WorldWideScience

Sample records for high precision 14c

  1. Correlating the Ancient Maya and Modern European Calendars with High-Precision AMS 14C Dating

    Science.gov (United States)

    Kennett, Douglas J.; Hajdas, Irka; Culleton, Brendan J.; Belmecheri, Soumaya; Martin, Simon; Neff, Hector; Awe, Jaime; Graham, Heather V.; Freeman, Katherine H.; Newsom, Lee; Lentz, David L.; Anselmetti, Flavio S.; Robinson, Mark; Marwan, Norbert; Southon, John; Hodell, David A.; Haug, Gerald H.

    2013-04-01

    The reasons for the development and collapse of Maya civilization remain controversial and historical events carved on stone monuments throughout this region provide a remarkable source of data about the rise and fall of these complex polities. Use of these records depends on correlating the Maya and European calendars so that they can be compared with climate and environmental datasets. Correlation constants can vary up to 1000 years and remain controversial. We report a series of high-resolution AMS 14C dates on a wooden lintel collected from the Classic Period city of Tikal bearing Maya calendar dates. The radiocarbon dates were calibrated using a Bayesian statistical model and indicate that the dates were carved on the lintel between AD 658-696. This strongly supports the Goodman-Martínez-Thompson (GMT) correlation and the hypothesis that climate change played an important role in the development and demise of this complex civilization.

  2. The development of high precision 14C measurement and its application to archaeological time-scale problems

    International Nuclear Information System (INIS)

    Pearson, G.W.

    1983-01-01

    High precision calibration curve of some 6000 years has been constructed from the measurement of contiguous 20 year samples of dendrochronologically dated Irish oak. 14 C evidence was presented using a 'wiggle' matching technique which supported the dendrochronological fixing of the BC period Irish oak chronology. Two archaeological samples were 'wiggle matched' to give a calendar age within a range of 25 years and proved that this technique is as precise as dendrochronological dating and is potentially as useful for a much wider range of samples and growth periods. (author)

  3. Reassessment of the C-13/C-12 and C-14/C-12 isotopic fractionation ratio and its impact on high-precision radiocarbon dating

    NARCIS (Netherlands)

    Fahrni, Simon M.; Southon, John R.; Santos, Guaciara M.; Palstra, Sanne W. L.; Meijer, Harro A. J.; Xu, Xiaomei

    2017-01-01

    The vast majority of radiocarbon measurement results (C-14/C-12 isotopic ratios or sample activities) are corrected for isotopic fractionation processes (measured as C-13/C-12 isotopic ratios) that occur in nature, in sample preparation and measurement. In 1954 Harmon Craig suggested a value of 2.0

  4. Improved precision radiocarbon measurements and natural 14C variations around 10.000 cal BP

    International Nuclear Information System (INIS)

    Goslar, T.

    1990-01-01

    The subject of present work, natural radiocarbon variations in the past, is one of the most significant methodological questions of radiocarbon chronology. In the first three chapters, the author discusses problems connected with calibration of conventional radiocarbon dates, and consequences of monitoring the 14 C variations for the research of the changes of geomagnetic field, solar activity and global carbon cycle. Dendrochronological dating, which, in connection with 14 C measurements enables us to reconstruct the radiocarbon variations in the past, is also widely described. Fourth chapter concerns the technical problems of detection 14 C β-activity, especially accounting for proportional counters technique. In the next chapter the author describes results of his own dendrochonological research. Sixth chapter comprises frame discussion of the system for improved precision radiocarbon dating, together with short presentation of equipment, its calibration and analysis of errors. The last chapter gives the reconstruction of the pattern of atmospheric 14 C variations in 300-year period around 10.000 cal BP. It was found that in the last 10.000 years similar pattern repeats periodically. In the end, the author discusses the meaning of negative correlation between 14 C variations and changes of annual tree-ring widths in the oak trunk from Lublinek, for searching the connection between solar activity and climate. (author)

  5. A high resolution method for {sup 14}C analysis of a coral from South China Sea: Implication for “AD 775” {sup 14}C event

    Energy Technology Data Exchange (ETDEWEB)

    Ding, Ping [State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); Shen, Chengde, E-mail: cdshen@gig.ac.cn [State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 Beijing (China); Yi, Weixi; Wang, Ning [State Key Laboratory of Isotope Geochemistry, Guangzhou Institute of Geochemistry, Chinese Academy of Sciences, 510640 Guangzhou (China); Ding, Xingfang; Liu, Kexin; Fu, Dongpo [State Key Laboratory of Nuclear Physics and Technology, Peking University, 100871 Beijing (China); Liu, Weiguo [State Key Laboratory of Loess and Quaternary Geology, Institute of Earth Environment, The Chinese Academy of Sciences, 710075 Xi’an (China); Liu, Yi [CAS Key Laboratory of Crust-Mantle Materials and Environments, School of Earth and Space Sciences, University of Science and Technology of China, 230026 Hefei (China)

    2015-10-15

    A pre-heating method that improves the background and precision of {sup 14}C dating significantly was applied for fossil coral dating with high resolution in our lab in Guangzhou Institute of Geochemistry, Chinese Academy of Sciences (GIGCAS). The reaction tube is heated under 300 °C in a vacuum line before it is used for graphitization. The method can reduce the contamination absorbed in TiH{sub 2}, Zn and Fe power placed in the graphitization tube. With the pre-heating and average drilling method, bi-weekly resolution {sup 14}C dating in a fossil coral is carried out to investigate the “AD 775 {sup 14}C spike event”. Different from the tree ring {sup 14}C archives with the {sup 14}C spike of ∼15‰ (Δ{sup 14}C), the {sup 14}C spike in the coral shows an abrupt peak of 45‰ and two smaller spikes of Δ{sup 14}C > 20‰ in half a year in AD 776. And then, the {sup 14}C content in coral decreases gradually in AD 777. The peak time of the {sup 14}C spike event likely occurs in the summer of AD 776 according to the δ{sup 18}O variation in coral. High-resolution dating of {sup 14}C in coral provides not only a more detail process of the event than that from tree rings, but also the first report of the event from sea ecosystem. Both of them suggest an extraterrestrial origin of the event cause.

  6. Analysis of 14C and 13C in teeth provides precise birth dating and clues to geographical origin.

    Science.gov (United States)

    Alkass, K; Buchholz, B A; Druid, H; Spalding, K L

    2011-06-15

    The identification of human bodies in situations when there are no clues as to the person's identity from circumstantial data, poses a difficult problem to the investigators. The determination of age and sex of the body can be crucial in order to limit the search to individuals that are a possible match. We analyzed the proportion of bomb pulse derived carbon-14 ((14)C) incorporated in the enamel of teeth from individuals from different geographical locations. The 'bomb pulse' refers to a significant increase in (14)C levels in the atmosphere caused by above ground test detonations of nuclear weapons during the cold war (1955-1963). By comparing (14)C levels in enamel with (14)C atmospheric levels systematically recorded over time, high precision birth dating of modern biological material is possible. Above ground nuclear bomb testing was largely restricted to a couple of locations in the northern hemisphere, producing differences in atmospheric (14)C levels at various geographical regions, particularly in the early phase. Therefore, we examined the precision of (14)C birth dating of enamel as a function of time of formation and geographical location. We also investigated the use of the stable isotope (13)C as an indicator of geographical origin of an individual. Dental enamel was isolated from 95 teeth extracted from 84 individuals to study the precision of the (14)C method along the bomb spike. For teeth formed before 1955 (N=17), all but one tooth showed negative Δ(14)C values. Analysis of enamel from teeth formed during the rising part of the bomb-spike (1955-1963, N=12) and after the peak (>1963, N=66) resulted in an average absolute date of birth estimation error of 1.9±1.4 and 1.3±1.0 years, respectively. Geographical location of an individual had no adverse effect on the precision of year of birth estimation using radiocarbon dating. In 46 teeth, measurement of (13)C was also performed. Scandinavian teeth showed a substantially greater depression in

  7. Precise Study of Fine Structure in $^{14}$C Emission from $^{223}$Ra

    CERN Multimedia

    2002-01-01

    We request 10 shifts in two sessions of beam time at ISOLDE for the production of a $^{223}$Ra source. This source will be used with the superconducting spectrometer SOLENO at Orsay for a precise measurement (good statistics and energy resolution) of the fine stucture in the energy spectrum of $^{14}$C nuclei emitted by $^{223}$Ra, discovered at Orsay in July 1989. The measurement will be devoted to carry out the hindrance factors of the transitions to 15$\\!^-\\!$/2$\\,$ (1.423 MeV) and 5$\\!^+\\!$/2$\\,$ (1.567 MeV) excited states of $^{209}$Pb, which present a particular interest for obtaining spectroscopic information and testing nuclear models.

  8. Synthesis of glycolic acid-1-14C of high specific activity

    International Nuclear Information System (INIS)

    Ramamurthy, T.V.; Viswanathan, K.V.

    1987-01-01

    A simple procedure is described which efficiently converts traces of 14 C labelled cyanide present as a dilute solution into glycolic acid-1- 14 C with more than 85% radiochemical recovery and of high specific activity. (author)

  9. Synthesis of [diene-"1"4C] curcumin at high specific activity

    International Nuclear Information System (INIS)

    Filer, Crist N.; Lacy, James M.; Wright, Christopher

    2016-01-01

    An efficient method is described to label curcumin with "1"4C at high specific activity. - Highlights: • This paper describes the synthesis of ["1"4C] Curcumin at the highest specific activity and total activity amount yet reported. • The "1"4C label was installed in the diene framework of Curcumin. • This paper also describes the characterization of ["1"4C] Curcumin by HPLC and mass spectrometry.

  10. Set-up of proportional counter L2 for 14C measurements with improved precision

    International Nuclear Information System (INIS)

    Goslar, T.; Pazdur, A.; Pazdur, M.F.; Walanus, A.; Zastawny, A.

    1990-01-01

    Radiocarbon dating with improved precision denotes determination of conventional radiocarbon dates with accuracy equal to ca ± 25 yr. The paper presents some fundamental data concerning construction and design of the proportional counter L2, the results of calibration of the counter, including detailed information on changes of the background counting rate. The counter L2 enables dating of samples up to 50 000 yr. For samples younger than 3000 yr the error of dating is equal to ca ± 25 yr. 4 figs., 1 tab., 9 refs. (author)

  11. High resolution 14C dating of surface peat using the AMS technique

    International Nuclear Information System (INIS)

    Tolonen, K.; Possnert, G.; Jungner, H.; Sonninen, E.; Alm, J.

    1992-01-01

    In an AMS (Accelerator Mass Spectrometric) determination of 14 C from moss-increment dated samples from a Sphagnum fuscum hummock, a clear peak representing the time of high 14 C activity in the atmosphere due to nuclear bomb tests was found. The C-14 activities in the peat profile at deeper levels, corresponding to the period down to 1600 Bp, showed similar variations as the atmospheric values. The time scale obtained from radiocarbon dating fitted well with results from moss-increment counting, pollen analysis and dendrochronological dating of a fire horizon. Using the bomb layers and refixing into growing peat was estimated. The fraction of soil carbon dioxide taken up by the contemporary Sphagnum Sward was thus found to be in the order of 20 %. (orig.). (15 refs., 5 figs., 2 tabs.)

  12. Characteristics of high-purity Teflon vial for 14C measurement in old tree rings

    International Nuclear Information System (INIS)

    Sakurai, H.; Saswaki, Y.; Matsumoto, T.; Aoki, T.; Kato, W.; Gandou, T.; Gunji, S.; Tokanai, F.

    2003-01-01

    14 C concentration in single-year tree rings of an old cedar of ca. 2500 years ago is measured to investigate the 11-yr periodicity of solar activity. Our highly accurate 14 C measuring system is composed of a benzene synthesizer capable of producing a large quantity (10 g) of benzene and a Quantulus 1220 TM liquid scintillation counting system. The accuracy is less than 0.2% for measurements of 14 C concentration. The benzene sample is contained in a high-purity Teflon/copper-counting vial (20 ml) manufactured by Wallac Oy Company. We found a vial with an irregular copper cap for the measurements of 11 tree rings. The behavior of the vial with the irregular cap was investigated. The Teflon sheet inside the cap plays an important role in achieving stable measurement. The rate of volatilization of the benzene was less than 0.35 mg/day for vials with ordinary caps. This results in the volatilization rate of 0.003% for 10.5 g of benzene and hence guarantees measurement at an accuracy of 0.2% for 70 days

  13. Analysis of 14C and 13C in teeth provides precise birth dating and clues to geographical origin

    OpenAIRE

    K, Alkass; BA, Buchholz; H, Druid; KL, Spalding

    2011-01-01

    The identification of human bodies in situations when there are no clues as to the person’s identity from circumstantial data, poses a difficult problem to investigators. The determination of age and sex of the body can be crucial in order to limit the search to individuals that are a possible match. We analyzed the proportion of bomb pulse derived carbon-14 (14C) incorporated in the enamel of teeth from individuals from different geographical locations. The ‘bomb pulse’ refers to a significa...

  14. High sensitivity spectroscopy with tunable diode lasers - detection of O2 quadrupole transitions and 14C

    International Nuclear Information System (INIS)

    Reid, J.

    1981-01-01

    In recent years, tunable lead-salt diode lasers (TDLs) have found widespread application in all fields of infrared spectroscopy. However, most applications of TDLs utilise only the tunability and high resolution of these devices, and few experiments have employed the ability of the TDL to detect very small absorption coefficients. We have developed a laser absorption spectrometer (LAS) which can detect absorption coefficients as small as 10 -6 to 10 -7 m -1 , while retaining the full tunability and resolution of the TDL. This instrument has been used as a point monitoring system for many trace gases of atmospheric significance. In this paper, we describe two additional applications of the LAS: (I) the detection of very weak transitions such as quadrupole lines in oxygen, and (II) the detection of rare isotopes, with 14 C in CO 2 as an example. Details are given in the following sections. (orig.)

  15. Detection of 14C-Carmoisine metabolites by high performance liquid chromatography

    International Nuclear Information System (INIS)

    Marinovich, M.; Ferrari, A.; Pacini, N.; Galli, C.L.

    1983-01-01

    14 C-Carmoisine, a sulphonated azodye, 200 mg/kg b.w. (25 μCi), was administered to rats by gavage. Separation of radioactive compounds in faeces and urine of these animals was carried out by HPLC with a UV and a radioactivity detector. In addition to unmodified carmoisine, five radioactive compounds were present. The main peak showed both the retention time and the UV spectrum of naphtionic acid. Metabolic patterns similar to those observed ''in vivo'' were found by incubation of 14 C-carmoisine under anaerobic conditions with a bacterial suspension isolated from human faeces and from the intestinal contents of rats. This procedure permits the preparation of amounts of unknown metabolites suitable for their identification. (orig.)

  16. L-tryptophan synthesis from 14C-anthranilic acid in plants with high and low tryptophan content

    International Nuclear Information System (INIS)

    Kutacek, M.; Eder, J.; Vackova, K.; Prochazka, S.

    1978-01-01

    The biosynthesis of L-tryptophan (L-trp) from anthranilic acid- 14 C (AA- 14 C) in undamaged organs of the seedlings of kohlrabi and peas, with high L-trp content and maize plants, with low L-trp content was compared. As for maize the experiments were carried out with normal and opaque-2 phenotypes, both with the seedlings and with the ripening kernels. AA- 14 C is metabolized in the plants to L-trp pool and to glycosyl esters of AA. In maize seedlings L-trp- 14 C is synthesized relatively less than in kohlrabi and in pea. The de novo formation of L-trp- 14 C is stopped earlier in maize than in kohlrabi. The level of free L-trp- 14 C is relatively low in maize in comparison with kohlrabi and peas. In spite of this the formation of L-trp- 14 C from AA- 14 C is sufficient in maize to incorporate L-trp both into the proteins and into a secondary metabolite that is not yet defined. At the period of seedlings the incorporation in maize of L-trp into the proteins is comparable with that in kohlrabi, and it is maximum in pea. Maize, at the stage of germination, thus forms proteins rich in L-trp. The formation of free L-trp is approximately ten times lower in ripening kernels and in the leaves adjacent to the ear and it further decreases in the course of the ripening of the kernels. Although the activity of the biosynthesis of the AA- 14 C→L-trp- 14 C pathway is relatively lower in maize than in kohlrabi and peas, this pathway is most responsible for the differences in the content of L-trp in these plants. Neither amitrol nor histidine affected the biosynthesis of L-trp in kohlrabi; the interaction of the biosynthetic pathways of L-trp and histidine known in microorganisms is thus not important in a higher plant. (author)

  17. High temperature vacuum furnace for the preparation of graphite targets for 14C dating by tandem accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Lowe, D.C.; Bristow, P.; Judd, W.J.

    1985-02-01

    A simple and reliable furnace design capable of producing temperatures of up to 2800 deg. C is presented. The furnace has been specifically designed for the rapid and reliable production of graphite targets for 14 C dating purposes but may be used in a variety of applications requiring high temperatures under vacuum conditions

  18. Multipolarity analysis for 14C high-energy resonance populated by (18O,16O) two-neutron transfer reaction

    International Nuclear Information System (INIS)

    Carbone, D.; Cavallaro, M.; Bondì, M.; Agodi, C.; Cunsolo, A.; Cappuzzello, F.; Azaiez, F.; Franchoo, S.; Khan, E.; Bonaccorso, A.; Fortunato, L.; Foti, A.; Linares, R.; Lubian, J.; Scarpaci, J. A.; Vitturi, A.

    2015-01-01

    The 12 C( 18 O, 16 O) 14 C reaction at 84 MeV incident energy has been explored up to high excitation energy of the residual nucleus thanks to the use of the MAGNEX spectrometer to detect the ejectiles. In the region above the two-neutron separation energy, a resonance has been observed at 16.9 MeV. A multipolarity analysis of the cross section angular distribution indicates an L = 0 character for such a transition

  19. Surface water processes in the Indonesian throughflow as documented by a high-resolution coral Δ14C record

    Science.gov (United States)

    Fallon, Stewart J.; Guilderson, Thomas P.

    2008-09-01

    To explore the seasonal to decadal variability in surface water masses that contribute to the Indonesian throughflow, we have generated a 115-year bimonthly coral-based radiocarbon time series from a coral in the Makassar Straits. In the pre-bomb (pre-1955) era from 1890 to 1954, the radiocarbon time series occasionally displays a small seasonal signal (10-15‰). After 1954 the radiocarbon record increases rapidly, in response to the increased atmospheric 14C content caused by nuclear weapons testing. From 1957 to 1986 the record displays clear seasonal variability from 15 to 60‰ and the post-bomb peak (163 per mil) occurred in 1974. The seasonal cycle of radiocarbon can be attributed to variations of surface waters passing through the South Makassar Strait. Southern Makassar is under the influence of the Northwest Monsoon, which is responsible for the high austral summer radiocarbon (North Pacific waters) and the Southeast Monsoon that flushes back a mixture of low (South Pacific and upwelling altered) radiocarbon water from the Banda Sea. The coral record also shows a significant 14C peak in 1955 due to the bomb-14C water advected into this region from nuclear weapons tests in the Marshall Islands in 1954.

  20. Method of preparing uridine-diphospho-/sup 14/C-D-glucose of high molar activity and radiochemical purity by enzyme synthesis

    Energy Technology Data Exchange (ETDEWEB)

    Farkas, V; Biely, P; Koelbl, J

    1980-06-15

    A new method is described of enzyme synthesis of uridine-diphospho-/sup 14/C-D-glucose of high molar activity. After conversion of the initial /sup 14/C-D-glucose, the accompanying sugar phosphates and nucleoside-5'-phosphates are selectively hydrolyzed by the action of alkaline phosphatase in the presence of phenolphthalein as an indicator. Uridine-diphospho-/sup 14/C-D-glucose is separated by paper chromatography from the reaction mixture thus modified. Synthesis yields range within 75% and 85% relative to the starting /sup 14/C-D-glucose.

  1. Simple syntheses of 3-substituted indoles and their application for high yield 14C-labelling

    International Nuclear Information System (INIS)

    Schallenberg, J.; Meyer, E.

    1983-01-01

    Methods are described which allow the synthesis of several plant indole alkaloids and their metabolites at different scales. Compounds synthesized include gramine (1) (3-dimethylaminomethylindole) which is directly derived from indole, while its biosynthetic precursors 3-aminomethylindole (3) and 3-methylaminomethylindole (2) as well as indole3-carboxylic acid (7) are synthesized via indole-3-aldehyde (6). Slight changes of the experimental conditions allow syntheses with high yields not only at the molar but also at the μmolar level. This is extremely useful when isotope labelled compounds of high specific radioactivity are required for studies of plant metabolism. (orig.)

  2. Utilization of [1-14C]carbon of glycine of high glycine diet fed young and old rats

    International Nuclear Information System (INIS)

    Petzke, K.J.; Albrecht, V.; Medovar, B.Ya.; Pisarczuk, K.L.; Grigorov, Yu.G.

    1987-01-01

    The incorporation of radioactivity from [1- 14 C]glycine was studied in various organ (serum, liver, muscle) fractions (acid soluble, proteins, lipids, liver glycogen) and carbon dioxide in rats fed with isonitrogenous isocaloric purfied diets. The diets contained 30% casein (control), gelatin (exchange of half of the 30% casein) or glycine (corresponding level of glycine in relation to the gelatin diet). The incorporation of radioactivity into proteins was reduced by feeding high glycine diets in young (20-weeks-old) and old (18-month-old) rats in relation to the control diet. The modifications of the results for old animals may be partially explained on the base of a reduced protein turnover rate and adaptation to a high gelatin (glycine) diet. (author)

  3. A convenient synthesis of sup 14 C-cotinine from sup 14 C-nicotine

    Energy Technology Data Exchange (ETDEWEB)

    Desai, D.H.; Djordjevic, M.V.; Amin, S. (American Health Foundation, Valhalla, NY (USA). Naylor Dana Inst. for Disease Prevention)

    1991-03-01

    A convenient synthesis with analytical monitoring of {sup 14}C-cotinine is reported. {sup 14}C-Nicotine was converted into {sup 14}C-dibromocotinine hydrobromide perbromide. Debromination, achieved by using Zn dust/acetic acid, resulted in high yields (71%) of {sup 14}C-cotinine. (author).

  4. Metabolism of high density lipoproteins reconstituted with [3H]cholesteryl ester and [14C]cholesterol in the rat, with special reference to the ovary

    International Nuclear Information System (INIS)

    Nestler, J.E.; Bamberger, M.; Rothblat, G.H.; Strauss, J.F. III

    1985-01-01

    In order to study the metabolism of high density lipoprotein (HDL)-carried sterol in the rat, human HDL was reconstituted with [ 14 C]cholesterol and [ 3 H]cholesteryl ester. After iv injection into immature PMSG-human CG primed rats pretreated with 4-aminopyrazolopyrimidine and aminoglutethimide, there was time-dependent accumulation of 3 H and 14 C in various organs which reached a maximum by 15-90 min. On a milligram wet weight basis, uptake of 3 H and 14 C was greatest in the adrenals, next in ovaries, followed by the liver, with little uptake by kidneys and spleen. On an organ basis, accumulation was greatest by the liver. Coadministration of excess unlabeled HDL, but not human low density lipoprotein, reduced accumulation of radioactivity by the ovaries and adrenals by 60%, indicating a specific and saturable uptake process. Granulosa cells cultured in lipoprotein-deficient medium with reconstituted HDL formed 3 H- and 14 C-labeled 20 alpha-hydroxypregn-4-en-3-one. Over a 24-h period, utilization of both [ 14 C]cholesterol and [ 3 H]cholesteryl ester was linear, but rates of utilization of the two sterol moieties were not parallel. Lysosomotropic agents had no effect on utilization of either free or esterified cholesterol for steroidogenesis but reduced degradation of 125 I-labeled low density lipoprotein apoprotein. These findings lend further support to the concept of a distinct HDL pathway in steroidogenic cells of the rat

  5. Rarotonga Radiocarbon (delta 14C) for 1950 to 1997

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Rarotonga coral radiocarbon (14C) timeseries. Coral radiocarbon (Delta-14C) on untreated, low-speed drilled samples. Precision is +/- 4 per mil as documented by an...

  6. High precision redundant robotic manipulator

    International Nuclear Information System (INIS)

    Young, K.K.D.

    1998-01-01

    A high precision redundant robotic manipulator for overcoming contents imposed by obstacles or imposed by a highly congested work space is disclosed. One embodiment of the manipulator has four degrees of freedom and another embodiment has seven degrees of freedom. Each of the embodiments utilize a first selective compliant assembly robot arm (SCARA) configuration to provide high stiffness in the vertical plane, a second SCARA configuration to provide high stiffness in the horizontal plane. The seven degree of freedom embodiment also utilizes kinematic redundancy to provide the capability of avoiding obstacles that lie between the base of the manipulator and the end effector or link of the manipulator. These additional three degrees of freedom are added at the wrist link of the manipulator to provide pitch, yaw and roll. The seven degrees of freedom embodiment uses one revolute point per degree of freedom. For each of the revolute joints, a harmonic gear coupled to an electric motor is introduced, and together with properly designed based servo controllers provide an end point repeatability of less than 10 microns. 3 figs

  7. Effects of source and sink manipulation on distribution of 14C-assimilate and endogenous hormone contents of high-yield cotton in Xinjiang

    International Nuclear Information System (INIS)

    Luo Honghai; Zhao Ruihai; Li Junhua; Zhang Yali; Zhang Wangfeng

    2011-01-01

    Effects of leaf-cutting and bud-thinning treatment on partitioning of 14 C-assimilate and endogenous hormone contents of source leaf (respective axial leaf and sympodian leaf) during flowering and boll-setting stage in high-yield cotton were studied by using Gossipium hirsutum L. cv. Xinluzao 132 as plant material. Results showed that bud-thinning reduced the peak value of indole-3-acetic acid (IAA) delayed the accumulation of isopenteny ladenime and its riboside (iP + iPA), and decreased the contents of abscisic acid (ABA) zeatin and its riboside (Z + ZR) of source leaf. Thus, the export and partitioning of percentage of 14 C-assimilate in boll was significantly decreased at full bolling and boll opening stages. As a result, both of boll weight and yield in bud-thinning were significantly lower than control. Leaf-cutting significantly improved the content of cytokinins (CTKs) and the distributive percentage of 14 C-assimilates in boll. Furthermore, when leaves were cut 1/4 at anthesis, no differences were found in number of bolls per plant, boll weight and yield compared with control. These results suggested that regulating source-sink relation with key practices of cultivation would be of great importance to super-high and stable yield of cotton, as it would affect the changes of endogenous hormone levels and regulate the distribution of 14 C-assimilate between source and sink. (authors)

  8. A 3500 14C yr High-Resolution Record of Water-Level Changes in Lake Titicaca, Bolivia/Peru

    Science.gov (United States)

    Abbott, Mark B.; Binford, Michael W.; Brenner, Mark; Kelts, Kerry R.

    1997-03-01

    Sediment cores collected from the southern basin of Lake Titicaca (Bolivia/Peru) on a transect from 4.6 m above overflow level to 15.1 m below overflow level are used to identify a new century-scale chronology of Holocene lake-level variations. The results indicate that lithologic and geochemical analyses on a transect of cores can be used to identify and date century-scale lake-level changes. Detailed sedimentary analyses of subfacies and radiocarbon dating were conducted on four representative cores. A chronology based on 60 accelerator mass spectrometer radiocarbon measurements constrains the timing of water-level fluctuations. Two methods were used to estimate the 14C reservoir age. Both indicate that it has remained nearly constant at ˜250 14C yr during the late Holocene. Core studies based on lithology and geochemistry establish the timing and magnitude of five periods of low lake level, implying negative moisture balance for the northern Andean altiplano over the last 3500 cal yr. Between 3500 and 3350 cal yr B.P., a transition from massive, inorganic-clay facies to laminated organic-matter-rich silts in each of the four cores signals a water-level rise after a prolonged mid-Holocene dry phase. Evidence of other significant low lake levels occurs 2900-2800, 2400-2200, 2000-1700, and 900-500 cal yr B.P. Several of the low lake levels coincided with cultural changes in the region, including the collapse of the Tiwanaku civilization.

  9. High precision anatomy for MEG.

    Science.gov (United States)

    Troebinger, Luzia; López, José David; Lutti, Antoine; Bradbury, David; Bestmann, Sven; Barnes, Gareth

    2014-02-01

    Precise MEG estimates of neuronal current flow are undermined by uncertain knowledge of the head location with respect to the MEG sensors. This is either due to head movements within the scanning session or systematic errors in co-registration to anatomy. Here we show how such errors can be minimized using subject-specific head-casts produced using 3D printing technology. The casts fit the scalp of the subject internally and the inside of the MEG dewar externally, reducing within session and between session head movements. Systematic errors in matching to MRI coordinate system are also reduced through the use of MRI-visible fiducial markers placed on the same cast. Bootstrap estimates of absolute co-registration error were of the order of 1mm. Estimates of relative co-registration error were <1.5mm between sessions. We corroborated these scalp based estimates by looking at the MEG data recorded over a 6month period. We found that the between session sensor variability of the subject's evoked response was of the order of the within session noise, showing no appreciable noise due to between-session movement. Simulations suggest that the between-session sensor level amplitude SNR improved by a factor of 5 over conventional strategies. We show that at this level of coregistration accuracy there is strong evidence for anatomical models based on the individual rather than canonical anatomy; but that this advantage disappears for errors of greater than 5mm. This work paves the way for source reconstruction methods which can exploit very high SNR signals and accurate anatomical models; and also significantly increases the sensitivity of longitudinal studies with MEG. © 2013. Published by Elsevier Inc. All rights reserved.

  10. High precision anatomy for MEG☆

    Science.gov (United States)

    Troebinger, Luzia; López, José David; Lutti, Antoine; Bradbury, David; Bestmann, Sven; Barnes, Gareth

    2014-01-01

    Precise MEG estimates of neuronal current flow are undermined by uncertain knowledge of the head location with respect to the MEG sensors. This is either due to head movements within the scanning session or systematic errors in co-registration to anatomy. Here we show how such errors can be minimized using subject-specific head-casts produced using 3D printing technology. The casts fit the scalp of the subject internally and the inside of the MEG dewar externally, reducing within session and between session head movements. Systematic errors in matching to MRI coordinate system are also reduced through the use of MRI-visible fiducial markers placed on the same cast. Bootstrap estimates of absolute co-registration error were of the order of 1 mm. Estimates of relative co-registration error were < 1.5 mm between sessions. We corroborated these scalp based estimates by looking at the MEG data recorded over a 6 month period. We found that the between session sensor variability of the subject's evoked response was of the order of the within session noise, showing no appreciable noise due to between-session movement. Simulations suggest that the between-session sensor level amplitude SNR improved by a factor of 5 over conventional strategies. We show that at this level of coregistration accuracy there is strong evidence for anatomical models based on the individual rather than canonical anatomy; but that this advantage disappears for errors of greater than 5 mm. This work paves the way for source reconstruction methods which can exploit very high SNR signals and accurate anatomical models; and also significantly increases the sensitivity of longitudinal studies with MEG. PMID:23911673

  11. Atmospheric 14C variations derived from tree rings during the early Younger Dryas

    Science.gov (United States)

    Hua, Quan; Barbetti, Mike; Fink, David; Kaiser, Klaus Felix; Friedrich, Michael; Kromer, Bernd; Levchenko, Vladimir A.; Zoppi, Ugo; Smith, Andrew M.; Bertuch, Fiona

    2009-12-01

    Atmospheric radiocarbon variations over the Younger Dryas interval, from ˜13,000 to 11,600 cal yr BP, are of immense scientific interest because they reveal crucial information about the linkages between climate, ocean circulation and the carbon cycle. However, no direct and reliable atmospheric 14C records based on tree rings for the entire Younger Dryas have been available. In this paper, we present (1) high-precision 14C measurements on the extension of absolute tree-ring chronology from 12,400 to 12,560 cal yr BP and (2) high-precision, high-resolution atmospheric 14C record derived from a 617-yr-long tree-ring chronology of Huon pine from Tasmania, Australia, spanning the early Younger Dryas. The new tree-ring 14C records bridge the current gap in European tree-ring radiocarbon chronologies during the early Younger Dryas, linking the floating Lateglacial Pine record to the absolute tree-ring timescale. A continuous and reliable atmospheric 14C record for the past 14,000 cal yr BP including the Younger Dryas is now available. The new records indicate that the abrupt rise in atmospheric Δ 14C associated with the Younger Dryas onset occurs at ˜12,760 cal yr BP, ˜240 yrs later than that recorded in Cariaco varves, with a smaller magnitude of ˜40‰ followed by several centennial Δ 14C variations of 20-25‰. Comparing the tree-ring Δ 14C to marine-derived Δ 14C and modelled Δ 14C based on ice-core 10Be fluxes, we conclude that changes in ocean circulation were mainly responsible for the Younger Dryas onset, while a combination of changes in ocean circulation and 14C production rate were responsible for atmospheric Δ 14C variations for the remainder of the Younger Dryas.

  12. High precision Standard Model Physics

    International Nuclear Information System (INIS)

    Magnin, J.

    2009-01-01

    The main goal of the LHCb experiment, one of the four large experiments of the Large Hadron Collider, is to try to give answers to the question of why Nature prefers matter over antimatter? This will be done by studying the decay of b quarks and their antimatter partners, b-bar, which will be produced by billions in 14 TeV p-p collisions by the LHC. In addition, as 'beauty' particles mainly decay in charm particles, an interesting program of charm physics will be carried on, allowing to measure quantities as for instance the D 0 -D-bar 0 mixing, with incredible precision.

  13. The development of a high performance liquid chromatograph with a sensitive on-stream radioactivity monitor for the analysis of 3H- and 14C-labelled gibberellins

    International Nuclear Information System (INIS)

    Reeve, D.R.; Yokota, T.; Nash, L.; Crozier, A.

    1976-01-01

    The development of a high performance liquid chromatograph for the separation of gibberellins is described. The system combines high efficiency, peak capacity, and sample capacity with rapid speed of analysis. In addition, the construction details of a sensitive on-stream radioactivity monitor are outlined. The overall versatility of the chromatograph has been demonstrated by the separation of a range of 3 H- and 14 C-labelled gibberellins and gibberellin precursors. The system also has considerable potential for the analysis of abscisic acid and acidic and neutral indoles. (author)

  14. Multipolarity analysis for {sup 14}C high-energy resonance populated by ({sup 18}O,{sup 16}O) two-neutron transfer reaction

    Energy Technology Data Exchange (ETDEWEB)

    Carbone, D., E-mail: carboned@lns.infn.it; Cavallaro, M.; Bondì, M.; Agodi, C.; Cunsolo, A. [INFN-Laboratori Nazionali del Sud, Catania (Italy); Cappuzzello, F. [INFN-Laboratori Nazionali del Sud, Catania (Italy); Dipartimento di Fisica e Astronomia, Università di Catania, Catania (Italy); Azaiez, F.; Franchoo, S.; Khan, E. [Institut de Physique Nucleaire, Universitè Paris-Sud, Orsay (France); Bonaccorso, A. [INFN-Sezione di Pisa, Pisa (Italy); Fortunato, L. [Dipartimento di Fisica e Astronomia, Università di Padova, Padova (Italy); INFN-Sezione di Padova, Padova (Italy); Foti, A. [Dipartimento di Fisica e Astronomia, Università di Catania, Catania (Italy); INFN-Sezione di Catania, Catania (Italy); Linares, R.; Lubian, J. [Instituto de Fisica, Universidade Federal Fluminense, Niteroi (Brazil); Scarpaci, J. A. [Centre de Sciences Nucleaires et de Sciences de Matieres, Universitè Paris-Sud, Orsay (France); Vitturi, A. [INFN-Sezione di Padova, Padova (Italy); INFN-Sezione di Catania, Catania (Italy)

    2015-10-15

    The {sup 12}C({sup 18}O,{sup 16}O){sup 14}C reaction at 84 MeV incident energy has been explored up to high excitation energy of the residual nucleus thanks to the use of the MAGNEX spectrometer to detect the ejectiles. In the region above the two-neutron separation energy, a resonance has been observed at 16.9 MeV. A multipolarity analysis of the cross section angular distribution indicates an L = 0 character for such a transition.

  15. High - speed steel for precise cased tools

    International Nuclear Information System (INIS)

    Karwiarz, J.; Mazur, A.

    2001-01-01

    The test results of high-vanadium high - speed steel (SWV9) for precise casted tools are presented. The face -milling cutters of NFCa80A type have been tested in industrial operating conditions. An average life - time of SWV9 steel tools was 3-10 times longer compare to the conventional high - speed milling cutters. Metallography of SWB9 precise casted steel revealed beneficial for tool properties distribution of primary vanadium carbides in the steel matrix. Presented results should be a good argument for wide application of high - vanadium high - speed steel for precise casted tools. (author)

  16. High precision thermal neutron detectors

    Energy Technology Data Exchange (ETDEWEB)

    Radeka, V.; Schaknowski, N.A.; Smith, G.C.; Yu, B. [Brookhaven National Laboratory, Upton, NY (United States)

    1994-12-31

    Two-dimensional position sensitive detectors are indispensable in neutron diffraction experiments for determination of molecular and crystal structures in biology, solid-state physics and polymer chemistry. Some performance characteristics of these detectors are elementary and obvious, such as the position resolution, number of resolution elements, neutron detection efficiency, counting rate and sensitivity to gamma-ray background. High performance detectors are distinguished by more subtle characteristics such as the stability of the response (efficiency) versus position, stability of the recorded neutron positions, dynamic range, blooming or halo effects. While relatively few of them are needed around the world, these high performance devices are sophisticated and fairly complex, their development requires very specialized efforts. In this context, we describe here a program of detector development, based on {sup 3}He filled proportional chambers, which has been underway for some years at the Brookhaven National Laboratory. Fundamental approaches and practical considerations are outlined that have resulted in a series of high performance detectors with the best known position resolution, position stability, uniformity of response and reliability over time, for devices of this type.

  17. 14C Records from Indonesian Sea

    International Nuclear Information System (INIS)

    Baresic, J.; Fallon, S.; Mazerat, J.

    2013-01-01

    To investigate ocean currents and past climate events affecting the Indonesian throughflow (ITF), a radiocarbon record from a Porites coral collected from Alor Island, Indonesia, was constructed. Porites corals are often used in paleoclimate research and water mass circulation studies in the Tropics because of their abundance in the region and growth rate of 8 - 20 mm/y. These characteristics allow reconstructions of past environmental changes on weekly to annual time scales. At this point radiocarbon coral results from Alor cover approximately 30 years. An age model was constructed using the sea surface temperature proxy δ18O. Alor radiocarbon results were compared with previous measurements obtained from Padang and Langkai corals. a14C values obtained from the Alor coral display a strong seasonal cycle, high values during Australian summer and low values during Australian winter. Higher a 14C summer values indicate inflow of waters enriched by 14C through Makassar Strait from the North Pacific Ocean and Java Sea surface water. Summer a14C values are also enhanced by summer stratification. Winter values indicate upwelling of deep Ocean waters within the research area and transport of 14C-depleted waters from the Banda Sea, which has input from the South Pacific Ocean (lower a14C than North Pacific). Therefore, the a14C coral record reflects the movement of enriched water from North Pacific to Indian Ocean through Makassar Strait during summer and upwelling of depleted surface waters from the Banda Sea during the winter. Lower a14C dips could be attributed to strong El Nino events, which would enhance surface water mixing and upwelling of low radiocarbon deep waters. Water transport from North Pacific Ocean decreases during El Nino events also contributing to lowering of a14C signal.(author)

  18. How accurate is the 14C method

    International Nuclear Information System (INIS)

    Nydal, R.

    1979-01-01

    Radiocarbon daters have in recent years focussed their interest on accuracy and reliability of 14 C dates. The use of dates for resolving fine chronological structures that are not dateable otherwise has stressed this point. The total uncertainty in dating an event is composed of errors relating to dating of the sample, i.e. uncertainty in measured quantities, deviations from assumed content of 14 C in material when alive; and errors related to quality of sample material, i.e. contamination from carbon of different age, diffuse context between sample and event. Statistical variability in counting of 14 C activity gives the most important contribution to measurement uncertainty - increasing with age and shortage of sample material. Corrections for isotopic fractionation and reservoir effects must be performed, and - most important when dates are compared with historical ages - the dendrochronological calibration will correct for past variations in the atmospheric 14 C content. Future improvement of dating precision can however only be obtained by the combined efforts of both daters and submitters of samples, thus minimizing errors related to selection and handling of sample material as well as those related to the 14 C method and measurements. (Auth.)

  19. High-Precision Computation and Mathematical Physics

    International Nuclear Information System (INIS)

    Bailey, David H.; Borwein, Jonathan M.

    2008-01-01

    At the present time, IEEE 64-bit floating-point arithmetic is sufficiently accurate for most scientific applications. However, for a rapidly growing body of important scientific computing applications, a higher level of numeric precision is required. Such calculations are facilitated by high-precision software packages that include high-level language translation modules to minimize the conversion effort. This paper presents a survey of recent applications of these techniques and provides some analysis of their numerical requirements. These applications include supernova simulations, climate modeling, planetary orbit calculations, Coulomb n-body atomic systems, scattering amplitudes of quarks, gluons and bosons, nonlinear oscillator theory, Ising theory, quantum field theory and experimental mathematics. We conclude that high-precision arithmetic facilities are now an indispensable component of a modern large-scale scientific computing environment.

  20. High-speed precision motion control

    CERN Document Server

    Yamaguchi, Takashi; Pang, Chee Khiang

    2011-01-01

    Written for researchers and postgraduate students in Control Engineering, as well as professionals in the Hard Disk Drive industry, this book discusses high-precision and fast servo controls in Hard Disk Drives (HDDs). The editors present a number of control algorithms that enable fast seeking and high precision positioning, and propose problems from commercial products, making the book valuable to researchers in HDDs. Each chapter is self contained, and progresses from concept to technique, present application examples that can be used within automotive, aerospace, aeronautical, and manufactu

  1. Bioconversion of α-[14C]Zearalenol and β-[14C]Zearalenol into [14C]Zearalenone by Fusarium roseum Gibbosum

    International Nuclear Information System (INIS)

    Richardson, K.E.; Hagler, W.M. Jr.; Hamilton, P.B.

    1984-01-01

    Cultures of Fusarium roseum Gibbosum on rice were treated with [ 14 C]zearalenone, α-[ 14 C]zearalenol, or β-[ 14 C]zearalenol to determine whether a precursor-product relationship exists among these closely related fungal metabolites. Culture extracts were purified by silica gel column chromatography and fractionated by high-pressure liquid chromatography, and the level of radioactivity was determined. Within 7 days, the β-[ 14 C]zearalenol was converted to zearalenone, and no residual β-[ 14 C]zearalenol was detectable. Most of the α-[ 14 C]zearalenol added was also converted into zearalenone within 14 days. In cultures treated with [ 14 C]zearalenone, no radioactivity was noted in any other components

  2. High precision, rapid laser hole drilling

    Science.gov (United States)

    Chang, Jim J.; Friedman, Herbert W.; Comaskey, Brian J.

    2013-04-02

    A laser system produces a first laser beam for rapidly removing the bulk of material in an area to form a ragged hole. The laser system produces a second laser beam for accurately cleaning up the ragged hole so that the final hole has dimensions of high precision.

  3. High precision detector robot arm system

    Science.gov (United States)

    Shu, Deming; Chu, Yong

    2017-01-31

    A method and high precision robot arm system are provided, for example, for X-ray nanodiffraction with an X-ray nanoprobe. The robot arm system includes duo-vertical-stages and a kinematic linkage system. A two-dimensional (2D) vertical plane ultra-precision robot arm supporting an X-ray detector provides positioning and manipulating of the X-ray detector. A vertical support for the 2D vertical plane robot arm includes spaced apart rails respectively engaging a first bearing structure and a second bearing structure carried by the 2D vertical plane robot arm.

  4. Automatic titrator for high precision plutonium assay

    International Nuclear Information System (INIS)

    Jackson, D.D.; Hollen, R.M.

    1986-01-01

    Highly precise assay of plutonium metal is required for accountability measurements. We have developed an automatic titrator for this determination which eliminates analyst bias and requires much less analyst time. The analyst is only required to enter sample data and start the titration. The automated instrument titrates the sample, locates the end point, and outputs the results as a paper tape printout. Precision of the titration is less than 0.03% relative standard deviation for a single determination at the 250-mg plutonium level. The titration time is less than 5 min

  5. May {sup 14}C be used to date contemporary art?

    Energy Technology Data Exchange (ETDEWEB)

    Fedi, M.E., E-mail: fedi@fi.infn.it [INFN Sezione di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Italy); Caforio, L. [INFN Sezione di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Italy); Dipartimento di Fisica, Universita di Ferrara, Via Saragat 1, 44100 Ferrara (Italy); Mando, P.A. [INFN Sezione di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Italy); Dipartimento di Fisica e Astronomia, Universita di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Italy); Petrucci, F. [Dipartimento di Fisica, Universita di Ferrara, Via Saragat 1, 44100 Ferrara (Italy); INFN Sezione di Ferrara, Via Saragat 1, 44100 Ferrara (Italy); Taccetti, F. [INFN Sezione di Firenze, Via Sansone 1, 50019 Sesto Fiorentino (Italy)

    2013-01-15

    The use of radiocarbon in forensics is by now widespread, thanks to the so-called bomb peak, which makes it possible to perform high-precision dating. Since 1955, {sup 14}C concentration in the atmosphere had strongly increased due to nuclear explosions, reaching its maximum value in 1963-1965. After the Nuclear Test Ban Treaty, {sup 14}C started to decrease as a consequence of the exchanges between atmosphere and the other natural carbon reservoirs. Nowadays, it is still slightly above the pre-bomb value. The work presented in this paper is based on the idea of exploiting the bomb peak to 'precisely' date works of contemporary art, with the aim at identifying possible fakes. We analysed two kinds of materials from the 20th century: newspapers and painting canvases. Newspaper samples were taken because they might in principle be considered to represent dated samples (considering the date on the issues). Our data (28 samples) show a trend similar to atmospheric data in the literature, although with some differences; the paper peak is flatter and shifted towards more recent years (about five years) with respect to the atmospheric data. This can be explained by taking paper manufacturing processes into account. As to the canvas samples, the measured {sup 14}C concentrations were generally reasonably consistent with the expected concentrations (based on the year on the paintings). However, this does not indicate that the interpretation of the results is simpler and more straightforward. Obviously, we only measure the {sup 14}C concentration of the fibre used for the canvas, which does not necessarily measure the date the painting was manufactured. In this paper, sample preparation and experimental results will be discussed, in order to show the potential as well as the limitations of radiocarbon to date contemporary art.

  6. An update on in situ cosmogenic {sup 14}C analysis at ETH Zuerich

    Energy Technology Data Exchange (ETDEWEB)

    Hippe, K., E-mail: hippe@erdw.ethz.ch [Institute of Geochemistry and Petrology, ETH Zuerich, Zuerich CH-8092 (Switzerland); Kober, F. [Institute of Geology, ETH Zuerich, Zuerich CH-8092 (Switzerland); Wacker, L. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Fahrni, S.M. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Department of Chemistry and Biochemistry, University of Bern, Bern CH-3012 (Switzerland); Ivy-Ochs, S. [Institute for Particle Physics, ETH Zuerich, Zuerich CH-8093 (Switzerland); Akcar, N.; Schluechter, C. [Institute of Geological Sciences, University of Bern, Bern CH-3012 (Switzerland); Wieler, R. [Institute of Geochemistry and Petrology, ETH Zuerich, Zuerich CH-8092 (Switzerland)

    2013-01-15

    We present the improved performance of the modified in situ cosmogenic {sup 14}C extraction system at ETH Zuerich. Samples are now processed faster (2 days in total) and are measured with a high analytical precision of usually <2% using the gas ion source of the MICADAS AMS facility. Measurements of the PP-4 standard sample show a good reproducibility and consistency with published values. Procedural blanks are very low at currently {approx}4.0 Multiplication-Sign 10{sup 414}C atoms. Analyses of samples from a {approx}300 year old rock avalanche prove that we can successfully apply in situ{sup 14}C exposure dating to very young surfaces. Additionally, we present a modified calculation scheme for in situ{sup 14}C concentrations which differs from that used for conventional radiocarbon dating. This new approach explicitly accounts for the characteristics of in situ{sup 14}C production.

  7. Metabolism and distribution of two 14C-benzidine-congener-based dyes in rats as determined by gas chromatography, high-pressure liquid chromatography, and radioassays. Final report Jan-Oct 81

    International Nuclear Information System (INIS)

    Oller, W.L.

    1983-04-01

    Absorption, metabolism, and tissue distribution studies were conducted in the rat with 14 C-biphenyl ring-labeled Direct Blue 15, a 3,3'-dimethoxybenzidine (DiMxBzd) based azo dye; Direct Red 2, based on 3,3'-dimethylbenzidine (DiMeBzd) and the corresponding benzidine congener amines. Single oral doses of the 14 C-labeled dyes (12 mg/kg, 62 micro Ci/kg) and molar equivalent doses of the respective amines were administered and urine and fecal samples collected at intervals up to 192 hours. Urine and fecal samples were analyzed for 14 C content. Most of the 14 C present in the urine could not be extracted with benzene nor chloroform, indicating high polarity. Distribution studies conducted with both dyes showed that liver, kidney, and lung accumulated and retained higher levels of 14 C than other tissues (at 72 hrs). Peak levels of 14 C, which occurred 8-12 hours after dosing, were significantly higher with Direct Red 2 than Direct Blue 15. Tissue distribution data (72 hr) for rats dosed with the free amines compared with the dyes showed a generally lower but similar distribution pattern

  8. Fiber Scrambling for High Precision Spectrographs

    Science.gov (United States)

    Kaplan, Zachary; Spronck, J. F. P.; Fischer, D.

    2011-05-01

    The detection of Earth-like exoplanets with the radial velocity method requires extreme Doppler precision and long-term stability in order to measure tiny reflex velocities in the host star. Recent planet searches have led to the detection of so called "super-Earths” (up to a few Earth masses) that induce radial velocity changes of about 1 m/s. However, the detection of true Earth analogs requires a precision of 10 cm/s. One of the largest factors limiting Doppler precision is variation in the Point Spread Function (PSF) from observation to observation due to changes in the illumination of the slit and spectrograph optics. Thus, this stability has become a focus of current instrumentation work. Fiber optics have been used since the 1980's to couple telescopes to high-precision spectrographs, initially for simpler mechanical design and control. However, fiber optics are also naturally efficient scramblers. Scrambling refers to a fiber's ability to produce an output beam independent of input. Our research is focused on characterizing the scrambling properties of several types of fibers, including circular, square and octagonal fibers. By measuring the intensity distribution after the fiber as a function of input beam position, we can simulate guiding errors that occur at an observatory. Through this, we can determine which fibers produce the most uniform outputs for the severest guiding errors, improving the PSF and allowing sub-m/s precision. However, extensive testing of fibers of supposedly identical core diameter, length and shape from the same manufacturer has revealed the "personality” of individual fibers. Personality describes differing intensity patterns for supposedly duplicate fibers illuminated identically. Here, we present our results on scrambling characterization as a function of fiber type, while studying individual fiber personality.

  9. 14C Behaviour in PWR coolant

    International Nuclear Information System (INIS)

    Sims, Howard; Dickinson Shirley; Garbett, Keith

    2012-09-01

    Although 14 C is produced in relatively small amounts in PWR coolant, it is important to know its fate, for example whether it is released by gaseous discharge, removed by absorption on ion exchange (IX) resins or deposited on the fuel pin surfaces. 14 C can exist in a range of possible chemical forms: inorganic carbon compounds (probably mainly CO 2 ), elemental carbon, and organic compounds such as hydrocarbons. This paper presents results from a preliminary survey of the possible reactions of 14 C in PWR coolant. The main conclusions of the study are: - A combination of thermal and radiolytic reactions controls the chemistry of 14 C in reactor coolant. A simple chemical kinetic model predicts that CH 3 OH would be the initial product from radiolytic reactions of 14 C following its formation from 17 O. CH 3 OH is predicted to arise as a result of reactions of OH . with CH 4 and CH 3 , and it persists because there is no known radiation chemical reduction mechanism. - Thermodynamic considerations show that CH 3 OH can be thermally reduced to CH 4 in PWR conditions, although formation of CO 2 from small organics is the most thermodynamically favourable outcome. Such reactions could be catalysed on active nickel surfaces in the primary circuit. - Limited plant data would suggest that CH 4 is the dominant form in PWR and CO 2 in BWR. This implies that radiation chemistry may be important in determining the speciation. - Addition of acetate does not affect the amount of 14 C formed, but the addition of large amounts of stable carbon would lead to a large range of additional products, some of which would be expected to deposit on fuel pin surfaces as high molecular weight hydrocarbons. However, the subsequent thermal decomposition reactions of these products are not known. - Acetate addition may represent a small input of 12 C compared with organic material released from CVCS resins, although the importance of this may depend on whether that is predominantly soluble

  10. Urvina Bay, Galapagos Coral Radiocarbon (delta 14C) Data for 1956 to 1982

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — Urvina Bay coral radiocarbon (14C) timeseries. (90 deg W, 0.5 deg S) Coral radiocarbon (Delta-14C) on untreated, low-speed drilled samples. Precision is +/- 4 per...

  11. May 14C be used to date contemporary art?

    International Nuclear Information System (INIS)

    Fedi, M.E.; Caforio, L.; Mandò, P.A.; Petrucci, F.; Taccetti, F.

    2013-01-01

    The use of radiocarbon in forensics is by now widespread, thanks to the so-called bomb peak, which makes it possible to perform high-precision dating. Since 1955, 14 C concentration in the atmosphere had strongly increased due to nuclear explosions, reaching its maximum value in 1963–1965. After the Nuclear Test Ban Treaty, 14 C started to decrease as a consequence of the exchanges between atmosphere and the other natural carbon reservoirs. Nowadays, it is still slightly above the pre-bomb value. The work presented in this paper is based on the idea of exploiting the bomb peak to “precisely” date works of contemporary art, with the aim at identifying possible fakes. We analysed two kinds of materials from the 20th century: newspapers and painting canvases. Newspaper samples were taken because they might in principle be considered to represent dated samples (considering the date on the issues). Our data (28 samples) show a trend similar to atmospheric data in the literature, although with some differences; the paper peak is flatter and shifted towards more recent years (about five years) with respect to the atmospheric data. This can be explained by taking paper manufacturing processes into account. As to the canvas samples, the measured 14 C concentrations were generally reasonably consistent with the expected concentrations (based on the year on the paintings). However, this does not indicate that the interpretation of the results is simpler and more straightforward. Obviously, we only measure the 14 C concentration of the fibre used for the canvas, which does not necessarily measure the date the painting was manufactured. In this paper, sample preparation and experimental results will be discussed, in order to show the potential as well as the limitations of radiocarbon to date contemporary art.

  12. Forensic applications of {sup 14}C at CIRCE

    Energy Technology Data Exchange (ETDEWEB)

    Marzaioli, F., E-mail: fabio.marzaioli@unina2.it [CIRCE, Dipartimento di Scienze Ambientali, Seconda Universita degli Studi di Napoli and INNOVA, Via Vivaldi 43, 81100 Caserta (Italy); Fiumano, V., E-mail: vittoriofiumano85@libero.it [CIRCE, Dipartimento di Scienze della Vita, Seconda Universita degli Studi di Napoli and INNOVA, Via Vivaldi 43, 81100 Caserta (Italy); Capano, M., E-mail: manuela.capano@unina2.it [CIRCE, Dipartimento di Studio delle Componenti Culturali del Territorio, Seconda Universita degli Studi di Napoli and INNOVA, Piazza S. Francesco, 81055 Santa Maria Capua Vetere, Caserta (Italy); Passariello, I., E-mail: isabella.passariello@unina2.it [CIRCE, Dipartimento di Scienze Ambientali, Seconda Universita degli Studi di Napoli and INNOVA, Via Vivaldi 43, 81100 Caserta (Italy); Cesare, N.De., E-mail: nicola.decesare@unina2.it [CIRCE, Dipartimento di Scienze della Vita, Seconda Universita degli Studi di Napoli and INNOVA, Via Vivaldi 43, 81100 Caserta (Italy); Terrasi, F., E-mail: filippo.terrasi@unina2.it [CIRCE, Dipartimento di Scienze Ambientali, Seconda Universita degli Studi di Napoli and INNOVA, Via Vivaldi 43, 81100 Caserta (Italy)

    2011-12-15

    The decreasing trend of the radiocarbon pulse produced during the atmospheric tests of nuclear weapons (bomb-carbon) coupled with high sensitivity accelerator mass spectrometry (AMS) measurements, drastically increased the precision of radiocarbon age determinations since the second part of the sixties, allowing the application of radiocarbon AMS to a wide range of studies previously not directly involving conventional radiocarbon dating (i.e. food authenticity, forensic, biochemistry). In the framework of authenticity evaluation of artworks, high precision radiocarbon ({sup 14}C) AMS measurements ({Delta}R/R < 0.3%) reduce the conventional uncertainty of the dating to few decades, allowing precise age estimation of materials containing carbon (C). The Centre for Isotopic Research on Cultural and Environmental heritage (CIRCE) during its activity on AMS {sup 14}C dating achieved high precision measurements opening the opportunity to these kinds of applications. This paper presents the main results obtained from radiocarbon measurements on a set of bone samples analyzed for the determination of the post-mortem interval in the framework of an unsolved case investigated by the Rome prosecutor office. The chronological characterization of the wooden support of the 'Acerenza portrait' is also presented with the aim to evaluate its age and to further investigate the possibility to attribute this artwork to Leonardo da Vinci. Bomb-{sup 14}C dating on the lipid and collagen fractions of bones allows the evaluation of the year of the death of the individuals by means of ad hoc calibration data sheet with the typical few years precision and difference between collagen apparent age and the year of death appeared in agreement with the age of one individual estimated by dating of tooth collagen. Conventional radiocarbon dating on both wood and wood extracted cellulose leads to an estimation of the portrait wood board age (2{sigma}) of 1459-1524 AD (57% relative

  13. Recent high precision surveys at PEP

    International Nuclear Information System (INIS)

    Sah, R.C.

    1980-12-01

    The task of surveying and aligning the components of PEP has provided an opportunity to develop new instruments and techniques for the purpose of high precision surveys. The new instruments are quick and easy to use, and they automatically encode survey data and read them into the memory of an on-line computer. When measurements of several beam elements have been taken, the on-line computer analyzes the measured data, compares them with desired parameters, and calculates the required adjustments to beam element support stands

  14. Digitalization of highly precise fluxgate magnetometers

    DEFF Research Database (Denmark)

    Cerman, Ales; Kuna, A.; Ripka, P.

    2005-01-01

    This paper describes the theory behind all three known ways of digitalizing the fluxgate magnetometers: analogue magnetometers with digitalized output using high resolution ADC, application of the delta-sigma modulation to the sensor feedback loop and fully digital signal detection. At present time...... the Delta-Sigma ADCs are mostly used for the digitalization of the highly precise fluxgate magnetorneters. The relevant part of the paper demonstrates some pitfalls of their application studied during the design of the magnetometer for the new Czech scientific satellite MIMOSA. The part discussing...... the application of the A-E modulation to the sensor feedback loop theoretically derives the main advantage of this method-increasing of the modulation order and shows its real potential compared to the analog magnetometer with consequential digitalization. The comparison is realized on the modular magnetometer...

  15. Synthesis of 14C-dehydrocorydaline chloride

    International Nuclear Information System (INIS)

    Zhang Rui; Wang Ding

    1988-01-01

    A method for synthesis of 14 C-dehydrocorydaline chloride is described. In the presence of sodium hydroxide, acetonylpalmatine is reacted with 14 C-methyl iodide in sealed glass ampoule to give 14 C-13-methylpalmatine iodide which is then converted to chloride. The radiochemical purity of 14 C-dehydrocorydaline determined by TLC is over 98% and the labelling efficiency is 54%

  16. High precision innovative micropump for artificial pancreas

    Science.gov (United States)

    Chappel, E.; Mefti, S.; Lettieri, G.-L.; Proennecke, S.; Conan, C.

    2014-03-01

    The concept of artificial pancreas, which comprises an insulin pump, a continuous glucose meter and a control algorithm, is a major step forward in managing patient with type 1 diabetes mellitus. The stability of the control algorithm is based on short-term precision micropump to deliver rapid-acting insulin and to specific integrated sensors able to monitor any failure leading to a loss of accuracy. Debiotech's MEMS micropump, based on the membrane pump principle, is made of a stack of 3 silicon wafers. The pumping chamber comprises a pillar check-valve at the inlet, a pumping membrane which is actuated against stop limiters by a piezo cantilever, an anti-free-flow outlet valve and a pressure sensor. The micropump inlet is tightly connected to the insulin reservoir while the outlet is in direct communication with the patient skin via a cannula. To meet the requirement of a pump dedicated to closed-loop application for diabetes care, in addition to the well-controlled displacement of the pumping membrane, the high precision of the micropump is based on specific actuation profiles that balance effect of pump elasticity in low-consumption push-pull mode.

  17. High precision timing in a FLASH

    Energy Technology Data Exchange (ETDEWEB)

    Hoek, Matthias; Cardinali, Matteo; Dickescheid, Michael; Schlimme, Soeren; Sfienti, Concettina; Spruck, Bjoern; Thiel, Michaela [Institut fuer Kernphysik, Johannes Gutenberg-Universitaet Mainz (Germany)

    2016-07-01

    A segmented highly precise start counter (FLASH) was designed and constructed at the Institute for Nuclear Physics in Mainz. Besides determining a precise reference time, a Time-of-Flight measurement can be performed with two identical FLASH units. Thus, particle identification can be provided for mixed hadron beam environments. The detector design is based on the detection of Cherenkov light produced in fused silica radiator bars with fast multi-anode MCP-PMTs. The segmentation of the radiator improves the timing resolution while allowing a coarse position resolution along one direction. Both, the arrival time and the Time-over-Threshold are determined by the readout electronics, which enables walk correction of the arrival time. The performance of two FLASH units was investigated in test experiments at the Mainz Microton (MAMI) using an electron beam with an energy of 855 MeV and at CERN's PS T9 beam line with a mixed hadron beam with momenta between 3-8 GeV/c. Effective Time-walk correction methods based on Time-over-Threshold were developed for the data analysis. The achieved Time-Of-Flight resolution after applying all corrections was found to be 70 ps. Furthermore, the PID and position resolution capabilities are discussed in this contribution.

  18. Towards High Productivity in Precision Grinding

    Directory of Open Access Journals (Sweden)

    W. Brian Rowe

    2018-04-01

    Full Text Available Over the last century, substantial advances have been made, based on improved understanding of the requirements of grinding processes, machines, control systems, materials, abrasives, wheel preparation, coolants, lubricants, and coolant delivery. This paper reviews a selection of areas in which the application of scientific principles and engineering ingenuity has led to the development of new grinding processes, abrasives, tools, machines, and systems. Topics feature a selection of areas where relationships between scientific principles and new techniques are yielding improved productivity and better quality. These examples point towards further advances that can fruitfully be pursued. Applications in modern grinding technology range from high-precision kinematics for grinding very large lenses and reflectors through to medium size grinding machine processes and further down to grinding very small components used in micro electro-mechanical systems (MEMS devices. The importance of material issues is emphasized for the range of conventional engineering steels, through to aerospace materials, ceramics, and composites. It is suggested that future advances in productivity will include the wider application of artificial intelligence and robotics to improve precision, process efficiency, and features required to integrate grinding processes into wider manufacturing systems.

  19. High precision neutron polarization for PERC

    International Nuclear Information System (INIS)

    Klauser, C.

    2013-01-01

    The decay of the free neutron into a proton, an electron and an anti-electron neutrino offers a simple system to study the semi-leptonic weak decay. High precision measurements of angular correlation coefficients of this decay provide the opportunity to test the standard model on the low energy frontier. The Proton Electron Radiation Channel PERC is part of a new generation of expriments pushing the accuracy of such an angular correlation coefficient measurement towards 10 -4 . Past experiments have been limited to an accuracy of 10 -3 with uncertainties on the neutron polarization as one of the leading systematic errors. This thesis focuses on the development of a stable, highly precise neutron polarization for a large, divergent cold neutron beam. A diagnostic tool that provides polarization higher than 99.99 % and analyzes with an accuracy of 10 -4 , the Opaque Test Bench, is presented and validated. It consists of two highly opaque polarized helium cells. The Opaque Test Bench reveals depolarizing effects in polarizing supermirrors commonly used for polarization in neutron decay experiments. These effects are investigated in detail. They are due to imperfect lateral magnetization in supermirror layers and can be minimized by significantly increased magnetizing fields and low incidence angle and supermirror factor m. A subsequent test in the crossed (X-SM) geometry demonstrated polarizations up to 99.97% from supermirrors only, improving neutron polarization with supermirrors by an order of magnitude. The thesis also discusses other neutron optical components of the PERC beamline: Monte-Carlo simulations of the beamline under consideration of the primary guide are carried out. In addition, calculation shows that PERC would statistically profit from an installation at the European Spallation source. Furthermore, beamline components were tested. A radio-frequency spin flipper was confirmed to work with an efficiency higher than 0.9999. (author) [de

  20. Environmental background 14C levels in Japan in 1990s

    International Nuclear Information System (INIS)

    Fuma, Shoichi; Inoue, Yoshikazu; Miyamoto, Kiriko; Takeda, Hiroshi; Iwakura, Tetsuo; Arai, Kiyohiko; Kashida, Yoshihiko; Ichimasa, Yusuke

    2002-01-01

    determined by the benzene synthesis-liquid scintillation counting or other methods. These methods of 14 C determination are not so simple as the method adopted in this study. It is therefore considered that the method of determination of the 14 C activities in wine ethanol is simple and precise enough to estimate the 14 C activities in atmospheric CO 2 and plants including crops, and thus contributes to assessment of doses due to environmental 14 C. (author)

  1. Detection, concentrations and distribution of paxilline, an animal neurotoxin, in mouse brain: an application of ultra-high sensitivity detection of 14C by accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Roberts, P.B.; Kim, K.

    1999-01-01

    Full text: Paxilline is an intermediate in the biosynthesis of lolitrem neurotoxins that cause the disorder rye grass staggers in livestock grazing on pastures infected with certain fungi. Paxilline itself produces similar symptoms and the 14 C-labelled compound has been produced bio-synthetically at low specific activity. Using conventional liquid scintillation counting it was not possible to detect the labelled compound in the brain of mice sacrificed at the time they displayed physiological symptoms. Accelerator mass spectrometry (AMS) counts 14 C atoms, not decays, and provides sensitivity 10,000-100,000 times greater than conventional scintillation counting of radioactive decays. Measurements are easily obtained at the level of the natural abundance of 14 C in living tissue of 6fCi or 10 -16 moles 14 C per mg total carbon. Extraction of the labelled compound from the tissue is unnecessary and sample size can be 0.01-10mg. Paxilline (8mg/kg ip) was given to 25g mice. The total activity injected was 11,000 dpm though the results showed that 1,000dpm would have been sufficient. The concentration of paxilline in homogenised whole brain was determined to be 985 pg or 0.0075 dpm mg dry tissue. The concentration in the major brain segments ranged from 893-1137 pgmg dry tissue. The spinal cord contained 719 pg/mg dry tissue. Our results suggest that toxicologists and pharmacologists should consider what new information may be obtained by combining tracer studies with the power of AMS detection. The AMS method makes possible great reductions in the amount of label and sample sizes, plus wider ranges in concentration/time course studies. In particular, it opens up new possibilities such as: studies at true dietary or environmental levels; tracer studies in large animal or plant systems; field trials; human studies where radiation dose must be considered; and studies with compounds that can only be synthesised with low specific activity. Copyright (1999) Australasian

  2. Precision laser spectroscopy of highly charged ions

    International Nuclear Information System (INIS)

    Kuehl, T.; Borneis, S.; Becker, S.; Dax, A.; Engel, T.; Grieser, R.; Huber, G.; Klaft, I.; Klepper, O.; Kohl, A.; Marx, D.; Meier, K.; Neumann, R.; Schmitt, F.; Seelig, P.; Voelker, L.

    1996-01-01

    Recently, intense beams of highly charged ions have become available at heavy ion cooler rings. The obstacle for producing these highly interesting candidates is the large binding energy of K-shell electrons in heavy systems in excess of 100 keV. One way to remove these electrons is to strip them off by passing the ion through material. In the cooler ring, the ions are cooled to a well defined velocity. At the SIS/ESR complex it is possible to produce, store, and cool highly charged ions up to bare uranium with intensities exceeding 10 8 atoms in the ring. This opens the door for precision laser spectroscopy of hydrogenlike-heavy ions, e.g. 209 Bi 82+ , and allows to examine the interaction of the single electron with the large fields of the heavy nucleus, exceeding any artificially produced electric and magnetic fields by orders of magnitude. In the electron cooler the interaction of electrons and highly charged ions otherwise only present in the hottest plasmas can be studied. (orig.)

  3. Behaviors of 14C-butachlor, 14C-chlorpyrifos and 14C-DDT in Rana japonica japonica Guenther

    International Nuclear Information System (INIS)

    Zhang Yiqiang; Zhong Chuangguang; Zhao Xiaokui; Chen Shunhua

    2002-01-01

    The research on the behaviors of 14 C-butachlor, 14 C-chlorpyrifos and 14 C-DDT in the frog Rana japonica japonica Guenther was carried out. After administrated per os to the frogs in doses of 380, 347, 363 Bq/g, 14 C-butachlor, 14 C-chlorpyrifos and 14 C-DDT, were distributed respectively to various organs within 24 h with specific accumulating organs as gallbladder, intestine and intestine, relevantly to the pesticides described. Compared to that in gallbladder and intestine, the radioactivity of many organs was extremely low, and this might due to the characters of the pesticides. Analysis of the metabolites of 14 C-DDT in frog at 24 th hr demonstrated that DDT was difficult to be degraded. Most 14 C-butachlor, 14 C-chlorpyrifos 14 C-DDT in liver and fat or ovary of frog was extractable with acetone. However, there were some differences between the pesticides, and the organs as well. And 14 C-butachlor, 14 C-chlorpyrifos or 14 C-DDT were better bound in liver than in fat

  4. 14C analysis via intracavity optogalvanic spectroscopy

    International Nuclear Information System (INIS)

    Murnick, Daniel; Dogru, Ozgur; Ilkmen, Erhan

    2010-01-01

    A new ultra sensitive laser-based analytical technique, intracavity optogalvanic spectroscopy (ICOGS), allowing extremely high sensitivity for detection of 14 C-labeled carbon dioxide has recently been demonstrated. Capable of replacing accelerator mass spectrometers (AMS) for many applications, the technique quantifies zeptomoles of 14 C in sub micromole CO 2 samples. Based on the specificity of narrow laser resonances coupled with the sensitivity provided by standing waves in an optical cavity, and detection via impedance variations, limits of detection near 10 -1514 C/ 12 C ratios have been obtained with theoretical limits much lower. Using a 15 W 14 CO 2 laser, a linear calibration with samples from 5 x 10 -15 to >1.5 x 10 -12 in 14 C/ 12 C ratios, as determined by AMS, was demonstrated. Calibration becomes non-linear over larger concentration ranges due to interactions between CO 2 and buffer gas, laser saturation effects and changes in equilibration time constants. The instrument is small (table top), low maintenance and can be coupled to GC or LC input. The method can also be applied to detection of other trace entities. Possible applications include microdosing studies in drug development, individualized sub-therapeutic tests of drug metabolism, carbon dating and real time monitoring of atmospheric radiocarbon.

  5. High precision relative position sensing system for formation flying spacecraft

    Data.gov (United States)

    National Aeronautics and Space Administration — We propose to develop and test an optical sensing system that provides high precision relative position sensing for formation flying spacecraft.  A high precision...

  6. Precision mechatronics based on high-precision measuring and positioning systems and machines

    Science.gov (United States)

    Jäger, Gerd; Manske, Eberhard; Hausotte, Tino; Mastylo, Rostyslav; Dorozhovets, Natalja; Hofmann, Norbert

    2007-06-01

    Precision mechatronics is defined in the paper as the science and engineering of a new generation of high precision systems and machines. Nanomeasuring and nanopositioning engineering represents important fields of precision mechatronics. The nanometrology is described as the today's limit of the precision engineering. The problem, how to design nanopositioning machines with uncertainties as small as possible will be discussed. The integration of several optical and tactile nanoprobes makes the 3D-nanopositioning machine suitable for various tasks, such as long range scanning probe microscopy, mask and wafer inspection, nanotribology, nanoindentation, free form surface measurement as well as measurement of microoptics, precision molds, microgears, ring gauges and small holes.

  7. 14C uncovers the past

    International Nuclear Information System (INIS)

    Anon.

    1977-01-01

    Radio-carbon dating, a method of dating prehistoric remains that has been developed since the Second World War, is based on the fact that all organic matter contains a radioactive isotope of carbon - 14 C- which, because it decays at a fixed rate, gives a good indication of the age of the substance. The CSIR's National Physical Research Laboratory entered the field of radio-carbon dating in 1967, when the Nature Isotopes Division was established. The division has become a world centre of excellence and much has been done to clear up the chronology of southern African prehistory. It has been found, for instance, that anatomically modern man appeared in southern Africa some 40000 years earlier than in Europe, and that the Zimbabwe ruins were built mainly around the year 1350 AD. The radio-carbon method can also be used to determine the age and flow rate of underground water and the rate at which tracer gases dissolve in the oceans, i.e. the efficiency with which the oceans cleanse the atmosphere from pollutants

  8. High precision spectrophotometric analysis of thorium

    International Nuclear Information System (INIS)

    Palmieri, H.E.L.

    1984-01-01

    An accurate and precise determination of thorium is proposed. Precision of about 0,1% is required for the determination of macroquantities of thorium when processed. After an extensive literature search concerning this subject, spectrophotometric titration has been chosen, using dissodium ethylenediaminetetraacetate (EDTA) solution and alizarin-S as indicator. In order to obtain such a precision, an amount of 0,025 M EDTA solution precisely measured has been added and the titration was completed with less than 5 ml of 0,0025 M EDTA solution. It is usual to locate the end-point graphically, by plotting added titrant versus absorbance. The non-linear minimum square fit, using the Fletcher e Powell's minimization process and a computer programme. Besides the equivalence point, other parameters of titration were determined: the indicator concentration, the absorbance of the metal-indicator complex, and the stability constants of the metal-indicator and the metal-EDTA complexes. (Author) [pt

  9. Thorium spectrophotometric analysis with high precision

    International Nuclear Information System (INIS)

    Palmieri, H.E.L.

    1983-06-01

    An accurate and precise determination of thorium is proposed. Precision of about 0,1% is required for the determination of macroquantities of thorium processed. After an extensive literature search concerning this subject, spectrophotometric titration has been chosen, using disodium ethylenediaminetetraacetate (EDTA) solution and alizarin S as indicator. In order to obtain such a precision, an amount of 0,025 M EDTA solution precisely measured has been added and the titration was completed with less than 5 ml of 0,0025 M EDTA solution. It is usual to locate the end-point graphically, by plotting added titrant versus absorbance. The non-linear minimum square fit, using the Fletcher e Powell's minimization process and a computer program. (author)

  10. Precision axial translator with high stability.

    Science.gov (United States)

    Bösch, M A

    1979-08-01

    We describe a new type of translator which is inherently stable against torsion and twisting. This concentric translator is also ideally suited for precise axial motion with clearance of the center line.

  11. A comparison of U/Th and rapid-screen 14C dates from Line Island fossil corals

    Science.gov (United States)

    Grothe, Pamela R.; Cobb, Kim M.; Bush, Shari L.; Cheng, Hai; Santos, Guaciara M.; Southon, John R.; Lawrence Edwards, R.; Deocampo, Daniel M.; Sayani, Hussein R.

    2016-03-01

    Time-consuming and expensive radiometric dating techniques limit the number of dates available to construct absolute chronologies for high-resolution paleoclimate reconstructions. A recently developed rapid-screen 14C dating technique reduces sample preparation time and per sample costs by 90%, but its accuracy has not yet been tested on shallow-water corals. In this study, we test the rapid-screen 14C dating technique on shallow-water corals by comparing 44 rapid-screen 14C dates to both high-precision 14C dates and U/Th dates from mid- to late-Holocene fossil corals collected from the central tropical Pacific (2-4°N, 157-160°W). Our results show that 42 rapid-screen 14C and U/Th dates agree within uncertainties, confirming closed-system behavior and ensuring chronological accuracy. However, two samples that grew ˜6500 years ago have calibrated 14C ages ˜1000 years younger than the corresponding U/Th ages, consistent with diagenetic alteration as indicated by the presence of 15-23% calcite. Mass balance calculations confirm that the observed dating discrepancies are consistent with 14C addition and U removal, both of which occur during diagenetic calcite recrystallization. Under the assumption that aragonite-to-calcite replacement is linear through time, we estimate the samples' true ages using the measured 14C and U/Th dates and percent calcite values. Results illustrate that the rapid-screen 14C dates of Holocene-aged fossil corals are accurate for samples with less than 2% calcite. Application of this rapid-screen 14C method to the fossil coral rubble fields from Kiritimati Island reveal significant chronological clustering of fossil coral across the landscape, with older ages farther from the water's edge.

  12. Bepaling van 14C in afvalwater

    NARCIS (Netherlands)

    Hiemstra YS; Kwakman PJM; Nissan LN; Aldenkamp FJ; LSO

    1998-01-01

    In opdracht van de Hoofdinspectie Milieuhygiene van het ministerie van VROM heeft LSO een methode ontwikkeld om 14C in afvalwater van nucleaire installaties te bepalen. De methode meet organisch gebonden-14C en anorganisch-14C in de vorm van carbonaat (14CO32-) in afvalwater. Het rapport

  13. Novel double-isotope technique for enzymatic assay of catecholamines, permitting high precision, sensitivity and plasma sample capacity

    International Nuclear Information System (INIS)

    Brown, M.J.; Jenner, D.A.

    1981-01-01

    A novel use of a double-isotope method is described which allows radioenzymatic assays to combine precision and sensitivity. In the catechol O-methyltransferase assay separate portions of each plasma sample are incubated with either S-[ 3 H]- or S-[ 14 C]-adenosyl-L-methionine. Standards of noradrenaline and adrenaline are added to the latter portions and are thus converted into standards of [ 14 C]metadrenalines. These are added to the 3 H-labelled portions after the incubation, where they function as tracers. The final recovery of 14 C radioactivity corrects for (a) the efficiency of methylation in the plasma sample concerned and (b) the recovery of metadrenalines during the extraction procedures. The 3 H/ 14 C ratio is constant in each assay for a given catecholamine concentration and is determined for samples to which standards of noradrenaline and adrenaline are added to the 3 H- (as well as the 14 C-) labelled portions before the initial incubation. The sensitivity of the assay is increased by using high specific radioactivity S-[ 3 H]adenosyl-L-methionine, and low backgrounds are maintained by catecholamine depletion in vivo in the rats used for enzyme preparation. Both catecholamines (1.5 pg/ml; 10 pmol/l) may be detected; the coefficients of variation are 3.0 and 3.2% for noradrenaline and adrenaline respectively (intra-assay) and 4.6 and 5.0% (inter-assay). (author)

  14. Convenient synthesis of [2-14C]-methylglyoxal bis(guanylhydrazone), [14C]-mitoguazone

    International Nuclear Information System (INIS)

    Burgos, A.; Ellames, G.J.

    1995-01-01

    [2- 14 C]-Methylglyoxal bis(guanylhydrazone) dihydrochloride, [ 14 C]-mitoguazone has been prepared in three steps from potassium[1- 14 C]-acetate in an overall radiochemical yield of 16%. The key steps in this procedure are the formation of the sodium salt of[acetone-2- 14 C]-methylsulfinylacetone, and Pummerer rearrangement to the [ 14 C] labelled hermithioacetal, which is trapped with two equivalents of aminoguanidine to afford the desired [ 14 C]-mitoguazone. (Author)

  15. Laser technology for high precision satellite tracking

    Science.gov (United States)

    Plotkin, H. H.

    1974-01-01

    Fixed and mobile laser ranging stations have been developed to track satellites equipped with retro-reflector arrays. These have operated consistently at data rates of once per second with range precision better than 50 cm, using Q-switched ruby lasers with pulse durations of 20 to 40 nanoseconds. Improvements are being incorporated to improve the precision to 10 cm, and to permit ranging to more distant satellites. These include improved reflector array designs, processing and analysis of the received reflection pulses, and use of sub-nanosecond pulse duration lasers.

  16. Synthesis of 14C-labelled butoxyethoxyethanol

    International Nuclear Information System (INIS)

    Thijssen, J.B.A.; Janssen, C.G.M.; Verluyten, W.L.M.; Heykants, J.J.P.

    1986-01-01

    Butoxyethoxyethanol, an organic solvent used as carrier in the levamisole pour-on formulation, was synthesized via a Makosza etherification of 1- 14 C-labelled bromobutane with mono tetrahydropyranyl (T.H.P.) protected diethylene glycol and subsequent removal of the T.H.P. protecting group. The compounds' synthetic yield was 88.8%; it had a specific activity of 32.5 mCi/mmol. The reaction product was radiochemically pure (99.6%) according to high-performance liquid chromatography and thin-layer chromatography in three solvent systems. (author)

  17. Atmospheric 14C changes resulting from fossil fuel CO2 release and cosmic ray flux variability

    International Nuclear Information System (INIS)

    Stuiver, M.; Quay, P.D.

    1981-01-01

    A high-precision tree-ring record of the atmospheric 14 C levels between 1820 and 1954 is presented. Good agreement is obtained between measured and model calculated 19th and 20th century atmospheric δ 14 C levels when both fossil fuel CO 2 release and predicted natural variations in 14 C production are taken into account. The best fit is obtained by using a box-diffusion model with an oceanic eddy diffusion coefficient of 3 cm 2 /s, a CO 2 atmosphere-ocean gas exchange rate of 21 moles msup(-2) yrsup(-1) and biospheric residence time of 60 years. For trees in the state of Washington the measured 1949-1951 atmospheric δ 14 C level was 20.0 +- 1.2per mille below the 1855-1864 level. Model calculations indicate that in 1950 industrial CO 2 emissions are responsible for at least 85% of the δ 14 C decline, whereas natural variability accounts for the remaining 15%. (orig.)

  18. High-precision positioning of radar scatterers

    NARCIS (Netherlands)

    Dheenathayalan, P.; Small, D.; Schubert, A.; Hanssen, R.F.

    2016-01-01

    Remote sensing radar satellites cover wide areas and provide spatially dense measurements, with millions of scatterers. Knowledge of the precise position of each radar scatterer is essential to identify the corresponding object and interpret the estimated deformation. The absolute position accuracy

  19. Synthesis of [3-14C]- and [phenyl-U-14C] olaquindox

    International Nuclear Information System (INIS)

    Maul, W.; Scherling, D.; Seng, F.

    1981-01-01

    Olaquindox is a new feed additive. [ 14 C]Olaquindox, labelled in different positions, was needed for tracer-studies of pharmacokinetics, biotransformation and residues in several species of animals. 2-[N-(2-hydroxethyl)-carbamoyl]-3-methyl-[3- 14 C]quinoxaline-1,4-dioxide([3- 14 C]Olaquindox) was synthesized from barium[ 14 C]carbonate (22 mmoles; 1.15 Ci) via [1- 14 C]acetic acid, sodium[1- 14 C]acetate, [1- 14 C]acetylchloride, ethyl[3- 14 C]acetoacetate and 2-carbethoxy-3-methyl-[3- 14 C]quinoxaline-1,4-dioxide with an overall yield of 10%, based on barium[ 14 C]carbonate. The radiochemical purity was better than 98% (tlc). The specific activities of three preparations were 10.5, 8.4 and 5.45 μCi/mg respectively. [phenyl-U- 14 C]Olaquindox was synthesized starting from [U- 14 C]aniline (19.8 mmoles; 284.4 mCi). Intermediate products were N-acetyl[U- 14 C]aniline, 2-nitro-N-acetyl[U- 14 C]aniline, 2-nitro[U- 14 C]aniline and [U- 14 C]benzofurazanoxide. The total yield was 50% as calculated for [U- 14 C]aniline. At calibration samples of two preparations showed specific activities of 49.5 and 11.1 μCi/mg respectively. The radiochemical purity was checked by tlc and exceeded 98%. (author)

  20. Changes in solar activity and Holocene climatic shifts derived from 14C wiggle-match dated peat deposits

    NARCIS (Netherlands)

    Mauquoy, Dmitri; Geel, Bas van; Blaauw, Maarten; Speranza, Alessandra; Plicht, Johannes van der

    2004-01-01

    Closely spaced sequences of accelerator mass spectrometer (AMS) 14C dates of peat deposits display century-scale wiggles which can be fitted to the radiocarbon calibration curve. By wiggle-matching such sequences, high-precision calendar age chronologies can be generated which show that changes in

  1. Autocalibration of high precision drift tubes

    International Nuclear Information System (INIS)

    Bacci, C.; Bini, C.; Ciapetti, G.; De Zorzi, G.; Gauzzi, P.; Lacava, F.; Nisati, A.; Pontecorvo, L.; Rosati, S.; Veneziano, S.; Cambiaghi, M.; Casellotti, G.; Conta, C.; Fraternali, M.; Lanza, A.; Livan, M.; Polesello, G.; Rimoldi, A.; Vercesi, V.

    1997-01-01

    We present the results on MDT (monitored drift tubes) autocalibration studies obtained from the analysis of the data collected in Summer 1995 on the H8B Muon Test Beam. In particular we studied the possibility of autocalibration of the MDT using four or three layers of tubes, and we compared the calibration obtained using a precise external tracker with the output of the autocalibration procedure. Results show the feasibility of autocalibration with four and three tubes and the good accuracy of the autocalibration procedure. (orig.)

  2. The bomb 14C transient in the Pacific Ocean

    Science.gov (United States)

    Rodgers, Keith B.; Schrag, Daniel P.; Cane, Mark A.; Naik, Naomi H.

    2000-04-01

    A modeling study of the bomb 14C transient is presented for the Pacific Ocean. A primitive equation ocean circulation model has been configured for a high-resolution domain that accounts for the Indonesian Throughflow (ITF). Four separate runs were performed: (1) seasonal forcing with 20 Sv of ITF transport, (2) seasonal forcing with 10 Sv of ITF transport, (3) seasonal forcing with no ITF transport, and (4) interannual forcing with 15 Sv of ITF transport. This study has two main objectives. First, it is intended to describe the time evolution of the bomb 14C transient. This serves as a tool with which one can identify the physical processes controlling the evolving bomb 14C distribution in the Pacific thermocline and thus provides an interpretive framework for the database of Δ14C measurements in the Pacific. Second, transient tracers are applied to the physical oceanographic problem of intergyre exchange. This is of importance in furthering our understanding of the potential role of the upper Pacific Ocean in climate variability. We use bomb 14C as a dye tracer of intergyre exchange between the subtropical gyres and the equatorial upwelling regions of the equatorial Pacific. Observations show that while the atmospheric Δ14C signal peaked in the early to mid-1960s, the Δ14C levels in the surface water waters of the subtropical gyres peaked near 1970, and the Δ14C of surface waters in the equatorial Pacific continued to rise through the 1980s. It is shown that the model exhibits skill in representing the large-scale observed features observed for the bomb 14C transient in the Pacific Ocean. The model successfully captures the basin-scale inventories of bomb 14C in the tropics as well as in the extratropics of the North Pacific. For the equatorial Pacific this is attributed to the model's high meridional resolution. The discrepancies in the three-dimensional distribution of bomb 14C between the model and data are discussed within the context of the dynamical

  3. Synthesis of pinacolyl [14C]methylphosphonochloridate

    International Nuclear Information System (INIS)

    Horvat, J.; Keglevic, D.; Klaic, B.; Kveder, S.; Ladesic, B.; Cosic, M.; Zupanc, S.

    1982-01-01

    A three-step synthetic route to pinacolyl [ 14 C]methylphosphonochloridate (3) from [ 14 C]methyl iodide is described. Condensation of sodium di-n-butyl phosphite with [ 14 C]methyl iodide gave di-n-butyl [ 14 C]methylphosphonate (1) which was converted into [ 14 C]methylphosphonic dichloride (2) by prolonged refluxing with thionyl chloride. Reaction of 2 with pinacolyl alcohol in the presence of N,N-di-n--propylaniline as the base afforded the title compound 3. The radiochemical yield of redistilled 3 was 34,2% based on 1, and the overall radiochemical yield was 20,0% from [ 14 C]methyl iodide. (author)

  4. Whole body autoradiography with mice using 14C-thymidine

    International Nuclear Information System (INIS)

    Hruby, R. et al

    1982-06-01

    Whole body autoradiography was performed using common histology equipment. Results were useful with some restrictions. 14C-thymidine and/or itsmetabolites were found in those tissues with high rate of mitosis. (Author)

  5. 14C Analysis of protein extracts from Bacillus spores.

    Science.gov (United States)

    Cappuccio, Jenny A; Falso, Miranda J Sarachine; Kashgarian, Michaele; Buchholz, Bruce A

    2014-07-01

    Investigators of bioagent incidents or interdicted materials need validated, independent analytical methods that will allow them to distinguish between recently made bioagent samples versus material drawn from the archives of a historical program. Heterotrophic bacteria convert the carbon in their food sources, growth substrate or culture media, into the biomolecules they need. The F(14)C (fraction modern radiocarbon) of a variety of media, Bacillus spores, and separated proteins from Bacillus spores was measured by accelerator mass spectrometry (AMS). AMS precisely measures F(14)C values of biological materials and has been used to date the synthesis of biomaterials over the bomb pulse era (1955 to present). The F(14)C of Bacillus spores reflects the radiocarbon content of the media in which they were grown. In a survey of commercial media we found that the F(14)C value indicated that carbon sources for the media were alive within about a year of the date of manufacture and generally of terrestrial origin. Hence, bacteria and their products can be dated using their (14)C signature. Bacillus spore samples were generated onsite with defined media and carbon free purification and also obtained from archived material. Using mechanical lysis and a variety of washes with carbon free acids and bases, contaminant carbon was removed from soluble proteins to enable accurate (14)C bomb-pulse dating. Since media is contemporary, (14)C bomb-pulse dating of isolated soluble proteins can be used to distinguish between historical archives of bioagents and those produced from recent media. Copyright © 2014 Elsevier Ireland Ltd. All rights reserved.

  6. Synthesis of (/sup 14/C)Zolpidem

    Energy Technology Data Exchange (ETDEWEB)

    Allen, J.; Tizot, A.

    1986-04-01

    The synthesis of (/sup 14/C)Zolpidem, a new hypnotic agent having a non-benzodiazepine structure, is described. This compound was synthesised in a 64% overall radiochemical yield from potassium (/sup 14/C)cyanide and with a specific radioactivity of 56 mCi/mmol. It was used for pharmacokinetic and drug metabolism studies.

  7. Synthesis of [14C]Zolpidem

    International Nuclear Information System (INIS)

    Allen, J.; Tizot, A.

    1986-01-01

    The synthesis of [ 14 C]Zolpidem, a new hypnotic agent having a non-benzodiazepine structure, is described. This compound was synthesised in a 64% overall radiochemical yield from potassium [ 14 C]cyanide and with a specific radioactivity of 56 mCi/mmol. It was used for pharmacokinetic and drug metabolism studies. (author)

  8. Synthesis of 14C-labelled milrinone

    International Nuclear Information System (INIS)

    Duncan, D.R.; Johnston, D.; Andrews, R.S.

    1985-01-01

    A synthetic procedure for producing 14 C-labelled milrinone, a potent new cardiotonic agent, is described. The synthesis was achieved in two steps from 1-(4-pyridyl)propan-2-one utilising [2- 14 C]cyanoacetamide as the source of the radiolabel. The overall chemical yield was 46% and the radiochemical yield 35%. (author)

  9. Formation of 14C-asparagine from 14C-precursor in mulberry leaves

    International Nuclear Information System (INIS)

    Yamashita, Tadaaki

    1981-01-01

    Since a remarkable accumulation of asparagine in the young leaves of mulberry has been observed, the formation of 14 C-asparagine from 14 C-labeled substrates in young leaves was examined in comparison with that in the mature leaves. 14 C-aspartic acid and 14 C-succinic acid expected as active precursors for asparagine biosynthesis, and 14 C-sucrose as respiratory substrates were fed respectively to the disks of young or mature leaves of mulberry. Although 14 C-succinic acid was actively converted to 14 C-asparagine, no significant amount of 14 C-asparagine was formed from 14 C-aspartic acid in two hours of feeding period. The rate of formation of 14 C-asparagine from 14 C-succinic acid in the mature leaves was slightly higher than that in the young leaves. Amino acids other than asparagine acquired 14 C from 14 C-labeled substrates were mainly aspartic acid, glutamic acid, alanine and ν-amino butyric acid in both of the leaves. Intending to accelerate the formation of asparagine in the leaves, ammonium ion was supplied to culturing solution as only source of nitrogen and plants were grown for two weeks in that solution before 14 C-labeled substrates feeding experiments. Supplying of ammonium ion brought about enhanced accumulation of asparagine in the young leaves, and caused remarkable formation of 14 C-asparagine from 14 C-aspartic acid in both of the leaves. However, the rate of 14 C-asparagine formation from 14 C-aspartic acid in the young leaves did not exceed that in the mature leaves. (author)

  10. Preparation of arginine (guanide 14C)

    International Nuclear Information System (INIS)

    Pichat, L.; Baret, C.

    1960-01-01

    Reaction of anhydrous ammoniac at 800 deg. C on 14 CO 3 Ba gives rise to barium cyanamide 14 C with a yield of about 98 per cent. Addition on H 2 S on cyanamide 14 C leads to thiourea 14 C with a 85 per cent yield, which is quantitatively transformed into S-ethyl-isothiouronium iodide by treatment with methyl iodide. This 14 C-isothiouronium salt is used to introduce 14 C guanide group in α-N-tosyl-ornithine; tosyl group in α-N-tosyl-arginine thus obtained is then removed by hydrolysis with hydrochloric acid. Arginine is separated as flavianic acid salt and is purified on exchange resin Dowex-50. The overall yield based on 14 CO 3 Ba is 25 per cent. (author) [fr

  11. Measurements of in situ produced 14C in terrestrial rocks

    International Nuclear Information System (INIS)

    Yokoyama, Yusuke; Caffee, Marc W.; Southon, John R.; Nishiizumi, Kunihiko

    2004-01-01

    We developed and are testing a system for extracting in situ produced 14 C from quartz. 14 C is liberated from quartz matrix using step-wise heating during which time a spiked carrier gas consisting O 2 -CO-CO 2 -He is flowed through the high-temperature chamber continuously. The total 14 C background is reproducible and typically (2.3 ± 0.2) x 10 6 atoms, and the recovery is consistently greater than 90%. To validate the performance of the system and determine the blank level, we are using quartz samples taken from the Homestake mine (1600 m below the surface), South Dakota. To determine the 14 C release pattern and recovery, we used samples taken from the Transantarctic Mountains, Antarctica

  12. Accelerator mass spectrometry analysis of 14C-oxaliplatin concentrations in biological samples and 14C contents in biological samples and antineoplastic agents

    Science.gov (United States)

    Toyoguchi, Teiko; Kobayashi, Takeshi; Konno, Noboru; Shiraishi, Tadashi; Kato, Kazuhiro; Tokanai, Fuyuki

    2015-10-01

    Accelerator mass spectrometry (AMS) is expected to play an important role in microdose trials. In this study, we measured the 14C concentration in 14C-oxaliplatin-spiked serum, urine and supernatant of fecal homogenate samples in our Yamagata University (YU) - AMS system. The calibration curves of 14C concentration in serum, urine and supernatant of fecal homogenate were linear (the correlation coefficients were ⩾0.9893), and the precision and accuracy was within the acceptance criteria. To examine a 14C content of water in three vacuum blood collection tubes and a syringe were measured. 14C was not detected from water in these devices. The mean 14C content in urine samples of 6 healthy Japanese volunteers was 0.144 dpm/mL, and the intra-day fluctuation of 14C content in urine from a volunteer was little. The antineoplastic agents are administered to the patients in combination. Then, 14C contents of the antineoplastic agents were quantitated. 14C contents were different among 10 antineoplastic agents; 14C contents of paclitaxel injection and docetaxel hydrate injection were higher than those of the other injections. These results indicate that our quantitation method using YU-AMS system is suited for microdosing studies and that measurement of baseline and co-administered drugs might be necessary for the studies in low concentrations.

  13. Accelerator mass spectrometry analysis of "1"4C-oxaliplatin concentrations in biological samples and "1"4C contents in biological samples and antineoplastic agents

    International Nuclear Information System (INIS)

    Toyoguchi, Teiko; Kobayashi, Takeshi; Konno, Noboru; Shiraishi, Tadashi; Kato, Kazuhiro; Tokanai, Fuyuki

    2015-01-01

    Accelerator mass spectrometry (AMS) is expected to play an important role in microdose trials. In this study, we measured the "1"4C concentration in "1"4C-oxaliplatin-spiked serum, urine and supernatant of fecal homogenate samples in our Yamagata University (YU) – AMS system. The calibration curves of "1"4C concentration in serum, urine and supernatant of fecal homogenate were linear (the correlation coefficients were ⩾0.9893), and the precision and accuracy was within the acceptance criteria. To examine a "1"4C content of water in three vacuum blood collection tubes and a syringe were measured. "1"4C was not detected from water in these devices. The mean "1"4C content in urine samples of 6 healthy Japanese volunteers was 0.144 dpm/mL, and the intra-day fluctuation of "1"4C content in urine from a volunteer was little. The antineoplastic agents are administered to the patients in combination. Then, "1"4C contents of the antineoplastic agents were quantitated. "1"4C contents were different among 10 antineoplastic agents; "1"4C contents of paclitaxel injection and docetaxel hydrate injection were higher than those of the other injections. These results indicate that our quantitation method using YU-AMS system is suited for microdosing studies and that measurement of baseline and co-administered drugs might be necessary for the studies in low concentrations.

  14. Accelerator mass spectrometry analysis of {sup 14}C-oxaliplatin concentrations in biological samples and {sup 14}C contents in biological samples and antineoplastic agents

    Energy Technology Data Exchange (ETDEWEB)

    Toyoguchi, Teiko, E-mail: tteiko@med.id.yamagata-u.ac.jp [Department of Pharmacy, Yamagata University Hospital, 2-2-2 Iida-Nishi, Yamagata-shi, Yamagata 990-9585 (Japan); Kobayashi, Takeshi; Konno, Noboru; Shiraishi, Tadashi [Department of Pharmacy, Yamagata University Hospital, 2-2-2 Iida-Nishi, Yamagata-shi, Yamagata 990-9585 (Japan); Kato, Kazuhiro; Tokanai, Fuyuki [Department of Physics, Faculty of Science, Yamagata University, 1-4-12 Kojirakawa-machi, Yamagata-shi, Yamagata 990-8560 (Japan)

    2015-10-15

    Accelerator mass spectrometry (AMS) is expected to play an important role in microdose trials. In this study, we measured the {sup 14}C concentration in {sup 14}C-oxaliplatin-spiked serum, urine and supernatant of fecal homogenate samples in our Yamagata University (YU) – AMS system. The calibration curves of {sup 14}C concentration in serum, urine and supernatant of fecal homogenate were linear (the correlation coefficients were ⩾0.9893), and the precision and accuracy was within the acceptance criteria. To examine a {sup 14}C content of water in three vacuum blood collection tubes and a syringe were measured. {sup 14}C was not detected from water in these devices. The mean {sup 14}C content in urine samples of 6 healthy Japanese volunteers was 0.144 dpm/mL, and the intra-day fluctuation of {sup 14}C content in urine from a volunteer was little. The antineoplastic agents are administered to the patients in combination. Then, {sup 14}C contents of the antineoplastic agents were quantitated. {sup 14}C contents were different among 10 antineoplastic agents; {sup 14}C contents of paclitaxel injection and docetaxel hydrate injection were higher than those of the other injections. These results indicate that our quantitation method using YU-AMS system is suited for microdosing studies and that measurement of baseline and co-administered drugs might be necessary for the studies in low concentrations.

  15. High precision target center determination from a point cloud

    Directory of Open Access Journals (Sweden)

    K. Kregar

    2013-10-01

    Full Text Available Many applications of terrestrial laser scanners (TLS require the determination of a specific point from a point cloud. In this paper procedure of high precision planar target center acquisition from point cloud is presented. The process is based on an image matching algorithm but before we can deal with raster image to fit a target on it, we need to properly determine the best fitting plane and project points on it. The main emphasis of this paper is in the precision estimation and propagation through the whole procedure which allows us to obtain precision assessment of final results (target center coordinates. Theoretic precision estimations – obtained through the procedure were rather high so we compared them with the empiric precision estimations obtained as standard deviations of results of 60 independently scanned targets. An χ2-test confirmed that theoretic precisions are overestimated. The problem most probably lies in the overestimated precisions of the plane parameters due to vast redundancy of points. However, empirical precisions also confirmed that the proposed procedure can ensure a submillimeter precision level. The algorithm can automatically detect grossly erroneous results to some extent. It can operate when the incidence angles of a laser beam are as high as 80°, which is desirable property if one is going to use planar targets as tie points in scan registration. The proposed algorithm will also contribute to improve TLS calibration procedures.

  16. AMS 14C measurements for tree-ring samples from Japanese woods from 4c AD to 8c AD

    International Nuclear Information System (INIS)

    Ozaki, Hiromasa; Sakamoto, Minoru; Imamura, Mineo; Mitsutani, Takumi

    2010-01-01

    Regional offsets of atmospheric 14 C concentration, as represented by differences from IntCal calibration datasets, are discussed at times in relation to universal use of international radiocarbon calibration curve. In the construction of IntCal, 14 C contents of contemporaneous tree-ring samples from different regions in the northern hemisphere have been used, because the regional differences were indistinguishable from errors of measurements. Nowadays, high-precision 14 C results can be obtained much more easily than before, so more attention should be paid to the possible regional offsets. Most parts of IntCal has been constructed by using 14 C contents of tree-ring samples from woods in high latitude of Europe and North America, which are farthest from Japan in the northern hemisphere. So far, we have measured 14 C contents of tree-ring samples from Japanese wood samples dendrochronologically dated from 11th century BC to 4th century AD in order to investigate regional offset in Japan. Although the obtained results agreed well with IntCal in general, there were some periods when the 14 C contents differ significantly from IntCal. In this paper, we report the new results of AMS 14 C measurement for Japanese tree-ring samples ranging from 4th century AD to 8th century AD. The results show a significant disagreement with IntCal at around 630 AD. Similar difference was indicated by 14 C contents of tree-ring samples from other Japanese woods (Imamura et al., 2007). So it is certain that the regional offset in Japan exists at around 630 AD. (author)

  17. 14C concentrations in tree stems, 1

    International Nuclear Information System (INIS)

    Kikata, Yoji; Yonenobu, Hitoshi; Morishita, Fumio; Hattori, Yoshiaki; Marsoen, S.N.

    1993-01-01

    The 14 C concentrations in trees sampled at various latitudes were measured with a Tandetron Accelerator Mass Spectrometer at Nagoya University. The growing periods of the parts for 14 C measurements were estimated by the relationship between meteorological conditions and the appearance of anatomical features of annual rings such as false rings, latewood formation, and so on. The following results were obtained: 1. The latitude dependence of the 14 C variation is found in tree stems as well as in the atmosphere. 2. The 14 C concentrations in tree stems are almost equal to those in the atmosphere at the latitude where the tree had grown and at the time when the sampled section is formed. Therefore the 14 C concentrations in the atmosphere are estimated by those of the tree stems. 3. The time when the 14 C concentration in the tree showed its maximum value has difference of 1 - 2 years with that of the latitude where the tree had grown. 4. This phenomena seemed to be related closely with the mechanism of global mixing of 14 CO 2 produced by atmospheric nuclear weapon tests. This mechanism causes a time lag of 14 C variation between northern and southern hemisphere. (author)

  18. Quantitation of 14C-oxaliplatin concentrations in human serum samples by using accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Kobayashi, Takeshi; Toyoguchi, Teiko; Kato, Kazuhiro; Tokanai, Fuyuki; Shiraishi, Tadashi

    2013-01-01

    The understanding of human pharmacokinetics is important for development of new drugs. Microdosing studies have been proposed as means of obtaining human pharmacokinetics information at early stages of drug development. Accelerator mass spectrometry (AMS) has high detection sensitivity and is expected to play an important role in microdose trials. In this study, we used the AMS microdosing facility at Yamagata University to measure the concentration of 14 C in 14 C-oxaliplatin-spiked serum samples. The calibration curve of 14 C concentration in serum was linear, and the correlation coefficient was 0.9994. The precision, accuracy, and stability values obtained (freeze and thaw cycles, and short- and long-term stability) satisfied the criteria. The mean background 14 C concentrations in samples of 6 healthy Japanese volunteers were 1.635dpm/mL in blood and 0.56dpm/mL in plasma. These results suggest the suitability of AMS-based quantitation for analyzing samples from microdosing studies. (author)

  19. AMS-14C analysis of modern teeth: A comparison between two sample preparation techniques

    Science.gov (United States)

    Solis, C.; Solis-Meza, E.; Morales, M. E.; Rodriguez-Ceja, M.; Martínez-Carrillo, M. A.; Garcia-Calderon, D.; Huerta, A.; Chávez, E.

    2017-09-01

    AMS-14C analysis of modern teeth has become important for forensic studies. 14C content in human teeth reflects the 14C atmospheric concentration during its formation and allows the calculation of the actual year of birth. Through AMS, it is possible to measure the 14C concentrations in a tissue with high precision. However, there is a debate about which should be the best fraction for teeth carbon dating: collagen or enamel. This work focuses on the results obtained from enamel and collagen extracted from Mexican people in order to compare them. Collagen from dental pieces donated from people older than 60-years-old have been included to understand the turnover process and usefulness of collagen to determine the date of birth. Our results indicate that when a single dental piece is available, enamel method allows the determination of the tooth formation date. Dating collagen of the same tooth helps to discriminate if the formation date belongs to the left or the right side of the peak bomb, but also corroborates, the ages obtained through enamel analysis.

  20. Active vibration isolation of high precision machines

    CERN Document Server

    Collette, C; Artoos, K; Hauviller, C

    2010-01-01

    This paper provides a review of active control strategies used to isolate high precisionmachines (e.g. telescopes, particle colliders, interferometers, lithography machines or atomic force microscopes) from external disturbances. The objective of this review is to provide tools to develop the best strategy for a given application. Firstly, the main strategies are presented and compared, using single degree of freedom models. Secondly, the case of huge structures constituted of a large number of elements, like particle colliders or segmented telescopes, is considered.

  1. The study of high precision neutron moisture gauge

    International Nuclear Information System (INIS)

    Liu Shengkang; Bao Guanxiong; Sang Hai; Zhu Yuzhen

    1993-01-01

    The principle, structure and calibration experiment of the high precision neutron moisture gauge (insertion type) are described. The gauge has been appraised. The precision of the measuring moisture of coke is lower than 0.5%, and the range of the measuring moisture is 2%-12%. The economic benefit of the gauge application is good

  2. Evidence of 11-year solar cycles in tree rings from 1010 to 1110 AD - Progress on high precision AMS measurements

    Energy Technology Data Exchange (ETDEWEB)

    Guettler, D., E-mail: guettler@phys.ethz.ch [Laboratory of Ion Beam Physics, ETH Zurich, HPK G31, Schafmattstrasse 20, 8093 Zurich (Switzerland); Wacker, L. [Laboratory of Ion Beam Physics, ETH Zurich, HPK G31, Schafmattstrasse 20, 8093 Zurich (Switzerland); Kromer, B.; Friedrich, M. [Heidelberg Academy of Sciences, 69120 Heidelberg (Germany); Institute of Botany, University of Hohenheim, 70593 Stuttgart (Germany); Synal, H.-A. [Laboratory of Ion Beam Physics, ETH Zurich, HPK G31, Schafmattstrasse 20, 8093 Zurich (Switzerland)

    2013-01-15

    Oak tree rings from Southern Germany covering the AD 1010-1110 years have been analyzed for radiocarbon with accelerator mass spectrometry (AMS) at the laboratory at ETH Zurich. High-precision measurements with a precision down to 12 years radiocarbon age and a time resolution of 2 years aimed to identify modulations of the {sup 14}C concentration in tree ring samples caused by the 11 years solar cycles, a feature that so far is not visible in the IntCal calibration curve. Our results are in good agreement with the current calibration curve IntCal09. However, we observed an offset in radiocarbon age of 25-40 years towards older values. An evaluation of our sample preparation, that included variations of e.g.: chemicals, test glasses and processing steps did not explain this offset. The numerous measurements using the AMS-MICADAS system validated its suitability for high precision measurements with high repeatability.

  3. 14C levels in Trombay environment

    International Nuclear Information System (INIS)

    Doshi, G.R.; Sadarangani, S.H.; Krishnamoorthy, T.M.

    1994-01-01

    The passive air sampling method has been used to measure the spatial distribution of the specific activity of 14 C in air samples collected within the Trombay complex. The samples collected within radial distance of about 0.5 km from Cirus showed 3 to 5 times higher specific activity of 14 C over the natural background level of 6.2 pCi/g C. The same decreased with the distance and approached the value of natural level at the site boundary (1.6 km). The specific activity of 14 C in leaf samples collected within the complex showed the similar pattern. (author). 6 refs., 2 tabs

  4. Biodegradation mechanism of linear alkylbenzenesulfonate-14C

    International Nuclear Information System (INIS)

    Kubodera, Tadayoshi; Muto, Toshio; Yamamoto, Tatsuo

    1978-01-01

    The biodegradation of linear alkylbenzenesulfonate- 14 C (LAS- 14 C) tagged with 14 C at the linear side chain was studied on activated sludge by tracer method in addition to the methylene blue method which is widely employed in the biodegradation of LAS. It was found that there were three periods of rapid adsorption period, acclimation period, and degradation process. The radiolysis of dodecylbenzenesulfonate was studied on irradiating by 5000 Ci 60 Co source. The decomposition products were identified by GLC and GC-MS spectrometry after desulfonation. 1-Tetralone, 1-indanone, 4-methyl-1-tetralone, naphthalene et al. were found in them. (author)

  5. {sup 14}C AMS dating Yongcheon cave

    Energy Technology Data Exchange (ETDEWEB)

    Lee, J.H., E-mail: jefflee@snu.ac.kr [AMS Lab., NCIRF, Seoul National University, Seoul 151-742 (Korea, Republic of); Choe, K. [AMS Lab., NCIRF, Seoul National University, Seoul 151-742 (Korea, Republic of); Kim, J.C. [Dept. of Physics and Astronomy, Seoul National University, Seoul 151-742 (Korea, Republic of); Choi, S.H.; Kang, J.; Song, S.; Song, Y.M. [AMS Lab., NCIRF, Seoul National University, Seoul 151-742 (Korea, Republic of); Jang, J.G. [Jeju National Museum, Jeju 690-782 (Korea, Republic of)

    2013-01-15

    The biggest island in South Korea is Jeju Island, which lies 80 km south of the mainland and has one shield volcano, Mt. Halla. The volcanic island and its lava tubes were added to the world heritage list by UNESCO in 2007. Among the many lava tubes on the island, a unique cave had been accidentally found in 2005 while some workers were replacing a telephone pole. Until the discovery, it had been completely isolated from the outside by naturally-built sand blocks. Yongcheon cave is a lime-decorated lava tube showing both the properties of a volcanic lava tube and a limestone cave. This cave, about 3 km in length, is acknowledged to be the best of this type in the world and includes a large clean-water lake, lava falls, and richly developed speleothems inside it. Even though there is archaeological evidence from well preserved pottery that ancient people entered this place, the preservation of artifacts was ensured by a geological change that made later entrance difficult. We have collected charcoal samples scattered around the cave and dated them using AMS. Ages were in the range of ca. 1570-1260 BP (A.D. 340-880) and this corresponds to the Ancient Three Kingdoms and the Unified Silla era in Korean history. The {sup 14}C AMS measurement results presented in this paper on wood charcoal provide precise dates which will be very useful not only to clarify the nature of human activities in this cave but also to provide reference dates when comparing other dating methods.

  6. 14C AMS dating Yongcheon cave

    International Nuclear Information System (INIS)

    Lee, J.H.; Choe, K.; Kim, J.C.; Choi, S.H.; Kang, J.; Song, S.; Song, Y.M.; Jang, J.G.

    2013-01-01

    The biggest island in South Korea is Jeju Island, which lies 80 km south of the mainland and has one shield volcano, Mt. Halla. The volcanic island and its lava tubes were added to the world heritage list by UNESCO in 2007. Among the many lava tubes on the island, a unique cave had been accidentally found in 2005 while some workers were replacing a telephone pole. Until the discovery, it had been completely isolated from the outside by naturally-built sand blocks. Yongcheon cave is a lime-decorated lava tube showing both the properties of a volcanic lava tube and a limestone cave. This cave, about 3 km in length, is acknowledged to be the best of this type in the world and includes a large clean-water lake, lava falls, and richly developed speleothems inside it. Even though there is archaeological evidence from well preserved pottery that ancient people entered this place, the preservation of artifacts was ensured by a geological change that made later entrance difficult. We have collected charcoal samples scattered around the cave and dated them using AMS. Ages were in the range of ca. 1570-1260 BP (A.D. 340–880) and this corresponds to the Ancient Three Kingdoms and the Unified Silla era in Korean history. The 14 C AMS measurement results presented in this paper on wood charcoal provide precise dates which will be very useful not only to clarify the nature of human activities in this cave but also to provide reference dates when comparing other dating methods.

  7. High-precision gauging of metal rings

    Science.gov (United States)

    Carlin, Mats; Lillekjendlie, Bjorn

    1994-11-01

    Raufoss AS designs and produces air brake fittings for trucks and buses on the international market. One of the critical components in the fittings is a small, circular metal ring, which is going through 100% dimension control. This article describes a low-price, high accuracy solution developed at SINTEF Instrumentation based on image metrology and a subpixel resolution algorithm. The measurement system consists of a PC-plugg-in transputer video board, a CCD camera, telecentric optics and a machine vision strobe. We describe the measurement technique in some detail, as well as the robust statistical techniques found to be essential in the real life environment.

  8. Precision probes of QCD at high energies

    Science.gov (United States)

    Alioli, Simone; Farina, Marco; Pappadopulo, Duccio; Ruderman, Joshua T.

    2017-07-01

    New physics, that is too heavy to be produced directly, can leave measurable imprints on the tails of kinematic distributions at the LHC. We use energetic QCD processes to perform novel measurements of the Standard Model (SM) Effective Field Theory. We show that the dijet invariant mass spectrum, and the inclusive jet transverse momentum spectrum, are sensitive to a dimension 6 operator that modifies the gluon propagator at high energies. The dominant effect is constructive or destructive interference with SM jet production. We compare differential next-to-leading order predictions from POWHEG to public 7 TeV jet data, including scale, PDF, and experimental uncertainties and their respective correlations. We constrain a New Physics (NP) scale of 3.5 TeV with current data. We project the reach of future 13 and 100 TeV measurements, which we estimate to be sensitive to NP scales of 8 and 60 TeV, respectively. As an application, we apply our bounds to constrain heavy vector octet colorons that couple to the QCD current. We project that effective operators will surpass bump hunts, in terms of coloron mass reach, even for sequential couplings.

  9. [14C]Virginiamycin residues in eggs

    International Nuclear Information System (INIS)

    Corpet, D.E.; Baradat, M.; Bories, G.F.

    1988-01-01

    Laying hens were fed ab libitum a diet supplemented at 40, 10, and 0 mg/kg with [ 14 C]virginiamycin, to determine whether or not virginamycin or its metabolites were transferred to the eggs. About 0.05% of the ingested 14 C dose was recovered in the eggs. Radiolabeled residues expressed in terms of virginiamycin equivalents were found to be 5.1 ng/g in the albumen and 31.8 ng/g in the yolk from hens fed a 10 mg/kg diet. No antibiotic activity could be detected in the eggs. Tentative identifications showed that in the albumen about 17% of the 14 C behaved chromatographically like virginiamycin and 18% was associated to the ovalbumin. In the yolk 31% of the 14 C was associated to proteins, 58% to fatty acids, and 4% to unsaponifiable matter

  10. Syntheses of [6-14C] and [5-carboxy, 6-14C2]nitrendipine

    International Nuclear Information System (INIS)

    Maul, N.; Scherling, D.

    1989-01-01

    [6- 14 C]Nitrendipine synthesis started from barium[ 14 ]carbonate, which was converted to [1- 14 C]acetyl chloride. The acid chloride was condensed with Meldrum's acid (2,2-dimethyl-1,3-dioxane-4,6-dione). The resulting intermediate was treated with boiling methanol to give methyl [3- 14 C]acetoacetate. The reaction with gaseous ammonia in toluene yielded the corresponding methyl 3-amino[3- 14 C]crotonate which was condensed with ethyl 2-(3-nitro-benzylidene) acetoacetate to obtain [6- 14 C]nitrendipine. (author)

  11. Syntheses of (6- sup 14 C) and (5-carboxy, 6- sup 14 C sub 2 )nitrendipine

    Energy Technology Data Exchange (ETDEWEB)

    Maul, N.; Scherling, D. (Bayer AG, Wuppertal (Germany, F.R.). Inst. fuer Pharmakologie)

    1989-04-01

    (6-{sup 14}C)Nitrendipine synthesis started from barium({sup 14})carbonate, which was converted to (1-{sup 14}C)acetyl chloride. The acid chloride was condensed with Meldrum's acid (2,2-dimethyl-1,3-dioxane-4,6-dione). The resulting intermediate was treated with boiling methanol to give methyl (3-{sup 14}C)acetoacetate. The reaction with gaseous ammonia in toluene yielded the corresponding methyl 3-amino(3-{sup 14}C)crotonate which was condensed with ethyl 2-(3-nitro-benzylidene) acetoacetate to obtain (6-{sup 14}C)nitrendipine. (author).

  12. Uptake and distribution of 14C during and following exposure to [14C]methyl isocyanate

    International Nuclear Information System (INIS)

    Ferguson, J.S.; Kennedy, A.L.; Stock, M.F.; Brown, W.E.; Alarie, Y.

    1988-01-01

    Guinea pigs were exposed to [ 14 C]methyl isocyanate ( 14 CH 3 -NCO, 14 C MIC) for periods of 1 to 6 hr at concentrations of 0.5 to 15 ppm. Arterial blood samples taken during exposure revealed immediate and rapid uptake of 14 C. Clearance of 14 C was then gradual over a period of 3 days. Similarly 14 C was present in urine and bile immediately following exposure, and clearance paralleled that observed in blood. Guinea pigs fitted with a tracheal cannula and exposed while under anesthesia showed a reduced 14 C uptake in blood indicating that most of the 14 C MIC uptake in normal guinea pigs occurred from retention of this agent in the upper respiratory tract passages. In exposed guinea pigs 14 C was distributed to all examined tissues. In pregnant female mice similarly exposed to 14 C MIC, 14 C was observed in all tissues examined following exposure including the uterus, placenta, and fetus. While the form of 14 C distributed in blood and tissues has not yet been identified, these findings may help to explain the toxicity of MIC or MIC reaction products on organs other than the respiratory tract, as noted by several investigators

  13. System and method for high precision isotope ratio destructive analysis

    Science.gov (United States)

    Bushaw, Bruce A; Anheier, Norman C; Phillips, Jon R

    2013-07-02

    A system and process are disclosed that provide high accuracy and high precision destructive analysis measurements for isotope ratio determination of relative isotope abundance distributions in liquids, solids, and particulate samples. The invention utilizes a collinear probe beam to interrogate a laser ablated plume. This invention provides enhanced single-shot detection sensitivity approaching the femtogram range, and isotope ratios that can be determined at approximately 1% or better precision and accuracy (relative standard deviation).

  14. An improved synthesis of 14C labelled glycerol using sodium borohydride

    International Nuclear Information System (INIS)

    Chander, H.; Ramamurthy, T.V.; Viswanathan, K.V.

    1987-01-01

    [1- 14 C]Glyceric acid has been reduced to [1(3)- 14 C]glycerol in high yields via the methyl ester of [1- 14 C]glyceric acid by sodium borohydride in the presence of t-butyl alcohol and methanol. The importance of the procedure is highlighted in relation to other procedures involving lithium aluminium hydride reduction. (author)

  15. Radioactive waste with 14C in Argentina

    International Nuclear Information System (INIS)

    Di Lello, D.S.

    2009-01-01

    14 C is a long half-life radioisotope, which is present in radioactive waste generated during the operation and decommissioning of nuclear power plants. 14 C can also be found in waste generated by medical diagnostic laboratories or any one generated by fields that deal with research and development (mainly connected with the biochemists area). According to international precedents the disposal of 14 C based on the final amount found in radioactive waste and its chemical form have conditioned the design and operation of the facilities (either because of the amount of it or the chemical form in which 14 C was present). We have to take into account that the design of facilities for radioactive waste disposal is included among the obligations of the National Radioactive Waste Management Program (PNGRR). It is absolutely necessary to count with enough information about the characteristics of any waste containing 14 C that is generated in Argentina, in order to be able to fulfil the requirements previously mentioned. The main characteristics of interest in the frame of the present project are: a) the principal reactions that take place for the formation of 14 C; b) The specific concentration of activity in materials where this radio nuclei is formed or is accumulated; c) To know which is the current step in the process of managing these wastes (in Argentina and all over the world). Either if it refers to bulk or conditioned storage, inside the generating facility; d) Transportation possibilities of 14 C under these conditions; e) The accumulated volume and the generation rate of this kind of waste in Argentina. This paper presents an initial collection and evaluation of the information related to the characteristics already mentioned, having gathered published material from the literature and information in the PNGRR up to this moment. The description of the characteristics of the radioactive waste containing 14 C from nuclear power plants, hospitals and research and

  16. Placental transfer of 14C-hexoprenaline

    International Nuclear Information System (INIS)

    Lipshitz, J.; Broyles, K.; Whybrew, W.D.; Ahokas, R.A.; Anderson, G.D.

    1982-01-01

    The placental transfer of a single intravenous injection of 14 C-hexoprenaline was studied in eight pregnant New Zealand white rabbits. Maternal and fetal blood was sampled intermittently for 60 minutes after the injection. An initial rapid decrease in the levels of 14 C-hexoprenaline in maternal blood was followed by a second slower phase, whereas fetal heart rate after the administration of a single maternal intravenous injection of hexoprenaline in the treatment of fetal distress is due to the action on the uterus and/or on maternal cardiovascular function, and not to direct stimulation of the fetus

  17. Organic compounds preparation with 14 C

    International Nuclear Information System (INIS)

    Shirvani, Gholam Hossein.

    1996-09-01

    Active urea is a basic reagent for the synthesis of active uric-8- 14 C acid. In our manner, activated Barium carbonate with specified activity was placed in a special furnace with ability of passing gases. Then, ammonia gas was passed through it at about 850 Degree C to obtain Barium Cyanamide. Reaction of the produced compound with CO 2 , and then acidification of the mixture, gave activated urea. Condensation of the urea with Ethylcyanoacetate, produce 6-Aminouracil which upon nitrosation, reduction and then condensation with urea, the desired Uric-8- 14 C acid was synthesized. (author). 148 refs.,

  18. Synthesis of 14C-labeled stepholidine

    International Nuclear Information System (INIS)

    Yang Liu; Zhang Xin

    1988-01-01

    L-Tetrahydroprotoberberine (THPB) alkaloids are dopamine-receptor antagonists. Stepholidine has been shown to possess the strongest pharmacological effects among the THPB alkaloids studied. In order to study its metabolism and the mode of action of the drug, a radiolabeled stepholidine was required. We report here the synthesis of 14 C-labeled stepholidine by Mannich condensation of 7-benzyloxy-1-(4-benzyloxy-3-hydroxy-benzyl)-6-methoxy-1,2,3,4-tetrahydroisoquinoline with ( 14 C)formaldehyde followed by methylation and debensylation in 32% radiochemical yield. (author)

  19. Analysis of Δ14C variations in atmosphere

    International Nuclear Information System (INIS)

    Simon, J.; Sivo, A.; Richtarikova, M.; Holy, K.; Polaskova, A.; Bulko, M.; Hola, O.

    2005-01-01

    The Δ 14 C in the atmosphere have been measured and studied in two localities of Slovakia. The accomplished analysis proved the existence of the annual variations of the Δ 14 C with the attenuating amplitude and decreasing mean value. It seems to be logical and physically correct to describe the Δ 14 C time-dependence by the equation: y = Ae -at + Be -bt cos(ω 1 t + (φ)). The coefficients A, a, B, b, (φ) are listed in the table for both the localities. The observed variations of the Δ 14 C have a maximum in summer and minimum in winter .Probably it is caused by the higher requirement of the heat supply in winter season which is connected directly with the fossil CO 2 emissions and more intensive Suess effect. Summer maximum could be explained by the combination of the lower CO 2 emission rate and higher turbulent transport of the stratospheric 14 C to the troposphere. Using the Fourier harmonic analysis the amplitude spectra of the average annual variations were plotted. The obtained result shows that the variations have the high degree of symmetry. Furthermore, the obtained basic frequency ω 1 = 2π/12 [month -1 ] proves that the cyclic processes with the period of T = 12 [month] have a major influence on the 14 C amount in the troposphere. The presence of some higher-order harmonics is significant, but a physical interpretation has not yet been clear. In addition to the main frequency there are presented also 2ω 1 and 3ω 1 in Bratislava and 4ω 1 in Zlkovce data-set. The long-time average of the Δ 14 C in Zlkovce during years 1995-2004 is higher of about 6.6 o / oo than in Bratislava. It represents an unique evidence that the local CO 2 pollution affects the 14 C activity . The correlation on the level R 2 = 0,43 was found between Bratislava and Zlkovce atmospheric Δ 14 C data. (authors)

  20. Monitoring of the 14C activity in the atmosphere

    International Nuclear Information System (INIS)

    Svingor, E.; Molnar, M.; Futo, I.; Rinyu, L.

    2006-01-01

    Complete text of publication follows. The distribution of atmospheric radiocarbon has been extensively investigated both in the Northern and Southern Hemisphere as well as in the Tropics for a number of decades. Systematic global observations of 14 CO 2 in the troposphere were made during and after atmospheric nuclear weapon tests in the 1950s and 1960s by several laboratories. Nowadays the monitoring of 14 C in regions adjacent to nuclear power plants (NPP) or sites of land-filled radioactive wastes has growing importance in determining the frequency and activity of anthropogenic 14 C released to the environment. On the other hand, the depletion of 14 C in the atmosphere gives information about the regional fossil fuel CO 2 contributions (Figure 1., Prague-Bulovka). The 14 C activity of the atmosphere has been monitored in the vicinity of Paks NPP by sampling environmental air monthly since 1994. Four differential sampling units collect air samples less than 2 km away from the 100- m-high stacks of Paks NPP (A-type stations), and for reference a sampler is operated at a station (B24) ca. 30 km away from Paks NPP. The highest 14 C values were measured at the site located less than 1km away from Paks NPP. The influence of the 14 C discharge in the environment decreases rapidly with the distance from the source and under normal operating conditions the effect of Paks NPP is negligible at a distance of 2.5km. In Figure 1. we have compared our data for Paks NPP measured during the time span of 2000 - 2005 with data from different European monitoring stations. (The 14 C activities are given in Δ values: Δ 14 C(% (A sample /A standard -1) x 1000.) In 2000-2001 the excess 14 C at Paks NPP compared to the B24 was 5-10 (per mille) but its Δ value didn't exceed the tropospheric background (1). With the growing traffic the inactive CO 2 emission (Suess effect) exceeded the influence of the NPP (2). After a cleaning tank incident at unit 2 of Paks NPP in April 2003 a 5

  1. High precision 3D coordinates location technology for pellet

    International Nuclear Information System (INIS)

    Fan Yong; Zhang Jiacheng; Zhou Jingbin; Tang Jun; Xiao Decheng; Wang Chuanke; Dong Jianjun

    2010-01-01

    In inertial confinement fusion (ICF) system, manual way has been used to collimate the pellet traditionally, which is time-consuming and low-level automated. A new method based on Binocular Vision is proposed, which can place the prospecting apparatus on the public diagnosis platform to reach relevant engineering target and uses the high precision two dimension calibration board. Iterative method is adopted to satisfy 0.1 pixel for corner extraction precision. Furthermore, SVD decomposition is used to remove the singularity corners and advanced Zhang's calibration method is applied to promote camera calibration precision. Experiments indicate that the RMS of three dimension coordinate measurement precision is 25 μm, and the max system RMS of distance measurement is better than 100 μm, satisfying the system index requirement. (authors)

  2. High-precision thermal and electrical characterization of thermoelectric modules

    Science.gov (United States)

    Kolodner, Paul

    2014-05-01

    This paper describes an apparatus for performing high-precision electrical and thermal characterization of thermoelectric modules (TEMs). The apparatus is calibrated for operation between 20 °C and 80 °C and is normally used for measurements of heat currents in the range 0-10 W. Precision thermometry based on miniature thermistor probes enables an absolute temperature accuracy of better than 0.010 °C. The use of vacuum isolation, thermal guarding, and radiation shielding, augmented by a careful accounting of stray heat leaks and uncertainties, allows the heat current through the TEM under test to be determined with a precision of a few mW. The fractional precision of all measured parameters is approximately 0.1%.

  3. Quality of Graphite Target for Biological/Biomedical/Environmental Applications of 14C-Accelerator Mass Spectrometry

    Science.gov (United States)

    2010-01-01

    Catalytic graphitization for 14C-accelerator mass spectrometry (14C-AMS) produced various forms of elemental carbon. Our high-throughput Zn reduction method (C/Fe = 1:5, 500 °C, 3 h) produced the AMS target of graphite-coated iron powder (GCIP), a mix of nongraphitic carbon and Fe3C. Crystallinity of the AMS targets of GCIP (nongraphitic carbon) was increased to turbostratic carbon by raising the C/Fe ratio from 1:5 to 1:1 and the graphitization temperature from 500 to 585 °C. The AMS target of GCIP containing turbostratic carbon had a large isotopic fractionation and a low AMS ion current. The AMS target of GCIP containing turbostratic carbon also yielded less accurate/precise 14C-AMS measurements because of the lower graphitization yield and lower thermal conductivity that were caused by the higher C/Fe ratio of 1:1. On the other hand, the AMS target of GCIP containing nongraphitic carbon had higher graphitization yield and better thermal conductivity over the AMS target of GCIP containing turbostratic carbon due to optimal surface area provided by the iron powder. Finally, graphitization yield and thermal conductivity were stronger determinants (over graphite crystallinity) for accurate/precise/high-throughput biological, biomedical, and environmental14C-AMS applications such as absorption, distribution, metabolism, elimination (ADME), and physiologically based pharmacokinetics (PBPK) of nutrients, drugs, phytochemicals, and environmental chemicals. PMID:20163100

  4. High-precision performance testing of the LHC power converters

    CERN Document Server

    Bastos, M; Dreesen, P; Fernqvist, G; Fournier, O; Hudson, G

    2007-01-01

    The magnet power converters for LHC were procured in three parts, power part, current transducers and control electronics, to enable a maximum of industrial participation in the manufacturing and still guarantee the very high precision (a few parts in 10-6) required by LHC. One consequence of this approach was several stages of system tests: factory reception tests, CERN reception tests, integration tests , short-circuit tests and commissioning on the final load in the LHC tunnel. The majority of the power converters for LHC have now been delivered, integrated into complete converter and high-precision performance testing is well advanced. This paper presents the techniques used for high-precision testing and the results obtained.

  5. High current precision long pulse electron beam position monitor

    CERN Document Server

    Nelson, S D; Fessenden, T J; Holmes, C

    2000-01-01

    Precision high current long pulse electron beam position monitoring has typically experienced problems with high Q sensors, sensors damped to the point of lack of precision, or sensors that interact substantially with any beam halo thus obscuring the desired signal. As part of the effort to develop a multi-axis electron beam transport system using transverse electromagnetic stripline kicker technology, it is necessary to precisely determine the position and extent of long high energy beams for accurate beam position control (6 - 40 MeV, 1 - 4 kA, 2 μs beam pulse, sub millimeter beam position accuracy.) The kicker positioning system utilizes shot-to-shot adjustments for reduction of relatively slow (< 20 MHz) motion of the beam centroid. The electron beams passing through the diagnostic systems have the potential for large halo effects that tend to corrupt position measurements.

  6. 14C tebuconazole degradation in Colombian soils.

    Science.gov (United States)

    Mosquera, C S; Martínez, M J; Guerrero, J A

    2010-01-01

    Tebuconazole is a fungicide used on onion crops (Allium Fistulosum L) in Colombia. Persistence of pesticides in soils is characterized by the half-life (DT50), which is influenced by their chemical structure, the physical and chemical properties of the soil and the previous soil history. Based on its structural and chemical properties, tebuconazole should be expected to be relatively persistent in soils. Laboratory incubation studies were conducted to evaluate persistence and bond residues of 14C tebuconazole in three soils, two inceptisol (I) and one histosol (H). Textural classifications were: loam (101), loamy sand (102) and loam (H03), respectively. Data obtained followed a first-order degradation kinetics (R2 > or = 0.899) with DT50 values between 158 and 198 days. The production of 14CO2 from the 14C-ring-labelled test chemicals was very low and increased slightly during 63 days in all cases. The methanol extractable 14C-residues were higher than aqueous ones and both decreased over incubation time for the three soils. The formation of bound 14C-residues increased with time and final values were 11.3; 5.55 and 7.87% for 101, 102 and H03 respectively. Soil 101 showed the lowest mineralization rate and the highest bound residues formation, which might be explained by the clay fraction content. In contrast, an inverse behavior was found for soils 102 and H03, these results might be explained by the higher soil organic carbon content.

  7. Synthesis of /sup 14/C-labeled felbamate from phenylacetic-(methylene-/sup 14/C) acid

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Y.M.; Kucharczyk, N.; Sofia, R.D.

    1986-05-01

    A synthetic procedure for the preparation of 2-phenyl-1,3-propanediol-2-/sup 14/C dicarbamate, starting with phenylacetic-(methylene-/sup 14/C) acid was developed. The procedure from phenylacetic acid to 2-phenyl-1,3-propanediol dicarbamate has four steps via phenylmalonic acid and 2-phenyl-1,3-propanediol. The overall yield of all four steps was 28%.

  8. Application of high precision temperature control technology in infrared testing

    Science.gov (United States)

    Cao, Haiyuan; Cheng, Yong; Zhu, Mengzhen; Chu, Hua; Li, Wei

    2017-11-01

    In allusion to the demand of infrared system test, the principle of Infrared target simulator and the function of the temperature control are presented. The key technology of High precision temperature control is discussed, which include temperature gathering, PID control and power drive. The design scheme of temperature gathering is put forward. In order to reduce the measure error, discontinuously current and four-wire connection for the platinum thermal resistance are adopted. A 24-bits AD chip is used to improve the acquisition precision. Fuzzy PID controller is designed because of the large time constant and continuous disturbance of the environment temperature, which result in little overshoot, rapid response, high steady-state accuracy. Double power operational amplifiers are used to drive the TEC. Experiments show that the key performances such as temperature control precision and response speed meet the requirements.

  9. Weak gravitational lensing towards high-precision cosmology

    International Nuclear Information System (INIS)

    Berge, Joel

    2007-01-01

    This thesis aims at studying weak gravitational lensing as a tool for high-precision cosmology. We first present the development and validation of a precise and accurate tool for measuring gravitational shear, based on the shapelets formalism. We then use shapelets on real images for the first time, we analyze CFHTLS images, and combine them with XMM-LSS data. We measure the normalisation of the density fluctuations power spectrum σ 8 , and the one of the mass-temperature relation for galaxy clusters. The analysis of the Hubble space telescope COSMOS field confirms our σ 8 measurement and introduces tomography. Finally, aiming at optimizing future surveys, we compare the individual and combined merits of cluster counts and power spectrum tomography. Our results demonstrate that next generation surveys will allow weak lensing to yield its full potential in the high-precision cosmology era. (author) [fr

  10. Study of the reaction 14 C (p,p) 14 C

    International Nuclear Information System (INIS)

    Murillo, G.; Ramirez, J.; Avila, O.; Fernandez, M.; Darden, S.E.; Prior, R.P.; Sen, S.

    1991-04-01

    The study of the elastic scattering of polarized protons in 14 C, it has been very limited. Some angular distributions exists to low energy, as well as measures of excitation functions to several angles for the differential section and the vectorial analyzer power. A detailed study of the elastic scattering of protons by 14 C, it give us experimental information of the excited states in 15 N. The study of these states, is since of considerable interest it is not very easy to obtain a target of 14 C also in a reaction 14 C (p,p) 14 C is possible to obtain information of levels in 15 N to an excitation energy E X >14.95 MeV. (Author)

  11. High precision pulsar timing and spin frequency second derivatives

    Science.gov (United States)

    Liu, X. J.; Bassa, C. G.; Stappers, B. W.

    2018-05-01

    We investigate the impact of intrinsic, kinematic and gravitational effects on high precision pulsar timing. We present an analytical derivation and a numerical computation of the impact of these effects on the first and second derivative of the pulsar spin frequency. In addition, in the presence of white noise, we derive an expression to determine the expected measurement uncertainty of a second derivative of the spin frequency for a given timing precision, observing cadence and timing baseline and find that it strongly depends on the latter (∝t-7/2). We show that for pulsars with significant proper motion, the spin frequency second derivative is dominated by a term dependent on the radial velocity of the pulsar. Considering the data sets from three Pulsar Timing Arrays, we find that for PSR J0437-4715 a detectable spin frequency second derivative will be present if the absolute value of the radial velocity exceeds 33 km s-1. Similarly, at the current timing precision and cadence, continued timing observations of PSR J1909-3744 for about another eleven years, will allow the measurement of its frequency second derivative and determine the radial velocity with an accuracy better than 14 km s-1. With the ever increasing timing precision and observing baselines, the impact of the, largely unknown, radial velocities of pulsars on high precision pulsar timing can not be neglected.

  12. High precision mass measurements in Ψ and Υ families revisited

    International Nuclear Information System (INIS)

    Artamonov, A.S.; Baru, S.E.; Blinov, A.E.

    2000-01-01

    High precision mass measurements in Ψ and Υ families performed in 1980-1984 at the VEPP-4 collider with OLYA and MD-1 detectors are revisited. The corrections for the new value of the electron mass are presented. The effect of the updated radiative corrections has been calculated for the J/Ψ(1S) and Ψ(2S) mass measurements [ru

  13. Properties of the proton therapy. A high precision radiotherapy

    International Nuclear Information System (INIS)

    Anon.

    2005-01-01

    The proton therapy is a radiotherapy using protons beams. The protons present interesting characteristics but they need heavy technologies to be used, such particles accelerators, radiation protection wall and sophisticated technologies to reach the high precision allowed by their ballistic qualities (planning of treatment, beam conformation and patient positioning). (N.C.)

  14. Layered compression for high-precision depth data.

    Science.gov (United States)

    Miao, Dan; Fu, Jingjing; Lu, Yan; Li, Shipeng; Chen, Chang Wen

    2015-12-01

    With the development of depth data acquisition technologies, access to high-precision depth with more than 8-b depths has become much easier and determining how to efficiently represent and compress high-precision depth is essential for practical depth storage and transmission systems. In this paper, we propose a layered high-precision depth compression framework based on an 8-b image/video encoder to achieve efficient compression with low complexity. Within this framework, considering the characteristics of the high-precision depth, a depth map is partitioned into two layers: 1) the most significant bits (MSBs) layer and 2) the least significant bits (LSBs) layer. The MSBs layer provides rough depth value distribution, while the LSBs layer records the details of the depth value variation. For the MSBs layer, an error-controllable pixel domain encoding scheme is proposed to exploit the data correlation of the general depth information with sharp edges and to guarantee the data format of LSBs layer is 8 b after taking the quantization error from MSBs layer. For the LSBs layer, standard 8-b image/video codec is leveraged to perform the compression. The experimental results demonstrate that the proposed coding scheme can achieve real-time depth compression with satisfactory reconstruction quality. Moreover, the compressed depth data generated from this scheme can achieve better performance in view synthesis and gesture recognition applications compared with the conventional coding schemes because of the error control algorithm.

  15. High-precision multi-node clock network distribution.

    Science.gov (United States)

    Chen, Xing; Cui, Yifan; Lu, Xing; Ci, Cheng; Zhang, Xuesong; Liu, Bo; Wu, Hong; Tang, Tingsong; Shi, Kebin; Zhang, Zhigang

    2017-10-01

    A high precision multi-node clock network for multiple users was built following the precise frequency transmission and time synchronization of 120 km fiber. The network topology adopts a simple star-shaped network structure. The clock signal of a hydrogen maser (synchronized with UTC) was recovered from a 120 km telecommunication fiber link and then was distributed to 4 sub-stations. The fractional frequency instability of all substations is in the level of 10 -15 in a second and the clock offset instability is in sub-ps in root-mean-square average.

  16. Placental transfer of 14C-hexoprenaline

    International Nuclear Information System (INIS)

    Lipshitz, J.; Broyles, K.; Whybrew, W.D.; Ahokas, R.A.; Anderson, G.D.

    1982-01-01

    The placental transfer of a single intravenous injection of 14C-hexoprenaline was studied in eight pregnant New Zealand white rabbits. Maternal and fetal blood was sampled intermittently for 60 minutes after the injection. An initial rapid decrease in the levels of 14C-hexoprenaline in maternal blood was followed by a second slower phase, whereas fetal levels remained insignificant. The conclusion, therefore, is that the rapid improvement in fetal heart rate after the administration of a single maternal intravenous injection of hexoprenaline in the treatment of fetal distress is due to the action on the uterus and/or on maternal cardiovascular function, and not to direct stimulation of the fetus

  17. 14C2H4: distribution of 14C-labeled tissue metabolites in pea seedlings

    International Nuclear Information System (INIS)

    Giaquinta, R.; Beyer, E. Jr.

    1977-01-01

    The 14 C-metabolite distribution pattern following 14 C 2 H 4 metabolism in intact pea seedlings (Pisum sativum L.) was determined under various conditions. After a 24 hr exposure to 14 C 2 H 4 , the majority of 14 C-metabolites were water-soluble (60-70%) with lesser amounts in the protein (10-15%), lipid (1%), and insoluble (1-2%) fractions. Ion exchange chromatography of the water-soluble components into basic, neutral, and acidic fractions revealed a 50:40:10 distribution, respectively. Chromatography of the neutral fraction revealed two regions of radioactivity (Rf=0.38) and 0.63 which did not cochromatograph with twenty-two known sugars or neutral metabolites. Chromatograms of the basic fraction contained 3 regions of radioactivity. Similar distribution patterns were noted when 14 C 2 H 4 exposure was followed by a 6 hr air chase or when 5% CO 2 , an antagonist of ethylene action, was present during the exposure. Marked differences in the 14 C-metabolite distribution patterns were obtained when 14 CO 2 was substituted for 14 C 2 H 4 . These results indicate that the metabolic pathway involved in ethylene metabolism is different from that involved in intermediately carbon metabolism. (auth.)

  18. 14C measurements in aquifers with methane

    International Nuclear Information System (INIS)

    Barker, J.F.; Fritz, P.; Brown, R.M.

    1978-01-01

    A survey of various groundwater systems indicates that methane is a common trace constituent and occasionally a major carbon species in groundwaters. Thermocatalytic methane had delta 13 CCH 4 > -45% 0 and microbially-produced or biogenic methane had delta 13 CCH 4 0 . Groundwaters containing significant biogenic methane had abnormally heavy delta 13 C values for the inorganic carbon. Thermocatalytic methane had no apparent effect on the inorganic carbon. Because methanogenesis seriously affects the carbon isotope geochemistry of groundwaters, the correction of raw 14 C ages of affected groundwaters must consider these effects. Conceptual models are developed which adjust the 14 C activity of the groundwater for the effects of methanogenesis and for the dilution of carbon present during infiltration by simple dissolution of rock carbonate. These preliminary models are applied to groundwaters from the Alliston sand aquifer where methanogenesis has affected most samples. In this system, methanogenic bacteria using organic matter present in the aquifer matrix as substrate, have added inorganic carbon to the groundwater which has initiated further carbonate rock dissolution. These processes have diluted the inorganic carbon 14 C activity. (orig.) [de

  19. Anthropogenic 14C in the natural (aquatic) environment

    International Nuclear Information System (INIS)

    Begg, F.H.

    1992-11-01

    Increasing global awareness of the radiological significance of 14 C releases from the nuclear and radiochemical industries has resulted in a number of studies within the last decade investigating the atmospheric releases and their effect on the terrestrial biosphere. The basis of this study was to determine the behaviour and environmental distribution of anthropogenically produced 14 C released to the aquatic environment from the nuclear fuel reprocessing plant at Sellafield. Most sampling was undertaken in the Irish Sea with smaller scale studies being carried out in the Bristol Channel and the Grand Union Canal. Within the study area, from Earnse Point 40 km south of Sellafield, northwards to the Clyde Sea area, preliminary studies on intertidal biota samples ie. mussels, winkles and seaweed indicated enriched 14 C specific activities in all the samples relative to the current ambient level of 115.4 pM. The highest activities were observed in the immediate vicinity of the discharge location; mussels with a measured activity of 787 pM, winkles of 613 pM and seaweed of 415 pM. The 14 C specific activity observed at most sites appeared to be organism dependent with mussels>winkles>seaweed. This is the result of differences in the uptake mechanisms of the organisms and indicates that the dissolved inorganic carbon and the particulate material within the water column are enriched in 14 C . However, on analysis of the biogeochemical fractions of the water column, enriched 14 C activities were observed only in the DIC fraction which could explain those activities found in the seaweed but not those in the mussels and winkles. Enriched 14 C activities were found in the phytoplankton, indicating that there is a source of enriched organic particulate material within the water column as a result of photosynthetic uptake of enriched DIC, however this will be a seasonal effect. Nevertheless, this enrichment is still not high enough to support the activities observed in the

  20. Metabolic kinetics and biological effects of radiocarbon (14C)

    International Nuclear Information System (INIS)

    Vasilenko, I.Ya.; Osipov, V.A.; Lyaginskaya, A.M.; Bugryshev, P.F.; Istomina, A.G.; Turova, V.I.; Dement'ev, S.I.; Zhorova, E.S.; Mart'yanov, B.M.; Shal'nova, G.A.; Kuz'mina, T.D.; Shebenko, V.A.; Pomerantseva, M.D.; Ramajya, L.K.

    1988-01-01

    Radiocarbon 14 C is one of the most widespread radionuclides. Increased concentration of anthropogenic 14 C in the biosphere is a problem of considerable hygienic and ecological significance. The paper presents the results of comprehensive studies for years on biokinetics of the main 14 C compounds, inorganic (Na H 14 CO 3 , Na 2 14 CO 3 , K 2 14 CO 3 , Ca 14 CO 3 ) as well as organic ( 14 C-glucose, 14 C-succinic acid, 14 C-glucosamine, 14 C-glycine, 14 C-tryptophane, 14 C-valine, 14 C-palmitic acid, 14 C-stearic acid, 14 C-ethyl alcohol, 14 C-methyl alcohol, 14 C-urea), of 14 C as food constituent and of elementary radiocarbon. The 14 C toxicity is investigated for both acute and chronic small doses received by animals. The nuclide's genetic efficiency is assessed. Based on research evidence, the accumulation multiple and equilibrium time are estimated for long-term 14 C intake by humans. The data may be used for setting genetic standards and estimating an anthropogenic increase of 14 C concentration in the environment. The hazard of anthropogenic radiocarbon is assessed with allowance for further development of nuclear power industry. (author)

  1. Synthesis of 14C analogue of 1,2-diaryl-[2-14C]-pyrroles

    International Nuclear Information System (INIS)

    Saemian, N.; Shirvani, G.; Matloubi, H.

    2007-01-01

    Three 1,2-diaryl pyrroles selective COX-2 inhibitors, 2-(4-fluorophenyl)-5-methyl-1-(4-methylsulfonyl-phenyl)-1H pyrrole, 2-(4-fluorophenyl)-1- [4-(methylsulfonyl) phenyl]-1H-pyrrole and 4-[2-(4-fluorophenyl)-1H-pyrrol-1-yl]benzenesulfon-amide, all three labeled with 14 C in the 2-position were prepared from para-fluoro-benzaldehyde-[carbonyl- 14 C]. (author)

  2. High-precision ground-based photometry of exoplanets

    Directory of Open Access Journals (Sweden)

    de Mooij Ernst J.W.

    2013-04-01

    Full Text Available High-precision photometry of transiting exoplanet systems has contributed significantly to our understanding of the properties of their atmospheres. The best targets are the bright exoplanet systems, for which the high number of photons allow very high signal-to-noise ratios. Most of the current instruments are not optimised for these high-precision measurements, either they have a large read-out overhead to reduce the readnoise and/or their field-of-view is limited, preventing simultaneous observations of both the target and a reference star. Recently we have proposed a new wide-field imager for the Observatoir de Mont-Megantic optimised for these bright systems (PI: Jayawardhana. The instruments has a dual beam design and a field-of-view of 17' by 17'. The cameras have a read-out time of 2 seconds, significantly reducing read-out overheads. Over the past years we have obtained significant experience with how to reach the high precision required for the characterisation of exoplanet atmospheres. Based on our experience we provide the following advice: Get the best calibrations possible. In the case of bad weather, characterise the instrument (e.g. non-linearity, dome flats, bias level, this is vital for better understanding of the science data. Observe the target for as long as possible, the out-of-transit baseline is as important as the transit/eclipse itself. A short baseline can lead to improperly corrected systematic and mis-estimation of the red-noise. Keep everything (e.g. position on detector, exposure time as stable as possible. Take care that the defocus is not too strong. For a large defocus, the contribution of the total flux from the sky-background in the aperture could well exceed that of the target, resulting in very strict requirements on the precision at which the background is measured.

  3. High Precision Edge Detection Algorithm for Mechanical Parts

    Directory of Open Access Journals (Sweden)

    Duan Zhenyun

    2018-04-01

    Full Text Available High precision and high efficiency measurement is becoming an imperative requirement for a lot of mechanical parts. So in this study, a subpixel-level edge detection algorithm based on the Gaussian integral model is proposed. For this purpose, the step edge normal section line Gaussian integral model of the backlight image is constructed, combined with the point spread function and the single step model. Then gray value of discrete points on the normal section line of pixel edge is calculated by surface interpolation, and the coordinate as well as gray information affected by noise is fitted in accordance with the Gaussian integral model. Therefore, a precise location of a subpixel edge was determined by searching the mean point. Finally, a gear tooth was measured by M&M3525 gear measurement center to verify the proposed algorithm. The theoretical analysis and experimental results show that the local edge fluctuation is reduced effectively by the proposed method in comparison with the existing subpixel edge detection algorithms. The subpixel edge location accuracy and computation speed are improved. And the maximum error of gear tooth profile total deviation is 1.9 μm compared with measurement result with gear measurement center. It indicates that the method has high reliability to meet the requirement of high precision measurement.

  4. High Precision Edge Detection Algorithm for Mechanical Parts

    Science.gov (United States)

    Duan, Zhenyun; Wang, Ning; Fu, Jingshun; Zhao, Wenhui; Duan, Boqiang; Zhao, Jungui

    2018-04-01

    High precision and high efficiency measurement is becoming an imperative requirement for a lot of mechanical parts. So in this study, a subpixel-level edge detection algorithm based on the Gaussian integral model is proposed. For this purpose, the step edge normal section line Gaussian integral model of the backlight image is constructed, combined with the point spread function and the single step model. Then gray value of discrete points on the normal section line of pixel edge is calculated by surface interpolation, and the coordinate as well as gray information affected by noise is fitted in accordance with the Gaussian integral model. Therefore, a precise location of a subpixel edge was determined by searching the mean point. Finally, a gear tooth was measured by M&M3525 gear measurement center to verify the proposed algorithm. The theoretical analysis and experimental results show that the local edge fluctuation is reduced effectively by the proposed method in comparison with the existing subpixel edge detection algorithms. The subpixel edge location accuracy and computation speed are improved. And the maximum error of gear tooth profile total deviation is 1.9 μm compared with measurement result with gear measurement center. It indicates that the method has high reliability to meet the requirement of high precision measurement.

  5. Strategy for Realizing High-Precision VUV Spectro-Polarimeter

    Science.gov (United States)

    Ishikawa, R.; Narukage, N.; Kubo, M.; Ishikawa, S.; Kano, R.; Tsuneta, S.

    2014-12-01

    Spectro-polarimetric observations in the vacuum ultraviolet (VUV) range are currently the only means to measure magnetic fields in the upper chromosphere and transition region of the solar atmosphere. The Chromospheric Lyman-Alpha Spectro-Polarimeter (CLASP) aims to measure linear polarization at the hydrogen Lyman- α line (121.6 nm). This measurement requires a polarization sensitivity better than 0.1 %, which is unprecedented in the VUV range. We here present a strategy with which to realize such high-precision spectro-polarimetry. This involves the optimization of instrument design, testing of optical components, extensive analyses of polarization errors, polarization calibration of the instrument, and calibration with onboard data. We expect that this strategy will aid the development of other advanced high-precision polarimeters in the UV as well as in other wavelength ranges.

  6. The production of (14C) oxalate during the metabolism of (14C) carbohydrates in isolated rat hepatocytes.

    Science.gov (United States)

    Rofe, A M; James, H M; Bais, R; Edwards, J B; Conyers, R A

    1980-04-01

    Oxalate (14C) was produced during the metabolism of (U-14C) carbohydrates in hepatocytes isolated from normal rats. At 10 mM, the order of oxalate production was fructose > glycerol > xylitol > sorbitol greater than or equal to glucose in the ratio 10 : 4 : 3 : 1 : 1. This difference between oxalate production from fructose and glucose was reflected in their rates of utilisation, glucose being poorly metabolised in hepatocytes from fasted rats. Fructose was rapidly metabolised, producing glucose, lactate and pyruvate as the major metabolites. Glycerol, xylitol and sorbitol were metabolised at half the rate of fructose, the major metabolites being glucose, lactate and glycerophosphate. The marked similarity in the pattern of intermediary metabolites produced by these polyols was not, however, reflected in the rates of oxalate production. Hepatic polyol metabolism resulted in high levels of cytosolic NADH, as indicated by elevated lactate : pyruvate and glycerophosphate : dihydroxyacetone phosphate ratios. The artificial electron acceptor, phenazine methosulphate (PMS) stimulated oxalate production from the polyols, particularly xylitol. In the presence of PMS, the order of oxalate production was fructose greater than or equal to xylitol > glycerol > sorbitol in the ratio 10 : 10 : 6 : 2. The production of glucose, lactate and pyruvate from the polyols was also stimulated by PMS, whereas the general metabolism of fructose, including oxalate production, was little affected. Oxalate (14C) was produced from (1-14C), (2-14C) and (6-14C) but not (3,4-14C) glucose in hepatocytes isolated from non-fasted, pyridoxine-deficient rats. Whilst this labelling pattern is consistent with oxalate being produced by a number of pathways, it is suggested that metabolism via hydroxypyruvate is a major route for oxalate production from various carbohydrates, with perhaps the exception of xylitol, which appears to have an alternative mechanism for oxalate production. The observation that

  7. Evaluation of 14C abundance in soil respiration using accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Koarashi, Jun; Iida, Takao; Moriizumi, Jun; Asano, Tomohiro

    2004-01-01

    To clarify the behavior of 14 C in terrestrial ecosystems, 14 C abundance in soil respiration was evaluated in an urban forest with a new method involving a closed chamber technique and 14 C measurement by accelerator mass spectrometry (AMS). Soil respiration had a higher Δ 14 C than the contemporary atmosphere. This indicates that a significant portion of soil respiration is derived from the decomposition of soil organic matter enriched in 14 C by atmospheric nuclear weapons tests, with a notable time lag between atmospheric 14 C addition and re-emission from soil. On the other hand, δ 14 C in soil respiration demonstrated that 14 C abundance ratio itself in soil-respired CO 2 is not always high compared with that in atmospheric CO 2 because of the isotope fractionation during plant photosynthesis and microbial decomposition of soil organic matter. The Δ 14 C in soil respiration was slightly lower in August than in March, suggesting a relatively high contribution of plant root respiration and decomposition of newly accumulated and/or 14 C-depleted soil organic matter to the total soil respiration in August

  8. Precision crystal alignment for high-resolution electron microscope imaging

    International Nuclear Information System (INIS)

    Wood, G.J.; Beeching, M.J.

    1990-01-01

    One of the more difficult tasks involved in obtaining quality high-resolution electron micrographs is the precise alignment of a specimen into the required zone. The current accepted procedure, which involves changing to diffraction mode and searching for symmetric point diffraction pattern, is insensitive to small amounts of misalignment and at best qualitative. On-line analysis of the fourier space representation of the image, both for determining and correcting crystal tilt, is investigated. 8 refs., 42 figs

  9. High-precision thickness measurements using beta backscatter

    International Nuclear Information System (INIS)

    Heckman, R.V.

    1978-11-01

    A two-axis, automated fixture for use with a high-intensity Pm-147 source and a photomultiplier-scintillation beta-backscatter probe for making thickness measurements has been designed and built. A custom interface was built to connect the system to a minicomputer, and software was written to position the tables, control the probe, and make the measurements. Measurements can be made in less time with much greater precision than by the method previously used

  10. High-precision reflectivity measurements: improvements in the calibration procedure

    Science.gov (United States)

    Jupe, Marco; Grossmann, Florian; Starke, Kai; Ristau, Detlev

    2003-05-01

    The development of high quality optical components is heavily depending on precise characterization procedures. The reflectance and transmittance of laser components are the most important parameters for advanced laser applications. In the industrial fabrication of optical coatings, quality management is generally insured by spectral photometric methods according to ISO/DIS 15386 on a medium level of accuracy. Especially for high reflecting mirrors, a severe discrepancy in the determination of the absolute reflectivity can be found for spectral photometric procedures. In the first part of the CHOCLAB project, a method for measuring reflectance and transmittance with an enhanced precision was developed, which is described in ISO/WD 13697. In the second part of the CHOCLAB project, the evaluation and optimization for the presented method is scheduled. Within this framework international Round-Robin experiment is currently in progress. During this Round-Robin experiment, distinct deviations could be observed between the results of high precision measurement facilities of different partners. Based on the extended experiments, the inhomogeneity of the sample reflectivity was identified as one important origin for the deviation. Consequently, this inhomogeneity is also influencing the calibration procedure. Therefore, a method was developed that allows the calibration of the chopper blade using always the same position on the reference mirror. During the investigations, the homogeneity of several samples was characterized by a surface mapping procedure for 1064 nm. The measurement facility was extended to the additional wavelength 532 nm and a similar set-up was assembled at 10.6 μm. The high precision reflectivity procedure at the mentioned wavelengths is demonstrated for exemplary measurements.

  11. High precision frequency estimation for harpsichord tuning classification

    OpenAIRE

    Tidhar, D.; Mauch, M.; Dixon, S.

    2010-01-01

    We present a novel music signal processing task of classifying the tuning of a harpsichord from audio recordings of standard musical works. We report the results of a classification experiment involving six different temperaments, using real harpsichord recordings as well as synthesised audio data. We introduce the concept of conservative transcription, and show that existing high-precision pitch estimation techniques are sufficient for our task if combined with conservative transcription. In...

  12. High precision straw tube chamber with cathode readout

    International Nuclear Information System (INIS)

    Bychkov, V.N.; Golutvin, I.A.; Ershov, Yu.V.

    1992-01-01

    The high precision straw chamber with cathode readout was constructed and investigated. The 10 mm straws were made of aluminized mylar strip with transparent longitudinal window. The X coordinate information has been taken from the cathode strips as induced charges and investigated via centroid method. The spatial resolution σ=120 μm has been obtained with signal/noise ratio about 60. The possible ways for improving the signal/noise ratio have been described. 7 refs.; 8 figs

  13. A high precision straw tube chamber with cathode readout

    International Nuclear Information System (INIS)

    Bychkov, V.N.; Golutvin, I.A.; Ershov, Yu.V.; Zubarev, E.V.; Ivanov, A.B.; Lysiakov, V.N.; Makhankov, A.V.; Movchan, S.A.; Peshekhonov, V.D.; Preda, T.

    1993-01-01

    The high precision straw chamber with cathode readout was constructed and investigated. The 10 mm diameter straws were made of aluminized Mylar with transparent longitudinal window. The X-coordinate information has been taken from cathode strips as induced charges and investigated with the centroid method. The spatial resolution σ x =103 μm was obtained at a signal-to-noise ratio of about 70. The possible ways to improve the signal-to-noise ratio are discussed. (orig.)

  14. High precision spectroscopy of pionic and antiprotonic atoms; Spectroscopie de precision des atomes pioniques et antiprotoniques

    Energy Technology Data Exchange (ETDEWEB)

    El-Khoury, P

    1998-04-15

    The study of exotic atoms, in which an orbiting electron of a normal atom is replaced by a negatively charged particle ({pi}{sup -}, {mu}{sup -}, p, {kappa}{sup -}, {sigma}{sup -},...) may provide information on the orbiting particle and the atomic nucleus, as well as on their interaction. In this work, we were interested in pionic atoms ({pi}{sup -14} N) on the one hand in order to determine the pion mass with high accuracy (4 ppm), and on the other hand in antiprotonic atoms (pp-bar) in order to study the strong nucleon-antinucleon interaction at threshold. In this respect, a high-resolution crystal spectrometer was coupled to a cyclotron trap which provides a high stop density for particles in gas targets at low pressure. Using curved crystals, an extended X-ray source could be imaged onto the detector. Charge-Coupled Devices were used as position sensitive detectors in order to measure the Bragg angle of the transition to a high precision. The use of gas targets resolved the ambiguity owing to the number of K electrons for the value of the pion mass, and, for the first time, strong interaction shift and broadening of the 2p level in antiprotonic hydrogen were measured directly. (author)

  15. High-Precision Computation: Mathematical Physics and Dynamics

    International Nuclear Information System (INIS)

    Bailey, D.H.; Barrio, R.; Borwein, J.M.

    2010-01-01

    At the present time, IEEE 64-bit oating-point arithmetic is suficiently accurate for most scientic applications. However, for a rapidly growing body of important scientic computing applications, a higher level of numeric precision is required. Such calculations are facilitated by high-precision software packages that include high-level language translation modules to minimize the conversion e ort. This pa- per presents a survey of recent applications of these techniques and provides someanalysis of their numerical requirements. These applications include supernova simulations, climate modeling, planetary orbit calculations, Coulomb n-body atomic systems, studies of the one structure constant, scattering amplitudes of quarks, glu- ons and bosons, nonlinear oscillator theory, experimental mathematics, evaluation of orthogonal polynomials, numerical integration of ODEs, computation of periodic orbits, studies of the splitting of separatrices, detection of strange nonchaotic at- tractors, Ising theory, quantum held theory, and discrete dynamical systems. We conclude that high-precision arithmetic facilities are now an indispensable compo- nent of a modern large-scale scientic computing environment.

  16. High precision electrostatic potential calculations for cylindrically symmetric lenses

    International Nuclear Information System (INIS)

    Edwards, David Jr.

    2007-01-01

    A method is developed for a potential calculation within cylindrically symmetric electrostatic lenses using mesh relaxation techniques, and it is capable of considerably higher accuracies than currently available. The method involves (i) creating very high order algorithms (orders of 6, 8, and 10) for determining the potentials at points in the net using surrounding point values, (ii) eliminating the effect of the large errors caused by singular points, and (iii) reducing gradients in the high gradient regions of the geometry, thereby allowing the algorithms used in these regions to achieve greater precisions--(ii) and (iii) achieved by the use of telescopic multiregions. In addition, an algorithm for points one unit from a metal surface is developed, allowing general mesh point algorithms to be used in these situations, thereby taking advantage of the enhanced precision of the latter. A maximum error function dependent on a sixth order gradient of the potential is defined. With this the single point algorithmic errors are able to be viewed over the entire net. Finally, it is demonstrated that by utilizing the above concepts and procedures, the potential of a point in a reasonably high gradient region of a test geometry can realize a precision of less than 10 -10

  17. High-Precision Computation: Mathematical Physics and Dynamics

    Energy Technology Data Exchange (ETDEWEB)

    Bailey, D. H.; Barrio, R.; Borwein, J. M.

    2010-04-01

    At the present time, IEEE 64-bit oating-point arithmetic is suficiently accurate for most scientic applications. However, for a rapidly growing body of important scientic computing applications, a higher level of numeric precision is required. Such calculations are facilitated by high-precision software packages that include high-level language translation modules to minimize the conversion e ort. This pa- per presents a survey of recent applications of these techniques and provides someanalysis of their numerical requirements. These applications include supernova simulations, climate modeling, planetary orbit calculations, Coulomb n-body atomic systems, studies of the one structure constant, scattering amplitudes of quarks, glu- ons and bosons, nonlinear oscillator theory, experimental mathematics, evaluation of orthogonal polynomials, numerical integration of ODEs, computation of periodic orbits, studies of the splitting of separatrices, detection of strange nonchaotic at- tractors, Ising theory, quantum held theory, and discrete dynamical systems. We conclude that high-precision arithmetic facilities are now an indispensable compo- nent of a modern large-scale scientic computing environment.

  18. High precision efficiency calibration of a HPGe detector

    International Nuclear Information System (INIS)

    Nica, N.; Hardy, J.C.; Iacob, V.E.; Helmer, R.G.

    2003-01-01

    Many experiments involving measurements of γ rays require a very precise efficiency calibration. Since γ-ray detection and identification also requires good energy resolution, the most commonly used detectors are of the coaxial HPGe type. We have calibrated our 70% HPGe to ∼ 0.2% precision, motivated by the measurement of precise branching ratios (BR) in superallowed 0 + → 0 + β decays. These BRs are essential ingredients in extracting ft-values needed to test the Standard Model via the unitarity of the Cabibbo-Kobayashi-Maskawa matrix, a test that it currently fails by more than two standard deviations. To achieve the required high precision in our efficiency calibration, we measured 17 radioactive sources at a source-detector distance of 15 cm. Some of these were commercial 'standard' sources but we achieved the highest relative precision with 'home-made' sources selected because they have simple decay schemes with negligible side feeding, thus providing exactly matched γ-ray intensities. These latter sources were produced by us at Texas A and M by n-activation or by nuclear reactions. Another critical source among the 17 was a 60 Co source produced by Physikalisch-Technische Bundesanstalt, Braunschweig, Germany: its absolute activity was quoted to better than 0.06%. We used it to establish our absolute efficiency, while all the other sources were used to determine relative efficiencies, extending our calibration over a large energy range (40-3500 keV). Efficiencies were also determined with Monte Carlo calculations performed with the CYLTRAN code. The physical parameters of the Ge crystal were independently determined and only two (unmeasurable) dead-layers were adjusted, within physically reasonable limits, to achieve precise absolute agreement with our measured efficiencies. The combination of measured efficiencies at more than 60 individual energies and Monte Carlo calculations to interpolate between them allows us to quote the efficiency of our

  19. Studies on 14C-extractable residue, 14C-bound residue and mineralization of 14C-labeled chlorsulfuron in soils

    International Nuclear Information System (INIS)

    Ye Qingfu; Sun Jinhe; Qi Wenyuan; Wu Jianmin

    2003-01-01

    The purpose of the present study was to investigate 14 C-extractable residue ( 14 C-ER), 14 C-bound residue ( 14 C-BR) and mineralization of 14 C-labeled chlorsulfuron in soils by using isotope technique. The main factors affecting 14 C-BR formation and the distribution pattern of 14 C-BR in humus were also discussed in details. The results were as follows: (1) The 14 C-ER content of 14 C-chlorsulfuron in seven kinds of soil was positively related to soil pH and negatively related to clay content and organic matter content significantly. Moreover. the decrease rate of 14 C-chlorsulfuron parent compound derived from 14 C-ER in soils followed the first order rate reaction, the half-life in Soil 1-Soil 7 were 13.0, 13.1, 17.7, 133.3, 21.8, 22.1, 33.2 days, respectively. It was concluded that soil pH was the main factor affecting the degradation of 14 C-chlorsulfuron. (2) The 14 C-BR content of 14 C-chlorsulfuron in soils increased sharply with the incubation time during the initial 20 days, then changed slowly with time. However, 14 C-BR content during the whole incubation depended on soil types. The order of 14 C-BR content followed Soil 1 > Soil 2, Soil 5 and Soil 6 > Soil 3 > Soil 7 > Soil 4. The maximum values of 14 C-BR content of 14 C-chlorsulfuron in Soil 1-Soil 7 were 53.3%, 40.9%, 37.8%, 16.4%, 42.5%, 41.0% and 31.3% of applied amount. In addition, the 14 C-BR content of 14 C-chlorsulfuron in soils was negatively related to soil pH significantly, and positively related to the clay content. The soil pH was found to be the main factor affecting BR formation of 14 C-chlorsulfuron among the basic properties of soil. (3) During the whole periods of the incubation, the 14 C-BR of 14 C-chlorsulfuron in soils was mainly distributed in fulvic acid and humin. The relative percent of 14 C-BR in fulvic acid was higher than in humin. While the relative percentage of the 14 C-BR in humic acid only account for 2%. It was suggested that fulvic acid played an important role

  20. 14C Accelerator mass spectrometry in Brazil

    International Nuclear Information System (INIS)

    Macario, K.D.; Gomes, P.R.S.; Anjos, Roberto M.; Linares, R.; Queiroz, E.A.; Oliveira, F.M.; Cardozo, L.; Carvalho, C.R.A.

    2011-01-01

    Radiocarbon Accelerator Mass Spectrometry is an ultra-sensitive technique that enables the direct measurement of carbon isotopes in samples as small as a few milligrams. The possibility of dating or tracing rare or even compound specific carbon samples has application in many fields of science such as Archaeology, Geosciences and Biomedicine. Several kinds of material such as wood, charcoal, carbonate and bone can be chemically treated and converted to graphite to be measured in the accelerator system. The Physics Institute of Universidade Federal Fluminense (UFF), in Brazil will soon be able to perform the complete 14 C-AMS measurement of samples. At the Nuclear Chronology Laboratory (LACRON) samples are prepared and converted to carbon dioxide. A stainless steel vacuum system was constructed for carbon dioxide purification and graphitization is performed in sealed tubes in a muffle oven. Graphite samples will be analyzed in a 250 kV Single Stage Accelerator produced by National Electrostatic Corporation which will be installed in the beginning of 2012. With the sample preparation laboratory at LACRON and the SSAMS system, the Physics Institute of UFF will be the first 14 C-AMS facility in Latin America. (author)

  1. Synthesis of dexamethasone-4-14C

    International Nuclear Information System (INIS)

    Rao, P.N.; Cessac, J.W.; Hill, K.A.

    1982-01-01

    The bismethylenedioxy (BMD) derivative of dexamethasone 2 was silylated with trimethylchlorosilane and imidazole in dimethylformamide to give the 11β-trimethylsilyloxy BMD derivative 3. The Δ 1 -double bond in 3 was hydrogenated over 5% palladium on carbon to give the Δ 4 -3-oxo steroid 4. Oxidation of 4 with potassium permanganate-sodium metaperiodate gave the seco-acid 5 which on subsequent treatment with acetic anhydride; sodium acetate and triethylamine gave the enol-lactone 6. The enol-lactone 6 was reacted with 14 C-methylmagnesium iodide to give an adduct 7a which on heating at reflux with lithium 2,6-di-t-butylphenoxide in dioxane gave the Δ 4 -3-oxo derivative 8. Compound 8 was heated at reflux with m-iodylbenzoic acid and diphenyl diselenide in toluene to give the Δsup(1,4)-3-oxo steroid 9. The protecting BMD and silyl groups were removed in a single step by reaction with aqueous trifluoroacetic acid containing 2N hydrochloric acid at room temperature to give dexamethasone-4- 14 C 10. (author)

  2. High precision capacitive beam phase probe for KHIMA project

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Ji-Gwang, E-mail: windy206@hanmail.net [Korea Institute of Radiological and Medical Sciences, 215–4, Gongneung-dong, Nowon-t, Seoul 139–706 (Korea, Republic of); Yang, Tae-Keun [Korea Institute of Radiological and Medical Sciences, 215–4, Gongneung-dong, Nowon-t, Seoul 139–706 (Korea, Republic of); Forck, Peter [GSI Helmholtz Centre for Ion Research, Darmstadt 64291, German (Germany)

    2016-11-21

    In the medium energy beam transport (MEBT) line of KHIMA project, a high precision beam phase probe monitor is required for a precise tuning of RF phase and amplitude of Radio Frequency Quadrupole (RFQ) accelerator and IH-DTL linac. It is also used for measuring a kinetic energy of ion beam by time-of-flight (TOF) method using two phase probes. The capacitive beam phase probe has been developed. The electromagnetic design of the high precision phase probe was performed to satisfy the phase resolution of 1° (@200 MHz). It was confirmed by the test result using a wire test bench. The measured phase accuracy of the fabricated phase probe is 1.19 ps. The pre-amplifier electronics with the 0.125 ∼ 1.61 GHz broad-band was designed and fabricated for amplifying the signal strength. The results of RF frequency and beam energy measurement using a proton beam from the cyclotron in KIRAMS is presented.

  3. High precision ray tracing in cylindrically symmetric electrostatics

    Energy Technology Data Exchange (ETDEWEB)

    Edwards Jr, David, E-mail: dej122842@gmail.com

    2015-11-15

    Highlights: • High precision ray tracing is formulated using power series techniques. • Ray tracing is possible for fields generated by solution to laplace's equation. • Spatial and temporal orders of 4–10 are included. • Precisions in test geometries of hemispherical deflector analyzer of ∼10{sup −20} have been obtained. • This solution offers a considerable extension to the ray tracing accuracy over the current state of art. - Abstract: With the recent availability of a high order FDM solution to the curved boundary value problem, it is now possible to determine potentials in such geometries with considerably greater accuracy than had been available with the FDM method. In order for the algorithms used in the accurate potential calculations to be useful in ray tracing, an integration of those algorithms needs to be placed into the ray trace process itself. The object of this paper is to incorporate these algorithms into a solution of the equations of motion of the ray and, having done this, to demonstrate its efficacy. The algorithm incorporation has been accomplished by using power series techniques and the solution constructed has been tested by tracing the medial ray through concentric sphere geometries. The testing has indicated that precisions of ray calculations of 10{sup −20} are now possible. This solution offers a considerable extension to the ray tracing accuracy over the current state of art.

  4. The various correction methods to the high precision aeromagnetic data

    International Nuclear Information System (INIS)

    Xu Guocang; Zhu Lin; Ning Yuanli; Meng Xiangbao; Zhang Hongjian

    2014-01-01

    In the airborne geophysical survey, an outstanding achievement first depends on the measurement precision of the instrument, and the choice of measurement conditions, the reliability of data collection, followed by the correct method of measurement data processing, the rationality of the data interpretation. Obviously, geophysical data processing is an important task for the comprehensive interpretation of the measurement results, processing method is correct or not directly related to the quality of the final results. we have developed a set of personal computer software to aeromagnetic and radiometric survey data processing in the process of actual production and scientific research in recent years, and successfully applied to the production. The processing methods and flowcharts to the high precision aromagnetic data were simply introduced in this paper. However, the mathematical techniques of the various correction programes to IGRF and flying height and magnetic diurnal variation were stressily discussed in the paper. Their processing effectness were illustrated by taking an example as well. (authors)

  5. Strategies for high-precision Global Positioning System orbit determination

    Science.gov (United States)

    Lichten, Stephen M.; Border, James S.

    1987-01-01

    Various strategies for the high-precision orbit determination of the GPS satellites are explored using data from the 1985 GPS field test. Several refinements to the orbit determination strategies were found to be crucial for achieving high levels of repeatability and accuracy. These include the fine tuning of the GPS solar radiation coefficients and the ground station zenith tropospheric delays. Multiday arcs of 3-6 days provided better orbits and baselines than the 8-hr arcs from single-day passes. Highest-quality orbits and baselines were obtained with combined carrier phase and pseudorange solutions.

  6. International workshop on advanced materials for high precision detectors. Proceedings

    International Nuclear Information System (INIS)

    Nicquevert, B.; Hauviller, C.

    1994-01-01

    These proceedings gather together the contributions to the Workshop on Advanced Materials for High Precision Detectors, which was held from 28-30 September 1994 in Archamps, Haute-Savoie, France. This meeting brought together international experts (researchers, physicists and engineers) in the field of advanced materials and their use in high energy physics detectors or spacecraft applications. Its purpose was to discuss the status of the different materials currently in use in the structures of detectors and spacecraft, together with their actual performances, technological implications and future prospects. Environmental effects, such as those of moisture and radiation, were discussed, as were design and manufacturing technologies. Some case studies were presented. (orig.)

  7. Translocation of 14-C in ponderosa pine seedlings

    Science.gov (United States)

    Robert R. Ziemer

    1971-01-01

    The movement of 14-C from the old needles to the roots, and later to the new needles, was measured in 2-year-old ponderosa pine seedlings. The seedlings were in one of three growth stages at the time of the feeding of 14-CO-2: 9 days before spring bud break with no root activity; 7 days before spring bud break with high root activity; and 7 days after spring bud break...

  8. A procedure for batch separation of 14C-hexose from 14C-sucrose

    International Nuclear Information System (INIS)

    Tarpley, L.; Vietor, D.M.

    1991-01-01

    This presentation describes a method for separating 14 C-hexose from 14 C-sucrose in extracts of plant tissue. Portions of ethanol extracts are treated with activated charcoal in microcentrifuge tubes. Aliquots are removed, ethanol evaporated and replaced with reaction mixture that phosphorylates hexose (HEPPS, K 2 HPO 4 , Mg(C 2 H 3 O 2 ) 2 , ovalbumen, Na 2 ATP, yeast hexokinase). After a time course, the hexokinase reaction is stopped (slowed considerably) to minimize effects of contamination enzyme activities. The stopping agent used is lyxose, a nonphosphorylable analogue of glucose. The strong anionic charge of phosphate introduced through the hexokinase action results in binding (> 95%) of hexose-phosphate to anion-exchange resin. Sucrose remains unbound (> 95%) in solution. This batch ion-exchange is performed in microcentrifuge tubes to allow many samples to be processed simultaneously. Recovery of radiolabel in extracts is complete (99%), and determinations are repeatable (cv = 23%). This method for routinely separating and quantifying 14 C-hexose and 14 C-sucrose in plant tissue extracts can contribute to the economy and feasibility of studies of 14 C-photoassimilate partitioning to soluble sugars within and among plant tissues

  9. Precise muon drift tube detectors for high background rate conditions

    Energy Technology Data Exchange (ETDEWEB)

    Engl, Albert

    2011-08-04

    The muon spectrometer of the ATLAS-experiment at the Large Hadron Collider consists of drift tube chambers, which provide the precise measurement of trajectories of traversing muons. In order to determine the momentum of the muons with high precision, the measurement of the position of the muon in a single tube has to be more accurate than {sigma}{<=}100 {mu}m. The large cross section of proton-proton-collisions and the high luminosity of the accelerator cause relevant background of neutrons and {gamma}s in the muon spectrometer. During the next decade a luminosity upgrade to 5.10{sup 34} cm{sup -2}s{sup -1} is planned, which will increase the background counting rates considerably. In this context this work deals with the further development of the existing drift chamber technology to provide the required accuracy of the position measurement under high background conditions. Two approaches of improving the drift tube chambers are described: - In regions of moderate background rates a faster and more linear drift gas can provide precise position measurement without changing the existing hardware. - At very high background rates drift tube chambers consisting of tubes with a diameter of 15 mm are a valuable candidate to substitute the CSC muon chambers. The single tube resolution of the gas mixture Ar:CO{sub 2}:N{sub 2} in the ratio of 96:3:1 Vol %, which is more linear and faster as the currently used drift gas Ar:CO{sub 2} in the ratio of 97:3 Vol %, was determined at the Cosmic Ray Measurement Facility at Garching and at high {gamma}-background counting rates at the Gamma Irradiation Facility at CERN. The alternative gas mixture shows similar resolution without background. At high background counting rates it shows better resolution as the standard gas. To analyse the data the various parts of the setup have to be aligned precisely to each other. The change to an alternative gas mixture allows the use of the existing hardware. The second approach are drift tubes

  10. The compact 14C AMS facility of Paleo Labo Co., Ltd., Japan

    International Nuclear Information System (INIS)

    Kobayashi, Koichi; Niu, Etsuko; Itoh, Shigeru; Yamagata, Hideki; Lomtatidze, Zaur; Jorjoliani, Ineza; Nakamura, Kentaro; Fujine, Hisashi

    2007-01-01

    A compact AMS system was installed by a private company in Japan for a 14 C dating business. Since this system was designed to be very compact with a low voltage accelerator, it has unique features compared to larger AMS systems. For example, the stripper gas pressure has to be maintained at a high level to dissociate molecular ions. However, it cannot be too high because ion transmission decreases at higher stripper gas pressures due to increased angular straggling of the ions scattered by the high density stripper gas. The optimum pressure of the stripper gas for the lowest background and the highest transmission was investigated. With all the features of the compact system, the produced measurements can be of quite high precision. In the ten months after the installation of the equipment in November 2004, we have measured more than 1400 dating samples

  11. Dating of groundwater with tritium and 14C

    International Nuclear Information System (INIS)

    Muennich, K.O.; Roether, W.; Thilo, L.

    1967-01-01

    Shallow groundwater can be dated with some accuracy on the basis of its bomb tritium content if the unsaturated soil cover and the aquifer itself is sufficiently homogeneous. A few examples from the Rhine valley are presented. The decrease in tritium level from the water table to a few metres below is nearly two orders of magnitude. Agreement between the measured or estimated variation of bomb tritium in rain during the past decade and the tritium found in shallow groundwater can be obtained if one takes into account that (a) practically no summer rain reaches the water table, and (b) water is mixed by diffusion. Both effects can also be observed in the soil moisture of the unsaturated soil above the water table. Carbon-14 increase in groundwater due to bombs is delayed compared to tritium, the reasons being delay in the biological system and exchange with the carbonate in the soil. Nevertheless lysimeters show a marked increase of 14 C, which depends on the plant cover, being high in a plant-covered lysimeter and low in a bare one. A simple model is presented, which allows the evaluation of the influence of exchange on the 14 C age obtained. It turns out that the deviation from the true age depends on the ratio of the carbonate content in the aquifer material to the carbonate content of the water, on the specific contact surface or the grain size but not on the groundwater velocity. On the basis of this model the experimental finding that 14 C ages are usually in agreement with other age estimates despite the loss by exchange is plausible owing to the fact that only material of sufficiently coarse grain size can make up a reasonable aquifer. Assuming only exchange with a monomolecular surface layer of the carbonate grains one finds that the 14 C age is likely to differ by not more than a factor of two in the most unfavourable case. Under natural conditions (steady state of cosmic-ray-produced 14 C) the 14 C content of shallow groundwater is hardly influenced at

  12. High precision and stable structures for particle detectors

    CERN Document Server

    Da Mota Silva, S; Hauviller, Claude

    1999-01-01

    The central detectors used in High Energy Physics Experiments require the use of light and stable structures capable of supporting delicate and precise radiation detection elements. These structures need to be highly stable under environmental conditions where external vibrations, high radiation levels, temperature and humidity gradients should be taken into account. Their main design drivers are high dimension and dynamic stability, high stiffness to mass ratio and large radiation length. For most applications, these constraints lead us to choose Carbon Fiber Reinforced Plastics ( CFRP) as structural element. The construction of light and stable structures with CFRP for these applications can be achieved by careful design engineering and further confirmation at the prototyping phase. However, the experimental environment can influence their characteristics and behavior. In this case, theuse of adaptive structures could become a solution for this problem. We are studying structures in CFRP with bonded piezoel...

  13. SKLUST device for high-precision gluing of MWPC

    International Nuclear Information System (INIS)

    Amaglobeli, N.S.; Burov, R.V.; Sakandelidze, R.M.; Sakhelashvili, T.M.; Chiladze, B.G.; Glonti, G.L.; Glonti, L.N.

    2005-01-01

    The SKLUST device has been created for gluing precision plane-parallel anode, cathode of spacer bars and integral anode and cathode frames of the MWPCs or flat surfaces of the large-area cathode planes for them in the case that thin copper clad stesalit or glass-cloth-base laminate is used as the cathode, for example, for the CSC chambers. In contrast to usual gluing, in this device the glued components are not pressed to each other. SKLUST allows making high-precision products in laboratory conditions without preliminarily machining its components and receiving a precision article practically for any area at the plane parallelism from ±0.030 up to ±0.006 mm using a non-calibrated sheet of the foiled (or unfoiled) stesalit, glass-cloth-base laminate or other flexible materials to a tolerance for the thickness ±0.2-0.5 mm or worse. On the biggest of the existing devices it is possible to fabricate an article with the maximal sizes 2400x250 mm 2 at the thickness accuracy (6±0.015) mm (maximum deviation). Whereas in the technological cycle machining of blanks to the thickness or application of exact blanks is completely excluded, the manufacturing process becomes simpler, and the price of the articles essentially reduces, especially for mass production

  14. Feasibility studies of RFQ based 14C accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Guo Zhiyu; Liu Kexin; Yan Xueqing; Xie Yi; Fang Jiaxun; Chen Jiaer

    2007-01-01

    Electrostatic accelerators with terminal voltage less than 1 MeV have been successfully used for 14 C AMS. This contribution shows that a small RFQ accelerator may also be suitable for AMS 14 C measurements. A well-designed RFQ accelerator can realize a low energy spread and high isotopic selection with a length of less than 1 m and reasonable power consumption. Compared with small tandem accelerators, a RFQ does not need isolation gas and can accept much higher beam currents. Its stripper would be at ground potential and there would be no further acceleration after stripping, so the background from charge exchange processes should be lower. The RFQ design and system are described

  15. Precision Muon Tracking Detectors for High-Energy Hadron Colliders

    CERN Document Server

    Gadow, Philipp; Kroha, Hubert; Richter, Robert

    2016-01-01

    Small-diameter muon drift tube (sMDT) chambers with 15 mm tube diameter are a cost-effective technology for high-precision muon tracking over large areas at high background rates as expected at future high-energy hadron colliders including HL-LHC. The chamber design and construction procedures have been optimized for mass production and provide sense wire positioning accuracy of better than 10 ?m. The rate capability of the sMDT chambers has been extensively tested at the CERN Gamma Irradiation Facility. It exceeds the one of the ATLAS muon drift tube (MDT) chambers, which are operated at unprecedentedly high background rates of neutrons and gamma-rays, by an order of magnitude, which is sufficient for almost the whole muon detector acceptance at FCC-hh at maximum luminosity. sMDT operational and construction experience exists from ATLAS muon spectrometer upgrades which are in progress or under preparation for LHC Phase 1 and 2.

  16. High-precision micro/nano-scale machining system

    Science.gov (United States)

    Kapoor, Shiv G.; Bourne, Keith Allen; DeVor, Richard E.

    2014-08-19

    A high precision micro/nanoscale machining system. A multi-axis movement machine provides relative movement along multiple axes between a workpiece and a tool holder. A cutting tool is disposed on a flexible cantilever held by the tool holder, the tool holder being movable to provide at least two of the axes to set the angle and distance of the cutting tool relative to the workpiece. A feedback control system uses measurement of deflection of the cantilever during cutting to maintain a desired cantilever deflection and hence a desired load on the cutting tool.

  17. Future high precision experiments and new physics beyond Standard Model

    International Nuclear Information System (INIS)

    Luo, Mingxing.

    1993-01-01

    High precision (< 1%) electroweak experiments that have been done or are likely to be done in this decade are examined on the basis of Standard Model (SM) predictions of fourteen weak neutral current observables and fifteen W and Z properties to the one-loop level, the implications of the corresponding experimental measurements to various types of possible new physics that enter at the tree or loop level were investigated. Certain experiments appear to have special promise as probes of the new physics considered here

  18. Designing compensator of dual servo system for high precision positioning

    International Nuclear Information System (INIS)

    Choi, Hyeun Seok; Song, Chi Woo; Han, Chang Soo; Choi, Tae Hoon; Lee, Nak Kyu; Na, Kyung Hwan

    2003-01-01

    The high precision positioning mechanism is used in various industrial fields. It is used in semiconductor manufacturing line, test instrument, bioengineering, and MEMS and so on. This paper presents a positioning mechanism with dual servo system. Dual servo system consists of a coarse stage and a fine motion stage. The course stage is driven by VCM and the actuator of fine stage is the PZT. The purposes of dual servo system are stability, higher bandwidth, and robustness. Lead compensator is applied to this control system, and is designed by PQ method. Designed compensator can improve property of positioning mechanism

  19. Effect of level of dietary protein on the distribution of 14C-activity from exogenous 14C-inosine in chicks

    International Nuclear Information System (INIS)

    Masushige, Shoichi; Tadokoro, Tadahiro; Suzuki, Takao; Nakajima, Hisao.

    1983-01-01

    The effect of dietary protein level on the metabolic fate of intraperitoneally administered (exogeneous) 8- 14 C-inosine in chicks was studied. Three different protein level diets (low, standard and high) were prepared. Chicks were fed on these diets for 10 days, respectively and the following results were found: (1) RNA content of liver, small intestine and muscle in chicks fed on a low protein diet was decreased as compared to other diet groups, but no difference was observed in kidney or pancreas. (2) 14 C uptake by organs from exogeneous 8- 14 C-inosine was determined. The uptake of 14 C in kidney, pancreas and small intestine was higher than that in liver and muscle. Moreover, the uptake by tissues in the low protein groups was significantly higher than that in either the standard or high protein groups, but no difference was observed between these latter two groups. (3) The rate of incorporation of 14 C labelled purine by acid soluble materials and RNA was higher in kidney, pancreas and small intestine than in liver and muscle, and also higher in chicks fed on a low protein diet than in either the standard or high protein groups. (4) It was revealed that the 14 C-labelled purine rings from 8- 14 C-inosine were incorporated into AMP and GMP as constituents of RNA. (author)

  20. Simultaneous measurement of cholesterol 7 alpha-hydroxylase activity by reverse-phase high-performance liquid chromatography using both endogenous and exogenous [4-14C]cholesterol as substrate

    International Nuclear Information System (INIS)

    Hylemon, P.B.; Studer, E.J.; Pandak, W.M.; Heuman, D.M.; Vlahcevic, Z.R.; Chiang, J.Y.

    1989-01-01

    The HPLC-spectrophotometric method for measuring cholesterol 7 alpha-hydroxylase activity was modified by using a C-18 reverse-phase column to separate 7 alpha-hydroxy-4-cholesten-3-one and 4-cholesten-3-one and by adding 7 beta-hydroxycholesterol to each reaction mixture as an internal recovery standard. With this method, we were able to simultaneously measure cholesterol 7 alpha-hydroxylase activity using endogenous cholesterol and exogenous [4- 14 C]cholesterol as substrate. Rat liver cytosol differentially stimulated (286%) the 7 alpha-hydroxylation of exogenous [4- 14 C]-cholesterol. In contrast, total cholesterol 7 alpha-hydroxylase activity was stimulated only 35% by cytosol. This method should prove useful for studying mechanisms of cholesterol delivery to cholesterol 7 alpha-hydroxylase

  1. Precise muon drift tube detectors for high background rate conditions

    CERN Document Server

    Engl, Albert; Dünnweber, Wolfgang

    The muon spectrometer of the ATLAS-experiment at the Large H adron Collider consists of drift tube chambers, which provide the precise m easurement of trajec- tories of traversing muons. In order to determine the moment um of the muons with high precision, the measurement of the position of the m uon in a single tube has to be more accurate than σ ≤ 100 m. The large cross section of proton-proton-collisions and th e high luminosity of the accelerator cause relevant background of neutrons and γ s in the muon spectrome- ter. During the next decade a luminosity upgrade [1] to 5 10 34 cm − 2 s − 1 is planned, which will increase the background counting rates consider ably. In this context this work deals with the further development of the existing drift chamber tech- nology to provide the required accuracy of the position meas urement under high background conditions. Two approaches of improving the dri ft tube chambers are described: • In regions of moderate background rates a faster and more lin ear ...

  2. Residues of 14C-paclobutrazol in mangoes

    International Nuclear Information System (INIS)

    Costa, Maria A.; Tornisielo, Valdemar L.; Castanho, Giuliane M.

    2009-01-01

    Paclobutrazol (PBZ) is a growth regulator used in agricultural systems whose purpose is the control of vegetative growth, stimulating the reproductive capacity of plants. This growth regulator remains active in soil for a long time and its half-life varies with the type of soil and climatic conditions, can severely affect the development of crops. This work aimed to study the residues / metabolites of 14 C-PBZ in mango pulp Tommy Atkins. The tests were performed with mangoes grown in pots stainless steel and application of 14 C-PBZ was performed by the soil projection of the crown, and the mangoes tested in two periods, one year and two years after application. To evaluate the levels of residues of 14 C-PBZ was realize the burning of 200 mg of pulp on biological oxidized and detached 14 CO 2 was detected by liquid scintillation spectrophotometer. The results were 1.65 % of residue of PBZ on fruit collected after two years of application and 4.30 % of residue of PBZ collected on fruit after a year of application and also can see that the product remained in the soil for more than one year, is translocated to the plant and reach the edible part, the pulp fruit. The identification of residual 14 C- PBZ/metabolites by thin-layer chromatography did not reveal any pattern of PBZ / metabolites due to the low activity detected in the samples. Therefore, another procedure was performed for extraction and then analyzed by high performance liquid chromatography (HPLC) for detection of metabolites in the PBZ of mango pulp. (author)

  3. Residues of {sup 14}C-paclobutrazol in mangoes

    Energy Technology Data Exchange (ETDEWEB)

    Costa, Maria A.; Tornisielo, Valdemar L.; Castanho, Giuliane M., E-mail: macosta@cena.usp.b [Centro de Energia Nuclear na Agricultura (CENA/USP), Piracicaba, SP (Brazil). Lab. de Ecotoxicologia

    2009-07-01

    Paclobutrazol (PBZ) is a growth regulator used in agricultural systems whose purpose is the control of vegetative growth, stimulating the reproductive capacity of plants. This growth regulator remains active in soil for a long time and its half-life varies with the type of soil and climatic conditions, can severely affect the development of crops. This work aimed to study the residues / metabolites of {sup 14}C-PBZ in mango pulp Tommy Atkins. The tests were performed with mangoes grown in pots stainless steel and application of {sup 14}C-PBZ was performed by the soil projection of the crown, and the mangoes tested in two periods, one year and two years after application. To evaluate the levels of residues of {sup 14}C-PBZ was realize the burning of 200 mg of pulp on biological oxidized and detached {sup 14}CO{sub 2} was detected by liquid scintillation spectrophotometer. The results were 1.65 % of residue of PBZ on fruit collected after two years of application and 4.30 % of residue of PBZ collected on fruit after a year of application and also can see that the product remained in the soil for more than one year, is translocated to the plant and reach the edible part, the pulp fruit. The identification of residual {sup 14}C- PBZ/metabolites by thin-layer chromatography did not reveal any pattern of PBZ / metabolites due to the low activity detected in the samples. Therefore, another procedure was performed for extraction and then analyzed by high performance liquid chromatography (HPLC) for detection of metabolites in the PBZ of mango pulp. (author)

  4. {sup 14}C content in aerosols in Mexico City

    Energy Technology Data Exchange (ETDEWEB)

    Gómez, V.; Solís, C.; Chávez, E.; Andrade, E.; Ortiz, M.E.; Huerta, A.; Aragón, J.; Rodríguez-Ceja, M. [Instituto de Física, Universidad Nacional Autónoma de México, Apartado Postal 20-364, México, D.F. 01000 (Mexico); Martínez, M.A. [Facultad de Ciencias, Universidad Nacional Autónoma de México (Mexico); Ortiz, E. [Universidad Autónoma Metropolitana-Azcapotzalco, Av. San Pablo 180, C. P. 02200 México, D.F. (Mexico)

    2016-03-15

    {sup 14}C-AMS of total carbon was determined in aerosols (PM{sub 10} fraction), collected in Mexico City during two weeks from 21 November to 3 December 2012. Other tracers such as total carbon (TC), organic carbon (OC), elemental carbon (EC) and trace element contents were also determined. F{sup 14}C values varied from 0.39 to 0.48 with an average of 0.43. These values are slightly lower than those previously obtained for PM{sub 2.5} in 2003 and 2006 and reflect a high contribution of fossil CO{sub 2} to the carbonaceous matter in aerosols from Mexico City. In contrast, from 2006 to 2012 PM{sub 10} increased; EC, Ca, Ti and Fe concentrations remained constant, while OC, TC and K concentrations decreased. The use of potassium as an indicator of biomass burning showed that this source was negligible during this campaign. Combined analytical approaches allowed us to distinguish temporal variations of anthropogenic and natural inputs to the F{sup 14}C.

  5. Behaviour of 14C-DDT in Sudan Gezira soil

    International Nuclear Information System (INIS)

    Abdalla, A.M.; El-Zorgani, G.A.

    1988-01-01

    Field cylinders as described in the model experiment for determination of 14 C-DDT in Sudan Gezira soil were prepared and samples were collected for determination of 14 C-activity at various intervals. About 83-87% of the applied radioactivity was recovered in the extracts from the top 10 cm layer of soil. The loss rate of the chemical from soil increased with time apparently by volatilization and thermal degradation due to high soil temperature, intensive solar radiation and low soil organic matter. This resulted in a half-life of approx. 5 weeks. The major part of the chemical and possible metabolites were detected in the top 10 cm layer. Approximately 8-10% of the applied 14 C was detected in samples collected after 16-20 weeks. TLC and autoradiography indicated the presence of p,p'-DDT and p,p'-DDE as the major metabolite. Also traces of TDE were detected in some samples. These results showed that under Sudanese tropical conditions, DDT dissipates very rapidly in soils compared to dissipation in temperate regions. (author). 6 refs, 2 tabs

  6. METABOLISM OF [14C]GA19 AND [14C]GA53 BY ECOTYPES OF ...

    African Journals Online (AJOL)

    ADMIN

    hand, metabolism of [14C]GA53 was very limited in all day-length treatments and during both, day and night periods. ... compounds which are formed by covalent coupling of GAs to .... For each ecotype day-time and night-time metabolism of ...

  7. Synthesis of [methyl-14C]crotonobetaine from DL-[methyl-14C]carnitine

    International Nuclear Information System (INIS)

    Loester, H.; Seim, H.

    1996-01-01

    The causes of carnitine deficiency syndromes are not completely understood, but decomposition of L-carnitine in vivo is likely to be involved. Carnitine is metabolized to γ-butyrobetaine, and crotonobetaine is probably an intermediate in this pathway. To validate experimentally the precursor-product relationship between the three physiologically occuring γ-betaines - L-carnitine, crotonobetaine, γ-butyrobetaine - labelling with stable or radioactive isotopes became necessary. Methyl-labelled carnitine isomers (L(-)-, D(+)- or DL-) or γ-butyrobetaine can be easily synthesized by methylation of 4-amino-3-hydroxybutyric acid isomers or 4-aminobutyric acid, respectively. Because of problems with the 4-aminocrotonic acid, we synthesized labelled crotonbetaine from labelled carnitine. Thus, DL-[methyl- 14 C]carnitine was dehydrated by reaction with concentrated sulfuric acid. After removal of the latter the products were separated and purified by ion exchange chromatography on DOWEX 50 WX8 (200 - 400 mesh) and gradient elution with hydrochloric acid. In addition to the labelled main product [methyl- 14 C]crotonobetaine (yield about 50 %), [methyl- 14 C]glycine betaine and [methyl- 14 C]acetonyl-trimethylammonium (ATMA) were formed. The end products were identified by combined thin layer chromatography/autoradiography and quantified by liquid scintillation counting. (Author)

  8. Synthesis of ethanol {sup 14}C-1; Synthese d'ethanol {sup 14}C-1

    Energy Technology Data Exchange (ETDEWEB)

    Wolff, R E; Pichat, L [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    The direct reduction by LiAlH{sub 4}, of a suspension of anhydrous sodium acetate in tetra-hydro-furfuryl-oxy-tetra-hydro-pyran is described. This study has shown that the ethanol thus obtained is impure and that the yields are erratic. On the contrary the reduction of acetyl chloride 1-{sup 14}C by LiAlH{sub 4}, in 'diethyl carbitol' leads to ethanol 1-{sup 14}C of satisfactory purity with a yield of about 71 percent. (author) [French] Une etude de la reduction directe par LiAlH{sub 4}, de l'acetate de soude anhydre en suspension dans le tetrahydrofurfuryloxytetrahydropyrane est decrite. Cette etude a montre que l'on obtient de l'ethanol souille d'impuretes, avec un rendement variable. Par contre, la reduction du chlorure d'acetyle {sup 14}C-1 par LiAlH{sub 4}, dans le 'diethyl carbitol' conduit a l'ethanol {sup 14}C-1 de purete convenable avec un rendement de l'ordre de 71 pour cent. (auteur)

  9. A critical review of atmospheric 14 C activities

    International Nuclear Information System (INIS)

    Krajcar Bronic, I.; Horvatincic, N.; Baresic, J.; Obelic, B.; Vreca, P.

    2006-01-01

    14 C activity of atmospheric CO 2 has been measured at the Rudjer Boskovi Institute as a part of environmental monitoring in order to determine possible differences between clean-air sites, industrialized city and sites in the vicinity of nuclear power plant. Samples of CO 2 from the atmosphere have been collected by absorption of CO 2 on the saturated carbonate-free NaOH solution for a period of 1 month under stationary conditions. The obtained Na 2 CO 3 has been dissolved in HCl and the produced CO 2 used for CH 4 preparation by catalytic reaction with H 2 at 450 degrees Celsius. A gas proportional counter filled with CH 4 has been used for 14 C activity measurement. The method of collection of CO 2 does not require any power source and can be therefore used for sampling at the remote sites, such as mountains or forests. However,due to the lack of mixing of the Na OH solution, the absorption process is limited on the surface of the solution, and there exists the possibility of fractionation of carbon isotopes due to different reaction rate constants of 12 C and 13 C. A continuous record of atmospheric 14 CO 2 activity exists for the city of Zagreb (1986 to 2005), while shorter records (1-2 years) exist for several other sites of various characteristics: two clean-air sites (Mt. Medvednica, altitude about 1000 m a.s.l., for period 1995 to 1996, and the Plitvice National Park for period 2003 to 2005), and a site close to the Nuclear Power Plant Krsko (1984 to 1986).Within the bilateral Croatian-Slovene project we have recently measured also the stable isotope composition (δ13 C) of Na 2 CO 3 collected at two different sampling sites in order to determine seasonal fluctuations in both 14 C and 13 C isotope composition. Unexpectedly low δ13 C values have been obtained about (-25±2)0/00 instead of expected (-7±1)0/00. Such low values have been attributed to the carbon isotope fractionation during the CO 2 absorption on the highly alkaline medium because of

  10. Electromagnetic Charge Radius of the Pion at High Precision

    Science.gov (United States)

    Ananthanarayan, B.; Caprini, Irinel; Das, Diganta

    2017-09-01

    We present a determination of the pion charge radius from high precision data on the pion vector form factor from both timelike and spacelike regions, using a novel formalism based on analyticity and unitarity. At low energies, instead of the poorly known modulus of the form factor, we use its phase, known with high accuracy from Roy equations for π π elastic scattering via the Fermi-Watson theorem. We use also the values of the modulus at several higher timelike energies, where the data from e+e- annihilation and τ decay are mutually consistent, as well as the most recent measurements at spacelike momenta. The experimental uncertainties are implemented by Monte Carlo simulations. The results, which do not rely on a specific parametrization, are optimal for the given input information and do not depend on the unknown phase of the form factor above the first inelastic threshold. Our prediction for the charge radius of the pion is rπ=(0.657 ±0.003 ) fm , which amounts to an increase in precision by a factor of about 2.7 compared to the Particle Data Group average.

  11. Present status and future aspects of highly precise radiotherapy

    International Nuclear Information System (INIS)

    Oita, Masataka; Takegawa, Yoshihiro; Maezawa, Hiroshi; Ikushima, Hitoshi; Osaki, Kyosuke; Nishitani, Hiromu

    2006-01-01

    This review describes about therapeutic equipments, irradiation technology, actual practice of highly precise radiotherapy (RT) and its tasks in future. Development of radiation equipments has made the therapy highly precise. At present, there are reportedly 836 linacs and 23 microtrons in Japan (March, 2005), most of which are computerized, new generation equipments. Image-guided RT, CT-linac system, real-time tumor-tracking RT (RTRT), tomotherapy and cyberknife are introduced owing to development of concerned devices and equipments. In addition, there are 7 facilities with proton and/or heavy ion beams. In parallel with the machine development above, irradiation has become to that from 2D to 3D by multi-gate technique with use of multi-leaf collimator and intensity-modulated RT is introduced. RTRT is an example of 4D RT. Practically, stereotactic irradiation (STI) to brain tumor has resulted in 1-year cumulative survival rate of 58% in 16 cases (23 foci, median size 1.2 cm and volume 0.57 ml) with median dose of 21.0 Gy in authors' hospital. STI in the early stage lung cancers is also practically conducted without severe adverse effects. Future tasks involve the further development of irradiation techniques and RT planning, QA/QC system, and raising of experts in related fields, which is a national problem. (T.I.)

  12. Dynamics of High-Speed Precision Geared Rotor Systems

    Directory of Open Access Journals (Sweden)

    Lim Teik C.

    2014-07-01

    Full Text Available Gears are one of the most widely applied precision machine elements in power transmission systems employed in automotive, aerospace, marine, rail and industrial applications because of their reliability, precision, efficiency and versatility. Fundamentally, gears provide a very practical mechanism to transmit motion and mechanical power between two rotating shafts. However, their performance and accuracy are often hampered by tooth failure, vibrations and whine noise. This is most acute in high-speed, high power density geared rotor systems, which is the primary scope of this paper. The present study focuses on the development of a gear pair mathematical model for use to analyze the dynamics of power transmission systems. The theory includes the gear mesh representation derived from results of the quasi-static tooth contact analysis. This proposed gear mesh theory comprising of transmission error, mesh point, mesh stiffness and line-of-action nonlinear, time-varying parameters can be easily incorporated into a variety of transmission system models ranging from the lumped parameter type to detailed finite element representation. The gear dynamic analysis performed led to the discovery of the out-of-phase gear pair torsion modes that are responsible for much of the mechanical problems seen in gearing applications. The paper concludes with a discussion on effectual design approaches to minimize the influence of gear dynamics and to mitigate gear failure in practical power transmission systems.

  13. Evidence of 11-year solar cycles in tree rings from 1010 to 1110 AD – Progress on high precision AMS measurements

    International Nuclear Information System (INIS)

    Güttler, D.; Wacker, L.; Kromer, B.; Friedrich, M.; Synal, H.-A.

    2013-01-01

    Oak tree rings from Southern Germany covering the AD 1010–1110 years have been analyzed for radiocarbon with accelerator mass spectrometry (AMS) at the laboratory at ETH Zurich. High-precision measurements with a precision down to 12 years radiocarbon age and a time resolution of 2 years aimed to identify modulations of the 14 C concentration in tree ring samples caused by the 11 years solar cycles, a feature that so far is not visible in the IntCal calibration curve. Our results are in good agreement with the current calibration curve IntCal09. However, we observed an offset in radiocarbon age of 25–40 years towards older values. An evaluation of our sample preparation, that included variations of e.g.: chemicals, test glasses and processing steps did not explain this offset. The numerous measurements using the AMS-MICADAS system validated its suitability for high precision measurements with high repeatability.

  14. Application of Alkenone 14C-Based chronostratigraphy in carbonate barren sediments on the Peru Margin.

    Science.gov (United States)

    Higginson, M. J.; Altabet, M. A.; Herbert, T. D.

    2003-04-01

    Despite the availability of high-quality sediment cores in key locations, little paleoclimatic information exists for the Peru margin largely because poor carbonate preservation severely restricts the use of traditional carbonate-based proxies for stratigraphy, dating, and paleo-environmental reconstruction. Many sites also include hiatuses produced by the variable influence of undercurrents on sediment accumulation. To overcome these difficulties, we have developed (in collaboration with T. Eglinton, WHOI) a laboratory facility to successfully extract and purify haptophyte-derived alkenones for compound specific 14C AMS dating (modified from OHKOUCHI et al., 2002). This avoids potential problems with dating bulk organic carbon which we assume, even in an upwelling environment as highly productive as the Peru margin, is not a priori solely of marine origin. In a recently collected, mid-Peru Margin core (ODP Leg 201 Site 1228D), comparison of our alkenone 14C dates with bulk sediment organic carbon dates and known stratigraphic markers produces a very well constrained, curvilinear age-depth relationship for at least the last 14 Kyr. A discrete ash layer at Site 1228D with an adjacent alkenone 14C age of 3890 ± 350 yr, is within error identical to the 14C age of a prominent ash layer (3800 ± 50 yr) found west of the large Peruvian El Misti volcano (16^o18'S, 71^o24'W). In summary, these results show that the Peru margin alkenones are autochthonous (i.e. not from an older, distant source) and provide sufficient dating precision to permit, for the first time, high-resolution paleoceanographic studies in this highly important marine province. Based upon this new chronology, synchronous changes in alkenone-derived SST estimates in two of our independently-dated records are the first to record at high-resolution (a) a large LGM-Holocene SST range in the Tropics (up to 7.8 ^oC during brief events in this upwelling location); and (b) sharp coolings (4 ^oC) consistent with

  15. BEAMGAA. A chance for high precision analysis of big samples

    International Nuclear Information System (INIS)

    Goerner, W.; Berger, A.; Haase, O.; Segebade, Chr.; Alber, D.; Monse, G.

    2005-01-01

    In activation analysis of traces in small samples, the non-equivalence of the activating radiation doses of sample and calibration material gives rise to sometimes tolerable systematic errors. Conversely, analysis of major components usually demands high trueness and precision. To meet this, beam geometry activation analysis (BEAMGAA) procedures have been developed for instrumental photon (IPAA) and neutron activation analysis (INAA) in which the activating neutron/photon beam exhibits broad, flat-topped characteristics. This results in a very low lateral activating flux gradient compared to known radiation facilities, however, at significantly lower flux density. The axial flux gradient can be accounted for by a monitor-sample-monitor assembly. As a first approach, major components were determined in high purity substances as well as selenium in a cattle fodder additive. (author)

  16. The QCD coupling and parton distributions at high precision

    International Nuclear Information System (INIS)

    Bluemlein, Johannes

    2010-07-01

    A survey is given on the present status of the nucleon parton distributions and related precision calculations and precision measurements of the strong coupling constant α s (M 2 Z ). We also discuss the impact of these quantities on precision observables at hadron colliders. (orig.)

  17. The QCD coupling and parton distributions at high precision

    Energy Technology Data Exchange (ETDEWEB)

    Bluemlein, Johannes

    2010-07-15

    A survey is given on the present status of the nucleon parton distributions and related precision calculations and precision measurements of the strong coupling constant {alpha}{sub s}(M{sup 2}{sub Z}). We also discuss the impact of these quantities on precision observables at hadron colliders. (orig.)

  18. Observing exoplanet populations with high-precision astrometry

    Science.gov (United States)

    Sahlmann, Johannes

    2012-06-01

    This thesis deals with the application of the astrometry technique, consisting in measuring the position of a star in the plane of the sky, for the discovery and characterisation of extra-solar planets. It is feasible only with a very high measurement precision, which motivates the use of space observatories, the development of new ground-based astronomical instrumentation and of innovative data analysis methods: The study of Sun-like stars with substellar companions using CORALIE radial velocities and HIPPARCOS astrometry leads to the determination of the frequency of close brown dwarf companions and to the discovery of a dividing line between massive planets and brown dwarf companions; An observation campaign employing optical imaging with a very large telescope demonstrates sufficient astrometric precision to detect planets around ultra-cool dwarf stars and the first results of the survey are presented; Finally, the design and initial astrometric performance of PRIMA, ! a new dual-feed near-infrared interferometric observing facility for relative astrometry is presented.

  19. High precision isotopic ratio analysis of volatile metal chelates

    International Nuclear Information System (INIS)

    Hachey, D.L.; Blais, J.C.; Klein, P.D.

    1980-01-01

    High precision isotope ratio measurements have been made for a series of volatile alkaline earth and transition metal chelates using conventional GC/MS instrumentation. Electron ionization was used for alkaline earth chelates, whereas isobutane chemical ionization was used for transition metal studies. Natural isotopic abundances were determined for a series of Mg, Ca, Cr, Fe, Ni, Cu, Cd, and Zn chelates. Absolute accuracy ranged between 0.01 and 1.19 at. %. Absolute precision ranged between +-0.01-0.27 at. % (RSD +- 0.07-10.26%) for elements that contained as many as eight natural isotopes. Calibration curves were prepared using natural abundance metals and their enriched 50 Cr, 60 Ni, and 65 Cu isotopes covering the range 0.1-1010.7 at. % excess. A separate multiple isotope calibration curve was similarly prepared using enriched 60 Ni (0.02-2.15 at. % excess) and 62 Ni (0.23-18.5 at. % excess). The samples were analyzed by GC/CI/MS. Human plasma, containing enriched 26 Mg and 44 Ca, was analyzed by EI/MS. 1 figure, 5 tables

  20. HIGH PRECISION ROVIBRATIONAL SPECTROSCOPY OF OH{sup +}

    Energy Technology Data Exchange (ETDEWEB)

    Markus, Charles R.; Hodges, James N.; Perry, Adam J.; Kocheril, G. Stephen; McCall, Benjamin J. [Department of Chemistry, University of Illinois, Urbana, IL 61801 (United States); Müller, Holger S. P., E-mail: bjmccall@illinois.edu [I. Physikalisches Institut, Universität zu Köln, Zülpicher Str. 77, D-50937 Köln (Germany)

    2016-02-01

    The molecular ion OH{sup +} has long been known to be an important component of the interstellar medium. Its relative abundance can be used to indirectly measure cosmic ray ionization rates of hydrogen, and it is the first intermediate in the interstellar formation of water. To date, only a limited number of pure rotational transitions have been observed in the laboratory making it necessary to indirectly calculate rotational levels from high-precision rovibrational spectroscopy. We have remeasured 30 transitions in the fundamental band with MHz-level precision, in order to enable the prediction of a THz spectrum of OH{sup +}. The ions were produced in a water cooled discharge of O{sub 2}, H{sub 2}, and He, and the rovibrational transitions were measured with the technique Noise Immune Cavity Enhanced Optical Heterodyne Velocity Modulation Spectroscopy. These values have been included in a global fit of field free data to a {sup 3}Σ{sup −} linear molecule effective Hamiltonian to determine improved spectroscopic parameters which were used to predict the pure rotational transition frequencies.

  1. Ultracold Anions for High-Precision Antihydrogen Experiments.

    Science.gov (United States)

    Cerchiari, G; Kellerbauer, A; Safronova, M S; Safronova, U I; Yzombard, P

    2018-03-30

    Experiments with antihydrogen (H[over ¯]) for a study of matter-antimatter symmetry and antimatter gravity require ultracold H[over ¯] to reach ultimate precision. A promising path towards antiatoms much colder than a few kelvin involves the precooling of antiprotons by laser-cooled anions. Because of the weak binding of the valence electron in anions-dominated by polarization and correlation effects-only few candidate systems with suitable transitions exist. We report on a combination of experimental and theoretical studies to fully determine the relevant binding energies, transition rates, and branching ratios of the most promising candidate La^{-}. Using combined transverse and collinear laser spectroscopy, we determined the resonant frequency of the laser cooling transition to be ν=96.592 713(91)  THz and its transition rate to be A=4.90(50)×10^{4}  s^{-1}. Using a novel high-precision theoretical treatment of La^{-} we calculated yet unmeasured energy levels, transition rates, branching ratios, and lifetimes to complement experimental information on the laser cooling cycle of La^{-}. The new data establish the suitability of La^{-} for laser cooling and show that the cooling transition is significantly stronger than suggested by a previous theoretical study.

  2. Preparation of 14C-labelled poly(l-menthyl isopropenyl carbonates)

    International Nuclear Information System (INIS)

    Comes, R.A.; Grubbs, H.J.

    1981-01-01

    The synthesis of 14 C-labelled poly(l-menthyl isopropenyl carbonate) is described. Experimental conditions are included for incorporation of 14 C into each of the carbon atoms in the molecule. High pressure liquid chromatography conditions are given for separation and purification of the labelled intermediates. (author)

  3. 14C-urea breath test for the detection of Helicobacter pylori

    NARCIS (Netherlands)

    Veldhuyzen van Zanten, S. J.; Tytgat, K. M.; Hollingsworth, J.; Jalali, S.; Rshid, F. A.; Bowen, B. M.; Goldie, J.; Goodacre, R. L.; Riddell, R. H.; Hunt, R. H.

    1990-01-01

    The high urease activity of Helicobacter pylori can be used to detect this bacterium by noninvasive breath tests. We have developed a 14C-urea breath test which uses 5 microCi 14C with 50 mg nonradioactive urea. Breath samples are collected at baseline and every 30 min for 2 h. Our study compared

  4. /sup 14/C uncovers the past

    Energy Technology Data Exchange (ETDEWEB)

    1977-01-01

    Radiocarbon dating, a method of dating prehistoric remains that has been developed since the Second World War, is based on the fact that all organic matter contains a radioactive isotope of carbon -/sup 14/C- which, because it decays at a fixed rate, gives a good indication of the age of the substance. The CSIR's National Physical Research Laboratory entered the field of radio-carbon dating in 1967, when the Nature Isotopes Division was established. The division has become a world center of excellence and much has been done to clear up the chronology of southern African prehistory. It has been found, for instance, that anatomically modern man appeared in southern Africa some 40000 years earlier than in Europe, and that the Zimbabwe ruins were built mainly around the year 1350 AD. The radio-carbon method can also be used to determine the age and flow rate of underground water and the rate at which tracer gases dissolve in the oceans, i.e. the efficiency with which the oceans cleanse the atmosphere from pollutants.

  5. Developing and implementing a high precision setup system

    Science.gov (United States)

    Peng, Lee-Cheng

    The demand for high-precision radiotherapy (HPRT) was first implemented in stereotactic radiosurgery using a rigid, invasive stereotactic head frame. Fractionated stereotactic radiotherapy (SRT) with a frameless device was developed along a growing interest in sophisticated treatment with a tight margin and high-dose gradient. This dissertation establishes the complete management for HPRT in the process of frameless SRT, including image-guided localization, immobilization, and dose evaluation. The most ideal and precise positioning system can allow for ease of relocation, real-time patient movement assessment, high accuracy, and no additional dose in daily use. A new image-guided stereotactic positioning system (IGSPS), the Align RT3C 3D surface camera system (ART, VisionRT), which combines 3D surface images and uses a real-time tracking technique, was developed to ensure accurate positioning at the first place. The uncertainties of current optical tracking system, which causes patient discomfort due to additional bite plates using the dental impression technique and external markers, are found. The accuracy and feasibility of ART is validated by comparisons with the optical tracking and cone-beam computed tomography (CBCT) systems. Additionally, an effective daily quality assurance (QA) program for the linear accelerator and multiple IGSPSs is the most important factor to ensure system performance in daily use. Currently, systematic errors from the phantom variety and long measurement time caused by switching phantoms were discovered. We investigated the use of a commercially available daily QA device to improve the efficiency and thoroughness. Reasonable action level has been established by considering dosimetric relevance and clinic flow. As for intricate treatments, the effect of dose deviation caused by setup errors remains uncertain on tumor coverage and toxicity on OARs. The lack of adequate dosimetric simulations based on the true treatment coordinates from

  6. A high-precision system for conformal intracranial radiotherapy

    International Nuclear Information System (INIS)

    Tome, Wolfgang A.; Meeks, Sanford L.; Buatti, John M.; Bova, Francis J.; Friedman, William A.; Li Zuofeng

    2000-01-01

    Purpose: Currently, optimally precise delivery of intracranial radiotherapy is possible with stereotactic radiosurgery and fractionated stereotactic radiotherapy. We report on an optimally precise optically guided system for three-dimensional (3D) conformal radiotherapy using multiple noncoplanar fixed fields. Methods and Materials: The optically guided system detects infrared light emitting diodes (IRLEDs) attached to a custom bite plate linked to the patient's maxillary dentition. The IRLEDs are monitored by a commercially available stereo camera system, which is interfaced to a personal computer. An IRLED reference is established with the patient at the selected stereotactic isocenter, and the computer reports the patient's current position based on the location of the IRLEDs relative to this reference position. Using this readout from the computer, the patient may be dialed directly to the desired position in stereotactic space. The patient is localized on the first day and a reference file is established for 5 different couch positions. The patient's image data are then imported into a commercial convolution-based 3D radiotherapy planning system. The previously established isocenter and couch positions are then used as a template upon which to design a conformal 3D plan with maximum beam separation. Results: The use of the optically guided system in conjunction with noncoplanar radiotherapy treatment planning using fixed fields allows the generation of highly conformal treatment plans that exhibit a high degree of dose homogeneity and a steep dose gradient. To date, this approach has been used to treat 28 patients. Conclusion: Because IRLED technology improves the accuracy of patient localization relative to the linac isocenter and allows real-time monitoring of patient position, one can choose treatment-field margins that only account for beam penumbra and image resolution without adding margin to account for larger and poorly defined setup uncertainty. This

  7. Convenient synthesis of [2-{sup 14}C]-methylglyoxal bis(guanylhydrazone), [{sup 14}C]-mitoguazone

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, A.; Ellames, G.J. [Sterling Winthrop Research Centre, Alnwick (United Kingdom). Pharmaceuticals Research Div.

    1995-01-01

    [2-{sup 14}C]-Methylglyoxal bis(guanylhydrazone) dihydrochloride, [{sup 14}C]-mitoguazone has been prepared in three steps from potassium[1-{sup 14}C]-acetate in an overall radiochemical yield of 16%. The key steps in this procedure are the formation of the sodium salt of[acetone-2-{sup 14}C]-methylsulfinylacetone, and Pummerer rearrangement to the [{sup 14}C] labelled hermithioacetal, which is trapped with two equivalents of aminoguanidine to afford the desired [{sup 14}C]-mitoguazone. (Author).

  8. Transformation of the herbicide [14C]glufosinate in soils

    International Nuclear Information System (INIS)

    Smith, A.E.

    1989-01-01

    The degradation of 2 μg/g [ 14 C]glufosinate (DL-homoalan-4-ylmethylphosphinic acid) was studied in clay, clay loam, and sandy loam soils at 85% field capacity and at 20 degree C. Over a 4-week period the soils were extracted and analyzed for transformation products by radiochemical and gas chromatographic techniques. In all soils there was release of [ 14 C]carbon dioxide and formation of [ 14 C]-3-(hydroxymethylphosphinyl)propionic acid (MPPA) as major degradation products. Within 21 days, about 55% of the applied 14 C herbicide had been transformed to MPPA in the sandy loam and 19% to [ 14 C]carbon dioxide. After 28 days, approximately 45% of the 14 C herbicide had been transformed to MPPA in the clay and clay loam and 10% released as [ 14 C]carbon dioxide. At all samplings, other 14 C transformation products appeared to be insignificant

  9. Translocation and distribution of 14C-assimilation products in soybeans with different growth property

    International Nuclear Information System (INIS)

    Yoshida, Koichi; Gotoh, Kanji

    1975-01-01

    To 3 different kinds of soybeans, Tokachinagaha (Determinate), Koganejiro (Intermediate), and Harosoy (Indeterminate), 14 C was given at 3 stages of growth, namely, initial flowering, young pod development, and seed fattening periods. The 14 C assimilation efficiency, namely, the value of total 14 C assimilated divided by the area of the leaves which assimilated 14 C, was large when the leaf area was small. The value decreased with the increase of the leaf area. The rate of translocation of 14 C assimilation products was 20-50% in the period of initial flowering. The rate was highest in Tokachinagaha, followed by Koganejiro and Harosoy in this order. The difference was small in the period of young pod development. In the period of initial flowering, the distribution of 14 C to lower leaves and branches was high in Harosoy. In the period of young pod development, 30-40% of the assimilated 14 C was found in stems. This distribution is possibly due to temporary storage. In the period of seed fattening, 80-90% of the assimilated 14 C was present in pods and seeds. It was then concluded that the movement of assimilated products is high in the determinate type in the initial growth period. In the seed fattening period, the rate is high in the indeterminate type soy beans. (Fukutomi, T.)

  10. S-adenosyl-L-(l-14C)-homocysteine

    International Nuclear Information System (INIS)

    Thomas, H.J.; Montgomery, J.A.

    1987-01-01

    S-Adenosyl-L-(1- 14 C)-homocysteine was prepared from commercially available L-(1- 14 C)-methionine by conversion first to S-benzyl-L-(1- 14 C)-homocysteine which upon treatment with sodium in liquid ammonia gave the disodium salt of L-(1- 14 C)-homocysteine. Reaction of this sodium salt with 5'-O-tosyladenosine gave the title compound. (author)

  11. Precision Viticulture from Multitemporal, Multispectral Very High Resolution Satellite Data

    Science.gov (United States)

    Kandylakis, Z.; Karantzalos, K.

    2016-06-01

    In order to exploit efficiently very high resolution satellite multispectral data for precision agriculture applications, validated methodologies should be established which link the observed reflectance spectra with certain crop/plant/fruit biophysical and biochemical quality parameters. To this end, based on concurrent satellite and field campaigns during the veraison period, satellite and in-situ data were collected, along with several grape samples, at specific locations during the harvesting period. These data were collected for a period of three years in two viticultural areas in Northern Greece. After the required data pre-processing, canopy reflectance observations, through the combination of several vegetation indices were correlated with the quantitative results from the grape/must analysis of grape sampling. Results appear quite promising, indicating that certain key quality parameters (like brix levels, total phenolic content, brix to total acidity, anthocyanin levels) which describe the oenological potential, phenolic composition and chromatic characteristics can be efficiently estimated from the satellite data.

  12. Thermal-mechanical behavior of high precision composite mirrors

    Science.gov (United States)

    Kuo, C. P.; Lou, M. C.; Rapp, D.

    1993-01-01

    Composite mirror panels were designed, constructed, analyzed, and tested in the framework of a NASA precision segmented reflector task. The deformations of the reflector surface during the exposure to space enviroments were predicted using a finite element model. The composite mirror panels have graphite-epoxy or graphite-cyanate facesheets, separated by an aluminum or a composite honeycomb core. It is pointed out that in order to carry out detailed modeling of composite mirrors with high accuracy, it is necessary to have temperature dependent properties of the materials involved and the type and magnitude of manufacturing errors and material nonuniformities. The structural modeling and analysis efforts addressed the impact of key design and materials parameters on the performance of mirrors.

  13. Thermal-mechanical behavior of high precision composite mirrors

    Energy Technology Data Exchange (ETDEWEB)

    Kuo, C.P.; Lou, M.C.; Rapp, D.

    1993-01-01

    Composite mirror panels were designed, constructed, analyzed, and tested in the framework of a NASA precision segmented reflector task. The deformations of the reflector surface during the exposure to space enviroments were predicted using a finite element model. The composite mirror panels have graphite-epoxy or graphite-cyanate facesheets, separated by an aluminum or a composite honeycomb core. It is pointed out that in order to carry out detailed modeling of composite mirrors with high accuracy, it is necessary to have temperature dependent properties of the materials involved and the type and magnitude of manufacturing errors and material nonuniformities. The structural modeling and analysis efforts addressed the impact of key design and materials parameters on the performance of mirrors. 4 refs.

  14. High precision measurements of 26Naβ- decay

    Science.gov (United States)

    Grinyer, G. F.; Svensson, C. E.; Andreoiu, C.; Andreyev, A. N.; Austin, R. A.; Ball, G. C.; Chakrawarthy, R. S.; Finlay, P.; Garrett, P. E.; Hackman, G.; Hardy, J. C.; Hyland, B.; Iacob, V. E.; Koopmans, K. A.; Kulp, W. D.; Leslie, J. R.; MacDonald, J. A.; Morton, A. C.; Ormand, W. E.; Osborne, C. J.; Pearson, C. J.; Phillips, A. A.; Sarazin, F.; Schumaker, M. A.; Scraggs, H. C.; Schwarzenberg, J.; Smith, M. B.; Valiente-Dobón, J. J.; Waddington, J. C.; Wood, J. L.; Zganjar, E. F.

    2005-04-01

    High-precision measurements of the half-life and β-branching ratios for the β- decay of 26Na to 26Mg have been measured in β-counting and γ-decay experiments, respectively. A 4π proportional counter and fast tape transport system were employed for the half-life measurement, whereas the γ rays emitted by the daughter nucleus 26Mg were detected with the 8π γ-ray spectrometer, both located at TRIUMF's isotope separator and accelerator radioactive beam facility. The half-life of 26Na was determined to be T1/2=1.07128±0.00013±0.00021s, where the first error is statistical and the second systematic. The logft values derived from these experiments are compared with theoretical values from a full sd-shell model calculation.

  15. The SFD - 80 M high precision double axis facing lathe

    International Nuclear Information System (INIS)

    Bran, T.; Dragomir, I.; Rusu, I.; Stanciu, S.; Niculceanu, F.; Nica, O.; Popescu, M.; Bailescu, V.; Burcea, Gh.; Turcanu, V.

    2001-01-01

    A high precision double axis facing lathe was designed for machining the 'final end-cup' by exterior conical lathing. The lathe is semi-automatic and includes two independent identical units. The general constructive, dimensional and functional characteristics are presented as well as the specific power consumptions. As compared to other machines able to perform the same operations this machine presents the following novel aspects: - it is dedicated from the design stage to the workpiece to be machined; - the splinting speed is quasi-constant all along the processing span (irrespective of the cutting diameter at which the tool is fixed, in its trajectory generating the exterior cone). At 100% and 80% nominal power values the yield is 240 workpiece/hour and 192 workpiece/hour, respectively

  16. High Precision Renormalization Group Study of the Roughening Transition

    CERN Document Server

    Hasenbusch, M; Pinn, K

    1994-01-01

    We confirm the Kosterlitz-Thouless scenario of the roughening transition for three different Solid-On-Solid models: the Discrete Gaussian model, the Absolute-Value-Solid-On-Solid model and the dual transform of the XY model with standard (cosine) action. The method is based on a matching of the renormalization group flow of the candidate models with the flow of a bona fide KT model, the exactly solvable BCSOS model. The Monte Carlo simulations are performed using efficient cluster algorithms. We obtain high precision estimates for the critical couplings and other non-universal quantities. For the XY model with cosine action our critical coupling estimate is $\\beta_R^{XY}=1.1197(5)$. For the roughening coupling of the Discrete Gaussian and the Absolute-Value-Solid-On-Solid model we find $K_R^{DG}=0.6645(6)$ and $K_R^{ASOS}=0.8061(3)$, respectively.

  17. Optimal dynamic performance for high-precision actuators/stages

    International Nuclear Information System (INIS)

    Preissner, C.; Lee, S.-H.; Royston, T. J.; Shu, D.

    2002-01-01

    System dynamic performance of actuator/stage groups, such as those found in optical instrument positioning systems and other high-precision applications, is dependent upon both individual component behavior and the system configuration. Experimental modal analysis techniques were implemented to determine the six degree of freedom stiffnesses and damping for individual actuator components. These experimental data were then used in a multibody dynamic computer model to investigate the effect of stage group configuration. Running the computer model through the possible stage configurations and observing the predicted vibratory response determined the optimal stage group configuration. Configuration optimization can be performed for any group of stages, provided there is stiffness and damping data available for the constituent pieces

  18. High Precision Infrared Temperature Measurement System Based on Distance Compensation

    Directory of Open Access Journals (Sweden)

    Chen Jing

    2017-01-01

    Full Text Available To meet the need of real-time remote monitoring of human body surface temperature for optical rehabilitation therapy, a non-contact high-precision real-time temperature measurement method based on distance compensation was proposed, and the system design was carried out. The microcontroller controls the infrared temperature measurement module and the laser range module to collect temperature and distance data. The compensation formula of temperature with distance wass fitted according to the least square method. Testing had been performed on different individuals to verify the accuracy of the system. The results indicate that the designed non-contact infrared temperature measurement system has a residual error of less than 0.2°C and the response time isless than 0.1s in the range of 0 to 60cm. This provides a reference for developing long-distance temperature measurement equipment in optical rehabilitation therapy.

  19. Absorption, Translocation and Metabolism of {sup 14}C-Labelled Dichlobenil

    Energy Technology Data Exchange (ETDEWEB)

    Pate, D. A.; Funderburk, Jr., H. H. [Auburn University Agricultural Experiment Station, Auburn, AL (United States)

    1966-05-15

    Autoradiographs of bean (Phaseolus vulgaris L.) and alligatorweed (Alternanthera philoxeroides (Mart.) Griseb.) indicated that {sup 14}C-nitrile-labelled dichlobenil (2,6-dichlorobenzonitrile) was slightly absorbed by the leaf and some translocation occurred following foliar application. Plants with roots submersed in radioactive aqueous solution absorbed and translocated the {sup 14}C throughout the plant. An investigation of some of the chemical and physical properties of {sup 14}C-nitrile-labelled dichlobenil was conducted. Loss because of volatilization from counting planchets was considerably reduced by application of acrylic plastic immediately after the solution dried. The plastic coating also eliminated contamination of counting chambers and windows. Two higher plants (bean and alligatorweed ) and four fungi (Fusarium sp., Geotrichum sp., Penicillium sp., Trichoderma sp.) were selected for metabolism studies. Dichlobenil- {sup 14}C was added to Hoagland and Arnon's nutrient solution containing beans or alligatorweed and to liquid cultures containing the other organisms for 12 to 120 h. Extracts from the plants or fungi were chromatographed on silica gel thin-layers. Autoradiographs of the thin-layer chromatographed aqueous extracts revealed a {sup C}-labelled compound of Rf 0.25 that differed from that of dichlobenil, which was 0.6. After esterification of the extracts, a {sup 14}C-labelled compound was observed at Rf 0.95 on thin-layer chromatograms. Chromatography of the unaltered extracts with 2,6- dichlorobenzoic acid revealed identical Rf-values. The esterified aqueous extracts chromatographed precisely with methyl-2,6-dichlorobenzoate. Gas chromatography of the {sup 14}C-labelled compound with an Rf of 0.95 exhibited a retention time identical to that of methyl-2,6-dichlorobenzoate. The quantity of {sup 14}C-labelled compound that chromatographed as 2,6-dichlorobenzoate increased with time of exposure of the various test organisms to dichlobenil {sup

  20. Autoradiographic disposition of [1-methyl-14C]- and [2-14C]caffeine in mice

    International Nuclear Information System (INIS)

    Lachance, M.P.; Marlowe, C.; Waddell, W.J.

    1983-01-01

    Male, C57B1/6J mice received either [1-methyl-14C]caffeine or [2-14C]caffeine via the tail vein at a dose of 0.7 or 11 mg/kg, respectively. At 0.1, 0.33, 1, 3, 9, and 24 hr after treatment, the mice were anesthetized with ether and frozen by immersion in dry ice/hexane. The mice were processed for whole-body autoradiography by the Ullberg technique; this procedure does not allow thawing or contact with solvents. All autoradiographs revealed some retention of radioactivity at early time intervals in the lacrimal glands, seminal vesicle fluid, nasal and olfactory epithelium, and retinal melanocytes. The remaining portion of the animal was densitometrically uniform except for the lower levels noted in the CNS and adipose tissues. Excretion of radioactivity by the liver and kidneys seems to be the major routes of elimination. Localization in the liver at late time intervals was confined principally to the centrilobular region. Late sites of retention, observed only after [1-methyl-14C]caffeine administration, included the pancreas, minor and major salivary glands, splenic red pulp, thymal cortex, bone marrow, and gastrointestinal epithelium. Sites of localization present in both studies included the olfactory epithelium, lacrimal glands, hair follicles, and retinal melanocytes. Further studies are needed to determine whether the localization at these various sites is due to metabolic degradation, active transport, or possibly a specific receptor interaction

  1. High precision measurements of the luminosity at LEP

    International Nuclear Information System (INIS)

    Pietrzyk, B.

    1994-01-01

    The art of the luminosity measurements at LEP is presented. First generation LEP detectors have measured the absolute luminosity with the precision of 0.3-0.5%. The most precise present detectors have reached the 0.07% precision and the 0.05% is not excluded in future. Center-of-mass energy dependent relative precision of the luminosity detectors and the use of the theoretical cross-section in the LEP experiments are also discussed. (author). 18 refs., 6 figs., 6 tabs

  2. Synthesis of /sup 14/C-labelled butoxyethoxyethanol

    Energy Technology Data Exchange (ETDEWEB)

    Thijssen, J.B.A.; Janssen, C.G.M.; Verluyten, W.L.M.; Heykants, J.J.P.

    1986-02-01

    Butoxyethoxyethanol, an organic solvent used as carrier in the levamisole pour-on formulation, was synthesized via a Makosza etherification of 1-/sup 14/C-labelled bromobutane with mono tetrahydropyranyl (T.H.P.) protected diethylene glycol and subsequent removal of the T.H.P. protecting group. The compounds' synthetic yield was 88.8%; it had a specific activity of 32.5 mCi/mmol. The reaction product was radiochemically pure (99.6%) according to high-performance liquid chromatography and thin-layer chromatography in three solvent systems.

  3. Electroweak precision tests in high-energy diboson processes

    Science.gov (United States)

    Franceschini, Roberto; Panico, Giuliano; Pomarol, Alex; Riva, Francesco; Wulzer, Andrea

    2018-02-01

    A promising avenue to perform precision tests of the SM at the LHC is to measure differential cross-sections at high invariant mass, exploiting in this way the growth with the energy of the corrections induced by heavy new physics. We classify the leading growing-with-energy effects in longitudinal diboson and in associated Higgs production processes, showing that they can be encapsulated in four real "high-energy primary" parameters. We assess the reach on these parameters at the LHC and at future hadronic colliders, focusing in particular on the fully leptonic W Z channel that appears particularly promising. The reach is found to be superior to existing constraints by one order of magnitude, providing a test of the SM electroweak sector at the per-mille level, in competition with LEP bounds. Unlike LHC run-1 bounds, which only apply to new physics effects that are much larger than the SM in the high-energy tail of the distributions, the probe we study applies to a wider class of new physics scenarios where such large departures are not expected.

  4. Precision, high dose radiotherapy: helium ion treatment of uveal melanoma

    Energy Technology Data Exchange (ETDEWEB)

    Saunders, W.M.; Char, D.H.; Quivey, J.M.; Castro, J.R.; Chen, G.T.Y.; Collier, J.M.; Cartigny, A.; Blakely, E.A.; Lyman, J.T.; Zink, S.R.

    1985-02-01

    The authors report on 75 patients with uveal melanoma who were treated by placing the Bragg peak of a helium ion beam over the tumor volume. The technique localizes the high dose region very tightly around the tumor volume. This allows critical structures, such as the optic disc and the macula, to be excluded from the high dose region as long as they are 3 to 4 mm away from the edge of the tumor. Careful attention to tumor localization, treatment planning, patient immobilization and treatment verification is required. With a mean follow-up of 22 months (3 to 60 months) the authors have had only five patients with a local recurrence, all of whom were salvaged with another treatment. Pretreatment visual acuity has generally been preserved as long as the tumor edge is at least 4 mm away from the macula and optic disc. The only serious complication to date has been an 18% incidence of neovascular glaucoma in the patients treated at our highest dose level. Clinical results and details of the technique are presented to illustrate potential clinical precision in administering high dose radiotherapy with charged particles such as helium ions or protons.

  5. Precision, high dose radiotherapy: helium ion treatment of uveal melanoma

    International Nuclear Information System (INIS)

    Saunders, W.M.; Char, D.H.; Quivey, J.M.

    1985-01-01

    The authors report on 75 patients with uveal melanoma who were treated by placing the Bragg peak of a helium ion beam over the tumor volume. The technique localizes the high dose region very tightly around the tumor volume. This allows critical structures, such as the optic disc and the macula, to be excluded from the high dose region as long as they are 3 to 4 mm away from the edge of the tumor. Careful attention to tumor localization, treatment planning, patient immobilization and treatment verification is required. With a mean follow-up of 22 months (3 to 60 months) the authors have had only five patients with a local recurrence, all of whom were salvaged with another treatment. Pretreatment visual acuity has generally been preserved as long as the tumor edge is at least 4 mm away from the macula and optic disc. The only serious complication to date has been an 18% incidence of neovascular glaucoma in the patients treated at our highest dose level. Clinical results and details of the technique are presented to illustrate potential clinical precision in administering high dose radiotherapy with charged particles such as helium ions or protons

  6. High-precision efficiency calibration of a high-purity co-axial germanium detector

    Energy Technology Data Exchange (ETDEWEB)

    Blank, B., E-mail: blank@cenbg.in2p3.fr [Centre d' Etudes Nucléaires de Bordeaux Gradignan, UMR 5797, CNRS/IN2P3, Université de Bordeaux, Chemin du Solarium, BP 120, 33175 Gradignan Cedex (France); Souin, J.; Ascher, P.; Audirac, L.; Canchel, G.; Gerbaux, M.; Grévy, S.; Giovinazzo, J.; Guérin, H.; Nieto, T. Kurtukian; Matea, I. [Centre d' Etudes Nucléaires de Bordeaux Gradignan, UMR 5797, CNRS/IN2P3, Université de Bordeaux, Chemin du Solarium, BP 120, 33175 Gradignan Cedex (France); Bouzomita, H.; Delahaye, P.; Grinyer, G.F.; Thomas, J.C. [Grand Accélérateur National d' Ions Lourds, CEA/DSM, CNRS/IN2P3, Bvd Henri Becquerel, BP 55027, F-14076 CAEN Cedex 5 (France)

    2015-03-11

    A high-purity co-axial germanium detector has been calibrated in efficiency to a precision of about 0.15% over a wide energy range. High-precision scans of the detector crystal and γ-ray source measurements have been compared to Monte-Carlo simulations to adjust the dimensions of a detector model. For this purpose, standard calibration sources and short-lived online sources have been used. The resulting efficiency calibration reaches the precision needed e.g. for branching ratio measurements of super-allowed β decays for tests of the weak-interaction standard model.

  7. {8-14C}-Adenine and {1-14C}-isopentenyl pyrophosphate - precursors for root-produced cytokinins in the tomato (Lycopersicon esculentum mill.)

    International Nuclear Information System (INIS)

    Dickinson, J.R.

    1985-01-01

    Following the detection of reasonable levels of biologically active cytokinin-like compounds in one-month-old tomato plants, the possible involvement of {8- 14 C}-adenine and {1- 14 C}-isopentenyl pyrophosphate in the biosynthetic pathway leading to an accumulation of free zeatin derivatives, was studied. Intact tomato plants were used for a time-course study involving the uptake of {8- 14 C}-adenine and the tentative identification of compounds into which the 14 C became incorporated. Using high performance liquid chromatography, radioactive trans-zeatin was identified as being present in the Dowex 50 root extract. The 12-hour time interval was used and the roots of the tomato plants were immersed in a more heavily radiolabelled medium. Modified separation techniques were used to achieve enhanced radioactivity recovery rates. This experiment demonstrated the presence of relatively high levels of tentatively identified radioactive zeatin in the Dowex 50 root and stem extracts. Radioactivity in the aqueous extracts was found not to be contributed by cytokinin nucleotides. A final experiment was carried out using decapitated root systems to determine if the root tissue alone could be implicated in the synthesis of cytokinins. Decapitated tomato root systems were supplied with either {8- 14 C}-adenine or {1- 14 C}-isopentenyl pyrophosphate. The ratio of incorporation of {1- 14 C}-isopentenyl pyrophosphate into identified cytokinins was higher than for {8- 14 C}-adenine. It was concluded that both adenine and isopentenyl pyrophosphate are involved in the biosynthetic pathway leading to an accumulation of free zeatin derivatives in tomato roots

  8. Synthesis of [methyl-[sup 14]C]-N-methylputrescine

    Energy Technology Data Exchange (ETDEWEB)

    Secor, H.V.; Izac, R.R.; Hassam, S.B.; Frisch, A.F. (Philip Morris Research Center, Richmond, VA (United States))

    1994-05-01

    [Methyl-[sup 14]C]-N-methylputrescine was prepared from [[sup 14]C]methylamine hydrochloride in five steps. Reaction of benzaldehyde and [[sup 14]C]methylamine (10 mCi) followed by catalytic hydrogenation yielded [methyl-[sup 14]C]-N-methylbenzylamine. The key step in this process is the alkylation of [methyl-[sup 14]C]-N-methylbenzylamine in aqueous medium with 4-bromobutyronitrile. The radiochemical purity of the final product after two successive catalytic hydrogenations was in excess of 97%. The radiochemical yields in two successive runs were 26 and 38%, based on starting [[sup 14]C]methylamine, with specific activities of 22 and 23 mCi/mmol, respectively. This sequence provides a convenient and efficient regioselective radiosynthesis of [methyl-[sup 14]C]-N-methylputrescine. (author).

  9. A Computer Controlled Precision High Pressure Measuring System

    Science.gov (United States)

    Sadana, S.; Yadav, S.; Jha, N.; Gupta, V. K.; Agarwal, R.; Bandyopadhyay, A. K.; Saxena, T. K.

    2011-01-01

    A microcontroller (AT89C51) based electronics has been designed and developed for high precision calibrator based on Digiquartz pressure transducer (DQPT) for the measurement of high hydrostatic pressure up to 275 MPa. The input signal from DQPT is converted into a square wave form and multiplied through frequency multiplier circuit over 10 times to input frequency. This input frequency is multiplied by a factor of ten using phased lock loop. Octal buffer is used to store the calculated frequency, which in turn is fed to microcontroller AT89C51 interfaced with a liquid crystal display for the display of frequency as well as corresponding pressure in user friendly units. The electronics developed is interfaced with a computer using RS232 for automatic data acquisition, computation and storage. The data is acquired by programming in Visual Basic 6.0. This system is interfaced with the PC to make it a computer controlled system. The system is capable of measuring the frequency up to 4 MHz with a resolution of 0.01 Hz and the pressure up to 275 MPa with a resolution of 0.001 MPa within measurement uncertainty of 0.025%. The details on the hardware of the pressure measuring system, associated electronics, software and calibration are discussed in this paper.

  10. A high-precision synchronization circuit for clock distribution

    International Nuclear Information System (INIS)

    Lu Chong; Tan Hongzhou; Duan Zhikui; Ding Yi

    2015-01-01

    In this paper, a novel structure of a high-precision synchronization circuit, HPSC, using interleaved delay units and a dynamic compensation circuit is proposed. HPSCs are designed for synchronization of clock distribution networks in large-scale integrated circuits, where high-quality clocks are required. The application of a hybrid structure of a coarse delay line and dynamic compensation circuit performs roughly the alignment of the clock signal in two clock cycles, and finishes the fine tuning in the next three clock cycles with the phase error suppressed under 3.8 ps. The proposed circuit is implemented and fabricated using a SMIC 0.13 μm 1P6M process with a supply voltage at 1.2 V. The allowed operation frequency ranges from 200 to 800 MHz, and the duty cycle ranges between [20%, 80%]. The active area of the core circuits is 245 × 134 μm 2 , and the power consumption is 1.64 mW at 500 MHz. (paper)

  11. Characterisation of work function fluctuations for high-precision experiments

    Energy Technology Data Exchange (ETDEWEB)

    Kahlenberg, Jan; Bickmann, Edward; Heil, Werner; Otten, Ernst W.; Schmidt, Christian; Wunderle, Alexander [Johannes Gutenberg-Universitaet Mainz (Germany); Babutzka, Martin; Schoenung, Kerstin [Karlsruher Institut fuer Technologie (Germany); Beck, Marcus [Johannes Gutenberg-Universitaet Mainz (Germany); Helmholtz-Institut Mainz (Germany)

    2016-07-01

    For a wide range of high-precision experiments in physics, well-defined electric potentials for achieving high measurement accuracies are required. An accurate determination of the electric potential is crucial for the measurement of the neutrino mass (KATRIN) as well as the measurement of the e{sup -} anti ν{sub e} correlation coefficient a in free neutron decay (aSPECT). Work function fluctuations on the electrodes lead to uncertainties in the distribution of the electric potential. For aSPECT, the electric potential has to be known at an accuracy of 10 mV. However, due to the patch effect of gold, work function fluctuations of several 100 meV can occur. Therefore, the work function distributions of the gold-plated electrodes have been measured using a Kelvin probe. Furthermore, the change of work function distributions over time as well as the influence of relative humidity on the work function measurement have been investigated. For aSPECT, the work function distributions of the gold-plated electrodes have been measured using a Kelvin probe. Due to the patch effect of gold, work function fluctuations of up to 160 meV occur. This would lead to a significant uncertainty of the potential barrier, which should be known at an accuracy of 10 mV. Furthermore, the change of work function distributions over time as well as the influence of relative humidity on the work function measurement have been investigated.

  12. Double labeling autoradiography. Cell kinetic studies with 3H- and 14C-thymidine

    International Nuclear Information System (INIS)

    Schultze, B.

    1981-01-01

    Examples of the multiple applicability of the double labeling method with 3 H- and 14 C-TdR are demonstrated. Double labeling with 3 H- and 14 C-TdR makes it possible to determine the cycle and its phases with high precision by modifying the usual percent labeled mitoses method with a single injection of 3 H-TdR. In addition, data is provided on the variances of the transit times through the cycle phases. For example, in the case of the jejunal crypt cells of the mouse, the transit times through successive cycle phases are uncorrelated. In the case of glial cells the double labeling method provides cell kinetic parameters despite the paucity of proliferating glial cells. In the adult untreated animal, glial cell mitoses are so rare that the percent labeled mitoses method can not be utilized. However, the S-phase duration can be measured by double labeling and the cycle time can be determined by the so-called method of labeled S phases. With the latter method the passage through the S phase of the 3 H-TdR-labeled S phase cells can be registered by injecting 14 C-TdR at different time intervals following 3 H-TdR application. In this way an S-phase duration of about 10 hr and a cycle time of about 20 hr was found for glial cells in the adult untreated mouse. An exchange of glial cells between the growth fraction and the nongrowth fraction has also been shown by double labeling. A quite different application of the double labeling method with 3H- and 14 C-TdR is the in vivo study of the cell cycle phase-specific effect of drugs used in chemotherapy of tumors. The effect of vincristine on these cells has been studied. Vincristine affects cells in S and G2 in such a manner that they are arrested during the next metaphase and subsequently become necrotic. It has no effect on G1 cells

  13. Precision cosmology with time delay lenses: high resolution imaging requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Xiao-Lei; Liao, Kai [Department of Astronomy, Beijing Normal University, 19 Xinjiekouwai Street, Beijing, 100875 (China); Treu, Tommaso; Agnello, Adriano [Department of Physics, University of California, Broida Hall, Santa Barbara, CA 93106 (United States); Auger, Matthew W. [Institute of Astronomy, University of Cambridge, Madingley Road, Cambridge CB3 0HA (United Kingdom); Marshall, Philip J., E-mail: xlmeng919@gmail.com, E-mail: tt@astro.ucla.edu, E-mail: aagnello@physics.ucsb.edu, E-mail: mauger@ast.cam.ac.uk, E-mail: liaokai@mail.bnu.edu.cn, E-mail: dr.phil.marshall@gmail.com [Kavli Institute for Particle Astrophysics and Cosmology, Stanford University, 452 Lomita Mall, Stanford, CA 94305 (United States)

    2015-09-01

    Lens time delays are a powerful probe of cosmology, provided that the gravitational potential of the main deflector can be modeled with sufficient precision. Recent work has shown that this can be achieved by detailed modeling of the host galaxies of lensed quasars, which appear as ''Einstein Rings'' in high resolution images. The distortion of these arcs and counter-arcs, as measured over a large number of pixels, provides tight constraints on the difference between the gravitational potential between the quasar image positions, and thus on cosmology in combination with the measured time delay. We carry out a systematic exploration of the high resolution imaging required to exploit the thousands of lensed quasars that will be discovered by current and upcoming surveys with the next decade. Specifically, we simulate realistic lens systems as imaged by the Hubble Space Telescope (HST), James Webb Space Telescope (JWST), and ground based adaptive optics images taken with Keck or the Thirty Meter Telescope (TMT). We compare the performance of these pointed observations with that of images taken by the Euclid (VIS), Wide-Field Infrared Survey Telescope (WFIRST) and Large Synoptic Survey Telescope (LSST) surveys. We use as our metric the precision with which the slope γ' of the total mass density profile ρ{sub tot}∝ r{sup −γ'} for the main deflector can be measured. Ideally, we require that the statistical error on γ' be less than 0.02, such that it is subdominant to other sources of random and systematic uncertainties. We find that survey data will likely have sufficient depth and resolution to meet the target only for the brighter gravitational lens systems, comparable to those discovered by the SDSS survey. For fainter systems, that will be discovered by current and future surveys, targeted follow-up will be required. However, the exposure time required with upcoming facilitites such as JWST, the Keck Next Generation

  14. High Precision Sunphotometer using Wide Dynamic Range (WDR) Camera Tracking

    Science.gov (United States)

    Liss, J.; Dunagan, S. E.; Johnson, R. R.; Chang, C. S.; LeBlanc, S. E.; Shinozuka, Y.; Redemann, J.; Flynn, C. J.; Segal-Rosenhaimer, M.; Pistone, K.; Kacenelenbogen, M. S.; Fahey, L.

    2016-12-01

    High Precision Sunphotometer using Wide Dynamic Range (WDR) Camera TrackingThe NASA Ames Sun-photometer-Satellite Group, DOE, PNNL Atmospheric Sciences and Global Change Division, and NASA Goddard's AERONET (AErosol RObotic NETwork) team recently collaborated on the development of a new airborne sunphotometry instrument that provides information on gases and aerosols extending far beyond what can be derived from discrete-channel direct-beam measurements, while preserving or enhancing many of the desirable AATS features (e.g., compactness, versatility, automation, reliability). The enhanced instrument combines the sun-tracking ability of the current 14-Channel NASA Ames AATS-14 with the sky-scanning ability of the ground-based AERONET Sun/sky photometers, while extending both AATS-14 and AERONET capabilities by providing full spectral information from the UV (350 nm) to the SWIR (1,700 nm). Strengths of this measurement approach include many more wavelengths (isolated from gas absorption features) that may be used to characterize aerosols and detailed (oversampled) measurements of the absorption features of specific gas constituents. The Sky Scanning Sun Tracking Airborne Radiometer (3STAR) replicates the radiometer functionality of the AATS-14 instrument but incorporates modern COTS technologies for all instruments subsystems. A 19-channel radiometer bundle design is borrowed from a commercial water column radiance instrument manufactured by Biospherical Instruments of San Diego California (ref, Morrow and Hooker)) and developed using NASA funds under the Small Business Innovative Research (SBIR) program. The 3STAR design also incorporates the latest in robotic motor technology embodied in Rotary actuators from Oriental motor Corp. having better than 15 arc seconds of positioning accuracy. Control system was designed, tested and simulated using a Hybrid-Dynamical modeling methodology. The design also replaces the classic quadrant detector tracking sensor with a

  15. Precision cosmology with time delay lenses: High resolution imaging requirements

    Energy Technology Data Exchange (ETDEWEB)

    Meng, Xiao -Lei [Beijing Normal Univ., Beijing (China); Univ. of California, Santa Barbara, CA (United States); Treu, Tommaso [Univ. of California, Santa Barbara, CA (United States); Univ. of California, Los Angeles, CA (United States); Agnello, Adriano [Univ. of California, Santa Barbara, CA (United States); Univ. of California, Los Angeles, CA (United States); Auger, Matthew W. [Univ. of Cambridge, Cambridge (United Kingdom); Liao, Kai [Beijing Normal Univ., Beijing (China); Univ. of California, Santa Barbara, CA (United States); Univ. of California, Los Angeles, CA (United States); Marshall, Philip J. [Stanford Univ., Stanford, CA (United States)

    2015-09-28

    Lens time delays are a powerful probe of cosmology, provided that the gravitational potential of the main deflector can be modeled with sufficient precision. Recent work has shown that this can be achieved by detailed modeling of the host galaxies of lensed quasars, which appear as ``Einstein Rings'' in high resolution images. The distortion of these arcs and counter-arcs, as measured over a large number of pixels, provides tight constraints on the difference between the gravitational potential between the quasar image positions, and thus on cosmology in combination with the measured time delay. We carry out a systematic exploration of the high resolution imaging required to exploit the thousands of lensed quasars that will be discovered by current and upcoming surveys with the next decade. Specifically, we simulate realistic lens systems as imaged by the Hubble Space Telescope (HST), James Webb Space Telescope (JWST), and ground based adaptive optics images taken with Keck or the Thirty Meter Telescope (TMT). We compare the performance of these pointed observations with that of images taken by the Euclid (VIS), Wide-Field Infrared Survey Telescope (WFIRST) and Large Synoptic Survey Telescope (LSST) surveys. We use as our metric the precision with which the slope γ' of the total mass density profile ρtot∝ r–γ' for the main deflector can be measured. Ideally, we require that the statistical error on γ' be less than 0.02, such that it is subdominant to other sources of random and systematic uncertainties. We find that survey data will likely have sufficient depth and resolution to meet the target only for the brighter gravitational lens systems, comparable to those discovered by the SDSS survey. For fainter systems, that will be discovered by current and future surveys, targeted follow-up will be required. Furthermore, the exposure time required with upcoming facilitites such as JWST, the Keck Next Generation Adaptive

  16. Human folate metabolism using 14C-accelerator mass spectrometry

    International Nuclear Information System (INIS)

    Arjomand, A; Bucholz, B A; Clifford, A J; Duecker, S R; Johnson, H; Schneider, P D; Zulim, R A.

    1999-01-01

    Folate is a water soluble vitamin required for optimal health, growth and development. It occurs naturally in various states of oxidation of the pteridine ring and with varying lengths to its glutamate chain. Folates function as one-carbon donors through methyl transferase catalyzed reactions. Low-folate diets, especially by those with suboptimal methyltransferase activity, are associated with increased risk of neural tube birth defects in children, hyperhomocysteinemic heart disease, and cancer in adults. Rapidly dividing (neoplastic) cells have a high folate need for DNA synthesis. Chemical analogs of folate (antifolates) that interfere with folate metabolism are used as therapeutic agents in cancer treatment. Although much is known about folate chemistry, metabolism of this vitamin in vivo in humans is not well understood. Since folate levels in blood and tissues are very low and methods to measure them are inadequate, the few previous studies that have examined folate metabolism used large doses of radiolabeled folic acid in patients with Hodgkins disease and cancer (Butterworth et al. 1969, Krumdieck et al. 1978). A subsequent protocol using deuterated folic acid was also insufficiently sensitive to trace a physiologic folate dose (Stites et al. 1997). Accelerator mass spectrometry (AMS) is an emerging bioanalytical tool that overcomes the limitations of traditional mass spectrometry and of decay counting of long lived radioisotopes (Vogel et al. 1995). AMS can detect attomolar concentrations of 14 C in milligram-sized samples enabling in vivo radiotracer studies in healthy humans. We used AMS to study the metabolism of a physiologic 80 nmol oral dose of 14 C-folic acid (1/6 US RDA) by measuring the 14 C-folate levels in serial plasma, urine and feces samples taken over a 150-day period after dosing a healthy adult volunteer

  17. High-precision laser microcutting and laser microdrilling using diffractive beam-splitting and high-precision flexible beam alignment

    Science.gov (United States)

    Zibner, F.; Fornaroli, C.; Holtkamp, J.; Shachaf, Lior; Kaplan, Natan; Gillner, A.

    2017-08-01

    High-precision laser micro machining gains more importance in industrial applications every month. Optical systems like the helical optics offer highest quality together with controllable and adjustable drilling geometry, thus as taper angle, aspect ratio and heat effected zone. The helical optics is based on a rotating Dove-prism which is mounted in a hollow shaft engine together with other optical elements like wedge prisms and plane plates. Although the achieved quality can be interpreted as extremely high the low process efficiency is a main reason that this manufacturing technology has only limited demand within the industrial market. The objective of the research studies presented in this paper is to dramatically increase process efficiency as well as process flexibility. During the last years, the average power of commercial ultra-short pulsed laser sources has increased significantly. The efficient utilization of the high average laser power in the field of material processing requires an effective distribution of the laser power onto the work piece. One approach to increase the efficiency is the application of beam splitting devices to enable parallel processing. Multi beam processing is used to parallelize the fabrication of periodic structures as most application only require a partial amount of the emitted ultra-short pulsed laser power. In order to achieve highest flexibility while using multi beam processing the single beams are diverted and re-guided in a way that enables the opportunity to process with each partial beam on locally apart probes or semimanufactures.

  18. High Precision Current Control for the LHC Main Power Converters

    CERN Document Server

    Thiesen, H; Hudson, G; King, Q; Montabonnet, V; Nisbet, D; Page, S

    2010-01-01

    Since restarting at the end of 2009, the LHC has reached a new energy record in March 2010 with the two 3.5 TeV beams. To achieve the performance required for the good functioning of the accelerator, the currents in the main circuits (Main Bends and Main Quadrupoles) must be controlled with a higher precision than ever previously requested for a particle accelerator at CERN: a few parts per million (ppm) of nominal current. This paper describes the different challenges that were overcome to achieve the required precision for the current control of the main circuits. Precision tests performed during the hardware commissioning of the LHC illustrate this paper.

  19. A high precision semi-analytic mass function

    Energy Technology Data Exchange (ETDEWEB)

    Del Popolo, Antonino [Dipartimento di Fisica e Astronomia, University of Catania, Viale Andrea Doria 6, I-95125 Catania (Italy); Pace, Francesco [Jodrell Bank Centre for Astrophysics, School of Physics and Astronomy, The University of Manchester, Manchester, M13 9PL (United Kingdom); Le Delliou, Morgan, E-mail: adelpopolo@oact.inaf.it, E-mail: francesco.pace@manchester.ac.uk, E-mail: delliou@ift.unesp.br [Instituto de Física Teorica, Universidade Estadual de São Paulo (IFT-UNESP), Rua Dr. Bento Teobaldo Ferraz 271, Bloco 2—Barra Funda, 01140-070 São Paulo, SP Brazil (Brazil)

    2017-03-01

    In this paper, extending past works of Del Popolo, we show how a high precision mass function (MF) can be obtained using the excursion set approach and an improved barrier taking implicitly into account a non-zero cosmological constant, the angular momentum acquired by tidal interaction of proto-structures and dynamical friction. In the case of the ΛCDM paradigm, we find that our MF is in agreement at the 3% level to Klypin's Bolshoi simulation, in the mass range M {sub vir} = 5 × 10{sup 9} h {sup −1} M {sub ⊙}–−5 × 10{sup 14} h {sup −1} M {sub ⊙} and redshift range 0 ∼< z ∼< 10. For z = 0 we also compared our MF to several fitting formulae, and found in particular agreement with Bhattacharya's within 3% in the mass range 10{sup 12}–10{sup 16} h {sup −1} M {sub ⊙}. Moreover, we discuss our MF validity for different cosmologies.

  20. High precision relocation of earthquakes at Iliamna Volcano, Alaska

    Science.gov (United States)

    Statz-Boyer, P.; Thurber, C.; Pesicek, J.; Prejean, S.

    2009-01-01

    In August 1996, a period of elevated seismicity commenced beneath Iliamna Volcano, Alaska. This activity lasted until early 1997, consisted of over 3000 earthquakes, and was accompanied by elevated emissions of volcanic gases. No eruption occurred and seismicity returned to background levels where it has remained since. We use waveform alignment with bispectrum-verified cross-correlation and double-difference methods to relocate over 2000 earthquakes from 1996 to 2005 with high precision (~ 100??m). The results of this analysis greatly clarify the distribution of seismic activity, revealing distinct features previously hidden by location scatter. A set of linear earthquake clusters diverges upward and southward from the main group of earthquakes. The events in these linear clusters show a clear southward migration with time. We suggest that these earthquakes represent either a response to degassing of the magma body, circulation of fluids due to exsolution from magma or heating of ground water, or possibly the intrusion of new dikes beneath Iliamna's southern flank. In addition, we speculate that the deeper, somewhat diffuse cluster of seismicity near and south of Iliamna's summit indicates the presence of an underlying magma body between about 2 and 4??km depth below sea level, based on similar features found previously at several other Alaskan volcanoes. ?? 2009 Elsevier B.V.

  1. High precision refractometry based on Fresnel diffraction from phase plates.

    Science.gov (United States)

    Tavassoly, M Taghi; Naraghi, Roxana Rezvani; Nahal, Arashmid; Hassani, Khosrow

    2012-05-01

    When a transparent plane-parallel plate is illuminated at a boundary region by a monochromatic parallel beam of light, Fresnel diffraction occurs because of the abrupt change in phase imposed by the finite change in refractive index at the plate boundary. The visibility of the diffraction fringes varies periodically with changes in incident angle. The visibility period depends on the plate thickness and the refractive indices of the plate and the surrounding medium. Plotting the phase change versus incident angle or counting the visibility repetition in an incident-angle interval provides, for a given plate thickness, the refractive index of the plate very accurately. It is shown here that the refractive index of a plate can be determined without knowing the plate thickness. Therefore, the technique can be utilized for measuring plate thickness with high precision. In addition, by installing a plate with known refractive index in a rectangular cell filled with a liquid and following the described procedures, the refractive index of the liquid is obtained. The technique is applied to measure the refractive indices of a glass slide, distilled water, and ethanol. The potential and merits of the technique are also discussed.

  2. High-Precision Direct Mass Determination of Unstable Isotopes

    CERN Multimedia

    2002-01-01

    The extension of systematic high-precision measurements of the nuclear mass to nuclei far from the valley of $\\beta$ stability is of great interest in nuclear physics and astrophysics. The mass, or binding energy, is a fundamental gross property and a key input parameter for nuclear matter calculations. It is also a sensitive probe for collective and single-particle effects in nuclear structure. \\\\ \\\\ For such purposes, nuclear masses need to be known to an accuracy of about 10$^{-7}$ (i.e. $\\Delta$M~$\\leq$~10~keV for A~=~100). To resolve a particular mass from its nuclear isomers and isobars, resolving power of 10$^6$ are often required. To achieve this, the ions delivered by the on-line mass separator ISOLDE are confined in a Penning quadrupole trap. This trap is placed in the very homogeneous and stable magnetic field of a superconducting magnet. Here, the cyclotron frequency and hence the mass are determined. \\\\ \\\\ The first measurements using this new technique have been completed for a long chain of Cs ...

  3. Software Development of High-Precision Ephemerides of Solar System

    Directory of Open Access Journals (Sweden)

    Jong-Seob Shin

    1995-06-01

    Full Text Available We solved n-body problem about 9 plants, moon, and 4 minor planets with relativistic effect related to the basic equation of motion of the solar system. Perturbations including figure potential of the earth and the moon and solid earth tidal effect were considered on this relativistic equation of motion. The orientations employed precession and nutation for the earth, and lunar libration model with Eckert's lunar libration model based on J2000.0 were used for the moon. Finally, we developed heliocentric ecliptic position and velocity of each planet using this software package named the SSEG (Solar System Ephemerides Generator by long-term (more than 100 years simulation on CRAY-2S super computer, through testing each subroutine on personal computer and short-time (within 800days running on SUN3/280 workstation. Epoch of input data JD2440400.5 were adopted in order to compare our results to the data archived from JPL's DE200 by Standish and Newhall. Above equation of motion was integrated numerically having 1-day step-size interval through 40,000 days (about 110 years long as total computing interval. We obtained high-precision ephemerides of the planets with maximum error, less than ~2 x 10-8AU (≈±3km compared with DE200 data(except for mars and moon.

  4. Quantity of dates trumps quality of dates for dense Bayesian radiocarbon sediment chronologies - Gas ion source 14C dating instructed by simultaneous Bayesian accumulation rate modeling

    Science.gov (United States)

    Rosenheim, B. E.; Firesinger, D.; Roberts, M. L.; Burton, J. R.; Khan, N.; Moyer, R. P.

    2016-12-01

    Radiocarbon (14C) sediment core chronologies benefit from a high density of dates, even when precision of individual dates is sacrificed. This is demonstrated by a combined approach of rapid 14C analysis of CO2 gas generated from carbonates and organic material coupled with Bayesian statistical modeling. Analysis of 14C is facilitated by the gas ion source on the Continuous Flow Accelerator Mass Spectrometry (CFAMS) system at the Woods Hole Oceanographic Institution's National Ocean Sciences Accelerator Mass Spectrometry facility. This instrument is capable of producing a 14C determination of +/- 100 14C y precision every 4-5 minutes, with limited sample handling (dissolution of carbonates and/or combustion of organic carbon in evacuated containers). Rapid analysis allows over-preparation of samples to include replicates at each depth and/or comparison of different sample types at particular depths in a sediment or peat core. Analysis priority is given to depths that have the least chronologic precision as determined by Bayesian modeling of the chronology of calibrated ages. Use of such a statistical approach to determine the order in which samples are run ensures that the chronology constantly improves so long as material is available for the analysis of chronologic weak points. Ultimately, accuracy of the chronology is determined by the material that is actually being dated, and our combined approach allows testing of different constituents of the organic carbon pool and the carbonate minerals within a core. We will present preliminary results from a deep-sea sediment core abundant in deep-sea foraminifera as well as coastal wetland peat cores to demonstrate statistical improvements in sediment- and peat-core chronologies obtained by increasing the quantity and decreasing the quality of individual dates.

  5. Interferometric Star Tracker for High Precision Pointing, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — Optical Physics Company (OPC) proposes to adapt the precision star tracker it is currently developing under several DoD contracts for deep space lasercom beam...

  6. A Low-Cost, High-Precision Navigator, Phase II

    Data.gov (United States)

    National Aeronautics and Space Administration — Toyon Research Corporation proposes to develop and demonstrate a prototype low-cost precision navigation system using commercial-grade gyroscopes and accelerometers....

  7. French Meteor Network for High Precision Orbits of Meteoroids

    Science.gov (United States)

    Atreya, P.; Vaubaillon, J.; Colas, F.; Bouley, S.; Gaillard, B.; Sauli, I.; Kwon, M. K.

    2011-01-01

    There is a lack of precise meteoroids orbit from video observations as most of the meteor stations use off-the-shelf CCD cameras. Few meteoroids orbit with precise semi-major axis are available using film photographic method. Precise orbits are necessary to compute the dust flux in the Earth s vicinity, and to estimate the ejection time of the meteoroids accurately by comparing them with the theoretical evolution model. We investigate the use of large CCD sensors to observe multi-station meteors and to compute precise orbit of these meteoroids. An ideal spatial and temporal resolution to get an accuracy to those similar of photographic plates are discussed. Various problems faced due to the use of large CCD, such as increasing the spatial and the temporal resolution at the same time and computational problems in finding the meteor position are illustrated.

  8. Distribution of photosynthetically fixed 14C in perennial plant species of the northern Mojave Desert

    International Nuclear Information System (INIS)

    Wallace, A.; Cha, J.W.; Romney, E.M.

    1980-01-01

    The distribution of photosynthate among plant parts subsequent to its production is needed to fully understand behavior of vegetation in any ecosystem. The present study, undertaken primarily to obtain information on transport of assimilates into roots of desert vegetation, was conducted in the northern Mojave Desert, where the mean annual rainfall is about 10 cm. Shoots of Ambrosia dumosa (A. Gray) Payne plants were exposed to 14 CO 2 in 1971, and the distribution of 14 C in roots, stems, and leaves was subsequently measured at 1 week, 2 months, and 5 months. Only about 12 percent of the 14 C photosynthate was stored in the root. Much of that stored in stems was available for new leaf growth. Photosynthate was labeled with 14 C for 24 plants representing eight species in 1972. Results showed that after 127 days the mean percentage of 14 C in roots as compared with the estimate of that originally fixed was 11.8; the percentage in stems was 43.8. To check the validity of the 14 C data, root growth of eight perennial desert plants grown in the glasshouse was followed as plants increased in size. The mean percent of the whole plant that was root for eight species was 17.7 percent. The mean proportion of the increase in plant weights that went below ground for the eight species was 19.5 percent. This value is higher than the fraction of 14 C found below ground, and therefore the 14 C technique underestimates the movement of C to roots. Results of an experiment designed to test the value of the 14 C-pulse technique for determining current root growth for some perennial species from the desert indicated that the transition part of roots where root growth continued after exposure to 14 C was highly labeled. Old growth contained less 14 C than new growth

  9. Fate of 14C-labelled compounds in marine environment

    International Nuclear Information System (INIS)

    Kale, S.P.; Raghu, K.; Sherkhane, P.D.; Murthy, N.B.K.

    1999-01-01

    Model ecosystems have played an important role in predicting environmental behavior of agrochemicals. The microcosms used in these studies generally include soil units containing usual biotic components common for that ecosystem. In present studies, scope of two such ecosystems has been extended to study the fate of 14 C-labelled pesticides in marine environment. 14 C-labelled pesticides used in these studies were chlorpyrifos, DDT and HCH. Two systems were developed in laboratory simulating marine environment to study the fate of these pesticides. The first system was developed in an all glass aquarium tank with marine sediments, seawater, clams and algae and is referred to as marine ecosystem. The second system was developed to permit the total 14 C-mass balance studies. It contained marine sediments under moist (60% water holding capacity) or flooded conditions and it is referred to as continuous flow system. Fate of 14 C-DDT was studied in marine ecosystem while degradation of 14 C-chlorpyrifos and 14 C-HCH was studied in continuous flow system. 14 C-DDT did not bioaccumulate in clams while at the end of 60 days 50% of the applied 14 C-activity was present in sediment fraction of marine ecosystem. 14 C-HCH degradation showed about 22-26% mineralization while 45-55% of the applied activity was recovered as organic volatiles. No significant bound residues were formed. 14 C-chorpyrifos underwent considerable degradation in marine environment. TCP was the major degradation product. (author)

  10. Radio emission from Supernovae and High Precision Astrometry

    Science.gov (United States)

    Perez-Torres, M. A.

    1999-11-01

    The present thesis work makes contributions in two scientific fronts: differential astrometry over the largest angular scales ever attempted (approx. 15 arcdegrees) and numerical simulations of radio emission from very young supernovae. In the first part, we describe the results of the use of very-long-baseline interferometry (VLBI) in one experiment designed to measure with very high precision the angular distance between the radio sources 1150+812 (QSO) and 1803+784 (BL Lac). We observed the radio sources on 19 November 1993 using an intercontinental array of radio telescopes, which simultaneously recorded at 2.3 and 8.4 GHz. VLBI differential astrometry is capable, Nature allowing, of yielding source positions with precisions well below the milliarcsecond level. To achieve this precision, we first had to accurately model the rotation of the interferometric fringes via the most precise models of Earth Orientation Parameters (EOP; precession, polar motion and UT1, nutation). With this model, we successfully connected our phase delay data at both frequencies and, using difference astrometric techniques, determined the coordinates of 1803+784 relative to those of 1150+812-within the IERS reference frame--with an standard error of about 0.6 mas in each coordinate. We then corrected for several effects including propagation medium (mainly the atmosphere and ionosphere), and opacity and source-structure effects within the radio sources. We stress that our dual-frequency measurements allowed us to accurately subtract the ionosphere contribution from our data. We also used GPS-based TEC measurements to independently find the ionosphere contribution, and showed that these contributions agree with our dual-frequency measurements within about 2 standard deviations in the less favorables cases (the longest baselines), but are usually well within one standard deviation. Our estimates of the relative positions, whether using dual-frequency-based or GPS-based ionosphere

  11. Overcoming bioanalytical challenges in an Onglyza(®) intravenous [(14)C]microdose absolute bioavailability study with accelerator MS.

    Science.gov (United States)

    Xu, Xiaohui Sophia; Dueker, Stephen R; Christopher, Lisa J; Lohstroh, Pete N; Keung, Chi Fung Anther; Cao, Kai Kevin; Bonacorsi, Samuel J; Cojocaru, Laura; Shen, Jim X; Humphreys, W Griffith; Stouffer, Bruce; Arnold, Mark E

    2012-08-01

    An absolute bioavailability study that utilized an intravenous [(14)C]microdose was conducted for saxagliptin (Onglyza(®)), a marketed drug product for the treatment of Type 2 diabetes mellitus. Concentrations of [(14)C]saxagliptin were determined by accelerator MS (AMS) after protein precipitation, chromatographic separation by UPLC and analyte fraction collection. A series of investigative experiments were conducted to maximize the release of the drug from high-affinity receptors and nonspecific adsorption, and to determine a suitable quantitation range. A technique-appropriate validation demonstrated the accuracy, precision, specificity, stability and recovery of the AMS methodology across the concentration range of 0.025 to 15.0 dpm/ml (disintegration per minute per milliliter), the equivalent of 1.91-1144 pg/ml. Based on the study sample analysis, the mean absolute bioavailability of saxagliptin was 50% in the eight subjects with a CV of 6.6%. Incurred sample reanalysis data fell well within acceptable limits. This study demonstrated that the optimized sample pretreatment and chromatographic separation procedures were critical for the successful implementation of an UPLC plus AMS method for [(14)C]saxagliptin. The use of multiple-point standards are useful, particularly during method development and validation, to evaluate and correct for concentration-dependent recovery, if observed, and to monitor and control process loss and operational variations.

  12. Behaviour of 14C-sulfadiazine and 14C-difloxacin during manure storage

    International Nuclear Information System (INIS)

    Lamshoeft, Marc; Sukul, Premasis; Zuehlke, Sebastian; Spiteller, Michael

    2010-01-01

    The persistence of sulfadiazine, difloxacin, and their metabolites has been investigated in stored manure. The manure collected from sulfadiazine ( 14 C-SDZ) and difloxacin ( 14 C-DIF) treated pigs contained N-acetylsulfadiazine (Ac-SDZ), 4-hydroxy-SDZ (4-OH-SDZ), and sarafloxacin (SARA) as the main metabolites, respectively along with their parent compounds. Manures were stored separately at 10 o C and 20 o C at various moisture levels. About 96-99% of the radioactivity remained in extractable parent compounds and their metabolites after 150 d of storage. The formation of non-extractable residue and the rate of mineralization were both negligible in manure containing SDZ and DIF. During storage SDZ concentration increased as a result of the deacetylation of Ac-SDZ, whose concentration decreased proportionally. Hence the environmental effects may be underestimated if the parent compound alone is considered for environmental risk assessment. About 11% and 14% of 4-OH-SDZ were lost after 20 and 40 d of storage; thereafter its concentration increased relatively, highlighting hydroxylation of SDZ. DIF degraded very slowly (7% loss after 150 d) during the storage of manure; in contrast the concentration of SARA decreased rapidly (72-90% loss after 150 d). Dilution of manure and storage at higher temperatures for a reasonable period of time enhanced the rate of reactions of SDZ, DIF and their related metabolites.

  13. Disposition and metabolism of 14C citrinin in pregnant rats

    International Nuclear Information System (INIS)

    Reddy, R.V.; Hayes, A.W.; Berndt, W.O.

    1982-01-01

    Citrinin is a product of fungal metabolism capable of producing nephrotoxicity. Distribution, excretion and metabolism of ( 14 C) citrinin was studied in pregnant female rats after subcutaneous administration of 35 mg/kg on the 12th day of gestation. Elimination of ( 14 C) citrinin-derived radioactivity from plasma was biphasic. The half-lives of the rapid (α) and slower (β) plases of elimination were 1.95 h and 39.7 h, respectively. Approximately 74% of the radioactivity appeared in the urine in the first 24 h, with only 1.7% and 1.4% in the urine at 48 h 72 h, respectively. Fecal elimination accounted for 9.5%, 4.1% and 7.3% of the total radioactivity at each of these times. At least one metabolite of citrinin was demonstrable with high performance liquid chromatography (HPLC) of plasma extracts. Retention times for the parent compound and metabolite were 270 s and 175 s, respectively. The metabolite was more polar than the parent compound. At least 3 metabolites of citrinin were found in urine of the same rats. Retention times for two metabolites were 140 s and 180 s, with both metabolites more polar than the parent compound. Chromatograms of bile samples suggested at least one metabolite was present with a retention time of 140 s. Chromatograms of uterus extracts indicated the presence of one metabolite with a retention time of 180 s. Chromatograms of fetus extracts indicated that no metabolites of citrinin were present. (author)

  14. 14C Carbofuran residue in rice-fish ecosystem model

    International Nuclear Information System (INIS)

    Sumatra, M.; Soekarna, D.; Suhanda; Kuswadi, A.N.

    1988-01-01

    14-C-carbofuran in the form of 14-C-Furada 3G was applied with doses of 0, 2, and 4 g/m2 to a rice-fish ecosystem model consisting of water, soil, rice, plant, and fish (Cyprinus carpio) in tanks of the size 1 m length, 1 m width, and 0.5 m depth. 14-C-carbofuran was released from 14-C-Furadan 3G, entered into the water, absorbed by plant root, and then distributed into the whole plant. A part of the 14-C-carbofuran was absorbed and retained by soil. In both doses of 4 and 2 g/m2, the 14-C-Furadan 3G was toxic to Cyprinus carpio under this experiment condition. (author). 5 refs, 5 figs, 6 tabs

  15. High precision patterning of ITO using femtosecond laser annealing process

    International Nuclear Information System (INIS)

    Cheng, Chung-Wei; Lin, Cen-Ying

    2014-01-01

    Highlights: • We have reported a process of fabrication of crystalline indium tin oxide (c-ITO) patterns using femtosecond laser-induced crystallization with a Gaussian beam profile followed by chemical etching. • The experimental results have demonstrated that the ablation and crystallization threshold fluences of a-ITO thin film are well-defined, the line width of the c-ITO patterns is controllable. • Fast fabrication of the two parallel sub-micro (∼0.5 μm) c-ITO line patterns using a single femtosecond laser beam and a single scanning path can be achieved. • A long-length sub-micro c-ITO line pattern is fabricated, and the feasibility of fabricating c-ITO patterns is confirmed, which are expected to be used in micro-electronics devices. - Abstract: High precision patterning of crystalline indium tin oxide (c-ITO) patterns on amorphous ITO (a-ITO) thin films by femtosecond laser-induced crystallization with a Gaussian beam profile followed by chemical etching is demonstrated. In the proposed approach, the a-ITO thin film is selectively transformed into a c-ITO structure via a low heat affect zone and the well-defined thresholds (ablation and crystallization) supplied by the femtosecond laser pulse. The experimental results show that by careful control of the laser fluence above the crystallization threshold, c-ITO patterns with controllable line widths and ridge-free characteristics can be accomplished. By careful control of the laser fluence above the ablation threshold, fast fabrication of the two parallel sub-micro c-ITO line patterns using a single femtosecond laser beam and single scanning path can be achieved. Along-length sub-micro c-ITO line pattern is fabricated, and the feasibility of fabricating c-ITO patterns is confirmed, which are expected to be used in micro-electronics devices

  16. a High Precision dem Extraction Method Based on Insar Data

    Science.gov (United States)

    Wang, Xinshuang; Liu, Lingling; Shi, Xiaoliang; Huang, Xitao; Geng, Wei

    2018-04-01

    In the 13th Five-Year Plan for Geoinformatics Business, it is proposed that the new InSAR technology should be applied to surveying and mapping production, which will become the innovation driving force of geoinformatics industry. This paper will study closely around the new outline of surveying and mapping and then achieve the TerraSAR/TanDEM data of Bin County in Shaanxi Province in X band. The studying steps are as follows; Firstly, the baseline is estimated from the orbital data; Secondly, the interferometric pairs of SAR image are accurately registered; Thirdly, the interferogram is generated; Fourth, the interferometric correlation information is estimated and the flat-earth phase is removed. In order to solve the phase noise and the discontinuity phase existing in the interferometric image of phase, a GAMMA adaptive filtering method is adopted. Aiming at the "hole" problem of missing data in low coherent area, the interpolation method of low coherent area mask is used to assist the phase unwrapping. Then, the accuracy of the interferometric baseline is estimated from the ground control points. Finally, 1 : 50000 DEM is generated, and the existing DEM data is used to verify the accuracy through statistical analysis. The research results show that the improved InSAR data processing method in this paper can obtain the high-precision DEM of the study area, exactly the same with the topography of reference DEM. The R2 can reach to 0.9648, showing a strong positive correlation.

  17. Transfer of 14C to prenatal and neonatal rats from their mothers exposed to 14C compounds by ingestion

    International Nuclear Information System (INIS)

    Takeda, H.; Fuma, S.; Miyamoto, K.; Kuroda, N.; Inaba, J.

    2003-01-01

    The transfer of 14 C through placenta or milk was investigated and the radiation dose to fetal and newborn rats was estimated. Female rats at gestational stages or after delivery were exposed to 14 C in the form of sodium bicarbonate, thymidine and lysine by a single ingestion. Radioactivity in maternal tissues and conceptuses (placenta, fetal membrane and fetus) and in the newborn was determined at various times after ingestion. After exposure to these 14 C compounds, there was no significant difference between the 14 C concentration in the fetus and that in the maternal tissues, suggesting that the placenta has no effect in preventing or accelerating the placental transfer of 14 C. The concentration and content of 14 C in the fetus and newborn were, however, dependent on the chemical form of 14 C and on the prenatal or neonatal stage at the time of ingestion. The result of the dose estimation showed that 14 C-lysine gave significantly higher prenatal and neonatal doses than 14 C-sodium bicarbonate or 14 C-thymidine. (author)

  18. Confirmation of eradication of Helicobacter pylori infection by 14C-urea breath test

    International Nuclear Information System (INIS)

    Pathak, C.M.; Bhasin, D.K.; Sharma, B.C.; Roy, P.; Vaiphei, K.

    1998-01-01

    Helicobacter pylori (H. pylori) is a potent urease producer, a characteristic that has been exploited in the development of the 14 C-urea breath test (UBT). 14 C-UBT is being used as a highly reliable test for the diagnosis of H. pylori infection. There is paucity of reports on the utility of this test to confirm the H. pylori eradication after its treatment. The study was conducted to determine the utility of 14 C-UBT in confirming the eradication of H. pylori

  19. High Precision GNSS Guidance for Field Mobile Robots

    Directory of Open Access Journals (Sweden)

    Ladislav Jurišica

    2012-11-01

    Full Text Available In this paper, we discuss GNSS (Global Navigation Satellite System guidance for field mobile robots. Several GNSS systems and receivers, as well as multiple measurement methods and principles of GNSS systems are examined. We focus mainly on sources of errors and investigate diverse approaches for precise measuring and effective use of GNSS systems for real-time robot localization. The main body of the article compares two GNSS receivers and their measurement methods. We design, implement and evaluate several mathematical methods for precise robot localization.

  20. High precision ages from the Torres del Paine Intrusion, Chile

    Science.gov (United States)

    Michel, J.; Baumgartner, L.; Cosca, M.; Ovtcharova, M.; Putlitz, B.; Schaltegger, U.

    2006-12-01

    The upper crustal bimodal Torres del Paine Intrusion, southern Chile, consists of the lower Paine-Mafic- Complex and the upper Paine-Granite. Geochronologically this bimodal complex is not well studied except for a few existing data from Halpern (1973) and Sanchez (2006). The aim of this study is to supplement the existing data and to constrain the age relations between the major magmatic pulses by applying high precision U-Pb dating on accessory zircons and 40Ar/39Ar-laser-step-heating-ages on biotites from the Torres del Paine Intrusion. The magmatic rocks from mafic complex are fine to medium-grained and vary in composition from quartz- monzonites to granodiorites and gabbros. Coarse-grained olivine gabbros have intruded these rocks in the west. The granitic body is represented by a peraluminous, biotite-orthoclase-granite and a more evolved leucocratic granite in the outer parts towards the host-rock. Field observations suggest a feeder-zone for the granite in the west and that the granite postdates the mafic complex. Two granite samples of the outermost margins in the Northeast and South were analyzed. The zircons were dated by precise isotope-dilution U-Pb techniques of chemically abraded single grains. The data are concordant within the analytical error and define weighted mean 206/238U ages of 12.59 ± 0.03 Ma and 12.58 ± 0.01 Ma for the two samples respectively. A 40Ar/39Ar-age for the second sample yield a date of 12.37 ± 0.11 Ma. Three 40Ar/39Ar -ages of biotites were obtained for rocks belonging to the mafic complex. A hbl-bio- granodiorite from the central part, approximately 150 m below the subhorizontal contact with the granite, gives an age of 12.81 ± 0.11 Ma. A hbl-bio-granodiorite and an olivine-gabbro west of the feeder-zone date at 12.42 ± 0.14 Ma and 12.49 ± 0.11 Ma, respectively. The obtained older age of 12.81 Ma for the granodiorite in the central part is consistent with structural relationships of brittle fracturing of the mafic

  1. Turnover of 14C-glucose in soils and its relationship with soil characters

    International Nuclear Information System (INIS)

    Ni Jinzhi; Xu Jianmin; Xie Zhengmiao; Ye Qingfu

    2001-01-01

    The turnover of 14 C-glucose added in 13 soils was studied. The turnover rate of 14 C-glucose can be divided into three phases: 0 - 3d, 3 - 28d and 28 - 294d. The range of the turnover rate and half -life of 14 C-glucose were 1.3 x 10 -1 - 2.5 x 10 -1 d -1 and 3 - 5d, 0.7x 10 -2 - 1.2 x 10 -2 d -1 and 58 - 97d, 0.5 x 10 -3 - 1.4 x 10 -3 d -1 and 491 - 1504d, respectively. Correlation analysis showed that from 0 to 3 days the turnover rate of 14 C-glucose had significant positive correlation with soil qCO 2 , from 3 to 28 days, the turnover rate of 14 C-glucose had no significant correlation with soil physico-chemical and biological properties. The turnover rate of 14 C-glucose had significant or highly significant negative correlation with soil total organic carbon, total nitrogen, CEC and significant positive correlation with soil sand content during the period from 28 to 294 days. Turnover of 14 C-glucose during the third period has close correlation with soil properties

  2. A study on alfalfa-dodder relationships by 14C-sucrose incorporation in their tissues

    International Nuclear Information System (INIS)

    Tsenova, M.

    1975-01-01

    Plant-parasite relationships between lesser-dodder (Cuscuta epithymum) and alfalfa (Medicago sativa) are investigated. 14 C-sucrose was incorporated via the cut stems of host and parasite into their tissues and the content of the free sugars, keto acids and free amino acids are determined. 14 C-sucrose was introduced also in lesser-dodder previously taken from the host-plant and immersed directly into radioactive sucrose. It is shown that the parasite intensively absorbs sucrose from the host-plant tissues using it as a source of energy and as a substrat for different synthetic processes. In the case when the parasite was previously taken away from the host-plant 14 C-sucrose taken up directly from the solution was used for the synthesis of various compounds (carbohydrates, amino- and keto acids). The suggestion was made that the respective enzyme systems are present in dodder tissues. The 14 C-glucose and 14 C-fructose content is an evidence for high invertase hydrolytic activity. The presence of 14 C-keto acids shows that the 14 C-sucrose incorporated in lesser-dodder tissues without the mediation of the host-plant was used as a respiratory substrate by the degradation following Krebs cycle. (author)

  3. Percutaneous absorption of [14C]DDT and [14C]benzo[a]pyrene from soil

    International Nuclear Information System (INIS)

    Wester, R.C.; Maibach, H.I.; Bucks, D.A.; Sedik, L.; Melendres, J.; Liao, C.; DiZio, S.

    1990-01-01

    The objective was to determine percutaneous absorption of DDT and benzo[a]pyrene in vitro and in vivo from soil into and through skin. Soil (Yolo County 65-California-57-8; 26% sand, 26% clay, 48% silt) was passed through 10-, 20-, and 48-mesh sieves. Soil then retained by 80-mesh was mixed with [14C]-labeled chemical at 10 ppm. Acetone solutions at 10 ppm were prepared for comparative analysis. Human cadaver skin was dermatomed to 500 microns and used in glass diffusion cells with human plasma as the receptor fluid (3 ml/hr flow rate) for a 24-hr skin application time. With acetone vehicle, DDT (18.1 +/- 13.4%) readily penetrated into human skin. Significantly less DDT (1.0 +/- 0.7%) penetrated into human skin from soil. DDT would not partition from human skin into human plasma in the receptor phase (less than 0.1%). With acetone vehicle, benzo[a]pyrene (23.7 +/- 9.7%) readily penetrated into human skin. Significantly less benzo[a]pyrene (1.4 +/- 0.9%) penetrated into human skin from soil. Benzo[a]pyrene would not partition from human skin into human plasma in the receptor phase (less than 0.1%). Substantivity (skin retention) was investigated by applying 14C-labeled chemical to human skin in vitro for only 25 min. After soap and water wash, 16.7 +/- 13.2% of DDT applied in acetone remained absorbed to skin. With soil only 0.25 +/- 0.11% of DDT remained absorbed to skin. After soap and water wash 5.1 +/- 2.1% of benzo[a]pyrene applied in acetone remained absorbed to skin. With soil only 0.14 +/- 0.13% of benzo[a]pyrene remained absorbed to skin

  4. The High Road to Astronomical Photometric Precision : Differential Photometry

    NARCIS (Netherlands)

    Milone, E. F.; Pel, Jan Willem

    2011-01-01

    Differential photometry offers the most precise method for measuring the brightness of astronomical objects. We attempt to demonstrate why this should be the case, and then describe how well it has been done through a review of the application of differential techniques from the earliest visual

  5. An Elementary Algorithm to Evaluate Trigonometric Functions to High Precision

    Science.gov (United States)

    Johansson, B. Tomas

    2018-01-01

    Evaluation of the cosine function is done via a simple Cordic-like algorithm, together with a package for handling arbitrary-precision arithmetic in the computer program Matlab. Approximations to the cosine function having hundreds of correct decimals are presented with a discussion around errors and implementation.

  6. Cognition-Based Approaches for High-Precision Text Mining

    Science.gov (United States)

    Shannon, George John

    2017-01-01

    This research improves the precision of information extraction from free-form text via the use of cognitive-based approaches to natural language processing (NLP). Cognitive-based approaches are an important, and relatively new, area of research in NLP and search, as well as linguistics. Cognitive approaches enable significant improvements in both…

  7. High Precision Clock Bias Prediction Model in Clock Synchronization System

    Directory of Open Access Journals (Sweden)

    Zan Liu

    2016-01-01

    Full Text Available Time synchronization is a fundamental requirement for many services provided by a distributed system. Clock calibration through the time signal is the usual way to realize the synchronization among the clocks used in the distributed system. The interference to time signal transmission or equipment failures may bring about failure to synchronize the time. To solve this problem, a clock bias prediction module is paralleled in the clock calibration system. And for improving the precision of clock bias prediction, the first-order grey model with one variable (GM(1,1 model is proposed. In the traditional GM(1,1 model, the combination of parameters determined by least squares criterion is not optimal; therefore, the particle swarm optimization (PSO is used to optimize GM(1,1 model. At the same time, in order to avoid PSO getting stuck at local optimization and improve its efficiency, the mechanisms that double subgroups and nonlinear decreasing inertia weight are proposed. In order to test the precision of the improved model, we design clock calibration experiments, where time signal is transferred via radio and wired channel, respectively. The improved model is built on the basis of clock bias acquired in the experiments. The results show that the improved model is superior to other models both in precision and in stability. The precision of improved model increased by 66.4%~76.7%.

  8. Overview of the JYFLTRAP mass measurements and high-precision ...

    Indian Academy of Sciences (India)

    nuclei, the mass difference can be determined with much higher precision than would normally be possible since for the mass doublets the systematic uncertainties become ..... The two-neutron separation energies in N = 60 indicate the. 338 ... Masses of zinc isotopes (Z = 30) were measured up to 80Zn, providing valuable.

  9. Root-uptake of {sup 14}C derived from acetic acid and {sup 14}C transfer to rice edible parts

    Energy Technology Data Exchange (ETDEWEB)

    Ogiyama, Shinichi [Office of Biospheric Assessment for Waste Disposal, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba-shi 263-8555 (Japan)], E-mail: ogiyama@nirs.go.jp; Suzuki, Hiroyuki [Graduate School of Pharmaceutical Sciences, Chiba University, 1-33 Yayoi-cho, Inage-ku, Chiba-shi 263-5522 (Japan); Inubushi, Kazuyuki [Graduate School of Horticulture, Chiba University, 648 Matsudo, Matsudo-shi 271-8510 (Japan); Takeda, Hiroshi; Uchida, Shigeo [Office of Biospheric Assessment for Waste Disposal, National Institute of Radiological Sciences, 4-9-1 Anagawa, Inage-ku, Chiba-shi 263-8555 (Japan)

    2010-02-15

    Three types of culture experiments using paddy rice (Oryza sativa L.) were performed to examine root-uptake of {sup 14}C in the form of acetic acid: double pot experiment (hydroponics), wet culture experiment (submerged sand medium), and chamber experiment (hydroponics and submerged sand medium). The {sup 14}C radioactivity in the plant, mediums, and atmospheric carbon dioxide ({sup 14}CO{sub 2}) in the chamber were determined, and the distribution of {sup 14}C in the plant was visualized using autoradiography. In the double pot experiment, the shoot of the plant and the lower root which was soaked in the culture solution had {sup 14}C radioactivity, but the upper root which did not have contact with the solution had none. There were also {sup 14}C radioactivity in the grains and roots in the wet culture experiment. Results of the chamber experiment showed that {sup 14}CO{sub 2} gas was released from the culture solution in both types of cultures. Results indicated that the {sup 14}C-acetic acid absorbed by rice plant through its root would be very small. Most of the {sup 14}C-acetic acid was transformed into gaseous forms either in the culture solution or rhizosphere. A relatively longer time would be needed to assimilate {sup 14}C derived from acetic acid to grain parts after it was once absorbed by the shoot through the root. Availability of {sup 14}C for the plant in sand culture was considered to be decreased compared with that for the plant in the hydroponics experiment. It was suggested that rice plant absorbed and assimilated {sup 14}C through the plant roots not because of uptake of {sup 14}C-acetic acid but because of uptake of {sup 14}C in gaseous forms such as {sup 14}CO{sub 2}.

  10. Metabolism of [ 14 C]GA 19 and [ 14 C]GA 53 by ecotypes of Betula ...

    African Journals Online (AJOL)

    Continuing with this line of research, we studied the metabolism of 14C-labelled GA19 and GA53. [14C]GA19 and [14C] A53 were applied to the apices of the northern ecotype (67º N) and to the leaves of the southern ecotype (64º N) of Betula pendula Roth. under different photoperiods and at different times in order to ...

  11. Root-uptake of 14C derived from acetic acid and 14C transfer to rice edible parts

    International Nuclear Information System (INIS)

    Ogiyama, Shinichi; Suzuki, Hiroyuki; Inubushi, Kazuyuki; Takeda, Hiroshi; Uchida, Shigeo

    2010-01-01

    Three types of culture experiments using paddy rice (Oryza sativa L.) were performed to examine root-uptake of 14 C in the form of acetic acid: double pot experiment (hydroponics), wet culture experiment (submerged sand medium), and chamber experiment (hydroponics and submerged sand medium). The 14 C radioactivity in the plant, mediums, and atmospheric carbon dioxide ( 14 CO 2 ) in the chamber were determined, and the distribution of 14 C in the plant was visualized using autoradiography. In the double pot experiment, the shoot of the plant and the lower root which was soaked in the culture solution had 14 C radioactivity, but the upper root which did not have contact with the solution had none. There were also 14 C radioactivity in the grains and roots in the wet culture experiment. Results of the chamber experiment showed that 14 CO 2 gas was released from the culture solution in both types of cultures. Results indicated that the 14 C-acetic acid absorbed by rice plant through its root would be very small. Most of the 14 C-acetic acid was transformed into gaseous forms either in the culture solution or rhizosphere. A relatively longer time would be needed to assimilate 14 C derived from acetic acid to grain parts after it was once absorbed by the shoot through the root. Availability of 14 C for the plant in sand culture was considered to be decreased compared with that for the plant in the hydroponics experiment. It was suggested that rice plant absorbed and assimilated 14 C through the plant roots not because of uptake of 14 C-acetic acid but because of uptake of 14 C in gaseous forms such as 14 CO 2 .

  12. Method of preparing D-mannose(U-14C) from glucons(U-14C) separated from natural material

    International Nuclear Information System (INIS)

    Kucar, S.; Zemek, J.; Bilik, V.; Kolina, J.

    1981-01-01

    Glucans(U- 14 C) separated from green or blue-green algae are hydrolysed using diluted mineral acids in the presence of small amounts of molybdate ions to D-glucose(U- 14 C) which, at a temperature of 60 to 100 degC epimerizes to D-mannose(U- 14 C). The epimeric aldoses are separated from the reaction mixture by paper chromatography. (H.S.)

  13. Influence of pesticide applications on degradation of the herbicide 14C - 2,4-D in different soils

    International Nuclear Information System (INIS)

    Marcondes, Marcilio Amaral

    2001-01-01

    Despite the importance of pesticide usage for the food production, its indiscriminate use may cause changes in the soil fertility, because pesticides influence soil microorganisms which are important for the biogeochemical cycles. The influence of applications of several pesticides, as recommended for cotton culture, was studied on the bioactivity of different soils (from Sao Paulo and Tatui, SP) by using radiometric techniques and a closed system for detection of bio mineralization of ''1 4 C-2,4-D ( 14 C-2,4-dichlorophenoxyacetic acid) and production of 14 C-volatile compounds. The 14 C-2,4-D dissipation under influence of other pesticide applications was also studied by determination of 14 C-extractable residues, 14 C-bound residues and qualitative and quantitative analysis of the 14 C-extractable residues by high pressure liquid chromatography (HPLC) and thin layer chromatography (TLC). 14 C-volatile compounds were never detected but increases and decreases of bio mineralization were detected in both soils after different treatments. The mixture of deltamethrin + methyl parathion increased significantly the bioactivity in both soils; nevertheless, monocrotophos did not have any influence. The applications of different pesticides have also influenced the 14 C-2,4-D dissipation, because the radiocarbon recovered as 14 C-extractable residues differed between the treated and untreated samples of both soils. On the other hand, the pesticide applications did not influence the production of 14 C-bound residues. This 14 C-residue was produced in larger amounts by the richest in organic matter soil (Sao Paulo). Although radiocarbon had been detected not only as 14 'C-2,4-D but also as a 14 C-metabolite, in both soils and treatments, results indicate that the ' 14 C-2,4-D dissipation varied in the two studied soils and was influenced by treatments with others pesticides. (author)

  14. Synthesis of [14C]-62514, a radiolabelled derivative of erythromycin A, via [2-14C]N,N-dimethylethylenediamine

    International Nuclear Information System (INIS)

    Surber, B.W.; Baker, W.R.; Seif, L.

    1991-01-01

    The synthesis of [ 14 C]A-62514, 11-deoxy-11[carboxy(2-dimethylamino-[1- 14 C]ethyl)amino]-6-0-methyl-e rythromycin A 11,12-(cyclic ester), was performed in five steps. The key intermediate, [2- 14 C]N,N-dimethylethyl-enediamine, was obtained in 80% yield by reacting Eschenmoser's salt with K 14 CN and reducing the resulting [1- 14 C]N,N-dimethylglycinonitrile with H 2 and Raney Ni in methanol and ammonium hydroxide. The final product was obtained 97% radiochemically pure in an overall radiochemical yield of 14%, with a specific activity of 39 mCi/mmol. (author)

  15. High precision measurement of the micro-imaging system to check repeatability of precision

    International Nuclear Information System (INIS)

    Cheng Lin; Song Li; Ma Chuntao; Luo Hongxin; Wang Jie

    2010-01-01

    The beamlines slits of Shanghai Synchrotron Radiation Facility (SSRF) are required to have a repeatability of better than 1 μm. Before the slits installation, the off-line and/or on-line repeatability measurements must be conducted. A machine vision measuring system based on high resolution CCD and adjustable high magnification lens was used in this regard. A multi-level filtering method was used to treat the imaging data. After image binarization, the imaging noises were depressed effectively by using of algebraic mean filtering, statistics median filtering,and the least square filtering. Using the subtracted image between the images before and after slit movement, an average displacement of slit blades could be obtained, and the repeatability of slit could be measured, with a resolution of 0.3 μm of the measurement system. The experimental results show that this measurement system meets the requirements for non-contact measurements to the repeatability of slits. (authors)

  16. Science that connects the past and the future. Fifty years of 14C dating

    International Nuclear Information System (INIS)

    Imamura, M.

    2006-01-01

    Major contribution of radiochemistry in archaeological sciences is the dating which provides the most essential information in studies of prehistory. In particular the method of 14 C dating revolutionized the theory of civilization in the world. In this talk I will review 50 years of 14 C dating, techniques and applications, and then the possibilities in contemporary world. The technical developments are featured by ultra-sensitive method of accelerator mass spectrometry in 1977 and its developments, and an introduction of international calibration datasets for 14 C dates started in 1986. Both contributed greatly to improvements in versatility and precision for dating. As for the applications, several interesting topics are reviewed such as the origin of agriculture and its propagation in the western world, the oldest pottery production in Japanese archipelago and its relation to world climate, paddy-rice agriculture and its propagation in Japanese archipelago. Since 14 C studies in nature is also well known as key information on carbon dynamics in earth's surface, it may be said that 14 C play an extraordinary role in understanding our past, present and the future. (author)

  17. Synthesis and characterization of 14C polyvinylphosphonic acid

    International Nuclear Information System (INIS)

    Stringer, O.D.; Charig, A.

    1989-01-01

    Ten mCi of 14 C ethylene was converted to 1.16 mCi of 14 C PVPA by oxidative phosphonation with phosphorus trichloride and molecular oxygen, dehydrohalogenation with triethylamine in ether, polymerization, and hydrolysis. The polymer had a specific activity of 12 uCi/mg and a radiochemical purity over 99%. (Author)

  18. Synthesis of /sup 14/C-labelled milrinone

    Energy Technology Data Exchange (ETDEWEB)

    Duncan, D.R.; Johnston, D.; Andrews, R.S. (Stirling-Winthrop, Alnwick (UK). Research and Development Div.)

    1985-02-01

    A synthetic procedure for producing /sup 14/C-labelled milrinone, a potent new cardiotonic agent, is described. The synthesis was achieved in two steps from 1-(4-pyridyl)propan-2-one utilising (2-/sup 14/C)cyanoacetamide as the source of the radiolabel. The overall chemical yield was 46% and the radiochemical yield 35%.

  19. Synthesis of specific labelled [methyl-14C]sarin

    International Nuclear Information System (INIS)

    Sin-Ren, A.C.; Riggio, G.; Hopff, W.H.; Waser, P.G.

    1988-01-01

    The synthesis of [methyl- 14 C]sarin ([ 14 C]methylphosphono-fluoridic acid 1-methylethyl ester) was accomplished by another approach as for nonlabelled sarin in a tele-conducted reaction vessel. The purity was estimated by IR, GC, and GC-MS and the stability in different media was examined. (author)

  20. Application of AMS 14C measurements to criminal investigations

    International Nuclear Information System (INIS)

    Nakamura, T.; Ohta, T.; Nishida, M.; Rakowski, A.; Ikeda, A.; Oda, H.; Kojima, S.

    2007-01-01

    14 C variations of atmospheric CO 2 as well as carbonaceous fraction of living materials, such as collagen from tooth and bone, tissue, skin, hair, nail, etc., of modern humans are influenced by 14 C produced artificially by nuclear bomb tests in the atmosphere from late 1950s to early 1960s. By careful investigation of 14 C concentration of tree rings and human body samples formed in this time intervals, we can establish a relationship of their 14 C concentrations with calendar year. By applying this relation to a sample whose 14 C concentration can be measured, we can estimate the formation age of the sample. In addition, sources of the chemicals that were used in some criminal cases can be possibly identified, by their carbon isotope ratios ( 13 C/ 12 C and 14 C/ 12 C). This method of age determination has been applied to a forensic study, i.e., two criminal cases of murder. For each case, by comparing the measured 14 C abundances of several pieces of hair and one tooth (the third molar) from the body with the annual change on concentrations of bomb-produced 14 C, the time of death of the body and the age of the victim were estimated. The estimated values were consistent with the real ones that were revealed by the confession of the real murderers. (author)

  1. The use of 14C ethanolamine as a precursor

    International Nuclear Information System (INIS)

    Madelmont, J.C.; Parry, D.; Godeneche, D.; Duprat, J.

    1985-01-01

    Two new 2 chloroethyl nitrosoureas were labelled on two positions by 14 C starting from Na 14 CN and using 14 C ethanolamine as intermediate, i.e. on the carbon 2 of the 2 chloro ethyl group and on the carbon 2 of the cysteamine part. (author)

  2. 14 C dating by using mass spectrometry with particle accelerator

    International Nuclear Information System (INIS)

    Santos, G.M.; Gomes, P.R.S.; Yokoyama, Y.; Tada, M.L. di; Cresswell, R.G.; Fifield, L.K.

    1999-01-01

    The different aspects concerning the 14 C dating are described, including the cosmogenic origin of 14 C, its production and absorption by matter, the procedures to be followed for the age determination and the associated errors, particularly by the Accelerator Mass Spectrometry (AMS) technique, and the different steps of the sample preparation process. (author)

  3. Advanced methods and algorithm for high precision astronomical imaging

    International Nuclear Information System (INIS)

    Ngole-Mboula, Fred-Maurice

    2016-01-01

    One of the biggest challenges of modern cosmology is to gain a more precise knowledge of the dark energy and the dark matter nature. Fortunately, the dark matter can be traced directly through its gravitational effect on galaxies shapes. The European Spatial Agency Euclid mission will precisely provide data for such a purpose. A critical step is analyzing these data will be to accurately model the instrument Point Spread Function (PSF), which the focus of this thesis.We developed non parametric methods to reliably estimate the PSFs across an instrument field-of-view, based on unresolved stars images and accounting for noise, under sampling and PSFs spatial variability. At the core of these contributions, modern mathematical tools and concepts such as sparsity. An important extension of this work will be to account for the PSFs wavelength dependency. (author) [fr

  4. ADVANCED DESIGN SOLUTIONS FOR HIGH-PRECISION WOODWORKING MACHINES

    Directory of Open Access Journals (Sweden)

    Giuseppe Lucisano

    2016-03-01

    Full Text Available With the aim at performing the highest precision during woodworking, a mix of alternative approaches, fruitfully integrated in a common design strategy, is essential. This paper represents an overview of technical solutions, recently developed by authors, in design of machine tools and their final effects on manufacturing. The most advanced solutions in machine design are reported side by side with common practices or little everyday expedients. These design actions are directly or indirectly related to the rational use of materials, sometimes very uncommon, as in the case of magnetorheological fluids chosen to implement an active control in speed and force on the electro-spindle, and permitting to improve the quality of wood machining. Other actions are less unusual, as in the case of the adoption of innovative anti-vibration supports for basement. Tradition or innovation, all these technical solutions contribute to the final result: the highest precision in wood machining.

  5. Fate of [14C]-zineb on lettuce plants

    International Nuclear Information System (INIS)

    Vonk, J.W.

    1976-01-01

    [1,2- 14 C]-zinc ethylenebisdithiocarbamate (zineb) was prepared and applied in droplets to leaves of lettuce plants. In aqueous suspension zineb decomposes mainly into ethylenethiourea (ETU) and 5,6-dihydro-3H-imidazo[2,1-C]-1,2,4-dithiazole-3-thione (DIDT). Lettuce plants were harvested 0,1,3,7,14 and 21 days after treatment and analysed. A high proportion of radioactivity remained on the surface of the plant and could be washed off. The following identified products were present: unchanged zineb, ETU, DIDT, 2-imidazoline and ethyleneurea. The ETU residue disappeared within 7 days, while 2-imidazoline and ethyleneurea were formed gradually. Radioactivity inside the plant consisted mostly of ethyleneurea: no ETU was present. (author)

  6. Carbonate as sputter target material for rapid {sup 14}C AMS

    Energy Technology Data Exchange (ETDEWEB)

    Longworth, Brett E., E-mail: blongworth@whoi.edu [Department of Geology and Geophysics, Woods Hole Oceanographic Institution, Woods Hole, MA (United States); Robinson, Laura F. [Department of Marine Chemistry and Geochemistry, Woods Hole Oceanographic Institution, Woods Hole, MA (United States); Roberts, Mark L.; Beaupre, Steven R.; Burke, Andrea [Department of Geology and Geophysics, Woods Hole Oceanographic Institution, Woods Hole, MA (United States); Jenkins, William J. [Department of Marine Chemistry and Geochemistry, Woods Hole Oceanographic Institution, Woods Hole, MA (United States)

    2013-01-15

    This paper describes a technique for measuring the {sup 14}C content of carbonate samples by producing C{sup -} ions directly in the negative ion sputter source of an accelerator mass spectrometer (AMS) system. This direct analysis of carbonate material eliminates the time and expense of graphite preparation. Powdered carbonate is mixed with titanium powder, loaded into a target cartridge, and compressed. Beam currents for optimally-sized carbonate targets (0.09-0.15 mg C) are typically 10-20% of those produced by optimally-sized graphite targets (0.5-1 mg C). Modern (>0.8 Fm) samples run by this method have standard deviations of 0.009 Fm or less, and near-modern samples run as unknowns agree with values from traditional hydrolysis/graphite to better than 2%. Targets with as little as 0.06 mg carbonate produce useable ion currents and results, albeit with increased error and larger blank. In its current state, direct sputtering is best applied to problems where a large number of analyses with lower precision are required. These applications could include age surveys of deep-sea corals for determination of historic population dynamics, to identify samples that would benefit from high precision analysis, and for growth rate studies of organisms forming carbonate skeletons.

  7. Oxidation of propionic acid-3-14C with alkaline permanganate

    International Nuclear Information System (INIS)

    Zielinski, M.

    1981-01-01

    The mechanism of oxidation of propionic acid with permanganate in alkaline medium was reinvestigated using methyl- 14 C labelled propionate. The preferential rupture of the αC-βC bond in propionate in highly concentrated alkaline solutions of NaOH (and KOH) was confirmed and the appearance of 14 C-labelled oxalate explained by the formation of the symmetrical intermediate which decomposes in two different modes. (author)

  8. Yale High Energy Physics Research: Precision Studies of Reactor Antineutrinos

    Energy Technology Data Exchange (ETDEWEB)

    Heeger, Karsten M. [Yale Univ., New Haven, CT (United States)

    2014-09-13

    This report presents experimental research at the intensity frontier of particle physics with particular focus on the study of reactor antineutrinos and the precision measurement of neutrino oscillations. The experimental neutrino physics group of Professor Heeger and Senior Scientist Band at Yale University has had leading responsibilities in the construction and operation of the Daya Bay Reactor Antineutrino Experiment and made critical contributions to the discovery of non-zero$\\theta_{13}$. Heeger and Band led the Daya Bay detector management team and are now overseeing the operations of the antineutrino detectors. Postdoctoral researchers and students in this group have made leading contributions to the Daya Bay analysis including the prediction of the reactor antineutrino flux and spectrum, the analysis of the oscillation signal, and the precision determination of the target mass yielding unprecedented precision in the relative detector uncertainty. Heeger's group is now leading an R\\&D effort towards a short-baseline oscillation experiment, called PROSPECT, at a US research reactor and the development of antineutrino detectors with advanced background discrimination.

  9. Yale High Energy Physics Research: Precision Studies of Reactor Antineutrinos

    International Nuclear Information System (INIS)

    Heeger, Karsten M.

    2014-01-01

    This report presents experimental research at the intensity frontier of particle physics with particular focus on the study of reactor antineutrinos and the precision measurement of neutrino oscillations. The experimental neutrino physics group of Professor Heeger and Senior Scientist Band at Yale University has had leading responsibilities in the construction and operation of the Daya Bay Reactor Antineutrino Experiment and made critical contributions to the discovery of non-zero$\\theta . Heeger and Band led the Daya Bay detector management team and are now overseeing the operations of the antineutrino detectors. Postdoctoral researchers and students in this group have made leading contributions to the Daya Bay analysis including the prediction of the reactor antineutrino flux and spectrum, the analysis of the oscillation signal, and the precision determination of the target mass yielding unprecedented precision in the relative detector uncertainty. Heeger's group is now leading an R\\&D effort towards a short-baseline oscillation experiment, called PROSPECT, at a US research reactor and the development of antineutrino detectors with advanced background discrimination.

  10. Removal of 14C from nitrogen annulus gas

    International Nuclear Information System (INIS)

    Cheh, C.H.

    1985-01-01

    A dry, ambient temperature process using Ca(OH) 2 as the sorbent to remove 14 CO 2 from moderator cover gas was further developed to remove 14 C from the extremely dry nitrogen annulus gas. Thermal gravimetric analysis was carried out to study the thermal stability of Ca(OH) 2 and the CO 2 -Ca(OH) 2 reaction at elevated temperatures under extremely low humidity conditions. Results shows that to achieve high utilization and avoid decomposition of Ca(OH) 2 , humidification of the annulus gas was necessary at high or low temperatures. Results of the bench scale (1-10 L/min) oxidizer study showed that, with 0.5% Pd or alumina as the catalyst, it was possible to achieve complete oxidation of CO and over 80% oxidation of CH 4 with 1% hydrogen in the nitrogen. The gas superficial velocity should be less than or equal to30 cm/s and the residence time greater than or equal to0.5 s. A pilot scale (up to 160 L/min) system including a catalytic oxidizer, a humidifier/demister, a Ca(OH) 2 reactor, a condenser/demister and regenerable molecular sieve dryers, was assembled and tested with simulated nitrogen annulus gas. Results showed that complete oxidation of the CO and 60-100% oxidation of the CH 4 with 0.5% H 2 in the simulated gas were achieved in the pilot plant. The CO 2 concentration was reduced from 30-60 μL/L at the inlet of the Ca(OH) 2 reactor to 1 μL/L or less at the outlet. After modifications of the dryer to overcome the problems encountered, the simulated annulus gas was dried to 0 C dew point before recirculation. Equipment specifications and operating conditions of a 14 C removal system for nitrogen annulus gas are summarized

  11. Behavior of 14C-BHC residues in rice grain

    International Nuclear Information System (INIS)

    Lee, S.R.; Kim, Y.H.

    1981-01-01

    γ-(U- 14 C)-BHC was applied to rice plants grown in a pot and its fate in the growth, polishing and oil-extraction processes of the grain was investigated. The 14 C-activity was absorbed and translocated widely in the plant and the recovery of applied 14 C-activity in the straw and grain was about 2.8%, of which 9.4% was found in the brown rice. The % partitioning of 14 C-residues in bran and polished rice was 12:88 and that in oil and oilcake was 37:63. Characterization of 14 C-residues the presence of γ-BHC, pentachlorocyclohexene, trichlorobenzene and hydrophilic metabolites, whose proportions were different in the straw and grain. (Author)

  12. Rectal absorption of homatropine [14C] methylbromide in the rat

    International Nuclear Information System (INIS)

    Cramer, M.B.; Cates, L.A.; Clarke, D.E.

    1978-01-01

    Homatropine [ 14 C]methylbromide (HMB- 14 C) was administered to rats by intramuscular injection, oral gavage and rectal suppository. Plasma concentrations of 14 C were measured over the subsequent 12 h. Peak plasma concentrations were higher and achieved more rapidly after rectal administration than by other routes whether HMB- 14 C was administered in a water-soluble suppository base or in aqueous solution. Twelve h after the suppositories were inserted and retained 28% of the 14 C had been excreted in the urine while 56% remained in the large intestine. Unlabelled HMB, given in rectal suppositories to anaesthetized rats, caused prompt blockade of the effects of vagal stimulation on pulse rate and of intravenous acetylcholine on blood pressure. These results confirm the rapid rectal absorption of the drug. (author)

  13. Radiocarbon 14C differentiation of sparkling and carbonated wines

    International Nuclear Information System (INIS)

    Martin, G.E.; Krueger, H.W.; Burggraff, J.M.

    1985-01-01

    Specific 14 C-activities, percent of modern 14 C-activity, and calculated percent of fermentation CO 2 are presented for CO 2 contained in commercial sparkling wines, labeled as champagne or produced by the bulk (charmat) process. These data are given for the production years 1976-1982. The survey encompassed effervescent wines produced in Spain, Italy, West Germany, California, and New York. Addition of synthetic CO 2 to approximately 40 samples represented as sparkling wines was indicated by low 14 C-activities of CO 2 in these wines. Data for 14 C-activity were also presented for the ethanol distilled from sparkling wines for the years 1977-1980. In all cases, the 14 C-activity of ethanol was appropriate to the year of vintage

  14. Synthesis of phenobarbital {sup 14}C - 5 (1964); Synthese du phenobarbital {sup 14}C - 5 (1964)

    Energy Technology Data Exchange (ETDEWEB)

    Benakis, A [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1964-07-01

    Phenobarbital (Luminal), well known as a hypnotic agent, plays also an important role in the medical treatment of epilepsy. With the object of studying the metabolism of this medicament in the living system, the synthesis of phenobarbital marked in position 2 of the pyrimidinic ring has been effected. It has been necessary, in order to carry out to research into the metabolism of this product, to have a phenobarbital marked in position 5 of the pyrimidinic ring. This synthesis, making it possible to introduce C-14 into position 5 of the pyrimidinic ring, consists of seven stages starting from C-14 carboxyl benzoic acid having a specific activity of 25 mc/mM. The melting point of the final product is 172 - 173 deg. C and its specific activity is 11.15 mc/mM. The overall radioactive yield of the pure product, with respect to the original benzoic acid (10 mM) is of the order of 3 per cent. The purity of the product has been controlled by paper chromatography; it is of the order of 99 per cent. (author) [French] Le phenobarbital (Luminal) bien connu comme agent hypnotique, joue egalement un role important dans la medication anti-epileptique. Pour l'etude du metabolisme de ce medicament dans l'organisme vivant, nous avons synthetise le phenobarbital marque en position 2 du cycle pyrimidinique. Afin de poursuivre la recherche du metabolisme de ce produit, il a ete necessaire de disposer du phenobarbital marque en position 5 du cycle. pyrimidinique. Cette synthese, permettant l'introduction du {sup 14}C en position 5 du cycle pyrimidinique, comporte sept etapes, au depart de l'acide benzoique carboxyle {sup 14}C, d'une activite specifique de 25 mc/mM. Point de fusion du produit final: 172 - 173 deg. C Activite specifique: 11,15 mC/mM. Rendement total radioactif du produit pur, par rapport a l'acide benzoique de depart sur 10 mM, de l'ordre de 3 pour cent. La purete du produit a ete controlee par chromatographie sur papier; elle est de l'ordre de 99 pour cent. (auteur)

  15. Myo-inositol-14C, phytic acid-14C and ferric phytate-14C metabolism through microbian action in an andosol soil

    International Nuclear Information System (INIS)

    Gonzalez I, J.

    1977-01-01

    The myo-inositol- 14 C, phytic acid- 14 C and ferric phytate- 14 C compounds were incubated in an andosol soil at 70% of the field capacity and at 36.5 deg C during twelve days. These compounds suffered a microbian oxidation at 14 CO 2 of 61.0, 1.9 and 0% respectively. The fixation of the phytic acid- 14 C was observed through the fast decrease in the metabolism, due to the formation of complexes with the Fe and Al (phytates). The myo-inositol- 14 C metabolism was reduced by a factor of nine at the second incubation day. The following mechanisms were observed in the myo-inositol metabolism: (i) adsorption of the inositol by the soil minerals, (ii) adsorption by humic acids, (iii) myo-inositol phosphorylation and (iv) epimerization of myo-inositol to chiro-inositol. It was found that the (i) and (ii) formation depends on the soil microbian activity. The (i), (ii) and (iii) interactions were considered as possible mechanisms for the inhibition of the myo-inositol microbian oxidation. The inhibition of the myo-inositol oxidation through adsorption or phosphorylation is considered as a chemical blockade for the hydroaxial group, avoiding this way a microbian oxidation stereospecific of this hydroxil group. (author)

  16. Intracavity optogalvanic spectroscopy. An analytical technique for 14C analysis with subattomole sensitivity.

    Science.gov (United States)

    Murnick, Daniel E; Dogru, Ozgur; Ilkmen, Erhan

    2008-07-01

    We show a new ultrasensitive laser-based analytical technique, intracavity optogalvanic spectroscopy, allowing extremely high sensitivity for detection of (14)C-labeled carbon dioxide. Capable of replacing large accelerator mass spectrometers, the technique quantifies attomoles of (14)C in submicrogram samples. Based on the specificity of narrow laser resonances coupled with the sensitivity provided by standing waves in an optical cavity and detection via impedance variations, limits of detection near 10(-15) (14)C/(12)C ratios are obtained. Using a 15-W (14)CO2 laser, a linear calibration with samples from 10(-15) to >1.5 x 10(-12) in (14)C/(12)C ratios, as determined by accelerator mass spectrometry, is demonstrated. Possible applications include microdosing studies in drug development, individualized subtherapeutic tests of drug metabolism, carbon dating and real time monitoring of atmospheric radiocarbon. The method can also be applied to detection of other trace entities.

  17. Absorption and translocation of 59Fe and 14C-rhodotorulate in iron-stressed tomato

    International Nuclear Information System (INIS)

    Miller, G.W.; Shigematsu, A.; Motoji, N.; Shibabe, S.

    1990-01-01

    Tomato plants, cultivars FER and Earlygirl (both iron efficient and able to use rhodotorulate- 59 Fe), were grown under low Fe conditions for 9 days. Rhodotorulate- 14 C, isolated from Rhodotorula pilimanae cultured with 14 C-sucrose, and rhodotorulate- 59 Fe were added to the Fe-stressed plants for 6-, 24- or 48-h periods. It was evident from autoradiograms and tissue sampling that 59 Fe and 14 C were abundant in roots, stems and leaves. The 14 C autoradiograms showed especially high density in the small, younger leaves, as was found also with 59 Fe. Unlike synthetic chelates, rhodotorulate (or metabolised derivatives) was readily absorbed by the roots and translocated to the leaves. (author)

  18. A convenient photosynthesis of uniformly [14C]-labelled D-glucose, D-fructose and sucrose, and chemical synthesis of methyl-α-D-glucopyranoside ([U-14C]-glucose)

    International Nuclear Information System (INIS)

    Srinivas, G.; Unny, V.K.P.; Mukkanti, K.; Choudary, B.M.

    2013-01-01

    This paper describes a convenient procedure for the radiochemical preparation of D-[U- 14 C]-glucose, D-[U- 14 C]-fructose and [U- 14 C]-sucrose with high specific activity by photosynthesis using ‘canna indica’ leaf, [ 14 C]-carbon dioxide and water in presence of light in a closed system. The [ 14 C]-sugars formed were extracted, separated and then purified by paper chromatography. Further, the pure D-[U- 14 C]-glucose obtained was converted to methyl-α-D-glucopyranoside ([U- 14 C]-glucose) by glycosidation with methanol using (i) HCl, the conventional Fischer method (ii) heterogeneous organic cation exchange resin (Amberlite IR-120 (H + )) and (iii) heterogeneous inorganic cation exchanged montmorillonites called metal M +n -monts. The results indicated that the latter in the form of Fe +3 -montmorillonite gave a better yield ( 65%) as compared to others (40–56%). The radiochemical purity of the no-carrier added product was more than 98%. The product retained its specific activity as that of the starting material which is in the range of 250–300 mCi/mmole (9.25–11.1 GBq/mmole), suitable for use as a radiotracer in biochemical investigations. - Graphical abstract: A convenient photosynthesis of uniformly [ 14 C]-labelled D-glucose, D-fructose and sucrose, and chemical synthesis of methyl-α-D-glucopyranoside ([U- 14 C]-glucose)/[ 14 C]–AMG, in short. The photosynthesis of D-[U- 14 C]-glucose, and two other [ 14 C]-sugars (fructose and sucrose) with high specific activity using ‘Canna indica’ leaf, 14 CO 2 and water in presence of light is presented in this paper. Further, the D-[U- 14 C]-glucose obtained was converted to methyl-α-D-glucopyranoside ([U- 14 C]-glucose)/[ 14 C]–AMG having 98% radiochemical purity and specific activity in the range of 250–300 mCi/mmole, using montmorillonites (M +n -monts). Highlights: ► Synthesis of methyl α D-glucopyranoside ([U- 14 C] glucose) has not been reported using M +n -monts. ► M +n -monts are

  19. Adsorption characteristics of 14C-labeled alanine, aspartic acid and adenosine triphosphate by metal-chelating resins

    International Nuclear Information System (INIS)

    Ishiyama, Toshio; Matsunami, Tadao; Shibata, Setsuko; Honda, Yoshihide.

    1987-01-01

    (1) Adsorption properties of 14 C-alanine, 14 C-ATP (adenosine triphosphate) and 14 C-aspartic acid on the metal-chelating resins were determined and found that the Cu(II)-Chelex 100 and Fe(III)-Unicellex UR10, Fe(III)-Chelex 100 chelating resins were highly effective for the adsorption of 14 C-alanine and 14 C-ATP, respectively. (2) Desorption rate of 14 C-ATP from the Fe(III)-Unicellex UR10 and Fe(III)-Chelex 100 resins was somewhat higher than the case of 14 C-alanine, probably because the coordination bonds of Cu-alanine might be stronger than those of Fe-ATP. Thus, 14 C-labeled organic compounds such as 14 C-alanine and 14 C-ATP of a low activity concentration (3.7 mBq/ml) (1 x 10 -7 μCi/ml) in aqueous solution may be measured with liquid scintillation counter after pre-concentration by use of the Fe(III)- and Cu(II)-chelating resin columns. (author)

  20. Design of High Precise Focusing System in Laser Direct Writer

    International Nuclear Information System (INIS)

    Liang, Y Y; Tian, F; Luo, J B; Yang, G G

    2006-01-01

    In order to improve the accuracy and efficiency of fabricating lines with laser pattern generator, a novel focusing system was designed. Focusing system is based on optical off-axis detection principle. The detector is a two-quadrant photocell and the defocus signal is constructed by division. Focusing system has the character of second-order system with overdamp. The new embedded PID controller improves the performance of focusing system and upgrades the closed-loop precision to 0.2 μm. Furthermore focusing system has the fabrication capabilities for alterable-width lines under various defocus amount

  1. High precision survey and alignment techniques in accelerator construction

    CERN Document Server

    Gervaise, J

    1974-01-01

    Basic concepts of precision surveying are briefly reviewed, and an historical account is given of instruments and techniques used during the construction of the Proton Synchrotron (1954-59), the Intersecting Storage Rings (1966-71), and the Super Proton Synchrotron (1971). A nylon wire device, distinvar, invar wire and tape, and recent automation of the gyrotheodolite and distinvar as well as auxiliary equipment (polyurethane jacks, Centipede) are discussed in detail. The paper ends summarizing the present accuracy in accelerator metrology, giving an outlook of possible improvement, and some aspects of staffing for the CERN Survey Group. (0 refs).

  2. A high precision method for normalization of cross sections

    International Nuclear Information System (INIS)

    Aguilera R, E.F.; Vega C, J.J.; Martinez Q, E.; Kolata, J.J.

    1988-08-01

    It was developed a system of 4 monitors and a program to eliminate, in the process of normalization of cross sections, the dependence of the alignment of the equipment and those condition of having centered of the beam. It was carried out a series of experiments with the systems 27 Al + 70, 72, 74, 76 Ge, 35 Cl + 58 Ni, 37 Cl + 58, 60, 62, 64 Ni and ( 81 Br, 109 Rh) + 60 Ni. For these experiments the typical precision of 1% was obtained in the normalization. It is demonstrated theoretical and experimentally the advantage of this method on those that use 1 or 2 monitors. (Author)

  3. Effects of Pseudomonas species on the release of bound 14C residues from soil treated with [14C]atrazine

    International Nuclear Information System (INIS)

    Khan, S.U.; Behki, R.M.

    1990-01-01

    The release of bound (nonextractable) 14 C residues from soil previously treated with [ 14 C]atrazine was investigated by incubation of the solvent-extracted soil with two species of Pseudomonas capable of metabolizing atrazine. The two species, 192 and 194, released bound 14 C residues from the soil. Addition of glucose, known to increase microbiological activities, to the incubated soil appeared to enhance the release of soil-bound 14 C residues, in particular in the presence of Pseudomonas species 192. The 14 C bound residues in soil, mainly present as the parent compound and its hydroxy and monodealkylated analogues, were released into the incubation mixture and were subsequently metabolized by the two species involving dechlorination and dealkylation

  4. Dating human DNA with the 14C bomb peak

    Energy Technology Data Exchange (ETDEWEB)

    Kutschera, Walter; Liebl, Jakob; Steier, Peter [VERA Laboratory, University of Vienna, Vienna (Austria)

    2013-07-01

    In 1963 the limited nuclear test ban treaty stopped nuclear weapons testing in the atmosphere. By then the addition from bomb-produced {sup 14}C had doubled the {sup 14}C content of the atmosphere. Through the CO{sub 2} cycle this excess exchanged with the hydrosphere and biosphere leading to a rapidly decreasing {sup 14}C level in the atmosphere. Today we are almost back to the pre-nuclear level. As a consequence all people on Earth who lived during the second half of the 20th century were exposed to this rapidly changing {sup 14}C signal. A few years ago, a group at the Department of Cell and Molecular Biology of the Karolinska Institute in Stockholm started to use the {sup 14}C bomb peak signal in DNA to determine retrospectively the age of cells from various parts of the human body (brain, heart, fat). In a collaboration with this group, we have studied the age of olfactory bulb neurons in the human brain. For this investigation, {sup 14}C AMS measurements were developed at VERA for very small carbon samples in the range from 2 to 4 micrograms. In the presentation the general concept of {sup 14}C bomb peak dating of human DNA and several applications are discussed.

  5. Secretin enhances [14C]erythritol clearance in unanesthetized dogs

    International Nuclear Information System (INIS)

    Lewis, M.H.; Baker, A.L.; Dhorajiwala, J.; Moossa, A.R.

    1982-01-01

    To determine the effect of secretin infusion on clearance of inert markers into bile, unanesthetized dogs fitted with Thomas cannulas received continuous infusions of [ 14 C]erythritol and [ 3 H]inulin throughout study. Taurocholic acid administered sequentially at 9.0, 20.0, and 40.0 mumol/min enhanced [ 14 C]erythritol clearance, and GIH secretin (3 units/min) administered along with TCA (40.0 mumol/min) increased [ 14 C]erythritol clearance from 4.9 +/- 1.2 ml/10 min to 6.8 +/- 1.3 ml/10 min (P less than 0.001), but simultaneously measured [ 3 H]inulin clearance was unaltered. Secretin alone also increased [ 14 C]erythritol clearance but did not alter [ 3 H]inulin clearance. The increase in [ 14 C]erythritol clearance per unit increase in bile flow was less during secretin infusion than TCA. Thus, secretin increases [ 14 C]erythritol transport through restricted channels, probably distal to the canaliculi. [ 14 C]Erythritol may not be an accurate marker for canalicular bile flow in dogs during secretin infusion

  6. TMEM14C is required for erythroid mitochondrial heme metabolism.

    Science.gov (United States)

    Yien, Yvette Y; Robledo, Raymond F; Schultz, Iman J; Takahashi-Makise, Naoko; Gwynn, Babette; Bauer, Daniel E; Dass, Abhishek; Yi, Gloria; Li, Liangtao; Hildick-Smith, Gordon J; Cooney, Jeffrey D; Pierce, Eric L; Mohler, Kyla; Dailey, Tamara A; Miyata, Non; Kingsley, Paul D; Garone, Caterina; Hattangadi, Shilpa M; Huang, Hui; Chen, Wen; Keenan, Ellen M; Shah, Dhvanit I; Schlaeger, Thorsten M; DiMauro, Salvatore; Orkin, Stuart H; Cantor, Alan B; Palis, James; Koehler, Carla M; Lodish, Harvey F; Kaplan, Jerry; Ward, Diane M; Dailey, Harry A; Phillips, John D; Peters, Luanne L; Paw, Barry H

    2014-10-01

    The transport and intracellular trafficking of heme biosynthesis intermediates are crucial for hemoglobin production, which is a critical process in developing red cells. Here, we profiled gene expression in terminally differentiating murine fetal liver-derived erythroid cells to identify regulators of heme metabolism. We determined that TMEM14C, an inner mitochondrial membrane protein that is enriched in vertebrate hematopoietic tissues, is essential for erythropoiesis and heme synthesis in vivo and in cultured erythroid cells. In mice, TMEM14C deficiency resulted in porphyrin accumulation in the fetal liver, erythroid maturation arrest, and embryonic lethality due to profound anemia. Protoporphyrin IX synthesis in TMEM14C-deficient erythroid cells was blocked, leading to an accumulation of porphyrin precursors. The heme synthesis defect in TMEM14C-deficient cells was ameliorated with a protoporphyrin IX analog, indicating that TMEM14C primarily functions in the terminal steps of the heme synthesis pathway. Together, our data demonstrate that TMEM14C facilitates the import of protoporphyrinogen IX into the mitochondrial matrix for heme synthesis and subsequent hemoglobin production. Furthermore, the identification of TMEM14C as a protoporphyrinogen IX importer provides a genetic tool for further exploring erythropoiesis and congenital anemias.

  7. High precision determination of 16O in high Tc superconductors by DIGME

    International Nuclear Information System (INIS)

    Vickridge, I.; Tallon, J.; Presland, M.

    1994-01-01

    A method is described for measuring the 16 O content of high T c superconductors with better than 1% precision by exploiting the detection of gamma rays emitted when they are irradiated by an MeV deuterium beam. The method is presently less accurate than the widely used titration and thermogravimetric methods, however it is rapid, and may be applied to materials such as Tl-containing high T c superconductors which pose serious problems for the usual analytical methods. (orig.)

  8. Appraisal of the 14C-glycocholate acid test with special reference to the measurement of faecal 14C excretion

    International Nuclear Information System (INIS)

    Scarpello, J.H.B.; Sladen, G.E.

    1977-01-01

    The 14 C-glycocholate test, including the measurement of marker corrected faecal 14 C, has been assessed in the following groups of subjects: normal controls (18), patients with diarrhoea not attributable to altered bile acid metabolism (21), patients with diverticula of the small intestine (12), patients with previous resection of ileum and often proximal colon (34), and established ileostomists (10). Patients with diverticular disease had increased breath 14 CO 2 excretion, but normal faecal excretion of 14 C, and this test was more frequently abnormal than the Schilling test. Ileostomists excreted increased amounts of faecal 14 C, even when the ileum was intact and apparently normal. The pattern after resection was complex. Breath 14 C output was normal if the ileal resection was less than 25 cm in length, although some of these patients had increased faecal 14 C excretion if, in addition, at least 15 cm of proximal colon had been resected or by-passed. Longer ileal resections were associated with increased breath and/or faecal 14 C excretion, depending in part on the length of colon resected or by-passed and the 24 hour faecal volume. Fewer than half these patients had both increased breath and faecal excretion of isotope and faecal 14 C alone was occasionally normal with an ileal resection of 50 cm or more. The 14 C-glycocholate test was more frequently abnormal than the Schilling test in this group. The use of faecal marker correction had only a minor impact on the results. These data suggest that, in patients with ileal resection, faecal 14 C, like faecal weight, is determined by the extent of colonic resection as well as by the amount of ileum resected. (author)

  9. Application of AMS 14C measurements to criminal investigations

    International Nuclear Information System (INIS)

    Nakamura, T.; Ohta, T.; Nishida, M.; Ikeda, A.; Oda, H.; Kojima, S.; Niu, E.

    2005-01-01

    14 C variations of atmospheric CO 2 as well as carbonaceous materials of human body, such as collagen fractions from teeth and bone, tissue, hair, nail, etc., of modern humans dead or alive, are influenced by 14 C produced artificially by nuclear bomb tests in the atmosphere from late 1950s to early 1960s. By careful investigation of 14 C concentration of tree rings and human tissue samples formed in this time ranges, we can establish a relation between their 14 C concentrations and calendar year. By applying this relation to a sample whose 14 C concentration can be measured, we can estimate the formation age of the sample. In addition, sources of the drugs that were used in some criminal cases can be possibly identified by the analysis of their carbon isotope ratios ( 13 C/ 12 C and 14 C/ 12 C). This method of age determination was applied to a forensic study; i.e., to two similar cases of murder. One of the two cases is for a dead body of a modern human who was killed in 1978 and buried under the floor of the house owned by the murderer. The body was excavated in 2004 according to the confession by the murderer. 14 C abundances of several pieces of hair and one tooth (the third molar) from the body were measured with accelerator mass spectrometry (AMS), and compared with the annual change on concentrations of bomb-produced 14 C. The time of death of the body was estimated to be at around 1977, and her age was from 30 to 37 years old at that time. These estimations were consistent with the real values that were revealed after the case was solved by the confession of the real murderer who gave himself up to the police. For the other case, 14 C analysis was also consistent with the fact revealed by police investigations as well as by the confession of the real murderer.

  10. Synthesis of 14C and 32P double labelled triethylphosphine

    International Nuclear Information System (INIS)

    Kanska, M.; Drabarek, S.

    1979-01-01

    The synthesis of 14 C and 32 P double labelled triethylphosphine has been carried out using red phosphorus [ 32 P] and barium carbonate [ 14 C] as starting materials. The product of the reaction has been separated by gas chromatography. The 32 P radioactivity assay of the obtained product was performed by the liquid scintillation technique. The 14 C radioactivity was determined by the liquid scintillation technique and internal gas counting method. The radioactivity measurements have served to determine the total yield of double labelled triethylphosphine. (author)

  11. Method of preparing pyrimidine derivatives universally labelled with 14C

    International Nuclear Information System (INIS)

    Pritasil, L.; Filip, J.

    1976-01-01

    Sodium salts of beta-keto acid ethyl esters having mole activity higher than 40 mCi/milliatom 14 C are condensed with 14 C-thiourea having mole activity higher than 40 mCi/milliatom 14 C. Condensation proceeds in an anhydrous ethanol medium at a 1:1 molar ratio, with a 40 to 50% yield. Under the above reaction conditions, the radiochemical yield is higher than 20% while in biosynthesis it is 1% and in the chemical synthesis it is 10%. (J.P.)

  12. Absorption, distribution, and metabolism of [14C]chlorpyrifos applied dermally to goats

    International Nuclear Information System (INIS)

    Cheng, T.; Bodden, R.M.; Puhl, R.J.; Bauriedel, W.R.

    1989-01-01

    Radiolabeled chlorpyrifos [O,O-diethyl O-(3,5,6-trichloro-2-pyridyl) phosphorothioate] was applied dermally to two male weanling goats, at a dose of 22 mg/kg of body weight. A blood sample was drawn before dosing and every 4 h thereafter. The animals were sacrificed approximately 18 h after dosing, when blood radioactivity levels at 16 h had declined from maximum values (12 h) in both animals. Radioanalysis of blood and selected tissues (liver, kidney, heart, fat, muscle) indicated that radioactivity levels were, in general, very low, ranging from 0.04 ppm (chlorpyrifos equivalents) in muscle to 0.90 ppm in omental fat. Tissue extracts contained 80-96% of the 14 C residue, most of which was organosoluble. High-performance liquid chromatography analysis of tissue extracts showed that the predominant 14 C residue in liver and kidney was [ 14 C]-3,5,6-trichloro-2-pyridinol (chlorpyridinol) whereas [ 14 C]chlorpyrifos was predominant in fat and heart extracts. In muscle, in addition to approximately equal amounts of [ 14 C]chlorpyridinol and [ 14 C]chlorpyrifos, 18.6% of the radioactivity was unidentified; alkaline hydrolysis quantitatively converted the latter radioactivity to pyridinol

  13. Historical 14C measurements from the Atlantic, Pacific and Indian Oceans. Final report

    International Nuclear Information System (INIS)

    Fairhall, A.W.; Young, A.W.

    Atmospheric nuclear testing produced a dramatic increase in the level of 14 C in atmospheric CO 2 . Since the tropospheric residence time of 14 C is on the order of a few years before being transferred to the sea, it appeared that a study of the distribution of the excess 14 C in the sea and its change with time would give valuable insight into such problems as the rate of CO 2 exchange between the atmosphere and the sea and its dependence on wind speed over the sea surface; the rate of transfer by oceanic mixing processes of contaminants, including fallout radionuclides introduced initially into the mixed surface layer of the sea, into the deep sea; the rate of bottom water formation at high latitudes and subsequent advective transport from these source regions into the deep sea. Therefore a 14 C sampling program was initiated. A method was developed for stripping CO 2 from sea water on board ship. The assay for 14 C was performed by a radiocarbon gas proportional counter. Information on temperature and salinity at the various sampling depths as well as total CO 2 and absolute concentration of 14 C is tabulated

  14. Direct dating of archaeological pottery by compound-specific 14C analysis of preserved lipids.

    Science.gov (United States)

    Stott, Andrew W; Berstan, Robert; Evershed, Richard P; Bronk-Ramsey, Christopher; Hedges, Robert E M; Humm, Martin J

    2003-10-01

    A methodology is described demonstrating the utility of the compound-specific 14C technique as a direct means of dating archaeological pottery. The method uses automated preparative capillary gas chromatography employing wide-bore capillary columns to isolate individual compounds from lipid extracts of archaeological potsherds in high purity (>95%) and amounts (>200 microg) sufficient for radiocarbon dating using accelerator mass spectrometry (AMS). A protocol was developed and tested on n-alkanes and n-carboxylic acids possessing a broad range of 14C ages. Analytical blanks and controls allowed background 14C measurements to be assessed and potential sources of errors to be detected, i.e., contamination with modern or dead 14C, isotopic fraction effects, etc. A "Russian doll" method was developed to transfer isolated target compounds onto tin powder/capsules prior to combustion and AMS analyses. The major advantage of the compound-specific technique is that 14C dates obtained for individual compounds can be directly linked to the commodities processed in the vessels during their use, e.g., animal fats. The compound-specific 14C dating protocol was validated on a suite of ancient pottery whose predicted ages spanned a 5000-year date range. Initial results indicate that meaningful correlations can be obtained between the predicted date of pottery and that of the preserved lipids. These findings constitute an important step forward to the direct dating of archaeological pottery.

  15. Mineralization of 14C-Pirimiphos-Methyl in Soil Under Aerobic and Anaerobic Conditions

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Farghly, M.; El-Maghrby, S.

    2006-01-01

    The mineralization of 14 C-ring labelled pirimiphos-methyl in clay loam soil was determined in a three months laboratory incubation period under anaerobic and aerobic conditions. Evolution of 14 CO2 increased with time and reached 9.2% and 12 %, of the initial 14 C-concentration , within 90 days in case of anaerobic and aerobic conditions, respectively, at that time, soil contained about 61.5% of the applied dose as extractable residues under anaerobic conditions and 59% under aerobic conditions. the unextractable pesticide residues gradually increased with time and the highest binding capacity of about 11%-13% was observed after 90 days of incubation. the total 14 C-activity recovered from soil was generally between 82% and 92% of the applied radiocarbon. the nature of methanolic 14 C-residues was determined by chromatographic analysis and the results revealed the presence of pirimiphos- methyl as a main product together with its phenol. the principle of radio-respirometry has been used for evaluating the effect of different application rates of pirimiphos-methyl on soil microbial activity using U- 14 C-glucose as a substrate. At two concentrations used, pirimiphos-methyl showed an inhibition in the rate of 14 Co2 evolution over 14 days of incubation as a result of oxidation of 14 C-glucose by microorganisms especially in case of high concentration

  16. Preparation of D-[U-14C]galactose and α-D-[U-14C]galactose-1-phosphate

    International Nuclear Information System (INIS)

    Kolina, J.; Hromadkova, B.

    1989-01-01

    Optically pure D-[U- 14 C]galactose was prepared on a preparatory scale using the galactokinase enzyme. The suggested procedure allows to also prepare a α-D-[U- 14 C]galactose-1-phosphate and L-[U- 14 ]galactose giving good yield. The experiments proved that the raw fraction isolated from yeast of the Kluyveromyces fragilis strain or the Kluyveromyces lactis strain shows sufficient activity. Phosphorylation of D-[U- 14 C]galactose practically terminates after 30 mins of incubation. DL-[U- 14 C]galactose isolated using preparatory paper chromatography from the acid hydrolyzate of [U- 14 C] polysaccharide is a satisfactory radioactive precursor. The developed preparation procedure theoretically contributed towards the further elucidation of the problem of the proportional representation of galactose stereo-isomers in extracellular polysaccharide isolated from red algae. In this respect data in the literature differ and some sources state a significantly higher propertion of L-galactose. The experiments showed that [U- 14 C] polysaccharide isolated from the red algae Porphyridium cruentum prevalently contains D-[U- 14 C]galactose, which confirms the process of enzyme reaction. (author). 1 tab., 4 refs

  17. Local variance of atmospheric 14C concentrations around Fukushima Dai-ichi Nuclear Power Plant from 2010 to 2012

    DEFF Research Database (Denmark)

    Chen, Biying; Xu, Sheng; Cook, Gordon T.

    2017-01-01

    Radiocarbon (14C) has been measured in single tree ring samples collected from the southwest of the Fukushima Dai-ichi Nuclear Power Plant. Our data indicate south-westwards dispersion of radiocarbon and the highest 14C activity observed so far in the local environment during the 2011 accident....... The abnormally high 14C activity in the late wood of 2011 ring may imply an unknown source of radiocarbon nearby after the accident. The influence of 14C shrank from 30 km during normal reactor operation to 14 km for the accident in the northwest of FDNPP, but remains unclear in the southwest....

  18. Studies on residues of 14C malathion in soils

    International Nuclear Information System (INIS)

    Ghezal, F.; Bennaceur, M.

    1991-04-01

    The extractability, the mobility and formation of bound 14C labelled residues in two soils under normal conditions were investigated with malathion. Comparison is made between irradiated and autoclaved soils. The highest concentration of the product is found in the first section (0-4cm) after experiment. Three compounds were found in the soils. 14C malathion is decomposed to 14C02. The degradation is more important in organic matter rich soil. In rich soil, 50% of 14C product is degradated after 17 days. This percentage is only 10%, for poor soil. The 14CO 2 produced in non-sterile soil is 33,05%. This percentage is respectively 10,92% and 3,57% only for irradiated and autoclaved soils

  19. Determination of phagocytosis in periodontitis postjuvenilis using 14C

    International Nuclear Information System (INIS)

    Zietek, M.

    1990-01-01

    In 20 patients with periodontitis and 10 healthy controls phagocytosis was determined using 14 C-labelled Staphylococcus aureus. The decrease of phagocytosis found in the diseased patients was significant

  20. Forensic applications of {sup 14}C bomb-pulse dating

    Energy Technology Data Exchange (ETDEWEB)

    Zoppi, U. E-mail: ugo@ansto.gov.au; Skopec, Z.; Skopec, J.; Jones, G.; Fink, D.; Hua, Q.; Jacobsen, G.; Tuniz, C.; Williams, A

    2004-08-01

    After a brief review of the basics of {sup 14}C bomb-pulse dating, this paper presents two unique forensic applications. Particular attention is dedicated to the use of the {sup 14}C bomb-pulse to establish the time of harvest of illicit drugs such as heroin and opium. Preliminary measurements of {sup 14}C concentrations in milligram samples taken from seized drugs are presented. {sup 14}C bomb-pulse dating can determine whether drug distribution originates from stockpiles or recent manufacture, and support the action of law enforcement authorities against criminal organisations involved in drug trafficking. In addition, we describe the dating of wine vintages for a number of authenticated single label vintage red wines from the Barossa Valley - South Australia. Our results show that radiocarbon dating can be used to accurately determine wine vintages and therefore reveal the addition of unrelated materials of natural and synthetic origin.

  1. Forensic applications of 14C bomb-pulse dating

    International Nuclear Information System (INIS)

    Zoppi, U.; Skopec, Z.; Skopec, J.; Jones, G.; Fink, D.; Hua, Q.; Jacobsen, G.; Tuniz, C.; Williams, A.

    2004-01-01

    After a brief review of the basics of 14 C bomb-pulse dating, this paper presents two unique forensic applications. Particular attention is dedicated to the use of the 14 C bomb-pulse to establish the time of harvest of illicit drugs such as heroin and opium. Preliminary measurements of 14 C concentrations in milligram samples taken from seized drugs are presented. 14 C bomb-pulse dating can determine whether drug distribution originates from stockpiles or recent manufacture, and support the action of law enforcement authorities against criminal organisations involved in drug trafficking. In addition, we describe the dating of wine vintages for a number of authenticated single label vintage red wines from the Barossa Valley - South Australia. Our results show that radiocarbon dating can be used to accurately determine wine vintages and therefore reveal the addition of unrelated materials of natural and synthetic origin

  2. Synthesis of [14C]-labelled AY-30,068

    International Nuclear Information System (INIS)

    Hicks, D.R.; Hangeland, J.J.; Mobilio, D.; DeLange, B.

    1988-01-01

    [ 14 C]AY-30,068 (cis-1,8-diethyl-2,3,4,9-tetrahydro-4-(2-propenyl)-1H-carbazole-1-acetic acid), a potent analgesic agent, was prepared by incorporating [ 14 C]methyl iodide via a Wittig reaction. The intermediate aldehyde was synthesized in six steps from cis-1-ethyl-2-oxo-4-(2-propenyl)cyclohexaneacetic acid methyl ester. Three batches of the [ 14 C]labelled AY-30,068 were produced, giving a combined overall yield of 9% from [ 14 C]methyl iodide sp. act. 51.2, 17.7 and 4.4 μCi/mg; 97.5, 98.3, and 98.6% radiochemical purity, respectively. (author)

  3. Incorporation of 14C-succinate in Synechococcus

    International Nuclear Information System (INIS)

    Doehler, G.

    1983-01-01

    The cyanobacterium Synechococcus (= Anacystis nidulans) was grown under normal air conditions (0.03 vol.% CO 2 ) and in low white light (0.5 x 10 3 μW/cm 2 ) at 37 0 C. Kinetics of 14 C incorporation into several soluble products and pigments were studied after adding 14 C-succinate during photosynthesis and in the dark using the autoradiographic method. Radioactivity was found mainly in glutamate and aspartate during the photosynthetic period independent on 3-(3',4'-dichlorphenyl)-1,1-dimethylurea preincubation. In the dark period 14 C label could also be detected in malate. Short-term kinetics experiments showed a decrease in 14 C label of glutamate and a parallel increase of aspartate. Results were discussed in respect to the interrupted tricarboxylic acid cycle. (author)

  4. Forensic applications of 14C bomb-pulse dating

    Science.gov (United States)

    Zoppi, U.; Skopec, Z.; Skopec, J.; Jones, G.; Fink, D.; Hua, Q.; Jacobsen, G.; Tuniz, C.; Williams, A.

    2004-08-01

    After a brief review of the basics of 14C bomb-pulse dating, this paper presents two unique forensic applications. Particular attention is dedicated to the use of the 14C bomb-pulse to establish the time of harvest of illicit drugs such as heroin and opium. Preliminary measurements of 14C concentrations in milligram samples taken from seized drugs are presented. 14C bomb-pulse dating can determine whether drug distribution originates from stockpiles or recent manufacture, and support the action of law enforcement authorities against criminal organisations involved in drug trafficking. In addition, we describe the dating of wine vintages for a number of authenticated single label vintage red wines from the Barossa Valley - South Australia. Our results show that radiocarbon dating can be used to accurately determine wine vintages and therefore reveal the addition of unrelated materials of natural and synthetic origin.

  5. High-precision x-ray spectroscopy of highly charged ions with microcalorimeters

    International Nuclear Information System (INIS)

    Kraft-Bermuth, S; Andrianov, V; Bleile, A; Echler, A; Egelhof, P; Grabitz, P; Ilieva, S; Kiselev, O; Meier, J; Kilbourne, C; McCammon, D

    2013-01-01

    The precise determination of the energy of the Lyman α1 and α2 lines in hydrogen-like heavy ions provides a sensitive test of quantum electrodynamics in very strong Coulomb fields. To improve the experimental precision, the new detector concept of microcalorimeters is now exploited for such measurements. Such detectors consist of compensated-doped silicon thermistors and Pb or Sn absorbers to obtain high quantum efficiency in the energy range of 40–70 keV, where the Doppler-shifted Lyman lines are located. For the first time, a microcalorimeter was applied in an experiment to precisely determine the transition energy of the Lyman lines of lead ions at the experimental storage ring at GSI. The energy of the Ly α1 line E(Ly-α1, 207 Pb 81+ ) = (77937 ± 12 stat ± 25 syst ) eV agrees within error bars with theoretical predictions. To improve the experimental precision, a new detector array with more pixels and better energy resolution was equipped and successfully applied in an experiment to determine the Lyman-α lines of gold ions 197 Au 78+ . (paper)

  6. Genetic consequences of the 14C-decay

    International Nuclear Information System (INIS)

    Gracheva, L.M.; Korolev, V.G.

    1978-03-01

    There are only few investigations on the biological and genetic consequences of 14 C decay especially due to the long half-life of 14 C. Naturally, the consequences of the decay of 14 C incorperated in DNA is of particular interest. Due to the thus occuring conversion into nitrogen, either opening of the ribose residue ring and base occurs or conversion into base analogue. The present work gives a survey on the investigational results on this topic which were obtained by various authors on phages, bacteria, algae and animal cells, as well as on molecular level. It was shown that the transmutation for the occurence of a lethal effect is many times more effective than β-radiation. Investigations of the mutagenic effects and other genetic effects of the 14 C decay were carried out on micro-organisms, however also on higher forms of life, plants, insects and mice. An analysis of the mutations showed that transitions as well as transversions occur. As example for genetic effects of 14 C decay, the two following are named. In the case of mice which were exposed to 14 CO 2 atmosphere, it was seen that the number of polyptoidal chromosome sets in the first spermotacytes increased considerably, an increase of the chromosome conversion rate was however not observed. When treating gryllus larvae with 14 C, it was interesting to note that the crossing of 14 C-contained females with normal males produced viable eggs, whereas normal females after crossing with 14 C contained males, laid no more eggs. (MG) 891 MG [de

  7. Synthesis and analysis of 14C-labelled butyltin compounds

    International Nuclear Information System (INIS)

    Kloetzer, D.

    1976-01-01

    This paper deals with methods for the synthesis of 14 C-labelled analoga of the important biocides tributyltin oxide, tributyltin benzoate, tributyltin salicylate and tributyltin fluoride as well as dibutyltin oxide. The radioactive starting substance butylbromide-1- 14 C is treated with sodium and monobutyltin chloride or tin tetrachloride to form a mixture of radioactive butyltin compounds from which the substance desired is separated. A system satisfactorily meeting the conditions for thin-layer radiochromatography is presented. (author)

  8. Radioactive decay of 223Ra by 14C emission

    International Nuclear Information System (INIS)

    Yashita, S.; Gregorich, K.; Ghiorso, A.

    1985-01-01

    Recently H.J. Rose and G.A. Jones at the University of Oxford reported the very difficult observation of an exotic radioactive decay mode in 233 Ra, its spontaneous disintegration by the emission of 14 C particles. The authors have confirmed their somewhat surprising discovery by an independent method. Within the present experimental accuracy the magnetic rigidity, energy and branching ratio support the assignment of 14 C emission from 223 Ra as proposed by the Oxford experiment

  9. 14C-Metampicillin stability in several physiological sera

    International Nuclear Information System (INIS)

    Jimeno de Osso, F.; Casas Medica, F.; Carriazo Tovar, D.

    1981-01-01

    Degradation of 14 C -metampicillin incorporated to several physiological sera for medical uses has been studied. Influence of environmental conditions as well as possible interaction with the solvent have been specially analyzed. Degradation level of the labelled multiplication has been determined and its degradation products have been separated by using chromatographic and radiochemical methods. Likewise, the 14 C -metam picill synthesis has been described. Finally, the results obtained have been discussed and evaluated. (Author) 9 refs

  10. Trial of accelerator cells machining with high precision and high efficiency at Okayama region

    International Nuclear Information System (INIS)

    Yoshikawa, Mitsuo; Yoden, Hiroyuki; Yokomizo, Seiichi; Sumida, Tsuneto; Kunishida, Jun; Oshita, Isao

    2005-01-01

    In the framework of the project 'Promotion of Science and Technology in Regional Areas' by the Ministry of Education, Culture, Sports, Science and Technology, we have prepared a special apparatus for machining accelerator cells with a high precision and a high efficiency for the future linear collider. A machining with as small an error as 2 micrometers has been realized. Necessary time to finish one accelerator cell is reduced from 128 minutes to 34 minutes due to the suppression of the heating of the object at the machining. If newly developed one chuck method was employed, the precision and efficiency would be further improved. By cutting at both sides of the spindle, the necessary time for machining would be reduced by half. (author)

  11. Precision manufacturing

    CERN Document Server

    Dornfeld, David

    2008-01-01

    Today there is a high demand for high-precision products. The manufacturing processes are now highly sophisticated and derive from a specialized genre called precision engineering. Precision Manufacturing provides an introduction to precision engineering and manufacturing with an emphasis on the design and performance of precision machines and machine tools, metrology, tooling elements, machine structures, sources of error, precision machining processes and precision process planning. As well as discussing the critical role precision machine design for manufacturing has had in technological developments over the last few hundred years. In addition, the influence of sustainable manufacturing requirements in precision processes is introduced. Drawing upon years of practical experience and using numerous examples and illustrative applications, David Dornfeld and Dae-Eun Lee cover precision manufacturing as it applies to: The importance of measurement and metrology in the context of Precision Manufacturing. Th...

  12. Futility of high-precision SO(10) calculations

    International Nuclear Information System (INIS)

    Dixit, V.V.; Sher, M.

    1989-01-01

    In grand unified models, there are a large number of scalar bosons with masses of the order of the unification scale. Since the masses could be an order of magnitude or so above or below the vector-boson masses, they will affect the beta functions and thus low-energy predictions; the lack of knowledge of the masses translates into an uncertainty in these predictions. Although the effect is very small for a single scalar field, SO(10) models have hundreds of such fields, leading to very large uncertainties. We analyze this effect in SO(10) models with intermediate scales, and show that all such models have an additional uncertainty which can be as large as 4 orders of magnitude in the proton lifetime and as large as a factor of 0.02 in sin 2 θ w . In models with 210-dimensional representations, the weak mixing angle is uncertain by as much as 0.06. As a result, we argue that precise calculations in SO(10) models with intermediate scales may not be possible

  13. High precision silicon piezo resistive SMART pressure sensor

    International Nuclear Information System (INIS)

    Brown, Rod

    2005-01-01

    Instruments for test and calibration require a pressure sensor that is precise and stable. Market forces also dictate a move away from single measurand test equipment and, certainly in the case of pressure, away from single range equipment. A pressure 'module' is required which excels in pressure measurement but is interchangble with sensors for other measurands. A communications interface for such a sensor has been specified. Instrument Digital Output Sensor (IDOS) that permits this interchanagability and allows the sensor to be inside or outside the measuring instrument. This paper covers the design and specification of a silicon diaphragm piezo resistive SMART sensor using this interface. A brief history of instrument sensors will be given to establish the background to this development. Design choices of the silicon doping, bridge energisation method, temperature sensing, signal conversion, data processing, compensation method, communications interface will be discussed. The physical format of the 'in-instrument' version will be shown and then extended to the packaging design for the external version. Test results will show the accuracy achieved exceeds the target of 0.01%FS over a range of temperatures

  14. High precision silicon piezo resistive SMART pressure sensor

    Science.gov (United States)

    Brown, Rod

    2005-01-01

    Instruments for test and calibration require a pressure sensor that is precise and stable. Market forces also dictate a move away from single measurand test equipment and, certainly in the case of pressure, away from single range equipment. A pressure `module' is required which excels in pressure measurement but is interchangble with sensors for other measurands. A communications interface for such a sensor has been specified. Instrument Digital Output Sensor (IDOS) that permits this interchanagability and allows the sensor to be inside or outside the measuring instrument. This paper covers the design and specification of a silicon diaphragm piezo resistive SMART sensor using this interface. A brief history of instrument sensors will be given to establish the background to this development. Design choices of the silicon doping, bridge energisation method, temperature sensing, signal conversion, data processing, compensation method, communications interface will be discussed. The physical format of the `in-instrument' version will be shown and then extended to the packaging design for the external version. Test results will show the accuracy achieved exceeds the target of 0.01%FS over a range of temperatures.

  15. Application of GPS in a high precision engineering survey network

    International Nuclear Information System (INIS)

    Ruland, R.; Leick, A.

    1985-04-01

    A GPS satellite survey was carried out with the Macrometer to support construction at the Stanford Linear Accelerator Center (SLAC). The network consists of 16 stations of which 9 stations were part of the Macrometer network. The horizontal and vertical accuracy of the GPS survey is estimated to be 1 to 2 mm and 2 to 3 mm respectively. The horizontal accuracy of the terrestrial survey, consisting of angles and distances, equals that of the GPS survey only in the ''loop'' portion of the network. All stations are part of a precise level network. The ellipsoidal heights obtained from the GPS survey and the orthometric heights of the level network are used to compute geoid undulations. A geoid profile along the linac was computed by the National Geodetic Survey in 1963. This profile agreed with the observed geoid within the standard deviation of the GPS survey. Angles and distances were adjusted together (TERRA), and all terrestrial observations were combined with the GPS vector observations in a combination adjustment (COMB). A comparison of COMB and TERRA revealed systematic errors in the terrestrial solution. A scale factor of 1.5 ppM +- .8 ppM was estimated. This value is of the same magnitude as the over-all horizontal accuracy of both networks. 10 refs., 3 figs., 5 tabs

  16. Clinical investigation of 14C-urea breath test

    International Nuclear Information System (INIS)

    Yu Yongli; Zhu Ruisen; Ji Hong; Luo Quanyong

    2000-01-01

    To investigate clinical value of 14 C-urea breath test ( 14 C-UBT) for the diagnosis of Helicobacter pylori(Hp), 70 patients were both performed gastroscopy (taking gastric mucosae biopsy for rapid urease test and histology) and 14 C-UBT (some patients by Hp-IgG or DNAHp test also) within two days. The positive cases of both rapid urease test and histology was defined as 'gold standard' of Hp-positive, whereas the negative cases of both rapid urease test and histology as 'gold standard' of Hp-negative. The sensitivity of 14 C-UBT was 93.2%, the specificity 73.1%, and the diagnostic accuracy 85.7%. The difference (comparing with 'gold standard') was not marked (x 2 = 0.9 0.05(1) 2 = 3.84, P>0.05). But the diagnostic accuracy of 14 C-UBT (85.7%) and Hp-IgG (50%) had a marked difference (x 2 13.80>x 0.01(1) 2 = 6.64, P 14 C-UBT was easy to operate, reliable and suitable for clinical application

  17. Laboratory Experiments to Evaluate Diffusion of 14C into Nevada Test Site Carbonate Aquifer Matrix

    Energy Technology Data Exchange (ETDEWEB)

    Ronald L. Hershey; William Howcroft; Paul W. Reimus

    2003-03-01

    Determination of groundwater flow velocities at the Nevada Test Site is important since groundwater is the principal transport medium of underground radionuclides. However, 14C-based groundwater velocities in the carbonate aquifers of the Nevada Test Site are several orders of magnitude slower than velocities derived from the Underground Test Area regional numerical model. This discrepancy has been attributed to the loss or retardation of 14C from groundwater into the surrounding aquifer matrix making 14C-based groundwater ages appear much older. Laboratory experiments were used to investigate the retardation of 14C in the carbonate aquifers at the Nevada Test Site. Three sets of experiments were conducted evaluating the diffusion of 14C into the carbonate aquifer matrix, adsorption and/or isotopic exchange onto the pore surfaces of the carbonate matrix, and adsorption and/or isotopic exchange onto the fracture surfaces of the carbonate aquifer. Experimental results a nd published aquifer matrix and fracture porosities from the Lower Carbonate Aquifer were applied to a 14C retardation model. The model produced an extremely wide range of retardation factors because of the wide range of published aquifer matrix and fracture porosities (over three orders of magnitude). Large retardation factors suggest that groundwater with very little measured 14C activity may actually be very young if matrix porosity is large relative to the fracture porosity. Groundwater samples collected from highly fractured aquifers with large effective fracture porosities may have relatively small correction factors, while samples from aquifers with a few widely spaced fractures may have very large correction factors. These retardation factors were then used to calculate groundwater velocities from a proposed flow path at the Nevada Test Site. The upper end of the range of 14C correction factors estimated groundwater velocities that appear to be at least an order of magnitude too high compared

  18. Metabolic patterns of 14C incorporation by selected vascular plants following field incubations with acetate-2-14C in two plant successional stages in Glacier Bay, Alaska

    International Nuclear Information System (INIS)

    Wu, Pei-Hsing Lin

    1975-01-01

    Metabolic patterns of some vascular plants (Dryas sp., Vaccinium sp., Salix sp., Alnus sp., Epilobium sp.), occurring in successional habitats, following acetate-2- 14 C incubations in the field were demonstrated for the first time. Relative radioactivity within the alcoholic soluble fraction of each species reflects its distribution in successional communities. A high level of 14 C-sugars was present in the plants of the pioneer community; on the other hand a high level of 14 C-organic acids was present in the plants of the forest community. Three patterns, based on the relative activities of the sugar- and organic acid-pools were noted which correspond to the range and the frequency of occurrence of each species in the successional stages. Only two types of 14 C-amino acid levels were noted corresponding to the range of distribution. Plants having less than 10% relative radioactivity in amino acid-pools had a limited range of distribution and reside in only one habitat; plants having more than 10% radioactivity showed wider ranges of distribution occurring in at least two habitats. (auth.)

  19. Distribution of 14C after oral administration of [1-14C]linoleic acid in rats fed different levels of essential fatty acids

    International Nuclear Information System (INIS)

    Becker, W.

    1984-01-01

    Rats from an inbred Sprague-Dawley strain were fed semisynthetic diets with a low [0.3 energy percent (en %)], normal (3 en %) or high (10 en %) content of essential fatty acids (EFA) for at least three generations. Twenty-nine- to 33-day-old male rats were given a single intragastric dose of [1-14C]linoleic acid in olive oil, and the respiratory CO2, urine and feces were collected for 46 hours (expt 1) or 20 hours (expt 2). The 14C activity in respiratory CO2, feces, urine and the carcass was determined in both experiments. In experiment 2 it was also measured in samples of the brown fat, liver, adrenals, white fat, skeletal muscles and brain. In both experiments the rats fed the low EFA diet retained significantly more 14C activity than the rats fed the normal or high EFA diets. In all groups the concentration of label was highest in the brown fat and the adrenals, but the above differences among the groups with respect to 14C retention were mainly observed in the liver, skeletal muscles and brain

  20. Tracer experiment administering L-phenylalanine-U-14C and L-tyrosine-U-14C to the tissue slices of bamboo shoots

    International Nuclear Information System (INIS)

    Kozukue, E.; Mizuno, S.

    1987-01-01

    Uniformly 14 C-labeled L-phenylalanine and L-tyrosine were administered to tissue slices of both top and base sections of bamboo shoots. Alcohol soluble substances were extracted and then separated into organic acid, sugar and amino acid fractions by ion exchange chromatography. The homogentisic acid fraction among the organic acids was collected by high-performance liquid chromatography (HPLC) and its radioactivity was measured, while the alcohol insoluble residue was used for the analysis of lignin aldehyde by the method of alkaline nitrobenzene oxidation. 1. The two labeled amino acids were steadily incorporated into the tissues during incubation and rapidly converted to organic acid, sugar and alcohol insoluble residue, especially the latter. 2. On determining the amount of phenylalanine converted to tyrosine, it was found that this was extremely small. 3. The incorporation of phenylalanine-U- 14 C into alcohol insoluble residue was higher than that of tyrosine in both sections. 4. Although the conversion into lignin aldehyde from phenylalanine-U- 14 C was higher than that from tyrosine-U- 14 C, it was found that tyrosine incorporated into the shoots was converted to a remarkable extent for formation of lignin aldehyde. 5. The incorporation of phenylalanine and tyrosine into homogentisic acid was very low. From these results, we assume that the conversion of phenylalanine to tyrosine or of tyrosine to homogentisic acid is very small, and that a part of the high amount of tyrosine in the shoots may be used for formation of lignin

  1. High-speed precision weighing of pharmaceutical capsules

    International Nuclear Information System (INIS)

    Bürmen, Miran; Pernuš, Franjo; Likar, Boštjan

    2009-01-01

    In this paper, we present a cost-effective method for fast and accurate in-line weighing of hard gelatin capsules based on the optimized capacitance sensor and real-time processing of the capsule capacitance profile resulting from 5000 capacitance measurements per second. First, the effect of the shape and size of the capacitive sensor on the sensitivity and stability of the measurements was investigated in order to optimize the performance of the system. The method was tested on two types of hard gelatin capsules weighing from 50 mg to 650 mg. The results showed that the capacitance profile was exceptionally well correlated with the capsule weight with the correlation coefficient exceeding 0.999. The mean precision of the measurements was in the range from 1 mg to 3 mg, depending on the size of the capsule and was significantly lower than the 5% weight tolerances usually used by the pharmaceutical industry. Therefore, the method was found feasible for weighing pharmaceutical hard gelatin capsules as long as certain conditions are met regarding the capsule fill properties and environment stability. The proposed measurement system can be calibrated by using only two or three sets of capsules with known weight. However, for most applications it is sufficient to use only empty and nominally filled capsules for calibration. Finally, a practical application of the proposed method showed that a single system is capable of weighing around 75 000 capsules per hour, while using multiple systems could easily increase the inspection rate to meet almost any requirements

  2. Calibration of the 14C timescale over the past 30,000 years using mass spectrometric U-Th ages from Barbados corals

    International Nuclear Information System (INIS)

    Bard, E.; Hamelin, B.; Fairbanks, R.G.; Zindler, A.

    1990-01-01

    Uranium-thorium ages obtained by mass spectrometry from corals raised off the island of Barbados confirm the high precision of this technique over at least the past 30,000 years. Comparison of the U-Th ages with 14 C ages obtained on the Holocene samples shows that the U-Th ages are accurate, because they accord with the dendrochronological calibration. Before 9,000 yr BP the 14 C ages are systematically younger than the U-Th ages, with a maximum difference of ∼3,500 yr at ∼20,000 yr BP. The U-Th technique thus provides a way of calibrating the radiocarbon timescale beyond the range of dendrochronological calibration. (author)

  3. Current /sup 14/C methods for measuring primary production: gross underestimates in oceanic waters

    Energy Technology Data Exchange (ETDEWEB)

    Gieskes, W W.C.; Kraay, G W; Baars, M A [Netherlands Institute for Sea Research, Texel, Netherlands

    1979-10-01

    The amount of organic matter produced through autotrophic processes in the euphotic zone of the tropical open ocean and available for respiration of autotrophs and heterotrophs was at least 5 to 15 times higher than values derived from the common /sup 14/C method suggested. The new estimates are based on measurements of /sup 14/C incorporation in organic matter of ocean samples incubated in bottles of up to 4 litres. Oceanic phytoplankton appeared to have a high growth rate, with generation times of hours, not days. High heterotrophic activity, finding its expression in high dark fixation rates of /sup 14/C, took place in conjunction with this high primary production of organic matter.

  4. Fine structures in 14C emission of 223Ra and 224Ra

    International Nuclear Information System (INIS)

    Hourani, E.; Rosier, L.; Berrier-Ronsin, G.; Elayi, A.; Mueller, A.C.; Rappenecker, G.; Rotbard, G.; Renou, G.; Liebe, A.; Stab, L.

    1991-01-01

    The measurement of the energy spectrum of 14 C nuclei emitted in the spontaneous radioactivity from 223 Ra and 224 Ra has been carried out, using thin and intense sources (480 MBq for 223 Ra and 3550 MBq for 224 Ra). The sources were obtained by implanting mass-separated beams from ISOLDE (CERN) into Al and vitreous C catchers. The measurement was performed with the supraconducting solenoidal spectrometer SOLENO installed at Orsay. The discovery, of a fine structure in the energy spectrum of 14 C emission from 223 Ra, which is analogous to the one known for α emission, is confirmed. Only 13% of the branching ratio in 14 C decay leads to the ground state of the residual nucleus, while 8l% to the first excited state. For 14 C emission of 224 Ra, a lower limit of 2 for the hindrance factor has been measured for the transition to the first excited state in the residual nucleus. Also, a precise identification in Z with a E·ΔE telescope has been performed for the radiation from the 223 Ra source. (author) 22 refs., 11 figs., 1 tab

  5. Local variations in {sup 14}C - How is bomb-pulse dating of human tissues and cells affected?

    Energy Technology Data Exchange (ETDEWEB)

    Stenstroem, Kristina, E-mail: Kristina.Stenstrom@nuclear.lu.s [Lund University, Department of Physics, Division of Nuclear Physics, Box 118, SE-221 00 Lund (Sweden); Skog, Goeran [Lund University, GeoBiosphere Science Centre, Geocentrum II, Soelvegatan 12, SE-223 672 Lund (Sweden); Nilsson, Carl Magnus [Lund University, Department of Physics, Division of Nuclear Physics, Box 118, SE-221 00 Lund (Sweden); Lund University, Department of Medical Radiation Physics, Malmoe University Hospital, SE-205 02 Malmoe (Sweden); Hellborg, Ragnar [Lund University, Department of Physics, Division of Nuclear Physics, Box 118, SE-221 00 Lund (Sweden); Svegborn, Sigrid Leide [Lund University, Department of Medical Radiation Physics, Malmoe University Hospital, SE-205 02 Malmoe (Sweden); Georgiadou, Elisavet [Lund University, Department of Physics, Division of Nuclear Physics, Box 118, SE-221 00 Lund (Sweden); Mattsson, Soeren [Lund University, Department of Medical Radiation Physics, Malmoe University Hospital, SE-205 02 Malmoe (Sweden)

    2010-04-15

    Atmospheric nuclear weapons testing in the late 1950s and early 1960s almost doubled the amount of {sup 14}C in the atmosphere. The resulting {sup 14}C 'bomb-pulse' has been shown to provide useful age information in e.g. forensic and environmental sciences, biology and the geosciences. The technique is also currently being used for retrospective cell dating in man, in order to provide insight into the rate of formation of new cells in the human body. Bomb-pulse dating relies on precise measurements of the declining {sup 14}C concentration in atmospheric CO{sub 2} collected at clean-air sites. However, it is not always recognized that the calculations can be complicated in some cases by significant local variations in the specific activity of {sup 14}C in carbon in the air and foodstuff. This paper presents investigations of local {sup 14}C variations in the vicinities of nuclear installations and laboratories using {sup 14}C. Levels of {sup 14}C in workers using this radioisotope are also discussed.

  6. 14C emission from Swedish nuclear power plants and its effect on the 14C levels in the environment

    International Nuclear Information System (INIS)

    Stenstroem, K.; Erlandsson, Bengt; Hellborg, R.; Kiisk, M.; Persson, Per; Mattsson, Soeren; Thornberg, C.; Skog, G.

    2000-02-01

    The radionuclide 14 C is produced in all types of nuclear reactors mainly by neutron induced reactions in oxygen ( 17 O), nitrogen ( 14 N) and carbon ( 13 C). Part of the 14 C created is continuously released during normal operation as airborne effluents in various chemical forms (such as CO 2 , CO and hydrocarbons) to the surroundings. Because of the biological importance of carbon and the long physical half-life of 14 C, it is of interest to measure the releases and their incorporation into living material. The 14 C activity concentrations in annual tree rings and air around two Swedish nuclear power plants (Barsebaeck and Forsmark) as well as the background 14 C activity levels from two reference sites in southern Sweden during 1973-1996 are presented in this report. In order to verify the reliability of the method some investigations have been conducted at two foreign nuclear sites, Sellafield fuel reprocessing plant in England, and Pickering nuclear generating station in Canada, where the releases of 14 C are known to be substantial. Furthermore, results from some measurements in the vicinity of Paldiski submarine training centre in Estonia are presented. The results of the 14 C measurements of air, vegetation and annual tree rings around the two Swedish nuclear power plants show very low enhancements of 14 C, if at all above the uncertainty of the measurements. Even if the accuracy of the measurements of the annual tree rings is rather good (1-2%) the contribution of 14 C from the reactors to the environment is so small that it is difficult to separate it from the prevailing background levels of 14 C . This is the case for all sampling procedures: in air and vegetation as well as in annual tree rings. Only on a few occasions an actual increase is observed. However, although the calculations suffer from rather large uncertainties, the calculated release rate from Barsebaeck is in fair agreement with reported release data. The results of this investigation show

  7. Synthesis of [21-14C]-fusarin C by enzymic demethylation and remethylation with [14C]-diazomethane

    International Nuclear Information System (INIS)

    Lu, S.-J.; Li, M.H.

    1989-01-01

    Fusarin C, a potent mutagen isolated from Fusarium moniliforme culture extracts, has been prepared radiolabeled in two steps by enzymic hydrolysis of the 21-methyl ester group, using phenobarbital induced microsomal preparations, followed by remethylation using [ 14 F]-diazomethane. Yields, based upon fusarin C, were essentially quantitative and approximately 10% of the [ 14 C]-methyl-nitrosourea, converted to diazomethane, reacted to yield [ 14 C]-fusarin C. (author)

  8. Parton distributions from high-precision collider data

    Energy Technology Data Exchange (ETDEWEB)

    Ball, Richard D.; Del Debbio, Luigi; Groth-Merrild, Patrick [University of Edinburgh, The Higgs Centre for Theoretical Physics, Edinburgh (United Kingdom); Bertone, Valerio; Hartland, Nathan P.; Rojo, Juan [VU University, Department of Physics and Astronomy, Amsterdam (Netherlands); Nikhef Theory Group, Amsterdam (Netherlands); Carrazza, Stefano [CERN, Theoretical Physics Department, Geneva (Switzerland); Forte, Stefano [Universita di Milano, Tif Lab, Dipartimento di Fisica, Milano (Italy); INFN, Sezione di Milano, Milano (Italy); Guffanti, Alberto [Universita di Torino, Dipartimento di Fisica, Turin (Italy); INFN, Sezione di Torino, Turin (Italy); Kassabov, Zahari [Universita di Milano, Tif Lab, Dipartimento di Fisica, Milano (Italy); INFN, Sezione di Milano, Milano (Italy); Universita di Torino, Dipartimento di Fisica, Turin (Italy); INFN, Sezione di Torino, Turin (Italy); Latorre, Jose I. [Universitat de Barcelona, Departament de Fisica Quantica i Astrofisica, Barcelona (Spain); National University of Singapore, Center for Quantum Technologies, Singapore (Singapore); Nocera, Emanuele R.; Rottoli, Luca; Slade, Emma [University of Oxford, Rudolf Peierls Centre for Theoretical Physics, Oxford (United Kingdom); Ubiali, Maria [University of Cambridge, Cavendish Laboratory, HEP Group, Cambridge (United Kingdom); Collaboration: NNPDF Collaboration

    2017-10-15

    We present a new set of parton distributions, NNPDF3.1, which updates NNPDF3.0, the first global set of PDFs determined using a methodology validated by a closure test. The update is motivated by recent progress in methodology and available data, and involves both. On the methodological side, we now parametrize and determine the charm PDF alongside the light-quark and gluon ones, thereby increasing from seven to eight the number of independent PDFs. On the data side, we now include the D0 electron and muon W asymmetries from the final Tevatron dataset, the complete LHCb measurements of W and Z production in the forward region at 7 and 8 TeV, and new ATLAS and CMS measurements of inclusive jet and electroweak boson production. We also include for the first time top-quark pair differential distributions and the transverse momentum of the Z bosons from ATLAS and CMS. We investigate the impact of parametrizing charm and provide evidence that the accuracy and stability of the PDFs are thereby improved. We study the impact of the new data by producing a variety of determinations based on reduced datasets. We find that both improvements have a significant impact on the PDFs, with some substantial reductions in uncertainties, but with the new PDFs generally in agreement with the previous set at the one-sigma level. The most significant changes are seen in the light-quark flavor separation, and in increased precision in the determination of the gluon. We explore the implications of NNPDF3.1 for LHC phenomenology at Run II, compare with recent LHC measurements at 13 TeV, provide updated predictions for Higgs production cross-sections and discuss the strangeness and charm content of the proton in light of our improved dataset and methodology. The NNPDF3.1 PDFs are delivered for the first time both as Hessian sets, and as optimized Monte Carlo sets with a compressed number of replicas. (orig.)

  9. Characterization of 14C in Swedish light water reactors.

    Science.gov (United States)

    Magnusson, Asa; Aronsson, Per-Olof; Lundgren, Klas; Stenström, Kristina

    2008-08-01

    This paper presents the results of a 4-y investigation of 14C in different waste streams of both boiling water reactors (BWRs) and pressurized water reactors (PWRs). Due to the potential impact of 14C on human health, minimizing waste and releases from the nuclear power industry is of considerable interest. The experimental data and conclusions may be implemented to select appropriate waste management strategies and practices at reactor units and disposal facilities. Organic and inorganic 14C in spent ion exchange resins, process water systems, ejector off-gas and replaced steam generator tubes were analyzed using a recently developed extraction method. Separate analysis of the chemical species is of importance in order to model and predict the fate of 14C within process systems as well as in dose calculations for disposal facilities. By combining the results of this investigation with newly calculated production rates, mass balance assessments were made of the 14C originating from production in the coolant. Of the 14C formed in the coolant of BWRs, 0.6-0.8% was found to be accumulated in the ion exchange resins (core-specific production rate in the coolant of a 2,500 MWth BWR calculated to be 580 GBq GW(e)(-1) y(-1)). The corresponding value for PWRs was 6-10% (production rate in a 2,775 MWth PWR calculated to be 350 GBq GW(e)(-1) y(-1)). The 14C released with liquid discharges was found to be insignificant, constituting less than 0.5% of the production in the coolant. The stack releases, routinely measured at the power plants, were found to correspond to 60-155% of the calculated coolant production, with large variations between the BWR units.

  10. A novel power source for high-precision, highly efficient micro w-EDM

    International Nuclear Information System (INIS)

    Chen, Shun-Tong; Chen, Chi-Hung

    2015-01-01

    The study presents the development of a novel power source for high-precision, highly efficient machining of micropart microstructures using micro wire electrical discharge machining (w-EDM). A novel power source based on a pluri resistance–capacitance (pRC) circuit that can generate a high-frequency, high-peak current with a short pulse train is proposed and designed to enhance the performance of micro w-EDM processes. Switching between transistors is precisely controlled in the designed power source to create a high-frequency short-pulse train current. Various microslot cutting tests in both aluminum and copper alloys are conducted. Experimental results demonstrate that the pRC power source creates instant spark erosion resulting in markedly less material for removal, diminishing discharge crater size, and consequently an improved surface finish. A new evaluation approach for spark erosion ability (SEA) to assess the merits of micro EDM power sources is also proposed. In addition to increasing the speed of micro w-EDM by increasing wire feed rates by 1.6 times the original feed rate, the power source is more appropriate for machining micropart microstructures since there is less thermal breaking. Satisfactory cutting of an elaborate miniature hook-shaped structure and a high-aspect ratio microstructure with a squared-pillar array also reveal that the developed pRC power source is effective, and should be very useful in the manufacture of intricate microparts. (paper)

  11. High precision, low disturbance calibration of the High Voltage system of the CMS Barrel Electromagnetic Calorimeter

    CERN Document Server

    Marzocchi, Badder

    2017-01-01

    The CMS Electromagnetic Calorimeter is made of scintillating lead tungstate crystals, using avalanche photodiodes (APD) as photo-detectors in the barrel part. The high voltage system, consisting of 1224 channels, biases groups of 50 APD pairs, each at a voltage of about 380 V. The APD gain dependence on the voltage is 3pct/V. A stability of better than 60 mV is needed to have negligible impact on the calorimeter energy resolution. Until 2015 manual calibrations were performed yearly. A new calibration system was deployed recently, which satisfies the requirement of low disturbance and high precision. The system is discussed in detail and first operational experience is presented.

  12. SynUTC - high precision time synchronization over ethernet networks

    CERN Document Server

    Höller, R; Horauer, M; Kerö, N; Schmid, U; Schossmaier, K

    2002-01-01

    This article describes our SynUTC (Synchronized Universal Time Coordinated) technology, which enables high-accuracy distribution of GPS time and time synchronization of network nodes connected via standard Ethernet LANs. By means of exchanging data packets in conjunction with moderate hardware support at nodes and switches, an overall worst-case accuracy in the range of some 100 ns can be achieved, with negligible communication overhead. Our technology thus improves the 1 ms-range accuracy achievable by conventional, software-based approaches like NTP by 4 orders of magnitude. Applications can use the high-accuracy global time provided by SynUTC for event timestamping and event generation both at hardware and software level. SynUTC is based upon inserting highly accurate time information into dedicated data packets at the media-independent interface (MII) between the physical layer transceiver and the network controller upon packet transmission and reception, respectively. As a consequence, every node has acc...

  13. High precision 16K, 16 channel peak sensing CAMAC ADC

    International Nuclear Information System (INIS)

    Jain, Mamta; Subramaniam, E.T

    2013-01-01

    A high density, peak sensing, analog to digital converter (ADC) double width module with CAMAC back plane has been developed for nuclear physics experiments with a large number of detectors. This module has sixteen independent channels in plug-in daughter card mother board mode

  14. In-plane laser forming for high precision alignment

    NARCIS (Netherlands)

    Folkersma, Ger; Römer, Gerardus Richardus, Bernardus, Engelina; Brouwer, Dannis Michel; Huis in 't Veld, Bert

    2014-01-01

    Laser microforming is extensively used to align components with submicrometer accuracy, often after assembly. While laser-bending sheet metal is the most common laser-forming mechanism, the in-plane upsetting mechanism is preferred when a high actuator stiffness is required. A three-bridge planar

  15. Precision High-Voltage DC Dividers and Their Calibration

    Czech Academy of Sciences Publication Activity Database

    Dragounová, Naděžda

    2005-01-01

    Roč. 54, č. 5 (2005), s. 1911-1915 ISSN 0018-9456 R&D Projects: GA AV ČR KSK1048102; GA ČR GA202/03/0889 Keywords : calibration * dc voltage * high voltage (HV) Subject RIV: JA - Electronics ; Optoelectronics, Electrical Engineering Impact factor: 0.665, year: 2005

  16. Various high precision measurements of pressure in atomic energy industry

    International Nuclear Information System (INIS)

    Aritomi, Masanori; Inoue, Akira; Hosoma, Takashi; Tanaka, Izumi; Gabane, Tsunemichi.

    1987-01-01

    As for the pressure measurement in atomic energy industry, it is mostly the measurement using differential pressure transmitters and pressure transmitters for process measurement with the general accuracy of measurement of 0.2 - 0.5 % FS/year. However, recently for the development of nuclear fusion reactors and the establishment of nuclear fuel cycle accompanying new atomic energy technology, there are the needs of the pressure measurement having higher accuracy of 0.01 % FS/year and high resolution, and quartz vibration type pressure sensors appeared. New high accuracy pressure measurement techniques were developed by the advance of data processing and the rationalization of data transmission. As the results, the measurement of the differential pressure of helium-lithium two-phase flow in the cooling system of nuclear fusion reactors, the high accuracy measuring system for the level of plutonium nitrate and other fuel substance in tanks in fuel reprocessing and conversion, the high accuracy measurement of atmospheric pressure and wind velocity in ducts, chimneys and tunnels in nuclear facilities and so on became feasible. The principle and the measured data of quartz vibration type pressure sensors are shown. (Kako, I.)

  17. Charged particle reaction studies on /sup 14/C. [Spectroscopic factors

    Energy Technology Data Exchange (ETDEWEB)

    Cecil, F E; Shepard, J R; Anderson, R E; Peterson, R J; Kaczkowski, P [Colorado Univ., Boulder (USA). Nuclear Physics Lab.

    1975-12-22

    The reactions /sup 14/C(p,d), (d,d') and (d,p) have been measured for E/sub p/ = 27 MeV and E/sub d/ = 17 MeV. The (d,d') and (d,p) reactions were studied between theta/sub lab/ = 15/sup 0/ and 85/sup 0/; the (p,d) reactions, between theta/sub lab/ = 5/sup 0/ and 40/sup 0/. The /sup 14/C deformation parameters were deduced from the deuteron inelastic scattering and found to agree with deformations measured in nearby doubly even nuclei. The spectroscopic factors deduced from the (p,d) reaction allowed a /sup 14/C ground-state wave function to be deduced which compares favorably with a theoretically deduced wave function. The (p,d) and (d,p) spectroscopic factors are consistent. The implications of our /sup 14/C ground-state wave function regarding the problem of the /sup 14/C hindered beta decay are discussed.

  18. High-Precision Registration of Point Clouds Based on Sphere Feature Constraints

    Directory of Open Access Journals (Sweden)

    Junhui Huang

    2016-12-01

    Full Text Available Point cloud registration is a key process in multi-view 3D measurements. Its precision affects the measurement precision directly. However, in the case of the point clouds with non-overlapping areas or curvature invariant surface, it is difficult to achieve a high precision. A high precision registration method based on sphere feature constraint is presented to overcome the difficulty in the paper. Some known sphere features with constraints are used to construct virtual overlapping areas. The virtual overlapping areas provide more accurate corresponding point pairs and reduce the influence of noise. Then the transformation parameters between the registered point clouds are solved by an optimization method with weight function. In that case, the impact of large noise in point clouds can be reduced and a high precision registration is achieved. Simulation and experiments validate the proposed method.

  19. A high precision radiation-tolerant LVDT conditioning module

    CERN Document Server

    Masi, A; Losito, R; Peronnard, P; Secondo, R; Spiezia, G

    2014-01-01

    Linear variable differential transformer (LVDT) position sensors are widely used in particle accelerators and nuclear plants, thanks to their properties of contact-less sensing, radiation tolerance, infinite resolution, good linearity and cost efficiency. Many applications require high reading accuracy, even in environments with high radiation levels, where the conditioning electronics must be located several hundred meters away from the sensor. Sometimes even at long distances the conditioning module is still exposed to ionizing radiation. Standard off-the-shelf electronic conditioning modules offer limited performances in terms of reading accuracy and long term stability already with short cables. A radiation tolerant stand-alone LVDT conditioning module has been developed using Commercial Off-The-Shelf (COTS) components. The reading of the sensor output voltages is based on a sine-fit algorithm digitally implemented on an FPGA ensuring few micrometers reading accuracy even with low signal-to-noise ratios. ...

  20. Ultrasmooth, Highly Spherical Monocrystalline Gold Particles for Precision Plasmonics

    KAUST Repository

    Lee, You-Jin

    2013-12-23

    Ultrasmooth, highly spherical monocrystalline gold particles were prepared by a cyclic process of slow growth followed by slow chemical etching, which selectively removes edges and vertices. The etching process effectively makes the surface tension isotropic, so that spheres are favored under quasi-static conditions. It is scalable up to particle sizes of 200 nm or more. The resulting spherical crystals display uniform scattering spectra and consistent optical coupling at small separations, even showing Fano-like resonances in small clusters. The high monodispersity of the particles we demonstrate should facilitate the self-assembly of nanoparticle clusters with uniform optical resonances, which could in turn be used to fabricate optical metafluids. Narrow size distributions are required to control not only the spectral features but also the morphology and yield of clusters in certain assembly schemes. © 2013 American Chemical Society.

  1. New high-precision deep concave optical surface manufacturing capability

    Science.gov (United States)

    Piché, François; Maloney, Chris; VanKerkhove, Steve; Supranowicz, Chris; Dumas, Paul; Donohue, Keith

    2017-10-01

    This paper describes the manufacturing steps necessary to manufacture hemispherical concave aspheric mirrors for high- NA systems. The process chain is considered from generation to final figuring and includes metrology testing during the various manufacturing steps. Corning Incorporated has developed this process by taking advantage of recent advances in commercially available Satisloh and QED Technologies equipment. Results are presented on a 100 mm concave radius nearly hemispherical (NA = 0.94) fused silica sphere with a better than 5 nm RMS figure. Part interferometric metrology was obtained on a QED stitching interferometer. Final figure was made possible by the implementation of a high-NA rotational MRF mode recently developed by QED Technologies which is used at Corning Incorporated for production. We also present results from a 75 mm concave radius (NA = 0.88) Corning ULE sphere that was produced using sub-aperture tools from generation to final figuring. This part demonstrates the production chain from blank to finished optics for high-NA concave asphere.

  2. A high-precision algorithm for axisymmetric flow

    Directory of Open Access Journals (Sweden)

    A. Gokhman

    1995-01-01

    Full Text Available We present a new algorithm for highly accurate computation of axisymmetric potential flow. The principal feature of the algorithm is the use of orthogonal curvilinear coordinates. These coordinates are used to write down the equations and to specify quadrilateral elements following the boundary. In particular, boundary conditions for the Stokes' stream-function are satisfied exactly. The velocity field is determined by differentiating the stream-function. We avoid the use of quadratures in the evaluation of Galerkin integrals, and instead use splining of the boundaries of elements to take the double integrals of the shape functions in closed form. This is very accurate and not time consuming.

  3. High precision neutron interferometer setup S18b

    International Nuclear Information System (INIS)

    Hasegawa, Y.; Lemmel, H.

    2011-01-01

    The present setup at S18 is a multi purpose instrument. It is used for both interferometry and a Bonse-Hart camera for USANS (Ultra Small Angle Neutron Scattering) spectroscopy with wide range tunability of wavelength. Some recent measurements demand higher stability of the instrument, which made us to propose a new setup dedicated particularly for neutron interferometer experiments requiring high phase stability. To keep both options available, we suggest building the new setup in addition to the old one. By extending the space of the present setup by 1.5 m to the upstream, both setups can be accommodated side by side. (authors)

  4. Combination spindle-drive system for high precision machining

    Science.gov (United States)

    Gerth, Howard L.

    1977-07-26

    A combination spindle-drive is provided for fabrication of optical quality surface finishes. Both the spindle-and-drive utilize the spindle bearings for support, thereby removing the conventional drive-means bearings as a source of vibration. An airbearing spindle is modified to carry at the drive end a highly conductive cup-shaped rotor which is aligned with a stationary stator to produce torque in the cup-shaped rotor through the reaction of eddy currents induced in the rotor. This arrangement eliminates magnetic attraction forces and all force is in the form of torque on the cup-shaped rotor.

  5. A high precision radiation-tolerant LVDT conditioning module

    Energy Technology Data Exchange (ETDEWEB)

    Masi, A. [EN/STI Group, CERN - European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Danzeca, S. [EN/STI Group, CERN - European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); IES, F-34000 Montpellier (France); Losito, R.; Peronnard, P. [EN/STI Group, CERN - European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Secondo, R., E-mail: raffaello.secondo@cern.ch [EN/STI Group, CERN - European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Spiezia, G. [EN/STI Group, CERN - European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland)

    2014-05-01

    Linear variable differential transformer (LVDT) position sensors are widely used in particle accelerators and nuclear plants, thanks to their properties of contact-less sensing, radiation tolerance, infinite resolution, good linearity and cost efficiency. Many applications require high reading accuracy, even in environments with high radiation levels, where the conditioning electronics must be located several hundred meters away from the sensor. Sometimes even at long distances the conditioning module is still exposed to ionizing radiation. Standard off-the-shelf electronic conditioning modules offer limited performances in terms of reading accuracy and long term stability already with short cables. A radiation tolerant stand-alone LVDT conditioning module has been developed using Commercial Off-The-Shelf (COTS) components. The reading of the sensor output voltages is based on a sine-fit algorithm digitally implemented on an FPGA ensuring few micrometers reading accuracy even with low signal-to-noise ratios. The algorithm validation and board architecture are described. A full metrological characterization of the module is reported and radiation tests results are discussed.

  6. Metabolism and disposition of [14C]-methylcyclosiloxanes in rats.

    Science.gov (United States)

    Domoradzki, Jeanne Y; Sushynski, Christopher M; Sushynski, Jacob M; McNett, Debra A; Van Landingham, Cynthia; Plotzke, Kathleen P

    2017-10-20

    Octamethylcyclotetrasiloxane (D 4 ) and decamethylcyclopentasiloxane (D 5 ) are low molecular weight cyclic volatile methyl siloxanes (cVMSs) primarily used as intermediates or monomers in the production of high molecular weight silicone polymers. The use of D 4 as a direct ingredient in personal care products has declined significantly over the past 20 years, although it may be present as a residual impurity in a variety of consumer products. D 5 is still used as an intentional ingredient in cosmetics, consumer products and in dry cleaning. Persons who may be exposed include occupational exposure for workers, and potential inhalation or dermal exposure for consumers and the general public. Because of the diverse use, especially of D 5 , and the potential for human exposure, a comprehensive program was undertaken to understand the kinetics, metabolism, enzyme induction and toxicity of D 4 and D 5 in rats following relevant routes of exposure. Physiologically based pharmacokinetic (PBPK) models utilizing these studies have been reported for D 4 and D 5 in the rat and human following dermal and inhalation exposures, with the oral uptake component of the model being limited in its description. Data from high dose oral studies in corn oil and simethicone vehicles and neat were used in the D 4 /D 5 harmonized PBPK model development. It was uncertain if the inability to adequately describe the oral uptake was due to unrealistic high doses or unique aspects of the chemistry of D 4 /D 5. Low dose studies were used to provide data to refine the description of oral uptake in the model by exploring the dose dependency and the impact of a more realistic food-like vehicle. Absorption, distribution, metabolism and elimination (ADME) of D 4 and D 5 was determined following a single low oral gavage dose of 14 C-D 4 and 14 C-D 5 at 30 and 100mg/kg body weight (bw), respectively, in a rodent liquid diet. Comparison of the low vs. high dose oral gavage administration of D 4 and D 5

  7. Persistence of 14C maneb in lettuce plants an soil

    International Nuclear Information System (INIS)

    Bennaceur, M.; Sennaoui, Z.; Meguenni, H.

    1992-10-01

    Maneb residue is studied on lettuce plant and soil after spraying on greenhouse with 14C maneb. The residues declined with time. After 37 days from the application, 14C maneb residues in water extracts declined to 1,5. 10-2ug/g from 5,8. 10-1ug/g of the zero day sample in lettuce plants and 4,6. 10-3ug/g from 1,73. 10-1ug/g in soil. The 14C internals residues in lettuce and soil increase respectively till 16 days and 24 days, then decrease to 88% and 4,05% after 37 days. ETU was present in lettuce plant after 8 days then decreases with time. Two metabolites were identified by TLC (EU,ETU)

  8. Temporal distribution of bomb 14C in a forest soil

    International Nuclear Information System (INIS)

    Harkness, D.D.; Harrison, A.F.; Bacon, P.J.

    1986-01-01

    Patterns of 14 C enrichment in the superficial plant debris and mineral soil horizons of an established woodland have been monitored at regular intervals during the past 15 years. These data are compared with a model evaluation of carbon turnover based on the recorded changes in atmospheric 14 C concentration since AD 1900. Leaf litter and decomposing plant debris are characterized by steady-state turnover values of ca 2 and ca 8 years, respectively. A two-component system of fast (≤20 yr) and slow (ca 350 yr) cycling carbon is indicated for the surface (0-5cm) soil humus; below 10cm, the fast component is rare ( 14 C to the soil carbon pool

  9. High precision, low disturbance calibration of the High Voltage system of the CMS Barrel Electromagnetic Calorimeter

    CERN Document Server

    Fasanella, Giuseppe

    2017-01-01

    The CMS Electromagnetic Calorimeter utilizes scintillating lead tungstate crystals, with avalanche photodiodes (APD) as photo-detectors in the barrel part. 1224 HV channels bias groups of 50 APD pairs, each at a voltage of about 380 V. The APD gain dependence on the voltage is 3pct/V. A stability of better than 60 mV is needed to have negligible impact on the calorimeter energy resolution. Until 2015 manual calibrations were performed yearly. A new calibration system was deployed recently, which satisfies the requirement of low disturbance and high precision. The system is discussed in detail and first operational experience is presented.

  10. High precision, low disturbance calibration of the High Voltage system of the CMS Barrel Electromagnetic Calorimeter

    CERN Document Server

    Fasanella, Giuseppe

    2016-01-01

    The CMS Electromagnetic Calorimeter utilizes scintillating lead tungstate crystals, with avalanche photodiodes (APD) as photo-detectors in the barrel part. 1224 HV channels bias groups of 50 APD pairs, each at a voltage of about 380 V. The APD gain dependence on the voltage is 3pct/V. A stability of better than 60 mV is needed to have negligible impact on the calorimeter energy resolution. Until 2015 manual calibrations were performed yearly. A new calibration system was deployed recently, which satisfies the requirement of low disturbance and high precision. The system is discussed in detail and first operational experience is presented.

  11. High-precision numerical integration of equations in dynamics

    Science.gov (United States)

    Alesova, I. M.; Babadzanjanz, L. K.; Pototskaya, I. Yu.; Pupysheva, Yu. Yu.; Saakyan, A. T.

    2018-05-01

    An important requirement for the process of solving differential equations in Dynamics, such as the equations of the motion of celestial bodies and, in particular, the motion of cosmic robotic systems is high accuracy at large time intervals. One of effective tools for obtaining such solutions is the Taylor series method. In this connection, we note that it is very advantageous to reduce the given equations of Dynamics to systems with polynomial (in unknowns) right-hand sides. This allows us to obtain effective algorithms for finding the Taylor coefficients, a priori error estimates at each step of integration, and an optimal choice of the order of the approximation used. In the paper, these questions are discussed and appropriate algorithms are considered.

  12. Extraction of 14C-labeled photosynthate from aquatic plants with dimethyl sulfoxide (DMSO)

    International Nuclear Information System (INIS)

    Filbin, G.J.; Hough, R.A.

    1984-01-01

    DMSO was tested as a solvent to extract 14 C-labeled photosynthate from three species of aquatic plants in photosynthesis measurements and compared with the dry oxidation method for plant radioassay. Extraction of ca. 300 mg of fresh or rehydrated dry plant tissue samples in 10 ml of reagent-grade DMSO for 8h at 65 0 C resulted in a stable, nonviscous solution with excellent liquid scintillation counting characteristics. Extraction efficiency was in the range of 96-99% of fixed 14 C, and precision was comparable to, or better than, that obtained with dry oxidation. The method is simple and inexpensive, and for fresh tissue the same sample extracts can be used for chlorophyll analyses

  13. AMS of {sup 14}C at low energies

    Energy Technology Data Exchange (ETDEWEB)

    Suter, M.; Huber, R.; Jacob, S. [ETHZ, Zurich (Switzerland); Synal, H.A. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    At the ETH/PSI AMS facility {sup 14}C test measurements have been performed at low terminal voltages of 0.5 and 1 MV in order to study the feasibility of AMS with very small accelerators. These experiments have demonstrated that interfering molecules ({sup 13}CH and {sup 12}CH{sub 2}) in charge states 1{sup +} and 2{sup +} can be destroyed in an adequate Ar gas stripper. These new results imply the feasibility of a new generation of very small accelerator systems for {sup 14}C. (author) 1 fig., 3 refs.

  14. A new 14C AMS facility at IUAC, New Delhi

    International Nuclear Information System (INIS)

    Kumar, Pankaj; Ojha, S.; Sharma, R.; Gargari, S.; Joshi, R.; Chopra, S.; Kanjilal, D.

    2015-01-01

    A new state of art Accelerator Mass Spectrometry (AMS) facility for 14 C has been developed at IUAC. This facility is based on the 0.5 MV Pelletron accelerator and an Automated Graphitization Equipment (AGE). In addition to the 14 C measurements, this system has the capability to perform 10 Be and 26 AI measurements also. The system is called XCAMS i.e., Compact, Accelerator Mass Spectrometer eXtended for 10 Be and 26 AI. A detailed description of the newly developed AMS facility and the recent measurements will be discussed

  15. High precision stress measurements in semiconductor structures by Raman microscopy

    Energy Technology Data Exchange (ETDEWEB)

    Uhlig, Benjamin

    2009-07-01

    Stress in silicon structures plays an essential role in modern semiconductor technology. This stress has to be measured and due to the ongoing miniaturization in today's semiconductor industry, the measuring method has to meet certain requirements. The present thesis deals with the question how Raman spectroscopy can be used to measure the state of stress in semiconductor structures. In the first chapter the relation between Raman peakshift and stress in the material is explained. It is shown that detailed stress maps with a spatial resolution close to the diffraction limit can be obtained in structured semiconductor samples. Furthermore a novel procedure, the so called Stokes-AntiStokes-Difference method is introduced. With this method, topography, tool or drift effects can be distinguished from stress related influences in the sample. In the next chapter Tip-enhanced Raman Scattering (TERS) and its application for an improvement in lateral resolution is discussed. For this, a study is presented, which shows the influence of metal particles on the intensity and localization of the Raman signal. A method to attach metal particles to scannable tips is successfully applied. First TERS scans are shown and their impact on and challenges for high resolution stress measurements on semiconductor structures is explained. (orig.)

  16. A research of a high precision multichannel data acquisition system

    Science.gov (United States)

    Zhong, Ling-na; Tang, Xiao-ping; Yan, Wei

    2013-08-01

    The output signals of the focusing system in lithography are analog. To convert the analog signals into digital ones which are more flexible and stable to process, a desirable data acquisition system is required. The resolution of data acquisition, to some extent, affects the accuracy of focusing. In this article, we first compared performance between the various kinds of analog-to-digital converters (ADC) available on the market at the moment. Combined with the specific requirements (sampling frequency, converting accuracy, numbers of channels etc) and the characteristics (polarization, amplitude range etc) of the analog signals, the model of the ADC to be used as the core chip in our hardware design was determined. On this basis, we chose other chips needed in the hardware circuit that would well match with ADC, then the overall hardware design was obtained. Validation of our data acquisition system was verified through experiments and it can be demonstrated that the system can effectively realize the high resolution conversion of the multi-channel analog signals and give the accurate focusing information in lithography.

  17. A precision timing discriminator for high density detector systems

    International Nuclear Information System (INIS)

    Turko, B.T.; Smith, R.C.

    1992-01-01

    Most high resolution time measurement techniques require discriminators that accurately make the time arrival of events regardless of their intensity. Constant fraction discriminators or zero-crossing discriminators are generally used. In this paper, the authors describe a zero-crossing discriminator that accurately determines the peak of a quasi-Gaussian waveform by differentiating it and detecting the resulting zero-crossing. Basically, it consists of a fast voltage comparator and tow integrating networks: an RC section and an LR section used in a way that keeps the input impedance purely resistive. A time walk of 100 ps in an amplitude range exceeding 100:1 has been achieved for wave-forms from 1.5 ns to 15 ns FWHM. An arming level discriminator is added to eliminate triggering by noise. Easily implemented in either monolithic or hybrid technology, the circuit is suitable for large multichannel detector systems where size and power dissipation are crucial. Circuit diagrams and typical measured data are also presented

  18. Intelligent technologies in process of highly-precise products manufacturing

    Science.gov (United States)

    Vakhidova, K. L.; Khakimov, Z. L.; Isaeva, M. R.; Shukhin, V. V.; Labazanov, M. A.; Ignatiev, S. A.

    2017-10-01

    One of the main control methods of the surface layer of bearing parts is the eddy current testing method. Surface layer defects of bearing parts, like burns, cracks and some others, are reflected in the results of the rolling surfaces scan. The previously developed method for detecting defects from the image of the raceway was quite effective, but the processing algorithm is complicated and lasts for about 12 ... 16 s. The real non-stationary signals from an eddy current transducer (ECT) consist of short-time high-frequency and long-time low-frequency components, therefore a transformation is used for their analysis, which provides different windows for different frequencies. The wavelet transform meets these conditions. Based on aforesaid, a methodology for automatically detecting and recognizing local defects in bearing parts surface layer has been developed on the basis of wavelet analysis using integral estimates. Some of the defects are recognized by the amplitude component, otherwise an automatic transition to recognition by the phase component of information signals (IS) is carried out. The use of intelligent technologies in the manufacture of bearing parts will, firstly, significantly improve the quality of bearings, and secondly, significantly improve production efficiency by reducing (eliminating) rejections in the manufacture of products, increasing the period of normal operation of the technological equipment (inter-adjustment period), the implementation of the system of Flexible facilities maintenance, as well as reducing production costs.

  19. Effect of tolbutamide on 14C-sodium bicarbonate and 14C-alanine metabolism in isolated rat hepatocytes

    International Nuclear Information System (INIS)

    Kunjathoor, V.V.; Ye, Y.; Pillai, U.A.; Ferguson, P.W.; Medon, P.J.

    1990-01-01

    Tolbutamide (TOLB) is a sulfonylurea commonly used in the treatment of noninsulin-dependent diabetes mellitus. Studies have shown that TOLB affects gluconeogenesis and glycolysis from various substrates in the liver. Specifically, TOLB inhibits gluconeogenesis from lactate in a dose-dependent manner. In order to further clarify tolbutamide's mechanism of action, its effect on the incorporation of 14 C from NaH 14 CO 3 and 14 C-alanine into glucose, lactate or pyruvate in the presence of lactate was measured. Rat hepatocytes were incubated with lactate (2.0 mM) with or without TOLB (1.0 mM) in the presence of NaH 14 CO 3 or 14 C-alanine. TOLB inhibited the incorporation of C 14 from NaHCO 3 and alanine into glucose by 55 and 56%, respectively. TOLB did not alter the incorporation of C 14 from NaHCO 3 into lactate or pyruvate. TOLB did not affect the incorporation of 14 C from alanine into lactate but produced a pooling of 14 C as pyruvate. The authors data support studies demonstrating the TOLB produces its actions, in part, by increasing the concentration of fructose-2,6-bisphosphate and inhibiting pyruvate carboxylase

  20. Effect of commercial processing procedures on 14C-LINDANE residues in corn oil

    International Nuclear Information System (INIS)

    Soliman, S.M.

    2006-01-01

    At blooming, maize plants were sprayed twice, 23 days apart, at a dose of 22 mg equivalent to 5 μCi/ plant. At post harvest, maize seeds had a radioactivity corresponding to 0.36% of the applied dose. The insecticide residues in crude oil, cake and methanolic extract were amounted to 8 % and 60 % 5 % , respectively, of original residues inside the seeds.The 14 C-activity in the crude oil could be reduced by commercial processes locally used for refining. The refined oil had a residue level of about 0.7 ppm mainly in the form of unchanged lindane in addition to a number of chloro phenols as main metabolites. Refining of corn oil fortified with 14 C-lindane led to a high reduction of 14 C-lindane (88%). The refined oil contained a residue consisting lindane and its chloro phenols

  1. Production and uses of 14C-labelled rice straw in organic matter decomposition studies

    International Nuclear Information System (INIS)

    Capistrano, R.F.; Neue, H.N.U.

    1987-01-01

    A new systematic procedure in labeling rice homogenously with 14 CO 2 to maturity is described. It uses a modified plant growth chamber equipped with provisions for the growth requirements of rice as well as, the decontamination and safety aspects of labeling process. Uses of 14 C-labeled rice straw are described. Sample preparation using a new wet combustion set-up a high vacuum preparation line, concomitant with instruments as liquid scintillation counter, vibrating reed electrometer and radiogaschromatograph is also discussed. The turnover and behavior of 14 C-labeled rice straw in organic matter decomposition experiments on wetland soils, upland soils, greenhouse set-up and controlled laboratory conditions are concurrent researches that make use of the produced 14 C-labeled straw. Initial results are discussed. (Auth.) 16 refs.; 14 figs.; 2 tabs

  2. 14C-urea breath test for the detection of Helicobacter pylori

    International Nuclear Information System (INIS)

    Veldhuyzen van Zanten, S.J.; Tytgat, K.M.; Hollingsworth, J.; Jalali, S.; Rshid, F.A.; Bowen, B.M.; Goldie, J.; Goodacre, R.L.; Riddell, R.H.; Hunt, R.H.

    1990-01-01

    The high urease activity of Helicobacter pylori can be used to detect this bacterium by noninvasive breath tests. We have developed a 14 C-urea breath test which uses 5 microCi 14 C with 50 mg nonradioactive urea. Breath samples are collected at baseline and every 30 min for 2 h. Our study compared the outcome of the breath test to the results of histology and culture of endoscopically obtained gastric biopsies in 84 patients. The breath test discriminated well between the 50 positive patients and the 34 patients negative for Helicobacter pylori: the calculated sensitivity was 100%, specificity 88%, positive predictive value 93%, and negative predictive value 100%. Treatment with bismuth subsalicylate and/or ampicillin resulted in lower counts of exhaled 14 CO 2 which correlated with histological improvement in gastritis. The 14 C-urea breath test is a better gold standard for the detection of Helicobacter pylori than histology and/or culture

  3. Validation of 14 C-urea breath test for diagnosis of Helicobacter pylori

    International Nuclear Information System (INIS)

    Mattar, Rejane; Silva, Fernando Marcuz; Alexandrino, Ana Maria; Laudanna, Antonio Atilio

    1999-01-01

    The aim of this study was to validate the 14 C-urea breath test for use in diagnosis of Helicobacter pylori infection. Thirty H. pylori positive patients, based on histologic test and thirty H. pylori negative patients by histology and anti-H pylori IgG entered the study. Fasting patients drank 5 uCi of 14 C-urea in 20 ml of water. Breath samples were collected at O, 5, 10, 15, 20 and 30 min. The difference of cpm values between the two groups was significant at all the time intervals, besides time 0 (p 14 C-urea breath test is highly accurate for Helicobacter pylori diagnosis. It is fast, simple and should be the non-invasive test used after treating Helicobacter pylori infection. (author)

  4. Plant for retention of 14C in reprocessing plants for LWR fuel elements

    International Nuclear Information System (INIS)

    Braun, H.; Gutowski, H.; Bonka, H.; Gruendler, D.

    1983-01-01

    The 14 C produced from nuclear power plants is actually totally emitted from nuclear power plants and reprocessing plants. Using the radiation protection principles proposed in ICRP 26, 14 C should be retained at heavy water moderated reactors and reprocessing plants due to a cost-benefit analysis. In the frame of a research work to cost-benefit analysis, which was sponsored by the Federal Minister of the Interior, an industrial plant for 14 C retention at reprocessing plants for LWR fuel elements has been planned according to the double alkali process. The double alkali process has been chosen because of the sufficient operation experience in the conventional chemical technique. In order to verify some operational parameters and to gain experiences, a cold test plant was constructed. The experiment results showed that the double alkali process is a technically suitable method with high operation security. Solidifying CaCO 3 with cement gives a product fit for final disposal

  5. Fate of 14 C Labelled fungicides maneb and mancozeb during processing of contaminated soybean oil

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Hegazi, B.

    1991-01-01

    Soybeans from plants previously treated with 14 C-maneb and 14 C-mancozeb contain 0.62% and 3.15% of the applied dose, respectively. Crude soybean soil extracted from seeds was subjected to different refining processes. The effect of commercial refining processes, namely: alkali treatment, bleacking, winterization and deoderization on the nature and magnitude of the original residues was investigated. A high percentage of the residues was eliminated by alkali refining and deoderization processes. Analysis of residues after each step showed the ETU, ETM and ETD, in addition to two unknowns where the main 14 C-residues present in the oil. The refined oil contains around 1% of the residues originally present in the crude soybean oil.4 tab

  6. Synthesis of 14C labelled lidocaine (α-diethylamino acet-2,6-dimethylanilide)

    International Nuclear Information System (INIS)

    Zhou Zhentang; Qian Guojun; Lin Fenzhi; Zhuang Daoling; Zhang Yulong; He Zhanjun

    2002-01-01

    14 C-lidocaine was composed by 14 C-diethylamine reaction with ω-chloroacetic-2,6-dimethylaniline. 14 C-diethylamine was prepared from Ba 14 CO 3 via K 14 CN and 14 C-acetonitrile which was hydrogenated. Radiochemical purity of 14 C-diethylamine and 14 C-lidocaine is >99% by HPLC and TLC respectively. 14 C-lidocaine is needed for breath assay of mouse for measuring liver function

  7. Direct preparation of 14C-labelled 5-allyl- and 5-propyl-2'-deoxyuridine from [2-14C]2'-deoxyuridine

    International Nuclear Information System (INIS)

    Ruth, J.L.; White, S.K.; Bergstrom, D.E.

    1982-01-01

    [2- 14 C]5-Allyl-2'-deoxyuridine was synthesized directly from [2- 14 C]2'-deoxyuridine using mercury, palladium, and 3-chloropropene. [2- 14 C]5-Propyl-2'-deoxyuridine was obtained by hydrogenation of the [ 14 C]5-allyl-2'-deoxyuridine. Advantages of the synthetic method and its application to the preparation of other radiolabeled 5-alkyl/alkenyl-2'-deoxyuridines are discussed. (author)

  8. Δ14C level of annual plants and fossil fuel derived CO2 distribution across different regions of China

    International Nuclear Information System (INIS)

    Xi, X.T.; Ding, X.F.; Fu, D.P.; Zhou, L.P.; Liu, K.X.

    2013-01-01

    The 14 C level in annual plants is a sensitive tracer for monitoring fossil fuel derived CO 2 in the atmosphere. Corn leave samples were selected from different regions of China, including high mountains in the Tibetan Plateau, grassland in Inner Mongolia, and inland and coastal cities during the summer of 2010. The 14 C/ 12 C ratio of the samples was measured with the NEC compact AMS system at the Institute of Heavy Ion Physics, Peking University. The fossil fuel derived CO 2 was estimated by comparing the measured Δ 14 C values of corn leave samples to background atmospheric Δ 14 C level. The influences of topography, meteorological conditions and carbon cycling processes on the fossil fuel derived CO 2 concentration are considered when interpreting the data. Our results show a clear association of the low Δ 14 C values with regions where human activities are intensive.

  9. Measuring techniques for environmental sup 3 H, sup 14 C and sup 222 Rn by liquid scintillation counter

    Energy Technology Data Exchange (ETDEWEB)

    Takata, Shigeru; Saito, Masaaki (Tokyo Metropolitan Isotope Research Center (Japan))

    1991-02-01

    Measuring techniques for environmental {sup 3}H, {sup 14}C and {sup 222}Rn with a liquid scintillation counter have been studied. {sup 3}H in environmental water was enriched by electrolysis and measured with a low background liquid scintillation counter. By this technique, {sup 3}H concentration of ground water, river water, sea water and rain water at Tokyo was founded to be 0.1 {approx} 2.5 Bq/1. {sup 14}C in taurine and ethyl-alcohol was measured directly liquid scintillation counter. By this {sup 14}C measuring, natural products, contain low level {sup 14}C, were distinguished from synthesised products contain no {sup 14}C. {sup 222}Rn in toluene extracted from environmental water or air was measured by scintillation pulse interval analysis method. By this technique, {sup 222}Rn was able to be measured under very low background counting rate, 0.03cpm, and high efficiency. (author).

  10. Single Crystal Piezomotor for Large Stroke, High Precision and Cryogenic Actuations, Phase I

    Data.gov (United States)

    National Aeronautics and Space Administration — TRS Technologies proposes a novel single crystal piezomotor for large stroke, high precision, and cryogenic actuations with capability of position set-hold with...

  11. Drift chambers for a large-area, high-precision muon spectrometer

    International Nuclear Information System (INIS)

    Alberini, C.; Bari, G.; Cara Romeo, G.; Cifarelli, L.; Del Papa, C.; Iacobucci, G.; Laurenti, G.; Maccarrone, G.; Massam, T.; Motta, F.; Nania, R.; Perotto, E.; Prisco, G.; Willutsky, M.; Basile, M.; Contin, A.; Palmonari, F.; Sartorelli, G.

    1987-01-01

    We have tested two prototypes of high-precision drift chamber for a magnetic muon spectrometer. Results of the tests are presented, with special emphasis on their efficiency and spatial resolution as a function of particle rate. (orig.)

  12. High-precision analogue peak detector for X-ray imaging applications

    OpenAIRE

    Dlugosz, Rafal Tomasz; Iniewski, Kris

    2007-01-01

    A new analogue high-precision peak detector is presented. Owing to its very low power consumption the circuit is particularly well suited for photon energy detection in multichannel receiver integrated circuits used in nuclear medicine.

  13. Mineralization of 14C-labeled agrochemicals in soil

    International Nuclear Information System (INIS)

    Xu Bujin; Huang Xiaohua; Hu Xiuqing; Zhang Yongxi

    2001-01-01

    14 C-labeled compounds were used to study the mineralization of methamidophos, 2,4-D and metsulfuron in soil. Mineralization rate was influenced by the type of soil, concentration of chemical in the soil, the initial soil microbial population and the nature of the chemical. (author)

  14. Method of preparing (U-14C)-D-galactose

    International Nuclear Information System (INIS)

    Zemek, J.; Kucar, S.; Kolina, J.

    1982-01-01

    Whole Chlorella algae cells cultivated in a 14 CO 2 medium were subjected to a β-galactosidase solution buffered to pH=4.5 to 6.0. The produced (U- 14 C)-D-galactose is separated by paper chromatography. (E.S.)

  15. Process for the production of 14C-labelled compounds

    International Nuclear Information System (INIS)

    Oldham, K.G.; Carr, N.G.

    1978-01-01

    The patent describes the production of 14 C-labelled compounds from solution with the aid of algae. A microorganism of the Anacystic species is used, preferably Anacystis nidulans which is also known as 'Indiana 625'. The experiments and their results are described in detail. (UWI) [de

  16. Acceleration of 14C beams in electrostatic accelerators

    International Nuclear Information System (INIS)

    Rowton, L.J.; Tesmer, J.R.

    1981-01-01

    Operational problems in the production and acceleration of 14 C beams for nuclear structure research in Los Alamos National Laboratory's Van de Graaff accelerators are discussed. Methods for the control of contamination in ion sources, accelerators and personnel are described. Sputter source target fabrication techniques and the relative beam production efficiencies of various types of bound particulate carbon sputter source targets are presented

  17. Plasma kinetics of 14C-uric acid in bulls

    International Nuclear Information System (INIS)

    Cetinkaya, N.

    1999-01-01

    Plasma kinetics of uric acid were followed by 14C labelled uric acid to measure the effects of feed intake upon kinetic parameters. Two bulls (average L W 346±79 kg) were given an intravenous administration of a tracer (8-14C-uric acid, 250μCi/50 ml) by single injection via a jugular catheter. Animals were fed a mixed diet containing 30% wheat straw and 70% compounded feed as 95 and 60 % of the voluntary intake. Voluntary intakes were 8 kg/d as fed for two bulls. Blood samples, were collected at 0, 0.5,1, 2, 3, 4, 6, 8, 12, 16, 24 and 28 h after tracer administration. Fractional rates of clearance from the blood and pool size of compartments in the blood were estimated using plasma 8-14C-counts, following the method proposed by Chen and Franklin. The mean values of fractional rates (K 2,1 , K 1,2 ) and compartments pool size (V 1 , V 2 ) and the total pool size of compartments I and 2 at 60% and 95% feeding level were 1.97 and 1.44, 1.06 and 0.78; 76.9 L and 94.5 L, 137.01 L and 163.51 L; 214.0 L and 250.3 L respectively. Plasma kinetic parameters of 14C-uric acid were not affected at different feed intakes

  18. Photosynthetic incorporation of 14C by Stevia rebaudiana

    International Nuclear Information System (INIS)

    Ferraresi, M. de L.; Ferraresi Filho, O.; Bracht, A.

    1985-01-01

    The photosynthetic incorporation of 14 by Stevia rebaudiana specimens was investigated. The 14 C incorporation, when the isotope was furnished to the plant in form of 14 CO 2 , was rapid. After 24 hours, the radioactivity has been incorporated into a great number of compounds including pigments, terpenes, glucose, cellulose and also stevioside and its derivatives. (M.A.C.) [pt

  19. Modified synthesis of 11-[{sup 14}C]-clozapine

    Energy Technology Data Exchange (ETDEWEB)

    Matloubi, Hojatollah E-mail: hmatloubi@seai.neda.net.ir; Ghandi, Mehdi; Zarrindast, M.-R.; Saemian, Nader

    2001-11-01

    The reported synthetic pathway of 8-chloro-11-(4-methyl-1-piperazinyl)-11-[{sup 14}C]-5H-dibenzo[b,e][1,4]diazapine (clozapine) was modified in several steps. The synthetic pathway was shortened by 60% and the total yield was increased from 6% to 23%.

  20. Modified synthesis of 11-[14C]-clozapine

    International Nuclear Information System (INIS)

    Matloubi, Hojatollah; Ghandi, Mehdi; Zarrindast, M.-R.; Saemian, Nader

    2001-01-01

    The reported synthetic pathway of 8-chloro-11-(4-methyl-1-piperazinyl)-11-[ 14 C]-5H-dibenzo[b,e][1,4]diazapine (clozapine) was modified in several steps. The synthetic pathway was shortened by 60% and the total yield was increased from 6% to 23%

  1. Physical Research Laboratory radiocarbon 14C dates : CS-I

    International Nuclear Information System (INIS)

    Agrawal, D.P.; Krishnamurthy, R.V.; Kusumgar, Sheela; Pant, R.K.

    1978-01-01

    The 14 C dates of archaeological samples measured at the Radiocarbon Laboratory of the Physical Research Laboratory, Ahmedabad are presented. Samples were converted into methane and measured in gas proportional counters. Ninety-five percent activity of NBS oxalic acid was used as modern standard. The dates in years B.P. are given for each sample based on the half-life values of 5568 +- 30 years and 5730 +- 40 years, the latter within parenthesis. The dates are not calibrated for 14 C/ 12 C variations. To convert the dates into AD/BC scale, 1950 AD should be used as reference year. A number of 14 C dates (PRL-81, -83, -67, -68) now confirm that the Painted Grey Ware culture extended upto the 3rd century BC. Some of the dates from Barkhera (PRL-113), Bateshwar (PRL-200), Bhimbetka (PRL-17) and Koldihawa (PRL-100, 101) are older than normally expected, probably indicative of some hitherto unknown basal cultures in these regions. 14 C dates on in situ Megalithic materials do not seem to go beyond 200 BC. (author)

  2. Biokinetic studies on 14C-chitosan in rats

    International Nuclear Information System (INIS)

    Jia Minghong; Nishimura, Y.; Watanabe, Y.; Yukawa, M.

    1998-05-01

    The absorption and the basic metabolism of chitosan in rats are investigated. The results indicated that 14 C-chitosan from gastrointestinal tract was absorbed, metabolized and excreted quickly without re-bioavailability. The radioactive compounds perhaps with specifically chemical forms in serum, liver and the contents of small intestines were separated on GPC column and measured by radioactivity counting. A big pile of peaks with the retention volume almost same as that of standard 14 C-chitosan and another sharp one with the retention volume in the range of higher molecular weight same as that of BSA were discovered in analysis respectively for contents of intestine and serum or liver. The sharp peak would disappear if the proteins contained in the serum or liver were removed. In addition, and interesting tail peak, followed with the pile ones and eluted with the retention volume of lower molecular weight range same as that of chitooligosaccharides was also found in each of the 3 samples, ignoring the protein removal or not. These results suggested that most of 14 C-chitosan was not to be digested in intestine. On the other hand, a small amount of 14 C-chitosan was likely to be absorbed directly or after degraded to small molecular compounds into blood, liver and other tissues, and then connected with the proteins. Perhaps it is these trace materials that were playing important roles in reduction of the bioavailability of radiostrontium in rats

  3. The synthesis of [14C] C I pigment violet 19

    International Nuclear Information System (INIS)

    Filer, C.N.; Kelly, T.P.

    1990-01-01

    For the custom synthesis of radiolabeled compounds in the authors laboratory, aside from spectroscopic examination, their identity and radiochemical purity is routinely corroborated by demonstration of cochromatography with an authentic cold standard. In the synthesis of [ 14 C] red pigment 1 for the Cosmetic Toiletry and Fragrance Association, its insolubility precluded this. The preparation as well as characterization of 1 is described

  4. Synthesis of glycerides and glycerophospholipides labelled with 14C

    International Nuclear Information System (INIS)

    Danan, J.-L.

    1977-01-01

    Glycerides and glycerophospholipides labelled with 14 C were chemically synthetized using isopropylidene-D-glycerol prepared from D mannitol. The acylation method by labelled fatty acid chlorides was utilized. An original synthesis method was developed for the phospholipides using cyclic enediol pyrophosphate [fr

  5. Residues of 14C-cyolane in cottonseed products

    International Nuclear Information System (INIS)

    Zayed, S.M.A.D.; Osman, A.Z.; Fakhr, I.M.I.; Bahig, M.E.

    1981-01-01

    The systemic insecticide cyolane [2-(0,0-diethylphosphoryl)-imino-1,3-dithiolane] was prepared from 14 C-ethanol, phosphorus oxychloride and 2-amino-1,3-dithiolane. Cotton plants were treated with two applications of the insecticide under conditions of local agricultural practice. 14 C-residues in the crude oil and cake of the harvested cotton seeds amounted to 1.63 and 0.014 mg/kg respectively. About 50% of the 14 C-activity present in the crude oil was found to be eliminated by simulated commercial processes used for refining of the oil. Alkali treatment and bleaching removed 16% and 25% of the radioactive residues respectively. Winterization of the bleached oil at 5-7 0 C for 3 days effected a further elimination of 13%. 14 C-residues in the cotton seed products and in the samples of the refined oil were characterized and the main constituents identified using chromatographic techniques. (author)

  6. A simulation of driven reconnection by a high precision MHD code

    International Nuclear Information System (INIS)

    Kusano, Kanya; Ouchi, Yasuo; Hayashi, Takaya; Horiuchi, Ritoku; Watanabe, Kunihiko; Sato, Tetsuya.

    1988-01-01

    A high precision MHD code, which has the fourth-order accuracy for both the spatial and time steps, is developed, and is applied to the simulation studies of two dimensional driven reconnection. It is confirm that the numerical dissipation of this new scheme is much less than that of two-step Lax-Wendroff scheme. The effect of the plasma compressibility on the reconnection dynamics is investigated by means of this high precision code. (author)

  7. Research on the high-precision non-contact optical detection technology for banknotes

    Science.gov (United States)

    Jin, Xiaofeng; Liang, Tiancai; Luo, Pengfeng; Sun, Jianfeng

    2015-09-01

    The technology of high-precision laser interferometry was introduced for optical measurement of the banknotes in this paper. Taking advantage of laser short wavelength and high sensitivity, information of adhesive tape and cavity about the banknotes could be checked efficiently. Compared with current measurement devices, including mechanical wheel measurement device, Infrared measurement device, ultrasonic measurement device, the laser interferometry measurement has higher precision and reliability. This will improve the ability of banknotes feature information in financial electronic equipment.

  8. Extraction of in situ cosmogenic 14C from olivine

    Science.gov (United States)

    Pigati, J.S.; Lifton, N.A.; Timothy, Jull A.J.; Quade, Jay

    2010-01-01

    Chemical pretreatment and extraction techniques have been developed previously to extract in situ cosmogenic radiocarbon (in situ 14C) from quartz and carbonate. These minerals can be found in most environments on Earth, but are usually absent from mafic terrains. To fill this gap, we conducted numerous experiments aimed at extracting in situ 14C from olivine ((Fe,Mg)2SiO4). We were able to extract a stable and reproducible in situ 14C component from olivine using stepped heating and a lithium metaborate (LiBO2) flux, following treatment with dilute HNO3 over a variety of experimental conditions. However, measured concentrations for samples from the Tabernacle Hill basalt flow (17.3 ?? 0.3 ka4) in central Utah and the McCarty's basalt flow (3.0 ?? 0.2 ka) in western New Mexico were significantly lower than expected based on exposure of olivine in our samples to cosmic rays at each site. The source of the discrepancy is not clear. We speculate that in situ 14C atoms may not have been released from Mg-rich crystal lattices (the olivine composition at both sites was ~Fo65Fa35). Alternatively, a portion of the 14C atoms released from the olivine grains may have become trapped in synthetic spinel-like minerals that were created in the olivine-flux mixture during the extraction process, or were simply retained in the mixture itself. Regardless, the magnitude of the discrepancy appears to be inversely proportional to the Fe/(Fe+Mg) ratio of the olivine separates. If we apply a simple correction factor based on the chemical composition of the separates, then corrected in situ 14C concentrations are similar to theoretical values at both sites. At this time, we do not know if this agreement is fortuitous or real. Future research should include measurement of in situ 14C concentrations in olivine from known-age basalt flows with different chemical compositions (i.e. more Fe-rich) to determine if this correction is robust for all olivine-bearing rocks. ?? 2010 by the Arizona

  9. High precision electron beam diagnostic system for high current long pulse beams

    International Nuclear Information System (INIS)

    Chen, Y J; Fessenden, T; Holmes, C; Nelson, S D; Selchow, N.

    1999-01-01

    As part of the effort to develop a multi-axis electron beam transport system using stripline kicker technology for DARHT II applications, it is necessary to precisely determine the position and extent of long high energy beams (6-40 MeV, 1-4 kA, 2 microseconds) for accurate position control. The kicker positioning system utilizes shot-to-shot adjustments for reduction of relatively slow (<20 MHz) motion of the beam centroid. The electron beams passing through the diagnostic systems have the potential for large halo effects that tend to corrupt measurements performed using capacitive pick-off probes. Likewise, transmission line traveling wave probes have problems with multi-bounce effects due to these longer pulse widths. Finally, the high energy densities experienced in these applications distort typical foil beam position measurements

  10. Method of high precision interval measurement in pulse laser ranging system

    Science.gov (United States)

    Wang, Zhen; Lv, Xin-yuan; Mao, Jin-jin; Liu, Wei; Yang, Dong

    2013-09-01

    Laser ranging is suitable for laser system, for it has the advantage of high measuring precision, fast measuring speed,no cooperative targets and strong resistance to electromagnetic interference,the measuremen of laser ranging is the key paremeters affecting the performance of the whole system.The precision of the pulsed laser ranging system was decided by the precision of the time interval measurement, the principle structure of laser ranging system was introduced, and a method of high precision time interval measurement in pulse laser ranging system was established in this paper.Based on the analysis of the factors which affected the precision of range measure,the pulse rising edges discriminator was adopted to produce timing mark for the start-stop time discrimination,and the TDC-GP2 high precision interval measurement system based on TMS320F2812 DSP was designed to improve the measurement precision.Experimental results indicate that the time interval measurement method in this paper can obtain higher range accuracy. Compared with the traditional time interval measurement system,the method simplifies the system design and reduce the influence of bad weather conditions,furthermore,it satisfies the requirements of low costs and miniaturization.

  11. GENERATION OF HIGH RESOLUTION AND HIGH PRECISION ORTHORECTIFIED ROAD IMAGERY FROM MOBILE MAPPING SYSTEM

    Directory of Open Access Journals (Sweden)

    M. Sakamoto

    2012-07-01

    Full Text Available In this paper, a novel technique to generate a high resolution and high precision Orthorectified Road Imagery (ORI by using spatial information acquired from a Mobile Mapping System (MMS is introduced. The MMS was equipped with multiple sensors such as GPS, IMU, odometer, 2-6 digital cameras and 2-4 laser scanners. In this study, a Triangulated Irregular Network (TIN based approach, similar to general aerial photogrammetry, was adopted to build a terrain model in order to generate ORI with high resolution and high geometric precision. Compared to aerial photogrammetry, there are several issues that are needed to be addressed. ORI is generated by merging multiple time sequence images of a short section. Hence, the influence of occlusion due to stationary objects, such as telephone poles, trees, footbridges, or moving objects, such as vehicles, pedestrians are very significant. Moreover, influences of light falloff at the edges of cameras, tone adjustment among images captured from different cameras or a round trip data acquisition of the same path, and time lag between image exposure and laser point acquisition also need to be addressed properly. The proposed method was applied to generate ORI with 1 cm resolution, from the actual MMS data sets. The ORI generated by the proposed technique was more clear, occlusion free and with higher resolution compared to the conventional orthorectified coloured point cloud imagery. Moreover, the visual interpretation of road features from the ORI was much easier. In addition, the experimental results also validated the effectiveness of proposed radiometric corrections. In occluded regions, the ORI was compensated by using other images captured from different angles. The validity of the image masking process, in the occluded regions, was also ascertained.

  12. Nuclear Structure Effects in the Exotic Decay of $^{225}$Ac via $^{14}$C Emission

    CERN Multimedia

    2002-01-01

    % IS323 \\\\ \\\\ We propose to build at Isolde a high intensity $^{225}$Ac source by $\\beta$-decay of $^{225}$(Ra+Fr) beam, to be used at the superconducting spectrometer SOLENO of IPN-Orsay in order to study a possible fine structure in the spectrum of $^{14}$C ions spontaneously emitted by $^{225}$Ac.

  13. Classification of LIDAR Data for Generating a High-Precision Roadway Map

    Science.gov (United States)

    Jeong, J.; Lee, I.

    2016-06-01

    Generating of a highly precise map grows up with development of autonomous driving vehicles. The highly precise map includes a precision of centimetres level unlike an existing commercial map with the precision of meters level. It is important to understand road environments and make a decision for autonomous driving since a robust localization is one of the critical challenges for the autonomous driving car. The one of source data is from a Lidar because it provides highly dense point cloud data with three dimensional position, intensities and ranges from the sensor to target. In this paper, we focus on how to segment point cloud data from a Lidar on a vehicle and classify objects on the road for the highly precise map. In particular, we propose the combination with a feature descriptor and a classification algorithm in machine learning. Objects can be distinguish by geometrical features based on a surface normal of each point. To achieve correct classification using limited point cloud data sets, a Support Vector Machine algorithm in machine learning are used. Final step is to evaluate accuracies of obtained results by comparing them to reference data The results show sufficient accuracy and it will be utilized to generate a highly precise road map.

  14. CLASSIFICATION OF LIDAR DATA FOR GENERATING A HIGH-PRECISION ROADWAY MAP

    Directory of Open Access Journals (Sweden)

    J. Jeong

    2016-06-01

    Full Text Available Generating of a highly precise map grows up with development of autonomous driving vehicles. The highly precise map includes a precision of centimetres level unlike an existing commercial map with the precision of meters level. It is important to understand road environments and make a decision for autonomous driving since a robust localization is one of the critical challenges for the autonomous driving car. The one of source data is from a Lidar because it provides highly dense point cloud data with three dimensional position, intensities and ranges from the sensor to target. In this paper, we focus on how to segment point cloud data from a Lidar on a vehicle and classify objects on the road for the highly precise map. In particular, we propose the combination with a feature descriptor and a classification algorithm in machine learning. Objects can be distinguish by geometrical features based on a surface normal of each point. To achieve correct classification using limited point cloud data sets, a Support Vector Machine algorithm in machine learning are used. Final step is to evaluate accuracies of obtained results by comparing them to reference data The results show sufficient accuracy and it will be utilized to generate a highly precise road map.

  15. A shell-derived time history of bomb 14C on Georges Bank and its Labrador Sea implications

    International Nuclear Information System (INIS)

    Weidman, C.R.; Jones, G.A.

    1993-01-01

    Bomb-produced radiocarbon has been used in the past as an important tracer of ocean circulation and as a valuable tool for calculating CO 2 air-sea exchange. However, previous studies of the ocean's time-varying bomb 14 C record have been confined exclusively to analyzing banded corals, and thus their application has been limited to the lower latitudes. The first time history of bomb 14 C from the high-latitude North Atlantic Ocean is obtained from a 54-year-old mollusc specimen, (Bivalvia) Arctica islandica, which was collected live from Georges Bank (41 degrees N) in 1990. The annual growth bands of its shell were analyzed for Δ 14 C using accelerator mass spectrometry, producing a Δ 14 C time history from 1939 to 1990. The depleted condition of the Georges Bank bomb 14 C signal relative to two coral-derived North Atlantic Δ 14 C time histories suggests a significant deepwater source for the waters on Georges Bank. Supported by previous work linking the origin of waters on Georges Bank to the Labrador Sea, the Δ 14 C budget on Georges Bank is modeled as Labrador Sea water, which largely becomes confined to the shelf and partially equilibrates with the atmosphere during a 1-year transit time from the Labrador Sea to Georges Bank. This model is also used to estimate a time history of bomb 14 C for the Labrador Sea. Prebomb Δ 14 C values calculated for the surface Labrador Sea suggest that a greater inventory of bomb 14 C has accumulated here than has previously been reported. Deduced variations in the ventilation and/or 14 CO 2 uptake rates in the Labrador Sea correspond with observed changes in surface salinity of the Labrador Sea, suggesting a reduction in deepwater formation during the late 1960s and 1970s. 59 refs., 11 figs., 2 tabs

  16. Synthesis of [methyl-{sup 14}C]crotonobetaine from DL-[methyl-{sup 14}C]carnitine

    Energy Technology Data Exchange (ETDEWEB)

    Loester, H.; Seim, H. [Leipzig Univ. (Germany). Inst. of Clinical Chemistry and Pathobiochemistry

    1996-02-01

    The causes of carnitine deficiency syndromes are not completely understood, but decomposition of L-carnitine in vivo is likely to be involved. Carnitine is metabolized to {gamma}-butyrobetaine, and crotonobetaine is probably an intermediate in this pathway. To validate experimentally the precursor-product relationship between the three physiologically occuring {gamma}-betaines - L-carnitine, crotonobetaine, {gamma}-butyrobetaine - labelling with stable or radioactive isotopes became necessary. Methyl-labelled carnitine isomers (L(-)-, D(+)- or DL-) or {gamma}-butyrobetaine can be easily synthesized by methylation of 4-amino-3-hydroxybutyric acid isomers or 4-aminobutyric acid, respectively. Because of problems with the 4-aminocrotonic acid, we synthesized labelled crotonbetaine from labelled carnitine. Thus, DL-[methyl-{sup 14}C]carnitine was dehydrated by reaction with concentrated sulfuric acid. After removal of the latter the products were separated and purified by ion exchange chromatography on DOWEX 50 WX8 (200 - 400 mesh) and gradient elution with hydrochloric acid. In addition to the labelled main product [methyl-{sup 14}C]crotonobetaine (yield about 50 %), [methyl-{sup 14}C]glycine betaine and [methyl-{sup 14}C]acetonyl-trimethylammonium (ATMA) were formed. The end products were identified by combined thin layer chromatography/autoradiography and quantified by liquid scintillation counting. (Author).

  17. Tracer experiment administering L-phenylalanine-U-{sup 14}C and L-tyrosine-U-{sup 14}C to the tissue slices of bamboo shoots

    Energy Technology Data Exchange (ETDEWEB)

    Kozukue, E. [Kenmei Women' s Junior Coll., Himeji, Hyogo (Japan); Mizuno, S.

    1987-09-15

    Uniformly {sup 14}C-labeled L-phenylalanine and L-tyrosine were administered to tissue slices of both top and base sections of bamboo shoots. Alcohol soluble substances were extracted and then separated into organic acid, sugar and amino acid fractions by ion exchange chromatography. The homogentisic acid fraction among the organic acids was collected by high-performance liquid chromatography (HPLC) and its radioactivity was measured, while the alcohol insoluble residue was used for the analysis of lignin aldehyde by the method of alkaline nitrobenzene oxidation. 1. The two labeled amino acids were steadily incorporated into the tissues during incubation and rapidly converted to organic acid, sugar and alcohol insoluble residue, especially the latter. 2. On determining the amount of phenylalanine converted to tyrosine, it was found that this was extremely small. 3. The incorporation of phenylalanine-U-{sup 14}C into alcohol insoluble residue was higher than that of tyrosine in both sections. 4. Although the conversion into lignin aldehyde from phenylalanine-U-{sup 14}C was higher than that from tyrosine-U-{sup 14}C, it was found that tyrosine incorporated into the shoots was converted to a remarkable extent for formation of lignin aldehyde. 5. The incorporation of phenylalanine and tyrosine into homogentisic acid was very low. From these results, we assume that the conversion of phenylalanine to tyrosine or of tyrosine to homogentisic acid is very small, and that a part of the high amount of tyrosine in the shoots may be used for formation of lignin.

  18. High-precision multiband spectroscopy of ultracold fermions in a nonseparable optical lattice

    Science.gov (United States)

    Fläschner, Nick; Tarnowski, Matthias; Rem, Benno S.; Vogel, Dominik; Sengstock, Klaus; Weitenberg, Christof

    2018-05-01

    Spectroscopic tools are fundamental for the understanding of complex quantum systems. Here, we demonstrate high-precision multiband spectroscopy in a graphenelike lattice using ultracold fermionic atoms. From the measured band structure, we characterize the underlying lattice potential with a relative error of 1.2 ×10-3 . Such a precise characterization of complex lattice potentials is an important step towards precision measurements of quantum many-body systems. Furthermore, we explain the excitation strengths into different bands with a model and experimentally study their dependency on the symmetry of the perturbation operator. This insight suggests the excitation strengths as a suitable observable for interaction effects on the eigenstates.

  19. Reference satellite selection method for GNSS high-precision relative positioning

    Directory of Open Access Journals (Sweden)

    Xiao Gao

    2017-03-01

    Full Text Available Selecting the optimal reference satellite is an important component of high-precision relative positioning because the reference satellite directly influences the strength of the normal equation. The reference satellite selection methods based on elevation and positional dilution of precision (PDOP value were compared. Results show that all the above methods cannot select the optimal reference satellite. We introduce condition number of the design matrix in the reference satellite selection method to improve structure of the normal equation, because condition number can indicate the ill condition of the normal equation. The experimental results show that the new method can improve positioning accuracy and reliability in precise relative positioning.

  20. High-precision high-sensitivity clock recovery circuit for a mobile payment application

    International Nuclear Information System (INIS)

    Sun Lichong; Yan Na; Min Hao; Ren Wenliang

    2011-01-01

    This paper presents a fully integrated carrier clock recovery circuit for a mobile payment application. The architecture is based on a sampling-detection module and a charge pump phase locked loop. Compared with clock recovery in conventional 13.56 MHz transponders, this circuit can recover a high-precision consecutive carrier clock from the on/off keying (OOK) signal sent by interrogators. Fabricated by a SMIC 0.18-μm EEPROM CMOS process, this chip works from a single power supply as low as 1.5 V Measurement results show that this circuit provides 0.34% frequency deviation and 8 mV sensitivity. (semiconductor integrated circuits)

  1. Model experiments for {sup 14}C water-age determinations

    Energy Technology Data Exchange (ETDEWEB)

    Wendt, I; Stahl, W; Geyh, M; Fauth, F [Bundesanstalt fuer Bodenforschung, Hannover (Germany)

    1967-05-15

    The {sup 14}C age of water samples is calculated by assuming that fossil carbonate is dissolved by biogenic CO{sub 2} according to the equation x{sub 1} {center_dot} CaCO{sub 3} + (x{sub 1}+y{sub 1}) {center_dot} CO{sub 2} + H{sub 2}O = 2x{sub 1} {center_dot} HCO{sub 3} + y{sub 1} {center_dot} CO{sub 2} where x and y are the number of moles of the two carbon components before and after the dissolution process. In a closed system the relation y{sub 1} = K(T) (x{sub 1}){sup 3} must be satisfied additionally. The equilibrium constant K(T), which depends on the temperature, controls the concentrations of free CO{sub 2} and HCO{sub 3}. To investigate the mechanism of the dissolution, laboratory experiments under controlled conditions were carried out. Non-radioactive CaCO{sub 3}, which had a {delta}{sup 13}C-value of +30 per mille, and radioactive CO{sub 2} with {delta}{sup 13}C = -22 per mille were used. The purpose of these investigations was to check the validity of theoretical assumptions regarding the average {sup 14}C-activity and the {delta}{sup 13}C-value of the total carbon which is dissolved as CO{sub 2} and HCO{sub 3}. Furthermore, it was investigated whether, within the duration of the experiment, a possible exchange takes place between the undissolved carbon present in the CaCO{sub 3} and that present in the HCO{sub 3}. The importance of this lies in the fact that the method of {sup 14}C age determination is based on the assumption that such an exchange does not take place. The experiments which have been performed up to now show that in case of the simple CaCO{sub 3} - CO{sub 2} system, which has been considered first, this assumption is not justified even for a constant water temperature. If variations in the water temperature occur during the history of the water sample, precipitation and redissolution processes influence the {sup 14}C- and {delta}{sup 13}C -values differently. This is due to isotopic fractionation processes between the HCO{sub 3} and CO

  2. Precision ring rolling technique and application in high-performance bearing manufacturing

    Directory of Open Access Journals (Sweden)

    Hua Lin

    2015-01-01

    Full Text Available High-performance bearing has significant application in many important industry fields, like automobile, precision machine tool, wind power, etc. Precision ring rolling is an advanced rotary forming technique to manufacture high-performance seamless bearing ring thus can improve the working life of bearing. In this paper, three kinds of precision ring rolling techniques adapt to different dimensional ranges of bearings are introduced, which are cold ring rolling for small-scale bearing, hot radial ring rolling for medium-scale bearing and hot radial-axial ring rolling for large-scale bearing. The forming principles, technological features and forming equipments for three kinds of precision ring rolling techniques are summarized, the technological development and industrial application in China are introduced, and the main technological development trend is described.

  3. MRPC-PET: A new technique for high precision time and position measurements

    International Nuclear Information System (INIS)

    Doroud, K.; Hatzifotiadou, D.; Li, S.; Williams, M.C.S.; Zichichi, A.; Zuyeuski, R.

    2011-01-01

    The purpose of this paper is to consider a new technology for medical diagnosis: the MRPC-PET. This technology allows excellent time resolution together with 2-D position information thus providing a fundamental step in this field. The principle of this method is based on the Multigap Resistive Plate Chamber (MRPC) capable of high precision time measurements. We have previously found that the route to precise timing is differential readout (this requires matching anode and cathode strips); thus crossed strip readout schemes traditionally used for 2-D readout cannot be exploited. In this paper we consider the time difference from the two ends of the strip to provide a high precision measurement along the strip; the average time gives precise timing. The MRPC-PET thus provides a basic step in the field of medical technology: excellent time resolution together with 2-D position measurement.

  4. High-Precision Half-Life Measurement for the Superallowed β+ Emitter Alm26

    Science.gov (United States)

    Finlay, P.; Ettenauer, S.; Ball, G. C.; Leslie, J. R.; Svensson, C. E.; Andreoiu, C.; Austin, R. A. E.; Bandyopadhyay, D.; Cross, D. S.; Demand, G.; Djongolov, M.; Garrett, P. E.; Green, K. L.; Grinyer, G. F.; Hackman, G.; Leach, K. G.; Pearson, C. J.; Phillips, A. A.; Sumithrarachchi, C. S.; Triambak, S.; Williams, S. J.

    2011-01-01

    A high-precision half-life measurement for the superallowed β+ emitter Alm26 was performed at the TRIUMF-ISAC radioactive ion beam facility yielding T1/2=6346.54±0.46stat±0.60systms, consistent with, but 2.5 times more precise than, the previous world average. The Alm26 half-life and ft value, 3037.53(61) s, are now the most precisely determined for any superallowed β decay. Combined with recent theoretical corrections for isospin-symmetry-breaking and radiative effects, the corrected Ft value for Alm26, 3073.0(12) s, sets a new benchmark for the high-precision superallowed Fermi β-decay studies used to test the conserved vector current hypothesis and determine the Vud element of the Cabibbo-Kobayashi-Maskawa quark mixing matrix.

  5. Effect of the essential amino acids upon inclusion in vitro of 14C-phenylalanine and 14C-leucine in the protein of mammary gland

    International Nuclear Information System (INIS)

    Alexandrov, S.; Ivanov, N.; Sirakov, L.

    1983-01-01

    It is admitted that the essential amino acids could be divided into two groups, depending on the need of them for synthesis of milk protein: group i - amino acids, which are absorbed in quantities precisely corresponding to their content in milk protein (methionine, phenyl-alanine, histidine, thyrosine and triptophane), and group ii - amino acids, which are absorbed in quantities greater than their content in milk protein and which, because of this, could fullfil other metabolic functions in the mammary gland (threonine, valine, isoleucine, lysine and arginine). According to this concept, tissue slices of lactating mammary gland of guinea-pigs were incubated in the presence of grour i or group ii essential amino acids. Slices were incubated for 60 min at 37+-0.5 deg C, In a Crebs-Ringer phosphate buffer plus 0.2 glucose and 3.7 KBq/ml incubation medium DL-(I- 14 C)-phenylalanine or L-(U- 14 C)-leucine and their incorporation in the tissue proteins of mammary gland was measured in vitro. Group ii essential amino acids provoked significantly more intensive (P<0.001) inclusion in protein synthesis of these labelled amino acids in the tissue of mammary gland, as compared with group i essential amino acids

  6. High Precision Fast Projective Synchronization for Chaotic Systems with Unknown Parameters

    Science.gov (United States)

    Nian, Fuzhong; Wang, Xingyuan; Lin, Da; Niu, Yujun

    2013-08-01

    A high precision fast projective synchronization method for chaotic systems with unknown parameters was proposed by introducing optimal matrix. Numerical simulations indicate that the precision be improved about three orders compared with other common methods under the same condition of software and hardware. Moreover, when average error is less than 10-3, the synchronization speed is 6500 times than common methods, the iteration needs only 4 times. The unknown parameters also were identified rapidly. The theoretical analysis and proof also were given.

  7. High precision analysis of trace lithium isotope by thermal ionization mass spectrometry

    International Nuclear Information System (INIS)

    Tang Lei; Liu Xuemei; Long Kaiming; Liu Zhao; Yang Tianli

    2010-01-01

    High precision analysis method of ng lithium by thermal ionization mass spectrometry is developed. By double-filament measurement,phosphine acid ion enhancer and sample pre-baking technique,the precision of trace lithium analysis is improved. For 100 ng lithium isotope standard sample, relative standard deviation is better than 0.086%; for 10 ng lithium isotope standard sample, relative standard deviation is better than 0.90%. (authors)

  8. The πNN coupling from high precision np charge exchange at 162 MeV

    International Nuclear Information System (INIS)

    Nilsson, J.; Blomgren, J.; Conde, H.; Elmgren, K.; Olsson, N.; Ericson, T.E.O.; Uppsala Univ.; Jonsson, O.; Nilsson, L.; Loiseau, B.; Ringbom, A.

    1995-02-01

    Differential cross sections for unpolarized neutrons of 162 MeV have been measured to high precision with particular attention to the absolute normalisation. These data can be extrapolated precisely and model-independently to the pion pole and give a πNN coupling constant g 2 =14.6±0.3 or f 2 =0.0808±0.0017. This is higher than recently suggested values. (author) 24 refs.; 3 figs.; 1 tab

  9. Research on Ship Trajectory Tracking with High Precision Based on LOS

    Directory of Open Access Journals (Sweden)

    Hengzhi Liu

    2018-01-01

    Full Text Available Aiming at how precise to track by LOS, a method is proposed. The method combines the advantages of LOS simplicity and intuition, easy parameter setting and good convergence, with the features of GPC softening, multi-step prediction, rolling optimization and excellent controllability and robustness. In order to verify the effectiveness of the method, the method is simulated by Matlab. The simulation’s results show that it makes ship tracking highly precise.

  10. Machine vision for high-precision volume measurement applied to levitated containerless material processing

    International Nuclear Information System (INIS)

    Bradshaw, R.C.; Schmidt, D.P.; Rogers, J.R.; Kelton, K.F.; Hyers, R.W.

    2005-01-01

    By combining the best practices in optical dilatometry with numerical methods, a high-speed and high-precision technique has been developed to measure the volume of levitated, containerlessly processed samples with subpixel resolution. Containerless processing provides the ability to study highly reactive materials without the possibility of contamination affecting thermophysical properties. Levitation is a common technique used to isolate a sample as it is being processed. Noncontact optical measurement of thermophysical properties is very important as traditional measuring methods cannot be used. Modern, digitally recorded images require advanced numerical routines to recover the subpixel locations of sample edges and, in turn, produce high-precision measurements

  11. A rapid microassay for detecting antibodies against poliovirus based on [14C]thymidine uptake of treated cell cultures

    International Nuclear Information System (INIS)

    Hilfenhaus, J.; Damm, H.; Ziegelmaier, R.; Gruschkau, H.

    1977-01-01

    DNA synthesis of mammalian cells propagated in microplates can easily be measured if cell cultures incubated with [ 14 C]thymidine are harvested on to glass fibre filters by a semiautomatic harvesting technique. Soon after infection with poliovirus, [ 14 C]thymidine uptake of U cells (established, human amniotic cell line) is inhibited. This inhibition can be prevented by previous virus neutralization with antibody. Based on this effect a rapid, precise assay method was set up to determine neutralizing antibody titres against poliovirus. There was a good correlation between titres obtained by this assay and those obtained by 50% endpoint titrations in cytopathogenic effect inhibition assays

  12. Measurements of natural levels of 14C in human's and rat's tissues by accelerator mass spectrometry in Korea

    International Nuclear Information System (INIS)

    Cho, S.Y.; Khu, H.J.; Kang, J.H.; Yoon, M.Y.; Kim, J.C.

    2005-01-01

    Accelerator mass spectrometry (AMS) is the most sensitive, safe and precise analytical method for quantifying long-lived isotope in biomedical research with animals as well as human beings. In Korea, AMS Laboratory has been operating successfully for years measuring especially archaeological samples for 14 C dating. In this year, a biological sample pretreatment facility was setup to work on biomedical applications. As a preliminary study, we have measured the natural background levels of 14 C in tissues and blood of humans and rats have been measured. The results were agreed with the other reported levels and gave stable and reproducible results within 1-2%. (author)

  13. Reactions of saccharides catalyzed by molybdate ions. XXXIII. Use of. cap alpha. (U-/sup 14/C)glucan for preparation of /sup 14/C-labelled saccharides

    Energy Technology Data Exchange (ETDEWEB)

    Bilik, V; Biely, P [Institute of Chemistry, Centre for Chemical Research, Slovak Academy of Sciences, Bratislava (Czechoslovakia); Kolina, J [Ustav pro Vyzkum, Vyrobu a Vyuziti Radioisotopu, Prague (Czechoslovakia)

    1984-01-01

    D-(U-/sup 14/C)glucose obtained in acid hydrolysis of ..cap alpha..-(U-/sup 14/C)glucan (2 M-HCl) was epimerized under a catalytic action of molybdate ions to D-(U-/sup 14/C)mannose isolated with a 20% yield. Oxidative degradation of 4-nitrophenylhydrazones of D-(U-/sup 14/C)arabinose and D-(U-/sup 14/C)xylose resulted in D-(U-/sup 14/C)erythrose and D-(U-/sup 14/C)threose, respectively, with a 15% yield relative to the starting aldopentoses. Nitromethane synthesis with D-(U-/sup 14/C)lyxose followed by oxidative decomposition of the corresponding nitrohexitols yielded /sup 14/C-labelled D-galactose. Described is also the preparation of D-(U-/sup 14/C)arabinose from D-(U-/sup 14/C)glucose and the conversion of D-(U-/sup 14/C)arabinose to D-(U-/sup 14/C)xylose and D-(U-/sup 14/C)lyxose.

  14. Seasonal changes in within-canopy allocation of 14C-photosynthate by white oak

    International Nuclear Information System (INIS)

    McLaughlin, S.B.; McConathy, R.K.; Beste, B.

    1979-01-01

    Seasonal changes in photosynthate translocation and allocation of two mature, codominant white oak trees were studied by following rates of movement of 14 C-photosynthate from foliage labeled with 14 CO 2 . Loss rates were determined by sampling foliage at 5 min and 1, 4, and 7 days after labeling on each of five dates (April 22 to October 4). Incorporation of 14 C-photosynthate into 1-, 3-, and 5-year-old branches was determined 7 days after tagging. Losses of 14 C from leaves were rapid by day 1 (less than or equal to 80 percent), greatly reduced by day 4, and ranged fom 63 to 91 percent by day 7. Maximum retention of initial activity levels occurred in April for leaves (44 percent) and in October for branches (15 percent). Approximately equal apportionment of activity between leaves and branches did not occur until August. Highest total retention of photosynthate in the canopy occurred in April (due to high incorporation in leaves) and June (due to high retention in both leaves and branches). Based on measured retention and estimated respiration losses, translocation of the original 14 C-photosynthate from the canopy was calculated to be approximately 0 percent in April, 30 percent in June, and 60 percent in October. These results indicate that canopy growth and maintenance impose a significant drain on availability of photosynthate throughout the growing season

  15. Design and algorithm research of high precision airborne infrared touch screen

    Science.gov (United States)

    Zhang, Xiao-Bing; Wang, Shuang-Jie; Fu, Yan; Chen, Zhao-Quan

    2016-10-01

    There are shortcomings of low precision, touch shaking, and sharp decrease of touch precision when emitting and receiving tubes are failure in the infrared touch screen. A high precision positioning algorithm based on extended axis is proposed to solve these problems. First, the unimpeded state of the beam between emitting and receiving tubes is recorded as 0, while the impeded state is recorded as 1. Then, the method of oblique scan is used, in which the light of one emitting tube is used for five receiving tubes. The impeded information of all emitting and receiving tubes is collected as matrix. Finally, according to the method of arithmetic average, the position of the touch object is calculated. The extended axis positioning algorithm is characteristic of high precision in case of failure of individual infrared tube and affects slightly the precision. The experimental result shows that the 90% display area of the touch error is less than 0.25D, where D is the distance between adjacent emitting tubes. The conclusion is gained that the algorithm based on extended axis has advantages of high precision, little impact when individual infrared tube is failure, and using easily.

  16. Ground water dating on the basis of the 14C content of dissolved humic and fulvic acids. Final report

    International Nuclear Information System (INIS)

    Kim, J.I.; Artinger, R.; Buckau, G.; Kardinal, C.; Geyer, S.; Wolf, M.; Halder, H.; Fritz, P.

    1995-05-01

    The groundwater dating on the basis of the 14 C content of dissolved organic carbon (DOC) is studied. Fulvic acids (FA) and humic acids (HA) are used as DOC fractions. In addition, the groundwaters are dated with the 14 C content of the dissolved inorganic carbon (DIC). The isotopic contents of 2 H, 3 H, 13 C, 15 N, 18 O, and 34 S of groundwater and humic substances are alse determined. The isolated humic substances are characterized with regard to their chemical composition as well as their molecular size and spectroscopic properties. For aquifer systems which have a neglectable content of sedimentary organic carbon (SOC), the 14 C dating of FA show plausible groundwater ages. In aquifer systems with a high SOC content, the mixing of 14 C free FA from sediment partly falsifies the 14 C groundwater age as determined by dissolved FA. Due to the high transfer of HA from sediment to groundwater, HA are less suitable for groundwater dating. The FA characterization allows the distinction between FA of sedimentary origin and FA which infiltrate with seepage water. Several starting points for a correction of the calculated 14 C ages of FA exist. The results indicate, 14 C groundwater dating with fulvic acids is a valuable expansion of groundwater dating methods. (orig.) [de

  17. The synthesis of nucleoside bases with 14 C

    International Nuclear Information System (INIS)

    Matloubi, H.; Mehrdad, M.

    1997-01-01

    Labelled organic compounds have been widely and diligently applied to research problems in life science and chemistry. In many laboratories they have lost their novelty and have been become conventional research tools since long time ago. these applications frequently require organic compounds substituted (or labelled) with isotopes, but the isotopes are (with certain exception) extracted in first place in simple inorganic forms. The conversion of these simple form into the more or less complex labelled compounds called for by research workers has become in effect a new branch of practical organic chemistry. The preparation of labelled compounds, carbon-14 is probably more extensively and variously used than any other isotope. It emits only beta-particles. In this project, two kinds of nucleoside bases under the name uracil-2- 14 C and thymine (methyl- 14 C) were prepared.(author). 14 refs., 3 figs., 2 tabs

  18. 10Be and 14C in the Earth system

    International Nuclear Information System (INIS)

    Oeschger, H.; Beer, J.; Andree, M.

    1987-01-01

    In a very short period of time, 10 Be data have significantly improved our knowledge in various fields of Earth and planetary sciences. Examples are solar modulation of isotope production, revealed in 10 Be ice-core profiles; geomagnetic modulation of isotope production, revealed in 10 Be ice-core (from the past 10 ka) and ocean-sediment profiles (geomagnetic reversals); climatic effects reflected in 10 Be profiles in loess and polar ice cores ( 10 Be behaviour in atmosphere); comparison of 10 Be and 14 C variations (tree rings) from carbon-cycle models and information on ocean circulation history from 14 C measurements on benthic and planktonic Foraminifera in ocean sediments. An overview on work in collaboration with the Zurich AMS (accelerator mass spectroscopy) facility is given. (author)

  19. New proportional counter assembly in Gliwice 14C laboratory

    International Nuclear Information System (INIS)

    Moscicki, W.; Zastawny, A.

    1977-01-01

    The design and parameters are described of a proportional counter for low level counting. The cathode tube 80 mm in diameter and 30 cm in length is made of pure copper. The anode is a tungsten wire 0.05 mm in diameter. The cathode tube is surrounded by a cylindrical ring container with mercury. The total volume of the counter is 1.5 l and it is filled with carbon dioxide. At a pressure of 1 at of CO 2 the counter background is 4.20+-0.05 cpm and contemporary 14 C net effect 10.22+-0.10 cpm; at a pressure of 2 at of CO 2 the background is 4.40+-0.05 cpm and the contemporary 14 C net effect 20.53+-10 cpm. The efficiency of the proportional counter is 88% in both cases. (J.B.)

  20. Progress in automated extraction and purification of in situ {sup 14}C from quartz: Results from the Purdue in situ {sup 14}C laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Lifton, Nathaniel, E-mail: nlifton@purdue.edu [Department of Earth, Atmospheric, and Planetary Sciences, Purdue University, 550 Stadium Mall Drive, West Lafayette, IN 47907 (United States); Department of Physics and Astronomy and Purdue Rare Isotope Measurement Laboratory (PRIME Lab), Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907 (United States); Goehring, Brent, E-mail: bgoehrin@tulane.edu [Department of Earth, Atmospheric, and Planetary Sciences, Purdue University, 550 Stadium Mall Drive, West Lafayette, IN 47907 (United States); Wilson, Jim, E-mail: jim.wilson@aeonlaboratories.com [Aeon Laboratories, LLC, 5835 North Genematas Drive, Tucson, AZ 85704 (United States); Kubley, Thomas [Department of Physics and Astronomy and Purdue Rare Isotope Measurement Laboratory (PRIME Lab), Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907 (United States); Caffee, Marc [Department of Earth, Atmospheric, and Planetary Sciences, Purdue University, 550 Stadium Mall Drive, West Lafayette, IN 47907 (United States); Department of Physics and Astronomy and Purdue Rare Isotope Measurement Laboratory (PRIME Lab), Purdue University, 525 Northwestern Avenue, West Lafayette, IN 47907 (United States)

    2015-10-15

    Current extraction methods for in situ {sup 14}C from quartz [e.g., Lifton et al., (2001), Pigati et al., (2010), Hippe et al., (2013)] are time-consuming and repetitive, making them an attractive target for automation. We report on the status of in situ {sup 14}C extraction and purification systems originally automated at the University of Arizona that have now been reconstructed and upgraded at the Purdue Rare Isotope Measurement Laboratory (PRIME Lab). The Purdue in situ {sup 14}C laboratory builds on the flow-through extraction system design of Pigati et al. (2010), automating most of the procedure by retrofitting existing valves with external servo-controlled actuators, regulating the pressure of research purity O{sub 2} inside the furnace tube via a PID-based pressure controller in concert with an inlet mass flow controller, and installing an automated liquid N{sub 2} distribution system, all driven by LabView® software. A separate system for cryogenic CO{sub 2} purification, dilution, and splitting is also fully automated, ensuring a highly repeatable process regardless of the operator. We present results from procedural blanks and an intercomparison material (CRONUS-A), as well as results of experiments to increase the amount of material used in extraction, from the standard 5 g to 10 g or above. Results thus far are quite promising with procedural blanks comparable to previous work and significant improvements in reproducibility for CRONUS-A measurements. The latter analyses also demonstrate the feasibility of quantitative extraction of in situ {sup 14}C from sample masses up to 10 g. Our lab is now analyzing unknowns routinely, but lowering overall blank levels is the focus of ongoing research.

  1. Spectrophotometric determination of sugars labelled with 14C

    International Nuclear Information System (INIS)

    Vatsikova, A.; Kralikova, M.; Vyskochilova, Z.

    1982-01-01

    Comparative analysis of methods for determination of microgram amounts of 14 C-labelled sugars has been carried out. The ferricyanide and Shomodyi-Nelson methods were approbated in experimental study. The relative error of the ferricyanide method was found to be smaller than that of the Shomodyi-Nelson method. Thus the ferricyanide method was used for obtaining calibration curves for 15 sugars. The accuracy for sugar amounts higher than 3 μg/10 ml was better than +, - 5% [ru

  2. Degradation of 14C-glyphosate in compost amended soils.

    Science.gov (United States)

    Alexa, E; Bragea, M; Sumalan, R; Negrea, M; Lazureanu, A

    2009-01-01

    Glyphosate (N-phosphonomethyl-glycine), the active ingredient in several herbicide formulations, is a non-selective, post-emergent herbicide used in a variety of crop and non-crop situations. Glyphosate is a non-volatile herbicide that is relatively immobile in soil. Its degradation is due to microbiological processes and most laboratory studies have been conducted with 14C-glyphosate with the rate of 14CO2 evolution being used as an indication of herbicide breakdown. In this paper we have studied the glyphosate degradation in compost amendment soils using Scientilator Liquid TRIATHLER and Glyphosate-phosphonomethyl-14C-labeled with specific activity 2,2mCi/mmol. Four types of soils have been taken under study: Black Chernozem, Vertisol, Gleysol and Phaeozem with different characteristics. For the each type of soil have been realized four experimental variants (glyphosate blind sample with 1,5 ppm, concentration, autoclaved soil, soil with glyphosate and addition of compost in field concentration of 40 t/ha, respectively 60 t/ha. The mineralization curves of 14CO2 accumulated were compared during of 40 days. All the mineralization curves for the soils exhibited same patterns, with only two phases, the initial rapid phase of degradation, for about 20 days, attributed to microbial action on the free glyphosate and the second slow phase, when the curves attained plateaus. Compost applied with different concentrations to Vertisol and Black Chernozem did not appear to stimulate the microbial degradation of glyphosate. In Gleysol and Phaeozem with lower humus content, the mineralization curve of 14C indicate the increase degradation capacity, expressed as accumulated 14CO2 as % total 14C, with the increase of compost concentration.

  3. The study of variations and environmental applications 14C

    International Nuclear Information System (INIS)

    Simon, J.

    2010-01-01

    The primary aim of the presented thesis is to explain experimentally observed 14 C variations in the outer atmosphere. Physical models have been developed to quantify directly immeasurable phenomena relevant in the field of radiocarbon dynamics. Namely atmospheric stability, 14 C transport from the stratosphere to the lower troposphere and fossil carbon dioxide emissions to the atmosphere. Finally these models have been used as the pillars of the united theory of Δ 14 C dynamics. Besides the presented main theoretical outputs, this thesis also provides couple of potentially implementable by-products. First of them is a method to evaluate so called 'equivalent mixing height' and turbulent diffusion coefficient using temporal changes of 222 Rn concentration in the boundary layer of the atmosphere. The elaborated mathematical apparatus for the evaluation of aerosol scavenging by raindrops can be utilized in the models of pollutant dispersion. Information on turbulent diffusion coefficient at higher atmospheric levels is important for the models of stratospheric and ozonospheric dynamics. Nowadays, when one can measure and even feel the greenhouse effect consequences, the importance of an independent method for carbon dioxide fossil emissions assessment is obvious. Besides theoretical outcome, the thesis also presents experimental results. A network of CO 2 sampling sites has been established in Bratislava and the outskirts in the vicinity of the town. Together with mountain site Chopok the network brought a unique information on 14 C distribution. Atmospheric measurements of 7 Be and 222 Rn activity are also presented here. Finally the PC codes have been developed to bridge a gap between experimental and theoretical results. (author)

  4. Pediatric microdose and microtracer studies using 14C in Europe.

    Science.gov (United States)

    Turner, M A; Mooij, M G; Vaes, W H J; Windhorst, A D; Hendrikse, N H; Knibbe, C A J; Kõrgvee, L T; Maruszak, W; Grynkiewicz, G; Garner, R C; Tibboel, D; Park, B K; de Wildt, S N

    2015-09-01

    Important information gaps remain on the efficacy and safety of drugs in children. Pediatric drug development encounters several ethical, practical, and scientific challenges. One barrier to the evaluation of medicines for children is a lack of innovative methodologies that have been adapted to the needs of children. This article presents our successful experience of pediatric microdose and microtracer studies using (14) C-labeled probes in Europe to illustrate the strengths and limitations of these approaches. © 2015 ASCPT.

  5. Biodegradation of 14 C-atrazine under outdoor conditions

    International Nuclear Information System (INIS)

    Queiroz, Brigida Pimentel Villar de

    1997-10-01

    Uniformly 14 C-ring labeled atrazine (5 L/ha) was applied to a Typical Hapludox Brazilian Soil sample which was incubated under outdoor conditions. Sample of 200 g (dry weight base) of fresh soil were distributed in Erlenmeyer flasks and the moisture was adjusted for 2/3 rds of the soil field capacity. The flasks were then buried in the Lysimeter Station when they were incubated. The experiment started jointly with a corn planting. The 14 C O 2 was analyzed every 15 day, during a period of 150 days. The desorbed, extracted and bound residues were analyzed. The extracted soil was fractionated and the residues in the humin, fulvic and humic acids were determined. At the end of the incubation period (150 days), the 14 CO 2 evolved reached up to 36% of the total applied activity, the bound residues were detected in about the same (34%) during the inoculation period, and were distributed in the fractions of fulvic acids (29,91%), humic acids (6,83%) and humin (63,26%). The metabolites formed in the desorbed residues and in the extracted residues were determined using thin layer chromatography with 14 C-detector. After 150 days incubation, desorbed soil residues were identified as atrazine (52,72%), hydroxiatrazine (44%) and desisopropilatrazine (3,28%). The extractable residues contained atrazine (79,29%), hydroxiatrazine (16,22%), desisopropilatrazine (2,25%) and desetylatrazine (2,24%). (author)

  6. Synthesis of 14C-labelled α-methyl tyrosine

    International Nuclear Information System (INIS)

    Rajagopal, S.; Venkatachalam, T.K.; Conway, T.; Diksic, M.

    1992-01-01

    A new route for the preparation of radioactively labelled α-methyl L-tyrosine is described. The labelling at the α position has been successfully achieved with 14 C-, 11 C- (very preliminary, unpublished), and 3 H-labelled methyl iodide. A detailed report on 14 C-labelling at the α position and the hydrolysis of 4-methoxy α-methyl phenylalanine is presented. The alkylation proceeds via the methylation of the carbanion of N-benzylidene 4-methoxy phenylalanine methyl ester 2. Hydrolysis of 4-O methyl tyrosine to tyrosine by HBr and HI were analysed and used in the optimization of the hydrolysis conditions of 4. Enantiomeric purity of the isolated L-isomer has been found to be 99% as judged by HPLC. Pseudo first-order rate constant for the hydrolysis of 14 C-labelled α-methyl 4-methoxy phenyl alanine methyl ester was determined. Preliminary findings of the 3 H- and 11 C-radiolabelled α-methyl tyrosine (methyl labelled) are also mentioned. For the first time it was shown that α-methyl D,L-tyrosine can be separated into enantiomerically pure α-methyl D- and L-tyrosine using a CHIRALPAK WH column. (author)

  7. Distribution of root exudates and mucilage in the rhizosphere: combining 14C imaging with neutron radiography

    Science.gov (United States)

    Holz, Maire; Carminati, Andrea; Kuzyakov, Yakov

    2015-04-01

    exudates. We found that mucilage and 14C concentrations were higher around the young root segments. Mucilage concentration was particularly high in the most apical 3-5 cm of the roots. Drought stress increased 14C exudation relative to C fixation and led to higher mucilage concentrations around roots. However, it remains unclear, whether the lower mucilage concentration around roots grown at higher soil moisture was caused by the faster diffusion of mucilage in wet soils. Therefore, a second experiment was focused on diffusion of mucilage in soil at varying water contents. The diffusion of mucilage in soil was not very sensitive to soil water content. We conclude that mucilage release was higher for plants exposed to drought stress. In summary, the combination of neutron radiography and 14C imaging can successfully be used to visualize and to quantify the distribution of mucilage and root exudates in the rhizosphere of plants grown in soil. References Kroener, E., Zarebanadkouki, M., Kaestner, A., & Carmintati, A. (2014). Nonequilibrium water dynamics in the rhizosphere: How mucilage affects water flow in soils. Water Resources Research, 37. Pausch, J., & Kuzyakov, Y. (2011). Photoassimilate allocation and dynamics of hotspots in roots visualized by 14C phosphor imaging. Journal of Plant Nutrition and Soil Science, 174(1), 12-19.

  8. Synthesis of disodium [benzene-U-{sup 14}C]-(4-chlorophenylthio)methylenediphosphonate, [benzene-U-{sup 14}C]-tiludronate

    Energy Technology Data Exchange (ETDEWEB)

    Burgos, Alain; Ellames, G.J. [Alnwick Research Centre (United Kingdom). Dept. of Metabolism and Pharmacokinetics

    1995-12-31

    Disodium [benzene-U-{sup 14}C]-(4-chlorophenylithio)methylenediphosphonate, [benzene-{sup 14}C]-Tiludronate, 2, has been prepared in six steps from [benzene-U-{sup 14}C]-acetanilide in an overall radiochemical yield of 41%. A key step in this transformation was the efficient conversion of [U-{sup 14}C]-4-chloroaniline to [benzene-U-{sup 14}C]-4-chlorophenylthiocyanate, 5, in 83% yield by treatment of the corresponding diazonium salt, 9 with iron(111) thiocyanate. It should be noted that formation of the isomeric [benzene-U-{sup 14}C]-4-chlorophenylisothiocyanate, 11, as a byproduct, was observed in only {approx} 1% yield. (author).

  9. Phosphorus effect on the uptake, translocation and accumulation of the 14C-urea in orchard grass (Dactylis glomerata L.)

    International Nuclear Information System (INIS)

    Panak, H.; Nowak, G.; Nowak, J.; Akademia Rolniczo-Technicza, Olsztyn

    1981-01-01

    The effect of different phosphorus supplies on the uptake, translocation and accumulation of 14 C-urea by orchard grass was investigated. Phosphorus starvation inhibits the uptake, translocation and accumulation of the carbon of urea similarly to the nitrogen of urea. As compared with the uptake process the reduction of the accumulation is much more effected by the inhibition of the carbon translocation from roots to the aboveground parts. Lack of phosphorus also decreases the incorporation of the 14 C of urea into high-molecular compounds. The effect of phosphorus deficit on the accumulation of 14 C-urea increases with time of starvation. (orig.)

  10. Design of a self-calibration high precision micro-angle deformation optical monitoring scheme

    Science.gov (United States)

    Gu, Yingying; Wang, Li; Guo, Shaogang; Wu, Yun; Liu, Da

    2018-03-01

    In order to meet the requirement of high precision and micro-angle measurement on orbit, a self-calibrated optical non-contact real-time monitoring device is designed. Within three meters, the micro-angle variable of target relative to measuring basis can be measured in real-time. The range of angle measurement is +/-50'', the angle measurement accuracy is less than 2''. The equipment can realize high precision real-time monitoring the micro-angle deformation, which caused by high strength vibration and shock of rock launching, sun radiation and heat conduction on orbit and so on.

  11. In vitro transfer rate of 14C from acetate-1-14C into ovarian steroids in the rat ovary during the estrous cycle and effects of LH and FSH

    International Nuclear Information System (INIS)

    Kimura, F.; Ishida, S.; Seto, K.; Kawakami, M.

    1976-01-01

    Fluctuations of ovarian biosynthetic activity and effects of exogenous LH and FSH on it during the estrous cycle were investigated by measuring in vitro transfer rates of 14 C from 14 C-1-acetate into progesterone (P), 20α-hydroxy-pregn-4-en-3-one (20α-OH-P) and estrogen (estradiol and estrone, E) in the ovarian homogenates from rats autopsied at 2 hour intervals. The transfer rate of 14 C from 14 C-1-acetate into P was lowest in the afternoon of estrus and increased from the morning of diestrus 1, making its peaks during the afternoon of diestrus 2 and in the midnight of proestrus. The transfer of 14 C into 20α-OH-P was high on the days of diestrus 2 and proestrus with its peak in the afternoon of the latter day. The maximum transfer of 14 C into E in the afternoon of proestrus and a high rate in the morning of estrus with relatively low one in the midnight were observed. Exogenously injected LH (150 μg) or FSH (150 μg) was eigther stimulatory or inhibitory to the transfer rates of 14 C from 14 C-1-acetate into ovarian steroids. During day time of diestrus 2 and midnight between proestrus and estrus, the transfer of 14 C into P and 20α-OH-P increased by LH, and during day time of proestrus and from the afternoon of estrus to the morning of diestrus 1 decreased. The transfr of 14 C into E increased by LH from the afternoon of diestrus 2 to the morning of proestrus, and decreased during the ofternoon of proestrus and from the afternoon of estrus to the morning of diestrus 2. Administration of FSH was also stimulatory or inhibitory. The 14 C transfer into P and 20α-OH-P increased by FSH from the afternoon of estrus to the morning of proestrus, but in the afternoon of proestrus they decreased. Transfer of 14 C into E increased by FSH significantly on the days of diestrus 2 and proestrus, and slightly on the day of estrus, while it decreased in the afternoon of diestrus 1. (author)

  12. A STUDY ON ADSORPTION AND DESORPTION BEHAVIORS OF 14C FROM A MIXED BED RESIN

    Directory of Open Access Journals (Sweden)

    SEUNG-CHUL PARK

    2014-12-01

    Full Text Available Spent resin waste containing a high concentration of 14C radionuclide cannot be disposed of directly. A fundamental study on selective 14C stripping, especially from the IRN-150 mixed bed resin, was carried out. In single ion-exchange equilibrium isotherm experiments, the ion adsorption capacity of the fresh resin for non-radioactive HCO3− ion, as the chemical form of 14C, was evaluated as 11mg-C/g-resin. Adsorption affinity of anions to the resin was derived in order of NO3− > HCO3− ≥ H2PO4−. Thus the competitive adsorption affinity of NO3− ion in binary systems appeared far higher than that of HCO3− or H2PO4−, and the selective desorption of HCO3− from the resin was very effective. On one hand, the affinity of Co2+ and Cs+ for the resin remained relatively higher than that of other cations in the same stripping solution. Desorption of Cs+ was minimized when the summation of the metal ions in the spent resin and the other cations in solution was near saturation and the pH value was maintained above 4.5. Among the various solutions tested, from the view-point of the simple second waste process, NH4H2PO4 solution was preferable for the stripping of 14C from the spent resin.

  13. Dynamics of 14C-labeled glucose and ammonium in saline arable soils

    International Nuclear Information System (INIS)

    Vuelvas-Solorzano, Alma; Hernandez-Matehuala, Rosalina; Conde-Barajas, Eloy; Cardenas-Manriquez, Marcela; Luna-Guido, Marco L.; Dendooven, Luc

    2009-01-01

    Organic matter dynamics and nutrient availability in saline agricultural soils of the State of Guanajuato might provide information for remediation strategies. 14 C labeled glucose with or without 200 mg kg - 1 of NH 4 + -N soil was added to two clayey agricultural soils with different electrolytic conductivity (EC), i.e. 0.94 dS m - 1 (low EC; LEC) and 6.72 dS m - 1 (high EC; HEC), to investigate the effect of N availability and salt content on organic material decomposition. Inorganic N dynamics and production of CO 2 and 14 CO 2 were monitored. Approximately 60 % of the glucose- 14 C added to LEC soil evolved as 14 CO 2 , but only 20 % in HEC soil after the incubation period of 21 days. After one day, 14 C was extractable from LEC soil, but > 500 mg 14 C from HEC soil. No N mineralization occurred in the LEC and HEC soils and glucose addition reduced the concentrations of inorganic N in unamended soil and soil amended with NH 4 + -N. The NO 2 - and NO 3 - concentrations were on average higher in LEC than in HEC soil, with exception of NO 2 - in HEC amended with NH 4 + -N. It was concluded that increases in soil EC reduced mineralization of the easily decomposable C substrate and resulted in N-depleted soil. (author)

  14. Distribution of the bispyridinium oxime [14C] HI-6 in male and female rats

    International Nuclear Information System (INIS)

    Lundy, P.M.; Hand, B.T.; Hamilton, M.G.; Broxup, B.R.; Yipchuck, G.

    1990-01-01

    The present study was designed first to determine the distribution pattern and concentration of [ 14 C] HI-6 in rats, and secondly, to determine the possibility that HI-6 might be located in high concentrations in critical tissues in the female as opposed to the male. To these ends, [ 14 C] HI-6 was administered to groups of male and female rats and its radiolabelled distribution determined by whole body autoradiography and/or by measurement of its actual concentration, by scintillation spectrometry. The experiments were repeated in the presence of 2xLD 50 soman and supporting therapy with atropine. In both sexes, HI-6 levels were highest in the kidney, followed in order by cartilage > plasma > liver > heart ≥ lung>> diaphragm > brain and spinal cord. The relative distribution in the two sexes was confirmed by both methods and was not significantly altered in the presence of soman and atropine. The lack of a measurable difference in tissue distribution of [ 14 C] HI-6 derived radioactivity between males and females suggested that the hormone-dependent difference in the protective effects previously observed was not due to selective accumulation of [ 14 C] HI-6 in organs believed to be important in its therapeutic activity, such as brain or diaphragm. (orig.)

  15. High Throughput, High Precision Hot Testing Tool for HBLED Wafer Level Testing

    Energy Technology Data Exchange (ETDEWEB)

    Solarz, Richard [KLA-Tencor Corporation, Milpitas, CA (United States); McCord, Mark [KLA-Tencor Corporation, Milpitas, CA (United States)

    2015-12-31

    The Socrates research effort developed an in depth understanding and demonstrated in a prototype tool new precise methods for teh characterization of color characteristics and flux from individual LEDs for the production of uniform quality lighting. This effort was focused on improving the color quality and consistency of solid state lighting and potentially reducing characterization costs for all LED product types. The patented laser hot testing method was demonstrated to be far more accurate than all current state of the art color and flux characterization methods in use by the solid state lighting industry today. A seperately patented LED grouping method (statistical binning) was demonstrated to be a useful approach to improving utilization of entire lots of large color and flux distributions of manufactured LEDs for high quality color solid-state lighting. At the conclusion of the research in late 2015 the solid-state lighting industry was however generally satisfied with its existing production methods for high quality color products for the small segment of customers that demand it, albeit with added costs.

  16. Studies on distribution and excretion of 14C-glycerol in rats, rabbits and mice

    International Nuclear Information System (INIS)

    Takanashi, Shigeru; Kamiyama, Hiroshi; Suzuki, Hidetaka; Tohira, Yasuo; Ogawa, Machiko

    1978-01-01

    Tissue distribution and excretion of uniformly labeled 14 C-glycerol were investigated using rats, rabbits and mice. Blood disappearance half life of 14 W/V% 14 C-glycerol in mice (1 ml/head), rats (1 ml/head) and rabbits (2 ml/head) given intravenously was 0.4, 1.8 and 2.4 hours, respectively. When 14 W/V% 14 C-glycerol was injected in rats (1 ml/head) and rabbits (2 ml/head), 65% of administered radioactivity was excreted in to expired air within 48 hrs. This suggests that glycerol is mostly metabolised via the Embden-Meyehof pathway and the TCA cycle, and finally converted to CO 2 and H 2 O. At a low dose, the conversion ratio to CO 2 was greater than the case of a high dose, and a inverse relationship was observed between the CO 2 -conversion ratio and the dose. At levels above 1 ml of 56 W/V% glycerol, an approximately constant portion of the administered dose appeared to be oxidized. The results of the whole body autoradiogram showed the distribution of the radioactivity throughout the body. Disappearance of radioactivity from liver and blood was rapid, but transport to brain, excretion to the salivary gland, and secretion to Harder's gland were slow. The distribution in tissues showed that the highest distribution of 14 C-glycerol was found in the carcass; liver showed the next highest distribution; high distribution was also found initially in the kidneys; brain, heart, lung and spleen showed low distribution, but they decreased with time elapsed. Disappearance of radioactivity from the brain was relatively slower than the liver. Besides, another result indicated that in pregnant mice 14 C-glycerol did not cross the placenta very quickly. The fact that the apparent disappearance rate from the foetuses does not seem to parallel that of the placenta is suggestive of selective accumulation in foetal tissues. (auth.)

  17. High precision locating control system based on VCM for Talbot lithography

    Science.gov (United States)

    Yao, Jingwei; Zhao, Lixin; Deng, Qian; Hu, Song

    2016-10-01

    Aiming at the high precision and efficiency requirements of Z-direction locating in Talbot lithography, a control system based on Voice Coil Motor (VCM) was designed. In this paper, we built a math model of VCM and its moving characteristic was analyzed. A double-closed loop control strategy including position loop and current loop were accomplished. The current loop was implemented by driver, in order to achieve the rapid follow of the system current. The position loop was completed by the digital signal processor (DSP) and the position feedback was achieved by high precision linear scales. Feed forward control and position feedback Proportion Integration Differentiation (PID) control were applied in order to compensate for dynamic lag and improve the response speed of the system. And the high precision and efficiency of the system were verified by simulation and experiments. The results demonstrated that the performance of Z-direction gantry was obviously improved, having high precision, quick responses, strong real-time and easily to expend for higher precision.

  18. Video-rate or high-precision: a flexible range imaging camera

    Science.gov (United States)

    Dorrington, Adrian A.; Cree, Michael J.; Carnegie, Dale A.; Payne, Andrew D.; Conroy, Richard M.; Godbaz, John P.; Jongenelen, Adrian P. P.

    2008-02-01

    A range imaging camera produces an output similar to a digital photograph, but every pixel in the image contains distance information as well as intensity. This is useful for measuring the shape, size and location of objects in a scene, hence is well suited to certain machine vision applications. Previously we demonstrated a heterodyne range imaging system operating in a relatively high resolution (512-by-512) pixels and high precision (0.4 mm best case) configuration, but with a slow measurement rate (one every 10 s). Although this high precision range imaging is useful for some applications, the low acquisition speed is limiting in many situations. The system's frame rate and length of acquisition is fully configurable in software, which means the measurement rate can be increased by compromising precision and image resolution. In this paper we demonstrate the flexibility of our range imaging system by showing examples of high precision ranging at slow acquisition speeds and video-rate ranging with reduced ranging precision and image resolution. We also show that the heterodyne approach and the use of more than four samples per beat cycle provides better linearity than the traditional homodyne quadrature detection approach. Finally, we comment on practical issues of frame rate and beat signal frequency selection.

  19. Uptake of [2-14C]abscisic acid and distribution of 14C in apple embryos

    International Nuclear Information System (INIS)

    Barthe, P.; Bulard, C.

    1981-01-01

    Pyrus malus L. var. Golden delicious embryos were incubated with (+-)-[2- 14 C] abscisic acid (ABA). After incubations of various durations, the radioactivity was measured in whole embryos, cotyledons, and embryonic axes. With either 48-h or 16-d incubation periods, the uptake of [ 14 C] ABA depended upon the mode of culture used. The lowest values corresponded to the absorption by the embryonic axis, the highest to the absorption by the distal parts of the two cotyledons. The cotyledons accumulated the main part of the radioactivity under all conditions. Dormant and almost completely after-ripened embryos cultivated for 4 d showed no significant differences in the radioactivity uptake for identical modes of culture. There was a linear relationship between exogenous ABA concentrations (0.5 to 3.10 -5 M) and ABA uptake for embryos cultivated for 4 d with the distal parts of the cotyledons immersed in the medium. (orig.) [de

  20. Uptake of (2-/sup 14/C)abscisic acid and distribution of /sup 14/C in apple embryos

    Energy Technology Data Exchange (ETDEWEB)

    Barthe, P.; Bulard, C.

    1981-01-01

    Pyrus malus L. var. Golden delicious embryos were incubated with (+-)-(2-/sup 14/C) abscisic acid (ABA). After incubations of various durations, the radioactivity was measured in whole embryos, cotyledons, and embryonic axes. With either 48-h or 16-d incubation periods, the uptake of (/sup 14/C) ABA depended upon the mode of culture used. The lowest values corresponded to the absorption by the embryonic axis, the highest to the absorption by the distal parts of the two cotyledons. The cotyledons accumulated the main part of the radioactivity under all conditions. Dormant and almost completely after-ripened embryos cultivated for 4 d showed no significant differences in the radioactivity uptake for identical modes of culture. There was a linear relationship between exogenous ABA concentrations (0.5 to 3.10/sup -5/ M) and ABA uptake for embryos cultivated for 4 d with the distal parts of the cotyledons immersed in the medium.

  1. Metabolism of U14C palmitic and 1-14C caproic acids by lettuce seeds during early germination

    International Nuclear Information System (INIS)

    Salon, C.; Raymond, P.; Pradet, A.

    1986-01-01

    Germinating lettuce embryos (before radicule emergence) were fed with either U 14 C palmitic acid or 1 14 C caproic acid until a metabolic steady state was reached. The bulk of labelled caproate was evolved as respiratory CO 2 (52%) and incorporated into organic and amino acids (38%) and only a small part incorporated into lipids whereas most of labelled palmitic acid was found into lipids (92%) and only 8% evolved as CO 2 and incorporated into organic and amino acids. The label distribution at steady state in intermediates linked to the T.C.A. cycle was interpreted using a metabolic model. They found that the two fatty acids were degraded by β-oxidation and incorporated into the T.C.A. cycle as acetylCoA suggesting that β-oxidation is located in the mitochondria. The results also indicate that lipids contribute for at least 90% to the carbon supply to respiration

  2. An Ultra-low Frequency Modal Testing Suspension System for High Precision Air Pressure Control

    Directory of Open Access Journals (Sweden)

    Qiaoling YUAN

    2014-05-01

    Full Text Available As a resolution for air pressure control challenges in ultra-low frequency modal testing suspension systems, an incremental PID control algorithm with dead band is applied to achieve high-precision pressure control. We also develop a set of independent hardware and software systems for high-precision pressure control solutions. Taking control system versatility, scalability, reliability, and other aspects into considerations, a two-level communication employing Ethernet and CAN bus, is adopted to complete such tasks as data exchange between the IPC, the main board and the control board ,and the pressure control. Furthermore, we build a single set of ultra-low frequency modal testing suspension system and complete pressure control experiments, which achieve the desired results and thus confirm that the high-precision pressure control subsystem is reasonable and reliable.

  3. High-Precision Mass Measurements of Exotic Nuclei with the Triple-Trap Mass Spectrometer Isoltrap

    CERN Multimedia

    Blaum, K; Zuber, K T; Stanja, J

    2002-01-01

    The masses of close to 200 short-lived nuclides have already been measured with the mass spectrometer ISOLTRAP with a relative precision between 1$\\times$10$^{-7}$ and 1$\\times$10^{-8}$. The installatin of a radio-frequency quadrupole trap increased the overall efficiency by two orders of magnitude which is at present about 1%. In a recent upgrade, we installed a carbon cluster laser ion source, which will allow us to use carbon clusters as mass references for absolute mass measurements. Due to these improvements and the high reliability of ISOLTRAP we are now able to perform accurate high-precision mass measurements all over the nuclear chart. We propose therefore mass measurements on light, medium and heavy nuclides on both sides of the valley of stability in the coming four years. ISOLTRAP is presently the only instrument capable of the high precision required for many of the proposed studies.

  4. Laser-Induced Focused Ultrasound for Cavitation Treatment: Toward High-Precision Invisible Sonic Scalpel.

    Science.gov (United States)

    Lee, Taehwa; Luo, Wei; Li, Qiaochu; Demirci, Hakan; Guo, L Jay

    2017-10-01

    Beyond the implementation of the photoacoustic effect to photoacoustic imaging and laser ultrasonics, this study demonstrates a novel application of the photoacoustic effect for high-precision cavitation treatment of tissue using laser-induced focused ultrasound. The focused ultrasound is generated by pulsed optical excitation of an efficient photoacoustic film coated on a concave surface, and its amplitude is high enough to produce controllable microcavitation within the focal region (lateral focus <100 µm). Such microcavitation is used to cut or ablate soft tissue in a highly precise manner. This work demonstrates precise cutting of tissue-mimicking gels as well as accurate ablation of gels and animal eye tissues. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Autoradiography of [14C]paraquat or [14C]diquat in frogs and mice: accumulation in neuromelanin

    International Nuclear Information System (INIS)

    Lindquist, N.G.; Larsson, B.S.; Lyden-Sokolowski, A.

    1988-01-01

    The herbicide paraquat has been suggested as a causative agent for Parkinson's disease because of its structural similarity to a metabolite of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), which may induce a parkinsonism-like condition. MPTP as well as its metabolite 1-methyl-4-phenylpyridine have melanin affinity, and the parkinsonism-inducing potency of MPTP is much stronger in species with melanin in the nerve cells. Autoradiography of [ 3 H]MPTP in experimental animals has shown accumulation in melanin-containing tissues, including pigmented neurons. In the present whole body autoradiographic study accumulation and retention was seen in neuromelanin in frogs after i.p. injection of [ 14 C]paraquat or[ 14 C]diquat. By means of whole body autoradiography of [ 14 C]diquat in mice (a species with no or very limited amounts of neuromelanin) a low, relatively uniformly distributed level of radioactivity was observed in brain tissue. Accumulation of toxic chemical compounds, such as paraquat, in neuromelanin may ultimately cause lesions in the pigmented nerve cells, leading to Parkinson's disease

  6. Autoradiography of ( sup 14 C)paraquat or ( sup 14 C)diquat in frogs and mice: accumulation in neuromelanin

    Energy Technology Data Exchange (ETDEWEB)

    Lindquist, N G; Larsson, B S; Lyden-Sokolowski, A [Uppsala Univ., Biomedical Center, (Sweden). Dept. of Toxicology

    1988-10-31

    The herbicide paraquat has been suggested as a causative agent for Parkinson's disease because of its structural similarity to a metabolite of 1-methyl-4-phenyl-1,2,3,6-tetrahydropyridine (MPTP), which may induce a parkinsonism-like condition. MPTP as well as its metabolite 1-methyl-4-phenylpyridine have melanin affinity, and the parkinsonism-inducing potency of MPTP is much stronger in species with melanin in the nerve cells. Autoradiography of ({sup 3}H)MPTP in experimental animals has shown accumulation in melanin-containing tissues, including pigmented neurons. In the present whole body autoradiographic study accumulation and retention was seen in neuromelanin in frogs after i.p. injection of ({sup 14}C)paraquat or({sup 14}C)diquat. By means of whole body autoradiography of ({sup 14}C)diquat in mice (a species with no or very limited amounts of neuromelanin) a low, relatively uniformly distributed level of radioactivity was observed in brain tissue. Accumulation of toxic chemical compounds, such as paraquat, in neuromelanin may ultimately cause lesions in the pigmented nerve cells, leading to Parkinson's disease.

  7. Plasma, cerebrospinal fluid, and brain distribution of 14C-melatonin in rat: a biochemical and autoradiographic study

    International Nuclear Information System (INIS)

    Vitte, P.A.; Harthe, C.; Lestage, P.; Claustrat, B.; Bobillier, P.

    1988-01-01

    The distribution of 14C-Melatonin (14C-MT) after systemic injection was studied in the plasma, cerebrospinal fluid (CSF), and brain of rats. Chromatographic analysis (thin-layer chromatography and high-performance liquid chromatography) indicated that the radioactivity from biological samples taken at various times following the injection of label was mainly associated with 14C-MT. Computer analysis of plasma 14C-MT kinetics showed a three-compartment system with half-lives of 0.21 +/- 0.05, 5.97 +/- 1.11, and 47.52 +/- 8.86 min. The volume of distribution and the clearance were 1,736 +/- 349 ml.kg-1 and 25.1 +/- 1.7 ml.min-1.kg-1 respectively. The entry of 14C-MT into the CSF was rapid and reached a maximum at 5 min. The decay followed a two-compartment system with half-lives of 16.5 +/- 2.9 and 47.3 +/- 8.6 min. The CSF/plasma concentration ratio was 0.38 at the steady state (30 min). At 2 min the level of 14C-MT in the brain was 3.8 higher than in the CSF. Representative autoradiograms revealed an heterogeneous localization of 14C-MT in the grey matter. The highest regional values, as evaluated by the permeability area product technique, were found in cortex, thalamic nuclei, medial geniculate nucleus, anterior pretectal area, paraventricular nucleus of the hypothalamus, choroid plexuses, and bulb-pons. Thirty minutes later 14C-MT was still detected in most of the brain regions analyzed. These results point to a low but rapid penetration of circulating MT into the brain and the CSF. The heterogeneous distribution and the partial retention of 14C-MT in the brain are compatible with the hypothesis of a central action of this hormone mediated via binding sites

  8. Metabolism of [14C]indole-3-acetic acid by the cortical and stelar tissues of Zea mays L. roots

    International Nuclear Information System (INIS)

    Nonhebel, H.M.; Hillman, J.R.; Crozier, A.; Wilkins, M.B.

    1985-01-01

    Reverse-phase high-performance liquid chromatography was used to analyse 14 C-labelled metabolites of idole-3-acetic acid (IAA) formed in the cortical and stelar tissues of Zea mays roots. After a 2-h incubation in [ 14 C]IAA, stelar segments had metabolised between 1-6% of the methanol-extractable radioactivity compared with 91-92% by the cortical segments. The pattern of metabolites produced by cortical segments was similar to that produced by intact segments bathed in aqueous solutions of [ 14 C]IAA. In contrast, when IAA was supplied in agar blocks to stelar tissue protruding from the basal ends of segments, negligible metabolism was evident. On the basis of its retention characteristics both before and after methylation, the major metabolite of [ 14 C]IAA in Zea mays root segments was tentatively identified by high-performance liquid chromatography as oxindole-3-acetic acid. (orig.)

  9. Practical synthesis of 14C S-ribosyl-L-homocysteine uniformly labelled on the sugar moiety. An enzymatic route from (U-14C) adenosine

    International Nuclear Information System (INIS)

    Guillerm, G.; Allart, B.

    1992-01-01

    [(U- 14 C) S-Ribosyl]-L-homocysteine has been prepared enzymatically from (U- 14 C) adenosine in two steps using S-adenosyl homocysteine hydrolase and bacterial S-adenosyl homocysteine nucleosidase as catalysts. (Author)

  10. A study of the reactions 14C( vector d, dprime)14C and 14C ( vector d, p)15C at 16.0 MeV

    International Nuclear Information System (INIS)

    Murillo, G.; Sen, S.; Darden, S.E.

    1994-01-01

    Cross-section and vector-analyzing-power measurements for 14 C(d, d prime) and 14 C(d, p) reactions have been carried out for E d =16 MeV. The inelastic-scattering data have been analyzed using the DWBA with a collective and a microscopic model form-factor and also by using the coupled-channels formalism with a vibrational model form-factor. It is observed that while the cross-section angular-distribution data for the two 2 + states at E x =7.012 and 8.318 MeV are very similar, the corresponding vector analyzing powers are quite different. The results of the analyses indicate that the distinctive characteristics probably arise from the difference in the relative importance of the proton and neutron components in the transition amplitude. The 3 - state at E x =6.728 MeV is identified as predominantly a 1p-3h state. Although the deformation parameters are relatively large, the single-particle structure aspects play a more dominant role than channel-coupling effects in populating the inelastic states. The transfer reaction data have been analyzed using the DWBA for bound and unbound states. The importance of two-step processes has been investigated via coupled-reaction-channels calculations. The g.s. and the states with excitation energies 0.770, 3.103 and 4.78 MeV in 15 C are populated primarily by a one-step process with a small two-step contribution in the case of the 3.103 MeV state. The 4.22 MeV state is populated predominantly by two-step processes. The 4.78 and the 5.83 MeV states have been identified as 1p-2h and 3p-4h, [3]/[2] + state, respectively, in an earlier report. There is close similarity in the level structures and reaction mechanisms between the states of 15 C and 17 O populated via the (d, p) reaction. ((orig.))

  11. A High Precision Laser-Based Autofocus Method Using Biased Image Plane for Microscopy

    Directory of Open Access Journals (Sweden)

    Chao-Chen Gu

    2018-01-01

    Full Text Available This study designs and accomplishes a high precision and robust laser-based autofocusing system, in which a biased image plane is applied. In accordance to the designed optics, a cluster-based circle fitting algorithm is proposed to calculate the radius of the detecting spot from the reflected laser beam as an essential factor to obtain the defocus value. The experiment conduct on the experiment device achieved novel performance of high precision and robustness. Furthermore, the low demand of assembly accuracy makes the proposed method a low-cost and realizable solution for autofocusing technique.

  12. Optimization of the data taking strategy for a high precision τ mass measurement

    International Nuclear Information System (INIS)

    Wang, Y.K.; Mo, X.H.; Yuan, C.Z.; Liu, J.P.

    2007-01-01

    To achieve a high precision τ mass (m τ ) measurement at the forthcoming high luminosity experiment, Monte Carlo simulation and sampling technique are adopted to simulate various data taking cases from which the optimal scheme is determined. The study indicates that when m τ is the sole parameter to be fit, the optimal energy for data taking is located near the τ + τ - production threshold in the vicinity of the largest derivative of the cross-section to energy; one point in the optimal position with luminosity around 63pb -1 is sufficient for getting a statistical precision of 0.1MeV/c 2 or better

  13. High precision NC lathe feeding system rigid-flexible coupling model reduction technology

    Science.gov (United States)

    Xuan, He; Hua, Qingsong; Cheng, Lianjun; Zhang, Hongxin; Zhao, Qinghai; Mao, Xinkai

    2017-08-01

    This paper proposes the use of dynamic substructure method of reduction of order to achieve effective reduction of feed system for high precision NC lathe feeding system rigid-flexible coupling model, namely the use of ADAMS to establish the rigid flexible coupling simulation model of high precision NC lathe, and then the vibration simulation of the period by using the FD 3D damper is very effective for feed system of bolt connection reduction of multi degree of freedom model. The vibration simulation calculation is more accurate, more quickly.

  14. Design of high precision temperature control system for TO packaged LD

    Science.gov (United States)

    Liang, Enji; Luo, Baoke; Zhuang, Bin; He, Zhengquan

    2017-10-01

    Temperature is an important factor affecting the performance of TO package LD. In order to ensure the safe and stable operation of LD, a temperature control circuit for LD based on PID technology is designed. The MAX1978 and an external PID circuit are used to form a control circuit that drives the thermoelectric cooler (TEC) to achieve control of temperature and the external load can be changed. The system circuit has low power consumption, high integration and high precision,and the circuit can achieve precise control of the LD temperature. Experiment results show that the circuit can achieve effective and stable control of the laser temperature.

  15. 14C-Methylenebisphenylisocyanate (14C-MDI). Study of absorption after single dermal and intradermal administration in rats

    International Nuclear Information System (INIS)

    Leibold, E.; Hoffmann, H.D.; Hildebrand, B.

    1999-01-01

    The absorption, distribution and excretion of radioactivity was studied in groups of four male Wistar rats following a single dermal and intradermal administration of 14 C- Methylenebisphenylisocyanate ( 14 C-MDI) at nominal dose levels of 4.0 and 0.4 mg/cm 2 for dermal administration and 0.4 mg/animal for intradermal administration. These dose levels nominally corresponded to 40 and 4.0 mg/animal for dermal administration. Considering the animal weights, dose levels corresponded to about 140 and 14 mg/kg body weight (dermal administration) and 1.4 mg/kg body weight (intradermal administration). In the experiments with dermal administration, animals were exposed for 8 hours and sacrificed 8, 24 or 120 h after beginning of exposure. In the experiment with intradermal administration, animals were sacrificed 120 h after treatment. After dermal administration of 14 C-MDI, mean recoveries of radioactivity from all dose groups were in the range from 97.86 to 108.07% of the total radioactivity administered. Generally, the largest proportion of radioactivity was found at the application site and dressing. The total amount of radioactivity absorbed (including excreta, cage wash, tissues/organs and carcass) increased with increasing sacrifice time. Dermal absorption was very low and quantitatively similar at both dose levels; maximally ca. 0.9 % of the applied radioactivity was absorbed. After intradermal administration of 14 C-MDI, the mean recovery of radioactivity was 100.90 % of the radioactivity administered. The largest proportion of radioactivity was found at the application site. The total amount of radioactivity absorbed (including excreta, cage wash, tissues/organs and carcass) amounted to about 26 % of the radioactivity applied. Irrespective of the mode of administration of 1 4C -MDI, concentrations of radioactivity in tissues and organs generally were below 1 μg Eq/g at 120 h after administration. In summary, the results of this study comparing systemic

  16. Precision and reproducibility in AMS radiocarbon measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Hotchkis, M A; Fink, D; Hua, Q; Jacobsen, G E; Lawson, E M; Smith, A M; Tuniz, C [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1997-12-31

    Accelerator Mass Spectrometry (AMS) is a technique by which rare radioisotopes such as {sup 14}C can be measured at environmental levels with high efficiency. Instead of detecting radioactivity, which is very weak for long-lived environmental radioisotopes, atoms are counted directly. The sample is placed in an ion source, from which a negative ion beam of the atoms of interest is extracted, mass analysed, and injected into a tandem accelerator. After stripping to positive charge states in the accelerator HV terminal, the ions are further accelerated, analysed with magnetic and electrostatic devices and counted in a detector. An isotopic ratio is derived from the number of radioisotope atoms counted in a given time and the beam current of a stable isotope of the same element, measured after the accelerator. For radiocarbon, {sup 14}C/{sup 13}C ratios are usually measured, and the ratio of an unknown sample is compared to that of a standard. The achievable precision for such ratio measurements is limited primarily by {sup 14}C counting statistics and also by a variety of factors related to accelerator and ion source stability. At the ANTARES AMS facility at Lucas Heights Research Laboratories we are currently able to measure {sup 14}C with 0.5% precision. In the two years since becoming operational, more than 1000 {sup 14}C samples have been measured. Recent improvements in precision for {sup 14}C have been achieved with the commissioning of a 59 sample ion source. The measurement system, from sample changing to data acquisition, is under common computer control. These developments have allowed a new regime of automated multi-sample processing which has impacted both on the system throughput and the measurement precision. We have developed data evaluation methods at ANTARES which cross-check the self-consistency of the statistical analysis of our data. Rigorous data evaluation is invaluable in assessing the true reproducibility of the measurement system and aids in

  17. Precision and reproducibility in AMS radiocarbon measurements.

    Energy Technology Data Exchange (ETDEWEB)

    Hotchkis, M.A.; Fink, D.; Hua, Q.; Jacobsen, G.E.; Lawson, E. M.; Smith, A.M.; Tuniz, C. [Australian Nuclear Science and Technology Organisation, Lucas Heights, NSW (Australia)

    1996-12-31

    Accelerator Mass Spectrometry (AMS) is a technique by which rare radioisotopes such as {sup 14}C can be measured at environmental levels with high efficiency. Instead of detecting radioactivity, which is very weak for long-lived environmental radioisotopes, atoms are counted directly. The sample is placed in an ion source, from which a negative ion beam of the atoms of interest is extracted, mass analysed, and injected into a tandem accelerator. After stripping to positive charge states in the accelerator HV terminal, the ions are further accelerated, analysed with magnetic and electrostatic devices and counted in a detector. An isotopic ratio is derived from the number of radioisotope atoms counted in a given time and the beam current of a stable isotope of the same element, measured after the accelerator. For radiocarbon, {sup 14}C/{sup 13}C ratios are usually measured, and the ratio of an unknown sample is compared to that of a standard. The achievable precision for such ratio measurements is limited primarily by {sup 14}C counting statistics and also by a variety of factors related to accelerator and ion source stability. At the ANTARES AMS facility at Lucas Heights Research Laboratories we are currently able to measure {sup 14}C with 0.5% precision. In the two years since becoming operational, more than 1000 {sup 14}C samples have been measured. Recent improvements in precision for {sup 14}C have been achieved with the commissioning of a 59 sample ion source. The measurement system, from sample changing to data acquisition, is under common computer control. These developments have allowed a new regime of automated multi-sample processing which has impacted both on the system throughput and the measurement precision. We have developed data evaluation methods at ANTARES which cross-check the self-consistency of the statistical analysis of our data. Rigorous data evaluation is invaluable in assessing the true reproducibility of the measurement system and aids in

  18. XCAMS: The compact 14C accelerator mass spectrometer extended for 10Be and 26Al at GNS Science, New Zealand

    Science.gov (United States)

    Zondervan, A.; Hauser, T. M.; Kaiser, J.; Kitchen, R. L.; Turnbull, J. C.; West, J. G.

    2015-10-01

    A detailed description is given of the 0.5 MV tandem accelerator mass spectrometry (AMS) system for 10Be, 14C, 26Al, installed in early 2010 at GNS Science, New Zealand. Its design follows that of previously commissioned Compact 14C-only AMS (CAMS) systems based on the Pelletron tandem accelerator. The only basic departure from that design is an extension of the rare-isotope achromat with a 45° magnet and a two-anode gas-ionisation detector, to provide additional filtering for 10Be. Realised performance of the three AMS modes is discussed in terms of acceptance-test scores, 14C Poisson and non-Poisson errors, and 10Be detection limit and sensitivity. Operational details and hardware improvements, such as 10Be beam transport and particle detector setup, are highlighted. Statistics of repeat measurements of all graphitised 14C calibration cathodes since start-up show that 91% of their total uncertainty values are less than 0.3%, indicating that the rare-isotope beamline extension has not affected precision of 14C measurement. For 10Be, the limit of detection in terms of the isotopic abundance ratio 10Be/9Be is 6 × 10-15 at at-1 and the total efficiency of counting atoms in the sample cathode is 1/8500 (0.012%).

  19. Super high precision 200 ppi liquid crystal display series; Chokoseido 200 ppi ekisho display series

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2000-03-01

    In mobile equipment, in demand is a high precision liquid crystal display (LCD) having the power of expression equivalent to printed materials like magazines because of the necessity of displaying a large amount of information on a easily potable small screen. In addition, with the spread and high-quality image of digital still cameras, it is strongly desired to display photographed digital image data in high quality. Toshiba Corp., by low temperature polysilicone (p-Si) technology, commercialized the liquid crystal display series of 200 ppi (pixels per inch) precision dealing with the rise of the high-precision high-image quality LCD market. The super high precision of 200 ppi enables the display of smooth beautiful animation comparable to printed sheets of magazines and photographs. The display series are suitable for the display of various information services such as electronic books and electronic photo-viewers including internet. The screen sizes lined up are No. 4 type VGA (640x480 pixels) of a small pocket notebook size and No. 6.3 type XGA (1,024x768 pixels) of a paperback size, with a larger screen to be furthered. (translated by NEDO)

  20. 14C accelerator mass spectrometry - applications in archaeology, biomedicine and in the atmospheric sciences

    International Nuclear Information System (INIS)

    Rom, W.

    1990-03-01

    amine DNA adducts in humans. 'Bomb-peak' dating of macromolecular substances such as collagen, lipids and keratin from individuals of different age was used to study carbon turnover times in humans. With regard to forensic medicine, collagen has to be discarded for reliable determination of the time of death due to its long turnover time of several decades, whereas using the 'short-lived' lipids and also keratin for that purpose looks highly promising. In the Atmospheric Sciences emphasis was put on the role of 14 C monoxide. 14 CO is so far the only natural gauge of the hydroxyl (OH) radical which is the most important, however short-lived, oxidant in the atmosphere. From air samples, taken at Mt. Sonnblick, Austria since 1996 and comprising about 600 liters each, a first detailed long-term record of 14 C (and stable isotope analysis) in atmospheric CO has been obtained for the temperate northern hemisphere. The overall detection limit is about 1/4 molecule 14 CO in one cm 3 of air. A low-background graphitization unit for small samples made sample processing possible at a background level of 0.1 to 0.2 percent Modern Carbon. In this connection, the term 'percent Modern Carbon' used in many 14 C studies was critically examined. Due to its ability to discriminate biogenic from fossil carbon sources, 14 C AMS is also helpful in the analysis and identification of individual organic components in aerosols which still is a major problem. Water-insoluble carbon in aerosols, filtered from snow samples at Mt. Sonnblick and yielding a sample amount of a few tens μg C, was investigated. About 65 % of this non-soluble carbon was of biogenic origin. Statistically significant temporal variations of the 14 C/ 12 C isotopic ratios of the snow aerosol samples suggest alterations in the contribution of specific aerosol sources. (author)

  1. High Precision Measurement of the differential W and Z boson cross-sections

    CERN Document Server

    Gasnikova, Ksenia; The ATLAS collaboration

    2017-01-01

    Measurements of the Drell-Yan production of W and Z/gamma bosons at the LHC provide a benchmark of our understanding of perturbative QCD and probe the proton structure in a unique way. The ATLAS collaboration has performed new high precision measurements at center-of-mass energies of 7. The measurements are performed for W+, W- and Z/gamma bosons integrated and as a function of the boson or lepton rapidity and the Z/gamma* mass. Unprecedented precision is reached and strong constraints on Parton Distribution functions, in particular the strange density are found. Z cross sections are also measured at a center-of-mass energies of 8TeV and 13TeV, and cross-section ratios to the top-quark pair production have been derived. This ratio measurement leads to a cancellation of several systematic effects and allows therefore for a high precision comparison to the theory predictions.

  2. Laser-generated ultrasound for high-precision cutting of tissue-mimicking gels (Conference Presentation)

    Science.gov (United States)

    Lee, Taehwa; Luo, Wei; Li, Qiaochu; Guo, L. Jay

    2017-03-01

    Laser-generated focused ultrasound has shown great promise in precisely treating cells and tissues by producing controlled micro-cavitation within the acoustic focal volume (30 MPa, negative pressure amplitude). By moving cavitation spots along pre-defined paths through a motorized stage, tissue-mimicking gels of different elastic moduli were cut into different shapes (rectangle, triangle, and circle), leaving behind the same shape of holes, whose sizes are less than 1 mm. The cut line width is estimated to be less than 50 um (corresponding to localized cavitation region), allowing for accurate cutting. This novel approach could open new possibility for in-vivo treatment of diseased tissues in a high-precision manner (i.e., high-precision invisible sonic scalpel).

  3. A High-precision Motion Compensation Method for SAR Based on Image Intensity Optimization

    Directory of Open Access Journals (Sweden)

    Hu Ke-bin

    2015-02-01

    Full Text Available Owing to the platform instability and precision limitations of motion sensors, motion errors negatively affect the quality of synthetic aperture radar (SAR images. The autofocus Back Projection (BP algorithm based on the optimization of image sharpness compensates for motion errors through phase error estimation. This method can attain relatively good performance, while assuming the same phase error for all pixels, i.e., it ignores the spatial variance of motion errors. To overcome this drawback, a high-precision motion error compensation method is presented in this study. In the proposed method, the Antenna Phase Centers (APC are estimated via optimization using the criterion of maximum image intensity. Then, the estimated APCs are applied for BP imaging. Because the APC estimation equals the range history estimation for each pixel, high-precision phase compensation for every pixel can be achieved. Point-target simulations and processing of experimental data validate the effectiveness of the proposed method.

  4. Synthesis of 1-benzyl-4-[(5,6-dimethoxy[2-14C]-1-indanon)-2-YL]-methylpiperidine hydrochloride (E2020-14C)

    International Nuclear Information System (INIS)

    Iimura, Youichi; Mishima, Mannen; Sugimoto, Hachiro

    1989-01-01

    1-Benzyl-4-[(5,6-dimethoxy[2- 14 C]-1-indanon)-2-yl]-methylpiperidine hydrochloride (E2020- 14 C), and acetylcholinesterase inhibitor for studying the pharmacokinetic profiles of E2020, was synthesized from 5,6-dimethoxy[2- 14 C]-1-indanone as the labelled starting material. (author)

  5. Synthesis of 1-benzyl-4-((5,6-dimethoxy(2- sup 14 C)-1-indanon)-2-YL)-methylpiperidine hydrochloride (E2020- sup 14 C)

    Energy Technology Data Exchange (ETDEWEB)

    Iimura, Youichi; Mishima, Mannen; Sugimoto, Hachiro (Eisai Co., Ltd., Ibaraki (Japan). Tsukuba Research Labs.)

    1989-07-01

    1-Benzyl-4-((5,6-dimethoxy(2-{sup 14}C)-1-indanon)-2-yl)-methylpiperidine hydrochloride (E2020-{sup 14}C), and acetylcholinesterase inhibitor for studying the pharmacokinetic profiles of E2020, was synthesized from 5,6-dimethoxy(2-{sup 14}C)-1-indanone as the labelled starting material. (author).

  6. Combustion synthesis of ceramic matrices for immobilization of 14C

    International Nuclear Information System (INIS)

    Bosc-Rouessac, F.; Marin-Ayral, R.M.; Haidoux, A.; Massoni, N.; Bart, F.

    2008-01-01

    In this study, the use of combustion synthesis for immobilization of 14 C was considered. Ceramic matrices have been prepared by this method using two different devices: one non-conventional with preheating of the samples and the other conventional device where ignition was produced thanks to tungsten filament. These two devices gave rise to different mechanisms of reactions involving different amounts of unreacted carbon graphite inside the matrix. The SHS samples were characterized by using scanning electron microscopy (SEM) and X-ray diffraction (XRD)

  7. Studies on 14C labelled chlorpyrifos in model marine ecosystem

    International Nuclear Information System (INIS)

    Pandit, G.G.; Mohan Rao, A.M.; Kale, S.P.; Murthy, N.B.K.; Raghu, K.

    1997-01-01

    Chlorpyrifos is one of the widely used organophosphorus insecticides in tropical countries. Experiments were conducted with 14 C labelled chlorpyrifos to study the distribution of this compound in model marine ecosystem. Less than 50 per cent of the applied activity remained in water in 24 h. Major portion of the applied chlorpyrifos (about 4.2 % residue per g) accumulated into the clams with sediment containing a maximum of 5 to 6 per cent of applied compound. No degradation of chlorpyrifos was observed in water or sediment samples. However, metabolic products were formed in clams. (author). 4 refs., 3 tabs

  8. The synthesis of 2-14C-N-nitrosothiazolidine

    International Nuclear Information System (INIS)

    Cragin, D.W.; Shibamoto, Takayuki

    1989-01-01

    2- 14 C-N-Nitrosothiazolidine was synthesized with a chemical purity of 99.6%, a radio chemical purity of 99.4%, and an overall yield of 30.7%. Unlabelled N-nitrosothiazolidine, synthesized using the same method, resulted in a purity of 99.85% by capillary GC and 99.7% by HPLC. Analysis of N-nitrosothiazolidine by GC was found to require a low injection port temperature of 160 0 C to prevent denitrosation in the injection port. During the nitrosation of thiazolidine, if the pH was reduced below 4 with hydrochloric acid, ring hydrolysis occurred, and chlorinated disulfide compounds formed. (author)

  9. Chemical radiolabeling of carboxyatractyloside by [14C]acetic anhydride

    International Nuclear Information System (INIS)

    Block, M.R.; Pougeois, R.; Vignais, P.V.

    1980-01-01

    The authors report the synthesis and biological properties of a radiolabeled derivative of CAT obtained with acetylation of the primary alcohol of CAT with radiolabeled acetic anhydride. They also investigate the question of mutual exclusion of CAT and BA for binding to the mitochondrial ADP/ATP carrier in double labeling experiments based on the use of [ 3 H]BA and [ 14 C]Ac-CAT. The results are consistent with the view that the ADP/ATP carrier possesses two separate interacting binding sites for AT (or CAT) and for BA. (Auth.)

  10. Low-level (submicromole) environmental 14C metrology

    International Nuclear Information System (INIS)

    Currie, L.A.; Kessler, J.D.; Marolf, J.V.; McNichol, A.P.; Stuart, D.R.; Donoghue, J.C.; Donahue, D.J.; Burr, G.S.; Biddulph, D.

    2000-01-01

    Accelerator mass spectrometry (AMS) measurements of environmental 14 C have been employed during the past decade at the several micromole level (tens of μg carbon), but advanced research in the atmospheric and marine sciences demands still higher (μg) sensitivity, an extreme example being the determination of 14 C in elemental or 'black' carbon (BC) at levels of 2-10 μg per kg of Greenland snow and ice (Currie et al., 1998). A fundamental limitation for 14 C AMS is Poisson counting statistics, which sets in at about 1 μg modern-C. Using the small sample (25 μg) AMS target preparation facility at NOSAMS (Pearson et al., 1998), and the microsample combustion-dilution facility at NIST, we have demonstrated an intrinsic modern-C quantification limit (m Q ) of ca. 0.9 μg, based on a 1-parameter fit to the empirical AMS variance function. (For environmental 14 C, the modern carbon quantification limit is defined as that mass (m Q ) corresponding to 10% relative standard deviation (rsd) for the fraction of modern carbon, σ(f M )/f M .) Stringent control, required for quantitative dilution factors (DL), is achieved with the NIST on-line manometric/mass spectrometry facility that compensates also for unsuspected trace impurities from vigorous chemical processing (e.g., acid digestion). Our current combustion blank is trivial (mean: 0.16 ± 0.02 μg C, n=13) but lognormally distributed (dispersion [σ]: 0.07 ± 0.01 μg). An iterative numerical expression is introduced to assess the quantitative impacts of fossil and modern carbon blank components on m Q ; and a new 'clean chemistry' BC processing system is described for the minimization of such blanks. For the assay of soot carbon in Greenland snow/ice, the overall processing blank has been reduced from nearly 7 μg total carbon to less than 1 μg, and is undetectable for BC

  11. Application of 14C to physiological studies of insects

    International Nuclear Information System (INIS)

    Yamashita, Okitsugu

    1977-01-01

    The specificity of insects which has been resolved as a result of using tracers such as 14 C etc. and the metabolic ground of vital condition which is not observed in other biotic groups were discussed. As for carbohydrate metabolism, trehalose metabolism, the relation between formation of polyhydric alcohol and quiescence, and energy production system were mentioned. As for lipid metabolism, mobilization of diglyceride among tissues, purification and properties of diglyceride-carrying lipoprotein, and the physiological action of lipoprotein were cited. The specific metabolisms of insects were summarized from the viewpoints of energy production and its distribution mechanism in vivo. (Ichikawa, K.)

  12. High-precision mass measurements for the rp-process at JYFLTRAP

    Directory of Open Access Journals (Sweden)

    Canete Laetitia

    2017-01-01

    Full Text Available The double Penning trap JYFLTRAP at the University of Jyväskylä has been successfully used to achieve high-precision mass measurements of nuclei involved in the rapid proton-capture (rp process. A precise mass measurement of 31Cl is essential to estimate the waiting point condition of 30S in the rp-process occurring in type I x-ray bursts (XRBs. The mass-excess of 31C1 measured at JYFLTRAP, -7034.7(3.4 keV, is 15 more precise than the value given in the Atomic Mass Evaluation 2012. The proton separation energy Sp determined from the new mass-excess value confirmed that 30S is a waiting point, with a lower-temperature limit of 0.44 GK. The mass of 52Co effects both 51Fe(p,γ52Co and 52Co(p,γ53Ni reactions. The mass-excess value measured, - 34 331.6(6.6 keV is 30 times more precise than the value given in AME2012. The Q values for the 51Fe(p,γ52Co and 52Co(p,γ53Ni reactions are now known with a high precision, 1418(11 keV and 2588(26 keV respectively. The results show that 52Co is more proton bound and 53Ni less proton bound than what was expected from the extrapolated value.

  13. Determining the biomass fraction of mixed waste fuels: A comparison of existing industry and {sup 14}C-based methodologies

    Energy Technology Data Exchange (ETDEWEB)

    Muir, G.K.P., E-mail: Graham.Muir@glasgow.ac.uk [SUERC Radiocarbon Laboratory, Scottish Universities Environmental Research Centre (SUERC), Rankine Avenue, East Kilbride G75 0QF, Scotland (United Kingdom); Hayward, S. [Stopford Energy and Environment, The Gordon Manley Building, Lancaster University, Lancaster LA1 4YQ, England (United Kingdom); Tripney, B.G.; Cook, G.T.; Naysmith, P. [SUERC Radiocarbon Laboratory, Scottish Universities Environmental Research Centre (SUERC), Rankine Avenue, East Kilbride G75 0QF, Scotland (United Kingdom); Herbert, B.M.J. [Stopford Energy and Environment, The Gordon Manley Building, Lancaster University, Lancaster LA1 4YQ, England (United Kingdom); Garnett, M.H [NERC Radiocarbon Facility, Scottish Enterprise Technology Park, Rankine Avenue, East Kilbride G75 0QF, Scotland (United Kingdom); Wilkinson, M. [Stopford Energy and Environment, The Gordon Manley Building, Lancaster University, Lancaster LA1 4YQ, England (United Kingdom)

    2015-01-15

    Highlights: • Compares industry standard and {sup 14}C methods for determining bioenergy content of MSW. • Differences quantified through study at an operational energy from waste plant. • Manual sort and selective dissolution are unreliable measures of feedstock bioenergy. • {sup 14}C methods (esp. AMS) improve precision and reliability of bioenergy determination. • Implications for electricity generators and regulators for award of bio-incentives. - Abstract: {sup 14}C analysis of flue gas by accelerator mass spectrometry (AMS) and liquid scintillation counting (LSC) were used to determine the biomass fraction of mixed waste at an operational energy-from-waste (EfW) plant. Results were converted to bioenergy (% total) using mathematical algorithms and assessed against existing industry methodologies which involve manual sorting and selective dissolution (SD) of feedstock. Simultaneous determinations using flue gas showed excellent agreement: 44.8 ± 2.7% for AMS and 44.6 ± 12.3% for LSC. Comparable bioenergy results were obtained using a feedstock manual sort procedure (41.4%), whilst a procedure based on selective dissolution of representative waste material is reported as 75.5% (no errors quoted). {sup 14}C techniques present significant advantages in data acquisition, precision and reliability for both electricity generator and industry regulator.

  14. Using High-Precision Specific Gravity Measurements to Study Minerals in Undergraduate Geoscience Courses

    Science.gov (United States)

    Brandriss, Mark E.

    2010-01-01

    This article describes ways to incorporate high-precision measurements of the specific gravities of minerals into undergraduate courses in mineralogy and physical geology. Most traditional undergraduate laboratory methods of measuring specific gravity are suitable only for unusually large samples, which severely limits their usefulness for student…

  15. MiniDSS: a low-power and high-precision miniaturized digital sun sensor

    NARCIS (Netherlands)

    Boer, B.M. de; Durkut, M.; Laan, E.; Hakkesteegt, H.; Theuwissen, A.; Xie, N.; Leijtens, J.L.; Urquijo, E.; Bruins, P.

    2012-01-01

    A high-precision and low-power miniaturized digital sun sensor has been developed at TNO. The single-chip sun sensor comprises an application specific integrated circuit (ASIC) on which an active pixel sensor (APS), read-out and processing circuitry as well as communication circuitry are combined.

  16. High Precision Optical Observations of Space Debris in the Geo Ring from Venezuela

    Science.gov (United States)

    Lacruz, E.; Abad, C.; Downes, J. J.; Casanova, D.; Tresaco, E.

    2018-01-01

    We present preliminary results to demonstrate that our method for detection and location of Space Debris (SD) in the geostationary Earth orbit (GEO) ring, based on observations at the OAN of Venezuela is of high astrometric precision. A detailed explanation of the method, its validation and first results is available in (Lacruz et al. 2017).

  17. High-precision photometry by telescope defocusing - I. The transiting planetary system WASP-5

    DEFF Research Database (Denmark)

    Southworth, J.; Hinse, T. C.; Jørgensen, U. G.

    2009-01-01

    We present high-precision photometry of two transit events of the extrasolar planetary system WASP-5, obtained with the Danish 1.54-m telescope at European Southern Obseratory La Silla. In order to minimize both random and flat-fielding errors, we defocused the telescope so its point spread...

  18. Active-passive hybrid piezoelectric actuators for high-precision hard disk drive servo systems

    Science.gov (United States)

    Chan, Kwong Wah; Liao, Wei-Hsin

    2006-03-01

    Positioning precision is crucial to today's increasingly high-speed, high-capacity, high data density, and miniaturized hard disk drives (HDDs). The demand for higher bandwidth servo systems that can quickly and precisely position the read/write head on a high track density becomes more pressing. Recently, the idea of applying dual-stage actuators to track servo systems has been studied. The push-pull piezoelectric actuated devices have been developed as micro actuators for fine and fast positioning, while the voice coil motor functions as a large but coarse seeking. However, the current dual-stage actuator design uses piezoelectric patches only without passive damping. In this paper, we propose a dual-stage servo system using enhanced active-passive hybrid piezoelectric actuators. The proposed actuators will improve the existing dual-stage actuators for higher precision and shock resistance, due to the incorporation of passive damping in the design. We aim to develop this hybrid servo system not only to increase speed of track seeking but also to improve precision of track following servos in HDDs. New piezoelectrically actuated suspensions with passive damping have been designed and fabricated. In order to evaluate positioning and track following performances for the dual-stage track servo systems, experimental efforts are carried out to implement the synthesized active-passive suspension structure with enhanced piezoelectric actuators using a composite nonlinear feedback controller.

  19. Self-tuning in master-slave synchronization of high-precision stage systems

    NARCIS (Netherlands)

    Heertjes, M.F.; Temizer, B.; Schneiders, M.G.E.

    2013-01-01

    For synchronization of high-precision stage systems, in particular the synchronization between a wafer and a reticle stage system of a wafer scanner, a master–slave controller design is presented. The design consists of a synchronization controller based on FIR filters and a data-driven self-tuning

  20. Local high precision 3D measurement based on line laser measuring instrument

    Science.gov (United States)

    Zhang, Renwei; Liu, Wei; Lu, Yongkang; Zhang, Yang; Ma, Jianwei; Jia, Zhenyuan

    2018-03-01

    In order to realize the precision machining and assembly of the parts, the geometrical dimensions of the surface of the local assembly surfaces need to be strictly guaranteed. In this paper, a local high-precision three-dimensional measurement method based on line laser measuring instrument is proposed to achieve a high degree of accuracy of the three-dimensional reconstruction of the surface. Aiming at the problem of two-dimensional line laser measuring instrument which lacks one-dimensional high-precision information, a local three-dimensional profile measuring system based on an accurate single-axis controller is proposed. First of all, a three-dimensional data compensation method based on spatial multi-angle line laser measuring instrument is proposed to achieve the high-precision measurement of the default axis. Through the pretreatment of the 3D point cloud information, the measurement points can be restored accurately. Finally, the target spherical surface is needed to make local three-dimensional scanning measurements for accuracy verification. The experimental results show that this scheme can get the local three-dimensional information of the target quickly and accurately, and achieves the purpose of gaining the information and compensating the error for laser scanner information, and improves the local measurement accuracy.