WorldWideScience

Sample records for high-accuracy indexing table

  1. High accuracy flexural hinge development

    Science.gov (United States)

    Santos, I.; Ortiz de Zárate, I.; Migliorero, G.

    2005-07-01

    This document provides a synthesis of the technical results obtained in the frame of the HAFHA (High Accuracy Flexural Hinge Assembly) development performed by SENER (in charge of design, development, manufacturing and testing at component and mechanism levels) with EADS Astrium as subcontractor (in charge of doing an inventory of candidate applications among existing and emerging projects, establishing the requirements and perform system level testing) under ESA contract. The purpose of this project has been to develop a competitive technology for a flexural pivot, usuable in highly accurate and dynamic pointing/scanning mechanisms. Compared with other solutions (e.g. magnetic or ball bearing technologies) flexural hinges are the appropriate technology for guiding with accuracy a mobile payload over a limited angular ranges around one rotation axes.

  2. International Tables of Glycemic Index and Glycemic Load Values: 2008

    OpenAIRE

    Atkinson, Fiona S.; Foster-Powell, Kaye; Brand-Miller, Jennie C.

    2008-01-01

    OBJECTIVE—To systematically tabulate published and unpublished sources of reliable glycemic index (GI) values. RESEARCH DESIGN AND METHODS—A literature search identified 205 articles published between 1981 and 2007. Unpublished data were also included where the data quality could be verified. The data were separated into two lists: the first representing more precise data derived from testing healthy subjects and the second primarily from individuals with impaired glucose metabolism. RESULTS—...

  3. The Noncommutative Index Theorem and the Periodic Table for Disordered Topological Insulators and Superconductors

    CERN Document Server

    Katsura, Hosho

    2016-01-01

    We study a wide class of free-fermion systems on a hypercubic lattice in spatial dimensions $d\\ge 1$. When the system is insulating, the topological properties, e.g., the integral quantization of the topological invariant, are protected by certain symmetries of the Hamiltonian against disorder. This generic feature is characterized by a generalized index theorem which is a noncommutative analogue of the Atiyah-Singer index theorem. The noncommutative index defined in terms of a pair of projections gives a precise formula for the topological invariant in each symmetry class in any dimension ($d \\ge 1$). The analysis of the index reproduces Bott periodicity and possible values of topological invariants in the classification table of topological insulators and superconductors. We also prove that the indices are robust against perturbations that do not break the symmetry of the unperturbed Hamiltonian, provided the Fermi level lies in a spectral gap or a mobility gap.

  4. Influence of yeasts on the oil quality indexes of table olives.

    Science.gov (United States)

    Rodríguez-Gómez, Francisco; Bautista-Gallego, Joaquín; Romero-Gil, Verónica; Arroyo-López, Francisco Noé; Garrido-Fernández, Antonio

    2013-08-01

    After moisture, fat is the major constituent of table olives. However, scarce studies have been carried out to determine the influence of microorganisms and type of processing on the modification of their quality indexes. The present survey studies the influence of lipolytic (Candida boidinii TOMC Y5 and Wickerhamomyces anomalus TOMC Y10) and nonlipolytic (Debaryomyces etchellsii TOMC Y9 and Pichia galeiformis TOMC Y27) yeasts on the oil quality indexes of Manzanilla and Hojiblanca green fruits processed as directly brined and lye-treated table olives. Overall, the inocula scarcely used available sugars, except the lipolytic C. boidinii strain in lye-treated olives. Acetic acid production was limited in all conditions, except for the D. etchellsii strain in directly brined Manzanilla fruits. Ethanol formation was also reduced, although the W. anomalus (in both types of elaboration) and the C. boidinii (in lye-treated olives) strains produced significantly higher proportions. Apparently, changes in the oil quality indexes of processed olives were not related to the presence of yeasts, and hence, could have been caused by the endogenous activity of the fruits. A principal component analysis using the microbiological, physicochemical, and oil quality data supported this hypothesis, grouping treatments according to olive variety and type of elaboration, while segregation due to yeast inocula was not observed.

  5. Site-specific tolerance tables and indexing device to improve patient setup reproducibility.

    Science.gov (United States)

    McCullough, Kiernan T; James, Joshua A; Cetnar, Ashley J; McCullough, Mark A; Wang, Brian

    2015-01-01

    While the implementation of tools such as image-guidance and immobilization devices have helped to prevent geometric misses in radiation therapy, many treatments remain prone to error if these items are not available, not utilized for every fraction, or are misused. The purpose of this project is to design a set of site-specific treatment tolerance tables to be applied to the treatment couch for use in a record and verify (R&V) system that will insure accurate patient setup with minimal workflow interruption. This project also called for the construction of a simple indexing device to help insure reproducible patient setup for patients that could not be indexed with existing equipment. The tolerance tables were created by retrospective analysis on a total of 66 patients and 1,308 treatments, separating them into five categories based on disease site: lung, head and neck (H&N), breast, pelvis, and abdomen. Couch parameter tolerance tables were designed to encompass 95% of treatments, and were generated by calculating the standard deviation of couch vertical, longitudinal, and lateral values using the first day of treatment as a baseline. We also investigated an alternative method for generating the couch tolerances by updating the baseline values when patient position was verified with image guidance. This was done in order to adapt the tolerances to any gradual changes in patient setup that would not correspond with a mistreatment. The tolerance tables and customizable indexing device were then implemented for a trial period in order to determine the feasibility of the system. During this trial period we collected data from 1,054 fractions from 65 patients. We then analyzed the number of treatments that would have been out of tolerance, as well as whether or not the tolerances or setup techniques should be adjusted. When the couch baseline values were updated with every imaging fraction, the average rate of tolerance violations was 10% for the lung, H&N, abdomen

  6. Closure measuring technique on the datum of an end-tooth indexing table

    Science.gov (United States)

    Ling, Siying; Lou, Zhifeng; Wang, Liding

    2012-04-01

    The end-tooth indexing table (EIT) is widely used as angular reference in precision measurement or precision manufacturing fields. In order to improve the pitch accuracy of ultra-precision master gears, we designed an automatic end-tooth indexing system on a specific gear grinder. Theoretically, the indexing accuracy of an EIT can reach ±0.2″ or even more, which can meet the machining requirements of ultra-precision gears with pitch deviation up to grade 0 (ISO1328-1:1995). However, the axial and radial misalignment of an EIT to the spindle will decrease the indexing accuracy of the gear grinder. In order to solve this difficulty, precision measurement and lapping on the datum face of an EIT will be necessary. How to measure the parallelism deviation correctly at the datum of the mating face of the EIT will be another difficulty. Using the closure measuring technique which allows error separation, in this paper the measurement platform is set up, the data acquisition and handling method are presented and an experimental measurement is carried out. The maximum parallelism deviation, which is between the target face of an EIT and its mating face, was reduced from about 4 to 0.29 µm by adopting the closure measuring technique and precision lapping. It confirms that the closure measuring technique can implement precision measurement of dimensional measurands for an axisymmetric part.

  7. Growth models and site index table of natural Korean pine forests

    Institute of Scientific and Technical Information of China (English)

    Sun Yuwen; Li Shi; Cui Hong; Li Changsheng; Lju Peng; Zhang Junhua

    1999-01-01

    According to the growth characteristics of natural Korean pine (Pinus Koraiensis) forests, 6 equations such as Chapman-Richards equation, Logistic equation, Power equation, and so on were selected to fit for the growth models for Korean pine forest. The growth models were developed based on 208 random trees and 240 dominant trees. Results show that the Chapman-Richards equation is the best model for estimating tree height by age and DBH, while the Parabola equation is fittest for predicting DBH by age or estimating age from DBH The site index table of Korean pine forest was compiled by using the proportional method with the Chapman-Richards equation as the guide curve and validated by accuracy test.

  8. The Glycemic Index of Rice and Rice Products: A Review, and Table of GI Values.

    Science.gov (United States)

    Kaur, Bhupinder; Ranawana, Viren; Henry, Jeyakumar

    2016-01-01

    Rice is the principle staple and energy source for nearly half the world's population and therefore has significant nutrition and health implications. Rice is generally considered a high glycemic index (GI) food, however, this depends on varietal, compositional, processing, and accompaniment factors. Being a major contributor to the glycemic load in rice eating populations, there is increasing concern that the rising prevalence of insulin resistance is as a result of the consumption of large amounts of rice. Devising ways and means of reducing the glycemic impact of rice is therefore imperative. This review gathers studies examining the GI of rice and rice products and provides a critical overview of the current state of the art. A table collating published GI values for rice and rice products is also included.

  9. Influence of spatial temperature distribution on high accuracy interferometric metrology

    Science.gov (United States)

    Gu, Yongqiang; Miao, Erlong; Yan, Feng; Zhang, Jian; Yang, Huaijiang

    2010-10-01

    We calculate the influence of temperature change on the refractive index of air, establish a model of air temperature distribution and analyze the effect of different temperature distribution on the high accuracy interferometric metrology. First, a revised Edlen formula is employed to acquire the relation between temperature and refractive index of air, followed by introducing the fixed temperature gradient distribution among the spatial grid within the optical cavity between the reference flat and the test flat of the Fizeau interferometer, accompanied by a temperature change random function within each grid. Finally, all the rays through the air layer with different incident angles are traced by Matlab program in order to obtain the final output position, angle and OPD for each ray. The influence of different temperature distribution and the length of the optical cavity in on the testing accuracy can be analyzed through the RMS value that results from repeatable rays tracing. As a result, the horizontal distribution (vertical to optical axis) has a large effect on the testing accuracy. Thus, to realize the high accuracy figure metrology, the horizontal distribution of temperature must be rigorously controlled as well as to shorten the length of the optical cavity to a large extent. The results from our simulation are of great significant for the accuracy analysis of interferometric testing and the research of manufacturing a interferometer.

  10. High Accuracy Imaging Polarimetry with NICMOS

    CERN Document Server

    Batcheldor, D; Hines, D C; Schmidt, G D; Axon, D J; Robinson, A; Sparks, W; Tadhunter, C

    2008-01-01

    The ability of NICMOS to perform high accuracy polarimetry is currently hampered by an uncalibrated residual instrumental polarization at a level of 1.2-1.5%. To better quantify and characterize this residual we obtained observations of three polarimetric standard stars at three separate space-craft roll angles. Combined with archival data, these observations were used to characterize the residual instrumental polarization to enable NICMOS to reach its full polarimetric potential. Using these data, we calculate values of the parallel transmission coefficients that reproduce the ground-based results for the polarimetric standards. The uncertainties associated with the parallel transmission coefficients, a result of the photometric repeatability of the observations, dominate the accuracy of p and theta. However, the new coefficients now enable imaging polarimetry of targets with p~1.0% at an accuracy of +/-0.6% and +/-15 degrees.

  11. Computing High Accuracy Power Spectra with Pico

    CERN Document Server

    Fendt, William A

    2007-01-01

    This paper presents the second release of Pico (Parameters for the Impatient COsmologist). Pico is a general purpose machine learning code which we have applied to computing the CMB power spectra and the WMAP likelihood. For this release, we have made improvements to the algorithm as well as the data sets used to train Pico, leading to a significant improvement in accuracy. For the 9 parameter nonflat case presented here Pico can on average compute the TT, TE and EE spectra to better than 1% of cosmic standard deviation for nearly all $\\ell$ values over a large region of parameter space. Performing a cosmological parameter analysis of current CMB and large scale structure data, we show that these power spectra give very accurate 1 and 2 dimensional parameter posteriors. We have extended Pico to allow computation of the tensor power spectrum and the matter transfer function. Pico runs about 1500 times faster than CAMB at the default accuracy and about 250,000 times faster at high accuracy. Training Pico can be...

  12. High Accuracy Transistor Compact Model Calibrations

    Energy Technology Data Exchange (ETDEWEB)

    Hembree, Charles E. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Mar, Alan [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States); Robertson, Perry J. [Sandia National Laboratories (SNL-NM), Albuquerque, NM (United States)

    2015-09-01

    Typically, transistors are modeled by the application of calibrated nominal and range models. These models consists of differing parameter values that describe the location and the upper and lower limits of a distribution of some transistor characteristic such as current capacity. Correspond- ingly, when using this approach, high degrees of accuracy of the transistor models are not expected since the set of models is a surrogate for a statistical description of the devices. The use of these types of models describes expected performances considering the extremes of process or transistor deviations. In contrast, circuits that have very stringent accuracy requirements require modeling techniques with higher accuracy. Since these accurate models have low error in transistor descriptions, these models can be used to describe part to part variations as well as an accurate description of a single circuit instance. Thus, models that meet these stipulations also enable the calculation of quantifi- cation of margins with respect to a functional threshold and uncertainties in these margins. Given this need, new model high accuracy calibration techniques for bipolar junction transis- tors have been developed and are described in this report.

  13. Modification of a fire drought index for tropical wetland ecosystems by including water table depth

    NARCIS (Netherlands)

    Taufik, Muh; Setiawan, B.I.; Lanen, van H.A.J.

    2015-01-01

    In this paper, we discuss how an existing empirical drought index, i.e. the Keetch-Byram Drought Index (KBDI) that is commonly used for assessing forest fire danger, has been adjusted and modified for improved use in tropical wetland ecosystems. The improvement included: (i) adjustment of the dro

  14. 40 CFR Table 4 to Subpart G of... - Process Vents-Monitoring, Recordkeeping, and Reporting Requirements For Maintaining a TRE Index...

    Science.gov (United States)

    2010-07-01

    ..., and Reporting Requirements For Maintaining a TRE Index Value >1.0 and. â¤4.0 4 Table 4 to Subpart G of... for Organic Hazardous Air Pollutants From the Synthetic Organic Chemical Manufacturing Industry for... TRE Index Value >1.0 and. ≤4.0 Final recovery device Parameters to be monitored a Recordkeeping...

  15. A SINGLE STEP SCHEME WITH HIGH ACCURACY FOR PARABOLIC PROBLEM

    Institute of Scientific and Technical Information of China (English)

    陈传淼; 胡志刚

    2001-01-01

    A single step scheme with high accuracy for solving parabolic problem is proposed. It is shown that this scheme possesses good stability and fourth order accuracy with respect to both time and space variables, which are superconvergent.

  16. DIPSY, a low-cost GPS application with high accuracy

    NARCIS (Netherlands)

    Heijden, W.F.M. van der

    1998-01-01

    To improve the control of unmanned aircraft flying out of visual range, the controller needs to be provided with realtime information about the position and behaviour of the drone during the flight. The position of the drone has to be presented with a relative high accuracy to obtain accurate flight

  17. DIPSY, a low-cost GPS application with high accuracy

    NARCIS (Netherlands)

    Heijden, W.F.M. van der

    1999-01-01

    To improve the control of unmanned aircraft flying out of visual range, the controller needs to be provided with real-time information about the position and behaviour of the drone during the flight. The position of the drone has to be presented with a relative high accuracy to obtain accurate lligh

  18. DIPSY, a low-cost GPS application with high accuracy

    NARCIS (Netherlands)

    Heijden, W.F.M. van der

    1999-01-01

    To improve the control of unmanned aircraft flying out of visual range, the controller needs to be provided with real-time information about the position and behaviour of the drone during the flight. The position of the drone has to be presented with a relative high accuracy to obtain accurate lligh

  19. DIPSY, a low-cost GPS application with high accuracy

    NARCIS (Netherlands)

    Heijden, W.F.M. van der

    1998-01-01

    To improve the control of unmanned aircraft flying out of visual range, the controller needs to be provided with realtime information about the position and behaviour of the drone during the flight. The position of the drone has to be presented with a relative high accuracy to obtain accurate flight

  20. DIPSY, a low-cost GPS application with high accuracy

    NARCIS (Netherlands)

    Heijden, W.F.M. van der

    1999-01-01

    To improve the control of unmanned aircraft flying out of visual range, the controller needs to be provided with real-time information about the position and behaviour of the drone during the flight. The position of the drone has to be presented with a relative high accuracy to obtain accurate

  1. Body Mass Index Table

    Science.gov (United States)

    ... Clinical Practice Guidelines Resources Continuing Education Funding Training & Career Development Division of Intramural Research Research Resources Scientific Reports Technology Transfer What are Clinical Trials? Children & Clinical Studies NHLBI Trials Clinical Trial Websites Press ...

  2. High accuracy NURBS interpolation for five-axis machine of table-rotating/spindle-tilting type

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, the definition of NURBS curve and a speed-controlled interpolation in which the feed rate is automatically adjusted in order to meet the specified chord error limit were discussed. Besides those, a definition of linear interpolation error of post-processed data was proposed, which should be paid more attention to because it will not only reduce quality of the surface but also may cause interference and other unexpected trouble. In order to control the error, a robust algorithm was proposed, which successfully met a desired error limit through interpolating some essential CL data. The excellence of the proposed algorithm, in terms of its reliability and self-adaptiveness, has been proved by simulation results.

  3. High accuracy NURBS interpolation for five-axis machine of table-rotating/spindle-tilting type

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    In this paper, the definition of NURBS curve and a speed-controlled interpolation in which the feed rate is automatically adjusted in order to meet the specified chord error limit were discussed. Besides those, a definition of linear interpolation error of post-processed data was proposed, which should be paid more attention to because it will not only reduce quality of the surface but also may cause interference and other unexpected trouble. In order to control the error, a robust algorithm was proposed, w...

  4. High Accuracy Near-infrared Imaging Polarimetry with NICMOS

    CERN Document Server

    Batcheldor, D; Hines, D C; Schmidt, G D; Axon, D J; Robinson, A; Sparks, W; Tadhunter, C

    2008-01-01

    The findings of a nine orbit calibration plan carried out during HST Cycle 15, to fully determine the NICMOS camera 2 (2.0 micron) polarization calibration to high accuracy, are reported. Recently Ueta et al. and Batcheldor et al. have suggested that NICMOS possesses a residual instrumental polarization at a level of 1.2-1.5%. This would completely inhibit the data reduction in a number of GO programs, and hamper the ability of the instrument to perform high accuracy polarimetry. We obtained polarimetric calibration observations of three polarimetric standards at three spacecraft roll angles separated by ~60deg. Combined with archival data, these observations were used to characterize the residual instrumental polarization in order for NICMOS to reach its full potential of accurate imaging polarimetry at p~1%. Using these data, we place an 0.6% upper limit on the instrumental polarization and calculate values of the parallel transmission coefficients that reproduce the ground-based results for the polarimetri...

  5. Navigation message designing with high accuracy for NAV

    Institute of Scientific and Technical Information of China (English)

    Wang Luxiao; Huang Zhigang; Zhao Yun

    2014-01-01

    Navigation message designing with high accuracy guarantee is the key to efficient navi-gation message distribution in the global navigation satellite system (GNSS). Developing high accu-racy-aware navigation message designing algorithms is an important topic. This paper investigates the high-accuracy navigation message designing problem with the message structure unchanged. The contributions made in this paper include a heuristic that employs the concept of the estimated range deviation (ERD) to improve the existing well-known navigation message on L1 frequency (NAV) of global positioning system (GPS) for good accuracy service; a numerical analysis approximation method (NAAM) to evaluate the range error due to truncation (RET) of different navigation messages; and a basic positioning parameters designing algorithm in the limited space allocation. Based on the predicted ultra-rapid data from the ultra-rapid data from the international GPS service for geodynamic (IGU), ERDs are generated in real time for error correction. Simulations show that the algorithms developed in this paper are general and flexible, and thus are applicable to NAV improvement and other navigation message designs.

  6. Systematic Calibration for Ultra-High Accuracy Inertial Measurement Units.

    Science.gov (United States)

    Cai, Qingzhong; Yang, Gongliu; Song, Ningfang; Liu, Yiliang

    2016-06-22

    An inertial navigation system (INS) has been widely used in challenging GPS environments. With the rapid development of modern physics, an atomic gyroscope will come into use in the near future with a predicted accuracy of 5 × 10(-6)°/h or better. However, existing calibration methods and devices can not satisfy the accuracy requirements of future ultra-high accuracy inertial sensors. In this paper, an improved calibration model is established by introducing gyro g-sensitivity errors, accelerometer cross-coupling errors and lever arm errors. A systematic calibration method is proposed based on a 51-state Kalman filter and smoother. Simulation results show that the proposed calibration method can realize the estimation of all the parameters using a common dual-axis turntable. Laboratory and sailing tests prove that the position accuracy in a five-day inertial navigation can be improved about 8% by the proposed calibration method. The accuracy can be improved at least 20% when the position accuracy of the atomic gyro INS can reach a level of 0.1 nautical miles/5 d. Compared with the existing calibration methods, the proposed method, with more error sources and high order small error parameters calibrated for ultra-high accuracy inertial measurement units (IMUs) using common turntables, has a great application potential in future atomic gyro INSs.

  7. Systematic Calibration for Ultra-High Accuracy Inertial Measurement Units

    Directory of Open Access Journals (Sweden)

    Qingzhong Cai

    2016-06-01

    Full Text Available An inertial navigation system (INS has been widely used in challenging GPS environments. With the rapid development of modern physics, an atomic gyroscope will come into use in the near future with a predicted accuracy of 5 × 10−6°/h or better. However, existing calibration methods and devices can not satisfy the accuracy requirements of future ultra-high accuracy inertial sensors. In this paper, an improved calibration model is established by introducing gyro g-sensitivity errors, accelerometer cross-coupling errors and lever arm errors. A systematic calibration method is proposed based on a 51-state Kalman filter and smoother. Simulation results show that the proposed calibration method can realize the estimation of all the parameters using a common dual-axis turntable. Laboratory and sailing tests prove that the position accuracy in a five-day inertial navigation can be improved about 8% by the proposed calibration method. The accuracy can be improved at least 20% when the position accuracy of the atomic gyro INS can reach a level of 0.1 nautical miles/5 d. Compared with the existing calibration methods, the proposed method, with more error sources and high order small error parameters calibrated for ultra-high accuracy inertial measurement units (IMUs using common turntables, has a great application potential in future atomic gyro INSs.

  8. Researching the technology of high-accuracy camshaft measurement

    Science.gov (United States)

    Chen, Wei; Chen, Yong-Le; Wang, Hong; Liao, Hai-Yang

    1996-10-01

    This paper states the cam's data processing algorithm in detail in high accurate camshaft measurement system. It contains: 1) using minimum error of curve symmetry to seek the center position of the key slot; 2) Calculating the minimum error by cam's curve in theory to search top area; 3) According to cam's tolerance E(i) function and minimum angle error at cam top, seeking the best position of cam top and getting the best angle value and error curve. The algorithm is suitable for measuring all kinds of symmetry or asymmetry cam, and plain push-rod or spherical push-rod cam, for example, bus camshaft, car camshaft, motor camshaft, etc. Using the algorithm, high accuracy measurement can be achieved.

  9. Read-only high accuracy volume holographic optical correlator

    Science.gov (United States)

    Zhao, Tian; Li, Jingming; Cao, Liangcai; He, Qingsheng; Jin, Guofan

    2011-10-01

    A read-only volume holographic correlator (VHC) is proposed. After the recording of all of the correlation database pages by angular multiplexing, a stand-alone read-only high accuracy VHC will be separated from the VHC recording facilities which include the high-power laser and the angular multiplexing system. The stand-alone VHC has its own low power readout laser and very compact and simple structure. Since there are two lasers that are employed for recording and readout, respectively, the optical alignment tolerance of the laser illumination on the SLM is very sensitive. The twodimensional angular tolerance is analyzed based on the theoretical model of the volume holographic correlator. The experimental demonstration of the proposed read-only VHC is introduced and discussed.

  10. Compensation of motion error in a high accuracy AFM

    Science.gov (United States)

    Cui, Yuguo; Arai, Yoshikazu; He, Gaofa; Asai, Takemi; Gao, Wei

    2008-10-01

    An atomic force microscope (AFM) system is used for large-area measurement with a spiral scanning strategy, which is composed of an air slide, an air spindle and a probe unit. The motion error which is brought from the air slide and the air spindle will increase with the increasing of the measurement area. Then the measurement accuracy will decrease. In order to achieve a high speed and high accuracy measurement, the probe scans along X-direction with constant height mode driven by the air slide, and at the same time, based on the change way of the motion error, it moves along Zdirection conducted by piezoactuator. According to the above method of error compensation, the profile measurement experiment of a micro-structured surface has been carried out. The experimental result shows that this method is effective for eliminating motion error, and it can achieve high speed and precision measurement of micro-structured surface.

  11. High accuracy autonomous navigation using the global positioning system (GPS)

    Science.gov (United States)

    Truong, Son H.; Hart, Roger C.; Shoan, Wendy C.; Wood, Terri; Long, Anne C.; Oza, Dipak H.; Lee, Taesul

    1997-01-01

    The application of global positioning system (GPS) technology to the improvement of the accuracy and economy of spacecraft navigation, is reported. High-accuracy autonomous navigation algorithms are currently being qualified in conjunction with the GPS attitude determination flyer (GADFLY) experiment for the small satellite technology initiative Lewis spacecraft. Preflight performance assessments indicated that these algorithms are able to provide a real time total position accuracy of better than 10 m and a velocity accuracy of better than 0.01 m/s, with selective availability at typical levels. It is expected that the position accuracy will be increased to 2 m if corrections are provided by the GPS wide area augmentation system.

  12. Spatial augmented reality based high accuracy human face projection

    Science.gov (United States)

    Li, Dong; Xie, Jinghui; Li, Yufeng; Weng, Dongdong; Liu, Yue

    2015-08-01

    This paper discusses the imaging principles and the technical difficulties of spatial augmented reality based human face projection. A novel geometry correction method is proposed to realize fast, high-accuracy face model projection. Using a depth camera to reconstruct the projected object, the relative position from the rendered model to the projector can be accessed and the initial projection image is generated. Then the projected image is distorted by using Bezier interpolation to guarantee that the projected texture matches with the object surface. The proposed method is under a simple process flow and can achieve high perception registration of virtual and real object. In addition, this method has a good performance in the condition that the reconstructed model is not exactly same with the rendered virtual model which extends its application area in the spatial augmented reality based human face projection.

  13. 长白落叶松人工林立地指数表和胸径地位级表的编制%Compilation of Site Index Table and Site Class Table for Larix olgensis Plantations

    Institute of Scientific and Technical Information of China (English)

    马炜; 孙玉军

    2013-01-01

    The forest management inventory data were used to analyze the main distribution of site conditions for Larix olgensis plantations .The data of sample and analysis trees ( including dominant and mean trees ) from 27 sample plots in various site conditions were used to construct site index table and site class table by fitting the generalized mathematical models of age and height or diameter (D, diameter at breast height).The logarithm curve equations are the best fit among other se-lected curves.The standard age is identified as 30 years, and 10 index classes are divided within 12-21 m.Based on dominant height and mean D data, site index table and site class table are constructed by the expansion of the guide curve by using comparative dominant height and numerical expression methods, respectively.Both tables are applicable and ac-curate in evaluating forest quality and predicting the growth of L.olgensis plantations , and also can provide valuable data and theory foundation for evaluating site quality.%在通过二类清查数据分析长白落叶松人工林主要立地条件的基础上,利用27块包含未成林期和幼、中、近熟、成熟4个龄级调查样地的样木和解析木基础数据资料,结合树高、胸径与年龄关系的常用树木生长模型,采用相对优势高法编制了长白落叶松人工林的立地指数表,并采用数式法编制了胸径地位级表。结果表明:对数曲线方程lnH=3.130lnA-1.041和lnD=9.605lnA-16.307分别是立地指数和胸径地位级的最适合的导向拟合曲线。以30 a为长白落叶松标准年龄,在12~21 m范围内划分10个立地指数级,编制形成立地指数表和胸径地位级表。检验结果表明所编制的数表精度高、适用性强,可全面、客观地评价该地区长白落叶松人工林林分,也为立地质量评定提供基础数据和理论依据。编制的胸径地位级表,不但能预测不同立地条件下林木胸径生

  14. High accuracy mantle convection simulation through modern numerical methods

    KAUST Repository

    Kronbichler, Martin

    2012-08-21

    Numerical simulation of the processes in the Earth\\'s mantle is a key piece in understanding its dynamics, composition, history and interaction with the lithosphere and the Earth\\'s core. However, doing so presents many practical difficulties related to the numerical methods that can accurately represent these processes at relevant scales. This paper presents an overview of the state of the art in algorithms for high-Rayleigh number flows such as those in the Earth\\'s mantle, and discusses their implementation in the Open Source code Aspect (Advanced Solver for Problems in Earth\\'s ConvecTion). Specifically, we show how an interconnected set of methods for adaptive mesh refinement (AMR), higher order spatial and temporal discretizations, advection stabilization and efficient linear solvers can provide high accuracy at a numerical cost unachievable with traditional methods, and how these methods can be designed in a way so that they scale to large numbers of processors on compute clusters. Aspect relies on the numerical software packages deal.II and Trilinos, enabling us to focus on high level code and keeping our implementation compact. We present results from validation tests using widely used benchmarks for our code, as well as scaling results from parallel runs. © 2012 The Authors Geophysical Journal International © 2012 RAS.

  15. Novel method for high accuracy figure measurement of optical flat

    Science.gov (United States)

    E, Kewei; Li, Dahai; Yang, Lijie; Guo, Guangrao; Li, Mengyang; Wang, Xuemin; Zhang, Tao; Xiong, Zhao

    2017-01-01

    Phase Measuring Deflectometry (PMD) is a non-contact, high dynamic-range and full-field metrology which becomes a serious competitor to interferometry. However, the accuracy of deflectometry metrology is strongly influenced by the level of the calibrations, including test geometry, imaging pin-hole camera and digital display. In this paper, we propose a novel method that can measure optical flat surface figure to a high accuracy. We first calibrate the camera using a checker pattern shown on a LCD display at six different orientations, and the last orientation is aligned at the same position as the test optical flat. By using this method, lens distortions and the mapping relationship between the CCD pixels and the subaperture coordinates on the test optical flat can be determined at the same time. To further reduce the influence of the calibration errors on measurements, a reference optical flat with a high quality surface is measured, and then the system errors in our PMD setup can be eliminated by subtracting the figure of the reference flat from the figure of the test flat. Although any expensive coordinates measuring machine, such as laser tracker and coordinates measuring machine are not applied in our measurement, our experimental results of optical flat figure from low to high order aberrations still show a good agreement with that from the Fizeau interferometer.

  16. High-accuracy mass spectrometry for fundamental studies.

    Science.gov (United States)

    Kluge, H-Jürgen

    2010-01-01

    Mass spectrometry for fundamental studies in metrology and atomic, nuclear and particle physics requires extreme sensitivity and efficiency as well as ultimate resolving power and accuracy. An overview will be given on the global status of high-accuracy mass spectrometry for fundamental physics and metrology. Three quite different examples of modern mass spectrometric experiments in physics are presented: (i) the retardation spectrometer KATRIN at the Forschungszentrum Karlsruhe, employing electrostatic filtering in combination with magnetic-adiabatic collimation-the biggest mass spectrometer for determining the smallest mass, i.e. the mass of the electron anti-neutrino, (ii) the Experimental Cooler-Storage Ring at GSI-a mass spectrometer of medium size, relative to other accelerators, for determining medium-heavy masses and (iii) the Penning trap facility, SHIPTRAP, at GSI-the smallest mass spectrometer for determining the heaviest masses, those of super-heavy elements. Finally, a short view into the future will address the GSI project HITRAP at GSI for fundamental studies with highly-charged ions.

  17. High Accuracy Monocular SFM and Scale Correction for Autonomous Driving.

    Science.gov (United States)

    Song, Shiyu; Chandraker, Manmohan; Guest, Clark C

    2016-04-01

    We present a real-time monocular visual odometry system that achieves high accuracy in real-world autonomous driving applications. First, we demonstrate robust monocular SFM that exploits multithreading to handle driving scenes with large motions and rapidly changing imagery. To correct for scale drift, we use known height of the camera from the ground plane. Our second contribution is a novel data-driven mechanism for cue combination that allows highly accurate ground plane estimation by adapting observation covariances of multiple cues, such as sparse feature matching and dense inter-frame stereo, based on their relative confidences inferred from visual data on a per-frame basis. Finally, we demonstrate extensive benchmark performance and comparisons on the challenging KITTI dataset, achieving accuracy comparable to stereo and exceeding prior monocular systems. Our SFM system is optimized to output pose within 50 ms in the worst case, while average case operation is over 30 fps. Our framework also significantly boosts the accuracy of applications like object localization that rely on the ground plane.

  18. Indexed

    CERN Document Server

    Hagy, Jessica

    2008-01-01

    Jessica Hagy is a different kind of thinker. She has an astonishing talent for visualizing relationships, capturing in pictures what is difficult for most of us to express in words. At indexed.blogspot.com, she posts charts, graphs, and Venn diagrams drawn on index cards that reveal in a simple and intuitive way the large and small truths of modern life. Praised throughout the blogosphere as “brilliant,” “incredibly creative,” and “comic genius,” Jessica turns her incisive, deadpan sense of humor on everything from office politics to relationships to religion. With new material along with some of Jessica’s greatest hits, this utterly unique book will thrill readers who demand humor that makes them both laugh and think.

  19. SU-C-19A-06: A Robust and Affordable Table Indexing Approach for Total Lymphoid Irradiation Treatment

    Energy Technology Data Exchange (ETDEWEB)

    Yu, S; Fahimian, B; Kenyon, M; Hsu, A [Stanford University, Stanford, CA (United States)

    2014-06-15

    Purpose: Total lymphoid irradiation (TLI) is conventionally delivered through the dosimetric matching of mantle, spleen, and pelvis fields, necessitating multiple isocenters delivered through a combination of couch shifts and sliding of patients relative to the couch rendering the technique susceptible to shifting errors. To address this challenge, a novel technique for the couch indexing of TLI treatments is developed and evaluated through a multi-patient pilot trial. Methods: An immobilization device was designed consisting of a movable indexed slide board with an Exact Lok-Bar drilled into it. A Timo headrests were used fixate the head of the patient relative to the slide board. For the Varian Exact Couch™, the immobilization board was connected to the H3 notch to avoid the metal infrastructure of the couch for the delivery of the mantle and spleen fields. For tall patients the required shift for the pelvis isocenter reaches the shifting limit and the board was slid from H3 to H4 (a fixed distance of 14 cm). A total 22 patients were stratified in two groups of 11, one consisting of the conventional setup, and one group with the proposed immobilization technique. Results: The standard deviations (SD) of the couch positions in lateral, longitudinal, and vertical directions for 10 fractions for each patient in both groups were calculated. In the non-indexed group, the positioning SD ranged from 0.9 to 4.7 cm. Using our device, the positioning SD was reduced to a range of 0.2 to 0.9 cm, with the longitudinal direction showing the largest improvement. Conclusion: Matched field TLI remains error prone to geometrical misses. The feasibility of full indexing TLI treatments was validated and shown to result in a significant reduction of positioning errors.

  20. Spline-based high-accuracy piecewise-polynomial phase-to-sinusoid amplitude converters.

    Science.gov (United States)

    Petrinović, Davor; Brezović, Marko

    2011-04-01

    We propose a method for direct digital frequency synthesis (DDS) using a cubic spline piecewise-polynomial model for a phase-to-sinusoid amplitude converter (PSAC). This method offers maximum smoothness of the output signal. Closed-form expressions for the cubic polynomial coefficients are derived in the spectral domain and the performance analysis of the model is given in the time and frequency domains. We derive the closed-form performance bounds of such DDS using conventional metrics: rms and maximum absolute errors (MAE) and maximum spurious free dynamic range (SFDR) measured in the discrete time domain. The main advantages of the proposed PSAC are its simplicity, analytical tractability, and inherent numerical stability for high table resolutions. Detailed guidelines for a fixed-point implementation are given, based on the algebraic analysis of all quantization effects. The results are verified on 81 PSAC configurations with the output resolutions from 5 to 41 bits by using a bit-exact simulation. The VHDL implementation of a high-accuracy DDS based on the proposed PSAC with 28-bit input phase word and 32-bit output value achieves SFDR of its digital output signal between 180 and 207 dB, with a signal-to-noise ratio of 192 dB. Its implementation requires only one 18 kB block RAM and three 18-bit embedded multipliers in a typical field-programmable gate array (FPGA) device.

  1. Researches on High Accuracy Prediction Methods of Earth Orientation Parameters

    Science.gov (United States)

    Xu, X. Q.

    2015-09-01

    The Earth rotation reflects the coupling process among the solid Earth, atmosphere, oceans, mantle, and core of the Earth on multiple spatial and temporal scales. The Earth rotation can be described by the Earth's orientation parameters, which are abbreviated as EOP (mainly including two polar motion components PM_X and PM_Y, and variation in the length of day ΔLOD). The EOP is crucial in the transformation between the terrestrial and celestial reference systems, and has important applications in many areas such as the deep space exploration, satellite precise orbit determination, and astrogeodynamics. However, the EOP products obtained by the space geodetic technologies generally delay by several days to two weeks. The growing demands for modern space navigation make high-accuracy EOP prediction be a worthy topic. This thesis is composed of the following three aspects, for the purpose of improving the EOP forecast accuracy. (1) We analyze the relation between the length of the basic data series and the EOP forecast accuracy, and compare the EOP prediction accuracy for the linear autoregressive (AR) model and the nonlinear artificial neural network (ANN) method by performing the least squares (LS) extrapolations. The results show that the high precision forecast of EOP can be realized by appropriate selection of the basic data series length according to the required time span of EOP prediction: for short-term prediction, the basic data series should be shorter, while for the long-term prediction, the series should be longer. The analysis also showed that the LS+AR model is more suitable for the short-term forecasts, while the LS+ANN model shows the advantages in the medium- and long-term forecasts. (2) We develop for the first time a new method which combines the autoregressive model and Kalman filter (AR+Kalman) in short-term EOP prediction. The equations of observation and state are established using the EOP series and the autoregressive coefficients

  2. High Accuracy Wavelength Calibration For A Scanning Visible Spectrometer

    Energy Technology Data Exchange (ETDEWEB)

    Filippo Scotti and Ronald Bell

    2010-07-29

    Spectroscopic applications for plasma velocity measurements often require wavelength accuracies ≤ 0.2Â. An automated calibration for a scanning spectrometer has been developed to achieve a high wavelength accuracy overr the visible spectrum, stable over time and environmental conditions, without the need to recalibrate after each grating movement. The method fits all relevant spectrometer paraameters using multiple calibration spectra. With a steping-motor controlled sine-drive, accuracies of ~0.025 Â have been demonstrated. With the addition of high resolution (0.075 aresec) optical encoder on the grading stage, greater precision (~0.005 Â) is possible, allowing absolute velocity measurements with ~0.3 km/s. This level of precision requires monitoring of atmospheric temperature and pressure and of grating bulk temperature to correct for changes in the refractive index of air and the groove density, respectively.

  3. High-accuracy extrapolated ab initio thermochemistry. II. Minor improvements to the protocol and a vital simplification

    Science.gov (United States)

    Bomble, Yannick J.; Vázquez, Juana; Kállay, Mihály; Michauk, Christine; Szalay, Péter G.; Császár, Attila G.; Gauss, Jürgen; Stanton, John F.

    2006-08-01

    The recently developed high-accuracy extrapolated ab initio thermochemistry method for theoretical thermochemistry, which is intimately related to other high-precision protocols such as the Weizmann-3 and focal-point approaches, is revisited. Some minor improvements in theoretical rigor are introduced which do not lead to any significant additional computational overhead, but are shown to have a negligible overall effect on the accuracy. In addition, the method is extended to completely treat electron correlation effects up to pentuple excitations. The use of an approximate treatment of quadruple and pentuple excitations is suggested; the former as a pragmatic approximation for standard cases and the latter when extremely high accuracy is required. For a test suite of molecules that have rather precisely known enthalpies of formation {as taken from the active thermochemical tables of Ruscic and co-workers [Lecture Notes in Computer Science, edited by M. Parashar (Springer, Berlin, 2002), Vol. 2536, pp. 25-38; J. Phys. Chem. A 108, 9979 (2004)]}, the largest deviations between theory and experiment are 0.52, -0.70, and 0.51kJmol-1 for the latter three methods, respectively. Some perspective is provided on this level of accuracy, and sources of remaining systematic deficiencies in the approaches are discussed.

  4. EJSCREEN National Percentiles Lookup Table--2015 Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — The USA table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the national...

  5. EJSCREEN States Percentiles Lookup Table--2015 Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — The States table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the state...

  6. EJSCREEN Regions Percentiles Lookup Table--2015 Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regions table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the EPA...

  7. EJSCREEN National Percentiles Lookup Table--2015 Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — The USA table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the national...

  8. EJSCREEN Regions Percentiles Lookup Table--2015 Intranet

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regions table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the EPA...

  9. High Accuracy Extraction of Respiratory Sinus Arrhythmia with Statistical Processing using Normal Distribution

    Science.gov (United States)

    Numata, Takashi; Ogawa, Yutaro; Yoshida, Lui; Kotani, Kiyoshi; Jimbo, Yasuhiko

    The autonomic nervous system is important in maintaining homeostasis by mediating the opposing effects of the sympathetic and parasympathetic nervous activity on organs. Although it is known that the amplitude of RSA (Respiratory Sinus Arrhythmia) is an index of parasympathetic nervous activity, it is difficult to estimate that activity in real-time in everyday situations. It is partly caused by body motions and extrasystoles. Also, automatic recognition of the R-wave on electrocardiograms is required for real-time analysis of RSA amplitude, there is an unresolved problem of false recognition of the R-wave. In this paper, we propose a method to evaluate the amplitude of RSA accurately using statistical processing with probabilistic models. Then, we estimate parasympathetic nervous activity during body motion and isometric exercise to examine the validity of the method. As a result, using the proposed method, we demonstrate that the amplitude of RSA can be extracted with false recognition of the R-wave. In addition, an appropriate threshold for the estimate is one or five percent because waveforms of RSA amplitude do not follow the abrupt changes of the parasympathetic nervous activity evoked by isometric exercise with the threshold at ten percent. Furthermore, the method using normal distribution is found to be more appropriate than that of chi-square distribution for statistical processing. Therefore, we expect that the proposed method can evaluate parasympathetic nervous activity with high accuracy in everyday situations.

  10. The Impact of Ionospheric Disturbances on High Accuracy Positioning in Brazil

    Science.gov (United States)

    Yang, L.; Park, J.; Susnik, A.; Aquino, M. H.; Dodson, A.

    2013-12-01

    High positioning accuracy is a key requirement to a number of applications with a high economic impact, such as precision agriculture, surveying, geodesy, land management, off-shore operations. Global Navigation Satellite Systems (GNSS) carrier phase measurement based techniques, such as Real Time Kinematic (RTK), Network-RTK (NRTK) and Precise Point Positioning (PPP), have played an important role in providing centimetre-level positioning accuracy, and become the core of the above applications. However these techniques are especially sensitive to ionospheric perturbations, in particular scintillation. Brazil sits in one of the most affected regions of the Earth and can be regarded as a test-bed for scenarios of the severe ionospheric condition. Over the Brazilian territory, the ionosphere behaves in a considerably unpredictable way and scintillation activity is very prominent, occurring especially after sunset hours. NRTK services may not be able to provide satisfactory accuracy, or even continuous positioning during strong scintillation periods. CALIBRA (Countering GNSS high Accuracy applications Limitations due to Ionospheric disturbances in BRAzil) started in late 2012 and is a project funded by the GSA (European GNSS Agency) and the European Commission under the Framework Program 7 to deliver improvements on carrier phase based high accuracy algorithms and their implementation in GNSS receivers, aiming to counter the adverse ionospheric effects over Brazil. As the first stage of this project, the ionospheric disturbances, which affect the applications of RTK, NRTK or PPP, are characterized. Typical problems include degraded positioning accuracy, difficulties in ambiguity fixing, NRTK network interpolation errors, long PPP convergence time etc. It will identify how GNSS observables and existing algorithms are degraded by ionosphere related phenomena, evaluating the impact on positioning techniques in terms of accuracy, integrity and availability. Through the

  11. High-accuracy determination for optical indicatrix rotation in ferroelectric DTGS

    OpenAIRE

    O.S.Kushnir; O.A.Bevz; O.G.Vlokh

    2000-01-01

    Optical indicatrix rotation in deuterated ferroelectric triglycine sulphate is studied with the high-accuracy null-polarimetric technique. The behaviour of the effect in ferroelectric phase is referred to quadratic spontaneous electrooptics.

  12. High-accuracy interferometric measurements of flatness and parallelism of a step gauge

    CSIR Research Space (South Africa)

    Kruger, OA

    2001-01-01

    Full Text Available for the calibration of step gauges to a high accuracy. A system was also developed for interferometric measurements of the flatness and parallelism of gauge block faces for use in uncertainty calculations....

  13. High Accuracy Reference Network (HARN), Points generated from coordinates supplied by NGS, Published in 1993, MARIS.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This High Accuracy Reference Network (HARN) dataset, was produced all or in part from Field Survey/GPS information as of 1993. It is described as 'Points generated...

  14. Methodology of High Accuracy and Resolution 3D Geological Model Generation and Application

    Institute of Scientific and Technical Information of China (English)

    吴键; 曹代勇; 邓爱居; 李东津; 蒋涛; 翟光华

    2004-01-01

    By generating a high accuracy and high resolution geological model in Liuchu oil field, the technique of geological modeling is expanded and involved in primary geological study, making the sand bodies and reservoir be easily described in detail. The 3D visualization and 3D interactive editing of geological structure model are the key for modeling procedure. And a high accuracy and resolution geological model has been well applied in optimizing the production scheme.

  15. An angle encoder for super-high resolution and super-high accuracy using SelfA

    Science.gov (United States)

    Watanabe, Tsukasa; Kon, Masahito; Nabeshima, Nobuo; Taniguchi, Kayoko

    2014-06-01

    Angular measurement technology at high resolution for applications such as in hard disk drive manufacturing machines, precision measurement equipment and aspherical process machines requires a rotary encoder with high accuracy, high resolution and high response speed. However, a rotary encoder has angular deviation factors during operation due to scale error or installation error. It has been assumed to be impossible to achieve accuracy below 0.1″ in angular measurement or control after the installation onto the rotating axis. Self-calibration (Lu and Trumper 2007 CIRP Ann. 56 499; Kim et al 2011 Proc. MacroScale; Probst 2008 Meas. Sci. Technol. 19 015101; Probst et al Meas. Sci. Technol. 9 1059; Tadashi and Makoto 1993 J. Robot. Mechatronics 5 448; Ralf et al 2006 Meas. Sci. Technol. 17 2811) and cross-calibration (Probst et al 1998 Meas. Sci. Technol. 9 1059; Just et al 2009 Precis. Eng. 33 530; Burnashev 2013 Quantum Electron. 43 130) technologies for a rotary encoder have been actively discussed on the basis of the principle of circular closure. This discussion prompted the development of rotary tables which achieve reliable and high accuracy angular verification. We apply these technologies for the development of a rotary encoder not only to meet the requirement of super-high accuracy but also to meet that of super-high resolution. This paper presents the development of an encoder with 221 = 2097 152 resolutions per rotation (360°), that is, corresponding to a 0.62″ signal period, achieved by the combination of a laser rotary encoder supplied by Magnescale Co., Ltd and a self-calibratable encoder (SelfA) supplied by The National Institute of Advanced Industrial Science & Technology (AIST). In addition, this paper introduces the development of a rotary encoder to guarantee ±0.03″ accuracy at any point of the interpolated signal, with respect to the encoder at the minimum resolution of 233, that is, corresponding to a 0.0015″ signal period after

  16. Table Manners

    Institute of Scientific and Technical Information of China (English)

    2004-01-01

    Good table manners are more than about proper eating,it’s about being kind and considerate of others.Although table manners are different from country to country,they still share some similarities both in good and bad table manners.

  17. Distributed High Accuracy Peer-to-Peer Localization in Mobile Multipath Environments

    CERN Document Server

    Ekambaram, Venkatesan

    2010-01-01

    In this paper we consider the problem of high accuracy localization of mobile nodes in a multipath-rich environment where sub-meter accuracies are required. We employ a peer to peer framework where the vehicles/nodes can get pairwise multipath-degraded ranging estimates in local neighborhoods together with a fixed number of anchor nodes. The challenge is to overcome the multipath-barrier with redundancy in order to provide the desired accuracies especially under severe multipath conditions when the fraction of received signals corrupted by multipath is dominating. We invoke a message passing analytical framework based on particle filtering and reveal its high accuracy localization promise through simulations.

  18. Very high-accuracy calibration of radiation pattern and gain of a near-field probe

    DEFF Research Database (Denmark)

    Pivnenko, Sergey; Nielsen, Jeppe Majlund; Breinbjerg, Olav

    2014-01-01

    In this paper, very high-accuracy calibration of the radiation pattern and gain of a near-field probe is described. An open-ended waveguide near-field probe has been used in a recent measurement of the C-band Synthetic Aperture Radar (SAR) Antenna Subsystem for the Sentinel 1 mission of the Europ......In this paper, very high-accuracy calibration of the radiation pattern and gain of a near-field probe is described. An open-ended waveguide near-field probe has been used in a recent measurement of the C-band Synthetic Aperture Radar (SAR) Antenna Subsystem for the Sentinel 1 mission...

  19. Development of an automatic calibration device for high-accuracy low temperature thermometers

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Based on the analysis and investigation of calibration systems for high-accuracy low temperature thermometers,a new facility for automatic calibration of high-accuracy low temperature thermometers was developed.Continuous calibration for multiple points can be made automatically with this device.According to the thermophysical characteristics of the constant-temperature block in this device,segmented Fuzzy-PID (proportional-integral-differential) algorithm was applied.The experimental results showed that the temperature fluctuation was smaller than ±0.005 K in 30 min.Therefore,this new device can fully meet the calibration requirement of high-precision low temperature thermometers.

  20. Gated viewing and high-accuracy three-dimensional laser radar

    DEFF Research Database (Denmark)

    Busck, Jens; Heiselberg, Henning

    2004-01-01

    We have developed a fast and high-accuracy three-dimensional (3-D) imaging laser radar that can achieve better than 1 mm range accuracy for half a million pixels in less than 1 s. Our technique is based on range-gating segmentation. We combine the advantages of gated viewing with our new fast...

  1. High-accuracy C-14 measurements for atmospheric CO2 samples by AMS

    NARCIS (Netherlands)

    Meijer, H.A.J.; Pertuisot, M.H.; van der Plicht, J.

    2006-01-01

    In this paper, we investigate how to achieve high-accuracy radiocarbon measurements by accelerator mass spectrometry (ANIS) and present measurement series (performed on archived CO2) of (CO2)-C-14 between 1985 and 1991 for Point Barrow (Alaska) and the South Pole. We report in detail the measurement

  2. Further results on the operation of high-accuracy drift chambers

    NARCIS (Netherlands)

    Breskin, A.; Charpak, G.; Gabioud, B.; Sauli, F.; Trautner, N.

    Optimization of the working parameters in the drift chambers with adjustable electric fields permits stable operation and high accuracies. Full saturation of the drift velocity leads to remarkable improvements, namely a very linear space-time correlation for perpendicular tracks, and simple

  3. Gated viewing and high-accuracy three-dimensional laser radar

    DEFF Research Database (Denmark)

    Busck, Jens; Heiselberg, Henning

    2004-01-01

    We have developed a fast and high-accuracy three-dimensional (3-D) imaging laser radar that can achieve better than 1 mm range accuracy for half a million pixels in less than 1 s. Our technique is based on range-gating segmentation. We combine the advantages of gated viewing with our new fast...

  4. A 1-V 15 μW High-Accuracy Temperature Switch

    NARCIS (Netherlands)

    Schinkel, D.; Boer, de R.P.; Annema, A.J.; Tuijl, van A.J.M.

    2004-01-01

    A CMOS temperature switch with uncalibrated high accuracy is presented. The circuit is based on the classical CMOS bandgap reference structure, using parasitic PNPs and a PTAT multiplier. The circuit was designed in a standard digital 0.18 m CMOS process. The temperature switch has an in-designed hy

  5. High Accuracy Gravitational Waveforms from Black Hole Binary Inspirals Using OpenCL

    CERN Document Server

    McKennon, Justin; Khanna, Gaurav

    2012-01-01

    There is a strong need for high-accuracy and efficient modeling of extreme-mass-ratio binary black hole systems because these are strong sources of gravitational waves that would be detected by future observatories. In this article, we present sample results from our Teukolsky EMRI code: a time-domain Teukolsky equation solver (a linear, hyperbolic, partial differential equation solver using finite-differencing), that takes advantage of several mathematical and computational enhancements to efficiently generate long-duration and high-accuracy EMRI waveforms. We emphasize here the computational advances made in the context of this code. Currently there is considerable interest in making use of many-core processor architectures, such as Nvidia and AMD graphics processing units (GPUs) for scientific computing. Our code uses the Open Computing Language (OpenCL) for taking advantage of the massive parallelism offered by modern GPU architectures. We present the performance of our Teukolsky EMRI code on multiple mod...

  6. [Study on high accuracy detection of multi-component gas in oil-immerse power transformer].

    Science.gov (United States)

    Fan, Jie; Chen, Xiao; Huang, Qi-Feng; Zhou, Yu; Chen, Gang

    2013-12-01

    In order to solve the problem of low accuracy and mutual interference in multi-component gas detection, a kind of multi-component gas detection network with high accuracy was designed. A semiconductor laser with narrow bandwidth was utilized as light source and a novel long-path gas cell was also used in this system. By taking the single sine signal to modulate the spectrum of laser and using space division multiplexing (SDM) and time division multiplexing (TDM) technique, the detection of multi-component gas was achieved. The experiments indicate that the linearity relevance coefficient is 0. 99 and the measurement relative error is less than 4%. The system dynamic response time is less than 15 s, by filling a volume of multi-component gas into the gas cell gradually. The system has advantages of high accuracy and quick response, which can be used in the fault gas on-line monitoring for power transformers in real time.

  7. A study for high accuracy real-time 3D ultrasonic location system.

    Science.gov (United States)

    Zhou, Ping; Ha, Zhang; Zhou, Kangyuan

    2006-12-22

    We discussed a high accuracy real-time 3D ultrasonic location system in this article. The signal received was sampled after it passed the TGC and the logarithmic amplifier. Inside the DSP, we used the dynamic threshold tracing technique to improve the accuracy. The result was processed with Weighted Arithmetic Average. By testing the 40 kHz 3D location system, we have arrived at the accuracy of 1 cm.

  8. Multi-Dimension Indexing of Bilingual Textbooks Based on Auxiliary Tables%基于复分表的双语教材的多维度标引

    Institute of Scientific and Technical Information of China (English)

    安晓丽

    2012-01-01

    双语教材具有专业和语言两个特征,《中国图书馆分类法》(以下简称《中图法》)的主表揭示其专业特征,而复分法和组配法都可以作为揭示其语言特征的辅助手段。通过比较复分法和组配法得出,双语教材更适合利用复分表揭示其语言特征,具体做法为:在《中图法》(第5版)的"总论复分表"中增加新类目"-9语种",并且依据H大类下的各语种类目扩展下位类。%Bilingual textbooks have characteristics of specialty and language,the major table of Chinese Library Classification(CLC) could reveal the specialty characteristic,and the auxiliary method and coordination method could be annotation means of revealing language characteristic.Through the comparing auxiliary method and the coordination method,bilingual textbooks are suitable forusing auxiliary tables to reveal the language characteristic.The specific method indudes following: adding the new category of "-9 language" to general the auxiliary table in CLC(5th edition),and expanding subordinate categories according to language categories under the category of "H".

  9. Environmental Sensitivity Index (ESI) Atlas: Western Alaska - volume 1, geographic information systems data and data tables and volume 2, maps in portable document format (PDF) (NODC Accession 0046030)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set comprises the Environmental Sensitivity Index (ESI) data for Western Alaska. ESI data characterize estuarine environments and wildlife by their...

  10. EJSCREEN National Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The USA table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the national...

  11. EJSCREEN States Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The States table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the state...

  12. EJSCREEN Regions Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regions table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the EPA...

  13. EJSCREEN Regions Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Regions table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the EPA...

  14. EJSCREEN National Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The USA table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the national...

  15. EJSCREEN States Percentiles Lookup Table--2015 Public Release

    Data.gov (United States)

    U.S. Environmental Protection Agency — The States table provides percentile breaks of important EJSCREEN elements (demographic indicators and indexes, environmental indicators and indexes) at the state...

  16. 华北地区栓皮栎天然次生林地位指数表的编制%Establishment of Site Index Table for Quercus variabilis Natural Secondary Forest in North China

    Institute of Scientific and Technical Information of China (English)

    郑聪慧; 贾黎明; 段劼; 魏松坡; 孙操稳; 贾振虎; 卢福顺; 王志勇; 崔向东

    2013-01-01

    In this study, 514 height-age data of 71 sample plots of cork oak natural secondary forest in the northern region and 58 stem analysis sample trees which were average dominate trees were used to establish site index table. The model lgH = - 0. 205 9+0. 770 OlgA was selected as oriented curve from 12 mathematical models. The datum age was 50 years. Exponential distance was 2 m. Six site index curves(7 - 17 m)of Quercus variabilis natural secondary forest were developed by using the method of standard deviation adjustment. Tested by correlation coefficient, fit significance and forecast accuracy, the results showed that the site index table had promising precision, and it could be used on Quercus variabilis natural secondary forest site evaluation.%以华北地区71块栓皮栎天然次生林标准地和58株平均优势木解析木的514对树高-年龄数据作为编表材料,从12个数学模型中选定lgH=-0.205 9+0.770 01gA作为导向曲线,基准年龄为50年,指数级距为2 m,运用标准差调整法导出7~17m6条地位指数曲线,最终得到华北地区栓皮栎天然次生林地位指数表.相关系数检验、拟合显著性检验和预报精度检验表明:所编地位指数表精度较高,可用于华北地区栓皮栎天然次生林立地质量评价.

  17. High-accuracy thickness measurement of a transparent plate with the heterodyne central fringe identification technique

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Wang-Tsung; Hsieh, Hung-Chih; Chang, Wei-Yao; Chen, Yen-Liang; Su, Der-Chin

    2011-07-20

    In a modified Twyman-Green interferometer, the optical path variation is measured with the heterodyne central fringe identification technique, as the light beam is focused by a displaced microscopic objective on the front/rear surface of the test transparent plate. The optical path length variation is then measured similarly after the test plate is removed. The geometrical thickness of the test plate can be calculated under the consideration of dispersion effect. This method has a wide measurable range and a high accuracy in the measurable range.

  18. A small and high accuracy gyro stabilization electro-optical platform

    Science.gov (United States)

    Qiu, Haitao; Han, Yonggen; Lv, Yanhong

    2008-10-01

    A high accuracy line-of-sight (LOS) Stabilization system based on digital control technology was designed. The current feedback closed-loop system was introduced which uses the CCD graphic and resolver to constitute the position closed-loop and uses the optic fiber gyro to constitute the rate closed-loop. In order to realize zero steady-state error of angular output in counteracting disturbance from carrier, a PII2 (proportional-integral-double integral) control scheme is proposed. The hardware configuration and software system is presented. Experimental results show that the system has perfect dynamic and static performance and the technical requirements were satisfied.

  19. High-accuracy mass determination of unstable nuclei with a Penning trap mass spectrometer

    CERN Multimedia

    2002-01-01

    The mass of a nucleus is its most fundamental property. A systematic study of nuclear masses as a function of neutron and proton number allows the observation of collective and single-particle effects in nuclear structure. Accurate mass data are the most basic test of nuclear models and are essential for their improvement. This is especially important for the astrophysical study of nuclear synthesis. In order to achieve the required high accuracy, the mass of ions captured in a Penning trap is determined via their cyclotron frequency $ \

  20. 基于分度台转位装置的惯性测量单元智能检测%Intelligent Detection for IMU Based on Dividing Table Indexing Device

    Institute of Scientific and Technical Information of China (English)

    王斌; 张林; 邓军; 熊耀臣; 吕明

    2015-01-01

    针对惯性测量单元(IMU)批量检测效率低、人工劳动量大的现状,设计开发出一种基于分度台转位装置的IMU智能检测系统。其采用高精度分度台转位装置为IMU提供基准角度位置,利用工控机控制分度台转位装置、程控直流电源和IMU协调有序工作,通过上位机软件智能控制程控直流电源向IMU供电,以及自动发送、采集、分析和处理检测数据,实现对IMU的智能、高效、精确检测。实验结果表明,该系统可同时自动检测4套IMU 的参数指标,并自动计算、显示和保存检测数据,且检测精度、效率和智能化程度高,人工劳动量小,性价比高,此外,软件界面上所有功能均可手动触摸操控,操作十分便捷。%According to the current situation that inertial measuring unit(IMU) is detected with low measurement efficiency and large amount of labour, this article designs and develops an IMU intelligent measurement system based on dividing table indexing device. This system makes use of dividing table indexing device to provide reference angle positions, takes advantage of industrial computer to control dividing table indexing device, programmable DC power and IMU to work orderly and harmoniously. Besides, host-computer software can control the programmable DC power to supply electricity for IMU, and automatically send, collect, analyze and process measurement data to detect IMU intelligently, efficiently and accurately. The experiment result shows that 4 IMUs can be detected automatically at the same time, all detection data can be computed, displayed and saved. Moreover, this system has the features of high detection precision, more efficient, high level of intelligence, small amount of labor, and high performance-cost ratio. In addition, all functions in software interface can be operated through manual touch, which makes it convenient to operate.

  1. Study on High Accuracy Topographic Mapping via UAV-based Images

    Science.gov (United States)

    Chi, Yun-Yao; Lee, Ya-Fen; Tsai, Shang-En

    2016-10-01

    Unmanned aerial vehicle (UAV) provides a promising tool for the acquisition of such multi-temporal aerial stereo photos and high-resolution digital surface models. Recently, the flight of UAVs operates with high degrees of autonomy by the global position system and onboard digit camera and computer. The UAV-based mapping can be obtained faster and cheaper, but its accuracy is anxious. This paper aims to identify the integration ability of high accuracy topographic map via the image of quad-rotors UAV and ground control points (GCPs). The living survey data is collected in the Errn river basins area in Tainan, Taiwan. The high accuracy UAV-based topographic in the study area is calibrated by the local coordinate of GCPs using the total station with the accuracy less than 1/2000. The comparison results show the accuracy of UAV-based topographic is accepted by overlapping. The results can be a reference for the practice works of mapping survey in earth.

  2. High-accuracy optimal finite-thrust trajectories for Moon escape

    Science.gov (United States)

    Shen, Hong-Xin; Casalino, Lorenzo

    2017-02-01

    The optimization problem of fuel-optimal trajectories from a low circular Moon orbit to a target hyperbolic excess velocity vector using finite-thrust propulsion is solved. The ability to obtain the most accurate satisfaction of necessary optimality conditions in a high-accuracy dynamic model is the main motivation of the current study. The solutions allow attaining anytime-return Earth-interface conditions from a low lunar orbit. Gravitational effects of the Sun, Earth, and Moon are included throughout the entire trajectory. Severe constraints on the fuel budget combined with high-accuracy demands on the endpoint conditions necessitate a high-fidelity solution to the trajectory optimization problem and JPL DE405 ephemeris model is used to determine the perturbing bodies' positions. The optimization problem is solved using an indirect method. The optimality of the solution is verified by an application of Pontryagin's maximum principle. More accurate and fuel-efficient trajectories are found for the same mission objectives and constraints published in other research, emphasizing the advantages of this technique. It is also shown that the thrust structure consists of three finite burns. In contrast to previous research, no singular arc is required in the optimal solutions, and all the controls appear bang-bang.

  3. A High-Throughput, High-Accuracy System-Level Simulation Framework for System on Chips

    Directory of Open Access Journals (Sweden)

    Guanyi Sun

    2011-01-01

    Full Text Available Today's System-on-Chips (SoCs design is extremely challenging because it involves complicated design tradeoffs and heterogeneous design expertise. To explore the large solution space, system architects have to rely on system-level simulators to identify an optimized SoC architecture. In this paper, we propose a system-level simulation framework, System Performance Simulation Implementation Mechanism, or SPSIM. Based on SystemC TLM2.0, the framework consists of an executable SoC model, a simulation tool chain, and a modeling methodology. Compared with the large body of existing research in this area, this work is aimed at delivering a high simulation throughput and, at the same time, guaranteeing a high accuracy on real industrial applications. Integrating the leading TLM techniques, our simulator can attain a simulation speed that is not slower than that of the hardware execution by a factor of 35 on a set of real-world applications. SPSIM incorporates effective timing models, which can achieve a high accuracy after hardware-based calibration. Experimental results on a set of mobile applications proved that the difference between the simulated and measured results of timing performance is within 10%, which in the past can only be attained by cycle-accurate models.

  4. Optical System Error Analysis and Calibration Method of High-Accuracy Star Trackers

    Directory of Open Access Journals (Sweden)

    Zheng You

    2013-04-01

    Full Text Available The star tracker is a high-accuracy attitude measurement device widely used in spacecraft. Its performance depends largely on the precision of the optical system parameters. Therefore, the analysis of the optical system parameter errors and a precise calibration model are crucial to the accuracy of the star tracker. Research in this field is relatively lacking a systematic and universal analysis up to now. This paper proposes in detail an approach for the synthetic error analysis of the star tracker, without the complicated theoretical derivation. This approach can determine the error propagation relationship of the star tracker, and can build intuitively and systematically an error model. The analysis results can be used as a foundation and a guide for the optical design, calibration, and compensation of the star tracker. A calibration experiment is designed and conducted. Excellent calibration results are achieved based on the calibration model. To summarize, the error analysis approach and the calibration method are proved to be adequate and precise, and could provide an important guarantee for the design, manufacture, and measurement of high-accuracy star trackers.

  5. ADFE METHOD WITH HIGH ACCURACY FOR NONLINEAR PARABOLIC INTEGRO-DIFFERENTIAL SYSTEM WITH NONLINEAR BOUNDARY CONDITIONS

    Institute of Scientific and Technical Information of China (English)

    崔霞

    2002-01-01

    Alternating direction finite element (ADFE) scheme for d-dimensional nonlinear system of parabolic integro-differential equations is studied. By using a local approximation based on patches of finite elements to treat the capacity term qi(u), decomposition of the coefficient matrix is realized; by using alternating direction, the multi-dimensional problem is reduced to a family of single space variable problems, calculation work is simplified; by using finite element method, high accuracy for space variant is kept; by using inductive hypothesis reasoning, the difficulty coming from the nonlinearity of the coefficients and boundary conditions is treated; by introducing Ritz-Volterra projection, the difficulty coming from the memory term is solved. Finally, by using various techniques for priori estimate for differential equations, the unique resolvability and convergence properties for both FE and ADFE schemes are rigorously demonstrated, and optimal H1 and L2norm space estimates and O((△t)2) estimate for time variant are obtained.

  6. SLSTR: a high accuracy dual scan temperature radiometer for sea and land surface monitoring from space

    Science.gov (United States)

    Coppo, P.; Ricciarelli, B.; Brandani, F.; Delderfield, J.; Ferlet, M.; Mutlow, C.; Munro, G.; Nightingale, T.; Smith, D.; Bianchi, S.; Nicol, P.; Kirschstein, S.; Hennig, T.; Engel, W.; Frerick, J.; Nieke, J.

    2010-10-01

    SLSTR is a high accuracy infrared radiometer which will be embarked in the Earth low-orbit Sentinel 3 operational GMES mission. SLSTR is an improved version of the previous AATSR and ATSR-1/2 instruments which have flown respectively on Envisat and ERS-1/2 ESA missions. SLSTR will provide data continuity with respect to these previous missions but with a substantial improvement due to its higher swaths (750 km in dual view and 1400 km in single view) which should permit global coverage of SST and LST measurements (at 1 km of spatial resolution in IR channels) with daily revisit time, useful for climatological and meteorological applications. Two more SWIR channels and a higher spatial resolution in the VIS/SWIR channels (0.5 km) are also implemented for a better clouds/aerosols screening. Two further additional channels for global scale fire monitoring are present at the same time as the other nominal channels.

  7. High Accuracy Attitude Control System Design for Satellite with Flexible Appendages

    Directory of Open Access Journals (Sweden)

    Wenya Zhou

    2014-01-01

    Full Text Available In order to realize the high accuracy attitude control of satellite with flexible appendages, attitude control system consisting of the controller and structural filter was designed. When the low order vibration frequency of flexible appendages is approximating the bandwidth of attitude control system, the vibration signal will enter the control system through measurement device to bring impact on the accuracy or even the stability. In order to reduce the impact of vibration of appendages on the attitude control system, the structural filter is designed in terms of rejecting the vibration of flexible appendages. Considering the potential problem of in-orbit frequency variation of the flexible appendages, the design method for the adaptive notch filter is proposed based on the in-orbit identification technology. Finally, the simulation results are given to demonstrate the feasibility and effectiveness of the proposed design techniques.

  8. High-accuracy determination of the neutron flux at n{sub T}OF

    Energy Technology Data Exchange (ETDEWEB)

    Barbagallo, M.; Colonna, N.; Mastromarco, M.; Meaze, M.; Tagliente, G.; Variale, V. [Sezione di Bari, INFN, Bari (Italy); Guerrero, C.; Andriamonje, S.; Boccone, V.; Brugger, M.; Calviani, M.; Cerutti, F.; Chin, M.; Ferrari, A.; Kadi, Y.; Losito, R.; Versaci, R.; Vlachoudis, V. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Tsinganis, A. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); National Technical University of Athens (NTUA), Athens (Greece); Tarrio, D.; Duran, I.; Leal-Cidoncha, E.; Paradela, C. [Universidade de Santiago de Compostela, Santiago (Spain); Altstadt, S.; Goebel, K.; Langer, C.; Reifarth, R.; Schmidt, S.; Weigand, M. [Johann-Wolfgang-Goethe Universitaet, Frankfurt (Germany); Andrzejewski, J.; Marganiec, J.; Perkowski, J. [Uniwersytet Lodzki, Lodz (Poland); Audouin, L.; Leong, L.S.; Tassan-Got, L. [Centre National de la Recherche Scientifique/IN2P3 - IPN, Orsay (France); Becares, V.; Cano-Ott, D.; Garcia, A.R.; Gonzalez-Romero, E.; Martinez, T.; Mendoza, E. [Centro de Investigaciones Energeticas Medioambientales y Tecnologicas (CIEMAT), Madrid (Spain); Becvar, F.; Krticka, M.; Kroll, J.; Valenta, S. [Charles University, Prague (Czech Republic); Belloni, F.; Fraval, K.; Gunsing, F.; Lampoudis, C.; Papaevangelou, T. [Commissariata l' Energie Atomique (CEA) Saclay - Irfu, Gif-sur-Yvette (France); Berthoumieux, E.; Chiaveri, E. [European Organization for Nuclear Research (CERN), Geneva (Switzerland); Commissariata l' Energie Atomique (CEA) Saclay - Irfu, Gif-sur-Yvette (France); Billowes, J.; Ware, T.; Wright, T. [University of Manchester, Manchester (United Kingdom); Bosnar, D.; Zugec, P. [University of Zagreb, Department of Physics, Faculty of Science, Zagreb (Croatia); Calvino, F.; Cortes, G.; Gomez-Hornillos, M.B.; Riego, A. [Universitat Politecnica de Catalunya, Barcelona (Spain); Carrapico, C.; Goncalves, I.F.; Sarmento, R.; Vaz, P. [Universidade Tecnica de Lisboa, Instituto Tecnologico e Nuclear, Instituto Superior Tecnico, Lisboa (Portugal); Cortes-Giraldo, M.A.; Praena, J.; Quesada, J.M.; Sabate-Gilarte, M. [Universidad de Sevilla, Sevilla (Spain); Diakaki, M.; Karadimos, D.; Kokkoris, M.; Vlastou, R. [National Technical University of Athens (NTUA), Athens (Greece); Domingo-Pardo, C.; Giubrone, G.; Tain, J.L. [CSIC-Universidad de Valencia, Instituto de Fisica Corpuscular, Valencia (Spain); Dressler, R.; Kivel, N.; Schumann, D.; Steinegger, P. [Paul Scherrer Institut, Villigen PSI (Switzerland); Dzysiuk, N.; Mastinu, P.F. [Laboratori Nazionali di Legnaro, INFN, Rome (Italy); Eleftheriadis, C.; Manousos, A. [Aristotle University of Thessaloniki, Thessaloniki (Greece); Ganesan, S.; Gurusamy, P.; Saxena, A. [Bhabha Atomic Research Centre (BARC), Mumbai (IN); Griesmayer, E.; Jericha, E.; Leeb, H. [Technische Universitaet Wien, Atominstitut, Wien (AT); Hernandez-Prieto, A. [European Organization for Nuclear Research (CERN), Geneva (CH); Universitat Politecnica de Catalunya, Barcelona (ES); Jenkins, D.G.; Vermeulen, M.J. [University of York, Heslington, York (GB); Kaeppeler, F. [Institut fuer Kernphysik, Karlsruhe Institute of Technology, Campus Nord, Karlsruhe (DE); Koehler, P. [Oak Ridge National Laboratory (ORNL), Oak Ridge (US); Lederer, C. [Johann-Wolfgang-Goethe Universitaet, Frankfurt (DE); University of Vienna, Faculty of Physics, Vienna (AT); Massimi, C.; Mingrone, F.; Vannini, G. [Universita di Bologna (IT); INFN, Sezione di Bologna, Dipartimento di Fisica, Bologna (IT); Mengoni, A.; Ventura, A. [Agenzia nazionale per le nuove tecnologie, l' energia e lo sviluppo economico sostenibile (ENEA), Bologna (IT); Milazzo, P.M. [Sezione di Trieste, INFN, Trieste (IT); Mirea, M. [Horia Hulubei National Institute of Physics and Nuclear Engineering - IFIN HH, Bucharest - Magurele (RO); Mondalaers, W.; Plompen, A.; Schillebeeckx, P. [Institute for Reference Materials and Measurements, European Commission JRC, Geel (BE); Pavlik, A.; Wallner, A. [University of Vienna, Faculty of Physics, Vienna (AT); Rauscher, T. [University of Basel, Department of Physics and Astronomy, Basel (CH); Roman, F. [European Organization for Nuclear Research (CERN), Geneva (CH); Horia Hulubei National Institute of Physics and Nuclear Engineering - IFIN HH, Bucharest - Magurele (RO); Rubbia, C. [European Organization for Nuclear Research (CERN), Geneva (CH); Laboratori Nazionali del Gran Sasso dell' INFN, Assergi (AQ) (IT); Weiss, C. [European Organization for Nuclear Research (CERN), Geneva (CH); Johann-Wolfgang-Goethe Universitaet, Frankfurt (DE)

    2013-12-15

    The neutron flux of the n{sub T}OF facility at CERN was measured, after installation of the new spallation target, with four different systems based on three neutron-converting reactions, which represent accepted cross sections standards in different energy regions. A careful comparison and combination of the different measurements allowed us to reach an unprecedented accuracy on the energy dependence of the neutron flux in the very wide range (thermal to 1 GeV) that characterizes the n{sub T}OF neutron beam. This is a pre-requisite for the high accuracy of cross section measurements at n{sub T}OF. An unexpected anomaly in the neutron-induced fission cross section of {sup 235}U is observed in the energy region between 10 and 30keV, hinting at a possible overestimation of this important cross section, well above currently assigned uncertainties. (orig.)

  9. Study on Calibration System for Electronic Transformers Based on High-Accuracy PCI Card

    Directory of Open Access Journals (Sweden)

    Mingzhu Zhang

    2013-03-01

    Full Text Available With preliminary applying of Electronic Transformer (ET based on IEC 61850 standards in power grid, the calibrations of tested transformers have attracted extensive research attention. This study proposes a novel Calibration System of ET (CSET based on high-accuracy card. Data acquisition of ET and Standard Trans-former (ST is gotten by optic Ethernet and PCI-4462 data acquisition card, respectively. Meanwhile, the synchronized sampling between ET and ST is completed on the optic/electronic pulse signal of PCI synchronization card. The signals processing and human interface are realized by Labview software. The system proposed in the study is feasible for calibrating Electronic Voltage/Current Transformers (EVT/ECT of different voltage classes. System tests show that the precision of the system can get to 0.2°.

  10. Study on Calibration System for Electronic Transformers Based on High-Accuracy PCI Card

    Directory of Open Access Journals (Sweden)

    Mingzhu Zhang

    2013-05-01

    Full Text Available With preliminary applying of Electronic Transformer (ET based on IEC 61850 standards in power grid, the calibration of tested transformers has attracted extensive research attention. This study proposes a novel Calibration System of ET (CSET based on high-accuracy card. Data acquisition of ET and standard trans-former (ST is gotten by optic Ethernet and PCI-4462 data acquisition card, respectively. Meanwhile, the synchronized sampling between ET and ST is completed on the optic/electronic pulse signal of PCI synchronization card. The signals processing and human interface are realized by Lab view software. The system proposed in the study is feasible for calibrating Electronic Voltage/Current Transformers (EVT/ECT of different voltage classes. System tests show that the precision of the system can get to 0.2°.

  11. Navigation Facility for High Accuracy Offline Trajectory and Attitude Estimation in Airborne Applications

    Directory of Open Access Journals (Sweden)

    A. Renga

    2013-01-01

    Full Text Available The paper focuses on a navigation facility, relying on commercial-off-the-shelf (COTS technology, developed to generate high-accuracy attitude and trajectory measurements in postprocessing. Target performance is cm-level positioning with tenth of degree attitude accuracy. The facility is based on the concept of GPS-aided inertial navigation but comprises carrier-phase differential GPS (CDGPS processing and attitude estimation based on multiantenna GPS configurations. Expected applications of the system include: (a performance assessment of integrated navigation systems, developed for general aviation aircraft and medium size unmanned aircraft systems (UAS; (b generation of reference measurements to evaluate the flight performance of airborne sensors (e.g., radar or laser; and (c generation of reference trajectory and attitude for improving imaging quality of airborne remote sensing data. The paper describes system architecture, selected algorithms for data processing and integration, and theoretical performance evaluation. Experimental results are also presented confirming the effectiveness of the implemented approach.

  12. High-Accuracy Programmable Timing Generator with Wide-Range Tuning Capability

    Directory of Open Access Journals (Sweden)

    Ting-Li Chu

    2013-01-01

    Full Text Available In this paper, a high-accuracy programmable timing generator with wide-range tuning capability is proposed. With the aid of dual delay-locked loop (DLL, both of the coarse- and fine-tuning mechanisms are operated in precise closed-loop scheme to lessen the effects of the ambient variations. The timing generator can provide sub-gate resolution and instantaneous switching capability. The circuit is implemented and simulated in TSMC 0.18 μm 1P6M technology. The test chip area occupies 1.9 mm2. The reference clock cycle can be divided into 128 bins by interpolation to obtain 14 ps resolution with the clock rate at 550 MHz. The INL and DNL are within −0.21~+0.78 and −0.27~+0.43 LSB, respectively.

  13. High Accuracy mass Measurement of the very Short-Lived Halo Nuclide $^{11}$Li

    CERN Multimedia

    Le scornet, G

    2002-01-01

    The archetypal halo nuclide $^{11}$Li has now attracted a wealth of experimental and theoretical attention. The most outstanding property of this nuclide, its extended radius that makes it as big as $^{48}$Ca, is highly dependent on the binding energy of the two neutrons forming the halo. New generation experiments using radioactive beams with elastic proton scattering, knock-out and transfer reactions, together with $\\textit{ab initio}$ calculations require the tightening of the constraint on the binding energy. Good metrology also requires confirmation of the sole existing precision result to guard against a possible systematic deviation (or mistake). We propose a high accuracy mass determintation of $^{11}$Li, a particularly challenging task due to its very short half-life of 8.6 ms, but one perfectly suiting the MISTRAL spectrometer, now commissioned at ISOLDE. We request 15 shifts of beam time.

  14. High accuracy digital aging monitor based on PLL-VCO circuit

    Science.gov (United States)

    Yuejun, Zhang; Zhidi, Jiang; Pengjun, Wang; Xuelong, Zhang

    2015-01-01

    As the manufacturing process is scaled down to the nanoscale, the aging phenomenon significantly affects the reliability and lifetime of integrated circuits. Consequently, the precise measurement of digital CMOS aging is a key aspect of nanoscale aging tolerant circuit design. This paper proposes a high accuracy digital aging monitor using phase-locked loop and voltage-controlled oscillator (PLL-VCO) circuit. The proposed monitor eliminates the circuit self-aging effect for the characteristic of PLL, whose frequency has no relationship with circuit aging phenomenon. The PLL-VCO monitor is implemented in TSMC low power 65 nm CMOS technology, and its area occupies 303.28 × 298.94 μm2. After accelerating aging tests, the experimental results show that PLL-VCO monitor improves accuracy about high temperature by 2.4% and high voltage by 18.7%.

  15. High-accuracy measurement of the magnetic moment anomaly of the electron bound in hydrogenlike carbon.

    Science.gov (United States)

    Häffner, H; Beier, T; Hermanspahn, N; Kluge, H J; Quint, W; Stahl, S; Verdú, J; Werth, G

    2000-12-18

    We present a new experimental value for the magnetic moment of the electron bound in hydrogenlike carbon (12C5+): g(exp) = 2.001 041 596 (5). This is the most precise determination of an atomic g(J) factor so far. The experiment was carried out on a single 12C5+ ion stored in a Penning trap. The high accuracy was made possible by spatially separating the induction of spin flips and the analysis of the spin direction. The current theoretical value amounts to g(th) = 2.001 041 591 (7). Together experiment and theory test the bound-state QED contributions to the g(J) factor of a bound electron to a precision of 1%.

  16. Data supporting the high-accuracy haplotype imputation using unphased genotype data as the references

    Directory of Open Access Journals (Sweden)

    Wenzhi Li

    2016-09-01

    Full Text Available The data presented in this article is related to the research article entitled “High-accuracy haplotype imputation using unphased genotype data as the references” which reports the unphased genotype data can be used as reference for haplotyping imputation [1]. This article reports different implementation generation pipeline, the results of performance comparison between different implementations (A, B, and C and between HiFi and three major imputation software tools. Our data showed that the performances of these three implementations are similar on accuracy, in which the accuracy of implementation-B is slightly but consistently higher than A and C. HiFi performed better on haplotype imputation accuracy and three other software performed slightly better on genotype imputation accuracy. These data may provide a strategy for choosing optimal phasing pipeline and software for different studies.

  17. High Accuracy Liquid Propellant Slosh Predictions Using an Integrated CFD and Controls Analysis Interface

    Science.gov (United States)

    Marsell, Brandon; Griffin, David; Schallhorn, Dr. Paul; Roth, Jacob

    2012-01-01

    Coupling computational fluid dynamics (CFD) with a controls analysis tool elegantly allows for high accuracy predictions of the interaction between sloshing liquid propellants and th e control system of a launch vehicle. Instead of relying on mechanical analogs which are not valid during aU stages of flight, this method allows for a direct link between the vehicle dynamic environments calculated by the solver in the controls analysis tool to the fluid flow equations solved by the CFD code. This paper describes such a coupling methodology, presents the results of a series of test cases, and compares said results against equivalent results from extensively validated tools. The coupling methodology, described herein, has proven to be highly accurate in a variety of different cases.

  18. Integrated CFD and Controls Analysis Interface for High Accuracy Liquid Propellant Slosh Predictions

    Science.gov (United States)

    Marsell, Brandon; Griffin, David; Schallhorn, Paul; Roth, Jacob

    2012-01-01

    Coupling computational fluid dynamics (CFD) with a controls analysis tool elegantly allows for high accuracy predictions of the interaction between sloshing liquid propellants and the control system of a launch vehicle. Instead of relying on mechanical analogs which are n0t va lid during all stages of flight, this method allows for a direct link between the vehicle dynamic environments calculated by the solver in the controls analysis tool to the fluid now equations solved by the CFD code. This paper describes such a coupling methodology, presents the results of a series of test cases, and compares said results against equivalent results from extensively validated tools. The coupling methodology, described herein, has proven to be highly accurate in a variety of different cases.

  19. Computer-aided diagnosis of breast MRI with high accuracy optical flow estimation

    Science.gov (United States)

    Meyer-Baese, Anke; Barbu, Adrian; Lobbes, Marc; Hoffmann, Sebastian; Burgeth, Bernhard; Kleefeld, Andreas; Meyer-Bäse, Uwe

    2015-05-01

    Non-mass enhancing lesions represent a challenge for the radiological reading. They are not well-defined in both morphology (geometric shape) and kinetics (temporal enhancement) and pose a problem to lesion detection and classification. To enhance the discriminative properties of an automated radiological workflow, the correct preprocessing steps need to be taken. In an usual computer-aided diagnosis (CAD) system, motion compensation plays an important role. To this end, we employ a new high accuracy optical flow based motion compensation algorithm with robustification variants. An automated computer-aided diagnosis system evaluates the atypical behavior of these lesions, and additionally considers the impact of non-rigid motion compensation on a correct diagnosis.

  20. Using Mobile Laser Scanning Data for Features Extraction of High Accuracy Driving Maps

    Science.gov (United States)

    Yang, Bisheng; Liu, Yuan; Liang, Fuxun; Dong, Zhen

    2016-06-01

    High Accuracy Driving Maps (HADMs) are the core component of Intelligent Drive Assistant Systems (IDAS), which can effectively reduce the traffic accidents due to human error and provide more comfortable driving experiences. Vehicle-based mobile laser scanning (MLS) systems provide an efficient solution to rapidly capture three-dimensional (3D) point clouds of road environments with high flexibility and precision. This paper proposes a novel method to extract road features (e.g., road surfaces, road boundaries, road markings, buildings, guardrails, street lamps, traffic signs, roadside-trees, power lines, vehicles and so on) for HADMs in highway environment. Quantitative evaluations show that the proposed algorithm attains an average precision and recall in terms of 90.6% and 91.2% in extracting road features. Results demonstrate the efficiencies and feasibilities of the proposed method for extraction of road features for HADMs.

  1. High Accuracy Speed-fed Grating Angular Acceleration Measurement System Based on FPGA

    Directory of Open Access Journals (Sweden)

    Hao Zhao

    2012-09-01

    Full Text Available Shaft angular acceleration is one of the most important parameter of rotary machines, the error of angular acceleration increased when the shaft speed up. For this problem, a new high accuracy angular acceleration measurement system is presented, the principle of measurement is self-regulating the period of speed sampling signal according to the proportion of the shaft speed up. This measurement system combined FPGA and SCM, the speed of shaft is received by the timer of SCM responding the interrupts of FPGA, and then set the parameter of frequency divider in FPGA, so as to make the period of speed sampling consistent with the proportion of the speed up. This measurement system could overcome the error when system speed up according to the experiment.

  2. Discovery and validation of urine markers of acute pediatric appendicitis using high accuracy mass spectrometry

    Science.gov (United States)

    Kentsis, Alex; Lin, Yin Yin; Kurek, Kyle; Calicchio, Monica; Wang, Yan Yan; Monigatti, Flavio; Campagne, Fabien; Lee, Richard; Horwitz, Bruce; Steen, Hanno; Bachur, Richard

    2015-01-01

    Study Objective Molecular definition of disease has been changing all aspects of medical practice, from diagnosis and screening to understanding and treatment. Acute appendicitis is among many human conditions that are complicated by the heterogeneity of clinical presentation and shortage of diagnostic markers. Here, we sought to profile the urine of patients with appendicitis with the goal of identifying new diagnostic markers. Methods Candidate markers were identified from the urine of children with histologically proven appendicitis by using high accuracy mass spectrometry proteome profiling. These systemic and local markers were used to assess the probability of appendicitis in a blinded, prospective study of children being evaluated for acute abdominal pain in our emergency department. Tests of performance of the markers were evaluated against the pathologic diagnosis and histologic grade of appendicitis. Results Test performance of 57 identified candidate markers was studied in 67 patients, with median age of 11 years, 37% of whom had appendicitis. Several exhibited favorable diagnostic performance, including calgranulin A (S100-A8), α-1-acid glycoprotein 1 (orosomucoid), and leucine-rich α-2-glycoprotein (LRG), with the ROC AUC and values of 0.84 (95 % CI 0.72-0.95), 0.84 (0.72-0.95), and 0.97 (0.93-1.0), respectively. LRG was enriched in diseased appendices and its abundance correlated with severity of appendicitis. Conclusions High accuracy mass spectrometry urine proteome profiling allowed identification of diagnostic markers of acute appendicitis. Usage of LRG and other identified biomarkers may improve the diagnostic accuracy of clinical evaluations of appendicitis. PMID:19556024

  3. High-accuracy infra-red thermography method using reflective marker arrays

    Science.gov (United States)

    Kirollos, Benjamin; Povey, Thomas

    2017-09-01

    In this paper, we describe a new method for high-accuracy infra-red (IR) thermography measurements in situations with significant spatial variation in reflected radiation from the surroundings, or significant spatial variation in surface emissivity due to viewing angle non-uniformity across the field of view. The method employs a reflective marker array (RMA) on the target surface—typically, high emissivity circular dots—and an integrated image analysis algorithm designed to require minimal human input. The new technique has two particular advantages which make it suited to high-accuracy measurements in demanding environments: (i) it allows the reflected radiation component to be calculated directly, in situ, and as a function of position, overcoming a key problem in measurement environments with non-uniform and unsteady stray radiation from the surroundings; (ii) using image analysis of the marker array (via apparent aspect ratio of the circular reflective markers), the local viewing angle of the target surface can be estimated, allowing corrections for angular variation of local emissivity to be performed without prior knowledge of the geometry. A third advantage of the technique is that allows for simple focus-stacking algorithms due to increased image entropy. The reflective marker array method is demonstrated for an isothermal, hemispherical object exposed to an external IR source arranged to give a significant non-uniform reflected radiation term. This is an example of a challenging environment, both because of the significant non-uniform reflected radiation term, and also the significant variation in target emissivity due to surface angle variation. We demonstrate that the new RMA IR technique leads to significantly lower error in evaluated surface temperature than conventional IR techniques. The method is applicable to any complex radiative environment.

  4. High Accuracy Reference Network (HARN), Published in 2000, 1:600 (1in=50ft) scale, Brown County, WI.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This High Accuracy Reference Network (HARN) dataset, published at 1:600 (1in=50ft) scale, was produced all or in part from Field Survey/GPS information as of 2000....

  5. Guide to mathematical tables supplement no 1

    CERN Document Server

    Burunova, N M; Fedorova, R M

    1960-01-01

    A Guide to Mathematical Tables is a supplement to the Guide to Mathematical Tables published by the U.S.S.R. Academy of Sciences in 1956. The tables contain information on subjects such as powers, rational and algebraic functions, and trigonometric functions, as well as logarithms and polynomials and Legendre functions. An index listing all functions included in both the Guide and the Supplement is included.Comprised of 15 chapters, this supplement first describes mathematical tables in the following order: the accuracy of the table (that is, the number of decimal places or significant

  6. High-accuracy alignment based on atmospherical dispersion - technological approaches and solutions for the dual-wavelength transmitter

    Energy Technology Data Exchange (ETDEWEB)

    Burkhard, Boeckem [Institute for Geodesy and Photogrammetry, ETH Zurich (Switzerland)

    1999-07-01

    In the course of the progressive developments of sophisticated geodetic systems utilizing electromagnetic waves in the visible or near IR-range a more detailed knowledge of the propagation medium and coevally solutions of atmospherically induced limitations will become important. An alignment system based on atmospherical dispersion, called a dispersometer, is a metrological solution to the atmospherically induced limitations, in optical alignment and direction observations of high accuracy. In the dispersometer we are using the dual-wavelength method for dispersive air to obtain refraction compensated angle measurements, the detrimental impact of atmospheric turbulence notwithstanding. The principle of the dual-wavelength method utilizes atmospherical dispersion, i.e. the wavelength dependence of the refractive index. The difference angle between two light beams of different wavelengths, which is called the dispersion angle {delta}{beta}, is to first approximation proportional to the refraction angle: {beta}{sub IR} {nu}({beta}{sub blue} - {beta}{sub IR}) = {nu} {delta}{beta}, this equation implies that the dispersion angle has to be measured at least 42 times more accurate than the desired accuracy of the refraction angle for the wavelengths used in the present dispersometer. This required accuracy constitutes one major difficulty for the instrumental performance in applying the dispersion effect. However, the dual-wavelength method can only be successfully used in an optimized transmitter-receiver combination. Beyond the above mentioned resolution requirement for the detector, major difficulties in instrumental realization arise in the availability of a suitable dual-wavelength laser light source, laser light modulation with a very high extinction ratio and coaxial emittance of mono-mode radiation at both wavelengths. Therefore, this paper focuses on the solutions of the dual-wavelength transmitter introducing a new hardware approach and a complete re-design of

  7. Characterization of an experimental arrangement to measure position of particles in 3D with a high accuracy

    Science.gov (United States)

    Martínez González, A.; Guerrero Viramontes, J. A.; Moreno Hernández, D.

    2011-09-01

    Single particle position calculation in three dimensions (3D) with high accuracy is the very important in several branches of science. On the other hand, the use of in-line holography to study very small objects in a dynamic volume is a technique of importance for scientists and engineers across a variety of disciplines for obtaining information about size, shape, trajectory and velocity of small objects such as dust particles. However, in general for in-line holography, accurate determination of the object's position in the optical axis direction is difficult. In order to overcome this shortcoming, we proposed to use in-line holography set up to record particle images in two orthogonal forward configurations. In this study, we avoid digital holography reconstruction to calculate particle position. To determine particle position, the proposed method is based on the calculation of the size and position of the central spot size (CSS) of a particle diffraction image. The size of the CSS is calculated by using the Continuous Wavelet Transform (CWT) and Continuous Hough Transforms (CHT), an then the size of the CSS is related to a calibration curve calculated experimentally in order to determine the "z" particle position and centroid of the CSS render the "x-y" position of a particle image. The procedure proposed in this work to determine the 3D particle position is so simple since it avoids a complicated experimental set-up and several computational steps in order to obtain the 3D position of the particles. Our approach offers the following advantages: First, the mathematical accuracy, light illumination as well as particle and medium refractive indexes are used during the analysis. Second, it is not required to resolve the size of particle since we calculate only the size of CSS of a diffraction particle image pattern.

  8. High-accuracy current sensing circuit with current compensation technique for buck-boost converter

    Science.gov (United States)

    Rao, Yuan; Deng, Wan-Ling; Huang, Jun-Kai

    2015-03-01

    A novel on-chip current sensing circuit with current compensation technique suitable for buck-boost converter is presented in this article. The proposed technique can sense the full-range inductor current with high accuracy and high speed. It is mainly based on matched current mirror and does not require a large proportion of aspect ratio between the powerFET and the senseFET, thus it reduces the complexity of circuit design and the layout mismatch issue without decreasing the power efficiency. The circuit is fabricated with TSMC 0.25 µm 2P5M mixed-signal process. Simulation results show that the buck-boost converter can be operated at 200 kHz to 4 MHz switching frequency with an input voltage from 2.8 to 4.7 V. The output voltage is 3.6 V, and the maximum accuracy for both high and low side sensing current reaches 99% within the load current ranging from 200 to 600 mA.

  9. A high-accuracy surgical augmented reality system using enhanced integral videography image overlay.

    Science.gov (United States)

    Zhang, Xinran; Chen, Guowen; Liao, Hongen

    2015-01-01

    Image guided surgery has been used in clinic to improve the surgery safety and accuracy. Augmented reality (AR) technique, which can provide intuitive image guidance, has been greatly evolved these years. As one promising approach of surgical AR systems, integral videography (IV) autostereoscopic image overlay has achieved accurate fusion of full parallax guidance into surgical scene. This paper describes an image enhanced high-accuracy IV overlay system. A flexible optical image enhancement system (IES) is designed to increase the resolution and quality of IV image. Furthermore, we introduce a novel IV rendering algorithm to promote the spatial accuracy with the consideration of distortion introduced by micro lens array. Preliminary experiments validated that the image accuracy and resolution are improved with the proposed methods. The resolution of the IV image could be promoted to 1 mm for a micro lens array with pitch of 2.32 mm and IES magnification value of 0.5. The relative deviation of accuracy in depth and lateral directions are -4.68 ± 0.83% and -9.01 ± 0.42%.

  10. Simple high-accuracy resolution program for convective modelling of discontinuities

    Science.gov (United States)

    Leonard, B. P.

    1988-01-01

    For steady multidimensional convection, the Quadratic Upstream Interpolation for Convective Kinematics (QUICK) scheme has several attractive properties. However, for highly convective simulation of step profiles, QUICK produces unphysical overshoots and a few oscillations, and this may cause serious problems in nonlinear flows. Fortunately, it is possible to modify the convective flux by writing the normalized convected control-volume face value as a function of the normalized adjacent upstream node value, developing criteria for monotonic resolution without sacrificing formal accuracy. This results in a nonlinear functional relationship between the normalized variables, whereas standard methods are all linear in this sense. The resulting Simple High Accuracy Resolution Program (SHARP) can be applied to steady multidimensional flows containing thin shear or mixing layers, shock waves, and other frontal phenomena. This represents a significant advance in modeling highly convective flows of engineering and geophysical importance. SHARP is based on an explicit, conservative, control-volume flux formation, equally applicable to one, two, or three dimensional elliptic, parabolic, hyperbolic, or mixed-flow regimes. Results are given for the bench-mark purely convective first-order results and the nonmonotonic predictions of second- and third-order upwinding.

  11. Hybrid head-tracker being examined for the high-accuracy attack rotorcraft market

    Science.gov (United States)

    Blanton, Buddy

    2002-08-01

    The need for the helmet-mounted display (HMD) to present flight, navigation, and weapon information in the pilot's line-of-sight has continued to rise as helicopter missions increase in complexity. To obtain spatial correlation of the direction of the head line-of-sight and pilotage imagery generated from helicopter-mounted sensors, it is necessary to slave the sensors to the head motion. To accomplish this task, a head-tracking system (HTS) must be incorporated into the HMD. There are a variety of techniques that could be applied for locating the position and attitude of a helmet-mounted display. Regardless of the technology, an HTS must provide defined measurements of accuracy. System parameters include motion box size, angular range, pointing angle accuracy, pointing angle resolution, update rate, and slew rate. This paper focuses on a hybrid tracker implementation in which a combination of optical and inertial tracking using strap-down gyros is preferred. Specifically, this tracker implementation is being examined for the high-accuracy attack rotorcraft market which requires a high degree of accuracy. The performance and resultant cost of the tracker components are determined by the specific needs of the intended application. The paper will also indicate how the various requirements drive the cost, configuration, and performance of the resultant hybrid head-tracker.

  12. A high accuracy broadband measurement system for time resolved complex bioimpedance measurements.

    Science.gov (United States)

    Kaufmann, S; Malhotra, A; Ardelt, G; Ryschka, M

    2014-06-01

    Bioimpedance measurements are useful tools in biomedical engineering and life science. Bioimpedance is the electrical impedance of living tissue and can be used in the analysis of various physiological parameters. Bioimpedance is commonly measured by injecting a small well known alternating current via surface electrodes into an object under test and measuring the resultant surface voltages. It is non-invasive, painless and has no known hazards. This work presents a field programmable gate array based high accuracy broadband bioimpedance measurement system for time resolved bioimpedance measurements. The system is able to measure magnitude and phase of complex impedances under test in a frequency range of about 10-500 kHz with excitation currents from 10 µA to 5 mA. The overall measurement uncertainties stay below 1% for the impedance magnitude and below 0.5° for the phase in most measurement ranges. Furthermore, the described system has a sample rate of up to 3840 impedance spectra per second. The performance of the bioimpedance measurement system is demonstrated with a resistor based system calibration and with measurements on biological samples.

  13. High Accuracy Decoding of Dynamical Motion from a Large Retinal Population.

    Directory of Open Access Journals (Sweden)

    Olivier Marre

    2015-07-01

    Full Text Available Motion tracking is a challenge the visual system has to solve by reading out the retinal population. It is still unclear how the information from different neurons can be combined together to estimate the position of an object. Here we recorded a large population of ganglion cells in a dense patch of salamander and guinea pig retinas while displaying a bar moving diffusively. We show that the bar's position can be reconstructed from retinal activity with a precision in the hyperacuity regime using a linear decoder acting on 100+ cells. We then took advantage of this unprecedented precision to explore the spatial structure of the retina's population code. The classical view would have suggested that the firing rates of the cells form a moving hill of activity tracking the bar's position. Instead, we found that most ganglion cells in the salamander fired sparsely and idiosyncratically, so that their neural image did not track the bar. Furthermore, ganglion cell activity spanned an area much larger than predicted by their receptive fields, with cells coding for motion far in their surround. As a result, population redundancy was high, and we could find multiple, disjoint subsets of neurons that encoded the trajectory with high precision. This organization allows for diverse collections of ganglion cells to represent high-accuracy motion information in a form easily read out by downstream neural circuits.

  14. Real-Time and High-Accuracy Arctangent Computation Using CORDIC and Fast Magnitude Estimation

    Directory of Open Access Journals (Sweden)

    Luca Pilato

    2017-03-01

    Full Text Available This paper presents an improved VLSI (Very Large Scale of Integration architecture for real-time and high-accuracy computation of trigonometric functions with fixed-point arithmetic, particularly arctangent using CORDIC (Coordinate Rotation Digital Computer and fast magnitude estimation. The standard CORDIC implementation suffers of a loss of accuracy when the magnitude of the input vector becomes small. Using a fast magnitude estimator before running the standard algorithm, a pre-processing magnification is implemented, shifting the input coordinates by a proper factor. The entire architecture does not use a multiplier, it uses only shift and add primitives as the original CORDIC, and it does not change the data path precision of the CORDIC core. A bit-true case study is presented showing a reduction of the maximum phase error from 414 LSB (angle error of 0.6355 rad to 4 LSB (angle error of 0.0061 rad, with small overheads of complexity and speed. Implementation of the new architecture in 0.18 µm CMOS technology allows for real-time and low-power processing of CORDIC and arctangent, which are key functions in many embedded DSP systems. The proposed macrocell has been verified by integration in a system-on-chip, called SENSASIP (Sensor Application Specific Instruction-set Processor, for position sensor signal processing in automotive measurement applications.

  15. High Accuracy Mass Measurement of the Dripline Nuclides $^{12,14}$Be

    CERN Multimedia

    2002-01-01

    State-of-the art, three-body nuclear models that describe halo nuclides require the binding energy of the halo neutron(s) as a critical input parameter. In the case of $^{14}$Be, the uncertainty of this quantity is currently far too large (130 keV), inhibiting efforts at detailed theoretical description. A high accuracy, direct mass deterlnination of $^{14}$Be (as well as $^{12}$Be to obtain the two-neutron separation energy) is therefore required. The measurement can be performed with the MISTRAL spectrometer, which is presently the only possible solution due to required accuracy (10 keV) and short half-life (4.5 ms). Having achieved a 5 keV uncertainty for the mass of $^{11}$Li (8.6 ms), MISTRAL has proved the feasibility of such measurements. Since the current ISOLDE production rate of $^{14}$Be is only about 10/s, the installation of a beam cooler is underway in order to improve MISTRAL transmission. The projected improvement of an order of magnitude (in each transverse direction) will make this measureme...

  16. High-accuracy defect sizing for nozzle attachment welds using asymmetric TOFD

    Energy Technology Data Exchange (ETDEWEB)

    Bloodworth, T. [AEA Technology, Risley (United Kingdom)

    1999-09-01

    Inspection procedures for the detection, characterisation and high-accuracy sizing of defects in nozzle attachment welds in a Swedish BWR have been developed. These welds are set-on nozzle-to-pipe attachment welds between the main recirculation pipe and related piping systems. The nozzles and the main recirculation pipe are made of ferritic steel with austenitic stainless steel cladding on the inner surface. The overall wall thickness of the nozzle is 30 mm. The inspection uses an automated pulse-echo technique for the detection and length sizing of defects. Software for the display of complex geometry ultrasonic data is used to assist in data analysis. An unorthodox automated ultrasonic TOFD technique is used to measure the through-wall height of defects. This technique deploys probes on both the nozzle and main pipe surfaces. The TOFD data for this complex geometry are analysed using the CGTOFD software, to locate the origin of defect edge signals. The Qualification detection criterion for this inspection is the detection of defects 6 mm x 18 mm (height x length) or greater. The required length measurement accuracy is {+-}14 mm and the required through-wall height measurement accuracy is {+-}2.3 mm. This last requirement is very demanding. The inspection procedures for detection and sizing passed Procedure Qualification when measured against the above criteria on an `open` test specimen. Data collection and analysis personnel have subsequently passed Personnel Qualification using `blind` specimens. (Author)

  17. High-accuracy same-beam VLBI observations using Shanghai and Urumqi telescopes

    Institute of Scientific and Technical Information of China (English)

    KIKUCHI; Fuyuhiko; KAMATA; Shun’ichi; MATSUMOTO; Koji; HANADA; Hideo

    2009-01-01

    The same-beam VLBI observations of Rstar and Vstar,which were two small satellites of Japanese lunar mission,SELENE,were successfully performed by using Shanghai and Urumqi 25-m telescopes. When the separation angle between Rstar and Vstar was less than 0.1 deg,the differential phase delay of the X-band signals between Rstar and Vstar on Shanghai-Urumqi baseline was obtained with a very small error of 0.15 mm rms,which was reduced by 1-2 order compared with the former VLBI results. When the separation angle was less than 0.56 deg,the differential phase delay of the S-band signals was also obtained with a very small error of several mm rms. The orbit determination for Rstar and Vstar was performed,and the accuracy was improved to a level of several meters by using VLBI and Doppler data. The high-accuracy same-beam differential VLBI technique is very useful in orbit determination for a spacecraft,and will be used in orbit determination for Mars missions of China Yinghuo-1 and Russia Phobos-grunt.

  18. High-accuracy same-beam VLBI observations using Shanghai and Urumqi telescopes

    Institute of Scientific and Technical Information of China (English)

    LIU QingHui; PING JingSong; FAN QingYuan; XIA Bo; AN Tao; QIAN ZhiHan; YANG WenJun; ZHANG Hua; WANG Zhen; WANG Na; SHI Xian; KIKUCHI Fuyuhiko; HUANG Qian; KAMATA Shun'ichi; MATSUMOTO Koji; HANADA Hideo; HONG XiaoYu; YU AiLi

    2009-01-01

    The same-beam VLBI observations of Rstar and Vstar, which were two small satellites of Japanese lunar mission, SELENE, were successfully performed by using Shanghai and Urumqi 25-m telescopes.When the separation angle between Rstar and Vstar was less than 0.1 deg, the differential phase delay of the X-band signals between Rstar and Vstar on Shanghai-Urumqi baseline was obtained with a very small error of 0.15 mm rms, which was reduced by 1-2 order compared with the former VLBI results.When the separation angle was less than 0.56 deg, the differential phase delay of the S-band signals was also obtained with a very small error of several mm rms. The orbit determination for Rstar and Vstar was performed, and the accuracy was improved to a level of several meters by using VLBI and Doppler data. The high-accuracy same-beam differential VLBI technique is very useful in orbit determination for a spacecraft, and will be used in orbit determination for Mars missions of China Yinghuo-1 and Russia Phobos-grunt.

  19. High accuracy measurements of magnetic field integrals for the european XFEL undulator systems

    Science.gov (United States)

    Wolff-Fabris, Frederik; Viehweger, Marc; Li, Yuhui; Pflüger, Joachim

    2016-10-01

    Two high accuracy moving wire (MW) measurement systems based on stretched wire technique were built for the European XFEL (XFEL.EU). They were dedicated to monitor, tune and improve the magnetic field integrals properties during the serial production of the undulator segments, phase shifters and air coil correctors for XFEL.EU. For the magnetic tuning of phase shifters and the calibration of the air coils correctors a short portable MW measurement bench was built to measure first field integrals in short devices with magnetic length of less than about 300 mm and with an ultimate accuracy much better than 1 G cm (0.001 T mm). A long MW measurement setup was dedicated to obtain the total first and second field integrals on the 5-meters long undulator segments with accuracy of about 4 G cm (0.004 T mm) and 2000 G cm2 (20 T mm2) for the 1st and 2nd field integrals, respectively. Using these data a method was developed to compute the proper corrections for the air coils correctors used at both extremities so that zero first and second field integrals for an undulator segment are obtained. It is demonstrated that charging air coils correctors with these corrections results in near zero effect to the electron trajectory in the undulator systems and consequently no negative impact on the self-amplified spontaneous emission (SASE) process should occur.

  20. High-speed, high-accuracy large range 3D measurement

    Science.gov (United States)

    An, Yatong; Zhang, Song

    2017-05-01

    This paper presents such a high-speed, high-accuracy structured light technique that could achieve large range 3D shape measurement. The enabling method is our recently proposed system calibration that splits the calibration process into two stages. Specifically, we calibrate the intrinsic parameters at a near position with a regular size yet precisely fabricated calibration target, and then calibrate the extrinsic parameters with the assistance of an additional large range yet low accuracy low cost 3D scanner (i.e., Kinect). We developed a system that achieved 500 Hz with a resolution 2304 × 1400. The field of view (FOV) of our structured light system is 0.9 m(W) × 1.4 m(H) × 0.8 m(D). Our experimental data demonstrated that such a large range structured light system can achieve an mean error of 0.13 mm with a standard deviation of 1.18 mm by measuring a 304.8 mm diameter sphere. We further experimentally demonstrated that proposed method can simultaneously measure multiple objects or large dynamically changing objects.

  1. Raman spectroscopic determination of the molecular constants of the hydrogen isotopologues with high accuracy

    Energy Technology Data Exchange (ETDEWEB)

    Krasch, Bennet; Mirz, Sebastian; Groessle, Robin [Karlsruhe Institute of Technology KIT (Germany). Institute for Technical Physics (ITEP), Tritium Laboratory Karlsruhe (TLK); Collaboration: KATRIN-Collaboration

    2016-07-01

    The interest in the thermodynamic properties of gases as the chemical equilibrium is faced by the challenge of time-consuming and technical extensive experimental setups. One possible solution is the derivation of these properties from the molecular constants. The rotational and vibrational movement of diatomic molecules, as the hydrogen isotopologues, is described by the concept of the rotational anharmonic oscillator. The molecular constants are the free parameters of this concept. Molecular constants themselves can be determined by measuring the line position of rotational and/or rotational transitions e.g. with Raman spectroscopy for hydrogen as it has been done since several years. In this contribution a Raman method was development to measure the molecular constant of the hydrogen isotopologues with high accuracy to obtain reliable results. But not only the method was development but also a complete measurement uncertainty budget was set up. The uncertainty budget contains all possible sources for uncertainties from the measurement period or the analysis process as well the contribution of each single uncertainty. The method and the uncertainty budget were exemplary tested on Deuterium.

  2. Fast-type high-accuracy universal polarimeter using charge-coupled device spectrometer

    Directory of Open Access Journals (Sweden)

    Akifumi Takanabe

    2017-02-01

    Full Text Available A fast, high-accuracy universal polarimeter was developed using a charge-coupled device (CCD spectrometer (CCD-HAUP, to carry out simultaneous optical anisotropic (linear birefringence, LB; linear dichroism, LD and chiroptical (circular birefringence, CB; circular dichroism, CD measurements on single crystals without any pretreatment, in the visible region between 400–680 nm. The principle of the HAUP method is to measure the intensities of emergent light passing through a polarizer, a crystal sample, and then an analyzer, as the azimuth angles of the polarizer and analyzer are independently altered. The CCD-HAUP has the unique feature that white transmitted light intensity can be measured using a CCD spectrometer, compared with the generalized HAUP (G-HAUP system in which monochromatic transmitted light is measured using a photomultiplier. The CCD-HAUP measurements across the entire wavelength region are completed within the G-HAUP measurement time for a single wavelength. The CCD-HAUP drastically reduces the measurement time for a dataset to only 1.5 h, from the 24 h required for the G-HAUP system. LB, LD, CB, and CD measurements of single crystals of α-quartz and enantiomeric photomechanical salicylidenephenylethylamines before, during, and after ultraviolet light irradiation show results comparable to those obtained using the G-HAUP system. The newly developed system is very effective for samples susceptible to degradation induced by external stimuli, such as light and heat.

  3. Determining dynamical parameters of the Milky Way Galaxy based on high-accuracy radio astrometry

    Science.gov (United States)

    Honma, Mareki; Nagayama, Takumi; Sakai, Nobuyuki

    2015-08-01

    In this paper we evaluate how the dynamical structure of the Galaxy can be constrained by high-accuracy VLBI (Very Long Baseline Interferometry) astrometry such as VERA (VLBI Exploration of Radio Astrometry). We generate simulated samples of maser sources which follow the gas motion caused by a spiral or bar potential, with their distribution similar to those currently observed with VERA and VLBA (Very Long Baseline Array). We apply the Markov chain Monte Carlo analyses to the simulated sample sources to determine the dynamical parameter of the models. We show that one can successfully determine the initial model parameters if astrometric results are obtained for a few hundred sources with currently achieved astrometric accuracy. If astrometric data are available from 500 sources, the expected accuracy of R0 and Θ0 is ˜ 1% or higher, and parameters related to the spiral structure can be constrained by an error of 10% or with higher accuracy. We also show that the parameter determination accuracy is basically independent of the locations of resonances such as corotation and/or inner/outer Lindblad resonances. We also discuss the possibility of model selection based on the Bayesian information criterion (BIC), and demonstrate that BIC can be used to discriminate different dynamical models of the Galaxy.

  4. Reducing Systematic Centroid Errors Induced by Fiber Optic Faceplates in Intensified High-Accuracy Star Trackers

    Science.gov (United States)

    Xiong, Kun; Jiang, Jie

    2015-01-01

    Compared with traditional star trackers, intensified high-accuracy star trackers equipped with an image intensifier exhibit overwhelmingly superior dynamic performance. However, the multiple-fiber-optic faceplate structure in the image intensifier complicates the optoelectronic detecting system of star trackers and may cause considerable systematic centroid errors and poor attitude accuracy. All the sources of systematic centroid errors related to fiber optic faceplates (FOFPs) throughout the detection process of the optoelectronic system were analyzed. Based on the general expression of the systematic centroid error deduced in the frequency domain and the FOFP modulation transfer function, an accurate expression that described the systematic centroid error of FOFPs was obtained. Furthermore, reduction of the systematic error between the optical lens and the input FOFP of the intensifier, the one among multiple FOFPs and the one between the output FOFP of the intensifier and the imaging chip of the detecting system were discussed. Two important parametric constraints were acquired from the analysis. The correctness of the analysis on the optoelectronic detecting system was demonstrated through simulation and experiment. PMID:26016920

  5. Results of error correction techniques applied on two high accuracy coordinate measuring machines

    Energy Technology Data Exchange (ETDEWEB)

    Pace, C.; Doiron, T.; Stieren, D.; Borchardt, B.; Veale, R. (Sandia National Labs., Albuquerque, NM (USA); National Inst. of Standards and Technology, Gaithersburg, MD (USA))

    1990-01-01

    The Primary Standards Laboratory at Sandia National Laboratories (SNL) and the Precision Engineering Division at the National Institute of Standards and Technology (NIST) are in the process of implementing software error correction on two nearly identical high-accuracy coordinate measuring machines (CMMs). Both machines are Moore Special Tool Company M-48 CMMs which are fitted with laser positioning transducers. Although both machines were manufactured to high tolerance levels, the overall volumetric accuracy was insufficient for calibrating standards to the levels both laboratories require. The error mapping procedure was developed at NIST in the mid 1970's on an earlier but similar model. The error mapping procedure was originally very complicated and did not make any assumptions about the rigidness of the machine as it moved, each of the possible error motions was measured at each point of the error map independently. A simpler mapping procedure was developed during the early 1980's which assumed rigid body motion of the machine. This method has been used to calibrate lower accuracy machines with a high degree of success and similar software correction schemes have been implemented by many CMM manufacturers. The rigid body model has not yet been used on highly repeatable CMMs such as the M48. In this report we present early mapping data for the two M48 CMMs. The SNL CMM was manufactured in 1985 and has been in service for approximately four years, whereas the NIST CMM was delivered in early 1989. 4 refs., 5 figs.

  6. Making high-accuracy null depth measurements for the LBTI exozodi survey

    Science.gov (United States)

    Mennesson, Bertrand; Defrère, Denis; Nowak, Matthias; Hinz, Philip; Millan-Gabet, Rafael; Absil, Olivier; Bailey, Vanessa; Bryden, Geoffrey; Danchi, William; Kennedy, Grant M.; Marion, Lindsay; Roberge, Aki; Serabyn, Eugene; Skemer, Andy J.; Stapelfeldt, Karl; Weinberger, Alycia J.; Wyatt, Mark

    2016-08-01

    The characterization of exozodiacal light emission is both important for the understanding of planetary systems evolution and for the preparation of future space missions aiming to characterize low mass planets in the habitable zone of nearby main sequence stars. The Large Binocular Telescope Interferometer (LBTI) exozodi survey aims at providing a ten-fold improvement over current state of the art, measuring dust emission levels down to a typical accuracy of 12 zodis per star, for a representative ensemble of 30+ high priority targets. Such measurements promise to yield a final accuracy of about 2 zodis on the median exozodi level of the targets sample. Reaching a 1 σ measurement uncertainty of 12 zodis per star corresponds to measuring interferometric cancellation ("null") levels, i.e visibilities at the few 100 ppm uncertainty level. We discuss here the challenges posed by making such high accuracy mid-infrared visibility measurements from the ground and present the methodology we developed for achieving current best levels of 500 ppm or so. We also discuss current limitations and plans for enhanced exozodi observations over the next few years at LBTI.

  7. High-Accuracy, Compact Scanning Method and Circuit for Resistive Sensor Arrays

    Directory of Open Access Journals (Sweden)

    Jong-Seok Kim

    2016-01-01

    Full Text Available The zero-potential scanning circuit is widely used as read-out circuit for resistive sensor arrays because it removes a well known problem: crosstalk current. The zero-potential scanning circuit can be divided into two groups based on type of row drivers. One type is a row driver using digital buffers. It can be easily implemented because of its simple structure, but we found that it can cause a large read-out error which originates from on-resistance of the digital buffers used in the row driver. The other type is a row driver composed of operational amplifiers. It, very accurately, reads the sensor resistance, but it uses a large number of operational amplifiers to drive rows of the sensor array; therefore, it severely increases the power consumption, cost, and system complexity. To resolve the inaccuracy or high complexity problems founded in those previous circuits, we propose a new row driver which uses only one operational amplifier to drive all rows of a sensor array with high accuracy. The measurement results with the proposed circuit to drive a 4 × 4 resistor array show that the maximum error is only 0.1% which is remarkably reduced from 30.7% of the previous counterpart.

  8. A fast and high accuracy numerical simulation algorithm of the polymer spherulite at the mesoscale Level

    Science.gov (United States)

    Liu, Yongzhi; Geng, Tie; (Tom Turng, Lih-Sheng; Liu, Chuntai; Cao, Wei; Shen, Changyu

    2017-09-01

    In the multiscale numerical simulation of polymer crystallization during the processing period, flow and temperature of the polymer melt are simulated on the macroscale level, while nucleation and growth of the spherulite are simulated at the mesoscale level. As a part of the multiscale simulation, the meso-simulation requires a fast solving speed because the meso-simulation software must be run several times in every macro-element at each macro-step. Meanwhile, the accuracy of the calculation results is also very important. It is known that the simulation geometry of crystallization includes planar (2D) and three-dimensional space (3D). The 3D calculations are more accurate but more expensive because of the long CPU time consumed. On the contrary, 2D calculations are always much faster but lower in accuracy. To reach the desirable speed and high accuracy at the same time, an algorithm is presented, in which the Delesse law coupled with the Monte Carlo method and pixel method are employed to simulate the nucleation, growth, and impingement of the polymer spherulite at the mesoscale level. Based on this algorithm, a software is developed with the Visual C++ language, and its numerical examples’ results prove that the solving speed of this algorithm is as fast as the 2D classical simulation and the calculation accuracy is at the same level as the 3D simulation.

  9. 基于P/T数字转台的计算机控制课程设计%Curriculum design of computer control technology based on P/T digital indexing table

    Institute of Scientific and Technical Information of China (English)

    许谨; 席剑辉; 齐胜男

    2012-01-01

    为了配合计算机控制技术课程的教学,加强学生对计算机控制技术的认识,开设了相关的课程设计.利用固高公司的产品—P/T数字转台实验系统为平台,开设相关的课程设计,要求学生以C++或其他高级语言为开发工具,根据学生的个体差异,提出不同的课程设计要求.通过课程设计,使学生进一步了解计算机控制技术的理论知识,并提高独立分析、解决问题和程序设计的能力.%To coordinate with the computer control technology curriculum, the related curriculum design is set up. Googol Technology Limited production of P/T digital indexing table is chosen for development platform, C + + or other senior language is chosen for development tools. According to the student' s individual differences, different course design requirements are put forward. This curriculum design can help students to further understand the theoretic knowledge of the computer control technology and improve their abilities of programming and problem-solving.

  10. Initial development of high-accuracy CFRP panel for DATE5 antenna

    Science.gov (United States)

    Qian, Yuan; Lou, Zheng; Hao, Xufeng; Zhu, Jing; Cheng, Jingquan; Wang, Hairen; Zuo, Yingxi; Yang, Ji

    2016-07-01

    DATE5 antenna, which is a 5m telescope for terahertz exploration, will be sited at Dome A, Antarctica. It is necessary to keep high surface accuracy of the primary reflector panels so that high observing efficiency can be achieved. In antenna field, carbon fiber reinforced composite (CFRP) sandwich panels are widely used as these panels are light in weight, high in strength, low in thermal expansion, and cheap in mass fabrication. In DATE5 project, CFRP panels are important panel candidates. In the design study phase, a CFRP prototype panel of 1-meter size is initially developed for the verification purpose. This paper introduces the material arrangement in the sandwich panel, measured performance of this testing sandwich structure samples, and together with the panel forming process. For anti-icing in the South Pole region, a special CFRP heating film is embedded in the front skin of sandwich panel. The properties of some types of basic building materials are tested. Base on the results, the deformation of prototype panel with different sandwich structures and skin layers are simulated and a best structural concept is selected. The panel mold used is a high accuracy one with a surface rms error of 1.4 μm. Prototype panels are replicated from the mold. Room temperature curing resin is used to reduce the thermal deformation in the resin transfer process. In the curing, vacuum negative pressure technology is also used to increase the volume content of carbon fiber. After the measurement of the three coordinate measure machine (CMM), a prototype CFRP panel of 5.1 μm rms surface error is developed initially.

  11. Automated, high accuracy classification of Parkinsonian disorders: a pattern recognition approach.

    Directory of Open Access Journals (Sweden)

    Andre F Marquand

    Full Text Available Progressive supranuclear palsy (PSP, multiple system atrophy (MSA and idiopathic Parkinson's disease (IPD can be clinically indistinguishable, especially in the early stages, despite distinct patterns of molecular pathology. Structural neuroimaging holds promise for providing objective biomarkers for discriminating these diseases at the single subject level but all studies to date have reported incomplete separation of disease groups. In this study, we employed multi-class pattern recognition to assess the value of anatomical patterns derived from a widely available structural neuroimaging sequence for automated classification of these disorders. To achieve this, 17 patients with PSP, 14 with IPD and 19 with MSA were scanned using structural MRI along with 19 healthy controls (HCs. An advanced probabilistic pattern recognition approach was employed to evaluate the diagnostic value of several pre-defined anatomical patterns for discriminating the disorders, including: (i a subcortical motor network; (ii each of its component regions and (iii the whole brain. All disease groups could be discriminated simultaneously with high accuracy using the subcortical motor network. The region providing the most accurate predictions overall was the midbrain/brainstem, which discriminated all disease groups from one another and from HCs. The subcortical network also produced more accurate predictions than the whole brain and all of its constituent regions. PSP was accurately predicted from the midbrain/brainstem, cerebellum and all basal ganglia compartments; MSA from the midbrain/brainstem and cerebellum and IPD from the midbrain/brainstem only. This study demonstrates that automated analysis of structural MRI can accurately predict diagnosis in individual patients with Parkinsonian disorders, and identifies distinct patterns of regional atrophy particularly useful for this process.

  12. High accuracy solution of bi-directional wave propagation in continuum mechanics

    Science.gov (United States)

    Mulloth, Akhil; Sawant, Nilesh; Haider, Ijlal; Sharma, Nidhi; Sengupta, Tapan K.

    2015-10-01

    Solution of partial differential equations by numerical method is strongly affected due to numerical errors, which are caused mainly by deviation of numerical dispersion relation from the physical dispersion relation. To quantify and control such errors and obtain high accuracy solutions, we consider a class of problems which involve second derivative of unknowns with respect to time. Here, we analyse numerical metrics such as the numerical group velocity, numerical phase speed and the numerical amplification factor for different methods in solving the model bi-directional wave equation (BDWE). Such equations can be solved directly, for example, by Runge-Kutta-Nyström (RKN) method. Alternatively, the governing equation can be converted to a set of first order in time equations and then using four-stage fourth order Runge-Kutta (RK4) method for time integration. Spatial discretisation considered are the classical second and fourth order central difference schemes, along with Lele's central compact scheme for evaluating second derivatives. In another version, we have used Lele's scheme for evaluating first derivatives twice to obtain the second derivative. As BDWE represents non-dissipative, non-dispersive dynamics, we also consider the canonical problem of linearised rotating shallow water equation (LRSWE) in a new formulation involving second order derivative in time, which represents dispersive waves along with a stationary mode. The computations of LRSWE with RK4 and RKN methods for temporal discretisation and Lele's compact schemes for spatial discretisation are compared with computations performed with RK4 method for time discretisation and staggered compact scheme (SCS) for spatial discretisation by treating it as a set of three equations as reported in Rajpoot et al. (2012) [1].

  13. In-depth, high-accuracy proteomics of sea urchin tooth organic matrix

    Directory of Open Access Journals (Sweden)

    Mann Matthias

    2008-12-01

    Full Text Available Abstract Background The organic matrix contained in biominerals plays an important role in regulating mineralization and in determining biomineral properties. However, most components of biomineral matrices remain unknown at present. In sea urchin tooth, which is an important model for developmental biology and biomineralization, only few matrix components have been identified. The recent publication of the Strongylocentrotus purpuratus genome sequence rendered possible not only the identification of genes potentially coding for matrix proteins, but also the direct identification of proteins contained in matrices of skeletal elements by in-depth, high-accuracy proteomic analysis. Results We identified 138 proteins in the matrix of tooth powder. Only 56 of these proteins were previously identified in the matrices of test (shell and spine. Among the novel components was an interesting group of five proteins containing alanine- and proline-rich neutral or basic motifs separated by acidic glycine-rich motifs. In addition, four of the five proteins contained either one or two predicted Kazal protease inhibitor domains. The major components of tooth matrix were however largely identical to the set of spicule matrix proteins and MSP130-related proteins identified in test (shell and spine matrix. Comparison of the matrices of crushed teeth to intact teeth revealed a marked dilution of known intracrystalline matrix proteins and a concomitant increase in some intracellular proteins. Conclusion This report presents the most comprehensive list of sea urchin tooth matrix proteins available at present. The complex mixture of proteins identified may reflect many different aspects of the mineralization process. A comparison between intact tooth matrix, presumably containing odontoblast remnants, and crushed tooth matrix served to differentiate between matrix components and possible contributions of cellular remnants. Because LC-MS/MS-based methods directly

  14. A Smart High Accuracy Silicon Piezoresistive Pressure Sensor Temperature Compensation System

    Directory of Open Access Journals (Sweden)

    Guanwu Zhou

    2014-07-01

    Full Text Available Theoretical analysis in this paper indicates that the accuracy of a silicon piezoresistive pressure sensor is mainly affected by thermal drift, and varies nonlinearly with the temperature. Here, a smart temperature compensation system to reduce its effect on accuracy is proposed. Firstly, an effective conditioning circuit for signal processing and data acquisition is designed. The hardware to implement the system is fabricated. Then, a program is developed on LabVIEW which incorporates an extreme learning machine (ELM as the calibration algorithm for the pressure drift. The implementation of the algorithm was ported to a micro-control unit (MCU after calibration in the computer. Practical pressure measurement experiments are carried out to verify the system’s performance. The temperature compensation is solved in the interval from −40 to 85 °C. The compensated sensor is aimed at providing pressure measurement in oil-gas pipelines. Compared with other algorithms, ELM acquires higher accuracy and is more suitable for batch compensation because of its higher generalization and faster learning speed. The accuracy, linearity, zero temperature coefficient and sensitivity temperature coefficient of the tested sensor are 2.57% FS, 2.49% FS, 8.1 × 10−5/°C and 29.5 × 10−5/°C before compensation, and are improved to 0.13%FS, 0.15%FS, 1.17 × 10−5/°C and 2.1 × 10−5/°C respectively, after compensation. The experimental results demonstrate that the proposed system is valid for the temperature compensation and high accuracy requirement of the sensor.

  15. High accuracy of arterial spin labeling perfusion imaging in differentiation of pilomyxoid from pilocytic astrocytoma

    Energy Technology Data Exchange (ETDEWEB)

    Nabavizadeh, S.A.; Assadsangabi, R.; Hajmomenian, M.; Vossough, A. [Perelman School of Medicine of the University of Pennsylvania, Department of Radiology, Children' s Hospital of Philadelphia, Philadelphia, PA (United States); Santi, M. [Perelman School of Medicine of the University of Pennsylvania, Department of Pathology, Children' s Hospital of Philadelphia, Philadelphia, PA (United States)

    2015-05-01

    Pilomyxoid astrocytoma (PMA) is a relatively new tumor entity which has been added to the 2007 WHO Classification of tumors of the central nervous system. The goal of this study is to utilize arterial spin labeling (ASL) perfusion imaging to differentiate PMA from pilocytic astrocytoma (PA). Pulsed ASL and conventional MRI sequences of patients with PMA and PA in the past 5 years were retrospectively evaluated. Patients with history of radiation or treatment with anti-angiogenic drugs were excluded. A total of 24 patients (9 PMA, 15 PA) were included. There were statistically significant differences between PMA and PA in mean tumor/gray matter (GM) cerebral blood flow (CBF) ratios (1.3 vs 0.4, p < 0.001) and maximum tumor/GM CBF ratio (2.3 vs 1, p < 0.001). Area under the receiver operating characteristic (ROC) curves for differentiation of PMA from PA was 0.91 using mean tumor CBF, 0.95 using mean tumor/GM CBF ratios, and 0.89 using maximum tumor/GM CBF. Using a threshold value of 0.91, the mean tumor/GM CBF ratio was able to diagnose PMA with 77 % sensitivity, 100 % specificity, and a threshold value of 0.7, provided 88 % sensitivity and 86 % specificity. There was no statistically significant difference between the two tumors in enhancement pattern (p = 0.33), internal architecture (p = 0.15), or apparent diffusion coefficient (ADC) values (p = 0.07). ASL imaging has high accuracy in differentiating PMA from PA. The result of this study may have important applications in prognostication and treatment planning especially in patients with less accessible tumors such as hypothalamic-chiasmatic gliomas. (orig.)

  16. Ultra-high accuracy optical testing: creating diffraction-limitedshort-wavelength optical systems

    Energy Technology Data Exchange (ETDEWEB)

    Goldberg, Kenneth A.; Naulleau, Patrick P.; Rekawa, Senajith B.; Denham, Paul E.; Liddle, J. Alexander; Gullikson, Eric M.; Jackson, KeithH.; Anderson, Erik H.; Taylor, John S.; Sommargren, Gary E.; Chapman,Henry N.; Phillion, Donald W.; Johnson, Michael; Barty, Anton; Soufli,Regina; Spiller, Eberhard A.; Walton, Christopher C.; Bajt, Sasa

    2005-08-03

    Since 1993, research in the fabrication of extreme ultraviolet (EUV) optical imaging systems, conducted at Lawrence Berkeley National Laboratory (LBNL) and Lawrence Livermore National Laboratory (LLNL), has produced the highest resolution optical systems ever made. We have pioneered the development of ultra-high-accuracy optical testing and alignment methods, working at extreme ultraviolet wavelengths, and pushing wavefront-measuring interferometry into the 2-20-nm wavelength range (60-600 eV). These coherent measurement techniques, including lateral shearing interferometry and phase-shifting point-diffraction interferometry (PS/PDI) have achieved RMS wavefront measurement accuracies of 0.5-1-{angstrom} and better for primary aberration terms, enabling the creation of diffraction-limited EUV optics. The measurement accuracy is established using careful null-testing procedures, and has been verified repeatedly through high-resolution imaging. We believe these methods are broadly applicable to the advancement of short-wavelength optical systems including space telescopes, microscope objectives, projection lenses, synchrotron beamline optics, diffractive and holographic optics, and more. Measurements have been performed on a tunable undulator beamline at LBNL's Advanced Light Source (ALS), optimized for high coherent flux; although many of these techniques should be adaptable to alternative ultraviolet, EUV, and soft x-ray light sources. To date, we have measured nine prototype all-reflective EUV optical systems with NA values between 0.08 and 0.30 (f/6.25 to f/1.67). These projection-imaging lenses were created for the semiconductor industry's advanced research in EUV photolithography, a technology slated for introduction in 2009-13. This paper reviews the methods used and our program's accomplishments to date.

  17. League tables for orthodontists

    Science.gov (United States)

    Richmond, Stephen; Phillips, Ceri; Durning, Peter

    2008-01-01

    The aim of this study was to explore the complexities in constructing league tables purporting to measure orthodontic clinical outcomes. Eighteen orthodontists were invited to participate in a cost-effectiveness study. Each orthodontist was asked to provide information on 100 consecutively treated patients. The Index of Complexity, Outcome, and Need (ICON) was used to assess treatment need, complexity, and outcome prior to, and on completion of, orthodontic treatment. The 18 orthodontists were ranked based on achieving a successful orthodontic outcome (ICON score less than or equal to 30) and the uncertainty in both the success rates and rankings was also quantified using confidence intervals. Successful outcomes were achieved in 62 per cent of the sample (range 19–94 per cent); four of the 18 orthodontists failed to achieve more than a 50 per cent success rate. In developing league tables, it is imperative that factors such as case mix are identified and accounted for in producing rankings. Bayesian hierarchical modelling was used to achieve this and to quantify uncertainty in the rankings produced. When case mix was taken into account, the four with low success rates were clearly not as good as the top four performing orthodontists. League tables can be valuable for the individual orthodontist, groups of orthodontists, payment/insurance agencies, and the public to enable informed choice for orthodontic provision but must be correctly constructed so that users can have confidence in them. PMID:18687990

  18. Table of tables: A database design tool for SYBASE

    Energy Technology Data Exchange (ETDEWEB)

    Brown, B.C.; Coulter, K.; Glass, H.D.; Glosson, R.; Hanft, R.W.; Harding, D.J.; Trombly-Freytag, K.; Walbridge, D.G.C.; Wallis, D.B. (Fermi National Accelerator Lab., Batavia, IL (USA)); Allen, M.E. (Superconducting Super Collider Lab., Dallas, TX (USA))

    1991-01-04

    The Table of Tables' application system captures in a set of SYBASE tables the basic design specification for a database schema. Specification of tables, columns (including the related defaults and rules for the stored values) and keys is provided. The feature which makes this application specifically useful for SYBASE is the ability to automatically generate SYBASE triggers. A description field is provided for each database object. Based on the data stored, SQL scripts for creating complete schema including the tables, their defaults and rules, their indexes, and their SYBASE triggers, are written by TOT. Insert, update and delete triggers are generated from TOT to guarantee integrity of data relations when tables are connected by single column foreign keys. The application is written in SYBASE's APT-SQL and includes a forms based data entry system. Using the features of TOT we can create a complete database schema for which the data integrity specified by our design is guaranteed by the SYBASE triggers generated by TOT. 3 refs.

  19. Statistical downscaling of precipitation using local regression and high accuracy surface modeling method

    Science.gov (United States)

    Zhao, Na; Yue, Tianxiang; Zhou, Xun; Zhao, Mingwei; Liu, Yu; Du, Zhengping; Zhang, Lili

    2017-07-01

    Downscaling precipitation is required in local scale climate impact studies. In this paper, a statistical downscaling scheme was presented with a combination of geographically weighted regression (GWR) model and a recently developed method, high accuracy surface modeling method (HASM). This proposed method was compared with another downscaling method using the Coupled Model Intercomparison Project Phase 5 (CMIP5) database and ground-based data from 732 stations across China for the period 1976-2005. The residual which was produced by GWR was modified by comparing different interpolators including HASM, Kriging, inverse distance weighted method (IDW), and Spline. The spatial downscaling from 1° to 1-km grids for period 1976-2005 and future scenarios was achieved by using the proposed downscaling method. The prediction accuracy was assessed at two separate validation sites throughout China and Jiangxi Province on both annual and seasonal scales, with the root mean square error (RMSE), mean relative error (MRE), and mean absolute error (MAE). The results indicate that the developed model in this study outperforms the method that builds transfer function using the gauge values. There is a large improvement in the results when using a residual correction with meteorological station observations. In comparison with other three classical interpolators, HASM shows better performance in modifying the residual produced by local regression method. The success of the developed technique lies in the effective use of the datasets and the modification process of the residual by using HASM. The results from the future climate scenarios show that precipitation exhibits overall increasing trend from T1 (2011-2040) to T2 (2041-2070) and T2 to T3 (2071-2100) in RCP2.6, RCP4.5, and RCP8.5 emission scenarios. The most significant increase occurs in RCP8.5 from T2 to T3, while the lowest increase is found in RCP2.6 from T2 to T3, increased by 47.11 and 2.12 mm, respectively.

  20. Integrative fitting of absorption line profiles with high accuracy, robustness, and speed

    Science.gov (United States)

    Skrotzki, Julian; Habig, Jan Christoph; Ebert, Volker

    2014-08-01

    The principle of the integrative evaluation of absorption line profiles relies on the numeric integration of absorption line signals to retrieve absorber concentrations, e.g., of trace gases. Thus, it is a fast and robust technique. However, previous implementations of the integrative evaluation principle showed shortcomings in terms of accuracy and the lack of a fit quality indicator. This has motivated the development of an advanced integrative (AI) fitting algorithm. The AI fitting algorithm retains the advantages of previous integrative implementations—robustness and speed—and is able to achieve high accuracy by introduction of a novel iterative fitting process. A comparison of the AI fitting algorithm with the widely used Levenberg-Marquardt (LM) fitting algorithm indicates that the AI algorithm has advantages in terms of robustness due to its independence from appropriately chosen start values for the initialization of the fitting process. In addition, the AI fitting algorithm shows speed advantages typically resulting in a factor of three to four shorter computational times on a standard personal computer. The LM algorithm on the other hand retains advantages in terms of a much higher flexibility, as the AI fitting algorithm is restricted to the evaluation of single absorption lines with precomputed line width. Comparing both fitting algorithms for the specific application of in situ laser hygrometry at 1,370 nm using direct tunable diode laser absorption spectroscopy (TDLAS) suggests that the accuracy of the AI algorithm is equivalent to that of the LM algorithm. For example, a signal-to-noise ratio of 80 and better typically yields a deviation of TDLAS hygrometry at the aerosol and cloud chamber aerosol interactions and dynamics in the atmosphere (AIDA)—a unique large-scale facility to study atmospheric processes. The robustness of the AI fitting algorithm has been validated for typical AIDA conditions encompassing strong transmission fluctuations

  1. The research of digital circuit system for high accuracy CCD of portable Raman spectrometer

    Science.gov (United States)

    Yin, Yu; Cui, Yongsheng; Zhang, Xiuda; Yan, Huimin

    2013-08-01

    The Raman spectrum technology is widely used for it can identify various types of molecular structure and material. The portable Raman spectrometer has become a hot direction of the spectrometer development nowadays for its convenience in handheld operation and real-time detection which is superior to traditional Raman spectrometer with heavy weight and bulky size. But there is still a gap for its measurement sensitivity between portable and traditional devices. However, portable Raman Spectrometer with Shell-Isolated Nanoparticle-Enhanced Raman Spectroscopy (SHINERS) technology can enhance the Raman signal significantly by several orders of magnitude, giving consideration in both measurement sensitivity and mobility. This paper proposed a design and implementation of driver and digital circuit for high accuracy CCD sensor, which is core part of portable spectrometer. The main target of the whole design is to reduce the dark current generation rate and increase signal sensitivity during the long integration time, and in the weak signal environment. In this case, we use back-thinned CCD image sensor from Hamamatsu Corporation with high sensitivity, low noise and large dynamic range. In order to maximize this CCD sensor's performance and minimize the whole size of the device simultaneously to achieve the project indicators, we delicately designed a peripheral circuit for the CCD sensor. The design is mainly composed with multi-voltage circuit, sequential generation circuit, driving circuit and A/D transition parts. As the most important power supply circuit, the multi-voltage circuits with 12 independent voltages are designed with reference power supply IC and set to specified voltage value by the amplifier making up the low-pass filter, which allows the user to obtain a highly stable and accurate voltage with low noise. What's more, to make our design easy to debug, CPLD is selected to generate sequential signal. The A/D converter chip consists of a correlated

  2. Statistical downscaling of precipitation using local regression and high accuracy surface modeling method

    Science.gov (United States)

    Zhao, Na; Yue, Tianxiang; Zhou, Xun; Zhao, Mingwei; Liu, Yu; Du, Zhengping; Zhang, Lili

    2016-03-01

    Downscaling precipitation is required in local scale climate impact studies. In this paper, a statistical downscaling scheme was presented with a combination of geographically weighted regression (GWR) model and a recently developed method, high accuracy surface modeling method (HASM). This proposed method was compared with another downscaling method using the Coupled Model Intercomparison Project Phase 5 (CMIP5) database and ground-based data from 732 stations across China for the period 1976-2005. The residual which was produced by GWR was modified by comparing different interpolators including HASM, Kriging, inverse distance weighted method (IDW), and Spline. The spatial downscaling from 1° to 1-km grids for period 1976-2005 and future scenarios was achieved by using the proposed downscaling method. The prediction accuracy was assessed at two separate validation sites throughout China and Jiangxi Province on both annual and seasonal scales, with the root mean square error (RMSE), mean relative error (MRE), and mean absolute error (MAE). The results indicate that the developed model in this study outperforms the method that builds transfer function using the gauge values. There is a large improvement in the results when using a residual correction with meteorological station observations. In comparison with other three classical interpolators, HASM shows better performance in modifying the residual produced by local regression method. The success of the developed technique lies in the effective use of the datasets and the modification process of the residual by using HASM. The results from the future climate scenarios show that precipitation exhibits overall increasing trend from T1 (2011-2040) to T2 (2041-2070) and T2 to T3 (2071-2100) in RCP2.6, RCP4.5, and RCP8.5 emission scenarios. The most significant increase occurs in RCP8.5 from T2 to T3, while the lowest increase is found in RCP2.6 from T2 to T3, increased by 47.11 and 2.12 mm, respectively.

  3. High-accuracy real-time automatic thresholding for centroid tracker

    Science.gov (United States)

    Zhang, Ye; Wang, Yanjie

    2006-01-01

    Many of the video image trackers today use the centroid as the tracking point. In engineering, a target's centroid is computed from a binary image to reduce the processing time. Hence thresholding of gray level image to binary image is a decisive step in centroid tracking. How to choose the feat thresholds in clutter is still an intractability problem unsolved today. This paper introduces a high-accuracy real-time automatic thresholding method for centroid tracker. It works well for variety types of target tracking in clutter. The core of this method is to get the entire information contained in the histogram, such as the number of the peaks, their height, position and other properties in the histogram. Combine with this histogram analysis; we can get several key pairs of peaks which can include the target and the background around it and use the method of Otsu to get intensity thresholds from them. According to the thresholds, we can gain the binary image and get the centroid from it. To track the target, the paper also suggests subjoining an eyeshot-window, just like our eyes focus on a target, we will not miss it unless it is out of our eyeshot, the impression will help us to extract the target in clutter and track it and we will wait its emergence since it has been covered. To obtain the impression, the paper offers a idea comes from the method of Snakes; it give a great help for us to get a glancing size, so that we can compare the size of the object in the current frame with the former. If the change is little, we consider the object has been tracked well. Otherwise, if the change is bigger than usual, we should analyze the inflection in the histogram to find out what happened to the object. In general, what we have to do is turning the analysis into codes for the tracker to determine a feat threshold. The paper will show the steps in detail. The paper also discusses the hardware architecture which can meet the speed requirement.

  4. HIGH ACCURACY FINITE VOLUME ELEMENT METHOD FOR TWO-POINT BOUNDARY VALUE PROBLEM OF SECOND ORDER ORDINARY DIFFERENTIAL EQUATIONS

    Institute of Scientific and Technical Information of China (English)

    王同科

    2002-01-01

    In this paper, a high accuracy finite volume element method is presented for two-point boundary value problem of second order ordinary differential equation, which differs fromthe high order generalized difference methods. It is proved that the method has optimal order er-ror estimate O(h3) in H1 norm. Finally, two examples show that the method is effective.

  5. Millimeter-Wave Airborne Interferometry for High-accuracy Topography Mapping

    Science.gov (United States)

    Moller, D.; Hensley, S.; Wu, X.; Rodriguez, E.

    2011-12-01

    sensor geometry, bandwidth and number of channels needed for SWOT cal/val cannot be met within the framework of GLISTIN-A or a similar interface to UAVSAR. To address SWOT's cal/val requirements, the Ka-band SWOT Phenomenology Airborne Radar (KaSPAR) builds upon GLISTIN-A heritage and is the primary payload of the AirSWOT program. KaSPAR is a unique system with multiple temporal and cross-track baselines to fully characterize the scattering and statistics expected from SWOT, provide data for developing classification algorithms, and understanding instrument performance over the vast variety of scenes that SWOT will encounter. Furthermore a >5km swath high-accuracy WSE mapping capability provides the framework to translate traditional point or profile measurements to the spatial framework that SWOT will measure. Specific measurements from the integrated AirSWOT assembly are 1) WSE maps over a 5km swath with <3cm mean error at 100m x 100m postings (for ocean surface at 6m/s wind speed), 2) 2-D slope maps derived from WSE maps and 3) shoreline delineation at 10m resolution. These measurements will be made at resolutions exceeding that of SWOT to better characterize corrections for the spaceborne sensor.

  6. Towards Building Reliable, High-Accuracy Solar Irradiance Database For Arid Climates

    Science.gov (United States)

    Munawwar, S.; Ghedira, H.

    2012-12-01

    based models and tools can subsequently be recalibrated or improvised to address the unique features of characteristically high aerosol load, frequent dust episodes and yet, typically clear skies, in the Gulf's primarily arid region. For example, though clouds are an important factor, radiative extinction in desert climates is primarily due to aerosols; a fact that needs to be taken into consideration since most of the existing solar radiation models are technically cloud-based. Satellite derived irradiance, although carrying a tag of uncertainties (5-10%), have special relevance in the Gulf due to lack of long-term data at the source of application. Satellite data can be merged or combined with short-term ground measurements, by various techniques available in the literature, to smooth out uncertainties in the data and build high-accuracy long-term solar irradiance profiles. Such concatenation is of particular interest to investors as it provides vital information on solar resource variability.

  7. Les Tables de salon (Coffee Tables)

    Science.gov (United States)

    Rondina, Marisa; Gilbert, Rodrigue

    1977-01-01

    Terms for such things as furniture in English reflect function and are specific, not generic in nature. French equivalents are based on linguistic criteria. "Tables basses" or "tables de salon" are equivalents of "coffee tables"; they illustrate the tendency toward the generic of the French language. (Text is in French.) (AMH)

  8. A High Accuracy Pedestrian Detection System Combining a Cascade AdaBoost Detector and Random Vector Functional-Link Net

    OpenAIRE

    Zhihui Wang; Sook Yoon; Shan Juan Xie; Yu Lu; Dong Sun Park

    2014-01-01

    In pedestrian detection methods, their high accuracy detection rates are always obtained at the cost of a large amount of false pedestrians. In order to overcome this problem, the authors propose an accurate pedestrian detection system based on two machine learning methods: cascade AdaBoost detector and random vector functional-link net. During the offline training phase, the parameters of a cascade AdaBoost detector and random vector functional-link net are trained by standard dataset. These...

  9. Estimating index of population trend by re-sampling techniques (jackknife and bootstrap) and its application to the life table study of rice leaf roller, Cnaphalocrocis medinalis(Lepidoptera: Pyralidae)

    Institute of Scientific and Technical Information of China (English)

    Fang-Ling Tao; Shi-Fan Min; Wei-Jian Wu; Guang-Wen Liang; Ling Zeng

    2008-01-01

    Taking a published natural population life table office leaf roller, Cnaphalocrocis medinalis (Lepidoptera: Pyralidae), as an example, we estimated the population trend index,I, via re-sampling methods (jackknife and bootstrap), determined its statistical properties and illustrated the application of these methods in determining the control effectiveness of bio-agents and chemical insecticides. Depending on the simulation outputs, the smoothed distribution pattern of the estimates of I by delete-1 jackknife is visually distinguishable from the normal density, but the smoothed pattern produced by delete-d jackknife, and logarithm-transformed smoothed patterns produced by both empirical and parametric bootstraps,matched well the corresponding normal density. Thus, the estimates of I produced by delete-1 jackknife were not used to determine the suppressive effect of wasps and insecticides. The 95% percent confidence intervals or the narrowest 95 percentiles and Z-test criterion were employed to compare the effectiveness of Trichogrammajaponicum Ashmead and insecti-cides (powder, 1.5% mevinphos + 3% alpha-hexachloro cyclohexane) against the rice leaf roller based on the estimates of I produced by delete-d jackknife and bootstrap techniques.At α= 0.05 level, there were statistical differences between wasp treatment and control, and between wasp and insecticide treatments, if the normality is ensured, or by the narrowest 95 percentiles. However, there is still no difference between insecticide treatment and control.By Z-test criterion, wasp treatment is better than control and insecticide treatment with P-value<0.01. Insecticide treatment is similar to control with P-value > 0.2 indicating that 95% confidence intervals procedure is more conservative. Although similar conclusions may be drawn by re-sampling techniques, such as the delta method, about the suppressive effect of trichogramma and insecticides, the normality of the estimates can be checked and guaranteed

  10. High accuracy indirect optical manipulation of live cells with functionalized microtools

    Science.gov (United States)

    Vizsnyiczai, Gaszton; Aekbote, Badri L.; Buzás, András.; Grexa, István.; Ormos, Pál.; Kelemen, Lóránd

    2016-09-01

    Optical micro manipulation of live cells has been extensively used to study a wide range of cellular phenomena with relevance in basic research or in diagnostics. The approaches span from manipulation of many cells for high throughput measurement or sorting, to more elaborated studies of intracellular events on trapped single cells when coupled with modern imaging techniques. In case of direct cell trapping the damaging effects of light-cell interaction must be minimized, for instance with the choice of proper laser wavelength. Microbeads have already been used for trapping cells indirectly thereby reducing the irradiation damage and increasing trapping efficiency with their high refractive index contrast. We show here that such intermediate objects can be tailor-made for indirect cell trapping to further increase cell-to-focal spot distance while maintaining their free and fast maneuverability. Carefully designed structures were produced with two-photon polymerization with shapes optimized for effective manipulation and cell attachment. Functionalization of the microstructures is also presented that enables cell attachment to them within a few seconds with strength much higher that the optical forces. Fast cell actuation in 6 degrees of freedom is demonstrated with the outlook to possible applications in cell imaging.

  11. Real-time displacement measurement with large range and high accuracy using sinusoidal phase modulating laser diode interferometer

    Institute of Scientific and Technical Information of China (English)

    Guotian He; Xiangzhao Wang; Aijun Zeng; Feng Tang; Bingjie Huang

    2007-01-01

    To resolve the conflict of large measurement range and high accuracy in the existing real-time displacement measurement laser diode (LD) interferometers, a novel real-time displacement measurement LD interferometry is proposed and its measurement principle is analyzed. By use of a new phase demodulation algorithm and a new phase compensation lgorithm of real-time phase unwrapping, the measurement accuracy is improved, and the measurement range is enlarged to a few wavelengths. In experiments, the peak-to-peak amplitude of the speaker vibration was 2361.7 nm, and the repeatability was 2.56 nm. The measurement time was less than 26μs.

  12. NNDSS - Table II. Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Vibriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year), and...

  13. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2014.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  14. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2016.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  15. NNDSS - Table IV. Tuberculosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table IV. Tuberculosis - 2015.This Table includes total number of cases reported in the United States, by region and by states, in accordance with the...

  16. Pension Insurance Data Tables

    Data.gov (United States)

    Pension Benefit Guaranty Corporation — Find out about retirement trends in PBGC's data tables. The tables include statistics on the people and pensions that PBGC protects, including how many Americans are...

  17. Tabled Execution in Scheme

    Energy Technology Data Exchange (ETDEWEB)

    Willcock, J J; Lumsdaine, A; Quinlan, D J

    2008-08-19

    Tabled execution is a generalization of memorization developed by the logic programming community. It not only saves results from tabled predicates, but also stores the set of currently active calls to them; tabled execution can thus provide meaningful semantics for programs that seemingly contain infinite recursions with the same arguments. In logic programming, tabled execution is used for many purposes, both for improving the efficiency of programs, and making tasks simpler and more direct to express than with normal logic programs. However, tabled execution is only infrequently applied in mainstream functional languages such as Scheme. We demonstrate an elegant implementation of tabled execution in Scheme, using a mix of continuation-passing style and mutable data. We also show the use of tabled execution in Scheme for a problem in formal language and automata theory, demonstrating that tabled execution can be a valuable tool for Scheme users.

  18. Adaptive switching frequency buck DC—DC converter with high-accuracy on-chip current sensor

    Science.gov (United States)

    Jinguang, Jiang; Fei, Huang; Zhihui, Xiong

    2015-05-01

    A current-mode PWM buck DC—DC converter is proposed. With the high-accuracy on-chip current sensor, the switching frequency can be selected automatically according to load requirements. This method improves efficiency and obtains an excellent transient response. The high accuracy of the current sensor is achieved by a simple switch technique without an amplifier. This has the direct benefit of reducing power dissipation and die size. Additionally, a novel soft-start circuit is presented to avoid the inrush current at the starting up state. Finally, this DC—DC converter is fabricated with the 0.5 μm standard CMOS process. The chip occupies 3.38 mm2. The accuracy of the proposed current sensor can achieve 99.5% @ 200 mA. Experimental results show that the peak efficiency is 91.8%. The input voltage ranges from 5 to 18 V, while a 2 A load current can be obtained. Project supported by the National Natural Science Foundation of China (No. 41274047), the Natural Science Foundation of Jiangsu Province (No. BK2012639), the Science and Technology Enterprises in Jiangsu Province Technology Innovation Fund (No. BC2012121), and the Changzhou Science and Technology Support (Industrial) Project (No. CE20120074).

  19. INDEXING AND INDEX FUNDS

    Directory of Open Access Journals (Sweden)

    HAKAN SARITAŞ

    2013-06-01

    Full Text Available Proponents of the efficient market hypothesis believe that active portfolio management is largely wasted effort and unlikely to justify the expenses incurred. Therefore, they advocate a passive investment strategy that makes no attempt to outsmart the market. One common strategy for passive management is indexing where a fund is designed to replicate the performance of a broad-based index of stocks and bonds. Traditionally, indexing was used by institutional investors, but today, the use of index funds proliferated among individual investors. Over the years, both international and domestic index funds have disproportionately outperformed the market more than the actively managed funds have.

  20. Periodic Table of Students.

    Science.gov (United States)

    Johnson, Mike

    1998-01-01

    Presents an exercise in which an eighth-grade science teacher decorated the classroom with a periodic table of students. Student photographs were arranged according to similarities into vertical columns. Students were each assigned an atomic number according to their placement in the table. The table is then used to teach students about…

  1. Periodic Table of Students.

    Science.gov (United States)

    Johnson, Mike

    1998-01-01

    Presents an exercise in which an eighth-grade science teacher decorated the classroom with a periodic table of students. Student photographs were arranged according to similarities into vertical columns. Students were each assigned an atomic number according to their placement in the table. The table is then used to teach students about…

  2. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2013-01-01

    Apparently table tennis plays an important role in physics, not so much because physicists are interested in the theory of table tennis ball scattering, but probably because it provides useful breaks from their deep intellectual occupation. It seems that many of the greatest physicists took table tennis very seriously. For instance, Heisenberg could not even bear to lose a game of table tennis, Otto Frisch played a lot of table tennis, and had a table set up in his library, and Niels Bohr apparently beat everybody at table tennis. Therefore, as the CERN Table Tennis Club advertises on a poster for the next CERN Table Tennis Tournament: “if you want to be a great physicist, perhaps you should play table tennis”. Outdoor table at restaurant n° 1 For this reason, and also as part of the campaign launched by the CERN medical service “Move! & Eat better”, to encourage everyone at CERN to take regular exercise, the CERN Table Tennis Club, with the supp...

  3. CERN Table Tennis Club

    CERN Multimedia

    CERN Table Tennis Club

    2014-01-01

    CERN Table Tennis Club Announcing CERN 60th Anniversary Table Tennis Tournament to take place at CERN, from July 1 to July 15, 2014   The CERN Table Tennis Club, reborn in 2008, is encouraging people at CERN to take more regular exercise. This is why the Club, thanks to the strong support of the CERN Staff Association, installed last season a first outdoor table on the terrace of restaurant # 1, and will install another one this season on the terrace of Restaurant # 2. Table tennis provides both physical exercise and friendly social interactions. The CERN Table Tennis club is happy to use the unique opportunity of the 60th CERN anniversary to promote table tennis at CERN, as it is a game that everybody can easily play, regardless of level. Table tennis is particularly well suited for CERN, as many great physicists play table tennis, as you might already know: “Heisenberg could not even bear to lose a game of table tennis”; “Otto Frisch played a lot of table tennis;...

  4. Mortality table construction

    Science.gov (United States)

    Sutawanir

    2015-12-01

    Mortality tables play important role in actuarial studies such as life annuities, premium determination, premium reserve, valuation pension plan, pension funding. Some known mortality tables are CSO mortality table, Indonesian Mortality Table, Bowers mortality table, Japan Mortality table. For actuary applications some tables are constructed with different environment such as single decrement, double decrement, and multiple decrement. There exist two approaches in mortality table construction : mathematics approach and statistical approach. Distribution model and estimation theory are the statistical concepts that are used in mortality table construction. This article aims to discuss the statistical approach in mortality table construction. The distributional assumptions are uniform death distribution (UDD) and constant force (exponential). Moment estimation and maximum likelihood are used to estimate the mortality parameter. Moment estimation methods are easier to manipulate compared to maximum likelihood estimation (mle). However, the complete mortality data are not used in moment estimation method. Maximum likelihood exploited all available information in mortality estimation. Some mle equations are complicated and solved using numerical methods. The article focus on single decrement estimation using moment and maximum likelihood estimation. Some extension to double decrement will introduced. Simple dataset will be used to illustrated the mortality estimation, and mortality table.

  5. High accuracy microwave frequency measurement based on single-drive dual-parallel Mach-Zehnder modulator

    DEFF Research Database (Denmark)

    Zhao, Ying; Pang, Xiaodan; Deng, Lei

    2011-01-01

    A novel approach for broadband microwave frequency measurement by employing a single-drive dual-parallel Mach-Zehnder modulator is proposed and experimentally demonstrated. Based on bias manipulations of the modulator, conventional frequency-to-power mapping technique is developed by performing a...... 10−3 relative error. This high accuracy frequency measurement technique is a promising candidate for high-speed electronic warfare and defense applications.......A novel approach for broadband microwave frequency measurement by employing a single-drive dual-parallel Mach-Zehnder modulator is proposed and experimentally demonstrated. Based on bias manipulations of the modulator, conventional frequency-to-power mapping technique is developed by performing...... a two-stage frequency measurement cooperating with digital signal processing. In the experiment, 10GHz measurement range is guaranteed and the average uncertainty of estimated microwave frequency is 5.4MHz, which verifies the measurement accuracy is significantly improved by achieving an unprecedented...

  6. Swing arm profilometer: high accuracy testing for large reaction-bonded silicon carbide optics with a capacitive probe

    Science.gov (United States)

    Xiong, Ling; Luo, Xiao; Hu, Hai-xiang; Zhang, Zhi-yu; Zhang, Feng; Zheng, Li-gong; Zhang, Xue-jun

    2017-08-01

    A feasible way to improve the manufacturing efficiency of large reaction-bonded silicon carbide optics is to increase the processing accuracy in the ground stage before polishing, which requires high accuracy metrology. A swing arm profilometer (SAP) has been used to measure large optics during the ground stage. A method has been developed for improving the measurement accuracy of SAP using a capacitive probe and implementing calibrations. The experimental result compared with the interferometer test shows the accuracy of 0.068 μm in root-mean-square (RMS) and maps in 37 low-order Zernike terms show accuracy of 0.048 μm RMS, which shows a powerful capability to provide a major input in high-precision grinding.

  7. Static Calibration and Analysis of the Velodyne HDL-64E S2 for High Accuracy Mobile Scanning

    Directory of Open Access Journals (Sweden)

    Craig Glennie

    2010-06-01

    Full Text Available The static calibration and analysis of the Velodyne HDL-64E S2 scanning LiDAR system is presented and analyzed. The mathematical model for measurements for the HDL-64E S2 scanner is derived and discussed. A planar feature based least squares adjustment approach is presented and utilized in a minimally constrained network in order to derive an optimal solution for the laser’s internal calibration parameters. Finally, the results of the adjustment along with a detailed examination of the adjustment residuals are given. A three-fold improvement in the planar misclosure residual RMSE over the standard factory calibration model was achieved by the proposed calibration. Results also suggest that there may still be some unmodelled distortions in the range measurements from the scanner. However, despite this, the overall precision of the adjusted laser scanner data appears to make it a viable choice for high accuracy mobile scanning applications.

  8. High-accuracy measurements of snow Bidirectional Reflectance Distribution Function at visible and NIR wavelengths – comparison with modelling results

    Directory of Open Access Journals (Sweden)

    Y. Arnaud

    2009-09-01

    Full Text Available High-accuracy measurements of snow Bidirectional Reflectance Distribution Function (BRDF were performed for four natural snow samples with a spectrogonio-radiometer in the 500–2600 nm wavelength range. These measurements are one of the first set of direct snow BRDF values over a wide range of lighting and viewing geometry. They were compared to BRDF calculated with two optical models. Variations of the snow anisotropy factor with lighting geometry, wavelength and snow physical properties were investigated. Results show that at wavelengths with small penetration depth, scattering mainly occurs in the very top layers and the anisotropy factor is controlled by the phase function. In this condition, forward scattering peak or double scattering peak is observed. In constrast at shorter wavelengths, the penetration of the radiation is much deeper and the number of scattering events increases. The anisotropy factor is thus nearly constant and decreases at grazing observation angles.

  9. High-accuracy measurements of snow Bidirectional Reflectance Distribution Function at visible and NIR wavelengths - comparison with modelling results

    Science.gov (United States)

    Dumont, M.; Brissaud, O.; Picard, G.; Schmitt, B.; Gallet, J.-C.; Arnaud, Y.

    2010-03-01

    High-accuracy measurements of snow Bidirectional Reflectance Distribution Function (BRDF) were performed for four natural snow samples with a spectrogonio-radiometer in the 500-2600 nm wavelength range. These measurements are one of the first sets of direct snow BRDF values over a wide range of lighting and viewing geometry. They were compared to BRDF calculated with two optical models. Variations of the snow anisotropy factor with lighting geometry, wavelength and snow physical properties were investigated. Results show that at wavelengths with small penetration depth, scattering mainly occurs in the very top layers and the anisotropy factor is controlled by the phase function. In this condition, forward scattering peak or double scattering peak is observed. In contrast at shorter wavelengths, the penetration of the radiation is much deeper and the number of scattering events increases. The anisotropy factor is thus nearly constant and decreases at grazing observation angles. The whole dataset is available on demand from the corresponding author.

  10. High-accuracy CFD prediction methods for fluid and structure temperature fluctuations at T-junction for thermal fatigue evaluation

    Energy Technology Data Exchange (ETDEWEB)

    Qian, Shaoxiang, E-mail: qian.shaoxiang@jgc.com [EN Technology Center, Process Technology Division, JGC Corporation, 2-3-1 Minato Mirai, Nishi-ku, Yokohama 220-6001 (Japan); Kanamaru, Shinichiro [EN Technology Center, Process Technology Division, JGC Corporation, 2-3-1 Minato Mirai, Nishi-ku, Yokohama 220-6001 (Japan); Kasahara, Naoto [Nuclear Engineering and Management, School of Engineering, The University of Tokyo, 7-3-1 Hongo, Bunkyo-ku, Tokyo 113-8656 (Japan)

    2015-07-15

    Highlights: • Numerical methods for accurate prediction of thermal loading were proposed. • Predicted fluid temperature fluctuation (FTF) intensity is close to the experiment. • Predicted structure temperature fluctuation (STF) range is close to the experiment. • Predicted peak frequencies of FTF and STF also agree well with the experiment. • CFD results show the proposed numerical methods are of sufficiently high accuracy. - Abstract: Temperature fluctuations generated by the mixing of hot and cold fluids at a T-junction, which is widely used in nuclear power and process plants, can cause thermal fatigue failure. The conventional methods for evaluating thermal fatigue tend to provide insufficient accuracy, because they were developed based on limited experimental data and a simplified one-dimensional finite element analysis (FEA). CFD/FEA coupling analysis is expected as a useful tool for the more accurate evaluation of thermal fatigue. The present paper aims to verify the accuracy of proposed numerical methods of simulating fluid and structure temperature fluctuations at a T-junction for thermal fatigue evaluation. The dynamic Smagorinsky model (DSM) is used for large eddy simulation (LES) sub-grid scale (SGS) turbulence model, and a hybrid scheme (HS) is adopted for the calculation of convective terms in the governing equations. Also, heat transfer between fluid and structure is calculated directly through thermal conduction by creating a mesh with near wall resolution (NWR) by allocating grid points within the thermal boundary sub-layer. The simulation results show that the distribution of fluid temperature fluctuation intensity and the range of structure temperature fluctuation are remarkably close to the experimental results. Moreover, the peak frequencies of power spectrum density (PSD) of both fluid and structure temperature fluctuations also agree well with the experimental results. Therefore, the numerical methods used in the present paper are

  11. The use of low density high accuracy (LDHA) data for correction of high density low accuracy (HDLA) point cloud

    Science.gov (United States)

    Rak, Michal Bartosz; Wozniak, Adam; Mayer, J. R. R.

    2016-06-01

    Coordinate measuring techniques rely on computer processing of coordinate values of points gathered from physical surfaces using contact or non-contact methods. Contact measurements are characterized by low density and high accuracy. On the other hand optical methods gather high density data of the whole object in a short time but with accuracy at least one order of magnitude lower than for contact measurements. Thus the drawback of contact methods is low density of data, while for non-contact methods it is low accuracy. In this paper a method for fusion of data from two measurements of fundamentally different nature: high density low accuracy (HDLA) and low density high accuracy (LDHA) is presented to overcome the limitations of both measuring methods. In the proposed method the concept of virtual markers is used to find a representation of pairs of corresponding characteristic points in both sets of data. In each pair the coordinates of the point from contact measurements is treated as a reference for the corresponding point from non-contact measurement. Transformation enabling displacement of characteristic points from optical measurement to their match from contact measurements is determined and applied to the whole point cloud. The efficiency of the proposed algorithm was evaluated by comparison with data from a coordinate measuring machine (CMM). Three surfaces were used for this evaluation: plane, turbine blade and engine cover. For the planar surface the achieved improvement was of around 200 μm. Similar results were obtained for the turbine blade but for the engine cover the improvement was smaller. For both freeform surfaces the improvement was higher for raw data than for data after creation of mesh of triangles.

  12. TABLE TENNIS CLUB

    CERN Multimedia

    TABLE TENNIS CLUB

    2010-01-01

    2010 CERN Table Tennis Tournament The CERN Table Tennis Club organizes its traditional CERN Table Tennis Tournament, at the Meyrin club, 2 rue de livron, in Meyrin, Saturday August 21st, in the afternoon. The tournament is open to all CERN staff, users, visitors and families, including of course summer students. See below for details. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You can also download the registration form from the Club Web page (http://www.cern.ch/tabletennis), and send it via internal mail. Photo taken on August 22, 2009 showing some of the participants in the 2nd CERN Table Tennis tournament. INFORMATION ON CERN TABLE TENNIS CLUB CERN used to have a tradition of table tennis activities at CERN. For some reason, at the beginning of the 1980’s, the CERN Table Tennis club merged with the Meyrin Table Tennis club, a member of the Association Genevoise de Tennis de Table (AGTT). Therefore, if you want to practice table tennis, you...

  13. Standard Reference Tables -

    Data.gov (United States)

    Department of Transportation — The Standard Reference Tables (SRT) provide consistent reference data for the various applications that support Flight Standards Service (AFS) business processes and...

  14. The Living Periodic Table

    Science.gov (United States)

    Nahlik, Mary Schrodt

    2005-01-01

    To help make the abstract world of chemistry more concrete eighth-grade students, the author has them create a living periodic table that can be displayed in the classroom or hallway. This display includes information about the elements arranged in the traditional periodic table format, but also includes visual real-world representations of the…

  15. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2011-01-01

    CERN Table Tennis Tournament Saturday 20th August 2011 at 13.30 at the CERN/Meyrin TT club (underneath the Piscine de Livron, rue de Livron 2, 1217 Meyrin) Details: http://cern.ch/club-TableTennis Registration: jean-pierre.revol@cern.ch Open to all CERN staff, visitors, summer students, and families

  16. The Living Periodic Table

    Science.gov (United States)

    Nahlik, Mary Schrodt

    2005-01-01

    To help make the abstract world of chemistry more concrete eighth-grade students, the author has them create a living periodic table that can be displayed in the classroom or hallway. This display includes information about the elements arranged in the traditional periodic table format, but also includes visual real-world representations of the…

  17. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2011-01-01

    CERN Table Tennis Tournament Saturday 20th August 2011 at 13.30 at the CERN/Meyrin TT club (underneath the Piscine de Livron, rue de Livron 2, 1217 Meyrin) Details: http://cern.ch/club-TableTennis Registration: jean-pierre.revol@cern.ch Open to all CERN staff, visitors, summer students, and families

  18. A three axis turntable's online initial state measurement method based on the high-accuracy laser gyro SINS

    Science.gov (United States)

    Gao, Chunfeng; Wei, Guo; Wang, Qi; Xiong, Zhenyu; Wang, Qun; Long, Xingwu

    2016-10-01

    As an indispensable equipment in inertial technology tests, the three-axis turntable is widely used in the calibration of various types inertial navigation systems (INS). In order to ensure the calibration accuracy of INS, we need to accurately measure the initial state of the turntable. However, the traditional measuring method needs a lot of exterior equipment (such as level instrument, north seeker, autocollimator, etc.), and the test processing is complex, low efficiency. Therefore, it is relatively difficult for the inertial measurement equipment manufacturers to realize the self-inspection of the turntable. Owing to the high precision attitude information provided by the laser gyro strapdown inertial navigation system (SINS) after fine alignment, we can use it as the attitude reference of initial state measurement of three-axis turntable. For the principle that the fixed rotation vector increment is not affected by measuring point, we use the laser gyro INS and the encoder of the turntable to provide the attitudes of turntable mounting plat. Through this way, the high accuracy measurement of perpendicularity error and initial attitude of the three-axis turntable has been achieved.

  19. Design and calibration of a high-sensitivity and high-accuracy polarimeter based on liquid crystal variable retarders

    Science.gov (United States)

    Guo, Jing; Ren, De-Qing; Liu, Cheng-Chao; Zhu, Yong-Tian; Dou, Jiang-Pei; Zhang, Xi; Beck, Christian

    2017-01-01

    Polarimetry plays an important role in the measurement of solar magnetic fields. We developed a high-sensitivity and high-accuracy polarimeter (HHP) based on nematic liquid crystal variable retarders (LCVRs), which has a compact setup and no mechanical moving parts. The system design and calibration methods are discussed in detail. The azimuth error of the transmission axis of the polarizer as well as the fast axes of the two LCVRs and the quarter-wave plate were determined using dedicated procedures. Linearly and circularly polarized light were employed to evaluate the performance of the HHP. The experimental results indicate that a polarimetric sensitivity of better than \\[5.7 × {10 - 3}\\] can be achieved by using a single short-exposure image, while an accuracy on the order of 10‑5 can be reached by using a large number of short-exposure images. This makes the HHP a high-performance system that can be used with a ground-based solar telescope for high-precision solar magnetic field investigations.

  20. High-accuracy approximation of high-rank derivatives: isotropic finite differences based on lattice-Boltzmann stencils.

    Science.gov (United States)

    Mattila, Keijo Kalervo; Hegele Júnior, Luiz Adolfo; Philippi, Paulo Cesar

    2014-01-01

    We propose isotropic finite differences for high-accuracy approximation of high-rank derivatives. These finite differences are based on direct application of lattice-Boltzmann stencils. The presented finite-difference expressions are valid in any dimension, particularly in two and three dimensions, and any lattice-Boltzmann stencil isotropic enough can be utilized. A theoretical basis for the proposed utilization of lattice-Boltzmann stencils in the approximation of high-rank derivatives is established. In particular, the isotropy and accuracy properties of the proposed approximations are derived directly from this basis. Furthermore, in this formal development, we extend the theory of Hermite polynomial tensors in the case of discrete spaces and present expressions for the discrete inner products between monomials and Hermite polynomial tensors. In addition, we prove an equivalency between two approaches for constructing lattice-Boltzmann stencils. For the numerical verification of the presented finite differences, we introduce 5th-, 6th-, and 8th-order two-dimensional lattice-Boltzmann stencils.

  1. Novel technique to suppress hydrocarbon contamination for high accuracy determination of carbon content in steel by FE-EPMA

    Science.gov (United States)

    Yamashita, Takako; Tanaka, Yuji; Yagoshi, Masayasu; Ishida, Kiyohito

    2016-07-01

    In multiphase steels, control of the carbon contents in the respective phases is the most important factor in alloy design for achieving high strength and high ductility. However, it is unusually difficult to determine the carbon contents in multiphase structures with high accuracy by electron probe microanalysis (EPMA) due to the unavoidable effect of hydrocarbon contamination during measurements. We have investigated new methods for suppressing hydrocarbon contamination during field emission (FE) EPMA measurements as well as a conventional liquid nitrogen trap. Plasma cleaner inside the specimen chamber results in a improvement of carbon-content determination by point analysis, increasing precision tenfold from the previous 0.1 mass%C to 0.01 mass%C. Stage heating at about 100 °C dramatically suppresses contamination growth during continuous point measurement and mapping. By the combination of above two techniques, we successfully visualized the two-dimensional carbon distribution in a dual-phase steel. It was also noted that the carbon concentrations at the ferrite/martensite interfaces were not the same across all interfaces, and local variation was observed. The developed technique is expected to be a powerful tool for understanding the mechanisms of mechanical properties and microstructural evolution, thereby contributing to the design of new steel products with superior properties.

  2. High-accuracy diagnostic tool for electron cloud observation in the LHC based on synchronous phase measurements

    Science.gov (United States)

    Esteban Müller, J. F.; Baudrenghien, P.; Mastoridis, T.; Shaposhnikova, E.; Valuch, D.

    2015-11-01

    Electron cloud effects, which include heat load in the cryogenic system, pressure rise, and beam instabilities, are among the main intensity limitations for the LHC operation with 25 ns spaced bunches. A new observation tool was proposed and developed to monitor the e-cloud activity and it has already been used successfully during the LHC run 1 (2010-2012) and it is being intensively used in operation during the start of the LHC run 2 (2015-2018). It is based on the fact that the power loss of each bunch due to e-cloud can be estimated using bunch-by-bunch measurement of the synchronous phase. The measurements were done using the existing beam phase module of the low-level rf control system. In order to achieve the very high accuracy required, corrections for reflection in the cables and for systematic errors need to be applied followed by a post-processing of the measurements. Results clearly show the e-cloud buildup along the bunch trains and its time evolution during each LHC fill as well as from fill to fill. Measurements during the 2012 LHC scrubbing run reveal a progressive reduction in the e-cloud activity and therefore a decrease in the secondary electron yield. The total beam power loss can be computed as a sum of the contributions from all bunches and compared with the heat load deposited in the cryogenic system.

  3. High Accuracy Potential Energy Surface, Dipole Moment Surface, Rovibrational Energies and Line List Calculations for ^{14}NH_3

    Science.gov (United States)

    Coles, Phillip; Yurchenko, Sergei N.; Polyansky, Oleg; Kyuberis, Aleksandra; Ovsyannikov, Roman I.; Zobov, Nikolay Fedorovich; Tennyson, Jonathan

    2017-06-01

    We present a new spectroscopic potential energy surface (PES) for ^{14}NH_3, produced by refining a high accuracy ab initio PES to experimental energy levels taken predominantly from MARVEL. The PES reproduces 1722 matched J=0-8 experimental energies with a root-mean-square error of 0.035 cm-1 under 6000 cm^{-1} and 0.059 under 7200 cm^{-1}. In conjunction with a new DMS calculated using multi reference configuration interaction (MRCI) and H=aug-cc-pVQZ, N=aug-cc-pWCVQZ basis sets, an infrared (IR) line list has been computed which is suitable for use up to 2000 K. The line list is used to assign experimental lines in the 7500 - 10,500 cm^{-1} region and previously unassigned lines in HITRAN in the 6000-7000 cm^{-1} region. Oleg L. Polyansky, Roman I. Ovsyannikov, Aleksandra A. Kyuberis, Lorenzo Lodi, Jonathan Tennyson, Andrey Yachmenev, Sergei N. Yurchenko, Nikolai F. Zobov, J. Mol. Spec., 327 (2016) 21-30 Afaf R. Al Derzia, Tibor Furtenbacher, Jonathan Tennyson, Sergei N. Yurchenko, Attila G. Császár, J. Quant. Spectrosc. Rad. Trans., 161 (2015) 117-130

  4. Novel technique to suppress hydrocarbon contamination for high accuracy determination of carbon content in steel by FE-EPMA.

    Science.gov (United States)

    Yamashita, Takako; Tanaka, Yuji; Yagoshi, Masayasu; Ishida, Kiyohito

    2016-07-19

    In multiphase steels, control of the carbon contents in the respective phases is the most important factor in alloy design for achieving high strength and high ductility. However, it is unusually difficult to determine the carbon contents in multiphase structures with high accuracy by electron probe microanalysis (EPMA) due to the unavoidable effect of hydrocarbon contamination during measurements. We have investigated new methods for suppressing hydrocarbon contamination during field emission (FE) EPMA measurements as well as a conventional liquid nitrogen trap. Plasma cleaner inside the specimen chamber results in a improvement of carbon-content determination by point analysis, increasing precision tenfold from the previous 0.1 mass%C to 0.01 mass%C. Stage heating at about 100 °C dramatically suppresses contamination growth during continuous point measurement and mapping. By the combination of above two techniques, we successfully visualized the two-dimensional carbon distribution in a dual-phase steel. It was also noted that the carbon concentrations at the ferrite/martensite interfaces were not the same across all interfaces, and local variation was observed. The developed technique is expected to be a powerful tool for understanding the mechanisms of mechanical properties and microstructural evolution, thereby contributing to the design of new steel products with superior properties.

  5. High-accuracy measurement of ship velocities by DGPS; DGPS ni yoru sensoku keisoku no koseidoka ni tsuite

    Energy Technology Data Exchange (ETDEWEB)

    Yamaguchi, S.; Koterayama, W. [Kyushu Univ., Fukuoka (Japan). Research Inst. for Applied Mechanics

    1996-04-10

    The differential global positioning system (DGPS) can eliminate most of errors in ship velocity measurement by GPS positioning alone. Through two rounds of marine observations by towing an observation robot in summer 1995, the authors attempted high-accuracy measurement of ship velocities by DGPS, and also carried out both positioning by GPS alone and measurement using the bottom track of ADCP (acoustic Doppler current profiler). In this paper, the results obtained by these measurement methods were examined through comparison among them, and the accuracy of the measured ship velocities was considered. In DGPS measurement, both translocation method and interference positioning method were used. ADCP mounted on the observation robot allowed measurement of the velocity of current meter itself by its bottom track in shallow sea areas less than 350m. As the result of these marine observations, it was confirmed that the accuracy equivalent to that of direct measurement by bottom track is possible to be obtained by DGPS. 3 refs., 5 figs., 1 tab.

  6. High-accuracy current generation in the nanoampere regime from a silicon single-trap electron pump

    Science.gov (United States)

    Yamahata, Gento; Giblin, Stephen P.; Kataoka, Masaya; Karasawa, Takeshi; Fujiwara, Akira

    2017-01-01

    A gigahertz single-electron (SE) pump with a semiconductor charge island is promising for a future quantum current standard. However, high-accuracy current in the nanoampere regime is still difficult to achieve because the performance of SE pumps tends to degrade significantly at frequencies exceeding 1 GHz. Here, we demonstrate robust SE pumping via a single-trap level in silicon up to 7.4 GHz, at which the pumping current exceeds 1 nA. An accuracy test with an uncertainty of about one part per million (ppm) reveals that the pumping current deviates from the ideal value by only about 20 ppm at the flattest part of the current plateau. This value is two orders of magnitude better than the best one reported in the nanoampere regime. In addition, the pumping accuracy is almost unchanged up to 7.4 GHz, probably due to strong electron confinement in the trap. These results indicate that trap-mediated SE pumping is promising for achieving the practical operation of the quantum current standard. PMID:28322339

  7. High-accuracy measurements of snow Bidirectional Reflectance Distribution Function at visible and NIR wavelengths – comparison with modelling results

    Directory of Open Access Journals (Sweden)

    M. Dumont

    2010-03-01

    Full Text Available High-accuracy measurements of snow Bidirectional Reflectance Distribution Function (BRDF were performed for four natural snow samples with a spectrogonio-radiometer in the 500–2600 nm wavelength range. These measurements are one of the first sets of direct snow BRDF values over a wide range of lighting and viewing geometry. They were compared to BRDF calculated with two optical models. Variations of the snow anisotropy factor with lighting geometry, wavelength and snow physical properties were investigated. Results show that at wavelengths with small penetration depth, scattering mainly occurs in the very top layers and the anisotropy factor is controlled by the phase function. In this condition, forward scattering peak or double scattering peak is observed. In contrast at shorter wavelengths, the penetration of the radiation is much deeper and the number of scattering events increases. The anisotropy factor is thus nearly constant and decreases at grazing observation angles. The whole dataset is available on demand from the corresponding author.

  8. The LLNL High Accuracy Volume Renderer for Unstructured Data: Capabilities, Current Limits, and Potential for ASCI/VIEWS Deployment

    Energy Technology Data Exchange (ETDEWEB)

    Williams, P L; Max, N L

    2001-06-04

    This report describes a volume rendering system for unstructured data, especially finite element data, that creates images with very high accuracy. The system will currently handle meshes whose cells are either linear or quadratic tetrahedra, or meshes with mixed cell types: tetrahedra, bricks, prisms, and pyramids. The cells may have nonplanar facets. Whenever possible, exact mathematical solutions for the radiance integrals and for interpolation are used. Accurate semitransparent shaded isosurfaces may be embedded in the volume rendering. For very small cells, subpixel accumulation by splatting is used to avoid sampling error. A new exact and efficient visibility ordering algorithm is described. The most accurate images are generated in software, however, more efficient algorithms utilizing graphics hardware may also be selected. The report describes the parallelization of the system for a distributed-shared memory multiprocessor machine, and concludes by discussing the system's limits, desirable future work, and ways to extend the system so as to be compatible with projected ASCI/VIEWS architectures.

  9. Anti-aliasing filters for deriving high-accuracy DEMs from TLS data: A case study from Freeport, Texas

    Science.gov (United States)

    Xiong, Lin.; Wang, Guoquan; Wessel, Paul

    2017-03-01

    Terrestrial laser scanning (TLS), also known as ground-based Light Detection and Ranging (LiDAR), has been frequently applied to build bare-earth digital elevation models (DEMs) for high-accuracy geomorphology studies. The point clouds acquired from TLS often achieve a spatial resolution at fingerprint (e.g., 3 cm×3 cm) to handprint (e.g., 10 cm×10 cm) level. A downsampling process has to be applied to decimate the massive point clouds and obtain manageable DEMs. It is well known that downsampling can result in aliasing that causes different signal components to become indistinguishable when the signal is reconstructed from the datasets with a lower sampling rate. Conventional DEMs are mainly the results of upsampling of sparse elevation measurements from land surveying, satellite remote sensing, and aerial photography. As a consequence, the effects of aliasing caused by downsampling have not been fully investigated in the open literature of DEMs. This study aims to investigate the spatial aliasing problem of regridding dense TLS data. The TLS data collected from the beach and dune area near Freeport, Texas in the summer of 2015 are used for this study. The core idea of the anti-aliasing procedure is to apply a low-pass spatial filter prior to conducting downsampling. This article describes the successful use of a fourth-order Butterworth low-pass spatial filter employed in the Generic Mapping Tools (GMT) software package as an anti-aliasing filter. The filter can be applied as an isotropic filter with a single cutoff wavelength or as an anisotropic filter with two different cutoff wavelengths in the X and Y directions. The cutoff wavelength for the isotropic filter is recommended to be three times the grid size of the target DEM.

  10. Eruptions of the last 2200 years at Vulcano and Vulcanello (Aeolian Islands, Italy) dated by high-accuracy archeomagnetism

    Science.gov (United States)

    Arrighi, Simone; Tanguy, Jean-Claude; Rosi, Mauro

    2006-12-01

    The recent eruptive history of the Vulcano island (Southern Italy) was investigated through the high-accuracy "large sample" archeomagnetic method (Tanguy, J.C., Le Goff, M., Principe, C., Arrighi, S., Chillemi, V., Paiotti, A., La Delfa, S., Patanè, G., 2003. Archeomagnetic dating of Mediterranean volcanics of the last 2100 years: validity and limits. Earth Planet. Sci. Lett. 211, 111-124; Tanguy, J.C., Principe, C., Arrighi, S., 2005. Comment on "Historical measurements of the Earth's magnetic field compared with remanence directions from lava flows in Italy over the last four centuries" by R. Lanza, A. Meloni, and E. Tema. Phys. Earth Planet. Interiors 152, 116-120; Arrighi, S., 2004. The large sample archeomagnetic method applied to Neapolitan volcanoes and Aeolian Islands. PhD Thesis. University of Pisa, Italy, pp. 1-186). Age determination is based upon directional geomagnetic variation reconstructed from historically dated lavas in Southern Italy, and from archeological sites in Western Europe (Gallet, Y., Genevey, A., Le Goff, M., 2002. Three millennia of directional variation of the Earth's magnetic field in Western Europe as revealed by archeological artefacts. Phys. Earth Planet. Interiors 131, 81-89) relocated to Sicily. Results in the present paper were obtained on 12 sites including 185 samples weighing 0.5-1 kg, distributed over the Vulcanello platform lavas and pyroclastic cones, and on the lava flows from the Fossa cone. It is shown that the Vulcanello platform was built by nearly continuous activity between AD 1000 and 1250, which is more than a millennium younger than believed until now from questionable interpretation of imprecise historical accounts. Most of the lavas from the Fossa cone, whose ages were rather hypothetical or known with a large uncertainty, have erupted within the same period. However, the last "Pietre Cotte" obsidian flow is confirmed to date from 1720 ± 30, in agreement with historical data (1739).

  11. Decision table languages and systems

    CERN Document Server

    Metzner, John R

    1977-01-01

    ACM Monograph Series: Decision Table Languages and Systems focuses on linguistic examination of decision tables and survey of the features of existing decision table languages and systems. The book first offers information on semiotics, programming language features, and generalization. Discussions focus on semantic broadening, outer language enrichments, generalization of syntax, limitations, implementation improvements, syntactic and semantic features, decision table syntax, semantics of decision table languages, and decision table programming languages. The text then elaborates on design im

  12. Elementary Statistics Tables

    CERN Document Server

    Neave, Henry R

    2012-01-01

    This book, designed for students taking a basic introductory course in statistical analysis, is far more than just a book of tables. Each table is accompanied by a careful but concise explanation and useful worked examples. Requiring little mathematical background, Elementary Statistics Tables is thus not just a reference book but a positive and user-friendly teaching and learning aid. The new edition contains a new and comprehensive "teach-yourself" section on a simple but powerful approach, now well-known in parts of industry but less so in academia, to analysing and interpreting process dat

  13. Setting the Periodic Table.

    Science.gov (United States)

    Saturnelli, Annette

    1985-01-01

    Examines problems resulting from different forms of the periodic table, indicating that New York State schools use a form reflecting the International Union of Pure and Applied Chemistry's 1984 recommendations. Other formats used and reasons for standardization are discussed. (DH)

  14. The Periodic Table CD.

    Science.gov (United States)

    Banks, Alton J.; Holmes, Jon L.

    1995-01-01

    Describes the characteristics of the digitized version of The Periodic Table Videodisc. Provides details about the organization of information and access to the data via Macintosh and Windows computers. (DDR)

  15. VMS forms Output Tables

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These output tables contain parsed and format validated data from the various VMS forms that are sent from any given vessel, while at sea, from the VMS devices on...

  16. Setting the Periodic Table.

    Science.gov (United States)

    Saturnelli, Annette

    1985-01-01

    Examines problems resulting from different forms of the periodic table, indicating that New York State schools use a form reflecting the International Union of Pure and Applied Chemistry's 1984 recommendations. Other formats used and reasons for standardization are discussed. (DH)

  17. The Periodic Table CD.

    Science.gov (United States)

    Banks, Alton J.; Holmes, Jon L.

    1995-01-01

    Describes the characteristics of the digitized version of The Periodic Table Videodisc. Provides details about the organization of information and access to the data via Macintosh and Windows computers. (DDR)

  18. Permit.LOA table

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This table includes the effective dates by vessel and permit number for each issued letter of authorization (LOA) by the Permit Office (APSD)

  19. Estimating subsurface water volumes and transit times in Hokkaido river catchments, Japan, using high-accuracy tritium analysis

    Science.gov (United States)

    Gusyev, Maksym; Yamazaki, Yusuke; Morgenstern, Uwe; Stewart, Mike; Kashiwaya, Kazuhisa; Hirai, Yasuyuki; Kuribayashi, Daisuke; Sawano, Hisaya

    2015-04-01

    The goal of this study is to estimate subsurface water transit times and volumes in headwater catchments of Hokkaido, Japan, using the New Zealand high-accuracy tritium analysis technique. Transit time provides insights into the subsurface water storage and therefore provides a robust and quick approach to quantifying the subsurface groundwater volume. Our method is based on tritium measurements in river water. Tritium is a component of meteoric water, decays with a half-life of 12.32 years, and is inert in the subsurface after the water enters the groundwater system. Therefore, tritium is ideally suited for characterization of the catchment's responses and can provide information on mean water transit times up to 200 years. Only in recent years has it become possible to use tritium for dating of stream and river water, due to the fading impact of the bomb-tritium from thermo-nuclear weapons testing, and due to improved measurement accuracy for the extremely low natural tritium concentrations. Transit time of the water discharge is one of the most crucial parameters for understanding the response of catchments and estimating subsurface water volume. While many tritium transit time studies have been conducted in New Zealand, only a limited number of tritium studies have been conducted in Japan. In addition, the meteorological, orographic and geological conditions of Hokkaido Island are similar to those in parts of New Zealand, allowing for comparison between these regions. In 2014, three field trips were conducted in Hokkaido in June, July and October to sample river water at river gauging stations operated by the Ministry of Land, Infrastructure, Transport and Tourism (MLIT). These stations have altitudes between 36 m and 860 m MSL and drainage areas between 45 and 377 km2. Each sampled point is located upstream of MLIT dams, with hourly measurements of precipitation and river water levels enabling us to distinguish between the snow melt and baseflow contributions

  20. Are Partin tables suitable for Chinese patients with prostate cancer?

    Institute of Scientific and Technical Information of China (English)

    SHEN Xiao-cao; QIU Yi-qing; ZHENG Yi-chun; ZHANG Su-zhan

    2012-01-01

    Background Recently,the number of patients with prostate cancer who needed to be treated with radical prostatectomy increased rapidly in China.There is still a difference between clinical staging and the post-operative final pathologic staging; hence,an excellent tool for accurately predicting the pathologic stages of prostate cancer is needed urgently in clinical practice.The Partin tables are the most popular and widely used tool for predicting the pathologic stages of prostate cancer because of its high accuracy and ease of implementation.The aim of this study was to externally validate the accuracy of the three versions of the Partin tables in predicting the post-operative pathologic stages in Chinese patients with prostate cancer.Methods We retrospectively analyzed the data from 203 patients with prostate cancer who underwent radical prostatectomies between June 2000 and May 2012.The accuracies of the three versions of the Partin tables in predicting the post-operative pathologic stages in Chinese patients with prostate cancer were evaluated using the area under the receiver operating characteristic curve (AUC).Results Using the 1997,2001,and 2007 Partin tables for predicting the current cases,the AUC of organ confinement (OC) was 0.877,0.788,and 0.726; the AUC of extracapsular extension (ECE) was 0.525,0.615,and 0.608; the AUC of seminal vesicle invasion (SVI) was 0.875,0.649,and 0.820; and the AUC of pelvic lymph node invasion (LNI) was 0.808,0.758,and 0.735 respectively.Conclusions The accuracies of the three versions of Partin tables in predicting OC,SVI,and LNI were good,especially the 2001 Partin table for SVI.In contrast,the accuracy of the three versions of the Partin tables in predicting ECE was fair.The 1997 Partin table was much better than the 2007 table in predicting OC,and the 2001 table in predicting SVI.The 2007 Partin table did not show any advantages.

  1. Strategy for high-accuracy-and-precision retrieval of atmospheric methane from the mid-infrared FTIR network

    Directory of Open Access Journals (Sweden)

    R. Sussmann

    2011-09-01

    Full Text Available We present a strategy (MIR-GBM v1.0 for the retrieval of column-averaged dry-air mole fractions of methane (XCH4 with a precision <0.3% (1-σ diurnal variation, 7-min integration and a seasonal bias <0.14% from mid-infrared ground-based solar FTIR measurements of the Network for the Detection of Atmospheric Composition Change (NDACC, comprising 22 FTIR stations. This makes NDACC methane data useful for satellite validation and for the inversion of regional-scale sources and sinks in addition to long-term trend analysis. Such retrievals complement the high accuracy and precision near-infrared observations of the younger Total Carbon Column Observing Network (TCCON with time series dating back 15 years or so before TCCON operations began.

    MIR-GBM v1.0 is using HITRAN 2000 (including the 2001 update release and 3 spectral micro windows (2613.70–2615.40 cm−1, 2835.50–2835.80 cm−1, 2921.00–2921.60 cm−1. A first-order Tikhonov constraint is applied to the state vector given in units of per cent of volume mixing ratio. It is tuned to achieve minimum diurnal variation without damping seasonality. Final quality selection of the retrievals uses a threshold for the goodness of fit (χ2 < 1 as well as for the ratio of root-mean-square spectral noise and information content (<0.15%. Column-averaged dry-air mole fractions are calculated using the retrieved methane profiles and four-times-daily pressure-temperature-humidity profiles from National Center for Environmental Prediction (NCEP interpolated to the time of measurement.

    MIR-GBM v1.0 is the optimum of 24 tested retrieval strategies (8 different spectral micro-window selections, 3 spectroscopic line lists: HITRAN 2000, 2004, 2008. Dominant errors of the non-optimum retrieval strategies are systematic HDO/H2O-CH4 interference errors leading to a seasonal bias up to ≈5%. Therefore interference

  2. Knowledge Automatic Indexing Based on Concept Lexicon and Segmentation Algorithm

    Institute of Scientific and Technical Information of China (English)

    WANG Lan-cheng; JIANG Dan; LE Jia-jin

    2005-01-01

    This paper is based on two existing theories about automatic indexing of thematic knowledge concept. The prohibit-word table with position information has been designed. The improved Maximum Matching-Minimum Backtracking method has been researched. Moreover it has been studied on improved indexing algorithm and application technology based on rules and thematic concept word table.

  3. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2012-01-01

    The CERN Table Tennis club and the Meyrin CTT are organizing two Table Tennis workshops from 2 to 6 July and from 20 to 24 August 2012 inclusive in Meyrin. A professional would be with your children from 14.00 pm to 18.00 pm: an instructor J + S category A. Training courses with specific themes, individual courses would be given depending on the level of the child’s game, “discoveries –table tennis games” courses and games with the robot. Other activities (stretching, relaxation). Afternoons (from 18 to 20 children): 40 CHF per workshop and per child. Evenings (from 18 to 20 adults): 60 CHF per workshop and per adult. For further information, please contact Mr. Monteil : Mobile: (+33) 06 61 31 70 47 E-mail: wilfried.monteil@free.fr.

  4. 1988 Bulletin compilation and index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1989-02-01

    This document is published to provide current information about the national program for managing spent fuel and high-level radioactive waste. This document is a compilation of issues from the 1988 calendar year. A table of contents and one index have been provided to assist in finding information.

  5. Web Thermo Tables - an On-Line Version of the TRC Thermodynamic Tables.

    Science.gov (United States)

    Kazakov, Andrei; Muzny, Chris D; Chirico, Robert D; Diky, Vladimir V; Frenkel, Michael

    2008-01-01

    It has long been understood that availability of thermophysical and thermochemical property data is vital to scientific research and industrial design. For over 65 years, the Thermodynamics Research Center (TRC) has been publishing tables of critically evaluated data covering physical and thermodynamic properties of pure compounds, TRC Tables-Hydrocarbons and TRC Tables-Non-Hydrocarbons. Over their long history, the TRC Tables have always been valued as a reputable source of evaluated thermophysical and thermodynamic data. To facilitate more flexible, convenient, and up-to-date access to the data, here, we present the release of the on-line version of the TRC tables, Web Thermo Tables (WTT). Presently, WTT contains data for 7838 compounds and over 950,000 evaluated data points. The tabulated information includes critical properties, vapor pressures and boiling temperatures, phase transition properties, volumetric properties, heat capacities and derived properties, transport properties, reaction state-change properties, as well as index of refraction, surface tension, and speed of sound. Various search options and data plotting capabilities are provided via the Web interface. WTT are distributed through the NIST Standard Reference Data Program [1].

  6. Indexing Images.

    Science.gov (United States)

    Rasmussen, Edie M.

    1997-01-01

    Focuses on access to digital image collections by means of manual and automatic indexing. Contains six sections: (1) Studies of Image Systems and their Use; (2) Approaches to Indexing Images; (3) Image Attributes; (4) Concept-Based Indexing; (5) Content-Based Indexing; and (6) Browsing in Image Retrieval. Contains 105 references. (AEF)

  7. One Table Restaurant

    Institute of Scientific and Technical Information of China (English)

    2005-01-01

    There are times when you want to celebrate, hold a formal business meeting or simply gather together with a few friends to eat and have a good time. One Table Restaurant offers you and your guests the perfect setting for every occasion,

  8. The Aerodynamic Plane Table

    Science.gov (United States)

    Zahm, A F

    1924-01-01

    This report gives the description and the use of a specially designed aerodynamic plane table. For the accurate and expeditious geometrical measurement of models in an aerodynamic laboratory, and for miscellaneous truing operations, there is frequent need for a specially equipped plan table. For example, one may have to measure truly to 0.001 inch the offsets of an airfoil at many parts of its surface. Or the offsets of a strut, airship hull, or other carefully formed figure may require exact calipering. Again, a complete airplane model may have to be adjusted for correct incidence at all parts of its surfaces or verified in those parts for conformance to specifications. Such work, if but occasional, may be done on a planing or milling machine; but if frequent, justifies the provision of a special table. For this reason it was found desirable in 1918 to make the table described in this report and to equip it with such gauges and measures as the work should require.

  9. A Modern Periodic Table.

    Science.gov (United States)

    Herrenden-Harker, B. D.

    1997-01-01

    Presents a modern Periodic Table based on the electron distribution in the outermost shell and the order of filling of the sublevels within the shells. Enables a student to read off directly the electronic configuration of the element and the order in which filling occurs. (JRH)

  10. The MSSA consequence tables

    Energy Technology Data Exchange (ETDEWEB)

    Sacks, I.J.

    1988-01-01

    The Master Safeguards and Security Agreement (MSSA) is the mechanism through which the U.S. Department of Energy is implementing a policy of graded safeguards. Under this concept, the level of protection provided to a target is proportional to the ''cost'' of the loss of the target. Cost is measured by use of the conditional risk equation in which the protection system ineffectiveness is multiplied by the consequence to society of a successful adversary attempt. The consequences which are used in the MSSA process were developed in the summer of the 1986 by a consensus of DOE personnel and contractors. There are separate consequence tables for theft of SNM, radiological sabotage. The consequence values in the tables were deliberately not cross-normalized. The consequence values in each table correspond to a societal or DOE cost, for example, the consequence values for SNM theft compared to a normalized estimate of the expected number of fatalities from a successful use of the stolen material times an estimate of the likelihood of successfully using the material. Consequence values for radiological sabotage correspond very roughly to a similar expected fatality level. Values for industrial sabotage are an estimate of the impact on DOE weapons production or impact on the nuclear weapons stockpile. Problems have arisen in the use of these tables and are discussed in the paper.

  11. A Modern Periodic Table.

    Science.gov (United States)

    Herrenden-Harker, B. D.

    1997-01-01

    Presents a modern Periodic Table based on the electron distribution in the outermost shell and the order of filling of the sublevels within the shells. Enables a student to read off directly the electronic configuration of the element and the order in which filling occurs. (JRH)

  12. LOCKE Detailed Specification Tables

    CERN Document Server

    Menezo, Lucia G; Gregorio, Jose-Angel

    2012-01-01

    This document shows the detailed specification of LOCKE coherence protocol for each cache controller, using a table-based technique. This representation provides clear, concise visual information yet includes sufficient detail (e.g., transient states) arguably lacking in the traditional, graphical form of state diagrams.

  13. High-accuracy absolute distance measurement by two-wavelength double heterodyne interferometry with variable synthetic wavelengths

    CERN Document Server

    Kuramoto, Yoshiyuki

    2014-01-01

    We present an absolute distance measurement interferometer based on a two wavelength interferometer and a variable synthetic wavelength technique. The wavelength scanning range was 12 GHz, realized with a phase accuracy of 1.0 m{\\lambda} by heterodyne detection at each measurement wavelength. This small wavelength scanning range enabled the use of distributed feedback laser diodes as an interferometer light source and a fast 20 ms wavelength scanning time by injection current control. We demonstrated a measurement range of up to 1.5 m and an accuracy better than 1.2 nm in comparison with a displacement measurement interferometer, corresponding to a relative accuracy of 10-9. In addition, we also proposed expanding the range of maximum measurement and compensation of refractive index of air for linear colliders.

  14. Global Reference Tables Services Architecture

    Data.gov (United States)

    Social Security Administration — This database stores the reference and transactional data used to provide a data-driven service access method to certain Global Reference Table (GRT) service tables.

  15. Table Tennis Club

    CERN Multimedia

    Table Tennis Club

    2012-01-01

    2012 CERN Table Tennis Tournament As the campaign launched by the CERN medical service “Move! & Eat better” is designed in particular to encourage people at CERN to take more regular exercise, the CERN Table Tennis Club, with its traditional CERN Table Tennis Tournament is providing an excellent opportunity to practice moving. The tournament will take place at the Meyrin CTT, 2 rue de Livron, Saturday August 25, 2012, in the afternoon (starting at 13:30). It is open to all CERN staff, users, visitors and families, including of course summer students, who are strongly encouraged to participate. In order to register, simply send an E-mail to Jean-Pierre Revol (jean-pierre.revol@cern.ch). You may also find useful information on the Club Web page http://www.cern.ch/tabletennis CERN 2011 champion Savitha Flaecher, between the finalist Bertrand Mouches on her left, the winner of the consolation draw on her right (Sudarshan Paramesvaran), and far left, Denis Moriaud (semi-finalist a...

  16. Using Video Analysis and Machine Learning for Predicting Shot Success in Table Tennis

    Directory of Open Access Journals (Sweden)

    Lukas Draschkowitz

    2015-10-01

    Full Text Available Coaching professional ball players has become more and more dicult and requires among other abilities also good tactical knowledge. This paper describes a program that can assist in tactical coaching for table tennis by extracting and analyzing video data of a table tennis game. The here described application automatically extracts essential information from a table tennis match, such as speed, length, height and others, by analyzing a video of that game. It then uses the well known machine learning library " to learn about the success of a shot. Generalization is tested by using a training and a test set. The program then is able to predict the outcome of shots with high accuracy. This makes it possible to develop and verify tactical suggestions for players as part of an automatic analyzing and coaching tool, completely independent of human interaction.

  17. Modelling and simulation for table tennis referee regulation based on finite state machine.

    Science.gov (United States)

    Cui, Jianjiang; Liu, Zixuan; Xu, Long

    2017-10-01

    As referee's decisions are made artificially in traditional table tennis matches, many factors in a match, such as fatigue and subjective tendency, may lead to unjust decision. Based on finite state machine (FSM), this paper presents a model for table tennis referee regulation to substitute manual decisions. In this model, the trajectory of the ball is recorded through a binocular visual system while the complete rules extracted from the International Table Tennis Federation (ITTF) rules are described based on FSM. The final decision for the competition is made based on expert system theory. Simulation result shows that the proposed model has high accuracy, and can be generalised to other similar games such as badminton, volleyball, etc.

  18. Analysis of bromotryptophan and hydroxyproline modifications by high-resolution, high-accuracy precursor ion scanning utilizing fragment ions with mass-deficient mass tags.

    Science.gov (United States)

    Steen, Hanno; Mann, Matthias

    2002-12-15

    Protein modifications are often detected by precursor ion scanning. When quadrupole TOF mass spectrometers are used for precursor ion scanning with high-resolution, high-accuracy fragment ion selection, "reporter" ions are required to have a unique mass within +/-0.04 Da or less instead of +/-0.5 Da on triple quadrupole mass spectrometers, the traditional instrument used for precursor ion scanning. Thus, characteristic fragment ions can be utilized even if other fragment ions have the same nominal mass as long as the characteristic fragment ions are slightly mass deficient as compared to the other fragments, i.e., when they have an inherent mass-deficient mass tag. Here, the immonium ions of bromotryptophan and hydroxyproline are described as two fragment ions characteristic for tryptophan-brominated and proline-hydroxylated peptides, respectively. The "reporter" ion of trytophan-brominated peptides is highly mass deficient due to the presence of bromine, thereby allowing the selective detection of these species and the distinction from other dipeptidic a-, b-, and y-fragment ions by high-resolution, high-accuracy precursor ion scanning. This strategy also enables the differentiation between precursors giving rise to the oxygen-containing immonium ion of hydroxyproline and precursors of the immonium ions of near-ubiquitous leucine/isoleucine. Both immonium ions have the same nominal mass of 86 Da, but the exact masses differ by less than 0.04 Da. High-resolution, high-accuracy precursor ion scanning enabled the identification of proline-hydroxylated and tryptophan-brominated species and the directed analysis of species carrying these modifications in a highly complex Conus textile conotoxin mixture. This lead to the characterization of one novel C. textile conotoxin containing a bromotryptophan residue and one novel C. textile conotoxin carrying two hydroxyproline residues.

  19. First results using a new technology for measuring masses of very short-lived nuclides with very high accuracy the MISTRAL program at ISOLDE

    CERN Document Server

    Monsanglant, C; Audi, G; Bollen, G; Borcea, C; Conreur, G; Cousin, R; Doubre, H; Duma, M; Jacotin, M; Henry, S; Képinski, J F; Kluge, H J; Lebée, G; Le Scornet, G; Lunney, S; De Saint-Simon, M; Scheidenberger, C; Thibault, C

    1999-01-01

    MISTRAL is an experimental program to measure masses of very short- lived nuclides (T$_{1/2}$ down to a few ms), with a very high accuracy (a few 10$^{-7}$). There were three data taking periods with radioactive beams and 22 masses of isotopes of Ne, Na*, Mg, Al*, K, Ca, and Ti were measured. The systematic errors are now under control at the level of 8$\\TIMES10^{-7}$, allowing to come close to the expected accuracy. Even for the very weakly produced $^{30}$Na (1 ion at the detector per proton burst), the final accuracy is 7$\\TIMES10^{-7}$. (15 refs).

  20. A Software Module for High-Accuracy Calibration of Rings and Cylinders on CMM using Multi-Orientation Techniques (Multi-Step and Reversal methods)

    DEFF Research Database (Denmark)

    Tosello, Guido; De Chiffre, Leonardo

    . The Centre for Geometrical Metrology (CGM) at the Technical University of Denmark takes care of free form measurements, in collaboration with DIMEG, University of Padova, Italy. The present report describes a software module, ROUNDCAL, to be used for high-accuracy calibration of rings and cylinders....... The purpose of the software is to calculate the form error and the least square circle of rings and cylinders by mean of average of pontwise measuring results becoming from so-called multi-orientation techniques (both reversal and multi-step methods) in order to eliminate systematic errors of CMM ....

  1. A Software Module for High-Accuracy Calibration of Rings and Cylinders on CMM using Multi-Orientation Techniques (Multi-Step and Reversal methods)

    DEFF Research Database (Denmark)

    Tosello, Guido; De Chiffre, Leonardo

    . The Centre for Geometrical Metrology (CGM) at the Technical University of Denmark takes care of free form measurements, in collaboration with DIMEG, University of Padova, Italy. The present report describes a software module, ROUNDCAL, to be used for high-accuracy calibration of rings and cylinders....... The purpose of the software is to calculate the form error and the least square circle of rings and cylinders by mean of average of pontwise measuring results becoming from so-called multi-orientation techniques (both reversal and multi-step methods) in order to eliminate systematic errors of CMM ....

  2. Calibration for Relative Interior Orientation Relationship and Band-to-band Registration with High Accuracy of ZY-3 Multi-spectral Image

    Directory of Open Access Journals (Sweden)

    LI Qijun

    2016-06-01

    Full Text Available Using high accuracy match points extracted between the multi-spectral images that obtained at the same time,a position model of the CCD chips of the ZY-3 multi-spectral camera was proposed. Relative interior orientation relationship parameters were calculated and accurate band-to-band automatic registration of ZY-3 multi-spectral image was achieved based on the position model. The experimental result indicates that the band-to-band automatic registration accuracy of ZY-3 multi-spectral image is better than 0.3 pixels with the proposed method.

  3. A Tiled-Table Convention for Compressing FITS Binary Tables

    CERN Document Server

    Pence, William; White, Richard L

    2012-01-01

    This document describes a convention for compressing FITS binary tables that is modeled after the FITS tiled-image compression method (White et al. 2009) that has been in use for about a decade. The input table is first optionally subdivided into tiles, each containing an equal number of rows, then every column of data within each tile is compressed and stored as a variable-length array of bytes in the output FITS binary table. All the header keywords from the input table are copied to the header of the output table and remain uncompressed for efficient access. The output compressed table contains the same number and order of columns as in the input uncompressed binary table. There is one row in the output table corresponding to each tile of rows in the input table. In principle, each column of data can be compressed using a different algorithm that is optimized for the type of data within that column, however in the prototype implementation described here, the gzip algorithm is used to compress every column.

  4. AP Index

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Planetary Amplitude index - Bartels 1951. The a-index ranges from 0 to 400 and represents a K-value converted to a linear scale in gammas (nanoTeslas)--a scale that...

  5. Speech Indexing

    NARCIS (Netherlands)

    Ordelman, R.J.F.; Jong, de F.M.G.; Leeuwen, van D.A.; Blanken, H.M.; de Vries, A.P.; Blok, H.E.; Feng, L.

    2007-01-01

    This chapter will focus on the automatic extraction of information from the speech in multimedia documents. This approach is often referred to as speech indexing and it can be regarded as a subfield of audio indexing that also incorporates for example the analysis of music and sounds. If the objecti

  6. Cost-effective improvements of a rotating platform by integration of a high-accuracy inclinometer and encoders for attitude evaluation

    Science.gov (United States)

    Wen, Chenyang; He, Shengyang; Bu, Changgen; Hu, Peida

    2017-01-01

    Attitude heading reference systems (AHRSs) based on micro-electromechanical system (MEMS) inertial sensors are widely used because of their low cost, light weight, and low power. However, low-cost AHRSs suffer from large inertial sensor errors. Therefore, experimental performance evaluation of MEMS-based AHRSs after system implementation is necessary. High-accuracy turntables can be used to verify the performance of MEMS-based AHRSs indoors, but they are expensive and unsuitable for outdoor tests. This study developed a low-cost two-axis rotating platform for indoor and outdoor attitude determination. A high-accuracy inclinometer and encoders were integrated into the platform to improve the achievable attitude test accuracy. An attitude error compensation method was proposed to calibrate the initial attitude errors caused by the movements and misalignment angles of the platform. The proposed attitude error determination method was examined through rotating experiments, which showed that the standard deviations of the pitch and roll errors were 0.050° and 0.090°, respectively. The pitch and roll errors both decreased to 0.024° when the proposed attitude error determination method was used. This decrease validates the effectiveness of the compensation method. Experimental results demonstrated that the integration of the inclinometer and encoders improved the performance of the low-cost, two-axis, rotating platform in terms of attitude accuracy.

  7. 确定生态系统模型中高精度参数的研究%Research on Determining the High Accuracy Parameters in Ecosystem Model

    Institute of Scientific and Technical Information of China (English)

    蒋社想

    2013-01-01

    针对Lotka-Volterra生态系统模型中的高精度参数如何确定问题,本文通过对长期积累的观测数据进行分析,提出先对误差数据进行卡尔曼滤波器将噪声滤除,然后利用最小二乘曲线进行拟合,以确定模型中的参数在最小二乘曲线意义下的最优解,最后利用M atlab和M aple计算机软件进行了模拟仿真,结果表明该方法对高精度参数确定问题有一定的有效性。%Determining the high accuracy parameters of the Lotka -Volterra ecosystem models is a wor-thy research .Based on the long -term accumulation of analyzing observation data ,an approaching of Kalman Filter was proposed for noise filtering to error data in this paper ,then a least -squares curve fitting was used to determine the optimal solution of model parameters ,finally a simulation was tested by using the Matlab and Maple software .The result shows that the presented approach of determining high accuracy parameters has a certain effect .

  8. Classification of textures in satellite image with Gabor filters and a multi layer perceptron with back propagation algorithm obtaining high accuracy

    Directory of Open Access Journals (Sweden)

    Adriano Beluco, Paulo M. Engel, Alexandre Beluco

    2015-01-01

    Full Text Available The classification of images, in many cases, is applied to identify an alphanumeric string, a facial expression or any other characteristic. In the case of satellite images is necessary to classify all the pixels of the image. This article describes a supervised classification method for remote sensing images that integrates the importance of attributes in selecting features with the efficiency of artificial neural networks in the classification process, resulting in high accuracy for real images. The method consists of a texture segmentation based on Gabor filtering followed by an image classification itself with an application of a multi layer artificial neural network with a back propagation algorithm. The method was first applied to a synthetic image, like training, and then applied to a satellite image. Some results of experiments are presented in detail and discussed. The application of the method to the synthetic image resulted in the identification of 89.05% of the pixels of the image, while applying to the satellite image resulted in the identification of 85.15% of the pixels. The result for the satellite image can be considered a result of high accuracy.

  9. Fast converging with high accuracy estimates of satellite attitude and orbit based on magnetometer augmented with gyro, star sensor and GPS via extended Kalman filter

    Directory of Open Access Journals (Sweden)

    Tamer Mekky Ahmed Habib

    2011-12-01

    Full Text Available The primary goal of this work is to extend the work done in, Tamer (2009, to provide high accuracy satellite attitude and orbit estimates needed for imaging purposes and also before execution of spacecraft orbital maneuvers for the next Egyptian scientific satellite. The problem of coarse satellite attitude and orbit estimation based on magnetometer measurements has been treated in the literature. The current research expands the field of application from coarse and slow converging estimates to accurate and fast converging attitude and orbit estimates within 0.1°, and 10 m for attitude angles and spacecraft location respectively (1-σ. The magnetometer is used for both spacecraft attitude and orbit estimation, aided with gyro to provide angular velocity measurements, star sensor to provide attitude quaternion, and GPS receiver to provide spacecraft location. The spacecraft under consideration is subject to solar radiation pressure forces and moments, aerodynamics forces and moments, earth’s oblateness till the fourth order (i.e. J4, gravity gradient moments, and residual magnetic dipole moments. The estimation algorithm developed is powerful enough to converge quickly (actually within 10 s despite very large initial estimation errors with sufficiently high accuracy estimates.

  10. Deriving Extensional Spatial Composition Tables

    Science.gov (United States)

    El-Geresy, Baher; Abdelmoty, Alia I.; Ware, Andrew J.

    Spatial composition tables are fundamental tools for the realisation of qualitative spatial reasoning techniques. Studying the properties of these tables in relation to the spatial calculi they are based on is essential for understanding the applicability of these calculi and how they can be extended and generalised. An extensional interpretation of a spatial composition table is an important property that has been studied in the literature and is used to determine the validity of the table for the models it is proposed for. It provides means for consistency checking of ground sets of relations and for addressing spatial constraint satisfaction problems. Furthermore, two general conditions that can be used to test for extensionality of spatial composition tables are proposed and applied to the RCC8 composition table to verify the allowable models in this calculus.

  11. Efficient Tabling Mechanisms for Transaction Logic Programs

    CERN Document Server

    Fodor, Paul

    2007-01-01

    In this paper we present efficient evaluation algorithms for the Horn Transaction Logic (a generalization of the regular Horn logic programs with state updates). We present two complementary methods for optimizing the implementation of Transaction Logic. The first method is based on tabling and we modified the proof theory to table calls and answers on states (practically, equivalent to dynamic programming). The call-answer table is indexed on the call and a signature of the state in which the call was made. The answer columns contain the answer unification and a signature of the state after the call was executed. The states are signed efficiently using a technique based on tries and counting. The second method is based on incremental evaluation and it applies when the data oracle contains derived relations. The deletions and insertions (executed in the transaction oracle) change the state of the database. Using the heuristic of inertia (only a part of the state changes in response to elementary updates), mos...

  12. AA Index

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The geomagnetic aa index provides a long climatology of global geomagnetic activity using 2 antipodal observatories at Greenwich and Melbourne- IAGA Bulletin 37,...

  13. Walkability Index

    Data.gov (United States)

    U.S. Environmental Protection Agency — The Walkabiliy Index dataset characterizes every Census 2010 block group in the U.S. based on its relative walkability. Walkability depends upon characteristics of...

  14. On isomorphisms of integral table algebras

    Institute of Scientific and Technical Information of China (English)

    FAN; Yun(樊恽); SUN; Daying(孙大英)

    2002-01-01

    For integral table algebras with integral table basis T, we can consider integral R-algebra RT over a subring R of the ring of the algebraic integers. It is proved that an R-algebra isomorphism between two integral table algebras must be an integral table algebra isomorphism if it is compatible with the so-called normalizings of the integral table algebras.

  15. A simple high accuracy phase locked loop method%一种内同步高精度锁相环技术研究

    Institute of Scientific and Technical Information of China (English)

    耿攀; 吴卫民; 陈建明; 叶银忠; 刘以建

    2011-01-01

    本文提出一种适用于数字控制的内同步高精度锁相环方法.本方法实现简单,在系统正常工作情况下可以高精度跟踪电网同步信号.在失去电网同步信号后依然可以使系统按照原来的频率和相位继续稳定运行,更适用于需要在并网、离网自由切换工作的系统.本文首先详细分析了此处带内同步程序锁相环的工作原理,然后推导了采用这种锁相方法的具体精度,最后通过1kW样机实验验证了提出方法的正确性.%This paper proposes a simple high accuracy inner-synchronization phase locked loop method used for digital control. This method is very easy to be realized. When the system works under normal condition, it could track the grid synchronized signal in high accuracy. When the system losses the grid synchronized signal, it could keep stable operation under the former frequency and phase position, and it is more suitable for the systems which need to switch between grid-tied and stand-alone mode. In this paper, the working principle of the phase locked loop with inner-synchronized program is analyzed at first. The accuracy using this phase locked loop method is derived. Finally, experimental results on a l kW prototype prove the validity of the proposed method.

  16. High-accuracy 2D digital image correlation measurements using low-cost imaging lenses: implementation of a generalized compensation method

    Science.gov (United States)

    Pan, Bing; Yu, Liping; Wu, Dafang

    2014-02-01

    The ideal pinhole imaging model commonly assumed for an ordinary two-dimensional digital image correlation (2D-DIC) system is neither perfect nor stable because of the existence of small out-of-plane motion of the test sample surface that occurred after loading, small out-of-plane motion of the sensor target due to temperature variation of a camera and unavoidable geometric distortion of an imaging lens. In certain cases, these disadvantages can lead to significant errors in the measured displacements and strains. Although a high-quality bilateral telecentric lens has been strongly recommended to be used in the 2D-DIC system as an essential optical component to achieve high-accuracy measurement, it is not generally applicable due to its fixed field of view, limited depth of focus and high cost. To minimize the errors associated with the imperfectness and instability of a common 2D-DIC system using a low-cost imaging lens, a generalized compensation method using a non-deformable reference sample is proposed in this work. With the proposed method, the displacement of the reference sample rigidly attached behind the test sample is first measured using 2D-DIC, and then it is fitted using a parametric model. The fitted parametric model is then used to correct the displacements of the deformed sample to remove the influences of these unfavorable factors. The validity of the proposed compensation method is first verified using out-of-plane translation, out-of-plane rotation, in-plane translation tests and their combinations. Uniaxial tensile tests of an aluminum specimen were also performed to quantitatively examine the strain accuracy of the proposed compensation method. Experiments show that the proposed compensation method is an easy-to-implement yet effective technique for achieving high-accuracy deformation measurement using an ordinary 2D-DIC system.

  17. High accuracy NMR chemical shift corrected for bulk magnetization as a tool for structural elucidation of dilutable microemulsions. Part 1 - Proof of concept.

    Science.gov (United States)

    Hoffman, Roy E; Darmon, Eliezer; Aserin, Abraham; Garti, Nissim

    2016-02-01

    In microemulsions, changes in droplet size and shape and possible transformations occur under various conditions. They are difficult to characterize by most analytical tools because of their nano-sized structure and dynamic nature. Several methods are usually combined to obtain reliable information, guiding the scientist in understanding their physical behavior. We felt that there is a need for a technique that complements those in use today in order to provide more information on the microemulsion behavior, mainly as a function of dilution with water. The improvement of NMR chemical shift measurements independent of bulk magnetization effects makes it possible to study the very weak intermolecular chemical shift effects. In the present study, we used NMR high resolution magic angle spinning to measure the chemical shift very accurately, free of bulk magnetization effects. The chemical shift of microemulsion components is measured as a function of the water content in order to validate the method in an interesting and promising, U-type dilutable microemulsion, which had been previously studied by a variety of techniques. Phase transition points of the microemulsion (O/W, bicontinuous, W/O) and changes in droplet shape were successfully detected using high-accuracy chemical shift measurements. We analyzed the results and found them to be compatible with the previous studies, paving the way for high-accuracy chemical shifts to be used for the study of other microemulsion systems. We detected two transition points along the water dilution line of the concentrate (reverse micelles) corresponding to the transition from swollen W/O nano-droplets to bicontinuous to the O/W droplets along with the changes in the droplets' sizes and shapes. The method seems to be in excellent agreement with other previously studied techniques and shows the advantage of this easy and valid technique.

  18. Virginia ESI: INDEX (Index Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector polygons representing the boundaries of all hardcopy cartographic products produced as part of the Environmental Sensitivity Index...

  19. Louisiana ESI: INDEX (Index Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector polygons representing the boundaries of all the hardcopy cartographic products produced as part of the Environmental Sensitivity Index...

  20. Maryland ESI: INDEX (Index Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector polygons representing the boundaries of all hardcopy cartographic products produced as part of the Environmental Sensitivity Index...

  1. MCNPX Model/Table Comparison

    Energy Technology Data Exchange (ETDEWEB)

    J.S. Hendricks

    2003-03-03

    MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO{sub 2}, making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data tables are used for oxygen and models are used for uranium. The mix-and-match capability became available with MCNPX2.5.b (November 2002). For the first time, we present here comparisons that calculate radiation transport in materials with various combinations of data charts and model physics. The physics models are poor at low energies (<150 MeV); thus, data tables should be used when available. Our comparisons demonstrate the importance of the mix-and-match capability and indicate how well physics models work in the absence of data tables.

  2. High Accuracy Reference Network (HARN), We use the HARN that the State of WIsconsin Department of Transportation installed in 2005., Published in 2005, 1:600 (1in=50ft) scale, Lafayette County Land Records.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This High Accuracy Reference Network (HARN) dataset, published at 1:600 (1in=50ft) scale, was produced all or in part from Field Survey/GPS information as of 2005....

  3. MCNPX Model/Table Comparison

    CERN Document Server

    Hendricks, J S

    2003-01-01

    MCNPX is a Monte Carlo N-Particle radiation transport code extending the capabilities of MCNP4C. As with MCNP, MCNPX uses nuclear data tables to transport neutrons, photons, and electrons. Unlike MCNP, MCNPX also uses (1) nuclear data tables to transport protons; (2) physics models to transport 30 additional particle types (deuterons, tritons, alphas, pions, muons, etc.); and (3) physics models to transport neutrons and protons when no tabular data are available or when the data are above the energy range (20 to 150 MeV) where the data tables end. MCNPX can mix and match data tables and physics models throughout a problem. For example, MCNPX can model neutron transport in a bismuth germinate (BGO) particle detector by using data tables for bismuth and oxygen and using physics models for germanium. Also, MCNPX can model neutron transport in UO sub 2 , making the best use of physics models and data tables: below 20 MeV, data tables are used; above 150 MeV, physics models are used; between 20 and 150 MeV, data t...

  4. INDEXING MECHANISM

    Science.gov (United States)

    Kock, L.J.

    1959-09-22

    A device is presented for loading and unloading fuel elements containing material fissionable by neutrons of thermal energy. The device comprises a combination of mechanical features Including a base, a lever pivotally attached to the base, an Indexing plate on the base parallel to the plane of lever rotation and having a plurality of apertures, the apertures being disposed In rows, each aperture having a keyway, an Index pin movably disposed to the plane of lever rotation and having a plurality of apertures, the apertures being disposed in rows, each aperture having a keyway, an index pin movably disposed on the lever normal to the plane rotation, a key on the pin, a sleeve on the lever spaced from and parallel to the index pin, a pair of pulleys and a cable disposed between them, an open collar rotatably attached to the sleeve and linked to one of the pulleys, a pin extending from the collar, and a bearing movably mounted in the sleeve and having at least two longitudinal grooves in the outside surface.

  5. The Periodic Table in Croatia

    Directory of Open Access Journals (Sweden)

    Raos, N.

    2011-12-01

    Full Text Available The Croatian (Yugoslav Academy of Sciences and Arts was the first academy to elect D. I. Mendeleev as its honorary member (1882, whereas the periodic table of the elements has been taught regularly at the Zagreb University since 1888. The early interest of Croatian chemists in the periodic table should be attributed primarily to their pan-Slavic attitude, particularly as proof that Slavic people were able to produce "their own Newtons" (M. V. Lomonosov and D. I. Mendeleev. Such enthusiastic views, however, did not help in analyzing the contribution of Mendeleev and other scientists to the discovery and development of the periodic table of the elements.

  6. Table Tennis Mother”

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    GUAN Yan sat on the blue stand at Tianjin Stadium. Beside her were the members of China’ s National Table Tennis Team in purple sportswear. Looking at her, no one would associate this small, amiable, grey-haired old mother with the brave sportswomen and sportsmen, yet she is physician to China’s National Table Tennis Team. She has worked with them for 34 years, ever since the 26th World Table Tennis Championships. At that time she was 24 years old and a new graduate of Zhejiang

  7. Bronze Dragons and Phoenix Table

    Institute of Scientific and Technical Information of China (English)

    1999-01-01

    The table is one of the oldest kinds of furniture in China.Most, however, haven’t survived as they were made ofbamboo or wood, The discovery of this bronze table gives usa chance to see a real object from the Warring States Periodfor the first time. This bronze table was unearthed from the tomb of a kingof the Zhongshan Kingdom during the Warring States Periodat today’s Pingshan County, Hebei Province. The stand isformed from four two-winged dragons and four phoenixes

  8. Round Table on Chicano Literature

    Science.gov (United States)

    Bruce-Novoa, Juan

    1975-01-01

    Themes covered by this round table include the genres in Chicano literature, publication problems for Chicanos; the social role of the Chicano author; the Chicano-Mexican relationship, and the theater festival in Mexico City in 1974. (Author/AM)

  9. The redoubtable ecological periodic table

    Science.gov (United States)

    Ecological periodic tables are repositories of reliable information on quantitative, predictably recurring (periodic) habitat–community patterns and their uncertainty, scaling and transferability. Their reliability derives from their grounding in sound ecological principle...

  10. The Table Mountain Field Site

    Data.gov (United States)

    Federal Laboratory Consortium — The Table Mountain Field Site, located north of Boulder, Colorado, is designated as an area where the magnitude of strong, external signals is restricted (by State...

  11. The redoubtable ecological periodic table

    Science.gov (United States)

    Ecological periodic tables are repositories of reliable information on quantitative, predictably recurring (periodic) habitat–community patterns and their uncertainty, scaling and transferability. Their reliability derives from their grounding in sound ecological principle...

  12. High-accuracy topographical information extraction based on fusion of ASTER stereo-data and ICESat/GLAS data in Antarctica

    Institute of Scientific and Technical Information of China (English)

    Wang DongChen; SHEN Qiang; XU Ying; CHEN Gang

    2009-01-01

    In order to better support Antarctic Inland ice sheet expedition from Zhongshan Station to Dome A, the topographic data are necessary. At present, although the entire Antarctic DEM provided by RAMP (Ra-daraat Antarctic Mapping Project) was estimated at the highest horizontal (spatial) resolution of about 200 m, the real horizontal resolution of the DEM varies from place to place depending on the density and scale of the original source data. For ice shelves and the inland ice sheet, the horizontal resolution is about 5 km; the vertical accuracy is estimated to be ±50 m in interior East Antarctic ice sheet and away from the mountain ranges. Therefore, more accurate topographic data are unavailable in Antarc-tica. In order to meet the requirements of high-accuracy topographic information for further researches, this paper mainly addresses a fusion study of ASTER stereo pairs and ICESat/GLAS altimetry data for extraction of high-accuracy DEM in East Antarctica, based on the high horizontal resolution (15 m) of ASTER and vertical accuracy (13.8 cm) of ICESat/GLAS. First, some altimetry data were selected as vertical control points to reduce errors of image correlation matching during the extraction of ASTER-based DEM. Second, ice sheet altimetry data derived from ICESat were used to generate DEM ranging from 75° to 81°S because existing ASTER data do not cover this area and high density of the coverage of ICESat altimetry data. Finally, the DEM in coverage of the expedition route was produced. The analysis of result reveals that the DEM accuracy is improved significantly. The absolute vertical accuracy of DEM is higher than 15 m in some cases and higher than 30 m for all the areas along the expedition route except from the 009-001 scene; the interior accuracy is higher than 15 m and higher than 7 m in some cases. It can meet the requirements of topographic map at 1 : 50000 scale, which is an economic and advantageous method to produce the topographic products.

  13. Afghanistan Index

    DEFF Research Database (Denmark)

    Linnet, Poul Martin

    2007-01-01

    The Afghanistan index is a compilation of quantitative and qualitative data on the reconstruction and security effort in Afghanistan. The index aims at providing data for benchmarking of the international performance and thus provides the reader with a quick possibility to retrieve valid...... basis. The data are divided into different indicators such as security, polls, drug, social, economic, refugees etc. This represents a practical division and does not indicate that a picture as to for instance security can be obtained by solely looking at the data under security. In order to obtain...... a more valid picture on security this must incorporate an integrated look on all data meaning that for instance the economic data provides an element as to the whole picture of security....

  14. SUBJECT INDEX

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    2, 4, 6-trinitrobenzenesulphonic acid, zinc sulfate, experimental colitis, 2003328AC133 antigen, hematopoietic stem cells, fetal blood, immunophe-notyping, 2003138ALR2 gene, eNOS gene, PON1 gene, RAGE gene, 2003179 ATN-ISI, prognosis, acute renal failure, acute tubular necrosis-individual severity index, acute physiology and chronic health evaluation, 2003118 Alzheimer disease, interleukin-1 beta, tumor necrosis factor alpha,

  15. Assessing the Accuracy of Sentinel-3 SLSTR Sea-Surface Temperature Retrievals Using High Accuracy Infrared Radiiometers on Ships of Opportunity

    Science.gov (United States)

    Minnett, P. J.; Izaguirre, M. A.; Szcszodrak, M.; Williams, E.; Reynolds, R. M.

    2015-12-01

    The assessment of errors and uncertainties in satellite-derived SSTs can be achieved by comparisons with independent measurements of skin SST of high accuracy. Such validation measurements are provided by well-calibrated infrared radiometers mounted on ships. The second generation of Marine-Atmospheric Emitted Radiance Interferometers (M-AERIs) have recently been developed and two are now deployed on cruise ships of Royal Caribbean Cruise Lines that operate in the Caribbean Sea, North Atlantic and Mediterranean Sea. In addition, two Infrared SST Autonomous Radiometers (ISARs) are mounted alternately on a vehicle transporter of NYK Lines that crosses the Pacific Ocean between Japan and the USA. Both M-AERIs and ISARs are self-calibrating radiometers having two internal blackbody cavities to provide at-sea calibration of the measured radiances, and the accuracy of the internal calibration is periodically determined by measurements of a NIST-traceable blackbody cavity in the laboratory. This provides SI-traceability for the at-sea measurements. It is anticipated that these sensors will be deployed during the next several years and will be available for the validation of the SLSTRs on Sentinel-3a and -3b.

  16. Low-level measuring techniques for neutrons: High accuracy neutron source strength determination and fluence rate measurement at an underground laboratory

    Science.gov (United States)

    Zimbal, Andreas; Degering, Detlev; Reginatto, Marcel; Schuhmacher, Helmut; Wiegel, Burkhard; Zuber, Kai

    2013-08-01

    We report on measuring techniques for neutrons that have been developed at the Physikalisch-Technische Bundesanstalt (PTB), the German National Metrology Institute. PTB has characterized radioactive sources used in the BOREXINO and XENON100 experiments. For the BOREXINO experiment, a 228Th gamma radiation source was required which would not emit more than 10 neutrons per second. The determination of the neutron emission rate of this specially designed 228Th source was challenging due to the low neutron emission rate and because the ratio of neutron to gamma radiation was expected to be extremely low, of the order of 10-6. For the XENON100 detector, PTB carried out a high accuracy measurement of the neutron emission rate of an AmBe source. PTB has also done measurements in underground laboratories. A two month measurement campaign with a set of 3He-filled proportional counters was carried out in PTB's former UDO underground laboratory at the Asse salt mine. The aim of the campaign was to determine the intrinsic background of detectors, which is needed for the analysis of data taken in lowintensity neutron fields. At a later time, PTB did a preliminary measurement of the neutron fluence rate at the underground laboratory Felsenkeller operated by VKTA. By taking into account data from UDO, Felsenkeller, and detector calibrations made at the PTB facility, it was possible to estimate the neutron fluence rate at the Felsenkeller underground laboratory.

  17. Design and integration of a high accuracy multichannel analog CMOS peak detect and hold circuit for APD-based PET imaging.

    Science.gov (United States)

    Fang, Xiaochao; Brasse, David; Hu-Guo, Christine; Hu, Yann

    2012-04-01

    This paper presents the design of a high accuracy multichannel peak detect and hold (PDH) circuit. This PDH measures the energy of an event and is one part of a readout chain for avalanche photo diodes (APD)-based positron emission tomography (PET) imaging. The circuit is designed in a 0.35μm CMOS process. The proposed PDH is dedicated to ultra low amplitude, large amplitude range from several tens millivolts to 1.1 V, and fast peaking time (190 ns) semi-Gaussian pulses. The two-phase technique has been used to cancel the major error source of the classical CMOS PDH: offset. A two-gain OTA is applied to minimize the DC error. A peak error less 1% for a small input signal (amplitude is between 40 mV and 300 mV) and a peak error less than 0.2% for a large input signal (amplitude is between 300 mV and 1.1 V) have been obtained from test. The area of a PDH is equal to about 200 μm × 40 μm. In our PDH system, the drop rate is negligible.

  18. High accuracy measurement of the $^{235}$U(n,f) reaction cross-section in the 10-30 keV neutron energy range

    CERN Multimedia

    The analysis of the neutron flux of n_TOF (in EAR1) revealed an anomaly in the 10-30 keV neutron energy range. While the flux extracted on the basis of the $^{6}$Li(n,t)$^{4}$He and $^{10}$B(n,$\\alpha$)$^{7}$Li reactions mostly agreed with each other and with the results of FLUKA simulations of the neutron beam, the one based on the $^{235}$U(n,f) reaction was found to be systematically lower, independently of the detection system used. A possible explanation is that the $^{235}$U(n,f) crosssection in that energy region, where in principle should be known with an uncertainty of 1%, may be systematically overestimated. Such a finding, which has a negligible influence on thermal reactors, would be important for future fast critical or subcritical reactors. Furthermore, its interest is more general, since the $^{235}$U(n,f) reaction is often used at that energy to determine the neutron flux, or as reference in measurements of fission cross section of other actinides. We propose to perform a high-accuracy, high-r...

  19. Spectral responsivity calibration of the reference radiation thermometer at KRISS by using a super-continuum laser-based high-accuracy monochromatic source

    Science.gov (United States)

    Yoo, Yong Shim; Kim, Gun Jung; Park, Seongchong; Lee, Dong-Hoon; Kim, Bong-Hak

    2016-12-01

    We report on the calibration of the relative spectral responsivity of the reference radiation thermometer, model LP4, which is used for the experimental realisation of the international temperature scale of 1990 above 960 °C at the Korea Research Institute of Standards and Science. The relative spectral responsivity of LP4 is measured by using a monochromatic source consisting of a super-continuum laser and a double-grating monochromator. By monitoring the wavelength of the output beam directly with a calibrated wavelength-meter, we achieved a high-accuracy measurement of spectral responsivity with a maximum wavelength error of less than 3 pm, a narrow spectral bandwidth of less than 0.4 nm, and a high dynamic range over 8 decades. We evaluated the contributions of various uncertainty components of the spectral responsivity measurement to the uncertainty of the temperature scale based on a practical estimation approach, which numerically calculates the maximal effects of the variations of each component. As a result, we evaluate the uncertainty contribution from the spectral responsivity measurement to the temperature scale to be less than 64 mK (k  =  1) in a range from 660 °C to 2749 °C for the LP4 with a filter at 650 nm.

  20. ExoMol molecular line lists XIX: high-accuracy computed hot line lists for H218O and H217O

    Science.gov (United States)

    Polyansky, Oleg L.; Kyuberis, Aleksandra A.; Lodi, Lorenzo; Tennyson, Jonathan; Yurchenko, Sergei N.; Ovsyannikov, Roman I.; Zobov, Nikolai F.

    2017-04-01

    Hot line lists for two isotopologues of water, H218O and H217O, are presented. The calculations employ newly constructed potential energy surfaces (PES), which take advantage of a novel method for using the large set of experimental energy levels for H216O to give high-quality predictions for H218O and H217O. This procedure greatly extends the energy range for which a PES can be accurately determined, allowing an accurate prediction of higher lying energy levels than are currently known from direct laboratory measurements. This PES is combined with a high-accuracy, ab initio dipole moment surface of water in the computation of all energy levels, transition frequencies and associated Einstein A coefficients for states with rotational excitation up to J = 50 and energies up to 30 000 cm-1. The resulting HotWat78 line lists complement the well-used BT2 H216O line list. Full line lists are made available online as Supporting Information and at www.exomol.com.

  1. Gravity Compensation Methods for High-Accuracy INS%高精度惯性导航系统重力补偿方法

    Institute of Scientific and Technical Information of China (English)

    陆志东; 王晶

    2016-01-01

    重力扰动是高精度惯性导航系统的一项重要误差源,重力补偿是降低惯性导航系统误差的一项关键技术。通过基于对确定性模型、数据及外部辅助3种重力补偿方法的分析和研究,总结得出了各补偿方法的研究方向以及适用范围,对进一步提高我国未来更高精度惯性导航系统的导航精度具有指导意义,并提供了方法上的参考。%Gravity disturbance is an important error source of high-accuracy inertial navigation system(INS). Gravity compensation is a critical technology to reduce error of INS. After analysing and researching deterministic model,data and external assist gravity compensation methods,research area and range of application were summarized. It can provide guidance and reference to improve INS’s navigation accuracy.

  2. Magnetic resonance imaging for preoperative staging of rectal cancer in clinical practice: high accuracy in predicting circumferential margin with clinical benefit.

    Science.gov (United States)

    Videhult, P; Smedh, K; Lundin, P; Kraaz, W

    2007-06-01

    The aims were to determine agreement between staging of rectal cancer made by magnetic resonance imaging (MRI) and histopathological examination and the influence of MRI on choice of radiotherapy (RT) and surgical procedure. In this retrospective audit, preoperative MRI was performed on 91 patients who underwent bowel resection, with 93% having total mesorectal excision. Tumour stage according to mural penetration, nodal status and circumferential resection margin (mCRM) involvement was assessed and compared with histopathology. Five radiologists interpreted the images. Overall agreement between MRI and histopathology for T stage was 66%. The greatest difficulty was in distinguishing between T1, T2 and minimal T3 tumours. The accuracy for mCRM (MRI) was 86% (78/91),with an interobserver variation between 80% and 100%. In the 13 cases with no agreement between mCRM and pCRM (pathological), seven had long-term RT and nine en bloc resections, indicating that the margins initially were involved with an even higher accuracy for mCRM. Preoperative short-term RT was routine, but based on MRI findings, choice of RT was affected in 29 cases (32%); 17 patients had no RT and 12 long-term RT. The surgical procedure was affected in 17 cases (19%) with planned perirectal en bloc resections in all. CRM was involved (CRM with high accuracy in rectal cancer. MRI could be used as a clinical guidance with high reliability as indicated by the low figures of histopathologically involved CRM.

  3. 高精度超声风速测量系统设计与实现%Design and Implementation of High Accuracy Ultrasonic Anemometer

    Institute of Scientific and Technical Information of China (English)

    丁向辉; 李平; 孟晓辉

    2011-01-01

    时差法是超声风速风向测量系统的基本方法.文中首先对影响时差法测量精度的因素进行分析,针对这些影响因素,在超声换能器设计、阵型设计、电路系统设计和信号处理算法等方面提出了提高系统精度的设计方案,并制成样机.实验测试表明,文中所实现的系统已经基本达到国际尖端产品的测量精度,且具有体积小、可靠性高等优点,具有很高的实际应用价值.%In ultrasonic anemometer systems,time difference measurement method is used in wide range. The factors that affect the time difference measurement accuracy were analyzed. According to the analysis, the ultrasonic transducer design , system mechanical structure,system circuit design and signal processing; methods were discussed. A high accuracy ultrasonic anemometer 8ystem solution was designed. The prototype system was implemented. Experiments show that the proposed system has reached the same performance as the top products on shelf. Besides , the system has small size , high resolution and reliability , which is valuable in practice.

  4. High-accuracy, high-precision, high-resolution, continuous monitoring of urban greenhouse gas emissions? Results to date from INFLUX

    Science.gov (United States)

    Davis, K. J.; Brewer, A.; Cambaliza, M. O. L.; Deng, A.; Hardesty, M.; Gurney, K. R.; Heimburger, A. M. F.; Karion, A.; Lauvaux, T.; Lopez-Coto, I.; McKain, K.; Miles, N. L.; Patarasuk, R.; Prasad, K.; Razlivanov, I. N.; Richardson, S.; Sarmiento, D. P.; Shepson, P. B.; Sweeney, C.; Turnbull, J. C.; Whetstone, J. R.; Wu, K.

    2015-12-01

    The Indianapolis Flux Experiment (INFLUX) is testing the boundaries of our ability to use atmospheric measurements to quantify urban greenhouse gas (GHG) emissions. The project brings together inventory assessments, tower-based and aircraft-based atmospheric measurements, and atmospheric modeling to provide high-accuracy, high-resolution, continuous monitoring of emissions of GHGs from the city. Results to date include a multi-year record of tower and aircraft based measurements of the urban CO2 and CH4 signal, long-term atmospheric modeling of GHG transport, and emission estimates for both CO2 and CH4 based on both tower and aircraft measurements. We will present these emissions estimates, the uncertainties in each, and our assessment of the primary needs for improvements in these emissions estimates. We will also present ongoing efforts to improve our understanding of atmospheric transport and background atmospheric GHG mole fractions, and to disaggregate GHG sources (e.g. biogenic vs. fossil fuel CO2 fluxes), topics that promise significant improvement in urban GHG emissions estimates.

  5. 转台轴承在立式车床中的应用%Application of Rotary Table Bearing in Vertical Lathe

    Institute of Scientific and Technical Information of China (English)

    范长庚

    2016-01-01

    介绍一种转台轴承,并将其应用于立式车床转台中。与传统的立式车床转台相比,采用转台轴承的转台有结构简单、装配简便、运转精度高等许多优点,适合推广应用。%A kind of rotary table bearing was introduced, it was applied to the rotary table of a vertical lathe.Compared with tra-ditional rotary table of vertical lathe, the rotary table has simple structure, simple assembly and high accuracy.It is suitable for wide application.

  6. Rainbow refractometry on particles with radial refractive index gradients

    Energy Technology Data Exchange (ETDEWEB)

    Saengkaew, Sawitree [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France); Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Charinpanitkul, Tawatchai; Vanisri, Hathaichanok; Tanthapanichakoon, Wiwut [Chulalongkorn University, Center of Excellence in Particle Technology, Faculty of Engineering, Bangkok (Thailand); Biscos, Yves; Garcia, Nicolas; Lavergne, Gerard [ONERA/DMAE, Toulouse (France); Mees, Loic; Gouesbet, Gerard; Grehan, Gerard [CNRS/Universite et INSA de Rouen, UMR 6614/CORIA, BP12, 76 800, Saint Etienne du Rouvray CEDEX (France)

    2007-10-15

    The rainbow refractrometry, under its different configurations (classical and global), is an attractive technique to extract information from droplets in evaporation such as diameter and temperature. Recently a new processing strategy has been developed which increases dramatically the size and refractive index measurements accuracy for homogeneous droplets. Nevertheless, for mono component as well as for multicomponent droplets, the presence of temperature and/or of concentration gradients induce the presence of a gradient of refractive index which affects the interpretation of the recorded signals. In this publication, the effect of radial gradient on rainbow measurements with a high accuracy never reached previously is quantified. (orig.)

  7. A Novel AOA Clustering-based Localization Algorithm with High Accuracy%高精度AOA分簇定位算法

    Institute of Scientific and Technical Information of China (English)

    黄琦; 黄海; 谢冬青

    2014-01-01

    如今的网络安全主要联系于无线传感网络,定位算法的优劣决定了无线传感网络的能力,也就决定了网络安全的能力。分簇定位算法具有能量效率高、可扩展性好、简单可行的优点,但是分簇算法属于一种模糊定位算法,不具有较高的精度。此外,分簇算法的簇首替换如果在全局范围内进行选择,很容易造成高消耗。AOA(angle of arrival)算法在复杂环境中具有精确的定位能力。文章通过运用AOA测距算法,使分簇算法的每个节点具有自探测能力,通过节点相对夹角,用坐标算法算出相应于簇首的坐标。为了让能量消耗低于普通分簇算法,文章根据完全图中能量有效原理,让分簇只在初始时进行一次,在每个簇内无簇首或能量低时,对簇首进行重选举,再将信息发送给总簇。Matlab仿真实验表明,文章算法实现了range-based的分簇定位算法,且保留了快速部署、能量效率高、高精度的优点。根据实验,文章算法适用于不松散部署的无线传感网络。%Nowadays, network security mostly connects to wireless sensor network (WSN), the ability of WSN rests with the quality of the localization algorithm. Clustering localization algorithm is efifcient, highly scalable, simple and practical algorithm, but it is also a fuzzy match algorithm which does not have high accuracy. If cluster-head switch of clustering algorithm is done within the global nodes, it will cause large amount of energy waste. The AOA algorithm has good localization ability under complex environment. In this paper, by using the AOA algorithm, every node has the ability of self-detection and can calculate the coordinates relative to cluster-head with coordinate algorithm by using node relative-angle. In order to reduce energy waste, this paper designs a algorithm base upon energy-efifcient principle of the complete graph. Separating clusters only runs once

  8. A Peer-to-Peer Indexing Service for Data Grids

    DEFF Research Database (Denmark)

    Jensen, Henrik Thostrup; Kleist, Josva

    2007-01-01

    We present an index system for locating files or other data objects in a grid environment. The system is constructed using a distributed hash table, and is scalable, fault-tolerant, and self-organizing. The index is dynamically updated to reflect the state of the storage elements, and can hence...

  9. Mildronate (Meldonium) in professional sports - monitoring doping control urine samples using hydrophilic interaction liquid chromatography - high resolution/high accuracy mass spectrometry.

    Science.gov (United States)

    Görgens, Christian; Guddat, Sven; Dib, Josef; Geyer, Hans; Schänzer, Wilhelm; Thevis, Mario

    2015-01-01

    To date, substances such as Mildronate (Meldonium) are not on the radar of anti-doping laboratories as the compound is not explicitly classified as prohibited. However, the anti-ischemic drug Mildronate demonstrates an increase in endurance performance of athletes, improved rehabilitation after exercise, protection against stress, and enhanced activations of central nervous system (CNS) functions. In the present study, the existing evidence of Mildronate's usage in sport, which is arguably not (exclusively) based on medicinal reasons, is corroborated by unequivocal analytical data allowing the estimation of the prevalence and extent of misuse in professional sports. Such data are vital to support decision-making processes, particularly regarding the ban on drugs in sport. Due to the growing body of evidence (black market products and athlete statements) concerning its misuse in sport, adequate test methods for the reliable identification of Mildronate are required, especially since the substance has been added to the 2015 World Anti-Doping Agency (WADA) monitoring program. In the present study, two approaches were established using an in-house synthesized labelled internal standard (Mildronate-D3 ). One aimed at the implementation of the analyte into routine doping control screening methods to enable its monitoring at the lowest possible additional workload for the laboratory, and another that is appropriate for the peculiar specifics of the analyte, allowing the unequivocal confirmation of findings using hydrophilic interaction liquid chromatography-high resolution/high accuracy mass spectrometry (HILIC-HRMS). Here, according to applicable regulations in sports drug testing, a full qualitative validation was conducted. The assay demonstrated good specificity, robustness (rRT=0.3%), precision (intra-day: 7.0-8.4%; inter-day: 9.9-12.9%), excellent linearity (R>0.99) and an adequate lower limit of detection (<10 ng/mL).

  10. 新型高准确度分光光度计的设计与测试%Design and testing of high-accuracy spectrophotometer

    Institute of Scientific and Technical Information of China (English)

    周磊; 郑小兵

    2008-01-01

    Interference filters are used in many fields,such as radiometric and photometric measurements and so on.For high-accuracy measurement of spectral transmittance of interference filter,an automated,single-beam spectrophotometer based on DK242 double monochromator is developed,whose input optics and output optics are designed independently.In order to improve the accuracv of measurement,the averaging detector unit with a silicon detector is introduced into the measurement system.The source of the uncertainties includes wavelength calibration,detector nonlinearity,systcminstability,beam displacement and so on.A total uncertainty of 8.78x10-3is estinlated for transmittance measurements of interference filters,which meets the requirement of the design.%目前,干涉滤光片已广泛运用到辐射度学测量、光度学测量等领域,为保证其光谱透过率测量的高准确度,提出了采用基于DK242单色仪,入射、出射光路独立设计的全自动,单光路分光光度计,其测量部分采用了硅探测器与积分球组合的探测单元,提高了测量的准确度.装置的不确定度源包括波长定标、探测器均匀性、系统稳定性、光束移位等,装置整体不确定度达到8.78×10-3,满足设计要求.

  11. Design of Programmable Control Current Source with High Accuracy%高精度程控电流源的设计

    Institute of Scientific and Technical Information of China (English)

    王丽; 康红明; 谢东岩

    2012-01-01

    采用ADuC812单片机作为整机的控制单元,通过软件和外围电路设计,使程控直流电流源具备实时检测实际输出电流值的功能,并通过采样将实际输出反馈到单片机中,单片机对数据进行分析、处理后再重新调整D/A输出的值,从而达到稳流的目的.所设计的电流源还具有电流可预置、可步进调整以及可同时显示电流预置值和实测值等功能.该系统具有结构简单、工作稳定、纹波电流小、控制精度高、成本低廉、实用性强的特点.%The programmable control DC current source based on a single-chip microcomputer ADuC812 was designed,and the hardware structure and software program was introduced. The current source can measure actual output current,and output signal of (he current can be fed back to the single-chip microcomputer through the sampling at the same time. The single-chip microcomputer readjusts output value of D/A after data analysis to stabilize current. The current source, realized that the current can be set and adjusted step by step,and the steppoint value and actual measurement value can be displayed at the same time. The system is characterized by simple structure,good stability,low ripple current,high accuracy of control,low cost and high practical value.

  12. Linear Tabling Strategies and Optimizations

    CERN Document Server

    Zhou, Neng-Fa; Shen, Yi-Dong

    2007-01-01

    Recently, the iterative approach named linear tabling has received considerable attention because of its simplicity, ease of implementation, and good space efficiency. Linear tabling is a framework from which different methods can be derived based on the strategies used in handling looping subgoals. One decision concerns when answers are consumed and returned. This paper describes two strategies, namely, {\\it lazy} and {\\it eager} strategies, and compares them both qualitatively and quantitatively. The results indicate that, while the lazy strategy has good locality and is well suited for finding all solutions, the eager strategy is comparable in speed with the lazy strategy and is well suited for programs with cuts. Linear tabling relies on depth-first iterative deepening rather than suspension to compute fixpoints. Each cluster of inter-dependent subgoals as represented by a top-most looping subgoal is iteratively evaluated until no subgoal in it can produce any new answers. Naive re-evaluation of all loopi...

  13. The Alfonsine tables of Toledo

    CERN Document Server

    Chabás, José

    2003-01-01

    The Alfonsine Tables of Toledo is for historians working in the fields of astronomy, science, the Middle Ages, Spanish and other Romance languages. It is also of interest to scholars interested in the history of Castile, in Castilian-French relations in the Middle Ages and in the history of patronage. It explores the Castilian canons of the Alfonsine Tables and offers a study of their context, language, astronomical content, and diffusion. The Alfonsine Tables of Toledo is unique in that it: includes an edition of a crucial text in history of science; provides an explanation of astronomy as it was practiced in the Middle Ages; presents abundant material on early scientific language in Castilian; presents new material on the diffusion of Alfonsine astronomy in Europe; describes the role of royal patronage of science in a medieval context.

  14. Table Extraction from Web Pages Using Conditional Random Fields to Extract Toponym Related Data

    Science.gov (United States)

    Luthfi Hanifah, Hayyu’; Akbar, Saiful

    2017-01-01

    Table is one of the ways to visualize information on web pages. The abundant number of web pages that compose the World Wide Web has been the motivation of information extraction and information retrieval research, including the research for table extraction. Besides, there is a need for a system which is designed to specifically handle location-related information. Based on this background, this research is conducted to provide a way to extract location-related data from web tables so that it can be used in the development of Geographic Information Retrieval (GIR) system. The location-related data will be identified by the toponym (location name). In this research, a rule-based approach with gazetteer is used to recognize toponym from web table. Meanwhile, to extract data from a table, a combination of rule-based approach and statistical-based approach is used. On the statistical-based approach, Conditional Random Fields (CRF) model is used to understand the schema of the table. The result of table extraction is presented on JSON format. If a web table contains toponym, a field will be added on the JSON document to store the toponym values. This field can be used to index the table data in accordance to the toponym, which then can be used in the development of GIR system.

  15. Study on comparison of different methods to calculating sensitivity index of Jensen model

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    Real coded Accelerating Genetic Algorithm (RAGA), Chaos Algorithm (CA) were used to solve the sensitivity index of Jensen model which is one of models of crop water production function. After comparing with the outcome of Least Square Regression (LSR), the result showed that RAGA not only had high accuracy and more effective, but also saved calculating time. The authors provides new effective methods for calculating index of crop water production function.

  16. General purpose steam table library :

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, John H.; Belcourt, Kenneth Noel; Nourgaliev, Robert

    2013-08-01

    Completion of the CASL L3 milestone THM.CFD.P7.04 provides a general purpose tabular interpolation library for material properties to support, in particular, standardized models for steam properties. The software consists of three parts, implementations of analytic steam models, a code to generate tables from those models, and an interpolation package to interface the tables to CFD codes such as Hydra-TH. Verification of the standard model is maintained through the entire train of routines. The performance of interpolation package exceeds that of freely available analytic implementation of the steam properties by over an order of magnitude.

  17. 花铃期棉花对地下水埋深和高温的响应及排渍指标确定%Response of cotton during flowering and boll-forming period to groundwater table and heat stress as well as determination of drainage index

    Institute of Scientific and Technical Information of China (English)

    杨威; 朱建强; 吴启侠; 王曾桢; 叶浩; 程伦国

    2015-01-01

    Cotton production is frequently limited by periods of subsurface waterlogging and heat stress in Hubei plain area of China in summer, but the combined effects of surface waterlogging and heat stress on cotton have been rarely studied. In order to investigate the effects of groundwater table (WT) on main morph-physiological traits and yield of cotton under high temperature (HT) condition as well as determination of drainage index, the combination of WT and HT stresses was carried out by test-pit in Irrigation and Drainage Experimental Station of the Four Lake Engineering Management Bureau, Jingzhou, China in 2012 and 2013. WT were set as 0, 30 and 50 cm with waterlogging for 10 days and HT duration for 6 days (from 10:00 to 16:00 per day) during flowering and boll-forming period of cotton. The morphological indexes as plant height (PH) and complex ratio of red stem to green stem (R/G), and physiological traits as photosynthetic efficiency, leaf pigments and antioxidant enzymes along with yield components were measured and analyzed. The results were as follows: the PH and R/G of cotton were decreased in WT treatments of 0 and 30 cm, whereas they were not significantly different in HT situation. Chlorophyll (Chl) content and photosystem II potential photochemical conversion efficiency of leaf (4 th from top) decreased with increasing WT under HT condition. The relationship of either Chl or photochemical conversion efficiency with WT and HT could be described by linear models (R2=0.961-0986,P<0.01). Superoxide dismutase (SOD) and peroxidase (POD) activities of leaves (4th from top) increased firstly and then declined and catalase (CAT) activity declined with the increment in WT, but malondialdehyde (MDA) content increased. SOD and POD activities decreased remarkably while MDA content increased rapidly at WT of 0-30 cm with HT stress, indicating that HT exacerbated the degree of membrane lid peroxidation. However, HT contributed to subsurface waterlogging tolerance by

  18. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  19. Sand and Water Table Play

    Science.gov (United States)

    Wallace, Ann H.; White, Mary J.; Stone, Ryan

    2010-01-01

    The authors observed preschoolers engaged at the sand and water table to determine if math could be found within their play. Wanting to understand how children interact with provided materials and what kinds of math ideas they explore during these interactions, the authors offer practical examples of how such play can promote mathematical…

  20. table tennis的来历

    Institute of Scientific and Technical Information of China (English)

    王淑清

    2006-01-01

    乒乓球运动在运动史上是一项年轻的体育运动,只有100多年的历史,乒乓球的英文名称有table tennis和ping-pong两种。Table tennis出现不久,便成了一种风靡一时的热门运动。20世纪初,美国开始成套地生产乒乓球的比赛用具。最初,table tennis有其他名称 ,如Indoor tennis。后来,一位美国制造商以乒乓球撞击时所发出的声音创造出ping-pong这个新词,作为他们制造的“乒乓球”专利注册商标。Ping-pong后来成了table tennis的另一个正式名。当它传到中国后,人们又创造出“乒乓球”这个新的词语。

  1. Putting food on the table

    NARCIS (Netherlands)

    Candel, J.J.L.

    2016-01-01

    Putting food on the table: the European Union governance of the wicked problem of food security Jeroen Candel Food security concerns and arguments have made a revival in European Union (EU) governance since the 2007-8 and 2010 global food price crises. This renaissa

  2. Expanding analytical possibilities concerning the detection of stanozolol misuse by means of high resolution/high accuracy mass spectrometric detection of stanozolol glucuronides in human sports drug testing.

    Science.gov (United States)

    Schänzer, Wilhelm; Guddat, Sven; Thomas, Andreas; Opfermann, Georg; Geyer, Hans; Thevis, Mario

    2013-01-01

    Anabolic-androgenic steroids (AAS) represent one of the most frequently detected classes of prohibited substances in doping controls. Due to their long-lasting beneficial effects on athletic performance, utmost retrospectivity via urine analysis is desirable and accomplished by targeting long-term metabolites of the respective drugs. In case of stanozolol, a substantial variety of metabolites has enabled the identification of numerous adverse analytical findings in the past, and recent studies concerning complementary phase-I and phase-II metabolites has further expanded the windows of opportunity for detecting the abuse of stanozolol. In this study, the utility of liquid chromatography-high resolution/high accuracy (tandem) mass spectrometry (LC-MS/MS) for the detection of 3'-OH-stanozolol glucuronide in sports drug testing is presented and the identification of two additional and so far unreported metabolites is shown. The structures of the complementary glucuronic acid conjugates were attributed to stanozolol-N-glucuronide and 17-epistanozolol-N-glucuronide. By means of chemical synthesis, stanozolol-N-glucuronide was prepared and used to corroborate the suggested structures. The 3'-OH-stanozolol glucuronide and the newly identified target compounds were implemented into routine sports drug test assays consisting of direct injection LC-MS/MS or solid-phase extraction (SPE) followed by LC-MS/MS. A considerably expanded detection window for stanozolol abuse was demonstrated compared to the use of conventional phase-I metabolites and methodologies based on, for example, low resolution LC-MS/MS or gas chromatography-tandem mass spectrometry (GC-MS/MS). The commercial availability of 3'-OH-stanozolol glucuronide has been of great value for confirmatory purposes, and 17-epistanozolol-N-glucuronide was found to be a favourable long-term metabolite for doping controls as it was observed up to 28 days post-administration of the drug. Applying the established

  3. High Accuracy of Common HIV-Related Oral Disease Diagnoses by Non-Oral Health Specialists in the AIDS Clinical Trial Group.

    Directory of Open Access Journals (Sweden)

    Caroline H Shiboski

    Full Text Available Many studies include oral HIV-related endpoints that may be diagnosed by non-oral-health specialists (non-OHS like nurses or physicians. Our objective was to assess the accuracy of clinical diagnoses of HIV-related oral lesions made by non-OHS compared to diagnoses made by OHS.A5254, a cross-sectional study conducted by the Oral HIV/AIDS Research Alliance within the AIDS Clinical Trial Group, enrolled HIV-1-infected adults participants from six clinical trial units (CTU in the US (San Francisco, New York, Chapel Hill, Cleveland, Atlanta and Haiti. CTU examiners (non-OHS received standardized training on how to perform an oral examination and make clinical diagnoses of specific oral disease endpoints. Diagnoses by calibrated non-OHS were compared to those made by calibrated OHS, and sensitivity and specificity computed.Among 324 participants, the majority were black (73%, men (66%, and the median CD4+ cell count 138 cells/mm(3. The overall frequency of oral mucosal disease diagnosed by OHS was 43% in US sites, and 90% in Haiti. Oral candidiasis (OC was detected in 153 (47% by OHS, with erythematous candidiasis (EC the most common type (39% followed by pseudomembranous candidiasis (PC; 26%. The highest prevalence of OC (79% was among participants in Haiti, and among those with CD4+ cell count ≤ 200 cells/mm(3 and HIV-1 RNA > 1000 copies/mL (71%. The sensitivity and specificity of OC diagnoses by non-OHS were 90% and 92% (for EC: 81% and 94%; PC: 82% and 95%. Sensitivity and specificity were also high for KS (87% and 94%, respectively, but sensitivity was < 60% for HL and oral warts in all sites combined. The Candida culture confirmation of OC clinical diagnoses (as defined by ≥ 1 colony forming unit per mL of oral/throat rinse was ≥ 93% for both PC and EC.Trained non-OHS showed high accuracy of clinical diagnoses of OC in comparison with OHS, suggesting their usefulness in studies in resource-poor settings, but detection of less common

  4. 高精度曲面建模方法的系统构建%System construction of high accuracy surface modeling

    Institute of Scientific and Technical Information of China (English)

    田会; 张承明; 赵娜; 岳天祥

    2015-01-01

    High Accuracy Surface Modeling method(HASM)is a kind of curved surface modeling method based on the theory of differential geometry surfaces. Large number of numerical tests show that the simulation accuracy of HASM is higher than that of classical interpolation methods such as Kriging, IDW and Spline. And it has been successfully applied to the soil properties surface modeling, the temperature and precipitation, DEM construction and ecosystem changes, etc. Since the current HASM programs are mostly developed by Matlab, C++and Fortran, and it is subjected to the limitations of the development tools, there isn’t a convenient graphical interface for users, which blocks the popularization and applica-tion of the method. To solve this problem, this paper builds the HASM modeling system based on windows forms using Visual Studio as tools with C# language, and makes some numerical tests. The results demonstrate the effectiveness of the system.%高精度曲面建模方法(HASM)是一种基于微分几何学曲面理论的曲面建模方法。大量数值实验表明, HASM的模拟精度高于Kriging、IDW、Spline等经典的插值方法,并已成功应用于土壤属性曲面建模、气温要素、DEM构建及生态系统变化趋势等领域。由于目前的HASM程序大多是用Matlab、C++、Fortran等语言开发的,受开发工具的限制,尚没有便于使用的图形界面,阻碍了方法的推广应用。针对这个问题,利用C#语言,在Visual Studio中构建了基于windows窗体的HASM模型系统,并做了一定的数值测试实验,结果表明了该系统的有效性。

  5. Applied Parallel Metadata Indexing

    Energy Technology Data Exchange (ETDEWEB)

    Jacobi, Michael R [Los Alamos National Laboratory

    2012-08-01

    The GPFS Archive is parallel archive is a parallel archive used by hundreds of users in the Turquoise collaboration network. It houses 4+ petabytes of data in more than 170 million files. Currently, users must navigate the file system to retrieve their data, requiring them to remember file paths and names. A better solution might allow users to tag data with meaningful labels and searach the archive using standard and user-defined metadata, while maintaining security. last summer, I developed the backend to a tool that adheres to these design goals. The backend works by importing GPFS metadata into a MongoDB cluster, which is then indexed on each attribute. This summer, the author implemented security and developed the user interfae for the search tool. To meet security requirements, each database table is associated with a single user, which only stores records that the user may read, and requires a set of credentials to access. The interface to the search tool is implemented using FUSE (Filesystem in USErspace). FUSE is an intermediate layer that intercepts file system calls and allows the developer to redefine how those calls behave. In the case of this tool, FUSE interfaces with MongoDB to issue queries and populate output. A FUSE implementation is desirable because it allows users to interact with the search tool using commands they are already familiar with. These security and interface additions are essential for a usable product.

  6. Ranking Secondary Channels for Restoration Using an Index Approach

    Science.gov (United States)

    2012-08-01

    as suckers , minnows, and darters that are relatively intolerant to habitat changes. Backwaters provide nursery areas for both freshwater and...above. The 53 side channels ranged in length from 0.8 to 8.4 miles, the average size was 319 acres, and the maximum size was almost 1134 acres (Table...averaged about 2 miles from the levee with a maximum distance of 8 miles. Table 4. Size of secondary channels used in index development, Lower

  7. Link prediction based on a semi-local similarity index

    Institute of Scientific and Technical Information of China (English)

    Bai Meng; Hu Ke; Tang Yi

    2011-01-01

    Missing link prediction provides significant instruction for both analysis of network structure and mining of unknown links in incomplete networks.Recently,many algorithms have been proposed based on various node-similarity measures.Among these measures,the common neighbour index,the resource allocation index,and the local path index,stemming from different source,have been proved to have relatively high accuracy and low computational effort.In this paper,we propose a similarity index by combining the resource allocation index and the local path index.Simulation results on six unweighted networks show that the accuracy of the proposed index is higher than that of the local path one.Based on the same idea of the present index,we develop its corresponding weighted version and test it on several weighted networks.It is found that,except for the USAir network,the weighted variant also performs better than both the weighted resource allocation index and the weighted local path index.Due to the improved accuracy and the still low computational complexity,the indices may be useful for link prediction.

  8. NNDSS - Table II. Salmonellosis to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Salmonellosis to Shigellosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  9. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  10. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals...

  11. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  12. NNDSS - Table II. Invasive Pneumococcal to Legionellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Invasive Pneumococcal to Legionellosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during...

  13. NNDSS - Table II. Salmonellosis to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Salmonellosis to Shigellosis - 2014. In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases...

  14. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2017. In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  15. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2016. In this Table, provisional* cases of selected†infrequently reported notifiable diseases...

  16. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  17. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2014In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases...

  18. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  19. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  20. NNDSS - Table II. Shiga toxin to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Shiga toxin to Shigellosis - 2015. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  1. NNDSS - Table II. Shiga toxin to Shigellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Shiga toxin to Shigellosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  2. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  3. NNDSS - Table II. Tetanus to Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Vibriosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  4. NNDSS - Table II. Tetanus to Vibriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Vibriosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  5. Global Reference Tables for Management Information Systems.

    Data.gov (United States)

    Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardize code structures and code usage of SSA...

  6. NNDSS - Table II. Ehrlichiosis and Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis and Anaplasmosis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  7. NNDSS - Table II. Legionellosis to Malaria

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Legionellosis to Malaria - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  8. NNDSS - Table II. Tetanus to Varicella

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Tetanus to Varicella - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding year),...

  9. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  10. Water-table contours of Nevada

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This data set consists of water-table contours for Nevada. These data were created as part of an effort to provide statewide information on water table and depth to...

  11. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  12. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases but...

  13. NNDSS - Table II. Hepatitis (viral, acute) C

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) C - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  14. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  15. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2014.In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  16. NNDSS - Table I. infrequently reported notifiable diseases

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table I. infrequently reported notifiable diseases - 2015. In this Table, provisional cases of selected infrequently reported notifiable diseases (<1,000...

  17. Global Reference Tables for Production Systems.

    Data.gov (United States)

    Social Security Administration — This database is a collection of reference tables that store common information used throughout SSA. These tables standardized code structures and code usage of SSA...

  18. A new pattern of the periodic table

    Directory of Open Access Journals (Sweden)

    Brajendra Nath Tripathi

    1962-07-01

    Full Text Available A new pattern of the Periodic Table is described which incorporates all the points for which various models of two or three dimensional tables have been proposed from time to time.

  19. Solar cell efficiency tables (version 50)

    Energy Technology Data Exchange (ETDEWEB)

    Green, Martin A. [Australian Centre for Advanced Photovoltaics, University of New South Wales, Sydney 2052 Australia; Hishikawa, Yoshihiro [National Institute of Advanced Industrial Science and Technology (AIST), Research Center for Photovoltaics (RCPV), Central 2, Umezono 1-1-1, Ibaraki Tsukuba 305-8568 Japan; Warta, Wilhelm [Department: Characterisation and Simulation/CalLab Cells, Fraunhofer-Institute for Solar Energy Systems, Heidenhofstr. 2 Freiburg D-79110 Germany; Dunlop, Ewan D. [European Commission-Joint Research Centre, Directorate C-Energy, Transport and Climate, Via E. Fermi 2749 Ispra IT-21027 VA Italy; Levi, Dean H. [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Hohl-Ebinger, Jochen [Department: Characterisation and Simulation/CalLab Cells, Fraunhofer-Institute for Solar Energy Systems, Heidenhofstr. 2 Freiburg D-79110 Germany; Ho-Baillie, Anita W. H. [Australian Centre for Advanced Photovoltaics, University of New South Wales, Sydney 2052 Australia

    2017-06-21

    Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since January 2017 are reviewed.

  20. Using Generation Tables in Population Biology

    Science.gov (United States)

    Stanley, Melissa

    1974-01-01

    Discusses the use of "generation tables" to demonstrate the effect of age on the size of a population in a biology course for nonscience majors. Included are specified assumptions and conditions for table construction. (CC)

  1. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  2. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases but...

  3. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  4. NNDSS - Table II. Rubella to Salmonellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Rubella to Salmonellosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  5. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2014. In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000...

  6. NNDSS - Table II. Babesiosis to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Coccidioidomycosis - 2014.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  7. NNDSS - Table II. Babesiosis to Campylobacteriosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Babesiosis to Campylobacteriosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  8. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  9. NNDSS - Table II. Ehrlichiosis/Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2014.In this Table, all conditions with a 5-year average annual national total of more than or equals 1,000 cases but...

  10. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  11. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the...

  12. NNDSS - Table II. Ehrlichiosis/Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2015.In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  13. NNDSS - Table II. Meningococcal to Pertussis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Meningococcal to Pertussis - 2017. In this Table, provisional cases of selected notifiable diseases (≥1,000 cases reported during the preceding...

  14. NNDSS - Table II. Lyme disease to Meningococcal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Lyme disease to Meningococcal - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  15. NNDSS - Table II. Hepatitis (viral, acute)

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Hepatitis (viral, acute) - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  16. NNDSS - Table II. Rubella to Salmonellosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Rubella to Salmonellosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  17. NNDSS - Table II. Cryptosporidiosis to Dengue

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Cryptosporidiosis to Dengue - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  18. NNDSS - Table II. Giardiasis to Haemophilus influenza

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Giardiasis to Haemophilus influenza - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  19. NNDSS - Table II. Ehrlichiosis/Anaplasmosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Ehrlichiosis/Anaplasmosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  20. NNDSS - Table II. Chlamydia to Coccidioidomycosis

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Chlamydia to Coccidioidomycosis - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the...

  1. 21 CFR 890.3750 - Mechanical table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Mechanical table. 890.3750 Section 890.3750 Food... DEVICES PHYSICAL MEDICINE DEVICES Physical Medicine Prosthetic Devices § 890.3750 Mechanical table. (a) Identification. A mechanical table is a device intended for medical purposes that has a flat surface that can...

  2. The Different Periodic Tables of Dmitrii Mendeleev

    Science.gov (United States)

    Laing, Michael

    2008-01-01

    Between 1869 and 1905 the Russian chemist Dmitrii Mendeleev published several tables with different arrangements of the chemical elements. Four of these are compared with periodic tables by Russian scientists from 1934 and 1969. The difficulties caused by the lanthanoid elements are clearly seen in the table of 1905, which satisfactorily includes…

  3. Cohort Working Life Tables for Older Canadians

    Directory of Open Access Journals (Sweden)

    Frank T. Denton

    2010-12-01

    those based on the period tables, for both men and women, and that is reflected in increased retirement expectancies. For example, a male aged 50 in 1976 could have expected to live three years longer and to have almost four more years in retirement, based on the male cohort table under medium assumptions, as compared with the corresponding period table.

  4. Authenticated hash tables

    DEFF Research Database (Denmark)

    Triandopoulos, Nikolaos; Papamanthou, Charalampos; Tamassia, Roberto

    2008-01-01

    Hash tables are fundamental data structures that optimally answer membership queries. Suppose a client stores n elements in a hash table that is outsourced at a remote server so that the client can save space or achieve load balancing. Authenticating the hash table functionality, i.e., verifying ...

  5. The Different Periodic Tables of Dmitrii Mendeleev

    Science.gov (United States)

    Laing, Michael

    2008-01-01

    Between 1869 and 1905 the Russian chemist Dmitrii Mendeleev published several tables with different arrangements of the chemical elements. Four of these are compared with periodic tables by Russian scientists from 1934 and 1969. The difficulties caused by the lanthanoid elements are clearly seen in the table of 1905, which satisfactorily includes…

  6. Cryogenic Refractive Index of Heraeus Homosil Glass

    Science.gov (United States)

    Miller, Kevin H.; Quijada, Manuel A.; Leviton, Douglas B.

    2017-01-01

    This paper reports measurements of the refractive index of Homosil (Heraeus) over the wavelength range of 0.343.16 m and temperature range of 120335 K. These measurements were performed by using the Cryogenic High Accuracy Refraction Measuring System (CHARMS) facility at the NASAs Goddard Space Flight Center. These measurements were in support of an integrated Structural-Thermal-Optical-Performance (STOP) model that was developed for a field-widened Michelson interferometer that is being built and tested for the High Spectral Resolution Lidar (HSRL) project at the NASA Langley Research Center (LaRC). The cryogenic refractive index measurements were required in order to account for the highly sensitivity performance of the HSRL instrument to changes in refractive index with temperature, temperature gradients, thermal expansion, and deformation due to mounting stresses. A dense coverage of the absolute refractive index over the aforementioned wavelength and temperature ranges was used to determine the thermo-optic coefficient (dndT) and dispersion relation (dnd) as a function of wavelength and temperature. Our measurements of Homosil will be compared with measurements of other glasses from the fused silica family studied in CHARMS as well as measurements reported elsewhere in literature.

  7. Managing Restaurant Tables using Constraints

    Science.gov (United States)

    Vidotto, Alfio; Brown, Kenneth N.; Beck, J. Christopher

    Restaurant table management can have significant impact on both profitability and the customer experience. The core of the issue is a complex dynamic combinatorial problem. We show how to model the problem as constraint satisfaction, with extensions which generate flexible seating plans and which maintain stability when changes occur. We describe an implemented system which provides advice to users in real time. The system is currently being evaluated in a restaurant environment.

  8. Two Problems with Table Saws

    Science.gov (United States)

    Vautaw, William R.

    2008-01-01

    We solve two problems that arise when constructing picture frames using only a table saw. First, to cut a cove running the length of a board (given the width of the cove and the angle the cove makes with the face of the board) we calculate the height of the blade and the angle the board should be turned as it is passed over the blade. Second, to…

  9. Putting food on the table

    OpenAIRE

    2016-01-01

    Putting food on the table: the European Union governance of the wicked problem of food security Jeroen Candel Food security concerns and arguments have made a revival in European Union (EU) governance since the 2007-8 and 2010 global food price crises. This renaissance of food security has been accompanied by increasing awareness among scholars and policymakers about high degrees of complexity, uncertainty, controversy, and cross-scale dynamics surrounding food security as well as consequent ...

  10. The pharmacological tables of Rhazes.

    Science.gov (United States)

    Kahl, Oliver

    2011-01-01

    This article deals with the 22nd volume of Muḥammad ibn Zakarīyāʾ al-Rāzīʾs (Rhazes, d. 313/925) medical encyclopedia al-Ḥāwī fī l-ṭibb. Volume twenty-two is dedicated to pharmacology and pharmacological tables, and introduced by a short treatise in which Rhazes explains his unusual choice of tabular design and terminological arrangement. Following upon a brief bio-bibliographical survey and forming the core of this article, Rhazesʾ introductory treatise is re-edited here in the original Arabic and further made accessible through an annotated English translation. Edition and translation, in turn, are followed by a detailed study of both the treatise and the tables, including explanatory diagrams, statistical evaluations, a source-critical analysis, and some observations regarding the tradition of synoptic tables in Arabic pharmaceutical literature — thus gradually emerges the conceptual originality of Rhazesʾ implementation, and new light is thrown on his broad linguistic interests and abilities. The article concludes with an excursion into the realm of Persian-Chinese intellectual exchange, suggesting the possibility of a stimulus to Rhazesʾ imagination from a remote and otherwise mostly hidden corner.

  11. 1991 OCRWM bulletin compilation and index

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1992-05-01

    The OCRWM Bulletin is published by the Department of Energy, Office of Civilian Radioactive Waste Management, to provide current information about the national program for managing spent fuel and high-level radioactive waste. The document is a compilation of issues from the 1991 calendar year. A table of contents and an index have been provided to reference information contained in this year`s Bulletins.

  12. Effective palette indexing for image compression using self-organization of Kohonen feature map.

    Science.gov (United States)

    Pei, Soo-Chang; Chuang, Yu-Ting; Chuang, Wei-Hong

    2006-09-01

    The process of limited-color image compression usually involves color quantization followed by palette re-indexing. Palette re-indexing could improve the compression of color-indexed images, but it is still complicated and consumes extra time. Making use of the topology-preserving property of self-organizing Kohonen feature map, we can generate a fairly good color index table to achieve both high image quality and high compression, without re-indexing. Promising experiment results will be presented.

  13. The Kepler False Positive Table

    Science.gov (United States)

    Bryson, Steve; Kepler False Positive Working Group

    2015-01-01

    The Kepler Space Telescope has detected thousands of candidate exoplanets by observing transit signals in a sample of more than 190,000 stars. Many of these transit signals are false positives, defined as a transit-like signal that is not due to a planet orbiting the target star (or a bound companion if the target is a multiple-star system). Astrophysical causes of false positives include background eclipsing binaries, planetary transits not associated with the target star, and non-planetary eclipses of the target star by stellar companions. The fraction of Kepler planet candidates that are false positives ranges from about 10% at high Galactic latitudes to 40% at low Galactic latitudes. Creating a high-reliability planet candidate catalog for statistical studies such as occurrence rate calculations requires removing clearly identified false positives.The Kepler Object of Interest (KOI) catalog at the NExScI NASA Exoplanet Archive flags false positives, and will soon provide a high-level classification of false positives, but lacks detailed description of why a KOI was determined to be a false positive. The Kepler False Positive Working Group (FPWG) examines each false positive in detail to certify that it is correctly identified as a false positive, and determines the primary reason(s) a KOI is classified as a false positive. The work of the FPWG will be published as the Kepler False Positive Table, hosted at the NExScI NASA Exoplanet Archive.The Kepler False Positive Table provides detailed information on the evidence for background binaries, transits caused by stellar companions, and false alarms. In addition to providing insight into the Kepler false positive population, the false positive table gives information about the background binary population and other areas of astrophysical interest. Because a planet around a star not associated with the target star is considered a false positive, the false positive table likely contains further planet candidates

  14. Dose measurement for systemic irradiation with a moving table specially designed for total body irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Oda, Makoto; Oida, Masatada; Nagumo, Junya; Fujita, Katsuhisa; Furuya, Teruo; Watanabe, Yoshiharu [Hokkaido Univ., Sapporo (Japan). Hospital

    2001-07-01

    Total body irradiation (TBI) is performed in combination with chemotherapy to kill malignant tumor cells in the body prior to bone marrow transplantation. This study reports the results of dose measurements required for clinical application of the moving table technique to TBI. Since irradiation is performed as the table moves, the authors gathered sufficient basic data for irradiation by measuring output dose, tissue peak dose ratio (TPR), and the relationship between dose rate and movement velocity. The output doses were varied according to dose rate, movement velocity, radiation field, and source-target distance (STD) under these conditions. The authors measured the relationship between the dose rate and the movement velocity with the irradiation field and STD set to fit clinical applications. TPR during irradiation while moving differs from TPR during stationary irradiation, and it was measured according to the method of irradiation. The effect of body thickness was easily corrected by changing the movement velocity during the measurements. The authors measured the dose with a thermoluminescent dosimeter (TLD) during clinical application and confirmed the accuracy of the measurements. TBI with the moving table, it makes possible to perform bilateral irradiation in both posterior-anterior and anterior-posterior directions with the patient in the supine position, to reduce treatment time, to shield the lung well with reproducibility of posture, and to treat with high accuracy. (K.H.)

  15. Equations of State for Mixtures: Results from DFT Simulations of Xenon/Ethane Mixtures Compared to High Accuracy Validation Experiments on Z

    Science.gov (United States)

    Magyar, Rudolph

    2013-06-01

    We report a computational and validation study of equation of state (EOS) properties of liquid / dense plasma mixtures of xenon and ethane to explore and to illustrate the physics of the molecular scale mixing of light elements with heavy elements. Accurate EOS models are crucial to achieve high-fidelity hydrodynamics simulations of many high-energy-density phenomena such as inertial confinement fusion and strong shock waves. While the EOS is often tabulated for separate species, the equation of state for arbitrary mixtures is generally not available, requiring properties of the mixture to be approximated by combining physical properties of the pure systems. The main goal of this study is to access how accurate this approximation is under shock conditions. Density functional theory molecular dynamics (DFT-MD) at elevated-temperature and pressure is used to assess the thermodynamics of the xenon-ethane mixture. The simulations are unbiased as to elemental species and therefore provide comparable accuracy when describing total energies, pressures, and other physical properties of mixtures as they do for pure systems. In addition, we have performed shock compression experiments using the Sandia Z-accelerator on pure xenon, ethane, and various mixture ratios thereof. The Hugoniot results are compared to the DFT-MD results and the predictions of different rules for combing EOS tables. The DFT-based simulation results compare well with the experimental points, and it is found that a mixing rule based on pressure equilibration performs reliably well for the mixtures considered. Sandia National Laboratories is a multi-program laboratory managed and operated by Sandia Corporation, a wholly owned subsidiary of Lockheed Martin Corporation, for the U.S. Department of Energy's National Nuclear Security Administration under contract DE-AC04-94AL85000.

  16. Video Analytics for Indexing, Summarization and Searching of Video Archives

    Energy Technology Data Exchange (ETDEWEB)

    Trease, Harold E.; Trease, Lynn L.

    2009-08-01

    This paper will be submitted to the proceedings The Eleventh IASTED International Conference on. Signal and Image Processing. Given a video or video archive how does one effectively and quickly summarize, classify, and search the information contained within the data? This paper addresses these issues by describing a process for the automated generation of a table-of-contents and keyword, topic-based index tables that can be used to catalogue, summarize, and search large amounts of video data. Having the ability to index and search the information contained within the videos, beyond just metadata tags, provides a mechanism to extract and identify "useful" content from image and video data.

  17. Developing of the New Type High Accuracy Airborne Gravimetry System%新型高精度航空重力勘察系统研制

    Institute of Scientific and Technical Information of China (English)

    吴美平; 张开东; 曹聚亮; 洪华杰; 周锡华

    2016-01-01

    10 years. Through the rearch work in “11.5” , National University of Defense Technology(NUDT) had accumulated much experience on the hardware design, software desigh, system integration, data processing and applications of strapdown gravimetry, the principle prototype designed by NUDT has rearched the advanced level among the same type gravimeters. The goals of this project include that breaking through the key technologies restricted the high accuracy gravimetry, and developing the airborne gravimetry system that can meet the requirement of the reconnaissance of oil and mine, and the accuracy reaching the advanced level of commercial products. The anticipate accuracy is better than 1mGal at the resolution of 3km, and we also need to fullfill demonstrate production more than 100,000km. This report introduced the background of the project, foundation, and the scheme to realize the goal.

  18. Pseudomonas fluorescens' view of the periodic table.

    Science.gov (United States)

    Workentine, Matthew L; Harrison, Joe J; Stenroos, Pernilla U; Ceri, Howard; Turner, Raymond J

    2008-01-01

    Growth in a biofilm modulates microbial metal susceptibility, sometimes increasing the ability of microorganisms to withstand toxic metal species by several orders of magnitude. In this study, a high-throughput metal toxicity screen was initiated with the aim of correlating biological toxicity data in planktonic and biofilm cells to the physiochemical properties of metal ions. To this end, Pseudomonas fluorescens ATCC 13525 was grown in the Calgary Biofilm Device (CBD) and biofilms and planktonic cells of this microorganism were exposed to gradient arrays of different metal ions. These arrays included 44 different metals with representative compounds that spanned every group of the periodic table (except for the halogens and noble gases). The minimum inhibitory concentration (MIC), minimum bactericidal concentration (MBC) and minimum biofilm eradication concentration (MBEC) values were obtained after exposing the biofilms to metal ions for 4 h. Using these values, metal ion toxicity was correlated to the following ion-specific physicochemical parameters: standard reduction-oxidation potential, electronegativity, the solubility product of the corresponding metal-sulfide complex, the Pearson softness index, electron density and the covalent index. When the ions were grouped according to outer shell electron structure, we found that heavy metal ions gave the strongest correlations to these parameters and were more toxic on average than the other classes of the ions. Correlations were different for biofilms than for planktonic cells, indicating that chemical mechanisms of metal ion toxicity differ between the two modes of growth. We suggest that biofilms can specifically counter the toxic effects of certain physicochemical parameters, which may contribute to the increased ability of biofilms to withstand metal toxicity.

  19. 关于高精度12参矩形板元的分析%Analysis on a Set of 12-parameter Rectangular Plate Element with High Accuracy

    Institute of Scientific and Technical Information of China (English)

    石东洋; 王彩霞

    2006-01-01

    It is proved that the so-called a set of 12-parameter rectangular plate elements with high accuracy constructed by using double set parameter method and undetermined method are, in fact, the same one; the real shape function space is nothing but the Adini's element's, which has nothing to do with the other high degree terms and leads to a new method for constructing the high accuracy plate elements. This fact has never been seen for other conventional and unconventional, conforming and nonconforming rectangular plate elements, such as Quasi-conforming elements, generalized conforming elements and other double set parameter finite elements. Moreover, such kind of rectangular elements can not be constructed by the conventional finite element methods.

  20. The structure characteristic and technical performance of high accuracy twin spindle turning-milling center%一种精密双主轴车铣中心的结构特点与技术性能

    Institute of Scientific and Technical Information of China (English)

    李林; 陈梅

    2013-01-01

    研制了一种高精度、高速度、高柔性等特点的六轴四联动的双主轴车铣中心,介绍机床的总体结构布局,主要机械结构、特点、技术参数.该机床是解决高精度复杂回转零件加工的理想设备.%This paper introduces six axes with four axes simultaneous motion twin spindle turning-milling center with the characteristic of high accuracy, high speed and high flexibility, describes the total structural arrangement , the main mechanical structure, characteristic and the main technical data of the machine. This machine is a ideal equipment for machining the complex turn round spares with high accuracy.

  1. Index and Indexing Assessment: Criteria and Standards

    Directory of Open Access Journals (Sweden)

    Hassan Ashrafi

    2007-10-01

    Full Text Available Indexing is one of the most important methods of content representation where by assigning descriptors to the documents, their subject content are made known. Since index and indexing are remarkably significant in information retrieval, its quality and evaluation and provision of criteria and standards had always been the mainstay of researchers in this field. Given the fact that Indexing is a complex process, offering definitions, principles and methods could be step towards optimal use of the information. The present study, while offering a capsule definition of index, will investigate the indexing evaluation criteria and would follow it up with a definition of indexing. Finally a number of standards in the field of indexing are presented and would make its conclusions.

  2. James Webb Space Telescope Integrated Science Instrument Module Calibration and Verification of High-Accuracy Instrumentation to Measure Heat Flow in Cryogenic Testing

    Science.gov (United States)

    Comber, Brian; Glazer, Stuart

    2012-01-01

    The James Webb Space Telescope (JWST) is an upcoming flagship observatory mission scheduled to be launched in 2018. Three of the four science instruments are passively cooled to their operational temperature range of 36K to 40K, and the fourth instrument is actively cooled to its operational temperature of approximately 6K. The requirement for multiple thermal zoned results in the instruments being thermally connected to five external radiators via individual high purity aluminum heat straps. Thermal-vacuum and thermal balance testing of the flight instruments at the Integrated Science Instrument Module (ISIM) element level will take place within a newly constructed shroud cooled by gaseous helium inside Goddard Space Flight Center's (GSFC) Space environment Simulator (SES). The flight external radiators are not available during ISIM-level thermal vacuum/thermal testing, so they will be replaced in test with stable and adjustable thermal boundaries with identical physical interfaces to the flight radiators. Those boundaries are provided by specially designed test hardware which also measures the heat flow within each of the five heat straps to an accuracy of less than 2 mW, which is less than 5% of the minimum predicted heat flow values. Measurement of the heat loads to this accuracy is essential to ISIM thermal model correlation, since thermal models are more accurately correlated when temperature data is supplemented by accurate knowledge of heat flows. It also provides direct verification by test of several high-level thermal requirements. Devices that measure heat flow in this manner have historically been referred to a "Q-meters". Perhaps the most important feature of the design of the JWST Q-meters is that it does not depend on the absolute accuracy of its temperature sensors, but rather on knowledge of precise heater power required to maintain a constant temperature difference between sensors on two stages, for which a table is empirically developed during a

  3. Table-top job analysis

    Energy Technology Data Exchange (ETDEWEB)

    1994-12-01

    The purpose of this Handbook is to establish general training program guidelines for training personnel in developing training for operation, maintenance, and technical support personnel at Department of Energy (DOE) nuclear facilities. TTJA is not the only method of job analysis; however, when conducted properly TTJA can be cost effective, efficient, and self-validating, and represents an effective method of defining job requirements. The table-top job analysis is suggested in the DOE Training Accreditation Program manuals as an acceptable alternative to traditional methods of analyzing job requirements. DOE 5480-20A strongly endorses and recommends it as the preferred method for analyzing jobs for positions addressed by the Order.

  4. Image indexing using color correlograms

    Science.gov (United States)

    Huang, Jing; Kumar, Shanmugasundaram Ravi; Mitra, Mandar; Zhu, Wei-Jing

    2001-01-01

    A color correlogram is a three-dimensional table indexed by color and distance between pixels which expresses how the spatial correlation of color changes with distance in a stored image. The color correlogram may be used to distinguish an image from other images in a database. To create a color correlogram, the colors in the image are quantized into m color values, c.sub.i . . . c.sub.m. Also, the distance values k.epsilon.[d] to be used in the correlogram are determined where [d] is the set of distances between pixels in the image, and where dmax is the maximum distance measurement between pixels in the image. Each entry (i, j, k) in the table is the probability of finding a pixel of color c.sub.i at a selected distance k from a pixel of color c.sub.i. A color autocorrelogram, which is a restricted version of the color correlogram that considers color pairs of the form (i,i) only, may also be used to identify an image.

  5. A table-top LHC

    CERN Multimedia

    Barbara Warmbein

    2011-01-01

    Many years ago, when ATLAS was no more than a huge empty underground cavern and Russian artillery shell casings were being melted down to become part of the CMS calorimetry system, science photographer Peter Ginter started documenting the LHC’s progress. He was there when special convoys of equipment crossed the Jura at night, when cranes were lowering down detector slices and magnet coils were being wound in workshops. Some 18 years of LHC history have been documented by Ginter, and the result has just come out as a massive coffee table book full of double-page spreads of Ginter’s impressive images.   The new coffee table book, LHC: the Large Hadron Collider. Published by the Austrian publisher Edition Lammerhuber in cooperation with CERN and UNESCO Publishing, LHC: the Large Hadron Collider is an unusual piece in the company’s portfolio. As the publisher’s first science book, LHC: the Large Hadron Collider weighs close to five kilos and comes in a s...

  6. CONSUMER PREFERENCES FOR TABLE OLIVES IN TIRANA

    Directory of Open Access Journals (Sweden)

    Elvina Merkaj

    2012-06-01

    Full Text Available Table olive production sector is undergoing rapid changes, as the government is undertaking an ambitious program supporting the expansion of olive grove plantations. Despite the increase in domestic production, import of table olive is still high, due to constraints in quantity and quality of domestically supplied olives. In the context of import substitution strategy, embraced by producers and policy-makers, it is important to analyze the consumer preferences for table olives. The objective of this paper is to segment the table olive market according to preferences for table olives attributes applying Conjoint Choice Experiment (CCE and Latent Class Analysis to collect and analyze the data. The research results show a strong consumer preference for domestic table olives whereas preferences for other attributes vary between consumer groups.

  7. EJSCREEN Indexes 2015 Internal

    Data.gov (United States)

    U.S. Environmental Protection Agency — There is an EJ Index for each environmental indicator. There are 12 EJ Indexes in EJSCREEN reflecting the 12 environmental indicators. The EJ Index names are:...

  8. EJSCREEN Indexes 2016 Public

    Data.gov (United States)

    U.S. Environmental Protection Agency — There is an EJ Index for each environmental indicator. There are eleven EJ Indexes in EJSCREEN reflecting the 11 environmental indicators. The EJ Index names are:...

  9. EJSCREEN Indexes 2015 Public

    Data.gov (United States)

    U.S. Environmental Protection Agency — There is an EJ Index for each environmental indicator. There are eight EJ Indexes in EJSCREEN reflecting the 8 environmental indicators. The EJ Index names are:...

  10. Environmental Regulatory Update Table, December 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1992-01-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  11. Environmental Regulatory Update Table, December 1989

    Energy Technology Data Exchange (ETDEWEB)

    Houlbert, L.M.; Langston, M.E. (Tennessee Univ., Knoxville, TN (USA)); Nikbakht, A.; Salk, M.S. (Oak Ridge National Lab., TN (USA))

    1990-01-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  12. Environmental Regulatory Update Table, November 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-12-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  13. Environmental Regulatory Update Table, August 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M., Hawkins, G.T.; Salk, M.S.

    1991-09-01

    This Environmental Regulatory Update Table (August 1991) provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  14. Environmental Regulatory Update Table, September 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-10-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  15. Environmental Regulatory Update Table, October 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-11-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  16. Environmental Regulatory Update Table, April 1989

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-05-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  17. Environmental Regulatory Update Table, April 1989

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-05-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  18. Thermodynamic tables to accompany Modern engineering thermodynamics

    CERN Document Server

    Balmer, Robert T

    2011-01-01

    This booklet is provided at no extra charge with new copies of Balmer's Modern Engineering Thermodynamics. It contains two appendices. Appendix C contains 40 thermodynamic tables, and Appendix D consists of 6 thermodynamic charts. These charts and tables are provided in a separate booklet to give instructors the flexibility of allowing students to bring the tables into exams. The booklet may be purchased separately if needed.

  19. Environmental regulatory update table, March 1989

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.; Langston, M.E.; Nikbakht, A.; Salk, M.S.

    1989-04-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  20. Environmental Regulatory Update Table, November 1991

    Energy Technology Data Exchange (ETDEWEB)

    Houlberg, L.M.; Hawkins, G.T.; Salk, M.S.

    1991-12-01

    The Environmental Regulatory Update Table provides information on regulatory initiatives of interest to DOE operations and contractor staff with environmental management responsibilities. The table is updated each month with information from the Federal Register and other sources, including direct contact with regulatory agencies. Each table entry provides a chronological record of the rulemaking process for that initiative with an abstract and a projection of further action.

  1. CRC standard mathematical tables and formulae

    CERN Document Server

    Zwillinger, Daniel

    2002-01-01

    New in the 31st edition:Game theory and voting powerHeuristic search techniquesQuadratic fieldsReliabilityRisk analysis and decision rulesA table of solutions to Pell's equationA table of irreducible polynomials in Z2[x]An interpretation of powers of 10A collection of ""proofs without words""Representations of groups of small orderCounting principlesTesselations and tilings…and much more!An indispensable, up-to-date resource, CRC Standard Mathematical Tables and Formulae, 31st Edition makes it effortless to find the equations, tables, and formulae you need most often.

  2. Solar cell efficiency tables (version 48): Solar cell efficiency tables (version 48)

    Energy Technology Data Exchange (ETDEWEB)

    Green, Martin A. [Australian Centre for Advanced Photovoltaics, University of New South Wales, Sydney New South Wales 2052 Australia; Emery, Keith [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Hishikawa, Yoshihiro [Research Center for Photovoltaics (RCPV), National Institute of Advanced Industrial Science and Technology (AIST), Central 2, Umezono 1-1-1 Tsukuba Ibaraki 305-8568 Japan; Warta, Wilhelm [Characterisation and Simulation/CalLab Cells, Fraunhofer Institute for Solar Energy Systems, Heidenhofstr. 2 D-79110 Freiburg Germany; Dunlop, Ewan D. [European Commission - Joint Research Centre, Renewable Energy Unit, Institute for Energy, Via E. Fermi 2749 IT-21027 Ispra VA Italy

    2016-06-17

    Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since January 2016 are reviewed.

  3. Solar cell efficiency tables (version 49): Solar cell efficiency tables (version 49)

    Energy Technology Data Exchange (ETDEWEB)

    Green, Martin A. [Australian Centre for Advanced Photovoltaics, University of New South Wales, Sydney NSW 2052 Australia; Emery, Keith [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Hishikawa, Yoshihiro [Research Center for Photovoltaics (RCPV), National Institute of Advanced Industrial Science and Technology (AIST), Central 2, Umezono 1-1-1 Tsukuba Ibaraki 305-8568 Japan; Warta, Wilhelm [Department: Characterisation and Simulation/CalLab Cells, Fraunhofer-Institute for Solar Energy Systems, Heidenhofstr. 2 D-79110 Freiburg Germany; Dunlop, Ewan D. [Renewable Energy Unit, Institute for Energy, European Commission-Joint Research Centre, Via E. Fermi 2749 IT-21027 Ispra (VA) Italy; Levi, Dean H. [National Renewable Energy Laboratory, 15013 Denver West Parkway Golden CO 80401 USA; Ho-Baillie, Anita W. Y. [Australian Centre for Advanced Photovoltaics, University of New South Wales, Sydney NSW 2052 Australia

    2016-11-28

    Consolidated tables showing an extensive listing of the highest independently confirmed efficiencies for solar cells and modules are presented. Guidelines for inclusion of results into these tables are outlined, and new entries since June 2016 are reviewed.

  4. A periodic table for cancer.

    Science.gov (United States)

    Epstein, Richard J

    2015-01-01

    Cancers exhibit differences in metastatic behavior and drug sensitivity that correlate with certain tumor-specific variables such as differentiation grade, growth rate/extent and molecular regulatory aberrations. In practice, patient management is based on the past results of clinical trials adjusted for these biomarkers. Here, it is proposed that treatment strategies could be fine-tuned upfront simply by quantifying tumorigenic spatial (cell growth) and temporal (genetic stability) control losses, as predicted by genetic defects of cell-cycle-regulatory gatekeeper and genome-stabilizing caretaker tumor suppressor genes, respectively. These differential quantifications of tumor dysfunction may in turn be used to create a tumor-specific 'periodic table' that guides rational formulation of survival-enhancing anticancer treatment strategies.

  5. Breaking GSM with rainbow Tables

    CERN Document Server

    Meyer, Steven

    2011-01-01

    Since 1998 the GSM security has been academically broken but no real attack has ever been done until in 2008 when two engineers of Pico Computing (FPGA manufacture) revealed that they could break the GSM encryption in 30 seconds with 200'000$ hardware and precomputed rainbow tables. Since then the hardware was either available for rich people only or was confiscated by government agencies. So Chris Paget and Karsten Nohl decided to react and do the same thing but in a distributed open source form (on torrent). This way everybody could "enjoy" breaking GSM security and operators will be forced to upgrade the GSM protocol that is being used by more than 4 billion users and that is more than 20 years old.

  6. Table manipulation in simplicial databases

    CERN Document Server

    Spivak, David I

    2010-01-01

    In \\cite{Spi}, we developed a category of databases in which the schema of a database is represented as a simplicial set. Each simplex corresponds to a table in the database. There, our main concern was to find a categorical formulation of databases; the simplicial nature of the schemas was to some degree unexpected and unexploited. In the present note, we show how to use this geometric formulation effectively on a computer. If we think of each simplex as a polygonal tile, we can imagine assembling custom databases by mixing and matching tiles. Queries on this database can be performed by drawing paths through the resulting tile formations, selecting records at the start-point of this path and retrieving corresponding records at its end-point.

  7. The Consumer Price Index and Salary Negotiations. Research Reports.

    Science.gov (United States)

    Mitchell, Carolyn S.

    1975-01-01

    This report discusses use of the Consumer Price Index (CPI) to compute cost-of-living adjustments for wages and salaries in general and teachers' salaries in particular. A number of tables and graphs compare average annual salary increases for Connecticut teachers in 1967-74 with annual increases in the national CPI, the Boston area CPI, the New…

  8. Postcoordinate Retrieval: A Comparison of Two Indexing Languages.

    Science.gov (United States)

    Schabas, Ann H.

    1982-01-01

    Reports on a comparative study of the postcoordinate retrieval effectiveness of Library of Congress Subject Headings and the Preserved Context Indexing System (PRECIS). Data are presented in six tables and one figure, and a reference list is included. (Author/JL)

  9. Past, present and future of the speech transmission index

    NARCIS (Netherlands)

    Houtgast, T.; Steeneken, H.J.M.; Wijngaarden, S.J. van

    2002-01-01

    Table of contents Tammo's and Herman's Index. An introduction by Manfred R. Schroeder Chapter 1. The roots of the STI approach. Tammo Houtgast and Herman J.M. Steeneken: Introduction - Our first effort - Introduction of STI - Speech envelope spectrum and MTF - Further developments - Envelope modulat

  10. Past, present and future of the speech transmission index

    NARCIS (Netherlands)

    Houtgast, T.; Steeneken, H.J.M.; Wijngaarden, S.J. van

    2002-01-01

    Table of contents Tammo's and Herman's Index. An introduction by Manfred R. Schroeder Chapter 1. The roots of the STI approach. Tammo Houtgast and Herman J.M. Steeneken: Introduction - Our first effort - Introduction of STI - Speech envelope spectrum and MTF - Further developments - Envelope modulat

  11. Radiographic knee osteoarthritis in ex-elite table tennis players

    Directory of Open Access Journals (Sweden)

    Rajabi Reza

    2012-02-01

    Full Text Available Abstract Background Table tennis involves adoption of the semi-flexed knee and asymmetrical torsional trunk movements creating rotational torques on the knee joint which may predispose players to osteoarthritis (OA of the knee. This study aims to compare radiographic signs of knee OA and associated functional levels in ex-elite male table tennis players and control subjects. Methods Study participants were 22 ex-elite male table tennis players (mean age 56.64 ± 5.17 years with 10 years of involvement at the professional level and 22 non-athletic males (mean age 55.63 ± 4.08 years recruited from the general population. A set of three radiographs taken from each knee were evaluated by an experienced radiologist using the Kellgren and Lawrence (KL scale (0-4 to determine radiographic levels of OA severity. The intercondylar distance was taken as a measure of lower limb angulation. Participants also completed the pain, stiffness, and physical function categories of the Western Ontario and McMaster University Osteoarthritis Index (WOMAC 3.1 questionnaire. Results The results showed 78.3% of the ex-elite table tennis players and 36.3% of controls had varying signs of radiographic knee OA with a significant difference in the prevalence levels of definite radiographic OA (KL scale > 2 found between the two groups (P ≤ 0.001. Based on the WOMAC scores, 68.2% of the ex-elite table tennis players reported symptoms of knee pain compared with 27.3% of the controls (p = 0.02 though no significant differences were identified in the mean physical function or stiffness scores between the two groups. In terms of knee alignment, 73.7% of the ex-elite athletes and 32% of the control group had signs of altered lower limb alignment (genu varum (p = 0.01. Statistical differences were found in subjects categorized as having radiographic signs of OA and altered lower limb alignment (p = 0.03. Conclusions Ex-elite table tennis players were found to have increased

  12. Nucleic acid indexing

    Science.gov (United States)

    Guilfoyle, Richard A.; Guo, Zhen

    1999-01-01

    A restriction site indexing method for selectively amplifying any fragment generated by a Class II restriction enzyme includes adaptors specific to fragment ends containing adaptor indexing sequences complementary to fragment indexing sequences near the termini of fragments generated by Class II enzyme cleavage. A method for combinatorial indexing facilitates amplification of restriction fragments whose sequence is not known.

  13. 21 CFR 892.1980 - Radiologic table.

    Science.gov (United States)

    2010-04-01

    ... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Radiologic table. 892.1980 Section 892.1980 Food and Drugs FOOD AND DRUG ADMINISTRATION, DEPARTMENT OF HEALTH AND HUMAN SERVICES (CONTINUED) MEDICAL DEVICES RADIOLOGY DEVICES Diagnostic Devices § 892.1980 Radiologic table. (a) Identification. A radiologic...

  14. Relating Functional Groups to the Periodic Table

    Science.gov (United States)

    Struyf, Jef

    2009-01-01

    An introduction to organic chemistry functional groups and their ionic variants is presented. Functional groups are ordered by the position of their specific (hetero) atom in the periodic table. Lewis structures are compared with their corresponding condensed formulas. (Contains 5 tables.)

  15. Relating Functional Groups to the Periodic Table

    Science.gov (United States)

    Struyf, Jef

    2009-01-01

    An introduction to organic chemistry functional groups and their ionic variants is presented. Functional groups are ordered by the position of their specific (hetero) atom in the periodic table. Lewis structures are compared with their corresponding condensed formulas. (Contains 5 tables.)

  16. Online Periodic Table: A Cautionary Note

    Science.gov (United States)

    Izci, Kemal; Barrow, Lloyd H.; Thornhill, Erica

    2013-01-01

    The purpose of this study was (a) to evaluate ten online periodic table sources for their accuracy and (b) to compare the types of information and links provided to users. Limited studies have been reported on online periodic table (Diener and Moore 2011; Slocum and Moore in "J Chem Educ" 86(10):1167, 2009). Chemistry students'…

  17. Online Periodic Table: A Cautionary Note

    Science.gov (United States)

    Izci, Kemal; Barrow, Lloyd H.; Thornhill, Erica

    2013-01-01

    The purpose of this study was (a) to evaluate ten online periodic table sources for their accuracy and (b) to compare the types of information and links provided to users. Limited studies have been reported on online periodic table (Diener and Moore 2011; Slocum and Moore in "J Chem Educ" 86(10):1167, 2009). Chemistry students'…

  18. ‘Valley Pearl’ table grape

    Science.gov (United States)

    ‘Valley Pearl’ is an early to mid-season, white seedless table grape (Vitis vinifera L.) suitable for commercial table grape production where V. vinifera can be grown. Significant characteristics of ‘Valley Pearl’ are its high and consistent fruit production on spur pruned vines and large round berr...

  19. NNDSS - Table II. Mumps to Rabies, animal

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. Mumps to Rabies, animal - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  20. NNDSS - Table II. West Nile virus disease

    Data.gov (United States)

    U.S. Department of Health & Human Services — NNDSS - Table II. West Nile virus disease - 2016. In this Table, provisional* cases of selected†notifiable diseases (≥1,000 cases reported during the preceding...

  1. 21 CFR 168.180 - Table sirup.

    Science.gov (United States)

    2010-04-01

    ... added for nutritional purposes and artificial sweeteners are not considered to be suitable ingredients... CONSUMPTION SWEETENERS AND TABLE SIRUPS Requirements for Specific Standardized Sweeteners and Table Sirups... percent soluble sweetener solids by weight and is prepared with or without added water. It may contain...

  2. The Development of HMS125p 4-axis Linkage High-accuracy Horizontal Machining Center%HMS125p型四轴联动精密卧式加工中心的研制

    Institute of Scientific and Technical Information of China (English)

    张凯; 刘春时; 李焱; 谢志坤; 王跃武

    2011-01-01

    HMS125p型四轴联动精密卧式加工中心是某公司在现有产品的基础上自主研发的一款大型四轴联动精密卧式加工中心机床.该机床具有高精度、高速度、高刚性、大扭矩等特点,是箱体、壳体等零部件高精、高效加工的理想设备,广泛适用于国防军工、汽车、造船、模具、通用机械等行业.介绍了该机床的主要机械结构特点和技术性能,并对机床整机进行了有限元分析,找出影响机床整机性能的薄弱环节,提出结构设计修改方向,从而使机床具有更好的性能.%HMS125p 4-axis linkage high-accuracy horizontal machining center is designed based on the existing products of some company. This machine which hss" the charaeteristics of high accuracy, high speed, high rigidity and high torque, is a ideal facility for high accuracy and high efficiency machining for box-shaped and shell-shaped parts, and is applied widely in national defence, war industry, automobile, shipment, die and universal mechanical industry etc. The main mechanical characteristics and technical data of the machine were introduced. The FEM analysis to the whale machine was made. The weakest parts that impacted the characteris-tics of the total machine were found. The direction for modification of the structure was presented to make the machine have better characteristics.

  3. 高阶抛物型方程的一族高精度恒稳差分格式%A FAMILY OF ABSOLUTELY STABLE DIFFERENCE SCHEMES OF HIGH ACCURACY FOR SOLVING HIGH ORDER PARABALIC EQUATION

    Institute of Scientific and Technical Information of China (English)

    曾文平

    2003-01-01

    A family of three-layer implicit difference Schemes of high accuracy with two parameters for solving high order parabolic equationδu/δt=(-1)m+1δ2mu/δx2m(where m is positive integers) are constructed. In the special case α=1/2, β=0, We obtain a two-layer difference scheme. These schemes are proved to be absolutely stable for arbiratily chosen non-negative parameters, And the order of the truncation error is O((△t)2+(△x)6). They are shown by numerical examples to be effective, and practice consistant with theoretical analysis.

  4. Generalized Measure of Departure from No Three-Factor Interaction Model for 2 x 2 x K Contingency Tables

    Directory of Open Access Journals (Sweden)

    Yohei Ban

    2008-12-01

    Full Text Available For 2 x 2 x K contingency tables, Tomizawa considered a Shannon entropy type measure to represent the degree of departure from a log-linear model of no three-factor interaction (the NOTFI model. This paper proposes a generalization of Tomizawa's measure for 2 x 2 x K tables. The measure proposed is expressed by using Patil-Taillie diversity index or Cressie-Read power-divergence. A special case of the proposed measure includes Tomizawa's measure. The proposed measure would be useful for comparing the degrees of departure from the NOTFI model in several tables.

  5. Some Reflections on the Periodic Table and Its Use.

    Science.gov (United States)

    Fernelius, W. Conard

    1986-01-01

    Discusses early periodic tables; effect on the periodic table of atomic numbers; the periodic table in relation to electron distribution in the atoms of elements; terms and concepts related to the table; and the modern basis of the periodic table. Additional comments about these and other topics are included. (JN)

  6. Some Reflections on the Periodic Table and Its Use.

    Science.gov (United States)

    Fernelius, W. Conard

    1986-01-01

    Discusses early periodic tables; effect on the periodic table of atomic numbers; the periodic table in relation to electron distribution in the atoms of elements; terms and concepts related to the table; and the modern basis of the periodic table. Additional comments about these and other topics are included. (JN)

  7. Des tables pascales aux tables astronomiques et retour.

    Directory of Open Access Journals (Sweden)

    Max Lejbowicz

    2006-05-01

    Full Text Available L’article étudie la naissance et le développement du calendrier ecclésiastique chrétien, i. e. le comput, depuis les premiers témoignages de la célébration annuelle de la résurrection de Jésus jusqu’aux traductions des tables astronomiques arabes au xiie siècle. Il privilégie les procédures qui aboutissent à la détermination des dates pascales et à leur mise en forme tabulaire. Les analyses sont conduites à partir d’un double point de vue. L’un est scientifique. Il s’appuie sur les données astronomiques retenues par Ptolémée et sur l’apport de la tradition mathématique grecque au calcul par approximations. Les cycles soli-lunaires sont posés à partir des fractions continues et le cycle soli-hebdomadaire à partir du plus petit commun multiple. Le second point de vue est social : l’unification du comput participe à celle de la chrétienté comprise comme une configuration politico-religieuse. Deux conclusions s’imposent. Quelle que soit l’importance que la civilisation médiévale a attribuée au comput, il reste que : 1 / les Pâques sont porteuses de significations irréductibles aux techniques chronométriques qui inscrivent cette fête dans le déroulement de l’année ; 2 / ces techniques ont toutefois marqué profondément les curiosités intellectuelles des Latins et les ont préparé à accueillir avec ferveur les zīj et la numération de position.The article studies the birth and development of the Christian ecclesiastical calendar, i.e. the computus, from the first witnesses to the yearly celebration of the resurrection of Jesus to the translations of arabic astronomical tables in the 12th century. It focuses on the procedures which resulted in determinig the dates of Easter and their being put into tabular form. These analyses were undertaken from two perspectives. One was scientific, relying on the astronomical data preserved by Ptolemy and on the contribution of the Greek mathematical

  8. INTRODUCTION Outline of Round Tables Outline of Round Tables

    Science.gov (United States)

    Abarzhi, Snezhana I.; Sreenivasan, Katepalli R.

    2010-12-01

    The Second International Conference and Advanced School 'Turbulent Mixing and Beyond', TMB-2009, was held at the Abdus Salam International Centre for Theoretical Physics, (ICTP), Trieste, Italy on 27 July-7 August 2009. TMB-2009 united over 180 participants ranging from students to members of the National Academies of Sciences and Engineering, and including researchers at experienced and early stages of their carriers from leading scientific institutions in academia, national laboratories, corporations and industry worldwide. Responding to the community's inquiry and reaffirming the practices established at TMB-2007, two Round Tables were organized for the participants of TMB-2009 on 30 July 2009 and 6 August 2009 in the Oppenheimer Room at the Centre. The goals of the Round Tables were to encourage the information exchange among the members of the interdisciplinary and international TMB community, promote discussions regarding the state-of-the-art in TMB-related scientific areas, identify directions for frontier research, and articulate recommendations for future developments. This article is a summary of the collective work of the Round Table participants (listed alphabetically below by their last names), whose contributions form its substance and, as such, are greatly appreciated. Abarzhi, Snezhana I (University of Chicago, USA) Andrews, Malcolm (Los Alamos National Laboratory, USA) Belotserkovskii, Oleg (Institute for Computer Aided Design of the Russian Academy of Sciences, Russia) Bershadskii, Alexander (ICAR, Israel) Brandenburg, Axel (Nordita, Denmark) Chumakov, Sergei (Stanford University, USA) Desai, Tara (University of Milano-Bicocca, Italy) Galperin, Boris (University of South Florida, USA) Gauthier, Serge (Commissariat à l'Energie Atomique, France) Gekelman, Walter (University of California at Los Angeles, USA) Gibson, Carl (University of California at San Diego, USA) Goddard III, William A (California Institute of Technology, USA) Grinstein, Fernando

  9. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P.; Chantelot, S.; Moisson, N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  10. Isomers chart; Table des isomeres

    Energy Technology Data Exchange (ETDEWEB)

    Dupont-Gautier, P.; Chantelot, S.; Moisson, N. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1967-07-01

    The nuclear isomers are nuclides offering the same mass number and the same atomic number, but different energy levels. In the following chart the zero energy ground states are omitted and the metastable isomers, i.e. of non-zero energy, known and of measurable lifetime, are listed. The lower limit of this lifetime was set here to 0.1 x 10{sup -6} s. The various isomers were classified in increasing lifetimes. (authors) [French] Les isomeres nucleaires sont des nucleides presentant le meme nombre de masse et le meme numero atomique, mais des niveaux energetiques differents. Dans la table suivante, on a neglige les etats fondamentaux d'energie nulle et on a recense les isomeres metastables, c'est-a-dire d'energie non nulle, connus et de periode mesurable. La limite inferieure de cette periode a ete fixee ici a 0,1 x 10{sup -6} s. Les differents isomeres ont ete classes par periodes croissantes. (auteurs)

  11. Three Packets of Minerals of the Periodic Table of Chemical Elements and Chemical Compounds

    OpenAIRE

    Labushev, Mikhail M.

    2013-01-01

    The concepts of alpha- and beta-packets of the periodic table of chemical elements and chemical compounds are defined. The first of the 47 minerals alpha-packets is composed. In it all minerals are arranged in increasing Iav index of proportionality of atomic weights of composing chemical elements, the same way as chemical elements are located in increasing atomic weights in the Periodic table. The packet includes 93 known minerals and two compounds - N2O5 and CO2 - being actually minerals. B...

  12. CENDI Indexing Workshop

    Science.gov (United States)

    1994-01-01

    The CENDI Indexing Workshop held at NASA Headquarters, Two Independence Square, 300 E Street, Washington, DC, on September 21-22, 1994 focused on the following topics: machine aided indexing, indexing quality, an indexing pilot project, the MedIndEx Prototype, Department of Energy/Office of Scientific and Technical Information indexing activities, high-tech coding structures, category indexing schemes, and the Government Information Locator Service. This publication consists mostly of viewgraphs related to the above noted topics. In an appendix is a description of the Government Information Locator Service.

  13. Medicaid Analytic eXtract (MAX) Rx Table Listing

    Data.gov (United States)

    U.S. Department of Health & Human Services — The Statistical Compendium table listing (below) enables users to choose to view Medicaid prescription drug tables for 1999 - 2009, and to select the tables for the...

  14. Medical Expenditure Panel Survey (MEPS) Summary Data Tables

    Data.gov (United States)

    U.S. Department of Health & Human Services — Summary Data Tables Data collected through MEPS are used to generate tables with frequently used summary statistics. These tables are available here for both the...

  15. Water table fluctuation and its effects on vegetation in a semiarid environment

    Directory of Open Access Journals (Sweden)

    L. Duan

    2011-04-01

    Full Text Available A good understanding of water table fluctuation effects on vegetation is crucial for sustaining fragile hydrology and ecology of semiarid areas such as the Horqin Sandy Land (HSL in northern China, but such understanding is not well documented in literature. The objectives of this study were to examine spatio-temporal variations of water table and their effects on vegetation in a semiarid environment. A 9.71 km2 area within the HSL was chosen and well-instrumented to continuously measure hydrometeorologic parameters (e.g., water table. The area comprises of meadow lands and sandy dunes as well as transitional zones in between. In addition to those measured data, this study also used Landsat TM and MODIS imageries and meteorological data at a station near the study area. The spatio-temporal variations were examined using visual plots and contour maps, while the effects on vegetation were determined by overlaying a water table depth map with a vegetation index map derived from the MODIS imageries. The results indicated that water table was mainly dependent on local topography, localized geological settings, and human activities (e.g., reclamation. At annual and monthly scales, water table was mainly a function of precipitation and potential evapotranspiration. A region within the study area where depth to water table was smaller tended to have better (i.e., more dense and productive vegetation cover. Further, the results revealed that water table fluctuation was more sensitive for vegetations in the meadow lands than in the transitional zones, but it was least sensitive for vegetations in the sandy dunes.

  16. Water table fluctuation and its effects on vegetation in a semiarid environment

    Science.gov (United States)

    Duan, L.; Liu, T.; Wang, X.; Luo, Y.; Wang, W.; Liu, X.

    2011-04-01

    A good understanding of water table fluctuation effects on vegetation is crucial for sustaining fragile hydrology and ecology of semiarid areas such as the Horqin Sandy Land (HSL) in northern China, but such understanding is not well documented in literature. The objectives of this study were to examine spatio-temporal variations of water table and their effects on vegetation in a semiarid environment. A 9.71 km2 area within the HSL was chosen and well-instrumented to continuously measure hydrometeorologic parameters (e.g., water table). The area comprises of meadow lands and sandy dunes as well as transitional zones in between. In addition to those measured data, this study also used Landsat TM and MODIS imageries and meteorological data at a station near the study area. The spatio-temporal variations were examined using visual plots and contour maps, while the effects on vegetation were determined by overlaying a water table depth map with a vegetation index map derived from the MODIS imageries. The results indicated that water table was mainly dependent on local topography, localized geological settings, and human activities (e.g., reclamation). At annual and monthly scales, water table was mainly a function of precipitation and potential evapotranspiration. A region within the study area where depth to water table was smaller tended to have better (i.e., more dense and productive) vegetation cover. Further, the results revealed that water table fluctuation was more sensitive for vegetations in the meadow lands than in the transitional zones, but it was least sensitive for vegetations in the sandy dunes.

  17. Visualize Your Data with Google Fusion Tables

    Science.gov (United States)

    Brisbin, K. E.

    2011-12-01

    Google Fusion Tables is a modern data management platform that makes it easy to host, manage, collaborate on, visualize, and publish tabular data online. Fusion Tables allows users to upload their own data to the Google cloud, which they can then use to create compelling and interactive visualizations with the data. Users can view data on a Google Map, plot data in a line chart, or display data along a timeline. Users can share these visualizations with others to explore and discover interesting trends about various types of data, including scientific data such as invasive species or global trends in disease. Fusion Tables has been used by many organizations to visualize a variety of scientific data. One example is the California Redistricting Map created by the LA Times: http://goo.gl/gwZt5 The Pacific Institute and Circle of Blue have used Fusion Tables to map the quality of water around the world: http://goo.gl/T4SX8 The World Resources Institute mapped the threat level of coral reefs using Fusion Tables: http://goo.gl/cdqe8 What attendees will learn in this session: This session will cover all the steps necessary to use Fusion Tables to create a variety of interactive visualizations. Attendees will begin by learning about the various options for uploading data into Fusion Tables, including Shapefile, KML file, and CSV file import. Attendees will then learn how to use Fusion Tables to manage their data by merging it with other data and controlling the permissions of the data. Finally, the session will cover how to create a customized visualization from the data, and share that visualization with others using both Fusion Tables and the Google Maps API.

  18. Scenario-based table top simulations

    DEFF Research Database (Denmark)

    Broberg, Ole; Edwards, Kasper; Nielsen, J.

    2012-01-01

    This study developed and tested a scenario-based table top simulation method in a user-driven innovation setting. A team of researchers worked together with a user group of five medical staff members from the existing clinic. Table top simulations of a new clinic were carried out in a simple model...... including patient scenarios, LEGO figures, shoeboxes, and cardboard. The results indicated that table top simulations is a simple, cheap and powerful tool to generate and test innovative conceptual solutions in the early stages of a design process....

  19. CRC standard mathematical tables and formulae

    CERN Document Server

    Zwillinger, Daniel

    2011-01-01

    With over 6,000 entries, CRC Standard Mathematical Tables and Formulae, 32nd Edition continues to provide essential formulas, tables, figures, and descriptions, including many diagrams, group tables, and integrals not available online. This new edition incorporates important topics that are unfamiliar to some readers, such as visual proofs and sequences, and illustrates how mathematical information is interpreted. Material is presented in a multisectional format, with each section containing a valuable collection of fundamental tabular and expository reference material.New to the 32nd EditionA

  20. Columbia River ESI: INDEX (Index Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector polygons representing the boundaries of all hardcopy cartographic products produced as part of the Environmental Sensitivity Index...

  1. American Samoa ESI: INDEX (Index Polygons)

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This data set contains vector polygons representing the boundaries of all the hardcopy cartographic products produced as part of the Environmental Sensitivity Index...

  2. Human Use Index (Future)

    Data.gov (United States)

    U.S. Environmental Protection Agency — Human land uses may have major impacts on ecosystems, affecting biodiversity, habitat, air and water quality. The human use index (also known as U-index) is the...

  3. Human Use Index

    Data.gov (United States)

    U.S. Environmental Protection Agency — Human land uses may have major impacts on ecosystems, affecting biodiversity, habitat, air and water quality. The human use index (also known as U-index) is the...

  4. Master Veteran Index (MVI)

    Data.gov (United States)

    Department of Veterans Affairs — As of June 28, 2010, the Master Veteran Index (MVI) database based on the enhanced Master Patient Index (MPI) is the authoritative identity service within the VA,...

  5. Audio Indexing for Efficiency

    Science.gov (United States)

    Rahnlom, Harold F.; Pedrick, Lillian

    1978-01-01

    This article describes Zimdex, an audio indexing system developed to solve the problem of indexing audio materials for individual instruction in the content area of the mathematics of life insurance. (Author)

  6. Glycemic index and diabetes

    Science.gov (United States)

    ... this page: //medlineplus.gov/ency/patientinstructions/000941.htm Glycemic index and diabetes To use the sharing features on ... GI diet also may help with weight loss. Glycemic Index of Certain Foods Low GI foods (0 to ...

  7. IndexCat

    Data.gov (United States)

    U.S. Department of Health & Human Services — IndexCat provides access to the digitized version of the printed Index-Catalogue of the Library of the Surgeon General's Office; eTK for medieval Latin texts; and...

  8. Design and Implementation of Automatic Indexing for Information Retrieval with Arabic Documents.

    Science.gov (United States)

    Hmeidi, Ismail; Kanaan, Ghassan; Evens, Martha

    1997-01-01

    Describes automatic information retrieval system designed and built to handle Arabic data. Discusses cost-effectiveness of automatic indexing. Compares retrieval results using words as index terms versus stems and roots. Includes 19 tables; 60 queries using full words and relevance judgments are appended. (JAK)

  9. Unified Index Unveiled

    Institute of Scientific and Technical Information of China (English)

    RENWEI

    2005-01-01

    China unveiled a unified stock index to track both markets in Shanghai and Shenzhen in April, a move likely to open a floodgate for more trading derivatives such as index futures. The new index, with 300 component companies traded on Shanghai and Shenzhen stock exchanges, will be the first of its kind on the mainland. The index members will be the largest 300 stocks - 180 from Shanghai and 120 from Shenzhen - in terms of market capitalization,

  10. Index to Volume 110

    Science.gov (United States)

    Marriott, R. A.

    2001-02-01

    The Subject Index references items under general headings; where a contribution covers two or more clearly defined subjects, each is separately referenced, but otherwise sub-headings within the same topic are not included. Book and other reviews are indexed as such, but their subjects are not further cross-indexed. The Author Index details all named contributions, including talks at Ordinary Meetings, but not questions from the floor.

  11. Indexing Executive Compensation Contracts

    NARCIS (Netherlands)

    I. Dittmann (Ingolf); E.G. Maug (Ernst); O.G. Spalt (Oliver)

    2013-01-01

    textabstractWe analyze the efficiency of indexing executive pay by calibrating the standard model of executive compensation to a large sample of US CEOs. The benefits from linking the strike price of stock options to an index are small and fully indexing all options would increase compensation costs

  12. Textile Index Monitor

    Institute of Scientific and Technical Information of China (English)

    2010-01-01

    Part I–Price Index National Index for China Textile City (located in Keqiao, Shaoxing county in Zhejiang Province, east of China) concludes its price index (periodic code:20101101) at 100.31 points rise of 0.68% as against its previous week.

  13. Textile Index Monitor

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Part I—Price IndexNational Index for China Textile City (located in Keqiao,Shaoxing county in Zhejiang Province,east of China) concludes its price index (periodic code:20110606) at 110.56 points.

  14. Ecological periodic tables: In principle and practice

    Science.gov (United States)

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structure in chemistry, biology and astronomy, respectively, because they are simple, exceptionally useful and they foster the expansion of sci...

  15. Toward an Organic Chemist's Periodic Table.

    Science.gov (United States)

    Hall, H. K., Jr.

    1980-01-01

    An analogy between electron transfer reactions of the elements and those of organic molecules is offered. Examples of organic electron transfer reactions are presented. The rationale of constructing an organic chemists' periodic table is also discussed. (HM)

  16. Theodore William Richards and the Periodic Table

    Science.gov (United States)

    Conant, James B.

    1970-01-01

    Discusses the contribution of Theodore Richards to the accurate determination of atomic weights of copper and other elements; his major contribution was to the building of the definitive periodic table of the elements. (BR)

  17. Map and table of world copper smelters

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This map and table comprise information on 124 world copper smelters (2 of which are closed and 1 of which is under development) and 4 (low-grade solvent...

  18. Cohort Working Life Tables for Older Canadians

    Directory of Open Access Journals (Sweden)

    Spencer, Byron G.

    2010-01-01

    Full Text Available AbstractWe construct cohort working life tables for Canadian men and women aged 50and older and, for comparison, corresponding period tables. The tables arederived using annual single-age time series of participation rates for 1976-2006from the master files of the Statistics Canada Labour Force Survey. The cohortcalculations are based on stochastic projections of mortality coupled withalternative assumptions about future participation rates. Separate tables areprovided for the years 1976, 1991, and 2006, thus spanning a period ofsubstantial gains in life expectancy and strong upward trends in femaleparticipation. Life expectancies based on the cohort tables are greater thanthose based on the period tables, for both men and women, and that is reflectedin increased retirement expectancies. For example, a male aged 50 in 1976could have expected to live three years longer and to have almost four moreyears in retirement, based on the male cohort table under medium assumptions,as compared with the corresponding period table.RésuméNous avons établis des tables de vie active par génération pour les Canadiens etCanadiennes âgés de 50 ans ou plus ainsi que des tables du momentcorrespondantes pour servir de comparaison. Les tables sont dérivées à l'aidede séries chronologiques annuelles d'un seul âge pour le taux d'activité pour lesannées 1976 à 2006 provenant des fichiers maîtres de l'Enquête sur lapopulation active de Statistique Canada. Les calculs par génération sont baséessur des projections stochastiques de mortalité et sur des suppositions quant àde futurs taux d'activité possibles. Des tables séparées ont été établies pour lesannées 1976, 1991 et 2006 ; ce qui représente une période qui a vu des gainssubstantiels en ce qui concerne l'espérance de vie et une forte hausse d'activitéchez les femmes. Les espérance de vie basées sur les tables par génération sontplus élevées que celles basées sur les tables du

  19. The largest table in Chinese restaurant processes

    Institute of Scientific and Technical Information of China (English)

    2009-01-01

    In this paper,we investigate the expectation of the size of the largest table in an(α,θ)-Chinese restaurant process by using and developing an idea originated in the work by Shepp,which discusses random permutation.

  20. The astronomical tables of Giovanni Bianchini

    CERN Document Server

    Chabas, Jose

    2009-01-01

    This book describes and analyses, for the first time, the astronomical tables of Giovanni Bianchini of Ferrara (d. after 1469), explains their context, inserts them into an astronomical tradition that began in Toledo, and addresses their diffusion.

  1. Toward an Organic Chemist's Periodic Table.

    Science.gov (United States)

    Hall, H. K., Jr.

    1980-01-01

    An analogy between electron transfer reactions of the elements and those of organic molecules is offered. Examples of organic electron transfer reactions are presented. The rationale of constructing an organic chemists' periodic table is also discussed. (HM)

  2. Theodore William Richards and the Periodic Table

    Science.gov (United States)

    Conant, James B.

    1970-01-01

    Discusses the contribution of Theodore Richards to the accurate determination of atomic weights of copper and other elements; his major contribution was to the building of the definitive periodic table of the elements. (BR)

  3. Ecological periodic tables: In principle and practice

    Science.gov (United States)

    The chemical periodic table, the Linnaean system of classification and the Hertzsprung-Russell diagram are iconic information organizing structure in chemistry, biology and astronomy, respectively, because they are simple, exceptionally useful and they foster the expansion of sci...

  4. Data Tables - Environments and Contaminants - Contaminated Lands

    Science.gov (United States)

    This document contains a table with the percentage of children ages 0 to 17 years living within one mile of Superfund and Corrective Action sites that may not have all human health protective measures in place in 2009.

  5. Installation Torque Tables for Noncritical Applications

    Science.gov (United States)

    Rivera-Rosario, Hazel T.; Powell, Joseph S.

    2017-01-01

    The objective of this project is to define torque values for bolts and screws when loading is not a concern. Fasteners require a certain torque to fulfill its function and prevent failure. NASA Glenn Research Center did not have a set of fastener torque tables for non-critical applications without loads, usually referring to hand-tight or wrench-tight torqueing. The project is based on two formulas, torque and pullout load. Torque values are calculated giving way to preliminary data tables. Testing is done to various bolts and metal plates, torqueing them until the point of failure. Around 640 torque tables were developed for UNC, UNF, and M fasteners. Different lengths of thread engagement were analyzed for the 5 most common materials used at GRC. The tables were put together in an Excel spreadsheet and then formatted into a Word document. The plan is to later convert this to an official technical publication or memorandum.

  6. New Generation of Los Alamos Opacity Tables

    Science.gov (United States)

    Colgan, James; Kilcrease, D. P.; Magee, N. H.; Sherrill, M. E.; Abdallah, J.; Hakel, P.; Fontes, C. J.; Guzik, J. A.; Mussack, K. A.

    2016-05-01

    We present a new generation of Los Alamos OPLIB opacity tables that have been computed using the ATOMIC code. Our tables have been calculated for all 30 elements from hydrogen through zinc and are publicly available through our website. In this poster we discuss the details of the calculations that underpin the new opacity tables. We also show several recent applications of the use of our opacity tables to solar modeling and other astrophysical applications. In particular, we demonstrate that use of the new opacities improves the agreement between solar models and helioseismology, but does not fully resolve the long-standing `solar abundance' problem. The Los Alamos National Laboratory is operated by Los Alamos National Security, LLC for the National Nuclear Security Administration of the U.S. Department of Energy under Contract No. DE-AC5206NA25396.

  7. Food Composition Tables of Japan and the Nutrient Table/Database.

    Science.gov (United States)

    Watanabe, Tomoko

    2015-01-01

    A global food composition database has been constructed by the United Nations Food and Agriculture Organization (FAO) based on food composition tables from every country in the world. To improve this database, the FAO has organized the International Network of Food Data Systems (INFOODS). The most recent version of the food composition table for Japan was published by the Ministry of Education, Culture, Sports, Science and Technology and is presented in three books: "Standard Tables of Food Composition Japan-2010-," "Fatty Acid Composition of Foods-2005-," and "Amino Acid Composition of Foods-2010-." The Standard Tables of Food Composition in Japan-2015- (Energy, General Components, Minerals, Vitamins, etc. Section; Fatty Acids Section; Amino Acids Section; Carbohydrates Section) will be published in 2015 and is expected to play an important role as one of the main tables of the East Asia food composition tables.

  8. IUPAC Periodic Table of the Isotopes

    Science.gov (United States)

    Holden, N.E.; Coplen, T.B.; Böhlke, J.K.; Wieser, M.E.; Singleton, G.; Walczyk, T.; Yoneda, S.; Mahaffy, P.G.; Tarbox, L.V.

    2011-01-01

    For almost 150 years, the Periodic Table of the Elements has served as a guide to the world of elements by highlighting similarities and differences in atomic structure and chemical properties. To introduce students, teachers, and society to the existence and importance of isotopes of the chemical elements, an IUPAC Periodic Table of the Isotopes (IPTI) has been prepared and can be found as a supplement to this issue.

  9. Listing of Available ACE Data Tables

    Energy Technology Data Exchange (ETDEWEB)

    Conlin, Jeremy Lloyd [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-01-31

    This document is divided into multiple sections. Section 2 lists some of the more frequently used ENDF/B reaction types that can be used with the FM input card. The remaining sections (described below) contain tables showing the available ACE data tables for various types of data. These ACE data libraries are distributed by the Radiation Safety Information Computational Center (RSICC) with MCNP6.

  10. Genetic warfarin dosing: tables versus algorithms.

    Science.gov (United States)

    Finkelman, Brian S; Gage, Brian F; Johnson, Julie A; Brensinger, Colleen M; Kimmel, Stephen E

    2011-02-01

    The aim of this study was to compare the accuracy of genetic tables and formal pharmacogenetic algorithms for warfarin dosing. Pharmacogenetic algorithms based on regression equations can predict warfarin dose, but they require detailed mathematical calculations. A simpler alternative, recently added to the warfarin label by the U.S. Food and Drug Administration, is to use genotype-stratified tables to estimate warfarin dose. This table may potentially increase the use of pharmacogenetic warfarin dosing in clinical practice; however, its accuracy has not been quantified. A retrospective cohort study of 1,378 patients from 3 anticoagulation centers was conducted. Inclusion criteria were stable therapeutic warfarin dose and complete genetic and clinical data. Five dose prediction methods were compared: 2 methods using only clinical information (empiric 5 mg/day dosing and a formal clinical algorithm), 2 genetic tables (the new warfarin label table and a table based on mean dose stratified by genotype), and 1 formal pharmacogenetic algorithm, using both clinical and genetic information. For each method, the proportion of patients whose predicted doses were within 20% of their actual therapeutic doses was determined. Dosing methods were compared using McNemar's chi-square test. Warfarin dose prediction was significantly more accurate (all p algorithm (52%) than with all other methods: empiric dosing (37%; odds ratio [OR]: 2.2), clinical algorithm (39%; OR: 2.2), warfarin label (43%; OR: 1.8), and genotype mean dose table (44%; OR: 1.9). Although genetic tables predicted warfarin dose better than empiric dosing, formal pharmacogenetic algorithms were the most accurate. Copyright © 2011 American College of Cardiology Foundation. Published by Elsevier Inc. All rights reserved.

  11. The drift table: designing for ludic engagement

    OpenAIRE

    2004-01-01

    The Drift Table is an electronic coffee table that displays slowly moving aerial photography controlled by the distribution of weight on its surface. It was designed to investigate our ideas about how technologies for the home could support ludic activities-that is, activities motivated by curiosity, exploration, and reflection rather than externally-defined tasks. The many design choices we made, for example to block or disguise utilitarian functionality, helped to articulate our emerging un...

  12. Analysis in indexing

    DEFF Research Database (Denmark)

    Mai, Jens Erik

    2005-01-01

    is presented as an alternative and the paper discusses how this approach includes a broader range of analyses and how it requires a new set of actions from using this approach; analysis of the domain, users and indexers. The paper concludes that the two-step procedure to indexing is insufficient to explain...... the indexing process and suggests that the domain-centered approach offers a guide for indexers that can help them manage the complexity of indexing. © 2004 Elsevier Ltd. All rights reserved....

  13. High accuracy 3-D laser radar

    DEFF Research Database (Denmark)

    Busck, Jens; Heiselberg, Henning

    2004-01-01

    We have developed a mono-static staring 3-D laser radar based on gated viewing with range accuracy below 1 m at 10 m and 1 cm at 100. We use a high sensitivity, fast, intensified CCD camera, and a Nd:Yag passively Q-switched 32.4 kHz pulsed green laser at 532 nm. The CCD has 752x582 pixels. Camera...

  14. Methodology for high accuracy contact angle measurement.

    Science.gov (United States)

    Kalantarian, A; David, R; Neumann, A W

    2009-12-15

    A new version of axisymmetric drop shape analysis (ADSA) called ADSA-NA (ADSA-no apex) was developed for measuring interfacial properties for drop configurations without an apex. ADSA-NA facilitates contact angle measurements on drops with a capillary protruding into the drop. Thus a much simpler experimental setup, not involving formation of a complete drop from below through a hole in the test surface, may be used. The contact angles of long-chained alkanes on a commercial fluoropolymer, Teflon AF 1600, were measured using the new method. A new numerical scheme was incorporated into the image processing to improve the location of the contact points of the liquid meniscus with the solid substrate to subpixel resolution. The images acquired in the experiments were also analyzed by a different drop shape technique called theoretical image fitting analysis-axisymmetric interfaces (TIFA-AI). The results were compared with literature values obtained by means of the standard ADSA for sessile drops with the apex. Comparison of the results from ADSA-NA with those from TIFA-AI and ADSA reveals that, with different numerical strategies and experimental setups, contact angles can be measured with an accuracy of less than 0.2 degrees. Contact angles and surface tensions measured from drops with no apex, i.e., by means of ADSA-NA and TIFA-AI, were considerably less scattered than those from complete drops with apex. ADSA-NA was also used to explore sources of improvement in contact angle resolution. It was found that using an accurate value of surface tension as an input enhances the accuracy of contact angle measurements.

  15. High accuracy in silico sulfotransferase models.

    Science.gov (United States)

    Cook, Ian; Wang, Ting; Falany, Charles N; Leyh, Thomas S

    2013-11-29

    Predicting enzymatic behavior in silico is an integral part of our efforts to understand biology. Hundreds of millions of compounds lie in targeted in silico libraries waiting for their metabolic potential to be discovered. In silico "enzymes" capable of accurately determining whether compounds can inhibit or react is often the missing piece in this endeavor. This problem has now been solved for the cytosolic sulfotransferases (SULTs). SULTs regulate the bioactivities of thousands of compounds--endogenous metabolites, drugs and other xenobiotics--by transferring the sulfuryl moiety (SO3) from 3'-phosphoadenosine 5'-phosphosulfate to the hydroxyls and primary amines of these acceptors. SULT1A1 and 2A1 catalyze the majority of sulfation that occurs during human Phase II metabolism. Here, recent insights into the structure and dynamics of SULT binding and reactivity are incorporated into in silico models of 1A1 and 2A1 that are used to identify substrates and inhibitors in a structurally diverse set of 1,455 high value compounds: the FDA-approved small molecule drugs. The SULT1A1 models predict 76 substrates. Of these, 53 were known substrates. Of the remaining 23, 21 were tested, and all were sulfated. The SULT2A1 models predict 22 substrates, 14 of which are known substrates. Of the remaining 8, 4 were tested, and all are substrates. The models proved to be 100% accurate in identifying substrates and made no false predictions at Kd thresholds of 100 μM. In total, 23 "new" drug substrates were identified, and new linkages to drug inhibitors are predicted. It now appears to be possible to accurately predict Phase II sulfonation in silico.

  16. Compact, High Accuracy CO2 Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovative Research Phase II proposal seeks to develop a low cost, robust, highly precise and accurate CO2 monitoring system. This system will...

  17. Compact, High Accuracy CO2 Monitor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This Small Business Innovative Research Phase I proposal seeks to develop a low cost, robust, highly precise and accurate CO2 monitoring system. This system will...

  18. Fast and High Accuracy Wire Scanner

    CERN Document Server

    Koujili, M; Koopman, J; Ramos, D; Sapinski, M; De Freitas, J; Ait Amira, Y; Djerdir, A

    2009-01-01

    Scanning of a high intensity particle beam imposes challenging requirements on a Wire Scanner system. It is expected to reach a scanning speed of 20 m.s-1 with a position accuracy of the order of 1 μm. In addition a timing accuracy better than 1 millisecond is needed. The adopted solution consists of a fork holding a wire rotating by a maximum of 200°. Fork, rotor and angular position sensor are mounted on the same axis and located in a chamber connected to the beam vacuum. The requirements imply the design of a system with extremely low vibration, vacuum compatibility, radiation and temperature tolerance. The adopted solution consists of a rotary brushless synchronous motor with the permanent magnet rotor installed inside of the vacuum chamber and the stator installed outside. The accurate position sensor will be mounted on the rotary shaft inside of the vacuum chamber, has to resist a bake-out temperature of 200°C and ionizing radiation up to a dozen of kGy/year. A digital feedback controller allows maxi...

  19. High accuracy 3-D laser radar

    DEFF Research Database (Denmark)

    Busck, Jens; Heiselberg, Henning

    2004-01-01

    We have developed a mono-static staring 3-D laser radar based on gated viewing with range accuracy below 1 m at 10 m and 1 cm at 100. We use a high sensitivity, fast, intensified CCD camera, and a Nd:Yag passively Q-switched 32.4 kHz pulsed green laser at 532 nm. The CCD has 752x582 pixels. Camera...... shutter is controlled in steps of 100 ps. Camera delay is controlled in steps of 100 ps. Each laser pulse triggers the camera delay and shutter. A 3-D image is constructed from a sequence of 50-100 2-D reflectivity images, where each frame integrates about 700 laser pulses on the CCD. In 50 Hz video mode...

  20. Secure Fingerprint Identification of High Accuracy

    Science.gov (United States)

    2014-01-01

    collections of biometric data in use today include, for example, fingerprint , face, and iris images collected by the US Department of Homeland Security...like to know whether the fingerprints they possess correspond to the same individual. In the above formulation, this is the problem of biometric ...solution using a homomorphic encryption scheme. FingerCodes use texture information from a fingerprint to compare two biometrics . The algo- rithm is

  1. High accuracy FIONA-AFM hybrid imaging.

    Science.gov (United States)

    Fronczek, D N; Quammen, C; Wang, H; Kisker, C; Superfine, R; Taylor, R; Erie, D A; Tessmer, I

    2011-04-01

    Multi-protein complexes are ubiquitous and play essential roles in many biological mechanisms. Single molecule imaging techniques such as electron microscopy (EM) and atomic force microscopy (AFM) are powerful methods for characterizing the structural properties of multi-protein and multi-protein-DNA complexes. However, a significant limitation to these techniques is the ability to distinguish different proteins from one another. Here, we combine high resolution fluorescence microscopy and AFM (FIONA-AFM) to allow the identification of different proteins in such complexes. Using quantum dots as fiducial markers in addition to fluorescently labeled proteins, we are able to align fluorescence and AFM information to ≥8nm accuracy. This accuracy is sufficient to identify individual fluorescently labeled proteins in most multi-protein complexes. We investigate the limitations of localization precision and accuracy in fluorescence and AFM images separately and their effects on the overall registration accuracy of FIONA-AFM hybrid images. This combination of the two orthogonal techniques (FIONA and AFM) opens a wide spectrum of possible applications to the study of protein interactions, because AFM can yield high resolution (5-10nm) information about the conformational properties of multi-protein complexes and the fluorescence can indicate spatial relationships of the proteins in the complexes.

  2. High accuracy & long timescale light curves

    Directory of Open Access Journals (Sweden)

    Hodgkin S.

    2013-04-01

    Full Text Available We present a theoretical analysis of the optical light curves (LCs for short-period high-mass transiting extrasolar planet systems. Our method considers the primary transit, the secondary eclipse, and the overall phase shape of the LC between the occultations. Phase variations arise from (i reflected and thermally emitted light by the planet, (ii the ellipsoidal shape of the star due to the gravitational pull of the planet, and (iii the Doppler shift of the stellar light as the star orbits the center of mass of the system. Our full model of the out-of-eclipse variations contains information about the planetary mass, orbital eccentricity, the orientation of periastron and the planet's albedo. For a range of hypothetical systems we demonstrate that the ellipsoidal variations (ii. can be large enough to be distinguished from the remaining components and that this effect can be used to constrain the planet's mass. As an example we presend KOI-13b (candidate exoplanet system included in the September 2011 Kepler data release. The Kepler light curve shows both primary and secondary eclipses, as well as significant out-of-eclipse light curve variations. We model the relative contributions from (i thermal emission from the companion, (ii planetary reflected light, (iii doppler beaming, and (iv ellipsoidal variations in the host-star arising from the tidal distortion of the host star by its companion. Our analysis, based on the light curve alone, enables us to constrain the mass of the KOI-13.01 companion to be MC = 8.3 ± 1.25 MJ and thus demonstrates that the transiting companion is a planet. The teqnique is useful for current and future space missions such as Kepler and PLATO.

  3. High accuracy GNSS based navigation in GEO

    Science.gov (United States)

    Capuano, Vincenzo; Shehaj, Endrit; Blunt, Paul; Botteron, Cyril; Farine, Pierre-André

    2017-07-01

    Although significant improvements in efficiency and performance of communication satellites have been achieved in the past decades, it is expected that the demand for new platforms in Geostationary Orbit (GEO) and for the On-Orbit Servicing (OOS) on the existing ones will continue to rise. Indeed, the GEO orbit is used for many applications including direct broadcast as well as communications. At the same time, Global Navigation Satellites System (GNSS), originally designed for land, maritime and air applications, has been successfully used as navigation system in Low Earth Orbit (LEO) and its further utilization for navigation of geosynchronous satellites becomes a viable alternative offering many advantages over present ground based methods. Following our previous studies of GNSS signal characteristics in Medium Earth Orbit (MEO), GEO and beyond, in this research we specifically investigate the processing of different GNSS signals, with the goal to determine the best navigation performance they can provide in a GEO mission. Firstly, a detailed selection among different GNSS signals and different combinations of them is discussed, taking into consideration the L1 and L5 frequency bands, and the GPS and Galileo constellations. Then, the implementation of an Orbital Filter is summarized, which adaptively fuses the GN1SS observations with an accurate orbital forces model. Finally, simulation tests of the navigation performance achievable by processing the selected combination of GNSS signals are carried out. The results obtained show an achievable positioning accuracy of less than one meter. In addition, hardware-in-the-loop tests are presented using a COTS receiver connected to our GNSS Spirent simulator, in order to collect real-time hardware-in-the-loop observations and process them by the proposed navigation module.

  4. High Accuracy Dual Lens Transmittance Measurements

    Science.gov (United States)

    2007-08-01

    measurement of lens transmission,” Metrologia 37, 603–605 (2000). 3. B. Munro, “Quantum information processing with light and its requirement for detectors...5. N. P. Fox, “Trap detectors and their properties,” Metrologia 28, 197–202 (1991). 5402 APPLIED OPTICS Vol. 46, No. 22 1 August 2007 6. S. L

  5. Browse Title Index

    African Journals Online (AJOL)

    Items 51 - 100 of 444 ... Vol 31, No 2 (1998), Beneficial effects of bending maize plants at .... Vol 35, No 1 (2002), Comparative studies on the effect of temperature on life tables of ... of silage made from leucaena (Leucaenaleucocephala (Lam.) ...

  6. Visual indexing and retrieval

    Directory of Open Access Journals (Sweden)

    Mohammadamin Erfanmanesh

    2014-06-01

    Full Text Available This book includes a preface, a table of contents, six informative chapters and expansive references. In the preface, the editors of the book claim that with the advent of social networks, vast amount of visual information is available for end-users. Therefore, they need innovative and fruitful methods for content understanding, retrieval and classification.

  7. Comparison Of Modified Dual Ternary Indexing And Multi-Key Hashing Algorithms For Music Information Retrieval

    Directory of Open Access Journals (Sweden)

    Rajeswari Sridhar

    2010-07-01

    Full Text Available In this work we have compared two indexing algorithms that have been used to index and retrieve Carnatic music songs. We have compared a modified algorithm of the Dual ternary indexing algorithm for music indexing and retrieval with the multi-key hashing indexing algorithm proposed by us. The modification in the dual ternary algorithm was essential to handle variable length query phrase and to accommodate features specific to Carnatic music. The dual ternary indexing algorithm is adapted for Carnatic music by segmenting using the segmentation technique for Carnatic music. The dual ternary algorithm is compared with the multi-key hashing algorithm designed by us for indexing and retrieval in which features like MFCC, spectral flux, melody string and spectral centroid are used as features for indexing data into a hash table. The way in which collision resolution was handled by this hash table is different than the normal hash table approaches. It was observed that multi-key hashing based retrieval had a lesser time complexity than dual-ternary based indexing The algorithms were also compared for their precision and recall in which multi-key hashing had a better recall than modified dual ternary indexing for the sample data considered.

  8. High-Accuracy Constant-Speed Research of Great Angular Momentum Brushless DC Gyro Motor%大角动量无刷直流陀螺电动机的高精度稳速研究

    Institute of Scientific and Technical Information of China (English)

    段晓妮; 孙纯祥

    2012-01-01

    A high-accuracy constant-speed system of great angular momentum permanent magnet brushless DC gyro motor was introduced. Based on the analysis of the operational principle of the brushless DC gyro motor, a speed closed -loop control strategy was designed, and the model of the BLDCM and controller was proposed in Simulink. DSP and CPLD were used as the main components of the controller. Piecewise PI was used as the control algorithm on steady speed. The motor was controlled by the combination of hardware and software to achieve soft start, protection of over current and steady speed controlling. Through prototype testing, the result shows that such control strategy has short starting time, high starting reliability and high-accuracy steady speed.%介绍了一种大角动量永磁无刷直流陀螺电动机的高精度稳速控制系统.在研究无刷直流陀螺电动机运行原理的基础上,应用了一种简单实用的速度闭环控制策略,并在Simulink中建立电机本体及控制模型.陀螺电动机的主控制器由硬件电路和软件程序组成.DSP和CPLD作为控制器主体,以分段PI算法为稳速控制方法,两者配合实现了软起动、过流保护和稳速控制等功能.样机试验结果表明,该控制系统起动迅速、起动可靠性高及稳速精度高.

  9. Glycemic index, insulinemic index, and satiety index of kefir.

    Science.gov (United States)

    Kong, Kai Ling; Hendrich, Suzanne

    2012-08-01

    To determine glycemic, insulinemic, and satiety indices of 3 types of kefir. This study was divided into 3 phases. In phase 1, 50 g of available carbohydrate from low-fat strawberry kefir or orange kefir was tested, and in phase 2, low-fat plain kefir containing 25 g of available carbohydrates was tested for glycemic index (GI), in both cases compared with an equivalent amount of glucose. In phase 3, 1000-kJ portions of all 3 types of kefirs were compared with white bread with the same energy content to determine the insulinemic index (II) and satiety index (SI) of all 3 kefirs. In all phases, a single-meal, randomized crossover design was performed in which the test meals were given to healthy adults, 5 men and 5 women. The total incremental plasma glucose area under the curve (iAUC) for strawberry, orange, and plain kefirs was significantly lower compared with the respective high-GI control food, which was glucose solution. However, the IIs and SIs of kefir did not differ significantly from the white bread. Kefir is a low- to moderate-GI food; however, its II was high. Although kefir had higher water content, the SI of kefir was not significantly different from white bread.

  10. Glycemic index of common Malaysian fruits.

    Science.gov (United States)

    Robert, S Daniel; Ismail, Aziz Al-Safi; Winn, Than; Wolever, Thomas M S

    2008-01-01

    The objective of the present study was to measure the glycemic index of durian, papaya, pineapple and water-melon grown in Malaysia. Ten (10) healthy volunteers (5 females, 5 males; body mass index 21.18+/-1.7 kg/m2) consumed 50 g of available carbohydrate portions of glucose (reference food) and four test foods (durian, papaya, pineapple and watermelon) in random order after an overnight fast. Glucose was tested on three separate occasions, and the test foods were each tested once. Postprandial plasma glucose was measured at intervals for two hours after intake of the test foods. Incremental areas under the curve were calculated, and the glycemic index was determined by expressing the area under the curve after the test foods as a percentage of the mean area under the curve after glucose. The results showed that the area under the curve after pineapple, 232+/-24 mmolxmin/L, was significantly greater than those after papaya, 147+/-14, watermelon, 139+/-8, and durian, 124+/-13 mmolxmin/L (pglycemic index of pineapple, 82+/-4, was significantly greater than those of papaya, 58+/-6, watermelon, 55+/-3, and durian, 49+/-5 (pglycemic index among papaya, watermelon and durian were not statistically significant. We conclude that pineapple has a high glycemic index, whereas papaya is intermediate and watermelon and durian are low glycemic index foods. The validity of these results depends on the accuracy of the data in the food tables upon which the portion sizes tested were based.

  11. ANAEROBIC CAPACITY MAY NOT BE DETERMINED BY CRITICAL POWER MODEL IN ELITE TABLE TENNIS PLAYERS

    Directory of Open Access Journals (Sweden)

    Alessandro M. Zagatto

    2008-03-01

    Full Text Available The aim of the present study was to verify the applicability of anaerobic work capacity (AWC determined from the critical power model in elite table tennis players. Eight male international level table tennis players participated in the study. The tests undertaken were: 1 A critical frequency test used to determinate the anaerobic work capacity; 2 Wingate tests were performed using leg and arm ergometers. AWC corresponded to 99.5 ± 29.1 table tennis balls. AWC was not related to peak (r = -0.25, mean (r = -0.02, relative peak (r = -0.49 or relative mean power (r = 0.01, nor fatigue index (r = -0.52 (Wingate leg ergometer. Similar correlations for peak (r = -0.34, mean (r = -0.04, relative peak (r = -0.49, relative mean power (r = -0.14 and peak blood lactate concentration (r = -0.08 were determined in the Wingate arm ergometer test. Based on these results the AWC determined by a modified critical power test was not a good index for measurement of anaerobic capacity in table tennis players

  12. High Accuracy Reference Network (HARN), Closed survey control network (between Order C class 1 and B depending on length of baseline) of 98 monumented points in Scott County - adjustment performed in NAD 1983/1996 HARN (conus), Published in 2005, Scott County.

    Data.gov (United States)

    NSGIC GIS Inventory (aka Ramona) — This High Accuracy Reference Network (HARN) dataset, was produced all or in part from Field Survey/GPS information as of 2005. It is described as 'Closed survey...

  13. Verification of aerial photo stand volume tables for southeast Alaska.

    Science.gov (United States)

    Theodore S. Setzer; Bert R. Mead

    1988-01-01

    Aerial photo volume tables are used in the multilevel sampling system of Alaska Forest Inventory and Analysis. These volume tables are presented with a description of the data base and methods used to construct the tables. Volume estimates compiled from the aerial photo stand volume tables and associated ground-measured values are compared and evaluated.

  14. 40 CFR Table 2 to Subpart Aaaaa of... - Operating Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Operating Limits 2 Table 2 to Subpart.... AAAAA, Table 2 Table 2 to Subpart AAAAA of Part 63—Operating Limits As required in § 63.7090(b), you must meet each operating limit in the following table that applies to you. For . . . You must . . ....

  15. 40 CFR Table 2 to Subpart Sssss of... - Operating Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Operating Limits 2 Table 2 to Subpart..., Subpt. SSSSS, Table 2 Table 2 to Subpart SSSSS of Part 63—Operating Limits As stated in § 63.9788, you must comply with the operating limits for affected sources in the following table:] For . . . You...

  16. 40 CFR Table 2 to Subpart Jjjjj of... - Operating Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Operating Limits 2 Table 2 to Subpart... Manufacturing Pt. 63, Subpt. JJJJJ, Table 2 Table 2 to Subpart JJJJJ of Part 63—Operating Limits As stated in § 63.8405, you must meet each operating limit in the following table that applies to you. For...

  17. 40 CFR Table 1 to Subpart Mmmmm of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart... Pt. 63, Subpt. MMMMM, Table 1 Table 1 to Subpart MMMMM of Part 63—Emission Limits As stated in § 63.8790(a), you must comply with the emission limits in the following table: For . . . You must . . ....

  18. 40 CFR Table 1 to Subpart Ssssss... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart.... SSSSSS, Table 1 Table 1 to Subpart SSSSSS of Part 63—Emission Limits As required in § 63.11451, you must comply with each emission limit that applies to you according to the following table: For each. . ....

  19. 40 CFR Table 1 to Subpart Kkkkk of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart.... KKKKK, Table 1 Table 1 to Subpart KKKKK of Part 63—Emission Limits As stated in § 63.8555, you must meet each emission limit in the following table that applies to you. For each . . . You must meet...

  20. 40 CFR Table 1 to Subpart Rrrrr of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart..., Table 1 Table 1 to Subpart RRRRR of Part 63—Emission Limits As required in § 63.9590(a), you must comply with each applicable emission limit in the following table: If your affected source is . . . and...

  1. 40 CFR Table 1 to Subpart Jjjjj of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart... Manufacturing Pt. 63, Subpt. JJJJJ, Table 1 Table 1 to Subpart JJJJJ of Part 63—Emission Limits As stated in § 63.8405, you must meet each emission limit in the following table that applies to you. For...

  2. 40 CFR Table 1 to Subpart Sssss of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart..., Subpt. SSSSS, Table 1 Table 1 to Subpart SSSSS of Part 63—Emission Limits As stated in § 63.9788, you must comply with the emission limits for affected sources in the following table: For . . . You...

  3. 40 CFR Table 1 to Subpart Ttttt of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 14 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart.... TTTTT, Table 1 Table 1 to Subpart TTTTT of Part 63—Emission Limits As required in § 63.9890(a), you must comply with each applicable emission limit in the following table: For . . . You must comply with each...

  4. 40 CFR Table 2 to Subpart Kkkkk of... - Operating Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Operating Limits 2 Table 2 to Subpart.... KKKKK, Table 2 Table 2 to Subpart KKKKK of Part 63—Operating Limits As stated in § 63.8555, you must meet each operating limit in the following table that applies to you. For each . . . You must . . ....

  5. 40 CFR Table 1 to Subpart Aaaaa of... - Emission Limits

    Science.gov (United States)

    2010-07-01

    ... 40 Protection of Environment 13 2010-07-01 2010-07-01 false Emission Limits 1 Table 1 to Subpart.... AAAAA, Table 1 Table 1 to Subpart AAAAA of Part 63—Emission Limits As required in § 63.7090(a), you must meet each emission limit in the following table that applies to you. For . . . You must meet...

  6. 21 CFR 880.6140 - Medical chair and table.

    Science.gov (United States)

    2010-04-01

    ... Devices § 880.6140 Medical chair and table. (a) Identification. A medical chair or table is a device intended for medical purposes that consists of a chair or table without wheels and not electrically powered... 21 Food and Drugs 8 2010-04-01 2010-04-01 false Medical chair and table. 880.6140 Section...

  7. [COSMOS motion design optimization in the CT table].

    Science.gov (United States)

    Shang, Hong; Huang, Jian; Ren, Chao

    2013-03-01

    Through the CT Table dynamic simulation by COSMOS Motion, analysis the hinge of table and the motor force, then optimize the position of the hinge of table, provide the evidence of selecting bearing and motor, meanwhile enhance the design quality of the CT table and reduce the product design cost.

  8. Competitive balance trends in elite table tennis: the Olympic Games and World Championships 1988-2016.

    Science.gov (United States)

    Zheng, Jinming; Oh, Taeyeon; Kim, Seungmo; Dickson, Geoff; De Bosscher, Veerle

    2017-09-07

    Competitive balance is important because it enhances outcome uncertainty and therefore it promotes spectator interest, and encourages government investment in a sport. This article analyses the distribution of gold medals, medals, medal points and top eight points amongst nations in table tennis from 1988 to 2016 at the Olympic Games and the World Championships respectively. A normalised version of the Herfindahl-Hirschman Index and a coefficient of variation are calculated for each nation's share of these performance indicators. The key findings are that China dominates both events, with successful female players being more dominant than their male counterparts. The competitive balance for gold medals has declined, whilst there is a trend towards improved competitive balance for top eight points for women, suggesting that more teams are featuring in the top eight (but not necessarily the top three) placings. This research has implications for the development of table tennis competitions. Compared to other racket sports, the issue of competitive imbalance in table tennis is particularly thorny, which threatens the long-term development of this sport. Accordingly, some measures are recommended for the International Olympic Committee and the International Table Tennis Federation to propel a more balanced development of international table tennis.

  9. Winning the game: Brain processes in expert, young elite and amateur table tennis players

    Directory of Open Access Journals (Sweden)

    Sebastian eWolf

    2014-10-01

    Full Text Available This study tested two hypotheses: (1 compared with amateurs and young elite, expert table tennis players are characterized by enhanced cortical activation in the motor and fronto-parietal cortex during motor imagery in response to table tennis videos; (2 in elite athletes, world rank points are associated with stronger cortical activation. To this aim, electroencephalographic data were recorded in 14 expert, 15 amateur and 15 young elite right-handed table tennis players. All subjects watched videos of a serve and imagined themselves responding with a specific table tennis stroke. With reference to a baseline period, power decrease/increase of the sensorimotor rhythm (SMR during the pretask- and task period indexed the cortical activation/deactivation (event-related desynchronization/synchronization, ERD/ERS. Regarding hypothesis (1, 8–10 Hz SMR ERD was stronger in elite athletes than in amateurs with an intermediate ERD in young elite athletes over the whole scalp. Regarding hypothesis (2, there was no correlation between ERD/ERS in the motor cortex and world rank points in elite experts, but a weaker ERD in the fronto-parietal cortex was associated with higher world rank points. These results suggest that motor skill in table tennis is associated with focused excitability of the motor cortex during reaction, movement planning and execution with high attentional demands. Among elite experts, less activation of the fronto-parietal attention network may be necessary to become a world champion.

  10. Winning the game: brain processes in expert, young elite and amateur table tennis players

    Science.gov (United States)

    Wolf, Sebastian; Brölz, Ellen; Scholz, David; Ramos-Murguialday, Ander; Keune, Philipp M.; Hautzinger, Martin; Birbaumer, Niels; Strehl, Ute

    2014-01-01

    This study tested two hypotheses: (1) compared with amateurs and young elite, expert table tennis players are characterized by enhanced cortical activation in the motor and fronto-parietal cortex during motor imagery in response to table tennis videos; (2) in elite athletes, world rank points are associated with stronger cortical activation. To this aim, electroencephalographic data were recorded in 14 expert, 15 amateur and 15 young elite right-handed table tennis players. All subjects watched videos of a serve and imagined themselves responding with a specific table tennis stroke. With reference to a baseline period, power decrease/increase of the sensorimotor rhythm (SMR) during the pretask- and task period indexed the cortical activation/deactivation (event-related desynchronization/synchronization, ERD/ERS). Regarding hypothesis (1), 8–10 Hz SMR ERD was stronger in elite athletes than in amateurs with an intermediate ERD in young elite athletes in the motor cortex. Regarding hypothesis (2), there was no correlation between ERD/ERS in the motor cortex and world rank points in elite experts, but a weaker ERD in the fronto-parietal cortex was associated with higher world rank points. These results suggest that motor skill in table tennis is associated with focused excitability of the motor cortex during reaction, movement planning and execution with high attentional demands. Among elite experts, less activation of the fronto-parietal attention network may be necessary to become a world champion. PMID:25386126

  11. A DRIVEN BACKUP ROUTING TABLE TO FIND ALTERNATIVE DISJOINT PATH IN AD HOC WIRELESS

    Directory of Open Access Journals (Sweden)

    Radwan S. Abujassar

    2011-08-01

    Full Text Available The performances of the routing protocols are important since they compute the primary path betweensource and destination. In addition, routing protocols need to detect failure within a short period oftime when nodes move to start updating the routing table in order to find a new primary path tothe destination. Meantime, loss of packets and end-to- end delays will increase thereby reducingthroughput and degrading the performance of the network. This paper proposes a new algorithm,DBRT (Driven Backup Routing Table, to improve the existing proactive protocols such as DSDV(Destination Sequenced Distance Vector protocol by creating a backup routing table to providemultiple alternative routes. The DBRT algorithm identifies adjacent nodes for each node in the samerange and then selects one of these as a backup next hop according to the available path to thedestination. The results show that loss of data packets, throughput and end-to-end delay times betweensource and destination are improved. The results show that the new protocol does not degrade thenetwork’s performance despite sending extra messages to construct and update the new backuprouting table. Simulations (using an NS2 simulator are undertaken to demonstrate the differencebetween using a DSDV protocol with or without the proposed schema.Index Terms; Network Protocols ;( DSDV Destination Sequenced Distance Vector ; DBRT (Driven BackupRouting Table;Wireless Network; Mobile Ad Hoc Network

  12. On eccentric connectivity index

    CERN Document Server

    Zhou, Bo

    2010-01-01

    The eccentric connectivity index, proposed by Sharma, Goswami and Madan, has been employed successfully for the development of numerous mathematical models for the prediction of biological activities of diverse nature. We now report mathematical properties of the eccentric connectivity index. We establish various lower and upper bounds for the eccentric connectivity index in terms of other graph invariants including the number of vertices, the number of edges, the degree distance and the first Zagreb index. We determine the n-vertex trees of diameter with the minimum eccentric connectivity index, and the n-vertex trees of pendent vertices, with the maximum eccentric connectivity index. We also determine the n-vertex trees with respectively the minimum, second-minimum and third-minimum, and the maximum, second-maximum and third-maximum eccentric connectivity indices for

  13. NEW CONCEPTS IN INDEXING.

    Science.gov (United States)

    SHANK, R

    1965-07-01

    Recent trends in indexing emphasize mechanical, not intellectual, developments. Mechanized operations have produced indexes in depth (1) of information on limited areas of science or (2) utilizing limited parameters for analysis. These indexes may include only citations or both useful data and citations of source literature. Both keyword-in-context and citation indexing seem to be passing the test of the marketplace. Mechanical equipment has also been successfully used to manipulate EAM cards for production of index copy. Information centers are increasingly being used as control devices in narrowly defined subject areas. Authors meet growing pressures to participate in information control work by preparing abstracts of their own articles. Mechanized image systems persist, although large systems are scarce and the many small systems may bring only limited relief for information control and retrieval problems. Experimentation and limited development continue on theory and technique of automatic indexing and abstracting.

  14. The Glycemic Index

    OpenAIRE

    Williams, Pauline

    2004-01-01

    The glycemic index is a ranking of carbohydrate containing foods. Foods are ranked according to their immediate effect on blood sugar levels. The higher a f ood raises blood sugar, the higher its glycemic index. Scientists published the first index in 1981 when they were researching diet therapy for diabetes. This first list contained 51 foods, and the list has continued to expand, with the most recent official list containing 750 foods. Fruits, grains, dairy products, some vegetables, pastas...

  15. Supplement: Commodity Index Report

    Data.gov (United States)

    Commodity Futures Trading Commission — Shows index traders in selected agricultural markets. These traders are drawn from the noncommercial and commercial categories. The noncommercial category includes...

  16. Semantic Text Indexing

    Directory of Open Access Journals (Sweden)

    Zbigniew Kaleta

    2014-01-01

    Full Text Available This article presents a specific issue of the semantic analysis of texts in natural language – text indexing and describes one field of its application (web browsing.The main part of this article describes the computer system assigning a set of semantic indexes (similar to keywords to a particular text. The indexing algorithm employs a semantic dictionary to find specific words in a text, that represent a text content. Furthermore it compares two given sets of semantic indexes to determine texts’ similarity (assigning numerical value. The article describes the semantic dictionary – a tool essentialto accomplish this task and its usefulness, main concepts of the algorithm and test results.

  17. Refractive index determination as a tool for temperature measurement and process control: a new approach

    Science.gov (United States)

    Schaller, Johannes K.; Wassenberg, S.; Fiedler, Detlev K.; Stojanoff, Christo G.

    1994-11-01

    Recently a new method for temperature measurement of droplets was presented. This method determines the index of refraction of a spherical scatterer with high accuracy and utilizes the dependence of the index of refraction on the temperature to finally determine the temperature. In this paper we show that the method is likewise applicable to cylindrical scatterers with a homogeneous refractive index distribution, like liquid jets. The method can be used to optically determine the temperature of a liquid jet, or to measure other properties of the liquid that influence the index of refraction of that liquid. One such property is the concentration of one liquid in another, like that of glycerol in an aqueous solution, which was studied experimentally for assessing some properties of the proposed method. An estimation of the sensitivity of the method was gained by detecting temperature changes of a cylindrical water jet.

  18. Determination of potassium iodide in table salt

    Directory of Open Access Journals (Sweden)

    Rajković Miloš B.

    2009-01-01

    Full Text Available The samples of table salt bought in Belgrade supermarkets are analysed in this paper. The method of indirect iodometry was used in the process of the analysis, and received results were converted into the content of KI in mg/kg of salt. Beside the content of KI, the content of NaCl was also determined, counted to dry meter and water content, and received results were compared with the requests determined by Regulations of Table Salt Quality Meant for Human Diet and by manufacturers' declaration. Received results show that the volumetric method of indirect iodometry, applied in this analysis, is very reliable for determination of potassium iodine in table salt, because of its high precision and reproducibility of the analysis results. All received results show that the samples of table salt which can be bought in supermarkets are according to the demands given by Regulations. Only one sample (evaporated salt has significantly less mass of KI than it is determined by Regulations, but also by manufacturer's declaration. Measured humidity in the samples of table salt received from sea salt (sample 1 is higher than humidity in the samples received from rock salt as the result of magnesium presence in sea salt, which is hygroscopic material. Although samples 5 and 6 also originate from sea salt, their smaller humidity is the result of additional heating and salt processing. .

  19. The Last Element of Mendeleev's Periodic Table

    Science.gov (United States)

    Khazan, Albert

    2010-02-01

    Despite much achievements of the synthesis for super-heavy elements (10 new elements were obtained during the last 25 years), the experts in Mendeleev's Periodic Table have not answered the most fundamental question: where the Table ends? The calculations produced on the basis of Quantum Mechanics (the physical conditions in micro-scales) do not not answer this question till now. In my study of chemical compounds, I focused onto the physical conditions observed in macro-scales (the subjects of the regular physics and chemistry). Thus, the Law of Hyperboles was discovered in the Periodic Table: given any chemical compound, the contents of any element in it (per 1 gram-atom), including the contents of unknown elements, whose atomic masses can be set up arbitrarily, is described by the equation of a equilateral hyperbola Y=K/X. The tops of all the arcs are distributed along a real axis crossing the line Y=1 in the point of abscissa 411.66, which manifests the actual atomic mass of the last (heaviest) element of the Periodic Table: its location is Period 8, Group 1; its atomic mass is 411.66, its number is 155 (Khazan A. Upper Limit in Mendeleev's Periodic Table --- Element No.155. Svenska fysikarkivet, 2009). )

  20. Geostatistical investigation into the temporal evolution of spatial structure in a shallow water table

    Directory of Open Access Journals (Sweden)

    S. W. Lyon

    2006-01-01

    during many rain events. During the summer, when evaporation exceeds precipitation, the ranges of the indicator semivariograms decreased during rainfall events due to isolated responses in the water table. For the longer, monthly time interval, semivariograms exhibited higher sills and shorter ranges during spring and lower sills and longer ranges during the summer. For this long time interval, there was a good correlation between probability of exceeding the time-variable median water table and the soil topographical wetness index during the spring. Indicator kriging incorporating both the short and long time interval structure of the shallow water table (hard and soft data, respectively provided more realistic maps that agreed better with actual observations than the hard data alone. This technique to represent both event-based and seasonal trends incorporates the hillslope-scale hydrological processes to capture significant patterns in the shallow water table. Geostatistical analysis of the spatial and temporal evolution of the shallow water table gives information about the formation of saturated areas important in the understanding hydrological processes working at this and other hillslopes.