karlsruhe Institute of Technology, Physics Department, Karlsruhe (Germany); Schleich, N. [University of Canterbury, Physics and Astronomy, Christchurch (New Zealand); Christchurch Hospital, Medical Physics and Bioengineering, Christchurch (New Zealand); Firsching, M. [Friedrich Alexander University, Physics Department, Erlangen (Germany); Grasset, R.; Ruiter, N. de [University of Canterbury, Hitlab NZ, Christchurch (New Zealand); Campbell, M. [European Organisation for Nuclear Research, Physics Section, Geneva (Switzerland); Butler, P.H. [University of Canterbury, Physics and Astronomy, Christchurch (New Zealand)

    2010-09-15

    Spectral CT differs from dual-energy CT by using a conventional X-ray tube and a photon-counting detector. We wished to produce 3D spectroscopic images of mice that distinguished calcium, iodine and barium. We developed a desktop spectral CT, dubbed MARS, based around the Medipix2 photon-counting energy-discriminating detector. The single conventional X-ray tube operated at constant voltage (75 kVp) and constant current (150 {mu}A). We anaesthetised with ketamine six black mice (C57BL/6). We introduced iodinated contrast material and barium sulphate into the vascular system, alimentary tract and respiratory tract as we euthanised them. The mice were preserved in resin and imaged at four detector energy levels from 12 keV to 42 keV to include the K-edges of iodine (33.0 keV) and barium (37.4 keV). Principal component analysis was applied to reconstructed images to identify components with independent energy response, then displayed in 2D and 3D. Iodinated and barium contrast material was spectrally distinct from soft tissue and bone in all six mice. Calcium, iodine and barium were displayed as separate channels on 3D colour images at <55 {mu}m isotropic voxels. Spectral CT distinguishes contrast agents with K-edges only 4 keV apart. Multi-contrast imaging and molecular CT are potential future applications. (orig.)

  3. Cellulase Inhibition by High Concentrations of Monosaccharides

    DEFF Research Database (Denmark)

    Hsieh, Chia-Wen; Cannella, David; Jørgensen, Henning

    2014-01-01

    that low free water availability contributes to cellulase inhibition. Of the hydrolytic enzymes involved, those acting on the cellulose substrate, that is, exo- and endoglucanases, were the most inhibited. The β -glucosidases were shown to be less sensitive to high monosaccharide concentrations except......Biological degradation of biomass on an industrial scale culminates in high concentrations of end products. It is known that the accumulation of glucose and cellobiose, end products of hydrolysis, inhibit cellulases and decrease glucose yields. Aside from these end products, however, other...

  4. Spectrophotometric flow-injection determination of sulphate in soil solutions.

    Science.gov (United States)

    Meneses, Silvia R P; Maniasso, Nelson; Zagatto, Elias A G

    2005-03-15

    A flow-injection procedure for spectrophotometric determination of sulphate in soil solutions is proposed. Samples are directly soaked from the soils under field conditions, in-line filtered through ceramic plates, and preserved with thymol. The method involves reaction with barium dimethylsulphonazo(III) (DMSA) in the presence of dimethylsulphoxide (DMSO) with further measuring the decrease in absorbance at 668nm. A linear response is observed up to about 5mgl(-1) SO(4), and detection limit (3sigma criterion) is 0.1mgl(-1) SO(4). Only 4.5mug DMSA is consumed per determination. The system is rugged and baseline drift is not observed during extended operation periods. About 60 samples are injected per hour, and the results are precise (r.s.d. <2%) and in agreement with ion chromatography.

  5. Improved sulphate removal rates at increased sulphide concentration in the sulphidogenic bioreactor

    CSIR Research Space (South Africa)

    Greben, HA

    2005-07-01

    Full Text Available The product of the biological sulphate reduction is sulphide. High concentrations of molecular H2S(g) can be inhibitory for microbial activity, especially at a reactor pH of 6 to 7. This paper focuses on the effect of high sulphide concentrations...

  6. 75 FR 33824 - Barium Chloride From China

    Science.gov (United States)

    2010-06-15

    ... COMMISSION Barium Chloride From China Determination On the basis of the record\\1\\ developed in the subject... order on barium chloride from China would be likely to lead to continuation or recurrence of material... Barium Chloride from China: Investigation No. 731-TA-149 (Third Review). By order of the Commission...

  7. Spectroscopic (multi-energy) CT distinguishes iodine and barium contrast material in MICE

    CERN Document Server

    Anderson, NG; Firsching, M; de Ruiter, N; Schleich, N; Butzer, J S; Cook, N J; Grasset, R; Campbell, M; Scott, N J A; Anderson, N G

    2010-01-01

    Spectral CT differs from dual-energy CT by using a conventional X-ray tube and a photon-counting detector. We wished to produce 3D spectroscopic images of mice that distinguished calcium, iodine and barium. We developed a desktop spectral CT, dubbed MARS, based around the Medipix2 photon-counting energy-discriminating detector. The single conventional X-ray tube operated at constant voltage (75 kVp) and constant current (150 A mu A). We anaesthetised with ketamine six black mice (C57BL/6). We introduced iodinated contrast material and barium sulphate into the vascular system, alimentary tract and respiratory tract as we euthanised them. The mice were preserved in resin and imaged at four detector energy levels from 12 keV to 42 keV to include the K-edges of iodine (33.0 keV) and barium (37.4 keV). Principal component analysis was applied to reconstructed images to identify components with independent energy response, then displayed in 2D and 3D. Iodinated and barium contrast material was spectrally distinct f...

  8. Magnesium sulphate for fetal neuroprotection

    DEFF Research Database (Denmark)

    Bickford, Celeste D; Magee, Laura A; Mitton, Craig

    2013-01-01

    BACKGROUND: The aim of this study was to assess the cost-effectiveness of administering magnesium sulphate to patients in whom preterm birth at ... sensitivity analyses were used to compare the administration of magnesium sulphate with the alternative of no treatment. Two separate cost perspectives were utilized in this series of analyses: a health system and a societal perspective. In addition, two separate measures of effectiveness were utilized: cases...... of cerebral palsy (CP) averted and quality-adjusted life years (QALYs). RESULTS: From a health system and a societal perspective, respectively, a savings of $2,242 and $112,602 is obtained for each QALY gained and a savings of $30,942 and $1,554,198 is obtained for each case of CP averted when magnesium...

  9. The problem of the barium stars

    Science.gov (United States)

    Bohm-Vitense, E.; Nemec, J.; Proffitt, C.

    1984-01-01

    Ultraviolet observations of barium stars and other cool stars with peculiar element abundances are reported. Those observations attempted to find hot white dwarf companions. Among six real barium stars studied, only Zeta Cap was found to have a white dwarf companion. Among seven mild, or marginal, barium stars studied, at least three were found to have hot subluminous companions. It is likely that all of them have white dwarf companions.

  10. Biokinetics and effects of barium sulfate nanoparticles.

    Science.gov (United States)

    Konduru, Nagarjun; Keller, Jana; Ma-Hock, Lan; Gröters, Sibylle; Landsiedel, Robert; Donaghey, Thomas C; Brain, Joseph D; Wohlleben, Wendel; Molina, Ramon M

    2014-10-21

    Nanoparticulate barium sulfate has potential novel applications and wide use in the polymer and paint industries. A short-term inhalation study on barium sulfate nanoparticles (BaSO₄ NPs) was previously published [Part Fibre Toxicol 11:16, 2014]. We performed comprehensive biokinetic studies of ¹³¹BaSO₄ NPs administered via different routes and of acute and subchronic pulmonary responses to instilled or inhaled BaSO₄ in rats. We compared the tissue distribution of ¹³¹Ba over 28 days after intratracheal (IT) instillation, and over 7 days after gavage and intravenous (IV) injection of ¹³¹BaSO₄. Rats were exposed to 50 mg/m³ BaSO₄ aerosol for 4 or 13 weeks (6 h/day, 5 consecutive days/week), and then gross and histopathologic, blood and bronchoalveolar lavage (BAL) fluid analyses were performed. BAL fluid from instilled rats was also analyzed. Inhaled BaSO₄ NPs showed no toxicity after 4-week exposure, but a slight neutrophil increase in BAL after 13-week exposure was observed. Lung burden of inhaled BaSO₄ NPs after 4-week exposure (0.84 ± 0.18 mg/lung) decreased by 95% over 34 days. Instilled BaSO₄ NPs caused dose-dependent inflammatory responses in the lungs. Instilled BaSO₄ NPs (0.28 mg/lung) was cleared with a half-life of ≈ 9.6 days. Translocated ¹³¹Ba from the lungs was predominantly found in the bone (29%). Only 0.15% of gavaged dose was detected in all organs at 7 days. IV-injected ¹³¹BaSO₄ NPs were predominantly localized in the liver, spleen, lungs and bone at 2 hours, but redistributed from the liver to bone over time. Fecal excretion was the dominant elimination pathway for all three routes of exposure. Pulmonary exposure to instilled BaSO₄ NPs caused dose-dependent lung injury and inflammation. Four-week and 13-week inhalation exposures to a high concentration (50 mg/m³) of BaSO₄ NPs elicited minimal pulmonary response and no systemic effects. Instilled and inhaled BaSO₄ NPs were cleared quickly yet

  11. Thermodynamic analysis of dust sulphation reactions

    Energy Technology Data Exchange (ETDEWEB)

    Yang Yongxiang; Jokilaakso, A.

    1997-12-31

    Sulphation reactions of metal oxides with SO{sub 2} and O. or SO{sub 3} play significant roles in sulphation roasting of sulphide and oxide minerals as well as in desulphurisation process of combustion gases. In metallurgical waste-heat boilers for sulphide smelting, the sulphation of the oxidic flue dust in the atmosphere containing sulphur oxides is an unavoidable process, and the sulphation reactions have to be guided in a controlled way in the proper parts of the gas handling equipment. In this report, some thermodynamic analyses were conducted for the oxide sulphation reactions in relation to sulphide smelting processes. The phase stability of Me-S-O systems especially for oxides - sulphates equilibrium was studied under different thermodynamic conditions of gas compositions and temperatures. The sulphate stability was analysed for an example of gas compositions in the copper flash smelter of Outokumpu Harjavalta Metals Oy, in relation to temperature. In the report, most of the information was from literature. Moreover, a number of thermodynamic computations were carried out with the HSC program, and the constructed phase stability diagrams were compared with those from the literature whenever possible. The maximum temperatures for stable sulphates under normal operating conditions of the waste-heat boilers in sulphide smelting processes were obtained. This report will serve as the basis for the kinetic studies of the sulphation reactions and the sulphation reaction modelling in pyrometallurgical processes. (orig.) SULA 2 Programme. 36 refs.

  12. Barium aspiration and alveolarisation of barium in an infant: A case report and review of management

    Directory of Open Access Journals (Sweden)

    Alan F. Isles

    2014-05-01

    Full Text Available We describe a case of bilateral inhalation and alveolarisation of barium in an infant following a barium swallow for investigation of dusky spells associated with feeds. A bronchoscopy subsequently revealed the presence of a mid-tracheal tracheo-oesophageal cleft. We review the literature on barium aspiration, its consequences and make recommendations for management.

  13. Barium Depletion in Hollow Cathode Emitters

    Science.gov (United States)

    Polk, James E.; Capece, Angela M.; Mikellides, Ioannis G.; Katz, Ira

    2009-01-01

    The effect of tungsten erosion, transport and redeposition on the operation of dispenser hollow cathodes was investigated in detailed examinations of the discharge cathode inserts from an 8200 hour and a 30,352 hour ion engine wear test. Erosion and subsequent re-deposition of tungsten in the electron emission zone at the downstream end of the insert reduces the porosity of the tungsten matrix, preventing the ow of barium from the interior. This inhibits the interfacial reactions of the barium-calcium-aluminate impregnant with the tungsten in the pores. A numerical model of barium transport in the internal xenon discharge plasma shows that the barium required to reduce the work function in the emission zone can be supplied from upstream through the gas phase. Barium that flows out of the pores of the tungsten insert is rapidly ionized in the xenon discharge and pushed back to the emitter surface by the electric field and drag from the xenon ion flow. This barium ion flux is sufficient to maintain a barium surface coverage at the downstream end greater than 0.6, even if local barium production at that point is inhibited by tungsten deposits. The model also shows that the neutral barium pressure exceeds the equilibrium vapor pressure of the impregnant decomposition reaction over much of the insert length, so the reactions are suppressed. Only a small region upstream of the zone blocked by tungsten deposits is active and supplies the required barium. These results indicate that hollow cathode failure models based on barium depletion rates in vacuum dispenser cathodes are very conservative.

  14. Removal of sulphates from waste waters by sulphate-reducing bacteria

    Directory of Open Access Journals (Sweden)

    Luptáková Alena

    2002-03-01

    Full Text Available are present in almost all types of water, usually as a simple anion SO42-. The sulphates together with hydrogencarbonates and chlorides are principal anions in natural waters. In typical underground and surface waters, the concentration of sulphates is in the range from ten to hundreds milligrams per litre.Nowadays, the importance of the control of sulphate concentration in waste waters increases. According to the Slovak legislation the limit concentration of sulphates in surface and drinking waters is 250 mg.l-1 . In rivers the contents of sulphates increases mainly by the discharge of waste waters, which are coming mainly from chemical, textile, metallurgical, pharmaceutical, paper and mining industry. The concentration of sulphates in these waters is in the order of grams per litre.Many technologies for the sulphates removal from waste waters exist, including biologico-chemical processes. The principle of one of these methods is the reduction of sulphates by sulphate-reducing bacteria to hydrogen-sulphide.The objective of this work was to study the effect of initial sulphates concentration on the activity of anaerobic sulphate reducers as well as the kinetics of the anaerobic sulphate reduction. The batch reactor was used at temperature of 30°C and pH 7,5. Lactate was used as the carbon source.

  15. Laser cooling and trapping of barium

    NARCIS (Netherlands)

    De, Subhadeep

    2008-01-01

    Laser cooling and trapping of heavy alkaline-earth element barium have been demonstrated for the first time ever. For any possible cycling transition in barium that could provide strong cooling forces, the excited state has a very large branching probability to metastable states. Additional lasers

  16. Controlling Barium Sulphate Scale Deposition Problems in an unbleached Kraft Paper Mill

    CSIR Research Space (South Africa)

    Sithole, Bruce

    2015-06-01

    Full Text Available /phosphonates and polyacrylates were effective in reducing and controlling the scale deposit problems. Institution of these measures led to a cleaner paper machine that required far fewer boil outs than before. In addition, productivity improved and the fisheye defects...

  17. Microanalytical identification of barium sulphate crystals in statoliths of Chara Rhizoids

    Science.gov (United States)

    Schroeter, K.; Lauchli, A.; Sievers, A. J.

    1979-01-01

    In contrast to higher plants, Chara rhizoids contain statolith vacuoles filled with biocrystallites of BaS04 in the form of rods composed of globular subunits ca. 7 nm in diameter. The revelation of the crystallites under electron microscopy is dependent on the fixative; best structural preservation was observed after fixation in a buffered glutaraldehyde + acrolein solution; 0s04 and KMnO4 partially dissolved both the biocrystallites and synthetic BaS04.

  18. Barium transport in fluorescent lamps

    Science.gov (United States)

    Sigeneger, F.; Rackow, K.; Uhrlandt, D.; Ehlbeck, J.; Lieder, G.

    2008-10-01

    The transport of barium atoms and ions in the cathode region of fluorescent lamps driven at 25,Hz is studied experimentally and theoretically. The density of Ba atoms and ions have been measured time-resolved by laserinduced fluorescence at different distances from the spot center. Furthermore, the time-dependent cathode fall voltage was approximately determined using an improved band method. The model comprises the solution of the time-dependent particle balance equations of Ba and Ba^+ which include the Ba ionization as gain and loss terms, respectively. The ionization rate coefficient of Ba and the electron density are determined by solving the space-dependent electron Boltzmann equation in spherical geometry using the measured cathode fall voltage and the discharge current as input. Good agreement between the measured and calculated density profiles of barium atoms has been obtained. The results demonstrate the sensitive dependence of the Ba density profiles on the ionization which leads to a strong depletion of the Ba density in the cathode phase of the investigated electrode. The model yields the Ba flux from the cathode which limits the lifetime of the lamp.

  19. Anticoagulant property of sulphated polysaccharides extracted from ...

    African Journals Online (AJOL)

    The marine brown algae: Sargassum tenerrimum, Sargassum wightii, Turbinaria conoides, Turbinaria ornata and Padina tetrastromatica were collected from Mandapam Island, India. The crude sulphated polysaccharides (SPS) were extracted using hot water and examined for anticoagulation activity. The sugar, sulphate ...

  20. Improved sulphate removal rates at increased sulphide ...

    African Journals Online (AJOL)

    Improved sulphate removal rates at increased sulphide concentration in the sulphidogenic bioreactor. ... The results of three investigations operating a continuous reactor, a column reactor and batch-test reactors have shown that increased sulphide concentrations have resulted in improved biological sulphate reduction.

  1. Effect of variations in the redox potential of Gleysol on barium mobility and absorption in rice plants.

    Science.gov (United States)

    Magalhães, Marcio Osvaldo Lima; Sobrinho, Nelson Moura Brasil do Amaral; Zonta, Everaldo; de Carvalho, Michel Miranda; Tolón-Becerra, Alfredo

    2012-09-01

    Two assays were designed to obtain information about the influence of redox potential variations on barium mobility and bioavailability in soil. One assay was undertaken in leaching columns, and the other was conducted in pots cultivated with rice (Oryza sativa) using soil samples collected from the surface of Gleysol in both assays. Three doses of barium (100,300 mg kg(-1) and 3000 mg kg(-1)-soil dry weight) and two redox potential values (oxidizing and reducing) were evaluated. During the incubation period, the redox potential (Eh) was monitored in columns and pots until values of -250 mV were reached. After the incubation period, geochemical partitioning was conducted on the barium using the European Communities Bureau of Reference (BCR) method. Rainfall of 200 mm d(-1) was simulated in the columns and in the planting of rice seedlings in the pots. The results of the geochemical partitioning demonstrated that the condition of reduction favors increased barium concentrations in the more labile chemical forms and decreased levels in the chemical forms related to oxides. The highest barium concentrations in leached extracts (3.36 mg L(-1)) were observed at the highest dose and condition of reduction at approximately five times above the drinking water standard. The high concentrations of barium in the soil did not affect plant dry matter production. The highest levels and accumulation of barium in roots, leaves, and grains of rice were found at the highest dose and condition of reduction. These results demonstrate that reduction leads to solubilization of barium sulfate, thereby favoring greater mobility and bioavailability of this element. Copyright © 2012 Elsevier Ltd. All rights reserved.

  2. 75 FR 19657 - Barium Chloride From China

    Science.gov (United States)

    2010-04-15

    ... antidumping duty order on barium chloride from China would be likely to lead to continuation or recurrence of.... Persons with mobility impairments who will need special assistance in gaining access to the Commission...

  3. Barium Isotopes in Single Presolar Grains

    Science.gov (United States)

    Pellin, M. J.; Davis, A. M.; Savina, M. R.; Kashiv, Y.; Clayton, R. N.; Lewis, R. S.; Amari, S.

    2001-01-01

    Barium isotopic compositions of single presolar grains were measured by laser ablation laser resonant ionization mass spectrometry and the implications of the data for stellar processes are discussed. Additional information is contained in the original extended abstract.

  4. Intravenous and intramuscular magnesium sulphate regimens in ...

    African Journals Online (AJOL)

    eclampsia. Sarah Chissell, Julia H. Botha, Jack Moodley, Lynn McFadyen. Abstract. Patients with severe pre-eclampsia were randomised to receive magnesium sulphate according to an intramuscular (IM) (N =9) or an intravenous (IV) (N =8) ...

  5. Lead sulphate leaching by sodium chloride solution

    National Research Council Canada - National Science Library

    Conić Vesna T; Pešovski Branka D; Cvetkovski Vladimir B; Stanojević-Šimšić Zdenka S; Dragulović Suzana S; Simonović Danijela B; Dimitrijević Silvana B

    2013-01-01

    Bioleaching treatment of complex multi-metallic Cu-Zn-Pb-Ag-Au mineral concentrates leds to the formation, besides easily soluble zinc and cooper sulphates, of hardly soluble lead (II) sulfate (PbSO4) sludge...

  6. Thermochemical hydrogen production via a cycle using barium and sulfur - Reaction between barium sulfide and water

    Science.gov (United States)

    Ota, K.; Conger, W. L.

    1977-01-01

    The reaction between barium sulfide and water, a reaction found in several sulfur based thermochemical cycles, was investigated kinetically at 653-866 C. Gaseous products were hydrogen and hydrogen sulfide. The rate determining step for hydrogen formation was a surface reaction between barium sulfide and water. An expression was derived for the rate of hydrogen formation.

  7. Warming barium sulfate improves esophageal leak detection in pig model.

    Science.gov (United States)

    Raman, Vignesh; MacGlaflin, Caitlyn E; Moodie, Karen L; Kaiser, Larry R; Erkmen, Cherie P

    2015-12-01

    Barium esophagograms have poor sensitivity in detecting leaks. We hypothesized that heating barium would decrease viscosity, facilitate extravasation, and enhance its sensitivity in detecting esophageal leaks. We characterized the viscosity of barium at increasing temperatures. We measured the radiopacity of barium at 25°C and 50°C. We determined the smallest diameter defect in esophagus that barium can detect by perforating a porcine esophageal segment with angiocatheters of various diameters, injecting barium at 25°C, and observing extravasation of contrast. We repeated this with barium heated to 30°C, 40°C, 50°C, and 70°C. To determine the ability of barium to detect a staple line leak, we perforated a stapled esophageal segment by air insufflation, injected barium at different temperatures, and monitored extravasation. We used Visipaque, a water-soluble contrast agent, for comparison in all experiments. The viscosity of barium decreased with increasing temperature. The radiopacity of barium did not change with increasing temperature and was higher than that of Visipaque (P barium at 25°C to 1.3 mm at 40°C and 1.1 mm with Visipaque (P barium at 25°C to 80% (P = 0.02) with barium at 40°C. There was no significant difference in sensitivity between barium at 40°C and Visipaque. Barium warmed to 40°C offers the best sensitivity of esophageal leak detection without compromising radiopacity. Barium at 40°C may be the optimum choice for swallow study to detect esophageal leaks. Copyright © 2015 Elsevier Inc. All rights reserved.

  8. Environmental risks of metals mobilised from acid sulphate soils in Finland. A literature review

    Energy Technology Data Exchange (ETDEWEB)

    Faeltmarsch, R. (Aabo Akademi, Turku (Finland)); Aastroem, M. (Kalmar Univ., Kalmar (Sweden)); Vuori, K.-M. (Univ. of Oulu, Oulu (Finland))

    2008-07-01

    The objective of this study was to review the available research information on the environmental risks and effects of metals leached from Finnish acid sulphate soils. The reason for carrying out this study was recent evidence demonstrating that much larger quantities of a number of metals are leached from these soils than from the entire Finnish industry taken together. Alarmingly few scientific studies on the actual biological impacts of acid sulphate soils have been published. However, they all indicate an extensive and serious effect on biota, including metal imbalance in crops and elevated concentrations of Al and Zn in the milk of cows. Acid sulphate soils have also significant, but spatially and temporally variable impacts on biodiversity and community structure of fish, benthic invertebrates and macrophytes, with numerous cases of mass fish kills along the Finnish coast. Furthermore, chronic exposure to high concentrations of metals may pose an actual threat on human health. The potential risks for Alzheimer's and Parkinson's disease in acid sulphate soil landscapes are discussed. (orig.)

  9. Zinc sulphate and vitamin E alleviate reproductive toxicity caused by aluminium sulphate in male albino rats.

    Science.gov (United States)

    Rawi, Sayed M; Seif Al Nassr, Fatma M

    2015-03-01

    This study was designed to investigate the reproductive toxicity of aluminium sulphate and the therapeutic effects of administration of zinc sulphate and vitamin E individually or in combination against the toxic effect caused by aluminium (Al) in male albino rats. The animals were divided into five groups: group 1 received distilled water and served as control; group 2 received only aluminium sulphate (50 mg/kg body weight (b.w.)); group 3 received aluminium sulphate (50 mg/kg b.w.) plus zinc sulphate (50 mg/kg b.w.); group 4 received aluminium sulphate (50 mg/kg b.w.) and vitamin E (15 mg/kg b.w.); group 5 received aluminium sulphate plus a combination of zinc sulphate and vitamin E in similar doses as above. Doses were administered orally once daily for 45 consecutive days. The results revealed that aluminium sulphate induced significant decrease in body weight gain and testis weight and significant increase in Al level in both serum and testes of male rats. Biochemical analysis showed significant decrease in serum total protein and phospholipids levels, while serum total lipid was significantly elevated post Al treatment. In addition, significant decrease in total protein, phospholipids and cholesterol levels in the testes of Al-treated rats was recorded. The data also showed significant decrease in the levels of serum testosterone, leutinizing hormone and follicle stimulating hormone and significant increase in the level of serum prolactin in Al-intoxicated rats. Moreover, histological examination showed that aluminium sulphate caused apparent alterations in the testicular structure of the treated animals. Treatment with zinc sulphate and vitamin E individually or in combination ameliorated the harmful effects of Al, which was proved histopathologically by the noticeable improvement in the testicular tissues. We can conclude that the tested dose of aluminium sulphate induced toxic effect on the reproductive system of male albino rats and the treatment with

  10. The Reclamation of Industrial Wastes Inclusive Sulphates by Sulphate-Reducing Bacteria

    Directory of Open Access Journals (Sweden)

    Mária Kušnierová

    2004-12-01

    Full Text Available The objective of our study was to verify experimentally the possibility of using coal mine drainage and gypsum from the „stabilizate“ (the final product from the combustion desulphurisation as the source of sulphate for the cultivation of SRB with the prospect of: purging of mine waste waters inclusive sulphates, recycling of desulphurisation agent (limestone and production of elemental sulphur from hydrogen sulphide. The results confirmed the theoretical assumptions on the use of gypsum, which forms the substantial component of „stabilizate“, as the source of sulphate for sulphate-reducing bacteria, which produce hydrogen sulphide in the process of bacterial reduction of sulphates. They also showed the possibility of recycling the desulphurisation agent – limestone, as well as the realistic alternative of using „stabilizate“ in the production of elemental sulphur which still represents an important raw material needed in chemical, paper or other industries.

  11. High concentration photovoltaic systems applying III-V cells

    Energy Technology Data Exchange (ETDEWEB)

    Zubi, Ghassan; Bernal-Agustin, Jose L. [Department of Electrical Engineering, University of Zaragoza, Calle Maria de Luna 3, 50018 Zaragoza (Spain); Fracastoro, Gian Vincenzo [Department of Energetics, Politecnico of Turin, Corso Duca degli Abruzzi 24, 10129 Torino (Italy)

    2009-12-15

    High concentration systems make use of the direct solar beam and therefore are suitable for application in regions with high annual direct irradiation values. III-V PV cells with a nominal efficiency of up to 39% are readily available in today's market, with further efficiency improvements expected in the years ahead. The relatively high cost of III-V cells limits their terrestrial use to applications under high concentration, usually above 400 suns. In this way the relatively high cell cost is compensated through the low amount for cells needed per kW nominal system output. This paper presents a state of the art of high concentration photovoltaics using III-V cells. This PV field accounts already for more than 20 developed systems, which are commercially available or shortly before market introduction. (author)

  12. Magnesium sulphate versus phenytoin for eclampsia.

    Science.gov (United States)

    Duley, Lelia; Henderson-Smart, David J; Chou, Doris

    2010-10-06

    Eclampsia, the occurrence of a seizure in association with pre-eclampsia, remains a rare but serious complication of pregnancy. A number of different anticonvulsants have been used to control eclamptic fits and to prevent further seizures. The objective of this review was to assess the effects of magnesium sulphate compared with phenytoin when used for the care of women with eclampsia. Magnesium sulphate is compared with diazepam and with lytic cocktail in other Cochrane reviews. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (30 April 2010). Randomised trials comparing magnesium sulphate (intravenous or intramuscular administration) with phenytoin for women with a clinical diagnosis of eclampsia. Two review authors assessed trial quality and extracted data. We have included data from seven trials, involving 972 women. One large trial (775 women) was of good quality. Magnesium sulphate was associated with a substantial reduction in the recurrence of seizures, when compared to phenytoin (six trials, 972 women; risk ratio (RR) 0.34, 95% confidence interval (CI) 0.24 to 0.49). The trend in maternal mortality favours magnesium sulphate, but the difference does not reach statistical significance (three trials, 847 women; RR 0.50, 95% CI 0.24 to 1.05). There were reductions in the risk of pneumonia (one trial, RR 0.44, 95% CI 0.24 to 0.79), ventilation (one trial, RR 0.68, 95% CI 0.50 to 0.91) and admission to an intensive care unit (one trial, RR 0.67, 95% CI 0.50 to 0.89) associated with the use of magnesium sulphate rather than phenytoin.For the baby, magnesium sulphate was associated with fewer admissions to a special care baby unit (SCBU) (one trial, 518 babies; RR 0.73, 95% CI 0.58 to 0.91) and fewer babies who died or were in SCBU for more than seven days (one trial, 643 babies; RR 0.77, 95% CI 0.63 to 0.95) than phenytoin. There was no clear difference in perinatal deaths (two trials, 665 babies; (RR 0.85, 95% CI 0.67 to 1

  13. Determination of barium in natural waters by ICP-OES technique. Part II: Assessment of human exposure to barium in bottled mineral and spring waters produced in Poland.

    Science.gov (United States)

    Garboś, Sławomir; Swiecicka, Dorota

    2013-01-01

    groundwater intakes applied during production is actually used. The estimated Hazard Quotient indices were in the ranges: 0.0019 - 0.16 (natural mineral waters) and 0.00063 - 0.061 (natural spring waters), respectively. The natural mineral waters are usually characterized by higher Ba concentrations than those observed in the cases of natural spring waters. The presence of a high concentration of HCO3- in such types of natural waters ensures the existence of Ba2+ in solution as Ba(HCO3)2, which is a highly soluble salt. Taking into account the concentrations of barium determined in above-mentioned waters and the available toxicological data for this metal no long-term risk for human health could be expected (estimated Hazard Quotient indices < or = 0.16).

  14. Outcome of barium enema in patients with colorectal symptoms ...

    African Journals Online (AJOL)

    Outcome of barium enema in patients with colorectal symptoms. YB Mensah, JCB Dakubo. Abstract. Background: For many years, double contrast barium enema has been an effective way to evaluate the large bowel. With the development of the colonoscope, the role of barium enema has been questioned. However it

  15. Production of glucose syrups in highly concentrated systems

    NARCIS (Netherlands)

    Veen, van der M.E.; Goot, van der A.J.; Boom, R.M.

    2005-01-01

    We have investigated the hydrolysis of maltodextrins in a high concentration (up to 70%), by means of enzymatic and acid catalysis. The study revealed that the equilibrium compositions of the catalyzed reactions were kinetically determined by the selectivity of the catalyst, the substrate

  16. The virucidal spectrum of a high concentration alcohol mixture

    NARCIS (Netherlands)

    van Engelenburg, F. A. C.; Terpstra, F. G.; Schuitemaker, H.; Moorer, W. R.

    2002-01-01

    The virucidal spectrum of a high concentration alcohol mixture (80% ethanol and 5% isopropanol) was determined for a broad series of lipid-enveloped (LE) and non-lipid-enveloped (NLE) viruses covering all relevant blood-borne viruses. LE viruses were represented by human immunodeficiency virus

  17. Effects of high concentration of chromium stress on physiological ...

    African Journals Online (AJOL)

    We studied the effects of high concentration of chromium (Cr) stress on physiological and biochemical characters and accumulation of Cr in Pingyang Tezao tea [Camellia sinensis (L) O. Kutze 'Pingyangtezao'] through a pot experiment. The results show that the indicators of photosynthesis were all suppressed with ...

  18. The Application of Sulphate-Reducing Bacteria for the Heavy Metals Elimination from Acid Mine Drainage

    Directory of Open Access Journals (Sweden)

    Alena Luptáková

    2004-12-01

    Full Text Available One of the most important problems affecting mining companies around the world is the treatment of acid mine drainage (AMD. AMD is characterised by its high acidity, high concentration of metals (Cu, Zn, Cd,… and high concentration of dissolved sulphates. The techniques traditionally used for the treatment of AMD have been based on chemical methods of neutralization and precipitation. A possible alternative to the chemical treatment of AMD is bioremediation using anaerobic sulphate-reducing bacteria (SRB. The treatment of AMD by SRB is based on the ability of SRB to reduce sulphates to hydrogen sulphide, which binds readily with metals to form sparingly soluble precipitates. In this study we have attempted to investigate the feasibility of anaerobic biotreatment of the copper contaminated model solution and a real effluent AMD from the shaft Pech (the locality Smolnik using SRB. This method involves three stages: The H2S production by sulphate-reducing bacteria, the metals precipitation by the biologically produced H2S and the metal sulphides filtration. The studies confirm that copper was effectively recovered from the solution using bacterial produced H2S. An initial copper concentration 10 mg.l-1 was decreased to less than 0.05 mg.l-1 after 3 hours. The most adequate pH value for cooper precipitation was 2.5. Results of the copper precipitation from the areal effluent indicates that the optimal pH value for the copper precipitation is 3.5, but the created precipitates contain a mixture of copper and iron sulphides.

  19. Characterization and reactivity assessment of organic substrates for sulphate-reducing bacteria in acid mine drainage treatment.

    Science.gov (United States)

    Zagury, Gerald J; Kulnieks, Viktors I; Neculita, Carmen M

    2006-08-01

    Acid mine drainage (AMD), which contains high concentrations of sulphate and dissolved metals, is a serious environmental problem. It can be treated in situ by sulphate reducing bacteria (SRB), but effectiveness of the treatment process depends on the organic substrate chosen to supply the bacteria's carbon source. Six natural organic materials were characterized in order to investigate how well these promote sulphate reduction and metal precipitation by SRB. Maple wood chips, sphagnum peat moss, leaf compost, conifer compost, poultry manure and conifer sawdust were investigated in terms of their carbon (TOC, TIC, DOC) and nitrogen (TKN) content, as well as their easily available substances content (EAS). Single substrates, ethanol, a mixture of leaf compost (30% w/w), poultry manure (18% w/w), and maple wood chips (2% w/w), and the same mixture spiked with formaldehyde were then tested in a 70-day batch experiment to evaluate their performance in sulphate reduction and metal removal from synthetic AMD. Metal removal efficiency in batch reactors was as high as 100% for Fe, 99% for Mn, 99% for Cd, 99% for Ni, and 94% for Zn depending on reactive mixtures. Early metal removal (0-12d) was attributed to the precipitation of (oxy)hydroxides and carbonate minerals. The lowest metal and sulphate removal efficiency was found in the reactor containing poultry manure as the single carbon source despite its high DOC and EAS content. The mixture of organic materials was most effective in promoting sulphate reduction, followed by ethanol and maple wood chips, and single natural organic substrates generally showed low reactivity. Formaldehyde (0.015% (w/v)) provided only temporary bacterial inhibition. Although characterization of substrates on an individual basis provided insight on their chemical make-up, it did not give a clear indication of their ability to promote sulphate reduction and metal removal.

  20. Computerised analysis of sulphate action on model concrete piles

    Digital Repository Service at National Institute of Oceanography (India)

    Deshmukh, A.M.; Balasubramanian, S.; Venugopal, C.

    the influence of magnesium sulphate on model reinforced concrete piles. The sulphate action on the corrosion rate of rebar in concrete has been distinctly studied through sophisticated computerised potentiodynamic technique. The corrosion of rebar has been...

  1. Work Function Calculation For Hafnium- Barium System

    Directory of Open Access Journals (Sweden)

    K.A. Tursunmetov

    2015-08-01

    Full Text Available The adsorption process of barium atoms on hafnium is considered. A structural model of the system is presented and on the basis of calculation of interaction between ions dipole system the dependence of the work function on the coating.

  2. Thermal decomposition of barium valerate in argon

    DEFF Research Database (Denmark)

    Torres, P.; Norby, Poul; Grivel, Jean-Claude

    2015-01-01

    The thermal decomposition of barium valerate (Ba(C4H9CO2)(2)/Ba-pentanoate) was studied in argon by means of thermogravimetry, differential thermal analysis, IR-spectroscopy, X-ray diffraction and hot-stage optical microscopy. Melting takes place in two different steps, at 200 degrees C and 280...

  3. Magneto-optical trapping of barium

    NARCIS (Netherlands)

    De, S.; Dammalapati, U.; Jungmann, K.; Willmann, L.

    Laser cooling and trapping of the heavy alkaline-earth-metal element barium has been achieved based on the strong 6s(2) (1)S(0)-6s6p (1)P(1) transition. The excited state decays to a large fraction into metastable D states. Two schemes were implemented where three additional laser-driven transitions

  4. 75 FR 20625 - Barium Chloride From China

    Science.gov (United States)

    2010-04-20

    ... From the Federal Register Online via the Government Publishing Office INTERNATIONAL TRADE COMMISSION Barium Chloride From China AGENCY: United States International Trade Commission. ACTION: Revised schedule for the subject review. DATES: Effective Date: April 9, 2010. FOR FURTHER INFORMATION CONTACT: Amy...

  5. Characterization of sulphate scaling formation damage from laboratory measurements to predict well productivity decline

    Energy Technology Data Exchange (ETDEWEB)

    Bedrikovetsky, P.G.; Monteiro, R. [Universidade Estadual do Norte Fluminense (UENF), Macae, RJ (Brazil). Lab. de Engenharia e Exploracao de Petroleo (LENEP); Moraes, G.P. [Centro Federal de Educacao Tecnologica (CEFET), Macae, RJ (Brazil). Unidade de Ensino Descentralizada (UNED-Macae); Lopes Junior, R.P. [PETROBRAS, Macae, RJ (Brazil). Unidade de Negocios da Bacia de Campos; Rosario, F.F.; Bezerra, M.C. [PETROBRAS, Rio de Janeiro, RJ (Brazil). Centro de Pesquisas (CENPES)

    2004-07-01

    Barium sulphate scaling is a chronicle disaster during offshore waterflood project where injected and formation waters are incompatible, and their mixing causes salt precipitation. It was detected in several fields of Campos Basin. The mathematical model for sulphate precipitation contains two empirical parameters: the reaction kinetics coefficient that characterizes how fast the precipitation is going on, and the formation damage coefficient showing which permeability impairment the precipitation causes. Knowledge of these two parameters is essential for reliable prediction of the well productivity decline during sea/produced water injection. These parameters are empirical and depend on rock properties; therefore they should be determined from laboratory coreflood tests by forcing the injected and formation waters through rock. Despite these tests have been presented in numerous papers, there were no attempts to determine the model coefficients from laboratory data in order to perform the laboratory-data-based reservoir simulation. A new method for simultaneous determination of both coefficients from the coreflood data is developed. The method determines the kinetic coefficient from ion concentration measurements at the core effluent; then the formation damage coefficient is determined from the pressure drop measurements. The laboratory procedures are routine, the data are available in the literature. The method is based on inverse problem for reactive flow in rocks. The inverse solution is obtained from the exact quasi steady state concentration profile during coreflood. The proposed method furnishes unique values for two coefficients, and the solution is stable with respect to small perturbations of the measured values. The laboratory data on sulphate scaling by CENPES/PETROBRAS, Brazil, and Herriot-Watt University, UK, were treated, and the data were used for prediction of productivity decline in Campos Basin reservoir. The well behaviour forecast and history

  6. The sulphate-reduction alkalinity pump tested

    Science.gov (United States)

    Meister, Patrick; Petrishcheva, Elena

    2016-04-01

    Carbonate precipitation has been suggested to be induced by alkalinity increase during sulphate reduction under anoxic conditions. This mechanism may explain the formation of carbonate deposits in shallow marine environments, either within a redox stratified sediment inhabited by phototrophic microbial mats or in shallow water within the photic zone where sulphidic water is upwelling onto the shelf. The alkalinity pump may work as long as the sulphide is not reoxidized to sulphate, a process that would acidify the surrounding. The alkalinity effect of sulphate reduction was recently tested by Aloisi (2008) for microbial mats using a model approach. He found that sulphate reduction does not significantly increase or even decrease carbonate saturation and is unlikely to have played a significant role through Earth history. The model considers many environmental factors, including the effect of carbonate precipitation itself on the carbonate equilbrium and on the alkalinity. We used a modified version of Aloisi's (2008) model to simulate the saturation states of aragonite, calcite and dolomite without the effects of carbonate precipitation. This is necessary to evaluate the effect of microbial metabolisms exclusively on carbonate saturation, since carbonate precipitation is only the consequence, but not the cause of oversaturation. First results show that the saturation state is increased in the zone of phototrophic CO2 uptake. In contrast, the saturation state is strongly decreased in the zone where dissolved oxygen overlaps with dissolved sulphide. Aerobic sulphide oxidation consumes most of the HS- and dissipates most of the alkalinity produced in the sulphate reduction zone below. Hence, our results are consistent with the findings of Aloisi (2008), and they even more clearly show that sulphate reduction does not induce carbonate precipitation nor contributes to carbonate precipitation in combination with phototrophic CO2 uptake. The alkalinity effect of sulphate

  7. Magnesium sulphate versus diazepam for eclampsia.

    Science.gov (United States)

    Duley, Lelia; Henderson-Smart, David J; Walker, Godfrey Ja; Chou, Doris

    2010-12-08

    Eclampsia, the occurrence of a seizure in association with pre-eclampsia, remains a rare but serious complication of pregnancy. A number of different anticonvulsants are used to control eclamptic fits and to prevent further fits. The objective of this review was to assess the effects of magnesium sulphate compared with diazepam when used for the care of women with eclampsia. Magnesium sulphate is compared with phenytoin and with lytic cocktail in other Cochrane reviews. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (30 September 2010) and CENTRAL (2010, Issue 3). Randomised trials comparing magnesium sulphate (intravenous or intramuscular administration) with diazepam for women with a clinical diagnosis of eclampsia. Two authors assessed and extracted data independently. We have included seven trials, involving 1396 women. Three trials (1030 women) were good quality. Magnesium sulphate was associated with a reduction in maternal death (seven trials;1396 women; risk ratio (RR) 0.59, 95% confidence interval (CI) 0.38 to 0.92) and recurrence of seizures (seven trials;1390 women; RR 0.43, 95% CI 0.33 to 0.55) compared to diazepam. There were no clear differences in other measures of maternal morbidity.There was no clear difference in perinatal mortality (four trials; 788 infants; RR 1.04, 95% CI 0.81 to 1.34) or neonatal mortality (four trials; 759 infants; RR 1.18, 95% CI 0.75 to 1.84). In the magnesium sulphate group, fewer liveborn babies had an Apgar score less than seven at one minute (two trials; 597 babies; RR 0.75, 95% CI 0.65 to 0.87) or at five minutes (RR 0.70, 95% CI 0.54 to 0.90), and fewer appeared to need intubation at the place of birth (two trials; 591 infants; RR 0.67, 95% CI 0.45 to 1.00). There was no difference in admission to a special care nursery (four trials; 834 infants; RR 0.91, 95% CI 0.79 to 1.05), but fewer babies in the magnesium sulphate group had a length of stay more than seven days (three trials 631 babies

  8. Magnesium sulphate versus lytic cocktail for eclampsia.

    Science.gov (United States)

    Duley, Lelia; Gülmezoglu, A Metin; Chou, Doris

    2010-09-08

    Eclampsia, the occurrence of a seizure in association with pre-eclampsia, is a rare but serious complication of pregnancy. A number of different anticonvulsants have been used to control eclamptic fits and to prevent further seizures. The objective of this review was to assess the effects of magnesium sulphate compared with lytic cocktail (usually chlorpromazine, promethazine and pethidine) when used for the care of women with eclampsia. Magnesium sulphate is compared with diazepam and with phenytoin in other Cochrane reviews. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (July 2010) and the Cochrane Central Register of Trials (The Cochrane Library 2010, Issue 2). Randomised trials comparing magnesium sulphate (intravenous or intramuscular administration) with lytic cocktail for women with a clinical diagnosis of eclampsia. Two review authors (L Duley and D Chou) assessed trial quality and extracted data. We included three small trials (total 397 women) of average quality in the review. Magnesium sulphate was associated with fewer maternal deaths (risk ratio (RR) 0.14, 95% confidence interval (CI) 0.03 to 0.59; 3 trials, 397 women) and was better at preventing further seizures (RR 0.06, 95% CI 0.03 to 0.12; 3 trials, 397 women) than lytic cocktail. Magnesium sulphate was also associated with less respiratory depression (RR 0.12, 95% CI 0.02 to 0.91; 2 trials, 198 women), less coma (RR 0.04, 95% CI 0.00 to 0.74; 1 trial, 108 women), and less pneumonia (RR 0.20, 95% CI 0.06 to 0.67; 2 trials, 307 women). There was no clear difference in the RR for any death of the baby (RR 0.35, 95% CI 0.05 to 2.38, random effects; 2 trials, 177 babies). Magnesium sulphate, rather than lytic cocktail, for women with eclampsia reduces the RR of maternal death, of further seizures and of serious maternal morbidity (respiratory depression, coma, pneumonia). Magnesium sulphate is the anticonvulsant of choice for women with eclampsia; the use of lytic cocktail

  9. Barium carbonate as an agent to improve the electrical properties of neodymium-barium-copper system at high temperature

    Energy Technology Data Exchange (ETDEWEB)

    Fernandes, J.P. [Post-Graduate Program in Chemical Engineering, Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, 88040-900 (Brazil); Duarte, G.W. [Post-Graduate Program in Chemical Engineering, Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, 88040-900 (Brazil); Research Group in Technology and Information, Centro Universitário Barriga Verde (UNIBAVE), Santa Catarina, SC (Brazil); Caldart, C. [Post-Graduate Program in Science and Materials Engineering, Universidade do Extremo Sul Catarinense (UNESC), Criciúma, SC, 88806-000 (Brazil); Kniess, C.T. [Post-Graduate Program in Professional Master in Management, Universidade Nove de Julho, São Paulo, SP (Brazil); Montedo, O.R.K.; Rocha, M.R. [Post-Graduate Program in Science and Materials Engineering, Universidade do Extremo Sul Catarinense (UNESC), Criciúma, SC, 88806-000 (Brazil); Riella, H.G. [Post-Graduate Program in Chemical Engineering, Universidade Federal de Santa Catarina (UFSC), Florianópolis, SC, 88040-900 (Brazil); Fiori, M.A., E-mail: fiori@unochapeco.edu.br [Post-Graduate Program in Environmental Science, Universidade Comunitária da Região de Chapecó (UNOCHAPECÓ), Chapecó, SC, 89809-000 (Brazil); Post-Graduate Program in Technology and Management of the Innovation, Universidade Comunitária da Região de Chapecó (UNOCHAPECÓ), Chapecó, SC, 89809-000 (Brazil)

    2015-11-15

    Specialized ceramics are manufactured under special conditions and contain specific elements. They possess unique electrical and thermal properties and are frequently used by the electronics industry. Ceramics containing neodymium-barium-copper (NBC) exhibit high conductivities at low temperatures. NBC-based ceramics are typically combined with oxides, i.e., NBCo produced from neodymium oxide, barium oxide and copper oxide. This study presents NBC ceramics that were produced with barium carbonate, copper oxide and neodymium oxide (NBCa) as starting materials. These ceramics have good electrical conductivities at room temperature. Their conductivities are temperature dependent and related to the starting amount of barium carbonate (w%). - Highlights: • The new crystalline structure were obtained due presence of the barium carbonate. • The NBCa compound has excellent electrical conductivity at room temperature. • The grain crystalline morphology was modified by presence of the barium carbonate. • New Phases α and β were introduced by carbonate barium in the NBC compound.

  10. Comparison of a 4-Day versus 2-Day Low Fiber Diet Regimen in Barium Tagging CT Colonography in Incomplete Colonoscopy Patients

    Directory of Open Access Journals (Sweden)

    Kaan Meric

    2015-01-01

    Full Text Available Our aim was to compare the amount of residual feces, residual fluid, the tagging quality, and patient compliance using 4-day versus 2-day low fiber diet regimen in barium tagging CT colonography in incomplete colonoscopy patients. Methods. A total of 101 patients who underwent CT colonography were assigned to 2-day diet group (n=56 and 4-day diet group (n=45. Fecal tagging was achieved with barium sulphate while bisacodyl and sennoside B were used for bowel preparation. Residual solid stool was divided into two groups measuring 0.05. The prevalence of moderate discomfort was significantly higher in 4-day group (P<0.001. Conclusion. Our study shows that 2-day limited bowel preparation regimen for fecal tag CT colonography is a safe and reasonable technique to evaluate the entire colon, particularly in incomplete conventional colonoscopy patients.

  11. High concentration methanol fuel cells: Design and theory

    Science.gov (United States)

    Shaffer, Christian E.; Wang, Chao-Yang

    Use of highly concentrated methanol fuel is required for direct methanol fuel cells (DMFCs) to compete with the energy density of Li-ion batteries. Because one mole of H 2O is needed to oxidize one mole of methanol (CH 3OH) in the anode, low water crossover to the cathode or even water back flow from the cathode into the anode is a prerequisite for using highly concentrated methanol. It has previously been demonstrated that low or negative water crossover can be realized by the incorporation of a low-α membrane electrode assembly (MEA), which is essentially an MEA designed for optimal water management, using, e.g. hydrophobic anode and cathode microporous layers (aMPL and cMPL). In this paper we extend the low-α MEA concept to include an anode transport barrier (aTB) between the backing layer and hydrophobic aMPL. The main role of the aTB is to act as a barrier to CH 3OH and H 2O diffusion between a water-rich anode catalyst layer (aCL) and a methanol-rich fuel feed. The primary role of the hydrophobic aMPL in this MEA is to facilitate a low (or negative) water crossover to the cathode. Using a previously developed 1D, two-phase DMFC model, we show that this novel design yields a cell with low methanol crossover (i.e. high fuel efficiency, ∼80%, at a typical operating current density of ∼80-90% of the cell limiting current density), while directly feeding high concentration methanol fuel into the anode. The physics of how the aTB and aMPL work together to accomplish this is fully elucidated. We further show that a thicker, more hydrophilic, more permeable aTB, and thicker, more hydrophobic, and less permeable aMPL are most effective in accomplishing low CH 3OH and H 2O crossover.

  12. Delayed Awareness of the History of Barium Examination: Perforated Barium Appendicitis

    Directory of Open Access Journals (Sweden)

    Susumu Saigusa

    2017-01-01

    Full Text Available A 41-year-old man presented to our hospital with lower abdominal pain and a high-grade fever. Physical examination revealed rebound tenderness and guarding in the lower abdomen. Abdominal X-ray examination showed a radiopaque object in the right lower quadrant of the abdomen. Abdominal computed tomography (CT demonstrated that the object had a strong artifact with over 10,000 Hounsfield units, as well as ascites around the terminal ileum. We diagnosed acute peritonitis with a suspicion of the perforation due to unknown foreign body and performed an emergency laparotomy. Operative findings showed a contained perforation of a phlegmonous appendicitis, and appendectomy was performed. The resected specimen demonstrated that the appendix contained a fecalith, and histopathological examination showed the crystal structure of barium sulfate in the lumen of the appendix. Unfortunately, we did not obtain the history of screening for gastric cancer using a barium examination one month prior to our appendectomy. Our experience demonstrates the importance of establishing a history of barium examinations of the gastrointestinal tract in a patient with a radiopaque object in the right lower quadrant of the abdomen for early diagnosis of barium appendicitis. Additionally, early diagnosis of barium appendicitis may affect the selection of surgical procedures.

  13. Optimal design of high concentration reflected photovoltaic module

    Science.gov (United States)

    Hsu, Cheng-Yi; Lin, Yuli

    2017-09-01

    In this study, a fabrication and design process of a high concentration reflected photovoltaic (HCRPV) using 3x3 array modules with the light guide tube and III-V solar cells are demonstrated. The developed and designed of 3x3 array modules with the light guide tube following key design aims are all satisfied with highly uniform irradiance on the solar cell absorber and maximum light collective efficiency. With the use of the maximum peak power output from the tracking system which had two phases of X-Y axis and θ-axis tracking the sun position precisely and getting. With an optimized high concentration reflected photovoltaic systems of 3x3 array modules with the light guide tube, the optimal condition and measured characteristics and efficiency was conducted. This improved HCRPV performance is attributed to the enhanced collection light power from a big reflected mirror area. The HCRPV module was then fabricated using Aluminum material and it was coated with silver material. From the simulation results, the light collective efficiency can be reached to about 94.9% with uniform irradiance. From the measurement results, the power can be calculated to be 2.62W˜2.74W, which is about 90% of the power of solar cell (3W) used.

  14. Oral mebeverine in barium enema preparation.

    Science.gov (United States)

    Messios, N; Shaker, M; Berry, J M

    1982-05-03

    A double blind controlled trial to determine the effect of mebeverine (Colofac) pre-medication on the incidence of spasm, pain and discomfort during examination of the colon by double contrast barium enema was carried out. There was a significant reduction in spasm on fluoroscopy and reported pain and discomfort in the mebeverine group. The number of segments of spasm on the radiographs was not significantly reduced.

  15. Deflocculants for Tape Casting Barium Titanate.

    Science.gov (United States)

    1983-07-01

    are discussed in detail by Mitchell and Smith (2). The measurement of free and bound water was performed by titration to an electrometric end point by...the dead- stop ( biamperometric ) technique using a Fisher Model 391 aquametry apparatus. The fundamental theory behind this technique is reviewed p in... Titrations were performed at 25 ± 10C. "i 9 For insoluble materials, such as the barium titanate powder, the solid was added to the pyridine solvent

  16. Nanoparticles of barium induce apoptosis in human phagocytes

    Science.gov (United States)

    Mores, Luana; França, Eduardo Luzia; Silva, Núbia Andrade; Suchara, Eliane Aparecida; Honorio-França, Adenilda Cristina

    2015-01-01

    Purpose Nutrients and immunological factors of breast milk are essential for newborn growth and the development of their immune system, but this secretion can contain organic and inorganic toxins such as barium. Colostrum contamination with barium is an important issue to investigate because this naturally occurring element is also associated with human activity and industrial pollution. The study evaluated the administration of barium nanoparticles to colostrum, assessing the viability and functional activity of colostral mononuclear phagocytes. Methods Colostrum was collected from 24 clinically healthy women (aged 18–35 years). Cell viability, superoxide release, intracellular Ca2+ release, and phagocyte apoptosis were analyzed in the samples. Results Treatment with barium lowered mononuclear phagocyte viability, increased superoxide release, and reduced intracellular calcium release. In addition, barium increased cell death by apoptosis. Conclusion These data suggest that nanoparticles of barium in colostrum are toxic to cells, showing the importance of avoiding exposure to this element. PMID:26451108

  17. BARIUM REDUCTION OF INTUSSUSCEPTION IN INFANCY

    Science.gov (United States)

    Denenholz, Edward J.; Feher, George. S.

    1955-01-01

    Barium enema reduction was used as the initial routine treatment in 29 infants with intussusception. In 22 of them the intussusception was reduced by this means. In three of eight patients operated upon the intussusception was found to be reduced. Four of the remaining five patients had clinical or x-ray evidence of complications before reduction by barium enema was attempted. Twenty-one of the patients, all of whom were observed in private practice, were treated without admission to the hospital. After reduction, these patients were observed closely by the clinician. None of these patients showed clinical or x-ray signs of complications before reduction. Certain clinical and roentgen criteria must be satisfied before it can be concluded that reduction by barium enema is complete. If there are clinical signs of complications with x-ray evidence of small bowel obstruction, only a very cautious attempt at hydrostatic reduction should be made. As the time factor is generally a reliable clinical guide to reducibility, the late cases should be viewed with greater caution. Long duration of symptoms, however, is not per se a contraindication to an attempt at hydrostatic reduction. PMID:13230908

  18. Hertzsprung-Russell diagram and mass distribution of barium stars

    Science.gov (United States)

    Escorza, A.; Boffin, H. M. J.; Jorissen, A.; Van Eck, S.; Siess, L.; Van Winckel, H.; Karinkuzhi, D.; Shetye, S.; Pourbaix, D.

    2017-12-01

    With the availability of parallaxes provided by the Tycho-Gaia Astrometric Solution, it is possible to construct the Hertzsprung-Russell diagram (HRD) of barium and related stars with unprecedented accuracy. A direct result from the derived HRD is that subgiant CH stars occupy the same region as barium dwarfs, contrary to what their designations imply. By comparing the position of barium stars in the HRD with STAREVOL evolutionary tracks, it is possible to evaluate their masses, provided the metallicity is known. We used an average metallicity [Fe/H] = -0.25 and derived the mass distribution of barium giants. The distribution peaks around 2.5 M⊙ with a tail at higher masses up to 4.5 M⊙. This peak is also seen in the mass distribution of a sample of normal K and M giants used for comparison and is associated with stars located in the red clump. When we compare these mass distributions, we see a deficit of low-mass (1 - 2 M⊙) barium giants. This is probably because low-mass stars reach large radii at the tip of the red giant branch, which may have resulted in an early binary interaction. Among barium giants, the high-mass tail is however dominated by stars with barium indices of less than unity, based on a visual inspection of the barium spectral line; that is, these stars have a very moderate barium line strength. We believe that these stars are not genuine barium giants, but rather bright giants, or supergiants, where the barium lines are strengthened because of a positive luminosity effect. Moreover, contrary to previous claims, we do not see differences between the mass distributions of mild and strong barium giants. Full Table A.1 is only available at the CDS via anonymous ftp to http://cdsarc.u-strasbg.fr (http://130.79.128.5) or via http://cdsarc.u-strasbg.fr/viz-bin/qcat?J/A+A/608/A100

  19. Barium peritonitis following upper gastrointestinal series: A case report

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Su Jin; Hwang, Ji Young; Kim, Yong Jin; Hong, Seong Sook [Soonchunhyang University College of Medicine, Seoul Hospital, Seoul (Korea, Republic of)

    2017-06-15

    We report a rare case of barium peritonitis following an upper gastrointestinal (GI) series and its imaging findings in a 74-year-old female. Barium peritonitis is a rare but life-threatening complication of GI contrast investigation. Therefore, clinical awareness of barium peritonitis as a complication of GI tract contrast investigation would help to prevent such a complication and manage the patients properly.

  20. Lanthanide doped strontium-barium cesium halide scintillators

    Science.gov (United States)

    Bizarri, Gregory; Bourret-Courchesne, Edith; Derenzo, Stephen E.; Borade, Ramesh B.; Gundiah, Gautam; Yan, Zewu; Hanrahan, Stephen M.; Chaudhry, Anurag; Canning, Andrew

    2015-06-09

    The present invention provides for a composition comprising an inorganic scintillator comprising an optionally lanthanide-doped strontium-barium, optionally cesium, halide, useful for detecting nuclear material.

  1. Geology of barium, strontium, and fluorine deposits in Canada

    National Research Council Canada - National Science Library

    Dawson, K. R

    1985-01-01

    In this report the geochemistry and mineralogy of barium, strontium and fluorine are described, occurrences are delineated and areas and geological conditions favourable for additional occurrences are indicated...

  2. Spasmolytic effect of peppermint oil in barium during double-contrast barium enema compared with Buscopan

    Energy Technology Data Exchange (ETDEWEB)

    Asao, T.; Kuwano, H.; Ide, M.; Hirayama, I.; Nakamura, J.-I.; Fujita, K.-I.; Horiuti, R

    2003-04-01

    AIM: To evaluate the efficacy of peppermint oil in barium as a spasmolytic agent during a double-contrast barium enema (DCBE). MATERIALS AND METHODS: A total of 383 DCBEs with positive results from occult blood tests were assessed. Patients were assigned to one of four groups: peppermint in barium (n=91), peppermint in tube (n=90), Buscopan (n=105), or no treatment (n=97). After a screening sigmoidoscopy, the DCBEs were performed using air as a distending gas. In the Buscopan group, the DCBE was performed with an intramuscular injection of 20 mg Buscopan at the start of the examination. Patients in the no-treatment group underwent DCBE without any spasmolytic agent. A peppermint oil preparation (30 ml) was mixed in the barium solution for patients in the peppermint-in-barium group, and the same dose of peppermint oil was included in the enema tube in the peppermint-in-tube group. The presence of spasm on a series of spot films was evaluated without information about the type of spasmolytic agent used. RESULTS: The percentage of patients in the four groups (no treatment, Buscopan, peppermint in tube, and peppermint in barium) with absence of spasm in the entire colon on the series of spot films was 13.4, 38.1, 41.8, and 37.8%, respectively. In the group using peppermint oil or Buscopan, the rate of patients with non-spasm examination was higher than that in no-treatment group (p<0.0005). Peppermint oil had the same spasmolytic effect as the systemic administration of Buscopan in the transverse and descending colon. Peppermint oil had a stronger effect in the caecum and the ascending colon than a Buscopan injection (p<0.005). There was no advantage to placing peppermint oil in the enema tube over mixing it in the barium solution. A total of 157 polyps were found during the DCBE procedures, and no differences were observed in the number of lesions among the four groups. Peppermint oil did not impair image quality. CONCLUSION: Barium solution mixed with peppermint oil

  3. High-concentration protein formulations: How high is high?

    Science.gov (United States)

    Garidel, Patrick; Kuhn, Alexander B; Schäfer, Lars V; Karow-Zwick, Anne R; Blech, Michaela

    2017-10-01

    High-concentration protein formulation (HCPF) is a term that is used to describe protein formulations, mostly monoclonal antibody (mAb) drugs, at high protein concentration. The concentration is rarely defined, with typical ranges varying between 50 and 150mg/ml for mAbs. The term HCPF is meant to include and express specific solution properties of formulations that are prone to appear at high protein concentrations such as high viscosity, high opalescence, phase separation, gel formation or the increased propensity for protein particle formation. Thus the term HCPF can be understood as a descriptor of protein formulations, usually at high protein (monoclonal antibody) concentrations, which have specific solution, stability and colloidal properties that differ from formulations at low protein concentration (e.g. at 10mg/ml). The current paper highlights in brief the development challenges that might occur for high-concentration protein/monoclonal antibody formulations. In particular, the maximum concentration regimes achievable in HCPF remained unclear. Based on geometrical considerations involving packing of monoclonal antibodies in a lattice we map out a maximum concentration range that might be theoretically achievable. Different geometrical assumptions and packing models are compared and their relevance is critically discussed, in particular concerning the influence of the physicochemical properties of the monoclonal antibodies on their solubility, which is neglected in the simple geometrical model. According to our estimates, monoclonal antibody concentration above 500mg/ml will be very challenging to achieve. Our results have implications for setting up realistic drug product development strategies and for preparing convincing drug target product profiles for development. Copyright © 2017 Elsevier B.V. All rights reserved.

  4. Gluten content of barium sulfate suspensions used for barium swallows in patients with celiac disease.

    Science.gov (United States)

    Chiu, Jennifer G; Shin, Yoona; Patel, Priti N; Mangione, Robert A

    2014-01-01

    To determine the availability and accuracy of information provided by hospitals, imaging centers, and manufacturers regarding gluten in barium sulfate suspensions. A total of 105 facilities were contacted via telephone to determine the gluten content of the contrast media used in those facilities. Manufacturers were contacted and their Web sites reviewed to determine the gluten content of their barium products. Thirty-nine percent of the hospitals and 52% of the imaging centers were not aware of the gluten content of the contrast media they used. Twenty-nine-and-a-half percent of the respondents provided the correct gluten content. The manufacturers noted that 5 products were tested and confirmed gluten free, 1 product was not tested but described as gluten free, 1 product's gluten content depended upon its flavor, and 1 product was reported to contain gluten. Clinicians caring for patients with celiac disease or patients who choose to restrict their gluten consumption must ensure that the barium sulfate suspension ingested is gluten free. It can be difficult to determine the gluten content of barium sulfate, as a majority of radiology departments and imaging centers did not know whether the product they use is gluten free. Educating staff members and improving product labeling would benefit the quality of care provided to patients with celiac disease.

  5. Towards operating direct methanol fuel cells with highly concentrated fuel

    Science.gov (United States)

    Zhao, T. S.; Yang, W. W.; Chen, R.; Wu, Q. X.

    A significant advantage of direct methanol fuel cells (DMFCs) is the high specific energy of the liquid fuel, making it particularly suitable for portable and mobile applications. Nevertheless, conventional DMFCs have to be operated with excessively diluted methanol solutions to limit methanol crossover and the detrimental consequences. Operation with diluted methanol solutions significantly reduces the specific energy of the power pack and thereby prevents it from competing with advanced batteries. In view of this fact, there exists a need to improve conventional DMFC system designs, including membrane electrode assemblies and the subsystems for supplying/removing reactants/products, so that both the cell performance and the specific energy can be simultaneously maximized. This article provides a comprehensive review of past efforts on the optimization of DMFC systems that operate with concentrated methanol. Based on the discussion of the key issues associated with transport of the reactants/products, the strategies to manage the supply/removal of the reactants/products in DMFC operating with highly concentrated methanol are identified. With these strategies, the possible approaches to achieving the goal of concentrated fuel operation are then proposed. Past efforts in the management of the reactants/products for implementing each of the approaches are also summarized and reviewed.

  6. Prediction of colloidal stability of high concentration protein formulations.

    Science.gov (United States)

    Garidel, Patrick; Blume, Alfred; Wagner, Michael

    2015-05-01

    A major aspect determining the colloidal properties of proteins in solution is the interaction between them and with surrounding molecules. These interactions can be described by the concentration dependency of the protein diffusivity (kD), as derived by dynamic light scattering and was determined for different solutions of monoclonal antibodies varying in pH, ionic strength and presence/absence of co-solute(s). Concerning colloidal stability, protein solutions of different kD values are evaluated, based on their initial solution opalescence, to assess protein association. The current investigation shows that solution conditions with large kD values, indicating high repulsive protein-protein interactions, show lower initial opalescence, compared to solution conditions with low kD values. Upon applying stirring stress, to assess colloidal stability, the trend is such that, the higher kD values are, the more stable the protein solutions are, as long as the thermodynamic and conformational stability is not impaired. Besides, kD allows ranking of solution conditions for highly concentrated immunoglobulin solutions up to concentrations of ∼200 mg mL(-1) with regard to protein self-association and thus opalescent properties. The present study shows that the protein interaction parameter kD can be used as a surrogate parameter for a qualitative prediction of protein association and, thus, colloidal protein stability.

  7. Coagulation pretreatment of highly concentrated acrylonitrile wastewater from petrochemical plants.

    Science.gov (United States)

    Zheng, Dongju; Qin, Lin; Wang, Tao; Ren, Xiaojing; Zhang, Zhongguo; Li, Jiding

    2014-01-01

    Acrylonitrile (AN) wastewater is a heavily polluted and a likely hazardous liquid that is generated during the production of AN. Several chemical methods for the pretreatment of AN wastewater are available in laboratory scale. However, the harsh reaction conditions and high operational cost make these methods undesirable. Until now, four-effect evaporation is the only pretreatment method used for AN wastewater in industry despite its huge energy consumption and high cost. It is difficult to find an energy-saving pretreatment technique from the perspective of industrial application. In this study, a safe and low-cost coagulation technique was developed for the pretreatment of AN wastewater. Three types of inorganic coagulant and three types of polymer coagulant were investigated for the coagulation treatment of highly concentrated AN wastewater from petrochemical plants. The effects of coagulant type, dosage, and coagulation conditions on the pretreatment efficiency of AN wastewater were investigated. The results show that a combination of inorganic and polymer coagulants is effective for the pretreatment of AN wastewater.

  8. Barium transport in the hot spot region of fluorescent lamps

    Science.gov (United States)

    Sigeneger, F.; Rackow, K.; Uhrlandt, D.; Ehlbeck, J.; Lieder, G.

    2010-09-01

    The transport of barium atoms and ions in the vicinity of the hot spot in fluorescent lamps operating at 25 kHz is investigated by a combined experimental and theoretical approach. By laser-induced fluorescence, the particle densities of barium atoms and ions were measured time-resolved at different distances from the spot centre. In addition, the time-dependent cathode fall voltage was measured using an improved band method. The model combines a kinetic part for the electrons with a fluid part for the barium atoms and ions. Both parts are spatially resolved in spherically symmetric geometry. The space-dependent electron Boltzmann equation yields the electron density and the ionization rate coefficient of barium as functions of the cathode fall voltage. These results are used to solve the time-dependent particle balance equations of barium atoms and ions which include the ionization of barium as gain and loss terms, respectively. Good agreement between the measured and calculated particle densities of barium atoms is obtained. A sensitive dependence of the ionization frequency and of the barium particle densities on the cathode fall voltage was found.

  9. Adverse effects of barium sulfate in the biliary tract.

    Science.gov (United States)

    Walsham, Anna; Larsen, Jörg

    2008-06-01

    Reflux of barium sulfate preparations into the biliary tract is rare, but serious complications have been recorded. To consider the implications of such reflux through enterobiliary stents, the literature was reviewed. A case illustrating such an occurrence is presented. Based upon the limited literature available, barium suspension may be retained in particular circumstances and cause or contribute to stent occlusion.

  10. Comparison of barium and gastrograffin swallow for radiation ...

    African Journals Online (AJOL)

    using radio-opaque contrast is a standard step in treatment planning prior to delivering radiation therapy. Various contrast mediums such as barium, gastrograffin and hexabrix have been used for simulation at different centres. Objective. The purpose of the study was to compare barium and gastrograffin as a useful and ...

  11. 40 CFR 721.10011 - Barium calcium manganese strontium oxide.

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Barium calcium manganese strontium... Specific Chemical Substances § 721.10011 Barium calcium manganese strontium oxide. (a) Chemical substance... manganese strontium oxide (PMN P-00-1124; CAS No. 359427-90-0) is subject to reporting under this section...

  12. Acute barium intoxication following ingestion of ceramic glaze.

    Science.gov (United States)

    Thomas, M.; Bowie, D.; Walker, R.

    1998-01-01

    A case of deliberate overdose of barium sulphide in a psychiatric setting is presented, with resulting flaccid paralysis, malignant arrhythmia, respiratory arrest and severe hypokalaemia, but ultimately with complete recovery. The degree of paralysis appears to be related directly to serum barium levels. The value of early haemodialysis, particularly with respiratory paralysis and hypokalaemia, is emphasised. PMID:10211330

  13. Barium transport in the hot spot region of fluorescent lamps

    Energy Technology Data Exchange (ETDEWEB)

    Sigeneger, F; Rackow, K; Uhrlandt, D; Ehlbeck, J; Lieder, G [INP Greifswald, Felix-Hausdorff-Str. 2, 17489 Greifswald (Germany)

    2010-09-29

    The transport of barium atoms and ions in the vicinity of the hot spot in fluorescent lamps operating at 25 kHz is investigated by a combined experimental and theoretical approach. By laser-induced fluorescence, the particle densities of barium atoms and ions were measured time-resolved at different distances from the spot centre. In addition, the time-dependent cathode fall voltage was measured using an improved band method. The model combines a kinetic part for the electrons with a fluid part for the barium atoms and ions. Both parts are spatially resolved in spherically symmetric geometry. The space-dependent electron Boltzmann equation yields the electron density and the ionization rate coefficient of barium as functions of the cathode fall voltage. These results are used to solve the time-dependent particle balance equations of barium atoms and ions which include the ionization of barium as gain and loss terms, respectively. Good agreement between the measured and calculated particle densities of barium atoms is obtained. A sensitive dependence of the ionization frequency and of the barium particle densities on the cathode fall voltage was found.

  14. Short-cavity squeezing in barium

    Science.gov (United States)

    Hope, D. M.; Bachor, H-A.; Manson, P. J.; Mcclelland, D. E.

    1992-01-01

    Broadband phase sensitive noise and squeezing were experimentally observed in a system of barium atoms interacting with a single mode of a short optical cavity. Squeezing of 13 +/- 3 percent was observed. A maximum possible squeezing of 45 +/- 8 percent could be inferred for out experimental conditions, after correction for measured loss factors. Noise reductions below the quantum limit were found over a range of detection frequencies 60-170 MHz and were best for high cavity transmission and large optical depths. The amount of squeezing observed is consistent with theoretical predictions from a full quantum statistical model of the system.

  15. Effectivness of dexametasone vs. Magnesium sulphate in postoperative analgesia: Dexametasone vs. Magnesium sulphate

    Directory of Open Access Journals (Sweden)

    Dautaj Brikena

    2016-01-01

    Full Text Available Introduction: Preoperative use of additive substances may be very helpful in perioperative acute pain management. Intravenous administration of dexametasone in preoperative period prevents postoperative nausea and vomiting but also provides better pain relief. It is also well known that magnesium sulphate (the NMDA receptor's antagonist by its central mechanism of action may be effective in postoperative pain control. Aim: The purpose of this study was to evaluate the effect of dexametasone and magnesium sulphate on postoperative pain management in patients undergoing abdominal surgery (open cholecystectomy. Methods: Seventy eight patients scheduled for elective surgery (open cholecystectomy were included in this study. This was the prospective cohort randomized placebo- controlled study. A total of 78 patients were randomized into three groups. Each group had twenty six patients. The group D, received dexametasone 0.1 mg/ kg iv 30 minutes before surgery. The group M received magnesium sulphate 3 mg/kg iv 30 minutes before surgery. The third group S was placebo group and patients in this group received saline in the same volume for each patient. For pain control after surgery all patients received tramadol 0.9-1.2 mg/kg and diklophenac 1.76 mg/kg. When necessary (VAS ≥ 7, morphine sulphate in dose 0.15 mg/kg was administred subcutaneously For treatment of emetic episodes metoclopramid 10 mg iv. was used. The patients were observed for intensity of pain measured VAS 0-10, pain relief and satisfaction with therapy, sedation, adverse events, emetic episodes and hemodynamic parameters. Results: There was no difference between groups regarding demographic data (age, gender, body weight, ASA score, comorbidity, duration of surgery and anesthesia and amount of fentanyl received during surgery. In group D 11.54% of patients received additional analgesia (morphine sulphate 0.15 mg/kg sc in the first 4 hours and 27% of patients in the first 24 hours

  16. The Influence of Copper Sulphate on Growth, Morphology and on Anatomy of Vegetative Organs of Triticum Aestivum L

    Directory of Open Access Journals (Sweden)

    Stela Gabriela JELEA

    2017-11-01

    Full Text Available Copper is necessary for the growth and development of plants, but a high concentrations is extremely toxic, resulting in growth inhibition and toxicity symptoms. In this study we investigated the effects of caryopses immersion of Triticum aestivum L, for 24 hours, at different concentrations of copper sulphate. CuSO4 x 5H20 (0.05 g/L - variant V1; 0.1g/L - variant V2; 0.5 g/L - variant V3; 1 g/L - variant V4. The result of metabolic disturbances induced by the treatment of vegetative organs was their growth inhibition in a dose-dependent manner. Our results suggest that caryopses immersion for 24 hours with copper sulphate in a concentration of 0.5 g /l and 1 g /l induce anatomic and morphological changes in vegetative organs.

  17. Highly Concentrated Acetic Acid Poisoning: 400 Cases Reviewed

    Directory of Open Access Journals (Sweden)

    Konstantin Brusin

    2012-12-01

    Full Text Available Background: Caustic substance ingestion is known for causing a wide array of gastrointestinal and systemic complications. In Russia, ingestion of acetic acid is a major problem which annually affects 11.2 per 100,000 individuals. The objective of this study was to report and analyze main complications and outcomes of patients with 70% concentrated acetic acid poisoning. Methods: This was a retrospective study of patients with acetic acid ingestion who were treated at Sverdlovsk Regional Poisoning Treatment Center during 2006 to 2012. GI mucosal injury of each patient was assessed with endoscopy according to Zargar’s scale. Data analysis was performed to analyze the predictors of stricture formation and mortality. Results: A total of 400 patients with median age of 47 yr were included. GI injury grade I was found in 66 cases (16.5%, IIa in 117 (29.3%, IIb in 120 (30%, IIIa in 27 (16.7% and IIIb in 70 (17.5%. 11% of patients developed strictures and overall mortality rate was 21%. Main complications were hemolysis (55%, renal injury (35%, pneumonia (27% and bleeding during the first 3 days (27%. Predictors of mortality were age 60 to 79 years, grade IIIa and IIIb of GI injury, pneumonia, stages “I”, “F” and “L” of kidney damage according to the RIFLE scale and administration of prednisolone. Predictors of stricture formation were ingestion of over 100 mL of acetic acid and grade IIb and IIIa of GI injury. Conclusion: Highly concentrated acetic acid is still frequently ingested in Russia with a high mortality rate. Patients with higher grades of GI injury, pneumonia, renal injury and higher amount of acid ingested should be more carefully monitored as they are more susceptible to develop fatal consequences.          

  18. Barium sulfate aspiration: Severe chemical pneumonia induced by a massive reflux of contrast medium during small bowel barium enema.

    Science.gov (United States)

    Zhang, Lin; Yang, Yi; Zhang, Ji; Zhou, Xiaowei; Dong, Hongmei; Zhou, Yiwu

    2015-08-01

    Barium contrast radiography is a conventional procedure aimed at revealing lesions of the alimentary tract using barium sulfate on X-ray irradiation. Although it is widely used in clinics, adverse effects and complications are observed, such as anaphylaxis, granuloma, fecalithes, abdomen-leaking, embolism, bacterial contamination, and aspiration. We report a case of death due to a massive barium sulfate aspiration resulted from an air-barium double contrast enema radiography. A 25-year-old female patient was hospitalized with symptoms of abdominal distention, nausea, vomiting and diarrhea for three days. A progressive respiratory distress presented only 1h after a small bowel air-barium double contrast enema. The patient died 11h later. The result of autopsy revealed the cause of death to be severe chemical pneumonitis induced by gastric fluid which was aspirated into her lungs. Barium sulfate is generally recognized to be chemically inert for the respiratory system, but a mixture of barium sulfate with gastric contents is fatal. Here we intend to suggest that, when determining the potential cause of death, medical examiners should consider a patient's status quo as well as the possible adverse effects and complications caused by the barium sulfate preparation during gastrointestinal radiography. Copyright © 2015 Elsevier Ireland Ltd. All rights reserved.

  19. Development Trend of the Compressive Strength of an In-Service Sidewall Corroded by Sulphate with a High Concentration of Ca2+

    Directory of Open Access Journals (Sweden)

    Wei He

    2016-01-01

    Full Text Available At the bedrock section of the auxiliary shaft of the Tong-ting coal mine, the sidewall has varying degradation degrees in different parts. The part on which water flowed is barely corroded, whereas the moist part near the pouring joints is seriously corroded. We first studied the mechanism of this phenomenon by chromatography, X-ray diffraction, and energy-dispersive X-ray spectroscopy. We then used simplified models built by particle flow code software (i.e., particle flow code in three dimensions, PFC3D to analyse how increasing degradation depth affects compressive strength and failure patterns. The results were as follows. (1 Gypsum and calcite in corrosive water were supersaturated. The part on which water flowed was protected by the crystallized precipitation on the concrete. By contrast, the degradation of the part where water flowed through pouring joints was aggravated by internal crystallization and dissolution. (2 PFC3D numerical simulation indicated that decreases in vertical ultimate stress were strongly linearly correlated with degradation depth. As for the −355.5 m damaged part, reinforcement should be conducted before degradation depth reaches 250 mm. (3 No obvious signs were observed prior to the failure of the corroded sidewall. Therefore, the development of degradation depth should be monitored before degradation parts are reinforced.

  20. The Novel Formation of Barium Titanate Nanodendrites

    Directory of Open Access Journals (Sweden)

    Chien-Jung Huang

    2014-01-01

    Full Text Available The barium titanate (BaTiO3 nanoparticles with novel dendrite-like structures have been successfully fabricated via a simple coprecipitation method, the so-called BaTiO3 nanodendrites (BTNDs. This method was remarkable, fast, simple, and scalable. The growth solution is prepared by barium chloride (BaCl2, titanium tetrachloride (TiCl4, and oxalic acid. The shape and size of BaTiO3 depend on the amount of added BaCl2 solvent. To investigate the influence of amount of BaCl2 on BTNDs, the amount of BaCl2 was varied in the range from 3 to 6 mL. The role of BaCl2 is found to have remarkable influence on the morphology, crystallite size, and formation of dendrite-like structures. The thickness and length of the central stem of BTND were ~300 nm and ~20 μm, respectively. The branchings were found to occur at irregular intervals along the main stem. Besides, the formation mechanism of BTND is proposed and discussed.

  1. Radium and barium removal through blending hydraulic fracturing fluids with acid mine drainage.

    Science.gov (United States)

    Kondash, Andrew J; Warner, Nathaniel R; Lahav, Ori; Vengosh, Avner

    2014-01-21

    Wastewaters generated during hydraulic fracturing of the Marcellus Shale typically contain high concentrations of salts, naturally occurring radioactive material (NORM), and metals, such as barium, that pose environmental and public health risks upon inadequate treatment and disposal. In addition, fresh water scarcity in dry regions or during periods of drought could limit shale gas development. This paper explores the possibility of using alternative water sources and their impact on NORM levels through blending acid mine drainage (AMD) effluent with recycled hydraulic fracturing flowback fluids (HFFFs). We conducted a series of laboratory experiments in which the chemistry and NORM of different mix proportions of AMD and HFFF were examined after reacting for 48 h. The experimental data combined with geochemical modeling and X-ray diffraction analysis suggest that several ions, including sulfate, iron, barium, strontium, and a large portion of radium (60-100%), precipitated into newly formed solids composed mainly of Sr barite within the first ∼ 10 h of mixing. The results imply that blending AMD and HFFF could be an effective management practice for both remediation of the high NORM in the Marcellus HFFF wastewater and beneficial utilization of AMD that is currently contaminating waterways in northeastern U.S.A.

  2. Analysis of proteoglycans derived sulphated disaccharides by liquid chromatography/mass spectrometry

    NARCIS (Netherlands)

    Barroso, B.; Didraga, Mihaela Alina; Bischoff, Rainer

    2005-01-01

    A method has been developed for the identification and quantitative determination of sulphated disaccharides derived from chondroitin sulphate (CS) and dermatan sulphate (DS) chains attached to proteoglycans (PGs). After digestion with Chondroitinase ABC, the pool of disaccharides can be directly

  3. The ecology and biotechnology of sulphate-reducing bacteria

    NARCIS (Netherlands)

    Muyzer, G.; Stams, A.J.M.

    2008-01-01

    Sulphate-reducing bacteria (SRB) are anaerobic microorganisms that use sulphate as a terminal electron acceptor in, for example, the degradation of organic compounds. They are ubiquitous in anoxic habitats, where they have an important role in both the sulphur and carbon cycles. SRB can cause a

  4. Anodically generated manganese (III) sulphate for the oxidation of ...

    Indian Academy of Sciences (India)

    Anodically generated manganese(III) sulphate for the oxidation of dipeptides in aqueous sulphuric acid medium: A kinetic study. M N Kumara D Channe ... The effects of varying the dielectric constant of the medium and addition of anions such as sulphate, chloride and perchlorate were studied. The activation parameters ...

  5. New Sulphated Flavonoids from Wissadula periplocifolia (L.) C. Presl (Malvaceae).

    Science.gov (United States)

    Teles, Yanna C F; Horta, Carolina Campolina Rebello; Agra, Maria de Fátima; Siheri, Weam; Boyd, Marie; Igoli, John O; Gray, Alexander I; de Souza, Maria de Fátima Vanderlei

    2015-11-09

    Wissadula periplocifolia (L.) C. Presl (Malvaceae) is commonly used in Brazil to treat bee stings and as an antiseptic. The antioxidant properties of its extracts have been previously demonstrated, thus justifying a phytochemical investigation for its bioactive phenolic constituents. This has yielded five new sulphated flavonoids: 8-O-sulphate isoscutellarein (yannin) (1a); 4'-O-methyl-7-O-sulphate isoscutellarein (beltraonin) (1b); 7-O-sulphate acacetin (wissadulin) (2a); 4'-O-methyl-8-O-sulphate isoscutellarein (caicoine) (2b) and 3'-O-methyl-8-O-sulphate hypolaetin (pedroin) (3b) along with the known flavonoids 7,4'-di-O-methyl-8-O-sulphate isoscutellarein (4), acacetin, apigenin, isoscutellarein, 4'-O-methyl isoscutellarein, 7,4'-di-O-methylisoscutellarein, astragalin and tiliroside. The compounds were isolated by column chromatography and identified by NMR (¹H, (13)C, HMQC, HMBC and COSY) and LC-HRMS. A cell based assay was carried out to evaluate the preliminary cytotoxic properties of the flavonoids against UVW glioma and PC-3M prostate cancer cells as well as non-tumour cell lines. The obtained results showed that acacetin, tiliroside, a mixture of acacetin + apigenin and the sulphated flavonoids 2a + 2b exhibited inhibitory activity against at least one of the cell lines tested. Among the tested flavonoids acacetin and tiliroside showed lower IC50 values, presenting promising antitumor effects.

  6. Development of a kinetic model for biological sulphate reduction ...

    African Journals Online (AJOL)

    The Rhodes BioSUREÆÊ Process is a low-cost active treatment system for acid mine drainage (AMD) waters. Central to this process is biological sulphate reduction (BSR) using primary sewage sludge (PSS) as the electron donor and organic carbon source, with the concomitant reduction of sulphate to sulphide and ...

  7. New Sulphated Flavonoids from Wissadula periplocifolia (L. C. Presl (Malvaceae

    Directory of Open Access Journals (Sweden)

    Yanna C. F. Teles

    2015-11-01

    Full Text Available Wissadula periplocifolia (L. C. Presl (Malvaceae is commonly used in Brazil to treat bee stings and as an antiseptic. The antioxidant properties of its extracts have been previously demonstrated, thus justifying a phytochemical investigation for its bioactive phenolic constituents. This has yielded five new sulphated flavonoids: 8-O-sulphate isoscutellarein (yannin (1a; 4′-O-methyl-7-O-sulphate isoscutellarein (beltraonin (1b; 7-O-sulphate acacetin (wissadulin (2a; 4′-O-methyl-8-O-sulphate isoscutellarein (caicoine (2b and 3′-O-methyl-8-O-sulphate hypolaetin (pedroin (3b along with the known flavonoids 7,4′-di-O-methyl-8-O-sulphate isoscutellarein (4, acacetin, apigenin, isoscutellarein, 4´-O-methyl isoscutellarein, 7,4′-di-O-methylisoscutellarein, astragalin and tiliroside. The compounds were isolated by column chromatography and identified by NMR (1H, 13C, HMQC, HMBC and COSY and LC-HRMS. A cell based assay was carried out to evaluate the preliminary cytotoxic properties of the flavonoids against UVW glioma and PC-3M prostate cancer cells as well as non-tumour cell lines. The obtained results showed that acacetin, tiliroside, a mixture of acacetin + apigenin and the sulphated flavonoids 2a + 2b exhibited inhibitory activity against at least one of the cell lines tested. Among the tested flavonoids acacetin and tiliroside showed lower IC50 values, presenting promising antitumor effects.

  8. Differential responses of freshwater wetland soils to sulphate pollution

    NARCIS (Netherlands)

    Lamers, L.P.M.; Dolle, ten G.E.; Berg, van den S.T.G.; Delft, van S.P.J.; Roelofs, J.G.M.

    2001-01-01

    Sulphate (SO42-) reduction rates are generally low in freshwater wetlands and are regulated by the scarce availability of the ion. Increased concentrations of this electron acceptor due to sulphur (S) pollution of groundwater and surface water may, however, lead to high sulphate reduction rates now

  9. Effects of dietary ammonium sulphate (AS) on the performance and ...

    African Journals Online (AJOL)

    Two experiments were designed to investigate the response of broilers to dietary inclusion of ammonium sulphate. In experiment 1, day old chicks were fed diets with 0,1,2 or 3 % ammonium sulphate (AS) during the starter phase (0 –4 weeks). In experiment 2, broilers chicks were raised on a standard diet from 0 – 4 weeks ...

  10. Modification of chromate toxicity by sulphate in duckweeds (Lemnaceae).

    Science.gov (United States)

    Appenroth, Klaus-J; Luther, Alexandra; Jetschke, Gottfried; Gabrys, Halina

    2008-09-17

    Two duckweed species, Spirodela polyrhiza and Lemna minor, were used to measure the toxicity of chromate (100 microM) at three levels of sulphate (13 microM, low sulphate=LS; 410 microM, normal sulphate=NS; 10,000 microM, high sulphate=HS). Growth rates calculated on the basis of dry weight, chlorophyll and carotenoid content were all reduced by chromate. This inhibition was the strongest under LS conditions and the weakest under HS conditions. Thus, sulphate decreases chromate toxicity-which conforms with its influence on chromate uptake reported previously (Kaszycki, P., Gabrys, H., Appenroth, K.-J., Jaglarz, A., Sedziwy, S., Walczak, T., Koloczek, H., 2005. Exogenously applied sulphate as a tool to investigate transport and reduction of chromate in the duckweed Spirodela polyrhiza. Plant Cell Environ. 28, 260-269). The three levels of sulphate were also applied during pre-cultivation of both species for 2 weeks and the consequences for chromate toxicity were tested thereafter. When S. polyrhiza was pre-cultivated in NS medium, the growth inhibition by chromate was approximately 80% of the control (no chromate) in the subsequently applied LS medium, and approximately 50% in HS. L. minor showed similar relationships but a lower overall chromate sensitivity. In comparison to the plants pre-treated in NS medium, those pre-treated in LS were more sensitive whereas those pre-treated in HS were less sensitive toward chromate. The present data demonstrate that chromate is taken up into cells of the two duckweed species by sulphate transporter(s). The rather weak influence of sulphate on chromate toxicity indicates that chromate binds to the transporters much stronger than sulphate. Moreover, the relative effects of sulphate on the chromate toxicity remain very similar regardless of pre-treatment. This confirms the conclusion from uptake experiments that pre-treatment with different levels of sulphate changes the number of sulphate transporters but their affinity remains

  11. Sulphated glycosaminoglycans and proteoglycans in the developing vertebral column of juvenile Atlantic salmon (Salmo salar)

    OpenAIRE

    Hannesson, Kirsten O.; Ytteborg, Elisabeth; Takle, Harald; Enersen, Grethe; B?verfjord, Grete; Mona E Pedersen

    2015-01-01

    In the present study, the distribution of sulphated glycosaminoglycans (GAGs) in the developing vertebral column of Atlantic salmon (Salmo salar) at 700, 900, 1100 and 1400?d? was examined by light microscopy. The mineralization pattern was outlined by Alizarin red S and soft structures by Alcian blue. The temporal and spatial distribution patterns of different types of GAGs: chondroitin-4-sulphate/dermatan sulphate, chondroitin-6-sulphate, chondroitin-0-sulphate and keratan sulphate were add...

  12. Sulphate rocks as an arena for karst development

    Directory of Open Access Journals (Sweden)

    Andrejchuk V.

    1996-01-01

    Full Text Available The rocks in which karst systems develop are most commonly composed of carbonate sulphate and chloride minerals. The sulphate minerals are quite numerous, but only gypsum and anhydrite form extensive masses in sedimentary sequences. Other minerals, which represent sulphates of K, Mg and Na, normally occur as minor beds (0.1-5.0 m, or as inclusions associated with chloride rocks. However some minerals precipitated in salt-generating basins, such as mirabilite and glauberite (typically formed in the Kara-Bogaz-Gol Gulf, salt lakes of Siberia and in China, form sequences up to 5-10 m thick where karst may develop. Due to the very high solubility of Na -sulphates, karst processes and features occurring in these rocks resemble salt karst. Thus, the term sulphate karst, although not strictly correct, is used mainly to indicate karst developed in gypsum and anhydrite.

  13. Do all barium stars have a white dwarf companion?

    Science.gov (United States)

    Dominy, J. F.; Lambert, D. L.

    1983-01-01

    International Ultraviolet Explorer short-wavelength, low-dispersion spectra were analyzed for four barium, two mild barium, and one R-type carbon star in order to test the hypothesis that the barium and related giants are produced by mass transfer from a companion now present as a white dwarf. An earlier tentative identification of a white dwarf companion to the mild barium star Zeta Cyg is confirmed. For the other stars, no ultraviolet excess attributable to a white dwarf is seen. Limits are set on the bolometric magnitude and age of a possible white dwarf companion. Since the barium stars do not have obvious progenitors among main-sequence and subgiant stars, mass transfer must be presumed to occur when the mass-gaining star is already on the giant branch. This restriction, and the white dwarf's minimum age, which is greater than 8 x 10 to the 8th yr, determined for several stars, effectively eliminates the hypothesis that mass transfer from an asymptotic giant branch star creates a barium star. Speculations are presented on alternative methods of producing a barium star in a binary system.

  14. Radiography and image-intensified fluoroscopy of barium passage through the gastrointestinal tract in six healthy Amazon parrots (Amazona aestiva).

    Science.gov (United States)

    Vink-Nooteboom, Mariette; Lumeij, J T; Wolvekamp, W T C

    2003-01-01

    Gastrointestinal contrast studies were performed in six clinically healthy blue-fronted Amazon parrots (Amazona aestiva) using radiography and image-intensified fluoroscopy. During examination, the birds were confined in a perspex cage. The quality of the lateral radiographs was adequate for assessment of the contrast medium-filled gastrointestinal tract. Thirty minutes after administration of 20 mL/kg of a 25% barium sulphate suspension directly in the crop, in all birds the ventriculus was totally outlined by barium. After 60 min, the small intestine was filled in five of six birds. After 180 min, the crop was empty in all birds. The barium-outlined ventriculus had differences in shape on radiographs of individual birds and also between birds. The colon and cloaca had further filling after 120 to 300 min. With image-intensified fluoroscopy, gastrointestinal motility was evaluated. Contractions of the crop were seen, and boluses of contrast medium passing through the esophagus toward the proventriculus were easily identified. Proventricular contractions were rarely noted, but ventriculus motility was present and clearly defined. The ventriculus had a mean of 3.7 contraction cycles/min. In the duodenum and small intestine, rapid antegrade and retrograde peristaltic movements in combination with segmental contractions were seen. In the colon, occasionally very slow peristaltic activity, mainly of segmental nature, was present. During the examinations, no defeacation was recorded. Confinement in a small perspex cage provides an adequate and handy radiological set-up for evaluation of gastrointestinal passage and motility in birds, minimizing the influences of stress and anesthesia.

  15. Removal heavy metals and sulphate from waste waters by sulphate-reducing bacteria

    Directory of Open Access Journals (Sweden)

    Kušnierová Mária

    2000-09-01

    Full Text Available This article is devoted to the process of bacterial sulphate reduction, which is used to removal of heavy metals and sulphate ions from waste waters.The life of animals and plants depends on the existence of microscopic organisms – microorganisms (MO, which play an important role in cycle changes of biogenic elements on the earth. The sulphur cycle in the nature is considered as one of the oldest and most significant biological systems (Fig. 1. The sulphate-reducing bacteria (SRB miss the assimilatory part of the cycle and produce sulphides. The microbial population of this dissimilatory part is called “sulfuretum”. The SRB can be found in anaerobic mud and sediments of freshwater, thermal or non-thermal sulphur springs, mining waters from sulphide deposits, oil deposits, sea and ocean beds, and in the gastrointestinal tract of man and animals. The SRB represent a group of chemoorganotrophic, strictly anaerobic and gramnegative bacteria, which exhibit a great morphological and physiological diversity. Despite of their considerable morphological variety, they have one property in common, which is the ability to utilise preferentially sulphates (occasionally sulphites, thiosulphates, tetrathionates as electron acceptors, which are reduced to sulphides, during anaerobic respiration. The electron donors in these processes are simple organic compounds as lactate, malate, etc.,(heterotrophically reduction or gaseous hydrogen (autotrophically reduction. SRB can produce a considerable amount of hydrogen sulphide, which reacts easily in aqueous solution with the cations of heavy metals, forming metal sulphides that have low solubility. The bacterial sulphate reduction can be used for the treatment of acid mine drainage waters, which is considered to be the major problem associated with mining activities.In order to remove heavy metals from waste waters, e.g., from galvanizing plants, mine waters (Smolnik, Šobov locality and metallurgic plants (works

  16. Studies on growth and nucleation kinetics of cadmium thiourea sulphate and magnesium cadmium thiourea sulphate

    Energy Technology Data Exchange (ETDEWEB)

    Daniel, Mekala [Quaid-e-Milleth College, Chennai 600002 (India)], E-mail: mekaladaniel@rediffmail.com; Malliga, M. Jeyarani [Bharathi Women College, Chennai 600108 (India); Sankar, R. [Kings Engineering College, Irungatukottai, Sriperumbudhur, Chennai 602105 (India); Jayaraman, D. [Presidency College, Chennai 600 004 (India)

    2009-03-15

    Semiorganic materials, in general possess high non-linear coefficient and mechanical strength which will be more applicable for device fabrication. Cadmium thiourea sulphate (CTS) and magnesium cadmium thiourea sulphate (MCTS) are better semiorganic materials which find applications in the field of optoelectronics. Single crystals of CTS and MCTS have been successfully grown from aqueous solution by slow evaporation technique using predetermined solubility data. The basic growth parameters of the crystal nuclei of the grown crystals of CTS and MCTS were evaluated based on the classical theory of homogeneous nucleation. The classical nucleation theory makes use of capillarity approximation which has certain limitations. A correction has to be applied for it and the classical nucleation theory has been suitably modified in order to calculate the critical nucleus parameters.

  17. Metallurgical Properties and Phase Transformations of Barium-Strontium Modifier

    Science.gov (United States)

    Platonov, M. A.; Sulimova, I. S.; Rozhikhina, I. D.; Dmitrienko, V. I.; Horoshun, G. V.

    2016-04-01

    Metallurgical properties and phase transformations of barium-strontium modifier were tested in laboratory conditions resembling steel processing in furnace and ladle. When heating barium-strontium modifier start of melting, kinetics of decomposition, phase and structure transformation were studied. The concentrate under consideration has been revealed to be a complex mineral compound containing barytocalcite, calcite, calciostrontianite, dolomite and siderite. The reaction kinetics of decomposing mineral components of barium-strontium modifier to oxides does not considerably affect slag formation in conditions of out-of-furnace steel processing.

  18. Reducing conditions on barium absorption in rice plants cultured in BaSO4-enriched soil

    OpenAIRE

    Magalhães,Marcio Osvaldo Lima; Amaral Sobrinho,Nelson Moura Brasil do; Zonta, Everaldo; Becerra, Alfredo Tolón; Lastra-Bravo, Xavier Bolívar; Coutinho, Izabella Bezerra

    2014-01-01

    To evaluate the possible solubilization of barium sulfate in soils under reducing conditions and its effects on barium bioavailability, an Oryza sativa pot trial was established. Increasing barium doses and two redox potential conditions were evaluated. The geochemical fractionation data demonstrated that reducing conditions led to an increase in the levels of more labile forms of barium and a reduction in more stable forms. Furthermore, higher doses of barium were found to have a negative im...

  19. Solar Twins and the Barium Puzzle

    Energy Technology Data Exchange (ETDEWEB)

    Reddy, Arumalla B. S.; Lambert, David L., E-mail: bala@astro.as.utexas.edu [W.J. McDonald Observatory and Department of Astronomy, The University of Texas at Austin, Austin, TX 78712-1205 (United States)

    2017-08-20

    Several abundance analyses of Galactic open clusters (OCs) have shown a tendency for Ba but not for other heavy elements (La−Sm) to increase sharply with decreasing age such that Ba was claimed to reach [Ba/Fe] ≃ +0.6 in the youngest clusters (ages < 100 Myr) rising from [Ba/Fe] = 0.00 dex in solar-age clusters. Within the formulation of the s -process, the difficulty to replicate higher Ba abundance and normal La−Sm abundances in young clusters is known as the barium puzzle. Here, we investigate the barium puzzle using extremely high-resolution and high signal-to-noise spectra of 24 solar twins and measured the heavy elements Ba, La, Ce, Nd, and Sm with a precision of 0.03 dex. We demonstrate that the enhanced Ba ii relative to La−Sm seen among solar twins, stellar associations, and OCs at young ages (<100 Myr) is unrelated to aspects of stellar nucleosynthesis but has resulted from overestimation of Ba by standard methods of LTE abundance analysis in which the microturbulence derived from the Fe lines formed deep in the photosphere is insufficient to represent the true line broadening imposed on Ba ii lines by the upper photospheric layers from where the Ba ii lines emerge. Because the young stars have relatively active photospheres, Ba overabundances most likely result from the adoption of a too low value of microturbulence in the spectrum synthesis of the strong Ba ii lines but the change of microturbulence in the upper photosphere has only a minor affect on La−Sm abundances measured from the weak lines.

  20. Morphological and FTIR Studies of Barium Oxalate Single Crystals

    Directory of Open Access Journals (Sweden)

    Shedam M. R.

    2017-12-01

    Full Text Available The conditions for the gel growth of barium oxalate single crystals in silica gels were studied in this paper. We describe the growth mechanism, effect concentration of feed solution, interchanging of the reactants, the effect of temperature and detailed study of microstructures of barium oxalate single crystals. At higher concentration of feed solution dense fibers were observed. With interchanged feed solution precipitate and spherulites have been obtained. The effect of temperature on growth barium oxalate crystals showed that there was a decrease in nucleation density at higher temperature. The crystals growth were observed under the electron microscope which revealed that the crystal have needle and spherulites structures. We also report the FTIR studies of barium oxalate crystals.

  1. Coastal barium cycling at the West Antarctic Peninsula

    Science.gov (United States)

    Pyle, K. M.; Hendry, K. R.; Sherrell, R. M.; Meredith, M. P.; Venables, H.; Lagerström, M.; Morte-Ródenas, A.

    2017-05-01

    Barium cycling in the ocean is associated with a number of processes, including the production and recycling of organic matter, freshwater fluxes, and phenomena that affect alkalinity. As a result, the biogeochemical cycle of barium offers insights into past and present oceanic conditions, with barium currently used in various forms as a palaeoproxy for components of organic and inorganic carbon storage, and as a quasi-conservative water mass tracer. However, the nature of the oceanic barium cycle is not fully understood, particularly in cases where multiple processes may be interacting simultaneously with the dissolved and particulate barium pools. This is particularly the case in coastal polar regions such as the West Antarctic Peninsula, where biological drawdown and remineralisation occur in tandem with sea ice formation and melting, glacial meltwater input, and potential fluxes from shelf sediments. Here, we use a high-precision dataset of dissolved barium (Bad) from a grid of stations adjacent to the West Antarctic Peninsula in conjunction with silicic acid (Si(OH)4), the oxygen isotope composition of water, and salinity measurements, to determine the relative control of various coastal processes on the barium cycle throughout the water column. There is a strong correlation between Bad and Si(OH)4 present in deeper samples, but nevertheless persists significantly in surface waters. This indicates that the link between biogenic opal and barium is not solely due to barite precipitation and dissolution at depth, but is supplemented by an association between Bad and diatom tests in surface waters, possibly due to barite formation within diatom-dominated phytodetritus present in the photic zone. Sea-ice meltwater appears to exert a significant secondary control on barium concentrations, likely due to non-conservative biotic or abiotic processes acting as a sink for Bad within the sea ice itself, or sea-ice meltwater stimulating non-siliceous productivity that acts

  2. A search for technetium (Tc II) in barium stars

    Science.gov (United States)

    Little-Marenin, Irene R.; Little, Stephen J.

    1987-01-01

    The authors searched without success for the lines of Tc II at 2647.02, 2610.00 and 2543.24 A in IUE spectra of the barium stars HR 5058, Omicron Vir, and Zeta Cap. The lack of Tc II implies that the observed s-process enhancements were produced more than half a million years ago and supports the suggestion that the spectral peculiarities of barium stars are probably related to the binary nature of the stars.

  3. The Overview of The Electrical Properties of Barium Titanate

    OpenAIRE

    Burcu Ertuğ

    2013-01-01

    The perovskite family includes many titanates used in various electroceramic applications, for example, electronic, electro-optical, and electromechanical applications of ceramics. Barium titanate, perovskite structure, is a common ferroelectric material with a high dielectric constant, widely utilized to manufacture electronic components such as mutilayer capacitors (MLCs), PTC thermistors, piezoelectric transducers, and a variety of electro-optic devices. Pure barium titanate is an insulato...

  4. Magnesium sulphate for preventing preterm birth in threatened preterm labour.

    Science.gov (United States)

    Crowther, Caroline A; Brown, Julie; McKinlay, Christopher J D; Middleton, Philippa

    2014-08-15

    Magnesium sulphate has been used in some settings as a tocolytic agent to inhibit uterine activity in women in preterm labour with the aim of preventing preterm birth. To assess the effects of magnesium sulphate therapy given to women in threatened preterm labour with the aim of preventing preterm birth and its sequelae. We searched the Cochrane Pregnancy and Childbirth Group's Trials Register (last searched 31 January 2014). Randomised controlled trials of magnesium sulphate as the only tocolytic, administered by any route, compared with either placebo, no treatment or alternative tocolytic therapy (not magnesium sulphate) to women considered to be in preterm labour. At least two review authors assessed trial eligibility and risk of bias and undertook data extraction independently. The 37 included trials (total of 3571 women and over 3600 babies) were generally of moderate to high risk of bias. Antenatal magnesium sulphate was compared with either placebo, no treatment, or a range of alternative tocolytic agents.For the primary outcome of giving birth within 48 hours after trial entry, no significant differences were seen between women who received magnesium sulphate and women who did not (whether placebo/no alternative tocolytic drug, betamimetics, calcium channel blockers, cox inhibitors, prostaglandin inhibitors, or human chorionic gonadotropin) (19 trials, 1913 women). Similarly for the primary outcome of serious infant outcome, there were no significant differences between the infants exposed to magnesium sulphate and those not (whether placebo/no alternative tocolytic drug, betamimetics, calcium channel blockers, cox inhibitors, prostaglandin inhibitors, human chorionic gonadotropin or various tocolytic drugs) (18 trials; 2187 babies). No trials reported the outcome of extremely preterm birth. In the seven trials that reported serious maternal outcomes, no events were recorded.In the group treated with magnesium sulphate compared with women receiving

  5. Short communication: Use of calcium sulphate dihydrate as an ...

    African Journals Online (AJOL)

    flocculant alternative to the conventional use of aluminium sulphate in the primary treatment of wastewater was evaluated using a jar test apparatus. Samples from the State Water Commission (CEA) in Queretaro, Mexico, were collected for the ...

  6. Kinetic and Thermodynamic Studies on Adsorption of Sulphate from ...

    African Journals Online (AJOL)

    DELL USER

    Magnetite nanoparticles, activated Carbon and their composites were ... Keywords: Sulphate, Adsorption, Magnetite, Composites, Isotherm, Thermodynamic ...... doi:10.1016/j.polymer.2014.08.040. (2014). 42. ... Journal of Colloid and Interface.

  7. INDUSTRIAL WASTED WATER TREATMENT WITH ALUMINIUM SULPHATE COAGULANT

    Directory of Open Access Journals (Sweden)

    Khromysheva О.О.

    2011-10-01

    Full Text Available Physical and chemical regularities of coagulant treatment of sewage of Open Joint-Stock Company «GidrosylaMZTG» from heavy metals, chlorides and sulfates by with aluminum sulphate are studied.

  8. Effects of agmatine sulphate on facial nerve injuries.

    Science.gov (United States)

    Surmelioglu, O; Sencar, L; Ozdemir, S; Tarkan, O; Dagkiran, M; Surmelioglu, N; Tuncer, U; Polat, S

    2017-03-01

    To evaluate the effect of agmatine sulphate on facial nerve regeneration after facial nerve injury using electron and light microscopy. The study was performed on 30 male Wistar albino rats split into: a control group, a sham-treated group, a study control group, an anastomosis group, and an anastomosis plus agmatine sulphate treatment group. The mandibular branch of the facial nerve was dissected, and a piece was removed for histological and electron microscopic examination. Regeneration was better in the anastomosis group than in the study control group. However, the best regeneration findings were seen in the agmatine sulphate treatment group. There was a significant difference between the agmatine group and the others in terms of median axon numbers (p < 0.004) and diameters (p < 0.004). Agmatine sulphate treatment with anastomosis in traumatic facial paralysis may enhance nerve regeneration.

  9. The efficacy of steroids for postoperative persistent inflammatory reaction in a patient with barium peritonitis: A case report

    Directory of Open Access Journals (Sweden)

    Hirofumi Kojima

    2017-01-01

    Conclusion: Residual barium in the intraperitoneal cavity causes persistent inflammatory reaction in patients with barium peritonitis. The use of steroids is effective for postoperative persistent inflammation due to the residual barium.

  10. Low marine sulphate and protracted oxygenation of the Proterozoic biosphere.

    Science.gov (United States)

    Kah, Linda C; Lyons, Timothy W; Frank, Tracy D

    2004-10-14

    Progressive oxygenation of the Earth's early biosphere is thought to have resulted in increased sulphide oxidation during continental weathering, leading to a corresponding increase in marine sulphate concentration. Accurate reconstruction of marine sulphate reservoir size is therefore important for interpreting the oxygenation history of early Earth environments. Few data, however, specifically constrain how sulphate concentrations may have changed during the Proterozoic era (2.5-0.54 Gyr ago). Prior to 2.2 Gyr ago, when oxygen began to accumulate in the Earth's atmosphere, sulphate concentrations are inferred to have been Proterozoic. Our calculations indicate sulphate levels between 1.5 and 4.5 mM, or 5-15 per cent of modern values, for more than 1 Gyr after initial oxygenation of the Earth's biosphere. Persistence of low oceanic sulphate demonstrates the protracted nature of Earth's oxygenation. It links biospheric evolution to temporal patterns in the depositional behaviour of marine iron- and sulphur-bearing minerals, biological cycling of redox-sensitive elements and availability of trace metals essential to eukaryotic development.

  11. Folic acid improve developmental toxicity induced by aluminum sulphates.

    Science.gov (United States)

    Yassa, Heba A; George, Safaa M; Mohamed, Heba K

    2017-03-01

    Aluminum sulphate has a significant toxic effects for humans. Aluminum is one of the most abundant metal on the Earth crust. The purpose of this study is to evaluate the effects of short term exposure to aluminum sulphate on the bone development of the fetuses in rats, and if folic acid has a protective role upon that effects or not. Forty female rats were used, ten per group, GI served as negative control (receive nothing except normal feeding and water), GII served as positive control (receive water by gastric gavage), GIII treated with aluminum sulphate orally by gastric gavage and GIV treated with aluminum sulphate with folic acid. Mating occurred and known by presence of vaginal plug in the female rats. Rats were killed on day 18 of gestation. The female rats weight were significantly reduced in the treated group if compared with the control group (p>0.001), all parameters of the fetuses, fetal weight, malformation and the crown rump length reduced significantly p value were Folic acid gave a protective role for all the hazardous effects of aluminum sulphate and prove the diameters measured and also the histopathological effects. Aluminum sulphate can produce hazardous effects on bone of the fetuses, which may affect the life style of these fetuses later on. Folic acid might give a protective role and so should be given to females who tried to conceive. Copyright © 2017 Elsevier B.V. All rights reserved.

  12. Demonstration of immunogenic keratan sulphate in commercial chondroitin 6-sulphate from shark cartilage. Implications for ELISA assays

    DEFF Research Database (Denmark)

    Møller, H J; Møller-Pedersen, T; Damsgaard, T E

    1995-01-01

    The prototype monoclonal keratan sulphate (KS) antibody 5D4 that is widely used for detection of KS in tissues and biological fluids reacts strongly with commercial low grade shark cartilage chondroitin 6-sulphate. Characterization of the immunogenic material by chondroitinase ABC digestion, ELISA...... inhibition studies, immunoblotting and HPLC analyses confirmed the presence of substantial amounts of KS, probably as a large proteoglycan (> 120 kDa). Commercial and heterogenic glycosaminoglycan preparations therefore must be used with great caution in immunological analyses. On the other hand the shark...... cartilage chondroitin 6-sulphate is an easy accessible source of immunogenic KS that can be used as a reference standard and as coating antigen in KS-ELISAs. The concentration of immunogenic KS in synovial fluid measured with an ELISA based solely on reagents of shark cartilage chondroitin 6-sulphate...

  13. Synthesis and Characterization of Barium Hexafluoridoosmates

    Directory of Open Access Journals (Sweden)

    Sergei I. Ivlev

    2017-12-01

    Full Text Available Two barium hexafluoridoosmates, Ba(OsF62 and BaOsF6, were synthesized and were characterized for the first time using X-ray powder and single crystal diffraction, IR spectroscopy, as well as NMR spectroscopy in anhydrous hydrogen fluoride. Ba(OsF62 crystallizes in the space group type P21/c with the cell parameters a = 6.4599(4, b = 10.7931(8, c = 14.7476(10 Å, β = 115.195(5°, V = 930.42(12 Å3, Z = 4 at 293 K. BaOsF6 crystallizes in the space group type R 3 ¯ with the cell parameters a = 7.3286(10, c = 7.2658(15 Å, V = 337.95(12 Å3, Z = 3 at 100 K. Additionally, we have obtained the compounds Ba(OsF62∙3BrF3, Ba(OsF62∙HF, Ba(OsF62∙6H2O from the respective solvents, and Ba(OsF62.

  14. Barium Levels in Soils and Centella asiatica

    Science.gov (United States)

    Ong, Ghim Hock; Yap, Chee Kong; Mahmood, Maziah; Tan, Soon Guan; Hamzah, Suhaimi

    2013-01-01

    In this study, Centella asiatica and surface soils were collected from 12 sampling sites in Peninsular Malaysia, and the barium (Ba) concentrations were determined. The Ba concentration [μg/g dry weight (dw)] was 63.72 to 382.01 μg/g in soils while in C. asiatica, Ba concentrations ranged from 5.05 to 21.88 μg/g for roots, 3.31 to 11.22 μg/g for leaves and 2.37 to 6.14 μg/g for stems. In C. asiatica, Ba accumulation was found to be the highest in roots followed by leaves and stems. The correlation coefficients (r) of Ba between plants and soils were found to be significantly positively correlated, with the highest correlation being between roots-soils (r=0.922, pplant is found. Three weeks after back transplantation to clean soils, the Ba levels in C. asiatica were still higher than the initial Ba level even though Ba elimination occurred. In conclusion, the leaves, stems and roots of C. asiatica are good biomonitors of Ba pollution. PMID:24575242

  15. Barium Tagging for nEXO

    Science.gov (United States)

    Fudenberg, Daniel; Brunner, Thomas; Varentsov, Victor; Devoe, Ralph; Dilling, Jens; Gratta, Giorgio; nEXO Collaboration

    2015-10-01

    nEXO is a next-generation experiment designed to search for 0 νββ -decay of Xe-136 in a liquid xenon time projection chamber. Positive observation of this decay would determine the neutrino to be a Majorana particle In order to greatly reduce background contributions to this search, the collaboration is developing several ``barium tagging'' techniques to recover and identify the decay daughter, Ba-136. ``Tagging'' may be available for a 2nd phase of nEXO and will push the sensitivity beyond the inverted neutrino-mass hierarchy. Tagging methods in testing for this phase include Ba-ion capture on a probe with identification by resonance ionization laser spectroscopy, and Ba capture in solid xenon on a cold probe with identification by fluorescence. In addition, Ba tagging for a gas-phase detector, appropriate for a later stage, is being tested. Here efficient ion extraction from heavy carrier gases is key. Detailed gas-dynamic and ion transport calculations have been performed to optimize for ion extraction. An apparatus to extract Ba ions from up to 10 bar xenon gas into vacuum using an RF-only funnel has been constructed and demonstrates extraction of ions from noble gases. We will present this system's status along with results of this R&D program.

  16. Fabry-Perot measurements of barium temperature in fluorescent lamps

    Science.gov (United States)

    Hadrath, S.; Garner, R.

    2010-04-01

    A scanning Fabry-Perot interferometer (FPI) is used to determine the temperature of barium atoms that are liberated from the electrodes of fluorescent lamps during their steady-state operation. Barium, a constituent of the work function lowering emitter material that is placed on the tungsten coil that forms the electrode, is liberated primarily by evaporation from the hot (~1300 K) thermionic electrode. However, there may be situations or modes of operation in which barium is, in addition, sputtered, a condition which may lead to increased end-darkening, shortened life and increased mercury consumption in the lamp. Using the FPI diagnostic, the occurrence of sputtering is inferred when barium temperatures are much greater than the electrode temperature. The FPI diagnostic senses resonance radiation (λ = 553 nm) emitted by barium atoms excited in the low pressure discharge environment, and infers temperature from the Doppler broadened linewidth. The diagnostic has proven to be successful in a number of situations. Measurements have been made on rare gas discharges and on Hg-argon discharges for different discharge currents, gas pressures and auxiliary coil currents. Measurements are phase resolved for ac-driven discharges.

  17. Fabry-Perot measurements of barium temperature in fluorescent lamps

    Energy Technology Data Exchange (ETDEWEB)

    Hadrath, S [OSRAM GmbH, Research Europe, SIGMA Technopark Augsburg, Werner-von-Siemens-Str. 6, 86159 Augsburg (Germany); Garner, R, E-mail: stefan.hadrath@osram.co [OSRAM Sylvania, Central Research and Services Laboratory, Beverly, MA 01915-1015 (United States)

    2010-04-28

    A scanning Fabry-Perot interferometer (FPI) is used to determine the temperature of barium atoms that are liberated from the electrodes of fluorescent lamps during their steady-state operation. Barium, a constituent of the work function lowering emitter material that is placed on the tungsten coil that forms the electrode, is liberated primarily by evaporation from the hot ({approx}1300 K) thermionic electrode. However, there may be situations or modes of operation in which barium is, in addition, sputtered, a condition which may lead to increased end-darkening, shortened life and increased mercury consumption in the lamp. Using the FPI diagnostic, the occurrence of sputtering is inferred when barium temperatures are much greater than the electrode temperature. The FPI diagnostic senses resonance radiation ({lambda} = 553 nm) emitted by barium atoms excited in the low pressure discharge environment, and infers temperature from the Doppler broadened linewidth. The diagnostic has proven to be successful in a number of situations. Measurements have been made on rare gas discharges and on Hg-argon discharges for different discharge currents, gas pressures and auxiliary coil currents. Measurements are phase resolved for ac-driven discharges.

  18. 6-Sulphated chondroitins have a positive influence on axonal regeneration.

    Directory of Open Access Journals (Sweden)

    Rachel Lin

    Full Text Available Chondroitin sulphate proteoglycans (CSPGs upregulated in the glial scar inhibit axon regeneration via their sulphated glycosaminoglycans (GAGs. Chondroitin 6-sulphotransferase-1 (C6ST-1 is upregulated after injury leading to an increase in 6-sulphated GAG. In this study, we ask if this increase in 6-sulphated GAG is responsible for the increased inhibition within the glial scar, or whether it represents a partial reversion to the permissive embryonic state dominated by 6-sulphated glycosaminoglycans (GAGs. Using C6ST-1 knockout mice (KO, we studied post-injury changes in chondroitin sulphotransferase (CSST expression and the effect of chondroitin 6-sulphates on both central and peripheral axon regeneration. After CNS injury, wild-type animals (WT showed an increase in mRNA for C6ST-1, C6ST-2 and C4ST-1, but KO did not upregulate any CSSTs. After PNS injury, while WT upregulated C6ST-1, KO showed an upregulation of C6ST-2. We examined regeneration of nigrostriatal axons, which demonstrate mild spontaneous axon regeneration in the WT. KO showed many fewer regenerating axons and more axonal retraction than WT. However, in the PNS, repair of the median and ulnar nerves led to similar and normal levels of axon regeneration in both WT and KO. Functional tests on plasticity after the repair also showed no evidence of enhanced plasticity in the KO. Our results suggest that the upregulation of 6-sulphated GAG after injury makes the extracellular matrix more permissive for axon regeneration, and that the balance of different CSs in the microenvironment around the lesion site is an important factor in determining the outcome of nervous system injury.

  19. Barium Depletion in the NSTAR Discharge Cathode After 30,000 Hours of Operation

    Science.gov (United States)

    Polk, James E.; Capece, Angela M.; Mikellides, Ioannis G.; Katz, Ira

    2010-01-01

    Dispenser hollow cathodes rely on a consumable supply of barium released by impregnant materials in the pores of a tungsten matrix to maintain a low work function surface. Examinations of cathode inserts from long duration ion engine tests show deposits of tungsten at the downstream end that appear to block the flow of barium from the interior. In addition, a numerical model of barium transport in the insert plasma indicates that the barium partial pressure in the insert may exceed the equilibrium vapor pressure of the dominant barium-producing reaction, and it was postulated previously that this would suppress barium loss in the upstream part of the insert. New measurements of the depth of barium depletion from a cathode insert operated for 30,352 hours reveal that barium loss is confined to a narrow region near the downstream end, confirming this hypothesis.

  20. Selectivity in biomineralization of barium and strontium.

    Science.gov (United States)

    Krejci, Minna R; Wasserman, Brian; Finney, Lydia; McNulty, Ian; Legnini, Daniel; Vogt, Stefan; Joester, Derk

    2011-11-01

    The desmid green alga Closterium moniliferum belongs to a small number of organisms that form barite (BaSO(4)) or celestite (SrSO(4)) biominerals. The ability to sequester Sr in the presence of an excess of Ca is of considerable interest for the remediation of (90)Sr from the environment and nuclear waste. While most cells dynamically regulate the concentration of the second messenger Ca(2+) in the cytosol and various organelles, transport proteins rarely discriminate strongly between Ca, Sr, and Ba. Herein, we investigate how these ions are trafficked in C. moniliferum and how precipitation of (Ba,Sr)SO(4) crystals occurs in the terminal vacuoles. Towards this goal, we simultaneously visualize intracellular dynamics of multiple elements using X-ray fluorescence microscopy (XFM) of cryo-fixed/freeze-dried samples. We correlate the resulting elemental maps with ultrastructural information gleaned from freeze-fracture cryo-SEM of frozen-hydrated cells and use micro X-ray absorption near edge structure (micro-XANES) to determine sulfur speciation. We find that the kinetics of Sr uptake and efflux depend on external Ca concentrations, and Sr, Ba, and Ca show similar intracellular localization. A highly ion-selective cross-membrane transport step is not evident. Based on elevated levels of sulfate detected in the terminal vacuoles, we propose a "sulfate trap" model, where the presence of dissolved barium leads to preferential precipitation of (Ba,Sr)SO(4) due to its low solubility relative to SrSO(4) and CaSO(4). Engineering the sulfate concentration in the vacuole may thus be the most direct way to increase the Sr sequestered per cell, an important consideration in using desmids for phytoremediation of (90)Sr. Copyright © 2011 Elsevier Inc. All rights reserved.

  1. Acute barium toxicity from ingestion of "snake" fireworks.

    Science.gov (United States)

    Rhyee, Sean H; Heard, Kennon

    2009-12-01

    Ingestion of fireworks has been infrequently reported in the medical literature. We describe a case of acute barium poisoning following firework ingestion. A 35-year-old male with a history of severe mental retardation presented with vomiting and diarrhea following ingestion of 16 small fireworks ("color snakes" and "black snakes"). His condition rapidly deteriorated and he developed obtundation, wide complex dysrhythmias, and respiratory failure. Approximately 12 hours following ingestion, his serum potassium level was 1.5 mmol/L with a serum barium level of 20,200 microg/mL (reference range firework ingestion is uncommon, clinicians should be prepared for potentially severe complications. In the case of barium poisoning, treatment consists of potassium supplementation, along with respiratory and hemodynamic support.

  2. Barium titanate thick films prepared by screen printing technique

    Directory of Open Access Journals (Sweden)

    Mirjana M. Vijatović

    2010-06-01

    Full Text Available The barium titanate (BaTiO3 thick films were prepared by screen printing technique using powders obtained by soft chemical route, modified Pechini process. Three different barium titanate powders were prepared: i pure, ii doped with lanthanum and iii doped with antimony. Pastes for screen printing were prepared using previously obtained powders. The thick films were deposited onto Al2O3 substrates and fired at 850°C together with electrode material (silver/palladium in the moving belt furnace in the air atmosphere. Measurements of thickness and roughness of barium titanate thick films were performed. The electrical properties of thick films such as dielectric constant, dielectric losses, Curie temperature, hysteresis loop were reported. The influence of different factors on electrical properties values was analyzed.

  3. 40 CFR 721.10010 - Barium manganese oxide (BaMnO3).

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 30 2010-07-01 2010-07-01 false Barium manganese oxide (BaMnO3). 721... Substances § 721.10010 Barium manganese oxide (BaMnO3). (a) Chemical substance and significant new uses subject to reporting. (1) The chemical substance identified as barium manganese oxide (BaMnO3) (PMN P-00...

  4. 21 CFR 201.304 - Tannic acid and barium enema preparations.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 4 2010-04-01 2010-04-01 false Tannic acid and barium enema preparations. 201.304... Tannic acid and barium enema preparations. (a) It has become a widespread practice for tannic acid to be added to barium enemas to improve X-ray pictures. Tannic acid is capable of causing diminished liver...

  5. The diagnosis of gastro-esophageal reflux disease cannot be made with barium esophagograms

    NARCIS (Netherlands)

    Saleh, C. M. G.; Smout, A. J. P. M.; Bredenoord, A. J.

    2015-01-01

    For over 50 years, barium studies have been used to diagnose gastro-esophageal reflux disease (GERD), but the value of this test is controversial. Our study aimed to determine if barium esophagograms can be used to diagnose GERD. Barium esophagograms and pH-impedance measurement were performed in 20

  6. 49 CFR 173.182 - Barium azide-50 percent or more water wet.

    Science.gov (United States)

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Barium azide-50 percent or more water wet. 173.182 Section 173.182 Transportation Other Regulations Relating to Transportation PIPELINE AND HAZARDOUS... Class 1 and Class 7 § 173.182 Barium azide—50 percent or more water wet. Barium azide—50 percent or more...

  7. 75 FR 36629 - Barium Chloride From the People's Republic of China: Continuation of Antidumping Duty Order

    Science.gov (United States)

    2010-06-28

    ... International Trade Administration Barium Chloride From the People's Republic of China: Continuation of... the antidumping duty order on barium chloride from the People's Republic of China (``PRC'') would... of initiation of the third sunset review of the antidumping duty order on barium chloride from the...

  8. The Kerr nonlinearity of the beta-barium borate crystal

    DEFF Research Database (Denmark)

    Bache, Morten; Guo, Hairun; Zhou, Binbin

    2013-01-01

    A popular crystal for ultrafast cascading experiments is beta-barium-borate (β-BaB2O4, BBO). It has a decent quadratic nonlinear coefficient, and because the crystal is anisotropie it can be birefringence phase-matched for type I (oo → e) second-harmonic generation (SHG). For femtosecond experime......A popular crystal for ultrafast cascading experiments is beta-barium-borate (β-BaB2O4, BBO). It has a decent quadratic nonlinear coefficient, and because the crystal is anisotropie it can be birefringence phase-matched for type I (oo → e) second-harmonic generation (SHG). For femtosecond...

  9. Esophageal intramural pseudodiverticulosis characterized by barium esophagography: a case report

    LENUS (Irish Health Repository)

    O'Connor, Owen J

    2010-05-21

    Abstract Introduction Esophageal intramural pseudodiverticulosis is a rare condition characterized by the dilatation of the submucosal glands. Case presentation We present a case of esophageal intramural pseudodiverticulosis in a 72-year-old Caucasian man who presented with dysphagia and with a background history of alcohol abuse. An upper gastrointestinal endoscopy of our patient showed an esophageal stricture with abnormal mucosal appearances, but no malignant cells were seen at biopsy. Appearances on a barium esophagram were pathognomonic for esophageal intramural pseudodiverticulosis. Conclusion We demonstrate the enduring usefulness of barium esophagography in the characterization of abnormal mucosal appearances at endoscopy.

  10. Preparation, structure and dielectric property of barium stannate titanate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Wei Xiaoyong [Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, Xi' an Jiaotong Univesity, Xi' an 710049 (China)]. E-mail: wdy@mail.xjtu.edu.cn; Yao Xi [Electronic Materials Research Laboratory, Key Laboratory of the Ministry of Education, Xi' an Jiaotong Univesity, Xi' an 710049 (China)

    2007-02-25

    The processing route of barium stannate titanate ceramics were optimized to prepare full composition range solid solution sample. The phase structure, microscopic morphology and dielectric properties of barium stannate titanate ceramics were studied. X-ray diffraction patterns indicated that the samples are of single perovskite structure. Linear empirical relationship between crystal lattice and tin content was proposed. This relationship is valid covering the full composition range, which suggests that this solid solution system is ultimate mutual soluble. The phase transition behavior was studied and a phase diagram was obtained based on the dielectric measurements.

  11. The ecology and biotechnology of sulphate-reducing bacteria.

    Science.gov (United States)

    Muyzer, Gerard; Stams, Alfons J M

    2008-06-01

    Sulphate-reducing bacteria (SRB) are anaerobic microorganisms that use sulphate as a terminal electron acceptor in, for example, the degradation of organic compounds. They are ubiquitous in anoxic habitats, where they have an important role in both the sulphur and carbon cycles. SRB can cause a serious problem for industries, such as the offshore oil industry, because of the production of sulphide, which is highly reactive, corrosive and toxic. However, these organisms can also be beneficial by removing sulphate and heavy metals from waste streams. Although SRB have been studied for more than a century, it is only with the recent emergence of new molecular biological and genomic techniques that we have begun to obtain detailed information on their way of life.

  12. Microwave assisted synthesis of nano sized sulphate doped hydroxyapatite

    Energy Technology Data Exchange (ETDEWEB)

    Alshemary, Ammar Z.; Goh, Yi-Fan; Akram, Muhammad; Razali, Ili Rabihah [Department of Chemistry, Faculty of Science, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor Darul Ta’zim (Malaysia); Abdul Kadir, Mohammed Rafiq [Medical Implant Technology Group, Faculty of Biomedical Engineering and Health Science, Universiti Teknologi Malaysia,81310 UTM Skudai, Johor Darul Ta’zim (Malaysia); Hussain, Rafaqat, E-mail: rafaqat@kimia.fs.utm.my [Ibnu Sina Institute for Fundamental Science Studies, Universiti Teknologi Malaysia, 81310 UTM Skudai, Johor DarulTa’zim (Malaysia)

    2013-06-01

    Highlights: ► Phase pure nano-sized sulphur doped hydroxyapatite has been synthesized. ► TEM analysis confirmed formation of needle shaped structure. ► Lattice parameters and cell volume increased with increase in sulphate doping. ► Crystallite size decreased as sulphate content inside the structure increased. ► Degree of crystallinity decreased with increase in sulphate substitution. - Abstract: Inorganic sulphate is required by all mammalian cells to function properly, it is the fourth most abundant anion in the human plasma. Sulphate ions are the major source of sulphur which is considered an important element for sustenance of life as it is present in the essential amino and is required by cells to function properly. In this study we have successfully substituted sulphate ions (SO{sub 4}{sup 2−}) into hydroxyapatite (Ca{sub 10}(PO{sub 4}){sub 6−x}(SO{sub 4}){sub x}(OH){sub 2−x}) lattice via ion exchange process with phosphate group. Concentration of SO{sub 4}{sup 2−} ions was varied between X = 0.05–0.5, using (Ca (NO{sub 3}){sub 2}·4H{sub 2}O), ((NH{sub 4}){sub 2}HPO{sub 4}) and (Na{sub 2}SO{sub 4}) as starting materials. X-ray diffraction (XRD), Fourier transform IR spectroscopy (FTIR), showed that the substitution of SO{sub 4}{sup 2−} ions into the lattice resulted in peak broadening and reduced peak height due to the amorphous nature and reduced crystallinity of the resulting HA powder. Transmission electron microscopy (TEM) and field emission electron microscopy (FESEM) analysis confirmed the formation of needle shaped particles of 41 nm size with homogenous and uniform distribution of element within the HA structure.

  13. Treatment with magnesium sulphate in pre-term birth

    DEFF Research Database (Denmark)

    Wolf, Hans; Hegaard, H K; Greisen, G

    2012-01-01

    Premature birth increases a child's risk of cerebral palsy and death. The aim of this work is to investigate the association between treatment with magnesium sulphate during premature deliveries and infants' cerebral palsy and mortality through a meta-analysis of observational studies. A comprehe......Premature birth increases a child's risk of cerebral palsy and death. The aim of this work is to investigate the association between treatment with magnesium sulphate during premature deliveries and infants' cerebral palsy and mortality through a meta-analysis of observational studies...

  14. Synthesis of nanosized barium titanate/epoxy resin composites and ...

    Indian Academy of Sciences (India)

    Anechoic chamber; barium titanate; electromagnetic interference and compatibility; epoxy resin composites; microwave absorbers; radio frequency absorbers. 1. Introduction. Absorption of unwanted microwave energy or electromag- netic interference (EMI) is a pressing problem due to the proliferation of complex high ...

  15. Barium Ferrite Films Grown By Pulsed Laser Ablation

    NARCIS (Netherlands)

    Lisfi, A.; Lodder, J.C.; de Haan, P.; Roesthuis, F.J.G.

    1998-01-01

    Abstract available only. It is known that barium ferrite (BaFe12019) can grow with perpendicular anisotropy on A1203 a single crystal substrate,' but also on an amorphous substrate by using a ZnO buffer.2 Because of its large magnetic anisotropy which can easily overcome the shape anisotropy of the

  16. Magnetic relaxation in Barium ferrite films with perpendicular anisotropy

    NARCIS (Netherlands)

    Lisfi, A.; Lodder, J.C.; de Haan, P.; Bolhuis, Thijs; Roesthuis, F.J.G.

    1999-01-01

    Magnetic relaxation analysis have been carried out on barium ferrite films with perpendicular anisotropy, grown by pulsed laser deposition. Logarithmic behaviour on the time dependence of the magnetisation has been observed. The measured and corrected viscosity exhibit a large difference because of

  17. peroxo-oxalate preparation of doped barium titanate

    NARCIS (Netherlands)

    van der Gijp, S.; Winnubst, Aloysius J.A.; Verweij, H.

    1999-01-01

    The peroxo-oxalate complexation method is a method that can be used for the preparation of doped barium titanate. In this paper we focus on BaTi0.91Zr0.09O3, which can be used for discharge capacitors in lamp starters. The preparation method described here is based on the complexation and subsequent

  18. Studies on gas sensing performance of pure and modified barium ...

    Indian Academy of Sciences (India)

    Barium strontium titanate ((Ba0.87Sr0.13)TiO3–BST) ceramic powder was prepared by mechanochemical process. The thick films of different thicknesses of BST were prepared by screen-printing technique and gas-sensing performance of these films was tested for various gases. The films showed highest response and ...

  19. Dose-area product measurements during Barium enema radiograph ...

    African Journals Online (AJOL)

    The aim of this study was to obtain a direct measurement of the typical dose delivered to an average adult patient during a barium enema examination. Measurement was done on a sample of 50 patients at three departments, using a dose-area product (DAP) meter. The comparison of the results with UK median levels ...

  20. Synthesis and characterization of nickel/barium hexa-aluminate ...

    Indian Academy of Sciences (India)

    Electrodeposition of nickel/barium hexa-aluminate (Ni/BHA) composite coatings has been carried out from a Watt's bath on mild steel substrate. BHA powders with plate habit were synthesized by solution combustion synthesis followed by heat treatment to ensure complete conversion to the hexa-aluminate phase.

  1. Thermal expansion behaviour of barium and strontium zirconium ...

    Indian Academy of Sciences (India)

    Unknown

    Thermal expansion behaviour of barium and strontium zirconium phosphates. P SRIKARI TANTRI, K GEETHA†, A M UMARJI† and SHEELA K RAMASESHA*. Materials Science Division, National Aerospace Laboratories, Bangalore 560 017, India. †Materials Research Centre, Indian Institute of Science, Bangalore 560 ...

  2. Dielectrics of lead zirconate bonded with barium borate glass

    Indian Academy of Sciences (India)

    K SINGH and ARUNA INDURKAR. Department of Physics. Nagpur University, Nagpur 440 010, India. MS received 25 May 1987; revised it July 1988. Abstract. Dielectric constant variation with temperature and frequency is reported for barium-borate glass-bonded lead zirconate. Lowering of the relative permittivity of the.

  3. Magnetoelectric effect in cobalt ferrite–barium titanate composites ...

    Indian Academy of Sciences (India)

    Home; Journals; Pramana – Journal of Physics; Volume 58; Issue 5-6. Magnetoelectric effect in cobalt ferrite–barium titanate composites and their electrical properties. R P Mahajan K K Patankar M B Kothale S C Chaudhari V L Mathe S A Patil. Colossal Magnetoresistance & Other Materials Volume 58 Issue 5-6 May-June ...

  4. ORIGINAL ARTICLE ORIG ORIG Comparison of barium and ...

    African Journals Online (AJOL)

    Background. Simulation of patients with carcinoma of the oesophagus using radio-opaque contrast is a standard step in treatment planning prior to delivering radiation therapy. Various contrast mediums such as barium, gastrograffin and hexabrix have been used for simulation at different centres. Objective. The purpose of ...

  5. Grass-cellulose as energy source for biological sulphate removal from acid mine effluents

    CSIR Research Space (South Africa)

    Greben, HA

    2008-11-01

    Full Text Available The biological sulphate removal technology requires carbon and energy sources to reduce sulphate to sulphide. Plant biomass, e.g. grass, is a sustainable source of energy when cellulose is utilised during anaerobic degradation, producing volatile...

  6. Thermodynamic study of copper sulphate and zinc sulphate in water and binary aqueous mixtures of propylene glycol

    OpenAIRE

    R. C. Thakur; Ravi Sharma; Meenakshi; Ashish Kumar

    2015-01-01

    Partial molar volumes of copper sulphate and zinc sulphate have been determined in water and binary aqueous mixtures of propylene glycol (2,4,6 and 8% by weight of propylene glycol) at 303.15 K with the help of density measurements. Effect of temperature on the partial molar volumes was also analysed for these salts in water and binary aqueous mixtures of propylene glycol. Results obtained have been analysed by Masson’s equation and the experimental values of slopes and partial molar volumes ...

  7. Factors influencing the crystallisation of highly concentrated water-in-oil emulsions: A DSC study

    OpenAIRE

    Irina Masalova; Karina Kovalchuk

    2012-01-01

    Highly concentrated emulsions are used in a variety of applications, including the cosmetics, food and liquid explosives industries. The stability of these highly concentrated water-in-oil emulsions was studied by differential scanning calorimetry. Crystallisation of the emulsions was initiated by exposing the emulsions to a low temperature. The effects of surfactant type, electrolyte concentration and electrolyte composition in the aqueous phase on emulsion crystallisation temperature were s...

  8. Sensitivity and specificity of copper sulphate test in determining ...

    African Journals Online (AJOL)

    Background: The accuracy of the copper sulphate method for the rapid screening of prospective blood donors has been questioned because this rapid screening method may lead to false deferral of truly eligible prospective blood donors. Objective: This study was aimed at determining the sensitivity and specificity of copper ...

  9. Investigation of sulphate origins in the Jeffara aquifer, southeastern ...

    Indian Academy of Sciences (India)

    Gypsum, anhydrite, mirabilite and thenardite have been examined as potential sources of sulphate dissolved in groundwater. Since Jeffara groundwater is recharged by the Continental Intercalaire (CI) geothermal water, water temperature decreases from the CI to the Jeffara aquifer. Solubility of the majority of minerals is ...

  10. Anodically generated manganese(III) sulphate for the oxidation of ...

    Indian Academy of Sciences (India)

    Unknown

    2Mn(III) Mn(II) + Mn(IV). (1). Though the solution appeared to be stable for more than a month at [H+] > 5⋅0 M, solution of manga- nese(III) sulphate prepared afresh daily was used in the experiments. All other reagents were prepared from AR grade chemicals. Triply distilled water was used for preparing aqueous solutions.

  11. Kinetic and Thermodynamic Studies on Adsorption of Sulphate from ...

    African Journals Online (AJOL)

    DELL USER

    Transmission Electron Microscopy (TEM) and Fourier transform infrared spectroscopy (FTIR). The adsorbents were employed for the batch adsorption of sulphate ion from aqueous solution. Some variable effects such as pH, initial concentration, contact time, adsorbent dosage and temperature on adsorption were also ...

  12. Biological sulphate reduction with primary sewage sludge in an ...

    African Journals Online (AJOL)

    The experimental results indicate that high treatment efficiency was achieved at more than 90% sulphate reduction at a liquid hydraulic retention time (HRT) of 13.5 h. In this ... From these results, it can be concluded that the UASB configuration using PSS as energy source would be a viable method for the BSR of AMD.

  13. Inhibition of Bio corrosion of steel coupon by sulphate reducing ...

    African Journals Online (AJOL)

    ADOWIE PERE

    -8362. J. Appl. Sci. Environ. Manage. August 2017. Vol. 21 (5) 833-838. Full-text Available Online at www.ajol.info and www.bioline.org.br/ja. Inhibition of Bio corrosion of steel coupon by sulphate reducing bacteria and Iron oxidizing bacteria ...

  14. Inhibition of bio corrosion of steel coupon by sulphate reducing ...

    African Journals Online (AJOL)

    SRB) and Iron oxidizing bacteria (IOB) using Aloe vera (Aloe barbadensis) extract was tested. The water sample revealed a heterotrophic bacterial count of 1.7x103 cfu/ml for the sulphate reducing bacteria and 4.1x103 cfu/ml for the Iron oxidizing ...

  15. Development of a kinetic model for biological sulphate reduction ...

    African Journals Online (AJOL)

    base chemistry for water, carbonate, acetate, propionate, ammonium and phosphate species have been included, as well as the ... These bioprocesses produce and consume inter alia sulphate and sulphide acid/base species which are not present in the .... and did not consider the kinetics for the reactions subsequent.

  16. Kinetics and mechanism of protection of thymine from sulphate ...

    Indian Academy of Sciences (India)

    Unknown

    The rates and the quantum yields (φ) of oxidation of thymine by sulphate radical anion ... quantum yields (φexptl) and the quantum yields calculated (φcl) assuming caffeic acid acting only as a scavenger of ... Even though sugar radicals are actually responsible for strand break formation in DNA, experimental results clearly ...

  17. The effect of water on the sulphation of limestone

    Energy Technology Data Exchange (ETDEWEB)

    Chunbo Wang; Lufei Jia; Yewen Tan; E.J. Anthony [North China Electric Power University, Baoding City (China). School of Energy and Power Engineering

    2010-09-15

    A series of tests was conducted in a thermogravimetric analyzer (TGA) to study the sulphation behaviour of limestone in the presence of water over the temperature range of 800-850{sup o}C. Four different Canadian limestones, all with a particle size range of 75-425 {mu}m, were sulphated using a synthetic flue gas with a composition of 15% CO{sub 2}, 3% O{sub 2}, 0% or 10% H{sub 2}O, 1750 ppm SO{sub 2} and the balance N{sub 2}. Water was shown to have a significant promotional effect on sulphation, especially in the diffusion-controlled stage. However, the effect of water during the kinetic-controlled stage appeared to be much less pronounced. Based on these results, it is proposed that the presence of water leads to the transient formation of Ca(OH){sub 2} as an intermediate, which in turn reacts with SO{sub 2} at a faster rate than CaO does. Alternatively stated, it appears that H{sub 2}O acts as catalyst for the sulphation reaction of CaO. 30 refs., 8 figs., 3 tabs.

  18. Growth morphology of zinc tris (thiourea) sulphate crystals

    Indian Academy of Sciences (India)

    The growth morphology of crystals of zinc tris(thiourea) sulphate (ZTS) is investigated experimentally, and computed using the Hartman–Perdok approach. Attachment energies of the observed habit faces are calculated for determining their relative morphological importance. A computer code is developed for carrying out ...

  19. Stability of Ceftiofur Sodium and Cefquinome Sulphate in Intravenous Solutions

    Directory of Open Access Journals (Sweden)

    Agnieszka Dołhań

    2014-01-01

    Full Text Available Stability of ceftiofur sodium and cefquinome sulphate in intravenous solutions was studied. Chromatographic separation and quantitative determination were performed by using a high-performance liquid chromatography with UV-DAD detection. During the stability study, poly(vinylchloride minibags were filled with a solution containing 5 mg of ceftiofur sodium or cefquinome sulphate and diluted to 0.2 mg/mL with suitable intravenous solution depending on the test conditions. The solutions for the study were protected from light and stored at room temperature (22°C, refrigerated (6°C, frozen (−20°C for 30 days, and then thawed at room temperature. A comparison of results obtained at 22°C and 6°C for the same intravenous solutions showed that temperature as well as components of solutions and their concentration had an influence on the stability of ceftiofur sodium and cefquinome sulphate. It was found that ceftiofur sodium and cefquinome sulphate dissolved in intravenous solutions used in this study may be stored at room temperature and at 6°C for up to 48 h.

  20. Ovarian steroid sulphate functions as priming pheromone in male ...

    Indian Academy of Sciences (India)

    The study reveals that pre-ovulatory females of the fish Barilius bendelisis (Ham.) release sex steroids and their conjugates into the water and that a steroid sulphate of these compounds functions as a potent sex pheromone which stimulates milt production in conspecific males prior to spawning. Since males exposed to the ...

  1. Impact of ammonia and sulphate concentration on thermophilic anaerobic digestion.

    Science.gov (United States)

    Siles, J A; Brekelmans, J; Martín, M A; Chica, A F; Martín, A

    2010-12-01

    The effect of increasing concentrations of ammonia and sulphate on thermophilic anaerobic digestion (52 degrees C) was studied at laboratory-scale. The substrate consisted of a synthetic solution supplemented with ammonia and sodium sulphate. In terms of biogas production, the results showed that the C/N and C/SO(4)(2-) thresholds were 4.40 and 1.60, respectively, corresponding to 620 mg FA (free ammonia)/L and 1400 mg SO(4)(2-)/L. No reduction in biogas production was observed until reaching the above concentration of sulphate in the sulphate toxicity test. However, when the concentration of ammonia was increased to 620 mg FA/L in the ammonia toxicity test, a gradual decrease of 21% was observed for the biogas. In order to characterise each set of experiments kinetically, a biogas production first-order kinetic model was used to fit the experimental data. The proposed model accurately predicted the behaviour of the microorganisms affecting the thermophilic anaerobic digestion, allowing its evolution to be predicted. 2010 Elsevier Ltd. All rights reserved.

  2. Density and viscosity of magnesium sulphate in formamide + ...

    Indian Academy of Sciences (India)

    Abstract. Densities (ρ) and viscosities (η) of different strengths of magnesium sulphate (MgSO4) in varying proportions of formamide (FA) + ethylene glycol as mixed solvents were measured at room temperature. The experimental values of ρ and η were used to calculate the values of the apparent molar volume, (φv), partial ...

  3. Sodium-dodecyl-sulphate-assisted synthesis of Ni nanoparticles ...

    Indian Academy of Sciences (India)

    Stabilized nickel nanoparticles (SNNPs) were prepared using Ni(acac) 2 (acac = acetylacetonate) via a simplesolvothermal method. The synthesis of the nickel nanoparticles was performed in the presence of sodium dodecyl sulphate(SDS) of different concentrations (mole ratios of SDS:Ni(acac) 2 = 1:1, 2:1 and 4:1), as the ...

  4. Mechanism of protection of adenosine from sulphate radical anion ...

    Indian Academy of Sciences (India)

    The photooxidation of adenosine in presence of peroxydisulphate (PDS) has been studied by spectrophotometrically measuring the absorbance of adenosine at 260 nm. The rates of oxidation of adenosine by sulphate radical anion have been determined in the presence of different concentrations of caffeic acid. Increase in ...

  5. Decolourisation and degradation of reactive blue 2 by sulphate ...

    African Journals Online (AJOL)

    This work was performed to determine the influence of heat treatment on sewage sludge and addition of zero valent iron (ZVI) on the degradation and decolourisation of an anthraquinone dye, reactive blue 2 (RB 2). A consortium of sulphate reducing bacteria (SRB) in a biosulphidogenic batch reactor with biodigester ...

  6. Decolourisation and degradation of textile dyes using a sulphate ...

    African Journals Online (AJOL)

    Successful decolourisation and degradation of textile dyes was achieved in a biosulphidogenic batch reactor using biodigester sludge from a local municipality waste treatment plant as a source of carbon and microflora that augmented a sulphate reducing bacteria (SRB) consortium. Orange II (O II) was decolourised by ...

  7. Structure transitions between copper-sulphate and copper-chloride ...

    Indian Academy of Sciences (India)

    Administrator

    Structure transitions between copper-sulphate and copper-chloride UPD phases on Au(111). 755. Acknowledgements. This work was supported by Research Center Jülich and the University of Bern. I V P also acknowledges support of Deutscher Akademischer Austausch. Dienst (DAAD) for a Ph D Fellowship. References.

  8. Inhibition of Bio corrosion of steel coupon by sulphate reducing ...

    African Journals Online (AJOL)

    ADOWIE PERE

    Inhibition of Bio corrosion of steel coupon by sulphate reducing bacteria and Iron oxidizing bacteria using Aloe Vera (Aloe barbadensis) extracts. *. 1. AGWA, OK; IYALLA, D; ABU, GO. Department of Microbiology, Faculty of Science, University of Port Harcourt,. P.M.B. 5323, Rivers State, Nigeria. *Corresponding author: ...

  9. Effect of anhydrous magnesium sulphate fertilizer and cutting ...

    African Journals Online (AJOL)

    Effect of anhydrous magnesium sulphate fertilizer on Panicum maximum yield and chemical composition of the resultant herbage harvested at 3, 4 and 5 weeks of age was investigated. The treatments were labeled T1 to T6. T1 was fertilized and harvested at 3 weeks cutting interval, T2 was fertilized and harvested at 4 ...

  10. Antenatal magnesium sulphate neuroprotection in the preterm infant

    NARCIS (Netherlands)

    Marret, Stephane; Doyle, Lex W.; Crowther, Caroline A.; Middleton, Philippa

    Very preterm infants have high rates of neurological impairments and disabilities. These rates have not diminished as the survival rates have improved. Basic science research suggests that magnesium sulphate before birth can be neuroprotective for the preterm fetus. Some, but not all, observational

  11. Mechanism of interaction of vincristine sulphate and rifampicin with ...

    Indian Academy of Sciences (India)

    The mechanism of interaction of vincristine sulphate (VS) and rifampicin (RF) with bovine serum albumin (BSA) has been studied by quenching of BSA fluorescence by RF/VS. The Stern-Volmer plot indicates the presence of a static component in the quenching mechanism. Results also show that both the tryptophan ...

  12. Safety and efficacy of Bolus administration of magnesium sulphate ...

    African Journals Online (AJOL)

    Objective: We evaluated a modified method of magnesium sulphate administration with respect to safety, efficacy and maternofetal outcome. Design, Setting And Subjects: This was a prospective cohort study conducted at the UBTH, Benin City with patients managed for severe preeclampsia between June and December, ...

  13. Contribution of sodium dodecyl sulphate and sodium lauric acid in ...

    Indian Academy of Sciences (India)

    Contribution of sodium dodecyl sulphate and sodium lauric acid in the one-pot synthesis of intercalated ZnAl-layered double hydroxides. Fengzhu Lv Zilin Meng Penggang Li Yihe Zhang Guocheng Lv Qian Zhang Zhilei Zhang. Volume 38 Issue 4 August 2015 pp 1079-1085. Fulltext. Click here to view fulltext PDF.

  14. Effects of electron acceptors on sulphate reduction activity in activated sludge processes

    NARCIS (Netherlands)

    Rubio-Rincón, Francisco; Lopez-Vazquez, Carlos; Welles, L.; van den Brand, Tessa; Abbas, B.A.; van Loosdrecht, Mark C.M.; Brdanovic, Damir

    2017-01-01

    The concentration of sulphate present in wastewater can vary from 10 to 500 mg SO4 2−/L. During anaerobic conditions, sulphate is reduced to sulphide by sulphate-reducing bacteria (SRB). Sulphide generation is undesired in wastewater treatment plants (WWTPs). Previous

  15. Heparanase induces a differential loss of heparan sulphate domains in overt diabetic nephropathy.

    NARCIS (Netherlands)

    Wijnhoven, T.J.; Hoven, M.J.W. van den; Ding, H.; Kuppevelt, A.H.M.S.M. van; Vlag, J. van der; Berden, J.H.M.; Prinz, R.A.; Lewis, E.J.; Schwartz, M.; Xu, X.

    2008-01-01

    AIMS/HYPOTHESIS: Recent studies suggest that loss of heparan sulphate in the glomerular basement membrane (GBM) of the kidney with diabetic nephropathy is due to the increased production of heparanase, a heparan sulphate-degrading endoglycosidase. Our present study addresses whether heparan sulphate

  16. Treatment of acid and sulphate-rich effluents in an integrated ...

    African Journals Online (AJOL)

    A novel chemical/biological process is described in which sulphate and sulphide are removed simultaneously during biological treatment. Partial sulphate removal is achieved during chemical pre-treatment. In the biological stage sulphate is reduced to sulphide in a complete-mixed reactor through addition of sucrose or ...

  17. Barium toxicity and the role of the potassium inward rectifier current.

    Science.gov (United States)

    Bhoelan, B S; Stevering, C H; van der Boog, A T J; van der Heyden, M A G

    2014-07-01

    Barium is a stable divalent earth metal and highly toxic upon acute and chronic exposure. Barium is present in many products and involved in a number of industrial processes. Barium targets the potassium inward rectifier channels (IRCs) of the KCNJx gene family. Extracellular barium enters and strongly binds the potassium selectivity filter region resulting in blockade of the potassium conducting pore. IRCs are involved in numerous physiological processes of the human body and the most barium sensitive IRCs are highly expressed in all muscle types. Our purpose was correlate to the clinical outcome of acute barium poisoning in man to current knowledge on IRC function. The primary literature search was performed using Medline, Scopus and Google Scholar using search terms "barium AND poisoning"; "barium AND intoxication"; "barium AND case report" and retrieved publications from 1945 through 2012. Additional case reports were retrieved based on the reference lists of the primary hits. Duplicate publications, or publications presenting identical cases were omitted. A total of 39 case reports on acute barium poisoning containing 226 human subjects were identified for review. BaCO3 was the most frequent source and food the most frequent mode of poisoning. Patients suffered from gastrointestinal (vomiting, diarrhea), cardiovascular (arrhythmias, hypertension), neuromuscular (abnormal reflexes, paralysis), respiratory (respiratory arrest/failure) and metabolic (hypokalemia) symptoms. Severe hypokalemia (barium serum concentrations greater than or equal to 0.0025 mM. Review of the ECG outcomes demonstrated ventricular extrasystoles, ST changes and profound U-waves to be associated strongly with poisoning. Most common treatment modalities were gastric lavage, oral sulfates, potassium i.v. and cardiorespiratory support. 27 patients (12%) died from barium poisoning. Barium is a potent, non-specific inhibitor of the potassium IRC current and affects all types of muscle at

  18. Exposure to low-dose barium by drinking water causes hearing loss in mice.

    Science.gov (United States)

    Ohgami, Nobutaka; Hori, Sohjiro; Ohgami, Kyoko; Tamura, Haruka; Tsuzuki, Toyonori; Ohnuma, Shoko; Kato, Masashi

    2012-10-01

    We continuously ingest barium as a general element by drinking water and foods in our daily life. Exposure to high-dose barium (>100mg/kg/day) has been shown to cause physiological impairments. Direct administration of barium to inner ears by vascular perfusion has been shown to cause physiological impairments in inner ears. However, the toxic influence of oral exposure to low-dose barium on hearing levels has not been clarified in vivo. We analyzed the toxic influence of oral exposure to low-dose barium on hearing levels and inner ears in mice. We orally administered barium at low doses of 0.14 and 1.4 mg/kg/day to wild-type ICR mice by drinking water. The doses are equivalent to and 10-fold higher than the limit level (0.7 mg/l) of WHO health-based guidelines for drinking water, respectively. After 2-week exposure, hearing levels were measured by auditory brain stem responses and inner ears were morphologically analyzed. After 2-month exposure, tissue distribution of barium was measured by inductively coupled plasma mass spectrometry. Low-dose barium in drinking water caused severe hearing loss in mice. Inner ears including inner and outer hair cells, stria vascularis and spiral ganglion neurons showed severe degeneration. The Barium-administered group showed significantly higher levels of barium in inner ears than those in the control group, while barium levels in bone did not show a significant difference between the two groups. Barium levels in other tissues including the cerebrum, cerebellum, heart, liver and kidney were undetectably low in both groups. Our results demonstrate for the first time that low-dose barium administered by drinking water specifically distributes to inner ears resulting in severe ototoxicity with degeneration of inner ears in mice. Copyright © 2012 Elsevier Inc. All rights reserved.

  19. Surface studies of barium and barium oxide on tungsten and its application to understanding the mechanism of operation of an impregnated tungsten cathode

    Science.gov (United States)

    Forman, R.

    1976-01-01

    Surface studies have been made of multilayer and monolayer films of barium and barium oxide on a tungsten substrate. The purpose of the investigation was to synthesize the surface conditions that exist on an activated impregnated tungsten cathode and obtain a better understanding of the mechanism of operation of such cathodes. The techniques employed in these measurements were Auger spectroscopy and work-function measurements. The results of this study show that the surface of an impregnated cathode is identical to that observed for a synthesized monolayer or partial monolayer of barium on oxidized tungsten by evaluating Auger spectra and work-function measurements. Data obtained from desorption studies of barium monolayers on a tungsten substrate in conjunction with Auger and work-function results have been interpreted to show that throughout most of its life an impreganated cathode has a partial monolayer, rather than a monolayer, of barium on its surface.

  20. The effect of magnesium on partial sulphate removal from mine water as gypsum.

    Science.gov (United States)

    Tolonen, Emma-Tuulia; Rämö, Jaakko; Lassi, Ulla

    2015-08-15

    The aim of this research was to investigate the effect of magnesium on the removal efficiency of sulphate as gypsum from mine water. The precipitation conditions were simulated with MINEQL + software and the simulation results were compared with the results from laboratory jar test experiments. Both the simulation and the laboratory results showed that magnesium in the mine water was maintaining sulphate in a soluble form as magnesium sulphate (MgSO4) at pH 9.6. Thus magnesium was preventing the removal of sulphate as gypsum (CaSO4·2H2O). However, change in the lime precipitation pH from 9.6 to 12.5 resulted in magnesium hydroxide (Mg(OH)2) precipitation and improved sulphate removal. Additionally, magnesium hydroxide could act as seed crystals for gypsum precipitation or co-precipitate sulphate further enhancing the removal of sulphate from mine water. Copyright © 2015 Elsevier Ltd. All rights reserved.

  1. Electromagnetic properties of photodefinable barium ferrite polymer composites

    Directory of Open Access Journals (Sweden)

    Olusegun Sholiyi

    2014-07-01

    Full Text Available This article reports the magnetic and microwave properties of a Barium ferrite powder suspended in a polymer matrix. The sizes for Barium hexaferrite powder are 3–6 μm for coarse and 0.8–1.0 μm for the fine powder. Ratios 1:1 and 3:1 (by mass of ferrite to SU8 samples were characterized and analyzed for predicting the necessary combinations of these powders with SU8 2000 Negative photoresist. The magnetization properties of these materials were equally determined and were analyzed using Vibrating Sample Magnetometer (VSM. The Thru, Reflect, Line (TRL calibration technique was employed in determining complex relative permittivity and permeability of the powders and composites with SU8 between 26.5 and 40 GHz.

  2. The Skylab barium plasma injection experiments. I - Convection observations

    Science.gov (United States)

    Wescott, E. M.; Stenbaek-Nielsen, H. C.; Davis, T. N.; Peek, H. M.

    1976-01-01

    Two barium-plasma injection experiments were carried out during magnetically active periods in conjunction with the Skylab 3 mission. The high-explosive shaped charges were launched near dawn on November 27 and December 4, 1973, UT. In both cases, the AE index was near 400 gammas, and extensive pulsating auroras covered the sky. The first experiment, Skylab Alpha, occurred in the waning phase of a 1000-gamma substorm, and the second, Skylab Beta, occurred in the expansive phase of an 800-gamma substorm. In both, the convection was generally magnetically eastward, with 100-km-level electric fields near 40 mV/m. However, in the Alpha experiment the observed orientation of the barium flux tube fit theoretical field lines having no parallel current, but the Beta flux-tube orientation indicated a substantial upward parallel sheet current.

  3. NASA/Max Planck Institute Barium Ion Cloud Project.

    Science.gov (United States)

    Brence, W. A.; Carr, R. E.; Gerlach, J. C.; Neuss, H.

    1973-01-01

    NASA and the Max Planck Institute for Extraterrestrial Physics (MPE), Munich, Germany, conducted a cooperative experiment involving the release and study of a barium cloud at 31,500 km altitude near the equatorial plane. The release was made near local magnetic midnight on Sept. 21, 1971. The MPE-built spacecraft contained a canister of 16 kg of Ba CuO mixture, a two-axis magnetometer, and other payload instrumentation. The objectives of the experiment were to investigate the interaction of the ionized barium cloud with the ambient medium and to deduce the properties of electric fields in the proximity of the release. An overview of the project is given to briefly summarize the organization, responsibilities, objectives, instrumentation, and operational aspects of the project.

  4. Electromagnetic properties of carbon black and barium titanate composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Wang Guiqin [School of Material Science and Engineering, Dalian University of Technology, Dalian 116023 (China)], E-mail: c2b2chen@163.com; Chen Xiaodong; Duan Yuping; Liu Shunhua [School of Material Science and Engineering, Dalian University of Technology, Dalian 116023 (China)

    2008-04-24

    Nanocrystalline carbon black/barium titanate compound particle (CP) was synthesized by sol-gel method. The phase structure and morphology of compound particle were investigated by X-ray diffraction (XRD), transmission electron microscope (TEM) and Raman spectrum measurements, the electroconductivity was test by trielectrode arrangement and the precursor powder was followed by differential scanning calorimetric measurements (DSC) and thermal gravimetric analysis (TGA). In addition, the complex relative permittivity and permeability of compound particle were investigated by reflection method. The compound particle/epoxide resin composite (CP/EP) with different contents of CP were measured. The results show barium titanate crystal is tetragonal phase and its grain is oval shape with 80-100 nm which was coated by carbon black film. As electromagnetic (EM) complex permittivity, permeability and reflection loss (RL) shown that the compound particle is mainly a kind of electric and dielectric lossy materials and exhibits excellent microwave absorption performance in the X- and Ku-bands.

  5. Optimization of high-concentration endostatin formulation: Harmonization of excipients' contributions on colloidal and conformational stabilities.

    Science.gov (United States)

    Wang, Shujing; Zhang, Xinyi; Wu, Guoliang; Tian, Zhou; Qian, Feng

    2017-09-15

    Recently, increasing research efforts have been devoted into developing high-concentration protein drugs for subcutaneous injection, especially for those with short half-lives and high-dose requirement. Proteins at high concentrations normally present increased colloidal and structural instability, such as aggregation, fibrillation and gelation, which significantly challenges the high-concentration formulation development of protein drugs. Here we used endostatin, a 20kD recombinant protein, as a model drug for high-concentration formulation optimization. The colloidal and conformational stability of endostatin at high concentration of 30mg/mL were investigated in formulations containing various excipients, including saccharides (mannitol, sorbitol and sucrose), salts (ArgHCl and NaCl), and surfactants (tween 20 and 80). Protein fibrillation was characterized and semi-quantified by optical polarized light microscopy and transmission electron microscopy, and the amount of fiber formation at elevated temperature of 40°C was determined. The soluble protein aggregates were characterized by dynamic and static light scattering before and after dilution. The conformational stability were characterized by polyacrylamide gel electrophoresis, fluorescence, circular dichroism, and differential scanning calorimetry. We observed that the soluble aggregation, fibrillation and gelation, induced by conformational and colloidal instabilities of the protein solution, could be substantially optimized by using suitable stabilizers such as combinations of saccharides and surfactants; while formation of gel and soluble aggregates at high protein concentration (e.g., 30mg/mL) and elevated temperature (40°C) could be prevented by avoiding the usage of salts. It's worth emphasizing that some stabilizers, such as salts and surfactants, could show opposite contributions in conformational and colloidal stabilities of endostatin. Therefore, cautions are needed when one attempts to correlate

  6. Clinical study on high concentrations of sodium hyaluronate eye drops for moderate to severe dry eye

    OpenAIRE

    Yu-Jing Tian; Qin Zhang

    2014-01-01

    AIM: To observe the efficacy of high concentrations of sodium hyaluronate(3g/L SH)for moderate to severe dry eye. METHODS: Forty moderate to severe dry eye patients were included in the study according to the diagnosis criteria and randomized into two groups. The patients of the trial group received topical administration of high concentration sodium hyaluronate(3g/L), and those of the control group received sodium hyaluronate(1g/L)plus recombinant human epidermal growth factor. The dry eye s...

  7. Complications from radiographer-performed double contrast barium enemas

    Energy Technology Data Exchange (ETDEWEB)

    Vora, P.; Chapman, A. E-mail: anthony.chapman@leedsth.nhs.uk

    2004-04-01

    AIM: To determine the types and rates of complications encountered by radiographers when performing double contrast barium enemas (DCBE). MATERIALS AND METHODS: Seven hundred and forty-one questionnaires were posted to radiographers who had in the last 5 years attended one of the biannual barium enema training courses. RESULTS: Of 741 questionnaires posted 407 (54.9%) were returned completed. Approximately 348,000 barium enema examinations had been performed. Fifty-nine radiographers reported 89 complications, including 13 intra-peritoneal and 11 extra-peritoneal perforations. There were five deaths (mortality 1 in 70,000). Deaths resulted from two of 24 (10%) perforations, two of 45 (5%) cardiac events and one cerebrovascular accident that occurred during an examination. CONCLUSIONS: Radiographers have been regularly performing DCBEs for almost a decade. The mortality for radiographer-performed DCBE is similar to that previously reported for radiologists, although a slightly higher rate of perforation is noted and so this is an area where radiographer training should be targeted.

  8. PRELIMINARY STUDIES OF THE GASTROINTESTINAL TRACT WITH COLLOIDAL BARIUM

    Science.gov (United States)

    Windholz, Frank; Kaplan, Henry S.; Jones, Henry H.

    1951-01-01

    A stable colloidal suspension of barium sulfate has been developed and tested in roentgen examination of the gastrointestinal tract. The new material is rather distinctive in radiographic appearance and can usually be differentiated from simple barium-water mixtures by inspection of roentgenograms of the opacified stomach and small intestine. It usually affords a satisfactory demonstration of the mucosal folds of the stomach and duodenal bulb and is considerably more resistant to flocculation and precipitation by retained gastric secretions. In the small intestine, it has little tendency to undergo flocculation and fragmentation, and permits visualization of fine mucosal configurations with unusual clarity. Its motility is about the same as that of conventional suspensions. Air contrast colon examinations with the colloidal preparation exhibit a very uniform, opaque, and stable coating of the bowel wall and are more consistently satisfactory than when simple barium-water mixtures are used. ImagesFigure 1.Figure 1.Figure 1.Figure 1.Figure 2.Figure 2.Figure 3.Figure 4.Figure 4.Figure 5.Figure 5.Figure 6. PMID:14812347

  9. Effects of polyacrylic acid additive on barium sulfate particle morphology

    Energy Technology Data Exchange (ETDEWEB)

    Li, Jie; Liu, Dandan; Jiang, Hongkun; Wang, Jun; Jing, Xiaoyan; Chen, Rongrong [Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); Zhu, Wenting [Department of Gastroenterology, Harbin Medical University Cancer Hospital, Harbin 150081 (China); Han, Shihui [Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); Li, Wanyou [College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001 (China); Wei, Hao, E-mail: weihao7512@126.com [Key Laboratory of Superlight Material and Surface Technology of Ministry of Education, College of Material Science and Chemical Engineering, Harbin Engineering University, Harbin 150001 (China); College of Power and Energy Engineering, Harbin Engineering University, Harbin 150001 (China)

    2016-06-01

    In this paper, polyacrylic acid (PAA) was used as a growth modifier to control micron-sized barium sulfate particles via a simple precipitation reaction between sodium sulfate and barium chloride at ambient temperature. The barium sulfate particles were exhibited various morphologies, such as monodisperse spheres, ellipsoids, rose-like aggregates, etc. To better understand the formation mechanisms of the various morphologies of these particles, scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray diffraction (XRD) and thermo-gravimetric analysis (TGA) were employed. It was found that the PAA concentration, pH, and Ba{sup 2+} and SO{sub 4}{sup 2−} ions concentrations were the most important parameters controlling the morphology of the BaSO{sub 4} particles. These parameters affected the BaSO{sub 4} morphology by influencing the interactions between the PAA carboxyl groups and inorganic ions and the conformation change of the PAA molecular chains. Moreover, this work attempts to provide a preliminary understanding of the formation of the spherical BaSO{sub 4} particles with the randomly coiled conformation of the polymer. - Highlights: • Polyacrylic acid (PAA) was used as a growth modifier to control micron-sized BaSO{sub 4} particles. • The PAA/BaSO{sub 4} particles were exhibited various morphologies. • Provide a preliminary understanding of the formation mechanism of BaSO{sub 4} particles.

  10. Performance of Fly ash Based Geopolymer Mortars in Sulphate Solution

    Directory of Open Access Journals (Sweden)

    P. Ghosh

    2010-01-01

    Full Text Available An experimental investigation was conducted to study the performance of fly ash based geopolymer mortar specimens inMagnesium Sulphate solution. Specimens were manufactured from low calcium fly ash by activation with a mixture of SodiumHydroxide and Sodium Silicate solution and cured thermally. 10% by weight Magnesium Sulphate solution was usedto soak the specimen up to 24 weeks. Performance of the specimens was evaluated in terms of visual appearance, variationof pH of solution, change in weight, and change in compressive strength over the exposure period. White deposits occurredon the surface of specimen which was initially soft but later converted to hard crystals. pH of solution increased noticeablyduring the initial weeks which indicate migration of alkalis from mortar specimens. At the end of 24 weeks samples experiencedvery little weight gain and recorded a loss of compressive strength by up to 56%.

  11. Coastal acid sulphate soils in Poland: a review

    Directory of Open Access Journals (Sweden)

    Hulisz Piotr

    2017-03-01

    Full Text Available This paper presents the state of knowledge on coastal acid sulphate soils in Poland. The properties of these soils are closely related to the influence of brackish water from the Baltic Sea, high accumulation of organic matter and human activity. The obtained results demonstrate that the sulphide accumulation in soils refers to a relatively small areas of the Polish coastal zone with the unique and very valuable habitats. They require an adequate regulation of the water relations to avoid the risk of strong soil acidification and environmental pollution by heavy metals. Currently, there are no relevant criteria for classification of acid sulphate soil materials in the Polish Soil Classification (2011. Therefore, based on the presented data, the authors proposed to identify these features at the lower classification level (for different soil types. The criteria for the Thionic and Sulfidic qualifiers used in the WRB classification (IUSS Working Group WRB 2015 could be accepted for this purpose.

  12. Chitosan Hydrogels for Chondroitin Sulphate Controlled Release: An Analytical Characterization

    Directory of Open Access Journals (Sweden)

    Annalisa Bianchera

    2014-01-01

    Full Text Available This paper provides an analytical characterization of chitosan scaffolds obtained by freeze-gelation toward the uptake and the controlled release of chondroitin sulphate (CS, as cartilage repair agent, under different pH conditions. Scanning electron microscopy (SEM, attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR, and liquid chromatography-UV spectrophotometry (LC-UV techniques were exploited to obtain qualitative and quantitative descriptions of polymer and drug behaviour in the biomaterial. As for morphology, SEM analysis allowed the evaluation of scaffold porosity in terms of pore size and distribution both at the surface (Feret diameter 58±19 μm and on the cross section (Feret diameter 106±51 μm. LC and ATR-FTIR evidenced a pH-dependent CS loading and release behaviour, strongly highlighting the role of electrostatic forces on chitosan/chondroitin sulphate interactions.

  13. Magnesium sulphate salts and the history of water on Mars.

    Science.gov (United States)

    Vaniman, David T; Bish, David L; Chipera, Steve J; Fialips, Claire I; Carey, J William; Feldman, William C

    2004-10-07

    Recent reports of approximately 30 wt% of sulphate within saline sediments on Mars--probably occurring in hydrated form--suggest a role for sulphates in accounting for equatorial H2O observed in a global survey by the Odyssey spacecraft. Among salt hydrates likely to be present, those of the MgSO4*nH2O series have many hydration states. Here we report the exposure of several of these phases to varied temperature, pressure and humidity to constrain their possible H2O contents under martian surface conditions. We found that crystalline structure and H2O content are dependent on temperature-pressure history, that an amorphous hydrated phase with slow dehydration kinetics forms at water on Mars. However, their ease of transformation implies that salt hydrates collected on Mars will not be returned to Earth unmodified, and that accurate in situ analysis is imperative.

  14. Experimental study on performance of imitative RPC for sulphate leaching

    Directory of Open Access Journals (Sweden)

    Xu-guang Tang

    2016-03-01

    Full Text Available This paper presents a manufacturing process to make an imitative RPC material. The blend was regularly composed of cement, silica fume, and certain content of rubber powder. The granular size distribution of dry blend was optimized to reduce the porosity of set material and the imitative RPC material was characterized by high silica fume content and with very low water to binder ratio. Furthermore, fine crushed aggregate and local natural medium crude sand were used to form mineral skeleton. Properties of various reference concrete series were investigated by conducting multiple tests, including permeability and mechanical strength test, the salt solution absorption test, the accelerated sulphate attack test, etc. The results show that the imitative RPC is an environmental-friendly civil engineering material which owns favorable mechanical strength, high impermeability and qualified excellent durability in sulphate contained environment.

  15. EFFECT OF SULPHATE ON LOW-TEMPERATURE ANAEROBIC DIGESTION

    Directory of Open Access Journals (Sweden)

    Padhraig eMadden

    2014-07-01

    Full Text Available The effect of sulphate addition on the stability of, and microbial community behaviour in, low-temperature anaerobic expanded granular sludge bed-based bioreactors was investigated at 15°C. Efficient bioreactor performance was observed, with chemical oxygen demand removal efficiencies of >90%, and a mean SO42- removal rate of 98.3%. In situ methanogensis appeared unaffected at a COD:SO42- influent ratio of 8:1, and subsequently of 3:1, and was impacted marginally only when the COD: SO42- ratio was 1:2. . Specific methanogenic activity assays indicated a complex set of interactions between sulphate-reducing bacteria (SRB, methanogens and homoacetogenic bacteria. SO42- addition resulted in predominantly acetoclastic, rather than hydrogenotrophic, methanogenesis until >600 days of SO42--influenced bioreactor operation. Temporal microbial community development was monitored by denaturation gradient gel electrophoresis (DGGE of 16S rRNA genes. Fluorescence in situ hybridisations (FISH, qPCR and microsensor analysis were combined to investigate the distribution of microbial groups, and particularly SRB and methanogens, along the structure of granular biofilms. qPCR data indicated that sulphidogenic genes were present in methanogenic and sulfidogenic biofilms, indicating the potential for sulphate reduction even in bioreactors not exposed to SO42-. Although the architecture of methanogenic and sulphidogenic granules was similar, indicating the presence of SRB even in methanogenic systems, FISH with rRNA targets found that the SRB were more abundant in the sulphidogenic biofilms. Methanosaeta species were the predominant, keystone members of the archaeal community, with the complete absence of the Methanosarcina species in the experimental bioreactor by trial conclusion. Microsensor data suggested the ordered distribution of sulphate reduction and sulphide accumulation, even in methanogenic granules.

  16. Unusual pattern of leukoencephalopathy after morphine sulphate intoxication

    Energy Technology Data Exchange (ETDEWEB)

    Nanan, R.; Stockhausen, H.B. von; Petersen, B. [Children' s Hospital, University of Wuerzburg (Germany); Solymosi, L.; Warmuth-Metz, M. [Department for Neuroradiology, University of Wuerzburg (Germany)

    2000-11-01

    We report a 14-year-old girl with an unusual pattern of leukoencephalopathy after intentional intoxication with morphine sulphate tablets. Toxicological analysis showed exceedingly high levels of morphine and its metabolites. MRI disclosed a leukoencephalopathy with high signal from the centrum semiovale, corpus callosum and cerebellar white matter on T2-weighted images. These findings could be only partially explained by a hypoxic-ischaemic event; neurotoxic effects must be considered in this atypical leukoencephalopathy. (orig.)

  17. Total sulphate vs. sulphuric acid monomer in nucleation studies

    OpenAIRE

    Neitola, K.; Brus, D.; Makkonen, U.; Sipilä, M; R. L. Mauldin III; N. Sarnela; Jokinen, T; H. Lihavainen; M. Kulmala

    2014-01-01

    Sulphuric acid is known to be a key component for atmospheric nucleation. Precise determination of sulphuric acid concentration is crucial factor for prediction of nucleation rates and subsequent growth. In our study, we have noticed a substantial discrepancy between sulphuric acid monomer and total sulphate concentrations measured from the same source of sulphuric acid vapour. The discrepancy of about one to two orders of magnitude was found with similar formation rates. To...

  18. Radiation losses in microwave Ku region by conducting pyrrole/barium titanate and barium hexaferrite based nanocomposites

    Science.gov (United States)

    Kaur, Talwinder; Kumar, Sachin; Narang, S. B.; Srivastava, A. K.

    2016-12-01

    Nanocomposites of substituted barium hexaferrite and barium titanate embedded in a polymer were synthesized via emulsion polymerization. The study was performed by using X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, electron spin resonance spectroscopy, a vibrating sample magnetometer and a vector network analyzer. It is found that maximum radiation loss occur at 16.09 GHz (-14.23 dB) frequency owing to the combined effect of conducting polymer, suitable dielectric and magnetic material. This suggests that prepared material is suitable for radiation losses. Micro structural study reveals the presence of all the phases of the compounds comprises composite. Benzene ring absorption band (at 1183 cm-1) in FT-IR spectra illustrates the presence of polymer. Surface morphology reveals the presence of array of particles encapsulated by the polymer.

  19. [Environmental hygiene and comprehensive processing of copper sulphate ore].

    Science.gov (United States)

    Petrov, B A

    2004-01-01

    The modern comprehensive processing of copper-sulphate ores is based on using the fire, chemical and combined fire-and-hydrometallurgy processes. The existing schemes of comprehensive ore processing do not provide for a total utilization of the metallurgical cycles wastes due to the inherent technological and design shortcomings; besides, they are a source of environmental pollution. Contamination of the atmospheric air with discharge elements has unfavorable effects on the health condition of population; it worsens the natural body resistance and contributes (through the induction of chromosome aberrations) to a higher general morbidity and mortality due to malignant neoplasms. Health-improve measures are supported by modern achievements in the sphere of copper-sulphate ore processing technologies--they ensure the hygienic and ecological rational management and usage at all stages of the processing of raw materials and secondary products. Institutions of the territorial medical-and-ecological monitoring are the corner stones for ecological safety of persons residing in areas of comprehensive copper-and-sulphate ore processing.

  20. Physicochemical properties, cytotoxicity, and antimicrobial activity of sulphated zirconia nanoparticles

    Science.gov (United States)

    Mftah, Ae; Alhassan, Fatah H; Al-Qubaisi, Mothanna Sadiq; El Zowalaty, Mohamed Ezzat; Webster, Thomas J; Sh-eldin, Mohammed; Rasedee, Abdullah; Taufiq-Yap, Yun Hin; Rashid, Shah Samiur

    2015-01-01

    Nanoparticle sulphated zirconia with Brønsted acidic sites were prepared here by an impregnation reaction followed by calcination at 600°C for 3 hours. The characterization was completed using X-ray diffraction, thermal gravimetric analysis, Fourier transform infrared spectroscopy, Brunner-Emmett-Teller surface area measurements, scanning electron microscopy with energy dispersive X-ray spectroscopy, and transmission electron microscopy. Moreover, the anticancer and antimicrobial effects were investigated for the first time. This study showed for the first time that the exposure of cancer cells to sulphated zirconia nanoparticles (3.9–1,000 μg/mL for 24 hours) resulted in a dose-dependent inhibition of cell growth, as determined by (4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assays. Similar promising results were observed for reducing bacteria functions. In this manner, this study demonstrated that sulphated zirconia nanoparticles with Brønsted acidic sites should be further studied for a wide range of anticancer and antibacterial applications. PMID:25632233

  1. Preoperative medication with oral morphine sulphate and postoperative pain.

    Science.gov (United States)

    Borracci, T; Cappellini, I; Campiglia, L; Picciafuochi, F; Berti, J; Consales, G; De Gaudio, A R

    2013-05-01

    The administration of an analgesic drug prior to nociceptive surgical stimulus could result in a better postoperative pain management. The aim of this study was to evaluate the effect of preoperative oral morphine sulphate on postoperative pain relief. Sixty patients undergoing major abdominal surgery were randomly assigned to premedication with 0.5 mg/kg oral morphine sulphate (oral morphine group) or 0.05 mg/kg oral midazolam (active placebo group). Primary outcome was efficacy of morphine premedication on opioid administration of IntraVenous Patient Controlled Analgesia (IVPCA) doses, at 4, 24, and 48 hours after completion of surgery and reducing static and dynamic visual analogue scale (sVAS and dVAS) scores. Secondary outcome was the time needed for the recovery of canalization of the gastro-intestinal tract. It was also evaluated fentanyl intraoperative consumption. Statistical analysis was performed by linear regression and student t test. Values of Poral morphine group compared to the active placebo group (Poral morphine group compared to the active placebo group at all assessment times (Poral morphine sulphate produces better postoperative pain control and has an opioid-sparing effect without delaying gastrointestinal canalization time.

  2. Effects of powdered versus liquid barium on the viscosity of fluids used in modified swallow studies

    Energy Technology Data Exchange (ETDEWEB)

    Baron, J.; Alexander, T. [Univ. of Alberta, Dept. of Radiology, Edmonton, Alberta (Canada)

    2003-06-01

    To determine if the viscosity of thickened juice mixtures used in modified barium swallow studies significantly changes with the addition of powdered barium. We also describe a test formulation created using liquid barium, which has a negligible effect on juice viscosity. The viscosities of water and standardized honey- and nectar-consistency juices mixed with different amounts of powdered barium were measured by timing the laminar flow of a given initial hydrostatic head of fluid under gravity though an orifice of fixed diameter. Standardized juices were then mixed with a liquid formulation of barium and with measured quantities of water to produce viscosities that more closely equated with those of the standardized juices. With the addition of powdered barium, viscosity increased in all fluids, most markedly with the nectar-consistency juice. Liquid barium formulations maintained the viscosities of the original thickened juices. Rendering juices radio-opaque with barium powder results in dramatic increases in the viscosity of the resulting mixture and compromises diagnostic accuracy. Liquid barium preparations have the advantage that they can be rapidly and accurately dispensed by syringe, and their use does not significantly increase the viscosity of the preparation. (author)

  3. Sensitivity of single contrast barium enema with regard to colorectal disease as diagnosed by colonoscopy

    Energy Technology Data Exchange (ETDEWEB)

    Kaude, J.V.; Harty, R.F.

    1982-11-01

    The results of single contrast barium enema were retrospectively correlated with colonoscopically diagnosed colorectal disease in 54 patients (75 lesions). Altogether 66 lesions (88%) were correctly diagnosed. The sensitivity of barium enema for polyps was 81% (26/32). There were three perceptive errors and three polyps 5 mm or less in size were not demonstrated by barium enema. Twenty-nine cases of inflammatory disorders were all correctly diagnosed. One of 12 malignancies was missed by perceptive error. In two cases with vascular malformations the barium enema was normal. 4/9 (44%) of missed lesions were perceptive errors and could have been probably avoided by a second independent reading of films.

  4. Research on Catalytic Oxidation Pretreatment of Organic Pesticide Wastewater with High Concentration

    Directory of Open Access Journals (Sweden)

    Jiang Jing

    2016-01-01

    Full Text Available Pesticide wastewater has the characteristics of high organic pollutant, high concentration, deep color and high toxicity, which has become difficult to treat the organic wastewater with high concentration at home and abroad. This article uses three methods of US(ultrasonic, Fenton(Fe2+&H2O2and combination of US&Fenton were used in the comparative research on the treatment of organic pesticide wastewater with high concentration. Experimental conditions: time of 130 min, ultrasonic power of 280W, frequency of 418kHz, pH value of 3.5, H2O2concentration of 0.3mol/l; dosing mode: two thirds was added at 0 min, the rest one third was added at 65 min. The results showed that the treatment effect of the combination of US&Fenton was significantly better than that of independent US and independent Fenton; after the treatment on the organic pesticide wastewater with high concentration, the degradation rate of COD reached 85%, the chromaticity degradation rate reached 99%; the ratio of COD/BOD was about 1.4, with better biodegradability, which has provided a good condition for the subsequent biochemical treatment. Solved the problem of pesticide wastewater was difficult and expensive to degradation.

  5. High-concentration-gradient dispersion in porous media : experiments, analysis and approximations

    NARCIS (Netherlands)

    R.J. Schotting; H. Moser; S.M. Hassanizadeh

    1997-01-01

    textabstractVarious experimental and theoretical studies have shown that Fick's law, based on the assumption of a linear relation between solute dispersive mass flux and concentration gradient, is not valid when high concentration gradients are encountered in a porous medium. The value of the

  6. Aichi virus shedding in high concentrations in patients with acute diarrhea.

    Science.gov (United States)

    Drexler, Jan Felix; Baumgarte, Sigrid; de Souza Luna, Luciano Kleber; Eschbach-Bludau, Monika; Lukashev, Alexander N; Drosten, Christian

    2011-08-01

    We assessed Aichi virus shedding in patients with gastroenteritis and negative test results for other viral and bacterial infections. High concentrations of up to 1.32 × 1012 RNA copies/g stool were found in 10 (2.0%) of 499 outpatients sampled in northern Germany, 2004. These data substantiate Aichi virus pathogenicity in humans.

  7. [Short gel method for pretreatment of protein samples with high concentration of detergent].

    Science.gov (United States)

    Ma, Shouzhi; Zhang, Tao; Zhai, Linhui; Sun, Yulin; Xu, Ping; Zhao, Xiaohang

    2014-09-01

    In proteomic research, to improve protein solubility of membrane proteins and nuclear proteins, buffers containing high concentration of detergent, such as 4% SDS, were widely used. However, high concentration of detergent might severely interfere with the downstream proteomic analysis, including protein quantitation and trypsin digestion. To improve the proteomic compatibility of buffers with high concentration of detergent, we used short gel method to pretreat buffers containing detergent. Protein samples were first separated by a short (2-2.5 mm) SDS-PAGE electrophoresis, and proteins were quantitated by comparing with bovine serum albumin standards via optical density analysis. The gel was then cut and peptides were recovered using in-gel digestion. The quantitative linearity range of this method was 1 to 8 μg. The quantitation was accurate and reproducible. After short gel analysis, recovered peptides generated high mass spectrometry signals. In conclusion, short gel method eliminated the interference of high concentration detergent in the proteomics analysis, and it was suitable for protein samples' pretreatment, and was worth to apply in proteomic research.

  8. Simultaneous measurements of glutathione and activated sulphate (PAPS) synthesis rates and the effects of selective inhibition of glutathione conjugation or sulphation of acetaminophen

    DEFF Research Database (Denmark)

    Dalhoff, K; Poulsen, H E

    1993-01-01

    The aim of the present study was to examine the effects of the hepatotoxic drug acetaminophen (AA) on the synthesis rates of glutathione (GSH), activated sulphate (PAPS; adenosine 3'-phosphate 5'-phosphosulphate) and the AA metabolites AA-GSH and AA-sulphate after selective inhibition of GSH...

  9. Radiation losses in microwave K{sub u} region by conducting pyrrole/barium titanate and barium hexaferrite based nanocomposites

    Energy Technology Data Exchange (ETDEWEB)

    Kaur, Talwinder [Department of Physics, Lovely Professional University, Phagwara 144411 (India); Kumar, Sachin [Department of Chemistry, Guru Nanak Dev University, Amritsar 143005 (India); Narang, S.B. [Department of Electronics Technology, Guru Nanak Dev University, Amritsar 143005 (India); Srivastava, A.K., E-mail: srivastava_phy@yahoo.co.in [Department of Physics, Lovely Professional University, Phagwara 144411 (India)

    2016-12-15

    Nanocomposites of substituted barium hexaferrite and barium titanate embedded in a polymer were synthesized via emulsion polymerization. The study was performed by using X-ray diffraction, Fourier transform infrared spectroscopy, transmission electron microscopy, electron spin resonance spectroscopy, a vibrating sample magnetometer and a vector network analyzer. It is found that maximum radiation loss occur at 16.09 GHz (−14.23 dB) frequency owing to the combined effect of conducting polymer, suitable dielectric and magnetic material. This suggests that prepared material is suitable for radiation losses. Micro structural study reveals the presence of all the phases of the compounds comprises composite. Benzene ring absorption band (at 1183 cm{sup −1}) in FT-IR spectra illustrates the presence of polymer. Surface morphology reveals the presence of array of particles encapsulated by the polymer. - Highlights: • Composites having polymer, barium titanate and hexaferrite have been successfully prepared. • Effective radiation absorption and losses have been achieved. • Magnetic properties have made an impact on shielding effectiveness.

  10. A comparison of glycosaminoglycan distributions, keratan sulphate sulphation patterns and collagen fibril architecture from central to peripheral regions of the bovine cornea.

    Science.gov (United States)

    Ho, Leona T Y; Harris, Anthony M; Tanioka, Hidetoshi; Yagi, Naoto; Kinoshita, Shigeru; Caterson, Bruce; Quantock, Andrew J; Young, Robert D; Meek, Keith M

    2014-09-01

    This study investigated changes in collagen fibril architecture and the sulphation status of keratan sulphate (KS) glycosaminoglycan (GAG) epitopes from central to peripheral corneal regions. Freshly excised adult bovine corneal tissue was examined as a function of radial position from the centre of the cornea outwards. Corneal thickness, tissue hydration, hydroxyproline content, and the total amount of sulphated GAG were all measured. High and low-sulphated epitopes of keratan sulphate were studied by immunohistochemistry and quantified by ELISA. Chondroitin sulphate (CS) and dermatan sulphate (DS) distributions were observed by immunohistochemistry following specific enzyme digestions. Electron microscopy and X-ray fibre diffraction were used to ascertain collagen fibril architecture. The bovine cornea was 1021±5.42 μm thick at its outer periphery, defined as 9-12 mm from the corneal centre, compared to 844±8.10 μm at the centre. The outer periphery of the cornea was marginally, but not significantly, more hydrated than the centre (H=4.3 vs. H=3.7), and was more abundant in hydroxyproline (0.12 vs. 0.06 mg/mg dry weight of cornea). DMMB assays indicated no change in the total amount of sulphated GAG across the cornea. Immunohistochemistry revealed the presence of both high- and low-sulphated epitopes of KS, as well as DS, throughout the cornea, and CS only in the peripheral cornea before the limbus. Quantification by ELISA, disclosed that although both high- and low-sulphated KS remained constant throughout stromal depth at different radial positions, high-sulphated epitopes remained constant from the corneal centre to outer-periphery, whereas low-sulphated epitopes increased significantly. Both small angle X-ray diffraction and TEM analysis revealed that collagen fibril diameter remained relatively constant until the outer periphery was reached, after which fibrils became more widely spaced (from small angle x-ray diffraction analysis) and of larger diameter

  11. The microbial communities and potential greenhouse gas production in boreal acid sulphate, non-acid sulphate, and reedy sulphidic soils

    Czech Academy of Sciences Publication Activity Database

    Šimek, Miloslav; Virtanen, S.; Simojoki, A.; Chroňáková, Alica; Elhottová, Dana; Krištůfek, Václav; Yli-Halla, M.

    2014-01-01

    Roč. 466, January (2014), s. 663-672 ISSN 0048-9697 R&D Projects: GA ČR GA526/09/1570; GA MŠk LC06066 Grant - others:GAJU(CZ) GAJU 138/2010/P Institutional support: RVO:60077344 Keywords : acid sulphate soil * carbon * CARD-FISH * microorganisms * nitrogen * PLFA Subject RIV: EE - Microbiology, Virology Impact factor: 4.099, year: 2014

  12. Sulphate reduction and vertical distribution of sulphate-reducing bacteria quantified by rRNA slot-blot hybridization in a coastal marine sediment

    DEFF Research Database (Denmark)

    Sahm, K.; MacGregor, BJ; Jørgensen, BB

    1999-01-01

    In the past, enumeration of sulphate-reducing bacteria (SRB) by cultivation-based methods generally contradicted measurements of sulphate reduction, suggesting unrealistically high respiration rates per cell. Here, we report evidence that quantification of SRB rRNA by slot-blot hybridization...... between 18% and 25% to the prokaryotic rRNA pool. The dominant SRB were related to complete oxidizing genera (Desulphococcus, Desulphosarcina and Desulphobacterium), while Desulpho-bacter could not be detected. The vertical profile and quantity of rRNA from SRB was compared with sulphate reduction rates......, directly above the sulphate reduction maximum. Cell numbers calculated by converting the relative contribution of SRB rRNA to the percentage of DAPI-stained cells indicated a population size for SRB of 2.4-6.1 x 10(8) cells cm(-3) wet sediment. Cellular sulphate reduction rates calculated on the basis...

  13. Sulphate aerosol size distributions at Mumbai, India, during the INDOEX-FFP (1998)

    Science.gov (United States)

    Venkataraman, Chandra; Sinha, Prashant; Bammi, Sachin

    Sulphate size distributions were measured at the coastal station of Mumbai (formerly Bombay) through 1998, during the Indian ocean experiment (INDOEX) first field phase (FFP), to fill current gaps in size-resolved aerosol chemical composition data. The paper examines meteorological, seasonal and source-contribution effects on sulphate aerosol and discusses potential effects of sulphate on regional climate. Sulphate size-distributions were largely trimodal with a condensation mode (mass median aerodynamic diameter or MMAD 0.6 μm), a droplet mode (MMAD 1.9-2.4 μm) and a coarse mode (MMAD 5 μm). Condensation mode sulphate mass-fractions were highest in winter, consistent with the high meteorological potential for gas-to-particle conversion along with low relative humidity (RH). The droplet mode concentrations and MMADs were larger in the pre-monsoon and winter than in monsoon, implying sulphate predominance in larger sized particles within this mode. In these seasons the high RH, and consequently greater aerosol water in the droplet mode, would favour aerosol-phase partitioning and reactions of SO 2. Coarse mode sulphate concentrations were lowest in the monsoon, when continental contribution to sulphate was low and washout was efficient. In winter and pre-monsoon, coarse mode sulphate concentrations were somewhat higher, likely from SO 2 gas-to-particle conversion. Low daytime sulphate concentrations with a large coarse fraction, along with largely onshore winds, indicated marine aerosol predominance. High nighttime sulphate concentrations and a coincident large fine fraction indicated contributions from anthropogenic/industrial sources or from gas-to-particle conversion. Monthly mean sulphate concentrations increased with increasing SO 2 concentrations, RH and easterly wind direction, indicating the importance of gas-to-particle conversion and industrial sources located to the east. Atmospheric chemistry effects on sulphate size distributions in Mumbai, indicated

  14. Microwave Absorption Properties of Double-Layer RADAR Absorbing Materials Based on Doped Barium Hexaferrite/TiO2/Conducting Carbon Black

    National Research Council Canada - National Science Library

    Sukanta Das; G. C. Nayak; S. K. Sahu; P. C. Routray; A. K. Roy; H. Baskey

    2014-01-01

      In this report, we demonstrate microwave absorption properties of barium hexaferrite, doped barium hexaferrite, titanium dioxide and conducting carbon black based RADAR absorbing material for stealth application...

  15. CHANGES IN TURKEY SPERMATOZOZA MOTILITY PARAMETERS AFTER ADDITION OF COPPER SULPHATE IN VITRO

    Directory of Open Access Journals (Sweden)

    Tomáš Slanina

    2015-02-01

    Full Text Available Copper as essential trace element is obligatory in many biological processes. Nevertheless higher concentrations of this metal are highly toxic for organisms at different levels and of course for spermatozoa. The aim of present work was to examine impact of copper sulphate on turkey spermatozoa motility parameters (line Big 6 during in vitro incubation at 41°C. Four concentration of CuSO4: M1 – 6.25 μg.ml-1; M2 – 12.5 μg.ml-1; M3 – 25.0 μg.ml-1; M4 – 50.0 μg.ml-1 were investigated. The motility parameters were evaluated using the Computer Assisted Semen Analyzer system (program Sperm Vision® at four time periods: 0, 30, 60 and 90 minutes. Immediately at the beginning of incubation significantly lower values of progressive motility were detected in samples M3 (p<0.01 and M4 (p<0.001 compared to the control. Significantly lower values of motility and progressive motility were detected in samples M2 (p<0.05, M3 and M4 (p<0.001 in comparison to control after 30 minutes of incubation. In the samples M3 and M4 also significant decrease (p<0.05, p<0.01, p<0.001 of velocity curved line, amplitude of lateral head displacement and beat cross frequency were observed. In the sample M1 significant increase of velocity curved line (p<0.001 and amplitude of lateral head displacement (p<0.05 in comparison to control at the time 0 was detected. Obtained data demonstrate that the high concentration of copper sulphate (from 12.5 μg.ml-1 decreases motility parameters of turkey spermatozoa during in vitro incubation at 41°C. The results also indicate that the addition of copper less than 6.25 μg.ml-1 to the culture medium could be beneficial for the motility of turkey spermatozoa.

  16. A review of the health impacts of barium from natural and anthropogenic exposure.

    Science.gov (United States)

    Kravchenko, Julia; Darrah, Thomas H; Miller, Richard K; Lyerly, H Kim; Vengosh, Avner

    2014-08-01

    There is an increasing public awareness of the relatively new and expanded industrial barium uses which are potential sources of human exposure (e.g., a shale gas development that causes an increased awareness of environmental exposures to barium). However, absorption of barium in exposed humans and a full spectrum of its health effects, especially among chronically exposed to moderate and low doses of barium populations, remain unclear. We suggest a systematic literature review (from 1875 to 2014) on environmental distribution of barium, its bioaccumulation, and potential and proven health impacts (in animal models and humans) to provide the information that can be used for optimization of future experimental and epidemiological studies and developing of mitigative and preventive strategies to minimize negative health effects in exposed populations. The potential health effects of barium exposure are largely based on animal studies, while epidemiological data for humans, specifically for chronic low-level exposures, are sparse. The reported health effects include cardiovascular and kidney diseases, metabolic, neurological, and mental disorders. Age, race, dietary patterns, behavioral risks (e.g., smoking), use of medications (those that interfere with absorbed barium in human organism), and specific physiological status (e.g., pregnancy) can modify barium effects on human health. Identifying, evaluating, and predicting the health effects of chronic low-level and moderate-level barium exposures in humans is challenging: Future research is needed to develop an understanding of barium bioaccumulation in order to mitigate its potential health impacts in various exposured populations. Further, while occupationally exposed at-risk populations exist, it is also important to identify potentially vulnerable subgroups among non-occupationally exposed populations (e.g., elderly, pregnant women, children) who are at higher risk of barium exposure from drinking water and food.

  17. Simplified assessment of segmental gastrointestinal transit time with orally small amount of barium.

    Science.gov (United States)

    Yuan, Weitang; Zhang, Zhiyong; Liu, Jinbo; Li, Zhen; Song, Junmin; Wu, Changcai; Wang, Guixian

    2012-09-01

    To determine the effectiveness and advantage of small amount of barium in the measurement of gastrointestinal transmission function in comparison with radio-opaque pallets. Protocal 1: 8 healthy volunteers (male 6, female 2) with average age 40±6.1 were subjected to the examination of radio-opaque pellets and small amount of barium with the interval of 1 week. Protocol 2: 30 healthy volunteers in group 1 (male 8, female 22) with average age 42.5±8.1 and 50 patients with chronic functional constipation in group 2 (male 11, female 39) with average age 45.7±7.8 were subjected to the small amount of barium examination. The small amount of barium was made by 30 g barium dissolved in 200 ml breakfast. After taking breakfast which contains barium, objectives were followed with abdominal X-ray at 4, 8, 12, 24, 48, 72, 96 h until the barium was evacuated totally. Small amount of barium presented actual chyme or stool transit. The transit time of radio-opaque pallets through the whole gastrointestinal tract was significantly shorter than that of barium (37±8 h vs. 47±10 h, Pvolunteers. Transit times in individual gastrointestinal segments were also recorded by using small amount of barium, which allowed identifying the subtypes of constipation. The small amount barium examination is a convenient and low cost method to provide the most useful and reliable information on the transmission function of different gastrointestinal segments and able to classify the subtypes of slow transit constipation. Copyright © 2011 Elsevier Ireland Ltd. All rights reserved.

  18. Assessment of the radium-barium co-precipitation and its potential influence on the solubility of Ra in the near-field

    Energy Technology Data Exchange (ETDEWEB)

    Grandia, Fidel; Merino, Joan; Bruno, Jordi (Amphos XXI Consulting S.L., Barcelona (Spain))

    2008-08-15

    Radium 226 is one of the main contributors to radiological dose in some of the scenarios contemplated in the recent SR Can safety assessment. The relative contribution of the 226Ra dose is clearly dependent on the source term value for this radionuclide, which is directly connected to its solubility behaviour. Most of the source term calculations performed for this radionuclide pessimistically assume that its solubility is controlled by the individual solubility of RaSO{sub 4}(s), the most insoluble phase under near field conditions, while the abundant information from early radiochemical research, natural system studies and anthropogenic systems would indicate that Ra(II) is mainly associated to BaSO{sub 4}(s) precipitation. In this work we have investigated the extensive literature concerning the mechanisms and processes controlling the co-precipitation/solid solution formation behaviour of the Ra(II)/Ba(II) sulphate system. We have also established the necessary thermodynamic moles to model the solubility behaviour in the vicinity of the spent fuel system. Calculations using an ATM-104 fuel at 40 MWd/kg U show that barium and radium inventories per canister progressively grow with time after deposition, most of the barium is produced in the initial 500 years. In the unlikely event of a contact of sulphate-containing groundwaters with the fuel, Ba(II) will precipitate as BaSO{sub 4}(s). The production of 226Ra reaches its peak some 300,000 years after deposition. This substantial time gap indicates that most of the BaSO{sub 4}(s) will be present when and if radium is released from the fuel, even if some Ra(II) and Ba(II) will be released contemporaneously. Two potential scenarios have been addressed from the mechanistic point of view. In the event of a simultaneous release of Ra with Ba, the former will be readily incorporated into the precipitating BaSO{sub 4} to build a Ra Ba sulphate solid solution. All the existing evidence indicates, that in this case, the

  19. Strategies for the production of high concentrations of bioethanol from seaweeds

    Science.gov (United States)

    Yanagisawa, Mitsunori; Kawai, Shigeyuki; Murata, Kousaku

    2013-01-01

    Bioethanol has attracted attention as an alternative to petroleum-derived fuel. Seaweeds have been proposed as some of the most promising raw materials for bioethanol production because they have several advantages over lignocellulosic biomass. However, because seaweeds contain low contents of glucans, i.e., polysaccharides composed of glucose, the conversion of only the glucans from seaweed is not sufficient to produce high concentrations of ethanol. Therefore, it is also necessary to produce ethanol from other specific carbohydrate components of seaweeds, including sulfated polysaccharides, mannitol, alginate, agar and carrageenan. This review summarizes the current state of research on the production of ethanol from seaweed carbohydrates for which the conversion of carbohydrates to sugars is a key step and makes comparisons with the production of ethanol from lignocellulosic biomass. This review provides valuable information necessary for the production of high concentrations of ethanol from seaweeds. PMID:23314751

  20. Low concentrations of methamphetamine detectable in urine in the presence of high concentrations of amphetamine.

    Science.gov (United States)

    Jemionek, John F; Addison, Joseph; Past, Marilyn R

    2009-04-01

    Twenty-two urine specimens reported by military drug-testing laboratories for the presence of high concentrations of amphetamine only were subject to further analysis for the presence of methamphetamine. The 22 urine specimens had concentrations of amphetamine in the range of 28,028 to 241,142 ng/mL. The specimens were also assayed for the respective isomeric ratio of d (S) and l (R) amphetamine and methamphetamine. The results suggest that urine specimens containing high concentrations of amphetamine in which the urine concentration ratio of methamphetamine to amphetamine is less than 0.5% with similar isomeric distribution of d-(S) and l-(R) amphetamine and methamphetamine, respectively, may not necessarily indicate polydrug use.

  1. Sulphate aerosol size distributions at Mumbai, India, during the INDOEX-FFP (1998)

    Energy Technology Data Exchange (ETDEWEB)

    Venkataraman, C.; Sinha, P.; Bammi, S. [Indian Inst. of Technology, Bombay (India). Centre for Environmental Science and Engineering

    2001-05-01

    Sulphate size distributions were measured at the coastal station of Mumbai (formerly Bombay) through 1998, during the Indian ocean experiment (INDOEX) first field phase (FFP), to fill current gaps in size-resolved aerosol chemical composition data. The paper examines meteorological, seasonal and source-contribution effects on sulphate aerosol and discusses potential effects of sulphate on regional climate. Sulphate size-distributions were largely trimodal with a condensation mode (mass median aerodynamic diameter or MMAD 0.6{mu}m), a droplet mode (MMAD 1.9-2.4{mu}m) and a coarse mode (MMAD 5{mu}m). Condensation mode sulphate mass-fractions were highest in winter, consistent with the high meteorological potential for gas-to-particle conversion along with low relative humidity (RH). The droplet mode concentrations and MMADs were larger in the pre-monsoon and winter than in monsoon, implying predominance in larger sized particles within this mode. In these seasons the high RH, and consequently aerosol water in the droplet mode, would favour aerosol-phase partitioning and reactions of SO{sub 2}. Coarse mode sulphate concentrations were lowest in the monsoon, when continental contribution to sulphate was low and washout was efficient. In winter and pre-monsoon, coarse mode sulphate concentrations were somewhat higher, likely from SO{sub 2} gas-to-particle conversion. Low daytime sulphate concentrations with a large coarse fraction, along with largely onshore winds, indicated marine aerosol predominance. High nighttime sulphate concentrations and a coincident large fine fraction indicated contributions from anthropogenic/industrial sources or from gas-to-particle conversion. Monthly mean sulphate concentrations increased with increasing SO{sub 2} concentrations, RH and easterly wind direction, indicating the importance of gas-to-particle conversion and industrial sources located to the east. Atmospheric chemistry effects on sulphate size distributions in Mumbai

  2. A selective electrocatalyst?based direct methanol fuel cell operated at high concentrations of methanol

    OpenAIRE

    FENG, Yan; Liu, Hui; Yang, Jun

    2017-01-01

    Owing to the serious crossover of methanol from the anode to the cathode through the polymer electrolyte membrane, direct methanol fuel cells (DMFCs) usually use dilute methanol solutions as fuel. However, the use of high-concentration methanol is highly demanded to improve the energy density of a DMFC system. Instead of the conventional strategies (for example, improving the fuel-feed system, membrane development, modification of electrode, and water management), we demonstrate the use of se...

  3. Aggregation of Normal and Sickle Hemoglobin in High Concentration Phosphate Buffer

    OpenAIRE

    Chen, Kejing; Ballas, Samir K.; Hantgan, Roy R.; Kim-Shapiro, Daniel B.

    2004-01-01

    Sickle cell disease is caused by a mutant form of hemoglobin, hemoglobin S, that polymerizes under hypoxic conditions. The extent and mechanism of polymerization are thus the subject of many studies of the pathophysiology of the disease and potential treatment strategies. To facilitate such studies, a model system using high concentration phosphate buffer (1.5 M–1.8 M) has been developed. To properly interpret results from studies using this model it is important to understand the similaritie...

  4. Photonic sensing in highly concentrated biotechnical processes by photon density wave spectroscopy

    Science.gov (United States)

    Hass, Roland; Sandmann, Michael; Reich, Oliver

    2017-04-01

    Photon Density Wave (PDW) spectroscopy is introduced as a new approach for photonic sensing in highly concentrated biotechnical processes. It independently quantifies the absorption and reduced scattering coefficient calibration-free and as a function of time, thus describing the optical properties in the vis/NIR range of the biomaterial during their processing. As examples of industrial relevance, enzymatic milk coagulation, beer mashing, and algae cultivation in photo bioreactors are discussed.

  5. Picosecond pulse radiolysis of direct and indirect radiolytic effects in highly concentrated halide aqueous solutions.

    Science.gov (United States)

    Balcerzyk, Anna; Schmidhammer, Uli; El Omar, Abdel Karim; Jeunesse, Pierre; Larbre, Jean-Philippe; Mostafavi, Mehran

    2011-08-25

    Recently we measured the amount of the single product, Br(3)(-), of steady-state radiolysis of highly concentrated Br(-) aqueous solutions, and we showed the effect of the direct ionization of Br(-) on the yield of Br(3)(-). Here, we report the first picosecond pulse-probe radiolysis measurements of ionization of highly concentrated Br(-) and Cl(-) aqueous solutions to describe the oxidation mechanism of the halide anions. The transient absorption spectra are reported from 350 to 750 nm on the picosecond range for halide solutions at different concentrations. In the highly concentrated halide solutions, we observed that, due to the presence of Na(+), the absorption band of the solvated electron is shifted to shorter wavelengths, but its decay, taking place during the spur reactions, is not affected within the first 4 ns. The kinetic measurements in the UV reveal the direct ionization of halide ions. The analysis of pulse-probe measurements show that after the electron pulse, the main reactions in solutions containing 1 M of Cl(-) and 2 M of Br(-) are the formation of ClOH(-•) and BrOH(-•), respectively. In contrast, in highly concentrated halide solutions, containing 5 M of Cl(-) and 6 M of Br(-), mainly Cl(2)(-•) and Br(2)(-•) are formed within the electron pulse without formation of ClOH(-•) and BrOH(-•). The results suggest that, not only Br(-) and Cl(-) are directly ionized into Br(•) and Cl(•) by the electron pulse, the halide atoms can also be rapidly generated through the reactions initiated by excitation and ionization of water, such as the prompt oxidation by the hole, H(2)O(+•), generated in the coordination sphere of the anion. © 2011 American Chemical Society

  6. Protein aggregation under high concentration/density state during chromatographic and ultrafiltration processes.

    Science.gov (United States)

    Arakawa, Tsutomu; Ejima, Daisuke; Akuta, Teruo

    2017-02-01

    Local transient high protein concentration or high density condition can occur during processing of protein solutions. Typical examples are saturated binding of proteins during column chromatography and high protein concentration on the semi-permeable membrane during ultrafiltration. Both column chromatography and ultrafiltration are fundamental technologies, specially for production of pharmaceutical proteins. We summarize here our experiences related to such high concentration conditions. Copyright © 2016 Elsevier B.V. All rights reserved.

  7. Influence of chemical or physical catalysts on high concentration bleaching agents.

    Science.gov (United States)

    Lima, Débora Alves Nunes Leite; Aguiar, Flávio Henrique Baggio; Liporoni, Priscila C Suzy; Munin, Egberto; Ambrosano, Gláucia Maria Bovi; Lovadino, José Roberto

    2011-01-01

    The aim of this in vitro study was to evaluate the bleaching efficacy of high concentration bleaching agents activated by chemical or physical catalysts. This study was divided into two parts. Part 1 evaluated the efficacy of tooth whitening after treatment with 35% hydrogen peroxide (Whiteness HP Maxx) that was activated by different light-curing units: halogen lamp (conventional and bleach mode) (Optilux 501C, Demetron/Kerr), LED first generation (Ultrablue IV, DMC), LED/diode laser (Ultrablue IV, DMC), LED second generation (Bluephase 16i, Ivoclar Vivadent), and no light source (control group). Part 2 provided an analysis of the effect of chemical and physical catalysts on high concentration bleaching agents: 35% hydrogen peroxide (Whiteness HP Maxx) + 20% sodium hydroxide; 35% hydrogen peroxide + 7% sodium bicarbonate; 38% hydrogen peroxide (Opalescence Xtra Boost); 35% hydrogen peroxide + halogen lamp; 35% hydrogen peroxide + 20% sodium hydroxide + halogen lamp; 35% hydrogen peroxide + 7% sodium bicarbonate + halogen lamp; 38% hydrogen peroxide + halogen lamp; and 35% hydrogen peroxide. Blocks obtained from human molars were randomly divided into groups (n = 5) in accordance with bleaching treatments. The efficacy of bleaching was measured using a spectrophotometer. Three bleaching sessions were performed. The results were submitted to ANOVA followed by the Tukey test (5%). For both parts of the study, activated vs. non-activated bleaching did not differ significantly for all sessions tested. Activating systems did not improve the whitening effectiveness of high concentration bleaching agents.

  8. Application of Hydrothermal Treatment to High Concentrated Sewage Sludge for Anaerobic Digestion Process

    Directory of Open Access Journals (Sweden)

    M. Orikawa

    2013-10-01

    Full Text Available Tomato and seaweed were produced by utilizing CO2 and heat discharged from power generation using biogas in Toyogawa biomass park, Japan. The biogas was obtained by anaerobic digestion with hydrothermal treatment. The hydrothermal treatment was applied to the high concentrated sewage sludge (22 % total solids (TS dewatered sludge. The purpose of this study is to clarify the effect of hydrothermal treatment on the qualities of high concentrated sewage sludge, by analyzing particulate organic carbon (POC and dissolved organic carbon (DOC. The hydrothermal treatment was investigated under 10-60 min of treatment time, 180-200 °C of temperature, 10-22 %-TS of sewage sludge concentration. The results showed that the DOC in each conditions increased through hydrothermal treatment. The highest DOC obtained was 67 % of total carbon concentration, when the temperature was 180 °C, treatment time was 60 min and sewage sludge concentration was 10 %-TS. Furthermore, the viscosity of treated sewage sludge was decreased by hydrothermal treatment. In batch anaerobic digestion test, methane gas production was confirmed. In addition, this study evaluated the energy balance of this system. Thus, the results of this study indicated that the possibility of application of hydrothermal treatment to high concentrated sewage sludge for anaerobic digestion process. Keywords: anaerobic reaction, hydrothermal treatment, sewage sludge, solubilization

  9. A selective electrocatalyst–based direct methanol fuel cell operated at high concentrations of methanol

    Science.gov (United States)

    Feng, Yan; Liu, Hui; Yang, Jun

    2017-01-01

    Owing to the serious crossover of methanol from the anode to the cathode through the polymer electrolyte membrane, direct methanol fuel cells (DMFCs) usually use dilute methanol solutions as fuel. However, the use of high-concentration methanol is highly demanded to improve the energy density of a DMFC system. Instead of the conventional strategies (for example, improving the fuel-feed system, membrane development, modification of electrode, and water management), we demonstrate the use of selective electrocatalysts to run a DMFC at high concentrations of methanol. In particular, at an operating temperature of 80°C, the as-fabricated DMFC with core-shell-shell Au@Ag2S@Pt nanocomposites at the anode and core-shell Au@Pd nanoparticles at the cathode produces a maximum power density of 89.7 mW cm−2 at a methanol feed concentration of 10 M and maintains good performance at a methanol concentration of up to 15 M. The high selectivity of the electrocatalysts achieved through structural construction accounts for the successful operation of the DMFC at high concentrations of methanol. PMID:28695199

  10. A selective electrocatalyst-based direct methanol fuel cell operated at high concentrations of methanol.

    Science.gov (United States)

    Feng, Yan; Liu, Hui; Yang, Jun

    2017-06-01

    Owing to the serious crossover of methanol from the anode to the cathode through the polymer electrolyte membrane, direct methanol fuel cells (DMFCs) usually use dilute methanol solutions as fuel. However, the use of high-concentration methanol is highly demanded to improve the energy density of a DMFC system. Instead of the conventional strategies (for example, improving the fuel-feed system, membrane development, modification of electrode, and water management), we demonstrate the use of selective electrocatalysts to run a DMFC at high concentrations of methanol. In particular, at an operating temperature of 80°C, the as-fabricated DMFC with core-shell-shell Au@Ag 2 S@Pt nanocomposites at the anode and core-shell Au@Pd nanoparticles at the cathode produces a maximum power density of 89.7 mW cm -2 at a methanol feed concentration of 10 M and maintains good performance at a methanol concentration of up to 15 M. The high selectivity of the electrocatalysts achieved through structural construction accounts for the successful operation of the DMFC at high concentrations of methanol.

  11. High-concentration oxygen and surgical site infections in abdominal surgery: a meta-analysis.

    Science.gov (United States)

    Patel, Sunil V; Coughlin, Shaun C; Malthaner, Richard A

    2013-08-01

    There has been recent interest in using high-concentration oxygen to prevent surgical site infections (SSIs). Previous meta-analyses in this area have produced conflicting results. With the publication of 2 new randomized controlled trials (RCTs) that were not included in previous meta-analyses, an updated review is warranted. Our objective was to perform a meta-analysis on RCTs comparing high- and low- concentration oxygen in adults undergoing open abdominal surgery. We completed independent literature reviews using electronic databases, bibliographies and other sources of grey literature to identify relevant studies. We assessed the overall quality of evidence using grade guidelines. Statistical analysis was performed on pooled data from included studies. A priori subgroup analyses were planned to explain statistical and clinical heterogeneity. Overall, 6 studies involving a total of 2585 patients met the inclusion criteria. There was no evidence of a reduction in SSIs with high-concentration oxygen (risk ratio 0.77, 95% confidence interval 0.50-1.19, p = 0.24). We observed substantial heterogeneity among studies. There is moderate evidence that high-concentration oxygen does not reduce SSIs in adults undergoing open abdominal surgery.

  12. Cleaning Process Research of MVR High Concentration Salty Wastewater Treatment System

    Directory of Open Access Journals (Sweden)

    Wang Na

    2015-01-01

    Full Text Available A mechanical vapor re-compression (MVR evaporation system for the treatment of the highly-concentrated inorganic salt wastewater was investigated, and its process characteristics were analyzed taking sodium chloride salt wastewater as the treated solution. In this paper, by adding “H2O2 oxidation + filter +flash evaporation + hot filter” technology on the basis of original traditional MVR treatment system, the optimum technological conditions were determined through the experiment: The pH value is 8.5; the oxidation time is 24.0h; H2O2 amount accounting for 1% of the total wastewater under the condition of outlet test MVR system respectively fell 88.5% and 90.1% than the traditional process of effluent COD and NH3-N removal rate. MVR system for the sodium chloride salt qualified rate was increased from 83.2% to 98.2%. On the other hand, this process avoided the highly-concentrated outside of mother liquor by flashing evaporation recycling volatile solvent; the optimization process results were found to be consistent with published practical industrial data. Compared with the new process MVR system, the operation load of MVR system was lower. Therefore, the system can be used to treat the highly-concentrated inorganic salt wastewater and save energy. Therefore, the cleaning process can achieve remarkable energy saving and consumption, and reduce the pollution and the pollution and environmental protection effect.

  13. Consolidated bioprocessing of highly concentrated Jerusalem artichoke tubers for simultaneous saccharification and ethanol fermentation.

    Science.gov (United States)

    Guo, Lihao; Zhang, Jian; Hu, Fengxian; Dy Ryu, Dewey; Bao, Jie

    2013-10-01

    Consolidated bioprocessing (CBP) of Jerusalem artichoke tuber (Jat) for ethanol production is one of the most promising options for an alternate biofuel technology development. The technical barriers include the weak saccharolytic enzyme (inulinase) activity of the fermentation strain, and the well mixing of the high viscous fermentation slurry at the highly concentrated Jat loading. In this study, Saccharomyces cerevisiae DQ1 was found to produce relatively large amount of inulinase for hydrolysis of inulin in Jat, and the helical ribbon stirring bioreactor used provided well mixing performance under the high Jat loading. Even a highly concentrated Jat loading up to 35% (w/w) in the helical ribbon bioreactor for CBP was allowed. The results obtained from this study have demonstrated a feasibility of developing a CBP process technology in the helical ribbon bioreactor for ethanol production at a high yield 128.7 g/L and the theoretical yield 73.5%, respectively. This level of ethanol yield from Jat is relatively higher than others reported so far. The results of this study could provide a practical CBP process technology in the helical ribbon bioreactor for economically sustainable alternate biofuel production using highly concentrated inulin containing biomass feedstock such as Jat, at least 35%. Copyright © 2013 Wiley Periodicals, Inc.

  14. Enhanced Cycling Stability of Rechargeable Li-O2 Batteries Using High Concentration Electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bin; Xu, Wu; Yan, Pengfei; Sun, Xiuliang; Bowden, Mark E.; Read, Jeffrey; Qian, Jiangfeng; Mei, Donghai; Wang, Chong M.; Zhang, Jiguang

    2016-01-26

    The electrolyte stability against reactive reduced-oxygen species is crucial for the development of rechargeable Li-O2 batteries. In this work, we systematically investigated the effect of lithium salt concentration in 1,2-dimethoxyethane (DME)-based electrolytes on the cycling stability of Li-O2 batteries. Cells with high concentration electrolyte illustrate largely enhanced cycling stability under both the full discharge/charge (2.0-4.5 V vs. Li/Li+) and the capacity limited (at 1,000 mAh g-1) conditions. These cells also exhibit much less reaction-residual on the charged air electrode surface, and much less corrosion to the Li metal anode. The density functional theory calculations are conducted on the molecular orbital energies of the electrolyte components and the Gibbs activation barriers for superoxide radical anion to attack DME solvent and Li+-(DME)n solvates. In a highly concentrated electrolyte, all DME molecules have been coordinated with salt and the C-H bond scission of a DME molecule becomes more difficult. Therefore, the decomposition of highly concentrated electrolyte in a Li-O2 battery can be mitigated and both air-cathodes and Li-metal anodes exhibits much better reversibility. As a results, the cyclability of Li-O2 can be largely improved.

  15. Clearly Transparent Nanopaper from Highly Concentrated Cellulose Nanofiber Dispersion Using Dilution and Sonication

    Directory of Open Access Journals (Sweden)

    Takaaki Kasuga

    2018-02-01

    Full Text Available Nanopaper prepared from holocellulose pulp is one of the best substrates for flexible electronics because of its high thermal resistance and high clear transparency. However, the clearness of nanopaper decreases with increasing concentration of the starting cellulose nanofiber dispersion—with the use of a 2.2 wt % dispersion, for example—resulting in translucent nanopaper with a high haze of 44%. To overcome this problem, we show that the dilution of this high-concentration dispersion with water followed by sonication for 10 s reduces the haze to less than 10% while maintaining the high thermal resistance of the nanopaper. Furthermore, the combination of water dilution and a short sonication treatment improves the clearness of the nanopaper, which would translate into cost savings for the transportation and storage of this highly concentrated cellulose nanofiber dispersion. Finally, we demonstrate the improvement of the electrical conductivity of clear transparent nanopaper prepared from an initially high-concentration dispersion by dropping and heating silver nanowire ink on the nanopaper. These achievements will pave the way toward the realization of the mass production of nanofiber-based flexible devices.

  16. Growth and study of barium oxalate single crystals in agar gel

    Indian Academy of Sciences (India)

    Keywords. Barium oxalate; agar gel; XRD; IR; TGA/DTA. Abstract. Barium oxalate was grown in agar gel at ambient temperature. The effect of various parameters like gel concentration, gel setting time and concentration of the reactants on the growth of these crystals was studied. Prismatic platy shaped spherulites and ...

  17. Effect of barium doping on the physical properties of zinc oxide ...

    Indian Academy of Sciences (India)

    2016-06-09

    Jun 9, 2016 ... Abstract. The aim of this work is to study the effect of barium (Ba) doping on the optical, morphological and structural properties of ZnO nanoparticles. Undoped and Ba-doped ZnO have been successfully synthesized via sonochemical method using zinc nitrate, hexamethylenetetramine (HMT) and barium ...

  18. Effect of boric acid sintering aid on densification of barium ferrite

    Indian Academy of Sciences (India)

    Unknown

    largely on the microstructure such as grain size and grain size distribution. To obtain high magneto crystalline ani- sotropy, the sintered barium hexaferrite should have single phase with submicron particle sizes. Various methods have been used in the literature to prepare barium ferrite. The material has been prepared by.

  19. New efficient catalyst for ammonia synthesis: barium-promoted cobalt on carbon

    DEFF Research Database (Denmark)

    Hagen, Stefan; Barfod, Rasmus; Fehrmann, Rasmus

    2002-01-01

    Barium-promoted cobalt catalysts supported on carbon exhibit higher ammonia activities at synthesis temperatures than the commercial, multipromoted iron catalyst and also a lower ammonia......Barium-promoted cobalt catalysts supported on carbon exhibit higher ammonia activities at synthesis temperatures than the commercial, multipromoted iron catalyst and also a lower ammonia...

  20. Europium-doped barium halide scintillators for x-ray and ?-ray detections

    NARCIS (Netherlands)

    Selling, J.; Birowosuto, M.D.; Dorenbos, P.; Schweizer, S.

    2007-01-01

    Single crystals of undoped or europium-doped barium chloride, bromide, and iodide were investigated under x-ray and ?-ray excitations. The Eu2+-related x-ray excited luminescence found in the Eu-doped barium halides occurs at 402, 404, and 425?nm for the chloride, bromide, and iodide, respectively.

  1. Paradoxical proliferative potential of iron (II) sulphate on cancer cells after the 3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium (MTS) assay.

    Science.gov (United States)

    Kok, Stanton Hon Lung; Gambari, Roberto; Chui, Chung Hin; Lau, Fung Yi; Cheng, Gregory Yin Ming; Lai, Paul Bo San; Lam, Wing Sze; Chan, Albert Sun Chi; Cheng, Chor Hing; Teo, Ivy Tuang Ngo; Yu, Michael Wing Yiu; Tang, Johnny Cheuk On; Cheung, Filly; Wong, Raymond Siu Ming

    2007-06-01

    There are several scientific approaches for the determination of cellular growth influences of known or novel substances under in vitro conditions, among which colourimetric absorption measurement is considered to be one of the convenient methods. [3-(4,5-dimethylthiazol-2-yl)-5-(3-carboxymethoxyphenyl)-2-(4-sulfophenyl)-2H-tetrazolium] (MTS) assay is one of the commonly used colourimetric absorption assays based on the ability of dehydrogenase from viable cells to produce the brown soluble formazan detectable at 490 nm. Here we have tested the possible growth influence of iron (II) sulphate on two human cancer cell lines, the K562 chronic myelogenous leukaemia and T47D breast carcinoma cells, based on the MTS assay. We found that iron (II) sulphate possessed an inhibitory effect when added at 16- to 125-microM concentrations, but iron (II) sulphate became growth stimulatory when its concentration was further increased to 1000 microM. In addition, a dose-dependent increase in absorbance at the same wavelength was observed when we repeated the experiments without the addition of MTS and phenazine methosulfate. When we further repeated the cell growth determinations using adenosine triphosphate content assay for K562 and 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide (MTT) assay for T47D, iron (II) sulphate showed a consistent dose-dependent growth inhibitory effect. Morphological investigation after methylene blue staining clearly demonstrated that iron (II) sulphate, at a concentration of 1000 microM, is cytotoxic to T47D cells. Interestingly, a consistent increment for the absorbance at 490 nm was further observed with increased iron (II) sulphate concentration either in the presence or absence of MTS even in a cell-free environment. Thus we conclude that iron (II) sulphate is actually growth inhibitory and even cytotoxic at high concentrations towards the K562 and T47D cancer cells and the paradoxical proliferative activity of iron (II) sulphate on

  2. Unintended consequences of atmospheric injection of sulphate aerosols.

    Energy Technology Data Exchange (ETDEWEB)

    Brady, Patrick Vane; Kobos, Peter Holmes; Goldstein, Barry

    2010-10-01

    Most climate scientists believe that climate geoengineering is best considered as a potential complement to the mitigation of CO{sub 2} emissions, rather than as an alternative to it. Strong mitigation could achieve the equivalent of up to -4Wm{sup -2} radiative forcing on the century timescale, relative to a worst case scenario for rising CO{sub 2}. However, to tackle the remaining 3Wm{sup -2}, which are likely even in a best case scenario of strongly mitigated CO{sub 2} releases, a number of geoengineering options show promise. Injecting stratospheric aerosols is one of the least expensive and, potentially, most effective approaches and for that reason an examination of the possible unintended consequences of the implementation of atmospheric injections of sulphate aerosols was made. Chief among these are: reductions in rainfall, slowing of atmospheric ozone rebound, and differential changes in weather patterns. At the same time, there will be an increase in plant productivity. Lastly, because atmospheric sulphate injection would not mitigate ocean acidification, another side effect of fossil fuel burning, it would provide only a partial solution. Future research should aim at ameliorating the possible negative unintended consequences of atmospheric injections of sulphate injection. This might include modeling the optimum rate and particle type and size of aerosol injection, as well as the latitudinal, longitudinal and altitude of injection sites, to balance radiative forcing to decrease negative regional impacts. Similarly, future research might include modeling the optimum rate of decrease and location of injection sites to be closed to reduce or slow rapid warming upon aerosol injection cessation. A fruitful area for future research might be system modeling to enhance the possible positive increases in agricultural productivity. All such modeling must be supported by data collection and laboratory and field testing to enable iterative modeling to increase the

  3. Sintesis Dan Karakterisasi Magnet Berbasis Barium Heksaferit- Alumina

    OpenAIRE

    Hia, Taufik Hidayat

    2016-01-01

    Permanent magnet based on BaFe12O19 - Al2O3 by powder metallurgy method has been made. Variables of the research is barium hexaferrite (BaFe12O19) materials added Al2O3 with variations in the composition of 100:0, 60:40, 50:50 and 40:60 (% weight) and the sintering temperature of 900, 950, 1000, 1050 and 1100 0C with holding time of 2 hours. Quantities observed were include density, porosity, flux density, hysteresis curve, microstructure analysis by XRD and SEM. From the observation indicate...

  4. Transformations of calcium sulphates in solidified carbonated volatile fluidized ashes

    Directory of Open Access Journals (Sweden)

    Marian Jacek Łączny

    2017-01-01

    During the investigation it was assumed that calcium carbonate, being poorly water-soluble, would not react with the remaining components of the porous water of the volatile fluidized ash. Crystalline phases of calcium sulphates, anhydrite, gypsum and bassanite occurring in bound volatile fluidized ashes after carbonation demonstrate the possibility of crystallization in the presence of calcium carbonate. In particular, a change in the concentration of bassanite indicates that this phase, as a precursor to the crystallization of gypsum, may play a significant role in the process of binding carbonated volatile ashes.

  5. Evidence against Barium in the Mushroom Trogia venenata as a Cause of Sudden Unexpected Deaths in Yunnan, China

    Science.gov (United States)

    Zhang, Ying; Li, Yanchun; Wu, Gang; Feng, Bang; Yoell, Shanze; Yu, Zefen; Zhang, Keqin

    2012-01-01

    This study examined barium concentrations in the mushroom Trogia venenata, the leading culprit for sudden unexpected deaths in Yunnan, southwest China. We found that barium concentrations in T. venenata from Yunnan were low and comparable to other foods, inconsistent with barium concentrations in this mushroom as a significant contributor to these deaths. PMID:23042168

  6. Massive aspiration of barium sulfate during an upper gastrointestinal examination in a child with dysphagia.

    Science.gov (United States)

    Chiu, Chih-Yung; Wong, Kin-Sun; Tsai, Ming-Han

    2005-04-01

    Barium sulfate is an agent used widely as a contrast material for imaging studies of the gastrointestinal tract and is not inherently toxic to lung tissue. Aspiration of barium sulfate has been reported on rare occasions, but is more frequently seen in patients with underlying anatomical or neurological defects such as head and neck deformity, esophageal stricture, diverticulum or fistula. We report a previously healthy child suffered from massive aspiration of barium sulfate during the investigation of dysphagia due to an impacted foreign body in the esophagus. Massive aspiration of barium sulfate is potentially life-threatening because of mechanical interference with gas exchange. An obstruction of the esophagus should be considered in the differential diagnosis for children with acute dysphagia and barium contrast should be used with great care in such instance.

  7. Evaluation of gastrointestinal tract transit times using barium-impregnated polyethylene spheres and barium sulfate suspension in a domestic pigeon (Columba livia) model.

    Science.gov (United States)

    Bloch, Rebecca A; Cronin, Kimberly; Hoover, John P; Pechman, Robert D; Payton, Mark E

    2010-03-01

    Barium impregnated polyethylene spheres (BIPS) are used in small animal medicine as an alternative to barium sulfate for radiographic studies of the gastrointestinal tract. To determine the usefulness of BIPS as an alternative to barium suspension in measuring gastrointestinal (GI) transit time for avian species, ventrodorsal radiographs were used to follow the passage of BIPS and 30% barium sulfate suspension through the GI tracts of domestic pigeons (Columba livia). Gastrointestinal transit times of thirty 1.5-mm BIPS administered in moistened gelatin capsules and 30% barium sulfate suspension gavaged into the crop were compared in 6 pigeons. Although the barium suspension passed out of the GI tract of all pigeons within 24 hours, the 1.5-mm BIPS remained in the ventriculus for 368.0 +/- 176.8 hours and did not clear the GI tract for 424.0 +/- 204.6 hours. Although the times for passage of BIPS and 30% barium sulfate suspension from the crop into the ventriculus were not significantly different (P = .14), the times for passage of BIPS from the ventriculus into the large intestine-cloaca and for clearance from the GI tract of the pigeons were significantly longer (P barium sulfate suspension. From the results of this study, we conclude that BIPS are not useful for radiographically evaluating GI transit times in pigeons and are unlikely to be useful in other avian species that have a muscular ventriculus. BIPS may or may not be useful for evaluating GI transit times in species that lack a muscular ventriculus.

  8. Anion and cation diffusion in barium titanate and strontium titanate; Anionen- und Kationendiffusion in Barium- und Strontiumtitanat

    Energy Technology Data Exchange (ETDEWEB)

    Kessel, Markus Franz

    2012-12-19

    Perovskite oxides show various interesting properties providing several technical applications. In many cases the defect chemistry is the key to understand and influence the material's properties. In this work the defect chemistry of barium titanate and strontium titanate is analysed by anion and cation diffusion experiments and subsequent time-of-flight secondary ion mass spectrometry (ToF-SIMS). The reoxidation equation for barium titanate used in multi-layer ceramic capacitors (MLCCs) is found out by a combination of different isotope exchange experiments and the analysis of the resulting tracer diffusion profiles. It is shown that the incorporation of oxygen from water vapour is faster by orders of magnitude than from molecular oxygen. Chemical analysis shows the samples contain various dopants leading to a complex defect chemistry. Dysprosium is the most important dopant, acting partially as a donor and partially as an acceptor in this effectively acceptor-doped material. TEM and EELS analysis show the inhomogeneous distribution of Dy in a core-shell microstructure. The oxygen partial pressure and temperature dependence of the oxygen tracer diffusion coefficients is analysed and explained by the complex defect chemistry of Dy-doped barium titanate. Additional fast diffusion profiles are attributed to fast diffusion along grain boundaries. In addition to the barium titanate ceramics from an important technical application, oxygen diffusion in cubic, nominally undoped BaTiO{sub 3} single crystals has been studied by means of {sup 18}O{sub 2}/{sup 16}O{sub 2} isotope exchange annealing and subsequent determination of the isotope profiles in the solid by ToF-SIMS. It is shown that a correct description of the diffusion profiles requires the analysis of the diffusion through the surface space-charge into the material's bulk. Surface exchange coefficients, space-charge potentials and bulk diffusion coefficients are analysed as a function of oxygen partial

  9. Tungsten and Barium Transport in the Internal Plasma of Hollow Cathodes

    Science.gov (United States)

    Polk, James E.; Mikellides, Ioannis G.; Katz, Ira; Capece, Angela M.

    2008-01-01

    The effect of tungsten erosion, transport and redeposition on the operation of dispenser hollow cathodes was investigated in detailed examinations of the discharge cathode inserts from an 8200 hour and a 30,352 hour ion engine wear test. Erosion and subsequent re-deposition of tungsten in the electron emission zone at the downstream end of the insert reduces the porosity of the tungsten matrix, preventing the flow of barium from the interior. This inhibits the interfacial reactions of the barium-calcium-aluminate impregnant with the tungsten in the pores. A numerical model of barium transport in the internal xenon discharge plasma shows that the barium required to reduce the work function in the emission zone can be supplied from upstream through the gas phase. Barium that flows out of the pores of the tungsten insert is rapidly ionized in the xenon discharge and pushedback to the emitter surface by the electric field and drag from the xenon ion flow. Thisbarium ion flux is sufficient to maintain a barium surface coverage at the downstream endgreater than 0.6, even if local barium production at that point is inhibited by tungsten deposits. The model also shows that the neutral barium pressure exceeds the equilibrium vapor pressure of the impregnant decomposition reaction over much of the insert length,so the reactions are suppressed. Only a small region upstream of the zone blocked by tungsten deposits is active and supplies the required barium. These results indicate that hollowcathode failure models based on barium depletion rates in vacuum dispenser cathodes are very conservative.

  10. Study of barium bismuth titanate prepared by mechanochemical synthesis

    Directory of Open Access Journals (Sweden)

    Lazarević Z.Ž.

    2009-01-01

    Full Text Available Barium-bismuth titanate, BaBi4Ti4O15 (BBT, a member of Aurivillius bismuth-based layer-structure perovskites, was prepared from stoichiometric amounts of barium titanate and bismuth titanate obtained via mechanochemical synthesis. Mechanochemical synthesis was performed in air atmosphere in a planetary ball mill. The reaction mechanism of BaBi4Ti4O15 and the preparation and characteristics of BBT ceramic powders were studied using XRD, Raman spectroscopy, particle analysis and SEM. The Bi-layered perovskite structure of BaBi4Ti4O15 ceramic forms at 1100 °C for 4 h without a pre-calcination step. The microstructure of BaBi4Ti4O15 exhibits plate-like grains typical for the Bi-layered structured material and spherical and polygonal grains. The Ba2+ addition leads to changes in the microstructure development, particularly in the change of the average grain size.

  11. Green Synthesis of Barium Sulfate Particles Using Plant Extracts

    Directory of Open Access Journals (Sweden)

    Chen Long

    2016-01-01

    Full Text Available The biological molecules in the extracts of four fruits or vegetables: kiwifruit, oranges, tomato and carrot, were used as templates to synthesize barium sulfate (BaSO4 particles. The products were characterized by scanning electron microscopy, Fourier transform infrared spectroscopy and X-ray power diffractometry. The results showed that, leaf-shaped barite BaSO4 crystals with toothed edge were obtained with kiwifruit extracts; thorn spherical barium sulfate crystals with diameter of 2-4 micrometers were produced with tomato extracts; rod-like or quasi-spherical BaSO4 crystals with size of several hundred nanometers to several micrometers were gained with orange extracts; while quasi-spherical BaSO4 nano-crystals were obtained with carrot extracts. The formation mechanism of BaSO4 is also discussed, showing that the proteins, carbohydrates, vitamins and organic acids in above four kinds of fruits or vegetables may provide nucleation sites, controlling the growth of BaSO4 crystals with different morphologies.

  12. Strictures of the sigmoid colon: barium enema evaluation.

    Science.gov (United States)

    Blakeborough, A; Chapman, A H; Swift, S; Culpan, G; Wilson, D; Sheridan, M B

    2001-08-01

    To assess the accuracy of radiologic interpretation, in the absence of clinical information, in the differentiation of benign and malignant sigmoid strictures at barium enema examination. On two occasions, four independent observers retrospectively assessed examination findings in 78 patients with documented sigmoid strictures (43 benign, 35 malignant). Each stricture was graded by using a five-point scale (definitely malignant to definitely benign). No significant difference existed between the areas under the receiver operating characteristic curves for the two assessments with any observer. Consensus findings indicated agreement among at least three of the four observers in 68 (87%) and 66 (85%) cases at the first and second assessments, respectively. One benign stricture was called malignant at both assessments. When consensus existed, the positive predictive value for malignant strictures was 96% at both assessments (sensitivity, 63% and 66%). Nine malignant strictures were called benign, three at both assessments. When consensus existed, the positive predictive value for benign strictures was 84% and 88% at the first and second assessments, respectively (sensitivity, 88% and 86%, respectively). The differentiation between a benign and a malignant sigmoid stricture can be made in most cases at barium enema examination. When a stricture appears malignant, the diagnosis is usually correct, but caution is advised when a stricture appears benign.

  13. Primary versus secondary achalasia: New signs on barium esophagogram.

    Science.gov (United States)

    Gupta, Pankaj; Debi, Uma; Sinha, Saroj Kant; Prasad, Kaushal Kishor

    2015-01-01

    To investigate new signs on barium swallow that can differentiate primary from secondary achalasia. Records of 30 patients with primary achalasia and 17 patients with secondary achalasia were reviewed. Clinical, endoscopic, and manometric data was recorded. Barium esophagograms were evaluated for peristalsis and morphology of distal esophageal segment (length, symmetry, nodularity, shouldering, filling defects, and "tram-track sign"). Mean age at presentation was 39 years in primary achalasia and 49 years in secondary achalasia. The mean duration of symptoms was 3.5 years in primary achalasia and 3 months in secondary achalasia. False-negative endoscopic results were noted in the first instance in five patients. In the secondary achalasia group, five patients had distal esophageal segment morphology indistinguishable from that of primary achalasia. None of the patients with primary achalasia and 35% patients with secondary achalasia had a length of the distal segment approaching combined height of two vertebral bodies. None of the patients with secondary achalasia and 34% patients with primary achalasia had maximum caliber of esophagus approaching combined height of two vertebral bodies. Tertiary contractions were noted in 90% patients with primary achalasia and 24% patients with secondary achalasia. Tram-track sign was found in 55% patients with primary achalasia. Filling defects in the distal esophageal segment were noted in 94% patients with secondary achalasia. Length of distal esophageal segment, tertiary contractions, tram-track sign, and filling defects in distal esophageal segment are useful esophagographic features distinguishing primary from secondary achalasia.

  14. Barium titanate flakes based composites for microwave absorbing applications

    Directory of Open Access Journals (Sweden)

    Raj Kumar Jain

    2013-12-01

    Full Text Available Barium titanate (BT has attained research focus in recent past owing to considering its high dielectric constant and stealth capabilities in microwave region. Shape effects of BT viz. powder, micron size flakes, nanoparticles and nanotubes have been studied vastly for its stealth capabilities. Present study aims at the preparation of millimetric size barium titanate flakes (BTFs via controlled sol-gel process followed by tape casting. BTFs were mixed in varied weight ratio (50–90 wt.% with polyurethane resin to fabricate composite laminates. Electromagnetic properties measurement in X and Ku band revealed high values of real and imaginary permittivity. Reflection loss measurements demonstrated more than 20 dB loss in wide frequency range (11.4–13.6 GHz. For single layer microwave absorber, reflection loss values have been calculated and it is observed that calculated and measured reflection loss values are in good agreement to each other. Developed material can find applications in broadband radar signature reduction.

  15. Prospects for the ORNL/TAMU Barium Fluoride Array

    Science.gov (United States)

    Townsend, Austin; McIntosh, Alan; Youngs, Mike; Mosby, Shea; Varner, Robert

    2016-09-01

    Understanding the symmetry energy in the nuclear equation of state is essential to understanding properties such as the structure of a neutron star or its gravitational collapse, leading to supernovae. It has been suggested that to better constrain the symmetry energy one can use the bremmstrahlung gamma rays emitted from the hot, dense nuclear matter in the early stages of heavy ion collisions. These gamma rays have the potential to provide a cleaner probe than the more traditional hadronic probes. To measure these bremmstrahlung photons, barium fluoride scintillation crystals were chosen for their ability to detect photons across a large energy range and for their inherent pulse shape discrimination properties. This summer, the detectors of the TAMU/ORNL barium fluoride array were tested in preparation for such an experiment. Signals from each detector were recorded individually for cosmic rays and radioactive source events. The full waveforms were digitized with flash ADCs. A selected set of detectors was assembled and tested with beam from the K500 cyclotron. With this in-beam data, waveform integration parameters may be optimized. Results from the testing of these detectors with flash digitizers will be presented. Department of Energy, National Science Foundation, Cyclotron Institute.

  16. The Sulphate Effect on Lijiaxia Concrete Dam (China Gallery

    Directory of Open Access Journals (Sweden)

    Xufen Zhu

    2017-01-01

    Full Text Available The concrete degradation is one of the most serious problems for a dam construct during the normal operation, which determines the dam service life. Hence, it is very important to reduce the extent of the dam concrete degradation for the safety of the dam normal operation. Here, Lijiaxia hydroelectric station is taken as an example, and a comprehensive method to assess the sulphate effect on dam gallery is proposed. Eleven samples in total were taken from three difference locations by the drill bore. The microstructural investigations including X-ray fluorescence spectrometry (XRF, X-ray diffraction (XRD, scanning electron microscope (SEM, and energy dispersive spectroscopy (EDS were conducted to assess the sulphate attack and the degradation degree. Meanwhile, the water chemical analysis was applied to reveal the mechanism of concrete degradation. The experimental and analysis results indicate that the concrete degradation degree varies with the location of the samples. The components of the concrete change and the content of SO3 increase dramatically during degradation. Moreover, the mineral facies of the concrete change correspondingly, with the cement paste substituted by the calcite, calcium vitriol, and gypsum. The reinforcement and precaution measures are suggested based on the results of the degradation assessment.

  17. Investigation of lithium sulphate for high temperature thermal energy storage

    Science.gov (United States)

    Bayon, Alicia; Liu, Ming; Bruno, Frank; Hinkley, Jim

    2017-06-01

    Lithium sulphate (Li2SO4) was evaluated as a solid-solid PCM material to be coupled with concentrated solar power (CSP) technologies. The energy is stored in a cubic crystalline phase that is formed at temperatures above 576°C and can potentially be discharged at temperatures as low as 150°C, providing both sensible and latent thermal energy storage in a hybrid sensible-latent system. These operational conditions are appropriate for current CSP technologies based on subcritical steam Rankine power cycles. Results from thermal cycling experiments in air showed no change in energy storage capacity after 15 cycles. There was up to a 5% reduction in latent thermal capacity and 0.95% in total thermal capacity after 150 cycles in air. In our paper, we evaluate a hybrid sensible-latent thermal energy storage system based on lithium sulphate from an economic and technical performance point of view, demonstrating its potential as a high temperature thermal energy storage material.

  18. Liquid-Phase Processing of Barium Titanate Thin Films

    Science.gov (United States)

    Harris, David Thomas

    Processing of thin films introduces strict limits on the thermal budget due to substrate stability and thermal expansion mismatch stresses. Barium titanate serves as a model system for the difficulty in producing high quality thin films because of sensitivity to stress, scale, and crystal quality. Thermal budget restriction leads to reduced crystal quality, density, and grain growth, depressing ferroelectric and nonlinear dielectric properties. Processing of barium titanate is typically performed at temperatures hundreds of degrees above compatibility with metalized substrates. In particular integration with silicon and other low thermal expansion substrates is desirable for reductions in costs and wider availability of technologies. In bulk metal and ceramic systems, sintering behavior has been encouraged by the addition of a liquid forming second phase, improving kinetics and promoting densification and grain growth at lower temperatures. This approach is also widespread in the multilayer ceramic capacitor industry. However only limited exploration of flux processing with refractory thin films has been performed despite offering improved dielectric properties for barium titanate films at lower temperatures. This dissertation explores physical vapor deposition of barium titanate thin films with addition of liquid forming fluxes. Flux systems studied include BaO-B2O3, Bi2O3-BaB2O 4, BaO-V2O5, CuO-BaO-B2O3, and BaO-B2O3 modified by Al, Si, V, and Li. Additions of BaO-B2O3 leads to densification and an increase in average grain size from 50 nm to over 300 nm after annealing at 900 °C. The ability to tune permittivity of the material improved from 20% to 70%. Development of high quality films enables engineering of ferroelectric phase stability using residual thermal expansion mismatch in polycrystalline films. The observed shifts to TC match thermodynamic calculations, expected strain from the thermal expansion coefficients, as well as x-ray diffract measurements

  19. Multi-criteria manufacturability indices for ranking high-concentration monoclonal antibody formulations.

    Science.gov (United States)

    Yang, Yang; Velayudhan, Ajoy; Thornhill, Nina F; Farid, Suzanne S

    2017-09-01

    The need for high-concentration formulations for subcutaneous delivery of therapeutic monoclonal antibodies (mAbs) can present manufacturability challenges for the final ultrafiltration/diafiltration (UF/DF) step. Viscosity levels and the propensity to aggregate are key considerations for high-concentration formulations. This work presents novel frameworks for deriving a set of manufacturability indices related to viscosity and thermostability to rank high-concentration mAb formulation conditions in terms of their ease of manufacture. This is illustrated by analyzing published high-throughput biophysical screening data that explores the influence of different formulation conditions (pH, ions, and excipients) on the solution viscosity and product thermostability. A decision tree classification method, CART (Classification and Regression Tree) is used to identify the critical formulation conditions that influence the viscosity and thermostability. In this work, three different multi-criteria data analysis frameworks were investigated to derive manufacturability indices from analysis of the stress maps and the process conditions experienced in the final UF/DF step. Polynomial regression techniques were used to transform the experimental data into a set of stress maps that show viscosity and thermostability as functions of the formulation conditions. A mathematical filtrate flux model was used to capture the time profiles of protein concentration and flux decay behavior during UF/DF. Multi-criteria decision-making analysis was used to identify the optimal formulation conditions that minimize the potential for both viscosity and aggregation issues during UF/DF. Biotechnol. Bioeng. 2017;114: 2043-2056. © 2017 The Authors. Biotechnology and Bioengineering Published by Wiley Perodicals, Inc. © 2017 The Authors. Biotechnology and Bioengineering Published by Wiley Perodicals, Inc.

  20. Respiratory health effect of persons accidentally expose to high concentration of chlorine gas.

    Science.gov (United States)

    Chierakul, Nitipatana; Rittayamai, Nuttapol; Passaranon, Prachya; Chamchod, Charttiwut; Suntiwuth, Bralee

    2013-02-01

    To evaluate the short term and long term respiratory health effects of subjects who accidentally exposed to high concentration of chlorine gas. There was an accidental leakage of sodium hypochlorite from an industrial factory in Rayong province in June 2010. Medical records of those who developed severe symptoms after exposed to high concentration of chlorine gas were reviewed. Prospective observational study was conducted after hospital discharge by interviewing with respiratory health questionnaires, physical examination, spirometry, methacholine challenge test, and home peak expiratory flow (PEF) monitoring at 2, 5 and 8 months after the event. Among 1,434 persons exposed to chlorine gas, 92 developed severe symptoms required hospital admission and 21 participated in the follow-up study at 2 months there after. Respiratory symptoms were noted in 18 participants. Three most common symptoms were dyspnea (81%), chest tightness (71%), and cough (67%). Obstructive defect from spirometry was identified in 2 participants, one of which also had bronchial hyper responsiveness (BHR) compatible with reactive airway dysfunction syndrome (RADS). Seven participants had abnormal PEF variability. There were 10 and 5 participants left in the follow-up visit at 5 and 8 months respectively. Two participants had persistent obstructive defect with additional two subjects were noticed. Those who had BHR and abnormal PEF variability remained unchanged. Acute exposure to high concentration of chlorine gas causes both significant short and long term respiratory health effects. Most of the patients although have gradual improvement of respiratory symptoms, but some symptoms remain persistent. Few patients have lung function impairment lasting for at least 8 months.

  1. Niacin alters the ruminal microbial composition of cattle under high-concentrate condition

    Directory of Open Access Journals (Sweden)

    Dan Luo

    2017-06-01

    Full Text Available To understand the effects of niacin on the ruminal microbial ecology of cattle under high-concentrate diet condition, Illumina MiSeq sequencing technology was used. Three cattle with rumen cannula were used in a 3 × 3 Latin-square design trial. Three diets were fed to these cattle during 3 periods for 3 days, respectively: high-forage diet (HF; forage-to-concentrate ratio = 80:20, high-concentrate diet (HC; forage-to-concentrate ratio = 20:80, and HC supplemented with 800 mg/kg niacin (HCN. Ruminal pH was measured before feeding and every 2 h after initiating feeding. Ruminal fluid was sampled at the end of each period for microbial DNA extraction. Overall, our findings revealed that subacute ruminal acidosis (SARA was induced and the α-diversity of ruminal bacterial community decreased in the cattle of HC group. Adding niacin in HC could relieve the symptoms of SARA in the cattle but the ruminal pH value and the Shannon index of ruminal bacterial community of HCN group were still lower than those of HF group. Whatever the diet was, the ruminal bacterial community of cattle was dominated by Bacteroidetes, Firmicutes and Proteobacteria. High-concentrate diet significantly increased the abundance of Prevotella, and decreased the abundance of Paraprevotella, Sporobacter, Ruminococcus and Treponema than HF. Compared with HC, HCN had a trend to decrease the percentage of Prevotella, and to increase the abundance of Succiniclasticum, Acetivibrio and Treponema. Increasing concentrate ratio could decrease ruminal pH value, and change the ruminal microbial composition. Adding niacin in HC could increase the ruminal pH value, alter the ruminal microbial composition.

  2. Macrocyclic olefin metathesis at high concentrations by using a phase-separation strategy.

    Science.gov (United States)

    Raymond, Michaël; Holtz-Mulholland, Michael; Collins, Shawn K

    2014-09-26

    Macrocyclic olefin metathesis has seen advances in the areas of stereochemistry, chemoselectivity, and catalyst stability, but strategies aimed at controlling dilution effects in macrocyclizations are rare. Herein, a protocol to promote macrocyclic olefin metathesis, one of the most common synthetic tools used to prepare macrocycles, at relatively high concentrations (up to 60 mM) is described by exploitation of a phase-separation strategy. A variety of macrocyclic skeletons could be prepared having either different alkyl, aryl, or amino acids spacers. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  3. Design and Optimization of Fresnel Lens for High Concentration Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Lei Jing

    2014-01-01

    Full Text Available A practical optimization design is proposed, in which the solar direct light spectrum and multijunction cell response range are taken into account in combination, particularly for the Fresnel concentrators with a high concentration and a small aspect ratio. In addition, the change of refractive index due to temperature variation in outdoor operation conditions is also considered in the design stage. The calculation results show that this novel Fresnel lens achieves an enhancement of energy efficiency of about 10% compared with conventional Fresnel lens for a given solar spectrum, solar cell response, and corrected sunshine hours of different ambient temperature intervals.

  4. Carbon monoxide as an electron donor for the biological reduction of sulphate

    NARCIS (Netherlands)

    Parshina, S.N.; Sipma, J.; Henstra, A.M.; Stams, A.J.M.

    2010-01-01

    Several strains of Gram-negative and Gram-positive sulphate-reducing bacteria (SRB) are able to use carbon monoxide (CO) as a carbon source and electron donor for biological sulphate reduction. These strains exhibit variable resistance to CO toxicity. The most resistant SRB can grow and use CO as an

  5. The effect of sulphate on methanol conversion in mesophilic upflow anaerobic sludge bed reactors

    NARCIS (Netherlands)

    Weijma, J.; Chi, T.M.; Hulshoff Pol, L.W.; Stams, A.J.M.; Lettinga, G.

    2003-01-01

    Mesophilic (30 °C) upflow anaerobic sludge bed reactors were fed with an influent containing sulphate (2 g l-1) and methanol (1.33 g l-1). More than 90% of the methanol was mineralised to methane, while only ˜5–10% of the methanol was used for sulphate reduction. This pattern was independent of

  6. The influence of chloride and sulphate ions on the slaking rate of ...

    African Journals Online (AJOL)

    This paper describes an investigation into the influence of chloride and sulphate ions on the slaking of lime prepared from limestones of different geological origin in South Africa. It was endeavoured to assess the effects of the presence of chloride and sulphate ions on the hydration rate of lime, compared to its slaking in ...

  7. Method and use of recycled ( sup 35 S)sulphate in metabolic labelling

    Energy Technology Data Exchange (ETDEWEB)

    Sewell, R.F.; Mallick, N.P. (Royal Infirmary, Manchester (UK)); Brenchley, P.E.C. (Saint Mary' s Hospital, Manchester (UK))

    1989-12-01

    Efficiency of ({sup 35}S)sulphate incorporation into macromolecules in metabolic labelling experiments has been uniformly poor, 0.0005-0.35%. A procedure is described for recovering approximately 90% of the unused ({sup 35}S)sulphate from such a labelling experiment in a form in which it can be used again, thus improving (asymptotic) incorporation efficiency up to tenfold. (author).

  8. Volcanic lake systems as terrestrial analogue for sulphate-rich terrains on Mars

    NARCIS (Netherlands)

    Rodríguez, A.

    2016-01-01

    Remote-sensing observations and rover missions have documented the abundant presence of sulphate-rich mineral associations on the surface of Mars. Together with widespread occurrences of silica and frequent enrichments of chlorine and bromine in soils and rocks, the sulphate associations are

  9. Focus on CSIR research in pollution and waste: High sulphide Concentrations tolerated by sulphate reducing bacteria

    CSIR Research Space (South Africa)

    Greben, H

    2007-08-01

    Full Text Available Acid mine drainage (AMD) is a common result of mining activities caused by bacterial oxidation of sulphide minerals (pyrite) that results in sulphate rich waste water. AMD can be treated biologically in the presence of sulphate reducing bacteria...

  10. Magnesium sulphate for women at risk of preterm birth for neuroprotection of the fetus

    NARCIS (Netherlands)

    Doyle, Lex W.; Crowther, Caroline A.; Middleton, Philippa; Marret, Stephane; Rouse, Dwight

    2009-01-01

    Background Epidemiological and basic science evidence suggests that magnesium sulphate before birth may be neuroprotective for the fetus. Objectives To assess the effects of magnesium sulphate as a neuroprotective agent when given to women considered at risk of preterm birth. Search strategy We

  11. Modelling the competition between sulphate reducers and methanogens in a thermophilic methanol-fed bioreactor

    NARCIS (Netherlands)

    Spanjers, H.; Weijma, J.; Abusam, A.

    2002-01-01

    Sulphate can be removed from wastewater by means of biological anaerobic reduction to sulphide. The reduction requires the presence of a substrate that can serve as an electron donor. Methanol a suitable electron donor for sulphate reduction under thermophilic conditions. In an anaerobic system

  12. Correlation analysis between sulphate content and leaching of sulphates in recycled aggregates from construction and demolition wastes.

    Science.gov (United States)

    Barbudo, Auxi; Galvín, Adela P; Agrela, Francisco; Ayuso, Jesús; Jiménez, Jose Ramón

    2012-06-01

    In some recycled aggregates applications, such as component of new concrete or roads, the total content of soluble sulphates should be measured and controlled. Restrictions are usually motivated by the resistance or stability of the new structure, and in most cases, structural concerns can be remedied by the use of techniques such as sulphur-resistant cements. However, environmental risk assessment from recycling and reuse construction products is often forgotten. The purpose of this study is to analyse the content of soluble sulphate on eleven recycled aggregates and six samples prepared in laboratory by the addition of different gypsum percentages. As points of reference, two natural aggregates were tested. An analysis of the content of the leachable amount of heavy metals regulated by European regulation was included. As a result, the correlation between solubility and leachability data allow suggest a limiting gypsum amount of 4.4% on recycled aggregates. This limit satisfies EU Landfill Directive criteria, which is currently used as reference by public Spanish Government for recycled aggregates in construction works. Copyright © 2012 Elsevier Ltd. All rights reserved.

  13. Removal of Pb (II from Aqueous Solutions Using Mixtures of Bamboo Biochar and Calcium Sulphate, and Hydroxyapatite and Calcium Sulphate

    Directory of Open Access Journals (Sweden)

    Ahmed Hassan

    2016-01-01

    Full Text Available Sorption characteristics of Pb(II from aqueous solutions through a low-cost adsorbent mixture comprising of Bamboo biochar (BB and Calcium Sulphate (CS, and a more expensive mixture of Hydroxyapatite (HAP and Calcium Sulphate (CS, were investigated. The effects of equilibrium contact time, and adsorbate concentration conducted in batch experiments were studied. Adsorption equilibrium was established in 40 (min. The adsorption mechanism of Pb(II from these two adsorbent mixtures was carried out through a kinetic rate order. A pseudo second-order kinetic model was applied for the adsorption processes. The model yielded good correlation (R2 >0.999 of the experimental data. Adsorption of Pb(II using (BB&CS and (HAP&CS correlated well (R2 >0.99 with both the Langmuir and Freundlich isotherm equations under the concentration range studied. Hence, the effectiveness of an inexpensive natural material (BB&CS mixture in Pb(II removal is established, and is promising for use in other heavy metal adsorptions.

  14. Bio-based barium alginate film: Preparation, flame retardancy and thermal degradation behavior.

    Science.gov (United States)

    Liu, Yun; Zhang, Chuan-Jie; Zhao, Jin-Chao; Guo, Yi; Zhu, Ping; Wang, De-Yi

    2016-03-30

    A bio-based barium alginate film was prepared via a facile ionic exchange and casting approach. Its flammability, thermal degradation and pyrolysis behaviors, thermal degradation mechanism were studied systemically by limiting oxygen index (LOI), vertical burning (UL-94), microscale combustion calorimetry (MCC), thermogravimetric analysis (TGA) coupled with Fourier transform infrared analysis (FTIR) and pyrolysis-gas chromatography-mass spectrometry (Py-GC-MS). It showed that barium alginate film had much higher LOI value (52.0%) than that of sodium alginate film (24.5%). Moreover, barium alginate film passed the UL-94 V-0 rating, while the sodium alginate film showed no classification. Importantly, peak of heat release rate (PHRR) of barium alginate film in MCC test was much lower than that of sodium alginate film, suggested that introduction of barium ion into alginate film significantly decreased release of combustible gases. TG-FTIR and Py-GC-MS results indicated that barium alginate produced much less flammable products than that of sodium alginate in whole thermal degradation procedure. Finally, a possible degradation mechanism of barium alginate had been proposed. Copyright © 2015 Elsevier Ltd. All rights reserved.

  15. Sulphate, more than a nutrient, protects the microalga Chlamydomonas moewusii from cadmium toxicity

    Energy Technology Data Exchange (ETDEWEB)

    Mera, Roi; Torres, Enrique, E-mail: torres@udc.es; Abalde, Julio

    2014-03-01

    Highlights: • Sulphate effect on cadmium toxicity in the microalga Chlamydomonas moewusii Gerloff. • Cadmium increases the sulphur requirements in Chlamydomonas moewusii. • Kinetic coefficients for sulphate utilization and cadmium effect on them. • Sulphate and cadmium influence on the biosynthesis of low-molecular mass thiols. • Cadmium toxicity reduction by sulphate due to higher biosynthesis of thiols. - Abstract: Sulphur is an essential macroelement that plays important roles in living organisms. The thiol rich sulphur compounds, such as cysteine, γ-Glu–Cys, glutathione and phytochelatins participate in the tolerance mechanisms against cadmium toxicity. Plants, algae, yeasts and most prokaryotes cover their demand for reduced sulphur by reduction of inorganic sulphate. The aim of this study was to investigate, using a bifactorial experimental design, the effect of different sulphate concentrations in the nutrient solution on cadmium toxicity in the freshwater microalga Chlamydomonas moewusii. Cell growth, kinetic parameters of sulphate utilization and intracellular concentrations of low-molecular mass thiol compounds were determined. A mathematical model to describe the growth of this microalga based on the effects of sulphate and cadmium was obtained. An ANOVA revealed an interaction between them, 16% of the effect sizes was explained by this interaction. A higher amount of sulphate in the culture medium allowed a higher cadmium tolerance due to an increase in the thiol compound biosynthesis. The amount of low-molecular mass thiol compounds, mainly phytochelatins, synthesized by this microalga was significantly dependent on the sulphate and cadmium concentrations; the higher phytochelatin content was obtained in cultures with 4 mg Cd/L and 1 mM sulphate. The maximum EC{sub 50} value (based on nominal cadmium concentration) reached for this microalga was 4.46 ± 0.42 mg Cd/L when the sulphate concentration added to the culture medium was also 1 m

  16. High Concentration of Red Clay as an Alternative for Antibiotics in Aquaculture.

    Science.gov (United States)

    Jung, Jaejoon; Jee, Seung Cheol; Sung, Jung-Suk; Park, Woojun

    2016-01-01

    The use of antibiotics in aquaculture raises environmental and food safety concerns because chronic exposure of an aquatic ecosystem to antibiotics can result in the spread of antibiotic resistance, bioaccumulation of antibiotics in the organisms, and transfer of antibiotics to humans. In an attempt to overcome these problems, high-concentration red clay was applied as an alternative antibiotic against the following common fish pathogens: Aeromonas salmonicida, Vibrio alginolyticus, and Streptococcus equinus. The growth of A. salmonicida and V. alginolyticus was retarded by red clay, whereas that of S. equinus was promoted. Phase contrast and scanning electron microscopy analyses confirmed the attachment of red clay on cell surfaces, resulting in rapid gravitational removal and cell surface damage in both A. salmonicida and V. alginolyticus, but not in S. equinus. Different cell wall properties of grampositive species may explain the unharmed cell surface of S. equinus. Significant levels of oxidative stress were generated in only the former two species, whereas significant changes in membrane permeability were found only in S. equinus, probably because of its physiological adaptation. The bacterial communities in water samples from Oncorhynchus mykiss aquacultures supplemented with red clay showed similar structure and diversity as those from oxytetracycline-treated water. Taken together, the antibiotic effects of high concentrations of red clay in aquaculture can be attributed to gravitational removal, cell surface damage, and oxidative stress production, and suggest that red clay may be used as an alternative for antibiotics in aquaculture.

  17. Factors influencing the crystallisation of highly concentrated water-in-oil emulsions: A DSC study

    Directory of Open Access Journals (Sweden)

    Irina Masalova

    2012-03-01

    Full Text Available Highly concentrated emulsions are used in a variety of applications, including the cosmetics, food and liquid explosives industries. The stability of these highly concentrated water-in-oil emulsions was studied by differential scanning calorimetry. Crystallisation of the emulsions was initiated by exposing the emulsions to a low temperature. The effects of surfactant type, electrolyte concentration and electrolyte composition in the aqueous phase on emulsion crystallisation temperature were studied. Surfactant type affected the emulsion crystallisation temperature in the following order: PIBSA-MEA=PIBSA-UREA < PIBSA-MEA/SMO < PIBSA-IMIDE < SMO. These results are in the same sequence as results obtained for the stability of these emulsions in aging studies, that is, PIBSA-MEA was the most stable with age and SMO was the least. The effect of the surfactant type on emulsion crystallisation can probably be attributed to the differing strengths of the surfactant–electrolyte interactions, which result in different molecular packing geometry and differing mobility of the surfactant lipophilic portion at the interface. These results enhance our understanding of the factors that affect the stability of explosive emulsions.

  18. Sterile Filtration of Highly Concentrated Protein Formulations: Impact of Protein Concentration, Formulation Composition, and Filter Material.

    Science.gov (United States)

    Allmendinger, Andrea; Mueller, Robert; Huwyler, Joerg; Mahler, Hanns-Christian; Fischer, Stefan

    2015-10-01

    Differences in filtration behavior of concentrated protein formulations were observed during aseptic drug product manufacturing of biologics dependent on formulation composition. The present study investigates filtration forces of monoclonal antibody formulations in a small-scale set-up using polyvinylidene difluoride (PVDF) or polyethersulfone (PES) filters. Different factors like formulation composition and protein concentration related to differences in viscosity, as well as different filtration rates were evaluated. The present study showed that filtration behavior was influenced by the presence or absence of a surfactant in the formulation, which defines the interaction between filter membrane and surface active formulation components. This can lead to a change in filter resistance (PES filter) independent on the buffer system used. Filtration behavior was additionally defined by rheological non-Newtonian flow behavior. The data showed that high shear rates resulting from small pore sizes and filtration pressure up to 1.0 bar led to shear-thinning behavior for highly concentrated protein formulations. Differences in non-Newtonian behavior were attributed to ionic strength related to differences in repulsive and attractive interactions. The present study showed that the interplay of formulation composition, filter material, and filtration rate can explain differences in filtration behavior/filtration flux observed for highly concentrated protein formulations thus guiding filter selection. © 2015 Wiley Periodicals, Inc. and the American Pharmacists Association.

  19. Exploration of the horizontally staggered light guides for high concentration CPV applications.

    Science.gov (United States)

    Selimoglu, Ozgur; Turan, Rasit

    2012-08-13

    The material and processing costs are still the major drawbacks of the c-Si based photovoltaic (PV) technology. The wafer cost comprises up to 35-40% of the total module cost. New approaches and system designs are needed in order to reduce the share of the wafer cost in photovoltaic energy systems. Here we explore the horizontally staggered light guide solar optics for use in Concentrated Photovoltaic (CPV) applications. This optical system comprises a lens array system coupled to a horizontal light guide which directs the incoming light beam to its edge. We have designed and simulated this system using a commercial ray tracing software (Zemax). The system is more compact, thinner and more robust compared to the conventional CPV systems. Concentration levels as high as 1000x can easily be reached when the system is properly designed. With such a high concentration level, a good acceptance angle of + -1 degree is still be conserved. The analysis of the system reveals that the total optical efficiency of the system could be as high as %94.4 without any anti-reflection (AR) coating. Optical losses can be reduced by just accommodating a single layer AR coating on the initial lens array leading to a %96.5 optical efficiency. Thermal behavior of high concentration linear concentrator is also discussed and compared with a conventional point focus CPV system.

  20. Preparation of a stable graphene dispersion with high concentration by ultrasound.

    Science.gov (United States)

    Zhang, Weina; He, Wei; Jing, Xinli

    2010-08-19

    With unique structure and extraordinary electronic, thermal, and mechanical properties, graphene fascinates the scientific community. Due to its hydrophobic feature, preparation of a stable and highly concentrated graphene dispersion without the assistance of dispersing agents has generally been considered a challenge. Chemical reduction of graphene oxide (GO) is one of the most important methods for preparing a graphene dispersion. The aggregation of graphene sheets is a key reason to destabilize the resulting dispersion during conversion of aqueous GO dispersion to graphene. In this study, by replacing mechanical stirring with ultrasonic irradiation, the aggregation of various intermediates is effectively suppressed during the process of reduction of GO. Hence, a stable graphene dispersion with a high concentration of 1 mg.mL(-1) and relatively pure graphene sheets are achieved, and the as-prepared graphene paper exhibits a high electric conductivity of 712 S.m(-1). Ultraviolet-visible absorption spectroscopy and X-ray photoelectron spectroscopy show that ultrasound is the essence of enhancing chemical reaction rate. Fourier transformed infrared spectra and Raman spectra indicate that ultrasound has less damage to the chemical and crystal structures of graphene.

  1. Clinical study on high concentrations of sodium hyaluronate eye drops for moderate to severe dry eye

    Directory of Open Access Journals (Sweden)

    Yu-Jing Tian

    2014-06-01

    Full Text Available AIM: To observe the efficacy of high concentrations of sodium hyaluronate(3g/L SHfor moderate to severe dry eye. METHODS: Forty moderate to severe dry eye patients were included in the study according to the diagnosis criteria and randomized into two groups. The patients of the trial group received topical administration of high concentration sodium hyaluronate(3g/L, and those of the control group received sodium hyaluronate(1g/Lplus recombinant human epidermal growth factor. The dry eye symptom scores, ocular surface disease index(OSDIscores, tear film break-up time(BUT, Schirmer Ⅰ test and corneal fluorescein staining score were evaluated.All the indexes were compared between the two groups 2wk before and after treatment. RESULTS: There were no significant differences of the indicators between the two groups before treatment. After 2wk treatment, the differences were statistically significant compared to former except for the Schirmer Ⅰ test. Compared with the control group, the symptom scores and the OSDI scores were lowered. No significant differences were found in the other indicators between these two groups. CONCLUSION: Topical usage of highconcentrations of sodium hyaluronate(3g/Lis beneficial for remitting the ocular symptoms in moderate to severe dry eyes, and also improve the quality of life of patients.

  2. Highly Concentrated Alginate-Gellan Gum Composites for 3D Plotting of Complex Tissue Engineering Scaffolds

    Directory of Open Access Journals (Sweden)

    Ashwini Rahul Akkineni

    2016-04-01

    Full Text Available In tissue engineering, additive manufacturing (AM technologies have brought considerable progress as they allow the fabrication of three-dimensional (3D structures with defined architecture. 3D plotting is a versatile, extrusion-based AM technology suitable for processing a wide range of biomaterials including hydrogels. In this study, composites of highly concentrated alginate and gellan gum were prepared in order to combine the excellent printing properties of alginate with the favorable gelling characteristics of gellan gum. Mixtures of 16.7 wt % alginate and 2 or 3 wt % gellan gum were found applicable for 3D plotting. Characterization of the resulting composite scaffolds revealed an increased stiffness in the wet state (15%–20% higher Young’s modulus and significantly lower volume swelling in cell culture medium compared to pure alginate scaffolds (~10% vs. ~23%. Cytocompatibility experiments with human mesenchymal stem cells (hMSC revealed that cell attachment was improved—the seeding efficiency was ~2.5–3.5 times higher on the composites than on pure alginate. Additionally, the composites were shown to support hMSC proliferation and early osteogenic differentiation. In conclusion, print fidelity of highly concentrated alginate-gellan gum composites was comparable to those of pure alginate; after plotting and crosslinking, the scaffolds possessed improved qualities regarding shape fidelity, mechanical strength, and initial cell attachment making them attractive for tissue engineering applications.

  3. High concentrations of H2O2 make aerobic glycolysis energetically more favourable than cellular respiration.

    Directory of Open Access Journals (Sweden)

    Hamid R Molavian

    2016-08-01

    Full Text Available Since the original observation of the Warburg Effect in cancer cells, over eight decades ago, the major question of why aerobic glycolysis is favored over oxidative phosphorylation has remained unresolved. An understanding of this phenomenon may well be the key to the development of more effective cancer therapies. In this paper, we use a semi-empirical method to throw light on this puzzle. We show that aerobic glycolysis is in fact energetically more favorable than oxidative phosphorylation for concentrations of peroxide (H2O2 above some critical threshold value. The fundamental reason for this is the activation and high engagement of the pentose phosphate pathway (PPP in response to the production of reactive oxygen species H2O2 by mitochondria and the high concentration of H2O2 (produced by mitochondria and other sources. This makes oxidative phosphorylation an inefficient source of energy since it leads (despite high levels of ATP production to a concomitant high energy consumption in order to respond to the hazardous waste products resulting from cellular processes associated with this metabolic pathway. We also demonstrate that the high concentration of H2O2 results in an increased glucose consumption, and also increases the lactate production in the case of glycolysis.

  4. Mutate Chlorella sp. by nuclear irradiation to fix high concentrations of CO2.

    Science.gov (United States)

    Cheng, Jun; Huang, Yun; Feng, Jia; Sun, Jing; Zhou, Junhu; Cen, Kefa

    2013-05-01

    To improve biomass productivity and CO2 fixation of microalgae under 15% (v/v) CO2 of flue gas, Chlorella species were mutated by nuclear irradiation and domesticated with high concentrations of CO2. The biomass yield of Chlorella pyrenoidosa mutated using 500 Gy of (60)Co γ irradiation increased by 53.1% (to 1.12 g L(-1)) under air bubbling. The mutants were domesticated with gradually increased high concentrations of CO2 [from 0.038% (v/v) to 15% (v/v)], which increased the biomass yield to 2.41 g L(-1). When light transmission and culture mixing in photo-bioreactors were enhanced at 15% (v/v) CO2, the peak growth rate of the domesticated mutant (named Chlorella PY-ZU1) was increased to 0.68 g L(-1) d(-1). When the ratio of gas flow rate (L min(-1)) to 1L of microalgae culture was 0.011, the peak CO2 fixation rate and the efficiency of Chlorella PY-ZU1 were 1.54 g L(-1) d(-1) and 32.7%, respectively. Copyright © 2013 Elsevier Ltd. All rights reserved.

  5. Development-dependent modification of the extracellular matrix by a sulphated glycoprotein in Volvox carteri.

    Science.gov (United States)

    Wenzl, S; Thym, D; Sumper, M

    1984-04-01

    We report the chemical characterization of the highly sulphated glycoprotein SSG 185 from Volvox carteri. SSG 185 is a hydroxyproline-containing, extracellular glycoprotein. The sulphate residues are clustered within the parent saccharide structure of SSG 185, since on mercaptolysis all the sulphate residues are recovered in a small saccharide fragment containing mannose, arabinose and sulphate (in a molar ratio of 112). SSG 185 is a short-lived molecule, serving as a precursor for a high mol. wt. component of the extracellular matrix. Synthesis of SSG 185 is developmentally controlled. Different SSG 185 variants, with unknown modifications in the sulphated saccharide fragment, are synthesized at different developmental stages or under the influence of the sexual inducer. These modifications remain conserved in the aggregated state of SSG 185, indicating the development-dependent modification of the extracellular matrix.

  6. Sulphation reactions of oxidic dust particles in waste heat boiler environment. Literature review

    Energy Technology Data Exchange (ETDEWEB)

    Ranki, T.

    1999-09-01

    Sulphation of metal oxides has an important role in many industrial processes. In different applications sulphation reactions have different aims and characteristics. In the flash smelting process sulphation of oxidic flue dust is a spontaneous and inevitable phenomena, which takes place in the waste heat boiler (WHB) when cooling down hot dust laden off-gases from sulphide smelters. Oxidic dust particles (size 0 - 50 {mu}m) react with O{sub 2} and SO{sub 2} or SO{sub 3} in a certain temperature range (500 - 800 deg C). Sulphation reactions are highly exothermic releasing large amount of heat, which affects the gas cooling and thermal performance of the boiler. Thermodynamics and kinetics of the system have to be known to improve the process and WHB operation. The rate of sulphation is affected by the prevailing conditions (temperature, gas composition) and particle size and microstructure (porosity, surface area). Some metal oxides (CuO) can react readily with SO{sub 2} and O{sub 2} and act as self-catalysts, but others (NiO) require the presence of an external catalyst to enhance the SO{sub 3} formation and sulphation to proceed. Some oxides (NiO) sulphate directly, some (CuO) may form first intermediate phases (basic sulphates) depending on the reaction conditions. Thus, the reaction mechanisms are very complex. The aim of this report was to search information about the factors affecting the dust sulphation reactions and suggested reaction mechanisms and kinetics. Many investigators have studied sulphation thermodynamics and reaction kinetics and mechanisms of macroscopical metal oxide pieces, but only few articles have been published about sulphation of microscopical particles, like dust. All the found microscale studies dealt with sulphation reactions of calcium oxide, which is not present in the flash smelting process, but used as an SO{sub 2} absorbent in the combustion processes. However, also these investigations may give some hints about the sulphation

  7. Automated biological sulphate reduction: a review on mathematical models, monitoring and bioprocess control.

    Science.gov (United States)

    Cassidy, Joana; Lubberding, Henk J; Esposito, Giovanni; Keesman, Karel J; Lens, Piet N L

    2015-11-01

    In the sulphate-reducing process, bioprocess control can be used to regulate the competition between microbial groups, to optimize the input of the electron donor and/or to maximize or minimize the production of sulphide. As shown in this review, modelling and monitoring are important tools in the development and application of a bioprocess control strategy. Pre-eminent literature on modelling, monitoring and control of sulphate-reducing processes is reviewed. This paper firstly reviews existing mathematical models for sulphate reduction, focusing on models for biofilms, microbial competition, inhibition and bioreactor dynamics. Secondly, a summary of process monitoring strategies is presented. Special attention is given to in situ sensors for sulphate, sulphide and electron donor concentrations as well as for biomass activity and composition. Finally, the state of the art of the bioprocess control strategies in biological sulphate reduction processes is overviewed. © FEMS 2015. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  8. Ammonium sulphate on maize crops under no tillage

    Directory of Open Access Journals (Sweden)

    Maria Anita Gonçalves da Silva

    2012-01-01

    Full Text Available The objectives of this work were to evaluate the management of N and S (as ammonium sulphate fertilization under no-tillage system on the components of maize productivity and on N and S accumulation in the crop, as well as to evaluate the minimum value of the Nitrogen Sufficiency Index (NSI 0.95 as an indicator for side dressing requirements. The experiment had a completely randomized block design with six treatments and four replications carried out in Red Latosol dystrophic soil (Hapludox, in Campo Mourão, Paraná State, where the following treatments in summer growth maize were applied: T1- 120 kg ha-1 N in seeding; T2- 120 kg ha-1 N in side dressing; T3- 40 kg ha-1 N in seeding and 80 kg ha-1 N in side dressing; T4- 30 kg ha-1 N in seeding and 90 kg ha-1 N in side dressing, monitored by a chlorophyll meter using the Nitrogen Sufficiency Index (NSI; T5- 120 kg ha-1 N anticipated in wheat seeding; T6- without nitrogen fertilization. NSI was determined by the relationship between the leaf chlorophyll index (ICF average of T4 plants and that one in the plot fertilized with 120 kg ha-1 N at the maize seed sowing (T1. During two years, ammonium sulphate was applied to the maize crop after wheat under no tillage system. In the first year, with adequate rainfall, the maize yield was similar to the one in which the complete ammonium sulphate dose application was done in maize seeding and side dressing. The anticipated fertilization to wheat seed sowing resulted in maize yield without difference from the parceled form. In the second year, with irregular rainfall, all treatments with N were similar and they increased maize yield compared to that without N fertilization. NSI of 0.95 was not efficient to evaluate maize N requirements in side dressing, and resulted in lower maize yield. N was accumulated mainly in the grains unlike S that accumulated in the plant shoots; both were highly correlated to maize productivity.

  9. Microstructure of doped barium titanate prepared from polymeric precursors

    Directory of Open Access Journals (Sweden)

    Stojanovic, B. D.

    2002-02-01

    Full Text Available Barium titanate is used extensively as a dielectric in ceramic capacitors, particularly due to its high dielectric constant and low dielectric loss characteristics. It can be made semiconducting by addition of certain dopants and by proper modification of grains and grain boundary properties obtaining very interesting characteristics for various applications. The synthesis method and sintering regime have a strong influence on properties of obtained barium titanate ceramics. Doped barium titanate was prepared with Nb+5 and Y+3 ions as donor dopants, and with Mn+2 ions as acceptor dopant by polymeric precursors method. By this procedure nanosized powders were obtained after calcination. Sintering was performed in the temperature range of 1290ºC to 1380ºC. The microstructure of doped BaTiO3 was performed using scanning electron microscopy. The influence of dopants and sintering temperature on grain size was analysed.

    El titanato de bario se usa extensamente como dieléctrico en condensadores cerámicos, debido principalmente a su elevada constante dieléctrica y a sus bajas pérdidas dieléctricas. Puede hacerse semiconductor mediante la adición de ciertos dopantes y a través de modificaciones adecuadas de las propiedades de los granos y los bordes de grano se obtienen características muy interesantes para muchas aplicaciones. El método de síntesis y el régimen de sinterización tienen una fuerte influencia sobre las propiedades del titanato de bario cerámico. El titanato de bario dopado con Nb5+ y Y3+ como dopantes donores y con Mn2+ como dopante aceptor se preparó mediante el método de precursores poliméricos. Mediante este procedimiento se obtuvieron polvos nanométricos después de la etapa de calcinación. La sinterización se realizó en el intervalo de temperaturas entre 1290ºC y 1380ºC. La microestructura del BaTiO3 dopado se estudió usando microscopía electrónica de barrido. Se analizó la influencia de los

  10. The efficacy of steroids for postoperative persistent inflammatory reaction in a patient with barium peritonitis: A case report.

    Science.gov (United States)

    Kojima, Hirofumi; Hojo, Shozo; Manabe, Takahiro; Demura, Shiori; Sekine, Shinichi; Shibuya, Kazuto; Hashimoto, Isaya; Yoshioka, Isaku; Okumura, Tomoyuki; Nagata, Takuya; Fujii, Tsutomu

    2017-01-01

    Barium peritonitis is a serious and life-threatening disease requiring intensive care. Residual barium in the intraperitoneal cavity can cause persistent inflammation, postoperatively. An 80-year-old woman was admitted to our hospital because of abdominal pain and vomiting after barium meal examination. Physical and radiographic examination showed sigmoid colon perforation. Barium sulfate extravasation was noted in the intraperitoneal cavity. We diagnosed the patient with barium peritonitis, and performed Hartmann's procedure and thorough lavage of the intraperitoneal cavity with 20-L saline. Postoperative blood examination results were not readily improved because of the residual barium in the intraperitoneal and retroperitoneal cavities. We excluded the presence of any other inflammation origin, except that from residual barium. Methylprednisolone 500mg/body/day was administered for 3days and the dose was gradually decreased thereafter. The white blood cell count and serum C-reactive protein levels immediately improved to normal levels. Barium peritonitis is associated with high mortality. Residual barium in the intraperitoneal cavity can cause chemical peritonitis, leading to granuloma formation and ileus, postoperatively. Therefore, complete removal of barium in the abdominal cavity with aggressive drainage and large quantity of saline is necessary to prevent postoperative inflammatory reaction. The use of steroids improves the persistent inflammation caused by residual barium, unless any infectious origins are present, which can worsen with steroid-use. Residual barium in the intraperitoneal cavity causes persistent inflammatory reaction in patients with barium peritonitis. The use of steroids is effective for postoperative persistent inflammation due to the residual barium. Copyright © 2017 The Author(s). Published by Elsevier Ltd.. All rights reserved.

  11. Sulphate, more than a nutrient, protects the microalga Chlamydomonas moewusii from cadmium toxicity.

    Science.gov (United States)

    Mera, Roi; Torres, Enrique; Abalde, Julio

    2014-03-01

    Sulphur is an essential macroelement that plays important roles in living organisms. The thiol rich sulphur compounds, such as cysteine, γ-Glu-Cys, glutathione and phytochelatins participate in the tolerance mechanisms against cadmium toxicity. Plants, algae, yeasts and most prokaryotes cover their demand for reduced sulphur by reduction of inorganic sulphate. The aim of this study was to investigate, using a bifactorial experimental design, the effect of different sulphate concentrations in the nutrient solution on cadmium toxicity in the freshwater microalga Chlamydomonas moewusii. Cell growth, kinetic parameters of sulphate utilization and intracellular concentrations of low-molecular mass thiol compounds were determined. A mathematical model to describe the growth of this microalga based on the effects of sulphate and cadmium was obtained. An ANOVA revealed an interaction between them, 16% of the effect sizes was explained by this interaction. A higher amount of sulphate in the culture medium allowed a higher cadmium tolerance due to an increase in the thiol compound biosynthesis. The amount of low-molecular mass thiol compounds, mainly phytochelatins, synthesized by this microalga was significantly dependent on the sulphate and cadmium concentrations; the higher phytochelatin content was obtained in cultures with 4 mg Cd/L and 1mM sulphate. The maximum EC50 value (based on nominal cadmium concentration) reached for this microalga was 4.46 ± 0.42 mg Cd/L when the sulphate concentration added to the culture medium was also 1mM. An increase in the sulphate concentration, in deficient environments, could alleviate the toxic effect of this metal; however, a relative excess is also negative. The results obtained showed a substrate inhibition for this nutrient. An uncompetitive model for sulphate was chosen to establish the mathematical model that links both factors. Copyright © 2014 Elsevier B.V. All rights reserved.

  12. A Comparative Study on Magnetostructural Properties of Barium Hexaferrite Powders Prepared by Polyethylene Glycol

    Directory of Open Access Journals (Sweden)

    Zehra Durmus

    2014-01-01

    Full Text Available Nanocrystalline particles of barium hexaferrite were synthesized by a sol-gel combustion route using nitrate-citrate gels prepared from metal nitrates and citric acid solutions with Fe/Ba molar ratio 12. The present paper aims to study the effect of addition of polyethylene glycol (PEG solutions with different molecular weights (MW: 400, 2000, and 10.000 g/mol on magnetostructural properties of barium hexaferrite. The formation of the barium hexaferrite was inspected using X-ray diffraction (XRD analysis, Fourier transform infrared (FT-IR analysis, thermogravimetric (TGA analysis, scanning electron microscopy (SEM analysis and vibrating sample magnetometer (VSM analysis for magnetic measurements.

  13. Addition of methyl cellulose enema to double-contrast barium imaging of sigmoid diverticulosis

    Energy Technology Data Exchange (ETDEWEB)

    Olsson, R. [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Adnerhill, I. [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Bjoerkdahl, P. [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Ekberg, O. [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology; Fork, F.T. [Malmoe Univ. Hospital (Sweden). Dept. of Diagnostic Radiology

    1997-01-01

    Double-contrast barium enema has a reduced sensitivity in patients with severe sigmoid diverticulosis. Therefore a carboxy methyl cellulose enema was employed after the conventional double-contrast examination in 15 patients with sigmoid diverticulosis. A significant increase in lumen diameter and a superior removal of barium residue from the diverticulas facilitated the interpretation of the sigmoid loops. Conclusion: The addition of methyl cellulose enema to double-contrast barium imaging improves diagnostic imaging in diverticulosis by expanding the lumen and emptying the diverticulas. (orig.).

  14. Reducing conditions on barium absorption in rice plants cultured in BaSO4-enriched soil doi: 10.4025/actasciagron.v36i1.17539

    OpenAIRE

    Marcio Osvaldo Lima Magalhães; Nelson Moura Brasil do Amaral Sobrinho; Everaldo Zonta; Alfredo Tolón Becerra; Xavier Bolívar Lastra-Bravo; Izabella Bezerra Coutinho

    2014-01-01

    To evaluate the possible solubilization of barium sulfate in soils under reducing conditions and its effects on barium bioavailability, an Oryza sativa pot trial was established. Increasing barium doses and two redox potential conditions were evaluated. The geochemical fractionation data demonstrated that reducing conditions led to an increase in the levels of more labile forms of barium and a reduction in more stable forms. Furthermore, higher doses of barium were found to have a negative im...

  15. Recent Insights into Cell Surface Heparan Sulphate Proteoglycans and Cancer

    DEFF Research Database (Denmark)

    Couchman, John R; Multhaupt, Hinke; Sanderson, Ralph D

    2016-01-01

    A small group of cell surface receptors are proteoglycans, possessing a core protein with one or more covalently attached glycosaminoglycan chains. They are virtually ubiquitous and their chains are major sites at which protein ligands of many types interact. These proteoglycans can signal...... and regulate important cell processes, such as adhesion, migration, proliferation, and differentiation. Since many protein ligands, such as growth factors, morphogens, and cytokines, are also implicated in tumour progression, it is increasingly apparent that cell surface proteoglycans impact tumour cell...... behaviour. Here, we review some recent advances, emphasising that many tumour-related functions of proteoglycans are revealed only after their modification in processes subsequent to synthesis and export to the cell surface. These include enzymes that modify heparan sulphate structure, recycling of whole...

  16. [Study on the lung targeting gelatin microspheres of streptomycin sulphate].

    Science.gov (United States)

    Zhang, Z; Lu, B; Shu, G; Xie, H; Yi, Q; He, Y; Wang, J

    1995-06-01

    This paper is reported the technology of lung targeting gelatin microspheres of streptomycin sulphate (SMS). The microspheres were prepared with natural biodegradable gelatin as the load material and castor oil as the oil phase. The experimental conditions were optimized, the mean volume diameter obtained being 9.7 microns and the mean rate of encapsulation 15.69%. The content, shape and size of the microspheres showed no remarkable change after storage at 37 degrees C RH 75% for 3 months. Activation energy of heat decomposition E = 75.86kJ/mol. In vitro, the SMS release rate was found to accord with Higuchi equation with t1/2 = 8.6h. In vivo (rabbits) the gelatin microspheres were proved to be concentrated in the lung.

  17. Boron-Doped Diamond Electrode in Sodium Sulphate Medium

    Directory of Open Access Journals (Sweden)

    Codruţa Cofan

    2011-01-01

    Full Text Available Differential pulse voltammetry (DPV and chronoamperometry (CA were used to detect and determine acetylsalicylic acid (ASA at a mildly oxidized boron-doped diamond (BDD electrode in a neutral sodium sulphate solution as supporting electrolyte. ASA determination in unbuffered medium was achieved using neutralized standard and real samples. Over the concentration range of 0.01 mM–0.1 mM, linear calibration plots of anodic current peaks in DPV and anodic currents in CA experiments versus concentration were obtained with very high correlation coefficients and good sensitivity values. The limits of detection were situated around 1 μM. The association of DPV and CA techniques with standard addition method represented a suitable option for the determination of ASA in real samples such as pharmaceutical formulations.

  18. Chalcopyrite concentrate leaching with biologically produced ferric sulphate.

    Science.gov (United States)

    Kinnunen, P H-M; Heimala, S; Riekkola-Vanhanen, M-L; Puhakka, J A

    2006-09-01

    Biological ferric iron production was combined with ferric sulphate leaching of chalcopyrite concentrate and the effects of pH, Fe3+, temperature and solids concentration on the leaching were studied. The copper leaching rates were similar at pH of 1.0-1.8 and in the presence of 7-90 g L-1 Fe3+ despite massive iron precipitation with 90 g L-1 Fe3+. Increase of the leaching temperature from 50 degrees C to 86 degrees C and solids concentration from 1% to 10% increased the copper leaching rate. Increase in solids concentration from 1% to 10% decreased the copper yields from 80% to 40%. Stepwise addition of ferric iron did not improve the copper yields. CuFeS2, Ag and Cu1.96S potentials indicated the formation of a passivating layer, which consisted of jarosite and sulphur precipitates and which was responsible for the decreased leaching rates.

  19. Bioactivity and Applications of Sulphated Polysaccharides from Marine Microalgae

    Directory of Open Access Journals (Sweden)

    Rui Manuel Santos Costa de Morais

    2013-01-01

    Full Text Available Marine microalgae have been used for a long time as food for humans, such as Arthrospira (formerly, Spirulina, and for animals in aquaculture. The biomass of these microalgae and the compounds they produce have been shown to possess several biological applications with numerous health benefits. The present review puts up-to-date the research on the biological activities and applications of polysaccharides, active biocompounds synthesized by marine unicellular algae, which are, most of the times, released into the surrounding medium (exo- or extracellular polysaccharides, EPS. It goes through the most studied activities of sulphated polysaccharides (sPS or their derivatives, but also highlights lesser known applications as hypolipidaemic or hypoglycaemic, or as biolubricant agents and drag-reducers. Therefore, the great potentials of sPS from marine microalgae to be used as nutraceuticals, therapeutic agents, cosmetics, or in other areas, such as engineering, are approached in this review.

  20. Bioactivity and Applications of Sulphated Polysaccharides from Marine Microalgae

    Science.gov (United States)

    de Jesus Raposo, Maria Filomena; de Morais, Rui Manuel Santos Costa; de Morais, Alcina Maria Miranda Bernardo

    2013-01-01

    Marine microalgae have been used for a long time as food for humans, such as Arthrospira (formerly, Spirulina), and for animals in aquaculture. The biomass of these microalgae and the compounds they produce have been shown to possess several biological applications with numerous health benefits. The present review puts up-to-date the research on the biological activities and applications of polysaccharides, active biocompounds synthesized by marine unicellular algae, which are, most of the times, released into the surrounding medium (exo- or extracellular polysaccharides, EPS). It goes through the most studied activities of sulphated polysaccharides (sPS) or their derivatives, but also highlights lesser known applications as hypolipidaemic or hypoglycaemic, or as biolubricant agents and drag-reducers. Therefore, the great potentials of sPS from marine microalgae to be used as nutraceuticals, therapeutic agents, cosmetics, or in other areas, such as engineering, are approached in this review. PMID:23344113

  1. Calculation and optimization of the copper (II sulphate monohydrate from copper (II sulphate pentahydrate production process in a fluidized bed dryer

    Directory of Open Access Journals (Sweden)

    Kaluđerović-Radoičić Tatjana

    2015-01-01

    Full Text Available In this paper the process of the copper (II sulphate monohydrate from copper (II sulphate pentahydrate (also known as a Blue vitriol or Bluestone production was analyzed. Copper (II sulphate pentahydrate is one of the most important copper salts which has been known since the ancient Egyptians. In the nineteenth century its application as a fungicide was discovered which provoked wide industrial production. Molecule of the copper (II sulphate pentahydrate is a crystalohydrate with five water molecules linked by chemical bonds to a molecule of the copper (II sulphate. Copper (II sulphate exists as a series of compounds that differ in their degree of hydratation. The anhydrous form is a pale green or gray-white powder, whereas the pentahydrate (CuSO4•5H2O, the most commonly encountered salt, is bright blue. In order to obtain copper (II sulphate monohydrate from copper (II sulphate pentahydrate four water molecules need to be removed. To determine the optimum temperature and time required for the removal of four water molecules from a molecule of pentahydrate in this work thermogravimetric (TGA analysis was performed. Thermogravimetric (TGA analysis - dehydration of copper (II sulphate pentahydrate is done using simultaneous TG-DSC thermal analyzer DTG-Q600 SDT from TA Instruments. Analyzes was carried out for two type of samples, the sample containing particles of the average diameter equal to 0.17 mm and the particles of the average diameter 0.5 mm. In addition, fluidization and drying curve was determined using a semi-industrial fluidization column. On top, the industrial fluidization column aimed to produce 300 tones per month of copper (II sulphate monohydrate was designed. Material and energy calculations were performed using software packages Simprosys 3.0 and SuperPro Designer 5.1. Simprosys 3.0 is a software package designed for the modeling and simulation of a drying process as well as for 20 different unit operations. Super

  2. Can mesenchymal stem cell survive in hydroxyapatite sulphate?

    Directory of Open Access Journals (Sweden)

    Erica Kholinne

    2012-02-01

    Full Text Available Background: Many studies have reported the role of Mesenchymal Stem Cells (MSC in treating fractures. In case with bone defect, fracture healing needs not only osteogenic but also osteoconductive component (scaffold. Hydroxyapatite calcium sulphate (HA-CaSO4 being widely used as bone void filler, may serve as scaffold for MSC. However, the effect of this scaffold to the viability of MSC has not been evaluated before.Methods: MSC were isolated from the iliac marrow of a Giant Flamish rabbit, and expanded in DMEM using histogradient density. After one week, they were sub-cultured in a 25cc TC flask (passage 1 and have the medium replaced every 3 days. During the subculture, we embedded a HA-CaSO4 pellet into the flask. The cells were evaluated under inverted microscope at a weekly interval.Results: At the first week, MSC are difficult to be identified in microscope due to the large number of HA-CaSO4 crystals. By the third week however MSC have grown and the HA-CaSO4 crystals can readily be washed off by medium replacement. By the fourth weeks, MSC can be still seen on microscope.Conclusion: HA-CaSO4 could serve as a good scaffold due to its pellet shape and easily absorbed, thus providing revascularization which is essential for bone healing.In addition, HA-CaSO4 does not interfere with MSC survival. (Med J Indones 2012;21:8-12Keywords: Fracture healing, Hydroxyapatite Calcium Sulphate (HA-CaSO4, Mesenchymal Stem Cells (MSC

  3. Structural and functional characterization of barium zirconium titanate / epoxy composites

    Directory of Open Access Journals (Sweden)

    Filiberto González Garcia

    2011-12-01

    Full Text Available The dielectric behavior of composite materials (barium zirconium titanate / epoxy system was analyzed as a function of ceramic concentration. Structure and morphologic behavior of the composites was investigated by X-ray Diffraction (XRD, Fourier transformed infrared spectroscopy (FT-IR, Raman spectroscopy, field emission scanning electron microscopy (FE-SEM and transmission electron microscopy (TEM analyses. Composites were prepared by mixing the components and pouring them into suitable moulds. It was demonstrated that the amount of inorganic phase affects the morphology of the presented composites. XRD revealed the presence of a single phase while Raman scattering confirmed structural transitions as a function of ceramic concentration. Changes in the ceramic concentration affected Raman modes and the distribution of particles along into in epoxy matrix. Dielectric permittivity and dielectric losses were influenced by filler concentration.

  4. Synthesis and characterization of barium fluoride substituted zinc tellurite glasses

    Science.gov (United States)

    Aishwarya, K.; Vinitha, G.; Varma, G. Sreevidya; Asokan, S.; Manikandan, N.

    2017-12-01

    Glasses in the TeO2-ZnO-BaF2 system were prepared by standard melt quenching technique and were characterized for their thermal, optical and structural properties. Samples were found to show good thermal stability with values ranging above 100 °C for all the compositions. Optical bandgap and refractive index values were calculated from linear optical measurements using UV-Vis spectroscopy. Infrared spectra showed the presence of hydroxyl groups in the glasses indicating that the effect of fluorine was negligible in removing the hydroxyl impurities for the experimental conditions and compositions used. Raman measurements showed the modification occurring in the glass network due to addition of barium fluoride in terms of increase in the formation of non-bridging oxygen atoms compared to strong Te-O-Te linkages in the glass matrix.

  5. Synthesis and optical study of barium magnesium aluminate blue phosphors

    Science.gov (United States)

    Jeet, Suninder; Sharma, Manoj; Pandey, O. P.

    2015-05-01

    Europium doped barium magnesium aluminate (BaMgAl10O17:Eu2+) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl10O17(JCPDS 26-0163) along with an additional phase BaAl2O4(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f6 5d → 4f7 transition of Eu2+ which lies in the blue region of the visible spectrum.

  6. Synthesis and optical study of barium magnesium aluminate blue phosphors

    Energy Technology Data Exchange (ETDEWEB)

    Jeet, Suninder, E-mail: suninder.jeet@thapar.edu; Pandey, O. P., E-mail: oppandey@thapar.edu [School of Physics and Materials Science, Thapar University, Patiala (147003), Punjab (India); Sharma, Manoj, E-mail: manojnarad@sggswu.org [Department of Nanotechnology, Sri Guru Granth Sahib World University, Fatehgarh Sahib(146406), Punjab (India)

    2015-05-15

    Europium doped barium magnesium aluminate (BaMgAl{sub 10}O{sub 17}:Eu{sup 2+}) phosphor was prepared via solution combustion method at 550°C using urea as a fuel. Morphological and optical properties of the prepared sample was studied by X-ray diffraction (XRD), Transmission electron microscopy (TEM) and Photoluminescence spectroscopy (PL). XRD result showed the formation of pure phase BaMgAl{sub 10}O{sub 17}(JCPDS 26-0163) along with an additional phase BaAl{sub 2}O{sub 4}(JCPDS 01-082-1350). TEM image indicated the formation of faceted particles with average particle size 40 nm. From PL spectra, a broad emission band obtained at about 450 nm attributes to 4f{sup 6} 5d → 4f{sup 7} transition of Eu{sup 2+} which lies in the blue region of the visible spectrum.

  7. Impedance spectroscopy of perovskite barium substituted lead zinc niobate ceramics

    Science.gov (United States)

    Himanshu, A. K.; Choudhary, B. K.; Gupta, D. C.; Bandyopadhayay, S. K.; Sinha, T. P.

    2010-03-01

    The complex perovskite lead barium zinc niobate, (Pb 1-xBa x)(Zn 1/3Nb 2/3)O 3 ceramic at x=0.25 was prepared by a columbite precursor method. The microstructure analysis was done by scanning electron microscope. The field dependences of the dielectric response and the conductivity were measured in a frequency range from 100 Hz to 1 MHz and in a temperature range from 110 to 310 K. The frequency dependence of the loss peak is found to obey Arrhenius law with activation energy of ∼0.019 eV. An analysis of the real and imaginary parts of the dielectric permittivity with frequency has been performed, assuming a distribution of relaxation times as confirmed by Cole-Cole plot. The frequency dependent electrical data were also analyzed in the framework of the conductivity and modulus formalism. Both these formalisms provided qualitative similarities in the relaxation times.

  8. Effect of Nb on barium titanate prepared from citrate solutions

    Directory of Open Access Journals (Sweden)

    Stojanović Biljana D.

    2002-01-01

    Full Text Available The influence of the addition of dopants on the microstructure development and electrical properties of BaTiO3 doped with 0.2, 0.4, 0.6, 0.8 mol% of Nb and 0.01 mol% of Mn based compounds was studied. Doped barium titanate was prepared using the polymeric precursor method from citrate solutions. The powders calcined at 700°C for 4 hours were analysed by infrared (IR spectroscopy to verify the presence of carbonates, and by X-ray diffraction (XRD for phase formation. The phase composition, microstructure and dielectric properties show a strong dependence on the amount of added niobium.

  9. Study on a flexoelectric microphone using barium strontium titanate

    Science.gov (United States)

    Kwon, S. R.; Huang, W. B.; Zhang, S. J.; Yuan, F. G.; Jiang, X. N.

    2016-04-01

    In this study, a flexoelectric microphone was, for the first time, designed and fabricated in a bridge structure using barium strontium titanate (Ba0.65Sr0.35TiO3) ceramic and tested afterwards. The prototyped flexoelectric microphone consists of a 1.5 mm  ×  768 μm  ×  50 μm BST bridge structure and a silicon substrate with a cavity. The sensitivity and resonance frequency were designed to be 0.92 pC/Pa and 98.67 kHz, respectively. The signal to noise ratio was measured to be 74 dB. The results demonstrate that the flexoelectric microphone possesses high sensitivity and a wide working frequency range simultaneously, suggesting that flexoelectricity could be an excellent alternative sensing mechanism for microphone applications.

  10. Ionoluminescence of trivalent rare-earth-doped strontium barium niobate

    Energy Technology Data Exchange (ETDEWEB)

    Calvo del Castillo, H. [Departamento de Geologia y Geoquimica, Universidad Autonoma de Madrid, Modulo C-VI, Campus de Cantoblanco, 28049 Cantoblanco, Madrid (Spain); Universidad Nacional Automoma de Mexico, Instituto de Fisica, 04510 Ciudad Universitaria, Mexico D.F. (Mexico); Ruvalcaba, J.L. [Universidad Nacional Automoma de Mexico, Instituto de Fisica, 04510 Ciudad Universitaria, Mexico D.F. (Mexico); Bettinelli, M.; Speghini, A. [Dipartimento Scientifico e Tecnologico, Universita di Verona and INSTM, UdR Verona, Ca Vignal, Strada Le Grazie 15, I-37134 Verona (Italy); Barboza Flores, M. [Centro de Investigacion en Fisica, Universidad de Sonora, Hermosillo, Sonora (Mexico); Calderon, T. [Departamento de Geologia y Geoquimica, Universidad Autonoma de Madrid, Modulo C-VI, Campus de Cantoblanco, 28049 Cantoblanco, Madrid (Spain)], E-mail: tomas.calderon@uam.es; Jaque, D.; Garcia Sole, J. [Departamento de Fisica de Materiales, Universidad Autonoma de Madrid, 28049 Cantoblanco, Madrid (Spain)

    2008-05-15

    Ionoluminescence spectra for different rare-earth ion (Pr{sup 3+} and Eu{sup 3+})-activated Sr{sub x}Ba{sub 1-x}Nb{sub 2}O{sub 6} strontium barium niobate crystals (x=0.33 and 0.60) have been induced with a 3 MeV proton beam for a variety of beam current intensities (45, 40 and 20 nA). The proton-beam induced luminescent spectra have shown features associated with the presence of the rare-earth ion and some spectral features mostly related to the host crystal, which appear only for high beam current intensities. We have compared the ionoluminescence results to those obtained under UV light excitation (photoluminescence technique) where a direct excitation of the band gap would occur.

  11. Primary versus secondary achalasia: New signs on barium esophagogram

    Directory of Open Access Journals (Sweden)

    Pankaj Gupta

    2015-01-01

    Full Text Available Aim: To investigate new signs on barium swallow that can differentiate primary from secondary achalasia. Materials and Methods: Records of 30 patients with primary achalasia and 17 patients with secondary achalasia were reviewed. Clinical, endoscopic, and manometric data was recorded. Barium esophagograms were evaluated for peristalsis and morphology of distal esophageal segment (length, symmetry, nodularity, shouldering, filling defects, and "tram-track sign". Results: Mean age at presentation was 39 years in primary achalasia and 49 years in secondary achalasia. The mean duration of symptoms was 3.5 years in primary achalasia and 3 months in secondary achalasia. False-negative endoscopic results were noted in the first instance in five patients. In the secondary achalasia group, five patients had distal esophageal segment morphology indistinguishable from that of primary achalasia. None of the patients with primary achalasia and 35% patients with secondary achalasia had a length of the distal segment approaching combined height of two vertebral bodies. None of the patients with secondary achalasia and 34% patients with primary achalasia had maximum caliber of esophagus approaching combined height of two vertebral bodies. Tertiary contractions were noted in 90% patients with primary achalasia and 24% patients with secondary achalasia. Tram-track sign was found in 55% patients with primary achalasia. Filling defects in the distal esophageal segment were noted in 94% patients with secondary achalasia. Conclusion: Length of distal esophageal segment, tertiary contractions, tram-track sign, and filling defects in distal esophageal segment are useful esophagographic features distinguishing primary from secondary achalasia.

  12. Anomalous permittivity in fine-grain barium titanate

    Science.gov (United States)

    Ostrander, Steven Paul

    Fine-grain barium titanate capacitors exhibit anomalously large permittivity. It is often observed that these materials will double or quadruple the room temperature permittivity of a coarse-grain counterpart. However, aside from a general consensus on this permittivity enhancement, the properties of the fine-grain material are poorly understood. This thesis examines the effect of grain size on dielectric properties of a self-consistent set of high density undoped barium titanate capacitors. This set included samples with grain sizes ranging from submicron to ˜20 microns, and with densities generally above 95% of the theoretical. A single batch of well characterized powder was milled, dry-pressed then isostatically-pressed. Compacts were fast-fired, but sintering temperature alone was used to control the grain size. With this approach, the extrinsic influences are minimized within the set of samples, but more importantly, they are normalized between samples. That is, with a single batch of powder and with identical green processing, uniform impurity concentration is expected. The fine-grain capacitors exhibited a room temperature permittivity of ˜5500 and dielectric losses of ˜2%. The Curie-temperature decreased by {˜}5sp°C from that of the coarse-grain material, and the two ferroelectric-ferroelectric phase transition temperatures increased by {˜}10sp°C. The grain size induced permittivity enhancement was only active in the tetragonal and orthorhombic phases. Strong dielectric anomalies were observed in samples with grain size as small as {˜}0.4\\ mum. It is suggested that the strong first-order character observed in the present data is related to control of microstructure and stoichiometry. Grain size effects on conductivity losses, ferroelectric losses, ferroelectric dispersion, Maxwell-Wagner dispersion, and dielectric aging of permittivity and loss were observed. For the fine-grain material, these observations suggest the suppression of domain wall

  13. Bioslurry treatment for soils contaminated with very high concentrations of 2,4,6-trinitrophenylmethylnitramine (tetryl).

    Science.gov (United States)

    Fuller, Mark E; Kruczek, Jessica; Schuster, Rachel L; Sheehan, Pamela L; Arienti, Per M

    2003-06-27

    Past and current DoD activities have resulted in the contamination of soil, sediment and groundwater with various explosive compounds. This research was undertaken to determine the effectiveness of a soil bioslurry process for remediation of soil with very high concentrations of 2,4,6-trinitrophenylmethylnitramine (tetryl). A 99.9% reduction in tetryl concentrations (from 100,000 to below 100 mg/kg) was achieved in 180 to 200 days. A variety of process modifications (i.e. addition of fertilizer, microbial biomass, purging with nitrogen, etc.) that were performed during the course of the experiment did not increase the tetryl biodegradation rate beyond the rates of degradation without modifications. Subsequent batches of soil added as a 25% (v/v) replacement of the slurry were also degraded. These results indicate the potential for this process to remediate highly contaminated soils at many former and current ammunition manufacturing sites.

  14. Subcutaneous absorption kinetics of two highly concentrated preparations of recombinant human growth hormone

    DEFF Research Database (Denmark)

    Laursen, Torben; Jørgensen, Jens Otto Lunde; Susgaard, Søren

    1993-01-01

    hours. Samples were taken every 30 minutes for 6 hours and then hourly. MAIN OUTCOME MEASURES: Bioavailability (F) and absorption dynamics of human GH were measured. The relative absorption fractions estimated from the areas under the individual serum concentration curves from 0 to 24 hours......Abstract OBJECTIVE: The relative bioavailability of two highly concentrated (12 IU/ml) formulations of biosynthetic human growth hormone (GH) administered subcutaneously was compared. DESIGN: A randomized, crossover study. Conventional GH therapy was withdrawn 72 hours before each study period...... of signs of endogenous GH secretion. INTERVENTIONS: At the start of each study period, GH 3 IU/m2 was injected subcutaneously. The two formulations, PenFill and PenSet, differ in the buffers used and in the relative content of mannitol and glycine. Serum profiles of GH were monitored frequently for 24...

  15. A Positron Annihilation Study of Copper Containing a High Concentration of Krypton

    DEFF Research Database (Denmark)

    Eldrup, Morten Mostgaard; Evans, John H.

    1982-01-01

    Bulk Cu samples containing up to 4 at.% Kr have been produced by the Harwell combined ion implantation and sputtering method at temperatures near ambient, and then examined by the positron annihilation technique. Both angular correlation and lifetime measurements were made and, in addition......, the specimen substructure was examined by transmission electron microscopy. The main results were a very large increase in angular correlation peak counts and a single measured positron lifetime of approximately 260 ps. The possible defects which might act as positron traps, and give rise to the observed...... changes, are discussed, with particular emphasis on the very high concentration of small Kr bubbles (approximately 1.5-3 nm in diameter) in the material....

  16. Improving the Output Power Stability of a High Concentration Photovoltaic System with Supercapacitors: A Preliminary Evaluation

    Directory of Open Access Journals (Sweden)

    Yu-Pei Huang

    2015-01-01

    Full Text Available The output power of a high concentration photovoltaic (HCPV system is very sensitive to fluctuating tracking errors and weather patterns. To help compensate this shortcoming, supercapacitors have been successfully incorporated into photovoltaic systems to improve their output power stability. This study examined the output power stability improvement of an HCPV module with a supercapacitor integrated into its circuit. Furthermore, the equivalent model of the experimental circuit is presented and analyzed. Experimental results suggest that integrating a supercapacitor into an HCPV module could improve its output power stability and further extend its acceptance angle. This paper provides preliminary data of the improvement and its evaluation method, which could be utilized for further improvements to an HCPV system.

  17. Green synthesis of highly concentrated aqueous colloidal solutions of large starch-stabilised silver nanoplatelets.

    Science.gov (United States)

    Cheng, Fei; Betts, Jonathan W; Kelly, Stephen M; Hector, Andrew L

    2015-01-01

    A simple, environmentally friendly and cost-effective method has been developed to prepare a range of aqueous silver colloidal solutions, using ascorbic acid as a reducing agent, water-soluble starch as a combined crystallising, stabilising and solubilising agent, and water as the solvent. The diameter of silver nanoplatelets increases with higher concentrations of AgNO3 and starch. The silver nanoparticles are also more uniform in shape the greater the diameter of the nanoparticles. Colloidal solutions with a very high concentration of large, flat, hexagonal silver nanoplatelets (~230 nm in breadth) have been used to deposit and fix an antibacterial coating of these large starch-stabilised silver nanoplates on commercial cotton fibres, using a simple dip-coating process using water as the solvent, in order to study the dependence of the antibacterial properties of these nanoplatelets on their size. Copyright © 2014 Elsevier B.V. All rights reserved.

  18. Bottom-Up Cost Analysis of a High Concentration PV Module; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, K.; Woodhouse, M.; Lee, H.; Smestad, G.

    2015-04-13

    We present a bottom-up model of III-V multi-junction cells, as well as a high concentration PV (HCPV) module. We calculate $0.65/Wp(DC) manufacturing costs for our model HCPV module design with today’s capabilities, and find that reducing cell costs and increasing module efficiency offer the promising pathways for future cost reductions. Cell costs could be significantly reduced via an increase in manufacturing scale, substrate reuse, and improved manufacturing yields. We also identify several other significant drivers of HCPV module costs, including the Fresnel lens primary optic, module housing, thermal management, and the receiver board. These costs could potentially be lowered by employing innovative module designs.

  19. High concentrations of KCl release noradrenaline from noradrenergic neurons in the rat anococcygeus muscle

    Directory of Open Access Journals (Sweden)

    C.B.L. Araujo

    2003-01-01

    Full Text Available The aim of the present study was to investigate the effects of high concentrations of KCl in releasing noradrenaline from sympathetic nerves and its actions on postsynaptic alpha-adrenoceptors. We measured the isotonic contractions induced by KCl in the isolated rat anococcygeus muscle under different experimental conditions. The contractile responses induced by KCl were inhibited by alpha-adrenoceptor antagonists in 2.5 mM Ca2+ solution. Prazosin reduced the maximum effect from 100 to 53.9 ± 10.2% (P<0.05 while the pD2 values were not changed. The contractile responses induced by KCl were abolished by prazosin in Ca2+-free solution (P<0.05. Treatment of the rats with reserpine reduced the maximum effect induced by KCl as compared to the contractile responses induced by acetylcholine from 339.5 ± 157.8 to 167.3 ± 65.5% (P<0.05, and increased the pD2 from 1.57 ± 0.01 to 1.65 ± 0.006 (P<0.05, but abolished the inhibitory effect of prazosin (P<0.05. In contrast, L-NAME increased the contractile responses induced by 120 mM KCl by 6.2 ± 2.3% (P<0.05, indicating that KCl could stimulate the neurons that release nitric oxide, an inhibitory component of the contractile response induced by KCl. Our results indicate that high concentrations of KCl induce the release of noradrenaline from noradrenergic neurons, which interacts with alpha1-adrenoceptors in smooth muscle cells, producing a contractile response in 2.5 mM Ca2+ (100% and in Ca2+-free solution, part of which is due to a direct effect of KCl on the rat anococcygeus muscle.

  20. Impact of High Concentration Solutions on Hydraulic Properties of Geosynthetic Clay Liner Materials

    Directory of Open Access Journals (Sweden)

    Lei Liu

    2012-11-01

    Full Text Available This study focuses on the impact of landfill high concentration solutions erosion on geosynthetic clay liner (GCL materials permeability. The permeation tests on the GCL, submerged using different kinds of solutions with different concentrations, were carried out systematically by taking these chemical solutions as permeant liquids. Based on seasonal variations of ion concentrations in Chenjiachong landfill leachate (Wuhan Province, CaCl2, MgCl2, NaCl, and KCl were selected as chemical attack solutions to carry out experimental investigations under three concentrations (50 mM, 100 mM, 200 mM and soak times (5, 10, and 20 days. The variation law of the GCL hydraulic conductivity under different operating conditions was analyzed. The relationship between GCL hydraulic conductivity, chemical solutions categories, concentrations, and soak times were further discussed. The GCL hydraulic conductivity, when soaked and permeated with high concentration chemical solutions, increases several times or exceeds two orders of magnitude, as compared with the permeation test under normal conditions that used water as the permeant liquid. This reveals that GCL is very susceptible to chemical attack. For four chemical solutions, the chemical attack effect on GCL hydraulic conductivity is CaCl2 > MgCl2 > KCl > NaCl. The impact of soak times on GCL hydraulic conductivity is the cooperative contribution of the liner chemical attack reaction and hydration swelling. A longer soak time results in a more advantageous hydration swelling effect. The chemical attack reaction restrains the hydration swelling of the GCL. Moreover, the GCL hydraulic conductivity exponentially decreases with the increased amplitude of thickness.

  1. Core Sulphate-Reducing Microorganisms in Metal-Removing Semi-Passive Biochemical Reactors and the Co-Occurrence of Methanogens

    Directory of Open Access Journals (Sweden)

    Maryam Rezadehbashi

    2018-02-01

    Full Text Available Biochemical reactors (BCRs based on the stimulation of sulphate-reducing microorganisms (SRM are emerging semi-passive remediation technologies for treatment of mine-influenced water. Their successful removal of metals and sulphate has been proven at the pilot-scale, but little is known about the types of SRM that grow in these systems and whether they are diverse or restricted to particular phylogenetic or taxonomic groups. A phylogenetic study of four established pilot-scale BCRs on three different mine sites compared the diversity of SRM growing in them. The mine sites were geographically distant from each other, nevertheless the BCRs selected for similar SRM types. Clostridia SRM related to Desulfosporosinus spp. known to be tolerant to high concentrations of copper were members of the core microbial community. Members of the SRM family Desulfobacteraceae were dominant, particularly those related to Desulfatirhabdium butyrativorans. Methanogens were dominant archaea and possibly were present at higher relative abundances than SRM in some BCRs. Both hydrogenotrophic and acetoclastic types were present. There were no strong negative or positive co-occurrence correlations of methanogen and SRM taxa. Knowing which SRM inhabit successfully operating BCRs allows practitioners to target these phylogenetic groups when selecting inoculum for future operations.

  2. Severe acute cholangitis after endoscopic sphincterotomy induced by barium examination: A case report

    Science.gov (United States)

    Zhang, Zhen-Hai; Wu, Ya-Guang; Qin, Cheng-Kun; Su, Zhong-Xue; Xu, Jian; Xian, Guo-Zhe; Wu, Shuo-Dong

    2012-01-01

    Endoscopic sphincterotomy (EST) is considered as a possible etiological factor for severe cholangitis. We herein report a case of severe cholangitis after endoscopic sphincterotomy induced by barium examination. An adult male patient presented with epigastric pain was diagnosed as having choledocholithiasis by ultrasonography. EST was performed and the stone was completely cleaned. Barium examination was done 3 d after EST and severe cholangitis appeared 4 h later. The patient was recovered after treated with tienam for 4 d. Barium examination may induce severe cholangitis in patients after EST, although rare, barium examination should be chosen cautiously. Cautions should be also used when EST is performed in patients younger than 50 years to avoid the damage to the sphincter of Oddi. PMID:23112564

  3. Sulphation of acetaminophen by the human cytosolic sulfotransferases: a systematic analysis.

    Science.gov (United States)

    Yamamoto, Akihiro; Liu, Ming-Yih; Kurogi, Katsuhisa; Sakakibara, Yoichi; Saeki, Yuichi; Suiko, Masahito; Liu, Ming-Cheh

    2015-12-01

    Sulphation is known to be critically involved in the metabolism of acetaminophen in vivo. This study aimed to systematically identify the major human cytosolic sulfotransferase (SULT) enzyme(s) responsible for the sulphation of acetaminophen. A systematic analysis showed that three of the twelve human SULTs, SULT1A1, SULT1A3 and SULT1C4, displayed the strongest sulphating activity towards acetaminophen. The pH dependence of the sulphation of acetaminophen by each of these three SULTs was examined. Kinetic parameters of these three SULTs in catalysing acetaminophen sulphation were determined. Moreover, sulphation of acetaminophen was shown to occur in HepG2 human hepatoma cells and Caco-2 human intestinal epithelial cells under the metabolic setting. Of the four human organ samples tested, liver and intestine cytosols displayed considerably higher acetaminophen-sulphating activity than those of lung and kidney. Collectively, these results provided useful information concerning the biochemical basis underlying the metabolism of acetaminophen in vivo previously reported. © The Authors 2015. Published by Oxford University Press on behalf of the Japanese Biochemical Society. All rights reserved.

  4. Migration and attenuation of agrochemical pollutants: insights from isotopic analysis of groundwater sulphate

    Science.gov (United States)

    Moncaster, S. J.; Bottrell, S. H.; Tellam, J. H.; Lloyd, J. W.; Konhauser, K. O.

    2000-04-01

    Existing hydrochemical and hydrogeological models of pollution migration and attenuation in the Lincolnshire Limestone aquifer of eastern England have been examined in the light of the results of a groundwater sulphate sulphur isotope investigation. This has allowed the distinction of different sources of sulphate and their relative importance in different parts of the aquifer. The principal sources are 34S-depleted inputs, derived from the oxidation of pyrite within both the aquifer matrix material and the overlying mudstone deposits, and 34S-enriched anthropogenic inputs which are derived from acid rain fallout augmented by agrochemicals. Groundwaters sampled over the outcrop zone of the aquifer have sulphate δ 34S dominated by contemporary acid rain inputs in the recharge waters. A down-dip decrease in the 34S content of groundwater sulphate over the unconfined and shallow confined areas of the aquifer is indicative of a progressive increase in the significance of pyrite-derived sulphate in the system. The contribution of sulphate from this source is large and indicates that pollution front penetration (previously based on total sulphate concentrations) is more restricted than previously thought. Moreover, the extent of pyrite oxidation is greater than can be accounted for by dissolved O 2 and the additional component corresponds to that which would be expected from reduction of nitrate using pyrite as the electron donor. We suggest that this mechanism is responsible for denitrification in the aquifer, but that it will be ultimately limited by pyrite availability near fissure surfaces where the reaction takes place.

  5. Sulphate reduction and the removal of carbon and ammonia in a laboratory-scale constructed wetland.

    Science.gov (United States)

    Wiessner, A; Kappelmeyer, U; Kuschk, P; Kästner, M

    2005-11-01

    Sulphate is a normal constituent of domestic wastewater and reduced sulphur compounds are known to be potent inhibitors of plant growth and certain microbial activities. However, the knowledge about sulphate reduction and the effect on the removal of C and N in constructed wetlands is still limited. Investigations in laboratory-scale constructed wetland reactors were performed to evaluate the interrelation of carbon and nitrogen removal with the sulphate reduction by use of artificial domestic wastewater. Carbon removal was found to be only slightly affected and remained at high levels of efficiency (75-90%). Only at sulphate reduction intensities above 75 mgl(-1) (50% removal), a decrease of carbon removal of up to 20% was observed. A highly contrary behaviour of ammonia removal was found in general, which decreased exponentially from 75% to 35% related to a linear increase of sulphate reduction up to 75 mgl(-1) (50% removal). Since sulphate removal is considered to be dependant on the load of electron donors, the carbon load of the system was varied. Variation of the load changed the intensities of sulphate reduction immediately, but did not influence the carbon removal effectiveness. Doubling of the carbon concentration of 200 mgl(-1) BOD(5) for domestic wastewater usually led to sulphate reduction of up to 150 mgl(-1) (100% removal). The findings show that, particularly in constructed wetland systems, the sulphur cycle in the rhizosphere is of high importance for performance of the waste water treatment and may initiate a reconsideration of the amount of sulphate present in the tap water systems.

  6. Comparison of Calcium and Barium Microcapsules as Scaffolds in the Development of Artificial Dermal Papillae

    OpenAIRE

    Liu, Yang; Lin, Changmin; Zeng, Yang; Li, Haihong; Cai, Bozhi; Huang, Keng; Yuan, Yanping; Li, Yu

    2016-01-01

    This study aimed to develop and evaluate barium and calcium microcapsules as candidates for scaffolding in artificial dermal papilla. Dermal papilla cells (DPCs) were isolated and cultured by one-step collagenase treatment. The DPC-Ba and DPC-Ca microcapsules were prepared by using a specially designed, high-voltage, electric-field droplet generator. Selected microcapsules were assessed for long-term inductive properties with xenotransplantation into Sprague-Dawley rat ears. Both barium and c...

  7. Comparison of the reflectance characteristics of polytetrafluoroethylene and barium sulfate paints

    Science.gov (United States)

    Butner, C. L.; Schutt, J. B.; Shai, M. C.

    1984-01-01

    Preliminary results are presented of the directional reflectance measurements taken on two tetrafluorethylene (TFE) paints formulated with silicone binders. Both paints are found to be more Lambertian than barium sulfate paint and pressed powder, although the pigment to binder ratios for barium sulfate and TFE paints are about 133 and 3.3 to 1, respectively. The TFE paints exhibit total visible reflectances above 90 percent and offer surfaces that are not significantly affected by water.

  8. Preparation method of barium sulfate from mercuric sulfide for sulfur isotope ratio measurement

    OpenAIRE

    Kawano, Maya; Tsutsui, Akiho; Minami, Takeshi

    2015-01-01

    [Abstract]The sulfur isotope ratio in mercuric sulfide called vermilion has been measured for identification of the original mines of vermilion used in ancient burial mounds and antiquities. Barium sulfate is prepared from vermilion for measurement of the sulfur isotope ratio. However, as vermilion is composed of sulfur and mercury, one issue is the prevention of contamination of barium sulfate by mercury. Mercury is a toxic metal and pollutes the piping system of analytical instruments. The ...

  9. Barium isotopes in Allende meteorite - Evidence against an extinct superheavy element

    Science.gov (United States)

    Lewis, R. S.; Anders, E.; Shimamura, T.; Lugmair, G. W.

    1983-01-01

    Carbon and chromite fractions from the Allende meteorite that contain isotopically anomalous xenon-131 to xenon-136 (carbonaceous chondrite fission or CCF xenon) at up to 5 x 10 to the 11th atoms per gram show no detectable isotopic anomalies in barium-130 to barium-138. This rules out the possibility that the CCF xenon was formed by in situ fission of an extinct superheavy element. Apparently the CCF xenon and its carbonaceous carrier are relics from stellar nucleosynthesis.

  10. Precipitation of barite by Myxococcus xanthus: possible implications for the biogeochemical cycle of barium.

    Science.gov (United States)

    González-Muñoz, Maria Teresa; Fernández-Luque, Belén; Martínez-Ruiz, Francisca; Ben Chekroun, Kaoutar; Arias, José María; Rodríguez-Gallego, Manuel; Martínez-Cañamero, Magdalena; de Linares, Concepción; Paytan, Adina

    2003-09-01

    Bacterial precipitation of barite (BaSO(4)) under laboratory conditions is reported for the first time. The bacterium Myxococcus xanthus was cultivated in a solid medium with a diluted solution of barium chloride. Crystallization occurred as a result of the presence of live bacteria and the bacterial metabolic activity. A phosphorous-rich amorphous phase preceded the more crystalline barite formation. These experiments may indicate the involvement of bacteria in the barium biogeochemical cycle, which is closely related to the carbon cycle.

  11. Effect of Marble Dust Addition on the Sulphate Resistance of Glass Fiber Reinforced Cement Mortars

    OpenAIRE

    Alişer, Birsu; YILDIZ, Servet; Oğuzhan KELEŞTEMUR

    2016-01-01

    In this study, effect of marble dust addition on the sulphate resistance of glass fiber reinforced cement mortar exposed to sulphate attack was investigated. For this purpose, marble dust was added by replacing with filler material 10%, 20% , 30%, 40%, and 50% ratios by volume to mortars samples containing 0 kg/m3, 0.25 kg/m3, 0.50 kg/m3, 0.75 kg/m3 and 1 kg/m3 glass fiber. Length changes and capillary water absorption of the mortar samples under sulphate attack were determined. As a result o...

  12. Preparation and Physiological activities of sulphated derivative extracted from corn bran

    Science.gov (United States)

    Mo, Qing; Dai, Linghao; Ma, Jianjun; Zhao, Xiaojing; Zhu, Linghui

    2017-05-01

    In the present study, the sulphated derivative (S-CBP) with the degree of substitution (0.46) was successfully prepared from the polysaccharide extracted from corn bran. Compared with native polysaccharide, the structures of the sulphated derivative were confirmed by FT-IR and SEC-LLS and the molecular weight were changed by chemical modification. Sulfation enhanced the antioxidant activities in a dose-dependent way, which seemed to be dependent on the character of the substituted group. The results suggest that the sulphated derivative, extracted from corn bran, are potential natural antioxidant and blood fat reduce agent.

  13. Conductometric and volumetric study of copper sulphate in aqueous ethanol solutions at different temperatures

    OpenAIRE

    Esam A Gomaa; Negm, Amr; Tahoon, Mohamed A.

    2016-01-01

    An Anton Par Model 55 densimeter was used to measure the densities of copper sulphate solutions in H2O and EtOH–H2O at 298.15 K, 303.15 K, 308.15 K, and 313.15 K. The acquired information was used to ascertain the apparent molar volumes, limiting partial molar volumes, and transfer partial molar volumes of copper sulphate. These computed parameters were utilized to decipher the solute–solute and solute–solvent interactions of copper sulphate in an aqueous ethanol solution. The ion solvation b...

  14. Comparison of Calcium and Barium Microcapsules as Scaffolds in the Development of Artificial Dermal Papillae.

    Science.gov (United States)

    Liu, Yang; Lin, Changmin; Zeng, Yang; Li, Haihong; Cai, Bozhi; Huang, Keng; Yuan, Yanping; Li, Yu

    2016-01-01

    This study aimed to develop and evaluate barium and calcium microcapsules as candidates for scaffolding in artificial dermal papilla. Dermal papilla cells (DPCs) were isolated and cultured by one-step collagenase treatment. The DPC-Ba and DPC-Ca microcapsules were prepared by using a specially designed, high-voltage, electric-field droplet generator. Selected microcapsules were assessed for long-term inductive properties with xenotransplantation into Sprague-Dawley rat ears. Both barium and calcium microcapsules maintained xenogenic dermal papilla cells in an immunoisolated environment and induced the formation of hair follicle structures. Calcium microcapsules showed better biocompatibility, permeability, and cell viability in comparison with barium microcapsules. Before 18 weeks, calcium microcapsules gathered together, with no substantial immune response. After 32 weeks, some microcapsules were near inflammatory cells and wrapped with fiber. A few large hair follicles were found. Control samples showed no marked changes at the implantation site. Barium microcapsules were superior to calcium microcapsules in structural and mechanical stability. The cells encapsulated in hydrogel barium microcapsules exhibited higher short-term viability. This study established a model to culture DPCs in 3D culture conditions. Barium microcapsules may be useful in short-term transplantation study. Calcium microcapsules may provide an effective scaffold for the development of artificial dermal papilla.

  15. Barium swallow study in routine clinical practice: a prospective study in patients with chronic cough.

    Science.gov (United States)

    Nin, Carlos Shuler; Marchiori, Edson; Irion, Klaus Loureiro; Paludo, Artur de Oliveira; Alves, Giordano Rafael Tronco; Hochhegger, Daniela Reis; Hochhegger, Bruno

    2013-01-01

    To assess the routine use of barium swallow study in patients with chronic cough. Between October of 2011 and March of 2012, 95 consecutive patients submitted to chest X-ray due to chronic cough (duration > 8 weeks) were included in the study. For study purposes, additional images were obtained immediately after the oral administration of 5 mL of a 5% barium sulfate suspension. Two radiologists systematically evaluated all of the images in order to identify any pathological changes. Fisher's exact test and the chi-square test for categorical data were used in the comparisons. The images taken immediately after barium swallow revealed significant pathological conditions that were potentially related to chronic cough in 12 (12.6%) of the 95 patients. These conditions, which included diaphragmatic hiatal hernia, esophageal neoplasm, achalasia, esophageal diverticulum, and abnormal esophageal dilatation, were not detected on the images taken without contrast. After appropriate treatment, the symptoms disappeared in 11 (91.6%) of the patients, whereas the treatment was ineffective in 1 (8.4%). We observed no complications related to barium swallow, such as contrast aspiration. Barium swallow improved the detection of significant radiographic findings related to chronic cough in 11.5% of patients. These initial findings suggest that the routine use of barium swallow can significantly increase the sensitivity of chest X-rays in the detection of chronic cough-related etiologies.

  16. Experimental studies on 3D printing of barium titanate ceramics for medical applications

    Directory of Open Access Journals (Sweden)

    Schult Mark

    2016-09-01

    Full Text Available The present work deals with the 3D printing of porous barium titanate ceramics. Barium titanate is a biocompatible material with piezoelectric properties. Due to insufficient flowability of the starting material for 3D printing, the barium titanate raw material has been modified in three different ways. Firstly, barium titanate powder has been calcined. Secondly, flow additives have been added to the powder. And thirdly, flow additives have been added to the calcined powder. Finally, a polymer has been added to the three materials and specimens have been printed from these three material mixtures. The 3D printed parts were then sintered at 1320°C. The sintering leads to shrinkage which differs between 29.51–71.53% for the tested material mixtures. The porosity of the parts is beneficial for cell growth which is relevant for future medical applications. The results reported in this study demonstrate the possibility to fabricate porous piezoelectric barium titanate parts with a 3D printer that can be used for medical applications. 3D printed porous barium titanate ceramics can especially be used as scaffold for bone tissue engineering, where the bone formation can be promoted by electrical stimulation.

  17. Barium swallow study in routine clinical practice: a prospective study in patients with chronic cough

    Directory of Open Access Journals (Sweden)

    Carlos Shuler Nin

    2013-12-01

    Full Text Available OBJECTIVE: To assess the routine use of barium swallow study in patients with chronic cough.METHODS: Between October of 2011 and March of 2012, 95 consecutive patients submitted to chest X-ray due to chronic cough (duration > 8 weeks were included in the study. For study purposes, additional images were obtained immediately after the oral administration of 5 mL of a 5% barium sulfate suspension. Two radiologists systematically evaluated all of the images in order to identify any pathological changes. Fisher's exact test and the chi-square test for categorical data were used in the comparisons.RESULTS: The images taken immediately after barium swallow revealed significant pathological conditions that were potentially related to chronic cough in 12 (12.6% of the 95 patients. These conditions, which included diaphragmatic hiatal hernia, esophageal neoplasm, achalasia, esophageal diverticulum, and abnormal esophageal dilatation, were not detected on the images taken without contrast. After appropriate treatment, the symptoms disappeared in 11 (91.6% of the patients, whereas the treatment was ineffective in 1 (8.4%. We observed no complications related to barium swallow, such as contrast aspiration.CONCLUSIONS: Barium swallow improved the detection of significant radiographic findings related to chronic cough in 11.5% of patients. These initial findings suggest that the routine use of barium swallow can significantly increase the sensitivity of chest X-rays in the detection of chronic cough-related etiologies.

  18. Technical development: CT colonography without cathartic cleansing and with barium as the sole tagging agent

    Science.gov (United States)

    Lefere, Philippe; Gryspeerdt, Stefaan; Baekelandt, Marc; Van Holsbeeck, Bartel

    2004-04-01

    The purpose of this study was to perform CT colonography (CTC) without cathartic colon cleansing. Four groups of 3 patients were prepared the day before CTC with a dedicated low residue diet, a hydration control allowing 2 liters of fluid intake and barium as tagging agent. Four different barium regimens were investigated. Groups 1 and 3 ingested barium over 1 day at different concentrations and groups 2 and 4 over 2 days. The barium volume to drink the day before CTC was 750 ml in groups 1 and 2 and 50 ml in groups 3 and 4. The fluid, density measurements of the fecal residue and tagging efficacy were evaluated. All fecal residue with densities >= 150 H.U. was electronically labeled. Per segment a visual labeling score (0, 25, 50, 75, 100%) was performed. The fluid was evaluated according to its proportion to the maximum anteroposterior diameter of the colonic segment where it was detected. No significant differences in densities of tagged residue were detected. The visual labeling scores varied between 90 and 100% in all segments. There were 6 fluid levels: 5 covering < 10% and one covering 50% of the colonic lumen. The lowest density of the fluid was 360 H.U. In this preliminary study we could conclude that CTC without cathartic cleansing and with barium produced efficient labeling of fecal residue. The barium intake could be reduced to one day and to 50 ml.

  19. Sulphate-reducing bacteria associated with biocorrosion: a review

    Directory of Open Access Journals (Sweden)

    Tania C. de Araujo-Jorge

    1992-09-01

    Full Text Available Biocorrosion means any process of corrosion in wich microorganisms are somehow involved. As far as the petroleum industry is concerned, the anaerobic type is the more important, with Sulphate-Reducing Bacteria (SRB accouting for half of the described processes. SRB are obligate anaerobs that use sulphur, sulphate or other oxidized sulphur compounds as oxidizing agents when decomposing organic material. A typical product of SRB metabolism, hydrogen sulphide -H2S-, is extremely toxic. In the present work we review the literature on mechanisms underlying biocorrosive process in wich SRB are involved and summarize some of the ultrastructural and eletrochemical work developed using SRB obtained from water injection flow in wells located on PETROBRAS offshore marine plataforms, sampled directly in the field over metallic probes, or cultured under laboratory conditions. Biofilms develop when SRB adhere to inert surfaces. A high diversity of morphological types is found inside these biofilms. Their extracellular matrix is highly hydrated and mainly anionic, as shown by its avid reaction with cationic compounds like ruthenium red. We have noted that variations in iron contet lead to interesting changes in the ultrastructure of the bacterial cell coat and also in the rate of corrosion induced in metallic test cupons. Since routine methods to prevent and treat SRB contamination and biodeterioration involve the use of biocides that are toxic and always have some environmental impact, an accurate diagnosis of biocorrosion is always required prior to a treatment decision. We developed a method that detects and semi-quantifies the presence of living or dead SRB by using free silver potentials as an indicator of corrosive action by SRB-associated sulphides. We found a correlation between sulphide levels (determined either by spectrophotometry, or using a silver electrode -E(Ag- that measured changes in free potentials induced by the presence of exogeneously

  20. Bioconversion of High Concentrations of Hydrogen Sulfide to Elemental Sulfur in Airlift Bioreactor

    Directory of Open Access Journals (Sweden)

    Mohamed Abdel-Monaem Zytoon

    2014-01-01

    Full Text Available Several bioreactor systems are used for biological treatment of hydrogen sulfide. Among these, airlift bioreactors are promising for the bioconversion of hydrogen sulfide into elemental sulfur. The performance of airlift bioreactors is not adequately understood, particularly when directly fed with hydrogen sulfide gas. The objective of this paper is to investigate the performance of an airlift bioreactor fed with high concentrations of H2S with special emphasis on the effect of pH in combination with other factors such as H2S loading rate, oxygen availability, and sulfide accumulation. H2S inlet concentrations between 1,008 ppm and 31,215 ppm were applied and elimination capacities up to 113 g H2S m−3 h−1 were achieved in the airlift bioreactor under investigation at a pH range 6.5–8.5. Acidic pH values reduced the elimination capacity. Elemental sulfur recovery up to 95% was achieved under oxygen limited conditions (DO 500 mg/L at pH values 8.0–8.5, and near 100% removal efficiency was achieved. Overall, the resident microorganisms in the studied airlift bioreactor favored pH values in the alkaline range. The bioreactor performance in terms of elimination capacity and sulfur recovery was better at pH range 8–8.5.

  1. Electrical and Thermal Performance Analysis for a Highly Concentrating Photovoltaic/Thermal System

    Directory of Open Access Journals (Sweden)

    Ning Xu

    2015-01-01

    Full Text Available A 30 kW highly concentrating photovoltaic/thermal (HCPV/T system has been constructed and tested outdoors. The HCPV/T system consists of 32 modules, each of which consists of point-focus Fresnel lens and triple-junction solar cells with a geometric concentrating ratio of 1090x. The modules are connected to produce both electrical and thermal energy. Performance analysis has been conducted from the viewpoint of thermodynamics. The experimental results show that highest photovoltaic efficiency of 30% and instantaneous thermal efficiency of 30% can be achieved at the same time, which means the total solar energy conversion efficiency of the HCPV/T system is higher than 60%. The photovoltaic efficiency increases with direct irradiance when the direct irradiance is below 580 W/m2, but it remains nearly unchanged when the direct irradiation is higher than 580 W/m2. The instantaneous thermal efficiency decreases during water heating process. However, the electrical performance of the system is not affected obviously by water temperature. Highest exergetic efficiency of 35.4% can be produced by the HCPV/T system. The exergetic efficiency is mainly affected by irradiation level, which is similar to the characteristics of photovoltaic performance.

  2. Polyaspartic Acid Concentration Controls the Rate of Calcium Phosphate Nanorod Formation in High Concentration Systems

    Energy Technology Data Exchange (ETDEWEB)

    Krogstad, Daniel V. [Biosystems and; Wang, Dongbo [Biosystems and; Lin-Gibson, Sheng [Biosystems and

    2017-08-31

    Polyelectrolytes are known to greatly affect calcium phosphate (CaP) mineralization. The reaction kinetics as well as the CaP phase, morphology and aggregation state depend on the relative concentrations of the polyelectrolyte and the inorganic ions in a complex, nonlinear manner. This study examines the structural evolution and kinetics of polyaspartic acid (pAsp) directed CaP mineralization at high concentrations of polyelectrolytes, calcium, and total phosphate (19–30 mg/mL pAsp, 50–100 mM Ca2+, Ca/P = 2). Using a novel combination of characterization techniques including cryogenic transmission electron microscopy (cryo-TEM), spectrophotometry, X-ray total scattering pair distribution function analysis, and attenuated total reflectance Fourier transform infrared spectroscopy (ATR-FTIR), it was determined that the CaP mineralization occurred over four transition steps. The steps include the formation of aggregates of pAsp stabilized CaP spherical nanoparticles (sNP), crystallization of sNP, oriented attachment of the sNP into nanorods, and further crystallization of the nanorods. The intermediate aggregate sizes and the reaction kinetics were found to be highly polymer concentration dependent while the sizes of the particles were not concentration dependent. This study demonstrates the complex role of pAsp in controlling the mechanism as well as the kinetics of CaP mineralization.

  3. Handspinning Enabled Highly Concentrated Carbon Nanotubes with Controlled Orientation in Nanofibers.

    Science.gov (United States)

    Lee, Hoik; Watanabe, Kei; Kim, Myungwoong; Gopiraman, Mayakrishnan; Song, Kyung-Hun; Lee, Jung Soon; Kim, Ick Soo

    2016-11-23

    The novel method, handspinning (HS), was invented by mimicking commonly observed methods in our daily lives. The use of HS allows us to fabricate carbon nanotube-reinforced nanofibers (CNT-reinforced nanofibers) by addressing three significant challenges: (i) the difficulty of forming nanofibers at high concentrations of CNTs, (ii) aggregation of the CNTs, and (iii) control of the orientation of the CNTs. The handspun nanofibers showed better physical properties than fibers fabricated by conventional methods, such as electrospinning. Handspun nanofibers retain a larger amount of CNTs than electrospun nanofibers, and the CNTs are easily aligned uniaxially. We attributed these improvements provided by the HS process to simple mechanical stretching force, which allows for orienting the nanofillers along with the force direction without agglomeration, leading to increased contact area between the CNTs and the polymer matrix, thereby providing enhanced interactions. HS is a simple and straightforward method as it does not require an electric field, and, hence, any kinds of polymers and solvents can be applicable. Furthermore, it is feasible to retain a large amount of various nanofillers in the fibers to enhance their physical and chemical properties. Therefore, HS provides an effective pathway to create new types of reinforced nanofibers with outstanding properties.

  4. High concentrations and photochemical fate of oxygenated hydrocarbons in the global troposphere

    Science.gov (United States)

    Singh, Hanwant B.; Kanakidou, M.; Crutzen, P. J.; Jacob, D. J.

    1995-11-01

    OXYGENATED species in the atmosphere are important sources of free radicals and are intricately linked with the fate of nitrogen oxides (NO x ), which are themselves necessary for tropospheric ozone formation1,2. With the exception of formaldehyde, oxygenated hydrocarbons have rarely been measured in the free troposphere. Here we report airborne measurements indicating the presence of high concentrations (compared to those of routinely measured C2-C6 tropospheric hydrocarbons3,4) of acetone and methanol. We use a three-dimensional model to show that acetone photochemistry provides a quantitatively significant (up to 50%) pathway for sequestering NO x in the form of peroxyacetylnitrate, a relatively unreactive temporary reservoir of NO x . Furthermore, in the dry regions of the upper troposphere, acetone can provide a large primary source of HOx (OH + HO2) radicals, resulting in increased ozone production. This surprisingly significant contribution of such oxygenated hydrocarbons to tropospheric NOx, HO x and ozone cycling is likely to be affected by their changing natural and anthropogenic emissions due to land-use change, biomass burning and alcohol-based biofuel use.

  5. Biodegradation of high concentrations of benzene vapors in a two phase partition stirred tank bioreactor

    Directory of Open Access Journals (Sweden)

    Karimi Ali

    2013-01-01

    Full Text Available Abstract The present study examined the biodegradation rate of benzene vapors in a two phase stirred tank bioreactor by a bacterial consortium obtained from wastewater of an oil industry refinery house. Initially, the ability of the microbial consortium for degrading benzene was evaluated before running the bioreactor. The gaseous samples from inlet and outlet of bioreactor were directly injected into a gas chromatograph to determine benzene concentrations. Carbone oxide concentration at the inlet and outlet of bioreactor were also measured with a CO2 meter to determine the mineralization rate of benzene. Influence of the second non-aqueous phase (silicon oil has been emphasized, so at the first stage the removal efficiency (RE and elimination capacity (EC of benzene vapors were evaluated without any organic phase and in the second stage, 10% of silicon oil was added to bioreactor media as an organic phase. Addition of silicon oil increased the biodegradation performance up to an inlet loading of 5580 mg/m3, a condition at which, the elimination capacity and removal efficiency were 181 g/m3/h and 95% respectively. The elimination rate of benzene increased by 38% in the presence of 10% of silicone oil. The finding of this study demonstrated that two phase partition bioreactors (TPPBs are potentially effective tools for the treatment of gas streams contaminated with high concentrations of poorly water soluble organic contaminant, such as benzene.

  6. Entropy Generation in Flow of Highly Concentrated Non-Newtonian Emulsions in Smooth Tubes

    Directory of Open Access Journals (Sweden)

    Rajinder Pal

    2014-10-01

    Full Text Available Entropy generation in adiabatic flow of highly concentrated non-Newtonian emulsions in smooth tubes of five different diameters (7.15–26.54 mm was investigated experimentally. The emulsions were of oil-in-water type with dispersed-phase concentration (Φ ranging from 59.61–72.21% vol. The emulsions exhibited shear-thinning behavior in that the viscosity decreased with the increase in shear rate. The shear-stress (τ versus shear rate (˙γ data of emulsions could be described well by the power-law model: τ=K˙γn. The flow behavior index n was less than 1 and it decreased sharply with the increase in Φ whereas the consistency index K increased rapidly with the increase in Φ . For a given emulsion and tube diameter, the entropy generation rate per unit tube length increased linearly with the increase in the generalized Reynolds number ( Re_n on a log-log scale. For emulsions with Φ ≤65.15 % vol., the entropy generation rate decreased with the increase in tube diameter. A reverse trend in diameter-dependence was observed for the emulsion with Φ of 72.21% vol. New models are developed for the prediction of entropy generation rate in flow of power-law emulsions in smooth tubes. The experimental data shows good agreement with the proposed models.

  7. Thermal Analysis of Direct Liquid-Immersed Solar Receiver for High Concentrating Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Xinyue Han

    2015-01-01

    Full Text Available Concentrator solar cells that operate at high solar concentration level must be cooled. In this paper, direct liquid immersion cooling of triple-junction solar cells (InGaP/InGaAs/Ge is proposed as a heat dissipation solution for dense-array high concentrating photovoltaic (HCPV systems. The advantages of triple-junction CPV cells immersed in a circulating dielectric liquid and dish HCPV technology are integrated into a CPV system to improve the system electrical conversion efficiency. An analytical model for the direct liquid-immersed solar receiver with triple-junction CPV cells is presented. The main outputs of the model are the components temperatures of the receiver and the system electrical efficiency. The influence of concentration factor, mass flow rate, and inlet liquid temperature on the operating temperature of the triple-junction CPV cells and the system electrical conversion efficiency are discussed. It is shown that the system electrical conversion efficiency is very high for a wide range of operating conditions. The three operating parameters have a major effect on the operating temperature of the triple-junction CPV cells and, by extension, system output power. The flow rate selection should match concentration factor to keep the triple-junction CPV cells temperature lower and increase the electrical conversion efficiency of the dense-array HCPV system.

  8. New spray congealing atomizer for the microencapsulation of highly concentrated solid and liquid substances.

    Science.gov (United States)

    Albertini, Beatrice; Passerini, Nadia; Pattarino, Franco; Rodriguez, Lorenzo

    2008-05-01

    A new pneumatic atomizer for spray congealing, called wide pneumatic nozzle (WPN), was developed. To evaluate its performance, microparticles containing highly concentrated either solid drug (Propafenone hydrochloride, PRF) or liquid nutraceutical (Vitamin E, VE) have been prepared and characterized. The results showed that the spray congealing nozzle enabled the production of spherical and not aggregated microparticles with high yields (95% w/w) and relatively narrow size distributions; moreover, increasing the viscosity of the suspension from 50 to 500 mPa s, the particle size increased. The loading of the drug was high for microspheres (50% for PRF and 30% for VE) and the encapsulation efficiency was good for all formulations. The drug release was easily modified according to the nature of the used excipients, as both lipophilic (carnauba wax, cetearyl and stearyl alcohols) and hydrophilic (PEG 4000) carriers were employed. Moreover the results evidenced that it was possible to encapsulate actives (VE) that are in a liquid form and to enhance their availability. In conclusion the developed spray congealing nozzle was able to nebulize very viscous systems that are usually not processed by conventional apparatus and to produce microspheres with high and uniform drug content.

  9. Long term stability of Li-S batteries using high concentration lithium nitrate electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Brian DG; Carino, Emily V.; Connell, Justin G.; Han, Kee Sung; Cao, Ruiguo; Chen, Junzheng; Zheng, Jianming; Li, Qiuyan; Mueller, Karl T.; Henderson, Wesley A.; Zhang, Jiguang

    2017-10-01

    Lithium-sulfur (Li-S) battery is a very promising candidate for the next generation of energy storage systems required for electrical vehicles and grid energy storage applications due to its very high theoretical specific energy (2500 W h kg-1). However, the low coulombic efficiency (CE) during repeated Li plating/stripping of these processes have limited practical application of rechargeable Li-S batteries. In this work, a new electrolyte system based on high concentration of LiNO3 in diglyme solvent is developed which enables high CE of Li metal plating/stripping and high stability of Li anode in the sulfur containing electrolyte. Tailoring of electrolyte properties for the Li negative electrode has proven to be a successful strategy for improving the capacity retention and cycle life of Li-S batteries. This electrolyte provides a CE for Li plating/stripping of greater than 99% for over 200 cycles. In contrast, Li metal cycles for only less than 35 cycles at high CE in the standard 1 M LiTFSI + 2wt% LiNO3 in DOL:DME electrolyte under the same conditions. The stable Li metal anode enabled by the new electrolyte may accelerate the applications of high energy density Li-S batteries in both electrical vehicles and large-scale grid energy storage markets.

  10. Long term stability of Li-S batteries using high concentration lithium nitrate electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Adams, Brian D.; Carino, Emily V.; Connell, Justin G.; Han, Kee Sung; Cao, Ruiguo; Chen, Junzheng; Zheng, Jianming; Li, Qiuyan; Mueller, Karl T.; Henderson, Wesley A.; Zhang, Ji-Guang

    2017-10-01

    The lithium-sulfur (Li-S) battery is a very promising candidate for the next generation of energy storage systems required for electrical vehicles and grid energy storage applications due to its very high theoretical specific energy (2500 W h kg(-1)). However, low Coulombic efficiency (CE) during repeated Li metal plating/stripping has severely limited the practical application of rechargeable Li-S batteries. In this work, a new electrolyte system based on a high concentration of LiNO3 in diglyme (G2) solvent is developed which enables an exceptionally high CE for Li metal plating/stripping and thus high stability of the Li anode in the sulfur-containing electrolyte. The tailoring of electrolyte properties for the Li anode has proven to be a highly successful strategy for improving the capacity retention and cycle life of Li-S batteries. This electrolyte provides a CE of greater than 99% for over 200 cycles of Li plating/stripping. In contrast, the Li anode cycles for less than 35 cycles (with a high CE) in the state-of-the-art 1 M LiTFSI + 0.3 M LiNO3 in 1,3-dioxolane: 1,2-dimethoxyethane (DOL:DME) electrolyte under the same conditions. The stable Li anode enabled by the new electrolyte may accelerate the applications of high energy density Li-S batteries in both electrical vehicles and large-scale grid energy storage markets.

  11. High concentration suspended sediment measurments using acontinuous fiber optic in-stream transmissometer

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, Chris G.; Laycak, Danny T.; Hoppes, William; Tran,Nguyen T.; Shi, Frank G.

    2004-05-26

    Suspended sediment loads mobilized during high flow periods in rivers and streams are largely uncharacterized. In smaller and intermittent streams, a large storm may transport a majority of the annual sediment budget. Therefore monitoring techniques that can measure high suspended sediment concentrations at semi-continuous time intervals are needed. A Fiber optic In-stream Transmissometer (FIT) is presented for continuous measurement of high concentration suspended sediment in storm runoff. FIT performance and precision were demonstrated to be reasonably good for suspended sediment concentrations up to 10g/L. The FIT was compared to two commercially available turbidity devices and provided better precision and accuracy at both high and low concentrations. Both turbidity devices were unable to collect measurements at concentrations greater than 4 g/L. The FIT and turbidity measurements were sensitive to sediment particle size. Particle size dependence of transmittance and turbidity measurement poses the greatest problem for calibration to suspended sediment concentration. While the FIT was demonstrated to provide acceptable measurements of high suspended sediment concentrations, approaches to real-time suspended sediment detection need to address the particle size dependence in concentration measurements.

  12. Dish-based high concentration PV system with Köhler optics.

    Science.gov (United States)

    Coughenour, Blake M; Stalcup, Thomas; Wheelwright, Brian; Geary, Andrew; Hammer, Kimberly; Angel, Roger

    2014-03-10

    We present work at the Steward Observatory Solar Lab on a high concentration photovoltaic system in which sunlight focused by a single large paraboloidal mirror powers many small triple-junction cells. The optical system is of the XRX-Köhler type, comprising the primary reflector (X) and a ball lens (R) at the focus that reimages the primary reflector onto an array of small reflectors (X) that apportion the light to the cells. We present a design methodology that provides generous tolerance to mis-pointing, uniform illumination across individual cells, minimal optical loss and even distribution between cells, for efficient series connection. An operational prototype has been constructed with a 3.3m x 3.3m square primary reflector of 2m focal length powering 36 actively cooled triple-junction cells at 1200x concentration (geometric). The measured end-to-end system conversion efficiency is 28%, including the parasitic loss of the active cooling system. Efficiency ~32% is projected for the next system.

  13. Bioconversion of high concentrations of hydrogen sulfide to elemental sulfur in airlift bioreactor.

    Science.gov (United States)

    Zytoon, Mohamed Abdel-Monaem; AlZahrani, Abdulraheem Ahmad; Noweir, Madbuli Hamed; El-Marakby, Fadia Ahmed

    2014-01-01

    Several bioreactor systems are used for biological treatment of hydrogen sulfide. Among these, airlift bioreactors are promising for the bioconversion of hydrogen sulfide into elemental sulfur. The performance of airlift bioreactors is not adequately understood, particularly when directly fed with hydrogen sulfide gas. The objective of this paper is to investigate the performance of an airlift bioreactor fed with high concentrations of H2S with special emphasis on the effect of pH in combination with other factors such as H2S loading rate, oxygen availability, and sulfide accumulation. H2S inlet concentrations between 1,008 ppm and 31,215 ppm were applied and elimination capacities up to 113 g H2S m(-3) h(-1) were achieved in the airlift bioreactor under investigation at a pH range 6.5-8.5. Acidic pH values reduced the elimination capacity. Elemental sulfur recovery up to 95% was achieved under oxygen limited conditions (DO bioreactor tolerated accumulated dissolved sulfide concentrations >500 mg/L at pH values 8.0-8.5, and near 100% removal efficiency was achieved. Overall, the resident microorganisms in the studied airlift bioreactor favored pH values in the alkaline range. The bioreactor performance in terms of elimination capacity and sulfur recovery was better at pH range 8-8.5.

  14. High Concentration of Zinc in Sub-retinal Pigment Epithelial Deposits

    Energy Technology Data Exchange (ETDEWEB)

    Lengyel,I.; Flinn, J.; Peto, T.; Linkous, D.; Cano, K.; Bird, A.; Lanzirotti, A.; Frederickson, C.; van Kuijk, F.

    2007-01-01

    One of the hallmarks of age-related macular degeneration (AMD), the leading cause of blindness in the elderly in Western societies, is the accumulation of sub-retinal pigment epithelial deposits (sub-RPE deposits), including drusen and basal laminar deposits, in Bruch's membrane (BM). The nature and the underlying mechanisms of this deposit formation are not fully understood. Because we know that zinc contributes to deposit formation in neurodegenerative diseases, we tested the hypothesis that zinc might be involved in deposit formation in AMD. Using zinc specific fluorescent probes and microprobe synchrotron X-ray fluorescence we showed that sub-RPE deposits in post-mortem human tissues contain unexpectedly high concentrations of zinc, including abundant bio-available (ionic and/or loosely protein bound) ions. Zinc accumulation was especially high in the maculae of eyes with AMD. Internal deposit structures are especially enriched in bio-available zinc. Based on the evidence provided here we suggest that zinc plays a role in sub-RPE deposit formation in the aging human eye and possibly also in the development and/or progression of AMD.

  15. The Immediate Pulmonary Disease Pattern following Exposure to High Concentrations of Chlorine Gas

    Directory of Open Access Journals (Sweden)

    Pallavi P. Balte

    2013-01-01

    Full Text Available Background. Classification of pulmonary disease into obstructive, restrictive, and mixed patterns is based on 2005 ATS/ERS guidelines and modified GOLD criteria by Mannino et al. (2003, but these guidelines are of limited use for simple spirometry in situations involving mass casualties. Aim. The purpose of this study was to apply these guidelines to patients who underwent simple spirometry following high concentration of chlorine gas inhalation after a train derailment in Graniteville, South Carolina. Methods. We retrospectively investigated lung functions in ten patients. In order to classify pulmonary disease pattern, we used 2005 ATS/ERS guidelines and modified GOLD criteria along with our own criteria developed using available simple spirometry data. Results. We found predominant restrictive pattern in our patients with both modified GOLD and our criteria, which is in contrast to other chlorine exposure studies where obstructive pattern was more common. When compared to modified GOLD and our criteria, 2005 ATS/ERS guidelines underestimated the frequency of restrictive disease. Conclusion. Diagnosis of pulmonary disease patterns is of importance after irritant gas inhalation. Acceptable criteria need to be developed to evaluate pulmonary disease through simple spirometry in events leading to mass casualty and patient surge in hospitals.

  16. Struvite Crystallization of Anaerobic Digestive Fluid of Swine Manure Containing Highly Concentrated Nitrogen

    Directory of Open Access Journals (Sweden)

    Eun Young Lee

    2015-07-01

    Full Text Available In this study, the optimal operation factors for struvite crystallization for removing and recovering nitrogen and phosphorus from anaerobic digestive fluid of swine manure containing highly concentrated nitrogen was determined. Every experiment for the struvite crystallization reaction was conducted by placing 1,000 mL of digestion fluid in a 2,000 mL Erlenmeyer flask at various temperatures, pH, and mixing speed. Except for special circumstances, the digestion fluid was centrifuged (10,000 rpm, 10 min and then the supernatant was used for the experiment at room temperature and 100 rpm. The optimal mole ratio of PO43−:Mg2+ was 1:1.5, and the pH effect ranging from 9 to 11 was similar, when mixed for 1 hour. Under this condition, the removal efficiency of NH4+-N and PO43−-P was 40% and 88.6%, respectively. X-shaped crystal was observed by light and scanning electron microscopy. In addition, struvite crystal structure was confirmed through X-ray diffraction analysis.

  17. A method of batch-purifying microalgae with multiple antibiotics at extremely high concentrations

    Science.gov (United States)

    Han, Jichang; Wang, Song; Zhang, Lin; Yang, Guanpin; Zhao, Lu; Pan, Kehou

    2016-01-01

    Axenic microalgal strains are highly valued in diverse microalgal studies and applications. Antibiotics, alone or in combination, are often used to avoid bacterial contamination during microalgal isolation and culture. In our preliminary trials, we found that many microalgae ceased growing in antibiotics at extremely high concentrations but could resume growth quickly when returned to an antibiotics-free liquid medium and formed colonies when spread on a solid medium. We developed a simple and highly efficient method of obtaining axenic microalgal cultures based on this observation. First, microalgal strains of different species or strains were treated with a mixture of ampicillin, gentamycin sulfate, kanamycin, neomycin and streptomycin (each at a concentration of 600 mg/L) for 3 days; they were then transferred to antibiotics-free medium for 5 days; and finally they were spread on solid f/2 media to allow algal colonies to form. With this method, five strains of Nannochloropsis sp. (Eustigmatophyceae), two strains of Cylindrotheca sp. (Bacillariophyceae), two strains of Tetraselmis sp. (Chlorodendrophyceae) and one strain of Amphikrikos sp. (Trebouxiophyceae) were purified successfully. The method shows promise for batch-purifying microalgal cultures.

  18. Combined use of ionophore and virginiamycin for finishing Nellore steers fed high concentrate diets

    Directory of Open Access Journals (Sweden)

    Amoracyr José Costa Nuñez

    2013-08-01

    Full Text Available Zebu cattle fed high concentrate diets may present inconsistent performance due to the occurrence of metabolic disorders, like acidosis. The isolated use of ionophores and virginiamycin in high grain diets can improve animal performance and reduce the incidence of such disorders, but recent studies suggested that their combination may have an additive effect. Thus, 72 Nellore steers, 389 ± 15 kg initial body weight (BW, were confined and fed for 79 days to evaluate the combination of virginiamycin and salinomycin on performance and carcass traits. Animals were allocated to a randomized complete block design by BW, in a 2 × 2 factorial arrangement of treatments, with two concentrate levels (73 and 91 % and two virginiamycin levels (0 and 15 mg kg-1, and salinomycin (13 mg kg-1 included in all diets. The interaction was not significant (p > 0.05. Dry matter intake (DMI, average daily gain (ADG, gain-to-feed ratio (G:F, starch consumed, and fecal starch content were higher (p 0.05 between treatments. Starch consumed and estimated dietary net energy for maintenance (NEm and gain (NEg were higher (p < 0.05 for virginiamycin-treated animals, with no substantial effects on carcass traits. The inclusion of virginiamycin in finishing diets containing salinomycin reduced DMI while maintaining ADG and improving NEm and NEg, suggesting an additive effect of virginiamycin and ionophores, but without affecting carcass quality.

  19. A modified coaxial electrospinning for preparing fibers from a high concentration polymer solution

    Directory of Open Access Journals (Sweden)

    2011-08-01

    Full Text Available A new process technology modified from conventional coaxial electrospinning process has been developed to prepare polymer fibers from a high concentration solution. This process involves a pure solvent concentrically surrounding polymer fluid in the spinneret. The concentric spinneret was constructed simply by inserting a metal needle through a high elastic silica gel tube. Two syringe pumps were used to drive the core polymer solution and the sheath solvent. Using polyvinylpyrrolidone (PVP as the polymer model, which normally has an electrospinnable concentration of 10% w/v in ethanol, it was possible to electrospin 35% w/v of PVP in the same solvent, when pure N, N-dimethylacetamide (DMAc was used as sheath fluid. The resultant fibers have a smooth surface morphology and good structural uniformity. The diameter of the fibers was 2.0±0.25 µm when the DMAc-to-polymer-solution flow rate ratio was set as 0.1. The process technology reported here opens a new window to tune the polymer fibers obtained by the electrospinning, and is useful for improving productivity of the electrospinning process.

  20. Production of Mannitol from a High Concentration of Glucose by Candida parapsilosis SK26.001.

    Science.gov (United States)

    Meng, Qing; Zhang, Tao; Wei, Wenting; Mu, Wanmeng; Miao, Ming

    2017-01-01

    A novel strain, SK26.001, which can produce mannitol from a high concentration of glucose without the addition of fructose, was isolated from sugarcane juice. This strain was identified as Candida parapsilosis based on 18S ribosomal RNA (rRNA) sequence analysis and the morphological and physiological-biochemical characteristics of the strain. Under optimized fermentation conditions, the mannitol concentration in shake flasks reached 68.5 g/L. When batch fermentation was performed, the fed glucose was completely consumed after 72 h, resulting in a final mannitol concentration of 80.3 g/L. Fed-batch fermentation was then performed with glucose feed. During the fed-batch process, ammonia water was added to maintain the pH at 4.0. The mannitol concentration in the fermenter reached 97.1 g/L after 120 h, with a total glucose consumption of 284 g/L.

  1. Implantation of high concentration noble gases in cubic zirconia and silicon carbide: A contrasted radiation tolerance

    Energy Technology Data Exchange (ETDEWEB)

    Velişa, Gihan, E-mail: gihan@tandem.nipne.ro [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania); Debelle, Aurélien; Thomé, Lionel; Mylonas, Stamatis [Centre de Sciences Nucléaires et de Sciences de la Matière, CNRS-IN2P3-Université Paris-Sud, Bât. 108, F-91405 Orsay (France); Vincent, Laetitia [Centre de Sciences Nucléaires et de Sciences de la Matière, CNRS-IN2P3-Université Paris-Sud, Bât. 108, F-91405 Orsay (France); Institut d’Electronique Fondamentale, Université Paris-Sud, UMR 8622, Bât. 220, 91405 Orsay (France); Boulle, Alexandre [Science des Procédés Céramiques et de Traitements de Surface, CNRS UMR 7315, Centre Européen de la Céramique, 12 rue Atlantis, 87068 Limoges (France); Jagielski, Jacek [Institute for Electronic Materials Technology, Wolczynska 133, 01-919 Warsaw (Poland); National Center for Nuclear Research, PL-05-400 Swierk/Otwock (Poland); Pantelica, Dan [Horia Hulubei National Institute for Physics and Nuclear Engineering, P.O.B. MG-6, 077125 Magurele (Romania)

    2014-08-01

    The modifications of the microstructure of yttria-stabilized cubic zirconia and silicon carbide single crystals implanted with high concentrations of noble gas ions and subsequently annealed at high temperature were characterized using RBS/C, XRD and TEM. It is found that the annealing behavior is strongly dependent on both the material and the implanted noble gases. Ar-implanted yttria-stabilized zirconia shows no significant microstructural modification upon annealing at 800 °C, e.g. dislocations are still present and the size of the Ar bubbles does not evolve. This is in strong contrast with previous observations on helium-implanted zirconia, where the formation of bubbles and elongated fractures were observed. In the case of SiC, thermal annealing at 1000 °C shows an enhanced damage recovery when He is implanted as compared to Ar implantation and the recrystallization of the matrix is accompanied with the release of noble gas atoms. This difference can be ascribed to different atomic radii, and thus mobility of implanted species.

  2. Metal dynamics and tolerance of Typha domingensis exposed to high concentrations of Cr, Ni and Zn.

    Science.gov (United States)

    Mufarrege, M M; Hadad, H R; Di Luca, G A; Maine, M A

    2014-07-01

    Typha domingensis was exposed to a 100mgL(-1) Cr+100mgL(-1) Ni+100mgL(-1) Zn solution. Metal tolerance and metal accumulation in plant tissues and sediment were studied over time. Although removal rates were different, the three metals were efficiently removed from water. Leaf and root tissues showed high metal concentration. However, the sediment showed the highest accumulation. During the first hours of contact, metals were not only accumulated by sediment and roots but they were also taken up by the leaves in direct contact with the solution. Over time, metals were translocated from roots to leaves and vice versa. Metals caused growth inhibition and a decrease in chlorophyll concentration and affected anatomical parameters. Despite these sub-lethal effects, T. domingensis demonstrated that it could accumulate Cr, Ni and Zn efficiently and survive an accidental dump of high concentrations of contaminants in systems such as natural and constructed wetlands. Copyright © 2014 Elsevier Inc. All rights reserved.

  3. The ability of Typha domingensis to accumulate and tolerate high concentrations of Cr, Ni, and Zn.

    Science.gov (United States)

    Mufarrege, M M; Hadad, H R; Di Luca, G A; Maine, M A

    2015-01-01

    The tolerance and removal efficiency of Typha domingensis exposed to high concentrations of Cr, Ni, and Zn in single and combined treatments were studied. Sediment and two plants were disposed in each plastic reactor. The treatments were 100 and 500 mg L(-1) of Cr, Ni, and Zn (single solutions); 100 mg L(-1) Cr + Ni + Zn (multi-metal solutions) and 500 mg L(-1) Cr + Ni + Zn (multi-metal solutions); and a control. Even though the concentrations studied were extremely high, simulating an accidental metal dump, the three metals were efficiently removed from water. The highest removal was registered for Cr. The presence of other metals favored Cr and did not favor Ni and Zn removal from water. After 25 days, senescence and chlorosis of plants were observed in Ni and Comb500 treatments, while Cr and Zn only caused growth inhibition. T. domingensis accumulated high metal concentrations in tissues. The roots showed higher metal concentration than submerged parts of leaves. Cr translocation to aerial parts was enhanced by the presence of Ni and Zn. Our results demonstrate that in the case of an accidental dump of high Cr, Ni, and Zn concentrations, a wetland system dominated by T. domingensis is able to retain metals, and the macrophyte is able to tolerate them the time necessary to remove them from water. Thus, the environment will be preserved since the wetland would act as a cushion.

  4. Biodegradation of High Concentrations of Benzene Vapors in a Two Phase Partition Stirred Tank Bioreactor

    Directory of Open Access Journals (Sweden)

    Ali Karimi

    2013-01-01

    Full Text Available The present study examined the biodegradation rate of benzene vapors in a two phase stirred tank bioreactor by a bacterial consortium obtained from wastewater of an oil industry refinery house. Initially, the ability of the microbial consortium for degrading benzene was evaluated before running the bioreactor. The gaseous samples from inlet and outlet of bioreactor were directly injected into a gas chromatograph to determine benzene concentrations. Carbone oxide concentration at the inlet and outlet of bioreactor were also measured with a CO2 meter to determine the mineralization rate of benzene. Influence of the second non-aqueous phase (silicon oil has been emphasized, so at the first stage the removal efficiency (RE and elimination capacity (EC of benzene vapors were evaluated without any organic phase and in the second stage, 10% of silicon oil was added to bioreactor media as an organic phase. Addition of silicon oil increased the biodegradation performance up to an inlet loading of 5580?mg/m3, a condition at which, the elimination capacity and removal efficiency were 181?g/m3/h and 95% respectively. The elimination rate of benzene increased by 38% in the presence of 10% of silicone oil. The finding of this study demonstrated that two phase partition bioreactors (TPPBs are potentially effective tools for the treatment of gas streams contaminated with high concentrations of poorly water soluble organic contaminant, such as benzene.

  5. Performance and Degradation of A Lithium-Bromine Rechargeable Fuel Cell Using Highly Concentrated Catholytes

    CERN Document Server

    Bai, Peng

    2016-01-01

    Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, and higher efficiency. The cell is similar in structure to a hybrid-electrolyte Li-air battery, where a lithium metal anode in nonaqueous electrolyte is separated from aqueous bromine catholytes by a lithium-ion conducting ceramic plate. The cell with a flat graphite electrode can discharge at a peak power density around 9mW cm-2 and in principle could provide a specific energy of 791.8 Wh kg-1, superior to most existing cathode materials and catholytes. It can also run in regenerative mode to recover the lithium metal anode and free bromine with 80-90% voltage efficiency, without any catalysts. Degradation of the sol...

  6. Graphene oxide as efficient high-concentration formaldehyde scavenger and reutilization in supercapacitor.

    Science.gov (United States)

    Liang, Hongyu; Bu, Yongfeng; Zhang, Yutian; Zhang, Junyan

    2015-04-15

    Graphene oxide (GO) was investigated as a low-cost and high-efficient scavenger for high-concentration formaldehyde in alkali media. It showed very high removal capacity, 411 mg of formaldehyde per milligram of GO, and strong resistant to temperature changes. Additionally, the used GO can be easily renewed by a simple electrochemical method. By analyzing the componential and electrochemical characterizations of GO before and after use, the results showed that the degradation mechanism of formaldehyde is a collaborative process of chemical oxidation and physical adsorption, and the former dominates the degradation process. With the aid of oxygen-containing groups in GO, most formaldehyde can be easily oxidized by GO in alkaline media (this is equivalent to GO was reduced by formaldehyde). On the other hand, the used GO (reduced GO, noted as rGO) exhibits more ideal electronic double-layer capacitor (EDLC) feature than GO, along with higher rate capacitance (up to 136 F g(-1) at 50 A g(-1)). In short, GO is not only an efficient formaldehyde scavenger, but the used GO (rGO) can serve as promising electrical energy storage material. This study provides new insights for us to reutilize the discarded adsorbents generated from the environmental protection. Copyright © 2014 Elsevier Inc. All rights reserved.

  7. Strategies to decolorize high concentrations of methyl orange using growing cells of Lactobacillus casei TISTR 1500.

    Science.gov (United States)

    Tantiwa, Nidtaya; Seesuriyachan, Phisit; Kuntiya, Ampin

    2013-01-01

    Batch, fed-batch, and continuous fermentation was used in the processing of methyl orange decolorization using growing cells of Lactobacillus casei TISTR 1500. This report presents the optimal conditions for methyl orange decolorization by the strain TISTR 1500 in modified MRS via a central composite design (CCD) experiment. In particular, the highest decolorization efficiencies were obtained with 13.41 g/L of meat extract, and with 10.89 g/L of yeast extract at pH 6.88 at 35 °C. Under the optimal conditions, the rate of decolorization increased to 322% of that obtained for un-optimized MRS medium. The high concentration of methyl orange (5 g/L) was completely degraded within 9 h in batch fermentation. The total methyl orange load with 8.075 g/L was also decolorized in fed-batch fermentation within 13 h, and the biomass of the strain dramatically decreased after an incubation time of 8 h due to a shortage of sucrose. In the continuous system with a dye-loading rate of 600 mg/L/h and a total of loaded azo dye of 7.2 g/L, high efficiency of methyl orange removal was significantly high, at 98%.

  8. Optimization of multiroute synthesis for polyaniline-barium ferrite composites

    Energy Technology Data Exchange (ETDEWEB)

    Ben Ghzaiel, Tayssir, E-mail: tayssir.ben-ghzaiel@satie.ens-cachan.fr [Université de Tunis El Manar Faculté des Sciences de Tunis, UR11ES18 Unité de Recherche de Chimie Minérale Appliquée, 2092, Tunis (Tunisia); SATIE, ENS Cachan, CNRS, Université Paris-Saclay, 61 av du Président Wilson, F-94230, Cachan (France); Dhaoui, Wadia [Université de Tunis El Manar Faculté des Sciences de Tunis, UR11ES18 Unité de Recherche de Chimie Minérale Appliquée, 2092, Tunis (Tunisia); Pasko, Alexander; Mazaleyrat, Frédéric [SATIE, ENS Cachan, CNRS, Université Paris-Saclay, 61 av du Président Wilson, F-94230, Cachan (France)

    2016-08-15

    A comparative study of physicochemical and magnetic properties of Polyaniline-BaFe{sub 12}O{sub 19} composites prepared by Solid-Based Polymerization (SBP) and by Aqueous-Based Polymerization (ABP) is carried out. The composites obtained by the latter method underwent a grinding to study the influence of shear stress. Thus, in a systematic approach, an investigation of stirring effect was done by synthesizing these composites using aqueous-based polymerization but without mechanical stirring. Different mass ratio of BaFe{sub 12}O{sub 19} was used to explore their impact on composites properties. X-ray diffraction, FTIR, SEM, TGA, conductivity and vibrating sample magnetometer measurements were performed. Structural and morphological investigations confirmed the presence of polyaniline and barium hexaferrite phase, which were in interaction in the composites regardless the polymerization route. The powder obtained by solid-based pathway revealed distinct particles with uniform distribution for various compositions (wt. %) of BaFe{sub 12}O{sub 19} in Pani, while the composites obtained by aqueous-based polymerization presented agglomerated nanostructures. Thermogravimetric analysis exhibited an improved thermal stability for Pani-BaFe{sub 12}O{sub 19} obtained by solid-based route. The electric conductivity has displayed decreasing trend of DC conductivity with the increase of BaFe{sub 12}O{sub 19} particles in the polymer matrix. Magnetic studies showed a ferromagnetic behaviour for all composites. The saturation magnetization monotonously increased with the increasing of BaFe{sub 12}O{sub 19} amount. The magnetic properties of the powders were mainly related to the hexaferrite loading which was determined using measured magnetic data. These results revealed that magnetization saturation was dependant of volume fraction of ferrite in the composites which was significantly affected by the reaction medium and mechanical stirring. The powders obtained by solid

  9. Heparan sulphate epitope-expression is associated with the inflammatory response in metastatic malignant melanoma.

    NARCIS (Netherlands)

    Bernsen, M.R.; Smetsers, T.F.; Westerlo, E.M.A. van de; Ruiter, D.J.; Hakansson, L.; Gustafsson, B.; Kuppevelt, A.H.M.S.M. van; Krysander, L.; Rettrup, B.; Hakansson, A.

    2003-01-01

    Heparan sulphate (HS) represents a heterogeneous class of molecules on cell membranes and extracellular matrices. These molecules are involved in a variety of biological processes, including immune responses, through their binding and functional modulation of proteins. Recently a panel of

  10. The use of micro-algal biomass as a carbon source for biological sulphate reducing systems.

    Science.gov (United States)

    Boshoff, G; Duncan, J; Rose, P D

    2004-06-01

    An upflow anaerobic digestor was fed dried algal biomass as a carbon source to establish the feasibility of using micro-algal biomass as the sole carbon source for biological sulphate reduction. The effect of the COD:SO4 ratio on substrate consumption and sulphate removal efficiencies were assessed by varying the organic carbon content of the media. Similar COD removal efficiencies were obtained irrespective of the influent COD:SO4 ratios, which were 8.1, 11.2 and 15.0. However, the rates of COD removal did differ with influent COD:SO4 ratios. The percentage sulphate removed decreased as the ratio of COD:SO4 increased. Not all of the COD was used for sulphate reduction, with only 31% being accounted for.

  11. Bio-corrosion of water pipeline by sulphate-reducing bacteria in a ...

    African Journals Online (AJOL)

    esiri

    2013-11-13

    Nov 13, 2013 ... This study investigates the presence of SRB in water, in a water pipeline and in ... Key words: Sulphate-reducing bacteria, corrosion, water pipeline, biocide. INTRODUCTION ...... tubercles in distribution pipelines. J. Am. Water ...

  12. Deterioration of hardened cement paste under combined sulphate-chloride attack investigated by synchrotron XRD

    Science.gov (United States)

    Stroh, J.; Meng, B.; Emmerling, F.

    2016-06-01

    The exact mechanisms of the phase transitions caused by a combined sulphate-chloride attack are discussed controversially. The main points concern the mutual influences of sulphate and chloride ions during the secondary binding processes of these anions within cement hydrate phases. We simulated combined sulphate-chloride attack under laboratory conditions using solutions containing NaCl and Na2SO4 in different concentrations. Three sample compositions were used for the preparation of the specimens. In two of them, 30% of Portland cement was replaced by supplementary cementitious materials (fly ash, slag). The phase distribution in the samples was determined using synchrotron X-ray diffraction. The analysis with high spatial resolution allows the localisation of the secondary phase formation in the microstructural profile of the sample. A mechanism of the phase developments under combined sulphate-chloride attack is derived.

  13. Studies on calcium, magnesium and sulphate in the Mandovi and Zuari river system (Goa)

    Digital Repository Service at National Institute of Oceanography (India)

    SenGupta, R.; Naik, S.

    Distribution of calcium, magnesium and sulphate have been examined in the tide-dominated Mandovi and Zuari river systems. Calcium and magnesium appear to take some part in the bio-geochemical cycles of the rivers and behave as semi...

  14. Chondroitin sulphate-guided construction of polypyrrole nanoarchitectures

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, Zhengnan [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Zhu, Wenjun [Department of Prosthodontics, Guanghua School of Stomatology, Sun Yat-sen University, Guangzhou 510055 (China); Liao, Jingwen [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Huang, Shishu [State Key Laboratory of Oral Diseases, West China College of Stomatology, Sichuan University (China); Department of Orthopaedics and Traumatology, The University of Hong Kong (China); Chen, Junqi; He, Tianrui [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China); Tan, Guoxin, E-mail: tanguoxin@126.com [Faculty of Light and Chemical, Guangdong University of Technology, Guangzhou 510006 (China); Ning, Chengyun, E-mail: imcyning@scut.edu.cn [School of Materials Science and Engineering, South China University of Technology, Guangzhou 510641 (China)

    2015-03-01

    Nanospheres, nanocones, and nanowires are three typical polypyrrole (PPy) nanoarchitectures and electrochemically polymerized with the dope of chondroitin sulphate (CS) in this study. CS, a functional biomacromolecule, guides the formation of PPy nanoarchitectures as the dopant and morphology-directing agent. Combined with our previous reported other PPy nanoarchitectures (such as nanotube arrays and nanowires), this work further proposed the novel mechanism of the construction of PPy/CS nanoarchitectures with the synergistic effect of CS molecular chains structure and the steric hindrance. Compared to the undoped PPy, MC3T3-E1 cells with PPy/CS nanoarchitectures possessed stronger proliferation and osteogenic differentiation capability. This suggests that PPy/CS nanoarchitectures have appropriate biocompatibility. Altogether, the nanoarchitectured PPy/CS may find application in the regeneration of bone defect. - Highlights: • The formation mechanism of PPy nanoarchitectures was proposed. • CS acted as biofunctional dopant and morphology-directing agent in PPy forming. • PPy-CS nanoarchitectures were dependent on the Py/CS ratio.

  15. Detection of sulphate-reducing bacteria in human saliva.

    Science.gov (United States)

    Heggendorn, Fabiano Luiz; Gonçalves, Lucio Souza; Dias, Eliane Pedra; Silva Junior, Arley; Galvão, Mariana Machado; Lutterbach, Márcia T S

    2013-11-01

    The aim of the current study was to investigate the presence of sulphate-reducing bacteria (SRB) in human saliva and correlate with oral and systemic conditions. Saliva samples were collected from 118 patients and inoculated in 2 ml of modified Postgate's E medium culture. After 28 days of incubation at 30°C the presence of SRB was identified by the production of sulphide. Of 118 saliva samples collected, 35 were positive for the presence of SRB. Three positive samples were randomly chosen to identify the species of SRB by PCR and sequenced. The three selected samples were identified as Desulfovibrio fairfieldensis, Desulfovibrio desulfuricans and Raoultella ornithinolytica. Gastritis (14.4%) was the most prevalent systemic disease, followed by diabetes (3.4%), while periodontitis (11%) and traumatic fibroma (4.2%) were the oral manifestations most frequently found. A bivariate analysis was performed to examine for the presence of SRB and the most prevalent systemic and oral manifestations. Only periodontitis showed a statistically significant association (p = 0.0003). The results showed SRB can be found in oral microbiota of healthy patients. Regarding the several conditions studied, there was a higher prevalence of SRB in patients with gastritis and patients with periodontal disease, with a possible correlation between the presence of SRB in the oral microbiota and periodontal disease.

  16. Determination of Oversulphated Chondroitin Sulphate and Dermatan Sulphate in unfractionated heparin by (1)H-NMR - Collaborative study for quantification and analytical determination of LoD.

    Science.gov (United States)

    McEwen, I; Mulloy, B; Hellwig, E; Kozerski, L; Beyer, T; Holzgrabe, U; Wanko, R; Spieser, J-M; Rodomonte, A

    2008-12-01

    Oversulphated Chondroitin Sulphate (OSCS) and Dermatan Sulphate (DS) in unfractionated heparins can be identified by nuclear magnetic resonance spectrometry (NMR). The limit of detection (LoD) of OSCS is 0.1% relative to the heparin content. This LoD is obtained at a signal-to-noise ratio (S/N) of 2000:1 of the heparin methyl signal. Quantification is best obtained by comparing peak heights of the OSCS and heparin methyl signals. Reproducibility of less than 10% relative standard deviation (RSD) has been obtained. The accuracy of quantification was good.

  17. Biological sulphate removal from acid mine effluent using ethanol as carbon and energy source

    CSIR Research Space (South Africa)

    Greben, HA

    2000-01-01

    Full Text Available was 2.5 and 8.4g SO4/(2.d) at HRT of 18 to 4.3 h. The experimental COD/sulphate ratio was between 0.55 and 0.84, which is in accordance with the theoretical value of 0.87. The experimental sulphide/sulphate ratio was less than the theoretical value of 0...

  18. The bioavailability of four zinc oxide sources and zinc sulphate in broiler chickens

    OpenAIRE

    Veldkamp, T.; Diepen, van, C.A.; Bikker, P.

    2014-01-01

    Zinc is an essential trace element for all farm animal species. It is commonly included in animal diets as zinc oxide, zinc sulphate or organically bound zinc. Umicore Zinc Chemicals developed zinc oxide products with different mean particle sizes. Umicore Zinc Chemicals requested Wageningen UR Livestock Research to determine the bioavailability of four zinc oxide sources and zinc sulphate in broiler chickens. A precise estimate of the bioavailability of zinc sources is required both for fulf...

  19. Magnesium sulphate at 30 to 34?weeks? gestational age: neuroprotection trial (MAGENTA) - study protocol

    OpenAIRE

    Crowther, Caroline A; Middleton, Philippa F; Wilkinson, Dominic; Ashwood, Pat; Haslam, Ross

    2013-01-01

    Background Magnesium sulphate is currently recommended for neuroprotection of preterm infants for women at risk of preterm birth at less than 30?weeks? gestation, based on high quality evidence of benefit. However there remains uncertainty as to whether these benefits apply at higher gestational ages. The aim of this randomised controlled trial is to assess whether giving magnesium sulphate compared with placebo to women immediately prior to preterm birth between 30 and 34?weeks? gestation re...

  20. Changes of Soil Chemical Properties during Rice Straw Decomposition in Different Types of Acid Sulphate Soils

    OpenAIRE

    Anna Hairani; Ani Susilawati

    2013-01-01

    Organic residues often exhibit different physico-chemical properties and affect the soil ecosystem in different ways. Hence, the study of their impact on soil is essential to benefit from their potential as amendments and to avoid adverse environmental effects. It is required to study the role of rice straw in the changes of soil properties during decomposition processes in the rice field. The research was conducted on potential acid sulphate soil (PASS) and actual acid sulphate soil (AASS) i...

  1. Influence of the COD to sulphate ratio on the anaerobic organic ...

    African Journals Online (AJOL)

    First-order apparent kinetic parameters (K1 a pp ) decreased from 1.96 x 10-4 to 1.55 x 10-4l·mg VSS-1·h-1 as the COD to sulphate ratio decreased from 22.6 to 0.8. The progressive but moderate inhibition of the organic matter conversion observed indicates that high sulphate concentrations can be accommodated in HAIB ...

  2. Tri-Lateral Noor al Salaam High Concentration Solar Central Receiver Program

    Energy Technology Data Exchange (ETDEWEB)

    Blackmon, James B

    2008-03-31

    This report documents the efforts conducted primarily under the Noor al Salaam (“Light of Peace”) program under DOE GRANT NUMBER DE-FC36-02GO12030, together with relevant technical results from a closely related technology development effort, the U.S./Israel Science and Technology Foundation (USISTF) High Concentration Solar Central Receiver program. These efforts involved preliminary design, development, and test of selected prototype power production subsystems and documentation of an initial version of the system definition for a high concentration solar hybrid/gas electrical power plant to be built in Zaafarana, Egypt as a first step in planned commercialization. A major part of the planned work was halted in 2007 with an amendment in October 2007 requiring that we complete the technical effort by December 31, 2007 and provide a final report to DOE within the following 90 days. This document summarizes the work conducted. The USISTF program was a 50/50 cost-shared program supported by the Department of Commerce through the U.S./Israel Science and Technology Commission (USISTC). The USISTC was cooperatively developed by President Clinton and the late Prime Minister Rabin of Israel "to encourage technological collaboration" and "support peace in the Middle East through economic development". The program was conducted as a follow-on effort to Israel's Magnet/CONSOLAR Program, which was an advanced development effort to design, fabricate, and test a solar central receiver and secondary optics for a "beam down" central receiver concept. The status of these hardware development programs is reviewed, since they form the basis for the Noor al Salaam program. Descriptions are provided of the integrated system and the major subsystems, including the heliostat, the high temperature air receiver, the power conversion unit, tower and tower reflector, compound parabolic concentrator, and the master control system. One objective of the USISTF program was to conduct

  3. Sulphated glycosaminoglycans and proteoglycans in the developing vertebral column of juvenile Atlantic salmon (Salmo salar).

    Science.gov (United States)

    Hannesson, Kirsten O; Ytteborg, Elisabeth; Takle, Harald; Enersen, Grethe; Bæverfjord, Grete; Pedersen, Mona E

    2015-08-01

    In the present study, the distribution of sulphated glycosaminoglycans (GAGs) in the developing vertebral column of Atlantic salmon (Salmo salar) at 700, 900, 1100 and 1400 d° was examined by light microscopy. The mineralization pattern was outlined by Alizarin red S and soft structures by Alcian blue. The temporal and spatial distribution patterns of different types of GAGs: chondroitin-4-sulphate/dermatan sulphate, chondroitin-6-sulphate, chondroitin-0-sulphate and keratan sulphate were addressed by immunohistochemistry using monoclonal antibodies against the different GAGs. The specific pattern obtained with the different antibodies suggests a unique role of the different GAG types in pattern formation and mineralization. In addition, the distribution of the different GAG types in normal and malformed vertebral columns from 15 g salmon was compared. A changed expression pattern of GAGs was found in the malformed vertebrae, indicating the involvement of these molecules during the pathogenesis. The molecular size of proteoglycans (PGs) in the vertebrae carrying GAGs was analysed with western blotting, and mRNA transcription of the PGs aggrecan, decorin, biglycan, fibromodulin and lumican by real-time qPCR. Our study reveals the importance of GAGs in development of vertebral column also in Atlantic salmon and indicates that a more comprehensive approach is necessary to completely understand the processes involved.

  4. Differential inhibition of polymorphonuclear leukocyte recruitment in vivo by dextran sulphate and fucoidan

    Directory of Open Access Journals (Sweden)

    N. Van Osselaer

    1996-01-01

    Full Text Available The selectin-mediated rolling of leukocytes along the endothelial cells is a prerequisite step followed by firm adhesion and extravasation into the inflamed tissue. This initial contact can be suppressed by sulphated polysaccharides. We have studied the effect of sulphated polysaccharides on the ultimate polymorphonuclear leukocyte (PMN recruitment and plasma leakage in rabbit skin in response to intradermal injection of various inflammatory mediators. PMN infiltration evoked by various PMN chemoattractants (FMLP, C5a desArg, LTB4 and IL-8 was significantly inhibited after intravenous injection of dextran sulphate (25 mg/kg, heparin (2 × 90 mg/kg or fucoidan (1 mg/kg. PMN-dependent plasma leakage was equally well reduced by the different sulphated polymers. Vascular permeability induced by histamine or thrombin acting via a PMN-independent mechanism was not reduced. Fucoidan was the only polysaccharide able to suppress IL-1-induced PMN infiltration for 60–70%. Local administration of dextran sulphate had no effect on PMN-dependent plasma leakage. Differential inhibition of PMN recruitment was determined after injection of dextran sulphate or fucoidan depending on the type of insult. Therefore, these results suggest that different adhesion pathways are utilized during PMN recruitment in vivo in response to chemoattractants and IL-1.

  5. The effect of sulphates on partitioning of pectinases in aqueous two-phase systems

    Directory of Open Access Journals (Sweden)

    Antov Mirjana G.

    2004-01-01

    Full Text Available The effect of various sulphate salts on the partitioning of endo-pectinase and exo-pectinase in aqueous two-phase systems, composed of polyethylene glycol and dextran, was studied. Presence of ammonium sulphate and sodium sulphate at concentration 15 mmol/l in the system polyethylene glycol 4000/crude dextran, at tie-line length 7.44%, increased partition coefficient of endo-pectinase 1.25 and 1.2 fold, respectively. Ammonium sulphate at 15 mmol/l and sodium sulphate at 5 mmol/l enhanced partition coefficient for exo-pectinase for about 60% in comparison to the system without salts. Addition of magnesium and sodium sulphate to a final concentration of 0.3 mmol/l in the system containing polyethylene glycol 6000/dextran 500 000, at tie-line length 6.26%, increased the partition coefficient of endo activity for 95% and 32%, respectively. Both salts at the same concentration increased partition coefficient of exo activity 1.5 and 3 times, respectively, in comparison to the system without salts.

  6. Lipid peroxidation in rats treated with vincristine sulphate and nandrolone decanoate

    Directory of Open Access Journals (Sweden)

    D.B Martins

    2011-02-01

    Full Text Available Brain and serum lipid peroxidation was studied in rats treated with vincristine sulphate and different doses of nandrolone decanoate. Thirty rats were distributed into six groups (n=5. The treatments were applied once a week for two weeks. Sample collection was performed in the third week. Treatments during the first week were: G1 (control - physiologic solution, G2 - vincristine sulphate (4mg/m², G3 - physiologic solution, G4 - physiologic solution, G5- vincristine sulphate (4mg/m², and G6 - vincristine sulphate (4mg/m². In the second week, they were: G1 (control - physiologic solution, G2- physiologic solution, G3 - nandrolone decanoate (1.8mg/kg-1, G4 - nandrolone decanoate (10mg/kg-1, G5 - nandrolone decanoate (1.8mg/kg-1, and G6 - nandrolone decanoate (10mg/kg-1. Lipid peroxidation increased with the isolated use of vincristine and nandrolone decanoate, and with vincristine associated to the highest dose of the ester as well. These results suggest that vincristine sulphate and nandrolone decanoate increase free radical production. Therapeutic dose of nandrolone decanoate when associated with vincristine sulphate proved to be beneficial, as it was able to protect the organism from damaging processes involved in free radical production

  7. Nanofunctionalized zirconia and barium sulfate particles as bone cement additives.

    Science.gov (United States)

    Gillani, Riaz; Ercan, Batur; Qiao, Alex; Webster, Thomas J

    2010-02-02

    Zirconia (ZrO(2)) and barium sulfate (BaSO(4)) particles were introduced into a methyl methacrylate monomer (MMA) solution with polymethyl methacrylate (PMMA) beads during polymerization to develop the following novel bone cements: bone cements with unfunctionalized ZrO(2) micron particles, bone cements with unfunctionalized ZrO(2) nanoparticles, bone cements with ZrO(2) nanoparticles functionalized with 3-(trimethoxysilyl)propyl methacrylate (TMS), bone cements with unfunctionalized BaSO(4) micron particles, bone cements with unfunctionalized BaSO(4) nanoparticles, and bone cements with BaSO(4) nanoparticles functionalized with TMS. Results demonstrated that in vitro osteoblast (bone-forming cell) densities were greater on bone cements containing BaSO(4) ceramic particles after four hours compared to control unmodified bone cements. Osteoblast densities were also greater on bone cements containing all of the ceramic particles after 24 hours compared to unmodified bone cements, particularly those bone cements containing nanofunctionalized ceramic particles. Bone cements containing ceramic particles demonstrated significantly altered mechanical properties; specifically, under tensile loading, plain bone cements and bone cements containing unfunctionalized ceramic particles exhibited brittle failure modes whereas bone cements containing nanofunctionalized ceramic particles exhibited plastic failure modes. Finally, all bone cements containing ceramic particles possessed greater radio-opacity than unmodified bone cements. In summary, the results of this study demonstrated a positive impact on the properties of traditional bone cements for orthopedic applications with the addition of unfunctionalized and TMS functionalized ceramic nanoparticles.

  8. Barium oxide, calcium oxide, magnesia, and alkali oxide free glass

    Science.gov (United States)

    Lu, Peizhen Kathy; Mahapatra, Manoj Kumar

    2013-09-24

    A glass composition consisting essentially of about 10-45 mole percent of SrO; about 35-75 mole percent SiO.sub.2; one or more compounds from the group of compounds consisting of La.sub.2O.sub.3, Al.sub.2O.sub.3, B.sub.2O.sub.3, and Ni; the La.sub.2O.sub.3 less than about 20 mole percent; the Al.sub.2O.sub.3 less than about 25 mole percent; the B.sub.2O.sub.3 less than about 15 mole percent; and the Ni less than about 5 mole percent. Preferably, the glass is substantially free of barium oxide, calcium oxide, magnesia, and alkali oxide. Preferably, the glass is used as a seal in a solid oxide fuel/electrolyzer cell (SOFC) stack. The SOFC stack comprises a plurality of SOFCs connected by one or more interconnect and manifold materials and sealed by the glass. Preferably, each SOFC comprises an anode, a cathode, and a solid electrolyte.

  9. Solid solutions based on lead-barium metaniobate

    Energy Technology Data Exchange (ETDEWEB)

    Gridnev, S.A.; Barmina, N.V.; Pavlova, N.G.; Parfenova, N.N.; Smirnova, E.P. (Voronezhskij Politekhnicheskij Inst. (USSR); AN SSSR, Moscow. Fiziko-Tekhnicheskij Inst.)

    1982-10-01

    Piezoceramic materials based on solid solutions of (1-x-y-z), PbNb/sub 2/O/sub 6/+xBaNb/sub 2/O/sub 6/+yPb/sub 2/Ti/sub 2/O/sub 6/+zNa/sub 2/Nb/sub 2/O/sub 6/ composition with high Curie temperatures (470-600 deg) are prepared. Polarization conditions are determined and materials with high values of piezomodules d/sub 33/=(40-50)x10/sup -12/ K/N and d/sub 31/=5.3x10/sup -12/ K/N are prepared. High temperature stability (up to 300 deg C) of piezoelectric properties and elastic ductibility is characteristic of the investigated system. Introduction of barium, sodium metaniobates and lead titanate in lead metaniobate ceramics permits to prepare piezomaterials both with high (Qsub(m)=300-350) and with low (Qsub(m)=20) mechanical quality factor.

  10. The thermophysical properties of calcium and barium zirconium phosphate

    Science.gov (United States)

    Gregg, Daniel J.; Karatchevtseva, Inna; Triani, Gerry; Lumpkin, Gregory R.; Vance, Eric R.

    2013-10-01

    The thermophysical and structural properties of calcium and barium zirconium phosphate ceramics (CZP and BZP) have been investigated for their potential candidacy as actinide hosts for inert matrix fuels (IMF) in nuclear reactors. These phosphate ceramics, which can accommodate minor actinides as well as the resulting fission products, are found to be thermally stable to 1600 °C in air, however they begin to decompose in an inert atmosphere above approximately 1400 °C. The heat capacity, thermal conductivity and bulk thermal-expansion were measured from room temperature up to 1200 °C. Structural changes in this temperature region as well as the anisotropic thermal-expansion behaviour were studied using high-temperature X-ray diffraction. A phase change from R-3 to R-3c was identified for Ba0.5Zr2(PO4)3 near 880 °C. The thermal conductivity for these ceramics at 1000 °C was found to be 1.0 W m-1 K-1, a relatively low thermal conductivity that was increased to 5.0 W m-1 K-1 at 1000 °C for BZP:Ni (25:75 mass ratio) cermet composites.

  11. Impedance spectroscopy of perovskite barium substituted lead zinc niobate ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Himanshu, A.K., E-mail: himanshu_ak@yahoo.co.i [Advanced Materials Laboratory, Variable Energy Cyclotron Centre, 1/AF Bidhannagar, Kolkata 700 064 (India); Choudhary, B.K. [University Department of Physics, Ranchi University, Jharkhand 834 001 (India); Gupta, D.C. [School of Studies in Physics, Jiwaji University, Gwalior, Madhya Pradesh 474 011 (India); Bandyopadhayay, S.K. [Advanced Materials Laboratory, Variable Energy Cyclotron Centre, 1/AF Bidhannagar, Kolkata 700 064 (India); Sinha, T.P. [Department of Physics, Bose Institute, 93/1 Acharya Prafulla Chandra Road, Kolkata 700 009 (India)

    2010-03-15

    The complex perovskite lead barium zinc niobate, (Pb{sub 1-x}Ba{sub x})(Zn{sub 1/3}Nb{sub 2/3})O{sub 3} ceramic at x=0.25 was prepared by a columbite precursor method. The microstructure analysis was done by scanning electron microscope. The field dependences of the dielectric response and the conductivity were measured in a frequency range from 100 Hz to 1 MHz and in a temperature range from 110 to 310 K. The frequency dependence of the loss peak is found to obey Arrhenius law with activation energy of approx0.019 eV. An analysis of the real and imaginary parts of the dielectric permittivity with frequency has been performed, assuming a distribution of relaxation times as confirmed by Cole-Cole plot. The frequency dependent electrical data were also analyzed in the framework of the conductivity and modulus formalism. Both these formalisms provided qualitative similarities in the relaxation times.

  12. Colonic diverticulosis: evaluation with double contrast barium enema

    Energy Technology Data Exchange (ETDEWEB)

    Ko, Jae Kook; Lee, Jong Koo; Yun, Eun Joo; Moon, Hee Jung; Shin, Hyun Ja [Korea Veterans Hospital, Seoul (Korea, Republic of)

    1997-02-01

    To evaluate the pattern of colonic diverticulosis according to age and sex, and recent trend. The authors retrospectively reviewed 120 cases of colonic diverticulosis in 1,020 patients who had undergone a double contrast barium enema examination between January 1st, 1993, and December 31st, 1995, and analyzed the frequency, size, multiplicity and anatomical site, according to age and sex. Diverticulum size was classified into one of three groups : less than 5mm, 5-10mm, over 10mm in diameter. The overall incidence of colonic diverticulosis was 120 cases among 1,020 patients(11.8%) with an incidence 5.3 times higher in males than in females. Peak incidence was in the fifth decade, with 19 cases (15.8%) among males, and after the sixth decade, with four cases(3.3%) among females. Mean age was 57.7 years. Diverticulum size of 5-10mm in diameter was predominant (2% of cases); average diameter was 5-6mm. The incidence of colonic diverticulosis was 5.1 times more frequent in the right colon (101 cases) than in the left (20 cases). The overall incidence of colonic diverticulosis has continually increased; in addition it has also recently increased slightly in left-sided colon. This is thought to be due to various factors, both congenital and acquired, including longer life with good health care, constipation, irritable bowel syndrome, stress and the tendency of eating patterns to more closely resemble those of the west.

  13. Barium from a mini r-process in supernovae

    Science.gov (United States)

    Heymann, D.

    1983-01-01

    McCulloch and Wasserburg (1978) have reported nonlinear isotopic anomalies in barium for two Ca-Al-rich inclusions of the Allende carbonaceous chondrite, known as EK-1-4-1 and C-1. In an attempt to account for these anomalies, it has been proposed that Ba from an r-process of nucleosynthesis, containing Ba-135 and Ba-137, was injected into the primeval color system but was not totally homogenized. Questions arise in connection with the relations of Xe isotopes in carbonaceous chondrites. This has prompted Heymann and Dziczkaniec (1979, 1980, 1981) to study the formation of r-Xe, r-Kr, and r-Te by the mini r-process which is thought to occur in the O, Ne-rich shells of Type II supernovae. Lee et al. (1979) have studied the formation of r-Ba, r-Nd, and r-Sm by the same process. Certain differences regarding the approaches used by Lee et al. and by Heymann and Dziczkaniec make it necessary to restudy the work of Lee et al. Attention is given to the survival probabilities of nuclear species of interest, taking into accounts the elements Cs, Ba, I, and Xe.

  14. Barium in landscape components of the western Transbaikal region

    Science.gov (United States)

    Kashin, V. K.

    2015-10-01

    Barium concentrations in parent materials, soils, and plants of the forest-steppe, steppe, and dry steppe landscapes of the Transbaikal region have been studied. The average concentration of this element in rocks and soils of this region exceeds its clarke by 1.8-2.1 times. A positive correlation between the contents of Ba in soils, soil-forming rocks, and plants has been found. The concentration of Ba in soils does not correlate with the soil pH and humus content. Distribution patterns of Ba in the soil profiles have been characterized. With respect to the coefficient of the biological uptake by plants, Ba is assigned to the group of low accumulation (0.55-0.65) for mineral soils and of strong accumulation (6.0) for alluvial bog soils. Average concentrations of Ba in the steppe, meadow, and cultivated vegetation of the region are 1.9-2.3 times higher in comparison with the average concentration of this element in plants of the continents. The biological migration of Ba is most active in meadow landscapes, whereas steppe landscapes are characterized by the least active biological migration of this element.

  15. Flexoelectric sensing using a multilayered barium strontium titanate structure

    Science.gov (United States)

    Kwon, S. R.; Huang, W. B.; Zhang, S. J.; Yuan, F. G.; Jiang, X. N.

    2013-11-01

    The flexoelectric effect has been recently explored for its promise in electromechanical sensing. However, the relatively low flexoelectric coefficients of ferroelectrics inhibit the potential to develop flexoelectric sensing devices. In this paper, a multilayered structure using flexoelectric barium strontium titanate (Ba0.65Sr0.35TiO3 or BST) ceramic was fabricated in an attempt to enhance the effective flexoelectric coefficients using its inherent scale effect, and hence to improve the flexoelectric sensitivity. The performances of piezoelectric and flexoelectric cantilevers with the same dimensions and under the same conditions were compared. Owing to the flexoelectric scaling effect, under the same force input, the BST flexoelectric structure generated a higher charge output than its piezoelectric P(VDF-TrFE) and PMN-30PT counterparts when its thickness was less than 73.1 μm and 1.43 μm, respectively. Also, amplification of the charge output using the multilayered structure was then experimentally verified. The prototyped structure consisted of three layers of 350 μm-thick BST plates with a parallel electric connection. The charge output was approximately 287% of that obtained using a single-layer structure with the same total thickness of the multilayered structure under the same end deflection input, which suggests high sensitivity sensing can be achieved using multilayer flexoelectric structures.

  16. Stability of a highly concentrated solution of epirubicin for conventional transcatheter arterial chemoembolization.

    Science.gov (United States)

    Bennis, Youssef; Savry, Amandine; Correard, Florian; Montana, Marc; Sauzet, Christophe; Gauthier-Villano, Laurence; Pisano, Pascale; Pourroy, Bertrand

    2015-11-30

    Epirubicin is widely used for conventional transcatheter arterial chemoembolization (cTACE) in patients with hepatocellular-carcinoma. However, there is no data about its stability in solution at concentration higher than 2 mg/L, yet needed when mixing it with a standard volume of Lipiodol(®) to produce an efficient water-in-oil emulsion. The aim of this study was therefore to evaluate the stability of a highly concentrated solution of epirubicin for cTACE and verify whether epirubicin solution could be prepared in advance. Fifty milligrams of epirubicin were dissolved in 6 mL of 0.9% sodium chloride and conditioned in brown polypropylene syringe. Physical and chemical stability assays including particles and HPLC-DAD analysis were performed in triplicate, using series of 5 syringes stored over 72 h at 4±2 °C followed by 4h at 22±4°C. Neither weight loss nor pH or spectrum change occurred. No haze or turbidity was observed and the number of subvisible particles was below the recommended limits. Epirubicin concentration remained above 95% of the initial value over the 72 h of storage at +4 °C followed by 4h at 22±4 °C and no degradation was observed. Epirubicin at 50mg/6 mL in 0.9% NaCl conditioned in brown propylene syringe is stable for at least 72 h at 4±2 °C with additional 4h at 22±4 °C allowing its preparation in advance for programmed cTACE and the standardization of its use in clinical practice. Copyright © 2015 Elsevier B.V. All rights reserved.

  17. High concentrations of manganese and sulfur in deposits on Murray Ridge, Endeavour Crater, Mars

    Science.gov (United States)

    Arvidson, Raymond E.; Squyres, Steven W.; Morris, Richard V.; Knoll, Andrew H.; Gellert, Ralf; Clark, Benton C.; Catalano, Jeffrey G.; Jolliff, Bradley L.; McLennan, Scott M.; Herkenhoff, Kenneth E.; VanBommel, Scott; Mittelfehldt, David W.; Grotzinger, John P.; Guinness, Edward A.; Johnson, Jeffrey R.; Bell, James F.; Farrand, William H.; Stein, Nathan; Fox, Valerie K.; Golombek, Matthew P.; Hinkle, Margaret A. G.; Calvin, Wendy M.; de Souza, Paulo A.

    2016-01-01

    Mars Reconnaissance Orbiter HiRISE images and Opportunity rover observations of the ~22 km wide Noachian age Endeavour Crater on Mars show that the rim and surrounding terrains were densely fractured during the impact crater-forming event. Fractures have also propagated upward into the overlying Burns formation sandstones. Opportunity’s observations show that the western crater rim segment, called Murray Ridge, is composed of impact breccias with basaltic compositions, as well as occasional fracture-filling calcium sulfate veins. Cook Haven, a gentle depression on Murray Ridge, and the site where Opportunity spent its sixth winter, exposes highly fractured, recessive outcrops that have relatively high concentrations of S and Cl, consistent with modest aqueous alteration. Opportunity’s rover wheels serendipitously excavated and overturned several small rocks from a Cook Haven fracture zone. Extensive measurement campaigns were conducted on two of them: Pinnacle Island and Stuart Island. These rocks have the highest concentrations of Mn and S measured to date by Opportunity and occur as a relatively bright sulfate-rich coating on basaltic rock, capped by a thin deposit of one or more dark Mn oxide phases intermixed with sulfate minerals. We infer from these unique Pinnacle Island and Stuart Island rock measurements that subsurface precipitation of sulfate-dominated coatings was followed by an interval of partial dissolution and reaction with one or more strong oxidants (e.g., O2) to produce the Mn oxide mineral(s) intermixed with sulfate-rich salt coatings. In contrast to arid regions on Earth, where Mn oxides are widely incorporated into coatings on surface rocks, our results demonstrate that on Mars the most likely place to deposit and preserve Mn oxides was in fracture zones where migrating fluids intersected surface oxidants, forming precipitates shielded from subsequent physical erosion.

  18. Formation of calcium phosphates by vapour diffusion in highly concentrated ionic micro-droplets

    Energy Technology Data Exchange (ETDEWEB)

    Iafisco, M. [Alma Mater Studiorum Universita di Bologna, Dipartimento di Chimica ' ' G. Ciamician' ' , Via Selmi 2, 40126 Bologna (Italy); Universita del Piemonte Orientale, Dipartimento di Scienze Mediche, Via Solaroli 4, 28100 Novara (Italy); Delgado-Lopez, J.M.; Gomez-Morales, J.; Hernandez-Hernandez, M.A.; Rodriguez-Ruiz, I. [Laboratorio de Estudios Cristalograficos, IACT CSIC-UGR, Edificio Lopez Neyra, Avenida del Conocimiento, s/n 18100 Armilla (Spain); Roveri, N. [Alma Mater Studiorum Universita di Bologna, Dipartimento di Chimica ' ' G. Ciamician' ' , Via Selmi 2, 40126 Bologna (Italy)

    2011-08-15

    In this work we have used the sitting drop vapour diffusion technique, employing the ''crystallization mushroom '' to analyze the evolution of calcium phosphate crystallization in micro-droplets containing high initial concentrations of Ca{sup 2+} and HPO{sub 4}{sup 2-}. The decomposition of NH{sub 4}HCO{sub 3} solution produces vapours of NH{sub 3} and CO{sub 2} which diffuse through the droplets containing an aqueous solution of Ca(CH{sub 3}COO){sub 2} and (NH{sub 4}){sub 2}HPO{sub 4}. The result is the increase of pH by means of the diffusion of NH{sub 3} gas and the doping of the calcium phosphate with CO{sub 3}{sup 2-} ions by means of the diffusion of CO{sub 2} gas. The pH of the crystallization process is monitored and the precipitates at different times are characterized by XRD, FTIR, TGA, SEM and TEM techniques. The slow increase of pH and the high concentration of Ca{sup 2+} and HPO{sub 4}{sup 2-} in the droplets induce the crystallization of three calcium phosphate phases: dicalcium phosphate dihydrate (DCPD, brushite), octacalcium phosphate (OCP) and carbonate-hydroxyapatite (HA). The amount of HA nanocrystals with needle-like morphology and dimensions of about 100 nm, closely resembling the inorganic phase of bones, gradually increases, with the precipitation time up to 7 days, whereas the amount of DCPD, growing along the b axis, increases up to 3 days. Then, DCDP crystals start to hydrolyze yielding OCP nanoribbons and HA nanocrystals. (copyright 2011 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  19. High Concentrations of Ozone Air Pollution on Mount Everest: Health Implications for Sherpa Communities and Mountaineers.

    Science.gov (United States)

    Semple, John L; Moore, G W Kent; Koutrakis, Petros; Wolfson, Jack M; Cristofanelli, Paolo; Bonasoni, Paolo

    2016-12-01

    Semple, John L., G.W. Kent Moore, Petros Koutrakis, Jack M. Wolfson, Paolo Cristofanelli, and Paolo Bonasoni. High concentrations of ozone air pollution on Mount Everest: health implications for Sherpa communities and mountaineers. High Alt Med Biol. 17:365-369, 2016.-Introduction: Populations in remote mountain regions are increasingly vulnerable to multiple climate mechanisms that influence levels of air pollution. Few studies have reported on climate-sensitive health outcomes unique to high altitude ecosystems. In this study, we report on the discovery of high-surface ozone concentrations and the potential impact on health outcomes on Mount Everest and the high Himalaya. Surface ozone measurements were collected during ascending transects in the Mount Everest region of Nepal with passive nitrite-coated Ogawa filter samplers to obtain 8-hour personal exposures (2860-5364 m asl). In addition, the Nepal Climate Observatory-Pyramid, a GAW-WMO Global Station sited in the Khumbu Valley (5079 m asl), collected ozone mixing ratios with photometric gas analyzer. Surface ozone measurements increased with altitude with concentrations that exceed 100 ppb (8-hour exposure). Highest values were during the spring season and the result of diverse contributions: hemispheric background values, the descent of ozone-rich stratospheric air, and the transport of tropospheric pollutants occurring at different spatial scales. Multiple climate factors, including descending stratospheric ozone and imported anthropogenic air masses from the Indo-Gangetic Plain, contribute to ambient ozone exposure levels in the vicinity of Mount Everest that are similar to if not higher than those reported in industrialized cities.

  20. Effects of high concentrations of dietary crude glycerin on dairy cow productivity and milk quality.

    Science.gov (United States)

    Ezequiel, J M B; Sancanari, J B D; Machado Neto, O R; da Silva, Z F; Almeida, M T C; Silva, D A V; van Cleef, F O S; van Cleef, E H C B

    2015-11-01

    An increasing worldwide interest in alternative fuel sources and in a more diversified energy matrix has provided incentives for the biodiesel industry, generating large amounts of the by-product crude glycerin, a potential alternative feed for dairy cows. A replicated 3×3 Latin square study was conducted to evaluate the effects of high concentrations of crude glycerin on dry matter intake, milk yield and composition, milk fatty acid profile, and blood metabolites of medium-yield cows. Ruminally cannulated Holstein cows (n=6; 587 ± 39 kg of body weight; 114 ± 29 d in milk; and 20 ± 1.5 kg/d milk yield) were used in the study. The experimental period included 2 wk for adaptation and 1 wk for data collection. Cows were fed diets containing 0 (control), 15, or 30% crude glycerin (83% glycerol). Cows were milked, milk weights were recorded twice daily, and milk samples were collected for milk quality analyses at d 18 and 19 in each experimental period. Feeding cows with crude glycerin linearly decreased dry-matter intake, the 3.5% fat-corrected milk, and the solid-corrected milk yield. Hepatic enzymes were not affected by dietary treatments, except gamma-glutamyl transferase, which was decreased with the 15% crude glycerin diet. Serum glucose and albumin showed quadratic effect with increasing inclusion of crude glycerin. Plasma cholesterol as well as total protein linearly decreased with increasing inclusion of crude glycerin. Milk fat concentration and yield showed a quadratic effect of treatments. Solid yield decreased linearly with increasing inclusion of crude glycerin. Odd-chain fatty acids and conjugated linoleic acid in milk fat linearly increased with addition of crude glycerin in the diets. Together, these results suggest that crude glycerin has potential to replace corn; however, feeding diets in which corn is replaced with crude glycerin at 30% of dietary DM greatly reduces animal performance. Copyright © 2015 American Dairy Science Association

  1. Squeeze flow rheometry as a novel tool for the characterization of highly concentrated protein solutions.

    Science.gov (United States)

    Schermeyer, Marie-Therese; Sigloch, Heike; Bauer, Katharina C; Oelschlaeger, Claude; Hubbuch, Jürgen

    2016-03-01

    This study aims at defining rheological parameters for the characterization of highly concentrated protein solutions. As a basis for comparing rheological behavior with protein solution characteristics the protein phase behavior of Lysozyme from chicken egg white with concentrations up to 225 mg/mL, changing pH values and additive concentrations was studied in a microbatch scale format. The prepared phase diagrams, scored after 40 days (t40) give insights into the kind and kinetics of the phase transitions that occur. Oscillatory frequency sweep measurements of samples with exactly the same conditions were conducted immediately after preparation (t0). The protein solutions behave viscoelastic and show a characteristic curve shape of the storage modulus (G') and the loss modulus (G″). The graphs provide information about the cross-linking degree of the respective sample. The measured rheological parameters were sensitive concerning solution composition, protein concentration and solution inner structure. The rheological moduli G' and G″ and especially the ratio of these parameters over a frequency range from 100 to 40000 rad/sec give information about the aggregation tendency of the protein under tested conditions. We succeeded to correlate protein phase behavior with the defined rheological key parameter ωCO. This point represents the frequency value of the intersection point from G' and G″. In our study Lysozyme expressed a ωCO threshold value of 20000 rad/sec as a lower limit for stable protein solutions. The predictability of lysozyme aggregation tendency and crystallization by means of squeeze flow rheometry is shown. © 2015 Wiley Periodicals, Inc.

  2. Sulphated glycosaminoglycans support an assortment of planarian rhabdite structures.

    Science.gov (United States)

    Hayes, Matthew J

    2017-05-15

    Planaria are soft-bodied, bilateral flatworms of the phylum Platyhelminthes. They are covered in cilia and use ciliary-gliding to traverse the substratum while hunting. Their body surface is covered in a layer of viscous slime primarily derived from specialised secretory granules known as rhabdites. The slime must somehow stay associated with the surface of the animal in aqueous environments whilst also lubricating the interface of the animal and the surfaces over which the animal moves. The slime prevents damage to the animal's soft body and also contributes to adhesion to the substratum. In order to gain insight into how it might achieve these diverse functions, we performed electron microscopic examination of the slime's structure. Analysis of two freshwater flatworms from the UK Schmidtea polychroa (Schmidt, 1861) and Polycelis tenuis (Ijima, 1884) revealed a high level of organisation of the slime layer and a variety of ejected slime structures. We show that these structures are rich in sulphated glycosaminoglycans (sGAGs). Most of these (269 of 285 examined) appear to be topologically closed spheroids that we name ball-GAGs. Another class appears to burst to release flower- and star-like clusters which adhere to motile cilia. We also observe fibrous nets that are associated with entrapped bacteria. Examination of the structure of rhabdites ejected onto a porous surface suggests a mechanism by which their structure allows them to both bind to the porous surface and provide a smooth layer over which the animal could glide. Such sGAG-based structures might provide models for the design of artificial biomimetic replacements for tears, saliva, bio-compatible lubricants or drug-delivery vehicles. © 2017. Published by The Company of Biologists Ltd.

  3. Clearance of sodium lauryl sulphate from the oral cavity.

    Science.gov (United States)

    Fakhry-Smith, S; Din, C; Nathoo, S A; Gaffar, A

    1997-05-01

    Sodium lauryl sulphate (SLS) is used in toothpaste and mouth rinses as an emulsifying and surface cleaning agent. SLS has been implicated in an increased incidence of oral irritation in subjects predisposed to recurrent aphthous stomatitis (RAU). Hence, the purpose of this study was to determine the levels of SLS found in the oral cavity following rinsing with an SLS containing mouth rinse and brushing with a SLS containing dentifrice. An analytical method to separate SLS from saliva and other complex systems was developed. The method used high performance liquid chromatography (HPLC) and detection performed using conductivity measurements. Standard curves with known concentrations showed a detection limit of less than 0.4 ug SLS/ml of fluid. 2 clinical studies were conducted to determine the amount of SLS retained in the mouth by a healthy population after rinsing or brushing with commercially available products. The results showed, after rinsing, that 96% of the available SLS from the rinse was recovered in the collected samples within 2 min. Similarly, after brushing, 86% of the SLS contained within the toothpaste was recovered from the collected samples within the first 10 min. These results showed that the amount of SLS retained in the oral cavity was minimal and the contact time between SLS and the oral cavity was very short. A 2nd study was conducted to measure the amount of SLS retained in the mouth by a population susceptible to RAU. After rinsing, 97% of the available SLS was recovered within the first 2 min. Following brushing, 89% of the SLS in the dentifrice was recovered within the first 10 min. These results were comparable to those determined by the study involving the healthy population.

  4. Thermochemical sulphate reduction can improve carbonate petroleum reservoir quality

    Science.gov (United States)

    Jiang, Lei; Worden, Richard H.; Yang, Changbing

    2018-02-01

    Interest in the creation of secondary pore spaces in petroleum reservoirs has increased because of a need to understand deeper and more complex reservoirs. The creation of new secondary porosity that enhances overall reservoir quality in deeply buried carbonate reservoirs is controversial and some recent studies have concluded it is not an important phenomenon. Here we present petrography, geochemistry, fluid inclusion data, and fluid-rock interaction reaction modeling results from Triassic Feixianguan Formation, Sichuan Basin, China, core samples and explore the relative importance of secondary porosity due to thermochemical sulphate reduction (TSR) during deep burial diagenesis. We find that new secondary pores result from the dissolution of anhydrite and possibly from dissolution of the matrix dolomite. Assuming porosity before TSR was 16% and the percentage of anhydrite was 6%, modelling shows that, due to TSR, 1.6% additional porosity was created that led to permeability increasing from 110 mD (range 72-168 mD within a 95% confidence interval) to 264 mD (range 162-432 mD within a 95% confidence interval). Secondary porosity results from the density differences between reactant anhydrite and product calcite, the addition of new water during TSR, and the generation of acidity during the reaction of new H2S with the siderite component in pre-existing dolomite in the reservoir. Fluid pressure was high during TSR, and approached lithostatic pressure in some samples; this transient overpressure may have led to the maintenance of porosity due to the inhibition of compactional processes. An additional 1.6% porosity is significant for reserve calculations, especially considering that it occurs in conjunction with elevated permeability that results in faster flow rates to the production wells.

  5. [Neuroprotection for preterm infants with antenatal magnesium sulphate].

    Science.gov (United States)

    Marret, S; Ancel, P-Y

    2016-12-01

    To evaluate in preterm born children the neuroprotective benefits and the risks, at short- and long-term outcome, of the antenatal administration of magnesium sulphate (MgSO4) in women at imminent risk of preterm delivery. Computer databases Medline, the Cochrane Library and the recommendations of various international scientific societies. Given the demonstrated benefit of antenatal MgSO4 intravenous administration on the reduction of cerebral palsy rates and the improvement of motor development in children born preterm, it is recommended for all women whose imminent delivery is expected or programmed before 32 weeks of gestation (WG) (grade A). The analysis of the literature finds no argument for greater benefit of antenatal MgSO4 administration in sub-groups of gestational age, or depending on the type of pregnancy (single or multiple pregnancy) or with the cause of preterm birth (NP2). Its administration is recommended before 32 WG, if single or multiple pregnancy, whatever the cause of prematurity (grade B). It is recommended 4g loading dose (professional consensus). With a loading dose of 4g intravenous (IV) in 20min, the serum magnesium is lower than with intramuscular suggesting a preference for the IV route (professional consensus). It is proposed to use a maintenance dose of 1g/h until delivery with a maximum recommended duration of 12hours without exceeding a cumulative dose of 50g (professional consensus). These doses are without severe adverse maternal side effects or adverse effects in newborns at short- and medium-term outcome (NP1). It is recommended to administer magnesium sulfate to the women at high risk of imminent preterm birth before 32 WG, whether expected or planned (grade A), with a 4g IV loading dose followed by a maintenance dose of 1g/h for 12hours (professional consensus), the pregnancy is single or multiple, whatever the cause of prematurity (professional consensus). Copyright © 2016. Published by Elsevier Masson SAS.

  6. Heparan sulphate as a regulator of leukocyte recruitment in inflammation.

    Science.gov (United States)

    Kumar, Archana V; Katakam, Sampath K; Urbanowitz, Ann-Kathrin; Gotte, Martin

    2015-01-01

    A key event in inflammatory disease is the transendothelial recruitment of leukocytes from the circulation to the site of inflammation. Intense research in the past decades indicates that the polyanionic carbohydrate heparan sulphate (HS) modulates multiple steps in the leukocyte recruitment cascade. Leukocyte recruitment is initiated by endothelial cell activation and presentation of chemokines to rolling leukocytes, which, via integrin activation, results in adhesion and diapedesis through the vessel wall. Heparan sulfate proteoglycans (HSPGs) immobilize the chemokines on the luminal endothelial cells, rendering them more robust against mechanical or hydrodynamic perturbations. During inflammation, endothelial HSPGs serve as ligands to L-selectin on leukocytes, transport chemokines in a basolateral to apical direction across the endothelium, and present chemokines at the luminal surface of the endothelium to circulating cells. HSPGs also promote chemokine oligomerization, which influences chemokine receptor signaling. Furthermore, proteoglycans of the syndecan family are involved in modulating integrin-mediated tight adhesion of leukocytes to the endothelium. Creation of a chemokine gradient by a localized chemokine release influences the speed of leukocyte recruitment from the blood to the tissue by attracting crawling neutrophils to optimal sites for transmigration. The directionality of intraluminal crawling is thought to be influenced by both mechanotactic and haptotactic signals, which are modulated by HS-dependent signaling processes. Finally, diapedesis is influenced by HS regarding transendothelial chemokine gradient formation and integrin- CAM interactions, and further enhanced by heparanase-mediated degradation of the endothelial basement membrane. Overall, the multifunctional role of HS in inflammation marks it as a potential target of glycan-centered therapeutic approaches.

  7. Sulphated glycosaminoglycans support an assortment of planarian rhabdite structures

    Directory of Open Access Journals (Sweden)

    Matthew J. Hayes

    2017-05-01

    Full Text Available Planaria are soft-bodied, bilateral flatworms of the phylum Platyhelminthes. They are covered in cilia and use ciliary-gliding to traverse the substratum while hunting. Their body surface is covered in a layer of viscous slime primarily derived from specialised secretory granules known as rhabdites. The slime must somehow stay associated with the surface of the animal in aqueous environments whilst also lubricating the interface of the animal and the surfaces over which the animal moves. The slime prevents damage to the animal's soft body and also contributes to adhesion to the substratum. In order to gain insight into how it might achieve these diverse functions, we performed electron microscopic examination of the slime's structure. Analysis of two freshwater flatworms from the UK Schmidtea polychroa (Schmidt, 1861 and Polycelis tenuis (Ijima, 1884 revealed a high level of organisation of the slime layer and a variety of ejected slime structures. We show that these structures are rich in sulphated glycosaminoglycans (sGAGs. Most of these (269 of 285 examined appear to be topologically closed spheroids that we name ball-GAGs. Another class appears to burst to release flower- and star-like clusters which adhere to motile cilia. We also observe fibrous nets that are associated with entrapped bacteria. Examination of the structure of rhabdites ejected onto a porous surface suggests a mechanism by which their structure allows them to both bind to the porous surface and provide a smooth layer over which the animal could glide. Such sGAG-based structures might provide models for the design of artificial biomimetic replacements for tears, saliva, bio-compatible lubricants or drug-delivery vehicles.

  8. Effect of temperature on sulphate reduction, growth rate and growth yield in five psychrophilic sulphate-reducing bacteria from Arctic sediments

    DEFF Research Database (Denmark)

    Knoblauch, C.; Jørgensen, BB

    1999-01-01

    Five psychrophilic sulphate-reducing bacteria (strains ASv26, LSv21, PSv29, LSv54 and LSv514) isolated from Arctic sediments were examined for their adaptation to permanently low temperatures, All strains grew at -1.8 degrees C, the freezing point of sea water, but their optimum temperature...

  9. Low-Cost High-Concentration Photovoltaic Systems for Utility Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, R.; Garboushian, V.; Gordon, R.; Dutra, D.; Kinsey, G.; Geer, S.; Gomez, H.; Cameron, C.

    2012-03-31

    Under DOE's Technology Pathway Partnership (TPP) program, Amonix, Inc. developed a new generation of high-concentration photovoltaic systems using multijunction technology and established the manufacturing capacity needed to supply multi-megawatt power plants buing using the new Amonix 7700-series solar energy systems. For this effort, Amonix Collaborated with a variety of suppliers and partners to complete project tasks. Subcontractors included: Evonik/Cyro; Hitek; the National Renewable Energy Laboratory (NREL); Raytech; Spectrolab; UL; University of Nevada, Las Vegas; and TUV Rheinland PTL. The Amonix TPP tasks included: Task 1: Multijunction Cell Optimization for Field Operation, Task 2: Fresnel Lens R&D, Task 3: Cell Package Design & Production, Task 4: Standards Compliance and Reliability Testing, Task 5: Receiver Plate Production, Task 6: MegaModule Performance, Task 7: MegaModule Cost Reduction, Task 8: Factory Setup and MegaModule Production, Task 9: Tracker and Tracking Controller, Task 10: Installation and Balance of System (BOS), Task 11: Field Testing, and Task 12: Solar Advisor Modeling and Market Analysis. Amonix's TPP addressed nearly the complete PV value chain from epitaxial layer design and wafer processing through system design, manufacturing, deployment and O&M. Amonix has made progress toward achieving these reduced costs through the development of its 28%+ efficient MegaModule, reduced manufacturing and installation cost through design for manufacturing and assembly, automated manufacturing processes, and reduced O&M costs. Program highlights include: (1) Optimized multijunction cell and cell package design to improve performance by > 10%; (2) Updated lens design provided 7% increased performance and higher concentration; (3) 28.7% DC STC MegaModule efficiency achieved in Phase II exceeded Phase III performance goal; (4) New 16' focal length MegaModule achieved target materials and manufacturing cost reduction; (5) Designed and

  10. Biodegradation of high concentrations of phenol by baker’s yeast in anaerobic sequencing batch reactor

    Directory of Open Access Journals (Sweden)

    Ali Asghar Najafpoor

    2015-06-01

    Full Text Available Background: Phenol, as a pure substance, is used in many fields because of its disinfectant, germicidal, local anesthetic, and peptizing properties. Aqueous solutions of phenol are produced as waste in industries and discharged into the environment. Therefore, elevated concentrations of phenol may be found in air or water because of industrial discharge or the use of phenolic products. Method: The strains of Saccharomyces cerevisiae used in this project were natural strains previously purchased from Razavy company. They were grown at 30°C on Petri plates containing yeast extract glucose (YGC and then purified by being spread onto new plates, and isolated colonies were obtained. These colonies provided the basis of selection. Prepared strains were applied in anaerobic sequencing batch reactors (ASBRs as first seed. The experiment conditions were optimized using response surface methodology (RSM. After the determined runs were performed using Design-Expert software, data were analyzed using mentioned software as well. Results: This study evaluated the capability of baker’s yeast to remove phenol in high concentrations. The tested strains showed excellent tolerance to phenol toxicity at concentrations up to 6100 mg/L. Study of the batch degradation process showed that the phenol removal rate could exceed 99.9% in 24 hours at a concentration of 1000 mg/L. The results showed catechol is the first intermediate product of phenol degradation. In survey results of the Design–Expert software, R2 and Adeq precision were 0.97 and 25.65, respectively. Conclusion: The results demonstrated that ASBR performs robustly under variable influent concentrations of inhibitory compounds. The high removal performance despite the high phenol concentration may be a result of reactor operating strategies. Based on the progressive increase of inlet phenol concentration, allowing for an enhanced biomass acclimation in a short time, results at the microbiological levels

  11. Physical stability of highly concentrated injectable drugs solutions used in intensive care units.

    Science.gov (United States)

    Closset, M; Hecq, J D; Soumoy, L; Simar, J; Gonzalez, E; Charlet, L; Declave, C; Gillet, P; Galanti, L

    2017-05-01

    The intensive care department of the institution use drug solutions within higher concentration to avoid fluid overload. The purpose of the study is to prove the physical stability of different injectable drugs within high concentration (amiodarone 25mg/mL, isosorbide 0.60mg/mL, lorazepam 0.16mg/mL, noradrenalin 0.120 and 0.240mg/mL, salbutamol 0.06mg/mL and sodium valproate 12mg/mL) to ensure the patients safety. Five of 30 or 50mL polypropylene syringes were prepared for each solution under aseptic conditions and stored at room temperature. Immediately after the preparation (hour 0) and after 1, 4, 8, 24 and 48hours, 2mL of each solution were withdrawn from each syringe and placed in glass tubes to proceed to the stability test. All specimens were visually inspected in front of a black and of a white background and aliquots of each solution were centrifuged to proceed to microscopic inspection with a ten-fold magnification. The pH of each solution was measured with glass electrode pH-meter (Inolab level 1, WTW Weilhem, Germany with biotrode electrode, Hamilton, Bonaduz, Switzerland) and spectrophotometric measurements (Genesys 10 series, New-York, USA) were performed at three wavelengths (350, 410 and 550nm) to avoid the apparition of turbidity. For all the drugs included in the study, there was no significant change in pH, no color change, no turbidity or opacity and no precipitation observed in the solutions during the storage at room temperature for 48hours. No microaggregates were detected by microscope neither revealed by a change of absorbance. Within these limits, the preparations of amiodarone in 5% glucose polypropylene syringes and isosorbide, lorazepam, noradrenalin, salbutamol, valproate in 0.9% sodium chloride polypropylene syringes are physically stable at room temperature for 48hours. These results allow us to consider a study of chemical stability by high-performance liquid chromatography (HPLC). Copyright © 2016 Académie Nationale de Pharmacie

  12. High concentrations of cadmium, cerium and lanthanum in indoor air due to environmental tobacco smoke.

    Science.gov (United States)

    Böhlandt, Antje; Schierl, Rudolf; Diemer, Juergen; Koch, Christoph; Bolte, Gabriele; Kiranoglu, Mandy; Fromme, Hermann; Nowak, Dennis

    2012-01-01

    Environmental tobacco smoke (ETS) is one of the most important sources for indoor air pollution and a substantial threat to human health, but data on the concentrations of the trace metals cerium (Ce) and lanthanum (La) in context with ETS exposure are scarce. Therefore the aim of our study was to quantify Ce and La concentrations in indoor air with high ETS load. In two subsequent investigations Ce, La and cadmium (Cd) in 3 smokers' (11 samples) and 7 non-smokers' (28 samples) households as well as in 28 hospitality venues in Southern Germany were analysed. Active sampling of indoor air was conducted continuously for seven days in every season in the smokers' and non-smokers' residences, and for 4h during the main visiting hours in the hospitality venues (restaurants, pubs, and discotheques). In terms of residences median levels of Cd were 0.1 ng/m(3) for non-smokers' and 0.8 ng/m(3) for smokers' households. Median concentrations of Ce were 0.4 ng/m(3) and 9.6 ng/m(3), and median concentrations of La were 0.2 ng/m(3) and 5.9 ng/m(3) for non-smokers' and for smokers' households, respectively. In the different types of hospitality venues median levels ranged from 2.6 to 9.7 ng/m(3) for Cd, from 18.5 to 50.0 ng/m(3) for Ce and from 10.6 to 23.0 ng/m(3) for La with highest median levels in discotheques. The high concentrations of Ce and La found in ETS enriched indoor air of smokers' households and hospitality venues are an important finding as Ce and La are associated with adverse health effects and data on this issue are scarce. Further research on their toxicological, human and public health consequences is urgently required. Copyright © 2011 Elsevier B.V. All rights reserved.

  13. Metallographic examination of hardened layers after surface treatments by highly concentrated plasma jet

    Directory of Open Access Journals (Sweden)

    Сергій Савелійович Самотугін

    2017-07-01

    Full Text Available The microstructure of carbon and alloy steels with various carbon contents before and after the gradient hardening by means of highly concentrated plasma jet have been investigated. It is shown that the resulting structure after the surface hardening has a substantially smaller grain size as compared to the bulk hardening. The steels with different carbon content, that is hypoeutectic steels 45 and 50HN, eutectic steels – M76, U8, hypereutectoid steels – 90HF, U10 have been researched. Processing was carried out under the optimal conditions to ensure the highest hardness of the surface without melting. Metalgraphical studies were carried out using optical and scanning electron microscopes. High-dispersed martensite is the main structural component for hypoeutectic steels. Despite the fact that the heating temperature and the cooling rate in different parts of the plasma exposure zone differ greatly, the structure of the tempered zone is uniform by both the degree of dispersion and by the values of hardness. Plasma treatment of eutectic steels results in fine-grained structure of martensite of mainly lamellar morphology. High-dispersed martensite with microparticles of secondary carbides is characteristic of the hardened zones for hypereutectic steels. But austenite grains do not grow at heating as it usually happens in bulk hardening. The structure of the transition zone corresponds to part-hardened steels. So excess ferrite as well as martensite retains in hypoeutectic steels while excess cementite retains in hypereutectic steels. Eutectic steels are free from the intercritical interval, and the transition zone does not practically develop, there being a very sharp boundary between the zone of full hardening and the parent metal. Due to this structure of the plasma hardening zone of the surface layer there arises 3,5...4,5-fold increase in the hardness of the steel as compared with the normalized condition. This is due to the increase in

  14. Concurrent microbial reduction of high concentrations of nitrate and perchlorate in an ion exchange membrane bioreactor.

    Science.gov (United States)

    Fox, Shalom; Bruner, Tali; Oren, Yoram; Gilron, Jack; Ronen, Zeev

    2016-09-01

    acceptors. Such a mechanism has important implications for controlling the bio-reduction reaction in the IEMB when using glycerol as a carbon source and allowing treating a complex contamination of high concentrations of perchlorate and nitrating in groundwater and successfully biodegrading them to non-hazardous components. Biotechnol. Bioeng. 2016;113: 1881-1891. © 2016 Wiley Periodicals, Inc. © 2016 Wiley Periodicals, Inc.

  15. Effect of barium sulfate contrast medium on rheology and sensory texture attributes in a model food.

    Science.gov (United States)

    Ekberg, O; Bulow, M; Ekman, S; Hall, G; Stading, M; Wendin, K

    2009-03-01

    The swallowing process can be visualized using videoradiography, by mixing food with contrast medium, e.g., barium sulfate (BaSO(4)), making it radiopaque. The sensory properties of foods may be affected by adding this medium. To evaluate if and to what extent sensory and rheological characteristics of mango purée were altered by adding barium sulfate to the food. This study evaluated four food samples based on mango purée, with no or added barium sulfate contrast medium (0%, 12.5%, 25.0%, and 37.5%), by a radiographic method, and measured sensory texture properties and rheological characteristics. The sensory evaluation was performed by an external trained panel using quantitative descriptive analysis. The ease of swallowing the foods was also evaluated. The sensory texture properties of mango purée were significantly affected by the added barium in all evaluated attributes, as was the perception of particles. Moreover, ease of swallowing was significantly higher in the sample without added contrast medium. All samples decreased in extensional viscosity with increasing extension rate, i.e., all samples were tension thinning. Shear viscosity was not as dependent on the concentration of BaSO(4) as extensional viscosity. Addition of barium sulfate to a model food of mango purée has a major impact on perceived sensory texture attributes as well as on rheological parameters.

  16. Colonoscopy can miss diverticula of the left colon identified by barium enema

    Science.gov (United States)

    Niikura, Ryota; Nagata, Naoyoshi; Shimbo, Takuro; Akiyama, Junichi; Uemura, Naomi

    2013-01-01

    AIM: To identify the diagnostic value of colonoscopy for diverticulosis as determined by barium enema. METHODS: A total of 65 patients with hematochezia who underwent colonoscopy and barium enema were analyzed, and the diagnostic value of colonoscopy for diverticula was assessed. The receiver operating characteristic area under the curve was compared in relation to age (barium enema. Colonoscopy had a sensitivity of 91% and specificity of 90%. No significant differences were found in the receiver operating characteristic area under the curve (ROC-AUC) for age group or sex. The ROC-AUC of the left colon was significantly lower than that of the right colon (0.81 vs 0.96, P = 0.02). Colonoscopy identified 486 colonic diverticula, while barium enema identified 1186. The detection ratio for the entire colon was therefore 0.41 (486/1186). The detection ratio in the left colon (0.32, 189/588) was significantly lower than that of the right colon (0.50, 297/598) (P barium enema, only half the number of colonic diverticula can be detected by colonoscopy in the entire colon and even less in the left colon. PMID:23613630

  17. Diagnosis of hirschsprung's disease: accuracy of barium enema findings

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Sue Yun; Lim, Gye Yeon; Yun, Ji Yeong; Hahn, Seong Tae; Kim, Hak Hee; Lee, Jae Mun; Kim, Choon Yul; Shinn, Kyung Sub [Catholic Univ. College of Medicine, Seoul (Korea, Republic of)

    1997-04-01

    To determine the relative accuracy of barium enema findings of Hirschsprung's disease (HD) and to calculate a level of probability for three signs combined. Barium enema findings in 45 patients who had undergone rectal biopsy to prove or exclude the diagnosis of HD were retrospectively analyzed by evaluating the presence of a transition zone, irregular contractions and delayed evacuation of barium. Seventeen were neonates (group 1) and the other 28 were infants and children (group 2). The sensitivity, specificity, and positive and negative predictive values of the findings were compared. In visualization of a transition zone, sensitivity, specificity and positive predictive value were 76.5%, 72.7% and 89.7%, respectively. Sensitivity for irregular contractions and delayed evacuation of barium was 76.5% and 91.7%, respectively, whereas for specificity, the corresponding values were 63.6% and 40%. Sensitivities for radiologic signs were higher in group 1 than 2, but, the specificities were lower. If two or three findings were positive, the level of probability was 85-100%. If two findings were negative, however, the corresponding value was 30%. We conclude that the most reliable HD finding is the presence of a transition zone. Irregular contractions and the delayed evacuation of barium are not specific. Two or three positive findings may suggest a higher probability of HD than any single positive findings alone.

  18. Fabrication of barium/strontium carbonate coated amorphous carbon nanotubes as an improved field emitter

    Energy Technology Data Exchange (ETDEWEB)

    Maity, S. [Jadavpur University, Thin Film and Nanoscience Laboratory, Department of Physics, Kolkata (India); Jha, A.; Das, N.S. [Jadavpur University, School of Materials Science and Nanotechnology, Kolkata (India); Chattopadhyay, K.K. [Jadavpur University, Thin Film and Nanoscience Laboratory, Department of Physics, Kolkata (India); Jadavpur University, School of Materials Science and Nanotechnology, Kolkata (India)

    2013-02-15

    Amorphous carbon nanotubes (aCNTs) were synthesized by a chemical reaction between ferrocene and ammonium chloride at a temperature {proportional_to}250 {sup circle} C in an air furnace. As-synthesized aCNTs were coated with the barium/strontium carbonate through a simple chemical process. The coating of barium/strontium carbonate was confirmed by a high resolution transmission electron microscopy, X-ray diffraction, and Fourier transformed infrared spectroscopy. Morphology of the as-prepared samples was studied by field emission scanning electron microscopy. Thermal gravimetric analysis showed that barium/strontium carbonate coated aCNTs are more stable than the pristine aCNTs. As-prepared barium/strontium carbonate coated aCNTs showed significantly improved field emission properties with a turn-on field as low as 2.5 V/{mu}m. The variation of field emission characteristics of the barium/strontium carbonate coated aCNTs with interelectrode distances was also studied. (orig.)

  19. Reducing conditions on barium absorption in rice plants cultured in BaSO4-enriched soil doi: 10.4025/actasciagron.v36i1.17539

    Directory of Open Access Journals (Sweden)

    Marcio Osvaldo Lima Magalhães

    2014-01-01

    Full Text Available To evaluate the possible solubilization of barium sulfate in soils under reducing conditions and its effects on barium bioavailability, an Oryza sativa pot trial was established. Increasing barium doses and two redox potential conditions were evaluated. The geochemical fractionation data demonstrated that reducing conditions led to an increase in the levels of more labile forms of barium and a reduction in more stable forms. Furthermore, higher doses of barium were found to have a negative impact on grain production. The highest levels of barium accumulation in the leaves, roots, and grains were observed with the highest barium dose under reducing conditions. These results demonstrate that reducing conditions increased barium bioavailability and absorption by rice plants.

  20. Magnesium sulphate can prolong pregnancy in patients with severe early-onset preeclampsia.

    Science.gov (United States)

    Ueda, Akihiko; Kondoh, Eiji; Kawasaki, Kaoru; Mogami, Haruta; Chigusa, Yoshitsugu; Konishi, Ikuo

    2016-10-01

    To assess whether long-term use of magnesium sulphate prolongs pregnancy in patients with severe early-onset preeclampsia. Retrospective cohort study included all singleton pregnancies with severe early-onset preeclampsia, expectantly managed in our institution between 2005 and 2013. Obstetric and perinatal outcomes were compared between patients managed using a current protocol that tolerates long-term (over 48 h) use of magnesium sulphate (long-term group, n = 26) and a historical control group (control group, n = 15) that underwent conventional treatment (up to 48 h use of magnesium sulphate). Long-term group showed significant prolongation of pregnancy compared with the control group (9.2 ± 7.9 versus 16.6 ± 9.3 d, log-rank test, p = 0.021), which was also observed in patients with severe preeclampsia occurring before 28 weeks' gestation (n = 11, 4.5 ± 5.2 versus 13.2 ± 6.8 d, log-rank test, p = 0.035). In contrast to a progressive decrease of platelet count in patients managed without magnesium sulphate, administration of magnesium sulphate for 7 d prevented the decrease of platelet count (p = 0.001). Thirty two percent of patients (13/41) experienced a major complication irrespective of duration of magnesium sulphate use. Long-term use of magnesium sulphate prolonged pregnancy in patients with severe early-onset preeclampsia and can help alleviate progression of preeclampsia.

  1. Controls on the barium isotope compositions of marine sediments

    Science.gov (United States)

    Bridgestock, Luke; Hsieh, Yu-Te; Porcelli, Donald; Homoky, William B.; Bryan, Allison; Henderson, Gideon M.

    2018-01-01

    The accumulation of barium (Ba) in marine sediments is considered to be a robust proxy for export production, although this application can be limited by uncertainty in BaSO4 preservation and sediment mass accumulation rates. The Ba isotope compositions of marine sediments could potentially record insights into past changes in the marine Ba cycle, which should be insensitive to these limitations, enabling more robust interpretation of sedimentary Ba as a proxy. To investigate the controls on the Ba isotope compositions of marine sediments and their potential for paleo-oceanographic applications, we present the first Ba isotope compositions results for sediments, as well as overlying seawater depth profiles collected in the South Atlantic. Variations in Ba isotope compositions of the sediments predominantly reflect changes in the relative contributions of detrital and authigenic Ba sources, with open-ocean sediments constraining the isotope composition of authigenic Ba to be δ138/134Ba ≈ + 0.1 ‰. This value is consistent with the average isotope composition inferred for sinking particulate Ba using simple mass balance models of Ba in the overlying water column and is hypothesized to reflect the removal of Ba from the upper water column with an associated isotopic fractionation of Δdiss-part 138/134Ba ≈ + 0.4 to +0.5. Perturbations to upper ocean Ba cycling, due to changes in export production and the supply of Ba via upwelling, should therefore be recorded by the isotope compositions of sedimentary authigenic Ba. Such insights will help to improve the reliable application of Ba accumulation rates in marine sediments as a proxy for past changes in export production.

  2. Relaxor properties of barium titanate crystals grown by Remeika method

    Science.gov (United States)

    Roth, Michel; Tiagunov, Jenia; Dul'kin, Evgeniy; Mojaev, Evgeny

    2017-06-01

    Barium titanate (BaTiO3, BT) crystals have been grown by the Remeika method using both the regular KF and mixed KF-NaF (0.6-0.4) solvents. Typical acute angle "butterfly wing" BT crystals have been obtained, and they were characterized using x-ray diffraction, scanning electron microscopy (including energy dispersive spectroscopy), conventional dielectric and acoustic emission methods. A typical wing has a triangular plate shape which is up to 0.5 mm thick with a 10-15 mm2 area. The plate has a (001) habit and an atomically smooth outer surface. Both K+ and F- solvent ions are incorporated as dopants into the crystal lattice during growth substituting for Ba2+ and O2- ions respectively. The dopants' distribution is found to be inhomogeneous, their content being almost an order of magnitude higher (up to 2 mol%) at out surface of the plate relatively to the bulk. A few μm thick surface layer is formed where a multidomain ferroelectric net is confined between two≤1 μm thick dopant-rich surfaces. The layer as a whole possess relaxor ferroelectric properties, which is apparent from the appearance of additional broad maxima, Tm, in the temperature dependence of the dielectric permittivity around the ferroelectric phase transition. Intense acoustic emission responses detected at temperatures corresponding to the Tm values allow to observe the Tm shift to lower temperatures at higher frequencies, or dispersion, typical for relaxor ferroelectrics. The outer surface of the BT wing can thus serve as a relaxor thin film for various electronic application, such as capacitors, or as a substrate for BT-based multiferroic structure. Crystals grown from KF-NaF fluxes contain sodium atoms as an additional impurity, but the crystal yield is much smaller, and while the ferroelectric transition peak is diffuse it does not show any sign of dispersion typical for relaxor behavior.

  3. Sputtered Modified Barium Titanate for Thin-Film Capacitor Applications

    Directory of Open Access Journals (Sweden)

    Robert Mamazza

    2012-04-01

    Full Text Available New apparatus and a new process for the sputter deposition of modified barium titanate thin-films were developed. Films were deposited at temperatures up to 900 °C from a Ba0.96Ca0.04Ti0.82Zr0.18O3 (BCZTO target directly onto Si, Ni and Pt surfaces and characterized by X-ray diffraction (XRD, scanning electron microscopy (SEM and X-ray photoelectron spectroscopy (XPS. Film texture and crystallinity were found to depend on both deposition temperature and substrate: above 600 °C, the as-deposited films consisted of well-facetted crystallites with the cubic perovskite structure. A strongly textured Pt (111 underlayer enhanced the (001 orientation of BCZTO films deposited at 900 °C, 10 mtorr pressure and 10% oxygen in argon. Similar films deposited onto a Pt (111 textured film at 700 °C and directly onto (100 Si wafers showed relatively larger (011 and diminished intensity (00ℓ diffraction peaks. Sputter ambients containing oxygen caused the Ni underlayers to oxidize even at 700 °C: Raising the process temperature produced more diffraction peaks of NiO with increased intensities. Thin-film capacitors were fabricated using ~500 nm thick BCZTO dielectrics and both Pt and Ni top and bottom electrodes. Small signal capacitance measurements were carried out to determine capacitance and parallel resistance at low frequencies and from these data, the relative permittivity (er and resistivity (r of the dielectric films were calculated; values ranged from ~50 to >2,000, and from ~104 to ~1010 Ω∙cm, respectively.

  4. Radiation doses to children during modified barium swallow studies

    Energy Technology Data Exchange (ETDEWEB)

    Weir, Kelly A. [University of Queensland, Discipline of Paediatrics and Child Health, School of Medicine, Herston, Queensland (Australia); McMahon, Sandra M. [SpeechNet Speech Pathology Services, Brisbane (Australia); Long, Gillian; Bunch, Judith A. [Royal Children' s Hospital, Department of Medical Imaging, Herston (Australia); Pandeya, Nirmala [Queensland Institute of Medical Research, Herston (Australia); Coakley, Kerry S. [Biomedical Technology Services, Royal Brisbane and Women' s Hospital, Herston (Australia); Chang, Anne B. [Royal Children' s Hospital, Department of Respiratory Medicine, Herston (Australia)

    2007-03-15

    There are minimal data on radiation doses to infants and children undergoing a modified barium swallow (MBS) study. To document screening times, dose area product (DAP) and effective doses to children undergoing MBS and to determine factors associated with increased screening times and effective dose. Fluoroscopic data (screening time, DAP, kVp) for 90 consecutive MBS studies using pulse fluoroscopy were prospectively recorded; effective dose was calculated and data were analyzed for effects of behavior, number of swallow presentations, swallowing dysfunction and medical problems. Mean effective dose for the entire group was 0.0826 {+-} 0.0544 mSv, screening time 2.48 {+-} 0.81 min, and DAP 28.79 {+-} 41.72 cGy cm{sup 2}. Significant differences were found across three age groups ({<=}1.0, >1.0-3.0 and >3.0 years) for effective dose (mean 0.1188, 0.0651 and 0.0529 mSv, respectively; P < 0.001), but not for screening time or DAP. Effective dose was correlated with screening time (P = 0.007), DAP (P < 0.001), number of swallow presentations (P = 0.007), lower age (P = 0.017), female gender (P = 0.004), and height (P < 0.001). Screening time was correlated with total number of swallow presentations (P < 0.001) and DAP (P < 0.001). Screening times, DAP, effective dose, and child and procedural factors associated with higher effective doses are presented for children undergoing MBS studies. (orig.)

  5. Review and advances of direct methanol fuel cells (DMFCs) part I: Design, fabrication, and testing with high concentration methanol solutions

    Science.gov (United States)

    Li, Xianglin; Faghri, Amir

    2013-03-01

    A review of the experimental studies on passive and semi-passive direct methanol fuel cells (DMFCs) is conducted, with an emphasis on high concentration methanol and pure methanol. Key issues such as methanol transport, water management, oxygen transport, and carbon dioxide release in the DMFC are analyzed in detail. The design and fabrication, development approaches, challenges and opportunities on DMFCs passively fed with high concentration methanol are discussed. The advances of DMFC stacks and prototype developments are presented. Several unresolved issues and challenges in DMFCs are identified and reviewed in detail.

  6. Lifetime determination of the 5d(2) F-3(2) state in barium using trapped atoms

    NARCIS (Netherlands)

    De, S.; Dammalapati, U.; Willmann, L.

    2015-01-01

    Magneto-optically trapped atoms enable the determination of lifetimes of metastable states and higher lying excited states like the 5d(2) F-3(2) state in barium. The state is efficiently populated by driving strong transitions from metastable states within the cooling cycle of the barium

  7. Fast time resolution measurements of high concentrations of iodine above a Laminaria Digitata seaweed bed

    Science.gov (United States)

    Ball, Stephen; Adams, Thomas; Leblanc, Catherine; Potin, Philippe

    2013-04-01

    -distant seaweeds whose emissions are better-mixed into the atmosphere. The peak I2 concentrations observed here are three to five times greater than the maximum amounts recorded above/closeby laminaria beds in previous studies: 350 pptv max in O Grove, Galicia, Spain (Mahajan et al., ACP, 11, 2545, 2011), and 302 and 547 pptv max at Mweenish Bay, near Mace Head, County Galway, Ireland (Huang et al., GRL, 37, L03803, 2010; ACPD, 12, 25915, 2012). In part, the larger peak concentrations seen here are a consequence of deploying a fast response instrument very close to the source, enabling the emission's high temporal variability to be captured with fewer averaging effects. Nevertheless, the I2 concentrations averaged over the 30 minute period around the tidal minimum were still typically 750 pptv, suggesting laminaria beds are even stronger emitters of I2 into coastal atmospheres than previously thought. Some implications for such high concentrations of iodine for the local atmospheric chemistry are considered. We acknowledge support from the European Community FP7 project "ASSEMBLE", grant 227799.

  8. Imaging diagnosis--duodenobiliary reflux of barium sulfate during esophagogastrography in a dog.

    Science.gov (United States)

    Shaikh, Layla; Sharma, Ajay; Secrest, Scott

    2015-01-01

    A 4-year-old Australian cattle dog presented for regurgitation, 2 months after duodenal resection and anastomosis for a perforated duodenal ulcer. Duodenobiliary reflux of barium sulfate suspension was detected during fluoroscopic esophagogastrography. Follow-up radiography 2 hours later demonstrated persistence of the barium in the gallbladder and biliary tree. Ultrasonography showed an open sphincter of Oddi but no other morphological abnormalities with the gallbladder or biliary system. No side effects or bloodwork abnormalities were noted. This is the first case report of duodenobiliary reflux of barium in a dog. The pathophysiology of this phenomenon and its incidence and significance in human medicine are discussed. © 2014 American College of Veterinary Radiology.

  9. Improved thermal stability and wettability behavior of thermoplastic polyurethane / barium metaborate composites

    Energy Technology Data Exchange (ETDEWEB)

    Baştürka, Emre; Madakbaş, Seyfullah; Kahraman, Memet Vezir, E-mail: smadakbas@marmara.edu.tr [Department of Chemistry, Marmara University, Istanbul (Turkey)

    2016-03-15

    In this paper, it was targeted to the enhance thermal stability and wettability behavior of thermoplastic polyurethane (TPU) by adding barium metaborate. TPU-Barium metaborate composites were prepared by adding various proportions of barium metaborate to TPU. The chemical structures of the composites were characterised by fourier transform infrared spectroscopy (FTIR) and X-ray diffraction (XRD) analysis. All prepared composites have extremely high Tg and thermal stability as determined from DSC and TGA analysis. All composite materials have the Tg ranging from 15 to 35 °C. The surface morphologies of the composites were investigated by a scanning electron microscopy. Mechanical properties of the samples were characterized with stress-strain test. Hydrophobicity of the samples was determined by the contact angle measurements. The obtained results proved that thermal, hydrophobic and mechanical properties were improved. (author)

  10. Prompt ionization in the CRIT II barium releases. [Critical Ionization Tests

    Science.gov (United States)

    Torbert, R. B.; Kletzing, C. A.; Liou, K.; Rau, D.

    1992-01-01

    Observations of electron and ion distributions inside a fast neutral barium jet in the ionosphere show significant fluxes within 4 km of release, presumably related to beam plasma instability processes involved in the Critical Ionization Velocity (CIV) effect. Electron fluxes exceeding 5 x 10 exp 12/sq cm-str-sec-keV were responsible for ionizing both the streaming barium and ambient oxygen. Resulting ion fluxes seem to be consistent with 1-2 percent ionization of the fast barium, as reported by optical observations, although the extended spatial distribution of the optically observed ions is difficult to reconcile with the in situ observations. When the perpendicular velocity of the neutrals falls below critical values, these processes shut off. Although these observations resemble the earlier Porcupine experimental results (Haerendel, 1982), theoretical understanding of the differences between these data and that of earlier negative experiments is still lacking.

  11. Spectroscopy of Ba and Ba$^+$ deposits in solid xenon for barium tagging in nEXO

    CERN Document Server

    Mong, B; Walton, T; Chambers, C; Craycraft, A; Benitez-Medina, C; Hall, K; Fairbank, W; Albert, J B; Auty, D J; Barbeau, P S; Basque, V; Beck, D; Breidenbach, M; Brunner, T; Cao, G F; Cleveland, B; Coon, M; Daniels, T; Daugherty, S J; DeVoe, R; Didberidze, T; Dilling, J; Dolinski, M J; Dunford, M; Fabris, L; Farine, J; Feldmeier, W; Fierlinger, P; Fudenberg, D; Giroux, G; Gornea, R; Graham, K; Gratta, G; Heffner, M; Hughes, M; Jiang, X S; Johnson, T N; Johnston, S; Karelin, A; Kaufman, L J; Killick, R; Koffas, T; Kravitz, S; Krucken, R; Kuchenkov, A; Kumar, K S; Leonard, D S; Licciardi, C; Lin, Y H; Ling, J; MacLellan, R; Marino, M G; Moore, D; Odian, A; Ostrovskiy, I; Piepke, A; Pocar, A; Retiere, F; Rowson, P C; Rozo, M P; Schubert, A; Sinclair, D; Smith, E; Stekhanov, V; Tarka, M; Tolba, T; Twelker, K; Vuilleumier, J -L; Walton, J; Weber, M; Wen, L J; Wichoski, U; Yang, L; Yen, Y -R; Zhao, Y B

    2014-01-01

    Progress on a method of barium tagging for the nEXO double beta decay experiment is reported. Absorption and emission spectra for deposits of barium atoms and ions in solid xenon matrices are presented. Excitation spectra for prominent emission lines, temperature dependence and bleaching of the fluorescence reveal the existence of different matrix sites. A regular series of sharp lines observed in Ba$^+$ deposits is identified with some type of barium hydride molecule. Lower limits for the fluorescence quantum efficiency of the principal Ba emission transition are reported. Under current conditions, an image of $\\le10^4$ Ba atoms can be obtained. Prospects for imaging single Ba atoms in solid xenon are discussed.

  12. Use of the barium enema in the diagnosis of necrotizing enterocolitis

    Energy Technology Data Exchange (ETDEWEB)

    Uken, P.; Smith, W.; Franken, E.A.; Frey, E.; Sato, Y.; Ellerbroek, C.

    1988-01-01

    Necrotizing enterocolitis (NEC) is associated with considerable morbidity and mortality in infants. The diagnosis relies heavily upon radiographic and clinical features. Failure to accurately diagnose NEC is associated with a risk of complications and death, however overdiagnosis also causes both morbidity and mortality as well as excessive medical costs. This report documents the use of barium enema to evaluate suspected clinical or radiographic NEC in 31 premature infants with ambiguous clinical and radiographic signs. The enema was normal in 26 infants and no treatment for NEC was given. Only one of these infants developed signs of NEC subsequent to the examination. Five infants had radiographic evidence of colitis including small ulcerations, spasm, intramural extravasation of barium and mucosal irregularity. Two of the five positive cases are pathologically documented. The barium enema can represent a significant improvement in the specificity of the diagnosis of NEC. Its greatest value is in the exclusion of NEC in ambiguous cases.

  13. Unintentional i.v. injection of barium sulfate in a child.

    Science.gov (United States)

    Soghoian, Samara; Hoffman, Robert S; Nelson, Lewis

    2010-05-01

    A case of barium sulfate injection into the superior vena cava during an upper gastrointestinal series (UGIS) in which the patient's central venous line (CVL) was mistaken for her gastrostomy tube is reported. A 17-month-old girl was brought to the fluoroscopy suite to undergo a UGIS with barium sulfate contrast. Her medical history included premature birth and short-gut syndrome after a bowel resection for necrotizing enterocolitis and gastroschisis. She had been treated for multiple bouts of sepsis and was currently receiving antibiotic therapy at home via a CVL. She was admitted to the hospital for replacement of her CVL. In the hospital, the patient developed a diarrheal illness with projectile vomiting, prompting the UGIS. In the fluoroscopy suite, approximately 3 mL of barium sulfate was injected into the patient's CVL, which was misidentified as her gastrostomy tube. The error was recognized when the first video fluoroscopic image revealed barium in the patient's right atrium, and 10 mL of blood containing a thick, chalky, whitish-pink suspension was immediately aspirated from the CVL. Peripheral venous access was established, and the CVL was removed. The patient vomited three times and developed rigors 30 minutes later. That evening, she developed a fever, which was treated with acetaminophen and a course of broad-spectrum antibiotics. Subsequent radiographs of the patient's chest failed to show any residual barium, and no respiratory distress developed. The patient was discharged in stable condition four days later. A 17-month-old girl inadvertently received barium sulfate by i.v. injection through a CVL that was mistaken for the patient's gastrostomy tube.

  14. Strontium and barium isotopes in presolar silicon carbide grains measured with CHILI-two types of X grains

    Science.gov (United States)

    Stephan, Thomas; Trappitsch, Reto; Davis, Andrew M.; Pellin, Michael J.; Rost, Detlef; Savina, Michael R.; Jadhav, Manavi; Kelly, Christopher H.; Gyngard, Frank; Hoppe, Peter; Dauphas, Nicolas

    2018-01-01

    We used CHILI, the Chicago Instrument for Laser Ionization, a new resonance ionization mass spectrometer developed for isotopic analysis of small samples, to analyze strontium, zirconium, and barium isotopes in 22 presolar silicon carbide grains. Twenty of the grains showed detectable strontium and barium, but none of the grains had enough zirconium to be detected with CHILI. Nine grains were excluded from further consideration since they showed very little signals (barium. Among the 11 remaining grains, we found three X grains. The discovery of three supernova grains among only 22 grains was fortuitous, because only ∼1% of presolar silicon carbide grains are type X, but was confirmed by silicon isotopic measurements of grain residues with NanoSIMS. While one of the X grains showed strontium and barium isotope patterns expected for supernova grains, the two other supernova grains have 87Sr/86Sr barium isotopic composition constrain their individual formation conditions in Type II supernovae.

  15. Batch Cooling Crystallization of Potassium Sulphate from Water Solution

    Directory of Open Access Journals (Sweden)

    Kalšan, M.

    2009-12-01

    Full Text Available Batch cooling crystallization, at the rotation speed of 700 min–1, of an aqueous solution of a potassium sulphate has been investigated on a laboratory scale. The effect of hydrodynamics conditions on the crystallization process were investigated by using different type of impellers. Two types of impellers were investigated; the four-pitched blade impeller which generates axi-al flow and the six-blades Rusthon turbine which generates radial flow. The experiments were performed at four different linear cooling rates in the range from 8-20 °C h–1 for both types of impeller.The influence of the cooling rates on the metastable zone width, the crystallization kinetics and the granulometric properties of the obtained crystals were investigated. The experimental data show that higher cooling rate expands the metastable zone for all the types of impeller (Fig. 2 and influences the crystal size distribution (Fig. 7 and Fig. 8.At low cooling rates, supersaturation was kept at a constant value for a longer period. It resulted in improved conditions for mass transfer and the crystals grew. Bigger crystals were obtained at lower cooling rates (Fig. 7.It is stated that radial flow (Rusthon turbine is particularly inappropriate for the nucleation process, and for crystallization. Nucleation started at a lower temperature and higher supersaturation (Fig. 3. These conditions resulted in a high nucleation’s rate and large number of nucleation centres.Also, the obtained crystals settled on the wall of the reactor, baffles and stirrer. A great part of the obtained crystals was agglomerated. The nucleation order, n and coefficient of nucleation, kn were determined for different cooling rates (Fig. 5a. The nucleation order is higher at radial flow (nucleation started at higher supersaturation. The relation between the rate of concentration drop in a solution and supersaturation has beenapproximated with a power low equation (Fig. 5b. For the used impellers

  16. Biotreatment of Cr(VI) contaminated waters by sulphate reducing bacteria fed with ethanol

    Energy Technology Data Exchange (ETDEWEB)

    Pagnanelli, F., E-mail: francesca.pagnanelli@uniroma1.it [Department of Chemistry, Sapienza University of Rome, P.le Aldo Moro 5, 00185 Rome (Italy); Cruz Viggi, C., E-mail: carolina.cruzviggi@uniroma1.it [Department of Chemistry, Sapienza University of Rome, P.le Aldo Moro 5, 00185 Rome (Italy); Cibati, A., E-mail: alessio.cibati@uniroma1.it [Department of Chemistry, Sapienza University of Rome, P.le Aldo Moro 5, 00185 Rome (Italy); Uccelletti, D., E-mail: daniela.uccelletti@uniroma1.it [Department of Biology and Biotechnology, Sapienza University of Rome, P.le A. Moro 5, 00185 Rome (Italy); Toro, L., E-mail: luigi.toro@uniroma1.it [Department of Chemistry, Sapienza University of Rome, P.le Aldo Moro 5, 00185 Rome (Italy); Palleschi, C., E-mail: claudio.palleschi@uniroma1.it [Department of Biology and Biotechnology, Sapienza University of Rome, P.le A. Moro 5, 00185 Rome (Italy)

    2012-01-15

    Highlights: Black-Right-Pointing-Pointer Use of ethanol as electron donor for sulphate-reducing bacteria for the treatment of Cr(VI). Black-Right-Pointing-Pointer Isolation of contribution in Cr removal (adsorption vs. bioprecipitation). Black-Right-Pointing-Pointer Bioassessment of the process effectiveness by ecotoxicological in vivo tests using C. elegans. - Abstract: Biological treatment of Cr(VI) contaminated waters was performed in fixed bed reactors inoculated with SRB (sulphate-reducing bacteria) growing on ethanol. Treatment efficiency was evaluated by checking chemical abatement of Cr(VI) and by ecotoxicological tests using the nematode Caenorhabditis elegans. A preliminary comparison between ethanol and lactate was performed, denoting that using ethanol, the same values of final sulphate abatement were obtained. In addition ethanol showed to be a substrate more competitive than lactate in kinetic terms. Fixed bed column reactors were continuously fed with a solution containing sulphates (3 g L{sup -1}), ethanol (1.5 g L{sup -1}) and Cr(VI) (50 mg L{sup -1}). At steady state the column inoculated with SRB removed 65 {+-} 5% of sulphate and 95 {+-} 5% of chromium. Bioactive removal mechanisms predominated over biosorption. Diminution of Cr(VI) toxicity was assessed by using the nematode C. elegans as a test organism showing that the survival of nematodes was 20% in the presence of the untreated influent and raised up to 53% when the nematodes were exposed to the treated effluent.

  17. Sulphate-bicarbonate mineral waters in the treatment of biliary and digestive tract diseases.

    Science.gov (United States)

    Fraioli, A; Menunni, G; Petraccia, L; Fontana, M; Nocchi, S; Grassi, M

    2010-01-01

    The authors point out the therapeutic properties of sulphate-bicarbonate mineral waters. After summarizing the general mechanism of action of mineral waters, the main indications of such waters in thermal treatment are examined including: biliary sand, biliary dyskinesia, functional dyspepsia, irritable colon, chronic primitive constipation. The dysfunctions of biliary and digestive tracts are growing, mainly in the affluent world, because of the increase for stress, dietary habits, modern life style. Now they affect from 2,4% of general population to 7% of men and 20% of women, according to different studies. Mineral waters can improve symptoms and care some physiopathological underlying mechanisms. Authors stress the efficacy of sulphate-bicarbonate mineral waters in the therapy of biliary dyskinesias, namely gallbladder hypokinesia and Oddi's sphincter spasm, caused by their content in SO4 = anion and Mg++ cation and related effects on paracrine-endocrine gastrointestinal system. In addition, they report the effects of sulphate-bicarbonate mineral waters in the lithogenic bile (sand bile), because of their diluting and washing activity. Among the sulphate-bicarbonate mineral waters, the Authors outline the well-documented therapeutic activity of Acqua Santa and Fucoli of Chianciano Terme. Acqua Santa has stimulating effect on cholecystis's motility, as proved by controlled clinical trials. Finally, the therapeutic use of sulphate-bicarbonate mineral water is discussed in functional dyspepsia, chronic primitive constipation and irritable bowel syndrome.

  18. Evaluating portland cement concrete degradation by sulphate exposure through artificial neural networks modeling

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, Douglas Nunes de; Bourguignon, Lucas Gabriel Garcia; Tolentino, Evandro, E-mail: tolentino@timoteo.cefetmg.br [Centro Federal de Educacao Tecnologica de Minas Gerais (CEFET-MG), Timoteo, MG (Brazil); Costa, Rodrigo Moyses, E-mail: rodrigo@moyses.com.br [Universidade de Itauna, Itauna, MG (Brazil); Tello, Cledola Cassia Oliveira de, E-mail: tellocc@cdtn.br [Centro de Desenvolvimento da Tecnologia Nucelar (CDTN/CNEN-MG), Belo Horizonte, MG (Brazil)

    2015-07-01

    A concrete is durable if it has accomplished the desired service life in the environment in which it is exposed. The durability of concrete materials can be limited as a result of adverse performance of its cement-paste matrix or aggregate constituents under either chemical or physical attack. Among other aggressive chemical exposures, the sulphate attack is an important concern. Water, soils and gases, which contain sulphate, represent a potential threat to the durability of concrete structures. Sulphate attack in concrete leads to the conversion of the hydration products of cement to ettringite, gypsum, and other phases, and also it leads to the destabilization of the primary strength generating calcium silicate hydrate (C-S-H) gel. The formation of ettringite and gypsum is common in cementitious systems exposed to most types of sulphate solutions. The present work presents the application of the neural networks for estimating deterioration of various concrete mixtures due to exposure to sulphate solutions. A neural networks model was constructed, trained and tested using the available database. In general, artificial neural networks could be successfully used in function approximation problems in order to approach the data generation function. Once data generation function is known, artificial neural network structure is tested using data not presented to the network during training. This paper is intent to provide the technical requirements related to the production of a durable concrete to be used in the structures of the Brazilian near-surface repository of radioactive wastes. (author)

  19. Risk minimisation of FGD gypsum leachates by incorporation of aluminium sulphate.

    Science.gov (United States)

    Alvarez-Ayuso, E; Querol, X; Ballesteros, J C; Giménez, A

    2008-11-15

    The incorporation of aluminium sulphate to (flue gas desulphurisation) FGD gypsum before its disposal was investigated as a way to minimise the risk supposed by the high fluoride content of its leachates. Using a bath method the kinetic and equilibrium processes of fluoride removal by aluminium sulphate were studied at fluoride/aluminium molar concentration (F/Al) ratios in the range 1.75 10(-2)-1.75 under the pH conditions (about 6.5) of FGD gypsum leachates. It was found that fluoride removal was a very fast process at any of the (F/Al) ratios subject of study, with equilibrium attained within the first 15 min of interaction. High decreases in solution fluoride concentrations (50-80%) were found at the equilibrium state. The use of aluminium sulphate in the stabilization of FGD gypsum proved to greatly decrease its fluoride leachable content (in the range 20-90% for aluminium sulphate doses of 0.1-5%, as determined by the European standard EN 12457-4). Such fluoride leaching minimisation assures the characterization of this by-product as a waste acceptable at landfills for non-hazardous wastes according to the Council Decision 2003/33/EC on waste disposal. Furthermore, as derived from column leaching studies, the proposed stabilization system showed to be highly effective in simulated conditions of disposal, displaying fluoride leaching reduction values about 55 and 80% for aluminium sulphate added amounts of 1 and 2%, respectively.

  20. Sulphate reducing activity detected in soil samples from Antarctica, Ecology Glacier Forefield, King George Island.

    Science.gov (United States)

    Wolicka, Dorota; Zdanowski, Marek K; Żmuda-Baranowska, Magdalena J; Poszytek, Anna; Grzesiak, Jakub

    2014-01-01

    We determined sulphate-reducing activities in media inoculated with soils and with kettle lake sediments in order to investigate their potential in geomicrobiological processes in low-temperature, terrestrial maritime Antarctic habitats. Soil and sediment samples were collected in a glacier valley abandoned by Ecology Glacier during the last 30 years: from a new formed kettle lake sediment and forefield soil derived from ground moraine. Inoculated with these samples, liquid Postgate C and minimal media supplemented with various carbon sources as electron donors were incubated for 8 weeks at 4°C. High rates of sulphate reduction were observed only in media inoculated with soil. No sulphate reduction was detected in media inoculated with kettle lake sediments. In soil samples culture media calcite and elemental sulphur deposits were observed, demonstrating that sulphate-reducing activity is associated with a potential to mineral formation in cold environments. Cells observed on scanning microscopy (SEM) micrographs of post-culture-soil deposits could be responsible for sulphate-reducing activity.

  1. Electron quantum yields from a barium photocathode illuminated with polarized light

    Energy Technology Data Exchange (ETDEWEB)

    Conde, M.E.; Chattopadhyay, S.; Kim, K.J.; Kwon, S.I.; Leung, K.N.; Young, A.T.

    1993-05-01

    Photoemission measurements with a barium photo-cathode and a nitrogen laser are reported. The cathode is prepared by evaporating barium onto a copper disc. Radiation from a nitrogen laser (337 nm, 10 ns) is polarized and strikes the cathode surface at variable angles. An electron quantum yield as high as 1 {times} 10{sup {minus}3} is observed. The dependence of the quantum yield on the beam polarization and angle of incidence is investigated. The results indicate that higher quantum yields are achieved when the laser beam is incident at an angle of {approximately}55{degree} and is polarized perpendicular to the plane of incidence.

  2. Spectral phonon scattering effects on the thermal conductivity of nano-grained barium titanate

    Science.gov (United States)

    Donovan, Brian F.; Foley, Brian M.; Ihlefeld, Jon F.; Maria, Jon-Paul; Hopkins, Patrick E.

    2014-08-01

    We study the effect of grain size on thermal conductivity of thin film barium titanate over temperatures ranging from 200 to 500 K. We show that the thermal conductivity of Barium Titanate (BaTiO3) decreases with decreasing grain size as a result of increased phonon scattering from grain boundaries. We analyze our results with a model for thermal conductivity that incorporates a spectrum of mean free paths in BaTiO3. In contrast to the common gray mean free path assumption, our findings suggest that the thermal conductivity of complex oxide perovskites is driven by a spectrum of phonons with varying mean free paths.

  3. Synthesis and properties of barium titanate solid solution thin films deposited on copper substrates

    Science.gov (United States)

    Ihlefeld, Jon Fredrick

    Barium titanate thin films were deposited via chemical solution deposition using a hybrid-chelate chemistry directly on copper foil substrates. A process was developed to crystallize and densify the ferroelectric films at 900°C by using a reductive atmosphere containing nitrogen, hydrogen, water vapor, and oxygen impurities such that film constituents were oxidized to form barium titanate and the foil substrate remained metallic. The crystallized films are polycrystalline with equiaxed morphology and average grain diameters in excess of 100 mn. The dielectric properties exhibit permittivities in excess of 1800 at room temperature and zero bias with tunabilites of greater than 90% and high field loss tangents of less than 1%. The phase transition temperature and temperature coefficient of capacitance modified by partially substituting zirconium, hafnium, and tin for titanium. The resulting films were single phase and the phase transition shifts were consistent with bulk materials. A reduction in permittivity was observed for increasing substituent level and was attributed to a reduction in grain size for both barium titanate zirconate and barium titanate hafnate. Processing conditions were chosen to stabilize Sn2+ during the firing process in an attempt to flux the system and increase grain size. The barium titanate stannate films had less reduction in grain size per substituent level than either zirconium or hafnium, however a similar reduction in permittivity was observed. The diminished dielectric response was explained by a defect reaction involving divalent tin and oxygen vacancies that quenched the extrinsic domain response to the dielectric constant. Barium borate fluxes were used to improve densification and crystallinity. Barium borate additions between 0 and 3% uniformly increased grain size and density, while levels greater than 3% resulted in anomalous grain growth. Films with exaggerated grains show tetragonal peak splitting in the X-ray diffraction

  4. Mapping of strain mechanisms in barium titanate by three-dimensional X-ray diffraction

    DEFF Research Database (Denmark)

    Majkut, Marta

    This thesis presents an in-situ three-dimensional study of the grain-scale response of a prototypical piezoelectric ceramic, barium titanate (BT), to an exernally applied electric field. Piezoceramics take advantage of the coupling of electrical and mechanical energies for use in sensors and actu......This thesis presents an in-situ three-dimensional study of the grain-scale response of a prototypical piezoelectric ceramic, barium titanate (BT), to an exernally applied electric field. Piezoceramics take advantage of the coupling of electrical and mechanical energies for use in sensors...

  5. The structural properties of barium cobalt hexaferrite powder prepared by a simple heat treatment method

    Energy Technology Data Exchange (ETDEWEB)

    Chauhan, Chetna, E-mail: chetna.chauhan@nirmauni.ac.in [Electrical Engineering Department, Institute of Technology, Nirma University, Ahmedabad-382 481. Gujarat. India (India); Jotania, Rajshree, E-mail: rbjotania@gmail.com [Department of Physics, University School of Sciences, Gujarat University, Ahmeabad – 380009. Gujarat. India (India)

    2016-05-06

    The W-type barium hexaferrite was prepared using a simple heat treatment method. The precursor was calcinated at 650°C for 3 hours and then slowly cooled to room temperature in order to obtain barium cobalt hexaferrite powder. The prepared powder was characterised by different experimental techniques like XRD, FTIR and SEM. The X-ray diffractogram of the sample shows W-and M phases. The particle size calculated by Debye Scherrer formula. The FTIR spectra of the sample was taken at room temperature by using KBr pallet method which confirms the formation of hexaferrite phase. The morphological study on the hexaferrite powder was carried out by SEM analysis.

  6. Physical Property of Magnesium Doped Barium Hexaferrite Particles By Citrate Precursor Route In Presence Of Surfactants

    Science.gov (United States)

    Paladiya, Snehal; Chauhan, C. C.; Jotania, R. B.

    2010-12-01

    M-type Barium Magnesium hexaferrite with the composition BaMg2Fe10O19 was successfully prepared with and without surfactant by using a citrate precursor route. The obtained precursors were calcined at various temperatures. The crystalline structure, phase analysis and particle size were investigated by using X-ray diffraction (XRD), Fourier Transform infrared spectroscopy (FTIR), Scanning Electron Microscopy (SEM) techniques. It is observed that the surfactant addition controls the microstructure of the formed Barium Magnesium hexaferrite particles and the type of surfactant plays a crucial role in deciding the morphology of particles.

  7. The structural properties of barium cobalt hexaferrite powder prepared by a simple heat treatment method

    Science.gov (United States)

    Chauhan, Chetna; Jotania, Rajshree

    2016-05-01

    The W-type barium hexaferrite was prepared using a simple heat treatment method. The precursor was calcinated at 650°C for 3 hours and then slowly cooled to room temperature in order to obtain barium cobalt hexaferrite powder. The prepared powder was characterised by different experimental techniques like XRD, FTIR and SEM. The X-ray diffractogram of the sample shows W-and M phases. The particle size calculated by Debye Scherrer formula. The FTIR spectra of the sample was taken at room temperature by using KBr pallet method which confirms the formation of hexaferrite phase. The morphological study on the hexaferrite powder was carried out by SEM analysis.

  8. Chemical composition of nanomodified composite binder with nano- and microsized barium silicate

    Directory of Open Access Journals (Sweden)

    KOROLEV Evgenij Valerjevich

    2014-08-01

    Full Text Available There are several possibilities to improve cement-based binders. In particular, many properties of cement stone can be enhanced by means of micro- and nanoscale modification. In a number of previous works we had shown that application of barium hydrosilicates leads to such improvement. The present article is devoted to the investigation of the chemical composition of the cement stone which is modified by means of addition of barium hydrosilicates. The modification was performed on different scales: micro- and nanoscale; the results of simultaneous multi-scale modification are also presented. The examination was carried out with help of different modern research techniques – FT IR spectroscopy, differential thermal analysis and X-ray phase analysis. Identification of the new phases and comparative quantitative assessment of their content are performed. It is found that the use of nano- and micro-sized barium hydrosilicates as additives leads to reduction of portlandite by 27...28%; by means of multi-scale modification it is possible to reduce the content of portlandite much more (by 83.3%. Due to addition of nano- and micro-sized barium-based modifiers both the amount of calcium hydrosilicates in reaction products is enlarged, and structure of the mentioned hydrosilicates is changed (the formation of a fine-grained structure of hydration products takes place. Micro-sized barium hydrosilicates are chemically active additives and promote the formation of an additional quantity of calcium hydrosilicates of type CSH (I. The use of nanoscale barium hydrosilicates promotes the formation of CSH (I and CSH (II calcium hydrosilicates, and also both riversidite and xonotlite. As a result of simultaneous application of nano- and micro-sized barium hydrosilicates the content of CSH (II increases. This can be confirmed by means of differential thermal and X-ray analysis. The amount of CSH (I, riversidite and various tobermorites is also increases. It is

  9. Preparation of meta-stable phases of barium titanate by Sol-hydrothermal method

    OpenAIRE

    Mahalakshmi Selvaraj; V. Venkatachalapathy; J. Mayandi; S. Karazhanov; Pearce, J.M.

    2015-01-01

    Two low-cost chemical methods of sol–gel and the hydrothermal process have been strategically combined to fabricate barium titanate (BaTiO3) nanopowders. This method was tested for various synthesis temperatures (100 °C to 250 °C) employing barium dichloride (BaCl2) and titanium tetrachloride (TiCl4) as precursors and sodium hydroxide (NaOH) as mineralizer for synthesis of BaTiO3 nanopowders. The as-prepared BaTiO3 powders were investigated for structural characteristics using x-ray diffracti...

  10. Demonstration of Single Barium Ion Sensitivity for Neutrinoless Double Beta Decay using Single Molecule Fluorescence Imaging

    Energy Technology Data Exchange (ETDEWEB)

    McDonald, A.D.; et al.

    2017-11-13

    A new method to tag the barium daughter in the double beta decay of $^{136}$Xe is reported. Using the technique of single molecule fluorescent imaging (SMFI), individual barium dication (Ba$^{++}$) resolution at a transparent scanning surface has been demonstrated. A single-step photo-bleach confirms the single ion interpretation. Individual ions are localized with super-resolution ($\\sim$2~nm), and detected with a statistical significance of 12.9~$\\sigma$ over backgrounds. This lays the foundation for a new and potentially background-free neutrinoless double beta decay technology, based on SMFI coupled to high pressure xenon gas time projection chambers.

  11. CT-guided percutaneous transthoracic localization of pulmonary nodules prior to video-assisted thoracoscopic surgery using barium suspension.

    Science.gov (United States)

    Lee, Nyoung Keun; Park, Chang Min; Kang, Chang Hyun; Jeon, Yoon Kyung; Choo, Ji Yung; Lee, Hyun-Ju; Goo, Jin Mo

    2012-01-01

    To describe our initial experience with CT-guided percutaneous barium marking for the localization of small pulmonary nodules prior to video-assisted thoracoscopic surgery (VATS). From October 2010 to April 2011, 10 consecutive patients (4 men and 6 women; mean age, 60 years) underwent CT-guided percutaneous barium marking for the localization of 10 small pulmonary nodules (mean size, 7.6 mm; range, 3-14 mm): 6 pure ground-glass nodules, 3 part-solid nodules, and 1 solid nodule. A 140% barium sulfate suspension (mean amount, 0.2 mL; range, 0.15-0.25 mL) was injected around the nodules with a 21-gauge needle. The technical details, surgical findings and pathologic features associated with barium localizations were evaluated. All nodules were marked within 3 mm (mean distance, 1.1 mm; range, 0-3 mm) from the barium ball (mean diameter, 9.6 mm; range, 8-16 mm) formed by the injected barium suspension. Pneumothorax occurred in two cases, for which one needed aspiration. However, there were no other complications. All barium balls were palpable during VATS and visible on intraoperative fluoroscopy, and were completely resected. Both the whitish barium balls and target nodules were identifiable in the frozen specimens. Pathology revealed one invasive adenocarcinoma, five adenocarcinoma-in-situ, two atypical adenomatous hyperplasias, and two benign lesions. In all cases, there were acute inflammations around the barium balls which did not hamper the histological diagnosis of the nodules. CT-guided percutaneous barium marking can be an effective, convenient and safe pre-operative localization procedure prior to VATS, enabling accurate resection and diagnosis of small or faint pulmonary nodules.

  12. IDENTIFYING THE CAUSE OF HIGH CONCENTRATIONS OF TBA IN GROUNDWATER AT GASOLINE SPIILL SITES IN ORANGE COUNTY, CALIFORNIA

    Science.gov (United States)

    Monitoring at gasoline spills in Orange County, California has revealed that TBA (tertiary butyl alcohol) is often present at high concentrations in ground water. To manage the hazard associated with the presence of TBA, staff of the UST Local Oversight Program (LOP) of the Oran...

  13. High Concentration of Heat Pumps in Suburban Areas and Reduction of Their Impact on the Electricity Network

    NARCIS (Netherlands)

    Pruissen, O.P. van; Kamphuis, I.G.

    2011-01-01

    One of the challenges of the near future for a more renewable Dutch electricity infrastructure is the embedding of high concentrations of heat pumps in currently built domestic residences. In the Dutch situation demand of electricity occurs simultaneously with demand of heat, high electricity peak

  14. Starch source in high concentrate rations does not affect rumen pH, histamine and lipopolysaccharide concentrations in dairy cows

    NARCIS (Netherlands)

    Pilachai, R.; Schonewille, J.T.; Thamrongyoswittayakul, C.; Aiumlamai, S.; Wachirapakom, C.; Everts, H.; Hendriks, W.H.

    2012-01-01

    The replacement of ground corn by cassava meal on rumen pH, lipopolysaccharide (LPS) and histamine concentrations under typical Thai feeding conditions (high concentrate diets and rice straw as the sole source of roughage) was investigated. Four rumen-fistulated crossbred Holstein, non-pregnant, dry

  15. Modeling of Hydrodynamics of a Highly Concentrated Granular Medium on the Basis of a Power-Law

    Directory of Open Access Journals (Sweden)

    Shvab Alexander

    2016-01-01

    Full Text Available The paper deals with the movement of the granular medium at a high concentration on the basis of the “power” of the liquid. Based on the original partial slip boundary conditions on the walls of protection obtained with experimental and numerical data to flow in the channel at a flow obstacle.

  16. High-concentration versus titrated oxygen therapy in ST-elevation myocardial infarction: a pilot randomized controlled trial.

    Science.gov (United States)

    Ranchord, Anil M; Argyle, Rachel; Beynon, Rhys; Perrin, Kyle; Sharma, Vishal; Weatherall, Mark; Simmonds, Mark; Heatlie, Grant; Brooks, Nicholas; Beasley, Richard

    2012-02-01

    The optimal approach to oxygen therapy in ST-elevation myocardial infarction (STEMI) is uncertain. A randomized controlled trial was undertaken in which 136 patients presenting with their first STEMI uncomplicated by cardiogenic shock or marked hypoxia were randomized to receive high-concentration (6 L/min via medium concentration mask) or titrated oxygen (to achieve oxygen saturation 93%-96%) for 6 hours after presentation. The main outcome variables were 30-day mortality and infarct size assessed by troponin T level at 72 hours. Secondary outcomes included a meta-analysis of mortality data from this study and previous randomized controlled trials, and infarct size was assessed by magnetic resonance imaging at 4 to 6 weeks. There were 1 of 68 and 2 of 68 deaths in the high-concentration and titrated oxygen groups, respectively; a meta-analysis including these data with those from the 2 previous studies showed an odds ratio for mortality of high-concentration oxygen compared with room air or titrated oxygen of 2.2 (95% CI 0.8-6.0). There was no significant difference between high-concentration versus titrated oxygen in troponin T (ratio of mean levels 0.74, 95% CI 0.50-1.1, P = .14), infarct mass (mean difference -0.8 g, 95% CI -7.6 to 6.1, P = .82), or percent infarct mass (mean difference -0.6%, 95% CI -5.6 to 4.5, P = .83). This study found no evidence of benefit or harm from high-concentration compared with titrated oxygen in initially uncomplicated STEMI. However, our estimates have wide CIs, and as a result, large randomized controlled trials are required to resolve the clinical uncertainty. Copyright © 2012 Mosby, Inc. All rights reserved.

  17. Urine tested positive for ethyl glucuronide and ethyl sulphate after the consumption of "non-alcoholic" beer.

    Science.gov (United States)

    Thierauf, Annette; Gnann, Heike; Wohlfarth, Ariane; Auwärter, Volker; Perdekamp, Markus Grosse; Buttler, Klaus-Juergen; Wurst, Friedrich M; Weinmann, Wolfgang

    2010-10-10

    In abstinence maintenance programs, for reissuing the driving licence and in workplace monitoring programs abstinence from ethanol and its proof are demanded. Various monitoring programs that mainly use ethyl glucuronide (EtG) as alcohol consumption marker have been established. To abstain from ethanol, but not from the taste of alcoholic beverages, in particular non-alcoholic beer has become more and more popular. In Germany, these "alcohol-free" beverages may still have an ethanol content of up to 0.5vol.% without the duty of declaration. Due to severe negative consequences resulting from positive EtG tests, a drinking experiment with 2.5L of non-alcoholic beer per person was performed to address the question of measurable concentrations of the direct metabolites EtG and EtS (ethyl sulphate) in urine and blood. Both alcohol consumption markers - determined by LC-MS/MS - were found in high concentrations: maximum concentrations in urine found in three volunteers were EtG 0.30-0.87mg/L and EtS 0.04-0.07mg/L, i.e., above the often applied cut-off value for the proof of abstinence of 0.1mg EtG/L. In the urine samples of one further volunteer, EtG and EtS concentrations cumulated over-night and reached up to 14.1mg/L EtG and 16.1mg/L EtS in the next morning's urine. Ethanol concentrations in blood and urine samples were negative (determined by HS-GC-FID and by an ADH-based method). Copyright © 2010. Published by Elsevier Ireland Ltd.

  18. Role of oral zinc sulphate in warts-a placebo controlled,single-blinded study

    Directory of Open Access Journals (Sweden)

    Iffat Hassan

    2013-01-01

    Full Text Available Verrucae (synonym: warts are one of the most common viral infections of humans in which the most frequently used modalities of treatment involve destruction of the affected area, which does not prevent recurrences and often results in scarring. In the present study oral zinc sulphate, an immunomodulator was evaluated as a treatment modality for warts. A placebo-controlled, single-blinded study was conducted on one hundred OPD patients with various types of verrucae. Fifty patients were put on oral zinc sulphate at dose of 5mg/kg for six weeks, while an equal number of patients received placebo for the same duration. In the patients who received oral zinc sulphate, 60.97% showed complete response at the end of six weeks in comparison to 6.45% partial response in the placebo group. The resolution of the lesions occurred with restoration of normal epidermal texture with transient alteration in pigmentation.

  19. [Concordance between the zinc sulphate flotation and centrifugal sedimentation methods for the diagnosis of intestinal parasites].

    Science.gov (United States)

    Inês, Elizabete De Jesus; Pacheco, Flavia Thamiris Figueiredo; Pinto, Milena Carneiro; Mendes, Patrícia Silva de Almeida; Da Costa-Ribeiro, Hugo; Soares, Neci Matos; Teixeira, Márcia Cristina Aquino

    2016-12-01

    The diagnosis of intestinal parasitic infections depends on the parasite load, the specific gravity density of the parasite eggs, oocysts or cysts, and the density and viscosity of flotation or sedimentation medium where faeces are processed. To evaluate the concordance between zinc sulphate flotation and centrifugal sedimentation in the recovery of parasites in faecal samples of children. Faecal samples of 330 children from day care centers were evaluated by zinc sulphate flotation and centrifugal sedimentation techniques. The frequencies of detection of parasites by each method were determined and the agreement between the diagnostic techniques was evaluated using the kappa index, with 95% confidence intervals. The faecal flotation in zinc sulphate diagnosed significantly more cases of Trichuris trichiura infection when compared to centrifugal sedimentation (39/330; 11.8% vs. 13/330; 3.9%, psedimentation process.

  20. Uptake of /sup 35/S sulphate by Xenopus cartilage. The influence of growth hormone and prolactin

    Energy Technology Data Exchange (ETDEWEB)

    Ishii, Takehisa; Kikuyama, Sakae (Waseda Univ., Tokyo (Japan))

    1984-08-01

    Hypohysectomized juvenile Xenopus were injected with growth hormone (GH) or prolactin (PRL) of either ovine or bullfrog origin. The growth promoting activity of these hormones was measured by monitoring the uptake of /sup 35/S sulphate by the xiphisternal cartilage in vitro. Analysis of the labelled cartilage revealed that the acid mucopolysaccharide fraction contained about 60-80 % of the label most of which was incorporated into chondroitin sulphates. All of the hormones tested enhaced the /sup 35/S sulphate uptake dose-dependently. Among them bullfrog GH was most effective, then followed ovine GH and ovine PRL. Bullfrog PRL was far less effective than other three. The sensitive assay for frog GH developed in the present experiment may be applicable to the assay for somatomedin-like activity and contribute to the analysis of the mode of action of GH in amphibians.