WorldWideScience

Sample records for high producing estonian

  1. How to Improve the Supportive Role of Estonian Innovation System toward Launching New Products by High Technology Companies?

    Directory of Open Access Journals (Sweden)

    Liisi Sepp

    2013-01-01

    Full Text Available The purpose of the study is to evaluate how supportive is Estonian national innovation system toward the launching of new innovative products by high technology firms. The article intends to combine two broad areas of research – national innovation system approach and the different models of the new product launching. Based on the literature review and in-depth analysis of three case studies of Estonian high-tech company’s major barriers as well success factors of highly innovative product launches were identified. The barriers of the new product launching were linked with the systemic failures of the national innovation system. The most relevant failures of Estonian national innovation system inhibiting the new product development are capability and networking failures. The sources of innovation of high-technology firms are too narrow, linkages with domestic firms and higher education institutions as well with foreign firms are poorly developed. High-tech firms have also serious capacity problems due to the extremely weak support mechanism by national innovation system on the seed funding stage of product development and prototype building stage as well. Paper argues that resources needed for the innovation should not be looked too narrowly following linear innovation model approach. Instead interactive approach is needed, which combines capability building, network development, interactive learning with direct investments into fundamental research.

  2. Estonian literature / Janika Kronberg

    Index Scriptorium Estoniae

    Kronberg, Janika, 1963-

    2003-01-01

    Sisu: Estonian literature - born on the margins of Europe ; Baltic German literature and its impact ; Seeking the contours of a 'truly' Estonian literature ; Literature and an independent Estonia ; Estonian literature in two cultural spheres ; The fifties and sixties ; Literature and congealed time ; A bold new Estonian literature

  3. The 2011 Estonian High School Language Reform in the Context of Critical Language Policy and Planning

    Science.gov (United States)

    Skerrett, Delaney Michael

    2014-01-01

    This paper seeks to situate Estonian language use and policy within the emerging field of critical language policy and planning (CLPP) by investigating the discourses that frame linguistic behaviour. This done by way of an analysis of a series of interviews carried out with key actors in language policy in Estonia. The discourses framing language…

  4. Overview of the Estonian Biofuels Association activities

    International Nuclear Information System (INIS)

    Hueues, Meelis

    2000-01-01

    Due to global warming and environment pollution because of widespread use of fossil fuels there are already tendencies to stabilize and decrease the consumption of these energy resources and take into use more renewable energy resources. Estonian Biofuels Association (EBA) is a non-profit association, which was founded on 8. of May 1998 in Tallinn. The EBA is an independent and voluntary alliance of its members. Fields of activity of the EBA are by biofuels research, developing and evaluation to engage environmental, biofuels and energy saving. EBA members are: energy consultants, scientists, as well as fuel suppliers, DH-companies, technology suppliers, energy service companies etc. The members of EBA are involved in different projects in Estonia, where biomass are produced and used for heating, where wood, waste, peat, rape oil and biogas resources are examined and put into use, and also projects which deal with energy saving and environment friendly equipment production for using biofuels. During our short experience we have noticed that people in Estonia have become more aware of biomass and their use, so the development of environment friendly and sustainable energetics will continue in Estonia. Available biofuels in Estonia could compete with fossil fuels if burnt rationally with high technology equipment. EBA members are convinced that biomass have perspective and that they could play an important role in improving Estonian economic and environmental situation. Modem biomass combustion devices are taken into use more the faster general wealth increases and EBA can raise people's awareness of bio fuel subject through special, courses and media. We want Estonian energy policy to develop towards widespread use of renewable energy resources, which would save energy and environment improve nation's foreign trade balance and create jobs mainly in rural areas

  5. Valued Estonian Music CDs

    Index Scriptorium Estoniae

    2004-01-01

    2002. aastal välja antud eesti muusika heliplaatidest Artur Kapp "Symphonische Werke", Eduard Tubin "Symphonies No.9, No.10 and No.11", "Estonian Preludes", "Eesti heliloojad. Hortus Musicus", "Eesti Muusika Päevad", "Tallinn Saxophone Quartet. Estonian Contemporary Music", "Triskele. Kolga-Jaani vaimulikud rahvalaulud", "Helmekaala. Linnupuu Anne", "Modern Fox mängib Raimond Valgret",

  6. Estonian wind climate

    International Nuclear Information System (INIS)

    Kull, Ain

    1999-01-01

    Estonia is situated on the eastern coast of the Baltic Sea. This is a region with intensive cyclonic activity and therefore with a relatively high mean wind speed. Atmospheric circulation and its seasonal variation determine the general character of the Estonian wind regime over the Atlantic Ocean and Eurasia. However, the Baltic sea itself is a very important factor affecting wind climate, it has an especially strong influence on the wind regime in costal areas. The mean energy density (W/m 2 ) is a wind energy characteristic that is proportional to the third power of wind speed and describes energy available in a flow of air through a unit area. The mean energy density is a characteristic which has practical importance in regional assessment of snowdrift, storm damage and wind energy

  7. Estonian Tax Structure

    Directory of Open Access Journals (Sweden)

    Viktor Trasberg

    2014-08-01

    Full Text Available The paper analyses Estonian tax structure changes during the last decade and critically assesses the current situation. The country’s tax mix is rather unique among EU countries – it has one of the highest proportions of consumption taxes in total taxes and the lowest level of capital and profit taxes. Such an unbalanced tax structure creates risks for public finances, limits revenue collection and distorts the business environment.

  8. Estonian energy forest project

    International Nuclear Information System (INIS)

    Koppel, A.; Kirt, E.; Kull, K.; Lasn, R.; Noormets, A.; Roostalu, H.; Ross, J.; Ross, V.; Sulev, M.

    1994-04-01

    In February 1993 an agreement of Swedish-Estonian scientific co-operation on energy forest was signed. In may five energy forest plantations (altogether 2 ha) were established in Estonia with Swedish selected clones of Salix viminalis and Salix dasyclados. The research within this project is carried out within three main directions. The studies of basic ecophysiological processes and radiation regime of willow canopy will be carried out in Toravere. The production ecology studies, comparison of the productivity of multiple clones on different soil types is based on the plantations as vegetation filter for wastewater purification is studied on the basis of plantations in Vaeike-Maarja and Valga (author)

  9. Emission from Estonian oil shale power plants

    International Nuclear Information System (INIS)

    Aunela, L.; Haesaenen, E.; Kinnunen, V.; Larjava, K.; Mehtonen, A.; Salmikangas, T.; Leskelae, J.; Loosaar, J.

    1995-01-01

    Flue gas emissions from pulverized oil shale fired boilers of Estonian and Baltic power plants have been studied. The concentrations of NO x , CO, C x H y , HCI, Hf and polycyclic aromatic hydrocarbons in flue gases have been found to be relatively low and acceptable according to German emission limits, for instance. Desulphurization degree of flue gases by SO 2 absorption with ash has been found to vary defending on boiler type and operation conditions. In spite of significant sulphur capture (average values for different boilers in the range between 68 and 77 % of the initial sulphur content of the fuel), SO 2 concentrations in flue gases remain still very high (up to 2600 mg/m 3 , 10% O 2 ). Very high concentrations of particles, especially at Estonian Power Plant (up o 6250 mg/m 3 , 10 % 0 2 ) have been detected. Heavy metal emissions were too high by the reason of particle control insufficiency as well. Yearly emission estimates of this study support the former Estonian ones within the range of 10-15 %. (author)

  10. Estonian Airi uued soodsad pakkumised

    Index Scriptorium Estoniae

    2010-01-01

    Estonian Airi kodulehelt on võimalik osta lennupileteid koostööpartnerite poolt pakutavatele mandritevahelistele lendudele ning broneerida internetis hotellituba Euroopa suurima hotelli broneerimise teenust pakkuva ettevõtte Booking.com kaudu

  11. [Mati Erelt. Estonian Language] / Katrin Hiietamm

    Index Scriptorium Estoniae

    Hiietamm, Katrin

    2004-01-01

    Arvustus: Estonian language / [Estonian Academy of Sciences] ; edited by Mati Erelt.Tallinn : Teaduste Akadeemia Kirjastus, 2003. 412, [1] lk. : ill., kaart. (Linguistica Uralica. Supplementary series, 0868-4731 ; vol. 1)

  12. Ethnic Self-Esteem and Intergroup Attitudes Among the Estonian Majority and the non-Estonian Minority

    Directory of Open Access Journals (Sweden)

    Maaris Raudsepp

    2009-11-01

    Full Text Available The study was focussed on the relationships between ethnic self-esteem and various indicators of intergroup attitudes in a representative sample of adult population of Estonia (N=1142. Attitudinal variables that discriminated most between persons with high and low ethnic self-esteem were identified. Among Estonians ethnic self-esteem was related to positive ingroup bias, readiness for outgroup contact, perceived threat from the outgroup, attitudes to non-Estonian minority, and attitudes toward minority integration. Among non-Estonians ethnic self-esteem was related to readiness for outgroup contact, ethnic sterotypes, and various attitudes towards minority integration. An attempt was made to reconstruct the system of intergroup attidues of prototypical persons with high and low ethnic selfesteem and to describe psychological implications of high and low ethnic self-esteem for members of majority and minority groups. Various theoretical models (social identity theory, integrated threat theory, social dominane theory were used for interpretation of the results.

  13. Estonian horticultural peat marketing: sales promotion and price formation. 2. part

    International Nuclear Information System (INIS)

    Hammer, Hele

    1999-01-01

    When forming prices, Estonian peat companies' decisions should be based on marginal cost analysis. Unfortunately most Estonian companies sell peat to intermediaries and cannot influence its price. Estonian peat producers have to choose between either selling peat directly or selling through a central marketing organization. Both systems have their pros and cons. Direct selling gives more freedom to individual producers but is more risky. Central marketing makes cost saving possible and is more effective and stable, but may alienate producers from clients and markets. Whichever marketing system Estonian peat companies choose, the most important elements in their marketing strategy should be: careful market analysis, personal sales, attending trade shows, catalogues, quality service and offering transportation services. (author)

  14. Estonian white paper on energy

    International Nuclear Information System (INIS)

    Hamburg, Arvi

    1997-01-01

    Energy policy, environmental protection and economy form a triangle of tightly linked sectors, and any solution of some energy problem can be solved only in the light of all the above mentioned factors. There are several energy master plans for Estonia, the first of them dating back to the years of the Soviet Union and ending the list with the plan to cover the years up to 2000. By now the basic principles of the Estonian energy policy have been prepared and Estonian Energy Concept is being worked out. The main goal of Estonian energy policy is ensure an effective and environmentally benign energy supply for the country. It means safety in energy supply, effective production and supply together with sufficient environmental protection. Energy Council in the role of an advisory voluntary organization for inspection of the energy system and finding measures to improve its efficiency is established with parliament members included. The Estonian Energy Research Institute and the Oil--Shale Research Institute serve as a scientific advisory board for the government in energy policy. It's important to emphasise that privatisation is no panacea, solving all the problems, and therefore we are facing hard to move in the right direction, satisfying all the consumers of energy

  15. Logistics in Estonian business companies

    Directory of Open Access Journals (Sweden)

    A. Kiisler

    2008-12-01

    Full Text Available The article describes logistics survey in Estonia carried out in 2007 as a part of the LogOnBaltic project. The level of logistics in Estonian manufacturing, trading and logistics companies is explored through logistics costs, performance indicators, outsourcing, ICT use and logistics self-estimation of the companies responded. Responses from 186 Estonian companies were gathered through a web-based survey (38% of manufacturing, 38% of trading and 24% of logistics sector. Logistics costs as the percentage of turnover make in average 13.8% in manufacturing and 13.3% in trading. Transportation and inventory carrying cost form around 70% of overall logistics costs. Considering the logistics indicators surveyed, Estonian companies show up with relatively low perfect order fulfillment rates, short customer order fulfillment cycles and effective management of cash flows. The most widely outsourced logistics function is international transportation followed by domestic transportation, freight forwarding and reverse logistics. By 2010, the outsourcing of IT systems in logistics followed by inventory management, warehousing and product customization is expected to increase more substantially. The awareness of logistics importance is still low among Estonian companies. Only 27–44% of those agree that logistics has a considerable impact on profitability, competitive advantage, top management or customer service level.

  16. Trace metal emissions from the Estonian oil shale fired power

    DEFF Research Database (Denmark)

    Aunela-Tapola, Leena A.; Frandsen, Flemming; Häsänen, Erkki K.

    1998-01-01

    Emission levels of selected trace metals from the Estonian oil shale fired power plant were studied. The plant is the largest single power plant in Estonia with an electricity production capacity of 1170 MWe (1995). Trace metals were sampled from the flue gases by a manual method incorporating...... in the flue gases of the studied oil shale plant contribute, however, to clearly higher total trace metal emission levels compared to modern coal fired power plants. Although the old electrostatic precipitators in the plant have been partly replaced by state-of-the-art electrostatic precipitators...... a two-fraction particle sampling and subsequent absorption of the gaseous fraction. The analyses were principally performed with ICP-MS techniques. The trace metal contents of Estonian oil shale were found to be in the same order of magnitude as of coal on average. The high total particle concentrations...

  17. Estonian Air to overhaul strategy / Matt Withers

    Index Scriptorium Estoniae

    Withers, Matt

    2008-01-01

    Estonian Air on majanduslikes raskustes, mida aitaks leevendada riigipoolne toetus. Majandus- ja kommunikatsiooniminister Juhan Parts leiab, et riik peaks omama lennufirma juhatuses esimehe kohta, et mõjutada rohkem vastuvõetavaid otsuseid ja investeeringuid

  18. Estonian Golf & Country Club / Urmas Oja

    Index Scriptorium Estoniae

    Oja, Urmas, 1981-2012

    2005-01-01

    Konkursil "Eesti parim puitehitis 2005" pälvis voodrilaua eripreemia Jõelähtme Estonian Golf & Country Club'i katus. Arhitekt Andres Siim. Sisearhitekt Juta Lember. Konstruktor: AS Resand. 11 värv. ill

  19. Estonian Air / Kirsti Vainküla

    Index Scriptorium Estoniae

    Vainküla, Kirsti, 1972-

    2004-01-01

    Estonian Air reklaamib end Taani linna Aalborgi raadiojaama ilmateates. Lennukompanii pressiesindaja Epp Alatalu sõnul on firma Taanis reklaamimise põhjus see, et liinil Tallinn-Kopenhaagen sõitjate hulgas ei ole peaaegu üldse taanlasi

  20. On the System of Person-Denoting Signs in Estonian Sign Language: Estonian Name Signs

    Science.gov (United States)

    Paales, Liina

    2010-01-01

    This article discusses Estonian personal name signs. According to study there are four personal name sign categories in Estonian Sign Language: (1) arbitrary name signs; (2) descriptive name signs; (3) initialized-descriptive name signs; (4) loan/borrowed name signs. Mostly there are represented descriptive and borrowed personal name signs among…

  1. Air Baltic: Estonian Air on nurka surutud / Teele Tammeorg

    Index Scriptorium Estoniae

    Tammeorg, Teele

    2010-01-01

    Air Balticu asepresidendi Janis Vanagsi hinnangul on Estonian Air aastaid jätnud tähelepanuta oma peamised turismiturud ning on praegu halvas seisus. Air Baltic on endiselt huvitatud Estonian Airi ostust. Majandus- ja kommunikatsiooniminister Juhan Partsi seisukoht

  2. Producing high-quality slash pine seeds

    Science.gov (United States)

    James Barnett; Sue Varela

    2003-01-01

    Slash pine is a desirable species. It serves many purposes and is well adapted to poorly drained flatwoods and seasonally flooded areas along the lower Coastal Plain of the Southeastern US. The use of high-quality seeds has been shown to produce uniform seedlings for outplanting, which is key to silvicultural success along the Coastal Plain and elsewhere. We present...

  3. Composition of Estonian atmosphere

    International Nuclear Information System (INIS)

    Punning, J. M.; Karindi, A.

    1996-01-01

    Atmospheric study, particularly that of its chemical composition, has a long tradition in Estonia. Since middle of this century, in addition to meteorological observations, some chemical compounds in precipitations have been regularly measured in many meteorological stations. The main aim was to acquire information about the state and dynamics of the atmosphere. Therefore, main attention was paid to monitoring chemical compounds which have a direct impact on the human environment. As energy production developed intensively and SO 2 and NO x increased drastically in the atmosphere in acidic rock areas, like Scandinavia, the problem of acid rain became the most important environmental problem in Europe and North-America. As a consequence, monitoring the compounds of sulphur in precipitation was organized in Estonia. In the 1970 s, as related to large operating oil shale-based power plants, Estonia became a country , where emissions of sulphur compounds per capita were extremely high. In 1979, Estonia became a participant in the European Monitoring and Evaluation Programme - the network created to study transboundary air pollution. The aims of the precipitation chemistry study and the related problems of the formation and transformation of the atmospheric composition have varied over the years. But monitoring of pollutant (in particular, sulphur compound) loads has been a central issue. Over recent years, an attempt was made to estimate the spatial regularities of atmospheric impurities and their impact on the pH of mean monthly precipitations. Furthermore, calculations were provided to find out the origin of atmospheric impurities washed out in Estonia. Until the 1990 s, CO 2 , and some other greenhouse gas (GHG) emissions were not studied in Estonia. The first inventory of GHG for Estonia was provided in 1995 using the Intergovernmental Panel on Climate Change (IPCC) methodology

  4. Estonian total ozone climatology

    Directory of Open Access Journals (Sweden)

    K. Eerme

    Full Text Available The climatological characteristics of total ozone over Estonia based on the Total Ozone Mapping Spectrometer (TOMS data are discussed. The mean annual cycle during 1979–2000 for the site at 58.3° N and 26.5° E is compiled. The available ground-level data interpolated before TOMS, have been used for trend detection. During the last two decades, the quasi-biennial oscillation (QBO corrected systematic decrease of total ozone from February–April was 3 ± 2.6% per decade. Before 1980, a spring decrease was not detectable. No decreasing trend was found in either the late autumn ozone minimum or in the summer total ozone. The QBO related signal in the spring total ozone has an amplitude of ± 20 DU and phase lag of 20 months. Between 1987–1992, the lagged covariance between the Singapore wind and the studied total ozone was weak. The spring (April–May and summer (June–August total ozone have the best correlation (coefficient 0.7 in the yearly cycle. The correlation between the May and August total ozone is higher than the one between the other summer months. Seasonal power spectra of the total ozone variance show preferred periods with an over 95% significance level. Since 1986, during the winter/spring, the contribution period of 32 days prevails instead of the earlier dominating 26 days. The spectral densities of the periods from 4 days to 2 weeks exhibit high interannual variability.

    Key words. Atmospheric composition and structure (middle atmosphere – composition and chemistry; volcanic effects – Meteorology and atmospheric dynamics (climatology

  5. Stocks of organic carbon in Estonian soils

    Directory of Open Access Journals (Sweden)

    Kõlli, Raimo

    2009-06-01

    Full Text Available The soil organic carbon (SOC stocks (Mg ha–1 ofautomorphic mineral (9 soil groups, hydromorphic mineral (7, and lowland organic soils (4 are given for the soil cover or solum layer as a whole and also for its epipedon (topsoil layer. The SOC stocks for forest, arable lands, and grasslands and for the entire Estonian soil cover were calculated on the basis of the mean SOC stock and distribution area of the respective soil type. In the Estonian soil cover (42 400 km2, a total of 593.8 ± 36.9 Tg of SOC is retained, with 64.9% (385.3 ± 27.5 Tg in the epipedon layer (O, H, and A horizons and 35.1% in the subsoil (B and E horizons. The pedo-ecological regularities of SOC retention in soils are analysed against the background of the Estonian soil ordination net.

  6. Digimodernistlik eesti kirjanik / The Digimodernist Estonian Writer

    Directory of Open Access Journals (Sweden)

    Piret Viires

    2013-06-01

    Full Text Available The article examines the cultural situation following postmodernism in the first decade of the 21st century. To characterise this situation, the umbrella term “post-postmodernism” is used, as well as “neomodernism”, “altermodern”, “metamodernism”, “hypermodernity”, “performatism”, “critical realism” etc. All these approaches are, in a wider sense, united by their aim of opposing postmodernist cynicism and irony, and bringing back truth, simplicity and clarity. It has also been found that literature has returned or is returning to realism, and various cultural phenomena are emerging, which have been designated by the concept “new sincerity”.In descriptions of the current cultural situation, this trend seeking truth and simplicity is supported by approaches which emphasise the significance of technological developments during the last decade. A prominent figure here is Alan Kirby, who launched the term “digimodernism”, mainly linked with the adaptation and spread of Web 2.0 at the beginning of the 21st century: the blogosphere, Wikipedia, Twitter and Facebook.The article seeks answers to the question of whether we can talk about digimodernism in Estonian literature in the 2000s. In the 1990s Estonian writers were quite reluctant to undertake computer-technological experiments, and there are only a few examples of Estonian digital literature, whereas a change occurred in the 2000s. Many Estonian writers have had and still have their own blogs and surprisingly many have joined Facebook. The term “twitterature” is also familiar to Estonian writers. The article tackles the dominant topics in the blogs of Estonian writers and analyses their possible collective creative work on Facebook. A question is raised as to whether it is possible that the fragmentary narrative structure of blogs and Facebook has influenced mainstream literature.The article concludes that one essential change in Estonian literature in the

  7. Power without manpower: Forecasting labour demand for Estonian energy sector

    International Nuclear Information System (INIS)

    Meriküll, Jaanika; Eamets, Raul; Humal, Katrin; Espenberg, Kerly

    2012-01-01

    As energy demand and prices continue to grow, oil shale might help mitigate the energy crisis—it can widely be found all over the world but so far has not been widely used. Estonia is unique in the world for producing a large majority of energy out of oil shale and has been set as an example in numerous papers covering oil shale deposits, technology etc. This paper is the first to analyse oil shale energy related workforce and provides scenario forecasts of the labour demand for the Estonian energy sector in 2010–2020. The contribution of the paper is twofold. First, the paper provides a valuable insight into oil shale energy related workforce, enabling to take into consideration the educational needs in countries where oil shale industry might be set up. Second, methodology-wise, the paper relates labour demand and supply to different scenarios of energy production capacities. The results illustrate problems related to aging of the workforce in energy production. If the existing trends continue in educational attainment in Estonia, there will be a serious shortage of high-skilled engineering and manufacturing specialists. Our method provides a simple yet reliable enough way to check for such problems early enough. - Highlights: ► This paper analyses oil shale energy related workforce and provides scenario forecasts. ► This is the first study to investigate the workforce related to oil shale energy production. ► The main workforce-related problem in the sector is ageing of the workforce. ► Workers immigrating to the sector during the Soviet times are at the retirement age. ► There will be a serious shortage of engineers for energy sector in the near future.

  8. Valued Estonian Music CDs / Igor Garshnek

    Index Scriptorium Estoniae

    Garšnek, Igor, 1958-

    2003-01-01

    2002. aastal välja antud eesti muusika heliplaatidest Arvo Pärt "Summa", Lepo Sumera "Chamber Music", "Baltic Voices 1.", "Sequenzen - Europäische Orgelmusik des 20. Jahrhundrets mit...", "El silenco ئ Silence. Kuldar and Marje Sink. Songs of Mother and Son", "Riho Sibul. Estonian Dream Big Band", "Rull's Royce ئ Rull's Choice"

  9. Resource and utilization of Estonian hydropower

    International Nuclear Information System (INIS)

    Raesaar, P.

    2005-01-01

    An overview of the Estonian hydropower resources and their utilization at present as well as prospective for the future are presented in this paper. A short overview of advantages of small hydropower stations and related issues is given. Some technological aspects are treated briefly. (authors)

  10. Transformational Leadership in the Estonian Defence Forces

    Directory of Open Access Journals (Sweden)

    Antek Kasemaa

    2015-06-01

    Full Text Available Purpose – The study is a contribution to the validation of the 15 items and 5 subscales Transformational Leadership Scale (TLS proposed by Rafferty and Griffin (2004. Design/methodology/approach – The sample includes participants from different levels of the Estonian Defence Forces (EDF military hierarchy (N=2570. The structure of the TLS was examined by using exploratory and confirmatory factor analyses. Additionally ANOVA was used to compare the results between different subsamples. Findings – TLS showed satisfactory reliability. Confirmatory factor analyses found TLS as valid five dimensions instrument to measure transformational leadership in the Estonian military context. Different management levels showed different emphases among the dimensions of transformational leadership. Research and practical limitations/implications – TLS will be an important tool to use in transformational leadership research in the Estonian military context and beyond. Additionally, the current research contributes to the development of alternative measurement tools besides the most commonly used MLQ. The limitation of the work will be the rather homogenous sample from the Estonian military, however it will open the door for the subsequent research using different samplings. Originality/value – The current research found TLS to be a reliable and valid instrument, very short and therefore easy to administrate, having the possibility to use it with five dimensional and as one general transformational instrument as well.

  11. Swedish-Estonian energy forest research cooperation

    International Nuclear Information System (INIS)

    Ross, J.; Kirt, E.; Koppel, A.; Kull, K.; Noormets, A.; Roostalu, H.; Ross, V.; Ross, M.

    1996-01-01

    The Organization of Estonian energetic economy is aimed at cutting the usage of oil, gas and coal and increasing the local resources firewood, oil-shale and peat for fuel. The resources of low-valued firewood-brushwood, fallen deadwood etc. are available during the following 10-15 years, but in the future the cultivation of energy forest (willow) plantations will be actual. During the last 20 years the Swedish scientists have been extensively studying the willow forest selection, cultivation and use in energetics and waste water purification systems. A Swedish-Estonian energy forest research project was started in 1993 between the Swedish Agricultural University on one hand and Toravere Observatory, Institute of Zoology and Botany, Estonian Academy of Sciences and Estonian Potato Processing Association on the other hand. In spring 5 willow plantations were established with the help of Swedish colleagues and obtained from Sweden 36000 willow cuttings. The aim of the project: a) To study experimentally and by means of mathematical modelling the biogeophysical aspects of growth and productivity of willow plantations in Sweden and Estonian climatological conditions. b) To study the possibility of using the willow plantations in waste waters purification. c) To study the economical efficiency of energy forest as an energy resource under the economic and environmental conditions of Estonia. d) To study the economic efficiency of willow plantations as a raw material for the basket industry in Estonia. e) To select the most productive and least vulnerable willow clones for practical application in energy plantations. During 1993 in all five plantations detailed analysis of soil properties has been carried out. In the plantation at Toravere Observatory phytometrical measurements were carried out - the growth of plant biomass leaf and stem area, vertical distribution of dry matter content, biomass and phyto area separately for leaves and stems has been performed. Some

  12. Stable, fertile, high polyhydroxyalkanoate producing plants and methods of producing them

    Energy Technology Data Exchange (ETDEWEB)

    Bohmert-Tatarev, Karen; McAvoy, Susan; Peoples, Oliver P.; Snell, Kristi D.

    2015-08-04

    Transgenic plants that produce high levels of polyhydroxybutyrate and methods of producing them are provided. In a preferred embodiment the transgenic plants are produced using plastid transformation technologies and utilize genes which are codon optimized. Stably transformed plants able to produce greater than 10% dwt PHS in tissues are also provided.

  13. High ethanol producing derivatives of Thermoanaerobacter ethanolicus

    Science.gov (United States)

    Ljungdahl, L.G.; Carriera, L.H.

    1983-05-24

    Derivatives of the newly discovered microorganism Thermoanaerobacter ethanolicus which under anaerobic and thermophilic conditions continuously ferment substrates such as starch, cellobiose, glucose, xylose and other sugars to produce recoverable amounts of ethanol solving the problem of fermentations yielding low concentrations of ethanol using the parent strain of the microorganism Thermoanaerobacter ethanolicus are disclosed. These new derivatives are ethanol tolerant up to 10% (v/v) ethanol during fermentation. The process includes the use of an aqueous fermentation medium, containing the substrate at a substrate concentration greater than 1% (w/v).

  14. Noor eesti teater ja Noor-Eesti. Young Estonian Theatre and Young Estonia

    Directory of Open Access Journals (Sweden)

    Katri Aaslav-Tepandi

    2012-04-01

    connections with either theatre: none of them worked at ”Estonia” or ”Vanemuine”, nor did they hold positions in the respective Societies or boards of directors; neither did they have direct influence as creators of a new dramaturgy.Indirectly, however, Young Estonia’s relations with the theatre were very strong: they might even be regarded as the creators of a new idea of the theatre. The Young Estonians’ manifesto for the theatre was Teatri-raamat (Theatre-Book, published on the occasion of the opening of ”Estonia’s” new building in 1913. The authors represented in the volume were Bernhard Linde, Johannes Barbarus, Johannes Semper, Jaan Kärner, Anton Hansen Tammsaare, and Gustav Suits. In Teatri-raamat, Young Estonians critically analyze the development of Estonian theatre, and its place in Estonian culture in light of modern European currents in the arts (psychological realism, symbolism, impressionism, and expressionism. In this article, the ideals of the authors of Teatri-raamat are closely examined and compared with the counterarguments published in newspapers 1916 by Karl Menning, who had by then left the position of director of the Vanemuise theatre. Finally, we will consider the connections between the Young Estonia movement and the dramaturgy of its time, more specifically that of three writers for the theatre: August Kitzberg, Oskar Luts, and Eduard Vilde. Kitzberg interacted intensively with the Young Estonians without sharing their ideals concerning modern art. His plays Tuulte pöörises (In the Whirlwind, ”Enne kukke ja koitu” (Before Cock’s Crow at Dawn, Libahunt (Werewolf, and Kauka Jumal (The God of Kauka were highly esteemed by the Young Estonians. A more indirect influence of the Young Estonians can be seen in the case of young Oskar Luts, who like his contemporaries, was influenced by newer, more modern currents, especially symbolism, along with models such as Hamsun, Strindberg, and Maeterlinck. Luts wrote his plays Laul õnnest

  15. Cost Benefit Analyses of Developing a Legislation to Attract Non-Resident High Net Worth Individuals to Use Estonian Private Foundation Platform

    Directory of Open Access Journals (Sweden)

    Urmas Kaarlep

    2017-05-01

    Full Text Available On a global level, the high net worth population is expanding, and the wealth of high net worth individuals (HNWI is increasing rapidly. For various reasons, high net worth families and individuals are searching for vehicles to assist them in safeguarding and conveniently managing their wealth. Private foundations represent one useful avenue for achieving this end, and the use of private foundations has become increasingly popular in recent years, particularly in European countries. Many countries have laws which regulate private foundations and several are looking for adjusting or introducing legislation. In this article, authors analysing benefits for a country like Estonia in case the country increases the attractiveness of its jurisdiction for non-residents who are looking for establishment of a private foundation. The article comes to the conclusion that to be competitive, a country cannot collect tax revenues from private foundations established by non-residents except from income originated in the very same country. However, the country can earn benefits from revenues received by companies rendering services to non-residents and their private foundations. The article demonstrates that service fees a country earns and taxes collected from these fees would be substantial enough to make necessary changes to legislation beneficial for a country.

  16. MINORITY LANGUAGES IN ESTONIAN SEGREGATIVE LANGUAGE ENVIRONMENTS

    Directory of Open Access Journals (Sweden)

    Elvira Küün

    2011-01-01

    Full Text Available The goal of this project in Estonia was to determine what languages are spoken by students from the 2nd to the 5th year of basic school at their homes in Tallinn, the capital of Estonia. At the same time, this problem was also studied in other segregated regions of Estonia: Kohtla-Järve and Maardu. According to the database of the population census from the year 2000 (Estonian Statistics Executive Office's census 2000, there are representatives of 142 ethnic groups living in Estonia, speaking a total of 109 native languages. At the same time, the database doesn’t state which languages are spoken at homes. The material presented in this article belongs to the research topic “Home Language of Basic School Students in Tallinn” from years 2007–2008, specifically financed and ordered by the Estonian Ministry of Education and Research (grant No. ETF 7065 in the framework of an international study called “Multilingual Project”. It was determined what language is dominating in everyday use, what are the factors for choosing the language for communication, what are the preferred languages and language skills. This study reflects the actual trends of the language situation in these cities.

  17. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P.; Tullus, H.; Uri, V. [Estonian Agricultural University, Tartu (Estonia)

    1996-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  18. Utilisation of Estonian energy wood resources

    Energy Technology Data Exchange (ETDEWEB)

    Muiste, P; Tullus, H; Uri, V [Estonian Agricultural University, Tartu (Estonia)

    1997-12-31

    In the end of the Soviet period in the 1980s, a long-term energy programme for Estonia was worked out. The energy system was planned to be based on nuclear power and the share of domestic alternative sources of energy was low. The situation has greatly changed after the re-establishment of the Estonian independence, and now wood and peat fuels play an important role in the energy system. Energy consumption in Estonia decreased during the period 1970-1993, but this process has less influenced the consumption of domestic renewable fuels - peat and wood. It means that the share of these fuels has grown. The investment on substitution of imported fossil fuels and on conversion of boiler plants from fossil fuels to domestic fuels has reached the level of USD 100 million. The perspectives of the wood energy depend mainly on two factors; the resources and the price of wood energy compared with other fuels. The situation in wood market influences both the possible quantities and the price. It is typical that the quickly growing cost of labour power in Estonia is greatly affecting the price of energy wood. Though the price level of fuel peat and wood chips is lower than the world market price today, the conditions for using biofuels could be more favourable, if higher environmental fees were introduced. In conjunction with increasing utilisation of biofuels it is important to evaluate possible emissions or removal of greenhouse gases from Estonian forests 3 refs.

  19. Is Estonian oil shale beneficial in the future?

    International Nuclear Information System (INIS)

    Reinsalu, Enno

    1998-01-01

    subsidization of oil processing is normal for the state as for an owner of all oil shale industry. Electricity is relatively cheap and the mining company has a possibility for producing concentrated oil shale for processing as a by-product. Particularly the mining company is interested in cash flow and agrees with cheaper trade oil shale concentrates than cost price. The motivation of subsidization on the State level is that the power company can not produce more electricity than it can trade at present, but the oil plant is able to trade all produced shale oil, including export. It is obvious that in the case of privatisation, the subsidisation of oil processing will cease. The power industry is utilising the largest part of the oil shale energy, but is delivering only 11-12% of the oil shale bed energy to the filial consumer. The reason is great losses in generation and distribution of electricity. The oil processing industry is also only delivering a low 10 per cent of the oil shale deposit energy, but oil is not as high quality of an energy form as electricity. A revision has been made of oil shale reserves according to market economy conditions. The bases for the prognosis is the electricity demand projection and the presumption that energy utilisation per gross domestic product must decrease significantly. One takes the energy rating of 35 G J per m 2 (about 10 MWh per m 2 ) as a critical value for a mine able bed. Mining fields have the energy rating from 36.5 to 46.3 G J per m 2 , with an average of 42.2 G J per m 2

  20. Estonian Air valmistub odavate piletitega EasyJeti tulekuks / Erkki Erilaid

    Index Scriptorium Estoniae

    Erilaid, Erkki

    2004-01-01

    Estonian Air pidi langetama piletihindu Berliini ja Londoni liinil kolmandiku võrra, kuna oktoobri lõpust hakkab Tallinna lennujaamast reise tegema uus odavlennufirma Easy-Jet. Lisa: Estonian Airi hinnad internetis

  1. Estonian Air lõpetab Pariisi ja Vilniuse lennud / Hindrek Riikoja

    Index Scriptorium Estoniae

    Riikoja, Hindrek

    2005-01-01

    Talvisele lennuplaanile üleminev Estonian Air lõpetab otselennud Tallinnast Vilniusesse ja Pariisi. Estonian Airi presidendi Borge Thornbechi sõnul kavatseb firma suurendada talvehooajal turismilendude mahtu

  2. Cresco sai lahti võlast SASile ja osalusest Estonian Airis / Rivo Sarapik, Alyona Stadnik

    Index Scriptorium Estoniae

    Sarapik, Rivo, 1981-

    2010-01-01

    Majandus- ja kommunikatsiooniminister Juhan Parts ning SAS-i asepresident Benny Zakrisson kirjutasid alla Estonian Airi ostu-müügitehingule. Investeerimispank Cresco, millele kuulus 17% Estonian Airist, jääb välja Estonian Airi omanikeringist ning SAS-i nõue Crescole tühistatakse

  3. SAS tahab Estonian Airi liita lätlaste firmaga airBaltic / Andres Eilart

    Index Scriptorium Estoniae

    Eilart, Andres

    2007-01-01

    SAS plaanib Estonian Airi ja Läti firma airBalticu liitmisega luua uue lennufirma. Autori hinnangul viitavad Estonian Airi laienemisplaanidele kriipsu peale tõmbamine ja SAS-i investeeringud airBalticusse sellele, et ühendamise käigus "neelab" Läti firma Estonian Airi

  4. Joakim Helenius: Estonian Air võtku eeskuju airBalticust / Siim Sultson

    Index Scriptorium Estoniae

    Sultson, Siim

    2010-01-01

    Estonian Airi ühe võimaliku nõukogu esimehe Jaokim Heleniuse hinnangul on väikeste lennufirmade, nagu Estonian Air ja airBaltic jaoks päris palju tegutsemisruumi. Estonian Airil tuleb leida oma nišš ja kindel, kuid omanäoline strateegia

  5. Economic modelling of the capture-transport-sink scenario of industrial CO2 emissions: The Estonian-Latvian cross-border case study

    NARCIS (Netherlands)

    Shogenova, A.; Shogenov, K.; Pomeranceva, R.; Nulle, I.; Neele, F.; Hendriks, C.

    2011-01-01

    Industrial CO2 emissions and opportunities for CO2 geological storage in the Baltic Region were studied within the EU GeoCapacity project supported by the European Union Framework Programme 6. Estonia produces the largest amounts of CO2 emissions in the region, due to the combustion of Estonian oil

  6. Estonian Airi president : uus äristrateegia toob ettevõttele edu / Borge Thornbech ; interv. Andres Reimer

    Index Scriptorium Estoniae

    Thornbech, Borge

    2007-01-01

    Estonian Air asutas regionaalsete lendude korraldamiseks ettevõtte Estonian Air Regional, idee on arendada tegevust lühidistantsidel ja luua ühenduslüli lennukompanii Euroopa-liinide vahel. Kommenteerivad Olev Schults, Oleg Harlamov, Rein Mark. Vt. samas: Kõik aktsionärid vannuvad Estonian Airile truudust; Estonian Air kaalub Tartu lennuliini avamist. Kaart: Reisijate jagunemine sihtkohtade vahel. Graafikud: Estonian Air kukkus kahjumisse

  7. Construction of acetoin high-producing Bacillus subtilis strain

    Directory of Open Access Journals (Sweden)

    Yanjun Tian

    2016-07-01

    Full Text Available This paper describes the construction and selection of a high-producing mutant, Bacillus subtilis HB-32, with enhanced acetoin yield and productivity. The mutant was obtained by the protoplast fusion of a Bacillus subtilis mutant TH-49 (Val− producing acetoin and Bacillus licheniformis AD-30 producing α-acetolactate decarboxylase, with the fusogen polyethylene glycol and after the regeneration and selection, etc. of the fusant. The acetoin production reached 49.64 g/L, which is an increase of 61.8% compared to that of B. subtilis strain TH-49. Random amplified polymorphic DNA analysis was performed to determine the mutagenic and protoplast fusion effects and the genomic changes in the acetoin high-producing strain compared to the parent strains at the molecular level. The constructed strain was shown to be promising for large-scale acetoin production. Future studies should focus on the application of the mutant strain in practice.

  8. Liberalism - Key to Entrepreneurial and Innovation Success: Estonian Case Study

    Directory of Open Access Journals (Sweden)

    Augustin Ignatov

    2017-12-01

    Full Text Available Since its independence in 1991 Estonia has successfully overpassed the challenges of the transition period being in the present of one the most technologically developed nations of Europe. The present research is intended to evaluate the relationship between Estonian pro-market regulation, entrepreneurship and innovation. In order to reach relevant conclusions in this regard there have been used both qualitative and quantitative methods of analysis. In such a way, it could be comprehensively reviewed the process of Estonian economic development from a relatively underdeveloped USSR republic to an advanced innovation driven economy. The results show that pro-market governmental regulation has favourably influenced Estonian entrepreneurship, while it fostered country’s innovation capacities. It has been concluded that the economic “miracle” of Estonia has been at a great extent determined by proper government regulation oriented towards economic liberalisation.

  9. Chernobyl is still haunting us. Radionuclides in Estonian mushrooms

    International Nuclear Information System (INIS)

    Martin, J.; Vilde, R.; Martin, L.; Aaspollu, J.; Tekko, S.

    1993-01-01

    The disaster that happened at the Chernobyl nuclear power station in 1986 caused a sharp rise in radioactive pollution over an extensive area in the region of the Baltic Sea. To estimate the distribution and the concentration of Cs-137 and Sr-90 in Estonian ecosystems, samples of mushrooms, mosses, lichens and the upper horizons of soil were gathered from 63 test sites during 1991. We were particularly interested in the amounts of radionuclides in mushrooms because these are used as food by people. Dangerously high radionuclide concentrations were found in mushrooms gathered in North-East Estonia. Heightened concentrations were registered here and there all over the territory of Estonia, especially in mushrooms gathered in Central and South-Western Estonia. The Cs-137 content in mushrooms depends on its content in other components of the ecosystems, first and foremost on the concentrations of radiocaesium in mosses and litter, which, therefore, can be used as indicators in prognostication the radioactive pollution of mushrooms in a certain region. As Cs-137 migrates between various ecosystem components, it is necessary to check the radioactivity of the forest products used for food for still a number of years to come. The Sr-90 level was low in all the ecosystem components examined. (author). 3 figs., 10 refs

  10. Detection systems for high energy particle producing gaseous ionization

    International Nuclear Information System (INIS)

    Martinez, L.; Duran, I.

    1985-01-01

    This report contains a review on the most used detectors based on the collection of the ionization produced by high energy particles: proportional counters, multiwire proportional chambers, Geiger-Muller counters and drift chambers. In six sections, the fundamental principles, the field configuration and useful gas mixtures, are discussed, most relevant devices are reported along 90 pages with 98 references. (Author) 98 refs

  11. High energy density in matter produced by heavy ion beams

    International Nuclear Information System (INIS)

    1987-08-01

    This annual report summarizes the results of research carried out in 1986 within the framework of the program 'High Energy Density in Matter Produced by Heavy Ion Beams' which is funded by the Federal Ministry for Research and Technology. Its initial motivation and its ultimate goal is the question whether inertial confinement can be achieved by intense beams of heavy ions. (orig./HSI)

  12. Detection systems for high energy particle producing gaseous ionization

    International Nuclear Information System (INIS)

    Duran, I.; Martinez, L.

    1985-01-01

    This report contains a review on the most used detectors based on the collection of the ionization produced by high energy particles: proportional counters, multiwire proportional chambers, Geiger-Mueller counters and drift chambers. In six sections, the fundamental principles, the field configuration and useful gas mixtures are discussed, most relevant devices are reported. (author)

  13. Functionally graded materials produced with high power lasers

    NARCIS (Netherlands)

    De Hosson, J. T. M.; Ocelik, V.; Chandra, T; Torralba, JM; Sakai, T

    2003-01-01

    In this keynote paper two examples will be present of functionally graded materials produced with high power Nd:YAG lasers. In particular the conditions for a successful Laser Melt Injection (LMI) of SiC and WC particles into the melt pool of A18Si and Ti6Al4V alloys are presented. The formation of

  14. High beta plasma operation in a toroidal plasma producing device

    International Nuclear Information System (INIS)

    Clarke, J.F.

    1978-01-01

    A high beta plasma is produced in a plasma producing device of toroidal configuration by ohmic heating and auxiliary heating. The plasma pressure is continuously monitored and used in a control system to program the current in the poloidal field windings. Throughout the heating process, magnetic flux is conserved inside the plasma and the distortion of the flux surfaces drives a current in the plasma. As a consequence, the total current increases and the poloidal field windings are driven with an equal and opposing increasing current. The spatial distribution of the current in the poloidal field windings is determined by the plasma pressure. Plasma equilibrium is maintained thereby, and high temperature, high beta operation results

  15. Producing titanium-niobium alloy by high energy beam

    Energy Technology Data Exchange (ETDEWEB)

    Sharkeev, Yu. P., E-mail: sharkeev@ispms.tsc.ru [Institute of Strength Physics and Materials Science, SB RAS, 2/4 Akademicheski Prosp., Tomsk, 634055 (Russian Federation); National Research Tomsk Polytechnic University, 30 Lenin Av., Tomsk, 634050 (Russian Federation); Golkovski, M. G., E-mail: golkoski@mail.ru [Budker Institute of Nuclear Physics, 11 Akademika Lavrentiev Prosp., Novosibirsk, 630090 (Russian Federation); Glukhov, I. A., E-mail: gia@ispms.tsc.ru; Eroshenko, A. Yu., E-mail: eroshenko@ispms.tsc.ru; Fortuna, S. V., E-mail: s-fortuna@mail.ru [Institute of Strength Physics and Materials Science, SB RAS, 2/4 Akademicheski Prosp., Tomsk, 634055 (Russian Federation); Bataev, V. A., E-mail: bataev@vadm.ustu.ru [Novosibirsk State Technical University, 20 K. Marx Prosp., Novosibirsk, 630073 (Russian Federation)

    2016-01-15

    The research is involved in producing a Ti-Nb alloy surface layer on titanium substrate by high energy beam method, as well as in examining their structures and mechanical properties. Applying electron-beam cladding it was possible to produce a Ti-Nb alloy surface layer of several millimeters, where the niobium concentration was up to 40% at. and the structure itself could be related to martensite quenching structure. At the same time, a significant microhardness increase of 3200-3400 MPa was observed, which, in its turn, is connected with the formation of martensite structure. Cladding material of Ti-Nb composition could be the source in producing alloys of homogeneous microhardness and desired concentration of alloying niobium element.

  16. Estonian Golf & Country Club / Liina Jänes

    Index Scriptorium Estoniae

    Jänes, Liina, 1977-

    2005-01-01

    Estonian Golf & Country Club'i etnomodernistlik golfikeskus ja klubihoone Jõelähtmel. Projekteerija: Arhitektuuristuudio Siim & Kreis. Autor Andres Siim. Konstruktor: Resand. Sisekujundaja Juta Lember (SAB Lember & Padar). Projekt 2004, valmis 2005. Ill.: I ja II korruse plaan, 3 värv. välis ja 3 sisevaadet

  17. Estonian Golf & Country Clubi klubihoone / Andres Siim, Alar Just

    Index Scriptorium Estoniae

    Siim, Andres

    2005-01-01

    Harjumaal Jõelähtme vallas rajab Estonian Golf & Country Club uut Jägala-Jõesuu spordi- ja puhkekeskust, mille südameks saab puidust golgiklubi hoone, mida tutvustavad klubihoone arhitekt ja üks inseneridest. Ill.: vaade ehitusele, projekti kaks vaadet, lõige

  18. Organizational Commitment in Estonian University Libraries: A Review and Survey

    Science.gov (United States)

    Kont, Kate-Riin; Jantson, Signe

    2014-01-01

    The data used in this article is based on the reviewing of relevant literature to provide an overview of the concepts of organizational commitment, job security, and interpersonal relations, as well as on the results of the original online survey, conducted by the article's authors, held in 2012 in Estonian university libraries governed by public…

  19. Top 10 Estonian albums of 2004 / Igor Garshnek

    Index Scriptorium Estoniae

    Garšnek, Igor, 1958-

    2004-01-01

    Heliplaatidest: Arvo Pärt "Pro et contra", Various composers "Baltic Voices 2", Raimo Kangro "Displays", Toivo Tulev "Be Lost in the Call", Indrek Vau and Mati Mikalai "Estonian Trumpet Music", Erdmann/Sooäär "Dessert Time, Peer Gynt & Other Stories", Alo Mattiisen "50 parimat laulu", Riho Sibul "Must", Rein Rannap "Tantsib klaveril", Eesti Keeled "Kella tiksumist..."

  20. Value Education in Estonian Preschool Child Care Institutions

    Science.gov (United States)

    Ülavere, Pärje; Tammik, Anu

    2017-01-01

    For systematic implementation of value education in educational institutions, the national programme "Values Development in Estonian Society 2009-2013" (Ministry of Education and Research 2009) was prepared in Estonia. However, it was launched only in 2010, and the authors intended to ascertain the values of the heads of preschool child…

  1. Neutrino fluxes produced by high energy solar flare particles

    International Nuclear Information System (INIS)

    Kolomeets, E.V.; Shmonin, V.L.

    1975-01-01

    In this work the calculated differential energy spectra of neutrinos poduced by high energy protons accelerated during 'small' solar flares are presented. The muon flux produced by neutrino interactions with the matter at large depths under the ground is calculated. The obtained flux of muons for the total number of solar flare accelerated protons of 10 28 - 10 32 is within 10 9 - 10 13 particles/cm 2 X s x ster. (orig.) [de

  2. Mutational analysis of COL1A1 and COL1A2 genes among Estonian osteogenesis imperfecta patients.

    Science.gov (United States)

    Zhytnik, Lidiia; Maasalu, Katre; Reimann, Ene; Prans, Ele; Kõks, Sulev; Märtson, Aare

    2017-08-15

    Osteogenesis imperfecta (OI) is a rare bone disorder. In 90% of cases, OI is caused by mutations in the COL1A1/2 genes, which code procollagen α1 and α2 chains. The main aim of the current research was to identify the mutational spectrum of COL1A1/2 genes in Estonian patients. The small population size of Estonia provides a unique chance to explore the collagen I mutational profile of 100% of OI families in the country. We performed mutational analysis of peripheral blood gDNA of 30 unrelated Estonian OI patients using Sanger sequencing of COL1A1 and COL1A2 genes, including all intron-exon junctions and 5'UTR and 3'UTR regions, to identify causative OI mutations. We identified COL1A1/2 mutations in 86.67% of patients (26/30). 76.92% of discovered mutations were located in the COL1A1 (n = 20) and 23.08% in the COL1A2 (n = 6) gene. Half of the COL1A1/2 mutations appeared to be novel. The percentage of quantitative COL1A1/2 mutations was 69.23%. Glycine substitution with serine was the most prevalent among missense mutations. All qualitative mutations were situated in the chain domain of pro-α1/2 chains. Our study shows that among the Estonian OI population, the range of collagen I mutations is quite high, which agrees with other described OI cohorts of Northern Europe. The Estonian OI cohort differs due to the high number of quantitative variants and simple missense variants, which are mostly Gly to Ser substitutions and do not extend the chain domain of COL1A1/2 products.

  3. Vacancy supersaturations produced by high-energy ion implantation

    International Nuclear Information System (INIS)

    Venezia, V.C.; Eaglesham, D.J.; Jacobson, D.C.; Gossmann, H.J.

    1998-01-01

    A new technique for detecting the vacancy clusters produced by high-energy ion implantation into silicon is proposed and tested. This technique takes advantage of the fact that metal impurities, such as Au, are gettered near one-half of the projected range (1/2 R p ) of MeV implants. The vacancy clustered region produced by a 2 MeV Si + implant into silicon has been labeled with Au diffused in from the front surface. The trapped Au was detected by Rutherford backscattering spectrometry (RBS) to profile the vacancy clusters. Cross section transmission electron microscopy (XTEM) analysis shows that the Au in the region of vacancy clusters is in the form of precipitates. By annealing MeV implanted samples prior to introduction of the Au, changes in the defect concentration within the vacancy clustered region were monitored as a function of annealing conditions

  4. [Tobacco--a highly efficient producer of vaccines].

    Science.gov (United States)

    Budzianowski, Jaromir

    2010-01-01

    Along with the depreciation of tobacco as a source of nicotine-containing commercial products, the increase of its appreciation as a potential producer of recombinant therapeutical proteins can be observed. Two species of tobacco--Nicotiana tabacum L. and N. benthamiana are easily grown by well established methods of field or green-house cultivation or cell culture, yield high biomass and soluble protein content, can be easily transformed by several methods and are not food for humans or feed for animals. Expression of foreign proteins, including vaccines, can be achieved in those plants either through stable transformation of nuclear or plastid (chloroplast) genomes or by transient transformation using infection with plant virus or bacteria--Agrobacterium tumefaciens (agroinfiltration). The most advanced mode of agrofiltration termed magnifection, which combines benefits of virus and Agrobacterium and depends on using Agrobacterium with viral pro-vectors, enables high-yield and rapid expression of therapeutical proteins, even in a few days, and can be employed on an industrial scale. Expression of many antigenic proteins, which may serve as antiviral, antibacterial, antiprotozoan and anticancer vaccines, and additionally a few autoantigens designed for the treatment of autoimunogenic diseases, like diabetes, have been achieved in tobacco. To date, a vaccine against Newcastle virus disease in poultry produced by tobacco cell culture has been approved for commercial application and several other vaccines are in advanced stage of development. The possibility of a high-level production of vaccines in tobacco against pandemic influenza or anthrax and plague due to a bioterroristic attack, as well as of individualised anticancer vaccines against non-Hodgkin's lymphoma (NHL) in a much shorter period of time than by traditional methods became realistic and hence caused increased interest in tobacco as a high-efficient producer of vaccines not only of specialistic

  5. Structural bursts produced by high energy muons in the rock

    International Nuclear Information System (INIS)

    Honda, K.; Takahashi, T.; Teramoto, Y.; Higashi, S.; Ozaki, S.

    1975-01-01

    Lateral structures of bursts produced by high energy muons in the rock have been observed at a depth 30 mw. e. underground by use of two layers of proportional counters. The running times were 7940 hr. The number of structural bursts observed, which have two cores in the both layers ( 1 >= 200, N 2 >= 20 particles) is 110, 1.6% of total events. These structural bursts have two types; 1) incident directions of two cores are parallel, 2) two cores intersect in the rock within 2 m above the roof of the tunnel. The events of this 2) type have large transverse momentum. (orig.) [de

  6. [Pärtel Lippus. The acoustic features and perception of the Estonian quantity system] / Stefan Werner

    Index Scriptorium Estoniae

    Werner, Stefan

    2012-01-01

    Arvustus: Pärtel Lippus. The acoustic features and perception of the Estonian quantity system. Tartu : Tartu University Press, 2011. (Dissertationes philologiae estonicae Universitatis Tartuensis ; 29)

  7. Organizational culture based on the example of an Estonian hospital.

    Science.gov (United States)

    Saame, Iisi; Reino, Anne; Vadi, Maaja

    2011-01-01

    The concept of organisational culture (also referred to later as OC) is one of the approaches in modern organisational analysis exploring the values, attitudes and beliefs behind human behaviour in the workplace. OC as a social phenomenon is considered to be important for the sustainability of every organisation. In the service sector, OC may affect the nature and quality of the services provided. The aim of this paper is twofold: on the one hand, to highlight the patterns of OC in a hospital; and, on the other hand, to outline relationships between OC and patient satisfaction. The study was conducted in Tartu University Hospital, one of the most influential health care organisations in Estonia. This paper has original value by presenting an insight into organisational culture in the Estonian health care sector, and the findings of the study will expand knowledge of OC in the health care sector in general. The OC instrument applied in a quantitative cross-sectional study was earlier developed according to the Competing Values Framework (CVF). Data from 456 medical and non-medical professionals were analysed using non-parametric tests of descriptive statistics. A factor analysis was performed to assess the instrument's compatibility for analysing the OC pattern in the health care sector. The dominant culture type in all the groups investigated was the Internal Processes type, mainly followed by the Rational Goal type, while different cultural patterns were observed in professional groups. The factor analysis yielded a three-subscale solution. Clinics with high patient satisfaction did not score more than clinics with low patient satisfaction in terms of the Human Relations type. In future studies a random sample design and a multidisciplinary approach to OC research should be followed in order to further explore OC patterns in hospitals and their consequences for different aspects of hospital performance.

  8. Pulsed discharges produced by high-power surface waves

    Science.gov (United States)

    Böhle, A.; Ivanov, O.; Kolisko, A.; Kortshagen, U.; Schlüter, H.; Vikharev, A.

    1996-02-01

    The mechanisms of the ionization front advance in surface-wave-produced discharges are investigated using two experimental set-ups. The high-power surface waves are excited in a 3 cm wavelength band by a surfaguide and a novel type of launcher (an E-plane junction). The ionization front velocity of the surface wave is measured for a wide range of gas pressures, incident microwave power and initial pre-ionization. The experimental results are compared with theoretical ones based on three different models. The comparison between theory and experiment allows one to suggest a new interpretation of the ionization front's advance. The ionization front velocity is determined by a breakdown wave or an ionization wave in the electric field of a high-power surface wave in the zone near the ionization front.

  9. High resolution X-ray spectromicroscopy of laser produced plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Faenov, A.Ya. [Multi-charged Ions Spectra Data Center of VNIIFTRI (MISDC), Mendeleevo, Moscow region, (Russian Federation)

    2000-01-01

    In recent years new classes of X-ray spectroscopic instruments possessing both dispersive and focusing properties have been manufactured. Their principal advantage over more traditional instruments is that they combine very high luminosity with high spatial resolution, while preserving the highest possible spectral resolution of their dispersive elements. These instruments opened up the registration of plasmas in new regimes and surroundings. The measurements delivered new information about the properties of even previously studied traditional plasma objects (e.g. ns-laser produced plasmas). Also the detailed investigation of relatively new plasma laboratory sources with very small dimensions and low energy content (e.g. mJ fs-laser pulses) became possible. The purpose of this report is to give a short review of the experimental and theoretical results obtained in the past few years by MISDC (Multi-charged Ions Spectra Data Center) research team in the field of X-ray spectroscopy of a laser-produced plasma. Experimental spectra have been obtained at various laser installations with nanosecond, sub-nanosecond, picosecond and sub-picosecond pulses interacting with solid, gaseous or cluster targets in collaborations with research teams from Russia, USA, Germany, France, Poland, Belgium, Italy, China and Israel. Practically all results have been obtained with the help of spectrographs with spherically bent mica crystals operating in FSSR-1D, 2D schemes. (author)

  10. Estonian Air püüdis viimase hetkeni Top Toursi päästa / Mirko Ojakivi

    Index Scriptorium Estoniae

    Ojakivi, Mirko

    2010-01-01

    Estonian Air kaalus Top Toursile appiminekut, sest reisifirma oli Estonian Airil üks olulisemaid koostööpartnereid. Abi oleks puudutanud ennekõike uutele lendudele allahindluse tegemist, räägiti ka võimalikust krediidist

  11. Mental health and alcohol problems among Estonian cleanup workers 24 years after the Chernobyl accident.

    Science.gov (United States)

    Laidra, Kaia; Rahu, Kaja; Tekkel, Mare; Aluoja, Anu; Leinsalu, Mall

    2015-11-01

    To study the long-term mental health consequences of the 1986 Chernobyl nuclear accident among cleanup workers from Estonia. In 2010, 614 Estonian Chernobyl cleanup workers and 706 geographically and age-matched population-based controls completed a mail survey that included self-rated health, the Posttraumatic Stress Disorder Checklist (PCL), alcohol symptoms (AUDIT), and scales measuring depressive, anxiety, agoraphobia, fatigue, insomnia, and somatization symptoms. Respondents were dichotomized into high (top quartile) and low symptom groups on each measure. Logistic regression analysis detected significant differences between cleanup workers and controls on all measures even after adjustment for ethnicity, education, marital status, and employment status. The strongest difference was found for somatization, with cleanup workers being three times more likely than controls to score in the top quartile (OR = 3.28, 95% CI 2.39-4.52), whereas for alcohol problems the difference was half as large (OR = 1.52, 95% CI 1.16-1.99). Among cleanup workers, arrival at Chernobyl in 1986 (vs. later) was associated with sleep problems, somatization, and symptoms of agoraphobia. The toll of cleanup work was evident 24 years after the Chernobyl accident among Estonian cleanup workers indicating the need for focused mental health interventions.

  12. Radon in Estonian buildings. Establishment of a measurement system and obtained results

    International Nuclear Information System (INIS)

    Pahapill, L.; Rulkov, A.; Swedjemark, G.A.

    1996-12-01

    One purpose of this project was the establishment of a radon monitoring programme inside the state environmental monitoring programme. Another purpose was to investigate regions, expected to have high radon levels indoors. A new method for the long-term measurement of indoor radon was established and the staff for these measurements was trained. The results of the measurement can be used by Estonian decision-makers to work out rules and standards. There is no legislative act in the field of radiation in Estonian at this time. To summarize the results of the measurements we can say that indoor radon concentrations vary by region. The radon investigations must be continued to identify the risk areas and types of housing construction. The results of the state radon monitoring are provided to the municipalities, who advice the owners of planned new houses to select the right construction for the house. A new project will follow with an investigation of radon in randomly selected dwellings, training and equipment for radon measurement in soil, and general advice with regard to radon, as well as assistance in preparing information about radon. 7 refs, 5 figs

  13. Vene kirjandus venestusaja eesti koolides. Russian Literature in the Estonian Schools of the Russification Era

    Directory of Open Access Journals (Sweden)

    Ülle Pärli

    2012-04-01

    Full Text Available This article aims to give an overview of literary instruction in schools of the russification era at the beginning of the 20th century in Estonia; this was likewise the curriculum of literary study offered to the generation of educated youth which included the Young Estonians. Based on official documents, archival materials, and memoirs, and through analyses of anthologies, literary histories, and teaching methods in use at the time, we attempt to reconstruct the outlines of literary reading and requirements for students in various types of schools. When, as a result of school reform, Russian became the language of instruction; lessons in Russian became central in the curriculum, alongside the word of God; selections from Russian literature were read in the original language. In the lower grades, teaching was by the so-called ”natural method”, intended to guarantee swift achievement of fluency in ”living Russian language”; this was later replaced by systematic textual analysis, which distinguished between belles lettres and other types of texts. However, the study of literature was always subordinated to the goals of language instruction. In institutions of secondary education, study of Russian literature was separate from language instruction. Indeed, Russian literature was the only literature systematically studied in high schools (though one must keep in mind that not all schools completely followed the official program. Private schools were especially noticeable for their greater freedom, though all of them had to take general curriculum directives into account. Reading of literary texts connected with other languages thus had to remain almost purely illustrative. In view of the above, in the upper grades of elementary school and high school, students obtained a thorough introduction to the Russian classics. According to the official school curriculum, Russian literary history ended with Nikolai Gogol. Attempts were made to ignore

  14. The Estonian study of Chernobyl cleanup workers. I. Introduction

    International Nuclear Information System (INIS)

    Rahu, Mati

    1999-01-01

    The most comprehensive epidemiological project ever performed in Estonia - The Estonian Study of Chernobyl Cleanup Workers - was the joint effort of researchers from Estonia, Finland and USA. Until September 1999, the results of this study were published in English only. To familiarize the readership of 'Eesti Arst' with the major study findings, the abridged versions of four original papers from 'Radiation Research' are presented in the current issue of the journal. For the Estonian epidemiologists, the work under this project that consists of eight sub projects was a real challenge. In the course of the study, skills were developed in writing a study protocol, preparing a questionnaire, progress reporting, documenting the structure of databases, record linkage, and problem solving. It was an exciting experience to work with top scientists like William Bigbee, John Boice, Timo Hakulinen, Ronald Jensen and Gayle Littlefield. (author)

  15. Critical Success Factors and information needs in Estonian industry

    Directory of Open Access Journals (Sweden)

    Aiki Tibar

    2002-01-01

    Full Text Available The article reports the results of the study on the critical success factors and related information needs in Estonian industry conducted in 1999. Data were collected by interviews with 27 managers and engineers from 16 manufacturing companies in various industries. Most of the critical success factors taken up were related to marketing, information management, quality management, product development and technological innovations. The information needs of managers and engineers were related to competitors, customers, markets, technology, regulations, etc. Some identified CSFs expressed also priorities for development by Estonian economic authorities: to support the implementation of new technologies and introduction of quality management methods. The finding that information management was perceived as a very critical area supports the result of the recent Finnish study on CSFs.

  16. Exhibition of photography from the Estonian diaspora / Ellu Maar

    Index Scriptorium Estoniae

    Maar, Ellu, 1982-

    2010-01-01

    Näitus "Photography from the Estonian Diaspora / Väliseesti foto" Kumu Kunstimuuseumis 8.10.-19.11.2010, kuraatorid Eha Komissarov ja Ellu Maar. Näitus tutvustas 1944. a. Eestist lahkunud või juba võõrsil sündinud fotograafide (Eric Soovere, Karl Hintzer, Priit Vesilind, Rein Välme jt.) loomingut ja valikut väliseesti fotoarhiividest

  17. Estonian Leader's Freedom Call Creates Storm / Anna Smolchenko

    Index Scriptorium Estoniae

    Smolchenko, Anna

    2008-01-01

    President Toomas Hendrik Ilvese esinemisest soome-ugri rahvaste maailmakongressil Hantõ-Mansiiskis, kohtumisest Venemaa presidendi Dmitri Medvedeviga, Eesti delegatsiooni saalist väljamarssimisest Venemaa riigiduuma väliskomisjoni esimehe Konstantin Kossatshovi sõnavõtu ajal. Ilmunud ka: St. Petersburg Times 1. juuli 2008, pealk.: Estonian Leader's Freedom Call Creates Controversy (lüh.). Vabariigi President töövisiidil Venemaal 27.-30.06.2008

  18. Comparative analysis of idiom selection and sequencing 5 in Estonian basic school EFL coursebooks

    Directory of Open Access Journals (Sweden)

    Rita Anita Forssten

    2017-05-01

    Full Text Available The article investigates the selection and sequencing of the idioms encountered in two locally-produced and international coursebook series currently employed in Estonian basic schools. It is hypothesized that there exists a positive correlation between idioms’ difficulty and coursebooks’ language proficiency level. The hypothesis is tested through a statistical analysis of the idioms found which are categorized in terms of their analysability into three categories where category 1 includes analysable semi-literal idioms, category 2 comprises analysable semi-transparent idioms, and category 3 encompasses non-analysable opaque idioms, and then analysed through an online language corpus (British National Corpus. The results of the study reveal that the coursebook authors under discussion have disregarded idioms’ frequency as a criterion for selection or sequencing, whereas the factor utilized to some extent is the degree of analysability.

  19. Efficiency of Estonian grain farms in 2000 2004

    Directory of Open Access Journals (Sweden)

    N. VASILIEV

    2008-12-01

    Full Text Available The aim of this study is to analyse the efficiency of Estonian grain farms after Estonia’s transition to a market economy and during the accession period to the European Union (EU. The non-parametric method Data Envelopment Analysis (DEA was used to estimate the total technical, pure technical and scale efficiency of Estonian grain farms in 2000–2004. Mean total technical efficiency varied from 0.70 to 0.78. Of the grain farms 62% are operating under increasing returns to scale. Solely based on the DEA model it is not possible to determine optimum farm scale and the range of Estonian farm sizes operating efficiently is extensive. The most pure technically efficient farms were the smallest and the largest but the productivity of small farms is low compared to larger farms because of their small scale. Therefore, they are the least competitive. Since pre-accession period to the EU, large input slacks of capital have replaced the former excessive use of labour and land. This raises the question about the effects on efficiency of the EU’s investment support schemes in new member states.;

  20. Revisiting the Estonian Cyber Attacks: Digital Threats and Multinational Responses

    Directory of Open Access Journals (Sweden)

    Stephen Herzog

    2011-01-01

    Full Text Available In April 2007, the Estonian Government moved a memorial commemorating the Soviet liberation of the country from the Nazis to a less prominent and visible location in Tallinn. This decision triggered rioting among Russian-speaking minorities and cyber terrorism targeting Estonia's critical economic and political infrastructure. Drawing upon the Estonian cyber attacks, this article argues that globalization and the Internet have enabled transnational groups—such as the Russian diaspora—to avenge their grievances by threatening the sovereignty of nation-states in cyberspace. Sophisticated and virtually untraceable political "hacktivists" may now possess the ability to disrupt or destroy government operations, banking transactions, city power grids, and even military weapon systems. Fortunately, western countries banded together to effectively combat the Estonian cyber attacks and minimize their effects. However, this article concludes that in the age of globalization, interdependence, and digital interconnectedness, nation-states must engage in increased cooperative cyber-defense activities to counter and prevent devastating Internet attacks and their implications.

  1. High energy density in matter produced by heavy ion beams

    International Nuclear Information System (INIS)

    1989-07-01

    This Annual Report summarizes research activities carried out in 1988 in the framework of the government-funded program 'High Energy Density in Matter produced by Heavy Ion Beams'. It addresses fundamental problems of the generation of heavy ion beams and the investigation of hot dense plasmas produced by these beams. Its initial motivation and its long-term goal is the feasibility of inertial confinement fusion by intense heavy ion beams. Two outstanding events deserve to be mentioned explicity, the Heavy Ion Inertial Fusion Conference held in Darmstadt and organized by GSI end of June and the first heavy ion beam injected into the new SIS facility in November. The former event attracted more than hundred scientists for three days to the 4th Conference in this field. This symposium showed the impressive progress since the last conference in Washington two years ago. In particular the first beams in MBE-4 at LBL and results of beam plasma interaction experiments at GSI open new directions for future investigations. The ideas for non-Lionvillean injection into storage rings presented by Carlo Rubbia will bring the discussion of driver scenarios into a new stage. The latter event is a milestone for both machine and target experiments. It characterizes the beginning of the commissioning phase for the new SIS/ESR facility which will be ready for experiments at the end of this year. The commissioning of SIS is on schedule and first experiments can start at the beginning of 1990. A status report of the accelerator project is included. Theoretical activities were continued as in previous years, many of them providing guide lines for future experiments, in particular for the radiation transport aspects and for beam-plasma interaction. (orig.)

  2. Olev Schults : SAS vajab Estonian Airi rahvusliku lennufirmana / Olev Schults ; interv. Andres Reimer

    Index Scriptorium Estoniae

    Schults, Olev

    2008-01-01

    Estonian Airi nõukogu esimees vastab küsimustele, kas SAS arendas Läti airBalticut Estonian SAS-i arvel, mis mõte on rahvuslikul lennukompaniil, kui riik ei tohi seda finantseerida, kuidas mõjutab investorite meeleolu SAS-i Eestis tabanud poliitikute kriitika tulv

  3. The Representation of the Cold War in Three Estonian History Textbooks

    Science.gov (United States)

    Korbits, Keit

    2015-01-01

    The article looks at the discursive strategies different Estonian history textbooks employ to represent the Cold War period, and the "commonsense" ideologies instilled through these representations. The textbooks analysed include two history books dating back to the Estonian Soviet Socialist Republic and, for contrast, one written during…

  4. Uniting the Divided Continent. The Estonian National Committee of the European Movement

    Directory of Open Access Journals (Sweden)

    Pauli Heikkilä

    2010-12-01

    Full Text Available The article examines the exiled Estonian politicians in the European Movement in the early Cold War period. The ultimate goal of exiled Estonians was to restore their state’s independence. In order to promote this, Estonian leaders sought connections with Western leaders. The European Movement was the only organisation involving actors from both the East and the West, and this corresponded to the Estonian discourse on Europe as a whole. Therefore, the European Movement was appreciated, although its limited opportunities for decisive actions were also recognised. East and West European interest in the European Movement declined as West European integration rapidly intensified through the European Coal and Steel Community (ECSC and particularly after the January 1952 Eastern European Conference in London. By 1957, disappointment in the inability of European unification to help regain Estonian independence became evident.

  5. Hydrophilic functionalized silicon nanoparticles produced by high energy ball milling

    Science.gov (United States)

    Hallmann, Steffen

    The mechanochemical synthesis of functionalized silicon nanoparticles using High Energy Ball Milling (HEBM) is described. This method facilitates the fragmentation of mono crystalline silicon into the nanometer regime and the simultaneous surface functionalization of the formed particles. The surface functionalization is induced by the reaction of an organic liquid, such as alkynes and alkenes with reactive silicon sites. This method can be applied to form water soluble silicon nanoparticles by lipid mediated micelle formation and the milling in organic liquids containing molecules with bi-functional groups, such as allyl alcohol. Furthermore, nanometer sized, chloroalkyl functionalized particles can be synthesized by milling the silicon precursor in the presence of an o-chloroalkyne with either alkenes or alkynes as coreactants. This process allows tuning of the concentration of the exposed, alkyl linked chloro groups, simply by varying the relative amounts of the coreactant. The silicon nanoparticles that are formed serve as the starting point for a wide variety of chemical reactions, which may be used to alter the surface properties of the functionalized nanoparticles. Finally, the use of functionalized silicon particles for the production of superhydrophobic films is described. Here HEBM proves to be an efficient method to produce functionalized silicon particles, which can be deposited to form a stable coating exhibiting superhydrophobic properties. The hydrophobicity of the silicon film can be tuned by the milling time and thus the resulting surface roughness of the films.

  6. A light hydrocarbon fuel processor producing high-purity hydrogen

    Science.gov (United States)

    Löffler, Daniel G.; Taylor, Kyle; Mason, Dylan

    This paper discusses the design process and presents performance data for a dual fuel (natural gas and LPG) fuel processor for PEM fuel cells delivering between 2 and 8 kW electric power in stationary applications. The fuel processor resulted from a series of design compromises made to address different design constraints. First, the product quality was selected; then, the unit operations needed to achieve that product quality were chosen from the pool of available technologies. Next, the specific equipment needed for each unit operation was selected. Finally, the unit operations were thermally integrated to achieve high thermal efficiency. Early in the design process, it was decided that the fuel processor would deliver high-purity hydrogen. Hydrogen can be separated from other gases by pressure-driven processes based on either selective adsorption or permeation. The pressure requirement made steam reforming (SR) the preferred reforming technology because it does not require compression of combustion air; therefore, steam reforming is more efficient in a high-pressure fuel processor than alternative technologies like autothermal reforming (ATR) or partial oxidation (POX), where the combustion occurs at the pressure of the process stream. A low-temperature pre-reformer reactor is needed upstream of a steam reformer to suppress coke formation; yet, low temperatures facilitate the formation of metal sulfides that deactivate the catalyst. For this reason, a desulfurization unit is needed upstream of the pre-reformer. Hydrogen separation was implemented using a palladium alloy membrane. Packed beds were chosen for the pre-reformer and reformer reactors primarily because of their low cost, relatively simple operation and low maintenance. Commercial, off-the-shelf balance of plant (BOP) components (pumps, valves, and heat exchangers) were used to integrate the unit operations. The fuel processor delivers up to 100 slm hydrogen >99.9% pure with <1 ppm CO, <3 ppm CO 2. The

  7. Sources and distribution of trace elements in Estonian peat

    Science.gov (United States)

    Orru, Hans; Orru, Mall

    2006-10-01

    This paper presents the results of the distribution of trace elements in Estonian mires. Sixty four mires, representative of the different landscape units, were analyzed for the content of 16 trace elements (Cr, Mn, Ni, Cu, Zn, and Pb using AAS; Cd by GF-AAS; Hg by the cold vapour method; and V, Co, As, Sr, Mo, Th, and U by XRF) as well as other peat characteristics (peat type, degree of humification, pH and ash content). The results of the research show that concentrations of trace elements in peat are generally low: V 3.8 ± 0.6, Cr 3.1 ± 0.2, Mn 35.1 ± 2.7, Co 0.50 ± 0.05, Ni 3.7 ± 0.2, Cu 4.4 ± 0.3, Zn 10.0 ± 0.7, As 2.4 ± 0.3, Sr 21.9 ± 0.9, Mo 1.2 ± 0.2, Cd 0.12 ± 0.01, Hg 0.05 ± 0.01, Pb 3.3 ± 0.2, Th 0.47 ± 0.05, U 1.3 ± 0.2 μg g - 1 and S 0.25 ± 0.02%. Statistical analyses on these large database showed that Co has the highest positive correlations with many elements and ash content. As, Ni, Mo, ash content and pH are also significantly correlated. The lowest abundance of most trace elements was recorded in mires fed only by precipitation (ombrotrophic), and the highest in mires fed by groundwater and springs (minerotrophic), which are situated in the flood plains of river valleys. Concentrations usually differ between the superficial, middle and bottom peat layers, but the significance decreases depending on the type of mire in the following order: transitional mires - raised bogs - fens. Differences among mire types are highest for the superficial but not significant for the basal peat layers. The use of peat with high concentrations of trace elements in agriculture, horticulture, as fuel, for water purification etc., may pose a risk for humans: via the food chain, through inhalation, drinking water etc.

  8. Re-conceptualizing mother tongue tuition of Estonian abroad as a transnational phenomenon

    Directory of Open Access Journals (Sweden)

    Maarja Siiner

    2017-05-01

    Full Text Available The governmental initiative called the Compatriots Programme, which supports language tuition in Estonian schools and societies abroad, reveals an increased interest in developing intergenerational language transmission in the growing Estonian diaspora. This transnational language political activity signals a new era in language policy, where nation states are increasingly decentralized by migration. The evaluation of the program furthermore reveals that organizing such schools requires a willingness to take language political agency, typically conducted by well-educated and well-integrated resourceful transnational multilingual parents. The present article outlines the results of an ethnographic study of the process of establishing the Estonian School in Copenhagen. This step has demanded a change in the mindset still prevailing in Estonia that language political activities, such as planning language acquisition, are solely the responsibility of the state. Since the prevailing language ideology in Denmark is not favorable towards multilingualism in migrant languages, intergenerational language transmission furthermore presupposes a feeling of ownership of the language and high language self-esteem. "Hargmaise keelepoliitika sünd. Eesti keeleõppe korraldamise võimalikkusest välismaal Taani näitel" Hargmaisus, kasvav väljarändajate arv ja sellega ka eesti keele rääkijate hulk välismaal on jätnud oma jälje eesti keelepoliitikale. Kui varem uuriti peamiselt seda, kuidas eesti keel muukeelses kontekstis muutub, siis viimasel kümnendil on riik asunud aktiivselt toetama eesti keele jätkuvat kasutamist välismaal, rahastades rahvuskaaslaste programmi abil haridusprogramme. Kuid millised faktorid määravad selle, kas uus eestlaste põlvkond oskab ja tahab eesti keelt rääkida? Artikkel hindab etnograafilises ja sotsiolingvistilises võtmes Kopenhaagenis kolm aastat tegutsenud Eesti Kooli ja Lasteklubi näitel, millised on keelekasutust

  9. Diagnostics of Shiva Nova produced high yield thermonuclear events

    International Nuclear Information System (INIS)

    Ahlstrom, H.G.; Banner, D.L.; Boyle, M.J.; Campbell, E.M.; Coleman, L.W.; Koppel, L.N.; Kornblum, H.N. Jr.; Rienecker, F.; Severyn, J.R.; Slivinsky, V.W.

    1978-01-01

    Experiments with the Shiva Nova laser facility which produce yield levels of scientific breakeven and above will result in neutron, x-ray and particle fluxes which will require specific attention to the survivability of diagnostic instrumentation. These yield levels will also allow the utilization of new diagnotics techniques which can provide detailed information on the state of the imploded fuel and pusher shells

  10. Estonian Language of Technology as a Factor Supporting the Evolution of Engineering Thinking

    Directory of Open Access Journals (Sweden)

    Mägi, Vahur

    2013-03-01

    Full Text Available Casual mention of teaching technology subjects in Estonian schools dates back several centuries. Navigation and construction were amongthe earliest professional skills that were taught. As both of them required mathematical thinking skills, teaching the subjects was usually accompanied by explaining the principles of mathematics. The first technology book in Estonian was published about two centuries ago and it dealed with geodesy. The earliest Estonian glossaries of technological terminology were published in the fields of physics and chemistry. The rise of Estonian as a language of higher education and science in the country came about in the 1920s and 1930s. Faculty members of the Tallinn School of Technology then published the first textbooks composed in the Estonian language for students of technology. The Estonian Society for Technology and the Estonian Association of Engineers became seriously involved in linguistic activities. Together with the Vocational Teachers’ Assembly of Tartu they published an illustrated technology glossary for machinery and tools terms. It was followed by a glossary of construction and building terms, compiled under the lead of the University of Technology. In addition, journals of technology introducedinnovations in the lexicon of technology to the general public. The postwar period in the development of the lexicon of technical terms was of little significance at first. A surge in language creativity could be detected in the 1960s, when terminology became a target of constantly growing attention to the development of technology lexicon. Series of technology glossaries were published. This tendency has continued to this day.

  11. E-Banking: Risk Management Practices of the Estonian Banks

    OpenAIRE

    Dmitri Sokolov

    2007-01-01

    During the last years the development of e-banking in Estonia has been very significant. According to the report of the World Economic Forum, the Estonian IT-development has been substantial. The success of e-banking in Estonia can be compared to the corresponding success of the Nordic countries. According to the Deutsche Bank Research, around 70-80% of the Internet users in Estonia use Internet banking and in this respect, Estonia could be compared to Finland, Norway and Iceland. Despite of ...

  12. High capacity adsorption media and method of producing

    Science.gov (United States)

    Tranter, Troy J.; Mann, Nicholas R.; Todd, Terry A.; Herbst, Ronald S.

    2010-10-05

    A method of producing an adsorption medium to remove at least one constituent from a feed stream. The method comprises dissolving and/or suspending at least one metal compound in a solvent to form a metal solution, dissolving polyacrylonitrile into the metal solution to form a PAN-metal solution, and depositing the PAN-metal solution into a quenching bath to produce the adsorption medium. The at least one constituent, such as arsenic, selenium, or antimony, is removed from the feed stream by passing the feed stream through the adsorption medium. An adsorption medium having an increased metal loading and increased capacity for arresting the at least one constituent to be removed is also disclosed. The adsorption medium includes a polyacrylonitrile matrix and at least one metal hydroxide incorporated into the polyacrylonitrile matrix.

  13. New initiatives for producing high current electron accelerators

    International Nuclear Information System (INIS)

    Faehl, R.J.; Keinigs, R.K.; Pogue, E.W.

    1996-01-01

    New classes of compact electron accelerators able to deliver multi-kiloamperes of pulsed 10-50 MeV electron beams are being studied. One class is based upon rf linac technology with dielectric-filled cavities. For materials with ε/ε o >>1, the greatly increased energy storage permits high current operation. The second type is a high energy injected betatron. Circulating current limits scale as Β 2 γ 3

  14. Smoking habits and attitudes towards smoking among Estonian physicians.

    Science.gov (United States)

    Pärna, K; Rahu, K; Rahu, M

    2005-05-01

    This study examined the smoking habits and attitudes towards smoking among Estonian physicians. Cross-sectional data for 2668 physicians were gathered by a self-administered postal survey. The current smoking prevalence was 24.9% for male physicians and 10.8% for female physicians. The percentages of ex-smokers were 32.9 and 16.8%, respectively. Smoking prevalence among physicians was below the levels reported for the highest educational bracket of the total population in Estonia. Non-smoking physicians had more unfavourable views towards smoking than those who smoked. The majority of physicians were aware of the association between smoking and various diseases, with significant differences between smokers and non-smokers. Non-smoking physicians were more active in asking patients about smoking habits than those who smoked. Most Estonian physicians, especially those who smoked, failed to perceive themselves as positive role models. This study found a lower prevalence of smoking among physicians compared with the general population, and demonstrated the impact of personal smoking on physicians' attitudes towards smoking. The results provide an important challenge to medical education in Estonia.

  15. Development of a breeding objective for Estonian Holstein cattle

    Directory of Open Access Journals (Sweden)

    E. PÄRNA

    2008-12-01

    Full Text Available Economic weights for milk carrier (water plus lactose, fat and protein yields, calving interval, age at first service, interval between the first service and conception of heifers and length of productive life of Estonian Holsteins were estimated under assumed milk production quota and for non-quota conditions. A bio-economic model of an integrated production system of a closed herd was used. Economic values of milk carrier yield and length of productive life differed between quota and non-quota conditions, but there were only minor differences between those marketing systems in economic values for functional traits. The standardised economic values of the most important traits varied in magnitude between18 to 81% of the economic value for milk yield. Discounting had a substantial impact on the economic value of length of productive life. When defining the breeding objective for Estonian Holstein, the interval between the first service and conception of heifers, and the length of productive life should be included in the breeding goal along with the traits with the highest economic value, milk, fat and protein yield. In the optimum breeding objective, relative weights of production vs. functional traits were 79 and 21%, respectively.;

  16. Acquisition of noun derivation in Estonian and Russian L1

    Directory of Open Access Journals (Sweden)

    Reili Argus

    2018-04-01

    Full Text Available Acquisition of derivation is not a well-studied area in first language research and a comparative approach to the acquisition of derivation in different languages doesn’t exist. There is no information on how a child acquires derivation in a language with a rich and regular system of derivational patterns, or in a language where derivation is productive, but the system of derivational patterns is opaque. According to general ideas of complexity in a language, the child should start to use simplex stems first and, only after that, complex ones, that is, complexity should increase in the course of acquisition. Our paper is intended to address these issues, based on longitudinal child data from typologically different languages, Estonian and Russian. The results revealed significant differences in the acquisition of noun derivation in the two languages under observation. The system of noun derivation is acquired at a faster pace in Russian, while Estonian children have far fewer noun derivatives in their speech and they use different derivation suffixes with less regularity. Even so, the so-called building block model may be applied for both languages only partially.

  17. High intraocular pressure produces learning and memory impairments in rats.

    Science.gov (United States)

    Yuan, Yuxiang; Chen, Zhiqi; Li, Lu; Li, Xing; Xia, Qian; Zhang, Hong; Duan, Qiming; Zhao, Yin

    2017-11-15

    Primary open angle glaucoma (POAG) is a leading cause of irreversible blindness worldwide. Previous MRI studies have revealed that POAG can be associated with alterations in hippocampal function. Thus, the aim of this study was to investigate a relationship between chronic high intraocular pressure (IOP) and hippocampal changes in a rat model. We used behavioural tests to assess learning and memory ability, and additionally investigated the hippocampal expression of pathological amyloid beta (Aβ), phospho-tau, and related pathway proteins. Chronic high IOP impaired learning and memory in rats and concurrently increased Aβ and phospho-tau expression in the hippocampus by altering the activation of different kinase (GSK-3β, BACE1) and phosphatase (PP2A) proteins in the hippocampus. This study provides novel evidence for the relationship between high IOP and hippocampal alterations, especially in the context of learning and memory. Copyright © 2017 Elsevier B.V. All rights reserved.

  18. The high-producing dairy cow and its reproductive performance

    DEFF Research Database (Denmark)

    Dobson, H; Smith, Rf; Royal, Md

    2007-01-01

    There is evidence that the reproductive performance of dairy cows has declined as milk yields have increased over the last 40 years. Identifying the precise cause(s) of this problem may provide focused solutions. Intensive genetic selection for very high yields has reduced fertility, due mainly...... to an increase in postpartum clinical problems, poor expression of oestrus, defective oocytes/embryos and uterine infections. It is a challenge to solve the problem by getting enough food into these cows to meet the high demands of peak milk yields in early lactation, as well as providing the considerable...

  19. degradable protein sources on performance of high-producing dairy ...

    African Journals Online (AJOL)

    with high-quality, low·degradable protein sources prOViding47% UDP is advocated for ... saliva and through the rumen wall (Waldo, 1968). Based on this type of ... of the feed industry, but is based on very little solid evidence. (Huber, 1984). Chalupa ...... of rumen fermentation in relation to ammonia concentration. Br. J. Nutr.

  20. Serological evidence of exposure to globally relevant zoonotic parasites in the Estonian population

    DEFF Research Database (Denmark)

    Lassen, Brian; Janson, Marilin; Viltrop, Arvo

    2016-01-01

    We investigated Estonian population and its selected subgroups for serological evidence of exposure to Ascaris lumbricoides, Echinococcus spp., Taenia solium, Toxocara canis, Toxoplasma gondii, and Trichinella spiralis. Serum samples from 999 adults representing general population, 248 children a...

  1. [Marge Rennit. Eesti muuseumid / Estonian museums] / Tapio Mäkeläinen

    Index Scriptorium Estoniae

    Mäkeläinen, Tapio

    2009-01-01

    Tutvustus: Eesti muuseumid = Estonian museums / [Eesti Muuseumiühing ; koostaja Marge Rennit ; tõlkija Tiina Mällo ; toimetaja Ivi Tammaru ; eessõna: Piret Õunapuu ; kujundaja Marek Allvee]. Tallinn : Oomen, 2008

  2. Problems of contemporary ecology. Temporal changes in Estonian nature and environment

    International Nuclear Information System (INIS)

    Frey, T.

    1997-01-01

    This conference was held 8-9 May 1997 at Tartu, Estonia. The proceedings of the 7. Estonian Conference in Ecology contain the results of mostly original research in environmental science, conservation and natural philosophy

  3. High density terahertz frequency comb produced by coherent synchrotron radiation

    Science.gov (United States)

    Tammaro, S.; Pirali, O.; Roy, P.; Lampin, J.-F.; Ducournau, G.; Cuisset, A.; Hindle, F.; Mouret, G.

    2015-07-01

    Frequency combs have enabled significant progress in frequency metrology and high-resolution spectroscopy extending the achievable resolution while increasing the signal-to-noise ratio. In its coherent mode, synchrotron radiation is accepted to provide an intense terahertz continuum covering a wide spectral range from about 0.1 to 1 THz. Using a dedicated heterodyne receiver, we reveal the purely discrete nature of this emission. A phase relationship between the light pulses leads to a powerful frequency comb spanning over one decade in frequency. The comb has a mode spacing of 846 kHz, a linewidth of about 200 Hz, a fractional precision of about 2 × 10-10 and no frequency offset. The unprecedented potential of the comb for high-resolution spectroscopy is demonstrated by the accurate determination of pure rotation transitions of acetonitrile.

  4. Nanostructured high valence silver oxide produced by pulsed laser deposition

    International Nuclear Information System (INIS)

    Dellasega, D.; Facibeni, A.; Di Fonzo, F.; Russo, V.; Conti, C.; Ducati, C.; Casari, C.S.; Li Bassi, A.; Bottani, C.E.

    2009-01-01

    Among silver oxides, Ag 4 O 4 , i.e. high valence Ag(I)Ag(III) oxide, is interesting for applications in high energy batteries and for the development of antimicrobial coatings. We here show that ns UV pulsed laser deposition (PLD) in an oxygen containing atmosphere allows the synthesis of pure Ag 4 O 4 nanocrystalline thin films, permitting at the same time to control the morphology of the material at the sub-micrometer scale. Ag 4 O 4 films with a crystalline domain size of the order of tens of nm can be deposited provided the deposition pressure is above a threshold (roughly 4 Pa pure O 2 or 20 Pa synthetic air). The formation of this particular high valence silver oxide is explained in terms of the reactions occurring during the expansion of the ablated species in the reactive atmosphere. In particular, expansion of the PLD plasma plume is accompanied by formation of low stability Ag-O dimers and atomic oxygen, providing reactive species at the substrate where the film grows. Evidence of reactive collisions in the expanding ablation plume is obtained by analysis of the plume visible shape in inert and reactive atmospheres. In addition, we show how the dimensionless deposition parameter L, relating the target-to-substrate distance to the ablation plume maximum expansion length, can be used to classify different growth regimes. It is thus possible to vary the stoichiometry and the morphology of the films, from compact and columnar to foam-like, by controlling both the gas pressure and the target-to-substrate distance

  5. High energy density in matter produced by heavy ion beams

    International Nuclear Information System (INIS)

    1986-05-01

    In this report the activities of the GSI Darmstadt (FRG) during 1985 concerning inertial confinement fusion by heavy ion beams. Short communications and abstracts are presented concerning a Z-pinch experiment, heavy ion pumped lasers and X-ray spectroscopy, the study of ion-ion collisions, a RFQ development and beam transport studies, accelerator theory, targets for SIS/ESR experiments, the rayleigh-Taylor instability, studies on the equation of state for matter under high pressure, as well as the development of computer codes. (HSI)

  6. Cheap imports next ordeal for Europe's high-cost producers

    International Nuclear Information System (INIS)

    Chynoweth, E.

    1993-01-01

    About one-third of Europe's 34 cracker and downstream units lost money in the final quarter of 1992, says Chem Systems (London). Average return on capital employed is negative - at the same level as in the gloomy days of the early 1980s - yet average operating rates are 80% now, compared with 65% a decade ago. Margins at what Chem Systems calls leader cracks (naphtha-based units that use good modern practices) are DM42/m.t. ethylene, DM100/m.t. less than they were in 1991. The consultant firm's recent report, European Petrochemical Strategy in the 1990s, suggests closure of 5%-10% of high-cost production. But, Chem Systems director Roger Longley states: We are not advocating wholesale closure. There are a small number (of plants) where additional investment would not payback that would be economical to shut. Cost reduction through mergers and acquisitions and operational changes is much more important, especially from an international aspect, Longley says. One thing people do not fully appreciate is that Europe is a high-cost region for petrochemical production, he adds. Traditionally, Europe exports 5% of its ethylene output, now it needs to tolerate cheap imports

  7. Transport of accelerator produced high energy neutrons though concrete

    International Nuclear Information System (INIS)

    Prabhakar Rao, G.; Sarkar, P.K.

    1996-01-01

    Development of a computational system for estimating the production and transport of high energy neutrons in particle accelerators is reported. The energy-angle distribution of neutrons from accelerated ions bombarding thick targets is calculated by a hybrid nuclear reaction model code, ALICE-91, modified to suit the purpose. Subsequent transmission of these neutrons through concrete slabs is treated using the anisotropic source-flux iteration technique (ASFIT) in the framework of a coupled neutron-gamma transport. Several parameters of both the codes have been optimized to obtain the transmitted dose through concrete. The calculations are found to be accurate and at the same time faster compared to the detailed Monte Carlo calculations. (author). 8 refs., 2 figs

  8. Survey of industry methods for producing highly reliable software

    International Nuclear Information System (INIS)

    Lawrence, J.D.; Persons, W.L.

    1994-11-01

    The Nuclear Reactor Regulation Office of the US Nuclear Regulatory Commission is charged with assessing the safety of new instrument and control designs for nuclear power plants which may use computer-based reactor protection systems. Lawrence Livermore National Laboratory has evaluated the latest techniques in software reliability for measurement, estimation, error detection, and prediction that can be used during the software life cycle as a means of risk assessment for reactor protection systems. One aspect of this task has been a survey of the software industry to collect information to help identify the design factors used to improve the reliability and safety of software. The intent was to discover what practices really work in industry and what design factors are used by industry to achieve highly reliable software. The results of the survey are documented in this report. Three companies participated in the survey: Computer Sciences Corporation, International Business Machines (Federal Systems Company), and TRW. Discussions were also held with NASA Software Engineering Lab/University of Maryland/CSC, and the AIAA Software Reliability Project

  9. Circulating Metabolic Profile of High Producing Holstein Dairy Cows

    Directory of Open Access Journals (Sweden)

    Aliasghar CHALMEH

    2015-07-01

    Full Text Available Assessing the metabolic profile based on the concept that the laboratory measurement of certain circulating components is a tool to evaluate metabolic status of dairy cows. Veterinarian also can evaluate the energy input-output relationships by assessing the metabolic profile to prevent and control of negative energy balance, metabolic disorders and nutritional insufficiencies. In the present study, 25 multiparous Holstein dairy cows were divided to 5 equal groups containing early, mid and late lactation, and far-off and close-up dry. Blood samples were collected from all cows through jugular venipuncture and sera were evaluated for glucose, insulin, β-hydroxybutyric acid (BHBA, non-esterified fatty acid (NEFA, cholesterol, triglyceride (TG, high, low and very low density lipoproteins (HDL, LDL and VLDL. Insulin levels in mid lactation and close-up dry cows were significantly higher than other groups (P<0.05 and the lowest insulin concentration was detected in far-off dry group. Serum concentrations of NEFA and BHBA in early and mid-lactation and close-up dry cows were significantly higher than late lactation and far-off dry animals (P<0.05. Baseline levels of cholesterol in mid and late lactation were significantly higher than other groups. The level of LDL in mid lactation cows was higher than others significantly, and its value in far-off dry cows was significantly lower than other group (P<0.05. It may be concluded that the detected changes among different groups induce commonly by negative energy balance, lactogenesis and fetal growth in each state. The presented metabolic profile can be considered as a tool to assess the energy balance in dairy cows at different physiologic states. It can be used to evaluate the metabolic situations of herd and manage the metabolic and production disorders.

  10. HIGH ENERGY, HIGH BRIGHTNESS X-RAYS PRODUCED BY COMPTON BACKSCATTERING AT THE LIVERMORE PLEIADES FACILITY

    International Nuclear Information System (INIS)

    Tremaine, A M; Anderson, S G; Betts, S; Crane, J; Gibson, D J; Hartemann, F V; Jacob, J S; Frigola, P; Lim, J; Rosenzweig, J; Travish, G

    2005-01-01

    PLEIADES (Picosecond Laser Electron Interaction for the Dynamic Evaluation of Structures) produces tunable 30-140 keV x-rays with 0.3-5 ps pulse lengths and up to 10 7 photons/pulse by colliding a high brightness electron beam with a high power laser. The electron beam is created by an rf photo-injector system, accelerated by a 120 MeV linac, and focused to 20 (micro)m with novel permanent magnet quadrupoles. To produce Compton back scattered x-rays, the electron bunch is overlapped with a Ti:Sapphire laser that delivers 500 mJ, 100 fs, pulses to the interaction point. K-edge radiography at 115 keV on Uranium has verified the angle correlated energy spectrum inherent in Compton scattering and high-energy tunability of the Livermore source. Current upgrades to the facility will allow laser pumping of targets synchronized to the x-ray source enabling dynamic diffraction and time-resolved studies of high Z materials. Near future plans include extending the radiation energies to >400 keV, allowing for nuclear fluorescence studies of materials

  11. Dangerous enemy in Estonian garden soil

    International Nuclear Information System (INIS)

    Petersell, V.; Mottus, V.; Taeht, K.

    2005-01-01

    Radon is thoroughly discussed in the article. Its generation and the heath risks it can cause. The distribution of radon in the soil is analysed (one soil lithotype at a time (kBq/m)). The measurements received on different surveyed sites are compared to the standards allowed for the construction works. There is also the link between lung cancer cases and radon's radiance and incense/smoking. The North of Estonia is the pearl of Estonia landscape. The sea being near, beautiful seaside views attract people and inspire them to build their houses in this kind of surroundings. However, these areas are natural danger sources, as the percentage of radon concentration in the soil is often high or very high. South Estonia also has a lot of spectacular places with high concentration of radon in the soil [et

  12. The Dominance of Indirect Taxes in Estonian State Budget

    Directory of Open Access Journals (Sweden)

    Olev Raju

    2013-01-01

    Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

  13. High average power, highly brilliant laser-produced plasma source for soft X-ray spectroscopy.

    Science.gov (United States)

    Mantouvalou, Ioanna; Witte, Katharina; Grötzsch, Daniel; Neitzel, Michael; Günther, Sabrina; Baumann, Jonas; Jung, Robert; Stiel, Holger; Kanngiesser, Birgit; Sandner, Wolfgang

    2015-03-01

    In this work, a novel laser-produced plasma source is presented which delivers pulsed broadband soft X-radiation in the range between 100 and 1200 eV. The source was designed in view of long operating hours, high stability, and cost effectiveness. It relies on a rotating and translating metal target and achieves high stability through an on-line monitoring device using a four quadrant extreme ultraviolet diode in a pinhole camera arrangement. The source can be operated with three different laser pulse durations and various target materials and is equipped with two beamlines for simultaneous experiments. Characterization measurements are presented with special emphasis on the source position and emission stability of the source. As a first application, a near edge X-ray absorption fine structure measurement on a thin polyimide foil shows the potential of the source for soft X-ray spectroscopy.

  14. Chemical composition of anthropogenic particles on needles collected close to the Estonian oil-shale power plants

    International Nuclear Information System (INIS)

    Meinander, O.

    1995-01-01

    Within the countries surrounding the Baltic Sea, north-eastern Estonia is among the most polluted areas. Emissions from the oil-shale power plants produce air pollution problems both locally and on a larger scale. In the atmosphere, pollutants mix and convert. Consequently, the particles deposited due to the use of oil-shale can have various chemical compositions. From the point of view of air chemistry, ecological effects and air pollution modelling, knowledge of the chemical composition of the deposited particles can be of great value. The aim of this work was to study the chemical composition of single anthropogenic particles occurring on needle surfaces in north-eastern Estonia and Southern Finland close to the Estonian oil-shale power plants. For the purpose, scanning electron microscopical microanalysis was used

  15. Supervision, mentorship and peer networks: how Estonian early career researchers get (or fail to get support

    Directory of Open Access Journals (Sweden)

    Jaana Eigi

    2018-03-01

    Full Text Available The paper analyses issues related to supervision and support of early career researchers in Estonian academia. We use nine focus groups interviews conducted in 2015 with representatives of social sciences in order to identify early career researchers’ needs with respect to support, frustrations they may experience, and resources they may have for addressing them. Our crucial contribution is the identification of wider support networks of peers and colleagues that may compensate, partially or even fully, for failures of official supervision. On the basis of our analysis we argue that support for early career researchers should take into account the resources they already possess but also recognise the importance of wider academic culture, including funding and employment patterns, and the roles of supervisors and senior researchers in ensuring successful functioning of support networks. Through analysing the conditions for the development of early career researchers – producers of knowledge – our paper contributes to social epistemology understood as analysis of specific forms of social organisation of knowledge production.

  16. Jäätmetega kimpus Estonian Cell annab muda põldudele kompostiks / Ulvar Käärt

    Index Scriptorium Estoniae

    Käärt, Ulvar, 1982-

    2007-01-01

    Kundas asuv Estonian Celli tehas jagab ümberkaudsetele talunikele jäätmetest lahtisaamiseks kompostimissegu. Seadused ei sätesta, kuidas Estonian Cellis tekkivaid jäätmeid töödelda. Kommenteerib Peeter Eek: Aasta läbi ei saa muda põllule viia

  17. The Category of Time in Fairy Tales: Searching for Folk Calendar Time in the Estonian Fairy Tale Corpus

    Directory of Open Access Journals (Sweden)

    Mairi Kaasik

    2011-03-01

    Full Text Available The article examines how folk calendar holidays are represented in Estonian fairy tales. It introduces some views presented in folklore studies about the concept of time in fairy tales and finds parallels with them in the Estonian context. The analysis relies on the digital corpus of Estonian fairy tales (5400 variants, created from the texts found in the Estonian Folklore Archives by the Fairy Tale Project of the Department of Estonian and Comparative Folklore, University of Tartu. Folk calendar holidays occur in Estonian fairy tales relatively seldom; most often these are holidays that occupy a significant place in the Estonian folk calendar (Christmas, St. John’s Day, Easter, St. George’s Day. Calendar holidays are notably mentioned more often in tale types which remain on the borderline between the fairy tale and the legend or the fairy tale and the religious tale. In Estonian fairy tales, calendar holidays are used on three levels of meaning: (1 the holiday is organically associated with the tale type; it has an essential role in the plot of the tale; (2 to a certain extent, the holiday could be replaced by another holiday having an analogous meaning; (3 the holiday forms an unimportant or occasional addition to the tale.

  18. Musical Practices and Methods in Music Lessons: A Comparative Study of Estonian and Finnish General Music Education

    Science.gov (United States)

    Sepp, Anu; Ruokonen, Inkeri; Ruismäki, Heikki

    2015-01-01

    This article reveals the results of a comparative study of Estonian and Finnish general music education. The aim was to find out what music teaching practices and approaches/methods were mostly used, what music education perspectives supported those practices. The data were collected using questionnaires and the results of 107 Estonian and 50…

  19. Comparative study of microbiological, chemical and sensory properties of kefirs produced in Estonia, Latvia and Lithuania.

    Science.gov (United States)

    Anton, Dea; Raudsepp, Piret; Roasto, Mati; Meremäe, Kadrin; Kuusik, Sirje; Toomik, Peeter; Elias, Priit; Laikoja, Katrin; Kaart, Tanel; Lepiku, Martin; Püssa, Tõnu

    2016-02-01

    In the current study the microbiological, sensory and chemical properties of 24 kefirs (12 producers) from Estonian, Latvian and Lithuanian retail market were determined using gas chromatography (GC), high performance liquid chromatography (HPLC-MS/MS-Q-TOF and LC-ion trap MS/MS), spectrophotometry and other methods. Antihypertensive, angiotensin-converting enzyme (ACE) inhibiting, antioxidant and antibacterial peptides were found in the kefir samples. According to the results of principal component analysis of 200 most abundant compounds obtained with HPLC-MS/MS-Q-TOF analysis, Estonian kefirs differed from the rest. Kefirs of Latvian and Lithuanian origin showed similarities in several characteristics, probably related to the starter cultures and technological processes. The fatty acids composition of all Baltic kefirs was uniform. The antioxidant capacity of the kefirs varied slightly, whereas intermediate positive correlation (r = 0.32, P kefirs. Only one third of analysed kefirs met the requirements of the minimum sum of viable microorganisms, indicated in the Codex Standard for Fermented Milks.

  20. Frost related dieback in Estonian energy plantations of willows in relation to fertilisation and pathogenic bacteria

    Energy Technology Data Exchange (ETDEWEB)

    Cambours, M.A.; Nejad, P. [Department of Forest Mycology and Pathology, Swedish University of Agricultural Sciences, Box 7026, 750 07 Uppsala (Sweden); Heinsoo, K. [Institute of Zoology and Botany, Estonian Agricultural University, Riia 181, 51014 Tartu (Estonia); Granhall, U. [Department of Microbiology, Swedish University of Agricultural Sciences, Box 7025, 750 07 Uppsala (Sweden)

    2006-03-15

    Two 9-year old Estonian Salix plantations suffering from dieback were studied: one situated on poor mineral soil and divided into fertilised and unfertilised plots (Saare plantation) and another growing on a well-decomposed and nitrogen-rich organic soil, without fertiliser application (Kambja plantation). Bacteria from internal tissues of visually damaged shoots from seven clones were isolated in spring and autumn. The strains were subsequently biochemically characterised and tested for ice nucleation activity and pathogenicity on Salix. Some strains were also analysed with 16S rRNA. High numbers of culturable bacteria were found, belonging mainly to Erwinia, Sphingomonas, Pseudomonas and Xanthomonas spp. Fertilised plots were significantly more colonised by bacteria than unfertilised plots and also more extensively damaged, showing a lower density of living plants after 7 years of culture. More ice nucleation active (INA) strains were found in Saare fertilised plots and at Kambja than in Saare unfertilised plots. Likewise, most pathogenic strains were isolated from Saare fertilised plots and from Kambja. For some of the willow clones studied, dieback appeared to be related to both clonal frost sensitivity and abundance of INA and pathogenic bacteria. The plantations probably suffered from the presence of high amounts of pathogens and from frost related injuries aggravated by INA bacteria. Most probably the fertilisation at Saare and the nitrogen-rich soil at Kambja created a favourable environment for bacterial development and led to high dieback levels after the first harvest. (author)

  1. On the System of Place Name Signs in Estonian Sign Language

    Directory of Open Access Journals (Sweden)

    Liina Paales

    2011-05-01

    Full Text Available A place name sign is a linguistic-cultural marker that includes both memory and landscape. The author regards toponymic signs in Estonian Sign Language as representations of images held by the Estonian Deaf community: they reflect the geographical place, the period, the relationships of the Deaf community with hearing community, and the common and distinguishing features of the two cultures perceived by community's members. Name signs represent an element of signlore, which includes various types of creative linguistic play. There are stories hidden behind the place name signs that reveal the etymological origin of place name signs and reflect the community's memory. The purpose of this article is twofold. Firstly, it aims to introduce Estonian place name signs as Deaf signlore forms, analyse their structure and specify the main formation methods. Secondly, it interprets place-denoting signs in the light of understanding the foundations of Estonian Sign Language, Estonian Deaf education and education history, the traditions of local Deaf communities, and also of the cultural and local traditions of the dominant hearing communities. Both perspectives - linguistic and folkloristic - are represented in the current article.

  2. Radon in Estonian dwellings - Results from a National Radon Survey

    Energy Technology Data Exchange (ETDEWEB)

    Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo [Estonian Radiation Protection Centre (Kiirguskeskus), Tallinn (Spain); Aakerblom, Gustav [Swedish Radiation Protection Authority, Stockholm (Sweden)

    2003-10-01

    A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m{sup 3}, in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m{sup 3}. In 1% of the dwellings the radon concentration exceeded 400 Bq/m{sup 3}. The highest radon concentration found in the study was 1040 Bq/m{sup 3}. Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m{sup 3}, and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m{sup 3}. The mean value for all Estonia dwellings is calculated

  3. Radon in Estonian dwellings - Results from a National Radon Survey

    International Nuclear Information System (INIS)

    Pahapill, Lia; Rulkov, Anne; Rajamaee, Raivo; Aakerblom, Gustav

    2003-10-01

    A countrywide survey of radon concentrations in Estonian dwellings was carried out during the period 1998-2001. The survey formed a part of the cooperation program on radiation protection between the Estonian Radiation Protection (Kiirguskeskus) Centre and the Swedish Radiation Protection Authority (SSI). The survey included measurements in a number of dwellings representative for Estonia in detached houses and multifamily buildings (only dwellings on the bottom floor were included in the survey). Altogether, radon concentrations were measured in 515 dwellings, a number large enough to be statistically significant. All measurements were made with alphatrack film detectors of the same type that SSI uses in Sweden. The measurements were made during a 2-3 month period during the winter half-year. Two detectors were used in each dwelling. In Estonia there are 0.17 million dwellings in detached houses and 0.45 million in multi apartment buildings. Of the 1.26 million inhabitants in Estonia. 0.36 million live in detached houses and 0.90 million in multi apartment buildings. Most of the latter were built during the Soviet occupation. Of the dwellings in multifamily buildings 30 % are assumed to be situated on the first floor. The mean radon concentration in dwellings in detached hoses, according to the survey results, is 103 Bq/m 3 , in dwellings on the bottom floor in multi apartment buildings it is 78 Bq/m 3 . In 1% of the dwellings the radon concentration exceeded 400 Bq/m 3 . The highest radon concentration found in the study was 1040 Bq/m 3 . Based on the assumption that the average radon concentration in the dwellings in multi-apartment buildings that are not situated on the bottom floor is 30 Bq/m 3 , and that these dwellings constitute 70% of all dwellings in multi apartment buildings, the mean radon concentration in dwellings in multi apartment buildings is calculated to be 44 Bq/m 3 . The mean value for all Estonia dwellings is calculated to be 60 Bq/m 3 . Using

  4. Vitality of the Estonian forests (results of the inventory and research)

    International Nuclear Information System (INIS)

    Karoles, K.

    1991-01-01

    Factors affecting Estonian forests are: The environmental, specially atmospheric pollution, - the foundation of new forests as monoculture on unsuitable locations, - mechanical damages by unsuitable forest machinery, - unfavourable water conditions, - Heterobasidion or Armillaria rot roots. Local damages in consequence of air pollutants are distributed in environments of Tallinn, Kivioli, Kohtla-Jaerve and the thermal power stations (Narva), where the SO 2 -content in the air is on the average higher than 50 (80) μg/m 3 . Pine forests on dry sand soils (600 ha damaged in 1989) and the older spruce forests show the new type of forest decline. High Al-ion concentration, disturbances of the Ca-Mg-metabolism, an extreme nutrient deficit, (specially N-deficit) and periodical water deficit as well as pathogenic fungi are damaging the trees. Spruces show nonspecific defoliation, needle necrosis, needlefall, occurence of fungal diseases. More damaged are the spruce forests in regions with basic precipitations and high sulphur-deposition. (orig./UWA) [de

  5. The Problems of Estonian R&D and Innovation Strategy and the Demand-Side Innovation Policies

    Directory of Open Access Journals (Sweden)

    Tõnu Roolaht

    2012-12-01

    Full Text Available The second larger Estonian R&D and Innovation Strategy ‘Knowledge-based Estonia 2007-2013’ is aimed at continuing the advancement of research and development efforts towards an innovative knowledge-based society and economic system in Estonia. Fostering of knowledge-based high-tech industries is seen as paramount for retaining country’s competitive advantage. However, the mid-term evaluations indicate that several goals of the strategy might not be achievable by 2013. In fact, the policy measures have been much more successful in developing scientific research, as indicated by increased international publication, number of patents, and number of researchers and engineers. The advances in development of high-tech products and services through innovations are noticeable but less prominent. The purpose of this study is to suggest the role for demand-side innovation policies in helping to advance commercial development and innovation

  6. Compiling the Dictionary of Word Associations in Estonian: From scratch to the database

    Directory of Open Access Journals (Sweden)

    Ene Vainik

    2018-04-01

    Full Text Available The present paper describes the project titled “The Dictionary of Word Associations in Estonian” undertaken by the author at the Institute of the Estonian Language. The general aim of the Dictionary is to provide insights into Estonians’ common-sense mind. It is meant to be a tool of self-reflection for Estonian native speakers and a guide for the foreigners who are eager enough to make themselves familiar with the Estonian cultural patterns of thought. The Dictionary will be published online. The number of keywords was initially limited to approximately 800. Specific emphasis is given to the stage of data collection by implementing the principles of citizen science.

  7. The Woman as Wolf (AT 409: Some Interpretations of a Very Estonian Folk Tale

    Directory of Open Access Journals (Sweden)

    Merili Metsvahi

    2013-12-01

    Full Text Available The article analyses tale type The Woman as Wolf, which is one of the most popular folk tales in the Estonian Folklore Archives and is represented there both in the form of a fairy tale and in the form of a legend. The vast majority of the versions of The Woman as Wolf were written down in the first part of the 20th century within Estonia and where recorded from Estonians. The article introduces the content of the tale, the origin of the first records from the early 19th century, and the dissemination area of the tale, which remains outside Western Europe: apart from the Estonian versions there are Sami, Karelian, Vepsian, Livonian, Latvian, Lithuanian, Russian, Ukrainian and Belarusian versions. While in almost all the Estonian versions the main protagonist is transformed into a wolf, in most of the versions written down in other areas and ethnic groups, another animal or bird replaces the wolf. The author is of the opinion that the Finnic area is central to the distribution of the folk tale The Woman as Wolf. The animal the woman is transformed into in the plot would not have been a wolf in earlier times. The article provides an explanation why the wolf is predominant in Estonian written sources. For that purpose the ways in which the wolf and werewolf were perceived in earlier Estonian folk belief are introduced. At the end of the article interpretation of the folk tale is provided. The author states that the plot and some of the motifs found in this folk tale reflect the difficulties women had in submitting to the norms and values of patriarchal order within their society.

  8. Estonian energy system: Proposals for the implementation of a cogeneration strategy

    International Nuclear Information System (INIS)

    Lund, H.; Hvelplund, F.; Ingermann, K.; Kask, U.

    2000-01-01

    Since the Soviet era Estonia inherited oil-shale-based electricity plants, with a capacity of 3000 MW. Oil shale now provides Estonia with very low electricity prices. However, most of the stations are very old. Half of them were built before 1965, and sooner or later the old oil shale production units will have to be replaced. Estonia will then have to face serious increases in electricity production prices. At the same time Estonia has problems in restoring its district heating systems. The prices are rising and may consumers have converted to other heating sources such as electric heating. The major long-term strategic policy choices to make in Estonia are to decide (1) whether the oil shale power stations should be replaced by new centralized production units such as new oil shale stations or nuclear power, or (2) whether the electricity production should be decentralized. In the centralized solution (oil shale or nuclear power), the domestic heating will be left to boilers or electric heating leading to a very high primary energy supply. In the decentralized solution, Estonia could benefit from the advantage of cogeneration leading to very low fuel consumption. But this latter strategy depends on the restoration of the district heating systems. This article seeks to form a strategy to improve the efficiency of the Estonian energy system by increasing the use of cogeneration. (author)

  9. The figure of the teacher in Estonian school discourse

    Directory of Open Access Journals (Sweden)

    Ott Puumeister

    2014-10-01

    Full Text Available The article concerns itself with the figure of the teacher in Estonian society. We do not concentrate on the educational system as a whole, but on one specific and crucial element in this apparatus - the teacher. We begin by offering a brief historical overview of the conditions of pedagogues in the 20th century before moving on to describe the adoption of neo-liberal free market policies since the 1990s and the effects these policies had and still have on education. Our main concern is to understand the teacher as an actor in power relations; to achieve this understanding we have selected as our examples 1 surveillance techniques in school environment that have direct relations to the state and the market; and 2 the 2012 educational workers' strike that made it quite clear that the teachers have been fixed to a position of wage workers. The overall and more abstract aim of the paper is to think about the social role of the teacher in Estonia.

  10. MODELLING DICLOFENAC AND IBUPROFEN RESIDUES IN MAJOR ESTONIAN SEASIDE CITIES

    Directory of Open Access Journals (Sweden)

    Erki Lember

    2016-06-01

    Full Text Available A theoretical model was developed to model the fate of two common pharmaceutical residues: diclofenac and ibuprofen in eight Estonian seaside cities that discharge their wastewaters directly into the Baltic Sea. The consumption rates of the active ingredients of diclofenac and ibuprofen from 2006-2014 were analysed. A decrease of 19.9% for diclofenac consumption and an increase of 14.1% for ibuprofen were found. The fate of diclofenac and ibuprofen were modelled by considering the human metabolism removal rate for pharmaceuticals, the removal rate of diclofenac and ibuprofen in activated sludge wastewater treatment plants (WWTP and annual flow rates. An average decrease from 1 to 0.8 µg/l (decrease of 20% for diclofenac and an increase from 11.4 to 13.4 µg/l (increase of 14.9% for ibuprofen for the concentration in the effluents of the WWTP were modelled. The model gives us a good overview about the theoretical concentrations of pharmaceutical residues in the environment and is helpful for evaluating environmental impacts.

  11. History of experimental psychology from an Estonian perspective.

    Science.gov (United States)

    Allik, Jüri

    2007-11-01

    A short review of the development of experimental psychology from an Estonian perspective is presented. The first rector after the reopening of the University of Dorpat (Tartu) in 1802, Georg Friedrich Parrot (1767-1852) was interested in optical phenomena which he attempted to explain by introducing the concept of unconscious inferences, anticipating a similar theory proposed by Herman von Helmholtz 20 years later. One of the next rectors, Alfred Wilhelm Volkmann (1800-1878) was regarded by Edwin Boring as one of the founding fathers of the experimental psychology. Georg Wilhelm Struve (1793-1864) played an essential part in solving the problem of personal equations. Arthur Joachim von Oettingen (1836-1920) developed a theory of music harmony, which stimulated his student Wilhelm Friedrich Ostwald (1853-1932) to study colour harmony. Emil Kraepelin (1856-1926), the founder of modern psychiatry, is by far the most important experimental psychologist who has worked in Estonia. His successor Wladimir von Tchisch (1855-1922), another student of Wilhelm Wundt, continued Kraepelin's work in experimental psychology. The lives of Wolfgang Köhler (1887-1967), who was born in Reval (Tallinn), and Oswald Külpe (1862-1915), who graduated from the University of Dorpat, extended the link between the history of experimental psychology and Estonia. Karl Gustav Girgensohn (1875-1925), the founder of the Dorpat School of the psychology of religion, stretched the use of experimental methods to the study of religious experience.

  12. Estonian Perceptions of Security: Not Only About Russia and the Refugees

    Directory of Open Access Journals (Sweden)

    Veebel Viljar

    2016-12-01

    Full Text Available The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016 will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks Report 2016. Also, the arguments why some topics have played or are currently playing key role in the Estonian security perception will be presented and discussed.

  13. Field trial on progesterone cycles, metabolic profiles, body condition score and their relation to fertility in Estonian Holstein dairy cows.

    Science.gov (United States)

    Samarütel, J; Ling, K; Waldmann, A; Jaakson, H; Kaart, T; Leesmäe, A

    2008-08-01

    Resumption of luteal activity postpartum and fertility were investigated in an Estonian Holstein high milk production and good fertility dairy herd. Body condition was scored after every 10 days in 54 multiparous dairy cows (71 lactations) calving inside from December to March during 4-year period. Blood samples were taken 1-14 days before calving and 1-14, 28-42 and 63-77 days after calving: analytes estimated were serum aspartate aminotransferase (AST), glucose, ketone bodies, total cholesterol, non-esterified fatty acids and triglycerides. The general linear mixed model was used to compare the data for cows with different characteristics in luteal activity postpartum based on their milk progesterone profiles. Forty-five per cent of cases had abnormal profiles; delayed resumption of ovarian cyclicity postpartum (DC) was the most prevalent abnormality. There was no difference in body condition scores between the groups. The DC and prolonged luteal phase groups had higher serum AST activity (p fertility.

  14. Desalination and reuse of high-salinity shale gas produced water: drivers, technologies, and future directions.

    Science.gov (United States)

    Shaffer, Devin L; Arias Chavez, Laura H; Ben-Sasson, Moshe; Romero-Vargas Castrillón, Santiago; Yip, Ngai Yin; Elimelech, Menachem

    2013-09-03

    In the rapidly developing shale gas industry, managing produced water is a major challenge for maintaining the profitability of shale gas extraction while protecting public health and the environment. We review the current state of practice for produced water management across the United States and discuss the interrelated regulatory, infrastructure, and economic drivers for produced water reuse. Within this framework, we examine the Marcellus shale play, a region in the eastern United States where produced water is currently reused without desalination. In the Marcellus region, and in other shale plays worldwide with similar constraints, contraction of current reuse opportunities within the shale gas industry and growing restrictions on produced water disposal will provide strong incentives for produced water desalination for reuse outside the industry. The most challenging scenarios for the selection of desalination for reuse over other management strategies will be those involving high-salinity produced water, which must be desalinated with thermal separation processes. We explore desalination technologies for treatment of high-salinity shale gas produced water, and we critically review mechanical vapor compression (MVC), membrane distillation (MD), and forward osmosis (FO) as the technologies best suited for desalination of high-salinity produced water for reuse outside the shale gas industry. The advantages and challenges of applying MVC, MD, and FO technologies to produced water desalination are discussed, and directions for future research and development are identified. We find that desalination for reuse of produced water is technically feasible and can be economically relevant. However, because produced water management is primarily an economic decision, expanding desalination for reuse is dependent on process and material improvements to reduce capital and operating costs.

  15. Individual and work-related risk factors for musculoskeletal pain: a cross-sectional study among Estonian computer users.

    Science.gov (United States)

    Oha, Kristel; Animägi, Liina; Pääsuke, Mati; Coggon, David; Merisalu, Eda

    2014-05-28

    Occupational use of computers has increased rapidly over recent decades, and has been linked with various musculoskeletal disorders, which are now the most commonly diagnosed occupational diseases in Estonia. The aim of this study was to assess the prevalence of musculoskeletal pain (MSP) by anatomical region during the past 12 months and to investigate its association with personal characteristics and work-related risk factors among Estonian office workers using computers. In a cross-sectional survey, the questionnaires were sent to the 415 computer users. Data were collected by self-administered questionnaire from 202 computer users at two universities in Estonia. The questionnaire asked about MSP at different anatomical sites, and potential individual and work related risk factors. Associations with risk factors were assessed by logistic regression. Most respondents (77%) reported MSP in at least one anatomical region during the past 12 months. Most prevalent was pain in the neck (51%), followed by low back pain (42%), wrist/hand pain (35%) and shoulder pain (30%). Older age, right-handedness, not currently smoking, emotional exhaustion, belief that musculoskeletal problems are commonly caused by work, and low job security were the statistically significant risk factors for MSP in different anatomical sites. A high prevalence of MSP in the neck, low back, wrist/arm and shoulder was observed among Estonian computer users. Psychosocial risk factors were broadly consistent with those reported from elsewhere. While computer users should be aware of ergonomic techniques that can make their work easier and more comfortable, presenting computer use as a serious health hazard may modify health beliefs in a way that is unhelpful.

  16. The problems and development potential of revenue autonomy in Estonian municipalities. Kohalike omavalitsuste tuluautonoomia probleemid ja arenguvõimalused Eestis

    Directory of Open Access Journals (Sweden)

    Janno Reiljan

    2013-01-01

    Full Text Available In a regionally heterogeneous country like Estonia, it is a difficult task to create a local government revenue structure that guarantees even supply of public services across the entire country and, at the same time, revenue autonomy for the municipalities. In the theoretical part of the current article the suitability of different sources of own revenues are analysed in the context of Estonian municipalities. The empirical part of the article compares the financing principles of Estonian municipalities with other EU countries. Finally, the proportions of different own sources of revenues in the budgets of Estonian local governments are examined and suggestions are made for changing the current system

  17. Iseseisvusdeklaratsioonid 1776–1918. The Estonian Declaration of Sovereignty: An Example of the Civilizing Force of Hypocrisy

    Directory of Open Access Journals (Sweden)

    Hent Kalmo

    2012-06-01

    proposed amendments to the Soviet Constitution (that would have curbed the rights of the Union Republics by adopting a Declaration of Sovereignty, which effectively made the application of Soviet legal acts optional in the terrirory of the Estonian SSR. The Soviet leadership reacted in a confused manner, as it first responded positively to the Declaration, then condemned it as illegal, but also admitted that it was an expression of legitimate concerns. The fact that the notion of sovereignty was an important part of the orthodox Soviet constitutional doctrine, and the apprehension that the Estonian interpretative position might diffuse into other Union Republics, induced the Politburo to orchestrate a highly publicised denunciation of the Declaration. But this had the paradoxical effect of casting the Declaration as something that could be discussed, i.e. as something that deserved an argued rebuttal. In a way, the Politburo thus contributed to making the Estonian Declaration into a model that was later copied by almost all the Union Republics as they started either to head towards independence or jockey for a better position in the negotiations over the new Union Treaty, drafted in haste by the part of the Soviet leadership that was willing to opt for a confederate solution. The debate over the nature of Soviet federalism and its political aftermath illustrates the fact that a constitution which lies dormant under an authoritarian regime as a document of cynical hypocrisy has the potential to become a focal point for the formulation of political demands when circumstances change. The options open to the Soviet leadership in responding to the steps taken by the Baltic independence movements were clearly influenced, at least to some extent, by the vocabulary it was able to draw on to justify its response, especially since it had recently vowed to take the Soviet Constitution seriously in the future. Under propitious circumstances, its own hypocrisy could indeed exert a

  18. Unexplored Brazilian oceanic island host high salt tolerant biosurfactant-producing bacterial strains.

    Science.gov (United States)

    da Silva, Fábio Sérgio Paulino; Pylro, Victor Satler; Fernandes, Pericles Leonardo; Barcelos, Gisele Souza; Kalks, Karlos Henrique Martins; Schaefer, Carlos Ernesto Gonçalves Reynaud; Tótola, Marcos Rogério

    2015-05-01

    We aimed to isolate biosurfactant-producing bacteria in high salt conditions from uncontaminated soils on the Brazilian oceanic island, Trindade. Blood agar medium was used for the isolation of presumptive biosurfactant-producing bacteria. Confirmation and measurements of biosurfactant production were made using an oil-spreading method. The isolates were identified by fatty acid profiles and partial 16S rRNA gene sequence analysis. A total of 14 isolates obtained from the 12 soil samples were found to produce biosurfactants. Among them, two isolates stood out as being able to produce biosurfactant that is increasingly active in solutions containing up to 175 g L(-1) NaCl. These high salt tolerant biosurfactant producers are affiliated to different species of the genus Bacillus. Soil organic matter showed positive correlation with the number of biosurfactant-producing bacteria isolated from our different sampling sites. The applied approach successfully recovered and identified biosurfactant-producing bacteria from non-contaminated soils. Due to the elevated salt tolerance, as well as their capacity to produce biosurfactants, these isolates are promising for environmental biotechnological applications, especially in the oil production chain.

  19. Tiger in Focus--A National Survey of ICT in Estonian Schools

    Science.gov (United States)

    Toots, Anu; Laanpere, Mart

    2004-01-01

    Estonia has not participated in international studies of ICT in education, nor have there been any similar studies at the national level up until the year 2000. The first survey of ICT in Estonian schools was conducted after completion of the national school computerization programme called Tiger Leap. This paper focuses on the targeted responses…

  20. Alberta's Estonians 1899 - Present TLÜ Akadeemilises Raamatukogus / Sander Jürisson

    Index Scriptorium Estoniae

    Jürisson, Sander

    2014-01-01

    Tallinna Ülikooli Akadeemilises Raamatukogus on üleval näitus "Alberta's Estonians 1899 - Present", mis annab ülevaate Kanada Alberta provintsi eestlaste loost. Näitus valmis Alberta Eesti Kultuuripärandi Seltsi koostöös Alberta Provintsi Arhiivi Kultuuripärandi Osakonnaga Edmontonis

  1. Consumer Socialisation and Value Orientations among Estonian and Chinese Young People

    Science.gov (United States)

    Waerdahl, Randi; Kalmus, Veronika; Keller, Margit

    2011-01-01

    This paper asks if Estonian and Chinese tweens' access to pocket money influences their brand valuation, as well as value orientations in the context of perceived peer popularity and personal well-being. Surveys conducted in autumns 2006 (China n = 188) and 2007 (Estonia n = 111) show an inherent cultural resistance among tweens in both countries…

  2. The Perceived Impact of External Evaluation: The System, Organisation and Individual Levels-Estonian Case

    Science.gov (United States)

    Seema, Riin; Udam, Maiki; Mattisen, Heli; Lauri, Liia

    2017-01-01

    The purpose of this article is to provide an overview of how the employees of higher education institutions perceive the impact of external evaluations. The study was conducted using the concurrent mixed method and involved 361 employees from Estonian universities and professional higher education institutions. The results indicated that…

  3. Estonian Airi ümber käib lehmakauplemine / Tõnu Lilleorg

    Index Scriptorium Estoniae

    Lilleorg, Tõnu

    2008-01-01

    Skandinaavia lennukompanii SAS saatis Eesti valitsusele kirja, milles teatab, et on nõus raskustes Estonian Airile lisainvesteeringuid tegema vaid siis, kui riik müüb SAS-ile oma osaluse, 34%. Vt. samas: SAS ei taha lennufirma eest maksta üle 150 miljoni. Diagramm: Majandusnäitajad, omanikud

  4. Estonian Cell peab suu kasumist puhtaks pühkima / Kaisa Tahlfeld, Katre Pilvinski

    Index Scriptorium Estoniae

    Tahlfeld, Kaisa

    2008-01-01

    Estonian Cell saatis valitsusele pöördumise, milles palutakse teha parandusi elektrienergiaga seonduvates seadustes, mis aitaksid ettevõtet energia hinnatõusu ajal. Elektri hinnatõusu tõttu on muutunud küsitavaks ka Nitroferti tehase edasine eksisteerimine

  5. Sustainable development outlooks of the Estonian energy sector for convergence with the European Union countries

    International Nuclear Information System (INIS)

    Laur, Anton; Tenno, Koidu; Soosaar, Sulev

    2002-01-01

    The article presents an overview of a research conducted in the Estonian Inst. of Economics and the Estonian Energy Research Inst. with the objectives to: analyse the dynamics of the main Estonian energy use indicators over the last 8-10 years with the background of general macroeconomics developments; compare these indicators with the respective energy indicators in the European Union Member States and Candidate Countries; evaluate Estonia's potential to catch up by the energy use efficiency (GDP energy intensity) of the average level of EU countries, modelling our possible development scenarios of GDP and TPES. The research results indicates several positive development tendencies (e.g. reduction of TPES and CO 2 emissions with the background of economic growth) in the Estonian energy sector, as well as convergence with the EU countries in terms of GDP energy intensity. Unfortunately, the model analysis results demonstrate that it takes a lot of time for Estonia to reach the current EU level - even under the most favourable GDP and TPES development conditions, 25-30 years. The primary reason is the very low level of our GDP per capita compared to the EU countries. (author)

  6. Estonian Vocational Teachers' Attitudes towards Inclusive Education for Students with Special Educational Needs

    Science.gov (United States)

    Rose, Richard; Kaikkonen, Leena; Koiv, Kristi

    2007-01-01

    This paper presents the findings from research conducted with two samples of teachers from Estonian Vocational Schools. The first sample comprised a group of teachers who had received professional development directly related to the management of students with special educational needs in vocational education settings. Their attitudes and…

  7. Russian-Estonian Economic and Investment Cooperation During the Crisis: Dynamics and Possibilities

    Directory of Open Access Journals (Sweden)

    Nevskaya Anastasia

    2015-06-01

    Full Text Available The article deals with the development in Russian-Estonian relations during the crises of 2007 and 2014, taking into consideration the balance between political and economic factors in the decision-making by Estonian government. A number of special aspects, trends and problems in trade and investment ties are detected. The aim of the study is to uncover key motivation behind the actions of both Russia and Estonia, to identify the drivers for economic and political development in the region, and to work out recommendations to adjust them. The questions put forward by the authors of this article could not be more topical at the time, when Russian economic situation is obviously getting worse and capital flight (to the neighboring EU Member States is likely to increase. The method of the study is comparative analysis of the impact on economic ties made by Russian-Estonian crisis of 2007 and the current international tension around Ukraine. The regional fossil fuel market and the possibilities of Gazprom involvement in its development are also analyzed. It is concluded that political motives are still important for Estonian decisionmaking, though they are balanced out by measures of business support (despite some of these measures being taken by the EU bodies. The role of political factor for the Russian side is increasing. It is acknowledged that there is a growing number of missed economic opportunities in the Russian Northwest.

  8. The Estonian diaspora in South-West Russia in the 1920—30s: migration results

    Directory of Open Access Journals (Sweden)

    Stupin Yuri

    2010-11-01

    Full Text Available This article analyses the spatial features of the settling of Russian Estonians in the Northwest region at the “zenith” of diaspora on the basis of 1920, 1926, and 1939 censuses. The author identifies the principal settling areas and points out the geographical preconditions for the rapid decline of the diaspora.

  9. Gender Advantages and Gender Normality in the Views of Estonian Secondary School Students

    Science.gov (United States)

    Kuurme, Tiiu; Kasemaa, Gertrud

    2015-01-01

    The aim of the study on Estonian secondary school students was to obtain an overview of the gender-related views and experiences of the everyday school life by students, and to analyse the school-related factors in the development of gender roles and gender-related expectations. We view gender equality as a central condition for social…

  10. Charge-exchange-induced formation of hollow atoms in high-intensity laser-produced plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Rosmej, F.B. [TU-Darmstadt, Institut fuer Kernphysik, Darmstadt (Germany); Faenov, A.Ya.; Pikuz, T.A.; Magunov, A.I.; Skobelev, I.Yu. [Multicharged Ions Spectra Data Center of VNIIFTRI, Mendeleevo (Russian Federation); Auguste, T.; D' Oliveira, P.; Hulin, S.; Monot, P. [Commissariat a lEnergie Atomique DSM/DRECAM/SPAM, Gif-Sur-Yvette Cedex (France); Andreev, N.E.; Chegotov, M.V.; Veisman, M.E. [High Energy Density Research Centre, Institute of High Temperatures of Russian Academy of Sciences, Moscow (Russian Federation)

    1999-03-14

    For the first time registration of high-resolution soft x-ray emission and atomic data calculations of hollow-atom dielectronic satellite spectra of highly charged nitrogen have been performed. Double-electron charge-exchange processes from excited states are proposed for the formation of autoionizing levels nln'l' in high-intensity laser-produced plasmas, when field-ionized ions penetrate into the residual gas. Good agreement is found between theory and experiment. Plasma spectroscopy with hollow ions is proposed and a temperature diagnostic for laser-produced plasmas in the long-lasting recombining regime is developed. (author). Letter-to-the-editor.

  11. Intracellular product recycling in high succinic acid producing yeast at low pH

    NARCIS (Netherlands)

    Wahl, S.A.; Bernal Martinez, C.; Zhao, Zheng; van Gulik, W.M.; Jansen, Mickel L.A.

    2017-01-01

    Background: The metabolic engineering of Saccharomyces cerevisiae for the production of succinic acid has progressed dramatically, and a series of high-producing hosts are available. At low cultivation pH and high titers, the product transport can become bidirectional, i.e. the acid is reentering

  12. Estonian Business Schooli magistriharidus nüüd ka koju kätte / Madis Habakuk

    Index Scriptorium Estoniae

    Habakuk, Madis

    2007-01-01

    Sügisest hakkab Estonian Business School koos Mainori Kõrgkooliga pakkuma magistriõpet majandushariduseta inimestele, kus soovijatel on võimalus õppida EBSi Master of Business Administration programmi järgi

  13. [Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918] / Tõnu Tannberg

    Index Scriptorium Estoniae

    Tannberg, Tõnu, 1961-

    2013-01-01

    Arvustus: Encapsulated voices : Estonian sound recordings from the German prisoner-of-war camps in 1916-1918 (Das Baltikum in Geschichte und Gegenwart, 5). Hrsg. von Jaan Ross. Böhlau Verlag. Köln, Weimar und Wien 2012

  14. Väärikas Estonian Air jäi kampaaniaga hätta / Alyona Stadnik

    Index Scriptorium Estoniae

    Stadnik, Alyona

    2010-01-01

    Estonian Air müüs veebikaupluse cherry.ee kaudu soodsaid kinkekaarte. Vastuolu tekkis asjaolust, et nõudlus kinkekaartide järele oli suurem kui pakkumine. Lennukompanii katkestas soodsate kinkekaartide müügi

  15. The Rocky Road towards Professional Autonomy: The Estonian Journalists’ Organization in the Political Turmoil of the 20th Century

    Directory of Open Access Journals (Sweden)

    Epp Lauk

    2017-09-01

    Full Text Available This article attempts to explain the relationships between journalists, politics and the state from the perspective of collective autonomy, that of the professional organization of journalists. The case of Estonian Journalists’ Union demonstrates the complexity and historical contingency of professional autonomy of journalism. The development of the Estonian journalists’ organization occurred as a sequence of transformations from the Estonian Journalists’ Association to the Estonian Journalists’ Union to the Soviet type journalists’ union, and lastly to an independent trade union. This sequence was disrupted by several fatal breakdowns that changed not only the character of the association, but also professional values, the whole occupational ideology and the conditions of the existence of journalism as a profession in Estonia.

  16. Calculation of high-pressure argon plasma parameters produced by excimer laser

    International Nuclear Information System (INIS)

    Tsuda, Norio; Yamada, Jun

    2000-01-01

    When a XeCl excimer laser light was focused in a high-pressure argon gas up to 150 atm, a dense plasma developed not only backward but also forward. It is important to study on the electron density and temperature of the laser-induced plasma in the high-pressure gas. The electron density and temperature in high-pressure argon plasma produced by XeCl excimer laser has been calculated and compared with the experimental data. (author)

  17. Use of alternative waste materials in producing ultra-high performance concrete

    Directory of Open Access Journals (Sweden)

    Ahmad Shamsad

    2017-01-01

    Full Text Available In a corrosive environment similar to that of the Arabian Gulf, use of high-performance concrete is one of the options to ensure a target service life of concrete structures. However, in absence of good quality coarse aggregates, it is a challenging task to produce high-performance concrete. Recently, the possibility of producing ultra-high-performance concrete (UHPC has been widely reported in the literature. UHPC is produced without coarse aggregates at very low water to cementitious materials ratio, high amounts of cement, mineral admixtures, and superplasticizer along with fine quartz sand as aggregate, quartz powder as micro-filler, a nd steel fibres for fracture toughness. In the present work, an effort was made to utilize local waste materials as alternative mineral admixtures and local dune sand as aggregate in producing different UHPC mixtures without addition of quartz powder. The mechanical properties, shrinkage, and durability characteristics of the UHPC mixtures were studied. Test results indicate that it is possible to produce UHPC mixtures using alternative waste materials, which would have targeted flow, strength, toughness, and resistance against reinforcement corrosion. The information presented in the paper would help in optimum selection of a mixture of UHPC considering the availability of local materials, exposure conditions and structural requirements.

  18. High strength-high conductivity Cu-Fe composites produced by powder compaction/mechanical reduction

    Science.gov (United States)

    Verhoeven, J.D.; Spitzig, W.A.; Gibson, E.D.; Anderson, I.E.

    1991-08-27

    A particulate mixture of Cu and Fe is compacted and mechanically reduced to form an ''in-situ'' Cu-Fe composite having high strength and high conductivity. Compaction and mechanical reduction of the particulate mixture are carried out at a temperature and time at temperature selected to avoid dissolution of Fe into the Cu matrix particulates to a harmful extent that substantially degrades the conductivity of the Cu-Fe composite. 5 figures.

  19. High strength-high conductivity Cu--Fe composites produced by powder compaction/mechanical reduction

    Science.gov (United States)

    Verhoeven, John D.; Spitzig, William A.; Gibson, Edwin D.; Anderson, Iver E.

    1991-08-27

    A particulate mixture of Cu and Fe is compacted and mechanically reduced to form an "in-situ" Cu-Fe composite having high strength and high conductivity. Compaction and mechanical reduction of the particulate mixture are carried out at a temperature and time at temperature selected to avoid dissolution of Fe into the Cu matrix particulates to a harmful extent that substantially degrades the conductivity of the Cu-Fe composite.

  20. The Estonian study of Chernobyl cleanup workers: I. Design and questionnaire data

    International Nuclear Information System (INIS)

    Tekkel, M.; Rahu, M.; Veidebaum, T.

    1997-01-01

    Nearly 2% of the male population of Estonia aged 20-39 years were sent to Chernobyl to assist in the cleanup activities after the reactor accident. A cohort of 4,833 cleanup workers was assembled based on multiple and independent sources of information. Information obtained from 3,704 responses to a detailed questionnaire indicated that 63% of the workers were sent to Chernobyl in 1986; 54% were of Estonian and 35% of Russian ethnicity; 72% were married, and 1,164 of their 5,392 children were conceived after the Chernobyl disaster. The workers were less educated than their counterparts than their counterparts in the general population of Estonia, and only 8.5% had attended university. Based on doses entered in workers records, the mean dose was 11 cGy, with only 1.4% over 25 cGy. Nearly 85% of the workers were sent as part of military training activities, and more than half spent in excess of 3 months in the Chernobyl area. Thirty-six percent of the workers reported having worked within the immediate vicinity of the accident site; 11.5% worked on the roofs near the damaged reactor, clearing the highly radioactive debris. The most commonly performed task was the removal and burial of topsoil (55% of the workers). Potassium iodide was given to over 18% of the men. The study design also incorporates biological indicators of exposure based on the glycophorin A mutational assay of red blood cells and chromosome translocation analyses of lymphocytes; record linkage with national cancer registry and mortality registry files to determine cancer incidence and cause-specific mortality; thyroid screening examinations with ultrasound and fine-needle biopsy; and cryopreserved white blood cells and plasma for future molecular studies. Comprehensive studies of Chernobyl cleanup workers have potential to provide a new information about cancer risks due to protracted exposures to ionizing radiation. 21 refs., 1 fig., 11 tabs

  1. Chemistry of the Estonian oil-shale kukersite

    Energy Technology Data Exchange (ETDEWEB)

    Kogerman, P N

    1931-01-01

    Estonian oil shale is one of the oldest and richest oil shales in the world. The deposits occur in the Middle-Ordovician strata having a total thickness of 2.2 meters. The ultimate composition of the kerogen varied within the following limits: carbon 76.5 to 76.7 percent, hydrogen 9.1 to 9.2 percent, nitrogen 0.2 to 0.4 percent, sulfur 1.6 to 2.2 percent, chlorine 0.5 to 0.7 percent, and oxygen (by difference) 11.2 to 12.2 percent. The composition of kukersite kerogen corresponds nearly to the empirical formula (C/sub 8/H/sub 11/O)n. One of the most significant differences between kukersite, coal, and lignite is the amount of alkali-soluble substances present. Kukersite has almost no humic acids. Samples of kukersite were brominated and chlorinated. The halogenated shales showed a solubility in absolute alcohol of 26 percent compared to only 0.31 percent for untreated shale. Enriched shale (4.5 percent ash) did not react with chlorine as much as did raw shale. Apparently the mineral matter acted catalytically during chlorination. The amount of soluble extract obtained by solvent treatment of kukersite ranged from 0.22 percent with chloroform to 2.20 percent with tetrachloroethane. Heat was the most effective agent for the depolymerization of kukersite kerogen. The percentage loss of weight due to drying in air was much less than in the presence of carbon dioxide. The results indicated that on drying in air, the powdered shale loses water and a volatile substance, probably the oxides of carbon, up to 80/sup 0/C. Carbon dioxide was also found to be present in the gases eliminated at the temperature of initial decomposition. Pulverized shale, heated for 6 hours at 220/sup 0/C, lost 2.6 percent of its weight; its solubility in carbon disulfide was 2.11 percent. Kukersite kerogen was formed from compounds that were resistent to bacteriological decomposition, such as waxes and resins, plus decomposition products of proteins, cellulose, and putrefaction products of

  2. Experimental demonstration of producing high resolution zone plates by spatial-frequency multiplication

    International Nuclear Information System (INIS)

    Yun, W.B.; Howells, M.R.

    1987-01-01

    In an earlier publication, the possibility of producing high resolution zone plates for x-ray applications by spatial-frequency multiplication was analyzed theoretically. The theory predicted that for a daughter zone plate generated from the interference of mth and nth diffraction orders of a parent zone plate, its primary focal spot size and focal length are one (m + n)th of their counterparts of the parent zone plate, respectively. It was also shown that a zone plate with the outermost zone width of as small as 13.8 nm might be produced by this technique. In this paper, we report an experiment which we carried out with laser light (λ = 4166A) for demonstrating this technique. In addition, an outlook for producing high resolution zone plates for x-ray application is briefly discussed

  3. Producing high-quality negatives from ERTS black-and-white transparancies

    Science.gov (United States)

    Richard J. Myhre

    1973-01-01

    A method has been devised for producing high-quality black-and-white negatives quickly and efficiently from dense transparencies orgininating from Earth Resources Technology Satellite imagery. Transparencies are evaluated on a standard light source to determine exposure and processing information needed for making negatives. A “System ASA Rating” was developed by...

  4. CHARACTERIZATION OF A NEW BACILLUS-STEAROTHERMOPHILUS ISOLATE - A HIGHLY THERMOSTABLE ALPHA-AMYLASE-PRODUCING STRAIN

    NARCIS (Netherlands)

    WIND, RD; BUITELAAR, RM; EGGINK, G; HUIZING, HJ; DIJKHUIZEN, L

    A novel strain of Bacillus stearothermophilus was isolated from samples of a potato-processing industry. Compared to known alpha-amylases from other B. stearothermophilus strains, the isolate was found to produce a highly thermostable alpha-amylase. The half-time of inactivation of this

  5. Experimental considerations on producing highly polarized liquid 3He in a matrix of solid 4He

    International Nuclear Information System (INIS)

    Greenberg, A.S.; Hebral, B.; Papoular, M.; Beal-Monod, M.T.

    1980-01-01

    Two experiments are briefly reviewed in which droplets of 3 He were formed in solid 4 He. These experiments indicate such conditions are favorable for the production of quasi-stable highly polarized liquid 3 He. A solid solution of dilute 3 He in 4 He is proposed as a promising system to produce experimentally realizable highly polarized liquid 3 He using the Castaing-Nozieres decompression

  6. Investing in Cognac Producing Vineyards to Hedge Wealth While Receiving High Returns

    OpenAIRE

    Hakob Hakobyan

    2015-01-01

    The general trend over the last decade for investments has been moving towards emerging markets, where investors are promised high returns for risky investments. These kind of investments favor the brave and bold, but are frightening for the risk averse. In this paper I will be presenting the opportunities that an investment into cognac producing vineyards can offer. High return and relatively low risk investment opportunities that exists in France. Included in the paper will be examples of l...

  7. High dislocation density structures and hardening produced by high fluency pulsed-ion-beam implantation

    International Nuclear Information System (INIS)

    Sharkeev, Yu.P.; Didenko, A.N.; Kozlov, E.V.

    1994-01-01

    The paper presents a review of experimental data on the ''long-range effect'' (a change in dislocation structure and in physicomechanical properties at distances considerably greater than the ion range value in ion-implanted metallic materials and semiconductors). Our results of electron microscopy studies of high density dislocation structure in ion-implanted metallic materials with different initial states are given. It has been shown that the nature of the dislocation structure and its quantitative characteristics in the implanted metals and alloys depend on the target initial state, the ion type and energy and the retained dose. The data obtained by different workers are in good agreement both with our results and with each other as well as with the results of investigation of macroscopic characteristics (wear resistance and microhardness). It has been established that the ''long-range effect'' occurs in metallic materials with a low yield point or high plasticity level and with little dislocation density in their initial state prior to ion implantation. ((orig.))

  8. The study on preparation of high dispersion and pure cerium dioxide for producing automotive exhaust catalysts

    International Nuclear Information System (INIS)

    Le Minh Tuan; Nguyen Trong Hung; Nguyen Thanh Chung

    2003-01-01

    The multi-stage counter-current solvent extraction process using TBP as the solvent has been carried out for purifying cerium and the ammonium carbonate precipitation method has been used to produce the cerium oxide of high dispersion and pure. The flow sheet of extraction system includes 3 extraction stages with O/A = 0.7,2 stripping stages and 4 scrubbing stages with O/A = 5. The condition for ammonium carbonate precipitation, drying and calcination have been investigated and a procedure that seem to be practically suitable to prepare cerium dioxide powder with great specific surface area for producing automotive exhaust catalyst has been proposed. (LMT)

  9. Screening on the high yield validamycin producing strain by implantation with N+ and Ti+ ion source

    International Nuclear Information System (INIS)

    Yu Long; An Xiao

    2007-01-01

    In order to compared the mutagenic effects of the validamycin producing the strain (Streptomyces hygroscopicus var. Jingganggensis Yen.) was implanted with two kinds of ion sources. The results showed that when two kinds of ion sources implanted into the strain by turns, more positive mutants and higher yield would be acquired. Using this method, a high-yielding strain B1-3 was obtained, which produce the titer of validamycin A of 21514, and was 54.4% higher than that of the original strain. (authors)

  10. Az észt névtervezés az észt nyelvpolitikai modell tükrében [The name management in the mirror of the Estonian LPP-model

    OpenAIRE

    Pomozi, Péter; Földesi, Eszter

    2016-01-01

    The Estonian model of language planning and policy, which has been serving the development and protection of the Estonian language in its current form since 2004, is one of the most successful of such strategies in Europe. It owes it success to the broad social and scientific consensus reached in questions of language policy, regardless of changes in government. The Development Plan of the Estonian Language divides Estonian language planning and policy into three parts: status planning, corpu...

  11. Method for producing ceramic composition having low friction coefficient at high operating temperatures

    Science.gov (United States)

    Lankford, Jr., James

    1988-01-01

    A method for producing a stable ceramic composition having a surface with a low friction coefficient and high wear resistance at high operating temperatures. A first deposition of a thin film of a metal ion is made upon the surface of the ceramic composition and then a first ion implantation of at least a portion of the metal ion is made into the near surface region of the composition. The implantation mixes the metal ion and the ceramic composition to form a near surface composite. The near surface composite is then oxidized sufficiently at high oxidizing temperatures to form an oxide gradient layer in the surface of the ceramic composition.

  12. Effects of Silica in Rice Husk Ash (RHA) in producing High Strength Concrete

    OpenAIRE

    Kartini, K; Nurul Nazierah, M.Y; Zaidahtulakmal, M.Z; Siti Aisyah, G

    2012-01-01

    High strength concrete (HSC) are known to have a higher amount of cement binder in the mix design properties with low w/b ratio. The high mass of cement content produced substantial heat liberation in the concrete due to the reaction between cement and water, which can lead to cracking. Additive likes silica fume is too expensive to use in the HSC in order to overcome the problems, however, the initiative of utilizing the rice husk ash (RHA) which have high silica content are apply for the de...

  13. Measurements of spatially resolved high resolution spectra of laser-produced plasmas. FY 83 annual report

    International Nuclear Information System (INIS)

    Feldman, U.

    1984-01-01

    A high resolution grazing incidence spectrograph, provided by the Naval Research Laboratory and the Goddard Space Flight Center, has been installed on the Omega laser facility of the Laboratory for Laser Energetics (LLE) at the University of Rochester. This 3 meter instrument, with a 1200 lines/mm grating blazed at 2 0 35', has produced extremely high quality spectra in the wavelength region 10 A to 100 A. Spectra have been obtained from glass microballoon targets that are coated with a variety of high-Z materials. Transitions from the Na-like and Ne-like ionization stages of Fe, Ni, Cu, and Kr have been identified

  14. Polarized Th2 like cells, in the absence of Th0 cells, are responsible for lymphocyte produced IL-4 in high IgE-producer schistosomiasis patients

    Directory of Open Access Journals (Sweden)

    Soares-Silveira Alda

    2002-07-01

    Full Text Available Abstract Background Human resistance to re-infection with S. mansoni is correlated with high levels of anti-soluble adult worm antigens (SWAP IgE. Although it has been shown that IL-4 and IL-5 are crucial in establishing IgE responses in vitro, the active in vivo production of these cytokines by T cells, and the degree of polarization of Th2 vs. Th0 in human schistosomiasis is not known. To address this question, we determined the frequency of IL-4 and IFN-γ or IL-5 and IL-2 producing lymphocytes from schistosomiasis patients with high or low levels of IgE anti-SWAP. Results Our analysis showed that high and low IgE-producers responded equally to schistosomiasis antigens as determined by proliferation. Moreover, patients from both groups displayed similar percentages of circulating lymphocytes. However, high IgE-producers had an increased percentage of activated CD4+ T cells as compared to the low IgE-producers. Moreover, intracellular cytokine analysis, after short-term stimulation with anti-CD3/CD28 mAbs, showed that IgE high-producers display an increase in the percentage of T lymphocytes expressing IL-4 and IL-5 as compared to IgE low-responders. A coordinate control of the frequency of IL-4 and IL-5 producing lymphocytes in IgE high, but not IgE low-responders, was observed. Conclusions High IgE phenotype human schistosomiasis patients exhibit a coordinate regulation of IL-4 and IL-5 producing cells and the lymphocyte derived IL-4 comes from true polarized Th2 like cells, in the absence of measurable Th0 cells as measured by co-production of IL-4 and IFN-γ.

  15. The Role of Language in (Recreating Tatar Diaspora Identity: The Case of the Estonian Tatars

    Directory of Open Access Journals (Sweden)

    Maarja Klaas

    2015-06-01

    Full Text Available This paper focuses on the meanings assigned to Tatar language among the Tatar diaspora in Estonia. According to interviews with Estonian Tatars as well as descriptions of field material from Tatarstan, language is an important aspect of Tatar ethnic identity. This paper will track common discourses about the Tatar language and the way it is connected to Tatar ethnic identity. Issues concerning Tatar language are used to demonstrate various ways of enacting Tatarness in Estonia. It is shown that Estonian Tatars worry about the vitality and purity of Tatar language, but for some, marginalization of dialects is also an issue. People categorized with the same identity labels by self and others can experience and enact their Tatarness in a variety of different ways.

  16. Field of genes: the politics of science and identity in the Estonian Genome Project.

    Science.gov (United States)

    Fletcher, Amy L

    2004-04-01

    This case study of the Estonian Genome Project (EGP) analyses the Estonian policy decision to construct a national human gene bank. Drawing upon qualitative data from newspaper articles and public policy documents, it focuses on how proponents use discourse to link the EGP to the broader political goal of securing Estonia's position within the Western/European scientific and cultural space. This dominant narrative is then situated within the analytical notion of the "brand state", which raises potentially negative political consequences for this type of market-driven genomic research. Considered against the increasing number of countries engaging in gene bank and/or gene database projects, this analysis of Estonia elucidates issues that cross national boundaries, while also illuminating factors specific to this small, post-Soviet state as it enters the global biocybernetic economy.

  17. Strategies for Estonian rural family enterprises. Eesti maapiirkonna pereettevõtete strateegia

    Directory of Open Access Journals (Sweden)

    Maret Kirsipuu

    2013-01-01

    Full Text Available The paper seeks to analyse family businesses in rural areas, family business strategies and re-registration of sole proprietors with the Centre of Registers and Information Systems (hereinafter Commercial Register in 2009, and to provide an overview of entrepreneurship policies targeted at Estonian rural businesses. Layoffs have increased the number of unemployed; some of those who have lost employment opt for social assistance benefits, but some others decide to become entrepreneurs. Many enterprising people in Estonia have set up a family enterprise, mainly in the sphere of services, agriculture and tourism. The Estonian entrepreneurship policy supports enterprising people and approves of entrepreneurship as a promoter of national economic development. One of the most positive qualities of family enterprises is their short decision-making chain, which ensures rapid implementation of the strategy.

  18. Short outlines of books by Estonian authors : [annotations] / Rutt Hinrikus, Janika Kronberg

    Index Scriptorium Estoniae

    Hinrikus, Rutt, 1946-

    1998-01-01

    Laretei, Käbi. Eksiil; Toona, Elin. Lotukata; Park, Eeva. Naeru õpilane; Luik, Viivi. Inimese kapike; Laaman, Ilona. Vesi ahjus; Viiding, Juhan (Üdi, Jüri). Kogutud luuletused; Paju, Juhan. Katkenud romaan; Paju, Juhan. Hõõguv rist; Estonian short stories / toim. Kajar Pruul ja Darlene Reddaway; Traat, Mats. Kartaago kiirrong; Kauksi Ülle. Säng; Kross, Jaan. Paigallend; Puhvel, Madli. Symbol of dawn; Kaplinski, Jaan. Võimaluste võimalikkus; Kaplinski, Jaan. Usk on uskmatus

  19. Estonian Perceptions of Security: Not Only About Russia and the Refugees

    OpenAIRE

    Veebel Viljar; Ploom Illimar

    2016-01-01

    The current study focuses on the Estonian perceptions of security and on the defence situation both globally and locally. The dynamic results of the public opinion surveys on security risks conducted in Estonia over the last 10 years (2006-2016) will be presented. In addition, to understand whether some of the security risks could be over- or underestimated in Estonia, these results will be compared with the views expressed recently by the World Economic Forum, particularly the Global Risks R...

  20. The Challenges Organic Food Processors Meet at Small Emerging Market – Estonian Case

    OpenAIRE

    Sarapuu, Kerttu; Pehme, Sirli; Peetsmann, Elen; Matt, Darja

    2014-01-01

    Organic farming and demand for organic products is continually a growing trend all over the world (Willer et al., 2013). In Estonia the share of organic land is 15% of all agricultural land and the number of organic farmers is also growing (Vetemaa, Mikk 2013). Estonian organic food market is still in forming stage being affected by local organic farming development, marketing situation, economic situation and consumer attitudes. Organic processing has clearly not kept up with organic farming...

  1. Assessment of the Estonian Research Development Technology and Innovation Funding System

    OpenAIRE

    Nedeva, Maria; Georghiou, Luke

    2003-01-01

    The objectives of the assessment of the RDTI funding system in Estonia as specified by the Terms of Reference are as follows: 1) to conduct a review of the current R&D funding system in Estonia; 2) to review the objectives of the Estonian R&D Strategy 2002-2006; 3) to review best practice in R&D funding elsewhere; and 4) to propose an efficient, transparent and accountable R&D funding system.

  2. Investigation of micro-plasma in physiological saline produced by a high-power YAG laser

    International Nuclear Information System (INIS)

    Lu Jian; Ni Xiaowu; He Anzhi

    1994-01-01

    Micro-plasma and shock waves in the physiological saline produced by a Q-switched pulse YAG laser with nearby optical breakdown threshold energy are investigated by using optical shadowing exploring method, and a series of optical shadow graphs of micro-plasma and shock waves versus the incident laser energy and the delay time are obtained. Influence of mechanical action of shock waves for the high-power pulse laser on the ophthalmic treatment is discussed

  3. Process for producing high purity isoolefins and dimers thereof by dissociation of ethers

    Science.gov (United States)

    Smith, L.A. Jr.; Jones, E.M. Jr.; Hearn, D.

    1984-05-08

    Alkyl tertiary butyl ether or alkyl tertiary amyl ether is dissociated by vapor phase contact with a cation acidic exchange resin at temperatures in the range of 150 to 250 F at LHSV of 0.1 to 20 to produce a stream consisting of unreacted ether, isobutene or isoamylene and an alcohol corresponding to the alkyl radical. After the alcohol is removed, the ether/isoolefin stream may be fractionated to obtain a high purity isoolefin (99+%) or the ether/isoolefin stream can be contacted in liquid phase with a cation acidic exchange resin to selectively dimerize the isoolefin in a highly exothermic reaction, followed by fractionation of the dimerization product to produce high purity diisoolefin (97+%). In the case where the alkyl is C[sub 3] to C[sub 6] and the corresponding alcohol is produced on dissociation of the ether, combined dissociation-distillation may be carried out such that isoolefin is the overhead product and alcohol the bottom. 2 figs.

  4. Metal chloride-treated graphene oxide to produce high-performance polymer solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Eun-Su; Noh, Yong-Jin; Kwon, Sung-Nam; Na, Seok-In, E-mail: nsi12@jbnu.ac.kr [Professional Graduate School of Flexible and Printable Electronics and Polymer Materials Fusion Research Center, Chonbuk National University, 664-14, Deokjin-dong, Deokjin-gu, Jeonju-si, Jeollabuk-do 561-756 (Korea, Republic of); Jeon, Ye-Jin [School of Materials Science and Engineering, Gwangju Institute of Science and Technology, Gwangju 500-712 (Korea, Republic of); Kim, Seok-Soon, E-mail: sskim@kunsan.ac.kr [Department of Nano and Chemical Engineering, Kunsan National University, Kunsan, Jeollabuk-do 753-701 (Korea, Republic of); Kim, Tae-Wook [Soft Innovative Materials Research Center, Institute of Advanced Composite Materials, Korea Institute of Science and Technology, San 101, Eunha-ri, Bongdong-eup, Wanju-gun, Jeollabuk-do 565-905 (Korea, Republic of)

    2015-07-13

    We introduce a simple but effective graphene oxide (GO) modification with metal chloride treatments to produce high-performance polymer solar cells (PSCs). The role of various metal chlorides on GO and their effects on device performances of PSCs was investigated. X-ray photoelectron spectroscopy, ultraviolet photoemission spectroscopy, and current-voltage measurement studies demonstrated that metal chloride can induce a p-doping effect and increase the GO work-function, thus resulting in an improved built-in potential and interfacial resistance in PSCs. The resultant PSCs with metal chloride exhibited improved device efficiency than those with the neat GO. Furthermore, with the metal chloride-doped GO, we finally achieved an excellent PSC-efficiency of 6.58% and a very desirable device stability, which constitute a highly similar efficiency but much better PSC life-time to conventional device with poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS). This study could be a valuable way to produce various PEDOT:PSS alternatives and beneficial for producing high-performance and cost-efficient polymeric devices.

  5. HIV testing and counselling in Estonian prisons, 2012 to 2013: aims, processes and impacts.

    Science.gov (United States)

    Kivimets, K; Uuskula, A

    2014-11-27

    We present data from an observational cohort study on human immunodeficiency virus (HIV) prevention and control measures in prisons in Estonia to assess the potential for HIV transmission in this setting. HIV testing and retesting data from the Estonian prison health department were used to estimate HIV prevalence and incidence in prison. Since 2002, voluntary HIV counselling and testing has routinely been offered to all prisoners and has been part of the new prisoners health check. At the end of 2012, there were 3,289 prisoners in Estonia, including 170 women: 28.5% were drug users and 15.6% were infected with HIV. Of the HIV-positive inmates, 8.3% were newly diagnosed on prison entry. In 2012, 4,387 HIV tests (including retests) were performed in Estonian prisons. Among 1,756 initially HIV-negative prisoners who were in prison for more than one year and therefore tested for HIV twice within 12 months (at entry and annual testing), one new HIV infection was detected, an incidence of 0.067 per 100 person-years (95% confidence interval (CI): 0.025–5.572). This analysis indicates low risk of HIV transmission in Estonian prisons. Implementation of HIV management interventions could impact positively on the health of prisoners and the communities to which they return.

  6. Estonian folk traditional experiences on natural anticancer remedies: from past to the future.

    Science.gov (United States)

    Sak, Katrin; Jürisoo, Kadi; Raal, Ain

    2014-07-01

    Despite diagnostic and therapeutic advancements, the burden of cancer is still increasing worldwide. Toxicity of current chemotherapeutics to normal cells and their resistance to tumor cells highlights the urgent need for new drugs with minimal adverse side effects. The use of natural anticancer agents has entered into the area of cancer research and increased efforts are being made to isolate bioactive products from medicinal plants. To lead the search for plants with potential cytotoxic activity, ethnopharmacological knowledge can give a great contribution. Therefore, the attention of this review is devoted to the natural remedies traditionally used for the cancer treatment by Estonian people over a period of almost 150 years. Two massive databases, the first one stored in the Estonian Folklore Archives and the second one in the electronic database HERBA ( http://herba.folklore.ee/ ), containing altogether more than 30 000 ethnomedicinal texts were systematically reviewed to compile data about the Estonian folk traditional experiences on natural anticancer remedies. As a result, 44 different plants with potential anticancer properties were elicited, 5 of which [Angelica sylvestris L. (Apiaceae), Anthemis tinctoria L. (Asteraceae), Pinus sylvestris L. (Pinaceae), Sorbus aucuparia L. (Rosaceae), and Prunus padus L. (Rosaceae)] have not been previously described with respect to their tumoricidal activities in the scientific literature, suggesting thus the potential herbal materials for further investigations of natural anticancer compounds.

  7. Comparison of knowledge, attitudes and behaviour regarding smoking among Estonian and Finnish physicians.

    Science.gov (United States)

    Pärna, Kersti; Rahu, Kaja; Barengo, Noël C; Rahu, Mati; Sandström, Patrick H; Jormanainen, Vesa J; Myllykangas, Markku T

    2005-01-01

    To compare smoking behaviour, attitudes and opinions towards smoking and smoking cessation among Estonian and Finnish physicians. A cross-sectional postal survey using a self-administered questionnaire was carried out among 2,480 Estonian and 2,075 Finnish physicians. Daily smoking prevalence was higher among Estonian physicians than among their Finnish counterparts in both male (18.6% and 6.7%) and female (6.6% and 3.6%). Compared to Estonia, physicians in Finland more often agreed that smoking is very harmful to their health, that trying to convince people to stop smoking is their responsibility and that smoking prevention should be part of the normal and special training of health professionals. In both countries, non-smoking physicians held more unfavourable attitudes towards smoking than those who were smoking. Physicians' own smoking patterns and quitting behaviour are important because physicians serve as models for their patients and play a key role in the reinforcement of smoke-free health facilities. These results remain a challenge to medical educators, especially in Estonia. Estonia needs to improve medical education in terms of motivating physicians to ask about the smoking patterns of their patients and of training medical students and resident physicians to counsel their patients to stop smoking.

  8. Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers

    Energy Technology Data Exchange (ETDEWEB)

    Auvinen, A; Salomaa, S [eds.; Radiation and Nuclear Safety Authority, Helsinki (Finland); Rahu, M; Veidebaum, T; Tekkel, M [eds.; Inst. of Experimental and Clinical Medicine, Tallinn (Estonia); Hakulinen, T [ed.; Finnish Cancer Registry, Helsinki (Finland); Boice, Jr, J D [ed.; Int. Epidemiology Inst., MD (United States)

    1998-09-01

    The report describes the development and summarizes the results of the project Cancer incidence and thyroid disease among Estonian Chernobyl clean-up workers. One of the goals of the report is to give research protocols and questionnaires for researchers involved in other studies. Eight previously published articles are also included summarizing the results. The development of the collaboration work of the project is described in the introduction of the report. Epidemiological methods are described in an article complemented by the protocol and English version of the questionnaire administered to all cleanup workers, as well as the data collection form of the thyroid study. The results from biological biodosimetry using both glycophorin A and FISH methods have shown that the radiation doses received by the Chernobyl cleanup workers were relatively low. Thyroid nodularity was not associated with any radiation exposure characteristic in the thyroid screening study. Estonian Chernobyl cleanup workers were followed up for cancer incidence through the Estonian Cancer Registry. No cases of leukemia or thyroid cancer were observed by the end of 1993. It is too early to observe possible effect on other types of cancer. However, mortality from suicides was increased compared with general population. Further follow-up and the extension to other Baltic countries in the future will undoubtedly strengthen the study. There are also plans for future projects covering areas from psychosocial factors to radiation biology

  9. US evaluation of volume brain lesions produced by high-intensity focused US

    International Nuclear Information System (INIS)

    Chua, R.V.; Chua, G.T.; Fry, F.J.; Franklin, T.D.; Wills, E.R.; Hastings, J.S.; Sanghui, N.T.

    1987-01-01

    Eighteen volume brain lesions produced by high-intensity focused US in the right cerebral hemispheres of research canines were evaluated by diagnostic US from immediately after ablation up to 62 days later. Animals were killed and perfused for whole-brain recovery. US evaluation of whole-brain specimens was performed. Histologic analysis of brain sections verified lesion placement, size, and tissue response to US. These sections were compared with US studies for correlation data. Correlation data suggest that US visualization may aid in accurate placement of volume brain lesions and in evaluation of effects of high-intensity focuses US in normal brain

  10. Seeding High Gain Harmonic Generation with Laser Harmonics produced in Gases

    CERN Document Server

    Lambert, Guillaume; Couprie, Marie Emmanuelle; Garzella, David; Doria, Andrea; Giannessi, Luca; Hara, Toru; Kitamura, Hideo; Shintake, Tsumoru

    2004-01-01

    Free electron Lasers employing High Gain Harmonic generation (HGHG) schemes are very promising coherent ligth sources for the soft X-ray regime. They offer both transverse and longitudinal coherence, while Self Amplified Spontaneous Emission schemes have a longitudinal coherence limited. We propose here to seed HGHG with high harmonics produced by a Ti:Sa femtosecond laser focused on a gas jet, tuneable in the 100-10 nm spectral region. Specifities concerning the implementation of this particular laser source as a seed for HGHG are investigated. Semi analytical , numerical 1D and 3D calculations are given, for the cases of the SCSS, SPARC and ARC-EN-CIEL projects.

  11. Application of laser additive manufacturing to produce dies for aluminium high pressure die casting

    CSIR Research Space (South Africa)

    Pereira, MFVT

    2012-07-01

    Full Text Available through immersion in liquid aluminium. The dipping cycle closely resembles the heating and cooling cycle of a typical aluminium die under casting conditions. The suitability of any LAM technology, that can produce fully dense metallic components... cost vs wrought manufactured 5.2 1,7 2. 2 Average cost Very High Medium High Table 3: Processing and finishing costs of test coupons 3.1 Cyclic Immersion in Molten Aluminium Figure 3 below shows the testing apparatus developed to simulate...

  12. High oleic acid content materials of rapeseed (Brassica napus) produced by radiation breeding

    International Nuclear Information System (INIS)

    Guan Chunyun; Liu Chunlin; Chen Sheyuan

    2006-01-01

    High oleic acid content rapeseed breeding has great significance, because high oleic acid oil is a healthy and nutritious oil, which is of a long shelflife and also propitious to producing biodiesel fuel. The high oleic acid content breeding materials of rapeseed (B. napus) were obtained by 80-100 kR ~(60)Co gamma ray ionizing radiation treatment of dry seeds and continuous selection. The results showed that the oleic acid contents of M (2), M (3) and M (4) progenies increased by different grades. Moreover, the oleic acid content of M (5) progeny increased greatly. The oleic acid contents were higher than 70% in the most of the plants and the highest one reached 93.5 %. The base G was transited by base A in fad (2) gene at the 270 site of high oleic acid mutation (M(6) 04-855). The location is at the beta folding area and conservative area of this protein. Base mutation at sites 1 044 and 1 062 also led to produce a stop condon. These changes in structure led to loss the function of fad (2). According to molecular mechanism of gene mutation, no matter what transvertion or transition happens, several replications are needed. That is to say several generations are needed. That was also the reason why high oleic acid content mutation occurred in later generations

  13. Selected wild strains of Agaricus bisporus produce high yields of mushrooms at 25°C.

    Science.gov (United States)

    Navarro, Pilar; Savoie, Jean-Michel

    2015-01-01

    To cultivate the button mushroom Agaricus bisporus in warm countries or during summer in temperate countries, while saving energy, is a challenge that could be addressed by using the biological diversity of the species. The objective was to evaluate the yield potential of eight wild strains previously selected in small scale experiments for their ability to produce mature fruiting bodies at 25°C and above. Culture units of 8 kg of compost were used. The yield expressed as weight or number per surface unit and earliness of fruiting were recorded during cultivation in climatic rooms at 17, 25 or 30°C. Only strains of A. bisporus var. burnettii were able to fruit at 30°C. At 25°C they produced the highest yields (27 kg m(-2)) and had best earliness. The yields at 25°C for the strains of A. bisporus var. bisporus ranged from 12 to 16 kg m(-2). The yield ratios 25°C/17°C ranged from 0.8 to 1.2. The variety burnettii originated in the Sonoran Desert in California showed adaptation for quickly producing fruiting bodies at high temperature when humidity conditions were favorable. Strains of the variety bisporus showed interesting potentials for their ability to produce mature fruiting bodies at higher temperature than present cultivars and might be used in breeding programs. Copyright © 2012 Revista Iberoamericana de Micología. Published by Elsevier Espana. All rights reserved.

  14. Time-resolved energy spectrum of a pseudospark-produced high-brightness electron beam

    International Nuclear Information System (INIS)

    Myers, T.J.; Ding, B.N.; Rhee, M.J.

    1992-01-01

    The pseudospark, a fast low-pressure gas discharge between a hollow cathode and a planar anode, is found to be an interesting high-brightness electron beam source. Typically, all electron beam produced in the pseudospark has the peak current of ∼1 kA, pulse duration of ∼50 ns, and effective emittance of ∼100 mm-mrad. The energy information of this electron beam, however, is least understood due to the difficulty of measuring a high-current-density beam that is partially space-charge neutralized by the background ions produced in the gas. In this paper, an experimental study of the time-resolved energy spectrum is presented. The pseudospark produced electron beam is injected into a vacuum through a small pinhole so that the electrons without background ions follow single particle motion; the beam is sent through a negative biased electrode and the only portion of beam whose energy is greater than the bias voltage can pass through the electrode and the current is measured by a Faraday cup. The Faraday cup signals with various bias voltage are recorded in a digital oscilloscope. The recorded waveforms are then numerically analyzed to construct a time-resolved energy spectrum. Preliminary results are presented

  15. Field trial on glucose-induced insulin and metabolite responses in Estonian Holstein and Estonian Red dairy cows in two herds

    Directory of Open Access Journals (Sweden)

    Kaart Tanel

    2010-01-01

    Full Text Available Abstract Background Insulin secretion and tissue sensitivity to insulin is considered to be one of the factors controlling lipid metabolism post partum. The objective of this study was to compare glucose-induced blood insulin and metabolite responses in Estonian Holstein (EH, n = 14 and Estonian Red (ER, n = 14 cows. Methods The study was carried out using the glucose tolerance test (GTT performed at 31 ± 1.9 days post partum during negative energy balance. Blood samples were obtained at -15, -5, 5, 10, 20, 30, 40, 50 and 60 min relative to infusion of 0.15 g/kg BW glucose and analysed for glucose, insulin, triglycerides (TG, non-esterified fatty acids (NEFA, cholesterol and β-hydroxybutyrate (BHB. Applying the MIXED Procedure with the SAS System the basal concentration of cholesterol, and basal concentration and concentrations at post-infusion time points for other metabolites, area under the curve (AUC for glucose and insulin, clearance rate (CR for glucose, and maximum increase from basal concentration for glucose and insulin were compared between breeds. Results There was a breed effect on blood NEFA (P P P P P P th min nadir (P th min postinfusion (P Conclusion Our results imply that glucose-induced changes in insulin concentration and metabolite responses to insulin differ between EH and ER dairy cows.

  16. Enzymatic pulp upgrade for producing high-value cellulose out of a Kraft paper pulp.

    Science.gov (United States)

    Hutterer, Christian; Kliba, Gerhard; Punz, Manuel; Fackler, Karin; Potthast, Antje

    2017-07-01

    The high-yield separation of polymeric parts from wood-derived lignocellulosic material is indispensable in biorefinery concepts. For the separation of cellulose and xylan from hardwood paper pulps to obtain pulps of high cellulose contents, simple alkaline extractions were found to be the most suitable technology, although having certain limitations. These are embodied by residual alkali resistant xylan incorporated in the pulp matrix. Further purification in order to produce pure cellulose with a low uniformity could be achieved selectively degrading residual xylan and depolymerizing the cellulose macromolecules by xylanase and cellulase. The latter help to adjust cellulose chain lengths for certain dissolving pulp grades while reducing the demand for ozone in subsequent TCF bleaching. Experiments applying different commercially available enzyme preparations revealed the dependency of xylanase performance on the residual xylan content in pulps being stimulated by additional cellulase usage. The action of the latter strongly depends on the cellulose allomorphy confirming the impact of the pulp morphology. Hence, the combined application of both types of enzymes offers a high potential for upgrading pulps in order to produce a pure and high-value cellulose product. Copyright © 2017 Elsevier Inc. All rights reserved.

  17. Spectral investigation of highly ionized bismuth plasmas produced by subnanosecond Nd:YAG laser pulses

    Science.gov (United States)

    Wu, Tao; Higashiguchi, Takeshi; Li, Bowen; Arai, Goki; Hara, Hiroyuki; Kondo, Yoshiki; Miyazaki, Takanori; Dinh, Thanh-Hung; Dunne, Padraig; O'Reilly, Fergal; Sokell, Emma; O'Sullivan, Gerry

    2016-02-01

    The unresolved transition arrays (UTAs) emitted from laser produced bismuth (Bi) plasma sources show potential for single-shot live cell imaging. We have measured extreme ultraviolet spectra from bismuth laser produced plasmas in the 1-7 nm region using a λ = 1064 nm Nd:YAG laser with a pulse duration of 150 ps. Comparison of spectra obtained under different laser power densities with calculations using the Hartree-Fock with configuration interaction Cowan suite of codes and the UTA formalism, as well as consideration of previous predictions of isoelectronic trends, are employed to identify lines and a number of new features in spectra from Bi XXIII to Bi XLVII. The results show that Δn = 0, n = 4-4 emission from highly charged ions merges to form intense UTAs in the 4 nm region and Δn = 1, n = 4-5 resonance transitions UTAs dominate the 1-3 nm region of the Bi spectrum.

  18. Polarization of protons produced in diffractive disintegration of deuterons by high-energy pions

    International Nuclear Information System (INIS)

    Gakh, G.Yi.; Rekalo, M.P.

    1996-01-01

    For the process of diffractive disintegration of unpolarized deuterons by the high-energy pions, π + d → π + p + n, the polarization characteristics of produced protons are calculated. Using the vector nature of the Pomeron exchange, the general structure of all components of proton polarization vector is found for d (π, π p) n. By the Pomeron-photon analogy, the amplitude of the process P + d → n + p is approximated by the isoscalar contribution of four Born diagrams similar to the case of deuteron electrodisintegration. Unitarization of the amplitude is achieved by introducing in multipole amplitudes the corresponding phases of np-scattering. The numerical calculation of all components of the polarization vector of protons, produced in the case of noncomplanar kinematics of the reaction π + d → π + p + n, is realized

  19. High Contrast Internal and External Coronagraph Masks Produced by Various Techniques

    Science.gov (United States)

    Balasubramanian, Kunjithapatha; Wilson, Daniel; White, Victor; Muller, Richard; Dickie, Matthew; Yee, Karl; Ruiz, Ronald; Shaklan, Stuart; Cady, Eric; Kern, Brian; hide

    2013-01-01

    Masks for high contrast internal and external coronagraphic imaging require a variety of masks depending on different architectures to suppress star light. Various fabrication technologies are required to address a wide range of needs including gradient amplitude transmission, tunable phase profiles, ultra-low reflectivity, precise small scale features, and low-chromaticity. We present the approaches employed at JPL to produce pupil plane and image plane coronagraph masks, and lab-scale external occulter type masks by various techniques including electron beam, ion beam, deep reactive ion etching, and black silicon technologies with illustrative examples of each. Further development is in progress to produce circular masks of various kinds for obscured aperture telescopes.

  20. Spectral investigation of highly ionized bismuth plasmas produced by subnanosecond Nd:YAG laser pulses

    International Nuclear Information System (INIS)

    Wu, Tao; Higashiguchi, Takeshi; Arai, Goki; Hara, Hiroyuki; Kondo, Yoshiki; Miyazaki, Takanori; Dinh, Thanh-Hung; Li, Bowen; Dunne, Padraig; O’Reilly, Fergal; Sokell, Emma; O’Sullivan, Gerry

    2016-01-01

    The unresolved transition arrays (UTAs) emitted from laser produced bismuth (Bi) plasma sources show potential for single-shot live cell imaging. We have measured extreme ultraviolet spectra from bismuth laser produced plasmas in the 1–7 nm region using a λ = 1064 nm Nd:YAG laser with a pulse duration of 150 ps. Comparison of spectra obtained under different laser power densities with calculations using the Hartree–Fock with configuration interaction Cowan suite of codes and the UTA formalism, as well as consideration of previous predictions of isoelectronic trends, are employed to identify lines and a number of new features in spectra from Bi XXIII to Bi XLVII. The results show that Δn = 0, n = 4–4 emission from highly charged ions merges to form intense UTAs in the 4 nm region and Δn = 1, n = 4–5 resonance transitions UTAs dominate the 1–3 nm region of the Bi spectrum. (paper)

  1. High Prevalence of Carbapenemase-Producing Enterobacteriaceae among Hospitalized Children in Luanda, Angola.

    Science.gov (United States)

    Kieffer, Nicolas; Nordmann, Patrice; Aires-de-Sousa, Marta; Poirel, Laurent

    2016-10-01

    This study aimed to evaluate the prevalence of carbapenemase-producing Enterobacteriaceae in Luanda, Angola. A total of 157 rectal samples were collected from children visiting a pediatric hospital in Luanda in March 2015. Fifty-seven imipenem-nonsusceptible enterobacterial isolates were recovered, most of which were non-clonally related. The blaOXA-181 (50/57) and blaNDM-1 (7/57) carbapenemase genes were identified. Notably, OXA-181-producing Escherichia coli isolates rarely coproduced extended-spectrum β-lactamases and consequently remained susceptible to broad-spectrum cephalosporins. The blaOXA-181 gene was always located on an IncX3 plasmid, while the blaNDM-1 gene was located on either IncFIA or IncA/C plasmids. The study identified a high prevalence of OXA-181 among hospitalized children in Angola. Copyright © 2016, American Society for Microbiology. All Rights Reserved.

  2. High-Level Culturability of Epiphytic Bacteria and Frequency of Biosurfactant Producers on Leaves

    Science.gov (United States)

    Burch, Adrien Y.; Do, Paulina T.; Sbodio, Adrian; Suslow, Trevor V.

    2016-01-01

    ABSTRACT To better characterize the bacterial community members capable of biosurfactant production on leaves, we distinguished culturable biosurfactant-producing bacteria from nonproducers and used community sequencing to compare the composition of these distinct cultured populations with that from DNA directly recovered from leaves. Communities on spinach, romaine, and head lettuce leaves were compared with communities from adjacent samples of soil and irrigation source water. Soil communities were poorly described by culturing, with recovery of cultured representatives from only 21% of the prevalent operational taxonomic units (OTUs) (>0.2% reads) identified. The dominant biosurfactant producers cultured from soil included bacilli and pseudomonads. In contrast, the cultured communities from leaves are highly representative of the culture-independent communities, with over 85% of the prevalent OTUs recovered. The dominant taxa of surfactant producers from leaves were pseudomonads as well as members of the infrequently studied genus Chryseobacterium. The proportions of bacteria cultured from head lettuce and romaine leaves that produce biosurfactants were directly correlated with the culture-independent proportion of pseudomonads in a given sample, whereas spinach harbored a wider diversity of biosurfactant producers. A subset of the culturable bacteria in irrigation water also became enriched on romaine leaves that were irrigated overhead. Although our study was designed to identify surfactant producers on plants, we also provide evidence that most bacteria in some habitats, such as agronomic plant surfaces, are culturable, and these communities can be readily investigated and described by more classical culturing methods. IMPORTANCE The importance of biosurfactant production to the bacteria that live on waxy leaf surfaces as well as their ability to be accurately assessed using culture-based methodologies was determined by interrogating epiphytic populations by

  3. Low temperature superconductor and aligned high temperature superconductor magnetic dipole system and method for producing high magnetic fields

    Science.gov (United States)

    Gupta, Ramesh; Scanlan, Ronald; Ghosh, Arup K.; Weggel, Robert J.; Palmer, Robert; Anerella, Michael D.; Schmalzle, Jesse

    2017-10-17

    A dipole-magnet system and method for producing high-magnetic-fields, including an open-region located in a radially-central-region to allow particle-beam transport and other uses, low-temperature-superconducting-coils comprised of low-temperature-superconducting-wire located in radially-outward-regions to generate high magnetic-fields, high-temperature-superconducting-coils comprised of high-temperature-superconducting-tape located in radially-inward-regions to generate even higher magnetic-fields and to reduce erroneous fields, support-structures to support the coils against large Lorentz-forces, a liquid-helium-system to cool the coils, and electrical-contacts to allow electric-current into and out of the coils. The high-temperature-superconducting-tape may be comprised of bismuth-strontium-calcium-copper-oxide or rare-earth-metal, barium-copper-oxide (ReBCO) where the rare-earth-metal may be yttrium, samarium, neodymium, or gadolinium. Advantageously, alignment of the large-dimension of the rectangular-cross-section or curved-cross-section of the high-temperature-superconducting-tape with the high-magnetic-field minimizes unwanted erroneous magnetic fields. Alignment may be accomplished by proper positioning, tilting the high-temperature-superconducting-coils, forming the high-temperature-superconducting-coils into a curved-cross-section, placing nonconducting wedge-shaped-material between windings, placing nonconducting curved-and-wedge-shaped-material between windings, or by a combination of these techniques.

  4. Properties of Laser-Produced Highly Charged Heavy Ions for Direct Injection Scheme

    CERN Document Server

    Sakakibara, Kazuhiko; Hayashizaki, Noriyosu; Ito, Taku; Kashiwagi, Hirotsugu; Okamura, Masahiro

    2005-01-01

    To accelerate highly charged intense ion beam, we have developed the Direct Plasma Injection Scheme (DPIS) with laser ion source. In this scheme an ion beam from a laser ion source is injected directly to a RFQ linac without a low energy beam transport (LEBT) and the beam loss in the LEBT can be avoided. We achieved high current acceleration of carbon ions (60mA) by DPIS with the high current optimized RFQ. As the next setp we will use heavier elements like Ag, Pb, Al and Cu as target in LIS (using CO2, Nd-YAG or other laser) for DPIS and will examine properties of laser-produced plasma (the relationship of between charge state and laser power density, the current dependence of the distance from the target, etc).

  5. High-intensity laser-accelerated ion beam produced from cryogenic micro-jet target

    Energy Technology Data Exchange (ETDEWEB)

    Gauthier, M., E-mail: maxence.gauthier@stanford.edu; Kim, J. B.; Curry, C. B.; Gamboa, E. J.; Göde, S.; Propp, A.; Glenzer, S. H. [SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Aurand, B.; Willi, O. [Heinrich-Heine-University Düsseldorf, Düsseldorf (Germany); Goyon, C.; Hazi, A.; Pak, A.; Ruby, J.; Williams, G. J. [Lawrence Livermore National Laboratory, Livermore, California 94551 (United States); Kerr, S. [University of Alberta, Edmonton, Alberta T6G 1R1 (Canada); Ramakrishna, B. [Indian Institute of Technology, Hyderabad (India); Rödel, C. [SLAC National Accelerator Laboratory, Menlo Park, California 94025 (United States); Friedrich-Schiller-University Jena, Jena (Germany)

    2016-11-15

    We report on the successful operation of a newly developed cryogenic jet target at high intensity laser-irradiation. Using the frequency-doubled Titan short pulse laser system at Jupiter Laser Facility, Lawrence Livermore National Laboratory, we demonstrate the generation of a pure proton beam a with maximum energy of 2 MeV. Furthermore, we record a quasi-monoenergetic peak at 1.1 MeV in the proton spectrum emitted in the laser forward direction suggesting an alternative acceleration mechanism. Using a solid-density mixed hydrogen-deuterium target, we are also able to produce pure proton-deuteron ion beams. With its high purity, limited size, near-critical density, and high-repetition rate capability, this target is promising for future applications.

  6. Electrorefining of High Carbon Ferromanganese in Molten Salts to Produce Pure Ferromanganese

    Directory of Open Access Journals (Sweden)

    Xiao S. J.

    2017-09-01

    Full Text Available High carbon ferromanganese is used as a starting material to prepare pure ferromanganese by electrorefining in molten salts. High carbon ferromanganese was applied as the anode, molybdenum was the cathode and Ag/AgCl was the reference electrode. The anodic dissolution was investigated by linear polarization in molten NaCl-KCl system. Then potentiostatic electrolysis was carried out to produce pure ferromanganese from high carbon ferromanganese. The cathodic product was determined to be a mixture of manganese and iron by x-ray diffraction (XRD. The content of carbon in the product was analyzed by carbon and sulfur analyzer. The post-electrolysis anode was characterized by scanning electron microscope (SEM. The mechanism of the anode dissolution and the distribution of the main impurity of carbon and silicon after electrolysis were discussed.

  7. Development of high-performance ER gel produced by electric-field assisted molding

    International Nuclear Information System (INIS)

    Kakinuma, Y; Aoyama, T; Anzai, H

    2009-01-01

    Electro-rheological gel (ERG) is a novel functional elastomer whose surface frictional and adhesive property varies according to the intensity of applied electric field. This peculiar phenomenon is named as Electro-adhesive effect. A generated shear stress of ERG under applied electric field is approximately 30∼40 times higher than that of ERF because of high adhesive strength. However, the performances of ERG vary widely due to its surface condition, especially density and distribution of ER particles at the surface. In order to stabilize and improve the performance of ERG, the electric- filed assisted molding process is proposed as the producing method of ERG. In this study, first, the principle of electro-adhesive effect is theoretically investigated. Second, a high-performance ERG produced by the proposed process, in which ER particles are aligned densely at the surface, is developed and its performance is evaluated experimentally. As the experimental result, the high-performance ERG shows twice higher shear stress than the conventional ERG.

  8. Development of high-performance ER gel produced by electric-field assisted molding

    Energy Technology Data Exchange (ETDEWEB)

    Kakinuma, Y; Aoyama, T [Department of System Design Engineering, Keio University, 3-14-1 Hiyoshi Kouhoku-ku Yokohama (Japan); Anzai, H [Fujikura kasei Co., Ltd. 2-6-15 Shibakouen, Minato-ku, Tokyo (Japan)], E-mail: kakinuma@sd.keio.ac.jp

    2009-02-01

    Electro-rheological gel (ERG) is a novel functional elastomer whose surface frictional and adhesive property varies according to the intensity of applied electric field. This peculiar phenomenon is named as Electro-adhesive effect. A generated shear stress of ERG under applied electric field is approximately 30{approx}40 times higher than that of ERF because of high adhesive strength. However, the performances of ERG vary widely due to its surface condition, especially density and distribution of ER particles at the surface. In order to stabilize and improve the performance of ERG, the electric- filed assisted molding process is proposed as the producing method of ERG. In this study, first, the principle of electro-adhesive effect is theoretically investigated. Second, a high-performance ERG produced by the proposed process, in which ER particles are aligned densely at the surface, is developed and its performance is evaluated experimentally. As the experimental result, the high-performance ERG shows twice higher shear stress than the conventional ERG.

  9. High value added lipids produced by microorganisms: a potential use of sugarcane vinasse.

    Science.gov (United States)

    Fernandes, Bruna Soares; Vieira, João Paulo Fernandes; Contesini, Fabiano Jares; Mantelatto, Paulo Eduardo; Zaiat, Marcelo; Pradella, José Geraldo da Cruz

    2017-12-01

    This review aims to present an innovative concept of high value added lipids produced by heterotrophic microorganisms, bacteria and fungi, using carbon sources, such as sugars, acids and alcohols that could come from sugarcane vinasse, which is the main byproduct from ethanol production that is released in the distillation step. Vinasse is a rich carbon source and low-cost feedstock produced in large amounts from ethanol production. In 2019, the Brazilian Ministry of Agriculture, Livestock and Food Supply estimates that growth of ethanol domestic consumption will be 58.8 billion liters, more than double the amount in 2008. This represents the annual production of more than 588 billion liters of vinasse, which is currently used as a fertilizer in the sugarcane crop, due to its high concentration of minerals, mainly potassium. However, studies indicate some disadvantages such as the generation of Greenhouse Gas emission during vinasse distribution in the crop, as well as the possibility of contaminating the groundwater and soil. Therefore, the development of programs for sustainable use of vinasse is a priority. One profitable alternative is the fermentation of vinasse, followed by an anaerobic digester, in order to obtain biomaterials such as lipids, other byproducts, and methane. Promising high value added lipids, for instance carotenoids and polyunsaturated fatty acids (PUFAS), with a predicted market of millions of US$, could be produced using vinasse as carbon source, to guide an innovative concept for sustainable production. Example of lipids obtained from the fermentation of compounds present in vinasse are vitamin D, which comes from yeast sucrose fermentation and Omega 3, which can be obtained by bacteria and fungi fermentation. Additionally, several other compounds present in vinasse can be used for this purpose, including sucrose, ethanol, lactate, pyruvate, acetate and other carbon sources. Finally, this paper illustrates the potential market and

  10. Automation of labelling of Lipiodol with high-activity generator-produced 188Re

    International Nuclear Information System (INIS)

    Lepareur, Nicolas; Ardisson, Valerie; Noiret, Nicolas; Boucher, Eveline; Raoul, Jean-Luc; Clement, Bruno; Garin, Etienne

    2011-01-01

    This work describes optimisation of the kit formulation for labelling of Lipiodol with high-activity generator-produced rhenium-188. Radiochemical purity (RCP) was 92.52±2.3% and extraction yield was 98.56±1.2%. The synthesis has been automated with a TADDEO module (Comecer) giving a mean final yield of 52.68±9.6%, and reducing radiation burden to the radiochemist by 80%. Radiolabelled Lipiodol ( 188 Re-SSS/Lipiodol) is stable for at least 7 days (RCP=91.07±0.9%).

  11. RNA-Seq Highlights High Clonal Variation in Monoclonal Antibody Producing CHO Cells

    DEFF Research Database (Denmark)

    Orellana, Camila A.; Marcellin, Esteban; Palfreyman, Robin W.

    2018-01-01

    The development of next-generation sequencing technologies has opened new opportunities to better characterize complex eukaryotic cells. Chinese hamster ovary (CHO) cells play a primary role in therapeutic protein production, with currently five of the top ten blockbuster drugs produced in CHO......-regulation of genes encoding secreted glycoproteins is found to be the most significant change. The large number of significant differences even between subclones challenges the notion of identifying and manipulating a few key genes to generate high production CHO cell lines....

  12. High plasma rotation velocity and density transitions by biased electrodes in RF produced, magnetized plasma

    International Nuclear Information System (INIS)

    Matsuyama, Shoichiro; Shinohara, Shunjiro

    2001-01-01

    A large density profile modification was successfully obtained by voltage biasing to electrodes inserted in a RF (radio frequency) produced, magnetized plasma, and formation of strong shear of azimuthal plasma rotation velocity in a supersonic regime was found. For the case of biasing to an electrode near the central plasma region, two types of density transitions were observed in the outer plasma region: one was an oscillatory transition between two states, and the other was a transition from high to low density states with a large reduction of density fluctuations. (author)

  13. High plasma rotation velocity and density transitions by biased electrodes in RF produced, magnetized plasma

    Energy Technology Data Exchange (ETDEWEB)

    Matsuyama, Shoichiro; Shinohara, Shunjiro [Kyushu Univ., Interdisciplinary Graduate School of Engineering Sciences, Fukuoka (Japan)

    2001-07-01

    A large density profile modification was successfully obtained by voltage biasing to electrodes inserted in a RF (radio frequency) produced, magnetized plasma, and formation of strong shear of azimuthal plasma rotation velocity in a supersonic regime was found. For the case of biasing to an electrode near the central plasma region, two types of density transitions were observed in the outer plasma region: one was an oscillatory transition between two states, and the other was a transition from high to low density states with a large reduction of density fluctuations. (author)

  14. Induction heating of rotating nonmagnetic billet in magnetic field produced by high-parameter permanent magnets

    Directory of Open Access Journals (Sweden)

    Ivo Doležel

    2014-04-01

    Full Text Available An advanced way of induction heating of nonmagnetic billets is discussed and modeled. The billet rotates in a stationary magnetic field produced by unmoving high-parameter permanent magnets fixed on magnetic circuit of an appropriate shape. The mathematical model of the problem consisting of two coupled partial differential equations is solved numerically, in the monolithic formulation. Computations are carried out using our own code Agros2D based on a fully adaptive higher-order finite element method. The most important results are verified experimentally on our own laboratory device.

  15. Ultra high speed framing photographs of laser produced plasmas using a picosecond optical shutter

    International Nuclear Information System (INIS)

    Gillman, G.B.; Ramsden, S.A.

    1975-01-01

    A study has been carried out of the spatial transmission properties of the optical Kerr effect shutter and it has been used to take ultra high speed framing photographs of laser produced plasmas in air and from solid targets. With a 1cm long CS 2 cell of aperture 5cm 2 a transmission of approximately 5% and an on/off contrast ratio of 10 4 was obtained. An image intensifier was necessary to obtain adequately exposed photographs of the plasma and the overall spatial resolution of the system was approximately 2μ. (author)

  16. High density flux of Co nanoparticles produced by a simple gas aggregation apparatus

    Energy Technology Data Exchange (ETDEWEB)

    Landi, G. T.; Romero, S. A.; Santos, A. D. [Departamento de Fisica dos Materiais e Mecanica, Laboratorio de Materiais Magneticos, Instituto de Fisica, Universidade de Sao Paulo, Caixa Postal 66318, 05314-970 Sao Paulo, SP (Brazil)

    2010-03-15

    Gas aggregation is a well known method used to produce clusters of different materials with good size control, reduced dispersion, and precise stoichiometry. The cost of these systems is relatively high and they are generally dedicated apparatuses. Furthermore, the usual sample production speed of these systems is not as fast as physical vapor deposition devices posing a problem when thick samples are needed. In this paper we describe the development of a multipurpose gas aggregation system constructed as an adaptation to a magnetron sputtering system. The cost of this adaptation is negligible and its installation and operation are both remarkably simple. The gas flow for flux in the range of 60-130 SCCM (SCCM denotes cubic centimeter per minute at STP) is able to completely collimate all the sputtered material, producing spherical nanoparticles. Co nanoparticles were produced and characterized using electron microscopy techniques and Rutherford back-scattering analysis. The size of the particles is around 10 nm with around 75 nm/min of deposition rate at the center of a Gaussian profile nanoparticle beam.

  17. High density flux of Co nanoparticles produced by a simple gas aggregation apparatus

    International Nuclear Information System (INIS)

    Landi, G. T.; Romero, S. A.; Santos, A. D.

    2010-01-01

    Gas aggregation is a well known method used to produce clusters of different materials with good size control, reduced dispersion, and precise stoichiometry. The cost of these systems is relatively high and they are generally dedicated apparatuses. Furthermore, the usual sample production speed of these systems is not as fast as physical vapor deposition devices posing a problem when thick samples are needed. In this paper we describe the development of a multipurpose gas aggregation system constructed as an adaptation to a magnetron sputtering system. The cost of this adaptation is negligible and its installation and operation are both remarkably simple. The gas flow for flux in the range of 60-130 SCCM (SCCM denotes cubic centimeter per minute at STP) is able to completely collimate all the sputtered material, producing spherical nanoparticles. Co nanoparticles were produced and characterized using electron microscopy techniques and Rutherford back-scattering analysis. The size of the particles is around 10 nm with around 75 nm/min of deposition rate at the center of a Gaussian profile nanoparticle beam.

  18. Towards The Operational Oceanographic Model System In Estonian Coastal Sea, Baltic Sea

    Science.gov (United States)

    Kõuts, T.; Elken, J.; Raudsepp, U.

    An integrated system of nested 2D and 3D hydrodynamic models together with real time forcing data asquisition is designed and set up in pre-operational mode in the Gulf of Finland and Gulf of Riga, the Baltic Sea. Along the Estonian coast, implicit time-stepping 3D models are used in the deep bays and 2D models in the shallow bays with ca 200 m horizontal grid step. Specific model setups have been verified by in situ current measurements. Optimum configuration of initial parameters has been found for certain critical locations, usually ports, oil terminals, etc. Operational system in- tegrates also section of historical database of most important hydrologic parameters in the region, allowing use of certain statistical analysis and proper setup of initial conditions for oceanographic models. There is large variety of applications for such model system, ranging from environmental impact assessment at local coastal sea pol- lution problems to forecast of offshore blue algal blooms. Most probable risk factor in the coastal sea engineering is oil pollution, therefore current operational model sys- tem has direct custom oriented output the oil spill forecast for critical locations. Oil spill module of the operational system consist the automatic weather and hydromet- ric station (distributed in real time to internet) and prognostic model of sea surface currents. System is run using last 48 hour wind data and wind forecast and estimates probable oil deposition areas on the shoreline under certain weather conditions. Cal- culated evolution of oil pollution has been compared with some real accidents in the past and there was found good agreement between model and measurements. Graphi- cal user interface of oil spill model is currently installed at location of port authorities (eg. Muuga port), so in case of accidents it could be used in real time supporting the rescue operations. In 2000 current pre-operational oceanographic model system has been sucessfully used to

  19. High doses of dextromethorphan, an NMDA antagonist, produce effects similar to classic hallucinogens

    Science.gov (United States)

    Carter, Lawrence P.; Johnson, Matthew W.; Mintzer, Miriam Z.; Klinedinst, Margaret A.; Griffiths, Roland R.

    2013-01-01

    Rationale Although reports of dextromethorphan (DXM) abuse have increased recently, few studies have examined the effects of high doses of DXM. Objective This study in humans evaluated the effects of supratherapeutic doses of DXM and triazolam. Methods Single, acute, oral doses of DXM (100, 200, 300, 400, 500, 600, 700, 800 mg/70 kg), triazolam (0.25, 0.5 mg/70kg), and placebo were administered to twelve healthy volunteers with histories of hallucinogen use, under double-blind conditions, using an ascending dose run-up design. Subjective, behavioral, and physiological effects were assessed repeatedly after drug administration for 6 hours. Results Triazolam produced dose-related increases in subject-rated sedation, observer-rated sedation, and behavioral impairment. DXM produced a profile of dose-related physiological and subjective effects differing from triazolam. DXM effects included increases in blood pressure, heart rate, and emesis, increases in observer-rated effects typical of classic hallucinogens (e.g. distance from reality, visual effects with eyes open and closed, joy, anxiety), and participant ratings of stimulation (e.g. jittery, nervous), somatic effects (e.g. tingling, headache), perceptual changes, end-of-session drug liking, and mystical-type experience. After 400 mg/70kg DXM, 11 of 12 participants indicated on a pharmacological class questionnaire that they thought they had received a classic hallucinogen (e.g. psilocybin). Drug effects resolved without significant adverse effects by the end of the session. In a 1-month follow up volunteers attributed increased spirituality and positive changes in attitudes, moods, and behavior to the session experiences. Conclusions High doses of DXM produced effects distinct from triazolam and had characteristics that were similar to the classic hallucinogen psilocybin. PMID:22526529

  20. The Advanced High-Temperature Reactor (AHTR) for Producing Hydrogen to Manufacture Liquid Fuels

    International Nuclear Information System (INIS)

    Forsberg, C.W.; Peterson, P.F.; Ott, L.

    2004-01-01

    Conventional world oil production is expected to peak within a decade. Shortfalls in production of liquid fuels (gasoline, diesel, and jet fuel) from conventional oil sources are expected to be offset by increased production of fuels from heavy oils and tar sands that are primarily located in the Western Hemisphere (Canada, Venezuela, the United States, and Mexico). Simultaneously, there is a renewed interest in liquid fuels from biomass, such as alcohol; but, biomass production requires fertilizer. Massive quantities of hydrogen (H2) are required (1) to convert heavy oils and tar sands to liquid fuels and (2) to produce fertilizer for production of biomass that can be converted to liquid fuels. If these liquid fuels are to be used while simultaneously minimizing greenhouse emissions, nonfossil methods for the production of H2 are required. Nuclear energy can be used to produce H2. The most efficient methods to produce H2 from nuclear energy involve thermochemical cycles in which high-temperature heat (700 to 850 C) and water are converted to H2 and oxygen. The peak nuclear reactor fuel and coolant temperatures must be significantly higher than the chemical process temperatures to transport heat from the reactor core to an intermediate heat transfer loop and from the intermediate heat transfer loop to the chemical plant. The reactor temperatures required for H2 production are at the limits of practical engineering materials. A new high-temperature reactor concept is being developed for H2 and electricity production: the Advanced High-Temperature Reactor (AHTR). The fuel is a graphite-matrix, coated-particle fuel, the same type that is used in modular high-temperature gas-cooled reactors (MHTGRs). The coolant is a clean molten fluoride salt with a boiling point near 1400 C. The use of a liquid coolant, rather than helium, reduces peak reactor fuel and coolant temperatures 100 to 200 C relative to those of a MHTGR. Liquids are better heat transfer fluids than gases

  1. Firetube boiler with high efficiency for producing saturated or superheated steam

    Energy Technology Data Exchange (ETDEWEB)

    Carosso, V J; Carosso, J Y

    1976-10-07

    This boiler for producing saturated or super-heated steam is to be manufactured in one piece or in units which can be assembled at site without skilled workers, at the factory. It is to have a high efficiency and dimensions which permit the transport of the completely assembled boiler by road transport. The relatively small water-steam vessel lies across the longitudinal axis of the boiler in the rear boiler space over a battery of preheater tubes. By these measures and by a very detailed and appropriately described rational arrangement of other parts, such as convection bundles, primary and secondary superheater, evaporation tubes, which form an 'evaporation shield', upper and lower longitudinal chambers with vertical connecting pipes of different crossections, the above mentioned condition for space requirement is fulfilled and a high efficiency should be achieved, but with considerable expense.

  2. Producing High Intense Attosecond Pulse Train by Interaction of Three-Color Pulse and Overdense Plasma

    Science.gov (United States)

    Salehi, M.; Mirzanejad, S.

    2017-05-01

    Amplifying the attosecond pulse by the chirp pulse amplification method is impossible. Furthermore, the intensity of attosecond pulse is low in the interaction of laser pulse and underdense plasma. This motivates us to propose using a multi-color pulse to produce the high intense attosecond pulse. In the present study, the relativistic interaction of a three-color linearly-polarized laser-pulse with highly overdense plasma is studied. We show that the combination of {{ω }}1, {{ω }}2 and {{ω }}3 frequencies decreases the instance full width at half maximum reflected attosecond pulse train from the overdense plasma surface. Moreover, we show that the three-color pulse increases the intensity of generated harmonics, which is explained by the relativistic oscillating mirror model. The obtained results demonstrate that if the three-color laser pulse interacts with overdense plasma, it will enhance two orders of magnitude of intensity of ultra short attosecond pulses in comparison with monochromatic pulse.

  3. State Support for Promotion of Electrical Energy Produced in High Efficiency Cogeneration in Romania

    Directory of Open Access Journals (Sweden)

    Mushatescu V.

    2016-12-01

    Full Text Available Romania accumulated a useful experience in supporting high efficient cogeneration through a bonus type scheme. Spreading this experience to other countries that can choose a similar support scheme could lead to important savings and better results in developing this efficient tool. This state aid is operational, targeted to new investments stimulation for cogeneration technologies and replacement or existing plants rehabilitation. Present paper focuses on the results of support scheme after five years of its application: increase of number of producers who benefit of this aid, raising of general efficiency of high efficient cogeneration, important savings of primary energy and CO2 emissions avoided. On the other hand, use of this scheme showed a number of problems (to which this paper proposes adequate solutions on institutional/administrative, investition, technical, economical-financial and social frameworks that influences beneficiaries and/or financiers of state aid.

  4. Diamond dispersed cemented carbide produced without using ultra high pressure equipment

    International Nuclear Information System (INIS)

    Moriguchi, H.; Tsuzuki, K.; Ikegaya, A.

    2001-01-01

    We have developed a composite material of dispersed diamond particles in cemented carbide without using ultra high pressure equipment. The developed diamond dispersed cemented carbide combines the excellent properties of cemented carbide with diamond and also provides 1.5 times improved fracture toughness over that of cemented carbide. They also show 10 times higher wear resistance over that of cemented carbide in a wear resistance test against bearing steel, and 5 times greater grindability than diamond compacts. Because ultra high pressure equipment is not used to produce the developed material, large compacts over 100 mm in diameter can be manufactured. The developed material showed 10-25 times higher wear resistance in real use as wear-resistant tools such as centerless blades and work-rests. (author)

  5. Crystalline and amorphous carbon nitride films produced by high-energy shock plasma deposition

    International Nuclear Information System (INIS)

    Bursilll, L.A.; Peng, Julin; Gurarie, V.N.; Orlov, A.V.; Prawer, S.

    1995-01-01

    High-energy shock plasma deposition techniques are used to produce carbon-nitride films containing both crystalline and amorphous components. The structures are examined by high-resolution transmission electron microscopy, parallel-electron-energy loss spectroscopy and electron diffraction. The crystalline phase appears to be face-centered cubic with unit cell parameter approx. a=0.63nm and it may be stabilized by calcium and oxygen at about 1-2 at % levels. The carbon atoms appear to have both trigonal and tetrahedral bonding for the crystalline phase. There is PEELS evidence that a significant fraction of the nitrogen atoms have sp 2 trigonal bonds in the crystalline phase. The amorphous carbon-nitride film component varies from essentially graphite, containing virtually no nitrogen, to amorphous carbon-nitride containing up to 10 at % N, where the fraction of sp 3 bonds is significant. 15 refs., 5 figs

  6. Perceived Annoyance to Noise Produced by a Distributed Electric Propulsion High Lift System

    Science.gov (United States)

    Palumbo, Dan; Rathsam, Jonathan; Christian, Andrew; Rafaelof, Menachem

    2016-01-01

    Results of a psychoacoustic test performed to understand the relative annoyance to noise produced by several configurations of a distributed electric propulsion high lift system are given. It is found that the number of propellers in the system is a major factor in annoyance perception. This is an intuitive result as annoyance increases, in general, with frequency, and, the blade passage frequency of the propellers increases with the number of propellers. Additionally, the data indicate that having some variation in the blade passage frequency from propeller-to-propeller is beneficial as it reduces the high tonality generated when all the propellers are spinning in synchrony at the same speed. The propellers can be set to spin at different speeds, but it was found that allowing the motor controllers to drift within 1% of nominal settings produced the best results (lowest overall annoyance). The methodology employed has been demonstrated to be effective in providing timely feedback to designers in the early stages of design development.

  7. Niobium Carbide-Reinforced Al Matrix Composites Produced by High-Energy Ball Milling

    Science.gov (United States)

    Travessa, Dilermando Nagle; Silva, Marina Judice; Cardoso, Kátia Regina

    2017-06-01

    Aluminum and its alloys are key materials for the transportation industry as they contribute to the development of lightweight structures. The dispersion of hard ceramic particles in the Al soft matrix can lead to a substantial strengthening effect, resulting in composite materials exhibiting interesting mechanical properties and inspiring their technological use in sectors like the automotive and aerospace industries. Powder metallurgy techniques are attractive to design metal matrix composites, achieving a homogeneous distribution of the reinforcement into the metal matrix. In this work, pure aluminum has been reinforced with particles of niobium carbide (NbC), an extremely hard and stable refractory ceramic. Its use as a reinforcing phase in metal matrix composites has not been deeply explored. Composite powders produced after different milling times, with 10 and 20 vol pct of NbC were produced by high-energy ball milling and characterized by scanning electron microscopy and by X-ray diffraction to establish a relationship between the milling time and size, morphology, and distribution of the particles in the composite powder. Subsequently, an Al/10 pct NbC composite powder was hot extruded into cylindrical bars. The strength of the obtained composite bars is comparable to the commercial high-strength, aeronautical-grade aluminum alloys.

  8. High Frequency and Diversity of Antimicrobial Activities Produced by Nasal Staphylococcus Strains against Bacterial Competitors.

    Directory of Open Access Journals (Sweden)

    Daniela Janek

    2016-08-01

    Full Text Available The human nasal microbiota is highly variable and dynamic often enclosing major pathogens such as Staphylococcus aureus. The potential roles of bacteriocins or other mechanisms allowing certain bacterial clones to prevail in this nutrient-poor habitat have hardly been studied. Of 89 nasal Staphylococcus isolates, unexpectedly, the vast majority (84% was found to produce antimicrobial substances in particular under habitat-specific stress conditions, such as iron limitation or exposure to hydrogen peroxide. Activity spectra were generally narrow but highly variable with activities against certain nasal members of the Actinobacteria, Proteobacteria, Firmicutes, or several groups of bacteria. Staphylococcus species and many other Firmicutes were insusceptible to most of the compounds. A representative bacteriocin was identified as a nukacin-related peptide whose inactivation reduced the capacity of the producer Staphylococcus epidermidis IVK45 to limit growth of other nasal bacteria. Of note, the bacteriocin genes were found on mobile genetic elements exhibiting signs of extensive horizontal gene transfer and rearrangements. Thus, continuously evolving bacteriocins appear to govern bacterial competition in the human nose and specific bacteriocins may become important agents for eradication of notorious opportunistic pathogens from human microbiota.

  9. Spontaneous high piezoelectricity in poly(vinylidene fluoride) nanoribbons produced by iterative thermal size reduction technique.

    Science.gov (United States)

    Kanik, Mehmet; Aktas, Ozan; Sen, Huseyin Sener; Durgun, Engin; Bayindir, Mehmet

    2014-09-23

    We produced kilometer-long, endlessly parallel, spontaneously piezoelectric and thermally stable poly(vinylidene fluoride) (PVDF) micro- and nanoribbons using iterative size reduction technique based on thermal fiber drawing. Because of high stress and temperature used in thermal drawing process, we obtained spontaneously polar γ phase PVDF micro- and nanoribbons without electrical poling process. On the basis of X-ray diffraction (XRD) analysis, we observed that PVDF micro- and nanoribbons are thermally stable and conserve the polar γ phase even after being exposed to heat treatment above the melting point of PVDF. Phase transition mechanism is investigated and explained using ab initio calculations. We measured an average effective piezoelectric constant as -58.5 pm/V from a single PVDF nanoribbon using a piezo evaluation system along with an atomic force microscope. PVDF nanoribbons are promising structures for constructing devices such as highly efficient energy generators, large area pressure sensors, artificial muscle and skin, due to the unique geometry and extended lengths, high polar phase content, high thermal stability and high piezoelectric coefficient. We demonstrated two proof of principle devices for energy harvesting and sensing applications with a 60 V open circuit peak voltage and 10 μA peak short-circuit current output.

  10. A rapid enzymatic assay for high-throughput screening of adenosine-producing strains

    Science.gov (United States)

    Dong, Huina; Zu, Xin; Zheng, Ping; Zhang, Dawei

    2015-01-01

    Adenosine is a major local regulator of tissue function and industrially useful as precursor for the production of medicinal nucleoside substances. High-throughput screening of adenosine overproducers is important for industrial microorganism breeding. An enzymatic assay of adenosine was developed by combined adenosine deaminase (ADA) with indophenol method. The ADA catalyzes the cleavage of adenosine to inosine and NH3, the latter can be accurately determined by indophenol method. The assay system was optimized to deliver a good performance and could tolerate the addition of inorganic salts and many nutrition components to the assay mixtures. Adenosine could be accurately determined by this assay using 96-well microplates. Spike and recovery tests showed that this assay can accurately and reproducibly determine increases in adenosine in fermentation broth without any pretreatment to remove proteins and potentially interfering low-molecular-weight molecules. This assay was also applied to high-throughput screening for high adenosine-producing strains. The high selectivity and accuracy of the ADA assay provides rapid and high-throughput analysis of adenosine in large numbers of samples. PMID:25580842

  11. Commensal E. coli Stx2 lysogens produce high levels of phages after spontaneous prophage induction

    Directory of Open Access Journals (Sweden)

    Hildegunn eIversen

    2015-02-01

    Full Text Available Enterohemorrhagic E. coli (EHEC is a food-borne pathogen that causes disease ranging from uncomplicated diarrhea to life-threatening hemolytic uremic syndrome (HUS and nervous system complications. Shiga toxin 2 (Stx2 is the major virulence factor of EHEC and is critical for development of HUS. The genes encoding Stx2 are carried by lambdoid bacteriophages and the toxin production is tightly linked to the production of phages during lytic cycle. It has previously been suggested that commensal E. coli could amplify the production of Stx2-phages and contribute to the severity of disease. In this study we examined the susceptibility of commensal E. coli strains to the Stx2-converting phage ϕ734, isolated from a highly virulent EHEC O103:H25 (NIPH-11060424. Among 38 commensal E. coli strains from healthy children below five years, 15 were lysogenized by the ϕ734 phage, whereas lytic infection was not observed. Three of the commensal E. coli ϕ734 lysogens were tested for stability, and appeared stable and retained the phage for at least 10 cultural passages. When induced to enter lytic cycle by H2O2 treatment, 8 out of 13 commensal lysogens produced more ϕ734 phages than NIPH-11060424. Strikingly, five of them even spontaneously (non-induced produced higher levels of phage than the H2O2 induced NIPH-11060424. An especially high frequency of HUS (60% was seen among children infected by NIPH-11060424 during the outbreak in 2006. Based on our findings, a high Stx2 production by commensal E. coli lysogens cannot be ruled out as a contributor to the high frequency of HUS during this outbreak.

  12. Nanometer-size surface modification produced by single, low energy, highly charged ions

    International Nuclear Information System (INIS)

    Stockli, M.P.

    1994-01-01

    Atomically flat surfaces of insulators have been bombarded with low energy, highly charged ions to search for nanometer-size surface modifications. It is expected that the high electron deficiency of highly charged ions will capture and/or remove many of the insulator's localized electrons when impacting on an insulating surface. The resulting local electron deficiency is expected to locally disintegrate the insulator through a open-quotes Coulomb explosionclose quotes forming nanometer-size craters. Xe ions with charge states between 10+ and 45+ and kinetic energies between 0 and 10 keV/q were obtained from the KSU-CRYEBIS, a CRYogenic Electron Beam Ion Source and directed onto various insulating materials. Mica was favored as target material as atomically flat surfaces can be obtained reliably through cleaving. However, the authors observations with an atomic force microscope have shown that mica tends to defoliate locally rather than disintegrate, most likely due to the small binding forces between adjacent layers. So far the authors measurements indicate that each ion produces one blister if the charge state is sufficiently high. The blistering does not seem to depend very much on the kinetic energy of the ions

  13. Optimization of HNA etching parameters to produce high aspect ratio solid silicon microneedles

    International Nuclear Information System (INIS)

    Hamzah, A A; Yeop Majlis, B; Yunas, J; Dee, C F; Abd Aziz, N; Bais, B

    2012-01-01

    High aspect ratio solid silicon microneedles with a concave conic shape were fabricated. Hydrofluoric acid–nitric acid–acetic acid (HNA) etching parameters were characterized and optimized to produce microneedles that have long and narrow bodies with smooth surfaces, suitable for transdermal drug delivery applications. The etching parameters were characterized by varying the HNA composition, the optical mask's window size, the etching temperature and bath agitation. An L9 orthogonal Taguchi experiment with three factors, each having three levels, was utilized to determine the optimal fabrication parameters. Isoetch contours for HNA composition with 0% and 10% acetic acid concentrations were presented and a high nitric acid region was identified to produce microneedles with smooth surfaces. It is observed that an increase in window size indiscriminately increases the etch rate in both the vertical and lateral directions, while an increase in etching temperature beyond 35 °C causes the etching to become rapid and uncontrollable. Bath agitation and sample placement could be manipulated to achieve a higher vertical etch rate compared to its lateral counterpart in order to construct high aspect ratio microneedles. The Taguchi experiment performed suggests that a HNA composition of 2:7:1 (HF:HNO 3 :CH 3 COOH), window size of 500 µm and agitation rate of 450 RPM are optimal. Solid silicon microneedles with an average height of 159.4 µm, an average base width of 110.9 µm, an aspect ratio of 1.44, and a tip angle and diameter of 19.2° and 0.38 µm respectively were successfully fabricated. (paper)

  14. Electro-spray of high viscous liquids for producing mono-sized spherical alginate beads

    Institute of Scientific and Technical Information of China (English)

    Hamid Moghadam; Mohsen Samimi; Abdolreza Samimi; Mohamad Khorram

    2008-01-01

    Alginate beads, often used for controlled release of enzymes and drugs, are usually produced by spraying sodium alginate liquid into a gelling agent using mechanical vibration nozzle or air jet. In this work an alternative method of electro-spray was employed to form droplets with desired size from a highly viscous sodium alginate solution using constant DC voltage. The droplets were then cured in a calcium chloride solution. The main objective was to produce mono-sized beads from such a highly viscous and non-Newtonian liquid (1000-5000 mPa s). The effects of nozzle diameter, flow rate and concentration of liquid on the size of the beads were investigated. Among the parameters studied, voltage had a pronounced effect on the size of beads as compared to flow rate zzle diameter and concentration of alginate liquid. The size of beads was reduced to a minimum value with increasing the voltage in the range of 0-10 kV. At the early stages of voltage increase (I.e. Up to about 4 kV), the rate of size reduction was relatively low, while the dripping mode dominated. However, in the middle part of the range of applied voltage, where the rate of size reduction was high (I.e. About 4-7 kV), an unstable transition occurred between dripping and jetting. At the end part of the range (I.e. 7-10 kV) jet mode of spray was observed. Increasing the height of fall of the droplets was found to improve the sphericity of the beads, because of the increased time of flight for the droplets. This was especially identifiable at higher concentrations of the alginate liquid (I.e. 3 w/v%)

  15. Comparative Proteome Analysis between High Lipid-Producing Strain Mucor circinelloides WJ11 and Low Lipid-Producing Strain CBS 277.49.

    Science.gov (United States)

    Tang, Xin; Chen, Haiqin; Gu, Zhennan; Zhang, Hao; Chen, Yong Q; Song, Yuanda; Chen, Wei

    2017-06-21

    Mucor circinelloides is one of few oleaginous fungi that produces a useful oil rich in γ-linolenic acid, but it usually only produces <25% total lipid. Nevertheless, we isolated a new strain WJ11 that can produce up to 36% lipid of cell dry weight. In this study, we have systematically analyzed the global changes in protein levels between the high lipid-producing strain WJ11 and the low lipid-producing strain CBS 277.49 (15%, lipid/cell dry weight) at lipid accumulation phase through comparative proteome analysis. Proteome analysis demonstrated that the branched-chain amino acid and lysine metabolism, glycolytic pathway, and pentose phosphate pathway in WJ11 were up-regulated, while the activities of tricarboxylic acid cycle and branch point enzyme for synthesis of isoprenoids were retarded compared with CBS 277.49. The coordinated regulation at proteome level indicate that more acetyl-CoA and NADPH are provided for fatty acid biosynthesis in WJ11 compared with CBS 277.49.

  16. The relationship between serum adiponectin and postpartum luteal activity in high-producing dairy cows.

    Science.gov (United States)

    Kafi, Mojtaba; Tamadon, Amin; Saeb, Mehdi

    2015-05-01

    The aims of the present study were to initially determine the pattern of serum adiponectin concentrations during a normal estrous cycle in high-producing postpartum dairy cows and then evaluate the relationship between the serum concentrations of adiponectin and insulin with the commencement of postpartum luteal activity and ovarian activities in clinically healthy high-producing Holstein dairy cows. During a normal estrous cycle of cows (n = 6), serum adiponectin concentrations gradually decreased (P Cows with higher peak of milk yield had lower serum adiponectin concentrations by week 7 postpartum (P = 0.01). Serum adiponectin and insulin concentrations in cows with different postpartum luteal activity (based on the progesterone profile) were evaluated using the following class of cows: normal (≤45 days, n = 11) and delayed (>45 days, n = 11) commencement of luteal activity (C-LA) and four different profiles of normal luteal activity (NLA, n = 5), prolonged luteal phase (n = 6), delayed first ovulation (n = 6), and anovulation (AOV, n = 5). Serum adiponectin concentrations decreased gradually by week 3 postpartum in NLA and then increased; whereas in AOV and delayed first ovulation, they were decreased after week 3 postpartum (P cows was more than that of NLA cows. Insulin concentrations were almost maintained at a stable level in NLA cows (P > 0.05), whereas they increased in the other groups (P cows with C-LA greater than 45 days decreased more than those with C-LA 45 days or less after week 3 postpartum (P = 0.002). Serum adiponectin concentrations at week 7 postpartum were lower in delayed C-LA (P = 0.01). Milk yield in cows with C-LA greater than 45 days increased more than cows with C-LA 45 days or less postpartum (P = 0.002). Insulin concentrations increased relatively in parallel from weeks 1 to 7 postpartum in cows either with C-LA greater than 45 or with C-LA 45 days or less. We showed for the first time the profile of serum adiponectin concentrations

  17. Characterization of the fast electrons distribution produced in a high intensity laser target interaction

    Energy Technology Data Exchange (ETDEWEB)

    Westover, B. [Department of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, California 92093 (United States); Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Chen, C. D.; Patel, P. K.; McLean, H. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States); Beg, F. N., E-mail: fbeg@ucsd.edu [Department of Mechanical and Aerospace Engineering, University of California San Diego, La Jolla, California 92093 (United States)

    2014-03-15

    Experiments on the Titan laser (∼150 J, 0.7 ps, 2 × 10{sup 20} W cm{sup −2}) at the Lawrence Livermore National Laboratory were carried out in order to study the properties of fast electrons produced by high-intensity, short pulse laser interacting with matter under conditions relevant to Fast Ignition. Bremsstrahlung x-rays produced by these fast electrons were measured by a set of compact filter-stack based x-ray detectors placed at three angles with respect to the target. The measured bremsstrahlung signal allows a characterization of the fast electron beam spectrum, conversion efficiency of laser energy into fast electron kinetic energy and angular distribution. A Monte Carlo code Integrated Tiger Series was used to model the bremsstrahlung signal and infer a laser to fast electron conversion efficiency of 30%, an electron slope temperature of about 2.2 MeV, and a mean divergence angle of 39°. Simulations were also performed with the hybrid transport code ZUMA which includes fields in the target. In this case, a conversion efficiency of laser energy to fast electron energy of 34% and a slope temperature between 1.5 MeV and 4 MeV depending on the angle between the target normal direction and the measuring spectrometer are found. The observed temperature of the bremsstrahlung spectrum, and therefore the inferred electron spectrum are found to be angle dependent.

  18. Temperature profile and producer gas composition of high temperature air gasification of oil palm fronds

    International Nuclear Information System (INIS)

    Guangul, F M; Sulaiman, S A; Ramli, A

    2013-01-01

    Environmental pollution and scarcity of reliable energy source are the current pressing global problems which need a sustainable solution. Conversion of biomass to a producer gas through gasification process is one option to alleviate the aforementioned problems. In the current research the temperature profile and composition of the producer gas obtained from the gasification of oil palm fronds by using high temperature air were investigated and compared with unheated air. By preheating the gasifying air at 500°C the process temperature were improved and as a result the concentration of combustible gases and performance of the process were improved. The volumetric percentage of CO, CH4 and H2 were improved from 22.49, 1.98, and 9.67% to 24.98, to 2.48% and 13.58%, respectively. In addition, HHV, carbon conversion efficiency and cold gas efficiency were improver from 4.88 MJ/Nm3, 83.8% and 56.1% to 5.90 MJ/Nm3, 87.3% and 62.4%, respectively.

  19. Producing a lycopene nanodispersion: Formulation development and the effects of high pressure homogenization.

    Science.gov (United States)

    Shariffa, Y N; Tan, T B; Uthumporn, U; Abas, F; Mirhosseini, H; Nehdi, I A; Wang, Y-H; Tan, C P

    2017-11-01

    The aim of this study was to develop formulations to produce lycopene nanodispersions and to investigate the effects of the homogenization pressure on the physicochemical properties of the lycopene nanodispersion. The samples were prepared by using emulsification-evaporation technique. The best formulation was achieved by dispersing an organic phase (0.3% w/v lycopene dissolved in dichloromethane) in an aqueous phase (0.3% w/v Tween 20 dissolved in deionized water) at a ratio of 1:9 by using homogenization process. The increased level of homogenization pressure to 500bar reduced the particle size and lycopene concentration significantly (phomogenization pressure (700-900bar) resulted in large particle sizes with high dispersibility. The zeta potential and turbidity of the lycopene nanodispersion were significantly influenced by the homogenization pressure. The results from this study provided useful information for producing small-sized lycopene nanodispersions with a narrow PDI and good stability for application in beverage products. Copyright © 2017 Elsevier Ltd. All rights reserved.

  20. Generation of high-yield insulin producing cells from human bone marrow mesenchymal stem cells.

    Science.gov (United States)

    Jafarian, Arefeh; Taghikhani, Mohammad; Abroun, Saeid; Pourpak, Zahra; Allahverdi, Amir; Soleimani, Masoud

    2014-07-01

    Allogenic islet transplantation is a most efficient approach for treatment of diabetes mellitus. However, the scarcity of islets and long term need for an immunosuppressant limits its application. Recently, cell replacement therapies that generate of unlimited sources of β cells have been developed to overcome these limitations. In this study we have described a stage specific differentiation protocol for the generation of insulin producing islet-like clusters from human bone marrow mesenchymal stem cells (hBM-MSCs). This specific stepwise protocol induced differentiation of hMSCs into definitive endoderm, pancreatic endoderm and pancreatic endocrine cells that expressed of sox17, foxa2, pdx1, ngn3, nkx2.2, insulin, glucagon, somatostatin, pancreatic polypeptide, and glut2 transcripts respectively. In addition, immunocytochemical analysis confirmed protein expression of the above mentioned genes. Western blot analysis discriminated insulin from proinsulin in the final differentiated cells. In derived insulin producing cells (IPCs), secreted insulin and C-peptide was in a glucose dependent manner. We have developed a protocol that generates effective high-yield human IPCs from hBM-MSCs in vitro. These finding suggest that functional IPCs generated by this procedure can be used as a cell-based approach for insulin dependent diabetes mellitus.

  1. Bacteriocin-Producing Enterococcus faecium LCW 44: A High Potential Probiotic Candidate from Raw Camel Milk.

    Science.gov (United States)

    Vimont, Allison; Fernandez, Benoît; Hammami, Riadh; Ababsa, Ahlem; Daba, Hocine; Fliss, Ismaïl

    2017-01-01

    Bacterial isolates from raw camel milk were screened for antibacterial activity using the agar diffusion assay. Ten isolates selected for their inhibition of Gram-positive bacteria were identified by 16S sequencing as Enterococcus faecium or durans . An isolate named E. faecium LCW 44 exhibited the broadest antibacterial spectrum with an inhibitory activity against several Gram-positive strains belonging to the genera Clostridium , Listeria , Staphylococcus , and Lactobacillus. E. faecium LCW 44 was shown to produce N-formylated enterocins L50A and L50B, as revealed by mass spectrometry and PCR analyses. This isolate did not harbor any of the virulence factors tested and was shown to be sensitive to all tested antibiotics. It showed high resistance to gastric and intestinal conditions (78 ± 4% survival). Its adhesion index was evaluated at 176 ± 86 and 24 ± 86 on Caco-2 cells and HT-29 cells, respectively, and it significantly reduced adhesion of Listeria monocytogenes by 65 and 49%, respectively. In Macfarlane broth (simulating the nutrient content of the colon), counts of L. monocytogenes were reduced by 2 log 10 cycles after 24 h in co-culture with E. faecium LCW 44, compared to the increase of 4 log 10 cycles when cultured alone. Comparison with a bacteriocin-non-producing mutant of E. faecium LCW 44 strongly suggests that inhibition of L. monocytogenes was due to bacteriocin production. Altogether, E. faecium LCW 44 thus has potential for use as a probiotic for humans and veterinary medicine.

  2. High level compressive residual stresses produced in aluminum alloys by laser shock processing

    International Nuclear Information System (INIS)

    Gomez-Rosas, G.; Rubio-Gonzalez, C.; Ocana, J.L; Molpeceres, C.; Porro, J.A.; Chi-Moreno, W.; Morales, M.

    2005-01-01

    Laser shock processing (LSP) has been proposed as a competitive alternative technology to classical treatments for improving fatigue and wear resistance of metals. We present a configuration and results for metal surface treatments in underwater laser irradiation at 1064 nm. A convergent lens is used to deliver 1.2 J/cm 2 in a 8 ns laser FWHM pulse produced by 10 Hz Q-switched Nd:YAG, two laser spot diameters were used: 0.8 and 1.5 mm. Results using pulse densities of 2500 pulses/cm 2 in 6061-T6 aluminum samples and 5000 pulses/cm 2 in 2024 aluminum samples are presented. High level of compressive residual stresses are produced -1600 MPa for 6061-T6 Al alloy, and -1400 MPa for 2024 Al alloy. It has been shown that surface residual stress level is higher than that achieved by conventional shot peening and with greater depths. This method can be applied to surface treatment of final metal products

  3. Bacteriocin-Producing Enterococcus faecium LCW 44: A High Potential Probiotic Candidate from Raw Camel Milk

    Directory of Open Access Journals (Sweden)

    Allison Vimont

    2017-05-01

    Full Text Available Bacterial isolates from raw camel milk were screened for antibacterial activity using the agar diffusion assay. Ten isolates selected for their inhibition of Gram-positive bacteria were identified by 16S sequencing as Enterococcus faecium or durans. An isolate named E. faecium LCW 44 exhibited the broadest antibacterial spectrum with an inhibitory activity against several Gram-positive strains belonging to the genera Clostridium, Listeria, Staphylococcus, and Lactobacillus. E. faecium LCW 44 was shown to produce N-formylated enterocins L50A and L50B, as revealed by mass spectrometry and PCR analyses. This isolate did not harbor any of the virulence factors tested and was shown to be sensitive to all tested antibiotics. It showed high resistance to gastric and intestinal conditions (78 ± 4% survival. Its adhesion index was evaluated at 176 ± 86 and 24 ± 86 on Caco-2 cells and HT-29 cells, respectively, and it significantly reduced adhesion of Listeria monocytogenes by 65 and 49%, respectively. In Macfarlane broth (simulating the nutrient content of the colon, counts of L. monocytogenes were reduced by 2 log10 cycles after 24 h in co-culture with E. faecium LCW 44, compared to the increase of 4 log10 cycles when cultured alone. Comparison with a bacteriocin-non-producing mutant of E. faecium LCW 44 strongly suggests that inhibition of L. monocytogenes was due to bacteriocin production. Altogether, E. faecium LCW 44 thus has potential for use as a probiotic for humans and veterinary medicine.

  4. Final Technical Report: Magnetic Reconnection in High-Energy Laser-Produced Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Germaschewski, Kai [Univ. of New Hampshire, Durham, NH (United States); Fox, William [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States); Bhattacharjee, Amitava [Princeton Plasma Physics Lab. (PPPL), Princeton, NJ (United States)

    2017-04-06

    This report describes the final results from the DOE Grant DE-SC0007168, “Fast Magnetic Reconnection in HED Laser-Produced Plasmas.” The recent generation of laboratory high-energy-density physics facilities has opened significant physics opportunities for experimentally modeling astrophysical plasmas. The goal of this proposal is to use these new tools to study fundamental problems in plasma physics and plasma astrophysics. Fundamental topics in this area involve study of the generation, amplification, and fate of magnetic fields, which are observed to pervade the plasma universe and govern its evolution. This project combined experiments at DOE laser facilities with kinetic plasma simulation to study these processes. The primary original goal of the project was to study magnetic reconnection using a new experimental platform, colliding magnetized laser-produced plasmas. However through a series of fortuitous discoveries, the work broadened out to allow significant advancement on multiple topics in laboratory astrophysics, including magnetic reconnection, Weibel instability, and collisionless shocks.

  5. On some methods to produce high-energy polarized electron beams by means of proton synchrotrons

    International Nuclear Information System (INIS)

    Bessonov, E.G.; Vazdik, Ya.A.

    1980-01-01

    Some methods of production of high-energy polarized electron beams by means of proton synchrotrons are considered. These methods are based on transfer by protons of a part of their energy to the polarized electrons of a thin target placed inside the working volume of the synchrotron. It is suggested to use as a polarized electron target a magnetized crystalline iron in which proton channeling is realized, polarized atomic beams and the polarized plasma. It is shown that by this method one can produce polarized electron beams with energy approximately 100 GeV, energy spread +- 5 % and intensity approximately 10 7 electron/c, polarization approximately 30% and with intensity approximately 10 4 -10 5 electron/c, polarization approximately 100% [ru

  6. High-throughput detection of ethanol-producing cyanobacteria in a microdroplet platform.

    Science.gov (United States)

    Abalde-Cela, Sara; Gould, Anna; Liu, Xin; Kazamia, Elena; Smith, Alison G; Abell, Chris

    2015-05-06

    Ethanol production by microorganisms is an important renewable energy source. Most processes involve fermentation of sugars from plant feedstock, but there is increasing interest in direct ethanol production by photosynthetic organisms. To facilitate this, a high-throughput screening technique for the detection of ethanol is required. Here, a method for the quantitative detection of ethanol in a microdroplet-based platform is described that can be used for screening cyanobacterial strains to identify those with the highest ethanol productivity levels. The detection of ethanol by enzymatic assay was optimized both in bulk and in microdroplets. In parallel, the encapsulation of engineered ethanol-producing cyanobacteria in microdroplets and their growth dynamics in microdroplet reservoirs were demonstrated. The combination of modular microdroplet operations including droplet generation for cyanobacteria encapsulation, droplet re-injection and pico-injection, and laser-induced fluorescence, were used to create this new platform to screen genetically engineered strains of cyanobacteria with different levels of ethanol production.

  7. The screening of bacillus subtilis strain with high-produced antimicrobial substance using N+ ion implantation

    International Nuclear Information System (INIS)

    Shen Juan; Bie Xiaomei; Lu Zhaoxin; Lu Fengxia; Zhu Xiaoyu

    2006-01-01

    N + ion implantation was used to obtain higher-yield antimicrobial substance. Bacillus subtilis fmbJ was mutated by 25 keV N + ion implantation with the dose of 50 x 2.6 x 10 13 , 80 x 2.6 x 10 13 , 100 x 2.6 x 10 13 , 120 x 2.6 x 10 13 and 150 x 2.6 x 10 13 N + /m 2 . Results showed that the optimal N + ion dose was 50 x 2.6 x 10 13 N + /m 2 , and a strain of high-yield antimicrobials was obtained and named as Bacillus subtilis fmbJ224. Its antimicrobial substance yield was increased by 96% than the initial. The fermentation characteristic of the strain was studied, and the mode of producing antimicrobial substance for the selected strain was arrearage synthesis type. (authors)

  8. Observations of visual sensations produced by Cerenkov radiation from high-energy electrons

    International Nuclear Information System (INIS)

    Steidley, K.D.; Eastman, R.M.; Stabile, R.J.

    1989-01-01

    Ten cancer patients whose eyes were therapeutically irradiated with 6-18 MeV electrons reported visual light sensations. Nine reported seeing blue light and one reported seeing white light. Controls reported seeing no light. Additionally, tests with patients ruled out the x-ray contamination of the electron beam as being important. The photon yield due to Cerenkov radiation produced by radium and its daughters for both electrons and gamma rays was calculated; it was found to account for a turn-of-the-century human observation of the radium phosphene. We conclude that the dominant mechanism of this phosphene is Cerenkov radiation, primarily from betas. From our own patient data, based on the color seen and the Cerenkov production rates, we conclude that the dominant mechanism is Cerenkov radiation and that high-energy electrons are an example of particle induced visual sensations

  9. Spatial patterns of soil organic carbon stocks in Estonian arable soils

    Science.gov (United States)

    Suuster, Elsa; Astover, Alar; Kõlli, Raimo; Roostalu, Hugo; Reintam, Endla; Penu, Priit

    2010-05-01

    Soil organic carbon (SOC) determines ecosystem functions, influencing soil fertility, soil physical, chemical and biological properties and crop productivity. Therefore the spatial pattern of SOC stocks and its appropriate management is important at various scales. Due to climate change and the contribution of carbon store in the soils, the national estimates of soil carbon stocks should be determined. Estonian soils have been well studied and mapped at a scale 1:10,000. Previous studies have estimated SOC stocks based on combinations of large groups of Estonian soils and the mean values of the soil profile database, but were not embedded into the geo-referenced databases. These studies have estimated SOC stocks of Estonian arable soils 122.3 Tg. Despite of available soil maps and databases, this information is still very poorly used for spatial soil modelling. The aim of current study is to assess and model spatial pattern of SOC stocks of arable soils on a pilot area Tartu County (area 3089 sq km). Estonian digital soil map and soil monitoring databases are providing a good opportunity to assess SOC stocks at various scales. The qualitative nature of the initial data from a soil map prohibits any straightforward use in modelling. Thus we have used several databases to construct models and linkages between soil properties that can be integrated into soil map. First step was to reorganize the soil map database (44,046 mapping units) so it can be used as an input to modelling. Arable areas were distinguished by a field layer of Agricultural Registers and Information Board, which provides precise information of current land use as it is the basis of paying CAP subsidies. The estimates of SOC content were found by using the arable land evaluation database of Tartu from the Estonian Land Board (comprising 950 sq km and 31,226 fields), where each soil type was assessed separately and average SOC content grouped by texture was derived. SOC content of epipedon varies in

  10. Proposed method to produce a highly polarized e+ beam for future linear colliders

    International Nuclear Information System (INIS)

    Okugi, Toshiyuki; Chiba, Masami; Kurihara, Yoshimasa

    1996-01-01

    We propose a method to produce a spin-polarized e + beam using e + e - pair-creation by circularly polarized photons. Assuming Compton scattering of an unpolarized e - beam and circularly polarized laser light, scattered γ-rays at the high end of the energy spectrum are also circularly polarized. If those γ-rays are utilized to create e ± pairs on a thin target, the spin-polarization is preserved for e + 's at the high end of their energy spectrum. By using the injector linac of Accelerator Test Facility at KEK and a commercially available Nd:YAG pulse laser, we can expect about 10 5 polarized e + 's per second with a degree of polarization of 80% and a kinetic energy of 35-80 MeV. The apparatus for creation and measurement of polarized e + 's is being constructed. We present new idea for possible application of our method to future linear colliders by utilizing a high-power CO 2 laser. (author)

  11. Vital signs : no end in sight to high revenues for producers (and headaches for consumers)

    International Nuclear Information System (INIS)

    Lunan, D.

    2001-01-01

    Prices for petroleum products in North America have been on a roller coaster ride for a while now, with prices remaining high for the normally more dormant summer season. Although it is beneficial to producers, consumers are not as happy about the situation. Refinery problems, growing demand and product proliferation have combined to create this situation. Refineries on the East Coast of the United States were forced to extend the required maintenance period in the spring since they had been running non-stop to meet the requirements of last winter. Canadian refiners benefited from the situation. They enjoy strong refining margins. Canadian refined-product exports jumped 22 per cent higher in February of 2001 when compared to February 2000. Heavy fuel oil exports in January and February were especially strong, as the industrial boilers in the United States were feeling the effects of the very high natural gas prices. A similar phenomenon was reflected in exports of gasoline and crude oil. The commissioning last year of the Alliance Pipeline and successful exploration programs in British Columbia ensured it led the pack. The crude production in Saskatchewan was up 11.4 per cent due to the widespread horizontal drilling and recovery programs. To ensure adequate winter peaking supplies, storage injections are lagging behind, which tends to indicate that gas prices will remain high for the remainder of the year. 7 tabs., 4 figs

  12. Rheological Behavior of Tomato Fiber Suspensions Produced by High Shear and High Pressure Homogenization and Their Application in Tomato Products

    Science.gov (United States)

    Sun, Ping; Adhikari, Benu P.; Li, Dong

    2018-01-01

    This study investigated the effects of high shear and high pressure homogenization on the rheological properties (steady shear viscosity, storage and loss modulus, and deformation) and homogeneity in tomato fiber suspensions. The tomato fiber suspensions at different concentrations (0.1%–1%, w/w) were subjected to high shear and high pressure homogenization and the morphology (distribution of fiber particles), rheological properties, and color parameters of the homogenized suspensions were measured. The homogenized suspensions were significantly more uniform compared to unhomogenized suspension. The homogenized suspensions were found to better resist the deformation caused by external stress (creep behavior). The apparent viscosity and storage and loss modulus of homogenized tomato fiber suspension are comparable with those of commercial tomato ketchup even at the fiber concentration as low as 0.5% (w/w), implying the possibility of using tomato fiber as thickener. The model tomato sauce produced using tomato fiber showed desirable consistency and color. These results indicate that the application of tomato fiber in tomato-based food products would be desirable and beneficial. PMID:29743890

  13. Trends in smoking behaviour among Estonian physicians in 1982-2014.

    Science.gov (United States)

    Pärna, Kersti; Põld, Mariliis; Ringmets, Inge

    2017-07-25

    Smoking surveys among physicians have proved useful in highlighting the importance of physicians as healthy life style exemplars and role models in tobacco control and smoking cessation. The aim of this study was to give an overview of smoking behaviour among Estonian physicians from 1982 to 2014. Three cross-sectional postal surveys using a self-administered questionnaire were carried out among all practising physicians in Estonia. The number of physicians participating in this study was 3786 in 1982, 2735 in 2002, and 2902 in 2014. Data analysis involved calculating the age-standardized prevalences of smoking, prevalences of smoking by age group and mean age of smoking initiation. A non-parametric test for trend was used to assess significant changes in smoking over time. Age-standardized prevalence of current smoking among men was 39.7% in 1982, 20.9% in 2002, and 14.3% in 2014 and among women 12.2%, 8.0%, and 5.2%, respectively (p smoking among men and women was in age groups under 35 (from 55.2% to 16.7% and from 16.7% to 2.8%, respectively) and 35-44 (from 47.1% to 8.3% and from 19.5% to 5.1%, respectively) (p smoking initiation decreased from 20.4 to 19.3 among men and from 24.5 to 20.4 among women over the study period. In 1982-2014, smoking prevalence among Estonian physicians declined substantially. This may influence the willingness of society to recognize the health consequences of smoking which could give a support to the decline of the smoking epidemic in the country. Differences between smoking among male and female physicians persisted over the study period, but mean age of smoking initiation decreased. A further decline in smoking among Estonian physicians should be encouraged by special efforts targeted at physicians.

  14. The treatment of lexical collocations in EFL coursebooks in the Estonian secondary school context

    Directory of Open Access Journals (Sweden)

    Liina Vassiljev

    2015-04-01

    Full Text Available The article investigates lexical collocations encountered in English as a Foreign Language (EFL instruction in Estonian upper secondary schools. This is achieved through a statistical analysis of collocations featuring in three coursebooks where the collocations found are analysed in terms of their type, frequency and usefulness index by studying them through an online language corpus (Collins Wordbanks Online. The coursebooks are systematically compared and contrasted relying upon the data gathered. The results of the study reveal that the frequency and range of lexical collocations in a language corpus have not been regarded as an essential criterion for their selection and practice by any of the coursebook authors under discussion.

  15. Estonian experience in establishing the national radiation protection infrastructure in the newly independent State

    International Nuclear Information System (INIS)

    Kalam, J.

    2001-01-01

    The Estonian Radiation Protection Centre (ERPC) was established on 4 January 1996 as the regulatory authority for radiation protection and safety of radiation sources. The report explains the ERPC's structure and its main functions and activities, and provides information on the regulations that have been approved or are planned to be adopted. Reference is made to radiological emergency preparedness and, in particular, to the status of development of the system of regulatory control by authorization and inspection of radiation practices in the country. (author)

  16. Selenium bioavailability from naturally produced high-selenium peas and oats in selenium-deficient rats.

    Science.gov (United States)

    Yan, Lin; Johnson, LuAnn K

    2011-06-08

    This study determined the bioavailability of selenium (Se) from yellow peas and oats harvested from the high-Se soil of South Dakota, United States. The Se concentrations were 13.5 ± 0.2 and 2.5 ± 0.1 mg/kg (dry weight) for peas and oats, respectively. Male weanling Sprague-Dawley rats were depleted of Se by feeding them a 30% Torula yeast-based diet (4.1 μg Se/kg) for 56 days, and then they were replenished with Se for an additional 50 days by feeding them the same diet supplemented with 20, 30, or 40 μg Se/kg from peas or oats, respectively. Selenium bioavailability was determined on the basis of the restoration of Se-dependent enzyme activities and tissue Se concentrations in Se-depleted rats, comparing those responses for yellow peas and oats to those for l-selenomethionine (SeMet; used as a reference) by using a slope-ratio method. Dietary supplementation with peas or oats resulted in linear or log-linear, dose-dependent increases in glutathione peroxidase activities in blood and liver and in thioredoxin reductase activity in liver. Supplementation with peas or oats resulted in linear or log-linear, dose-dependent increases in Se concentrations of plasma, liver, gastrocnemius muscle, and kidneys. The overall bioavailability was approximately 88% for Se from yellow peas and 92% from oats, compared to SeMet. It was concluded that Se from naturally produced high-Se yellow peas or oats is highly bioavailable in this model and that these high-Se foods may be a good dietary source of Se.

  17. Investing in Cognac Producing Vineyards to Hedge Wealth While Receiving High Returns

    Directory of Open Access Journals (Sweden)

    Hakob Hakobyan

    2015-07-01

    Full Text Available The general trend over the last decade for investments has been moving towards emerging markets, where investors are promised high returns for risky investments. These kind of investments favor the brave and bold, but are frightening for the risk averse. In this paper I will be presenting the opportunities that an investment into cognac producing vineyards can offer. High return and relatively low risk investment opportunities that exists in France. Included in the paper will be examples of large investments made recently into the industry. I will analyze the trends in the market over the past 8 years for the prices of land, cognac itself and the ease of sales of such products. There will also be an in-depth explanation of why cognac is today’s least risky product to invest into, comparing it to the Champagne regions’ similar historic trends. The findings show that land prices have increased at an average of 10% while simultaneously the price of cognac, has grow at an average of 14%. This product also has a unique hedging opportunity for investors. In short, excluding the growth of cognac prices in general the product itself gains value the longer it is stored, by an average of 12%. In this industry there are 5 big players that compete with each other on quality and also access to future stocks. This reality gives an investor the unique ability to sign futures contracts for 100% of their production over a 5 year period (standard market contract. Similar contracts can be signed with cooperatives who manage the lands for the investor, making the investment hassle free. This allows for an assured projection of both costs and returns for an unprecedented length of time compared to any other industry today. In conclusion, cognac producing vineyards are an investment that can potentially bring high returns, while being able to hedge the investment and see capital gains over the course of time. There will be a final simulation of a 5 year

  18. Monte Carlo simulation for neutron yield produced by bombarding thick targets with high energy heavy ions

    Energy Technology Data Exchange (ETDEWEB)

    Oranj, Leila Mokhtari; Oh, Joo Hee; Yoon, Moo Hyun; Lee, Hee Seock [POSTECH, Pohang (Korea, Republic of)

    2013-04-15

    One of radiation shielding issues at heavy-ion accelerator facilities is to estimate neutron production by primary heavy ions. A few Monte Carlo transport codes such as FLUKA and PHITS can work with primary heavy ions. Recently IBS/RISP((Rare Isotope Science Project) started to design a high-energy, high-power rare isotope accelerator complex for nuclear physics, medical and material science and applications. There is a lack of experimental and simulated data about the interaction of major beam, {sup 238}U with materials. For the shielding design of the end of first accelerating section section, we calculate a differential neutron yield using the FLUKA code for the interaction of 18.5 MeV/u uranium ion beam with thin carbon stripper of 1.3 μm). The benchmarking studies were also done to prove the yield calculation for 400 MeV/n {sup 131}Xe and other heavy ions. In this study, the benchmarking for Xe-C, Xe-Cu, Xe-Al, Xe-Pb and U-C, other interactions were performed using the FLUKA code. All of results show that the FLUKA can evaluate the heavy ion induced reaction with good uncertainty. For the evaluation of neutron source term, the calculated neutron yields are shown in Fig. 2. The energy of Uranium ion beam is only 18.5 MeV/u, but the energy of produced secondary neutrons was extended over 100 MeV. So the neutron shielding and the damage by those neutrons is expected to be serious. Because of thin stripper, the neutron intensity at forward direction was high. But the the intensity of produced secondary photons was relatively low and mostly the angular property was isotropic. For the detail shielding design of stripper section of RISP rare istope accelerator, the benchmarking study and preliminary evaluation of neutron source term from uranium beam have been carried out using the FLUKA code. This study is also compared with the evaluation results using the PHITS code performed coincidently. Both studies shows that two monte carlo codes can give a good results for

  19. Statistical analysis of solid lipid nanoparticles produced by high-pressure homogenization: a practical prediction approach

    Energy Technology Data Exchange (ETDEWEB)

    Duran-Lobato, Matilde, E-mail: mduran@us.es [Universidad de Sevilla, Dpto. Farmacia y Tecnologia Farmaceutica, Facultad de Farmacia (Espana) (Spain); Enguix-Gonzalez, Alicia [Universidad de Sevilla, Dpto. Estadistica e Investigacion Operativa, Facultad de Matematicas (Espana) (Spain); Fernandez-Arevalo, Mercedes; Martin-Banderas, Lucia [Universidad de Sevilla, Dpto. Farmacia y Tecnologia Farmaceutica, Facultad de Farmacia (Espana) (Spain)

    2013-02-15

    Lipid nanoparticles (LNPs) are a promising carrier for all administration routes due to their safety, small size, and high loading of lipophilic compounds. Among the LNP production techniques, the easy scale-up, lack of organic solvents, and short production times of the high-pressure homogenization technique (HPH) make this method stand out. In this study, a statistical analysis was applied to the production of LNP by HPH. Spherical LNPs with mean size ranging from 65 nm to 11.623 {mu}m, negative zeta potential under -30 mV, and smooth surface were produced. Manageable equations based on commonly used parameters in the pharmaceutical field were obtained. The lipid to emulsifier ratio (R{sub L/S}) was proved to statistically explain the influence of oil phase and surfactant concentration on final nanoparticles size. Besides, the homogenization pressure was found to ultimately determine LNP size for a given R{sub L/S}, while the number of passes applied mainly determined polydispersion. {alpha}-Tocopherol was used as a model drug to illustrate release properties of LNP as a function of particle size, which was optimized by the regression models. This study is intended as a first step to optimize production conditions prior to LNP production at both laboratory and industrial scale from an eminently practical approach, based on parameters extensively used in formulation.

  20. Effect of osmotic dehydration and vacuum-frying parameters to produce high-quality mango chips.

    Science.gov (United States)

    Nunes, Yolanda; Moreira, Rosana G

    2009-09-01

    Mango (Mangifera indica L.) is a fruit rich in flavor and nutritional values, which is an excellent candidate for producing chips. The objective of this study was to develop high-quality mango chips using vacuum frying. Mango ("Tommy Atkins") slices were pretreated with different maltodextrin concentrations (40, 50, and 65, w/v), osmotic dehydration times (45, 60, and 70 min), and solution temperatures (22 and 40 degrees C). Pretreated slices were vacuum fried at 120, 130, and 138 degrees C and product quality attributes (oil content, texture, color, carotenoid content) determined. The effect of frying temperatures at optimum osmotic dehydration times (65 [w/v] at 40 degrees C) was assessed. All samples were acceptable (scores > 5) to consumer panelists. The best mango chips were those pretreated with 65 (w/v) concentration for 60 min and vacuum fried at 120 degrees C. Mango chips under atmospheric frying had less carotenoid retention (32%) than those under vacuum frying (up to 65%). These results may help further optimize vacuum-frying processing of high-quality fruit-based snacks.

  1. Precipitation characteristic of high strength steels microalloyed with titanium produced by compact strip production

    Institute of Scientific and Technical Information of China (English)

    Jian Zhou; Yonglin Kang; Xinping Mao

    2008-01-01

    Transmission electron microscopy (TEM) and physics-chemical phase analysis were employed to investigate the precipitates in high strength steels microalloyed with Ti produced by compact strip production (CSP). It was seen that precipitates in Ti mieroalloyed steels mainly included TiN, Ti4C2S2, and TiC. The size of TiN particles varied from 50 to 500 nm, and they could precipitate during or before soaking. The Ti4C2S>2 with the size of 40-100 nm might precipitate before rolling, and the TiC particles with the size of 5-50 nm precipitated heterogeneously. High Ti content would lead to the presence of bigger TiC particles that precipitated in austenite, and by contrast, TiC particles that precipitated in ferrite and the transformation of austenite to ferrite was smaller. They were less than 30 nm and mainly responsible for precipitate strengthening. It should be noted that the TiC particles in higher Ti content were generally smaller than those in the steel with a lower Ti content.

  2. Cyanobacteria produce a high variety of hepatotoxic peptides in lichen symbiosis

    Science.gov (United States)

    Kaasalainen, Ulla; Fewer, David P.; Jokela, Jouni; Wahlsten, Matti; Sivonen, Kaarina; Rikkinen, Jouko

    2012-01-01

    Lichens are symbiotic associations between fungi and photosynthetic algae or cyanobacteria. Microcystins are potent toxins that are responsible for the poisoning of both humans and animals. These toxins are mainly associated with aquatic cyanobacterial blooms, but here we show that the cyanobacterial symbionts of terrestrial lichens from all over the world commonly produce microcystins. We screened 803 lichen specimens from five different continents for cyanobacterial toxins by amplifying a part of the gene cluster encoding the enzyme complex responsible for microcystin production and detecting toxins directly from lichen thalli. We found either the biosynthetic genes for making microcystins or the toxin itself in 12% of all analyzed lichen specimens. A plethora of different microcystins was found with over 50 chemical variants, and many of the variants detected have only rarely been reported from free-living cyanobacteria. In addition, high amounts of nodularin, up to 60 μg g−1, were detected from some lichen thalli. This microcystin analog and potent hepatotoxin has previously been known only from the aquatic bloom-forming genus Nodularia. Our results demonstrate that the production of cyanobacterial hepatotoxins in lichen symbiosis is a global phenomenon and occurs in many different lichen lineages. The very high genetic diversity of the mcyE gene and the chemical diversity of microcystins suggest that lichen symbioses may have been an important environment for diversification of these cyanobacteria. PMID:22451908

  3. Coupled-Multiplier Accelerator Produces High-Power Electron Beams for Industrial Applications

    International Nuclear Information System (INIS)

    Hatridge, M.; McIntyre, P.; Roberson, S.; Sattarov, A.; Thomas, E.; Meitzler, Charles

    2003-01-01

    The coupled multiplier is a new approach to efficient generation of MeV d.c. power for accelerator applications. High voltage is produced by a series of modules, each of which consists of a high-power alternator, step-up transformer, and 3-phase multiplier circuit. The alternators are connected mechanically along a rotating shaft, and connected by insulating flexible couplers. This approach differs from all previous d.c. technologies in that power is delivered to the various stages of the system mechanically, rather than through capacitive or inductive electrical coupling. For this reason the capital cost depends linearly on required voltage and power, rather than quadratically as with conventional technologies. The CM technology enables multiple electron beams to be driven within a common supply and insulating housing. MeV electron beam is extremely effective in decomposing organic contaminants in water. A 1 MeV, 100 kW industrial accelerator using the CM technology has been built and is being installed for treatment of wastewater at a petrochemical plant

  4. Structural and dielectric properties of barium strontium titanate produced by high temperature hydrothermal method

    International Nuclear Information System (INIS)

    Razak, K.A.; Asadov, A.; Yoo, J.; Haemmerle, E.; Gao, W.

    2008-01-01

    The preparation procedure, structural and dielectric properties of hydrothermally derived Ba x Sr 1-x TiO 3 (BST) were studied. BST with initial Ba compositions of 75, 80, 85 and 90 mol.% were prepared by a high temperature hydrothermal synthesis. The obtained powders were pressed into pellet, cold isostatically pressed and sintered at 1200 deg. C for 3 hours. The phase compositions and lattice parameters of the as prepared powders and sintered samples were analysed using X-ray diffractometry. A fitting software was used to analyse the XRD spectra to separate different phases. It was found that BST powder produced by the high temperature hydrothermal possessed a two-phase structure. This structure became more homogeneous during sintering due to interdiffusion but a small amount of minor phase can still be traced. Samples underwent an abnormal grain growth, whereby some grains grow faster than the other due to the presence of two-phase structure. The grain size increased with increasing Ba amount. Dielectric constant and polarisation increased with increasing Ba content but it was also affected by the electronic state and grain size of the compositions

  5. Statistical analysis of solid lipid nanoparticles produced by high-pressure homogenization: a practical prediction approach

    International Nuclear Information System (INIS)

    Durán-Lobato, Matilde; Enguix-González, Alicia; Fernández-Arévalo, Mercedes; Martín-Banderas, Lucía

    2013-01-01

    Lipid nanoparticles (LNPs) are a promising carrier for all administration routes due to their safety, small size, and high loading of lipophilic compounds. Among the LNP production techniques, the easy scale-up, lack of organic solvents, and short production times of the high-pressure homogenization technique (HPH) make this method stand out. In this study, a statistical analysis was applied to the production of LNP by HPH. Spherical LNPs with mean size ranging from 65 nm to 11.623 μm, negative zeta potential under –30 mV, and smooth surface were produced. Manageable equations based on commonly used parameters in the pharmaceutical field were obtained. The lipid to emulsifier ratio (R L/S ) was proved to statistically explain the influence of oil phase and surfactant concentration on final nanoparticles size. Besides, the homogenization pressure was found to ultimately determine LNP size for a given R L/S , while the number of passes applied mainly determined polydispersion. α-Tocopherol was used as a model drug to illustrate release properties of LNP as a function of particle size, which was optimized by the regression models. This study is intended as a first step to optimize production conditions prior to LNP production at both laboratory and industrial scale from an eminently practical approach, based on parameters extensively used in formulation.

  6. Differences of hormones involved in adipose metabolism and lactation between high and low producing Holstein cows during heat stress

    Directory of Open Access Journals (Sweden)

    Mingzi Qu

    2015-12-01

    Full Text Available The experiment was conducted to evaluate hormonal involvement in the adipose metabolism and lactation between high and low producing dairy cows in a hot environment. Forty Holstein healthy cows with a similar parity were used and assigned into high producing group (average production 41.44 ± 2.25 kg/d and low producing group (average production 29.92 ± 1.02 kg/d with 20 cows in each group. Blood samples were collected from caudal vein to determine the difference of hormones related to adipose metabolism and lactation. The highest, lowest, and average temperature humidity index (THI, recorded as 84.02, 79.35 and 81.89, respectively, indicated that cows were at the state of high heat stress. No significant differences between high and low producing groups were observed in the levels of nonestesterified fatty acid (NEFA, β-hydroxybutyrate (β-OHB, total cholesterol (TCHO, and insulin (INS (P > 0.05. However, the very low density lipoprotein (VLDL, apolipoprotein B100 (apoB-100, high-density lipoprotein (HDL-C and estrogen (E2 concentrations in high producing group were significantly higher than those of low producing group (P  0.05, whereas high producing group had a rise in the insulin-like growth factor-1 (IGF-1 level compared with low producing group (P < 0.05. These results indicated that, during summer, high and low producing dairy cows have similar levels of lipid catabolism, but high producing dairy cows have advantages in outputting hepatic triglyceride (TG.

  7. Client-centeredness of Finnish and Estonian nursing students and the support from nursing education to develop it. Students' self-evaluation.

    Science.gov (United States)

    Kalam-Salminen, Ly; Valkonen, Marjo-Riitta; Aro, Ilme; Routasalo, Pirkko

    2013-10-01

    The purpose of this comparative study is to describe the differences between Finnish and Estonian students evaluations about their client-centeredness and educational support they received to develop it. Client-centeredness has many positive effects on the quality and effectiveness of care. However, some deficiencies have been identified in the client-centeredness of nursing staff. Research on the subject has been limited, and we lack knowledge of graduating students' competence in client-centeredness and the support of their education to develop it. The sample consisted of 390 undergraduate nursing students, 195 from Finland and 195 from Estonia. The data were collected in 2009 using the structured five-point scale questionnaire. The questionnaire was designed to measure students' client-centeredness and the educational support they received from nursing education. The data were analyzed by the PASW Statistics 18-programme using descriptive statistics, Kolmogorov-Smirnov test and Mann-Whitney U-test. Predominantly, students in both countries evaluated their level of client-centeredness high. The Estonian students generally evaluated their client-centeredness higher compared to the Finnish students. The same applied to support provided by nursing education. The greatest differences were related to education and particularly theoretical teaching. In Estonia, students' client-centeredness manifested itself more in politeness and willingness to serve clients, whereas respecting the clients' values was emphasized in Finland. Students' requisites, referred here as knowledge, skills and abilities to implement client-centered nursing, for client-centeredness had deficiencies, and the support from education was also the weakest regarding these aspects. In future, education on development of nursing activities, acquisition of knowledge and services provided by health care as well as legislation should be enhanced, since these areas proved the most difficult for the students

  8. Characterization of high exopolysaccharide-producing Lactobacillus strains isolated from mustard pickles for potential probiotic applications.

    Science.gov (United States)

    Huang, Jing-Yao; Kao, Cheng-Yen; Liu, We-Sin; Fang, Tony J

    2017-06-01

    The aim of this study was to characterize high exopolysaccharide (EPS)-producing lactic acid bacteria (LAB) isolated from mustard pickles in Taiwan for potential probiotic applications. Among 39 collected LAB strains, four most productive EPS-producing strains were selected for further analysis. Comparative analyses of 16S rDNA genes rpoA and pheS sequences demonstrated that these strains were members of Lactobacillus plantarum-group (LPG). NCD 2, NLD 4, SLC 13, and NLD 16 showed survival rates of 95.83% ± 0.49%, 95.07% ± 0.64%, 105.84% ± 0.82%, and 99.65% ± 0.31% under simulated gastrointestinal conditions, respectively. No cytotoxic effects on macrophage RAW 264.7 cells were observed when they were treated with a low dose (1 μg/ml) of stimulants extracted from the tested LAB strains. The production of nitric oxide in RAW 264.7 cells incubated with various LAB stimulants showed a dose-dependent increase. Among the four strains, SLC 13 showed higher inhibitory activity on growth of Enterococcus faecalis (BCRC 12302) and Yersinia enterocolitica (BCRC 10807). NLD 4 showed strong inhibitory activity against Escherichia coli O157:H7 (ATCC 43894) as compared with the other three strains. In summary, our results suggest that Lactobacillus pentosus SLC 13 may be a good candidate for probiotic applications and for development of antibacterial compounds. [Int Microbiol 20(2):75-84 (2017)]. Copyright© by the Spanish Society for Microbiology and Institute for Catalan Studies.

  9. Molecular crowding of collagen: a pathway to produce highly-organized collagenous structures.

    Science.gov (United States)

    Saeidi, Nima; Karmelek, Kathryn P; Paten, Jeffrey A; Zareian, Ramin; DiMasi, Elaine; Ruberti, Jeffrey W

    2012-10-01

    Collagen in vertebrate animals is often arranged in alternating lamellae or in bundles of aligned fibrils which are designed to withstand in vivo mechanical loads. The formation of these organized structures is thought to result from a complex, large-area integration of individual cell motion and locally-controlled synthesis of fibrillar arrays via cell-surface fibripositors (direct matrix printing). The difficulty of reproducing such a process in vitro has prevented tissue engineers from constructing clinically useful load-bearing connective tissue directly from collagen. However, we and others have taken the view that long-range organizational information is potentially encoded into the structure of the collagen molecule itself, allowing the control of fibril organization to extend far from cell (or bounding) surfaces. We here demonstrate a simple, fast, cell-free method capable of producing highly-organized, anistropic collagen fibrillar lamellae de novo which persist over relatively long-distances (tens to hundreds of microns). Our approach to nanoscale organizational control takes advantage of the intrinsic physiochemical properties of collagen molecules by inducing collagen association through molecular crowding and geometric confinement. To mimic biological tissues which comprise planar, aligned collagen lamellae (e.g. cornea, lamellar bone or annulus fibrosus), type I collagen was confined to a thin, planar geometry, concentrated through molecular crowding and polymerized. The resulting fibrillar lamellae show a striking resemblance to native load-bearing lamellae in that the fibrils are small, generally aligned in the plane of the confining space and change direction en masse throughout the thickness of the construct. The process of organizational control is consistent with embryonic development where the bounded planar cell sheets produced by fibroblasts suggest a similar confinement/concentration strategy. Such a simple approach to nanoscale

  10. 1988. aasta suveräänsusdeklaratsioon: silmakirjalikkuse tsiviliseeriv mõju / The Estonian Declaration of Sovereignty: An example of the civilising force of hypocrisy

    Directory of Open Access Journals (Sweden)

    Hent-Raul Kalmo

    2011-01-01

    Constitution (that would have curbed the rights of the Union Republics by adopting a Declaration of Sovereignty which effectively made the application of Soviet legal acts optional in the terrirory of the Estonian SR. The Soviet leadership reacted in a confused manner, as it first greeted the Declaration, then condemned it as illegal, but also admitted that it was an expression of legitimate concerns. The fact that the notion of sovereignty was an important part of the orthodox Soviet constitutional doctrine and the apprehension that the Estonian interpretative position might diffuse into other Union Republics induced the Politburo to orchestrate a highly publicised denunciation of the Declaration. But this had the paradoxical effect of casting the Declaration as something that could be discussed, i.e., as something that deserved an argued rebuttal. In a way, the Politburo thus contributed to making the Estonian Declaration into a model that was later copied by almost all the Union Republics as they started either to head towards independence or jockey for a better position in the negotiations over the new Union Treaty, drafted in haste by the part of the Soviet leadership that was willing to opt for a confederal solution. The debate over the nature of Soviet federalism and its political aftermath illustrates the fact that a constitution which lies dormant under an authoritarian regime as a document of cynical hypocrisy has the potential of becoming a focal point for the formulation of political demands when circumstances change. The options open to the Soviet leadership in responding to the steps taken by the Baltic independence movements were clearly influenced at least to some extent by the vocabulary it could draw on to justify its response, especially since it had recently vowed to take the Soviet Constitution seriously in the future. Under propitious circumstances, hypocrisy can indeed exert a civilising force on the behaviour of an authoritarian regime.

  11. High energy density in matter produced by heavy ion beams. Annual report 1987

    International Nuclear Information System (INIS)

    1988-08-01

    Research activities presented in this annual report were carried out in 1987 in the framework of the government-funded program 'High Energy Density in Matter Produced by Heavy Ion Beams'. It addresses fundamental problems of the generation and investigation of hot dense matter. Its initial motivation and its ultimate goal is the question whether inertial confinement can be achieved by intense heavy ion beams. The new accelerator facility SIS/ESR now under construction at GSI will provide an excellent potential for research in this field. The construction work at the new validity is on schedule. The building construction is near completion and the SIS accelerator will have its first beam at the beginning of next year. First experiments at lower intensity will start in summer 1989 and the full program will run after the cooler and storage ring ESR has got operational. Accordingly, the planning and the preparation of the high energy density experiments at this unique facility was an essential part of the activities last year. In this funding period emphasis was given to the experimental activities at the existing accelerator. In addition to a number of accelerator-oriented and instrumental developments, an experiment on beam-plasma interaction had first exciting results, a significant increase of the stopping power for heavy ions in plasma was measured. Other important activities were the investigation of dielectronic recombination of highly charged ions, spectroscopic investigations aiming at the pumping of short wavelength lasers by heavy ion beams and a crossed beam experiment for the determination of Bi + + Bi + ionization cross sections. As in previous years theoretical work an space-charge dominated beam dynamics as well as on hydrodynamics of dense plasmas, radiation transport and beam plasma interaction was continued, thus providing a basis for the future experiments. (orig.)

  12. On-Board Video Recording Unravels Bird Behavior and Mortality Produced by High-Speed Trains

    Directory of Open Access Journals (Sweden)

    Eladio L. García de la Morena

    2017-10-01

    Full Text Available Large high-speed railway (HSR networks are planned for the near future to accomplish increased transport demand with low energy consumption. However, high-speed trains produce unknown avian mortality due to birds using the railway and being unable to avoid approaching trains. Safety and logistic difficulties have precluded until now mortality estimation in railways through carcass removal, but information technologies can overcome such problems. We present the results obtained with an experimental on-board system to record bird-train collisions composed by a frontal recording camera, a GPS navigation system and a data storage unit. An observer standing in the cabin behind the driver controlled the system and filled out a form with data of collisions and bird observations in front of the train. Photographs of the train front taken before and after each journey were used to improve the record of killed birds. Trains running the 321.7 km line between Madrid and Albacete (Spain at speeds up to 250–300 km/h were equipped with the system during 66 journeys along a year, totaling approximately 14,700 km of effective recording. The review of videos produced 1,090 bird observations, 29.4% of them corresponding to birds crossing the infrastructure under the catenary and thus facing collision risk. Recordings also showed that 37.7% bird crossings were of animals resting on some element of the infrastructure moments before the train arrival, and that the flight initiation distance of birds (mean ± SD was between 60 ± 33 m (passerines and 136 ± 49 m (raptors. Mortality in the railway was estimated to be 60.5 birds/km year on a line section with 53 runs per day and 26.1 birds/km year in a section with 25 runs per day. Our results are the first published estimation of bird mortality in a HSR and show the potential of information technologies to yield useful data for monitoring the impact of trains on birds via on-board recording systems. Moreover

  13. Exploring Constructivist Social Learning Practices in Aiding Russian-Speaking Teachers to Learn Estonian: An Action Research Approach

    Science.gov (United States)

    Kiilo, Tatjana; Kutsar, Dagmar

    2012-01-01

    Based on appreciative inquiry and threshold concepts from an intercultural learning perspective, the article makes insights into the constructivist social learning practice of Estonian language learning amongst Russian-speaking teachers in Estonia. The application of educational action research methodology, more specifically that of Bridget…

  14. Proficiency Assessment of Male Volleyball Teams of the 13-15-Year Age Group at Estonian Championships

    Science.gov (United States)

    Stamm, Meelis; Stamm, Raini; Koskel, Sade

    2008-01-01

    Study aim: Assessment of feasibility of using own computer software "Game" at competitions. Material and methods: The data were collected during Estonian championships in 2006 for male volleyball teams of the 13-15-years age group (n = 8). In all games, the performance of both teams was recorded in parallel with two computers. A total of…

  15. Energy deposition at the bone-tissue interface from nuclear fragments produced by high-energy nucleons

    Science.gov (United States)

    Cucinotta, Francis A.; Hajnal, Ferenc; Wilson, John W.

    1990-01-01

    The transport of nuclear fragmentation recoils produced by high-energy nucleons in the region of the bone-tissue interface is considered. Results for the different flux and absorbed dose for recoils produced by 1 GeV protons are presented in a bidirectional transport model. The energy deposition in marrow cavities is seen to be enhanced by recoils produced in bone. Approximate analytic formulae for absorbed dose near the interface region are also presented for a simplified range-energy model.

  16. Thermophysical property measurement at high temperatures by laser-produced plasmas

    International Nuclear Information System (INIS)

    Kim, Y.W.

    1993-01-01

    Excitation by a high-power laser pulse of a material surface generates a sequence of plasma, fluid flow, and acoustic events. These are well separated in time, and their detection and analysis can lead to determination of material properties of the condensed phase target. We have developed a new methodology for real-time determination of molten metal composition by time-resolved spectroscopy of laser-produced plasmas (LPP). If the laser pulse is shaped in such a way that the movement of the bulk surface due to evaporation is kept in pace with the thermal diffusion front advancing into the interior of the target, the LPP plume becomes representative of the bulk in elemental composition. In addition, the mass loss due to LPP ablation is very well correlated with the thermal diffusivity of the target matter. For several elemental solid specimens, we show that the product of the ablation thickness and heat of formation is proportional to the thermal diffusivity per unit molecular weight. Such measurements can be extended to molten metal specimens if the mass loss by ablation, density, heat of formation, and molecular weight can be determined simultaneously. The results from the solid specimen and the progress with a levitation-assisted molten metal experiment are presented

  17. Chemical and biological studies on producing high quality biscuits with irradiated tomato wastes

    International Nuclear Information System (INIS)

    Nassef, A.E.

    2005-01-01

    The present investigation has been carried out to produce high quality biscuits for treatment of some special diseases. In this study, the total tomato processing wastes were used as new source of protein in which the most predominate elements were found to be phosphorus, potassium and magnesium. Phenyl alanine was found to be the first limiting amino acid, while lysine was the second limiting amino acid. It was found to contain about 30.66% fiber and 28.1% protein. The total tomato processing wastes remain unutilized and they not only add to the disposal problem, but also aggravate environmental pollution. Tomato wastes were irradiated in two doses (1.5 and 2.5 KGy) for preservation. Biscuits were made with supplementation of 5, 10 and 15% tomato wastes. All samples of biscuits were examined for chemical composition and organoleptic evaluation. Biological assay was carried out on rats fed biscuits containing 15% irradiated and non-irradiated tomato wastes. The weight gain, serum cholesterol and triglycerides were determined. Internal organs were also followed. The results obtained showed that 15% tomato wastes biscuit had the highest content of lysine, isoleucine and fiber (6.36, 2.72 and 24.80, respectively) and also scored a good grade. Weight gain, cholesterol and triglycerides were reduced comparable to control and there was no effect of irradiation on the rats internal organs

  18. Study of discharges produced by surface waves under medium and high pressure: application to chemical analysis

    International Nuclear Information System (INIS)

    Laye epouse Granier, Agnes

    1986-01-01

    This report deals with the study of microwave discharges produced in argon gas by surface waves in the 20-760 Torr pressure range. Application to chemical analysis by emission optical spectroscopy is also investigated. First of all we study the propagation of a surface wave in a bounded plasma in which the effective collision frequency for momentum transfer ν is higher than the excitation one. The axial electron density profile is determined from two diagnostic techniques, i.e., phase variations of the wave field and Stark broadening of H β line. Then we deduce the discharge characteristics ν, θ (maintaining power of an electron-ion pair) and E eff (effective electric field for discharge sustaining) from the electron density profile. Then an energy balance of the discharge is developed. It explains the change of operating conditions in the 20-50 Torr range. At low pressure the discharge is governed by ambipolar diffusion whereas at high pressure, the electrons are mainly lost by volume recombination of Ar 2 + . Finally, we report on chemical analysis experiment of gases (optimum sensibility in found near 100 Torr) and of metallic solutions sprayed by a graphite oven. Performances of such a design and ICP plasma torches are compared. (author) [fr

  19. Life Cycle Analysis of High Quality Recycled Aggregate Produced byHeating and Rubbing Method

    Science.gov (United States)

    Shima, Hirokazu; Matsuhashi, Ryuji; Yoshida, Yoshikuni; Tateyashiki, Hisashi

    Most of demolished concrete is recycled as road subbase, but its generation is expected to increase rapidly and exceed the demand of road subbase in a near future. To promote the recycling of concrete, the technology to produce high quality recycled aggregate by the heating and rubbing method has been developed. In this method, demolished concrete is heated up to about 300°C in a heater to make cement paste brittle with its dehydration. The heated concrete is then rubbed in two mills to recover the recycled aggregate, while the paste is removed from the surface of aggregate and collected as cement fine powder. In this method, much energy is consumed to heat and rub concrete; however, the cement fine powder is utilized for a soil stabilizer and cement raw materials, so that the environmental load is reduced in cement manufacturing. The life cycle analysis of the recycled aggregate is carried out to evaluate this technology. As a result, the life cycle CO2 is a negative value because the deduction of CO2 emission in cement manufacturing by the powder is much large. This technology is proved to be very effective to reduce CO2.

  20. Numerical simulation of thermal loading produced by shaped high power laser onto engine parts

    International Nuclear Information System (INIS)

    Song Hongwei; Li Shaoxia; Zhang Ling; Yu Gang; Zhou Liang; Tan Jiansong

    2010-01-01

    Recently a new method for simulating the thermal loading on pistons of diesel engines was reported. The spatially shaped high power laser is employed as the heat source, and some preliminary experimental and numerical work was carried out. In this paper, a further effort was made to extend this simulation method to some other important engine parts such as cylinder heads. The incident Gaussian beam was transformed into concentric multi-circular patterns of specific intensity distributions, with the aid of diffractive optical elements (DOEs). By incorporating the appropriate repetitive laser pulses, the designed transient temperature fields and thermal loadings in the engine parts could be simulated. Thermal-structural numerical models for pistons and cylinder heads were built to predict the transient temperature and thermal stress. The models were also employed to find the optimal intensity distributions of the transformed laser beam that could produce the target transient temperature fields. Comparison of experimental and numerical results demonstrated that this systematic approach is effective in simulating the thermal loading on the engine parts.

  1. Nutritional quality of fish faeces is enhanced by highly unsaturated fatty acid-producing heterotrophic protozoa

    Science.gov (United States)

    Fujibayashi, Megumu; Tanaka, Nobuyuki; Hashido, Shun; Takasawa, Aya; Nishimura, Osamu

    2018-05-01

    Highly unsaturated fatty acids such as 20:5n3 (EPA) are both hormone precursors and cell membrane components, making them important nutrients for aquatic animals. Many animals must obtain EPA from their diets because they cannot synthesize enough EPA to meet their requirements, and algae are the main source of EPA in aquatic ecosystems. In a previous study, we detected EPA in the faeces of Danio rerio, a freshwater fish, even though the fish consumed a green algae diet that did not contain EPA. The objective of this study was to determine why EPA was detected in fish faeces. A significant positive relationship was detected between the number of heterotrophic protozoa and the concentration of EPA in the faeces, which suggests that this EPA was of protozoan origin. In addition, another experiment showed that protozoa adhered to faeces far more than the green algal diet remnants, which indicates that protozoa preferred to swarm on faeces. Furthermore, we cultured protozoa in an EPA-free medium and fed them a bacterial diet also lacking EPA, and found that Cyclidium sp. synthesized EPA de novo. The results demonstrate that protozoa produce essential fatty acids and enhance the nutritional quality of animal faeces in detritus-based food webs in freshwater ecosystems.

  2. Thin silicon foils produced by epoxy-induced spalling of silicon for high efficiency solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Martini, R., E-mail: roberto.martini@imec.be [Department of Electrical Engineering, KU Leuven, Kasteelpark 10, 3001 Leuven (Belgium); imec, Kapeldreef 75, 3001 Leuven (Belgium); Kepa, J.; Stesmans, A. [Department of Physics, KU Leuven, Celestijnenlaan 200 D, 3001 Leuven (Belgium); Debucquoy, M.; Depauw, V.; Gonzalez, M.; Gordon, I. [imec, Kapeldreef 75, 3001 Leuven (Belgium); Poortmans, J. [Department of Electrical Engineering, KU Leuven, Kasteelpark 10, 3001 Leuven (Belgium); imec, Kapeldreef 75, 3001 Leuven (Belgium); Universiteit Hasselt, Martelarenlaan 42, B-3500 Hasselt (Belgium)

    2014-10-27

    We report on the drastic improvement of the quality of thin silicon foils produced by epoxy-induced spalling. In the past, researchers have proposed to fabricate silicon foils by spalling silicon substrates with different stress-inducing materials to manufacture thin silicon solar cells. However, the reported values of effective minority carrier lifetime of the fabricated foils remained always limited to ∼100 μs or below. In this work, we investigate epoxy-induced exfoliated foils by electron spin resonance to analyze the limiting factors of the minority carrier lifetime. These measurements highlight the presence of disordered dangling bonds and dislocation-like defects generated by the exfoliation process. A solution to remove these defects compatible with the process flow to fabricate solar cells is proposed. After etching off less than 1 μm of material, the lifetime of the foil increases by more than a factor of 4.5, reaching a value of 461 μs. This corresponds to a lower limit of the diffusion length of more than 7 times the foil thickness. Regions with different lifetime correlate well with the roughness of the crack surface which suggests that the lifetime is now limited by the quality of the passivation of rough surfaces. The reported values of the minority carrier lifetime show a potential for high efficiency (>22%) thin silicon solar cells.

  3. Thin silicon foils produced by epoxy-induced spalling of silicon for high efficiency solar cells

    International Nuclear Information System (INIS)

    Martini, R.; Kepa, J.; Stesmans, A.; Debucquoy, M.; Depauw, V.; Gonzalez, M.; Gordon, I.; Poortmans, J.

    2014-01-01

    We report on the drastic improvement of the quality of thin silicon foils produced by epoxy-induced spalling. In the past, researchers have proposed to fabricate silicon foils by spalling silicon substrates with different stress-inducing materials to manufacture thin silicon solar cells. However, the reported values of effective minority carrier lifetime of the fabricated foils remained always limited to ∼100 μs or below. In this work, we investigate epoxy-induced exfoliated foils by electron spin resonance to analyze the limiting factors of the minority carrier lifetime. These measurements highlight the presence of disordered dangling bonds and dislocation-like defects generated by the exfoliation process. A solution to remove these defects compatible with the process flow to fabricate solar cells is proposed. After etching off less than 1 μm of material, the lifetime of the foil increases by more than a factor of 4.5, reaching a value of 461 μs. This corresponds to a lower limit of the diffusion length of more than 7 times the foil thickness. Regions with different lifetime correlate well with the roughness of the crack surface which suggests that the lifetime is now limited by the quality of the passivation of rough surfaces. The reported values of the minority carrier lifetime show a potential for high efficiency (>22%) thin silicon solar cells.

  4. Spectroscopy of high lying resonances in {sup 9}Be produced with radioactive {sup 8}Li beams

    Energy Technology Data Exchange (ETDEWEB)

    Lepini-Szily, A.; Leistenschneider, E.; Lichtenthäler, R.; Guimaraes, V.; Condori, R. Pampa; Scarduelli, V.; Rossi, E.; Zagatto, V.A.; Aguiar, V.A.P.; Duarte, J., E-mail: alinka@if.usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Fisica; Mendes Junior, D.R.; Faria, P.N. de; Santos, H. [Universidade Federal Fluminense (UFF), Niteroi, RJ (Brazil). Instituto de Fisica; Descouvemont, P. [Physique Nucleaire Theorique et Physique Mathematique, Universite Libre de Bruxelles (ULB), Brussels (Belgium); Barioni, A. [Universidade Federal da Bahia (UFBA), Salvador, BA (Brazil); Pires, K.C.C. [Universidade Tecnologica Federal do Parana (UFTPR), Cornelio Procopio, PR (Brazil); Morcelle, V. [Universidade Federal de Itajuba (UNIFEI), Itabira, MG (Brazil); Moraes, M.C. [Centro Brasileiro de Pesquisas Fisicas (CBPF), Rio de Janeiro, RJ (Brazil); Britos, T.; Assuncao, M. [Universidade Federal de Sao Paulo (UNIFESP), Diadema, SP (Brazil); Zamora, J.C. [Technische Universität Darmstadt, (Germany); Shorto, J.M.B. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)

    2014-07-01

    We present the results of the {sup 8}Li(p,α){sup 5}He and {sup 8}Li(p,p){sup 8}Li reactions measured at the RIBRAS (Radioactive Ion Beams in Brazil) system. The experiment was realized in inverse kinematics using a thick [CH{sub 2}]{sub n} polyethylene target and an incident {sup 8}Li beam, produced by RIBRAS. Using the thick target method, the complete excitation function could be measured between E{sub cm} = 0.2 - 2.1 MeV, which includes the Gamow peak energy region. The excitation function of the {sup 8}Li(p,α){sup 5}He reaction, populating resonances between 16.888 and 19.0 MeV in {sup 9}Be, was obtained[1] and the resonances were fitted using R-matrix calculations. This study shed light on spins, parities, partial widths and isospin values of high lying resonances in {sup 9}Be. The measurement of the resonant elastic scattering {sup 8}Li(p,p){sup 8}Li populating resonances in the same energy region can constrain the resonance parameters. Preliminary results of the elastic scattering are also presented. (author)

  5. Scintillation and ionization yields produced by α-particles in high-density gaseous xenon

    International Nuclear Information System (INIS)

    Kusano, H.; Ishikawa, T.; Lopes, J.A.M.; Miyajima, M.; Shibamura, E.; Hasebe, N.

    2012-01-01

    The average numbers of scintillation photons and liberated electrons produced by 5.49-MeV α-particles were measured in high-density gaseous xenon. The density range is 0.12–1.32 g/cm 3 for scintillation measurements at zero electric field, and 0.12–1.03 g/cm 3 for the scintillation and ionization measurements under various electric fields. The density dependence of scintillation yield at zero electric field was observed. The W s -value, which is defined as the average energy expended per photon, increases with density and becomes almost constant in the density range above 1.0 g/cm 3 . Anti-correlations between average numbers of scintillation photons and liberated electrons were found to vary with density. It was also found that the total number of scintillation photons and liberated electrons decreases with increasing density. Several possible reasons for the variation in scintillation and ionization yields with density are discussed.

  6. Tabud ja reeglid. Sissevaateid eesti laagriromaani / Taboos and Rules. Insights into Prison Camp Novels by Estonian Writers

    Directory of Open Access Journals (Sweden)

    Anneli Kõvamees

    2013-12-01

    Full Text Available The article concentrates on Estonian novels depicting Soviet prison camps in the 1940s and 1950s. The goal is to map themes, motifs and characteristics in such novels, concentrating on various taboos and rules in the prison camp environment. For a long time the Soviet prison camp theme was not publicly discussed in Estonia due to political reasons. Texts dealing with prison camps could appear in print only outside the Soviet Union; the way Estonians saw these historical events and hellish experiences were depicted mostly in exile novels. Most notable are the novels by Arved Viirlaid (b. 1922, e.g., Kes tappis Eerik Hormi? (Who Killed Eerik Horm? (1974, Surnud ei loe (The Dead do not Read (1975, Vaim ja ahelad (Mind and Chains (1961. Estonian prison camp novels can be seen as “the literature of testimony”, to use the term by Leona Toker. Dramatic historical events are written down to record the events and to show the inhumane nature of Soviet society. These records of the dramatic past follow certain patterns and create certain self- and hetero-images. A prison camp is a closed territory within a closed territory; prison camps can be seen as small models of Soviet society. Prison camp novels give a detailed view of the environment of the prison camp, its inhabitants and activities. Two central aspects are labour and food; the life of the prisoner whirls around these. The most important thing is to survive, which often leads to moral decline, e.g., stealing, cheating. However, there are lines Estonians do not cross, e.g., cannibalism or homosexual relationships with superiors. Estonians are always depicted as political prisoners (not common criminals and heterosexuals, while Russians are portrayed mainly as criminals and often also as homosexuals. Another important component of the image of the Estonians is their enterprising spirit and ability to manage even under very difficult conditions. Therefore, several oppositions can be identified, e

  7. Cellulose/inorganic-composite fibers for producing textile fabrics of high X-ray absorption properties

    International Nuclear Information System (INIS)

    Günther, Karoline; Giebing, Christina; Askani, Antonia; Leisegang, Tilmann; Krieg, Marcus; Kyosev, Yordan; Weide, Thomas; Mahltig, Boris

    2015-01-01

    Common textile materials as cotton or polyester do not possess reliable X-ray absorption properties. This is due to their morphology and chemical composition in particular. Common fibers are built up from organic polymers containing mainly the elements carbon, hydrogen, oxygen and nitrogen. These “light” elements only have low X-ray absorption coefficients. In contrast, inorganic materials composed of “heavy” elements with high atomic numbers, e.g. barium or bismuth, exhibit X-ray absorption coefficients higher by up to two orders of magnitude. To obtain a flexible yarn with high X-ray absorption properties both these materials, the organic polymer and the inorganic X-ray absorber, are combined to an inorganic/organic composite fiber material. Hence, as the organic component cellulose from modified Lyocell-process is used as carrier fiber and blended with inorganic absorber particles of low toxicity and high absorption coefficients, as bariumsulphate, bariumtitanate or bismuthoxide. A content of inorganic absorber particles equally distributed in the whole fiber of up to 20% is achieved. The composite fibers are produced as staple or filament fibers and processed to multifilament or staple fiber yarns. The staple fiber yarns are rotor-spinned to increase the comfort of the subsequent textile material. Several woven fabrics, considering multilayer structure and different warp/weft density, are developed. The energy dependent X-ray shielding properties are determined in dependence on the different yarn compositions, yarn types and structural parameters of the woven fabrics. As a result, a production process of textile materials with comfortable and dedicated X-ray absorption properties is established. It offers a promising opportunity for manufacturing of specialized textiles, working clothes or uniforms applicable for medicine, air craft and security personal, mining as well as for innovative composite materials. - Highlights: • Preparation of cellulosic

  8. Cellulose/inorganic-composite fibers for producing textile fabrics of high X-ray absorption properties

    Energy Technology Data Exchange (ETDEWEB)

    Günther, Karoline; Giebing, Christina; Askani, Antonia [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany); Leisegang, Tilmann [Saxray GmbH, Maria-Reiche-Str. 1, 01109 Dresden (Germany); Krieg, Marcus [TITK, Thüringisches Institut für Textil- und Kunststoff-Forschung e.V., Breitscheidstraße 97, 07407 Rudolstadt (Germany); Kyosev, Yordan; Weide, Thomas [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany); Mahltig, Boris, E-mail: Boris.Mahltig@hs-niederrhein.de [FTB, Hochschule Niederrhein – University of Applied Science, Faculty of Textile and Clothing Technology, Webschulstr. 31, 41065 Mönchengladbach (Germany)

    2015-11-01

    Common textile materials as cotton or polyester do not possess reliable X-ray absorption properties. This is due to their morphology and chemical composition in particular. Common fibers are built up from organic polymers containing mainly the elements carbon, hydrogen, oxygen and nitrogen. These “light” elements only have low X-ray absorption coefficients. In contrast, inorganic materials composed of “heavy” elements with high atomic numbers, e.g. barium or bismuth, exhibit X-ray absorption coefficients higher by up to two orders of magnitude. To obtain a flexible yarn with high X-ray absorption properties both these materials, the organic polymer and the inorganic X-ray absorber, are combined to an inorganic/organic composite fiber material. Hence, as the organic component cellulose from modified Lyocell-process is used as carrier fiber and blended with inorganic absorber particles of low toxicity and high absorption coefficients, as bariumsulphate, bariumtitanate or bismuthoxide. A content of inorganic absorber particles equally distributed in the whole fiber of up to 20% is achieved. The composite fibers are produced as staple or filament fibers and processed to multifilament or staple fiber yarns. The staple fiber yarns are rotor-spinned to increase the comfort of the subsequent textile material. Several woven fabrics, considering multilayer structure and different warp/weft density, are developed. The energy dependent X-ray shielding properties are determined in dependence on the different yarn compositions, yarn types and structural parameters of the woven fabrics. As a result, a production process of textile materials with comfortable and dedicated X-ray absorption properties is established. It offers a promising opportunity for manufacturing of specialized textiles, working clothes or uniforms applicable for medicine, air craft and security personal, mining as well as for innovative composite materials. - Highlights: • Preparation of cellulosic

  9. Prevalence of lameness in high-producing holstein cows housed in freestall barns in Minnesota.

    Science.gov (United States)

    Espejo, L A; Endres, M I; Salfer, J A

    2006-08-01

    A cross-sectional study was conducted to estimate the prevalence of clinical lameness in high-producing Holstein cows housed in 50 freestall barns in Minnesota during summer. Locomotion and body condition scoring were performed on a total of 5,626 cows in 53 high-production groups. Cow records were collected from the nearest Dairy Herd Improvement Association test date, and herd characteristics were collected at the time of the visit. The mean prevalence of clinical lameness (proportion of cows with locomotion score >or=3 on a 1-to-5 scale, where 1 = normal and 5 = severely lame), and its association with lactation number, month of lactation, body condition score, and type of stall surface were evaluated. The mean prevalence of clinical lameness was 24.6%, which was 3.1 times greater, on average, than the prevalence estimated by the herd managers on each farm. The prevalence of lameness in first-lactation cows was 12.8% and prevalence increased on average at a rate of 8 percentage units per lactation. There was no association between the mean prevalence of clinical lameness and month of lactation (for months 1 to 10). Underconditioned cows had a higher prevalence of clinical lameness than normal or overconditioned cows. The prevalence of lameness was lower in freestall herds with sand stalls (17.1%) than in freestall herds with mattress stall surfaces (27.9%). Data indicate that the best 10th percentile of dairy farms had a mean prevalence of lameness of 5.4% with only 1.47% of cows with locomotion score = 4 and no cows with locomotion score = 5.

  10. Immobilization of high level nuclear wastes in sintered glasses. Devitrification evaluation produced with different thermal treatments

    International Nuclear Information System (INIS)

    Messi de Bernasconi, N.B.; Russo, D.O.; Bevilacqua, M.E.; Sterba, M.E.; Heredia, A.D.; Audero, M.A.

    1990-01-01

    This work describes immobilization of high level nuclear wastes in sintered glass, as alternative way to melting glass. Different chemical compositions of borosilicate glass with simulate waste were utilized and satisfactory results were obtained at laboratory scale. As another contribution to the materials studies by X ray powder diffraction analysis, the devitrification produced with different thermal treatments, was evaluated. The effect of the thermal history on the behaviour of fission products containing glasses has been studied by several working groups in the field of high level waste fixation. When the glass is cooled through the temperature range from 800 deg C down to less than 400 deg C (these temperatures are approximates) nucleation and crystal growth can take place. The rate of crystallization will be maximum near the transformation point but through this rate may be low at lower temperatures, devitrification can still occur over long periods of time, depending on the glass composition. It was verified that there can be an appreciable increase in leaching in some waste glass compositions owing to the presence of crystalline phases. On the other hand, other compositions show very little change in leachability and the devitrified product is often preferable as there is less tendency to cracking, particularly in massive blocks of glass. A borosilicate glass, named SG7, which was developed specially in the KfK for the hot pressing of HLW with glass frit was studied. It presents a much enhanced chemical durability than borosolicate glass developed for the melting process. The crystallization behaviour of SG7 glass products was investigated in our own experiments by annealing sintered samples up to 3000 h at temperatures between 675 and 825 deg C. The samples had contained simulated waste with noble metals, since these might act as foreign nuclei for crystallization. Results on the extent of devitrification and time- temperature- transformation curves are

  11. Studies of high repetition rate laser-produced plasma soft-X-ray amplifiers

    International Nuclear Information System (INIS)

    Cassou, K.

    2006-12-01

    The progress made as well on the Ti:Sa laser system, as in the control and the knowledge of laser produced X-UV sources allowed the construction of a X-UV laser station dedicated to the applications. My thesis work falls under the development of this station and more particularly on the characterization of a X-UV laser plasma amplifier. The experimental study relates to the coupling improvement of the pump infra-red laser with plasma within the framework of the transient collisional X-UV laser generation. These X-UV lasers are generated in a plasma formed by the interaction of a solid target and a laser pulse of approximately 500 ps duration, followed by a second infra-red laser pulse known as of pump (about 5 ps) impinging on the target in grazing incidence. For the first time, a complete parametric study was undertaken on the influence of the grazing angle on the pumping of the amplifying medium. One of the results was to reach very high peak brightness about 10 28 ph/s/mm 2 /mrad 2 /(0.1%bandwidth), which compares well with the free-electron laser brightness. Moreover, we modified then used a new two-dimensional hydrodynamic code with adaptive mesh refinement in order to understand the influence of the space-time properties of the infra-red laser on the formation and the evolution of the amplifying plasma. Our modeling highlighted the interest to use a super Gaussian transverse profile for the line focus leading to an increase in a factor two of the gain region size and a reduction of the electron density gradient by three orders of magnitude. These improvements should strongly increase the energy contained in X-UV laser beam. We thus used X-UV laser to study the appearance of transient defects produced by a laser IR on a beam-splitter rear side. We also began research on the mechanisms of DNA damage induced by a very intense X-UV radiation. (author)

  12. Implementing Good Practices Programs to Encourage Production of High-Quality, Safer Produce in Mississippi

    Science.gov (United States)

    Mahmoud, Barakat S. M.; Stafne, Eric T.; Coker, Christine H.; Bachman, Gary R.; Bell, Nicole

    2016-01-01

    Fifty-four growers/producers attended four 1-day good agricultural practices (GAP) and good handling practices (GHP) workshops at four locations in Mississippi. Pre- and post workshop survey data indicated that the participants' food safety knowledge increased by 15%. Furthermore, the workshops helped producers develop their own food safety plans.…

  13. Identity and Othering in Past and Present: Representations of the Soviet Era in Estonian Post-Soviet Textbooks

    Directory of Open Access Journals (Sweden)

    Katrin Kello

    2018-02-01

    Full Text Available This paper analyses representations of the ‘core Soviet era’ (1945-1985 in Estonian post-Soviet history textbooks (1989-2016. Attitudes towards the Soviet system have been a rich resource for identity building, and hence a powerful political tool across the whole of the post-Soviet block. Based on an analysis of sections about the Soviet era in Estonia in 21 textbooks, the paper takes a look at how textbooks reflect broader processes of social meaning making, identity building and othering after a profound social and political turn. In 1989 and during the early 1990s, perspectives and narratives in Estonian history textbooks were closely related to social memory and national politics, enacting a specific social representation of the Soviet era that dominated the Estonian-speaking public space during the 1990s. The Soviet era, Russia and local Russians became the main Others for Estonia and Estonians. Over time, public discourse has diversified. The national curriculum and textbooks, however, still maintain the canon that formed in 1990s and thus reflect earlier sentiments. Apart from the increasing salience of Soviet-era daily life in more recent textbooks, the thematic choices and emphases have changed little since the 1990s. Therefore, even if the style of writing has ‘cooled down’, issues of identity preservation, resistance and accommodation, together with a saliently negative representation of wrongdoings by the Soviet system, still prevail. On the one hand, this testifies to the resilience of an established tradition in the textbook genre in general. On the other hand, it reflects the dominance of an ethnocentric tradition in Estonian history textbook writing. The paper discusses the implications of these findings for interethnic relations in Estonia.

  14. High Temperature-Induced Expression of Rice α-Amylases in Developing Endosperm Produces Chalky Grains

    Directory of Open Access Journals (Sweden)

    Masaru Nakata

    2017-12-01

    Full Text Available Global warming impairs grain filling in rice and reduces starch accumulation in the endosperm, leading to chalky-appearing grains, which damages their market value. We found previously that high temperature-induced expression of starch-lytic α-amylases during ripening is crucial for grain chalkiness. Because the rice genome carries at least eight functional α-amylase genes, identification of the α-amylase(s that contribute most strongly to the production of chalky grains could accelerate efficient breeding. To identify α-amylase genes responsible for the production of chalky grains, we characterized the histological expression pattern of eight α-amylase genes and the influences of their overexpression on grain appearance and carbohydrate components through a series of experiments with transgenic rice plants. The promoter activity of most α-amylase genes was elevated to various extents at high temperature. Among them, the expression of Amy1A and Amy3C was induced in the internal, especially basal to dorsal, region of developing endosperm, whereas that of Amy3D was confined near the ventral aleurone. These regions coincided with the site of occurrence of chalkiness, which was in clear contrast to conventionally known expression patterns of the enzyme in the scutellum and aleurone during seed germination. Furthermore, overexpression of α-amylase genes, except for Amy3E, in developing endosperm produced various degrees of chalky grains without heat exposure, whereas that of Amy3E yielded normal translucent grains, as was the case in the vector control, even though Amy3E-overexpressing grains contained enhanced α-amylase activities. The weight of the chalky grains was decreased due to reduced amounts of starch, and microscopic observation of the chalky part of these grains revealed that their endosperm consisted of loosely packed round starch granules that had numerous pits on their surface, confirming the hydrolysis of the starch reserve by

  15. Medium- and high-pressure gauges and transducers produced by laser welding technology

    Science.gov (United States)

    Daurelio, Giuseppe; Nenci, Fabio; Cinquepalmi, Massimo; Chita, Giuseppe

    1998-07-01

    Industrial manufacturers produce many types of pressure gauges and transducers according to the applications, for gas or liquid, for high-medium and low pressure ranges. Nowadays the current production technology generally prefers to weld by micro TIG source the metallic corrugated membranes to the gauge or transducer bodies for the products, operating on the low pressure or medium pressure ranges. For the other ones, operating to high pressure range, generally the two components of the transducers are both threaded only and threaded and then circularly welded by micro TIG for the other higher range, till to 1000 bar. In this work the products, operating on the approximately equals 30 divided by 200 bar, are considered. These, when assembled on industrial plants, as an outcome of a non-correct operating sequence, give a 'shifted' electrical signal. This is due to a shift of the 'zero electrical signal' that unbalances the electrical bridge - thin layer sensor - that is the sensitive part of the product. Moreover, for the same problem, often some mechanical settlings of the transducer happen during the first pressure semi-components, with an increasing of the product manufacturing costs. In light of all this, the above referred, in this work the whole transducer has been re-designed according to the specific laser welding technology requirements. On the new product no threaded parts exist but only a circular laser welding with a full penetration depth about 2.5 divided by 3 mm high. Three different alloys have been tested according to the applications and the mechanical properties requested to the transducer. By using a 1.5 KW CO2 laser system many different working parameters have been evaluated for correlating laser parameters to the penetration depths, crown wides, interaction laser-materia times, mechanical and metallurgical properties. Moreover during the laser welding process the measurements of the maximum temperature, reached by the transducer top, has been

  16. Synthesis and morphology of iron-iron oxide core-shell nanoparticles produced by high pressure gas condensation

    NARCIS (Netherlands)

    Xing, Lijuan; ten Brink, Gert H.; Chen, Bin; Schmidt, Franz P.; Haberfehlner, Georg; Hofer, Ferdinand; Kooi, Bart J.; Palasantzas, Georgios

    2016-01-01

    Core-shell structured Fe nanoparticles (NPs) produced by high pressure magnetron sputtering gas condensation were studied using transmission electron microscopy (TEM) techniques, electron diffraction, electron energy-loss spectroscopy (EELS), tomographic reconstruction, and Wulff shape construction

  17. Draft Genome Sequence of Komagataeibacter rhaeticus Strain AF1, a High Producer of Cellulose, Isolated from Kombucha Tea.

    Science.gov (United States)

    Dos Santos, Renato Augusto Corrêa; Berretta, Andresa A; Barud, Hernane da Silva; Ribeiro, Sidney José Lima; González-García, Laura Natalia; Zucchi, Tiago Domingues; Goldman, Gustavo H; Riaño-Pachón, Diego M

    2014-07-24

    Here, we present the draft genome sequence of Komagatabaeicter rhaeticus strain AF1, which was isolated from Kombucha tea and is capable of producing high levels of cellulose. Copyright © 2014 dos Santos et al.

  18. High protein- and high lipid-producing microalgae from Outback Australia as potential feedstock for animal feed and biodiesel

    Directory of Open Access Journals (Sweden)

    Van Thang eDuong

    2015-05-01

    Full Text Available Microalgal biomass can be used for biodiesel, feed and food production. Collection and identification of local microalgal strains in the Northern Territory – Australia was conducted to identify strains with high protein and lipid contents as potential feedstock for animal feed and biodiesel production, respectively. A total of 36 strains were isolated from 13 samples collected from a variety of freshwater locations, such as dams, ponds and streams and subsequently classified by 18S rDNA sequencing. All of the strains were green microalgae and predominantly belong to Chlorella sp., Scenedesmus sp., Desmodesmus sp., Chlamydomonas sp., Pseudomuriella sp., Tetraedron caudatum, Graesiella emersonii and Mychonastes timauensis. Among the fastest growing strains, Scenedesmus sp. NT1d possessed the highest content of protein; reaching up to 33% of its dry weight. In terms of lipid production, Chlorella sp. NT8a and Scenedesmus dimorphus NT8e produced the highest triglyceride contents of 116.9 µg mL-1 culture and 99.13 µg mL-1, respectively, as measured by gas chromatography-mass spectroscopy (GC-MS of fatty acid methyl esters (FAMEs. These strains may present suitable candidates for biodiesel production after further optimization of culturing conditions, while their protein-rich biomass could be used for animal feed.

  19. Ca-48 handling for a cyclotron ECR ion source to produce highly intense ion beams

    International Nuclear Information System (INIS)

    Lebedev, V.Ya.; Bogomolov, S.L.; Dmitriev, S.N.; Kutner, V.B.; Shamanin, A.N.; Yakushev, A.B.

    2002-01-01

    Production of highly intense ion beams of 48 Ca is one of the main tasks in experiments carried out within the framework of the synthesis of new superheavy elements. 48 Ca is very rare and expensive isotope, therefore there is necessity to reach the high intensity of ion beams of the isotope at a low consumption rate. Analysis and our preliminary experiments have showed that the best way of producing highly intense calcium ion beams is evaporation of metallic calcium in an ECR ion source. So we have developed a technique of metallic 48 Ca production by reducing CaO (this chemical form is available at the market with 40-80% of 48 Ca ) with aluminium powder. We used two tantalum crucibles: a larger, with a mixture of CaO + Al heated up to 1250 deg C, which was connected to the smaller (2 mm I.D. and 30 mm long) in which calcium vapour condensed. The temperature distribution in the small crucible was about 50 deg C at the bottom and about 500 deg C in the middle of the crucible. The pressure inside of the set-up was between 0.1 and 1 Pa. The production rate of metallic 48 Ca was 10-20 mg/h. The crucible with the condensed metallic Ca in argon atmosphere was transferred to the ECR-4M ion source, where it was inserted in a wired tubular oven and the calcium evaporation was controlled through the oven power supply. The application of metallic 48 Ca as the working substance for the ECR-4M ion source of the U-400 cyclotron of allowed us to approach a stable high intensity of 48 Ca ion beams: the intensities for the internal and external beams were 10 13 c -1 and 3.10 12 c -1 , respectively, at a consumption rate about 0.4 mg/h. A technique was developed for the reclamation of 48 Ca from the residue inside of the large crucible and from the inner parts of the ECR ion source. Extracting Ca from the inner parts of the ion source enabled us to save up to some 25% of the calcium used in the ECR ion source, so that the actual consumption rate was about 0.3 mg/h at the highest 48

  20. Backwaters in the upper reaches of reservoirs produce high densities of age-0 crappies

    Science.gov (United States)

    Dagel, Jonah D.; Miranda, Leandro E.

    2012-01-01

    Reservoir backwaters are aquatic habitats in floodplains of reservoir tributaries that are permanently or periodically flooded by the reservoir. Like many reservoir arms, backwaters are commonly shallow, littoral habitats, but they differ from arms in various respects, including their support of primarily wetland plant assemblages that are tolerant to flooding. Elsewhere, the reservoir floods mainly upland plants that are less tolerant to flooding, producing a band of barren shoreline along the fluctuation zone. We investigated differences in relative abundance of age-0 crappies Pomoxis spp. in backwaters and arms of widely fluctuating flood control reservoirs, examined the effect of water level, and estimated the likelihood and timing with which these habitats are flooded annually. Higher catch rates of age-0 crappies were obtained in backwater habitats than in arm habitats. When inundated during the crappie spawning season, backwaters provided vegetated habitat at lower water levels than arms. Backwaters flooded earlier than arms and remained flooded longer to provide prolonged nursery habitat. Whereas vegetated habitat was inundated almost yearly in backwaters and arms, inundation that was timed to the onset of spawning occurred less regularly. Because of differences in water elevation, vegetated habitats were flooded in time for crappie spawning about every other year in backwaters but only every third year in arms. Recruitment of age-0 crappies was inversely correlated with high water levels during the months preceding the spawning period, perhaps because early flooding degraded the vegetation. Our results suggest that water levels may be managed during late winter and spring to regularly flood wetland vegetation communities in backwaters; however, water levels should be maintained at or below normal pool and should only irregularly flood upland vegetation in reservoir arms to promote the preservation of such vegetation. Furthermore, management efforts to

  1. Astaxanthin-producing green microalga Haematococcus pluvialis: from single cell to high value commercial products

    Directory of Open Access Journals (Sweden)

    Md. Mahfuzur Rahman Shah

    2016-04-01

    Full Text Available Many species of microalgae have been used as source of nutrient rich food, feed and health promoting compounds. Among the commercially important microalgae, Haematococcus pluvialis is the richest source of natural astaxanthin which is considered as super anti-oxidant. Natural astaxanthin produced by H. pluvialis has significantly greater antioxidant capacity than the synthetic one. Astaxanthin has important applications in the nutraceuticals, cosmetics, food, and aquaculture industries. Thanks to many researches it is now evident, that astaxanthin can significantly reduce free radicals and oxidative stress and help human body maintain a healthy state. With extraordinary potency and increase in demand, astaxanthin is one of the high-value microalgal products of the future. Thus, this comprehensive review summarizes the most important aspects of the biology, biochemical composition, biosynthesis and astaxanthin accumulation in the cells of H. pluvialis and its wide range of applications for humans and animals. In this paper, important and recent developments ranging from cultivation, harvest and postharvest bio-processing technologies to metabolic control and genetic engineering are reviewed in detail, focusing on biomass and astaxanthin production from this biotechnologically important microalga. Simultaneously, critical bottlenecks and major challenges in commercial scale production; current and prospective global market of H. pluvialis derived astaxanthin are also presented in a critical manner. A new biorefinery concept for H. pluvialis has been also suggested to guide towards economically sustainable approach for microalgae cultivation and processing. This report could serve as a useful guide to present current status of knowledge in the field and highlight key areas for future development of H. pluvialis astaxanthin technology and its large scale commercial implementation.

  2. A highly conserved basidiomycete peptide synthetase produces a trimeric hydroxamate siderophore.

    Science.gov (United States)

    Brandenburger, Eileen; Gressler, Markus; Leonhardt, Robin; Lackner, Gerald; Habel, Andreas; Hertweck, Christian; Brock, Matthias; Hoffmeister, Dirk

    2017-08-25

    The model white-rot basidiomycete Ceriporiopsis ( Gelatoporia ) subvermispora B encodes putative natural product biosynthesis genes. Among them is the gene for the seven-domain nonribosomal peptide synthetase CsNPS2. It is a member of the as-yet uncharacterized fungal type VI siderophore synthetase family which is highly conserved and widely distributed among the basidiomycetes. These enzymes include only one adenylation (A) domain, i.e., one complete peptide synthetase module and two thiolation/condensation (T-C) di-domain partial modules which, together, constitute an AT 1 C 1 T 2 C 2 T 3 C 3 domain setup. The full-length CsNPS2 enzyme (274.5 kDa) was heterologously produced as polyhistidine fusion in Aspergillus niger as soluble and active protein. N 5 -acetyl- N 5 -hydroxy-l-ornithine (l-AHO) and N 5 - cis -anhydromevalonyl- N 5 -hydroxy-l-ornithine (l-AMHO) were accepted as substrates, as assessed in vitro using the substrate-dependent [ 32 P]ATP-pyrophosphate radioisotope exchange assay. Full-length holo -CsNPS2 catalyzed amide bond formation between three l-AHO molecules to release the linear l-AHO trimer, called basidioferrin, as product in vitro , which was verified by LC-HRESIMS. Phylogenetic analyses suggest that type VI family siderophore synthetases are widespread in mushrooms and have evolved in a common ancestor of basidiomycetes. Importance : The basidiomycete nonribosomal peptide synthetase CsNPS2 represents a member of a widely distributed but previously uninvestigated class (type VI) of fungal siderophore synthetases. Genes orthologous to CsNPS2 are highly conserved across various phylogenetic clades of the basidiomycetes. Hence, our work serves as a broadly applicable model for siderophore biosynthesis and iron metabolism in higher fungi. Also, our results on the amino acid substrate preference of CsNPS2 supports further understanding of the substrate selectivity of fungal adenylation domains. Methodologically, this report highlights the

  3. PDX modification to produce a bean-shaped high-beta plasma

    International Nuclear Information System (INIS)

    Materna, P.; Chrzanowski, J.; Heitzenroeder, P.; Lee, K.; Pereira, M.

    1983-01-01

    Princeton's PDX tokamak is being converted to produce bean-shaped plasmas which hopefully will reach beta of 10%. The work, which is nearly complete, involves repositioning active coils, adding passive coils, and making external modifications

  4. High-power, high-brightness pseudospark-produced electron beam driven by improved pulse line accelerator

    International Nuclear Information System (INIS)

    Junbino Zhu; Mingchang Wang; Zhijiang Wang

    1995-01-01

    A high power (200KV), intense current density, low emittance (71mmmrad), high brightness (8x10 10 A/m rad) electron beam was generated in the 10cm long, high-voltage-resistive multi-gap hollow cathode pseudospark chamber filled with 15pa nitrogen and driven by an improved pulse line accelerator. The beam was ejected with the 1mm diameter, the 2.2KA beam current, and the 400ns pulse length, and could propagated 20cm in the drift tube. At a distance of 5cm from the anode it penetrated consecutively an acid-sensitive discoloring film and a 0.05mm-thick copper foil both stuck closely, left 0.6mm and 0.3mm holes on them, respectively. That 10 shots on an acid-sensitive film produced a hole of 1.6mm at 7cm downstream of anode showed its good repeatability. After 60 shots the pseudospark discharge chamber was disassembled and observed that almost no destructive damage traces left on the surfaces of its various electrodes and insulators. But on almost all the surfaces of changeable central hole parts installed on intermediate electrodes there are traces of electron emission from the sides facing the anode and of bombardment on the sides facing the cathode, in contrast with which on the front- and back-surfaces of hollow cathode no visible traces of electron emission from then was observed. In addition, there were different tints, strip-like regions on the side of anode facing the cathode. Another interesting phenomenon was that there were a set of concentric circular or elliptical ring pattern on the acid-sensitive discoloring film got at 5cm from the anode and observed tinder a metallograph. It seems that the pseudospark electron beam is Laminar beam i.e, being possessed of a multi-layer structure, at least in the case of multi-gap pseudospark discharge chamber. It was found experimentally that the quality of pseudospark electron beam is much better than that of the cold-cathode electron beam

  5. Developments in production of synthetic fuels out of Estonian shale

    Energy Technology Data Exchange (ETDEWEB)

    Aarna, Indrek

    2010-09-15

    Estonia is still the world leader in utilization of oil shale. Enefit has cooperated with Outotec to develop a new generation of solid heat carrier technology - Enefit280, which is more efficient, environmentally friendlier and has higher unit capacity. Breakeven price of oil produced in Enefit280 process is competitive with conventional oils. The new technology has advantages that allow easy adaptation to other oil shales around the world. Hydrotreated shale oil liquids have similar properties to crude oil cuts. Design for a shale oil hydrotreater unit can use process concepts, hardware components, and catalysts commercially proven in petroleum refining services.

  6. More feed efficient sheep produce less methane and carbon dioxide when eating high-quality pellets.

    Science.gov (United States)

    Paganoni, B; Rose, G; Macleay, C; Jones, C; Brown, D J; Kearney, G; Ferguson, M; Thompson, A N

    2017-09-01

    The Australian sheep industry aims to increase the efficiency of sheep production by decreasing the amount of feed eaten by sheep. Also, feed intake is related to methane production, and more efficient (low residual feed intake) animals eat less than expected. So we tested the hypothesis that more efficient sheep produce less methane by investigating the genetic correlations between feed intake, residual feed intake, methane, carbon dioxide, and oxygen. Feed intake, methane, oxygen, and carbon dioxide were measured on Merino ewes at postweaning (1,866 at 223 d old), hogget (1,010 sheep at 607 d old), and adult ages (444 sheep at 1,080 d old). Sheep were fed a high-energy grower pellet ad libitum for 35 d. Individual feed intake was measured using automated feeders. Methane was measured using portable accumulation chambers up to 3 times during this feed intake period. Heritabilities and phenotypic and genotypic correlations between traits were estimated using ASReml. Oxygen (range 0.10 to 0.20) and carbon dioxide (range 0.08 to 0.28) were generally more heritable than methane (range 0.11 to 0.14). Selecting to decrease feed intake or residual feed intake will decrease methane (genetic correlation [] range 0.76 to 0.90) and carbon dioxide ( range 0.65 to 0.96). Selecting to decrease intake ( range 0.64 to 0.78) and methane ( range 0.81 to 0.86) in sheep at postweaning age would also decrease intake and methane in hoggets and adults. Furthermore, selecting for lower residual feed intake ( = 0.75) and carbon dioxide ( = 0.90) in hoggets would also decrease these traits in adults. Similarly, selecting for higher oxygen ( = 0.69) in hoggets would also increase this trait in adults. Given these results, the hypothesis that making sheep more feed efficient will decrease their methane production can be accepted. In addition, carbon dioxide is a good indicator trait for feed intake because it has the highest heritability of the gas traits measured; is cheaper, faster, and

  7. Intermittency in multiparticle production produced by low momentum transfer at high energies

    International Nuclear Information System (INIS)

    Jang, Han Il; Jeong, Eun Mi; Kim, Jae Yool; Kim, Jae Young; Kim, Min Kyoung; Kim, Sin Joung; Kim, Tae Ick; Kim, Yeon Kyoung; Lee, Jin Ho; Lim, In Taek; Pac, Myoung Youl; Kim, Chong Oh; Bahk, Sang Yull

    1998-01-01

    We show the intermittent behavior of the distribution of the pseudo-rapidities of secondary charged particles produced by nucleus-nucleus interactions. In particular, using the modified G moments, which can be defined to suppress the statistical fluctuations, we study the intermittency in the low multiplicity processes produced by the 14.6-GeV/nucleon 28 Si - nucleus interactions. We have shown experimentally that the basic function B q,k (M), behaving as M λ(q,k) at large M, has the basic fractal behavior and that the exponent λ(q,k) depends linearly on the number of multiplicity in a bin

  8. Development of a high-titer retrovirus producer cell line capable of gene transfer into rhesus monkey hematopoietic stem cells

    International Nuclear Information System (INIS)

    Bodine, D.M.; McDonagh, K.T.; Brandt, S.J.; Ney, P.A.; Agricola, B.; Byrne, E.; Nienhuis, A.W.

    1990-01-01

    Retroviral-mediated gene transfer into primitive hematopoietic cells has been difficult to achieve in large-animal models. The authors have developed an amphotropic producer clone that generates >10 10 recombinant retroviral particles (colony-forming units) per ml of culture medium. Autologous rhesus monkey bone marrow cells were cocultured with either high or low titer producer clones for 4-6 days and reinfused into sublethally irradiated animals. The proviral genome was detected in blood and bone-marrow cells from all three animals reconstituted with cells cocultured with the high-titer producer cells. In contrast, three animals reconstituted with bone marrow cocultured with the low-titer producer clone exhibited no evidence of gene transfer

  9. High pressure low temperature hot pressing method for producing a zirconium carbide ceramic

    Science.gov (United States)

    Cockeram, Brian V.

    2017-01-10

    A method for producing monolithic Zirconium Carbide (ZrC) is described. The method includes raising a pressure applied to a ZrC powder until a final pressure of greater than 40 MPa is reached; and raising a temperature of the ZrC powder until a final temperature of less than 2200.degree. C. is reached.

  10. Genetics and genomics to improve fertility in high producing dairy cows

    NARCIS (Netherlands)

    Veerkamp, R.F.; Beerda, B.

    2007-01-01

    Improving dairy cow fertility by means of genetic selection is likely to become increasingly important, since it is now well established that declining fertility cannot only be arrested by improved management. Profit margins per kg milk produced are decreasing, therefore farmers need to reduce cost

  11. Methylobacterium sp. isolated from a Finnish paper machine produces highly pyruvated galactan exopolysaccharide.

    NARCIS (Netherlands)

    Verhoef, R.P.; Waard, de P.; Schols, H.A.; Siika-aho, M.; Voragen, A.G.J.

    2003-01-01

    The slime-forming bacterium Methylobacterium sp. was isolated from a Finnish paper machine and its exopolysaccharide (EPS) was produced on laboratory scale. Sugar compositional analysis revealed a 100% galactan (EPS). However, FT-IR showed a very strong peak at 1611 cm-1 showing the presence of

  12. Ultra-high temperature chirped fiber Bragg gratings produced by gradient stretching of viscoelastic silica.

    Science.gov (United States)

    Gao, Shaorui; Canning, John; Cook, Kevin

    2013-12-15

    By applying a suitable quadratic temperature distribution at a temperature within the viscoelastic softening region for silica, a regenerated chirped grating with bandwidth of 9.8 nm is produced from a uniform grating using post strain-tuning under load. Simulated and experimental results are in good agreement.

  13. Answering Contextually Demanding Questions: Pragmatic Errors Produced by Children with Asperger Syndrome or High-Functioning Autism

    Science.gov (United States)

    Loukusa, Soile; Leinonen, Eeva; Jussila, Katja; Mattila, Marja-Leena; Ryder, Nuala; Ebeling, Hanna; Moilanen, Irma

    2007-01-01

    This study examined irrelevant/incorrect answers produced by children with Asperger syndrome or high-functioning autism (7-9-year-olds and 10-12-year-olds) and normally developing children (7-9-year-olds). The errors produced were divided into three types: in Type 1, the child answered the original question incorrectly, in Type 2, the child gave a…

  14. Masterpieces unmasked: New high-resolution infrared cameras produce rich, detailed images of artwork, and create new controversies

    CERN Document Server

    Marshall, J

    2002-01-01

    Luca Pezzati is a physicist who heads a group called Art Diagnostics, which is a part of the Opificio delle Pietre Dure, an institute devoted to the research and conservation of artworks in Italy. Pezzati and his group use high-resolution infrared scanning device to produce colour images of what lies below the surface of paintings. Their scanner is able to produce the best-known quality of images without harming the painting under examination (1 page).

  15. Hydrogenation of Estonian oil shale and shale oil

    Energy Technology Data Exchange (ETDEWEB)

    Kogerman, P N; Kopwillem, J

    1932-01-01

    Kukersite was heated in an atmosphere of hydrogen, nitrogen, or water in three series of experiments. Shale samples were heated at 370/sup 0/ to 410/sup 0/C for 2 to 3/sup 1///sub 2/ hours in the presence of 106 to 287 kg/sq cm pressure of water, nitrogen, or hydrogen. In some experiments 5 percent of iron oxide was added to the shale. The amount of kerogen liquefied by hydrogenation was not greater than the amount of liquid products obtained by ordinary distillation. On hydrogenation, kukersite absorbed 1.8 weight-percent of hydrogen. Almost no hydrogenation took place below the decomposition point of kerogen, and the lighter decomposition products were mainly hydrogenated. Hydrogenation of the shale prevented coke formation. Heating kukersite or its crude oil at temperatures of 400/sup 0/ to 410/sup 0/C under 250 kg/sq cm hydrogen pressure produced paraffinic and naphthenic oils of lower boiling points. At higher temperatures and after long-continued heating, the formation of aromatic hydrocarbons was observed.

  16. High Gastrointestinal Colonization Rate with Extended-Spectrum β-Lactamase-Producing Enterobacteriaceae in Hospitalized Patients: Emergence of Carbapenemase-Producing K. pneumoniae in Ethiopia

    Science.gov (United States)

    Desta, Kassu; Woldeamanuel, Yimtubezinash; Azazh, Aklilu; Mohammod, Halima; Desalegn, Dawit; Shimelis, Damte; Gulilat, Dereje; Lamisso, Biruk; Makonnen, Eyasu; Worku, Alemayehu; Mannerqvist, Kerstin; Struwe, Johan; Aspevall, Olov; Aklillu, Eleni

    2016-01-01

    We investigated the gastrointestinal colonization rate and antibiotic resistance patterns of Extended-Spectrum Beta-Lactamase (ESBL)- producing Escherichia coli and Klebsiella pneumoniae in hospitalized patients admitted at Ethiopia’s largest tertiary hospital. Fecal samples/swabs from 267 patients were cultured on chrome agar. ESBL. Bacterial species identification, verification of ESBL production and antibiotic susceptibility testing were done using Vitek 2 system (bioMérieux, France). Phenotype characterization of ESBL-E.coli and ESBL- K.pneumoniae was done using Neo-Sensitabs™. ESBL positivity rate was much higher in K. pneumoniae (76%) than E. coli (45%). The overall gastrointestinal colonization rate of ESBL producing Enterobacteriaceae (ESBL-E) in hospitalized patients was 52% (95%CI; 46%–58%) of which, ESBL-E. coli and K.pneumoniae accounted for 68% and 32% respectively. Fecal ESBL-E carriage rate in neonates, children and adults was 74%, 59% and 46% respectively. Gastrointestinal colonization rate of ESBL-E.coli in neonates, children and adults was 11%, 42% and 42% respectively. Of all E. coli strains isolated from adults, children and neonates, 44%, 49% and 22% were ESBL positive (p = 0.28). The prevalence of ESBL-K.pneumoniae carriage in neonates, children and adults was 68%, 22% and 7% respectively. All K. pneumoniae isolated from neonates (100%) and 88% of K. pneumoniae isolated from children were ESBL positive, but only 50% of K.pneumoniae isolated from adults were ESBL positive (p = 0.001). Thirteen patients (5%) were carriers of both ESBL-E.coli and ESBL-KP. The overall carrier rate of ESBL producing isolates resistant to carbapenem was 2% (5/267), all detected in children; three with E.coli HL cephalosporinase (AmpC), resistant to ertapenem and two with K. pneumoniae Carbapenemase (KPC) resistant to meropenem, ertapenem and impenem. We report a high gastrointestinal colonization rate with ESBL-E and the emergence of carbapenems-resistant K

  17. Whole-word frequency and inflectional paradigm size facilitate Estonian case-inflected noun processing.

    Science.gov (United States)

    Lõo, Kaidi; Järvikivi, Juhani; Baayen, R Harald

    2018-06-01

    Estonian is a morphologically rich Finno-Ugric language with nominal paradigms that have at least 28 different inflected forms but sometimes more than 40. For languages with rich inflection, it has been argued that whole-word frequency, as a diagnostic of whole-word representations, should not be predictive for lexical processing. We report a lexical decision experiment, showing that response latencies decrease both with frequency of the inflected form and its inflectional paradigm size. Inflectional paradigm size was also predictive of semantic categorization, indicating it is a semantic effect, similar to the morphological family size effect. These findings fit well with the evidence for frequency effects of word n-grams in languages with little inflectional morphology, such as English. Apparently, the amount of information on word use in the mental lexicon is substantially larger than was previously thought. Copyright © 2018 Elsevier B.V. All rights reserved.

  18. Determination of Heating Value of Estonian Oil Shale by Laser-Induced Breakdown Spectroscopy

    Directory of Open Access Journals (Sweden)

    M. Aints

    2018-01-01

    Full Text Available The laser-induced breakdown spectroscopy (LIBS combined with multivariate regression analysis of measured data were utilised for determination of the heating value and the chemical composition of pellets made from Estonian oil shale samples with different heating values. The study is the first where the oil shale heating value is determined on the basis of LIBS spectra. The method for selecting the optimal number of spectral lines for ordinary multivariate least squares regression model is presented. The correlation coefficient between the heating value predicted by the regression model, and that measured by calorimetric bomb, was R2=0.98. The standard deviation of prediction was 0.24 MJ/kg. Concentrations of oil shale components predicted by the regression model were compared with those measured by ordinary methods.

  19. Taxes, Estonian state budget and economic crises. Maksud, riigi eelarve ja majanduskriis

    Directory of Open Access Journals (Sweden)

    Olev Raju

    2013-01-01

    Full Text Available Recession has sharply erected the question of tax burden and the optimal proportion of different kinds of taxes among the incomes of the budget. Indirect taxes and consumption taxes, which proportion is different according to different methodologies, dominate in Estonian state budget. The buoyancy of a tax system based on taxes of that kind is especially weak during the recession. Difficulties concerning the incomes of budget have arisen the necessity for lifting taxes, which is possible as the tax burden is low now. But a sharp question of the optimal level of taxes is going to be raised. A formula for indirect tax optimum according to Ramsey taxes and Slutski decomposition has been proposed in the article.

  20. Conceptual co-presence of motion and emotion in the Estonian terms of personality

    Directory of Open Access Journals (Sweden)

    Heili Orav

    2010-05-01

    Full Text Available The purpose of the study was to find out whether the conceptual connection of emotion and motion is holding in the domain of personality traits. In a quantitative study 40 Estonian terms of personality traits were investigated and a conclusion was driven that, indeed, the qualities of emotionality and motion are perceived as co-present characteristics. In further data analysis some visualized measures were applied in order to get further insights into the hidden structure of the data. The self-organizing map (SOM analysis revealed an additional dimension of axiological evaluations present in the semantics and the SOM meta-analysis technique revealed groups of near synonymous words as well as gave overview of the more general structure common in the two data sets. The latter was tentatively explained by the person’s habitual level of activation.DOI: http://dx.doi.org/10.5128/ERYa6.21

  1. Observation of transient lattice vacancies produced during high-energy ion irradiation of Ni foils

    International Nuclear Information System (INIS)

    Tsuchida, Hidetsugu; Iwai, Takeo; Awano, Misa; Kishida, Mutsumi; Katayama, Ichiro; Jeong, Sun-Chang; Ogawa, Hidemi; Sakamoto, Naoki; Komatsu, Masao; Itoh, Akio

    2007-01-01

    Real-time positron annihilation spectroscopy has been applied for the first time for the investigation of lattice vacancies produced during ion irradiation. Measurements were performed for thin nickel foils irradiated with 2.5 MeV C ions. Doppler broadenings of positron annihilation γ-rays were measured alternately during beam-on and beam-off conditions. It was found that the Doppler broadening line-shape parameter measured during irradiation is larger than those obtained before and after irradiation. This evidently implies that transient or non-survivable vacancy defects are produced during ion irradiation. On the other hand, no such significant change in the line-shape parameter was observed for other face-centred-cubic metal forms of aluminium

  2. Thermal damage produced by high-irradiance continuous wave CO2 laser cutting of tissue.

    Science.gov (United States)

    Schomacker, K T; Walsh, J T; Flotte, T J; Deutsch, T F

    1990-01-01

    Thermal damage produced by continuous wave (cw) CO2 laser ablation of tissue in vitro was measured for irradiances ranging from 360 W/cm2 to 740 kW/cm2 in order to investigate the extent to which ablative cooling can limit tissue damage. Damage zones thinner than 100 microns were readily produced using single pulses to cut guinea pig skin as well as bovine cornea, aorta, and myocardium. Multiple pulses can lead to increased damage. However, a systematic decrease in damage with irradiance, predicted theoretically by an evaporation model of ablation, was not observed. The damage-zone thickness was approximately constant around the periphery of the cut, consistent with the existence of a liquid layer which stores heat and leads to tissue damage, and with a model of damage and ablation recently proposed by Zweig et al.

  3. Linking Quality Assurance to Performance Improvement to Produce a High Reliability Organization

    International Nuclear Information System (INIS)

    Silvey, Andrea B.; Warrick, Louise H.

    2008-01-01

    Three basic change management models are currently used in healthcare to produce and sustain quality improvement. We have presented the context to determine where any particular organization stands within these paradigms. We also have introduced a change-management tool used to assess, plan, and monitor leadership effort and commitment to quality improvement and culture change activities, tracked as 'momentum for change.' This 'momentum' is measured at eight discrete levels, from recognizing a performance gap to officially implementing changes intended to improve quality

  4. Electron beam producing system for very high acceleration voltages and beam powers

    International Nuclear Information System (INIS)

    Andelfinger, C.; Dommaschk, W.; Ott, W.; Ulrich, M.; Weber, G.

    1975-01-01

    An electron beam producing system for acceleration voltages on the order of megavolts and beam powers on the order of gigawatts is described. A tubular housing of insulating material is used, and adjacent to its one closed end, a field emission cathode with a large surface area is arranged, while at its other end, from which the electron beam emerges, an annular anode is arranged. The device for collimating the electron beam consists of annular electrodes. (auth)

  5. A low-cost, high-yield fabrication method for producing optimized biomimetic dry adhesives

    International Nuclear Information System (INIS)

    Sameoto, D; Menon, C

    2009-01-01

    We present a low-cost, large-scale method of fabricating biomimetic dry adhesives. This process is useful because it uses all photosensitive polymers with minimum fabrication costs or complexity to produce molds for silicone-based dry adhesives. A thick-film lift-off process is used to define molds using AZ 9260 photoresist, with a slow acting, deep UV sensitive material, PMGI, used as both an adhesion promoter for the AZ 9260 photoresist and as an undercutting material to produce mushroom-shaped fibers. The benefits to this process are ease of fabrication, wide range of potential layer thicknesses, no special surface treatment requirements to demold silicone adhesives and easy stripping of the full mold if process failure does occur. Sylgard® 184 silicone is used to cast full sheets of biomimetic dry adhesives off 4'' diameter wafers, and different fiber geometries are tested for normal adhesion properties. Additionally, failure modes of the adhesive during fabrication are noted and strategies for avoiding these failures are discussed. We use this fabrication method to produce different fiber geometries with varying cap diameters and test them for normal adhesion strengths. The results indicate that the cap diameters relative to post diameters for mushroom-shaped fibers dominate the adhesion properties

  6. Change in medical plant use in Estonian ethnomedicine: a historical comparison between 1888 and 1994.

    Science.gov (United States)

    Sõukand, Renata; Kalle, Raivo

    2011-05-17

    The aim of this paper is to compare the changes in the utilization of species from various hemeroby categories (indicating the degree of sensitivity of the plant to human impact) using historical data concerning the years 1888-1994. The authors digitised 8808 handwritten reports, reflecting local ethnopharmacological knowledge from 8 selected collections from the Estonian Folklore Archives of the Estonian Literary Museum. They were semi-quantitatively analyzed according to the sensitivity to human impact of 540 taxa that could possibly be related to the plant vernacular names given in the reports. Although in different periods of time the number of ethnopharmacologically used plants has changed, the proportion of plants utilized from each group has remained relatively same, consisting on average of: 23% anthropophytes, 42% apophytes, 32% hemeradiaphores and 3% hemerophobes. Comparison of the application of the most used plants revealed considerable changes of plant utilization, in which the varied use of the most popular anthropophytes increased and the applied scope of the most popular hemeradiaphores and hemerophobes decreased almost by twofold in one century. Case studies on seven taxa are presented, of them, use of Allium sativum L., Aesculus hippocastanum L. and Mentha xpiperita L. increased, whereas the use of Hordeum L., Orchidaceae, Paris quadrifolia L. and Briza media L. decreased greatly. This research contributes to the better understanding of the cognitive and human ecological concepts underlying the use of medicinal plants in Estonia. Strong increase in the ethnomedical utilization of plants depending on human influence, and a decrease in the use of taxa that do not prefer human activities indicates that, despite some of the population still have access to natural resources and diverse knowledge of the medical use of plants, the majority relies on a very narrow selection and a rather restricted herbal landscape. Copyright © 2011 Elsevier Ireland Ltd

  7. Fatal Babesia canis canis infection in a splenectomized Estonian dog.

    Science.gov (United States)

    Tiškina, Valentina; Capligina, Valentina; Must, Külli; Berzina, Inese; Ranka, Renate; Jokelainen, Pikka

    2016-01-25

    A previously splenectomized dog from Estonia was presented with a sudden lack of appetite and discoloration of the urine. Despite supportive therapy, its condition deteriorated dramatically during 1 day. Severe thrombocytopenia and high numbers of protozoan hemoparasites were evident in blood smears, and the hematocrit dropped from 46 to 33 %. The dog was euthanized before specific antibabesial treatment was initiated. Blood samples from the dog and from two other dogs in the same household tested positive for Babesia using molecular methods, and the sequences of partial 18S rRNA gene confirmed the causative species as Babesia canis canis. The risk of severe, rapidly progressing babesiosis in splenectomized dogs merits awareness.

  8. New approach to increasing rice lodging resistance and biomass yield through the use of high gibberellin producing varieties.

    Directory of Open Access Journals (Sweden)

    Ayako Okuno

    Full Text Available Traditional breeding for high-yielding rice has been dependent on the widespread use of fertilizers and the cultivation of gibberellin (GA-deficient semi-dwarf varieties. The use of semi-dwarf plants facilitates high grain yield since these varieties possess high levels of lodging resistance, and thus could support the high grain weight. Although this approach has been successful in increasing grain yield, it is desirable to further improve grain production and also to breed for high biomass. In this study, we re-examined the effect of GA on rice lodging resistance and biomass yield using several GA-deficient mutants (e.g. having defects in the biosynthesis or perception of GA, and high-GA producing line or mutant. GA-deficient mutants displayed improved bending-type lodging resistance due to their short stature; however they showed reduced breaking-type lodging resistance and reduced total biomass. In plants producing high amounts of GA, the bending-type lodging resistance was inferior to the original cultivars. The breaking-type lodging resistance was improved due to increased lignin accumulation and/or larger culm diameters. Further, these lines had an increase in total biomass weight. These results show that the use of rice cultivars producing high levels of GA would be a novel approach to create higher lodging resistance and biomass.

  9. New approach to increasing rice lodging resistance and biomass yield through the use of high gibberellin producing varieties.

    Science.gov (United States)

    Okuno, Ayako; Hirano, Ko; Asano, Kenji; Takase, Wakana; Masuda, Reiko; Morinaka, Yoichi; Ueguchi-Tanaka, Miyako; Kitano, Hidemi; Matsuoka, Makoto

    2014-01-01

    Traditional breeding for high-yielding rice has been dependent on the widespread use of fertilizers and the cultivation of gibberellin (GA)-deficient semi-dwarf varieties. The use of semi-dwarf plants facilitates high grain yield since these varieties possess high levels of lodging resistance, and thus could support the high grain weight. Although this approach has been successful in increasing grain yield, it is desirable to further improve grain production and also to breed for high biomass. In this study, we re-examined the effect of GA on rice lodging resistance and biomass yield using several GA-deficient mutants (e.g. having defects in the biosynthesis or perception of GA), and high-GA producing line or mutant. GA-deficient mutants displayed improved bending-type lodging resistance due to their short stature; however they showed reduced breaking-type lodging resistance and reduced total biomass. In plants producing high amounts of GA, the bending-type lodging resistance was inferior to the original cultivars. The breaking-type lodging resistance was improved due to increased lignin accumulation and/or larger culm diameters. Further, these lines had an increase in total biomass weight. These results show that the use of rice cultivars producing high levels of GA would be a novel approach to create higher lodging resistance and biomass.

  10. Variability in fluence and spectrum of high-energy photon bursts produced by lightning leaders

    OpenAIRE

    Celestin , Sebastien; Xu , Wei; Pasko , Victor P.

    2015-01-01

    International audience; In this paper, we model the production and acceleration of thermal runaway electrons during negative corona flash stages of stepping lightning leaders and the corresponding terrestrial gamma ray flashes (TGFs) or negative cloud-to-ground (−CG) lightning-produced X-ray bursts in a unified fashion. We show how the source photon spectrum and fluence depend on the potential drop formed in the lightning leader tip region during corona flash and how the X-ray burst spectrum ...

  11. High-resolution γ-ray spectroscopy of hyperfragments produced by stopped K- reactions

    International Nuclear Information System (INIS)

    Miwa, K.; Tanida, K.; Akikawa, H.; Fukao, Y.; Hiyama, E.; Hotchi, H.; Imai, K.; Miura, Y.; Mizunuma, K.; Nakamura, S.N.; Niiyama, M.; Ota, S.; Saha, P.K.; Takahashi, H.; Takahashi, T.; Tamura, H.; Terashima, S.; Togawa, M.; Ukai, M.

    2005-01-01

    We performed an experiment to measure γ rays of hyperfragments produced by stopped K- reactions on light (A= 1/2+) in 7 Λ Li with 10 B, 11 B and 12 C targets and obtained the γ-ray intensity to be (7.5+/-1.6)x10-4 per stopped K- for 10 B target. In addition, a candidate for a new hypernuclear γ ray was observed. These results show that this method is quite suitable for the systematic study of hypernuclei

  12. Energy intensities and the impact of high energy prices on producing and consuming sectors in Malaysia

    OpenAIRE

    Klinge Jacobsen, Henrik

    2007-01-01

    The increase in oil prices has put pressure on the global economy. Even economies that have a high degree of self-sufficiency concerning oil products are experiencing rising production costs and price increases for households energy use. Therefore, changes in energy policies are under consideration for countries highly dependent on imported energy as well as countries with a high degree of self-sufficiency. Examination of dependence on cheap energy sources for economic growth in different...

  13. Energy intensities and the impact of high energy prices on producing and consuming sectors in Malaysia

    OpenAIRE

    Klinge Jacobsen, Henrik

    2007-01-01

    The increase in oil prices has put pressure on the global economy. Even economies that have a high degree of self-sufficiency concerning oil products are experiencing rising production costs and price increases for households energy use. Therefore, changes in energy policies are under consideration for countries highly dependent on imported energy as well as countries with a high degree of self-sufficiency. Examination of dependence on cheap energy sources for economic growth in different eco...

  14. Picosecond high power laser systems and picosecond diagnostic technique in laser produced plasma

    International Nuclear Information System (INIS)

    Kuroda, Hiroto; Masuko, H.; Maekawa, Shigeru; Suzuki, Yoshiji; Sugiyama, Masaru.

    1979-01-01

    Highly repetitive, high power YAG and Glass laser systems have been developed and been successfully used for the studies of laser-plasma interactions. Various picosecond diagnostic techniques have been developed for such purposes in the regions from optical to X-ray frequency. Recently highly sensitive X-ray (1 - 10 KeV) streak camera for highly repetitive operations have been developed. Preliminary experiment shows the achievement of 28ps temporal resolution (100μm slit) and good sensitivity with detectable minimum number of 10E3-1KeV photons/shot/slit area. (author)

  15. Process for producing silicon nitride based articles of high fracture toughness and strength

    Science.gov (United States)

    Huckabee, M.; Buljan, S.T.; Neil, J.T.

    1991-09-10

    A process for producing a silicon nitride-based article of improved fracture toughness and strength is disclosed. The process involves densifying to at least 98% of theoretical density a mixture including (a) a bimodal silicon nitride powder blend consisting essentially of about 10-30% by weight of a first silicon nitride powder of an average particle size of about 0.2 [mu]m and a surface area of about 8-12 m[sup 2]/g, and about 70-90% by weight of a second silicon nitride powder of an average particle size of about 0.4-0.6 [mu]m and a surface area of about 2-4 m[sup 2]/g, (b) about 10-50 percent by volume, based on the volume of the densified article, of refractory whiskers or fibers having an aspect ratio of about 3-150 and having an equivalent diameter selected to produce in the densified article an equivalent diameter ratio of the whiskers or fibers to grains of silicon nitride of greater than 1.0, and (c) an effective amount of a suitable oxide densification aid. Optionally, the mixture may be blended with a binder and injection molded to form a green body, which then may be densified by, for example, hot isostatic pressing.

  16. Isolation and evaluation of a high H{sub 2}-producing lab isolate from cow dung

    Energy Technology Data Exchange (ETDEWEB)

    Pandey, Anjana; Sinha, Pallavi [Nanotechnology and Molecular Biology Lab, Department of Biotechnology, University of Allahabad, Allahabad-211002, Uttar Pradesh (India); Kotay, Shireen Meher; Das, Debabrata [Department of Biotechnology, Indian Institute of Technology, Kharagpur-721302, West Bengal (India)

    2009-09-15

    Hydrogen producing bacterial strain was isolated from Indian cow dung and identified of the bacterial family Enterobacteriaceae. This lab isolate was differentiated from Citrobacter Y-19 at molecular level by using RAPD, PCR based technique, and OPO-03{sub 460} and OPO-17{sub 800} RAPD marker for this specific strain (lab isolate) was identified. Fermentative studies were investigated for important parameters, starting with pH of the culture, temperature, inoculum age and inoculum volume, initial substrate concentration and different substrates. Among different substrates, dextrose and sucrose were the preferred substrates for hydrogen production. The optimal starting pH of the culture was found to be 5.0. The H{sub 2} production increased with increase in temperature up to 30 C. The maximum value of H{sub 2} production was recorded when inoculum volume was 12.5% of the culture broth and inoculum age was 14 h. Under batch fermentation conditions, the maximum hydrogen production rate and yield were 355.2 ml l{sup -1} h{sup -1} and 2.1 mol/mol glucose (conversion 35%), respectively. These results indicate that this lab isolate is an ideal hydrogen producer. (author)

  17. Genetic segregation in a high-yielding streptomycin-producing strain of Streptomyces griseus.

    Science.gov (United States)

    Roth, M; Schwalenberg, B; Reiche, R; Noack, D; Geuther, R; Eritt, I

    1982-01-01

    The streptomycin-producing Streptomyces griseus HP spontaneously segregated non-reverting derivatives with altered phenotypes. Clones characterized by increased spore formation and decreased streptomycin production were found. Two other types of derivatives were defective in aerial mycelium and streptomycin formation as well, but differed in the capacity to synthesize a yellow pigment. These derivatives were examined with respect to further properties. The stability of S. griseus HP was investigated in relation to conditions of continuous culture. Both at 26 and 30 degrees C, under glycerol and NH4Cl limitation a rapid segregation and enrichment of streptomycin-non-producing derivatives occurred. At 34 degrees C and glycerol limitation segregation began only after about 35 generations of continuous culture. In NH4Cl-limited chemostats the original strain was stable during 80 generations. In the course of the continuous culture experiments it was shown that the onset of genetic segregation within mycelia can be detected before it becomes obvious in colonies grown from the mycelia. This was achieved by fractionation of the mycelia by protoplast formation and subsequent plating on regeneration medium allowing colony growth and differentiation.

  18. Methylobacterium sp. isolated from a Finnish paper machine produces highly pyruvated galactan exopolysaccharide.

    Science.gov (United States)

    Verhoef, René; de Waard, Pieter; Schols, Henk A; Siika-aho, Matti; Voragen, Alphons G J

    2003-09-01

    The slime-forming bacterium Methylobacterium sp. was isolated from a Finnish paper machine and its exopolysaccharide (EPS) was produced on laboratory scale. Sugar compositional analysis revealed a 100% galactan (EPS). However, FT-IR showed a very strong peak at 1611 cm(-1) showing the presence of pyruvate. Analysis of the pyruvate content revealed that, based on the sugar composition, the EPS consists of a trisaccharide repeating unit consisting of D-galactopyranose and [4,6-O-(1-carboxyethylidene)]-D-galactopyranose with a molar ratio of 1:2, respectively. Both linkage analysis and 2D homo- and heteronuclear 1H and 13C NMR spectroscopy revealed the following repeating unit: -->3)-[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)[4,6-O-(1-carboxyethylidene)]-alpha-D-Galp-(1-->3)-alpha-D-Galp-(1-->. By enrichment cultures from various ground and compost heap samples a polysaccharide-degrading culture was obtained that produced an endo acting enzyme able to degrade the EPS described. The enzyme hydrolysed the EPS to a large extent, releasing oligomers that mainly consisted out of two repeating units.

  19. Some interesting features of charged particles produced in high-energy hadron-emulsion collisions

    International Nuclear Information System (INIS)

    Khushnood, H.; Ansari, A.R.

    1990-01-01

    The emission characteristics of secondary charged particles produced in 400 GeV proton-emulsion interactions were compared with those obtained at other energies. The results revealed that the angular distribution of grey particles does not depend on the nature and energy of the projectile. The dependence of the average multiplicity of the grey, black, shower, and heavily ionizing tracks on the mass of the target nucleus (A) and the nature and energy of the projectiles are also examined. The ratio of the valance quarks in pions (π - ) and protons (p) was found to be almost equal to the ratio of the grey particles produced in π - -A and p-A collisions at the same energy. The values of the normalized moments of the multiplicity distributions of charged shower particles in different N h intervals were found to nearly the same. However, this value increased with increasing values of the moment index, K. Finally, the values of the normalized and central moments were almost equal for both p-p and p-A interactions

  20. Catalysts for producing high octane-blending value olefins for gasoline

    NARCIS (Netherlands)

    Golombok, M.; Bruijn, de J.N.H.

    2001-01-01

    New restrictions on gasoline components mean that oxygenates and aromatics must be replaced by other high octane components. The dimerization of linear butene to form high octane gasoline blending components is evaluated under liquid phase reaction conditions over a number of different heterogeneous

  1. Smoking prevalence and attitudes towards smoking among Estonian physicians: results from cross-sectional studies in 2002 and 2014

    OpenAIRE

    Põld, Mariliis; Pärna, Kersti

    2017-01-01

    Objectives To explore smoking prevalence and attitudes towards smoking among Estonian physicians in 2002 and 2014. Design Two self-administered cross-sectional postal surveys were conducted among practising physicians in Estonia. Participants Initial sample consisted of all practising physicians in Estonia. The corrected response rate was 67.8% in 2002 and 53.1% in 2014. Present study sample was restricted to physicians younger than 65 years (n=2549 in 2002, n=2339 in 2014). Methods Age-stand...

  2. The Prevalence of Helicobacter pylori in Estonian Bariatric Surgery Patients

    Directory of Open Access Journals (Sweden)

    Natalja Šebunova

    2018-01-01

    Full Text Available Helicobacter pylori (Hp is one of the most important human pathogens that can cause duodenal and gastric ulcers, gastritis and stomach cancer. Hp infection is considered to be a cause of limiting access to bariatric surgery. The aim of this study was to determine the prevalence of Hp in patients with obesity going into bariatric surgery and to reveal the relationship between Hp and clinical data. The study group was formed of 68 preoperative bariatric surgery patients (body mass index (BMI 44.7 ± 4.8. Gastric biopsies (antrum and corpus were used for histological and molecular (caqA and glmM genes examinations. The PCR method revealed Hp infection in 64.7% of obese patients that is higher in comparison with histological analysis (55.9%. The prevalence of cagA and glmM genes in antrum mucosa was 45.6% and 47.0% while in the corpus it was 41.2% and 38.3%, respectively. The coincidence of both cagA and glmM virulence genes in the antrum and corpus mucosa was 33.8% and 22.1%, respectively. Either of the genes was found in 58.8% of antrum and 57.3% of corpus mucosa. Presence of caqA and glmM genes was in association with active and atrophic chronic gastritis. In conclusion, our study demonstrated that two thirds of morbidly obese patients undergoing bariatric surgery are infected with Hp and have a high prevalence of cagA and glmM virulence genes that points out the necessity for diagnostics and treatment of this infection before surgery.

  3. Mineral-produced high-pressure striae and clay polish: Key evidence for nonballistic transport of ejecta from Ries crater

    Science.gov (United States)

    Chao, E.C.T.

    1976-01-01

    Recently discovered mineral-produced, deeply incised striae and mirror-like polish on broken surfaces of limestone fragments from the sedimentary ejecta of the Ries impact crater of southern Germany are described. The striae and polish were produced under high confining pressures during high-velocity nonballistic transport of the ejecta mass within the time span of the cratering event (measured in terms of seconds). The striae on these fragments were produced by scouring by small mineral grains embedded in the surrounding clay matrix, and the polish was formed under the same condition, by movements of relatively fragment-free clay against the fragment surfaces. The occurrence of these striae and polish is key evidence for estimating the distribution and determining the relative importance of nonballistic and ballistic transport of ejecta from the shallow Ries stony meteorite impact crater.

  4. The maximum percentage of fly ash to replace part of original Portland cement (OPC) in producing high strength concrete

    Science.gov (United States)

    Mallisa, Harun; Turuallo, Gidion

    2017-11-01

    This research investigates the maximum percent of fly ash to replace part of Orginal Portland Cement (OPC) in producing high strength concrete. Many researchers have found that the incorporation of industrial by-products such as fly ash as in producing concrete can improve properties in both fresh and hardened state of concrete. The water-binder ratio was used 0.30. The used sand was medium sand with the maximum size of coarse aggregate was 20 mm. The cement was Type I, which was Bosowa Cement produced by PT Bosowa. The percentages of fly ash to the total of a binder, which were used in this research, were 0, 10, 15, 20, 25 and 30%; while the super platicizer used was typed Naptha 511P. The results showed that the replacement cement up to 25 % of the total weight of binder resulted compressive strength higher than the minimum strength at one day of high-strength concrete.

  5. Comparison of Biochemical Activities between High and Low Lipid-Producing Strains of Mucor circinelloides: An Explanation for the High Oleaginicity of Strain WJ11.

    Directory of Open Access Journals (Sweden)

    Xin Tang

    Full Text Available The oleaginous fungus, Mucor circinelloides, is one of few fungi that produce high amounts of γ-linolenic acid (GLA; however, it usually only produces <25% lipid. Nevertheless, a new strain (WJ11 isolated in this laboratory can produce lipid up to 36% (w/w cell dry weight (CDW. We have investigated the potential mechanism of high lipid accumulation in M. circinelloides WJ11 by comparative biochemical analysis with a low lipid-producing strain, M. circinelloides CBS 277.49, which accumulates less than 15% (w/w lipid. M. circinelloides WJ11 produced more cell mass than that of strain CBS 277.49, although with slower glucose consumption. In the lipid accumulation phase, activities of glucose-6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase in strain WJ11 were greater than in CBS 277.49 by 46% and 17%, respectively, and therefore may provide more NADPH for fatty acid biosynthesis. The activities of NAD+:isocitrate dehydrogenase and NADP+:isocitrate dehydrogenase, however, were 43% and 54%, respectively, lower in WJ11 than in CBS 277.49 and may retard the tricarboxylic acid cycle and thereby provide more substrate for ATP:citrate lyase (ACL to produce acetyl-CoA. Also, the activities of ACL and fatty acid synthase in the high lipid-producing strain, WJ11, were 25% and 56%, respectively, greater than in strain CBS 277.49. These enzymes may therefore cooperatively regulate the fatty acid biosynthesis in these two strains.

  6. Comparison of Biochemical Activities between High and Low Lipid-Producing Strains of Mucor circinelloides: An Explanation for the High Oleaginicity of Strain WJ11.

    Science.gov (United States)

    Tang, Xin; Chen, Haiqin; Chen, Yong Q; Chen, Wei; Garre, Victoriano; Song, Yuanda; Ratledge, Colin

    2015-01-01

    The oleaginous fungus, Mucor circinelloides, is one of few fungi that produce high amounts of γ-linolenic acid (GLA); however, it usually only produces <25% lipid. Nevertheless, a new strain (WJ11) isolated in this laboratory can produce lipid up to 36% (w/w) cell dry weight (CDW). We have investigated the potential mechanism of high lipid accumulation in M. circinelloides WJ11 by comparative biochemical analysis with a low lipid-producing strain, M. circinelloides CBS 277.49, which accumulates less than 15% (w/w) lipid. M. circinelloides WJ11 produced more cell mass than that of strain CBS 277.49, although with slower glucose consumption. In the lipid accumulation phase, activities of glucose-6-phosphate dehydrogenase and 6-phosphogluconate dehydrogenase in strain WJ11 were greater than in CBS 277.49 by 46% and 17%, respectively, and therefore may provide more NADPH for fatty acid biosynthesis. The activities of NAD+:isocitrate dehydrogenase and NADP+:isocitrate dehydrogenase, however, were 43% and 54%, respectively, lower in WJ11 than in CBS 277.49 and may retard the tricarboxylic acid cycle and thereby provide more substrate for ATP:citrate lyase (ACL) to produce acetyl-CoA. Also, the activities of ACL and fatty acid synthase in the high lipid-producing strain, WJ11, were 25% and 56%, respectively, greater than in strain CBS 277.49. These enzymes may therefore cooperatively regulate the fatty acid biosynthesis in these two strains.

  7. Reconstruction of semileptonically decaying beauty hadrons produced in high energy pp collisions

    Energy Technology Data Exchange (ETDEWEB)

    Ciezarek, G. [Nikhef,Science Park 105, 1098 XG Amsterdam (Netherlands); Lupato, A. [INFN Padova,Viale dell’Università, 2, 35020 Legnaro PD (Italy); Rotondo, M. [Laboratori Nazionali di Frascati,Via Enrico Fermi, 40, 00044 Frascati RM (Italy); Vesterinen, M. [Physicalisches Institute Heidelberg,Klaus-Tschira-Gebäude, Im Neuenheimer Feld 226, 69120 Heidelberg (Germany)

    2017-02-06

    It is well known that in b-hadron decays with a single unreconstructible final state particle, the decay kinematics can be solved up to a quadratic ambiguity, without any knowledge of the b-hadron momentum. We present a method to infer the momenta of b-hadrons produced in hadron collider experiments using information from their reconstructed flight vectors. Our method is strictly agnostic to the decay itself, which implies that it can be validated with control samples of topologically similar decays to fully reconstructible final states. A multivariate regression algorithm based on the flight information provides a b-hadron momentum estimate with a resolution of around 60% which is sufficient to select the correct solution to the quadratic equation in around 70% of cases. This will improve the ability of hadron collider experiments to make differential decay rate measurements with semileptonic b-hadron decays.

  8. High-dose dextromethorphan produces myelinoid bodies in the hippocampus of rats

    Directory of Open Access Journals (Sweden)

    Hai-Quyen Tran

    2016-10-01

    Full Text Available Dextromethorphan (DM administered at supra-antitussive doses produce psychotoxic and neurotoxic effects in humans. We administered DM (80 mg/kg to rats intraperitoneally to determine the ultrastructural change induced by DM, because intraperitoneal route is sensitive for the behavioral responses. Treatment with DM resulted in mitochondrial dysfunction and formation of myelinoid bodies in the hippocampus. MK-801 [(+-5-methyl-10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5,10-imine maleate] attenuated DM-induced cytosolic oxidative burdens. However, neither MK-801 nor naloxone affected DM-induced mitochondrial dysfunction and formation of myelinoid bodies, indicating that the neurotoxic mechanism needs to be further elucidated. Therefore, the spectrum of toxicological effects associated with DM need to be reassessed.

  9. X-ray spectral line shapes for the excimer-laser-produced high density plasma diagnostics

    International Nuclear Information System (INIS)

    Magunov, A.; Faenov, A.; Skobelev, I.; Pikuz, T.; Batani, D.; Milani, M.; Conti, A.; Masini, A.; Costato, M.; Pozzi, A.; Turcu, E.; Allot, R.; Lisi, N.; Koenig, M.; Benuzzi, A.; Flora, F.; Letardi, T.; Palladino, L.; Reale, A.

    1997-01-01

    The time and space-integrated emission spectra measurements have been performed in plasma produced by 308 nm wavelength XeCl laser radiation (I L =(4-10)·10 12 W/cm 2 , τ=10 ns) and by 248 nm wavelength KrF laser pulse train radiation (I L =5·10 15 W/cm 2 , τ=7 ps, 16 pulses in train) on CF n plane target. The lines' shapes and intensities modeling of Lyman series and He-like ion resonance series of fluorine up to n=7 by fitting experimental data shows the considerable difference of plasma formation features for these two sets of the laser pulse parameters

  10. High-dose dextromethorphan produces myelinoid bodies in the hippocampus of rats.

    Science.gov (United States)

    Tran, Hai-Quyen; Chung, Yoon Hee; Shin, Eun-Joo; Kim, Won Ki; Lee, Jae-Chul; Jeong, Ji Hoon; Wie, Myung Bok; Jang, Choon-Gon; Yamada, Kiyofumi; Nabeshima, Toshitaka; Kim, Hyoung-Chun

    2016-10-01

    Dextromethorphan (DM) administered at supra-antitussive doses produce psychotoxic and neurotoxic effects in humans. We administered DM (80 mg/kg) to rats intraperitoneally to determine the ultrastructural change induced by DM, because intraperitoneal route is sensitive for the behavioral responses. Treatment with DM resulted in mitochondrial dysfunction and formation of myelinoid bodies in the hippocampus. MK-801 [(+)-5-methyl-10,11-dihydro-5H-dibenzo[a,d]cyclohepten-5,10-imine maleate] attenuated DM-induced cytosolic oxidative burdens. However, neither MK-801 nor naloxone affected DM-induced mitochondrial dysfunction and formation of myelinoid bodies, indicating that the neurotoxic mechanism needs to be further elucidated. Therefore, the spectrum of toxicological effects associated with DM need to be reassessed. Copyright © 2016 The Authors. Production and hosting by Elsevier B.V. All rights reserved.

  11. Anisotropy in angular distributions of 238U fission fragments by photons, produced in high energy electron interaction with Si monocrystal

    International Nuclear Information System (INIS)

    Kasilov, V.I.; Lapin, N.N.

    1981-01-01

    An enhancement is detected under the angle of 90 deg in the fission fragment yield from 238 U nuclei produced by photons emitted by high-energy electrons passing through a silicon monocrystal. The results enable one to select the most optimal conditions to obtain maximal yields of nuclear particles [ru

  12. Detection systems for high energy particle producing gaseous ionization; Sistemas de deteccion de particulas de alta energia mediante ionizacion gaseosa

    Energy Technology Data Exchange (ETDEWEB)

    Martinez, L; Duran, I

    1985-07-01

    This report contains a review on the most used detectors based on the collection of the ionization produced by high energy particles: proportional counters, multiwire proportional chambers, Geiger-Muller counters and drift chambers. In six sections, the fundamental principles, the field configuration and useful gas mixtures, are discussed, most relevant devices are reported along 90 pages with 98 references. (Author) 98 refs.

  13. Inactivation of a diverse set of shiga toxin-producing Escherichia coli in ground beef by high pressure processing

    Science.gov (United States)

    Shiga Toxin-Producing Escherichia coli (STEC) are frequently implicated in foodborne illness outbreaks and recalls of ground beef. In this study we determined the High Pressure Processing (HPP) D-10 value (the processing conditions needed to reduce the microbial population by 1 log) of 39 individua...

  14. Topochemical approach to efficiently produce main-chain poly(bile acid)s with high molecular weights.

    Science.gov (United States)

    Li, Weina; Li, Xuesong; Zhu, Wei; Li, Changxu; Xu, Dan; Ju, Yong; Li, Guangtao

    2011-07-21

    Based on a topochemical approach, a strategy for efficiently producing main-chain poly(bile acid)s in the solid state was developed. This strategy allows for facile and scalable synthesis of main-chain poly(bile acid)s not only with high molecular weights, but also with quantitative conversions and yields.

  15. Gene expression patterns in the ventral tegmental area relate to oestrus behaviour in high-producing dairy cows

    NARCIS (Netherlands)

    Wyszynska-Koko, J.; Wit, de A.A.C.; Beerda, B.; Veerkamp, R.F.; Pas, te M.F.W.

    2011-01-01

    Reduced oestrus behaviour expression or its absence (silent oestrus) results in subfertility in high-producing dairy cows. Insight into the genomic regulation of oestrus behaviour is likely to help alleviate reproduction problems. Here, gene expression was recorded in the ventral tegmental area

  16. Cellulolytic and xylanolytic potential of high β-glucosidase-producing Trichoderma from decaying biomass.

    Science.gov (United States)

    Okeke, Benedict C

    2014-10-01

    Availability, cost, and efficiency of microbial enzymes for lignocellulose bioconversion are central to sustainable biomass ethanol technology. Fungi enriched from decaying biomass and surface soil mixture displayed an array of strong cellulolytic and xylanolytic activities. Strains SG2 and SG4 produced a promising array of cellulolytic and xylanolytic enzymes including β-glucosidase, usually low in cultures of Trichoderma species. Nucleotide sequence analysis of internal transcribed spacer 2 (ITS2) region of rRNA gene revealed that strains SG2 and SG4 are closely related to Trichoderma inhamatum, Trichoderma piluliferum, and Trichoderma aureoviride. Trichoderma sp. SG2 crude culture supernatant correspondingly displayed as much as 9.84 ± 1.12, 48.02 ± 2.53, and 30.10 ± 1.11 units mL(-1) of cellulase, xylanase, and β-glucosidase in 30 min assay. Ten times dilution of culture supernatant of strain SG2 revealed that total activities were about 5.34, 8.45, and 2.05 orders of magnitude higher than observed in crude culture filtrate for cellulase, xylanase, and β-glucosidase, respectively, indicating that more enzymes are present to contact with substrates in biomass saccharification. In parallel experiments, Trichoderma species SG2 and SG4 produced more β-glucosidase than the industrial strain Trichoderma reesei RUT-C30. Results indicate that strains SG2 and SG4 have potential for low cost in-house production of primary lignocellulose-hydrolyzing enzymes for production of biomass saccharides and biofuel in the field.

  17. Enzymic hydrolysis of xylans. I. A high xylanase and beta-xylosidase producing strain of Aspergillus niger

    Energy Technology Data Exchange (ETDEWEB)

    Conrad, D.

    1981-01-01

    Aspergillus niger, strain 110.42 (CBS) was selected as a producer of high xylanolytic activities. The time course of xylanase and beta-xylosidase production as well as the effect of pH and temperature on the activity of these enzymes were studied. High-performance liquid chromatography analysis of the enzymic degradation of arabinoxylan showed a nearly complete conversion to pentose sugars. Aspects of using crude xylanase preparations for enzymic saccharification of xylans are discussed.

  18. Initial characterisation of low and high seed dormancy populations of Lolium rigidum produced by repeated selection.

    Science.gov (United States)

    Goggin, Danica E; Emery, R J Neil; Powles, Stephen B; Steadman, Kathryn J

    2010-10-15

    The physiological and biochemical bases of seed dormancy in Lolium rigidum (annual ryegrass) are largely unknown, and study of this process is complicated by the outcrossing nature of the species and the strong influence of environment on seed dormancy. In order to identify heritable biochemical factors contributing to seed dormancy in L. rigidum, seeds from a field-collected population were used to select sub-populations with consistently low or high seed dormancy over four generations. Low-dormancy seeds showed constitutive alpha-amylase activity prior to imbibition, higher concentrations of polyphenols and cis-zeatin, and lower abscisic acid and cis-zeatin riboside concentrations than high-dormancy seeds. Selection for high dormancy was associated with a reduction in response to dark-stratification for 21d at 20 degrees C (an effective means of releasing dormancy in the original, unselected population) over successive generations, but fluridone remained effective in breaking dormancy. Crossing of low- and high-dormancy populations indicated that dormancy level was not dependent upon the maternal genotype of the seed, and that the constitutive alpha-amylase activity and high seed anthocyanin concentrations characteristic of the low-dormancy populations were not correlated to high basal germination ability. Copyright (c) 2010 Elsevier GmbH. All rights reserved.

  19. Structure and properties of highly oriented polyoxymethylene produced by hot stretching

    International Nuclear Information System (INIS)

    Zhao Xiaowen; Ye Lin

    2011-01-01

    Research highlights: → Highly oriented POM was fabricated through solid hot stretching technology → Tensile strength and modulus of POM increased remarkably with draw ratio. → The crystal structure of POM changed from spherulite to mat texture by drawing. → Crystallinity and orientation factor of POM increased remarkably by drawing. → The mechanical structure model of microfibril of POM was established. - Abstract: Highly oriented self-reinforced polyoxymethylene (POM) was successfully fabricated through solid phase hot stretching technology. The tensile strength and modulus increased with draw ratio, which reached 900 MPa and 12 GPa, respectively at a high draw ratio of 900% without remarkable drop of the elongation at break. The structure and morphology of the drawn products were studied and the mechanical structure model of microfibril of POM was established. Raman spectral exhibited a low-frequency shift, which indicated two types of molecular chains with different response to the stress. During drawing, the spherulitic structure of POM was broken up and the mat texture crystals were formed. With the increase of draw ratio, the melting peak moved to high temperature and an additional shoulder peak ascribed to melting of highly chain-extended and oriented crystalline blocks was observed. X-ray diffraction showed that the crystallinity and orientation factor increased, while the grain size perpendicular to (1 0 0) crystal plane of POM decreased by drawing. The α relaxation peak corresponding to the glass transition temperature of POM (T g ) moved to high temperature with draw ratio. The section morphology of drawn POM exhibited a fibrillar structure which contributed to the significantly high tensile strength and modulus of the product.

  20. High Prevalence of Multiple Drug Resistance among ESBLs-Producing Klebsiella pneumoniae Isolated from Hospitalized Patients in Isfahan, Iran

    Directory of Open Access Journals (Sweden)

    Zahra Tahanasab

    2017-02-01

    Full Text Available Background:   This study was to evaluate the prevalence of CTX-Mand TEM type ESBLs-producing K. pneumoniae and determination of MDR, XDR, and PDR phenotypes of these isolates as well as find out the genetic relationship and molecular typing of these isolates using phenotypic and genotypic methods.Methods:   Non-repetitive 96 K. pneumonia isolates were isolated from hospitalized patients in Al-Zahra hospital of Isfahan, Iran. The antibiotic susceptibility test was assessed for 20 antibiotics using Kirby-Bauer disk diffusion method. The frequency of ESBL-producing isolates was determined by phenotypic confirmatory test. All ESBLs-producing isolates were assessed for blaTEM and blaCTX-M genes using PCR method. Molecular typing was performed by enterobacterial repetitive intergenic consensus sequence-based PCR (ERIC-PCR.Results:  Among 96 isolates, 58 isolates (60.4% were ESBL-producers. In this study, 85.7% and 30.3% of ESBL-producing isolates showed MDR and XDR phenotypes, respectively. No PDR isolate was found. PCR amplification on ESBL-producing isolates showed that 47 (81% isolates were carried blaTEM gene, while blaCTX-M was detected in all isolates (100%. ERIC-PCR typing was characterized the high genetic similarity among ESBL-producing K. pneumonia isolates and revealed 32 band pattern for the isolates. Conclusion:  This study showed high prevalence of important ESBL genes (blaCTX-M and blaTEM genes among the K. pneumoniae isolated from in-patients. Constant following of ESBLs, also identification of their types, in bacteria isolated from hospitalized patients has an important clinical impact. It can provide valuable information for the choice of appropriate antibacterial therapy and decrease of antibiotic resistance.

  1. Confinement characteristics of high-energy ions produced by ICRF heating in the large helical device

    International Nuclear Information System (INIS)

    Kumazawa, R; Saito, K; Torii, Y; Mutoh, T; Seki, T; Watari, T; Osakabe, M; Murakami, S; Sasao, M; Watanabe, T; Yamamoto, T; Notake, T; Takeuchi, N; Saida, T; Shimpo, F; Nomura, G; Yokota, M; Kato, A; Zao, Y; Okada, H; Isobe, M; Ozaki, T; Narihara, K; Nagayama, Y; Inagaki, S; Morita, S; Krasilnikov, A V; Idei, H; Kubo, S; Ohkubo, K; Sato, M; Shimozuma, T; Yoshimura, Y; Ikeda, K; Nagaoka, K; Oka, Y; Takeiri, Y; Tsumori, K; Ashikawa, N; Emoto, M; Funaba, H; Goto, M; Ida, K; Kobuchi, T; Liang, Y; Masuzaki, S; Minami, T; Miyazawa, J; Morisaki, T; Muto, S; Nakamura, Y; Nakanishi, H; Nishimura, K; Noda, N; Ohdachi, S; Peterson, B J; Sagara, A; Sakakibara, S; Sakamoto, R; Sato, K; Shoji, M; Suzuki, H; Tanaka, K; Toi, K; Tokuzawa, T; Watanabe, K Y; Yamada, I; Yamamoto, S; Yoshinuma, M; Yokoyama, M; Watanabe, K-Y; Kaneko, O; Kawahata, K; Komori, A; Ohyabu, N; Yamada, H; Yamazaki, K; Sudo, S; Matsuoka, K; Hamada, Y; Motojima, O; Fujiwara, M

    2003-01-01

    The behaviour of high-energy ions accelerated by an ion cyclotron range of frequency (ICRF) electric field in the large helical device (LHD) is discussed. A better confinement performance of high-energy ions in the inward-shifted magnetic axis configuration was experimentally verified by measuring their energy spectrum and comparing it with the effective temperature determined by an electron slowing down process. In the standard magnetic axis configuration a saturation of the measured tail temperature was observed as the effective temperature was increased. The ratio between these two quantities is a measure of the quality of transfer efficiency from high-energy ions to a bulk plasma; when this efficiency was compared with Monte Carlo simulations the results agreed fairly well. The ratio of the stored energy of the high-energy ions to that of the bulk plasma was measured using an ICRF heating power modulation method; it was deduced from phase differences between total and bulk plasma stored energies and the modulated ICRF heating power. The measured high energy fraction agreed with that calculated using the injected ICRF heating power, the transfer efficiency determined in the experiment and the confinement scaling of the LHD plasma

  2. Metallurgy of high-silicon steel parts produced using Selective Laser Melting

    International Nuclear Information System (INIS)

    Garibaldi, Michele; Ashcroft, Ian; Simonelli, Marco; Hague, Richard

    2016-01-01

    The metallurgy of high-silicon steel (6.9%wt.Si) processed using Selective Laser Melting (SLM) is presented for the first time in this study. High-silicon steel has great potential as a soft magnetic alloy, but its employment has been limited due to its poor workability. The effect of SLM-processing on the metallurgy of the alloy is investigated in this work using microscopy, X-Ray Diffraction (XRD) and Electron Backscatter Diffraction (EBSD). XRD analysis suggests that the SLM high-silicon steel is a single ferritic phase (solid solution), with no sign of phase ordering. This is expected to have beneficial effects on the material properties, since ordering has been shown to make silicon steels more brittle and electrically conductive. For near-fully dense samples, columnar grains with a high aspect ratio and oriented along the build direction are found. Most importantly, a <001> fibre-texture along the build direction can be changed into a cube-texture when the qualitative shape of the melt-pool is altered (from shallow to deep) by increasing the energy input of the scanning laser. This feature could potentially open the path to the manufacture of three-dimensional grain-oriented high-silicon steels for electromechanical applications.

  3. Synthesis and Characterization of Mass Produced High Quality Few Layered Graphene Sheets via a Chemical Method

    KAUST Repository

    Khenfouch, Mohammed

    2014-04-01

    Graphene is a two-dimensional crystal of carbon atoms arranged in a honeycomb lattice. It is a zero band gap semimetal with very unique physical and chemical properties which make it useful for many applications such as ultra-high-speed field-effect transistors, p-n junction diodes, terahertz oscillators, and low-noise electronic, NEMS and sensors. When the high quality mass production of this nanomaterial is still a big challenge, we developed a process which will be an important step to achieve this goal. Atomic Force Microscopy, Scanning Electron Microscopy, Scanning tunneling microscopy, High Resolution Transmission Electron Microscopy, X-Ray Diffraction, Raman spectroscopy, Energy Dispersive X-ray system were investigated to characterize and examine the quality of this product.

  4. Selection of process parameters for producing high quality defatted sesame flour at pilot scale.

    Science.gov (United States)

    Manikantan, M R; Sharma, Rajiv; Yadav, D N; Gupta, R K

    2015-03-01

    The present work was undertaken to study the effect of pearling duration, soaking time, steaming duration and drying temperature on the quality of sesame seeds and mechanically extracted partially defatted sesame cake. On the basis of quality attributes i.e. high protein, low crude fibre, low residual oil and low oxalic acid, the optimum process parameters were selected. The combination of 20 min of pearling duration, 15 min of soaking, 15 min of steaming at 100 kPa pressure and drying at 50 °C yielded high quality partially defatted protein rich sesame flour as compared to untreated defatted sesame flour. The developed high quality partially defatted protein rich sesame flour may be used in various food applications as a vital ingredient to increase the nutritional significance of the prepared foodstuffs.

  5. Self-dispersible nanocrystals of albendazole produced by high pressure homogenization and spray-drying.

    Science.gov (United States)

    Paredes, Alejandro Javier; Llabot, Juan Manuel; Sánchez Bruni, Sergio; Allemandi, Daniel; Palma, Santiago Daniel

    2016-10-01

    Albendazole (ABZ) is a broad-spectrum antiparasitic drug used in the treatment of human or animal infections. Although ABZ has shown a high efficacy for repeated doses in monogastric mammals, its low aqueous solubility leads to erratic bioavailability. The aim of this work was to optimize a procedure in order to obtain ABZ self-dispersible nanocrystals (SDNC) by combining high pressure homogenization (HPH) and spray-drying (SD). The material thus obtained was characterized and the variables affecting both the HPH and SD processes were studied. As expected, the homogenizing pressure and number of cycles influenced the final particle size, while the stabilizer concentration had a strong impact on SD output and redispersion of powders upon contact with water. ABZ SDNC were successfully obtained with high process yield and redispersibility. The characteristic peaks of ABZ were clearly identified in the X-ray patterns of the processed samples. A noticeable increase in the dissolution rate was observed in the aqueous environment.

  6. HIGH YIELD AND RAPID SYNTHESES METHODS FOR PRODUCING METALLO-ORGANIC SALTS

    DEFF Research Database (Denmark)

    2005-01-01

    A new method for preparing salts of metal cations and organic acids, especially divalent salts of alkaline earth metal ions from group II of the periodic system and carboxylic acids. The method comprising the use of a high temperature (about 90° or more) and, optionally. high pressure, in order...... to obtain a higher yield, purity and faster reaction speed than obtained with known synthesis methods. In particular, the present invention relates to the production of strontium salts of carboxylic acids. Novel strontium salts are also provided by the present method....

  7. Improved High Current Liquid and Gas Targets for Cyclotron Produced Radioisotopes (Saudi Arabia)

    Energy Technology Data Exchange (ETDEWEB)

    Al Jammaz, Ibrahim; AlYanbawi, S.; Van-Heerden, W.; Miliebari, S.; Rahma, S.; Carrol, D. [King Faisal Specialist Hospital & Research Centre, Riyadh (Saudi Arabia)

    2009-07-01

    The development and improvement of target technology for reliable and higher production yields is described with respect to fluorine-18 and krypton-81. This report includes specific studies on: 1) beam degradation, distribution and diagnostic tools for monitoring the beam during irradiation; 2) targets that are capable of withstanding high current beam and consequently high specific activity radiopharmaceuticals; 3) greater understanding of in-target chemical and physical phenomena for the preparation of new radiolabeled species; and 4) recovery and characterization very expensive enriched material. (author)

  8. Improved High Current Liquid and Gas Targets for Cyclotron Produced Radioisotopes (Saudi Arabia)

    International Nuclear Information System (INIS)

    Al Jammaz, Ibrahim; AlYanbawi, S.; Van-Heerden, W.; Miliebari, S.; Rahma, S.; Carrol, D.

    2009-01-01

    The development and improvement of target technology for reliable and higher production yields is described with respect to fluorine-18 and krypton-81. This report includes specific studies on: 1) beam degradation, distribution and diagnostic tools for monitoring the beam during irradiation; 2) targets that are capable of withstanding high current beam and consequently high specific activity radiopharmaceuticals; 3) greater understanding of in-target chemical and physical phenomena for the preparation of new radiolabeled species; and 4) recovery and characterization very expensive enriched material. (author)

  9. Emulsifier-free emulsion polymerization produces highly charged, monodisperse particles for near infrared photonic crystals.

    Science.gov (United States)

    Reese, Chad E; Asher, Sanford A

    2002-04-01

    We have developed emulsifier-free, emulsion polymerization recipes for the synthesis of highly charged, monodisperse latex particles of diameters between 500 and 1100 nm. These latexes consist of poly[styrene-(co-2-hydroxyethyl methacrylate)] spherical particles whose surfaces are functionalized with sulfate and carboxylic acid groups. These highly charged, monodisperse particles readily self-assemble into robust, three-dimensionally ordered crystalline colloidal array photonic crystals that Bragg diffract light in the near infrared spectral region. By altering the particle number density, the diffraction wavelength can be tuned from approximately 1000 to approximately 4000 nm.

  10. STUDY OF GRINDING PROCESS OF TITANIUM CARBIDE PRODUCED WITH SELF-PROPAGATING HIGH TEMPERATURE SYNTHESIS (SPHTS)

    International Nuclear Information System (INIS)

    Kovziridze, Z.; Tabatadze, G.; Donadze, G.; Lezhava, A.; Gventsadze, D.

    2006-01-01

    It is stated that the specific character of SPHTS-preparations of TiC_x consists in crystal lattice strength reflecting the condition of synthesis in ''burning wave''. The use of roentgenographic and other methods of analysis allows to estimate the effect of the conditions of synthesis, causing carbon sublattice defect on grinding intensity of TiC_x phases. Study of the kinetics of vibro-grinding of TiC_x-phases in ethanol and benzene medium allows to establish high grinding intensity of the phases close to stoichiometry and the possibility of high depresion powderds (S_s_p H'' 4.5-6 m"2/g). (author)

  11. Kolm Eesti Robinsoni: Daniel Defoe romaan eesti tõlkes / Three Estonian Robinsons: Daniel Defoe’s Novel in Estonian Translation

    Directory of Open Access Journals (Sweden)

    Ene-Reet Soovik

    2012-06-01

    Full Text Available The article discusses three Estonian translations of Daniel Defoe’s Robinson Crusoe into Estonian with the focus on the completeness of the translated texts and the characterisation given to these in paratextual information. While there are several translations and versions of the tex t available in E stonian that have either used a mediating language or do not proceed directly from Defoe’s novel, three editions explicitly list Defoe’s English-language Robinson Crusoe as their source text. These are Rudolf Sirge’s translation from 1950 and two editions translated by Valter Rummel that appeared in 1984 (reprinted in 2001 and 2007, respectively. The article sets out to discover the main differences between the three editions and the possible reasons that may have triggered their publication in Estonia at those particular times. In order to approach the issues, a general framework derived from descriptive translation studies is employed with an emphasis on Gideon Toury’s chrestomatic treatment of translation norms. Thus an attempt is made to detect the preliminary translational norms regarding translation policy, particularly the choice of texts to be translated, as well as the matricial norms that concern the fullness of the translated text and are part of operational norms manifested in the translator’s decisions which, in two of the cases at hand, may also have been decisions made by the editor or the censor. Rudolf Sirge’s translation appeared at a time when Estonia had fairly recently been incorporated into the Soviet Union and there was a lack of children’s literature ideologically appreciated by the regime. This may account for the packaging of the book as a work with a strong didactic bent, while its primary audience was taken to be children and young adults for whom the protagonist served as an example of a hard-working and tenacious hero to be emulated by young Soviets. The target text has been considerably shortened as

  12. High beta capture and mirror confinement of laser produced plasmas. Final report

    International Nuclear Information System (INIS)

    Haught, A.F.; Tomlinson, R.G.; Ard, W.B.; Boedeker, L.R.; Churchill, T.L.; Fader, W.J.; Jong, R.A.; Mensing, A.E.; Polk, D.H.; Stufflebeam, J.H.

    1977-12-01

    The LITE fusion plasma research program at UTRC has been investigating the stabilization and confinement physics of a mirror plasma created by energetic neutral beam heating of a confined target plasma. During the period covered by this report work has been concentrated on the investigation of hot ion losses in a warm target plasma, development of a cryocondensation pump for the LITE beam line neutralizer, theoretical studies of ECRH modification of the ambipolar potential in mirror plasmas, and analysis of the effects of localized cold plasma on DCLC stabilization. The results of these investigations are summarized below and detailed in four papers which comprise the body of this report. Measurements of the lifetime of hot ions in a mirror confined warm plasma have been carried out by observations of the hot ion buildup time obtained with energetic neutral beam injection. A cryocondensation pump of novel design has been constructed and incorporated in the neutralizer chamber of the LITE neutral beam line. Calculations have been carried out to evaluate the sizes and shapes of ambipolar potential modification produced by electron cyclotron resonance heated electrons and to determine the spatial distribution and densities of cold ions trapped in the potential wells. The effects of the spatial distribution of the cold ions on their effectiveness for stabilizing the drift cyclotron loss cone instability has been studied numerically using the formulation of Pearlstein in which the dispersion relation for the DCLC mode is solved for finite-size plasmas containing hot and cold components

  13. Study of Muon Pairs and Vector Mesons Produced in High Energy Pb-Pb Interactions

    CERN Multimedia

    Karavicheva, T; Atayan, M; Bordalo, P; Constans, N P; Gulkanyan, H; Kluberg, L

    2002-01-01

    %NA50 %title\\\\ \\\\The experiment studies dimuons produced in Pb-Pb and p-A collisions, at nucleon-nucleon c.m. energies of $ \\sqrt{s} $ = 18 and 30 GeV respectively. The setup accepts dimuons in a kinematical range roughly defined as $0.1$ $1 GeV/c$, and stands maximal luminosity (5~10$^{7}$~Pb ions and 10$^7$ interactions per burst). The physics includes signals which probe QGP (Quark-Gluon Plasma), namely the $\\phi$, J/$\\psi$ and $\\psi^\\prime$ vector mesons and thermal dimuons, and reference signals, namely the (unseparated) $\\rho$ and $\\omega$ mesons, and Drell-Yan dimuons. The experiment is a continuation, with improved means, of NA38, and expands its study of {\\it charmonium suppression} and {\\it strangeness enhancement}.\\\\ \\\\The muons are measured in the former NA10 spectrometer, which is shielded from the hot target region by a beam stopper and absorber wall. The muons traverse 5~m of BeO and C. The impact parameter is determined by a Zero Degree Calorimeter (Ta with silica fibres). Energy dissipation ...

  14. Energy Saving in an ETC Solar System to Produce High Temperature Water

    Directory of Open Access Journals (Sweden)

    Carlos J. Porras-Prieto

    2018-04-01

    Full Text Available The use of solar water heating systems (SWHS based on evacuated tube collectors (ETC has experienced rapid growth in the residential sector. In contrast, the implementation of these systems in the industrial sector is very limited, due in part to the demand of a higher temperature in water. Taking into account that the final energy of the industrial sector is similar to the residential sector, to increase the generation of renewable energy and energy saving in cities, efforts in this sector should be redoubled. Therefore, the present work characterises the behaviour of a SWHS-ETC with active circulation to produce hot water at 90 °C, determining its performance, energy saving and profitability in different scenarios in Europe. The annual energy savings generated by the SWHS Range between 741 and 435 kWh m−2 (reduction of emissions between 215 and 88 kg CO2 m−2. The results of the analysis of profitability, studying the variation of the conventional energy price, the cost of the investment, the useful life and the energy supplied, in thousands of scenarios, are a valuable tool for correct decision making, as they can be of great utility to increase the implementation of these systems in the industrial sector.

  15. Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders

    Energy Technology Data Exchange (ETDEWEB)

    Özbilen, Sedat [Forschungszentrum Jülich, Institute of Energy and Climate Research (IEK), 52425 Jülich (Germany); Gazi University, Faculty of Technology, Department of Metallurgical and Materials Engineering, Teknikokullar, Ankara (Turkey); Liebert, Daniela [Forschungszentrum Jülich, Institute of Energy and Climate Research (IEK), 52425 Jülich (Germany); Beck, Tilmann [Forschungszentrum Jülich, Institute of Energy and Climate Research (IEK), 52425 Jülich (Germany); University of Kaiserslautern, Lehrstuhl für Werkstoffkunde (WKK), D-67663 Kaiserslautern (Germany); Bram, Martin, E-mail: m.bram@fz-juelich.de [Forschungszentrum Jülich, Institute of Energy and Climate Research (IEK), 52425 Jülich (Germany)

    2016-03-01

    Porous titanium cylinders were produced with a constant amount of temporary space holder (70 vol.%). Different interstitial contents were achieved by varying the starting powders (HDH vs. gas atomized) and manufacturing method (cold compaction without organic binders vs. warm compaction of MIM feedstocks). Interstitial contents (O, C, and N) as a function of manufacturing were measured by chemical analysis. Samples contained 0.34–0.58 wt.% oxygen, which was found to have the greatest effect on mechanical properties. Quasi-static mechanical tests under compression at low strain rate were used for reference and to define parameters for cyclic compression tests. Not unexpectedly, increased oxygen content increased the yield strength of the porous titanium. Cyclic compression fatigue tests were conducted using sinusoidal loading in a servo-hydraulic testing machine. Increased oxygen content was concomitant with embrittlement of the titanium matrix, resulting in significant reduction of compression cycles before failure. For samples with 0.34 wt.% oxygen, R, σ{sub min} and σ{sub max} were varied systematically to estimate the fatigue limit (~ 4 million cycles). Microstructural changes induced by cyclic loading were then characterized by optical microscopy, SEM and EBSD. - Highlights: • Systematic variation of the oxygen content from 0.34 to 0.58 wt.%. • Systematic study of the relationship between fatigue limit and oxygen content. • Critical oxygen equivalent seems to be 0.35 wt.% to avoid embrittlement. • Identification of the failure modes by light microscopy, SEM and EBSD.

  16. Phytoplankton Do Not Produce Carbon-Rich Organic Matter in High CO2 Oceans

    Science.gov (United States)

    Kim, Ja-Myung; Lee, Kitack; Suh, Young-Sang; Han, In-Seong

    2018-05-01

    The ocean is a substantial sink for atmospheric carbon dioxide (CO2) released as a result of human activities. Over the coming decades the dissolved inorganic C concentration in the surface ocean is predicted to increase, which is expected to have a direct influence on the efficiency of C utilization (consumption and production) by phytoplankton during photosynthesis. Here we evaluated the generality of C-rich organic matter production by examining the elemental C:N ratio of organic matter produced under conditions of varying pCO2. The data used in this analysis were obtained from a series of pelagic in situ pCO2 perturbation studies that were performed in the diverse ocean regions and involved natural phytoplankton assemblages. The C:N ratio of the resulting particulate and dissolved organic matter did not differ across the range of pCO2 conditions tested. In particular, the ratio for particulate organic C and N was found to be 6.58 ± 0.05, close to the theoretical value of 6.6.

  17. Fatigue behavior of highly porous titanium produced by powder metallurgy with temporary space holders.

    Science.gov (United States)

    Özbilen, Sedat; Liebert, Daniela; Beck, Tilmann; Bram, Martin

    2016-03-01

    Porous titanium cylinders were produced with a constant amount of temporary space holder (70 vol.%). Different interstitial contents were achieved by varying the starting powders (HDH vs. gas atomized) and manufacturing method (cold compaction without organic binders vs. warm compaction of MIM feedstocks). Interstitial contents (O, C, and N) as a function of manufacturing were measured by chemical analysis. Samples contained 0.34-0.58 wt.% oxygen, which was found to have the greatest effect on mechanical properties. Quasi-static mechanical tests under compression at low strain rate were used for reference and to define parameters for cyclic compression tests. Not unexpectedly, increased oxygen content increased the yield strength of the porous titanium. Cyclic compression fatigue tests were conducted using sinusoidal loading in a servo-hydraulic testing machine. Increased oxygen content was concomitant with embrittlement of the titanium matrix, resulting in significant reduction of compression cycles before failure. For samples with 0.34 wt.% oxygen, R, σ(min) and σ(max) were varied systematically to estimate the fatigue limit (~4 million cycles). Microstructural changes induced by cyclic loading were then characterized by optical microscopy, SEM and EBSD. Copyright © 2015 Elsevier B.V. All rights reserved.

  18. Highly thermal-stable and functional cellulose nanocrystals and nanofibrils produced using fully recyclable organic acids

    Science.gov (United States)

    Liheng Chen; Junyong Zhu; Carlos Baez; Peter Kitin; Thomas Elder

    2016-01-01

    Here we report the production of highly thermal stable and functional cellulose nanocrystals (CNC) and nanofibrils (CNF) by hydrolysis using concentrated organic acids. Due to their low water solubility, these solid organic acids can be easily recovered after hydrolysis reactions through crystallization at a lower or ambient temperature. When dicarboxylic acids were...

  19. Statistical modeling in phenomenological description of electromagnetic cascade processes produced by high-energy gamma quanta

    International Nuclear Information System (INIS)

    Slowinski, B.

    1987-01-01

    A description of a simple phenomenological model of electromagnetic cascade process (ECP) initiated by high-energy gamma quanta in heavy absorbents is given. Within this model spatial structure and fluctuations of ionization losses of shower electrons and positrons are described. Concrete formulae have been obtained as a result of statistical analysis of experimental data from the xenon bubble chamber of ITEP (Moscow)

  20. USE OF HIGH-STRENGTH BAINITIC CAST IRON FOR PRODUCING GEAR WHEELS

    Directory of Open Access Journals (Sweden)

    A. I. Pokrovskiy

    2015-01-01

    Full Text Available The advantages and drawbacks of high-strength cast irons with bainitic structure are reviewed basing on the authors’ own experience in the production of critical partsfrom this material and on the analysis of world trends. A possibility of the replacement of alloy steels by bainitic cast iron in manufacturing critical machine parts is discussed.

  1. The INNOHYP-CA Project: producing Hydrogen by innovative high-temperature processes

    International Nuclear Information System (INIS)

    Giaconia, A.; Giorgiantoni, G.; Liberatore, R.; Tarquini, P.; Vignolini, M.

    2008-01-01

    The Project, financed under the 6. Framework Programme, has selected a member of innovative high-temperature processes that seem promising for large-scale production of Hydrogen. ENEA has contributed to the analysis of the status of national and regional projects in the European countries and to the definition of guidelines for the future development of these technologies [it

  2. Analysis of High Speed Jets Produced by a Servo Tube Driven Liquid Jet Injector

    Science.gov (United States)

    Portaro, Rocco; Ng, Hoi Dick

    2017-11-01

    In today's healthcare environment many types of medication must be administered through the use of hypodermic needles. Although this practice has been in use for many years, drawbacks such as accidental needle stick injuries, transmission of deadly viruses and bio-hazardous waste are still present. This study focuses on improving a needle free technology known as liquid jet injection, through the implementation of a linear servo tube actuator for the construction of a fully closed loop liquid jet injection system. This device has the ability to deliver both micro- and macro- molecules, high viscosity fluids whilst providing real time control of the jet pressure profile for accurate depth and dispersion control. The experiments are conducted using a prototype that consists of a 3 kW servo tube actuator, coupled to a specially designed injection head allowing nozzle size and injection volume to be varied. The device is controlled via a high speed servo amplifier and FPGA. The high speed jets emanating from the injector are assessed via high speed photography and through the use of a force transducer. Preliminary results indicate that the system allows for accurate shaping of the jet pressure profile, making it possible to target different tissue depths/types accurately.

  3. The response of high and low polyamine producing cell lines to aluminum and calcium stress

    Science.gov (United States)

    Sridev Mohapatra; Smita Cherry; Rakesh Minocha; Rajtilak Majumdar; Palaniswamy Thangavel; Stephanie Long; Subhash C. Minocha

    2010-01-01

    The diamine putrescine (Put) has been shown to accumulate in tree leaves in response to high Al and low Ca in the soil, leading to the suggestion that this response may provide a physiological advantage to leaf cells under conditions of Al stress. The increase in Put is reversed by Ca supplementation in the soil. Using two cell lines of poplar (Populus nigra...

  4. [Search for strange quark matter and antimatter produced in high energy heavy ion collisions

    International Nuclear Information System (INIS)

    1992-01-01

    This document describes the development and progress of our group's research program in high energy heavy ion physics. We are a subset of the Yale experimental high energy physics effort (YAUG group) who became interested in the physics of high energy heavy ions in 1988. Our interest began with the possibility of performing significant searches for strange quark matter. As we learned more about the subject and as we gained experimental experience through our participation in AGS experiment 814, our interests have broadened. Our program has focused on the study of new particles, including (but not exclusively) strange quark matter, and the high sensitivity measurement of other composite nuclear systems such as antinuclei and various light nuclei. The importance of measurements of the known, but rare, nuclear systems lies in the study of production mechanisms. A good understanding of the physics and phenomenology of rare composite particle production in essential for the interpretation of limits to strange quark matter searches. We believe that such studies will also be useful in probing the mechanisms involved in the collision process itself. We have been involved in the running and data analysis for AGS E814. We have also worked on the R ampersand D for AGS E864, which is an approved experiment designed to reach sensitivities where there will be a good chance of discovering strangelets or of setting significant limits on the parameters of strange quark matter

  5. Semi-solid high pressure die casting of metal matrix composites produced by liquid state processing

    CSIR Research Space (South Africa)

    Ivanchev, L

    2012-10-01

    Full Text Available stirring. The composite was then transferred to a High Pressure Die Casting (HPDC) machine in the semi-solid state. The micron size particles were found to be predominantly in the intergranular eutectic while the nano-particles were predominantly...

  6. A simple approach for producing highly efficient DNA carriers with reduced toxicity based on modified polyallylamine

    Energy Technology Data Exchange (ETDEWEB)

    Oskuee, Reza Kazemi [Neurogenic Inflammation Research Center, Mashhad University of Medical Sciences, Mashhad (Iran, Islamic Republic of); Department of Medical Biotechnology, School of Medicine, Mashhad University of Medical Sciences, Mashhad (Iran, Islamic Republic of); Dosti, Fatemeh [School of Pharmacy, Mashhad University of Medical Sciences, Mashhad (Iran, Islamic Republic of); Gholami, Leila [Targeted Drug Delivery Research Center, School of Medicine, Mashhad University of Medical Sciences, Mashhad (Iran, Islamic Republic of); Malaekeh-Nikouei, Bizhan, E-mail: malaekehb@mums.ac.ir [Nanotechnology Research Center, School of Pharmacy, Mashhad University of Medical Sciences, Mashhad (Iran, Islamic Republic of)

    2015-04-01

    Nowadays gene delivery is a topic in many research studies. Non-viral vectors have many advantages over viral vectors in terms of safety, immunogenicity and gene carrying capacity but they suffer from low transfection efficiency and high toxicity. In this study, polyallylamine (PAA), the cationic polymer, has been modified with hydrophobic branches to increase the transfection efficiency of the polymer. Polyallylamine with molecular weights of 15 and 65 kDa was selected and grafted with butyl, hexyl and decyl acrylate at percentages of 10, 30 and 50. The ability of the modified polymer to condense DNA was examined by ethidium bromide test. The complex of modified polymer and DNA (polyplex) was characterized for size, zeta potential, transfection efficiency and cytotoxicity in Neuro2A cell lines. The results of ethidium bromide test showed that grafting of PAA decreased its ability for DNA condensation but vectors could still condense DNA at moderate and high carrier to DNA ratios. Most of polyplexes had particle size between 150 and 250 nm. The prepared vectors mainly showed positive zeta potential but carriers composed of PAA with high percentage of grafting had negative zeta potential. The best transfection activity was observed in vectors with hexyl acrylate chain. Grafting of polymer reduced its cytotoxicity especially at percentages of 30 and 50. The vectors based of PAA 15 kDa had better transfection efficiency than the vectors made of PAA 65 kDa. In conclusion, results of the present study indicated that grafting PAA 15 kDa with high percentages of hexyl acrylate can help to prepare vectors with better transfection efficiency and less cytotoxicity. - Highlights: • The modified polyallylamine was synthesized as a gene carrier. • Modification of polyallylamine (15 kDa) with high percentages of hexyl acrylate improved transfection activity remarkably. • Grafting of polymer with acrylate derivatives reduced polymer cytotoxicity especially at percentages of

  7. Combinations of mutant FAD2 and FAD3 genes to produce high oleic acid and low linolenic acid soybean oil.

    Science.gov (United States)

    Pham, Anh-Tung; Shannon, J Grover; Bilyeu, Kristin D

    2012-08-01

    High oleic acid soybeans were produced by combining mutant FAD2-1A and FAD2-1B genes. Despite having a high oleic acid content, the linolenic acid content of these soybeans was in the range of 4-6 %, which may be high enough to cause oxidative instability of the oil. Therefore, a study was conducted to incorporate one or two mutant FAD3 genes into the high oleic acid background to further reduce the linolenic acid content. As a result, soybean lines with high oleic acid and low linolenic acid (HOLL) content were produced using different sources of mutant FAD2-1A genes. While oleic acid content of these HOLL lines was stable across two testing environments, the reduction of linolenic acid content varied depending on the number of mutant FAD3 genes combined with mutant FAD2-1 genes, on the severity of mutation in the FAD2-1A gene, and on the testing environment. Combination of two mutant FAD2-1 genes and one mutant FAD3 gene resulted in less than 2 % linolenic acid content in Portageville, Missouri (MO) while four mutant genes were needed to achieve the same linolenic acid in Columbia, MO. This study generated non-transgenic soybeans with the highest oleic acid content and lowest linolenic acid content reported to date, offering a unique alternative to produce a fatty acid profile similar to olive oil.

  8. Estonian exceptionalism

    Index Scriptorium Estoniae

    2011-01-01

    Ulatuslikud kärped ja liitumine eurotsooniga toovad Eestist häid majandusuudiseid: töötus langeb, majandus kasvab, eksport tõuseb, eelarve on plussis, reitinguagentuur Fitch krediidireiting tõusis tasemele A+

  9. With or without articles? A comparison of article-like determiners in Estonian and Finnish

    Directory of Open Access Journals (Sweden)

    Helen Hint

    2017-10-01

    Full Text Available In this paper, we compare the use and functions of definite and indefinite article-like determiners in Estonian and Finnish. Our main aim is to explore whether the factors that explain the choice of particular determiner forms are similar in Estonian and Finnish. We use a picture-sequence based elicitation experiment to collect spoken narratives from adult native speakers of Estonian and Finnish, and apply non-parametric tree and forest models to analyze the data. Our findings indicate that number of mention and animacy are important predictor variables in both languages, but their exact effect is divergent. We also find that in Finnish, case of the determiner NP proves to be an important factor, while in Estonian, syntactic role of the NP explains some aspects of determiner form choice. Nevertheless, the overall usage frequency of determiners is modest in the Estonian and Finnish data, and the process of grammaticalizing articles is only in initial stages in both languages. *** Artikliga, artiklita? Eesti ja soome keele artiklilaadsete määratlejate võrdlus Siinses uurimuses analüüsime võrdlevalt artiklilaadseid definiitseid ja indefiniitseid määratlejaid eesti ja soome keeles. Eelkõige kõrvutame eesti keele definiitset määratlejat see ja soome keele definiitseid määratlejaid se ja tämä ning eesti ja soome indefiniitset määratlejat üks/yks(i. Samuti vaatleme eesti keele possessiivpronoomeni oma ning soome 3sg possessiivsufiksi (-nsa/-nsä, -Vn referentsiaalseid omadusi. Uurimuse põhieesmärgiks on selgitada, millised on peamised määratlejate kasutust mõjutavad keelelised faktorid eesti ja soome keeles ning kas need faktorid on keeliti sarnased või erinevad. Ühtlasi otsime vastust küsimusele, kas eesti ja soome keeles on põhjust rääkida määratlejate grammatisatsioonist artikliteks. Uuritav keelematerjal pärineb pildiseeria põhjal kogutud suulistest narratiividest. Uurimuses osales 20 eesti ja 20 soome keele

  10. X-ray High-resolution Spectroscopy for Laser-produced Plasma

    Science.gov (United States)

    Barbato, F.; Scarpellini, D.; Malizia, A.; Gaudio, P.; Richetta, M.; Antonelli, L.

    The study of the emission spectrum gives information about the material generating the spectrum itself and the condition in which this is generated. The wavelength spectra lines are linked to the specific element and plasma conditions (electron temperature, density), while their shape is influenced by several physical effects like Stark and Doppler ones. In this work we study the X-ray emission spectra of a copper laser-produced plasma by using a spherical bent crystal spectrometer to measure the electron temperature. The facility used is the laser TVLPS, at the Tor Vergata University in Rome. It consists of a Nd:Glass source (in first harmonic - 1064 nm) whose pulse parameters are: 8 J in energy, time duration of 15 ns and a focal spot diameter of 200 μm. The adopted spectrometer is based on a spherical bent crystal of muscovite. The device combines the focusing property of a spherical mirror with the Bragg's law. This allows to obtain a great power resolution but a limited range of analysis. In our case the resolution is on average 80 eV. As it is well-known, the position of the detector on the Rowland's circle is linked to the specific spectral range which has been studied. To select the area to be investigated, we acquired spectra by means of a flat spectrometer. The selected area is centered on 8.88 Å. To calibrate the spectrum we wrote a ray-tracing MATLAB code, which calculates the detector alignment parameters and calibration curve. We used the method of line ratio to measure the electron temperature. This is possible because we assumed the plasma to be in LTE condition. The temperature value was obtained comparing the experimental one, given by the line ratio, with the theoretical one, preceded by FLYCHK simulations.

  11. Isolation and screening of strains producing high amounts of rutin degrading enzymes from Fagopyrum tataricum seeds.

    Science.gov (United States)

    Zheng, Ya-Di; Luo, Qing-Lin; Zhou, Mei-Liang; Wang, De-Zhou; Zhang, Ye-Dong; Shao, Ji-Rong; Zhu, Xue-Mei; Tang, Yu

    2013-02-01

    The rutin degrading enzyme (RDE) was isolated and purified from tartary buckwheat seeds. The RDE was purified about 11.34-fold and its final yield was 3.5%, which was very low, due to our purification strategy of giving priority to purity over yield. The RDE molecular weight was estimated to be about 60 kDa. When rutin was used as substrate, an optimal enzyme activity was seen at around pH 5.0 and 40 °C. Strains isolation strategy characterized by the use of rutin as sole carbon source in enrichment cultures was used to isolate RDE-producing strains. Then the active strains were identified by morphology characterization and 18s rDNA-ITS (Internal Transcribed Spacer) gene sequencing. Three isolates coded as B3, W2, Y2 were successfully isolated from fusty Fagopyrum tataricum flour cultures. Strain B3 possessed the highest unit activity among these three strains, and its total activity reached up to 171.0 Unit. The active isolate (B3) could be assigned to Penicillium farinosum. When the Penicillium farinosum strains were added to tartary buckwheat flour cultures at pH 5.0, 30 °C after 5 days fermentation, the quercetin production raised up to 1.78 mg/l, almost 5.1 times higher than the fermentation without the above active strains. Hence, a new approach was available to utilize microorganism-aided fermentation for effective quercetin extraction from Fagopyrum tataricum seeds. © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Influence of negative energy balance on cyclicity and fertility in the high producing dairy cow.

    Science.gov (United States)

    Wathes, D C; Fenwick, M; Cheng, Z; Bourne, N; Llewellyn, S; Morris, D G; Kenny, D; Murphy, J; Fitzpatrick, R

    2007-09-01

    The peripartum period is of critical importance to subsequent health and fertility. Most cows enter a state of negative energy balance (NEB) associated with many metabolic changes which have carry over effects on the resumption and normality of estrous cyclicity and the success of subsequent inseminations. A dataset on 500 lactations explored the relationships between metabolic traits measured before and after calving with fertility. Stepwise multiple regression analysis showed that longer calving to conception intervals were associated with altered profiles of IGF-I, urea and body condition score. These relationships between metabolic profiles and fertility differed between first lactation cows (which are still growing but produce less milk) and mature animals. Early postpartum the liver undergoes extensive biochemical and morphological modifications to adapt to NEB, the uterus is extensively remodeled and must clear bacterial infections, and the ovary must resume ovulatory cycles. RNA isolated from liver and uterine tissues harvested 2 weeks postpartum from cows in mild (MNEB) and severe (SNEB) energy balance was used to screen the Affymetrix 23K bovine microarray. In liver, SNEB resulted in differential expression of key genes involved in lipid catabolism, gluconeogenesis, and the synthesis and stability of IGF-I. This was accompanied by reduced systemic concentrations of IGF-I which is likely to impact on ovarian function and early embryo development. Within endometrium, cows in SNEB showed histological evidence for higher levels of inflammation and the microarray analysis identified groups of differentially expressed genes involved in tissue remodeling and immune response. This may delay uterine repair after calving, likely contributing to the observed reduction in fertility.

  13. Enhanced performance on high current discharges in JET produced by ICRF heating during the current rise

    International Nuclear Information System (INIS)

    Bures, M.; Bhatnagar, V.; Cotrell, G.; Corti, S.; Christiansen, J.P.; Hellsten, T.; Jacquinot, J.; Lallia, P.; Lomas, P.; O'Rourke, J.; Taroni, A.; Tibone, F.; Start, D.F.H.

    1989-01-01

    The performance of high current discharges can be increased by applying central ICRF heating before or shortly after the onset of sawtooth activity in the plasma current rise phase. Sawtooth-free periods have been obtained resulting in the enhanced discharge performance. High T e (0) 9 - 10.5 keV with peaked profiles T e (0)/ e > = 3 - 4 were obtained giving values of n e (0)T e (0) up to 6x10 20 (keV m -3 ). Improvements in T i (0) and neutron production are observed. A 60 % enhancement in D-D reaction rate from 2nd harmonic deuterium (2ω CD ) heating appears to be present. In all current rise (CR) discharges radiation amounts to 25-50 % of total power. (author) 4 refs., 6 figs

  14. Using self-generated harmonics as a diagnostic of high intensity laser-produced plasmas

    International Nuclear Information System (INIS)

    Krushelnick, K; Watts, I; Tatarakis, M; Gopal, A; Wagner, U; Beg, F N; Clark, E L; Clarke, R J; Dangor, A E; Norreys, P A; Wei, M S; Zepf, M

    2002-01-01

    The interaction of high intensity laser pulses (up to I∼10 20 W cm -2 ) with plasmas can generate very high order harmonics of the laser frequency (up to the 75th order have been observed). Measurements of the properties of these harmonics can provide important insights into the plasma conditions which exist during such interactions. For example, observations of the spectrum of the harmonic emission can provide information of the dynamics of the critical surface as well as information on relativistic non-linear optical effects in the plasma. However, most importantly, observations of the polarization properties of the harmonics can provide a method to measure the ultra-strong magnetic fields (greater than 350 MG) which can be generated during these interactions. It is likely that such techniques can be scaled to provide a significant amount of information from experiments at even higher intensities

  15. Inverse metal-assisted chemical etching produces smooth high aspect ratio InP nanostructures.

    Science.gov (United States)

    Kim, Seung Hyun; Mohseni, Parsian K; Song, Yi; Ishihara, Tatsumi; Li, Xiuling

    2015-01-14

    Creating high aspect ratio (AR) nanostructures by top-down fabrication without surface damage remains challenging for III-V semiconductors. Here, we demonstrate uniform, array-based InP nanostructures with lateral dimensions as small as sub-20 nm and AR > 35 using inverse metal-assisted chemical etching (I-MacEtch) in hydrogen peroxide (H2O2) and sulfuric acid (H2SO4), a purely solution-based yet anisotropic etching method. The mechanism of I-MacEtch, in contrast to regular MacEtch, is explored through surface characterization. Unique to I-MacEtch, the sidewall etching profile is remarkably smooth, independent of metal pattern edge roughness. The capability of this simple method to create various InP nanostructures, including high AR fins, can potentially enable the aggressive scaling of InP based transistors and optoelectronic devices with better performance and at lower cost than conventional etching methods.

  16. Heat exchanger for transfering heat produced in a high temperature reactor to an intermediate circuit gas

    International Nuclear Information System (INIS)

    Barchewitz, E.; Baumgaertner, H.

    1985-01-01

    The invention is concerned with improving the arrangement of a heat exchanger designed to transfer heat from the coolant gas circuit of a high temperature reactor to a gas which is to be used for a process heat plant. In the plant the material stresses are to be kept low at high differential pressures and temperatures. According to the invention the tube bundles designed as boxes are fixed within the heat exchanger closure by means of supply pipes having got loops. For conducting the hot gas the heat exchanger has got a central pipe leading out of the reactor vessel through the pod closure and having got only one point of fixation, lying in this closure. Additional advantageous designs are mentioned. (orig./PW)

  17. Crystalline and amorphous phases in carbon nitride films produced by intense high-pressure plasma

    International Nuclear Information System (INIS)

    Gurarie, V.N.; Orlov, A.V.; Bursill, L.A.; JuLin, P.; Nugent, K.W.; Chon, J.W.; Prawer, S.

    1997-01-01

    Carbon-nitride films are prepared using a high-intensity pulsed plasma deposition technique. A wide range of nitrogen pressure and discharge intensity are used to investigate their effect on the morphology, nitrogen content, structure, bonding, phase composition and mechanical characteristics of the CN films deposited. Increasing the nitrogen pressure from 0.1 atm to 10 atm results in an increase of nitrogen incorporation into CN films to maximum of 45 at %. Under the high-energy density deposition conditions which involve ablation of the quartz substrate the CN films are found to incorporate in excess of 60 at %N. Raman spectra of these films contain sharp peaks characteristic of a distinct crystalline CN phase. TEM diffraction patterns for the films deposited below 1 atm unambiguously show the presence of micron-sized crystals displaying a cubic symmetry. (authors)

  18. Temporal Effects of High Dietary Zinc on the Histological Changes Produced in White Leghorn Cocks

    OpenAIRE

    Eltohamy, Magda Mohammed; Takahara, Hitoshi; Okamoto, Masao; 高原, 斉; 岡本, 正夫

    1980-01-01

    Effects of high dietary Zn on histological changes of the endocrine glands were investigated in White Leghorn cocks. Cocks received 1000 ppm dietary Zn showed normal testicular development. In the groups received 3000 and 4000 ppm dietary Zn, the inhibitory effects in the testes suggested impaired production and/or release of adenohypophysial gonadotrophic hormone. Adenohypophysis of the group received 1000 ppm dietary Zn showed an increase in PAS-positive materials of the basophils, while ad...

  19. Culture of a high-chlorophyll-producing and halotolerant Chlorella vulgaris.

    Science.gov (United States)

    Nakanishi, Koichi; Deuchi, Keiji

    2014-05-01

    In order to increase the value of freshwater algae as raw ingredients for health foods and feed for seawater-based farmed fish, we sought to breed high-chlorophyll halotolerant Chlorella with the objective of generating strains with both high chlorophyll concentrations (≥ 5%) and halotolerance (up to 1% NaCl). We used the Chlorella vulgaris K strain in our research institute culture collection and induced mutations with UV irradiation and acriflavine which is known to effect mutations of mitochondrial DNA that are associated with chlorophyll production. Screenings were conducted on seawater-based "For Chlorella spp." (FC) agar medium, and dark-green-colored colonies were visually selected by macroscopic inspection. We obtained a high-chlorophyll halotolerant strain (designated C. vulgaris M-207A7) that had a chlorophyll concentration of 6.7% (d.m.), a level at least three-fold higher than that of K strain. This isolate also exhibited a greater survival rate in seawater that of K strain. Copyright © 2013 The Society for Biotechnology, Japan. Published by Elsevier B.V. All rights reserved.

  20. A hybrid approach identifies metabolic signatures of high-producers for chinese hamster ovary clone selection and process optimization.

    Science.gov (United States)

    Popp, Oliver; Müller, Dirk; Didzus, Katharina; Paul, Wolfgang; Lipsmeier, Florian; Kirchner, Florian; Niklas, Jens; Mauch, Klaus; Beaucamp, Nicola

    2016-09-01

    In-depth characterization of high-producer cell lines and bioprocesses is vital to ensure robust and consistent production of recombinant therapeutic proteins in high quantity and quality for clinical applications. This requires applying appropriate methods during bioprocess development to enable meaningful characterization of CHO clones and processes. Here, we present a novel hybrid approach for supporting comprehensive characterization of metabolic clone performance. The approach combines metabolite profiling with multivariate data analysis and fluxomics to enable a data-driven mechanistic analysis of key metabolic traits associated with desired cell phenotypes. We applied the methodology to quantify and compare metabolic performance in a set of 10 recombinant CHO-K1 producer clones and a host cell line. The comprehensive characterization enabled us to derive an extended set of clone performance criteria that not only captured growth and product formation, but also incorporated information on intracellular clone physiology and on metabolic changes during the process. These criteria served to establish a quantitative clone ranking and allowed us to identify metabolic differences between high-producing CHO-K1 clones yielding comparably high product titers. Through multivariate data analysis of the combined metabolite and flux data we uncovered common metabolic traits characteristic of high-producer clones in the screening setup. This included high intracellular rates of glutamine synthesis, low cysteine uptake, reduced excretion of aspartate and glutamate, and low intracellular degradation rates of branched-chain amino acids and of histidine. Finally, the above approach was integrated into a workflow that enables standardized high-content selection of CHO producer clones in a high-throughput fashion. In conclusion, the combination of quantitative metabolite profiling, multivariate data analysis, and mechanistic network model simulations can identify metabolic

  1. Can pions created in high-energy heavy-ion collisions produce a Centauro-type effect?

    International Nuclear Information System (INIS)

    Martinis, M.; Mikuta-Martinis, V.; Crnugelj, J.

    1995-01-01

    We study a Centauro-type phenomenon in high-energy heavy-ion collisions by assuming that pions are produced semiclassically both directly and in pairs through the isovector channel. The leading-particle effect and the factorization property of the scattering amplitude in the impact-parameter space are used to define the classical pion field. We show that the Centauro-type effect is strongly suppressed if a large number of pions are produced in isovector pairs. Our conclusion is supported through the calculation of two pion correlation parameters, f 2 0- and f 2 00 , as well as f 2, n - 0 and the average number of neutral pions (left-angle n 0 right-angle n- ) a a function of negative pions (n - ) produced

  2. Sound produced by an oscillating arc in a high-pressure gas

    Science.gov (United States)

    Popov, Fedor K.; Shneider, Mikhail N.

    2017-08-01

    We suggest a simple theory to describe the sound generated by small periodic perturbations of a cylindrical arc in a dense gas. Theoretical analysis was done within the framework of the non-self-consistent channel arc model and supplemented with time-dependent gas dynamic equations. It is shown that an arc with power amplitude oscillations on the order of several percent is a source of sound whose intensity is comparable with external ultrasound sources used in experiments to increase the yield of nanoparticles in the high pressure arc systems for nanoparticle synthesis.

  3. High impact strength polymers having novel nano-structures produced via reactive extrusion

    Science.gov (United States)

    Tortorella, Nathan Fraser

    A major focus of scientists and engineers over the last century has been to increase the impact strength and therefore reduce the brittleness of materials. By altering and adding energy absorption mechanisms, brittle failure can be averted. Isotactic polypropylene (PP) is the focus of this dissertation because it is an extremely low cost, high volume, versatile plastic but behaves in a brittle manner at or below room temperature or in a notched state. Early work on impact modification of polypropylene focused on blending energy-absorbing low density elastomers and rubbers. These binary blends all had a common problem---an increase in impact strength was paralleled by a significant decrease in both elastic modulus and yield stress. Reactive extrusion processing has allowed the in-situ compatibilization of isotactic polypropylene and metallocene-catalyzed ethylene-octene copolymers (EOCs). This process involves combining both the comonomer and vector fluid approaches to grafting polyolefins. Styrene monomer and a multifunctional acrylate monomer undergo peroxide-induced copolymerization and grafting in the presence of both PP and EOC. This results in a phase separated alloy with an impact strength over 13 times that of pure polypropylene and double that of the physical blend. There is also a significant improvement in stress-strain performance when comparing the alloys to physical blend counterparts. Many researchers have categorized the necessary components to toughening polypropylene as pertaining to the amorphous phase. The alloys described in this dissertation meet the criteria put forth by these researchers, namely low density, crystallinity, and modulus of the elastomer phase, sub-micron particle diameter, close inter-particle distance, and a high degree of entanglements of both the PP matrix phase and EOC minor phase. But many people neglect to study the crystalline state of impact modified PP in conjunction with the amorphous phase. This work shows that the

  4. Time-resolved Thomson scattering on high-intensity laser-produced hot dense helium plasmas

    International Nuclear Information System (INIS)

    Sperling, P; Liseykina, T; Bauer, D; Redmer, R

    2013-01-01

    The introduction of brilliant free-electron lasers enables new pump–probe experiments to characterize warm and hot dense matter states, i.e. systems at solid-like densities and temperatures of one to several hundred eV. Such extreme conditions are relevant for high-energy density studies such as, e.g., in planetary physics and inertial confinement fusion. We consider here a liquid helium jet pumped with a high-intensity optical short-pulse laser that is subsequently probed with brilliant soft x-ray radiation. The optical short-pulse laser generates a strongly inhomogeneous helium plasma which is characterized with particle-in-cell simulations. We derive the respective Thomson scattering spectrum based on the Born–Mermin approximation for the dynamic structure factor considering the full density and temperature-dependent Thomson scattering cross section throughout the target. We observe plasmon modes that are generated in the interior of the target and study their temporal evolution. Such pump–probe experiments are promising tools to measure the important plasma parameters density and temperature. The method described here can be applied to various pump–probe scenarios by combining optical lasers, soft x-rays and hard x-ray sources. (paper)

  5. Enhanced performance of high current discharges in JET produced by ICRF heating during the current rise

    International Nuclear Information System (INIS)

    Bures, M.; Bhatnagar, V.; Christiansen, J.P.

    1989-01-01

    The performance of high current discharges can be improved by applying central ICRF heating before or shortly after the onset of sawtooth activity in the plasma current rise phase. Long sawtooth-free periods have been obtained which result in a transiently-enhanced discharge performance. High T c (0) = 9-10.5 keV with peaked profile T e (0)/ e > = 3-4 were obtained giving values of N e (0)T e (0) up to 6 x 10 20 (keV m -3 ). Improvements in T i (0) and neutron production are observed. A best value of n Dd (0)T i (0)τ E = 1.65 x 10 20 (m -3 keV s) was achieved. Local transport simulation shows that the electron and ion thermal diffusivities do not differ substantially in the two cases of current-rise (CR) and flat-top (FT) heating, the performance of the central plasma region being enhanced, in the case of current-rise, entirely by the elimination of the sawtooth instability. The maximum D-D reaction rate is enhanced by a factor of 2 compared to the flat-top value. An appreciable part of the reaction rate is attributed to 2nd harmonic deuterium (2ω CD ) heating. In all current-rise discharges radiation amounts to 25-50% of total power and Ζ eff remains roughly constant. (author)

  6. Co-Immobilization of Proteins and DNA Origami Nanoplates to Produce High-Contrast Biomolecular Nanoarrays.

    Science.gov (United States)

    Hager, Roland; Burns, Jonathan R; Grydlik, Martyna J; Halilovic, Alma; Haselgrübler, Thomas; Schäffler, Friedrich; Howorka, Stefan

    2016-06-01

    The biofunctionalization of nanopatterned surfaces with DNA origami nanostructures is an important topic in nanobiotechnology. An unexplored challenge is, however, to co-immobilize proteins with DNA origami at pre-determined substrate sites in high contrast relative to the nontarget areas. The immobilization should, in addition, preferably be achieved on a transparent substrate to allow ultrasensitive optical detection. If successful, specific co-binding would be a step towards stoichiometrically defined arrays with few to individual protein molecules per site. Here, we successfully immobilize with high specificity positively charged avidin proteins and negatively charged DNA origami nanoplates on 100 nm-wide carbon nanoislands while suppressing undesired adsorption to surrounding nontarget areas. The arrays on glass slides achieve unprecedented selectivity factors of up to 4000 and allow ultrasensitive fluorescence read-out. The co-immobilization onto the nanoislands leads to layered biomolecular architectures, which are functional because bound DNA origami influences the number of capturing sites on the nanopatches for other proteins. The novel hybrid DNA origami-protein nanoarrays allow the fabrication of versatile research platforms for applications in biosensing, biophysics, and cell biology, and, in addition, represent an important step towards single-molecule protein arrays. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Dynamics of ZnO laser produced plasma in high pressure argon

    International Nuclear Information System (INIS)

    Kaydashev, V.E.; Lunney, J.G.

    2011-01-01

    Pulsed laser deposition of ZnO in high pressure gas offers a route for the catalyst-free preparation of ZnO nanorods less than 10 nm in diameter. This paper describes the results of some experiments to investigate the laser plume dynamics in the high gas pressure (5 x 10 3 -10 4 Pa) regime used for PLD of ZnO nanorods. In this regime the ablation plume is strongly coupled to the gas and the plume expansion is brought to a halt within about 1 cm from the target. A 248 nm excimer laser was used to ablate a ceramic ZnO target in various pressures of argon. Time- and space-resolved UV/vis emission spectroscopy and Langmuir probe measurements were used to diagnose the plasma and follow the plume dynamics. By measuring the spatial profiles of Zn I and Zn II spectral lines it was possible to follow the propagation of the external and internal shock waves associated with the interaction of the ablation plume with the gas. The Langmuir probe measurements showed that the electron density was 10 9 -10 10 cm -3 and the electron temperature was several eV. At these conditions the ionization equilibrium is described by the collisional-radiative model. The plume dynamics was also studied for ZnO targets doped with elements which are lighter (Mg), comparable to (Ga), and heavier (Er) than Zn, to see if there is any elemental segregation in the plume.

  8. Structure and blood compatibility of highly oriented PLA/MWNTs composites produced by solid hot drawing.

    Science.gov (United States)

    Li, Zhengqiu; Zhao, Xiaowen; Ye, Lin; Coates, Phil; Caton-Rose, Fin; Martyn, Michasel

    2014-03-01

    Highly oriented poly(lactic acid) (PLA)/multi-walled carbon nanotubes (MWNTs) composites were fabricated through solid hot drawing technology in an effort to improve the mechanical properties and blood biocompatibility of PLA as blood-contacting medical devices. It was found that proper MWNTs content and drawing orientation can improve the tensile strength and modulus of PLA dramatically. With the increase in draw ratio, the cold crystallization peak became smaller, and the glass transition and the melting peak of PLA moved to high temperature, while the crystallinity increased, and the grain size decreased, indicating the stress-induced crystallization of PLA during drawing. MWNTs showed a nucleation effect on PLA, leading to the rise in the melting temperature, increase in crystallinity and reduction of spherulite size for the composites. Moreover, the intensity of (002) diffraction of MWNTs increased with draw ratio, indicating that MWNTs were preferentially aligned and oriented during drawing. Microstructure observation demonstrated that PLA matrix had an ordered fibrillar bundle structure, and MWNTs in the composite tended to align parallel to the drawing direction. In addition, the dispersion of MWNTs in PLA was also improved by orientation. Introduction of MWNTs and drawing orientation could significantly enhance the blood compatibility of PLA by prolonging kinetic clotting time, reducing hemolysis ratio and platelet activation.

  9. Microstructure Characterization of WCCo-Mo Based Coatings Produced Using High Velocity Oxygen Fuel

    Directory of Open Access Journals (Sweden)

    Serkan Islak

    2015-12-01

    Full Text Available The present study has been carried out in order to investigate the microstructural properties of WCCo-Mo composite coatings deposited onto a SAE 4140 steel substrate by high velocity oxygen fuel (HVOF thermal spray. For this purpose, the Mo quantity added to the WCCo was changed as 10, 20, 30 and 40 wt. % percents. The coatings are compared in terms of their phase composition, microstructure and hardness. Phase compound and microstructure of coating layers were examined using X-ray diffractometer (XRD and scanning electron microscope (SEM. XRD results showed that WCCo-Mo composite coatings were mainly composed of WC, W2C, Co3W3C, Mo2C, MoO2, Mo and Co phases. The average hardness of the coatings increased with increasing Mo content.

  10. High yield antibiotic producing mutants of Streptomyces erythreus induced by low energy ion implantation

    Science.gov (United States)

    Yu, Chen; Zhixin, Lin; Zuyao, Zou; Feng, Zhang; Duo, Liu; Xianghuai, Liu; Jianzhong, Tang; Weimin, Zhu; Bo, Huang

    1998-05-01

    Conidia of Streptomyces erythreus, an industrial microbe, were implanted by nitrogen ions with energy of 40-60 keV and fluence from 1 × 10 11 to 5 × 10 14 ions/cm 2. The logarithm value of survival fraction had good linear relationship with the logarithm value of fluence. Some mutants with a high yield of erythromycin were induced by ion implantation. The yield increment was correlated with the implantation fluence. Compared with the mutation results induced by ultraviolet rays, mutation effects of ion implantation were obvious having higher increasing erythromycin potency and wider mutation spectrum. The spores of Bacillus subtilis were implanted by arsenic ions with energy of 100 keV. The distribution of implanted ions was measured by Rutherford Backscattering Spectrometry (RBS) and calculated in theory. The mechanism of mutation induced by ion implantation was discussed.

  11. Angular correlations in proton-proton collisions producing a high transverse momentum pi /sup 0/

    CERN Document Server

    Eggert, K; Betev, B; Darriulat, Pierre; Derado, I; Dittman, P; Eckardt, V; Gebauer, H J; Giboni, K L; Holder, M; Kaltwasser, J; McDonald, K T; Meinke, R; Modis, T; Pugh, H G; Sander, O R; Seyboth, P; Thomé, W; Tittel, K; Uhlig, S; Vesztergombi, G

    1975-01-01

    In an experiment at the CERN ISR a streamer chamber detector surrounding one of the intersection regions was triggered on large transverse momentum pi /sup 0,/s by means of an array of lead-glass counters. The directions of charged particles and gamma -rays converted in lead-oxide plates inside the streamer chamber were measured. Data were taken at a c.m. energy of square root s=53 GeV at two production angles of the high p/sub T/ pi /sup 0/ (90 degrees and 53 degrees ). They indicate an enhancement of particles mostly in the hemisphere opposite to the pi /sup 0/. In the 53 degrees data, a shift of this enhancement towards rapidities opposite to the rapidity of the pi /sup 0/ and confined to a +or-30 degrees azimuthal region around the collision plane is observed. (16 refs).

  12. Annoyance to Noise Produced by a Distributed Electric Propulsion High-Lift System

    Science.gov (United States)

    Rizzi, Stephen A.; Palumbo, Daniel L.; Rathsam, Jonathan; Christian, Andrew; Rafaelof, Menachem

    2017-01-01

    A psychoacoustic test was performed using simulated sounds from a distributed electric propulsion aircraft concept to help understand factors associated with human annoyance. A design space spanning the number of high-lift leading edge propellers and their relative operating speeds, inclusive of time varying effects associated with motor controller error and atmospheric turbulence, was considered. It was found that the mean annoyance response varies in a statistically significant manner with the number of propellers and with the inclusion of time varying effects, but does not differ significantly with the relative RPM between propellers. An annoyance model was developed, inclusive of confidence intervals, using the noise metrics of loudness, roughness, and tonality as predictors.

  13. Improved High Current Liquid and Gas Targets for Cyclotron Produced Radioisotopes (Turkey)

    Energy Technology Data Exchange (ETDEWEB)

    Kivrakdal, Deniz; Ustaoğlu, Özgur; Soylu, Ayfer [Eczacibasi Nuclear Products Inc. (Turkey)

    2009-07-01

    As positron emitting radiopharmaceuticals gain interest in nuclear medicine, more and more baby cyclotrons are installed. The number of cyclotrons in Turkey went up to nine whereas the number of PET or PET/CT cameras increased more than 50% within a year. At the moment there are 65 positron imaging cameras serving a population of around 70 million. Eczacıbası - Monrol Nuclear Products Industry and Trade Inc. has five cyclotrons three of them being of different brands. In this report production data collected with these cyclotrons using high current liquid targets of silver, tantalum and niobium will be presented. The data presented here covers the whole duration of the project. Another topic which will be discussed here is the work carried out about purification and analysis of used O-18 water for re-use purposes. (author)

  14. Hot impact densification: a new method for producing high density ceramic pellets with close shape tolerances

    International Nuclear Information System (INIS)

    Hrovat, M.; Huschka, H.; Muhling, G.; Rachor, L.; Zimmerman, H.

    1982-01-01

    Density and correct diameter of nuclear fuel pellets are usually achieved by sintering and subsequent circular grinding. Hot impact densification (HID) thermally squatted ceramic bodies can be directly high speed precision-molded in a cold die. For thermoshock-sensitive materials, a controlled cooling down procedure of some minutes is added. The feasibility of HID has been demonstrated on the laboratory scale on UO 2 , UC, and some more materials at temperatures between 1700 and 2300 0 C, pressures up to 800 N/mm 2 . Shape tolerances are close, density can be exactly reproduced within a wide range. Tool wear seems to be no problem. Currently, a prototype facility for continuous performance is being developed

  15. Widespread occurrence of neonicotinoid insecticides in streams in a high corn and soybean producing region, USA

    Science.gov (United States)

    Hladik, Michelle; Kolpin, Dana W.; Kuivila, Kathryn

    2014-01-01

    Neonicotinoid insecticides are of environmental concern, but little is known about their occurrence in surface water. An area of intense corn and soybean production in the Midwestern United States was chosen to study this issue because of the high agricultural use of neonicotinoids via both seed treatments and other forms of application. Water samples were collected from nine stream sites during the 2013 growing season. The results for the 79 water samples documented similar patterns among sites for both frequency of detection and concentration (maximum:median) with clothianidin (75%, 257 ng/L:8.2 ng/L) > thiamethoxam (47%, 185 ng/L: imidacloprid (23%, 42.7 ng/L: <2 ng/L). Neonicotinoids were detected at all nine sites sampled even though the basin areas spanned four orders of magnitude. Temporal patterns in concentrations reveal pulses of neonicotinoids associated with rainfall events during crop planting, suggesting seed treatments as their likely source.

  16. High ethanol tolerance of the thermophilic anaerobic ethanol producer Thermoanaerobacter BG1L1

    DEFF Research Database (Denmark)

    Georgieva, Tania I.; Mikkelsen, Marie Just; Ahring, Birgitte Kiær

    2007-01-01

    The low ethanol tolerance of thermophilic anaerobic bacteria, generally less than 2% (v/v) ethanol, is one of the main limiting factors for their potential use for second generation fuel ethanol production. In this work, the tolerance of thermophilic anaerobic bacterium Thermoanaerobacter BG 1L1...... to exogenously added ethanol was studied in a continuous immobilized reactor system at a growth temperature of 70 degrees C. Ethanol tolerance was evaluated based on inhibition of fermentative performance e.g.. inhibition of substrate conversion. At the highest ethanol concentration tested (8.3% v/v), the strain...... was able to convert 42% of the xylose initially present, indicating that this ethanol concentration is not the upper limit tolerated by the strain. Long-term strain adaptation to high ethanol concentrations (6 - 8.3%) resulted in an improvement of xylose conversion by 25% at an ethanol concentration of 5...

  17. High energy density in matter produced by heavy ion beams. Annual report 1993

    International Nuclear Information System (INIS)

    1994-06-01

    The experimental activities at GSI were concentrated on the progress in beam-plasma interaction experiments of heavy ion with ionized matter, plasma -lens forming devices, intense beam at high temperature experimental area, and charge exchange collisions of ions. The development to higher intensities and phase space densities during 1993 for the SIS and the ESR is recorded. The possibility of studying of funneling of two beams in a two-beam RFQ is studied. Specific results are presented with respect to inertial confinement fusion (ICF). The problem of ion stopping in plasma and pumping X-ray lasers with heavy ion beams are discussed. Various contributions deal with dense plasma effects, shocks and opacity. (HP)

  18. Rationale for continuing R&D in direct coal conversion to produce high quality transportation fuels

    Energy Technology Data Exchange (ETDEWEB)

    Srivastava, R.D.; McIlvried, H.G. [Burns and Roe Services Corp., Pittsburgh, PA (United States); Gray, D. [Mitre Corp, McLean, VA (United States)] [and others

    1995-12-31

    For the foreseeable future, liquid hydrocarbon fuels will play a significant role in the transportation sector of both the United States and the world. Factors favoring these fuels include convenience, high energy density, and the vast existing infrastructure for their production and use. At present the U.S. consumes about 26% of the world supply of petroleum, but this situation is expected to change because of declining domestic production and increasing competition for imports from countries with developing economies. A scenario and time frame are developed in which declining world resources will generate a shortfall in petroleum supply that can be allieviated in part by utilizing the abundant domestic coal resource base. One option is direct coal conversion to liquid transportation fuels. Continued R&D in coal conversion technology will results in improved technical readiness that can significantly reduce costs so that synfuels can compete economically in a time frame to address the shortfall.

  19. A Study of High Transverse Momentum Electrons Produced in pp Collisions at 540 GeV

    DEFF Research Database (Denmark)

    Bagnaia, P; Kofoed-Hansen, O.

    1984-01-01

    The production of electrons with very high transverse momentum has been studied in the UA2 experiment at the CERN [`(p)]ppp collider ( Öss =540 GeV). From a sample of events containing an electron candidate withp T >15 GeV/c, we extract a clear signal resulting from the production of the charged...... intermediate vector bosonW ±, which subsequently decays into an electron and a neutrino. We study theW production and decay properties. Further-more, we refine our results on the production and decay of the neutral vector bosonZ 0. Finally, we compare the experimental results to the predictions of the standard...

  20. Widespread occurrence of neonicotinoid insecticides in streams in a high corn and soybean producing region, USA

    Science.gov (United States)

    Hladik, Michelle; Kolpin, Dana W.; Kuivila, Kathryn

    2014-01-01

    Neonicotinoid insecticides are of environmental concern, but little is known about their occurrence in surface water. An area of intense corn and soybean production in the Midwestern United States was chosen to study this issue because of the high agricultural use of neonicotinoids via both seed treatments and other forms of application. Water samples were collected from nine stream sites during the 2013 growing season. The results for the 79 water samples documented similar patterns among sites for both frequency of detection and concentration (maximum:median) with clothianidin (75%, 257 ng/L:8.2 ng/L) > thiamethoxam (47%, 185 ng/L: imidacloprid (23%, 42.7 ng/L: treatments as their likely source.

  1. Improved High Current Liquid and Gas Targets for Cyclotron Produced Radioisotopes (Turkey)

    International Nuclear Information System (INIS)

    Kivrakdal, Deniz; Ustaoğlu, Özgur; Soylu, Ayfer

    2009-01-01

    As positron emitting radiopharmaceuticals gain interest in nuclear medicine, more and more baby cyclotrons are installed. The number of cyclotrons in Turkey went up to nine whereas the number of PET or PET/CT cameras increased more than 50% within a year. At the moment there are 65 positron imaging cameras serving a population of around 70 million. Eczacıbası - Monrol Nuclear Products Industry and Trade Inc. has five cyclotrons three of them being of different brands. In this report production data collected with these cyclotrons using high current liquid targets of silver, tantalum and niobium will be presented. The data presented here covers the whole duration of the project. Another topic which will be discussed here is the work carried out about purification and analysis of used O-18 water for re-use purposes. (author)

  2. Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Canter, Christina E. [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biddy, Mary [National Renewable Energy Lab. (NREL), Golden, CO (United States); Talmadge, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hartley, Damon S. [Idaho National Lab. (INL), Idaho Falls, ID (United States); Snowden-Swan, Lesley [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2015-09-01

    The Department of Energy’s (DOE) Bioenergy Technologies Office (BETO) aims at developing and deploying technologies to transform renewable biomass resources into commercially viable, high-performance biofuels, bioproducts and biopower through public and private partnerships (DOE, 2015). BETO also performs a supply chain sustainability analysis (SCSA). This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for the 2017 design case for feedstock logistics (INL, 2014) and for the 2022 target case for HOG production via IDL (Tan et al., 2015). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. The 2017 design case for feedstock logistics demonstrated a delivered feedstock cost of $80 per dry U.S. short ton by the year 2017 (INL, 2014). The 2022 design case for the conversion process, as modeled in Tan et al. (2015), uses the feedstock 2017 design case blend of biomass feedstocks consisting of pulpwood, wood residue, switchgrass, and construction and demolition waste (C&D) with performance properties consistent with a sole woody feedstock type (e.g., pine or poplar). The HOG SCSA case considers the 2017 feedstock design case (the blend) as well as individual feedstock cases separately as alternative scenarios when the feedstock blend ratio varies as a result of a change in feedstock availability. These scenarios could be viewed as bounding SCSA results because of distinctive requirements for energy and chemical inputs for the production and logistics of different components of the blend feedstocks.

  3. New Crystal-Growth Methods for Producing Lattice-Matched Substrates for High-Temperature Superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Boatner, L.A.

    2008-06-24

    This effort addressed the technical problem of identifying and growing, on a commercial scale, suitable single-crystal substrates for the subsequent deposition of epitaxial thin films of high temperature semiconductors such as GaN/AlN. The lack of suitable lattice-matched substrate materials was one of the major problem areas in the development of semiconducting devices for use at elevated temperatures as well as practical opto-electronic devices based on Al- and GaN technology. Such lattice-matched substrates are necessary in order to reduce or eliminate high concentrations of defects and dislocations in GaN/AlN and related epitaxial thin films. This effort concentrated, in particular, on the growth of single crystals of ZnO for substrate applications and it built on previous ORNL experience in the chemical vapor transport growth of large single crystals of zinc oxide. This combined expertise in the substrate growth area was further complemented by the ability of G. Eres and his collaborators to deposit thin films of GaN on the subject substrates and the overall ORNL capability for characterizing the quality of such films. The research effort consisted of research on the growth of two candidate substrate materials in conjunction with concurrent research on the growth and characterization of GaN films, i.e. the effort combined bulk crystal growth capabilities in the area of substrate production at both ORNL and the industrial partner, Commercial Crystal Growth Laboratories (CCL), Naples, Florida, with the novel thin-film deposition techniques previously developed in the ORNL SSD.

  4. Particles Produced in Association with High Transverse Momentum Single Photons and $\\pi^0$s in Hadronic Collision

    Energy Technology Data Exchange (ETDEWEB)

    Sinanidis, Alexandros Pericles [Northeastern U.

    1989-01-01

    The charged and neutral particles produced in association with high transverse momentum ($Pr_{\\tau}$ > 5.0 GeV /c) photons ($\\gamma$) and neutral pions ($\\pi^0$) in p(Cu+Be) and $\\pi^-$(cu+Be) collisions at vs = 31.5 GeV are studied in this thesis. It was observed that 1) The relative rapidity of the two highest Pr recoiling particles in the events have a jet - like structure. 2) The relative rapidity of the single $\\gamma$ (or $\\pi^0$ ) and the highest $P_{\\tau}$ charged particle accompanying the single $\\gamma$ (or $\\pi^0$ ) show that the high $P_{\\tau} \\pi^0$ events have a jet - like structure in the trigger hemisphere whereas the high $P_{\\tau}$ single $\\gamma$ events do not. 3) The angular distributions of the particles produced in the reactions show that high $P_{\\tau} \\pi^0$s are accompanied by other particles, whereas high $P_{\\tau}$ single photons are relatively isolated. 4) The fragmentation distributions of the recoiling particles from the high $P_{\\tau}$ single photons and $\\pi^0$s are consistent with the measurements of other experiments. 5) The recoiling particles are consistent with the fragmentation of either a quark or a gluon according to the QCD (Quantum Chromodynamics). In summary, particles produced in association with high transverse momentum single photons and $\\pi^0$s in hadronic collisions have been measured and their properties are in good agreement with the predictions of the parton model and those of QCD

  5. Report on health and environmental effects of electromagnetic fields produced by high and very high voltage lines

    International Nuclear Information System (INIS)

    2010-01-01

    In its first part, this report presents some characteristics and properties of electric, magnetic and electromagnetic fields, indicates which are the artificial sources of exposure to very low frequency electromagnetic fields, and gives an overview of some investigations and researches on the exposure to magnetic fields. The second part contains a description of the French high and very high voltage network, its role and development. It also discusses the possibility of burying these lines, and outlines the importance of citizen participation. The third part deals with the potential impacts on health; it comments the results of international studies, discusses the problem of electro-hypersensitivity (EHS) and the relationship between electric and magnetic fields and infantile leukaemia. The fourth part deals with the potential impacts on the environment, animals, agriculture

  6. High Protein- and High Lipid-Producing Microalgae from Northern Australia as Potential Feedstock for Animal Feed and Biodiesel

    OpenAIRE

    Duong, Van Thang; Ahmed, Faruq; Thomas-Hall, Skye R.; Quigley, Simon; Nowak, Ekaterina; Schenk, Peer M.

    2015-01-01

    Microalgal biomass can be used for biodiesel, feed, and food production. Collection and identification of local microalgal strains in the Northern Territory, Australia was conducted to identify strains with high protein and lipid contents as potential feedstock for animal feed and biodiesel production, respectively. A total of 36 strains were isolated from 13 samples collected from a variety of freshwater locations, such as dams, ponds, and streams and subsequently classified by 18S rDNA sequ...

  7. High protein- and high lipid-producing microalgae from Outback Australia as potential feedstock for animal feed and biodiesel

    OpenAIRE

    Van Thang eDuong; Faruq eAhmed; Skye R Thomas-Hall; Katia eNowak; Peer M Schenk

    2015-01-01

    Microalgal biomass can be used for biodiesel, feed and food production. Collection and identification of local microalgal strains in the Northern Territory – Australia was conducted to identify strains with high protein and lipid contents as potential feedstock for animal feed and biodiesel production, respectively. A total of 36 strains were isolated from 13 samples collected from a variety of freshwater locations, such as dams, ponds and streams and subsequently classified by 18S rDNA seque...

  8. Screening and identification of lactic acid bacteria strains with high acid-producing from traditional fermented yak yogurt

    Directory of Open Access Journals (Sweden)

    Chen Xiaoyong

    2017-01-01

    Full Text Available A total of 57 strains of lactic acid bacteria (LAB were isolated and purified from traditional fermented Yak Yogurt in Hongyuan-Sichuan and Yangbajing-Tibet. The strains with high acid-produced were screened by soluble calcium circle and titratable acidity determination. The five strains, 7-1, 22-1, 28-1, 34-1 and 62-1, possessed the high acid-producing and the value of titratable acidity is 196.2, 191.1, 192.2, 194.8 and 200.2 T respectively. Based on 16S rDNA sequence analysis, 22-1 was identified as Lactococcus lactis subsp. lactis, 28-1 as Lactobacillus casei, 34-1 as Lactobacillus fermentium, 7-1 and 62-1 as Enterococcus durans. This study could provide the evidence for researching fermentation strains to improve yogurt quality.

  9. Insights from the genome of a high alkaline cellulase producing Aspergillus fumigatus strain obtained from Peruvian Amazon rainforest.

    Science.gov (United States)

    Paul, Sujay; Zhang, Angel; Ludeña, Yvette; Villena, Gretty K; Yu, Fengan; Sherman, David H; Gutiérrez-Correa, Marcel

    2017-06-10

    Here, we report the complete genome sequence of a high alkaline cellulase producing Aspergillus fumigatus strain LMB-35Aa isolated from soil of Peruvian Amazon rainforest. The genome is ∼27.5mb in size, comprises of 228 scaffolds with an average GC content of 50%, and is predicted to contain a total of 8660 protein-coding genes. Of which, 6156 are with known function; it codes for 607 putative CAZymes families potentially involved in carbohydrate metabolism. Several important cellulose degrading genes, such as endoglucanase A, endoglucanase B, endoglucanase D and beta-glucosidase, are also identified. The genome of A. fumigatus strain LMB-35Aa represents the first whole sequenced genome of non-clinical, high cellulase producing A. fumigatus strain isolated from forest soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  10. Apparatus and method for enhanced chemical processing in high pressure and atmospheric plasmas produced by high frequency electromagnetic waves

    Science.gov (United States)

    Efthimion, Philip C.; Helfritch, Dennis J.

    1989-11-28

    An apparatus and method for creating high temperature plasmas for enhanced chemical processing of gaseous fluids, toxic chemicals, and the like, at a wide range of pressures, especially at atmospheric and high pressures includes an electro-magnetic resonator cavity, preferably a reentrant cavity, and a wave guiding structure which connects an electro-magnetic source to the cavity. The cavity includes an intake port and an exhaust port, each having apertures in the conductive walls of the cavity sufficient for the intake of the gaseous fluids and for the discharge of the processed gaseous fluids. The apertures are sufficiently small to prevent the leakage of the electro-magnetic radiation from the cavity. Gaseous fluid flowing from the direction of the electro-magnetic source through the guiding wave structure and into the cavity acts on the plasma to push it away from the guiding wave structure and the electro-magnetic source. The gaseous fluid flow confines the high temperature plasma inside the cavity and allows complete chemical processing of the gaseous fluids at a wide range of pressures.

  11. Using cuttlefish ink as an additive to produce -non-iridescent structural colors of high color visibility.

    Science.gov (United States)

    Zhang, Yafeng; Dong, Biqin; Chen, Ang; Liu, Xiaohan; Shi, Lei; Zi, Jian

    2015-08-26

    Non-iridescent structural colors of high color visibility are produced by amorphous photonic structures, in which -natural cuttlefish ink is used as an additive to break down the long-range order of the structures. The color hue and its spectral purity can be tuned by adjusting the diameter of the polystyrene (PS) spheres and the proportion of ink particles. © 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  12. Ionization Capabilities of Hydronium Ions and High Electric Fields Produced by Atmospheric Pressure Corona Discharge.

    Science.gov (United States)

    Sato, Natsuhiko; Sekimoto, Kanako; Takayama, Mitsuo

    2016-01-01

    Atmospheric pressure corona discharge (APCD) was applied to the ionization of volatile organic compounds. The mass spectra of analytes having aromatic, phenolic, anilinic, basic and aliphatic in nature were obtained by using vapor supply and liquid smear supply methods. The vapor supply method mainly gave protonated analytes [A+H] + caused by proton transfer from hydronium ion H 3 O + , except for benzene, toluene and n -hexane that have lower proton affinity. The use of the liquid smear supply method resulted in the formation of molecular ion A ·+ and/or dehydride analyte [A-H] + , according to the nature of analytes used. The formation of A ·+ without fragment ions could be explained by the electron tunneling via high electric fields 10 8  V/m at the tip of the corona needle. The dehydride analytes [A-H] + observed in the mass spectra of n -hexane, di- and tributylamines may be explained by the hydride abstraction from the alkyl chains by the hydronium ion. The hydronium ion can play the two-roles for analytes, i.e. , the proton donor to form [A+H] + and the hydride acceptor to form [A-H] + .

  13. High-Amplitude Atlantic Hurricanes Produce Disparate Mortality in Small, Low-Income Countries.

    Science.gov (United States)

    Dresser, Caleb; Allison, Jeroan; Broach, John; Smith, Mary-Elise; Milsten, Andrew

    2016-12-01

    Hurricanes cause substantial mortality, especially in developing nations, and climate science predicts that powerful hurricanes will increase in frequency during the coming decades. This study examined the association of wind speed and national economic conditions with mortality in a large sample of hurricane events in small countries. Economic, meteorological, and fatality data for 149 hurricane events in 16 nations between 1958 and 2011 were analyzed. Mortality rate was modeled with negative binomial regression implemented by generalized estimating equations to account for variable population exposure, sequence of storm events, exposure of multiple islands to the same storm, and nonlinear associations. Low-amplitude storms caused little mortality regardless of economic status. Among high-amplitude storms (Saffir-Simpson category 4 or 5), expected mortality rate was 0.72 deaths per 100,000 people (95% confidence interval [CI]: 0.16-1.28) for nations in the highest tertile of per capita gross domestic product (GDP) compared with 25.93 deaths per 100,000 people (95% CI: 13.30-38.55) for nations with low per capita GDP. Lower per capita GDP and higher wind speeds were associated with greater mortality rates in small countries. Excessive fatalities occurred when powerful storms struck resource-poor nations. Predictions of increasing storm amplitude over time suggest increasing disparity between death rates unless steps are taken to modify the risk profiles of poor nations. (Disaster Med Public Health Preparedness. 2016;10:832-837).

  14. Combined effect of noise and vibration produced by high-speed trains on annoyance in buildings.

    Science.gov (United States)

    Lee, Pyoung Jik; Griffin, Michael J

    2013-04-01

    The effects of noise and vibration on annoyance in buildings during the passage of a nearby high-speed train have been investigated in a laboratory experiment with recorded train noise and 20 Hz vibration. The noises included the effects of two types of façade: windows-open and windows-closed. Subjects were exposed to six levels of noise and six magnitudes of vibration, and asked to rate annoyance using an 11-point numerical scale. The experiment consisted of four sessions: (1) evaluation of noise annoyance in the absence of vibration, (2) evaluation of total annoyance from simultaneous noise and vibration, (3) evaluation of noise annoyance in the presence of vibration, and (4) evaluation of vibration annoyance in the absence of noise. The results show that vibration did not influence ratings of noise annoyance, but that total annoyance caused by combined noise and vibration was considerably greater than the annoyance caused by noise alone. The noise annoyance and the total annoyance caused by combined noise and vibration were associated with subject self-ratings of noise sensitivity. Two classical models of total annoyance due to combined noise sources (maximum of the single source annoyance or the integration of individual annoyance ratings) provided useful predictions of the total annoyance caused by simultaneous noise and vibration.

  15. High cell density cultures produced by internal retention: application in continuous ethanol fermentation

    Directory of Open Access Journals (Sweden)

    Berta Carola Pérez

    2004-07-01

    Full Text Available Ethanol has provoked great interest due to its potential as an alternative fuel. Nevertheless, fermentation processes must be developed by increasing the low volumetric productivity achieved in conventional cultures (batch or continuous to make this product become economically competitive. This can be achieved by using techniques leading to high cell concentration and reducing inhibition by the end-product. One of the frequently employed methods involves cell recycling. This work thus developed a membrane reactor incorporating a filtration module with 5 u,m stainless steel tubular units inside a 3L stirred jar fermenter for investigating its application in continuous ethanol production. The effects of cell concentration and transmembrane pressure difference on permeate flux were evaluated for testing the filtration module's performance. The internal cell retention system was operated in Saccharomyces cerevisiae continuous culture derived from sucrose, once fermentation conditions had been selected (30 °C, 1.25 -1.75 vvm, pH 4.5. Filter unit permeability was maintained by applying pulses of air. More than 97% of the grown cells were retained in the fermenter, reaching 51 g/L cell concentration and 8.51 g/L.h average ethanol productivity in culture with internal cell retention; this was twice that obtained in a conventional continuous culture. Key words: Membrane reactor, Saccharomyces cerevisiae, alcoholic fermentation, cell recycling.

  16. Aluminium Foam and Magnesium Compound Casting Produced by High-Pressure Die Casting

    Directory of Open Access Journals (Sweden)

    Iban Vicario

    2016-01-01

    Full Text Available Nowadays, fuel consumption and carbon dioxide emissions are two of the main focal points in vehicle design, promoting the reduction in the weight of vehicles by using lighter materials. The aim of the work is to evaluate the influence of different aluminium foams and injection parameters in order to obtain compound castings with a compromise between the obtained properties and weight by high-pressure die cast (HPDC using aluminium foams as cores into a magnesium cast part. To evaluate the influence of the different aluminium foams and injection parameters on the final casting products quality, the type and density of the aluminium foam, metal temperature, plunger speed, and multiplication pressure have been varied within a range of suitable values. The obtained compound HPDC castings have been studied by performing visual and RX inspections, obtaining sound composite castings with aluminium foam cores. The presence of an external continuous layer on the foam surface and the correct placement of the foam to support injection conditions permit obtaining good quality parts. A HPDC processed magnesium-aluminium foam composite has been developed for a bicycle application obtaining a suitable combination of mechanical properties and, especially, a reduced weight in the demonstration part.

  17. Evolution of pressures and correlations in the glasma produced in high energy nuclear collisions

    Science.gov (United States)

    Ruggieri, M.; Liu, J. H.; Oliva, L.; Peng, G. X.; Greco, V.

    2018-04-01

    We consider the SU(2) glasma with Gaussian fluctuations and study its evolution by means of classical Yang-Mills equations solved numerically on a lattice. Neglecting in this first study the longitudinal expansion, we follow the evolution of the pressures of the system and compute the effect of the fluctuations in the early stage up to t ≈2 fm /c , that is the time range in which the glasma is relevant for high energy collisions. We measure the ratio of the longitudinal over the transverse pressure, PL/PT, and we find that unless the fluctuations carry a substantial amount of the energy density at the initial time, they do not change significantly the evolution of PL/PT in the early stage and that the system remains quite anisotropic. We also measure the longitudinal fields correlators both in the transverse plane and along the longitudinal direction: while at initial time fields appear to be anticorrelated in the transverse plane, this anticorrelation disappears in the very early stage, and the correlation length in the transverse plane increases. On the other hand, we find a dependence of the gauge invariant correlator on the longitudinal coordinate, which we interpret as a partial loss of correlation induced by the dynamics that we dub the gauge invariant string breaking. We finally study the effect of fluctuations on the longitudinal correlations: we find that string breaking is accelerated by the fluctuations and waiting for a sufficiently long time fluctuations lead to the complete breaking of the color strings.

  18. Supply Chain Sustainability Analysis of Indirect Liquefaction of Blended Biomass to Produce High Octane Gasoline

    Energy Technology Data Exchange (ETDEWEB)

    Cai, Hao [Argonne National Lab. (ANL), Argonne, IL (United States); Canter, Christina E. [Argonne National Lab. (ANL), Argonne, IL (United States); Dunn, Jennifer B. [Argonne National Lab. (ANL), Argonne, IL (United States); Tan, Eric [National Renewable Energy Lab. (NREL), Golden, CO (United States); Biddy, Mary [National Renewable Energy Lab. (NREL), Golden, CO (United States); Talmadge, Michael [National Renewable Energy Lab. (NREL), Golden, CO (United States); Hartley, Damon [Idaho National Lab. (INL), Idaho Falls, ID (United States); Searcy, Erin [Idaho National Lab. (INL), Idaho Falls, ID (United States); Snowden-Swan, Lesley [Pacific Northwest National Lab. (PNNL), Richland, WA (United States)

    2016-03-01

    This report describes the SCSA of the production of renewable high octane gasoline (HOG) via indirect liquefaction (IDL) of lignocellulosic biomass. This SCSA was developed for both the 2015 SOT (Hartley et al., 2015; ANL, 2016; DOE, 2016) and the 2017 design case for feedstock logistics (INL, 2014) and for both the 2015 SOT (Tan et al., 2015a) and the 2022 target case for HOG production via IDL (Tan et al., 2015b). The design includes advancements that are likely and targeted to be achieved by 2017 for the feedstock logistics and 2022 for the IDL conversion process. In the SCSA, the 2015 SOT case for the conversion process, as modeled in Tan et al. (2015b), uses the 2015 SOT feedstock blend of pulpwood, wood residue, and construction and demolition waste (C&D). Moreover, the 2022 design case for the conversion process, as described in Tan et al. (2015a), uses the 2017 design case blend of pulpwood, wood residue, switchgrass, and C&D. The performance characteristics of this blend are consistent with those of a single woody feedstock (e.g., pine or poplar). We also examined the influence of using a single feedstock type on SCSA results for the design case. These single feedstock scenarios could be viewed as bounding SCSA results given that the different components of the feedstock blend have varying energy and material demands for production and logistics.

  19. Why is solar cycle 24 an inefficient producer of high-energy particle events?

    Science.gov (United States)

    Vainio, Rami; Raukunen, Osku; Tylka, Allan J.; Dietrich, William F.; Afanasiev, Alexandr

    2017-08-01

    Aims: The aim of the study is to investigate the reason for the low productivity of high-energy SEPs in the present solar cycle. Methods: We employ scaling laws derived from diffusive shock acceleration theory and simulation studies including proton-generated upstream Alfvén waves to find out how the changes observed in the long-term average properties of the erupting and ambient coronal and/or solar wind plasma would affect the ability of shocks to accelerate particles to the highest energies. Results: Provided that self-generated turbulence dominates particle transport around coronal shocks, it is found that the most crucial factors controlling the diffusive shock acceleration process are the number density of seed particles and the plasma density of the ambient medium. Assuming that suprathermal populations provide a fraction of the particles injected to shock acceleration in the corona, we show that the lack of most energetic particle events as well as the lack of low charge-to-mass ratio ion species in the present cycle can be understood as a result of the reduction of average coronal plasma and suprathermal densities in the present cycle over the previous one.

  20. A Search for New High-Mass Phenomena Producing Top Quarks with the ATLAS Experiment

    CERN Document Server

    The ATLAS collaboration

    2011-01-01

    A search for top quark pair resonances in the lepton plus jets final states has been performed with the ATLAS experiment at the LHC. The search uses a data sample corresponding to an integrated luminosity of 33 pb$^{-1}$, and was recorded at a proton-proton centre-of-mass energy of 7 TeV. No evidence of a resonance is found. Using the reconstructed $t\\bar{t}$ mass spectrum, limits are set on the production cross-section times branching ratio to $t\\bar{t}$ for narrow $Z'$ models. The observed 95\\% C.L. limits range from approximately 55~pb to 2.2~pb for masses going from $m=$ 500 GeV to $m=$ 1000 GeV. The analysis is also used to set limits on enhanced top quark production at high $t+X$ mass, using the production of quantum black holes to model the signal. In that context, enhanced $t+X$ production with a mass threshold below 2.35 TeV is excluded.

  1. Combining gradient structure and TRIP effect to produce austenite stainless steel with high strength and ductility

    International Nuclear Information System (INIS)

    Wu, X.L.; Yang, M.X.; Yuan, F.P.; Chen, L.; Zhu, Y.T.

    2016-01-01

    We report a design strategy to combine the benefits from both gradient structure and transformation-induced plasticity (TRIP). The resultant TRIP-gradient steel takes advantage of both mechanisms, allowing strain hardening to last to a larger plastic strain. 304 stainless steel sheets were treated by surface mechanical attrition to synthesize gradient structure with a central coarse-grained layer sandwiched between two grain-size gradient layers. The gradient layer is composed of submicron-sized parallelepiped austenite domains separated by intersecting ε-martensite plates, with increasing domain size along the depth. Significant microhardness heterogeneity exists not only macroscopically between the soft coarse-grained core and the hard gradient layers, but also microscopically between the austenite domain and ε-martensite walls. During tensile testing, the gradient structure causes strain partitioning, which evolves with applied strain, and lasts to large strains. The γ → α′ martensitic transformation is triggered successively with an increase of the applied strain and flow stress. Importantly, the gradient structure prolongs the TRIP effect to large plastic strains. As a result, the gradient structure in the 304 stainless steel provides a new route towards a good combination of high strength and ductility, via the co-operation of both the dynamic strain partitioning and TRIP effect.

  2. Study on the combustion behavior of high impact polystyrene nanocomposites produced by different extrusion processes

    Directory of Open Access Journals (Sweden)

    2008-08-01

    Full Text Available The combustion behavior of a blend made of high impact polystyrene (HIPS with sodium montmorillonite (MMT-Na+ and triphenyl phosphite (TPP, as a halogen-free flame retardant, is analyzed in detail in this work. The blend is processed through various extrusion methods aimed to improve clay dispersion. The UL94 method in vertical position, oxygen index and cone calorimetric measurements assess HIPS blend behavior in combustion. TGA, FTIR, SEM and X-ray measurements, together with mechanical and rheological tests evaluate the thermal degradation, morphology, intercalation and degree of dispersion of particles. The use of a static-mixing die placed at the extreme of a single screw extruder improves clay platelets distribution and reduces the peak heat release rate better than employing a twin screw extrusion process. In addition, mechanical and rheological properties are affected substantially by changing the extrusion process. A correlation between clay dispersion and HIPS fire retardant properties is found, as the peak heat release rate decreases with good clay dispersion in cone calorimetric tests.

  3. Capillary sieving electrophoresis and micellar electrokinetic capillary chromatography produce highly correlated separation of tryptic digests

    Science.gov (United States)

    Dickerson, Jane A.; Dovichi, Norman J.

    2011-01-01

    We perform two-dimensional capillary electrophoresis on fluorescently labeled proteins and peptides. Capillary sieving electrophoresis was performed in the first dimension and micellar electrokinetic capillary chromatography was performed in the second. A cellular homogenate was labeled with the fluorogenic reagent FQ and separated using the system. This homogenate generated a pair of ridges; the first had essentially constant migration time in the CSE dimension, while the second had essentially constant migration time in the MEKC dimension. In addition a few spots were scattered through the electropherogram. The same homogenate was digested using trypsin, and then labeled and subjected to the two dimensional separation. In this case, the two ridges observed from the original two-dimensional separation disappeared, and were replaced by a set of spots that fell along the diagonal. Those spots were identified using a local-maximum algorithm and each was fit using a two-dimensional Gaussian surface by an unsupervised nonlinear least squares regression algorithm. The migration times of the tryptic digest components were highly correlated (r = 0.862). When the slowest migrating components were eliminated from the analysis, the correlation coefficient improved to r = 0.956. PMID:20564272

  4. Effects of High Hydrostatic Pressure on Expression Profiles of In Vitro Produced Vitrified Bovine Blastocysts

    Science.gov (United States)

    Jiang, Zongliang; Harrington, Patrick; Zhang, Ming; Marjani, Sadie L.; Park, Joonghoon; Kuo, Lynn; Pribenszky, Csaba; Tian, Xiuchun (Cindy)

    2016-01-01

    High hydrostatic pressure (HHP) has been used to pre-condition embryos before essential, yet potentially detrimental procedures such as cryopreservation. However, the mechanisms for HHP are poorly understood. We treated bovine blastocysts with three different HHP (40, 60 and 80 MPa) in combination with three recovery periods (0, 1 h, 2 h post HHP). Re-expansion rates were significantly higher at 40 and 60 but lower at 80 MPa after vitrification-warming in the treated groups than controls. Microarray analysis revealed 399 differentially expressed transcripts, representing 254 unique genes, among different groups. Gene ontology analysis indicated that HHP at 40 and 60 MPa promoted embryo competence through down-regulation of genes in cell death and apoptosis, and up-regulation of genes in RNA processing, cellular growth and proliferation. In contrast, 80 MPa up-regulated genes in apoptosis, and down-regulated protein folding and cell cycle-related genes. Moreover, gene expression was also influenced by the length of the recovery time after HHP. The significantly over-represented categories were apoptosis and cell death in the 1 h group, and protein folding, response to unfolded protein and cell cycle in the 2 h group compared to 0 h. Taken together, HHP promotes competence of vitrified bovine blastocysts through modest transcriptional changes. PMID:26883277

  5. High solids emulsions produced by ultrasound as a function of energy density.

    Science.gov (United States)

    Consoli, Larissa; de Figueiredo Furtado, Guilherme; da Cunha, Rosiane Lopes; Hubinger, Míriam Dupas

    2017-09-01

    The use of emulsifying methods is frequently required before spray drying food ingredients, where using high concentration of solids increases the drying process yield. In this work, we used ultrasound to obtain kinetically stable palm oil-in-water emulsions with 30g solids/100g of emulsion. Sodium caseinate, maltodextrin and dried glucose syrup were used as stabilizing agents. Sonication time of 3, 7 and 11min were evaluated at power of 72, 105 and 148W (which represents 50%, 75% and 100% of power amplitude in relation to the nominal power of the equipment). Energy density required for each assay was calculated. Emulsions were characterized for droplets mean diameter and size distribution, optical microscopy, confocal microscopy, ζ-potential, creaming index (CI) and rheological behavior. Emulsions presented bimodal size distribution, with D [3,2] ranging from 0.7 to 1.4μm and CI between 5% and 12%, being these parameters inversely proportional to sonication time and power, but with a visual kinetically stabilization after the treatment at 148W at 7min sonication. D [3,2] showed to depend of energy density as a power function. Sonication presented as an effective method to be integrated to spray drying when emulsification is needed before the drying process. Copyright © 2016 Elsevier B.V. All rights reserved.

  6. High prevalence of Cfr-producing Staphylococcus species in retail meat in Guangzhou, China.

    Science.gov (United States)

    Zeng, Zhen-Ling; Wei, Hong-Kun; Wang, Jing; Lin, Da-Chuan; Liu, Xiao-Qin; Liu, Jian-Hua

    2014-06-09

    The emergence and wide distribution of the transferable gene for linezolid resistance, cfr, in staphylococci of human and animal origins is of great concern as it poses a serious threat to the public health. In the present study, we investigated the emergence and presence of the multiresistance gene, cfr, in retail meat sourced from supermarkets and free markets of Guangzhou, China. A total of 118 pork and chicken samples, collected from Guangzhou markets, were screened by PCR for cfr. Twenty-two Staphylococcus isolates obtained from 12 pork and 10 chicken samples harbored cfr. The 22 cfr-positive staphylococci isolates, including Staphylococcus equorum (n = 8), Staphylococcus simulans (n = 7), Staphylococcus cohnii (n = 4), and Staphylococcus sciuri (n = 3), exhibited 17 major SmaI pulsed-field gel electrophoresis (PFGE) patterns. In 14 isolates, cfr was located on the plasmids. Sequence analysis revealed that the genetic structures (including ΔtnpA of Tn558, IS21-558, ΔtnpB, and tnpC of Tn558, orf138, fexA) of cfr in plasmid pHNTLD18 of a S. sciuri strain and in the plasmid pHNLKJC2 (including rep, Δpre/mob, cfr, pre/mob and partial ermC) of a S. equorum strain were identical or similar to the corresponding regions of some plasmids in staphylococcal species of animal and human origins. To the best of our knowledge, this is the first study to report the presence of the multiresistance gene, cfr, in animal meat. A high occurrence of cfr was observed in the tested retail meat samples. Thus, it is important to monitor the presence of cfr in animal foods in China.

  7. Unique spectrum of SPAST variants in Estonian HSP patients: presence of benign missense changes but lack of exonic rearrangements

    Directory of Open Access Journals (Sweden)

    Gross-Paju Katrin

    2010-03-01

    Full Text Available Abstract Background Hereditary spastic paraplegia (HSP is a clinically and genetically heterogeneous disorder that can be an autosomal-dominant, autosomal-recessive, or X-linked disease. The most common autosomal-dominant form of the disease derives from mutations in the SPAST gene. Methods The aim of this study was to analyze 49 patients diagnosed with HSP from the Estonian population for sequence variants of the SPAST gene and to describe the associated phenotypes. Healthy control individuals (n = 100 with no family history of HSP were also analyzed. All patient samples were screened using denaturing high performance liquid chromatography (DHPLC and multiplex ligation-dependent probe amplification (MLPA assay. Samples with abnormal DHPLC and MLPA profiles were sequenced, with the same regions sequenced in control samples. Results Sequence variants of SPAST were identified in 19/49 HSP patients (38.8%, twelve among them had pathogenic mutations. Within the latter group there was one sporadic case. Eight patients had pure, and four - complex HSP. The twelve variants were identified: seven pathogenic (c.1174-1G>C, c.1185delA, c.1276C>T, c.1352_1356delGAGAA, c.1378C>A, c.1518_1519insTC, c.1841_1842insA and five non-pathogenic (c.131C>T, c.484G>A, c.685A>G, c.1245+202delG, c.1245+215G>C. Only 2 of these mutations had previously been described (c.131C>T, c.1245+202delG. Three mutations, c.1174-1G>C, c.1276 C>T, c.1378C>A, showed intrafamilial segregation. Conclusion This study identified new variants of the SPAST gene which included benign missense variants and short insertions/deletions. No large rearrangements were found. Based on these data, 7 new pathogenic variants of HSP are associated with clinical phenotypes.

  8. Nanosizing of valsartan by high pressure homogenization to produce dissolution enhanced nanosuspension: pharmacokinetics and pharmacodyanamic study.

    Science.gov (United States)

    Gora, Shayana; Mustafa, Gulam; Sahni, Jasjeet Kaur; Ali, Javed; Baboota, Sanjula

    2016-01-01

    The purpose of the present study was to formulate and evaluate nanosuspension of Valsartan (VAL), a poorly water soluble and low bioavailable drug (solubility of 0.18 mg mL(-1); 23% of oral bioavailability) with the aim of improving the aqueous solubility thus the bioavailability and consequently better anti-hypertensive activity. Valsartan nanosuspension (VAL-NS) was prepared using high-pressure homogenization followed by lyophilisation. The screening of homogenization factors influencing nanosuspension was done by 3-factorial, 3-level Box-Behnken statistical design. Model suggested the influential role of homogenization pressure and cycles on drug nanosizing. The optimized formulation containing Poloxamer(-1)88 (PXM 188) was homogenized for 2 cycles at 500 and 1000 bar, followed by 5 cycles at 1500 bars. The size analysis and transmission electron microscopy showed nanometric size range and uniform shape of the nanosuspension. The in vitro dissolution showed an enhanced release of VAL from nanosuspension (VAL-NS) compared to physical mixture with PXM 188. Pharmacodynamic results showed that, oral administration of VAL-NS significantly lowered (p ≤ 0.001) blood pressure in comparison to non-homogenized VAL (VAL-Susp) in Wistar rat. The level of VAL in rat plasma treated with VAL-NS showed significant difference (p ≤ 0.005) in Cmax (1627.47 ± 112.05 ng mL(-1)), Tmax (2.00 h) and AUC0→24 (13279.2 ± 589.426 ng h mL(-1)) compared to VAL-Susp that was found to be 1384.73 ± 98.76 ng mL(-1), 3.00 h and 9416.24 ± 218.48 ng h mL(-1) respectively. The lower Tmax value, proved the enhanced dissolution rate of VAL. The overall results proved that newly developed VAL-NS increased the plasma bioavailability and pharmacodyanamic potential over the reference formulation containing crude VAL.

  9. Circadian rhythm of metabolic changes associated with summer heat stress in high-producing dairy cattle.

    Science.gov (United States)

    Shehab-El-Deen, Mohamed Ahmed M M; Fadel, Moustafa S; Van Soom, Ann; Saleh, Sherif Y; Maes, Dominiek; Leroy, Jo L M R

    2010-08-01

    The current study aimed to investigate the circadian rhythm of blood metabolic parameters associated with summer heat stress (HS) in dairy cows. Ten healthy lactating Holstein Friesian cows were followed during HS for three successive days at six different time points. Blood was sampled from each cow starting from 07:00 AM: ; at 4-h intervals. Ambient air temperature and relative humidity were recorded, and temperature-humidity index (THI) was calculated as well. Respiration rate (RR) and rectal temperature (RT) were recorded for each cow at the time of blood sampling. Concentrations of glucose, non-esterified fatty acids (NEFA), total cholesterol (TC) and urea were measured in each blood sample. The THI values were >68 at all times of the day, and the highest values were recorded at 11:00 AM: , 03:00 PM: and 07:00 PM: (80.9, 83.7, and 80.8, respectively). All the cows showed a significantly higher RR and RT coinciding with higher THI values (93 +/- 4 and 39.6 +/- 0.1; 90.2 +/- 3.4, and 40.1 +/- 0.1; 87.6 +/- 4.1, and 39.8 +/- 0.1, respectively, P < 0.05). The concentrations of glucose were the lowest at 11:00 AM: and 03:00 PM: (3.75 +/- 0.1 and 3.44 +/- 0.1 mmol/L, respectively, P < 0.05). Decreased glucose concentrations coincided with increased NEFA concentrations, (0.43 +/- 0.01 and 0.56 +/- 0.02 mmol/L, respectively, P < 0.05), and were highly negatively correlated (r = -0.50, P < 0.001). The highest urea and TC concentrations were registered at 11:00 AM: (6.11 +/- 0.15 mmol/L and 109.9 +/- 2.2 mg/dl, respectively) whereas the lowest urea and TC values were recorded at 03:00 AM: (4.97 +/- 0.18 mmol/L and 99.5 +/- 1.7 mg/dl, respectively, P < 0.05). The results of the present study indicate that there was a circadian variation in glucose, NEFA, urea, and TC resulting in the most unfavorable metabolic condition during the hottest moment of the day in dairy cattle. Earlier work revealed that HS-metabolic changes are reflected in the follicular fluid. The

  10. Laser-produced dense plasma in extremely high pressure gas and its application to a plasma-bridged gap switch

    International Nuclear Information System (INIS)

    Yamada, J.; Okuda, A.

    1989-01-01

    When an extremely high pressure gas is irradiated by an intense laser light, a dense plasma produced at the focal spot moves towards the focusing lens with a high velocity. Making use of this phenomenon, a new plasma-bridged gap switch is proposed and its switching characteristics is experimentally examined. From the experiments, it is confirmed that the switching time is almost constant with the applied voltage only when the focal spot is just on the positive electrode, indicating that the bridging of gap is caused by the laser light. (author)

  11. Formation of Highly Twisted Ribbons in a Carboxymethylcellulase Gene-Disrupted Strain of a Cellulose-Producing Bacterium

    Science.gov (United States)

    Sugano, Yasushi; Shoda, Makoto; Sakakibara, Hitoshi; Oiwa, Kazuhiro; Tuzi, Satoru; Imai, Tomoya; Sugiyama, Junji; Takeuchi, Miyuki; Yamauchi, Daisuke

    2013-01-01

    Cellulases are enzymes that normally digest cellulose; however, some are known to play essential roles in cellulose biosynthesis. Although some endogenous cellulases of plants and cellulose-producing bacteria are reportedly involved in cellulose production, their functions in cellulose production are unknown. In this study, we demonstrated that disruption of the cellulase (carboxymethylcellulase) gene causes irregular packing of de novo-synthesized fibrils in Gluconacetobacter xylinus, a cellulose-producing bacterium. Cellulose production was remarkably reduced and small amounts of particulate material were accumulated in the culture of a cmcax-disrupted G. xylinus strain (F2-2). The particulate material was shown to contain cellulose by both solid-state 13C nuclear magnetic resonance analysis and Fourier transform infrared spectroscopy analysis. Electron microscopy revealed that the cellulose fibrils produced by the F2-2 cells were highly twisted compared with those produced by control cells. This hypertwisting of the fibrils may reduce cellulose synthesis in the F2-2 strains. PMID:23243308

  12. Effect of electrode for producing the highly charged heavy ions from RIKEN 18 GHz electron cyclotron resonance ion source

    International Nuclear Information System (INIS)

    Kurita, Tetsuro; Nakagawa, Takahide; Kidera, Masanori

    1999-01-01

    We successfully produced the intense beam of highly charged Kr ions using an electrode. Under the pulsed mode operation, we found that the depth of the plasma potential dip strongly depends on the duration of the microwave and takes about 40 ms to reach the equilibrium state. Taking these results into account, we compared the beam intensities of highly charged Kr ions with and without the use of an electrode under the pulsed mode operation. We observed that the density of highly charged Kr ions and ion confinement time increase with increasing mirror magnetic field strength. The plasma potential dip becomes shallower with insertion of the electrode. Consequently, when we increase the mirror magnetic field strength and insert the electrode into the plasma, the beam intensities of highly charged ions increase. (author)

  13. Studies on the propagation of relativistic plasma waves in high density plasmas produced by hypersonic ionizing shock waves

    International Nuclear Information System (INIS)

    Williams, R.L.; Johnson, J.A. III

    1993-01-01

    The feasibility of using an ionizing shock wave to produce high density plasmas suitable for the propagation large amplitude relativistic plasma waves is being investigated. A 20 kv arc driven shock tube of coaxial geometry produces a hypersonic shock wave (10 p > 10 17 cm -3 ). The shock can be made to reflect off the end of the tube, collide with its wake, and thus increase the plasma density further. After reflecting, the plasma is at rest. The shock speed is measured using piezoelectric pressure probes and the ion density is measured using laser induced fluorescence (LIF) techniques on argon 488.0 nm and 422.8 nm lines. The future plans are to excite large amplitude relativistic plasma waves in this plasma by either injecting a short pulse laser (Laser Wake Field Scheme), two beating lasers (Plasma Beat Wave Scheme), or a short bunch of relativistic electrons (Plasma Wake Field Scheme). Results of recent computational and theoretical studies, as well as initial experimental measurements on the plasma using LIF, are reported. Implications for the application of high density plasmas produced in this way to such novel schemes as the plasma wave accelerator, photon accelerator, plasma wave undulator, and also plasma lens, are discussed. The effect of plasma turbulence is also discussed

  14. Potential of hot water extraction of birch wood to produce high-purity dissolving pulp after alkaline pulping.

    Science.gov (United States)

    Borrega, Marc; Tolonen, Lasse K; Bardot, Fanny; Testova, Lidia; Sixta, Herbert

    2013-05-01

    The potential of hot water extraction of birch wood to produce highly purified dissolving pulp in a subsequent soda-anthraquinone pulping process was evaluated. After intermediate extraction intensities, pulps with low xylan content (3-5%) and high cellulose yield were successfully produced. Increasing extraction intensity further decreased the xylan content in pulp. However, below a xylan content of 3%, the cellulose yield dramatically decreased. This is believed to be due to cleavage of glycosidic bonds in cellulose during severe hot water extractions, followed by peeling reactions during alkaline pulping. Addition of sodium borohydride as well as increased anthraquinone concentration in the pulping liquor increased the cellulose yield, but had no clear effects on pulp purity and viscosity. The low intrinsic viscosity of pulps produced after severe extraction intensities and soda-anthraquinone pulping corresponded to the viscosity at the leveling-off degree of polymerization, suggesting that nearly all amorphous cellulose had been degraded. Copyright © 2012 Elsevier Ltd. All rights reserved.

  15. [Producing know-how and making recommendations for promoting high blood pressure management in Colombia , 1998-2005].

    Science.gov (United States)

    Ortega-Bolaños, Jesús

    2008-01-01

    Producing know-how and making recommendations concerning the most effective health promotion community interventions for managing high blood pressure in Colombia. A systematic review was made of the Cochrane, Lilacs, Ovid, Proquest and Pubmed databases, the main interest of the study lying within the framework of the most effective community interventions around the world for managing high blood pressure. The following search words were used: systematic review, community intervention, cost effectiveness, health promotion and high blood pressure. Studies published in Spanish, English and Portuguese were reviewed. The research strategies used were derived from defining the most pertinent methodological approach for involving individual, interpersonal and community levels in developing the project. 1,041 articles were obtained from the systematic review of the literature: 246 abstracts, 197 articles about educational interventions for preventing and controlling high blood pressure and 53 articles adopting different approaches regarding informative interventions and communication. Only 11 complete referenced articles from this world of information fulfilled the levels of evidence and evaluation criteria necessary for producing recommendations. The available evidence concerning effective, culturally-suitable programmes and for promoting a reduction in these risk factors is limited. Greater evidence regarding community interventions is required for reducing risk factors directed towards special population groups adapted to the cultural characteristics of the participating population. This must involve determinants of the social and physical context related to social practices, these being developed on a large scale within the daily settings in which the subjects and their families are living.

  16. Gender differences in factors associated with sexual intercourse among Estonian adolescents.

    Science.gov (United States)

    Part, Kai; Rahu, Kaja; Rahu, Mati; Karro, Helle

    2011-06-01

    To examine factors associated with early sexual intercourse among 15 to 16-year-old adolescents by gender. The data were collected from a random sample of Estonian basic schools' ninth grade pupils in 1999 using self-completed questionnaires. A multivariate logistic regression analysis for boys and girls was used to test for associations between sexual intercourse, and personal gender role-related attitudes, attitudes towards sexual intercourse, pubertal timing, smoking status and experience of drunkenness. Of the respondents, 14.6% of boys and 13.1% of girls had experienced sexual intercourse. Traditional gender role-related attitudes were associated with sexual intercourse among girls, but not among boys. Smoking and experience of drunkenness was strongly associated with sexual intercourse for both genders. Gender differences in the association between gender role-related attitudes and early sexual intercourse were observed among 15 to 16-year-olds in Estonia. Smoking and experience of drunkenness were strongly related to sexual intercourse for both genders.

  17. Sexual behavior, depressive feelings, and suicidality among Estonian school children aged 13 to 15 years.

    Science.gov (United States)

    Heidmets, L; Samm, A; Sisask, M; Kõlves, K; Aasvee, K; Värnik, A

    2010-01-01

    The present paper is based on a WHO Collaborative Cross-National Study "Health Behavior in School-Aged Children (HBSC)." It aimed at describing and analyzing how the sexual behaviors of 13- to 15-year-old Estonian school children were associated with self-reported depressive feelings and suicidality. Distinctive behavioral traits in relation to age of first sexual intercourse were also investigated. Self-reported questionnaires from school children (n = 3,055) were analyzed. In total, 15.2% of school children reported being nonvirgin. Among 13-year-olds, 2.9% of girls and 6.8% of boys were nonvirgins. Approximately 25% of the 15-year-old girls and boys were nonvirgins. The likelihood of depressive feelings and suicidal ideation increased significantly in both genders with loss of virginity. Boys who had lost their virginity at 13 years or younger were 4.2 times more likely to have suicidal thoughts; comparable girls were 7.8 times more likely to have suicidal thoughts. Compared to virgins, youths who had lost their virginity reported poor self-assessed health and more risk behaviors in themselves and their peers. Experiences of sexual intercourse increased the odds ratios for depressive feelings and suicidality. The earlier sexual intercourse was initiated, the greater were the odds of lower mental well-being. Risk behaviors emerged as a complex phenomenon requiring complex prevention.

  18. High prevalence of fecal carriage of Extended Spectrum β-Lactamase/AmpC-producing Enterobacteriaceae in cats and dogs

    Directory of Open Access Journals (Sweden)

    Joost eHordijk

    2013-08-01

    Full Text Available ESBL/AmpC producing Enterobacteriaceae have been reported worldwide amongst isolates obtained from humans, food-producing animals, companion animals and environmental sources. However, data on prevalence of fecal carriage of ESBL/AmpC producing Enterobacteriaceae in healthy companion animals is limited. This pilot study describes the prevalence of ESBL/AmpC encoding genes in healthy cats and dogs, and cats and dogs with diarrhea. Twenty fecal samples of each group were cultured on MacConkey agar supplemented with 1 mg/L cefotaxime and in LB-enrichment broth supplemented with 1 mg/L cefotaxime, which was subsequently inoculated on MacConkey agar supplemented with 1 mg/L cefotaxime. ESBL/AmpC genes were identified using the Check-Points CT103 micro array kit and subsequently by sequencing analysis. Chromosomal ampC promoter mutations were detected by PCR and sequencing analysis. From the healthy and diarrheic dogs, respectively 45% and 55% were positive for E. coli with reduced susceptibility for cefotaxime. From the healthy and diarrheic cats, the estimated prevalence was respectively 0% and 25%. One diarrheic cat was positive for both reduced susceptible E. coli and P. mirabilis. The ESBL/AmpC genes found in this study were mainly blaCTX-M-1, but also blaCTX-M-14, blaCTX-M-15, blaTEM-52-StPaul, blaSHV-12 and blaCMY-2 were detected. This pilot study showed that the prevalence of ESBL/AmpC producing Enterobacteriaceae in healthy and diarrheic dogs, and diarrheic cats was relatively high. Furthermore the genes found were similar to those found in isolates of both human and food producing animal origin. However, since the size of this study was relatively small, extrapolation of the data to the general population of cats and dogs should be done with great care.

  19. Intragenotypic JFH1 based recombinant hepatitis C virus produces high levels of infectious particles but causes increased cell death

    DEFF Research Database (Denmark)

    Mateu, Guaniri; Donis, Ruben O; Wakita, Takaji

    2008-01-01

    The full-length hepatitis C virus (HCV) JFH1 genome (genotype 2a) produces moderate titers of infectious particles in cell culture but the optimal determinants required for virion production are unclear. It has been shown that intragenotypic recombinants encoding core to NS2 from J6CF...... in the context of JFH1 are more robust in the release of viral particles. To understand the contributions of structural and nonstructural genes to HCV replication potential and infectivity, we have characterized intragenotypic recombinant genotype 2a viruses with different portions of the J6 isolate engineered...... into the JFH1 infectious clone. All genomes produced high levels of intracellular HCV RNA and NS3 protein in Huh-7.5 transfected cells. However, JFH1 genomes containing J6 sequences from C to E2 (CE2) or C to p7 (Cp7) secreted up to 100-fold more infectious HCV particles than the parental JFH1 clone...

  20. Comparative study of AISI M3:2 high speed steel produced through different techniques of manufacturing

    International Nuclear Information System (INIS)

    Araujo Filho, Oscar Olimpio de

    2006-01-01

    In this work AISI M3:2 high speed steels obtained through different techniques of manufacturing, submitted to the same heat treatment procedure were evaluated by measuring their mechanical properties of transverse rupture strength and hardness. Sinter 23 obtained by hot isostatic pressing (HIP), VWM3C obtained by the conventional route and a M3:2 high speed steel obtained by cold compaction of water atomized powders and vacuum sintered with and without the addition of a small quantity of carbon were evaluated after the same heat treatment procedure. The vacuum sintered M3:2 high speed steel can be an alternative to the more expensive high speed steel produced by hot isostatic pressing and with similar properties presented by the conventional one. The characterization of the vacuum sintered M3:2 high speed steel was performed by measuring the densities of the green compacts and after the sintering cycle. The sintering produced an acceptable microstructure and densities near to the theoretical. The transverse rupture strength was evaluated by means of three point bending tests and the hardness by means of Rockwell C and Vickers tests. The technique of scanning electronic microscopy (SEM) was used to evaluate the microstructure and to establish a relation with the property of transverse rupture strength. The structure was determined by means of X-ray diffraction (XRD) patterns and the retained austenite was detected to all the conditions of heat treatment. The main contribution of this work is to establish a relation between the microstructure and the mechanical property of transverse rupture strength and to evaluate the AISI M3:2 vacuum sintered high speed steel as an alternative to the similar commercial high speed steels. (author)

  1. Seltsi muuseumist riigi keskmuuseumiks: ikka ajutiste lahendustega / Changes in the Estonian National Museum from 1909 to the present.

    Directory of Open Access Journals (Sweden)

    Krista Aru

    2011-01-01

    Full Text Available Changes in the Estonian National Museum from 1909 to the presentThe Estonian National Museum was founded in Tartu in 1909 as part of the national movement. With its activities and connections in society, the ENM helped create Estonian society, the nation’s collective memory and identity.The ENM has always been – despite the changing locations, names, and content – one of the symbols of national identity. But at the same time, ENM has never had its own building designed specially for the museum’s purposes.Since 1909 there have been several attempts to establish a home for the ENM. At first (1909–1923, Estonian society wanted to establish the museum in the center of Tartu. The museum was intended to become a key institution of the growing nation and establishing the nation’s identity.At last in 1923 the ENM secured the Raadi manor, outside the center of the city, in a beautiful park, near the lake with its boats and water attractions. In this manor the first permanent exhibition of mainly 19th century Estonian peasant life was compiled, and the ENM operated in the Raadi manor from 1923–1940 as the “Estonian’s own museum” The years of alternating occupations, World War II, and political terror damaged and destroyed the whole society. The Raadi manor was destroyed in the war too, and the ENM itself was divided into two parts – the State Ethnographic Museum and the State Literary Museum. The collections of the ENM were given to Tallinn and to many different places inside and outside Tartu. Then began “the period of temporary location” that continues today. The museum is located in several places in the city of Tartu.In 1988, the prior name of the State Ethnographic Museum – the Estonian National Museum – was reinstated. Since the 1990s there have been many attempts to secure a special building for the ENM. Now, at last, as a result of serious economic pressure, we are closer to this goal than ever. During the last five

  2. Short-lived radionuclides produced on the ORNL 86-inch cyclotron and High-Flux Isotope Reactor

    International Nuclear Information System (INIS)

    Lamb, E.

    1985-01-01

    The production of short-lived radionuclides at ORNL includes the preparation of target materials, irradiation on the 86-in. cyclotron and in the High Flux Isotope Reactor (HFIR), and chemical processing to recover and purify the product radionuclides. In some cases the target materials are highly enriched stable isotopes separated on the ORNL calutrons. High-purity 123 I has been produced on the 86-in. cyclotron by irradiating an enriched target of 123 Te in a proton beam. Research on calutron separations has led to a 123 Te product with lower concentrations of 124 Te and 126 Te and, consequently to lower concentrations of the unwanted radionuclides, 124 I and 126 I, in the 123 I product. The 86-in. cyclotron accelerates a beam of protons only but is unique in providing the highest available beam current of 1500 μA at 21 MeV. This beam current produces relatively large quantities of radionuclides such as 123 I and 67 Ga

  3. Study on a method for loading a Li compound to produce tritium using high-temperature gas-cooled reactor

    Energy Technology Data Exchange (ETDEWEB)

    Nakaya, Hiroyuki, E-mail: nakaya@nucl.kyushu-u.ac.jp [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, 744 Motooka, Fukuoka 8190395 (Japan); Matsuura, Hideaki [Department of Applied Quantum Physics and Nuclear Engineering, Kyushu University, 744 Motooka, Fukuoka 8190395 (Japan); Katayama, Kazunari [Department of Advanced Energy Engineering Science, Kyushu University, 6-1 Kasuga-koen, Kasuga 8168580 (Japan); Goto, Minoru; Nakagawa, Shigeaki [Japan Atomic Energy Agency, 4002 Oarai, Ibaraki (Japan)

    2015-10-15

    Highlights: • Tritium production by a high-temperature gas-cooled reactor was studied. • The loading method considering tritium outflow suppression was estimated. • A reactor with 600 MWt produced 400–600 g of tritium for 180 days. • A possibility that tritium outflow can be sufficiently suppressed was shown. - Abstract: Tritium production using high-temperature gas-cooled reactors and its outflow from the region loading Li compound into the helium coolant are estimated when considering the suppression of tritium outflow. A Li rod containing a cylindrical Li compound placed in an Al{sub 2}O{sub 3} cladding tube is assumed as a method for loading Li compound. A gas turbine high-temperature reactor of 300 MW electrical nominal capacity (GTHTR300) with 600 MW thermal output power is considered and modeled using the continuous-energy Monte Carlo transport code MVP-BURN, where burn-up simulations are carried out. Tritium outflow is estimated from equilibrium solution for the tritium diffusion equation in the cladding tube. A GTHTR300 can produce 400–600 g of tritium over a 180-day operation using the chosen method of loading the Li compound while minimizing tritium outflow from the cladding tube. Optimizing tritium production while suppressing tritium outflow is discussed.

  4. Dose equivalent near the bone-soft tissue interface from nuclear fragments produced by high-energy protons

    Science.gov (United States)

    Shavers, M. R.; Poston, J. W.; Cucinotta, F. A.; Wilson, J. W.

    1996-01-01

    During manned space missions, high-energy nucleons of cosmic and solar origin collide with atomic nuclei of the human body and produce a broad linear energy transfer spectrum of secondary particles, called target fragments. These nuclear fragments are often more biologically harmful than the direct ionization of the incident nucleon. That these secondary particles increase tissue absorbed dose in regions adjacent to the bone-soft tissue interface was demonstrated in a previous publication. To assess radiological risks to tissue near the bone-soft tissue interface, a computer transport model for nuclear fragments produced by high energy nucleons was used in this study to calculate integral linear energy transfer spectra and dose equivalents resulting from nuclear collisions of 1-GeV protons transversing bone and red bone marrow. In terms of dose equivalent averaged over trabecular bone marrow, target fragments emitted from interactions in both tissues are predicted to be at least as important as the direct ionization of the primary protons-twice as important, if recently recommended radiation weighting factors and "worst-case" geometry are used. The use of conventional dosimetry (absorbed dose weighted by aa linear energy transfer-dependent quality factor) as an appropriate framework for predicting risk from low fluences of high-linear energy transfer target fragments is discussed.

  5. Secondary ions produced from condensed rare gas targets under highly charged MeV/amu heavy ion bombardment

    International Nuclear Information System (INIS)

    Tawara, H.; Tonuma, T.; Kumagai, H.; Matsuo, T.

    1994-01-01

    Secondary ions produced from condensed rare gas targets are observed under MeV/amu, highly charged, heavy ion impact. The intensities of the observed cluster ions decrease smoothly as the cluster sizes become large but show some discontinuities at particular sizes of cluster ions. This seems to be closely related to the stabilities of cluster ion structures. It is also noted that very few doubly charged or practically no triply/higher charged ions have been observed, in sharp contrast to that of some condensed molecular targets. (orig.)

  6. High damping Al-Fe-Mo-Si/Zn-Al composites produced by rapidly solidified powder metallurgy process

    International Nuclear Information System (INIS)

    Li, P.Y.; Dai, S.L.; Chai, S.C.; Li, Y.R.

    2000-01-01

    The metallic materials commonly used in aircraft and aerospace fields, such as aluminum and titanium alloys, steels, etc., show extremely low damping capacity (usually of the order of or less than 10 -3 ). Thus, some problems related to vibration may emerge and influence the reliability, safety and life of airplanes, satellites, etc. It has been reported that almost two thirds of errors for rockets and satellites are related to vibration and noise. One effective way to solve these vibration-related problems is to adopt high damping metallic materials. Conventional high damping alloys exhibit damping capacity above 10 -2 , however, their densities are usually great than 5 x 10 3 kg m -3 , or their strengths are less than 200 MPa (for alloys based on dislocation damping), making them impossible to be applied to aircraft and aerospace areas. Recently, some low-density high-damping metal/metal composites based on aluminum and high damping alloys have been developed in Beijing Institute of Aeronautical Materials (BIAM) by the rapidly solidified power metallurgy process. This paper aims to report the properties of the composites based on a high temperature Al-Fe-Mo-Si alloy and a high damping Zn-Al alloy, and compare them with that of 2618-T61 alloy produced by the ingot metallurgy process

  7. Implementation of quality assurance and quality control in the Nuclear Analytical Laboratory of the Estonian Radiation Protection Centre

    International Nuclear Information System (INIS)

    Koeoep, T.; Jakobson, E.

    2002-01-01

    The Analytical Laboratory of the Estonian Radiation Protection Centre is in the process of implementing the system of Quality Assurance (QA) and Quality Control (QC) in the framework of the IAEA TC Project RER/2/004/ 'QA/QC of Nuclear Analytical Techniques'. The draft Quality Manual with annexes has been prepared accordingly to the ISO 17025 Guide, documents and other printed material delivered on the seminars of the project. The laboratory supply has been supplemented with necessary equipment for guaranteeing of quality. Proficiency testing included in the project has been performed successfully. (author)

  8. Bernhard Linde. Noor-Eesti vooriülem. Bernhard Linde. Leader of the Young Estonian Pack

    OpenAIRE

    Jaanus Kulli

    2012-01-01

    Bernhard Linde (1886–1954) was a recognized and prolific Estonian theatre critic of the first quarter of the 20th century, who mediated and propagated western as well as eastern European theatrical innovations. In addition, he was active as a literary and art critic, publisher, and proponent of libraries, to a modest extent he was a prose writer and poet. Unquestionably, however, Bernhard Linde’s most prominent role was as one of the founding members of the literary movement Young Estonia. He...

  9. Jüri Okas’ ‘specific objects’: diverging discourses in Estonian Art in the 1970s.

    OpenAIRE

    Kurg, Andres.

    2003-01-01

    Previously in the University eprints HAIRST pilot service at http://eprints.st-andrews.ac.uk/archive/00000367/ Article 3 of 6 in issue devoted to the visual culture of the Scandinavian and Baltic region. This article will look at the early works of Estonian architect and artist Jüri Okas and will try to work between diverging languages and interpretations, reading works by Okas against the background of Anglo-american conceptualism and minimalism of the same period. The first part of th...

  10. High beta capture and mirror confinement of laser produced plasmas. Semiannual report, April 1, 1977--September 30, 1977

    International Nuclear Information System (INIS)

    Haught, A.F.; Tomlinson, R.G.; Ard, W.B.

    1977-09-01

    The LITE research program is addressing two aspects of mirror confinement physics. ECRH heating of the confined LITE plasma is being investigated as a means for producing a local electrostatic well to trap cold ions within the plasma and provide DCLC stabilization without the energy drain effects obtained with a cold stabilizing stream. Concurrently, the heavy ion beam probe diagnostic being developed in LITE to experimentally measure the space potential within a minimum-B mirror plasma. During the period, 10-A beam injection focused on the target location has been achieved with the neutral beam source; investigations of hot ion building have been carried out with both a laser produced and a washer gun target; calculations modeling the ECRH stabilization have been performed, the experimental program defined, and preparations for the ECRH stabilization investigation undertaken; and the high current cesium source and high resolution electrostatic analyzer have been developed for the heavy ion beam probe. The physics of the ECRH stabilization model is studied, and conditions necessary to produce a local potential well for trapping cold ions are examined. An analysis of the stabilizing effect of this potential dip on the DCLC mode is presented. The heavy ion probe, under development for direct measurement of the mirror plasma space potential, is discussed. Using Thomson scattering measurements to calibrate the complex response of an electron cyclotron resonance microwave radiometer, measurements have been made of the time history of the electron temperature for the decaying mirror confined laser plasma target with and without streaming plasma stabilization and are reported

  11. Carbon coated Fe, Co and Ni Nanoparticles produced by high pressure CVD and their potential for medical applications

    Energy Technology Data Exchange (ETDEWEB)

    El-Gendy, A.A.; Ibrahim, E.M.M.; Khavrus, V.; Krupskaya, Y.; Leonhardt, A.; Klingeler, R.; Buechner, B. [Leibniz Institute for Solid State and Materials Research (IFW), Dresden (Germany)

    2009-07-01

    Fe rate at C, Co rate at C and Ni rate at C nanocapsules have been produced by high pressure chemical vapour deposition (HPCVD). Scanning electron microscopy images prove that most of the particles are coated with carbon. High resolution transmission electron microscopy imaging confirms that these particles have a broad size distribution and a core/shell structure. In addition, individual nanoparticles are found inside a carbon capsule as well as several particles together in one shell. X-ray diffraction confirms the phases and allows calculating the average particle size from the width of the peaks. Our magnetisation studies confirm that the coated particles are ferromagnetic up to 400 K. AC magnetic heating studies have been performed which imply the potential of carbon coated nanomagnets for applications in hyperthermia therapies.

  12. Spectral measurements of few-electron uranium ions produced and trapped in a high-energy electron beam ion trap

    International Nuclear Information System (INIS)

    Beiersdorfer, P.

    1994-01-01

    Measurements of 2s l/2 -2p 3/2 electric dipole and 2p 1/2 -2p 3/2 magnetic dipole and electric quadrupole transitions in U 82+ through U 89+ have been made with a high-resolution crystal spectrometer that recorded the line radiation from stationary ions produced and trapped in a high-energy electron beam ion trap. From the measurements we infer -39.21 ± 0.23 eV for the QED contribution to the 2s 1/2 -2p 3/2 transition energy of lithiumlike U 89+ . A comparison between our measurements and various computations illustrates the need for continued improvements in theoretical approaches for calculating the atomic structure of ions with two or more electrons in the L shell

  13. Analyses of residual iron in carbon nanotubes produced by camphor/ferrocene pyrolysis and purified by high temperature annealing

    Energy Technology Data Exchange (ETDEWEB)

    Antunes, E.F., E-mail: ericafa@las.inpe.br [Instituto Tecnologico de Aeronautica (ITA), Praca Marechal Eduardo Gomes, 50, CEP 12.228-900, Sao Jose dos Campos, SP (Brazil); Instituto Nacional de Pesquisas Espaciais (INPE), Av. dos Astronautas, 1758, CEP 12.227-010, Sao Jose dos Campos, SP (Brazil); Resende, V.G. de; Mengui, U.A. [Instituto Nacional de Pesquisas Espaciais (INPE), Av. dos Astronautas, 1758, CEP 12.227-010, Sao Jose dos Campos, SP (Brazil); Cunha, J.B.M. [Universidade Federal do Rio Grande do Sul (UFRGS), Av. Bento Goncalves, 9500, CEP 91.501-970, Porto Alegre, RS (Brazil); Corat, E.J.; Massi, M. [Instituto Nacional de Pesquisas Espaciais (INPE), Av. dos Astronautas, 1758, CEP 12.227-010, Sao Jose dos Campos, SP (Brazil)

    2011-07-01

    A detailed analysis of iron-containing phases in multiwall carbon nanotube (MWCNT) powder was carried out. The MWCNTs were produced by camphor/ferrocene and purified by high temperature annealing in an oxygen-free atmosphere (N{sub 2} or VC). Thermogravimetric analysis, Moessbauer spectroscopy, X-ray diffraction and X-ray photoelectron spectroscopy enabled the evaluation of the residual iron in MWCNTs after purification. The VC treatments provided MWCNTs with a purity degree higher than 99%. Moreover, Raman spectroscopy revealed a significant improvement in graphitic ordering after thermal annealing. A brief description of the mechanism of iron removal was included. We highlight the mobility of iron atoms through graphitic sheets and the large contact angle of iron clusters formed on MWCNT surfaces at high temperatures.

  14. High pressure liquid chromatographic assay of technetium in solutions of sodium pertechnetate produced at the AAEC Research Establishment

    International Nuclear Information System (INIS)

    Farrington, K.J.

    1985-12-01

    High pressure liquid chromatography (HPLC) is used for the assay of nanogram quantities of technetium and to determine technetium in decayed pharmaceutical products, derived from three methods of manufacture. These methods of manufacture give comparably low levels of technetium-99, at the time of collection of the solution. However, when the solutions are used to produce ready-to-inject technetium-99m, high levels of technetium-99 are present at the time of calibration, which is the day after the collection date. Where sensitive reagent kits are to be labelled, freshly collected solutions of technetium-99m should be used. The HPLC assay is a valuable technique for the quality control of technetium-based radiopharmaceuticals, and for investigation of methods of manufacture of technetium-99m. Experimental studies confirmed the findings of previous workers

  15. Microstructural characterization of low and high carbon CoCrMo alloy nanoparticles produced by mechanical milling

    Science.gov (United States)

    Simoes, T. A.; Goode, A. E.; Porter, A. E.; Ryan, M. P.; Milne, S. J.; Brown, A. P.; Brydson, R. M. D.

    2014-06-01

    CoCrMo alloys are utilised as the main material in hip prostheses. The link between this type of hip prosthesis and chronic pain remains unclear. Studies suggest that wear debris generated in-vivo may be related to post-operative complications such as inflammation. These alloys can contain different amounts of carbon, which improves the mechanical properties of the alloy. However, the formation of carbides could become sites that initiate corrosion, releasing ions and/or particles into the human body. This study analysed the mechanical milling of alloys containing both high and low carbon levels in relevant biological media, as an alternative route to generate wear debris. The results show that low carbon alloys produce significantly more nanoparticles than high carbon alloys. During the milling process, strain induces an fcc to hcp phase transformation. Evidence for cobalt and molybdenum dissolution in the presence of serum was confirmed by ICP-MS and TEM EDX techniques.

  16. Plasma conditions for non-Maxwellian electron distributions in high current discharges and laser-produced plasmas

    International Nuclear Information System (INIS)

    Whitney, K.G.; Pulsifer, P.E.

    1993-01-01

    Results from the standard quasilinear theory of ion-acoustic and Langmuir plasma microturbulence are incorporated into the kinetic theory of the electron distribution function. The theory is then applied to high current discharges and laser-produced plasmas, where either the current flow or the nonlinear laser-light absorption acts, respectively, as the energy source for the microturbulence. More specifically, the theory is applied to a selenium plasma, whose charge state is determined under conditions of collisional-radiative equilibrium, and plasma conditions are found under which microturbulence strongly influences the electron kinetics. In selenium, we show that this influence extends over a wide range of plasma conditions. For ion-acoustic turbulence, a criterion is derived, analogous to one previously obtained for laser heated plasmas, that predicts when Ohmic heating dominates over electron-electron collisions. This dominance leads to the generation of electron distributions with reduced high-energy tails relative to a Maxwellian distribution of the same temperature. Ion-acoustic turbulence lowers the current requirements needed to generate these distributions. When the laser heating criterion is rederived with ion-acoustic turbulence included in the theory, a similar reduction in the laser intensity needed to produce non-Maxwellian distributions is found. Thus we show that ion-acoustic turbulence uniformly (i.e., by the same numerical factor) reduces the electrical and heat conductivities, as well as the current (squared) and laser intensity levels needed to drive the plasma into non-Maxwellian states

  17. Assessment of selenium bioavailability from naturally produced high-selenium soy foods in selenium-deficient rats.

    Science.gov (United States)

    Yan, Lin; Reeves, Philip G; Johnson, LuAnn K

    2010-10-01

    We assessed the bioavailability of selenium (Se) from a protein isolate and tofu (bean curd) prepared from naturally produced high-Se soybeans. The Se concentrations of the soybeans, the protein isolate and tofu were 5.2±0.2, 11.4±0.1 and 7.4±0.1mg/kg, respectively. Male weanling Sprague-Dawley rats were depleted of Se by feeding them a 30% Torula yeast-based diet (4.1μg Se/kg) for 56 days, and then they were replenished with Se for an additional 50 days by feeding them the same diet containing 14, 24 or 30 μg Se/kg from the protein isolate or 13, 23 or 31 μg Se/kg from tofu, respectively. l-Selenomethionine (SeMet) was used as a reference. Selenium bioavailability was determined on the basis of the restoration of Se-dependent enzyme activities and tissue Se concentrations in Se-depleted rats, comparing those responses for the protein isolate and tofu to those for SeMet by using a slope-ratio method. Dietary supplementation with the protein isolate or tofu resulted in linear or log-linear, dose-dependent increases in glutathione peroxidase activities in blood and liver and in thioredoxin reductase activity in liver. Furthermore, supplementation with the protein isolate or tofu resulted in linear or log-linear, dose-dependent increases in the Se concentrations of plasma, liver, muscle and kidneys. These results indicated an overall bioavailability of approximately 101% for Se from the protein isolate and 94% from tofu, relative to SeMet. We conclude that Se from naturally produced high-Se soybeans is highly bioavailable in this model and that high-Se soybeans may be a good dietary source of Se. Published by Elsevier GmbH.

  18. Metabolic profiles in five high-producing Swedish dairy herds with a history of abomasal displacement and ketosis

    Directory of Open Access Journals (Sweden)

    Stengärde Lena

    2008-08-01

    Full Text Available Abstract Background Body condition score and blood profiles have been used to monitor management and herd health in dairy cows. The aim of this study was to examine BCS and extended metabolic profiles, reflecting both energy metabolism and liver status around calving in high-producing herds with a high incidence of abomasal displacement and ketosis and to evaluate if such profiles can be used at herd level to pinpoint specific herd problems. Methods Body condition score and metabolic profiles around calving in five high-producing herds with high incidences of abomasal displacement and ketosis were assessed using linear mixed models (94 cows, 326 examinations. Cows were examined and blood sampled every three weeks from four weeks ante partum (ap to nine weeks postpartum (pp. Blood parameters studied were glucose, fructosamine, non-esterified fatty acids (NEFA, insulin, β-hydroxybutyrate, aspartate aminotransferase, glutamate dehydrogenase, haptoglobin and cholesterol. Results All herds had overconditioned dry cows that lost body condition substantially the first 4–6 weeks pp. Two herds had elevated levels of NEFA ap and three herds had elevated levels pp. One herd had low levels of insulin ap and low levels of cholesterol pp. Haptoglobin was detected pp in all herds and its usefulness is discussed. Conclusion NEFA was the parameter that most closely reflected the body condition losses while these losses were not seen in glucose and fructosamine levels. Insulin and cholesterol were potentially useful in herd profiles but need further investigation. Increased glutamate dehydrogenase suggested liver cell damage in all herds.

  19. Metabolic profiles in five high-producing Swedish dairy herds with a history of abomasal displacement and ketosis

    Science.gov (United States)

    Stengärde, Lena; Tråvén, Madeleine; Emanuelson, Ulf; Holtenius, Kjell; Hultgren, Jan; Niskanen, Rauni

    2008-01-01

    Background Body condition score and blood profiles have been used to monitor management and herd health in dairy cows. The aim of this study was to examine BCS and extended metabolic profiles, reflecting both energy metabolism and liver status around calving in high-producing herds with a high incidence of abomasal displacement and ketosis and to evaluate if such profiles can be used at herd level to pinpoint specific herd problems. Methods Body condition score and metabolic profiles around calving in five high-producing herds with high incidences of abomasal displacement and ketosis were assessed using linear mixed models (94 cows, 326 examinations). Cows were examined and blood sampled every three weeks from four weeks ante partum (ap) to nine weeks postpartum (pp). Blood parameters studied were glucose, fructosamine, non-esterified fatty acids (NEFA), insulin, β-hydroxybutyrate, aspartate aminotransferase, glutamate dehydrogenase, haptoglobin and cholesterol. Results All herds had overconditioned dry cows that lost body condition substantially the first 4–6 weeks pp. Two herds had elevated levels of NEFA ap and three herds had elevated levels pp. One herd had low levels of insulin ap and low levels of cholesterol pp. Haptoglobin was detected pp in all herds and its usefulness is discussed. Conclusion NEFA was the parameter that most closely reflected the body condition losses while these losses were not seen in glucose and fructosamine levels. Insulin and cholesterol were potentially useful in herd profiles but need further investigation. Increased glutamate dehydrogenase suggested liver cell damage in all herds. PMID:18687108

  20. Combination of Successive Alkalinity Producing System (SAPS) and Aeration for Passive Treatment of Highly Acidic Mine Drainage

    Science.gov (United States)

    Oh, C.; Ji, S.

    2015-12-01

    Passive treatment system has been widely used for remediation of mine drainage since its advantage of low installation and maintenance cost. The system, however, has also a disadvantage in assuring remediation and management efficiency if the drainage is highly acidic mine drainage. To remediate acid mine drainage (AMD) especially showing high acidity, passive treatment system which consists of successive alkalinity producing system (SAPS) and subsequent aeration pond was proposed and its mechanisms and efficiency was evaluated in this research. Target AMD was obtained from Waryong coal mine and showed typical characteristics of AMD having high metal concentration and low pH (acidity > 300 mg/L as CaCO3). Four experimental cases were conducted; untreated, treated with SAPS, treated with aeration, treated with SAPS and aeration to compare role and mechanism of each unit. Between organic matter and limestone layer which constitute SAPS, the former eliminated most of Fe(III) and Al in the AMD so that the latter was kept from being clogged by precipitates. Net acidity of the AMD rapidly decreased by supplement of alkalinity at the limestone layer. A primary function of SAPS, producing alkalinity constantly without clogging, was attained due to addition a portion of limestone particle into the organic matter layer. The discharge from SAPS had low ORP and DO values because of an anaerobic environment formed at the organic matter layer although its alkalinity was increased. This water quality was unfavorable for Fe(II) to be oxidized. Installation of aeration pond after SAPS, therefore, could be effective way of enhancing oxidation rate of Fe(II). Among the experimental cases, the combination of SAPS and aeration pond was only able to remediate the AMD. This concluded that to remediate highly acidic mine drainage with passive treatment system, three critical conditions were required; pre-precipitation of Fe(III) and Al at organic matter layer in SAPS, constant alkalinity

  1. Peculiar high temperature corrosion of martensite alloy under impact of Estonian oil shale fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Tallermo, H.; Klevtsov, I. [Thermal Engineering Department of Tallinn Technical University, Tallinn (Estonia)

    1998-12-31

    The superheaters` surfaces of oil shale steam boiler made of pearlitic and austenitic alloys, are subject to intensive corrosion, mainly due to presence of chlorine in external deposits. The applicability of martensitic alloys X1OCrMoVNb91 and X20CrMoV121 for superheaters is examined here and empirical equations allowing to predict alloys` corrosion resistance in the range of operational temperatures are established. Alloy X1OCrMoVNb91 is found been most perspective for superheaters of boilers firing fossil fuel that contain alkaline metals and chlorine. The abnormal dependence of corrosion resistance of martensitic alloys on temperature is revealed, namely, corrosion at 580 deg C in presence of oil shale fly ash is more intensive than at 620 deg C. (orig.) 2 refs.

  2. Peculiar high temperature corrosion of martensite alloy under impact of Estonian oil shale fly ash

    Energy Technology Data Exchange (ETDEWEB)

    Tallermo, H; Klevtsov, I [Thermal Engineering Department of Tallinn Technical University, Tallinn (Estonia)

    1999-12-31

    The superheaters` surfaces of oil shale steam boiler made of pearlitic and austenitic alloys, are subject to intensive corrosion, mainly due to presence of chlorine in external deposits. The applicability of martensitic alloys X1OCrMoVNb91 and X20CrMoV121 for superheaters is examined here and empirical equations allowing to predict alloys` corrosion resistance in the range of operational temperatures are established. Alloy X1OCrMoVNb91 is found been most perspective for superheaters of boilers firing fossil fuel that contain alkaline metals and chlorine. The abnormal dependence of corrosion resistance of martensitic alloys on temperature is revealed, namely, corrosion at 580 deg C in presence of oil shale fly ash is more intensive than at 620 deg C. (orig.) 2 refs.

  3. The Baltic Klint beneath the central Baltic Sea and its comparison with the North Estonian Klint

    Science.gov (United States)

    Tuuling, Igor; Flodén, Tom

    2016-06-01

    Along its contact with the Baltic Shield, the margin of the East European Platform reveals a well-developed, flooded terraced relief. The most striking and consistent set of escarpments at the contact of the Lower Palaeozoic calcareous and terrigenous rocks, known as the Baltic Klint (BK), extends from northwest of Russia to the Swedish island of Öland. Marine seismic reflection profiling in 1990-2004 revealed the central Baltic Sea Klint (BSK) section in detail and enabled comparison of its geology/geomorphology with a classical klint-section onshore, namely the North Estonian Klint (NEK). The conception of the BK onshore, which is based on the land-sea separating terraced relief in northern Estonia, is not fully applicable beneath the sea. Therefore, we consider that the BSK includes the entire terraced Cambrian outcrop. We suggest the term "Baltic Klint Complex" to include the well-terraced margin of the Ordovician limestone outcrop, which is weakly developed in Estonia. Because of a steady lithological framework of the bedrock layers across the southern slope of the Fennoscandian Shield, the central BSK in the western and the NEK in the eastern part of the Baltic Homocline have largely identical morphologies. The North Estonian Ordovician limestone plateau with the calcareous crest of the BK extends across the central Baltic Sea, whereas morphological changes/variations along the Klint base occur due to the east-westerly lithostratigraphic/thickness changes in the siliciclastic Cambrian sequence. The verge of the NEK, located some 30-50 m above sea level, starts to drop in altitude as its east-westerly course turns to northeast-southwest in western Estonia. Further westwards, the BK shifts gradually into southerly deepening (0.1-0.2°) layers as its crest drops to c. 150 m below sea level (b.s.l.) near Gotska Sandön. This course change is accompanied by a considerable decrease in thickness of the platform sedimentary cover, as below the central Baltic Sea the

  4. Separation of fission produced 106Ru from simulated high level nuclear wastes for production of brachytherapy sources

    International Nuclear Information System (INIS)

    Blicharska, Magdalena; Bartoś, Barbara; Krajewski, Seweryn; Bilewicz, Aleksander

    2014-01-01

    Brachytherapy is the common method for treating various tumors, and currently 106 Ru and 125 I applicators are the most frequently used. Considering that 106 Ru is a β emitter with maximum energy of 3.54 MeV, it is best indicated in the treatment of small melanomas, with up to 20 mm tissue range. 106 Ru is commercially obtained from neutron irradiated high enrichment 235 U target in process of production 99 Mo. At present, there are only a handful of ageing reactors worldwide capable of producing the 99 Mo, therefore alternative strategies for production of this key medical isotope are explored. In our work, we propose to use liquid high-level radioactive waste as a source of high activity of 106 Ru. Simple calculations indicate that 1 dm 3 of HLLW solution after 4 years of cooling contains about 500 GBq of 106 Ru. This amount of activity is enough for production of about few thousands of brachytherapy sources. Present communication reports results of our process development studies on the recovery of ruthenium radioisotopes from simulated solution of high level radioactive waste using oxidation-extraction method

  5. Stable and solid pellets of functionalized multi-walled carbon nanotubes produced under high pressure and temperature

    Energy Technology Data Exchange (ETDEWEB)

    Santos, Pâmela Andréa Mantey dos [Universidade Federal do Rio Grande do Sul, UFRGS, Programa de Pós-Graduação em Ciência dos Materiais (Brazil); Gallas, Marcia Russman [Universidade Federal do Rio Grande do Sul, UFRGS, Instituto de Física (Brazil); Radtke, Cláudio; Benvenutti, Edilson Valmir [Universidade Federal do Rio Grande do Sul, UFRGS, Instituto de Química (Brazil); Elias, Ana Laura [The Pennsylvania State University, Department of Physics and Center for 2-D and Layered Materials (United States); Rajukumar, Lakshmy Pulickal [The Pennsylvania State University, Department of Materials Science and Engineering (United States); Terrones, Humberto [Rensselaer Polytechnic Institute, Department of Physics, Applied Physics and Astronomy (United States); Endo, Morinobu [Shinshu University, Carbon Institute of Science and Technology (Japan); Terrones, Mauricio [The Pennsylvania State University, Department of Physics and Center for 2-D and Layered Materials (United States); Costa, Tania Maria Haas, E-mail: taniaha@iq.ufrgs.br, E-mail: taniahac@gmail.com [Universidade Federal do Rio Grande do Sul, UFRGS, Programa de Pós-Graduação em Ciência dos Materiais (Brazil)

    2015-06-15

    High pressure/temperature was applied on samples of pristine multi-walled carbon nanotubes (MWCNT), functionalized nanotubes (f-MWCNT), and nanotubes doped with nitrogen (CN{sub x}MWNT). Cylindrical compact pellets of f-MWCNT with diameters of about 6 mm were obtained under pressure of 4.0 GPa at room temperature and at 400 °C, using graphite as pressure transmitting medium. The best pellet samples were produced using nitric and sulfuric acids for the functionalization of MWCNT. The effect of high pressure/temperature on CNT was investigated by several spectroscopy and characterization techniques, such as Raman spectroscopy, X-ray powder diffraction, X-ray photoelectron spectroscopy, N{sub 2} adsorption/desorption isotherms, and transmission electron microscopy. It was found that MWCNT maintain their main features in the compacted pellets, such as integrity, original morphology, and structure, demonstrating that high-pressure/temperature compaction can indeed be used to fabricate novel CNT self-supported materials. Additionally, the specific surface area and porosity are unchanged, which is important when using bulk CNT in adsorption processes. Raman analysis of the G’-band showed a shift to lower wavenumbers when f-MWCNT were processed under high pressure, suggesting that CNT are under tensile stress.

  6. Attitudes of Academic Staff towards Their Own Work and towards External Evaluation, from the Perspective of Self-Determination Theory: Estonian Case

    Science.gov (United States)

    Seema, Riin; Udam, Maiki; Mattisen, Heli

    2016-01-01

    The purpose of this study was to ascertain the attitudes of academic staff towards their own work as well as towards external evaluations. The study was based on (1) an analysis of assessment reports of institutional accreditations conducted by the Estonian Quality Agency for Higher and Vocational Education and (2) self-determination theory on…

  7. “... if there’s a party, then there’s definitely alcohol”. Construction of partying practices and abstinence in Estonian youth forums

    Directory of Open Access Journals (Sweden)

    Parder Mari-Liisa

    2015-12-01

    Full Text Available AIMS – Adolescents’ abstinence from alcohol has not been much researched in terms of providing suggestions for prevention strategies. This study aims to fill that gap by offering a practice theory-inspired analysis of how the unwritten rules of partying practices are communicated between posters of Estonian youth forums.

  8. Corporate Governance from the Perspective of Stakeholder Theory and in Light of Perceptions among Estonian Owners and Managers of Relations with Stakeholders / Mari Kooskora

    Index Scriptorium Estoniae

    Kooskora, Mari, 1969-

    2006-01-01

    Äriühingute valitsemise kontseptsioon ja teoreetiline taust; Eesti omanike ja tippjuhtide ootused suhetes erinevate huvigruppidega ning äriühingute valitsemine huvigruppide teooriast lähtudes. Skeem: The stakeholder model. Tabelid: Contractual and community stakeholders; Overview of how perceptions of the main stakeholder groups among Estonian business leaders between 1995-2004 have changed

  9. The Role of Parents and Parental Mediation on 0-3-Year Olds' Digital Play with Smart Devices: Estonian Parents' Attitudes and Practices

    Science.gov (United States)

    Nevski, Elyna; Siibak, Andra

    2016-01-01

    In this manuscript, we analyse the attitudes and practices of Estonian parents (N = 198) who allowed their 0-3-year olds to use smart devices. We aimed to discover if there was an interaction between parental use of smart technologies, parents' attitudes and the child's age that would predict young children's usage of smart devices. We also wanted…

  10. Occurrence of clinical mastitis in primiparous Estonian dairy cows in different housing conditions

    Directory of Open Access Journals (Sweden)

    Aasmäe Birgit

    2006-11-01

    Full Text Available Abstract Background Objectives of the study were to document the impact of some management factors on the occurrence of clinical mastitis in primiparous dairy cows and to identify common udder pathogens of clinical mastitis in freshly calved heifers and multiparous cows on the day of calving. Methods A one-year study was conducted during 2004 and 2005 in 11 selected Estonian dairy herds. Data consisted of 68 heifers with clinical mastitis and 995 heifers without clinical mastitis on the day of calving. Multivariable logistic regression with a random herd effect was used to investigate any association between housing system or the time interval from movement of heifers to the calving facility and day of calving on occurrence of clinical mastitis. Milk samples for bacteriological analysis were collected from affected heifers and multiparous cows on the day of calving Results Clinical mastitis occurrence in the study population of freshly calved heifers equalled 6.1 %. Housing system was not a significant risk factor for clinical mastitis of freshly calved heifers. Moving heifers to the cowbarn less than two weeks before calving in tiestall farms increased risk (OR = 5.9 p = 0.001 for clinical mastitis at parturition. The most frequently isolated udder pathogens among heifers were Escherichia coli (22.1%, Streptococcus uberis (19.1% and coagulase-negative staphylococci (8.8%. In comparison, the main pathogen in multiparous cows with clinical mastitis at parturition was Staphylococcus aureus (11.2%. Conclusion Moving heifers to the calving facilities too late in tiestall farms increased risk for clinical mastitis at parturition. The isolated udder pathogens did not differ significantly in tiestall farms compared to freestall farms in heifers, but differences were found between heifers and multiparous cows at parturition.

  11. Non-cancer morbidity among Estonian Chernobyl cleanup workers: a register-based cohort study.

    Science.gov (United States)

    Rahu, Kaja; Bromet, Evelyn J; Hakulinen, Timo; Auvinen, Anssi; Uusküla, Anneli; Rahu, Mati

    2014-05-14

    To examine non-cancer morbidity in the Estonian Chernobyl cleanup workers cohort compared with the population sample with special attention to radiation-related diseases and mental health disorders. Register-based cohort study. Estonia. An exposed cohort of 3680 men (cleanup workers) and an unexposed cohort of 7631 men (population sample) were followed from 2004 to 2012 through the Population Registry and Health Insurance Fund database. Morbidity in the exposed cohort compared with the unexposed controls was estimated in terms of rate ratio (RR) with 95% CIs using Poisson regression models. Elevated morbidity in the exposed cohort was found for diseases of the nervous system, digestive system, musculoskeletal system, ischaemic heart disease and for external causes. The most salient excess risk was observed for thyroid diseases (RR=1.69; 95% CI 1.38 to 2.07), intentional self-harm (RR=1.47; 95% CI 1.04 to 2.09) and selected alcohol-related diagnoses (RR=1.25; 95% CI 1.12 to 1.39). No increase in morbidity for stress reactions, depression, headaches or sleep disorders was detected. No obvious excess morbidity consistent with biological effects of radiation was seen in the exposed cohort, with the possible exception of benign thyroid diseases. Increased alcohol-induced morbidity may reflect alcohol abuse, and could underlie some of the higher morbidity rates. Mental disorders in the exposed cohort were probably under-reported. The future challenge will be to study mental and physical comorbidities in the Chernobyl cleanup workers cohort. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://group.bmj.com/group/rights-licensing/permissions.

  12. Personality traits and eating habits in a large sample of Estonians.

    Science.gov (United States)

    Mõttus, René; Realo, Anu; Allik, Jüri; Deary, Ian J; Esko, Tõnu; Metspalu, Andres

    2012-11-01

    Diet has health consequences, which makes knowing the psychological correlates of dietary habits important. Associations between dietary habits and personality traits were examined in a large sample of Estonians (N = 1,691) aged between 18 and 89 years. Dietary habits were measured using 11 items, which grouped into two factors reflecting (a) health aware and (b) traditional dietary patterns. The health aware diet factor was defined by eating more cereal and dairy products, fish, vegetables and fruits. The traditional diet factor was defined by eating more potatoes, meat and meat products, and bread. Personality was assessed by participants themselves and by people who knew them well. The questionnaire used was the NEO Personality Inventory-3, which measures the Five-Factor Model personality broad traits of Neuroticism, Extraversion, Openness, Agreeableness, and Conscientiousness, along with six facets for each trait. Gender, age and educational level were controlled for. Higher scores on the health aware diet factor were associated with lower Neuroticism, and higher Extraversion, Openness and Conscientiousness (effect sizes were modest: r = .11 to 0.17 in self-ratings, and r = .08 to 0.11 in informant-ratings, ps < 0.01 or lower). Higher scores on the traditional diet factor were related to lower levels of Openness (r = -0.14 and -0.13, p < .001, self- and informant-ratings, respectively). Endorsement of healthy and avoidance of traditional dietary items are associated with people's personality trait levels, especially higher Openness. The results may inform dietary interventions with respect to possible barriers to diet change.

  13. Anti-Inflammatory and Antioxidant Properties of Casein Hydrolysate Produced Using High Hydrostatic Pressure Combined with Proteolytic Enzymes.

    Science.gov (United States)

    Bamdad, Fatemeh; Shin, Seulki Hazel; Suh, Joo-Won; Nimalaratne, Chamila; Sunwoo, Hoon

    2017-04-10

    Casein-derived peptides are shown to possess radical scavenging and metal chelating properties. The objective of this study was to evaluate novel anti-inflammatory properties of casein hydrolysates (CH) produced by an eco-friendly process that combines high hydrostatic pressure with enzymatic hydrolysis (HHP-EH). Casein was hydrolysed by different proteases, including flavourzyme (Fla), savinase (Sav), thermolysin (Ther), trypsin (Try), and elastase (Ela) at 0.1, 50, 100, and 200 MPa pressure levels under various enzyme-to-substrate ratios and incubation times. Casein hydrolysates were evaluated for the degree of hydrolysis (DH), molecular weight distribution patterns, and anti-inflammatory properties in chemical and cellular models. Hydrolysates produced using HHP-EH exhibited higher DH values and proportions of smaller peptides compared to atmospheric pressure-enzymatic hydrolysis (AP-EH). Among five enzymes, Fla-digested HHP-EH-CH (HHP-Fla-CH) showed significantly higher antioxidant properties than AP-Fla-CH. The anti-inflammatory properties of HHP-Fla-CH were also observed by significantly reduced nitric oxide and by the suppression of the synthesis of pro-inflammatory cytokines in lipopolysaccharide (LPS)-stimulated RAW 264.7 macrophage cells. Liquid chromatography with tandem mass spectrometry (LC-MS/MS) revealed that 59% of the amino acids of the peptides in HHP-Fla-CH were composed of proline, valine, and leucine, indicating the potential anti-inflammatory properties. In conclusion, the HHP-EH method provides a promising technology to produce bioactive peptides from casein in an eco-friendly process.

  14. Omaeluloolisus eesti teatris: Merle Karusoo lavastustest. Life Narratives and Estonian Theatre: The Productions of Merle Karusoo

    Directory of Open Access Journals (Sweden)

    Piret Kruuspere

    2012-04-01

    Full Text Available Any consideration of Estonian theatre from the point of view of biographical theatre needs to include the work of playwright and director Merle Karusoo. Productions based on various life narratives (diaries, letters, biographical interviews form the core of her work that can be defined as biographical or memory theatre. Her work has also been viewed within the context of community theatre or political theatre; Karusoo has herself referred to her work as sociological theatre. Life narratives have functioned in Karusoo’s productions as the basis for restoring oppressed or denied collective discourses of memory. Her productions emerged within the framework of the more general process of restoration of historical heritage and the rehabilitation of collective memory at the end of the 1980s and the beginning of the 1990s. Life story can be viewed as the essence of Merle Karusoo’s theatre. The personal in the life story in the production activates the emotional memory of the audience; for older generations such theatre facilitates a legitimisation of remembering one’s life story in entirety, and for younger generations it functions as a vehicle of collective, historical and national memory. The current article outlines the main stages of Karusoo’s biographical theatre, highlights major productions of each stage and provides an overview of their reception. Karusoo’s theatre dates back to 1980s. Productions based on life stories of the generations born in 1950s and 1960s, Meie elulood (Our Biographies and Kui ruumid on täis ... (Full Rooms both in 1982, mediated fragments of life stories of 16 drama students, focusing on the processes of self-conception and -reflection of young persons. In the context of the Soviet regime that exerted firm ideological control over the private lives of its citizens, Karusoo’s productions struck an especially powerful and unusual chord. Karusoo’s biographical theatre has gathered momentum and assumed a more

  15. Euroopa-ihalusest taasiseseisvusperioodi autobiograafiates / European Identifications in Post-Soviet Estonian Life Writing

    Directory of Open Access Journals (Sweden)

    Leena Kurvet-Käosaar

    2016-12-01

    Full Text Available Teesid: Artikkel käsitleb Euroopat kui identiteedi ja minaduse sõlmpunkti ja enesevahenduse mõõdet kolmes omaelulookirjutuslikus teoses, mille autoritel on väljapaistev positsioon eesti (kirjanduskultuuris: Jaan Krossi „Kallid kaasteelised“ (2003a, 2008, Jaan Kaplinski „Isale“ (2003 ja Tõnu Õnnepalu „Flandria päevik“ (2007. Artikkel keskendub sellele, kuidas küsimused suhestumise trajektooridest Euroopa mäluruumiga haakuvad Krossi, Kaplinski ja Õnnepalu teostes esiletuleva enesemääratlusliku raamiga, neist lähtuvate vastastikuse kõnetuse võimaluste ja oma aegruumi tunnetuse pidepunktidega. Kuigi tegemist on eesti keeles ilmunud ning eesti kultuuriruumi lugejale suunatud teostega, seostuvad neis väljajoonistuvad enesemääratluse teljed viimastel aastakümnetel hoogustunud laiemate aruteludega ühtse Euroopa mäluraami ning identiteedi võimalikkusest ja selle toimimise tingimustest.   In recent years, the question of the possibility of a shared frame of memory and identity in Europe, its desired manifestations and practices for attaining it as well as its obstacles and limitations to it have gained prominence in scholarly debates in a number of disciplines. In terms of the division between the East and West of Europe, these discussions take as their starting point the collapse of the Soviet system in 1989 as well as the European Union enlargement in 2004. Far from uniform, the exceedingly complex and contrasting ranges of arguments have put forward a varied palette of perspectives and suggestions about possible and desirable implications of Europe in different socio-political and cultural configurations. Taking these debates as my starting point, the current article offers an analysis of three life writing works by contemporary Estonian authors and intellectuals, Kallid kaasteelised (Dear Fellow Travellers, 2003, 2008 by Jaan Kross, Isale (To My Father, 2003 by Jaan Kaplinski and Flandria päevik (The Flemish Diary

  16. High rates of multidrug resistance among uropathogenic Escherichia coli in children and analyses of ESBL producers from Nepal

    Directory of Open Access Journals (Sweden)

    Narayan Prasad Parajuli

    2017-01-01

    Full Text Available Abstract Background Emergence of Extended-spectrum beta-lactamase producing Escherichia coli causing urinary tract infections (UTI among pediatric patients is an increasing problem worldwide. However, very little is known about pediatric urinary tract infections and antimicrobial resistance trend from Nepal. This study was conducted to assess the current antibiotic resistance rate and ESBL production among uropathogenic Escherichia coli in pediatric patients of a tertiary care teaching hospital of Nepal. Methods A total of 5,484 urinary tract specimens from children suspected with UTI attending a teaching hospital of Nepal over a period of one year were processed for the isolation of bacterial pathogens and their antimicrobial susceptibility testing. Escherichia coli (n = 739, the predominant isolate in pediatric UTI, was further selected for the detection of ESBL-production by phenotypic combination disk diffusion test. Results Incidence of urinary tract infection among pediatric patients was found to be 19.68% and E coli (68.4% was leading pathogen involved. Out of 739 E coli isolates, 64.9% were multidrug resistant (MDR and 5% were extensively drug resistant (XDR. Extended spectrum beta lactamase (ESBL was detected in 288 (38.9% of the E coli isolates. Conclusion Alarming rate of drug resistance among pediatric uropathogens and high rate of ESBL-producing E. coli was observed. It is extremely necessary to routinely investigate the drug resistance among all isolates and formulate strict antibiotics prescription policy in our country.

  17. Pathway-based factor analysis of gene expression data produces highly heritable phenotypes that associate with age.

    Science.gov (United States)

    Anand Brown, Andrew; Ding, Zhihao; Viñuela, Ana; Glass, Dan; Parts, Leopold; Spector, Tim; Winn, John; Durbin, Richard

    2015-03-09

    Statistical factor analysis methods have previously been used to remove noise components from high-dimensional data prior to genetic association mapping and, in a guided fashion, to summarize biologically relevant sources of variation. Here, we show how the derived factors summarizing pathway expression can be used to analyze the relationships between expression, heritability, and aging. We used skin gene expression data from 647 twins from the MuTHER Consortium and applied factor analysis to concisely summarize patterns of gene expression to remove broad confounding influences and to produce concise pathway-level phenotypes. We derived 930 "pathway phenotypes" that summarized patterns of variation across 186 KEGG pathways (five phenotypes per pathway). We identified 69 significant associations of age with phenotype from 57 distinct KEGG pathways at a stringent Bonferroni threshold ([Formula: see text]). These phenotypes are more heritable ([Formula: see text]) than gene expression levels. On average, expression levels of 16% of genes within these pathways are associated with age. Several significant pathways relate to metabolizing sugars and fatty acids; others relate to insulin signaling. We have demonstrated that factor analysis methods combined with biological knowledge can produce more reliable phenotypes with less stochastic noise than the individual gene expression levels, which increases our power to discover biologically relevant associations. These phenotypes could also be applied to discover associations with other environmental factors. Copyright © 2015 Brown et al.

  18. High-quality laser-produced proton beam realized by the application of a synchronous RF electric field

    International Nuclear Information System (INIS)

    Nakamura, Shu; Ikegami, Masahiro; Iwashita, Yoshihisa; Shirai, Toshiyuki; Tongu, Hiromu; Souda, Hikaru; Noda, Akira; Daido, Hiroyuki; Mori, Michiaki; Kado, Masataka; Sagisaka, Akito; Ogura, Koichi; Nishiuchi, Mamiko; Orimo, Satoshi; Hayashi, Yukio; Yogo, Akifumi; Pirozhkov, Alexander S.; Bulanov, Sergei V.; Esirkepov, Timur; Nagashima, Akira; Kimura, Toyoaki; Tajima, Toshiki; Takeuchi, Takeshi; Fukumi, Atsushi; Li, Zhong

    2007-01-01

    A short-pulse (∼210fs) high-power (∼1 TW) laser was focused on a tape target 3 and 5 μm in thickness to a size of 11 x 15 μm 2 with an intensity of 3 x 10 17 W/cm 2 . Protons produced by this laser with an energy spread of 100% were found to be improved to create peaks in the energy distribution with a spread of ∼7% by the application of the RF electric field with an amplitude of ±40kV synchronous to the pulsed laser. This scheme combines the conventional RF acceleration technique with laser-produced protons for the first time. It is possible to be operated up to 10 Hz, and is found to have good reproducibility for every laser shot with the capability of adjusting the peak positions by control of the relative phase between the pulsed laser and the RF electric field. (author)

  19. Unresolved transition array based water window soft x-ray source by laser-produced high-Z plasma

    International Nuclear Information System (INIS)

    Higashiguchi, Takeshi; Dunne, Padraig; O'Sullivan, Gerry

    2013-01-01

    We demonstrate a table-top broadband emission water window source based on laser-produced high-Z plasmas. resonance emission from multiply charged ions merges to produce intense unresolved transition arrays (UTAs) in the 2 to 4 nm region, extending below the carbon K edge (4.37 nm). Arrays resulting from n=4-n=4 transitions are overlaid with n=4-n=5 emission and shift to shorter wavelength with increasing atomic number. An outline of a microscope design for single-shot live cell imaging is proposed based on a bismuth plasma UTA source, coupled to multilayer mirror optics. At power densities available from 'table-top' solid-state lasers, comparison of emission from a number of targets has shown that 3d-4f UTA in zirconium plasmas have highest overall brightness and in an imaging system based on reflective multilayer mirrors, may, depending on bandwidth, have superior performance than either line or broader-band sources. (author)

  20. Isamaalaulud ja okupatsioonirežiim – nostalgia, utoopia ja reaalsus. Estonian Patriotic Songs and the Occupational Regime – Nostalgia, Utopia and Reality

    Directory of Open Access Journals (Sweden)

    Kanni Labi

    2012-04-01

    Full Text Available Estonian knowledge of history emanates from the fact that constituting an independent nation has for the most part been nothing but a utopia, and was a reality for a relatively short time. When it comes to selfidentification though, the expression ’a singing people’ is often used by the Estonians to describe themselves. Nostalgia for freedom is reflected in the Estonian culture of almost all periods and is carried on by the singing tradition, where patriotic songs emerge independent of different musical tastes within a particular generation and form an important part of a common Estonian repertoire. Patriotic songs occupy a central place in several fields of Estonian culture: besides music culture also in popular culture,and literary history – the works of poetry which have gained the most popularity are those which when put to music have been the most widely spread among the people. The main part of the most popular Estonian patriotic songs are choral songs from the national awakening at the end of the 19th century. Despite the national programmes aiming to wipe out ‘bourgeois nationalism’, they were sung at the song festivals in the Soviet era and were published in song books, expressing the people’s nostalgia for freedom lost. After the end of the Second World War, there was an attempt at launching a kind of patriotic new creation, where patriotism was merged with Soviet pathos; the aim was to show that the people’s utopia was in fact communism, but not a single one of those songs made it into the people’s common repertoire. Only the patriotic songs composed in the 1980s during the so-called new national awakening reached a popularity comparable to that of the old songs. The discourse on ’Estonianness’ and the shaping of a matching repertoire under imperial Russian rule took place under very different circumstances than its preservation and development in the second half of the 20th century under Soviet occupation, but