WorldWideScience

Sample records for high-btu coal gasification

  1. High-Btu coal gasification processes

    Energy Technology Data Exchange (ETDEWEB)

    Blazek, C.F.; Baker, N.R.; Tison, R.R.

    1979-01-01

    This evaluation provides estimates of performance and cost data for advanced technology, high-Btu, coal gasification facilities. The six processes discussed reflect the current state-of-the-art development. Because no large commercial gasification plants have yet been built in the United States, the information presented here is based only on pilot-plant experience. Performance characteristics that were investigated include unit efficiencies, product output, and pollution aspects. Total installed plant costs and operating costs are tabulated for the various processes. The information supplied here will assist in selecting energy conversion units for an Integrated Community Energy System (ICES).

  2. Biological removal of organic constituents in quench waters from high-Btu coal-gasification pilot plants

    Energy Technology Data Exchange (ETDEWEB)

    Stamoudis, V C; Luthy, R G

    1980-02-01

    Studies were initiated to assess the efficiency of bench-scale, activated-sludge treatment for removal of organic constituents from coal-gasification process effluents. Samples of pilot-plant, raw-gas quench waters were obtained from the HYGAS process of the Institute of Gas Technology and from the slagging, fixed-bed (SFB) process of the Grand Forks Energy Technology Center. The types of coal employed were Bituminous Illinois No. 6 for the HYGAS and Indian Head lignite for the SFB process. These pilot-plant quench waters, while not strictly representative of commercial condensates, were considered useful to evaluate the efficiency of biological oxidation for the removal of organics. Biological-reactor influent and effluent samples were extracted using a methylene chloride pH-fractionation method into acid, base, and neutral fractions, which were analyzed by capillary-column gas-chromatography/mass-spectrometry. Influent acid fractions of both HYGAS and SFB condensates showed that nearly 99% of extractable and chromatographable organic material comprised phenol and alkylated phenols. Activated-sludge treatment removed these compounds almost completely. Removal efficiency of base-fraction organics was generally good, except for certain alkylated pyridines. Removal of neutral-fraction organics was also good, except for certain alkylated benzenes, certain polycyclic aromatic hydrocarbons, and certain cycloalkanes and cycloalkenes, especially at low influent concentrations.

  3. Coal gasification. Quarterly report, April--June 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. A number of the processes for converting coal to high Btu and to low Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  4. Considerations on coal gasification

    Science.gov (United States)

    Franzen, J. E.

    1978-01-01

    Commercial processes for the gasification of coal with oxygen are discussed. The Koppers-Totzek process for the gasification of coal dust entrained in a stream of gasifying agents is described in particular detail. The outlook for future applications of coal gasification is presented.

  5. Coal gasification. Quarterly report, January--March 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-12-01

    High-Btu natural gas has a heating value of 950 to 1,000 Btu per standard cubic foot, is composed essentially of methane, and contains virtually no sulfur, carbon monoxide, or free hydrogen. The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. A number of the processes for converting coal to high Btu and to low Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  6. Coal gasification. Quarterly report, April-June 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-04-01

    In DOE's program for the conversion of coal to gaseous fuels both high-and low-Btu gasification processes are being developed. High-Btu gas can be distributed economically to consumers in the same pipeline systems now used to carry natural gas. Low-Btu gas, the cheapest of the gaseous fuels produced from coal, can be used economically only on site, either for electric power generation or by industrial and petrochemical plants. High-Btu natural gas has a heating value of 950 to 1000 Btu per standard cubic foot, is composed essentially of methane, and contains virtually no sulfur, carbon monoxide, or free hydrogen. The conversion of coal to High-Btu gas requires a chemical and physical transformation of solid coal. Coals have widely differing chemical and physical properties, depending on where they are mined, and are difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, DOE, together with the American Gas Association (AGA), is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, each of the processes under development have unique characteristics. A number of the processes for converting coal to high-Btu gas have reached the pilot plant Low-Btu gas, with a heating value of up to 350 Btu per standard cubic foot, is an economical fuel for industrial use as well as for power generation in combined gas-steam turbine power cycles. Because different low-Btu gasification processes are optimum for converting different types of coal, and because of the need to provide commercially acceptable processes at the earliest possible date, DOE is sponsoring the concurrent development of several basic types of gasifiers (fixed-bed, fluidized-bed, and entrained-flow).

  7. Coal gasification. Quarterly report, July--September 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-02-01

    The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. However, because coal has widely differing chemical and physical properties, depending on where it is mined, it is difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, ERDA, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, the processes under development have unique characteristics. There are, for example, important differences in reactor configurations and methods of supplying heat for gasification. Moreover, because these processes require high temperatures and some require high pressures, temperature-resistant alloys and new pressure vessels must be developed to obtain reliable performance. A number of the processes for converting coal to high-Btu and to low-Btu gas have reached the pilot plant stage. The responsibility for designing, constructing and operating each of these pilot plants is defined and progress on each during the quarter is described briefly. The accumulation of data for a coal gasification manual and the development of mathematical models of coal gasification processes are reported briefly. (LTN)

  8. Integrated coal gasification combined cycle

    Science.gov (United States)

    Richards, P. C.; Wijffels, J.-B.; Zuideveld, P. L.

    Features of the integrated coal gasification combined cycle power plants are described against the backdrop of the development and first commercial application of the shell coal gasification process. Focus is on the efficiency and excellent environmental performance of the integrated coal gasification combined power plants. Current IGCC projects are given together with an outline of some of the options for integrating coal gasification with combined cycles and also other applications of synthesis gas.

  9. Coal gasification. Quarterly report, October-December 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-09-01

    DOE's program for the conversion of coal to gaseous fuels was started by two of its predecessor agencies: the Office of Coal Research (OCR) and ERDA. The US Bureau of Mines, Department of Interior, had previously done research in the 1930's. Both high- and low-Btu gasification processes are being developed. High-Btu gas can be distributed economically to consumers in the same pipeline systems now used to carry natural gas. Low-Btu gas, the cheapest of the gaseous fuels produced from coal, can be used economically only on site, either for electric power generation or by industrial and petrochemical plants. The conversion of coal to high-Btu gas requires a chemical and physical transformation of solid coal. Coals have widely differing chemical and physical properties depending on where they are mined, and are difficult to process. Therefore, to develop the most suitable techniques for gasifying coal, DOE, together with the American Gas Association (AGA), is sponsoring the development of several conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, each of the processes under development have unique characteristics. There are, for example, important differences in reactor configurations and methods of supplying heat for gasification. Moreover, because these processes require high temperatures, because some require high pressures, and because all produce corrosive and chemically-active gases, resistant alloys and new pressure vessels must be developed to obtain reliable performance. A number of the processes for converting coal to high-Btu gas have reached the pilot plant stage. Laboratory research is also continuing in order to develop data for verifying the feasibility of each specific process and for supporting the operation of each plant. Responsibility for designing, constructing, and operating these pilot plants is contracted to individual companies. Each process is described briefly.

  10. Coal gasification. Quarterly report, July-September 1978

    Energy Technology Data Exchange (ETDEWEB)

    1979-05-01

    To develop the most suitable techniques for gasifying coal, DOE, together with the American Gas Association, is sponsoring the development of several advanced conversion processes. Although the basic coal-gasification chemical reactions are the same for each process, each of the processes under development has unique characteristics. There are, for example, important differences in reactor configurations and in methods of supplying heat for gasification. Moreover, because these processes require high temperatures, because some require high pressures, and because all produce corrosive and chemically-active gases, resistant alloys and new pressure vessels must be developed to obtain reliable performance. A number of processes for making high Btu gas and for making low Btu gas are described with the contractor identification, contract, site, funding, and current progress. Projects on mathematical modeling and preparation of a coal conversion systems technical data book are also described. (LTN)

  11. Underground gasification of coal

    Energy Technology Data Exchange (ETDEWEB)

    Koranda, J.

    1986-11-01

    A brief history is given of research in Czechoslovakia, which took 3 main factors into account: environmental protection, geological situation and need to produce gas for use both within the plant and elsewhere. In order to assess economic viability, model studies were performed on following mines: Podlesice (North Bohemia), Vatovce (South Slovakia), Syrenov (East Moravia), Zukovsky Hrbet (Ostrava-Karvina), Stonovska (Ostrava-Karvina) and Merkur (North Bohemia). Figures given in tabular form show that underground gasification at these sites would be cheaper than importing natural gas. Problems are discussed associated with underground gasification and it is concluded that research must be conducted into drilling techniques, drill design, methods of cutting through coal seam between shafts, underground generator design, methods of gasifying several seams with one shaft and methods of dealing with residual pillars.

  12. The shell coal gasification process

    Energy Technology Data Exchange (ETDEWEB)

    Koenders, L.O.M.; Zuideveld, P.O. [Shell Internationale Petroleum Maatschappij B.V., The Hague (Netherlands)

    1995-12-01

    Future Integrated Coal Gasification Combined Cycle (ICGCC) power plants will have superior environmental performance and efficiency. The Shell Coal Gasification Process (SCGP) is a clean coal technology, which can convert a wide range of coals into clean syngas for high efficiency electricity generation in an ICGCC plant. SCGP flexibility has been demonstrated for high-rank bituminous coals to low rank lignites and petroleum coke, and the process is well suited for combined cycle power generation, resulting in efficiencies of 42 to 46% (LHV), depending on choice of coal and gas turbine efficiency. In the Netherlands, a 250 MWe coal gasification combined cycle plant based on Shell technology has been built by Demkolec, a development partnership of the Dutch Electricity Generating Board (N.V. Sep). The construction of the unit was completed end 1993 and is now followed by start-up and a 3 year demonstration period, after that the plant will be part of the Dutch electricity generating system.

  13. Coal gasification vessel

    Science.gov (United States)

    Loo, Billy W.

    1982-01-01

    A vessel system (10) comprises an outer shell (14) of carbon fibers held in a binder, a coolant circulation mechanism (16) and control mechanism (42) and an inner shell (46) comprised of a refractory material and is of light weight and capable of withstanding the extreme temperature and pressure environment of, for example, a coal gasification process. The control mechanism (42) can be computer controlled and can be used to monitor and modulate the coolant which is provided through the circulation mechanism (16) for cooling and protecting the carbon fiber and outer shell (14). The control mechanism (42) is also used to locate any isolated hot spots which may occur through the local disintegration of the inner refractory shell (46).

  14. Coal gasification and occupational health.

    Science.gov (United States)

    Young, R J; McKay, W J; Evans, J M

    1978-12-01

    Identification and prevention of health effects due to occupational exposures in coal gasification processes requires a basic knowledge of the technological process by which gasification proceeds. This paper presents an overview of the technology and a rational approach to health hazard identification based upon the concept of the unit operation specific micro environment. A final section is devoted to summarizing current research efforts being carried out under the aegis of the National Institute for Occupational Safety and Health.

  15. Apparatus for solar coal gasification

    Science.gov (United States)

    Gregg, D.W.

    Apparatus for using focused solar radiation to gasify coal and other carbonaceous materials is described. Incident solar radiation is focused from an array of heliostats onto a tower-mounted secondary mirror which redirects the focused solar radiation down through a window onto the surface of a vertically-moving bed of coal, or a fluidized bed of coal, contained within a gasification reactor. The reactor is designed to minimize contact between the window and solids in the reactor. Steam introduced into the gasification reactor reacts with the heated coal to produce gas consisting mainly of carbon monoxide and hydrogen, commonly called synthesis gas, which can be converted to methane, methanol, gasoline, and other useful products. One of the novel features of the invention is the generation of process steam at the rear surface of the secondary mirror.

  16. Environmental benefits of underground coal gasification.

    Science.gov (United States)

    Liu, Shu-qin; Liu, Jun-hua; Yu, Li

    2002-04-01

    Environmental benefits of underground coal gasification are evaluated. The results showed that through underground coal gasification, gangue discharge is eliminated, sulfur emission is reduced, and the amount of ash, mercury, and tar discharge are decreased. Moreover, effect of underground gasification on underground water is analyzed and CO2 disposal method is put forward.

  17. Environmental benefits of underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    Environmental benefits of underground coal gasification are evaluated. The results showed that through underground coal gasification,gangue discharge is eliminated, sulfur emission is reduced, and the amount of ash, mercury, and tar discharge are decreased. Moreover, effect of underground gasification on underground water is analyzed and CO2 disposal method is put forward.

  18. Underground gasification of coal pillars

    Energy Technology Data Exchange (ETDEWEB)

    Koranda, J.; Haas, K. (Ustav pro Vyzkum a Vyuziti Paliv, Prague (Czechoslovakia))

    1989-10-01

    Gives details of a feasibility study of underground gasification of the remaining non-extractable pillars at the Merkur coal mine, Tusimice. Briefly describes geological conditions and explains calculation of amount of heat held in coal pillars: seam is on average 11.7 m thick and generator area contains 7,182,300 t of coal with mean ash content of 29.71% and calorific value of 10.49 MJ/kg. Assuming losses of 15%, generator should be able to produce about 70,000 m{sup 3}/h of gas, equal to a lifetime of 20 years for coal pillars at the Merkur mine. Reviews gasification techniques and describes design of underground generator, which is to produce 70,000 m{sup 3}/h of gas at pressure of 0.4-0.45 MPa, temperature 350 C, humidity up to 0.25 kg/m{sup 3}. Describes equipment for compressing, cleaning and cooling gas and construction of access roads for positioning equipment and pipelines. It would not be viable to transport the type of gas produced over long distances; it should be used within the immediate area, e.g. at the Prunerov II power plant 2 km away. Concludes by calculating manpower required to operate gasification scheme (122) and cost benefit of scheme, which should provide gas at 31.1 Crowns per GJ (town gas currently costs 46.4 Crowns per GJ and imported natural gas costs 35.58 Crowns per GJ). 4 refs.

  19. Spectrum of underground coal gasification in Tianjin

    Energy Technology Data Exchange (ETDEWEB)

    Xu Yongsheng; Bai Xiaohong [Tianjin Urban Construction Inst. (China)

    1997-12-31

    A feasibility study on underground coal gasification in Tianjin is conducted and a program for exploitation of these coal reserves with UCG techniques is suggested. Some issues, such as the coal resources in Tianjin, the geological features of the selected for UCG trial, the characteristics of local coal deposits and the coal quality are discussed. A proposal for a combination of the production of coalbed methane and underground coal gas was summarized.

  20. ENCOAL mild coal gasification project public design and construction report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1994-12-01

    This Public Design Report describes the 1000 ton per day ENCOAL mild coal gasification demonstration plant now in operation at the Buckskin Mine near Gillette, Wyoming. The objective of the project is to demonstrate that the proprietary Liquids From Coal (LFC) technology can reliably and economically convert low Btu PRB coal into a superior, high-Btu solid fuel (PDF), and an environmentally attractive low-sulfur liquid fuel (CDL). The Project`s plans also call for the production of sufficient quantities of PDF and CDL to permit utility companies to carry out full scale burn tests. While some process as well as mechanical design was done in 1988, the continuous design effort was started in July 1990. Civil construction was started in October 1990; mechanical erection began in May 1991. Virtually all of the planned design work was completed by July 1991. Most major construction was complete by April 1992 followed by plant testing and commissioning. Plant operation began in late May 1992. This report covers both the detailed design and initial construction aspects of the Project.

  1. Plasma gasification of coal in different oxidants

    Energy Technology Data Exchange (ETDEWEB)

    Matveev, I.B.; Messerle, V.E.; Ustimenko, A.B. [Applied Plasma Technology, Mclean, VA (USA)

    2008-12-15

    Oxidant selection is the highest priority for advanced coal gasification-process development. This paper presents comparative analysis of the Powder River Basin bituminous-coal gasification processes for entrained-flow plasma gasifier. Several oxidants, which might be employed for perspective commercial applications, have been chosen, including air, steam/carbon-dioxide blend, carbon dioxide, steam, steam/air, steam/oxygen, and oxygen. Synthesis gas composition, carbon gasification degree, specific power consumptions, and power efficiency for these processes were determined. The influence of the selected oxidant composition on the gasification-process main characteristics have been investigated.

  2. Underground coal gasification - the acceptable face of coal mining?

    Energy Technology Data Exchange (ETDEWEB)

    Dryburgh, P.

    2009-11-15

    There is growing interest in underground coal gasification, whereby energy is accessed from coal in a cleaner way than traditional combustion methods. The paper looks at the benefits of UCG. 1 fig., 1 photo.

  3. Technology characterization: high Btu gas transmission

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-04-01

    A technology characterization for high Btu gas transmission was prepared. The scope of work was confined to a literature review. The work was divided into four specific areas as follows: (1) a summary of pertinent information from the environmental report of the Great Lakes Gas Company for a 365-mile high pressure pipeline serving American Natural Gas Company's proposed lignite gasification plant in North Dakota; (2) statistical information concerning the operation of the existing United States natural gas transmission pipeline network; (3) a summary of pertinent information from the environmental impact statement of the United States Department of Interior for the proposed 1,619-mile Northern Border Pipeline from Morgan, Montana to Delmont, Pennsylvania; and (4) a summary of pertinent information from the environmental impact statement of the Federal Power Commission for a proposed El Paso Natural Gas Company 418-mile pipeline within the State of Texas which was to be constructed in response to the displacement of natural gas by Liquefied Natural Gas (LNG) importation on the East Coast.

  4. Coal gasification for electric power generation.

    Science.gov (United States)

    Spencer, D F; Gluckman, M J; Alpert, S B

    1982-03-26

    The electric utility industry is being severely affected by rapidly escalating gas and oil prices, restrictive environmental and licensing regulations, and an extremely tight money market. Integrated coal gasification combined cycle (IGCC) power plants have the potential to be economically competitive with present commercial coal-fired power plants while satisfying stringent emission control requirements. The current status of gasification technology is discussed and the critical importance of the 100-megawatt Cool Water IGCC demonstration program is emphasized.

  5. Production of Hydrogen from Underground Coal Gasification

    Science.gov (United States)

    Upadhye, Ravindra S.

    2008-10-07

    A system of obtaining hydrogen from a coal seam by providing a production well that extends into the coal seam; positioning a conduit in the production well leaving an annulus between the conduit and the coal gasification production well, the conduit having a wall; closing the annulus at the lower end to seal it from the coal gasification cavity and the syngas; providing at least a portion of the wall with a bifunctional membrane that serves the dual purpose of providing a catalyzing reaction and selectively allowing hydrogen to pass through the wall and into the annulus; and producing the hydrogen through the annulus.

  6. Power coal plasma gasification. Computation and experiment

    Energy Technology Data Exchange (ETDEWEB)

    N.A. Bastyrev; V.I. Golysh; M.A. Gorokhovski; Yu.E. Karpenko; V.G. Lukiaschenko; V.E. Messerle; A.O. Nagibin; E.F. Osadchaya; S.F. Osadchy; I.G. Stepanov; K.A. Umbetkaliev; A.B. Ustimenko [Combustion Problems Institute, Almaty (Kazakhstan)

    2005-07-01

    Results of complex experimental and numerical investigation of coal plasma gasification in steam and air are presented. To analyse numerically the universal thermodynamic calculation code TERRA was used. The data base of it contains thermodynamic properties for 3500 individual components in temperature interval from 300 to 6000 K. Experiments were fulfilled at an original installation for coal plasma gasification. Nominal power of the plasma gasifier is 100 kW and sum consumption of the reagents is up to 25 kg/h. High integral indexes of the gasification processes were achieved. The numerical and experimental results comparison showed their satisfied agreement. 7 refs., 7 figs., 3 tabs.

  7. WABASH RIVER COAL GASIFICATION REPOWERING PROJECT

    Energy Technology Data Exchange (ETDEWEB)

    Unknown

    2000-09-01

    The close of 1999 marked the completion of the Demonstration Period of the Wabash River Coal Gasification Repowering Project. This Final Report summarizes the engineering and construction phases and details the learning experiences from the first four years of commercial operation that made up the Demonstration Period under Department of Energy (DOE) Cooperative Agreement DE-FC21-92MC29310. This 262 MWe project is a joint venture of Global Energy Inc. (Global acquired Destec Energy's gasification assets from Dynegy in 1999) and PSI Energy, a part of Cinergy Corp. The Joint Venture was formed to participate in the Department of Energy's Clean Coal Technology (CCT) program and to demonstrate coal gasification repowering of an existing generating unit impacted by the Clean Air Act Amendments. The participants jointly developed, separately designed, constructed, own, and are now operating an integrated coal gasification combined-cycle power plant, using Global Energy's E-Gas{trademark} technology (E-Gas{trademark} is the name given to the former Destec technology developed by Dow, Destec, and Dynegy). The E-Gas{trademark} process is integrated with a new General Electric 7FA combustion turbine generator and a heat recovery steam generator in the repowering of a 1950's-vintage Westinghouse steam turbine generator using some pre-existing coal handling facilities, interconnections, and other auxiliaries. The gasification facility utilizes local high sulfur coals (up to 5.9% sulfur) and produces synthetic gas (syngas), sulfur and slag by-products. The Project has the distinction of being the largest single train coal gasification combined-cycle plant in the Western Hemisphere and is the cleanest coal-fired plant of any type in the world. The Project was the first of the CCT integrated gasification combined-cycle (IGCC) projects to achieve commercial operation.

  8. Mathematical Modelling of Coal Gasification Processes

    Science.gov (United States)

    Sundararajan, T.; Raghavan, V.; Ajilkumar, A.; Vijay Kumar, K.

    2017-07-01

    Coal is by far the most commonly employed fuel for electrical power generation around the world. While combustion could be the route for coal utilization for high grade coals, gasification becomes the preferred process for low grade coals having higher composition of volatiles or ash. Indian coals suffer from high ash content-nearly 50% by weight in some cases. Instead of transporting such high ash coals, it is more energy efficient to gasify the coal and transport the product syngas. Integrated Gasification Combined Cycle (IGCC) plants and Underground Gasification of coal have become attractive technologies for the best utilization of high ash coals. Gasification could be achieved in fixed beds, fluidized beds and entrained beds; faster rates of gasification are possible in fluidized beds and entrained flow systems, because of the small particle sizes and higher gas velocities. The media employed for gasification could involve air/oxygen and steam. Use of oxygen will yield relatively higher calorific value syngas because of the absence of nitrogen. Sequestration of the carbon dioxide after the combustion of the syngas is also easier, if oxygen is used for gasification. Addition of steam can increase hydrogen yield in the syngas and thereby increase the calorific value also. Gasification in the presence of suitable catalysts can increase the composition of methane in the product gas. Several competing heterogenous and homogenous reactions occur during coal major heterogenous reaction pathways, while interactions between carbon monoxide, oxygen, hydrogen, water vapour, methane and carbon dioxide result in several simultaneous gas-phase (homogenous) reactions. The overall product composition of the coal gasification process depends on the input reactant composition, particle size and type of gasifier, and pressure and temperature of the gasifier. The use of catalysts can also selectively change the product composition. At IIT Madras, over the last one decade, both

  9. Groundwater Pollution from Underground Coal Gasification

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In situ coal gasification poses a potential environmental risk to groundwater pollution although it depends mainly on local hydrogeological conditions.In our investigation, the possible processes of groundwater pollution originating from underground coal gasification (UCG) were analyzed.Typical pollutants were identified and pollution control measures are proposed.Groundwater pollution is caused by the diffusion and penetration of contaminants generated by underground gasification processes towards surrounding strata and the possible leaching of underground residue by natural groundwater flow after gasification.Typical organic pollutants include phenols, benzene, minor components such as PAHs and heterocyclics.Inorganic pollutants involve cations and anions.The natural groundwater flow after gasification through the seam is attributable to the migration of contaminants, which can be predicted by mathematical modeling.The extent and concentration of the groundwater pollution plume depend primarily on groundwater flow velocity, the degree of dispersion and the adsorption and reactions of the various contaminants.The adsorption function of coal and surrounding strata make a big contribution to the decrease of the contaminants over time and with the distance from the burn cavity.Possible pollution control measures regarding UCG include identifying a permanently, unsuitable zone, setting a hydraulic barrier and pumping contaminated water out for surface disposal.Mitigation measures during gasification processes and groundwater remediation after gasification are also proposed.

  10. Coal properties and system operating parameters for underground coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Yang, L. [China University of Mining & Technology, Xuzhou (China)

    2008-07-01

    Through the model experiment for underground coal gasification, the influence of the properties for gasification agent and gasification methods on underground coal gasifier performance were studied. The results showed that pulsating gasification, to some extent, could improve gas quality, whereas steam gasification led to the production of high heating value gas. Oxygen-enriched air and backflow gasification failed to improve the quality of the outlet gas remarkably, but they could heighten the temperature of the gasifier quickly. According to the experiment data, the longitudinal average gasification rate along the direction of the channel in the gasifying seams was 1.212 m/d, with transverse average gasification rate 0.069 m/d. Experiment indicated that, for the oxygen-enriched steam gasification, when the steam/oxygen ratio was 2:1, gas compositions remained stable, with H{sub 2} + CO content virtually standing between 60% and 70% and O{sub 2} content below 0.5%. The general regularities of the development of the temperature field within the underground gasifier and the reasons for the changes of gas quality were also analyzed. The 'autopneumatolysis' and methanization reaction existing in the underground gasification process were first proposed.

  11. Investigation of plasma-aided bituminous coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Matveev, I.B.; Messerle, V.E.; Ustimenko, A.B. [Applied Plasma Technology, Mclean, VA (United States)

    2009-04-15

    This paper presents thermodynamic and kinetic modeling of plasma-aided bituminous coal gasification. Distributions of concentrations, temperatures, and velocities of the gasification products along the gasifier are calculated. Carbon gasification degree, specific power consumptions, and heat engineering characteristics of synthesis gas at the outlet of the gasifier are determined at plasma air/steam and oxygen/steam gasification of Powder River Basin bituminous coal. Numerical simulation showed that the plasma oxygen/steam gasification of coal is a more preferable process in comparison with the plasma air/steam coal gasification. On the numerical experiments, a plasma vortex fuel reformer is designed.

  12. Fixed-bed gasification research using US coals. Volume 14. Gasification of Kemmerer subbituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) group. This report is the fourteen volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of Kemmerer subbituminous coal, from August 11, 1984 to August 15, 1984. 4 refs., 20 figs., 13 tabs.

  13. Process for fixed bed coal gasification

    Science.gov (United States)

    Sadowski, Richard S.

    1992-01-01

    The combustion of gas produced from the combination of coal pyrolysis and gasification involves combining a combustible gas coal and an oxidant in a pyrolysis chamber and heating the components to a temperature of at least 1600.degree. F. The products of coal pyrolysis are dispersed from the pyrolyzer directly into the high temperature gasification region of a pressure vessel. Steam and air needed for gasification are introduced in the pressure vessel and the materials exiting the pyrolyzer flow down through the pressure vessel by gravity with sufficient residence time to allow any carbon to form carbon monoxide. Gas produced from these reactions are then released from the pressure vessel and ash is disposed of.

  14. Studies of catalytic coal gasification with steam

    Directory of Open Access Journals (Sweden)

    Porada Stanisław

    2016-09-01

    Full Text Available One of the promising processes, belonging to the so-called clean coal technologies, is catalytic coal gasification. The addition of a catalyst results in an increased process rate, in which synthesis gas is obtained. Therefore, the subject of this research was catalytic gasification of low-ranking coal which, due to a high reactivity, meets the requirements for fuels used in the gasification process. Potassium and calcium cations in an amount of 0.85, 1.7 and 3.4% by weight were used as catalytically active substances. Isothermal measurements were performed at 900°C under a pressure of 2 MPa using steam as a gasifying agent. On the basis of kinetic curves, the performance of main gasification products as well as carbon conversion degree were determined. The performed measurements allowed the determination of the type and amount of catalyst that ensure the most efficient gasification process of the coal ‘Piast’ in an atmosphere of steam.

  15. Underground coal gasification. Gasificacion subterranea del carbon

    Energy Technology Data Exchange (ETDEWEB)

    Del Amor, G.; Obis, A. (ITGE, Madrid (Spain))

    1990-07-01

    In spite of the low price of both oil and gas, underground coal gasification is still an attractive option because of the possibility for exploiting coal which it would be uneconomic to mine by conventional methods. New technology has recently made gasification into a reality and methods have been developed to gasify both deep and superficial inclined seams. Recent tests in nearly level seams in the USA have been successful so that the process has become competitive in spite of current oil prices. 3 figs.

  16. A breakthrough in coal gasification technology

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ Tearning up with engineers of the Jincheng Anthracite Mining Group in north China's Shanxi Province, CAS researchers have successfully carried out a 1.0MPa, long-period (up to 72 hours) high-pressure test on a semi- industrial platform of pressurized ash agglomerating fluidized bed (AFB) coal gasification.

  17. Fixed-bed gasification research using US coals. Volume 4. Gasification of Leucite Hills subbituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-03-31

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the fourth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of Leucite Hills subbituminous coal from Sweetwater County, Wyoming. The period of the gasification test was April 11-30, 1983. 4 refs., 23 figs., 27 tabs.

  18. Effect of gasification parameter on coal gasification in thermal plasma

    Energy Technology Data Exchange (ETDEWEB)

    Shen, S.; Pang, X.; Bao, W.; Lo, Y.; Zhu, S. [Taiyuan University of Technology, Taiyuan (China)

    2004-12-01

    The influence of several parameters such as the power input of plasma jet, vapor and air input etc on gas composition and carbon conversion from coal gasification in an air-steam plasma jet was studied. The main gaseous products are H{sub 2}, CO, CO{sub 2}, CH{sub 2}4 and tar was discovered. Results show that the concentration of H{sub 2}, CO and carbon conversion increases, and the concentration of CO{sub 2} significantly decreases, when the power input of plasma jet is raised. The concentration of H{sub 2} increases when the vapor flux is increased, but excessive steam can decrease carbon conversion. The carbon conversion is enhanced by decreasing feed rate. The air flux should be reduced to improve the quality of coal gas in a certain range. The carbon conversion of Datong coal can exceed 95% at appropriate condition. 18 refs., 4 figs., 2 tabs.

  19. Assessment of Advanced Coal Gasification Processes

    Science.gov (United States)

    McCarthy, John; Ferrall, Joseph; Charng, Thomas; Houseman, John

    1981-01-01

    This report represents a technical assessment of the following advanced coal gasification processes: AVCO High Throughput Gasification (HTG) Process; Bell Single-Stage High Mass Flux (HMF) Process; Cities Service/Rockwell (CS/R) Hydrogasification Process; Exxon Catalytic Coal Gasification (CCG) Process. Each process is evaluated for its potential to produce SNG from a bituminous coal. In addition to identifying the new technology these processes represent, key similarities/differences, strengths/weaknesses, and potential improvements to each process are identified. The AVCO HTG and the Bell HMF gasifiers share similarities with respect to: short residence time (SRT), high throughput rate, slagging and syngas as the initial raw product gas. The CS/R Hydrogasifier is also SRT but is non-slagging and produces a raw gas high in methane content. The Exxon CCG gasifier is a long residence time, catalytic, fluidbed reactor producing all of the raw product methane in the gasifier. The report makes the following assessments: 1) while each process has significant potential as coal gasifiers, the CS/R and Exxon processes are better suited for SNG production; 2) the Exxon process is the closest to a commercial level for near-term SNG production; and 3) the SRT processes require significant development including scale-up and turndown demonstration, char processing and/or utilization demonstration, and reactor control and safety features development.

  20. An advanced coal gasification desulfurization process

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Rehmat, A. (Institute of Gas Technology, Chicago, IL (USA)); Leppin, D. (Gas Research Inst., Chicago, IL (USA)); Banerjee, D.D. (Center for Research on Sulfur in Coal, Carterville, IL (USA))

    1990-01-01

    The Institute of Gas Technology (IGT) is in the process of developing an advanced coal gasification desulfurization process in which a calcium-based sorbent such as limestone or dolomite is injected into the fluidized-bed gasifier with coal to achieve in-bed desulfurization of coal as it is converted into clean fuel gas. The reactions involving calcium-based sorbents takes place in two steps. In the first step, the desulfurization reaction takes place between hydrogen sulfide and calcium oxide in the reducing zone of the reactor to produce calcium sulfide. The latter subsequently reacts with oxygen in the oxidizing zone of the reactor to produce calcium sulfate which can be safely disposed of along with the coal ash. This process will reduce the capital requirement for coal gasification plants and provide cost effective alternatives to scrubbers for industrial and utility use of high-sulfur coal. This paper addresses the basic research being conducted at IGT to confirm the viability of this process. 9 refs., 3 figs., 1 tab.

  1. An overview of world history of underground coal gasification

    Science.gov (United States)

    Konovšek, Damjan; Nadvežnik, Jakob; Medved, Milan

    2017-07-01

    We will give an overview of the activities in the field of underground coal gasification in the world through history. Also we will have a detailed presentation of the most successful and the most recent research and development projects. The currency and scope of the study of coal gasification processes are linked through recent history to the price of crude oil. We will show how by changing oil prices always changes the interest for investment in research in the field of coal gasification. Most coal-producing countries have developed comprehensive programs that include a variety of studies of suitable coal fields, to assess the feasibility and design pilot and commercial projects of underground coal gasification. The latest technologies of drilling in oil and gas industry now enable easier, simpler and more economically viable process underground coal gasification. The trend of increasing research in this area will continue forward until the implementation of commercial projects.

  2. Coal gasification power plant and process

    Science.gov (United States)

    Woodmansee, Donald E.

    1979-01-01

    In an integrated coal gasification power plant, a humidifier is provided for transferring as vapor, from the aqueous blowdown liquid into relatively dry air, both (I) at least a portion of the water contained in the aqueous liquid and (II) at least a portion of the volatile hydrocarbons therein. The resulting humidified air is advantageously employed as at least a portion of the hot air and water vapor included in the blast gas supplied via a boost compressor to the gasifier.

  3. Coal gasification: New challenge for the Beaumont rotary feeder

    Science.gov (United States)

    Stelian, J.

    1977-01-01

    The use of rotary feeders in the coal gasification process is described with emphasis on the efficient conversion of coal to clean gaseous fuels. Commercial applications of the rotary feeder system are summarized.

  4. Disposal of Soluble Salt Waste from Coal Gasification,

    Science.gov (United States)

    1980-06-01

    AD-A090 419 ARMY ARMAMENT RESEARCH AND DEVELOPMENT COMMAND ABERO-ETC F/S 13/2 DISPOSAL OF SOLUBLE SALT VBASTE FROM COAL GASIFICATION . 1W JUN 80 C E...use as pipe- line gasjof the Lurgi type will be used as a basis to explain the disposal process. The purpose of the coal gasification plant is to 470 MC...KNIGHT produce methane starting with coal, gasifying it and hydrogenating it. As supplies of low-sulfur coal diminish, coal gasification must operate

  5. Kinetic study of coals gasification into carbon dioxide atmosphere

    Directory of Open Access Journals (Sweden)

    Korotkikh A.G.

    2015-01-01

    Full Text Available The solid fuel gasification process was investigated to define chemical reactions rate and activation energy for a gas-generator designing and regime optimizing. An experimental procedure includes coal char samples of Kuznetskiy and Kansko-Achinskiy deposits consequent argon pyrolysis into argon and oxidating into carbon dioxide with different temperatures. The thermogravimetric analysis data of coal char gasification into carbon dioxide was obtained in the temperature range 900–1200 ºC. The mass loss and gasification time dependencies from temperature were defined to calculate chemical reaction frequency factor and activation energy. Two coal char gasification physico-mathematical models were proposed and recommendations for them were formed.

  6. Wabash River coal gasification repowering project: Public design report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-07-01

    The Wabash River Coal Gasification Repowering Project (the Project), conceived in October of 1990 and selected by the US Department of Energy as a Clean Coal IV demonstration project in September 1991, is expected to begin commercial operations in August of 1995. The Participants, Destec Energy, Inc., (Destec) of Houston, Texas and PSI Energy, Inc., (PSI) of Plainfield, Indiana, formed the Wabash River Coal Gasification Repowering Project Joint Venture (the JV) to participate in the DOE`s Clean Coal Technology (CCT) program by demonstrating the coal gasification repowering of an existing 1950`s vintage generating unit affected by the Clean Air Act Amendments (CAAA). The Participants, acting through the JV, signed the Cooperative Agreement with the DOE in July 1992. The Participants jointly developed, and separately designed, constructed, own, and will operate an integrated coal gasification combined cycle (CGCC) power plant using Destec`s coal gasification technology to repower Unit {number_sign}1 at PSI`s Wabash River Generating Station located in Terre Haute, Indiana. PSI is responsible for the new power generation facilities and modification of the existing unit, while Destec is responsible for the coal gasification plant. The Project demonstrates integration of the pre-existing steam turbine generator, auxiliaries, and coal handling facilities with a new combustion turbine generator/heat recovery steam generator tandem and the coal gasification facilities.

  7. Report to Congress on Contracting Approaches to Coal Gasification

    Science.gov (United States)

    2007-07-01

    of specific contracting approaches to coal gasification technology projects and submit a report on the findings by March 1, 2007. The report requests...if any, that may prevent the Department from effectively implementing coal gasification technology projects and recommendations for new authorities necessary to enable the effective implementation of such projects."

  8. Refractory Degradation by Slag Attack in Coal Gasification

    Science.gov (United States)

    2009-02-01

    REFRACTORY DEGRADATION BY SLAG ATTACK IN COAL GASIFICATION Jinichiro Nakano 1,2 , Sridhar Seetharaman 1,2 , James Bennett 3 , Kyei-Sing...00-2009 4. TITLE AND SUBTITLE Refractory Degradation by Slag Attack in Coal Gasification 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM

  9. Basic equations of channel model for underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    The underground coal gasification has advantages of zero rubbish, nonpollution, low cost and high safety. According to the characteristics of the gasification, the channel model of chemical fluid mechanics is used to set up the fluid equations and chemical equations by some reasonable suppositions in this paper, which lays a theoretical foundation on requirements of fluid movement rules in the process of underground coal gasification.

  10. Catalytic coal gasification: an emerging technology.

    Science.gov (United States)

    Hirsch, R L; Gallagher, J E; Lessard, R R; Wesslhoft, R D

    1982-01-08

    Catalytic coal gasification is being developed as a more efficient and less costly approach to producing methane from coal. With a potassium catalyst all the reactions can take place at one temperature, so that endothermic and exothermic reactions can be integrated in a single reactor. A key aspect of the concept involves continuous recycling of product carbon monoxide and hydrogen to the gasifier following separation of methane. Development of the process has advanced steadily since the basic concept was proposed in 1971. A 23-day demonstration run was recently completed in a process development unit with a coal feed rate of 1 ton per day. The next major step in the program will be to design and construct a large pilot plant to bring the technology to commercial readiness in the late 1980's.

  11. Robustness studies on coal gasification process variables

    Directory of Open Access Journals (Sweden)

    RLJ Coetzer

    2004-12-01

    Full Text Available Optimisation of the Sasol-Lurgi gasification process was carried out by utilising the method of Factorial Experimental Design on the process variables of interest from a specifically equipped full-scale test gasifier. The process variables that govern gasification are not always fully controllable during normal operation. This paper discusses the application of statistical robustness studies as a method for determining the most efficient combination of process variables that might be hard-to-control during normal operation. Response surface models were developed in the process variables for each of the performance variables. It will be shown how statistical robustness studies provided the optimal conditions for sustainable gasifier operability and throughput. In particular, the optimum operability region is significantly expanded towards higher oxygen loads by changing and controlling the particle size distribution of the coal.

  12. Economics of coal conversion processing. Advances in coal gasification: support research. Advances in coal gasification: process development and analysis

    Energy Technology Data Exchange (ETDEWEB)

    1978-01-01

    The fall meeting of the American Chemical Society, Division of Fuel Chemistry, was held at Miami Beach, Florida, September 10-15, 1978. Papers involved the economics of coal conversion processing and advances in coal gasification, especially support research and process development and analysis. Fourteen papers have been entered individually into EDB and ERA; three papers had been entered previously from other sources. (LTN)

  13. Monitoring of Underground Coal Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Yang, X. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Wagoner, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Ramirez, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2012-08-31

    For efficient and responsible UCG operations, a UCG process must be monitored in the following three categories: 1) process parameters such as injection and product gas flow rates, temperature, pressure and syngas content and heating value; 2) geomechanical parameters, e.g., cavity and coal seam pressures, cavity development, subsidence and ground deformation; and 3) environmental parameters, e.g., groundwater chemistry and air quality. This report focuses on UCG monitoring with geophysical techniques that can contribute to monitoring of subsurface temperature, cavity development, burn front, subsidence and deformation.

  14. Clean fuels from coal gasification.

    Science.gov (United States)

    Squires, A M

    1974-04-19

    The quickest way to establish a visible new margin against energy demand is the historic producer serving small industry and gasifying Pennsylvania anthracite. In 2 years many producers could be in operation. The quickest way to obtain significant supplies of "new" gas or oil is to retrofit existing electricity and industrial boilers for power or industrial gas. Important results could be achieved in 6 years. Table 3 identifies development activities deserving high priority to speed the capture of gas and oil now burned in boilers, and to speed realization the advantages of combined-cycle equipment running on coal (8). Obviously, these activities are not enough. Many exciting and worthwhile concepts at various stages of development can furnish improved techniques for converting coal to pipeline gas and liquid fuels for the long run. Reviews of these concepts are available (6, 32, 35). I have neglected them in this article not to deny their importance but to stress the earlier opportunities from technology that is ready now, or nearly ready. The oil and gas industries might well consider the historical progression from Wells Fargo to Western Union to American Telephone and Telegraph to Radio Corporation of America. These industries will miss the boat if they regard themselves simply as purveyors of their historical fuels and not as purveyors of clean energy. The gas industry especially will be in trouble if it lets its major industrial customers, such as steel and electricity, provide their own supplies of power and industrial gas.

  15. Carbon dioxide sorption capacities of coal gasification residues.

    Science.gov (United States)

    Kempka, Thomas; Fernández-Steeger, Tomás; Li, Dong-Yong; Schulten, Marc; Schlüter, Ralph; Krooss, Bernhard M

    2011-02-15

    Underground coal gasification is currently being considered as an economically and environmentally sustainable option for development and utilization of coal deposits not mineable by conventional methods. This emerging technology in combination with carbon capture and sorptive CO2 storage on the residual coke as well as free-gas CO2 storage in the cavities generated in the coal seams after gasification could provide a relevant contribution to the development of Clean Coal Technologies. Three hard coals of different rank from German mining districts were gasified in a laboratory-scale reactor (200 g of coal at 800 °C subjected to 10 L/min air for 200 min). High-pressure CO2 excess sorption isotherms determined before and after gasification revealed an increase of sorption capacity by up to 42%. Thus, physical sorption represents a feasible option for CO2 storage in underground gasification cavities.

  16. Fixed-bed gasification research using US coals. Volume 10. Gasification of Benton lignite

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the tenth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of Benton lignite. The period of gasification test was November 1-8, 1983. 16 refs., 22 figs., 19 tabs.

  17. Investigation of polycyclic aromatic hydrocarbons from coal gasification.

    Science.gov (United States)

    Zhou, Hong-cang; Jin, Bao-sheng; Zhong, Zhao-ping; Huang, Ya-ji; Xiao, Rui; Li, Da-ji

    2005-01-01

    The hazardous organic pollutants generated from coal gasification, such as polycyclic aromatic hydrocarbons(PAHs), are highly mutagenic and carcinogenic. More researchers have paid particular attention to them. Using air and steam as gasification medium, the experiments of three kinds of coals were carried out in a bench-scale atmospheric fluidized bed gasifier. The contents of the 16 PAHs specified by US EPA in raw coal, slag, bag house coke, cyclone coke and gas were measured by HPLC to study the contents of PAHs in raw coal and the effects of the inherent characters of coals on the formation and release of PAHs in coal gasification. The experimental results showed that the distributions of PAHs in the gasified products are similar to raw coals and the total-PAHs content in coal gasification is higher than in raw coal(except Coal C). The total-PAHs contents increase and then decrease with the rise of fixed carbon and sulfur of coal while there has an opposite variation when volatile matters content increase. The quantities of PAHs reduce with the increase of ash content or the drop of heating value during coal gasification.

  18. Investigation of polycyclic aromatic hydrocarbons from coal gasification

    Institute of Scientific and Technical Information of China (English)

    ZHOU Hong-cang; JIN Bao-sheng; ZHONG Zhao-ping; HUANG Ya-ji; XIAO Rui; LI Da-ji

    2005-01-01

    The hazardous organic pollutants generated from coal gasification, such as polycyclic aromatic hydrocarbons(PAHs), are highly mutagenic and carcinogenic. More researchers have paid particular attention to them. Using air and steam as gasification medium, the experiments of three kinds of coals were carried out in a bench-scale atmospheric fluidized bed gasifier. The contents of the 16 PAHs specified by US EPA in raw coal, slag, bag house coke, cyclone coke and gas were measured by HPLC to study the contents of PAHs in raw coal and the effects of the inherent characters of coals on the formation and release of PAHs in coal gasification. The experimental results showed that the distributions of PAHs in the gasified products are similar to raw coals and the total-PAHs content in coal gasification is higher than in raw coal(except Coal C). The total-PAHs contents increase and then decrease with the rise of fixed carbon and sulfur of coal while there has an opposite variation when volatile matters content increase. The quantities of PAHs reduce with the increase of ash content or the drop of heating value during coal gasification.

  19. Coal Integrated Gasification Fuel Cell System Study

    Energy Technology Data Exchange (ETDEWEB)

    Chellappa Balan; Debashis Dey; Sukru-Alper Eker; Max Peter; Pavel Sokolov; Greg Wotzak

    2004-01-31

    This study analyzes the performance and economics of power generation systems based on Solid Oxide Fuel Cell (SOFC) technology and fueled by gasified coal. System concepts that integrate a coal gasifier with a SOFC, a gas turbine, and a steam turbine were developed and analyzed for plant sizes in excess of 200 MW. Two alternative integration configurations were selected with projected system efficiency of over 53% on a HHV basis, or about 10 percentage points higher than that of the state-of-the-art Integrated Gasification Combined Cycle (IGCC) systems. The initial cost of both selected configurations was found to be comparable with the IGCC system costs at approximately $1700/kW. An absorption-based CO2 isolation scheme was developed, and its penalty on the system performance and cost was estimated to be less approximately 2.7% and $370/kW. Technology gaps and required engineering development efforts were identified and evaluated.

  20. Coal Integrated Gasification Fuel Cell System Study

    Energy Technology Data Exchange (ETDEWEB)

    Chellappa Balan; Debashis Dey; Sukru-Alper Eker; Max Peter; Pavel Sokolov; Greg Wotzak

    2004-01-31

    This study analyzes the performance and economics of power generation systems based on Solid Oxide Fuel Cell (SOFC) technology and fueled by gasified coal. System concepts that integrate a coal gasifier with a SOFC, a gas turbine, and a steam turbine were developed and analyzed for plant sizes in excess of 200 MW. Two alternative integration configurations were selected with projected system efficiency of over 53% on a HHV basis, or about 10 percentage points higher than that of the state-of-the-art Integrated Gasification Combined Cycle (IGCC) systems. The initial cost of both selected configurations was found to be comparable with the IGCC system costs at approximately $1700/kW. An absorption-based CO2 isolation scheme was developed, and its penalty on the system performance and cost was estimated to be less approximately 2.7% and $370/kW. Technology gaps and required engineering development efforts were identified and evaluated.

  1. Japan's Sunshine Project 1988 annual summary of coal liquefaction and gasification

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    Describes work carried out during the year on coal liquefaction and gasification technologies, bituminous and brown coal liquefaction, development of machinery and materials for coal liquefaction plant, coal type selection studies, data collection and processing, utilization and upgrading technology of coal derived products, toxicological and environmental effects of liquefied coal, coal-based hydrogen production technology and technology for entrained flow coal gasification.

  2. Coal gasification with water under supercritical conditions

    Energy Technology Data Exchange (ETDEWEB)

    A.A. Vostrikov; S.A. Psarov; D.Yu. Dubov; O.N. Fedyaeva; M.Ya. Sokol [Russian Academy of Sciences, Novosibirsk (Russian Federastion). Kutateladze Institute of Thermophysics, Siberian Division

    2007-08-15

    The conversion of an array of coal particles in supercritical water (SCW) was studied in a semibatch reactor at a pressure of 30 MPa, 500-750{sup o}C, and a reaction time of 1-12 min. The bulk conversion, surface conversion, and random pore models were used to describe the conversion. The quantitative composition of reaction products was determined, and the dependence of the rate of reaction on the degree of coal conversion, reaction time, and reaction temperature was obtained on the assumption of a first-order reaction and the Arrhenius function. It was found that the gasification of coal under SCW conditions without the addition of oxidizing agents is a weakly endothermic process. The addition of CO{sub 2} to SCW decreased the rate of conversion and increased the yield of CO. It was found that, at a 90% conversion of the organic matter of coal (OMC) in a flow of SCW in a time of 2 min, the process power was 26 W/g per gram of OMC.

  3. Biological removal of organic constituents in quench water from a slagging, fixed-bed coal-gasification pilot plant

    Energy Technology Data Exchange (ETDEWEB)

    Stamoudis, V C; Luthy, R G

    1980-02-01

    This study is part of an effort to assess the efficiency of activated-sludge treatment for removal of organic constituents from high-Btu coal-gasification pilot-plant quench waters. A sample of raw-gas quench water was obtained from the Grand Forks Energy and Technology Center's pilot plant, which employs the slagging, fixed-bed gasification process. The quench water generated in the processing of Indian Head lignite was pretreated to reduce ammonia and alkalinity, and then diluted and subjected to long-term biological treatment, followed by detailed characterization and analysis of organic constituents. The pretreated (influent) and treated (effluent) samples were extracted using a methylene chloride, pH-fractionation method to obtain acid, base, and neutral fractions, which were analyzed by capillary-column gas chromatography/mass spectrometry (GC/MS). Over 99% of the total extractable and chromatographable organic material in the influent acid fraction was composed of phenol and alkylated phenols. Biological treatment removed these compounds almost completely. Major components of the influent base fraction were alkylated pyridines, anilines, aminopyrroles, imidazoles and/or pyrazoles, diazines, and quinolines. Removal efficiency of these compounds ranged between 90 and 100%. The influent neutral fraction was composed mainly of cycloalkanes, cycloalkenes, naphthalene, indole, acetophenone, and benzonitrile. Alkylated benzenes were generally absent. Removal efficiencies of these compounds were generally very good, except for certain alkylated cycloalkanes and cycloalkenes. Results are compared with those of a similar study on HYGAS coal-gasification quench water.

  4. CATALYTIC GASIFICATION OF COAL USING EUTECTIC SALT MIXTURES

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Yaw D. Yeboah; Dr. Yong Xu; Dr. Atul Sheth; Dr. Pradeep Agrawal

    2001-12-01

    The Gas Research Institute (GRI) estimates that by the year 2010, 40% or more of U.S. gas supply will be provided by supplements including substitute natural gas (SNG) from coal. These supplements must be cost competitive with other energy sources. The first generation technologies for coal gasification e.g. the Lurgi Pressure Gasification Process and the relatively newer technologies e.g. the KBW (Westinghouse) Ash Agglomerating Fluidized-Bed, U-Gas Ash Agglomerating Fluidized-Bed, British Gas Corporation/Lurgi Slagging Gasifier, Texaco Moving-Bed Gasifier, and Dow and Shell Gasification Processes, have several disadvantages. These disadvantages include high severities of gasification conditions, low methane production, high oxygen consumption, inability to handle caking coals, and unattractive economics. Another problem encountered in catalytic coal gasification is deactivation of hydroxide forms of alkali and alkaline earth metal catalysts by oxides of carbon (CO{sub x}). To seek solutions to these problems, a team consisting of Clark Atlanta University (CAU, a Historically Black College and University, HBCU), the University of Tennessee Space Institute (UTSI) and Georgia Institute of Technology (Georgia Tech) proposed to identify suitable low melting eutectic salt mixtures for improved coal gasification. The research objectives of this project were to: Identify appropriate eutectic salt mixture catalysts for coal gasification; Assess agglomeration tendency of catalyzed coal; Evaluate various catalyst impregnation techniques to improve initial catalyst dispersion; Determine catalyst dispersion at high carbon conversion levels; Evaluate effects of major process variables (such as temperature, system pressure, etc.) on coal gasification; Evaluate the recovery, regeneration and recycle of the spent catalysts; and Conduct an analysis and modeling of the gasification process to provide better understanding of the fundamental mechanisms and kinetics of the process.

  5. Coal gasification systems engineering and analysis. Appendix A: Coal gasification catalog

    Science.gov (United States)

    1980-01-01

    The scope of work in preparing the Coal Gasification Data Catalog included the following subtasks: (1) candidate system subsystem definition, (2) raw materials analysis, (3) market analysis for by-products, (4) alternate products analysis, (5) preliminary integrated facility requirements. Definition of candidate systems/subsystems includes the identity of and alternates for each process unit, raw material requirements, and the cost and design drivers for each process design.

  6. Characterisation of coal and chars in fluidised bed gasification

    CSIR Research Space (South Africa)

    Oboirien, BO

    2009-03-01

    Full Text Available residual char generated from some selected high-ash South African coals. The selected coals are different in rank, maceral and mineral matter composition. Pilotscale fluidised bed gasification tests were carried out on the selected coals within a...

  7. Coal gasification. (Latest citations from the EI compendex*plus database). Published Search

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-03-01

    The bibliography contains citations concerning the development and assessment of coal gasification technology. Combined-cycle gas turbine power plants are reviewed. References also discuss dry-feed gasification, gas turbine interface, coal gasification pilot plants, underground coal gasification, gasification with nuclear heat, and molten bath processes. Clean-coal based electric power generation and environmental issues are examined. (Contains 50-250 citations and includes a subject term index and title list.) (Copyright NERAC, Inc. 1995)

  8. Coal gasification. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of 18 coal gasification pilot plants or supporting projects supported by US DOE is reviewed under the following headings: company involved, location, contract number, funding, gasification process, history, process description, flowsheet and progress in the July-September 1979 quarter. (LTN)

  9. Impact of RCRA on coal gasification wastes

    Energy Technology Data Exchange (ETDEWEB)

    None

    1979-08-01

    Coal conversion processes offer the potential for almost every possible mode of environmental contamination. Potential environmental pollution will occur from huge streams of wastewater, scores of gaseous vents and enormous quantities of solid materials. The nature of the waste streams is of particular concern in view of the recently enacted Resource Conservation and Recovery Act (RCRA). The passage and implementation of RCRA poses new levels of control for the traditional solid waste disposal process and establishes a new set of material standards for hazardous wastes in which conforming materials will require even more stringent controls. Key definitions in the Act which may pertain to coal gasification wastes include hazardous waste, sludge and solid waste. It is the goal of this report to collect, analyze, and interpret data and other technical information relevant to solid waste by-product generation, handling, and disposal at existing and future coal conversion plants. The analysis and interpretation of the collected data has been directed towards identifying gaps in the data, potential problem areas in solid waste disposal in view of RCRA, and needed research activities in the area of solid waste disposal.

  10. Coal gasification characteristics in a downer reactor

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Y.J.; Lee, S.H.; Kim, S.D. [Korea Advanced Institute of Science and Technology, Taejon (Republic of Korea). Dept. of Chemical Engineering and Energy & Environmental Research Center

    2001-10-26

    Subbituminous coal (Shenwha) was gasified at atmospheric pressure in a downer reactor (0.1 m.I.D. x 5.0 high). The effects of reaction temperature (750-850{degree}C), steam/coal mass ratio (0.23 - 0.86), O{sub 2}/H{sub 2}O mole ratio (0.81) and coal feeding rate (5.3-9.0 kg h{sup -1}) on the composition of product gas, carbon conversion, cold gas efficiency, gas yield and calorific value have been determined. In the case of steam injection into the loop-seal, compositions of the product gas (vol. %; N{sub 2} free basis) in the gasification ration are H{sub 2}, CH{sub 4}, CO, CO{sub 2}, C{sub 2}H{sub 4}, C{sub 2}H{sub 6}, C{sub 3}H{sub 6} and C{sub 3}H{sub 8} with a calorific value of 13.0-15.2 MJ/m{sup 3}. By changing the reactant gas supplied into the loop-seal for solid circulating from steam to air, product gas yield and carbon conversion increase, whereas calorific value of the product gas decreases from 13.0-15.2 to 6.3-10.6 with reaction temperature. 22 refs., 12 figs., 1 tab.

  11. Global Development of Commercial Underground Coal Gasification

    Science.gov (United States)

    Blinderman, M. S.

    2017-07-01

    Global development of Underground Coal Gasification (UCG) is considered here in light of latest trends of energy markets and environmental regulations in the countries that have been traditional proponents of UCG. The latest period of UCG development triggered by initial success of the Chinchilla UCG project (1997-2006) has been characterized by preponderance of privately and share-market funded developments. The deceleration of UCG commercialization has been in part caused by recent significant decrease of world oil, gas and coal prices. Another substantial factor was lack of necessary regulations governing extraction and conversion of coal by UCG method in the jurisdictions where the UCG projects were proposed and developed. Along with these objective causes there seem to have been more subjective and technical reasons for a slowdown or cancelation of several significant UCG projects, including low efficiency, poor environmental performance, and inability to demonstrate technology at a sufficient scale and/or at a competitive cost. Latest proposals for UCG projects are briefly reviewed.

  12. Kinetic study of coals gasification into carbon dioxide atmosphere

    OpenAIRE

    Korotkikh A.G.; Slyusarskiy K.V.

    2015-01-01

    The solid fuel gasification process was investigated to define chemical reactions rate and activation energy for a gas-generator designing and regime optimizing. An experimental procedure includes coal char samples of Kuznetskiy and Kansko-Achinskiy deposits consequent argon pyrolysis into argon and oxidating into carbon dioxide with different temperatures. The thermogravimetric analysis data of coal char gasification into carbon dioxide was obtained in the temperature range 900–1200 ºC. The ...

  13. Exergetic analysis of coal gasification processes

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P.; Conger, W.L.

    1980-12-01

    In this study, the efficiency and economics of the Synthane Gasification process are evaluated and discussed. The efficiency of the Synthane process was determined using the exergy analysis (availability) approach to process evaluation. The exergy analysis utilizes both the first and second laws of thermodynamics to determine the efficiency of a process, and is very useful in determining the causes of inefficiency. In order to accurately apply the exergy analysis, it is essential that the absolute enthalpy and entropy values of each stream be determined. In this study, methods for predicting the enthalpy and entropy of coal, char, tar, and ash, as a function of temperature and material composition previously developed were used. A computer simulation of the Synthane process was developed which allowed for the effect of changes in plant operating parameters on both the efficiency and economics. The simulation included a three-section model of the Synthane fluidized bed gasifier.

  14. Rock massif observation from underground coal gasification point of view

    Directory of Open Access Journals (Sweden)

    T. Sasvári

    2009-04-01

    Full Text Available The Underground coal gasification (UCG of the coal seams is determined by suitable geological structure of the area. The assumption of the qualitative changes of the rock massif can be also enabled by application of geophysical methods (electric resisting methods and geoelectric tomography. This article shows the example of evaluating possibilities of realization of the underground coal gasification in the area of the Upper Nitra Coal Basin in Cíge¾ and Nováky deposits, and recommend the needs of cooperation among geological, geotechnical and geophysical researchers.

  15. Underground Coal Gasification - Experience of ONGC

    Science.gov (United States)

    Jain, P. K.

    2017-07-01

    Underground Coal Gasification (UCG) is expected to be game changer for nation like ours that requires large amounts of energy but have few natural resources other than coal. ONGC, being an integrated energy company and due to synergy between E & P operations and UCG, envisaged opportunities in UCG business. Its first campaign on UCG started in 1980s. With its initiative, a National Committee for UCG was constituted with representatives from Ministry of Petroleum, Dept. of Coal, CSIR, CMPDIL, State of Gujarat and ONGC for experimenting a pilot. It was decided in mid-1986 to carry out a UCG pilot in Sobhasan area of Mehsana district which was to be funded by OIDB. Two information wells were drilled to generate geological, geophysical, geo-hydrological data and core/coal samples. 3-D seismic survey data of Mehsana area was processed and interpreted and geological model was prepared. Basic designing of pilot project, drilling and completion, strategy of process wells and designing of surface facilities were carried out. The project could not be pursued further due to escalation in cost and contractual difficulty with design consultant. ONGC second UCG campaign commenced with signing of an agreement of collaboration (AOC) with Skochinsky Institute of Mining (SIM), Russia on 25th November 2004 for Underground Coal Gasification (UCG). In parallel, MOUs were signed with major coal and power companies, namely, Gujarat Industries Power Company Ltd (GIPCL), Gujarat Mineral Development Corporation Ltd (GMDC), Coal India Ltd (CIL), Singareni Colliery Company Ltd (SCCL) and NLC India Ltd. Under the AOC, suitability study was carried out for different sites belonging to MOU companies. Only Vastan mine block, Nani Naroli, Surat, Gujarat was found to be suitable for UCG. Therefore, subsequent stages of detailed characterization & pilot layout, detailed engineering design were taken up for Vastan site. After enormous efforts for quite long since 2006, in the absence of UCG policy

  16. Current experiences in applied underground coal gasification

    Science.gov (United States)

    Peters, Justyn

    2010-05-01

    The world is experiencing greater stress on its ability to mine and exploit energy resources such as coal, through traditional mining methods. The resources available by extraction from traditional mining methods will have a finite time and quantity. In addition, the high quality coals available are becoming more difficult to find substantially increasing exploration costs. Subsequently, new methods of extraction are being considered to improve the ability to unlock the energy from deep coals and improve the efficiency of the exploitation of the resources while also considering the mitigation of global warming. Underground Coal Gasification (UCG) is a leading commercial technology that is able to maximize the exploitation of the deep coal through extraction of the coal as a syngas (CO and H2) in situ. The syngas is then brought to the surface and efficiently utilized in any of combined cycle power generation, liquid hydrocarbon transport fuel production, fertilizer production or polymer production. Commercial UCG has been successfully operating for more than 50 years at the Yerostigaz facility in Angren, Uzbekistan. Yerostigaz is the only remaining UCG site in the former Soviet Union. Linc Energy currently owns 91.6% of this facility. UCG produces a high quality synthetic gas (syngas), containing carbon monoxide, hydrogen and methane. UCG produced syngas can be economically used for a variety of purposes, including: the production of liquid fuels when combined with Gas to Liquids (GTL) technology power generation in gas turbine combined cycle power stations a feedstock for different petrochemical processes, for example producing chemicals or other gases such as hydrogen, methane, ammonia, methanol and dimethyl ether Linc Energy has proven the combined use of UCG to Gas to Liquids (GTL) technologies. UCG to GTL technologies have the ability to provide energy alternatives to address increasing global demand for energy products. With these technologies, Linc Energy is

  17. Coal gasification. Quarterly report, October--December 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-05-01

    A number of the processes for converting coal to gas supported by US DOE have reached the pilot plant stage. Laboratory research is also continuing in order to develop data for verifying the feasibility of the specific process and for supporting the operation of the plant. Responsibility for designing, constructing, and operating these pilot plants is given. The most successful test to date was completed in the pilot plant of the BI-GAS Process. The HYGAS Process pilot plant continued testing with Illinois bituminous coal to acquire data necessary to optimize the design of a commercial demonstration plant using the HYGAS process. The Synthane Process pilot plant continued studies of Illinois No. 6 coal. Other processes discussed are: Agglomerating Burner Process, Liquid Phase Methanation Process, Molten Salt Gasification Process, Advanced Coal Gasification System, and Lo-Btu Gasification of Coal for Electric Power Generation. Each project is described briefly with funding, history, and progress during the quarter. (LTN)

  18. Wabash River coal gasification repowering project -- first year operation experience

    Energy Technology Data Exchange (ETDEWEB)

    Troxclair, E.J. [Destec Energy, Inc., Houston, TX (United States); Stultz, J. [PSI Energy, Inc., West Terre Haute, IN (United States)

    1997-12-31

    The Wabash River Coal Gasification Repowering Project (WRCGRP), a joint venture between Destec Energy, Inc. and PSI Energy, Inc., began commercial operation in November of 1995. The Project, selected by the United States Department of Energy (DOE) under the Clean Coal Program (Round IV) represents the largest operating coal gasification combined cycle plant in the world. This Demonstration Project has allowed PSI Energy to repower a 1950`s vintage steam turbine and install a new syngas fired combustion turbine to provide 262 MW (net) of electricity in a clean, efficient manner in a commercial utility setting while utilizing locally mined high sulfur Indiana bituminous coal. In doing so, the Project is also demonstrating some novel technology while advancing the commercialization of integrated coal gasification combined cycle technology. This paper discusses the first year operation experience of the Wabash Project, focusing on the progress towards achievement of the demonstration objectives.

  19. Assessment of the labor impacts of coal gasification systems: Project No. 61027. Final report. [Considers a 250 billion Btu/day coal gasification plant, in each of 17 counties with sufficient coal, in terms of available labor and in-migration necessary

    Energy Technology Data Exchange (ETDEWEB)

    Donakowski, T.D.; Daniels, E.J.

    1980-12-01

    The Institute of Gas Technology has estimated the labor requirements and their impacts for construction and operation of coal gasification systems (mine and plant). Commercial-size high-, medium-, and low-Btu systems were studied. For the high-Btu system (1000 Btu/SCF) producing 250 billion Btu/day, the labor requirements are shown in Table ES-1. For small, low-Btu systems (150 Btu/SCF) producing 1.5 billion Btu/day, we determined that about 300 systems have equivalent labor requirements to one high-Btu system. Requirements include both mining and gasifying coal. Both basic and secondary (supportive) labor were considered during the 4-year construction and 20-year operation phases of the system. The requirements are expected values based on a sample of 17 counties that we consider as potential sites for gasification. Labor availability at the county level was obtained from the Social and Economic Assessment Model developed by Argonne National Laboratory. This model allowed us to estimate in-migration requirements. If one assmes a commercialization scenario of ten systems under construction simultaneously, the average number of workers required during the 4-year construction period is the sum of basic and secondary labor, or about 77,830. If ten systems are operating simultaneously, about 47,000 workers are required for 20 years. In-migration (or training) impacts during the construction phase of this scenario is about 49,270 workers; during the operation phase, it is about 13,900. A qualitative evaluation of future labor supply by types of occupations indicates that shortages are possible for engineers, painters, pipefitters, ironworkers, and cement masons as coal gasification technology becomes increasingly commercialized.

  20. Imaging the Underground Coal Gasification Zone with Microgravity Surveys

    Directory of Open Access Journals (Sweden)

    Kotyrba Andrzej

    2015-06-01

    Full Text Available The paper describes results of microgravity measurements made on the surface over an underground geo reactor where experimental coal gasification was performed in a shallow seam of coal. The aim of the research was to determine whether, and to what extent, the microgravity method can be used to detect and image a coal gasification zone, especially caverns where the coal was burnt out. In theory, the effects of coal gasification process create caverns and cracks, e.g., zones of altered bulk density. Before the measurements, theoretical density models of completely and partially gasified coal were analysed. Results of the calculations of gravity field response showed that in both cases on the surface over the gasification zone there should be local gravimetric anomalies. Over the geo reactor, two series of gravimetric measurements prior to and after gasification were conducted. Comparison of the results of two measurement series revealed the presence of gravimetric anomalies that could be related to the cavern formation process. Data from these measurements were used to verify theoretical models. After the experiment, a small cavern was detected at the depth of the coal seam by the test borehole drilled in one of the anomalous areas.

  1. Imaging the Underground Coal Gasification Zone with Microgravity Surveys

    Science.gov (United States)

    Kotyrba, Andrzej; Kortas, Łukasz; Stańczyk, Krzysztof

    2015-06-01

    The paper describes results of microgravity measurements made on the surface over an underground geo reactor where experimental coal gasification was performed in a shallow seam of coal. The aim of the research was to determine whether, and to what extent, the microgravity method can be used to detect and image a coal gasification zone, especially caverns where the coal was burnt out. In theory, the effects of coal gasification process create caverns and cracks, e.g., zones of altered bulk density. Before the measurements, theoretical density models of completely and partially gasified coal were analysed. Results of the calculations of gravity field response showed that in both cases on the surface over the gasification zone there should be local gravimetric anomalies. Over the geo reactor, two series of gravimetric measurements prior to and after gasification were conducted. Comparison of the results of two measurement series revealed the presence of gravimetric anomalies that could be related to the cavern formation process. Data from these measurements were used to verify theoretical models. After the experiment, a small cavern was detected at the depth of the coal seam by the test borehole drilled in one of the anomalous areas.

  2. Application and development status of coal gasification technology in China

    Institute of Scientific and Technical Information of China (English)

    BU Xue-peng; XU Zhen-gang

    2004-01-01

    Introduced the application and development status of coal gasification technology in China. The most widely used coal gasification technology in China is the atmospheric fixed-bed gasifier, its total number is about 9 000. About 30 pressurized fixed-bed gasifiers are in operation, and more than 10 atmospheric fluidized-bed gasifiers were used. There are 13 Texaco entrained-flow bed gasifiers are under operation,10 Texaco and 11 Shell gasifiers that are being installed or imported. About 10 underground gasifiers are under running now. The present R&D of coal gasification technologies are to improve the operation and controlling level of fixed-bed gasification technology, and developing or demonstration of fluidized-bed and entrained-flow bed gasifiers.

  3. A contrast study on different gasifying agents of underground coal gasification at Huating Coal Mine

    Institute of Scientific and Technical Information of China (English)

    WANG Zuo-tang; HUANG Wen-gang; ZHANG Peng; XIN Lin

    2011-01-01

    To optimize the technological parameter of underground coal gasification (UCG), the experimental results of air gasification, air-steam gasification, oxygen-enrichment steam gasification, pure oxygen steam gasification and two-stage gasification were studied contrastively based on field trial at the Huating UCG project. The results indicate that the average low heat value of gas from air experiment is the lowest (4.1 MJ/Nm3) and the water gas from two-stage gasification experiment is the highest (10.72 MJ/Nm3). The gas productivity of air gasification is the highest and the pure oxygen steam gasification is the lowest. The gasification efficiency of air gasification, air-steam gasification, oxygen-enriched steam gasification, pure oxygen steam gasification and two-stage gasification is listed in ascending order, ranging from 69.88% to 84.81%. Described a contract study on results of a field test using steam and various levels of oxygen enrichment of 21%, 32%, 42% and 100%. The results show that, with the increasing of O2 content in gasifying agents, the gas caloricity rises, and the optimal O2 concentration range to increase the gas caloricity is 30%~40%. Meanwhile, the consumption of O2 and steam increase, and the air consumption and steam decomposition efficiency fall.

  4. Underground coal gasification technology impact on coal reserves in Colombia

    Directory of Open Access Journals (Sweden)

    John William Rosso Murillo

    2013-12-01

    Full Text Available In situ coal gasification technology (Underground Coal Gasification–UCG– is an alternative to the traditional exploitation, due to it allows to reach the today’s inaccessible coal reserves’ recovery, to conventional mining technologies. In this article I answer the question on how the today’s reserves available volume, can be increased, given the possibility to exploit further and better the same resources. Mining is an important wealth resource in Colombia as a contributor to the national GDP. According with the Energy Ministry (Ministerio de Minas y Energía [1] mining has been around 5% of total GDP in the last years. This is a significant fact due to the existence of a considerable volume of reserves not accounted for (proved reserves at year 2010 were 6.700 million of tons. Source: INGEOMINAS and UPME, and the coal future role’s prospect, in the world energy production.

  5. Steam jacket dynamics in underground coal gasification

    Science.gov (United States)

    Otto, Christopher; Kempka, Thomas

    2017-04-01

    Underground coal gasification (UCG) has the potential to increase the world-wide hydrocarbon reserves by utilization of deposits not economically mineable by conventional methods. In this context, UCG involves combusting coal in-situ to produce a high-calorific synthesis gas, which can be applied for electricity generation or chemical feedstock production. Apart from high economic potentials, in-situ combustion may cause environmental impacts such as groundwater pollution by by-product leakage. In order to prevent or significantly mitigate these potential environmental concerns, UCG reactors are generally operated below hydrostatic pressure to limit the outflow of UCG process fluids into overburden aquifers. This pressure difference effects groundwater inflow into the reactor and prevents the escape of product gas. In the close reactor vicinity, fluid flow determined by the evolving high reactor temperatures, resulting in the build-up of a steam jacket. Numerical modeling is one of the key components to study coupled processes in in-situ combustion. We employed the thermo-hydraulic numerical simulator MUFITS (BINMIXT module) to address the influence of reactor pressure dynamics as well as hydro-geological coal and caprock parameters on water inflow and steam jacket dynamics. The US field trials Hanna and Hoe Creek (Wyoming) were applied for 3D model validation in terms of water inflow matching, whereby the good agreement between our modeling results and the field data indicates that our model reflects the hydrothermal physics of the process. In summary, our validated model allows a fast prediction of the steam jacket dynamics as well as water in- and outflows, required to avoid aquifer contamination during the entire life cycle of in-situ combustion operations.

  6. Fixed-bed gasification research using US coals. Volume 8. Gasification of River King Illinois No. 6 bituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the eighth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of River King Illinois No. 6 bituminous coal. The period of gasification test was July 28 to August 19, 1983. 6 refs., 23 figs., 25 tabs.

  7. New projects for CCGTs with coal gasification (Review)

    Science.gov (United States)

    Olkhovskii, G. G.

    2016-10-01

    Perspectives of using coal in combined-cycle gas turbine units (CCGTs), which are significantly more efficient than steam power plants, have been associated with preliminary coal gasification for a long time. Due to gasification, purification, and burning the resulting synthesis gas at an increased pressure, there is a possibility to intensify the processes occurring in them and reduce the size and mass of equipment. Physical heat evolving from gasification can be used without problems in the steam circuit of a CCGT. The downside of these opportunities is that the unit becomes more complex and expensive, and its competitiveness is affected, which was not achieved for CCGT power plants with coal gasification built in the 1990s. In recent years, based on the experience with these CCGTs, several powerful CCGTs of the next generation, which used higher-output and cost-effective gas-turbine plants (GTPs) and more advanced systems of gasification and purification of synthesis gas, were either built or designed. In a number of cases, the system of gasification includes devices of CO vapor reforming and removal of the emitted CO2 at a high pressure prior to fuel combustion. Gasifiers with air injection instead of oxygen injection, which is common in coal chemistry, also find application. In this case, the specific cost of the power station considerably decreases (by 15% and more). In units with air injection, up to 40% air required for separation is drawn from the intermediate stage of the cycle compressor. The range of gasified coals has broadened. In order to gasify lignites in one of the projects, a transfer reactor was used. The specific cost of a CCGT with coal gasification rose in comparison with the period when such units started being designed, from 3000 up to 5500 dollars/kW.

  8. APPRAISAL OF THE POPULATION THREAT RISK BY CARBON LEAKAGE PRODUCED BY UNDERGROUND COAL GASIFICATION

    OpenAIRE

    Šofranko, Marian; Škvareková, Erika; Laciak, Marek

    2013-01-01

    The UCG /underground coal gasification/ technology could increase energy production resulting in improving the economic situation. Even if the risk of accidents may occur in the both coal gasification and underground mining, the other parameters suggest that the coal gasification method is much safer that the underground mining.

  9. Steam and air plasma gasification of bituminous coal and petrocoke

    Directory of Open Access Journals (Sweden)

    Vladimir Messerle

    2012-12-01

    Full Text Available This paper presents a numerical analysis and experimental investigation of two very different solid fuels, low-rank bituminous coal of 40 % ash content and petrocoke of 3 % ash content, gasification under steam and air plasma conditions with an aim of producing synthesis gas. Numerical analysis was fulfilled using the software package TERRA for equilibrium computation. Using the results of the numerical simulation, experiments on plasma steam gasification of the petrocoke and air and steam gasification of the coal were conducted in an original installation. Nominal power of the plasma installation is 100 kWe and sum consumption of the reagents is up to 20 kg/h. High quality synthesis gas was produced in the experiments on solid fuels plasma gasification. It has been found that the synthesis gas content at about 97.4 vol.% can be produced. Comparison between the numerical and experimental results showed satisfactory agreement. 

  10. Pyrolysis and gasification of coal at high temperatures

    Energy Technology Data Exchange (ETDEWEB)

    Zygourakis, K.

    1992-02-10

    The macropore structure of chars is a major factor in determining their reactivity during the gasification stage. The major objectives of this contract were to (a) quantify by direct measurements the effect of pyrolysis conditions of the macropore structure, and (b) establish how the macropores affected the reactivity pattern, the ignition behavior and the fragmentation of the char particles during gasification in the regime of strong diffusional limitations. Results from this project provide much needed information on the factors that affect the quality of the solid products (chars) of coal utilization processes (for example, mild gasification processes). The reactivity data will also provide essential parameters for the optimal design of coal gasification processes. (VC)

  11. Advanced geophysical underground coal gasification monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Mellors, Robert; Yang, X.; White, J. A.; Ramirez, A.; Wagoner, J.; Camp, D. W.

    2014-07-01

    Underground Coal Gasification (UCG) produces less surface impact, atmospheric pollutants and greenhouse gas than traditional surface mining and combustion. Therefore, it may be useful in mitigating global change caused by anthropogenic activities. Careful monitoring of the UCG process is essential in minimizing environmental impact. Here we first summarize monitoring methods that have been used in previous UCG field trials. We then discuss in more detail a number of promising advanced geophysical techniques. These methods – seismic, electromagnetic, and remote sensing techniques – may provide improved and cost-effective ways to image both the subsurface cavity growth and surface subsidence effects. Active and passive seismic data have the promise to monitor the burn front, cavity growth, and observe cavity collapse events. Electrical resistance tomography (ERT) produces near real time tomographic images autonomously, monitors the burn front and images the cavity using low-cost sensors, typically running within boreholes. Interferometric synthetic aperture radar (InSAR) is a remote sensing technique that has the capability to monitor surface subsidence over the wide area of a commercial-scale UCG operation at a low cost. It may be possible to infer cavity geometry from InSAR (or other surface topography) data using geomechanical modeling. The expected signals from these monitoring methods are described along with interpretive modeling for typical UCG cavities. They are illustrated using field results from UCG trials and other relevant subsurface operations.

  12. Advanced Hydrogen Transport Membrane for Coal Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Schwartz, Joseph [Praxair, Inc., Tonawanda, NY (United States); Porter, Jason [Colorado School of Mines, Golden, CO (United States); Patki, Neil [Colorado School of Mines, Golden, CO (United States); Kelley, Madison [Colorado School of Mines, Golden, CO (United States); Stanislowski, Josh [Univ. of North Dakota, Grand Forks, ND (United States); Tolbert, Scott [Univ. of North Dakota, Grand Forks, ND (United States); Way, J. Douglas [Colorado School of Mines, Golden, CO (United States); Makuch, David [Praxair, Inc., Tonawanda, NY (United States)

    2015-12-23

    A pilot-scale hydrogen transport membrane (HTM) separator was built that incorporated 98 membranes that were each 24 inches long. This separator used an advanced design to minimize the impact of concentration polarization and separated over 1000 scfh of hydrogen from a hydrogen-nitrogen feed of 5000 scfh that contained 30% hydrogen. This mixture was chosen because it was representative of the hydrogen concentration expected in coal gasification. When tested with an operating gasifier, the hydrogen concentration was lower and contaminants in the syngas adversely impacted membrane performance. All 98 membranes survived the test, but flux was lower than expected. Improved ceramic substrates were produced that have small surface pores to enable membrane production and large pores in the bulk of the substrate to allow high flux. Pd-Au was chosen as the membrane alloy because of its resistance to sulfur contamination and good flux. Processes were developed to produce a large quantity of long membranes for use in the demonstration test.

  13. Steam and air plasma gasification of bituminous coal and petrocoke

    OpenAIRE

    Vladimir Messerle; Alexander Ustimenko

    2012-01-01

    This paper presents a numerical analysis and experimental investigation of two very different solid fuels, low-rank bituminous coal of 40 % ash content and petrocoke of 3 % ash content, gasification under steam and air plasma conditions with an aim of producing synthesis gas. Numerical analysis was fulfilled using the software package TERRA for equilibrium computation. Using the results of the numerical simulation, experiments on plasma steam gasification of the petrocoke and air and steam ga...

  14. Utilization of chemical looping strategy in coal gasification processes

    Institute of Scientific and Technical Information of China (English)

    Liangshih Fan; Fanxing Li; Shwetha Ramkumar

    2008-01-01

    Three chemical looping gasification processes, i. e. Syngas Chemical Looping (SCL) process, Coal Direct Chemical Looping (CDCL) process, and Calcium Looping process (CLP), are being developed at the Ohio State University (OSU). These processes utilize simple reaction schemes to convert carbonaceous fuels into products such as hydrogen, electricity, and synthetic fuels through the transformation of a highly reactive, highly recyclable chemical intermediate. In this paper, these novel chemical looping gasification processes are described and their advantages and potential challenges for commercialization are discussed.

  15. Hydrogen production by coal plasma gasification for fuel cell technology

    Energy Technology Data Exchange (ETDEWEB)

    Galvita, V. [Max-Planck-Institute, Dynamics of Complex Technical Systems, Sandtorstrasse 1, 39106, Magdeburg (Germany); Messerle, V.E.; Ustimenko, A.B. [Research Department of Plasmotechnics, 22 Zvereva str., 050100 Almaty (Kazakhstan)

    2007-11-15

    Coal gasification in steam and air atmosphere under arc plasma conditions has been investigated with Podmoskovnyi brown coal, Kuuchekinski bituminous coal and Canadian petrocoke. It was found that for those coals the gasification degree to synthesis gas were 92.3%, 95.8 and 78.6% correspondingly. The amount of produced syngas was 30-40% higher in steam than in air gasification of the coal. The reduction of the carbon monoxide content in the hydrogen-rich reformate gas for low-temperature fuel cell applications normally involves high- and low-temperature water gas shift reactors followed by selective oxidation of residual carbon monoxide. It is shown that the carbon monoxide content can be reduced in one single reactor, which is based on an iron redox cycle. During the reduction phase of the cycle, the raw gas mixture of H{sub 2} and CO reduces a Fe{sub 3}O{sub 4}-CeO{sub 2}-ZrO{sub 2} sample, while during the oxidation phase steam re-oxidizes the iron and simultaneously hydrogen is being produced. The integration of the redox iron process with a coal plasma gasification technology in future allows the production of CO{sub x}-free hydrogen. (author)

  16. Development program to support industrial coal gasification. Quarterly report 1

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-15

    The Development Program to Support Industrial Coal Gasification is on schedule. The efforts have centered on collecting background information and data, planning, and getting the experimental program underway. The three principal objectives in Task I-A were accomplished. The technical literature was reviewed, the coals and binders to be employed were selected, and tests and testing equipment to be used in evaluating agglomerates were developed. The entire Erie Mining facility design was reviewed and a large portion of the fluidized-bed coal gasification plant design was completed. Much of the work in Task I will be experimental. Wafer-briquette and roll-briquette screening tests will be performed. In Task II, work on the fluidized-bed gasification plant design will be completed and work on a plant design involving entrained-flow gasifiers will be initiated.

  17. Flow Simulation and Optimization of Plasma Reactors for Coal Gasification

    Institute of Scientific and Technical Information of China (English)

    冀春俊; 张英姿; 马腾才

    2003-01-01

    This paper reports a 3-d numerical simulation system to analyze the complicatedflow in plasma reactors for coal gasification, which involve complex chemical reaction, two-phaseflow and plasma effect. On the basis of analytic results, the distribution of the density, tempera-ture and components' concentration are obtained and a different plasma reactor configuration isproposed to optimize the flow parameters. The numerical simulation results show an improvedconversion ratio of the coal gasification. Different kinds of chemical reaction models are used tosimulate the complex flow inside the reactor. It can be concluded that the numerical simulationsystem can be very useful for the design and optimization of the plasma reactor.

  18. Flow Simulation and Optimization of Plasma Reactors for Coal Gasification

    Science.gov (United States)

    Ji, Chunjun; Zhang, Yingzi; Ma, Tengcai

    2003-10-01

    This paper reports a 3-d numerical simulation system to analyze the complicated flow in plasma reactors for coal gasification, which involve complex chemical reaction, two-phase flow and plasma effect. On the basis of analytic results, the distribution of the density, temperature and components' concentration are obtained and a different plasma reactor configuration is proposed to optimize the flow parameters. The numerical simulation results show an improved conversion ratio of the coal gasification. Different kinds of chemical reaction models are used to simulate the complex flow inside the reactor. It can be concluded that the numerical simulation system can be very useful for the design and optimization of the plasma reactor.

  19. Fixed-bed gasification research using US coals. Volume 3. Gasification of Rosebud sub-bituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-03-31

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the third volume in a series of documents prepared by Black, Sivalls and Bryson, Incorporated and describes the gasification of Rosebud subbituminous coal during the time period November 2-20, 1982. Test results and data are presented for the gasification of the coal and the operation of a slipstream tar scrubber to cool the gas and remove condensed tar. 5 refs., 29 figs., 18 tabs.

  20. Fixed-bed gasification research using US coals. Volume 12. Gasification of Absaloka/Robinson subbituminous coal

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a cooperative effort by private industrial particpants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the twelfth volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. this specific reports describes the gasification of Absaloka/Robinson subbituminous coal. This volume covers the test period June 18, 1984 to June 30, 1984. 4 refs., 20 figs., 18 tabs.

  1. Dry coal feeder development program at Ingersoll-Rand Research, Incorporated. [for coal gasification systems

    Science.gov (United States)

    Mistry, D. K.; Chen, T. N.

    1977-01-01

    A dry coal screw feeder for feeding coal into coal gasification reactors operating at pressures up to 1500 psig is described. Results on the feeder under several different modes of operation are presented. In addition, three piston feeder concepts and their technical and economical merits are discussed.

  2. Co-gasification of oil sand coke with coal

    Energy Technology Data Exchange (ETDEWEB)

    Vejahati, Farshid; Gupta, Rajender [Alberta Univ., Edmonton, AB (Canada). Dept. of Chemical and Materials Engineering

    2013-07-01

    Gasification of oil sand delayed coke with sub-bituminous and lignite coals was performed in an atmospheric entrained flow gasifier using steam and oxygen as gasifying agents. The underlying objective of this work was to assess the effects of the operating variables (i.e. temperature, oxygen and steam concentrations) and coal/coke blending ratio on gasification performance in a high-temperature in order to find the possible synergies in co-gasification of the fuels. Experiments were conducted at 1,400 C, using steam and oxygen to carbon weight ratios of (0.36-1.08) and (0.07-0.2), respectively in N{sub 2} carrier gas. The coke to coal weight ratios of 1/3, 1/2, and 2/3 were used for the blending tests. Particle size of 53-90 {mu}m with d{sub 50} = 75 {mu}m were used. In terms of char reactivity, blending did not show any significant positive effect. Slight deviations from linear additive line are in the order of experiment error. Gasification efficiency was also following a linear additive trend once more pointing out the lack of synergy in entrained flow gasification systems. The results however, showed that higher coke content clearly favored the H{sub 2} production.

  3. Comparison of an Internal Combustion Engine Derating Operated on Producer Gas from Coal and Biomass Gasification

    Directory of Open Access Journals (Sweden)

    Muhammad Ade Andriansyah Efendi

    2016-06-01

    Full Text Available Gasification is an effective and clean way to convert coal and biomass into useful fuels and chemical feedstocks. Producer gas utilization for internal combustion engine has been studied, not only from biomass gasification but also from coal gasification. This paper compares the research that has done author using coal gasification with other research results using biomass gasification. Coal gasifier performance test conducted with capacity of 20 kg/h coal. The proximate and ultimate analysis of raw coal, ash product and producer gas was conducted and comparised. The result of analysis shows that the efficiency of the coal gasification was 61% while range of gasifier efficiency for biomass is between 50-80%. Meanwhile, the experimental results on the performance of internal combustion engines using gas producer shows that the derating for power generation using coal producer gas was 46% and biomass was 20-50% depend on compression ratio of engine and characteristic of producer gas. 

  4. In-situ coal gasification as a progressive coal utilization method

    Energy Technology Data Exchange (ETDEWEB)

    Petrenko, E.V.; Saltykov, I.F.

    1988-02-01

    Describes the Podzemgaz coal gasification station at Angren that was put into operation in 1961. It exploits a 15 m thick and 120-250 m deep seam of brown coal. Technology of in-situ coal gasification is described and its results are compared in regard to cost and efficiency with the results of conventional surface mining. Air blowing is used for most in-situ coal gasification in USSR. Trials using air enriched in oxygen for this purpose were conducted in 1953 and 1957 but did not find wider application. A station using oxygen enrichment technology is planned for Angren at the Apartak section, as cheaper oxygen production methods have emerged. A new concept for in-situ coal gasification using membrane technology (molecular sieves) is set out. This technology assures total chemical and power utilization of coal, yielding not only coal gas but also liquid nitrogen, hydrogen, a mixture of both these gases for ammonia production, and carbonic acid. Prospective site selection for in-situ coal gasification stations is discussed and conditions required for the respective coalfields are outlined.

  5. Sinopec and Shell Launch Their First Coal Gasification Joint Venture

    Institute of Scientific and Technical Information of China (English)

    Cheng Lixin

    2001-01-01

    @@ (Nov. 2, 2001, Beijing)Shell China BV(50 per cent) and Sinopec Corp. (50per cent) today signed a co-operation agreement to form a joint venture to construct and operate a US$ 136 million coal gasification project in Yueyang,Hunan Province.

  6. Optimization Review, Fairfield Coal Gasification Plant Superfund Site, Fairfield, Iowa

    Science.gov (United States)

    The Fairfield Coal Gasification Plant (FCGP) also known as the Fairfield Former Manufactured Gas Plant (MGP) is located in the southwest 1/4 of the southeast 1/4, Section 26, Township 72 North, Range 10 West of Jefferson County, Iowa.

  7. Coal Chemical Gasification Process Schedule Control%煤气化工艺研究

    Institute of Scientific and Technical Information of China (English)

    李振

    2015-01-01

    介绍了Lurgi炉固定床加压气化、Texaco水煤浆加压气化、Shell 煤气化工艺和 GSP 粉煤气化工艺4种煤气化工艺,阐述了Shell 煤气化工艺和 GSP 粉煤气化工艺的工艺流程,并对其进行了技术分析。%Introduces the Lurgi fixed bed gasification furnace,Texaco coal-water slurry gasification,Shell coal gasifica-tion Process,GSP coal gasification process four kinds of coal gasification process,and which elaborates technical character-istics and process of coal gasification process control of Shell coal gasification process and GSP process.

  8. Investigating the Integration of a Solid Oxide Fuel Cell and a Gas Turbine System with Coal Gasification Technologies

    Science.gov (United States)

    2001-09-01

    conceptually integrate the hybrid power system with existing and imminent coal gasification technologies. The gasification technologies include the Kellogg...Brown Root (KBR) Transport Reactor and entrained coal gasification . Parametric studies will be performed wherein pertinent fuel cell stack process...dependent variables of interest. Coal gasification data and a proven SOFC model will be used to test the theoretical integration. Feasibility and

  9. Effect of petroleum coke addition on coal gasification

    Science.gov (United States)

    Sinnathambi, Chandra Mohan; Najib, Nur Khadijah Mohamad

    2014-10-01

    The main fuel for power generation is combustion of coal and/or natural gas. Natural gas is expensive but clean and less problematic, whereas coal is the reverse of natural gas. Natural gas resources are expected to last until 2020 where else coal has another 200 years expectancy. To replace the natural gas, synthetic gas (syngas) can be used as a substitute fuel. Syngas can be produced using coal as fuel. In this study we blend petcoke, a cheap solid carboneous fuel as an alternative to coal for the production of syngas using a 30 Kwattheat bubbling fluidized bed gasifier. The equivalent ratio (ER) was set at 2.8 and a gasification temperature was maintained between 680 to 710°C by manipulating between the feed flow rates and fluidizing medium. This condition was chosen as it proved to be the optimum based on the work by the same group. Various blend of coal:petcoke between 0 to 100% was analyzed. It was found that a 20:80, petcoke to coal gives a good correlation with 100% coal gasification.

  10. Entrained flow gasification of coal/bio-oil slurries

    DEFF Research Database (Denmark)

    Feng, Ping; Lin, Weigang; Jensen, Peter Arendt;

    2016-01-01

    Coal/bio-oil slurry (CBS) is a new partial green fuel for bio-oil utilization. CBS reacts with gasification agents at high temperatures and converts into hydrogen and carbon monoxide. This paper provides a feasibility study for the gasification of CBS in an atmospheric entrained flow reactor...... for syngas production. Experiments have shown that CBS can be successfully processed and gasified in the entrained flow reactor to produce syngas with almost no tar content and low residual carbon formation. High reactor temperature and steam/carbon ratio is favourable for H2 production. At 1400 °C...

  11. Coal gasification systems engineering and analysis. Volume 1: Executive summary

    Science.gov (United States)

    1980-01-01

    Feasibility analyses and systems engineering studies for a 20,000 tons per day medium Btu (MBG) coal gasification plant to be built by TVA in Northern Alabama were conducted. Major objectives were as follows: (1) provide design and cost data to support the selection of a gasifier technology and other major plant design parameters, (2) provide design and cost data to support alternate product evaluation, (3) prepare a technology development plan to address areas of high technical risk, and (4) develop schedules, PERT charts, and a work breakdown structure to aid in preliminary project planning. Volume one contains a summary of gasification system characterizations. Five gasification technologies were selected for evaluation: Koppers-Totzek, Texaco, Lurgi Dry Ash, Slagging Lurgi, and Babcock and Wilcox. A summary of the trade studies and cost sensitivity analysis is included.

  12. Production of synthetic hydrocarbons from coal through its underground gasification

    Institute of Scientific and Technical Information of China (English)

    Kreynin Efim Vulfovich

    2013-01-01

    The problem of the high-level processing of coal into synthetic motor fuels assumes worldwide actual meaning nowadays.Thereat,it is important especially for countries and regions which possess extensive coal resources and are forced to be guided by the import of liquid and gas hydrocarbons.However,a greater emphasis is paid to the given issue in Russia-The development of the federal program for highlevel processing of coal into synthetic motor fuels was initiated.This article describes options of underground coal gasification (UCG) use for the generation of hydrocarbons from UCG gas in the process of the Fischer-Tropsch synthesis (FTS).The technical and economic analysis of the integrated UCG-FTS powerchemical factories has detected their investment attractiveness and practicability of experimental-industrial testing at coal deposits of the Russian Federation.

  13. Wabash River Coal Gasification Repowering Project: A DOE Assessment

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2002-01-15

    The goal of the U.S. Department of Energy (DOE) Clean Coal Technology Program (CCT) is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have developed beyond the proof-of-concept stage. This document serves as a DOE post-project assessment (PPA) of a project selected in CCT Round IV, the Wabash River Coal Gasification Repowering (WRCGR) Project, as described in a Report to Congress (U.S. Department of Energy 1992). Repowering consists of replacing an existing coal-fired boiler with one or more clean coal technologies to achieve significantly improved environmental performance. The desire to demonstrate utility repowering with a two-stage, pressurized, oxygen-blown, entrained-flow, integrated gasification combined-cycle (IGCC) system prompted Destec Energy, Inc., and PSI Energy, Inc., to form a joint venture and submit a proposal for this project. In July 1992, the Wabash River Coal Gasification Repowering Project Joint Venture (WRCGRPJV, the Participant) entered into a cooperative agreement with DOE to conduct this project. The project was sited at PSI Energy's Wabash River Generating Station, located in West Terre Haute, Indiana. The purpose of this CCT project was to demonstrate IGCC repowering using a Destec gasifier and to assess long-term reliability, availability, and maintainability of the system at a fully commercial scale. DOE provided 50 percent of the total project funding (for capital and operating costs during the demonstration period) of $438 million.

  14. Moving Bed Gasification of Low Rank Alaska Coal

    Directory of Open Access Journals (Sweden)

    Mandar Kulkarni

    2012-01-01

    Full Text Available This paper presents process simulation of moving bed gasifier using low rank, subbituminous Usibelli coal from Alaska. All the processes occurring in a moving bed gasifier, drying, devolatilization, gasification, and combustion, are included in this model. The model, developed in Aspen Plus, is used to predict the effect of various operating parameters including pressure, oxygen to coal, and steam to coal ratio on the product gas composition. The results obtained from the simulation were compared with experimental data in the literature. The predicted composition of the product gas was in general agreement with the established results. Carbon conversion increased with increasing oxygen-coal ratio and decreased with increasing steam-coal ratio. Steam to coal ratio and oxygen to coal ratios impacted produced syngas composition, while pressure did not have a large impact on the product syngas composition. A nonslagging moving bed gasifier would have to be limited to an oxygen-coal ratio of 0.26 to operate below the ash softening temperature. Slagging moving bed gasifiers, not limited by operating temperature, could achieve carbon conversion efficiency of 99.5% at oxygen-coal ratio of 0.33. The model is useful for predicting performance of the Usibelli coal in a moving bed gasifier using different operating parameters.

  15. Study on the structure and gasification characteristics of selected South African bituminous coals in fluidised bed gasification

    CSIR Research Space (South Africa)

    Oboirien, BO

    2011-04-01

    Full Text Available The gasification characteristics of three South African bituminous coals were investigated in a bubbling fluidised bed reactor. The three coals are similar in rank, but two are inertinite-rich coals and the third has a high vitrinite content...

  16. An overview of the geological controls in underground coal gasification

    Science.gov (United States)

    Mohanty, Debadutta

    2017-07-01

    Coal’s reign will extend well into this millennium as the global demand for coal is expected to increase on average by 2-1% per year through 2019. Enhanced utilization of the domestic coal resource through clean coal technologies is necessary to meet the energy needs while achieving reduced emissions. Underground coal gasification (UCG) is one of such potential technologies. Geology of the area plays decisive role throughout the life of a UCG project and imperative for every phase of the project cycle starting from planning, site selection, design to cessation of operations and restoration of the site. Impermeable over/underlying strata with low porosity and less deformation are most suitable for UCG processes as they act as seal between the coal seam and the surrounding aquifers while limiting the degree of subsidence. Inrush of excess water into the gasification chamber reduces the efficacy of the process and may even quench the reactions in progress. Presence of fresh water aquifer in the vicinity of target coal seam should be abandoned in order to avoid groundwater contamination. UCG is not a proven technology that is still evolving and there are risks that need to be monitored and managed. Effective shutdown programme should intend at minimising the post-burn contaminant generation by flushing out potential organic and inorganic contaminants from the underground strata and treating contaminants, and to restore ground water quality to near baseline conditions.

  17. CFD Analysis of Coal and Heavy Oil Gasification for Syngas Production

    DEFF Research Database (Denmark)

    Sreedharan, Vikram

    2012-01-01

    phases. Gasification consists of the processes of passive heating, devolatilization, volatiles oxidation, char gasification and gas phase reactions. Attention is given here to the chemical kinetics of the gasification processes. The coal gasification model has been validated for entrained-flow gasifiers...... dioxide is overestimated. The deviation is fairly small, particularly for the improved chemical kinetics scheme. The heavy oil gasification model has been validated for a pilot-scale entrained-flow gasifier operating under different oxygen ratios. A gasification model similar to that developed for coal...... gasification is proposed for heavy oil gasification, using a single chemical kinetics scheme. Predictions of heavy oil gasification are rare in the literature, so that the present work holds some significance. The predictions of the temperature along the gasifier centerline and the species mole fractions...

  18. Research of Heating Rates Influence on Layer Coal Gasification of Krasnogorsky And Borodinsky Coal Deposit

    Directory of Open Access Journals (Sweden)

    Jankovskiy Stanislav

    2015-01-01

    Full Text Available Experimental research of heating rate influence on coal samples gasification process of Krasnogorsky and Borodinsky coal deposit ranks A and 2B was done to define optimal heating mode in high intensification of dispersal of inflammable gases conditions. Abundance ratio of carbon monoxide and nitrogen monoxide, water vapor, carbon dioxide at four values of heating rate within the range of 5 to 30 K/min. with further definition of optimal heating rate of coals was stated.

  19. Flow simulation and optimization of plasma reactors for coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Ji, C.J.; Zhang, Y.Z.; Ma, T.C. [Dalian University of Technology, Dalian (China). Power Engineering Dept.

    2003-10-01

    This paper reports a 3-D numerical simulation system to analyze the complicated flow in plasma reactors for coal gasification, which involve complex chemical reaction, two-phase flow and plasma effect. On the basis of analytic results, the distribution of the density, temperature and components' concentration are obtained and a different plasma reactor configuration is proposed to optimize the flow parameters. The numerical simulation results show an improved conversion ratio of the coal gasification. Different kinds of chemical reaction models are used to simulate the complex flow inside the reactor. It can be concluded that the numerical simulation system can be very useful for the design and optimization of the plasma reactor.

  20. Proceedings of second annual underground coal gasification symposium

    Energy Technology Data Exchange (ETDEWEB)

    Shuck, L Z [ed.

    1976-01-01

    The Second Annual Underground Coal Gasification Symposium was sponsored by the Morgantown Energy Research Center of the US Energy Research and Development Administration and held at Morgantown, WV, August 10-12, 1976. Fifty papers of the proceedings have been entered individually into EDB and ERA. While the majority of the contribution involved ERDA's own work in this area, there were several papers from universities, state organizations, (industrial, engineering or utility companies) and a few from foreign countries. (LTN)

  1. Engineering support services for the DOE/GRI coal-gasification research program. Monthly technical progress report, 22 August - 25 September, 1981

    Energy Technology Data Exchange (ETDEWEB)

    Bostwick, L.E.; Ethridge, T.R.; Starr, D.W.; Hubbard, D.A.; Koneru, P.B.; Smith, M.R.; Ward, W.E.; Wong, E.W.

    1982-01-01

    The objective of this contract is to provide engineering support services to the Department of Energy/Gas Research Institute in the high Btu coal gasification research program. The gasification research program is to determine the specific process and/or combination of component processing steps that offer the greatest economic potential for commercial application. During September, Kellogg continued active monitoring of operations at Westinghouse, IGT, Peatgas, and BI-GAS. Efforts relative to Hygas, Rockwell, Exxon and Bell were minimal. Test runs monitored and reported here are BI-GAS tests 17E and 17F, Westinghouse PDU test TP-028-3, and IGT Peatgas test 3. Kellog attended meetings on 1 and 22 September to discuss the review of the Hygas final report. Comments on Kellogg's draft report on the Hygas data base evaluation were received. Kellogg's evaluations of PDU operating data from Westinghouse and Exxon continues. The Kellogg report on Peatgas PDU data base evaluation was issued in draft form. At DOE's request, Kellogg began work on an evaluation of the existing data base (by IGT) for single-stage gasification of peat. Work on the descriptive brochure continued, aimed toward issue of a draft in the near future. Kellogg also provided input regarding Westinghouse test runs to a DOE consultant.

  2. Gasification of high ash, high ash fusion temperature bituminous coals

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Guohai; Vimalchand, Pannalal; Peng, WanWang

    2015-11-13

    This invention relates to gasification of high ash bituminous coals that have high ash fusion temperatures. The ash content can be in 15 to 45 weight percent range and ash fusion temperatures can be in 1150.degree. C. to 1500.degree. C. range as well as in excess of 1500.degree. C. In a preferred embodiment, such coals are dealt with a two stage gasification process--a relatively low temperature primary gasification step in a circulating fluidized bed transport gasifier followed by a high temperature partial oxidation step of residual char carbon and small quantities of tar. The system to process such coals further includes an internally circulating fluidized bed to effectively cool the high temperature syngas with the aid of an inert media and without the syngas contacting the heat transfer surfaces. A cyclone downstream of the syngas cooler, operating at relatively low temperatures, effectively reduces loading to a dust filtration unit. Nearly dust- and tar-free syngas for chemicals production or power generation and with over 90%, and preferably over about 98%, overall carbon conversion can be achieved with the preferred process, apparatus and methods outlined in this invention.

  3. Gasification of high ash, high ash fusion temperature bituminous coals

    Science.gov (United States)

    Liu, Guohai; Vimalchand, Pannalal; Peng, WanWang

    2015-11-13

    This invention relates to gasification of high ash bituminous coals that have high ash fusion temperatures. The ash content can be in 15 to 45 weight percent range and ash fusion temperatures can be in 1150.degree. C. to 1500.degree. C. range as well as in excess of 1500.degree. C. In a preferred embodiment, such coals are dealt with a two stage gasification process--a relatively low temperature primary gasification step in a circulating fluidized bed transport gasifier followed by a high temperature partial oxidation step of residual char carbon and small quantities of tar. The system to process such coals further includes an internally circulating fluidized bed to effectively cool the high temperature syngas with the aid of an inert media and without the syngas contacting the heat transfer surfaces. A cyclone downstream of the syngas cooler, operating at relatively low temperatures, effectively reduces loading to a dust filtration unit. Nearly dust- and tar-free syngas for chemicals production or power generation and with over 90%, and preferably over about 98%, overall carbon conversion can be achieved with the preferred process, apparatus and methods outlined in this invention.

  4. Early Ideas in Underground Coal Gasification and Their Evolution

    Directory of Open Access Journals (Sweden)

    Alexander Y. Klimenko

    2009-06-01

    Full Text Available This article follows the development of early UCG (underground coal gasification ideas. Historical facts are discussed mainly from the technological perspective and early experiments in UCG are analyzed. Our search for the first successful UCG experiment brings to light a new finding, which was commonly overlooked in previous reviews. We also outline the key role that engineer and inventor A. G. Betts played in introducing technologies utilizing unmined coal; his original ideas are visible in the first successful UCG experiments and in modern UCG technology.

  5. Japan`s sunshine project. 17.. 1992 annual summary of coal liquefaction and gasification

    Energy Technology Data Exchange (ETDEWEB)

    1993-09-01

    This report describes the achievement of coal liquefaction and gasification technology development in the Sunshine Project for FY 1992. It presents the research and development of coal liquefaction which includes studies on reaction mechanism of coal liquefaction and catalysts for coal liquefaction, the research and development of coal gasification technologies which includes studies on gasification characteristics of various coals and improvement of coal gasification efficiency, the development of bituminous coal liquefaction which includes engineering, construction and operation of a bituminous coal liquefaction pilot plant and research by a process supporting unit (PSU), the development of brown coal liquefaction which includes research on brown coal liquefaction with a pilot plant and development of techniques for upgrading coal oil from brown coal, the development of common base technologies which includes development of slurry letdown valves and study on upgrading technology of coal-derived distillates, the development of coal-based hydrogen production technology with a pilot plant, the development of technology for entrained flow coal gasification, the assessment of coal hydrogasification, and the international co-operation. 4 refs., 125 figs., 39 tabs.

  6. The ENCOAL Mild Coal Gasification Project, A DOE Assessment

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2002-03-15

    This report is a post-project assessment of the ENCOAL{reg_sign} Mild Coal Gasification Project, which was selected under Round III of the U.S. Department of Energy (DOE) Clean Coal Technology (CCT) Demonstration Program. The CCT Demonstration Program is a government and industry cofunded technology development effort to demonstrate a new generation of innovative coal utilization processes in a series of commercial-scale facilities. The ENCOAL{reg_sign} Corporation, a wholly-owned subsidiary of Bluegrass Coal Development Company (formerly SMC Mining Company), which is a subsidiary of Ziegler Coal Holding Company, submitted an application to the DOE in August 1989, soliciting joint funding of the project in the third round of the CCT Program. The project was selected by DOE in December 1989, and the Cooperative Agreement (CA) was approved in September 1990. Construction, commissioning, and start-up of the ENCOAL{reg_sign} mild coal gasification facility was completed in June 1992. In October 1994, ENCOAL{reg_sign} was granted a two-year extension of the CA with the DOE, that carried through to September 17, 1996. ENCOAL{reg_sign} was then granted a six-month, no-cost extension through March 17, 1997. Overall, DOE provided 50 percent of the total project cost of $90,664,000. ENCOAL{reg_sign} operated the 1,000-ton-per-day mild gasification demonstration plant at Triton Coal Company's Buckskin Mine near Gillette, Wyoming, for over four years. The process, using Liquids From Coal (LFC{trademark}) technology originally developed by SMC Mining Company and SGI International, utilizes low-sulfur Powder River Basin (PRB) coal to produce two new fuels, Process-Derived Fuel (PDF{trademark}) and Coal-Derived Liquids (CDL{trademark}). The products, as alternative fuel sources, are capable of significantly lowering current sulfur emissions at industrial and utility boiler sites throughout the nation thus reducing pollutants causing acid rain. In support of this overall

  7. Fixed-bed gasification research using US coals. Volume 11. Gasification of Minnesota peat. [Peat pellets and peat sods

    Energy Technology Data Exchange (ETDEWEB)

    Thimsen, D.; Maurer, R.E.; Pooler, A.R.; Pui, D.; Liu, B.; Kittelson, D.

    1985-05-01

    A single-staged, fixed-bed Wellman-Galusha gasifier coupled with a hot, raw gas combustion system and scrubber has been used to gasify numerous coals from throughout the United States. The gasification test program is organized as a coooperative effort by private industrial participants and governmental agencies. The consortium of participants is organized under the Mining and Industrial Fuel Gas (MIFGa) Group. This report is the eleventh volume in a series of reports describing the atmospheric pressure, fixed-bed gasification of US coals. This specific report describes the gasification of peat pellets and peat sods during 3 different test periods. 2 refs., 20 figs., 13 tabs.

  8. Temporal measurements and kinetics of selenium release during coal combustion and gasification in a fluidized bed.

    Science.gov (United States)

    Shen, Fenghua; Liu, Jing; Zhang, Zhen; Yang, Yingju

    2016-06-05

    The temporal release of selenium from coal during combustion and gasification in a fluidized bed was measured in situ by an on-line analysis system of trace elements in flue gas. The on-line analysis system is based on an inductively coupled plasma optical emission spectroscopy (ICP-OES), and can measure concentrations of trace elements in flue gas quantitatively and continuously. The results of on-line analysis suggest that the concentration of selenium in flue gas during coal gasification is higher than that during coal combustion. Based on the results of on-line analysis, a second-order kinetic law r(x)=0.94e(-26.58/RT)(-0.56 x(2) -0.51 x+1.05) was determined for selenium release during coal combustion, and r(x)=11.96e(-45.03/RT)(-0.53 x(2) -0.56 x+1.09) for selenium release during coal gasification. These two kinetic laws can predict respectively the temporal release of selenium during coal combustion and gasification with an acceptable accuracy. Thermodynamic calculations were conducted to predict selenium species during coal combustion and gasification. The speciation of selenium in flue gas during coal combustion differs from that during coal gasification, indicating that selenium volatilization is different. The gaseous selenium species can react with CaO during coal combustion, but it is not likely to interact with mineral during coal gasification.

  9. Plasma-enhanced gasification of low-grade coals for compact power plants

    Science.gov (United States)

    Uhm, Han S.; Hong, Yong C.; Shin, Dong H.; Lee, Bong J.

    2011-10-01

    A high temperature of a steam torch ensures an efficient gasification of low-grade coals, which is comparable to that of high-grade coals. Therefore, the coal gasification system energized by microwaves can serve as a moderately sized power plant due to its compact and lightweight design. This plasma power plant of low-grade coals would be useful in rural or sparsely populated areas without access to a national power grid.

  10. Gas core reactors for coal gasification

    Science.gov (United States)

    Weinstein, H.

    1976-01-01

    The concept of using a gas core reactor to produce hydrogen directly from coal and water is presented. It is shown that the chemical equilibrium of the process is strongly in favor of the production of H2 and CO in the reactor cavity, indicating a 98% conversion of water and coal at only 1500 K. At lower temperatures in the moderator-reflector cooling channels the equilibrium strongly favors the conversion of CO and additional H2O to CO2 and H2. Furthermore, it is shown the H2 obtained per pound of carbon has 23% greater heating value than the carbon so that some nuclear energy is also fixed. Finally, a gas core reactor plant floating in the ocean is conceptualized which produces H2, fresh water and sea salts from coal.

  11. Stabilization of solid wastes from coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Hill, A.H.; Wangerow, J.R.; Rehmat, A. (Institute of Gas Technology, Chicago, IL (United States)); Banerjee, D.D. (Center for Research on Sulfur in Coal, Carterville, IL (United States))

    1991-01-01

    The sulfur compounds present in coal are converted to hydrogen sulfide when coal is gasified. To comply with environmental regulations, a high fraction of the sulfur must be removed from the product gas stream. Calcium-based sorbents are the prime candidates for in-bed capture of sulfur. The removal of sulfur takes place through the reaction of hydrogen sulfide with calcium-based sorbent and produces calcium sulfide, which is not stable and therefore not suitable for disposal. Calcium sulfide, however, can be reacted with oxygen to produce stable and environmentally acceptable compounds for disposal. This paper addresses the results of a basic research program undertaken to determine the effects of operating variables on the successful stabilization of sulfide containing solid wastes from coal gasifiers.

  12. Stabilization of solid wastes from coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Hill, A.H.; Wangerow, J.R.; Rehmat, A. [Institute of Gas Technology, Chicago, IL (United States); Banerjee, D.D. [Center for Research on Sulfur in Coal, Carterville, IL (United States)

    1991-12-31

    The sulfur compounds present in coal are converted to hydrogen sulfide when coal is gasified. To comply with environmental regulations, a high fraction of the sulfur must be removed from the product gas stream. Calcium-based sorbents are the prime candidates for in-bed capture of sulfur. The removal of sulfur takes place through the reaction of hydrogen sulfide with calcium-based sorbent and produces calcium sulfide, which is not stable and therefore not suitable for disposal. Calcium sulfide, however, can be reacted with oxygen to produce stable and environmentally acceptable compounds for disposal. This paper addresses the results of a basic research program undertaken to determine the effects of operating variables on the successful stabilization of sulfide containing solid wastes from coal gasifiers.

  13. Gas core reactors for coal gasification

    Science.gov (United States)

    Weinstein, H.

    1976-01-01

    The concept of using a gas core reactor to produce hydrogen directly from coal and water is presented. It is shown that the chemical equilibrium of the process is strongly in favor of the production of H2 and CO in the reactor cavity, indicating a 98% conversion of water and coal at only 1500 K. At lower temperatures in the moderator-reflector cooling channels the equilibrium strongly favors the conversion of CO and additional H2O to CO2 and H2. Furthermore, it is shown the H2 obtained per pound of carbon has 23% greater heating value than the carbon so that some nuclear energy is also fixed. Finally, a gas core reactor plant floating in the ocean is conceptualized which produces H2, fresh water and sea salts from coal.

  14. Method for using fast fluidized bed dry bottom coal gasification

    Science.gov (United States)

    Snell, George J.; Kydd, Paul H.

    1983-01-01

    Carbonaceous solid material such as coal is gasified in a fast fluidized bed gasification system utilizing dual fluidized beds of hot char. The coal in particulate form is introduced along with oxygen-containing gas and steam into the fast fluidized bed gasification zone of a gasifier assembly wherein the upward superficial gas velocity exceeds about 5.0 ft/sec and temperature is 1500.degree.-1850.degree. F. The resulting effluent gas and substantial char are passed through a primary cyclone separator, from which char solids are returned to the fluidized bed. Gas from the primary cyclone separator is passed to a secondary cyclone separator, from which remaining fine char solids are returned through an injection nozzle together with additional steam and oxygen-containing gas to an oxidation zone located at the bottom of the gasifier, wherein the upward gas velocity ranges from about 3-15 ft/sec and is maintained at 1600.degree.-200.degree. F. temperature. This gasification arrangement provides for increased utilization of the secondary char material to produce higher overall carbon conversion and product yields in the process.

  15. UTILIZATION OF LIGHTWEIGHT MATERIALS MADE FROM COAL GASIFICATION SLAGS

    Energy Technology Data Exchange (ETDEWEB)

    Vas Choudhry; Stephen Kwan; Steven R. Hadley

    2001-07-01

    The objective of the project entitled ''Utilization of Lightweight Materials Made from Coal Gasification Slags'' was to demonstrate the technical and economic viability of manufacturing low-unit-weight products from coal gasification slags which can be used as substitutes for conventional lightweight and ultra-lightweight aggregates. In Phase I, the technology developed by Praxis to produce lightweight aggregates from slag (termed SLA) was applied to produce a large batch (10 tons) of expanded slag using pilot direct-fired rotary kilns and a fluidized bed calciner. The expanded products were characterized using basic characterization and application-oriented tests. Phase II involved the demonstration and evaluation of the use of expanded slag aggregates to produce a number of end-use applications including lightweight roof tiles, lightweight precast products (e.g., masonry blocks), structural concrete, insulating concrete, loose fill insulation, and as a substitute for expanded perlite and vermiculite in horticultural applications. Prototypes of these end-use applications were made and tested with the assistance of commercial manufacturers. Finally, the economics of expanded slag production was determined and compared with the alternative of slag disposal. Production of value-added products from SLA has a significant potential to enhance the overall gasification process economics, especially when the avoided costs of disposal are considered.

  16. Critical Analysis of Underground Coal Gasification Models. Part II: Kinetic and Computational Fluid Dynamics Models

    Directory of Open Access Journals (Sweden)

    Alina Żogała

    2014-01-01

    Originality/value: This paper presents state of art in the field of coal gasification modeling using kinetic and computational fluid dynamics approach. The paper also presents own comparative analysis (concerned with mathematical formulation, input data and parameters, basic assumptions, obtained results etc. of the most important models of underground coal gasification.

  17. Mathematical Modelling of the Fixed-Bed Biomass-Coal Co-Gasification Process

    Directory of Open Access Journals (Sweden)

    Donskoy Igor G.

    2016-01-01

    Full Text Available The paper considers mathematical modelling of downdraft fixed-bed gasification process of the mixtures of woody biomass and coal. Biomass/coal ratio, biomass moisture content and air equivalence ratio are varying parameters. Boundaries of the efficient gasification regimes are estimated.

  18. H sub 2 S removal from fuel gas during coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Rehmat, A. (Institute of Gas Technology, Chicago, IL (USA)); Leppin, D. (Gas Research Institute, Chicago, IL (USA)); Banerjee, D.D. (Center for Research on Sulfur in Coal, Carterville, IL (USA))

    1990-01-01

    Work on the desulfurization reactions in the literature has not sufficiently addressed the reaction conditions in the context of coal gasification processes and the kinetics of the sulfidation reaction at the gasification conditions. This study, which was jointly funded by the Gas Research institute and the State of Illinois Center for Research on sulfur in Coal (CRSC), was undertaken to obtain comprehensive experimental data on the sulfidation reactions at gasification conditions to determine the kinetics of this gas/solid reaction.

  19. Coal gasification in Spain. Experience and future

    Energy Technology Data Exchange (ETDEWEB)

    Francisco Garcia Pena; Pedro Casero Cabezon; Maria Belen Garcia Garcia

    2005-07-01

    The article reports the present status of the Puertollano IGCC Power Plant, which is the largest coal IGCC power plant. Operating results of this plant is presented with the aim of showing that the advantages of this technology are tangible, and that also the obstacles that hinder the deployment of this technology are fading away. 7 figs., 4 tabs.

  20. Encoal mild coal gasification project: Commercial plant feasibility study

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    In order to determine the viability of any Liquids from Coal (LFC) commercial venture, TEK-KOL and its partner, Mitsubishi Heavy Industries (MHI), have put together a technical and economic feasibility study for a commercial-size LFC Plant located at Zeigler Coal Holding Company`s North Rochelle Mine site. This resulting document, the ENCOAL Mild Coal Gasification Plant: Commercial Plant Feasibility Study, includes basic plant design, capital estimates, market assessment for coproducts, operating cost assessments, and overall financial evaluation for a generic Powder River Basin based plant. This document and format closely resembles a typical Phase II study as assembled by the TEK-KOL Partnership to evaluate potential sites for LFC commercial facilities around the world.

  1. An analysis of new generation coal gasification projects

    Institute of Scientific and Technical Information of China (English)

    Kreynin Efim Vulfovich

    2012-01-01

    The global trends of increasing oil and gas costs have compelled coal possessing countries to start long term underground coal gasification (UCG) projects.These enhance national energy security and are among the cleanest,ecologically safest coal utilization technologies.This paper delineates the major characteristics of such technologies and analyzes technical solutions.Highlighting the desire to develop large scale industrial UCG plants,pilot level projects are presented using a new UCG method developed in Russia by Joint Stock Company Gazprom Promgaz.This method is distinct for its high controllability,stability,and energy efficiency.New,efficient technical solutions have been developed over the last 10-15 years and are patented in Russia.They guarantee controllability and stability of UCG gas production.Over one hundred injection and gas production wells have been operated simultaneously.

  2. Using Mathematica software for coal gasification simulations – Selected kinetic model application

    Directory of Open Access Journals (Sweden)

    Sebastian Iwaszenko

    2015-01-01

    Full Text Available Coal gasification is recognized as a one of promising Clean Coal Technologies. As the process itself is complicated and technologically demanding, it is subject of many research. In the paper a problem of using volumetric, non-reactive core and Johnson model for coal gasification and underground coal gasification is considered. The usage of Mathematica software for models' equations solving and analysis is presented. Coal parameters were estimated for five Polish mines: Piast, Ziemowit, Janina, Szczygłowice and Bobrek. For each coal the models' parameters were determined. The determination of parameters was based on reactivity assessment for 50% char conversion. The calculations show relatively small differences between conversion predicted by volumetric and non reactive core model. More significant differences were observed for Johnson model, but they do not exceeded 10% for final char conversion. The conceptual model for underground coal gasification was presented.

  3. Gasification Characteristics of Coal/Biomass Mixed Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Reginald

    2013-09-30

    A research project was undertaken that had the overall objective of developing the models needed to accurately predict conversion rates of coal/biomass mixtures to synthesis gas under conditions relevant to a commercially-available coal gasification system configured to co- produce electric power as well as chemicals and liquid fuels. In our efforts to accomplish this goal, experiments were performed in an entrained flow reactor in order to produce coal and biomass chars at high heating rates and temperatures, typical of the heating rates and temperatures fuel particles experience in real systems. Mixed chars derived from coal/biomass mixtures containing up to 50% biomass and the chars of the pure coal and biomass components were subjected to a matrix of reactivity tests in a pressurized thermogravimetric analyzer (TGA) in order to obtain data on mass loss rates as functions of gas temperature, pressure and composition as well as to obtain information on the variations in mass specific surface area during char conversion under kinetically-limited conditions. The experimental data were used as targets when determining the unknown parameters in the chemical reactivity and specific surface area models developed. These parameters included rate coefficients for the reactions in the reaction mechanism, enthalpies of formation and absolute entropies of adsorbed species formed on the carbonaceous surfaces, and pore structure coefficients in the model used to describe how the mass specific surface area of the char varies with conversion. So that the reactivity models can be used at high temperatures when mass transport processes impact char conversion rates, Thiele modulus – effectiveness factor relations were also derived for the reaction mechanisms developed. In addition, the reactivity model and a mode of conversion model were combined in a char-particle gasification model that includes the effects of chemical reaction and diffusion of reactive gases through particle

  4. Wabash River Coal Gasification Repowering Project: A DOE Assessment

    Energy Technology Data Exchange (ETDEWEB)

    National Energy Technology Laboratory

    2002-01-15

    The goal of the U.S. Department of Energy (DOE) Clean Coal Technology Program (CCT) is to furnish the energy marketplace with a number of advanced, more efficient, and environmentally responsible coal utilization technologies through demonstration projects. These projects seek to establish the commercial feasibility of the most promising advanced coal technologies that have developed beyond the proof-of-concept stage. This document serves as a DOE post-project assessment (PPA) of a project selected in CCT Round IV, the Wabash River Coal Gasification Repowering (WRCGR) Project, as described in a Report to Congress (U.S. Department of Energy 1992). Repowering consists of replacing an existing coal-fired boiler with one or more clean coal technologies to achieve significantly improved environmental performance. The desire to demonstrate utility repowering with a two-stage, pressurized, oxygen-blown, entrained-flow, integrated gasification combined-cycle (IGCC) system prompted Destec Energy, Inc., and PSI Energy, Inc., to form a joint venture and submit a proposal for this project. In July 1992, the Wabash River Coal Gasification Repowering Project Joint Venture (WRCGRPJV, the Participant) entered into a cooperative agreement with DOE to conduct this project. The project was sited at PSI Energy's Wabash River Generating Station, located in West Terre Haute, Indiana. The purpose of this CCT project was to demonstrate IGCC repowering using a Destec gasifier and to assess long-term reliability, availability, and maintainability of the system at a fully commercial scale. DOE provided 50 percent of the total project funding (for capital and operating costs during the demonstration period) of $438 million. Construction for the demonstration project was started in July 1993. Pre-operational tests were initiated in August 1995, and construction was completed in November 1995. Commercial operation began in November 1995, and the demonstration period was completed in

  5. Prediction of cavity growth rate during underground coal gasification using multiple regression analysis

    Institute of Scientific and Technical Information of China (English)

    Mehdi Najafi; Seyed Mohammad Esmaiel Jalali; Reza KhaloKakaie; Farrokh Forouhandeh

    2015-01-01

    During underground coal gasification (UCG), whereby coal is converted to syngas in situ, a cavity is formed in the coal seam. The cavity growth rate (CGR) or the moving rate of the gasification face is affected by controllable (operation pressure, gasification time, geometry of UCG panel) and uncontrollable (coal seam properties) factors. The CGR is usually predicted by mathematical models and laboratory experiments, which are time consuming, cumbersome and expensive. In this paper, a new simple model for CGR is developed using non-linear regression analysis, based on data from 11 UCG field trials. The empirical model compares satisfactorily with Perkins model and can reliably predict CGR.

  6. Study on CO2 gasification reactivity and physical characteristics of biomass, petroleum coke and coal chars.

    Science.gov (United States)

    Huo, Wei; Zhou, Zhijie; Chen, Xueli; Dai, Zhenghua; Yu, Guangsuo

    2014-05-01

    Gasification reactivities of six different carbonaceous material chars with CO2 were determined by a Thermogravimetric Analyzer (TGA). Gasification reactivities of biomass chars are higher than those of coke and coal chars. In addition, physical structures and chemical components of these chars were systematically tested. It is found that the crystalline structure is an important factor to evaluate gasification reactivities of different chars and the crystalline structures of biomass chars are less order than those of coke and coal chars. Moreover, initial gasification rates of these chars were measured at high temperatures and with relatively large particle sizes. The method of calculating the effectiveness factor η was used to quantify the effect of pore diffusion on gasification. The results show that differences in pore diffusion effects among gasification with various chars are prominent and can be attributed to different intrinsic gasification reactivities and physical characteristics of different chars. Copyright © 2014 Elsevier Ltd. All rights reserved.

  7. Gasification Characteristics of Coal/Biomass Mixed Fuels

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, Reginald [Stanford Univ., CA (United States). Mechanical Engineering Dept.

    2014-09-01

    A research project was undertaken that had the overall objective of developing the models needed to accurately predict conversion rates of coal/biomass mixtures to synthesis gas under conditions relevant to a commercially-available coal gasification system configured to co-produce electric power as well as chemicals and liquid fuels. In our efforts to accomplish this goal, experiments were performed in an entrained flow reactor in order to produce coal and biomass chars at high heating rates and temperatures, typical of the heating rates and temperatures fuel particles experience in real systems. Mixed chars derived from coal/biomass mixtures containing up to 50% biomass and the chars of the pure coal and biomass components were subjected to a matrix of reactivity tests in a pressurized thermogravimetric analyzer (TGA) in order to obtain data on mass loss rates as functions of gas temperature, pressure and composition as well as to obtain information on the variations in mass specific surface area during char conversion under kinetically-limited conditions. The experimental data were used as targets when determining the unknown parameters in the chemical reactivity and specific surface area models developed. These parameters included rate coefficients for the reactions in the reaction mechanism, enthalpies of formation and absolute entropies of adsorbed species formed on the carbonaceous surfaces, and pore structure coefficients in the model used to describe how the mass specific surface area of the char varies with conversion. So that the reactivity models can be used at high temperatures when mass transport processes impact char conversion rates, Thiele modulus – effectiveness factor relations were also derived for the reaction mechanisms developed. In addition, the reactivity model and a mode of conversion model were combined in a char-particle gasification model that includes the effects of chemical reaction and diffusion of reactive gases through particle

  8. Geochemical Proxies for Enhanced Process Control of Underground Coal Gasification

    Science.gov (United States)

    Kronimus, A.; Koenen, M.; David, P.; Veld, H.; van Dijk, A.; van Bergen, F.

    2009-04-01

    Underground coal gasification (UCG) represents a strategy targeting at syngas production for fuel or power generation from in-situ coal seams. It is a promising technique for exploiting coal deposits as an energy source at locations not allowing conventional mining under economic conditions. Although the underlying concept has already been suggested in 1868 and has been later on implemented in a number of field trials and even at a commercial scale, UCG is still facing technological barriers, impeding its widespread application. Field UCG operations rely on injection wells enabling the ignition of the target seam and the supply with oxidants (air, O2) inducing combustion (oxidative conditions). The combustion process delivers the enthalpy required for endothermic hydrogen production under reduction prone conditions in some distance to the injection point. The produced hydrogen - usually accompanied by organic and inorganic carbon species, e.g. CH4, CO, and CO2 - can then be retrieved through a production well. In contrast to gasification of mined coal in furnaces, it is difficult to measure the combustion temperature directly during UCG operations. It is already known that geochemical parameters such as the relative production gas composition as well as its stable isotope signature are related to the combustion temperature and, consequently, can be used as temperature proxies. However, so far the general applicability of such relations has not been proven. In order to get corresponding insights with respect to coals of significantly different rank and origin, four powdered coal samples covering maturities ranging from Ro= 0.43% (lignite) to Ro= 3.39% (anthracite) have been gasified in laboratory experiments. The combustion temperature has been varied between 350 and 900 ˚ C, respectively. During gasification, the generated gas has been captured in a cryo-trap, dried and the carbon containing gas components have been catalytically oxidized to CO2. Thereafter, the

  9. Plasma-fuel systems for environment and economy indexes of pulverized coal incineration and gasification improvement

    Energy Technology Data Exchange (ETDEWEB)

    E. Karpenko; V. Messerle; A. Ustimenko [United Power System of Russia, Gusinoozersk (Russian Federation). Branch Centre of Plasma-Power Technologies of Russian J.S.Co.

    2003-07-01

    Coal is one of the main energy resources. To improve efficiency of coal incineration new plasma-energy technologies are developing. Steam-productivity 75t/h 670t/h boilers were tested for their starting up by plasma ignition of pulverized coal and flame stabilization. Laboratory (coal consumption to 20kg/h) and pilot (coal consumption 300kg/h and 32000kg/h) plasma gasification experiments are given. Plasma air and steam gasification of coal with its mineral mass utilization is studied. 8 refs., 10 figs., 4 tabs.

  10. A continuous two stage solar coal gasification system

    Science.gov (United States)

    Mathur, V. K.; Breault, R. W.; Lakshmanan, S.; Manasse, F. K.; Venkataramanan, V.

    The characteristics of a two-stage fluidized-bed hybrid coal gasification system to produce syngas from coal, lignite, and peat are described. Devolatilization heat of 823 K is supplied by recirculating gas heated by a solar receiver/coal heater. A second-stage gasifier maintained at 1227 K serves to crack remaining tar and light oil to yield a product free from tar and other condensables, and sulfur can be removed by hot clean-up processes. CO is minimized because the coal is not burned with oxygen, and the product gas contains 50% H2. Bench scale reactors consist of a stage I unit 0.1 m in diam which is fed coal 200 microns in size. A stage II reactor has an inner diam of 0.36 m and serves to gasify the char from stage I. A solar power source of 10 kWt is required for the bench model, and will be obtained from a central receiver with quartz or heat pipe configurations for heat transfer.

  11. Gasification in pulverized coal flames. Final report (Part I). Pulverized coal combustion and gasification in a cyclone reactor: experiment and model

    Energy Technology Data Exchange (ETDEWEB)

    Barnhart, J. S.; Laurendeau, N. M.

    1979-05-01

    A unified experimental and analytical study of pulverized coal combustion and low-BTU gasification in an atmospheric cyclone reactor was performed. Experimental results include several series of coal combustion tests and a coal gasification test carried out via fuel-rich combustion without steam addition. Reactor stability was excellent over a range of equivalence ratios from .67 to 2.4 and air flowrates from 60 to 220 lb/hr. Typical carbon efficiencies were 95% for air-rich and stoichiometric tests and 80% for gasification tests. The best gasification results were achieved at an equivalence ratio of 2.0, where the carbon, cold gas and hot gas efficiencies were 83, 45 and 75%, respectively. The corresponding product gas heating value was 70 BTU/scf. A macroscopic model of coal combustion in the cyclone has been developed. Fuel-rich gasification can also be modeled through a gas-phase equilibrium treatment. Fluid mechanics are modeled by a particle force balance and a series combination of a perfectly stirred reactor and a plug flow reactor. Kinetic treatments of coal pyrolysis, char oxidation and carbon monoxide oxidation are included. Gas composition and temperature are checked against equilibrium values. The model predicts carbon efficiency, gas composition and temperature and reactor heat loss; gasification parameters, such as cold and hot gas efficiency and make gas heating value, are calculated for fuel-rich conditions. Good agreement exists between experiment and theory for conditions of this investigation.

  12. Lock hopper values for coal gasification plant service

    Science.gov (United States)

    Schoeneweis, E. F.

    1977-01-01

    Although the operating principle of the lock hopper system is extremely simple, valve applications involving this service for coal gasification plants are likewise extremely difficult. The difficulties center on the requirement of handling highly erosive pulverized coal or char (either in dry or slurry form) combined with the requirement of providing tight sealing against high-pressure (possibly very hot) gas. Operating pressures and temperatures in these applications typically range up to 1600 psi (110bar) and 600F (316C), with certain process requirements going even higher. In addition, and of primary concern, is the need for reliable operation over long service periods with the provision for practical and economical maintenance. Currently available data indicate the requirement for something in the order of 20,000 to 30,000 open-close cycles per year and a desire to operate at least that long without valve failure.

  13. DIFFUSION COATINGS FOR CORROSION RESISTANT COMPONENTS IN COAL GASIFICATION SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Angel Sanjurjo

    2004-05-01

    Heat-exchangers, filters, turbines, and other components in integrated coal gasification combined cycle system must withstand demanding conditions of high temperatures and pressure differentials. Under the highly sulfiding conditions of the high temperature coal gas, the performance of components degrade significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy may improve is resistance to such sulfidation attack and decrease capital and operating costs. A review of the literature indicates that the corrosion reaction is the competition between oxidation and sulfidation reactions. The Fe- and Ni-based high-temperature alloys are susceptible to sulfidation attack unless they are fortified with high levels of Cr, Al, and Si. To impart corrosion resistance, these elements need not be in the bulk of the alloy and need only be present at the surface layers.

  14. Groundwater Management During Intermediate-to-Deep Underground Coal Gasification

    Science.gov (United States)

    Lavis, Shaun; Stanley, Edward; Mostade, Marc; Turner, Matthew

    2010-05-01

    Underground coal gasification (UCG) is a safe, economic way to extract energy from coal with significant environmental benefits compared with other coal-based energy production methods. However, in the wrong hands, UCG can adversely impact groundwater systems in two ways: 1) by contamination with inorganic and organic compounds; and 2) groundwater depletion. The hydrogeological conditions of UCG are highly site-specific and so the risks to groundwater have to be evaluated on a case-by-case basis. Site selection plays a fundamental role in managing these risks and it is possible to identify the general characteristics that will minimise risks of environmental impacts. However, large volumes of water, much of which will come from groundwater, are consumed during UCG projects, leading to possible significant groundwater depletion at such settings. Insufficient water supplies will impact the quality of the syngas produced by UCG because coal conversion efficiencies will decrease. Furthermore, depletion of groundwater levels may extend beyond the UCG site boundary, with consequent implications for regulatory regimes and any off-site groundwater users. Additional artificial water supplies may therefore be required, although the manner in which the water is delivered to the UCG system will also likely have an impact on syngas quality. Large volumes of water delivered via the injection well will likely impact gasification efficiency because 1) large amounts of heat will be used to vaporise the water leading to suppression of the reactor temperature and inhibition of (endothermic) gasification reactions; and 2) the "steam jacket" originally present around the UCG reactor will be absent, which will lead to further heat loss from the system. Additional water may therefore have to be supplied via the surrounding strata and/or coal seam, thus mimicking the natural conditions prior to groundwater depletion. Much of the hydrogeological modelling to date has focussed on a single

  15. Plasma aided coal gasification and the variables in this process

    Energy Technology Data Exchange (ETDEWEB)

    Pang, X.; Lu, Y.; Zhu, S. [Taiyuan University of Technology, Taiyuan (China)

    2005-12-15

    In order to investigate the characters of plasma aided coal gasification in the industry-scale equipment, the tests with changing feeding rate, steam output pressure, feeding gas flux, input power of plasma generator and the additives were carried out with Datong coal. The produced gas components were analyzed by gas chromatography. And the optimal process conditions, such as, the feeding rate of 150 g/min, the feeding gas flow of 18 m{sup 3}/h, the output power of plasma generator of 100 kW, the steam output pressure of 0.3 MPa are obtained. When the contents of CaO and CaCO{sub 3} in the whole feed are 10 and 5% respectively, the experimental data show their catalytic effect is the best. Considering the molar mass of CaO and CaCO{sub 3}, it is concluded that the catalytic effect of CaO is more important than the reduction of CO{sub 2} in the gasification. 12 refs., 2 figs., 3 tabs.

  16. Status of health and environmental research relative to coal gasification 1976 to the present

    Energy Technology Data Exchange (ETDEWEB)

    Wilzbach, K.E.; Reilly, C.A. Jr. (comps.)

    1982-10-01

    Health and environmental research relative to coal gasification conducted by Argonne National Laboratory, the Inhalation Toxicology Research Institute, and Oak Ridge National Laboratory under DOE sponsorship is summarized. The studies have focused on the chemical and toxicological characterization of materials from a range of process streams in five bench-scale, pilot-plant and industrial gasifiers. They also address ecological effects, industrial hygiene, environmental control technology performance, and risk assessment. Following an overview of coal gasification technology and related environmental concerns, integrated summaries of the studies and results in each area are presented and conclusions are drawn. Needed health and environmental research relative to coal gasification is identified.

  17. DIFFUSION COATINGS FOR CORROSION RESISTANT COMPONENTS IN COAL GASIFICATION SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Angel Sanjurjo

    2004-05-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy may improve is resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. A review of the literature indicated that the Fe- and Ni-based high-temperature alloys are susceptible to sulfidation attack unless they are fortified with high levels of Cr, Al, and Si. To impart corrosion resistance, these elements need not be in the bulk of the alloy and need only be present at the surface layers. We selected diffusion coatings of Cr and Al, and surface coatings of Si and Ti for the preliminary testing. These coatings will be applied using the fluidized bed chemical vapor deposition technique developed at SRI which is rapid and relatively inexpensive. We have procured coupons of typical alloys used in a gasifier. These coupons will be coated with Cr, Al, Si, and Ti. The samples will be tested in a bench-scale reactor using simulated coal gas compositions. In addition, we will be sending coated samples for insertion in the gas stream of the coal gasifier.

  18. CO2 Capture and Storage in Coal Gasification Projects

    Science.gov (United States)

    Rao, Anand B.; Phadke, Pranav C.

    2017-07-01

    concerns about climate change problem. Carbon Capture and Storage (CCS) is being considered as a promising carbon mitigation technology, especially for large point sources such as coal power plants. Gasification of coal helps in better utilization of this resource offering multiple advantages such as pollution prevention, product flexibility (syngas and hydrogen) and higher efficiency (combined cycle). It also enables the capture of CO2 prior to the combustion, from the fuel gas mixture, at relatively lesser cost as compared to the post-combustion CO2 capture. CCS in gasification projects is considered as a promising technology for cost-effective carbon mitigation. Although many projects (power and non-power) have been announced internationally, very few large-scale projects have actually come up. This paper looks at the various aspects of CCS applications in gasification projects, including the technical feasibility and economic viability and discusses an Indian perspective. Impacts of including CCS in gasification projects (e.g. IGCC plants) have been assessed using a simulation tool. Integrated Environmental Control Model (IECM) - a modelling framework to simulate power plants - has been used to estimate the implications of adding CCS units in IGCC plants, on their performance and costs.

  19. Biomass and waste gasification in pulverised coal-fired boilers

    Energy Technology Data Exchange (ETDEWEB)

    Nieminen, M.; Kurkela, E.; Palonen, J. [VTT Processes, Espoo (Finland)

    2004-07-01

    The replacement of coal in existing large pulverised coal-fired boilers is a cost-effective way to lower the CO{sub 2} emissions of power production. A power plant concept consisting of a gasifier connected to a large conventional boiler with a high efficiency steam cycle offers an attractive and efficient way house local biomass and waste sources in energy production. In the simplified concept clean biomass or waste is gasifier and gas is directly fed to PC boiler and co-combusted with coal. At Kymijarvi power plant in Lahti, Finland, 60 MW circulating fluidized bed gasifier was commissioned in early 1998 and has since then been in commercial operation replacing hard coal in a 360 MW{sub th} boiler producing power and district heat. The annual gasifier availability has been over 95% in each year and the Lahti plant has clearly demonstrated that the technology is technically proven and is able to reduce the emission of CO{sub 2}, SO{sub 2}, dust and NOx compared to coal-alone combustion. Contaminated biomass or waste fuels can also be utilised for replacing coal in large-scale PC boiler but most of the harmful contaminants have to be removed prior co-combustion of the gas. Product gas cleaning makes it possible to utilise even fuels with higher chlorine and metal contents. The dry gas cleaning methods have been tested at pilot scale and will be soon demonstrated in gasification plants designed for solid recovered fuels originating form household and industrial wastes. 5 refs., 4 figs., 5 tabs.

  20. Clean coal technology: gasification of South African coals - IFSA 2008

    CSIR Research Space (South Africa)

    Engelbrecht, AD

    2008-11-01

    Full Text Available Electricity demand in South Africa is increasing at a rate of 1000 MW per year. Whilst there is increasing pressure to adopt non-fossil fuel electricity generating technologies, the abundant reserves and low cost of coal make it the preferred energy...

  1. Clean coal technology: gasification of South African coals - 2nd CSIR Biennial Conference

    CSIR Research Space (South Africa)

    Engelbrecht, AD

    2008-11-01

    Full Text Available Induced draught IGCC Integrated Gasification Combined Cycle LPG Liquefied Petroleum Gas RI Roga Index TGA Thermogravimetric analyser/analysis 202 ACKNOWLEDGEMENTS The authors would like to extend their appreciation to: • The Council... stream has a low volume compared to flue gas resulting from conventional coal combustion, and therefore gas clean-up systems can be reduced in size. The cleaned gas is combusted in a gas turbine that produces electrical power while heat is recovered...

  2. Fluidised bed gasification of high-ash South African coals: An experimental and modelling study

    CSIR Research Space (South Africa)

    Engelbrecht, AS

    2011-11-01

    Full Text Available The gasification of two high-ash coals were studied using a pilot scale fluidised bed gasifier using oxygen enrich air and steam as the gasification agents. The results of the tests show that the fixed carbon conversion and calorific value increases...

  3. Coal gasification. Quarterly report, January-March 1979. [US DOE supported

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-01-01

    Progress in DOE-supported coal gasification pilot plant projects is reported: company, location, contract number, funding, process description, history and progress in the current quarter. Two support projects are discussed: preparation of a technical data book and mathematical modeling of gasification reactors. (LTN)

  4. Availability (energetic) analysis of coal gasification process. Pt. 1. Theoretical considerations

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P.; Conger, W.L.

    1981-10-01

    The concepts of availability, energy, and of exergetic efficiency are developed for use in evaluating coal gasification processes. The problem of defining the thermodynamic surroundings is discussed, and the approach of Bosnjakovic is used to select surroundings. In the second paper in this series the analysis is illustrated by applying it in evaluating the Synthane Gasification process. (13 refs.)

  5. Recent regulatory experience of low-Btu coal gasification. Volume III. Supporting case studies

    Energy Technology Data Exchange (ETDEWEB)

    Ackerman, E.; Hart, D.; Lethi, M.; Park, W.; Rifkin, S.

    1980-02-01

    The MITRE Corporation conducted a five-month study for the Office of Resource Applications in the Department of Energy on the regulatory requirements of low-Btu coal gasification. During this study, MITRE interviewed representatives of five current low-Btu coal gasification projects and regulatory agencies in five states. From these interviews, MITRE has sought the experience of current low-Btu coal gasification users in order to recommend actions to improve the regulatory process. This report is the third of three volumes. It contains the results of interviews conducted for each of the case studies. Volume 1 of the report contains the analysis of the case studies and recommendations to potential industrial users of low-Btu coal gasification. Volume 2 contains recommendations to regulatory agencies.

  6. Combustion of producer gas from gasification of south Sumatera lignite coal using CFD simulation

    National Research Council Canada - National Science Library

    Fajri Vidian; Novia; Andy Suryatra

    2017-01-01

    .... The process was carried out using producer gas from lignite coal gasification of BA 59 was produced by the updraft gasifier which is located on Energy Conversion Laboratory Mechanical Engineering...

  7. Applied research and evaluation of process concepts for liquefaction and gasification of western coals. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wiser, W. H.

    1980-09-01

    Fourteen sections, including five subsections, of the final report covering work done between June 1, 1975 to July 31, 1980 on research programs in coal gasification and liquefaction have been entered individually into EDB and ERA. (LTN)

  8. Development conditions and limitations of the underground coal gasification in Poland

    Energy Technology Data Exchange (ETDEWEB)

    Kapusta, K.; Stanczyk, K. [Glowny Instytut Gornictwa, Katowice (Poland)

    2009-04-15

    Fundamentals and technologies. for underground coal gasification (UCG) were reviewed. The economic analysis of the UCG process was carried out The applicability of UCG under Polish conditions was discussed.

  9. Synergistic evaluation of the biomass/coal blends for co-gasification purposes

    Directory of Open Access Journals (Sweden)

    S Gaqa, S Mamphweli, D Katwire, E Meyer

    2014-01-01

    Full Text Available Approximately 95% of electricity in South Africa is generated from coal, which is a fossil fuel that has detrimental environmental impacts. Eskom has started investigating the possibility of co-firing coal with biomass to improve their carbon footprint. However, co-firing utilizes approximately 80% of water and results in extensive environmental impacts. This research seeks to investigate the possibility of co-gasification of coal and biomass, which is a thermochemical process that uses about a third of the water required by a coal-fired power station, and results in much lower emissions. Thermogravimetric analysis (TGA was conducted to investigate the existence of a synergy between coal and biomass during gasification. Various coal/biomass blends were investigated using TGA. The synergistic effect between the two feedstock as determined through TGA allowed the prediction of the gasification characteristics of the blends that most likely gave the highest conversion efficiency. Preliminary results suggested the existence of this synergy.

  10. Analysis of coal dust combustion and gasification in the cyclone furnace

    Directory of Open Access Journals (Sweden)

    Zarzycki Robert

    2017-01-01

    Full Text Available This study presents the design and operation of the cyclone furnace fuelled with coal dust. The main function of the furnace is coal dust gasification. The combustible gases that mainly contain CO can be used to feed a pulverized coal-fired boiler. The results of numerical calculations presented in the study demonstrated that cyclone furnace can operate over a wide range of fuel flow rates: from the conditions of coal dust combustion, which ensure maintaining the cyclone furnace in a state of hot reserve to the conditions of coal dust gasification, which allow for production of CO. Gasification process helps control temperature under conditions of elevated oxygen concentration. The results allow for the use of the furnace to improve flexibility and coal dust operation through the reduction in its technological minimum.

  11. Diffusion Coatings for Corrosion Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2005-01-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy may improve its resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this reporting period we focused on getting a bench-scale test system to expose alloy coupons to simulated gasifier environment. The test facility was designed to allow about 20 specimen coupons to be exposed simultaneously for an extend period to a simulated coal gas stream at temperatures up to 1000 C. The simulated gas stream contained about 26%H{sub 2}, 39%CO, 17%CO{sub 2}, 1.4% H{sub 2}S and balance steam. We successfully ran a 100+h test with coated and uncoated stainless steel coupons. The tested alloys include SS304, SS316, SS405, SS409, SS410, and IN800. The main finding is that Ti/Ta coating provides excellent protection to SS405 under conditions where uncoated austenitic and ferritic stainless steel alloy coupons are badly corroded. Cr coatings also appear to afford some protection against corrosion.

  12. Reaction Kinetic Equation for Char Combustion of Underground Coal Gasification

    Institute of Scientific and Technical Information of China (English)

    YU Hong-guan; YANG Lan-he; FENG Wei-min; LIU Shu-qin; SONG Zhen-qi

    2006-01-01

    Based on the quasi-steady-state approximation, the dynamic equation of char combustion in the oxidation zone of underground coal gasification (UCG) was derived. The parameters of the dynamic equation were determined at 900℃ using a thermo-gravimetric (TG) analyzer connected to a flue gas analyzer and this equation. The equation was simplified for specific coals, including high ash content, low ash content, and low ash fusibility ones. The results show that 1) the apparent reaction rate constant increases with an increase in volatile matter value as dry ash-free basis, 2) the effective coefficient of diffusion decreases with an increase in ash as dry basis, and 3) the mass transfer coefficient is independent of coal quality on the whole. The apparent reaction rate constant, mass-transfer coefficient and effective coefficient of diffusion of six char samples range from 7.51×104 m/s to 8.98×104 m/s, 3.05×106 m/s to 3.23×106 m/s and 5.36×106 m2/s to 8.23×106 m2/s at 900℃, respectively.

  13. Corrosion and mechanical behavior of materials for coal gasification applications

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K.

    1980-05-01

    A state-of-the-art review is presented on the corrosion and mechanical behavior of materials at elevated temperatures in coal-gasification environments. The gas atmosphere in coal-conversion processes are, in general, complex mixtures which contain sulfur-bearing components (H/sub 2/S, SO/sub 2/, and COS) as well as oxidants (CO/sub 2//CO and H/sub 2/O/H/sub 2/). The information developed over the last five years clearly shows sulfidation to be the major mode of material degradation in these environments. The corrosion behavior of structural materials in complex gas environments is examined to evaluate the interrelationships between gas chemistry, alloy chemistry, temperature, and pressure. Thermodynamic aspects of high-temperature corrosion processes that pertain to coal conversion are discussed, and kinetic data are used to compare the behavior of different commercial materials of interest. The influence of complex gas environments on the mechanical properties such as tensile, stress-rupture, and impact on selected alloys is presented. The data have been analyzed, wherever possible, to examine the role of environment on the property variation. The results from ongoing programs on char effects on corrosion and on alloy protection via coatings, cladding, and weld overlay are presented. Areas of additional research with particular emphasis on the development of a better understanding of corrosion processes in complex environments and on alloy design for improved corrosion resistance are discussed. 54 references, 65 figures, 24 tables.

  14. Preburn versus postburn mineralogical and geochemical characteristics of overburden and coal at the Hanna, Wyoming underground coal gasification site

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, R.L.; Youngberg, A.D.

    1983-12-01

    Hundreds of mineralogic and geochemical tests were done under US Department of Energy contracts on core samples taken from the Hanna underground coal gasification site. These tests included x-ray diffraction studies of minerals in coal ash, overburden rocks, and heat-altered rocks; x-ray fluorescence analyses of oxides in coal ash and heat-altered rocks; semi-quantitative spectrographic analyses of elements in coal, overburden, and heat-altered rocks; chemical analyses of elements and compounds in coal, overburden, and heat-altered rocks and ASTM proximate and ultimate analyses of coal and heat-altered coal. These data sets were grouped, averaged, and analyzed to provide preburn and postburn mineralogic and geochemical characteristics of rock units at the site. Where possible, the changes in characteristics from the preburn to the postburn state are related to underground coal gasification processes. 11 references, 13 figures, 8 tables.

  15. Technical analysis of advanced wastewater-treatment systems for coal-gasification plants

    Energy Technology Data Exchange (ETDEWEB)

    1981-03-31

    This analysis of advanced wastewater treatment systems for coal gasification plants highlights the three coal gasification demonstration plants proposed by the US Department of Energy: The Memphis Light, Gas and Water Division Industrial Fuel Gas Demonstration Plant, the Illinois Coal Gasification Group Pipeline Gas Demonstration Plant, and the CONOCO Pipeline Gas Demonstration Plant. Technical risks exist for coal gasification wastewater treatment systems, in general, and for the three DOE demonstration plants (as designed), in particular, because of key data gaps. The quantities and compositions of coal gasification wastewaters are not well known; the treatability of coal gasification wastewaters by various technologies has not been adequately studied; the dynamic interactions of sequential wastewater treatment processes and upstream wastewater sources has not been tested at demonstration scale. This report identifies key data gaps and recommends that demonstration-size and commercial-size plants be used for coal gasification wastewater treatment data base development. While certain advanced treatment technologies can benefit from additional bench-scale studies, bench-scale and pilot plant scale operations are not representative of commercial-size facility operation. It is recommended that coal gasification demonstration plants, and other commercial-size facilities that generate similar wastewaters, be used to test advanced wastewater treatment technologies during operation by using sidestreams or collected wastewater samples in addition to the plant's own primary treatment system. Advanced wastewater treatment processes are needed to degrade refractory organics and to concentrate and remove dissolved solids to allow for wastewater reuse. Further study of reverse osmosis, evaporation, electrodialysis, ozonation, activated carbon, and ultrafiltration should take place at bench-scale.

  16. Proceedings of the ninth annual underground coal gasification symposium

    Energy Technology Data Exchange (ETDEWEB)

    Wieber, P.R.; Martin, J.W.; Byrer, C.W. (eds.)

    1983-12-01

    The Ninth Underground Coal Gasification Symposium was held August 7 to 10, 1983 at the Indian Lakes Resort and Conference Center in Bloomingdale, Illinois. Over one-hundred attendees from industry, academia, National Laboratories, State Government, and the US Government participated in the exchange of ideas, results and future research plans. Representatives from six countries including France, Belgium, United Kingdom, The Netherlands, West Germany, and Brazil also participated by presenting papers. Fifty papers were presented and discussed in four formal sessions and two informal poster sessions. The presentations described current and future field testing plans, interpretation of field test data, environmental research, laboratory studies, modeling, and economics. All papers were processed for inclusion in the Energy Data Base.

  17. Policy and Regulatory Issues for Underground Coal Gasification in India

    Science.gov (United States)

    Singh, Sunil K.

    2017-07-01

    Underground coal gasification (UCG) is in its nascent stage of development. Most of the projects are in the nature of pilot projects. UCG technology requires acceptance in general commercial framework as it matures with the progress of time. Policy and regulatory framework, therefore, is considered here only in the expectation that UCG technology may finally be rolled out sooner than later. India is actively pursuing consultations with major countries which have recorded successes in implementing UCG technology in varying measures. In this background, the discussion on policy and regulatory framework is essentially an effort to capture the broad outline of the understanding of the UCG process in a regulatory construct as compared with other regulatory regimes of similar nature.

  18. Anaerobic filters for the treatment of coal gasification wastewater.

    Science.gov (United States)

    Suidan, M T; Siekerka, G L; Kao, S W; Pfeffer, J T

    1983-06-01

    A process train consisting of the following sequence of unit processes, a berl-saddle-packed anaerobic filter, an expanded bed, granular activated carbon anaerobic filter, and an activated sludge nitrification system was evaluated for the treatment of a synthetically prepared coal gasification wastewater. The first-stage anaerobic filter resulted in very little removal of organic matter and no methane production. Excellent reduction in organic matter occurred in the granular activated carbon anaerobic filter. The removal mechanism was initially adsorptive and near the end of the study, removal of organic matter was primarily through conversion to methane gas. It is felt that the success of the activated carbon anaerobic filter was due to the ability of the activated carbon to sequester some components of the wastewater that were toxic to the mixed culture of anaerobic microorganisms. The activated sludge nitrification system resulted in complete ammonia oxidation and was very efficient in final effluent polishing.

  19. Corrosion performance of alumina scales in coal gasification environments

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K. [Argonne National Laboratory, Argonne, IL (United States)

    1997-12-31

    Corrosion of metallic structural materials in complex gas environments of coal gasification is a potential problem. The corrosion process is dictated by concentrations of two key constituents: sulfur as H{sub 2}s and C1 as HCl. This paper examines the corrosion performance of alumina scales that are thermally grown on Fe-base alloys during exposure to O/S mixed-gas environments. The results are compared with the performance of chromia-forming alloys in similar environments. The valuable information on corrosion performance of alloys whose surfaces were enriched with Al by the pack-diffusion process, by the electrospark deposition process, or by weld overlay techniques, is also discussed.

  20. Corrosion performance of alumina scales in coal gasification environments

    Energy Technology Data Exchange (ETDEWEB)

    Natesan, K.

    1997-02-01

    Corrosion of metallic structural materials in complex gas environments of coal gasification is a potential problem. The corrosion process is dictated by concentrations of two key constituents: sulfur as H{sub 2}S and Cl as HCl. This paper examines the corrosion performance of alumina scales that are thermally grown on Fe-base alloys during exposure to O/S mixed-gas environments. The results are compared with the performance of chromia-forming alloys in similar environments. The paper also discusses the available information on corrosion performance of alloys whose surfaces were enriched with Al by the pack-diffusion process, by the electrospark deposition process, or by weld overlay techniques.

  1. Chemical looping coal gasification with calcium ferrite and barium ferrite via solid--solid reactions

    Energy Technology Data Exchange (ETDEWEB)

    Siriwardane, Ranjani [U.S. Department of Energy/NETL; Riley, Jarrett [Oak Ridge Inst. for Science and Education (ORISE), Oak Ridge, TN (United States); Tian, Hanjing [West Virginia Univ., Morgantown, WV (United States); Richards, George [U.S. Department of Energy/NETL

    2016-01-01

    Coal gasification to produce synthesis gas by chemical looping was investigated with two oxygen carriers, barium ferrite (BaFe2O4) and calcium ferrite (CaFe2O4). Thermo-gravimetric analysis (TGA) and fixed-bed flow reactor data indicated that a solid–solid interaction occurred between oxygen carriers and coal to produce synthesis gas. Both thermodynamic analysis and experimental data indicated that BaFe2O4 and CaFe2O4 have high reactivity with coal but have a low reactivity with synthesis gas, which makes them very attractive for the coal gasification process. Adding steam increased the production of hydrogen (H2) and carbon monoxide (CO), but carbon dioxide (CO2) remained low because these oxygen carriers have minimal reactivity with H2 and CO. Therefore, the combined steam–oxygen carrier produced the highest quantity of synthesis gas. It appeared that neither the water–gas shift reaction nor the water splitting reaction promoted additional H2 formation with the oxygen carriers when steam was present. Wyodak coal, which is a sub-bituminous coal, had the best gasification yield with oxygen carrier–steam while Illinois #6 coal had the lowest. The rate of gasification and selectivity for synthesis gas production was significantly higher when these oxygen carriers were present during steam gasification of coal. The rates and synthesis gas yields during the temperature ramps of coal–steam with oxygen carriers were better than with gaseous oxygen.

  2. Chemometric Study of the Ex Situ Underground Coal Gasification Wastewater Experimental Data.

    Science.gov (United States)

    Smoliński, Adam; Stańczyk, Krzysztof; Kapusta, Krzysztof; Howaniec, Natalia

    2012-11-01

    The main goal of the study was the analysis of the parameters of wastewater generated during the ex situ underground coal gasification (UCG) experiments on lignite from Belchatow, and hard coal from Ziemowit and Bobrek coal mines, simulated in the ex situ reactor. The UCG wastewater may pose a potential threat to the groundwater since it contains high concentrations of inorganic (i.e., ammonia nitrogen, nitrites, chlorides, free and bound cyanides, sulfates and trace elements: As, B, Cr, Zn, Al, Cd, Co, Mn, Cu, Mo, Ni, Pb, Hg, Se, Ti, Fe) and organic (i.e., phenolics, benzene and their alkyl derivatives, and polycyclic aromatic hydrocarbons) contaminants. The principal component analysis and hierarchical clustering analysis enabled to effectively explore the similarities and dissimilarities between the samples generated in lignite and hard coal oxygen gasification process in terms of the amounts and concentrations of particular components. The total amount of wastewater produced in lignite gasification process was higher than the amount generated in hard coal gasification experiments. The lignite gasification wastewater was also characterized by the highest contents of acenaphthene, phenanthrene, anthracene, fluoranthene, and pyrene, whereas hard coal gasification wastewater was characterized by relatively higher concentrations of nitrites, As, Cr, Cu, benzene, toluene, xylene, benzo(a)anthracene, chrysene, benzo(b)fluoranthene, benzo(k)fluoranthene, and benzo(a)pyrene.

  3. Online compositional analysis in coal gasification environment using laser-induced plasma technology

    Science.gov (United States)

    Deng, Kung-Li; Wu, Juntao; Wang, Zhe; Lee, Boon; Guida, Renato

    2006-08-01

    Integrated Gasification Combined Cycle (IGCC) power plants have great potential for future clean-coal power generation. Today, the quality of coal is measured by sampling coal using various offline methods, and the syn-gas composition is determined by taking samples downstream of the gasifier and measured by gas chromatograph (GC). Laser induced plasma technology has demonstrated high sensitivity for elementary detection. The capability of free space transmission and focusing of laser beam makes laser induced plasma a unique technology for online compositional analysis in coal gasification environment and optimization control.

  4. Fluidized bed gasification of biomass, waste, and coal, for different applications

    Energy Technology Data Exchange (ETDEWEB)

    Kurkela, E. [VTT Energy, Espoo (Finland). Gasification and Gas Cleaning Group

    1998-12-31

    Various energy production systems based on biomass and waste gasification are being developed in Finland by VTT and its industrial partners. In 1986 - 1995, the Finnish gasification R and D activities were almost fully devoted to the development of simplified IGCC power systems suitable to large-scale power production based on pressurised fluid bed gasification, hot gas cleaning, and a combined-cycle process. Within the LIEKKI 2 programme, VTT continued this R and D by carrying out cogasification tests with coal and biomass fuels and by studying the formation of gas contaminants in fluidized bed gasification. In the mid-1990`s, the atmospheric pressure gasification activities aiming at small- and medium-size power plants based on gas/diesel engines were restarted in Finland. Since 1995, intensive R and D is also focused on atmospheric pressure circulating fluidized bed gasification of biomass residues and wastes. This gasification technology earlier commercialised for lime kiln applications is now aiming to co-utilise locally-available residues and wastes in existing pulverised-coal-fired boilers. The research at VTT in this field is related to the gasification of biofuels with problematic ash behaviour and to gas cleaning from alkali/heavy metals and chlorine. The experimental gasification R and D was complemented by techno-economic and market studies focusing on the potentials of different process alternatives. (orig.) 12 refs.

  5. Great Plains Coal Gasification Project: Quarterly technical progress report, April-June 1988 (Fourth fiscal quarter, 1987-1988)

    Energy Technology Data Exchange (ETDEWEB)

    1988-07-29

    This progress report describes the operation of the Great Plains Gasification Plant, including lignite coal production, SNG production, gas quality, by-products, and certain problems encountered. (LTN)

  6. DIFFUSION COATINGS FOR CORROSION RESISTANT COMPONENTS IN COAL GASIFICATION SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2005-01-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy may improve is resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this reporting period we coated coupons of selected alloy steels with diffusion coatings of Cr and Al, as well as with titanium and tantalum nitrides. The coated samples were analyzed for their surface composition. In several instances, the samples were also cut to determine the depth profile of the coating. Several of the early runs did not yield uniform or deep enough coatings and hence a significant portion of the effort in this period was devoted fixing the problems with our fluidized bed reactor. Before the end of the quarter we had prepared a number of samples, many of them in duplicates, and sent one set to Wabash River Energy Laboratory for them to install in their gasifier. The gasifier was undergoing a scheduled maintenance and thus presented an opportunity to place some of our coupons in the stream of an operating gasifier. The samples submitted included coated and uncoated pairs of different alloys.

  7. Co-Gasification of Coal and Biomass in an IGCC Power Plant: Gasifier Modeling

    Directory of Open Access Journals (Sweden)

    Luis Correas

    2004-12-01

    Full Text Available Co-gasification of coal and biomass in an existing coal-fired IGCC power plant is proposed as an efficient, flexible and environmentally friendly way to increase the biomass contribution to electricity generation. A model of an entrained flow gasifier is described and validated with nearly 3,000 actual steady-state operational data points (4,800 hours. The model is then used to study co-gasification of coal, petroleum coke and up to 10 percent of several types of biomass. As a result, the influence of fuel variations on gasifier performance and modifications in operation that should be made in co-gasification are obtained. A conclusion of our study is that co-gasification is possible provided that operation is properly adapted. A validated model can be very useful for predicting operating points for new fuel mixtures.

  8. Computational Studies for Underground Coal Gasification (UCG) Process

    Science.gov (United States)

    Chatterjee, Dipankar

    2017-07-01

    Underground coal gasification (UCG) is a well proven technology in order to access the coal lying either too deep underground, or is otherwise too costly to be extracted using the conventional mining methods. UCG product gas is commonly used as a chemical feedstock or as fuel for power generation. During the UCG process, a cavity is formed in the coal seam during its conversion to gaseous products. The cavity grows in a three-dimensional fashion as the gasification proceeds. The UCG process is indeed a result of several complex interactions of various geo-thermo-mechanical processes such as the fluid flow, heat and mass transfer, chemical reactions, water influx, thermo-mechanical failure, and other geological aspects. The rate of the growth of this cavity and its shape will have a significant impact on the gas flow patterns, chemical kinetics, temperature distributions, and finally the quality of the product gas. It has been observed that there is insufficient information available in the literature to provide clear insight into these issues. It leaves us with a great opportunity to investigate and explore the UCG process, both from the experimental as well as theoretical perspectives. In the development and exploration of new research, experiment is undoubtedly very important. However, due to the excessive cost involvement with experimentation it is not always recommended for the complicated process like UCG. Recently, with the advent of the high performance computational facilities it is quite possible to make alternative experimentation numerically of many physically involved problems using certain computational tools like CFD (computational fluid dynamics). In order to gain a comprehensive understanding of the underlying physical phenomena, modeling strategies have frequently been utilized for the UCG process. Keeping in view the above, the various modeling strategies commonly deployed for carrying out mathematical modeling of UCG process are described here in

  9. Coal demonstration plants. Quarterly report, July-September 1979

    Energy Technology Data Exchange (ETDEWEB)

    None

    1980-07-01

    The status of two coal liquefaction demonstration plants and of four coal gasification demonstration plants is reviewed under the following headings: company involved, contract number, funding, process name, process description, flowsheet, schedule, history and progress during the July-September quarter, 1979. Supporting projects in coal feeding systems, valves, grinding equipment, instrumentation, process control and water treatment are discussed in a similar way. Conceptual design work on commercial plants for coal to methanol and for a HYGAS high BTU gas plant were continued. (LTN)

  10. DIFFUSION COATINGS FOR CORROSION RESISTANT COMPONENTS IN COAL GASIFICATION SYSTEMS

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2005-03-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy may improve is resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this reporting period we conducted two exposure tests with coated and uncoated coupons. The first one was aborted after a short period, because of a leak in the pressure regulator of a CO/CO{sub 2}/H{sub 2} gas mixture gas cylinder that was used to prepare the simulated coal gas stream. Nevertheless, this run was very instructive as it showed that during the brief exposure when the concentration of H{sub 2}S increased to 8.6%, even specialty alloys such as HR160 and I800 were badly corroded, yet the sample of a SS405-steel that was coated with Ti/Ta showed no signs of corrosion. After replacing the pressure regulator, a second run was conducted with a fresh set of coated and uncoated samples. The Ti/Ta-coated on to SS405 steel from the earlier runs was also exposed in this test. The run proceeded smoothly, and at the end of test the uncoated steels were badly damaged, some evidence of corrosion was found on coupons of HR160 and I800 alloys and the Cr-coated steels, but again, the Ti/Ta-coated sample appeared unaffected.

  11. Fundamental research on novel process alternatives for coal gasification: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Hill, A H; Knight, R A; Anderson, G L; Feldkirchner, H L; Babu, S P

    1986-10-01

    The Institute of Gas Technology has conducted a fundamental research program to determine the technical feasibility of and to prepare preliminary process evaluations for two new approaches to coal gasification. These two concepts were assessed under two major project tasks: Task 1. CO/sub 2/-Coal Gasification Process Concept; Task 2. Internal Recirculation Catalysts Coal Gasification Process Concept. The first process concept involves CO/sub 2/-O/sub 2/ gasification of coal followed by CO/sub 2/ removal from the hot product gas by a solid MgO-containing sorbent. The sorbent is regenerated by either a thermal- or a pressure-swing step and the CO/sub 2/ released is recycled back to the gasifier. The product is a medium-Btu gas. The second process concept involves the use of novel ''semivolatile'' materials as internal recirculating catalysts for coal gasification. These materials remain in the gasifier because their vapor pressure-temperature behavior is such that they will be in the vapor state at the hotter, char exit part of the reactor and will condense in the colder, coal-inlet part of the reactor. 21 refs., 43 figs., 43 tabs.

  12. Model experiment of underground coal gasification (UCG) with blind hole type

    Energy Technology Data Exchange (ETDEWEB)

    Yang, L. [China University of Mining and Technology, Xuzhou (China). College of Mineral Resource and Earth Science

    2001-06-01

    The technology of underground coal gasification of the blind-hole type is put forward in order to meet the demands of recovering coal resources under buildings, railways and water bodies. The method of blind-hole type underground gasification is explained briefly. The model test platform, test system and test process are introduced and the test results are analysed. Measurement results indicate that the nature of the gasification agent not only affects the stove body temperature distribution, but determines the coal gas compositions and heat value. Under the action of high temperature, the structure and surface appearance of the coal bodies around the blind-hole gasifier are changed, forming a distillation combine zone, thus improves the load-carrying ability and integral stability of the coal bodies around the gasification stove. Hence the method of blind-hole underground gasification makes possible the recovery for coal resources lying under buildings, railways and water bodies. It will undoubtedly lay an important theoretical foundation for the technique of UCG to move a step further in the direction of commercialised production. 3 refs., 4 figs., 2 tabs.

  13. Coal gasification systems engineering and analysis. Appendix G: Commercial design and technology evaluation

    Science.gov (United States)

    1980-01-01

    A technology evaluation of five coal gasifier systems (Koppers-Totzek, Texaco, Babcock and Wilcox, Lurgi and BGC/Lurgi) and procedures and criteria for evaluating competitive commercial coal gasification designs is presented. The technology evaluation is based upon the plant designs and cost estimates developed by the BDM-Mittelhauser team.

  14. Efficient volatile metal removal from low rank coal in gasification, combustion, and processing systems and methods

    Energy Technology Data Exchange (ETDEWEB)

    Bland, Alan E.; Sellakumar, Kumar Muthusami; Newcomer, Jesse D.

    2017-03-21

    Efficient coal pre-processing systems (69) integrated with gasification, oxy-combustion, and power plant systems include a drying chamber (28), a volatile metal removal chamber (30), recirculated gases, including recycled carbon dioxide (21), nitrogen (6), and gaseous exhaust (60) for increasing the efficiencies and lowering emissions in various coal processing systems.

  15. Efficient volatile metal removal from low rank coal in gasification, combustion, and processing systems and methods

    Science.gov (United States)

    Bland, Alan E.; Sellakumar, Kumar Muthusami; Newcomer, Jesse D.

    2017-03-21

    Efficient coal pre-processing systems (69) integrated with gasification, oxy-combustion, and power plant systems include a drying chamber (28), a volatile metal removal chamber (30), recirculated gases, including recycled carbon dioxide (21), nitrogen (6), and gaseous exhaust (60) for increasing the efficiencies and lowering emissions in various coal processing systems.

  16. 3rd international conference on coal gasification and liquefaction, University of Pittsburgh

    Energy Technology Data Exchange (ETDEWEB)

    None

    1976-01-01

    The third annual international conference on ''Coal Gasification and Liquefaction: What Needs to be Done Now'' was held at the University of Pittsburgh, Pittsburgh, PA on August 3-5, 1976. The majority of the papers dealt with coal gasification and liquefaction (often on the basis of process pilot plant experience) and on flue gas desulfurization by a variety of processes; fewer papers involved fluidized bed combustion, combined cycle power plants, coal desulfurization, government policy on environmental effects and on synthetic fuels, etc. Twenty-eight papers have been entered individually into EDB and ERA. (LTN)

  17. Investigation of Coal-biomass Catalytic Gasification using Experiments, Reaction Kinetics and Computational Fluid Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Battaglia, Francine [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Agblevor, Foster [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Klein, Michael [Univ. of Delaware, Newark, DE (United States); Sheikhi, Reza [Northeastern Univ., Boston, MA (United States)

    2015-12-31

    A collaborative effort involving experiments, kinetic modeling, and computational fluid dynamics (CFD) was used to understand co-gasification of coal-biomass mixtures. The overall goal of the work was to determine the key reactive properties for coal-biomass mixed fuels. Sub-bituminous coal was mixed with biomass feedstocks to determine the fluidization and gasification characteristics of hybrid poplar wood, switchgrass and corn stover. It was found that corn stover and poplar wood were the best feedstocks to use with coal. The novel approach of this project was the use of a red mud catalyst to improve gasification and lower gasification temperatures. An important results was the reduction of agglomeration of the biomass using the catalyst. An outcome of this work was the characterization of the chemical kinetics and reaction mechanisms of the co-gasification fuels, and the development of a set of models that can be integrated into other modeling environments. The multiphase flow code, MFIX, was used to simulate and predict the hydrodynamics and co-gasification, and results were validated with the experiments. The reaction kinetics modeling was used to develop a smaller set of reactions for tractable CFD calculations that represented the experiments. Finally, an efficient tool was developed, MCHARS, and coupled with MFIX to efficiently simulate the complex reaction kinetics.

  18. Investigation of Coal-biomass Catalytic Gasification using Experiments, Reaction Kinetics and Computational Fluid Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Battaglia, Francine [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Agblevor, Foster [Virginia Polytechnic Inst. and State Univ. (Virginia Tech), Blacksburg, VA (United States); Klein, Michael [Univ. of Delaware, Newark, DE (United States); Sheikhi, Reza [Northeastern Univ., Boston, MA (United States)

    2015-09-30

    A collaborative effort involving experiments, kinetic modeling, and computational fluid dynamics (CFD) was used to understand co-gasification of coal-biomass mixtures. The overall goal of the work was to determine the key reactive properties for coal-biomass mixed fuels. Sub-bituminous coal was mixed with biomass feedstocks to determine the fluidization and gasification characteristics of hybrid poplar wood, switchgrass and corn stover. It was found that corn stover and poplar wood were the best feedstocks to use with coal. The novel approach of this project was the use of a red mud catalyst to improve gasification and lower gasification temperatures. An important results was the reduction of agglomeration of the biomass using the catalyst. An outcome of this work was the characterization of the chemical kinetics and reaction mechanisms of the co-gasification fuels, and the development of a set of models that can be integrated into other modeling environments. The multiphase flow code, MFIX, was used to simulate and predict the hydrodynamics and co-gasification, and results were validated with the experiments. The reaction kinetics modeling was used to develop a smaller set of reactions for tractable CFD calculations that represented the experiments. Finally, an efficient tool was developed, MCHARS, and coupled with MFIX to efficiently simulate the complex reaction kinetics.

  19. Geochemistry of ultra-fine and nano-compounds in coal gasification ashes: a synoptic view.

    Science.gov (United States)

    Kronbauer, Marcio A; Izquierdo, Maria; Dai, Shifeng; Waanders, Frans B; Wagner, Nicola J; Mastalerz, Maria; Hower, James C; Oliveira, Marcos L S; Taffarel, Silvio R; Bizani, Delmar; Silva, Luis F O

    2013-07-01

    The nano-mineralogy, petrology, and chemistry of coal gasification products have not been studied as extensively as the products of the more widely used pulverized-coal combustion. The solid residues from the gasification of a low- to medium-sulfur, inertinite-rich, volatile A bituminous coal, and a high sulfur, vitrinite-rich, volatile C bituminous coal were investigated. Multifaceted chemical characterization by XRD, Raman spectroscopy, petrology, FE-SEM/EDS, and HR-TEM/SEAD/FFT/EDS provided an in-depth understanding of coal gasification ash-forming processes. The petrology of the residues generally reflected the rank and maceral composition of the feed coals, with the higher rank, high-inertinite coal having anisotropic carbons and inertinite in the residue, and the lower rank coal-derived residue containing isotropic carbons. The feed coal chemistry determines the mineralogy of the non-glass, non-carbon portions of the residues, with the proportions of CaCO₃ versus Al₂O₃ determining the tendency towards the neoformation of anorthite versus mullite, respectively. Electron beam studies showed the presence of a number of potentially hazardous elements in nanoparticles. Some of the neoformed ultra-fine/nano-minerals found in the coal ashes are the same as those commonly associated with oxidation/transformation of sulfides and sulfates.

  20. The potential for adding plastic waste fuel at a coal gasification power plant.

    Science.gov (United States)

    Campbell, P E; Evans, R H; McMullan, J T; Williams, B C

    2001-12-01

    Plastics wastes from a municipal solid waste plant have a high energy content which make it an interesting option for co-processing with coal. The potential for adding plastic waste to a coal fired Texaco IGCC (Integrated Gasification Combined Cycle) power station is examined. The resulting efficiency increases due to the improved gasification qualities of plastic over coal. For the overall economics to be the same as the coal only case, the maximum amount that the power station can afford to spend on preparing the plastic waste for use is similar to the assumed coal cost, plus the avoided landfill cost, minus the transport cost. The location of the power station plays a key role, since this has an effect on the transport costs as well as on the landfill charges. The sensitivity of the economics of co-processing plastic waste with coal for a variety of power station operational parameters is presented.

  1. Chemical and toxicological evaluation of underground coal gasification (UCG) effluents. The coal rank effect.

    Science.gov (United States)

    Kapusta, Krzysztof; Stańczyk, Krzysztof

    2015-02-01

    The effect of coal rank on the composition and toxicity of water effluents resulting from two underground coal gasification experiments with distinct coal samples (lignite and hard coal) was investigated. A broad range of organic and inorganic parameters was determined in the sampled condensates. The physicochemical tests were supplemented by toxicity bioassays based on the luminescent bacteria Vibrio fischeri as the test organism. The principal component analysis and Pearson correlation analysis were adopted to assist in the interpretation of the raw experimental data, and the multiple regression statistical method was subsequently employed to enable predictions of the toxicity based on the values of the selected parameters. Significant differences in the qualitative and quantitative description of the contamination profiles were identified for both types of coal under study. Independent of the coal rank, the most characteristic organic components of the studied condensates were phenols, naphthalene and benzene. In the inorganic array, ammonia, sulphates and selected heavy metals and metalloids were identified as the dominant constituents. Except for benzene with its alkyl homologues (BTEX), selected polycyclic aromatic hydrocarbons (PAHs), zinc and selenium, the values of the remaining parameters were considerably greater for the hard coal condensates. The studies revealed that all of the tested UCG condensates were extremely toxic to V. fischeri; however, the average toxicity level for the hard coal condensates was approximately 56% higher than that obtained for the lignite. The statistical analysis provided results supporting that the toxicity of the condensates was most positively correlated with the concentrations of free ammonia, phenols and certain heavy metals.

  2. Potassium dichromate method of coal gasification the study of the typical organic compounds in water

    Science.gov (United States)

    Quan, Jiankang; Qu, Guangfei; Dong, Zhanneng; Lu, Pei; Cai, Yingying; Wang, Shibo

    2017-05-01

    The national standard method is adopted in this paper the water - digestion spectrophotometry for determination of the chemical oxygen demand (COD), after ultrasonic processing of coal gasification water for CODCr measurement. Using the control variable method, measured in different solution pH, ultrasonic frequency, ultrasonic power, reaction conditions of different initial solution concentration, the change of coal gasification water CODCr value under the action of ultrasonic, the experimental results shows that appear when measurement is allowed to fluctuate, data, in order to explain the phenomenon we adopt the combination of the high performance liquid chromatography and mass spectrometry before and after ultrasonic coal gasification qualitative analysis on composition of organic matter in water. To raw water sample chromatography - mass spectrometry (GC/MS) analysis, combined with the spectra analysis of each peak stands for material, select coal gasification typical organic substances in water, with the method of single digestion, the equivalent CODCr values measured after digestion. Order to produce, coal gasification water contained high concentration organic wastewater, such as the national standard method is adopted to eliminate the organic material, therefore to measure the CODCr value is lower than actual CODCr value of the emergence of the phenomenon, the experiment of the effect of ultrasound [9-13] is promote the complex organic chain rupture, also explains the actual measurement data fluctuation phenomenon in the experiment.

  3. Co-gasification of coal and biomass: Synergy, characterization and reactivity of the residual char.

    Science.gov (United States)

    Hu, Junhao; Shao, Jingai; Yang, Haiping; Lin, Guiying; Chen, Yingquan; Wang, Xianhua; Zhang, Wennan; Chen, Hanping

    2017-11-01

    The synergy effect between coal and biomass in their co-gasification was studied in a vertical fixed bed reactor, and the physic-chemical structural characteristics and gasification reactivity of the residual char obtained from co-gasification were also investigated. The results shows that, conversion of the residual char and tar into gas is enhanced due to the synergy effect between coal and biomass. The physical structure of residual char shows more pore on coal char when more biomass is added in the co-gasification. The migration of inorganic elements between coal and biomass was found, the formation and competitive role of K2SiO3, KAlSiO4, and Ca3Al2(SiO4)3 is a mechanism behind the synergy. The graphization degree is enhanced but size of graphite crystallite in the residual char decreases with biomass blending ratio increasing. TGA results strongly suggest the big difference in the reactivity of chars derived from coal and biomass in spite of influence from co-gasification. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Novel fragmentation model for pulverized coal particles gasification in low temperature air thermal plasma

    OpenAIRE

    Jovanović Rastko D.; Cvetinović Dejan B.; Stefanović Predrag Lj.; Škobalj Predrag D.; Marković Zoran J.

    2016-01-01

    New system for start-up and flame support based on coal gasification by low temperature air thermal plasma is planned to supplement current heavy oil system in Serbian thermal power plants in order to decrease air pollutions emission and operational costs. Locally introduced plasma thermal energy heats up and ignites entrained coal particles, thus starting chain process which releases heat energy from gasified coal particles inside burner channel. Important...

  5. Presence of an unusual methanogenic bacterium in coal gasification waste.

    Science.gov (United States)

    Tomei, F A; Rouse, D; Maki, J S; Mitchell, R

    1988-12-01

    Methanogenic bacteria growing on a pilot-scale, anaerobic filter processing coal gasification waste were enriched in a mineral salts medium containing hydrogen and acetate as potential energy sources. Transfer of the enrichments to methanol medium resulted in the initial growth of a strain of Methanosarcina barkeri, but eventually small cocci became dominant. The cocci growing on methanol produced methane and exhibited the typical fluorescence of methanogenic bacteria. They grew in the presence of the cell wall synthesis-inhibiting antibiotics d-cycloserine, fosfomycin, penicillin G, and vancomycin as well as in the presence of kanamycin, an inhibitor of protein synthesis in eubacteria. The optimal growth temperature was 37 degrees C, and the doubling time was 7.5 h. The strain lysed after reaching stationary phase. The bacterium grew poorly with hydrogen as the energy source and failed to grow on acetate. Morphologically, the coccus shared similarities with Methanosarcina sp. Cells were 1 mum wide, exhibited the typical thick cell wall and cross-wall formation, and formed tetrads. Packets and cysts were not formed.

  6. Ash microstructure and formation mechanisms during entrained coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Kauppinen, E.I.; Topper, U.; Kurkela, J.; Jokiniemi, J.K. [VTT Aerosol Technology Group (Finland). VTT Chemical Technology

    1998-12-01

    We have studied the structure and composition of ash particles formed during the entrained gasification of Taiheiyo coal at Nakoso IGCC pilot plant in Japan with field emission scanning and transmission electron microscopes. Ash particles can be classified into three groups based on their morphology. Particles larger than one micron are either spherical ash particles composed mainly of Al, Si Ca and O or flake-like unreacted char particles. The overall fly ash structure is dominated by agglomerates of partially sintered, 10-200 nm diameter primary particles. Primary particles are composed mainly of carbon with trace amounts of oxygen, sodium, silicon, sulphur and calcium. EDX analyses with FE-TEM show that the composition of individual primary particles varies strongly from almost pure carbon to O, Al, Si and Ca. High resolution TEM shows that carbon-rich primary particles have onion-type structure, similar to the soot structure. In addition, HR-TEM shows that the structure of primary particles varies from one to another, with some agglomerates being formed from cluster smaller than 10 nanometres in diameter. We propose ash particle formation mechanisms based on their structural and composition characterization. 5 figs.

  7. Summary report: Trace substance emissions from a coal-fired gasification plant

    Energy Technology Data Exchange (ETDEWEB)

    Williams, A.; Wetherold, B.; Maxwell, D.

    1996-10-16

    The U.S. Department of Energy (DOE), the Electric Power Research Institute (EPRI), and Louisiana Gasification Technology Inc. (LGTI) sponsored field sampling and analyses to characterize emissions of trace substances from LGTI`s integrated gasification combined cycle (IGCC) power plant at Plaquemine, Louisiana. The results indicate that emissions from the LGTI facility were quite low, often in the ppb levels, and comparable to a well-controlled pulverized coal-fired power plant.

  8. Japan`s New Sunshine Project. 20. 1995 annual summary of coal liquefaction and gasification

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-10-01

    The paper described a summary of the 1995 study on coal liquefaction and gasification under the New Sunshine Project. As for coal liquefaction, a study was made of liquefaction characteristics and catalysts of various coals. Also studied were liquefaction conditions for quality improvement of liquefaction products, an evaluation method of quality of coal liquid, and a utilization method of coal liquid. In order to prevent carbonization and realize effective liquefaction, a study was conducted for elucidation of the reaction mechanism of high pressure hydrogenation. In a 150t/d pilot plant using hydrogen transfer hydrogenation solvents, the NEDOL method was studied using various catalysts and kinds of coals. This is a step prior to data acquisition for engineering, actual construction of equipment and operation. A 1t/d process supporting unit is a unit to support it. The unit conducts studies on slurry letdown valves and synthetic iron sulfide catalysts, screening of Chinese coals, etc. As to coal gasification, the paper added to the basic research the combined cycle power generation using entrained flow coal gasification for improvement of thermal efficiency and environmental acceptability and the HYCOL method for hydrogen production. 68 refs., 40 figs.

  9. The Texaco coal gasification process for manufacture of medium BTU gas

    Science.gov (United States)

    Schlinger, W. G.

    1978-01-01

    The development of the Texaco coal gasification process is discussed with particular emphasis on its close relationship to the fully commercialized Texaco synthesis gas generation process for residual oil gasification. The end uses of the product gas are covered, with special attention to electric power generation via combined cycle technology. Control of SO2, NOx, and particulate emissions in the power generating mode is also covered. The application of this technology in a proposed Texaco-Southern California Edison demonstration project is mentioned. Investment information released for a 1000-megawatt advanced combined cycle gasification facility, is also reviewed.

  10. Fluidized-Bed Gasification of Plastic Waste, Wood, and Their Blends with Coal

    Directory of Open Access Journals (Sweden)

    Lucio Zaccariello

    2015-08-01

    Full Text Available The effect of fuel composition on gasification process performance was investigated by performing mass and energy balances on a pre-pilot scale bubbling fluidized bed reactor fed with mixtures of plastic waste, wood, and coal. The fuels containing plastic waste produced less H2, CO, and CO2 and more light hydrocarbons than the fuels including biomass. The lower heating value (LHV progressively increased from 5.1 to 7.9 MJ/Nm3 when the plastic waste fraction was moved from 0% to 100%. Higher carbonaceous fines production was associated with the fuel containing a large fraction of coal (60%, producing 87.5 g/kgFuel compared to only 1.0 g/kgFuel obtained during the gasification test with just plastic waste. Conversely, plastic waste gasification produced the highest tar yield, 161.9 g/kgFuel, while woody biomass generated only 13.4 g/kgFuel. Wood gasification showed a carbon conversion efficiency (CCE of 0.93, while the tests with two fuels containing coal showed lowest CCE values (0.78 and 0.70, respectively. Plastic waste and wood gasification presented similar cold gas efficiency (CGE values (0.75 and 0.76, respectively, while that obtained during the co-gasification tests varied from 0.53 to 0.73.

  11. Developmental research study of coal-fines agglomeration for fixed-bed gasification. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Elmquist, S.A.; Girimont, J.A.; Korosi, F.A.; Kuby, O.A.; Nelson, S.G.; Paulin, M.O.; Peterson, C.A.; Baker, R.L.; Saller, E.

    1983-05-31

    This report presents the results of an intensive program to develop and evaluate agglomerates made from coal fines for use in a fixed-bed gasifier. There were several tasks completed earlier and their results published prior to this final report. These included: Task 1-A, a literature survey of coal agglomeration, binders and techniques used in coal agglomeration, coal and binder treatments and the results of work done by others; Task 1-B, an examination of performance of lump coals in coal gasification, testing and evaluation of the properties of these coals, and evaluation of mine site coal upgrading methods; and Task 1-C/D, a laboratory investigation of coal agglomerates, including wafers, briquettes and pellets, in which the agglomerated coal fines were formed and tested, and the performance of various coal/binder combinations was recorded and evaluated, and factors affecting commercial scale coal agglomeration and gasification were evaluated. These three prior tasks are presented in this report in condensed form.

  12. The role of catalyst precursor anions in coal gasification. Final technical report, September 1991--June 1994

    Energy Technology Data Exchange (ETDEWEB)

    Abotsi, G.M.K.

    1995-01-01

    The utilization of coal is currently limited by several factors, including the environmental impacts of coal use and the lack of cost-effective technologies to convert coal into useful gaseous and liquid products. Several catalysts have been evaluated for coal gasification and liquefaction. The activities of the catalysts are dependent on many factors such as the method of catalyst addition to the coal and the catalyst precursor type. Since catalyst addition to coal is frequently conducted in aqueous solution, the surface chemistry of colloidal coal particles will be expected to exert an influence on catalyst uptake. However, the effects of the various coal gasification catalyst precursors on the interfacial properties of coal during catalyst loading from solution has received little attention. The aim of this study is to ascertain the influence of the metal salts (i): calcium acetate (Ca(OOCCH{sub 3}){sub 2}), calcium chloride (CaCl{sub 2}) or calcium nitrate (Ca(NO{sub 3}){sub 2}) and (ii): potassium acetate (KOOCCH{sub 3}), potassium chloride (KCl), potassium nitrate (KNO{sub 3}), potassium carbonate (K{sub 2}CO{sub 3}) and potassium sulfate (K{sub 2}SO{sub 4}) on the electrokinetic and adsorptive properties of coal and determine the relationship, if any, between coal surface electrokinetic properties, and catalyst loading and eventually its effects on the reactivities of coal chars.

  13. Hydrogen production from coal gasification in supercritical water with a continuous flowing system

    Energy Technology Data Exchange (ETDEWEB)

    Li, Yongliang; Guo, Liejin; Zhang, Ximin; Jin, Hui; Lu, Youjun [State Key Laboratory of Multiphase Flow in Power Engineering, Xi' an Jiaotong University, Xi' an 710049 (China)

    2010-04-15

    The technology of supercritical water gasification can convert coal to hydrogen-rich gaseous product efficiently and cleanly. A novel continuous-flow system for coal gasification in supercritical water was developed successfully in State Key Laboratory of Multiphase Flow in Power Engineering (SKLMF). The experimental device was designed for the temperature up to 800 C and the pressure up to 30 MPa. The gasification characteristics of coal were investigated within the experimental condition range of temperature at 650-800 C, pressure at 23-27 MPa and flow rate from 3 kg h{sup -1} to 7 kg h{sup -1}. K{sub 2}CO{sub 3} and Raney-Ni were used as catalyst and H{sub 2}O{sub 2} as oxidant. The effects of main operation parameters (temperature, pressure, flow rate, catalyst, oxidant, concentration of coal slurry) upon gasification were carried out. The slurry of 16 wt% coal + 1.5 wt% CMC was successfully transported into the reactor and continuously gasified in supercritical water in the system. The hydrogen fraction reached up to 72.85%. The experimental results demonstrate the bright future of efficient and clean conversion of coal. (author)

  14. High-pressure co-gasification of coal with biomass and petroleum coke

    Energy Technology Data Exchange (ETDEWEB)

    Fermoso, J.; Arias, B.; Plaza, M.G.; Pevida, C.; Rubiera, F.; Pis, J.J. [Instituto Nacional del Carbon, CSIC, Apartado 73, 33080 Oviedo (Spain); Garcia-Pena, F.; Casero, P. [Elcogas S.A. C.T. GICC Puertollano, Carretera Calzada de Calatrava, km 27, 13500 Puertollano, Ciudad Real (Spain)

    2009-07-15

    The effects of the main operation variables (temperature, pressure and gasifying agent composition) on gas production and other process parameters, such as carbon conversion, cold gas efficiency and high heating value, during the steam-oxygen gasification of a bituminous coal were studied. It was observed that temperature and oxygen concentration were the most influential variables during the gasification process. In addition, co-gasification tests of binary blends of a bituminous coal with different types of biomass (up to 10%) and petroleum coke (up to 60%), as well as ternary blends of coal-petcoke-biomass (45-45-10%) were conducted in order to study the effect of blending on gas production and carbon conversion. (author)

  15. Study of early appearance of skin lesions in coal gasification workers.

    Science.gov (United States)

    Begraca, M; Ukmata, H; Morris, S C; Canhasi, B; Haxhiu, M A

    1991-09-01

    A retrospective cohort morbidity study was conducted among workers employed at the Kosovo coal gasification plant and a reference population of open-pit lignite miners. The aim was to determine the rate of early skin cancer and pre-cancerous skin lesions. In 15 years of commercial operation of the coal gasification plant, seven workers were diagnosed with benign skin tumors, six with pre-cancerous skin diseases, but none with skin cancer. The lesions were significantly fewer than were reported earlier over a shorter time period and in a smaller population at a coal hydrogenation plant. Compared to the reference population who received medical care in the same clinic, gasification workers had a lower skin cancer rate, but a higher rate of benign skin tumors and potentially pre-cancerous skin diseases.

  16. Co-gasification of bituminous coal and hydrochar derived from municipal solid waste: Reactivity and synergy.

    Science.gov (United States)

    Wei, Juntao; Guo, Qinghua; He, Qing; Ding, Lu; Yoshikawa, Kunio; Yu, Guangsuo

    2017-09-01

    In this work, the influences of gasification temperature and blended ratio on co-gasification reactivity and synergy of Shenfu bituminous coal (SF) and municipal solid waste-derived hydrochar (HTC) were investigated using TGA. Additionally, active alkaline and alkaline earth metal (AAEM) transformation during co-gasification was quantitatively analyzed by inductively coupled plasma optical emission spectrometer for correlating synergy on co-gasification reactivity. The results showed that higher char gasification reactivity existed at higher HTC char proportion and gasification temperature, and the main synergy behaviour on co-gasification reactivity was performed as synergistic effect. Enhanced synergistic effect at lower temperature was mainly resulted from more obviously inhibiting the primary AAEM (i.e. active Ca) transformation, and weak synergistic effect still existed at higher temperature since more active K with prominent catalysis was retained. Furthermore, more active HTC-derived AAEM remaining in SF sample during co-gasification would lead to enhanced synergistic effect as HTC char proportion increased. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. Study on reactivity characteristics and synergy behaviours of rice straw and bituminous coal co-gasification.

    Science.gov (United States)

    Wei, Juntao; Guo, Qinghua; Chen, Handing; Chen, Xueli; Yu, Guangsuo

    2016-11-01

    Co-gasification of rice straw (RS) and Shenfu bituminous coal (SF) was conducted in a thermogravimetric analyzer (TGA) to explore the effects of gasification temperature and blend ratio on reactivity characteristics and synergy behaviours of co-gasification. Moreover, the relationship between the synergy and the K/Ca transformation in co-gasification was studied using flame atomic absorption spectrum (FAAS) and in-situ heating stage microscope. The results showed that the whole reactivities increased with increasing RS proportion and gasification temperature. The transformation of water-soluble and ion-exchanged (ws-ie) calcium was enhanced in whole co-gasification and the ws-ie potassium transformation was obviously inhibited in mid-late reaction. Hence, synergy behaviours were synthetically determined by the enhancement of Ca deactivation and the strengthening of K catalysis. The inhibiting effect was occurred in initial co-gasification and was converted to the synergistic effect at a characteristic conversion, which decreased with increasing RS proportion and decreasing gasification temperature. Copyright © 2016 Elsevier Ltd. All rights reserved.

  18. Novel fragmentation model for pulverized coal particles gasification in low temperature air thermal plasma

    Directory of Open Access Journals (Sweden)

    Jovanović Rastko D.

    2016-01-01

    Full Text Available New system for start-up and flame support based on coal gasification by low temperature air thermal plasma is planned to supplement current heavy oil system in Serbian thermal power plants in order to decrease air pollutions emission and operational costs. Locally introduced plasma thermal energy heats up and ignites entrained coal particles, thus starting chain process which releases heat energy from gasified coal particles inside burner channel. Important stages during particle combustion, such as particle devolatilisation and char combustion, are described with satisfying accuracy in existing commercial CFD codes that are extensively used as powerful tool for pulverized coal combustion and gasification modeling. However, during plasma coal gasification, high plasma temperature induces strong thermal stresses inside interacting coal particles. These stresses lead to “thermal shock” and extensive particle fragmentation during which coal particles with initial size of 50-100 m disintegrate into fragments of at most 5-10 m. This intensifies volatile release by a factor 3-4 and substantially accelerates the oxidation of combustible matter. Particle fragmentation, due to its small size and thus limited influence on combustion process is commonly neglected in modelling. The main focus of this work is to suggest novel approach to pulverized coal gasification under high temperature conditions and to implement it into commercial comprehensive code ANSYS FLUENT 14.0. Proposed model was validated against experimental data obtained in newly built pilot scale D.C plasma burner test facility. Newly developed model showed very good agreement with experimental results with relative error less than 10%, while the standard built-in gasification model had error up to 25%.

  19. Hoe Creek II field experiment on underground coal gasification, preliminary results

    Energy Technology Data Exchange (ETDEWEB)

    Aiman, W.R.; Thorsness, C.B.; Hill, R.W.; Rozsa, R.B.; Cena, R.; Gregg, D.W.; Stephens, D.R.

    1978-02-27

    A second in-situ coal gasification experiment was performed by Lawrence Livermore Laboratory at Hoe Creek in Wyoming. The Linked Vertical Wells scheme for in-situ coal gasification was used. The experiment took 100 days for air flow testing, reverse combustion linking, forward combustion gasification, and post-burn steam flow. Air was used for gasification except for a 2-day test with oxygen and steam. Reverse combustion linking took 14 days at 1.6 m/day. Air requirements for linking were 0.398 Mgmol per meter of link assuming a single direct link. The coal pyrolysed during linking was 17 m/sup 3/, which corresponds to a single link 1.0 m in diameter. There was, however, strong evidence of at least two linkage paths. The detected links stayed below the 3 m level in the 7.6 coal seam; however, the product flow from the forward-burn gasification probably followed the coal-overburden interface not the reverse burn channels at the 3 m level. A total of 232 Mgmols (194 Mscf) of gas was produced with heating value above 125 kJ/mol (140 Btu/scf) for significant time periods and an average of 96 kJ/mol (108 Btu/scf). During the oxygen-steam test the heating value was above 270 kJ/gmol (300 Btu/scf) twice and averaged 235 kJ/gmol (265 Btu/scf). The coal recovery was 1310 m/sup 3/ (1950 ton). Gasification was terminated because of decreasing product quality not because of burn through. The product quality decreased because of increasing underground heat loss.

  20. Geochemistry of ultra-fine and nano-compounds in coal gasification ashes: A synoptic view

    Energy Technology Data Exchange (ETDEWEB)

    Kronbauer, Marcio A. [Centro Universitário La Salle, Mestrado em Avaliação de Impactos Ambientais em Mineração, Victor Barreto, 2288 Centro, 92010-000 Canoas, RS (Brazil); Universidade Federal do Rio Grande do Sul, Escola de Engenharia, Departamento de Metalurgia, Centro de Tecnologia, Av. Bento Gonçalves, 9500, Bairro Agronomia, CEP: 91501-970, Porto Alegre, RS (Brazil); Izquierdo, Maria [School of Applied Sciences, Cranfield University, Bedfordshire MK43 0AL (United Kingdom); Dai, Shifeng [State Key Laboratory of Coal Resources and Safe Mining, China University of Mining and Technology, Beijing 100083 (China); Waanders, Frans B. [School of Chemical and Minerals Engineering, North West University (Potchefstroom campus), Potchefstroom 2531 (South Africa); Wagner, Nicola J. [School of Chemical and Metallurgical Engineering, University of the Witwatersrand, Johannesburg (South Africa); Mastalerz, Maria [Indiana Geological Survey, Indiana University, Bloomington, IN 47405-2208 (United States); Hower, James C. [University of Kentucky Center for Applied Energy Research, 2540 Research Park Drive, Lexington, KY 40511 (United States); Oliveira, Marcos L.S. [Environmental Science and Nanotechnology Department, Catarinense Institute of Environmental Research and Human Development, IPADHC, Capivari de Baixo, Santa Catarina (Brazil); Taffarel, Silvio R.; Bizani, Delmar [Centro Universitário La Salle, Mestrado em Avaliação de Impactos Ambientais em Mineração, Victor Barreto, 2288 Centro, 92010-000 Canoas, RS (Brazil); and others

    2013-07-01

    The nano-mineralogy, petrology, and chemistry of coal gasification products have not been studied as extensively as the products of the more widely used pulverized-coal combustion. The solid residues from the gasification of a low- to medium-sulfur, inertinite-rich, volatile A bituminous coal, and a high sulfur, vitrinite-rich, volatile C bituminous coal were investigated. Multifaceted chemical characterization by XRD, Raman spectroscopy, petrology, FE-SEM/EDS, and HR-TEM/SEAD/FFT/EDS provided an in-depth understanding of coal gasification ash-forming processes. The petrology of the residues generally reflected the rank and maceral composition of the feed coals, with the higher rank, high-inertinite coal having anisotropic carbons and inertinite in the residue, and the lower rank coal-derived residue containing isotropic carbons. The feed coal chemistry determines the mineralogy of the non-glass, non-carbon portions of the residues, with the proportions of CaCO{sub 3} versus Al{sub 2}O{sub 3} determining the tendency towards the neoformation of anorthite versus mullite, respectively. Electron beam studies showed the presence of a number of potentially hazardous elements in nanoparticles. Some of the neoformed ultra-fine/nano-minerals found in the coal ashes are the same as those commonly associated with oxidation/transformation of sulfides and sulfates. - Highlights: • Coal waste geochemisty can provide increased environmental information in coal-mining areas. • Oxidation is the major process for mineral transformation in coal ashes. • The electron bean methodology has been applied to investigate neoformed minerals.

  1. Air-based coal gasification in a two-chamber gas reactor with circulating fluidized bed

    Science.gov (United States)

    Dubinin, A. M.; Tuponogov, V. G.; Kagramanov, Y. A.

    2017-01-01

    During the bed gasification of solid fuels, the process temperature in the reaction zone is not high enough for reaching the maximum rate of the chemical efficiency factor of the gasification process. In order to increase the chemical efficiency factor, it is necessary to supply extra heat to the reaction zone to increase the reaction temperature. In this article, coal gasification in a chamber with forced fluidized bed is considered and it is proposed to supply extra heat with a circulating flow of an inert particulate heat transfer agent. Circulating inert particulate material is successively heated by coal combustion in a cone chamber with bubbling fluidized bed and in a combustion chamber with a spherical nozzle that inhibits the forced fluidized bed. After that, the heat transfer agent heated to 930-950°C enters first in a gasification chamber with bubbling bed and then in a chamber with forced fluidized bed, where it transfers the physical heat to the air fuel mixture. The experiments conducted with crushed Borodinsky coal and inert particulate heat transfer agent (electrocorundum) showed the temperature rise in a gasification chamber with from 760 to 870°C and the increase in the combustible component (CO) concentration in the gasification products by 5.5%. Based on the kinetic equations of the fuel combustion reactions and the CO2 reduction to CO and on the thermal balance equations of combustion and gasification chambers, the simulation model for the gas composition and the temperature rate calculated by the height of reaction chambers was developed. The experimental temperature rates and product gas compositions are in good agreement with the simulation results based on the proposed kinetic gasification model.

  2. Coal conversion processes and analysis methodologies for synthetic fuels production. [technology assessment and economic analysis of reactor design for coal gasification

    Science.gov (United States)

    1979-01-01

    Information to identify viable coal gasification and utilization technologies is presented. Analysis capabilities required to support design and implementation of coal based synthetic fuels complexes are identified. The potential market in the Southeast United States for coal based synthetic fuels is investigated. A requirements analysis to identify the types of modeling and analysis capabilities required to conduct and monitor coal gasification project designs is discussed. Models and methodologies to satisfy these requirements are identified and evaluated, and recommendations are developed. Requirements for development of technology and data needed to improve gasification feasibility and economies are examined.

  3. Carbon formation and metal dusting in advanced coal gasification processes

    Energy Technology Data Exchange (ETDEWEB)

    DeVan, J.H.; Tortorelli, P.F.; Judkins, R.R.; Wright, I.G.

    1997-02-01

    The product gases generated by coal gasification systems contain high concentrations of CO and, characteristically, have relatively high carbon activities. Accordingly, carbon deposition and metal dusting can potentially degrade the operation of such gasifier systems. Therefore, the product gas compositions of eight representative gasifier systems were examined with respect to the carbon activity of the gases at temperatures ranging from 480 to 1,090 C. Phase stability calculations indicated that Fe{sub 3}C is stable only under very limited thermodynamic conditions and with certain kinetic assumptions and that FeO and Fe{sub 0.877}S tend to form instead of the carbide. As formation of Fe{sub 3}C is a necessary step in the metal dusting of steels, there are numerous gasifier environments where this type of carbon-related degradation will not occur, particularly under conditions associated with higher oxygen and sulfur activities. These calculations also indicated that the removal of H{sub 2}S by a hot-gas cleanup system may have less effect on the formation of Fe{sub 3}C in air-blown gasifier environments, where the iron oxide phase can exist and is unaffected by the removal of sulfur, than in oxygen-blown systems, where iron sulfide provides the only potential barrier to Fe{sub 3}C formation. Use of carbon- and/or low-alloy steels dictates that the process gas composition be such that Fe{sub 3}C cannot form if the potential for metal dusting is to be eliminated. Alternatively, process modifications could include the reintroduction of hydrogen sulfide, cooling the gas to perhaps as low as 400 C and/or steam injection. If higher-alloy steels are used, a hydrogen sulfide-free gas may be processed without concern about carbon deposition and metal dusting.

  4. Combined-cycle power stations using ``clean-coal-technologies``: Thermodynamic analysis of full gasification vs. fluidized bed combustion with partial gasification

    Energy Technology Data Exchange (ETDEWEB)

    Lozza, G.; Chiesa, P. [Politecnico di Milano, Milan (Italy). Dept. of Energetics; DeVita, L. [Eniricerche, Milan (Italy)

    1994-12-31

    A novel class of power plants for clean conversion of coal into power has been recently proposed, based on the concept of partial coal gasification and fluidized-bed combustion of unconverted char from gasification. This paper focuses on the thermodynamic aspects of these plants, in comparison with full gasification cycles, assessing their performance on the basis of a common advanced power plant technology level. Several plant configurations are considered, including pressurized or atmospheric fluidized-bed, air- or steam-cooled, with different carbon conversion in the gasifier. The calculation method, used for reproducing plant energy balances and for performance prediction, is described in the paper. A complete second-law analysis is carried out, pointing out the efficiency loss breakdown for both technologies. Results show that partial gasification plants can achieve efficiencies consistently higher than IGCC, depending on plant configuration and carbon conversion, making this solution a viable and attractive option for efficient coal utilization.

  5. Combined-cycle power stations using clean-coal technologies: Thermodynamic analysis of full gasification versus fluidized bed combustion with partial gasification

    Energy Technology Data Exchange (ETDEWEB)

    Lozza, G.; Chiesa, P. [Politecnico di Milano, Milan (Italy). Dept. of Energetics; DeVita, L. [Eniricerche, Milan (Italy)

    1996-10-01

    A novel class of power plants for clean conversion of coal into power has been recently proposed, based on the concept of partial coal gasification and fluidized-bed combustion of unconverted char from gasification. This paper focuses on the thermodynamic aspects of these plants, in comparison with full gasification cycles, assessing their performance on the basis of a common advanced power plant technology level. Several plant configurations are considered, including pressurized or atmospheric fluidized-bed, air- or steam-cooled, with different carbon conversion in the gasifier. The calculation method, used for reproducing plant energy balances and for performance prediction, is described in the paper. A complete second-law analysis is carried out, pointing out the efficiency loss breakdown for both technologies. Results show that partial gasification plants can achieve efficiencies consistently higher than IGCC, depending on plant configuration and carbon conversion, making this solution a viable and attractive option for efficient coal utilization.

  6. Catalytic gasification of char from co-pyrolysis of coal and biomass

    Energy Technology Data Exchange (ETDEWEB)

    Zhu, Wenkui [State key Laboratory of Multi-phase Complex system, the Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100080 (China); Graduate University, Chinese Academy of Sciences, Beijing 100080 (China); Song, Wenli; Lin, Weigang [State key Laboratory of Multi-phase Complex system, the Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100080 (China)

    2008-09-15

    The catalytic gasification of char from co-pyrolysis of coal and wheat straw was studied. Alkali metal salts, especially potassium salts, are considered as effective catalysts for carbon gasification by steam and CO{sub 2}, while too expensive for industry application. The herbaceous type of biomass, which has a high content of potassium, may be used as an inexpensive source of catalyst by co-processing with coal. The reactivity of chars from co-pyrolysis of coal and straw was experimentally examined. The chars were prepared in a spout-entrained reactor with different ratios of coal to straw. The gasification characteristics of chars were measured by thermogravimetric analysis (TGA). The co-pyrolysis chars revealed higher gasification reactivity than that of char from coal, especially at high level of carbon conversion. The influence of the alkali in the char and the pyrolysis temperature on the reactivity of co-pyrolysis char was investigated. The experimental results show that the co-pyrolysis char prepared at 750 C have the highest alkali concentration and reactivity. (author)

  7. The underground coal gasification First step of community collaboration; Gasification Subterranea del Carbon. Primer Intento en el Ambito de una Colaboracion Comunitaria

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-07-01

    The objective of the project was to demonstrate the technical feasibility of underground coal gasification in coal seams at 600 metre depth, in order to asses its potential as a means of energy exploitation in Europe. The trial was based on the use of deviated boreholes and a retractable injection system techniques, which have both been developed by the oil and gas industries. One borehole, the injection well, was drilled in the coal seam. The other, the vertical production well, was run to intercept it in the lower part of the coal seam as closely as possible, in order to construct a continuous channel for gasification. The well were completed with casing and concentric tubing to provide the necessary paths for production, injection, purging gas and cooling water flows. A coiled tubing located in the injection well was used to execute the retraction (or CRIP) manoeuvre, which is a process in which the injector head for the gasification agents, i. e. oxygen and water, and the ignitor, are directed to a specific section of the coal seam. The gasification products passes to a surface production line for flow measurement and sampling of gas and condensate products. Production gases were either flared or incinerated, while the liquids were collected for appropriate disposal. The first trial achieved its principal objectives of in seam drilling, channel communication, the CRIP manoeuvres and the gasification of significant quantity of coal. The post-gasification study also identified the shape and extent of the cavity. The study has demonstrated the technical feasibility of underground coal gasification at the intermediate depths of European coal and proposals are made for further development and semi-commercial exploitation of this promising extraction technology. (Author) 11 refs.

  8. Underground coal gasification: An overview of groundwater contamination hazards and mitigation strategies

    Energy Technology Data Exchange (ETDEWEB)

    Camp, David W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); White, Joshua A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-03-13

    Underground coal gasification is the in situ conversion of coal into an energy-rich product gas. It takes place deep underground, using chemical reactions to consume the coal and grow a cavity. Gas wells, drilled into the coal seam, inject reactant air, oxygen, and/or steam to sustain the reactions. Production wells then extract the product gas. Careful analysis and understanding of likely failure modes will help prevent and minimize impacts. This document provides a general description of the relevant processes, potential failure modes, and practical mitigation strategies. It can guide critical review of project design and operations.

  9. Interaction and kinetic analysis for coal and biomass co-gasification by TG-FTIR.

    Science.gov (United States)

    Xu, Chaofen; Hu, Song; Xiang, Jun; Zhang, Liqi; Sun, Lushi; Shuai, Chao; Chen, Qindong; He, Limo; Edreis, Elbager M A

    2014-02-01

    This study aims to investigate the interaction and kinetic behavior of CO2 gasification of coal, biomass and their blends by thermogravimetry analysis (TG). The gas products evolved from gasification were measured online with Fourier Transform Infrared Spectroscopy (FTIR) coupled with TG. Firstly, TG experiments indicated that interaction between the coals and biomasses mainly occurred during co-gasification process. The most significant synergistic interaction occurred for LN with SD at the blending mass ratio 4:1. Furthermore, thermal kinetic analysis indicated that the activation energy involved in co-gasification decreased as the SD content increased until the blending ratio of SD with coal reached 4:1. The rise of the frequency factor indicated that the increase of SD content favored their synergistic interaction. Finally, FTIR analysis of co-gasification of SD with LN indicated that except for CO, most gases including CH3COOH, C6H5OH, H2O, etc., were detected at around 50-700°C. Copyright © 2014. Published by Elsevier Ltd.

  10. Mathematical model for the gasification of coal under pressure

    Energy Technology Data Exchange (ETDEWEB)

    Biba, V.; Macak, J.; Kloss, E.; Malecha, J.

    1978-01-01

    A mathematical model for the the high-pressure gasification of solid fuels in the charged layer is presented which permits the quantitative description of the the static behavior of the generator. Deals with the parameters of reaction kinetics and of the transfer of matter and energy which are necessary for developing the model of a fixed-bed reactor. To obtain a practical model, simplifications are needed which concern the gasification, degasification, and drying processes. They are dealt with individually. For calculating the concentration and temperature profiles for the solid and gas phases along the gasification bed height, a system of differential equations was obtained which was supplemented by some algebraic equations.

  11. EVALUATION OF BIOMASS AND COAL CO-GASIFICATION OF BRAZILIAN FEEDSTOCK USING A CHEMICAL EQUILIBRIUM MODEL

    Directory of Open Access Journals (Sweden)

    R. Rodrigues

    Full Text Available Abstract Coal and biomass are energy sources with great potential for use in Brazil. Coal-biomass co-gasification enables the combination of the positive characteristics of each fuel, besides leading to a cleaner use of coal. The present study evaluates the potential of co-gasification of binary coal-biomass blends using sources widely available in Brazil. This analysis employs computational simulations using a reliable thermodynamic equilibrium model. Favorable operational conditions at high temperatures are determined in order to obtain gaseous products suitable for energy cogeneration and chemical synthesis. This study shows that blends with biomass ratios of 5% and equivalence ratios ≤ 0.3 lead to high cold gas efficiencies. Suitable gaseous products for chemical synthesis were identified at biomass ratios ≤ 35% and moisture contents ≥ 40%. Formation of undesirable nitrogen and sulfur compounds was also analyzed.

  12. Non-catalytic co-gasification of sub-bituminous coal and biomass

    Science.gov (United States)

    Nyendu, Guevara Che

    Fluidization characteristics and co-gasification of pulverized sub-bituminous coal, hybrid poplar wood, corn stover, switchgrass, and their mixtures were investigated. Co-gasification studies were performed over temperature range from 700°C to 900°C in different media (N2, CO2, steam) using a bubbling fluidized bed reactor. In fluidization experiments, pressure drop (Delta P) observed for coal-biomass mixtures was higher than those of single coal and biomass bed materials in the complete fluidization regime. There was no systematic trend observed for minimum fluidization velocity ( Umf) with increasing biomass content. However, porosity at minimum fluidization (εmf) increased with increasing biomass content. Channeling effects were observed in biomass bed materials and coal bed with 40 wt.% and 50 wt.% biomass content at low gas flowrates. The effect of coal pressure overshoot reduced with increasing biomass content. Co-gasification of coal and corn stover mixtures showed minor interactions. Synergetic effects were observed with 10 wt.% corn stover. Coal mixed with corn stover formed agglomerates during co-gasification experiments and the effect was severe with increase in corn stover content and at 900°C. Syngas (H2 + CO) concentrations obtained using CO2 as co-gasification medium were higher (~78 vol.% at 700°C, ~87 vol.% at 800°C, ~93 vol.% at 900°C) than those obtained with N2 medium (~60 vol.% at 700°C, ~65 vol.% at 800°C, ~75 vol.% at 900°C). Experiments involving co-gasification of coal with poplar showed no synergetic effects. Experimental yields were identical to predicted yields. However, synergetic effects were observed on H2 production when steam was used as the co-gasification medium. Additionally, the presence of steam increased H2/CO ratio up to 2.5 with 10 wt.% hybrid poplar content. Overall, char and tar yields decreased with increasing temperature and increasing biomass content, which led to increase in product gas.

  13. Low/medium Btu coal-gasification assessment program for potential users in New Jersey. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bianco, J. [BRISC; Schavlan, S. [BRISC; Ku, W. S. [PSE& G; Piascik, T. M. [PSE& G; Hynds, J. A. [PSE& G; West, A. [SDC

    1981-01-01

    In order to evaluate the potential for coal utilization, a preliminary technical and economic assessment of district coal gasification in New Jersey was conducted. This evaluation addressed the possibility of installing a coal gasification plant to use a high sulfur eastern coal to produce a medium Btu content gas (MBG) having a heating value of approximately 300 Btu/SCF. In addition, the work also appraised the regulatory, environmental and marketing, and financial considerations of such a facility. The preliminary study evaluation has manifested an overall technical and economic feasibility for producing a medium Btu quality gas (MBG) from coal at PSE and G's Sewaren Generating Station in New Jersey. The production of MBG for use in on-site power plant boilers or for distribution to industrial customers appears to be economically attractive. The economic attractiveness of MBG is very dependent on the location of sufficient numbers of industrial customers near the gasification facilities and on high utilization of the gasification plant. The Sewaren Generating Station was identified as potentially the most suitable site for a gasification plant. The Texaco Coal Gasification Process was selected as the gasifier type due to a combination of efficiency and pilot plant experience. It is projected that a nominal 2000 tons-per-day coal gasification plant would supply supplemental utility boiler fuel, fuel grade methanol and some by-products.

  14. Simulation of circulating fluidized bed gasification for characteristic study of pakistani coal

    Directory of Open Access Journals (Sweden)

    Ramzan Naveed

    2015-03-01

    Full Text Available A process model for turbulent pressurized circulating fluidized-bed coal gasifier is created using ASPEN PLUS software. Both hydrodynamic and reaction kinetics parameter are taken into account, whose expressions for fluidized bed are adopted from the literature. Various reactor models available in ASPEN PLUS with calculator as External Block are nested to solve hydrodynamics and kinetics. Multiple operational parameters for a pilot-plant circulating fluidized-bed coal gasifier are used to demonstrate the effects on coal gasification characteristics. This paper presents detailed information regarding the simulation model, including robust analysis of the effect of stoichiometric ratio, steam to coal ratio, gasification temperature and gasification agent temperature. It is observed that, with the increase in the flow rate of air, the components hydrogen, carbon monoxide, carbon dioxide and methane reduce, which causes the Lower Heating Value (LHV of synthesis gas (Syn. Gas to decrease by about 29.3%, while increment in the steam flow rate shows a minute increase in heating value of only 0.8%. Stoichiometric ratio has a direct relationship to carbon conversion efficiency and carbon dioxide production. Increasing the steam to coal ratio boosts the production of hydrogen and carbon monoxide, and causes a drop in both carbon dioxide concentration and the conversion efficiency of carbon. High gasifying agent temperature is desired because of high concentration of CO and H2, increasing carbon conversion and LHV. A high gasifying agent temperature is the major factor that affects the coal gasification to enhance H2 and CO production rapidly along with other gasification characteristics.

  15. Experimental and Modeling Investigation of Coal Gasification in a Fluidized Bed Reactor

    Institute of Scientific and Technical Information of China (English)

    CuiLin; ShenYouting; 等

    1996-01-01

    This paper presents a new approach to study the process of coal gasification.Non-linear programming techniques are used to determine the value of the model parameters that depends on coal species and experimental conditions and thus minimize the difference between experimental results and model predictions.Model predictions being in good agreement with the experimental results show that this method of combining model with experiment is effective for modeling complex processes.

  16. Conceptual design study of a coal gasification combined-cycle powerplant for industrial cogeneration

    Science.gov (United States)

    Bloomfield, H. S.; Nelson, S. G.; Straight, H. F.; Subramaniam, T. K.; Winklepleck, R. G.

    1981-01-01

    A conceptual design study was conducted to assess technical feasibility, environmental characteristics, and economics of coal gasification. The feasibility of a coal gasification combined cycle cogeneration powerplant was examined in response to energy needs and to national policy aimed at decreasing dependence on oil and natural gas. The powerplant provides the steam heating and baseload electrical requirements while serving as a prototype for industrial cogeneration and a modular building block for utility applications. The following topics are discussed: (1) screening of candidate gasification, sulfur removal and power conversion components; (2) definition of a reference system; (3) quantification of plant emissions and waste streams; (4) estimates of capital and operating costs; and (5) a procurement and construction schedule. It is concluded that the proposed powerplant is technically feasible and environmentally superior.

  17. Kosova coal gasification plant health effects study: Volume 3, Retrospective epidemiology

    Energy Technology Data Exchange (ETDEWEB)

    Morris, S.C.; Haxhiu, M.A.; Canhasi, B.; Begraca, M.; Ukmata, H.

    1987-12-01

    Disease incidence in coal gasification plant workers in Kosova, Yugoslavia, was compared to that in lignite surface miners who received medical care in the same clinic. No statistically significant difference in incidence rate was found for any of twelve disease categories examined. Early development of a high skin cancer rate, as reported within five years of first exposure at a coal hydrogenation plant in Institute, West Virginia, did not occur. Exploratory analysis indicated trends among gasification plant workers in disease incidence with increasing years of service and increasing occupational exposure levels for chronic bronchitis and mental diseases. Particulate exposures in workers' homes were of the same order as exposures at the gasification plant and further study of residential air pollution levels is recommended. 21 refs., 2 figs., 80 tabs.

  18. Meditation on the construction of exemplar plant for briquetted coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Zhou Kuiyi [China National Coal Industry Import and Export Corporation, Beijing (China)

    1997-12-31

    China uses a considerable amount of anthracite, but the fines from anthracite mining are not sufficiently used. This project involved the construction of a plant for the manufacture of anthracite briquettes under high pressure, for use in gasification plants. The characteristics of the coals used and the types of briquette formed are described. 2 tabs.

  19. Exergy Analysis of Methanol-IGCC Polygeneration Technology Based on Coal Gasification

    Institute of Scientific and Technical Information of China (English)

    段远源; 张晋; 史琳; 朱明善; 韩礼钟

    2002-01-01

    Polygeneration is a key strategy for making ultra-clean energy products highly competitive with conventional energy systems. A polygeneration system based on coal gasification was analyzed using the exergy method to calculate the system thermal efficiency. The results show that the polygeneration system has less pollutants and higher efficiency than the separate systems.

  20. Enhanced anaerobic biodegradability of real coal gasification wastewater with methanol addition.

    Science.gov (United States)

    Wang, Wei; Han, Hongjun; Yuan, Min; Li, Huiqiang

    2010-01-01

    Coal gasification effluent is a typical refractory industrial wastewater with a very poor anaerobic biodegradability due to its toxicity. Methanol was introduced to improve anaerobic biodegradability of real coal gasification wastewater, and the effect of methanol addition on the performance was investigated in a mesophilic upflow anaerobic sludge bed reactor with a hydraulic retention time of 24 hr. Experimental results indicated that anaerobic treatment of coal gasification wastewater was feasible with the addition of methanol. The corresponding maximum COD and phenol removal rates were 71% and 75%, respectively, with methanol concentration of 500 mg COD/L for a total organic loading rate of 3.5 kg COD/(m3 x day) and a phenol loading rate of 0.6 kg/(m3 x day). The phenol removal rate was not improved with a higher methanol concentration of 1000 mg COD/L. Substrate utilization rate (SUR) tests indicated that the SURs of phenol were 106, 132, and 83 mg phenol/(g VSS x day) at methanol concentrations of 250, 500, and 1000 mg COD/L, respectively, and only 45 mg phenol/(g VSS x day) in the control reactor. The presence of methanol could reduce the toxicity of coal gasification wastewater and increase the biodegradation of phenolic compounds.

  1. Energetic analysis and optimisation of an integrated coal gasification-combined cycle power plant

    NARCIS (Netherlands)

    Vlaswinkel, E.E.

    1992-01-01

    Methods are presented to analyse and optimise the energetic performance of integrated coal gasification-combined cycle (IGCC) power plants. The methods involve exergy analysis and pinch technology and can be used to identify key process parameters and to generate alternative design options for impro

  2. Novel plasma arc reactor with molted metal electrodes for coal gasification technology

    Energy Technology Data Exchange (ETDEWEB)

    Predtechensky, M.R.; Kuropyatnik, I.N.; Tukhto, O.M. [International Scientific Center on Thermophysics and Energetics, Novosibirsk, Russia Institute of Thermophysics SB RAS, Novosibirsk (Russian Federation)

    2001-07-01

    The process of steam gasification of coal has been studied using the new type of plasma chemical reactor with molten metal electrodes. Using of molten metal electrodes allows to increase significantly the continuous operation of the plasma arc reactor and to realize some additional advantages. (authors)

  3. Effects of coal combustion and gasification upon lung structure and function. Quarterly progress report

    Energy Technology Data Exchange (ETDEWEB)

    Hinton, Dr., David E.

    1980-12-12

    The effects on lungs of emissions from fluidized-bed combustion and coal gasification on man are being studied by inhalation experiments and intratracheal administration of fly ash to hamsters. The hamsters are sacrificed at 1, 3, 6, 9 and 30 days and the lungs examined by methods which are described. (LTN)

  4. Coal Gasification Unit Using CO2 as Gasifying Agent Developed by Shell

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The Zhongyuan Dahua Group of Henan province has announced that the first in the world Shell's coal gasification unit using CO2 as the gasifying agent has been operating successfully,delivering syngas produced by the gasifier to fully meet the needs for methanol synthesis,which can increase the methanol output by 200 tons a day under full load of the methanol unit.

  5. Subtask 4.2 - Coal Gasification Short Course

    Energy Technology Data Exchange (ETDEWEB)

    Kevin Galbreath

    2009-06-30

    Major utilities, independent power producers, and petroleum and chemical companies are intent on developing a fleet of gasification plants primarily because of high natural gas prices and the implementation of state carbon standards, with federal standards looming. Currently, many projects are being proposed to utilize gasification technologies to produce a synthesis gas or fuel gas stream for the production of hydrogen, liquid fuels, chemicals, and electricity. Financing these projects is challenging because of the complexity, diverse nature of gasification technologies, and the risk associated with certain applications of the technology. The Energy & Environmental Research Center has developed a gasification short course that is designed to provide technical personnel with a broad understanding of gasification technologies and issues, thus mitigating the real or perceived risk associated with the technology. Based on a review of research literature, tutorial presentations, and Web sites on gasification, a short course presentation was prepared. The presentation, consisting of about 500 PowerPoint slides, provides at least 7 hours of instruction tailored to an audience's interests and needs. The initial short course is scheduled to be presented September 9 and 10, 2009, in Grand Forks, North Dakota.

  6. Thermogravimetric and model-free kinetic studies on CO2 gasification of low-quality, high-sulphur Indian coals

    Science.gov (United States)

    Das, Tonkeswar; Saikia, Ananya; Mahanta, Banashree; Choudhury, Rahul; Saikia, Binoy K.

    2016-10-01

    Coal gasification with CO2 has emerged as a cleaner and more efficient way for the production of energy, and it offers the advantages of CO2 mitigation policies through simultaneous CO2 sequestration. In the present investigation, a feasibility study on the gasification of three low-quality, high-sulphur coals from the north-eastern region (NER) of India in a CO2 atmosphere using thermogravimetric analysis (TGA-DTA) has been made in order to have a better understanding of the physical and chemical characteristics in the process of gasification of coal. Model-free kinetics was applied to determine the activation energies (E) and pre-exponential factors (A) of the CO2 gasification process of the coals. Multivariate non-linear regression analyses were performed to find out the formal mechanisms, kinetic model, and the corresponding kinetic triplets. The results revealed that coal gasification with CO2 mainly occurs in the temperature range of 800∘-1400∘C and a maximum of at around 1100∘C. The reaction mechanisms responsible for CO2 gasification of the coals were observed to be of the ` nth order with autocatalysis (CnB)' and ` nth order (Fn) mechanism'. The activation energy of the CO2 gasification was found to be in the range 129.07-146.81 kJ mol-1.

  7. Thermogravimetric and model-free kinetic studies on CO2 gasification of low-quality, high-sulphur Indian coals

    Indian Academy of Sciences (India)

    Tonkeswar Das; Ananya Saikia; Banashree Mahanta; Rahul Choudhury; Binoy K Saikia

    2016-10-01

    Coal gasification with CO$_2$ has emerged as a cleaner and more efficient way for the production of energy, and it offers the advantages of CO$_2$ mitigation policies through simultaneous CO$_2$ sequestration. In the present investigation, a feasibility study on the gasification of three low-quality, high-sulphur coals fromthe north-eastern region (NER) of India in a CO$_2$ atmosphere using thermogravimetric analysis (TGADTA) has been made in order to have a better understanding of the physical and chemical characteristics in the process of gasification of coal. Model-free kinetics was applied to determine the activation energies (E) and pre-exponential factors (A) of the CO$_2$ gasification process of the coals. Multivariate nonlinear regression analyses were performed to find out the formal mechanisms, kinetic model, and the corresponding kinetic triplets. The results revealed that coal gasification with CO$_2$ mainly occurs in the temperature range of 800◦–1400◦C and a maximum of at around 1100◦C. The reaction mechanisms responsible for CO$_2$ gasification of the coals were observed to be of the ‘nth order with autocatalysis (CnB)’ and ‘nth order (Fn) mechanism’. The activation energy of the CO$_2$ gasification was found to be in the range 129.07–146.81 kJ mol$^{−1}$.

  8. Interaction and its induced inhibiting or synergistic effects during co-gasification of coal char and biomass char.

    Science.gov (United States)

    Ding, Liang; Zhang, Yongqi; Wang, Zhiqing; Huang, Jiejie; Fang, Yitian

    2014-12-01

    Co-gasification of coal char and biomass char was conducted to investigate the interactions between them. And random pore model (RPM) and modified random pore model (MRPM) were applied to describe the gasification behaviors of the samples. The results show that inhibiting effect was observed during co-gasification of corn stalk char with Hulunbeier lignite coal char, while synergistic effects were observed during co-gasification of corn stalk char with Shenmu bituminous coal char and Jincheng anthracite coal char. The inhibiting effect was attributed to the intimate contact and comparable gasification rate between biomass char and coal char, and the loss of the active form of potassium caused by the formation of KAlSiO4, which was proved to be inactive during gasification. While the synergistic effect was caused by the high potassium content of biomass char and the significant difference of reaction rate between coal char and biomass char during gasification. Copyright © 2014 Elsevier Ltd. All rights reserved.

  9. Calculation of the fixed bed coal gasification regimes by the use of thermodynamic model with macrokinetic constraints

    Science.gov (United States)

    Donskoi, I. G.; Keiko, A. V.; Kozlov, A. N.; Svishchev, D. A.; Shamanskii, V. A.

    2013-12-01

    We discuss an equilibrium model of a fixed-bed solid fuel gasification process that takes into account macrokinetic constraints imposed on the rates of heterophase processes and allows the pyrolysis and gasification processes to be described in a fairly simple manner with the use of thermal analysis data. The results of calculations are compared with the measured parameters characterizing the Azeisk coal steam-air gasification process that were obtained in experiments on a laboratory setup.

  10. Numerical and experimental study of strata behavior and land subsidence in an underground coal gasification project

    Science.gov (United States)

    Sirdesai, N. N.; Singh, R.; Singh, T. N.; Ranjith, P. G.

    2015-11-01

    Underground Coal Gasification, with enhanced knowledge of hydrogeological, geomechanical and environmental aspects, can be an alternative technique to exploit the existing unmineable reserves of coal. During the gasification process, petro-physical and geomechanical properties undergo a drastic change due to heating to elevated temperatures. These changes, caused due to the thermal anisotropy of various minerals, result in the generation of thermal stresses; thereby developing new fracture pattern. These fractures cause the overhead rock strata to cave and fill the gasification chamber thereby causing subsidence. The degree of subsidence, change in fluid transport and geomechanical properties of the rock strata, in and around the subsidence zone, can affect the groundwater flow. This study aims to predict the thermo-geomechanical response of the strata during UCG. Petro-physical and geomechanical properties are incorporated in the numerical modelling software COMSOL Multiphysics and an analytical strength model is developed to validate and further study the mechanical response and heat conduction of the host rock around the gasification chamber. Once the problems are investigated and solved, the enhanced efficiency and the economic exploitation of gasification process would help meet country's energy demand.

  11. A back analysis of the temperature field in the combustion volume space during underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Chen Liang; Hou Chaohu; Chen Jiansheng; Xu Jiting

    2011-01-01

    The exact shape and size of the gasification channel during underground coal gasification (UGC) are of vital importance for the safety and stability of the upper parts of the geological formation.In practice existing geological measurements are insufficient to obtain such information because the coal seam is typically deeply buried and the geological conditions are often complex.This paper introduces a cylindrical model for the gasification channel.The rock and soil masses are assumed to be homogeneous and isotropic and the effect of seepage on the temperature field was neglected.The theory of heat conduction was used to write the equation predicting the temperature field around the gasification channel.The idea of an excess temperature was introduced to solve the equations.Applying this model to UCG in the field for an influence radius,r,of 70 m gave the model parameters,u1,2.3..,of 2.4,5.5,8.7...By adjusting the radius (2,4,or 6 m) reasonable temperatures of the gasification channel were found for 4 m.The temperature distribution in the vertical direction,and the combustion volume,were also calculated.Comparison to field measurements shows that the results obtained from the proposed model are very close to practice.

  12. Effects of fluxing agents on gasification reactivity and gas composition of high ash fusion temperature coal

    Directory of Open Access Journals (Sweden)

    Zhao Ruifang

    2015-01-01

    Full Text Available A Na-based fluxing agent Na2O (NBFA and a composite fluxing agent (mixture of CaO and Fe2O3 with mass ratio of 3:1, CFA for short were used to decrease the ash fusion temperature of the Dongshan and Xishan coal from Shanxi of China and make these coal meet the requirements of the specific gasification process. The main constituents of the fluxing agents used in this study can play a catalyst role in coal gasification. So it is necessary to understand the effect of fluxing agents on coal gasification reactivity and gas composition. The results showed that the ash fusion temperature of the two coal used decreased to the lowest point due to the eutectic phenomenon when 5 wt% of CFA or NBFA was added. Simultaneously, the gas molar ratio of H2/CO changed when CFA was added. A key application was thus found where the gas molar ratio of H2/CO can be adjusted by controlling the fluxing agent amount to meet the synthetic requirements for different chemical products.

  13. Co-gasification of Colombian coal and biomass in fluidized bed: An experimental study

    Energy Technology Data Exchange (ETDEWEB)

    Jhon F. Velez; Farid Chejne; Carlos F. Valdes; Eder J. Emery; Carlos A. Londono [Universidad Nacional de Colombia, Antioquia (Colombia). Grupo de Termodinamica Aplicada y Energias Alternativas

    2009-03-15

    The main results of an experimental work on co-gasification of Colombian biomass/coal blends in a fluidized bed working at atmospheric pressure are reported in this paper. Several samples of blends were prepared by mixing 6-15wt% biomass (sawdust, rice or coffee husk) with coal. Experimental assays were carried out by using mixtures of different steams/blends (Rvc) and air/blend (Rac) ratios showing the feasibility to implement co-gasification as energetic alternative to produce fuel gas to heat and to generate electricity and the possibility of converting clean and efficiently the refuse coal to a low-heating value gas. 29 refs., 5 figs., 4 tabs.

  14. Assessment of coal gasification/hot gas cleanup based advanced gas turbine systems

    Energy Technology Data Exchange (ETDEWEB)

    1990-12-01

    The major objectives of the joint SCS/DOE study of air-blown gasification power plants with hot gas cleanup are to: (1) Evaluate various power plant configurations to determine if an air-blown gasification-based power plant with hot gas cleanup can compete against pulverized coal with flue gas desulfurization for baseload expansion at Georgia Power Company's Plant Wansley; (2) determine if air-blown gasification with hot gas cleanup is more cost effective than oxygen-blown IGCC with cold gas cleanup; (3) perform Second-Law/Thermoeconomic Analysis of air-blown IGCC with hot gas cleanup and oxygen-blown IGCC with cold gas cleanup; (4) compare cost, performance, and reliability of IGCC based on industrial gas turbines and ISTIG power island configurations based on aeroderivative gas turbines; (5) compare cost, performance, and reliability of large (400 MW) and small (100 to 200 MW) gasification power plants; and (6) compare cost, performance, and reliability of air-blown gasification power plants using fluidized-bed gasifiers to air-blown IGCC using transport gasification and pressurized combustion.

  15. Gasification of coal-derived chars in synthesis gas mixtures under intraparticle mass-transfer-controlled conditions

    NARCIS (Netherlands)

    Bliek, A.; Lont, J.C.; van Swaaij, Willibrordus Petrus Maria

    1986-01-01

    A model has been formulated to describe the quasi-steady-state gasification of coal-derived chars in gas mixtures where both the reactants carbon dioxide and steam, and the gasification products carbon monoxide and hydrogen are present. As such, these conditions reflect the situation found in most

  16. The influence of catalytic additives on kinetics of coal gasification process

    Directory of Open Access Journals (Sweden)

    Zubek Katarzyna

    2017-01-01

    Full Text Available Catalytic coal gasification is a process that has the potential to become one of the efficient industrial technology of energy production. For this reason, the subject of this study was to analyze the kinetics of catalytic gasification of ‘Janina’ coal with steam. Isothermal measurements were performed at 800 °C, 900 °C, 950 °C and 1000 °C at a pressure of 1 MPa using cations of sodium, potassium and calcium as catalysts. During examination the thermovolumetric method was used. This method allows to determine the formation rates of a gaseous product such as carbon monoxide, hydrogen, methane and carbon dioxide as well as their contribution to the resulting gas. Moreover, the influence of catalysts on the kinetics of CO and H2 formation at various temperatures was determined and the kinetics parameters were calculated with the use of isoconversional model, Random Pore Model and Grain Model. The obtained results confirmed the positive effect of catalysts on the coal gasification process. The catalytic measurements were characterized by higher reaction rate and shorter duration of the process, and the calculated values of the kinetic parameters were lower than for the gasification process without the addition of catalysts.

  17. Product Characterization for Entrained Flow Coal/Biomass Co-Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Maghzi, Shawn [General Electric Global Research, Niskayuna, NY (United States); Subramanian, Ramanathan [General Electric Global Research, Niskayuna, NY (United States); Rizeq, George [General Electric Global Research, Niskayuna, NY (United States); Singh, Surinder [General Electric Global Research, Niskayuna, NY (United States); McDermott, John [General Electric Global Research, Niskayuna, NY (United States); Eiteneer, Boris [General Electric Global Research, Niskayuna, NY (United States); Ladd, David [General Electric Global Research, Niskayuna, NY (United States); Vazquez, Arturo [General Electric Global Research, Niskayuna, NY (United States); Anderson, Denise [General Electric Global Research, Niskayuna, NY (United States); Bates, Noel [General Electric Global Research, Niskayuna, NY (United States)

    2011-12-11

    The U.S. Department of Energy's National Energy Technology Laboratory (DOE NETL) is exploring affordable technologies and processes to convert domestic coal and biomass resources to high-quality liquid hydrocarbon fuels. This interest is primarily motivated by the need to increase energy security and reduce greenhouse gas emissions in the United States. Gasification technologies represent clean, flexible and efficient conversion pathways to utilize coal and biomass resources. Substantial experience and knowledge had been developed worldwide on gasification of either coal or biomass. However, reliable data on effects of blending various biomass fuels with coal during gasification process and resulting syngas composition are lacking. In this project, GE Global Research performed a complete characterization of the gas, liquid and solid products that result from the co-gasification of coal/biomass mixtures. This work was performed using a bench-scale gasifier (BSG) and a pilot-scale entrained flow gasifier (EFG). This project focused on comprehensive characterization of the products from gasifying coal/biomass mixtures in a high-temperature, high-pressure entrained flow gasifier. Results from this project provide guidance on appropriate gas clean-up systems and optimization of operating parameters needed to develop and commercialize gasification technologies. GE's bench-scale test facility provided the bulk of high-fidelity quantitative data under temperature, heating rate, and residence time conditions closely matching those of commercial oxygen-blown entrained flow gasifiers. Energy and Environmental Research Center (EERC) pilot-scale test facility provided focused high temperature and pressure tests at entrained flow gasifier conditions. Accurate matching of syngas time-temperature history during cooling ensured that complex species interactions including homogeneous and heterogeneous processes such as particle nucleation, coagulation, surface condensation

  18. Product Characterization for Entrained Flow Coal/Biomass Co-Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Maghzi, Shawn; Subramanian, Ramanathan; Rizeq, George; Singh, Surinder; McDermott, John; Eiteneer, Boris; Ladd, David; Vazquez, Arturo; Anderson, Denise; Bates, Noel

    2011-09-30

    The U.S. Department of Energy‘s National Energy Technology Laboratory (DOE NETL) is exploring affordable technologies and processes to convert domestic coal and biomass resources to high-quality liquid hydrocarbon fuels. This interest is primarily motivated by the need to increase energy security and reduce greenhouse gas emissions in the United States. Gasification technologies represent clean, flexible and efficient conversion pathways to utilize coal and biomass resources. Substantial experience and knowledge had been developed worldwide on gasification of either coal or biomass. However, reliable data on effects of blending various biomass fuels with coal during gasification process and resulting syngas composition are lacking. In this project, GE Global Research performed a complete characterization of the gas, liquid and solid products that result from the co-gasification of coal/biomass mixtures. This work was performed using a bench-scale gasifier (BSG) and a pilot-scale entrained flow gasifier (EFG). This project focused on comprehensive characterization of the products from gasifying coal/biomass mixtures in a high-temperature, high-pressure entrained flow gasifier. Results from this project provide guidance on appropriate gas clean-up systems and optimization of operating parameters needed to develop and commercialize gasification technologies. GE‘s bench-scale test facility provided the bulk of high-fidelity quantitative data under temperature, heating rate, and residence time conditions closely matching those of commercial oxygen-blown entrained flow gasifiers. Energy and Environmental Research Center (EERC) pilot-scale test facility provided focused high temperature and pressure tests at entrained flow gasifier conditions. Accurate matching of syngas time-temperature history during cooling ensured that complex species interactions including homogeneous and heterogeneous processes such as particle nucleation, coagulation, surface condensation, and

  19. Gasification of biomass and coal in a pressurised fluidised bed gasifier

    Energy Technology Data Exchange (ETDEWEB)

    Andries, J.; Jong, W. de; Hein, K.R.G. [Technische Univ. Delft (Netherlands)

    1998-09-01

    During a 3 year (1996-1998) multinational JOULE project, partly funded by the EU, experimental and theoretical research is being done on co-gasification of biomass (pelletised straw and Miscanthus) and coal in a pressurised fluidised bed reactor. The influence of feedstock and operating conditions on gasification characteristics has been studied using a 1.5 MW{sub th} gasifier, which has been operated at a pressure of 5 bar and temperatures up to 900 C. The project and the test rig are described and results obtained in the first part of the project are presented and analysed. (orig.)

  20. Material and Energy Flow Analysis (Mefa of the Unconventional Method of Electricity Production Based on Underground Coal Gasification

    Directory of Open Access Journals (Sweden)

    Krystyna Czaplicka-Kolarz

    2014-01-01

    Originality/value: This is the first approach which contains a whole chain of electricity production from Underground Coal Gasification, including stages of gas cleaning, electricity production and the additional capture of carbon dioxide.

  1. Valve development for coal gasification plants. Phase II. Monthly/quarterly technical program report, January--March 1979

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1979-04-01

    The eleventh in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program discusses engineering progress during the period of January to March 1979.

  2. Assessment of underground coal gasification in bituminous coals: potential UCG products and markets. Final report, Phase I

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-01-31

    The following conclusions were drawn from the study: (1) The US will continue to require new sources of energy fuels and substitutes for petrochemical feedstocks into the foreseeable future. Most of this requirement will be met using coal. However, the cost of mining, transporting, cleaning, and preparing coal, disposing of ash or slag and scrubbing stack gases continues to rise; particularly, in the Eastern US where the need is greatest. UCG avoids these pitfalls and, as such, should be considered a viable alternative to the mining of deeper coals. (2) Of the two possible product gases LBG and MBG, MBG is the most versatile. (3) The most logical use for UCG product in the Eastern US is to generate power on-site using a combined-cycle or co-generation system. Either low or medium Btu gas (LBG or MBG) can be used. (4) UCG should be an option whenever surface gasification is considered; particularly, in areas where deeper, higher sulfur coal is located. (5) There are environmental and social benefits to use of UCG over surface gasification in the Eastern US. (6) A site could be chosen almost anywhere in the Illinois and Ohio area where amenable UCG coal has been determined due to the existence of existing transportation or transmission systems. (7) The technology needs to be demonstrated and the potential economic viability determined at a site in the East-North-Central US which has commercial quantities of amenable bituminous coal before utilities will show significant interest.

  3. TVA coal-gasification commercial demonstration plant project. Volume 5. Plant based on Koppers-Totzek gasifier. Final report

    Energy Technology Data Exchange (ETDEWEB)

    1980-11-01

    This volume presents a technical description of a coal gasification plant, based on Koppers-Totzek gasifiers, producing a medium Btu fuel gas product. Foster Wheeler carried out a conceptual design and cost estimate of a nominal 20,000 TPSD plant based on TVA design criteria and information supplied by Krupp-Koppers concerning the Koppers-Totzek coal gasification process. Technical description of the design is given in this volume.

  4. Evaluation of Coal Gasification/Combined Cycle Power Plant Feasibility at the Sewells Point Naval Complex, Norfolk, Virginia.

    Science.gov (United States)

    1981-07-01

    This study evaluates the feasibility of installing a coal gasification /combined cycle cogeneration plant at Sewells Point Naval Complex, Norfolk...fired cogeneration cycles. The utility interface, site considerations and economic analyses are also presented. The study includes that a coal ... gasification /combined cycle cogeneration plant supplying 50 MW of electric power and 290,000 lb/hr of steam is technically feasible. (Author)

  5. Evaluation of Coal Gasification/Combined Cycle Power Plant Feasibility at the Sewells Point Naval Complex, Norfolk, Virginia. Summary.

    Science.gov (United States)

    1981-07-01

    This study evaluates the feasibility of installing a coal gasification /combined cycle cogeneration plant at Sewells Point Naval Complex, Norfolk...fired cogeneration cycles. The utility interface, site considerations and economic analyses are also presented. The study concludes that a coal ... gasification /combined cycle cogeneration plant supplying 50 MW of electric power and 290,000 lb/hr of steam is technically feasible. (Author)

  6. Retention of arsenic and selenium compounds using limestone in a coal gasification flue gas.

    Science.gov (United States)

    Diaz-Somoano, Mercedes; Martinez-Tarazona, M Rosa

    2004-02-01

    Volatile arsenic and selenium compounds present in coals may cause environmental problems during coal combustion and gasification. A possible way to avoid such problems may be the use of solid sorbents capable of retaining these elements from flue gases in gas cleaning systems. Lime and limestone are materials that are extensively employed for the capture of sulfur during coal processing. Moreover, they have also proven to have good retention characteristics for arsenic and selenium during combustion. The aim of this work was to ascertain whether this sorbent is also useful for retaining arsenic and selenium species in gases produced in coal gasification. The study was carried out in a laboratory-scale reactor in which the sorbent was employed as a fixed bed, using synthetic gas mixtures. In these conditions, retention capacities for arsenic may reach 17 mg g(-1) in a gasification atmosphere free of H2S, whereas the presence of H2S implies a significant decrease in arsenic retention. In the case of selenium, H2S does not influence retention which may reach 65 mg g(-1). Post-retention sorbent characterization, thermal stability, and water solubility tests have shown that chemical reaction is one of the mechanisms responsible for the capture of arsenic and selenium, with Ca(AsO2)2 and CaSe being the main compounds formed.

  7. The Scientific Development of Coal Gasification Process%煤气化的科学发展

    Institute of Scientific and Technical Information of China (English)

    张斌

    2011-01-01

    煤气化是一种大型化、适用煤种广、低成本、低污染和易净化气体的技术。文章介绍了煤气化技术发展的前景,着重介绍等离子体煤气化制合成气,焦炉煤气转化为合成气等技术,并且介绍煤气化技术在多级联产,合成醇醚燃料和电力方面的应用,根据现有状况预测其发展趋势。%Coal gasification process is a large-scale process technology, which has the benefits of low cost. low pollution and more adaptability in coal type. It can also produce gas which is easy to purify. The article introduces the prospect of Coal gasification process, and highlights the technology of synthetic gas which is produced by plasma coal gasification process and by the conversion of the coke oven gas, and also introduces the application in synthetic alcohol ether fuel and power fields, and predicts the development trends.

  8. Theoretical and experimental studies of fixed-bed coal gasification reactors. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Joseph, B.; Bhattacharya, A.; Salam, L.; Dudukovic, M.P.

    1983-09-01

    A laboratory fixed-bed gasification reactor was designed and built with the objective of collecting operational data for model validation and parameter estimation. The reactor consists of a 4 inch stainless steel tube filled with coal or char. Air and steam is fed at one end of the reactor and the dynamic progress of gasification in the coal or char bed is observed through thermocouples mounted at various radial and axial locations. Product gas compositions are also monitored as a function of time. Results of gasification runs using Wyoming coal are included in this report. In parallel with the experimental study, a two-dimensional model of moving bed gasifiers was developed, coded into a computer program and tested. This model was used to study the laboratory gasifier by setting the coal feed rate equal to zero. The model is based on prior work on steady state and dynamic modeling done at Washington University and published elsewhere in the literature. Comparisons are made between model predictions and experimental results. These are also included in this report. 23 references, 18 figures, 6 tables.

  9. Slag Behavior in Gasifiers. Part I: Influence of Coal Properties and Gasification Conditions

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2013-02-01

    Full Text Available In the entrained-flow gasifiers used in integrated gasification combined cycle (IGCC plants, the majority of mineral matter transforms to liquid slag on the wall of the gasifier and flows out the bottom. However, a small fraction of the mineral matter is entrained (as fly ash with the raw syngas out of the gasifier to downstream processing. This molten/sticky fly ash could cause fouling of the syngas cooler. To improve gasification availability through better design and operation of the gasification process, a better understanding of slag behavior and the characteristics of the slagging process is needed. Char/ash properties, gas compositions in the gasifier, the gasifier wall structure, fluid dynamics, and plant operating conditions (mainly temperature and oxygen/carbon ratio all affect slagging behavior. Because coal has varying ash content and composition, different operating conditions are required to maintain the slag flow and limit problems downstream. In Part I, we review the main types and the operating conditions of entrained-flow gasifiers and coal properties used in IGCC plants; we identify and discuss the key coal ash properties and the operating conditions impacting slag behavior; finally, we summarize the coal quality criteria and the operating conditions in entrained-flow gasifiers. In Part II, we discuss the constitutive modeling related to the rheological studies of slag flow.

  10. Sulfur emission from Victorian brown coal under pyrolysis, oxy-fuel combustion and gasification conditions.

    Science.gov (United States)

    Chen, Luguang; Bhattacharya, Sankar

    2013-02-05

    Sulfur emission from a Victorian brown coal was quantitatively determined through controlled experiments in a continuously fed drop-tube furnace under three different atmospheres: pyrolysis, oxy-fuel combustion, and carbon dioxide gasification conditions. The species measured were H(2)S, SO(2), COS, CS(2), and more importantly SO(3). The temperature (873-1273 K) and gas environment effects on the sulfur species emission were investigated. The effect of residence time on the emission of those species was also assessed under oxy-fuel condition. The emission of the sulfur species depended on the reaction environment. H(2)S, SO(2), and CS(2) are the major species during pyrolysis, oxy-fuel, and gasification. Up to 10% of coal sulfur was found to be converted to SO(3) under oxy-fuel combustion, whereas SO(3) was undetectable during pyrolysis and gasification. The trend of the experimental results was qualitatively matched by thermodynamic predictions. The residence time had little effect on the release of those species. The release of sulfur oxides, in particular both SO(2) and SO(3), is considerably high during oxy-fuel combustion even though the sulfur content in Morwell coal is only 0.80%. Therefore, for Morwell coal utilization during oxy-fuel combustion, additional sulfur removal, or polishing systems will be required in order to avoid corrosion in the boiler and in the CO(2) separation units of the CO(2) capture systems.

  11. A Modified Gibbs Free Energy Minimisation Model for Fluid Bed Coal Gasification

    Directory of Open Access Journals (Sweden)

    Ściążko Marek

    2015-03-01

    Full Text Available A modified approach to equilibrium modelling of coal gasification is presented, based on global thermodynamic analysis of both homogeneous and heterogeneous reactions occurring during a gasification process conducted in a circulating fluid bed reactor. The model is based on large-scale experiments (ca. 200 kg/h with air used as a gasification agent and introduces empirical modifications governing the quasi-equilibrium state of two reactions: water-gas shift and Boudouard reaction. The model predicts the formation of the eight key gaseous species: CO, CO2, H2O, H2, H2S, N2, COS and CH4, volatile hydrocarbons represented by propane and benzene, tar represented by naphthalene, and char containing the five elements C, H, O, N, S and inorganic matter.

  12. Characterization of Filter Elements for Service in a Coal Gasification Environment

    Energy Technology Data Exchange (ETDEWEB)

    Spain, J.D.

    2002-09-19

    The Power Systems Development Facility (PSDF) is a joint Department of Energy/Industry sponsored engineering-scale facility for testing advanced coal-based power generation technologies. High temperature, high pressure gas cleaning is critical to many of these advanced technologies. Barrier filter elements that can operate continuously for nearly 9000 hours are required for a successful gas cleaning system for use in commercial power generation. Since late 1999, the Kellogg Brown & Root Transport reactor at the PSDF has been operated in gasification mode. This paper describes the test results for filter elements operating in the Siemens-Westinghouse particle collection device (PCD) with the Transport reactor in gasification mode. Operating conditions in the PCD have varied during gasification operation as described elsewhere in these proceedings (Martin et al, 2002).

  13. Geological and Rock Mechanics Perspectives for Underground Coal Gasification in India

    Science.gov (United States)

    Singh, Ajay K.; Singh, Rajendra

    2017-07-01

    The geological resources of coal in India are more than 308 billion tonnes upto a depth of 1200 m, out of which proved reserve has been reported at around 130 billion tonnes. There is an increasing requirement to increase the energy extraction efficiency from coal as the developmental prospects of India increase. Underground coal gasification (UCG) is a potential mechanism which may be utilized for extraction of deep-seated coal reserves. Some previous studies suggest that lignites from Gujarat and Rajasthan, along with tertiary coals from northeastern India can be useful from the point of view of UCG. We discuss some geological literature available for these areas. Coming to the rock mechanics perspectives, during UCG the rock temperature is considerable high. At this temperature, most empirical models of rock mechanics may not be applied. In this situation, the challenges for numerical modelling of UCG sites increases manifold. We discuss some of the important modelling geomechanical issues related to UCG in India.

  14. Clean and economical gasification of combined coal and biomass pelletized fuels by industries worldwide

    Energy Technology Data Exchange (ETDEWEB)

    Carlo Amorino; Alberto Pettinau; Rolf E. Maurer; Evan Hughes; Filippo Larceri; Francesco Repetto; Phil Wellhausen; Peter Lange [Sotacarbo S.p.A. (Italy)

    2007-07-01

    Industrial clean coal utilization is enhanced when gasifying low cost high ash coals combined with locally available biomass and/or biowaste from agricultural and/or industrial operations. The cost of the biowaste is near zero if there is a cost associated with the removal of the biowaste from the industrial site. The clean gas and liquids generated for industrial usage are in the range of 0.12 to 0.15 euro/nM{sup 3} displacing much costlier petroleum or gaseous fuels. Sotacarbo S.P.A. and Ansaldo Ricerche S.r.l. with collaboration of Hamilton Maurer International, Inc. (HMI) have designed, installed and commissioned an advanced single stage fixed-bed gasifier in Sotacarbo's R&D facility in April 2007. Clean coal utilization is enhanced when coal is combined with a biomass or biowaste feedstock. Ansaldo Ricerche and HMI, Inc. designed a single-stage fixed bed biomass gasifier, installed and successfully commissioned in 2001 at ARI's research facility in Genova, Italy. This presentation highlights the simplicity and high efficiency (82 to 87%) of the coal and coal/biomass gasification process. CPM both in the US and Europe has extensive experience with coal fuels preparation (pelletization). The economics and ability to combine coals with biomass to generate an economical and viable gasification fuel pellets are reviewed. This paper presents the ability to utilize coal cleanly with biomass (Bio-coal) to lower fuel costs while enhancing the availability and reliability of industrial energy and reducing CO{sub 2} emissions provides a quantum jump forward for both industries and the environment. 21 refs., 4 figs.

  15. Geology of the Hanna Formation, Hanna Underground Coal Gasification Site, Hanna, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    Oliver, R.L.; Youngberg, A.D.

    1984-01-01

    The Hanna Underground Coal Gasification (UCG) study area consists of the SW1/4 of Section 29 and the E1/2SE1/4 of Section 30 in Township 22 North, Range 81 West, Wyoming. Regionally, this is located in the coal-bearing Hanna Syncline of the Hanna Basin in southeast Wyoming. The structure of the site is characterized by beds dipping gently to the northeast. An east-west fault graben complex interrupts this basic trend in the center of the area. The target coal bed of the UCG experiments was the Hanna No. 1 coal in the Hanna Formation. Sedimentary rocks comprising the Hanna Formation consist of a sequence of nonmarine shales, sandstones, coals and conglomerates. The overburden of the Hanna No. 1 coal bed at the Hanna UCG site was divided into four broad local stratigraphic units. Analytical studies were made on overburden and coal samples taken from cores to determine their mineralogical composition. Textural and mineralogical characteristics of sandstones from local stratigraphic units A, B, and C were analyzed and compared. Petrographic analyses were done on the coal including oxides, forms of sulfur, pyrite types, maceral composition, and coal rank. Semi-quantitative spectrographic and analytic geochemical analyses were done on the overburden and coal and relative element concentrations were compared. Trends within each stratigraphic unit were also presented and related to depositional environments. The spectrographic analysis was also done by lithotype. 34 references, 60 figures, 18 tables.

  16. Encoal mild coal gasification project: Encoal project final report, July 1, 1997--July 31, 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-01

    This document is the summative report on the ENCOAL Mild Coal Gasification Project. It covers the time period from September 17, 1990, the approval date of the Cooperative Agreement between ENCOAL and the US Department of Energy (DOE), to July 17, 1997, the formal end of DOE participation in the Project. The Cooperative Agreement was the result of an application by ENCOAL to the DOE soliciting joint funding under Round III of the Clean Coal Technology Program. By June 1992, the ENCOAL Plant had been built, commissioned and started up, and in October 1994, ENCOAL was granted a two-year extension, carrying the project through to September 17, 1996. No-cost extensions have moved the Cooperative Agreement end date to July 17, 1997 to allow for completion of final reporting requirements. At its inception, ENCOAL was a subsidiary of Shell Mining Company. In November 1992, Shell Mining Company changed ownership, becoming a subsidiary of Zeigler Coal Holding Company (Zeigler) of Fairview Heights, Illinois. Renamed successively as SMC Mining Company and then Bluegrass Coal Development Company, it remained the parent entity for ENCOAL, which has operated a 1,000-ton/day mild coal gasification demonstration plant near Gillette, Wyoming for nearly 5 years. ENCOAL operates at the Buckskin Mine owned by Triton Coal Company (Triton), another Zeigler subsidiary.

  17. Coal waste slurries as a fuel for integrated gasification combined cycle plants

    Directory of Open Access Journals (Sweden)

    Lutynski Marcin A.

    2016-01-01

    Full Text Available The article summarizes recent development in integrated gasification combined cycle technology and lists existing and planned IGCC plants. A brief outlook on the IGCC gasification technology is given with focus on entrained-flow gasifiers where the low-quality coal waste slurry fuel can be used. Desired properties of coal and ash for entrained-flow gasifiers are listed. The coal waste slurries, which were deposited at impoundments in Upper Silesian Coal Basin, were considered as a direct feed for such gasifiers. The average ash content, moisture content and lower heating value were analysed and presented as an average values. Entrained-flow commercial gasifiers can be considered as suitable for the coal slurry feed, however the ash content of coal slurries deposited in impoundments is too high for the direct use as the feed for the gasifiers. The moisture content of slurries calculated on as received basis meets the requirements of entrained-flow slurry feed gasifiers. The content of fines is relatively high which allow to use the slurries in entrained-flow gasifiers.

  18. Chemical-Looping Combustion and Gasification of Coals and Oxygen Carrier Development: A Brief Review

    Directory of Open Access Journals (Sweden)

    Ping Wang

    2015-09-01

    Full Text Available Chemical-looping technology is one of the promising CO2 capture technologies. It generates a CO2 enriched flue gas, which will greatly benefit CO2 capture, utilization or sequestration. Both chemical-looping combustion (CLC and chemical-looping gasification (CLG have the potential to be used to generate power, chemicals, and liquid fuels. Chemical-looping is an oxygen transporting process using oxygen carriers. Recently, attention has focused on solid fuels such as coal. Coal chemical-looping reactions are more complicated than gaseous fuels due to coal properties (like mineral matter and the complex reaction pathways involving solid fuels. The mineral matter/ash and sulfur in coal may affect the activity of oxygen carriers. Oxygen carriers are the key issue in chemical-looping processes. Thermogravimetric analysis (TGA has been widely used for the development of oxygen carriers (e.g., oxide reactivity. Two proposed processes for the CLC of solid fuels are in-situ Gasification Chemical-Looping Combustion (iG-CLC and Chemical-Looping with Oxygen Uncoupling (CLOU. The objectives of this review are to discuss various chemical-looping processes with coal, summarize TGA applications in oxygen carrier development, and outline the major challenges associated with coal chemical-looping in iG-CLC and CLOU.

  19. Release of inorganic trace elements from high-temperature gasification of coal

    Energy Technology Data Exchange (ETDEWEB)

    Blaesing, Marc

    2012-05-30

    The development of cleaner, more efficient techniques in next-generation coal power plants is becoming increasingly important, especially regarding to the discussion of the influence of CO{sub 2} emissions on global warming. A promising coal utilisation process is the integrated gasification combined cycle process. The direct use of the raw gas requires gas clean-up to prevent downstream parts of the gasifier from several problems. An increased efficiency and a decreased amount of harmful species can be achieved through hot fuel gas cleaning. This clean-up technique requires a comprehensive knowledge of the release characteristics of inorganic coal constituents. The aim of this thesis was to provide enhanced knowledge of the effect of key process parameters and of the chemical constitution of coal on the release of Na, K, S, and Cl species from high-temperature coal gasification. The experimental setup consisted of atmospheric flow tube furnaces and a pressurised furnace. In-situ analysis of the product gas was carried out using molecular beam mass spectrometry. A broad spectrum of different coals with assumed qualitative and quantitative differences in the release characteristics was investigated. Additionally, experiments with model substances were performed. The results of the experimental investigation were compared with thermodynamic calculations. Finally, recommendations, for the operation of a high-temperature gasifier are formulated. (orig.)

  20. Method of oxygen-enriched two-stage underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Liu Hongtao; Chen Feng; Pan Xia; Yao Kai; Liu Shuqin

    2011-01-01

    Two-stage underground coal gasification was studied to improve the caloric value of the syngas and to extend gas production times. A model test using the oxygen-enriched two-stage coal gasification method was carried out. The composition of the gas produced, the time ratio of the two stages, and the role of the temperature field were analysed. The results show that oxygen-enriched two-stage gasification shortens the time of the first stage and prolongs the time of the second stage. Feed oxygen concentrations of 30%,35%, 40%, 45%, 60%, or 80% gave time ratios (first stage to second stage) of 1:0.12, 1:0.21, 1:0.51, 1:0.64,1:0.90, and 1:4.0 respectively. Cooling rates of the temperature field after steam injection decreased with time from about 19.1-27.4 ℃/min to 2.3-6.8 ℃/min. But this rate increased with increasing oxygen concentrations in the first stage. The caloric value of the syngas improves with increased oxygen concentration in the first stage. Injection of 80% oxygen-enriched air gave gas with the highest caloric value and also gave the longest production time. The caloric value of the gas obtained from the oxygenenriched two-stage gasification method lies in the range from 5.31 MJ/Nm3 to 10.54 MJ/Nm3.

  1. Taguchi approach for co-gasification optimization of torrefied biomass and coal.

    Science.gov (United States)

    Chen, Wei-Hsin; Chen, Chih-Jung; Hung, Chen-I

    2013-09-01

    This study employs the Taguchi method to approach the optimum co-gasification operation of torrefied biomass (eucalyptus) and coal in an entrained flow gasifier. The cold gas efficiency is adopted as the performance index of co-gasification. The influences of six parameters, namely, the biomass blending ratio, oxygen-to-fuel mass ratio (O/F ratio), biomass torrefaction temperature, gasification pressure, steam-to-fuel mass ratio (S/F ratio), and inlet temperature of the carrier gas, on the performance of co-gasification are considered. The analysis of the signal-to-noise ratio suggests that the O/F ratio is the most important factor in determining the performance and the appropriate O/F ratio is 0.7. The performance is also significantly affected by biomass along with torrefaction, where a torrefaction temperature of 300°C is sufficient to upgrade eucalyptus. According to the recommended operating conditions, the values of cold gas efficiency and carbon conversion at the optimum co-gasification are 80.99% and 94.51%, respectively.

  2. Kinetic of Catalytic CO{sub 2} Gasification for Cyprus Coal by Gas-Solid Reaction Model

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Soon Choel; Lee, Do Kyun; Kim, Sang Kyum; Rhee, Young Woo [Chungnam National University, Daejeon (Korea, Republic of); Lee, Si Hyun [Korea Institute of Energy Research, Daejeon (Korea, Republic of)

    2015-10-15

    In general, the coal gasification has to be operated under high temperature (1300~1400 .deg. C) and pressure (30~40 bar). However, to keep this conditions, it needs unnecessary and excessive energy. In this work, to reduce the temperature of process, alkali catalysts such as K{sub 2}CO{sub 3} and Na{sub 2}CO{sub 3} were added into Cyprus coal. We investigated the kinetic of Cyprus char-CO{sub 2} gasification. To determine the gasification conditions, the coal (with and without catalysts) gasified with fixed variables (catalyst loading, catalytic effects of Na{sub 2}CO{sub 3} and K{sub 2}CO{sub 3}, temperatures) by using TGA. When catalysts are added by physical mixing method into Cyprus coal the reaction rate of coal added 7 wt% Na{sub 2}CO{sub 3} is faster than raw coal for Cyprus char-CO{sub 2} gasification. The activation energy of coal added 7 wt% Na{sub 2}CO{sub 3} was calculated as 63 kJ/mol which was lower than raw char. It indicates that Na{sub 2}CO{sub 3} can improve the reactivity of char-CO{sub 2} gasification.

  3. Analysis of a Coal Fired Combined Cycle with Carried—Heat Gasification

    Institute of Scientific and Technical Information of China (English)

    XuXiangdong; F.N.Fett; 等

    1994-01-01

    In the research of a more effcient,less costly,more environmentally responsible and less technically difficult method for generating electrical power from coal.the Carried-heat Gasification combined Cycle (CGCC) is introduced by Tsinghua University.The high efficiency cycle includes carried-heat partial gasification,compressed air heating in a fluidized bed immersed air heater followed by a combustor and the heat recovery of gas turbine exhaust used as the combustion air for the differential-velocity atmospheric circulating fluidized bed(DFBC),Superheat steam is raised in the DFBC boiler,The comparison of results identifies the causes of performance difference between eight cases,Features of the cycle ensure a high coal conversion efficiency within current state of the art.

  4. Effect of powdered activated carbon technology on short-cut nitrogen removal for coal gasification wastewater.

    Science.gov (United States)

    Zhao, Qian; Han, Hongjun; Xu, Chunyan; Zhuang, Haifeng; Fang, Fang; Zhang, Linghan

    2013-08-01

    A combined process consisting of a powdered activated carbon technology (PACT) and short-cut biological nitrogen removal reactor (SBNR) was developed to enhance the removal efficiency of the total nitrogen (TN) from the effluent of an upflow anaerobic sludge bed (UASB) reactor, which was used to treat coal gasification wastewater (CGW). The SBNR performance was improved with the increasing of COD and TP removal efficiency via PACT. The average removal efficiencies of COD and TP in PACT were respectively 85.80% and 90.30%. Meanwhile, the NH3-N to NO2-N conversion rate was achieved 86.89% in SBNR and the total nitrogen (TN) removal efficiency was 75.54%. In contrast, the AOB in SBNR was significantly inhibited without PACT or with poor performance of PACT in advance, which rendered the removal of TN. Furthermore, PAC was demonstrated to remove some refractory compounds, which therefore improved the biodegradability of the coal gasification wastewater.

  5. Three Stage Equilibrium Model for Coal Gasification in Entrained Flow Gasifiers Based on Aspen Plus

    Institute of Scientific and Technical Information of China (English)

    KONG Xiangdong; ZHONG Weimin; DU Wenli; QIAN Feng

    2013-01-01

    A three stage equilibrium model is developed for coal gasification in the Texaco type coal gasifiers based on Aspen Plus to calculate the composition of product gas,carbon conversion,and gasification temperature.The model is divided into three stages including pyrolysis and combustion stage,char gas reaction stage,and gas phase reaction stage.Part of the water produced in the pyrolysis and combustion stage is assumed to be involved in the second stage to react with the unburned carbon.Carbon conversion is then estimated in the second stage by steam participation ratio expressed as a function of temperature.And the gas product compositions are calculated from gas phase reactions in the third stage.The simulation results are consistent with published experimental data.

  6. Combustion of producer gas from gasification of south Sumatera lignite coal using CFD simulation

    Directory of Open Access Journals (Sweden)

    Vidian Fajri

    2017-01-01

    Full Text Available The production of gasses from lignite coal gasification is one of alternative fuel for the boiler or gas turbine. The prediction of temperature distribution inside the burner is important for the application and optimization of the producer gas. This research aims to provide the information about the influence of excess air on the temperature distribution and combustion product in the non-premixed burner. The process was carried out using producer gas from lignite coal gasification of BA 59 was produced by the updraft gasifier which is located on Energy Conversion Laboratory Mechanical Engineering Department Universitas Sriwijaya. The excess air used in the combustion process were respectively 10%, 30% and 50%. CFD Simulations was performed in this work using two-dimensional model of the burner. The result of the simulation showed an increase of excess air, a reduction in the gas burner temperature and the composition of gas (carbon dioxide, nitric oxide and water vapor.

  7. 煤质变化对Shell粉煤气化工艺的影响%THE EFFECT OF COAL QUALITY CHANGE ON SHELL PULVERIZED-COAL GASIFICATION PROCESS

    Institute of Scientific and Technical Information of China (English)

    吴国祥

    2011-01-01

    The Shell pulverized-coal gasification process is introduced,the specific requirement for coal quality by Shell pulverized-coal gasification process summarized,several factors related to coal quality and the effect of the changes of these factors on Shell pulverized-coal gasification plant highlighted and the preventive measures based on the effects concluded.%介绍Shell粉煤气化工艺流程,总结Shell粉煤气化工艺对煤质的具体要求,阐述与煤质相关的几方面因素及这些因素的变化对Shell粉煤气化装置的影响,并根据这些影响得出相应的预防措施。

  8. A Study on the Applicability of Kinetic Models for Shenfu Coal Char Gasification with CO2 at Elevated Temperatures

    Directory of Open Access Journals (Sweden)

    Jinsheng Gao

    2009-07-01

    Full Text Available In this paper, measurements of the CO2 gasification kinetics for two types of Shenfu coal chars, which were respectively prepared by slow and rapid pyrolysis at temperatures of 950 °C and 1,400 °C, were performed by an isothermal thermo-gravimetric analysis under ambient pressure and elevated temperature conditions. Simultaneously, the applicability of the kinetic model for the CO2 gasification reaction of Shenfu coal chars was discussed. The results showed: (i the shrinking un-reacted core model was not appropriate to describe the gasification reaction process of Shenfu coal chars with CO2 in the whole experimental temperature range; (ii at the relatively low temperatures, the modified volumetric model was as good as the random pore model to simulate the CO2 gasification reaction of Shenfu coal chars, while at the elevated temperatures, the modified volumetric model was superior to the random pore model for this process; (iii the integral expression of the modified volumetric model was more favorable than the differential expression of that for fitting the experimental data. Moreover, by simply introducing a function: A = A★exp(ft, it was found that the extensive model of the modified volumetric model could make much better predictions than the modified volumetric model. It was recommended as a convenient empirical model for comprehensive simulation of Shenfu coal char gasification with under conditions close to those of entrained flow gasification.

  9. Development and demonstration plant operation of an opposed multi-burner coal-water slurry gasification technology

    Institute of Scientific and Technical Information of China (English)

    WANG Fuchen; ZHOU Zhijie; DAI Zhenhua; GONG Xin; YU Guangsuo; LIU Haifeng; WANG Yifei; YU Zunhong

    2007-01-01

    The features of the opposed multi-burner (OMB) gasification technology,the method and process of the research,and the operation results of a pilot plant and demon stration plants have been introduced.The operation results of the demonstration plants show that when Beisu coal was used as feedstock,the OMB CWS gasification process at Yankuang Cathy Coal Co.Ltd had a higher carbon conversion of 3%,a lower specific oxygen consumption of about 8%,and a lower specific carbon consumption of 2%-3% than that of Texaco CWS gasification at the Lunan Fertilizer Plant.When Shenfu coal was used as feedstock,the OMB CWS gasification process at Hua-lu Heng-sheng Chemical Co.Ltd had a higher carbon conversion of more than 3%,a lower specific oxygen consumption of about 2%,and a lower specific coal consumption of about 8% than that of the Texaco CWS gasification process at Shanghai Coking & Chemical Corporation.The OMB CWS gasification technology is proven by industrial experience to have a high product yield,low oxygen and coal consumption and robust and safe operation.

  10. Final Report: Technoeconomic Evaluation of UndergroundCoal Gasification (UCG) for Power Generationand Synthetic Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    McVey, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2011-06-15

    This report concerns the technoeconomics of using Underground Coal Gasification (UCG) for power generation and for production of synthetic natural gas. Lawrence Livermore National Laboratory was retained under the Work for Others Agreement L-13208 for ExxonMobil Upstream Research Laboratoryi to investigate the economics of using UCG for feedstock supply for these two scenarios. The scope included conceptual designs, mass balances, and capital & operating cost estimates.

  11. The Lurgi coal gasification process. El proceso Lurgi de gasificacion del carbon

    Energy Technology Data Exchange (ETDEWEB)

    Herbert, P.; Vierrath, H. (Lurgi-GMBH (Germany))

    1990-02-01

    Priority requirements for the processes developed by Lurgi are reliability, ease of operation and a high efficiency design. It is only by attaining the first two objectives that high efficiency can be achieved. All plant needs to be designed to burn different types of coal with sometimes widely varying characteristics. A further prerequisite for achieving high output and for high capacity plant (minimum number of gasifiers, minimum investment operating and maintenance costs) is high pressure gasification. 10 refs., 11 figs., 2 tabs.

  12. Coal gasification systems engineering and analysis. Appendix H: Work breakdown structure

    Science.gov (United States)

    1980-01-01

    A work breakdown structure (WBS) is presented which encompasses the multiple facets (hardware, software, services, and other tasks) of the coal gasification program. The WBS is shown to provide the basis for the following: management and control; cost estimating; budgeting and reporting; scheduling activities; organizational structuring; specification tree generation; weight allocation and control; procurement and contracting activities; and serves as a tool for program evaluation.

  13. Epidemiological data base for a health effects study at a coal gasification plant

    OpenAIRE

    Morris, S C; Ukmata, H.; Begraca, M.; Canhasi, B.; Haxhiu, M.A.

    1988-01-01

    An occupational population is characterized as a basis for epidemiological study. Parameters include age, smoking history, years of work, job title, all medical diagnoses by 3-digit ICD code, and selected Iaboratory test results. By example analyses differences are examined in the incidence of chrome bronchitis and circulatory system disease by smoking history and job title. The data base includes coal gasification plant workers and surface lignite minors in Kosovo, Yugoslavia. Because of the...

  14. Fluidised bed gasification of low grade South African coals

    CSIR Research Space (South Africa)

    North, BC

    2006-09-01

    Full Text Available technologies, it is a fact that South Africa will continue to exploit its abundant coal reserves. The challenge, therefore, is to utilise the coal as efficiently as possible, in order to reduce carbon dioxide emissions. This paper describes an on...

  15. Reserch process geomigration during underground gasification and coal combustion

    Directory of Open Access Journals (Sweden)

    Zholudyev S.V.

    2014-12-01

    Full Text Available The chemical composition of subsoil water in the over- and subcoal deposits during underground combustion of brown coal can vary under coals thermal development product and pollution. Analysis of the substances-contaminants migratory in water is one of the main issues of further implementation of technologies UCG and UCC.

  16. Nitrogen mineralization from sludge in an alkaline, saline coal gasification ash environment.

    Science.gov (United States)

    Mbakwe, Ikenna; De Jager, Pieter C; Annandale, John G; Matema, Taurai

    2013-01-01

    Rehabilitating coal gasification ash dumps by amendment with waste-activated sludge has been shown to improve the physical and chemical properties of ash and to facilitate the establishment of vegetation. However, mineralization of organic N from sludge in such an alkaline and saline medium and the effect that ash weathering has on the process are poorly understood and need to be ascertained to make decisions regarding the suitability of this rehabilitation option. This study investigated the rate and pattern of N mineralization from sludge in a coal gasification ash medium to determine the prevalent inorganic N form in the system and assess the effect of ash weathering on N mineralization. An incubation experiment was performed in which fresh ash, weathered ash, and soil were amended with the equivalent of 90 Mg ha sludge, and N mineralization was evaluated over 63 d. More N (24%) was mineralized in fresh ash than in weathered ash and soil, both of which mineralized 15% of the initial organic N in sludge. More nitrification occurred in soil, and most of the N mineralized in ash was in the form of ammonium, indicating an inhibition of nitrifying organisms in the ash medium and suggesting that, at least initially, plants used for rehabilitation of coal gasification ash dumps will take up N mostly as ammonium.

  17. Thermodynamic Analysis of Blast Furnace Slag Waste Heat-Recovery System Integrated with Coal Gasification

    Science.gov (United States)

    Duan, W. J.; Li, P.; Lei, W.; Chen, W.; Yu, Q. B.; Wang, K.; Qin, Q.

    2015-05-01

    The blast furnace (BF) slag waste heat was recovered by an integrated system stage by stage, which combined a physical and chemical method. The water and coal gasification reactions were used to recover the heat in the system. Based on the first and second law of thermodynamics, the thermodynamic analysis of the system was carried out by the enthalpy-exergy diagram. The results showed that the concept of the "recovery-temperature countercurrent, energy cascade utilization" was realized by this system to recover and use the high-quality BF slag waste heat. In this system, the high-temperature waste heat was recovered by coal gasification and the relatively low-temperature waste heat was used to produce steam. The system's exergy and thermal recycling efficiency were 52.6% and 75.4%, respectively. The exergy loss of the integrated system was only 620.0 MJ/tslag. Compared with the traditional physical recycling method producing steam, the exergy and thermal efficiencies of the integrated system were improved significantly. Meanwhile, approximately 182.0 m3/tslag syngas was produced by coal gasification. The BF slag waste heat will be used integrally and efficiently by the integrated system. The results provide the theoretical reference for recycling and using the BF slag waste heat.

  18. U-GAS coal gasification process with in-situ desulfurization

    Energy Technology Data Exchange (ETDEWEB)

    Rehmat, A.; Abbasian, J.; Lau, F.

    1990-01-01

    Calcium based sorbents such as limestone and dolomite have been used in conjunction with the U-GAS coal gasification process for in-situ capture of sulfur present in the coal. Under the reducing conditions of the gasifier, these sorbents react with sulfur compounds to form calcium sulfide. As a unique feature of the U-GAS process, the calcium sulfide could be further reacted with air in the ash discharge zone to form calcium sulfate, which is environmentally acceptable for disposal directly from the gasifier along with the agglomerated ash. The Institute of Gas Technology (IGT) has conducted considerable testing in this area under different programs. The suitability of dolomite as in-situ sulfur capturing agent has been verified in U-GAS process using high-sulfur Pittsburgh coal. The gasification tests were conducted at 1850{degree}F in pressure ranges of 100 to 450 psig. The kinetics of the reaction between calcium based sorbents and hydrogen sulfide at these gasification conditions have been derived separately using a thermogravimetric technique. Effect of temperature, pressure, and particle size on the reaction rate were also included in these latter tests. Furthermore, the operating conditions and the type of sorbents suitable for achieving maximum calcium conversion to calcium sulfate during the oxidation step of the process have also been identified. 9 refs., 8 figs., 10 tabs.

  19. Subtask 3.16 - Low-Cost Coal-Water Fuel for Entrained-Flow Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, C.M.

    1997-10-01

    The specific objective of this research project is to assess the potential process efficiency and pollution control benefits that may occur by applying the hydrothermal, or hot water-drying, process to low-rank coals as related to entrained-flow gasification systems. Project emphasis is on identifying more efficient coal dewatering and CWF formulation methods prior to gasification. A favorable estimate of incremental cost for integrated hydrothermal drying depends, in part, on increasing the particle size of the feed coal from minus 100 to minus 28 mesh for the purpose of simplifying the slurry concentration process. Two options will be reviewed for dewatering or concentrating the processed slurry: (1) repressurization and then concentration with sieve bends or (2) partial dewatering at system pressure with hydroclones. Both have their own merits, sieve bends being a low-cost alternative, while hydroclone application would not require additional pumping sections prior to gasification. Various CWF samples with different particle-size distributions and solids concentrations will be sent to equipment vendors for application review. Also, EERC cost models will be used to calculate the integral cost of adding the partial dewatering to the hydrothermal technology for a commercial-size facility.

  20. Advances in the development of wire mesh reactor for coal gasification studies.

    Science.gov (United States)

    Zeng, Cai; Chen, Lei; Liu, Gang; Li, Wenhua; Huang, Baoming; Zhu, Hongdong; Zhang, Bing; Zamansky, Vladimir

    2008-08-01

    In an effort to further understand the coal gasification behavior in entrained-flow gasifiers, a high pressure and high temperature wire mesh reactor with new features was recently built. An advanced LABVIEW-based temperature measurement and control system were adapted. Molybdenum wire mesh with aperture smaller than 70 mum and type D thermocouple were used to enable high carbon conversion (>90%) at temperatures >1000 degrees C. Gaseous species from wire mesh reactor were quantified using a high sensitivity gas chromatography. The material balance of coal pyrolysis in wire mesh reactor was demonstrated for the first time by improving the volatile's quantification techniques.

  1. Application Of Relevance Maps Method To Evaluate The Suitability Of Coal Samples For Fluidal Gasification Process

    Directory of Open Access Journals (Sweden)

    Jamroz Dariusz

    2016-01-01

    The methods being used to visualization of multidimensional data through transformation of multidimensional space into two-dimensional space allow to present multidimensional data on computer screen. Among such methods, relevance maps method can be found which was used in this paper to present and analyze set of seven-dimensional data describing coal samples originating from both mines. It was decided to check whether this method of visualization of multidimensional data allows to divide the samples space into subspaces of various usefulness to the process of fluidal gasification or not. The method enables the visualisation of the optimal subspace containing the set requirements concerning the properties of coals intended for this process.

  2. Electric power and desalinated water co-production from Sulcis coal gasification project - Sardinia, Italy

    Energy Technology Data Exchange (ETDEWEB)

    Manca, E.; Utzeri, B.; Figus, M. (IST Engineers and Contractors, Cagliari (Italy))

    1991-01-01

    Because of environmental constraints, coal gasification is the only process which can be used to process Sulcis coal. Pilot plant IGCC tests have shown that high carbon conversion rates are possible, minimum emissions are achievable, and chemically and physically inert slag can be produced. Studies have also been undertaken of a co-production plant with the capability of recovering the discharged thermal energy into water cooling condensers feeding a desalination plant for production of industrial water from sea water. 1 fig., 4 tabs.

  3. Industrial-scale Fixed-bed Coal Gasification:Modeling, Simulation and Thermodynamic Analysis

    Institute of Scientific and Technical Information of China (English)

    何畅; 冯霄; 李安学; 刘永健

    2014-01-01

    We have developed a process model to simulate the behavior of an industrial-scale pressurized Lurgi fixed-bed coal gasifier using Aspen Plus and General Algebraic Modeling System (GAMS). Reaction characteristics in the fixed-bed gasifier comprising four sequential reaction zones-drying, pyrolysis, combustion and gasification are respectively modeled. A non-linear programming (NLP) model is developed for the pyrolysis zone to estimate the products composition which includes char, coal gases and distillable liquids. A four-stage model with restricted equilibrium temperature is used to study the thermodynamic equilibrium characteristics and calculate the composi-tion of syngas in the combustion and gasification zones. The thermodynamic analysis shows that the exergetic effi-ciency of the fixed-bed gasifier is mainly determined by the oxygen/coal ratio. The exergetic efficiency of the proc-ess will reach an optimum value of 78.3%when the oxygen/coal and steam/coal mass ratios are 0.14 and 0.80, re-spectively.

  4. Gasification trends

    Energy Technology Data Exchange (ETDEWEB)

    Simbeck, D.R.; Dickenson, R.L.; Karp, A.D. [SFA Pacific, Inc., Mountain View, CA (United States)

    1997-05-01

    The traditional use of gasification for high value chemicals will continue where fuel prices make gasification more competitive than steam methane reforming. However, oil companies already have the essentials--expertise, fuels, and financing--to be a dominant force in the new world of competitive energy markets. Refinery-based gasification therefore can be expected to proliferate as deregulation of electric power generation promotes the efficiency and economic advantages of cogeneration and trigeneration. The greatest market potential for gasification in the future is electric power generation. In traditional electric utility applications, the efficiency and overall economics of coal gasification may be only marginally superior to those of well-designed, coal-fired steam cycles having state-of-the-art emission controls. Offsetting gasification`s environmental and efficiency advantages in such applications are concerns about capital cost and the need for chemical process expertise. However, power industry deregulation and competition are likely to diminish the importance of large, new central power plants, while imparting increased value to gasification`s strategic advantages, which include: Gasification`s superior environmental performance, particularly in the area of solid wastes; gasification`s superior ability to exploit high-efficiency combustion turbine-based opportunities for combined-cycle and especially cogeneration applications; gasification`s superior ability to exploit a range of fuels--from natural gas and opportunity fuels in the near-to-intermediate term to coal in the longer term, when natural gas prices escalate; and gasification`s superior market economics and flexibility to create and profit from combined power and synthesis gas chemical applications.

  5. Development of biological coal gasification (MicGAS) process

    Energy Technology Data Exchange (ETDEWEB)

    Walia, D.S.; Srivastava, K.C.; Barik, S.

    1992-11-01

    Biomethanation of coal is a phenomenon carried out in concert by a mixed population (consortium) of at least three different groups of anaerobic bacteria and can be considered analogous to that of anaerobic digestion of municipal waste. The exception, however, is that unlike municipal waste; coal is a much complex and difficult substrate to degrade. This project was focused on studying the types of microorganisms involved in coal degradation, rates of methane production, developing a cost-effective synthetic culture medium for these microbial consortia and determining the rate of methane production in bench scale bioreactors.

  6. Development of biological coal gasification (MicGAS) process

    Energy Technology Data Exchange (ETDEWEB)

    Walia, D.S.; Srivastava, K.C.; Barik, S.

    1992-01-01

    Biomethanation of coal is a phenomenon carried out in concert by a mixed population (consortium) of at least three different groups of anaerobic bacteria and can be considered analogous to that of anaerobic digestion of municipal waste. The exception, however, is that unlike municipal waste; coal is a much complex and difficult substrate to degrade. This project was focused on studying the types of microorganisms involved in coal degradation, rates of methane production, developing a cost-effective synthetic culture medium for these microbial consortia and determining the rate of methane production in bench scale bioreactors.

  7. Measurements of Gasification Characteristics of Coal and Char in CO2-Rich Gas Flow by TG-DTA

    Directory of Open Access Journals (Sweden)

    Zhigang Li

    2013-01-01

    Full Text Available Pyrolysis, combustion, and gasification properties of pulverized coal and char in CO2-rich gas flow were investigated by using gravimetric-differential thermal analysis (TG-DTA with changing O2%, heating temperature gradient, and flow rate of CO2-rich gases provided. Together with TG-DTA, flue gas generated from the heated coal, such as CO, CO2, and hydrocarbons (HCs, was analyzed simultaneously on the heating process. The optimum O2% in CO2-rich gas for combustion and gasification of coal or char was discussed by analyzing flue gas with changing O2 from 0 to 5%. The experimental results indicate that O2% has an especially large effect on carbon oxidation at temperature less than 1100°C, and lower O2 concentration promotes gasification reaction by producing CO gas over 1100°C in temperature. The TG-DTA results with gas analyses have presented basic reference data that show the effects of O2 concentration and heating rate on coal physical and chemical behaviors for the expected technologies on coal gasification in CO2-rich gas and oxygen combustion and underground coal gasification.

  8. Metal-oxide-catalyzed CO{sub 2} gasification of coal using a solar furnace simulator

    Energy Technology Data Exchange (ETDEWEB)

    Kodama, T.; Funatoh, A.; Shimizu, T.; Kitayama, Y. [Niigata University, Niigata (Japan). Department of Chemistry & Chemical Engineering, Faculty of Engineering

    2000-12-01

    Metal-oxide-catalyzed CO{sub 2} gasification of coal was demonstrated in small packed-bed and fluidized-bed reactors using a solar furnace simulator, for the purpose of converting solar high-temperature heat to chemical fuels. The catalytic activities of In{sub 2}O{sub 3} and ZnO were investigated because used In{sub 2}O{sub 3} or ZnO catalyst may be separated from remaining coal ash by In{sub 2}O{sub 3} and Zn evaporation at high temperatures and at a reducing atmosphere. Bituminous coal with or without the metal-oxide catalyst in the quartz-tube reactor was directly irradiated by the concentrated Xe-lamp beam and CO{sub 2} was fed to the reactor at pCO{sub 2} = 1.0. In the packed-bed reactor, In{sub 2}O{sub 3} and ZnO much improved the chemical coal conversion by about 4-5 and 2-3 times at the catalyst loading of 17 wt%-In and 30 wt %-Zn in the coal-metal-oxide mixture, respectively, at temperatures around 1000-1400 K. In the fluidized-bed reactor at a small catalyst loading (8-10 wt%-metal in the coal-metal-oxide mixture) and at 1073-1163 K, In{sub 2}O{sub 3} catalytically increased the coal-conversion rate by 3 times but ZnO scarcely showed the catalytic activity. This metal-catalyzed coal gasification process offers the efficient solar production of the syngas calorifically upgraded by solar energy. 24 refs., 11 figs., 3 tabs.

  9. Control of combustion area using electrical resistivity method for underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Selivanova Tatiana; Grebenyuk Igor; Belov Alexey

    2012-01-01

    Underground coal gasification (UCG) is one of the clean technologies to collect heat energy and gases (hydrogen,methane,etc.) in an underground coal seam.It is necessary to further developing environmentally friendly UCG system construction.One of the most important UCG's problems is underground control of combustion area for efficient gas production,estimation of subsidence and gas leakage to the surface.For this objective,laboratory experiments were conducted according to the UCG model to identify the process of combustion cavity development by monitoring the electrical resistivity activity on the coal samples to setup fundamental data for the technology engineering to evaluate combustion area.While burning coal specimens,that had been sampled from various coal deposits,electrical resistivity was monitored.Symmetric four electrodes system (ABMN) of direct and low-frequency current electric resistance method was used.for laboratory resistivity measurement of rock samples.Made research and the results suggest that front-end of electro conductivity activity during heating and combusting of coal specimen depended on heating temperature.Combusting coal electro conductivity has complicated multistage type of change.Electrical resistivity method is expected to be a useful geophysical tool to for evaluation of combustion volume and its migration in the coal seam.

  10. Coal gasification power generation, and product market study. Topical report, March 1, 1995--March 31, 1996

    Energy Technology Data Exchange (ETDEWEB)

    Sheesley, D.; King, S.B.

    1998-12-31

    This Western Research Institute (WRI) project was part of a WRI Energy Resource Utilization Program to stimulate pilot-scale improved technologies projects to add value to coal resources in the Rocky Mountain region. The intent of this program is to assess the application potential of emerging technologies to western resources. The focus of this project is on a coal resource near the Wyoming/Colorado border, in Colorado. Energy Fuels Corporation/Kerr Coal Company operates a coal mine in Jackson County, Colorado. The coal produces 10,500 Btu/lb and has very low sulfur and ash contents. Kerr Coal Company is seeking advanced technology for alternate uses for this coal. This project was to have included a significant cost-share from the Kerr Coal Company ownership for a market survey of potential products and technical alternatives to be studied in the Rocky Mountain Region. The Energy Fuels Corporation/Kerr Coal Company and WRI originally proposed this work on a cost reimbursable basis. The total cost of the project was priced at $117,035. The Kerr Coal Company had scheduled at least $60,000.00 to be spent on market research for the project that never developed because of product market changes for the company. WRI and Kerr explored potential markets and new technologies for this resource. The first phase of this project as a preliminary study had studied fuel and nonfuel technical alternatives. Through related projects conducted at WRI, resource utilization was studied to find high-value materials that can be targeted for fuel and nonfuel use and eventually include other low-sulfur coals in the Rocky Mountain region. The six-month project work was spread over about a three-year period to observe, measure, and confirm over time-any trends in technology development that would lead to economic benefits in northern Colorado and southern Wyoming from coal gasification and power generation.

  11. Effect of CO2 gasification reaction on oxycombustion of pulverized coal char.

    Energy Technology Data Exchange (ETDEWEB)

    Molina, Alejandro (Universidad Nacional de Colombia, Medellin, Colombia); Hecht, Ethan S.; Shaddix, Christopher R.; Haynes, Brian S. (University of Sydney, New South Wales, Australia)

    2010-07-01

    For oxy-combustion with flue gas recirculation, as is commonly employed, it is recognized that elevated CO{sub 2} levels affect radiant transport, the heat capacity of the gas, and other gas transport properties. A topic of widespread speculation has concerned the effect of the CO{sub 2} gasification reaction with coal char on the char burning rate. To give clarity to the likely impact of this reaction on the oxy-fuel combustion of pulverized coal char, the Surface Kinetics in Porous Particles (SKIPPY) code was employed for a range of potential CO{sub 2} reaction rates for a high-volatile bituminous coal char particle (130 {micro}m diameter) reacting in several O{sub 2} concentration environments. The effects of boundary layer chemistry are also examined in this analysis. Under oxygen-enriched conditions, boundary layer reactions (converting CO to CO{sub 2}, with concomitant heat release) are shown to increase the char particle temperature and burning rate, while decreasing the O{sub 2} concentration at the particle surface. The CO{sub 2} gasification reaction acts to reduce the char particle temperature (because of the reaction endothermicity) and thereby reduces the rate of char oxidation. Interestingly, the presence of the CO{sub 2} gasification reaction increases the char conversion rate for combustion at low O{sub 2} concentrations, but decreases char conversion for combustion at high O{sub 2} concentrations. These calculations give new insight into the complexity of the effects from the CO{sub 2} gasification reaction and should help improve the understanding of experimentally measured oxy-fuel char combustion and burnout trends in the literature.

  12. Synergetic and inhibition effects in carbon dioxide gasification of blends of coals and biomass fuels of Indian origin.

    Science.gov (United States)

    Satyam Naidu, V; Aghalayam, P; Jayanti, S

    2016-06-01

    The present study investigates the enhancement of CO2 gasification reactivity of coals due to the presence of catalytic elements in biomass such as K2O, CaO, Na2O and MgO. Co-gasification of three Indian coal chars with two biomass chars has been studied using isothermal thermogravimetric analysis (TGA) in CO2 environment at 900, 1000 and 1100°C. The conversion profiles have been used to establish synergetic or inhibitory effect on coal char reactivity by the presence of catalytic elements in biomass char by comparing the 90% conversion time with and without biomass. It is concluded that both biomasses exhibit synergistic behavior when blended with the three coals with casuarina being more synergetic than empty fruit bunch. Some inhibitory effect has been noted for the high ash coal at the highest temperature with higher 90% conversion time for the blend over pure coal, presumably due to diffusional control of the conversion rate.

  13. Thermodynamic analysis of the gasification of coal water slurry fuels for a circulating fluidized bed gasifier

    Energy Technology Data Exchange (ETDEWEB)

    Tsui, H.; Yavuzkurt, S.; Scaroni, A. [National Taiwan University, Taipei (Taiwan)

    2002-07-01

    To validate the concept of coal gasification in the integrated coal gasification combined cycle (IGCC), a novel laboratory gasifier consisting of a circulating fluidized bed and a cyclone combustor has been constructed. This paper reports a thermodynamic analysis conducted to predict the maximum capacity and the condition for best operation of this circulating fluidized bed gasifier, which has an inside diameter of 0.3048 m and a height of 2.5 m. The equilibrium feed rates of materials and the quality of the product gas are described as a function of the reactor temperature, the thermal capacity of the gasifier, and the water concentration in coal water slurry fuel. The results of parametric analysis show that the thermal efficiency decreases, but the efficiency of desulfurization increases as the reactor temperature increases. The thermal capacity of the gasifier has no influence on the quality of the product gas. The thermal efficiency and the efficiency of desulfurization decrease as the water concentration in the coal water slurry increases. The desulfurization in the gasifier at equilibrium conditions is very efficient and meets the EPA regulations of the USA.

  14. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Jordi Perez-Mariano; Angel Sanjurjo

    2006-12-31

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this period, we analyzed several coated and exposed samples of 409 steel by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX), and report on the findings of four samples: (1) Analysis of two porous coupons after exposure to the porous metal particulate filter of the coal gasification power plant at 370 C for 2140 hours revealed that corrosion takes place in the bulk of the sample while the most external zone surface survived the test. (2) Coating and characterization of several porous 409 steel coupons after being coated with nitrides of Ti, Al and/or Si showed that adjusting experimental conditions results in thicker coatings in the bulk of the sample. (3) Analysis of coupons exposed to simulated coal gas at 370 C for 300 hours showed that a better corrosion resistance is achieved by improving the coatings in the bulk of the samples.

  15. Coal gasification in steam and air medium under plasma conditions. A preliminary study

    Energy Technology Data Exchange (ETDEWEB)

    Qiu, Jieshan; He, Xiaojun; Sun, Tianjun; Zhao, Zongbin; Zhou, Ying [Carbon Research Laboratory, Department of Materials Science and Chemical Engineering, Dalian University of Technology, 158 Zhongshan Road, P.O. Box 49, Dalian 116012 (China); Guo, Shuhong; Zhang, Jialiang; Ma, Tengcai [State Key Laboratory for Materials Modification by Laser, Ion and Electron Beams, Dalian University of Technology, Dalian 116024 (China)

    2004-07-15

    The gasification of coal under steam and air plasma conditions at atmospheric pressure was investigated in a tube-type setup with an aim of producing synthesis gas. The plasma was diagnosed by optical emission spectroscopy (OES) and the synthesis gas was analyzed by gas chromatography (GC). It has been found that the content of H{sub 2} and CO in gas increases with increasing the arc input power, and passes through a maximum with the increase of current in electromagnetic coil. This is also the case for the variation trend of CO content in gas with the increase of the feeding rate of coal, but the H{sub 2} content in gas decreases as the feeding rate of coal increases. Under the experimental conditions tested, the content of H{sub 2}+CO in the gas could reach 75% in volume with CO{sub 2} being less than 3.0 vol.%. The OES diagnosis reveals that CO{sup +} ion and CH radical are present in the plasma and the variation trend of their intensities is, to some degree, in accordance with the variation trend of CO content in the gas, indicating that the CO{sup +} ion and CH radical are the precursors or origins of CO species in the gas. The preliminary results presented here demonstrate that the gasification of coal under steam and air plasma conditions might become a new approach for production of synthesis gas.

  16. Hanna, Wyoming underground coal gasification data base. Volume 3. The Hanna II, Phase I field test

    Energy Technology Data Exchange (ETDEWEB)

    Bartke, T.C.; Fischer, D.D.; King, S.B.; Boyd, R.M.; Humphrey, A.E.

    1985-08-01

    This report is part of a seven-volume series on the Hanna, Wyoming, underground coal gasification field tests. Volume 1 is a summary of the project, and each of Volumes 2 through 6 describes a particular test. Volume 7 is a compilation of all the data for the tests in Volumes 2 through 6. Hanna II, Phase I was conducted during the spring and summer of 1975, at a site about 700 feet up dip (to the southwest) of the Hanna I test. The test was conducted in two stages - Phase IA and IB. Phase IA consisted of linking and gasification operations between Wells 1 and 3 and Phase IB of linking from the 1-3 gasification zone to Well 2, followed by a short period of gasification from Well 2 to Well 3 over a broad range of air injection rates, in order to determine system turndown capabilities and response times. This report covers: (1) site selection and characteristics; (2) test objectives; (3) facilities description; (4) pre-operational testing; (5) test operations summary; and (6) post-test activity. 7 refs., 11 figs., 8 tabs.

  17. Coal gasification by indirect heating in a single moving bed reactor: Process development & simulation

    Directory of Open Access Journals (Sweden)

    Junaid Akhlas

    2015-10-01

    Full Text Available In this work, the development and simulation of a new coal gasification process with indirect heat supply is performed. In this way, the need of pure oxygen production as in a conventional gasification process is avoided. The feasibility and energetic self-sufficiency of the proposed processes are addressed. To avoid the need of Air Separation Unit, the heat required by gasification reactions is supplied by the combustion flue gases, and transferred to the reacting mixture through a bayonet heat exchanger installed inside the gasifier. Two alternatives for the flue gas generation have been investigated and compared. The proposed processes are modeled using chemical kinetics validated on experimental gasification data by means of a standard process simulator (Aspen PlusTM, integrated with a spreadsheet for the modeling of a special type of heat exchanger. Simulation results are presented and discussed for proposed integrated process schemes. It is shown that they do not need external energy supply and ensure overall efficiencies comparable to conventional processes while producing syngas with lower content of carbon dioxide.

  18. Low/medium-Btu coal-gasification assessment program for specific sites of two New York utilities

    Energy Technology Data Exchange (ETDEWEB)

    1980-12-01

    The scope of this study is to investigate the technical and economic aspects of coal gasification to supply low- or medium-Btu gas to the two power plant boilers selected for study. This includes the following major studies (and others described in the text): investigate coals from different regions of the country, select a coal based on its availability, mode of transportation and delivered cost to each power plant site; investigate the effects of burning low- and medium-Btu gas in the selected power plant boilers based on efficiency, rating and cost of modifications and make recommendations for each; and review the technical feasibility of converting the power plant boilers to coal-derived gas. The following two coal gasification processes have been used as the basis for this Study: the Combustion Engineering coal gasification process produces a low-Btu gas at approximately 100 Btu/scf at near atmospheric pressure; and the Texaco coal gasification process produces a medium-Btu gas at 292 Btu/scf at 800 psig. The engineering design and economics of both plants are described. Both plants meet the federal, state, and local environmental requirements for air quality, wastewater, liquid disposal, and ground level disposal of byproduct solids. All of the synthetic gas alternatives result in bus bar cost savings on a yearly basis within a few years of start-up because the cost of gas is assumed to escalate at a lower rate than that of fuel oil, approximately 4 to 5%.

  19. Gasification Studies Task 4 Topical Report, Utah Clean Coal Program

    Energy Technology Data Exchange (ETDEWEB)

    Whitty, Kevin [Univ. of Utah, Salt Lake City, UT (United States); Fletcher, Thomas [Univ. of Utah, Salt Lake City, UT (United States); Pugmire, Ronald [Univ. of Utah, Salt Lake City, UT (United States); Smith, Philip [Univ. of Utah, Salt Lake City, UT (United States); Sutherland, James [Univ. of Utah, Salt Lake City, UT (United States); Thornock, Jeremy [Univ. of Utah, Salt Lake City, UT (United States); Hunsacker, Isaac [Univ. of Utah, Salt Lake City, UT (United States); Li, Suhui [Univ. of Utah, Salt Lake City, UT (United States); Kelly, Kerry [Univ. of Utah, Salt Lake City, UT (United States); Puntai, Naveen [Univ. of Utah, Salt Lake City, UT (United States); Reid, Charles [Univ. of Utah, Salt Lake City, UT (United States); Schurtz, Randy [Univ. of Utah, Salt Lake City, UT (United States)

    2011-10-01

    A key objective of the Task 4 activities has been to develop simulation tools to support development, troubleshooting and optimization of pressurized entrained-flow coal gasifiers. The overall gasifier models (Subtask 4.1) combine submodels for fluid flow (Subtask 4.2) and heat transfer (Subtask 4.3) with fundamental understanding of the chemical (Subtask 4.4) and physical (Subtask 4.5) processes that take place as coal particles are converted to synthesis gas and slag. However, it is important to be able to compare predictions from the models against data obtained from actual operating coal gasifiers, and Subtask 4.6 aims to provide an accessible, non-proprietary system, which can be operated over a wide range of conditions to provide well-characterized data for model validation.

  20. Mineral-char interaction during gasification of high-ash coals in fluidized-bed gasification

    CSIR Research Space (South Africa)

    Oboirien, BO

    2011-09-01

    Full Text Available and Table 1. Coal Properties sample New Vaal Grootegeluk proximate analyses calori�c value (MJ/kg, ad) 18.11 21.40 ash (wt %, ad) 37.15 37.50 moisture (wt %, ad) 5.84 1.90 volatile matter (wt %, ad) 22.24 28.30 �xed carbon (wt %, ad) (calculation) 34...

  1. Construction of First GSP Gasification Unit Was Kicked off at Shenhua Ningxia Coal Industry (Group)Co.,Ltd.in China

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    @@ The construction of the core unit for the coal-based olefin project-the GSP gasification unit,the investment in which totals 20 billion RMB,has been kicked off at Shenhua Ningxia Coal Industry (Group) Co.,Ltd.,in Ningxia,China.It is told that this is the first gasification unit that adopts the GSP gasification technology in China.The GSP gasification unit adopts the Siemens technology,the basic design of which is implemented by the Uhde Engineering Company and the detailed design and procurement service of which will be performed by the No.2 Design Institute of Chemical Industry under the China National Chemical Engineering Group Corporation.

  2. Pyrolysis and gasification of coal at high temperatures. Final technical report, September 15, 1987--September 14, 1991

    Energy Technology Data Exchange (ETDEWEB)

    Zygourakis, K.

    1992-02-10

    The macropore structure of chars is a major factor in determining their reactivity during the gasification stage. The major objectives of this contract were to (a) quantify by direct measurements the effect of pyrolysis conditions of the macropore structure, and (b) establish how the macropores affected the reactivity pattern, the ignition behavior and the fragmentation of the char particles during gasification in the regime of strong diffusional limitations. Results from this project provide much needed information on the factors that affect the quality of the solid products (chars) of coal utilization processes (for example, mild gasification processes). The reactivity data will also provide essential parameters for the optimal design of coal gasification processes. (VC)

  3. Storing syngas lowers the carbon price for profitable coal gasification.

    Science.gov (United States)

    Newcomer, Adam; Apt, Jay

    2007-12-01

    Integrated gasification combined cycle (IGCC) electric power generation systems with carbon capture and sequestration have desirable environmental qualities but are not profitable when the carbon dioxide price is less than approximately $50 per metric ton. We examine whether an IGCC facility that operates its gasifier continuously butstores the syngas and produces electricity only when daily prices are high may be profitable at significantly lower CO2 prices. Using a probabilistic analysis, we have calculated the plant-level return on investment (ROI) and the value of syngas storage for IGCC facilities located in the U.S. Midwest using a range of storage configurations. Adding a second turbine to use the stored syngas to generate electricity at peak hours and implementing 12 h of above-ground high-pressure syngas storage significantly increases the ROI and net present value. Storage lowers the carbon price at which IGCC enters the U.S. generation mix by approximately 25%.

  4. Minerals in the Ash and Slag from Oxygen-Enriched Underground Coal Gasification

    Directory of Open Access Journals (Sweden)

    Shuqin Liu

    2016-03-01

    Full Text Available Underground coal gasification (UCG is a promising option for the recovery of low-rank and inaccessible coal resources. Detailed mineralogical information is essential to understand underground reaction conditions far from the surface and optimize the operation parameters during the UCG process. It is also significant in identifying the environmental effects of UCG residue. In this paper, with regard to the underground gasification of lignite, UCG slag was prepared through simulation tests of oxygen-enriched gasification under different atmospheric conditions, and the minerals were identified by X-Ray diffraction (XRD and a scanning electron microscope coupled to an energy-dispersive spectrometer (SEM-EDS. Thermodynamic calculations performed using FactSage 6.4 were used to help to understand the transformation of minerals. The results indicate that an increased oxygen concentration is beneficial to the reformation of mineral crystal after ash fusion and the resulting crystal structures of minerals also tend to be more orderly. The dominant minerals in 60%-O2 and 80%-O2 UCG slag include anorthite, pyroxene, and gehlenite, while amorphous substances almost disappear. In addition, with increasing oxygen content, mullite might react with the calcium oxide existed in the slag to generate anorthite, which could then serve as a calcium source for the formation of gehlenite. In 80%-O2 UCG slag, the iron-bearing mineral is transformed from sekaninaite to pyroxene.

  5. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Jordi Perez Mariano; Angel Sanjurjo

    2006-09-30

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. The primary activity this period was preparation and presentation of the findings on this project at the Twenty-Third annual Pittsburgh Coal Conference. Dr. Malhotra attended this conference and presented a paper. A copy of his presentation constitutes this quarterly report.

  6. Gasification in pulverized coal flames. First annual progress report, July 1975--June 1976

    Energy Technology Data Exchange (ETDEWEB)

    Lenzer, R. C.; George, P. E.; Thomas, J. F.; Laurendeau, N. M.

    1976-07-01

    This project concerns the production of power and synthesis gas from pulverized coal via suspension gasification. Swirling flow in both concentric jet and cyclone gasifiers will separate oxidation and reduction zones. Gasifier performance will be correlated with internally measured temperature and concentration profiles. A literature review of vortex and cyclone reactors is complete. Preliminary reviews of confined jet reactors and pulverized coal reaction models have also been completed. A simple equilibrium model for power gas production is in agreement with literature correlations. Cold gas efficiency is not a suitable performance parameter for combined cycle operation. The coal handling facility, equipped with crusher, pulverizer and sieve shaker, is in working order. Test cell flow and electrical systems have been designed, and most of the equipment has been received. Construction of the cyclone gasifier has begun. A preliminary design for the gas sampling system, which will utilize a UTI Q-30C mass spectrometer, has been developed.

  7. Process modelling and simulation of underground coal gasification: A Review of work done at IIT Bombay

    Science.gov (United States)

    Sharma, Surabhi; Mahajani, Sanjay M.

    2017-07-01

    This paper presents the summary of the work performed over the last decade, at IIT Bombay by the UCG group. The overall objective is to determine the feasibility of a given coal for underground coal gasification and then determine the capacity of a single pair of well through modelling and simulation. It would help one to design a UCG facility for the desired rate of gas production. The simulator developed in this study seeks inputs on four important aspects: Kinetics of all the reactions under the conditions of interest, heat and mass transfer limitations, if any, the flow patterns inside the cavity and lastly the thermo-mechanical failure of the coal. Each of them requires detailed studies in laboratory. Indian Lignite from one of the reserves was chosen as a case study.

  8. Advanced technology applications for second and third general coal gasification systems

    Science.gov (United States)

    Bradford, R.; Hyde, J. D.; Mead, C. W.

    1980-01-01

    The historical background of coal conversion is reviewed and the programmatic status (operational, construction, design, proposed) of coal gasification processes is tabulated for both commercial and demonstration projects as well as for large and small pilot plants. Both second and third generation processes typically operate at higher temperatures and pressures than first generation methods. Much of the equipment that has been tested has failed. The most difficult problems are in process control. The mechanics of three-phase flow are not fully understood. Companies participating in coal conversion projects are ordering duplicates of failure prone units. No real solutions to any of the significant problems in technology development have been developed in recent years.

  9. Aerosol emissions near a coal gasification plant in the Kosovo region, Yugoslavia

    Science.gov (United States)

    Boueres, Luis Carlos S.; Patterson, Ronald K.

    1981-03-01

    Ambient aerosol samples from the region of Kosovo, Yugoslavia, were collected and analyzed for their elemental composition in order to determine the effect on ambient air quality of Lurgi coal gasification carried out there using low BTU lignite. Low-volume aerosol samples were used to collect air particulate matter during May of 1979. These samplers were deployed at five sites near the Kosovo industrial complex which is comprised of coal gasifier, a coal-fired power plant and a fertilizer plant which uses the waste products from the gasifier and power plant. A total of 126 impactor sets and 10 week-long "streaker" filters were analyzed by PIXE at FSU for 16-18 elements providing a data base of approximately 16 000 elemental concentrations. Preliminary results are reported here with emphasis on the following elements: Si, S, Ca, Fe, Zn and Pb.

  10. Thermodynamic analyses of a biomass-coal co-gasification power generation system.

    Science.gov (United States)

    Yan, Linbo; Yue, Guangxi; He, Boshu

    2016-04-01

    A novel chemical looping power generation system is presented based on the biomass-coal co-gasification with steam. The effects of different key operation parameters including biomass mass fraction (Rb), steam to carbon mole ratio (Rsc), gasification temperature (Tg) and iron to fuel mole ratio (Rif) on the system performances like energy efficiency (ηe), total energy efficiency (ηte), exergy efficiency (ηex), total exergy efficiency (ηtex) and carbon capture rate (ηcc) are analyzed. A benchmark condition is set, under which ηte, ηtex and ηcc are found to be 39.9%, 37.6% and 96.0%, respectively. Furthermore, detailed energy Sankey diagram and exergy Grassmann diagram are drawn for the entire system operating under the benchmark condition. The energy and exergy efficiencies of the units composing the system are also predicted.

  11. Underground coal gasification (UCG: A new trend of supply-side economics of fossil fuels

    Directory of Open Access Journals (Sweden)

    Fei Mao

    2016-10-01

    Full Text Available China has a huge demand for energy. Under the present energy structure of rich coal, lean oil, less gas, limited and low-rising rate renewable energy, discussion focus is now on the high-efficient mining of coal as well as its clean-and-low-carbon use. In view of this, based on an analysis of the problems in the coal chemical industry and the present coal utilization ways such as Integrated Gasification Combined Cycle (IGCC, this paper proposes that underground coal gasification (UCG technology is a realistic choice. By virtue of its advantages in many aspects such as safety & environment, integrated use of superior resources, economic feasibility, etc. this technology can serve as the front-end support and guarantee for coal chemical industry and IGCC. Under the present situation, the following proposals were presented to promote the development of this technology. First, R&D of technical products should be strengthened, a comprehensive feasibility study assessment system should be established, and the relevant criteria in the industry should be formulated. Second, precise market positioning of UCG products should be made with much concern on the integrated economic indicators of each product's complete flow scheme, following the principle of “Technical Feasibility First, Economic Optimization Followed”. Third, a perfect operation and management pattern should be established with strict control over high-efficient, environmentally-friendly, safe, harmonious & compact objectives in the whole industry chain. In conclusion, to realize the large-scale UCG commercial production will strongly promote the optimization and innovation of fossil fuels supply-side economics in China.

  12. Coal reserves and resources as well as potentials for underground coal gasification in connection with carbon capture and storage (CCS)

    Science.gov (United States)

    Ilse, Jürgen

    2010-05-01

    . However, these otherwise unprofitable coal deposits can be mined economically by means of underground coal gasification, during which coal is converted into a gaseous product in the deposit. The synthesis gas can be used for electricity generation, as chemical base material or for the production of petrol. This increases the usability of coal resources tremendously. At present the CCS technologies (carbon capture and storage) are a much discussed alternative to other CO2 abatement techniques like efficiency impovements. The capture and subsequent storage of CO2 in the deposits created by the actual underground gasification process seem to be technically feasible.

  13. Coal Gasification Processes for Retrofitting Military Central Heating Plants: Overview

    Science.gov (United States)

    1992-11-01

    inorganic material remainitig after coal is completely combusted. At high temperatures, the ash will melt and clinkers may form. The ash composition ...was employed until 1941 by more than 9000 producers worldwide. Units installed in 1933 and 1948 are currently operating in South Africa . In 1980...Springs. South Africa Vaal Potteries Ltd. 1 8.5 Bituminous Operational Meyerton, South Africa Union Steel Corporation 2 10 Bituminous Operational

  14. Low- and medium-Btu coal gasification processes

    Energy Technology Data Exchange (ETDEWEB)

    Baker, N.R.; Blazek, C.F.; Tison, R.R.

    1979-01-01

    Coal gasifiers, for the production of low- and medium-Btu fuel gases, come in a wide variety of designs and capacities. For single gasifier vessels gas energy production rates range from about 1 to 18 billion Btu/day. The key characteristics of gasifiers that would be of importance for their application as an energy source in Integrated Community Energy Systems (ICES) are evaluated here. The types of gasifiers considered here are single- and two-stage, fixed-bed units; fluidized-bed units; and entrained-bed units, as producers of both low-Btu (less than 200 Btu/SCF and medium-Btu (200 to 400 Btu/SCF) gases. The gasifiers are discussed with respect to maximum and minimum capacity, the effect of feed coal parameters, product characteristics, thermal efficiency, environmental effects, operating and maintenance requirements, reliability, and cost. Some of the most recent development work in this area of coal conversion, and use of these gas products also is considered. Except in small plant installations (< 10/sup 9/ Btu/day) the annual operating costs for the various gasifier types are approximately the same. This is somewhat surprising in view of the personnel requirements, efficiencies, utility requirements, heating value of the product gas, and operating characteristics associated with each. Operating costs tend to increase with a power function exponent of 0.92 (i.e., a doubling in plant capacity increases the operating cost by about 1.9).

  15. Hazardous air pollutant testing at the LGTI coal gasification plant

    Energy Technology Data Exchange (ETDEWEB)

    Wetherold, R.G.; Williams, W.A.; Maxwell, D.P.; Mann, R.M.

    1995-06-01

    A comprehensive hazardous air pollutant test program was conducted in November 1994 at the Louisiana Gasification Technology, Inc. (LGTI), plant in Plaquemine, Louisiana. This program was sponsored by DOE/PETC, the Electric Power Research Institute (EPRI), and Destec Energy. In May of 1995, additional testing of the hot syngas stream was conducted at the LGTI facility under this same program. DOE/METC provided additional technical support for the hot gas testing effort. In this paper, the sampling and analytical methods used during the November and May test program are summarized. The hot gas testing is described in greater detail. In particular, the hot gas sampling probe and probe insertion/withdrawal system are discussed. The sampling probe was designed to collect particulate and extract gas samples at process temperature and pressure. The design of the probe system is described, and the operating procedures are summarized. The operation of the probe during the testing is discussed, and photographs of the testing are provided. In addition to the summaries and descriptions of the test methodologies, selected preliminary emissions results of the November sampling are included in the paper.

  16. Toxicologic studies of emissions from coal gasification process. I. Subchronic feeding studies.

    Science.gov (United States)

    Kostial, K; Kello, D; Blanusa, M; Maljković, T; Rabar, I; Bunarević, A; Stara, J F

    1980-09-01

    The increasing use of new sources of energy may result in additional contamination of the human environment with inorganic and organic pollutants which are not yet adequately investigated with regard to their potential impact on human health. However, some evidence exists that several trace inorganic and organic contaminants found in coal processing residues may constitute potential health problems. Therefore, the comparative biological hazards of solid wastes and effluents from a Lurgi coal gasification plant were initially evaluated using acute and chronic feeding experiments in male and female rats. In the subchronic experiment, six-week old animals were fed diets wih various levels of ash (slag) additive (0.5%, 1%, and 5%) for period of 16 weeks. Following exposure, blood samples were taken and 22-hour urine samples were collected. Livers and kidneys, and testicles in males, were taken for trace element analysis or histologic examination. The urinary values, erythrocyte and leucocyte count, hemoglobin, packed cell volume, and concentration of trace elements in exposed animals were determined. The addition of ash (slag) to the diet in concentrations much higher than expected in conditions of environmental contamination had no measurable health effects. Although these initial results obtained in relatively short-term experiments cannot be directly extrapolated to human health effects, particularly not for carcinogenic assessment, there is an indication that exposure to solid wastes from the coal gasification plant may not be toxic.

  17. Reactions between sodium and silicon minerals during gasification of low-rank coal

    Energy Technology Data Exchange (ETDEWEB)

    D.P. Ross; A. Kosminski; J.B. Agnew [University of Adelaide, Adelaide, SA (Australia). Cooperative Research Centre for Clean Power from Lignite, School of Chemical Engineering

    2003-07-01

    The main objective of this study was to elucidate the role of sodium and silicon minerals in formation of liquid phases during gasification of a high-sulphur low-rank Australian coal. The organically-bound sodium was found to be transformed into sodium carbonate, contrary to thermodynamic predictions of the formation of sodium sulphide. Up to half of the sodium was vaporised from the char. Volatilisation of sodium increased with temperature and time, and dependent on the gas environment. Sodium chloride present in coal either vaporised or partly reacted with the coal to form sodium carbonate. The release of sodium was disproportionate to that of chlorine. Steam was found, both theoretically and experimentally, to be the most important component of the gasification environment. Steam substantially reduced the melting temperature of sodium carbonate. Consequently, gasification with steam resulted in the formation, via a liquid-solid state reaction, of liquid silicates at temperatures as low as 750{degree}C. Sodium chloride and silica reacted only in steam and to form fused silicates at 750{degree}C, with the rate of silicate formation substantially slower than for reaction between silica and sodium carbonate. Formation of silicates around silica particles and fused silicate joints between individual silica grains inside the char were established to occur uniformly throughout the char particles. Experimental results showed that kaolin and organic bound sodium react upon reaching 650{degree}C to form a solid sodium aluminosilicate, with a melting point above 1250{degree}C. A similar reaction occurs with sodium chloride, but at a slower rate dependent on the temperature, time and gas atmosphere. Importantly, the reactions of sodium with kaolin prevented reactions with silica in forming liquid silicates.

  18. Conceptual design and retrofitting of the coal-gasification wastewater treatment process

    Energy Technology Data Exchange (ETDEWEB)

    Gai, H.; Jiang, Y.; Qian, Y.; Kraslawski, A. [South China University of Technology, Ghangzhou (China). School of Chemical Engineering

    2008-05-15

    The coal-gasification wastewater treatment is the most difficult pollution control task for coal-gasification plants. It is identified that there are two serious problems occurring in the current treatment process, i.e., low performance of phenols removal and plugging induced by ammonia salts. A new treatment process is proposed in this paper to solve these severe problems and pursue clean production. First, ammonia stripping is accomplished before phenols recovery to reduce pH value of the wastewater and to improve the phenols removal performance of extraction. Second, a complex stripper with a side draw is introduced to stripping ammonia and sour gas simultaneously. It is done to eliminate the ionic interaction during stripping and to improve the removal performance of ammonia and sour gas (carbon dioxide and hydrogen sulphide). Finally, methyl isobutyl ketone (MIBK) is used as extraction solvent instead of diisopropyl ether (DIPE) for further improvement of the phenols removal performance. Conceptual design of the proposed process is accomplished for a large-scale coal-gasification plant based on process simulation. With the proposed process, the concentration of carbon dioxide, hydrogen sulphide and ammonia in wastewater are reduced to trace, less than 10 mg/L, and about 30 mg/L, respectively. As a result, pH value of the wastewater is reduced from >9 to <7 before extraction, thus the phenols removal performance is greatly improved. Compare to the current process, the removal ratios increase from 60% to 99% for carbon dioxide, 96% to 99.6% for ammonia, and 80% to 94% for total phenols using the proposed process. In consequence, the biochemical treatment of wastewater becomes easier. The economical analysis shows that the operating cost of the proposed process is much lower than that of the current process.

  19. An effect of Blade geometry on heat transfer performance in stirred vessel – coal water slurry system using coal gasification

    Directory of Open Access Journals (Sweden)

    C.M.Raguraman,

    2010-04-01

    Full Text Available The effect of the geometrical parameter of blades on heat transfer co-efficient were experimentally studied for agitated vessels using coal slurry in coal gasification. The intensity of hear transfer during mixing of fluids depends on the type of the stirrer, the design of the vessel and conditions of the process. The type and size of the stirrer, as well as its location in the vessel, also affect the rate of hear transfer. In this study, the effect of some importantdesign parameter such as the type of stirrer, angle and shape of blades, number of blades and location of stirrer, etc., were investigated and optimized. Besides, the Taguchi method can successfully be applied to heat transfer investigation to save energy, time and material in experimentation.

  20. Current Status of Coal Gasification Technology in China%国内煤气化技术现状

    Institute of Scientific and Technical Information of China (English)

    孙曙光

    2014-01-01

    简要介绍煤气化技术的原理和种类,重点阐述国内煤气化技术的研究进展和工业应用现状,指出国内煤气化技术发展存在的问题及未来的发展方向。%The paper describes the principle and classification of coal-gasification technology and points out the problems that are encountered in the development of the coal-gasification technology and the developing trend in China.

  1. Fugitive emission testing at the Kosovo coal gasification plant. Final task report Apr 79-Sep 81. [Yugoslavia

    Energy Technology Data Exchange (ETDEWEB)

    Honerkamp, R.L.; Dalrymple, D.A.

    1983-06-01

    The report summarizes results of a test program to characterize fugitive emissions from the Kosovo coal gasification plant in Yugoslavia, a test program implemented by the EPA in response to a need for representative data on the potential environmental impacts of Lurgi coal gasification technology. Major objectives of the fugitive emissions assessment were to: (1) determine the frequency of leak occurrence, (2) measure leak rates from leak sources, (3) estimate total fugitive emissions from leakage, and (4) compare the results to other fugitive emission test data. Study results show similarities to results of fugitive emission testing in U.S. oil refineries and organic chemical plants.

  2. Circulating fluidized bed gasification of low rank coal: Influence of O2/C molar ratio on gasification performance and sulphur transformation

    Science.gov (United States)

    Zhang, Haixia; Zhang, Yukui; Zhu, Zhiping; Lu, Qinggang

    2016-08-01

    To promote the utilization efficiency of coal resources, and to assist with the control of sulphur during gasification and/or downstream processes, it is essential to gain basic knowledge of sulphur transformation associated with gasification performance. In this research we investigated the influence of O2/C molar ratio both on gasification performance and sulphur transformation of a low rank coal, and the sulphur transformation mechanism was also discussed. Experiments were performed in a circulating fluidized bed gasifier with O2/C molar ratio ranging from 0.39 to 0.78 mol/mol. The results showed that increasing the O2/C molar ratio from 0.39 to 0.78 mol/mol can increase carbon conversion from 57.65% to 91.92%, and increase sulphur release ratio from 29.66% to 63.11%. The increase of O2/C molar ratio favors the formation of H2S, and also favors the retained sulphur transforming to more stable forms. Due to the reducing conditions of coal gasification, H2S is the main form of the released sulphur, which could be formed by decomposition of pyrite and by secondary reactions. Bottom char shows lower sulphur content than fly ash, and mainly exist as sulphates. X-ray photoelectron spectroscopy (XPS) measurements also show that the intensity of pyrite declines and the intensity of sulphates increases for fly ash and bottom char, and the change is more obvious for bottom char. During CFB gasification process, bigger char particles circulate in the system and have longer residence time for further reaction, which favors the release of sulphur species and can enhance the retained sulphur transforming to more stable forms.

  3. Co-gasification of coal/sewage sludge and gas turbine development

    Energy Technology Data Exchange (ETDEWEB)

    Kelsall, G.J.; Laughlin, K.; Davison, J.E.; Smith, M.A. [ed.] [British Coal Corporation, Stoke Orchard (United Kingdom). Coal Technology Development Division

    1995-12-31

    The project investigated the ability of the Air Blown Gasification Cycle (ABGC), formerly known as the British Coal Topping Cycle, to co-utilise coal and pelletised sewage sludge in the CTDU pressurised gasifier. The co-firing coal and pelletised sewage sludge in the CTDD pressurised gasifier did not have an adverse effect on the gasifier operability or process performance over the parameter range studied, provided that the carbon (in fuel) to oxygen (in fluidising air) input ratio was fixed. For all test conditions, sustained ash agglomeration-free operation was achieved. Tar levels were low and fines elutriation rates remained constant. The sulphur retention efficiency attained during co-gasification with limestone addition was high. This indicates that there may be scope for reducing sorbent requirements. Plant efficiencies for an IGCC plant co-firing straw and coal were predicted to decrease if lockoppers had to be used. However, it should be possibly to virtually eliminate this penalty if an advanced feeding system could be developed. The feeding of straw to an ABGC plant using lock hoppers should not incur a reduction in plant efficiency. The addition of sewage sludge to IGCC and ABGC plants was predicted to reduce the cost of electricity provided that the gate fee for sewage sludge was above 20 UK pounds per tonne. Two designs of turbine combustor based on the tubo-annual design principle were tested, burning both synthetic and coal/sewage sludge-derived fuel gases. Combustor performance was improved substantially by increasing the size of the flame-tube diameter from 82.5 mm to 125 mm, by increasing the residence time within the primary zone and by changing the combustor cooling approach to one which utilised a combination of film and impingement cooling. Emissions of CO and NO{sub x} were very low. 6 refs., 2 figs., 5 tabs.

  4. Coal gasification systems engineering and analysis. Appendix F: Critical technology items/issues

    Science.gov (United States)

    1980-01-01

    Critical technology items and issues are defined in which there is a need for developmental research in order to assure technical and economic success for the state of the art of coal gasification in the United States. Technology development needs for the main processing units and the supporting units are discussed. While development needs are shown for a large number of systems, the most critical areas are associated with the gasifier itself and those systems which either feed the gasifier or directly receive products form the gasifier.

  5. Effects of Pressure on the Properties of Coal Char Under Gasification Conditions at High Initial Heating Rates

    Science.gov (United States)

    Shurtz, Randy Clark

    The effects of elevated pressure and high heating rates on coal pyrolysis and gasification were investigated. A high-pressure flat-flame burner (HPFFB) was designed and built to conduct these studies. The HPFFB was designed to provide an environment with laminar, dispersed entrained flow, with particle heating rates of ˜105 K/s, pressures of up to 15 atm, and gas temperatures of up to 2000 K. Residence times were varied from 30 to 700 ms in this study. Pyrolysis experiments were conducted at particle heating rates of ˜10 5 K/s and maximum gas temperatures of ˜1700 K at pressures of 1 to 15 atm. A new coal swelling correlation was developed that predicts the effects of heating rate, pressure, and coal rank on the swelling ratio at heating rates above ˜104 K/s. A coal swelling rank index system based on 13C-NMR chemical structural parameters was devised. The empirical swelling model requires user inputs of the coal ultimate and proximate analyses and the use of a transient particle energy balance to predict the maximum particle heating rate. The swelling model was used to explain differences in previously reported bituminous coal swelling ratios that were measured in facilities with different heating rates. Char gasification studies by CO2 were conducted on a subbituminous coal and 4 bituminous coals in the HPFFB. Pressures of 5, 10, and 15 atmospheres were used with gas compositions of 20, 40, and 90 mole % CO2. Gas conditions with peak temperatures of 1700 K to 2000 K were used, which resulted in char particle temperatures of 1000 K to 1800 K. Three gasification models were developed to fit and analyze the gasification data. A simple 1 st--order model was used to show that the measured gasification rates were far below the film-diffusion limit. The other two models, designated CCK and CCKN, were based on three versions of the CBK models. CCKN used an nth--order kinetic mechanism and CCK used a semi-global Langmuir-Hinshelwood kinetic mechanism. The two CCK

  6. Coal gasification systems engineering and analysis. Appendix B: Medium B+U gas design

    Science.gov (United States)

    1980-01-01

    A four module, 20,000 TPD, based on KT coal gasification technology was designed. The plant processes Kentucky No. 9 coal with provisions for up to five percent North Alabama coal. Medium BTU gas with heat content of 305 BTU/SCF and not more than 200 ppm sulfur is the primary plant product. Sulfur is recovered for scale as prilled sulfur. Ash disposal is on site. The plant is designed for zero water discharge. Trade studies provided the basis for not using boiler produced steam to drive prime movers. Thus process derived steam in excess of process requirements in superheated for power use in prime movers. Electricity from the TVA grid is used to supply the balance of the plant prime mover power requirements. A study of the effect of mine mouth coal cleaning showed that coal cleaning is not an economically preferred route. The design procedure involved defining available processes to meet the requirements of each system, technical/economic trade studies to select the preferred processes, and engineering design and flow sheet development for each module. Cost studies assumed a staggered construction schedule for the four modules beginning spring 1981 and a 90% on stream factor.

  7. Mutagenicity of products from coal gasification and liquefaction in the Salmonella/microsome assay.

    Science.gov (United States)

    Schoeny, R; Warshawsky, D; Hollingsworth, L; Hund, M; Moore, G

    1981-01-01

    As a first step in the assessment of their possible bio-effects, coal-related materials were tested for mutagenicity in the Salmonella/microsome assay. Of three coal gasification by-products tested, only a tar was mutagenic for any of four Salmonella strains. The following liquefaction materials were mutagenic for strains TA1538, TA98, and/or TA100: A liquefaction vehicle oil and coal hydrogenation filtered liquid, separated bottoms, vacuum overhead, and vacuum bottoms. Neither powdered coal nor water produced as a by-product of the hydrogenation process was positive in the Salmonella test. No coal-related material was mutagenic for the missense mutant TA1535 or for any strain in the absence of metabolic activation provided by rat hepatic homogenates (S9). In all but one instance Aroclor 1254-induced S9 provided the maximum activation for mutagenesis. Fractionation of all samples was undertaken by serial extraction with organic solvents of increasing polarity (hexane, toluene, methylene chloride, acetonitrile). Highly mutagenic materials were found in fractions of the hydrogenation filtered liquid, vacuum overhead, and vacuum bottoms. Thus far non-mutagenic samples have not yielded mutagenic components upon fractionation.

  8. Effect of Gasifying Medium on the Coal Chemical Looping Gasification with CaSO4 as Oxygen Carrier☆

    Institute of Scientific and Technical Information of China (English)

    Yongzhuo Liu; Weihua Jia; Qingjie Guo; Hojung Ryu

    2014-01-01

    The chemical looping gasification uses an oxygen carrier for solid fuel gasification by supplying insufficient lattice oxygen. The effect of gasifying medium on the coal chemical looping gasification with CaSO4 as oxygen carrier is investigated in this paper. The thermodynamical analysis indicates that the addition of steam and CO2 into the system can reduce the reaction temperature, at which the concentration of syngas reaches its maximum value. Experimental result in thermogravimetric analyzer and a fixed-bed reactor shows that the mixture sample goes through three stages, drying stage, pyrolysis stage and chemical looping gasification stage, with the temper-ature for three different gaseous media. The peak fitting and isoconversional methods are used to determine the reaction mechanism of the complex reactions in the chemical looping gasification process. It demonstrates that the gasifying medium (steam or CO2) boosts the chemical looping process by reducing the activation energy in the overall reaction and gasification reactions of coal char. However, the mechanism using steam as the gasifying medium differs from that using CO2. With steam as the gasifying medium, parallel reactions occur in the begin-ning stage, followed by a limiting stage shifting from a kinetic to a diffusion regime. It is opposite to the reaction mechanism with CO2 as the gasifying medium.

  9. Isolation of a highly mutagenic aminophenanthrene from a coal gasification process tar.

    Science.gov (United States)

    Haugen, D A; Stamoudis, V C; Peak, M J; Boparai, A S

    1986-02-01

    A major portion of the mutagenic activity associated with products and by-products of coal conversion can be ascribed to nitrogen-containing bases. We improved the extraction efficiencies for three- to five-ring aromatic bases by extracting them with a mixture of methanol and aqueous HCl, rather than with aqueous HCl alone. A complex mutagenic basic fraction of a coal gasification process tar was successively fractionated using cation exchange and reversed phase high-performance liquid chromatography. The fractions were assayed for mutagenic activity and were chemically analyzed by gas chromatography and gas chromatography-mass spectrometry. Aminophenanthrenes were identified as major contributors to the mutagenicity of the basic fraction. Aminonaphthalenes, aminobiphenyls, and their alkyl homologs were also present but were not detected as principal mutagens.

  10. State of the art of biological processes for coal gasification wastewater treatment.

    Science.gov (United States)

    Zhao, Qian; Liu, Yu

    2016-01-01

    The treatment of coal gasification wastewater (CGW) poses a serious challenge on the sustainable development of the global coal industry. The CGW contains a broad spectrum of high-strength recalcitrant substances, including phenolic, monocyclic and polycyclic aromatic hydrocarbons, heterocyclic nitrogenous compounds and long chain aliphatic hydrocarbon. So far, biological treatment of CGW has been considered as an environment-friendly and cost-effective method compared to physiochemical approaches. Thus, this reviews aims to provide a comprehensive picture of state of the art of biological processes for treating CGW wastewater, while the possible biodegradation mechanisms of toxic and refractory organic substances were also elaborated together with microbial community involved. Discussion was further extended to advanced bioprocesses to tackle high-concentration ammonia and possible options towards in-plant zero liquid discharge.

  11. Availability (exergetic) analysis of coal gasification processes. Part II. The Synthane process

    Energy Technology Data Exchange (ETDEWEB)

    Johnson, P.; Conger, W.L.

    1982-01-01

    The efficiency and economics of the Synthane Gasification process are evaluated and discussed. The efficiency of the Synthane process was determined using the 'availability analysis' approach to process evaluation and is given here as an example of the use of that approach. Computer simulation of the Synthane process was used to study the effect of changes in plant operating parameters on both the efficiency and economics of the process. Results of the availability analysis include an overall exergetic efficiency of 61.2 % for the operation of the Synthane plant with a Pittsburgh Seam feed coal, and an overall exergetic efficiency of 61.1 % for a Wyodak Seam feed coal. Increasing the ratio of steam to oxygen fed to the gasifier from 6.83 to 10.0 was found to increase the overall exergetic efficiency from 61.2 % to 64.6 % with a Pittsburgh feed coal. Utilizing an alternative methanator design similar to one presented in a IGT HYGAS process design was found to increase the overall efficiency to 62.3 % with the Pittsburgh feed coal and to 61.9 percent of the Wyodak feed coal. The production cost of the synthetic natural gas (SNG) product from the Synthane process was found to be 4.61 dollars/GJ with the Pittsburgh feed coal, and 6.23 dollars/GJ with the Wyodak feed coal, in third quarter 1979 dollars. The SNG production cost was found to decrease from 4.61 dollars/GJ to 4.37 dollars/GJ when the ratio of steam to oxygen fed to the gasifier was increased from 6.83 to 10.0. A 50 % increase in coal cost was found to increase the SNG production cost by 15 % and 18 % for the Pittsburgh and Wyodak feed coals, respectively, while a 100 % increase in coal cost increased the SNG production cost by 30 % and 36 %, respectively. Changing to the alternative (HYGAS) methanator design resulted in a decrease of 0.21 dollars/GJ in the SNG production cost for the Pittsburg feed coal, and a decrease of 0.26 dollars/GJ for the Wyodak coal.

  12. Molten salt coal gasification process development unit. Phase 1. Volume 1. PDU operations. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kohl, A.L.

    1980-05-01

    This report summarizes the results of a test program conducted on the Molten Salt Coal Gasification Process, which included the design, construction, and operation of a Process Development Unit. In this process, coal is gasified by contacting it with air in a turbulent pool of molten sodium carbonate. Sulfur and ash are retained in the melt, and a small stream is continuously removed from the gasifier for regeneration of sodium carbonate, removal of sulfur, and disposal of the ash. The process can handle a wide variety of feed materials, including highly caking coals, and produces a gas relatively free from tars and other impurities. The gasification step is carried out at approximately 1800/sup 0/F. The PDU was designed to process 1 ton per hour of coal at pressures up to 20 atm. It is a completely integrated facility including systems for feeding solids to the gasifier, regenerating sodium carbonate for reuse, and removing sulfur and ash in forms suitable for disposal. Five extended test runs were made. The observed product gas composition was quite close to that predicted on the basis of earlier small-scale tests and thermodynamic considerations. All plant systems were operated in an integrated manner during one of the runs. The principal problem encountered during the five test runs was maintaining a continuous flow of melt from the gasifier to the quench tank. Test data and discussions regarding plant equipment and process performance are presented. The program also included a commercial plant study which showed the process to be attractive for use in a combined-cycle, electric power plant. The report is presented in two volumes, Volume 1, PDU Operations, and Volume 2, Commercial Plant Study.

  13. Determination of biological removal of recalcitrant organic contaminants in coal gasification waste water.

    Science.gov (United States)

    Ji, Qinhong; Tabassum, Salma; Yu, Guangxin; Chu, Chunfeng; Zhang, Zhenjia

    2015-01-01

    Coal gasification waste water treatment needed a sustainable and affordable plan to eliminate the organic contaminants in order to lower the potential environmental and human health risk. In this paper, a laboratory-scale anaerobic-aerobic intermittent system carried out 66 operational cycles together for the treatment of coal gasification waste water and the removal capacity of each organic pollutant. Contaminants included phenols, carboxylic acids, long-chain hydrocarbons, and heterocyclic compounds, wherein the relative content of phenol is up to 57.86%. The long-term removal of 77 organic contaminants was evaluated at different hydraulic retention time (anaerobic24 h + aerobic48 h and anaerobic48 h +aerobic48 h). Contaminant removal ranged from no measurable removal to near-complete removal with effluent concentrations below the detection limit. Contaminant removals followed one of four trends: steady-state removal throughout, increasing removal to steady state (acclimation), decreasing removal, and no removal. Organic degradation and transformation in the reaction were analysed by gas chromatography/mass spectrometry technology.

  14. [Inhibition of Denitrification by Total Phenol Load of Coal Gasification Wastewater].

    Science.gov (United States)

    Zhang, Yu-ying; Chen, Xiu-rong; Wang, Lu; Li, Jia-hui; Xu, Yan; Zhuang, You-jun; Yu, Ze-ya

    2016-03-15

    High loaded phenolic pollutants, refractory and high toxic, which existed in coal gasification wastewater, could cause the inhibition of sludge activity. In biological denitrification process of activated sludge treatment system, people tend to focus on the phenol inhibition on the efficiency and activity of nitrifying bacteria while there are few researches on the denitrification process. In order to investigate the inhibition of phenolic compounds from coal gasification wastewater on the denitrification and sludge activity, we used anoxic denitrification system to indentify the influence of different phenol load on denitrification efficiency (removal efficiency of NO₃⁻-N and NO₂⁻-N) as well as the stress and degradation activity of sludge. The results showed that when the concentration of total phenol was changed from 50 mg · L⁻¹ to 200 mg · L⁻¹, the removal rates of NO₃⁻-N and NO₂⁻-N were changed from 55% and 25% to 83% and 83% respectively. In the process of sludge domestication, the characteristics of denitrifying sludge were influenced to a certain degree.

  15. A study of toxic emissions from a coal-fired gasification plant. Final report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-12-01

    Under the Fine Particulate Control/Air Toxics Program, the US Department of Energy (DOE) has been performing comprehensive assessments of toxic substance emissions from coal-fired electric utility units. An objective of this program is to provide information to the US Environmental Protection Agency (EPA) for use in evaluating hazardous air pollutant emissions as required by the Clean Air Act Amendments (CAAA) of 1990. The Electric Power Research Institute (EPRI) has also performed comprehensive assessments of emissions from many power plants and provided the information to the EPA. The DOE program was implemented in two. Phase 1 involved the characterization of eight utility units, with options to sample additional units in Phase 2. Radian was one of five contractors selected to perform these toxic emission assessments.Radian`s Phase 1 test site was at southern Company Service`s Plant Yates, Unit 1, which, as part of the DOE`s Clean Coal Technology Program, was demonstrating the CT-121 flue gas desulfurization technology. A commercial-scale prototype integrated gasification-combined cycle (IGCC) power plant was selected by DOE for Phase 2 testing. Funding for the Phase 2 effort was provided by DOE, with assistance from EPRI and the host site, the Louisiana Gasification Technology, Inc. (LGTI) project This document presents the results of that effort.

  16. Removal of phenol by powdered activated carbon prepared from coal gasification tar residue.

    Science.gov (United States)

    Wang, Xiong-Lei; Shen, Jun; Niu, Yan-Xia; Wang, Yu-Gao; Liu, Gang; Sheng, Qing-Tao

    2017-04-10

    Coal gasification tar residue (CGTR) is a kind of environmentally hazardous byproduct generated in fixed-bed coal gasification process. The CGTR extracted by ethyl acetate was used to prepare powdered activated carbon (PAC), which is applied later for adsorption of phenol. The results showed that the PAC prepared under optimum conditions had enormous mesoporous structure, and the iodine number reached 2030.11 mg/g, with a specific surface area of 1981 m(2)/g and a total pore volume of 0.92 ml/g. Especially, without loading other substances, the PAC, having a strong magnetism, can be easily separated after it adsorbs phenol. The adsorption of phenol by PAC was studied as functions of contact time, temperature, PAC dosage, solution concentration and pH. The results showed a fast adsorption speed and a high adsorption capacity of PAC. The adsorption process was exothermic and conformed to the Freundlich models. The adsorption kinetics fitted better to the pseudo-second-order model. These results show that CGTR can be used as a potential adsorbent of phenols in wastewater.

  17. DOE Coal Gasification Multi-Test Facility: fossil fuel processing technical/professional services

    Energy Technology Data Exchange (ETDEWEB)

    Hefferan, J.K.; Lee, G.Y.; Boesch, L.P.; James, R.B.; Rode, R.R.; Walters, A.B.

    1979-07-13

    A conceptual design, including process descriptions, heat and material balances, process flow diagrams, utility requirements, schedule, capital and operating cost estimate, and alternative design considerations, is presented for the DOE Coal Gasification Multi-Test Facility (GMTF). The GMTF, an engineering scale facility, is to provide a complete plant into which different types of gasifiers and conversion/synthesis equipment can be readily integrated for testing in an operational environment at relatively low cost. The design allows for operation of several gasifiers simultaneously at a total coal throughput of 2500 tons/day; individual gasifiers operate at up to 1200 tons/day and 600 psig using air or oxygen. Ten different test gasifiers can be in place at the facility, but only three can be operated at one time. The GMTF can produce a spectrum of saleable products, including low Btu, synthesis and pipeline gases, hydrogen (for fuel cells or hydrogasification), methanol, gasoline, diesel and fuel oils, organic chemicals, and electrical power (potentially). In 1979 dollars, the base facility requires a $288 million capital investment for common-use units, $193 million for four gasification units and four synthesis units, and $305 million for six years of operation. Critical reviews of detailed vendor designs are appended for a methanol synthesis unit, three entrained flow gasifiers, a fluidized bed gasifier, and a hydrogasifier/slag-bath gasifier.

  18. Instrumentation for in situ coal gasification: an assessment of techniques evaluated on the Hanna II experiment

    Energy Technology Data Exchange (ETDEWEB)

    Northrop, D.A.; Beard, S.G.; Bartel, L.C.; Beckham, L.W.; Hommert, P.J.

    1977-09-01

    The Hanna II in-situ coal gasification experiment was conducted by the Laramie Energy Research Center during 1975 to 76. Sandia Laboratories designed, fielded, and evaluated variations of seven instrumentation techniques belonging to two general classes: (a) diagnostic techniques (thermal, in-seam gas sampling and pressure, and overburden tilt and displacement) to obtain data for process characterization and (b) remote monitoring techniques (electrical, passive acoustic, and induced seismic) being developed to provide a continuous, real-time map of the in-situ process for application in a process control system. Assessments of these techniques have been made with respect to feasibility, information obtainable, and possible future development and applications. In general, very positive assessments were obtained. Extensive thermocouple arrays, which incorporated special branched circuitry for data validation, provided the most detailed characterization of in-situ coal gasification yet obtained. The feasibility of in-seam gas sampling and pressure measurements was demonstrated and composition changes due to the advancing reaction front were detailed. The thermocouple circuits and gas sampling and pressure canisters are part of a diagnostic well specification now under development for general in-situ applications. Promising results were obtained for two remote monitoring techniques. Direct excitation electrical potential and a modified Schlumberger technique. Contour maps of potential data from a surface array showed the location and movement of the reaction at 300 ft depth. Mapping the source of process-related acoustic signals was shown to be feasible. Borehole-to-borehole induced seismic techniques were able to delineate the advance of the gasification process.

  19. Co-gasification of meat and bone meal with coal in a fluidised bed reactor

    Energy Technology Data Exchange (ETDEWEB)

    E. Cascarosa; L. Gasco; G. Gea; J.L. Sanchez; J. Arauzo [Universidad de Zaragoza (Spain). Thermochemical Processes Group

    2011-08-15

    After the Bovine Spongiform Encephalopathy illness appeared, the meat and bone meat (MBM) produced from animal residues became an important waste. In spite of being a possible fuel due to its heating value (around 21.4 MJ/kg), an important fraction of the meat and bone meal is being sent to landfills. The aim of this work is to evaluate the co-gasification of low percentages of meat and bone meal with coal in a fluidised bed reactor as a potential waste management alternative. The effect of the bed temperature (800-900{sup o}C), the equivalence ratio (0.25-0.35) and the percentage of MBM in the solid fed (0-1 wt.%) on the co-gasification product yields and properties is evaluated. The results show the addition of 1 wt.% of MBM in a coal gasification process increases the gas and the liquid yield and decreases the solid yield at 900{sup o}C and 0.35 of temperature and equivalence ratio operational conditions. At operational conditions of 900{sup o}C and equivalence ratio of 0.35, the specific yield to gas (y{sub gas}) increases from 3.18 m{sup 3}(STP)/kg to 4.47 m{sup 3}(STP)/kg. The gas energy yield decreased 24.1% and the lower heating value of the gas decreases from 3.36 MJ/m{sup 3}(STP) to 2.16 MJ/m{sup 3}(STP). The concentration of the main gas components (H{sub 2}, CO and CO{sub 2}) hardly varies with the addition of MBM, however the light hydrocarbon concentrations decrease and the H{sub 2}S concentration increases at the higher temperature (900{sup o}C). 32 refs., 9 figs., 7 tabs.

  20. The Buggenum coal gasification power plant - associated material and residue investigations; Das Kohlevergasungswerk Buggenum - begleitende Werkstoff- und Rueckstandsuntersuchungen

    Energy Technology Data Exchange (ETDEWEB)

    Liere, J. van [N.V. KEMA, Arnheim (Netherlands); Bakker, W.T. [EPRI, Palo Alto, CA (United States); Bolt, N. [N.V. KEMA, Arnheim (Netherlands)

    1995-01-01

    Following an introduction on the present status of coal gasification technology, a review follows of current knowledge about materials for high-reducing synthetic gas in coal gasification plants. Present practice indicates that most metal alloys are used as heat exchangers for evaporation at 350 to 450 C. Materials for gasification technology have been researched since the end of the 1970s; several commercially available materials have been investigated. In addition, the utilization of slag is being examined. Today, a multiplicity of applications are available. (orig.) [Deutsch] Nach der Vorstellung des heutigen Standes der Kohlevergasungstechnologie folgt eine Uebersicht der heutigen Kenntnisse ueber Werkstoffe fuer hochreduzierendes Syngas in Kohlevergasungsanlagen. Die heutige Praxis zeigt, dass die meisten Metallegierungen als Waermeaustauscher benutzt werden fuer das Verdampfen bei 350 bis 450 C. Werkstoffe fuer die Vergasungstechnologie werden seit Ende der 70er Jahre erforscht; mehrere kommerziell erhaeltliche Werkstoffe wurden untersucht. Auch die Verwendung der Schlacke ist untersucht worden. Heute steht eine Vielzahl von Anwendungen zur Verfuegung. (orig.)

  1. Coal Technology Program progress report, March 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-05-01

    In the final hydrocarbonization experiment with Wyodak subbituminous coal, the coal was hydrocarbonized at 1100/sup 0/F and 300 psig in the recirculating fluidized bed. Two-dimensional pyrolysis behavior of an eastern bituminous coal (Pittsburgh seam) continues to be examined. Results to date indicate that swelling is significantly more pronounced at very low heating rates. Several activities in progress are related to inspection techniques for wear- and process-resistant coatings. Experimental investigations of fireside corrosion on tubing from a fluidized bed combustor have proceeded with metallographic examination and analyses of the scale formed during the test exposure. Methods for nondestructively determining remaining tube wall thickness and scale thickness were developed. Failure prevention and analysis work was aimed at several parts from the Solvent Refined Coal Plant in Ft. Lewis, Washington. The mechanical design of the gas-fired potassium boiler system was completed with the issue of the last four drawings. One electrical and five instrument and control drawings were completed and some fabrication work was completed. Surveys of industrial coal conversion capabilities continued with emphasis on rotating components, valves, hot gas cleanup devices, and heat recovery equipment. Process and program analysis research studies continued with work on low-Btu gasification, direct combustion, advanced power conversion, liquefaction, high-Btu gasification, in-situ gasification, and beneficiation. In the fossil energy environmental project, a first draft of a landfill assessment report was issued for review. Work continued on the Environmental Monitoring Handbook and Pipeline Gas Programmatic Assessment.

  2. Up against Giants: The National Indian Youth Council, the Navajo Nation, and Coal Gasification, 1974-77

    Science.gov (United States)

    Shreve, Bradley Glenn

    2006-01-01

    In the spring of 1977, members of the National Indian Youth Council (NIYC), along with the Coalition for Navajo Liberation, barraged the Secretary of the Interior and the chairman of the Navajo Nation with petitions calling for a halt to the proposed construction of several coal gasification plants on the Navajo Reservation in northwestern New…

  3. Toxicity studies of underground coal gasification and tarsands processes. Progress report, February 1, 1982-January 31, 1983

    Energy Technology Data Exchange (ETDEWEB)

    1983-01-01

    Process waters were obtained from trial coal gasification experiments at Hanna, Wyoming and Vernal, Utah. Samples were assayed for toxicity using the Ames test and the Paramecium bioassay. Results indicate that both the Paramecium and Ames bioassays show sporadic genotoxic response to the process waters. (DMC)

  4. Valve development for coal gasification plants. Phase II (Draft). Quarterly technical program report, October--December 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1979-01-01

    This is the tenth in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program. This document discusses engineering progress during the period of October to December 1978. Work performed is discussed briefly. (LTN)

  5. Current Status and Progress of Coal Gasification Technology%煤气化技术的发展现状及研究进展

    Institute of Scientific and Technical Information of China (English)

    陈俊峰

    2012-01-01

    The importance of coal gasification technology was elucidated after the raise of clean coal technology conception based on the energy utilization and environment situation in China.Some typical industrialized coal gasification technologies were reviewed,and the latest progress of coal gasification technology was summarized.Finally,the development orientation and trend of coal gasification technology were presented.%从我国能源利用及环境现状出发,由洁净煤技术概念引出煤气化技术的重要性,介绍了当前典型的商业化运用的煤气化技术,总结了煤气化技术的一些最新研究进展情况,最后展望了未来我国煤气化技术的发展方向及趋势。

  6. Analysis on coal gasification technology and its development trend%浅析煤炭气化技术及发展趋势

    Institute of Scientific and Technical Information of China (English)

    郭冠龙; 滑怀田

    2011-01-01

    主要阐述了煤炭气化技术的基本原理和过程,并对煤炭气化的一些主要工艺方法作了简要的分析说明。同时对该技术的发展趋势以及发展煤炭气化的必要性进行了相关介绍。%This paper described the basic principles and processes of coal gasification technology,analyzed some processes of coal gasification and introduced the necessity and trends of developing coal gasification.

  7. Japan`s New Sunshine Project. 1996 Annual Summary of Coal Liquefaction and Gasification; 1996 nendo new sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gasuka

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-11-01

    In reference to the results of the research and development under the fiscal 1996 New Sunshine Project, a report was summed up on coal liquefaction and coal gasification. As to the R and D of coal liquefaction technology, researches were conducted on liquefaction characteristics and engineering properties by coal kind, catalysts for coal liquefaction, liquefaction reaction of coal and reformation utilization of the liquefied products, liquefaction reaction mechanism and coking mechanism, solubility of coal in solvent and catalytic reaction mechanism, solvent reaction mechanism by hydrogen donor solvent, etc. Concerning the R and D of coal gasification technology, made were the basic study of eco-technology adaptable gasification technology and the study of coal gasification enhancing technology. Further, as to the development of bituminous coal liquefaction technology, carried out were the study in pilot plants and the support study of pilot plants. Additionally, R and D were done of the basic technology of coal liquefaction such as upgrading technology and environmentally acceptable coal liquefaction technology, and of coal hydrogasification technology. 3 refs., 81 figs., 25 tabs.

  8. Reactions of calcium-based sorbents with sulfur in coal during gasification

    Energy Technology Data Exchange (ETDEWEB)

    Rehmat, A.; Abbasian, M.J.; Leppin, D.; Banerjee, D.D.

    1987-01-01

    This status report outlines the results obtained to date of the current research program supported jointly by the Gas Research Institute and the State of Illinois Center for Research on Sulfur in Coal. The overall objective is to obtain data related to the efficient utilization of high-sulfur Illinois coal in a One-Step Desulfurization Process by employing in-situ removal of sulfur using calcium-based sorbents. The project includes a study of fluidization behavior of coal char/sorbent mixtures and the reactions of calcium-based sorbents with sulfur present in the coal during gasification. The tests are conducted in bench-scale units; an 8-inch fluidization column is utilized for fluidization tests, and a thermobalance reactor is used for gas-solid reactions. The test parameters include the choice of sorbent, sorbent size, the effect of temperature on sulfation and sulfidation reactions, the effect of the steam-to-hydrogen sulfide ratio on the sulfidation reaction, the effect of the steam on the sulfation reaction, and the influence of exposure time on sulfation of the presulfided sorbent. The reaction conditions for these reactions have been chosen to be directly applicable to scale-up of the One-Step Desulfurization Process. 7 refs., 9 figs., 11 tabs.

  9. Comparison of steam-gasification characteristics of coal char and petroleum coke char in drop tube furnace

    Institute of Scientific and Technical Information of China (English)

    Lu Ding; Zhijie Zhou; Wei Huo; Guangsuo Yu

    2015-01-01

    The steam-gasification reaction characteristics of coal and petroleum coke (PC) were studied in the drop tube fur-nace (DTF). The effects of various factors such as types of carbonaceous material, gasification temperature (1100–1400 °C) and mass ratio of steam to char (0.4:1, 0.6:1 and 1:1 separately) on gasification gas or solid products were investigated. The results showed that for al carbonaceous materials studied, H2 content exhibited the larg-est part of gasification gaseous products and CH4 had the smal est part. For the two petroleum cokes, CO2 content was higher than CO, which was similar to Zun-yi char. When the steam/char ratio was constant, the carbon con-version of both Shen-fu and PC chars increased with increasing temperature. When the gasification temperature was constant, the carbon conversions of al char samples increased with increasing steam/char ratio. For al the steam/char ratios, compared to water gas shift reaction, char-H2O and char-CO2 reaction were further from the thermodynamic equilibrium due to a much lower char gasification rate than that of water gas shift reaction rate. Therefore, kinetic effects may play a more important role in a char gasification step than thermodynamic ef-fects when the gasification reaction of char was held in DTF. The calculating method for the equilibrium shift in this study wil be a worth reference for analysis of the gaseous components in industrial gasifier. The reactivity of residual cokes decreased and the crystal layer (L002/d002) numbers of residual cokes increased with increasing gasification temperature. Therefore, L002/d002, the carbon crystallite structure parameter, can be used to evaluate the reactivity of residual cokes.

  10. Three-dimensional non-linear numerical analysis on the oxygen concentration field in underground coal gasification

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Lanhe [College of Mineral Resources and Geosciences, China University of Mining and Technology, Xuzhou, Jiangsu Province 221008 (China)

    2004-10-15

    The stability of the process of underground coal gasification and its gas compositions depend on, to a large extent, the features of the convection diffusion of the gas and the dynamical conditions of chemical reactions. The dynamic distribution of the gasification agent concentration, in particular, has a great influence on the combustion and gasification reactions. In this paper, the basic features of convection diffusion for the gas produced in underground coal gasification are studied. On the basis of the model experiment, through the analysis of the distribution and patterns of variation for the fluid concentration field in the process of the combustion and gasification of the coal seams within the gasifier, the 3-D non-linear unstable mathematical models on the convection diffusion for oxygen are established. Additionally, the determination method of the major model parameters is explained. In order to curb such pseudo-physical effects as numerical oscillation and surfeit frequently occurred in the solution of the complex mathematical models, the novel finite unit algorithm-the upstream weighted multi-cell balance method is adopted in this paper to solve the numerical models established. The author also analyzed and discussed the simulated calculation results, which show that, except very few points in loosening zone, where the relative calculation error is comparatively high (>20%) resulting from the low oxygen concentration, the relative calculation error of other points falls between 7% and 17%. Therefore, the calculation value and the experiment value take on a good conformity. According to the simulated results, the calculation value of the oxygen concentration is a little bit lower than the experiment one. On top of that, with the prolonging of gasification time, in high temperature zone, the change gradient of oxygen concentration for experiment value is bigger than that of the calculation value. The oxygen concentration is in direct proportion to its

  11. Analysis of industrial markets for low and medium Btu coal gasification. [Forecasting

    Energy Technology Data Exchange (ETDEWEB)

    1979-07-30

    Low- and medium-Btu gases (LBG and MBG) can be produced from coal with a variety of 13 existing and 25 emerging processes. Historical experience and previous studies indicate a large potential market for LBG and MBG coal gasification in the manufacturing industries for fuel and feedstocks. However, present use in the US is limited, and industry has not been making substantial moves to invest in the technology. Near-term (1979-1985) market activity for LBG and MBG is highly uncertain and is complicated by a myriad of pressures on industry for energy-related investments. To assist in planning its program to accelerate the commercialization of LBG and MBG, the Department of Energy (DOE) contracted with Booz, Allen and Hamilton to characterize and forecast the 1985 industrial market for LBG and MBG coal gasification. The study draws five major conclusions: (1) There is a large technically feasible market potential in industry for commercially available equipment - exceeding 3 quadrillion Btu per year. (2) Early adopters will be principally steel, chemical, and brick companies in described areas. (3) With no additional Federal initiatives, industry commitments to LBG and MBG will increase only moderately. (4) The major barriers to further market penetration are lack of economic advantage, absence of significant operating experience in the US, uncertainty on government environmental policy, and limited credible engineering data for retrofitting industrial plants. (5) Within the context of generally accepted energy supply and price forecasts, selected government action can be a principal factor in accelerating market penetration. Each major conclusion is discussed briefly and key implications for DOE planning are identified.

  12. 煤气化装置运行总结%RUNNING SUMMARY OF COAL-GASIFICATION PLANT

    Institute of Scientific and Technical Information of China (English)

    吴奇洪

    2012-01-01

    To sum up the typical method in managing the raw coal quality in a long-term running of coal-gasification plant and analyze and investigate the problems appeared during the operation and solutions thereof to accumulate the experience based on the summary and perfection and further improve and optimize a safe, long-term and stable running of the coal-gasification plant.%总结煤气化装置长周期运行中原料煤的煤质管理等典型做法,分析和探讨运行过程中出现的问题及解决措施,力求在总结、完善的基础上积累经验,进一步改进和优化煤气化装置的安稳长运行。

  13. Determination of Kinetic Parameters of Coal Pyrolysis to Simulate the Process of Underground Coal Gasification (UCG

    Directory of Open Access Journals (Sweden)

    Beata Urych

    2014-01-01

    Originality/value: The devolatilization of a homogenous lump of coal is a complex issue. Currently, the CFD technique (Computational Fluid Dynamics is commonly used for the multi-dimensional and multiphase phenomena modelling. The mathematical models, describing the kinetics of the decomposition of coal, proposed in the article can, therefore, be an integral part of models based on numerical fluid mechanics.

  14. Comparison of kinetic models for isothermal CO2 gasification of coal char-biomass char blended char

    Science.gov (United States)

    Zuo, Hai-bin; Geng, Wei-wei; Zhang, Jian-liang; Wang, Guang-wei

    2015-04-01

    This study investigated the isothermal gasification reactivity of biomass char (BC) and coal char (CC) blended at mass ratios of 1:3, 1:1, and 3:1 via isothermal thermogravimetric analysis (TGA) at 900, 950, and 1000°C under CO2. With an increase in BC blending ratio, there were an increase in gasification rate and a shortening of gasification time. This could be attributed to the high specific surface area of BC and the high uniformity of carbon structures in CC when compared to those in BC. Three representative gas-solid kinetic models, namely, the volumetric model (VM), grain model (GM), and random pore model (RPM), were applied to describe the reaction behavior of the char. Among them, the RPM model was considered the best model to describe the reactivity of the char gasification reaction. The activation energy of BC and CC isothermal gasification as determined using the RPM model was found to be 126.7 kJ/mol and 210.2 kJ/mol, respectively. The activation energy was minimum (123.1 kJ/mol) for the BC blending ratio of 75%. Synergistic effect manifested at all mass ratios of the blended char, which increased with the gasification temperature.

  15. Japan`s Sunshine Project. 1991 annual summary of coal liquefaction and gasification; 1991 nendo sunshine keikaku seika hokokusho gaiyoshu. Sekitan no ekika gas ka

    Energy Technology Data Exchange (ETDEWEB)

    1992-07-01

    Out of the research and development on the 1991 Sunshine Project, the results of coal liquefaction/gasification are reported. The basic research of coal liquefaction/gasification is conducted. The research plan for a 150 ton/day scale pilot plant (PP) is worked out for the development of bituminous coal liquefaction technology by NEDOL process. Data of PSU (Process Support Units) operation, especially, are studied. Concerning the data obtained through dismantling of the 50 ton/day PP in Australia which uses Australian Victoria coal due to completion of its operation and also obtained from its support research, they are reflected in the design of a demonstration plant, and the results are arranged for study. Research and development on refining technology of coal-derived liquid such as Illinois coal liquid and on application technology of its products are made. For the development of coal-use hydrogen production technology, conducted is the research of a high temperature gasification PP by entrained flow bed process which is the core of the coal gasification technology. Elementary study with a 2 ton/day furnace is made for the development of the entrained flow bed coal gasification combined cycle power generation system. Also conducted are PP construction, adjusting operation and the overall research operation.

  16. Gasification in pulverized coal flames. Second quarterly progress report, October--December 1975. [Contains literature survey on vortex gasifier

    Energy Technology Data Exchange (ETDEWEB)

    Lenzer, R. C.; George, P. E.; Laurendeau, N. M.

    1976-01-01

    This project is concerned with the production of power and synthesis gases from pulverized coal via suspension gasification. A literature review concerning the vortex type gasifier has been completed and a survey concerning the confined jet gasifier is underway. Preliminary design of the vortex gasifier is nearing completion. Test cell and coal handling facilities are in the final stages of design and coal handling equipment has been received. A mass spectrometer has been ordered and a preliminary survey of high-temperature probes is complete.

  17. Combined coal gasification and Fe{sub 3}O{sub 4}-reduction using high-temperature solar process heat

    Energy Technology Data Exchange (ETDEWEB)

    Tamaura, Y. [Tokyo Inst. of Technology, Tokyo (Japan); Ehrensberger, K.; Steinfeld, A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-06-01

    The coal/Fe{sub 3}O{sub 4} system was experimentally studied at PSI solar furnace. The reactants were directly exposed to a solar flux irradiation of 3,000 suns (1 sun = 1 kW/m{sup 2}). The combined gasification of coal and reduction of Fe{sub 2}O{sub 3} proceeded rapidly after only one second exposure, suggesting an efficient heat transfer and chemical conversion by direct solar energy absorption at the reaction site. The proposed solar thermochemical process offers the possibility of converting coal to a cleaner fluid fuel with a solar-upgraded calorific value. (author) 2 figs., 8 refs.

  18. Development of a model of entrained flow coal gasification and study of aerodynamic mechanisms of action on gasifier operation

    Science.gov (United States)

    Abaimov, N. A.; Ryzhkov, A. F.

    2015-11-01

    Problems requiring solution in development of modern highly efficient gasification reactor of a promising high power integrated gasification combined-cycle plant are formulated. The task of creating and testing a numerical model of an entrained-flow reactor for thermochemical conversion of pulverized coal is solved. The basic method of investigation is computational fluid dynamics. The submodel of thermochemical processes, including a single-stage scheme of volatile substances outlet and three heterogeneous reactions of carbon residue conversion (complete carbon oxidation, Boudouard reaction and hydrogasification), is given. The mass loss rate is determined according to the basic assumptions of the diffusion-kinetic theory. The equations applied for calculation of the process of outlet of volatile substances and three stages of fuel gasifi-cation (diffusion of reagent gas toward the surface of the coal particle, heterogeneous reactions of gas with carbon on its surface, and homogeneous reactions beyond the particle surface) are presented. The universal combined submodel Eddy Dissipation/Finite Rate Chemistry with standard (built-in) constants is used for numerical estimates. Aerodynamic mechanisms of action on thermochemical processes of solid fuel gasification are studied, as exemplified by the design upgrade of a cyclone reactor of preliminary thermal fuel preparation. Volume concentrations of combustible gases and products of complete combustion in the syngas before and after primary air and pulverized coal flows' redistribution are given. Volume concentrations of CO in syngas at different positions of tangential secondary air inlet nozzle are compared.

  19. Effects and characterization of an environmentally-friendly, inexpensive composite Iron-Sodium catalyst on coal gasification

    Science.gov (United States)

    Monterroso, Rodolfo

    Coal gasification has been commercially used for more than 60 years in the production of fuels and chemicals. Recently, and due to the lowered environmental impacts and high efficiency derived from integrated gasification combined cycle (IGCC), this process has received increased attention. Furthermore, upcoming strict CO2 emissions regulations by the U.S. Environmental Protection Agency (EPA) will no longer be achievable by traditional means of coal combustion, therefore, growing dependence on different energy sources has drawn attention to clean coal technologies, such as coal-to-liquids processing, and the core of this process is also gasification. Gasification is an energy intensive process that can be substantially improved in terms of efficiency through the use of catalysts. In this study, the effect of the composite catalyst, FeCO3-Na2CO3, on gasification of a low-sulfur sub-bituminous Wyodak coal from the Powder River Basin (PRB) of Wyoming was investigated. The catalytic effects of the composite catalysts were evaluated by comparing their effluent gas compositions and carbon conversion kinetics to those achieved in the presence of either FeCO3 or Na2CO3 catalyst alone or without the presence of any catalyst. All of the evaluation work was conducted in a fixed bed gasifier at atmospheric pressure. Compared to raw coal with no catalyst, the composite catalyst is efficient in increasing the carbon conversion rate constant by as much as two times within the 700-800°C range due to its ability to reduce the activation energy of gasification by about 30-40%. Compared to pure sodium and iron catalysts, the composite catalyst can increase the yields of desired products H2 and CO at 800°C by 15% and 40%, respectively. The composite catalyst can not only synergize the advantages, but also overcome the challenges of pure iron or pure sodium based catalytic coal gasification processes. Moreover, the mechanisms of this particular catalytic coal gasification process

  20. Behaviour of gaseous alkali compounds in coal gasification; Kaasumaisten alkaliyhdisteiden kaeyttaeytyminen kivihiilien kaasutuksessa

    Energy Technology Data Exchange (ETDEWEB)

    Nykaenen, J. [Imatran Voima Oy, Vantaa (Finland)

    1997-10-01

    In this project the behaviour of alkali compounds emitting from CO{sub 2}/O{sub 2}- and airblown gasification are studied. This research project is closely connected to an EU-project coordinated by the Delft University of Technology (DUT). In that project alkali emissions from a 1.6 MW pilot plant will be measured. The results from those measurements will be compared with the calculations performed in this LIEKKI 2 project. The equilibrium calculations show that the major gaseous alkali compounds emitting from combustion and gasification are chlorides and hydroxides. This applies both to air- and CO{sub 2}/O{sub 2}-blown processes. In all the cases studied the concentration of gaseous alkali compounds is determined mainly by the amount of chlorides. The key parameters, with respect to alkali behaviour, are the temperature of the process and chlorine content of the coal. By cooling the gases down to 600 deg C prior to a ceramic filter the alkali concentration can be kept about at 100 ppbv. In combustion, the addition of calcium carbonate increases the amount of gaseous alkali compounds by decreasing the amount of alkali sulphates. In the case of gasification the importance of limestone is negligible. The difference between air- and CO{sub 2}/O{sub 2}-blown processes, in terms of gaseous alkali emissions, is small. This is because CO{sub 2} concentration of the gas does not have a strong impact on alkali chlorides. Furthermore, the effect of CO{sub 2}/O{sub 2}-ratio of the recirculation process is negligible. (orig.)

  1. TEMPERATURE FIELD MODEL OF TWO-STAGE UNDERGROUND COAL GASIFICATION%两阶段煤炭地下气化温度场模型

    Institute of Scientific and Technical Information of China (English)

    杨兰和

    2001-01-01

    Two-stage underground coal gasification is an effective method which can produce water gas with high heating value,while the temperature is the key factor that determines on its producing process. On the basis of model test, the mathematical model for two dimensions, non-linear, unsteady temperature field is established through analyzing the distribution law of temperature field for combustion and gasification of coal seam in the stove, and outlining and treating the boundary conditions. A selection method of the model parameters has been introduced. The mathematical model is solved by the control volume method,and calculation results are analysed. The uniformity of calculation and real measurement value indicate that the numerical simulation of dynamic state temperature field for the coal seam medium in the gasification stove is correct.Thereby,it provides a necessarily theoretical base for further quantitative study on process of underground coal gasification.

  2. Overseas Coal Gasification Equipment Technology and Its Application in China%国外煤气化设备技术及在中国的应用

    Institute of Scientific and Technical Information of China (English)

    钱伯章

    2016-01-01

    对几种煤气化炉炉型进行了技术对比。论述了煤气化技术的选用原则。分析了我国煤气化技术装备需要解决的一些问题。通过实例较详细地介绍了国外煤气化技术在中国的应用。%The technical comparison between different types of the coal gasification furnaces is presented and the selection principal of the coal gasification technology is discussed. Furthermore, the unsolved problems in the coal gasification equipment of Chinese enterprises are analyzed. The applications of the overseas coal gasification technology in China are introduced through case study.

  3. Characterization, leachability and valorization through combustion of residual chars from gasification of coals with pine.

    Science.gov (United States)

    Galhetas, Margarida; Lopes, Helena; Freire, Márcia; Abelha, Pedro; Pinto, Filomena; Gulyurtlu, Ibrahim

    2012-04-01

    This paper presents the study of the combustion of char residues produced during co-gasification of coal with pine with the aim of characterizing them for their potential use for energy. These residues are generally rich in carbon with the presence of other elements, with particular concern for heavy metals and pollutant precursors, depending on the original fuel used. The evaluation of environmental toxicity of the char residues was performed through application of different leaching tests (EN12457-2, US EPA-1311 TCLP and EA NEN 7371:2004). The results showed that the residues present quite low toxicity for some of pollutants. However, depending on the fuel used, possible presence of other pollutants may bring environmental risks. The utilization of these char residues for energy was in this study evaluated, by burning them as a first step pre-treatment prior to landfilling. The thermo-gravimetric analysis and ash fusibility studies revealed an adequate thermochemical behavior, without presenting any major operational risks. Fluidized bed combustion was applied to char residues. Above 700°C, very high carbon conversion ratios were obtained and it seemed that the thermal oxidation of char residues was easier than that of the coals. It was found that the char tendency for releasing SO(2) during its oxidation was lower than for the parent coal, while for NO(X) emissions, the trend was observed to increase NO(X) formation. However, for both pollutants the same control techniques might be applied during char combustion, as for coal. Furthermore, the leachability of ashes resulting from the combustion of char residues appeared to be lower than those produced from direct coal combustion.

  4. Producing fired bricks using coal slag from a gasification plant in indiana

    Science.gov (United States)

    Chen, L.-M.; Chou, I.-Ming; Chou, S.-F.J.; Stucki, J.W.

    2009-01-01

    Integrated gasification combined cycle (IGCC) is a promising power generation technology which increases the efficiency of coal-to-power conversion and enhances carbon dioxide concentration in exhaust emissions for better greenhouse gas capture. Two major byproducts from IGCC plants are bottom slag and sulfur. The sulfur can be processed into commercially viable products, but high value applications need to be developed for the slag material in order to improve economics of the process. The purpose of this study was to evaluate the technical feasibility of incorporating coal slag generated by the Wabash River IGCC plant in Indiana as a raw material for the production of fired bricks. Full-size bricks containing up to 20 wt% of the coal slag were successfully produced at a bench-scale facility. These bricks have color and texture similar to those of regular fired bricks and their water absorption properties met the ASTM specifications for a severe weathering grade. Other engineering properties tests, including compressive strength tests, are in progress.

  5. Lawrence Livermore National Laboratory underground coal gasification data base. [US DOE-supported field tests; data

    Energy Technology Data Exchange (ETDEWEB)

    Cena, R. J.; Thorsness, C. B.

    1981-08-21

    The Department of Energy has sponsored a number of field projects to determine the feasibility of converting the nation's vast coal reserves into a clean efficient energy source via underground coal gasification (UCG). Due to these tests, a significant data base of process information has developed covering a range of coal seams (flat subbituminous, deep flat bituminous and steeply dipping subbituminous) and processing techniques. A summary of all DOE-sponsored tests to data is shown. The development of UCG on a commercial scale requires involvement from both the public and private sectors. However, without detailed process information, accurate assessments of the commercial viability of UCG cannot be determined. To help overcome this problem the DOE has directed the Lawrence Livermore National Laboratory (LLNL) to develop a UCG data base containing raw and reduced process data from all DOE-sponsored field tests. It is our intent to make the data base available upon request to interested parties, to help them assess the true potential of UCG.

  6. Thermal expansion of slag and fly ash from coal gasification in IGCC power plant

    Energy Technology Data Exchange (ETDEWEB)

    M. Aineto; A. Acosta; J.M.A. Rincon; M. Romero [University of Castilla La Mancha, Ciudad Real (Spain). Laboratory of Applied Mineralogy

    2006-11-15

    Integrated gasification in combined cycle (IGCC) is an electrical power generation system which is characterized to be a clean coal technology different than conventional process in combustible treatment. IGCC process gives rise to inorganic solid wastes in the form of vitreous slag and fly ashes with singular thermal properties. The gasification of the fuel takes place at high temperature and pressure in reducing atmosphere. Under that conditions, gases such as H{sub 2}, N{sub 2} or CO, which are the main components of the gas mixture in the gasifier, show a high solubility in the melt and during the cooling remain enclosed in the vitreous slag. When these wastes are afterward thermal treated in oxidizing conditions, two phenomena occur. The development of a crystalline phase by devitrification of the glassy matrix and the releasing of the enclosed gas, which starts at temperatures nearly to the softening point. At higher temperatures the bubbles with increasing kinetic energy tend to ascend with difficulty through the viscous liquid phase and promotes an expansive reaction, giving rise to a foam glass-ceramic product. This paper has been focused on the study of thermal expansion in slag and fly ash samples from the ELCOGAS IGCC power plant located in Puertollano (Spain). 18 refs., 11 figs., 1 tab.

  7. FUNDAMENTAL INVESTIGATION OF FUEL TRANSFORMATIONS IN PULVERIZED COAL COMBUSTION AND GASIFICATION TECHNOLOGIES

    Energy Technology Data Exchange (ETDEWEB)

    Robert Hurt; Joseph Calo; Thomas H. Fletcher; Alan Sayre

    2005-04-29

    The goal of this project was to carry out the necessary experiments and analyses to extend current capabilities for modeling fuel transformations to the new conditions anticipated in next-generation coal-based, fuel-flexible combustion and gasification processes. This multi-organization, multi-investigator project has produced data, correlations, and submodels that extend present capabilities in pressure, temperature, and fuel type. The combined experimental and theoretical/computational results are documented in detail in Chapters 1-8 of this report, with Chapter 9 serving as a brief summary of the main conclusions. Chapters 1-3 deal with the effect of elevated pressure on devolatilization, char formation, and char properties. Chapters 4 and 5 deal with advanced combustion kinetic models needed to cover the extended ranges of pressure and temperature expected in next-generation furnaces. Chapter 6 deals with the extension of kinetic data to a variety of alternative solid fuels. Chapter 7 focuses on the kinetics of gasification (rather than combustion) at elevated pressure. Finally, Chapter 8 describes the integration, testing, and use of new fuel transformation submodels into a comprehensive CFD framework. Overall, the effects of elevated pressure, temperature, heating rate, and alternative fuel use are all complex and much more work could be further undertaken in this area. Nevertheless, the current project with its new data, correlations, and computer models provides a much improved basis for model-based design of next generation systems operating under these new conditions.

  8. Application of response surface methodology to assess the combined effect of operating variables on high-pressure coal gasification for H2-rich gas production

    OpenAIRE

    Fermoso Domínguez, Javier; Gil Matellanes, María Victoria; Arias Rozada, Borja; González Plaza, Marta; Pevida García, Covadonga; Pis Martínez, José Juan; Rubiera González, Fernando

    2010-01-01

    Coal gasification was performed by means of a high-pressure fixed bed gasifier fitted with a solids feeding system in continuous mode, using oxygen and steam as gasifying agents. The main aim of the paper was to assess the combined effects of the operating variables (temperature, oxygen and steam concentrations) on high-pressure coal gasification. To this end a face centered central composite design (FCCCD) based on response surface methodology (RSM) was used. The response variables studied w...

  9. Removal of phenols, thiocyanate and ammonium from coal gasification wastewater using moving bed biofilm reactor

    Energy Technology Data Exchange (ETDEWEB)

    Li, H.Q.; Han, H.J.; Du, M.A.; Wang, W. [Harbin Institute of Technology, Harbin (China)

    2011-04-15

    A laboratory-scale moving bed biofilm reactor (MBBR) with a volume of 4 L was used to study the biodegradation of coal gasification wastewater. Maximum removal efficiencies of 81%, 89%, 94% and 93% were obtained for COD, phenols, SCN{sup -} and NH{sub 4}{sup +}-N, respectively. NO{sub 2}{sup -}-N accumulation induced increase of effluent COD concentration when the hydraulic residence time (HRT) decreased. Phenols removal was not affected when the HRT decreased from 48 to 32 h. Effluent SCN{sup -} and NH{sub 4}{sup +}-N concentration increased with the decrease of the HRT, and decreased gradually when the HRT returned to 48 h. Batch experiments were carried out to study performance of the suspended and attached growth biomass in the MBBR.

  10. Some studies on a solid state sulfur probe for coal gasification systems

    Science.gov (United States)

    Jacob, K. T.; Rao, D. B.; Nelson, H. G.

    1977-01-01

    Measurements on the solid electrolyte cell (Ar + H(2) + H(2)S/CaS + CaF(2) + (Pt)//CaF(2)//(Pt) + CaF(2) + CaS/H(2) + H(2)+Ar) show that the emf of the cell is directly related to the difference in sulfur potentials established at the Ar + H(2) + H(2)S/electrode interfaces. The electrodes convert the sulfur potential gradient across the calcium fluoride electrolyte into an equivalent fluorine potential gradient. Response time of the probe varies from approximately 9 hr at 990 K to 2.5 hr at 1225 K. The conversion of calcium sulfide and/or calcium fluoride into calcium oxide is not a problem anticipated in commercial coal gasification systems. Suggestions are presented for improving the cell for such commercial applications.

  11. Treatment of coal gasification wastewater by membrane bioreactor hybrid powdered activated carbon (MBR–PAC) system.

    Science.gov (United States)

    Jia, Shengyong; Han, Hongjun; Hou, Baolin; Zhuang, Haifeng; Fang, Fang; Zhao, Qian

    2014-12-01

    A laboratory-scale membrane bioreactor hybrid powdered activated carbon (MBR–PAC) system was developed to treat coal gasification wastewater to enhance the COD, total phenols (TPh), NH4+ removals and migrate the membrane fouling. Since the MBR–PAC system operated with PAC dosage of 4 g L−1, the maximum removal efficiencies of COD, TPh and NH4+ reached 93%, 99% and 63%, respectively with the corresponding influent concentrations of 2.27 g L−1, 497 mg L−1 and 164 mg N L−1; the PAC extraction efficiencies of COD, TPh and NH4+ were 6%, 3% and 13%, respectively; the transmembrane pressure decreased 34% with PAC after 50 d operation. The results demonstrate that PAC played a key role in the enhancement of biodegradability and mitigation of membrane fouling.

  12. Inhibition and recovery of nitrification in treating real coal gasification wastewater with moving bed biofilm reactor

    Institute of Scientific and Technical Information of China (English)

    Huiqiang Li; Hongjun Han; Maoan Du; Wei Wang

    2011-01-01

    Moving bed biofilm reactor (MBBR) was used to treat real coal gasification wastewater.Nitrification of the MBBR was inhibited almost completely during start-up period.Sudden increase of influent total NH3 concentration was the main factor inducing nitrification inhibition.Increasing DO concentration in the bulk liquid (from 2 to 3 mg/L) had little effect on nitrification recovery.Nitrification of the MBBR recovered partially by the addition of nitrifying sludge into the reactor and almost ceased within 5 days.Nitrification ratio of the MBBR achieved 65% within 12 days by increasing dilute ratio of the influent wastewater with tap water.The ratio of nitrification decreased to 25% when infiuent COD concentration increased from 650 to 1000 mg/L after nitrification recovery and recovered 70%for another 4 days.

  13. Chronic studies in rats exposed to liquid effluent from coal gasification process.

    Science.gov (United States)

    Kostial, K; Blanusa, M; Rabar, I; Maljković, T; Kello, D; Landeka, M; Bunarević, A; Stara, J F

    1981-02-01

    The health effects of the E-effluent (water for quenching ash) from a coal gasification plant were assayed in a chronic experiment (16 month exposure) and a three generation reproduction study. Animals exposed to 100% E-effluent had an increased daily intake of various inorganic elements (Fe, Cu, K, I, Se, Cd, Hg, Pb, As, F and Cr). In spite of that, the exposed and control animals had the same mortality rate, haematological findings, urinary protein excretion, trace element concentrations in kidneys, liver and femur, bone composition and morphometry, and histological findings. The pre- and post-natal development and growth was unchanged during three generations. It is concluded that the higher intake of various inorganics caused no change in the parameters measured.

  14. Removal of phenols, thiocyanate and ammonium from coal gasification wastewater using moving bed biofilm reactor.

    Science.gov (United States)

    Li, Hui-qiang; Han, Hong-jun; Du, Mao-an; Wang, Wei

    2011-04-01

    A laboratory-scale moving bed biofilm reactor (MBBR) with a volume of 4 L was used to study the biodegradation of coal gasification wastewater. Maximum removal efficiencies of 81%, 89%, 94% and 93% were obtained for COD, phenols, SCN(-) and NH(4)(+)-N, respectively. NO(2)(-)-N accumulation induced increase of effluent COD concentration when the hydraulic residence time (HRT) decreased. Phenols removal was not affected when the HRT decreased from 48 to 32 h. Effluent SCN(-) and NH(4)(+)-N concentration increased with the decrease of the HRT, and decreased gradually when the HRT returned to 48 h. Batch experiments were carried out to study performance of the suspended and attached growth biomass in the MBBR.

  15. Inhibition and recovery of nitrification in treating real coal gasification wastewater with moving bed biofilm reactor.

    Science.gov (United States)

    Li, Huiqiang; Han, Hongjun; Du, Maoan; Wang, Wei

    2011-01-01

    Moving bed biofilm reactor (MBBR) was used to treat real coal gasification wastewater. Nitrification of the MBBR was inhibited almost completely during start-up period. Sudden increase of influent total NH3 concentration was the main factor inducing nitrification inhibition. Increasing DO concentration in the bulk liquid (from 2 to 3 mg/L) had little effect on nitrification recovery. Nitrification of the MBBR recovered partially by the addition of nitrifying sludge into the reactor and almost ceased within 5 days. Nitrification ratio of the MBBR achieved 65% within 12 days by increasing dilute ratio of the influent wastewater with tap water. The ratio of nitrification decreased to 25% when influent COD concentration increased from 650 to 1000 mg/L after nitrification recovery and recovered 70% for another 4 days.

  16. A study of toxic emissions from a coal-fired gasification plant

    Energy Technology Data Exchange (ETDEWEB)

    Williams, A.; Behrens, G. [Radian Corporation, Austin, TX (United States)

    1995-11-01

    Toxic emissions were measured in the gaseous, solid and aqueous effluent streams in a coal-fired gasification plant. Several internal process streams were also characterized to assess pollution control device effectiveness. The program, consisted of three major phases. Phase I was the toxics emission characterization program described above. phase II included the design, construction and shakedown testing of a high-temperature, high-pressure probe for collecting representative trace composition analysis of hot (1200{degrees}F) syngas. Phase III consisted of the collection of hot syngas samples utilizing the high-temperature probe. Preliminary results are presented which show the emission factors and removal efficiencies for several metals that are on the list of compounds defined by the Clean Air Act Amendments of 1990.

  17. Degradation of Phenolic Compounds in Coal Gasification Wastewater by Biofilm Reactor with Isolated Klebsiella sp

    Institute of Scientific and Technical Information of China (English)

    Fang Fang; HongJun Han; ChunYan Xu; Qian Zhao; LingHan Zhang

    2014-01-01

    This study was conducted to evaluate the degradation of phenolic compounds by one strain isolated from coal gasification wastewater ( CGW ) . 16S rRNA gene sequences homology and phylogenetic analysis showed that the isolate is belonged to the genus Klebsiella sp. The effect of different phenolic compounds on the isolate was investigated by determining OD600 and phenoloxidase activity, of which the results showed that the isolate can utilize phenol, 4-methyl phenol, 3, 5-dimethyl phenol and resorcinol as carbon resources. The biofilm reactor ( formed by the isolate) can resist the influent concentration of phenolic compounds as high as 750 mg/L when fed with synthetic CGW and incubated at optimum conditions. The capacity of improving the biodegradability of CGW through degrading phenolic compounds was testified with fed the biofilm reactor with real CGW. Thus, it might be an effective strain for bioaugmentation of CGW treatment.

  18. Transformation of chlorine in NaCl-loaded Victorian brown coal during the gasification in steam

    Institute of Scientific and Technical Information of China (English)

    ZHANG Shu; Mohammad Asadullah; Rosalie Hocking; LIN Jian-ying; LI Chun-zhu

    2012-01-01

    This study is to examine the changes in Cl volatilizations and chemical forms in NaCl-loaded Victorian brown coal during gasification in steam at 800 ℃ using Cl K-edge X-ray absorption near-edge structure (XANES) spectroscopy.The char samples were prepared in a novel one-stage fluidised-bed/fixed-bed quartz reactor at a fast heating rate.The samples were then collected and sealed in an argon-filled bag in order to minimise possible oxidation of char and Cl by air prior to analysis by XANES.Char-steam reactions were found to significantly affect the transformation of Cl,including the possible formation of chlorine-containing organic structures.On the other hand,volatile-char interactions during the gasificauon appeared to enhance the Cl retention and prevent the formation of organic chlorine compounds in chars.

  19. Environmental assessment for the Hoe Creek underground, Coal Gasification Test Site Remediation, Campbell County, Wyoming

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-10-01

    The U.S. Department of Energy (DOE) has prepared this EA to assess environmental and human health Issues and to determine potential impacts associated with the proposed Hoe Creek Underground Coal Gasification Test Site Remediation that would be performed at the Hoe Creek site in Campbell County, Wyoming. The Hoe Creek site is located south-southwest of the town of Gillette, Wyoming, and encompasses 71 acres of public land under the stewardship of the Bureau of Land Management. The proposed action identified in the EA is for the DOE to perform air sparging with bioremediation at the Hoe Creek site to remove contaminants resulting from underground coal gasification (UCG) experiments performed there by the DOE in the late 1970s. The proposed action would involve drilling additional wells at two of the UCG test sites to apply oxygen or hydrogen peroxide to the subsurface to volatilize benzene dissolved in the groundwater and enhance bioremediation of non-aqueous phase liquids present in the subsurface. Other alternatives considered are site excavation to remove contaminants, continuation of the annual pump and treat actions that have been used at the site over the last ten years to limit contaminant migration, and the no action alternative. Issues examined in detail in the EA are air quality, geology, human health and safety, noise, soils, solid and hazardous waste, threatened and endangered species, vegetation, water resources, and wildlife. Details of mitigative measures that could be used to limit any detrimental effects resulting from the proposed action or any of the alternatives are discussed, and information on anticipated effects identified by other government agencies is provided.

  20. Mechanism of coal gasification in a steam medium under arc plasma conditions

    Science.gov (United States)

    He, Xiaojun; Ma, Tengcai; Qiu, Jieshan; Sun, Tianjun; Zhao, Zongbin; Zhou, Ying; Zhang, Jialiang

    2004-08-01

    The coal gasification mechanism in a steam medium under arc plasma conditions was investigated at atmospheric pressure in a tube-type setup. The gases obtained were analysed by gas chromatography. The active species in the plasma were monitored and analysed in situ by optical emission spectroscopy (OES). The effects of operating parameters such as the current in the electromagnetic coil and the flow rate of carrier gas (air) on the gas yields as well as on the emission intensities of the active species were studied. The quantitative emission intensities of the active species are correlated with the yields of main components in the gas products. The results show that as the current in the electromagnetic coil increases, the yields of H2, CO, CO2 and O2 as well as the peak intensities of C atom, H atom, CH radical and CO+ ion detected by OES pass through a maximum. It is also found that as the flow rate of carrier gas (air) increases, the yields of CO, CO2 and O2 increase; at the same time, the yield of H2 and the peak intensities of C atoms, H atoms, CH radicals and OH radicals decrease. The presence of C atoms or H atoms in the reaction system favours the formation of H2, which is evidenced by the fact that the yield of H2 increases as the optical emission intensity of C atom or H atom species increases. Based on the experimental results, a possible mechanism of coal gasification in steam medium under plasma conditions is proposed and discussed.

  1. Mechanism of coal gasification in a steam medium under arc plasma conditions

    Energy Technology Data Exchange (ETDEWEB)

    He, X.J.; Ma, T.C.; Qiu, J.S.; Sun, T.J.; Zhao, Z.B.; Zhou, Y.; Zhang, J.L. [Dalian University of Technology, Dalian (China). Carbon Research Laboratory, Center for Nano Materials and Science

    2004-08-01

    The coal gasification mechanism in a steam medium under arc plasma conditions was investigated at atmospheric pressure in a tube-type setup. The gases obtained were analysed by gas chromatography. The active species in the plasma were monitored and analysed in situ by optical emission spectroscopy (OES). The effects of operating parameters such as the current in the electromagnetic coil and the flow rate of carrier gas (air) on the gas yields as well as on the emission intensities of the active species were studied. The quantitative emission intensities of the active species are correlated with the yields of main components in the gas products. The results show that as the current in the electromagnetic coil increases, the yields of H{sub 2}, CO, CO{sub 2} and O{sub 2} as well as the peak intensities of C atom, H atom, CH radical and CO{sup +} ion detected by OES pass through a maximum. It is also found that as the flow rate of carrier gas (air) increases, the yields of CO, CO{sub 2} and O{sub 2} increase; at the same time, the yield of H{sub 2} and the peak intensities of C atoms, H atoms, CH radicals and OH radicals decrease. The presence of C atoms or H atoms in the reaction system favours the formation of H{sub 2}, which is evidenced by the fact that the yield of H{sub 2} increases as the optical emission intensity of C atom or H atom species increases. Based on the experimental results, a possible mechanism of coal gasification in steam medium under plasma conditions is proposed and discussed.

  2. Stabilization of spent sorbents from coal gasification. Final technical report, September 1, 1992--August 31, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Hill, A.H.; Rue, D.M.; Wangerow, J.R. [Institute of Gas Technology, Chicago, IL (United States)

    1993-12-31

    The objective of this investigation was to determine the rates of reactions involving partially sulfided dolomite and oxygen, which is needed for the design of the reactor system for the stabilization of sulfide-containing solid wastes from gasification of high sulfur coals. To achieve this objective, samples of partially sulfided dolomite were reacted with oxygen at a variety of operating conditions in a fluidized-bed reactor. The effect of external diffusion was eliminated by using small quantities of the sorbent and maintaining a high flow rate of the reactant gas. The reacted sorbents were analyzed to determine the extent of conversion as a function of operating variables including sorbent particle size, reaction temperature and pressure, and oxygen concentration. The results of sulfation tests indicate that the rate of reaction increases with increasing temperature, increasing oxygen partial pressure, and decreasing sorbent particle size. The rate of the sulfation reaction can be described by a diffuse interface model where both chemical reaction and intraparticle diffusion control the reaction rate. The kinetic model of the sulfation reaction was used to determine the requirements for the reactor system, i.e., reactor size and operating conditions, for successful stabilization of sulfide-containing solid wastes from gasification of high sulfur coals (with in-bed desulfurization using calcium based sorbents). The results indicate that the rate of reaction is fast enough to allow essentially complete sulfation in reactors with acceptable dimensions. The optimum sulfation temperature appears to be around 800{degrees}C for high pressure as well as atmospheric stabilization of the spent sorbents.

  3. Technological Analysis on Choren High-Pressure Pulverized Coal Gasification Process%科林高压干粉煤气化工艺技术分析

    Institute of Scientific and Technical Information of China (English)

    赵小倩; 胡长胜

    2011-01-01

    The process and features of Choren high-pressure pulveried coal gasification are presented. Operability of the gasification technology is analysed. And the operation data as compared with the other two coal gasification processes, i.e. pulverized coal gasification process with waste heat boiler and coal-water slurry pressure gasification process, using in China are described briefly. Choren high-pressure pulverized coal gasification process is featured with simple in equipment structure, wider applicability of coal variety, lower consumption and high localization of equipment.%介绍了科林高压干粉煤气化的工艺流程、工艺特点.对该气化技术的可操作性进行了分析,并与国内应用的2种煤气化工艺(干粉煤废锅气化工艺和水煤浆加压气化工艺)数据进行了简单对比.科林高压干粉煤气化工艺具有设备结构简单、煤种适用性更宽、消耗低和设备国产化程度高的特点.

  4. Prediction and measurement of entrained flow coal gasification processes. Interim report, September 8, 1981-September 7, 1983

    Energy Technology Data Exchange (ETDEWEB)

    Hedman, P.O.; Smoot, L.D.; Fletcher, T.H.; Smith, P.J.; Blackham, A.U.

    1984-01-31

    This volume reports interim experimental and theoretical results of the first two years of a three year study of entrained coal gasification with steam and oxygen. The gasifier facility and testing methods were revised and improved. The gasifier was also modified for high pressure operation. Six successful check-out tests at elevated pressure were performed (55, 75, 100, 130, 170, and 215 psig), and 8 successful mapping tests were performed with the Utah bituminous coal at an elevated pressure of 137.5 psig. Also, mapping tests were performed at atmospheric pressure with a Utah bituminous coal (9 tests) and with a Wyoming subbituminous coal (14 tests). The LDV system was used on the cold-flow facility to make additional nonreactive jets mixing measurements (local mean and turbulent velocity) that could be used to help validate the two-dimensional code. The previously completed two-dimensional entrained coal gasification code, PCGC-2, was evaluated through rigorous comparison with cold-flow, pulverized coal combustion, and entrained coal gasification data. Data from this laboratory were primarily used but data from other laboratories were used when available. A complete set of the data used has been compiled into a Data Book which is included as a supplemental volume of this interim report. A revised user's manual for the two-dimensional code has been prepared and is also included as a part of this interim report. Three technical papers based on the results of this study were published or prepared. 107 references, 57 figures, 35 tables.

  5. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Jordi Perez-Mariano; Angel Sanjurjo

    2006-06-30

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this period, we analyzed several coated and exposed samples of 409 steel by scanning electron microscopy (SEM) and energy-dispersive X-ray (EDX). We report here on findings of this analysis: (1) A SS409 coupon that was coated with multilayered combined nitrides of Ti, Al, and Si showed adherent coatings on the surface; (2) A similarly coated coupon, after exposure to simulated coal gas at 900 C for 300 h, revealed that the coating has cracked during the exposure; (3) An SS409 coupon that was coated with nitrides of Ti and Si with a barrier layer of tungsten in between to improve the adhesion of the coating and to prevent outward diffusion of iron to the surface. (4) A porous coupon was coated with nitrides of Ti and Al and examination of the coupon revealed deposition of Ti at the interior surfaces. A similarly prepared coupon was exposed to simulated coal gas at 370 C for 300 h, and it showed no corrosion.

  6. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Jordi Perez-Mariano; Angel Sanjurjo

    2007-03-31

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the hightemperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this period, we analyzed several 409 low alloy steel samples after coating them in our fluidized bed reactor and also after exposing them to our corrosion test. We report the following findings: 1. A protective coating was deposited inside a porous 409 steel sample to protect it from sulfidation attack. The coating was based on a combination of Si diffusion layer, Nb interlayer and nitrides of titanium and silicon. 2. Analysis of solid coupons exposed to simulated coal gas at 900 C for 300 h showed that multilayer metal/ceramic coatings provide a better protection than ceramic coatings. 3. Deposition of several ceramic/metal multilayer coatings showed that coatings with niobium and tantalum interlayers have good adhesion. However, coatings with a tungsten interlayer suffered localized delaminating and coatings with Zr interlayers showed poor adhesion. 4. Analysis of solid coupons, coated with the above-mentioned multilayer films, after exposure to simulated coal gas at 900 C for 300 h showed that niobium is the best candidate for interlayer material.

  7. 煤加氢气化技术研究进展%Progress of Researching Technology of Coal and Hydro-gasification

    Institute of Scientific and Technical Information of China (English)

    袁申富; 曲旋; 张荣; 毕继诚

    2012-01-01

    阐述了煤加氢气化生产替代天然气(SNG)的优势,分析了国内外几种先进的煤加氢气化技术,并详细介绍了气流床煤加氢气化的研究进展。%The authors expounded advantages of substitution natural gas through technology of coal and hydro-gasification. Then, the authors analyzed some advanced technologies of coal and hydro-gasification at home and abroad, and introduced progress of hydro-gasification of entrained flow.

  8. Wabash River Coal Gasification Combined Cycle Repowering Project: Clean Coal Technology Program. Environmental Assessment

    Energy Technology Data Exchange (ETDEWEB)

    1993-05-01

    The proposed project would result in a combined-cycle power plant with lower emissions and higher efficiency than most existing coal-fired power plants of comparable size. The net plant heat rate (energy content of the fuel input per useable electrical generation output; i.e., Btu/kilowatt hour) for the new repowered unit would be a 21% improvement over the existing unit, while reducing SO{sub 2} emissions by greater than 90% and limiting NO{sub x} emissions by greater than 85% over that produced by conventional coal-fired boilers. The technology, which relies on gasified coal, is capable of producing as much as 25% more electricity from a given amount of coal than today`s conventional coal-burning methods. Besides having the positive environmental benefit of producing less pollutants per unit of power generated, the higher overall efficiency of the proposed CGCC project encourages greater utilization to meet base load requirements in order to realize the associated economic benefits. This greater utilization (i.e., increased capacity factor) of a cleaner operating plant has global environmental benefits in that it is likely that such power would replace power currently being produced by less efficient plants emitting a greater volume of pollutants per unit of power generated.

  9. Forming the Composition of Underground Coal Gasification Products in the Simulation of Various Heat and Mass Transfer Conditions in the Coal Seam

    Directory of Open Access Journals (Sweden)

    Masanik A.S.

    2016-01-01

    Full Text Available The mathematical model describing the heat and mass transfer processes in underground coal gasification is proposed. Numerical studies have allowed to determine the composition of gases depending on the temperature, pressure products of gasification, and the composition of the heated oxidant injected. Relations the composition of the concentration of combustible gas component of the oxidant injected: dry air, a mixture of oxygen, nitrogen and water vapor in different proportions were prepared. It is found that, depending on the oxygen content in the oxidizer low-temperature gasification mode is implemented (up to 15%. At higher values of the oxygen concentration in the oxidizer the high-temperature mode is realized, in which the fuel gas output increases significantly.

  10. Chemical process modelling of Underground Coal Gasification (UCG) and evaluation of produced gas quality for end use

    Science.gov (United States)

    Korre, Anna; Andrianopoulos, Nondas; Durucan, Sevket

    2015-04-01

    Underground Coal Gasification (UCG) is an unconventional method for recovering energy from coal resources through in-situ thermo-chemical conversion to gas. In the core of the UCG lays the coal gasification process which involves the engineered injection of a blend of gasification agents into the coal resource and propagating its gasification. Athough UCG technology has been known for some time and considered a promising method for unconventional fossil fuel resources exploitation, there are limited modelling studies which achieve the necessary accuracy and realistic simulation of the processes involved. This paper uses the existing knowledge for surface gasifiers and investigates process designs which could be adapted to model UCG. Steady state simulations of syngas production were developed using the Advanced System for Process ENgineering (Aspen) Plus software. The Gibbs free energy minimisation method was used to simulate the different chemical reactor blocks which were combined using a FORTRAN code written. This approach facilitated the realistic simulation of the gasification process. A number of model configurations were developed to simulate different subsurface gasifier layouts considered for the exploitation of underground coal seams. The two gasifier layouts considered here are the linked vertical boreholes and the controlled retractable injection point (CRIP) methods. Different stages of the UCG process (i.e. initialisation, intermediate, end-phase) as well as the temperature level of the syngas collection point in each layout were found to be the two most decisive and distinctive parameters during the design of the optimal model configuration for each layout. Sensitivity analyses were conducted to investigate the significance of the operational parameters and the performance indicators used to evaluate the results. The operational parameters considered were the type of reagents injected (i.e. O2, N2, CO2, H2O), the ratio between the injected reagents

  11. Effect of Injection Flow Rate on Product Gas Quality in Underground Coal Gasification (UCG Based on Laboratory Scale Experiment: Development of Co-Axial UCG System

    Directory of Open Access Journals (Sweden)

    Akihiro Hamanaka

    2017-02-01

    Full Text Available Underground coal gasification (UCG is a technique to recover coal energy without mining by converting coal into a valuable gas. Model UCG experiments on a laboratory scale were carried out under a low flow rate (6~12 L/min and a high flow rate (15~30 L/min with a constant oxygen concentration. During the experiments, the coal temperature was higher and the fracturing events were more active under the high flow rate. Additionally, the gasification efficiency, which means the conversion efficiency of the gasified coal to the product gas, was 71.22% in the low flow rate and 82.42% in the high flow rate. These results suggest that the energy recovery rate with the UCG process can be improved by the increase of the reaction temperature and the promotion of the gasification area.

  12. 壳牌干煤粉气化技术与壳牌下行水激冷流程气化技术的比较%Comparison of Shell Coal Gasification Technology with Shell Coal Gasification Process Bottom Quench

    Institute of Scientific and Technical Information of China (English)

    胡庆丽; 赖智乐; 王盘峰; 胡步千

    2014-01-01

    Afterwards entering the Chinese market of Shell coal gasification technology, Shell Company has again developed the bottom water quench process gasification technology in order to simplify traditional process, to eliminate stoppage problem of dried ash, and to decrease the investment cost. Author has made comparison for 2 kinds of gasification technologies from aspects of process feature, gasifier structure, equipment arrangement, investment cost and so on, has separately indicated the advantage and shortage between Shell dried and pulverized coal gasification technology and the bottom water quench process gasification technology, result indicates that:①The traditional Shell dried and pulverized coal gasification process technology is ripe and reliable with high heat recovery rate, better economy and environmental protection, but with more investment cost at present stage, more equipment in plant, more difficulty in construction/installation and in piping arrangement;②The structure of gasifier is simple forbottom water quench process gasifica-tion technology newly developed with less equipment in plant, less investment of project, but only one set of plant is now put into operation, so its environ-ment protection property and stability of plant are required to be observed.%继壳牌干煤粉气化技术( SCGP)进入中国市场后,壳牌公司又开发了下行水激冷流程气化技术( SCGP Bot-tom Quench),以简化传统流程,消除干灰堵塞问题,降低投资成本。本文从工艺特点、气化炉结构、设备布置以及投资成本等方面进行了2种气化技术的比较,分别指出了SCGP和SCGP Bottom Quench的优势和劣势,结果表明:①传统的SCGP工艺技术成熟可靠,热回收率高,经济环保,但项目前期投资较大,装置设备较多,施工吊装与管道布置难度较大;②新开发的SCGP Bottom Quench气化炉结构简单,装置设备减少,项目投资缩减,但国内仅有1套装

  13. LWA demonstration applications using Illinois coal gasification slag: Phase II. Technical report, 1 March--31 May 1994

    Energy Technology Data Exchange (ETDEWEB)

    Choudhry, V. [Praxis Engineers, Inc., Milpitas, CA (United States); Steck, P. [Harvey Cement Products, Inc. (United States)

    1994-09-01

    The major objective of this project is to demonstrate the suitability of using ultra-lightweight aggregates (ULWA) produced by thermal expansion of solid residues (slag) generated during the gasification of Illinois coals as substitutes for conventional aggregates, which are typically produced by pyroprocessing of perlite ores. To meet this objective, expanded slag aggregates produced from an Illinois coal slag feed in Phase I will be subjected to characterization and applications-oriented testing. Target applications include the following: aggregates in precast products (blocks and rooftiles); construction aggregates (loose fill insulation and insulating concrete); and other applications as identified from evaluation of expanded slag properties. The production of value-added products from slag is aimed at eliminating a solid waste and possibly enhancing the overall economics of the gasification process, especially when the avoided costs of disposal are taken into consideration.

  14. IGDS/TRAP Interface Program (ITIP). Software User Manual (SUM). [network flow diagrams for coal gasification studies

    Science.gov (United States)

    Jefferys, S.; Johnson, W.; Lewis, R.; Rich, R.

    1981-01-01

    This specification establishes the requirements, concepts, and preliminary design for a set of software known as the IGDS/TRAP Interface Program (ITIP). This software provides the capability to develop at an Interactive Graphics Design System (IGDS) design station process flow diagrams for use by the NASA Coal Gasification Task Team. In addition, ITIP will use the Data Management and Retrieval System (DMRS) to maintain a data base from which a properly formatted input file to the Time-Line and Resources Analysis Program (TRAP) can be extracted. This set of software will reside on the PDP-11/70 and will become the primary interface between the Coal Gasification Task Team and IGDS, DMRS, and TRAP. The user manual for the computer program is presented.

  15. SOTACARBO R&D project for hydrogen and clean fuels production from coal gasification and CO{sub 2} removal

    Energy Technology Data Exchange (ETDEWEB)

    Carlo Amorino; Enrico Maggio, Alessandro Orsini; Francesco Repetto; Maria Luisa Pelizza; Federica Pratola; Giuseppe Girardi; Antonio Calabro; Giorgio Cau; Daniele Cocco [Sotacarbo SpA - Centro servizi Consorzio NISI, Portoscuso (Italy)

    2005-07-01

    Sotacarbo in co-operation with Ansaldo Ricerche, ENEA and the University of Cagliari - Department of Mechanical Engineering, has developed a research project for design, construction and testing on a pilot plant for hydrogen and other environmental value fuel gas production, from Sulcis coal gasification. The project has been funded by Ministry of Education, University and Research (MIUR). The test facilities will be located in the Sotacarbo Research Centre, which is under construction in Carbonia, South East Sardinia (Italy). The test facility is designed to increase the environmental value of coal through the integration of gasification and suitable downstream syngas treatment sections for power and hydrogen enriched stream production which is employable as an energy carrier itself or into an internal combustion engine or potentially into fuel cells. 2 refs., 3 figs., 2 tabs.

  16. Modelling of Gas Flow in the Underground Coal Gasification Process and its Interactions with the Rock Environment

    Directory of Open Access Journals (Sweden)

    Tomasz Janoszek

    2013-01-01

    Full Text Available The main goal of this study was the analysis of gas flow in the underground coal gasification process and interactions with the surrounding rock mass. The article is a discussion of the assumptions for the geometric model and for the numerical method for its solution as well as assumptions for modelling the geochemical model of the interaction between gas-rock-water, in terms of equilibrium calculations, chemical and gas flow modelling in porous mediums. Ansys-Fluent software was used to describe the underground coal gasification process (UCG. The numerical solution was compared with experimental data. The PHREEQC program was used to describe the chemical reaction between the gaseous products of the UCG process and the rock strata in the presence of reservoir waters.

  17. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Jordi Perez-Mariano; Angel Sanjurjo

    2005-03-15

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this period, we conducted two 300-hour tests. In the first test, we exposed samples at 900 C under conditions simulating the high-temperature heat recovery unit (HTHRU). The second test was at 370 C, corresponding to the filter units following the HTHRU. The tests were showed the resilience of silicon nitride as a coating component, and the new coating procedures better penetrated the pores in sintered metal filter samples. Finally, we also received samples that were exposed in the Wabash River plant. Unfortunately, all these samples, that were prepared last year, were severely eroded and/or corroded.

  18. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2005-09-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this reporting period, we conducted several exposure tests with coated and uncoated coupons including a ''500-h'' test. The first experiment was a 316-h test and was designed to look at the performance of Ti/Ta nitride coatings, which seemed to fare the best in earlier tests. The next experiment was a 112-h test with a range of pure metals and commercially available materials. Its purpose was to help identify those metals that best withstood gasifier environment, and hence should be good ingredients for coatings. Finally, we ran a ''500-h'' test, which was also our milestone, with coupons coated with Ti/Ta nitride or Cr/Al coatings.

  19. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2005-12-01

    Heat exchangers, particle filters, turbines, and other components in an integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high-alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this reporting period, we conducted a simulated gasifier test primarily with TiN-coated steel samples. Although the test showed these coatings to offer significant protection against corrosion, they also revealed a lack of uniformity in the coatings. We spent a considerable amount of effort improving our coatings procedure as well as the fluidized bed reactor and its heater. Based on the results collected thus far, we selected 12 samples and sent them to ConocoPhillips for testing in their gasifier at the Wabash River Energy plant.

  20. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2006-06-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. In previous tests, we had frequently encountered problems with our steam generator that were exacerbated by the very low flow rates that we needed. During this period we installed a new computer-controlled system for injecting water into the steam generator that eliminated this problem. We also tested alloy coupons coated by using the improved procedures described in our last quarterly report. Most of these coatings were nitrided Ti and Ta coatings, either by themselves, or sometimes with barrier layers of Al and Si nitrides. The samples were tested for 300 h at 900 C in a gas stream designed to mimic the environment in the high temperature heat recovery unit (HTHRU). Three samples that showed least corrosion were exposed for an additional 100 h.

  1. Analysis on Treatment of Coal Gasification Wastewater Containing Phenols%煤气化含酚废水处理技术分析

    Institute of Scientific and Technical Information of China (English)

    付敏明; 王赟

    2016-01-01

    以鲁奇碎煤加压气化含酚废水为例,介绍了煤气化含酚废水的特性及危害,分析了处理含酚废水的生化、化学和物理技术,提出了对气化含酚废水解决方案的思考,为煤气化废水处理技术及方案选择提供了新的思路。%In this paper, taking Lurgi coal gasification phenol ̄containing wastewater as an example, the characteristics and hazards of the coal gasification wastewater containing phenol are introduced, and the biochemical, chemical and physical treatment technologies of wastewater are analyzed. The thinking about the treatment solution for the gasification wastewater is presented, which provides a new way for the coal gasification wastewater treatment technology and scheme selection.

  2. The formation of impurities in fluidized-bed gasification of biomass, peat and coal; Epaepuhtauksien muodostuminen leijukerroskaasutuksessa

    Energy Technology Data Exchange (ETDEWEB)

    Kurkela, E.; Laatikainen-Luntama, J.; Kurkela, M.; Leppaelahti, J.; Koljonen, T.; Oesch, P. [VTT Energy, Espoo (Finland); Alen, R. [Jyvaeskylae Univ. (Finland)

    1996-12-01

    The objective of this three-year-long project was to study the effects of different process parameters and bed materials on the formation of impurities in pressurized fluidized-bed gasification. The main emphasis of the project was focused on the formation of tars and nitrogen compounds in wood, peat and coal gasification. The aims of the research were to find out such operating conditions, where the formation of problematic high-molecular-weight tars can be minimised and to create a better understanding on the fate of fuel nitrogen in fluidized-bed gasifiers. Main part of the research was carried out in a bench-scale pressurised fluidized-bed reactor (ID 30 mm), where the effects of pressure, temperature, gas atmosphere and bed material were studied with different feedstocks. Most of the test series were carried out using the same feedstocks as earlier used in the PDU-scale fluidized-bed gasification tests of VTT (pine wood, pine bark, wheat straw, two peats, Rhenish brown coal, Polish and Illinois No.6 bituminous coals). The effects of operating parameters on the product yields (gas components, tars, char) were first studied under inert nitrogen atmosphere. The conversion of fuel nitrogen into ammonia and HCN were also determined for the different feedstocks over the different operating conditions. These studies showed that ammonia is the main fixed nitrogen compound of fluidized-bed pyrolysis with all the feedstocks studied. The conversions of fuel nitrogen into ammonia and HCN was highest with the high volatile fuels and lowest with the two hard coals. Gas atmosphere had a dramatic effect on the conversion of fuel nitrogen; much higher ammonia yields were determined in real gasification gas atmosphere than in inert pyrolysis carried out in N{sub 2} or Argon atmosphere. In addition to the pressurised fluidized-bed pyrolysis tests, laboratory scale pyrolysis research was carried out in order to compare the pyrolysis behaviour of the different feedstocks

  3. A novel approach to highly dispersing catalytic materials in coal for gasification. Final technical report, September 1989--November 1992

    Energy Technology Data Exchange (ETDEWEB)

    Abotsi, G.M.K.; Bota, K.B.

    1992-12-01

    The objectives of this project were to investigate the effects of coal surface charge on the uptake of aqueous soluble metal catalysts from solution and to determine the influence of the interfacial interaction on char reactivity. Another goal is to assess the potential of using potassium carbonate, potassium acetate or their mixtures as catalysts for char gasification. The lower cost and the high catalytic activity of the latter compound will produce economic benefits by reducing the amount of potassium carbonate required for efficient char reactivities on a commercial scale. To minimize the interference of the coals` inherent inorganic materials with the added calcium or potassium, the gasification studies were restricted to the demineralized coals. In a manner similar to the effect of pH on the surface electrochemistry of the coals, the reactivities of the calcium- or potassium-loaded chars in bon dioxide at 800{degree}C were dependent upon the pH at which the catalysts were ion-exchanged onto the coals. For the calcium-containing chars, the reactivities increased in the order: pH 6 > pH 10 > pH 1. In contrast, the variation of the gasification rates with potassium loading pH was: pH 6 {approximately} pH 10 {much_gt} pH 1. However, simultaneous adsorption of the metals at {approximately} pH 1 enhanced char reactivity relative to metals loading at pH 6 or 10. These findings are attributed to the differences in the extent of electrostatic interaction between the calcium or potassium ions and the charged coal surface during catalyst loading from solution.

  4. Plasma-Augmented Fluidized Bed Gasification of Sub-bituminous Coal in CO2-O2 Atmospheres

    Science.gov (United States)

    Lelievre, C.; Pickles, C. A.; Hultgren, S.

    2016-01-01

    The gasification of a sub-bituminous coal using CO2-O2 gas mixtures was studied in a plasma-augmented fluidized bed gasifier. Firstly, the coal was chemically characterized and the gasification process was examined using Thermogravimetric and Differential Thermal Analysis (TGA/DTA) in CO2, O2 and at a CO2 to O2 ratio of 3 to 1. Secondly, the equilibrium gas compositions were obtained using the Gibbs free energy minimization method (HSC Chemistry®7). Thirdly, gasification tests were performed in a plasma-augmented fluidized bed and the off-gas temperatures and compositions were determined. Finally, for comparison purposes, control tests were conducted using a conventional fluidized bed coal gasifier and these results were compared to those achieved in the plasma-augmented fluidized bed gasifier. The effects of bed temperature and CO2 to O2 ratio were studied. For both gasifiers, at a given bed temperature, the off-gas compositions were in general agreement with the equilibrium values. Also, for both gasifiers, an experimental CO2 to O2 ratio of about 3 to 1 resulted in the highest syngas grade (%CO + %H2). Both higher off-gas temperatures and syngas grades could be achieved in the plasma-augmented gasifier, in comparison to the conventional gasifier. These differences were attributed to the higher bed temperatures in the plasma-augmented fluidized bed gasifier.

  5. Wabash Valley Integrated Gasification Combined Cycle, Coal to Fischer Tropsch Jet Fuel Conversion Study

    Energy Technology Data Exchange (ETDEWEB)

    Shah, Jayesh [Lummus Technology Inc., Bloomfield, NJ (United States); Hess, Fernando [Lummus Technology Inc., Bloomfield, NJ (United States); Horzen, Wessel van [Lummus Technology Inc., Bloomfield, NJ (United States); Williams, Daniel [Lummus Technology Inc., Bloomfield, NJ (United States); Peevor, Andy [JM Davy, London (United Kingdom); Dyer, Andy [JM Davy, London (United Kingdom); Frankel, Louis [Canonsburgh, PA (United States)

    2016-06-01

    This reports examines the feasibility of converting the existing Wabash Integrated Gasification Combined Cycle (IGCC) plant into a liquid fuel facility, with the goal of maximizing jet fuel production. The fuels produced are required to be in compliance with Section 526 of the Energy Independence and Security Act of 2007 (EISA 2007 §526) lifecycle greenhouse gas (GHG) emissions requirements, so lifecycle GHG emissions from the fuel must be equal to or better than conventional fuels. Retrofitting an existing gasification facility reduces the technical risk and capital costs associated with a coal to liquids project, leading to a higher probability of implementation and more competitive liquid fuel prices. The existing combustion turbine will continue to operate on low cost natural gas and low carbon fuel gas from the gasification facility. The gasification technology utilized at Wabash is the E-Gas™ Technology and has been in commercial operation since 1995. In order to minimize capital costs, the study maximizes reuse of existing equipment with minimal modifications. Plant data and process models were used to develop process data for downstream units. Process modeling was utilized for the syngas conditioning, acid gas removal, CO2 compression and utility units. Syngas conversion to Fischer Tropsch (FT) liquids and upgrading of the liquids was modeled and designed by Johnson Matthey Davy Technologies (JM Davy). In order to maintain the GHG emission profile below that of conventional fuels, the CO2 from the process must be captured and exported for sequestration or enhanced oil recovery. In addition the power utilized for the plant’s auxiliary loads had to be supplied by a low carbon fuel source. Since the process produces a fuel gas with sufficient energy content to power the plant’s loads, this fuel gas was converted to hydrogen and exported to the existing gas turbine for low carbon power production. Utilizing low carbon fuel gas and

  6. Some Trace Elements Enrichment Features during Coal Gasification Process in Ningdong Coal Gasification Plant%宁东气化厂煤气化过程中几种微量元素的富集特性

    Institute of Scientific and Technical Information of China (English)

    王晓帅; 唐跃刚; 桓斌斌; 徐靖杰

    2016-01-01

    Through plasma mass spectrometric, atomic fluorescence spectrometric methods carried out trace elements V, Cr, Cu, Zn, Ba, Se, As and Pb content determination and analysis for coal and its residue during coal gasification process in the Ningdong coal gas⁃ification plant. The result has shown that compared with in the raw coal, the majority of these elements have showed better enrichment trend during gasification, enrichment extent of different gasified residues of same element can be 2~10 times as high. The lithophile ele⁃ments in the gasification coal showed better correlativity. Based on the GB15618-2008“Environmental Quality Standards for Soils”, el⁃ements As, Cu, Pb, Cr and Zn can be directly discharged, as for other elements should be continued to pay attention to and study their environmental effects further.%运用等离子体质谱分析法、原子荧光法等方法对宁东气化厂气化过程煤及其残渣进行了V、Cr、Cu、Zn、Ba、Se、As、Pb微量元素含量的测定与分析。结果表明:气化过程中这8种微量元素与原煤相比多数表现富集的趋势,相同元素不同气化残渣富集程度可达2~10倍;气化用煤中亲石元素表现出较好的相关性;根据GB15618-1995《土壤环境质量标准》,气化残渣中As、Cu、Pb、Cr、Zn元素可直接排放,其它元素需继续关注和进一步研究其环境效应。

  7. Effect of Colombian coal rank and its feeding technology on substitute natural gas production by entrained gasification

    Directory of Open Access Journals (Sweden)

    Juan Fernando Pérez-Bayer

    2016-01-01

    Full Text Available The effect of coal rank (from sub-bituminous to semi-anthracite and type of fuel feeding technology (slurry and dry on the production of substitute natural gas (SNG in entrained flow gasifiers is studied. Ten coals from important Colombian mines were selected. The process is modeled under thermochemical equilibrium using Aspen Plus, and its performance is evaluated in function of output parameters that include SNG heating value, Wobbe index, coal conversion efficiency, cold gas efficiency, process efficiency, global efficiency, and SNG production rate, among others. In descending order, the coal-to-SNG process improves energetically with the use of coals with: higher volatile-matter to fixed-carbon ratio, lower ash content, higher C+H/O ratio, and higher coal heating value. The overall energy efficiency of the slurry-feed technology (S-FT to produce SNG by gasification is 17% higher than the dry-feed technology (D-FT, possibly as a consequence of the higher CH4 concentration in the syngas (around 7 vol. % when the coal is fed as aqueous slurry. As the simulated SNG meets the natural gas (NG quality standards in Colombia, the substitute gaseous fuel could be directly transported through pipelines. Therefore, the coal-to-SNG process is a technically feasible and unconventional alternative for NG production.

  8. Low-Btu coal-gasification-process design report for Combustion Engineering/Gulf States Utilities coal-gasification demonstration plant. [Natural gas or No. 2 fuel oil to natural gas or No. 2 fuel oil or low Btu gas

    Energy Technology Data Exchange (ETDEWEB)

    Andrus, H E; Rebula, E; Thibeault, P R; Koucky, R W

    1982-06-01

    This report describes a coal gasification demonstration plant that was designed to retrofit an existing steam boiler. The design uses Combustion Engineering's air blown, atmospheric pressure, entrained flow coal gasification process to produce low-Btu gas and steam for Gulf States Utilities Nelson No. 3 boiler which is rated at a nominal 150 MW of electrical power. Following the retrofit, the boiler, originally designed to fire natural gas or No. 2 oil, will be able to achieve full load power output on natural gas, No. 2 oil, or low-Btu gas. The gasifier and the boiler are integrated, in that the steam generated in the gasifier is combined with steam from the boiler to produce full load. The original contract called for a complete process and mechanical design of the gasification plant. However, the contract was curtailed after the process design was completed, but before the mechanical design was started. Based on the well defined process, but limited mechanical design, a preliminary cost estimate for the installation was completed.

  9. Effect of coal rank and mineral matter on gasification reactivity of coal char treated at high temperature; Netsushorishita sekitan char no gas ka tokusei ni taisuru tanshu oyobi kobutsushitsu no eikyo

    Energy Technology Data Exchange (ETDEWEB)

    Morishita, K.; Takei, H.; Harano, A.; Takarada, T. [Gunma University, Gunma (Japan). Faculty of Engineering

    1996-10-28

    In the wide range from brown coal to anthracite, an investigation was made of effects of heat treatment on physical/chemical properties and of coal rank dependence. For the experiment, 12 kinds of coal samples were used, and for heat treatment, the fluidized bed heated by the electric furnace and the infrared-ray gold image furnace were used. To examine characteristics of the heat-treated coal char, conducted were oxygen gasification, TPD measurement, XRD measurement, alkali metal measurement, and pore distribution measurement. The following were obtained from the experiment. The gasification reaction rate of the char heat-treated in the temperature range between 900{degree}C to 1700{degree}C decreases with a rise of the temperature of heat treatment, and the degree of decrease in the rate depends on coal rank. The order of gasification rate between coal ranks depends on the temperature of heat treatment, and the lower the heat treatment temperature is, the more largely the gasification rate is influenced by catalysis of mineral matters included in the coal. As causes of the decrease in gasification rate associated with the rise in temperature of heat treatment, indicated were release of alkali metal having catalysis and decrease of active sites by carbonaceous crystallinity. 6 figs.

  10. Research progress in calcium catalytic action during coal gasification%煤气化过程中钙催化作用的研究进展

    Institute of Scientific and Technical Information of China (English)

    高美琪; 王玉龙; 李凡

    2015-01-01

    Catalytic gasification of coal has been widely investigated. As a catalyst for coal gasification,calcium has been concerned by many researchers. In this paper,the types of calcium that can play catalyst role in coal gasification are summarized. The mechanism and influencing factors of calcium catalytic coal gasification are discussed. It is pointed out that calcium can accelerate the coal gasification rate more effectively because of the synergistic effect when it is selected to catalyze coal gasification together with other materials. Meanwhile , the research on calcium catalytic coal gasification in the near future is prospected. It is suggested that the mechanism of calcium catalytic coal gasification should be further discussed. It is necessary to develop the catalytic coal gasification technology using limestone or slaked lime mixed with other materials,such as black-liquor.%煤的催化气化在国内外已被广泛研究,Ca 作为一种对煤气化反应具有催化作用的碱土金属催化剂也受到许多研究者的关注。本文总结了可作为煤气化反应催化剂的Ca的类型,论述了Ca催化煤气化反应的机理,分析了影响Ca催化作用的主要因素,指出当Ca与其他物质共同作为煤气化反应的催化剂时,往往可以产生协同效应,更有效地催化煤气化反应的进行。同时提出了今后在Ca催化煤气化反应方面所应进行的研究内容,认为进一步探讨Ca在煤气化反应过程中发生的催化机理,开发使用廉价的石灰石、熟石灰,并且与其他物质,尤其是纸浆黑液共同作为煤气化反应的催化剂很有必要。

  11. Revised users manual, Pulverized Coal Gasification or Combustion: 2-dimensional (87-PCGC-2): Final report, Volume 2. [87-PCGC-2

    Energy Technology Data Exchange (ETDEWEB)

    Smith, P.J.; Smoot, L.D.; Brewster, B.S.

    1987-12-01

    A two-dimensional, steady-state model for describing a variety of reactive and non-reactive flows, including pulverized coal combustion and gasification, is presented. Recent code revisions and additions are described. The model, referred to as 87-PCGC-2, is applicable to cylindrical axi-symmetric systems. Turbulence is accounted for in both the fluid mechanics equations and the combustion scheme. Radiation from gases, walls, and particles is taken into account using either a flux method or discrete ordinates method. The particle phase is modeled in a Lagrangian framework, such that mean paths of particle groups are followed. Several multi-step coal devolatilization schemes are included along with a heterogeneous reaction scheme that allows for both diffusion and chemical reaction. Major gas-phase reactions are modeled assuming local instantaneous equilibrium, and thus the reaction rates are limited by the turbulent rate mixing. A NO/sub x/ finite rate chemistry submodel is included which integrates chemical kinetics and the statistics of the turbulence. The gas phase is described by elliptic partial differential equations that are solved by an iterative line-by-line technique. Under-relaxation is used to achieve numerical stability. The generalized nature of the model allows for calculation of isothermal fluid mechanicsgaseous combustion, droplet combustion, particulate combustion and various mixtures of the above, including combustion of coal-water and coal-oil slurries. Both combustion and gasification environments are permissible. User information and theory are presented, along with sample problems. 106 refs.

  12. Physicochemical evolution during rice straw and coal co-pyrolysis and its effect on co-gasification reactivity.

    Science.gov (United States)

    Wei, Juntao; Gong, Yan; Guo, Qinghua; Ding, Lu; Wang, Fuchen; Yu, Guangsuo

    2017-03-01

    Physicochemical evolution (i.e. pore structure variation, carbon structure change and active AAEM transformation) during rice straw (RS) and Shenfu bituminous coal (SF) co-pyrolysis was quantitatively determined in this work. Moreover, the corresponding char gasification was conducted using a thermogravimetric analyzer (TGA) and relative reactivity was proposed to quantify the co-pyrolysis impact on co-gasification reactivity. The results showed that the development of pore structure in co-pyrolyzed chars was first inhibited and then enhanced with the decrease of SF proportion. The promotion effect of co-pyrolysis on order degree of co-pyrolyzed chars gradually weakened with increasing RS proportion. Co-pyrolysis mainly enhanced active K transformation in co-pyrolyzed chars and the promotion effect was alleviated with increasing RS proportion. The inhibition effect of co-pyrolysis on co-gasification reactivity weakened with increasing RS proportion and gasification temperature, which was mainly attributed to the combination of carbon structure evolution and active AAEM transformation in co-pyrolysis. Copyright © 2016 Elsevier Ltd. All rights reserved.

  13. Research and Development of Coal Gasification Technology%煤气化技术的研究现状与发展

    Institute of Scientific and Technical Information of China (English)

    蔡国峰; 刘勇; 安德成

    2011-01-01

    Coal gasification was the key technology for clean and high-efficiency coal utilization,and also the basis of the development of coal chemical processing.The characteristics of coal gasification technology of Texco,Lugri,Shell,GSP,and Opposed Multi-burner,Two Stage Pulverized Coal,and Ash Agglomerating were introduced,which would provide reference for choice of coal gasification technology.The prospect of China's coal gasification technology was forecasted.%煤气化技术是煤炭高效清洁利用的核心技术,是发展煤化工技术的基础。本文介绍了德士古、鲁奇、壳牌、GSP等国外煤气化技术的工艺特点以及多喷嘴对置、二段干粉及灰熔聚等国内气化技术,为我国企业选择合适的煤气化技术提供参考,并展望了我国煤气化技术的发展方向。

  14. Piping Design of Jinchengtai Coal Gasification Plant%金诚泰煤制甲醇项目气化装置管线设计

    Institute of Scientific and Technical Information of China (English)

    蔡国峰

    2012-01-01

    煤气化技术是煤炭高效清洁利用的核心技术,非熔渣—熔渣分级气化技术是我国完全自主知识产权的煤气化技术。本文以金诚泰煤制甲醇项目气化装置为例介绍了非熔渣—熔渣分级气化装置工艺流程、设备布置、部分管线材料的选择、阀门的选型和关键工艺管线的布置,提出了优化管道布置设计的建议。%Coal gasification was the key process for clean and high-efficiency coal utilization.Non-slag and slag stage technology was our country's own gasification technology.The characteristics of the coal gasification technology,the equipment layout of this coal gasification technology,the piping materials,valves selection and piping design were introduced by Jinchengtai Coal Gasification Plant,and the proposal for piping design was proposed.

  15. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Esperanza Alvarez; Kai-Hung Lau; Angel Sanjurjo

    2006-01-01

    Heat-exchangers, particle filters, turbines, and other components in integrated coal gasification combined cycle system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low-cost alloy may improve its resistance to such sulfidation attack, and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. During this period we tested coated alloy coupons under conditions designed to mimic the conditions in the filter unit after the high-temperature heat recovery unit (HTHRU). The filter unit is another important area where corrosion has caused unscheduled downtime, and the remedy has been the use of sintered metal tubes made of expensive alloys such as inconel. The objective of our test was to determine if those coatings on 400-series steel that were not able to withstand the harsher conditions of the HTHRU, may be sufficiently resistant for use in the filter unit, at the reduced temperatures. Indeed, most of our coatings survived well; the exceptions were the coated porous samples of SS316. We continued making improvements to our coatings apparatus and the procedure began during the last quarter. As a result of these modifications, the coupons we are now producing are uniform. We describe the improved procedure for preparing diffusion coatings. Finally, because porous samples of steel in grades other than SS316 are not readily available, we also decided to procure SS409 powder and fabricate our own sintered porous coupons.

  16. Conditions for testing the corrosion rates of ceramics in coal gasification systems

    Energy Technology Data Exchange (ETDEWEB)

    Hurley, J.P.; Nowok, J.W. [Univ. of North Dakota, Grand Forks, ND (United States)

    1996-08-01

    Coal gasifier operating conditions and gas and ash compositions affect the corrosion rates of ceramics used for construction in three ways: (1) through direct corrosion of the materials, (2) by affecting the concentration and chemical form of the primary corrodents, and (3) by affecting the mass transport rate of the primary corrodents. To perform an accurate corrosion test on a system material, the researcher must include all relevant corrodents and simulate conditions in the gasifier as closely as possible. In this paper, the authors present suggestions for conditions to be used in such corrosion tests. Two main types of corrosion conditions are discussed: those existing in hot-gas cleanup systems where vapor and dry ash may contribute to corrosion and those experienced by high-temperature heat exchangers and refractories where the main corrodent will be coal ash slag. Only the fluidized-bed gasification systems such as the Sierra Pacific Power Company Pinon Pine Power Project system are proposing the use of ceramic filters for particulate cleanup. The gasifier is an air-blown 102-MWe unit employing a Westinghouse{trademark} ceramic particle filter system operating at as high as 1100{degrees}F at 300 psia. Expected gas compositions in the filter will be approximately 25% CO, 15% H{sub 2}, 5% CO{sub 2}, 5% H{sub 2}O, and 50% N{sub 2}. Vapor-phase sodium chloride concentrations are expected to be 10 to 100 times the levels in combustion systems at similar temperatures, but in general the concentrations of the minor primary and secondary corrodents are not well understood. Slag corrosiveness will depend on its composition as well as viscosity. For a laboratory test, the slag must be in a thermodynamically stable form before the beginning of the corrosion test to assure that no inappropriate reactions are allowed to occur. Ideally, the slag would be flowing, and the appropriate atmosphere must be used to assure realistic slag viscosity.

  17. Utilization of lightweight materials made from coal gasification slags. Quarterly report, March 1995--May 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-06-01

    Integrated-gasification combined-cycle (IGCC) technology is an emerging technology that utilizes coal for power generation and production of chemical feedstocks. However, this process generates large amounts of solid waste, consisting of vitrified ash (slag) along with some unconverted carbon, which is disposed of as solid waste. In previous projects, Praxis investigated the utilization of {open_quotes}as-generated{close_quotes} slags for a wide variety of applications in road construction, cement and concrete production, agricultural applications, and as a landfill material. From these studies, we found that it would be extremely difficult for {open_quotes}as-generated{close_quotes} slag to find large-scale acceptance in the marketplace even at no cost because the materials it could replace were abundantly available at very low cost. It became apparent that a more promising approach would be to develop a variety of value-added products from slag that meet specific industry requirements. This approach was made feasible by the discovery that slag could be made into a lightweight material by controlled heating in a kiln at temperatures between 1400 and 1700{degrees}F. These results indicated the potential for using such materials as substitutes for conventional lightweight aggregates (LWA). The technology to produce lightweight and ultra-lightweight aggregates (ULWA) from slag was subsequently developed by Praxis with funding from the Electric Power Research Institute (EPRI), Illinois Clean Coal Institute (ICCI), and internal resources. The major objectives of the subject project, funded by DOE`s Morgantown Energy Technology Center (METC), are to demonstrate the technical and economic viability of commercial production of LWA and ULWA from slag and to test the suitability of these aggregates for various applications.

  18. Underground coal gasification with extended CO2 utilization as economic and carbon neutral approach to address energy and fertilizer supply shortages in Bangladesh

    OpenAIRE

    Natalie Christine Nakaten; Rafiqul Islam; Thomas Kempka

    2014-01-01

    The application of underground coal gasification (UCG) with proven carbon mitigation techniques may provide a carbon neutral approach to tackle electricity and fertilizer supply shortages in Bangladesh. UCG facilitates the utilization of deep-seated coal seams, not economically exploitable by conventional coal mining. The high- calorific synthesis gas produced by UCG can be used for e.g. electricity generation or as chemical raw material for hydrogen, methanol and fertilizer production....

  19. Thermophilic anaerobic digestion of Lurgi coal gasification wastewater in a UASB reactor.

    Science.gov (United States)

    Wang, Wei; Ma, Wencheng; Han, Hongjun; Li, Huiqiang; Yuan, Min

    2011-02-01

    Lurgi coal gasification wastewater (LCGW) is a refractory wastewater, whose anaerobic treatment has been a severe problem due to its toxicity and poor biodegradability. Using a mesophilic (35±2°C) reactor as a control, thermophilic anaerobic digestion (55±2°C) of LCGW was investigated in a UASB reactor. After 120 days of operation, the removal of COD and total phenols by the thermophilic reactor could reach 50-55% and 50-60% respectively, at an organic loading rate of 2.5 kg COD/(m(3) d) and HRT of 24 h; the corresponding efficiencies were both only 20-30% in the mesophilic reactor. After thermophilic digestion, the wastewater concentrations of the aerobic effluent COD could reach below 200 mg/L compared with around 294 mg/L if mesophilic digestion was done and around 375 mg/L if sole aerobic pretreatment was done. The results suggested that thermophilic anaerobic digestion improved significantly both anaerobic and aerobic biodegradation of LCGW.

  20. Pseudomonas frederiksbergensis sp. nov., isolated from soil at a coal gasification site.

    Science.gov (United States)

    Andersen, S M; Johnsen, K; Sørensen, J; Nielsen, P; Jacobsen, C S

    2000-11-01

    Phenotypic and genotypic characterization indicated that a group of 29 closely related phenanthrene-degrading bacteria from a coal gasification site in Frederiksberg, Copenhagen, Denmark, belonged to the genus Pseudomonas. The strains were isolated at two sampling occasions 2 years apart. The isolates were phenotypically different from any known species of the genus Pseudomonas and were therefore subject to further identification. Colonies were smooth and pale yellowish and did not produce pigments fluorescent in UV light when grown on King's B agar. Cells were rod-shaped, approximately 0.5-0.8 x 1.5-3.0 microm, and grew at 4 and 30 degrees C, but not 37 degrees C. The bacteria were oxidase- and catalase-positive, accumulated poly-beta-hydroxybutyrate and denitrified, but did not utilize D-xylose. The mean G+C content was 59.6 mol%. Phenotypic data and 16S rDNA sequence data information for Pseudomonas amygdali and Pseudomonas corrugata, and 16S rDNA sequence data for Pseudomonas chlororaphis and Pseudomonas syringae showed close relationships to these strains. However, DNA-DNA hybridization data showed that the isolates belong to a new species, for which the name Pseudomonas frederiksbergensis sp. nov. is proposed. The type strain is JAJ28T (DSM 13022T).

  1. Embryotoxic and teratogenic effects of aqueous extracts of tar from a coal gasification electrostatic precipitator.

    Science.gov (United States)

    Schultz, T W; Dumont, J N; Clark, B R; Buchanan, M V

    1982-01-01

    Aqueous extracts of tar from a coal gasification electrostatic precipitator were tested for its toxic and teratogenic potential in vitro on embryos of the amphibian Xenopus laevis. The 96-h LC50 and EC50 were determined to be 0.83% and 0.48%, respectively. The developmental stage of normal-appearing exposed embryos is not affected by increasing concentrations of the extract. Embryo growth, however, is significantly reduced at concentrations as low as 0.25%. Motility and pigmentation were effectively reduced relative to controls by extract concentrations of 0.5% and greater. Exposed embryos are shorter and stockier than controls. Malformations of head, eyes, viscera, and spine are common, and cartilage formation is abnormal. The epidermis is often hyperplastic, and large blisters occur over the somatic surface. The severity of abnormal development is directly related to the concentration of the toxicant to which the embryos are exposed. Chemical analysis shows that the aqueous extracts contain phenols, furans, monoaromatic and diaromatic hydrocarbons, and mono- and diazaarenes and/or monoaromatic amines.

  2. Gas Production Strategy of Underground Coal Gasification Based on Multiple Gas Sources

    Directory of Open Access Journals (Sweden)

    Duan Tianhong

    2014-01-01

    Full Text Available To lower stability requirement of gas production in UCG (underground coal gasification, create better space and opportunities of development for UCG, an emerging sunrise industry, in its initial stage, and reduce the emission of blast furnace gas, converter gas, and coke oven gas, this paper, for the first time, puts forward a new mode of utilization of multiple gas sources mainly including ground gasifier gas, UCG gas, blast furnace gas, converter gas, and coke oven gas and the new mode was demonstrated by field tests. According to the field tests, the existing power generation technology can fully adapt to situation of high hydrogen, low calorific value, and gas output fluctuation in the gas production in UCG in multiple-gas-sources power generation; there are large fluctuations and air can serve as a gasifying agent; the gas production of UCG in the mode of both power and methanol based on multiple gas sources has a strict requirement for stability. It was demonstrated by the field tests that the fluctuations in gas production in UCG can be well monitored through a quality control chart method.

  3. Gas production strategy of underground coal gasification based on multiple gas sources.

    Science.gov (United States)

    Tianhong, Duan; Zuotang, Wang; Limin, Zhou; Dongdong, Li

    2014-01-01

    To lower stability requirement of gas production in UCG (underground coal gasification), create better space and opportunities of development for UCG, an emerging sunrise industry, in its initial stage, and reduce the emission of blast furnace gas, converter gas, and coke oven gas, this paper, for the first time, puts forward a new mode of utilization of multiple gas sources mainly including ground gasifier gas, UCG gas, blast furnace gas, converter gas, and coke oven gas and the new mode was demonstrated by field tests. According to the field tests, the existing power generation technology can fully adapt to situation of high hydrogen, low calorific value, and gas output fluctuation in the gas production in UCG in multiple-gas-sources power generation; there are large fluctuations and air can serve as a gasifying agent; the gas production of UCG in the mode of both power and methanol based on multiple gas sources has a strict requirement for stability. It was demonstrated by the field tests that the fluctuations in gas production in UCG can be well monitored through a quality control chart method.

  4. Some studies on a solid-state sulfur probe for coal gasification systems

    Science.gov (United States)

    Jacob, K. T.; Rao, D. B.; Nelson, H. G.

    1978-01-01

    As a part of a program for the development of a sulfur probe for monitoring the sulfur potential in coal gasification reactors, an investigation was conducted regarding the efficiency of the solid electrolyte cell Ar+H2+H2S/CaS+CaF2+(Pt)//CaF2//Pt)+CaF2+CaS/H2S+H2+Ar. A demonstration is provided of the theory, design, and operation of a solid-state sulfur probe based on CaF2 electrolyte. It was found that the cell responds to changes in sulfur potential in a manner predicted by the Nernst equation. The response time of the cell at 1225 K, after a small change in temperature or gas composition, was 2.5 Hr, while at a lower temperature of 990 K the response time was approximately 9 hr. The cell emf was insensitive to a moderate increase in the flow rate of the test gas and/or the reference gas. The exact factors affecting the slow response time of galvanic cells based on a CaF2 electrolyte have not yet been determined. The rate-limiting steps may be either the kinetics of electrode reactions or the rate of transport through the electrolyte.

  5. Characterization of airborne trace metal and trace organic species from coal gasification.

    Science.gov (United States)

    Osborn, J F; Santhanam, S; Davidson, C I; Flotard, R D; Stetter, J R

    1984-12-01

    Fugitive emissions from a slagging fixed-bed coal-gasification pilot plant were analyzed by flameless atomic absorption spectrophotometry, gas chromatography, and mass spectrometry for trace metal and trace organic species. Analysis of the size distributions of airborne particulate matter inside the plant showed an abundance of large metal-containing particles; outdoor distributions in the vicinity of the plant resembled the indoor distributions, suggesting the importance of the gasifier in influencing ambient air quality. This conclusion was further supported by identification of similar organic compounds inside and outside the plant. Trace element enrichment factors based on the earth's crustal composition were greater than those based on the composition of the lignite used in the gasifier, showing the importance of characterizing the proper source material when inverstigating chemical fraction during aerosol formation. Enrichments in the present study were much greater than those found in previous sampling during aborted start-up and cleaning procedures, where normal operating temperatures had not yet been reached. Both studies showed evidence of enrichment factors which decreased with increasing particle size. Although much of the airborne mass was associated with large particles having low respirability, the high concentrations of some metals indoors suggests that further assessment of potential occupational exposures is warranted.

  6. Modeling of the coal gasification processes in a hybrid plasma torch

    Energy Technology Data Exchange (ETDEWEB)

    Matveev, I.B.; Serbin, S.I. [Applied Plasma Technology, Mclean, VA (USA)

    2007-12-15

    The major advantages of plasma treatment systems are cost effectiveness and technical efficiency. A new efficient electrodeless 1-MW hybrid plasma torch for waste disposal and coal gasification is proposed. This product merges several solutions such as the known inductive-type plasma torch, innovative reverse-vortex (RV) reactor and the recently developed nonequilibrium plasma pilot and plasma chemical reactor. With the use of the computational-fluid-dynamics-computational method, preliminary 3-D calculations of heat exchange in a 1-MW plasma generator operating with direct vortex and RV have been conducted at the air flow rate of 100 g/s. For the investigated mode and designed parameters, reduction of the total wall heat transfer for the reverse scheme is about 65 kW, which corresponds to an increase of the plasma generator efficiency by approximately 6.5%. This new hybrid plasma torch operates as a multimode, high power plasma system with a wide range of plasma feedstock gases and turn down ratio, and offers convenient and simultaneous feeding of several additional reagents into the discharge zone.

  7. Stabilization of spent sorbents from coal gasification. Technical report, December 1, 1992--February 28, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Abbasian, J.; Hill, A.H.; Wangerow, J.R. [Institute of Gas Technology, Chicago, IL (United States); Banerjee, D.D. [Illinois Clean Coal Inst., Carterville, IL (United States)

    1993-05-01

    The objective of this investigation is to determine the kinetics of reactions involving partially sulfided dolomite and oxygen, which is needed for the design of the reactor system for the stabilization of sulfide-containing solid wastes from gasification of high sulfur coals. To achieve this objective, samples of partially sulfided dolomite are reacted with oxygen at a variety of operating conditions in a fluidized-bed reactor, where external diffusion limitations are avoided by using small quantities of the sorbent and maintaining a high flow rate of the reactant gas. The reacted sorbents are analyzed to determine the extent of conversion as a function of operating variables including sorbent particle size, reaction temperature and pressure, and oxygen concentration. Samples of the partially sulfided dolomite were reacted with oxygen in the fluidized-bed rector at different operating conditions. The test parameters included the effects of solid residence time, oxygen concentration, and reaction temperature. The reacted solids were analyzed to determine the extent of CaS conversion to CaSO{sub 4}. The results of the tests conducted so far in the project indicate that the extent of conversion increase with increasing oxygen concentration and the solid residence time. The rate of reaction appears to be very sensitive to the reaction temperature.

  8. TIE for cyanides in groundwater at a former coal gasification plant

    Energy Technology Data Exchange (ETDEWEB)

    McLeay, M.; Cameron, M. [Hemmeram, Vancouver, BC (Canada); Elphick, J. [Nautilus Environmental Co., Burnaby, BC (Canada)

    2010-07-01

    Groundwater remediation efforts are underway at a former coal gasification plant site in British Columbia because the concentrations of cyanide and other substances were found to exceed aquatic life guidelines. Hemmera and Nautilus Environmental examined whether that groundwater was toxic to a variety of sensitive marine aquatic life species, and whether cyanide was the primary toxicant. Untreated groundwater containing cyanide, weak acid dissociable cyanide and free cyanide was tested for toxicity on bivalve larval survival, kelp zoospore germination, sea urchin gamete fertilization, and larval topsmelt survival and growth. The untreated groundwater was found to be toxic to kelp zoospores and sea urchin gametes, but relatively non-toxic to bivalve larvae and topsmelt. The following 4 toxicity identification evaluation (TIE) treatments were conducted on site groundwater: (1) acidification/aeration of the sample, (2) filtration of the sample through anion exchange media, (3) filtration of the sample through activated carbon, and (4) exposure of the sample to UV light. Both the cyanide concentration and the toxicity to kelp decreased considerably when the anion exchange treatment was applied. The results suggest that the toxicity may be attributed to cyanides in the groundwater. The information obtained from this study will be used to plan excavation water treatment strategies during site remediation as part of an ecological risk assessment for the site.

  9. Refractory Materials based on Magnesia-Alumina Spinel for Improved Performance in Coal Gasification Environments

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James Gordon [ORNL; Armstrong, Beth L [ORNL; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.; Smith, Jeffrey D [ORNL; O' Hara, Kelley [University of Missouri, Rolla

    2013-01-01

    As part of a larger project to develop novel refractory systems and techniques to reduce energy consumption of refractory lined vessels, a team composed of Oak Ridge National Laboratory, refractory manufacturer Minteq International, Inc., and academic partner Missouri University of Science and Technology have developed new refractory materials and coating systems specifically for application in coal gasification environments. Materials were developed under this U.S. DOE funded project to address the need for innovative refractory compositions by developing MgO-Al2O3 spinel gunnable refractory compositions utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques. Work was conducted to develop and deploy these new materials and to develop and apply low cost coatings using a colloidal approach for protection against attack of the refractory brick by the serviced environment. Additionally, a light-weight back-up refractory system was developed to help offset the high thermal conductivity inherent in spinel materials. This paper discusses the efforts involved in the development of these materials, along with the laboratory testing and evaluation of these materials leading to relevant results achieved toward the reduction of chemical reactions and mechanical degradation by the service environment though compositional and processing modifications.

  10. SPINEL-BASED REFRACTORIES FOR IMPROVED PERFORMANCE IN COAL GASIFICATION ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James Gordon [ORNL; Armstrong, Beth L [ORNL; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.; Smith, Jeffrey D [ORNL; O' Hara, Kelley [University of Missouri, Rolla

    2013-01-01

    Oak Ridge National Laboratory, in collaboration with refractory manufacturer Minteq International, Inc., academic partner Missouri University of Science and Technology and refractory end users have developed novel refractory systems and techniques to reduce energy consumption of refractory lined vessels. The objective of this U.S. DOE funded project was to address the need for innovative refractory compositions by developing MgO-Al 2O3 spinel gunnable refractory compositions utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques. Materials have been developed specifically for coal gasification environments and work has been performed to develop and apply low cost coatings using a colloidal approach for protection against attack of the refractory brick by the service environment and to develop a light-weight back-up refractory system to help offset the high thermal conductivity inherent in spinel materials. This paper discusses the systematic development of these materials, laboratory testing and evaluation of these materials, and relevant results achieved toward the reduction of chemical reactions and mechanical degradation by the service environment though compositional and processing modifications.

  11. DEVELOPMENT OF NOVEL SPINEL REFRACTORIES FOR USE IN COAL GASIFICATION ENVIRONMENTS

    Energy Technology Data Exchange (ETDEWEB)

    Hemrick, James Gordon [ORNL; Armstrong, Beth L [ORNL; Rodrigues-Schroer, Angela [Minteq International, Inc.; Colavito, [Minteq International, Inc.; Smith, Jeffrey D [ORNL; O' Hara, Kelley [University of Missouri, Rolla

    2011-01-01

    Work has been performed by Oak Ridge National Laboratory (ORNL), in collaboration with industrial refractory manufacturer (Minteq International, Inc.), academic research partner (Missouri University of Science and Technology) and end users to employ novel refractory systems and techniques to reduce energy consumption of refractory lined vessels found in industries such as aluminum, chemical, glass, and pulp and paper. The objective of the project was to address the need for new innovative refractory compositions by developing a family of novel MgO-Al 2O3 spinel structured unshaped refractory compositions (castables, gunnables, shotcretes, etc) utilizing new aggregate materials, bond systems, protective coatings, and phase formation techniques. As part of the four-year project funded by the U.S. Department of Energy (DOE), materials have been developed specifically for coal gasification environments. Additionally, work has been performed to develop and apply low cost coatings using a colloidal approach for protection against corrosion attack of the refractory brick and to develop a light-weight back-up refractory system to help offset the high thermal conductivity inherent in spinel materials. This paper discusses the development of these materials, along with preliminary results achieved toward the reduction of chemical reactions and mechanical degradation by the service environment.

  12. Gas Production Strategy of Underground Coal Gasification Based on Multiple Gas Sources

    Science.gov (United States)

    Tianhong, Duan; Zuotang, Wang; Limin, Zhou; Dongdong, Li

    2014-01-01

    To lower stability requirement of gas production in UCG (underground coal gasification), create better space and opportunities of development for UCG, an emerging sunrise industry, in its initial stage, and reduce the emission of blast furnace gas, converter gas, and coke oven gas, this paper, for the first time, puts forward a new mode of utilization of multiple gas sources mainly including ground gasifier gas, UCG gas, blast furnace gas, converter gas, and coke oven gas and the new mode was demonstrated by field tests. According to the field tests, the existing power generation technology can fully adapt to situation of high hydrogen, low calorific value, and gas output fluctuation in the gas production in UCG in multiple-gas-sources power generation; there are large fluctuations and air can serve as a gasifying agent; the gas production of UCG in the mode of both power and methanol based on multiple gas sources has a strict requirement for stability. It was demonstrated by the field tests that the fluctuations in gas production in UCG can be well monitored through a quality control chart method. PMID:25114953

  13. 配煤技术在Shell粉煤气化中的应用及优化%THE APPLICATION AND OPTIMIZATION OF COAL BLENDING IN SHELL PULVERIZED-COAL GASIFICATION PROCESS

    Institute of Scientific and Technical Information of China (English)

    吴国祥

    2012-01-01

    The requirement for coal property on Shell pulverized-coal gasification process is simply introduced and the definition and theoretical foundation of Coal blending technology are described.The main reasons for coal blending measure to Shell coal gasification plant are analyzed and concrete procedures of coal blending technology and corresponding cases are discussed in detail and the optimized measures for coal blending are resulted in.%介绍Shell粉煤气化工艺对煤质的要求,阐述配煤技术的定义及理论依据,分析Shell气化采用配煤措施的主要原因,详细论述配煤技术的具体实施步骤及相应案例,得出优化配煤的措施。

  14. A Brief Review of Viscosity Models for Slag in Coal Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Massoudi, Mehrdad; Wang, Ping

    2011-11-01

    Many researchers have defined the phenomenon of 'slagging' as the deposition of ash in the radiative section of a boiler, while 'fouling' refers to the deposition of ash in the convective-pass region. Among the important parameters affecting ash deposition that need to be studied are ash chemistry, its transport, deposit growth, and strength development; removability of the ash deposit; heat transfer mechanisms; and the mode of operation for boilers. The heat transfer at the walls of a combustor depends on many parameters including ash deposition. This depends on the processes or parameters controlling the impact efficiency and the sticking efficiency. For a slagging combustor or furnace, however, the temperatures are so high that much of the coal particles are melted and the molten layer, in turn, captures more particles as it flows. The main problems with ash deposition are reduced heat transfer in the boiler and corrosion of the tubes. Common ways of dealing with these issues are soot blowing and wall blowing on a routine basis; however, unexpected or uncontrolled depositions can also complicate the situation, and there are always locations inaccessible to the use of such techniques. Studies have indicated that slag viscosity must be within a certain range of temperatures for tapping and the membrane wall to be accessible, for example, between 1300 C and 1500 C, the viscosity is approximately 25 Pa {center_dot} s. As the operating temperature decreases, the slag cools and solid crystals begin to form. In such cases the slag should be regarded as a non-Newtonian suspension, consisting of liquid silicate and crystals. A better understanding of the rheological properties of the slag, such as yield stress and shear-thinning, are critical in determining the optimum operating conditions. To develop an accurate heat transfer model in any type of coal combustion or gasification process, the heat transfer and to some extent the rheological properties

  15. Characterization and Failure Analysis of Ceramic Filters Utilized for Emission Control Coal Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Daniel Mei; Jianren Zhou; Ziaul Huque

    1998-03-01

    Advanced integrated gasification combined cycle (IGCC) and pressurized fluidized bed combustion (PFBC) power system requires both hot gas desulfurization and particulate filtration to improve system thermal efficiency and overall performance. Therefore, effective high temperature ceramic filters are indispensable key component in both of the advanced IGCC and PFBC coal based power systems to perform hot gas cleanup work. To meet the environmental particulate emission requirements and improve thermal efficiency, ceramic filters are mainly utilized to cleanup the hot gas particulate to protect downstream heat exchanger and gas turbine components from fouling and corrosion. The mechanical integrity of ceramic filters and an efficient dust cake removal system are the key issues for hot gas cleanup systems. The filters must survive combined stresses due to mechanical, thermal, chemical and steam attack throughout normal operations (cold back pulse cleaning jets), unexpected excessive ash accumulation, and the start up and shut down conditions. To evaluate the design and performance of ceramic filters, different long term filter testing programs were conducted. To fulfill this purpose, two Advanced Particle Filter (APF) systems were complete at Tidd PFBC Demonstration Plant, in Brilliant, Ohio in late 1990 as part of the Department of Energy's (DOE) Clean Coal Technology Program. But the most undesirable thing ever happened was the sudden functional and physical failures of filters prior to its designed life time. In Tidd APF filter vessel, twenty eight (28) filters failed one time. Significant research effort has been carried out to find out the causes that led to the early failure of filters. In this work, the studies are emphasized on the possible failure causes analysis of rigid ceramic candle filters. The objectives of this program were to provide an systematic study on the characterization of filters, material laboratory analysis on filter micro-structure, the

  16. Study on the structure and gasification characteristics of selected South African bituminous coal in fluidised bed gasification

    CSIR Research Space (South Africa)

    Oboirien, BO

    2009-10-01

    Full Text Available . The microstructural characteristics of the parent coals and their resultant chars were determined using XRD, FTIR, Raman and petrographic analysis. The microstructural changes that occurred in the organic (maceral) and the inorganic (mineral) fractions of the selected...

  17. 煤转气技术在沥青搅拌设备上的应用%Application of Coal Gasification Technique to Pitch Mixer

    Institute of Scientific and Technical Information of China (English)

    刘波; 李自光

    2014-01-01

    Working principle of coal gasification generator and mixer structure and process flow have been de -scribed.In practical application , compared with conventional mixer , coal gasification mixer was provided with promi-nent energy saving benefit and environmental conservation advantage , which offered reference to coal gasification tech-nique development in future .%介绍了煤转气发生装置的工作原理及煤转气搅拌设备的结构和工艺流程。在实际应用中与传统的搅拌设备对比,煤转气搅拌设备具有突出的节能效益与环保优势,为今后煤转气技术的发展提供了参考。

  18. Influence of gas environment on reactions between sodium and silicon minerals during gasification of low-rank coal

    Energy Technology Data Exchange (ETDEWEB)

    Kosminski, A.; Agnew, J.B. [Department of Chemical Engineering, University of Adelaide, South Australia, 5005 (Australia); Ross, D.P. [Department of Chemical Engineering, Tokyo University of Agriculture and Technology, BASE, Nakamachi 2-24-16 Koganei, Tokyo, 184-8588 (Japan)

    2006-11-15

    Thermodynamic equilibrium calculations were performed to determine the possible compositions and conditions for formation of potential liquid phases responsible for fluidised bed agglomeration during gasification of a high-sulphur low-rank coal from South Australia. The coals from this region of Australia are typically characterised by containing high levels of sodium, silica and sulphur. The transformation behaviour of the form of sodium present in coal, as either a carboxylate forming part of the coal organic matter or as soluble salt (NaCl) and its reaction with silicon compounds (silica or kaolin) is presented. The influence of temperature and gas atmosphere on equilibrium composition was evaluated. Thermodynamic equilibrium calculations show that the distribution of sodium among the produced species will depend on the form of sodium in the coal, the gas atmosphere and the forms in which silicon is present in the coal. Steam was found to have the most significant effect causing a lowering of the sodium carbonate melting point temperature. (author)

  19. 两种加压煤气化工艺的比较%Comparison Between Two Types of Coal Gasification Processes

    Institute of Scientific and Technical Information of China (English)

    蔡洪涛; 范贵鑫

    2012-01-01

    Inherent advantages and disadvantages of the pressurized entrained flow coal gasification process and the pressurized fixed bed coal gasification process is introduced. By analyzing the utilization rate of the high temperature sensible heat from the gas gained from the pressurized entrained flow coal gasification process and the comparison of the features between two different pressurized gasification processes the paper concluded that the pressurized fixed bed coal gasification is a more advantageous process in producing SNG.%介绍了加压气流床煤气化工艺和加压固定床煤气化工艺固有的优点和缺点.分析了加压气流床煤气高温显热的利用率,探讨了加压固定床蒸汽消耗高、废水处理成本高和气化工艺氧耗低的原因.认为煤制天然气选择加压固定床煤气化工艺具有更多的优点.

  20. Social impact assessment of the proposed Dodds-RoundHill coal gasification project : project report : executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Parkins, J.R. (ed.)

    2009-07-01

    A public disclosure document was released for a proposed Dodds-RoundHill coal gasification project in January 2007, and the project was placed on hold in 2008 given some uncertainty around its future. However, there was a general sense that a project of this nature would be proposed for this coal-rich region at some point in the future. This report presented the results of a project completed by 14 graduate and undergraduate students in a social impact assessment course in 2009 at the University of Alberta. The purpose of the project was to learn specific concepts and methods for social impact assessment by undertaking such an assessment for the proposed Dodds-RoundHill coal gasification project, located southeast of Edmonton, Alberta. The 4 major components of a social impact assessment include scoping of relevant social indicators; social impacts within municipalities; social impacts within the farming region; and a comparative case study of social impacts. All of the research participants indicated that the project would have an impact on their community.

  1. Assessment of the chemical, microbiological and toxicological aspects of post-processing water from underground coal gasification.

    Science.gov (United States)

    Pankiewicz-Sperka, Magdalena; Stańczyk, Krzysztof; Płaza, Grażyna A; Kwaśniewska, Jolanta; Nałęcz-Jawecki, Grzegorz

    2014-10-01

    The purpose of this paper is to provide a comprehensive characterisation (including chemical, microbiological and toxicological parameters) of water after the underground coal gasification (UCG) process. This is the first report in which these parameters were analysed together to assess the environmental risk of the water generated during the simulation of the underground coal gasification (UCG) process performed by the Central Mining Institute (Poland). Chemical analysis of the water indicated many hazardous chemical compounds, including benzene, toluene, ethylbenzene, xylene, phenols and polycyclic aromatic hydrocarbons (PAHs). Additionally, large quantities of inorganic compounds from the coal and ashes produced during the volatilisation process were noted. Due to the presence of refractory and inhibitory compounds in the post-processing water samples, the microbiological and toxicological analyses revealed the high toxicity of the UCG post-processing water. Among the tested microorganisms, mesophilic, thermophilic, psychrophilic, spore-forming, anaerobic and S-oxidizing bacteria were identified. However, the number of detected microorganisms was very low. The psychrophilic bacteria dominated among tested bacteria. There were no fungi or Actinomycetes in any of the water samples. Preliminary study revealed that hydrocarbon-oxidizing bacteria were metabolically active in the water samples. The samples were very toxic to the biotests, with the TU50 reaching 262. None of biotests was the most sensitive to all samples. Cytotoxicity and genotoxicity testing of the water samples in Vicia uncovered strong cytotoxic and clastogenic effects. Furthermore, TUNEL indicated that all of the water samples caused sporadic DNA fragmentation in the nuclei of the roots.

  2. The development and selection of coal gasification technology%浅谈煤气化技术进展及选择

    Institute of Scientific and Technical Information of China (English)

    赵伟

    2009-01-01

    The significance of researching and developing coal gasification technology were elaborated. The key technologys were introduced and the advantages of every technology were analyzed. Some opinion were given on choo- sing coal gasification technology.%阐述了研究和开发煤气化技术的重要意义,详细介绍了目前国内外主流煤气化技术的进展及应用,比较了各种煤气化技术的优缺点,并对如何选择煤气化技术提出了自己的看法.

  3. 煤气化技术的发展及在IGCC中的应用%Development of Coal Gasification Technology and Its Application in IGCC

    Institute of Scientific and Technical Information of China (English)

    张东亮; 许世森

    2001-01-01

    本文阐述了煤气化技术的发展过程及各种气化工艺的技术特点。提出了中国第一座IGCC示范电站在煤气化技术选择方面应注意的问题。%The paper reviews the development course of the coal gasificationand the technical feature of various gasification process, some suggestions on the choice of coal gasification process about the China's first IGCC demonstra tion facilities are also put forward.

  4. Gasification system

    Science.gov (United States)

    Haldipur, Gaurang B.; Anderson, Richard G.; Cherish, Peter

    1983-01-01

    A method and system for injecting coal and process fluids into a fluidized bed gasification reactor. Three concentric tubes extend vertically upward into the fluidized bed. Coal particulates in a transport gas are injected through an inner tube, and an oxygen rich mixture of oxygen and steam are injected through an inner annulus about the inner tube. A gaseous medium relatively lean in oxygen content, such as steam, is injected through an annulus surrounding the inner annulus.

  5. Evaluation of wood chip gasification to produce reburn fuel for coal-fired boilers

    Science.gov (United States)

    Gasification/reburn testing with biomass and other wastes is of interest to both the U.S. Environmental Protection Agency (EPA) and the Italian Ministry of the Environment & Territory (IMET). Gasification systems that use wastes as feedstock should provide a clean, efficient sour...

  6. Evaluation of wood chip gasification to produce reburn fuel for coal-fired boilers

    Science.gov (United States)

    Gasification/reburn testing with biomass and other wastes is of interest to both the U.S. Environmental Protection Agency (EPA) and the Italian Ministry of the Environment & Territory (IMET). Gasification systems that use wastes as feedstock should provide a clean, efficient sour...

  7. Evaluation of wood chip gasification to produce reburrn fuel for coal-fired boilers: AWMA

    Science.gov (United States)

    Gasification or reburn testing with biomass and other wastes is of interest to both the U.S. Environmental Protection Agency (EPA) and the Italian Ministry of the Environment & Territory (IMET). Gasification systems that use wastes as feedstock should provide a clean, efficient s...

  8. Evaluation of Biomass Gasification to Produce Reburning Fuel for Coal-Fired Boilers

    Science.gov (United States)

    Gasification and reburning testing with biomass and other wastes is of interest to both the U.S. EPA and the Italian Ministry of the Environment & Territory. Gasification systems that use biofuels or wastes as feedstock can provide a clean, efficient source of synthesis gas and p...

  9. Evaluation of wood chip gasification to produce reburrn fuel for coal-fired boilers: AWMA

    Science.gov (United States)

    Gasification or reburn testing with biomass and other wastes is of interest to both the U.S. Environmental Protection Agency (EPA) and the Italian Ministry of the Environment & Territory (IMET). Gasification systems that use wastes as feedstock should provide a clean, efficient s...

  10. Coal technology program. Progress report, September 1977

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-10-01

    A successful hydrocarbonization experiment at 300 psi of hydrogen and approximately 1050/sup 0/F was completed with Illinois No. 6 coal that had been chemically pretreated with aqueous CaO and NaOH. In pressurized carbonization, one successful experiment at approximately 1100/sup 0/F and 415 psi of methane was completed with vacuum distillation residue from the H-Coal process. In the thick section pressure vessel work, procedures are being developed with the DATA TRAK heat treating facility to allow preparation of relatively large heat treated samples of 2 /sup 1///sub 4/ Cr-1 Mo steel. In the Gas-Fired Potassium Boiler Project, the potassium system installation was completed, the fill and drain tank was filled with potassium, and the checkout of the instruments and controls was nearly completed. The Coal-Fired Alkali Metal Power System Design Study was completed and a draft report describing the design was issued. Cesium was selected as the working fluid for the topping cycle. For the reference design, the furnace operated at atmospheric pressure and the cycle conditions for the power conversion systems were 1500/sup 0/F (1089 K) to 900/sup 0/F (756 K) for the topping cycle and 2400 psi (16.5 MPa)/1000/sup 0/F (811 K)/1000/sup 0/F (811 K) to 1 /sup 1///sub 2/ in. Hg (5079 Pa) for the steam system. ORNL was requested by DOE to develop a program for testing coal feeders currently under development. Work was continued on process modeling, the preparation of a Synthetic Fuels Research Digest, a survey of industrial coal conversion equipment capabilities, and studies of flash hydropyrolysis, hot gas purification processes, processes for heat recovery, and hydrogen production by the steam/molten iron process. Process and program analysis studies were continued on low-Btu gasification, direct combustion, advanced power conversion systems, liquefaction, high-Btu gasification, in-situ gasification, and coal beneficiation.

  11. Valve development for coal gasification plants: Phase I to Phase II transition. Quarterly technical program report, May--July 1978

    Energy Technology Data Exchange (ETDEWEB)

    Bellezza, D.

    1978-08-01

    This is the eighth in a series of Quarterly Technical Progress Reports relating to the Valve Development for Coal Gasification Plants Program. This document discusses engineering progress during the period of May to July 1978. The work described herein represents a continuation of the Phase I seat development effort for the Task III valve and the continuation of design engineering effort, necessary to prepare detail manufacturing drawings for use in the production of prototype valves during Phase II of this program. Work performed during this quarter consists of: valve design, thermal and stress analysis of valves, design detailing and specifications, quality assurance planning and various tests as outlined.

  12. Chemical composition of glass and crystalline phases in coarse coal gasification ash

    Energy Technology Data Exchange (ETDEWEB)

    R.H. Matjie; Zhongsheng Li; Colin R. Ward; David French [Sasol Technology (Pty) Ltd., Sasolburg (South Africa)

    2008-05-15

    A procedure has been developed for determining the chemical composition and relative abundance of the amorphous or glassy material, as well as crystalline phases, present in coarse coal gasification ash, in order to assist in predicting the behaviour of the material in cement/brick/concrete applications. The procedure is based on a combination of quantitative X-ray diffraction (XRD), chemical analysis and electron microprobe studies. XRD analysis indicates that the clinker samples contain a number of crystalline high temperature phases, including anorthite, mullite, cristobalite, quartz and diopside. Quantitative evaluation using Rietveld-based techniques has been used to determine the percentages of both the individual crystalline phases and the glass component. These data were then combined with the chemistry of the crystalline phases and the overall chemical composition of the ash to estimate the chemical composition of the glass phase, which is typically the most abundant component present in the different materials. Although there is some degree of scatter, comparison between the inferred glass composition from XRD and bulk chemistry and actual data on the glass composition using electron microprobe techniques suggest that the two approaches are broadly consistent. The microprobe further indicates that a range of compositions are present in the glassy and crystalline components of the ashes, including Si-Al-rich glass, metakaolin and Fe-Ca-Mg-Ti phases, as well as quartz, anorthite and an aluminophosphate material. Electron microprobe and XRD studies also show that pyrrhotite (FeS), representing a high temperature transformation product of pyrite, is present in some clinker and partially burnt carbonaceous shale samples. 27 refs., 5 figs., 7 tabs.

  13. Advanced treatment of biologically pretreated coal gasification wastewater by a novel heterogeneous Fenton oxidation process.

    Science.gov (United States)

    Zhuang, Haifeng; Han, Hongjun; Ma, Wencheng; Hou, Baolin; Jia, Shengyong; Zhao, Qian

    2015-07-01

    Sewage sludge from a biological wastewater treatment plant was converted into sewage sludge based activated carbon (SBAC) with ZnCl2 as activation agent, which was used as a support for ferric oxides to form a catalyst (FeOx/SBAC) by a simple impregnation method. The new material was then used to improve the performance of Fenton oxidation of real biologically pretreated coal gasification wastewater (CGW). The results indicated that the prepared FeOx/SBAC significantly enhanced the pollutant removal performance in the Fenton process, so that the treated wastewater was more biodegradable and less toxic. The best performance was obtained over a wide pH range from 2 to 7, temperature 30°C, 15 mg/L of H2O2 and 1g/L of catalyst, and the treated effluent concentrations of COD, total phenols, BOD5 and TOC all met the discharge limits in China. Meanwhile, on the basis of significant inhibition by a radical scavenger in the heterogeneous Fenton process as well as the evolution of FT-IR spectra of pollutant-saturated FeOx/BAC with and without H2O2, it was deduced that the catalytic activity was responsible for generating hydroxyl radicals, and a possible reaction pathway and interface mechanism were proposed. Moreover, FeOx/SBAC showed superior stability over five successive oxidation runs. Thus, heterogeneous Fenton oxidation of biologically pretreated CGW by FeOx/SBAC, with the advantages of being economical, efficient and sustainable, holds promise for engineering application.

  14. Laser-absorption sensing of gas composition of products from coal gasification

    Science.gov (United States)

    Jeffries, Jay B.; Sur, Ritobrata; Sun, Kai; Hanson, Ronald K.

    2014-06-01

    A prototype in-situ laser-absorption sensor for the real-time composition measurement (CO, CH4, H2O and CO2) of synthesis gas products of coal gasification (called here syngas) was designed, tested in the laboratory, and demonstrated during field-measurement campaigns in a pilot-scale entrained flow gasifier at the University of Utah and in an engineering-scale, fluidized-bed transport gasifier at the National Carbon Capture Center (NCCC). The prototype design and operation were improved by the lessons learned from each field test. Laser-absorption measurements are problematic in syngas flows because efficient gasifiers operate at elevated pressures (10-50 atm) where absorption transitions are collision broadened and absorption transitions that are isolated at 1 atm become blended into complex features, and because syngas product streams can contain significant particulate, producing significant non-absorption scattering losses of the transmission of laser light. Thus, the prototype sensor used a new wavelength-scanned, wavelength-modulation spectroscopy strategy with 2f-detection and 1f-normalization (WMS-2f/1f) that can provide sensitive absorption measurements of species with spectra blended by collision broadening even in the presence of large non-absorption laser transmission losses (e.g., particulate scattering, beam steering, etc.). The design of the sensor for detection of CO, CH4, H2O and CO2 was optimized for the specific application of syngas monitoring at the output of large-scale gasifiers. Sensor strategies, results and lessons learned from these field measurement campaigns are discussed.

  15. Prediction of coal slag foaming under gasification conditions by thermodynamic equilibrium calculations

    Energy Technology Data Exchange (ETDEWEB)

    Lim, S.; Oh, M. [Hongik University, Seoul (Republic of Korea). School of Chemical Engineering

    2007-09-15

    In slagging gasifiers, slag foaming can cause serious operational problems, so there is a need for investigation into the conditions causing slag foaming. Viscosity experiments were carried out examining viscosity, extent of swelling and Fe formation. Although extensive swelling was not observed, FeO reduction was observed under an N{sub 2}/CO gas atmosphere, but not under CO{sub 2}/CO. In order to predict FeO reduction conditions in the gasifier, a model for an adiabatic equilibrium gasifier was developed. The gas composition, the amount of gas to slag, and PO{sub 2} were calculated for a slurry-feed gasifier, and the results of the calculation were used to predict the reduction of FeO in slag by using FactSage. Under typical gasification conditions for Denisovsky coal, the predicted -O{sub 2} in the gasifier was not low enough to cause FeO reduction. The FactSage simulation for the viscometer conditions predicted no FeO reduction under a CO/CO{sub 2} atmosphere, but did predict Fe formation under CO/N{sub 2} conditions. At a 20% CO concentration, FeO reduction starts at temperatures above 1,600{sup o}C. Since the slag has a low viscosity at 1,600{sup o}C, the oxygen bubble may have escaped as it formed. Therefore, slag foaming, caused by FeO reduction in the slag, can only occur when the right conditions of viscosity and oxygen partial pressure are met.

  16. A Review of Underground Coal Gasification Research and Development in the United States

    Energy Technology Data Exchange (ETDEWEB)

    Camp, D. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-06-26

    An intense and productive period of research and development on underground coal gasification (UCG) took place in the United States from the mid-1970’s through the late 1980’s. It began with the translation and review of Soviet literature and ended with the Rocky Mountain 1 field test. This demonstrated the feasibility of newly-developed technologies that form the basis of many UCG projects around the world today. This period began with little domestic understanding of UCG and ended with an accurate observation-based conceptual model and a corresponding predictive multi-physics mathematical model of the process. The many accomplishments of this period form the main content of this report. This report also covers recent U.S. activities and accomplishments during the period 2004-2015, and touches briefly on the Bureau of Mines efforts between 1948 and 1963. Most of the activities were funded by the United States Department of Energy and its predecessors. While private/commercially-funded activities are reviewed here, the emphasis is on government-funded work. It has a much greater extent of publicly available reports and papers, and they generally contain much greater technical detail. Field tests were the marquis activities around which an integrated multi-faceted program was built. These are described in detail in Section 4. Highlights from modeling efforts are briefly covered, as the program was integrated and well-rounded, with field results informing models and vice-versa. The primary goal of this report is to review what has been learned about UCG from the U.S. experience in aggregate. This includes observations, conclusions, lessons-learned, phenomena understood, and technology developed. The latter sections of this report review these things.

  17. Integration of coal gasification and waste heat recovery from high temperature steel slags: an emerging strategy to emission reduction

    Science.gov (United States)

    Sun, Yongqi; Sridhar, Seetharaman; Liu, Lili; Wang, Xidong; Zhang, Zuotai

    2015-11-01

    With the continuous urbanization and industrialization in the world, energy saving and greenhouse gas (GHG) emission reduction have been serious issues to be addressed, for which heat recovery from traditional energy-intensive industries makes up a significant strategy. Here we report a novel approach to extract the waste heat and iron from high temperature steel slags (1450-1650 oC) produced in the steel industry, i.e., integration of coal gasification and steel slag treatment. Both the thermodynamics and kinetics of the pertinent reactions were identified. It was clarified that the kinetic mechanism for gasification varied from A2 model to A4 model (Avrami-Erofeev) in the presence of slags. Most importantly, the steel slags acted not only as good heat carriers but also as effective catalysts where the apparent activation energy for char gasification got remarkably reduced from 95.7 kJ/mol to 12.1 kJ/mol (A2 model). Furthermore, the FeO in the slags was found to be oxidized into Fe3O4, with an extra energy release, which offered a potential for magnetic separation. Moreover, based on the present research results, an emerging concept, composed of multiple industrial sectors, was proposed, which could serve as an important route to deal with the severe environmental problems in modern society.

  18. Integration of coal gasification and waste heat recovery from high temperature steel slags: an emerging strategy to emission reduction

    Science.gov (United States)

    Sun, Yongqi; Sridhar, Seetharaman; Liu, Lili; Wang, Xidong; Zhang, Zuotai

    2015-01-01

    With the continuous urbanization and industrialization in the world, energy saving and greenhouse gas (GHG) emission reduction have been serious issues to be addressed, for which heat recovery from traditional energy-intensive industries makes up a significant strategy. Here we report a novel approach to extract the waste heat and iron from high temperature steel slags (1450–1650 oC) produced in the steel industry, i.e., integration of coal gasification and steel slag treatment. Both the thermodynamics and kinetics of the pertinent reactions were identified. It was clarified that the kinetic mechanism for gasification varied from A2 model to A4 model (Avrami-Erofeev) in the presence of slags. Most importantly, the steel slags acted not only as good heat carriers but also as effective catalysts where the apparent activation energy for char gasification got remarkably reduced from 95.7 kJ/mol to 12.1 kJ/mol (A2 model). Furthermore, the FeO in the slags was found to be oxidized into Fe3O4, with an extra energy release, which offered a potential for magnetic separation. Moreover, based on the present research results, an emerging concept, composed of multiple industrial sectors, was proposed, which could serve as an important route to deal with the severe environmental problems in modern society. PMID:26558350

  19. The formation mechanism of CO2 and its conversion in the process of coal gasification under arc plasma conditions

    Science.gov (United States)

    He, Xiaojun; Zheng, Mingdong; Qiu, Jieshan; Zhao, Zongbin; Ma, Tengcai

    2006-05-01

    The carbon dioxide (CO2) formation mechanism and co-conversion of CO2 with coal was investigated in the process of coal gasification in a steam medium at atmospheric pressure under arc plasma conditions in a tube-type setup. The arc plasma was diagnosed in situ by optical emission spectroscopy and the gas products were analysed by gas chromatography. CO2 yields are correlated with the quantitative emission peak intensity of the active species in plasma when the operating parameter is changed. The results show that the greater the emission peak intensity of the CH radicals, C2 radicals, OH radicals or O atoms, the smaller the CO2 yield is, which means that the CO2 formation process is inhibited by increasing the concentration of the mentioned active species under arc plasma conditions. On the basis of the diagnosis results, co-conversion of CO2 and coal in a steam medium under plasma conditions was carried out in the same setup and the results show that CO2 conversion reaches 88.6% while the concentration of CO + H2 reaches 87.4%; at the same time, coal conversion is in the range 54.7-68.7%, which proves that co-conversion of CO2 and coal in a steam medium under plasma conditions might be a prospective way to utilize CO2 and the production of synthesis gas.

  20. Steam-Coal Gasification Using CaO and KOH for in Situ Carbon and Sulfur Capture

    Energy Technology Data Exchange (ETDEWEB)

    Siefert, Nicholas S. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Carnegie Mellon Univ., Pittsburgh, PA (United States); Shekhawat, Dushyant [National Energy Technology Lab. (NETL), Morgantown, WV (United States); Litster, Shawn [Carnegie Mellon Univ., Pittsburgh, PA (United States); Berry, David A. [National Energy Technology Lab. (NETL), Morgantown, WV (United States)

    2013-08-15

    We present experimental results of coal gasification with and without the addition of calcium oxide and potassium hydroxide as dual-functioning catalyst-capture agents. Using two different coal types and temperatures between 700 and 900 °C, we studied the effect of these catalyst-capture agents on (1) the syngas composition, (2) CO2 and H2S capture, and (3) the steam-coal gasification kinetic rate. The syngas composition from the gasifier was roughly 20% methane, 70% hydrogen, and 10% other species when a CaO/C molar ratio of 0.5 was added. We demonstrated significantly enhanced steam–coal gasification kinetic rates when adding small amounts of potassium hydroxide to coal when operating a CaO-CaCO3 chemical looping gasification reactor. For example, the steam–coal gasification kinetic rate increased 250% when dry mixing calcium oxide at a Ca/C molar ratio of 0.5 with a sub-bituminous coal, and the kinetic rate increased 1000% when aqueously mixing calcium oxide at a Ca/C molar ratio of 0.5 along with potassium hydroxide at a K/C molar ratio of 0.06. In addition, we conducted multi-cycle studies in which CaCO3 was calcined by heating to 900 °C to regenerate the CaO, which was then reused in repeated CaO-CaCO3 cycles. The increased steam-coal gasification kinetics rates for both CaO and CaO + KOH persisted even when the material was reused in six cycles of gasification and calcination. The ability of CaO to capture carbon dioxide decreased roughly 2-4% per CaO-CaCO3 cycle. We also discuss an important application of this combined gasifier-calciner to electricity generation and selling the purge stream as a precalcined feedstock to a cement kiln. In this scenario, the amount of purge stream required is fixed not by the degradation in the capture ability but rather by the requirements at the cement kiln on the amount of CaSO4 and ash in the precalcined feedstock.

  1. Pyrolysis and Gasification

    DEFF Research Database (Denmark)

    Astrup, Thomas; Bilitewski, B.

    2011-01-01

    Pyrolysis and gasification include processes that thermally convert carbonaceous materials into products such as gas, char, coke, ash, and tar. Overall, pyrolysis generates products like gas, tar, and char, while gasification converts the carboncontaining materials (e.g. the outputs from pyrolysis......) into a mainly gaseous output. The specific output composition and relative amounts of the outputs greatly depend on the input fuel and the overall process configuration. Although pyrolysis processes in many cases also occur in gasification (however prior to the gasification processes), the overall technology...... may often be described as gasification only. Pyrolysis, however, can also be employed without proceeding with gasification. Gasification is by no means a novel process; in the 19th century so-called ‘town gas’ was produced by the gasification of coal and for example used for illumination purposes...

  2. Diffusion Coatings for Corrosion-Resistant Components in Coal Gasification Systems

    Energy Technology Data Exchange (ETDEWEB)

    Gopala N. Krishnan; Ripudaman Malhotra; Jordi Perez; Marc Hornbostel; Kai-Hung Lau; Angel Sanjurjo

    2007-05-31

    Advanced electric power generation systems use a coal gasifier to convert coal to a gas rich in fuels such as H{sub 2} and CO. The gas stream contains impurities such as H{sub 2}S and HCl, which attack metal components of the coal gas train, causing plant downtime and increasing the cost of power generation. Corrosion-resistant coatings would improve plant availability and decrease maintenance costs, thus allowing the environmentally superior integrated-gasification-combined-cycle (IGCC) plants to be more competitive with standard power-generation technologies. Heat-exchangers, particle filters, turbines, and other components in the IGCC system must withstand the highly sulfiding conditions of the high-temperature coal gas over an extended period of time. The performance of components degrades significantly with time unless expensive high alloy materials are used. Deposition of a suitable coating on a low cost alloy will improve is resistance to such sulfidation attack and decrease capital and operating costs. The alloys used in the gasifier service include austenitic and ferritic stainless steels, nickel-chromium-iron alloys, and expensive nickel-cobalt alloys. The Fe- and Ni-based high-temperature alloys are susceptible to sulfidation attack unless they are fortified with high levels of Cr, Al, and Si. To impart corrosion resistance, these elements need not be in the bulk of the alloy and need only be present at the surface layers. In this study, the use of corrosion-resistant coatings on low alloy steels was investigated for use as high-temperature components in IGCC systems. The coatings were deposited using SRI's fluidized-bed reactor chemical vapor deposition technique. Diffusion coatings of Cr and Al were deposited by this method on to dense and porous, low alloy stainless steel substrates. Bench-scale exposure tests at 900 C with a simulated coal gas stream containing 1.7% H{sub 2}S showed that the low alloy steels such SS405 and SS409 coated with

  3. LWA demonstration applications using Illinois coal gasification slag: Phase 2. Technical report, September 1--November 30, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Choudhry, V. [Praxis Engineers, Inc., Milpitas, CA (United States); Steck, P. [Harvey Cement Products, Inc. (United States)

    1993-12-31

    The objectives of this program are to demonstrate the feasibility of producing ultra-lightweight aggregates (ULWA) from solid residues (slag) generated during the gasification of Illinois coals, and to test the products as substitutes for conventional aggregates produced by pyroprocessing of perlite ores. In Phase 1 of this project, Praxis developed a pilotscale production technique and produced a large batch of expanded aggregates from an Illinois coal slag feed. The Phase 2 work focuses on characterization and applications-oriented testing of the expanded slag products as substitutes for conventional ULWAs. Target applications include high-volume uses such as loose fill insulation, insulating concrete, lightweight precast products (blocks), waterproof wallboard, rooftiles, and filtration media. The precast products will be subjected to performance and characterization testing in conjunction with a commercial manufacturer of such products in order to obtain input from a potential user. The production of value-added products from slag will eliminate a solid waste and possibly enhance the overall gasification process economics, especially when the avoided costs of disposal are taken into consideration.

  4. Nitrogen removal from coal gasification wastewater by activated carbon technologies combined with short-cut nitrogen removal process.

    Science.gov (United States)

    Zhao, Qian; Han, Hongjun; Hou, Baolin; Zhuang, Haifeng; Jia, Shengyong; Fang, Fang

    2014-11-01

    A system combining granular activated carbon and powdered activated carbon technologies along with shortcut biological nitrogen removal (GAC-PACT-SBNR) was developed to enhance total nitrogen (TN) removal for anaerobically treated coal gasification wastewater with less need for external carbon resources. The TN removal efficiency in SBNR was significantly improved by introducing the effluent from the GAC process into SBNR during the anoxic stage, with removal percentage increasing from 43.8%-49.6% to 68.8%-75.8%. However, the TN removal rate decreased with the progressive deterioration of GAC adsorption. After adding activated sludge to the GAC compartment, the granular carbon had a longer service-life and the demand for external carbon resources became lower. Eventually, the TN removal rate in SBNR was almost constant at approx. 43.3%, as compared to approx. 20.0% before seeding with sludge. In addition, the production of some alkalinity during the denitrification resulted in a net savings in alkalinity requirements for the nitrification reaction and refractory chemical oxygen demand (COD) degradation by autotrophic bacteria in SBNR under oxic conditions. PACT showed excellent resilience to increasing organic loadings. The microbial community analysis revealed that the PACT had a greater variety of bacterial taxons and the dominant species associated with the three compartments were in good agreement with the removal of typical pollutants. The study demonstrated that pre-adsorption by the GAC-sludge process could be a technically and economically feasible method to enhance TN removal in coal gasification wastewater (CGW).

  5. Removal of COD, phenols and ammonium from Lurgi coal gasification wastewater using A2O-MBR system.

    Science.gov (United States)

    Wang, Zixing; Xu, Xiaochen; Gong, Zheng; Yang, Fenglin

    2012-10-15

    As a typical industrial wastewater, coal gasification wastewater has poor biodegradability and high toxicity. In this paper, a laboratory-scale anaerobic-anoxic-oxic membrane reactor (A(2)O-MBR) system was developed to investigate the treatment ability of coal gasification wastewater. The removal capacity of each pollutants used in this system were determined at different hydraulic residence times (HRT) and mixed liquor recycle ratios (R). The experimental results showed that this system could effectively deal with COD and phenol removal and remain in a stable level when the operational parameters altered, while the nitrification was sensitive to operational conditions. The best performance was obtained at HRT of 48 h and R of 3. The maximum removal efficiencies of COD, NH(4)(+)-N and phenols were 97.4%, 92.8% and 99.7%, with final concentrations in the effluent of 71 mg/L, 9.6 mg/L and 3 mg/L, respectively. Organics degradation and transformation were analyzed by GC/MS and it was found that anaerobic process played an important role in degradation of refractory compounds.

  6. Recovery strategies for tackling the impact of phenolic compounds in a UASB reactor treating coal gasification wastewater.

    Science.gov (United States)

    Wang, Wei; Han, Hongjun

    2012-01-01

    The impact of phenolic compounds (around 3.2 g/L) resulted in a completely failed performance in a mesophilic UASB reactor treating coal gasification wastewater. The recovery strategies, including extension of HRT, dilution, oxygen-limited aeration, and addition of powdered activated carbon were evaluated in batch tests, in order to obtain the most appropriate way for the quick recovery of the failed reactor performance. Results indicated that addition of powdered activated carbon and oxygen-limited aeration were the best recovery strategies in the batch tests. In the UASB reactor, addition of powdered activated carbon of 1 g/L shortened the recovery time from 25 to 9 days and oxygen-limited aeration of 0-0.5 mgO2/L reduced the recovery time to 17 days. Reduction of bioavailable concentration of phenolic compounds and recovery of sludge activity were the decisive factors for the recovery strategies to tackle the impact of phenolic compounds in anaerobic treatment of coal gasification wastewater.

  7. Environmental life cycle assessment of methanol and electricity co-production system based on coal gasification technology.

    Science.gov (United States)

    Śliwińska, Anna; Burchart-Korol, Dorota; Smoliński, Adam

    2017-01-01

    This paper presents a life cycle assessment (LCA) of greenhouse gas emissions generated through methanol and electricity co-production system based on coal gasification technology. The analysis focuses on polygeneration technologies from which two products are produced, and thus, issues related to an allocation procedure for LCA are addressed in this paper. In the LCA, two methods were used: a 'system expansion' method based on two approaches, the 'avoided burdens approach' and 'direct system enlargement' methods and an 'allocation' method involving proportional partitioning based on physical relationships in a technological process. Cause-effect relationships in the analysed production process were identified, allowing for the identification of allocation factors. The 'system expansion' method involved expanding the analysis to include five additional variants of electricity production technologies in Poland (alternative technologies). This method revealed environmental consequences of implementation for the analysed technologies. It was found that the LCA of polygeneration technologies based on the 'system expansion' method generated a more complete source of information on environmental consequences than the 'allocation' method. The analysis shows that alternative technologies chosen for generating LCA results are crucial. Life cycle assessment was performed for the analysed, reference and variant alternative technologies. Comparative analysis was performed between the analysed technologies of methanol and electricity co-production from coal gasification as well as a reference technology of methanol production from the natural gas reforming process.

  8. Effects of coal gasification slag as a substrate for the plant Cyperus esculentus and the worm Eisenia fetida.

    Science.gov (United States)

    Jenner, H A; Janssen-Mommen, J P; Koeman, J H

    1992-08-01

    A further development of the coal gasification process will result in an increase of the amount of coal gasification slag (CGS). As yet little is known about the effects of storage in uncovered dumps. If there are any environmental effects, they are most likely caused by accumulation of metals from the CGS or by unacceptable physical properties of the CGS. Growth inhibition, mortality, and metal accumulation were analyzed for the plant Cyperus esculentus and the worm Eisenia fetida on CGS substrate. Pulverized fuel ash (PFA) was used as a reference. Both in the substrate and in tissues the concentrations of the cations Cu, Ni, Pb, and Zn and the anions As, B, Cr, Mo, Sb, and Se were determined. The availability of anions for C. esculentus and for E. fetida is greater in PFA than in CGS. The extent and rate of uptake of anionic metals by the plants is on the whole higher in the wetland situation. The availability of metals, expressed as the concentration factor (CF), in most cases appears to be smaller than 1 for nearly all elements. In E. fetida a CF greater than 1 was found only for the element As, in PFA substrate and 50% CGS. In C. esculentus a CF greater than 1 was found for B and Mo in the PFA substrate as well.

  9. Variation in the temperature field of rocks overlying a high-temperature cavity during underground coal gasification

    Institute of Scientific and Technical Information of China (English)

    Luo Ji'an; Wang Lianguo; Tang Furong; He Yan; Zheng Lin

    2011-01-01

    High temperature affects rocks in a way that changes the physical and mechanical properties of them.The temperature field in rock overlying a high temperature zone has been estimated using experimental research on thermal conductivity of the overlying strata.Numerical analysis software was used to estimate rock thermal conductivity at different temperatures.These estimates were then used with COMSOL Multiphysics to perform a numerical analysis with the heat conduction model.The results show that rock thermal conductivity decreases as the temperature increases and that various lithologies show similar behavior.The thermal conductivity of each rock type differs from the others at a given temperature.Exact values for the temperature distribution in the overlying strata during the process of underground coal gasification are obtained from the numerical simulation.The temperature in the rock changes with the height and direction from the gasifier.Temperature gradients vary for different types of rock.This result provides an important reference for further study of the strength of overlying strata subject to the process of underground coal gasification.

  10. Molten Salt Coal Gasification Process Development Unit. Phase 2. Quarterly technical progress report No. 2, October-December 1980

    Energy Technology Data Exchange (ETDEWEB)

    Slater, M. H.

    1981-01-20

    This represents the second quarterly progress report on Phase 2 of the Molten Salt Coal Gasification Process Development Unit (PDU) Program. Phase 1 of this program started in March 1976 and included the design, construction, and initial operation of the PDU. On June 25, 1980, Phase 2 of the program was initiated. It covers a 1-year operations program utilizing the existing PDU and is planned to include five runs with a targeted total operating time of 9 weeks. During this report period, Run 6, the initial run of the Phase 2 program was completed. The gasification system was operated for a total of 95 h at pressures up to 10 atm. Average product gas HHV values of 100 Btu/scf were recorded during 10-atm operation, while gasifying coal at a rate of 1100 lb/h. The run was terminated when the melt overflow system plugged after 60 continuous hours of overflow. Following this run, melt withdrawal system revisions were made, basically by changing the orifice materials from Monofrax to an 80 Cobalt-20 Chromium alloy. By the end of the report period, the PDU was being prepared for Run 7.

  11. DISCUSSION ON OPERATING TEMPERATURE OF TEXACO COAL GASIFICATION FURNACE%Texaco 煤气化炉操作温度的探讨

    Institute of Scientific and Technical Information of China (English)

    李聿营

    2015-01-01

    简要分析Texaco煤气化工艺技术特点以及操作温度对气化工艺的影响,对气化炉操作温度的影响因素、判断方法进行了深入探讨,结合齐鲁煤气化装置运行经验提出了气化炉操作温度的具体控制措施。%This paper briefly analyzed the characteristics of Texaco coal gasification tech-nology and influence of operating temperature on the gasification process.Influence factors and the judging methods for operating temperature of the gasifier were discussed.Specific control measures for operating temperature of the gasifier were given combining with the running experi-ence of the Qilu coal gasification plant.

  12. Volatilisation and catalytic effects of alkali and alkaline earth metallic species during the pyrolysis and gasification of Victorian brown coal. Part IV. Catalytic effects of NaCl and ion-exchangeable Na in coal on char reactivity

    Energy Technology Data Exchange (ETDEWEB)

    Dimple Mody Quyn; Hongwei Wu; Jun-ichiro Hayashi; Chun-Zhu Li, [Monash University, Monash, Vic. (Australia). CRC for Clean Power from Lignite, Department of Chemical Engineering

    2003-03-01

    The purpose of this study is to investigate the catalytic effects of Na as NaCl or as sodium carboxylates ( COONa) in Victorian brown coal on the char reactivity. A Na-exchanged coal and a set of NaCl-loaded coal samples prepared from a Loy Yang brown coal were pyrolysed in a fluidised-bed/fixed-bed reactor and in a thermogravimetric analyser (TGA). The reactivities of the chars were measured in air at 400{sup o}C using the TGA. The experimental data indicate that the Na in coal as NaCl and as sodium carboxylates ( COONa) had very different catalytic effects on the char reactivity. It is the chemical form and dispersion of Na in char, not in coal, that govern the catalytic effects of Na. For the Na-form (Na-exchanged) coal, the char reactivity increased with increasing pyrolysis temperature from 500 to 700{sup o}C and then decreased with pyrolysis temperature from 700 to 900{sup o}C. The increase in reactivity with pyrolysis temperature (500 700{sup o}C) is mainly due to the changes in the relative distribution of Na in the char matrix and on the pore surface. For the NaCl-loaded coals, when Cl was released during pyrolysis or gasification, the Na originally present in coal as NaCl showed good catalytic effects for the char gasification. Otherwise, Cl would combine with Na in the char to form NaCl during gasification, preventing Na from becoming an active catalyst. Controlling the pyrolysis conditions to favour the release of Cl can be a promising way to transform NaCl in coal into an active catalyst for char gasification. 38 refs., 5 figs.

  13. Properties and Developments of Combustion and Gasification of Coal and Char in a CO2-Rich and Recycled Flue Gases Atmosphere by Rapid Heating

    Directory of Open Access Journals (Sweden)

    Zhigang Li

    2012-01-01

    Full Text Available Combustion and gasification properties of pulverized coal and char have been investigated experimentally under the conditions of high temperature gradient of order 200°C·s−1 by a CO2 gas laser beam and CO2-rich atmospheres with 5% and 10% O2. The laser heating makes a more ideal experimental condition compared with previous studies with a TG-DTA, because it is able to minimize effects of coal oxidation and combustion by rapid heating process like radiative heat transfer condition. The experimental results indicated that coal weight reduction ratio to gases followed the Arrhenius equation with increasing coal temperature; further which were increased around 5% with adding H2O in CO2-rich atmosphere. In addition, coal-water mixtures with different water/coal mass ratio were used in order to investigate roles of water vapor in the process of coal gasification and combustion. Furthermore, char-water mixtures with different water/char mass ratio were also measured in order to discuss the generation ratio of CO/CO2, and specified that the source of Hydrocarbons is volatile matter from coal. Moreover, it was confirmed that generations of CO and Hydrocarbons gases are mainly dependent on coal temperature and O2 concentration, and they are stimulated at temperature over 1000°C in the CO2-rich atmosphere.

  14. Novel approach to coal gasification using chemically incorporated catalysts (Phase II). Appendix A-F. Final report, May 1978-June 1981

    Energy Technology Data Exchange (ETDEWEB)

    Feldmann, H.F.; Conkle, H.N.; Appelbaum, H.R.; Chauhan, S.P.

    1981-01-01

    This volume contains six appendices: experimental apparatus, test conditions, and results of catalytic coal treatment; direct hydrogasification; summary of test runs for hydrogasification of BTC; summary of test runs for hydrogasification of char; summary of steam/O/sub 2/ gasification runs; and process analysis. Forty tables and nine figures are also included.

  15. HT-L与Shell及Texaco粉煤气化技术的比较%Technological Comparison of HT-L with Shell and Texaco Pulverized Coal Gasification Processes

    Institute of Scientific and Technical Information of China (English)

    吴胜军

    2011-01-01

    介绍了HT-L粉煤气化技术的工艺特点,并从比氧耗、有效气成分、煤气化效率、能耗等方面与Shell 及Texaco粉煤气化技术进行了分析比较.结果表明:HT-L粉煤气化技术具有高效节能、煤种适用范围广、气化效率高、能耗低、建设和运行成本低、工艺成熟可靠并具有自主知识产权的优点,具有广阔的发展前景.%Process features are described of the HT-L pulverized coal gasification technology, and an analytical comparison is done with the Shell and Texaco pulverized coal gasification technology in terms of specific oxygen consumption, active gas constituent, coal gasification efficiency, and energy consumption. The results show that the HT-L technology has the advantages of highly efficient energy saving, wide scope of application to various coal types, high gasification efficiency, low energy consumption, low construction and operation cost, mature and reliable technology, and possession of independent intellectual property, and so it brings about broad prospects for development.

  16. 德士古煤气化装置设计问题探讨%Study on Design of Texaco Coal Gasification Units

    Institute of Scientific and Technical Information of China (English)

    王旭宾

    2001-01-01

    本文对国内德士古煤气化装置运行中暴露出的设计问题进行了探讨。%This paper studies the design problems which are exposed at therunning of Texaco coal gasification units in China.

  17. GE与Shell两种煤制气方法的技术特点比较%Technologies and Process Comparison of GE and Shell Coal Gasification

    Institute of Scientific and Technical Information of China (English)

    翟延平

    2012-01-01

    对GE和Shell两种煤制气方法的技术现状进行剖析,对其工艺特点进行比较。%To analyze the present situation of GE and Shell.Two kinds of coal gasification technologies.To compare the process characteristics of these two technologies.

  18. Economic competitiveness of underground coal gasification combined with carbon capture and storage in the Bulgarian energy network

    Energy Technology Data Exchange (ETDEWEB)

    Nakaten, Natalie Christine

    2014-11-15

    Underground coal gasification (UCG) allows for exploitation of deep-seated coal seams not economically exploitable by conventional coal mining. Aim of the present study is to examine UCG economics based on coal conversion into a synthesis gas to fuel a combined cycle gas turbine power plant (CCGT) with CO2 capture and storage (CCS). Thereto, a techno-economic model is developed for UCG-CCGT-CCS costs of electricity (COE) determination which, considering sitespecific data of a selected target area in Bulgaria, sum up to 72 Euro/MWh in total. To quantify the impact of model constraints on COE, sensitivity analyses are undertaken revealing that varying geological model constraints impact COE with 0.4% to 4%, chemical with 13%, technical with 8% to 17% and market-dependent with 2% to 25%. Besides site-specific boundary conditions, UCG-CCGT-CCS economics depend on resources availability and infrastructural characteristics of the overall energy system. Assessing a model based implementation of UCG-CCGT-CCS and CCS power plants into the Bulgarian energy network revealed that both technologies provide essential and economically competitive options to achieve the EU environmental targets and a complete substitution of gas imports by UCG synthesis gas production.

  19. 煤炭地下气化空间扩展规律及控制方法研究综述%REVIEW ON CAVITY GROWTH LAWS AND CONTROL IN UNDERGROUND COAL GASIFICATION

    Institute of Scientific and Technical Information of China (English)

    王在泉; 华安增

    2001-01-01

    The influences of cavity growth in underground coal gasification on gasification process are analyzed on the basis of introduction of underground coal gasification. The development of space expanding laws and control methods in underground coal gasification are reviewed. The problems and ideas to be studied deeply are put forward combining with the gasification characteristics of China.%在介绍煤炭地下气化特点的基础上,对地下气化空间扩展及气化过程影响进行了分析,综述了国内外在煤炭地下气化空间扩展规律及控制方法的研究进展,结合中国的气化工艺特点,提出了需进一步研究的课题。

  20. Gasification technology assessment of sterile coal to clean electrical power generation.

    OpenAIRE

    2013-01-01

    Sterile coal is a low-value residue associated to the coal extraction and mining activity. According to the type and origin of the coal bed configuration, sterile coal production can mainly vary on quantity, calorific value and presence of sulphur compounds. In addition, the potential availability of sterile coal within Spain is apparently high and its contribution to the local power generation would be of interest playing a significant role. The proposed study evaluates the availability an...