WorldWideScience

Sample records for high-btu by-product gas

  1. Technology characterization: high Btu gas transmission

    Energy Technology Data Exchange (ETDEWEB)

    None

    1977-04-01

    A technology characterization for high Btu gas transmission was prepared. The scope of work was confined to a literature review. The work was divided into four specific areas as follows: (1) a summary of pertinent information from the environmental report of the Great Lakes Gas Company for a 365-mile high pressure pipeline serving American Natural Gas Company's proposed lignite gasification plant in North Dakota; (2) statistical information concerning the operation of the existing United States natural gas transmission pipeline network; (3) a summary of pertinent information from the environmental impact statement of the United States Department of Interior for the proposed 1,619-mile Northern Border Pipeline from Morgan, Montana to Delmont, Pennsylvania; and (4) a summary of pertinent information from the environmental impact statement of the Federal Power Commission for a proposed El Paso Natural Gas Company 418-mile pipeline within the State of Texas which was to be constructed in response to the displacement of natural gas by Liquefied Natural Gas (LNG) importation on the East Coast.

  2. High-Btu coal gasification processes

    Energy Technology Data Exchange (ETDEWEB)

    Blazek, C.F.; Baker, N.R.; Tison, R.R.

    1979-01-01

    This evaluation provides estimates of performance and cost data for advanced technology, high-Btu, coal gasification facilities. The six processes discussed reflect the current state-of-the-art development. Because no large commercial gasification plants have yet been built in the United States, the information presented here is based only on pilot-plant experience. Performance characteristics that were investigated include unit efficiencies, product output, and pollution aspects. Total installed plant costs and operating costs are tabulated for the various processes. The information supplied here will assist in selecting energy conversion units for an Integrated Community Energy System (ICES).

  3. BUILDING MATERIALS MADE FROM FLUE GAS DESULFURIZATION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    Michael W. Grutzeck; Maria DiCola; Paul Brenner

    2006-03-30

    Flue gas desulphurization (FGD) materials are produced in abundant quantities by coal burning utilities. Due to environmental restrains, flue gases must be ''cleaned'' prior to release to the atmosphere. They are two general methods to ''scrub'' flue gas: wet and dry. The choice of scrubbing material is often defined by the type of coal being burned, i.e. its composition. Scrubbing is traditionally carried out using a slurry of calcium containing material (slaked lime or calcium carbonate) that is made to contact exiting flue gas as either a spay injected into the gas or in a bubble tower. The calcium combined with the SO{sub 2} in the gas to form insoluble precipitates. Some plants have been using dry injection of these same materials or their own Class C fly ash to scrub. In either case the end product contains primarily hannebachite (CaSO{sub 3} {center_dot} 1/2H{sub 2}O) with smaller amounts of gypsum (CaSO{sub 4} {center_dot} 2H{sub 2}O). These materials have little commercial use. Experiments were carried out that were meant to explore the feasibility of using blends of hannebachite and fly ash mixed with concentrated sodium hydroxide to make masonry products. The results suggest that some of these mixtures could be used in place of conventional Portland cement based products such as retaining wall bricks and pavers.

  4. Land application uses for dry flue gas desulfurization by-products: Phase 3

    Energy Technology Data Exchange (ETDEWEB)

    Dick, W.; Bigham, J.; Forster, R.; Hitzhusen, F.; Lal, R.; Stehouwer, R.; Traina, S.; Wolfe, W.; Haefner, R.; Rowe, G.

    1999-01-31

    New flue gas desulfurization (FGD) scrubbing technologies create a dry, solid by-product material consisting of excess sorbent, reaction product that contains sulfate and sulfite, and coal fly ash. Generally, dry FGD by-products are treated as solid wastes and disposed in landfills. However, landfill sites are becoming scarce and tipping fees are constantly increasing. Provided the environmental impacts are socially and scientifically acceptable, beneficial uses via recycling can provide economic benefits to both the producer and the end user of the FGD. A study titled ''Land Application Uses for Dry Flue Gas Desulfurization By-Products'' was initiated in December, 1990 to develop and demonstrate large volume, beneficial uses of FGD by-products. Phase 1 and Phase 2 reports have been published by the Electric Power Research Institute (EPRI), Palo Alto, CA. Phase 3 objectives were to demonstrate, using field studies, the beneficial uses of FGD by-products (1) as an amendment material on agricultural lands and on abandoned surface coal mine land, (2) as an engineering material for soil stabilization and raid repair, and (3) to assess the environmental and economic impacts of such beneficial uses. Application of dry FGD by-product to three soils in place of agricultural limestone increased alfalfa (Medicago sativa L.) and corn (Zea may L.) yields. No detrimental effects on soil and plant quality were observed.

  5. Flue gas desulfurization by-products additions to acid soil: alfalfa productivity and environmental quality

    Energy Technology Data Exchange (ETDEWEB)

    Chen, L.; Dick, W.A.; Nelson, S.

    2001-07-01

    Flue gas desulfurization (FGD) by-products are often alkaline and contain many plant nutrients. Land application of FGD by-products is encouraged but little information is available related to plant responses and environmental impacts concerning such use. Agricultural lime (ag-lime) and several new types of FGD by-products which contain either vermiculite or perlite were applied at 0, 0.5, 1.0, and 2.0 times the soil's lime requirement (LR) rate to an acidic soil (Wooster silt loam). The highest FGD by-products application rate was equivalent to 75.2 Mg ha{sup -1}. Growth of alfalfa (Medicago sativa L.) was significantly increased compared to the untreated control in the second year after treatment with yields for the 1 x LR rate of FGD approximately 7-8 times greater compared to the untreated control and 30% greater than for the commercial ag-lime. Concentrations of Mo in alfalfa were significantly increased by FGD by-products application, compared to the untreated control, while compared to the ag-lime treatment, concentrations of B increased and Ba decreased. No soil contamination problems were observed, even at the 2xLR rate, indicating these materials can be safely applied to agricultural soils.

  6. Land application uses for dry flue gas desulfurization by-products. Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Dick, W.; Bigham, J.; Forster, R.; Hitzhusen, F.; Lal, R.; Stehouwer, R.; Traina, S.; Wolfe, W.; Haefner, R.; Rowe, G.

    1999-01-31

    Flue gas desulfurization (FGD) scrubbing technologies create several types of by-products. This project focused primarily on by-product materials obtained from what are commonly called ''dry scrubbers'' which produce a dry, solid material consisting of excess sorbent, reaction product that contains sulfate and sulfite, and coal fly ash. Prior to this project, dry FGD by-products were generally treated as solid wastes and disposed in landfills. However, landfill sites are becoming scarce and tipping fees are constantly increasing; The major objective of this project was to develop beneficial uses, via recycling, capable of providing economic benefits to both the producer and the end user of the FGD by-product. It is equally important, however, that the environmental impacts be carefully assessed so that the new uses developed are not only technically feasible but socially acceptable. Specific objectives developed for this project were derived over an 18-month period during extensive discussions with personnel from industry, regulatory agencies and research institutions. These were stated as follows: Objective 1: To characterize the material generated by dry FGD processes. Objective 2: To demonstrate the utilization of dry FGD by-product as a soil amendment on agricultural lands and on abandoned and active surface coal mines in Ohio. Objective 3: To demonstrate the use of dry FGD by-product as an engineering material for soil stabilization. Objective 4: To determine the quantities of dry FGD by-product that can be utilized in each of these applications. Objective 5. To determine the environmental and economic impacts of utilizing the material. Objective 6. To calibrate environmental, engineering, and economic models that can be used to determine the applicability and costs of utilizing these processes at other sites.

  7. Evaluation of some by-Products using In situ and In vitro Gas Production Techniques

    Directory of Open Access Journals (Sweden)

    Besharati Maghsoud

    2008-01-01

    Full Text Available Food by-products in Iran are produced in high levels. In this study, in situ and in vitro gas production techniques were used to describe nutritive value of apple pomace, tomato pomace and noodle waste. For this purpose two ruminal fistulated sheep were used. Nylon bags which were approximately (6×12 cm containing 5 g samples (2 mm screen were incubated in duplicate in the rumen of fistulated sheep for 0,2,4,6,8,12,16,24,36 and 48 h. The gas production was recorded after 2, 4, 6, 8, 12, 16, 24, 36 and 48 h of incubation and the equation of P = A (1-e-ct was used to describe the kinetics of gas production. The data was analyzed using completely randomized design. DM and CP disappearance were significantly different among feedstuffs (p<0.05. After 48 h of incubation DM disappearance in noodle waste was highest and in tomato pomace was lowest. Regarding to the results, at the most incubation times tomato pomace had lower CP disappearance among feedstuffs (p<0.05. Potential gas production (A and rates of gas production (c differed among feedstuffs. Apple pomace showed higher potential gas production (A (305.1 mL g1 DM and tomato pomace had higher rate of gas production (c (0.09 h1 than the other feedstuffs. According to gas production volume, the value for the ME, OMD and SCFA ranged from in 8.87 noodle waste to 9.76 in apple pomace, 56.1 in tomato pomace to 64.3 in apple pomace and 0.919 in noodle waste to 1.168 in apple pomace, respectively. Partitioning factor in noodle waste was highest and in tomato pomace was lowest. In the present study, feeds composition significantly affected the degradation parameters.

  8. Biological removal of organic constituents in quench waters from high-Btu coal-gasification pilot plants

    Energy Technology Data Exchange (ETDEWEB)

    Stamoudis, V C; Luthy, R G

    1980-02-01

    Studies were initiated to assess the efficiency of bench-scale, activated-sludge treatment for removal of organic constituents from coal-gasification process effluents. Samples of pilot-plant, raw-gas quench waters were obtained from the HYGAS process of the Institute of Gas Technology and from the slagging, fixed-bed (SFB) process of the Grand Forks Energy Technology Center. The types of coal employed were Bituminous Illinois No. 6 for the HYGAS and Indian Head lignite for the SFB process. These pilot-plant quench waters, while not strictly representative of commercial condensates, were considered useful to evaluate the efficiency of biological oxidation for the removal of organics. Biological-reactor influent and effluent samples were extracted using a methylene chloride pH-fractionation method into acid, base, and neutral fractions, which were analyzed by capillary-column gas-chromatography/mass-spectrometry. Influent acid fractions of both HYGAS and SFB condensates showed that nearly 99% of extractable and chromatographable organic material comprised phenol and alkylated phenols. Activated-sludge treatment removed these compounds almost completely. Removal efficiency of base-fraction organics was generally good, except for certain alkylated pyridines. Removal of neutral-fraction organics was also good, except for certain alkylated benzenes, certain polycyclic aromatic hydrocarbons, and certain cycloalkanes and cycloalkenes, especially at low influent concentrations.

  9. Bioenergy by-products as soil amendments? Implications for carbon sequestration and greenhuise gas emissions

    NARCIS (Netherlands)

    Cayuela, M.L.; Oenema, O.; Kuikman, P.J.; Bakker, R.R.; Groenigen, van J.W.

    2010-01-01

    An important but little understood aspect of bioenergy production is its overall impact on soil carbon (C) and nitrogen (N) cycling. Increased energy production from biomass will inevitably lead to higher input of its by-products to the soil as amendments or fertilizers. However, it is still unclear

  10. Recovery of SO2 and MgO from By-Products of MgO Wet Flue Gas Desulfurization.

    Science.gov (United States)

    Yan, Liyun; Lu, Xiaofeng; Wang, Quanhai; Guo, Qiang

    2014-11-01

    An industrial demonstration unit using natural gas as a heat source was built to calcine the by-products of MgO wet flue gas desulfurization from power plants; influencing factors on the SO2 content in calciner gas were comprehensively analyzed; and an advantageous recycling condition of MgO and SO2 from by-products was summarized. Results showed that the SO2 content in the calciner gas was increased by more than 10 times under a lower excess air coefficient, a higher feed rate, a lower crystal water in by-products, and a higher feed port position. For the tests conducted under the excess air coefficient above and below one, the effect of the furnace temperature on the SO2 content in the calciner gas was reversed. Results of activity analysis indicate that particles of MgO generated under the calcination temperature of 900-1,000°C had a high activity. In contrast, due to the slight sintering, MgO generated under the calcination temperature of 1,100°C had a low activity. To recycle SO2 as well as MgO, a temperature range of 900-927°C for TE103 is proposed. These studies will prompt the desulfurization market diversification, reduce the sulfur's dependence on imports for making sulfuric acid, be meaningful to balance the usage of the natural resource in China, and be regarded as a reference for the development of this technology for other similar developing countries.

  11. Management of dry flue gas desulfurization by-products in underground mines

    Energy Technology Data Exchange (ETDEWEB)

    Sevim, H.

    1997-06-01

    Disposal of coal combustion by-products (CCBs) in an environmentally sound manner is a major issue facing the coal and utility industries in the US today. Disposal into abandoned sections of underground coal mines may overcome many of the surface disposal problems along with added benefits such as mitigation of subsidence and acid mine drainage. However, many of the abandoned underground coal mines are located far from power plants, requiring long distance hauling of by-products which will significantly contribute to the cost of disposal. For underground disposal to be economically competitive, the transportation and handling cost must be minimized. This requires careful selection of the system and optimal design for efficient operation. The materials handling and system economics research addresses these issues. Transportation and handling technologies for CCBs were investigated from technical, environmental and economic points of view. Five technologies were found promising: (1) Pneumatic Trucks, (2) Pressure Differential Rail Cars, (3) Collapsible Intermodal Containers, (4) Cylindrical Intermodal Tanks, and (5) Coal Hopper Cars with Automatic Retractable Tarping. The first two technologies are currently being utilized in transporting by-products from power plants to disposal sites, whereas the next three are either in development or in conceptualization phases. In this research project, engineering design and cost models were developed for the first four technologies. The engineering design models are in the form of spreadsheets and serve the purpose of determining efficient operating schedules and sizing of system components.

  12. Management of dry flue gas desulfurization by-products in underground mines. Topical report, April 1, 1996--April 30, 1997

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Brackebusch, F.; Carpenter, J. [and others

    1998-12-31

    This report represents the Final Technical Progress Report for Phase II of the overall program for a cooperative research agreement between the U.S. Department of Energy - MORGANTOWN Energy Technology Center (DOE-METC) and Southern Illinois University at Carbondale (SIUC). Under the agreement, SIUC will develop and demonstrate technologies for the handling, transport, and placement in abandoned underground coal mines of dry flue gas desulfurization by-products, such as fly ash, scrubber sludge, fluidized bed combustion by-products, and will assess the environmental impact of such underground placement. The overall program is divided into three (3) phases. Phase II of the program is primarily concerned with developing and testing the hardware for the actual underground placement demonstrations. Two technologies have been identified and hardware procured for full-scale demonstrations: (1) hydraulic placement, where coal combustion by-products (CCBs) will be placed underground as a past-like mixture containing about 70 to 75 percent solids; and (2) pneumatic placement, where CCBs will be placed underground as a relatively dry material using compressed air. 42 refs., 36 figs., 36 tabs.

  13. Management of dry flue gas desulfurization by-products in underground mines. Annual report, October 1994--September 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Dutta, D.; Esling, S. [and others

    1995-10-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center (DOE-METC) and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues (CCBs) in abandoned coal mines, and will assess the environmental impact of such underground CCB placement. This report describes progress in the following areas: environmental characterization, mix development and geotechnical characterization, material handling and system economics, underground placement, and field demonstration.

  14. Incineration of animal by-products--The impact of selected parameters on the flux of flue gas enthalpy.

    Science.gov (United States)

    Bujak, Janusz; Sitarz, Piotr

    2016-04-01

    This paper presents model analyses and tests of animal by-product waste thermal treatment plants. A schedule of tests was prepared, and 62,024 cases of system operation were analysed. A map/work field of the tested plant was drawn up on the basis thereof. Calculations were made following an algorithm described by Bujak (2015a) written in the VBA (Visual Basic for Application) language. The tests showed that when incinerating animal waste, the flux of physical enthalpy of the flue gas from the afterburner chamber depends on numerous design and operating parameters. The most important include the following: humidity and flux of the waste, concentration of oxygen in the flue gas in the afterburner chamber and loss of heat flux to the atmosphere through the external surfaces of the plant. Individual design and operating parameters can be selected so that the process of incineration is ensured without additional fuel. The performed analyses were verified against the actual object at the industrial scale using a meat plant that manufactures ham and processes beef, pork and poultry with a capacity of 150 tonnes/day. The production process waste included mainly bones and - in much smaller quantities - meat and bone meal, at 17 tonnes/day. The performed tests and analyses can be used to optimise the operation of the waste thermal treatment plant at the stages of design and operation.

  15. Formation of PCDDs and PCDFs from methane-flame , Gas-phase by-products; soot deposits; and fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Wikstrom, E.; Touati, A.; Ryan, S.; Gullet, B.

    2002-07-01

    Simple methane or propane flame combustion at sooty conditions with hydrogen chloride (HCI) present, as well as numerous experiments conducted with only fly ash present as the source of carbon and chlorine (de novo synthesis) have shown significant formation of chlorinated compounds, such as polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs). In a full-scale incinerator, both fly ash and flame products are present simultaneously, and the relative importance of the two carbon sources for the formation of PCDDs/Fs is still undetermined. An important question to be answered is whether PCDDs/Fs are formed through a series of reactions of gas-phase flame by-products formed at various concentrations depending on the equivalence ratio and/or from the carbon matrix present in flame soot and fly ash. Additionally, how important are catalytic reactions by metals present in the fly ash for the formation of PCDDs/Fs?. Experiments conducted in a laboratory scale reactor using a methane flame doped with chlorine and addition of fly ash in the flue gas provided answers to many of the important questions regarding the PCDDs/Fs formation mechanism during high-temperature processes. (Author)

  16. Management of dry flue gas desulfurization by-products in underground mines. Quarterly report, October--December 1994

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.; Dutta, D.; Esling, S.; Ghafoori, N.; Paul, B.; Sevim, H.; Thomasson, E.

    1995-01-01

    On September 30, 1993, the US Department of Energy, Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative agreement entitled ``Management of Dry Flue Gas Desulfurization By-Products in Underground Mines`` (DE-FC21-93MC30252). Under the agreement, Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. The major event during the quarter was the demonstration of the SEEC, Inc. technology for loading and transporting coal combustion residues in the SEEC developed Collapsible Intermodal Containers (CIC). The demonstration was held on November 17, 1994, at the Illinois Power Company Baldwin power plant, and was attended by about eighty (80) invited guest. Also during the quarter meetings were held with Peabody Coal Company officials to finalize the area in the Peabody No. 10 mine to be used for the placement of coal combustion residues. Work under the Materials Handling and Systems Economics area continued, particularly in refining the costs and systems configuration and in economic evaluation of various systems using equipment leasing rather than equipment purchases. Likewise, work progressed on residues characterization, with some preparations being made for long-term testing.

  17. Management of dry flue gas desulfurization by-products in underground mines. Quarterly technical progress report, April 1995--June 1995

    Energy Technology Data Exchange (ETDEWEB)

    Chugh, Y.P.; Dutta, D.; Esling, S. [and others

    1995-07-01

    On September 30, 1993, the U.S. Department of Energy-Morgantown Energy Technology Center and Southern Illinois University at Carbondale (SIUC) entered into a cooperative research agreement entitled {open_quotes}Management of Dry Flue Gas Desulfurization By-Products in Underground Mines{close_quotes} (DE-FC21-93MC30252). Under the agreement Southern Illinois University at Carbondale will develop and demonstrate several technologies for the placement of coal combustion residues in abandoned coal mines, and will assess the environmental impact of such underground residues placement. Previous quarterly Technical Progress Reports have set forth the specific objectives of the program, and a discussion of these is not repeated here. Rather, this report discusses the technical progress made during the period April 1 - June 30, 1995. A final topical report on the SEEC, Inc. demonstration of its technology for the transporting of coal combustion residues was completed during the quarter, although final printing of the report was accomplished early in July, 1995. The SEEC technology involves the use of Collapsible Intermodal Containers (CIC`s) developed by SEEC, and the transportation of such containers - filled with fly ash or other coal combustion residues - on rail coal cars or other transportation means. Copies of the final topical report, entitled {open_quotes}The Development and Testing of Collapsible Intermodal Containers for the Handling and Transport of Coal Combustion Residues{close_quotes} were furnished to the Morgantown Energy Technology Center. The Rapid Aging Test colums were placed in operation during the quarter. This test is to determine the long-term reaction of both the pneumatic and hydraulic mixtures to brine as a leaching material, and simulates the conditions that will be encountered in the actual underground placement of the coal combustion residues mixtures. The tests will continue for about one year.

  18. Reclamation of acid, toxic coal spoils using wet flue gas desulfurization by-product, fly ash and sewage sludge. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Kost, D.A.; Vimmerstedt, J.P.; Stehouwer, R.C.

    1997-03-01

    Establishment of vegetation on acid abandoned minelands requires modification of soil physical and chemical conditions. Covering the acid minesoil with topsoil or borrow soil is a common practice but this method may be restricted by availability of borrow soil and cause damage to the borrow site. An alternative approach is to use waste materials as soil amendments. There is a long history of using sewage sludge and fly ash as amendments for acid minesoils. Flue gas desulfurization (FGD) by-products are newer materials that are also promising amendments. Most flue gas sludges are mixtures of Calcium sulfate (CaSO{sub 4}), calcium sulfite (CaSO{sub 3}), calcium carbonate (CaCO{sub 3}), calcium hydroxide [Ca(OH){sub 2}], and fly ash. Some scrubbing processes produce almost pure gypsum (CaSO{sub 4}2H{sub 2}O). The primary purpose of the project is to evaluate two wet FGD by-products for effects on vegetation establishment and surface and ground water quality on an acid minesoil. One by-product from the Conesville, OH power plant (American Electric Power Service Corporation) contains primarily calcium sulfite and fly ash. The other by-product (Mg-gypsum FGD) from an experimental scrubber at the Zimmer power plant (Cincinnati Gas and Electric Company) is primarily gypsum with 4% magnesium hydroxide. These materials were compared with borrow soil and sewage sludge as minesoil amendments. Combinations of each FGD sludge with sewage sludge were also tested. This report summarizes two years of measurements of chemical composition of runoff water, ground water at two depths in the subsoil, soil chemical properties, elemental composition and yield of herbaceous ground cover, and elemental composition, survival and height of trees planted on plots treated with the various amendments. The borrow soil is the control for comparison with the other treatments.

  19. Fast analysis of volatile organic compounds and disinfection by-products in drinking water using solid-phase microextraction-gas chromatography/time-of-flight mass spectrometry.

    Science.gov (United States)

    Niri, Vadoud H; Bragg, Leslie; Pawliszyn, Janusz

    2008-08-08

    A fast method was developed for the extraction and analysis of volatile organic compounds, including disinfection by-products (DBPs), with headspace solid-phase microextraction (HS-SPME) and gas chromatography/mass spectrometry (GC/MS) techniques. A GC/time-of-flight (TOF)-MS instrument, which had fast acquisition rates and powerful deconvolution software, was used. Under optimum conditions total runtime was 45s. Volatile organic compounds (VOCs), including purgeable A and B compounds (listed in US Environmental Protection Agency method 624), were identified in standard water samples. Extraction times were 1min for more volatile compounds and 2min for less volatile compounds. The method was applied to the analysis of water samples treated under different disinfection processes and the results were compared with those from a liquid-liquid extraction method.

  20. Discharges of produced waters from oil and gas extraction via wastewater treatment plants are sources of disinfection by-products to receiving streams.

    Science.gov (United States)

    Hladik, Michelle L; Focazio, Michael J; Engle, Mark

    2014-01-01

    Fluids co-produced with oil and gas production (produced waters) are often brines that contain elevated concentrations of bromide. Bromide is an important precursor of several toxic disinfection by-products (DBPs) and the treatment of produced water may lead to more brominated DBPs. To determine if wastewater treatment plants that accept produced waters discharge greater amounts of brominated DBPs, water samples were collected in Pennsylvania from four sites along a large river including an upstream site, a site below a publicly owned wastewater treatment plant (POTW) outfall (does not accept produced water), a site below an oil and gas commercial wastewater treatment plant (CWT) outfall, and downstream of the POTW and CWT. Of 29 DBPs analyzed, the site at the POTW outfall had the highest number detected (six) ranging in concentration from 0.01 to 0.09 μg L(-1) with a similar mixture of DBPs that have been detected at POTW outfalls elsewhere in the United States. The DBP profile at the CWT outfall was much different, although only two DBPs, dibromochloronitromethane (DBCNM) and chloroform, were detected, DBCNM was found at relatively high concentrations (up to 8.5 μg L(-1)). The water at the CWT outfall also had a mixture of inorganic and organic precursors including elevated concentrations of bromide (75 mg L(-1)) and other organic DBP precursors (phenol at 15 μg L(-1)). To corroborate these DBP results, samples were collected in Pennsylvania from additional POTW and CWT outfalls that accept produced waters. The additional CWT also had high concentrations of DBCNM (3.1 μg L(-1)) while the POTWs that accept produced waters had elevated numbers (up to 15) and concentrations of DBPs, especially brominated and iodinated THMs (up to 12 μg L(-1) total THM concentration). Therefore, produced water brines that have been disinfected are potential sources of DBPs along with DBP precursors to streams wherever these wastewaters are discharged.

  1. Discharges of produced waters from oil and gas extraction via wastewater treatment plants are sources of disinfection by-products to receiving streams

    Science.gov (United States)

    Hladik, Michelle L.; Focazio, Michael J.; Engle, Mark

    2014-01-01

    Fluids co-produced with oil and gas production (produced waters) are often brines that contain elevated concentrations of bromide. Bromide is an important precursor of several toxic disinfection by-products (DBPs) and the treatment of produced water may lead to more brominated DBPs. To determine if wastewater treatment plants that accept produced waters discharge greater amounts of brominated DBPs, water samples were collected in Pennsylvania from four sites along a large river including an upstream site, a site below a publicly owned wastewater treatment plant (POTW) outfall (does not accept produced water), a site below an oil and gas commercial wastewater treatment plant (CWT) outfall, and downstream of the POTW and CWT. Of 29 DBPs analyzed, the site at the POTW outfall had the highest number detected (six) ranging in concentration from 0.01 to 0.09 μg L− 1 with a similar mixture of DBPs that have been detected at POTW outfalls elsewhere in the United States. The DBP profile at the CWT outfall was much different, although only two DBPs, dibromochloronitromethane (DBCNM) and chloroform, were detected, DBCNM was found at relatively high concentrations (up to 8.5 μg L− 1). The water at the CWT outfall also had a mixture of inorganic and organic precursors including elevated concentrations of bromide (75 mg L− 1) and other organic DBP precursors (phenol at 15 μg L− 1). To corroborate these DBP results, samples were collected in Pennsylvania from additional POTW and CWT outfalls that accept produced waters. The additional CWT also had high concentrations of DBCNM (3.1 μg L− 1) while the POTWs that accept produced waters had elevated numbers (up to 15) and concentrations of DBPs, especially brominated and iodinated THMs (up to 12 μg L− 1 total THM concentration). Therefore, produced water brines that have been disinfected are potential sources of DBPs along with DBP precursors to streams wherever these wastewaters are discharged.

  2. Identifying unknown by-products in drinking water using comprehensive two-dimensional gas chromatography-quadrupole mass spectrometry and in silico toxicity assessment.

    Science.gov (United States)

    Li, Chunmei; Wang, Donghong; Li, Na; Luo, Qian; Xu, Xiong; Wang, Zijian

    2016-11-01

    Improvements in extraction and detection technologies have increased our abilities to identify new disinfection by-products (DBPs) over the last 40 years. However, most previous studies combined DBP identification and measurement efforts with toxicology to address concerns on a few expected DBPs, making it difficult to better define the health risk from the individual DBPs. In this study, a nontargeted screening method involving comprehensive two-dimensional gas chromatography-quadrupole mass spectrometry (GC × GC-qMS) combined with OECD QSAR Toolbox Ver. 3.2 was developed for identifying and prioritizing of volatile and semi-volatile DBPs in drinking water. The method was successfully applied to analyze DBPs formed during chlorination, chloramination or ozonation of the raw water. Over 500 compounds were tentatively identified in each sample, showing the superior performance of this analytical technique. A total of 170 volatile and semi-volatile DBPs representing fourteen chemical classes were then identified, according to the criteria that the DBP was presented in the duplicate treated samples. The genotoxicity and carcinogenicity of the DBPs were evaluated using Toolbox, and 58 DBPs were found to be actual or potential genotoxicants. The accuracy of the compound identification was determined by comparing 47 identified compounds with commercially available standards. About 90% (41 of the 47) of the compounds that were automatically identified using the library were correct. The results show that GC×GC-qMS coupled with a quantitative structure-activity relationship model is a powerful and fast nontargeted screening technique for compounds. The method and results provide us a new idea for identification and prioritization of DBPs.

  3. The Effect of Flue Gas Desulphurization By-product and Grass Application on Alkali Soil Improvement%脱硫废弃物和耐盐牧草对碱化土壤的改良效果

    Institute of Scientific and Technical Information of China (English)

    沈艳; 谢应忠; 兰剑; 李培富

    2011-01-01

    利用田间定位试验,研究脱硫废弃物和耐盐牧草对土壤盐分的影响,同时研究脱硫废弃物对几种牧草生产性能的影响,探讨脱硫废弃物和耐盐牧草对碱性盐土的改良效果.结果表明,脱硫废弃物和耐盐牧草对碱性土壤0~20 cm土层的ESP、pH、代换性Na+含量均有降低作用;同时也降低(HCO3-+CO3~2-)含量、一价阳离子(K+ + Na+)含量,使土壤物理和化学性质改善,有利于植物的生长,增加产量.%The improved effects of flue gas desulphurization by-product and grass on alkali soil was explored to offers reference for improving alkali soil and choosing salt tolerance grass varietis. The field location test was used to analyze the effects of flue gas desulphurization by-product on soil salinity and performance trait of several grass varities. The results showed that by-product of flue gas desulphurization and grass made a reduction in exchangable sodium percentage, pH, the content of (K++Na+ )and (HCO3 - + CO3 2- ) , exchange amount of Na+ on alkali soil, and improved physical and chemical properties. They all increase the fresh grass yeild. The by-product of flue gas desulphurization and salt tolerance grass are recommended in improving alkali soil.

  4. Assessment of fresh groundwater vulnerability to contamination caused by production operations in oil and gas fields of Nizhnevartovsk Region (Western Siberia)

    Science.gov (United States)

    Bespalova, Yu V.; Matusevich, V. M.; Popov, V. K.; Kuzevanov, K. I.

    2016-09-01

    Groundwater quality is possible to provide under the condition of aquifers effective protection from surface contamination and bottom pollution prevention in the areas of intense oil-gas production operations. Qualitative and quantitative assessment of groundwater vulnerability is based on regional characteristics of lithological composition and thickness of impermeable deposits in unsaturated zone and overlying deposits. The correlation of head and water table levels, absorption capacity of soils and clay rocks are also considered. An integrated approach to natural vulnerability analysis of groundwater has been presented. It suggests a combination of three most common methods. Based on performed calculations, the map has been made to plot fresh groundwater vulnerability of Atlym-Novomikhailovsk aquifer system (Nizhnevaryovsk Region, Khanty-Mansiysk Autonomus Okrug).

  5. Simultaneous determination of polycyclic aromatic hydrocarbons and their chlorination by-products in drinking water and the coatings of water pipes by automated solid-phase microextraction followed by gas chromatography-mass spectrometry.

    Science.gov (United States)

    Tillner, Jocelyn; Hollard, Caroline; Bach, Cristina; Rosin, Christophe; Munoz, Jean-François; Dauchy, Xavier

    2013-11-08

    In this study, an automated method for the simultaneous determination of polycyclic aromatic hydrocarbons (PAHs) and their chlorination by-products in drinking water was developed based on online solid-phase microextraction-gas chromatography-mass spectrometry. The main focus was the optimisation of the solid-phase microextraction step. The influence of the agitation rate, type of fibre, desorption time, extraction time, extraction temperature, desorption temperature, and solvent addition was examined. The method was developed and validated using a mixture of 17 PAHs, 11 potential chlorination by-products (chlorinated and oxidised PAHs) and 6 deuterated standards. The limit of quantification was 10 ng/L for all target compounds. The validated method was used to analyse drinking water samples from three different drinking water distribution networks and the presumably coal tar-based pipe coatings of two pipe sections. A number of PAHs were detected in all three networks although individual compositions varied. Several PAH chlorination by-products (anthraquinone, fluorenone, cyclopenta[d,e,f]phenanthrenone, 3-chlorofluoranthene, and 1-chloropyrene) were also found, their presence correlating closely with that of their respective parent compounds. Their concentrations were always below 100 ng/L. In the coatings, all PAHs targeted were detected although concentrations varied between the two coatings (76-12,635 mg/kg and 12-6295 mg/kg, respectively). A number of chlorination by-products (anthraquinone, fluorenone, cyclopenta[d,e,f]phenanthrenone, 3-chlorofluoranthene, and 1-chloropyrene) were also detected (from 40 to 985 mg/kg), suggesting that the reaction of PAHs with disinfectant agents takes place in the coatings and not in the water phase after migration.

  6. Environmental analysis for pipeline gas demonstration plants

    Energy Technology Data Exchange (ETDEWEB)

    Stinton, L.H.

    1978-09-01

    The Department of Energy (DOE) has implemented programs for encouraging the development and commercialization of coal-related technologies, which include coal gasification demonstration-scale activities. In support of commercialization activities the Environmental Analysis for Pipeline Gas Demonstration Plants has been prepared as a reference document to be used in evaluating potential environmental and socioeconomic effects from construction and operation of site- and process-specific projects. Effluents and associated impacts are identified for six coal gasification processes at three contrasting settings. In general, impacts from construction of a high-Btu gas demonstration plant are similar to those caused by the construction of any chemical plant of similar size. The operation of a high-Btu gas demonstration plant, however, has several unique aspects that differentiate it from other chemical plants. Offsite development (surface mining) and disposal of large quantities of waste solids constitute important sources of potential impact. In addition, air emissions require monitoring for trace metals, polycyclic aromatic hydrocarbons, phenols, and other emissions. Potential biological impacts from long-term exposure to these emissions are unknown, and additional research and data analysis may be necessary to determine such effects. Possible effects of pollutants on vegetation and human populations are discussed. The occurrence of chemical contaminants in liquid effluents and the bioaccumulation of these contaminants in aquatic organisms may lead to adverse ecological impact. Socioeconomic impacts are similar to those from a chemical plant of equivalent size and are summarized and contrasted for the three surrogate sites.

  7. Feasibility of producing jet fuel from GPGP (Great Plains Gasification Plant) by-products

    Energy Technology Data Exchange (ETDEWEB)

    Willson, W.G.; Knudson, C.L.; Rindt, J.R.

    1987-01-01

    The Great Plains Gasification Plant (GPGP) in Beulah, North Dakota, is in close proximity to several Air Force bases along our northern tier. This plant is producing over 137 million cubic feet per day high-Btu SNG from North Dakota lignite. In addition, the plant generates three liquid streams, naphtha, crude phenol, and tar oil. The naphtha may be directly marketable because of its low boiling point and high aromatic content. The other two streams, totalling about 4300 barrels per day, are available as potential sources of aviation jet fuel for the Air Force. The overall objective of this project is to assess the technical and economic feasibility of producing aviation turbine fuel from the by-product streams of GPGP. These streams, as well as fractions thereof, will be characterized and subsequently processed over a wide range of process conditions. The resulting turbine fuel products will be analyzed to determine their chemical and physical characteristics as compared to petroleum-based fuels to meet the military specification requirements. A second objective is to assess the conversion of the by-product streams into a new, higher-density aviation fuel. Since no performance specifications currently exist for a high-density jet fuel, reaction products and intermediates will only be characterized to indicate the feasibility of producing such a fuel. This report describes results on feedstock characterization. 6 figs., 5 tabs.

  8. Synthesis gas demonstration plant program, Phase I. Trade-off study VI, by-product sales analysis. Part 1. Sulfur recovery system. Part 2. Carbon dioxide, fly ash, bottom ash and slag

    Energy Technology Data Exchange (ETDEWEB)

    1979-03-01

    The objectives of this study were to develop and analyze information to facilitate decision making in regard to by-products from the Commercial Plant. Part 1 of the study investigated the alternative marketing and commercial advantages of producing elemental sulfur or sulfuric acid, the findings to be used with results of a technical and economic analysis to determine the relative desirability of choosing either as a by-product. The principal commercial and marketing input for this portion of the study were provided by review of authoritative published material and by personnel interviews with government, trade association and commercial information sources, including a limited number of major consumers and producers. Compilation and analysis of statistical data and knowledgeable opinions on the following were included: production and consumption trends and future outlook; levels of current and expected future prices; end-use trends and outlook for new uses; geographic consumption patterns; export market and outlook for foreign sales; and other factors related to the present and future supply and demand and effective marketing of the by-products. Technical data were obtained from the commercial suppliers of the processes involved, supplemented by information from producers of the by-products under consideration. The predicted composition and quantity of all gaseous waste streams were used for investigation of by-product potential. Capital investment and operating costs to produce the saleable by-products investigated were developed for each production alternative considered. Operating profits were determined and comparative figures were calculated for net cash flow and return on investment.

  9. Waste/By-Product Hydrogen

    Science.gov (United States)

    2011-01-13

    By‐ product Hydrogen Fuel Flexibility Biogas : generated from organic waste �Wastewater treatment plants can provide multiple MW of renewable... Waste /By product Hydrogen Waste H2 sources include: � Waste bio‐mass: biogas to high temp fuel cells to produce H2 – there are over two dozen sites...13 Waste /By product Hydrogen ‐ Biogas

  10. Microbial reduction of SO[sub 2] and NO[sub x] as a means of by- product recovery/disposal from regenerable processes for the desulfurization of flue gas

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1992-01-01

    Based on the work described simultaneous SO[sub 2]/No[sub x] removal from flue gas based on direct contact of the gas with SRB and T. denitrificans co-cultures or cultures-in-series has been eliminated as a viable process concept at this time. The technical reasons are as follows: (1) NO inhibition of SO[sub 2] reduction by D. desulfuricans - Although the NO concentrations used in the experiments described above are somewhat higher than that found in a typical flue gas, it is quite possible that at lower NO concentrations (or partial pressures) the inhibiting effects will simply take longer to become apparent. (2) Nitrate suppression of NO removal - As noted previously, the cultivation of T. denitrificans in a microbial flue gas treatment system (either one or two stages) would require sulfide-limiting conditions. Therefore, the electron acceptor must be in excess, requiring nitrate in the T. denitrificans process culture. As shown in experiments described above, nitrate significantly suppresses the removal of NO from a feed gas making simultaneous SO[sub 2]/NO[sub x] removal impractical by microbial means. (3) O[sub 2] inhibition of SO[sub 2] and NO reduction - It has been demonstrated that D. desulfuricans working cultures are tolerant of up to 1.7% O[sub 2] in the feed gas. However, further increases in the O[sub 2] partial pressure in the feed gas resulted in O[sub 2] inhibition of SO[sub 2] reduction. These inhibiting levels of O[sub 2] are comparable to those concentrations found in flue gases (3). Therefore, in any process in which raw flue gas contacts a D. desulfuricans culture marginal stability at best can be expected.

  11. Microbial reduction of SO{sub 2} and NO{sub x} as a means of by- product recovery/disposal from regenerable processes for the desulfurization of flue gas. Technical progress report, June 11, 1992--September 11, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1992-12-31

    Based on the work described simultaneous SO{sub 2}/No{sub x} removal from flue gas based on direct contact of the gas with SRB and T. denitrificans co-cultures or cultures-in-series has been eliminated as a viable process concept at this time. The technical reasons are as follows: (1) NO inhibition of SO{sub 2} reduction by D. desulfuricans - Although the NO concentrations used in the experiments described above are somewhat higher than that found in a typical flue gas, it is quite possible that at lower NO concentrations (or partial pressures) the inhibiting effects will simply take longer to become apparent. (2) Nitrate suppression of NO removal - As noted previously, the cultivation of T. denitrificans in a microbial flue gas treatment system (either one or two stages) would require sulfide-limiting conditions. Therefore, the electron acceptor must be in excess, requiring nitrate in the T. denitrificans process culture. As shown in experiments described above, nitrate significantly suppresses the removal of NO from a feed gas making simultaneous SO{sub 2}/NO{sub x} removal impractical by microbial means. (3) O{sub 2} inhibition of SO{sub 2} and NO reduction - It has been demonstrated that D. desulfuricans working cultures are tolerant of up to 1.7% O{sub 2} in the feed gas. However, further increases in the O{sub 2} partial pressure in the feed gas resulted in O{sub 2} inhibition of SO{sub 2} reduction. These inhibiting levels of O{sub 2} are comparable to those concentrations found in flue gases (3). Therefore, in any process in which raw flue gas contacts a D. desulfuricans culture marginal stability at best can be expected.

  12. Digestion kinetics of carbohydrate fractions of citrus by-products.

    Science.gov (United States)

    Lashkari, Saman; Taghizadeh, Akbar

    2015-01-01

    The present experiment was carried out to determine the digestion kinetics of carbohydrate fractions of citrus by-products. Grapefruit pulp (GP), lemon pulp (LE), lime pulp (LI) and orange pulp (OP) were the test feed. Digestion kinetic of whole citrus by-products and neutral detergent fiber (NDF) fraction and acid detergent fiber (ADF) fractions of citrus by-products were measured using the in vitro gas production technique. Fermentation kinetics of the neutral detergent soluble carbohydrates (NDSC) fraction and hemicelluloses were calculated using a curve subtraction. The fermentation rate of whole was the highest for the LE (p fractions. There was no significant difference among potential gas production (A) volumes of whole test feeds (p fractions of citrus by-products have high potential for degradability. It could also be concluded that carbohydrate fractions of citrus by-products have remarkable difference in digestion kinetics and digestive behavior.

  13. Microbial reduction of SO{sub 2} and NO{sub x} as a means of by-product recovery/disposal from regenerable processes for the desulfurization of flue gas. Technical progress report, December 11, 1992--March 11, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1993-12-31

    This report describes the potential of sulfate reducing bacteria to fix sulfur derived from flue gas desulfurization. The first section reviews the problem, the second section reviews progress of this study to use desulfovibrio desulfuricans for this purpose. The final section related progress during the current reporting period. This latter section describes studies to immobilize the bacteria in co-culture with floc-forming anaerobes, use of sewage sludges in the culture media, and sulfate production from sulfur dioxide.

  14. Microbial reduction of SO{sub 2} and NO{sub x} as a means of by-product recovery/disposal from regenerable processes for the desulfurization of flue gas. Technical progress report, March 11, 1993--June 11, 1993

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1993-11-01

    There are two basic approaches to addressing the problem of SO{sub 2} and NO{sub x} emissions: (1) desulfurize (and denitrogenate) the feedstock prior to or during combustion; or (2) scrub the resultant SO{sub 2} and oxides of nitrogen from the boiler flue gases. The flue gas processing alternative has been addressed in this project via microbial reduction of SO{sub 2} and NO{sub x} by sulfate-reducing bacteria

  15. Study on the Effect of Amelioration of Saline-sodic Soil with the By-product of Flue Gas Desulphurization (BFGD) to Plant Elaeagnus angustifolia L%燃煤烟气脱硫废弃物改良土壤种植沙枣效果研究

    Institute of Scientific and Technical Information of China (English)

    王静; 孙兆军; 张浩; 李茜; 李明

    2011-01-01

    为了有效利用燃煤烟气脱硫废弃物(简称脱硫废弃物),探究沙枣作为改良盐碱地先锋树种的可行性.采用大田试验的方法,从土壤pH、全盐含量、碱化度(ESP)和常见离子相对含量的变化等方面,研究了脱硫废弃物改良后龟裂碱土种植沙枣的效果.结果表明:随着林木生长时间的延长,脱硫废弃物改良后的土壤pH、可溶性盐和碱化度(ESP)均有不同程度降低,pH、可溶性盐和碱化度(ESP)分别由初始的9.50、46 g/kg和5.3%下降到8.31、11.4 g/kg和3.1%;脱硫废弃物改良土壤种植沙枣,且达到3年,土壤的改良效果最为明显.以上结果表明,脱硫废弃物可有效降低土壤中交换性钠、交换性镁的相对含量,降低其对植物的毒害作用,改善土壤化学性质,从而有利于林木的生长和发育.%In order to effectively use the by-product of flue gas desulphurization (BFGD) and probe into the feasibility of plant Elaeagnus angustifolia L. As amelioration of saline-sodic soil pioneer species, the author used field experiment to study the effect of amelioration of saline-sodic soil with the by-product of flue gas desulphurization (BFGD) to plant Elaeagnus angustifolia L. The soil pH value, total salt content, degree of alkalization and the change of ion relative content were measured to study the effect of amelioration of saline-sodic soil with the by-product of flue gas desulphurization (BFGD) to plant Elaeagnus angustifolia L. The results showed that: with the growth time of grove and grass extending, the soil pH value, total salt content, degree of alkalization and the change of ion relative content of the amelioration of saline-sodic soil with the by-product of flue gas desulphurization (BFGD) had declined in some extent. The soil pH value, total salt content and degree of alkalization (ESP) respectively decreased from 9.50, 46 g/kg and 5.3% to 8.31, 11.4 g/kg and 3.1%; In the third year, the by-product of flue gas

  16. Microbial reduction of SO{sub 2} and NO{sub x} as a means of by-product recovery/disposal from regenerable processes for the desulfurization of flue gas. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1994-03-01

    The main objective of this research was to investigate microorganisms capable of fossil fuel flue gas desulfurization and denitrification. The study used municipal sewage sludge as a carbon and energy source for SO{sub 2}-reducing cultures. The individual tasks developed a consortium of sulfate-reducing bacteria, investigated the design parameters for a continuous process, preformed a cost analysis, and screened sulfate-reducing bacteria. In the investigation of microbial reduction of NO{sub x} to nitrogen, tasks included screening denitrifying bacteria for NO and NO{sub 2} activity, developing optimum NO-reducing cultures, and investigating design parameters for a continuous system. This final report reviews the work previous to the current project, describes project objectives and the specific work plan, and reports results from the work completed during the previous reporting periods.

  17. 油气副产H_2S的脱除与应用%The Removing and Application of by-product H_2S from Petroleum and Natural Gas

    Institute of Scientific and Technical Information of China (English)

    周英; 刘宝生; 郎春燕; 陈小平

    2012-01-01

    Hydrogen sulfide is a mephitical gas,which exists widely in petroleum or natural gas exploration and mining,processing and post-treatment each link.It possesses strong corrosive and poisonous property.It threatens to the safety of human,causes the corrosion of the drilling equipment,and pollutes the drilling fluid,etc.But hydrogen sulfide can be used for deep processing to many valuable products.The paper introduces three industrial methods of the removal of hydrogen sulfide: Chemical method,Physical method,and Biological method.The hydrogen sulfide downstream products' development,application and the latest research progress are also described in the paper.China has a wealth of hydrogen sulfide resources,and vigorously developing its subsequent products has very broad prospects for development in future.%硫化氢是具有恶臭气味的气体,它广泛存在于油气勘探、开采、加工以及后处理等各个环节。它具有强烈的腐蚀性和剧毒性,危害人身安全、腐蚀油气设备和污染钻井液等。但是硫化氢可以深加工为许多极具价值的产品。文章介绍了脱除硫化氢的三种工业方法:化学法、物理法、生物法。论述了硫化氢下游产品的开发、应用及最新研究进展。我国具有丰富的硫化氢资源,大力开发硫化氢后续产品是今后发展的一个方向。

  18. Microbial reduction of SO{sub 2} and NO{sub x} as a means of by-product recovery/disposal from regenerable processes for the desulfurization of flue gas. Technical progress report, September 11, 1992--December 11, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Sublette, K.L.

    1992-12-31

    With the continual increase in the utilization of high sulfur and high nitrogen containing fossil fuels, the release of airborne pollutants into the environment has become a critical problem. The fuel sulfur is converted to SO{sub 2} during combustion. Fuel nitrogen and a fraction of the nitrogen from the combustion air are converted to nitric oxide and nitrogen dioxide, NO{sub x}. For the past five years Combustion Engineering (now Asea Brown Boveri or ABB) and, since 1986, the University of Tulsa (TU) have been investigating the oxidation of H{sub 2}S by the facultatively anaerobic and autotrophic bacterium Thiobacillus denitrificans and have developed a process, concept for the microbial removal of H{sub 2}S from a gas stream the simultaneous removal of SO{sub 2} and NO by D. desulfuricans and T. denitrificans co-cultures and cultures-in-series was demonstrated. These systems could not be sustained due to NO inhibition of D. desulfuricans. However, a preliminary economic analysis has shown that microbial reduction of SO{sub 2} to H{sub 2}S with subsequent conversion to elemental sulfur by the Claus process is both technically and economically feasible if a less expensive carbon and/or energy source can be found. It has also been demonstrated that T. denitrificans can be grown anaerobically on NO(g) as a terminal electron acceptor with reduction to elemental nitrogen. Microbial reduction of NO{sub x} is a viable process concept for the disposal of concentrated streams of NO{sub x} as may be produced by certain regenerable processes for the removal of SO{sub 2} and NO{sub x} from flue gas.

  19. Design, develop, and manufacture process gas lubricated hot recycle gas circulators. Final technical report, MTI--77TR5

    Energy Technology Data Exchange (ETDEWEB)

    Dominy, D.G.; Hurley, J.D.

    1976-10-01

    In the SYNTHANE coal gasification process raw product gas of approximately 35 mole % methane is passed through a methanator which increases the methane content (and heating value) to approximately 86 mole % methane. The reaction is highly exothermic. In order to limit the temperature rise of the reaction, high BTU methane process gas is diluted with raw product gas. A pressure increase is necessary to force the mixed gases back into the methanator. In addition, varying recycle ratios affect the total flow of the gas stream necessitating a compressor or other device to operate at varying flow capacities. The present hot gas recycle methanator system utilized an eductor to mix and raise the pressure of the product gas. This method has limitations. The pressure rise is small, in the order of 1/2 psig, and the eductor does not allow proper mixing pressures and temperatures if the flow conditions are changed. An eductor is useful for this purpose only in a pilot plant and represents an expedient solution to the problem. For commercial use a compressor is essential.

  20. Advanced Gasification By-Product Utilization

    Energy Technology Data Exchange (ETDEWEB)

    Rodney Andrews; Aurora Rubel; Jack Groppo; Ari Geertsema; Frank Huggins; M. Mercedes Maroto-Valer; Brandie M. Markley; Harold Schobert

    2006-02-01

    With the recent passing of new legislation designed to permanently cap and reduce mercury emissions from coal-fired utilities, it is more important than ever to develop and improve upon methods of controlling mercury emissions. One promising technique is carbon sorbent injection into the flue gas of the coal-fired power plant. Currently, this technology is very expensive as costly commercially activated carbons are used as sorbents. There is also a significant lack of understanding of the interaction between mercury vapor and the carbon sorbent, which adds to the difficulty of predicting the amount of sorbent needed for specific plant configurations. Due to its inherent porosity and adsorption properties as well as on-site availability, carbons derived from gasifiers are potential mercury sorbent candidates. Furthermore, because of the increasing restricted use of landfilling, the coal industry is very interested in finding uses for these materials as an alternative to the current disposal practice. The results of laboratory investigations and supporting technical assessments conducted under DOE Subcontract No. DE-FG26-03NT41795 are reported for the period September 1, 2004 to August 31, 2005. This contract is with the University of Kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Research and The Pennsylvania State University Energy Institute. The worked described was part of a project entitled ''Advanced Gasification By-Product Utilization''. This work involves the development of technologies for the separation and characterization of coal gasification slags from operating gasification units, activation of these materials to increase mercury and nitrogen oxide capture efficiency, assessment of these materials as sorbents for mercury and nitrogen oxides, and characterization of these materials for use as polymer fillers.

  1. Advanced Gasification By-Product Utilization

    Energy Technology Data Exchange (ETDEWEB)

    Rodney Andrews; Aurora Rubel; Jack Groppo; Brock Marrs; Ari Geertsema; Frank Huggins; M. Mercedes Maroto-Valer; Brandie M. Markley; Zhe Lu; Harold Schobert

    2006-08-31

    With the passing of legislation designed to permanently cap and reduce mercury emissions from coal-fired utilities, it is more important than ever to develop and improve upon methods of controlling mercury emissions. One promising technique is carbon sorbent injection into the flue gas of the coal-fired power plant. Currently, this technology is very expensive as costly commercially activated carbons are used as sorbents. There is also a significant lack of understanding of the interaction between mercury vapor and the carbon sorbent, which adds to the difficulty of predicting the amount of sorbent needed for specific plant configurations. Due to its inherent porosity and adsorption properties as well as on-site availability, carbons derived from gasifiers are potential mercury sorbent candidates. Furthermore, because of the increasing restricted use of landfilling, the coal industry is very interested in finding uses for these materials as an alternative to the current disposal practice. The results of laboratory investigations and supporting technical assessments conducted under DOE Subcontract No. DE-FG26-03NT41795 are reported. This contract was with the University of Kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Research and The Pennsylvania State University Energy Institute. The worked described was part of a project entitled ''Advanced Gasification By-Product Utilization''. This work involved the development of technologies for the separation and characterization of coal gasification slags from operating gasification units, activation of these materials to increase mercury and nitrogen oxide capture efficiency, assessment of these materials as sorbents for mercury and nitrogen oxides, assessment of the potential for leaching of Hg captured by the carbons, analysis of the slags for cement applications, and characterization of these materials for use as polymer fillers. The

  2. Advanced Gasification By-Product Utilization

    Energy Technology Data Exchange (ETDEWEB)

    Rodney Andrews; Aurora Rubel; Jack Groppo; Brock Marrs; Ari Geertsema; Frank Huggins; M. Mercedes Maroto-Valer; Brandie M. Markley; Zhe Lu; Harold Schobert

    2006-08-31

    With the passing of legislation designed to permanently cap and reduce mercury emissions from coal-fired utilities, it is more important than ever to develop and improve upon methods of controlling mercury emissions. One promising technique is carbon sorbent injection into the flue gas of the coal-fired power plant. Currently, this technology is very expensive as costly commercially activated carbons are used as sorbents. There is also a significant lack of understanding of the interaction between mercury vapor and the carbon sorbent, which adds to the difficulty of predicting the amount of sorbent needed for specific plant configurations. Due to its inherent porosity and adsorption properties as well as on-site availability, carbons derived from gasifiers are potential mercury sorbent candidates. Furthermore, because of the increasing restricted use of landfilling, the coal industry is very interested in finding uses for these materials as an alternative to the current disposal practice. The results of laboratory investigations and supporting technical assessments conducted under DOE Subcontract No. DE-FG26-03NT41795 are reported. This contract was with the University of Kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Research and The Pennsylvania State University Energy Institute. The worked described was part of a project entitled ''Advanced Gasification By-Product Utilization''. This work involved the development of technologies for the separation and characterization of coal gasification slags from operating gasification units, activation of these materials to increase mercury and nitrogen oxide capture efficiency, assessment of these materials as sorbents for mercury and nitrogen oxides, assessment of the potential for leaching of Hg captured by the carbons, analysis of the slags for cement applications, and characterization of these materials for use as polymer fillers. The

  3. MULTISPECTRAL IDENTIFICATION OF CHLORINE DIOXIDE DISINFECTION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    This paper discusses the identification of organic disinfection by-products (DBPs) at a pilot plant in Evansville, Indiana, that uses chlorine dioxide as a primary disinfectant. nconventional multispectral identification techniques (gas chromatography combined with high and low r...

  4. MULTISPECTRAL IDENTIFICATION OF CHLORINE DIOXIDE DISINFECTION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    This paper discusses the identification of organic disinfection by-products (DBPs) at a pilot plant in Evansville, Indiana, that uses chlorine dioxide as a primary disinfectant. nconventional multispectral identification techniques (gas chromatography combined with high and low r...

  5. Anaerobic digestion of slaughterhouse by-products

    DEFF Research Database (Denmark)

    Hejnfelt, Anette; Angelidaki, Irini

    2009-01-01

    flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497,487, 561, 582, 575, 359, 619 dm(3) kg(-1) respectively, corresponding to 50-100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions......Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 degrees C and for some experiments also at 37 degrees C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone...

  6. Land application uses for dry FGD by-products

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W. (Ohio State Univ., Columbus, OH (United States)); Haefner, R. (Geological Survey, Columbus, OH (United States). Water Resources Div.)

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. Presently FGD by-product materials are treated as solid wastes and must be landfilled. However, landfill sites are becoming more scarce and tipping fees are constantly increasing. It is, therefore, highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. In summary Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD byproduct materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  7. Anaerobic digestion of slaughterhouse by-products

    Energy Technology Data Exchange (ETDEWEB)

    Hejnfelt, Anette; Angelidaki, Irini [Department of Environmental Engineering, Technical University of Denmark, DTU, Building 113, DK-2800 Kgs. Lyngby (Denmark)

    2009-08-15

    Anaerobic digestion of animal by-products was investigated in batch and semi-continuously fed, reactor experiments at 55 C and for some experiments also at 37 C. Separate or mixed by-products from pigs were tested. The methane potential measured by batch assays for meat- and bone flour, fat, blood, hair, meat, ribs, raw waste were: 225, 497, 487, 561, 582, 575, 359, 619 dm{sup 3} kg{sup -1} respectively, corresponding to 50-100% of the calculated theoretical methane potential. Dilution of the by-products had a positive effect on the specific methane yield with the highest dilutions giving the best results. High concentrations of long-chain fatty acids and ammonia in the by-products were found to inhibit the biogas process at concentrations higher than 5 g lipids dm{sup -3} and 7 g N dm{sup -3} respectively. Pretreatment (pasteurization: 70 C, sterilization: 133 C), and alkali hydrolysis (NaOH) had no effect on achieved methane yields. Mesophilic digestion was more stable than thermophilic digestion, and higher methane yield was noticed at high waste concentrations. The lower yield at thermophilic temperature and high waste concentration was due to ammonia inhibition. Co-digestion of 5% pork by-products mixed with pig manure at 37 C showed 40% higher methane production compared to digestion of manure alone. (author)

  8. Cements containing by-product gypsum

    Energy Technology Data Exchange (ETDEWEB)

    Bensted, J. [University of Greenwich, London (United Kingdom). School of Biological and Chemical Sciences

    1995-12-31

    Chemical by-product gypsum can readily replace natural gypsum in Portland cements and in blended cements like Portland pfa cement and Portland blast furnace cement without technical detriment in many instances. Indeed, sometimes the technical performance of the cement can be enhanced. The hydration chemistry is often changed, in that where there is at least some retardation of setting, more AFT phase (ettringite) is formed during early hydration at the expense of calcium silicate hydrates. By-product gypsum can also replace natural gypsum in speciality products like calcium aluminate cement-Portland cement mixes for producing quick setting cements and in calcium sulphoaluminate-type expansive cements. However, by-products gypsum have proved to be less successful for utilization in API Classes of oilwell cements, because of the greater difficulty in obtaining batch-to-batch consistency in properties like thickening time and slurry rheology. 11 refs., 3 figs., 5 tabs.

  9. Torrefaction of agricultural by-products (abstract)

    Science.gov (United States)

    Torrefaction of biomass involves heating at 200°C-300°C under inert atmosphere to remove volatiles and produce materials with higher energy values and low moisture. Agricultural by-products, such as apple, grape, olive, and tomato pomaces as well as almond and walnut shells, were torrefied at differ...

  10. Valorization of rapeseed grain by-products

    Directory of Open Access Journals (Sweden)

    Kormanjos Sandor M.

    2016-01-01

    Full Text Available After technological processing of rapeseed significant amounts of useful and useless waste products stand out. The aim of the present study was to investigate the chemical composition, content of glucosinolates, microbiological safety, and presence of mycotoxins and heavy element contents of useful rapeseed by-products which are intended for animal nutrition. Feed components as well as complete mixtures for animal feed must be safe and in accordance with the requirements of the current national regulation. The investigated useful by-products contained significant amounts of proteins (21.80% and fat (33.78%. As a part of the research, extrusion of the mixture containing rapeseed by-products and maize in the ratio of 50:50% was performed. The process of extrusion was carried out at 130 °C. Based on the obtained results it was noticed that the investigated extruded mixture is a convenient protein-energy supplement suitable for animal feed production with significantly reduced glucosinolate content (from 10.30 to 7.82 µmol/g. It was also observed that the extrusion of feed mixture led to the reduction of the number of microorganisms which ensures safe feedstuff for animal feed production.

  11. ADVANCED GASIFICATION BY-PRODUCT UTILIZATION

    Energy Technology Data Exchange (ETDEWEB)

    Rodney Andrews; Aurora Rubel; Jack Groppo; Ari Geertsema; M. Mercedes Maroto-Valer; Zhe Lu; Harold Schobert

    2005-04-01

    The results of laboratory investigations and supporting technical assessments conducted under DOE Subcontract No. DE-FG26-03NT41795 are reported for the period September 1, 2003 to August 31, 2004. This contract is with the University of Kentucky Research Foundation, which supports work with the University of Kentucky Center for Applied Energy Research and The Pennsylvania State University Energy Institute. The worked described was part of a project entitled ''Advanced Gasification By-Product Utilization''. This work involves the development of technologies for the separation and characterization of coal gasification slags from operating gasification units, activation of these materials to increase mercury and nitrogen oxide capture efficiency, assessment of these materials as sorbents for mercury and nitrogen oxides, and characterization of these materials for use as polymer fillers.

  12. Environment protection in the area of by-products facilities in coking plant

    Energy Technology Data Exchange (ETDEWEB)

    Stefan Tomal; Henryk Zembala; Krzysztof Kalinowski; Milan Fedorov; Ludovt Kosnac; Jan Hromiak [Biuro Projektow Koksoprojekt Sp. z o.o., Zabrze (Poland)

    2004-07-01

    20 slides/overheads outline the presentation on the subject of the environmental protection program implemented at the U.S. Steel Kosice Coking Plant. Actions taken include the control of emissions by a system of cooling coke oven gas. A hermetically sealed system uses nitrogen flow for tar management and hermetic loading of the liquid coal by-product Benzol.

  13. Assessment of Anti-nutritive Activity of Tannins in Tea By-products Based on Rumen Fermentation

    Directory of Open Access Journals (Sweden)

    Makoto Kondo

    2014-11-01

    Full Text Available Nutritive values of green and black tea by-products and anti-nutritive activity of their tannins were evaluated in an in vitro rumen fermentation using various molecular weights of polyethylene glycols (PEG, polyvinyl pyrrolidone (PVP and polyvinyl polypyrrolidone as tannin-binding agents. Significant improvement in gas production by addition of PEG4000, 6000 and 20000 and PVP was observed only from black tea by-product, but not from green tea by-product. All tannin binding agents increased NH3-N concentration from both green and black tea by-products in the fermentation medium, and the PEG6000 and 20000 showed relatively higher improvement in the NH3-N concentration. The PEG6000 and 20000 also improved in vitro organic matter digestibility and metabolizable energy contents of both tea by-products. It was concluded that high molecular PEG would be suitable to assess the suppressive activity of tannins in tea by-products by in vitro fermentation. Higher responses to gas production and NH3-N concentration from black tea by-product than green tea by-product due to PEG indicate that tannins in black tea by-product could suppress rumen fermentation more strongly than that in green tea by-product.

  14. Oilfield Flare Gas Electricity Systems (OFFGASES Project)

    Energy Technology Data Exchange (ETDEWEB)

    Rachel Henderson; Robert Fickes

    2007-12-31

    The Oilfield Flare Gas Electricity Systems (OFFGASES) project was developed in response to a cooperative agreement offering by the U.S. Department of Energy (DOE) and the National Energy Technology Laboratory (NETL) under Preferred Upstream Management Projects (PUMP III). Project partners included the Interstate Oil and Gas Compact Commission (IOGCC) as lead agency working with the California Energy Commission (CEC) and the California Oil Producers Electric Cooperative (COPE). The project was designed to demonstrate that the entire range of oilfield 'stranded gases' (gas production that can not be delivered to a commercial market because it is poor quality, or the quantity is too small to be economically sold, or there are no pipeline facilities to transport it to market) can be cost-effectively harnessed to make electricity. The utilization of existing, proven distribution generation (DG) technologies to generate electricity was field-tested successfully at four marginal well sites, selected to cover a variety of potential scenarios: high Btu, medium Btu, ultra-low Btu gas, as well as a 'harsh', or high contaminant, gas. Two of the four sites for the OFFGASES project were idle wells that were shut in because of a lack of viable solutions for the stranded noncommercial gas that they produced. Converting stranded gas to useable electrical energy eliminates a waste stream that has potential negative environmental impacts to the oil production operation. The electricity produced will offset that which normally would be purchased from an electric utility, potentially lowering operating costs and extending the economic life of the oil wells. Of the piloted sites, the most promising technologies to handle the range were microturbines that have very low emissions. One recently developed product, the Flex-Microturbine, has the potential to handle the entire range of oilfield gases. It is deployed at an oilfield near Santa Barbara to run on waste gas

  15. Sampling from stochastic reservoir models constrained by production data

    Energy Technology Data Exchange (ETDEWEB)

    Hegstad, Bjoern Kaare

    1997-12-31

    When a petroleum reservoir is evaluated, it is important to forecast future production of oil and gas and to assess forecast uncertainty. This is done by defining a stochastic model for the reservoir characteristics, generating realizations from this model and applying a fluid flow simulator to the realizations. The reservoir characteristics define the geometry of the reservoir, initial saturation, petrophysical properties etc. This thesis discusses how to generate realizations constrained by production data, that is to say, the realizations should reproduce the observed production history of the petroleum reservoir within the uncertainty of these data. The topics discussed are: (1) Theoretical framework, (2) History matching, forecasting and forecasting uncertainty, (3) A three-dimensional test case, (4) Modelling transmissibility multipliers by Markov random fields, (5) Up scaling, (6) The link between model parameters, well observations and production history in a simple test case, (7) Sampling the posterior using optimization in a hierarchical model, (8) A comparison of Rejection Sampling and Metropolis-Hastings algorithm, (9) Stochastic simulation and conditioning by annealing in reservoir description, and (10) Uncertainty assessment in history matching and forecasting. 139 refs., 85 figs., 1 tab.

  16. Studies on Disinfection By-Products and Drinking Water

    Science.gov (United States)

    Rostad, Colleen E.

    2007-01-01

    Drinking water is disinfected with chemicals to remove pathogens, such as Giardia and Cryptosproridium, and prevent waterborne diseases such as cholera and typhoid. During disinfection, by-products are formed at trace concentrations. Because some of these by-products are suspected carcinogens, drinking water utilities must maintain the effectiveness of the disinfection process while minimizing the formation of by-products.

  17. Natural gas; Gas Natural

    Energy Technology Data Exchange (ETDEWEB)

    Lopes, Carlos A.; Moraes, Claudia C.D. [Eletricidade de Sao Paulo S.A. (ELETROPAULO), Sao Paulo, SP (Brazil); Fonseca, Carlos H.F. [Centrais Eletricas de Santa Catarina S.A., Florianopolis, SC (Brazil); Silva, Clecio Fabricio da; Alves, Ricardo P. [Companhia Paranaense de Energia (COPEL), Curitiba, PR (Brazil); Sposito, Edivaldo Soares; Hulle, Lutero [Espirito Santo Centrais Eletricas S.A. (ESCELSA), Vitoria, ES (Brazil); S. Martins, Icaro da [Centrais Eletricas do Norte do Brasil S.A. (ELETRONORTE), Belem, PA (Brazil); Vilhena, Joao Luiz S. de [Companhia Energetica de Minas Gerais (CEMIG), Belo Horizonte, MG (Brazil); Fagundes, Zaluar Aquino [Companhia Estadual de Energia Eletrica do Estado do Rio Grande do Sul, Porto Alegre, RS (Brazil)

    1996-12-31

    An increase in the consumption of natural gas in Brazil is an expected fact in what concerns energetic planning. This work presents the existing situation in what concerns natural gas utilization in the main world economies, as well as an analysis of the participation of this fuel among the energy final consumption per sources. The Brazilian consumption of natural gas is also analysed as well as the international agreement between Brazil and Bolivia for natural gas commercialization. Some legal, institutional and political aspects related to natural gas commercialization are also discussed. Finally, several benefits to be brought by the utilization of natural gas are presented 10 refs., 3 tabs.

  18. Land application uses for dry FGD by-products. Phase 2 report

    Energy Technology Data Exchange (ETDEWEB)

    Stehouwer, R.; Dick, W.; Bigham, J. [Ohio State Univ., Columbus, OH (United States)] [and others

    1996-03-01

    A study was initiated in December 1990 to demonstrate large volume beneficial uses of flue gas desulfurization (FGD) by-products. A Phase 1 report provided results of an extensive characterization of chemical, physical, mineralogical and engineering properties of 58 dry FGD by-product samples. The Phase 1 report concluded that high volume beneficial reuses will depend on the economics related to their ability to substitute for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mine lands). Phase 2 objectives were (1) to conduct laboratory and greenhouse studies of FGD and soil (spoil) mixtures for agronomic and engineering applications, (2) to initiate field studies related to high volume agronomic and engineering uses, and (3) to develop the basic methodological framework for estimation of the financial and economic costs and benefits to society of several FGD reuse options and to make some preliminary runs of economic models. High volume beneficial reuses of dry FGD by-products have been successfully demonstrated. Adverse environmental impacts have been negligible. Although few sources of dry FGD by-products currently exist in Ohio and the United States there is potential for smaller coal-fired facilities to adopt S0{sub 2} scrubbing technologies that produce dry FGD material. Also much of what we have learned from studies on dry FGD by-products is applicable to the more prevalent wet FGD by-products. The adaptation of the technologies demonstrated in this project seem to be not only limited by economic constraints, but even more so, by the need to create awareness of the market potential of using these FGD by-products.

  19. Land application uses for dry FGD by-products, Phase 1 report

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W.

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. FGD by-product materials are treated as solid wastes and must be landfilled. It is highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. The results indicated the chemical composition of the FGD by-product materials were dominated by Ca, S, Al, and Si. Many of the elements regulated by the US Environmental Protection Agency reside primarily in the fly ash. Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD by-product materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  20. Natural gas shortage. [Review

    Energy Technology Data Exchange (ETDEWEB)

    Boorstin, D.

    1975-11-07

    Curtailments of gas supplies in the winter of 1975-76 were estimated to be 2.9 trillion cubic feet or 15 percent of demand, which represented a 45 percent increase over curtailments in 1974-75. The scarcities are discussed under the following topics: probable dimensions of natural gas curtailment; effects of winter shortages, possibility of relief; debate over attempt to remove price ceilings; and charges of gas withholding and underreporting. The history of gas use and regulation is reviewed under the following: from unwanted oil by-product to useful fuel; development of regulation and extent of control; and policy change at the Federal Power Commission. The outlook for overcoming the shortage is discussed under the following: revised estimates of undiscovered resources; rival proposals to make Alaskan gas available; and continuing search for substitute energy sources. 37 references. (MCW)

  1. Nitrous oxide and carbon dioxide emissions during initial decomposition of animal by-products applied as fertilisers to soils.

    NARCIS (Netherlands)

    Cayuela, M.L.; Velthof, G.L.; Mondini, C.; Sinicco, T.; Groenigen, van J.W.

    2010-01-01

    The recycling of organic wastes as soil amendments is notably promoted in sustainable agricultural systems. However, for many animal by-products approved by organic farming regulations little is known about their effects on the greenhouse gas balance of the soil, in particular on N2O emissions. In t

  2. By-products of palm oil extraction and refining

    Directory of Open Access Journals (Sweden)

    Tan Yew-Ai

    2006-01-01

    Full Text Available This paper outlines the utilisation of by-products resulting from the extraction and refining of palm oil. It summarises research by the Malaysian Palm Oil Board (MPOB directed at producing zero waste from the palm oil industry. MPOB regards by-products of the palm oil industry not as waste but resources. It will be evident that by-products from the palm oil industry can be and have been used extensively and that the research carried out is relevant to both the milling and refining sectors.

  3. IDENTIFICATION OF NEW DISINFECTION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Due to concern over the potential adverse health effects of trihalomethanes (THMs) and other chlorinated by-products in chlorinated drinking water, alternative disinfectants are being explored. Ozone, chlorine dioxide, and chloramine are popular alternatives, as they produce low...

  4. Wastes and by-products - alternatives for agricultural use

    Energy Technology Data Exchange (ETDEWEB)

    Boles, J.L.; Craft, D.J.; Parker, B.R.

    1994-10-01

    Top address a growing national problem with generation of wastes and by-products, TVA has been involved for several years with developing and commercializing environmentally responsible practices for eliminating, minimizing, or utilizing various wastes/by-products. In many cases, reducing waste generation is impractical, but the wastes/by-products can be converted into other environmentally sound products. In some instances, conversion of safe, value-added agricultural products in the best or only practical alternative. TVA is currently involved with a diversity of projects converting wastes/by-products into safe, economical, and agriculturally beneficial products. Environmental improvement projects have involved poultry litter, cellulosic wastes, used battery acid, ammonium sulfate fines, lead smelting effluents, deep-welled sulfuric acid/ammonium bisulfate solutions, wood ash, waste magnesium ammonium sulfate slurry from recording tape production, and ammunition plant waste sodium nitrate/ammonium nitrate streams.

  5. Formation and Occurrence of Disinfection By-Products

    Science.gov (United States)

    Disinfection by-products (DBPs) are formed when disinfectants such as chlorine, ozone, chlorine dioxide, or chloramines react with naturally occurring organic matter, anthropogenic contaminants, bromide, and iodide during the production of drinking water. There is concern about D...

  6. ANALYSIS OF BY-PRODUCTS MARKET IN RUSSIA

    Directory of Open Access Journals (Sweden)

    Keniyz N. V.

    2015-01-01

    Full Text Available Changing style of life, its rhythm and tendencies dictate their own conditions. The deficit of time makes us economize it on all, including the time for cooking. Among the main trends of the domestic meat market - switching consumers from frozen meat products to fresh cooled products. In connection with it the amount of consumers of meat semi-finished products grows. In the work there was considered the results of research of the Russian market of by-products. The market of frozen meat by-products is actively developed in large cities, where it has its own production. The participants of the market state that consumers have started to buy more frozen by-products by weight and the analysis of meat by-products assortment in retailing trade for 2014 testifies it. Trying to fasten their positions, operators of the market not only develop the production powers but work out new products and the analysis of dynamics of production volumes of meat by-products and shares of federal districts – producers of meat by-products testify it. The main players in this segment see the future market for complex, receipt, combined products and ready dishes that will lead to change of structure of meat semi-finished products sales

  7. Steam reforming of biodiesel by-product to make renewable hydrogen.

    Science.gov (United States)

    Slinn, Matthew; Kendall, Kevin; Mallon, Christian; Andrews, James

    2008-09-01

    The aim of this paper was to investigate the viability of steam reforming the combined glycerol and water by-product streams of a biodiesel plant. A platinum alumina catalyst was used to optimise the operating conditions for glycerol steam reforming and mass spectroscopy was chosen to measure reformer gas yield. The problem is that glycerol steam reforming is relatively untested even with pure glycerol and the by-product quality may be too poor. The strategy was therefore to optimise the process using pure glycerol and compare the performance with by-product glycerol. To test catalyst degradation caused by carbon deposition, a Solid Oxide fuel cell (SOFC) was used as a separate reformer and electrical performance was measured to indicate carbon deposition. This is the first time a SOFC has been run on glycerol. The results showed that thermodynamic theory can be used to predict reformer performance. At high temperatures high gas yield can be reached (almost 100%) and selectivities of 70% (dry basis) obtained. The optimum conditions for glycerol reforming were 860 degrees C temperature (maximum tested), 0.12 mols/min glycerol flow per kg of catalyst and 2.5 steam/carbon ratio. Reforming catalysts lasted for several days of continuous operation with minimal degradation, 0.4% of feed deposited. By-product glycerol performed slightly worse with a lower yield and more carbon deposition, 2% of feed. The results show that glycerol steam reforming is a viable alternative use for glycerol and potentially a better option than purification.

  8. Gas turbine

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ok Ryong

    2004-01-15

    This book introduces gas turbine cycle explaining general thing of gas turbine, full gas turbine cycle, Ericson cycle and Brayton cycle, practical gas turbine cycle without pressure loss, multiaxial type gas turbine cycle and special gas turbine cycle, application of basic theory on a study on suction-cooling gas turbine cycle with turbo-refrigerating machine using the bleed air, and general performance characteristics of the suction-cooling gas turbine cycle combined with absorption-type refrigerating machine.

  9. Decomposition of water into highly combustible hydroxyl gas used in ...

    African Journals Online (AJOL)

    Decomposition of water into highly combustible hydroxyl gas used in internal ... of alternative sources of energy that produce less amounts of carbon dioxide. ... The by-product obtained from combustion of this gas is water vapour and oxygen ...

  10. Use of clean coal technology by-products as agricultural liming techniques

    Energy Technology Data Exchange (ETDEWEB)

    Stehouwer, R.C.; Sutton, P.; Dick, W.A. [Ohio Agricultural Research and Development Center, Wooster, OH (United States). Dept. of Agronomy

    1995-03-01

    Dry flue gas desulfurization (FGD) by-products are mixtures of coal fly-ash, anhydrite (CaCO{sub 4}), and unspent lime- or limestone-based sorbent. Dry FGD by-products frequently have neutralizing values greater than 50% CaCO{sub 3} equivalency and thus have potential for neutralizing acidic soils. Owing to the presence of soluble salts and various trace elements, however, soil application of dry FGD by-products may have adverse effects on plant growth and soil quality. The use of a dry FGD by-product as a limestone substitute was investigated in a field study on three acidic agricultural soils (pH 4.6, 4.8, and 5.8) in eastern Ohio. The by-product (60% CaCO{sub 3} equivalency) was applied in September, 1992, at rates of 0, 0.5, 1.0, and 2.0 times the lime requirement of the soils, and alfalfa (Medicago sativa L.) and corn (Zea mays L.) were planted. Soils were sampled immediately after FGD application and three more times every six months thereafter. Samples were analyzed for pH and water soluble concentrations of 28 elements. Soil pH was increased by all FGD rates in the zone of incorporation (0--10 cm), with the highest rates giving a pH slightly above 7. Within one year pH increases could be detected at depths up to 30 cm. Calcium, Mg, and S increased, and Al, Mn, and Fe decreased with increasing dry FGD application rates. No trace element concentrations were changed by dry FGD application except B which was increased in the zone of incorporation. Dry FGD increased alfalfa yield on all three soils, and had no effect on corn yield. No detrimental effects on soil quality were observed.

  11. Characterization and Recovery of Rare Earths from Coal and By-Products

    Energy Technology Data Exchange (ETDEWEB)

    Granite, Evan J. [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Roth, Elliot [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States); Alvin, Mary Anne [National Energy Technology Lab. (NETL), Pittsburgh, PA, (United States)

    2016-03-25

    Coal is a precious resource, both in the United States and around the world. The United States has a 250-year supply of coal, and generates between 30 - 40% of its electricity through coal combustion. Approximately 1 Gt of coal has been mined annually in the US, although the 2015 total will likely be closer to 900 Mt (http://www.eia.gov/coal/production/quarterly/). Most of the coal is burned for power generation, but substantial quantities are also employed in the manufacture of steel, chemicals, and activated carbons. Coal has a positive impact upon many industries, including mining, power, rail transportation, manufacturing, chemical, steel, activated carbon, and fuels. Everything that is in the earth’s crust is also present within coal to some extent, and the challenge is always to utilize abundant domestic coal in clean and environmentally friendly manners. In the case of the rare earths, these valuable and extraordinarily useful elements are present within the abundant coal and coal by-products produced domestically and world-wide. These materials include the coals, as well as the combustion by-products such as ashes, coal preparation wastes, gasification slags, and mining by-products. All of these materials can be viewed as potential sources of rare earth elements. Most of the common inorganic lanthanide compounds, such as the phosphates found in coal, have very high melting, boiling, and thermal decomposition temperatures, allowing them to concentrate in combustion and gasification by-products. Furthermore, rare earths have been found in interesting concentrations in the strata above and below certain coal seams. Much of the recent research on coal utilization in the United States has focused upon the capture of pollutants such as acid gases, particulates, and mercury, and the greenhouse gas carbon dioxide. The possible recovery of rare earth and other critical elements from abundant coal and by-products is an exciting new research area, representing a

  12. Assessment of Rich-Burn, Quick-Mix, Lean-Burn Trapped Vortex Combustor for Stationary Gas Turbines

    Energy Technology Data Exchange (ETDEWEB)

    Douglas L. Straub; Kent H. Casleton; Robie E. Lewis; Todd G. Sidwell; Daniel J. Maloney; George A. Richards

    2005-01-01

    This paper describes the evaluation of an alternative combustion approach to achieve low emissions for a wide range of fuel types. This approach combines the potential advantages of a staged rich-burn, quick-mix, lean-burn (RQL) combustor with the revolutionary trapped vortex combustor (TVC) concept. Although RQL combustors have been proposed for low-Btu fuels, this paper considers the application of an RQL combustor for high-Btu natural gas applications. This paper will describe the RQL/TVC concept and experimental results conducted at 10 atm (1013 kPa or 147 psia) and an inlet-air temperature of 644 K (700°F). The results from a simple network reactor model using detailed kinetics are compared to the experimental observations. Neglecting mixing limitations, the simplified model suggests that NOx and CO performance below 10 parts per million could be achieved in an RQL approach. The CO levels predicted by the model are reasonably close to the experimental results over a wide range of operating conditions. The predicted NOx levels are reasonably close for some operating conditions; however, as the rich-stage equivalence ratio increases, the discrepancy between the experiment and the model increases. Mixing limitations are critical in any RQL combustor, and the mixing limitations for this RQL/TVC design are discussed.

  13. NATURAL ANTIOXIDANT INGREDIENT FROM BY-PRODUCTS OF FRUITS

    Directory of Open Access Journals (Sweden)

    G. S. El-Baroty

    2014-01-01

    Full Text Available The contents of total phenolics compounds and their phenolic constituents were quantified in organic and aqueous of four varieties (Zebdia, Sukkari, taimor and Hindi of mango (Mangifera indica L., seeds pulp and kernel, one varieties of pomegranate (Punica ranatum L., peel and peanut (Arachis hypogaea L., Giza 6, shell by-products. The antioxidant activities of all by products extracts were assessed by five antioxidant methods as well as by rancimate test. The total Phenolic content of aqueous and organic extracts of among all mango varieties, pomegranate and peanut shell showed the content values ranging from 71.06 to 124.18 mg/100g, 95.07 to 124.18 mg/100g and 41.64 to 71.06, respectively. Nineteen phenolic compounds were identified by High Performance Liquid Chromatography (HPLC among all mango varieties, of which vanillic acid, benzoic acid and mangiferin were occurred in high amounts. The major phenolic compounds were detected in pomegranate and peanut shell were chlorogenic and gallic and caffeic (24.42%, respectively. All fruits by products were exhibited remarkable antioxidant activity, with various degrees in all tested methods. However, among all by-products extracts, organic extract had higher antioxidant than that aqueous extracts toward all antioxidant tested. Mango kernel peel and pomegranates showed high radical scavenging activity, which could be compared with the synthetic antioxidants Butylated Hydroxyanisol (BHA. However, all by-products extracts exhibited high inhibit effect against the lipid peroxidation of sunflower oil (at 100°C as assessed by rancimat methods. However, this antioxidant activity was found to be strong significant correlation with phenolic contents (p<0.05 in by-product extracts. It can be thus concluded that varied varieties of mango, pomegranate and peanut by-products, although it constitutes the part of the fruits, it is valuable parts due to its antioxidant activities, it can be

  14. Effect of Industrial By-Products on Unconfined Compressive Strength of Solidified Organic Marine Clayey Soils

    Directory of Open Access Journals (Sweden)

    Chan-Gi Park

    2015-08-01

    Full Text Available The use of industrial by-products as admixture to ASTM Type I cement (ordinary Portland cement (OPC was investigated with the objective of improving the solidification of organic marine clayey soils. The industrial by-products considered in this paper were oyster-shell powder (OSP, steelmaking slag dust (SMS and fuel-gas-desulfurized (FGD gypsum. The industrial by-products were added to OPC at a ratio of 5% based on dry weight to produce a mixture used to solidify organic marine clayey soils. The dosage ratios of mixtures to organic marine clayey soils were 5, 10 and 15% on a dry weight basis. Unconfined compressive strength (UCS test after 28 days revealed that the highest strength was obtained with the OPC + SMS 15% mixing ratio. The UCS of specimens treated with this mixture was >500 kPa, compared with 300 kPa for specimens treated with a 15% OPC + OSP mixture and 200 kPa when 15% of OPC was used alone. These results were attributed to the more active hydration and pozzolanic reaction of the OPC + SMS mixture. This hypothesis was verified through X-ray diffraction (XRD and scanning electron microscopy (SEM analyses, and was confirmed by variations in the calcium carbonate (CaCO3 content of the materials during curing.

  15. Maximizing Utilization of Energy from Crop By-products

    Directory of Open Access Journals (Sweden)

    Budi Haryanto

    2014-03-01

    Full Text Available The availability of crop by-products is huge during harvesting times as related to the vast agricultural land area; however, their utilization is still limited due to lack of knowledge and handling problem. Seasonal effect is obvious especially during wet season when high rainfall hinders proper management of crop by-products. Crop by-products are energy rich feedstuffs in the form of chemical substance such as cellulose and hemicellulose. The utilization of cellulose and hemicellulose as sources of energy can be maximized by the application of technologies to increase the digestibility. Cellulose is polymer of glucose while hemicellulose is polymer of xylose which both can be converted to volatile fatty acids by rumen microbial enzyme activities and subsequently used by the host animal as source of energy. In addition, cellulose and hemicellulose can also be used as substrates for bioethanol production leaving behind residual matter with higher concentration of protein which is also appropriate for ruminant feeds. The fat content of crop by-products such as those in rice bran and corn germ can be extracted for oil production that can be used for human consumption with concomitant production of high nutritive value of residues for ruminant feeds. The oil extraction technologies are available; however the high cost of ethanol and oil production should obtain high attention to make the technologies more applicable at farmers’ level.

  16. Genotoxicity of Disinfection By-products: Comparison to Carcinogenicity

    Science.gov (United States)

    Disinfection by-products (DBPs) can be formed when water is disinfected by various agents such as chlorine, ozone, or chloramines. Among the >600 DBPs identified in drinking water, 11 are regulated by the U.S. Environmental Protection Agency, and another ~70 DBPs that occur at s...

  17. By-product materials in cement clinker manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Gadayev, A. [ICS and E, Aurora, CO (United States); Kodess, B. [VNIIMS Gosstandart of Russia, Moscow (Russian Federation)

    1999-02-01

    The use of Cl- and SO{sub 3}-containing by-products from chemical industries for manufacturing Portland cement clinker using a wet process was examined. The chemical and mineralogical compositions of the by-products and raw materials were determined. Homogeneous raw mixes containing different concentrations of by-products (5--30%) were prepared and the influence of the by-products on all steps of burning the mixes in a kiln to form a cement clinker was investigated. It was shown that introducing Cl- and SO{sub 3}-containing by-products to the raw mixes significantly changes all the cement clinker producing stages and changes the chemical and mineralogical compositions at all intermediate stages and in the finished products, forming new minerals containing Cl and SO{sub 3} [CaO{sub x} (SiO{sub 2}){sub y} CaCl{sub 2}] or [CaO{sub x} (SiO{sub 2}){sub y} CaSO{sub 4}] and increasing the amount of well-known intermediate minerals. The presence of the chlorides and sulfates in the cement clinker burning processes removes alkali from the raw mixes, turning them to volatile forms, accelerating the raw mineral decomposition processes and accelerating the formation processes of cement minerals (C{sub 2}S, C{sub 12}A{sub 7}, C{sub 4}AF) and formation of chloride and sulfate cycles in the kiln, forming clinker liquids and decreasing the formation and growth of the main cement minerals (C{sub 3}A, C{sub 3}S). The cement clinker contains some quantity of minerals with Cl or SO{sub 3}. Their presence in the final product decreases cement quality by reducing the amount of active CaO (C) and reducing the active CaO/SiO{sub 2} ratio.

  18. Gas and Gas Pains

    Science.gov (United States)

    ... problems with gas if you: Are lactose or gluten intolerant Eat a diet rich in fruits, vegetables, whole grains and legumes Drink carbonated beverages Have a chronic intestinal condition, such as irritable bowel syndrome or inflammatory bowel disease Neither age nor sex ...

  19. Economical Recovery of By-products in the Mining Industry

    Energy Technology Data Exchange (ETDEWEB)

    Berry, J.B.

    2001-12-05

    The U.S. Department of Energy (DOE) Office of Industrial Technologies, Mining Industry of the Future Program, works with the mining industry to further the industry's advances toward environmental and economic goals. Two of these goals are (1) responsible emission and by-product management and (2) low-cost and efficient production (DOE 1998). DOE formed an alliance with the National Mining Association (NMA) to strengthen the basis for research projects conducted to benefit the mining industry. NMA and industry representatives actively participate in this alliance by evaluating project proposals and by recommending research project selection to DOE. Similarly, the National Research Council (NRC) has recently and independently recommended research and technology development opportunities in the mining industry (NRC 2001). The Oak Ridge National Laboratory (ORNL) and Colorado School of Mines engineers conducted one such project for DOE regarding by -product recovery from mining process residue. The results of this project include this report on mining industry process residue and waste with opportunity for by-product recovery. The U.S. mineral processing industry produces over 30,000,000 metric tons per year of process residue and waste that may contain hazardous species as well as valuable by-products. This study evaluates the copper, lead, and zinc commodity sectors which generate between 23,300,000 and 24,000,000 metric tons per year. The distribution of residual elements in process residues and wastes varies over wide ranges* because of variations in the original ore content as it is extracted from the earth's crust. In the earth's crust, the elements of interest to mining fall into two general geochemical classifications, lithophiles and chalcophiles** (Cox 1997). Groups of elements are almost always present together in a given geochemical classification, but the relative amounts of each element are unique to a particular ore body. This paper

  20. The origins of religion: evolved adaptation or by-product?

    Science.gov (United States)

    Pyysiäinen, Ilkka; Hauser, Marc

    2010-03-01

    Considerable debate has surrounded the question of the origins and evolution of religion. One proposal views religion as an adaptation for cooperation, whereas an alternative proposal views religion as a by-product of evolved, non-religious, cognitive functions. We critically evaluate each approach, explore the link between religion and morality in particular, and argue that recent empirical work in moral psychology provides stronger support for the by-product approach. Specifically, despite differences in religious background, individuals show no difference in the pattern of their moral judgments for unfamiliar moral scenarios. These findings suggest that religion evolved from pre-existing cognitive functions, but that it may then have been subject to selection, creating an adaptively designed system for solving the problem of cooperation.

  1. Utilization of biodiesel by-products for mosquito control.

    Science.gov (United States)

    Pant, Megha; Sharma, Satyawati; Dubey, Saurabh; Naik, Satya Narayan; Patanjali, Phool Kumar

    2016-03-01

    The current paper has elaborated the efficient utilization of non-edible oil seed cakes (NEOC), by-products of the bio-diesel extraction process to develop a herbal and novel mosquitocidal composition against the Aedes aegypti larvae. The composition consisted of botanical active ingredients, inerts, burning agents and preservatives; where the botanical active ingredients were karanja (Pongamia glabra) cake powder and jatropha (Jatropha curcas) cake powder, products left after the extraction of oil from karanja and jatropha seed. The percentage mortality value recorded for the combination with concentration, karanja cake powder (20%) and jatropha cake powder (20%), 1:1 was 96%. The coil formulations developed from these biodiesel by-products are of low cost, environmentally friendly and are less toxic than the synthetic active ingredients.

  2. By-product information can stabilize the reliability of communication.

    Science.gov (United States)

    Schaefer, H Martin; Ruxton, G D

    2012-12-01

    Although communication underpins many biological processes, its function and basic definition remain contentious. In particular, researchers have debated whether information should be an integral part of a definition of communication and how it remains reliable. So far the handicap principle, assuming signal costs to stabilize reliable communication, has been the predominant paradigm in the study of animal communication. The role of by-product information produced by mechanisms other than the communicative interaction has been neglected in the debate on signal reliability. We argue that by-product information is common and that it provides the starting point for ritualization as the process of the evolution of communication. Second, by-product information remains unchanged during ritualization and enforces reliable communication by restricting the options for manipulation and cheating. Third, this perspective changes the focus of research on communication from studying signal costs to studying the costs of cheating. It can thus explain the reliability of signalling in many communication systems that do not rely on handicaps. We emphasize that communication can often be informative but that the evolution of communication does not cause the evolution of information because by-product information often predates and stimulates the evolution of communication. Communication is thus a consequence but not a cause of reliability. Communication is the interplay of inadvertent, informative traits and evolved traits that increase the stimulation and perception of perceivers. Viewing communication as a complex of inadvertent and derived traits facilitates understanding of the selective pressures shaping communication and those shaping information and its reliability. This viewpoint further contributes to resolving the current controversy on the role of information in communication.

  3. Chlorine dioxide and by-products in water distribution systems

    OpenAIRE

    Ferreira, Francisco Cardoso

    1991-01-01

    Chlorine dioxide is used as both a pre-oxidant and/or a post-disinfectant in several water treatment plants in the United States. Chlorine dioxide is associated with its byproducts chlorite and chlorate. Chlorine dioxide, chlorine, chlori te and chlorate were sampled in four distribution systems where chlorine dioxide is used for disinfection purposes: Charleston, WV, Columbus, GA, New Castle, PA, and Skagit, WA. The fate of chlorine dioxide and its by-products in dist...

  4. Health impact of disinfection by-products in swimming pools

    OpenAIRE

    Villanueva, Cristina M.; Laia Font-Ribera

    2012-01-01

    This article is focused on the epidemiological evidence on the health impacts related to disinfection by-products (DBPs) in swimming pools, which is a chemical hazard generated as an undesired consequence to reduce the microbial pathogens. Specific DBPs are carcinogenic, fetotoxic and/or irritant to the airways according to experimental studies. Epidemiological evidence shows that swimming in pools during pregnancy is not associated with an increased risk of reproductive outcomes. An epidemio...

  5. Parameters for quantity calculations of poultry by-products

    Directory of Open Access Journals (Sweden)

    Okanović Đorđe

    2010-01-01

    Full Text Available A significant group of inedible by-products from industrial slaughterhouses that can be used as a raw material for processing into quality feed for pigs and pets are byproducts of slaughtered poultry. The poultry industry yields a large amount of inedible byproducts of which the removal or processing requires hygienic and economic solutions. These activities primarily include the protection of the environmental from degradation processes and biological pollution, as well as securing high-protein animal feed. The incorporation of inedible slaughtered poultry by-products into food for animals involves the application of various technological processes. These processes should be simple and feasible for investments where it is necessary to obtain a quality product. At the same time, it must be taken into account that the production process does not create new secondary products or waste gases that could contaminate the environment. Scientific knowledge in the field of exploitation of inedible slaughtered poultry by-products provides the necessary basis for calculating the amount of certain types of raw materials.

  6. New insights into meat by-product utilization.

    Science.gov (United States)

    Toldrá, Fidel; Mora, Leticia; Reig, Milagro

    2016-10-01

    Meat industry generates large volumes of by-products like blood, bones, meat trimmings, skin, fatty tissues, horns, hoofs, feet, skull and viscera among others that are costly to be treated and disposed ecologically. These costs can be balanced through innovation to generate added value products that increase its profitability. Rendering results in feed ingredients for livestock, poultry and aquaculture as well as for pet foods. Energy valorization can be obtained through the thermochemical processing of meat and bone meal or the use of waste animal fats for the production of biodiesel. More recently, new applications have been reported like the production of polyhydroxyalkanoates as alternative to plastics produced from petroleum. Other interesting valorization strategies are based on the hydrolysis of by-products to obtain added value products like bioactive peptides with relevant physiological effects as antihypertensive, antioxidant, antidiabetic, antimicrobial, etc. with promising applications in the food, pharmaceutical and cosmetics industry. This paper reports and discusses the latest developments and trends in the use and valorisation of meat industry by-products.

  7. Gas Sensor

    KAUST Repository

    Luebke, Ryan

    2015-01-22

    A gas sensor using a metal organic framework material can be fully integrated with related circuitry on a single substrate. In an on-chip application, the gas sensor can result in an area-efficient fully integrated gas sensor solution. In one aspect, a gas sensor can include a first gas sensing region including a first pair of electrodes, and a first gas sensitive material proximate to the first pair of electrodes, wherein the first gas sensitive material includes a first metal organic framework material.

  8. Chemical production from industrial by-product gases: Final report

    Energy Technology Data Exchange (ETDEWEB)

    Lyke, S.E.; Moore, R.H.

    1981-04-01

    The potential for conservation of natural gas is studied and the technical and economic feasibility and the implementation of ventures to produce such chemicals using carbon monoxide and hydrogen from byproduct gases are determined. A survey was performed of potential chemical products and byproduct gas sources. Byproduct gases from the elemental phosphorus and the iron and steel industries were selected for detailed study. Gas sampling, preliminary design, market surveys, and economic analyses were performed for specific sources in the selected industries. The study showed that production of methanol or ammonia from byproduct gas at the sites studied in the elemental phosphorus and the iron and steel industries is technically feasible but not economically viable under current conditions. Several other applications are identified as having the potential for better economics. The survey performed identified a need for an improved method of recovering carbon monoxide from dilute gases. A modest experimental program was directed toward the development of a permselective membrane to fulfill that need. A practical membrane was not developed but further investigation along the same lines is recommended. (MCW)

  9. ANALYSIS OF BY-PRODUCTS MARKET IN RUSSIA

    OpenAIRE

    Keniyz N. V.; Nesterenko A. A.; Syrovatkina S. S.

    2015-01-01

    Changing style of life, its rhythm and tendencies dictate their own conditions. The deficit of time makes us economize it on all, including the time for cooking. Among the main trends of the domestic meat market - switching consumers from frozen meat products to fresh cooled products. In connection with it the amount of consumers of meat semi-finished products grows. In the work there was considered the results of research of the Russian market of by-products. The market of frozen meat by-pro...

  10. Well-to-Wheels analysis of landfill gas-based pathways and their addition to the GREET model.

    Energy Technology Data Exchange (ETDEWEB)

    Mintz, M.; Han, J.; Wang, M.; Saricks, C.; Energy Systems

    2010-06-30

    Today, approximately 300 million standard cubic ft/day (mmscfd) of natural gas and 1600 MW of electricity are produced from the decomposition of organic waste at 519 U.S. landfills (EPA 2010a). Since landfill gas (LFG) is a renewable resource, this energy is considered renewable. When used as a vehicle fuel, compressed natural gas (CNG) produced from LFG consumes up to 185,000 Btu of fossil fuel and generates from 1.5 to 18.4 kg of carbon dioxide-equivalent (CO{sub 2}e) emissions per million Btu of fuel on a 'well-to-wheel' (WTW) basis. This compares with approximately 1.1 million Btu and 78.2 kg of CO{sub 2}e per million Btu for CNG from fossil natural gas and 1.2 million Btu and 97.5 kg of CO{sub 2}e per million Btu for petroleum gasoline. Because of the additional energy required for liquefaction, LFG-based liquefied natural gas (LNG) requires more fossil fuel (222,000-227,000 Btu/million Btu WTW) and generates more GHG emissions (approximately 22 kg CO{sub 2}e /MM Btu WTW) if grid electricity is used for the liquefaction process. However, if some of the LFG is used to generate electricity for gas cleanup and liquefaction (or compression, in the case of CNG), vehicle fuel produced from LFG can have no fossil fuel input and only minimal GHG emissions (1.5-7.7 kg CO{sub 2}e /MM Btu) on a WTW basis. Thus, LFG-based natural gas can be one of the lowest GHG-emitting fuels for light- or heavy-duty vehicles. This report discusses the size and scope of biomethane resources from landfills and the pathways by which those resources can be turned into and utilized as vehicle fuel. It includes characterizations of the LFG stream and the processes used to convert low-Btu LFG into high-Btu renewable natural gas (RNG); documents the conversion efficiencies and losses of those processes, the choice of processes modeled in GREET, and other assumptions used to construct GREET pathways; and presents GREET results by pathway stage. GREET estimates of well-to-pump (WTP

  11. Utilization of Biodiesel By-Products for Biogas Production

    Science.gov (United States)

    Kolesárová, Nina; Hutňan, Miroslav; Bodík, Igor; Špalková, Viera

    2011-01-01

    This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered. PMID:21403868

  12. Utilization of Biodiesel By-Products for Biogas Production

    Directory of Open Access Journals (Sweden)

    Nina Kolesárová

    2011-01-01

    Full Text Available This contribution reviews the possibility of using the by-products from biodiesel production as substrates for anaerobic digestion and production of biogas. The process of biodiesel production is predominantly carried out by catalyzed transesterification. Besides desired methylesters, this reaction provides also few other products, including crude glycerol, oil-pressed cakes, and washing water. Crude glycerol or g-phase is heavier separate liquid phase, composed mainly by glycerol. A couple of studies have demonstrated the possibility of biogas production, using g-phase as a single substrate, and it has also shown a great potential as a cosubstrate by anaerobic treatment of different types of organic waste or energy crops. Oil cakes or oil meals are solid residues obtained after oil extraction from the seeds. Another possible by-product is the washing water from raw biodiesel purification, which is an oily and soapy liquid. All of these materials have been suggested as feasible substrates for anaerobic degradation, although some issues and inhibitory factors have to be considered.

  13. Utilisation of Food and Woodworking Production By-products by Composting

    Directory of Open Access Journals (Sweden)

    Uldis Viesturs

    2004-10-01

    Full Text Available The purpose of the study was to develop laboratory-scale technologies for composting milk/cheese whey, spent liquor, brewery yeast, fish processing by-products, etc., adding these by-products and special microorganism associations to the basic material - sawdust, bark, etc., also arranging different experimental composting sites. Two Trichoderma strains (Tr. lignorum, Tr. viride and a nitrification association for regulating the circulation of nitrogen-ammonification and nitrification processes were applied. Monitoring of the composting quality was realised by microbiological and chemical analyses, and biotests for compost quality (toxicity assessment. For purifying the polluted air from the composting facilities, the biofiltration technique was realised in a modified SSF system. Biodegradation of ammonia was investigated in a two-stage system with the inert packing material - dolomite broken bricks, and hemoautotrophic microorganisms: DN-1 (Pseudomonas sp., DN-2 (Nitrosomonas sp., DN-3 (Nitrobacter sp. and DN-13 (Sarcina sp.. For hydrogen sulphide biodegradation, Thiobacillus thioparus-3 was immobilised on glass bricks as the carrier material. Biodegradation efficiency of hydrogen sulphide was 87%. Biodegradation of ammonia in the first step in the two-stage system reached 77%, degradation of the gas remaining in the second step was 75%. Compost's quality was similar to black soil - brown-coloured, with good soil odour and without toxic compounds.

  14. Toluene decomposition performance and NOx by-product formation during a DBD-catalyst process.

    Science.gov (United States)

    Guo, Yufang; Liao, Xiaobin; Fu, Mingli; Huang, Haibao; Ye, Daiqi

    2015-02-01

    Characteristics of toluene decomposition and formation of nitrogen oxide (NOx) by-products were investigated in a dielectric barrier discharge (DBD) reactor with/without catalyst at room temperature and atmospheric pressure. Four kinds of metal oxides, i.e., manganese oxide (MnOx), iron oxide (FeOx), cobalt oxide (CoOx) and copper oxide (CuO), supported on Al2O3/nickel foam, were used as catalysts. It was found that introducing catalysts could improve toluene removal efficiency, promote decomposition of by-product ozone and enhance CO2 selectivity. In addition, NOx was suppressed with the decrease of specific energy density (SED) and the increase of humidity, gas flow rate and toluene concentration, or catalyst introduction. Among the four kinds of catalysts, the CuO catalyst showed the best performance in NOx suppression. The MnOx catalyst exhibited the lowest concentration of O3 and highest CO2 selectivity but the highest concentration of NOx. A possible pathway for NOx production in DBD was discussed. The contributions of oxygen active species and hydroxyl radicals are dominant in NOx suppression.

  15. Utilisation of biomass gasification by-products for onsite energy production.

    Science.gov (United States)

    Vakalis, S; Sotiropoulos, A; Moustakas, K; Malamis, D; Baratieri, M

    2016-06-01

    Small scale biomass gasification is a sector with growth and increasing applications owing to the environmental goals of the European Union and the incentivised policies of most European countries. This study addresses two aspects, which are at the centre of attention concerning the operation and development of small scale gasifiers; reuse of waste and increase of energy efficiency. Several authors have denoted that the low electrical efficiency of these systems is the main barrier for further commercial development. In addition, gasification has several by-products that have no further use and are discarded as waste. In the framework of this manuscript, a secondary reactor is introduced and modelled. The main operating principle is the utilisation of char and flue gases for further energy production. These by-products are reformed into secondary producer gas by means of a secondary reactor. In addition, a set of heat exchangers capture the waste heat and optimise the process. This case study is modelled in a MATLAB-Cantera environment. The model is non-stoichiometric and applies the Gibbs minimisation principle. The simulations show that some of the thermal energy is depleted during the process owing to the preheating of flue gases. Nonetheless, the addition of a secondary reactor results in an increase of the electrical power production efficiency and the combined heat and power (CHP) efficiency. © The Author(s) 2016.

  16. Fermentation Characteristics, Tannin Contents and Ruminal Degradation of Green Tea and Black Tea By-products Ensiled at Different Temperatures

    Directory of Open Access Journals (Sweden)

    Makoto Kondo

    2014-07-01

    Full Text Available Green and black tea by-products, obtained from ready-made tea industry, were ensiled at 10°C, 20°C, and 30°C. Green tea by-product silage (GTS and black tea by-product silage (BTS were opened at 5, 10, 45 days after ensiling. Fermentation characteristics and nutrient composition, including tannins, were monitored and the silages on day 45 were subjected to in vitro ruminal fermentation to assess anti-nutritive effects of tannins using polyethylene glycol (PEG as a tannin-binding agent. Results showed that the GTS and BTS silages were stable and fermented slightly when ensiled at 10°C. The GTS stored at 20°C and 30°C showed rapid pH decline and high acetic acid concentration. The BTS was fermented gradually with moderate change of pH and acid concentration. Acetic acid was the main acid product of fermentation in both GTS and BTS. The contents of total extractable phenolics and total extractable tannins in both silages were unaffected by storage temperatures, but condensed tannins in GTS were less when stored at high temperature. The GTS showed no PEG response on in vitro gas production, and revealed only a small increase by PEG on NH3-N concentration. Storage temperature of GTS did not affect the extent of PEG response to both gas production and NH3-N concentration. On the other hand, addition of PEG on BTS markedly increased both the gas production and NH3-N concentration at any ensiled temperature. It can be concluded that tannins in both GTS and BTS suppressed rumen fermentation, and tannins in GTS did more weakly than that in BTS. Ensiling temperature for both tea by-products did not affect the tannin’s activity in the rumen.

  17. Chlorine dioxine DBPs (disinfection by-products in drinking water

    Directory of Open Access Journals (Sweden)

    C. Lasagna

    2013-01-01

    Full Text Available Since the 1970s it has been well known that, though water for human consumption is generally disinfected before being distributed along the network, the use of chemicals results in the formation of many different Disinfection By-Products (DBPs. In the case of chlorine dioxide, the most important and represented DBPs are chlorite and chlorate: after an introduction concerning the current Italian regulation on this subject, in the experimental part the results of a 7-year minitoring campaign, concerning water of different origin collected from taps in various Italian regions, are shown. The analytical technique used for the determination of chlorite and chlorate was Ion Chromatography. The result obtained are finally discussed.

  18. Detection of regulated disinfection by-products in cheeses.

    Science.gov (United States)

    Cardador, Maria Jose; Gallego, Mercedes; Cabezas, Lourdes; Fernández-Salguero, Jose

    2016-08-01

    Cheese can contain regulated disinfection by-products (DBPs), mainly through contact with brine solutions prepared in disinfected water or sanitisers used to clean all contact surfaces, such as processing equipment and tanks. This study has focused on the possible presence of up to 10 trihalomethanes (THMs) and 13 haloacetic acids (HAAs) in a wide range of European cheeses. The study shows that 2 THMs, (in particular trichloromethane) and 3 HAAs (in particular dichloroacetic acid) can be found at μg/kg levels in the 56 cheeses analysed. Of the two types of DBPs, HAAs were generally present at higher concentrations, due to their hydrophilic and non-volatile nature. Despite their different nature (THMs are lipophilic), both of them have an affinity for fatty cheeses, increasing their concentrations as the percentage of water decreased because the DBPs were concentrated in the aqueous phase of the cheeses.

  19. Valorisation of by Products from Bleached Eucalyptus Kraft Pulp Mill

    Science.gov (United States)

    Silva, M. C.; Lopes, O. R.; Colodette, J. L.; Porto, A. O.; Rieumont, J.; Chaussy, D.; Belgacem, M. N.; Silva, G. G.

    2008-08-01

    Three industrial wastes arising from bleached hardwood kraft pulps, namely: unbleached screen rejects (USR), effluent treatment (ETW), and eucalyptus bark (EB) were analyzed with the aim of their possible valorization as an alternative source of cellulose. Their morphological properties were determined using MorFi apparatus. For this study the sample bleached kraft pulp, BKP, was analyzed as a reference. Lignin and carbohydrate contents were also quantified. These by-products were studied as such (i.e. without careful purification) because we intended to find rational and low-cost way of valorization. In fact any additional operation will induce an over cost. The results obtained indicate that these industrial wastes can be potential raw material in fibre-based applications (paper, composites…), since they contain a high proportion of cellulose with preserved fibrillar morphology. Some of these materials have low lignin and inorganic residue contents.

  20. Health impact of disinfection by-products in swimming pools.

    Science.gov (United States)

    Villanueva, Cristina M; Font-Ribera, Laia

    2012-01-01

    This article is focused on the epidemiological evidence on the health impacts related to disinfection by-products (DBPs) in swimming pools, which is a chemical hazard generated as an undesired consequence to reduce the microbial pathogens. Specific DBPs are carcinogenic, fetotoxic and/or irritant to the airways according to experimental studies. Epidemiological evidence shows that swimming in pools during pregnancy is not associated with an increased risk of reproductive outcomes. An epidemiological study suggested an increased risk of bladder cancer with swimming pool attendance, although evidence is inconclusive. A higher prevalence of respiratory symptoms including asthma is found among swimming pool workers and elite swimmers, although the causality of this association is unclear. The body of evidence in children indicates that asthma is not increased by swimming pool attendance. Overall, the available knowledge suggests that the health benefits of swimming outweigh the potential health risks of chemical contamination. However, the positive effects of swimming should be enhanced by minimising potential risks.

  1. Effect of Celebrity Endorsement in Advertising Activities by Product Type

    Directory of Open Access Journals (Sweden)

    Karasiewicz Grzegorz

    2014-12-01

    Full Text Available This article seeks to answer two related questions: are celebrity endorsements more likely to be result in a higher evaluation of the product being advertised than use of an anonymous individual (e.g. a typical consumer; and, if present, do these positive effects vary by product category? To answer these two questions research was conducted on a 237 student sample employing a quasi-experiment consisting of four groups (two product categories and two types of endorsers using data collected through an online survey. The results indicate that celebrity endorsements do have a positive impact on the evaluation of durable goods, but do not affect the evaluation of frequently purchased products. This finding largely confirms the assumptions of the match-up model, the meaning transfer model, and the ELM model.

  2. Wheat germ: not only a by-product.

    Science.gov (United States)

    Brandolini, Andrea; Hidalgo, Alyssa

    2012-03-01

    The wheat germ (embryonic axis and scutellum) represents about 2.5-3.8% of total seed weight and is an important by-product of the flour milling industry. The germ contains about 10-15% lipids, 26-35% proteins, 17% sugars, 1.5-4.5% fibre and 4% minerals, as well as significant quantities of bioactive compounds such as tocopherols [300-740 mg/kg dry matter (DM)], phytosterols (24-50 mg/kg), policosanols (10 mg/kg), carotenoids (4-38 mg/kg), thiamin (15-23 mg/kg) and riboflavin (6-10 mg/kg). Oil recovery is achieved by mechanical pressing or solvent extraction, which retrieve about 50% or 90% lipids, respectively; innovative approaches, such as supercritical carbon dioxide extraction, are also proposed. The oil is rich in triglycerides (57% of total lipids), mainly linoleic (18:2), palmitic (16:0) and oleic (18:1) acids, but relevant amounts of sterols, mono- and diglycerides, phospho- and glycolipids are present. The lypophilic antioxidants tocopherols and carotenoids are also abundant. The main by-product of oil extraction is defatted germ meal, which has high protein content (30-32%), is rich in albumin (34.5% of total protein) and globulin (15.6%), and thus presents a well-balanced amino acid profile. Its principal mineral constituents are potassium, magnesium, calcium, zinc and manganese, in decreasing order. Total flavonoid content is about 0.35 g rutin equivalent/100 g DM. The wheat germ is therefore a unique source of concentrated nutrients, highly valued as food supplement. While the oil is widely appreciated for its pharmaceutical and nutritional value, the defatted germ meal is a promising source of high-quality vegetable proteins. Better nutrient separation from the kernel and improved fractioning techniques could also provide high-purity molecules with positive health benefits.

  3. Eco-Materials Made From Industrial By-Products and Carbon Dioxide

    Science.gov (United States)

    Goto, S.

    2007-03-01

    The eco-materials made from steel-making slag and carbon dioxide are introduced. Steel-making slag is one of industrial by-products and it has been wanted to be used in more beneficial way. Carbon dioxide is also wanted to be decreased the emission for green house effects. The materials made with steel-making slag by carbonation have very high strength and very high durability for hydration and abrasion. Mechanisms of carbonation reaction is discussed, in which the effects of water content, temperature, porosity of compacts, gas content and pressure, etc. are discussed. The compressive strength was obtained about 100 MPa at a porosity of 10 volume %these carbonated blocks have higher abrasion resistance than hydrated cement pastes. The most benefit in this process is no energy is required for the reaction except that of grinding, handling and/or transportation of materials. The exhaust gas from plant will be available for the source of carbon dioxide. Lastly, Marine block, matrix of glass fiber reinforced concrete, and artificial aggregate are introduced as application examples.

  4. New solutions for by-products plants developed by Koksoprojekt

    Energy Technology Data Exchange (ETDEWEB)

    S. Tomal; R. Zajdel; H. Zembala

    2002-07-01

    The paper focuses on recent and current activities of KOKSOPROJEKT Company oriented towards up-to-dating and optimization of its own developed processes and technical solutions. As a result of these activities the investment and operation cost have been decreased and European standards in environmental protection have not only been met, but even exceeded. From among many developments in this field this paper only presents three reliable and efficient processes for coke oven gas desulfurizing: ammonia process, potash-vacuum process and catalytic-soda (KAT-SOD) process. All of mentioned technologies have been implemented in Polish coking plants, and the desulfurization plants operate with good results. 1 tab.

  5. Fluosorbent injection by-products. Final report, January 1997 through December 1999

    Energy Technology Data Exchange (ETDEWEB)

    Nelson, Sid [Sorbent Technologies Corp., Twinsburg, OH (United States)

    2000-02-29

    Few, if any, economical alternatives exist for small coal-fired boilers that require a flue-gas desulfurization (FGD) system which does not generate wastes. A new duct-injection technology, called "Fluesorbent," was developed to help fill this gap. Fluesorbent was intentionally designed so that the saturated S02-sorbent materials can be used as beneficial soil amendments after they were used for FGD. A. Project Objective: The objective of this project was to demonstrate in the field that saturated Fluesorbent materials can be utilized beneficially on agricultural and grass lands. B. Project Results: The results of this project suggest that, indeed, saturated Fluesorbent has excellent potential as a commercial soil amendment for crops, such as alfalfa and soybeans, and for turf. Yields of alfalfa and turf were substantially increased in field testing on acidic soils by one-time applications of Fluesorbent FGD by-products. In the first two years of field testing, alfalfa yields on field plots with the FGD by-products were approximately 40% greater than on plots treated with an equivalent amount of agricultural lime. In a third, drought-influenced year, the gains were smaller. Turf grass growth was fully twice that of untreated plots and more than 10% greater than with ag-lime. A small farm trial with a modified version of the Fluesorbent by-product increased soybean yield by 25%. A small trial with corn, however, indicated no significant improvement. Even though the Fluesorbent contained fly ash, the alfalfa and turf grown in FGD-treated plots contained significantly lower levels of heavy metals than that grown in untreated or lime-treated plots. In a project greenhouse experiment, the fly ashes from five different coal boilers from around Ohio produced equivalent yields when mixed with Fluesorbent, indicating wide potential applicability of the new technology. The Fluesorbent materials were also found to be easy to extrude into pellets for use with mixed fertilizers

  6. Health impact of disinfection by-products in swimming pools

    Directory of Open Access Journals (Sweden)

    Cristina M. Villanueva

    2012-12-01

    Full Text Available This article is focused on the epidemiological evidence on the health impacts related to disinfection by-products (DBPs in swimming pools, which is a chemical hazard generated as an undesired consequence to reduce the microbial pathogens. Specific DBPs are carcinogenic, fetotoxic and/or irritant to the airways according to experimental studies. Epidemiological evidence shows that swimming in pools during pregnancy is not associated with an increased risk of reproductive outcomes. An epidemiological study suggested an increased risk of bladder cancer with swimming pool attendance, although evidence is inconclusive. A higher prevalence of respiratory symptoms including asthma is found among swimming pool workers and elite swimmers, although the causality of this association is unclear. The body of evidence in children indicates that asthma is not increased by swimming pool attendance. Overall, the available knowledge suggests that the health benefits of swimming outweigh the potential health risks of chemical contamination. However, the positive effects of swimming should be enhanced by minimising potential risks.

  7. Minimization of the formation of disinfection by-products.

    Science.gov (United States)

    Badawy, Mohamed I; Gad-Allah, Tarek A; Ali, Mohamed E M; Yoon, Yeoman

    2012-09-01

    The drinking water industry is required to minimize DBPs levels while ensuring adequate disinfection. In this study, efficient and appropriate treatment scheme for the reduction of disinfection by-product (DBPs) formation in drinking water containing natural organic matter has been established. This was carried out by the investigation of different treatment schemes consisting of enhanced coagulation, sedimentation, disinfection by using chlorine dioxide/ozone, filtration by sand filter, or granular activated carbon (GAC). Bench scale treatment schemes were applied on actual samples from different selected sites to identify the best conditions for the treatment of water. Samples were collected from effluent of each step in the treatment train in order to analyze pH, UV absorbance at 254 nm (UVA(254)), specific UV absorbance at 254 nm (SUVA(254)), dissolved organic carbon (DOC), haloacetic acids (HAAs) and trihalomethanes (THMs). The obtained results indicated that using pre-ozonation/enhanced coagulation/activated carbon filtration treatment train appears to be the most effective method for reducing DBPs precursors in drinking water treatment.

  8. UTILIZATION OF LOW NOx COAL COMBUSTION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    J.Y. Hwang; X. Huang; M.G. McKimpson; R.E. Tieder; A.M. Hein; J.M. Gillis; D.C. Popko; K.L. Paxton; Z. Li; X. Liu; X. Song; R.I. Kramer

    1998-12-01

    Low NO{sub x} combustion practices are critical for reducing NO{sub x} emissions from power plants. These low NO{sub x} combustion practices, however, generate high residual carbon contents in the fly ash produced. These high carbon contents threaten utilization of this combustion by-product. This research has successfully developed a separation technology to render fly ash into useful, quality-controlled materials. This technology offers great flexibility and has been shown to be applicable to all of the fly ashes tested (more than 10). The separated materials can be utilized in traditional fly ash applications, such as cement and concrete, as well as in nontraditional applications such as plastic fillers, metal matrix composites, refractories, and carbon adsorbents. Technologies to use beneficiated fly ash in these applications are being successfully developed. In the future, we will continue to refine the separation and utilization technologies to expand the utilization of fly ash. The disposal of more than 31 million tons of fly ash per year is an important environmental issue. With continued development, it will be possible to increase economic, energy and environmental benefits by re-directing more of this fly ash into useful materials.

  9. Synthesis of zeolite phases from combustion by-products

    Energy Technology Data Exchange (ETDEWEB)

    Pimraksa, K.; Chindaprasirt, P.; Setthaya, N. [Chiang Mai University, Chiang Mai (Thailand). Dept. of Industrial Chemistry

    2010-12-15

    Synthesis of zeolites from combustion by-products, including fly ash, bottom ash and rice husk ash, was studied. A molar ratio of SiO{sub 2}/Al2O{sub 3} of 1.5 was used for the syntheses. Refluxing and hydrothermal methods were also used for synthesis for comparison. The reaction temperatures of refluxing and hydrothermal methods were 100{sup o}C and 130{sup o}C, respectively. Sodalite, phillipsite-K, and zeolite P1 with analcime were obtained when fly ash, bottom ash and rice husk ash were used as starting materials, respectively. With rice husk ash as a starting material, zeolite P1 was produced. This result had advantages over previous studies as there was no prior activation required for the synthesis. The concentrations and types of alkaline used in the synthesis also determined the zeolite type. The different zeolites obtained from three systems were measured for specific surface area and pore size by using BET and Hg-porosimetry, respectively. Ammonium exchange capacities of the synthesised powders containing zeolites, sodalite, zeolite P1 and phillipsite-K were 38.5, 65.0 and 154.7 meq 100 g{sup 1}, respectively.

  10. Synthesis of zeolite phases from combustion by-products.

    Science.gov (United States)

    Pimraksa, Kedsarin; Chindaprasirt, Prinya; Setthaya, Naruemon

    2010-12-01

    Synthesis of zeolites from combustion by-products, including fly ash, bottom ash and rice husk ash, was studied. A molar ratio of SiO2/Al2O3 of 1.5 was used for the syntheses. Refluxing and hydrothermal methods were also used for synthesis for comparison. The reaction temperatures of refluxing and hydrothermal methods were 100 degrees C and 130 degrees C, respectively. Sodalite, phillipsite-K, and zeolite P1 with analcime were obtained when fly ash, bottom ash and rice husk ash were used as starting materials, respectively. With rice husk ash as a starting material, zeolite P1 was produced. This result had advantages over previous studies as there was no prior activation required for the synthesis. The concentrations and types of alkaline used in the synthesis also determined the zeolite type. The different zeolites obtained from three systems were measured for specific surface area and pore size by using BET and Hg-porosimetry, respectively. Ammonium exchange capacities of the synthesised powders containing zeolites, sodalite, zeolite P1 and phillipsite-K were 38.5, 65.0 and 154.7 meq 100 g(-1), respectively.

  11. Disinfection by-product formation during seawater desalination: A review.

    Science.gov (United States)

    Kim, Daekyun; Amy, Gary L; Karanfil, Tanju

    2015-09-15

    Due to increased freshwater demand across the globe, seawater desalination has become the technology of choice in augmenting water supplies in many parts of the world. The use of chemical disinfection is necessary in desalination plants for pre-treatment to control both biofouling as well as the post-disinfection of desalinated water. Although chlorine is the most commonly used disinfectant in desalination plants, its reaction with organic matter produces various disinfection by-products (DBPs) (e.g., trihalomethanes [THMs], haloacetic acids [HAAs], and haloacetonitriles [HANs]), and some DBPs are regulated in many countries due to their potential risks to public health. To reduce the formation of chlorinated DBPs, alternative oxidants (disinfectants) such as chloramines, chlorine dioxide, and ozone can be considered, but they also produce other types of DBPs. In addition, due to high levels of bromide and iodide concentrations in seawater, highly cytotoxic and genotoxic DBP species (i.e., brominated and iodinated DBPs) may form in distribution systems, especially when desalinated water is blended with other source waters having higher levels of organic matter. This article reviews the knowledge accumulated in the last few decades on DBP formation during seawater desalination, and summarizes in detail, the occurrence of DBPs in various thermal and membrane plants involving different desalination processes. The review also identifies the current challenges and future research needs for controlling DBP formation in seawater desalination plants and to reduce the potential toxicity of desalinated water.

  12. Torrefaction of residues and by-products from sunflower chain

    Directory of Open Access Journals (Sweden)

    G. Riva

    2013-09-01

    Full Text Available The high heterogeneity of some residual biomasses makes rather difficult their energy use and standardisation is a key aspect for these fuel products. Torrefaction is an interesting process used to improve the quality of ligno-cellulosic biomasses and to achieve standardisation. In the present study torrefaction has been employed on residues and by-products deriving from sunflower production chain, in particular sunflower stalks and oil press cake. The thermal behaviour of materials has been studied at first by thermo-gravimetric analysis in order to identify torrefaction temperatures range. Different residence time and torrefaction temperatures have been employed in a bench top torrefaction reactor afterwards. Analyses of raw and torrefied materials have been carried out to assess the influence of the process. As a consequence of torrefaction, the carbon and ash contents increase while the volatilisation range is reduced making the material more stable and standardised. Mass yield, energy yield and energy densification reach values of about 60 %, 80 % and 1.33 for sunflower stalks and 64 %, 85 % and 1.33 for sunflower oil press cake respectively. As highlighted by results, torrefaction is more interesting for sunflower stalks than oil cake and husks because of the different starting characteristics. Untreated oil cake and husks already show a good high heating value and the eventual torrefaction should be mild. On the contrary for sunflower stalks the process is more useful and could be more severe.

  13. Requirements for gas quality and gas appliances

    NARCIS (Netherlands)

    Levinsky, Howard; Gersen, Sander; Kiewiet, Bert

    2015-01-01

    Introduction The gas transmission network in the Netherlands transports two different qualities of gas, low-calorific gas known as G-gas or L-gas and, high calorific gas (H-gas). These two gas qualities are transported in separate networks, and are connected by means of five blending and conversion

  14. DEVELOPMENT OF ACTIVATED CARBONS FROM COAL COMBUSTION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    Harold H. Schobert; M. Mercedes Maroto-Valer; Zhe Lu

    2003-09-30

    The increasing role of coal as a source of energy in the 21st century will demand environmental and cost-effective strategies for the use of coal combustion by-products (CCBPs), mainly unburned carbon in fly ash. Unburned carbon is nowadays regarded as a waste product and its fate is mainly disposal, due to the present lack of efficient routes for its utilization. However, unburned carbon is a potential precursor for the production of adsorbent carbons, since it has gone through a devolatilization process while in the combustor, and therefore, only requires to be activated. Accordingly, the principal objective of this work was to characterize and utilize the unburned carbon in fly ash for the production of activated carbons. The unburned carbon samples were collected from different combustion systems, including pulverized utility boilers, a utility cyclone, a stoker, and a fluidized bed combustor. LOI (loss-on-ignition), proximate, ultimate, and petrographic analyses were conducted, and the surface areas of the samples were characterized by N2 adsorption isotherms at 77K. The LOIs of the unburned carbon samples varied between 21.79-84.52%. The proximate analyses showed that all the samples had very low moisture contents (0.17 to 3.39 wt %), while the volatile matter contents varied between 0.45 to 24.82 wt%. The elemental analyses show that all the unburned carbon samples consist mainly of carbon with very little hydrogen, nitrogen, sulfur and oxygen In addition, the potential use of unburned carbon as precursor for activated carbon (AC) was investigated. Activated carbons with specific surface area up to 1075m{sup 2}/g were produced from the unburned carbon. The porosity of the resultant activated carbons was related to the properties of the unburned carbon feedstock and the activation conditions used. It was found that not all the unburned carbon samples are equally suited for activation, and furthermore, their potential as activated carbons precursors could be

  15. Gas magnetometer

    Science.gov (United States)

    Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

    2016-05-03

    Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

  16. Gas magnetometer

    Energy Technology Data Exchange (ETDEWEB)

    Walker, Thad Gilbert; Lancor, Brian Robert; Wyllie, Robert

    2016-05-03

    Measurement of a precessional rate of a gas, such as an alkali gas, in a magnetic field is made by promoting a non-uniform precession of the gas in which substantially no net magnetic field affects the gas during a majority of the precession cycle. This allows sensitive gases that would be subject to spin-exchange collision de-phasing to be effectively used for extremely sensitive measurements in the presence of an environmental magnetic field such as the Earth's magnetic field.

  17. Gas chromatography

    Science.gov (United States)

    Guiochon, Georges; Guillemin, Claude L.

    1990-11-01

    Gas chromatography is a powerful separation technique for gas and vapor mixtures. Combining separation and on-line detection permits accurate quantitative analysis of complex mixtures, including traces of compounds down to parts per trillions in some particular cases. The importance of gas chromatography in quality control and process control in the chemical and drug industry, in environmental pollution investigations and in clinical analysis is critical. The principles of the technique are discussed, the main components of a gas chromatograph are described and some idea of the importance of the applications is given.

  18. Application of bacteriophages specific to hydrogen sulfide-producing bacteria in raw poultry by-products.

    Science.gov (United States)

    Gong, Chao; Liu, Xiaohua; Jiang, Xiuping

    2014-03-01

    Hydrogen sulfide-producing bacteria (SPB) can spoil raw animal materials and release harmful hydrogen sulfide (H2S) gas. The objective of this study was to apply a SPB-specific bacteriophage cocktail to control H2S production by SPB in different raw poultry by-products in the laboratory (20, 30, and 37°C) and greenhouse (average temperature 29 to 31°C, humidity 34.8 to 59.8%, and light intensity 604.8 Wm(2)) by simulating transportation and a rendering facility. The amount of H2S production was determined using either test strips impregnated with lead acetate or a H2S monitor. In the laboratory, phage treatment applied to fresh chicken meat inoculated with SPB, spoiled chicken meat, chicken guts, and chicken feathers reduced H2S production by approximately 25 to 69% at temperatures from 20 to 37°C. In the greenhouse, phage treatment achieved approximately a 30 to 85% reduction of H2S yield in chicken offal and feathers. Among all phage treatments, multiplicity of infection (MOI) of 100 exhibited the highest inhibitory activities against SPB on H2S production. Several factors such as initial SPB level, temperature, and MOI affect lytic activities of bacteriophages. Our study demonstrated that the phage cocktail is effective to reduce the production of H2S by SPB significantly in raw animal materials. This biological control method can control SPB in raw poultry by-products at ambient temperatures, leading to a safer working environment and high quality product with less nutrient degradation for the rendering industry.

  19. A modern solid waste management strategy--the generation of new by-products.

    Science.gov (United States)

    Fudala-Ksiazek, Sylwia; Pierpaoli, Mattia; Kulbat, Eliza; Luczkiewicz, Aneta

    2016-03-01

    To benefit the environment and society, EU legislation has introduced a 'zero waste' strategy, in which waste material should be converted to resources. Such legislation is supported by the solid waste hierarchy concept, which is a set of priorities in waste management. Under this concept, municipal solid waste plants (MSWPs) should be equipped with sorting and recycling facilities, composting/incineration units and landfill prisms for residual bulk disposal. However, each of the aforementioned facilities generates by-products that must be treated. This project focuses on the leachates from landfill prisms, including modern prism (MP) that meet EU requirements and previous prism (PP) that provide for the storage of permitted biodegradable waste as well as technological wastewaters from sorting unit (SU) and composting unit (CU), which are usually overlooked. The physico-chemical parameters of the liquid by-products collected over 38 months were supported by quantitative real-time PCR (qPCR) amplifications of functional genes transcripts and a metagenomic approach that describes the archaeal and bacterial community in the MP. The obtained data show that SU and especially CU generate wastewater that is rich in nutrients, organic matter and heavy metals. Through their on-site pre-treatment and recirculation via landfill prisms, the landfill waste decomposition process may be accelerated because of the introduction of organic matter and greenhouse gas emissions may be increased. These results have been confirmed by the progressive abundance of both archaeal community and the methyl coenzyme M reductase (mcrA) gene. The resulting multivariate data set, supported by a principal component analysis, provides useful information for the design, operation and risk assessment of modern MSWPs.

  20. Mineralogy of clean coal combustion by-products

    Institute of Scientific and Technical Information of China (English)

    Ligang Wang; Changhe Chen; Kruse H. Kolker

    2004-01-01

    Coal combustion technologies are changing in order to bum coal more cleanly. Many "clean combustion" and postcombustion technologies are developed to remove SO2 and NOx gases, particulate matter during combustion, or from the flue gases leaving the furnace. This paper focuses on three types of fly ash (flue gas desulfurization (FGD) residuals, atmospheric fluidized bed combustion (AFBC) residuals and sorbent duct injection (SDI) residuals) which produced by "the clean combustion" and postcombustion technologies. The residuals formed by FGD are PCFA (pulverized coal fly ash) grains entrained with reacted and unreacted sorbent and have lower bulk densities than PCFA grains because it contains higher concentrations of calcium and sulfur, and lower concentrations of silicon, aluminum and iron than PCFAs. AFBC residuals consist of spent bed which is a heterogeneous mixture of coarse-grained bed material and irregularly shaped, unfused, spherical PCFAs. The main crystalline phases in AFBC residuals are anhydrite (reacted sorbent), quartz and lime (unreacted sobent), calcite, hematite, periclase, magnetite and feldspars.The residuals produced by SDI contained 65%-70% PCFA with the larger sizes material being irregularly shaped, fused or roughedged. The reaction products of sorbent (portlandite and lime) included calcium sulfate (anhydrite) and calcium sulfate. The chemical properties of these residuals are similar to those of high calcium PCFAs because of the high alkalinity and high pH of these residuals.

  1. Land application uses for dry FGD by-products. Phase 1, [Annual report], December 1, 1991--November 30, 1992

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J.; Dick, W.; Forster, L.; Hitzhusen, F.; McCoy, E.; Stehouwer, R.; Traina, S.; Wolfe, W. [Ohio State Univ., Columbus, OH (United States); Haefner, R. [Geological Survey, Columbus, OH (United States). Water Resources Div.

    1993-04-01

    The 1990 amendments to the Clean Air Act have spurred the development of flue gas desulfurization (FGD) processes, several of which produce a dry, solid by-product material consisting of excess sorbent, reaction products containing sulfates and sulfites, and coal fly ash. Presently FGD by-product materials are treated as solid wastes and must be landfilled. However, landfill sites are becoming more scarce and tipping fees are constantly increasing. It is, therefore, highly desirable to find beneficial reuses for these materials provided the environmental impacts are minimal and socially acceptable. Phase 1 results of a 4 and 1/2 year study to demonstrate large volume beneficial uses of FGD by-products are reported. The purpose of the Phase 1 portion of the project was to characterize the chemical, physical, mineralogical and engineering properties of the FGD by-product materials obtained from various FGD technologies being developed in the state of Ohio. Phase 1 also involved the collection of baseline economic data related to the beneficial reuse of these FGD materials. A total of 58 samples were collected and analyzed. In summary Phase 1 results revealed that FGD by-product materials are essentially coal fly ash materials diluted with unreacted sorbent and reaction products. High volume beneficial reuses will depend on the economics of their substituting for existing materials for various types of applications (e.g. as an agricultural liming material, soil borrow for highway embankment construction, and reclamation of active and abandoned surface coal mines). Environmental constraints to the beneficial reuse of dry FGD byproduct materials, based on laboratory and leachate studies, seem to be less than for coal fly ash.

  2. Pseudomonas pseudoalcaligenes CECT5344, a cyanide-degrading bacterium with by-product (polyhydroxyalkanoates) formation capacity.

    Science.gov (United States)

    Manso Cobos, Isabel; Ibáñez García, María Isabel; de la Peña Moreno, Fernando; Sáez Melero, Lara Paloma; Luque-Almagro, Víctor Manuel; Castillo Rodríguez, Francisco; Roldán Ruiz, María Dolores; Prieto Jiménez, María Auxiliadora; Moreno Vivián, Conrado

    2015-06-10

    Cyanide is one of the most toxic chemicals produced by anthropogenic activities like mining and jewelry industries, which generate wastewater residues with high concentrations of this compound. Pseudomonas pseudoalcaligenes CECT5344 is a model microorganism to be used in detoxification of industrial wastewaters containing not only free cyanide (CN(-)) but also cyano-derivatives, such as cyanate, nitriles and metal-cyanide complexes. Previous in silico analyses suggested the existence of genes putatively involved in metabolism of short chain length (scl-) and medium chain length (mcl-) polyhydroxyalkanoates (PHAs) located in three different clusters in the genome of this bacterium. PHAs are polyesters considered as an alternative of petroleum-based plastics. Strategies to optimize the bioremediation process in terms of reducing the cost of the production medium are required. In this work, a biological treatment of the jewelry industry cyanide-rich wastewater coupled to PHAs production as by-product has been considered. The functionality of the pha genes from P. pseudoalcaligenes CECT5344 has been demonstrated. Mutant strains defective in each proposed PHA synthases coding genes (Mpha(-), deleted in putative mcl-PHA synthases; Spha(-), deleted in the putative scl-PHA synthase) were generated. The accumulation and monomer composition of scl- or mcl-PHAs in wild type and mutant strains were confirmed by gas chromatography-mass spectrometry (GC-MS). The production of PHAs as by-product while degrading cyanide from the jewelry industry wastewater was analyzed in batch reactor in each strain. The wild type and the mutant strains grew at similar rates when using octanoate as the carbon source and cyanide as the sole nitrogen source. When cyanide was depleted from the medium, both scl-PHAs and mcl-PHAs were detected in the wild-type strain, whereas scl-PHAs or mcl-PHAs were accumulated in Mpha(-) and Spha(-), respectively. The scl-PHAs were identified as homopolymers of 3

  3. Reuse of rapeseed by-products from biodiesel production

    Energy Technology Data Exchange (ETDEWEB)

    Krička, T.; Matin, A.; Voća, N.; Jurišić, V.; Bilandžija, N.

    2015-07-01

    The objective of this paper is to investigate usability of rapeseed cake from biodiesel fuel production as an energy source. For this research, rapeseed was grown at the research site of the Faculty of Agriculture in Zagreb, Croatia. The investigated rapeseed cake, residue from cold pressing, was divided in two groups of samples. The first group was a mix of three varieties (Bristol, Express and Navajo), while the other group consisted of three hybrids (Artus, Baldur, Titan). The utilization of rapeseed cake for energy via two routes was evaluated; namely, utilization of rapeseed cake as (1) solid biofuel (pellets) with addition of 3% of glycerol, and (2) as substrate in anaerobic digestion (AD). In investigation of cake as solid fuel, proximate (moisture content, ash content, fixed carbon and volatile matter), ultimate (content of carbon, sulphur, hydrogen, oxygen and nitrogen) and physical and calometry analyses (abrasion, diameter, length, density, higher and lower heating value were carried out. As for its use in AD, production of biogas during 40 days was monitored with a view of assessing the use of digested residue as fertilizer in agricultural production. Both groups of digested residues were analysed (pH, electroconductivity, moisture content, ash content, content of nitrogen and carbon, C/N ratio, content of P2O5, K2O, Ca, Mg, Na). The analysis indicated that the investigated raw material is usable as solid and gas biofuel, and digested residue as fertilizer in ecological agriculture. The two groups of samples analysed here did not show significant differences. (Author)

  4. Reuse of rapeseed by-products from biodiesel production

    Directory of Open Access Journals (Sweden)

    Tajana Krička

    2015-03-01

    Full Text Available The objective of this paper is to investigate usability of rapeseed cake from biodiesel fuel production as an energy source. For this research, rapeseed was grown at the research site of the Faculty of Agriculture in Zagreb, Croatia. The investigated rapeseed cake, residue from cold pressing, was divided in two groups of samples. The first group was a mix of three varieties (Bristol, Express and Navajo, while the other group consisted of three hybrids (Artus, Baldur, Titan. The utilization of rapeseed cake for energy via two routes was evaluated; namely, utilization of rapeseed cake as (1 solid biofuel (pellets with addition of 3% of glycerol, and (2 as substrate in anaerobic digestion (AD. In investigation of cake as solid fuel, proximate (moisture content, ash content, fixed carbon and volatile matter, ultimate (content of carbon, sulphur, hydrogen, oxygen and nitrogen and physical and calometry analyses (abrasion, diameter, length, density, higher and lower heating value were carried out. As for its use in AD, production of biogas during 40 days was monitored with a view of assessing the use of digested residue as fertilizer in agricultural production. Both groups of digested residues were analysed (pH, electroconductivity, moisture content, ash content, content of nitrogen and carbon, C/N ratio, content of P2O5, K2O, Ca, Mg, Na. The analysis indicated that the investigated raw material is usable as solid and gas biofuel, and digested residue as fertilizer in ecological agriculture. The two groups of samples analysed here did not show significant differences.

  5. Final Report: No{sub x} Emissions from By Product Fuel Combustion in Steel Making, September 15, 1996 - October 15, 1999

    Energy Technology Data Exchange (ETDEWEB)

    Pershing, David W.; Lighty, JoAnn S.; Eddings, Eric G.; Cacciatore, David A.

    1999-01-28

    Exhaust gases from the primary operations in the steel making process are almost exclusively utilized as supplemental fuels within the steel plant. These by-product fuels include blast furnace gas (BFG) and coke oven gas (COG) which contain mixtures of H{sub 2}, CO, CH{sub 4} and trace amounts of some heavier hydrocarbons and the impurities NH{sub 3} and HCN. These fuels are burned alone or in combination with natural gas to fire the coke ovens, blast furnace stoves utility boilers and metal working furnaces. The utilization of these by-product fuels reduces the waste gas emissions at the steel mill and reduces the requirements for outside fuel sources. However, as with primary fuel sources, the combustion of these by-product fuel blends does produce hazardous pollutants, in particular nitrogen oxides, and because these are atypical fuel blends of varying composition, the pollutant formation is not well understood. The objective of this research was to develop an understanding of the mechanisms controlling NO{sub x} formation from the combustion of by-product fuels from the steel industry and investigate control and design options to minimize emissions. The minimization strategies investigated were constrained by limits on CO and hydrocarbon emissions, both of which increased under fuel-rich combustion scenarios that resulted in reduced NO{sub x} emissions. Also, the minimization strategies were constrained by the need for reasonable heat generation rates in the furnaces that employ these by-product fuels, so that product steel quality is not adversely affected.

  6. Landfill gas

    Energy Technology Data Exchange (ETDEWEB)

    Willumsen, H. (Crone and Koch, Viborg (Denmark))

    1990-08-01

    In most landfills, the refuse deposit usually has a high content of organic matter consisting of a mixture of household, industrial and garden waste. Immediately after the refuse has been placed in the landfill, aerobic decomposition of the organic waste begins. Once the oxygen has been exhausted, anaerobic decomposition begins. 'Biogas' is produced which has a methane content of approximately 50% and can be used as a fuel. The exploitation of landfill gas for energy purposes was initiated in the USA around 1975 and later in Europe. A landfill gas plant consists of a recovery system and a production system. A recovery system can consist of vertical perforated pipe wells, horizontal perforated pipes or ditches, or membrane covers to collect the generated gas. Under normal conditions it will not be necessary to process the gas except for the removal of water and other impurities (e.g. solid particles) if the gas is to be used in a boiler or engine. In the USA most often only power is produced, whereas in Europe the waste heat is normally exploited, making the plant function as a combined power and heating plant. It is also possible to upgrade the landfill gas to a methane content of nearly 100, after which it can be distributed with natural gas. There are several such plants in the USA. 8 refs., 6 figs., 6 tabs.

  7. Gas turbines

    Energy Technology Data Exchange (ETDEWEB)

    Farahan, E.; Eudaly, J.P.

    1978-10-01

    This evaluation provides performance and cost data for commercially available simple- and regenerative-cycle gas turbines. Intercooled, reheat, and compound cycles are discussed from theoretical basis only, because actual units are not currently available, except on a special-order basis. Performance characteristics investigated include unit efficiency at full-load and off-design conditions, and at rated capacity. Costs are tabulated for both simple- and regenerative-cycle gas turbines. The output capacity of the gas turbines investigated ranges from 80 to 134,000 hp for simple units and from 12,000 to 50,000 hp for regenerative units.

  8. Gas hydrates

    Digital Repository Service at National Institute of Oceanography (India)

    Ramprasad, T.

    and the role it plays in the global climate and the future of fuels. Russia, Japan, Nigeria, Peru, Chile, Pakistan, Indonesia, Korea, etc are various countries who are perusing the gas hydrates studies as a future resource for fuel. Indian Initiative..., 1993, Free gas at the base of the gas hydrate zone in the vicinity of the Chile Triple junction: Geology, v. 21, pp. 905-908. Borowski, W.S., C.K. Paull, and U. William, III, 1999, Global and local variations of interstitial sulfate gradients...

  9. Methane emission of Santa Inês sheep fed cottonseed by-products containing different levels of gossypol.

    Science.gov (United States)

    Lima, Paulo de Mello Tavares; Oliveira, Pedro Batelli; Campeche, Aline; Moreira, Guilherme Dias; Paim, Tiago do Prado; McManus, Concepta; Abdalla, Adibe Luiz; Dantas, Angela Maria Morais; de Souza, Jurandir Rodrigues; Louvandini, Helder

    2014-01-01

    The aim of this study was to evaluate the methane (CH4) emission of Santa Inês sheep fed cottonseed by-products, verifying if the gossypol content of these feedstuffs affects CH4 emission. Twelve late-lactating Santa Inês sheep (44.8 ± 7.5 kg body weight (BW)) were allocated in metabolic cages for an experimental period of 19 days, 14 days for adaptation and 5 days for measuring CH4 emission and dry matter intake (DMI). The animals were divided into four treatments, established in accordance with the cottonseed by-product used in concentrate formulation: Control (CON - no cottonseed by-product), Whole cottonseed (WCS), Cottonseed cake (CSC), and Cottonseed meal (CSM). The free gossypol level of the concentrates were 0, 1,276, 350, and 190 ppm for CON, WCS, CSC, and CSM, respectively. Also, the animals received Cynodon dactylon cv. Coast Cross hay, water, and mineral salt ad libitum. The ether extract content of the diets was balanced between treatments by including soybean oil in concentrates. The technique used to measure the CH4 emission was the sulfur hexafluoride (SF6) tracer technique, and the gas samples collected were quantified by analysis in gas chromatography system. The CH4 emission was evaluated considering the daily emission (g CH4/day); DMI (g CH4/kg DMI); and BW (g CH4/kg BW). No statistical difference was found (P > 0.05) between treatments for DMI and CH4 parameters. In the regression analysis, no significant relation (P > 0.05) between gossypol content and CH4 emission was observed. These results suggest that gossypol does not affect rumen methanogenesis.

  10. Gas gangrene

    Science.gov (United States)

    ... also can be caused by group A streptococcus, Staphylococcus aureus, and Vibrio vulnificus . Clostridium is found nearly everywhere. As the bacteria grow inside the body, it makes gas and harmful substances (toxins) that can damage body tissues, cells, and blood ...

  11. Status and Development of Natural Gas Utilization in China

    Institute of Scientific and Technical Information of China (English)

    Wu Kangyu; Ma An

    1995-01-01

    @@ Recently, the world's proven reserves of natural gas are increasing and are likely to exceed those of oil within the future one or two decades.Natural gas has efficient and clean-burning characteristics. Many countries attach importance to the natural gas utilization. Now China is the fifth largest oil producing country and produced 147 million tons of crude oil in 1994. As natural gas once was regarded as a useless by-product of oil production, so the output of natural gas is low in comparison with that of crude oil. China is now the twentifourth natural gas producing country based on gas output and produced 16. 67 billion cubic meters natural gas in 1994. Natural gas consumption occupies only two percent of total energy consumption in China. With the growth of economy and improvement of exploration and development technologies,it is sure that the output and utilization of natural gas will develop greatly before 2000 in China.

  12. Gas flaring reduction in the Indonesian oil and gas sector: Technical and economic potential of clean development mechanism (CDM) projects

    OpenAIRE

    2005-01-01

    Indonesia currently ranks as the world's 17th oil and 6th gas producer, but its production levels are slowly declining. In Indonesia, the oil companies may extract, process and market associated gas jointly with the State Oil and Gas Board. In addition, they are allowed to use associated gas in operations, as well as re-inject or flare gas that cannot be marketed. However, associated gas is still considered as a by-product of oil, which can disturb the oil flow. Due to the lack of markets, in...

  13. Frontier of CO{sub 2} reduction/sink with international Win/Win Corporation - coal fired electric power generation helps afforestation through by product utilization

    Energy Technology Data Exchange (ETDEWEB)

    Yoshitaka, N.; Kaori, A.; Kazuo, W.; Katsumi, O. [Central Research Institute of Electric Power Industry, Tokyo (Japan)

    2001-07-01

    Several countries in Asia require coal fired electric power generation because they are rich in domestic coal. In common sense, coal firing generates carbon dioxide and sulfur dioxide more than natural gas, thus it tends to be disliked for electric power generation. When desulfurization plants are housed, these cost much and produce valuable by-poducts. Gypsum is a by-product from desulfurization plant, which can reclaim very poor alkaline or sodic soil and the combination of gypsum and quick lime is a by-product from fluidized-bed boiler and bio-briquet, which can reclaim very poor acidic soil. These two principal by-products are the key to afforestation, resulting in carbon sink. Sometimes soil reclamation can change poor soil into fertile soil which is useful for agriculture. 2 tabs.

  14. Determination of the minor disinfection by-products formed in the water plant of Sant Joan Despi (Barcelona, Spain); Determinacion de los subproductos de desinfeccion minoritarios formados en la planta de Sant Joan Despi (Barcelona)

    Energy Technology Data Exchange (ETDEWEB)

    Cancho, B.; Galceran, M.T. [Universitat de Barcelona (Spain); Ventura, F. [AGBAR. Societat General d` Aigues de Barcelona, S.A. (Spain)

    1997-09-01

    Chlorine is widely used in drinking water disinfection due to be a powerful and not expense disinfection. Although the benefits of disinfection, the formation of stable disinfection by-products of the health concern, is the result of the interaction of aqueous chlorine with natural organic matter presents in water. Disinfection by-products generated in major concentration are trihalomethane and haloacetic acids. Disinfection by-products generated in minor concentration are haloacetonitriles, haloketones,chloral hydrate and chloropicrin and some new groups such as cyanogen halides and trihaloacetaldydes. In this work two analytical methods.: headspace/gas chromatography/electron capture detector and liquid-liquid microextraction/gas chromatography/electron capture detector are studied and compared to determine the minor by-products and to establish finally, a systematic control of them in the different stages of the Water Treatment Plant of San Joan Despi (Barcelona, Spain). (Author) 12 refs.

  15. The spontaneous combustion of coal and its by-products in the Witbank and Sasolburg coalfields of South Africa

    Energy Technology Data Exchange (ETDEWEB)

    Pone, J. Denis N. [Energy and Geo-Environmental Engineering, The Pennsylvania State University, 228 Housler Building, University Park, PA 16802 (United States); Hein, Kim A.A. [School of Geosciences, University of the Witwatersrand Johannesburg, P/Bag 3, 2050, WITS (South Africa); Stracher, Glenn B. [Division of Science and Mathematics, East Georgia College, Swainsboro, Georgia 30401 (United States); Annegarn, Harold J. [Department of Geography and Environmental Management, University of Johannesburg, P.O. Box 524, Auckland Park, 2006 (South Africa); Finkleman, Robert B. [University of Texas at Dallas, Department of Geosciences, Richardson, TX 75083-0688 (United States); Blake, Donald R. [Department of Chemistry, 570 Rowland Hall, University of California, Irvine, CA 92697-2025 (United States); McCormack, John K. [Electron Microbeam Facility, Department of Geological Sciences, MS 172, Mackay School of Mines, University of Nevada, Reno, Navada 8955-0047 (United States); Schroeder, Paul [Department of Geology, University of Georgia, 210 Field Street, Athens, GA 30602-2501 (United States)

    2007-10-01

    Spontaneous combustion of coal seams in the Witbank and Sasolburg coalfields, South Africa, was studied in order to determine if toxic chemical elements and compounds are being mobilised into the environment. Samples of the minerals forming on the surface of coal seams, and gases escaping from vents, were analysed to verify the presence of these elements and compounds. Gas temperature measurements at coal-fire vents range from 34 C to 630 C. The coal-fire gas minerals (CFGM) identified included sulphur compounds and salammoniac. X-ray diffraction (XRD) studies of CFGM by-products confirmed the presence of mascagnite ((NH{sub 4}){sub 2}SO{sub 4}), illite ((Al,Si){sub 4}O{sub 10}[(OH){sub 2},H{sub 2}O]) letovicite ((NH{sub 4}){sub 3}H(SO{sub 4}){sub 2}), phlogopite (KMg{sub 3}(AlSi{sub 3})O{sub 10}(F,OH){sub 2}), titanium dioxide (TiO{sub 2}), barite (BaSO{sub 4}), iron sulphate (FeSO{sub 4}), gypsum (CaSO{sub 4}.2H{sub 2}O) and silicate. An unknown and unclassified sulphur-nitrogen-chlorine CFGM was also identified. The minerals are interpreted to have formed by condensation or sublimation; several may be alteration products. Other heavy elements found in the CFGM's are mercury, arsenic, lead, zinc, and copper. Arsenic and mercury were the major elements of potential environmental significance found accumulating around coal-fire vents. Relatively high concentrations of toluene, benzene and xylene were found in the gas collected at both Witbank and Sasolburg coalfields. Benzene, toluene and xylenes are known to possess carcinogenic proprieties. Thirty-two aliphatic compounds were detected, as well as halogenated compounds including bromomethane, iodomethane and trichloromethane in low concentrations, and dichloromethane and chloromethane in high concentrations. The highest concentrations of halogenated compounds were measured for gas samples from the Witbank coalfield. High concentrations of carbon monoxide, carbon dioxide, and methane were also detected. The

  16. Greenhouse gas mitigation with scarce land

    DEFF Research Database (Denmark)

    Meyer-Aurich, A; Olesen, Jørgen E; Prochnow, A;

    2013-01-01

    Agricultural lands have been identified to mitigate greenhouse gas (GHG) emissions primarily by production of energy crops and substituting fossil energy resources and through carbon sequestration in soils. Increased fertilizer input resulting in increased yields may reduce the area needed for crop...

  17. Humin based by-products from biomass processing as a potential carbonaceous source for synthesis gas production

    NARCIS (Netherlands)

    Hoang, T.M.C.; Eck, van E.R.H.; Bula, W.P.; Gardeniers, J.G.E.; Lefferts, L.; Seshan, K.

    2015-01-01

    Lignocellulosic biomass is addressed as potential sustainable feedstock for green fuels and chemicals. (Hemi)cellulose is the largest constituent of the material. Conversion of these polysaccharides to bio-based platform chemicals is important in green chemical/fuel production and biorefinery. Hydro

  18. Re-use of clean coal technology by-products in construction of low permeability liners

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, W.E.; Butalia, T.S.; Whitlatch, E.E.; Mitsch, W.

    2000-12-01

    This final project report presents the results of a research program conducted at The Ohio State University from October 1, 1996 to March 31, 2000 to investigate the use of stabilized flue gas desulfurization (FGD) materials in the construction of low permeability liners. The small scale laboratory tests, medium scale mesocosm wetland experiments, and construction and monitoring of a full-scale FGD lined facility (capacity of one million gallons) shows that stabilized FGD materials can be used as low permeability liners in the construction of water and manure holding ponds, and constructed wetlands for wastewater treatment. Actual permeability coefficients in the range of 10{sup -7} cm/sec (3 x 10{sup -9} ft/sec) can be obtained in the field by properly compacting lime and fly ash enriched stabilized FGD materials. Leachate from the FGD material meets Ohio's non-toxic criteria for coal combustion by-products, and for most potential contaminants the national primary and secondary drinking water standards are also met. The low permeability non-toxic FGD material investigated in this study poses very minimal risks, if any, for groundwater contamination. Construction FGD-lined wetlands offer the opportunity for increased phosphorus retention giving rise to the potential use of these materials as a liners for wastewater treatment wetlands. While plant growth was observed to be less vigorous for FGD lined wetland mesocosms compared to the control, the above and below ground biomass were not significantly different. Cost estimates for FGD liners compared favourably with clay liners for varying haul distances.

  19. Gas sensor

    Science.gov (United States)

    Schmid, Andreas K.; Mascaraque, Arantzazu; Santos, Benito; de la Figuera, Juan

    2014-09-09

    A gas sensor is described which incorporates a sensor stack comprising a first film layer of a ferromagnetic material, a spacer layer, and a second film layer of the ferromagnetic material. The first film layer is fabricated so that it exhibits a dependence of its magnetic anisotropy direction on the presence of a gas, That is, the orientation of the easy axis of magnetization will flip from out-of-plane to in-plane when the gas to be detected is present in sufficient concentration. By monitoring the change in resistance of the sensor stack when the orientation of the first layer's magnetization changes, and correlating that change with temperature one can determine both the identity and relative concentration of the detected gas. In one embodiment the stack sensor comprises a top ferromagnetic layer two mono layers thick of cobalt deposited upon a spacer layer of ruthenium, which in turn has a second layer of cobalt disposed on its other side, this second cobalt layer in contact with a programmable heater chip.

  20. Natural gas conversion process

    Energy Technology Data Exchange (ETDEWEB)

    1992-01-01

    The experimental apparatus was dismantled and transferred to a laboratory space provided by Lawrence Berkeley Laboratory (LBL) which is already equipped with a high-ventilation fume hood. This will enable us to make tests at higher gas flow rates in a safe environment. Three papers presented at the ACS meeting in San Francisco (Symposium on Natural Gas Upgrading II) April 5--10, 1992 show that the goal of direct catalytic conversion of Methane into heavier Hydrocarbons in a reducing atmosphere is actively pursued in three other different laboratories. There are similarities in their general concept with our own approach, but the temperature range of the experiments reported in these recent papers is much lower and this leads to uneconomic conversion rates. This illustrates the advantages of Methane activation by a Hydrogen plasma to reach commercial conversion rates. A preliminary process flow diagram was established for the Integrated Process, which was outlined in the previous Quarterly Report. The flow diagram also includes all the required auxiliary facilities for product separation and recycle of the unconverted feed as well as for the preparation and compression of the Syngas by-product.

  1. Natural Gas Transport

    OpenAIRE

    Tomás Correa; Nelson Osorio

    2009-01-01

    This paper reviews the present and future on natural gas transportation options, from oil and gas fields to markets, including liquefied natural gas, gas pipeline, compressed natural gas, natural gas hydrates, and gas to liquids and the perspectives of using them in Colombia, since this is the main fuel alternative to supply the world in at least the next 50 years.

  2. Natural Gas Transport

    Directory of Open Access Journals (Sweden)

    Tomás Correa

    2009-06-01

    Full Text Available This paper reviews the present and future on natural gas transportation options, from oil and gas fields to markets, including liquefied natural gas, gas pipeline, compressed natural gas, natural gas hydrates, and gas to liquids and the perspectives of using them in Colombia, since this is the main fuel alternative to supply the world in at least the next 50 years.

  3. Wood gas; Holz gibt Gas

    Energy Technology Data Exchange (ETDEWEB)

    Hilgers, Claudia

    2011-06-17

    Sixty years ago, wood gas was even used as a car fuel. Today, this ancient technology is experiencing a renaissance. Small cogeneration plants with wood gasifiers are ideal for renewable and decentral power supply concepts for tomorrow. Until then, there is much pioneering work to do until plants will be ready for serial production.

  4. EVALUATION OF NUTRITIVE VALUE AND IN VITRO METHANE PRODUCTION OF FEEDSTUFFS FROM AGRICULTURAL AND FOOD INDUSTRY BY-PRODUCTS

    Directory of Open Access Journals (Sweden)

    B. Santoso

    2014-10-01

    Full Text Available The aim of this research was to evaluate the nutrient degradability, in vitro methane (CH4 production ofseveral agricultural and food industry by-products in relation to their chemical composition. Twenty-onesamples of 7 feedstuffs from agricultural and food industry by-products consisted of corn straw, potatostraw, rice straw, cocoa pod, sago waste, rice bran, soybean curd residue were evaluated by an in vitro gasproduction and nutrient degradability. The feedstuffs varied greatly in their crude protein (CP, neutraldetergent fiber (NDF and non-fiber carbohydrate (NFC contents. Crude protein ranged from 1.5 to 21.8%,NDF from 31.6 to 71.1% and NFC from 1.5 to 50.8%. Among the seven feedstuffs, soybean curd residuehad the highest CP content, on the other hand it had the lowest NDF content. Dry matter (DM and organicmatter (OM degradability were highest (P<0.01 in soybean curd residue among the feedstuffs. The CH4production was significantly higher (P<0.01 in rice straw, cocoa pod and corn straw as compared to sagowaste. There was a strong positive correlation (r = 0.60; P<0.01 between NDF concentration and CH4production. However, the total gas productions was negatively correlated (r = -0.75; P<0.01 with NDFcontent. The CH4 production of feedstuff is influenced by NDF content.

  5. Volcanic gas

    Science.gov (United States)

    McGee, Kenneth A.; Gerlach, Terrance M.

    1995-01-01

    In Roman mythology, Vulcan, the god of fire, was said to have made tools and weapons for the other gods in his workshop at Olympus. Throughout history, volcanoes have frequently been identified with Vulcan and other mythological figures. Scientists now know that the “smoke" from volcanoes, once attributed by poets to be from Vulcan’s forge, is actually volcanic gas naturally released from both active and many inactive volcanoes. The molten rock, or magma, that lies beneath volcanoes and fuels eruptions, contains abundant gases that are released to the surface before, during, and after eruptions. These gases range from relatively benign low-temperature steam to thick hot clouds of choking sulfurous fume jetting from the earth. Water vapor is typically the most abundant volcanic gas, followed by carbon dioxide and sulfur dioxide. Other volcanic gases are hydrogen sulfide, hydrochloric acid, hydrogen, carbon monoxide, hydrofluoric acid, and other trace gases and volatile metals. The concentrations of these gas species can vary considerably from one volcano to the next.

  6. Hazard Analysis and identification of Critical Control Points of collagen extraction from cod by-products

    NARCIS (Netherlands)

    Aalberts, C.H.J.

    2004-01-01

    The aim of the European research project “UTILISATION AND STABILISATION OF BY-PRODUCTS FROM COD SPECIES” (QLK1-CT-2000-01017 QLRT-2001-02829) is to investigate whether collagen from fish by-products could serve as an important raw material in high quality food. Since Atlantic cod is a major commodit

  7. Acid mine drainage treatment using by-products from quicklime manufacturing as neutralization chemicals.

    Science.gov (United States)

    Tolonen, Emma-Tuulia; Sarpola, Arja; Hu, Tao; Rämö, Jaakko; Lassi, Ulla

    2014-12-01

    The aim of this research was to investigate whether by-products from quicklime manufacturing could be used instead of commercial quicklime (CaO) or hydrated lime (Ca(OH)2), which are traditionally used as neutralization chemicals in acid mine drainage treatment. Four by-products were studied and the results were compared with quicklime and hydrated lime. The studied by-products were partly burnt lime stored outdoors, partly burnt lime stored in a silo, kiln dust and a mixture of partly burnt lime stored outdoors and dolomite. Present application options for these by-products are limited and they are largely considered waste. Chemical precipitation experiments were performed with the jar test. All the studied by-products removed over 99% of Al, As, Cd, Co, Cu, Fe, Mn, Ni, Zn and approximately 60% of sulphate from acid mine drainage. However, the neutralization capacity of the by-products and thus the amount of by-product needed as well as the amount of sludge produced varied. The results indicated that two out of the four studied by-products could be used as an alternative to quicklime or hydrated lime for acid mine drainage treatment. Copyright © 2014 Elsevier Ltd. All rights reserved.

  8. Preserving high-protein fish by-products through silages and fermentates

    Science.gov (United States)

    n Alaska, over three million metric tons of fish by-products are generated each year. However, due to the remote locations and seasonal nature of salmon fisheries, by-products are generally not fully utilized unless a fish meal plant is located nearby. Acidification is a common method for inhibiting...

  9. Nutritional diversity of agricultural and agro-industrial by-products for ruminant feeding

    Directory of Open Access Journals (Sweden)

    J.A.G. Azevêdo

    2012-10-01

    Full Text Available Fifty-seven by-products were collected from regions throughout Brazil. Chemical composition, in vitro neutral detergent fiber digestibility (IVNDFD, and total digestible nutrients (TDN were determined with the objective of grouping by-products with similar nutritional characteristics. The by-products belonging to group one (G1 presented the highest content of neutral detergent fiber exclusive of ash and nitrogenous compounds [aNDFom(n] and lowest energy content, with 42.5% and 38.8% of IVNDFD and TDN, respectively. A new cluster analysis was carried in order to better characterize G2 by-products, six subgroups (SGs were established (SG1 to SG6. SG1 by-products had the highest and the lowest values for lignin and TDN, respectively. SG2 by-products had the highest aNDFom(n value, with TDN and IVNDFD values greater than 600 and 700g/kg, respectively, and crude protein (CP value below 200g/kg in dry matter (DM. Among all the subgroups, SG3 had the highest TDN (772g/kg and IVNDFD (934g/kg values and the lowest lignin (23g/kg in DM value. The ether extract was what most influenced the hierarchical establishment of residual grouping in SG4. SG5 by-products had the highest concentration of non-fibrous carbohydrate. Different from the other subgroups, SG6 by-products had the highest value of available CP.

  10. 40 CFR 63.302 - Standards for by-product coke oven batteries.

    Science.gov (United States)

    2010-07-01

    ... batteries. 63.302 Section 63.302 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) AIR... National Emission Standards for Coke Oven Batteries § 63.302 Standards for by-product coke oven batteries... oven emissions from each affected existing by-product coke oven battery that exceed any of...

  11. In situ ruminal crude protein degradability of by-products from cereals, oilseeds and animal origin

    NARCIS (Netherlands)

    Habib, G.; Khan, N.A.; Ali, M.; Bezabih, M.

    2013-01-01

    The aim of this study was to establish a database on in situ ruminal crude protein (CP) degradability characteristics of by-products from cereal grains, oilseeds and animal origin commonly fed to ruminants in Pakistan and South Asian Countries. The oilseed by-products were soybean meal, sunflower me

  12. Mango (Mangifera indica L.) by-products and their valuable components: a review.

    Science.gov (United States)

    Jahurul, M H A; Zaidul, I S M; Ghafoor, Kashif; Al-Juhaimi, Fahad Y; Nyam, Kar-Lin; Norulaini, N A N; Sahena, F; Mohd Omar, A K

    2015-09-15

    The large amount of waste produced by the food industries causes serious environmental problems and also results in economic losses if not utilized effectively. Different research reports have revealed that food industry by-products can be good sources of potentially valuable bioactive compounds. As such, the mango juice industry uses only the edible portions of the mangoes, and a considerable amount of peels and seeds are discarded as industrial waste. These mango by-products come from the tropical or subtropical fruit processing industries. Mango by-products, especially seeds and peels, are considered to be cheap sources of valuable food and nutraceutical ingredients. The main uses of natural food ingredients derived from mango by-products are presented and discussed, and the mainstream sectors of application for these by-products, such as in the food, pharmaceutical, nutraceutical and cosmetic industries, are highlighted. Copyright © 2015 Elsevier Ltd. All rights reserved.

  13. Wheat milling by-products and their impact on bread making.

    Science.gov (United States)

    Hemdane, Sami; Leys, Sofie; Jacobs, Pieter J; Dornez, Emmie; Delcour, Jan A; Courtin, Christophe M

    2015-11-15

    This study investigates the relationship between the properties of dietary fiber (DF) rich wheat milling by-products and their impact on bread making. From coarse bran over coarse and fine weatings to low grade flour, the content of starch and lipids increased, while that of DF and ash decreased. Enzyme activity levels differed strongly and were not related to other by-product properties. Average particle size of the by-products was positively correlated with DF and ash contents and their hydration properties. When meals from flour and by-products were composed on the same overall starch level to compensate for differences in endosperm contamination in the by-products, bread specific volume was more strongly depressed with fine weatings and low grade flour than with coarse bran and weatings. This suggests that the properties of the former were intrinsically more detrimental to bread making than those of the latter.

  14. Integrated Disinfection By-Products Mixtures Research: Concentration by Reverse Osmosis Membrane Techniques of Disinfection By-Products from Water Disinfected by Chlorination and Ozonation/Postchlorination

    Science.gov (United States)

    To conduct the health-effect studies described in subsequent articles in this series, concentrated aqueous mixtures of disinfection by-products were required for the two water treatment trains described in the preceding article (Miltner et al., 2008). To accomplish this, the fini...

  15. Integrated Disinfection By-Products Mixtures Research: Concentration by Reverse Osmosis Membrane Techniques of Disinfection By-Products from Water Disinfected by Chlorination and Ozonation/Postchlorination

    Science.gov (United States)

    To conduct the health-effect studies described in subsequent articles in this series, concentrated aqueous mixtures of disinfection by-products were required for the two water treatment trains described in the preceding article (Miltner et al., 2008). To accomplish this, the fini...

  16. Mercury and Air Toxic Element Impacts of Coal Combustion By-Product Disposal and Utilizaton

    Energy Technology Data Exchange (ETDEWEB)

    David Hassett; Loreal Heebink; Debra Pflughoeft-Hassett; Tera Buckley; Erick Zacher; Mei Xin; Mae Sexauer Gustin; Rob Jung

    2007-03-31

    The University of North Dakota Energy & Environmental Research Center (EERC) conducted a multiyear study to evaluate the impact of mercury and other air toxic elements (ATEs) on the management of coal combustion by-products (CCBs). The ATEs evaluated in this project were arsenic, cadmium, chromium, lead, nickel, and selenium. The study included laboratory tasks to develop measurement techniques for mercury and ATE releases, sample characterization, and release experiments. A field task was also performed to measure mercury releases at a field site. Samples of fly ash and flue gas desulfurization (FGD) materials were collected preferentially from full-scale coal-fired power plants operating both without and with mercury control technologies in place. In some cases, samples from pilot- and bench-scale emission control tests were included in the laboratory studies. Several sets of 'paired' baseline and test fly ash and FGD materials collected during full-scale mercury emission control tests were also included in laboratory evaluations. Samples from mercury emission control tests all contained activated carbon (AC) and some also incorporated a sorbent-enhancing agent (EA). Laboratory release experiments focused on measuring releases of mercury under conditions designed to simulate CCB exposure to water, ambient-temperature air, elevated temperatures, and microbes in both wet and dry conditions. Results of laboratory evaluations indicated that: (1) Mercury and sometimes selenium are collected with AC used for mercury emission control and, therefore, present at higher concentrations than samples collected without mercury emission controls present. (2) Mercury is stable on CCBs collected from systems both without and with mercury emission controls present under most conditions tested, with the exception of vapor-phase releases of mercury exposed to elevated temperatures. (3) The presence of carbon either from added AC or from unburned coal can result in mercury

  17. Mitigation strategies in the agro-food sector: The anaerobic digestion of tomato purée by-products. An Italian case study.

    Science.gov (United States)

    Bacenetti, Jacopo; Duca, Daniele; Negri, Marco; Fusi, Alessandra; Fiala, Marco

    2015-09-01

    Tomato processing involves a significant production of residues, mainly constituted by discarded tomatoes, skins, seeds and pulp. Often, these residues are not valorized and represent an added cost for manufacturing companies because of disposal processes, with environmental issues due to the difficult management. The exploitation of these residual materials results complex as their availability is mainly concentrated in few months. A possible solution is the production of biogas employed in a Combine Heat and Power engine for energy production, in line with the 2020 targets of European Union in terms of promotion of energy from renewable resources and greenhouse gas emission reduction. The tomato by-product utilization for energy production as a strategy to reduce the environmental load of tomato purée was evaluated by means of Life Cycle Assessment. Two scenarios were considered: Baseline Scenario - tomato by-products are sent back to the tomato fields as organic fertilizers; Alternative Scenario - tomato by-products are employed in a nearby biogas plant for energy production. Methane production of tomato by-products was assessed by means of specific laboratory tests. The comparison between the two scenarios highlighted reductions for all the impact categories with the Alternative Scenario. The most important reductions are related to particulate matter (-5.3%), climate change (-6.4%) and ozone depletion (-13.4%). Although small, the reduction of the environmental impact cannot be neglected; for example for climate change, the anaerobic digestion of by-products allows a saving of GHG emissions that, over the whole year, is equal to 1.567 tons of CO2 eq. The results of this study could be up-scaled to the food industries with high heat demand producing considerable amounts of fermentable by-products employable as feedstock for biogas production. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. The Potential of Animal By-Products in Food Systems: Production, Prospects and Challenges

    Directory of Open Access Journals (Sweden)

    Babatunde O. Alao

    2017-06-01

    Full Text Available The consumption of animal by-products has continued to witness tremendous growth over the last decade. This is due to its potential to combat protein malnutrition and food insecurity in many countries. Shortly after slaughter, animal by-products are separated into edible or inedible parts. The edible part accounts for 55% of the production while the remaining part is regarded as inedible by-products (IEBPs. These IEBPs can be re-processed into sustainable products for agricultural and industrial uses. The efficient utilization of animal by-products can alleviate the prevailing cost and scarcity of feed materials, which have high competition between animals and humans. This will also aid in reducing environmental pollution in the society. In this regard, proper utilization of animal by-products such as rumen digesta can result in cheaper feed, reduction in competition and lower cost of production. Over the years, the utilization of animal by-products such as rumen digesta as feed in livestock feed has been successfully carried out without any adverse effect on the animals. However, there are emerging gaps that need to be further addressed regarding the food security and sustainability of the products. Therefore, the objective of this review highlights the efficacy and effectiveness of using animal by-products as alternative sources of feed ingredients, and the constraints associated with their production to boost livestock performance in the industry at large.

  19. Quantification of bioactive compounds in pulps and by-products of tropical fruits from Brazil.

    Science.gov (United States)

    Ribeiro da Silva, Larissa Morais; Teixeira de Figueiredo, Evania Altina; Silva Ricardo, Nagila Maria Pontes; Pinto Vieira, Icaro Gusmao; Wilane de Figueiredo, Raimundo; Brasil, Isabella Montenegro; Gomes, Carmen L

    2014-01-15

    This study aimed to quantify the levels of resveratrol, coumarin, and other bioactives in pulps and by-products of twelve tropical fruits from Brazil obtained during pulp production process. Pineapple, acerola, monbin, cashew apple, guava, soursop, papaya, mango, passion fruit, surinam cherry, sapodilla, and tamarind pulps were evaluated as well as their by-products (peel, pulp's leftovers, and seed). Total phenolic, anthocyanins, yellow flavonoids, β-carotene and lycopene levels were also determined. Resveratrol was identified in guava and surinam cherry by-products and coumarin in passion fruit, guava and surinam cherry by-products and mango pulp. These fruit pulp and by-products could be considered a new natural source of both compounds. Overall, fruit by-products presented higher (P<0.05) bioactive content than their respective fruit pulps. This study provides novel information about tropical fruits and their by-products bioactive composition, which is essential for the understanding of their nutraceutical potential and future application in the food industry.

  20. Speciation and distribution of vanadium in drinking water iron pipe corrosion by-products.

    Science.gov (United States)

    Gerke, Tammie L; Scheckel, Kirk G; Maynard, J Barry

    2010-11-01

    Vanadium (V) when ingested from drinking water in high concentrations (>15 μg L(-1)) is a potential health risk and is on track to becoming a regulated contaminant. High concentrations of V have been documented in lead corrosion by-products as Pb(5)(V(5+)O(4))(3)Cl (vanadinite) which, in natural deposits is associated with iron oxides/oxyhydroxides, phases common in iron pipe corrosion by-products. The extent of potential reservoirs of V in iron corrosion by-products, its speciation, and mechanism of inclusion however are unknown. The aim of this study is to assess these parameters in iron corrosion by-products, implementing synchrotron-based μ-XRF mapping and μ-XANES along with traditional physiochemical characterization. The morphologies, mineralogies, and chemistry of the samples studied are superficially similar to typical iron corrosion by-products. However, we found V present as discrete grains of Pb(5)(V(5+)O(4))(3)Cl likely embedded in the surface regions of the iron corrosion by-products. Concentrations of V observed in bulk XRF analysis ranged from 35 to 899 mg kg(-1). We calculate that even in pipes with iron corrosion by-products with low V concentration, 100 mg kg(-1), as little as 0.0027% of a 0.1-cm thick X 100-cm long section of that corrosion by-product needs to be disturbed to increase V concentrations in the drinking water at the tap to levels well above the 15 μg L(-1) notification level set by the State of California and could adversely impact human health. In addition, it is likely that large reservoirs of V are associated with iron corrosion by-products in unlined cast iron mains and service branches in numerous drinking water distribution systems.

  1. Sweet gas

    Science.gov (United States)

    Showstack, Randy

    When poisonous hydrogen sulfide contaminates a natural gas deposit, the drilling company usually caps the well and moves on to other areas that may contain larger reserves and offer stronger economic incentives. Chemical and biological methods exist to purify these wells, but most are complex and costly. However, a group of scientists now is developing what could be a cheaper, easier method to clean up and utilize this polluted natural gas.The technique—which involves growing “enrichment” cultures of bacteria that metabolize the hydrogen sulfide into harmless compounds—could be particularly useful to poor and energy-starved developing nations, says Norman Wainwright, a senior scientist at the Woods Hole Marine Biological Laboratory. “We're hoping the technique can be robust enough and inexpensive enough to be used in a developing country,” Wainwright says. Other scientists involved with the project are Porter Anderson, a University of Rochester professor emeritus associated with the lab and Ben Ebenhack, also of Rochester.

  2. Economical Utilization of Associated Gas in Nigeria

    Directory of Open Access Journals (Sweden)

    Lukman Obayopo Alimi

    2014-07-01

    Full Text Available Oil production is often accompanied by associated natural gas as valuable by-product of oil processing. Large amount of this vital energy component is flared during these processes, mostly in developing countries. For a longer period of time more gas is flares in Nigeria than anywhere else in Africa and second to Russian in the world, with daily estimates of roughly 2.5 billion cubic feet. This is equivalent to around 40% of all Africa´s natural gas consumption, and annual financial loss to Nigeria is about 1.8 billion Euros. Gas flaring contributes to major environmental pollution problems, which affects oil producing areas of the Niger Delta in Nigeria. This research attempts to look into the environmental issues in the region and proposes possible solutions, with recommendations that will contribute to improve associated gas utilization. This study describes gas to liquid (GTL conversion technology as a sustainable option to utilize associated gas in Nigeria, and also evaluates the economic attractiveness of the process. This conversion technology could contribute to total elimination of gas flaring and reduces the overdependence on importation of refined products (petrol, diesel and kerosene from foreign countries into Nigeria.

  3. By-Product Formation in Repetitive PCR Amplification of DNA Libraries during SELEX

    DEFF Research Database (Denmark)

    Tolle, Fabian; Wilke, Julian; Wengel, Jesper

    2014-01-01

    The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target-recogniz......The selection of nucleic acid aptamers is an increasingly important approach to generate specific ligands binding to virtually any molecule of choice. However, selection-inherent amplification procedures are prone to artificial by-product formation that prohibits the enrichment of target......-recognizing aptamers. Little is known about the formation of such by-products when employing nucleic acid libraries as templates. We report on the formation of two different forms of by-products, named ladder- and non-ladder-type observed during repetitive amplification in the course of in vitro selection experiments...

  4. THE UPTAKE OF WATER DISINFECTION BY-PRODUCTS INTO FOODS DURING HOME PROCESSING

    Science.gov (United States)

    A variety of organic compounds in tap water are produced as a result of disinfection process. Use of chlorine-containing chemicals for disinfection produces many disinfection by-products (DBPs) including trihalomethanes, haloacetonitriles and haloacetic acid. Ozonation with secon...

  5. SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

  6. SHORTER MENSTRUAL CYCLES ASSOCIATED WITH CHLORINATION BY-PRODUCTS IN DRINKING WATER

    Science.gov (United States)

    Shorter Menstrual Cycles Associated with Chlorination by-Products in Drinking Water. Gayle Windham, Kirsten Waller, Meredith Anderson, Laura Fenster, Pauline Mendola, Shanna Swan. California Department of Health Services.In previous studies of tap water consumption we...

  7. Potato Processing Industry By-products and Their Evaluation in Animal Nutrition

    Directory of Open Access Journals (Sweden)

    Pınar Özdemir

    2017-02-01

    Full Text Available All around the world, particularly in developed countries, fresh potato consumption decreased while the consumption as fast food, snack and convenience food was increased. Potato processing industry has by-products such as cull potato, peel, pulp, and waste water. These by-products can be utilized for production of ethyl alcohol, single cell protein, microbial enzymes, lactic acid, organic fertilizer and bioethanol. The pulp obtained from the processing of potato for starch production can be considered as an energy source with starch content in animal nutrition. Recently, potato peel with the contents of bioactive compounds (chlorogenic, caffeic, gallic, protocatechuic acids and their antioxidant and antimicrobial effects have been intensely focused on. Conversion of by-products of potato processing industry into value-added products is economically important. It was reviewed here by-products of potato processing industry and their evaluation in animal nutrition.

  8. Production development and utilization of Zimmer Station wet FGD by-products. Final report. Volume 6, Field study conducted in fulfillment of Phase 3 titled. Use of FGD by-product gypsum enriched with magnesium hydroxide as a soil amendment

    Energy Technology Data Exchange (ETDEWEB)

    Bigham, J. M. [Ohio State Univ., Wooster, OH (United States). Ohio Agricultural Research Development Center; Soto, U. I. [Ohio State Univ., Wooster, OH (United States). Ohio Agricultural Research Development Center; Stehouwer, R. C. [Ohio State Univ., Wooster, OH (United States). Ohio Agricultural Research Development Center; Yibirin, H. [Ohio State Univ., Wooster, OH (United States). Ohio Agricultural Research Development Center

    1999-04-30

    A variety of flue gas desulfurization (FGD) technologies have been developed to meet environmental restrictions imposed by the federal Clean Air Act and its amendments. These technologies include wet scrubber systems that dramatically reduce sulfur dioxide (SO2) emissions. Although such systems are effective, they also produce large volumes of sludge that must be dewatered, stabilized, and disposed of in landfills. Disposal is an expensive and environmentally questionable process for which suitable alternatives are needed. Wet scrubbing of flue gases with magnesium (Mg)-enhanced lime has the potential to become a leading FGD technology. When combined with aforced oxidation system, the wet sludges resulting from this process can be modified and refined to produce gypsum (CaS04∙2H2O) and magnesium hydroxide [Mg(OH)2] of sufficient purity for beneficial re-use in the construction (wallboard) and pharmaceutical industries. The pilot plant at the CINERGY Zimmer Station near Cincinnati can also produce gypsum by-products formulated to contain varying amounts of Mg(OH)2- Such materials may have value to the agriculture, forestry, and lawn-care industries as soil "conditioners", liming agents, and nutritional supplements capable of supplying calcium (Ca), Mg, and sulfur (S) for plant growth. This report describes three field studies designed to evaluate by-product gypsum and Mg-gypsum from the Zimmer Station power plant as amendments for improving the quality of mine spoils and agricultural soils that were unproductive because of phytotoxic levels of dissolved aluminum (Al) and low pH. The technical literature suggests that gypsum may be more effective than agricultural limestone for ameliorating Al toxicity below the immediate zone of application. Such considerations are important for deep-rooted plant species that attempt to utilize water and nutrients occurring at depth in the spoil/soil.

  9. Canna edulis Ker by-product: chemical composition and characteristics of the dietary fiber.

    Science.gov (United States)

    Juan Zhang; Wang, Zheng-Wu; Shi, Xian-Ming

    2010-08-01

    Canna edulis Ker by-product was recycled and utilized after starch extraction. The chemical composition, physical properties and antioxidant activity of the by-product were investigated. The by-product was mainly composed of dietary fiber (54.84% measured by AOAC method), and the insoluble dietary fiber constituted the major fraction. Then, the chemical composition of dietary fiber was tested using modified AOAC and Englyst methods. The results showed that dietary fiber was comprised of cellulose, hemicelluloses (including xyloglucans, arabinoxylans and glucuronoxylans), pectin and lignin. Moreover, the by-product contained relatively high content of phenolic compounds and exhibited a moderate antioxidant activity. In addition, the by-product showed both high water-holding capacity (12.5 mL/g) and oil-holding capacity (14 mL/g), and its suspension exhibited controllable viscosity. Therefore, the by-product from C. edulis is not only a source of dietary fiber but also a functional ingredient for food industry.

  10. Aqueous chlorination of mefenamic acid: kinetics, transformation by-products and ecotoxicity assessment.

    Science.gov (United States)

    Adira Wan Khalit, Wan Nor; Tay, Kheng Soo

    2016-05-18

    Mefenamic acid (Mfe) is one of the most frequently detected nonsteroidal anti-inflammatory drugs in the environment. This study investigated the kinetics and the transformation by-products of Mfe during aqueous chlorination. The potential ecotoxicity of the transformation by-products was also evaluated. In the kinetic study, the second-order rate constant (kapp) for the reaction between Mfe and free available chlorine (FAC) was determined at 25 ± 0.1 °C. The result indicated that the degradation of Mfe by FAC is highly pH-dependent. When the pH was increased from 6 to 8, it was found that the kapp for the reaction between Mfe and FAC was decreased from 16.44 to 4.4 M(-1) s(-1). Characterization of the transformation by-products formed during the chlorination of Mfe was carried out using liquid chromatography-quadrupole time-of-flight accurate mass spectrometry. Four major transformation by-products were identified. These transformation by-products were mainly formed through hydroxylation, chlorination and oxidation reactions. Ecotoxicity assessment revealed that transformation by-products, particularly monohydroxylated Mfe which is more toxic than Mfe, can be formed during aqueous chlorination.

  11. Potential use of peanut by-products in food processing: a review.

    Science.gov (United States)

    Zhao, Xiaoyan; Chen, Jun; Du, Fangling

    2012-10-01

    Peanut is one of the most important oil and protein producing crops in the world. Yet the amounts of peanut processing by-products containing proteins, fiber and polyphenolics are staggering. With the environmental awareness and scarcity of space for landfilling, wastes/by-product utilization has become an attractive alternative to disposal. Several peanut by-products are produced from crush peanut processes and harvested peanut, including peanut meal, peanut skin, peanut hull and peanut vine. Some of peanut by-products/waste materials could possibility be used in food processing industry, The by-products of peanut contain many functional compounds, such as protein, fiber and polyphenolics, which can be incorporated into processed foods to serve as functional ingredients. This paper briefly describes various peanut by-products produced, as well as current best recovering and recycling use options for these peanut byproducts. Materials, productions, properties, potential applications in food manufacture of emerging materials, as well as environmental impact are also briefly discussed.

  12. Identification and characterization of an imidazolium by-product formed during the synthesis of 4-methylmethcathinone (mephedrone).

    Science.gov (United States)

    Power, John D; Kavanagh, Pierce; McLaughlin, Gavin; O'Brien, John; Talbot, Brian; Barry, Michael; Twamley, Brendan; Dowling, Geraldine; Brandt, Simon D

    2015-10-01

    4-Methylmethcathinone (2-methylamino-1-(4-methylphenyl)propan-1-one, mephedrone) is a psychoactive substance that has been associated with recreational use worldwide. Analytical data related to mephedrone are abundantly available but the characterization of by-products obtained during organic synthesis remains to be explored. This study presents the identification of a 1,2,3,5-tetramethyl-4-(4-methylphenyl)-1H-imidazol-3-ium salt (TMMPI), which was formed during the synthesis of mephedrone. When diethyl ether was added to the crude reaction product, solid material precipitated from the solution. Analytical characterization of TMMPI employed a range of analytical techniques including chromatographic analysis in combination with various mass spectrometric detection methods, nuclear magnetic resonance spectroscopy, and crystal structure analysis. Additional confirmation was obtained from organic synthesis of the imidazolium by-product. When TMMPI was subjected to analysis by gas chromatography-mass spectrometry (GC-MS), isomerization and degradation into two distinct compounds were observed, which pointed towards thermal instability under GC conditions. A liquid chromatography-mass spectrometry (LC-MS) based investigation into a micro-scale synthesis of mephedrone and three additional analogues revealed that the corresponding TMMPI analogue was formed. Interestingly, storage of mephedrone freebase in a number of organic solvents also gave rise to TMMPI and it appeared that its formation during storage was significantly reduced in the absence of air. The present study aimed to support clandestine forensic investigations by employing analytical strategies that are applicable to manufacturing sites. The imidazolium salts will most likely be found amongst the waste products of any clandestine lab site under investigation rather than with the desired product.

  13. Microbiological Evaluation of Pork and Chicken By-Products in South Korea.

    Science.gov (United States)

    Chon, Jung-Whan; Jung, Hae-In; Kuk, Min; Lim, Jong-Soo; Seo, Kun-Ho; Kim, Soo-Ki

    2016-05-01

    In this study, we aimed to evaluate the microbiological risk of pork and chicken by-products by enumerating indicator bacteria (total aerobic bacteria, coliforms, and Escherichia coli) and identifying pathogens such as Campylobacter and Salmonella. The antibiotic resistance of pathogenic isolates was determined, and molecular subtyping was performed using automated repetitive sequence-based PCR (rep-PCR). Pork and chicken by-products were collected from 10 processing plants. The mean numbers of total aerobic bacteria, coliforms, and E. coli from 95 pork by-product samples and 64 chicken by-product samples were 5.1, 3.6, and 2.4 log CFU/g and 4.5, 3.0, and 1.8 log CFU/g, respectively. The numbers of indicator bacteria in the gastrointestinal tract (small intestine, large intestine, and gizzard) were significantly higher than those in other organs. Salmonella and Campylobacter species were detected in 3 and 5 of 95 pork by-product samples and in 6 and 3 of 64 chicken by-product samples, respectively. Four of 9 Salmonella isolates examined were resistant to eight antibiotics, and each of these resistant strains produced an extended-spectrum β-lactamase. Most Campylobacter isolates were resistant to tetracycline (7 of 8 strains) and quinolones (7 of 8 strains). The similarity in rep-PCR patterns among Salmonella isolates was more closely associated with serotype than with the processing plant and type of meat. Conversely, the rep-PCR patterns of Campylobacter isolates were specific to the processing plant. Our findings could help agencies develop regulations for protection from foodborne bacterial infections arising from animal by-products.

  14. Effect of snack food by-product inclusion on production of laying hens.

    Science.gov (United States)

    Van Wyhe, R C; Fraley, S E; Szybisty, C A; Karcher, D M; Karcher, E L

    2012-06-01

    The increased interest in becoming green for consumers and companies is driving groups to develop innovative ways to become more efficient and reduce their waste. Foods past their expiration dates are large sources of waste and are causing food-manufacturing companies to develop waste disposal strategies. Integrating by-products from these companies into animal diets, specifically that of laying hens, could be significantly more cost effective for both the human food manufacturers and the agricultural producers. The study's objective is to evaluate laying hen diets containing snack food by-product, consisting mostly of expired potato chips, and the effect on hen performance. In total, 192 White Leghorn laying hens (45 wk old) were selected from the Michigan State University Poultry Farm. Hens were housed in conventional cages (3 birds/cage) and received 1 of 4 diets for 5 wk: 1) industry control corn-soybean meal, 2) control with 3% by-product, 3) control with 6% by-product, and 4) control with 9% by-product. Diets were formulated to be isocaloric, isonitrogenous, and balanced for sodium. Feed intake was measured for 3 consecutive days each week, and no overall differences between treatments were observed. However, during the first week, feed intake was significantly higher in birds fed the 6% and 9% diets compared with those fed control (P snack food by-products to the diet. In conclusion, the addition of expired snack food by-product into poultry diets does not significantly affect laying hen egg production and has the potential to be used as an alternative feed stuff in the future.

  15. Gas Chromatography

    Science.gov (United States)

    Qian, Michael C.

    Gas chromatography (GC) has many applications in the analysis of food products. GC has been used for the determination of fatty acids, triglycerides, cholesterol, gases, water, alcohols, pesticides, flavor compounds, and many more. While GC has been used for other food components such as sugars, oligosaccharides, amino acids, peptides, and vitamins, these substances are more suited to analysis by high performance liquid chromatography. GC is ideally suited to the analysis of volatile substances that are thermally stable. Substances such as pesticides and flavor compounds that meet these criteria can be isolated from a food and directly injected into the GC. For compounds that are thermally unstable, too low in volatility, or yield poor chromatographic separation due to polarity, a derivatization step must be done before GC analysis. The two parts of the experiment described here include the analysis of alcohols that requires no derivatization step, and the analysis of fatty acids which requires derivatization. The experiments specify the use of capillary columns, but the first experiment includes conditions for a packed column.

  16. Conversion of glycerol to hydrogen rich gas.

    Science.gov (United States)

    Tran, Nguyen H; Kannangara, G S Kamali

    2013-12-21

    Presently there is a glut of glycerol as the by-product of biofuel production and it will grow as production increases. The conundrum is how we can consume this material and convert it into a more useful product. One potential route is to reform glycerol to hydrogen rich gas including synthesis gas (CO + H2) and hydrogen. However, there is recent literature on various reforming techniques which may have a bearing on the efficiency of such a process. Hence in this review reforming of glycerol at room temperature (normally photo-catalytic), catalysis at moderate and high temperature and a non-catalytic pyrolysis process are presented. The high temperature processes allow the generation of synthesis gas with the hydrogen to carbon monoxide ratios being suitable for synthesis of dimethyl ether, methanol and for the Fischer-Tropsch process using established catalysts. Efficient conversion of synthesis gas to hydrogen involves additional catalysts that assist the water gas shift reaction, or involves in situ capture of carbon dioxide and hydrogen. Reforming at reduced temperatures including photo-reforming offers the opportunity of producing synthesis gas or hydrogen using single catalysts. Together, these processes will assist in overcoming the worldwide glut of glycerol, increasing the competitiveness of the biofuel production and reducing our dependency on the fossil based, hydrogen rich gas.

  17. Utilization of Food Processing By-products as Dietary, Functional, and Novel Fiber: A Review.

    Science.gov (United States)

    Sharma, Satish Kumar; Bansal, Sangita; Mangal, Manisha; Dixit, Anil Kumar; Gupta, Ram K; Mangal, A K

    2016-07-26

    Fast growing food processing industry in most countries across the world, generates huge quantity of by-products, including pomace, hull, husk, pods, peel, shells, seeds, stems, stalks, bran, washings, pulp refuse, press cakes, etc., which have less use and create considerable environmental pollution. With growing interest in health promoting functional foods, the demand of natural bioactives has increased and exploration for new sources is on the way. Many of the food processing industrial by-products are rich sources of dietary, functional, and novel fibers. These by-products can be directly (or after certain modifications for isolation or purification of fiber) used for the manufacture of various foods, i.e. bread, buns, cake, pasta, noodles, biscuit, ice creams, yogurts, cheese, beverages, milk shakes, instant breakfasts, ice tea, juices, sports drinks, wine, powdered drink, fermented milk products, meat products and meat analogues, synthetic meat, etc. A comprehensive literature survey has been carried on this topic to give an overview in the field dietary fiber from food by-products. In this article, the developments in the definition of fiber, fiber classification, potential sources of dietary fibers in food processing by-products, their uses, functional properties, caloric content, energy values and the labelling regulations have been discussed.

  18. Cyclic voltammetry to evaluate the antioxidant potential in winemaking by-products.

    Science.gov (United States)

    José Jara-Palacios, M; Luisa Escudero-Gilete, M; Miguel Hernández-Hierro, J; Heredia, Francisco J; Hernanz, Dolores

    2017-04-01

    Grape pomace is composed of seeds, skins and stems that are an important source of phenolic substances, which have antioxidant properties and potential benefits to human health. Cyclic voltammetry (CV) has been used to measure the total antioxidant potential of different winemaking by-products. The electrochemical behavior of pomace, seeds, skins and stems was measured by CV and lipid peroxidation inhibition by thiobarbituric acid reactive substances (TBARS) method. Differences for the electrochemical parameter were found between the by-products, pomace and seeds, which presented the greatest voltammetric peak area. Furthermore, the by-products induced inhibition of lipid peroxidation in rat liver homogenates. Pomace and seeds showed higher capacity to inhibit lipid peroxidation than stems and skins, which could be because these by-products are richer in flavanols. Simple regression analyses showed that voltammetric parameters are highly correlated to the values obtained for lipid peroxidation inhibition. CV is a promising technique to estimate the total antioxidant potential of phenolic extract from winemaking by-products. Copyright © 2016 Elsevier B.V. All rights reserved.

  19. Accelerated Gas Carburizing (URX Gas Carburizing)

    Institute of Scientific and Technical Information of China (English)

    Yoshikazu Shimosato; Mamoru Kamitani; Hiroyuki Nakatsu

    2004-01-01

    URX gas carburizing is an accelerated gas carburizing method with 50% CO + 50% H2 gas which comes from CH4 gas + CO2 gas. By using this gas composition, the carburizing reaction rate increases to the maximum and the controllability of carbon potential improves. A carbon mass flow rate is the product of the carburizing reaction rate multiplied by the difference of carbon percent between carbon potential of the gas and the carbon content of the surface of treated steel parts. We have obtained excellent results from the experimental tests at our laboratory as mentioned bellow. 1)Carburizing time can be shortened by 40% for 0.5 - 0.9 mm effective case depth. 2) Uniform carburizing case depth 3) Less internal oxidation with the same case depth. We have already developed the new roller hearth type continuous carburizing furnace and the new URX gas generator.

  20. Noble gas fractionation during subsurface gas migration

    Science.gov (United States)

    Sathaye, Kiran J.; Larson, Toti E.; Hesse, Marc A.

    2016-09-01

    Environmental monitoring of shale gas production and geological carbon dioxide (CO2) storage requires identification of subsurface gas sources. Noble gases provide a powerful tool to distinguish different sources if the modifications of the gas composition during transport can be accounted for. Despite the recognition of compositional changes due to gas migration in the subsurface, the interpretation of geochemical data relies largely on zero-dimensional mixing and fractionation models. Here we present two-phase flow column experiments that demonstrate these changes. Water containing a dissolved noble gas is displaced by gas comprised of CO2 and argon. We observe a characteristic pattern of initial co-enrichment of noble gases from both phases in banks at the gas front, followed by a depletion of the dissolved noble gas. The enrichment of the co-injected noble gas is due to the dissolution of the more soluble major gas component, while the enrichment of the dissolved noble gas is due to stripping from the groundwater. These processes amount to chromatographic separations that occur during two-phase flow and can be predicted by the theory of gas injection. This theory provides a mechanistic basis for noble gas fractionation during gas migration and improves our ability to identify subsurface gas sources after post-genetic modification. Finally, we show that compositional changes due to two-phase flow can qualitatively explain the spatial compositional trends observed within the Bravo Dome natural CO2 reservoir and some regional compositional trends observed in drinking water wells overlying the Marcellus and Barnett shale regions. In both cases, only the migration of a gas with constant source composition is required, rather than multi-stage mixing and fractionation models previously proposed.

  1. Flue gas treatment with membrane gas absorption

    NARCIS (Netherlands)

    Klaassen, R.; Feron, P.H.M.; Jansen, A.E.

    1998-01-01

    Membrane gas absorption is a new, efficient and flexible way to carry out gas-liquid contacting operations with hollow fibre membranes. Advantages of gas absorption membranes over conventional G-L contactors are: -High specific surface area and rapid mass transfer resulting in very compact and low w

  2. Soluble dietary fiber from Canna edulis Ker by-product and its physicochemical properties.

    Science.gov (United States)

    Zhang, Juan; Wang, Zheng-Wu

    2013-01-30

    Using Canna edulis Ker by-product as raw materials, soluble dietary fiber (SDF) was prepared using six different methods, including chemical, physical-chemical, enzymatic, physical-enzymatic, chemical-enzymatic and physical-chemical-enzymatic methods. As main component in the C. edulis by-product composed of cellulose, glucose converts to other single sugars, which form a series of compounds in the SDF. The treated methods have impact effects on single sugar composition, metal ion content, molecular size distribution, chemical bonds and groups in the structure, thermal property and color of the final product. In view of security, high yield and homogeneity as well as good thermal stability of final product, physical-enzymatic method will be a best choice for the production of SDF from C. edulis by-product. The SDF obtained can be used as dietary supplement and additive in the food industry.

  3. Formation and modeling of disinfection by-products in drinking water of six cities in China.

    Science.gov (United States)

    Ye, Bixiong; Wang, Wuyi; Yang, Linsheng; Wei, Jianrong; E, Xueli

    2011-05-01

    Water quality parameters including TOC, UV(254), pH, chlorine dosage, bromide concentration and disinfection by-products were measured in water samples from 41 water treatment plants of six selected cities in China. Chloroform, bromodichloromethane, dibromochloromethane, dichloroacetic acid and trichloroacetic acid were the major disinfection by-products in the drinking water of China. Bromoform and dibromoacetic acid were also detected in many water samples. Higher concentrations of trihalomethanes and haloacetic acids were measured in summer compared to winter. The geographical variations in DBPs showed that TTHM levels were higher in Zhengzhou and Tianjin than other selected cities. And the HAA5 levels were highest in Changsha and Tianjin. The modeling procedure that predicts disinfection by-products formation was studied and developed using artificial neural networks. The performance of the artificial neural networks model was excellent (r > 0.84).

  4. By-products of fruits processing as a source of phytochemicals

    Directory of Open Access Journals (Sweden)

    Sonja Djilas

    Full Text Available The processing of fruits results in high amounts of waste materials such as peels, seeds, stones, and oilseed meals. A disposal of these materials usually represents a problem that is further aggravated by legal restrictions. Thus new aspects concerning the use of these wastes as by-products for further exploitation on the production of food additives or supplements with high nutritional value have gained increasing interest because these are high-value products and their recovery may be economically attractive. It is well known that by-products represent an important source of sugars, minerals, organic acid, dietary fibre and phenolics which have a wide range of action which includes antitumoral, antiviral, antibacterial, cardioprotective and antimutagenic activities. This review discusses the potential of the most important by-products of apple, grape and citrus fruits processing as a source of valuable compounds. The relevance of this topic is illustrated by a number of references.

  5. Ozonation of metoprolol in aqueous solution: ozonation by-products and mechanisms of degradation.

    Science.gov (United States)

    Tay, Kheng Soo; Rahman, Noorsaadah Abd; Abas, Mhd Radzi Bin

    2013-05-01

    This study investigated the degradation pathway of metoprolol, a widely used β-blocker, in the ozonation via the identification of generated ozonation by-products (OPs). Structure elucidation of OPs was performed using HPLC coupled with quadrupole time-of-flight high-resolution mass spectrometry. Seven OPs were identified, and four of these have not been reported elsewhere. Identified OPs of metoprolol included aromatic ring breakdown by-products; aliphatic chain degraded by-products and aromatic ring mono-, di-, and tetrahydroxylated derivatives. Based on the detected OPs, metoprolol could be degraded through aromatic ring opening reaction via reaction with ozone (O3) and degradation of aliphatic chain and aromatic ring via reaction with hydroxyl radical (•OH).

  6. By-products of Opuntia ficus-indica as a source of antioxidant dietary fiber.

    Science.gov (United States)

    Bensadón, Sara; Hervert-Hernández, Deisy; Sáyago-Ayerdi, Sonia G; Goñi, Isabel

    2010-09-01

    Dietary fiber and bioactive compounds are widely used as functional ingredients in processed foods. The market in this field is competitive and the development of new types of quality ingredients for the food industry is on the rise. Opuntia ficus-indica (cactus pear) produces edible tender stems (cladodes) and fruits with a high nutritional value in terms of minerals, protein, dietary fiber and phytochemicals; however, around 20% of fresh weight of cladodes and 45% of fresh weight of fruits are by-products. The objective of this study was therefore to determine the nutritional value of by-products obtained from cladodes and fruits from two varieties of Opuntia ficus-indica, examining their dietary fiber and natural antioxidant compound contents in order to obtain quality ingredients for functional foods and increase the added value of these by-products.

  7. A gas laser design

    Energy Technology Data Exchange (ETDEWEB)

    Syudzo, Y.; Nooya, Kh.

    1984-05-28

    A gas laser design that excludes direct contact between the gas medium and the atmosphere is proposed. The laser operates at a reduced gas pressure. After shutdown, a special system is used to increase the gas pressure inside the discharge chamber, which approaches atmospheric pressure. The laser employs an internal optical resonator. The electrical discharge which excites the gas medium originates from three electrodes located within the gas discharge tube.

  8. The assessment of sewage sludge gasification by-products toxicity by ecotoxicologial test.

    Science.gov (United States)

    Werle, Sebastian; Dudziak, Mariusz

    2015-08-01

    The process of gasification of sewage sludge generates by-products, which may be contaminated with toxic and hazardous substances, both organic and inorganic. It is therefore important to assess the environmental risk associated with this type of waste. The feasibility of using an ecotoxicological tests for this purpose was determined in the presented study. The applied tests contained indicator organisms belonging to various biological groups (bacteria, crustaceans, plants). The subject of the study were solid (ash, char) and liquid (tar) by-products generated during gasification (in a fixed bed reactor) of dried sewage sludge from various wastewater treatment systems. The tested samples were classified based on their toxic effect. The sensitivity of the indicator organisms to the tested material was determined. In-house procedures for the preparation for toxicity analysis of both sewage sludge and by-products generated during the gasification were presented. The scope of work also included the determination of the effect of selected process parameters (temperature, amount of gasifying agent) on the toxicity of gasification by-products depending on the sewage sludge source. It was shown that both the type of sewage sludge and the parameters of the gasification process affects the toxicity of the by-products of gasification. However, the results of toxicity studies also depend on the type of ecotoxicological test used, which is associated with a different sensitivity of the indicator organisms. Nevertheless, it may be concluded that the by-products formed during the gasification of the low toxicity sewage sludge can be regarded as non-toxic or low toxic. However, the results analysis of the gasification of the toxic sludge were not conclusive, which leads to further research needs in this area. © The Author(s) 2015.

  9. Nutritional Value of Raisin by- Product and its Effect on Late Flower Alfalfa Hay Fermentation Profile and Nutrient Availability in Ruminants

    Directory of Open Access Journals (Sweden)

    Mojtaba Yari

    2016-11-01

    trial was conducted in two runs. Nylon bag residuals from incubation time for each feed block within each run were pooled. In third experiment, gas production kinetics of alfalfa hay, raisin by product and their combination batches as 75:25, 50:50 and 25:75 in dry matter basis were measured at incubation times of 0, 2, 4, 8, 12, 24, 48 and 72 in two runs and with three vials per time of incubation. Orskov and Mcdonal model used to calculate the in situ and gas production parameters. Potential nutrient supply using 24 h cumulative and chemical compositions were measured. Data was analyzed based on completely randomized block design using proc mixed SAS (9.2 which the effect of treatment was as fixed and the effects of block and run were considered as random. The LSD used to compare means differences and level of significant was P≤0.05. Results and discussion Chemical composition results showed that total phenol and tannin and organic matter content in raisin by-product were significantly higher and dry matter, crude protein, neutral detergent fiber, acid detergent fiber and ash were lower than alfalfa hay (P

  10. Optimal pH in chlorinated swimming pools - balancing formation of by-products

    DEFF Research Database (Denmark)

    Hansen, Kamilla Marie Speht; Albrechtsen, Hans-Jørgen; Andersen, Henrik Rasmus

    2013-01-01

    In order to identify the optimal pH range for chlorinated swimming pools the formation of trihalomethanes, haloacetonitriles and trichloramine was investigated in the pH-range 6.5–7.5 in batch experiments. An artificial body fluid analogue was used to simulate bather load as the precursor for by......-products. The chlorine-to-precursor ratio used in the batch experiments influenced the amounts of by-products formed, but regardless of the ratio the same trends in the effect of pH were observed. Trihalomethane formation was reduced by decreasing pH but haloacetonitrile and trichloramine formation increased...

  11. Assessment of by-products of bioenergy systems (anaerobic digestion and gasification) as potential crop nutrient.

    Science.gov (United States)

    Kataki, Sampriti; Hazarika, Samarendra; Baruah, D C

    2017-01-01

    Alternative fertilizer resources have drawn attention in recent times in order to cope up with ever increasing demand for fertilizer. By-products of bioenergy system are considered favourable as organic fertilizer due to their ability to recycle plant nutrients. Present study evaluates fertilizer suitability of by-products of two bioenergy systems viz. 3 types of anaerobic digestion by-products (digestate) from local surplus biomass such as cowdung, Ipomoea carnea:cowdung (60:40) and ricestraw:green gram stover:cowdung (30:30:40) and one gasification by-product (biochar) from rice husk. Digestates were assessed considering 4 different application options of each viz. whole, solid, liquid and ash from solid digestates. Digestate characteristics (organic matter, macronutrients, micronutrients and heavy metal content) were found to be a function of feedstock and processing (solid liquid separation and ashing). Ipomoea carnea based digestates in all application options showed comparatively higher N, P, K, NH4(+)-N, Ca, Mg, S and micro nutrient content than other digestates. Separation concentrated plant nutrients and organic matter in solid digestates, making these suitable both as organic amendments and fertilizer. Separated liquid digestate shared larger fraction of ammonium nitrogen (61-91% of total content), indicating their suitability as readily available N source. However, fertilizer application of liquid digestate may not match crop requirements due to lower total nutrient concentration. Higher electrical conductivity of the liquid digestates (3.4-9.3mScm(-1)) than solid digestates (1.5-2mScm(-1)) may impart phyto-toxic effect upon fertilization due to salinity. In case of by-products with unstable organic fraction i.e. whole and solid digestates of rice straw:green gram stover:cowdung digestates (Humification index 0.7), further processing (stabilization, composting) may be required to maximize their fertilizer benefit. Heavy metal contents of the by-products

  12. Nutritive value and nutrient digestibility of ensiled mango by-products

    OpenAIRE

    Sompong Sruamsiri

    2009-01-01

    Mango canning by-products (seed and peel) together with ensiled mango peel were subjected to analysis of dry matter (DM), ash, crude protein (CP), crude fibre (CF), ether extract (EE), nitrogen-free extract (NFE), gross energy (GE), neutral detergent fibre (NDF) and acid detergent fibre (ADF). In vitro digestibility of DM (IVDMD), ADF (IVADFD) and NDF (IVNDFD) was determined after digesting the by-products in buffered rumen fluid for 24 or 48 h in an incubator. CP content in peel, seed and p...

  13. Reactivity of Ir(III) carbonyl complexes with water: alternative by-product formation pathways in catalytic methanol carbonylation.

    Science.gov (United States)

    Elliott, Paul I P; Haak, Susanne; Meijer, Anthony J H M; Sunley, Glenn J; Haynes, Anthony

    2013-12-21

    The reactions of water with a number of iridium(III) complexes relevant to the mechanism for catalytic methanol carbonylation are reported. The iridium acetyl, [Ir(CO)2I3(COMe)](-), reacts with water under mild conditions to release CO2 and CH4, rather than the expected acetic acid. Isotopic labeling and kinetic experiments are consistent with a mechanism involving nucleophilic attack by water on a terminal CO ligand of [Ir(CO)2I3(COMe)](-) to give an (undetected) hydroxycarbonyl species. Subsequent decarboxylation and elimination of methane gives [Ir(CO)2I2](-). Similar reactions with water are observed for [Ir(CO)2I3Me](-), [Ir(CO)2(NCMe)I2(COMe)] and [Ir(CO)3I2Me] with the neutral complexes exhibiting markedly higher rates. The results demonstrate that CO2 formation during methanol carbonylation is not restricted to the conventional water gas shift mechanism mediated by [Ir(CO)2I4](-) or [Ir(CO)3I3], but can arise directly from key organo-iridium(III) intermediates in the carbonylation cycle. An alternative pathway for methane formation not involving the intermediacy of H2 is also suggested. A mechanism is proposed for the conversion MeOH + CO → CO2 + CH4, which may account for the similar rates of formation of the two gaseous by-products during iridium-catalysed methanol carbonylation.

  14. Using HEM surveys to evaluate disposal of by-product water from CBNG development in the Powder River Basin, Wyoming

    Science.gov (United States)

    Lipinski, B.A.; Sams, J.I.; Smith, B.D.; Harbert, W.

    2008-01-01

    Production of methane from thick, extensive coal beds in the Powder River Basin of Wyoming has created water management issues. Since development began in 1997, more than 650 billion liters of water have been produced from approximately 22,000 wells. Infiltration impoundments are used widely to dispose of by-product water from coal bed natural gas (CBNG) production, but their hydrogeologic effects are poorly understood. Helicopter electromagnetic surveys (HEM) were completed in July 2003 and July 2004 to characterize the hydrogeology of an alluvial aquifer along the Powder River. The aquifer is receiving CBNG produced water discharge from infiltration impoundments. HEM data were subjected to Occam's inversion algorithms to determine the aquifer bulk conductivity, which was then correlated towater salinity using site-specific sampling results. The HEM data provided high-resolution images of salinity levels in the aquifer, a result not attainable using traditional sampling methods. Interpretation of these images reveals clearly the produced water influence on aquifer water quality. Potential shortfalls to this method occur where there is no significant contrast in aquifer salinity and infiltrating produced water salinity and where there might be significant changes in aquifer lithology. Despite these limitations, airborne geophysical methods can provide a broadscale (watershed-scale) tool to evaluate CBNG water disposal, especially in areas where field-based investigations are logistically prohibitive. This research has implications for design and location strategies of future CBNG water surface disposal facilities within the Powder River Basin. ?? 2008 2008 Society of ExplorationGeophysicists. All rights reserved.

  15. Ultrasound-assisted activation of zero-valent magnesium for nitrate denitrification: identification of reaction by-products and pathways.

    Science.gov (United States)

    Ileri, Burcu; Ayyildiz, Onder; Apaydin, Omer

    2015-07-15

    Zero-valent magnesium (Mg(0)) was activated by ultrasound (US) in an aim to promote its potential use in water treatment without pH control. In this context, nitrate reduction was studied at batch conditions using various doses of magnesium powder and ultrasound power. While neither ultrasound nor zero-valent magnesium alone was effective for reducing nitrate in water, their combination removed up to 90% of 50 mg/L NO3-N within 60 min. The rate of nitrate reduction by US/Mg(0) enhanced with increasing ultrasonic power and magnesium dose. Nitrogen gas (N2) and nitrite (NO2(-)) were detected as the major reduction by-products, while magnesium hydroxide Mg(OH)2 and hydroxide ions (OH(-)) were identified as the main oxidation products. The results from SEM-EDS measurements revealed that the surface oxide level decreased significantly when the samples of Mg(0) particles were exposed to ultrasonic treatment. The surface passivation of magnesium particles was successfully minimized by mechanical forces of ultrasound, which in turn paved the way to sustain the catalyst activity toward nitrate reduction.

  16. Potential of chicken by-products as sources of useful biological resources

    Energy Technology Data Exchange (ETDEWEB)

    Lasekan, Adeseye [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Abu Bakar, Fatimah, E-mail: fatim@putra.upm.edu.my [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Hashim, Dzulkifly [Faculty of Food Science and Technology, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia); Halal Products Research Institute, Universiti Putra Malaysia, 43400 UPM Serdang, Selangor (Malaysia)

    2013-03-15

    By-products from different animal sources are currently being utilised for beneficial purposes. Chicken processing plants all over the world generate large amount of solid by-products in form of heads, legs, bones, viscera and feather. These wastes are often processed into livestock feed, fertilizers and pet foods or totally discarded. Inappropriate disposal of these wastes causes environmental pollution, diseases and loss of useful biological resources like protein, enzymes and lipids. Utilisation methods that make use of these biological components for producing value added products rather than the direct use of the actual waste material might be another viable option for dealing with these wastes. This line of thought has consequently led to researches on these wastes as sources of protein hydrolysates, enzymes and polyunsaturated fatty acids. Due to the multi-applications of protein hydrolysates in various branches of science and industry, and the large body of literature reporting the conversion of animal wastes to hydrolysates, a large section of this review was devoted to this subject. Thus, this review reports the known functional and bioactive properties of hydrolysates derived from chicken by-products as well their utilisation as source of peptone in microbiological media. Methods of producing these hydrolysates including their microbiological safety are discussed. Based on the few references available in the literature, the potential of some chicken by-product as sources of proteases and polyunsaturated fatty acids are pointed out along with some other future applications.

  17. Prediction in processing is a by-product of language learning.

    Science.gov (United States)

    Chang, Franklin; Kidd, Evan; Rowland, Caroline F

    2013-08-01

    Both children and adults predict the content of upcoming language, suggesting that prediction is useful for learning as well as processing. We present an alternative model which can explain prediction behaviour as a by-product of language learning. We suggest that a consideration of language acquisition places important constraints on Pickering & Garrod's (P&G's) theory.

  18. Developing environmental legislation to promote recycling of industrial by-products - an endless story?

    Science.gov (United States)

    Sorvari, Jaana

    2008-01-01

    In Finland during the last few decades, mineral industrial residues (by-products) have been used in earthworks, but only to a limited extent relative to their total volume. The most important barrier to efficient recycling of by-products has been the need for a site-specific environmental permit, since the permit process tends to be time-consuming and laborious. In 2000 a working group was set up to prepare national legislation, i.e., a Government decree, in order to promote the use of by-products in earth construction. The aim was to exempt certain residues from the environmental permit obligation. At the first stage, the working group determined specific decision criteria for the selection of the by-products to be included. For the selected residues, the acceptable construction applications and material-specific environmental standards were defined. Various difficulties were encountered during the preparation of the decree. These were mainly caused by the lack of data and by some ongoing changes in environmental regulations. Furthermore, the draft decree received several critical and partly contradictory comments and proposals for amendments. This resulted in considerable delay in implementation.

  19. Fish by-product meal in diets for commercial laying hens

    Directory of Open Access Journals (Sweden)

    André Ferreira Silva

    2017-07-01

    Full Text Available This study aimed to evaluate the increasing levels (0, 1, 2, 3 e 4% of fish by-product meal in diets for laying hens on performance, egg quality and economic analysis. A total of 160 Dekalb White hens with 52-wk old were distributed in a completely randomized design with five treatments and four replicates of eight birds each. The experiment lasted 84 days divided into four periods of 21 days. Estimates of fish by-product meal levels were determined by polynomial regression. Differences (p < 0.05 were detected for all variables of performance, in egg weight, yolk and albumen percentage, yolk and albumen height, feed cost and production cost, in which the inclusion of fish by-product meal in the diets showed better results. It can be concluded that fish by-product meal can be used in diets for hens as alternative feed, with better results in egg production, feed conversion, egg weight, yolk-albumen ratio and a reduction in feed cost and production cost.

  20. Comparison of biochar formation from various agricultural by-products using FTIR spectroscopy

    Science.gov (United States)

    Biochar is charred material produced by the pyrolysis of organic biomass. In this work, Fourier transform infrared (FTIR) spectra of different agricultural by-products feedstock and their derived biochars were collected to explore the potential of FTIR technique as a simple and rapid method for char...

  1. "By-Products": The Added Value of Academic Writing Instruction for Higher Education

    Science.gov (United States)

    Perpignan, Hadara; Rubin, Bella; Katznelson, Helen

    2007-01-01

    We previously defined the "by-products" of academic writing instruction as "affective and social changes perceived by students, "along with" changes in their writing, reflected in interpersonal and intrapersonal behaviors carried over into other spheres of their lives" [Katznelson, Perpignan, & Rubin, 2001. What develops along with the development…

  2. Characterisation of complex xylo-oligosaccharides from xylan rich by-products

    NARCIS (Netherlands)

    Kabel, M.A.

    2002-01-01

    Hydrolysates obtained by hydrothermal treatment of four xylan rich by-products (wheat bran, brewery's spent grain, corn cobs and Eucalyptus wood) were characterised. Depending on the feedstock material studied, the xylan originally present differed in substitution with arabinose, 4- O -methylglucuro

  3. Anaerobic co-digestion of by-products from sugar production with cow manure

    DEFF Research Database (Denmark)

    Fang, Cheng; Boe, Kanokwan; Angelidaki, Irini

    2011-01-01

    Sugar beet leaves (SBL), sugar beet top (SBT), sugar beet pulp (SBP) and desugared molasses (DM) are by-products from the sugar production. In the present study we investigated the potential of SBL, SBT and SBP as feedstock for biogas production. The maximum methane potential of SBL, SBT and SBP...

  4. Neutralization/purification of the wastewaters from printed circuit boards production using waste by-products.

    Science.gov (United States)

    Orescanin, Visnja; Kollar, Robert; Halkijevic, Ivan; Kuspilic, Marin; Flegar, Vanja

    2014-01-01

    The purpose of this work was development of a new method for the neutralization/purification of printed circuit boards wastewater (PCBW) originating from Zagreb, Croatia, using two industrial by-products. PCBW was characterized with low pH value (2.11) and high concentration of TDS (50190 mg L(-1)), copper (4190 mg L(-1)) and iron (2660 mg L(-1)). Waste base (WB), by-product of the alumina production, and waste sludge, by-product of the electrochemical treatment of groundwater, were employed as neutralization/adsorption agents. Due to its high neutralization capacity WB was used for pH adjustment to pH 8 and heavy metals removal from both effluents, yet the final removal of the contaminants down to the regulated values was assessed by adsorption/coagulation with the iron and aluminum rich waste sludge. Following the combined treatment the removal efficiency of iron and copper was higher than 99.99% with their final concentration in the treated water of 0.151 mg L(-1) and 0.129 mg L(-1), respectively. Following the ozone base oxidation the removal efficiency of the organic contaminants was more than 83%. The successful application of the industrial waste by-products for neutralization/purification of the PCBW with the removal efficiencies of the contaminants comparable or better than those obtained with conventional treatment represented the main advantage of our presented method.

  5. Towards the Valorization of Humin By-products: Characterization, Solubilization and Catalysis

    NARCIS (Netherlands)

    Zandvoort, I. van

    2015-01-01

    During the acid-catalyzed dehydration of carbohydrates for the production of renewable bulk chemicals, such as furfural, hydroxymethylfurfural (HMF) and levulinic acid, large amounts of carbonaceous, insoluble by-products are typically formed by cross-polymerization reactions of HMF and several suga

  6. Torrefaction of agricultural by-products: Effects of temperature and time on energy yields

    Science.gov (United States)

    Agricultural by-products, such as apple, grape, olive, and tomato pomaces as well as almond and walnut shells, were torrefied at different temperatures and times. Torrefaction of biomass involves heating in an inert atmosphere to remove volatile components for improved grindability and increased ene...

  7. Photolysis of tembotrione and its main by-products under extreme artificial conditions:

    Energy Technology Data Exchange (ETDEWEB)

    Calvayrac, Christophe; Bontemps, Nataly [Laboratoire de Chimie des Biomolécules et de l' Environnement (LCBE, EA 4215), Université de Perpignan Via Domitia (UPVD), 52 avenue Paul Alduy, 66860 Perpignan (France); Nouga-Bissoue, Achille [Ecole Nationale Supérieure de l' Enseignement Technique (ENSET), Université de Douala, BP 2701 Douala (Cameroon); Romdhane, Sana; Coste, Camille-Michel [Laboratoire de Chimie des Biomolécules et de l' Environnement (LCBE, EA 4215), Université de Perpignan Via Domitia (UPVD), 52 avenue Paul Alduy, 66860 Perpignan (France); Cooper, Jean-Francois, E-mail: cooper@univ-perp.fr [Laboratoire de Chimie des Biomolécules et de l' Environnement (LCBE, EA 4215), Université de Perpignan Via Domitia (UPVD), 52 avenue Paul Alduy, 66860 Perpignan (France)

    2013-05-01

    The photolytic behaviour of tembotrione, a new chemical herbicide intended for foliar application in corn, was investigated under unnatural and extreme photochemical exposure in aqueous solutions in the laboratory. It appeared that degradation was dependent on pH and occurred more rapidly under acidic and neutral conditions, leading predominantly to the formation of a xanthenedione type compound by intramolecular cyclisation with loss of HCl. Trace amounts of benzoic acid by-products appeared also during UV-C irradiation (λ = 254 nm) of the parent compound. Results were comparable to those obtained with sulcotrione, another β-triketone herbicide. These extreme irradiation conditions clearly accelerated the phototransformation of sulcotrione vs. simulated sunlight irradiation. Furthermore, the photolysis of the degradation by-products, resulting from either photolysis, hydrolysis or biotic pathways of the two active ingredients, was also carried out. The benzoic acid by-products appeared more stable to photolysis than their parent molecules. Xanthenedione derivatives were degraded more rapidly with several differences depending on the pH value. - Highlights: • Tembotrione and sulcotrione water photolysis appeared enhanced under unnatural and extreme conditions. • Triketones were easily photodegraded under acidic and neutral conditions. • Xanthenedione derivatives were the predominant by-products. • Phototransformation of xanthenedione derivatives was pH-dependent. • Benzoic acid derivatives can be relatively stable.

  8. ANIMAL MODELS FOR STUDYING MISCARRIAGE: ILLUSTRATION WITH STUDY OF DRINKING WATER DISINFECTION BY-PRODUCTS

    Science.gov (United States)

    Animal models for studying miscarriage: Illustration with study of drinking water disinfection by-productsAuthors & affiliations:Narotsky1, M.G. and S. Bielmeier Laffan2.1Reproductive Toxicology Division, NHEERL, ORD, U.S. Environmental Protection Agency, Research Tri...

  9. Hydrothermally treated xylan rich by-products yield different classes of xylo-oligosaccharides

    NARCIS (Netherlands)

    Kabel, M.A.; Carvalheiro, F.; Garrote, G.; Avgerinos, E.; Koukios, E.; Parajo, J.C.; Girio, M.

    2002-01-01

    Four xylan rich by-products, namely wheat bran, brewery's spent grain, corn cobs and Eucalyptus wood, were characterised and subjected to a mild hydrothermal treatment in order to release and degrade the xylan from the starting materials. The chemical characterisation of the feedstock materials, wit

  10. Innovations in value-addition of edible meat by-products.

    Science.gov (United States)

    Toldrá, Fidel; Aristoy, M-Concepción; Mora, Leticia; Reig, Milagro

    2012-11-01

    While muscle foods are the more commonly consumed portion of an animal, meat by-products such as the entrails and internal organs are also widely consumed. Considered high-priced delicacies or waste material to be tossed away, the use and value of offal-edible and inedible meat by-products depend entirely on the culture and country in question. The skin, blood, bones, meat trimmings, fatty tissues, horns, hoofs, feet, skull, and internal organs of harvested animals comprise a wide variety of products including human or pet food or processed materials in animal feed, fertilizer, or fuel. Industry is using science and innovation to add value to animal by-products far beyond its usual profitability. Regardless of the final product's destination, it is still necessary to employ the most up-to-date and effective tools to analyze these products for nutritional properties, to search for key active molecules in nutrition like bioactive peptides, food safety (antimicrobial peptides), medicine, cosmetics or other fields, to develop new technological applications and to continue innovation towards advanced value-addition of meat by-products.

  11. "By-Products": The Added Value of Academic Writing Instruction for Higher Education

    Science.gov (United States)

    Perpignan, Hadara; Rubin, Bella; Katznelson, Helen

    2007-01-01

    We previously defined the "by-products" of academic writing instruction as "affective and social changes perceived by students, "along with" changes in their writing, reflected in interpersonal and intrapersonal behaviors carried over into other spheres of their lives" [Katznelson, Perpignan, & Rubin, 2001. What…

  12. CHLORINATION BY-PRODUCTS IN DRINKING WATER AND MENSTRUAL CYCLE FUNCTION

    Science.gov (United States)

    Chlorination by-Products in Drinking Water and Menstrual Cycle FunctionGayle C. Windham1, Kirsten Waller2, Meredith Anderson2, Laura Fenster1, Pauline Mendola3, Shanna Swan41California Department of Health Services, Division of Environmental and Occupational Disea...

  13. CHLORINATION BY-PRODUCTS IN DRINKING WATER AND MENSTRUAL CYCLE FUNCTION

    Science.gov (United States)

    Chlorination by-Products in Drinking Water and Menstrual Cycle FunctionGayle C. Windham1, Kirsten Waller2, Meredith Anderson2, Laura Fenster1, Pauline Mendola3, Shanna Swan41California Department of Health Services, Division of Environmental and Occupational Disea...

  14. Productive performance lambs on grazing supplemented with concentrates containing fruit processing by-products

    Directory of Open Access Journals (Sweden)

    Daniel Bonfim Manera

    2014-02-01

    Full Text Available The objective of this study was to evaluate the productive performance of sheep kept in irrigated Tifton 85 pastures receiving concentrate supplementation containing different fruits processing by-products. The pasture area corresponded to 0.58 ha, divided in 24 paddocks, under rotational grazing with 20 days of interval of grazing and four days of grazing. 24 male sheep, castrated with 26.9±2.4 of initial body weight and ten months like testers animals, were used. Three fruit processing by-products (guava, barbados cherry and grape wine industry including in 30% of dry matter basis in supplements, besides the treatment “control” containing traditional ingredients (dry ground corn, soybean meal and wheat bran, were compared. The experimental design was a completely randomized with six replicates by treatments. The concentrates evaluated containing fruit processing by-products did not affect the daily weight gain, the total weight gain and the final body weight of sheep kept in irrigated pastures. The stoking rate of pastures, an average was 90.96 lambs/ha and estimative of meat production by area of 2,756.50 kg/ha/year. Thus, guava, barbados cherry and grape wine industry by-products may substitute 30% of dry matter the traditional ingredients in concentrate without harming the productive performance of animals and area.

  15. Effects of an onion by-product on bioactivity and safety markers in healthy rats

    DEFF Research Database (Denmark)

    Roldan-Marin, Eduvigis; Krath, Britta; Poulsen, Morten

    2009-01-01

    environment in healthy rats. Rats were fed during 4 weeks with a diet containing the products or a control feed balanced in carbohydrate. The onion by-product and the extract caused anaemia as expected in rodents for Allium products. No other toxicity was observed, including genotoxicity. Glutathione...

  16. DISINFECTION BY-PRODUCT FORMATION AND CONTROL BY OZONATION AND BIOTREATMENT

    Science.gov (United States)

    There is increasing interest in using ozone in water treatment because it is a strong disinfectant and is able to oxidize the precursors of some disinfection by-products (DBPs). However, ozonation itself produces DBPs, like aldehydes and ketones, and increases the concentration ...

  17. Utilization of agricultural by-products in healthful food products: Organogelators, antioxidants, and spreadable products

    Science.gov (United States)

    It was found that several agricultural by-products could be utilized for healthful food products. Three major applications that our research group has been focusing on will be discussed: 1) plant waxes for trans-fat free, low saturated fat-containing margarine and spread products, 2) extracts of cor...

  18. By-product mutualism and the ambiguous effects of harsher environments - A game-theoretic model

    NARCIS (Netherlands)

    De Jaegher, Kris; Hoyer, Britta

    2016-01-01

    We construct two-player two-strategy game-theoretic models of by-product mutualism, where our focus lies on the way in which the probability of cooperation among players is affected by the degree of adversity facing the players. In our first model, cooperation consists of the production of a public

  19. The influence of shale gas on steamcracking

    Energy Technology Data Exchange (ETDEWEB)

    Rupieper, A. [Linde Engineering Dresden GmbH, Dresden (Germany)

    2013-11-01

    US shale gas reserves with more than 860 TCF (Source: U.S. Energy Information Administration study World Shale Gas Resources) account for 2 of the global largest reserves after China. In 7 areas of the US, these reserves are systematically explored, providing a significant amount of cheap natural gas source for decades. The ethane share, carried by such shale gas, can reach up to 16%. Ethane has been already in the past 2 most important feedstock for Steamcrackers, being the backbone of the Petrochemical Industry. Due to availability of vast shale gas, the US steamcracker industry is facing a shift from naphtha to shale gas ethane, as the margin of Ethylene produced from shale gas ethane is significantly larger than that of naphtha based Ethylene (app. + 630 USD/t Ethylene). As a consequence shale gas is ''the magic bullet'' incinerating investments into Steamcrackers and downstream plants for U.S petrochemical industry. Steamcracker Projects with an additional ethylene production capacity of more than 17 million tons/a by 2020 are announced or already under construction. Investments into downstream plants refining the C2 derivatives will follow or are already in planning/engineering phase. But the US market cannot absorb all related products, causing a significant export exposure, which will influence global trade flows for C2 derivatives and affect prices. This article presents the impact of shale gas ethane cracking on: - Trade flow of C2 derivatives; - By-product deficits; - Alternate C3+ derivative production routes; - Challenges related to engineering requirements and project execution for Steamcracker projects. (orig.)

  20. Characterization of Animal By-Product Hydrolysates to Be Used as Healthy and Bioactive Ingredients in Food

    DEFF Research Database (Denmark)

    Damgaard, Trine Desiree

    The world meat production and consumption has increased rapidly over the last couple of decades, due to population and income growth. In contrast to the meat, the consumption of animal by-products has been declining, leaving large amounts of by-products underutilized. As many by-products are highly...

  1. Potential contamination issues arising from the use of biofuel and food industry by-products in animal feed

    DEFF Research Database (Denmark)

    Granby, Kit; Mortensen, Alicja; Broesboel-Jensen, B.

    2012-01-01

    By-products are secondary or discarded products from manufacturing. Contamination of by-products used for feed may result in carryover to animal food products and hence have impact on either animal health or food safety. Feed by-products from bioethanol production include, for example, 'dried dis...

  2. Effects of an onion by-product on bioactivity and safety markers in healthy rats.

    Science.gov (United States)

    Roldán-Marín, Eduvigis; Krath, Britta N; Poulsen, Morten; Binderup, Mona-Lise; Nielsen, Tom H; Hansen, Max; Barri, Thaer; Langkilde, Søren; Cano, M Pilar; Sánchez-Moreno, Concepción; Dragsted, Lars O

    2009-12-01

    Onions are excellent sources of bioactive compounds including fructo-oligosaccharides (FOS) and polyphenols. An onion by-product was characterised in order to be developed as a potentially bioactive food ingredient. Our main aim was to investigate whether the potential health and safety effects of this onion by-product were shared by either of two derived fractions, an extract containing the onion FOS and polyphenols and a residue fraction containing mainly cell wall materials. We report here on the effects of feeding these products on markers of potential toxicity, protective enzymes and gut environment in healthy rats. Rats were fed during 4 weeks with a diet containing the products or a control feed balanced in carbohydrate. The onion by-product and the extract caused anaemia as expected in rodents for Allium products. No other toxicity was observed, including genotoxicity. Glutathione reductase (GR) and glutathione peroxidase (GPx1) activities in erythrocytes increased when rats were fed with the onion extract. Hepatic gene expression of Gr, Gpx1, catalase, 5-aminolevulinate synthase and NAD(P)H:quinone oxidoreductase was not altered in any group of the onion fed rats. By contrast, gamma-glutamate cysteine ligase catalytic subunit gene expression was upregulated but only in rats given the onion residue. The onion by-products as well as the soluble and insoluble fractions had prebiotic effects as evidenced by decreased pH, increased butyrate production and altered gut microbiota enzyme activities. In conclusion, the onion by-products have no in vivo genotoxicity, may support in vivo antioxidative defence and alter the functionality of the rat gut microbiota.

  3. Compressed gas manifold

    Science.gov (United States)

    Hildebrand, Richard J.; Wozniak, John J.

    2001-01-01

    A compressed gas storage cell interconnecting manifold including a thermally activated pressure relief device, a manual safety shut-off valve, and a port for connecting the compressed gas storage cells to a motor vehicle power source and to a refueling adapter. The manifold is mechanically and pneumatically connected to a compressed gas storage cell by a bolt including a gas passage therein.

  4. Mitigation strategies in the agro-food sector: The anaerobic digestion of tomato purée by-products. An Italian case study

    Energy Technology Data Exchange (ETDEWEB)

    Bacenetti, Jacopo, E-mail: jacopo.bacenetti@unimi.it [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, Università degli Studi di Milano, Via G. Celoria 2, 20133 Milan (Italy); Duca, Daniele [Department of Agricultural, Food and Environmental Sciences, Università Politecnica delle Marche, Via Brecce Bianche 10, 60131 Ancona (Italy); Negri, Marco [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, Università degli Studi di Milano, Via G. Celoria 2, 20133 Milan (Italy); Fusi, Alessandra [School of Chemical Engineering and Analytical Science, The Mill, Sackville Street, The University of Manchester, Manchester M13 9PL (United Kingdom); Fiala, Marco [Department of Agricultural and Environmental Sciences, Production, Landscape, Agroenergy, Università degli Studi di Milano, Via G. Celoria 2, 20133 Milan (Italy)

    2015-09-01

    Tomato processing involves a significant production of residues, mainly constituted by discarded tomatoes, skins, seeds and pulp. Often, these residues are not valorized and represent an added cost for manufacturing companies because of disposal processes, with environmental issues due to the difficult management. The exploitation of these residual materials results complex as their availability is mainly concentrated in few months. A possible solution is the production of biogas employed in a Combine Heat and Power engine for energy production, in line with the 2020 targets of European Union in terms of promotion of energy from renewable resources and greenhouse gas emission reduction. The tomato by-product utilization for energy production as a strategy to reduce the environmental load of tomato purée was evaluated by means of Life Cycle Assessment. Two scenarios were considered: Baseline Scenario — tomato by-products are sent back to the tomato fields as organic fertilizers; Alternative Scenario — tomato by-products are employed in a nearby biogas plant for energy production. Methane production of tomato by-products was assessed by means of specific laboratory tests. The comparison between the two scenarios highlighted reductions for all the impact categories with the Alternative Scenario. The most important reductions are related to particulate matter (− 5.3%), climate change (− 6.4%) and ozone depletion (− 13.4%). Although small, the reduction of the environmental impact cannot be neglected; for example for climate change, the anaerobic digestion of by-products allows a saving of GHG emissions that, over the whole year, is equal to 1.567 tons of CO{sub 2} eq. The results of this study could be up-scaled to the food industries with high heat demand producing considerable amounts of fermentable by-products employable as feedstock for biogas production. - Highlights: • Tomato processing generates byproducts, whose residual mass is 2–5%.

  5. STONES SAWING SLUDGE AS BY-PRODUCT: characterization for a future recovery

    Science.gov (United States)

    Zichella, Lorena; Bellopede, Rossana; Marini, Paola

    2017-04-01

    The European Commission, as part of its Thematic Strategy on the prevention and recycling of waste, committed itself to tackle one of the issues around the waste definition, namely the distinction between waste and by-products. This definition has been outlined through the Communication on waste and by-product of the European Court of Justice (Brussels, 21.2.2007 COM(2007) 59 final COMMUNICATION FROM THE COMMISSION TO THE COUNCIL AND THE EUROPEAN PARLIAMENT). By-product is a substance or object, resulting from a production process, the primary aim of which is not the production of that item. By-products can come from a wide range of business sectors, and can have very different environmental impacts. If there is a possibility that the material is in fact not useable, because it does not meet the technical specifications that would be required for its use, then it should continue to be considered as a waste. The status of waste protects the environment from the potential consequences of this uncertainty. If it subsequently happens that a use is found for the waste in question then it will lose its status of waste and it will be considered a by-product. An incorrect classification could be the cause of environmental damage or unnecessary costs for business. For this purpose a characterization of sludge coming from different plants of stone processing was carried out for a better classification of the materials in view of a future recovery. The different stones cutting processes considered for this study are: gangsaw, diamond blade and diamond wire. The cut materials are granites, gneisses, and other stones mainly of silicatic nature. The tests performed on the sawing sludge are the following: particle size analysis, chemical analysis, wet magnetic separation, diffraction and SEM analysis. The study performed is useful for evaluating the possible reuses of the products coming from the magnetic separation: the metal fraction, and the mineral one. In order to avoid a

  6. AMMONIA REMOVAL AND NITROUS OXIDE PRODUCTION IN GAS-PHASE COMPOST BIOFILTERS

    Science.gov (United States)

    Biofiltration technology is widely utilized for treating ammonia gas (NH3), with one of its potential detrimental by-products being nitrous oxide (N2O), a greenhouse gas approximately 300 times more reactive to infrared than CO2. The present work intends to provide the relation between NH3 removal d...

  7. Gas chromatographic-mass spectrometric analysis of tar compounds formed during pyrolysis of rice husks

    NARCIS (Netherlands)

    Haanappel, V.A.C.; Stevens, T.W.; Hovestad, A.; Skolnik, V.; Visser, R.

    1991-01-01

    Pyrolysis of agricultural waste to produce fuel gas involves formation of tars as noxious by-products. In this paper the qualitative analysis of tars formed during pyrolysis of rice husks is presented, based on identification by gas chromatography—mass spectrometry and interpolation of retention tim

  8. Production development and utilization of Zimmer Station wet FGD by-products. Final report. Volume 1, Executive summary

    Energy Technology Data Exchange (ETDEWEB)

    Smith, Kevin [Dravo Technology Center, Pittsburgh, PA (United States); Beeghly, Joel H. [Dravo Technology Center, Pittsburgh, PA (United States)

    2000-11-30

    About 30 electric utility units with a combined total of 15,000 MW utilize magnesium enhanced lime flue gas desulfurization (FGD) systems. A disadvantage of this and other inhibited or natural oxidation wet FGD systems is the capital and operating cost associated with landfill disposal of the calcium sulfite based solids. Fixation to stabilize the solids for compaction in a landfill also consumes fly ash that otherwise may be marketable. This Executive Summary describes efforts to dewater the magnesium hydroxide and gypsum slurries and then process the solids into a more user friendly and higher value form. To eliminate the cost of solids disposal in its first generation Thiosorbic® system, the Dravo Lime Company developed the ThioClear® process that utilizes a magnesium based absorber liquor to remove S02 with minimal suspended solids. Magnesium enhanced lime is added to an oxidized bleed stream of thickener overflow (TOF) to produce magnesium hydroxide [Mg(OH)2] and gypsum (CaS04 • 2H20), as by-products. This process was demonstrated at the 3 to 5 MW closed loop FGD system pilot plant at the Miami Fort Station of Cinergy, near Cincinnati, Ohio with the help of OCDO Grant Agreement CDO/D-91-6. A similar process strictly for'recovery and reuse of Mg(OH)2 began operation at the Zimmer Station of Cinergy in late 1994 that can produce 900 pounds of Mg(OH)2 per hour and 2,600 pounds of gypsum per hour. This by-product plant, called the Zimmer Slipstream Magnesium Hydroxide Recovery Project Demonstration, was conducted with the help of OCDO Grant Agreement CDO/D-921-004. Full scale ThioClear® plants began operating in 1997 at the 130 MW Applied Energy Services plant, in Monaca, PA, and in year 2000 at the 1,330 MW Allegheny Energy Pleasants Station at St. Marys, WV.

  9. Stillage reflux in food waste ethanol fermentation and its by-product accumulation.

    Science.gov (United States)

    Ma, Hongzhi; Yang, Jian; Jia, Yan; Wang, Qunhui; Tashiro, Yukihiro; Sonomoto, Kenji

    2016-06-01

    Raw materials and pollution control are key issues for the ethanol fermentation industry. To address these concerns, food waste was selected as fermentation substrate, and stillage reflux was carried out in this study. Reflux was used seven times during fermentation. Corresponding ethanol and reducing sugar were detected. Accumulation of by-products, such as organic acid, sodium chloride, and glycerol, was investigated. Lactic acid was observed to accumulate up to 120g/L, and sodium chloride reached 0.14mol/L. Other by-products did not accumulate. The first five cycles of reflux increased ethanol concentration, which prolonged fermentation time. Further increases in reflux time negatively influenced ethanol fermentation. Single-factor analysis with lactic acid and sodium chloride demonstrated that both factors affected ethanol fermentation, but lactic acid induced more effects.

  10. Drinking Water Disinfection by In-line Electrolysis: Product and Inorganic By-Product Formation

    Science.gov (United States)

    Bergmann, M. E. Henry

    This section covers peculiarities of so-called in-line electrolysis when drinking water is electrolysed to produce disinfection species killing microorganisms. Mainly mixed oxide electrodes (MIO) based on IrO2 and/or RuO2 coatings and boron-doped diamond electrodes were used in the studies. Artificial and real drinking water systems were electrolysed in continuous and discontinuous operating mode, varying water composition, current density and electrode materials. Results show, besides the ability of producing active chlorine, risks of inorganic disinfection by-products (DBPs) such as chlorate, perchlorate, nitrite, ammonium, chloramines, hydrogen peroxide and others. DBPs are responsible for analysis errors using DPD method for active chlorine measurements. Geometry may influence by-product yield. As a conclusion, the necessity of developing test routines for practical cell applications must be underlined.

  11. Phenolic compounds recovered from agro-food by-products using membrane technologies: An overview.

    Science.gov (United States)

    Castro-Muñoz, Roberto; Yáñez-Fernández, Jorge; Fíla, Vlastimil

    2016-12-15

    Typically, the various agro-food by-products of the food industry are treated by standard membrane processes, such as microfiltration, ultrafiltration and nanofiltration, in order to prepare them for final disposal. Recently, however, new membrane technologies have been developed. The recovery, separation and fractionation of high-added-value compounds, such as phenolic compounds from food processing waste, are major current research challenges. The goal of this paper is to provide a critical review of the main agro-food by-products treated by membrane technologies for the recovery of nutraceuticals. State-of-the-art of developments in the field are described. Particular attention is paid to experimental results reported for the recovery of polyphenols and their derivatives of different molecular weight. The literature data are analyzed and discussed in relation to separation processes, molecule properties, membrane characteristics and other interesting phenomena that occur during their recovery. Copyright © 2016 Elsevier Ltd. All rights reserved.

  12. Utilization of oleo-chemical industry by-products for biosurfactant production.

    Science.gov (United States)

    Bhardwaj, Garima; Cameotra, Swaranjit Singh; Chopra, Harish Kumar

    2013-11-21

    Biosurfactants are the surface active compounds produced by micro-organisms. The eco-friendly and biodegradable nature of biosurfactants makes their usage more advantageous over chemical surfactants. Biosurfactants encompass the properties of dropping surface tension, stabilizing emulsions, promoting foaming and are usually non- toxic and biodegradable. Biosurfactants offer advantages over their synthetic counterparts in many applications ranging from environmental, food, and biomedical, cosmetic and pharmaceutical industries. The important environmental applications of biosurfactants include bioremediation and dispersion of oil spills, enhanced oil recovery and transfer of crude oil. The emphasis of present review shall be with reference to the commercial production, current developments and future perspectives of a variety of approaches of biosurfactant production from the micro-organisms isolated from various oil- contaminated sites and from the by-products of oleo-chemical industry wastes/ by-products viz. used edible oil, industrial residues, acid oil, deodorizer distillate, soap-stock etc.

  13. Castanea sativa by-products: a review on added value and sustainable application.

    Science.gov (United States)

    Braga, Nair; Rodrigues, Francisca; Oliveira, M Beatriz P P

    2015-01-01

    Castanea sativa Mill. is a species of the family Fagaceae abundant in south Europe and Asia. The fruits (chestnut) are an added value resource in producing countries. Chestnut economic value is increasing not only for nutritional qualities but also for the beneficial health effects related with its consumption. During chestnut processing, a large amount of waste material is generated namely inner shell, outer shell and leaves. Studies on chestnut by-products revealed a good profile of bioactive compounds with antioxidant, anticarcinogenic and cardioprotective properties. These agro-industrial wastes, after valorisation, can be used by other industries, such as pharmaceutical, food or cosmetics, generating more profits, reducing pollution costs and improving social, economic and environmental sustainability. The purpose of this review is to provide knowledge about the type of chestnut by-products produced, the studies concerning its chemical composition and biological activity, and also to discuss other possible applications of these materials.

  14. M dwarf stars-the by-product of X-ray selected AGN candidates

    Institute of Scientific and Technical Information of China (English)

    Yu Bai; Yan-Chun Sun; Xiang-Tao He; Yang Chen; Jiang-Hua Wu; Qing-Kang Li; Richard F.Green; Wolfgang Voges

    2012-01-01

    X-ray loud M dwarfs are a major source of by-products (contamination)in the X-ray band of the multiwavelength quasar survey.As a by-product,the low dispersion spectra of 22 M dwarfs are obtained in which the spectra of 16 sources are taken for the first time.The spectral types and distances of the sample arc given based on spectral indices CaH2,CaH3,and TiOS.The parameter (ι)TiO/CaH is calculated to separate the different metallicity classes among dwarfs,subdwarfs and extreme subdwarfs.We also discuss the distributions in the diagrams of log( Lx/ Lbol),the ratio between X-ray and bolometric luminosity versus spectral type and infrared colors.

  15. Trigonometric approximation of the conjugate series of a function of generalized Lipchitz class by product summability

    Science.gov (United States)

    Sahu, Subrata K.; Acharya, D.; Nayak, P. C.; Misra, U. K.

    2016-06-01

    Trigonometric Fourier approximation and Lipchitz class of function had been introduced by Zygmund and McFadden respectively. Dealing with degree of approximation of conjugate series of a Fourier series of a function of Lipchitz class Misra et al. have established certain theorems. Extending their results, in this paper a theorem on trigonometric approximation of conjugate series of Fourier series of a function f ∈ W(Lp, ξ(t)) by product summability (E, s)(N, pn, qn) has been established.

  16. PERFORMANCE OF NILE TILAPIA (OREOCHROMIS NILOTICUS FED FISH MEAL AND POULTRY BY-PRODUCT

    Directory of Open Access Journals (Sweden)

    H.M. ADAM SULIEMAN

    2011-11-01

    Full Text Available This study was conducted at the Department of Fisheries and Wild life Science, College of Science and Technology of Animal Production, Sudan University of Science and Technology, to determine the feed efficiency of two locally formulated diets (A and B on performance of Nile Tilapia (Oreochromis niloticus. Two iso-caloric iso-nitrogenus diets were formulated by adding 60% wheat bran, 30% cotton seed cake and 10% poultry by-product (offal+intestine, while the diet (B contained 60% wheat bran, 30% cotton seed cake and 10% fish meal. The fish were fed twice a day at affixed feeding rate of 5% body weight of fish per day for 90 days. The total body weight, total length and standard length were measured every 10 days throughout the experimental period. The growth response and performance data of the studied fish (Oreochromis niloticus fed with diet (B containing fishmeal recorded a better growth response than that fish fed poultry by- product meal (diet A. The final weight increment, specific growth rate (SGR, feed conversion ratio (FCR and protein efficiency ratio (PER over the experimental period showed lowest value for the group fed the diet with poultry by-product (Diet A compared to those fed with the fishmeal (Diet B. Except the apparent protein utilization (APU was recorded higher for those fed with Diet A (23.31 than Diet B (11.99. The groups fed diet (A attained SGR 0.24, FCR 1.9, PER 0.75, APU 23.31, while it recorded in group (B, SGR 0.34, FCR 1.2, PER 1.06, APU 11.99. Therefore, fish meal is better as compared to poultry by-products for Nile Tilapia (Oreochromis niloticus nutrition.

  17. Optimization of the liquid biofertilizer production in batch fermentation with by-product from MSG

    Science.gov (United States)

    Namfon, Panjanapongchai; Ratchanok, Sahaworarak; Chalida, Daengbussade

    2017-03-01

    The long term use of chemical fertilizers destroyed the friability of soil which obviously decreased quantity and quality of crops and especially affect microorganisms living in soils. The bio-fertilizer with microbial consortium is an environmental friendly alternative to solve this bottleneck due to harboring soil microorganisms such as Bacillus sp., Micrococcus sp., Pseudomonas sp., Staphylococcus sp. and Deinococcus sp. produced with natural by-product or waste from industries that is alternative and sustainable such as nutrient-rich (by-product) from Mono Sodium Glutamate (MSG) for producing liquid biofertilizer by batch fermentation. In this work, the concentration of reducing sugar from substrate as main carbon source was evaluated in shake flask with mixed cultures. The optimal conditions were studied comparing with two levels of reducing sugar concentration (10, 20 g/L) and inoculums concentration (10, 20 %v/v) with using (2×2) full factorial design. The results indicated that the by-product from monosodium glutamate is feasible for fermentation and inoculums concentration is mainly influenced the batch fermentation process. Moreover, the combined 20 g/L and 10%v/v were considerably concluded as an optimal condition, of which the concentration of vegetative cells and spores attained at 8.29×109 CFU/mL and 1.97×105 CFU/mL, respectively. Their spores cell yields from reducing sugar (Yx/s) were obtained at 1.22×106 and 3.34×105 CFU/g were markedly different. In conclusion, the liquid Biofertilizer was produced satisfactorily at 20 g/L reducing sugar and 10% v/v inoculums in shake flask culture. Moreover, these results suggested that the by-product from monosodium glutamate is feasible for low-cost substrate in economical scale and environmental-friendly.

  18. Disinfection by-products in ballast water treatment: an evaluation of regulatory data.

    Science.gov (United States)

    Werschkun, Barbara; Sommer, Yasmin; Banerji, Sangeeta

    2012-10-15

    To reduce the global spread of invasive aquatic species, international regulations will soon require reductions of the number of organisms in ballast water discharged by ships. For this purpose, ballast water treatment systems were developed and approved by an international procedure. These systems rely on established water treatment principles which, to different degrees, have been proven to generate disinfection by-products with hazardous properties but have only scarcely been investigated in marine environments. Our study evaluates the publicly available documentation about approved ballast water treatment systems with regard to by-product formation. The most commonly employed methods are chlorination, ozonation, and ultraviolet (UV) irradiation. Chlorination systems generate trihalomethanes, halogenated acetic acids, and bromate in substantially larger quantities than reported for other areas of application. Levels are highest in brackish water, and brominated species predominate, in particular bromoform and dibromoacetic acid. Ozonation, which is less frequently utilized, produces bromoform in lower concentrations but forms higher levels of bromate, both of which were effectively reduced by active carbon treatment. In systems based on UV radiation, medium pressure lamps are employed as well as UV-induced advanced oxidation. For all UV systems, by-product formation is reported only occasionally. The most notable observations were small increases in nitrite, hydrogen peroxide, halogenated methanes and acetic acids. The assessment of by-product formation during ballast water treatment is limited by the lacking completeness and quality of available information. This concerns the extent and statistical characterisation of chemical analysis as well as the documentation of the test water parameters.

  19. Quality Parameters Of Wheat Bread Enriched With Pumpkin (Cucurbita Moschata) By-Products

    OpenAIRE

    Kampuse Solvita; Ozola Liene; Straumite Evita; Galoburda Ruta

    2015-01-01

    Pumpkin processing into puree, juice, candied fruit and pumpkin seed oil results in large amount of by-products. Pumpkins are rich in carotenes, vitamins, minerals, pectin and dietary fibre. The aim of the current study was to evaluate effect of pumpkin pomace and pumpkin residue powder on wheat bread quality. The total content of carotenes was analyzed by spectrophotometric method. The initial increase of pumpkin residue addition indicated increase in loaf volume, which started to decrease a...

  20. Digital by-product data in web 2.0 exploring mass collaboration of Wikipedia

    CERN Document Server

    He, Zeyi

    2012-01-01

    Thanks to Information and Communication Technologies (ICTs), every action on the Internet nowadays is recorded by digital by-product data: online purchases, tagging friends' photos, browsing webpages, etc. This unprecedented technological revolution has empowered us with unique abilities to understand not only people's behaviours, but also online platforms. Business corporates and academic researchers alike have both embarked on actively mining such information to stay ahead of the game in th...

  1. Hybrid poplar and forest soil response to municipal and industrial by-products: a greenhouse study.

    Science.gov (United States)

    Cavaleri, Molly A; Gilmore, Daniel W; Mozaffari, Morteza; Rosen, Carl J; Halbach, Thomas R

    2004-01-01

    Little research has been conducted in the Lake States (Minnesota, Wisconsin, and Michigan) to evaluate the effects of municipal and industrial by-product applications on the early growth of short rotation woody crops such as hybrid poplar. Anticipated shortages of harvestable-age aspen in the next decade can be alleviated and rural development can be enhanced through the application of by-products to forest soils. This study was conducted to evaluate the effects of inorganic fertilizer, boiler ash, biosolids, and the co-application of ash and biosolids application on tree growth and soil properties by measuring hybrid poplar clone NM-6 (Populus nigra L. x P. maximowiczii A. Henry) yield, nutrient uptake, and select post-harvest soil properties after 15 wk of greenhouse growth. Treatments included a control of no amendment; agricultural lime; inorganic N, P, and K; three types of boiler ash; biosolids application rates equivalent to 70, 140, 210, and 280 kg available N ha(-1); and boiler ash co-applied with biosolids. All of the by-products treatments showed biomass production that was equal to or greater than inorganic fertilizer and lime treatments. A trend of increased biomass with increasing rates of biosolids was observed. Soil P concentration increased with increasing rates of biosolids application. None of the by-products treatments resulted in plant tissue metal concentrations greater than metal concentrations of plant tissue amended with inorganic amendments. Biosolids, boiler ash, and the co-application of biosolids and boiler ash together on forest soils were as beneficial to plant growth as inorganic fertilizers.

  2. Supercritical Technologies for the Valorization of Wine Industry By-Products

    OpenAIRE

    Duba, Kurabachew Simon

    2015-01-01

    This study aim at the valorization of wine industry by products; particularly on the extraction and characterization of grape seeds oil using supercritical CO2 (SC-CO2) and polyphenols from grape skins and defatted grape seeds using subcritical water (SW) and then, modeling of the kinetics of extractions and process economic analysis. The overall objective of the work is to develop recovery strategies for wine-making wastes in order to reduce their environmental impact and to valorize them in...

  3. Extraction yield, antioxidant activity andphenolics from grape, mango and peanut agro-industrial by-products

    OpenAIRE

    2016-01-01

    ABSTRACT: The objective of this study was to determine and correlate the extraction yields, antioxidant activity, total phenolics and total flavonoids from grape, mango and peanut agro-industrial by-products. The β-carotene/linoleic acid autoxidation system and scavenging capacity for DPPH and ABTS free radicals assays were used. The results were expressed in terms of lyophilized sample or dry extract. Mango bagasse exhibited the highest extraction yield (37.07%) followed by peanut skin ...

  4. Biorefinery cascade processing for creating added value on tomato industrial by-products from Tunisia

    OpenAIRE

    Kehili, Mouna; Schmidt, Lisa Marie; Reynolds, Wienke; Zammel, Ayachi; Zetzl, Carsten; Smirnova, Irina; Allouche, Noureddine; Sayadi, Sami

    2016-01-01

    Background In today’s consumer perception of industrial processes and food production, aspects like food quality, human health, environmental safety, and energy security have become the keywords. Therefore, much effort has been extended toward adding value to biowastes of agri-food industries through biorefinery processing approaches. This study focused, for the first time, on the valorization of tomato by-products of a Tunisian industry for the recovery of value-added compounds using biorefi...

  5. Identification and Mitigation of Generated Solid By-Products during Advanced Electrode Materials Processing.

    Science.gov (United States)

    Tsai, Candace S J; Dysart, Arthur D; Beltz, Jay H; Pol, Vilas G

    2016-03-01

    A scalable, solid-state elevated-temperature process was developed to produce high-capacity carbonaceous electrode materials for energy storage devices via decomposition of a starch-based precursor in an inert atmosphere. In a separate study, it is shown that the fabricated carbonaceous architectures are useful as an excellent electrode material for lithium-ion, sodium-ion, and lithium-sulfur batteries. This article focuses on the study and analysis of the formed nanometer-sized by-products during the lab-scale synthesis of the carbon material. The material production process was studied in operando (that is, during the entire duration of heat treatment). The unknown downstream particles in the process exhaust were collected and characterized via aerosol and liquid suspensions, and they were quantified using direct-reading instruments for number and mass concentrations. The airborne emissions were collected using the Tsai diffusion sampler (TDS) for characterization and further analysis. Released by-product aerosols collected in a deionized (DI) water trap were analyzed, and the aerosols emitted from the post-water-suspension were collected and characterized. After long-term sampling, individual particles in the nanometer size range were observed in the exhaust aerosol with layer-structured aggregates formed on the sampling substrate. Upon the characterization of the released aerosol by-products, methods were identified to mitigate possible human and environmental exposures upon industrial implementation.

  6. [Degradation Kinetics and Formation of Disinfection By-products During Linuron Chlorination in Drinking Water].

    Science.gov (United States)

    Ling, Xiao; Hu, Chen-yan; Cheng, Ming; Gu, Jian

    2015-05-01

    Chlorination degradation of linuron was studied using the common disinfectant sodium hypochlorite, the effects of chlorine dosage, pH value, bromine ion concentrationand temperature were systematically investigated, and the formation characteristics of disinfection by-products (DBPs) during the chlorination reaction was analyzed. The results showed that the chlorination degradation kinetics of linuron by sodium hypochlorite could be well described by the second-order kinetic model. Moreover, pH values had a great impact on the degradation reaction, and the rate constant reached the maximum level at pH 7, and the base elementary reaction rate constants of HOCl and OCl- with linuron were 4.84 x 10(2) L · (mol · h)(-1) and 3.80 x 10(2) L · (mol · h)(-1), respectively. The reaction rate decreased with the addition of bromide ion and increased with increasing temperature. Furthermore, many kinds of disinfection by- products were produced during the chlorination degradation of linuron, including CF, DCAN, TCNM and halogen acetone. Under conditions of different solution pH and different bromide ion concentrations, there would be significant difference in the types and concentrations of disinfection by-products.

  7. Study on Properties of Environment-friendly Concrete Containing Large Amount of Industrial by-products

    Science.gov (United States)

    Fujiwara, H.; Maruoka, M.; Sadayama, C.; Nemoto, M.; Yoshikawa, K.; Yamaji, M.

    2015-11-01

    This study aims to reduce CO2 discharged from the cement and concrete industries by effective use of industrial by-products, such as fly ash, blast furnace slag, and so on. In this paper, the properties of concrete containing large amount of industrial by-products and very small amount of alkaline activator including cement or sludge from ready mixed concrete plant are analyzed. As the result, it was confirmed that concretes containing large amount of industrial by-products can achieve sufficient compressive strength. However, these concretes showed poor frost resistance. It was thought that the reason was coarsening of air void system and this caused their poor frost resistance. Therefore, in order to micronize the air void system and improve frost resistance, the combination of air entraining agent and antifoaming agent was applied. By this method, it was confirmed that the frost resistance of some these concrete improved. In this study, other properties of these concretes, such as fresh properties and other durability were evaluated and it was confirmed that these concretes show sufficient properties.

  8. Phytostabilization of semiarid soils residually contaminated with trace elements using by-products: Sustainability and risks

    Energy Technology Data Exchange (ETDEWEB)

    Perez-de-Mora, Alfredo, E-mail: perezdemora@gmail.com [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain); Madejon, Paula; Burgos, Pilar; Cabrera, Francisco [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain); Lepp, Nicholas W. [35, Victoria Road, Formby, Liverpool L37 7DH (United Kingdom); Madejon, Engracia [Instituto de Recursos Naturales y Agrobiologia de Sevilla (IRNAS), CSIC, PO Box 1052, 41080 Sevilla (Spain)

    2011-10-15

    We investigated the efficiency of various by-products (sugarbeet lime, biosolid compost and leonardite), based on single or repeated applications to field plots, on the establishment of a vegetation cover compatible with a stabilization strategy on a multi-element (As, Cd, Cu, Pb and Zn) contaminated soil 4-6 years after initial amendment applications. Results indicate that the need for re-treatment is amendment- and element-dependent; in some cases, a single application may reduce trace element concentrations in above-ground biomass and enhance the establishment of a healthy vegetation cover. Amendment performance as evaluated by % cover, biomass and number of colonizing taxa differs; however, changes in plant community composition are not necessarily amendment-specific. Although the translocation of trace elements to the plant biotic compartment is greater in re-vegetated areas, overall loss of trace elements due to soil erosion and plant uptake is usually smaller compared to that in bare soil. - Highlights: > By-products enhance vegetation dynamics in contaminated semiarid soils. > Depending on the situation single or repeated incorporations may be required. > The structure of the plant community established is not amendment-dependent. > Phytostabilization reduces overall loss of trace elements in semiarid soils. - Phytostabilization using by-products as amendments is a suitable approach for long-term immobilization of various trace elements in semiarid contaminated soils.

  9. Campylobacter contamination in retail poultry meats and by-products in the world: a literature survey.

    Science.gov (United States)

    Suzuki, Hodaka; Yamamoto, Shigeki

    2009-03-01

    Campylobacter species are common bacterial pathogens associated with human gastroenteritis worldwide. In North America, Europe and Japan, campylobacteriosis is one of the leading food-borne bacterial illnesses and the consumption of poultry meats and/or by-products is suspected a major cause of the illness. In this survey, we summarized the research papers describing Campylobacter contamination of retail poultry meats and by-products in various countries of the world. In most of the countries, a majority of retail poultry meats and by-products were contaminated with Campylobacter spp. C. jejuni was usually the dominant Campylobacter species isolated from retail poultry and C. coli was less frequently isolated, although the ratio of C. coli to C. jejuni was considerably different among the countries. However, in Thailand and South Africa, C. coli was the dominant Campylobacter species isolated from retail poultry. A large portion of retail poultry was contaminated with Campylobacter spp. in the world; therefore, further trials are required for finding proper countermeasures and attention should be paid for the sanitary handling of poultry products.

  10. Socioeconomic status and exposure to disinfection by-products in drinking water in Spain

    Directory of Open Access Journals (Sweden)

    Serra Consol

    2011-03-01

    Full Text Available Abstract Background Disinfection by-products in drinking water are chemical contaminants that have been associated with cancer and other adverse effects. Exposure occurs from consumption of tap water, inhalation and dermal absorption. Methods We determined the relationship between socioeconomic status and exposure to disinfection by-products in 1271 controls from a multicentric bladder cancer case-control study in Spain. Information on lifetime drinking water sources, swimming pool attendance, showering-bathing practices, and socioeconomic status (education, income was collected through personal interviews. Results The most highly educated subjects consumed less tap water (57% and more bottled water (33% than illiterate subjects (69% and 17% respectively, p-value = 0.003. These differences became wider in recent time periods. The time spent bathing or showering was positively correlated with attained educational level (p Conclusions The most highly educated subjects were less exposed to chlorination by-products through ingestion but more exposed through dermal contact and inhalation in pools and showers/baths. Health risk perceptions and economic capacity may affect patterns of water consumption that can result in differences in exposure to water contaminants.

  11. Industrial waste materials and by-products as thermal energy storage (TES) materials: A review

    Science.gov (United States)

    Gutierrez, Andrea; Miró, Laia; Gil, Antoni; Rodríguez-Aseguinolaza, Javier; Barreneche, Camila; Calvet, Nicolas; Py, Xavier; Fernández, A. Inés; Grágeda, Mario; Ushak, Svetlana; Cabeza, Luisa F.

    2016-05-01

    A wide variety of potential materials for thermal energy storage (TES) have been identify depending on the implemented TES method, Sensible, latent or thermochemical. In order to improve the efficiency of TES systems more alternatives are continuously being sought. In this regard, this paper presents the review of low cost heat storage materials focused mainly in two objectives: on the one hand, the implementation of improved heat storage devices based on new appropriate materials and, on the other hand, the valorisation of waste industrial materials will have strong environmental, economic and societal benefits such as reducing the landfilled waste amounts, reducing the greenhouse emissions and others. Different industrial and municipal waste materials and by products have been considered as potential TES materials and have been characterized as such. Asbestos containing wastes, fly ashes, by-products from the salt industry and from the metal industry, wastes from recycling steel process and from copper refining process and dross from the aluminium industry, and municipal wastes (glass and nylon) have been considered. This work shows a great revalorization of wastes and by-product opportunity as TES materials, although more studies are needed to achieve industrial deployment of the idea.

  12. Bioassay-guided fractionation of a hepatoprotective and antioxidant extract of pea by-product.

    Science.gov (United States)

    Seida, Ahmed A; El Tanbouly, Nebal D; Islam, Wafaa T; Eid, Hanaa H; El Maraghy, Shohda A; El Senousy, Amira S

    2015-01-01

    The hepatoprotective and antioxidant activities of the hydroalcoholic extract (PE) of pea (Pisum sativum L.) by-product were evaluated, using CCl4-induced oxidative stress and hepatic damage in rats. These activities were assessed via measuring alanine aminotransferase (ALT), aspartate aminotransferase (AST), total protein and albumin, malondialdehyde (MDA), reduced glutathione (GSH), protein thiols (PSH), nitrite/nitrate levels, glutathione-peroxidase (GSH-Px), glutathione-S-transferase (GST) activities, as well as, histopathological evaluation. PE revealed significant hepatoprotective and antioxidant activities mostly found in n-butanol fraction. Chromatographic fractionation of this active fraction led to the isolation of five flavonoid glycosides namely, quercetin-3-O-sophorotrioside (1), quercetin-3-O-rutinoside (2), quercetin-3-O-(6″″-O-E sinapoyl)-sophorotrioside (3), quercetin-3-O-(6″″-O-E feruloyl)-sophorotrioside (4) and quercetin-3-O-β-D-glucopyranoside (5). The isolated compounds were quantified in PE, using a validated HPLC method and the nutritional composition of pea by-product was also investigated. Our results suggest that pea by-product contained biologically active constituents which can be utilised to obtain high value added products for nutraceutical use.

  13. Determination of aflatoxins in by-products of industrial processing of cocoa beans.

    Science.gov (United States)

    Copetti, Marina V; Iamanaka, Beatriz T; Pereira, José Luiz; Lemes, Daniel P; Nakano, Felipe; Taniwaki, Marta H

    2012-01-01

    This study has examined the occurrence of aflatoxins in 168 samples of different fractions obtained during the processing of cocoa in manufacturing plants (shell, nibs, mass, butter, cake and powder) using an optimised methodology for cocoa by-products. The method validation was based on selectivity, linearity, limit of detection and recovery. The method was shown to be adequate for use in quantifying the contamination of cocoa by aflatoxins B(1), B(2), G(1) and G(2). Furthermore, the method was easier to use than other methods available in the literature. For aflatoxin extraction from cocoa samples, a methanol-water solution was used, and then immunoaffinity columns were employed for clean-up before the determination by high-performance liquid chromatography. A survey demonstrated a widespread occurrence of aflatoxins in cocoa by-products, although in general the levels of aflatoxins present in the fractions from industrial processing of cocoa were low. A maximum aflatoxin contamination of 13.3 ng g(-1) was found in a nib sample. The lowest contamination levels were found in cocoa butter. Continued monitoring of aflatoxins in cocoa by-products is nevertheless necessary because these toxins have a high toxicity to humans and cocoa is widely consumed by children through cocoa-containing products, like candies.

  14. A Review of Antioxidant Peptides Derived from Meat Muscle and By-Products

    Science.gov (United States)

    Liu, Rui; Xing, Lujuan; Fu, Qingquan; Zhou, Guang-hong; Zhang, Wan-gang

    2016-01-01

    Antioxidant peptides are gradually being accepted as food ingredients, supplemented in functional food and nutraceuticals, to positively regulate oxidative stress in the human body against lipid and protein oxidation. Meat muscle and meat by-products are rich sources of proteins and can be regarded as good materials for the production of bioactive peptides by use of enzymatic hydrolysis or direct solvent extraction. In recent years, there has been a growing number of studies conducted to characterize antioxidant peptides or hydrolysates derived from meat muscle and by-products as well as processed meat products, including dry-cured hams. Antioxidant peptides obtained from animal sources could exert not only nutritional value but also bioavailability to benefit human health. This paper reviews the antioxidant peptides or protein hydrolysates identified in muscle protein and by-products. We focus on the procedure for the generation of peptides with antioxidant capacity including the acquisition of crude peptides, the assessment of antioxidant activity, and the purification and identification of the active fraction. It remains critical to perform validation experiments with a cell model, animal model or clinical trial to eliminate safety concerns before final application in the food system. In addition, some of the common characteristics on structure-activity relationship are also reviewed based on the identified antioxidant peptides. PMID:27657142

  15. A Review of Antioxidant Peptides Derived from Meat Muscle and By-Products

    Directory of Open Access Journals (Sweden)

    Rui Liu

    2016-09-01

    Full Text Available Antioxidant peptides are gradually being accepted as food ingredients, supplemented in functional food and nutraceuticals, to positively regulate oxidative stress in the human body against lipid and protein oxidation. Meat muscle and meat by-products are rich sources of proteins and can be regarded as good materials for the production of bioactive peptides by use of enzymatic hydrolysis or direct solvent extraction. In recent years, there has been a growing number of studies conducted to characterize antioxidant peptides or hydrolysates derived from meat muscle and by-products as well as processed meat products, including dry-cured hams. Antioxidant peptides obtained from animal sources could exert not only nutritional value but also bioavailability to benefit human health. This paper reviews the antioxidant peptides or protein hydrolysates identified in muscle protein and by-products. We focus on the procedure for the generation of peptides with antioxidant capacity including the acquisition of crude peptides, the assessment of antioxidant activity, and the purification and identification of the active fraction. It remains critical to perform validation experiments with a cell model, animal model or clinical trial to eliminate safety concerns before final application in the food system. In addition, some of the common characteristics on structure-activity relationship are also reviewed based on the identified antioxidant peptides.

  16. Variable leak gas source

    Science.gov (United States)

    Henderson, Timothy M.; Wuttke, Gilbert H.

    1977-01-01

    A variable leak gas source and a method for obtaining the same which includes filling a quantity of hollow glass micro-spheres with a gas, storing said quantity in a confined chamber having a controllable outlet, heating said chamber above room temperature, and controlling the temperature of said chamber to control the quantity of gas passing out of said controllable outlet. Individual gas filled spheres may be utilized for calibration purposes by breaking a sphere having a known quantity of a known gas to calibrate a gas detection apparatus.

  17. Flue gas treatment with membrane gas absorption

    NARCIS (Netherlands)

    Klaassen, R.; Feron, P.H.M.; Jansen, A.E.

    1998-01-01

    Dutch researchers from the TN0 Institute have developed a technique to carry out gas-liquid contacting operations using hollow fibre membranes in combination with an absorption liquid. The method known as membrane gas absorption, aims to combine the advantages of membrane technology (compactness, fl

  18. Gas purification using membrane gas absorption processes

    NARCIS (Netherlands)

    Dindore, V.Y.

    2003-01-01

    Owing to the increasing energy demand and the abundance of low quality natural gas reservoirs containing high percentages of CO2, considerable attention is given to the bulk removal of CO2 and upgrading of low quality natural gas. The main goal in doing so is to increase the heating value of natural

  19. World Natural Gas Model

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    RAMSGAS, the Research and Development Analysis Modeling System World Natural Gas Model, was developed to support planning of unconventional gaseoues fuels research and development. The model is a scenario analysis tool that can simulate the penetration of unconventional gas into world markets for oil and gas. Given a set of parameter values, the model estimates the natural gas supply and demand for the world for the period from 1980 to 2030. RAMSGAS is based on a supply/demand framwork and also accounts for the non-renewable nature of gas resources. The model has three fundamental components: a demand module, a wellhead production cost module, and a supply/demand interface module. The demand for gas is a product of total demand for oil and gas in each of 9 demand regions and the gas share. Demand for oil and gas is forecast from the base year of 1980 through 2030 for each demand region, based on energy growth rates and price-induced conservation. For each of 11 conventional and 19 unconventional gas supply regions, wellhead production costs are calculated. To these are added transportation and distribution costs estimates associated with moving gas from the supply region to each of the demand regions and any economic rents. Based on a weighted average of these costs and the world price of oil, fuel shares for gas and oil are computed for each demand region. The gas demand is the gas fuel share multiplied by the total demand for oil plus gas. This demand is then met from the available supply regions in inverse proportion to the cost of gas from each region. The user has almost complete control over the cost estimates for each unconventional gas source in each year and thus can compare contributions from unconventional resources under different cost/price/demand scenarios.

  20. Natural gas annual 1996

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-09-01

    This document provides information on the supply and disposition of natural gas to a wide audience. The 1996 data are presented in a sequence that follows natural gas from it`s production to it`s end use.

  1. Sulphur hexafluoride gas detection

    CSIR Research Space (South Africa)

    Stolper, R

    2006-02-01

    Full Text Available This poster describes the development process of an electro-optical based solution for detecting and locating SF6 gas leaks at gas insulated switch gear. The principal technologies that were researched are explained with their advantages...

  2. Natural Gas Basics

    Energy Technology Data Exchange (ETDEWEB)

    None

    2016-06-08

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  3. Natural Gas Basics

    Energy Technology Data Exchange (ETDEWEB)

    2016-06-01

    Natural gas powers about 150,000 vehicles in the United States and roughly 22 million vehicles worldwide. Natural gas vehicles (NGVs) are a good choice for high-mileage fleets -- such as buses, taxis, and refuse vehicles -- that are centrally fueled or operate within a limited area or along a route with natural gas fueling stations. This brochure highlights the advantages of natural gas as an alternative fuel, including its domestic availability, established distribution network, relatively low cost, and emissions benefits.

  4. CHINA'S GAS MARKET TODAY

    Institute of Scientific and Technical Information of China (English)

    Chu Haihong

    2005-01-01

    @@ According to JPMorgan's review 2003 of China's gas market,China's household gas price was one of the lowest in the world, 20% below the global average. Despite the increase in recent years, China's domestic gas price is still relatively low in the global context. It is safe to say that the low gas price is one of the keys attracting keen investments currently from overseas and domestic private capitals.

  5. Natural gas annual 1994

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-11-17

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1994 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1990 to 1994 for each Census Division and each State. Annual historical data are shown at the national level.

  6. Gas phase ion chemistry

    CERN Document Server

    Bowers, Michael T

    1979-01-01

    Gas Phase Ion Chemistry, Volume 2 covers the advances in gas phase ion chemistry. The book discusses the stabilities of positive ions from equilibrium gas-phase basicity measurements; the experimental methods used to determine molecular electron affinities, specifically photoelectron spectroscopy, photodetachment spectroscopy, charge transfer, and collisional ionization; and the gas-phase acidity scale. The text also describes the basis of the technique of chemical ionization mass spectrometry; the energetics and mechanisms of unimolecular reactions of positive ions; and the photodissociation

  7. Natural gas annual 1995

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1996-11-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1995 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1991 to 1995 for each Census Division and each State. Annual historical data are shown at the national level.

  8. Liquid propellant gas generators

    Science.gov (United States)

    1972-01-01

    The design of gas generators intended to provide hot gases for turbine drive is discussed. Emphasis is placed on the design and operation of bipropellant gas generators because of their wider use. Problems and limitations involved in turbine operation due to temperature effects are analyzed. Methods of temperature control of gas turbines and combustion products are examined. Drawings of critical sections of gas turbines to show their operation and areas of stress are included.

  9. Strategy of Utilization of Locally Available Crop Residues and By-Products for Livestock Feeding in Tunisia

    OpenAIRE

    Moujahed-Raach, A.; Moujahed, N.; Kayouli, C

    2001-01-01

    Important quantifies of crops residues and by-products are yearly available in North African countries. This paper presents the screening of the most important by-products in Tunisia, their nutritional characteristics and the appropriate strategies to use most of them in order to improve ruminants feeding systems. One or several by-products are specifie of each region of the country, but most of them are localised in the northern region. Some of the agricultural wastes are available in import...

  10. Three annual flue gas desulfurization gypsum applications on macronutrient and micronutrient losses in runoff from bermudagrass fertilized with poultry litter

    Science.gov (United States)

    Considerable amounts of flue gas desulfurization (FGD) gypsum are being produced as a by-product of generating electricity. As a result, beneficial reuse of this by-product is being sought to reduce landfilling and its associated cost. The use of this byproduct as a low-cost soil amendment for suppl...

  11. Microscale Gas Chemistry

    Science.gov (United States)

    Mattson, Bruce; Anderson, Michael P.

    2011-01-01

    The development of syringes having free movement while remaining gas-tight enabled methods in chemistry to be changed. Successfully containing and measuring volumes of gas without the need to trap them using liquids made it possible to work with smaller quantities. The invention of the LuerLok syringe cap also allowed the gas to be stored for a…

  12. Demonstrating the Gas Laws.

    Science.gov (United States)

    Holko, David A.

    1982-01-01

    Presents a complete computer program demonstrating the relationship between volume/pressure for Boyle's Law, volume/temperature for Charles' Law, and volume/moles of gas for Avagadro's Law. The programing reinforces students' application of gas laws and equates a simulated moving piston to theoretical values derived using the ideal gas law.…

  13. A Management State of POPs (Persistent Organic Pollutants) and the Measuring Direction - Centered By-Products

    Energy Technology Data Exchange (ETDEWEB)

    Park, Jeong Gyu; Lee, Hee Seon [Korea Environment Institute, Seoul (Korea)

    2000-12-01

    The chemical materials, DDT and Dioxin, threaten the human health and take the high toxicity on ecosystem and a living thing. Because the chemical materials remain in environment for a long time due to a slow natural decomposition, they are biologically concentrated through the food cycle in ecosystem and have a characteristic to move a long distance. Owing to such toxicity and the characteristics of chemical materials, the world organization named them as Persistent Organic Pollutants (POPs) and has been actively progressing the international movement to strictly restrict them since the middle of 1990s. POPs regulation agreement, which is on progress centered in UNEP, is facing to the conclusion of the agreement of 2001 year. An agricultural chemical of organic chlorine among 12 POPs indicated by UNEP has been already prohibited in the domestic use and manufacturing or not registered, so the basic research, including search and monitoring if POPs remain or not, is required afterward. Because Dioxin, Puran, Hexachlorobenzene (HCB) among POPs, which are produced as by-products from all kinds of industrial processes, are not raw materials dislike other POPs, their use and manufacturing cannot be only prohibited by the related law but also they have few substitutes. Therefore, they should be applied by the different regulation from the existing toxic chemicals in order to manage the toxicity of the materials. However, the regulation on by-products among POPs is just in the beginning stage, and even the producing source has not been yet confirmed. This study suggests the necessity of the management on Dioxin, Puran, HCB, by-products among POPs, and presents the measuring direction with grasping the domestic and foreign trend of the regulation on the materials. 70 refs., 2 figs., 56 tabs.

  14. Utilization of agro-based industrial by-products for biogas production in Vietnam

    Energy Technology Data Exchange (ETDEWEB)

    Ngoc, U.N.; Schnitzer, H. [Graz Univ. of Technology, (Austria). Inst. for Resource Efficient and Sustainable Systems; Berghold, H. [Joanneum Research Inst. for Sustainable Techniques and Systems (Austria)

    2007-07-01

    Due to the rapid rates of urbanization occurring in many countries in the world, the importance of an efficient and effective solid waste management system and the utilization/reuse of waste are more critical than ever before, especially for agricultural residues and agro-based industrial by-products. Over the past decade, the amount of solid waste generated in Vietnam has been increasing steadily. Numbers are predicted to continue to increase as well. There is significant potential to use the large amount of wastes for biogas conversion processes and for further production of commercial energy. This paper presented starts with estimation and analysis of the amounts of organic waste, agricultural residues, and agro-based industrial by-products generated from food industrial processes using general data sources for Vietnam. A laboratory study examined the use of agro-based industrial by-products and agricultural residues from cassava, sweet potato, pineapple residues, organic wastes, manures as input materials for biogas production in the anaerobic process. This paper provided an overview of Vietnam as a country, as well as a general overview of the amount of organic waste generated in the country. It also discussed the fermentation tests that were conducted to find out the potential of biogas production from some residues. It was concluded that a significant portion of waste could be reused as an environmentally sound source of energy. The utilization of agricultural residues and industrial byproducts as input materials for biogas production will not only reduce the quantity of organic waste thrown into landfills, but also reduce the negative impact on the environment. 10 refs., 7 tabs., 7 figs.

  15. Treatment of metal-laden hazardous wastes with advanced Clean Coal Technology by-products

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini; Wiles Elder

    1999-04-05

    This eleventh quarterly report describes work done during the eleventh three-month period of the University of Pittsburgh's project on the ``Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing and giving presentations, and making and responding to two outside contacts.

  16. Extractants to assess zinc phytoavailability in mineral fertilizer and industrial by-products

    Directory of Open Access Journals (Sweden)

    Camila Prado Cenciani de Souza

    2013-08-01

    Full Text Available Efficient analytical methods for the quantification of plant-available Zn contained in mineral fertilizers and industrial by-products are fundamental for the control and marketing of these inputs. In this sense, there are some doubts on the part of the scientific community as well as of the fertilizer production sector, whether the extractor requested by the government (Normative Instruction No. 28, called 2nd extractor, which is citric acid 2 % (2 % CA (Brasil, 2007b, is effective in predicting the plant availability of Zn via mineral fertilizers and about the agronomic significance of the required minimal solubility of 60 % compared to the total content (HCl (Brasil, 2007a. The purpose of this study was to evaluate the alternative extractors DTPA, EDTA, neutral ammonium citrate (NAC, buffer solution pH 6.0, 10 % HCl, 10 % sulfuric acid, 1 % acetic acid, water, and hot water to quantify the contents of Zn available for maize and compare them with indices of agronomic efficiency of fertilizers and industrial by-products when applied to dystrophic Clayey Red Latosol and Dystrophic Alic Red Yellow Latosol with medium texture. The rate of Zn applied to the soil was 5 mg kg-1, using the sources zinc sulfate, commercial granular zinc, ash and galvanic sludge, ash and two brass slags. Most Zn was extracted from the sources by DTPA, 10 % HCl, NAC, 1% acetic acid, and 10 % sulfuric acid. Recovery by the extractors 2 % CA, EDTA, water, and hot water was low. The agronomic efficiency index was found to be high when using galvanic sludge (238 % and commercial granular zinc (142 % and lower with brass slag I and II (67 and 27 %, respectively. The sources galvanizing ash and brass ash showed solubility lower than 60 % in 2 % CA, despite agronomic efficiency indices of 78 and 125 %, respectively. The low agronomic efficiency index of industrial by-products such as brass slag I and galvanizing ash can be compensated by higher doses, provided there is no

  17. By-products of the Thermal Treatment of Hazardous Waste: Formation and Health Effects.

    Science.gov (United States)

    Walsh, Maud; Cormier, Stephania; Varner, Kurt; Dellinger, Barry

    2010-04-01

    Destruction of toxic chemicals by thermal treatment can be a highly effective method for remediation of sites contaminated with hazardous substances. Of the 977 Superfund source control treatment projects in the United States from 1982 to 2005, 16% used incineration or other thermal treatments (the proportion is similar for 126 projects in the period 2002-2005).(1) However, as with other technologies, if thermal treatments are not matched correctly with the site or are improperly operated, harmful by-products can form, requiring further treatment.

  18. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-01-01

    This seventeenth quarterly report describes work done during the seventeenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, giving a presentation, submitting a manuscript and making and responding to one outside contact.

  19. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-05-11

    This fifteenth quarterly report describes work done during the fifteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing and giving presentations, and making and responding to several outside contacts.

  20. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-06-01

    This sixteenth quarterly report describes work done during the sixteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, giving a presentation, and making and responding to several outside contacts.

  1. Biological waste by-production costs in forest management and possibilities for their reduction

    Directory of Open Access Journals (Sweden)

    Jiří Kadlec

    2004-01-01

    Full Text Available Biological wastes in forestry were observed from view of their by-production in silvicultural and logging operations. There were identified points where biological waste was produced in this paper, waste costs ratio for silvicultural and logging operations and were made suggestions for reduction of these costs. Biological waste costs give 34.4% of total costs of silvicultural operations and 30% of total costs of logging operations. Natural regeneration and minor forest produce operations are opportunities for reduction of these costs.

  2. Biorefinery cascade processing for creating added value on tomato industrial by-products from Tunisia.

    Science.gov (United States)

    Kehili, Mouna; Schmidt, Lisa Marie; Reynolds, Wienke; Zammel, Ayachi; Zetzl, Carsten; Smirnova, Irina; Allouche, Noureddine; Sayadi, Sami

    2016-01-01

    In today's consumer perception of industrial processes and food production, aspects like food quality, human health, environmental safety, and energy security have become the keywords. Therefore, much effort has been extended toward adding value to biowastes of agri-food industries through biorefinery processing approaches. This study focused, for the first time, on the valorization of tomato by-products of a Tunisian industry for the recovery of value-added compounds using biorefinery cascade processing. The process integrated supercritical CO2 extraction of carotenoids within the oil fractions from tomato seeds (TS) and tomato peels (TP), followed by a batch isolation of protein from the residues. The remaining lignocellulosic matter from both fractions was then submitted to a liquid hot water (LHW) hydrolysis. Supercritical CO2 experiments extracted 5.79% oleoresin, 410.53 mg lycopene/kg, and 31.38 mg β-carotene/kg from TP and 26.29% oil, 27.84 mg lycopene/kg, and 5.25 mg β-carotene/kg from TS, on dry weights. Protein extraction yields, nearing 30% of the initial protein contents equal to 13.28% in TP and 39.26% in TS, revealed that TP and TS are a rich source of essential amino acids. LHW treatment run at 120-200 °C, 50 bar for 30 min showed that a temperature of 160 °C was the most convenient for cellulose and hemicellulose hydrolysis from TP and TS, while keeping the degradation products low. Results indicated that tomato by-products are not only a green source of lycopene-rich oleoresin and tomato seed oil (TSO) and of protein with good nutritional quality but also a source of lignocellulosic matter with potential for bioethanol production. This study would provide an important reference for the concept and the feasibility of the cascade fractionation of valuable compounds from tomato industrial by-products.Graphical abstractSchema of biorefinery cascade processing of tomato industrial by-products toward isolation of valuable fractions.

  3. Utilization of cocoa by-products as an alternative source of energy

    Energy Technology Data Exchange (ETDEWEB)

    Agyeman, K.O.G.; Oldham, J.H.

    1986-01-01

    The complete utilization of the by-products from the cocoa industry of Ghana has been investigated. Large-scale collection of cocoa sweating (i.e. the liquid which drains from the fresh bean when exposed to air) using the basket and sweat-box methods has been devised. It was found that collection and alcohol fermentation of the sweating can be done by farmers themselves. The fermented sweating had an alcohol level of 7-10% (w/w). The dried cocoa husks have also been used successfully for either production of potash or as a source of fuel. 10 references.

  4. Hemp fines - an agricultural by-product for biocomposites? A holistic approach

    OpenAIRE

    Spierling, Sebastian; Koplin, Tobias; Endres, Hans-Josef

    2014-01-01

    The technical, environmental and economic potential of hemp fines as a natural filler in bioplastics to produce biocomposites is the subject of this study – giving a holistic overview. Hemp fines are an agricultural by-product of the hemp fibres and shives production. Shives and fibres are for example used in the paper, animal bedding or composite area. About 15 to 20 wt.-% per kg hemp straw results in hemp fines after processing. In 2010 about 11,439 metric tons of hemp fines were produced i...

  5. Potential for by-product recovery in geothermal energy operations issue paper

    Energy Technology Data Exchange (ETDEWEB)

    None

    1982-07-01

    This document identifies and discusses the significant issues raised by the idea of recovering useful by-products from wastes (primarily spent brine) generated during geothermal power production. The physical availability of numerous valuable materials in geothermal brines has captured the interest of geothermal resource developers and other parties ever since their presence was known. The prospects for utilizing huge volumes of highly-saline geothermal brines for electricity generation in the Imperial Valley of California have served to maintain this interest in both private sector and government circles.

  6. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.; Ronald D. Neufeld; Jana Agostini

    1999-05-10

    This fourteenth quarterly report describes work done during the fourteenth three-month period of the University of Pittsburgh's project on the ''Treatment of Metal-Laden Hazardous Wastes with Advanced Clean Coal Technology By-Products.'' This report describes the activities of the project team during the reporting period. The principal work has focused upon new laboratory evaluation of samples from Phase 1, discussions with MAX Environmental Technologies, Inc., on the field work of Phase 2, preparing presentations, and making and responding to two outside contacts.

  7. Natural Gas Gathering and Purification in Sichuan Gas Fields

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhilin

    1996-01-01

    @@ Natural Gas Gathering and Transmission Technology The construction of gas gathering & transmission lines and stations is an important part of the surface construction of gas fields, whose investment accounts for about half of the total in gas field's development.

  8. Marketing mix - commercial gas

    Energy Technology Data Exchange (ETDEWEB)

    Ford, M.F.

    1975-07-01

    British Gas Corp. points out that a substantial increase in the use of gas in Great Britain's commercial energy market has occurred in the past 6 yr. Some of the newest applications of gas are in the areas of the cook/freeze system of preparing frozen foods in commercial catering, commissariats preparing in-flight food, and heating/cooling systems of large buildings. The variety of buildings and institutions using gas-fired systems indicates that, with the sensible pricing policies and the security of an indigenous fuel, the commercial market for gas will continue to develop for several years in Britain.

  9. Effect of chlorine dioxide on cyanobacterial cell integrity, toxin degradation and disinfection by-product formation.

    Science.gov (United States)

    Zhou, Shiqing; Shao, Yisheng; Gao, Naiyun; Li, Lei; Deng, Jing; Zhu, Mingqiu; Zhu, Shumin

    2014-06-01

    Bench scale tests were conducted to study the effect of chlorine dioxide (ClO2) oxidation on cell integrity, toxin degradation and disinfection by-product formation of Microcystis aeruginosa. The simulated cyanobacterial suspension was prepared at a concentration of 1.0×10(6)cells/mL and the cell integrity was measured with flow cytometry. Results indicated that ClO2 can inhibit the photosynthetic capacity of M. aeruginosa cells and almost no integral cells were left after oxidation at a ClO2 dose of 1.0mg/L. The total toxin was degraded more rapidly with the ClO2 dosage increasing from 0.1mg/L to 1.0mg/L. Moreover, the damage on cell structure after oxidation resulted in released intracellular organic matter, which contributed to the formation of trihalomethanes (THMs) and haloacetic acids (HAAs) as disinfection by-products. Therefore, the use of ClO2 as an oxidant for treating algal-rich water should be carefully considered.

  10. Transforming beef by-products into valuable ingredients: which spell/recipe to use?

    Directory of Open Access Journals (Sweden)

    Maeve Mary Henchion

    2016-11-01

    Full Text Available Satisfying the increasing global demand for protein results in challenges from a supply perspective. Increased use of animal proteins, through greater use of meat by-products, could form part of the solution, subject to consumer acceptance. This research investigates consumer evaluations of food products that incorporate ingredients derived from offals that have been produced through a range of food processing technologies. Using focus groups incorporating product stimuli representing various combinations of offals, processing and carrier products, the research finds that the physical state and perceived naturalness of the ingredients influences acceptance. It also highlights the impact of life experiences, linked to demographic characteristics, on interpretations and evaluations of products and processes. Ideational influences, i.e. knowledge of the nature or origin of the substance, are reasons for rejecting some concepts, with misalignment between nature of processing and the product resulting in rejection of others. Lack of perceived necessity also results in rejection. Alignment of ingredients with existing culinary practices and routines, communication of potential sensory or other benefits as well as naturalness are factors likely to promote acceptance, and generate repeat purchase, in some consumer segments. Trust in oversight that the products are safe is a prerequisite for acceptance in all cases. These findings have implications for pathways to increase sustainability of beef production and consumption through increased use of beef by-products.

  11. Bacterial Cellulose Production from Industrial Waste and by-Product Streams

    Directory of Open Access Journals (Sweden)

    Erminda Tsouko

    2015-07-01

    Full Text Available The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L and commercial sucrose (4.9 g/L were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102–138 g·water/g·dry bacterial cellulose, viscosities of 4.7–9.3 dL/g, degree of polymerization of 1889.1–2672.8, stress at break of 72.3–139.5 MPa and Young’s modulus of 0.97–1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients.

  12. Bacterial Cellulose Production from Industrial Waste and by-Product Streams

    Science.gov (United States)

    Tsouko, Erminda; Kourmentza, Constantina; Ladakis, Dimitrios; Kopsahelis, Nikolaos; Mandala, Ioanna; Papanikolaou, Seraphim; Paloukis, Fotis; Alves, Vitor; Koutinas, Apostolis

    2015-01-01

    The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen) 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L) and commercial sucrose (4.9 g/L) were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L) were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102–138 g·water/g·dry bacterial cellulose, viscosities of 4.7–9.3 dL/g, degree of polymerization of 1889.1–2672.8, stress at break of 72.3–139.5 MPa and Young’s modulus of 0.97–1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients. PMID:26140376

  13. Formation of nitrogenous disinfection by-products in 10 chlorinated and chloraminated drinking water supply systems.

    Science.gov (United States)

    Liew, Deborah; Linge, Kathryn L; Joll, Cynthia A

    2016-09-01

    The presence of nitrogenous disinfection by-products (N-DBPs) in drinking water supplies is a public health concern, particularly since some N-DBPs have been reported to be more toxic than the regulated trihalomethanes and haloacetic acids. In this paper, a comprehensive evaluation of the presence of N-DBPs in 10 drinking water supply systems in Western Australia is presented. A suite of 28 N-DBPs, including N-nitrosamines, haloacetonitriles (HANs), haloacetamides (HAAms) and halonitromethanes (HNMs), were measured and evaluated for relationships with bulk parameters in the waters before disinfection. A number of N-DBPs were frequently detected in disinfected waters, although at generally low concentrations (water, N-DBP concentrations were significantly correlated with dissolved organic carbon (DOC) and ammonia, and these, in addition to high bromide in one of the waters, led to elevated concentrations of brominated HANs (26.6 μg/L of dibromoacetonitrile). There were significant differences in the occurrence of all classes of N-DBPs between chlorinated and chloraminated waters, except for HNMs, which were detected at relatively low concentrations in both water types. Trends observed in one large distribution system suggest that N-DBPs can continue to form or degrade within distribution systems, and redosing of disinfectant may cause further by-product formation.

  14. PIXE characterization of by-products resulting from the zinc recycling of industrial cemented carbides

    Energy Technology Data Exchange (ETDEWEB)

    Freemantle, C.S. [School of Chemical & Metallurgical Engineering and DST-NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P/Bag 3, Wits 2050 (South Africa); Pilot Tools (Pty) (Ltd), P.O. Box 27420, Benrose 2011 (South Africa); Sacks, N. [School of Chemical & Metallurgical Engineering and DST-NRF Centre of Excellence in Strong Materials, University of the Witwatersrand, P/Bag 3, Wits 2050 (South Africa); Topic, M. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); Pineda-Vargas, C.A. [iThemba LABS, National Research Foundation, P.O. Box 722, Somerset West 7129 (South Africa); Faculty of Health & Wellness Sciences, CPUT, Bellville (South Africa)

    2015-11-15

    By-product materials of the widely used zinc recycling process of cemented carbides have been studied. Scanning electron microscopy and micro-PIXE techniques have identified elemental concentrations, distributions and purity of by-product materials from an industrial zinc recycling plant. Cobalt surface enrichment, lamellar microstructures of varying composition, including alternating tungsten carbide (WC) grains and globular cobalt, and regions of excess zinc contamination were found in materials with incomplete zinc penetration. Liquid Co–Zn formation occurred above 72 wt.% Zn at the furnace temperature of 930 °C, and was extracted towards the surface of poorly zinc infiltrated material, primarily by the vacuum used for zinc distillation. Surface enrichment was not observed in material that was zinc infiltrated to the sample center, which was more friable and exhibited more homogeneous porosity and elemental concentrations. The result of incomplete zinc infiltration was an enriched surface zone of up to 60 wt.% Co, compared to an original sample composition of ∼10–15 wt.% Co. The impact on resulting powders could be higher or inhomogeneous cobalt content, as well as unacceptably high zinc concentrations. PIXE has proven it can be a powerful technique for solving industrial problems in the cemented carbide cutting tool industry, by identifying trace elements and their locations (such as Zn to 0.1 wt.% accuracy), as well as the distribution of major elements within WC–Co materials.

  15. Problems and possible remedies concerning NORM in by-Product gypsum produced by the phosphate industry

    Energy Technology Data Exchange (ETDEWEB)

    Burnett, W.C.; Hull, C.D [Florida State Univ., Tallahassee, FL (United States). Dept. of Oceanography

    1996-12-31

    Large quantities ({approx} 30 million tons/year) of phosphogypsum are produced as a by-product of fertilizer production in Florida. The sedimentary phosphate rock, used as the raw material for phosphoric acid production, is enriched in uranium and daughter products. Relatively high concentrations of some of these U-series daughters, particularly {sup 226} Ra (av. = 910 Bq.Kg{sup -1}), prevent use of the by-product gypsum for construction or other purposes. The material is thus stockpiled on huge stacks which are unsightly and a potential threat to the surrounding air and especially groundwater resources. It is estimated that {approx} 10{sup 9} tons of this material will be on Florida stacks by the turn of the century. We have been investigating the detailed radiochemistry of phosphogypsum in the hope that can understanding of how these radionuclides are fixed in the material may lead to cost-effective purification schemes. Our work has focused on the distribution of {sup 226} Ra but has also included {sup 210} Pb and {sup 210} Po (av. = 860 Bq.Kg{sup -1}) which are also enriched in phosphogypsum. This paper summarizes the problems associated with this material and reviews its radiochemistry as elucidated by sequential extraction and other methodologies. We also present some possible alternatives to long-term storage as a solution to the phosphogypsum problem. (author) 4 figs., 1 tab.

  16. Heavy metal sorption by marine algae and algal by-products

    Energy Technology Data Exchange (ETDEWEB)

    Sandau, E. [IGV - Inst. fuer Getreideverarbeitung GmbH, Bergholz-Rehbruecke (Germany); Sandau, P. [IGV - Inst. fuer Getreideverarbeitung GmbH, Bergholz-Rehbruecke (Germany); Pulz, O. [IGV - Inst. fuer Getreideverarbeitung GmbH, Bergholz-Rehbruecke (Germany); Zimmermann, M. [Technische Hochschule Berlin (Germany). Fachbereich Chemie und Biotechnik

    1996-12-31

    All the oceans are plentiful with marine algae. Non-viable marine macroalgae are able to adsorb heavy metal ions. Compared with other biosorbents, such as fungi, bacteria, yeasts and microalgae, they have the advantage of being easily available, cheap and having high heavy metal sorption capacities. The by-products of marine phaeophyceae are even more cost-effective heavy metal biosorbers. Experiments of heavy metal sorption using non-viable Fucus vesiculosus, Ascophyllum nodosum and algal by-products were carried out to investigate the factors influencing and optimizing the heavy metal biosorption. The pH value, biomass concentration, heavy metal concentration, heavy metal species, competing ions, algal varieties and time were the most decisive parameters. The sorption isotherms showed increasing sorption capacities and decreasing sorption efficiencies with an increase in the initial heavy metal concentration. Sorption kinetics of different metals were established. Biomass concentration influenced the sorption efficiencies very much, but reduced the sorption capacity per g biomass. The pH value controlled the sorption (pH 3-7) and desorption (pH 1-2) decisively. Beside heavy metal contaminated model waters, actual industrial effluents were treated successfully by algal sorbents in batch experiments and continuous column tests. Transmission electron micrographs of different contaminated and untreated algal specimens are available. (orig.)

  17. Eco-efficiency through by-product synergy: North American case studies

    Energy Technology Data Exchange (ETDEWEB)

    Yates, J. R. [Hatch Associates, Mississauga, ON (Canada)

    2001-07-01

    The Business Council for Sustainable Development-Gulf of Mexico/US EPA defines the concept of by-products synergy (BPS) as 'the synergy among diverse industries, agriculture, and communities resulting in profitable conversion of by-products and wastes to resources promoting sustainability'. Various North American examples of this process are described (e.g. slag from steel production used in manufacturing portland cement, cellophane scrap used as a fluidizing agent in oil well operations, wood chips used to generate electricity, fly ash used in the manufacture of roofing shingles, and water from coffee processing used in waste-water treatment in a newsprint plant) to illustrate the concept's potential. In addition to benefits to the environment, the principal advantage of BPS is that it lowers the barriers that existed between industries in the past, and makes it possible to link disparate business partners, to move into new markets, and to combine products and services from different industries.

  18. Bacterial Cellulose Production from Industrial Waste and by-Product Streams.

    Science.gov (United States)

    Tsouko, Erminda; Kourmentza, Constantina; Ladakis, Dimitrios; Kopsahelis, Nikolaos; Mandala, Ioanna; Papanikolaou, Seraphim; Paloukis, Fotis; Alves, Vitor; Koutinas, Apostolis

    2015-07-01

    The utilization of fermentation media derived from waste and by-product streams from biodiesel and confectionery industries could lead to highly efficient production of bacterial cellulose. Batch fermentations with the bacterial strain Komagataeibacter sucrofermentans DSM (Deutsche Sammlung von Mikroorganismen) 15973 were initially carried out in synthetic media using commercial sugars and crude glycerol. The highest bacterial cellulose concentration was achieved when crude glycerol (3.2 g/L) and commercial sucrose (4.9 g/L) were used. The combination of crude glycerol and sunflower meal hydrolysates as the sole fermentation media resulted in bacterial cellulose production of 13.3 g/L. Similar results (13 g/L) were obtained when flour-rich hydrolysates produced from confectionery industry waste streams were used. The properties of bacterial celluloses developed when different fermentation media were used showed water holding capacities of 102-138 g · water/g · dry bacterial cellulose, viscosities of 4.7-9.3 dL/g, degree of polymerization of 1889.1-2672.8, stress at break of 72.3-139.5 MPa and Young's modulus of 0.97-1.64 GPa. This study demonstrated that by-product streams from the biodiesel industry and waste streams from confectionery industries could be used as the sole sources of nutrients for the production of bacterial cellulose with similar properties as those produced with commercial sources of nutrients.

  19. Degradation of bisphenol A by ozonation: rate constants, influence of inorganic anions, and by-products

    Directory of Open Access Journals (Sweden)

    Kheng Soo Tay

    2012-02-01

    Full Text Available The second-order rate constants for the reaction between bisphenol A (BPA and ozonewere evaluated over the pH range of 2-12. The rate constants showed minimum values (×104 M-1s-1under acidic condition (pH 10. From pH 4 to 7, the second-order rate constants were found to increase by a magnitudeof almost 102 and this was due to the increase in anionic BPA species in the solution. The rateconstants increased almost twofold when pH increased from 9.6 to 10.2. The presence of commoninorganic anions at levels commonly found in the environment did not affect the rate of degradationof BPA.The degradation by-products from the ozonation of BPA were identified as 4-(prop-1-en-2-ylphenol, hydroquinone, 4-hydroxyacetophenone, 2-(2-(4-hydroxyphenylpropan-2-ylsuccinaldehyde,2-(1-(4-hydroxyphenylvinylpent-2-enal, 3-formyl-4-(4-hydroxyphenyl-4-methylpent-2-enoic acid, monohydroxy-BPA and dihydroxy-BPA. In conclusion, ozonation was found to be aneffective method for the removal of BPA even in the presence of common inorganic anions atenvironmental concentrations. However, incomplete treatment of BPA might produce a variety ofdegradation by-products.

  20. A Hybrid MCDM Approach for Strategic Project Portfolio Selection of Agro By-Products

    Directory of Open Access Journals (Sweden)

    Animesh Debnath

    2017-07-01

    Full Text Available Due to the increasing size of the population, society faces several challenges for sustainable and adequate agricultural production, quality, distribution, and food safety in the strategic project portfolio selection (SPPS. The initial adaptation of strategic portfolio management of genetically modified (GM Agro by-products (Ab-Ps is a huge challenge in terms of processing the agro food product supply-chain practices in an environmentally nonthreatening way. As a solution to the challenges, the socio-economic characteristics for SPPS of GM food purchasing scenarios are studied. Evaluation and selection of the GM agro portfolio management are the dynamic issues due to physical and immaterial criteria involving a hybrid multiple criteria decision making (MCDM approach, combining modified grey Decision-Making Trial and Evaluation Laboratory (DEMATEL, Multi-Attributive Border Approximation area Comparison (MABAC and sensitivity analysis. Evaluation criteria are grouped into social, differential and beneficial clusters, and the modified DEMATEL procedure is used to derive the criteria weights. The MABAC method is applied to rank the strategic project portfolios according to the aggregated preferences of decision makers (DMs. The usefulness of the proposed research framework is validated with a case study. The GM by-products are found to be the best portfolio. Moreover, this framework can unify the policies of agro technological improvement, corporate social responsibility (CSR and agro export promotion.

  1. Valorization of Proteins from Co- and By-Products from the Fish and Meat Industry.

    Science.gov (United States)

    Aspevik, Tone; Oterhals, Åge; Rønning, Sissel Beate; Altintzoglou, Themistoklis; Wubshet, Sileshi Gizachew; Gildberg, Asbjørn; Afseth, Nils Kristian; Whitaker, Ragnhild Dragøy; Lindberg, Diana

    2017-06-01

    Large volumes of protein-rich residual raw materials, such as heads, bones, carcasses, blood, skin, viscera, hooves and feathers, are created as a result of processing of animals from fisheries, aquaculture, livestock and poultry sectors. These residuals contain proteins and other essential nutrients with potentially bioactive properties, eligible for recycling and upgrading for higher-value products, e.g. for human, pet food and feed purposes. Here, we aim to cover all the important aspects of achieving optimal utilization of proteins in such residual raw materials, identifying those eligible for human consumption as co-products and for feed applications as by-products. Strict legislation regulates the utilization of various animal-based co- and by-products, representing a major hurdle if not addressed properly. Thorough understanding and optimization of all parts of the production chain, including conservation and processing, are important prerequisites for successful upgrading and industrial implementation of such products. This review includes industrially applied technologies such as freezing/cooling, acid preservation, salting, rendering and protein hydrolysis. In this regard, it is important to achieve stable production and quality through all the steps in the manufacturing chain, preferably supported by at- or online quality control points in the actual processing step. If aiming for the human market, knowledge of consumer trends and awareness are important for production and successful introduction of new products and ingredients.

  2. Transforming Beef By-products into Valuable Ingredients: Which Spell/Recipe to Use?

    Science.gov (United States)

    Henchion, Maeve; McCarthy, Mary; O’Callaghan, Jim

    2016-01-01

    Satisfying the increasing global demand for protein results in challenges from a supply perspective. Increased use of animal proteins, through greater use of meat by-products, could form part of the solution, subject to consumer acceptance. This research investigates consumer evaluations of food products that incorporate ingredients derived from offals that have been produced through a range of food processing technologies. Using focus groups incorporating product stimuli representing various combinations of offals, processing, and carrier products, the research finds that the physical state and perceived naturalness of the ingredients influences acceptance. It also highlights the impact of life experiences, linked to demographic characteristics, on interpretations and evaluations of products and processes. Ideational influences, i.e., knowledge of the nature or origin of the substance, are reasons for rejecting some concepts, with misalignment between nature of processing and the product resulting in rejection of others. Lack of perceived necessity also results in rejection. Alignment of ingredients with existing culinary practices and routines, communication of potential sensory, or other benefits as well as naturalness are factors likely to promote acceptance, and generate repeat purchase, in some consumer segments. Trust in oversight that the products are safe is a prerequisite for acceptance in all cases. These findings have implications for pathways to increase sustainability of beef production and consumption through increased use of beef by-products. PMID:27965963

  3. Reduction of wastewaters and valorisation of by-products from "Serpa" cheese manufacture using nanofiltration.

    Science.gov (United States)

    Magueijo, V; Minhalma, M; Queiroz, D; Geraldes, V; Macedo, A; de Pinho, M N

    2005-01-01

    Second cheese whey (SCW) is a by-product of cheese and curd cheese production that is usually not recovered and therefore contributes substantially to the negative environmental impact of the cheese manufacture plants. Membrane technology, namely nanofiltration (NF), is used in this work for the recovery of SCW organic nutrients, resulting from "Serpa" cheese and curd production. The SCW is processed by NF to recover a rich lactose fraction in the concentrate and a process water with a high salt content in the permeate. The permeation experiments were carried out in a plate and frame NF unit, where two NF membranes (NFT50 and HR-95-PP) were characterized and tested. The NF permeation experiments were performed accordingly with two different operation modes: total recirculation and concentration. In order to select the best membrane and operating pressure for the SCW fractionation, total recirculation experiments were carried out. After the membrane selection, the concentration experiments showed that the selected membrane (NFT50) at 30 bar allows a water recovery of approximately 80%, concentrating the second cheese whey nutrients approximately 5 times. Therefore, the NF operation can successfully reduce the wastewater organic load and simultaneously contribute to the valorisation of the cheese and curd cheese manufacture by-products.

  4. Optimization of "Serpa" cheese whey nanofiltration for effluent minimization and by-products recovery.

    Science.gov (United States)

    Minhalma, Miguel; Magueijo, Vítor; Queiroz, Denise P; de Pinho, Maria Norberta

    2007-01-01

    Second cheese whey (SCW) is a by-product of cheese and curd cheese production that is usually not recovered and therefore substantially contributes to the negative environmental impact of the cheese manufacture plants. Membrane technology, namely nanofiltration (NF), is used in this work for the recovery of SCW organic nutrients, resulting from "Serpa" cheese and curd production. The SCW is processed by NF to recover a rich lactose fraction in the concentrate and a process water with a high salt content in the permeate. The permeation experiments were carried out in a plate & frame NF unit, where two NF membranes (NFT50 and HR-95-PP) were characterized and tested. The NF permeation experiments were performed accordingly with two different operation modes: total recirculation and concentration. In order to select the best membrane and operating pressure for the SCW fractionation, total recirculation experiments were carried out. The NF modeling was also performed, in terms of permeate fluxes and rejection coefficients using the resistances-in-series model and the solution-diffusion model, respectively. After the membrane selection, the concentration experiments showed that the selected membrane (NFT50) at 3.0MPa allows a water recovery of approximately 80%, concentrating the SCW nutrients approximately 5 times. Therefore, the NF operation can successfully reduce the wastewater organic load and simultaneously contributes to the valorization of the cheese and curd cheese manufacture by-products.

  5. Natural bioactive compounds from winery by-products as health promoters: a review.

    Science.gov (United States)

    Teixeira, Ana; Baenas, Nieves; Dominguez-Perles, Raul; Barros, Ana; Rosa, Eduardo; Moreno, Diego A; Garcia-Viguera, Cristina

    2014-09-04

    The relevance of food composition for human health has increased consumers' interest in the consumption of fruits and vegetables, as well as foods enriched in bioactive compounds and nutraceuticals. This fact has led to a growing attention of suppliers on reuse of agro-industrial wastes rich in healthy plant ingredients. On this matter, grape has been pointed out as a rich source of bioactive compounds. Currently, up to 210 million tons of grapes (Vitis vinifera L.) are produced annually, being the 15% of the produced grapes addressed to the wine-making industry. This socio-economic activity generates a large amount of solid waste (up to 30%, w/w of the material used). Winery wastes include biodegradable solids namely stems, skins, and seeds. Bioactive compounds from winery by-products have disclosed interesting health promoting activities both in vitro and in vivo. This is a comprehensive review on the phytochemicals present in winery by-products, extraction techniques, industrial uses, and biological activities demonstrated by their bioactive compounds concerning potential for human health.

  6. Determination of Physical, Chemical and Digestibility of some Agricultural by-products

    Directory of Open Access Journals (Sweden)

    majed dehgan

    2016-06-01

    Full Text Available In this experiment, physical and chemical characteristics and estimation of effective fiber and digestibility of some agricultural by-products such as lerd, pulp and date kernel, grape pomace, pistachio hulls, lime and rice straw were determined by using in vitro technique. Experimental data were analyzed as a complete randomized design, with three replicates. Physical and chemical characteristics and digestibility parameters among samples were significantly different. Rice straw due to high water holding capacity and low-density mass were floating on the liquid phase of reticulo-rumen and stimulates rumination but palm seed with high bulk density tends to deposit in the rumen. Chemical characteristics such as non-fibrous carbohydrates of lemon pulp and pistachio hull and crude protein of grape pomace, lerd and pulp of date were significantly different between samples. Results of physical characteristics, particle size separation and physical effective cell wall showed that rice straw provides adequate fiber in diet. Also, to some extent physical effective cell wall can be provided by grape pomace, kernel and lerd of date. The predictions of particle size separation and physical effective cell wall were found to compare reasonably well when new Pennsylvania sieves, compare to old ones, were used. By considering physical and chemical characteristics of above mentioned agricultural by-products date pulp with non-fibrous carbohydrate and high protein content and digestibility can be used in higher amounts in ruminant diets.

  7. Natural Bioactive Compounds from Winery By-Products as Health Promoters: A Review

    Directory of Open Access Journals (Sweden)

    Ana Teixeira

    2014-09-01

    Full Text Available The relevance of food composition for human health has increased consumers’ interest in the consumption of fruits and vegetables, as well as foods enriched in bioactive compounds and nutraceuticals. This fact has led to a growing attention of suppliers on reuse of agro-industrial wastes rich in healthy plant ingredients. On this matter, grape has been pointed out as a rich source of bioactive compounds. Currently, up to 210 million tons of grapes (Vitis vinifera L. are produced annually, being the 15% of the produced grapes addressed to the wine-making industry. This socio-economic activity generates a large amount of solid waste (up to 30%, w/w of the material used. Winery wastes include biodegradable solids namely stems, skins, and seeds. Bioactive compounds from winery by-products have disclosed interesting health promoting activities both in vitro and in vivo. This is a comprehensive review on the phytochemicals present in winery by-products, extraction techniques, industrial uses, and biological activities demonstrated by their bioactive compounds concerning potential for human health.

  8. Pressurized Hot Ethanol Extraction of Carotenoids from Carrot By-Products

    Directory of Open Access Journals (Sweden)

    Charlotta Turner

    2012-02-01

    Full Text Available Carotenoids are known for their antioxidant activity and health promoting effects. One of the richest sources of carotenoids are carrots. However, about 25% of the annual production is regarded as by-products due to strict market policies. The aim of this study was to extract carotenoids from those by-products. Conventional carotenoid extraction methods require the use of organic solvents, which are costly, environmentally hazardous, and require expensive disposal procedures. Pressurized liquid extraction (PLE utilizes conventional solvents at elevated temperatures and pressure, and it requires less solvent and shorter extraction times. The extraction solvent of choice in this study was ethanol, which is a solvent generally recognized as safe (GRAS. The extraction procedure was optimized by varying the extraction time (2–10 min and the temperature (60–180 °C. β-Carotene was used as an indicator for carotenoids content in the carrots. The results showed that time and temperatures of extraction have significant effect on the yield of carotenoids. Increasing the flush volume during extraction did not improve the extractability of carotenoids, indicating that the extraction method was mainly desorption/diffusion controlled. Use of a dispersing agent that absorbs the moisture content was important for the efficiency of extraction. Analysing the content of β-carotene at the different length of extraction cycles showed that about 80% was recovered after around 20 min of extraction.

  9. Natural Bioactive Compounds from Winery By-Products as Health Promoters: A Review

    Science.gov (United States)

    Teixeira, Ana; Baenas, Nieves; Dominguez-Perles, Raul; Barros, Ana; Rosa, Eduardo; Moreno, Diego A.; Garcia-Viguera, Cristina

    2014-01-01

    The relevance of food composition for human health has increased consumers’ interest in the consumption of fruits and vegetables, as well as foods enriched in bioactive compounds and nutraceuticals. This fact has led to a growing attention of suppliers on reuse of agro-industrial wastes rich in healthy plant ingredients. On this matter, grape has been pointed out as a rich source of bioactive compounds. Currently, up to 210 million tons of grapes (Vitis vinifera L.) are produced annually, being the 15% of the produced grapes addressed to the wine-making industry. This socio-economic activity generates a large amount of solid waste (up to 30%, w/w of the material used). Winery wastes include biodegradable solids namely stems, skins, and seeds. Bioactive compounds from winery by-products have disclosed interesting health promoting activities both in vitro and in vivo. This is a comprehensive review on the phytochemicals present in winery by-products, extraction techniques, industrial uses, and biological activities demonstrated by their bioactive compounds concerning potential for human health. PMID:25192288

  10. Analytical evaluation of natural radionuclides and their radioactive equilibrium in raw materials and by-products.

    Science.gov (United States)

    Ji, Young-Yong; Chung, Kun Ho; Lim, Jong-Myoung; Kim, Chang-Jong; Jang, Mee; Kang, Mun Ja; Park, Sang Tae

    2015-03-01

    An investigation into the distribution of natural radionuclides and radioactive secular equilibrium in raw materials and by-products in a domestic distribution was conducted to deduce the optimum conditions for the analytical evaluation of natural radionuclides for (238)U, (226)Ra, and (232)Th using a gamma-ray spectrometer and inductively coupled plasma mass spectrometer (ICP-MS). The range of the specific activities of natural radionuclides was first evaluated by analyzing (228)Ac and (214)Bi, which are (232)Th and (226)Ra indicators, respectively, in about 100 samples of raw materials and by-products through a gamma-ray spectrometer. From further experiments using several samples selected based on the results of the distribution of natural radionuclides, the validation of their analytical evaluations for the indirect measurements using a gamma-ray spectrometer and direct measurements using ICP-MS was assured by comparing their results. Chemically processed products from the raw materials, such as Zr sand and ceramic balls, were generally shown for the type of bead and particularly analyzed showing a definite disequilibrium with above a 50% difference between (238)U and (226)Ra in the uranium series and (232)Th and (228)Ra in the thorium series. Copyright © 2014 Elsevier Ltd. All rights reserved.

  11. New chlorinated amphetamine-type-stimulants disinfection-by-products formed during drinking water treatment.

    Science.gov (United States)

    Huerta-Fontela, Maria; Pineda, Oriol; Ventura, Francesc; Galceran, Maria Teresa

    2012-06-15

    Previous studies have demonstrated high removal rates of amphetamine-type-stimulants (ATSs) through conventional drinking water treatments; however the behaviour of these compounds through disinfection steps and their transformation into disinfection-by-products (DBPs) is still unknown. In this work, for the first time, the reactivity of some ATSs such as amphetamine, methamphetamine, 3,4-methylenedioxyamphetamine (MDA), 3,4-methylenedioxymethamphetamine (MDMA) and 3,4-methylenedioxyethylamphetamine (MDEA) with chlorine has been investigated under simulated and real drinking water treatment conditions in order to evaluate their ability to give rise to transformation products. Two new DBPs from these illicit drugs have been found. A common chlorinated-by-product (3-chlorobenzo)-1,3-dioxole, was identified for both MDA and MDEA while for MDMA, 3-chlorocatechol was found. The presence of these DBPs in water samples collected through drinking water treatment was studied in order to evaluate their formation under real conditions. Both compounds were generated through treatment from raw river water samples containing ATSs at concentration levels ranging from 1 to 15 ng/L for MDA and from 2.3 to 78 ng/L for MDMA. One of them, (3-chlorobenzo)-1,3-dioxole, found after the first chlorination step, was eliminated after ozone and GAC treatment while the MDMA DBP mainly generated after the postchlorination step, showed to be recalcitrant and it was found in final treated waters at concentrations ranging from 0.5 to 5.8 ng/L.

  12. Industrial vegetable oil by-products increase the ductility of polylactide

    Directory of Open Access Journals (Sweden)

    A. Ruellan

    2015-12-01

    Full Text Available The use of industrial by-products of the vegetable oil industry as ductility increasing additives of polylactide (PLA was investigated. Vegetable oil deodorization condensates were melt-blended by twin-screw extrusion up to a maximum inclusion quantity of 20 wt% without preliminary purification. Sample films were obtained by single screw cast extrusion. Compounded PLA films featured largely improved ductility in tensile testing with an elongation at break up to 180%. The glass transition temperature remained higher than room temperature. The native mixture of molecules, which composed the deodorization condensates, had superior performance compared to a synthetic mixture of main compounds. The investigation of the correlation between composition of the additives and the ductility of the PLA blends by Principal Component Analysis showed synergy in property improvement between fatty acids having a melting point below and beyond the room temperature. Furthermore, a compatibilizing effect of molecules present in the native mixture was evidenced. Oil deodorization condensates, which are a price competitive by-product of the vegetable oil industry, are therefore a very promising biobased and biodegradable additive for improving the ductility of PLA.

  13. Thin layer drying kinetics of by-products from olive oil processing.

    Science.gov (United States)

    Montero, Irene; Miranda, Teresa; Arranz, Jose Ignacio; Rojas, Carmen Victoria

    2011-01-01

    The thin-layer behavior of by-products from olive oil production was determined in a solar dryer in passive and active operation modes for a temperature range of 20-50 °C. The increase in the air temperature reduced the drying time of olive pomace, sludge and olive mill wastewater. Moisture ratio was analyzed to obtain effective diffusivity values, varying in the oil mill by-products from 9.136 × 10(-11) to 1.406 × 10(-9) m(2)/s in forced convection (m(a) = 0.22 kg/s), and from 9.296 × 10(-11) to 6.277 × 10(-10) m(2)/s in natural convection (m(a) = 0.042 kg/s). Diffusivity values at each temperature were obtained using the Fick's diffusion model and, regardless of the convection, they increased with the air temperature. The temperature dependence on the effective diffusivity was determined by an Arrhenius type relationship. The activation energies were found to be 38.64 kJ/mol, 30.44 kJ/mol and 47.64 kJ/mol for the olive pomace, the sludge and the olive mill wastewater in active mode, respectively, and 91.35 kJ/mol, 14.04 kJ/mol and 77.15 kJ/mol in natural mode, in that order.

  14. In vitro inhibitory effects of plant-derived by-products against Cryptosporidium parvum

    Directory of Open Access Journals (Sweden)

    Teichmann Klaus

    2016-01-01

    Full Text Available Disposal of organic plant wastes and by-products from the food or pharmaceutical industries usually involves high costs. In the present study, 42 samples derived from such by-products were screened in vitro against Cryptosporidium parvum, a protozoan parasite that may contaminate drinking water and cause diarrhoea. The novel bioassay was previously established in the microtitre plate format. Human ileocaecal adenocarcinoma (HCT-8 cell cultures were seeded with C. parvum oocysts and parasite development was monitored by an indirect fluorescent antibody technique (IFAT and microscopic assessment for clusters of secondary infection (CSI. Minimum inhibitory concentrations (MICs and potential detrimental effects on the host cells were determined. An ethanolic extract from olive (Olea europaea pomace, after oil pressing and phenol recovery, reproducibly inhibited C. parvum development (MIC = 250–500 μg mL−1, IC50 = 361 (279–438 μg mL−1, IC90 = 467 (398–615 μg mL−1. Accordingly, tyrosol, hydroxytyrosol, trans-coniferyl alcohol and oleuropein were selected as reference test compounds, but their contributions to the observed activity of the olive pomace extract were insignificant. The established test system proved to be a fast and efficient assay for identifying anti-cryptosporidial activities in biological waste material and comparison with selected reference compounds.

  15. In vitro inhibitory effects of plant-derived by-products against Cryptosporidium parvum

    Science.gov (United States)

    Teichmann, Klaus; Kuliberda, Maxime; Schatzmayr, Gerd; Pacher, Thomas; Zitterl-Eglseer, Karin; Joachim, Anja; Hadacek, Franz

    2016-01-01

    Disposal of organic plant wastes and by-products from the food or pharmaceutical industries usually involves high costs. In the present study, 42 samples derived from such by-products were screened in vitro against Cryptosporidium parvum, a protozoan parasite that may contaminate drinking water and cause diarrhoea. The novel bioassay was previously established in the microtitre plate format. Human ileocaecal adenocarcinoma (HCT-8) cell cultures were seeded with C. parvum oocysts and parasite development was monitored by an indirect fluorescent antibody technique (IFAT) and microscopic assessment for clusters of secondary infection (CSI). Minimum inhibitory concentrations (MICs) and potential detrimental effects on the host cells were determined. An ethanolic extract from olive (Olea europaea) pomace, after oil pressing and phenol recovery, reproducibly inhibited C. parvum development (MIC = 250–500 μg mL−1, IC50 = 361 (279–438) μg mL−1, IC90 = 467 (398–615) μg mL−1). Accordingly, tyrosol, hydroxytyrosol, trans-coniferyl alcohol and oleuropein were selected as reference test compounds, but their contributions to the observed activity of the olive pomace extract were insignificant. The established test system proved to be a fast and efficient assay for identifying anti-cryptosporidial activities in biological waste material and comparison with selected reference compounds. PMID:27627637

  16. PIXE characterization of by-products resulting from the zinc recycling of industrial cemented carbides

    Science.gov (United States)

    Freemantle, C. S.; Sacks, N.; Topic, M.; Pineda-Vargas, C. A.

    2015-11-01

    By-product materials of the widely used zinc recycling process of cemented carbides have been studied. Scanning electron microscopy and micro-PIXE techniques have identified elemental concentrations, distributions and purity of by-product materials from an industrial zinc recycling plant. Cobalt surface enrichment, lamellar microstructures of varying composition, including alternating tungsten carbide (WC) grains and globular cobalt, and regions of excess zinc contamination were found in materials with incomplete zinc penetration. Liquid Co-Zn formation occurred above 72 wt.% Zn at the furnace temperature of 930 °C, and was extracted towards the surface of poorly zinc infiltrated material, primarily by the vacuum used for zinc distillation. Surface enrichment was not observed in material that was zinc infiltrated to the sample center, which was more friable and exhibited more homogeneous porosity and elemental concentrations. The result of incomplete zinc infiltration was an enriched surface zone of up to 60 wt.% Co, compared to an original sample composition of ∼10-15 wt.% Co. The impact on resulting powders could be higher or inhomogeneous cobalt content, as well as unacceptably high zinc concentrations. PIXE has proven it can be a powerful technique for solving industrial problems in the cemented carbide cutting tool industry, by identifying trace elements and their locations (such as Zn to 0.1 wt.% accuracy), as well as the distribution of major elements within WC-Co materials.

  17. Solar photocatalytic treatment of landfill leachate using a solid mineral by-product as a catalyst.

    Science.gov (United States)

    Poblete, Rodrigo; Prieto-Rodríguez, Lucia; Oller, Isabel; Maldonado, Manuel I; Malato, Sixto; Otal, Emilia; Vilches, Luis F; Fernández-Pereira, Constantino

    2012-08-01

    The treatment of municipal solid waste landfill leachate in a pilot plant made up of solar compound parabolic collectors, using a solid industrial titanium by-product (WTiO(2)) containing TiO(2) and Fe(III) as a photocatalyst, was investigated. In the study evidence was found showing that the degradation performed with WTiO(2) was mainly due to the Fe provided by this by-product, instead of TiO(2). However, although TiO(2) had very little effect by itself, a synergistic effect was observed between Fe and TiO(2). The application of WTiO(2), which produced coupled photo-Fenton and heterogeneous catalysis reactions, achieved a surprisingly high depuration level (86% of COD removal), higher than that reached by photo-Fenton using commercial FeSO(4) (43%) in the same conditions. After the oxidation process the biodegradability and toxicity of the landfill leachate were studied. The results showed that the leachate biodegradability was substantially increased, at least in the first stages of the process, and again that WTiO(2) was more efficient than FeSO(4) in terms of increasing biodegradability. Copyright © 2012 Elsevier Ltd. All rights reserved.

  18. Gas Hydrate Storage of Natural Gas

    Energy Technology Data Exchange (ETDEWEB)

    Rudy Rogers; John Etheridge

    2006-03-31

    Environmental and economic benefits could accrue from a safe, above-ground, natural-gas storage process allowing electric power plants to utilize natural gas for peak load demands; numerous other applications of a gas storage process exist. A laboratory study conducted in 1999 to determine the feasibility of a gas-hydrates storage process looked promising. The subsequent scale-up of the process was designed to preserve important features of the laboratory apparatus: (1) symmetry of hydrate accumulation, (2) favorable surface area to volume ratio, (3) heat exchanger surfaces serving as hydrate adsorption surfaces, (4) refrigeration system to remove heat liberated from bulk hydrate formation, (5) rapid hydrate formation in a non-stirred system, (6) hydrate self-packing, and (7) heat-exchanger/adsorption plates serving dual purposes to add or extract energy for hydrate formation or decomposition. The hydrate formation/storage/decomposition Proof-of-Concept (POC) pressure vessel and supporting equipment were designed, constructed, and tested. This final report details the design of the scaled POC gas-hydrate storage process, some comments on its fabrication and installation, checkout of the equipment, procedures for conducting the experimental tests, and the test results. The design, construction, and installation of the equipment were on budget target, as was the tests that were subsequently conducted. The budget proposed was met. The primary goal of storing 5000-scf of natural gas in the gas hydrates was exceeded in the final test, as 5289-scf of gas storage was achieved in 54.33 hours. After this 54.33-hour period, as pressure in the formation vessel declined, additional gas went into the hydrates until equilibrium pressure/temperature was reached, so that ultimately more than the 5289-scf storage was achieved. The time required to store the 5000-scf (48.1 hours of operating time) was longer than designed. The lower gas hydrate formation rate is attributed to a

  19. GCMS and FTIR studies of by-product inhibited growth and the rate-limiting step in TEOS-based SiO{sub 2} CVD

    Energy Technology Data Exchange (ETDEWEB)

    Bartram, M.E.; Moffat, H.K. [Sandia National Labs., Albuquerque, NM (United States). Chemical Processing Science Dept.

    1995-04-01

    To improve process reliability and deposition methods, it is essential to identify the rate-limiting step in TEOS-based SiO{sub 2} CVD and its dependence on process conditions. For this purpose, experiments designed to evaluate by-product inhibition effects and to identify the rate-limiting step in TEOS decomposition have been carried out in a research reactor using GCMS and FTIR. By repetitively sampling a series of reactions in which TEOS was first mixed with ethylene, ethanol, and water in the gas-phase, GCMS was used to show clearly that these reaction by-products do not inhibit the heterogeneous reaction step on SiO{sub 2} at 1,000K. FTIR was used to determine that ethoxy groups from TEOS dissociative chemisorption have a significant lifetime on the SiO{sub 2} surface at CVD temperatures and have an activation energy for decomposition of 16kcal/mol{+-}4kcal/mol. This is much higher than the activation energy of 6 kcal/mol reported for the initial chemisorption step and is near the 22 kcal/mol reported for the overall activation energy for SiO{sub 2} deposition in a cold-wall reactor. These results suggest that, whether or not surface ethoxy groups inhibit TEOS reactions, their decomposition may be directly related to the rate-limiting step in SiO{sub 2} deposition.

  20. Is methane a new therapeutic gas?

    Directory of Open Access Journals (Sweden)

    Liu Wenwu

    2012-09-01

    Full Text Available Abstract Background Methane is an attractive fuel. Biologically, methanogens in the colon can use carbon dioxide and hydrogen to produce methane as a by-product. It was previously considered that methane is not utilized by humans. However, in a recent study, results demonstrated that methane could exert anti-inflammatory effects in a dog small intestinal ischemia-reperfusion model. Point of view Actually, the bioactivity of methane has been investigated in gastrointestinal diseases, but the exact mechanism underlying the anti-inflammatory effects is required to be further elucidated. Methane can cross the membrane and is easy to collect due to its abundance in natural gas. Although methane is flammable, saline rich in methane can be prepared for clinical use. These seem to be good news in application of methane as a therapeutic gas. Conclusion Several problems should be resolved before its wide application in clinical practice.

  1. Gas utilisation developments

    Energy Technology Data Exchange (ETDEWEB)

    Kelsall, G.J.; Fantom, I.R.; Laughlin, K.M.; King, R.J.; Watkins, C.J.; Williams, J.D.H.; Blenkin, P. [British Coal Corporation (United Kingdom). Coal Technology Development Division

    1995-08-01

    Advanced coal based power generation systems such as the Air Blown Gasification Cycle (ABGC), formerly known as the CTDD Topping Cycle, offer the potential for high efficiency electricity generation with low environmental impact. An important component of the ABGC development programme has been the determination of alkali metal compounds, dust and other trace contaminant species concentrations that would be contained in the combusted fuel gas presented to the gas turbine. These species are an important factor in the prediction of gas turbine component lifetimes when firing coal derived fuel gas. A project supported under the UK Department of Trade and Industry`s Coal Research and Development programme and the European Communities Commission THERMIE programme, was therefore devised to measure these contaminant species in a purpose built gas cleaning and combustion facility (Gas Utilisation Facility). This facility contained gas cleaning and combustion sytems representative of those that would be used in an ABGC utility application. The objective of this project was therefore to provide data on the level of certain contaminants present in the turbine expansion gas after passing through a low calorific value fuel gas, gas turbine combustor. This fuel gas was produced by the CTDD spouted fluidised bed gasifier and cleaned by filtration at up to 600{degree}C in the purpose built Gas Utilisation Facility. The data has been related to an existing materials test programme associated with the Grimethorpe Topping Cycle Project, which had the objective of predicting gas turbine component lifetimes in utility gas turbine machines. 22 refs., 12 figs., 8 tabs.

  2. Characterization and value-added utilization of proteins extracted from the by-products from catfish fillet processing plant

    Science.gov (United States)

    Channel catfish farming is the most important warm water aquaculture in the Southeastern United States. The by-products, including heads, skin, bone frame and viscera, account for 55-65% of the whole fish mass after fillet processing. The by-products contain 35% of protein on a dry basis, and may be...

  3. Organic amendments derived from a pharmaceutical by-product: benefits and risks

    Science.gov (United States)

    Gigliotti, Giovanni; Cucina, Mirko; Zadra, Claudia; Pezzolla, Daniela; Sordi, Simone; Carla Marcotullio, Maria; Curini, Massimo

    2015-04-01

    The application of organic amendments to soils, such as sewage sludge, anaerobic digestate and compost is considered a tool for improving soil fertility and enhancing C stocks. The addition of these different organic materials allows a good supply of nutrients for plants but also contributes to C sequestration, affects the microbial activity and the transformation of soil organic matter (SOM). Moreover, the addition of organic amendment has gained importance as a source of CO2 emissions and then as a cause of the "Global Warming". Therefore, it is important to investigate the factors controlling the SOM mineralization in order to improve the soil C sequestration and decreasing at the same time CO2 emissions. Moreover, the quality of organic matter added to the soil will play an important role in these dynamics. Based on these considerations, the aim of the present work was to investigate the effect of the application to an arable soil of different organic materials derived from a pharmaceutical by-product which results from the fermentative biomass after the separation of the lipopolypeptidic antibiotic produced. A microcosm soil experiment was carried out using three different materials: a sewage sludge derived from the stabilization process of the by-product, a digestate obtained from the anaerobic treatment of the by-product and a compost produced by the aerobic treatment of the same digestate. To achieve this aim, the short-term variations of CO2 emissions, enzymatic soil activities (Dehydrogenase total activity and Fluoresceine diacetate hydrolysis), SOM quantity and quality were studied. In addition, process-related residues of antibiotic and decanoic acid (a precursor added during the fermentation) were analyzed on the organic materials to assess their possible presence. Through these analyses it was possible to state that the application to the soil of sewage sludge and anaerobic digestate may have a strong influence on the short-term variations of the

  4. Nutritive value and nutrient digestibility of ensiled mango by-products

    Directory of Open Access Journals (Sweden)

    Sompong Sruamsiri

    2009-10-01

    Full Text Available Mango canning by-products (seed and peel together with ensiled mango peel were subjected to analysis of dry matter (DM, ash, crude protein (CP, crude fibre (CF, ether extract (EE, nitrogen-free extract (NFE, gross energy (GE, neutral detergent fibre (NDF and acid detergent fibre (ADF. In vitro digestibility of DM (IVDMD, ADF (IVADFD and NDF (IVNDFD was determined after digesting the by-products in buffered rumen fluid for 24 or 48 h in an incubator. CP content in peel, seed and peel silage is 4.68, 4.19 and 5.27% respectively. As expected, mango seed has a higher fibre content than mango peel and peel silage as indicated by NDF (53.01 vs 25.87 and 27.56% respectively and ADF (31.02 vs 19.14 and 17.68% respectively. However, mango seed also has greater GE than mango peel and peel silage (4,070 vs 3,827 and 3,984 kcal/g DM respectively, probably due partly to its high fat content.Four head of male native cattle were used to determine nutrient digestibility of ensiled mango by-products by randomly allowing them to receive ensiled mango peel with rice straw (EMPR and different levels of Leucaena leaves. Treatments consisted of: 1 ensiled mango peel + rice straw (90:10; 2 ensiled mango peel + rice straw + Leucaena leaves (85:10:5; 3 ensiled mango peel + rice straw + Leucaena leaves (80:10:10; and 4 ensiled mango peel + rice straw + Leucaena leaves (75:10:15. Addition of Leucaena leaves to silage increased apparent digestibility of DM (53.84, 55.43, 59.04 and 58.69% for the four formulations above respectively, probably because of increasing amounts of CP from Leucaena leaves, resulting in greater digestibility of NDF (39.11, 44.47, 47.12 and 43.32% for the four formulations above respectively. Total digestible nutrients (TDN and digestible energy (DE showed the same trends as apparent digestibility of DM.

  5. Characterization of Animal By-Product Hydrolysates to Be Used as Healthy and Bioactive Ingredients in Food

    DEFF Research Database (Denmark)

    Damgaard, Trine Desiree

    The world meat production and consumption has increased rapidly over the last couple of decades, due to population and income growth. In contrast to the meat, the consumption of animal by-products has been declining, leaving large amounts of by-products underutilized. As many by-products are highly...... and their “meat factor” effect, i.e. their ability to enhance in vitro iron availability. Hydrolysates of different animal by-products displayed antioxidant capacities as observed by several assays intended to test different antioxidant mechanisms. The radical scavenging capacity of the hydrolysates was found...... with a higher dose. These results are interesting in regard to optimizing the value of animal by-products by converting such tissues into bioactive hydrolysates for potential use as natural ingredients in functional foods....

  6. Inventory non-conventional gas

    Energy Technology Data Exchange (ETDEWEB)

    Muntendam-Bos, A.G.; Wassing, B.B.T.; Ter Heege, J.H.; Van Bergen, F.; Schavemaker, Y.A.; Van Gessel, S.F.; De Jong, M.L.; Nelskamp, S.; Van Thienen-Visser, K.; Guasti, E.; Van den Belt; Marges, V.C. [TNO Built Environment and Geosciences, Utrecht (Netherlands)

    2009-10-15

    This report describes the results of the inventory for each non-conventional gas resource expected to be present in the Netherlands, which are: Tight Gas, Shallow gas, Coal bed Methane (CBM), Shale gas, Basin Centered Gas, Aquifer Gas and Stratigraphic traps.

  7. Nutritional and phytochemical composition of Annona cherimola Mill. fruits and by-products: Potential health benefits.

    Science.gov (United States)

    Albuquerque, Tânia Gonçalves; Santos, Filipa; Sanches-Silva, Ana; Beatriz Oliveira, M; Bento, Ana Cristina; Costa, Helena S

    2016-02-15

    Annona cherimola Mill., commonly known as cherimoya, is a tropical fruit well known due to its tasty flavour. In the present study the antioxidant activity of pulp, peel and seeds of four cultivars from A. cherimola Mill. from Madeira Island (Madeira, Funchal, Perry Vidal and Mateus II) was analysed. Moreover, nutritional composition (proximates and vitamins) and bioactive compounds content were determined. The peel of Madeira cultivar showed the highest antioxidant capacity, with an EC50 of 0.97mg/mL, and total flavonoids (44.7 epicatechin equivalents/100g). The most abundant carotenoid was lutein, with values ranging from 129 to 232μg/100g. The highest l-ascorbic acid content (4.41mg/100g) was found in the peel of Perry Vidal cultivar. These results highlight A. cherimola Mill. antioxidant properties, especially in its by-products and encourage their application in cosmetic, pharmaceutical and food processing industries, as added value natural extracts.

  8. Influence of fermentation by-products on the purification of ethanol from water using pervaporation.

    Science.gov (United States)

    Chovau, S; Gaykawad, S; Straathof, A J J; Van der Bruggen, B

    2011-01-01

    Pervaporation is claimed to be a promising separation technique for the purification of ethanol from fermentation broths during bio-ethanol production. In this study, influence of fermentation by-products on the purification of ethanol from water during hydrophobic pervaporation was investigated. Sugars and salts were found to increase the membrane performance. Reason for this was a change in vapor/liquid equilibrium. 2,3-butanediol decreased the ethanol flux and selectivity factor, while glycerol exhibited no effect. This was explained by a strong sorption of butanediol into PDMS and no sorption of glycerol. Due to the presence of carboxylic acids, hydrophobicity degree of the Pervap 4060 membrane decreased, which resulted in an irreversible increase in water flux and decrease in separation performance. These observations suggested the presence of silicalite-based fillers in the membrane. When the pH was raised to a value above the dissociation constant, no changes in hydrophobicity degree and membrane performance were found.

  9. Molecular structure of a new chlorinated disinfection by-product in drinking water

    Science.gov (United States)

    Gong, Huijuan; Wang, Huaqin; You, Zhen; Zou, Huixian; Shen, Xing

    2005-06-01

    A new found chlorinated disinfection by-product (DBP) in drinking water was isolated and characterized by MS, FTIR, 1H and 13C NMR spectroscopy. Single crystal X-ray diffraction method was also carried out to determinate the exact structure of the compound. The crystal is of monoclinic, and space group P2 1/ m with a=7.8800(16), b=6.7950(14), c=8.8350(18) Å, β=115.02(3)°, V=428.67(15) Å 3, Z=4, Dc=1.778 g/cm 3, μ=1.028 mm -1 and F(000)=228, R=0.0510 and wR=0.2205 for 982 unique reflections with 918 observed ones [ I>2 σ( I)]. The results confirmed the structure of this compound. It was finally identified as 2,2,4-trichloro-5-methoxy-cyclopent-4-ene-1,3-dione (TCMCD).

  10. The Possibilities of Using By-Products from Olive Oil in Ruminant Feeding

    Directory of Open Access Journals (Sweden)

    Mustafa Boga

    2014-03-01

    Full Text Available Nowadays, meeting adequately nutrient requirements of animal is a major problem due to cost of feed. This situation results in the feed manufacturers to search alternative feed source in order to provide more economical feeding in animal nutrition. In Turkey known as a paradise of olive, a number of substances were discharged to the environment during olive processing. After pressing of olive, the olive remains such as olive cake and black water cause off-odour, groundwater pollution, visual pollution and formation of a fly in environment. Among these by-products, olive cake has been extensively used as fuel. However, olive cake and black water can be used as alternative animal feed due to their high nutrient contents. In this review, the importance and use of the olive cake and black water in animal nutrition will be discussed.

  11. Alien Biochemistries and Their Metabolic By-Products. Lessons from Synthetic Biology

    Science.gov (United States)

    Benner, S.

    2014-03-01

    While the metabolisms of terran organisms are accessible for study and their byproducts are, for the most part, well known, the "diversity" of terran biology arises (as far as we know) from a single common ancestor, represents only a small fraction of possible chemical difersity, and may reflect only a fraction of the possible chemical diversity that might support Darwinian evolution [1]. This talk will consider laboratory experiments on origins [2] and synthetic biology [3], asking how they might inform us about alternative biochemistries, and whether we have any chance of observing remotely their by-products, recognizing the uncertanties in both our models for "weird life" and our models of abiotic processes in incompletely defined planetary environments.

  12. Recent Advances in Phospholipids from Colostrum, Milk and Dairy By-Products

    Directory of Open Access Journals (Sweden)

    Vito Verardo

    2017-01-01

    Full Text Available Milk is one of the most important foods for mammals, because it is the first form of feed providing energy, nutrients and immunological factors. In the last few years, milk lipids have attracted the attention of researchers due to the presence of several bioactive components in the lipid fraction. The lipid fraction of milk and dairy products contains several components of nutritional significance, such as ω-3 and ω-6 polyunsaturated fatty acids, CLA, short chain fatty acids, gangliosides and phospholipids. Prospective cohort evidence has shown that phospholipids play an important role in the human diet and reinforce the possible relationship between their consumption and prevention of several chronic diseases. Because of these potential benefits of phospholipids in the human diet, this review is focused on the recent advances in phospholipids from colostrum, milk and dairy by-products. Phospholipid composition, its main determination methods and the health activities of these compounds will be addressed.

  13. Recent Advances in Phospholipids from Colostrum, Milk and Dairy By-Products

    Science.gov (United States)

    Verardo, Vito; Gómez-Caravaca, Ana Maria; Arráez-Román, David; Hettinga, Kasper

    2017-01-01

    Milk is one of the most important foods for mammals, because it is the first form of feed providing energy, nutrients and immunological factors. In the last few years, milk lipids have attracted the attention of researchers due to the presence of several bioactive components in the lipid fraction. The lipid fraction of milk and dairy products contains several components of nutritional significance, such as ω-3 and ω-6 polyunsaturated fatty acids, CLA, short chain fatty acids, gangliosides and phospholipids. Prospective cohort evidence has shown that phospholipids play an important role in the human diet and reinforce the possible relationship between their consumption and prevention of several chronic diseases. Because of these potential benefits of phospholipids in the human diet, this review is focused on the recent advances in phospholipids from colostrum, milk and dairy by-products. Phospholipid composition, its main determination methods and the health activities of these compounds will be addressed. PMID:28106745

  14. Cellulose Nanocrystals Obtained from Rice By-Products and Their Binding Potential to Metallic Ions

    Directory of Open Access Journals (Sweden)

    Vanessa L. Albernaz

    2015-01-01

    Full Text Available The present study aimed to develop and optimize a method to obtain cellulose nanocrystals from the agricultural by-products rice husk and straw and to evaluate their electrostructural modifications in the presence of metallic ions. First, different particle formation conditions and routes were tested and analyzed by spectrophotometry, dynamic light scattering (DLS, and Zeta potential measurements. Then, electrostructural effects of ions Na(I, Cd(II, and Al(III on the optimized nanoparticles were analyzed by atomic force microscopy (AFM, scanning electron microscopy (SEM, and electrical conductivity (EC assessments. The produced cellulose nanocrystals adopted a rod-like shape. AFM height distribution and EC data indicated that the nanocrystals have more affinity in binding with Na(I > Al(III > Cd(II. These data suggest that the use of these cellulose nanocrystals in the bioremediation field is promising, both in metal sorption from wastewater and as an alternative for water desalination.

  15. Early age shrinkage pattern of concrete on replacement of fine aggregate with industrial by-product

    Directory of Open Access Journals (Sweden)

    R.K. Mishra

    2016-10-01

    Full Text Available This is an experimental work carried out to investigate early age shrinkage pattern of concrete, prepared, on 50% replacement of industrial by-product (like pond ash and granulated blast furnace slag as fine aggregate using OPC, PPC and PSC as a binder. This is to observe the effect of pond ash and slag as they are having some cementitious properties and effect of cement type is also discussed. All the mixes were prepared keeping in view of pumpable concrete without any super plasticizers. Higher shrinkage value indicates the presence of more bleed water or internal moisture. It is concluded that slag is the best option for fine aggregate replacement for concrete making and durable structure.

  16. Lecithin: a by-product of biodiesel production and a source of choline for dairy cows

    Directory of Open Access Journals (Sweden)

    Igino Andrighetto

    2012-04-01

    Full Text Available The aim of the present study was to compare the effects of soy lecithins (L, a by-product of the biodiesel production process, and choline chloride microencapsulated with hydrogenated vegetable oils (C on dry matter intake, milk yield,  milk quality traits, milk choline and haematological profile of dairy cows. A total of 12 mid-lactating Holstein Friesian cows were assigned to one of two experimental groups and fed according to cross-over design (2 diets x 2 periods. Diets were isoenergetic, isofibrous and isonitrogenous and had the same content of choline. Dry matter intake was not affected by the diet, but L led to lower milk choline (P

  17. Novel process to recover by-products from the pickling baths of stainless steel

    Energy Technology Data Exchange (ETDEWEB)

    Frias, C.; Negro, C.; Formoso, A.; Van Erkel, J.; Maas, W.; Kemppainen, J.; Mancia, F. [Tecnicas Reunidas, S.A., Madrid (Spain)

    2001-07-01

    Development of an integrated process (the PIBARE process) which is able to recover and recycle free and complex acids back to the pickling tank is described. The recovery of these by-products proceeds while the metals are recovered in the form of electrodeposited metal alloy and are internally recycled to the stainless steel manufacturing process. Virtually no solid residue or liquid is produced in the process. Results after three years of investigation are very promising, having achieved all stated objectives at least on the laboratory scale. The new technology promises significant economic and environmental benefits over other existing technologies for the treatment of spent baths. However, since the benefits have not been confirmed at the pilot scale, commercial application would require additional research, including finding more efficient and more selective anionic membranes. 3 tabs., 6 figs.

  18. Development of a database management system for Coal Combustion By-Products (CCBs)

    Energy Technology Data Exchange (ETDEWEB)

    O`Leary, E.M.; Peck, W.D.; Pflughoeft-Hassett, D.F. [and others

    1997-06-01

    Coal combustion by-products (CCBs) are produced in high volumes worldwide. Utilization of these materials is economically and environmentally advantageous and is expected to increase as disposal costs increase. The American Coal Ash Association (ACAA) is developing a database to contain characterization and utilization information on CCBs. This database will provide information for use by managers, marketers, operations personnel, and researchers that will aid in their decision making and long-term planning for issues related to CCBs. The comprehensive nature of the database and the interactive user application will enable ACAA members to efficiently and economically access a wealth of data on CCBs and will promote the technically sound, environmentally safe, and commercially competitive use of CCBs.

  19. Reducing the formation of disinfection by-products by pre-ozonation.

    Science.gov (United States)

    Chang, Cheng-Nan; Ma, Ying-Shih; Zing, Fang-Fong

    2002-01-01

    The objective of this study is to apply the pre-ozonation process to reduce the formation of disinfection by-products (DBPs). The raw water sample, collected from the Te-Chi Reservoir in central Taiwan, has been polluted by fertilizer. Three types of resins were used to isolate the natural organic matter into seven types of organic fractions. The pre-ozonation was used to oxidize each organic fraction to study the reduction of DBPs of each fraction. Experimental results indicated that the pre-ozonation could reduce the concentration of dissolved organic carbon resulting in the reduction of DBP formation. With the pre-ozonation, 9-54% of DOC and more than 40% of DBPs were reduced. With the analysis of UV adsorption and Fourier transform infrared spectrometer (FTIR), the reduction of A254 and unsaturated functional groups such as aromatic ring and C=C bond containing in the water sample is the major reaction mechanism.

  20. Chemical and functional properties of fibre concentrates obtained from by-products of coconut kernel.

    Science.gov (United States)

    Yalegama, L L W C; Nedra Karunaratne, D; Sivakanesan, Ramiah; Jayasekara, Chitrangani

    2013-11-01

    The coconut kernel residues obtained after extraction of coconut milk (MR) and virgin coconut oil (VOR) were analysed for their potential as dietary fibres. VOR was defatted and treated chemically using three solvent systems to isolate coconut cell wall polysaccharides (CCWP). Nutritional composition of VOR, MR and CCWPs indicated that crude fibre, neutral detergent fibre, acid detergent fibre and hemicelluloses contents were higher in CCWPs than in VOR and MR. MR contained a notably higher content of fat than VOR and CCWPs. The oil holding capacity, water holding capacity and swelling capacity were also higher in CCWPs than in VOR and MR. All the isolates and MR and VOR had high metal binding capacities. The CCWPs when compared with commercially available fibre isolates, indicated improved dietary fibre properties. These results show that chemical treatment of coconut kernel by-products can enhance the performance of dietary fibre to yield a better product.

  1. Flour production from shrimp by-products and sensory evaluation of flour-based products

    Directory of Open Access Journals (Sweden)

    Thiago Mendes Fernandes

    2013-08-01

    Full Text Available The objective of this work was to evaluate the production of flour using by-products (cephalothorax obtained from the shrimp (Litopenaeus vannamei industry, and to perform a sensory analysis of shrimp flour-based products. Physicochemical and microbiological analyses on fresh cephalothorax and on manufactured flour were performed, as well as the determination of cholesterol content of this flour, and the sensorial evaluation of soup and pastry made with this flour. By the microbiological analyses, no pathogenic microorganism was detected in the samples. Physicochemical analyses of flour showed high levels of protein (50.05% and minerals (20.97%. Shrimp cephalothorax flour showed high levels of cholesterol. The sensory evaluation indicated a good acceptance of the products, with satisfactory acceptability index (81% for soup, and 83% for pastry, which indicates that shrimp cephalothorax in the form of flour has a potential for developing new products.

  2. Peptidoglycan from fermentation by-product triggers defense responses in grapevine.

    Directory of Open Access Journals (Sweden)

    Yang Chen

    Full Text Available Plants are constantly under attack from a variety of microorganisms, and rely on a series of complex detection and response systems to protect themselves from infection. Here, we found that a by-product of glutamate fermentation triggered defense responses in grapevine, increasing the expression of defense response genes in cultured cells, foliar chitinase activity, and resistance to infection by downy mildew in leaf explants. To identify the molecule that triggered this innate immunity, we fractionated and purified candidates extracted from Corynebacterium glutamicum, a bacterium used in the production of amino acids by fermentation. Using hydrolysis by lysozyme, a silkworm larva plasma detection system, and gel filtration analysis, we identified peptidoglycan as inducing the defense responses. Peptidoglycans of Escherichia coli, Bacillus subtilis, and Staphylococcus aureus also generated similar defensive responses.

  3. EFFECT OF PHYTATECONTENTS OF CEREAL BY-PRODUCTS ON BIOAVAILABILITY OF TOT AL PHOSPHORUS IN POULTRY

    Directory of Open Access Journals (Sweden)

    Ishtiaq Ahmad

    2002-04-01

    Full Text Available Four cereal by-products were examined for their total and phytate phosphorus contents. Feeding trial for bioavailability was conducted on 18 weeks old cockerels of White Leg Horn breed which were starved for24 hours and were forced-fed 30 grams of finely ground single feedstuff and droppings were collected at pre-determined time intervals. The bioavailability of total phosphorus for wheat bran, rice polishing, wheat middling and gram kara was 37.11 , 15.37,61.32 and 62.64%, respectively while phytate phosphorus contents were 0.66, 1.16, 0.24 and 0.17%, respectively. The bioavailability of total phosphorus was negatively correlated with the phytate phosphorus contents of these feed stuffs (P< 0.01 .

  4. Pseudo-Anosov Mapping Classes and Their Representations by Products of Two Dehn Twists

    Institute of Scientific and Technical Information of China (English)

    Chaohui ZHANG

    2009-01-01

    Let S be a Riemann surface of analytically finite type (p, n) with 3p-3+n > 0. Let a ∈ (~S) and S = (~S) - {a}. In this article, the author studies those pseudo-Anosov maps on S that are isotopic to the identity on S and can be represented by products of Dehn twists. It is also proved that for any pseudo-Anosov map f of S isotopic to the identity on S, there are infinitely many pseudo-Anosov maps F on S - {b} = (~S) - {a, b}, where b is a point on S, such that F is isotopic to f on S as b is filled in.

  5. Removal of disinfection by-product formation potentials by biologically assisted GAC treatment

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    The object of this paper is to evaluate the removal of disinfection by-products formation potential by artificially intensified biological activated carbon(BAC) process which is developed on the basis of traditional ozone granular activated carbon (GAC). The results show that 23.1% of trihalomethane formation potential (THMFP) and 68% of haloacetic acid formation potential (HAAFP) can be removed by BAC,respectively. Under the same conditions, the removal rates of the same substances were 12.2% and 13-25 % respectively only by GAC process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. BAC process has some advantages such as long backwashing cycle time, low backwashing intensity and prolonged activated carbon lifetime, etc.

  6. Local agro-industrial by-products with potential use in Ghanaian aquaculture: a review

    DEFF Research Database (Denmark)

    Obirikorang, Kwasi Adu; Amisah, Stephen; Fialor, Simon Cudjoe

    2015-01-01

    , demonstrating that the sector has not yet reached its full potential in terms of production volumes and efficiency. Fish meal is available in limited quantities and is prohibitively expensive in Ghana, making it essential to develop suitable complete and supplementary diets using low-cost and locally available...... plant by-products for use in fish grow-out facilities, particularly in tilapia production, which accounts for over 80 % of aquaculture production. This review thus identifies local agro-industrial byproducts with potential use in fish feeds based on their nutritional composition, total annual production...... potentials as alternative aquafeed protein sources because of their abundance, very affordable prices and healthy nutritional profiles for fish growth. Although this review focuses on Ghana, it can also be of direct benefit to fish farmers, feed manufacturers, researchers and the policy-makers in other...

  7. Characterization and transformation of an industrial by-product (coated paper sludge into a pozzolanic material

    Directory of Open Access Journals (Sweden)

    San José, J. T.

    2007-03-01

    Full Text Available The effective re-use of industrial by-products calls for an understanding of their chemical, mineralogical and physical characteristics. The by-product used in this study was coated paper industry sludge from a plant whose sole prime material is recycled paper. Due to its high organic and calcium carbonate content and the presence of several clayey materials such as talc and kaolinite, incineration conditions had a significant effect on the mineralogy of such sludge. The present study examined the impact of such conditions on the pozzolanic properties of coated paper sludge. Several temperature intervals ranging from 600 to 750 ºC were studied to determine the conditions yielding the most promising pozzolanic properties.La necesidad de dar un correcto uso a los subproductos industriales requiere del conocimiento de sus características, tanto desde un punto de vista químico como mineralógico y físico. El subproducto utilizado para esta investigación es un lodo de papel estucado procedente de la industria papelera, la cual usa como materias primas un 100% de material reciclado. Debido al alto contenido de materia orgánica y carbonato cálcico y a la presencia de diferentes materiales arcillosos, como el talco y la caolinita, las condiciones de calcinación presentan un papel principal en la mineralogía de este lodo. En el actual trabajo se considera el papel que juegan estas condiciones, tiempo y permanencia en horno, en las propiedades puzolánicas del lodo de papel estucado como material cementante. Por esta razón, se estudiaron diferentes intervalos de temperatura, entre 600 y 750 ºC y 2 horas de permanencia en horno con el objetivo de obtener las mejores propiedades puzolánicas.

  8. Enrichment of functional properties of ice cream with pomegranate by-products.

    Science.gov (United States)

    Çam, Mustafa; Erdoğan, Fatma; Aslan, Duygu; Dinç, Merve

    2013-10-01

    Pomegranate peel rich in phenolics, and pomegranate seed which contain a conjugated fatty acid namely punicic acid in lipid fraction remain as by-products after processing the fruit into juice. Ice cream is poor in polyunsaturated fatty acids and phenolics, therefore, this study was conducted to improve the functional properties of ice cream by incorporating pomegranate peel phenolics and pomegranate seed oil. Incorporation of the peel phenolics into ice cream at the levels of 0.1% and 0.4% (w/w) resulted in significant changes in the pH, total acidity, and color of the samples. The most prominent outcomes of phenolic incorporation were sharp improvements in antioxidant and antidiabetic activities as well as the phenolic content of ice creams. Replacement of pomegranate seed oil by milk fat at the levels of 2.0% and 4.0% (w/w) increased the conjugated fatty acid content. However, perception of oxidized flavor increased with the additional seed oil. When one considers the functional and nutritional improvements in the enrichment of the ice cream together with overall acceptability results of the sensory analysis, then it follows from this study that ice creams enriched with pomegranate peel phenolics up to 0.4% (w/w) and pomegranate seed oil up to 2.0% (w/w) could be introduced to markets as functional ice cream. Enrichment of ice creams with pomegranate by-products might provide consumers health benefits with striking functional properties of punicalagins in pomegranate peel, and punicic acid in pomegranate seed oil.

  9. Opportunities, perspectives and limits in lactic acid production from waste and industrial by-products

    Directory of Open Access Journals (Sweden)

    Mladenović Dragana D.

    2016-01-01

    Full Text Available In line with the goals of sustainable development and environmental protection today great attention is directed towards new technologies for waste and industrial by-products utilization. Waste products represent potentially good raw material for production other valuable products, such as bioethanol, biogas, biodiesel, organic acids, enzymes, microbial biomass, etc. Since the first industrial production to the present, lactic acid has found wide application in food, cosmetic, pharmaceutical and chemical industries. In recent years, the demand for lactic acid has been increasing considerably owing to its potential use as a monomer for the production of poly-lactic acid (PLA polymers which are biodegradable and biocompatible with wide applications. Waste and industrial by-products such are whey, molasses, stillage, waste starch and lignocellulosic materials are a good source of fermentable sugars and many other substances of great importance for the growth of microorganisms, such as proteins, minerals and vitamins. Utilization of waste products for production of lactic acid could help to reduce the total cost of lactic acid production and except the economic viability of the process offers a solution of their disposal. Fermentation process depends on chemical and physical nature of feedstocks and the lactic acid producer. This review describes the characteristics, abilities and limits of microorganisms involved in lactic acid production, as well as the characteristics and types of waste products for lactic acid production. The fermentation methods that have been recently reported to improve lactic acid production are summarized and compared. In order to improve processes and productivity, fed-batch fermentation, fermentation with immobilized cell systems and mixed cultures and opportunities of open (non-sterilized fermentation have been investigated.

  10. Effects of chicken by-product gelatin on the physicochemical properties and texture of chocolate spread.

    Science.gov (United States)

    Almeida, Poliana Fernandes; Lannes, Suzana Caetano da Silva

    2017-10-01

    Chocolate spread has a fat-based formulation and the application of gelatin as a fat replacement is related to the demand for healthier foods. The aim of this study was to evaluate the influence of gelatin as a by-product from the poultry industry in the fat replacement of chocolate spread. Vegetable fat was replaced (15, 25, 50, 75, and 100%) with gelatin (0.3, 0.5, 0.8, 1.0, and 1.2%) using a central composite rotatable design and the effects were evaluated by a response surface methodology. Formulations with a greater proportion of fat were lighter, of higher volume and lower density. As expected, water activity was intensified in low-fat formulations. The consistency was controlled mainly by the properties of the gelatin phase. The formulations with 50 and 75% fat replacement and 0.5-1.0% gelatin had satisfactory spreadability at 10C. All formulations were spreadable at 20C. Low-fat samples with low gelatin concentrations, at 30C, had very low consistency. Statistically, the properties were significantly influenced by the factors analyzed according to the mathematical models. Although several studies have been conducted on obtaining alternative gelatin sources for mammals, the extracted gelatin from poultry by-product is still little explored and the knowledge on the application in food products, particularly in complex systems such as emulsions, has not been well established. The development of a low-fat food should take into account the complexity of the system involved, such as the emulsion spreads. The incorporation of gelatin in aqueous solution is a challenging task because the physical properties and the rheological behavior can be strongly influenced. Given the nutritional and functional properties of the gelatin and chocolate and its wide acceptability among the consumers, the incorporation of these two ingredients in the development of a new product sets up a promising study. © 2016 Wiley Periodicals, Inc.

  11. Possibility of using by-products of the steelmaking industry for removing lead from aqueous solutions

    Directory of Open Access Journals (Sweden)

    Martín, M. I.

    2008-06-01

    Full Text Available A study is made of the use of two steelmaking industry by-products (rolling mill scale and blast furnace sludge as adsorbent materials for removing Pb2+ ions from aqueous solutions. The adsorption of Pb2+ on these materials has been studied by the determination of adsorption isotherms. Several variables that affect the process (contact time, initial lead ion concentration and temperature were evaluated. The adsorption processes are analysed using the Langmuir theory. Desorption processes for the metal from loaded by-products were also studied under different experimental conditions. This paper shows that these industrial residues are effective adsorbents for lead ions in aqueous solutions within the range of working concentrations.

    Se estudia el uso de dos subproductos de la industria del acero (cascarilla de laminación y lodo de horno alto como materiales adsorbentes para eliminar iones Pb2+ de soluciones acuosas. La adsorción de Pb2+ sobre estos materiales se ha estudiado determinando las isotermas de adsorción. Se evaluaron diferentes variables que afectan al proceso (tiempo de contacto, concentración inicial de iones plomo y temperatura. Los procesos de adsorción se estudian usando la teoría de Langmuir. Los procesos de desorción de los metales también se estudiaron bajo diferentes condiciones experimentales. Este trabajo muestra que estos residuos industriales son adsorbentes efectivos de iones plomo en soluciones acuosas en el rango de las concentraciones de trabajo utilizadas.

  12. Nutrient and dissolved organic carbon removal from natural waters using industrial by-products.

    Science.gov (United States)

    Wendling, Laura A; Douglas, Grant B; Coleman, Shandel; Yuan, Zheng

    2013-01-01

    Attenuation of excess nutrients in wastewater and stormwater is required to safeguard aquatic ecosystems. The use of low-cost, mineral-based industrial by-products with high Ca, Mg, Fe or Al content as a solid phase in constructed wetlands potentially offers a cost-effective wastewater treatment option in areas without centralised water treatment facilities. Our objective was to investigate use of water treatment residuals (WTRs), coal fly ash (CFA), and granular activated carbon (GAC) from biomass combustion in in-situ water treatment schemes to manage dissolved organic carbon (DOC) and nutrients. Both CaO- and CaCO(3)-based WTRs effectively attenuated inorganic N species but exhibited little capacity for organic N removal. The CaO-based WTR demonstrated effective attenuation of DOC and P in column trials, and a high capacity for P sorption in batch experiments. Granular activated carbon proved effective for DOC and dissolved organic nitrogen (DON) removal in column trials, but was ineffective for P attenuation. Only CFA demonstrated effective removal of a broad suite of inorganic and organic nutrients and DOC; however, Se concentrations in column effluents exceeded Australian and New Zealand water quality guideline values. Water treated by filtering through the CaO-based WTR exhibited nutrient ratios characteristic of potential P-limitation with no potential N- or Si-limitation respective to growth of aquatic biota, indicating that treatment of nutrient-rich water using the CaO-based WTR may result in conditions less favourable for cyanobacterial growth and more favourable for growth of diatoms. Results show that selected industrial by-products may mitigate eutrophication through targeted use in nutrient intervention schemes.

  13. Using event related potentials to identify a user's behavioural intention aroused by product form design.

    Science.gov (United States)

    Ding, Yi; Guo, Fu; Zhang, Xuefeng; Qu, Qingxing; Liu, Weilin

    2016-07-01

    The capacity of product form to arouse user's behavioural intention plays a decisive role in further user experience, even in purchase decision, while traditional methods rarely give a fully understanding of user experience evoked by product form, especially the feeling of anticipated use of product. Behavioural intention aroused by product form designs has not yet been investigated electrophysiologically. Hence event related potentials (ERPs) were applied to explore the process of behavioural intention when users browsed different smart phone form designs with brand and price not taken into account for mainly studying the brain activity evoked by variety of product forms. Smart phone pictures with different anticipated user experience were displayed with equiprobability randomly. Participants were asked to click the left mouse button when certain picture gave them a feeling of behavioural intention to interact with. The brain signal of each participant was recorded by Curry 7.0. The results show that pictures with an ability to arouse participants' behavioural intention for further experience can evoke enhanced N300 and LPPs (late positive potentials) in central-parietal, parietal and occipital regions. The scalp topography shows that central-parietal, parietal and occipital regions are more activated. The results indicate that the discrepancy of ERPs can reflect the neural activities of behavioural intention formed or not. Moreover, amplitude of ERPs occurred in corresponding brain areas can be used to measure user experience. The exploring of neural correlated with behavioural intention provide an accurate measurement method of user's perception and help marketers to know which product can arouse users' behavioural intention, maybe taken as an evaluating indicator of product design. Copyright © 2016 Elsevier Ltd and The Ergonomics Society. All rights reserved.

  14. Coal slurry solids/coal fluidized bed combustion by-product mixtures as plant growth media

    Science.gov (United States)

    Darmody, R.G.; Green, W.P.; Dreher, G.B.

    1998-01-01

    Fine-textured, pyritic waste produced by coal cleaning is stored in slurry settling ponds that eventually require reclamation. Conventionally, reclamation involves covering the dewatered coal slurry solids (CSS) with 1.3 m of soil to allow plant growth and prevent acid generation by pyrite oxidation. This study was conducted to determine the feasiblity of a less costly reclamation approach that would eliminate the soil cover and allow direct seeding of plants into amended CSS materials. Potential acidity of the CSS would be neutralized by additions of fluidized-bed combustion by-product (FBCB), an alkaline by-product of coal combustion. The experiment involved two sources of CSS and FBCB materials from Illinois. Birdsfoot trefoil (Lotus corniculatus L.), tall fescue (Festuca arundinacea Schreb.), and sweet clover (Melilotus officinalis (L.) Lam.) were seeded in the greenhouse into pots containing mixtures of the materials. CSS-1 had a high CaCO3:FeS2 ratio and needed no FBCB added to compensate for its potential acidity. CSS-2 was mixed with the FBCB materials to neutralize potential acidity (labeled Mix A and B). Initial pH was 5.6, 8.8, and 9.2 for the CSS-1, Mix A, and Mix B materials, respectively. At the end of the 70-day experiment, pH was 5.9 for all mixtures. Tall fescue and sweet clover grew well in all the treatments, but birdsfoot trefoil had poor emergence and survival. Elevated tissue levels of B, Cd, and Se were found in some plants. Salinity, low moisture holding capacity, and potentially phytotoxic B may limit the efficacy of this reclamation method.

  15. Waste-to-energy possibilities for industrial olive and grape by-products in Extremadura

    Energy Technology Data Exchange (ETDEWEB)

    Celma, A.R.; Rojas, S. [Universidad de Extremadura, Badajoz (Spain). Departamento de Ingenieria Quimica y Energetica; Lopez-Rodriguez, F. [Universidad de Extremadura, Badajoz (Spain). Area de Proyectos de Ingenieria

    2007-07-15

    The olive and grape agro-industrial sectors have a major economic importance in Extremadura. Annual production of olive oil is more than 50 x 10{sup 3} t, and of wine is more than 3 x 10{sup 6} hectolitres. The large amounts of by-products are in most cases under-used, although they could be converted into a zero cost of the waste at the point of origin. In this context, the present work describes an estimate of plant size, and an economic analysis of grate firing+steam turbine (GF/ST) and fluidized bed combustion+steam turbine (FBC/ST) waste-to-energy solutions using industrial olive and grape by-products in Extremadura. The fuel is dry olive husk waste (OH), olive mill wastewater (OMW), OH+OMW sludge, and grape waste from wineries, with total calculated specific costs of 3.28, 8.09, 2.67, and 2.05 EUR GJ{sup -1} with respect to the lower heating value (LHV), respectively. The logistics component corresponding to trucking the biomass to the power production plant is that of greatest economic importance, even when the logistics strategy includes de-centralized drying plants. For real onsite availabilities of OH 21.084 x 10{sup 3} t, OMW 37.483 x 10{sup 3} t, olive sludge 87.462 x 10{sup 3} t, and grape waste 89.486 x 10{sup 3} t, the gross power is 19.13 MW for a GF/ST plant and 20.46 MW for an FBC/ST plant. The results are compared using standard economic indices - net present value (NPV), profitability index (PI), internal rate of return (IRR), and payback time (PBT). A sensitivity and risk analysis of the proposals showed the GF/ST option to be the better suited to the studied scenario, with better values for all the indicators. (author)

  16. Host responses to interspecific brood parasitism: a by-product of adaptations to conspecific parasitism?

    Science.gov (United States)

    2014-01-01

    Background Why have birds evolved the ability to reject eggs? Typically, foreign egg discrimination is interpreted as evidence that interspecific brood parasitism (IP) has selected for the host’s ability to recognize and eliminate foreign eggs. Fewer studies explore the alternative hypothesis that rejection of interspecific eggs is a by-product of host defenses, evolved against conspecific parasitism (CP). We performed a large scale study with replication across taxa (two congeneric Turdus thrushes), space (populations), time (breeding seasons), and treatments (three types of experimental eggs), using a consistent design of egg rejection experiments (n = 1057 nests; including controls), in areas with potential IP either present (Europe; native populations) or absent (New Zealand; introduced populations). These comparisons benefited from the known length of allopatry (one and a half centuries), with no gene flow between native and introduced populations, which is rarely available in host-parasite systems. Results Hosts rejected CP at unusually high rates for passerines (up to 60%). CP rejection rates were higher in populations with higher conspecific breeding densities and no risks of IP, supporting the CP hypothesis. IP rejection rates did not covary geographically with IP risk, contradicting the IP hypothesis. High egg rejection rates were maintained in the relatively long-term isolation from IP despite non-trivial rejection costs and errors. Conclusions These egg rejection patterns, combined with recent findings that these thrushes are currently unsuitable hosts of the obligate parasitic common cuckoo (Cuculus canorus), are in agreement with the hypothesis that the rejection of IP is a by-product of fine-tuned egg discrimination evolved due to CP. Our study highlights the importance of considering both IP and CP simultaneously as potential drivers in the evolution of egg discrimination, and illustrates how populations introduced to novel ecological contexts

  17. A gas laser system

    Energy Technology Data Exchange (ETDEWEB)

    Sydzo, Y.; Norio, T.

    1984-04-02

    It is reported that an improved gas laser system with active medium circulation has been developed. The design of the gas laser is given in block diagram form, and its principle of operation is described in detail. The gaseous active medium flows through the inlet hole to the laser system, and is uniformly dispersed as it flows through the cylindrical diffuser. Thus, a near uniform distribution in the flow velocity of the gas flow in the laser discharge tube is achieved. The gas flow velocity along the edges of the discharge tube exceeds somewhat the flow velocity in the central section, which aids in generating and maintaining a stable and uniform pumping discharge. It is established experimentally that when using the proposed design, the parameters of the output emission from the gas laser are improved significantly. A relationship is given which demonstrates the near linear relationship between the pumping voltage and the output emission power from a gas laser.

  18. 78 FR 11638 - Michigan Consolidated Gas Company, DTE Gas Company, DTE Gas Company; Notice of Petition

    Science.gov (United States)

    2013-02-19

    ... Energy Regulatory Commission Michigan Consolidated Gas Company, DTE Gas Company, DTE Gas Company; Notice... Docket Nos. PR13-29-000, and PR13-30-000 (not consolidated), Michigan Consolidated Gas Company (MichCon) and DTE Gas Company (DTE Gas) filed to institute a name change to both itself from MichCon to DTE...

  19. 75 FR 13524 - Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas Transmission Company, LLC...

    Science.gov (United States)

    2010-03-22

    ... Energy Regulatory Commission Northern Natural Gas Company, Southern Natural Gas Company, Florida Gas... of Application March 16, 2010. Take notice that on March 5, 2010, Northern Natural Gas Company... other owners, Southern Natural Gas Company, Florida Gas Transmission Company, LLC, Transcontinental...

  20. Gas in Galaxies

    OpenAIRE

    Bland-Hawthorn, J.; Reynolds, R. J.

    2000-01-01

    The interstellar medium (ISM) can be thought of as the galactic atmosphere which fills the space between stars. When clouds within the ISM collapse, stars are born. When the stars die, they return their matter to the surrounding gas. Therefore the ISM plays a vital role in galactic evolution. The medium includes starlight, gas, dust, planets, comets, asteroids, fast moving charged particles (cosmic rays) and magnetic fields. The gas can be further divided into hot, warm and cold components, e...

  1. Gas to liquids

    Energy Technology Data Exchange (ETDEWEB)

    Roche, Pat

    2011-04-15

    Sasol, a South African company, along with the Canadian company Talisman, are looking at gas to liquid process opportunities in North America. Sasol decided to launch a study into the feasibility of gas to liquid (GTL) operation in western Canada, and according to previous studies GTL would need a crude barrel price of $85 or higher combined with a gas price of $4 or less to be economical. Sasol is already operating a GTL plant in Qatar.

  2. Re-Use of Clean Coal Technology By-Products in the Construction of Low Permeability Liners. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Wolfe, William E. [The Ohio State Univ., Columbus, OH (United States); Butalia, Tarunjit S. [The Ohio State Univ., Columbus, OH (United States); Walker, Harold [The Ohio State Univ., Columbus, OH (United States); Mitsch, William [The Ohio State Univ., Columbus, OH (United States)

    2005-07-15

    This final project report presents the results of a research program conducted at The Ohio State University from January 3, 2000 to June 30, 2005 to investigate the long-term use of stabilized flue gas desulfurization (FGD) materials in the construction of low permeability liners for ponds and wetlands. The objective of the research program was to establish long-term field-verified time-dependent relationships for the performance of liners constructed from stabilized FGD byproducts generated in Ohio. The project objective was accomplished with a coordinated program of testing and analyzing small-scale laboratory specimens under controlled conditions, mediumscale wetland experiments, and monitoring of a full-scale FGD-lined pond facility. Although the specific uses directly addressed by this report include liners for surface impoundments, the results presented in this study are also useful in other applications especially in the design of daily covers and liners for landfills, seepage cutoff walls and trenches, and for nutrient retention and pollution mitigation wetlands. The small-scale laboratory tests and monitoring of the full-scale FGD lined facility (capacity of one million gallons) shows that stabilized FGD materials can be used as low permeability liners in the construction of water and manure holding ponds. Actual long-term permeability coefficients in the range of 10-7 cm/sec (3 x 10-9 ft/sec) can be obtained in the field by compacting lime and fly ash enriched stabilized FGD materials. Leachate from the FGD material meets Ohio’s non-toxic criteria for coal combustion by-products, and for most potential contaminants the national primary and secondary drinking water standards are also met. The low permeability non-toxic FGD material investigated in this study poses very minimal risks, if any, for groundwater contamination. The FGD wetland experiments indicated no significant differences in phosphorus retention between the clay and FGD

  3. Murciano-Granadina Goat Performance and Methane Emission after Replacing Barley Grain with Fibrous By-Products.

    Directory of Open Access Journals (Sweden)

    Carla Ibáñez

    Full Text Available The aim of this experiment was to study the effects of substituting dietary barley grain with orange pulp or soybean hulls on energy, nitrogen and carbon balance, methane emission and milk performance in dairy goats. Twelve Murciano-Granadina dairy goats in midlactation were selected and divided into three groups based on similar body weight (42.1 ± 1.2 kg and milk yield (2.16 ± 0.060 kg/goat/day. The experiment was conducted in an incomplete crossover design where one group of four goats was fed a mixed ration of barley grain (BRL, another group of four goats replaced barley grain with orange pulp (OP and the last group of four goats with soybean hulls (SH. After adaptation to diets, the goats were allocated to individual metabolism cages and intake, faeces, urine and milk were recorded and analysed. Then, gas exchange measurements were recorded by a mobile open-circuit indirect calorimetry system using a head box. Dry matter intake was similar for all three groups (2.03 kg/d, on average. No influence of the diet was observed for energy balance and the efficiency of use of metabolizable energy for milk production was 0.61. The OP and SH diets showed greater (P < 0.05 fat mobilization (-42.8 kJ/kg of BW0.75, on average than BRL (19.2 kJ/kg of BW0.75. Pentadecanoic acid (15:0 and heptadecanoic acid (17:0 were potential biomarkers of rumen function because the higher contents found in the milk of OP and SH goats than BRL suggest a negative impact of these diets on rumen bacterial metabolism; probably linked to the lower nitrogen supply of diet OP to synthesize microbial protein and greater content of fat in diet SH. Replacement of cereal grain with fibrous by-products did not increased enteric methane emissions (54.7 L/goat per day, on average. Therefore, lactating goats could utilize dry orange pulp and soybean hulls diets with no detrimental effect on milk performance.

  4. ELECTROSTATIC PHENOMENA IN GAS-SOLIDS FLUIDIZED BEDS

    Institute of Scientific and Technical Information of China (English)

    Hsiaotao T. Bi

    2005-01-01

    Electrostatic charges are generated by particle-wall, particle-particle and particle-gas contacts in gas-solids transport lines and fluidized bed reactors. High particle charge densities can lead to particle agglomeration,particle segregation, fouling of reactor walls and internals, leading to undesirable by-product and premature shut-down of processing equipment. In this paper, the charge generation, dissipation and segregation mechanisms are examined based on literature data and recent experimental findings in our laboratory. The particle-wall contact charging is found to be the dominant charge generation mechanism for gas-solids pneumatic transport lines, while bipolar charging due to intimate particle-particle contact is believed to be the dominant charge generation mechanism in gas fluidized beds. Such a bipolar charging mechanism is also supported by the segregation patterns of charged particles in fluidized beds in which highly charged particles tend to concentrate in the bubble wake and drift region behind rising bubbles.

  5. Gas turbine gas path diagnostics: A review

    Directory of Open Access Journals (Sweden)

    Fentaye Amare Desalegn

    2016-01-01

    Full Text Available In this competitive business world one way to increase profitability of a power production unit is to reduce the operation and maintenance expenses. This is possible if the gas turbine availability and reliability is improved using the appropriate maintenance action at the right time. In that case, fault diagnostics is very critical and effective and advanced methods are essential. Gas turbine diagnostics has been studied for the past six decades and several methods are introduced. This paper aims to review and summarise the published literature on gas path diagnostics, giving more emphasis to the recent developments, and identify advantages and limitations of the methods so that beginners in diagnostics can easily be introduced. Towards this end, this paper, identifies various diagnostic methods and point out their pros and cons. Finally, the paper concludes the review along with some recommended future works.

  6. Almacenamiento de gas natural

    Directory of Open Access Journals (Sweden)

    Tomás Correa

    2008-12-01

    Full Text Available The largest reserves of natural gas worldwide are found in regions far of main cities, being necessary different alternatives to transport the fluid to the consumption cities, such as pipelines, CNG or ships, LNG, depending on distances between producing regions and demanding regions and the producing volumes. Consumption regions have three different markets to naturalgas; residential and commercial, industrial and power generation sector. The residential and commercial is highly seasonal and power generation sector is quite variable depending on increases of temperature during summer time. There are also external issuesthat affect the normal gas flow such as fails on the national system or unexpected interruptions on it, what imply that companies which distribute natural gas should design plans that allow supplying the requirements above mentioned. One plan is using underground natural gas storage with capacities and deliverability rates enough to supply demands. In Colombia there are no laws in this sense but it could be an exploration to discuss different ways to store gas either way as underground natural gas storage or above superficies. Existing basically three different types of underground natural gas storage; depleted reservoirs, salt caverns and aquifers. All ofthem are adequate according to geological characteristics and the needs of the distributors companies of natural gas. This paper is anexploration of technical and economical characteristics of different kind of storages used to store natural gas worldwide.

  7. Gas speed flow transducer

    Directory of Open Access Journals (Sweden)

    Godovaniouk V. N.

    2011-08-01

    Full Text Available The design of a gas speed flow transducer using the coupling of gas speed and heat streams within the transducer itself is proposed. To maintain the heat balance between two thermoresistors under gas stream at different temperatures, it provides energy consumption monitoring. The detailed combined planar technology for the transducer production is presented. The worked-out measurement procedure allows to make measurements in the temperature range. Information enough to organize production of cheap, reliable and precise gas speed flow transducers is given.

  8. Dubai gas lift automation

    Energy Technology Data Exchange (ETDEWEB)

    Coltharp, E.D.; Khokhar, M.

    1984-09-01

    Dubai Petroleum Company has recently installed a computer gas lift surveillance and gas lift gas injection control system in the Fateh and S.W. Fateh Fields located in the southern part of the Arabian Gulf. This system is the fourth generation of the computer control system installed in California in 1971 by Conoco, Inc. This paper describes the advantages and problems in this system to monitor and control the gas lift operation of 116 wells through 30 intelligent remote terminal units (RTU). In addition, this system monitors the condition of critical operational

  9. Shake gas. Basic information

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2010-08-15

    The ongoing improvement of production technologies has enabled access to unconventional gas resources present in source rocks. Whether Poland is going to see a gas revolution depends chiefly on the geological conditions. At this point it is difficult to estimate the actual size of Poland's shale gas resources and commercialization of shale gas production. First results will be known in the next four or five years, when operators complete the work under exploration and appraisal licences granted to them by the Ministry of the Environment. Polish government is offering licences on exceptionally favourable terms as an incentive for research on unconventional gas resources. Such an approach is driven by the strategic objective of ending Poland's reliance on foreign sources of natural gas in the future. Shale gas will not change Poland's and the region's energy landscape instantaneously. As in the case of all commodity and energy revolutions, changes occur slowly, but shale gas development offers huge opportunities for a permanent shift in the Polish and European energy sectors. Poland stands a chance of becoming fully independent on natural gas imports, and Polish companies - a chance of improving their international standing.

  10. Natural gas annual 1997

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1998-10-01

    The Natural Gas Annual provides information on the supply and disposition of natural gas to a wide audience including industry, consumers, Federal and State agencies, and educational institutions. The 1997 data are presented in a sequence that follows natural gas (including supplemental supplies) from its production to its end use. This is followed by tables summarizing natural gas supply and disposition from 1993 to 1997 for each Census Division and each State. Annual historical data are shown at the national level. 27 figs., 109 tabs.

  11. Gas utilization technologies

    Energy Technology Data Exchange (ETDEWEB)

    Biljetina, R.

    1994-09-01

    One of the constant challenges facing the research community is the identification of technology needs 5 to 15 years from now. A look back into history indicates that the forces driving natural gas research have changed from decade to decade. In the 1970s research was driven by concerns for adequate supply; in the 1980s research was aimed at creating new markets for natural gas. What then are the driving forces for the 1990s? Recent reports from the natural gas industry have helped define a new direction driven primarily by market demand for natural gas. A study prepared by the Interstate Natural Gas Association of America Foundation entitled ``Survey of Natural Research, Development, and Demonstration RD&D Priorities`` indicated that in the 1990s the highest research priority should be for natural gas utilization and that technology development efforts should not only address efficiency and cost, but environmental and regulatory issues as well. This study and others, such as the report by the American Gas Association (A.G.A.) entitled ``Strategic Vision for Natural Gas Through the Year 2000,`` clearly identify the market sectors driving today`s technology development needs. The biggest driver is the power generation market followed by the industrial, transportation, appliance, and gas cooling markets. This is best illustrated by the GRI 1994 Baseline Projection on market growth in various sectors between the year 1992 and 2010. This paper highlights some of the recent technology developments in each one of these sectors.

  12. STARCH/PULP-FIBER BASED PACKAGING FOAMS AND CAST FILMS CONTAINING ALASKAN FISH BY-PRODUCTS (WASTE

    Directory of Open Access Journals (Sweden)

    Syed H. Imam

    2008-08-01

    Full Text Available Baked starch/pulp foams were prepared from formulations containing zero to 25 weight percent of processed Alaskan fish by-products that consisted mostly of salmon heads, pollock heads, and pollock frames (bones and associated remains produced in the filleting operation. Fish by-products thermoformed well along with starch and pulp fiber, and the foam product (panels exhibited useful mechanical properties. Foams with all three fish by-products, ranging between 10 and 15 wt%, showed the highest flexural modulus (500-770 Mpa. Above 20% fiber content, the modulus dropped considerably in all foam samples. Foam panels with pollock frames had the highest flexural modulus, at about 15% fiber content (770 Mpa. Foams with salmon heads registered the lowest modulus, at 25% concentration. Attempts were also made to cast starch-glycerol-poly (vinyl alcohol films containing 25% fish by-product (salmon heads. These films showed a tensile strength of 15 Mpa and elongation at break of 78.2%. All foams containing fish by-product degraded well in compost at ambient temperature (24oC, loosing roughly between 75-80% of their weight within 7 weeks. The films degraded at a much higher rate initially. When left in water, foams prepared without fish by-product absorbed water much more quickly and deteriorated faster, whereas, water absorption in foams with fish by-product was initially delayed and/or slowed for about 24 h. After this period, water absorption was rapid.

  13. Multiple complementary gas distribution assemblies

    Science.gov (United States)

    Ng, Tuoh-Bin; Melnik, Yuriy; Pang, Lily L; Tuncel, Eda; Nguyen, Son T; Chen, Lu

    2016-04-05

    In one embodiment, an apparatus includes a first gas distribution assembly that includes a first gas passage for introducing a first process gas into a second gas passage that introduces the first process gas into a processing chamber and a second gas distribution assembly that includes a third gas passage for introducing a second process gas into a fourth gas passage that introduces the second process gas into the processing chamber. The first and second gas distribution assemblies are each adapted to be coupled to at least one chamber wall of the processing chamber. The first gas passage is shaped as a first ring positioned within the processing chamber above the second gas passage that is shaped as a second ring positioned within the processing chamber. The gas distribution assemblies may be designed to have complementary characteristic radial film growth rate profiles.

  14. Sugar-Based Ethanol Biorefinery: Ethanol, Succinic Acid and By-Product Production

    Energy Technology Data Exchange (ETDEWEB)

    Donal F. Day

    2009-03-31

    The work conducted in this project is an extension of the developments itemized in DE-FG-36-04GO14236. This program is designed to help the development of a biorefinery based around a raw sugar mill, which in Louisiana is an underutilized asset. Some technical questions were answered regarding the addition of a biomass to ethanol facility to existing sugar mills. The focus of this work is on developing technology to produce ethanol and valuable by-products from bagasse. Three major areas are addressed, feedstock storage, potential by-products and the technology for producing ethanol from dilute ammonia pre-treated bagasse. Sugar mills normally store bagasse in a simple pile. During the off season there is a natural degradation of the bagasse, due to the composting action of microorganisms in the pile. This has serious implications if bagasse must be stored to operate a bagasse/biorefinery for a 300+ day operating cycle. Deterioration of the fermentables in bagasse was found to be 6.5% per month, on pile storage. This indicates that long term storage of adequate amounts of bagasse for year-round operation is probably not feasible. Lignin from pretreatment seemed to offer a potential source of valuable by-products. Although a wide range of phenolic compounds were present in the effluent from dilute ammonia pretreatment, the concentrations of each (except for benzoic acid) were too low to consider for extraction. The cellulosic hydrolysis system was modified to produce commercially recoverable quantities of cellobiose, which has a small but growing market in the food process industries. A spin-off of this led to the production of a specific oligosaccharide which appears to have both medical and commercial implications as a fungal growth inhibitor. An alternate use of sugars produced from biomass hydrolysis would be to produce succinic acid as a chemical feedstock for other conversions. An organism was developed which can do this bioconversion, but the economics of

  15. HPLC evaluation of the minor lipid components of by-products resulting from edible oil processing

    Directory of Open Access Journals (Sweden)

    EL-Shami, Safinaz Mohamed M.

    2006-12-01

    Full Text Available An analytical evaluation of some by-products resulting from edible oil refining processing steps has been carried out. By-product samples were taken from four different local refineries that apply chemical refining technology. Pretreatment of the representative samples of the by-products were done prior to analysis followed by chromatographic isolation and derivatization of the minor components, namely, free and acylated sterol (FS and AS as well as free and acylated sterylglycosides (FSG and ASG. However, tocopherols were directly determined in the pretreated samples. HPLC, using different detectors, was carried out for the determination of these minor components. Several authors have focused on the analysis of sterols and sterol esters, as well as tocopherols in the refining byproducts; however sterylglycosides, as biologically important components, have not been dealt with. This study throws light on the by – products enriched with certain minor components to be possibly utilized as sources for such components. Also, the role of the conditions of the refining steps followed in removing these valuable minor components from oils was discussed. It was found that soapstock samples contained various amounts of total tocopherols ranging from 80 to 230ppm; total FS and AS ranged from 240 to 4000 mg/100g while total FSG and ASG ranged from 1120 to 6375 mg/100g. In the case of deodorization distillate samples total tocopherols ranged from 960 to 7360ppm; total FS and AS ranged from 1020 to 4160 mg/100g and total FSG, ASG ranged from 395 to 880 mg/100g.El trabajo realiza una evaluación analítica de algunos subproductos resultantes del la refinación de aceites comestibles. Las muestras procedieron de 4 plantas que aplicaban refinación química. Después de un pretratamiento de las muestras estas se sometieron a un análisis cromatográfico para el aislamiento y derivatización de los siguientes componentes minoritarios: esteroles libres y

  16. Assessing the greenhouse gas emissions from poultry fat biodiesel

    DEFF Research Database (Denmark)

    Jørgensen, Andreas; Bikker, Paul; Herrmann, Ivan Tengbjerg

    2012-01-01

    original use. This implies that even though the use of biodiesel is assumed to displace petrochemical diesel, the ‘original user’ of the poultry fat will have to find a substitute, whose production leads to a greenhouse gas emissions comparable to what is saved through driving on poultry fat biodiesel...... rather than petrochemical diesel. Given that it is the production of the substitute for the poultry fat which mainly eliminates the benefit from using poultry fat for biodiesel, it is argued that whenever assessing the greenhouse gas emissions from biodiesel made from by-products (such as rendered animal...

  17. Natural gas outlook

    Energy Technology Data Exchange (ETDEWEB)

    Turner, R. [TransCanada Transmission, Calgary, AB (Canada)

    2004-07-01

    This presentation reviewed natural gas supply and demand issues facing Ontario and outlined TransCanada's role as a key player in Ontario's energy industry. TransCanada's gas transmission assets include 39,000 km of wholly owned pipelines from British Columbia to Atlantic Canada that carry 11 Bcf of gas per day. In addition, TransCanada operates 29 power generating plants, of which 6 are in Ontario. The company is also involved the proposed Mackenzie Valley and Alaska pipeline. A map illustrating Ontario and Quebec operations was included along with graphs depicting the 2004 base case for North American gas demand by region. Historical and forecasted gas demand by end use sector in Ontario and Quebec was also illustrated. A chart of North American gas supply indicates that new supply is needed to meet energy demands. Production forecasts for Western Canada for conventional and unconventional reserves indicates that by 2015, unconventional reserves such as coalbed methane (CBM) will make up a larger portion of the production mix. A map indicating existing and proposed import terminals along the Atlantic and Pacific coasts for liquefied natural gas (LNG) was included. The challenges facing the North American gas market include price volatility, the need to update energy policies, the need to improve regulatory efficiency, and aligning the interests of market participants. It was concluded that although natural gas from Western Canada will continue to be a stable supply source for many years, the natural gas market in North America is seeking new supply in frontier gas, LNG and CBM to meeting growing demand. 1 tab., 11 figs.

  18. Gas drainage technology of high gas and thick coal seam

    Institute of Scientific and Technical Information of China (English)

    HE Tian-cai; LI Hai-gui; ZHANG Hai-jun

    2009-01-01

    Gas drainage in Jincheng Mining Group Co., Ltd. was introduced briefly and the importance of gas drainage in gas control was analyzed. Combined with coal-bed gas oc-currence and gas emission, the double system of gas drainage was optimized and a pro-gressive gas drainage model was experimented on. For guaranteed drainage, excavation and mining and realization of safety production and reasonable exploitation of gas in coal seams, many drainage methods were adopted to solve the gas problem of the working face.

  19. Nutritive composition of soybean by-products and nutrient digestibility of soybean pod husk

    Directory of Open Access Journals (Sweden)

    Sompong Sruamsiri

    2008-11-01

    Full Text Available Soybean by-products (soybean germ, soybean milk residue, soybean hull, soybean pod husk and soybean stem were subjected to proximate analysis, and in vitro digestibility of DM (IVDMD, ADF (IVADFD and NDF (IVNDFD were determined after digesting the by-products in buffered rumen fluid for 24 or 48 h in 2 ANKOMII Daisy Incubators using Completely Randomised Design. Four native cattle (body weight 210 + 13.5 kg were used to determine nutrient digestibility of soybean pod husk. They were randomly assigned by Cross-over Design to receive two roughage sources, i.e. guinea grass and guinea grass + soybean pod husk (60:40 DM basis, in two experimental periods. Guinea grass was harvested on the 35th day after the first cut of the year and used as green forage. Total collection method was used to determine the digestibility coefficients and digestibility by difference was used to calculate nutrient digestibility of soybean pod husk.The nutritive composition showed that soybean germ was highest in CP content (42.27% of DM and EE content (5.07% of DM but lowest in NDF and ADF content (20.09 and 21.53% of DM respectively. The average CP content of soybean straw, soybean stem and soybean pod husk was low (4.91, 4.67 and 5.04% respectively, while ADF content was high (42.76, 38.01 and 42.08% respectively. In vitro digestibility of DM (IVDMD, ADF (IVADFD and NDF (IVNDFD showed that all of them, except soybean stem, can be used as cattle feed, e.g. as supplemented feed or admixture in concentrate feed. Digestibility coefficients of guinea grass were higher in CP, CF and EE when compared to the other groups. The apparent digestibility of CP and CF were highly different (P0.05. The digestibility of nutrients (DM, OM, CP, CF, NFE, NDF and ADF of soybean pod husk were 53.81 + 4.3, 59.69 + 4.6, 42.38 + 3.8, 30.71 + 3.2, 50.74 + 4.3, 75.26 + 4.0, 45.78 + 3.7 and 30.53 + 4.2 % respectively. Soybean pod husk was higher in total digestible nutrients (TDN (51.87 + 3.3 vs

  20. Chronic toxicity of parabens and their chlorinated by-products in Ceriodaphnia dubia.

    Science.gov (United States)

    Terasaki, Masanori; Abe, Ryoko; Makino, Masakazu; Tatarazako, Norihisa

    2015-01-01

    The chronic toxicity of 12 compounds of parabens and their chlorinated by-products was investigated using 7-day Ceriodaphnia dubia test under static renewal condition in order to generate information on how to disinfect by-products of preservatives that are discharged in aquatic systems. The mortality and inhibition of reproduction tended to increase with increasing hydrophobicity and decreased with the degree of chlorination of parabens. The EC50 values for mortality, offspring number, and first brood production ranged between 0.30-3.1, 0.047-12, and 1.3-6.3 mg L(-1) , respectively. For the number of neonates, the most sensitive endpoint, the no-observed-effect concentration (NOEC) and lowest-observed-effect concentration (LOEC) values ranged from 0.63 to 10 mg L(-1) and from 1.2 to 19 mg L(-1) , respectively. Methylparaben (MP), benzylparaben (BnP), and dichlorinated BnP (Cl2 BnP) elicited a significant decrease in offspring numbers even at their lowest concentration tested; the NOEC for these compounds was determined to be less than the lowest test concentration (1.3, 0.04, and 0.63 mg L(-1) for MP, BnP, and Cl2 BnP, respectively). Propylparaben (PP), chlorinated PP, isopropylparaben (iPP), and chlorinated iPP exhibited nonmonotonic concentration-dependent response; their NOEC and LOEC values could not be determined. The multivariate approach involving principal component analysis and hierarchical cluster analysis revealed four groups that corresponded to the toxicological profiles of parabens. Our results suggested that disinfection of parabens by chlorination could reduce aquatic toxicity of original compounds. The findings obtained in our study together with the data available on paraben concentrations in aquatic systems can be used to perform preliminary risk assessment by comparing the predicted environmental concentration (PEC) with the predicted no-effect concentration (PNEC) for the marine aquatic environment. The calculated PEC/PNEC ratios ranged from 0

  1. Developing Shale Gas

    Institute of Scientific and Technical Information of China (English)

    2013-01-01

    outlook weekly may 20 with the increase of green gas emissions, combating climate change has become a common concern across the world. upping the levels of natural gas in terms of global energy consumption is essential to realize a low-carbon future. for china,

  2. Growing power : renewable natural gas

    Energy Technology Data Exchange (ETDEWEB)

    Kotelko, M. [Highmark Renewables, Vegreville, AB (Canada)

    2006-07-01

    This presentation described the sustainable production practices used at Alberta's Highland Feeders Ltd., one of Canada's largest cattle feeding operations. In particular, it presented an integrated manure utilization system (IMUS) technology developed by the Alberta Research Council and licensed to Highmark Renewables, a subsidiary of Highland Feeders. The rapidly expanding livestock industry in Canada presents challenges and opportunities for the proper treatment and use of large quantities of manure. With IMUS technology, methane gas produced by livestock operations can be harnessed to produce electricity, as demonstrated at Highmark Renewables' pilot plant which processes solid feedlot manure to produce electricity. The sustainable manure management process has major implications for intensive livestock operations. In addition to generating biogas for use in a cogeneration plant, the IMUS technology provides a value-added soil amendment. Raw manure is placed in a hopper and fed into anaerobic digester tanks. The dry solid by-product is a bio-based, nutrient rich fertilizer, while the liquid component can be recycled for irrigation water. The cogeneration plant will produce electricity for cattle feeding operations, with surplus power sold to the Alberta power grid. The benefits from IMUS include lower manure handling costs; protection of water resources; odour reduction; recycling of waste water; lower energy costs; and, value-added revenue from the sale of energy and bio-based fertilizer. tabs., figs.

  3. Production development and utilization of Zimmer Station wet FGD by-products. Final report. Volume 5, A laboratory greenhouse study conducted in fulfillment of Phase 2, Objective 2 titled. Use of FGD by-product gypsum enriched with magnesium hydroxide as a soil amendment

    Energy Technology Data Exchange (ETDEWEB)

    Yibirin, H. [Ohio State Univ., Wooster, OH (United States); Stehouwer, R. C. [Ohio State Univ., Wooster, OH (United States); Bigham, J. M. [Ohio State Univ., Wooster, OH (United States); Soto, U. I. [Ohio State Univ., Wooster, OH (United States)

    1997-01-31

    The Clean Air Act, as revised in 1992, has spurred the development of flue gas desulfurization (FGD) technologies that have resulted in large volumes of wet scrubber sludges. In general, these sludges must be dewatered, chemically treated, and disposed of in landfills. Disposal is an expensive and environmentally questionable process for which suitable alternatives must be found. Wet scrubbing with magnesium (Mg)-enhanced lime has emerged as an efficient, cost effective technology for SO2 removal. When combined with an appropriate oxidation system, the wet scrubber sludge can be used to produce gypsum (CaSO4-2H2O) and magnesium hydroxide [Mg(OH)2] of sufficient purity for beneficial re-use. Product value generally increases with purity of the by-product(s). The pilot plant at the CINERGY Zimmer Station near Cincinnati produces gypsum by products that can be formulated to contain varying amounts of Mg(OH)2. Such materials may have agricultural value as soil conditioners, liming agents and sources of plant nutrients (Ca, Mg, S). This report describes a greenhouse study designed to evaluate by-product gypsum and Mg gypsum from the Zimmer Station pilot plant as amendments for improving the quality of agricultural soils and mine spoils that are currently unproductive because of phytotoxic conditions related to acidity and high levels of toxic dissolved aluminum (Al). In particular, the technical literature contains evidence to suggest that gypsum may be more effective than agricultural limestone in modifying soil chemical conditions below the immediate zone of application. Representative samples of by-product gypsum and Mg(OH)2 from the Zimmer Station were initially characterized. The gypsum was of high chemical purity and consisted of well crystalline, lath-shaped particles of low specific surface area. By contrast, the by-product Mg(OH)2 was a high surface area material (50 m2 g

  4. Formation of disinfection by-products after pre-oxidation with chlorine dioxide or ferrate.

    Science.gov (United States)

    Yang, Xin; Guo, Wanhong; Zhang, Xing; Chen, Feng; Ye, Tingjin; Liu, Wei

    2013-10-01

    The effect of pre-oxidation with chlorine dioxide (ClO2) or ferrate (Fe(VI)) on the formation of disinfection by-products (DBPs) during chlorination or chloramination was tested with natural waters from 12 sources (9 surface waters, 1 groundwater, and 2 wastewater effluents). DBPs investigated included trihalomethanes (THM), chloral hydrate (CH), haloketones (HK), haloacetonitriles (HAN) and trichloronitromethane (TCNM), chlorite and chlorate. Chlorite and chlorate were found in the ClO2-treated waters. Application of 1 mg/L ClO2 ahead of chlorination reduced the formation potential for THM by up to 45% and the formation of HK, HAN and TCNM in most of the samples. The CH formation results were mixed. The formation of CH and HK was enhanced with low doses of Fe(VI) (1 mg/L as Fe), but was greatly reduced at higher doses (20 mg/L Fe). Fe(VI) reduced the formation of THM, HAN and TCNM in most of the samples. Reduced potential for the formation of NDMA was observed in most of the samples after both ClO2 and Fe(VI) pre-oxidation.

  5. TREATMENT OF METAL-LADEN HAZARDOUS WASTES WITH ADVANCED CLEAN COAL TECHNOLOGY BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    James T. Cobb, Jr.

    2003-09-12

    Metal-laden wastes can be stabilized and solidified using advanced clean coal technology by-products (CCTBs)--fluid bed combustor ash and spray drier solids. These utility-generated treatment chemicals are available for purchase through brokers, and commercial applications of this process are being practiced by treaters of metal-laden hazardous waste. A complex of regulations governs this industry, and sensitivities to this complex has discouraged public documentation of treatment of metal-laden hazardous wastes with CCTBs. This report provides a comprehensive public documentation of laboratory studies that show the efficacy of the stabilization and solidification of metal-laden hazardous wastes--such as lead-contaminated soils and sandblast residues--through treatment with CCTBs. It then describes the extensive efforts that were made to obtain the permits allowing a commercial hazardous waste treater to utilize CCTBs as treatment chemicals and to install the equipment required to do so. It concludes with the effect of this lengthy process on the ability of the treatment company to realize the practical, physical outcome of this effort, leading to premature termination of the project.

  6. Evidence of arsenic release promoted by disinfection by-products within drinking-water distribution systems.

    Science.gov (United States)

    Andra, Syam S; Makris, Konstantinos C; Botsaris, George; Charisiadis, Pantelis; Kalyvas, Harris; Costa, Costas N

    2014-02-15

    Changes in disinfectant type could trigger a cascade of reactions releasing pipe-anchored metals/metalloids into finished water. However, the effect of pre-formed disinfection by-products on the release of sorbed contaminants (arsenic-As in particular) from drinking water distribution system pipe scales remains unexplored. A bench-scale study using a factorial experimental design was performed to evaluate the independent and interaction effects of trihalomethanes (TTHM) and haloacetic acids (HAA) on arsenic (As) release from either scales-only or scale-biofilm conglomerates (SBC) both anchored on asbestos/cement pipe coupons. A model biofilm (Pseudomonas aeruginosa) was allowed to grow on select pipe coupons prior experimentation. Either TTHM or HAA individual dosing did not promote As release from either scales only or SBC, detecting water. In the case of scales-only coupons, the combination of the highest spike level of TTHM and HAA significantly (pdisinfected finished water in pipe networks remains to be investigated in the field.

  7. Ion-cyclotron instability in plasmas described by product-bi-kappa distributions

    Energy Technology Data Exchange (ETDEWEB)

    Santos, M. S. dos; Ziebell, L. F., E-mail: luiz.ziebell@ufrgs.br; Gaelzer, R., E-mail: rudi.gaelzer@ufrgs.br [Instituto de Física, Universidade Federal do Rio Grande do Sul, Caixa Postal 15051, CEP: 91501-970 Porto Alegre, RS (Brazil)

    2015-12-15

    The dispersion relation for parallel propagating waves in the ion-cyclotron branch is investigated numerically by considering that the velocity distribution of the ion population is a function of type product-bi-kappa. We investigate the effects of the non-thermal features and of the anisotropy associated with this type of distribution on the ion-cyclotron instability, as well as the influence of different forms of the electron distribution, by considering Maxwellian distributions, bi-kappa distributions, and product-bi-kappa distributions. The cases of ions described by either Maxwellian or bi-kappa distributions are also considered, for comparison. The results of the numerical analysis show that the increase in the non-thermal character associated with the anisotropic kappa distributions for ions contributes to enhance the instability as compared to that obtained in the Maxwellian case, in magnitude and in wave number range, with more significant enhancement for the case of ion product-bi-kappa distributions than for the case of ion bi-kappa distributions. It is also shown that the ion-cyclotron instability is decreased if the electrons are described by product-bi-kappa distributions, while electrons described by bi-kappa distributions lead to growth rates which are very similar to those obtained considering a Maxwellian distribution for the electron population.

  8. Evidence of Anti-Proliferative Activities in Blue Mussel (Mytilus edulis By-Products

    Directory of Open Access Journals (Sweden)

    Marie-Elise Carbonneau

    2013-03-01

    Full Text Available Shellfish waste components contain significant levels of high quality protein and are therefore a potential source for biofunctional high-value peptides. The feasibility of applying a pilot scale enzymatic hydrolysis process to whole Mytilus edulis and, by fractionation, recover hydrolysates presenting a biological activity of interest, was evaluated. Fractions were tested on four immortalized cancerous cell lines: A549, BT549, HCT15 and PC3. The 50 kDa fraction, enriched in peptides, presented anti-proliferative activity with all cell lines and results suggest a bioactive molecule synergy within the fraction. At a protein concentration of 44 µg/mL, the 50 kDa fraction induced a mortality of 90% for PC3, 89% for A549, 85% for HCT15 and of 81% for BT549 cell lines. At the low protein concentration of only 11 µg/mL the 50 kDa fraction still entails a cell mortality of 76% for A549 and 87% for PC3 cell lines. The 50 kDa fraction contains 56% of proteins, 3% of lipids and 6% of minerals on a dry weight basis and the lowest levels detected of taurine and methionine and highest levels of threonine, proline and glycine amino acids. The enzymatic hydrolysis process suggests that Mytilus edulis by-products should be viewed as high-valued products with strong potential as anti-proliferative agent and promising active ingredients in functional foods.

  9. The epidemiology and possible mechanisms of disinfection by-products in drinking water.

    Science.gov (United States)

    Nieuwenhuijsen, Mark J; Grellier, James; Smith, Rachel; Iszatt, Nina; Bennett, James; Best, Nicky; Toledano, Mireille

    2009-10-13

    This paper summarizes the epidemiological evidence for adverse health effects associated with disinfection by-products (DBPs) in drinking water and describes the potential mechanism of action. There appears to be good epidemiological evidence for a relationship between exposure to DBPs, as measured by trihalomethanes (THMs), in drinking water and bladder cancer, but the evidence for other cancers including colorectal cancer is inconclusive and inconsistent. There appears to be some evidence for an association between exposure to DBPs, specifically THMs, and little for gestational age/intrauterine growth retardation and, to a lesser extent, pre-term delivery, but evidence for relationships with other outcomes such as low birth weight, stillbirth, congenital anomalies and semen quality is inconclusive and inconsistent. Major limitations in exposure assessment, small sample sizes and potential biases may account for the inconclusive and inconsistent results in epidemiological studies. Moreover, most studies have focused on total THMs as the exposure metric, whereas other DBPs appear to be more toxic than the THMs, albeit generally occurring at lower levels in the water. The mechanisms through which DBPs may cause adverse health effects including cancer and adverse reproductive effects have not been well investigated. Several mechanisms have been suggested, including genotoxicity, oxidative stress, disruption of folate metabolism, disruption of the synthesis and/or secretion of placental syncytiotrophoblast-derived chorionic gonadotropin and lowering of testosterone levels, but further work is required in this area.

  10. Control of disinfection by-product formation using ozone-based advanced oxidation processes.

    Science.gov (United States)

    Chen, Kuan-Chung; Wang, Yu-Hsiang

    2012-01-01

    The effects of ozone dosage, water temperature and catalyst addition in an ozonation-fluidized bed reactor (O3/FBR) on treated water quality and on the control of chlorinated and ozonated disinfection by-products (DBPs) were investigated. A biofiltration column was used to evaluate its removal efficiency on biodegradable organic matter and to reduce DBP formation. The Dong-Gang River, polluted by agricultural and domestic wastewater in Pingtung, Taiwan, was used as the water source. The treated water quality in terms of dissolved organic carbon (DOC), biodegradable DOC, ultraviolet absorbance at 254 nm (UV254) and specific UV absorbance (SUVA) improved with increasing ozone and catalyst dosages. Catalytic ozonation was more effective than ozonation alone at reducing the formation of DBPs at a given dosage. Experimental results show that water temperature had little effect on the treated water quality with the O3/FBR system used in this study (p > 0.05). The combination of O3/FBR and the biofiltration process effectively decreased the amount ofDBP precursors. The concentration of total trihalomethanes (TTHMs) was less than the maximum contaminant level (MCL) requirement, which is 80 microg/L, for all treated waters and the concentration of five haloacetic acids (HAA5) fell below 60 microg/L with an ozone dosage higher than 2.5 mg/L.

  11. Removal of disinfection by-product precursors with ozone-UV advanced oxidation process.

    Science.gov (United States)

    Chin, A; Bérubé, P R

    2005-05-01

    The efficacy of using ozone (O3), ultraviolet irradiation (UV) and the combined O3-UV advanced oxidation process (AOP) to remove 2 classes of disinfection by-product (DBP) precursors from raw surface water samples have been evaluated and compared. In particular, trihalomethane and haloacetic acids formation potentials were measured. Laboratory batch scale experiments were carried out as a function of ozone and UV dosage in order to study the removal kinetics. It is concluded that the combined O3-UV AOP is more effective than either the ozone or UV treatment alone. Ozone-UV AOP is capable of mineralizing up to 50% of the total organic carbon from the raw source water at an ozone dose of 0.62+/-0.019 mg O3/mL and a UV dose of 1.61 W s/cm2. In addition, O3-UV AOP can reduce trihalomethane formation potential by roughly 80% and haloacetic acids formation potential by roughly 70% at the same ozone and UV dosage.

  12. Addressing Facts and Gaps in the Phenolics Chemistry of Winery By-Products

    Directory of Open Access Journals (Sweden)

    Nelson F. L. Machado

    2017-02-01

    Full Text Available Grape and wine phenolics display a noticeable structural diversity, encompassing distinct compounds ranging from simple molecules to oligomers, as well as polymers usually designated as tannins. Since these compounds contribute critically to the organoleptic properties of wines, their analysis and quantification are of primordial importance for winery industry operators. Besides, the occurrence of these compounds has been also extensively described in winery residues, which have been pointed as a valuable source of bioactive phytochemicals presenting potential for the development of new added value products that could fit the current market demands. Therefore, the cumulative knowledge generated during the last decades has allowed the identification of the most promising compounds displaying interesting biological functions, as well as the chemical features responsible for the observed bioactivities. In this regard, the present review explores the scope of the existing knowledge, concerning the compounds found in these winery by-products, as well as the chemical features presumably responsible for the biological functions already identified. Moreover, the present work will hopefully pave the way for further actions to develop new powerful applications to these materials, thus, contributing to more sustainable valorization procedures and the development of newly obtained compounds with enhanced biological properties.

  13. Potential for methane production from typical Mediterranean agro-industrial by-products

    Energy Technology Data Exchange (ETDEWEB)

    Fountoulakis, M.S.; Drakopoulou, S.; Terzakis, S.; Georgaki, E.; Manios, T. [Laboratory of Solid Waste and Wastewater Management, School of Agricultural Technology, Technological Educational Institute of Crete, GR-71004 Iraklio, Crete (Greece)

    2008-02-15

    This work examines the potential for methane production from anaerobic co-digestion of olive mill wastewater and wine-grape residues with slaughterhouse wastewater. Continuous (mesophilic) and batch (mesophilic and thermophilic) experiments were studied, both with the separate types of by-products and with mixtures. Methane yields from olive oil wastewater, winery residues and slaughterhouse wastewater were 108, 147 and 297 L CH{sub 4} kg{sup -1} COD fed respectively. Co-digestion with 50% olive oil wastewater and 50% slaughterhouse wastewater or 50% winery residues gave a methane yield of 184 and 214 L CH{sub 4} kg{sup -1} COD, respectively. Furthermore, the methane yield was 188 L CH{sub 4} kg{sup -1} COD added, co-digesting a mixture of 50% winery residues and slaughterhouse wastewater. Finally, the same mixtures under thermophilic conditions gave methane yields of 282, 301 and 219 L CH{sub 4} kg{sup -1} COD, respectively. These results suggest that methane can be produced very efficiently by co-digesting olive oil wastewater, wine-grape residues and slaughterhouse wastewater. (author)

  14. Application of by-products in the development of foodstuffs for particular nutritional uses

    Directory of Open Access Journals (Sweden)

    Stanislava Matejová

    2016-12-01

    Full Text Available The aim of this work was to test potential by-product utilization in the development of foodstuffs for people intolerant for gluten. In this work were used three kinds of pomace – apple, buckwheat and grape (varieties Alibernet and Cabernet. Obtained dried pomace was applied into the baking products in ratio 5%, 10% and 15%. Apple and buckwheat pomace were applied into the breads and grape pomace were used in biscuits. The obtained products were sensory evaluated and texture analysis was used for determination of firmness. In terms of overall quality of tested breads, the evaluators indicated that bread with 5% addition of buckwheat pomace was the sample with the highest quality and from biscuit category products with 5% addition of grape pomace (Alibernet were shown to be the best. Regarding the texture determination the highest firmness showed a control sample in the case of biscuits and with the addition of pomace into the biscuits product firmness decreased. Contrary, in case of breads with the addition of pomace, the firmness increased. The results of texture analysis were statistically evaluated by non-parametric Wilcoxon test, among the samples there was no statistical significant difference found.

  15. Evaluation of several microcrystalline celluloses obtained from agricultural by-products

    Directory of Open Access Journals (Sweden)

    John Rojas

    2011-01-01

    Full Text Available Microcrystalline cellulose (MCCI has been widely used as an excipient for direct compression due to its good flowability, compressibility, and compactibility. In this study, MCCI was obtained from agricultural by-products, such as corn cob, sugar cane bagasse, rice husk, and cotton by pursuing acid hydrolysis, neutralization, clarification, and drying steps. Further, infrared spectroscopy (IR, X-ray diffraction (XRD, optical microscopy, degree of polymerization (DP, and powder and tableting properties were evaluated and compared to those of Avicel PH101, Avicel PH102, and Avicel PH200. Except for the commercial products, all materials showed a DP from 55 to 97. Particles of commercial products and corn cob had an irregular shape, whereas bagasse particles were elongated and thick. Rice and cotton particles exhibited a flake-like and fiber-like shape, respectively. MCCI as obtained from rice husk and cotton was the most densified material, while that produced from corn cob and bagasse was bulky, porous, and more compressible. All products had a moisture content of less than 10% and yields from 7.4% to 60.4%. MCCI as obtained from bagasse was the most porous and compressible material among all materials. This product also showed the best tableting properties along with Avicel products. Likewise, all MCCI products obtained from the above-mentioned sources showed a more rapid disintegration time than that of Avicel products. These materials can be used as a potential source of MCCI in the production of solid dosage forms.

  16. Chitin and chitosan from the Norway lobster by-products: Antimicrobial and anti-proliferative activities.

    Science.gov (United States)

    Sayari, Nadhem; Sila, Assaâd; Abdelmalek, Baha Eddine; Abdallah, Rihab Ben; Ellouz-Chaabouni, Semia; Bougatef, Ali; Balti, Rafik

    2016-06-01

    Chitin was recovered through enzymatic deproteinization of the Norway lobster (Nephrops norvegicus) processing by-products. The obtained chitin was characterized and converted into chitosan by N-deacetylation, the acid-soluble form of chitin. Chitosan samples were then characterized by Fourier transform infrared spectroscopy (FTIR) and 13 Cross polarization magic angle spinning nuclear magnetic resonance (CP/MAS)-NMR spectroscopy. The antimicrobial activity and anti-proliferative capacity of chitosan were evaluated. Antimicrobial activity assays indicated that prepared chitosan exhibited marked inhibitory activity against the bacterial and fungal strains tested. Further, cytotoxic effects of chitosan samples on human colon carcinoma cells HCT116 was evaluated using the MTT assay. Chitosan showed the antiproliferative capacity against the colon-cancer-cell HCT116 in a dose dependent manner with IC50 of 4.6mg/ml. Indeed, HCT116 cell proliferation was significantly inhibited (p<0.05) between 13.5 and 67.5% at 0.5-6mg/mL of chitosan after 24h of cell treatment. The chitosan showed high antitumor activity which seemed to be dependent on its characteristics such as acetylation degree.

  17. Production of bioethanol and associated by-products from potato starch residue stream by Saccharomyces cerevisiae

    Energy Technology Data Exchange (ETDEWEB)

    Hashem, Mohamed [King Khalid University, Faculty of Science, Biological Science Department, P.O. Box 10255, Abha 61321 (Saudi Arabia); Darwish, Soumia M.I. [Department of Food Science and Technology, Faculty of Agriculture, Assiut University (Egypt)

    2010-07-15

    Potato starch residue stream produced during chips manufacturing was used as an economical source for biomass and bioethanol production by Saccharomyces cerevisiae. Results demonstrated that 1% H{sub 2}SO{sub 4} at 100 C for 1 h was enough to hydrolyze all starch contained in the residue stream. Two strains of S. cerevisiae (y-1646 and commercial one) were able to utilize and ferment the acid-treated residue stream under both aerobic and semi-anaerobic conditions. The maximum yield of ethanol (5.52 g L{sup -1}) was achieved at 35 C by S. cerevisiae y-1646 after 36 h when ZnCl{sub 2} (0.4 g L{sup -1}) was added. Addition of NH{sub 4}NO{sub 3} as a source of nitrogen did not significantly affect either growth or ethanol production by S. cerevisiae y-1646. Some secondary by-products including alcohol derivatives and medical active compound were found to be associated with the ethanol production process. (author)

  18. Evaluation of several microcrystalline celluloses obtained from agricultural by-products.

    Science.gov (United States)

    Rojas, John; Lopez, Alvin; Guisao, Santiago; Ortiz, Carlos

    2011-07-01

    Microcrystalline cellulose (MCCI) has been widely used as an excipient for direct compression due to its good flowability, compressibility, and compactibility. In this study, MCCI was obtained from agricultural by-products, such as corn cob, sugar cane bagasse, rice husk, and cotton by pursuing acid hydrolysis, neutralization, clarification, and drying steps. Further, infrared spectroscopy (IR), X-ray diffraction (XRD), optical microscopy, degree of polymerization (DP), and powder and tableting properties were evaluated and compared to those of Avicel PH101, Avicel PH102, and Avicel PH200. Except for the commercial products, all materials showed a DP from 55 to 97. Particles of commercial products and corn cob had an irregular shape, whereas bagasse particles were elongated and thick. Rice and cotton particles exhibited a flake-like and fiber-like shape, respectively. MCCI as obtained from rice husk and cotton was the most densified material, while that produced from corn cob and bagasse was bulky, porous, and more compressible. All products had a moisture content of less than 10% and yields from 7.4% to 60.4%. MCCI as obtained from bagasse was the most porous and compressible material among all materials. This product also showed the best tableting properties along with Avicel products. Likewise, all MCCI products obtained from the above-mentioned sources showed a more rapid disintegration time than that of Avicel products. These materials can be used as a potential source of MCCI in the production of solid dosage forms.

  19. Fatty acids and algal lipids as precursors of chlorination by-products

    Institute of Scientific and Technical Information of China (English)

    Yan Liang; Yuen Shan Lui; Huachang Hong

    2012-01-01

    Six common algal fatty acids (FAs) with different numbers of double bonds,lipophilic fractions and proteins extracted from the diatom Navicula pelliculosa and algal cells were chlorinated to evaluate their potential in generating disinfection by-products (DBPs).The result showed that the more double bonds in the FAs,the higher the amounts of chloroform and dichloroacetic acid (DCAA) produced,but such a pattern was not observed for trichloroacetic acid (TCAA).Based on the previously reported composition of fatty acids in algal lipids,the DBP generation potentials of algal lipids were calculated.These predicted values were much lower than those measured in the chlorinated algal lipophilic fraction,suggesting unknown lipophilic fraction(s) served as potent DBPs precursors.Another calculation attempted to predict DBP production in algal cells based on algal lipid and protein composition,given quantified measured DBP production per unit algal lipid and proteins.The analysis showed that the observed DBP production was similar to that predicted (< 35% difference),suggesting that algal biochemical compositions may serve as a bioindicator for preliminary estimation of chloroform,DCAA and TCAA formation upon chlorinating algae.

  20. Detection of genotoxic effects of drinking water disinfection by-products using Vicia faba bioassay.

    Science.gov (United States)

    Hu, Yu; Tan, Li; Zhang, Shao-Hui; Zuo, Yu-Ting; Han, Xue; Liu, Na; Lu, Wen-Qing; Liu, Ai-Lin

    2017-01-01

    Plant-based bioassays have gained wide use among the toxicological and/or ecotoxicological assessment procedures because of their simplicity, sensitivity, low cost, and reliability. The present study describes the use of Vicia faba (V. faba) micronucleus (MN) test and V. faba comet assay in the evaluation of the genotoxic potential of disinfection by-products (DBPs) commonly found in chlorine-disinfected drinking water. Five haloacetic acids and three halogenated acetonitriles were chosen as representatives of DBPs in this study because they are of potentially great public health risk. Results of the MN test indicated that monochloroacetic acid (MCA), monobromoacetic acid (MBA), dichloroacetic acid (DCA), dibromoacetic acid (DBA), trichloroacetic acid (TCA), and trichloroacetonitrile (TCAN) caused a statistically significant increase in MN frequency in V. faba root tip cells. However, no genotoxic response was observed for dichloroacetonitrile (DCAN) and dibromoacetonitrile (DBAN). Results of the comet assay showed that all tested DBPs induced a statistically significant increase in genomic DNA damage to V. faba root tip cells. On considering the capacity to detect genomic damage of a different nature, we suggest that a combination of V. faba MN test and V. faba comet assay is a useful tool for the detection of genotoxic effects of DBPs. It is worthy of assessing the feasibility of using V. faba comet assay combined with V. faba MN test to screen for the genotoxic activity of chlorinated drinking water in future work.

  1. [Hygienic assessment of drinking water chlorination by-products in view of multiroute exposure].

    Science.gov (United States)

    Egorova, N A; Bukshuk, A A; Krasovskiy, G N

    2013-01-01

    On the example of threstationary sampling points in houses of the Western Administrative District data on presence of trihalomethanes (TGM)--the main by-products of chlorination--in cold drinking and hot tap water of Moscow were analyzed. Since 'tthe middle of 2007 the concentration of chloroform and other TGM in tests of tap water were established to be defined at levels steadily below hygienic maximum concentration limits. In the performed experiments it is revealed that, despite rather low content of chloroform in water, when using a hot shower considerable receipt of substance in air of the bathing room--in the concentration exceeding average daily maximum concentration limit in atmospheric air is possible. In calculations by the three methods of chloroform doses which can influence the person in living conditions, inhalation receipt was shown to be less if compared with an peroral way (with drinking water) and absorption through skin appear and can make the greatest contribution to the general complex loading of chloroform.

  2. Anaerobic biodegradability of Category 2 animal by-products: methane potential and inoculum source.

    Science.gov (United States)

    Pozdniakova, Tatiana A; Costa, José C; Santos, Ricardo J; Alves, M M; Boaventura, Rui A R

    2012-11-01

    Category 2 animal by-products that need to be sterilized with steam pressure according Regulation (EC) 1774/2002 are studied. In this work, 2 sets of experiments were performed in mesophilic conditions: (i) biomethane potential determination testing 0.5%, 2.0% and 5.0% total solids (TS), using sludge from the anaerobic digester of a wastewater treatment plant as inoculum; (ii) biodegradability tests at a constant TS concentration of 2.0% and different inoculum sources (digested sludge from a wastewater treatment plant; granular sludge from an upflow anaerobic sludge blanket reactor; leachate from a municipal solid waste landfill; and sludge from the slaughterhouse wastewater treatment anaerobic lagoon) to select the more adapted inoculum to the substrate in study. The higher specific methane production was of 317 mL CH(4)g(-1) VS(substrate) for 2.0% TS. The digested sludge from the wastewater treatment plant led to the lowest lag-phase period and higher methane potential rate. Copyright © 2012 Elsevier Ltd. All rights reserved.

  3. Integral process of obtaining glycerol as a by-product of biodiesel production from castor oil

    Directory of Open Access Journals (Sweden)

    Leonel Romero

    2012-12-01

    Full Text Available The biodiesel is obtained from about 10 years ago in Europe, and now that it has taken hold as fuel for diesel engines, it is expected a clear increase in the production of this class of fuels in a the near future. The biodiesel is derived from the transesterification reaction of castor oil with methanol, which is the main by-product the glycerol with an approximate content of 10%. Besides catalyst residuals, soaps, methanol traces, mono and diglycerides in small percentages are presented. This study proposes the separation, purification and characterization of the glycerol obtained from the transesterificación reaction of the castor oil, in order to be able to market it in the national or international market, so that it fulfills the standards of quality, which means getting a pure glycerol and the appropriate physico-chemical characteristics and techniques. The glycerin-methyl esters separation is carried out by decantation being obtained a percentage of around 70% glycerol. This percentage is subsequently increased through the purification process, using hydrochloric acid. Glycerol characterization was carried out by physicochemical and organoleptic tests. The purification process allowed us to obtain a glycerol with a percentage of purity close to 98%. It was also tested by comparison with theoretical data that remnants influenced in the physiochemical properties

  4. Use of coal combustion by-products for solidification/stabilization of hazardous wastes

    Energy Technology Data Exchange (ETDEWEB)

    Hassett, D.J.; Pflughoeft-Hassett, D.F.

    1997-05-01

    Five low-rank coal combustion fly ash samples extensively characterized in previous projects were used as a pool of candidate materials for potential use as waste stabilization agents. Two of these fly ash samples were selected because ettringite formed in the solid in long-term leaching experiments, and an associated reduction in leachate concentration of at least one trace element was noted for each sample. The stabilization experiments were designed to evaluate the removal of relatively high concentrations of boron and selenium from a simulated wastewater. Sulfate was added as one variable in order to determine if high concentrations of sulfate would impact the ability of the ettringite to include trace elements in its structure. The following conclusions can be drawn from the information obtained in this research: CCBs (coal combustion by-products) can be useful in the chemical fixation of potentially hazardous trace elements; indication of ettringite formation alone is not adequate for selecting a CCB for waste stabilization applications; moderate sulfate concentrations do not promote or inhibit trace element sorption; ettringite formation mechanisms may impact trace element fixation and need to be elucidated; laboratory demonstration of the CCB with the stabilization process being proposed is necessary to verify the efficacy of the material and process; and the final waste form must be evaluated prior to management according to the required regulatory procedures.

  5. Formation of disinfection by-products in the ultraviolet/chlorine advanced oxidation process.

    Science.gov (United States)

    Wang, Ding; Bolton, James R; Andrews, Susan A; Hofmann, Ron

    2015-06-15

    Disinfection by-product (DBP) formation may be a concern when applying ultraviolet light and free chlorine (UV/chlorine) as an advanced oxidation process (AOP) for drinking water treatment, due to typically large chlorine doses (e.g. 5-10 mg L(-1) as free chlorine). A potential mitigating factor is the low chlorine contact times for this AOP treatment (e.g. seconds). Full-scale and pilot-scale test results showed minimal trihalomethane (THM) and haloacetic acid (HAA) formation during UV/chlorine treatment, while dichloroacetonitrile (DCAN) and bromochloroacetonitrile (BCAN) were produced rapidly. Adsorbable organic halide (AOX) formation was significant when applying the UV/chlorine process in water that had not been previously chlorinated, while little additional formation was observed in prechlorinated water. Chlorine photolysis led to chlorate and bromate formation, equivalent to approximately 2-17% and 0.01-0.05% of the photolyzed chlorine, respectively. No perchlorate or chlorite formation was observed. During simulated secondary disinfection of AOP-treated water, DBP formation potential for THMs, HAAs, HANs, and AOX was observed to increase approximately to the same extent as was observed for pretreatment using the more common AOP of UV combined with hydrogen peroxide (UV/H2O2).

  6. Tracking disinfection by-products and arsenic removal during various drinking water treatment trains.

    Science.gov (United States)

    Tubić, Aleksandra; Dalmacija, Bozo; Agbaba, Jasmina; Ivancev-Tumbas, Ivana; Klasnja, Mile; Dalmacija, Milena

    2010-01-01

    In the central Banat region (Northern Serbia), groundwater is used as a drinking water source. Raw water originates from a 40-80 m and 100-150 m deep layer. It contains a high amount of natural organic matter (DOC = 9.17+/-0.87 mg C/L) with a trihalomethanes formation potential of 448+/-88.2 microg/L and a haloacetic acid formation potential of 174+/-68.9 microg/L. A high amount of arsenic (86.0+/-3.4 microg/L) is also found in this water. This study used a pilot-scale system to investigate the possibilities of combining polyaluminium chloride and ferrous-chloride to remove disinfection by-products precursors and arsenic by coagulation. Two treatment trains with different pre-treatment steps were investigated (ozone vs. H2O2/O3). For the final water polishing, filtration with granulated activated carbon (GAC) was applied. Both investigated treatment lines achieved a satisfactory chemical water quality. Simulation of disinfection conditions was performed and the contents of trihalomethanes and haloacetic acids measured, to investigate whether the chemical quality of the water remained satisfactory over a 48 hour period.

  7. Occurrence and control of nitrogenous disinfection by-products in drinking water--a review.

    Science.gov (United States)

    Bond, Tom; Huang, Jin; Templeton, Michael R; Graham, Nigel

    2011-10-01

    The presence of nitrogenous disinfection by-products (N-DBPs), including nitrosamines, cyanogen halides, haloacetonitriles, haloacetamides and halonitromethanes, in drinking water is of concern due to their high genotoxicity and cytotoxicity compared with regulated DBPs. Occurrence of N-DBPs is likely to increase if water sources become impacted by wastewater and algae. Moreover, a shift from chlorination to chloramination, an option for water providers wanting to reduce regulated DBPs such as trihalomethanes (THMs) and haloacetic acids (HAAs), can also increase certain N-DBPs. This paper provides a critical review of the occurrence and control of N-DBPs. Data collated from surveys undertaken in the United States and Scotland were used to calculate that the sum of analysed halonitromethanes represented 3-4% of the mass of THMs on a median basis; with Pearson product moment correlation coefficients of 0.78 and 0.83 between formation of dihaloacetonitriles and that of THMs and HAAs respectively. The impact of water treatment processes on N-DBP formation is complex and variable. While coagulation and filtration are of moderate efficacy for the removal of N-DBP precursors, such as amino acids and amines, biofiltration, if used prior to disinfection, is particularly successful at removing cyanogen halide precursors. Oxidation before final disinfection can increase halonitromethane formation and decrease N-nitrosodimethylamine, and chloramination is likely to increase cyanogen halides and NDMA relative to chlorination. Copyright © 2011 Elsevier Ltd. All rights reserved.

  8. Biochemical and Functional Properties of Sardinella (Sardinella aurita By-Product Hydrolysates

    Directory of Open Access Journals (Sweden)

    Ali Bougatef

    2007-01-01

    Full Text Available Fish protein hydrolysates (FPHs with different degrees of hydrolysis (DH of 6.62, 9.31 and 10.16 were prepared from heads and viscera of sardinella (Sardinella aurita by treatment with Alcalase®. The liquid hydrolysates were spray dried. All spray dried by-product hydrolysates contained 73 to 75 % of proteins and low content of lipids. Reversed-phase HPLC profiles showed that low DH hydrolysates contained high hydrophobic peptides and the extent of hydrolysis resulted in an increase of fish hydrophilic peptides. Some functional properties of FPHs were assessed and compared with those of casein or the undigested sardinella protein. Solubility increased while emulsifying capacity and whippability decreased with the increase in the degree of hydrolysis. The product, with a DH of 10.16 %, had an excellent solubility (100 % over a pH range of 6.0–10.0. The antioxidant activity of the hydrolysates was also tested. All FPHs exhibited more than 50 % inhibition of linoleic acid peroxidation. The antioxidant activity of FPH with 10.16 % DH was about 73 % of that of α-tocopherol, a natural antioxidative agent.

  9. High-pressure assisted extraction of bioactive compounds from industrial fermented fig by-product.

    Science.gov (United States)

    Alexandre, Elisabete M C; Araújo, Paula; Duarte, Maria F; de Freitas, Victor; Pintado, Manuela; Saraiva, Jorge A

    2017-07-01

    High-pressure assisted extraction was employed to obtain fig by-product derived extracts and its impact was evaluated on antioxidant activity and total phenolic, tannin, and flavonoid. A Box-Behnken design was applied to evaluate the effects of pressure, extraction time and ethanol concentration on extractions and optimal conditions were estimated by response surface methodology. The correlation analysis of the mathematical-regression model indicated that a quadratic polynomial model could be employed to optimize the high pressure extraction of compounds. Only the models developed for total antioxidant activity by DPPH (·) and for total flavonoids presented coefficient determinations lower than 0.95. From response surface plots, pressure, extraction time and ethanol concentration showed independent and interactive effects. The optimal conditions included 600 MPa, an extraction time between 18 and 29 min, depending on the parameter analyzed and a low ethanol concentration (extracts performed at 0.1 MPa. Analysis of variance indicated a high goodness of fit of the models used and the adequacy of response surface methodology for optimizing high pressure extraction.

  10. Properties of chars obtained with pyrolysis of Castanea sativa by product

    Directory of Open Access Journals (Sweden)

    Pehlivan Eylem

    2017-01-01

    Full Text Available The application of biomass derived energy is gaining importance due to the decreasing supply of fossil fuels and growing environmental concerns. This study described the possibility of utilizing Castanea sativa’s by-product as biofuels by producing char via pyrolysis. The process was carried out in a fixed-bed reactor at different heating rates of 10°C, 100°C, and 200°C per minute at temperatures ranging from 400°C to 700°C, and a nitrogen flow rate of 100 cm3 per minute. The produced chars were characterized by proximate and elemental analyses, Brunauer-Emmett-Teller surface area, nuclear magnetic resonance, scanning electron microscopy, Fourier transform infrared spectroscopy, X-ray diffraction, and X-ray fluorescence analyses. The char yield was found to decrease as both pyrolysis temperature and heating rate increases. The carbon content of char ranged from 68 to 87 wt.%, which correspond to approximately 43% of carbon in the biomass. The char obtained at 700°C had high fixed carbon content (79.90% as well as high heating value, and hence, it could be used as a solid fuel or as a precursor in the activated carbon production with its 268 m2 per gram surface area.

  11. Disinfection by-products in filter backwash water: implications to water quality in recycle designs.

    Science.gov (United States)

    McCormick, N J; Porter, M; Walsh, M E

    2010-08-01

    The overall purpose of this research was to investigate disinfection by-product (DBP) concentrations and formation potential in filter backwash water (FBWW) and evaluate at bench-scale the potential impact of untreated FBWW recycle on water quality in conventional drinking water treatment. Two chlorinated organic compound groups of DBPs currently regulated in North America were evaluated, specifically trihalomethanes (THMs) and haloacetic acids (HAAs). FBWW samples were collected from four conventional filtration water treatment plants (WTP) in Nova Scotia, Canada, in three separate sampling and plant audit campaigns. THM and HAA formation potential tests demonstrated that the particulate organic material contained within FBWW is available for reaction with chlorine to form DBPs. The results of the study found higher concentrations of TTHMs and HAA9s in FBWW samples from two of the plants that target a higher free chlorine residual in the wash water used to clean the filters (e.g., clearwell) compared to the other two plants that target a lower clear well free chlorine residual concentration. Bench-scale experiments showed that FBWW storage time and conditions can impact TTHM concentrations in these waste streams, suggesting that optimization opportunities exist to reduce TTHM concentrations in FBWW recycle streams prior to blending with raw water. However, mass balance calculations demonstrated that FBWW recycle practice by blending 10% untreated FBWW with raw water prior to coagulation did not impact DBP concentrations introduced to the rapid mix stage of a plant's treatment train.

  12. Modulation of brown adipocyte activity by milk by-products: Stimulation of brown adipogenesis by buttermilk.

    Science.gov (United States)

    Asano, Hiroki; Kida, Ryosuke; Muto, Kengo; Nara, Takayuki Y; Kato, Ken; Hashimoto, Osamu; Kawada, Teruo; Matsui, Tohru; Funaba, Masayuki

    2016-12-01

    Brown adipocytes dissipate chemical energy in the form of heat through the expression of mitochondrial uncoupling protein 1 (Ucp1); Ucp1 expression is further upregulated by the stimulation of β-adrenergic receptors in brown adipocytes. An increase in energy expenditure by activated brown adipocytes potentially contributes to the prevention of or therapeutics for obesity. The present study examined the effects of milk by-products, buttermilk and butter oil, on brown adipogenesis and the function of brown adipocytes. The treatment with buttermilk modulated brown adipogenesis, depending on the product tested; during brown adipogenesis, buttermilk 1 inhibited the differentiation of HB2 brown preadipocytes. In contrast, buttermilk 3 and 5 increased the expression of Ucp1 in the absence of isoproterenol (Iso), a β-adrenergic receptor agonist, suggesting the stimulation of brown adipogenesis. In addition, the Iso-induced expression of Ucp1 was enhanced by buttermilk 2 and 3. The treatment with buttermilk did not affect the basal or induced expression of Ucp1 by Iso in HB2 brown adipocytes, except for buttermilk 5, which increased the basal expression of Ucp1. Conversely, butter oil did not significantly affect the expression of Ucp1, irrespective of the cell phase of HB2 cells, ie, treatment during brown adipogenesis or of brown adipocytes. The results of the present study indicate that buttermilk is a regulator of brown adipogenesis and suggest its usefulness as a potential food material for antiobesity.

  13. The trapping characteristic of low density polyethylene in the presence of crosslinking by-products

    Science.gov (United States)

    Hussin, Nuriziani; Chen, George

    2009-08-01

    The by-products of dicumyl peroxide (DCP) from the crosslinking process such as acetophenone, cumyl alcohol and α-methylstyrene are said to be the sources of space charge formation in XLPE cable due to deep traps in the chemicals. However, by using space-charge-experimental approach, it appeared that these chemicals show a different trapping nature. This paper is intended to present this approach. Additive-free low density polyethylene (LDPE) was used as base material so that each chemical can be tested individually. Space charge measurement was done using the pulse electroacoustic (PEA) method. All results were compared to the clean LDPE to identify the contribution of the chemicals to the trapping characteristic. The data collected supported that although the chemicals introduce charge in the insulator, the charge decay is extremely fast especially in the presence of α-methylstyrene. It is believed that the chemicals modify the trapping characteristic of LDPE so that more shallow traps are formed in the insulator.

  14. The trapping characteristic of low density polyethylene in the presence of crosslinking by-products

    Energy Technology Data Exchange (ETDEWEB)

    Hussin, Nuriziani; Chen, George, E-mail: nh07r@ecs.soton.ac.u [School of Electronics and Computer Science University Of Southampton, SO16 1BJ (United Kingdom)

    2009-08-01

    The by-products of dicumyl peroxide (DCP) from the crosslinking process such as acetophenone, cumyl alcohol and {alpha}-methylstyrene are said to be the sources of space charge formation in XLPE cable due to deep traps in the chemicals. However, by using space-charge-experimental approach, it appeared that these chemicals show a different trapping nature. This paper is intended to present this approach. Additive-free low density polyethylene (LDPE) was used as base material so that each chemical can be tested individually. Space charge measurement was done using the pulse electroacoustic (PEA) method. All results were compared to the clean LDPE to identify the contribution of the chemicals to the trapping characteristic. The data collected supported that although the chemicals introduce charge in the insulator, the charge decay is extremely fast especially in the presence of {alpha}-methylstyrene. It is believed that the chemicals modify the trapping characteristic of LDPE so that more shallow traps are formed in the insulator.

  15. Biofuel Production by Fermentation of Water Plants and Agricultural Lignocellulosic by-Products

    Directory of Open Access Journals (Sweden)

    Anker Yaakov

    2016-01-01

    Full Text Available While at present most energy crops are depriving human feedstock, fermentation of agricultural residues and fast growing water plants possesses a good prospect to become a significant source for bio-fuel; as both substrates are widely available and do not require agricultural areas. Water hyacinth for instance can be cultivated in fresh, brackish or wastewater and owing to its rapid growth and availability. Since owing to its natural abundance it is considered to be an invasive plant in most continents, its utilization and use as a renewable energy source may also contribute for its dilution and control. Agricultural lignocellulosic surplus by-products are also a promising fermentable substrate for bioethanol production, as it decreases both disposal expenses and greenhouse gases emissions. This paper describes a scheme and methodology for transformation of any lignocellulosic biomass into biofuel by simple cost effective operation scheme, integrating an innovative process of mechanochemical activation pre-treatment followed by fermentation of the herbal digest and ethanol production through differential distillation. Under this approach several complex and costly staged of conventional ethanol production scheme may be replaced and by genetic engineering of custom fermenting microorganisms the fermentation process becomes a fully continuous industrial process.

  16. Development and characterization of a new encapsulating agent from orange juice by-products.

    Science.gov (United States)

    Kaderides, Kyriakos; Goula, Athanasia M

    2017-10-01

    The replacement of maltodextrins as carriers for the spray drying of sticky and sugar based bioactives is an important development for the food industry. In this work, orange juice industry by-product was used to obtain a high dietary fiber powder to be used as carrier material. This powder was characterized with respect to its physical and chemical properties related to the process of encapsulation by spray drying. Adsorption isotherms of orange waste powder were determined at 30, 45, and 60°C. The data were fitted to several models including two-parameter (BET, Halsey, Smith, and Oswin), three-parameter (GAB), and four-parameter (Peleg) relationships. The GAB model best fitted the experimental data. The isosteric heat of sorption was determined from the equilibrium sorption data using the Clausius-Clapeyron equation. Isosteric heats of sorption were found to decrease exponentially with increasing moisture content. The enthalpy-entropy compensation theory was applied to the sorption isotherms and indicated an enthalpy controlled sorption process. Glass transition temperatures (Tg) of orange waste powder conditioned at various water activities were determined and a strong plasticizing effect of water on Tg was found. These data were satisfactory correlated by the Gordon and Taylor model. The critical water activity and moisture content for the orange waste powder were 0.82 and 0.18g water/g solids, respectively, at a storage temperature of 25°C. Copyright © 2017 Elsevier Ltd. All rights reserved.

  17. The global contribution of energy consumption by product exports from China.

    Science.gov (United States)

    Tang, Erzi; Peng, Chong

    2017-06-01

    This paper presents a model to analyze the mechanism of the global contribution of energy usage by product exports. The theoretical analysis is based on the perspective that contribution estimates should be in relatively smaller sectors in which the production characteristics could be considered, such as the productivity distribution for each sector. Then, we constructed a method to measure the global contribution of energy usage. The simple method to estimate the global contribution is the percentage of goods export volume compared to the GDP as a multiple of total energy consumption, but this method underestimates the global contribution because it ignores the structure of energy consumption and product export in China. According to our measurement method and based on the theoretical analysis, we calculated the global contribution of energy consumption only by industrial manufactured product exports in a smaller sector per industry or manufacturing sector. The results indicated that approximately 42% of the total energy usage in the whole economy for China in 2013 was contributed to foreign regions. Along with the primary products and service export in China, the global contribution of energy consumption for China in 2013 by export was larger than 42% of the total energy usage.

  18. The influence of pomegranate by-product and punicalagins on selected groups of human intestinal microbiota.

    Science.gov (United States)

    Bialonska, Dobroslawa; Ramnani, Priya; Kasimsetty, Sashi G; Muntha, Kesava R; Gibson, Glenn R; Ferreira, Daneel

    2010-06-15

    We have examined the gut bacterial metabolism of pomegranate by-product (POMx) and major pomegranate polyphenols, punicalagins, using pH-controlled, stirred, batch culture fermentation systems reflective of the distal region of the human large intestine. Incubation of POMx or punicalagins with faecal bacteria resulted in formation of the dibenzopyranone-type urolithins. The time course profile confirmed the tetrahydroxylated urolithin D as the first product of microbial transformation, followed by compounds with decreasing number of phenolic hydroxy groups: the trihydroxy analogue urolithin C and dihydroxylated urolithin A. POMx exposure enhanced the growth of total bacteria, Bifidobacterium spp. and Lactobacillus spp., without influencing the Clostridium coccoides-Eubacterium rectale group and the C. histolyticum group. In addition, POMx increased concentrations of short chain fatty acids (SCFA) viz. acetate, propionate and butyrate in the fermentation medium. Punicalagins did not affect the growth of bacteria or production of SCFA. The results suggest that POMx oligomers, composed of gallic acid, ellagic acid and glucose units, may account for the enhanced growth of probiotic bacteria.

  19. Simultaneous Control of Microorganisms and Disinfection By-products by Sequential Chlorination

    Institute of Scientific and Technical Information of China (English)

    CHAO CHEN; XIAO-JIAN ZHANG; WEN-JIE HE; HONG-DA HAN

    2007-01-01

    Objective To introduce a new sequential chlorination disinfection process in which short-term free chlorine and chloramine are sequentially added. Methods Pilot tests of this sequential chlorination were carried out in a drinking water plant. Results The sequential chlorination disinfection process had the same or better efficiency on microbe (including virus)inactivation compared with the free chlorine disinfection process. There seemed to be some synergetic disinfection effect between free chlorine and monochloramine because they attacked different targets. The sequential chlorination disinfection process resulted in 35.7%-77.0% TTHM formation and 36.6%-54.8% THAA5 formation less than the free chlorination process.The poorer the water quality was, the more advantage the sequential chlorination disinfection had over the free chlorination.Conclusion This process takes advantages of free chlorine's quick inactivation of microorganisms and chloramine's low disinfection by-product (DBP) yield and long-term residual effect, allowing simultaneous control of microbes and DBPs in an effective and economic way.

  20. Production of durable and cost effective sewer pipes using petroleum and industrial waste by-products

    Directory of Open Access Journals (Sweden)

    El Gamal Maisa

    2017-01-01

    Full Text Available The Arabian Gulf environment has an adverse impact on concrete structures because of the high ambient temperature, humidity, salt contaminated dust, sea water and underground salts. As an innovative solution, reinforced modified sulfur concrete (MSC pipes are recognized as a durable and economical solution for deterioration of pipelines. This work describes the manufacture and characterization of new MSC based on a cost effective sulfur modification process. Bitumen, a by-product from crude oil refining process was used to modify elemental sulfur and enhance its physical, mechanical properties, and mostly to increase its corrosive resistivity. The study has focused on optimizing the proportions of an offered MSC mixes that are composed of modified sulfur (MS as a binder, crushed sand, dune sand and ladle furnace (LF slag as aggregates, and ground granulated blast furnace slag (GGFBS as a filler. To maximize the physical and mechanical properties of MSC sewer pipes, different mixtures were prepared and investigated. The optimum mix of MSC has a maximum compressive strength of 64 MPa, maximum splitting tensile strength of 4.5 MPa, maximum flexural strength of 21 MP, with a high corrosion resistance in acidic and salty environments.

  1. PHYTOAVAILABILITY OF COPPER IN INDUSTRIAL BY-PRODUCTS AND MINERAL FERTILIZERS

    Directory of Open Access Journals (Sweden)

    Camila Prado Cenciani de Souza

    2015-04-01

    Full Text Available Alternative copper (Cu sources could be used in fertilizer production, although the bioavailability of copper in these materials is unknown. The objective of this study was to evaluate the extractants neutral ammonium citrate (NAC, 2 % citric acid, 1 % acetic acid, 10 % HCl, 10 % H2SO4, buffer solution pH 6.0, DTPA, EDTA, water, and hot water in the quantification of available Cu content in several sources, relating them to the relative agronomic efficiency (RAE of wheat grown in a clayey Latossolo Vermelho eutrófico (Oxisol and Neossolo Quartzarênico (Typic Quartzipsamment. Copper was applied at the rate of 1.5 mg kg-1 as scrap slag, brass slag, Cu ore, granulated copper, and copper sulfate. The extractants 10 % HCl, 10 % H2SO4, and NAC extracted higher Cu concentrations. The RAE values of brass slag and Cu ore were similar to or higher than those of Cu sulfate and granulated Cu. Solubility in the 2nd NAC extractant, officially required for mineral fertilizers with Cu, was lower than 60 % for the scrap slag, Cu ore, and granulated copper sources. This fact indicates that adoption of the NAC extractant may be ineffective for industrial by-products, although no extractant was more efficient in predicting Cu availability for wheat fertilized with the Cu sources tested.

  2. In situ detection of lipid peroxidation by-products in chronic liver diseases.

    Science.gov (United States)

    Paradis, V; Kollinger, M; Fabre, M; Holstege, A; Poynard, T; Bedossa, P

    1997-07-01

    Lipid peroxidation is an autocatalytic mechanism leading to oxidative destruction of cellular membranes. The deleterious consequences of this mechanism are related in part to the formation of reactive aldehydic products that bind to intra- or extracellular molecules to form adducts. Specific antibodies directed against malondialdehyde (MDA) and 4-hydroxynonenal (HNE) adducts, major aldehydic metabolites of lipid peroxidation, allowed us to investigate in situ, with an immunohistochemical procedure, the occurrence of lipid peroxidation in a panel of different chronic liver diseases. Intracellular HNE and MDA adducts were detected respectively in 24 of 39 cases (62%) and in 12 of 34 cases investigated (35%). They were localized mainly in the cytoplasm of hepatocytes, with the strongest staining observed in hemochromatosis, Wilson's disease, and in areas of acute alcoholic hepatitis in cases of alcoholic liver diseases. A peculiar pattern of immunostaining was observed in primary biliary cirrhosis where biliary cells of destroyed but also intact bile ducts strongly expressed HNE adducts. The liver extracellular matrix also displayed MDA adducts (30 of 34 cases, 88%) and HNE adducts (23 of 39 cases, 59%). While HNE adducts were specifically localized on large bundles of collagen fibers, MDA adducts were detected in a thin reticular network and in sinusoidal cells around portal tracts or fibrous septa. In conclusion, lipid peroxidation by-products are detectable in chronic liver diseases. Immunohistochemical results suggest that this mechanism is implicated very early in the pathogenesis of some of these diseases.

  3. Removal of disinfection by-products formation potential by biologically intensified process

    Institute of Scientific and Technical Information of China (English)

    AN Dong; LI Wei-guang; CUI Fu-yi; HE Xin; ZHANG Jin-song

    2005-01-01

    The removal of disinfection by-products formation potential(DBPFP) in artificially intensified biological activated carbon(IBAC) process which is developed on the basis of traditional ozone granular activated carbon was evaluated. By IBAC removals of 31% and 68% for THMFP and HAAFP were obtained respectively. Under identical conditions, the removals of the same substances were 4% and 32% respectively only by the granular activated carbon(GAC) process. Compared with GAC, the high removal rates of the two formed potential substances were due to the increasing of bioactivity of the media and the synergistic capabilities of biological degradation cooperating with activated carbon adsorption of organic compounds. A clear linear correlation ( R2 = 0.9562 and R2 = 0.9007) between DOC HAAFP removal rate and Empty Bed Contact Time(EBCT) of IBAC process was observed, while that between THMFP removal rate and EBCT of GAC was R2 = 0.9782. In addition certain linear correlations between THMFP, HAAFP and UV254 ( R2 = 0.855 and R2 = 0.7702) were found for the treated water. For IBAC process there are also more advantages such as long backwashing cycle time, low backwashing intensity and prolonging activated carbon lifetime and so on.

  4. Ordinary Toxicity of Chlorine Dioxide and By-products Chlorite and Chlorate in Water

    Institute of Scientific and Technical Information of China (English)

    王丽; 常爱敏; 黄君礼

    2003-01-01

    Acute toxicity and accumulated toxicity of chlorine dioxide (C1O2) and by-products chlorite ( C1O-2 ) and chlorate (C1O-3) in water acted on mice are studied by the method of Horn and accumulation coefficient.Subchronic toxicity of the mixture of C1O2 and C1O-2 and ClO-3 in water acted on rat is studied though feeding test for 90 days, including statistical analysis of variance on weight gaining, food utilization efficiency, index of blood and serum, liver (or kidney)to body weight ratio, and histopathological examination on liver and kidney. The results show that aqueous solution of C1O2, NaC1O2 and NaC1O3 (with the concentration of 276. 5 mg/L, 200 mg/L and 200 mg/L respectively) and the mixed aqueous solution of C1O2 with the concentration of 553 mg/L are actually non poisonous, and non-cumulative aqueous solution as well.

  5. The utilization of biochemically modified microfibers from grain by-products as reinforcement for polypropylene biocomposite

    Directory of Open Access Journals (Sweden)

    A. K. Bledzki

    2014-10-01

    Full Text Available The presented research study aims to evaluate microfibers from grain by-products as a substitute for wood flour in wood-thermoplastic composites. Grain husks are an abundant and cheap source of annual, renewable raw material, which besides lignocellulose, may also contain substantial amounts of starch, proteins and fats. These grain residues may negatively affect the mechanical properties of their composites, and generate an odor when decomposition occurs at higher temperatures during plastics processing. Such odors may also be present in the end-product. In order to overcome this drawback, in this research study, a simple and effective enzymatic treatment is proposed. This environmental friendly process removed protein, starch and fats in selective manner. Treated microfibers have shown enhanced thermal stability for ca. 20°C at 1% of weight loss. This correlates with lower amount of odor emission during plastics processing as well as in the final, injection molded parts (25–65% decrease. The mechanical properties of composites were either preserved, or slightly improved. All results were compared to standard injection molded softwood WPC.

  6. CHRONIC EXPOSURE TO DIBROMOACETIC ACID, A WATER DISINFECTION BY-PRODUCT, DIMINISHES PRIMORDIAL FOLLICLES IN THE RABBIT

    Science.gov (United States)

    Exposure to dibromoacetic acid (DBA), a commonly occurring water disinfection by-product, has detrimental effects on spermatogenesis and fertility in rats and rabbits. Despite indications of important reproductive consequences of DBA exposure in males, reproductive sequelae follo...

  7. CHRONIC EXPOSURE TO DIBROMOACETIC ACID, A WATER DISINFECTION BY-PRODUCT, DIMINISHES PRIMORDIAL FOLLICLES IN THE RABBIT

    Science.gov (United States)

    Exposure to dibromoacetic acid (DBA), a commonly occurring water disinfection by-product, has detrimental effects on spermatogenesis and fertility in rats and rabbits. Despite indications of important reproductive consequences of DBA exposure in males, reproductive sequelae follo...

  8. Cryogenic treatment of gas

    Science.gov (United States)

    Bravo, Jose Luis [Houston, TX; Harvey, III, Albert Destrehan; Vinegar, Harold J [Bellaire, TX

    2012-04-03

    Systems and methods of treating a gas stream are described. A method of treating a gas stream includes cryogenically separating a first gas stream to form a second gas stream and a third stream. The third stream is cryogenically contacted with a carbon dioxide stream to form a fourth and fifth stream. A majority of the second gas stream includes methane and/or molecular hydrogen. A majority of the third stream includes one or more carbon oxides, hydrocarbons having a carbon number of at least 2, one or more sulfur compounds, or mixtures thereof. A majority of the fourth stream includes one or more of the carbon oxides and hydrocarbons having a carbon number of at least 2. A majority of the fifth stream includes hydrocarbons having a carbon number of at least 3 and one or more of the sulfur compounds.

  9. Thermoacoustic natural gas liquefier

    Energy Technology Data Exchange (ETDEWEB)

    Swift, G.; Gardner, D.; Hayden, M.; Radebaugh, R. [National Inst. of Standards and Technology, Gaithersburg, MD (United States); Wollan, J. [Cryenco, Inc. (United States)

    1996-07-01

    This is the final report of a two-year, Laboratory-Directed Research and Development (LDRD) project at the Los Alamos National Laboratory (LANL). This project sought to develop a natural-gas-powered natural-gas liquefier that has absolutely no moving parts and requires no electrical power. It should have high efficiency, remarkable reliability, and low cost. The thermoacoustic natural-gas liquefier (TANGL) is based on our recent invention of the first no-moving-parts cryogenic refrigerator. In short, our invention uses acoustic phenomena to produce refrigeration from heat, with no moving parts. The required apparatus comprises nothing more than heat exchangers and pipes, made of common materials, without exacting tolerances. Its initial experimental success in a small size lead us to propose a more ambitious application: large-energy liquefaction of natural gas, using combustion of natural gas as the energy source. TANGL was designed to be maintenance-free, inexpensive, portable, and environmentally benign.

  10. Cryogenic treatment of gas

    Energy Technology Data Exchange (ETDEWEB)

    Bravo, Jose Luis [Houston, TX; Harvey, III, Albert Destrehan (Kingwood, TX); Vinegar, Harold J [Bellaire, TX

    2012-04-03

    Systems and methods of treating a gas stream are described. A method of treating a gas stream includes cryogenically separating a first gas stream to form a second gas stream and a third stream. The third stream is cryogenically contacted with a carbon dioxide stream to form a fourth and fifth stream. A majority of the second gas stream includes methane and/or molecular hydrogen. A majority of the third stream includes one or more carbon oxides, hydrocarbons having a carbon number of at least 2, one or more sulfur compounds, or mixtures thereof. A majority of the fourth stream includes one or more of the carbon oxides and hydrocarbons having a carbon number of at least 2. A majority of the fifth stream includes hydrocarbons having a carbon number of at least 3 and one or more of the sulfur compounds.

  11. Understanding vented gas explosions

    Energy Technology Data Exchange (ETDEWEB)

    Lautkaski, R. [VTT Energy, Espoo (Finland). Energy Systems

    1997-12-31

    The report is an introduction to vented gas explosions for nonspecialists, particularly designers of plants for flammable gases and liquids. The phenomena leading to pressure generation in vented gas explosions in empty and congested rooms are reviewed. The four peak model of vented gas explosions is presented with simple methods to predict the values of the individual peaks. Experimental data on the external explosion of dust and gas explosions is discussed. The empirical equation relating the internal and external peak pressures in vented dust explosions is shown to be valid for gas explosion tests in 30 m{sup 3} and 550 m{sup 3} chambers. However, the difficulty of predicting the internal peak pressure in large chambers remains. Methods of explosion relief panel design and principles of vent and equipment layout to reduce explosion overpressures are reviewed. (orig.) 65 refs.

  12. Separation of Nitration By-Products in Commercial-Grade Trinitro-Toluene by High Performance Liquid Chromatography.

    Science.gov (United States)

    1982-06-01

    MRL-TN-464 SEPARATION OF NITRATION BY-PRODUCTS IN COMMERCIAL-GRADE TITR-TOLUENE BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY Peter J. Sanders ABSTRACT...UNCLASSIFIED TITLE SEPARATION OF NITRATION BY-PRODUCTS IN COMMERCIAL-GRADE TRXNITRO-TOLUENE BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY AUTHOR(S...PRODUCTS IN COMMERCIAL-GRADE TRINITRO-TOLUENE BY HIGH PERFORMANCE LIQUID CHROMATOGRAPHY 16 INTRODUCTION Fbr some time, a need has existed for the

  13. 9 CFR 355.42 - Marking of mule meat and animal food mule meat by-product.

    Science.gov (United States)

    2010-01-01

    ... 9 Animals and Animal Products 2 2010-01-01 2010-01-01 false Marking of mule meat and animal food mule meat by-product. 355.42 Section 355.42 Animals and Animal Products FOOD SAFETY AND INSPECTION... Meat and Animal Food, Mule Meat By-Product § 355.42 Marking of mule meat and animal food mule meat by...

  14. Halogenated by-products of disinfecting ozonised recreational waters; Subproductos halaogenados de desinfeccion en aguas recreacionales ozonizadas

    Energy Technology Data Exchange (ETDEWEB)

    Goma i Huguet, A.; Quintana i Comte, J.; Soler i Vilaro, J.

    2005-07-01

    Recreational water like the present in swimming pools suffers, more than water from supply, formation of certain by-products in the local disinfection system because a mechanism of accumulation. Using advanced oxidation process, like onization, drives to a reduction of such an effect. Assessment of the presence of these disinfection by-products with and without onization, as well as the discussion of certain key aspects of how to ozonate, are the aim of this paper. (Author) 7 refs.

  15. Developmental Toxicity of Drinking Water Disinfection By-Products to Embryos of the African Clawed Frog (Xenopus laevis)

    Science.gov (United States)

    2005-06-10

    developmental toxicity tests with embryos of the South African clawed frog Xenopus laevis used to evaluate four individual DWDB; bromodichloromethane...SUBJECT TERMS Developmental toxicity; FETAX; water disinfection by-products; frogs ; Xenopus laevis; embryo malformations; embryo mortality...Disinfection By-Products to Embryos of the African Clawed Frog (Xenopus laevis) L. M. Brennan,1 M. W. Toussaint,1 D. M. Kumsher,1 W. E. Dennis,’ A. B

  16. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel Morrison

    2005-09-14

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2005 through June 30, 2005. During this time period efforts were directed toward (1) GSTC administration changes, (2) participating in the American Gas Association Operations Conference and Biennial Exhibition, (3) issuing a Request for Proposals (RFP) for proposal solicitation for funding, and (4) organizing the proposal selection meeting.

  17. New challenges in gas

    Energy Technology Data Exchange (ETDEWEB)

    Mandil, C. [Institut Francais du Petrole (IFP), 92 - Rueil-Malmaison (France); Chabrelie, M.F. [Cedigaz, 92 - Rueil Malmaison (France); Streicher, C. [Prosernat, 92 - Paris la Defense (France)] [and others

    2003-07-01

    New developments in the area of gas treatment will be to a large extent driven by the need to find appropriate solutions to the fundamental need of sustainable development. New gas treatment processes are developed with the aim to minimise contaminant emissions and meet most stringent environmental specifications. A new major challenge for the industry will be to implement new cost effective technologies for reducing CO{sub 2} emissions. Industry has also to minimise its costs, and therefore, in order to ensure at the same time a better protection of the environment and a better safety, it is necessary to innovate. The purpose of this seminar is precisely to identify better the innovations which are required in the area of gas treatment. These proceedings comprise 8 papers and a summary of the contributions to a round-table discussion dealing with the options for CO{sub 2} capture and sequestration. The presentations treat of: the future prospects for the gas industry (M.F. Chabrelie, Cedigaz); the solutions for offshore gas treatment (C. Streicher, Prosernat); gas treatment with membranes (H. Meyer, GTI); the Axens Multibed{sub TM} technology for natural gas treatment (G. Jochem, Axens); the potentials and applications for the Propure co-current contactors (F.P. Nilsen, ProPure); the production of very-sour and super-sour large gas reserves: the new challenges (F. Lallemand, TotalFinaElf); Hybrisol, a new gas treatment process for sour natural gases (F. Lecomte, IFP); and the conception and building of large acid-gas removal units (J. Castel, Technip-Coflexip). (J.S.)

  18. Regulation of gas infrastructure expansion

    NARCIS (Netherlands)

    De Joode, J.

    2012-01-01

    The topic of this dissertation is the regulation of gas infrastructure expansion in the European Union (EU). While the gas market has been liberalised, the gas infrastructure has largely remained in the regulated domain. However, not necessarily all gas infrastructure facilities – such as gas storag

  19. Analysis of Organic and Inorganic Contaminants in Dried Sewage Sludge and By-Products of Dried Sewage Sludge Gasification

    Directory of Open Access Journals (Sweden)

    Sebastian Werle

    2014-01-01

    Full Text Available Organic and inorganic contaminants in sewage sludge may cause their presence also in the by-products formed during gasification processes. Thus, this paper presents multidirectional chemical instrumental activation analyses of dried sewage sludge as well as both solid (ash, char coal and liquid (tar by-products formed during sewage gasification in a fixed bed reactor which was carried out to assess the extent of that phenomenon. Significant differences were observed in the type of contaminants present in the solid and liquid by-products from the dried sewage sludge gasification. Except for heavy metals, the characteristics of the contaminants in the by-products, irrespective of their form (solid and liquid, were different from those initially determined in the sewage sludge. It has been found that gasification promotes the migration of certain valuable inorganic compounds from sewage sludge into solid by-products which might be recovered. On the other hand, the liquid by-products resulting from sewage sludge gasification require a separate process for their treatment or disposal due to their considerable loading with toxic and hazardous organic compounds (phenols and their derivatives.

  20. Catalytic hot gas cleaning of gasification gas

    Energy Technology Data Exchange (ETDEWEB)

    Simell, P. [VTT Energy, Espoo (Finland). Energy Production Technologies

    1997-12-31

    The aim of this work was to study the catalytic cleaning of gasification gas from tars and ammonia. In addition, factors influencing catalytic activity in industrial applications were studied, as well as the effects of different operation conditions and limits. Also the catalytic reactions of tar and ammonia with gasification gas components were studied. The activities of different catalyst materials were measured with laboratory-scale reactors fed by slip streams taken from updraft and fluid bed gasifiers. Carbonate rocks and nickel catalysts proved to be active tar decomposing catalysts. Ammonia decomposition was in turn facilitated by nickel catalysts and iron materials like iron sinter and iron dolomite. Temperatures over 850 deg C were required at 2000{sup -1} space velocity at ambient pressure to achieve almost complete conversions. During catalytic reactions H{sub 2} and CO were formed and H{sub 2}O was consumed in addition to decomposing hydrocarbons and ammonia. Equilibrium gas composition was almost achieved with nickel catalysts at 900 deg C. No deactivation by H{sub 2}S or carbon took place in these conditions. Catalyst blocking by particulates was avoided by using a monolith type of catalyst. The apparent first order kinetic parameters were determined for the most active materials. The activities of dolomite, nickel catalyst and reference materials were measured in different gas atmospheres using laboratory apparatus. This consisted of nitrogen carrier, toluene as tar model compound, ammonia and one of the components H{sub 2}, H{sub 2}O, CO, CO{sub 2}, CO{sub 2}+H{sub 2}O or CO+CO{sub 2}. Also synthetic gasification gas was used. With the dolomite and nickel catalyst the highest toluene decomposition rates were measured with CO{sub 2} and H{sub 2}O. In gasification gas, however, the rate was retarded due to inhibition by reaction products (CO, H{sub 2}, CO{sub 2}). Tar decomposition over dolomite was modelled by benzene reactions with CO{sub 2}, H

  1. Natural gas : nirvana

    Energy Technology Data Exchange (ETDEWEB)

    Stonehouse, D.

    2001-04-01

    Despite completing 8,900 gas wells in year 2000, the deliverability of natural gas out of the Western Canadian Sedimentary Basin (WCSB) was stagnant which has left many analysts wondering whether the basin has reached its limit. It also leaves many wondering if gas producers will be able to meet the strong demand for natural gas in the future. Nearly all new electrical generation being built in the U.S. is gas-based due to strict new environmental standards limiting the growth in hydro and coal-powered generation. Any future coal plants will use gasification technology and combined cycle turbines. Combined cycle turbines developed by Boeing and Lockheed are more efficient than combustion turbines, making gas more competitive with fuel alternatives. The lack of growth in natural gas supply has left storage levels near record lows. Demand is expected to increase in 2001 by 3.2 per cent to 23 trillion cubic feet in the U.S. Longer term, major new reserves must be brought on stream to meet this demand. It was noted that the easy discoveries within the WCSB have been made. The new plays are smaller, more technically complex and expensive which suggests that more investment is needed in training geologists, geophysicists and petroleum engineers to find new reserves. The Canadian Energy Research Institute agrees that there is enough gas in Alberta and British Columbia to meet current demands but efforts must shift towards drilling in the foothills front and northwest regions of Alberta to increase deliverability. Brief notes on several gas finds by various oil and gas companies in the area were presented. The article also discussed the huge untapped potential of northern reserves. Analysts have noted 44 Tcf of proven reserve, with a potential of 165 Tcf. In addition, new pipelines from the Alaskan North Slope and the Mackenzie Delta could transport nearly 2 Tcf annually to market. Wells drilled by Chevron and Paramount at Fort Liard in 1999 initially flowed at rates up to

  2. By-products from ethanol production - the forgotten part of the equation. Possibilities and challenges

    Energy Technology Data Exchange (ETDEWEB)

    Grinsted Jensen, H.; Bjoernsson, A.H.; Lind, K.M.

    2013-06-15

    Conventional bioethanol is produced from starch based feedstocks either via dry or wet milling, using typically maize or wheat. One by-product from bioethanol production is dried distiller's grain with solubles (DDGS), which has proven to be a valuable feed commodity for animal husbandry. Particularly, DDGS replaces expensive protein feed at a competitive price for farmers, which has hitherto led to a rapidly increasing market for distiller's grain with solubles in the US, who is by far the largest producer of grain-based bioethanol in the world. The US also exports DDGS since it has a long shelf-life and can therefore be shipped overseas. Exports of DDGS from the US are increasingly taking place with Asia but also Europe and South-America as international destinations. Studies indicate that the price of DDGS in the US follows the corn price and is roughly at the same price level, even though protein contents in distiller's grain with solubles are higher than for cereals. With this price relationship, feed diets incorporating DDGS produce cost savings for farmers. An example for a Danish dairy farm shows that with this price relationship profits would increase by around 5 % per dairy cow if DDGS is included in the fodder plan, accounting for roughly 10 % of the energy content. Given that the US exports large amounts of DDGS it would be expected that the price level in Denmark would be highly influenced by US export prices, if Danish farmers adopt DDGS in their feed rations. One major barrier for increased acceptance of DDGS by potential buyers/farmers is the absence of a standard for the product. Pre-tested and pre-blended food diets with DDGS could lead to greater certainty of effects and acceptance by farmers. This could presumably increase the price of DDGS from current levels, which is lower than the feed value appears to suggest, due to uncertainty around the product as well as varying quality of DDGS. When DDGS replaces traditional animal feed

  3. Biochars made from agro-industrial by-products remove chlorine and lower water toxicity

    Science.gov (United States)

    Tzachristas, Andreas; Xirou, Maria; Manariotis, Ioannis D.; Dailianis, Stefanos; Karapanagioti, Hrissi K.

    2016-04-01

    Chlorination is the most common disinfection process for water and treated wastewater. For the industrial use of water in food production, chlorine can add undesired taste and odor to the final product. For this reason, dechlorination is desired for food industries that use municipal tap water. For treated wastewater discharge or reuse, chlorine can be toxic to the receiving aqueous systems and to the irrigated plants. In both the above cases, dechlorination is also required. Traditionally activated carbon has been used as the ideal material for the removal of chlorine. The main mechanisms that describe the interaction between activated carbon and HOCl or OCl- are described by the following equations (AWWA, 1990): HOCl + C* → C*O + H+ + Cl- (1), OCl- + C* → C*O + Cl- (2) Where C* and C*O represent the activated carbon surface and a surface oxide, respectively. The present study proposes the use of agro-industrial by-products for the production of biochars that will be used for dechlorination of tap-water used for food-industry production. Different raw materials such as malt spent rootlets, coffee residue, olive and grape seeds, etc. are used for the production of biochar. Various temperatures and air-to-solid ratios are tested for optimizing biochar production. Batch tests as well as a column test are employed to study the dechlorination efficiency and kinetics of the different raw and biochar materials as well as those of commercial activated carbons. As chlorine concentration increases the removal also increases linearily. After 1 and 24 hours of contact the chlorine relative removal efficiencies for the biochar made from olive seeds are 50 and 77 ± 4%, respectively. It seems that the removal kinetics are faster during the first hour; then, removal continues but with a slower rate. Most of the biochars tested (with 3 mg of solid in 20 mL of chlorine solution at initial concentration Co=1.5 mg/L) demonstrated removal efficiencies with an average of 9.4 ± 0

  4. Methylene Blue Removal by Biochars from Food Industry By-Products

    Science.gov (United States)

    Orfanos, Alexis; Manariotis, Ioannis D.; Karapanagioti, Hrissi K.

    2016-04-01

    Biomass produced by food industries is mainly used as feedstock or in composting. In recent years, considerable research effort has been focused on the production of biochar under oxygen-limited conditions from carbon-rich biomass, such as food industry by-products, as mitigation measure for global warming once it is used as a soil amendment. The present study presents the findings of an experimental work, which investigated the use of different biochars for the removal of methylene blue (MB) from aqueous solutions. Biochars were produced from malt spent rootlets (MSR) from brewering and espresso coffee residue from coffee shops. MSR was pyrolyzed at temperatures of 300, 400, 500, 750, 850, and 900oC and the coffee residue was pyrolyzed at 850oC. The charring process was performed under limited-oxygen conditions using specialized containers. The surface area and the porosity of the materials were determined. Batch experiments were conducted in order to evaluate the sorption capacity of the above materials, and samples were agitated for 24 h at 25oC, at an optimum pH of about 7. Kinetic analysis was conducted over a period of 24 h, and isotherm studies were also constructed. The surface area of biochar produced from MSR and the MB removal were considerably increased at pyrolysis temperatures higher than 500oC. At 850oC, the maximum surface area value (300 m2 g-1) was observed, and the MB sorption capacity was 99 mg g-1. Based on the kinetic experimental data, sorption capacities at 120 min were over 58% of their equilibrium values for the biochars used. The maximum MB sorption capacity, based on the isotherm data, was 130 mg g-1, for the two biochars employed.

  5. Occurrence and formation of disinfection by-products in the swimming pool environment: A critical review.

    Science.gov (United States)

    Carter, Rhys A A; Joll, Cynthia A

    2017-08-01

    Disinfection of water for human use is essential to protect against microbial disease; however, disinfection also leads to formation of disinfection by-products (DBPs), some of which are of health concern. From a chemical perspective, swimming pools are a complex matrix, with continual addition of a wide range of natural and anthropogenic chemicals via filling waters, disinfectant addition, pharmaceuticals and personal care products and human body excretions. Natural organic matter, trace amounts of DBPs and chlorine or chloramines may be introduced by the filling water, which is commonly disinfected distributed drinking water. Chlorine and/or bromine is continually introduced via the addition of chemical disinfectants to the pool. Human body excretions (sweat, urine and saliva) and pharmaceuticals and personal care products (sunscreens, cosmetics, hair products and lotions) are introduced by swimmers. High addition of disinfectant leads to a high formation of DBPs from reaction of some of the chemicals with the disinfectant. Swimming pool air is also of concern as volatile DBPs partition into the air above the pool. The presence of bromine leads to the formation of a wide range of bromo- and bromo/chloro-DBPs, and Br-DBPs are more toxic than their chlorinated analogues. This is particularly important for seawater-filled pools or pools using a bromine-based disinfectant. This review summarises chemical contaminants and DBPs in swimming pool waters, as well as in the air above pools. Factors that have been found to affect DBP formation in pools are discussed. The impact of the swimming pool environment on human health is reviewed. Copyright © 2017. Published by Elsevier B.V.

  6. Effect of industrial by-products containing electron acceptors on mitigating methane emission during rice cultivation.

    Science.gov (United States)

    Ali, Muhammad Aslam; Lee, Chang Hoon; Kim, Sang Yoon; Kim, Pil Joo

    2009-10-01

    Three industrial by-products (fly ash, phosphogypsum and blast furnace slag), were evaluated for their potential re-use as soil amendments to reduce methane (CH(4)) emission resulting from rice cultivation. In laboratory incubations, CH(4) production rates from anoxic soil slurries were significantly reduced at amendment levels of 0.5%, 1%, 2% and 5% (wt wt(-1)), while observed CO(2) production rates were enhanced. The level of suppression in methane production was the highest for phosphogypsum, followed by blast slag and then fly ash. In the greenhouse experiment, CH(4) emission rates from the rice planted potted soils significantly decreased with the increasing levels (2-20 Mg ha(-1)) of the selected amendments applied, while rice yield simultaneously increased compared to the control treatment. At 10 Mg ha(-1) application level of the amendments, total seasonal CH(4) emissions were reduced by 20%, 27% and 25%, while rice grain yields were increased by 17%, 15% and 23% over the control with fly ash, phosphogypsum, and blast slag amendments, respectively. The suppression of CH(4) production rates as well as total seasonal CH(4) flux could be due to the increased concentrations of active iron, free iron, manganese oxides, and sulfate in the amended soil, which acted as electron acceptors and controlled methanogens' activity by limiting substrates availability. Among the amendments, blast furnace slag and fly ash contributed mainly to improve the soil nutrients balance and increased the soil pH level towards neutral point, but soil acidity was developed with phosphogypsum application. Conclusively, blast slag among the selected amendments would be a suitable soil amendment for reducing CH(4) emissions as well as sustaining rice productivity.

  7. Elemental mobility in sulfidic mine tailings reclaimed with paper mill by-products as sealing materials.

    Science.gov (United States)

    Jia, Yu; Stahre, Nanna; Mäkitalo, Maria; Maurice, Christian; Öhlander, Björn

    2017-07-13

    Sealing layers made of two alkaline paper mill by-products, fly ash and green liquor dregs, were placed on top of 50-year-old sulfide-containing tailings as a full-scale remediation approach. The performance and effectiveness of the sealing layers with high water content for an oxygen barrier and low hydraulic conductivity for a sealing layer in preventing the formation of acid rock drainage were evaluated 5 years after the remediation. The leaching behavior of the covered tailings was studied using batch leaching tests (L/S ratio 10 L/kg). The leaching results revealed that, in general, the dregs- and ash-covered tailings released relatively lower concentrations of many elements contained in acid rock drainage compared to those from the uncovered tailings. A change in the chemical composition and mineralogical state of the tailings was observed for the tailings beneath the covers. The increase in pH caused by the alkaline materials promoted metal precipitation. Geochemical modeling using PHREEQC confirmed most of the geochemical changes of the covered tailings. Both the ash and dregs showed potential to function as sealing materials in terms of their geochemical properties. However, mobilization of Zn and Ni from the lower part of the dregs-covered tailings was observed. The same phenomenon was observed for the lower part of the ash-covered tailings. Ash showed advantages over dregs as a cover material; based on geochemical studies, the ash immobilized more elements than the dregs did. Lysimeters were installed below the sealing layers, and infiltrating water chemistry and hydrology were studied to monitor the amount and quality of the leachate percolating through.

  8. Fate of disinfection by-products in groundwater during aquifer storage and recovery with reclaimed water.

    Science.gov (United States)

    Pavelic, Paul; Nicholson, Brenton C; Dillon, Peter J; Barry, Karen E

    2005-05-01

    Knowledge on the behaviour of disinfection by-products (DBPs) during aquifer storage and recovery (ASR) is limited even though this can be an important consideration where recovered waters are used for potable purposes. A reclaimed water ASR trial in an anoxic aquifer in South Australia has provided some of the first quantitative information at field-scale on the fate and transport of trihalomethanes (THMs) and haloacetic acids (HAAs). The results revealed that THM half-lives varied from storage phase of the trial, as compared to an observation well situated 4 m away, which remained nitrate-reducing. These findings agree with previous laboratory-based studies which also show persistence declining with increased bromination of THMs and reducing redox conditions. Modelling suggests that the chlorinated injectant has sufficient residual chlorine and natural organic matter for substantial increases in THMs to occur within the aquifer, however this is masked in some of the field observations due to concurrent attenuation, particularly for the more rapidly attenuated brominated compounds. The model is based on data taken from water distribution systems and may not be representative for ASR since bromide and ammonia concentrations in the injected water and the possible role of organic carbon in the aquifer were not taken into consideration. During the storage phase DBP formation potentials were reduced as a result of the removal of precursor material despite an increase in the THM formation potential per unit weight of total organic carbon. This suggests that water quality improvements with respect to THMs and HAAs can be achieved through ASR in anoxic aquifers.

  9. Aqueous photodegradation of 4-tert-butylphenol: By-products, degradation pathway and theoretical calculation assessment

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Yanlin [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Shi, Jin; Chen, Hongche [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China); Zhao, Jianfu [State Key Laboratory of Pollution Control and Resources Reuse, College of Environmental Science and Engineering, Tongji University, Shanghai 200092 (China); Dong, Wenbo, E-mail: wbdong@fudan.edu.cn [Shanghai Key Laboratory of Atmospheric Particle Pollution and Prevention, Department of Environmental Science & Engineering, Fudan University, Shanghai 200433 (China)

    2016-10-01

    4-tert-butylphenol (4-t-BP), an endocrine disrupting chemical, is widely distributed in natural bodies of water but is difficult to biodegrade. In this study, we focused on the transformation of 4-t-BP in photo-initiated degradation processes. The steady-state photolysis and laser flash photolysis (LFP) experiments were conducted in order to elucidate its degradation mechanism. Identification of products was performed using the GC–MS, LC-MS and theoretical calculation techniques. The oxidation pathway of 4-t-BP by hydroxyl radical (HO·) was also studied and H{sub 2}O{sub 2} was added to produce HO·. 4-tert-butylcatechol and 4-tert-butylphenol dimer were produced in 4-t-BP direct photolysis. 4-tert-butylcatechol and hydroquinone were produced by the oxidation of HO·. But the formation mechanism of 4-tert-butylcatechol in the two processes was different. The benzene ring was fractured in 4-t-BP oxidation process and 29% of TOC was degraded after 16 h irradiation. - Highlights: • Photodegradation of 4-t-BP, an endocrine disrupting chemical, has been investigated. • 3 stable byproducts were identified from photolysis and oxidation processes. • 5 transient by-products were concluded from LFP experiments. • The theoretical calculation was performed to confirm the byproducts. • 4-t-BP was degraded with increasing efficiency: 254 nm < H{sub 2}O{sub 2}/313 nm < H{sub 2}O{sub 2}/254 nm.

  10. Bioanalytical and chemical evaluation of disinfection by-products in swimming pool water.

    Science.gov (United States)

    Yeh, Ruby Y L; Farré, Maria José; Stalter, Daniel; Tang, Janet Y M; Molendijk, Jeffrey; Escher, Beate I

    2014-08-01

    Pool water disinfection is vital to prevent microbial pathogens. However, potentially hazardous disinfection by-products (DBP) are formed from the reaction between disinfectants and organic/inorganic precursors. The aim of this study was to evaluate the presence of DBPs in various swimming pool types in Brisbane, Australia, including outdoor, indoor and baby pools, and the dynamics after a complete water renewal. Chemical analysis of 36 regulated and commonly found DBPs and total adsorbable organic halogens as well as in vitro bioassays targeting cytotoxicity, oxidative stress and genotoxicity were used to evaluate swimming pool water quality. Dichloroacetic acid and trichloroacetic acid dominated in the pool water samples with higher levels (up to 2600 μg/L) than the health guideline values set by the Australian Drinking Water Guidelines (100 μg/L). Chlorinated DBPs occurred at higher concentrations compared to tap water, while brominated DBPs decreased gradually with increasing pool water age. Biological effects were expressed as chloroacetic acid equivalent concentrations and compared to predicted effects from chemical analysis and biological characterisation of haloacetic acids. The quantified haloacetic acids explained 35-118% of the absorbable organic halogens but less than 4% of the observed non-specific toxicity (cytotoxicity), and less than 1% of the observed oxidative stress response and genotoxicity. While the DBP concentrations in Australian pools found in this study are not likely to cause any adverse health effect, they are higher than in other countries and could be reduced by better hygiene of pool users, such as thorough showering prior to entering the pool and avoiding urination during swimming.

  11. New perspectives on the cancer risks of trichloroethylene, its metabolites, and chlorination by-products

    Energy Technology Data Exchange (ETDEWEB)

    Bogen, K.T. [Lawrence Livermore National Lab., CA (United States); Slone, T.; Gold, L.S.; Manley, N.; Revzan, K. [Lawrence Berkeley Lab., CA (United States)

    1994-12-08

    Scientific developments in the 1990`s have important implications for the assessment of cancer risks posed by exposures to trichloroethylene (TCE). These new developments include: epidemiological studies; experimental studies of TCE carcinogenicity, metabolism and metabolite carcinogenicity; applications of new physiologically based pharmacokinetic (PBPK) models for TCE; and new pharmacodynamic data obtained for TCE and its rhetabolites. Following a review of previous assessments of TCE carcinogenicity, each of these new sets of developments is summarized. The new epidemiological data do not provide evidence of TCE carcinogenicity in humans, and the new pharmacodynamic data support the hypothesis that TCE carcinogenicity is caused by TCE-induced cytotoxicity. Based on this information, PBPK-based estimates for likely no-adverse effect levels (NOAELs) for human exposures to TCE are calculated to be 16 ppb for TCE in air respired 24 hr/day, and 210 ppb for TCE in drinking water. Cancer risks of zero are predicted for TCE exposures below these calculated NOAELs. For comparison, hypothetical cancer risks posed by lifetime ingestive and multiroute household exposures to TCE in drinking water, at the currently enforced Maximum Contaminant Level (MCL) concentration of 5 ppb are extrapolated from animal bioassay data using a conservative, linear dose-response model. These TCE-related risks are compared to corresponding ones associated with concentrations of chlorination by-products (CBP) in household water. It is shown that, from the standpoint of comparative hypothetical cancer risks, based on conservative linear dose-response extrapolations, there would likely be no health benefit, and more likely a possible health detriment, associated with any switch from a household water supply containing <375 ppb TCE to one containing CBP at levels corresponding to the currently proposed 80-ppb MCL for total trihalomethanes.

  12. Identification of endocrine active disinfection by-products (DBPs) that bind to the androgen receptor.

    Science.gov (United States)

    Holmes, Breanne E; Smeester, Lisa; Fry, Rebecca C; Weinberg, Howard S

    2017-11-01

    The formation of disinfection by-products (DBPs) in drinking water occurs when chemical disinfectants such as chlorine and chloramine react with natural organic matter and anthropogenic pollutants. Some DBPs have been linked to bladder cancer and infertility; however, the underlying mechanism of action is unknown. One possibility is disruption of the endocrine system, with DBPs binding to the androgen receptor and subsequently altering gene expression. Using the androgen receptor-binding assay and in silico molecular docking, the binding affinity of 21 suspected and known DBPs were tested individually at concentrations over the range 0.1 nM-2 mM. 14 DBPs were found to bind at IC50 values ranging from 1.86 mM for 2,3-dichloropropionamide to 13.5 μM for 3,4,5,6-tetrachloro-benzoquinone as compared to the positive control, 4-n-nonylphenol which bound at 31.6 μM. Since DBPs are present in drinking waters as mixtures, the question of how IC50 values for individual DBPs might be affected by the presence of other chemicals is addressed. Seven of the chemicals with the strongest binding affinities and one chemical with no binding affinity were tested in binary mixtures with 4-n-nonylphenol, a known androgenic chemical found in some surface waters. In these binary mixtures, concentration additive binding was observed. While typical levels of individual androgenic DBPs in drinking water are below their measured IC50 values, their combined binding abilities in mixtures could be a source of androgen disruption. Copyright © 2017. Published by Elsevier Ltd.

  13. Photochemical and bacterial transformations of disinfection by-product precursors in water.

    Science.gov (United States)

    Chow, Alex T; Díaz, Francisco J; Wong, Kin-Hang; O'Geen, Anthony T; Dahlgren, Randy A; Wong, Po-Keung

    2013-09-01

    In situ grab sampling from source waters and water extraction from source materials are common methods for determining disinfection by-product (DBP) formation potential (FP) of water samples or reactivity of dissolved organic matter (DOM) in forming DBPs during chlorination. However, DOM, as the main DBP precursor, collected using these techniques may not represent the DOM reacting with disinfectants due to biogeochemical alterations during water conveyance to drinking water treatment facilities. In this study, we exposed leachates from fresh litter and associated decomposed duff to natural sunlight or K-12 for 14 d and evaluated the changes, if any, on the propensity to form trihalomethane (THM), haloacetonitrile (HAN), and chloral hydrate (CHD) during chlorination. Sunlight treatment did not significantly change dissolved organic carbon (DOC) concentration but caused a 24 to 43% decrease in the specific ultraviolet absorbance (SUVA) at 254 nm, indicating that UV-active chromophores were transformed or degraded. There were significant increases ( < 0.05) in specific HAN formation potential (HAN-FP) and specific CHD formation potential (CHD-FP) (i.e., HAN and CHD formation potentials per unit carbon), but no change in specific THM formation potential (THM-FP) after sunlight exposure. In contrast, bacterial treatment did not show any significant effect on SUVA, specific chlorine demand, or any specific DBP-FPs, although bacterial colony counts suggested DOM in leachates was utilized for bacterial growth. Results of this study confirmed that the reactivity of DOM in forming DBPs could be different after biogeochemical processes compared with its source materials. For this study, photochemical reactions had a greater effect on DBP-FPs than did microbial degradation. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  14. Secondary formation of disinfection by-products by UV treatment of swimming pool water.

    Science.gov (United States)

    Spiliotopoulou, Aikaterini; Hansen, Kamilla M S; Andersen, Henrik R

    2015-07-01

    Formation of disinfection by-products (DBPs) during experimental UV treatment of pool water has previously been reported with little concurrence between laboratory studies, field studies and research groups. In the current study, changes in concentration of seven out of eleven investigated volatile DBPs were observed in experiments using medium pressure UV treatment, with and without chlorine and after post-UV chlorination. Results showed that post-UV chlorine consumption increased, dose-dependently, with UV treatment dose. A clear absence of trihalomethane formation by UV and UV with chlorine was observed, while small yet statistically significant increases in dichloroacetonitrile and dichloropropanone concentrations were detected. Results indicate that post-UV chlorination clearly induced secondary formation of several DBPs. However, the formation of total trihalomethanes was no greater than what could be replicated by performing the DBP formation assay with higher chlorine concentrations to simulate extended chlorination. Post-UV chlorination of water from a swimming pool that continuously uses UV treatment to control combined chlorine could not induce secondary formation for most DBPs. Concurrence for induction of trihalomethanes was identified between post-UV chlorination treatments and simulated extended chlorination time treatment. Trihalomethanes could not be induced by UV treatment of water from a continuously UV treated pool. This indicates that literature reports of experimentally induced trihalomethane formation by UV may be a result of kinetic increase in formation by UV. However, this does not imply that higher trihalomethane concentrations would occur in pools that apply continuous UV treatment. The bromine fraction of halogens in formed trihalomethanes increased with UV dose. This indicates that UV removes bromine atoms from larger molecules that participate in trihalomethane production during post-UV chlorination. Additionally, no significant

  15. Genotoxic Effects in Swimmers Exposed to Disinfection By-products in Indoor Swimming Pools

    Science.gov (United States)

    Kogevinas, Manolis; Villanueva, Cristina M.; Font-Ribera, Laia; Liviac, Danae; Bustamante, Mariona; Espinoza, Felicidad; Nieuwenhuijsen, Mark J.; Espinosa, Aina; Fernandez, Pilar; DeMarini, David M.; Grimalt, Joan O.; Grummt, Tamara; Marcos, Ricard

    2010-01-01

    Background Exposure to disinfection by-products (DBPs) in drinking water has been associated with cancer risk. A recent study (Villanueva et al. 2007; Am J Epidemiol 165:148–156) found an increased bladder cancer risk among subjects attending swimming pools relative to those not attending. Objectives We evaluated adults who swam in chlorinated pools to determine whether exposure to DBPs in pool water is associated with biomarkers of genotoxicity. Methods We collected blood, urine, and exhaled air samples from 49 nonsmoking adult volunteers before and after they swam for 40 min in an indoor chlorinated pool. We estimated associations between the concentrations of four trihalomethanes (THMs) in exhaled breath and changes in micronuclei (MN) and DNA damage (comet assay) in peripheral blood lymphocytes before and 1 hr after swimming; urine mutagenicity (Ames assay) before and 2 hr after swimming; and MN in exfoliated urothelial cells before and 2 weeks after swimming. We also estimated associations and interactions with polymorphisms in genes related to DNA repair or to DBP metabolism. Results After swimming, the total concentration of the four THMs in exhaled breath was seven times higher than before swimming. The change in the frequency of micronucleated lymphocytes after swimming increased in association with higher exhaled concentrations of the brominated THMs (p = 0.03 for bromodichloromethane, p = 0.05 for chlorodibromomethane, p = 0.01 for bromoform) but not chloroform. Swimming was not associated with DNA damage detectable by the comet assay. Urine mutagenicity increased significantly after swimming, in association with the higher concentration of exhaled bromoform (p = 0.004). We found no significant associations with changes in micronucleated urothelial cells. Conclusions Our findings support potential genotoxic effects of exposure to DBPs from swimming pools. The positive health effects gained by swimming could be increased by reducing the potential health

  16. Ensiling Characteristics and the Nutrient Degradability of a By-product Feed-based Silage

    Directory of Open Access Journals (Sweden)

    Y. I. Kim

    2014-02-01

    Full Text Available This study was conducted to evaluate the ensiling characteristics and the in situ degradability of a by-product feed (BF-based silage. Before ensilation, the BF-based mixture was composed of 50% spent mushroom substrate, 21% recycled poultry bedding, 15% ryegrass straw, 10.8% rice bran, 2% molasses, 0.6% bentonite, and 0.6% microbial inoculant on a wet basis and ensiled for up to 4 weeks. The BF-based silage contained on average 39.3% moisture, 13.4% crude protein (CP, and 52.2% neutral detergent fiber (NDF, 49% total digestible nutrient, and 37.8% physically effective NDF1.18 on a dry matter (DM basis. Ensiling the BF-based silage for up to 4 weeks affected (p<0.01 the chemical composition to a small extent, increased (p<0.05 the lactic acid and NH3-N content, and decreased (p<0.05 both the total bacterial and lactic acid bacterial counts from 109 to 108 cfu/g when compared to that before ensiling. These parameters indicated that the silage was fermented and stored well during the 4-week ensiling period. Compared with rice or ryegrass straws, the BF-based silage had a higher (p<0.05 water-soluble and filterable fraction, a lower insoluble degradable DM and CP fraction (p<0.05, a lower digestible NDF (p<0.05 fraction, a higher (p<0.05 DM and CP disappearance and degradability rate, and a lower (p<0.05 NDF disappearance and degradability rate. These results indicated that cheap, good-quality BF-based roughage could be produced by ensiling SMS, RPB, rice bran, and a minimal amount of straw.

  17. Fingerprinting the reactive toxicity pathways of 50 drinking water disinfection by-products.

    Science.gov (United States)

    Stalter, Daniel; O'Malley, Elissa; von Gunten, Urs; Escher, Beate I

    2016-03-15

    A set of nine in vitro cellular bioassays indicative of different stages of the cellular toxicity pathway was applied to 50 disinfection by-products (DBPs) to obtain a better understanding of the commonalities and differences in the molecular mechanisms of reactive toxicity of DBPs. An Eschericia coli test battery revealed reactivity towards proteins/peptides for 64% of the compounds. 98% activated the NRf2-mediated oxidative stress response and 68% induced an adaptive stress response to genotoxic effects as indicated by the activation of the tumor suppressor protein p53. All DBPs reactive towards DNA in the E. coli assay and activating p53 also induced oxidative stress, confirming earlier studies that the latter could trigger DBP's carcinogenicity. The energy of the lowest unoccupied molecular orbital ELUMO as reactivity descriptor was linearly correlated with oxidative stress induction for trihalomethanes (r(2)=0.98) and haloacetamides (r(2)=0.58), indicating that potency of these DBPs is connected to electrophilicity. However, the descriptive power was poor for haloacetic acids (HAAs) and haloacetonitriles (r(2) (0.80, indicating that HAAs' potency is connected to both, electrophilicity and speciation. Based on the activation of oxidative stress response and the soft electrophilic character of most tested DBPs we hypothesize that indirect genotoxicity-e.g., through oxidative stress induction and/or enzyme inhibition-is more plausible than direct DNA damage for most investigated DBPs. The results provide not only a mechanistic understanding of the cellular effects of DBPs but the effect concentrations may also serve to evaluate mixture effects of DBPs in water samples.

  18. Strontium Isotope Study of Coal Untilization By-products Interacting with Environmental Waters

    Energy Technology Data Exchange (ETDEWEB)

    Spivak-Birndorf, Lev J; Stewart, Brian W; Capo, Rosemary C; Chapman, Elizabeth C; Schroeder, Karl T; Brubaker, Tonya M

    2011-09-01

    Sequential leaching experiments on coal utilization by-products (CUB) were coupled with chemical and strontium (Sr) isotopic analyses to better understand the influence of coal type and combustion processes on CUB properties and the release of elements during interaction with environmental waters during disposal. Class C fly ash tended to release the highest quantity of minor and trace elements—including alkaline earth elements, sodium, chromium, copper, manganese, lead, titanium, and zinc—during sequential extraction, with bottom ash yielding the lowest. Strontium isotope ratios ({sup 87}Sr/{sup 86}Sr) in bulk-CUB samples (total dissolution of CUB) are generally higher in class F ash than in class C ash. Bulk-CUB ratios appear to be controlled by the geologic source of the mineral matter in the feed coal, and by Sr added during desulfurization treatments. Leachates of the CUB generally have Sr isotope ratios that are different than the bulk value, demonstrating that Sr was not isotopically homogenized during combustion. Variations in the Sr isotopic composition of CUB leachates were correlated with mobility of several major and trace elements; the data suggest that arsenic and lead are held in phases that contain the more radiogenic (high-{sup 87}Sr/{sup 86}Sr) component. A changing Sr isotope ratio of CUB-interacting waters in a disposal environment could forecast the release of certain strongly bound elements of environmental concern. This study lays the groundwork for the application of Sr isotopes as an environmental tracer for CUB–water interaction.

  19. Extraction yield, antioxidant activity andphenolics from grape, mango and peanut agro-industrial by-products

    Directory of Open Access Journals (Sweden)

    Gilberto Costa Braga

    2016-01-01

    Full Text Available ABSTRACT: The objective of this study was to determine and correlate the extraction yields, antioxidant activity, total phenolics and total flavonoids from grape, mango and peanut agro-industrial by-products. The β-carotene/linoleic acid autoxidation system and scavenging capacity for DPPH and ABTS free radicals assays were used. The results were expressed in terms of lyophilized sample or dry extract. Mango bagasse exhibited the highest extraction yield (37.07% followed by peanut skin (15.17% and grape marc (7.92%. In terms of lyophilized sample, total phenolics did not vary significantly among the residues evaluated (average of 60.33mg EAG g-1; however, when they were expressed as dry extract grape marc exhibited the highest total phenolic (768.56±116.35mg GAE g-1, followed by peanut skin (404.40±13.22mg GAE g-1 and mango bagasse (160.25±4.52mg GAE g-1, Peanut skin exhibited the highest content of total flavonoids (2.44mg QE g-1, while grape marc (1.76mg QE g-1 and mango bagasse (1.70 mg QE g-1 showed no significant differences. The extraction yield showed strong negative linear correlation with total phenolic and total flavonoid. This study showed that peanut skin was the sample with the highest antioxidant activity and it was strongly influenced by total flavonoids. All extracts of byproducts showed antioxidant activity comparable to α-tocopherol, and they can be a source of natural compounds with potential to replace synthetic antioxidants such as BHT.

  20. Natural gas; Erdgas

    Energy Technology Data Exchange (ETDEWEB)

    Graf, Frank [DVGW-Forschungsstelle am KIT, Karlsruhe (Germany); Groeschl, Frank; Wetzel, Uwe [DVGW, Bonn (Germany); Heikrodt, Klaus [Hochschule Ostwestfalen-Lippe, Lemgo (Germany); Krause, Hartmut [DBI Gastechnologisches Institut, An-Institut der TU Bergakademie, Freiberg (Germany); Beestermoeller, Christina; Witschen, Bernhard [Team Consult G.P.E. GmbH, Berlin (Germany); Albus, Rolf; Burmeister, Frank [Gas- und Waerme-Institut Essen e.V., Essen (Germany)

    2015-07-01

    The reform of the EEG in Germany, a positive global development in natural gas, the decline in oil prices, questions about the security of supply in Europe, and not least the effect of the decision by E.on at the end of 2014 have moved the gas industry. Gas has the lowest CO{sub 2} emissions of fossil fuels. Flexibility, storability, useful for networks and the diversity in the application make it an ideal partner for renewable energy. However, these complementary properties are valued at wind and photovoltaics internationally and nationally different. The situation in the gas power plants remains tense. LNG - liquefied natural gas - is on the rise. [German] Die Reform des EEG in Deutschland, eine positive Entwicklung beim Gas weltweit, der Verfall der Oelpreises, Fragen zur Versorgungssicherheit in Europa und nicht zuletzt die Auswirkung der Entscheidung von E.on Ende 2014 haben die Gaswirtschaft bewegt. Gas weist die geringsten CO{sub 2}-Emissioen der fossilen Energietraeger auf. Flexibilitaet, Speicherbarkeit, Netzdienlichkeit sowie die Vielfalt in der Anwendung machen es zum idealen Partner der erneuerbaren Energien. Allerdings werden diese komplementaeren Eigenschaften zu Wind und Photovoltaik international und national unterschiedlich bewertet. Die Lage bei den Gaskraftwerken bleibt weiter angespannt. LNG - verfluessigtes Erdgas - ist auf dem Vormarsch.

  1. Origin of natural gas; Tennen gas no kigen

    Energy Technology Data Exchange (ETDEWEB)

    Katayama, Y. [The Institute of Applied Energy, Tokyo (Japan)

    1996-03-20

    Natural gas, which is a general term of flammable hydrocarbon gases such as methane, is classified by origin into the following categories : (1) oil field gas (oil gas), (2) aquifers (bacteria-fermented methane), (3) coal gas (coal field gas), and (4) abiogenetic gas. The natural gas which has (1-4) origins and is now used as resource in a large quantity is (1) oil field gas. This gas is a hydrocarbon gas recovered in the production process of petroleum and contains components such as ethane, propane and butane. To the contrary, (2) aquifers and (3) coal gas have methane as main component. As (4) abiogenetic methane, there are gas formed in inorganic reaction in activities of submarine volcanos and deep gas (earth origin gas). Oil field gas has kerogen origin. Aquifers were formed by fermentation of organic matters. Coal gas was formed by coalification of vitrinite. As abiogenetic methane, there are inorganic reaction formation gas and deep gas, the latter of which exists little as resource. 7 refs., 11 figs., 1 tab.

  2. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2007-06-30

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of April 1, 2007 through June 30, 2007. Key activities during this time period included: (1) Organizing and hosting the 2007 GSTC Spring Meeting; (2) Identifying the 2007 GSTC projects, issuing award or declination letters, and begin drafting subcontracts; (3) 2007 project mentoring teams identified; (4) New NETL Project Manager; (5) Preliminary planning for the 2007 GSTC Fall Meeting; (6) Collecting and compiling the 2005 GSTC project final reports; and (7) Outreach and communications.

  3. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2007-03-31

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is crucial in meeting the needs of these new markets. To address the gas storage needs of the natural gas industry, an industry-driven consortium was created - the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance the operational flexibility and deliverability of the nation's gas storage system, and provide a cost-effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January1, 2007 through March 31, 2007. Key activities during this time period included: {lg_bullet} Drafting and distributing the 2007 RFP; {lg_bullet} Identifying and securing a meeting site for the GSTC 2007 Spring Proposal Meeting; {lg_bullet} Scheduling and participating in two (2) project mentoring conference calls; {lg_bullet} Conducting elections for four Executive Council seats; {lg_bullet} Collecting and compiling the 2005 GSTC Final Project Reports; and {lg_bullet} Outreach and communications.

  4. Gas Storage Technology Consortium

    Energy Technology Data Exchange (ETDEWEB)

    Joel L. Morrison; Sharon L. Elder

    2006-05-10

    Gas storage is a critical element in the natural gas industry. Producers, transmission and distribution companies, marketers, and end users all benefit directly from the load balancing function of storage. The unbundling process has fundamentally changed the way storage is used and valued. As an unbundled service, the value of storage is being recovered at rates that reflect its value. Moreover, the marketplace has differentiated between various types of storage services, and has increasingly rewarded flexibility, safety, and reliability. The size of the natural gas market has increased and is projected to continue to increase towards 30 trillion cubic feet (TCF) over the next 10 to 15 years. Much of this increase is projected to come from electric generation, particularly peaking units. Gas storage, particularly the flexible services that are most suited to electric loads, is critical in meeting the needs of these new markets. In order to address the gas storage needs of the natural gas industry, an industry-driven consortium was created--the Gas Storage Technology Consortium (GSTC). The objective of the GSTC is to provide a means to accomplish industry-driven research and development designed to enhance operational flexibility and deliverability of the Nation's gas storage system, and provide a cost effective, safe, and reliable supply of natural gas to meet domestic demand. This report addresses the activities for the quarterly period of January 1, 2006 through March 31, 2006. Activities during this time period were: (1) Organize and host the 2006 Spring Meeting in San Diego, CA on February 21-22, 2006; (2) Award 8 projects for co-funding by GSTC for 2006; (3) New members recruitment; and (4) Improving communications.

  5. Deep source gas

    Energy Technology Data Exchange (ETDEWEB)

    1985-02-01

    Three separate emplacement concepts could explain the occurrence of gas at extreme depths: abiogenesis (a primordial, nonbiologic origin source); subducted, organic-origin gas (involving the deep, tectonic subduction emplacement of hydrocarbon-generating ocean sediments); and deep sedimentary basin gas (the more conventional emplacement of sedimentary rocks by deep downwarping of the Earth's crust). Of these concepts, Deep Source Gas research focuses on the subducted, organic-origin concept. The purpose of Deep Source Gas research is to verify natural gas arising from depths in excess of 30,000 feet, to relate these occurrences to conceptual models, to define the limits of target areas, to quantify the resource, and to determine the significance of the gas to the nation's reserves. The research emphasizes an Earth science study (geology, geochemistry, and geophysics) of the Cordilleran Geologic Province of western North America. This area is considered a prospective source largely because of known and suspected plate tectonic structures and their youthful emplacement, which increase the likelihood of a timely entrapment of deep-source generated hydrocarbons. Detailed geochemical studies indicate that the deep-source-gas generating capacity of the Aleutian Trench area of southern Alaska is high. Furthermore, geophysical studies show that an apparent fossil subduction zone exists in western Washington. This zone appears to have very thick sedimentary rock units, the existence of which will be evaluated through a more detailed seismic study and possibly through drilling activities. Structural observations made in the northern Brooks Range and central Alaskan Range indicate that overthrusting and compressional features may serve as large-scale target areas for deep source gas generation and occurrence. 12 figures, 2 tables.

  6. Influence of Natural Organic Matter (NOM) Character on the Distribution of Chlorinated and Chloraminated Disinfection By-Products (DBPs) at Rand Water

    Science.gov (United States)

    Marais, Savia S.; Ncube, Esper J.; Haarhoff, Johannes; Msagati, Titus AM; Mamba, Bhekie B.; Nkambule, Thabo I.

    2016-04-01

    Certain disinfection by-products (DBPs) are likely human carcinogens or present mutagenic effects while many DBPs are unidentified. Considering the possibility of DBPs being harmful to human health and the fact that trihalomethanes (THMs) are the only regulated DBP in the South African National Standard (SANS:241) for drinking water, special interest in the precursors to these DBPs' formation is created. It is essential to understand the reactivity and character of the precursors responsible for the formation of DBPs in order to enhance precursor removal strategies during the treatment of drinking water. In this study the character of NOM within surface water and the subsequent distribution of THMs formed in the drinking water from Rand Waters' full scale treatment plant were investigated. Molecular size distribution (MSD) of NOM within the surface water was determined by high performance size exclusion chromatography (HPSEC). Specific ultraviolet absorbance (SUVA) and UV254 measurements formed part of the NOM character study as they provide an indication of the aromaticity of organic matter. The four THMs; bromoform, chloroform, dibromochloromethane (DBCM) and bromodichloromethane (BDCM)were measured by gas chromatography. The sum of these four THMs was expressed as total trihalomethane (TTHM). On average the chloroform constituted 76.2% of the total TTHM, BDCM 22.5% while DBCM and bromoform measured below the detection limit. THM speciation after chlorination and chloramination concentrations increased in the sequence bromoform water in summer when high temperatures and rainfall occurred. The results displayed are an indication that aromatic NOM were the main precursor to TTHM formation, more prominently during summer. Keywords: disinfection by-products, molecular size distribution, natural organic matter, UV254

  7. Raman Gas Analyzer (RGA): Natural Gas Measurements.

    Science.gov (United States)

    Petrov, Dmitry V; Matrosov, Ivan I

    2016-06-08

    In the present work, an improved model of the Raman gas analyzer (RGA) of natural gas (NG) developed by us is described together with its operating principle. The sensitivity has been improved and the number of measurable gases has been expanded. Results of its approbation on a real NG sample are presented for different measurement times. A comparison of the data obtained with the results of chromatographic analysis demonstrates their good agreement. The time stability of the results obtained using this model is analyzed. It is experimentally established that the given RGA can reliably determine the content of all molecular NG components whose content exceeds 0.005% for 100 s; moreover, in this case the limiting sensitivity for some NG components is equal to 0.002%.

  8. micro strip gas chamber

    CERN Multimedia

    1998-01-01

    About 16 000 Micro Strip Gas Chambers like this one will be used in the CMS tracking detector. They will measure the tracks of charged particles to a hundredth of a millimetre precision in the region near the collision point where the density of particles is very high. Each chamber is filled with a gas mixture of argon and dimethyl ether. Charged particles passing through ionise the gas, knocking out electrons which are collected on the aluminium strips visible under the microscope. Such detectors are being used in radiography. They give higher resolution imaging and reduce the required dose of radiation.

  9. Fundamentals of gas dynamics

    CERN Document Server

    Babu, V

    2014-01-01

    Fundamentals of Gas Dynamics, Second Edition isa comprehensively updated new edition and now includes a chapter on the gas dynamics of steam. It covers the fundamental concepts and governing equations of different flows, and includes end of chapter exercises based on the practical applications. A number of useful tables on the thermodynamic properties of steam are also included.Fundamentals of Gas Dynamics, Second Edition begins with an introduction to compressible and incompressible flows before covering the fundamentals of one dimensional flows and normal shock wav

  10. Gas Dynamics Equations: Computation

    CERN Document Server

    Chen, Gui-Qiang G

    2012-01-01

    Shock waves, vorticity waves, and entropy waves are fundamental discontinuity waves in nature and arise in supersonic or transonic gas flow, or from a very sudden release (explosion) of chemical, nuclear, electrical, radiation, or mechanical energy in a limited space. Tracking these discontinuities and their interactions, especially when and where new waves arise and interact in the motion of gases, is one of the main motivations for numerical computation for the gas dynamics equations. In this paper, we discuss some historic and recent developments, as well as mathematical challenges, in designing and formulating efficient numerical methods and algorithms to compute weak entropy solutions for the Euler equations for gas dynamics.

  11. Gas solubilities widespread applications

    CERN Document Server

    Gerrard, William

    1980-01-01

    Gas Solubilities: Widespread Applications discusses several topics concerning the various applications of gas solubilities. The first chapter of the book reviews Henr's law, while the second chapter covers the effect of temperature on gas solubility. The third chapter discusses the various gases used by Horiuti, and the following chapters evaluate the data on sulfur dioxide, chlorine data, and solubility data for hydrogen sulfide. Chapter 7 concerns itself with solubility of radon, thoron, and actinon. Chapter 8 tackles the solubilities of diborane and the gaseous hydrides of groups IV, V, and

  12. High enthalpy gas dynamics

    CERN Document Server

    Rathakrishnan, Ethirajan

    2014-01-01

    This is an introductory level textbook which explains the elements of high temperature and high-speed gas dynamics. written in a clear and easy to follow style, the author covers all the latest developments in the field including basic thermodynamic principles, compressible flow regimes and waves propagation in one volume covers theoretical modeling of High Enthalpy Flows, with particular focus on problems in internal and external gas-dynamic flows, of interest in the fields of rockets propulsion and hypersonic aerodynamics High enthalpy gas dynamics is a compulsory course for aerospace engine

  13. Gas and Shadow Swing

    Science.gov (United States)

    Tsai, Chi-Hung; Lai, Mei-Yi; Liu, Che-Wei; Huang, Shiang-Yin; Lin, Che-Yu; Yeh, Jeng-Sheng

    In our digital art, we design a folding fan as an interactive magic device. You can use it to play with gas around the world of illusions. Although gas could not be seen in our real world, we still want to interact with it in our illusions by the element of bubble shadows. Opening and swinging the folding fan can blow the bubble shadows away; closing and swinging it can break bubbles. If the magic fan touches the shadow of gas, the bubble shadows will explode and release colorful particles to surround you. Those actions are controlled and located by our circuits with Arduino board.

  14. Gas only nozzle

    Science.gov (United States)

    Bechtel, William Theodore; Fitts, David Orus; DeLeonardo, Guy Wayne

    2002-01-01

    A diffusion flame nozzle gas tip is provided to convert a dual fuel nozzle to a gas only nozzle. The nozzle tip diverts compressor discharge air from the passage feeding the diffusion nozzle air swirl vanes to a region vacated by removal of the dual fuel components, so that the diverted compressor discharge air can flow to and through effusion holes in the end cap plate of the nozzle tip. In a preferred embodiment, the nozzle gas tip defines a cavity for receiving the compressor discharge air from a peripheral passage of the nozzle for flow through the effusion openings defined in the end cap plate.

  15. US crude oil, natural gas, and natural gas liquids reserves

    Energy Technology Data Exchange (ETDEWEB)

    1990-10-05

    This report presents estimates of proved reserves of crude oil, natural gas, and natural gas liquids as of December 31, 1989, and production volumes for the year 1989 for the total United States and for selected states and state sub-divisions. Estimates are presented for the following four categories of natural gas: total gas (wet after lease separation), its two major components (nonassociated and associated-dissolved gas), and total dry gas (wet gas adjusted for the removal of liquids at natural gas processing plants). In addition, two components of natural gas liquids, lease condensate and natural gas plant liquids, have their reserves and production reported separately. Also included is information on indicated additional crude oil reserves and crude oil, natural gas, and lease condensate reserves in nonproducing reservoirs. 28 refs., 9 figs., 15 tabs.

  16. DURABILITY EVALUATION AND PRODUCTION OF MANUFACTURED AGGREGATES FROM COAL COMBUSTION BY-PRODUCTS

    Energy Technology Data Exchange (ETDEWEB)

    M. M. Wu

    2005-02-01

    Under the cooperative agreement with DOE, the Research and Development Department of CONSOL Energy (CONSOL R&D), teamed with Universal Aggregates, LLC, to conduct a systematic study of the durability of aggregates manufactured using a variety of flue gas desulfurization (FGD), fluidized-bed combustion (FBC) and fly ash specimens with different chemical and physical properties and under different freeze/thaw, wet/dry and long-term natural weathering conditions. The objectives of the study are to establish the relationships among the durability and characteristics of FGD material, FBC ash and fly ash, and to identify the causes of durability problems, and, ultimately, to increase the utilization of FGD material, FBC ash and fly ash as a construction material. Manufactured aggregates made from FGD material, FBC ash and fly ash, and products made from those manufactured aggregates were used in the study. The project is divided into the following activities: sample collection and characterization; characterization and preparation of manufactured aggregates; determination of durability characteristics of manufactured aggregates; preparation and determination of durability characteristics of manufactured aggregate products; and data evaluation and reporting.

  17. [Aspartic Acid Generated in the Process of Chlorination Disinfection By-product Dichloroacetonitrile].

    Science.gov (United States)

    Ding, Chun-sheng; Li, Nai-jun; Zhang, Tao; Zhang, Meng-qing

    2016-05-15

    In this study, a method was developed for the determination of dichloroacetonitrile (DCAN) in drinking water by liquid- liquid micro-extraction and gas chromatography/mass spectrometry ( LLE-GC/MS), which used 1,2-dibromopropane as the internal standard and methyl tertiary butyl ether (MTBE) as the extractant for high accuracy. The aspartic acid was used as the precursor of the DCAN formation during chlorination and the influencing factors were evaluated. The formation mechanism of DCAN was also discussed. The results showed that the DCAN amount increased with the increase of pH value under the neutral and acidic conditions, however, the amount of DCAN decreased with the increase of pH value under the alkali condition. And the final amount of DCAN under the alkali condition was much less than that under the neutral and acidic conditions. It was also found that the DCAN amount increased with the increase of chlorine addition, while the temperature in the range of 10-30°C had little influence on the DCAN formation. The formation process of the DCAN from aspartic acid by chlorination included seven steps, such as substitution, decarboxylation, oxidation, etc and ultimately formed DCAN.

  18. Responsive Surface Methodology Optimizes Extraction Conditions of Industrial by-products, Camellia japonica Seed Cake

    Science.gov (United States)

    Kim, Jae Kyeom; Lim, Ho-Jeong; Kim, Mi-So; Choi, Soo Jung; Kim, Mi-Jeong; Kim, Cho Rong; Shin, Dong-Hoon; Shin, Eui-Cheol

    2016-01-01

    Background: The central nervous system is easily damaged by oxidative stress due to high oxygen consumption and poor defensive capacity. Hence, multiple studies have demonstrated that inhibiting oxidative stress-induced damage, through an antioxidant-rich diet, might be a reasonable approach to prevent neurodegenerative disease. Objective: In the present study, response surface methodology was utilized to optimize the extraction for neuro-protective constituents of Camellia japonica byproducts. Materials and Methods: Rat pheochromocytoma cells were used to evaluate protective potential of Camellia japonica byproducts. Results: Optimum conditions were 33.84 min, 75.24%, and 75.82°C for time, ethanol concentration and temperature. Further, we demonstrated that major organic acid contents were significantly impacted by the extraction conditions, which may explain varying magnitude of protective potential between fractions. Conclusions: Given the paucity of information in regards to defatted C. japonica seed cake and their health promoting potential, our results herein provide interesting preliminary data for utilization of this byproduct from oil processing in both academic and industrial applications. SUMMARY Neuro-protective potential of C. japonica seed cake on cell viability was affected by extraction conditionsExtraction conditions effectively influenced on active constituents of C. japonica seed cakeBiological activity of C. japonica seed cake was optimized by the responsive surface methodology. Abbreviations used: GC-MS: Gas chromatography-mass spectrometer, MTT: 3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide, PC12 cells: Pheochromocytoma, RSM: Response surface methodology. PMID:27601847

  19. Evaluation of PAH contamination in soil treated with solid by-products from shale pyrolysis.

    Science.gov (United States)

    Nicolini, Jaqueline; Khan, Muhammad Y; Matsui, M; Côcco, Lílian C; Yamamoto, Carlos I; Lopes, Wilson A; de Andrade, Jailson B; Pillon, Clenio N; Arizaga, Gregorio G Carbajal; Mangrich, Antonio S

    2015-01-01

    The aim of this work was to evaluate the concentrations of polycyclic aromatic hydrocarbons (PAHs) in soils to which solid shale materials (SSMs) were added as soil conditioners. The SSMs were derived from the Petrosix pyrolysis process developed by Petrobras (Brazil). An improved ultrasonic agitation method was used to extract the PAHs from the solid samples (soils amended with SSMs), and the concentrations of the compounds were determined by gas chromatography coupled to mass spectrometry (GC-MS). The procedure provided satisfactory recoveries, detection limits, and quantification limits. The two-, three-, and four-ring PAHs were most prevalent, and the highest concentration was obtained for phenanthrene (978 ± 19 μg kg(-1) in a pyrolyzed shale sample). The use of phenanthrene/anthracene and fluoranthene/pyrene ratios revealed that the PAHs were derived from petrogenic rather than pyrogenic sources. The measured PAH concentrations did not exceed national or international limit values, suggesting that the use of SSMs as soil conditioners should not cause environmental damage.

  20. Natural Gas Market Hubs

    Data.gov (United States)

    Department of Homeland Security — A hub is a physical transfer point for natural gas where several pipelines are connected. A market center is a hub where the operator offers services that facilitate...

  1. Natural Gas Liquid Pipelines

    Data.gov (United States)

    Department of Homeland Security — Natural gas interstate and intrastate pipelines in the United States. Based on a variety of sources with varying scales and levels of accuracy and therefore accuracy...

  2. Treatment of Gas

    Science.gov (United States)

    ... Chlorophyllin for Odor Control Digestive enzymes, such as lactase supplements, actually help digest carbohydrates and may allow ... have no effect on intestinal gas. The enzyme lactase, which aids with lactose digestion, is available in ...

  3. Natural Gas Acquisition Program

    Data.gov (United States)

    General Services Administration — The "NGAP" system is a web based application which serves NGAP GSA users for tracking information details for various natural gas supply chain elements like Agency,...

  4. Gas insulated substations

    CERN Document Server

    2014-01-01

    This book provides an overview on the particular development steps of gas insulated high-voltage switchgear, and is based on the information given with the editor's tutorial. The theory is kept low only as much as it is needed to understand gas insulated technology, with the main focus of the book being on delivering practical application knowledge. It discusses some introductory and advanced aspects in the meaning of applications. The start of the book presents the theory of Gas Insulated Technology, and outlines reliability, design, safety, grounding and bonding, and factors for choosing GIS. The third chapter presents the technology, covering the following in detail: manufacturing, specification, instrument transformers, Gas Insulated Bus, and the assembly process. Next, the book goes into control and monitoring, which covers local control cabinet, bay controller, control schemes, and digital communication. Testing is explained in the middle of the book before installation and energization. Importantly, ...

  5. Gas accretion onto galaxies

    CERN Document Server

    Davé, Romeel

    2017-01-01

    This edited volume presents the current state of gas accretion studies from both observational and theoretical perspectives, and charts our progress towards answering the fundamental yet elusive question of how galaxies get their gas. Understanding how galaxies form and evolve has been a central focus in astronomy for over a century. These studies have accelerated in the new millennium, driven by two key advances: the establishment of a firm concordance cosmological model that provides the backbone on which galaxies form and grow, and the recognition that galaxies grow not in isolation but within a “cosmic ecosystem” that includes the vast reservoir of gas filling intergalactic space. This latter aspect in which galaxies continually exchange matter with the intergalactic medium via inflows and outflows has been dubbed the “baryon cycle”. The topic of this book is directly related to the baryon cycle, in particular its least well constrained aspect, namely gas accretion. Accretion is a rare area of ast...

  6. Gas turbine engine

    Energy Technology Data Exchange (ETDEWEB)

    Lawlor, Shawn P.; Roberts, II, William Byron

    2016-03-08

    A gas turbine engine with a compressor rotor having compressor impulse blades that delivers gas at supersonic conditions to a stator. The stator includes a one or more aerodynamic ducts that each have a converging portion and a diverging portion for deceleration of the selected gas to subsonic conditions and to deliver a high pressure oxidant containing gas to flameholders. The flameholders may be provided as trapped vortex combustors, for combustion of a fuel to produce hot pressurized combustion gases. The hot pressurized combustion gases are choked before passing out of an aerodynamic duct to a turbine. Work is recovered in a turbine by expanding the combustion gases through impulse blades. By balancing the axial loading on compressor impulse blades and turbine impulse blades, asymmetrical thrust is minimized or avoided.

  7. INFORMATION FOR GAS USERS

    CERN Multimedia

    Logistics Group

    2001-01-01

    The contractor for the supply and distribution of pressurised gases has drawn our attention to the large number of gas bottles and banks being stored on the site for increasingly long periods. Users are reminded that the rental charges for gas bottles and banks are based on a progressive rate depending on their period of use. To assist CERN in its efforts to optimise its operations in this field, you are kindly requested : to return empty or unused containers to the official gas distribution points as soon as possible, to try to limit reserve stocks, bearing in mind that standardised gases can be delivered within 36 hours. This will result in a higher turnover rate and in increased safety and will improve the availability of the gases. For all further enquiries, please contact Gas.Store@cern.ch by e-mail or call 72265. Thank you for your co-operation.

  8. Information for gas users

    CERN Multimedia

    2003-01-01

    The contractor for the supply and distribution of pressurised gases has drawn our attention to the large number of gas bottles and banks being stored on the site for increasingly long periods. Users are reminded that the rental charges for gas bottles and banks are based on a progressive rate depending on their period of use. To assist CERN in its efforts to optimise its operations in this field, you are kindly requested: - to return empty or unused containers to the official gas distribution points as soon as possible - to try to limit reserve stocks, bearing in mind that standardised gases can be delivered within 36 hours. This will result in a higher turnover rate and in increased safety and will improve the availability of the gases. For all further enquiries, please contact "Gas store" by e-mail. Thank you for your co-operation. Logistics Group SPL Division

  9. INFORMATION FOR GAS USERS

    CERN Multimedia

    Logistics Group

    2001-01-01

    The contractor for the supply and distribution of pressurised gases has drawn our attention to the large number of gas bottles and banks being stored on the site for increasingly long periods. Users are reminded that the rental charges for gas bottles and banks are based on a progressive rate depending on their period of use. To assist CERN in its efforts to optimise its operations in this field, you are kindly requested : to return empty or unused containers to the official gas distribution points as soon as possible, to try to limit reserve stocks, bearing in mind that standardised gases can be delivered within 36 hours. This will result in a higher turnover rate and in increased safety and will improve the availability of the gases. For all further enquiries, please contact Gas.Store@cern.ch by e-mail or call 72265. Thank you for your co-operation.

  10. Gas Transport in Bentonite

    Energy Technology Data Exchange (ETDEWEB)

    Villar, M. V.; Gutierre-Rodrigo, V.; Martin, P. I.; Romero, F. J.; Barcala, J. M.

    2013-07-01

    The gas permeability of the Spanish FEBEX bentonite compacted at dry densities of between 1.4 and 1.8 g/cm{sup 3} with high water contents was measured for different confining, injection and back pressures. The results were compared with results obtained in previous investigations for lower degrees of saturation. It was checked that gas permeability was greatly affected by dry density, decreasing about three orders of magnitude when it increased from 1.5 to 1.8 g/cm{sup 3} for similar water content. The increase of water content caused also a decrease in gas permeability. It was found that both gas permeability and the relative gas permeability were mainly related to the accessible porosity. These relationships could be fitted to potential expressions with exponents between 3 and 4, as well as the relationship between intrinsic permeability and void ratio. For gas pressures below 1.2 MPa no effect of the injection or confining pressures on the value of permeability was detected. For a given confining pressure the permeability value decreased as the effective pressure increased, especially if the increase in effective pressure was due to a decrease in gas back pressure. It was checked that the Klinkenberg effect was not significant for this material in the range of pressures applied in the tests. The gas breakthrough pressure values in FEBEX saturated bentonite were determined for different dry densities. They increased clearly with dry density and were always higher than the swelling pressure of the bentonite. In high density samples gas flow tended to stop abruptly after breakthrough, whereas in lower density samples gas flow decreased gradually until a given pressure gradient was reached. The permeabilities computed after breakthrough (which usually did not stabilise) were inversely related to dry density. This would indicate that, even if the flow took place predominantly through preferential pathways that sometimes closed quickly after breakthrough and others

  11. Removal Of Contaminants From Aqueous Solutions Using Hop (Humulus Lupulus L. Agricultural By-Products

    Directory of Open Access Journals (Sweden)

    Partelová Denisa

    2015-12-01

    Full Text Available Agricultural wastes can be used as an alternative to the existing sorbents for the removal of metals or synthetic dyes from contaminated liquids. In this work, the fine powdered biomass of the hop (Humulus lupulus L. variety Osvald's clone 72 and variety Bohemie as a sorbent for the removal of Cd from aqueous solutions of CdCl2 spiked with radionuclide 109Cd and synthetic dyes thioflavine T (ThT or methylene blue (MB from single dye solutions under conditions of batch systems was used. The maximum sorption capacity Q = 264 µmol Cd/g (d.w. was found in the case of the leaf biomass of hop (H. lupulus L. variety Osvald's clone 72 at the initial concentration of CdCl2 10,000 µmol/dm3, whereby the sorption capacity decreased in the order Qleaves : Qstems : Qroots = 1.0 : 0.8 : 0.7. The sorbed amount of Cd was removed from the hop biomass with the following increasing desorption efficiency of the extraction reagents: deionised H2O << 0.1 mol/dm3 HCl ≤ 0.1 mol/dm3 EDTA-Na2. Similarly as in the case of Cd sorption, the kinetics of ThT and MB sorption by the leaf biomass of the hop (H. lupulus L. variety Bohemie were also showed as two-phase processes. The maximum sorption of ThT approx. Q = 19 mg/g (d.w. and MB approx. Q = 70 mg/g (d.w. were found within the range of the initial values of pH 4 – 7. The sorption of both dyes by the leaf biomass from single dye solutions decreased with increasing biomass concentration and on the other hand increased with increasing the initial concentrations of ThT or MB. The process of ThT and MB sorption was better described by the Langmuir model than the Freundlich model of sorption isotherm. From the obtained values of Qmax, it was found that in the case of MB the dried leaf biomass showed more than 2-times higher sorption capacity (Qmax = 184 mg/g; d.w. in comparison with the value predicted for ThT. Obtained results suggest that dried plant biomass of hop (H. lupulus L. as agricultural by-products can be used

  12. Utilization of citrus crops processing by-products in the preparation of tarhana

    Directory of Open Access Journals (Sweden)

    Michal Magala

    2015-05-01

    Full Text Available After processing of citrus fruits (e.g. lemon, orange, grapefruit, mandarin for juice and essential oils production, approximately 50% of the original fruit mass is left as waste material. Citrus crops processing by-products are valuable components as they contain nutrients such as pectins, saccharides, carotenoids, some vitamins, minerals, polyphenols and substances with antioxidant activity. Utilisation of these kind of side products in the recipe of various cereal product led to enhancement of final product nutritional value and better sensory attributes as well as improvement of product functional properties. In this work was studied the effect of orange and mandarin dietary fibre application at level 5 and 10% (w/w in tarhana preparation and the influence on tarhana fermentation process. Chemical analysis showed, that dietary fibre preparations reached higher concentration of ash, fat and total dietary fibre compared to wheat flour. Wheat flour exhibited higher moisture content and protein concentration than citrus dietary fibre preparations. Orange and mandarin dietary fibre preparations showed higher values of water and oil absorption capacity, swelling capacity and least gellation concentration compared to wheat flour. Application of fruit dietary fibre preparations to tarhana recipe caused a rapid decrease in pH from 4.70 - 5.02 to values 4.31 - 4.51 during fermentation process. Reducing saccharides served as an available source of energy for fermenting microbiota and their concentration decreased from 24.5 - 32.8 to 2.2 - 0.2 g/kg after 144 h incubation. Fermentation also led to lactic acid (1.67 - 2.09 g/kg and acetic acid (1.91 - 2.53 g/kg production as a consequence of present microorganisms metabolic activity. Sensory evaluation of samples showed, that higher proportion of citrus dietary fibre preparations (10% negatively affected taste, odour, consistency and sourness. Among all prepared tarhana samples with proportion of citrus

  13. Secondary formation of disinfection by-products by UV treatment of swimming pool water

    Energy Technology Data Exchange (ETDEWEB)

    Spiliotopoulou, Aikaterini [Water ApS, Farum Gydevej 64, 3520 Farum (Denmark); Department of Environmental Engineering, Technical University of Denmark, Miljøvej, Building 113, 2800 Kongens Lyngby (Denmark); Hansen, Kamilla M.S., E-mail: kmsh@env.dtu.dk [Department of Environmental Engineering, Technical University of Denmark, Miljøvej, Building 113, 2800 Kongens Lyngby (Denmark); Andersen, Henrik R. [Department of Environmental Engineering, Technical University of Denmark, Miljøvej, Building 113, 2800 Kongens Lyngby (Denmark)

    2015-07-01

    Formation of disinfection by-products (DBPs) during experimental UV treatment of pool water has previously been reported with little concurrence between laboratory studies, field studies and research groups. In the current study, changes in concentration of seven out of eleven investigated volatile DBPs were observed in experiments using medium pressure UV treatment, with and without chlorine and after post-UV chlorination. Results showed that post-UV chlorine consumption increased, dose-dependently, with UV treatment dose. A clear absence of trihalomethane formation by UV and UV with chlorine was observed, while small yet statistically significant increases in dichloroacetonitrile and dichloropropanone concentrations were detected. Results indicate that post-UV chlorination clearly induced secondary formation of several DBPs. However, the formation of total trihalomethanes was no greater than what could be replicated by performing the DBP formation assay with higher chlorine concentrations to simulate extended chlorination. Post-UV chlorination of water from a swimming pool that continuously uses UV treatment to control combined chlorine could not induce secondary formation for most DBPs. Concurrence for induction of trihalomethanes was identified between post-UV chlorination treatments and simulated extended chlorination time treatment. Trihalomethanes could not be induced by UV treatment of water from a continuously UV treated pool. This indicates that literature reports of experimentally induced trihalomethane formation by UV may be a result of kinetic increase in formation by UV. However, this does not imply that higher trihalomethane concentrations would occur in pools that apply continuous UV treatment. The bromine fraction of halogens in formed trihalomethanes increased with UV dose. This indicates that UV removes bromine atoms from larger molecules that participate in trihalomethane production during post-UV chlorination. Additionally, no significant

  14. Protein co-products and by-products of the biodiesel industry for ruminants feeding

    Directory of Open Access Journals (Sweden)

    Ricardo Andrés Botero Carrera

    2012-05-01

    Full Text Available The objective of the experiment was to classify 20 protein co-products and by-products of the biodiesel industry with potential to use in ruminant feeding. The meals evaluated were: cottonseed, canudo-de-pito, crambe, sunflower, castor-oil seeds detoxified with calcium, non-detoxified castor-oil seeds and soybean; and the cakes were: cottonseed, peanut, babassu, crambe, palm oil, sunflower, licuri, macauba seeds, non-detoxified castor-oil seeds, turnip and jatropha. The samples were quantified to determine dry matter (DM, organic matter (OM, crude protein (CP, ether extract (EE, neutral detergent fiber corrected for ash and protein (NDFap, non-fiber carbohydrates (NFC, acid detergent fiber corrected for ash and protein (ADFap, lignin, cutin and starch levels. The CP profile was characterized in fractions A, B1, B2, B3 and C. The in vitro dry matter digestibility (IVDMD, in vitro neutral detergent fiber digestibility (IVNDFD, rumen degradable and undegradable protein, intestinal digestibility, indigestible neutral detergent fiber and undegradable neutral detergent insoluble protein were evaluated. The OM, CP, EE, NDFap, NFC, ADFap, lignin, cutin and starch contents varied from 81.95 to 95.41%, 18.92 to 57.75%, 0.56 to 18.40%, 10.13 to 62.30%, 3.89 to 27.88%, 6.15 to 36.86%, 1.19 to 5.04%, 0 to 17.87% and 0.68 to 14.50%, respectively. The values of fractions A, B1, B2, B3 and C ranged from 5.40 to 43.31%, 0.08 to 37.63%, 16.75 to 79.39%, 1.86 to 59.15% and 0.60 to 11.47%, respectively. Concentrations of IVDMD, IVNDFD, rumen-degradable and undegradable protein, intestinal digestibility, indigestible NDF and undegradable neutral detergent insoluble protein ranged from 31.00 to 95.92%, 55.04 to 97.74%, 41.06 to 97.61%, 2.39 to 58.94, 9.27 to 94.26%, 1.05 to 40.80% and 0.29 to 2.92%, respectively. Some of these products can replace soybean meal, specially the Macauba seeds cake, cottonseed meal and peanut and turnip cakes based on digestive

  15. Putative nanobacteria represent physiological remnants and culture by-products of normal calcium homeostasis.

    Directory of Open Access Journals (Sweden)

    John D Young

    structures described earlier as NB may thus represent remnants and by-products of physiological mechanisms used for calcium homeostasis, a concept which explains the vast body of NB literature as well as explains the true origin of NB as lifeless protein-mineralo entities with questionable role in pathogenesis.

  16. Altering the thermal resistance of foodborne bacterial pathogens with an eggshell membrane waste by-product.

    Science.gov (United States)

    Poland, A L; Sheldon, B W

    2001-04-01

    Eggshells from egg-breaking operations are a significant waste disposal problem. Thus, the development of value-added by-products from this waste would be welcomed by the industry. The ability of extracted eggshell membranes containing, several bacteriolytic enzymes (i.e., lysozyme and beta-N-acetylglucosaminidase) or other membrane components to alter the thermal resistance of gram-positive and gram-negative bacterial pathogens was evaluated. Mid-log phase cells of Salmonella Enteritidis (SE), Salmonella Typhimurium (ST), Escherichia coli O157:H7 (EC), Listeria monocytogenes Scott A (LM), and Staphylococcus aureus (SA) were suspended in 100 ml of 0.1% peptone water (pH 6.9, 10(7-8) CFU/ml) containing either 0 (control) or 10 g of an eggshell membrane extract and incubated at 37 degrees C for 45 min. Following exposure, membrane-free samples (1.5 ml) were heated in a 56 degrees C (LM, SA), 54 degrees C (SE, ST), or 52 degrees C (EC) water bath from 0 to 14 min in sealed glass reaction vials (12 by 32 mm), and the survivors were recovered on brain heart infusion agar. Population reductions ranging from 27.6% (SA) to 99.8% (LM) (ST, 43.8%; SE, 47.5%; EC, 71.8%) were observed for cells treated for 45 min with extracted membrane, as compared to controls. D-value reductions ranging from 0 (LM) to 87.2% (SE) (SA, 36.7%; EC, 83.3%; ST, 86.3%) were observed when membrane-treated cells were subsequently heat inactivated. The effects of exposure pH, time, temperature, and organic load on membrane activity were also evaluated with Salmonella Typhimurium. Exposure pH (5.0 versus 6.9), time (15 versus 45 min), and temperature (4 degrees C versus 37 degrees C) did not significantly reduce the impact of eggshell membranes on D-values. However, the presence of organic matter (0.1% peptone water versus skim milk) significantly reduced the thermal resistance-reducing capacity of the membranes. These preliminary findings provide information on the potential use of extracted eggshell

  17. Bioanalytical and chemical assessment of the disinfection by-product formation potential: role of organic matter.

    Science.gov (United States)

    Farré, Maria José; Day, Sophie; Neale, Peta A; Stalter, Daniel; Tang, Janet Y M; Escher, Beate I

    2013-09-15

    Disinfection by-products (DBP) formed from natural organic matter and disinfectants like chlorine and chloramine may cause adverse health effects. Here, we evaluate how the quantity and quality of natural organic matter and other precursors influence the formation of DBPs during chlorination and chloramination using a comprehensive approach including chemical analysis of regulated and emerging DBPs, total organic halogen quantification, organic matter characterisation and bioanalytical tools. In vitro bioassays allow us to assess the hazard potential of DBPs early in the chain of cellular events, when the DBPs react with their molecular target(s) and activate stress response and defence mechanisms. Given the reactive properties of known DBPs, a suite of bioassays targeting reactive modes of toxic action including genotoxicity and sensitive early warning endpoints such as protein damage and oxidative stress were evaluated in addition to cytotoxicity. Coagulated surface water was collected from three different drinking water treatment plants, along with reverse osmosis permeate from a desalination plant, and DBP formation potential was assessed after chlorination and chloramination. While effects were low or below the limit of detection before disinfection, the observed effects and DBP levels increased after disinfection and were generally higher after chlorination than after chloramination, indicating that chlorination forms higher concentrations of DBPs or more potent DBPs in the studied waters. Bacterial cytotoxicity, assessed using the bioluminescence inhibition assay, and induction of the oxidative stress response were the most sensitive endpoints, followed by genotoxicity. Source waters with higher dissolved organic carbon levels induced increased DBP formation and caused greater effects in the endpoints related to DNA damage repair, glutathione conjugation/protein damage and the Nrf2 oxidative stress response pathway after disinfection. Fractionation studies

  18. Putative nanobacteria represent physiological remnants and culture by-products of normal calcium homeostasis.

    Science.gov (United States)

    Young, John D; Martel, Jan; Young, Lena; Wu, Cheng-Yeu; Young, Andrew; Young, David

    2009-01-01

    earlier as NB may thus represent remnants and by-products of physiological mechanisms used for calcium homeostasis, a concept which explains the vast body of NB literature as well as explains the true origin of NB as lifeless protein-mineralo entities with questionable role in pathogenesis.

  19. Detecting animal by-product intake using stable isotope ratio mass spectrometry (IRMS).

    Science.gov (United States)

    da Silva, D A F; Biscola, N P; Dos Santos, L D; Sartori, M M P; Denadai, J C; da Silva, E T; Ducatti, C; Bicudo, S D; Barraviera, B; Ferreira, R S

    2016-11-01

    Sheep are used in many countries as food and for manufacturing bioproducts. However, when these animals consume animal by-products (ABP), which is widely prohibited, there is a risk of transmitting scrapie - a fatal prion disease in human beings. Therefore, it is essential to develop sensitive methods to detect previous ABP intake to select safe animals for producing biopharmaceuticals. We used stable isotope ratio mass spectrometry (IRMS) for (13)C and (15)N to trace animal proteins in the serum of three groups of sheep: 1 - received only vegetable protein (VP) for 89 days; 2 - received animal and vegetable protein (AVP); and 3 - received animal and vegetable protein with animal protein subsequently removed (AVPR). Groups 2 and 3 received diets with 30% bovine meat and bone meal (MBM) added to a vegetable diet (from days 16-89 in the AVP group and until day 49 in the AVPR group, when MBM was removed). The AVPR group showed (15)N equilibrium 5 days after MBM removal (54th day). Conversely, (15)N equilibrium in the AVP group occurred 22 days later (76th day). The half-life differed between these groups by 3.55 days. In the AVPR group, (15)N elimination required 53 days, which was similar to this isotope's incorporation time. Turnover was determined based on natural (15)N signatures. IRMS followed by turnover calculations was used to evaluate the time period for the incorporation and elimination of animal protein in sheep serum. The δ(13)C and δ(15)N values were used to track animal protein in the diet. This method is biologically and economically relevant for the veterinary field because it can track protein over time or make a point assessment of animal feed with high sensitivity and resolution, providing a low-cost analysis coupled with fast detection. Isotopic profiles could be measured throughout the experimental period, demonstrating the potential to use the method for traceability and certification assessments. Copyright © 2016 Elsevier Ltd. All rights

  20. Biochars made from agro-industrial by-products remove chlorine from water and wastewater

    Science.gov (United States)

    Tzachristas, Andreas; Manariotis, Ioannis D.; Karapanagioti, Hrissi K.

    2017-04-01

    Chlorination is the most common disinfection process for water and wastewater. For the industrial use of water in food production, chlorine can add undesired taste and odor to the final product. For this reason, dechlorination is desired for food industries that use municipal tap water. For treated wastewater discharge or reuse, chlorine can be toxic to the receiving aqueous systems and to the irrigated plants. In both the above cases, dechlorination is also required. Traditionally activated carbon has been used as the ideal material for the removal of chlorine. The main mechanisms that describe the interaction between activated carbon and HOCl or OCl- are described by the following equations (AWWA, 1990): HOCl + C* → C*O + H+ + Cl- (1), OCl- + C* → C*O + Cl- (2) Where C* and C*O represent the activated carbon surface and a surface oxide, respectively. The present study proposes the use of agro-industrial by-products for the production of biochars that will be used for dechlorination of tap-water used for food-industry production. Different raw materials such as malt spent rootlets, coffee residue, olive and grape seeds, etc. are used for the production of biochar. Various temperatures and air-to-solid ratios are tested for optimizing biochar production. Batch tests as well as a column test are employed to study the dechlorination kinetics of the different raw and biochar materials as well as those of commercial activated carbons. The removal kinetics are faster during the first hour; then, removal continues but with a slower rate. Most of the biochars tested (with 3 mg of solid in 20 mL of chlorine solution at initial concentration Co=1.5 mg/L) demonstrated removal efficiencies with an average of 9.4 ± 0.5 mg/g. For the two commercial activated carbons, removal efficiencies were 11.4 ± 0.2 mg/g. The first-order constant k1 ranged between 0.001 and 0.014 (min-1) for the biosorbents and the biochars and it was equal to 0.017 (min-1) for the commercial