WorldWideScience

Sample records for high performance magazine

  1. BPM Magazine : biobased performance materials

    Bolck, C.H.; Bos, H.L.; Gennip, van E.; Zee, van der M.

    2011-01-01

    BPM magazine is een uitgave van het Biobased Performance Materials programma. In dit programma werken kennisinstellingen en bedrijven samen aan nieuwe biobased plastics en aan toepassingsgericht onderzoek om de eigenschappen van bestaande biokunststoffen te verbeteren.

  2. BPM Magazine : biobased performance materials

    Bolck, C.H.; Bos, H.L.; Gennip, van E.; Zee, van der M.

    2011-01-01

    BPM magazine is a publication of the Biobased Performance Materials programme. In this programme, knowledge institutions and businesses are working together on new bio-based plastics and application-focused research to improve the properties of existing bio-plastics.

  3. An Exemplary High School Literary Magazine: "Cinnabar."

    Holbrook, Hilary Taylor, Comp.

    One of a series of 20 literary magazine profiles written to help faculty advisors wishing to start or improve their publication, this profile provides information on staffing and production of "Cinnabar," the magazine published by Ward Melville High School, Setauket, New York. The introduction describes the literary magazine contest (and…

  4. An Exemplary High School Literary Magazine: "Et Cetera."

    Holbrook, Hilary Taylor, Comp.

    One of a series of 20 literary magazine profiles written to help faculty advisors wishing to start or improve their publication, this profile provides information on staffing and production of "Et Cetera," the magazine published by Clarkstown High School, New City, New York. The introduction describes the literary magazine contest (and…

  5. An Exemplary High School Literary Magazine: "The Thinking Reed."

    Holbrook, Hilary Taylor, Comp.

    One of a series of 20 literary magazine profiles written to help faculty advisors wishing to start or improve their publication, this profile provides information on staffing and production of "The Thinking Reed," the magazine published by Bethlehem Central High School, Delmar, New York. The introduction describes the literary magazine…

  6. Interpretation of highly visual 'open' advertisements in Dutch magazines

    Ketelaar, P.E.; Gisbergen, M.S.; Beentjes, J.

    2012-01-01

    In recent decades magazine advertisers have used an increasing number of highly visual open ads. Open ads do not guide consumers toward a specific interpretation as traditional ads do. An experiment was carried out to establish the effects of openness on interpretation. As expected, openness was

  7. The High Tech, Human Touch Magazine : 2014 Edition

    Boon, Mieke; de Boer, Ryanne; van den Bosch, Pieter; van Dijk, Wouter; Kikidis, Savvas; van Laar, Ruud; van Leersum, Karin; Luyt, Joris; Mpuan, Binipom; Versluijs, Wouter; Vlachos, Dimitrios; van der Vlugt, Niels

    2014-01-01

    For the course Technolab in the master program Philosophy of Science, Technology, and Society, supervised by prof.dr.ir. M. Boon, we were assigned to write a magazine that covers three different research projects within the University of Twente. In the magazine, we examined the technological,

  8. History magazines in the UK

    Haydn, Terry

    2013-01-01

    The paper explores the phenomenon of popular history magazines as a facet of public history. The UK has seen a substantial increase in the number of popular history magazines available to the public, with some magazines reaching high levels of circulation. The paper looks at the range of magazines available – from ‘heritage’ and ‘family’ history, to special interest magazines, and more ‘serious’ and scholarly history magazines. What is it that makes history magazines sell, and what influence ...

  9. A content analysis of the quantity and accuracy of dietary supplement information found in magazines with high adolescent readership.

    Shaw, Patricia; Zhang, Vivien; Metallinos-Katsaras, Elizabeth

    2009-02-01

    The objective of this study was to examine the quantity and accuracy of dietary supplement (DS) information through magazines with high adolescent readership. Eight (8) magazines (3 teen and 5 adult with high teen readership) were selected. A content analysis for DS was conducted on advertisements and editorials (i.e., articles, advice columns, and bulletins). Noted claims/cautions regarding DS were evaluated for accuracy using Medlineplus.gov and Naturaldatabase.com. Claims for dietary supplements with three or more types of ingredients and those in advertisements were not evaluated. Advertisements were evaluated with respect to size, referenced research, testimonials, and Dietary Supplement Health and Education Act of 1994 (DSHEA) warning visibility. Eighty-eight (88) issues from eight magazines yielded 238 DS references. Fifty (50) issues from five magazines contained no DS reference. Among teen magazines, seven DS references were found: five in the editorials and two in advertisements. In adult magazines, 231 DS references were found: 139 in editorials and 92 in advertisements. Of the 88 claims evaluated, 15% were accurate, 23% were inconclusive, 3% were inaccurate, 5% were partially accurate, and 55% were unsubstantiated (i.e., not listed in reference databases). Of the 94 DS evaluated in advertisements, 43% were full page or more, 79% did not have a DSHEA warning visible, 46% referred to research, and 32% used testimonials. Teen magazines contain few references to DS, none accurate. Adult magazines that have a high teen readership contain a substantial amount of DS information with questionable accuracy, raising concerns that this information may increase the chances of inappropriate DS use by adolescents, thereby increasing the potential for unexpected effects or possible harm.

  10. History in Popular Magazines: Negotiating Masculinities, the Low of the Popular and the High of History

    Bodil Axelsson

    2012-06-01

    Full Text Available This article explores how the low of the popular and the high of history intersect to negotiate masculinities in the nexus of politics and war in a Swedish history magazine. It investigates the content of the magazine’s form and argues that it produces a kaleidoscopic take on the past which begs the reader to go along with the ads to buy another book, travel to one more historical site, buy a DVD or go to the movies, to turn the page, or to buy another issue of the magazine. Two articles, biographical in their outset, provide the basis for an analysis on how masculinities are negotiated by displaying political and military leaders in contradictory ways and enabling multiple entrance points for the contemporary reader and spectator. Articles on great men produce cultural imaginaries of warlords and political leaders by drawing on layers of historically contingent ways for men to act in public and private spheres and connecting late modern visual celebrity culture to the cults of fame in earlier centuries.

  11. From Energy Audits to Home Performance: 30 Years of Articles in Home Energy Magazine

    Meier, Alan

    2014-08-11

    Home Energy Magazine has been publishing articles about residential energy efficiency for 30 years. Its goal has been to disseminate technically reliable and neutral information to the practitioners, that is, professionals in the business of home energy efficiency. The articles, editorials, letters, and advertisements are a kind of window on the evolution of energy conservation technologies, policies, and organizations. Initially, the focus was on audits and simple retrofits, such as weatherstripping and insulation. Instrumentation was sparse sometimes limited to a ruler to measure depth of attic insulation and a blower door was exotic. CFLs were heavy, awkward bulbs which might, or might not, fit in a fixture. Saving air conditioning energy was not a priority. Solar energy was only for the most adventurous. Thirty years on, the technologies and business have moved beyond just insulating attics to the larger challenge of delivering home performance and achieving zero net energy. This shift reflects the success in reducing space heating energy and the need to create a profitable industry by providing more services. The leading edge of the residential energy services market is becoming much more sophisticated, offering both efficiency and solar systems. The challenge is to continue providing relevant and reliable information in a transformed industry and a revolutionized media landscape.

  12. ASK Magazine. No. 12

    Laufer, Alexander (Editor); Post, Todd (Editor); Brady, Jody Lannen (Editor)

    2003-01-01

    Welcome to the Academy of Program and Project Leadership (APPL) and ASK Magazine. APPL helps NASA managers and project teams accomplish today's missions and meet tomorrow's challenges by providing performance enhancement services and tools, supporting career development programs, sponsoring knowledge sharing events and publications, and creating opportunities for project management collaboration with universities, professional associations, industry partners and other government agencies. ASK Magazine grew out of APPL's Knowledge Sharing Initiative. The stories that appear in ASK are written by the 'best of the best' project managers, primarily from NASA, but also from other government agencies and industry. These stories contain genuine nuggets of knowledge and wisdom that are transferable across projects. Who better than a project manager to help another project manager address a critical issue on a project? Big projects, smaLl projects-they're ali here in ASK. Stories in this issue include: Earthly Considerations on Mars, Getting Politically Active, Stumping for the Project, Grins & Giggles: The Launch Pad to High Performance, Transfer Wisdom Workshops: Coming to a NASA Center Near You, Project Management: The Television Show, Lessons Learned Again and Again and Again, Implementation Reviews, ASK Talks with Dr. Michael Hecht, and What Is This Fourth Dimension?.

  13. Suame Magazine

    Eskemose Andersen, Jørgen

    2007-01-01

    I foråret 2006 gennemførte en gruppe studerende fra Kunstakademiets Arkitektskole, i samarbejde med universitetet i Kumasi, studier i Suame Magazine, Vestafrikas største område inden for lettere jern- og metalarbejde - især bilværksteder. Boligområderne omkring Suame Magazine er i en sådan vækst...

  14. Magazine Development: Creative Arts Magazines Can Take on More Creativity through Staff Innovation, Desktop Publishing.

    Cutsinger, John

    1988-01-01

    Explains how a high school literary magazine staff accessed the journalism department's Apple Macintosh computers to typeset its publication. Provides examples of magazine layouts designed partially or completely by "Pagemaker" software on a Macintosh. (MM)

  15. 46 CFR 78.47-70 - Portable magazine chests.

    2010-10-01

    ... 46 Shipping 3 2010-10-01 2010-10-01 false Portable magazine chests. 78.47-70 Section 78.47-70... Fire and Emergency Equipment, Etc. § 78.47-70 Portable magazine chests. (a) Portable magazine chest shall be marked in letters of at least 3 inches high “PORTABLE MAGAZINE CHEST—FLAMMABLE—KEEP LIGHTS AND...

  16. 46 CFR 97.37-47 - Portable magazine chests.

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Portable magazine chests. 97.37-47 Section 97.37-47... OPERATIONS Markings for Fire and Emergency Equipment, Etc. § 97.37-47 Portable magazine chests. (a) Portable magazine chests shall be marked in letters at least 3 inches high: “PORTABLE MAGAZINE CHEST—FLAMMABLE—KEEP...

  17. 46 CFR 169.743 - Portable magazine chests.

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Portable magazine chests. 169.743 Section 169.743... Vessel Control, Miscellaneous Systems, and Equipment Markings § 169.743 Portable magazine chests. Portable magazine chests must be marked in letters at least 3 inches high: “PORTABLE MAGAZINE CHEST...

  18. 46 CFR 196.37-47 - Portable magazine chests.

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Portable magazine chests. 196.37-47 Section 196.37-47... Markings for Fire and Emergency Equipment, etc. § 196.37-47 Portable magazine chests. (a) Portable magazine chests shall be marked in letters at least 3 inches high: PORTABLE MAGAZINE CHEST — FLAMMABLE — KEEP...

  19. Best of 2008: Magazines

    Black, Steve

    2009-01-01

    This article presents the 10 best new magazines of 2008. They are: (1) BBC Knowledge; (2) Bible Study Magazine; (3) Culture: The Word on Cheese; (4) Food Network Magazine; (5) Lapham's Quarterly; (6) Miller-McCune; (7) NCAA Champion; (8) Science Illustrated; (9) Strategy; and (10) World Affairs. These magazines have in common the potential to…

  20. Best Magazines of 2007

    Black, Steve

    2008-01-01

    Rumors of the death of the magazine are greatly exaggerated. Efforts by some innovative publishers suggest that rather than killing magazines, the Internet may just reinvigorate the medium. As each magazine seeks the ideal relationship of print to online to develop its brand, nearly every magazine has a web site with at least subscribing…

  1. High theory/mass markets: Newsweek magazine and the circuits of medical culture.

    Lewis, Bradley

    2007-01-01

    Medicine is driven by much more than science and reason (ethics); it is also driven by the circuits of culture within which it operates. This article examines how postmodern theory deconstructs standard ideals of science and reason and allows medical humanities scholars to better contextualize the world of medicine. As such, postmodern theory provides an invaluable tool for understanding the circuits of popular culture and medicine's place within these circuits. Using a recent issue of Newsweek magazine devoted to health and technology to illustrate the main points, this essay argues that contemporary popular influences on medicine are deeply problematic, and that through an appreciation of the dynamics of culture, medical humanities scholars can join the struggle over medical culture. This perspective allows medical humanities to make important contributions toward alternative circuits of medical representation, consumption, and identification.

  2. Energy Magazine

    1999-01-01

    The present issue of the Energy Magazine is including a summary of the six years of implementation of the energy and sustainable development project, which also includes the participation of the Economic Commission for Latin America and the Caribbean (ECLAC). The substantially parameters and indicators defined by this project have been applied in case studies for Bolivia, Brazil, Colombia, Chile and El Salvador and have yielded sound results. A few pages are dedicated to highlight the preliminary results stemming from the initiative aimed at promoting hydropower projects that OLADE started with the Government of Quebec last year. The main themes included are: Energy efficiency in OLADE-GTZ cooperation. Liberalization and energy development, Energy statistics

  3. Study on the signatures for a magazine

    Chai, Jan Bom; Kim, Tae Hwan; Park, Sung Keun

    2004-01-01

    In this paper, diagnostic algorithms are developed to be utilized to monitor the condition of and to diagnose defects in the magazine of a fuelling machine installed in CANDU plants. The magazine plays a role in storing fuels, plugs and tools. Since the magazine operates in the high radiation area, it is impossible to give direct access to it for measuring the signals. Therefore, inlet and outlet pressures of a hydraulic motor, which can be acquired remotely, were selected as the measuring variables. The measured signals are further processed to extract the diagnostic signatures. They were examined and validated in the various experiments with the magazine mock-up

  4. Literary Magazines: To Censor or Not?

    Mossman, Robert C.

    2007-01-01

    High school teacher Robert C. Mossman asserts that literary magazines reflect and elevate school communities' values. As adviser of his school literary magazine, Mossman encourages students to uphold certain standards for decency, while helping students learn to distinguish between original writing that is specific and thoughtful and writing that…

  5. 27 CFR 555.206 - Location of magazines.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Location of magazines. 555... EXPLOSIVES, DEPARTMENT OF JUSTICE EXPLOSIVES COMMERCE IN EXPLOSIVES Storage § 555.206 Location of magazines. (a) Outdoor magazines in which high explosives are stored must be located no closer to inhabited...

  6. From the lab - Predicting Autism in High-Risk Infants | NIH MedlinePlus the Magazine

    ... High-Risk Infants Follow us Photo: iStock Predicting Autism in High-Risk Infants AN NIH-SUPPORTED STUDY ... high-risk, 6-month-old infants will develop autism spectrum disorder by age 2. Such a tool ...

  7. Children´s magazines

    BJALKOVOVÁ, Nela

    2014-01-01

    Thesis deals with the study of children's magazines with a focus on students first primary school. The work is focused on the use of language, graphic design, the aim and content of magazines for this age group. Furthermore, there also addresses the issue of online magazines compared to arbitrarily marketable magazines. The theoretical part focuses on the individual child reading a history of the magazine. The thesis is conducted to map the problems of children's magazines with a focus on pra...

  8. Esprit: A Humanities Magazine.

    Parker, Donald G.; Capella, Barry John

    In March 1984, the first issue of "Esprit," a semi-annual humanities magazine for the 56 two-year colleges in New York State, was published. The magazine seeks to confront the apparent decline of student interest in the humanities, community doubts about the relevance of the humanities, and the seeming indifference to the special truths…

  9. Best of Magazines 2009

    Black, Steve

    2010-01-01

    Magazine publishers weathered the difficult recession year of 2009 with admirable resilience. Although several magazines failed and many saw reductions in advertising revenue, a number of new publications have been launched as industry professionals continue to demonstrate their ability to adapt to new technologies and difficult business…

  10. Magazine Writing Today.

    Kelley, Jerome E.

    Intended as a practical guide for persons interested in the field of free lance writing, this book provides information on the following topics: the individual's response to the magazine publishing market; magazines and the types of articles that are marketable; methods for locating story material; ways of questioning and interpreting an editor's…

  11. High performance homes

    Beim, Anne; Vibæk, Kasper Sánchez

    2014-01-01

    Can prefabrication contribute to the development of high performance homes? To answer this question, this chapter defines high performance in more broadly inclusive terms, acknowledging the technical, architectural, social and economic conditions under which energy consumption and production occur....... Consideration of all these factors is a precondition for a truly integrated practice and as this chapter demonstrates, innovative project delivery methods founded on the manufacturing of prefabricated buildings contribute to the production of high performance homes that are cost effective to construct, energy...

  12. High Performance Marine Vessels

    Yun, Liang

    2012-01-01

    High Performance Marine Vessels (HPMVs) range from the Fast Ferries to the latest high speed Navy Craft, including competition power boats and hydroplanes, hydrofoils, hovercraft, catamarans and other multi-hull craft. High Performance Marine Vessels covers the main concepts of HPMVs and discusses historical background, design features, services that have been successful and not so successful, and some sample data of the range of HPMVs to date. Included is a comparison of all HPMVs craft and the differences between them and descriptions of performance (hydrodynamics and aerodynamics). Readers will find a comprehensive overview of the design, development and building of HPMVs. In summary, this book: Focuses on technology at the aero-marine interface Covers the full range of high performance marine vessel concepts Explains the historical development of various HPMVs Discusses ferries, racing and pleasure craft, as well as utility and military missions High Performance Marine Vessels is an ideal book for student...

  13. High performance systems

    Vigil, M.B. [comp.

    1995-03-01

    This document provides a written compilation of the presentations and viewgraphs from the 1994 Conference on High Speed Computing given at the High Speed Computing Conference, {open_quotes}High Performance Systems,{close_quotes} held at Gleneden Beach, Oregon, on April 18 through 21, 1994.

  14. 26 CFR 31.3306(c)(15)-1 - Services in delivery or distribution of newspapers, shopping news, or magazines.

    2010-04-01

    ... newspapers, shopping news, or magazines. 31.3306(c)(15)-1 Section 31.3306(c)(15)-1 Internal Revenue INTERNAL..., shopping news, or magazines. (a) Services of individuals under age 18. Services performed by an employee... magazines to ultimate consumers under an arrangement under which the newspapers or magazines are to be sold...

  15. Responsive design high performance

    Els, Dewald

    2015-01-01

    This book is ideal for developers who have experience in developing websites or possess minor knowledge of how responsive websites work. No experience of high-level website development or performance tweaking is required.

  16. High Performance Macromolecular Material

    Forest, M

    2002-01-01

    .... In essence, most commercial high-performance polymers are processed through fiber spinning, following Nature and spider silk, which is still pound-for-pound the toughest liquid crystalline polymer...

  17. TEACHING READING USING MAGAZINE

    Henny Uswatun Hasanah

    2013-11-01

    Full Text Available Teaching is a process of communication. It has to be created through the way of teaching and exchanging the message or information by every teacher and student. The message can be knowledge, skills, ideas, experiences, and many others. Through the process of communication, the people can receive the message or information. To avoid misunderstanding in the process of communication, media are needed in the process of teaching. Magazine can be other alternative as reading material in the classroom. Magazine as reading material has appeal for the students. To make the students get information from magazine, the teacher can ask the students to observe table of content and giving the students training to use it. Like, what is done on text book. Distinguishing informative reading material with fictive reading, important to know students in reading magazine. Like analyzing advertisements to detect propaganda.

  18. Marketing pharmaceutical drugs to women in magazines: a content analysis.

    Sokol, Jennifer; Wackowski, Olivia; Lewis, M J

    2010-01-01

    To examine the prevalence and content of pharmaceutical ads in demographically different women's magazines. A content analysis was conducted using one year's worth of 5 different women's magazines of varying age demographics. Magazines differed in the proportion of drug ads for different health conditions (eg, cardiovascular) and target audience by age demographic. Use of persuasive elements (types of appeals, evidence) varied by condition promoted (eg, mental-health drug ads more frequently used emotional appeals). Ads placed greater emphasis on direction to industry information resources than on physician discussions. Prevalence of pharmaceutical advertising in women's magazines is high; continued surveillance is recommended.

  19. Clojure high performance programming

    Kumar, Shantanu

    2013-01-01

    This is a short, practical guide that will teach you everything you need to know to start writing high performance Clojure code.This book is ideal for intermediate Clojure developers who are looking to get a good grip on how to achieve optimum performance. You should already have some experience with Clojure and it would help if you already know a little bit of Java. Knowledge of performance analysis and engineering is not required. For hands-on practice, you should have access to Clojure REPL with Leiningen.

  20. High Performance Concrete

    Traian Oneţ

    2009-01-01

    Full Text Available The paper presents the last studies and researches accomplished in Cluj-Napoca related to high performance concrete, high strength concrete and self compacting concrete. The purpose of this paper is to raid upon the advantages and inconveniences when a particular concrete type is used. Two concrete recipes are presented, namely for the concrete used in rigid pavement for roads and another one for self-compacting concrete.

  1. High performance polymeric foams

    Gargiulo, M.; Sorrentino, L.; Iannace, S.

    2008-01-01

    The aim of this work was to investigate the foamability of high-performance polymers (polyethersulfone, polyphenylsulfone, polyetherimide and polyethylenenaphtalate). Two different methods have been used to prepare the foam samples: high temperature expansion and two-stage batch process. The effects of processing parameters (saturation time and pressure, foaming temperature) on the densities and microcellular structures of these foams were analyzed by using scanning electron microscopy

  2. Evaluating and Selecting Online Magazines for Children. ERIC Digest.

    Lu, Mei-Yu

    This Digest provides an overview of children's online magazines, also known as e-zines. It begins with a brief review of factors that contribute to the popularity of these publications, followed by a list of criteria for selecting high-quality online magazines for children. Samples of high-quality children's e-zines are also included in this…

  3. High performance conductometry

    Saha, B.

    2000-01-01

    Inexpensive but high performance systems have emerged progressively for basic and applied measurements in physical and analytical chemistry on one hand, and for on-line monitoring and leak detection in plants and facilities on the other. Salient features of the developments will be presented with specific examples

  4. Danish High Performance Concretes

    Nielsen, M. P.; Christoffersen, J.; Frederiksen, J.

    1994-01-01

    In this paper the main results obtained in the research program High Performance Concretes in the 90's are presented. This program was financed by the Danish government and was carried out in cooperation between The Technical University of Denmark, several private companies, and Aalborg University...... concretes, workability, ductility, and confinement problems....

  5. High performance homes

    Beim, Anne; Vibæk, Kasper Sánchez

    2014-01-01

    . Consideration of all these factors is a precondition for a truly integrated practice and as this chapter demonstrates, innovative project delivery methods founded on the manufacturing of prefabricated buildings contribute to the production of high performance homes that are cost effective to construct, energy...

  6. 30 CFR 75.1313 - Explosives and detonators outside of magazines.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives and detonators outside of magazines... § 75.1313 Explosives and detonators outside of magazines. (a) The quantity of explosives outside a magazine for use in a working section or other area where blasting is to be performed shall— (1) Not exceed...

  7. High-Performance Networking

    CERN. Geneva

    2003-01-01

    The series will start with an historical introduction about what people saw as high performance message communication in their time and how that developed to the now to day known "standard computer network communication". It will be followed by a far more technical part that uses the High Performance Computer Network standards of the 90's, with 1 Gbit/sec systems as introduction for an in depth explanation of the three new 10 Gbit/s network and interconnect technology standards that exist already or emerge. If necessary for a good understanding some sidesteps will be included to explain important protocols as well as some necessary details of concerned Wide Area Network (WAN) standards details including some basics of wavelength multiplexing (DWDM). Some remarks will be made concerning the rapid expanding applications of networked storage.

  8. The new Chalk River AMS ion source, sample changer and external sample magazine

    Koslowsky, V.T.; Bray, N.; Imahori, Y.; Andrews, H.R.; Davies, W.G.

    1997-01-01

    A new sample magazine, sample changer and ion source have been developed and are in routine use at Chalk River. The system features a readily accessible 40-sample magazine at ground potential that is external to the ion source and high-voltage cage. The samples are held in an inert atmosphere and can be individually examined or removed; they can be exchanged en masse as a complete magazine concurrent with an AMS measurement. On-line sample changing is done with a pneumatic rabbit transfer system employing two stages of differential pumping. At Chalk River this is routinely performed across a 200 kV potential. Sample positioning is precise, and hundreds of 36 Cl and 129 I samples have been measured over a period of several days without interruption or alteration of ion source operating conditions. (author)

  9. ThyssenKrupp magazine - Environment; ThyssenKrupp Magazin - Umwelt

    NONE

    2008-01-15

    The magazine covers the following topics: The view of E.-U. Weizsaecker concerning environment; a discussion on climatic change and changes of consciousness; the right measures against environmental problems; on happiness of mankind; the CO{sub 2} problem; environmentally friendly knowledge transfer; sustainable investment; cultural translation; wind power; mobility; lifestyle changes due to the demographic development; several generation under one roof; natural catastrophies; adaptation strategies in the context of natural catastrophies; mankind-induced changes; burnout - a symptom of the high perfomance society; the planet of nomads.

  10. High performance data transfer

    Cottrell, R.; Fang, C.; Hanushevsky, A.; Kreuger, W.; Yang, W.

    2017-10-01

    The exponentially increasing need for high speed data transfer is driven by big data, and cloud computing together with the needs of data intensive science, High Performance Computing (HPC), defense, the oil and gas industry etc. We report on the Zettar ZX software. This has been developed since 2013 to meet these growing needs by providing high performance data transfer and encryption in a scalable, balanced, easy to deploy and use way while minimizing power and space utilization. In collaboration with several commercial vendors, Proofs of Concept (PoC) consisting of clusters have been put together using off-the- shelf components to test the ZX scalability and ability to balance services using multiple cores, and links. The PoCs are based on SSD flash storage that is managed by a parallel file system. Each cluster occupies 4 rack units. Using the PoCs, between clusters we have achieved almost 200Gbps memory to memory over two 100Gbps links, and 70Gbps parallel file to parallel file with encryption over a 5000 mile 100Gbps link.

  11. Creating Pupils' Internet Magazine

    Bognar, Branko; Šimic, Vesna

    2014-01-01

    This article presents an action research, which aimed to improve pupils' literary creativity and enable them to use computers connected to the internet. The study was conducted in a small district village school in Croatia. Creating a pupils' internet magazine appeared to be an excellent way for achieving the educational aims of almost all…

  12. Best Magazines of 2006

    Couch, Clayton A.

    2007-01-01

    Deeming 2006 disappointing for the magazine industry may be an exaggeration. Nevertheless, publishers have undoubtedly seen better years. Advertising revenue declined for a number of popular print titles, with publications such as "Field & Stream," "Outdoor Life," "Vanity Fair," "The New Yorker," "Skiing," and "Jane" shedding significant numbers…

  13. High performance sapphire windows

    Bates, Stephen C.; Liou, Larry

    1993-02-01

    High-quality, wide-aperture optical access is usually required for the advanced laser diagnostics that can now make a wide variety of non-intrusive measurements of combustion processes. Specially processed and mounted sapphire windows are proposed to provide this optical access to extreme environment. Through surface treatments and proper thermal stress design, single crystal sapphire can be a mechanically equivalent replacement for high strength steel. A prototype sapphire window and mounting system have been developed in a successful NASA SBIR Phase 1 project. A large and reliable increase in sapphire design strength (as much as 10x) has been achieved, and the initial specifications necessary for these gains have been defined. Failure testing of small windows has conclusively demonstrated the increased sapphire strength, indicating that a nearly flawless surface polish is the primary cause of strengthening, while an unusual mounting arrangement also significantly contributes to a larger effective strength. Phase 2 work will complete specification and demonstration of these windows, and will fabricate a set for use at NASA. The enhanced capabilities of these high performance sapphire windows will lead to many diagnostic capabilities not previously possible, as well as new applications for sapphire.

  14. A Bibliography for the Study of Magazines.

    Schacht, J. H.

    This annotated bibliography contains a list of readings compiled for a course in magazine editing at the University of Illinois. This bibliography includes materials on the history of magazines, advertising in magazines, readership and audience studies, analyses of magazine content, information on magazine circulation, editorial research and its…

  15. R high performance programming

    Lim, Aloysius

    2015-01-01

    This book is for programmers and developers who want to improve the performance of their R programs by making them run faster with large data sets or who are trying to solve a pesky performance problem.

  16. Push piece for spent fuel elements magazine

    Griveau, R.; Kerlau, D.; Tucoulat, D.; Colas, J.; Pellier, R.

    1989-01-01

    The push piece permits the displacement of little section elements in a magazine of high section. At the end of cut, the push piece leans its flank against an auxiliary blank holder and the element is pushed by a paddle, the push piece being immobilized [fr

  17. High performance work practices, innovation and performance

    Jørgensen, Frances; Newton, Cameron; Johnston, Kim

    2013-01-01

    Research spanning nearly 20 years has provided considerable empirical evidence for relationships between High Performance Work Practices (HPWPs) and various measures of performance including increased productivity, improved customer service, and reduced turnover. What stands out from......, and Africa to examine these various questions relating to the HPWP-innovation-performance relationship. Each paper discusses a practice that has been identified in HPWP literature and potential variables that can facilitate or hinder the effects of these practices of innovation- and performance...

  18. Functional features of travel magazines: retrospective view

    Gromova Lyudmila Petrovna

    2015-09-01

    Full Text Available The article considers the features of the functional purpose of travel magazines (travelogue, their genesis, evolution, traits, depending on the socio-political context and, accordingly, requests from the readership. The progenitor of the travel magazines in Russia was journey literature that took root in the genre of travel notes. The forerunner of today’s travelogues can be considered «Nikita Akinfievich Demidov’s travel magazine» (1786, presenting daily travel notes, mostly laconic, sometimes deployed to fascinating travel notes Magazines at different times performed cultural and educational, didactic, aesthetic and ideological functions, immersing the reader in the living conditions of the countries and continents, showing the diversity of the world. Today, traveling is seen as a multifaceted activity that is due to the result of freedom of movement, numerous hiking trails, access to information in the network space takes new character. Accordingly, the media market is a process of qualitative and quantitative changes. There is a growing number of distribution channels, many of which are convergent evolution. The transformation of the old forms is determined by market demand. These processes are inevitably reflected in the dominance of certain functions of the travelogue. However, their essential purpose remains the same: to inform, educate and entertain.

  19. Python high performance programming

    Lanaro, Gabriele

    2013-01-01

    An exciting, easy-to-follow guide illustrating the techniques to boost the performance of Python code, and their applications with plenty of hands-on examples.If you are a programmer who likes the power and simplicity of Python and would like to use this language for performance-critical applications, this book is ideal for you. All that is required is a basic knowledge of the Python programming language. The book will cover basic and advanced topics so will be great for you whether you are a new or a seasoned Python developer.

  20. High performance germanium MOSFETs

    Saraswat, Krishna [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States)]. E-mail: saraswat@stanford.edu; Chui, Chi On [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Krishnamohan, Tejas [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Kim, Donghyun [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Nayfeh, Ammar [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States); Pethe, Abhijit [Department of Electrical Engineering, Stanford University, Stanford, CA 94305 (United States)

    2006-12-15

    Ge is a very promising material as future channel materials for nanoscale MOSFETs due to its high mobility and thus a higher source injection velocity, which translates into higher drive current and smaller gate delay. However, for Ge to become main-stream, surface passivation and heterogeneous integration of crystalline Ge layers on Si must be achieved. We have demonstrated growth of fully relaxed smooth single crystal Ge layers on Si using a novel multi-step growth and hydrogen anneal process without any graded buffer SiGe layer. Surface passivation of Ge has been achieved with its native oxynitride (GeO {sub x}N {sub y} ) and high-permittivity (high-k) metal oxides of Al, Zr and Hf. High mobility MOSFETs have been demonstrated in bulk Ge with high-k gate dielectrics and metal gates. However, due to their smaller bandgap and higher dielectric constant, most high mobility materials suffer from large band-to-band tunneling (BTBT) leakage currents and worse short channel effects. We present novel, Si and Ge based heterostructure MOSFETs, which can significantly reduce the BTBT leakage currents while retaining high channel mobility, making them suitable for scaling into the sub-15 nm regime. Through full band Monte-Carlo, Poisson-Schrodinger and detailed BTBT simulations we show a dramatic reduction in BTBT and excellent electrostatic control of the channel, while maintaining very high drive currents in these highly scaled heterostructure DGFETs. Heterostructure MOSFETs with varying strained-Ge or SiGe thickness, Si cap thickness and Ge percentage were fabricated on bulk Si and SOI substrates. The ultra-thin ({approx}2 nm) strained-Ge channel heterostructure MOSFETs exhibited >4x mobility enhancements over bulk Si devices and >10x BTBT reduction over surface channel strained SiGe devices.

  1. High performance germanium MOSFETs

    Saraswat, Krishna; Chui, Chi On; Krishnamohan, Tejas; Kim, Donghyun; Nayfeh, Ammar; Pethe, Abhijit

    2006-01-01

    Ge is a very promising material as future channel materials for nanoscale MOSFETs due to its high mobility and thus a higher source injection velocity, which translates into higher drive current and smaller gate delay. However, for Ge to become main-stream, surface passivation and heterogeneous integration of crystalline Ge layers on Si must be achieved. We have demonstrated growth of fully relaxed smooth single crystal Ge layers on Si using a novel multi-step growth and hydrogen anneal process without any graded buffer SiGe layer. Surface passivation of Ge has been achieved with its native oxynitride (GeO x N y ) and high-permittivity (high-k) metal oxides of Al, Zr and Hf. High mobility MOSFETs have been demonstrated in bulk Ge with high-k gate dielectrics and metal gates. However, due to their smaller bandgap and higher dielectric constant, most high mobility materials suffer from large band-to-band tunneling (BTBT) leakage currents and worse short channel effects. We present novel, Si and Ge based heterostructure MOSFETs, which can significantly reduce the BTBT leakage currents while retaining high channel mobility, making them suitable for scaling into the sub-15 nm regime. Through full band Monte-Carlo, Poisson-Schrodinger and detailed BTBT simulations we show a dramatic reduction in BTBT and excellent electrostatic control of the channel, while maintaining very high drive currents in these highly scaled heterostructure DGFETs. Heterostructure MOSFETs with varying strained-Ge or SiGe thickness, Si cap thickness and Ge percentage were fabricated on bulk Si and SOI substrates. The ultra-thin (∼2 nm) strained-Ge channel heterostructure MOSFETs exhibited >4x mobility enhancements over bulk Si devices and >10x BTBT reduction over surface channel strained SiGe devices

  2. High Performance Computing Multicast

    2012-02-01

    A History of the Virtual Synchrony Replication Model,” in Replication: Theory and Practice, Charron-Bost, B., Pedone, F., and Schiper, A. (Eds...Performance Computing IP / IPv4 Internet Protocol (version 4.0) IPMC Internet Protocol MultiCast LAN Local Area Network MCMD Dr. Multicast MPI

  3. NGINX high performance

    Sharma, Rahul

    2015-01-01

    System administrators, developers, and engineers looking for ways to achieve maximum performance from NGINX will find this book beneficial. If you are looking for solutions such as how to handle more users from the same system or load your website pages faster, then this is the book for you.

  4. Magazine for handling stripping foils in a particle accelerator

    Gorka, A.J. Jr.

    1975-01-01

    Thin foils for stripping a particle beam are stored in a magazine that is operable remotely to display an individual foil, release it when it is spent, and repeat this process. The magazine is operable in the high-vacuum, high-radiation environment in the interior of a particle accelerator, and it uses the magnetic field of the accelerator to operate the display and dropping mechanism. (U.S.)

  5. Children's Magazines: Something for Everyone.

    Kuersten, Joan

    1983-01-01

    A selected list of children's magazines is given, along with brief descriptions of their contents and ordering information. The magazines are on themes such as history, classical literature, science, nature and natural history, health, music, black children, and classroom learning activities. (PP)

  6. Brain&Life: The Magazine

    ... Free Print Subscription Sign-up for eNewsletter The Magazine Current Issue Read the April/May 2018 Issue. ... Extras, and More. En Español Primavera 2018. The Magazine Current Issue Issue Archive Online Only En Español ...

  7. Health Versus Appearance Versus Body Competence: A Content Analysis Investigating Frames of Health Advice in Women's Health Magazines.

    Aubrey, Jennifer Stevens; Hahn, Rachel

    2016-05-01

    The present study investigated the extent to which women's health magazines advise readers to adopt healthy behaviors in order to look good (appearance frame), in order to feel good (health frame), or in order to perform better (body competence frame). A content analysis of 5 years of the 6 highest circulating U.S. women's health magazines revealed a higher frequency of health frames (32.6%) than appearance frames (24.8%) overall, but when beauty/health hybrid magazines (i.e., Shape and Self) were examined separately, appearance frames (32.8%) outnumbered health frames (26.5%). Compared to appearance and health frames, body competence frames were underrepresented (13.3% in the full sample). The visual sexual objectification of female models in women's health magazines was also investigated. Appearance-framed articles (43.2%) were significantly more likely to visually depict women with a high degree of skin exposure than health-framed articles (17.4%), and appearance-framed articles (34.8%) were more likely to focus on individual body parts than health-framed articles (21.3%). In addition, despite the magazines' editorial focus on health, the most frequent category of products advertised was appearance-enhancing products. Results are discussed in light of self-determination theory (Deci & Ryan, 1985) and objectification theory (Fredrickson & Roberts, 1997).

  8. High performance proton accelerators

    Favale, A.J.

    1989-01-01

    In concert with this theme this paper briefly outlines how Grumman, over the past 4 years, has evolved from a company that designed and fabricated a Radio Frequency Quadrupole (RFQ) accelerator from the Los Alamos National Laboratory (LANL) physics and specifications to a company who, as prime contractor, is designing, fabricating, assembling and commissioning the US Army Strategic Defense Commands (USA SDC) Continuous Wave Deuterium Demonstrator (CWDD) accelerator as a turn-key operation. In the case of the RFQ, LANL scientists performed the physics analysis, established the specifications supported Grumman on the mechanical design, conducted the RFQ tuning and tested the RFQ at their laboratory. For the CWDD Program Grumman has the responsibility for the physics and engineering designs, assembly, testing and commissioning albeit with the support of consultants from LANL, Lawrence Berkeley Laboratory (LBL) and Brookhaven National laboratory. In addition, Culham Laboratory and LANL are team members on CWDD. LANL scientists have reviewed the physics design as well as a USA SDC review board. 9 figs

  9. Two tests demonstrating the effects of small blasts inside explosives storage magazines

    Ollerenshaw, J.

    2010-02-15

    This paper described 2 tests conducted to determine the effects of detonating small quantities of explosives in a storage magazine. The aim of the study was to determine the correct measures for reducing the potential for injury and damage in areas surrounding storage magazines. The study involved the detonation of 5 kg and 20 kg of pentolite in type 2 and type 4 magazines. A wall of heavy concrete blocks was erected around 2 sides of the magazine in each of the tests. Surveys of the test sites were performed after each trial, and the results of the tests were documented with video recordings and photographs. Maps of major metal fragments were prepared, and free-field pressure transducers and high speed video data were used to measure initial fragment velocities. The study showed that while the walls collapsed in both trials, they prevented heavy metal fragments from escaping the blast site. Results of the tests will be used to educate members of the explosives industry in Canada and to ensure that safety distances for explosives storage are maintained. 5 refs., 8 tabs., 56 figs.

  10. Food references and marketing to children in Australian magazines: a content analysis.

    Kelly, Bridget; Chapman, Kathy

    2007-12-01

    The aim of this study was to assess the content and extent of food references and marketing within popular children's magazines in Australia. Sixteen popular Australian children's magazines were selected, as determined by readership and circulation data. Back copies of each magazine were purchased for publications released between January and December 2006 (n = 76). Each magazine was assessed for food references on the basis of 23 food categories and 7 food-referencing types and as either branded or non-branded food references. There were a high number of overall food references within the children's magazines, with the majority of these being for unhealthy food products (63.7% unhealthy versus 36.3% healthy foods, p marketing, were ice cream and iced confection (85.6% branded references), fast food restaurant meals (83.4%), high-sugar drinks (78.9%) and snack foods (73.4%). Of all magazines, those targeting males and children aged 7-12 years had the highest proportion of unhealthy food references (78.1 and 69.8% unhealthy food references, respectively). Food references within children's magazines are common and skewed towards unhealthy foods. Children's high magazine readership rates and a lack of advertising and product placement regulations for magazines in Australia make this media an attractive target for food marketers. The timely establishment of food marketing regulations within magazines are recommended to prevent further expansion of food marketing in this area.

  11. 30 CFR 57.6132 - Magazine requirements.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Magazine requirements. 57.6132 Section 57.6132...-Surface Only § 57.6132 Magazine requirements. (a) Magazines shall be— (1) Structurally sound; (2... magazine; (6) Posted with the appropriate United States Department of Transportation placards or other...

  12. 30 CFR 56.6132 - Magazine requirements.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Magazine requirements. 56.6132 Section 56.6132....6132 Magazine requirements. (a) Magazines shall be— (1) Structurally sound; (2) Noncombustible or the... the inside; (5) Ventilated to control dampness and excessive heating within the magazine; (6) Posted...

  13. 30 CFR 77.1301 - Explosives; magazines.

    2010-07-01

    ... 30 Mineral Resources 1 2010-07-01 2010-07-01 false Explosives; magazines. 77.1301 Section 77.1301... and Blasting § 77.1301 Explosives; magazines. (a) Detonators and explosives other than blasting agents shall be stored in magazines. (b) Detonators shall not be stored in the same magazine with explosives...

  14. LIMA BARRETO'S MARGINÁLIA: THE MAGAZINE WRITER'S DREAM

    FELIPE BOTELHO CORRÊA

    Full Text Available This article analyses Lima Barreto's lifelong relationship with magazines not only as a contributor, but also as a founder, editor, and even collector of these ephemeral publications. His debut in 1902 as a writer for his college magazine, A Lanterna, and his death in 1922 while contributing to A.B.C. and Careta, can be considered symbolic events that epitomize the birth and death of a career wholeheartedly dedicated to this métier. A central argument is that it is highly significant that Barreto published his works in magazines more often than in newspapers. To him, magazines were stores of rhetorical weapons, artefacts that could confront the intellectual values established and concentrated in Rio de Janeiro.

  15. Newspapers and Magazines

    Chandra, Ambarish; Kaiser, Ulrich

    2016-01-01

    the research on advertising in print media, particularly the question of whether readers value print advertising as a good or a bad thing. We summarize the research on antitrust-related issues in newspaper markets, including mergers, joint operating agreements, and vertical price restrictions. We then review......We review the Economics literature on newspapers and magazines. Our emphasis is on the newspaper industry, especially in the United States, given that this has been the focus of existing research. We first discuss the structure of print media markets, describing the rise in the number of daily...... newspapers during the early twentieth century and then the steady decline since the 1940s. We discuss print media in the context of two-sided markets, noting that empirical papers on the newspaper industry were some of the earliest studies to use the techniques of two-sided market estimation. We then review...

  16. NLM MedlinePlus Magazine Team | NIH MedlinePlus the Magazine

    ... Home Current issue contents Magazine Team Follow us Magazine Team National Library of Medicine at the National ... MLS, MA TREASURER Dennis Cryer, MD NIH MedlinePlus magazine is published by Friends of the NLM in ...

  17. Automatic design of magazine covers

    Jahanian, Ali; Liu, Jerry; Tretter, Daniel R.; Lin, Qian; Damera-Venkata, Niranjan; O'Brien-Strain, Eamonn; Lee, Seungyon; Fan, Jian; Allebach, Jan P.

    2012-03-01

    In this paper, we propose a system for automatic design of magazine covers that quantifies a number of concepts from art and aesthetics. Our solution to automatic design of this type of media has been shaped by input from professional designers, magazine art directors and editorial boards, and journalists. Consequently, a number of principles in design and rules in designing magazine covers are delineated. Several techniques are derived and employed in order to quantify and implement these principles and rules in the format of a software framework. At this stage, our framework divides the task of design into three main modules: layout of magazine cover elements, choice of color for masthead and cover lines, and typography of cover lines. Feedback from professional designers on our designs suggests that our results are congruent with their intuition.

  18. Are all models created equal? A content analysis of women in advertisements of fitness versus fashion magazines.

    Wasylkiw, L; Emms, A A; Meuse, R; Poirier, K F

    2009-03-01

    The current study is a content analysis of women appearing in advertisements in two types of magazines: fitness/health versus fashion/beauty chosen because of their large and predominantly female readerships. Women appearing in advertisements of the June 2007 issue of five fitness/health magazines were compared to women appearing in advertisements of the June 2007 issue of five beauty/fashion magazines. Female models appearing in advertisements of both types of magazines were primarily young, thin Caucasians; however, images of models were more likely to emphasize appearance over performance when they appeared in fashion magazines. This difference in emphasis has implications for future research.

  19. High Performance Networks for High Impact Science

    Scott, Mary A.; Bair, Raymond A.

    2003-02-13

    This workshop was the first major activity in developing a strategic plan for high-performance networking in the Office of Science. Held August 13 through 15, 2002, it brought together a selection of end users, especially representing the emerging, high-visibility initiatives, and network visionaries to identify opportunities and begin defining the path forward.

  20. 26 CFR 31.3401(a)(10)-1 - Remuneration for services in delivery or distribution of newspapers, shopping news, or magazines.

    2010-04-01

    ... distribution of newspapers, shopping news, or magazines. 31.3401(a)(10)-1 Section 31.3401(a)(10)-1 Internal..., shopping news, or magazines. (a) Services of individuals under age 18. Remuneration for services performed... services performed by an employee in, and at the time of, the sale of newspapers or magazines to ultimate...

  1. RavenDB high performance

    Ritchie, Brian

    2013-01-01

    RavenDB High Performance is comprehensive yet concise tutorial that developers can use to.This book is for developers & software architects who are designing systems in order to achieve high performance right from the start. A basic understanding of RavenDB is recommended, but not required. While the book focuses on advanced topics, it does not assume that the reader has a great deal of prior knowledge of working with RavenDB.

  2. High-Performance Operating Systems

    Sharp, Robin

    1999-01-01

    Notes prepared for the DTU course 49421 "High Performance Operating Systems". The notes deal with quantitative and qualitative techniques for use in the design and evaluation of operating systems in computer systems for which performance is an important parameter, such as real-time applications......, communication systems and multimedia systems....

  3. ASK Magazine; No. 21

    Laufer, Alexander (Editor); Little, Terry (Editor); Davis, Marty (Editor); Simmons, Jessica (Editor); Margolies, Donald (Editor); Goshorn, Larry (Editor)

    2005-01-01

    THIS ISSUE FEATURES A VISUAL DEPICTION OF THE ACADEMY of Program and Project Leadership (APPL). I imagine a variety of initial reactions to the drawing. One might be, "What is a cartoon doing in a magazine about project management?" Or perhaps, "Wow, nice colors-and fun." Another may be to closely search the image for signs, symbols and meaning. Still another, to read a new level of innovation and creativity into the picture. Undoubtedly, some readers will raise questions about the cost. Of course, any reaction is a sign of engagement. The stronger, the more energized the emotional and cognitive processing, the better. It is a sign of attention and interaction. For I've heard it said, "You only need to worry if they don t care one way or the other." So what is the point of the picture? To stimulate interest, raise questions, promote discussion, and maybe raise a smile.. .That, at least, was my initial reaction when I was introduced to the work of Nancy Hegedus, who helps to create these drawings for Root Learning Inc. At the NASA PM Conference, I was first shown the work Nancy had been doing with the help of Goddard s Knowledge Management Architect, Dr. Ed Rogers. I was immediately drawn into the power of visualization as a tool for more effective learning, communicating, and conveying complex knowledge concepts. We need new tools in today s world, where information and data overwhelms by sheer volume. There are articles, pamphlets, communications, and white papers-all aiming to convince and influence. Reactions to these tend to be either avoidance or mind-numbing, heavy-eyed consent; the message never registers or enters the soul. That s one of the reasons that APPL s Knowledge Sharing Initiative (KSI) has turned to storytelling as a memorable way of transfer- ring knowledge, inspiring imitation of best practices, and spurring reflection. ASK Magazine s recent fourth birthday marks an important milestone in APPL s continuing quest to provide ongoing support to

  4. Identifying High Performance ERP Projects

    Stensrud, Erik; Myrtveit, Ingunn

    2002-01-01

    Learning from high performance projects is crucial for software process improvement. Therefore, we need to identify outstanding projects that may serve as role models. It is common to measure productivity as an indicator of performance. It is vital that productivity measurements deal correctly with variable returns to scale and multivariate data. Software projects generally exhibit variable returns to scale, and the output from ERP projects is multivariate. We propose to use Data Envelopment ...

  5. INL High Performance Building Strategy

    Jennifer D. Morton

    2010-02-01

    High performance buildings, also known as sustainable buildings and green buildings, are resource efficient structures that minimize the impact on the environment by using less energy and water, reduce solid waste and pollutants, and limit the depletion of natural resources while also providing a thermally and visually comfortable working environment that increases productivity for building occupants. As Idaho National Laboratory (INL) becomes the nation’s premier nuclear energy research laboratory, the physical infrastructure will be established to help accomplish this mission. This infrastructure, particularly the buildings, should incorporate high performance sustainable design features in order to be environmentally responsible and reflect an image of progressiveness and innovation to the public and prospective employees. Additionally, INL is a large consumer of energy that contributes to both carbon emissions and resource inefficiency. In the current climate of rising energy prices and political pressure for carbon reduction, this guide will help new construction project teams to design facilities that are sustainable and reduce energy costs, thereby reducing carbon emissions. With these concerns in mind, the recommendations described in the INL High Performance Building Strategy (previously called the INL Green Building Strategy) are intended to form the INL foundation for high performance building standards. This revised strategy incorporates the latest federal and DOE orders (Executive Order [EO] 13514, “Federal Leadership in Environmental, Energy, and Economic Performance” [2009], EO 13423, “Strengthening Federal Environmental, Energy, and Transportation Management” [2007], and DOE Order 430.2B, “Departmental Energy, Renewable Energy, and Transportation Management” [2008]), the latest guidelines, trends, and observations in high performance building construction, and the latest changes to the Leadership in Energy and Environmental Design

  6. Medical Articles in Eighteenth Century American Magazines

    Coggins, Clemency Chase

    1965-01-01

    Formal medical publication began in the United States with The Medical Repository in 1797. Between 1741, the date of the first American magazine, and 1797 medical articles were included in general magazines. This study deals with ten representative magazines and reviews their general content. The varying content of the medical articles is analyzed into broad categories, and several important physicians, contributors to the magazines, are discussed. The Medical Repository is treated as a culmination of eighteenth century medical publication. PMID:14306031

  7. Children's Magazine Use in a Selected School.

    Antlitz, Patricia

    A study examined teachers' opinions as to what makes children's magazines good as well as which magazines they are currently using in their classrooms and in what ways magazines are being used. Subjects, 10 (of 19) experienced third-, fourth-, and fifth-grade teachers at P.S. 106 in the Bronx, New York City, responded to a questionnaire concerning…

  8. Vox Magazine, modes of use

    Omar Chauvié

    2015-02-01

    Full Text Available Vox is a cultural magazine from Bahía Blanca that circulated between the mid-nineties and the beginning of this century. This paper analyses the different types in which this magazine proposes new approches based on different kinds of materials, formats and links between poetry and visual arts, as well as the singular way in which literature measure itself in the visual art’s field in the context of this alternative media and the frame of meanings and assessments that these materials promote.

  9. High performance fuel technology development

    Koon, Yang Hyun; Kim, Keon Sik; Park, Jeong Yong; Yang, Yong Sik; In, Wang Kee; Kim, Hyung Kyu [KAERI, Daejeon (Korea, Republic of)

    2012-01-15

    {omicron} Development of High Plasticity and Annular Pellet - Development of strong candidates of ultra high burn-up fuel pellets for a PCI remedy - Development of fabrication technology of annular fuel pellet {omicron} Development of High Performance Cladding Materials - Irradiation test of HANA claddings in Halden research reactor and the evaluation of the in-pile performance - Development of the final candidates for the next generation cladding materials. - Development of the manufacturing technology for the dual-cooled fuel cladding tubes. {omicron} Irradiated Fuel Performance Evaluation Technology Development - Development of performance analysis code system for the dual-cooled fuel - Development of fuel performance-proving technology {omicron} Feasibility Studies on Dual-Cooled Annular Fuel Core - Analysis on the property of a reactor core with dual-cooled fuel - Feasibility evaluation on the dual-cooled fuel core {omicron} Development of Design Technology for Dual-Cooled Fuel Structure - Definition of technical issues and invention of concept for dual-cooled fuel structure - Basic design and development of main structure components for dual- cooled fuel - Basic design of a dual-cooled fuel rod.

  10. High Performance Bulk Thermoelectric Materials

    Ren, Zhifeng [Boston College, Chestnut Hill, MA (United States)

    2013-03-31

    Over 13 plus years, we have carried out research on electron pairing symmetry of superconductors, growth and their field emission property studies on carbon nanotubes and semiconducting nanowires, high performance thermoelectric materials and other interesting materials. As a result of the research, we have published 104 papers, have educated six undergraduate students, twenty graduate students, nine postdocs, nine visitors, and one technician.

  11. High performance in software development

    CERN. Geneva; Haapio, Petri; Liukkonen, Juha-Matti

    2015-01-01

    What are the ingredients of high-performing software? Software development, especially for large high-performance systems, is one the most complex tasks mankind has ever tried. Technological change leads to huge opportunities but challenges our old ways of working. Processing large data sets, possibly in real time or with other tight computational constraints, requires an efficient solution architecture. Efficiency requirements span from the distributed storage and large-scale organization of computation and data onto the lowest level of processor and data bus behavior. Integrating performance behavior over these levels is especially important when the computation is resource-bounded, as it is in numerics: physical simulation, machine learning, estimation of statistical models, etc. For example, memory locality and utilization of vector processing are essential for harnessing the computing power of modern processor architectures due to the deep memory hierarchies of modern general-purpose computers. As a r...

  12. Food references in UK children's magazines - an oral health perspective.

    Chapman, K J; Fairchild, R M; Morgan, M Z

    2014-11-01

    Children's magazines are popular in the United Kingdom, but their content is poorly regulated. Consequently, food and beverages high in fat, salt and sugar (HFSS), detrimental to oral and wider health, make unrestricted appearances. The study aim was to assess the amount of HFSS food and drink children are exposed to while reading magazines; with particular focus on foods containing free sugars due to their known cariogenic properties, and foods with low pH due to their erosive potential. Eleven of the most popular UK children's magazines were selected and purchased at four separate time points in 2012. These 44 magazines were examined using content analysis; any references to food/beverages (in advertisements, free gifts, editorial and general content) were recorded. Of the 508 food references observed, 73.6% (374/508) were for foods detrimental to oral health owing to their high sugar and/or acid content. 5.9% (30/508) were considered 'unhealthy' due to their fat or salt content. 20.5% of references were for 'healthy' foods (104/508). The most common food categories referenced were baked goods (181/508) and sweets (86/508). Over a third (36.4%, 16/44) of magazines came with free sweets. In terms of positioning, the food/drink references were predominantly found in the general content of the magazines, including the editorial spreads. Direct advertisements for food/drink only accounted for 9.6% (36/374) of the total number of references counted. Food references within children's magazines are biased towards unhealthy foods especially those detrimental to oral health; these permeate throughout the general and editorial content and are not restricted to direct advertisements. Magazine editors, journalists and illustrators are responsible for the editorial and general content of magazines. Without regulation, subliminal placement of advertisements within editorial and general content leads to 'advertorials' which are known to confuse children and parents alike. This

  13. Modular magazine for suitable handling of microparts in industry

    Grimme, Ralf; Schmutz, Wolfgang; Schlenker, Dirk; Schuenemann, Matthias; Stock, Achim; Schaefer, Wolfgang

    1998-01-01

    Microassembly and microadjustment techniques are key technologies in the industrial production of hybrid microelectromechanical systems. One focal point in current microproduction research and engineering is the design and development of high-precision microassembly and microadjustment equipment capable of operating within the framework of flexible automated industrial production. As well as these developments, suitable microassembly tools for industrial use also need to be equipped with interfaces for the supply and delivery of microcomponents. The microassembly process necessitates the supply of microparts in a geometrically defined manner. In order to reduce processing steps and production costs, there is a demand for magazines capable of providing free accessibility to the fixed microcomponents. Commonly used at present are feeding techniques, which originate from the field of semiconductor production. However none of these techniques fully meets the requirements of industrial microassembly technology. A novel modular magazine set, developed and tested in a joint project, is presented here. The magazines are able to hold microcomponents during cleaning, inspection and assembly without nay additional handling steps. The modularity of their design allows for maximum technical flexibility. The modular magazine fits into currently practiced SEMI standards. The design and concept of the magazine enables industrial manufacturers to promote a cost-efficient and flexible precision assembly of microelectromechanical systems.

  14. A trolley mounted magazine for reactor maintenance

    Brennan, P.J.; Madani, M.; Ridgway, G.H. [GE Hitachi Nuclear Energy Canada, Peterborough, Ontario (Canada)], E-mail: patrick1.brennan@ge.com, mehdi.madani@ge.com, guy.ridgway@ge.com; Lundy, E.; Knight, D. [IM and CS (Inspection, Maintenance and Commerical Services), Ontario Power Generation, Ajax, Ontario (Canada)], E-mail: erroll.lundy@opg.com, david.knight@opg.com

    2009-03-15

    This paper describes the design of a mechanism incorporating a rotary magazine to be mounted on a fuelling machine transport trolley for use at a Darlington reactor during a feeder replacement or maintenance outage. The magazine stores reactor channel maintenance components, such as channel isolation plugs and vented closure plugs, in twelve available magazine channels. Use of the magazine rather than a fuelling machine reduces the time required to transfer such components between the Central Service Area and reactor channels. Component transfers are accomplished by locking the fuelling machine onto one of the magazine channels and using a local controller to execute commands received from the fuel handling control system. (author)

  15. A trolley mounted magazine for reactor maintenance

    Brennan, P.J.; Madani, M.; Ridgway, G.H., E-mail: patrick1.brennan@ge.com, E-mail: mehdi.madani@ge.com, E-mail: guy.ridgway@ge.com [GE Hitachi Nuclear Energy Canada, Peterborough, Ontario (Canada); Lundy, E.; Knight, D., E-mail: erroll.lundy@opg.com, E-mail: david.knight@opg.com [Ontario Power Generation, Inspection, Maintenance and Commercial Services, Ajax, Ontario (Canada)

    2008-07-01

    This paper describes the design of a mechanism incorporating a rotary magazine to be mounted on a fuelling machine transport trolley for use at a Darlington reactor during a feeder replacement or maintenance outage. The magazine stores reactor channel maintenance components, such as channel isolation plugs and vented closure plugs, in twelve available magazine channels. Use of the magazine rather than a fuelling machine reduces the time required to transfer such components between the Central Service Area and reactor channels. Component transfers are accomplished by locking the fuelling machine onto one of the magazine channels and using a local controller to execute commands received from the fuel handling control system. (author)

  16. A trolley mounted magazine for reactor maintenance

    Brennan, P.J.; Madani, M.; Ridgway, G.H.; Lundy, E.; Knight, D.

    2009-01-01

    This paper describes the design of a mechanism incorporating a rotary magazine to be mounted on a fuelling machine transport trolley for use at a Darlington reactor during a feeder replacement or maintenance outage. The magazine stores reactor channel maintenance components, such as channel isolation plugs and vented closure plugs, in twelve available magazine channels. Use of the magazine rather than a fuelling machine reduces the time required to transfer such components between the Central Service Area and reactor channels. Component transfers are accomplished by locking the fuelling machine onto one of the magazine channels and using a local controller to execute commands received from the fuel handling control system. (author)

  17. A trolley mounted magazine for reactor maintenance

    Brennan, P.J.; Madani, M.; Ridgway, G.H.; Lundy, E.; Knight, D.

    2008-01-01

    This paper describes the design of a mechanism incorporating a rotary magazine to be mounted on a fuelling machine transport trolley for use at a Darlington reactor during a feeder replacement or maintenance outage. The magazine stores reactor channel maintenance components, such as channel isolation plugs and vented closure plugs, in twelve available magazine channels. Use of the magazine rather than a fuelling machine reduces the time required to transfer such components between the Central Service Area and reactor channels. Component transfers are accomplished by locking the fuelling machine onto one of the magazine channels and using a local controller to execute commands received from the fuel handling control system. (author)

  18. Healing Magazine, Volume 8, 2003.

    2003

    This volume of "Healing Magazine" features practical, clinical information aimed at sharing current work in children's mental health. The first issue contains articles on intervention for self-injurious behavior, providing school-based grief groups, effectively using time-out as a parenting tool, and KidsPeace's suicide prevention…

  19. Neo4j high performance

    Raj, Sonal

    2015-01-01

    If you are a professional or enthusiast who has a basic understanding of graphs or has basic knowledge of Neo4j operations, this is the book for you. Although it is targeted at an advanced user base, this book can be used by beginners as it touches upon the basics. So, if you are passionate about taming complex data with the help of graphs and building high performance applications, you will be able to get valuable insights from this book.

  20. Anhembi magazine and nuclear energy

    Duran, Gustavo Barrientos [Universidade de Sao Paulo (USP), SP (Brazil). Escola de Comunicacoes e Artes. Dept. de Jornalismo e Editoracao], e-mail: ggustavo@usp.br; Gordon, Ana Maria P.L. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: amgordon@ipen.br

    2009-07-01

    From 1952 to 1962, a scientific and cultural periodic, named 'Revista Anhembi, was sold monthly. The magazine target was Brazilian and foreign schools and universities, his students and whoever was interested on culture, science, politics or signed articles. This publication purpose was to be the divulgation vehicle of new cultural and scientific ideas, most of them produced by Brazilian researchers, intellectuals and artists. Together with the cultural production of authors like Carlos Drummond de Andrade, the magazine also covered the major happenings from Brazil and the world. The editorials were signed by the magazine director - Paulo Duarte - one of the intellectuals with participation in the University of Sao Paulo foundation. Other researchers, already well-known at that time, such as Jose Reis, Florestan Fernandes and others, published in Anhembi, regularly. Their articles presented always a favorable content to democracy and the country development. What was out-of-date and its 'agents', the dictatorships, the corruption were open enemies of the magazine, which criticized governments, like for example, General Salazar's, in Portugal. The criticisms, sometimes contrary to the status quo, finally justified the circulation prohibition in some countries, like in Portugal, and also a diminishing of the advertising sponsorship Not only because of these problems, the increase in the paper cost made, in the long run, the publication of Anhembi impossible to continue. Meanwhile, the national nuclear policy and its defenders, like Alvaro Alberto da Motta e Silva, besides some other researchers, was not one of the routine issues covered by the magazine. Despite the magazine reported, in every new edition, a series of occurrences and claims - new universities and research centers foundation in the country, the struggle for funds, the national commissions asking for the full-time dedication regime for research, the nuclear issue focused, mainly

  1. Anhembi magazine and nuclear energy

    Duran, Gustavo Barrientos

    2009-01-01

    From 1952 to 1962, a scientific and cultural periodic, named 'Revista Anhembi, was sold monthly. The magazine target was Brazilian and foreign schools and universities, his students and whoever was interested on culture, science, politics or signed articles. This publication purpose was to be the divulgation vehicle of new cultural and scientific ideas, most of them produced by Brazilian researchers, intellectuals and artists. Together with the cultural production of authors like Carlos Drummond de Andrade, the magazine also covered the major happenings from Brazil and the world. The editorials were signed by the magazine director - Paulo Duarte - one of the intellectuals with participation in the University of Sao Paulo foundation. Other researchers, already well-known at that time, such as Jose Reis, Florestan Fernandes and others, published in Anhembi, regularly. Their articles presented always a favorable content to democracy and the country development. What was out-of-date and its 'agents', the dictatorships, the corruption were open enemies of the magazine, which criticized governments, like for example, General Salazar's, in Portugal. The criticisms, sometimes contrary to the status quo, finally justified the circulation prohibition in some countries, like in Portugal, and also a diminishing of the advertising sponsorship Not only because of these problems, the increase in the paper cost made, in the long run, the publication of Anhembi impossible to continue. Meanwhile, the national nuclear policy and its defenders, like Alvaro Alberto da Motta e Silva, besides some other researchers, was not one of the routine issues covered by the magazine. Despite the magazine reported, in every new edition, a series of occurrences and claims - new universities and research centers foundation in the country, the struggle for funds, the national commissions asking for the full-time dedication regime for research, the nuclear issue focused, mainly, bombing tests by the

  2. Anhembi magazine and nuclear energy

    Duran, Gustavo Barrientos [Universidade de Sao Paulo (USP), SP (Brazil). Escola de Comunicacoes e Artes. Dept. de Jornalismo e Editoracao], e-mail: ggustavo@usp.br; Gordon, Ana Maria P.L. [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil)], e-mail: amgordon@ipen.br

    2009-07-01

    From 1952 to 1962, a scientific and cultural periodic, named 'Revista Anhembi, was sold monthly. The magazine target was Brazilian and foreign schools and universities, his students and whoever was interested on culture, science, politics or signed articles. This publication purpose was to be the divulgation vehicle of new cultural and scientific ideas, most of them produced by Brazilian researchers, intellectuals and artists. Together with the cultural production of authors like Carlos Drummond de Andrade, the magazine also covered the major happenings from Brazil and the world. The editorials were signed by the magazine director - Paulo Duarte - one of the intellectuals with participation in the University of Sao Paulo foundation. Other researchers, already well-known at that time, such as Jose Reis, Florestan Fernandes and others, published in Anhembi, regularly. Their articles presented always a favorable content to democracy and the country development. What was out-of-date and its 'agents', the dictatorships, the corruption were open enemies of the magazine, which criticized governments, like for example, General Salazar's, in Portugal. The criticisms, sometimes contrary to the status quo, finally justified the circulation prohibition in some countries, like in Portugal, and also a diminishing of the advertising sponsorship Not only because of these problems, the increase in the paper cost made, in the long run, the publication of Anhembi impossible to continue. Meanwhile, the national nuclear policy and its defenders, like Alvaro Alberto da Motta e Silva, besides some other researchers, was not one of the routine issues covered by the magazine. Despite the magazine reported, in every new edition, a series of occurrences and claims - new universities and research centers foundation in the country, the struggle for funds, the national commissions asking for the full-time dedication regime for research, the nuclear issue focused, mainly, bombing tests by the

  3. Radon in houses utilizing stone magazines for heat accumulation

    Stranden, E.

    1981-01-01

    Measurements of 222 Rn and its daughters in three solar energy houses utilizing stone magazines for heat accumulation are reported. Theoretical calculations of the radon contribution from the stone magazines seem to be in good agreement with the measured values. The survey indicated that this method for heat accumulation could give a significant increase in the indoor radon concentration if the radium concentration of the stone material is high. The theoretical considerations suggest that a radium concentration of 1 pCi/g of the stone material could give an increment of the radon concentration in the indoor air of about 1 pCi/l. during the heating season in a house with air volume of 250 m 3 and a 10 5 -kg stone magazine. (author)

  4. Changes in the ''Urania - Postepy Astronomii'' astronomical magazine

    Czart, Krzysztof; Mikołajewski, Maciej

    2014-12-01

    ''Urania - Postepy Astronomii'' is one of the oldest popular science magazines about astronomy in the world. During 2012-2013 it undergone revolutionary changes into a modern magazine suitable for 21st century market of popular science press, at the same time maintaining a high level of popularization. The main changes included: diversity of content, full colour for all pages, changing website into modern internet portal, using social media, ambitious project of a digital archive of all issues from 1922 to 2011, web store to provide easier access for everyone, and projects aimed at schools and school libraries.

  5. High performance MEAs. Final report

    NONE

    2012-07-15

    The aim of the present project is through modeling, material and process development to obtain significantly better MEA performance and to attain the technology necessary to fabricate stable catalyst materials thereby providing a viable alternative to current industry standard. This project primarily focused on the development and characterization of novel catalyst materials for the use in high temperature (HT) and low temperature (LT) proton-exchange membrane fuel cells (PEMFC). New catalysts are needed in order to improve fuel cell performance and reduce the cost of fuel cell systems. Additional tasks were the development of new, durable sealing materials to be used in PEMFC as well as the computational modeling of heat and mass transfer processes, predominantly in LT PEMFC, in order to improve fundamental understanding of the multi-phase flow issues and liquid water management in fuel cells. An improved fundamental understanding of these processes will lead to improved fuel cell performance and hence will also result in a reduced catalyst loading to achieve the same performance. The consortium have obtained significant research results and progress for new catalyst materials and substrates with promising enhanced performance and fabrication of the materials using novel methods. However, the new materials and synthesis methods explored are still in the early research and development phase. The project has contributed to improved MEA performance using less precious metal and has been demonstrated for both LT-PEM, DMFC and HT-PEM applications. New novel approach and progress of the modelling activities has been extremely satisfactory with numerous conference and journal publications along with two potential inventions concerning the catalyst layer. (LN)

  6. High Performance Proactive Digital Forensics

    Alharbi, Soltan; Traore, Issa; Moa, Belaid; Weber-Jahnke, Jens

    2012-01-01

    With the increase in the number of digital crimes and in their sophistication, High Performance Computing (HPC) is becoming a must in Digital Forensics (DF). According to the FBI annual report, the size of data processed during the 2010 fiscal year reached 3,086 TB (compared to 2,334 TB in 2009) and the number of agencies that requested Regional Computer Forensics Laboratory assistance increasing from 689 in 2009 to 722 in 2010. Since most investigation tools are both I/O and CPU bound, the next-generation DF tools are required to be distributed and offer HPC capabilities. The need for HPC is even more evident in investigating crimes on clouds or when proactive DF analysis and on-site investigation, requiring semi-real time processing, are performed. Although overcoming the performance challenge is a major goal in DF, as far as we know, there is almost no research on HPC-DF except for few papers. As such, in this work, we extend our work on the need of a proactive system and present a high performance automated proactive digital forensic system. The most expensive phase of the system, namely proactive analysis and detection, uses a parallel extension of the iterative z algorithm. It also implements new parallel information-based outlier detection algorithms to proactively and forensically handle suspicious activities. To analyse a large number of targets and events and continuously do so (to capture the dynamics of the system), we rely on a multi-resolution approach to explore the digital forensic space. Data set from the Honeynet Forensic Challenge in 2001 is used to evaluate the system from DF and HPC perspectives.

  7. Sexual development and behaviour issues in Polish teenage magazines.

    Kopacz, Marek S

    2006-12-01

    Adolescents often look to mass media for information regarding issues of sexuality. As one form of media, teenage magazines have long constituted a pervasive and effective element of adolescent media exposure. Teenage magazines discuss a number of aspects concerning adolescent sexuality. Considering their potential impact on health related behaviors, the information they provide and the message(s) they send warrant attention. The aim of this study is to perform a content analysis of sexual development and behavior information presented in Polish teenage magazines. Social Cognitive Theory was used as a theoretical basis for this analysis. The media chosen for this study were general-themed publications targeting an adolescent female audience: Bravo Girl!, Filipinka and Dziewczyna. Each entry was analyzed using a structured key. The specific categories of behavior and development used for this study are: biological information, pedagogic instruction, topics of moral-ethical concern, results of sexual activity, and interpersonal relationships. Each category was then subdivided into separate units. The findings indicate that Polish teenage magazines predominantly focus on relationships, contraception and sex education. Relationships were most often of a romantic nature and discussed sexual activity or the potential of sexual activity. Non-prescription contraceptive methods were most often discussed, with attention given to pregnancy prevention. Sex education offered detailed information on sexual practices and behaviors with much discussion on losing one's virginity. The general approach of the analyzed magazines is that adolescents currently are, or soon will be, sexually active. As a result, certain sexual behavior and development issues are discussed in great detail, while other topics are somewhat neglected. Accepting information-seeking during adolescence as commonplace, these findings suggest that teenage magazines hold the potential for influencing adolescent

  8. 46 CFR 196.85-1 - Magazine operation and control.

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Magazine operation and control. 196.85-1 Section 196.85... OPERATIONS Magazine Control § 196.85-1 Magazine operation and control. (a) Keys to magazine spaces and magazine chests shall be kept in the sole control or custody of the Master or one delegated qualified...

  9. 46 CFR 194.10-30 - Magazine sprinklers.

    2010-10-01

    ... 46 Shipping 7 2010-10-01 2010-10-01 false Magazine sprinklers. 194.10-30 Section 194.10-30..., USE, AND CONTROL OF EXPLOSIVES AND OTHER HAZARDOUS MATERIALS Magazines § 194.10-30 Magazine sprinklers... shall be installed in each magazine or magazine group. The control valve shall generally be in...

  10. 27 CFR 555.209 - Construction of type 3 magazines.

    2010-04-01

    ... magazines. 555.209 Section 555.209 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 3 magazines. A type 3 magazine is a “day-box” or other portable magazine. It must be fire-resistant, weather-resistant, and theft-resistant. A type 3 magazine is to be constructed of not less than...

  11. High performance light water reactor

    Squarer, D.; Schulenberg, T.; Struwe, D.; Oka, Y.; Bittermann, D.; Aksan, N.; Maraczy, C.; Kyrki-Rajamaeki, R.; Souyri, A.; Dumaz, P.

    2003-01-01

    The objective of the high performance light water reactor (HPLWR) project is to assess the merit and economic feasibility of a high efficiency LWR operating at thermodynamically supercritical regime. An efficiency of approximately 44% is expected. To accomplish this objective, a highly qualified team of European research institutes and industrial partners together with the University of Tokyo is assessing the major issues pertaining to a new reactor concept, under the co-sponsorship of the European Commission. The assessment has emphasized the recent advancement achieved in this area by Japan. Additionally, it accounts for advanced European reactor design requirements, recent improvements, practical design aspects, availability of plant components and the availability of high temperature materials. The final objective of this project is to reach a conclusion on the potential of the HPLWR to help sustain the nuclear option, by supplying competitively priced electricity, as well as to continue the nuclear competence in LWR technology. The following is a brief summary of the main project achievements:-A state-of-the-art review of supercritical water-cooled reactors has been performed for the HPLWR project.-Extensive studies have been performed in the last 10 years by the University of Tokyo. Therefore, a 'reference design', developed by the University of Tokyo, was selected in order to assess the available technological tools (i.e. computer codes, analyses, advanced materials, water chemistry, etc.). Design data and results of the analysis were supplied by the University of Tokyo. A benchmark problem, based on the 'reference design' was defined for neutronics calculations and several partners of the HPLWR project carried out independent analyses. The results of these analyses, which in addition help to 'calibrate' the codes, have guided the assessment of the core and the design of an improved HPLWR fuel assembly. Preliminary selection was made for the HPLWR scale

  12. Targeted advertising in magazine markets

    Chandra, Ambarish; Kaiser, Ulrich

    2010-01-01

    We examine the scope and value of targeted advertising in the magazine industry. We use data on reader characteristics at individual media, in contrast to previous work that has needed to infer this information from aggregate data. Our results show a strong relationship between subscriber characteristics and advertising prices. Advertisers clearly value more homogenous groups of readers, measured according to income, gender and age. Our results explain recent trends of declining advertising e...

  13. Little Magazines etc. - en dossier

    Ørum, Tania; Serup, Martin Glaz; Olsson, Jesper

    2007-01-01

    Jesper Olsson, Martin Glaz Serup og Tania Ørum redegør her for den sektion af tidsskriftet OEI (nr. 35:440-531), som de har redigeret i fællesskab, og som handler om de små tidsskrifter (little magazines), der op gennem det 20. århundrede har haft så stor betydning for modernismen og avantgarden....

  14. Development of high performance cladding

    Kiuchi, Kiyoshi

    2003-01-01

    The developments of superior next-generation light water reactor are requested on the basis of general view points, such as improvement of safety, economics, reduction of radiation waste and effective utilization of plutonium, until 2030 year in which conventional reactor plants should be renovate. Improvements of stainless steel cladding for conventional high burn-up reactor to more than 100 GWd/t, developments of manufacturing technology for reduced moderation-light water reactor (RMWR) of breeding ratio beyond 1.0 and researches of water-materials interaction on super critical pressure-water cooled reactor are carried out in Japan Atomic Energy Research Institute. Stable austenite stainless steel has been selected for fuel element cladding of advanced boiling water reactor (ABWR). The austenite stain less has the superiority for anti-irradiation properties, corrosion resistance and mechanical strength. A hard spectrum of neutron energy up above 0.1 MeV takes place in core of the reduced moderation-light water reactor, as liquid metal-fast breeding reactor (LMFBR). High performance cladding for the RMWR fuel elements is required to get anti-irradiation properties, corrosion resistance and mechanical strength also. Slow strain rate test (SSRT) of SUS 304 and SUS 316 are carried out for studying stress corrosion cracking (SCC). Irradiation tests in LMFBR are intended to obtain irradiation data for damaged quantity of the cladding materials. (M. Suetake)

  15. Poetry magazines: description of an object

    Carlos Battilana

    2015-02-01

    Full Text Available This article sets out to examine different mechanisms of poetry magazines as objects of reflections per se. Literary magazines have a cartographical quality in the sense that they organize the map of a group of works and authors. A magazine produces a critical system of selection. Far from suggesting a stable nature of literary magazines, each of their interventions influences a concrete community and temporality in different ways, which turns each historical moment into a stimulus whose effects are not known beforehand.

  16. The Magazine as a Source of Research

    Katia Aily Franco de Camargo

    2007-06-01

    Full Text Available This article, that is a small part of a doctoral thesis, has for objective to present, in a systematic way, the magazine as a source of research and the importance, to understand its meaning, to study the way that a specific document has being diffused. In this direction, we started with a theoretical discussion about magazine, differentiating it of the newspaper and the book. After that, we tried to describe a kind of a methodology to work with a magazine. To be clearer we presented, as an example, the study of the famous French magazine Revue des Deux Mondes.

  17. Nutrition claims in British women's magazines from 1940 to 1955.

    Barker, M E; Burridge, J D

    2014-04-01

    The present study examined dietary messages conveyed in articles and advertising in two popular British women's magazines, Woman and Home and Woman's Own, between 1940 and 1954. A qualitative analysis of written content was performed, focusing on regularities evident in content, and addressing the construction of the role of women in relation to food provision, as well as assertions for nutritional health. The setting comprised a desk-based study. The study sample encompassed 37 magazines, and yielded a corpus of 569 articles concerned with food or dietary supplements, of which 80.1% were advertisements. Ministry of Food dietary advice featured prominently up to 1945 and advocated food consumption according to a simple nutrient classification. Advertising and article content also used this classification; advocating consumption of food and supplements on the grounds of energy, growth and protection of health was customary. Providing food to meet nutritional needs was depicted as fundamental to women's war effort and their role as dutiful housewives. Advertising in 1950s magazines also focused on nutritional claims, with a particular emphasis on energy provision. These claims reflected the prevailing food policy and scientific understanding of nutritional health. This analysis of food messages in women's magazines provides lessons for contemporary nutrition policy. © 2013 The Authors Journal of Human Nutrition and Dietetics © 2013 The British Dietetic Association Ltd.

  18. High-performance commercial building facades

    Lee, Eleanor; Selkowitz, Stephen; Bazjanac, Vladimir; Inkarojrit, Vorapat; Kohler, Christian

    2002-06-01

    This study focuses on advanced building facades that use daylighting, sun control, ventilation systems, and dynamic systems. A quick perusal of the leading architectural magazines, or a discussion in most architectural firms today will eventually lead to mention of some of the innovative new buildings that are being constructed with all-glass facades. Most of these buildings are appearing in Europe, although interestingly U.S. A/E firms often have a leading role in their design. This ''emerging technology'' of heavily glazed fagades is often associated with buildings whose design goals include energy efficiency, sustainability, and a ''green'' image. While there are a number of new books on the subject with impressive photos and drawings, there is little critical examination of the actual performance of such buildings, and a generally poor understanding as to whether they achieve their performance goals, or even what those goals might be. Even if the building ''works'' it is often dangerous to take a design solution from one climate and location and transport it to a new one without a good causal understanding of how the systems work. In addition, there is a wide range of existing and emerging glazing and fenestration technologies in use in these buildings, many of which break new ground with respect to innovative structural use of glass. It is unclear as to how well many of these designs would work as currently formulated in California locations dominated by intense sunlight and seismic events. Finally, the costs of these systems are higher than normal facades, but claims of energy and productivity savings are used to justify some of them. Once again these claims, while plausible, are largely unsupported. There have been major advances in glazing and facade technology over the past 30 years and we expect to see continued innovation and product development. It is critical in this process to be able to

  19. Prevalence of infant formula advertisements in parenting magazines over a 5-year span.

    Basch, Corey H; Shaffer, Ellen J; Hammond, Rodney; Rajan, Sonali

    2013-01-01

    Marketing of infant formula contributes to a decreased likelihood to breastfeed. This study established the prevalence of infant formula advertisements in two popular US parenting magazines and explored trends in infant formula advertisement prevalence from 2007 to 2012. Advertisements were analyzed using a comprehensive coding schematic. We established a high proportion of 0.43 advertisements per page of content in both magazines and observed a significant increase in infant formula advertisement prevalence beginning in 2009. Infant formula companies use aggressive marketing in parenting magazines. Nurses who are well-trained in breastfeeding best practices can offer new mothers evidence-based information on the benefits of breastfeeding. © 2013.

  20. Evaluation of Structural Integrity for the Magazine Housing of Fuelling Machine

    Jua, Yong Sun; Han, Sung Bong; Chu, Jung Ho; Lee, Jeong Yoon; Kwak, Dae Il; Park, Tae Youn; Park, Wan Kyu; Lee, Kang Yong

    2009-01-01

    Wolsong NPP 1 which is the reactor type of the PHWR uses the natural uranium and has 380 fuel channels. For 100% power operation, the refueling is accomplished in-service. The fuel changing operation is based on the combined use of two remotely controlled fuelling machines (F/M), one operating on each end of a fuel channel. New fuel bundles, from one F/M, are inserted into a fuel channel in the same direction as the coolant flow and the displaced irradiated fuel bundles are received into the second F/M at the other end of the fuel channel. The F/M Magazine acts as a temporary storage area for fuel bundles and the various plugs in the F/M during refueling. It generates thermal and mechanical loads in the F/M Magazine. Together with seismic loads during seismic activity, these loads are considered in the Magazine design. In this paper, the evaluation of the structural integrity of the F/M Magazine housing is performed for Design, Test and Service condition loads given in the analysis requirement for the extended life time from 30 years to 50 years. The Magazine is classified as Safety Class 1. A stress analysis of the Magazine is carried out based on the requirements of the ASME Boiler and Pressure Vessel Code, Section III, Subsection NB, 1998 Edition with 1999 Addenda. The Magazine housing is made up of a thick cylindrical shell and is connected to the End cover at one end through 30' Grayloc clamp. The other end of the Magazine is clamped to the ram housing with a 10' Grayloc clamp. The material of construction of the magazine housing is ASME SA-182, F6a, class 2. The stress analysis is done by using the finite element method

  1. INFORMATION ABOUT DRUGS IN FAMILY MAGAZINES

    VANTRIGT, AM; VANDENBERG, LTWD; PASMAN, M; HAAIJER-RUSKAMP, FM; WILLEMS, J; TROMP, TFJ

    1995-01-01

    Family magazines can play an important role in the diffusion of medical information and information regarding drugs to a 'lay audience'. We describe what kind of drugs are discussed in the family magazines and which information regarding these drugs is given. Furthermore, we look into the

  2. Southern Identity in "Southern Living" Magazine

    Lauder, Tracy

    2012-01-01

    A fantasy-theme analysis of the editors' letters in "Southern Living" magazine shows an editorial vision of valuing the past and showcasing unique regional qualities. In addition, a content analysis of the visual representation of race in the magazine's formative years and recent past validates that inhabitants of the region were portrayed…

  3. 49 CFR 174.110 - Car magazine.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Car magazine. 174.110 Section 174.110...) Materials § 174.110 Car magazine. When specially authorized by the carrier, Division 1.1 or 1.2 (explosive... packages of Class 1 (explosive) materials are placed in a “magazine” box made of sound lumber not less than...

  4. Magazine Picture Collage in Group Supervision

    Shepard, Blythe C.; Guenette, Francis L.

    2010-01-01

    A magazine picture collage activity was used with three female counsellor education students as a vehicle to support them in processing their experience as counsellors in training. The use of magazine picture collage in group supervision is described, and the benefits and challenges are presented. The collages served as jumping-off points for…

  5. Research Review: Laboratory Student Magazine Programs.

    Wheeler, Tom

    1994-01-01

    Explores research on student-produced magazines at journalism schools, including the nature of various programs and curricular structures, ethical considerations, and the role of faculty advisors. Addresses collateral sources that provide practical and philosophical foundations for the establishment and conduct of magazine production programs.…

  6. Urbanization, Specialization and the Future of Magazines.

    Burd, Gene

    Magazine journalism is not dead, despite the demise of many giant publications, but is thriving in new forms on the threshold of a new era whose trademark is urbanism. New publications recently appearing are primarily special audience magazines designed to fill the specific information needs of new groupings of readers. Since most of these new…

  7. Analysis of the contents of German magazines for tumor patients.

    Hübner, Jutta; Münstedt, Karsten; Senf, Bianca; Micke, Oliver

    2013-01-01

    Cancer patients have high information needs. Besides direct discussion with the physician, media provide important access to information. In the age of the internet, print media are still being used by many patients. In Germany, several magazines for cancer patients are distributed at no cost to cancer institutions for display. The aim of our study was to assess the content of these magazines. In a first step, a search of the literature concerning patient information needs and evaluation of patient information was done. This search revealed important criteria for evaluation. 2 instruments are recognized internationally as appropriate in evaluating and certifying patient information: HONcode and DISCERN. As we did not find an instrument for the evaluation of patient magazines, we combined the central items from both instruments. With this new instrument, we assessed the 2010 issues of all 5 magazines . The Krebsmagazin offers a vast range of different topics in cancer and thus aims at general patient education, irrespective of the level of knowledge. Befund Krebs offers a wider variety of topics in each issue. Understanding the articles requires basic knowledge. The same applies to Leben? Leben! which specifically addresses the topic of breast cancer. All 3 journals provide information in line with evidence-based medicine. K Journal - Mensch & Krebs provides information on conventional as well as alternative treatments, the latter not being evidence-based. Several issues contained both advertisements and articles by providers of alternative therapies. Signal only deals with alternative medicine in cancer care and does not provide scientifically proven data. As our analysis shows, content and evidence vary greatly in the magazines currently distributed in Germany. Physicians should familiarize themselves with the characteristics of the different journals before recommending them. Copyright © 2013 S. Karger AG, Basel.

  8. Learning Apache Solr high performance

    Mohan, Surendra

    2014-01-01

    This book is an easy-to-follow guide, full of hands-on, real-world examples. Each topic is explained and demonstrated in a specific and user-friendly flow, from search optimization using Solr to Deployment of Zookeeper applications. This book is ideal for Apache Solr developers and want to learn different techniques to optimize Solr performance with utmost efficiency, along with effectively troubleshooting the problems that usually occur while trying to boost performance. Familiarity with search servers and database querying is expected.

  9. High-performance composite chocolate

    Dean, Julian; Thomson, Katrin; Hollands, Lisa; Bates, Joanna; Carter, Melvyn; Freeman, Colin; Kapranos, Plato; Goodall, Russell

    2013-07-01

    The performance of any engineering component depends on and is limited by the properties of the material from which it is fabricated. It is crucial for engineering students to understand these material properties, interpret them and select the right material for the right application. In this paper we present a new method to engage students with the material selection process. In a competition-based practical, first-year undergraduate students design, cost and cast composite chocolate samples to maximize a particular performance criterion. The same activity could be adapted for any level of education to introduce the subject of materials properties and their effects on the material chosen for specific applications.

  10. High-Performance Composite Chocolate

    Dean, Julian; Thomson, Katrin; Hollands, Lisa; Bates, Joanna; Carter, Melvyn; Freeman, Colin; Kapranos, Plato; Goodall, Russell

    2013-01-01

    The performance of any engineering component depends on and is limited by the properties of the material from which it is fabricated. It is crucial for engineering students to understand these material properties, interpret them and select the right material for the right application. In this paper we present a new method to engage students with…

  11. Toward High-Performance Organizations.

    Lawler, Edward E., III

    2002-01-01

    Reviews management changes that companies have made over time in adopting or adapting four approaches to organizational performance: employee involvement, total quality management, re-engineering, and knowledge management. Considers future possibilities and defines a new view of what constitutes effective organizational design in management.…

  12. Functional High Performance Financial IT

    Berthold, Jost; Filinski, Andrzej; Henglein, Fritz

    2011-01-01

    at the University of Copenhagen that attacks this triple challenge of increased performance, transparency and productivity in the financial sector by a novel integration of financial mathematics, domain-specific language technology, parallel functional programming, and emerging massively parallel hardware. HIPERFIT......The world of finance faces the computational performance challenge of massively expanding data volumes, extreme response time requirements, and compute-intensive complex (risk) analyses. Simultaneously, new international regulatory rules require considerably more transparency and external...... auditability of financial institutions, including their software systems. To top it off, increased product variety and customisation necessitates shorter software development cycles and higher development productivity. In this paper, we report about HIPERFIT, a recently etablished strategic research center...

  13. High performance Mo adsorbent PZC

    Anon,

    1998-10-01

    We have developed Mo adsorbents for natural Mo(n, {gamma}){sup 99}Mo-{sup 99m}Tc generator. Among them, we called the highest performance adsorbent PZC that could adsorb about 250 mg-Mo/g. In this report, we will show the structure, adsorption mechanism of Mo, and the other useful properties of PZC when you carry out the examination of Mo adsorption and elution of {sup 99m}Tc. (author)

  14. Indoor Air Quality in High Performance Schools

    High performance schools are facilities that improve the learning environment while saving energy, resources, and money. The key is understanding the lifetime value of high performance schools and effectively managing priorities, time, and budget.

  15. High performance inertial fusion targets

    Nuckolls, J.H.; Bangerter, R.O.; Lindl, J.D.; Mead, W.C.; Pan, Y.L.

    1977-01-01

    Inertial confinement fusion (ICF) designs are considered which may have very high gains (approximately 1000) and low power requirements (<100 TW) for input energies of approximately one megajoule. These include targets having very low density shells, ultra thin shells, central ignitors, magnetic insulation, and non-ablative acceleration

  16. High performance inertial fusion targets

    Nuckolls, J.H.; Bangerter, R.O.; Lindl, J.D.; Mead, W.C.; Pan, Y.L.

    1978-01-01

    Inertial confinement fusion (ICF) target designs are considered which may have very high gains (approximately 1000) and low power requirements (< 100 TW) for input energies of approximately one megajoule. These include targets having very low density shells, ultra thin shells, central ignitors, magnetic insulation, and non-ablative acceleration

  17. High performance nuclear fuel element

    Mordarski, W.J.; Zegler, S.T.

    1980-01-01

    A fuel-pellet composition is disclosed for use in fast breeder reactors. Uranium carbide particles are mixed with a powder of uraniumplutonium carbides having a stable microstructure. The resulting mixture is formed into fuel pellets. The pellets thus produced exhibit a relatively low propensity to swell while maintaining a high density

  18. 46 CFR 108.651 - Portable magazine chests.

    2010-10-01

    ... 46 Shipping 4 2010-10-01 2010-10-01 false Portable magazine chests. 108.651 Section 108.651... AND EQUIPMENT Equipment Markings and Instructions § 108.651 Portable magazine chests. Each portable magazine chest must be marked: “PORTABLE MAGAZINE CHEST—FLAMMABLE—KEEP LIGHTS AND FIRE AWAY” in letters at...

  19. 27 CFR 555.63 - Explosives magazine changes.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Explosives magazine... § 555.63 Explosives magazine changes. (a) General. (1) The requirements of this section are applicable to magazines used for other than temporary (under 24 hours) storage of explosives. (2) A magazine is...

  20. Subscribe to NIH MedlinePlus the Magazine

    ... turn Javascript on. Subscribe to NIH MedlinePlus the magazine NIH MedlinePlus the magazine is published quarterly, in print and on the ... up for a free subscription to NIH MedlinePlus Magazine. Librarians may order this magazine in bulk . Please ...

  1. Preaching Our Practice: On Sharing Professional Work with Magazine Students.

    Mandelbaum, Paul

    A magazine writer and university instructor used interview samples, editors' comments, and other materials from his own article-then-in-progress for the "New York Times Magazine" in a university-level class in magazine writing. Students, who were creating their own in-depth magazine articles, could see the same principles and techniques…

  2. 27 CFR 555.208 - Construction of type 2 magazines.

    2010-04-01

    ... magazines. 555.208 Section 555.208 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 2 magazines. A type 2 magazine is a box, trailer, semitrailer, or other mobile facility. (a) Outdoor magazines—(1) General. Outdoor magazines are to be bullet-resistant, fire-resistant...

  3. 27 CFR 555.210 - Construction of type 4 magazines.

    2010-04-01

    ... magazines. 555.210 Section 555.210 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 4 magazines. A type 4 magazine is a building, igloo or “Army-type structure”, tunnel, dugout, box, trailer, or a semitrailer or other mobile magazine. (a) Outdoor magazines—(1) General...

  4. 27 CFR 555.204 - Inspection of magazines.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Inspection of magazines... of magazines. Any person storing explosive materials shall inspect his magazines at least every seven... been unauthorized entry or attempted entry into the magazines, or unauthorized removal of the contents...

  5. High Performance JavaScript

    Zakas, Nicholas

    2010-01-01

    If you're like most developers, you rely heavily on JavaScript to build interactive and quick-responding web applications. The problem is that all of those lines of JavaScript code can slow down your apps. This book reveals techniques and strategies to help you eliminate performance bottlenecks during development. You'll learn how to improve execution time, downloading, interaction with the DOM, page life cycle, and more. Yahoo! frontend engineer Nicholas C. Zakas and five other JavaScript experts -- Ross Harmes, Julien Lecomte, Steven Levithan, Stoyan Stefanov, and Matt Sweeney -- demonstra

  6. Carpet Aids Learning in High Performance Schools

    Hurd, Frank

    2009-01-01

    The Healthy and High Performance Schools Act of 2002 has set specific federal guidelines for school design, and developed a federal/state partnership program to assist local districts in their school planning. According to the Collaborative for High Performance Schools (CHPS), high-performance schools are, among other things, healthy, comfortable,…

  7. Adolescent exposure to alcohol advertising in magazines: an evaluation of advertising placement in relation to underage youth readership.

    King, Charles; Siegel, Michael; Jernigan, David H; Wulach, Laura; Ross, Craig; Dixon, Karen; Ostroff, Joshua

    2009-12-01

    To investigate whether alcoholic beverages popular among underage youths are more likely than those less popular among these youths to be advertised in magazines with high underage youth readerships. We compared the alcohol advertisement placement in 118 magazines during the period 2002 to 2006 for alcoholic beverages popular among youths to that of alcoholic beverages less likely to be consumed by youths. Using a random effects probit model, we examined the relationship between a magazine's youth (ages 12-20) readership and the probability of youth or nonyouth alcoholic beverage types being advertised in a magazine, controlling for young adult (ages 21-34) readership, cost of advertising, and other factors. Youth alcoholic beverage types were significantly more likely to be advertised in magazines with higher youth readership. Holding all other variables constant, the ratio of the probability of a youth alcoholic beverage type being advertised to that of a nonyouth alcoholic beverage type being advertised in a given magazine increased from 1.5 to 4.6 as youth readership increased from 0% to 40%. In magazines with the highest levels of youth readership, youth alcoholic beverage types were more than four times more likely to be advertised than nonyouth alcoholic beverage types. Alcoholic beverages popular among underage youths are more likely than those less popular among youths to be advertised in magazines with high youth readerships.

  8. High performance electromagnetic simulation tools

    Gedney, Stephen D.; Whites, Keith W.

    1994-10-01

    Army Research Office Grant #DAAH04-93-G-0453 has supported the purchase of 24 additional compute nodes that were installed in the Intel iPsC/860 hypercube at the Univesity Of Kentucky (UK), rendering a 32-node multiprocessor. This facility has allowed the investigators to explore and extend the boundaries of electromagnetic simulation for important areas of defense concerns including microwave monolithic integrated circuit (MMIC) design/analysis and electromagnetic materials research and development. The iPSC/860 has also provided an ideal platform for MMIC circuit simulations. A number of parallel methods based on direct time-domain solutions of Maxwell's equations have been developed on the iPSC/860, including a parallel finite-difference time-domain (FDTD) algorithm, and a parallel planar generalized Yee-algorithm (PGY). The iPSC/860 has also provided an ideal platform on which to develop a 'virtual laboratory' to numerically analyze, scientifically study and develop new types of materials with beneficial electromagnetic properties. These materials simulations are capable of assembling hundreds of microscopic inclusions from which an electromagnetic full-wave solution will be obtained in toto. This powerful simulation tool has enabled research of the full-wave analysis of complex multicomponent MMIC devices and the electromagnetic properties of many types of materials to be performed numerically rather than strictly in the laboratory.

  9. High-Performance Data Converters

    Steensgaard-Madsen, Jesper

    -resolution internal D/A converters are required. Unit-element mismatch-shaping D/A converters are analyzed, and the concept of mismatch-shaping is generalized to include scaled-element D/A converters. Several types of scaled-element mismatch-shaping D/A converters are proposed. Simulations show that, when implemented...... in a standard CMOS technology, they can be designed to yield 100 dB performance at 10 times oversampling. The proposed scaled-element mismatch-shaping D/A converters are well suited for use as the feedback stage in oversampled delta-sigma quantizers. It is, however, not easy to make full use of their potential......-order difference of the output signal from the loop filter's first integrator stage. This technique avoids the need for accurate matching of analog and digital filters that characterizes the MASH topology, and it preserves the signal-band suppression of quantization errors. Simulations show that quantizers...

  10. High performance soft magnetic materials

    2017-01-01

    This book provides comprehensive coverage of the current state-of-the-art in soft magnetic materials and related applications, with particular focus on amorphous and nanocrystalline magnetic wires and ribbons and sensor applications. Expert chapters cover preparation, processing, tuning of magnetic properties, modeling, and applications. Cost-effective soft magnetic materials are required in a range of industrial sectors, such as magnetic sensors and actuators, microelectronics, cell phones, security, automobiles, medicine, health monitoring, aerospace, informatics, and electrical engineering. This book presents both fundamentals and applications to enable academic and industry researchers to pursue further developments of these key materials. This highly interdisciplinary volume represents essential reading for researchers in materials science, magnetism, electrodynamics, and modeling who are interested in working with soft magnets. Covers magnetic microwires, sensor applications, amorphous and nanocrystalli...

  11. High performance polyethylene nanocomposite fibers

    A. Dorigato

    2012-12-01

    Full Text Available A high density polyethylene (HDPE matrix was melt compounded with 2 vol% of dimethyldichlorosilane treated fumed silica nanoparticles. Nanocomposite fibers were prepared by melt spinning through a co-rotating twin screw extruder and drawing at 125°C in air. Thermo-mechanical and morphological properties of the resulting fibers were then investigated. The introduction of nanosilica improved the drawability of the fibers, allowing the achievement of higher draw ratios with respect to the neat matrix. The elastic modulus and creep stability of the fibers were remarkably improved upon nanofiller addition, with a retention of the pristine tensile properties at break. Transmission electronic microscope (TEM images evidenced that the original morphology of the silica aggregates was disrupted by the applied drawing.

  12. HIGH-PERFORMANCE COATING MATERIALS

    SUGAMA,T.

    2007-01-01

    Corrosion, erosion, oxidation, and fouling by scale deposits impose critical issues in selecting the metal components used at geothermal power plants operating at brine temperatures up to 300 C. Replacing these components is very costly and time consuming. Currently, components made of titanium alloy and stainless steel commonly are employed for dealing with these problems. However, another major consideration in using these metals is not only that they are considerably more expensive than carbon steel, but also the susceptibility of corrosion-preventing passive oxide layers that develop on their outermost surface sites to reactions with brine-induced scales, such as silicate, silica, and calcite. Such reactions lead to the formation of strong interfacial bonds between the scales and oxide layers, causing the accumulation of multiple layers of scales, and the impairment of the plant component's function and efficacy; furthermore, a substantial amount of time is entailed in removing them. This cleaning operation essential for reusing the components is one of the factors causing the increase in the plant's maintenance costs. If inexpensive carbon steel components could be coated and lined with cost-effective high-hydrothermal temperature stable, anti-corrosion, -oxidation, and -fouling materials, this would improve the power plant's economic factors by engendering a considerable reduction in capital investment, and a decrease in the costs of operations and maintenance through optimized maintenance schedules.

  13. Delivering high performance BWR fuel reliably

    Schardt, J.F.

    1998-01-01

    Utilities are under intense pressure to reduce their production costs in order to compete in the increasingly deregulated marketplace. They need fuel, which can deliver high performance to meet demanding operating strategies. GE's latest BWR fuel design, GE14, provides that high performance capability. GE's product introduction process assures that this performance will be delivered reliably, with little risk to the utility. (author)

  14. CCR Magazines | Center for Cancer Research

    The Center for Cancer Research (CCR) has two magazines, MILESTONES and LANDMARKS, that highlight our annual advances and top contributions to the understanding, detection, treatment and prevention of cancer over the years.

  15. Advertising of toothpaste in parenting magazines.

    Basch, Corey H; Hammond, Rodney; Guinta, Alexis; Rajan, Sonali; Basch, Charles E

    2013-10-01

    We assessed advertisements for children's toothpaste in two widely read US parenting magazines. Data on the number and type of toothpaste advertisements in two parenting magazines were collected from 116 magazine issues between 2007 and 2011. The number of children's toothpaste advertisements per year and across magazines was computed. The amount of toothpaste presented in each advertisement was categorized. We noted whether the toothpaste advertisement stated that the toothpaste was fluoridated. We identified a total of 117 children's toothpaste advertisements in these magazines and confirmed that the majority of the magazine issues contained at least one toothpaste advertisement. Of the 31 advertisements that depicted a picture of a toothbrush with toothpaste, all but one (96.8 %) depicted a full swirl of toothpaste covering the entire toothbrush head, which is well over the recommended amount. The pictures on the advertisements show an excessive amount of toothpaste on the brush, which directly conflicts with the instructions on many toothpastes and dentist recommendations. Those advertisements with photographs that depict a toothbrush with a full brush head of toothpaste are showing over four times the recommended amount for children.

  16. High performance carbon nanocomposites for ultracapacitors

    Lu, Wen

    2012-10-02

    The present invention relates to composite electrodes for electrochemical devices, particularly to carbon nanotube composite electrodes for high performance electrochemical devices, such as ultracapacitors.

  17. Strategies and Experiences Using High Performance Fortran

    Shires, Dale

    2001-01-01

    .... High performance Fortran (HPF) is a relative new addition to the Fortran dialect It is an attempt to provide an efficient high-level Fortran parallel programming language for the latest generation of been debatable...

  18. Prostate and Colon Cancer Screening Messages in Popular Magazines

    Katz, Mira L; Sheridan, Stacey; Pignone, Michael; Lewis, Carmen; Battle, Jamila; Gollop, Claudia; O'Malley, Michael

    2004-01-01

    OBJECTIVES To 1) compare the number of articles published about prostate, colon, and breast cancer in popular magazines during the past 2 decades, and 2) evaluate the content of in-depth prostate and colon cancer screening articles identified from 1996 to 2001. DESIGN We used a searchable database to identify the number of prostate, colon, and breast cancer articles published in three magazines with the highest circulation from six categories. In addition, we performed a systematic review on the in-depth (≥2 pages) articles on prostate and colon cancer screening that appeared from 1996 through 2001. RESULTS Although the number of magazine articles on prostate and colon cancer published in the 1990s increased compared to the 1980s, the number of articles is approximately one third of breast cancer articles. There were 36 in-depth articles from 1996 to 2001 in which prostate or colon cancer screening were mentioned. Over 90% of the articles recommended screening. However, of those articles, only 76% (25/33; 95% confidence interval [CI], 58% to 89%) cited screening guidelines. The benefits of screening were mentioned in 89% (32/36; 95% CI, 74% to 97%) but the harms were only found in 58% (21/36; 95% CI, 41% to 75%). Only 28% (10/36; 95% CI, 14% to 45%) of the articles provided all the necessary information needed for the reader to make an informed decision. CONCLUSIONS In-depth articles about prostate and colon cancer in popular magazines do not appear as frequently as articles about breast cancer. The available articles on prostate and colon cancer screening often do not provide the information necessary for the reader to make an informed decision about screening. PMID:15242469

  19. High Performance Grinding and Advanced Cutting Tools

    Jackson, Mark J

    2013-01-01

    High Performance Grinding and Advanced Cutting Tools discusses the fundamentals and advances in high performance grinding processes, and provides a complete overview of newly-developing areas in the field. Topics covered are grinding tool formulation and structure, grinding wheel design and conditioning and applications using high performance grinding wheels. Also included are heat treatment strategies for grinding tools, using grinding tools for high speed applications, laser-based and diamond dressing techniques, high-efficiency deep grinding, VIPER grinding, and new grinding wheels.

  20. Strategy Guideline: High Performance Residential Lighting

    Holton, J.

    2012-02-01

    The Strategy Guideline: High Performance Residential Lighting has been developed to provide a tool for the understanding and application of high performance lighting in the home. The high performance lighting strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner's expectations for high quality lighting.

  1. Carbon nanomaterials for high-performance supercapacitors

    Tao Chen; Liming Dai

    2013-01-01

    Owing to their high energy density and power density, supercapacitors exhibit great potential as high-performance energy sources for advanced technologies. Recently, carbon nanomaterials (especially, carbon nanotubes and graphene) have been widely investigated as effective electrodes in supercapacitors due to their high specific surface area, excellent electrical and mechanical properties. This article summarizes the recent progresses on the development of high-performance supercapacitors bas...

  2. Team Development for High Performance Management.

    Schermerhorn, John R., Jr.

    1986-01-01

    The author examines a team development approach to management that creates shared commitments to performance improvement by focusing the attention of managers on individual workers and their task accomplishments. It uses the "high-performance equation" to help managers confront shared beliefs and concerns about performance and develop realistic…

  3. Delivering high performance BWR fuel reliably

    Schardt, J.F. [GE Nuclear Energy, Wilmington, NC (United States)

    1998-07-01

    Utilities are under intense pressure to reduce their production costs in order to compete in the increasingly deregulated marketplace. They need fuel, which can deliver high performance to meet demanding operating strategies. GE's latest BWR fuel design, GE14, provides that high performance capability. GE's product introduction process assures that this performance will be delivered reliably, with little risk to the utility. (author)

  4. HPTA: High-Performance Text Analytics

    Vandierendonck, Hans; Murphy, Karen; Arif, Mahwish; Nikolopoulos, Dimitrios S.

    2017-01-01

    One of the main targets of data analytics is unstructured data, which primarily involves textual data. High-performance processing of textual data is non-trivial. We present the HPTA library for high-performance text analytics. The library helps programmers to map textual data to a dense numeric representation, which can be handled more efficiently. HPTA encapsulates three performance optimizations: (i) efficient memory management for textual data, (ii) parallel computation on associative dat...

  5. Pantex Plant final safety analysis report, Zone 4 magazines. Staging or interim storage for nuclear weapons and components: Issue D

    1993-04-01

    This Safety Analysis Report (SAR) contains a detailed description and evaluation of the significant environmental, safety, and health (ES&H) issues associated with the operations of the Pantex Plant modified-Richmond and steel arch construction (SAC) magazines in Zone 4. It provides (1) an overall description of the magazines, the Pantex Plant, and its surroundings; (2) a systematic evaluations of the hazards that could occur as a result of the operations performed in these magazines; (3) descriptions and analyses of the adequacy of the measures taken to eliminate, control, or mitigate the identified hazards; and (4) analyses of potential accidents and their associated risks.

  6. What does cancer treatment look like in consumer cancer magazines? An exploratory analysis of photographic content in consumer cancer magazines.

    Phillips, Selene G; Della, Lindsay J; Sohn, Steve H

    2011-04-01

    In an exploratory analysis of several highly circulated consumer cancer magazines, the authors evaluated congruency between visual images of cancer patients and target audience risk profile. The authors assessed 413 images of cancer patients/potential patients for demographic variables such as age, gender, and ethnicity/race. They compared this profile with actual risk statistics. The images in the magazines are considerably younger, more female, and more White than what is indicated by U.S. cancer risk statistics. The authors also assessed images for visual signs of cancer testing/diagnosis and treatment. Few individuals show obvious signs of cancer treatment (e.g., head scarves, skin/nail abnormalities, thin body types). Most images feature healthier looking people, some actively engaged in construction work, bicycling, and yoga. In contrast, a scan of the editorial content showed that nearly two thirds of the articles focus on treatment issues. To explicate the implications of this imagery-text discontinuity on readers' attention and cognitive processing, the authors used constructs from information processing and social identity theories. On the basis of these models/theories, the authors provide recommendations for consumer cancer magazines, suggesting that the imagery be adjusted to reflect cancer diagnosis realities for enhanced message attention and comprehension.

  7. Strategy Guideline. Partnering for High Performance Homes

    Prahl, Duncan [IBACOS, Inc., Pittsburgh, PA (United States)

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. This guide is intended for use by all parties associated in the design and construction of high performance homes. It serves as a starting point and features initial tools and resources for teams to collaborate to continually improve the energy efficiency and durability of new houses.

  8. Variations in food and drink advertising in UK monthly women's magazines according to season, magazine type and socio-economic profile of readers: a descriptive study of publications over 12 months.

    Adams, Jean; Simpson, Emma; White, Martin

    2011-05-23

    Overweight and obesity are recognised nationally and internationally as key public health challenges. Food and drink advertising is one of the array of factors that influence both diet and physical activity choices and, hence, body weight and obesity. Little previous work has focused on food and drink advertising in magazines. We studied food and drink advertising in a wide range of popular UK monthly women's magazines published over a full year. We explored differences in the prevalence of food and drink advertising and the type of food and drinks advertised according to season, magazine type and socio-economic profile of readers. All advertisements in all issues of 18 popular UK monthly women's magazines published over 12 months were identified. For each food or drink advertisement, branded food and drinks were noted and categorised into one of seven food groups. All analyses were at the level of the individual advertisement. A total of 35 053 advertisements were identified; 1380 (3.9%) of these were for food or drink. The most common food group represented was 'food and drinks high in fat and/or sugar' (28.0% of food advertisements), the least common group was 'fruits & vegetables' (2.0% of food advertisements). Advertisements for alcohol accounted for 10.1% of all food advertisements. Food and drink advertisements were most common in summer, general interest magazines, and those with the most affluent readerships. There were some differences in the type of food and drink advertised across season, magazine type and socio-economic profile of readers. Food and drink advertisements represented only a small proportion of advertisements in UK women's monthly magazines. Food and drink advertisements in these magazines feature a high proportion of 'less healthy' foods. There were a number of differences across season, magazine type and according to the socio-economic profile of readers in the prevalence of food and drink advertisements. Fewer differences were seen in

  9. High-performance ceramics. Fabrication, structure, properties

    Petzow, G.; Tobolski, J.; Telle, R.

    1996-01-01

    The program ''Ceramic High-performance Materials'' pursued the objective to understand the chaining of cause and effect in the development of high-performance ceramics. This chain of problems begins with the chemical reactions for the production of powders, comprises the characterization, processing, shaping and compacting of powders, structural optimization, heat treatment, production and finishing, and leads to issues of materials testing and of a design appropriate to the material. The program ''Ceramic High-performance Materials'' has resulted in contributions to the understanding of fundamental interrelationships in terms of materials science, which are summarized in the present volume - broken down into eight special aspects. (orig./RHM)

  10. High Burnup Fuel Performance and Safety Research

    Bang, Je Keun; Lee, Chan Bok; Kim, Dae Ho (and others)

    2007-03-15

    The worldwide trend of nuclear fuel development is to develop a high burnup and high performance nuclear fuel with high economies and safety. Because the fuel performance evaluation code, INFRA, has a patent, and the superiority for prediction of fuel performance was proven through the IAEA CRP FUMEX-II program, the INFRA code can be utilized with commercial purpose in the industry. The INFRA code was provided and utilized usefully in the universities and relevant institutes domesticallly and it has been used as a reference code in the industry for the development of the intrinsic fuel rod design code.

  11. ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS

    WONG, CPC; MALANG, S; NISHIO, S; RAFFRAY, R; SAGARA, S

    2002-01-01

    OAK A271 ADVANCED HIGH PERFORMANCE SOLID WALL BLANKET CONCEPTS. First wall and blanket (FW/blanket) design is a crucial element in the performance and acceptance of a fusion power plant. High temperature structural and breeding materials are needed for high thermal performance. A suitable combination of structural design with the selected materials is necessary for D-T fuel sufficiency. Whenever possible, low afterheat, low chemical reactivity and low activation materials are desired to achieve passive safety and minimize the amount of high-level waste. Of course the selected fusion FW/blanket design will have to match the operational scenarios of high performance plasma. The key characteristics of eight advanced high performance FW/blanket concepts are presented in this paper. Design configurations, performance characteristics, unique advantages and issues are summarized. All reviewed designs can satisfy most of the necessary design goals. For further development, in concert with the advancement in plasma control and scrape off layer physics, additional emphasis will be needed in the areas of first wall coating material selection, design of plasma stabilization coils, consideration of reactor startup and transient events. To validate the projected performance of the advanced FW/blanket concepts the critical element is the need for 14 MeV neutron irradiation facilities for the generation of necessary engineering design data and the prediction of FW/blanket components lifetime and availability

  12. Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine

    ... Issues Mary Tyler Moore Helps Launch NIH MedlinePlus Magazine Past Issues / Winter 2007 Table of Contents For ... Javascript on. Among those attending the NIH MedlinePlus magazine launch on Capitol Hill were (l-r) NIH ...

  13. NIH MedlinePlus the Magazine: Health, Medical & Wellness Articles

    ... to the Web site for NIH MedlinePlus, the magazine. Our purpose is to present you with the ... sponsorship and other charitable donations for NIH MedlinePlus magazine's publication and distribution, many more thousands of Americans ...

  14. Remembering Mary Tyler Moore | MedlinPlus Magazine

    ... Remembering Mary Tyler Moore Follow us NIH MedlinePlus Magazine Remembers Mary Tyler Moore A little more than ... helped launch the first issue of NIH MedlinePlus magazine on Capitol Hill. The award-winning actress and ...

  15. High performance liquid chromatographic determination of ...

    STORAGESEVER

    2010-02-08

    ) high performance liquid chromatography (HPLC) grade .... applications. These are important requirements if the reagent is to be applicable to on-line pre or post column derivatisation in a possible automation of the analytical.

  16. Analog circuit design designing high performance amplifiers

    Feucht, Dennis

    2010-01-01

    The third volume Designing High Performance Amplifiers applies the concepts from the first two volumes. It is an advanced treatment of amplifier design/analysis emphasizing both wideband and precision amplification.

  17. High-performance computing using FPGAs

    Benkrid, Khaled

    2013-01-01

    This book is concerned with the emerging field of High Performance Reconfigurable Computing (HPRC), which aims to harness the high performance and relative low power of reconfigurable hardware–in the form Field Programmable Gate Arrays (FPGAs)–in High Performance Computing (HPC) applications. It presents the latest developments in this field from applications, architecture, and tools and methodologies points of view. We hope that this work will form a reference for existing researchers in the field, and entice new researchers and developers to join the HPRC community.  The book includes:  Thirteen application chapters which present the most important application areas tackled by high performance reconfigurable computers, namely: financial computing, bioinformatics and computational biology, data search and processing, stencil computation e.g. computational fluid dynamics and seismic modeling, cryptanalysis, astronomical N-body simulation, and circuit simulation.     Seven architecture chapters which...

  18. Embedded High Performance Scalable Computing Systems

    Ngo, David

    2003-01-01

    The Embedded High Performance Scalable Computing Systems (EHPSCS) program is a cooperative agreement between Sanders, A Lockheed Martin Company and DARPA that ran for three years, from Apr 1995 - Apr 1998...

  19. Gradient High Performance Liquid Chromatography Method ...

    Purpose: To develop a gradient high performance liquid chromatography (HPLC) method for the simultaneous determination of phenylephrine (PHE) and ibuprofen (IBU) in solid ..... nimesulide, phenylephrine. Hydrochloride, chlorpheniramine maleate and caffeine anhydrous in pharmaceutical dosage form. Acta Pol.

  20. Highlighting High Performance: Whitman Hanson Regional High School; Whitman, Massachusetts

    2006-06-01

    This brochure describes the key high-performance building features of the Whitman-Hanson Regional High School. The brochure was paid for by the Massachusetts Technology Collaborative as part of their Green Schools Initiative. High-performance features described are daylighting and energy-efficient lighting, indoor air quality, solar and wind energy, building envelope, heating and cooling systems, water conservation, and acoustics. Energy cost savings are also discussed.

  1. High performance computing in Windows Azure cloud

    Ambruš, Dejan

    2013-01-01

    High performance, security, availability, scalability, flexibility and lower costs of maintenance have essentially contributed to the growing popularity of cloud computing in all spheres of life, especially in business. In fact cloud computing offers even more than this. With usage of virtual computing clusters a runtime environment for high performance computing can be efficiently implemented also in a cloud. There are many advantages but also some disadvantages of cloud computing, some ...

  2. High-performance computing — an overview

    Marksteiner, Peter

    1996-08-01

    An overview of high-performance computing (HPC) is given. Different types of computer architectures used in HPC are discussed: vector supercomputers, high-performance RISC processors, various parallel computers like symmetric multiprocessors, workstation clusters, massively parallel processors. Software tools and programming techniques used in HPC are reviewed: vectorizing compilers, optimization and vector tuning, optimization for RISC processors; parallel programming techniques like shared-memory parallelism, message passing and data parallelism; and numerical libraries.

  3. Modalization in the Political Column of Tempo Magazine

    Rahmah, Maria Betti Sinaga and

    2017-01-01

    The study focuses on analyzing the use of modalization in the Political Column of Tempo Magazine. The objectives were to find out the type of modalization and to describe the use of modalization in the Political Column of Tempo magazine. The data were taken from Political Column of Tempo magazine published in June and July 2017. The source of data was Political Column in Tempo magazine. The data analysis applied descriptive qualitative research. There were 135 clauses which contained Modaliza...

  4. Governance among Malaysian high performing companies

    Asri Marsidi

    2016-07-01

    Full Text Available Well performed companies have always been linked with effective governance which is generally reflected through effective board of directors. However many issues concerning the attributes for effective board of directors remained unresolved. Nowadays diversity has been perceived as able to influence the corporate performance due to the likelihood of meeting variety of needs and demands from diverse customers and clients. The study therefore aims to provide a fundamental understanding on governance among high performing companies in Malaysia.

  5. High-performance OPCPA laser system

    Zuegel, J.D.; Bagnoud, V.; Bromage, J.; Begishev, I.A.; Puth, J.

    2006-01-01

    Optical parametric chirped-pulse amplification (OPCPA) is ideally suited for amplifying ultra-fast laser pulses since it provides broadband gain across a wide range of wavelengths without many of the disadvantages of regenerative amplification. A high-performance OPCPA system has been demonstrated as a prototype for the front end of the OMEGA Extended Performance (EP) Laser System. (authors)

  6. High-performance OPCPA laser system

    Zuegel, J.D.; Bagnoud, V.; Bromage, J.; Begishev, I.A.; Puth, J. [Rochester Univ., Lab. for Laser Energetics, NY (United States)

    2006-06-15

    Optical parametric chirped-pulse amplification (OPCPA) is ideally suited for amplifying ultra-fast laser pulses since it provides broadband gain across a wide range of wavelengths without many of the disadvantages of regenerative amplification. A high-performance OPCPA system has been demonstrated as a prototype for the front end of the OMEGA Extended Performance (EP) Laser System. (authors)

  7. Comparing Dutch and British high performing managers

    Waal, A.A. de; Heijden, B.I.J.M. van der; Selvarajah, C.; Meyer, D.

    2016-01-01

    National cultures have a strong influence on the performance of organizations and should be taken into account when studying the traits of high performing managers. At the same time, many studies that focus upon the attributes of successful managers show that there are attributes that are similar

  8. Screen Time: Alumni Magazines Have Their Designs on Mobile Devices

    Walker, Theresa

    2011-01-01

    Alumni magazines have their designs on mobile devices. The efforts are tied together, no matter the platform, by a desire for the magazine to be where its readers are and a spirit of experimentation that is akin to what is happening with social media. None of the magazine editors went into this process with any numerical expectations for…

  9. 49 CFR 176.130 - Magazine stowage Type A.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Magazine stowage Type A. 176.130 Section 176.130... Requirements for Class 1 (Explosive) Materials Stowage § 176.130 Magazine stowage Type A. (a) In addition to protecting the Class 1 (explosive) materials and preventing unauthorized access, magazine stowage type A...

  10. 49 CFR 176.133 - Magazine stowage Type C.

    2010-10-01

    ... 49 Transportation 2 2010-10-01 2010-10-01 false Magazine stowage Type C. 176.133 Section 176.133... Requirements for Class 1 (Explosive) Materials Stowage § 176.133 Magazine stowage Type C. The construction requirements for magazine stowage type C are the same as for a closed cargo transport unit in § 176.63(e). In...

  11. 27 CFR 555.127 - Daily summary of magazine transactions.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Daily summary of magazine....127 Daily summary of magazine transactions. In taking the inventory required by §§ 555.122, 555.123... transactions to be kept at each magazine of an approved storage facility; however, these records may be kept at...

  12. City Magazines Find a Niche in the Media Marketplace.

    Fletcher, Alan D.

    The responses of 36 publishers and editors of city magazines--magazines such as "Chicago,""MPLS," and "Texas Monthly" that are published primarily for a local or regional market--provided data for an analysis of the positioning of these magazines in the media marketplace, factors leading to their success, their…

  13. Custom magazines: where digital page-turn editions fail

    Schijns, J.M.C.; Smit, E.G.

    2010-01-01

    Threatened by the rise in paper, printing and postage costs, online custom magazines rejoice an increased interest. They are seen as a more efficient, but equivalent alternative to offline custom magazines. Most digital custom magazines, however, contain an electronic replica of the print version.

  14. 27 CFR 555.216 - Repair of magazines.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Repair of magazines. 555... EXPLOSIVES, DEPARTMENT OF JUSTICE EXPLOSIVES COMMERCE IN EXPLOSIVES Storage § 555.216 Repair of magazines. Before repairing the interior of magazines, all explosive materials are to be removed and the interior...

  15. 27 CFR 555.203 - Types of magazines.

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Types of magazines. 555... EXPLOSIVES, DEPARTMENT OF JUSTICE EXPLOSIVES COMMERCE IN EXPLOSIVES Storage § 555.203 Types of magazines. For purposes of this part, there are five types of magazines. These types, together with the classes of...

  16. 27 CFR 555.211 - Construction of type 5 magazines.

    2010-04-01

    ... magazines. 555.211 Section 555.211 Alcohol, Tobacco Products, and Firearms BUREAU OF ALCOHOL, TOBACCO... Construction of type 5 magazines. A type 5 magazine is a building, igloo or “Army-type structure”, tunnel, dugout, bin, box, trailer, or a semitrailer or other mobile facility. (a) Outdoor magazines—(1) General...

  17. Alcohol Advertising in Magazines and Underage Readership: Are Underage Youth Disproportionately Exposed?

    King, Charles; Siegel, Michael; Ross, Craig S; Jernigan, David H

    2017-10-01

    The question of whether underage youth are disproportionately exposed to alcohol advertising lies at the heart of the public health debate about whether restrictions on alcohol advertising are warranted. The aim of this study was to determine whether alcohol brands popular among underage (ages 12 to 20 years) drinkers ("underage brands") are more likely than others ("other brands") to advertise in magazines with high underage readerships. We analyze the advertising of 680 alcohol brands in 49 magazines between 2006 and 2011. Using a random effects probit model, we examine the relationship between a magazine's underage readership and the probability of an underage or other brand advertising in a magazine, controlling for young adult (ages 21 to 29 years) and total readerships, advertising costs and expenditures, and readership demographics. We find that underage brands are more likely than other brands to advertise in magazines with a higher percentage of underage readers. Holding all other variables constant at their sample means, the probability of an "other" brand advertising in a magazine remains essentially constant over the range of underage readership from 0.010 (95% confidence interval [CI], 0.007 to 0.013) at 5% to 0.012 (95% CI, 0.008 to 0.016) at 35%. In contrast, the probability of an underage brand advertising nearly quadruples, ranging from 0.025 (95% CI, 0.015 to 0.035) to 0.096 (95% CI, 0.057 to 0.135), where underage brands are 7.90 (95% CI, 3.89 to 11.90) times more likely than other brands to advertise. Alcohol brands popular among underage drinkers are more likely than other brands to advertise in magazines with high underage readerships, resulting in the disproportionate exposure of underage youth. Current voluntary advertising industry guidelines are not adequate to protect underage youth from high and disproportionate exposure to alcohol advertising in magazines. To limit advertising exposure among underage youth, policy makers may want to

  18. High Performance Work Systems for Online Education

    Contacos-Sawyer, Jonna; Revels, Mark; Ciampa, Mark

    2010-01-01

    The purpose of this paper is to identify the key elements of a High Performance Work System (HPWS) and explore the possibility of implementation in an online institution of higher learning. With the projected rapid growth of the demand for online education and its importance in post-secondary education, providing high quality curriculum, excellent…

  19. Teacher Accountability at High Performing Charter Schools

    Aguirre, Moises G.

    2016-01-01

    This study will examine the teacher accountability and evaluation policies and practices at three high performing charter schools located in San Diego County, California. Charter schools are exempted from many laws, rules, and regulations that apply to traditional school systems. By examining the teacher accountability systems at high performing…

  20. Advanced high performance solid wall blanket concepts

    Wong, C.P.C.; Malang, S.; Nishio, S.; Raffray, R.; Sagara, A.

    2002-01-01

    First wall and blanket (FW/blanket) design is a crucial element in the performance and acceptance of a fusion power plant. High temperature structural and breeding materials are needed for high thermal performance. A suitable combination of structural design with the selected materials is necessary for D-T fuel sufficiency. Whenever possible, low afterheat, low chemical reactivity and low activation materials are desired to achieve passive safety and minimize the amount of high-level waste. Of course the selected fusion FW/blanket design will have to match the operational scenarios of high performance plasma. The key characteristics of eight advanced high performance FW/blanket concepts are presented in this paper. Design configurations, performance characteristics, unique advantages and issues are summarized. All reviewed designs can satisfy most of the necessary design goals. For further development, in concert with the advancement in plasma control and scrape off layer physics, additional emphasis will be needed in the areas of first wall coating material selection, design of plasma stabilization coils, consideration of reactor startup and transient events. To validate the projected performance of the advanced FW/blanket concepts the critical element is the need for 14 MeV neutron irradiation facilities for the generation of necessary engineering design data and the prediction of FW/blanket components lifetime and availability

  1. Marketing plan for online surfing magazine

    Michna, Jakub

    2017-01-01

    Název: Marketing plan for online surfing magazine Cíle: The main aim of this thesis is to design a marketing plan for launching new online surfing magazine. This project would emerge from present online media Freeride.cz/Water, which adverse situation is going to be analyzed. Metody: Author used interviewing and personal survey as methods. Secondary data collection, PEST analysis and Google Analytics tool served as framework for resulting SWOT analysis. Výsledky: The marketing plan for one ye...

  2. (Non) value in women`s magazines

    Denisa Elena CHIRIŢĂ

    2012-01-01

    Dedicated to a specific audience, women willing to be professionally successful and financially independent, the current magazines for women tend to alter the feminism`s mission stated at the beginning of the XXth century. It seems that the “new woman”, promoted by those magazines, has a single purpose: not to hide anymore her sexuality. The pages dedicated to this „liberation” abound in diets, pieces of advice, testimonials of a “more exciting sex”1, daily sensuality, leading towards a new p...

  3. The Morphological Analysis Found in Tempo Magazine

    Lubis, Khairunnisa

    2015-01-01

    A paper entitled “The Morphological Analysis Found in Tempo Magazine” discussed about affixation process that is one of field linguistics, Morphology. The data of this research is five articles in Tempo magazine 1405/September 23-29, 2013. The scope of this writing is to find some kinds of prefixes and suffixes are used in Tempo magazine and to find what the dominant affix is. The method of research applied is descriptive qualitative. After analyzing the data, there are 5 kinds of prefixes, n...

  4. An investigation of content and media images in gay men's magazines.

    Saucier, Jason A; Caron, Sandra L

    2008-01-01

    This study provides an analysis of gay men's magazines, examining both the content and advertisements. Four magazine titles were selected, including The Advocate, Genre, Instinct, and Out, each targeting gay men as its target audience. These magazines were coded for both article content and advertisement content. In the advertisement analysis, both the type of advertisement and characteristics of the men depicted within the advertisement when present. The results mirror previous research findings relating to the portrayal of women, including the objectification of specific body parts and the high community standards set by the images depicted. These findings were reinforced by both the advertisements and content analyzed to include a high degree of importance being placed on having the right body type. Implications for further research are discussed.

  5. The Sandia/Arzamas-16 Magazine-to-Magazine Remote Monitoring Field Trial Evaluation

    Barkanov, Boris; Blagin, Sergei; Croessmann, Dennis; Damico, Joe; Ehle, Steve; Nilsen, Curt

    1999-01-01

    Sandia National Laboratories and the Russian Federal Nuclear Center-All Russian Research Institute for Experimental Physics (VNIIEF) (also known as Arzamas-16) are collaborating on ways to assure the highest standards of safety, security, and international accountability of fissile material. For these collaborations, sensors and information technologies have been identified as important in reaching these standards in a cost-effective manner. Specifically, Sandia and VNIIEF have established a series of remote monitoring field trials to provide a mechanism for joint research and development on storage monitoring systems. These efforts consist of the ''Container-to-Container'', ''Magazine-to-Magazine'', and ''Facility-to-Facility'' field trials. This paper will describe the evaluation exercise Sandia and VNIIEF conducted on the Magazine-to-Magazine systems. Topics covered will include a description of the evaluation philosophy, how the various sensors and system features were tested, evaluation results, and lessons learned

  6. The portrayal of infant feeding in British women's magazines: a qualitative and quantitative content analysis.

    O'Brien, E; Myles, P; Pritchard, C

    2017-06-01

    Exclusive breastfeeding is the best start an infant can receive. However, in many high-income countries breastfeeding rates are low and this may be a reflection of social norms which in turn may be influenced by the media. This study therefore explored the portrayal of infant feeding in women's general interest magazines. The five top selling women's weekly magazines in Britain and Ireland for 2013 over a 4-month period were included. A quantitative and qualitative content analysis was conducted for both written and visual content. In 58 magazines, there were 90 references to infant feeding with an average of 1.5 (range: 0-5) per magazine. Breastfeeding and formula feeding references were present in equal number and both were predominantly portrayed positively. There was only 1 visual representation of breast feeding compared with 11 of bottle feeding. Potential drivers for breastfeeding included its role in post-pregnancy weight loss and celebrity endorsement while family routine, the role of males in the house and concerns about adverse health effects were identified as barriers to breastfeeding. An improvement in visual representations of breast feeding and factual information in women's weekly magazines may be helpful in re-defining social norms regarding infant feeding. Keywords: food and nutrition, health promotion, public health. © The Author 2016. Published by Oxford University Press on behalf of Faculty of Public Health. All rights reserved. For permissions, please e-mail: journals.permissions@oup.com.

  7. High performance bio-integrated devices

    Kim, Dae-Hyeong; Lee, Jongha; Park, Minjoon

    2014-06-01

    In recent years, personalized electronics for medical applications, particularly, have attracted much attention with the rise of smartphones because the coupling of such devices and smartphones enables the continuous health-monitoring in patients' daily life. Especially, it is expected that the high performance biomedical electronics integrated with the human body can open new opportunities in the ubiquitous healthcare. However, the mechanical and geometrical constraints inherent in all standard forms of high performance rigid wafer-based electronics raise unique integration challenges with biotic entities. Here, we describe materials and design constructs for high performance skin-mountable bio-integrated electronic devices, which incorporate arrays of single crystalline inorganic nanomembranes. The resulting electronic devices include flexible and stretchable electrophysiology electrodes and sensors coupled with active electronic components. These advances in bio-integrated systems create new directions in the personalized health monitoring and/or human-machine interfaces.

  8. Designing a High Performance Parallel Personal Cluster

    Kapanova, K. G.; Sellier, J. M.

    2016-01-01

    Today, many scientific and engineering areas require high performance computing to perform computationally intensive experiments. For example, many advances in transport phenomena, thermodynamics, material properties, computational chemistry and physics are possible only because of the availability of such large scale computing infrastructures. Yet many challenges are still open. The cost of energy consumption, cooling, competition for resources have been some of the reasons why the scientifi...

  9. vSphere high performance cookbook

    Sarkar, Prasenjit

    2013-01-01

    vSphere High Performance Cookbook is written in a practical, helpful style with numerous recipes focusing on answering and providing solutions to common, and not-so common, performance issues and problems.The book is primarily written for technical professionals with system administration skills and some VMware experience who wish to learn about advanced optimization and the configuration features and functions for vSphere 5.1.

  10. CONSERVATIVE ATTITUDES TO OLD-ESTABLISHED ORGANS: OLIVER LODGE AND PHILOSOPHICAL MAGAZINE.

    Clarke, Imogen; Mussell, James

    2015-09-20

    In 1921 Oliver Lodge defended Philosophical Magazine against charges of mismanagement from the National Union of Scientific Workers. They alleged that its editors performed little editorial work, the bulk being done by the publishers, Taylor & Francis. Lodge reassured Nature's readers that the journal did consult its editors, and suggested 'a conservative attitude towards old-established organs is wise; and that it is possible to over-organise things into lifelessness.' The paper explores Lodge's response by considering the editorial arrangements at Philosophical Magazine. Founded in 1798, it remained remarkably unchanged and so appeared old-fashioned when compared with its closest rivals, Proceedings of the Royal Society and Proceedings of the Physical Society. We argue that for Lodge the management of Philosophical Magazine gave it the flexibility and independence required to sustain the kind of physics, also open to accusations of obsolescence, in which he believed.

  11. Food Advertisements in Two Popular U.S. Parenting Magazines: Results of a Five-Year Analysis

    Basch, Corey H.; Hammond, Rodney N.; Ethan, Danna; Samuel, Lalitha

    2013-01-01

    Obesity rates among American youth have prompted an examination of food advertisements geared towards children. Research indicates children?s high exposure to these advertisements and their influence on food preferences. Less is known about the presence of these advertisements in parenting magazines. This study?s objective was to examine prevalence of food advertisements in popular parenting magazines and identify products by USDA food category. We analyzed 116 issues of two popular U.S. pare...

  12. High performance parallel I/O

    Prabhat

    2014-01-01

    Gain Critical Insight into the Parallel I/O EcosystemParallel I/O is an integral component of modern high performance computing (HPC), especially in storing and processing very large datasets to facilitate scientific discovery. Revealing the state of the art in this field, High Performance Parallel I/O draws on insights from leading practitioners, researchers, software architects, developers, and scientists who shed light on the parallel I/O ecosystem.The first part of the book explains how large-scale HPC facilities scope, configure, and operate systems, with an emphasis on choices of I/O har

  13. Readership Study of an Agricultural Magazine.

    Holmes, Ted

    Since the fall of 1957, the Louisiana Agricultural Experiment Station has published a semi-scientific quarterly magazine, "Louisiana Agriculture," to present information on the station's research to Louisiana citizens, particularly public officials, members of the agribusiness sector, science-oriented farmers, agriculture and science…

  14. Inflation Metaphor in the TIME Magazine Corpus

    Hu, Chunyu; Liu, Huijie

    2016-01-01

    A historical perspective on economy metaphor can shed new lights on economic thoughts. Based on the TIME Magazine Corpus (TMC), this paper investigates inflation metaphor over 83 years and compares findings against the economic data over the relatively corresponding period. The results show how inflation, an abstract concept and a normal economic…

  15. Response to Gelman Comments in Chance Magazine

    Carl Blackman Letter to the Editor of Chance Magazine: I appreciate being given the opportunity to comment on an editorial column by Andrew Gelman, entitled "Ethics and Statistics", that appeared in 2011, volume 24, no. 4, pages 51-53, in which my colleagues and I and our 1988 ...

  16. WIRED magazine announces rave awards nominees

    2002-01-01

    WIRED Magazine has anounced the nominees for its fourth annual WIRED Rave Awards, celebrating innovation and the individuals transforming commerce and culture. Jeffrey Hangst of the University of Aarhus has been nominated in the science category, for his work on the ATHENA Experiment, CERN (1/2 page).

  17. 49 CFR 176.137 - Portable magazine.

    2010-10-01

    ... requirements: (1) It must be weather-tight, constructed of wood or metal lined with wood at least 2 cm (0.787... wood, a portable magazine must be framed of nominal 5 cm × 10 cm (2×4 inch) lumber, and sheathed with... used for the stowage of Class 1 (explosive) materials under such construction, handling, and stowage...

  18. Antioxidant health messages in Canadian women's magazines.

    Steinberg, Alissa; Paisley, Judy; Bandayrel, Kristofer

    2011-01-01

    Recently, antioxidants have taken centre stage in media and advertising messages. While 80% of Canadians think they are well-informed about nutrition, many are confused about the health effects of specific nutrients. Forty-six percent of Canadians seek information from newspapers and books, and 67% of women rely on magazines. We examined the content and accuracy of antioxidant health messages in Canadian women's magazines. The top three Canadian magazines targeted at women readers were selected. A screening tool was developed, pilot tested, and used to identify eligible articles. A coding scheme was created to define variables, which were coded and analyzed. Seventy-seven percent of 36 magazine issues contained articles that mentioned antioxidants (n=56). Seventy-one percent (n=40) of articles reported positive health effects related to antioxidant consumption, and 36% and 40% of those articles framed those effects as definite and potential, respectively (p<0.01). The articles sampled conveyed messages about positive antioxidant health effects that are not supported by current evidence. Improved standards of health reporting are needed. Nutrition professionals may need to address this inaccuracy when they develop communications on antioxidants and health risk.

  19. Use of Endorsers in Magazine Advertisements.

    Stout, Patricia A.; Moon, Young Sook

    1990-01-01

    Analyzes full-page advertisements in four national magazines for the years 1980 to 1986. Finds (1) endorsements occurred in about half of the advertisements; (2) endorsers most used were celebrities; (3) advertisements with endorsers contain less information; and (4) celebrities most often endorsed personal care or apparel products. (RS)

  20. BBC’s Wednesday magazine and arts television for women

    Irwin, Mary

    2015-01-01

    Wednesday Magazine (1958- 63) was an innovative BBC television afternoon arts and culture strand produced by the specialist BBC women’s programme unit, which had been built up and nurtured by the first dedicated head of women’s programmes Doreen Stephens, who was appointed in 1953. Stephens was responsible for the development of a diverse and extensive range of women’s programming; highly ambitious in the offering that it presented to its female viewers. This article will examine the series W...

  1. Strategy Guideline: Partnering for High Performance Homes

    Prahl, D.

    2013-01-01

    High performance houses require a high degree of coordination and have significant interdependencies between various systems in order to perform properly, meet customer expectations, and minimize risks for the builder. Responsibility for the key performance attributes is shared across the project team and can be well coordinated through advanced partnering strategies. For high performance homes, traditional partnerships need to be matured to the next level and be expanded to all members of the project team including trades, suppliers, manufacturers, HERS raters, designers, architects, and building officials as appropriate. In an environment where the builder is the only source of communication between trades and consultants and where relationships are, in general, adversarial as opposed to cooperative, the chances of any one building system to fail are greater. Furthermore, it is much harder for the builder to identify and capitalize on synergistic opportunities. Partnering can help bridge the cross-functional aspects of the systems approach and achieve performance-based criteria. Critical success factors for partnering include support from top management, mutual trust, effective and open communication, effective coordination around common goals, team building, appropriate use of an outside facilitator, a partnering charter progress toward common goals, an effective problem-solving process, long-term commitment, continuous improvement, and a positive experience for all involved.

  2. Mainstreaming the Avant-Garde: Modernism in Life Magazine (New York, 1883–1936

    Céline Mansanti

    2016-12-01

    Full Text Available This paper explores the relationship between literary modernism and mainstream culture within a little-studied American magazine, Life (New York, 1884-1936. It does so by looking at three ways in which Life presented modernism to its readers: by quoting modernist writing, and, above all, by satirizing modernist art, and by offering didactic explanations of modernist art and literature. By reconsidering some of the long-established divisions between high and low culture, and between ‘little’ and ‘bigger’ magazines, this paper contributes to a better understanding of what modernism was and meant. It also suggests that the double agenda observed in Life – both satirical and didactic – might be a way of defining middlebrow magazines.

  3. Long-term bridge performance high priority bridge performance issues.

    2014-10-01

    Bridge performance is a multifaceted issue involving performance of materials and protective systems, : performance of individual components of the bridge, and performance of the structural system as a whole. The : Long-Term Bridge Performance (LTBP)...

  4. Validated High Performance Liquid Chromatography Method for ...

    Purpose: To develop a simple, rapid and sensitive high performance liquid chromatography (HPLC) method for the determination of cefadroxil monohydrate in human plasma. Methods: Schimadzu HPLC with LC solution software was used with Waters Spherisorb, C18 (5 μm, 150mm × 4.5mm) column. The mobile phase ...

  5. An Introduction to High Performance Fortran

    John Merlin

    1995-01-01

    Full Text Available High Performance Fortran (HPF is an informal standard for extensions to Fortran 90 to assist its implementation on parallel architectures, particularly for data-parallel computation. Among other things, it includes directives for specifying data distribution across multiple memories, and concurrent execution features. This article provides a tutorial introduction to the main features of HPF.

  6. High performance computing on vector systems

    Roller, Sabine

    2008-01-01

    Presents the developments in high-performance computing and simulation on modern supercomputer architectures. This book covers trends in hardware and software development in general and specifically the vector-based systems and heterogeneous architectures. It presents innovative fields like coupled multi-physics or multi-scale simulations.

  7. High Performance Electronics on Flexible Silicon

    Sevilla, Galo T.

    2016-09-01

    Over the last few years, flexible electronic systems have gained increased attention from researchers around the world because of their potential to create new applications such as flexible displays, flexible energy harvesters, artificial skin, and health monitoring systems that cannot be integrated with conventional wafer based complementary metal oxide semiconductor processes. Most of the current efforts to create flexible high performance devices are based on the use of organic semiconductors. However, inherent material\\'s limitations make them unsuitable for big data processing and high speed communications. The objective of my doctoral dissertation is to develop integration processes that allow the transformation of rigid high performance electronics into flexible ones while maintaining their performance and cost. In this work, two different techniques to transform inorganic complementary metal-oxide-semiconductor electronics into flexible ones have been developed using industry compatible processes. Furthermore, these techniques were used to realize flexible discrete devices and circuits which include metal-oxide-semiconductor field-effect-transistors, the first demonstration of flexible Fin-field-effect-transistors, and metal-oxide-semiconductors-based circuits. Finally, this thesis presents a new technique to package, integrate, and interconnect flexible high performance electronics using low cost additive manufacturing techniques such as 3D printing and inkjet printing. This thesis contains in depth studies on electrical, mechanical, and thermal properties of the fabricated devices.

  8. Debugging a high performance computing program

    Gooding, Thomas M.

    2013-08-20

    Methods, apparatus, and computer program products are disclosed for debugging a high performance computing program by gathering lists of addresses of calling instructions for a plurality of threads of execution of the program, assigning the threads to groups in dependence upon the addresses, and displaying the groups to identify defective threads.

  9. Technology Leadership in Malaysia's High Performance School

    Yieng, Wong Ai; Daud, Khadijah Binti

    2017-01-01

    Headmaster as leader of the school also plays a role as a technology leader. This applies to the high performance schools (HPS) headmaster as well. The HPS excel in all aspects of education. In this study, researcher is interested in examining the role of the headmaster as a technology leader through interviews with three headmasters of high…

  10. Toward High Performance in Industrial Refrigeration Systems

    Thybo, C.; Izadi-Zamanabadi, Roozbeh; Niemann, H.

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

  11. Towards high performance in industrial refrigeration systems

    Thybo, C.; Izadi-Zamanabadi, R.; Niemann, Hans Henrik

    2002-01-01

    Achieving high performance in complex industrial systems requires information manipulation at different system levels. The paper shows how different models of same subsystems, but using different quality of information/data, are used for fault diagnosis as well as robust control design...

  12. Validated high performance liquid chromatographic (HPLC) method ...

    STORAGESEVER

    2010-02-22

    Feb 22, 2010 ... specific and accurate high performance liquid chromatographic method for determination of ZER in micro-volumes ... tional medicine as a cure for swelling, sores, loss of appetite and ... Receptor Activator for Nuclear Factor κ B Ligand .... The effect of ... be suitable for preclinical pharmacokinetic studies. The.

  13. Validated High Performance Liquid Chromatography Method for ...

    Purpose: To develop a simple, rapid and sensitive high performance liquid ... response, tailing factor and resolution of six replicate injections was < 3 %. ... Cefadroxil monohydrate, Human plasma, Pharmacokinetics Bioequivalence ... Drug-free plasma was obtained from the local .... Influence of probenicid on the renal.

  14. Integrated plasma control for high performance tokamaks

    Humphreys, D.A.; Deranian, R.D.; Ferron, J.R.; Johnson, R.D.; LaHaye, R.J.; Leuer, J.A.; Penaflor, B.G.; Walker, M.L.; Welander, A.S.; Jayakumar, R.J.; Makowski, M.A.; Khayrutdinov, R.R.

    2005-01-01

    Sustaining high performance in a tokamak requires controlling many equilibrium shape and profile characteristics simultaneously with high accuracy and reliability, while suppressing a variety of MHD instabilities. Integrated plasma control, the process of designing high-performance tokamak controllers based on validated system response models and confirming their performance in detailed simulations, provides a systematic method for achieving and ensuring good control performance. For present-day devices, this approach can greatly reduce the need for machine time traditionally dedicated to control optimization, and can allow determination of high-reliability controllers prior to ever producing the target equilibrium experimentally. A full set of tools needed for this approach has recently been completed and applied to present-day devices including DIII-D, NSTX and MAST. This approach has proven essential in the design of several next-generation devices including KSTAR, EAST, JT-60SC, and ITER. We describe the method, results of design and simulation tool development, and recent research producing novel approaches to equilibrium and MHD control in DIII-D. (author)

  15. Project materials [Commercial High Performance Buildings Project

    None

    2001-01-01

    The Consortium for High Performance Buildings (ChiPB) is an outgrowth of DOE'S Commercial Whole Buildings Roadmapping initiatives. It is a team-driven public/private partnership that seeks to enable and demonstrate the benefit of buildings that are designed, built and operated to be energy efficient, environmentally sustainable, superior quality, and cost effective.

  16. High performance structural ceramics for nuclear industry

    Pujari, Vimal K.; Faker, Paul

    2006-01-01

    A family of Saint-Gobain structural ceramic materials and products produced by its High performance Refractory Division is described. Over the last fifty years or so, Saint-Gobain has been a leader in developing non oxide ceramic based novel materials, processes and products for application in Nuclear, Chemical, Automotive, Defense and Mining industries

  17. A new high performance current transducer

    Tang Lijun; Lu Songlin; Li Deming

    2003-01-01

    A DC-100 kHz current transducer is developed using a new technique on zero-flux detecting principle. It was shown that the new current transducer is of high performance, its magnetic core need not be selected very stringently, and it is easy to manufacture

  18. Strategy Guideline. High Performance Residential Lighting

    Holton, J. [IBACOS, Inc., Pittsburgh, PA (United States)

    2012-02-01

    This report has been developed to provide a tool for the understanding and application of high performance lighting in the home. The strategies featured in this guide are drawn from recent advances in commercial lighting for application to typical spaces found in residential buildings. This guide offers strategies to greatly reduce lighting energy use through the application of high quality fluorescent and light emitting diode (LED) technologies. It is important to note that these strategies not only save energy in the home but also serve to satisfy the homeowner’s expectations for high quality lighting.

  19. Architecting Web Sites for High Performance

    Arun Iyengar

    2002-01-01

    Full Text Available Web site applications are some of the most challenging high-performance applications currently being developed and deployed. The challenges emerge from the specific combination of high variability in workload characteristics and of high performance demands regarding the service level, scalability, availability, and costs. In recent years, a large body of research has addressed the Web site application domain, and a host of innovative software and hardware solutions have been proposed and deployed. This paper is an overview of recent solutions concerning the architectures and the software infrastructures used in building Web site applications. The presentation emphasizes three of the main functions in a complex Web site: the processing of client requests, the control of service levels, and the interaction with remote network caches.

  20. High performance anode for advanced Li batteries

    Lake, Carla [Applied Sciences, Inc., Cedarville, OH (United States)

    2015-11-02

    The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.

  1. NINJA: Java for High Performance Numerical Computing

    José E. Moreira

    2002-01-01

    Full Text Available When Java was first introduced, there was a perception that its many benefits came at a significant performance cost. In the particularly performance-sensitive field of numerical computing, initial measurements indicated a hundred-fold performance disadvantage between Java and more established languages such as Fortran and C. Although much progress has been made, and Java now can be competitive with C/C++ in many important situations, significant performance challenges remain. Existing Java virtual machines are not yet capable of performing the advanced loop transformations and automatic parallelization that are now common in state-of-the-art Fortran compilers. Java also has difficulties in implementing complex arithmetic efficiently. These performance deficiencies can be attacked with a combination of class libraries (packages, in Java that implement truly multidimensional arrays and complex numbers, and new compiler techniques that exploit the properties of these class libraries to enable other, more conventional, optimizations. Two compiler techniques, versioning and semantic expansion, can be leveraged to allow fully automatic optimization and parallelization of Java code. Our measurements with the NINJA prototype Java environment show that Java can be competitive in performance with highly optimized and tuned Fortran code.

  2. Development of high performance cladding materials

    Park, Jeong Yong; Jeong, Y. H.; Park, S. Y.

    2010-04-01

    The irradiation test for HANA claddings conducted and a series of evaluation for next-HANA claddings as well as their in-pile and out-of pile performances tests were also carried out at Halden research reactor. The 6th irradiation test have been completed successfully in Halden research reactor. As a result, HANA claddings showed high performance, such as corrosion resistance increased by 40% compared to Zircaloy-4. The high performance of HANA claddings in Halden test has enabled lead test rod program as the first step of the commercialization of HANA claddings. DB has been established for thermal and LOCA-related properties. It was confirmed from the thermal shock test that the integrity of HANA claddings was maintained in more expanded region than the criteria regulated by NRC. The manufacturing process of strips was established in order to apply HANA alloys, which were originally developed for the claddings, to the spacer grids. 250 kinds of model alloys for the next-generation claddings were designed and manufactured over 4 times and used to select the preliminary candidate alloys for the next-generation claddings. The selected candidate alloys showed 50% better corrosion resistance and 20% improved high temperature oxidation resistance compared to the foreign advanced claddings. We established the manufacturing condition controlling the performance of the dual-cooled claddings by changing the reduction rate in the cold working steps

  3. A Linux Workstation for High Performance Graphics

    Geist, Robert; Westall, James

    2000-01-01

    The primary goal of this effort was to provide a low-cost method of obtaining high-performance 3-D graphics using an industry standard library (OpenGL) on PC class computers. Previously, users interested in doing substantial visualization or graphical manipulation were constrained to using specialized, custom hardware most often found in computers from Silicon Graphics (SGI). We provided an alternative to expensive SGI hardware by taking advantage of third-party, 3-D graphics accelerators that have now become available at very affordable prices. To make use of this hardware our goal was to provide a free, redistributable, and fully-compatible OpenGL work-alike library so that existing bodies of code could simply be recompiled. for PC class machines running a free version of Unix. This should allow substantial cost savings while greatly expanding the population of people with access to a serious graphics development and viewing environment. This should offer a means for NASA to provide a spectrum of graphics performance to its scientists, supplying high-end specialized SGI hardware for high-performance visualization while fulfilling the requirements of medium and lower performance applications with generic, off-the-shelf components and still maintaining compatibility between the two.

  4. The path toward HEP High Performance Computing

    Apostolakis, John; Carminati, Federico; Gheata, Andrei; Wenzel, Sandro

    2014-01-01

    High Energy Physics code has been known for making poor use of high performance computing architectures. Efforts in optimising HEP code on vector and RISC architectures have yield limited results and recent studies have shown that, on modern architectures, it achieves a performance between 10% and 50% of the peak one. Although several successful attempts have been made to port selected codes on GPUs, no major HEP code suite has a 'High Performance' implementation. With LHC undergoing a major upgrade and a number of challenging experiments on the drawing board, HEP cannot any longer neglect the less-than-optimal performance of its code and it has to try making the best usage of the hardware. This activity is one of the foci of the SFT group at CERN, which hosts, among others, the Root and Geant4 project. The activity of the experiments is shared and coordinated via a Concurrency Forum, where the experience in optimising HEP code is presented and discussed. Another activity is the Geant-V project, centred on th...

  5. [Images of Ageing in Health Care Magazines of the Public Health System].

    Hartmann-Tews, Ilse; Hoppe, Theresa

    2018-03-01

    Collective images of ageing influence attitudes towards ageing and health- related activities. The aim of this study was to explore images of ageing and old age in magazines published by public health institutions, namely health insurance companies and pharmacies. A standardized content analysis was conducted covering age-related articles (n=146) and accompanying photographs (n=218) of public health institutions. The stock of material comprises age-related articles of all magazines published 2012-2013 of 2 public health insurance companies (Allgemeine Ortskrankenkasse: "Bleib gesund", Barmer Ersatzkasse: "Gesundheit konkret"), 2 private health insurance companies (Gothaer Versicherung: "Gothaer magazin", Deutsche Krankenversicherung: "DKV impulse") and 2 consumer magazines of pharmacies ("Apothekenumschau","Senioren Ratgeber"). Illness turns out to be the most often focused main theme and key issue of age-related articles. With reference to the central dimensions of somatic culture - health, body-centered performance and appearance - most of the articles focus on deficits of old age, in particular illness and decrease of performance, and thus communicate a negative image of ageing. The visual presentation of elderly people is much more positive. There are various differences in the communication of images of ageing between the 2 types of magazines, with the consumer magazines of the pharmacy covering a broader spectrum of topics, referring more often to a healthy lifestyle and prevention and communicating a more multifaceted image of old age and ageing in comparison to the membership magazines of health insurance companies. Institutions of public health have many duties and responsibilities. One of these is to strengthen health competencies and locus of control of the population - in our case - elderly people. As images of ageing influence attitudes towards ageing and health-related activities, it seems to be sensible and of good economic sense to communicate a

  6. High Performance Commercial Fenestration Framing Systems

    Mike Manteghi; Sneh Kumar; Joshua Early; Bhaskar Adusumalli

    2010-01-31

    A major objective of the U.S. Department of Energy is to have a zero energy commercial building by the year 2025. Windows have a major influence on the energy performance of the building envelope as they control over 55% of building energy load, and represent one important area where technologies can be developed to save energy. Aluminum framing systems are used in over 80% of commercial fenestration products (i.e. windows, curtain walls, store fronts, etc.). Aluminum framing systems are often required in commercial buildings because of their inherent good structural properties and long service life, which is required from commercial and architectural frames. At the same time, they are lightweight and durable, requiring very little maintenance, and offer design flexibility. An additional benefit of aluminum framing systems is their relatively low cost and easy manufacturability. Aluminum, being an easily recyclable material, also offers sustainable features. However, from energy efficiency point of view, aluminum frames have lower thermal performance due to the very high thermal conductivity of aluminum. Fenestration systems constructed of aluminum alloys therefore have lower performance in terms of being effective barrier to energy transfer (heat loss or gain). Despite the lower energy performance, aluminum is the choice material for commercial framing systems and dominates the commercial/architectural fenestration market because of the reasons mentioned above. In addition, there is no other cost effective and energy efficient replacement material available to take place of aluminum in the commercial/architectural market. Hence it is imperative to improve the performance of aluminum framing system to improve the energy performance of commercial fenestration system and in turn reduce the energy consumption of commercial building and achieve zero energy building by 2025. The objective of this project was to develop high performance, energy efficient commercial

  7. Fracture toughness of ultra high performance concrete by flexural performance

    Manolova Emanuela

    2016-01-01

    Full Text Available This paper describes the fracture toughness of the innovative structural material - Ultra High Performance Concrete (UHPC, evaluated by flexural performance. For determination the material behaviour by static loading are used adapted standard test methods for flexural performance of fiber-reinforced concrete (ASTM C 1609 and ASTM C 1018. Fracture toughness is estimated by various deformation parameters derived from the load-deflection curve, obtained by testing simple supported beam under third-point loading, using servo-controlled testing system. This method is used to be estimated the contribution of the embedded fiber-reinforcement into improvement of the fractural behaviour of UHPC by changing the crack-resistant capacity, fracture toughness and energy absorption capacity with various mechanisms. The position of the first crack has been formulated based on P-δ (load- deflection response and P-ε (load - longitudinal deformation in the tensile zone response, which are used for calculation of the two toughness indices I5 and I10. The combination of steel fibres with different dimensions leads to a composite, having at the same time increased crack resistance, first crack formation, ductility and post-peak residual strength.

  8. HIGH PERFORMANCE CERIA BASED OXYGEN MEMBRANE

    2014-01-01

    The invention describes a new class of highly stable mixed conducting materials based on acceptor doped cerium oxide (CeO2-8 ) in which the limiting electronic conductivity is significantly enhanced by co-doping with a second element or co- dopant, such as Nb, W and Zn, so that cerium and the co......-dopant have an ionic size ratio between 0.5 and 1. These materials can thereby improve the performance and extend the range of operating conditions of oxygen permeation membranes (OPM) for different high temperature membrane reactor applications. The invention also relates to the manufacturing of supported...

  9. Playa: High-Performance Programmable Linear Algebra

    Victoria E. Howle

    2012-01-01

    Full Text Available This paper introduces Playa, a high-level user interface layer for composing algorithms for complex multiphysics problems out of objects from other Trilinos packages. Among other features, Playa provides very high-performance overloaded operators implemented through an expression template mechanism. In this paper, we give an overview of the central Playa objects from a user's perspective, show application to a sequence of increasingly complex solver algorithms, provide timing results for Playa's overloaded operators and other functions, and briefly survey some of the implementation issues involved.

  10. Optimizing the design of very high power, high performance converters

    Edwards, R.J.; Tiagha, E.A.; Ganetis, G.; Nawrocky, R.J.

    1980-01-01

    This paper describes how various technologies are used to achieve the desired performance in a high current magnet power converter system. It is hoped that the discussions of the design approaches taken will be applicable to other power supply systems where stringent requirements in stability, accuracy and reliability must be met

  11. Robust High Performance Aquaporin based Biomimetic Membranes

    Helix Nielsen, Claus; Zhao, Yichun; Qiu, C.

    2013-01-01

    on top of a support membrane. Control membranes, either without aquaporins or with the inactive AqpZ R189A mutant aquaporin served as controls. The separation performance of the membranes was evaluated by cross-flow forward osmosis (FO) and reverse osmosis (RO) tests. In RO the ABM achieved a water......Aquaporins are water channel proteins with high water permeability and solute rejection, which makes them promising for preparing high-performance biomimetic membranes. Despite the growing interest in aquaporin-based biomimetic membranes (ABMs), it is challenging to produce robust and defect...... permeability of ~ 4 L/(m2 h bar) with a NaCl rejection > 97% at an applied hydraulic pressure of 5 bar. The water permeability was ~40% higher compared to a commercial brackish water RO membrane (BW30) and an order of magnitude higher compared to a seawater RO membrane (SW30HR). In FO, the ABMs had > 90...

  12. Evaluation of high-performance computing software

    Browne, S.; Dongarra, J. [Univ. of Tennessee, Knoxville, TN (United States); Rowan, T. [Oak Ridge National Lab., TN (United States)

    1996-12-31

    The absence of unbiased and up to date comparative evaluations of high-performance computing software complicates a user`s search for the appropriate software package. The National HPCC Software Exchange (NHSE) is attacking this problem using an approach that includes independent evaluations of software, incorporation of author and user feedback into the evaluations, and Web access to the evaluations. We are applying this approach to the Parallel Tools Library (PTLIB), a new software repository for parallel systems software and tools, and HPC-Netlib, a high performance branch of the Netlib mathematical software repository. Updating the evaluations with feed-back and making it available via the Web helps ensure accuracy and timeliness, and using independent reviewers produces unbiased comparative evaluations difficult to find elsewhere.

  13. High performance cloud auditing and applications

    Choi, Baek-Young; Song, Sejun

    2014-01-01

    This book mainly focuses on cloud security and high performance computing for cloud auditing. The book discusses emerging challenges and techniques developed for high performance semantic cloud auditing, and presents the state of the art in cloud auditing, computing and security techniques with focus on technical aspects and feasibility of auditing issues in federated cloud computing environments.   In summer 2011, the United States Air Force Research Laboratory (AFRL) CyberBAT Cloud Security and Auditing Team initiated the exploration of the cloud security challenges and future cloud auditing research directions that are covered in this book. This work was supported by the United States government funds from the Air Force Office of Scientific Research (AFOSR), the AFOSR Summer Faculty Fellowship Program (SFFP), the Air Force Research Laboratory (AFRL) Visiting Faculty Research Program (VFRP), the National Science Foundation (NSF) and the National Institute of Health (NIH). All chapters were partially suppor...

  14. Monitoring SLAC High Performance UNIX Computing Systems

    Lettsome, Annette K.

    2005-01-01

    Knowledge of the effectiveness and efficiency of computers is important when working with high performance systems. The monitoring of such systems is advantageous in order to foresee possible misfortunes or system failures. Ganglia is a software system designed for high performance computing systems to retrieve specific monitoring information. An alternative storage facility for Ganglia's collected data is needed since its default storage system, the round-robin database (RRD), struggles with data integrity. The creation of a script-driven MySQL database solves this dilemma. This paper describes the process took in the creation and implementation of the MySQL database for use by Ganglia. Comparisons between data storage by both databases are made using gnuplot and Ganglia's real-time graphical user interface

  15. High performance parallel computers for science

    Nash, T.; Areti, H.; Atac, R.; Biel, J.; Cook, A.; Deppe, J.; Edel, M.; Fischler, M.; Gaines, I.; Hance, R.

    1989-01-01

    This paper reports that Fermilab's Advanced Computer Program (ACP) has been developing cost effective, yet practical, parallel computers for high energy physics since 1984. The ACP's latest developments are proceeding in two directions. A Second Generation ACP Multiprocessor System for experiments will include $3500 RISC processors each with performance over 15 VAX MIPS. To support such high performance, the new system allows parallel I/O, parallel interprocess communication, and parallel host processes. The ACP Multi-Array Processor, has been developed for theoretical physics. Each $4000 node is a FORTRAN or C programmable pipelined 20 Mflops (peak), 10 MByte single board computer. These are plugged into a 16 port crossbar switch crate which handles both inter and intra crate communication. The crates are connected in a hypercube. Site oriented applications like lattice gauge theory are supported by system software called CANOPY, which makes the hardware virtually transparent to users. A 256 node, 5 GFlop, system is under construction

  16. Toward a theory of high performance.

    Kirby, Julia

    2005-01-01

    What does it mean to be a high-performance company? The process of measuring relative performance across industries and eras, declaring top performers, and finding the common drivers of their success is such a difficult one that it might seem a fool's errand to attempt. In fact, no one did for the first thousand or so years of business history. The question didn't even occur to many scholars until Tom Peters and Bob Waterman released In Search of Excellence in 1982. Twenty-three years later, we've witnessed several more attempts--and, just maybe, we're getting closer to answers. In this reported piece, HBR senior editor Julia Kirby explores why it's so difficult to study high performance and how various research efforts--including those from John Kotter and Jim Heskett; Jim Collins and Jerry Porras; Bill Joyce, Nitin Nohria, and Bruce Roberson; and several others outlined in a summary chart-have attacked the problem. The challenge starts with deciding which companies to study closely. Are the stars the ones with the highest market caps, the ones with the greatest sales growth, or simply the ones that remain standing at the end of the game? (And when's the end of the game?) Each major study differs in how it defines success, which companies it therefore declares to be worthy of emulation, and the patterns of activity and attitude it finds in common among them. Yet, Kirby concludes, as each study's method incrementally solves problems others have faced, we are progressing toward a consensus theory of high performance.

  17. High-performance phase-field modeling

    Vignal, Philippe; Sarmiento, Adel; Cortes, Adriano Mauricio; Dalcin, L.; Collier, N.; Calo, Victor M.

    2015-01-01

    and phase-field crystal equation will be presented, which corroborate the theoretical findings, and illustrate the robustness of the method. Results related to more challenging examples, namely the Navier-Stokes Cahn-Hilliard and a diusion-reaction Cahn-Hilliard system, will also be presented. The implementation was done in PetIGA and PetIGA-MF, high-performance Isogeometric Analysis frameworks [1, 3], designed to handle non-linear, time-dependent problems.

  18. AHPCRC - Army High Performance Computing Research Center

    2010-01-01

    computing. Of particular interest is the ability of a distrib- uted jamming network (DJN) to jam signals in all or part of a sensor or communications net...and reasoning, assistive technologies. FRIEDRICH (FRITZ) PRINZ Finmeccanica Professor of Engineering, Robert Bosch Chair, Department of Engineering...High Performance Computing Research Center www.ahpcrc.org BARBARA BRYAN AHPCRC Research and Outreach Manager, HPTi (650) 604-3732 bbryan@hpti.com Ms

  19. Performance concerns for high duty fuel cycle

    Esposito, V.J.; Gutierrez, J.E.

    1999-01-01

    One of the goals of the nuclear industry is to achieve economic performance such that nuclear power plants are competitive in a de-regulated market. The manner in which nuclear fuel is designed and operated lies at the heart of economic viability. In this sense reliability, operating flexibility and low costs are the three major requirements of the NPP today. The translation of these three requirements to the design is part of our work. The challenge today is to produce a fuel design which will operate with long operating cycles, high discharge burnup, power up-rating and while still maintaining all design and safety margins. European Fuel Group (EFG) understands that to achieve the required performance high duty/energy fuel designs are needed. The concerns for high duty design includes, among other items, core design methods, advanced Safety Analysis methodologies, performance models, advanced material and operational strategies. The operational aspects require the trade-off and evaluation of various parameters including coolant chemistry control, material corrosion, boiling duty, boron level impacts, etc. In this environment MAEF is the design that EFG is now offering based on ZIRLO alloy and a robust skeleton. This new design is able to achieve 70 GWd/tU and Lead Test Programs are being executed to demonstrate this capability. A number of performance issues which have been a concern with current designs have been resolved such as cladding corrosion and incomplete RCCA insertion (IRI). As the core duty becomes more aggressive other new issues need to be addressed such as Axial Offset Anomaly. These new issues are being addressed by combination of the new design in concert with advanced methodologies to meet the demanding needs of NPP. The ability and strategy to meet high duty core requirements, flexibility of operation and maintain acceptable balance of all technical issues is the discussion in this paper. (authors)

  20. DURIP: High Performance Computing in Biomathematics Applications

    2017-05-10

    Mathematics and Statistics (AMS) at the University of California, Santa Cruz (UCSC) to conduct research and research-related education in areas of...Computing in Biomathematics Applications Report Title The goal of this award was to enhance the capabilities of the Department of Applied Mathematics and...DURIP: High Performance Computing in Biomathematics Applications The goal of this award was to enhance the capabilities of the Department of Applied

  1. High Performance Computing Operations Review Report

    Cupps, Kimberly C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2013-12-19

    The High Performance Computing Operations Review (HPCOR) meeting—requested by the ASC and ASCR program headquarters at DOE—was held November 5 and 6, 2013, at the Marriott Hotel in San Francisco, CA. The purpose of the review was to discuss the processes and practices for HPC integration and its related software and facilities. Experiences and lessons learned from the most recent systems deployed were covered in order to benefit the deployment of new systems.

  2. Planning for high performance project teams

    Reed, W.; Keeney, J.; Westney, R.

    1997-01-01

    Both industry-wide research and corporate benchmarking studies confirm the significant savings in cost and time that result from early planning of a project. Amoco's Team Planning Workshop combines long-term strategic project planning and short-term tactical planning with team building to provide the basis for high performing project teams, better project planning, and effective implementation of the Amoco Common Process for managing projects

  3. 27 CFR 555.214 - Storage within types 1, 2, 3, and 4 magazines.

    2010-04-01

    ..., 3, and 4 magazines. 555.214 Section 555.214 Alcohol, Tobacco Products, and Firearms BUREAU OF... Storage § 555.214 Storage within types 1, 2, 3, and 4 magazines. (a) Explosive materials within a magazine... materials are not to be unpacked or repacked inside a magazine or within 50 feet of a magazine, and must not...

  4. Computational Biology and High Performance Computing 2000

    Simon, Horst D.; Zorn, Manfred D.; Spengler, Sylvia J.; Shoichet, Brian K.; Stewart, Craig; Dubchak, Inna L.; Arkin, Adam P.

    2000-10-19

    The pace of extraordinary advances in molecular biology has accelerated in the past decade due in large part to discoveries coming from genome projects on human and model organisms. The advances in the genome project so far, happening well ahead of schedule and under budget, have exceeded any dreams by its protagonists, let alone formal expectations. Biologists expect the next phase of the genome project to be even more startling in terms of dramatic breakthroughs in our understanding of human biology, the biology of health and of disease. Only today can biologists begin to envision the necessary experimental, computational and theoretical steps necessary to exploit genome sequence information for its medical impact, its contribution to biotechnology and economic competitiveness, and its ultimate contribution to environmental quality. High performance computing has become one of the critical enabling technologies, which will help to translate this vision of future advances in biology into reality. Biologists are increasingly becoming aware of the potential of high performance computing. The goal of this tutorial is to introduce the exciting new developments in computational biology and genomics to the high performance computing community.

  5. High performance separation of lanthanides and actinides

    Sivaraman, N.; Vasudeva Rao, P.R.

    2011-01-01

    The major advantage of High Performance Liquid Chromatography (HPLC) is its ability to provide rapid and high performance separations. It is evident from Van Deemter curve for particle size versus resolution that packing materials with particle sizes less than 2 μm provide better resolution for high speed separations and resolving complex mixtures compared to 5 μm based supports. In the recent past, chromatographic support material using monolith has been studied extensively at our laboratory. Monolith column consists of single piece of porous, rigid material containing mesopores and micropores, which provide fast analyte mass transfer. Monolith support provides significantly higher separation efficiency than particle-packed columns. A clear advantage of monolith is that it could be operated at higher flow rates but with lower back pressure. Higher operating flow rate results in higher column permeability, which drastically reduces analysis time and provides high separation efficiency. The above developed fast separation methods were applied to assay the lanthanides and actinides from the dissolver solutions of nuclear reactor fuels

  6. High Performance OLED Panel and Luminaire

    Spindler, Jeffrey [OLEDWorks LLC, Rochester, NY (United States)

    2017-02-20

    In this project, OLEDWorks developed and demonstrated the technology required to produce OLED lighting panels with high energy efficiency and excellent light quality. OLED panels developed in this program produce high quality warm white light with CRI greater than 85 and efficacy up to 80 lumens per watt (LPW). An OLED luminaire employing 24 of the high performance panels produces practical levels of illumination for general lighting, with a flux of over 2200 lumens at 60 LPW. This is a significant advance in the state of the art for OLED solid-state lighting (SSL), which is expected to be a complementary light source to the more advanced LED SSL technology that is rapidly replacing all other traditional forms of lighting.

  7. Yearbook and Magazine Layout, English, Journalism. Language Arts: 5113.200.

    Adams, Marlene E.

    Developed as a quinmester unit for the high school on yearbook and magazine layout, this guide provides the teacher with suggested teaching strategies for a study of the theory and practice of page layout, photo cropping and editing, use of color and special effects, copy fitting and headline writing and fitting, and principles of typography.…

  8. The path toward HEP High Performance Computing

    Apostolakis, John; Brun, René; Gheata, Andrei; Wenzel, Sandro; Carminati, Federico

    2014-01-01

    High Energy Physics code has been known for making poor use of high performance computing architectures. Efforts in optimising HEP code on vector and RISC architectures have yield limited results and recent studies have shown that, on modern architectures, it achieves a performance between 10% and 50% of the peak one. Although several successful attempts have been made to port selected codes on GPUs, no major HEP code suite has a 'High Performance' implementation. With LHC undergoing a major upgrade and a number of challenging experiments on the drawing board, HEP cannot any longer neglect the less-than-optimal performance of its code and it has to try making the best usage of the hardware. This activity is one of the foci of the SFT group at CERN, which hosts, among others, the Root and Geant4 project. The activity of the experiments is shared and coordinated via a Concurrency Forum, where the experience in optimising HEP code is presented and discussed. Another activity is the Geant-V project, centred on the development of a highperformance prototype for particle transport. Achieving a good concurrency level on the emerging parallel architectures without a complete redesign of the framework can only be done by parallelizing at event level, or with a much larger effort at track level. Apart the shareable data structures, this typically implies a multiplication factor in terms of memory consumption compared to the single threaded version, together with sub-optimal handling of event processing tails. Besides this, the low level instruction pipelining of modern processors cannot be used efficiently to speedup the program. We have implemented a framework that allows scheduling vectors of particles to an arbitrary number of computing resources in a fine grain parallel approach. The talk will review the current optimisation activities within the SFT group with a particular emphasis on the development perspectives towards a simulation framework able to profit

  9. A High Performance COTS Based Computer Architecture

    Patte, Mathieu; Grimoldi, Raoul; Trautner, Roland

    2014-08-01

    Using Commercial Off The Shelf (COTS) electronic components for space applications is a long standing idea. Indeed the difference in processing performance and energy efficiency between radiation hardened components and COTS components is so important that COTS components are very attractive for use in mass and power constrained systems. However using COTS components in space is not straightforward as one must account with the effects of the space environment on the COTS components behavior. In the frame of the ESA funded activity called High Performance COTS Based Computer, Airbus Defense and Space and its subcontractor OHB CGS have developed and prototyped a versatile COTS based architecture for high performance processing. The rest of the paper is organized as follows: in a first section we will start by recapitulating the interests and constraints of using COTS components for space applications; then we will briefly describe existing fault mitigation architectures and present our solution for fault mitigation based on a component called the SmartIO; in the last part of the paper we will describe the prototyping activities executed during the HiP CBC project.

  10. Management issues for high performance storage systems

    Louis, S. [Lawrence Livermore National Lab., CA (United States); Burris, R. [Oak Ridge National Lab., TN (United States)

    1995-03-01

    Managing distributed high-performance storage systems is complex and, although sharing common ground with traditional network and systems management, presents unique storage-related issues. Integration technologies and frameworks exist to help manage distributed network and system environments. Industry-driven consortia provide open forums where vendors and users cooperate to leverage solutions. But these new approaches to open management fall short addressing the needs of scalable, distributed storage. We discuss the motivation and requirements for storage system management (SSM) capabilities and describe how SSM manages distributed servers and storage resource objects in the High Performance Storage System (HPSS), a new storage facility for data-intensive applications and large-scale computing. Modem storage systems, such as HPSS, require many SSM capabilities, including server and resource configuration control, performance monitoring, quality of service, flexible policies, file migration, file repacking, accounting, and quotas. We present results of initial HPSS SSM development including design decisions and implementation trade-offs. We conclude with plans for follow-on work and provide storage-related recommendations for vendors and standards groups seeking enterprise-wide management solutions.

  11. Organa: The First Portuguese Lesbian Magazine.

    Brandão, Ana Maria; Machado, Tânia Cristina

    2016-01-01

    Organa magazine (1990-1992) is the first known lesbian publication in Portugal and exemplifies the distinct course of lesbian activism in Portugal, namely the late emergence and consolidation of a national lesbian community and subculture. Organa also bears similarities with the international gay and lesbian press regarding its alternative character, objectives, editorial contents, and trajectory. Despite having adopted an assimilationist strategy during most of its existence, it is argued that Organa fostered the political mobilization of Portuguese lesbians.

  12. Front Cover Photograph & Interview for FREEYE Magazine

    Murray, Matthew

    2003-01-01

    Matthew Murray Front Cover Photograph & Interview for FREEYE Magazine - Dutch Quarterly For Exceptional International Photography, Holland.\\ud The article focuses on Murray's practice, his personal work, commissioned work, advertising, gallery and exhibition work along with his methodology. Looking at Murray's inspirations and how they feed into his personal projects and how this personal work feeds into shooting above the line advertising campaigns. Murray's work blurs the lines between pers...

  13. Automatic Energy Schemes for High Performance Applications

    Sundriyal, Vaibhav [Iowa State Univ., Ames, IA (United States)

    2013-01-01

    Although high-performance computing traditionally focuses on the efficient execution of large-scale applications, both energy and power have become critical concerns when approaching exascale. Drastic increases in the power consumption of supercomputers affect significantly their operating costs and failure rates. In modern microprocessor architectures, equipped with dynamic voltage and frequency scaling (DVFS) and CPU clock modulation (throttling), the power consumption may be controlled in software. Additionally, network interconnect, such as Infiniband, may be exploited to maximize energy savings while the application performance loss and frequency switching overheads must be carefully balanced. This work first studies two important collective communication operations, all-to-all and allgather and proposes energy saving strategies on the per-call basis. Next, it targets point-to-point communications to group them into phases and apply frequency scaling to them to save energy by exploiting the architectural and communication stalls. Finally, it proposes an automatic runtime system which combines both collective and point-to-point communications into phases, and applies throttling to them apart from DVFS to maximize energy savings. The experimental results are presented for NAS parallel benchmark problems as well as for the realistic parallel electronic structure calculations performed by the widely used quantum chemistry package GAMESS. Close to the maximum energy savings were obtained with a substantially low performance loss on the given platform.

  14. High-performance computing in seismology

    NONE

    1996-09-01

    The scientific, technical, and economic importance of the issues discussed here presents a clear agenda for future research in computational seismology. In this way these problems will drive advances in high-performance computing in the field of seismology. There is a broad community that will benefit from this work, including the petroleum industry, research geophysicists, engineers concerned with seismic hazard mitigation, and governments charged with enforcing a comprehensive test ban treaty. These advances may also lead to new applications for seismological research. The recent application of high-resolution seismic imaging of the shallow subsurface for the environmental remediation industry is an example of this activity. This report makes the following recommendations: (1) focused efforts to develop validated documented software for seismological computations should be supported, with special emphasis on scalable algorithms for parallel processors; (2) the education of seismologists in high-performance computing technologies and methodologies should be improved; (3) collaborations between seismologists and computational scientists and engineers should be increased; (4) the infrastructure for archiving, disseminating, and processing large volumes of seismological data should be improved.

  15. A high performance architecture for accelerator controls

    Allen, M.; Hunt, S.M; Lue, H.; Saltmarsh, C.G.; Parker, C.R.C.B.

    1991-01-01

    The demands placed on the Superconducting Super Collider (SSC) control system due to large distances, high bandwidth and fast response time required for operation will require a fresh approach to the data communications architecture of the accelerator. The prototype design effort aims at providing deterministic communication across the accelerator complex with a response time of < 100 ms and total bandwidth of 2 Gbits/sec. It will offer a consistent interface for a large number of equipment types, from vacuum pumps to beam position monitors, providing appropriate communications performance for each equipment type. It will consist of highly parallel links to all equipment: those with computing resources, non-intelligent direct control interfaces, and data concentrators. This system will give each piece of equipment a dedicated link of fixed bandwidth to the control system. Application programs will have access to all accelerator devices which will be memory mapped into a global virtual addressing scheme. Links to devices in the same geographical area will be multiplexed using commercial Time Division Multiplexing equipment. Low-level access will use reflective memory techniques, eliminating processing overhead and complexity of traditional data communication protocols. The use of commercial standards and equipment will enable a high performance system to be built at low cost

  16. A high performance architecture for accelerator controls

    Allen, M.; Hunt, S.M.; Lue, H.; Saltmarsh, C.G.; Parker, C.R.C.B.

    1991-03-01

    The demands placed on the Superconducting Super Collider (SSC) control system due to large distances, high bandwidth and fast response time required for operation will require a fresh approach to the data communications architecture of the accelerator. The prototype design effort aims at providing deterministic communication across the accelerator complex with a response time of <100 ms and total bandwidth of 2 Gbits/sec. It will offer a consistent interface for a large number of equipment types, from vacuum pumps to beam position monitors, providing appropriate communications performance for each equipment type. It will consist of highly parallel links to all equipments: those with computing resources, non-intelligent direct control interfaces, and data concentrators. This system will give each piece of equipment a dedicated link of fixed bandwidth to the control system. Application programs will have access to all accelerator devices which will be memory mapped into a global virtual addressing scheme. Links to devices in the same geographical area will be multiplexed using commercial Time Division Multiplexing equipment. Low-level access will use reflective memory techniques, eliminating processing overhead and complexity of traditional data communication protocols. The use of commercial standards and equipment will enable a high performance system to be built at low cost. 1 fig

  17. High performance computing in linear control

    Datta, B.N.

    1993-01-01

    Remarkable progress has been made in both theory and applications of all important areas of control. The theory is rich and very sophisticated. Some beautiful applications of control theory are presently being made in aerospace, biomedical engineering, industrial engineering, robotics, economics, power systems, etc. Unfortunately, the same assessment of progress does not hold in general for computations in control theory. Control Theory is lagging behind other areas of science and engineering in this respect. Nowadays there is a revolution going on in the world of high performance scientific computing. Many powerful computers with vector and parallel processing have been built and have been available in recent years. These supercomputers offer very high speed in computations. Highly efficient software, based on powerful algorithms, has been developed to use on these advanced computers, and has also contributed to increased performance. While workers in many areas of science and engineering have taken great advantage of these hardware and software developments, control scientists and engineers, unfortunately, have not been able to take much advantage of these developments

  18. Building Trust in High-Performing Teams

    Aki Soudunsaari

    2012-06-01

    Full Text Available Facilitation of growth is more about good, trustworthy contacts than capital. Trust is a driving force for business creation, and to create a global business you need to build a team that is capable of meeting the challenge. Trust is a key factor in team building and a needed enabler for cooperation. In general, trust building is a slow process, but it can be accelerated with open interaction and good communication skills. The fast-growing and ever-changing nature of global business sets demands for cooperation and team building, especially for startup companies. Trust building needs personal knowledge and regular face-to-face interaction, but it also requires empathy, respect, and genuine listening. Trust increases communication, and rich and open communication is essential for the building of high-performing teams. Other building materials are a shared vision, clear roles and responsibilities, willingness for cooperation, and supporting and encouraging leadership. This study focuses on trust in high-performing teams. It asks whether it is possible to manage trust and which tools and operation models should be used to speed up the building of trust. In this article, preliminary results from the authors’ research are presented to highlight the importance of sharing critical information and having a high level of communication through constant interaction.

  19. Aging and masculinity: portrayals in men's magazines.

    Hurd Clarke, Laura; Bennett, Erica V; Liu, Chris

    2014-12-01

    Textual and visual representations of age are instructive as they suggest ideals towards which individuals should strive and influence how we perceive age. The purpose of our study was to investigate textual and visual representations of later life in the advertisements and interest stories of six widely read North American male-oriented magazines (namely, Esquire, GQ, Maxim, Men's Health, Men's Journal, and Zoomer). Through a content analysis and a visual textual analysis, we examined how older men were depicted in the magazine images and accompanying texts. Our findings revealed that older men were largely absent, and when portrayed, were positively depicted as experienced and powerful celebrities or as healthy and happy unknown individuals. The magazine advertisements and interest stories collectively required individuals to engage in consumer culture in order to achieve age and masculinity ideals and stave off the transition from the Third Age to the Fourth Age. We consider our findings in relation to theorizing about ageism, age relations, the Third and Fourth Ages, and idealized aging masculinity. Copyright © 2014 Elsevier Inc. All rights reserved.

  20. Improving UV Resistance of High Performance Fibers

    Hassanin, Ahmed

    High performance fibers are characterized by their superior properties compared to the traditional textile fibers. High strength fibers have high modules, high strength to weight ratio, high chemical resistance, and usually high temperature resistance. It is used in application where superior properties are needed such as bulletproof vests, ropes and cables, cut resistant products, load tendons for giant scientific balloons, fishing rods, tennis racket strings, parachute cords, adhesives and sealants, protective apparel and tire cords. Unfortunately, Ultraviolet (UV) radiation causes serious degradation to the most of high performance fibers. UV lights, either natural or artificial, cause organic compounds to decompose and degrade, because the energy of the photons of UV light is high enough to break chemical bonds causing chain scission. This work is aiming at achieving maximum protection of high performance fibers using sheathing approaches. The sheaths proposed are of lightweight to maintain the advantage of the high performance fiber that is the high strength to weight ratio. This study involves developing three different types of sheathing. The product of interest that need be protected from UV is braid from PBO. First approach is extruding a sheath from Low Density Polyethylene (LDPE) loaded with different rutile TiO2 % nanoparticles around the braid from the PBO. The results of this approach showed that LDPE sheath loaded with 10% TiO2 by weight achieved the highest protection compare to 0% and 5% TiO2. The protection here is judged by strength loss of PBO. This trend noticed in different weathering environments, where the sheathed samples were exposed to UV-VIS radiations in different weatheromter equipments as well as exposure to high altitude environment using NASA BRDL balloon. The second approach is focusing in developing a protective porous membrane from polyurethane loaded with rutile TiO2 nanoparticles. Membrane from polyurethane loaded with 4

  1. Intel Xeon Phi coprocessor high performance programming

    Jeffers, James

    2013-01-01

    Authors Jim Jeffers and James Reinders spent two years helping educate customers about the prototype and pre-production hardware before Intel introduced the first Intel Xeon Phi coprocessor. They have distilled their own experiences coupled with insights from many expert customers, Intel Field Engineers, Application Engineers and Technical Consulting Engineers, to create this authoritative first book on the essentials of programming for this new architecture and these new products. This book is useful even before you ever touch a system with an Intel Xeon Phi coprocessor. To ensure that your applications run at maximum efficiency, the authors emphasize key techniques for programming any modern parallel computing system whether based on Intel Xeon processors, Intel Xeon Phi coprocessors, or other high performance microprocessors. Applying these techniques will generally increase your program performance on any system, and better prepare you for Intel Xeon Phi coprocessors and the Intel MIC architecture. It off...

  2. Development of high-performance blended cements

    Wu, Zichao

    2000-10-01

    This thesis presents the development of high-performance blended cements from industrial by-products. To overcome the low-early strength of blended cements, several chemicals were studied as the activators for cement hydration. Sodium sulfate was discovered as the best activator. The blending proportions were optimized by Taguchi experimental design. The optimized blended cements containing up to 80% fly ash performed better than Type I cement in strength development and durability. Maintaining a constant cement content, concrete produced from the optimized blended cements had equal or higher strength and higher durability than that produced from Type I cement alone. The key for the activation mechanism was the reaction between added SO4 2- and Ca2+ dissolved from cement hydration products.

  3. Utilities for high performance dispersion model PHYSIC

    Yamazawa, Hiromi

    1992-09-01

    The description and usage of the utilities for the dispersion calculation model PHYSIC were summarized. The model was developed in the study of developing high performance SPEEDI with the purpose of introducing meteorological forecast function into the environmental emergency response system. The procedure of PHYSIC calculation consists of three steps; preparation of relevant files, creation and submission of JCL, and graphic output of results. A user can carry out the above procedure with the help of the Geographical Data Processing Utility, the Model Control Utility, and the Graphic Output Utility. (author)

  4. An integrated high performance fastbus slave interface

    Christiansen, J.; Ljuslin, C.

    1992-01-01

    A high performance Fastbus slave interface ASIC is presented. The Fastbus slave integrated circuit (FASIC) is a programmable device, enabling its direct use in many different applications. The FASIC acts as an interface between Fastbus and a 'standard' processor/memory bus. It can work stand-alone or together with a microprocessor. A set of address mapping windows can map Fastbus addresses to convenient memory addresses and at the same time act as address decoding logic. Data rates of 100 MBytes/s to Fastbus can be obtained using an internal FIFO buffer in the FASIC. (orig.)

  5. High performance visual display for HENP detectors

    McGuigan, M; Spiletic, J; Fine, V; Nevski, P

    2001-01-01

    A high end visual display for High Energy Nuclear Physics (HENP) detectors is necessary because of the sheer size and complexity of the detector. For BNL this display will be of special interest because of STAR and ATLAS. To load, rotate, query, and debug simulation code with a modern detector simply takes too long even on a powerful work station. To visualize the HENP detectors with maximal performance we have developed software with the following characteristics. We develop a visual display of HENP detectors on BNL multiprocessor visualization server at multiple level of detail. We work with general and generic detector framework consistent with ROOT, GAUDI etc, to avoid conflicting with the many graphic development groups associated with specific detectors like STAR and ATLAS. We develop advanced OpenGL features such as transparency and polarized stereoscopy. We enable collaborative viewing of detector and events by directly running the analysis in BNL stereoscopic theatre. We construct enhanced interactiv...

  6. High-Performance Vertical Organic Electrochemical Transistors.

    Donahue, Mary J; Williamson, Adam; Strakosas, Xenofon; Friedlein, Jacob T; McLeod, Robert R; Gleskova, Helena; Malliaras, George G

    2018-02-01

    Organic electrochemical transistors (OECTs) are promising transducers for biointerfacing due to their high transconductance, biocompatibility, and availability in a variety of form factors. Most OECTs reported to date, however, utilize rather large channels, limiting the transistor performance and resulting in a low transistor density. This is typically a consequence of limitations associated with traditional fabrication methods and with 2D substrates. Here, the fabrication and characterization of OECTs with vertically stacked contacts, which overcome these limitations, is reported. The resulting vertical transistors exhibit a reduced footprint, increased intrinsic transconductance of up to 57 mS, and a geometry-normalized transconductance of 814 S m -1 . The fabrication process is straightforward and compatible with sensitive organic materials, and allows exceptional control over the transistor channel length. This novel 3D fabrication method is particularly suited for applications where high density is needed, such as in implantable devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. High Performance Data Distribution for Scientific Community

    Tirado, Juan M.; Higuero, Daniel; Carretero, Jesus

    2010-05-01

    Institutions such as NASA, ESA or JAXA find solutions to distribute data from their missions to the scientific community, and their long term archives. This is a complex problem, as it includes a vast amount of data, several geographically distributed archives, heterogeneous architectures with heterogeneous networks, and users spread around the world. We propose a novel architecture (HIDDRA) that solves this problem aiming to reduce user intervention in data acquisition and processing. HIDDRA is a modular system that provides a highly efficient parallel multiprotocol download engine, using a publish/subscribe policy which helps the final user to obtain data of interest transparently. Our system can deal simultaneously with multiple protocols (HTTP,HTTPS, FTP, GridFTP among others) to obtain the maximum bandwidth, reducing the workload in data server and increasing flexibility. It can also provide high reliability and fault tolerance, as several sources of data can be used to perform one file download. HIDDRA architecture can be arranged into a data distribution network deployed on several sites that can cooperate to provide former features. HIDDRA has been addressed by the 2009 e-IRG Report on Data Management as a promising initiative for data interoperability. Our first prototype has been evaluated in collaboration with the ESAC centre in Villafranca del Castillo (Spain) that shows a high scalability and performance, opening a wide spectrum of opportunities. Some preliminary results have been published in the Journal of Astrophysics and Space Science [1]. [1] D. Higuero, J.M. Tirado, J. Carretero, F. Félix, and A. de La Fuente. HIDDRA: a highly independent data distribution and retrieval architecture for space observation missions. Astrophysics and Space Science, 321(3):169-175, 2009

  8. High-performance laboratories and cleanrooms; TOPICAL

    Tschudi, William; Sartor, Dale; Mills, Evan; Xu, Tengfang

    2002-01-01

    The California Energy Commission sponsored this roadmap to guide energy efficiency research and deployment for high performance cleanrooms and laboratories. Industries and institutions utilizing these building types (termed high-tech buildings) have played an important part in the vitality of the California economy. This roadmap's key objective to present a multi-year agenda to prioritize and coordinate research efforts. It also addresses delivery mechanisms to get the research products into the market. Because of the importance to the California economy, it is appropriate and important for California to take the lead in assessing the energy efficiency research needs, opportunities, and priorities for this market. In addition to the importance to California's economy, energy demand for this market segment is large and growing (estimated at 9400 GWH for 1996, Mills et al. 1996). With their 24hr. continuous operation, high tech facilities are a major contributor to the peak electrical demand. Laboratories and cleanrooms constitute the high tech building market, and although each building type has its unique features, they are similar in that they are extremely energy intensive, involve special environmental considerations, have very high ventilation requirements, and are subject to regulations-primarily safety driven-that tend to have adverse energy implications. High-tech buildings have largely been overlooked in past energy efficiency research. Many industries and institutions utilize laboratories and cleanrooms. As illustrated, there are many industries operating cleanrooms in California. These include semiconductor manufacturing, semiconductor suppliers, pharmaceutical, biotechnology, disk drive manufacturing, flat panel displays, automotive, aerospace, food, hospitals, medical devices, universities, and federal research facilities

  9. Magazine Influence on Cartridge Case Ejection Patterns with Glock Pistols.

    Kerkhoff, Wim; Alberink, Ivo; Mattijssen, Erwin J A T

    2018-01-01

    In this study, the cartridge case ejection patterns of six different Glock model pistols (one specimen per model) were compared under three conditions: firing with a loaded magazine, an empty magazine, and without magazine. The distances, covered by the ejected cartridge cases given these three conditions, were compared for each of the six models. A significant difference was found between the groups of data for each of the tested specimens. This indicates that it is important that, to reconstruct a shooting scene incident based on the ejection patterns of a pistol, test shots are fired with the same pistol type and under the correct magazine condition. © 2017 American Academy of Forensic Sciences.

  10. Face-ism and Objectification in Mainstream and LGBT Magazines

    Cheek, Nathan N.

    2016-01-01

    In visual media, men are often shown with more facial prominence than women, a manifestation of sexism that has been labeled face-ism. The present research extended the study of facial prominence and gender representation in media to include magazines aimed at lesbian, gay, bisexual, and transgender (LGBT) audiences for the first time, and also examined whether overall gender differences in facial prominence can still be found in mainstream magazines. Face-ism emerged in Newsweek, but not in Time, The Advocate, or Out. Although there were no overall differences in facial prominence between mainstream and LGBT magazines, there were differences in the facial prominence of men and women among the four magazines included in the present study. These results suggest that face-ism is still a problem, but that it may be restricted to certain magazines. Furthermore, future research may benefit from considering individual magazine titles rather than broader categories of magazines, given that the present study found few similarities between different magazines in the same media category—indeed, Out and Time were more similar to each other than they were to the other magazine in their respective categories. PMID:27074012

  11. Face-ism and Objectification in Mainstream and LGBT Magazines.

    Nathan N Cheek

    Full Text Available In visual media, men are often shown with more facial prominence than women, a manifestation of sexism that has been labeled face-ism. The present research extended the study of facial prominence and gender representation in media to include magazines aimed at lesbian, gay, bisexual, and transgender (LGBT audiences for the first time, and also examined whether overall gender differences in facial prominence can still be found in mainstream magazines. Face-ism emerged in Newsweek, but not in Time, The Advocate, or Out. Although there were no overall differences in facial prominence between mainstream and LGBT magazines, there were differences in the facial prominence of men and women among the four magazines included in the present study. These results suggest that face-ism is still a problem, but that it may be restricted to certain magazines. Furthermore, future research may benefit from considering individual magazine titles rather than broader categories of magazines, given that the present study found few similarities between different magazines in the same media category--indeed, Out and Time were more similar to each other than they were to the other magazine in their respective categories.

  12. Swimsuit issues: promoting positive body image in young women's magazines.

    Boyd, Elizabeth Reid; Moncrieff-Boyd, Jessica

    2011-08-01

    This preliminary study reviews the promotion of healthy body image to young Australian women, following the 2009 introduction of the voluntary Industry Code of Conduct on Body Image. The Code includes using diverse sized models in magazines. A qualitative content analysis of the 2010 annual 'swimsuit issues' was conducted on 10 Australian young women's magazines. Pictorial and/or textual editorial evidence of promoting diverse body shapes and sizes was regarded as indicative of the magazines' upholding aspects of the voluntary Code of Conduct for Body Image. Diverse sized models were incorporated in four of the seven magazines with swimsuit features sampled. Body size differentials were presented as part of the swimsuit features in three of the magazines sampled. Tips for diverse body type enhancement were included in four of the magazines. All magazines met at least one criterion. One magazine displayed evidence of all three criteria. Preliminary examination suggests that more than half of young women's magazines are upholding elements of the voluntary Code of Conduct for Body Image, through representation of diverse-sized women in their swimsuit issues.

  13. Face-ism and Objectification in Mainstream and LGBT Magazines.

    Cheek, Nathan N

    2016-01-01

    In visual media, men are often shown with more facial prominence than women, a manifestation of sexism that has been labeled face-ism. The present research extended the study of facial prominence and gender representation in media to include magazines aimed at lesbian, gay, bisexual, and transgender (LGBT) audiences for the first time, and also examined whether overall gender differences in facial prominence can still be found in mainstream magazines. Face-ism emerged in Newsweek, but not in Time, The Advocate, or Out. Although there were no overall differences in facial prominence between mainstream and LGBT magazines, there were differences in the facial prominence of men and women among the four magazines included in the present study. These results suggest that face-ism is still a problem, but that it may be restricted to certain magazines. Furthermore, future research may benefit from considering individual magazine titles rather than broader categories of magazines, given that the present study found few similarities between different magazines in the same media category--indeed, Out and Time were more similar to each other than they were to the other magazine in their respective categories.

  14. Transport in JET high performance plasmas

    2001-01-01

    Two type of high performance scenarios have been produced in JET during DTE1 campaign. One of them is the well known and extensively used in the past ELM-free hot ion H-mode scenario which has two distinct regions- plasma core and the edge transport barrier. The results obtained during DTE-1 campaign with D, DT and pure T plasmas confirms our previous conclusion that the core transport scales as a gyroBohm in the inner half of plasma volume, recovers its Bohm nature closer to the separatrix and behaves as ion neoclassical in the transport barrier. Measurements on the top of the barrier suggest that the width of the barrier is dependent upon isotope and moreover suggest that fast ions play a key role. The other high performance scenario is a relatively recently developed Optimised Shear Scenario with small or slightly negative magnetic shear in plasma core. Different mechanisms of Internal Transport Barrier (ITB) formation have been tested by predictive modelling and the results are compared with experimentally observed phenomena. The experimentally observed non-penetration of the heavy impurities through the strong ITB which contradicts to a prediction of the conventional neo-classical theory is discussed. (author)

  15. High-performance computing for airborne applications

    Quinn, Heather M.; Manuzatto, Andrea; Fairbanks, Tom; Dallmann, Nicholas; Desgeorges, Rose

    2010-01-01

    Recently, there has been attempts to move common satellite tasks to unmanned aerial vehicles (UAVs). UAVs are significantly cheaper to buy than satellites and easier to deploy on an as-needed basis. The more benign radiation environment also allows for an aggressive adoption of state-of-the-art commercial computational devices, which increases the amount of data that can be collected. There are a number of commercial computing devices currently available that are well-suited to high-performance computing. These devices range from specialized computational devices, such as field-programmable gate arrays (FPGAs) and digital signal processors (DSPs), to traditional computing platforms, such as microprocessors. Even though the radiation environment is relatively benign, these devices could be susceptible to single-event effects. In this paper, we will present radiation data for high-performance computing devices in a accelerated neutron environment. These devices include a multi-core digital signal processor, two field-programmable gate arrays, and a microprocessor. From these results, we found that all of these devices are suitable for many airplane environments without reliability problems.

  16. Transport in JET high performance plasmas

    1999-01-01

    Two type of high performance scenarios have been produced in JET during DTE1 campaign. One of them is the well known and extensively used in the past ELM-free hot ion H-mode scenario which has two distinct regions- plasma core and the edge transport barrier. The results obtained during DTE-1 campaign with D, DT and pure T plasmas confirms our previous conclusion that the core transport scales as a gyroBohm in the inner half of plasma volume, recovers its Bohm nature closer to the separatrix and behaves as ion neoclassical in the transport barrier. Measurements on the top of the barrier suggest that the width of the barrier is dependent upon isotope and moreover suggest that fast ions play a key role. The other high performance scenario is a relatively recently developed Optimised Shear Scenario with small or slightly negative magnetic shear in plasma core. Different mechanisms of Internal Transport Barrier (ITB) formation have been tested by predictive modelling and the results are compared with experimentally observed phenomena. The experimentally observed non-penetration of the heavy impurities through the strong ITB which contradicts to a prediction of the conventional neo-classical theory is discussed. (author)

  17. High-performance vertical organic transistors.

    Kleemann, Hans; Günther, Alrun A; Leo, Karl; Lüssem, Björn

    2013-11-11

    Vertical organic thin-film transistors (VOTFTs) are promising devices to overcome the transconductance and cut-off frequency restrictions of horizontal organic thin-film transistors. The basic physical mechanisms of VOTFT operation, however, are not well understood and VOTFTs often require complex patterning techniques using self-assembly processes which impedes a future large-area production. In this contribution, high-performance vertical organic transistors comprising pentacene for p-type operation and C60 for n-type operation are presented. The static current-voltage behavior as well as the fundamental scaling laws of such transistors are studied, disclosing a remarkable transistor operation with a behavior limited by injection of charge carriers. The transistors are manufactured by photolithography, in contrast to other VOTFT concepts using self-assembled source electrodes. Fluorinated photoresist and solvent compounds allow for photolithographical patterning directly and strongly onto the organic materials, simplifying the fabrication protocol and making VOTFTs a prospective candidate for future high-performance applications of organic transistors. Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  18. Performance of the CMS High Level Trigger

    Perrotta, Andrea

    2015-01-01

    The CMS experiment has been designed with a 2-level trigger system. The first level is implemented using custom-designed electronics. The second level is the so-called High Level Trigger (HLT), a streamlined version of the CMS offline reconstruction software running on a computer farm. For Run II of the Large Hadron Collider, the increases in center-of-mass energy and luminosity will raise the event rate to a level challenging for the HLT algorithms. The increase in the number of interactions per bunch crossing, on average 25 in 2012, and expected to be around 40 in Run II, will be an additional complication. We present here the expected performance of the main triggers that will be used during the 2015 data taking campaign, paying particular attention to the new approaches that have been developed to cope with the challenges of the new run. This includes improvements in HLT electron and photon reconstruction as well as better performing muon triggers. We will also present the performance of the improved trac...

  19. Development of a High Performance Spacer Grid

    Song, Kee Nam; Song, K. N.; Yoon, K. H. (and others)

    2007-03-15

    A spacer grid in a LWR fuel assembly is a key structural component to support fuel rods and to enhance the heat transfer from the fuel rod to the coolant. In this research, the main research items are the development of inherent and high performance spacer grid shapes, the establishment of mechanical/structural analysis and test technology, and the set-up of basic test facilities for the spacer grid. The main research areas and results are as follows. 1. 18 different spacer grid candidates have been invented and applied for domestic and US patents. Among the candidates 16 are chosen from the patent. 2. Two kinds of spacer grids are finally selected for the advanced LWR fuel after detailed performance tests on the candidates and commercial spacer grids from a mechanical/structural point of view. According to the test results the features of the selected spacer grids are better than those of the commercial spacer grids. 3. Four kinds of basic test facilities are set up and the relevant test technologies are established. 4. Mechanical/structural analysis models and technology for spacer grid performance are developed and the analysis results are compared with the test results to enhance the reliability of the models.

  20. Low cost high performance uncertainty quantification

    Bekas, C.

    2009-01-01

    Uncertainty quantification in risk analysis has become a key application. In this context, computing the diagonal of inverse covariance matrices is of paramount importance. Standard techniques, that employ matrix factorizations, incur a cubic cost which quickly becomes intractable with the current explosion of data sizes. In this work we reduce this complexity to quadratic with the synergy of two algorithms that gracefully complement each other and lead to a radically different approach. First, we turned to stochastic estimation of the diagonal. This allowed us to cast the problem as a linear system with a relatively small number of multiple right hand sides. Second, for this linear system we developed a novel, mixed precision, iterative refinement scheme, which uses iterative solvers instead of matrix factorizations. We demonstrate that the new framework not only achieves the much needed quadratic cost but in addition offers excellent opportunities for scaling at massively parallel environments. We based our implementation on BLAS 3 kernels that ensure very high processor performance. We achieved a peak performance of 730 TFlops on 72 BG/P racks, with a sustained performance 73% of theoretical peak. We stress that the techniques presented in this work are quite general and applicable to several other important applications. Copyright © 2009 ACM.

  1. Energy Efficient Graphene Based High Performance Capacitors.

    Bae, Joonwon; Kwon, Oh Seok; Lee, Chang-Soo

    2017-07-10

    Graphene (GRP) is an interesting class of nano-structured electronic materials for various cutting-edge applications. To date, extensive research activities have been performed on the investigation of diverse properties of GRP. The incorporation of this elegant material can be very lucrative in terms of practical applications in energy storage/conversion systems. Among various those systems, high performance electrochemical capacitors (ECs) have become popular due to the recent need for energy efficient and portable devices. Therefore, in this article, the application of GRP for capacitors is described succinctly. In particular, a concise summary on the previous research activities regarding GRP based capacitors is also covered extensively. It was revealed that a lot of secondary materials such as polymers and metal oxides have been introduced to improve the performance. Also, diverse devices have been combined with capacitors for better use. More importantly, recent patents related to the preparation and application of GRP based capacitors are also introduced briefly. This article can provide essential information for future study. Copyright© Bentham Science Publishers; For any queries, please email at epub@benthamscience.org.

  2. SISYPHUS: A high performance seismic inversion factory

    Gokhberg, Alexey; Simutė, Saulė; Boehm, Christian; Fichtner, Andreas

    2016-04-01

    In the recent years the massively parallel high performance computers became the standard instruments for solving the forward and inverse problems in seismology. The respective software packages dedicated to forward and inverse waveform modelling specially designed for such computers (SPECFEM3D, SES3D) became mature and widely available. These packages achieve significant computational performance and provide researchers with an opportunity to solve problems of bigger size at higher resolution within a shorter time. However, a typical seismic inversion process contains various activities that are beyond the common solver functionality. They include management of information on seismic events and stations, 3D models, observed and synthetic seismograms, pre-processing of the observed signals, computation of misfits and adjoint sources, minimization of misfits, and process workflow management. These activities are time consuming, seldom sufficiently automated, and therefore represent a bottleneck that can substantially offset performance benefits provided by even the most powerful modern supercomputers. Furthermore, a typical system architecture of modern supercomputing platforms is oriented towards the maximum computational performance and provides limited standard facilities for automation of the supporting activities. We present a prototype solution that automates all aspects of the seismic inversion process and is tuned for the modern massively parallel high performance computing systems. We address several major aspects of the solution architecture, which include (1) design of an inversion state database for tracing all relevant aspects of the entire solution process, (2) design of an extensible workflow management framework, (3) integration with wave propagation solvers, (4) integration with optimization packages, (5) computation of misfits and adjoint sources, and (6) process monitoring. The inversion state database represents a hierarchical structure with

  3. Ultra high performance concrete dematerialization study

    NONE

    2004-03-01

    Concrete is the most widely used building material in the world and its use is expected to grow. It is well recognized that the production of portland cement results in the release of large amounts of carbon dioxide, a greenhouse gas (GHG). The main challenge facing the industry is to produce concrete in an environmentally sustainable manner. Reclaimed industrial by-proudcts such as fly ash, silica fume and slag can reduce the amount of portland cement needed to make concrete, thereby reducing the amount of GHGs released to the atmosphere. The use of these supplementary cementing materials (SCM) can also enhance the long-term strength and durability of concrete. The intention of the EcoSmart{sup TM} Concrete Project is to develop sustainable concrete through innovation in supply, design and construction. In particular, the project focuses on finding a way to minimize the GHG signature of concrete by maximizing the replacement of portland cement in the concrete mix with SCM while improving the cost, performance and constructability. This paper describes the use of Ductal{sup R} Ultra High Performance Concrete (UHPC) for ramps in a condominium. It examined the relationship between the selection of UHPC and the overall environmental performance, cost, constructability maintenance and operational efficiency as it relates to the EcoSmart Program. The advantages and challenges of using UHPC were outlined. In addition to its very high strength, UHPC has been shown to have very good potential for GHG emission reduction due to the reduced material requirements, reduced transport costs and increased SCM content. refs., tabs., figs.

  4. JT-60U high performance regimes

    Ishida, S.

    1999-01-01

    High performance regimes of JT-60U plasmas are presented with an emphasis upon the results from the use of a semi-closed pumped divertor with W-shaped geometry. Plasma performance in transient and quasi steady states has been significantly improved in reversed shear and high- βp regimes. The reversed shear regime elevated an equivalent Q DT eq transiently up to 1.25 (n D (0)τ E T i (0)=8.6x10 20 m-3·s·keV) in a reactor-relevant thermonuclear dominant regime. Long sustainment of enhanced confinement with internal transport barriers (ITBs) with a fully non-inductive current drive in a reversed shear discharge was successfully demonstrated with LH wave injection. Performance sustainment has been extended in the high- bp regime with a high triangularity achieving a long sustainment of plasma conditions equivalent to Q DT eq ∼0.16 (n D (0)τ E T i (0)∼1.4x10 20 m -3 ·s·keV) for ∼4.5 s with a large non-inductive current drive fraction of 60-70% of the plasma current. Thermal and particle transport analyses show significant reduction of thermal and particle diffusivities around ITB resulting in a strong Er shear in the ITB region. The W-shaped divertor is effective for He ash exhaust demonstrating steady exhaust capability of τ He */τ E ∼3-10 in support of ITER. Suppression of neutral back flow and chemical sputtering effect have been observed while MARFE onset density is rather decreased. Negative-ion based neutral beam injection (N-NBI) experiments have created a clear H-mode transition. Enhanced ionization cross- section due to multi-step ionization processes was confirmed as theoretically predicted. A current density profile driven by N-NBI is measured in a good agreement with theoretical prediction. N-NBI induced TAE modes characterized as persistent and bursting oscillations have been observed from a low hot beta of h >∼0.1-0.2% without a significant loss of fast ions. (author)

  5. High-performance phase-field modeling

    Vignal, Philippe

    2015-04-27

    Many processes in engineering and sciences involve the evolution of interfaces. Among the mathematical frameworks developed to model these types of problems, the phase-field method has emerged as a possible solution. Phase-fields nonetheless lead to complex nonlinear, high-order partial differential equations, whose solution poses mathematical and computational challenges. Guaranteeing some of the physical properties of the equations has lead to the development of efficient algorithms and discretizations capable of recovering said properties by construction [2, 5]. This work builds-up on these ideas, and proposes novel discretization strategies that guarantee numerical energy dissipation for both conserved and non-conserved phase-field models. The temporal discretization is based on a novel method which relies on Taylor series and ensures strong energy stability. It is second-order accurate, and can also be rendered linear to speed-up the solution process [4]. The spatial discretization relies on Isogeometric Analysis, a finite element method that possesses the k-refinement technology and enables the generation of high-order, high-continuity basis functions. These basis functions are well suited to handle the high-order operators present in phase-field models. Two-dimensional and three dimensional results of the Allen-Cahn, Cahn-Hilliard, Swift-Hohenberg and phase-field crystal equation will be presented, which corroborate the theoretical findings, and illustrate the robustness of the method. Results related to more challenging examples, namely the Navier-Stokes Cahn-Hilliard and a diusion-reaction Cahn-Hilliard system, will also be presented. The implementation was done in PetIGA and PetIGA-MF, high-performance Isogeometric Analysis frameworks [1, 3], designed to handle non-linear, time-dependent problems.

  6. High performance visual display for HENP detectors

    McGuigan, Michael; Smith, Gordon; Spiletic, John; Fine, Valeri; Nevski, Pavel

    2001-01-01

    A high end visual display for High Energy Nuclear Physics (HENP) detectors is necessary because of the sheer size and complexity of the detector. For BNL this display will be of special interest because of STAR and ATLAS. To load, rotate, query, and debug simulation code with a modern detector simply takes too long even on a powerful work station. To visualize the HENP detectors with maximal performance we have developed software with the following characteristics. We develop a visual display of HENP detectors on BNL multiprocessor visualization server at multiple level of detail. We work with general and generic detector framework consistent with ROOT, GAUDI etc, to avoid conflicting with the many graphic development groups associated with specific detectors like STAR and ATLAS. We develop advanced OpenGL features such as transparency and polarized stereoscopy. We enable collaborative viewing of detector and events by directly running the analysis in BNL stereoscopic theatre. We construct enhanced interactive control, including the ability to slice, search and mark areas of the detector. We incorporate the ability to make a high quality still image of a view of the detector and the ability to generate animations and a fly through of the detector and output these to MPEG or VRML models. We develop data compression hardware and software so that remote interactive visualization will be possible among dispersed collaborators. We obtain real time visual display for events accumulated during simulations

  7. Development of high performance ODS alloys

    Shao, Lin [Texas A & M Univ., College Station, TX (United States); Gao, Fei [Univ. of Michigan, Ann Arbor, MI (United States); Garner, Frank [Texas A & M Univ., College Station, TX (United States)

    2018-01-29

    This project aims to capitalize on insights developed from recent high-dose self-ion irradiation experiments in order to develop and test the next generation of optimized ODS alloys needed to meet the nuclear community's need for high strength, radiation-tolerant cladding and core components, especially with enhanced resistance to void swelling. Two of these insights are that ferrite grains swell earlier than tempered martensite grains, and oxide dispersions currently produced only in ferrite grains require a high level of uniformity and stability to be successful. An additional insight is that ODS particle stability is dependent on as-yet unidentified compositional combinations of dispersoid and alloy matrix, such as dispersoids are stable in MA957 to doses greater than 200 dpa but dissolve in MA956 at doses less than 200 dpa. These findings focus attention on candidate next-generation alloys which address these concerns. Collaboration with two Japanese groups provides this project with two sets of first-round candidate alloys that have already undergone extensive development and testing for unirradiated properties, but have not yet been evaluated for their irradiation performance. The first set of candidate alloys are dual phase (ferrite + martensite) ODS alloys with oxide particles uniformly distributed in both ferrite and martensite phases. The second set of candidate alloys are ODS alloys containing non-standard dispersoid compositions with controllable oxide particle sizes, phases and interfaces.

  8. Low-Cost High-Performance MRI

    Sarracanie, Mathieu; Lapierre, Cristen D.; Salameh, Najat; Waddington, David E. J.; Witzel, Thomas; Rosen, Matthew S.

    2015-10-01

    Magnetic Resonance Imaging (MRI) is unparalleled in its ability to visualize anatomical structure and function non-invasively with high spatial and temporal resolution. Yet to overcome the low sensitivity inherent in inductive detection of weakly polarized nuclear spins, the vast majority of clinical MRI scanners employ superconducting magnets producing very high magnetic fields. Commonly found at 1.5-3 tesla (T), these powerful magnets are massive and have very strict infrastructure demands that preclude operation in many environments. MRI scanners are costly to purchase, site, and maintain, with the purchase price approaching $1 M per tesla (T) of magnetic field. We present here a remarkably simple, non-cryogenic approach to high-performance human MRI at ultra-low magnetic field, whereby modern under-sampling strategies are combined with fully-refocused dynamic spin control using steady-state free precession techniques. At 6.5 mT (more than 450 times lower than clinical MRI scanners) we demonstrate (2.5 × 3.5 × 8.5) mm3 imaging resolution in the living human brain using a simple, open-geometry electromagnet, with 3D image acquisition over the entire brain in 6 minutes. We contend that these practical ultra-low magnetic field implementations of MRI (standards for affordable (<$50,000) and robust portable devices.

  9. High Performance Computing in Science and Engineering '15 : Transactions of the High Performance Computing Center

    Kröner, Dietmar; Resch, Michael

    2016-01-01

    This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2015. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance. The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

  10. High Performance Computing in Science and Engineering '17 : Transactions of the High Performance Computing Center

    Kröner, Dietmar; Resch, Michael; HLRS 2017

    2018-01-01

    This book presents the state-of-the-art in supercomputer simulation. It includes the latest findings from leading researchers using systems from the High Performance Computing Center Stuttgart (HLRS) in 2017. The reports cover all fields of computational science and engineering ranging from CFD to computational physics and from chemistry to computer science with a special emphasis on industrially relevant applications. Presenting findings of one of Europe’s leading systems, this volume covers a wide variety of applications that deliver a high level of sustained performance.The book covers the main methods in high-performance computing. Its outstanding results in achieving the best performance for production codes are of particular interest for both scientists and engineers. The book comes with a wealth of color illustrations and tables of results.

  11. Thermal interface pastes nanostructured for high performance

    Lin, Chuangang

    Thermal interface materials in the form of pastes are needed to improve thermal contacts, such as that between a microprocessor and a heat sink of a computer. High-performance and low-cost thermal pastes have been developed in this dissertation by using polyol esters as the vehicle and various nanoscale solid components. The proportion of a solid component needs to be optimized, as an excessive amount degrades the performance, due to the increase in the bond line thickness. The optimum solid volume fraction tends to be lower when the mating surfaces are smoother, and higher when the thermal conductivity is higher. Both a low bond line thickness and a high thermal conductivity help the performance. When the surfaces are smooth, a low bond line thickness can be even more important than a high thermal conductivity, as shown by the outstanding performance of the nanoclay paste of low thermal conductivity in the smooth case (0.009 mum), with the bond line thickness less than 1 mum, as enabled by low storage modulus G', low loss modulus G" and high tan delta. However, for rough surfaces, the thermal conductivity is important. The rheology affects the bond line thickness, but it does not correlate well with the performance. This study found that the structure of carbon black is an important parameter that governs the effectiveness of a carbon black for use in a thermal paste. By using a carbon black with a lower structure (i.e., a lower DBP value), a thermal paste that is more effective than the previously reported carbon black paste was obtained. Graphite nanoplatelet (GNP) was found to be comparable in effectiveness to carbon black (CB) pastes for rough surfaces, but it is less effective for smooth surfaces. At the same filler volume fraction, GNP gives higher thermal conductivity than carbon black paste. At the same pressure, GNP gives higher bond line thickness than CB (Tokai or Cabot). The effectiveness of GNP is limited, due to the high bond line thickness. A

  12. High performance liquid chromatography in pharmaceutical analyses

    Branko Nikolin

    2004-05-01

    Full Text Available In testing the pre-sale procedure the marketing of drugs and their control in the last ten years, high performance liquid chromatographyreplaced numerous spectroscopic methods and gas chromatography in the quantitative and qualitative analysis. In the first period of HPLC application it was thought that it would become a complementary method of gas chromatography, however, today it has nearly completely replaced gas chromatography in pharmaceutical analysis. The application of the liquid mobile phase with the possibility of transformation of mobilized polarity during chromatography and all other modifications of mobile phase depending upon the characteristics of substance which are being tested, is a great advantage in the process of separation in comparison to other methods. The greater choice of stationary phase is the next factor which enables realization of good separation. The separation line is connected to specific and sensitive detector systems, spectrafluorimeter, diode detector, electrochemical detector as other hyphernated systems HPLC-MS and HPLC-NMR, are the basic elements on which is based such wide and effective application of the HPLC method. The purpose high performance liquid chromatography(HPLC analysis of any drugs is to confirm the identity of a drug and provide quantitative results and also to monitor the progress of the therapy of a disease.1 Measuring presented on the Fig. 1. is chromatogram obtained for the plasma of depressed patients 12 h before oral administration of dexamethasone. It may also be used to further our understanding of the normal and disease process in the human body trough biomedical and therapeutically research during investigation before of the drugs registration. The analyses of drugs and metabolites in biological fluids, particularly plasma, serum or urine is one of the most demanding but one of the most common uses of high performance of liquid chromatography. Blood, plasma or

  13. Combining high productivity with high performance on commodity hardware

    Skovhede, Kenneth

    -like compiler for translating CIL bytecode on the CELL-BE. I then introduce a bytecode converter that transforms simple loops in Java bytecode to GPGPU capable code. I then introduce the numeric library for the Common Intermediate Language, NumCIL. I can then utilizing the vector programming model from Num......CIL and map this to the Bohrium framework. The result is a complete system that gives the user a choice of high-level languages with no explicit parallelism, yet seamlessly performs efficient execution on a number of hardware setups....

  14. Integrating advanced facades into high performance buildings

    Selkowitz, Stephen E.

    2001-01-01

    Glass is a remarkable material but its functionality is significantly enhanced when it is processed or altered to provide added intrinsic capabilities. The overall performance of glass elements in a building can be further enhanced when they are designed to be part of a complete facade system. Finally the facade system delivers the greatest performance to the building owner and occupants when it becomes an essential element of a fully integrated building design. This presentation examines the growing interest in incorporating advanced glazing elements into more comprehensive facade and building systems in a manner that increases comfort, productivity and amenity for occupants, reduces operating costs for building owners, and contributes to improving the health of the planet by reducing overall energy use and negative environmental impacts. We explore the role of glazing systems in dynamic and responsive facades that provide the following functionality: Enhanced sun protection and cooling load control while improving thermal comfort and providing most of the light needed with daylighting; Enhanced air quality and reduced cooling loads using natural ventilation schemes employing the facade as an active air control element; Reduced operating costs by minimizing lighting, cooling and heating energy use by optimizing the daylighting-thermal tradeoffs; Net positive contributions to the energy balance of the building using integrated photovoltaic systems; Improved indoor environments leading to enhanced occupant health, comfort and performance. In addressing these issues facade system solutions must, of course, respect the constraints of latitude, location, solar orientation, acoustics, earthquake and fire safety, etc. Since climate and occupant needs are dynamic variables, in a high performance building the facade solution have the capacity to respond and adapt to these variable exterior conditions and to changing occupant needs. This responsive performance capability

  15. Aerospace Knowledge Magazine (Selected Articles),

    1986-01-15

    country employed Soviet fighters. It was reported in foreign journals that there was no Doppler navigation system on these aircraft. Furthermore, a Sirena 2...radar warning and homing system with poorer performance was used instead of the Sirena 3 which provides 3600 coverage. The iden- tification friend or

  16. Trends in exposure to pro-tobacco advertisements over the Internet, in newspapers/magazines, and at retail stores among U.S. middle and high school students, 2000-2012.

    Agaku, Israel T; King, Brian A; Dube, Shanta R

    2014-01-01

    Most tobacco use begins during youth. Thus, this study assessed the prevalence, trends, and correlates of pro-tobacco advertising among United States students in grades 6-12 during 2000-2012. Data from the 2000-2012 National Youth Tobacco Survey were analyzed to assess self-reported exposure to pro-tobacco advertisements through three media: over the Internet, in newspapers/magazines, and at retail stores. Trends during 2000-2012 were assessed in a binary logistic regression model (Pmagazines (65.0% to 36.9%) and at retail stores (87.8% to 76.2%) (Pmagazines, and at retail stores occurred during the same period. However, over two-thirds of students still reported retail store exposure to pro-tobacco advertisements in 2012. Enhanced and sustained efforts would be beneficial to reduce even more exposure to all forms of pro-tobacco advertisements among youths. © 2013.

  17. The need for high performance breeder reactors

    Vaughan, R.D.; Chermanne, J.

    1977-01-01

    It can be easily demonstrated, on the basis of realistic estimates of continued high oil costs, that an increasing portion of the growth in energy demand must be supplied by nuclear power and that this one might account for 20% of all the energy production by the end of the century. Such assumptions lead very quickly to the conclusion that the discovery, extraction and processing of the uranium will not be able to follow the demand; the bottleneck will essentially be related to the rate at which the ore can be discovered and extracted, and not to the existing quantities nor their grade. Figures as high as 150.000 T/annum and more would be quickly reached, and it is necessary to wonder already now if enough capital can be attracted to meet these requirements. There is only one solution to this problem: improve the conversion ratio of the nuclear system and quickly reach the breeding; this would lead to the reduction of the natural uranium consumption by a factor of about 50. However, this condition is not sufficient; the commercial breeder must have a breeding gain as high as possible because the Pu out-of-pile time and the Pu losses in the cycle could lead to an unacceptable doubling time for the system, if the breeding gain is too low. That is the reason why it is vital to develop high performance breeder reactors. The present paper indicates how the Gas-cooled Breeder Reactor [GBR] can meet the problems mentioned above, on the basis of recent and realistic studies. It briefly describes the present status of GBR development, from the predecessors in the gas cooled reactor line, particularly the AGR. It shows how the GBR fuel takes mostly profit from the LMFBR fuel irradiation experience. It compares the GBR performance on a consistent basis with that of the LMFBR. The GBR capital and fuel cycle costs are compared with those of thermal and fast reactors respectively. The conclusion is, based on a cost-benefit study, that the GBR must be quickly developed in order

  18. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  19. How to create high-performing teams.

    Lam, Samuel M

    2010-02-01

    This article is intended to discuss inspirational aspects on how to lead a high-performance team. Cogent topics discussed include how to hire staff through methods of "topgrading" with reference to Geoff Smart and "getting the right people on the bus" referencing Jim Collins' work. In addition, once the staff is hired, this article covers how to separate the "eagles from the ducks" and how to inspire one's staff by creating the right culture with suggestions for further reading by Don Miguel Ruiz (The four agreements) and John Maxwell (21 Irrefutable laws of leadership). In addition, Simon Sinek's concept of "Start with Why" is elaborated to help a leader know what the core element should be with any superior culture. Thieme Medical Publishers.

  20. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D. [KAERI, Taejon (Korea, Republic of); Kim, E. K.; Jung, S. Y.; Ryu, H. J. [KRICT, Taejon (Korea, Republic of); Hwang, S. S.; Kim, J. K.; Hong, S. M. [KIST, Taejon (Korea, Republic of); Chea, Y. B. [KIGAM, Taejon (Korea, Republic of); Choi, C. H.; Kim, S. D. [ATS, Taejon (Korea, Republic of); Cho, B. G.; Lee, S. H. [HGREC, Taejon (Korea, Republic of)

    1999-06-15

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  1. High performance nano-composite technology development

    Kim, Whung Whoe; Rhee, C. K.; Kim, S. J.; Park, S. D.; Kim, E. K.; Jung, S. Y.; Ryu, H. J.; Hwang, S. S.; Kim, J. K.; Hong, S. M.; Chea, Y. B.; Choi, C. H.; Kim, S. D.; Cho, B. G.; Lee, S. H.

    1999-06-01

    The trend of new material development are being to carried out not only high performance but also environmental attraction. Especially nano composite material which enhances the functional properties of components, extending the component life resulting to reduced the wastes and environmental contamination, has a great effect on various industrial area. The application of nano composite, depends on the polymer matrix and filler materials, has various application from semiconductor to medical field. In spite of nano composite merits, nano composite study are confined to a few special materials as a lab, scale because a few technical difficulties are still on hold. Therefore, the purpose of this study establishes the systematical planning to carried out the next generation projects on order to compete with other countries and overcome the protective policy of advanced countries with grasping over sea's development trends and our present status. (author).

  2. High Performance with Prescriptive Optimization and Debugging

    Jensen, Nicklas Bo

    parallelization and automatic vectorization is attractive as it transparently optimizes programs. The thesis contributes an improved dependence analysis for explicitly parallel programs. These improvements lead to more loops being vectorized, on average we achieve a speedup of 1.46 over the existing dependence...... analysis and vectorizer in GCC. Automatic optimizations often fail for theoretical and practical reasons. When they fail we argue that a hybrid approach can be effective. Using compiler feedback, we propose to use the programmer’s intuition and insight to achieve high performance. Compiler feedback...... enlightens the programmer why a given optimization was not applied, and suggest how to change the source code to make it more amenable to optimizations. We show how this can yield significant speedups and achieve 2.4 faster execution on a real industrial use case. To aid in parallel debugging we propose...

  3. Optimizing High Performance Self Compacting Concrete

    Raymond A Yonathan

    2017-01-01

    Full Text Available This paper’s objectives are to learn the effect of glass powder, silica fume, Polycarboxylate Ether, and gravel to optimizing composition of each factor in making High Performance SCC. Taguchi method is proposed in this paper as best solution to minimize specimen variable which is more than 80 variations. Taguchi data analysis method is applied to provide composition, optimizing, and the effect of contributing materials for nine variable of specimens. Concrete’s workability was analyzed using Slump flow test, V-funnel test, and L-box test. Compressive and porosity test were performed for the hardened state. With a dimension of 100×200 mm the cylindrical specimens were cast for compressive test with the age of 3, 7, 14, 21, 28 days. Porosity test was conducted at 28 days. It is revealed that silica fume contributes greatly to slump flow and porosity. Coarse aggregate shows the greatest contributing factor to L-box and compressive test. However, all factors show unclear result to V-funnel test.

  4. High Performance Circularly Polarized Microstrip Antenna

    Bondyopadhyay, Probir K. (Inventor)

    1997-01-01

    A microstrip antenna for radiating circularly polarized electromagnetic waves comprising a cluster array of at least four microstrip radiator elements, each of which is provided with dual orthogonal coplanar feeds in phase quadrature relation achieved by connection to an asymmetric T-junction power divider impedance notched at resonance. The dual fed circularly polarized reference element is positioned with its axis at a 45 deg angle with respect to the unit cell axis. The other three dual fed elements in the unit cell are positioned and fed with a coplanar feed structure with sequential rotation and phasing to enhance the axial ratio and impedance matching performance over a wide bandwidth. The centers of the radiator elements are disposed at the corners of a square with each side of a length d in the range of 0.7 to 0.9 times the free space wavelength of the antenna radiation and the radiator elements reside in a square unit cell area of sides equal to 2d and thereby permit the array to be used as a phased array antenna for electronic scanning and is realizable in a high temperature superconducting thin film material for high efficiency.

  5. NCI's Transdisciplinary High Performance Scientific Data Platform

    Evans, Ben; Antony, Joseph; Bastrakova, Irina; Car, Nicholas; Cox, Simon; Druken, Kelsey; Evans, Bradley; Fraser, Ryan; Ip, Alex; Kemp, Carina; King, Edward; Minchin, Stuart; Larraondo, Pablo; Pugh, Tim; Richards, Clare; Santana, Fabiana; Smillie, Jon; Trenham, Claire; Wang, Jingbo; Wyborn, Lesley

    2016-04-01

    The Australian National Computational Infrastructure (NCI) manages Earth Systems data collections sourced from several domains and organisations onto a single High Performance Data (HPD) Node to further Australia's national priority research and innovation agenda. The NCI HPD Node has rapidly established its value, currently managing over 10 PBytes of datasets from collections that span a wide range of disciplines including climate, weather, environment, geoscience, geophysics, water resources and social sciences. Importantly, in order to facilitate broad user uptake, maximise reuse and enable transdisciplinary access through software and standardised interfaces, the datasets, associated information systems and processes have been incorporated into the design and operation of a unified platform that NCI has called, the National Environmental Research Data Interoperability Platform (NERDIP). The key goal of the NERDIP is to regularise data access so that it is easily discoverable, interoperable for different domains and enabled for high performance methods. It adopts and implements international standards and data conventions, and promotes scientific integrity within a high performance computing and data analysis environment. NCI has established a rich and flexible computing environment to access to this data, through the NCI supercomputer; a private cloud that supports both domain focused virtual laboratories and in-common interactive analysis interfaces; as well as remotely through scalable data services. Data collections of this importance must be managed with careful consideration of both their current use and the needs of the end-communities, as well as its future potential use, such as transitioning to more advanced software and improved methods. It is therefore critical that the data platform is both well-managed and trusted for stable production use (including transparency and reproducibility), agile enough to incorporate new technological advances and

  6. High Power Flex-Propellant Arcjet Performance

    Litchford, Ron J.

    2011-01-01

    implied nearly frozen flow in the nozzle and yielded performance ranges of 800-1100 sec for hydrogen and 400-600 sec for ammonia. Inferred thrust-to-power ratios were in the range of 30-10 lbf/MWe for hydrogen and 60-20 lbf/MWe for ammonia. Successful completion of this test series represents a fundamental milestone in the progression of high power arcjet technology, and it is hoped that the results may serve as a reliable touchstone for the future development of MW-class regeneratively-cooled flex-propellant plasma rockets.

  7. Women's magazine coverage of heart disease risk factors: Good Housekeeping magazine, 1997 to 2007.

    Edy, Carolyn M

    2010-03-01

    Women, who often turn to magazines for health information, continue to underestimate their risk for heart disease, though it remains the leading cause of death among women in the United States. This textual analysis considered the portrayal of women's risk factors for heart disease as problem and remedy frames within articles published by the highest circulation women's magazine in the U.S., Good Housekeeping, from 1997 to 2007. These findings were then compared with corresponding information endorsed by the American Heart Association. Far from underestimating a woman's risk for heart disease, GH articles seemed to target women at low risk for heart disease, while emphasizing risk factors unique to women. The magazine coverage was largely consistent with American Heart Association information, yet offered a broader range of treatment and prevention strategies that were sometimes contradictory or vague. One significant risk factor, race, was not mentioned in the magazine articles. This review calls for future research to determine the pervasiveness and possible effects of such coverage.

  8. Silicon Photomultiplier Performance in High ELectric Field

    Montoya, J.; Morad, J.

    2016-12-01

    Roughly 27% of the universe is thought to be composed of dark matter. The Large Underground Xenon (LUX) relies on the emission of light from xenon atoms after a collision with a dark matter particle. After a particle interaction in the detector, two things can happen: the xenon will emit light and charge. The charge (electrons), in the liquid xenon needs to be pulled into the gas section so that it can interact with gas and emit light. This allows LUX to convert a single electron into many photons. This is done by applying a high voltage across the liquid and gas regions, effectively ripping electrons out of the liquid xenon and into the gas. The current device used to detect photons is the photomultiplier tube (PMT). These devices are large and costly. In recent years, a new technology that is capable of detecting single photons has emerged, the silicon photomultiplier (SiPM). These devices are cheaper and smaller than PMTs. Their performance in a high electric fields, such as those found in LUX, are unknown. It is possible that a large electric field could introduce noise on the SiPM signal, drowning the single photon detection capability. My hypothesis is that SiPMs will not observe a significant increase is noise at an electric field of roughly 10kV/cm (an electric field within the range used in detectors like LUX). I plan to test this hypothesis by first rotating the SiPMs with no applied electric field between two metal plates roughly 2 cm apart, providing a control data set. Then using the same angles test the dark counts with the constant electric field applied. Possibly the most important aspect of LUX, is the photon detector because it's what detects the signals. Dark matter is detected in the experiment by looking at the ratio of photons to electrons emitted for a given interaction in the detector. Interactions with a low electron to photon ratio are more like to be dark matter events than those with a high electron to photon ratio. The ability to

  9. The Role of Performance Management in the High Performance Organisation

    de Waal, André A.; van der Heijden, Beatrice I.J.M.

    2014-01-01

    The allegiance of partnering organisations and their employees to an Extended Enterprise performance is its proverbial sword of Damocles. Literature on Extended Enterprises focuses on collaboration, inter-organizational integration and learning to avoid diminishing or missing allegiance becoming an

  10. Evaluating performance of high efficiency mist eliminators

    Waggoner, Charles A.; Parsons, Michael S.; Giffin, Paxton K. [Mississippi State University, Institute for Clean Energy Technology, 205 Research Blvd, Starkville, MS (United States)

    2013-07-01

    Processing liquid wastes frequently generates off gas streams with high humidity and liquid aerosols. Droplet laden air streams can be produced from tank mixing or sparging and processes such as reforming or evaporative volume reduction. Unfortunately these wet air streams represent a genuine threat to HEPA filters. High efficiency mist eliminators (HEME) are one option for removal of liquid aerosols with high dissolved or suspended solids content. HEMEs have been used extensively in industrial applications, however they have not seen widespread use in the nuclear industry. Filtering efficiency data along with loading curves are not readily available for these units and data that exist are not easily translated to operational parameters in liquid waste treatment plants. A specialized test stand has been developed to evaluate the performance of HEME elements under use conditions of a US DOE facility. HEME elements were tested at three volumetric flow rates using aerosols produced from an iron-rich waste surrogate. The challenge aerosol included submicron particles produced from Laskin nozzles and super micron particles produced from a hollow cone spray nozzle. Test conditions included ambient temperature and relative humidities greater than 95%. Data collected during testing HEME elements from three different manufacturers included volumetric flow rate, differential temperature across the filter housing, downstream relative humidity, and differential pressure (dP) across the filter element. Filter challenge was discontinued at three intermediate dPs and the filter to allow determining filter efficiency using dioctyl phthalate and then with dry surrogate aerosols. Filtering efficiencies of the clean HEME, the clean HEME loaded with water, and the HEME at maximum dP were also collected using the two test aerosols. Results of the testing included differential pressure vs. time loading curves for the nine elements tested along with the mass of moisture and solid

  11. Women's Magazines' Coverage of Smoking Related Health Hazards.

    Kessler, Lauren

    1989-01-01

    Examines the extent to which women's magazines with a strong interest in health covered various health hazards associated with smoking. Finds that six major women's magazines have virtually no coverage of smoking and cancer. Suggests that self-censorship may have helped determine editorial content more than pressure from tobacco companies. (RS)

  12. The impact of Arizona Highways Magazine on tourism.

    2012-03-01

    The purpose of this study was to: 1) examine the effect of Arizona Highways Magazine (AHM) on tourism, 2) determine trip : characteristics of AHM subscribers traveling in Arizona, and 3) calculate a benefit/cost ratio for AHM based on the : magazine...

  13. 46 CFR 194.10-10 - Integral magazine construction.

    2010-10-01

    ... spaces suitable approved incombustible thermal insulation shall be provided to prevent condensation of moisture. (c) Where a tank top forms the magazine deck it shall be insulated with an approved deck covering to prevent condensation of moisture. Tank top manholes shall not be installed in magazines. (d) Light...

  14. Magazine Coverage of Child Sexual Abuse, 1992-2004

    Cheit, Ross E.; Shavit, Yael; Reiss-Davis, Zachary

    2010-01-01

    This article analyzes trends in the coverage of child sexual abuse in popular magazines since the early 1990s. The article employs systematic analysis to identify and analyze articles in four popular magazines. Articles are analyzed by subject, length, and publication. The results affirm established theories of newsworthiness related to the…

  15. Nutrition Advertisements in Consumer Magazines: Health Implications for African Americans.

    Pratt, Charlotte A.; Pratt, Cornelius B.

    1996-01-01

    Examines the "Ladies' Home Journal" and two popular consumer magazines that target blacks to determine the proportions of food and beverage advertisements, nutrition advertisements and their promotional messages, and the health implications they reveal. Findings reveal these magazines had a significantly higher number of alcohol ads,…

  16. A Content Analysis of Cognitive Health Promotion in Popular Magazines

    Friedman, Daniela B.; Laditka, Sarah B.; Laditka, James N.; Price, Anna E.

    2011-01-01

    Health behaviors, particularly physical activity, may promote cognitive health. The public agenda for health behaviors is influenced by popular media. We analyzed the cognitive health content of 20 United States magazines, examining every page of every 2006-2007 issue of the highest circulating magazines for general audiences, women, men, African…

  17. "Mid-Week Pictorial": Pioneer American Photojournalism Magazine.

    Kenney, Keith

    In 1914 (22 years before the inception of "Life" magazine), the "New York Times" began publishing "Mid-Week Pictorial" to absorb a flood of war pictures pouring in from Europe. Several sociological and technological forces shaped "Mid-Week Pictorial" as a pioneer of American photojournalism magazines,…

  18. 27 CFR 555.207 - Construction of type 1 magazines.

    2010-04-01

    ... constructed of, or covered with, a nonsparking material. (3) Wood frame wall construction. The exterior of... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Construction of type 1... Construction of type 1 magazines. A type 1 magazine is a permanent structure: a building, an igloo or “Army...

  19. Customer magazines: Effects of commerciality on readers’ reactions

    van Reijmersdal, E.A.; Neijens, P.C.; Smit, E.G.

    2010-01-01

    This study is the first to focus on effects of commerciality of customer magazines on readers’ reactions. The experiment (N=349 students) involves six versions of the same customer magazine that vary along two dimensions of commerciality: the amount of brand integration (0%, 50%, or 100%) and the

  20. The Original Handhelds: Magazines that Teens Can't Resist.

    Webber, Carlie

    2009-01-01

    In a world of instant messages, Twitter, and Facebook, what do magazines have to offer teens? Well, as it turns out, plenty. For starters, they feature celebrity gossip, humor, beauty tips, sports, and even manga. Some magazines offer online content that can only be accessed by using a special code that's available in the print edition. Recently,…

  1. Magazine and Newspaper Prices: The Effect of Advertising Revenue.

    Norris, Vincent P.

    A review of the literature reveals that publishers have suggested that magazines would cost twice as much and newspapers five times as much if they were not supported by advertising revenues. However, recent research indicates that this is not true. Although statistics regarding magazine publication are easier to obtain than those regarding…

  2. Firearm Advertising: Product Depiction in Consumer Gun Magazines

    Saylor, Elizabeth A.; Vittes, Katherine A.; Sorenson, Susan B.

    2004-01-01

    In contrast to tobacco, alcohol, and other consumer products associated with health risks, we know very little about how firearm manufacturers advertise their products. The authors examined advertisements for firearms in all 27 ad-accepting magazines listed in "Bacon's Magazine Directory" "guns and shooting" category. Sixty-three manufacturers…

  3. Predicting Magazine Audiences with a Loglinear Model.

    1987-07-01

    TITLE (InciudeSecuirty Clauificalson, Predicting !iagaz:ine Atidiences with a Loglinvar \\lode] * 12. PERSONAL AUTHOR(S) * Peter J.1 .:)anahel 1 3&. TYPE...important use of e.d. estimates is in media selection ( Aaker 1975; Lee 1962, 1963; Little and Lodish 1969). All advertising campaigns have a budget. It...BBD we obtain the modified BBD (MBBD). Let X be the number of exposures a person has to k insertions in a single magazine. The mass function of the

  4. Energy Magazine. V. 23(3)

    1999-01-01

    The permanent secretariat of OLADE, with financial support of the European Commission, will carry out the National Energetic Information System , through which the tools will be developed for the elaboration and administration of the energy statistics in the member states of the organization. It is also included a vision on the action program in energy for the Caribbean to unify efforts and to coordinate actions leading the energy development and the diversification of the energy supply in order to satisfy their requirements. A section of the magazine, it is dedicated to the transformation experienced by the energy sector in Peru

  5. Magazine exposure, tanned women stereotypes, and tanning attitudes.

    Cho, Hyunyi; Lee, Seungyoon; Wilson, Kari

    2010-09-01

    This study investigated whether magazine exposure is related to stereotypical beliefs about tanned women. A survey of White college women (n=205) assessed their exposure to beauty/fashion and health/fitness magazines. Outcome variables were the beliefs that tanned women are fashionable, fit, and shallow. Attention to the tanned women's images in health magazines positively predicted the belief that tanned women are fit and that tanned women are shallow; in contrast, attention to the images in beauty magazine negatively predicted the belief that tanned women are fit. Number of beauty magazines women read negatively predicted the belief that tanned women are shallow. The belief that tanned women are fit was unrelated, but the belief that tanned women are shallow was negatively related, with tanning attitudes. Copyright © 2010 Elsevier Ltd. All rights reserved.

  6. Just add a pinch of salt!--current directions for the use of salt in recipes in Australian magazines.

    Webster, Jacqui; Dunford, Elizabeth; Barzi, Federica; Neal, Bruce

    2010-02-01

    Australians currently consume too much salt causing adverse consequences for health. The media play an important role in the provision of nutrition advice to consumers. Previous research shows that many foods advertized in consumer magazines are high in salt, but little research has examined magazine recipes in this context. The aim of this project was to summarize directions for salt use in recipes in leading Australian magazines. In August 2007 and 2008, the top 10 magazines by circulation that included at least five recipes, were examined. Standardized information was collected about directions for salt use in recipes. Three hundred and thirty recipes were identified in 2007 and 417 in 2008. About 68% of recipes included high-salt ingredients, 37% instructed to season with salt, 10% instructed to add a specific quantity of salt and 15% recommended selection of low-salt ingredients. There was substantial variability in directions for salt use in recipes between magazines, but no clear differences between 2007 and 2008. Many recipes advised to add salt in direct contradiction to national dietary guidelines. There is clear potential for editorial guidelines on salt use in recipes to play a role in advancing public health efforts in Australia and other such nations.

  7. Variations in food and drink advertising in UK monthly women's magazines according to season, magazine type and socio-economic profile of readers: a descriptive study of publications over 12 months

    White Martin

    2011-05-01

    Full Text Available Abstract Background Overweight and obesity are recognised nationally and internationally as key public health challenges. Food and drink advertising is one of the array of factors that influence both diet and physical activity choices and, hence, body weight and obesity. Little previous work has focused on food and drink advertising in magazines. We studied food and drink advertising in a wide range of popular UK monthly women's magazines published over a full year. We explored differences in the prevalence of food and drink advertising and the type of food and drinks advertised according to season, magazine type and socio-economic profile of readers. Methods All advertisements in all issues of 18 popular UK monthly women's magazines published over 12 months were identified. For each food or drink advertisement, branded food and drinks were noted and categorised into one of seven food groups. All analyses were at the level of the individual advertisement. Results A total of 35 053 advertisements were identified; 1380 (3.9% of these were for food or drink. The most common food group represented was 'food and drinks high in fat and/or sugar' (28.0% of food advertisements, the least common group was 'fruits & vegetables' (2.0% of food advertisements. Advertisements for alcohol accounted for 10.1% of all food advertisements. Food and drink advertisements were most common in summer, general interest magazines, and those with the most affluent readerships. There were some differences in the type of food and drink advertised across season, magazine type and socio-economic profile of readers. Conclusions Food and drink advertisements represented only a small proportion of advertisements in UK women's monthly magazines. Food and drink advertisements in these magazines feature a high proportion of 'less healthy' foods. There were a number of differences across season, magazine type and according to the socio-economic profile of readers in the prevalence

  8. An integrated high performance Fastbus slave interface

    Christiansen, J.; Ljuslin, C.

    1993-01-01

    A high performance CMOS Fastbus slave interface ASIC (Application Specific Integrated Circuit) supporting all addressing and data transfer modes defined in the IEEE 960 - 1986 standard is presented. The FAstbus Slave Integrated Circuit (FASIC) is an interface between the asynchronous Fastbus and a clock synchronous processor/memory bus. It can work stand-alone or together with a 32 bit microprocessor. The FASIC is a programmable device enabling its direct use in many different applications. A set of programmable address mapping windows can map Fastbus addresses to convenient memory addresses and at the same time act as address decoding logic. Data rates of 100 MBytes/sec to Fastbus can be obtained using an internal FIFO in the FASIC to buffer data between the two buses during block transfers. Message passing from Fastbus to a microprocessor on the slave module is supported. A compact (70 mm x 170 mm) Fastbus slave piggy back sub-card interface including level conversion between ECL and TTL signal levels has been implemented using surface mount components and the 208 pin FASIC chip

  9. High Performance Graphene Oxide Based Rubber Composites

    Mao, Yingyan; Wen, Shipeng; Chen, Yulong; Zhang, Fazhong; Panine, Pierre; Chan, Tung W.; Zhang, Liqun; Liang, Yongri; Liu, Li

    2013-01-01

    In this paper, graphene oxide/styrene-butadiene rubber (GO/SBR) composites with complete exfoliation of GO sheets were prepared by aqueous-phase mixing of GO colloid with SBR latex and a small loading of butadiene-styrene-vinyl-pyridine rubber (VPR) latex, followed by their co-coagulation. During co-coagulation, VPR not only plays a key role in the prevention of aggregation of GO sheets but also acts as an interface-bridge between GO and SBR. The results demonstrated that the mechanical properties of the GO/SBR composite with 2.0 vol.% GO is comparable with those of the SBR composite reinforced with 13.1 vol.% of carbon black (CB), with a low mass density and a good gas barrier ability to boot. The present work also showed that GO-silica/SBR composite exhibited outstanding wear resistance and low-rolling resistance which make GO-silica/SBR very competitive for the green tire application, opening up enormous opportunities to prepare high performance rubber composites for future engineering applications. PMID:23974435

  10. Initial rheological description of high performance concretes

    Alessandra Lorenzetti de Castro

    2006-12-01

    Full Text Available Concrete is defined as a composite material and, in rheological terms, it can be understood as a concentrated suspension of solid particles (aggregates in a viscous liquid (cement paste. On a macroscopic scale, concrete flows as a liquid. It is known that the rheological behavior of the concrete is close to that of a Bingham fluid and two rheological parameters regarding its description are needed: yield stress and plastic viscosity. The aim of this paper is to present the initial rheological description of high performance concretes using the modified slump test. According to the results, an increase of yield stress was observed over time, while a slight variation in plastic viscosity was noticed. The incorporation of silica fume showed changes in the rheological properties of fresh concrete. The behavior of these materials also varied with the mixing procedure employed in their production. The addition of superplasticizer meant that there was a large reduction in the mixture's yield stress, while plastic viscosity remained practically constant.

  11. High thermoelectric performance of graphite nanofibers.

    Tran, Van-Truong; Saint-Martin, Jérôme; Dollfus, Philippe; Volz, Sebastian

    2018-02-22

    Graphite nanofibers (GNFs) have been demonstrated to be a promising material for hydrogen storage and heat management in electronic devices. Here, by means of first-principles and transport simulations, we show that GNFs can also be an excellent material for thermoelectric applications thanks to the interlayer weak van der Waals interaction that induces low thermal conductance and a step-like shape in the electronic transmission with mini-gaps, which are necessary ingredients to achieve high thermoelectric performance. This study unveils that the platelet form of GNFs in which graphite layers are perpendicular to the fiber axis can exhibit outstanding thermoelectric properties with a figure of merit ZT reaching 3.55 in a 0.5 nm diameter fiber and 1.1 in a 1.1 nm diameter one. Interestingly, by introducing 14 C isotope doping, ZT can even be enhanced up to more than 5, and more than 8 if we include the effect of finite phonon mean free path, which demonstrates the amazing thermoelectric potential of GNFs.

  12. Durability of high performance concrete in seawater

    Amjad Hussain Memon; Salihuddin Radin Sumadi; Rabitah Handan

    2000-01-01

    This paper presents a report on the effects of blended cements on the durability of high performance concrete (HPC) in seawater. In this research the effect of seawater was investigated. The specimens were initially subjected to water curing for seven days inside the laboratory at room temperature, followed by seawater curing exposed to tidal zone until testing. In this study three levels of cement replacement (0%, 30% and 70%) were used. The combined use of chemical and mineral admixtures has resulted in a new generation of concrete called HPC. The HPC has been identified as one of the most important advanced materials necessary in the effort to build a nation's infrastructure. HPC opens new opportunities in the utilization of the industrial by-products (mineral admixtures) in the construction industry. As a matter of fact permeability is considered as one of the fundamental properties governing the durability of concrete in the marine environment. Results of this investigation indicated that the oxygen permeability values for the blended cement concretes at the age of one year are reduced by a factor of about 2 as compared to OPC control mix concrete. Therefore both blended cement concretes are expected to withstand in the seawater exposed to tidal zone without serious deterioration. (Author)

  13. Governing the healthy male citizen: men, masculinity and popular health in Men's Health magazine.

    Crawshaw, Paul

    2007-10-01

    Recent commentators have noted the potential of newer neo-liberal discourses of health care to position responsibility for the management of well-being with the individual. Often promoted through the inculcation of risk avoidance and management, such discourses are played out in myriad settings, including the popular media. Magazines are one such media site in which diverse exhortations for the achievement of health, well-being and the perfectible body are made, and Bunton [1997. Popular health, advanced liberalism and good housekeeping magazine. In A. Petersen & Bunton R. (Eds.) Foucault, health and medicine (pp. 223-247). London: Routledge] has identified 'magazine medicine' as a significant manifestation of more dedifferentiated models of health care. Recent discussions have placed men's health high on research and policy agendas, with a concomitant interest in more popular realms. The UK magazine Men's Health (MH) is indicative of these trends, and represents a site at which discourses of men, health and masculinity are constructed. Typically reflecting neo-liberal models of health, here men are constructed as active and entrepreneurial citizens able to maintain their own health and well-being through the judicious management of risk in contexts appropriate to dominant discourses of hegemonic masculinity. Data which resulted from a critical discourse analysis of a 2-year sample (21 issues) of MH are considered and findings related to medicalisation, individualisation and risk discussed. It is suggested that magazine texts such as MH reflect newer individualised models of health care and neo-liberal strategies of health governance premised upon constructing a healthy male citizen, willing and able to take responsibility for their own well-being.

  14. Alternative High-Performance Ceramic Waste Forms

    Sundaram, S. K. [Alfred Univ., NY (United States)

    2017-02-01

    This final report (M5NU-12-NY-AU # 0202-0410) summarizes the results of the project titled “Alternative High-Performance Ceramic Waste Forms,” funded in FY12 by the Nuclear Energy University Program (NEUP Project # 12-3809) being led by Alfred University in collaboration with Savannah River National Laboratory (SRNL). The overall focus of the project is to advance fundamental understanding of crystalline ceramic waste forms and to demonstrate their viability as alternative waste forms to borosilicate glasses. We processed single- and multiphase hollandite waste forms based on simulated waste streams compositions provided by SRNL based on the advanced fuel cycle initiative (AFCI) aqueous separation process developed in the Fuel Cycle Research and Development (FCR&D). For multiphase simulated waste forms, oxide and carbonate precursors were mixed together via ball milling with deionized water using zirconia media in a polyethylene jar for 2 h. The slurry was dried overnight and then separated from the media. The blended powders were then subjected to melting or spark plasma sintering (SPS) processes. Microstructural evolution and phase assemblages of these samples were studied using x-ray diffraction (XRD), scanning electron microscopy (SEM), energy dispersion analysis of x-rays (EDAX), wavelength dispersive spectrometry (WDS), transmission electron spectroscopy (TEM), selective area x-ray diffraction (SAXD), and electron backscatter diffraction (EBSD). These results showed that the processing methods have significant effect on the microstructure and thus the performance of these waste forms. The Ce substitution into zirconolite and pyrochlore materials was investigated using a combination of experimental (in situ XRD and x-ray absorption near edge structure (XANES)) and modeling techniques to study these single phases independently. In zirconolite materials, a transition from the 2M to the 4M polymorph was observed with increasing Ce content. The resulting

  15. Intelligent Facades for High Performance Green Buildings

    Dyson, Anna [Rensselaer Polytechnic Inst., Troy, NY (United States)

    2017-03-01

    Progress Towards Net-Zero and Net-Positive-Energy Commercial Buildings and Urban Districts Through Intelligent Building Envelope Strategies Previous research and development of intelligent facades systems has been limited in their contribution towards national goals for achieving on-site net zero buildings, because this R&D has failed to couple the many qualitative requirements of building envelopes such as the provision of daylighting, access to exterior views, satisfying aesthetic and cultural characteristics, with the quantitative metrics of energy harvesting, storage and redistribution. To achieve energy self-sufficiency from on-site solar resources, building envelopes can and must address this gamut of concerns simultaneously. With this project, we have undertaken a high-performance building integrated combined-heat and power concentrating photovoltaic system with high temperature thermal capture, storage and transport towards multiple applications (BICPV/T). The critical contribution we are offering with the Integrated Concentrating Solar Façade (ICSF) is conceived to improve daylighting quality for improved health of occupants and mitigate solar heat gain while maximally capturing and transferring onsite solar energy. The ICSF accomplishes this multi-functionality by intercepting only the direct-normal component of solar energy (which is responsible for elevated cooling loads) thereby transforming a previously problematic source of energy into a high quality resource that can be applied to building demands such as heating, cooling, dehumidification, domestic hot water, and possible further augmentation of electrical generation through organic Rankine cycles. With the ICSF technology, our team is addressing the global challenge in transitioning commercial and residential building stock towards on-site clean energy self-sufficiency, by fully integrating innovative environmental control systems strategies within an intelligent and responsively dynamic building

  16. High-performance commercial building systems

    Selkowitz, Stephen

    2003-10-01

    This report summarizes key technical accomplishments resulting from the three year PIER-funded R&D program, ''High Performance Commercial Building Systems'' (HPCBS). The program targets the commercial building sector in California, an end-use sector that accounts for about one-third of all California electricity consumption and an even larger fraction of peak demand, at a cost of over $10B/year. Commercial buildings also have a major impact on occupant health, comfort and productivity. Building design and operations practices that influence energy use are deeply engrained in a fragmented, risk-averse industry that is slow to change. Although California's aggressive standards efforts have resulted in new buildings designed to use less energy than those constructed 20 years ago, the actual savings realized are still well below technical and economic potentials. The broad goal of this program is to develop and deploy a set of energy-saving technologies, strategies, and techniques, and improve processes for designing, commissioning, and operating commercial buildings, while improving health, comfort, and performance of occupants, all in a manner consistent with sound economic investment practices. Results are to be broadly applicable to the commercial sector for different building sizes and types, e.g. offices and schools, for different classes of ownership, both public and private, and for owner-occupied as well as speculative buildings. The program aims to facilitate significant electricity use savings in the California commercial sector by 2015, while assuring that these savings are affordable and promote high quality indoor environments. The five linked technical program elements contain 14 projects with 41 distinct R&D tasks. Collectively they form a comprehensive Research, Development, and Demonstration (RD&D) program with the potential to capture large savings in the commercial building sector, providing significant economic benefits to

  17. Improving the high performance concrete (HPC behaviour in high temperatures

    Cattelan Antocheves De Lima, R.

    2003-12-01

    Full Text Available High performance concrete (HPC is an interesting material that has been long attracting the interest from the scientific and technical community, due to the clear advantages obtained in terms of mechanical strength and durability. Given these better characteristics, HFC, in its various forms, has been gradually replacing normal strength concrete, especially in structures exposed to severe environments. However, the veiy dense microstructure and low permeability typical of HPC can result in explosive spalling under certain thermal and mechanical conditions, such as when concrete is subject to rapid temperature rises, during a f¡re. This behaviour is caused by the build-up of internal water pressure, in the pore structure, during heating, and by stresses originating from thermal deformation gradients. Although there are still a limited number of experimental programs in this area, some researchers have reported that the addition of polypropylene fibers to HPC is a suitable way to avoid explosive spalling under f re conditions. This change in behavior is derived from the fact that polypropylene fibers melt in high temperatures and leave a pathway for heated gas to escape the concrete matrix, therefore allowing the outward migration of water vapor and resulting in the reduction of interned pore pressure. The present research investigates the behavior of high performance concrete on high temperatures, especially when polypropylene fibers are added to the mix.

    El hormigón de alta resistencia (HAR es un material de gran interés para la comunidad científica y técnica, debido a las claras ventajas obtenidas en término de resistencia mecánica y durabilidad. A causa de estas características, el HAR, en sus diversas formas, en algunas aplicaciones está reemplazando gradualmente al hormigón de resistencia normal, especialmente en estructuras expuestas a ambientes severos. Sin embargo, la microestructura muy densa y la baja permeabilidad t

  18. Spectrally high performing quantum cascade lasers

    Toor, Fatima

    Quantum cascade (QC) lasers are versatile semiconductor light sources that can be engineered to emit light of almost any wavelength in the mid- to far-infrared (IR) and terahertz region from 3 to 300 mum [1-5]. Furthermore QC laser technology in the mid-IR range has great potential for applications in environmental, medical and industrial trace gas sensing [6-10] since several chemical vapors have strong rovibrational frequencies in this range and are uniquely identifiable by their absorption spectra through optical probing of absorption and transmission. Therefore, having a wide range of mid-IR wavelengths in a single QC laser source would greatly increase the specificity of QC laser-based spectroscopic systems, and also make them more compact and field deployable. This thesis presents work on several different approaches to multi-wavelength QC laser sources that take advantage of band-structure engineering and the uni-polar nature of QC lasers. Also, since for chemical sensing, lasers with narrow linewidth are needed, work is presented on a single mode distributed feedback (DFB) QC laser. First, a compact four-wavelength QC laser source, which is based on a 2-by-2 module design, with two waveguides having QC laser stacks for two different emission wavelengths each, one with 7.0 mum/11.2 mum, and the other with 8.7 mum/12.0 mum is presented. This is the first design of a four-wavelength QC laser source with widely different emission wavelengths that uses minimal optics and electronics. Second, since there are still several unknown factors that affect QC laser performance, results on a first ever study conducted to determine the effects of waveguide side-wall roughness on QC laser performance using the two-wavelength waveguides is presented. The results are consistent with Rayleigh scattering effects in the waveguides, with roughness effecting shorter wavelengths more than longer wavelengths. Third, a versatile time-multiplexed multi-wavelength QC laser system that

  19. Food references and marketing in popular magazines for children and adolescents in New Zealand: a content analysis.

    No, Elizabeth; Kelly, Bridget; Devi, Anandita; Swinburn, Boyd; Vandevijvere, Stefanie

    2014-12-01

    Food marketing is recognized as an important factor influencing children's food preferences and consumption. The purpose of this study was to examine the nature and extent of unhealthy food marketing and non-branded food references in magazines targeted at and popular among children and adolescents 10-17 years old in New Zealand. A content analysis was conducted of all food references (branded and non-branded) found in the five magazines with the highest readership among 10-17 year olds, and the three magazines (of which two were already included among the five most popular magazines) targeted to 10-17 year olds. For each of the six magazines, one issue per month (n = 72 issues in total) over a one-year period (December 2012-January 2014) was included. All foods referenced were classified into healthy/unhealthy according to the food-based Ministry of Health classification system. Branded food references (30% of total) were more frequent for unhealthy (43%) compared to healthy (25%) foods. Magazines specifically targeted to children and adolescents contained a significantly higher proportion of unhealthy branded food references (n = 51/71, 72%) compared to the most popular magazines among children and adolescents (n = 133/317, 42%), of which most were targeted to women. 'Snack items' such as chocolates and ice creams were marketed most frequently (n = 104; 36%), while 'vegetables and fruits' were marketed the least frequently (n = 9; 3%). Direct advertisements accounted for 27% of branded food references and 25% of those featured health or nutrition claims. Both branded and non-branded food references were common within magazines targeted at and popular among children and adolescents, and skewed toward unhealthy foods. This raises concerns about the effectiveness of self-regulation in marketing and emphasizes that government regulations are needed in order to curb children's current potential high exposures to unhealthy food marketing. In

  20. Nova performance at ultra high fluence levels

    Hunt, J.T.

    1986-01-01

    Nova is a ten beam high power Nd:glass laser used for interial confinement fusion research. It was operated in the high power high energy regime following the completion of construction in December 1984. During this period several interesting nonlinear optical phenomena were observed. These phenomena are discussed in the text. 11 refs., 5 figs

  1. Durability and Performance of High Performance Infiltration Cathodes

    Samson, Alfred Junio; Søgaard, Martin; Hjalmarsson, Per

    2013-01-01

    The performance and durability of solid oxide fuel cell (SOFC) cathodes consisting of a porous Ce0.9Gd0.1O1.95 (CGO) infiltrated with nitrates corresponding to the nominal compositions La0.6Sr0.4Co1.05O3-δ (LSC), LaCoO3-δ (LC), and Co3O4 are discussed. At 600°C, the polarization resistance, Rp......, varied as: LSC (0.062Ωcm2)cathode was found to depend on the infiltrate firing temperature and is suggested to originate...... of the infiltrate but also from a better surface exchange property. A 450h test of an LSC-infiltrated CGO cathode showed an Rp with final degradation rate of only 11mΩcm2kh-1. An SOFC with an LSC-infiltrated CGO cathode tested for 1,500h at 700°C and 0.5Acm-2 (60% fuel, 20% air utilization) revealed no measurable...

  2. High Performance Computing in Science and Engineering '02 : Transactions of the High Performance Computing Center

    Jäger, Willi

    2003-01-01

    This book presents the state-of-the-art in modeling and simulation on supercomputers. Leading German research groups present their results achieved on high-end systems of the High Performance Computing Center Stuttgart (HLRS) for the year 2002. Reports cover all fields of supercomputing simulation ranging from computational fluid dynamics to computer science. Special emphasis is given to industrially relevant applications. Moreover, by presenting results for both vector sytems and micro-processor based systems the book allows to compare performance levels and usability of a variety of supercomputer architectures. It therefore becomes an indispensable guidebook to assess the impact of the Japanese Earth Simulator project on supercomputing in the years to come.

  3. From adaptive to high-performance structures

    Teuffel, P.

    2011-01-01

    Multiple design aspects influence the building performance such as architectural criteria, various environmental impacts and user behaviour. Specific examples are sun, wind, temperatures, function, occupancy, socio-cultural aspects and other contextual aspects and needs. Even though these aspects

  4. High-performance-vehicle technology. [fighter aircraft propulsion

    Povinelli, L. A.

    1979-01-01

    Propulsion needs of high performance military aircraft are discussed. Inlet performance, nozzle performance and cooling, and afterburner performance are covered. It is concluded that nonaxisymmetric nozzles provide cleaner external lines and enhanced maneuverability, but the internal flows are more complex. Swirl afterburners show promise for enhanced performance in the high altitude, low Mach number region.

  5. "Tobacco Truths": Health Magazine, Clinical Epidemiology, and the Cigarette Connection.

    Wilmshurst, Sara

    2015-01-01

    In the 1950s, Health, a magazine published by the Health League of Canada, was nonchalant about the risks of smoking and largely ignored early epidemiological studies of lung cancer. In the 1960s the magazine stopped accepting cigarette advertising and began to oppose smoking. Health's writers adjusted to new knowledge; the magazine gradually accepted clinical epidemiology as a source of medical knowledge and recognized smoking as a public health risk. As Canada's only devoted health publication for a lay audience at the time, Health provides a unique window into ways that smoking and health were portrayed to its readers.

  6. Magazine Publishing Innovation: Two Case Studies on Managing Creativity

    Simon Das

    2016-06-01

    Full Text Available This paper aims to highlight a link between publishing business innovation and how editors manage creativity in the digital era. Examining the changing industrial and historical business context for the U.K. magazine publishing industry, two case studies are analyzed as representatives of different ends of the publishing company spectrum (one a newly launched magazine published by a major, the other an independent ‘magazine’ website start-up. Qualitative data analysis on publishing innovation and managing creativity is presented as a springboard for further research on magazine media management.

  7. RISC Processors and High Performance Computing

    Bailey, David H.; Saini, Subhash; Craw, James M. (Technical Monitor)

    1995-01-01

    This tutorial will discuss the top five RISC microprocessors and the parallel systems in which they are used. It will provide a unique cross-machine comparison not available elsewhere. The effective performance of these processors will be compared by citing standard benchmarks in the context of real applications. The latest NAS Parallel Benchmarks, both absolute performance and performance per dollar, will be listed. The next generation of the NPB will be described. The tutorial will conclude with a discussion of future directions in the field. Technology Transfer Considerations: All of these computer systems are commercially available internationally. Information about these processors is available in the public domain, mostly from the vendors themselves. The NAS Parallel Benchmarks and their results have been previously approved numerous times for public release, beginning back in 1991.

  8. A high performance thermoacoustic Stirling-engine

    Tijani, M.E.H.; Spoelstra, S. [Energy research Centre of the Netherlands (ECN), PO Box 1, 1755 ZG Petten (Netherlands)

    2011-11-10

    In thermoacoustic systems heat is converted into acoustic energy and vice versa. These systems use inert gases as working medium and have no moving parts which makes the thermoacoustic technology a serious alternative to produce mechanical or electrical power, cooling power, and heating in a sustainable and environmentally friendly way. A thermoacoustic Stirling heat engine is designed and built which achieves a record performance of 49% of the Carnot efficiency. The design and performance of the engine is presented. The engine has no moving parts and is made up of few simple components.

  9. Psychological factors in developing high performance athletes

    Elbe, Anne-Marie; Wikman, Johan Michael

    2017-01-01

    calls for great efforts in dealing with competitive pressure and demands mental strength with regard to endurance, self-motivation and willpower. But while it is somewhat straightforward to specify the physical and physiological skills needed for top performance in a specific sport, it becomes less...... clear with regard to the psychological skills that are needed. Therefore, the main questions to be addressed in this chapter are: (1) which psychological skills are needed to reach top performance? And (2) (how) can these skills be developed in young talents?...

  10. High Performance Expectations: Concept and causes

    Andersen, Lotte Bøgh; Jacobsen, Christian Bøtcher

    2017-01-01

    literature research, HPE is defined as the degree to which leaders succeed in expressing ambitious expectations to their employees’ achievement of given performance criteria, and it is analyzed how leadership behavior affects employee-perceived HPE. This study applies a large-scale leadership field...... experiment with 3,730 employees nested in 471 organizations and finds that transformational leadership training as well as transactional and combined training of the leaders significantly increased employees’ HPE relative to a control group. Furthermore, transformational leadership and the use of pecuniary...... rewards seem to be important mechanisms. This implies that public leaders can actually affect HPE through their leadership and thus potentially organizational performance as well....

  11. High Rate Performing Li-ion Battery

    2015-02-09

    journal article will be sufficient in most cases. This document may be as long or as short as needed to give a fair account of the work performed...Klink, J. J. & Moser, J. EPR Study of Vanadium (4+) in the Anatase and Rutile Phases of TiO2. Phys. Rev. B 34, 3060-3068 (1986). 40 Abragam, A

  12. Engendering a high performing organisational culture through ...

    Concluding that Africa's poor organisational performances are attributable to some inadequacies in the cultural foundations of countries and organisations, this paper argues for internal branding as the way forward for African organisations. Through internal branding an African organization can use a systematic and ...

  13. Mastering JavaScript high performance

    Adams, Chad R

    2015-01-01

    If you are a JavaScript developer with some experience in development and want to increase the performance of JavaScript projects by building faster web apps, then this book is for you. You should know the basic concepts of JavaScript.

  14. Gamma and Xray spectroscopy at high performance

    Borchert, G.L.

    1984-01-01

    The author determines that for many interesting problems in gamma and Xray spectroscopy it is necessary to use crystal diffractometers. The basic features of such instruments are discussed and the special performance of crystal spectrometers is demonstrated by means of typical examples of various applications

  15. How do men's magazines talk about penises?

    Owen, Craig; Campbell, Christine

    2018-02-01

    Constructions of masculinity have shifted and changed but the central role of the penis has remained firm. Yet, despite the implications for sexual health, there has been very little research on discourses around penises. The messages men receive about their manhood is apparent in articles in men's magazines. We conducted a discursive analysis of the ways in which penises were discussed in four market leading UK titles: Loaded, Men's Health, GQ and Attitude. Two broad discourses were identified, termed Laddish and Medicalised, both of which create fear-ridden spaces where men are bombarded with unachievable masculine ideals and traumatic examples of mutilated members. We discuss how health psychologists could use the findings to communicate with men about their sexual health needs using this channel.

  16. An analysis of obituaries in staff magazines.

    Heynderickx, Priscilla C; Dieltjens, Sylvain M

    2016-01-01

    In the literature, extensive attention is given to the content, structure, and style of obituaries in newspapers. Analyses of the demise of colleagues in internal business communications are however nonexistent. This article discusses a bottom-up analysis of 150 obituaries published in Flemish staff magazines--obituaries that mostly focus on the deceased's career and professional qualities. Following analysis, the data were divided in obituaries that are continuous texts and obituaries with a letter format. The differences between the two types lie at different levels: format, content, structure, and language use. Obituaries with a letter format are characterized and determined by three paradoxes: the sender-receiver paradox, life-death paradox, and happiness-sadness paradox.

  17. High Performance Fortran for Aerospace Applications

    Mehrotra, Piyush

    2000-01-01

    .... HPF is a set of Fortran extensions designed to provide users with a high-level interface for programming data parallel scientific applications while delegating to the compiler/runtime system the task...

  18. High-Performance Computing Paradigm and Infrastructure

    Yang, Laurence T

    2006-01-01

    With hyperthreading in Intel processors, hypertransport links in next generation AMD processors, multi-core silicon in today's high-end microprocessors from IBM and emerging grid computing, parallel and distributed computers have moved into the mainstream

  19. High performance management bij franchise-supermarkten

    Sloot, Laurens; van Nierop, Erjen; de Waal, Andre

    In dit artikel wordt een onderzoek gepresenteerd naar de mate waarin franchise-supermarkten voldoen aan de vijf factoren van high performanceorganisaties (HPO): hoge kwaliteit managers, hoge kwaliteit medewerkers, openheid en actiegerichtheid, continue verbetering en vernieuwing, en

  20. High performance fuel technology development : Development of high performance cladding materials

    Park, Jeongyong; Jeong, Y. H.; Park, S. Y.

    2012-04-01

    The superior in-pile performance of the HANA claddings have been verified by the successful irradiation test and in the Halden research reactor up to the high burn-up of 67GWD/MTU. The in-pile corrosion and creep resistances of HANA claddings were improved by 40% and 50%, respectively, over Zircaloy-4. HANA claddings have been also irradiated in the commercial reactor up to 2 reactor cycles, showing the corrosion resistance 40% better than that of ZIRLO in the same fuel assembly. Long-term out-of-pile performance tests for the candidates of the next generation cladding materials have produced the highly reliable test results. The final candidate alloys were selected and they showed the corrosion resistance 50% better than the foreign advanced claddings, which is beyond the original target. The LOCA-related properties were also improved by 20% over the foreign advanced claddings. In order to establish the optimal manufacturing process for the inner and outer claddings of the dual-cooled fuel, 18 different kinds of specimens were fabricated with various cold working and annealing conditions. Based on the performance tests and various out-of-pile test results obtained from the specimens, the optimal manufacturing process was established for the inner and outer cladding tubes of the dual-cooled fuel

  1. Menhir: An Environment for High Performance Matlab

    Stéphane Chauveau

    1999-01-01

    Full Text Available In this paper we present Menhir a compiler for generating sequential or parallel code from the Matlab language. The compiler has been designed in the context of using Matlab as a specification language. One of the major features of Menhir is its retargetability to generate parallel and sequential C or Fortran code. We present the compilation process and the target system description for Menhir. Preliminary performances are given and compared with MCC, the MathWorks Matlab compiler.

  2. Inclusion control in high-performance steels

    Holappa, L.E.K.; Helle, A.S.

    1995-01-01

    Progress of clean steel production, fundamentals of oxide and sulphide inclusions as well as inclusion morphology in normal and calcium treated steels are described. Effects of cleanliness and inclusion control on steel properties are discussed. In many damaging constructional and engineering applications the nonmetallic inclusions have a quite decisive role in steel performance. An example of combination of good mechanical properties and superior machinability by applying inclusion control is presented. (author)

  3. Emerging technologies for high performance infrared detectors

    Tan Chee Leong; Mohseni Hooman

    2018-01-01

    Infrared photodetectors (IRPDs) have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III–V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as...

  4. Review of David Abrahamson and Marcia R. Prior-Miller (eds, The Routledge Handbook of Magazine Research: The Future of the Magazine Form (2015

    Maaike Koffeman

    2016-07-01

    Full Text Available David Abrahamson and Marcia R. Prior-Miller (eds, The Routledge Handbook of Magazine Research: The Future of the Magazine Form (New York: Routledge, 2015. 650 pp. ISBN 978-1138854161.

  5. Development of a high performance liquid chromatography method ...

    Development of a high performance liquid chromatography method for simultaneous ... Purpose: To develop and validate a new low-cost high performance liquid chromatography (HPLC) method for ..... Several papers have reported the use of ...

  6. High Performance Home Building Guide for Habitat for Humanity Affiliates

    Lindsey Marburger

    2010-10-01

    This guide covers basic principles of high performance Habitat construction, steps to achieving high performance Habitat construction, resources to help improve building practices, materials, etc., and affiliate profiles and recommendations.

  7. High Performance Computing in Science and Engineering '99 : Transactions of the High Performance Computing Center

    Jäger, Willi

    2000-01-01

    The book contains reports about the most significant projects from science and engineering of the Federal High Performance Computing Center Stuttgart (HLRS). They were carefully selected in a peer-review process and are showcases of an innovative combination of state-of-the-art modeling, novel algorithms and the use of leading-edge parallel computer technology. The projects of HLRS are using supercomputer systems operated jointly by university and industry and therefore a special emphasis has been put on the industrial relevance of results and methods.

  8. High Performance Computing in Science and Engineering '98 : Transactions of the High Performance Computing Center

    Jäger, Willi

    1999-01-01

    The book contains reports about the most significant projects from science and industry that are using the supercomputers of the Federal High Performance Computing Center Stuttgart (HLRS). These projects are from different scientific disciplines, with a focus on engineering, physics and chemistry. They were carefully selected in a peer-review process and are showcases for an innovative combination of state-of-the-art physical modeling, novel algorithms and the use of leading-edge parallel computer technology. As HLRS is in close cooperation with industrial companies, special emphasis has been put on the industrial relevance of results and methods.

  9. Development of High Performance Piezoelectric Polyimides

    Simpson, Joycelyn O.; St.Clair, Terry L.; Welch, Sharon S.

    1996-01-01

    In this work a series of polyimides are investigated which exhibit a strong piezoelectric response and polarization stability at temperatures in excess of 100 C. This work was motivated by the need to develop piezoelectric sensors suitable for use in high temperature aerospace applications.

  10. Powder metallurgical high performance materials. Proceedings. Volume 1: high performance P/M metals

    Kneringer, G.; Roedhammer, P.; Wildner, H.

    2001-01-01

    The proceedings of this sequence of seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15th Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

  11. Powder metallurgical high performance materials. Proceedings. Volume 1: high performance P/M metals

    Kneringer, G; Roedhammer, P; Wildner, H [eds.

    2001-07-01

    The proceedings of this sequence of seminars form an impressive chronicle of the continued progress in the understanding of refractory metals and cemented carbides and in their manufacture and application. There the ingenuity and assiduous work of thousands of scientists and engineers striving for progress in the field of powder metallurgy is documented in more than 2000 contributions covering some 30000 pages. The 15th Plansee Seminar was convened under the general theme 'Powder Metallurgical High Performance Materials'. Under this broadened perspective the seminar will strive to look beyond the refractory metals and cemented carbides, which remain at its focus, to novel classes of materials, such as intermetallic compounds, with potential for high temperature applications. (author)

  12. High performance flexible electronics for biomedical devices.

    Salvatore, Giovanni A; Munzenrieder, Niko; Zysset, Christoph; Kinkeldei, Thomas; Petti, Luisa; Troster, Gerhard

    2014-01-01

    Plastic electronics is soft, deformable and lightweight and it is suitable for the realization of devices which can form an intimate interface with the body, be implanted or integrated into textile for wearable and biomedical applications. Here, we present flexible electronics based on amorphous oxide semiconductors (a-IGZO) whose performance can achieve MHz frequency even when bent around hair. We developed an assembly technique to integrate complex electronic functionalities into textile while preserving the softness of the garment. All this and further developments can open up new opportunities in health monitoring, biotechnology and telemedicine.

  13. High performance image processing of SPRINT

    DeGroot, T. [Lawrence Livermore National Lab., CA (United States)

    1994-11-15

    This talk will describe computed tomography (CT) reconstruction using filtered back-projection on SPRINT parallel computers. CT is a computationally intensive task, typically requiring several minutes to reconstruct a 512x512 image. SPRINT and other parallel computers can be applied to CT reconstruction to reduce computation time from minutes to seconds. SPRINT is a family of massively parallel computers developed at LLNL. SPRINT-2.5 is a 128-node multiprocessor whose performance can exceed twice that of a Cray-Y/MP. SPRINT-3 will be 10 times faster. Described will be the parallel algorithms for filtered back-projection and their execution on SPRINT parallel computers.

  14. Miniaturized high performance sensors for space plasmas

    Young, D.T.

    1996-01-01

    Operating under ever more constrained budgets, NASA has turned to a new paradigm for instrumentation and mission development in which smaller, faster, better, cheaper is of primary consideration for future space plasma investigations. The author presents several examples showing the influence of this new paradigm on sensor development and discuss certain implications for the scientific return from resource constrained sensors. The author also discusses one way to improve space plasma sensor performance which is to search out new technologies, measurement techniques and instrument analogs from related fields including among others, laboratory plasma physics

  15. High Performance Building Mockup in FLEXLAB

    McNeil, Andrew [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Kohler, Christian [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Lee, Eleanor S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States); Selkowitz, Stephen [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States)

    2017-08-30

    Genentech has ambitious energy and indoor environmental quality performance goals for Building 35 (B35) being constructed by Webcor at the South San Francisco campus. Genentech and Webcor contracted with the Lawrence Berkeley National Laboratory (LBNL) to test building systems including lighting, lighting controls, shade fabric, and automated shading controls in LBNL’s new FLEXLAB facility. The goal of the testing is to ensure that the systems installed in the new office building will function in a way that reduces energy consumption and provides a comfortable work environment for employees.

  16. High performance computations using dynamical nucleation theory

    Windus, T L; Crosby, L D; Kathmann, S M

    2008-01-01

    Chemists continue to explore the use of very large computations to perform simulations that describe the molecular level physics of critical challenges in science. In this paper, we describe the Dynamical Nucleation Theory Monte Carlo (DNTMC) model - a model for determining molecular scale nucleation rate constants - and its parallel capabilities. The potential for bottlenecks and the challenges to running on future petascale or larger resources are delineated. A 'master-slave' solution is proposed to scale to the petascale and will be developed in the NWChem software. In addition, mathematical and data analysis challenges are described

  17. Pressurized planar electrochromatography, high-performance thin-layer chromatography and high-performance liquid chromatography--comparison of performance.

    Płocharz, Paweł; Klimek-Turek, Anna; Dzido, Tadeusz H

    2010-07-16

    Kinetic performance, measured by plate height, of High-Performance Thin-Layer Chromatography (HPTLC), High-Performance Liquid Chromatography (HPLC) and Pressurized Planar Electrochromatography (PPEC) was compared for the systems with adsorbent of the HPTLC RP18W plate from Merck as the stationary phase and the mobile phase composed of acetonitrile and buffer solution. The HPLC column was packed with the adsorbent, which was scrapped from the chromatographic plate mentioned. An additional HPLC column was also packed with adsorbent of 5 microm particle diameter, C18 type silica based (LiChrosorb RP-18 from Merck). The dependence of plate height of both HPLC and PPEC separating systems on flow velocity of the mobile phase and on migration distance of the mobile phase in TLC system was presented applying test solute (prednisolone succinate). The highest performance, amongst systems investigated, was obtained for the PPEC system. The separation efficiency of the systems investigated in the paper was additionally confirmed by the separation of test component mixture composed of six hormones. 2010 Elsevier B.V. All rights reserved.

  18. Combating HIV/AIDS | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [3.1 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  19. Helping others hear better | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [2.68 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  20. Recovery and Treatment | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [3.1 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  1. Racing Against Lung Cancer | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [3.1 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  2. Exploring Graphic Medicine | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [1.5 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  3. The Opioid Crisis | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [2.68 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  4. The ABCs of GERD | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [2.68 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  5. A Lifelong Asthma Struggle | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [2.68 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  6. NIH on the web | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [3.1 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  7. Hope for Aphasia Patients | NIH MedlinePlus Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [1.9 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  8. Surgery of the Future | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [1.9 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  9. 10 NIH Research Highlights | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [3.1 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  10. Expanding Hearing Healthcare | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [2.68 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  11. NIH on the web | NIH MedlinePlus the Magazine

    Skip to main content NIH MedlinePlus the Magazine NIH MedlinePlus Salud Download the Current Issue PDF [1.5 mb] Trusted Health Information from the National Institutes of Health Home Current Issue ...

  12. The impact of Arizona Highways Magazine's facebook page.

    2014-02-01

    This project examined the relationship between use of the Arizona Highways magazine (AHM) Facebook Page and the decision to : travel to or within Arizona. Key purposes were to: (1) provide a thorough understanding of AHM Facebook Page users, includin...

  13. Treating Cataracts | NIH MedlinePlus the Magazine

    ... Claudine Klose, 63, lives on a farm in New York's Hudson Valley. She had successful cataract surgery in 2013 and shared her experience recently with NIH MedlinePlus magazine. What did you notice about your vision that ...

  14. Loksatta Magazine | Women in Science | Initiatives | Indian Academy ...

    loksatta.com. Loksatta, a leading international Marathi News magazine is providing the abridged translated versions of the essays of Lilavati's Daughters under the Vidynayanmayee series in the Chaturang issue, every saturday. The following ...

  15. Complementary and alternative medicine - representations in popular magazines.

    Dunne, Alexandra; Phillips, Christine

    2010-09-01

    More than half the patients who use complementary and alternative medicine (CAM) in Australia do not discuss it with their doctors. Many consumers use popular media, especially women's magazines, to learn about CAM. To explore representations of CAM in popular Australian women's magazines. Content analysis of three Australian magazines: Australian Women's Weekly, Dolly and New Idea published from January to June 2008. Of 220 references to CAM (4-17 references per issue), most were to biologically based practices, particularly 'functional foods', which enhance health. Most representations of CAM were positive (81.3% positive, 16.4% neutral, 2.3% negative). Explanations of modes of action of CAM tended to be biological but relatively superficial. Australian magazines cast CAM as safe therapy which enhances patient engagement in healthcare, and works in ways analogous to orthodox medical treatments. General practitioners can use discussions with their patients about CAM to encourage health promoting practices.

  16. Can Knowledge of the Characteristics of "High Performers" Be Generalised?

    McKenna, Stephen

    2002-01-01

    Two managers described as high performing constructed complexity maps of their organization/world. The maps suggested that high performance is socially constructed and negotiated in specific contexts and management competencies associated with it are context specific. Development of high performers thus requires personalized coaching more than…

  17. A high performance totally ordered multicast protocol

    Montgomery, Todd; Whetten, Brian; Kaplan, Simon

    1995-01-01

    This paper presents the Reliable Multicast Protocol (RMP). RMP provides a totally ordered, reliable, atomic multicast service on top of an unreliable multicast datagram service such as IP Multicasting. RMP is fully and symmetrically distributed so that no site bears un undue portion of the communication load. RMP provides a wide range of guarantees, from unreliable delivery to totally ordered delivery, to K-resilient, majority resilient, and totally resilient atomic delivery. These QoS guarantees are selectable on a per packet basis. RMP provides many communication options, including virtual synchrony, a publisher/subscriber model of message delivery, an implicit naming service, mutually exclusive handlers for messages, and mutually exclusive locks. It has commonly been held that a large performance penalty must be paid in order to implement total ordering -- RMP discounts this. On SparcStation 10's on a 1250 KB/sec Ethernet, RMP provides totally ordered packet delivery to one destination at 842 KB/sec throughput and with 3.1 ms packet latency. The performance stays roughly constant independent of the number of destinations. For two or more destinations on a LAN, RMP provides higher throughput than any protocol that does not use multicast or broadcast.

  18. High Performance, Three-Dimensional Bilateral Filtering

    Bethel, E. Wes

    2008-01-01

    Image smoothing is a fundamental operation in computer vision and image processing. This work has two main thrusts: (1) implementation of a bilateral filter suitable for use in smoothing, or denoising, 3D volumetric data; (2) implementation of the 3D bilateral filter in three different parallelization models, along with parallel performance studies on two modern HPC architectures. Our bilateral filter formulation is based upon the work of Tomasi [11], but extended to 3D for use on volumetric data. Our three parallel implementations use POSIX threads, the Message Passing Interface (MPI), and Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. Our parallel performance studies, which were conducted on a Cray XT4 supercomputer and aquad-socket, quad-core Opteron workstation, show our algorithm to have near-perfect scalability up to 120 processors. Parallel algorithms, such as the one we present here, will have an increasingly important role for use in production visual analysis systems as the underlying computational platforms transition from single- to multi-core architectures in the future.

  19. High-performance sport, marijuana, and cannabimimetics.

    Hilderbrand, Richard L

    2011-11-01

    The prohibition on use of cannabinoids in sporting competitions has been widely debated and continues to be a contentious issue. Information continues to accumulate on the adverse health effects of smoked marijuana and the decrement of performance caused by the use of cannabinoids. The objective of this article is to provide an overview of cannabinoids and cannabimimetics that directly or indirectly impact sport, the rules of sport, and performance of the athlete. This article reviews some of the history of marijuana in Olympic and Collegiate sport, summarizes the guidelines by which a substance is added to the World Anti-Doping Agency Prohibited List, and updates information on the pharmacologic effects of cannabinoids and their mechanism of action. The recently marketed cannabimimetics Spice and K2 are included in the discussion as they activate the same receptors as are activated by THC. The article also provides a view as to why the World Anti-Doping Agency prohibits cannabinoid or cannabimimetic use incompetition and should continue to do so.

  20. High Performance, Three-Dimensional Bilateral Filtering

    Bethel, E. Wes

    2008-06-05

    Image smoothing is a fundamental operation in computer vision and image processing. This work has two main thrusts: (1) implementation of a bilateral filter suitable for use in smoothing, or denoising, 3D volumetric data; (2) implementation of the 3D bilateral filter in three different parallelization models, along with parallel performance studies on two modern HPC architectures. Our bilateral filter formulation is based upon the work of Tomasi [11], but extended to 3D for use on volumetric data. Our three parallel implementations use POSIX threads, the Message Passing Interface (MPI), and Unified Parallel C (UPC), a Partitioned Global Address Space (PGAS) language. Our parallel performance studies, which were conducted on a Cray XT4 supercomputer and aquad-socket, quad-core Opteron workstation, show our algorithm to have near-perfect scalability up to 120 processors. Parallel algorithms, such as the one we present here, will have an increasingly important role for use in production visual analysis systems as the underlying computational platforms transition from single- to multi-core architectures in the future.

  1. HIGH PERFORMANCE PHOTOGRAMMETRIC PROCESSING ON COMPUTER CLUSTERS

    V. N. Adrov

    2012-07-01

    Full Text Available Most cpu consuming tasks in photogrammetric processing can be done in parallel. The algorithms take independent bits as input and produce independent bits as output. The independence of bits comes from the nature of such algorithms since images, stereopairs or small image blocks parts can be processed independently. Many photogrammetric algorithms are fully automatic and do not require human interference. Photogrammetric workstations can perform tie points measurements, DTM calculations, orthophoto construction, mosaicing and many other service operations in parallel using distributed calculations. Distributed calculations save time reducing several days calculations to several hours calculations. Modern trends in computer technology show the increase of cpu cores in workstations, speed increase in local networks, and as a result dropping the price of the supercomputers or computer clusters that can contain hundreds or even thousands of computing nodes. Common distributed processing in DPW is usually targeted for interactive work with a limited number of cpu cores and is not optimized for centralized administration. The bottleneck of common distributed computing in photogrammetry can be in the limited lan throughput and storage performance, since the processing of huge amounts of large raster images is needed.

  2. Australia's new high performance research reactor

    Miller, R.; Abbate, P.M.

    2003-01-01

    A contract for the design and construction of the Replacement Research Reactor was signed in July 2000 between ANSTO and INVAP from Argentina. Since then the detailed design has been completed, a construction authorization has been obtained, and construction has commenced. The reactor design embodies modern safety thinking together with innovative solutions to ensure a highly safe and reliable plant. Also significant effort has been placed on providing the facility with diverse and ample facilities to maximize its use for irradiating material for radioisotope production as well as providing high neutron fluxes for neutron beam research. The project management organization and planing is commensurate with the complexity of the project and the number of players involved. (author)

  3. High Performance Single Nanowire Tunnel Diodes

    Wallentin, Jesper; Persson, Johan Mikael; Wagner, Jakob Birkedal

    NWs were contacted in a NW-FET setup. Electrical measurements at room temperature display typical tunnel diode behavior, with a Peak-to-Valley Current Ratio (PVCR) as high as 8.2 and a peak current density as high as 329 A/cm2. Low temperature measurements show improved PVCR of up to 27.6....... is the tunnel (Esaki) diode, which provides a low-resistance connection between junctions. We demonstrate an InP-GaAs NW axial heterostructure with tunnel diode behavior. InP and GaAs can be readily n- and p-doped, respectively, and the heterointerface is expected to have an advantageous type II band alignment...

  4. Future Vehicle Technologies : high performance transportation innovations

    Pratt, T. [Future Vehicle Technologies Inc., Maple Ridge, BC (Canada)

    2010-07-01

    Battery management systems (BMS) were discussed in this presentation, with particular reference to the basic BMS design considerations; safety; undisclosed information about BMS; the essence of BMS; and Future Vehicle Technologies' BMS solution. Basic BMS design considerations that were presented included the balancing methodology; prismatic/cylindrical cells; cell protection; accuracy; PCB design, size and components; communications protocol; cost of manufacture; and expandability. In terms of safety, the presentation addressed lithium fires; high voltage; high voltage ground detection; crash/rollover shutdown; complete pack shutdown capability; and heat shields, casings, and impact protection. BMS bus bar engineering considerations were discussed along with good chip design. It was concluded that FVTs advantage is a unique skillset in automotive technology and the development of speed and cost effectiveness. tabs., figs.

  5. Radiation cured coatings for high performance products

    Parkins, J.C.; Teesdale, D.H.

    1984-01-01

    Development over the past ten years of radiation curable coating and lacquer systems and the means of curing them has led to new products in the packaging, flooring, furniture and other industries. Solventless lacquer systems formulated with acrylates and other resins enable high levels of durability, scuff resistance and gloss to be achieved. Ultra violet and electron beam radiation curing are used, the choice depending on the nature of the coating, the product and the scale of the operation. (author)

  6. High thermoelectric performance of graphite nanofibers

    Tran, Van-Truong; Saint-Martin, Jérôme; Dollfus, Philippe; Volz, Sebastian

    2017-01-01

    Graphite nanofibers (GNFs) have been demonstrated to be a promising material for hydrogen storage and heat management in electronic devices. Here, by means of first-principles and transport simulations, we show that GNFs can also be an excellent material for thermoelectric applications thanks to the interlayer weak van der Waals interaction that induces low thermal conductance and a step-like shape in the electronic transmission with mini-gaps, which are necessary ingredients to achieve high ...

  7. New monomers for high performance polymers

    Gratz, Roy F.

    1993-01-01

    This laboratory has been concerned with the development of new polymeric materials with high thermo-oxidative stability for use in the aerospace and electronics industries. Currently, there is special emphasis on developing matrix resins and composites for the high speed civil transport (HSCT) program. This application requires polymers that have service lifetimes of 60,000 hr at 350 F (177 C) and that are readily processible into void-free composites, preferably by melt-flow or powder techniques that avoid the use of high boiling solvents. Recent work has focused on copolymers which have thermally stable imide groups separated by flexible arylene ether linkages, some with trifluoromethyl groups attached to the aromatic rings. The presence of trifluoromethyl groups in monomers and polymers often improves their solubility and processibility. The goal of this research was to synthesize several new monomers containing pendant trifluoromethyl groups and to incorporate these monomers into new imide/arylene ether copolymers. Initially, work was begun on the synthesis of three target compounds. The first two, 3,5-dihydroxybenzo trifluoride and 3-amino 5-hydroxybenzo trifluoride, are intermediates in the synthesis of more complex monomers. The third, 3,5-bis (3-amino-phenoxy) benzotrifluoride, is an interesting diamine that could be incorporated into a polyimide directly.

  8. High performance repairing of reinforced concrete structures

    Iskhakov, I.; Ribakov, Y.; Holschemacher, K.; Mueller, T.

    2013-01-01

    Highlights: ► Steel fibered high strength concrete is effective for repairing concrete elements. ► Changing fibers’ content, required ductility of the repaired element is achieved. ► Experiments prove previously developed design concepts for two layer beams. -- Abstract: Steel fibered high strength concrete (SFHSC) is an effective material that can be used for repairing concrete elements. Design of normal strength concrete (NSC) elements that should be repaired using SFHSC can be based on general concepts for design of two-layer beams, consisting of SFHSC in the compressed zone and NSC without fibers in the tensile zone. It was previously reported that such elements are effective when their section carries rather large bending moments. Steel fibers, added to high strength concrete, increase its ultimate deformations due to the additional energy dissipation potential contributed by fibers. When changing the fibers’ content, a required ductility level of the repaired element can be achieved. Providing proper ductility is important for design of structures to dynamic loadings. The current study discusses experimental results that form a basis for finding optimal fiber content, yielding the highest Poisson coefficient and ductility of the repaired elements’ sections. Some technological issues as well as distribution of fibers in the cross section of two-layer bending elements are investigated. The experimental results, obtained in the frame of this study, form a basis for general technological provisions, related to repairing of NSC beams and slabs, using SFHSC.

  9. Perks of controlled circ: a case study of the distribution practices of Vancouver and Western Living magazines

    Law, Melanie

    2007-01-01

    This report examines controlled-circulation magazines using Vancouver and Western Living magazines as successful examples. It provides an analysis of the workings of controlled circulation with reference to advertising, editorial, branding, and operations, and shows how magazines with this distribution method can be successful despite publishing professionals’ common assumption that controlled-circulation magazines are of lesser quality than paid-circulation magazines.

  10. Portrayal of childhood cancer in English language magazines in North America: 1970-2001.

    Clarke, Juanne

    2005-01-01

    This article is a content and discourse analysis of the portrayal of childhood cancer in English language magazines in North America. In a unique specification of published research on the media portrayal of disease, magazines were divided into three market or audience groupings called (1) science, (2) news/special interest, and (3) other (women/teen/parenting/health). The predominate frames or discoursesin these three groups were compared and differences were found amongst them and discussed in the article. Considerable evidence suggests that people with cancer are stigmatized. In the analyzed media focused on children, those with cancer are highly idealized and stereotyped. On the one hand, this can be thought of as a very positive portrayal of children in this situation. Children are described as if they possess heroic and idealized character traits, appearances, social characteristics, and personalities. Possible links between this idealized, polarized, and biased portrayal of children with cancer and their documented experiences of stigma are discussed.

  11. Magazine Training Trials and Context Effects on Autoshaping

    Oberdieck, Fernando G.

    1982-01-01

    In the autoshaping preparation subjects are exposed to magazine training (US-only trials) prior to the conditioning phase in which a stimulus (conditioned stimulus, CS) predicts the delivery of a response independent reinforcer (unconditioned stimulus, US). Two experiments examined the hypothesis that irrespective of the number of US-only trials administered the magazine training and autoshaping contexts interact to determine conditioning, as measured by contact responses to the CS. The conte...

  12. Information processing among high-performance managers

    S.C. Garcia-Santos

    2010-01-01

    Full Text Available The purpose of this study was to evaluate the information processing of 43 business managers with a professional superior performance. The theoretical framework considers three models: the Theory of Managerial Roles of Henry Mintzberg, the Theory of Information Processing, and Process Model Response to Rorschach by John Exner. The participants have been evaluated by Rorschach method. The results show that these managers are able to collect data, evaluate them and establish rankings properly. At same time, they are capable of being objective and accurate in the problems assessment. This information processing style permits an interpretation of the world around on basis of a very personal and characteristic processing way or cognitive style.

  13. High temperature performance of polymer composites

    Keller, Thomas

    2014-01-01

    The authors explain the changes in the thermophysical and thermomechanical properties of polymer composites under elevated temperatures and fire conditions. Using microscale physical and chemical concepts they allow researchers to find reliable solutions to their engineering needs on the macroscale. In a unique combination of experimental results and quantitative models, a framework is developed to realistically predict the behavior of a variety of polymer composite materials over a wide range of thermal and mechanical loads. In addition, the authors treat extreme fire scenarios up to more than 1000°C for two hours, presenting heat-protection methods to improve the fire resistance of composite materials and full-scale structural members, and discuss their performance after fire exposure. Thanks to the microscopic approach, the developed models are valid for a variety of polymer composites and structural members, making this work applicable to a wide audience, including materials scientists, polymer chemist...

  14. High performance concrete with blended cement

    Biswas, P.P.; Saraswati, S.; Basu, P.C.

    2012-01-01

    Principal objectives of the proposed project are two folds. Firstly, to develop the HPC mix suitable to NPP structures with blended cement, and secondly to study its durability necessary for desired long-term performance. Three grades of concrete to b considered in the proposed projects are M35, M50 and M60 with two types of blended cements, i.e. Portland slag cement (PSC) and Portland pozzolana cement (PPC). Three types of mineral admixtures - silica fume, fly ash and ground granulated blast furnace slag will be used. Concrete mixes with OPc and without any mineral admixture will be considered as reference case. Durability study of these mixes will be carried out

  15. High performance VLSI telemetry data systems

    Chesney, J.; Speciale, N.; Horner, W.; Sabia, S.

    1990-01-01

    NASA's deployment of major space complexes such as Space Station Freedom (SSF) and the Earth Observing System (EOS) will demand increased functionality and performance from ground based telemetry acquisition systems well above current system capabilities. Adaptation of space telemetry data transport and processing standards such as those specified by the Consultative Committee for Space Data Systems (CCSDS) standards and those required for commercial ground distribution of telemetry data, will drive these functional and performance requirements. In addition, budget limitations will force the requirement for higher modularity, flexibility, and interchangeability at lower cost in new ground telemetry data system elements. At NASA's Goddard Space Flight Center (GSFC), the design and development of generic ground telemetry data system elements, over the last five years, has resulted in significant solutions to these problems. This solution, referred to as the functional components approach includes both hardware and software components ready for end user application. The hardware functional components consist of modern data flow architectures utilizing Application Specific Integrated Circuits (ASIC's) developed specifically to support NASA's telemetry data systems needs and designed to meet a range of data rate requirements up to 300 Mbps. Real-time operating system software components support both embedded local software intelligence, and overall system control, status, processing, and interface requirements. These components, hardware and software, form the superstructure upon which project specific elements are added to complete a telemetry ground data system installation. This paper describes the functional components approach, some specific component examples, and a project example of the evolution from VLSI component, to basic board level functional component, to integrated telemetry data system.

  16. High Performance Fuel Technology Development(I)

    Song, Kun Woo; Kim, Keon Sik; Bang, Jeong Yong; Park, Je Keon; Chen, Tae Hyun; Kim, Hyung Kyu

    2010-04-01

    The dual-cooled annular fuel has been investigated for the purpose of achieving the power uprate of 20% and decreasing pellet temperature by 30%. The 12x12 rod array and basic design was developed, which is mechanically compatible with the OPR-1000. The reactor core analysis has been performed using this design, and the results have shown that the criteria of nuclear, thermohydraulic and safety design are satisfied and pellet temperature can be lowered by 40% even in 120% power. The basic design of fuel component was developed and the cladding thickness was designed through analysis and experiments. The solutions have been proposed and analyzed to the technical issues such as 'inner channel blockage' and 'imbalance between inner and outer coolant'. The annular pellet was fabricated with good control of shape and size, and especially, a new sintering technique has been developed to control the deviation of inner diameter within ±5μm. The irradiation test of annular pellets has been conducted up to 10 MWD/kgU to find out the densification and swelling behaviors. The 11 types of materials candidates have developed for the PCI-endurance pellet, and the material containing the Mn-Al additive showed its creep performance of much better than UO2 material. The HANA cladding has been irradiated up to 61 MWD/kgU, and the results have shown that its oxidation resistance is better by 40% than that of Zircaloy. The 30 types of candidate materials for next generation have been developed through alloy design and property tests

  17. Carbon nanotubes for high-performance logic

    Chen, Zhihong; Wong, H.S. Phillip; Mitra, Subhasish; Bol, Aggeth; Peng, Lianmao; Hills, Gage; Thissen, Nick

    2014-01-01

    Single-wall carbon nanotubes (CNTs) were discovered in 1993 and have been an area of intense research since then. They offer the right dimensions to explore material science and physical chemistry at the nanoscale and are the perfect system to study low-dimensional physics and transport. In the past decade, more attention has been shifted toward making use of this unique nanomaterial in real-world applications. In this article, we focus on potential applications of CNTs in the high-performanc...

  18. Friends of the National Library of Medicine, Welcome to NIH MedlinePlus, the magazine | NIH MedlinePlus the Magazine

    ... Contents Dear Readers, WELCOME to NIH MedlinePlus , the magazine. The purpose of NIH MedlinePlus , the magazine, is to provide you with a FREE , trusted ... medical information. Published four times a year, the magazine showcases the National Institutes of Health's (NIH) latest ...

  19. Environmentally friendly, high-performance generation

    Kalmari, A.

    2003-01-01

    The project developer, owner, and operator of the new 45 MWth BFB-based cogeneration plant in Iisalmi is Termia Oy, part of the Atro Group (formerly Savon Voima Oy). Fired on peat and wood waste and handed over to the customer in November 2002, the plant's electrical output is sold to the parent company and heat locally to customers in Iisalmi. When the construction decision was made, one of the main objectives was to utilise as high a level of indigenous fuels (peat and biomass) as possible, at a high level of efficiency. An environmental impact analysis was carried out, taking into account the impact of various fuels and emissions in terms of combustion and logistics. One main benefit of the type of plant ultimately selected was that the bulk of the fuel can be supplied from the surrounding area. This is very important in terms of fuel supply security and local employment. The government provided a EUR 2.7 million grant for the project, equivalent to 13% of the total EUR 21 million investment budget. Before the plant was built, Termia used approximately 95 GWh of indigenous fuels annually. Today, this figure is 220 GWh. The main fuel used is milled peat. Up to 30% green chips from logging residues can be used. Recycled waste fuel can cover up to 3% of the total fuel requirement

  20. Liquid Argon Calorimeter performance at High Rates

    Seifert, F; The ATLAS collaboration

    2013-01-01

    The expected increase of luminosity at HL-LHC by a factor of ten with respect to LHC luminosities has serious consequences for the signal reconstruction, radiation hardness requirements and operations of the ATLAS liquid argon calorimeters in the endcap, respectively forward region. Small modules of each type of calorimeter have been built and exposed to a high intensity proton beam of 50 GeV at IHEP/Protvino. The beam is extracted via the bent crystal technique, offering the unique opportunity to cover intensities ranging from $10^6$ p/s up to $3\\cdot10^{11}$ p/s. This exceeds the deposited energy per time expected at HL-LHC by more than a factor of 100. The correlation between beam intensity and the read-out signal has been studied. The data show clear indications of pulse shape distortion due to the high ionization build-up, in agreement with MC expectations. This is also confirmed from the dependence of the HV currents on beam intensity.

  1. High-performance silicon nanowire bipolar phototransistors

    Tan, Siew Li; Zhao, Xingyan; Chen, Kaixiang; Crozier, Kenneth B.; Dan, Yaping

    2016-07-01

    Silicon nanowires (SiNWs) have emerged as sensitive absorbing materials for photodetection at wavelengths ranging from ultraviolet (UV) to the near infrared. Most of the reports on SiNW photodetectors are based on photoconductor, photodiode, or field-effect transistor device structures. These SiNW devices each have their own advantages and trade-offs in optical gain, response time, operating voltage, and dark current noise. Here, we report on the experimental realization of single SiNW bipolar phototransistors on silicon-on-insulator substrates. Our SiNW devices are based on bipolar transistor structures with an optically injected base region and are fabricated using CMOS-compatible processes. The experimentally measured optoelectronic characteristics of the SiNW phototransistors are in good agreement with simulation results. The SiNW phototransistors exhibit significantly enhanced response to UV and visible light, compared with typical Si p-i-n photodiodes. The near infrared responsivities of the SiNW phototransistors are comparable to those of Si avalanche photodiodes but are achieved at much lower operating voltages. Compared with other reported SiNW photodetectors as well as conventional bulk Si photodiodes and phototransistors, the SiNW phototransistors in this work demonstrate the combined advantages of high gain, high photoresponse, low dark current, and low operating voltage.

  2. The changing marketing of smokeless tobacco in magazine advertisements.

    Curry, Laurel E; Pederson, Linda L; Stryker, Jo Ellen

    2011-07-01

    Concerns about secondhand smoke, increasing indoor smoking bans, and health concerns regarding cigarettes are contributing to the development of new smokeless tobacco (ST) products by the tobacco industry and the repositioning of traditional ST products. The objective of this research was to systematically document the changing advertising strategies and themes of the ST industry. Using descriptive content analysis, this study analyzed 17 nationally circulated magazines for ST advertisements (ads) from 1998-1999 and 2005-2006, recording both magazine and advertisement characteristics (e.g., themes, selling proposition, people portrayed, and setting/surroundings.) Ninety-five unique ads were found during the two time periods-occurring with total frequency of 290 ad placements in 816 issues. One hundred ninety-one ads were found in the 2005-2006 sample, while 99 were found in the 1998-1999 magazines. Significant differences in ST ads were identified between time periods and magazine types. A greater percentage of ads were found in the latter time period, and the average number of ads per issue increased (0.24 in 1998-1999 and 0.49 in 2005-2006, p advertise in men's magazines with themes appealing to men and "traditional" ST users, the ST industry appears to be simultaneously changing its message placement and content in order to include readers of general adult magazines who may not currently use ST.

  3. Tobacco Industry Lifestyle Magazines Targeted to Young Adults

    Cortese, Daniel K.; Lewis, M. Jane; Ling, Pamela M.

    2010-01-01

    Purpose This is the first study describing the tobacco industry’s objectives developing and publishing lifestyle magazines, linking them to tobacco marketing strategies, and how these magazines may encourage smoking. Methods Analysis of previously secret tobacco industry documents and content analysis of 31 lifestyle magazines to understand the motives behind producing these magazines and the role they played in tobacco marketing strategies. Results Philip Morris (PM) debuted Unlimited in 1996 to nearly 2 million readers and RJ Reynolds (RJR) debuted CML in 1999 targeting young adults with their interests. Both magazines were developed as the tobacco companies faced increased advertising restrictions Unlimited contained few images of smoking, but frequently featured elements of the Marlboro brand identity in both advertising and article content. CML featured more smoking imagery and fewer Camel brand identity elements. Conclusions Lifestyle promotions that lack images of smoking may still promote tobacco use through brand imagery. The tobacco industry still uses the “under the radar” strategies used in development of lifestyle magazines in branded websites. Prohibiting lifestyle advertising including print and electronic media that associate tobacco with recreation, action, pleasures, and risky behaviors or that reinforces tobacco brand identity may be an effective strategy to curb young adult smoking. PMID:19699423

  4. Magazines in waiting areas of hospital: a forgotten microbial reservoir?

    Adé, Mathias; Burger, Sandrine; Cuntzmann, Anaelle; Exinger, Julien; Meunier, Olivier

    2017-12-01

    The hospital environment is a potential source of microbial contamination. Thus, the magazines in hospital's waiting rooms are handled by patients and visitors whose health and hygiene conditions can vary widely. In this context, we had measured the microbial load on the surface of magazines. Fifteen magazines from 5 waiting rooms of hospital are sampled by agar prints at the areas taken in hand. The agar plates are incubated at 30̊C for 72h. The colonies are counted and identified by MALDI-TOF mass spectrometry (Vitek ® -MS). The extraction efficiency of bacteria by the agar print method on the magazines is calculated. All the samples highlight a varied bacterial flora: 32CFU/agar in mean. Isolated bacteria come principally from the skin flora (>60%), but we also isolate potentially pathogenic micro-organisme like S. aureus, E. faecalis, A. viridans and Aspergillus sp. as well as oropharyngeal flora bacteria like A. iwolfii and M. osloensis and fecal like B. stercoris. Some species rarely described in hospital are also isolated such as P. yeei or K. sedentarius. The extraction efficiency of the sampling method on a magazine is 36%. Our study, which is the first to be interested in the bacterial contamination of magazines in hospital, could make them consider as microbial reservoir to be controlled, especially for the most fragile patients. New bacterial identification techniques as the MALDI-TOF allow to reveal the presence of rarely described and often underestimated species.

  5. Tobacco industry lifestyle magazines targeted to young adults.

    Cortese, Daniel K; Lewis, M Jane; Ling, Pamela M

    2009-09-01

    This is the first study describing the tobacco industry's objectives developing and publishing lifestyle magazines, linking them to tobacco marketing strategies, and how these magazines may encourage smoking. Analysis of previously secret tobacco industry documents and content analysis of 31 lifestyle magazines to understand the motives behind producing these magazines and the role they played in tobacco marketing strategies. Philip Morris (PM) debuted Unlimited in 1996 to nearly 2 million readers and RJ Reynolds (RJR) debuted CML in 1999, targeting young adults with their interests. Both magazines were developed as the tobacco companies faced increased advertising restrictions. Unlimited contained few images of smoking, but frequently featured elements of the Marlboro brand identity in both advertising and article content. CML featured more smoking imagery and fewer Camel brand identity elements. Lifestyle promotions that lack images of smoking may still promote tobacco use through brand imagery. The tobacco industry still uses the "under-the-radar" strategies used in development of lifestyle magazines in branded Websites. Prohibiting lifestyle advertising including print and electronic media that associate tobacco with recreation, action, pleasures, and risky behaviors or that reinforces tobacco brand identity may be an effective strategy to curb young adult smoking.

  6. High Performance Clocks and Gravity Field Determination

    Müller, J.; Dirkx, D.; Kopeikin, S. M.; Lion, G.; Panet, I.; Petit, G.; Visser, P. N. A. M.

    2018-02-01

    Time measured by an ideal clock crucially depends on the gravitational potential and velocity of the clock according to general relativity. Technological advances in manufacturing high-precision atomic clocks have rapidly improved their accuracy and stability over the last decade that approached the level of 10^{-18}. This notable achievement along with the direct sensitivity of clocks to the strength of the gravitational field make them practically important for various geodetic applications that are addressed in the present paper. Based on a fully relativistic description of the background gravitational physics, we discuss the impact of those highly-precise clocks on the realization of reference frames and time scales used in geodesy. We discuss the current definitions of basic geodetic concepts and come to the conclusion that the advances in clocks and other metrological technologies will soon require the re-definition of time scales or, at least, clarification to ensure their continuity and consistent use in practice. The relative frequency shift between two clocks is directly related to the difference in the values of the gravity potential at the points of clock's localization. According to general relativity the relative accuracy of clocks in 10^{-18} is equivalent to measuring the gravitational red shift effect between two clocks with the height difference amounting to 1 cm. This makes the clocks an indispensable tool in high-precision geodesy in addition to laser ranging and space geodetic techniques. We show how clock measurements can provide geopotential numbers for the realization of gravity-field-related height systems and can resolve discrepancies in classically-determined height systems as well as between national height systems. Another application of clocks is the direct use of observed potential differences for the improved recovery of regional gravity field solutions. Finally, clock measurements for space-borne gravimetry are analyzed along with

  7. Development of high performance hybrid rocket fuels

    Zaseck, Christopher R.

    . In order to examine paraffin/additive combustion in a motor environment, I conducted experiments on well characterized aluminum based additives. In particular, I investigate the influence of aluminum, unpassivated aluminum, milled aluminum/polytetrafluoroethylene (PTFE), and aluminum hydride on the performance of paraffin fuels for hybrid rocket propulsion. I use an optically accessible combustor to examine the performance of the fuel mixtures in terms of characteristic velocity efficiency and regression rate. Each combustor test consumes a 12.7 cm long, 1.9 cm diameter fuel strand under 160 kg/m 2s of oxygen at up to 1.4 MPa. The experimental results indicate that the addition of 5 wt.% 30 mum or 80 nm aluminum to paraffin increases the regression rate by approximately 15% compared to neat paraffin grains. At higher aluminum concentrations and nano-scale particles sizes, the increased melt layer viscosity causes slower regression. Alane and Al/PTFE at 12.5 wt.% increase the regression of paraffin by 21% and 32% respectively. Finally, an aging study indicates that paraffin can protect air and moisture sensitive particles from oxidation. The opposed burner and aluminum/paraffin hybrid rocket experiments show that additives can alter bulk fuel properties, such as viscosity, that regulate entrainment. The general effect of melt layer properties on the entrainment and regression rate of paraffin is not well understood. Improved understanding of how solid additives affect the properties and regression of paraffin is essential to maximize performance. In this document I investigate the effect of melt layer properties on paraffin regression using inert additives. Tests are performed in the optical cylindrical combustor at ˜1 MPa under a gaseous oxygen mass flux of ˜160 kg/m2s. The experiments indicate that the regression rate is proportional to mu0.08rho 0.38kappa0.82. In addition, I explore how to predict fuel viscosity, thermal conductivity, and density prior to testing

  8. Emerging technologies for high performance infrared detectors

    Tan, Chee Leong; Mohseni, Hooman

    2018-01-01

    Infrared photodetectors (IRPDs) have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III-V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as lowering the fabrication cost, simplifying the fabrication processes, increasing the production yield, and increasing the operating temperature by making use of advances in nanofabrication and nanotechnology. We will first review the nanomaterial with suitable electronic and mechanical properties, such as two-dimensional material, graphene, transition metal dichalcogenides, and metal oxides. We compare these with more traditional low-dimensional material such as quantum well, quantum dot, quantum dot in well, semiconductor superlattice, nanowires, nanotube, and colloid quantum dot. We will also review the nanostructures used for enhanced light-matter interaction to boost the IRPD sensitivity. These include nanostructured antireflection coatings, optical antennas, plasmonic, and metamaterials.

  9. Emerging technologies for high performance infrared detectors

    Tan Chee Leong

    2018-01-01

    Full Text Available Infrared photodetectors (IRPDs have become important devices in various applications such as night vision, military missile tracking, medical imaging, industry defect imaging, environmental sensing, and exoplanet exploration. Mature semiconductor technologies such as mercury cadmium telluride and III–V material-based photodetectors have been dominating the industry. However, in the last few decades, significant funding and research has been focused to improve the performance of IRPDs such as lowering the fabrication cost, simplifying the fabrication processes, increasing the production yield, and increasing the operating temperature by making use of advances in nanofabrication and nanotechnology. We will first review the nanomaterial with suitable electronic and mechanical properties, such as two-dimensional material, graphene, transition metal dichalcogenides, and metal oxides. We compare these with more traditional low-dimensional material such as quantum well, quantum dot, quantum dot in well, semiconductor superlattice, nanowires, nanotube, and colloid quantum dot. We will also review the nanostructures used for enhanced light-matter interaction to boost the IRPD sensitivity. These include nanostructured antireflection coatings, optical antennas, plasmonic, and metamaterials.

  10. Video performance for high security applications

    Connell, Jack C.; Norman, Bradley C.

    2010-01-01

    The complexity of physical protection systems has increased to address modern threats to national security and emerging commercial technologies. A key element of modern physical protection systems is the data presented to the human operator used for rapid determination of the cause of an alarm, whether false (e.g., caused by an animal, debris, etc.) or real (e.g., a human adversary). Alarm assessment, the human validation of a sensor alarm, primarily relies on imaging technologies and video systems. Developing measures of effectiveness (MOE) that drive the design or evaluation of a video system or technology becomes a challenge, given the subjectivity of the application (e.g., alarm assessment). Sandia National Laboratories has conducted empirical analysis using field test data and mathematical models such as binomial distribution and Johnson target transfer functions to develop MOEs for video system technologies. Depending on the technology, the task of the security operator and the distance to the target, the Probability of Assessment (PAs) can be determined as a function of a variety of conditions or assumptions. PAs used as an MOE allows the systems engineer to conduct trade studies, make informed design decisions, or evaluate new higher-risk technologies. This paper outlines general video system design trade-offs, discusses ways video can be used to increase system performance and lists MOEs for video systems used in subjective applications such as alarm assessment.

  11. High performance magnet power supply optimization

    Jackson, L.T.

    1988-01-01

    The power supply system for the joint LBL--SLAC proposed accelerator PEP provides the opportunity to take a fresh look at the current techniques employed for controlling large amounts of dc power and the possibility of using a new one. A basic requirement of +- 100 ppM regulation is placed on the guide field of the bending magnets and quadrupoles placed around the 2200 meter circumference of the accelerator. The optimization questions to be answered by this paper are threefold: Can a firing circuit be designed to reduce the combined effects of the harmonics and line voltage combined effects of the harmonics and line voltage unbalance to less than 100 ppM in the magnet field. Given the ambiguity of the previous statement, is the addition of a transistor bank to a nominal SCR controlled system the way to go or should one opt for an SCR chopper system running at 1 KHz where multiple supplies are fed from one large dc bus and the cost--performance evaluation of the three possible systems

  12. High Dynamic Performance Nonlinear Source Emulator

    Nguyen-Duy, Khiem; Knott, Arnold; Andersen, Michael A. E.

    2016-01-01

    As research and development of renewable and clean energy based systems is advancing rapidly, the nonlinear source emulator (NSE) is becoming very essential for testing of maximum power point trackers or downstream converters. Renewable and clean energy sources play important roles in both...... terrestrial and nonterrestrial applications. However, most existing NSEs have only been concerned with simulating energy sources in terrestrial applications, which may not be fast enough for testing of nonterrestrial applications. In this paper, a high-bandwidth NSE is developed that is able to simulate...... change in the input source but also to a load step between nominal and open circuit. Moreover, all of these operation modes have a very fast settling time of only 10 μs, which is hundreds of times faster than that of existing works. This attribute allows for higher speed and a more efficient maximum...

  13. High-Performance Energy Applications and Systems

    Miller, Barton [Univ. of Wisconsin, Madison, WI (United States)

    2014-01-01

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “Foundational Tools for Petascale Computing”, SC0003922/FG02-10ER25940, UW PRJ27NU.

  14. High performance multiple stream data transfer

    Rademakers, F.; Saiz, P.

    2001-01-01

    The ALICE detector at LHC (CERN), will record raw data at a rate of 1.2 Gigabytes per second. Trying to analyse all this data at CERN will not be feasible. As originally proposed by the MONARC project, data collected at CERN will be transferred to remote centres to use their computing infrastructure. The remote centres will reconstruct and analyse the events, and make available the results. Therefore high-rate data transfer between computing centres (Tiers) will become of paramount importance. The authors will present several tests that have been made between CERN and remote centres in Padova (Italy), Torino (Italy), Catania (Italy), Lyon (France), Ohio (United States), Warsaw (Poland) and Calcutta (India). These tests consisted, in a first stage, of sending raw data from CERN to the remote centres and back, using a ftp method that allows connections of several streams at the same time. Thanks to these multiple streams, it is possible to increase the rate at which the data is transferred. While several 'multiple stream ftp solutions' already exist, the authors' method is based on a parallel socket implementation which allows, besides files, also objects (or any large message) to be send in parallel. A prototype will be presented able to manage different transfers. This is the first step of a system to be implemented that will be able to take care of the connections with the remote centres to exchange data and monitor the status of the transfer

  15. High performance parallel backprojection on FPGA

    Pfanner, Florian; Knaup, Michael; Kachelriess, Marc [Erlangen-Nuernberg Univ., Erlangen (Germany). Inst. of Medical Physics (IMP)

    2011-07-01

    Reconstruction of tomographic images, i.e., images from a Computed Tomography scanner, is a very time consuming issue. The most calculation power is needed for the backprojection step. A closer inspection shows that the algorithm for backprojection is easy to parallelize. FPGAs are able to execute many operations in the same time, so a highly parallel algorithm is a requirement for a powerful acceleration. For data flow rate maximization, we realized the backprojection in a pipelined structure with data throughput of one clock cycle. Due the hardware limitations of the FPGA, it is not possible to reconstruct the image as a whole. So it is necessary to split up the image and reconstruct these parts separately. Despite that, a reconstruction of 512 projections into a 5122 image is calculated within 13 ms on a Virtex 5 FPGA. To save hardware resources we use fixed point arithmetic with an accuracy of 23 bit for calculation. A comparison of the result image and an image, calculated with floating point arithmetic on CPU, shows that there are no differences between these images. (orig.)

  16. Technologies of high-performance thermography systems

    Breiter, R.; Cabanski, Wolfgang A.; Mauk, K. H.; Kock, R.; Rode, W.

    1997-08-01

    A family of 2 dimensional detection modules based on 256 by 256 and 486 by 640 platinum silicide (PtSi) focal planes, or 128 by 128 and 256 by 256 mercury cadmium telluride (MCT) focal planes for applications in either the 3 - 5 micrometer (MWIR) or 8 - 10 micrometer (LWIR) range was recently developed by AIM. A wide variety of applications is covered by the specific features unique for these two material systems. The PtSi units provide state of the art correctability with long term stable gain and offset coefficients. The MCT units provide extremely fast frame rates like 400 Hz with snapshot integration times as short as 250 microseconds and with a thermal resolution NETD less than 20 mK for e.g. the 128 by 128 LWIR module. The unique design idea general for all of these modules is the exclusively digital interface, using 14 bit analog to digital conversion to provide state of the art correctability, access to highly dynamic scenes without any loss of information and simplified exchangeability of the units. Device specific features like bias voltages etc. are identified during the final test and stored in a memory on the driving electronics. This concept allows an easy exchange of IDCAs of the same type without any need for tuning or e.g. the possibility to upgrade a PtSi based unit to an MCT module by just loading the suitable software. Miniaturized digital signal processor (DSP) based image correction units were developed for testing and operating the units with output data rates of up to 16 Mpixels/s. These boards provide the ability for freely programmable realtime functions like two point correction and various data manipulations in thermography applications.

  17. High energy permanent magnets - Solutions to high performance devices

    Ma, B.M.; Willman, C.J.

    1986-01-01

    Neodymium iron boron magnets are a special class of magnets providing the highest level of performance with the least amount of material. Crucible Research Center produced the highest energy product magnet of 45 MGOe - a world record. Commercialization of this development has already taken place. Crucible Magnetics Division, located in Elizabethtown, Kentucky, is currently manufacturing and marketing six different grades of NdFeB magnets. Permanent magnets find application in motors, speakers, electron beam focusing devices for military and Star Wars. The new NdFeB magnets are of considerable interest for a wide range of applications

  18. DOE research in utilization of high-performance computers

    Buzbee, B.L.; Worlton, W.J.; Michael, G.; Rodrigue, G.

    1980-12-01

    Department of Energy (DOE) and other Government research laboratories depend on high-performance computer systems to accomplish their programatic goals. As the most powerful computer systems become available, they are acquired by these laboratories so that advances can be made in their disciplines. These advances are often the result of added sophistication to numerical models whose execution is made possible by high-performance computer systems. However, high-performance computer systems have become increasingly complex; consequently, it has become increasingly difficult to realize their potential performance. The result is a need for research on issues related to the utilization of these systems. This report gives a brief description of high-performance computers, and then addresses the use of and future needs for high-performance computers within DOE, the growing complexity of applications within DOE, and areas of high-performance computer systems warranting research. 1 figure

  19. High-Performance Management Practices and Employee Outcomes in Denmark

    Cristini, Annalisa; Eriksson, Tor; Pozzoli, Dario

    High-performance work practices are frequently considered to have positive effects on corporate performance, but what do they do for employees? After showing that organizational innovation is indeed positively associated with firm performance, we investigate whether high-involvement work practices...

  20. Perpetuating "scientific motherhood": infant feeding discourse in Parents magazine, 1930-2007.

    Foss, Katherine A

    2010-05-01

    Although breastfeeding initiation rates have recently been at an all-time high, duration continues to be considerably low. Given the health benefits associated with extended breastfeeding, this discrepancy is cause for concern. This research examined the messages conveyed about infant feeding in a popular parenting magazine, Parents magazine, from 1930 through 2007. Findings indicated that the messages about infant feeding shifted in accordance with changing ideologies about the means of infant feeding-from bottle-feeding to breastfeeding. However, even with changing attitudes toward infant feeding, writers used scientific evidence and the advice of "experts" to justify the dominant form of feeding. The absence of practical advice regarding breastfeeding challenges, especially from "real" women set up false expectations about the breastfeeding experience, painting it as "natural" and best for the baby. The dependency on experts and lack of practical advice in popular media, like Parents magazine, may help explain a societal trend that downplays breastfeeding obstacles, giving insight into the vast discrepancy between breastfeeding initiation and duration.

  1. Academic performance in high school as factor associated to academic performance in college

    Mileidy Salcedo Barragán

    2008-12-01

    Full Text Available This study intends to find the relationship between academic performance in High School and College, focusing on Natural Sciences and Mathematics. It is a descriptive correlational study, and the variables were academic performance in High School, performance indicators and educational history. The correlations between variables were established with Spearman’s correlation coefficient. Results suggest that there is a positive relationship between academic performance in High School and Educational History, and a very weak relationship between performance in Science and Mathematics in High School and performance in College.

  2. Music in Serbian literary magazine and Yugoslav ideology

    Vasić Aleksandar N.

    2004-01-01

    Full Text Available It is worth noting that the important journal of the history of Serbian literature and music, the Serbian Literary Magazine (1901 - 1914, 1920 1941, became more Yugoslav-oriented within a relatively short period following its inception. From its early beginning to 1906, the Magazine’s musical critics did not actively express its Yugoslav ideology. But from 1907 there was an increase of interest in both the music and the musicians from Croatia and Slovenia. In 1911 the Croatian Opera spent almost two weeks in Belgrade performing; the composer and musicologist, Miloje Milojević began to develop the idea of union with Slavs from the South in a critical analysis he rendered of their performance. Until the end of the first/old series, SLM highlighted a noticeable number of texts about Croatians and Slovenians: critical reviews of Croatian musical books, concerts of Slovenian artists in Belgrade, score editions of Slovenian music performances of instrument soloists from Zagreb in Belgrade - as well as notes about the musical work of Croatian Academy (Yugoslav Academy of Sciences and Arts, Zagreb. Echoes of rare tours of Serbian musicians in South Slavs cultural centers did not go unheard, either. In the older series of the journal, lasting and two-fold relations had already begun to lean towards Yugoslav ideology. From one side, even before World War I, Yugoslav ideology in the Magazine was accepted as a program objective of Serbian political and cultural elite. On the other, the journal does not appear to have negotiated any of its aesthetic criterion when estimating musical events that came from Zagreb and Ljubljana to Belgrade - at least not "in the name of Yugoslav ideology". In later series of SLM, the Yugoslav platform was being represented as official ideological statehood of newly created Kingdoms of Serbs, Croats and Slovenians (1918, i.e., the Kingdom of Yugoslavia (1929. At that time, the Magazine had occasional literary cooperation from

  3. Performance of a high efficiency high power UHF klystron

    Konrad, G.T.

    1977-03-01

    A 500 kW c-w klystron was designed for the PEP storage ring at SLAC. The tube operates at 353.2 MHz, 62 kV, a microperveance of 0.75, and a gain of approximately 50 dB. Stable operation is required for a VSWR as high as 2 : 1 at any phase angle. The design efficiency is 70%. To obtain this value of efficiency, a second harmonic cavity is used in order to produce a very tightly bunched beam in the output gap. At the present time it is planned to install 12 such klystrons in PEP. A tube with a reduced size collector was operated at 4% duty at 500 kW. An efficiency of 63% was observed. The same tube was operated up to 200 kW c-w for PEP accelerator cavity tests. A full-scale c-w tube reached 500 kW at 65 kV with an efficiency of 55%. In addition to power and phase measurements into a matched load, some data at various load mismatches are presented

  4. High Performance Computing in Science and Engineering '08 : Transactions of the High Performance Computing Center

    Kröner, Dietmar; Resch, Michael

    2009-01-01

    The discussions and plans on all scienti?c, advisory, and political levels to realize an even larger “European Supercomputer” in Germany, where the hardware costs alone will be hundreds of millions Euro – much more than in the past – are getting closer to realization. As part of the strategy, the three national supercomputing centres HLRS (Stuttgart), NIC/JSC (Julic ¨ h) and LRZ (Munich) have formed the Gauss Centre for Supercomputing (GCS) as a new virtual organization enabled by an agreement between the Federal Ministry of Education and Research (BMBF) and the state ministries for research of Baden-Wurttem ¨ berg, Bayern, and Nordrhein-Westfalen. Already today, the GCS provides the most powerful high-performance computing - frastructure in Europe. Through GCS, HLRS participates in the European project PRACE (Partnership for Advances Computing in Europe) and - tends its reach to all European member countries. These activities aligns well with the activities of HLRS in the European HPC infrastructur...

  5. Inclusive vision for high performance computing at the CSIR

    Gazendam, A

    2006-02-01

    Full Text Available and computationally intensive applications. A number of different technologies and standards were identified as core to the open and distributed high-performance infrastructure envisaged...

  6. High Performance Low Mass Nanowire Enabled Heatpipe, Phase II

    National Aeronautics and Space Administration — Heat pipes are widely used for passive, two-phase electronics cooling. As advanced high power, high performance electronics in space based and terrestrial...

  7. High performance leadership in unusually challenging educational circumstances

    Andy Hargreaves

    2015-04-01

    Full Text Available This paper draws on findings from the results of a study of leadership in high performing organizations in three sectors. Organizations were sampled and included on the basis of high performance in relation to no performance, past performance, performance among similar peers and performance in the face of limited resources or challenging circumstances. The paper concentrates on leadership in four schools that met the sample criteria.  It draws connections to explanations of the high performance ofEstoniaon the OECD PISA tests of educational achievement. The article argues that leadership in these four schools that performed above expectations comprised more than a set of competencies. Instead, leadership took the form of a narrative or quest that pursued an inspiring dream with relentless determination; took improvement pathways that were more innovative than comparable peers; built collaboration and community including with competing schools; and connected short-term success to long-term sustainability.

  8. Characteristics of medication advertisements found in US women's fashion magazines.

    Mongiovi, Jennifer; Clarke Hillyer, Grace; Basch, Corey H; Ethan, Danna; Hammond, Rodney

    2017-01-01

    Background: Although prescriptions are dispensed at discretion of medical professionals, many pharmaceutical companies use direct-to-consumer (DTC) advertising to increase sales. Over-the-counter (OTC) medications are similarly marketed. Methods: We examined the content of advertisements in 38 issues of 9 popular US women's fashion magazines. We evaluated target audience, health condition, product availability, message appeal, target to females, and mention of potential side effects and benefits. Results: Sixty total medication advertisements were identified, 58.3% (95% CI: 45.8, 70.8) for prescription products. In magazines targeted to non-Hispanic Whites, >65% of advertisements were for OTC medications whereas 80% (95% CI: 66.7, 94.5) of advertisements found in Black/Latina magazines were for prescription medications. The rational appeal was used most commonly in non-Hispanic White magazines (75.9%; 95% CI: 60.3, 91.5). Emotional appeal was featured more often in prescription advertisements magazines (60.0; 95% CI:43.8, 76.2) compared to OTC (8.0; 95% CI: -2.6, 18.6). Conclusion: Although emotional appeal may be effective for selling medication to women, it often does not completely inform consumers of potential risks.

  9. Food Advertisements in Two Popular U.S. Parenting Magazines: Results of a Five-Year Analysis

    Basch, Corey H.; Hammond, Rodney N.; Ethan, Danna; Samuel, Lalitha

    2014-01-01

    Obesity rates among American youth have prompted an examination of food advertisements geared towards children. Research indicates children’s high exposure to these advertisements and their influence on food preferences. Less is known about the presence of these advertisements in parenting magazines. This study’s objective was to examine prevalence of food advertisements in popular parenting magazines and identify products by USDA food category. We analyzed 116 issues of two popular U.S. parenting magazines across five years. All food and beverage advertisements for USDA Food Category were coded. Breakfast cereals were coded for nutritional quality. The coding took place at varied libraries in New Jersey, in the United States. A total of 19,879 food and beverage products were analyzed. One-third of advertisements (32.5%) were for baked goods, snacks, and sweets -- products generally low in nutrient density. Two-thirds of the breakfast cereals were low in nutritional quality (64.6%). Beverages comprised 11% of the advertisements, fruit juices the highest proportion. Less than 3% of advertisements were for fruits and vegetables combined. No significant food product trends were evident across the five-year period. Food advertisements identified in parenting magazines were generally low in nutritional value. Additional research is necessary to determine the influence of food advertisements on parents’ purchasing habits. PMID:24576378

  10. Food advertisements in two popular U.S. parenting magazines: results of a five-year analysis.

    Basch, Corey Hannah; Hammond, Rodney; Ethan, Danna; Samuel, Lalitha

    2013-12-24

    Obesity rates among American youth have prompted an examination of food advertisements geared towards children. Research indicates children's high exposure to these advertisements and their influence on food preferences. Less is known about the presence of these advertisements in parenting magazines. This study's objective was to examine prevalence of food advertisements in popular parenting magazines and identify products by USDA food category. We analyzed 116 issues of two popular U.S. parenting magazines across five years. All food and beverage advertisements for USDA Food Category were coded. Breakfast cereals were coded for nutritional quality. The coding took place at varied libraries in New Jersey, in the United States. A total of 19,879 food and beverage products were analyzed. One-third of advertisements (32.5%) were for baked goods, snacks, and sweets -- products generally low in nutrient density. Two-thirds of the breakfast cereals were low in nutritional quality (64.6%). Beverages comprised 11% of the advertisements, fruit juices the highest proportion. Less than 3% of advertisements were for fruits and vegetables combined. No significant food product trends were evident across the five-year period. Food advertisements identified in parenting magazines were generally low in nutritional value. Additional research is necessary to determine the influence of food advertisements on parents' purchasing habits.

  11. For Distinguished Public Service: Medical Library Association Honors FNLM and NIH MedlinePlus Magazine | NIH ...

    ... Medical Library Association Honors FNLM and NIH MedlinePlus Magazine Past Issues / Summer 2011 Table of Contents MLA ... From You We want your feedback on the magazine and ideas for future issues, as well as ...

  12. The Match of Her Life | NIH MedlinePlus the Magazine

    ... answer questions for this issue of NIH MedlinePlus magazine about her breast cancer. You discovered you had ... way of healing. As this issue of the magazine went to press, Navratilova was receiving radiation therapy ...

  13. Examination of muscularity and body fat depictions in magazines that target heterosexual and gay men.

    Lanzieri, Nicholas; Cook, Brian J

    2013-03-01

    Previous content analyses of magazine images have typically examined within genres but failed to include comparisons between publications intended for various populations. The purpose of this study was to examine depictions of muscularity and thinness of male images in several widely distributed magazines that target male audiences from a variety of genres. Twenty-three magazine titles with the highest circulation rates that targeted heterosexual men, gay men, and general audiences were selected for image analyses. We found that magazines that target gay male audiences depicted images of men who were thinner in comparison to magazines targeting heterosexual men. Both gay and heterosexual magazines depicted male images with greater muscularity than magazines intended for general audiences. Differences in male image depictions in magazines may contribute to the promotion of an unattainable body ideal in some subgroups of gay culture. Copyright © 2012 Elsevier Ltd. All rights reserved.

  14. Sex Differences in Mathematics Performance among Senior High ...

    This study explored sex differences in mathematics performance of students in the final year of high school and changes in these differences over a 3-year period in Ghana. A convenience sample of 182 students, 109 boys and 72 girls in three high schools in Ghana was used. Mathematics performance was assessed using ...

  15. Control switching in high performance and fault tolerant control

    Niemann, Hans Henrik; Poulsen, Niels Kjølstad

    2010-01-01

    The problem of reliability in high performance control and in fault tolerant control is considered in this paper. A feedback controller architecture for high performance and fault tolerance is considered. The architecture is based on the Youla-Jabr-Bongiorno-Kucera (YJBK) parameterization. By usi...

  16. Mechanical Properties of High Performance Cementitious Grout (II)

    Sørensen, Eigil V.

    The present report is an update of the report “Mechanical Properties of High Performance Cementitious Grout (I)” [1] and describes tests carried out on the high performance grout MASTERFLOW 9500, marked “WMG 7145 FP”, developed by BASF Construction Chemicals A/S and designed for use in grouted...

  17. Development of new high-performance stainless steels

    Park, Yong Soo

    2002-01-01

    This paper focused on high-performance stainless steels and their development status. Effect of nitrogen addition on super-stainless steel was discussed. Research activities at Yonsei University, on austenitic and martensitic high-performance stainless, steels, and the next-generation duplex stainless steels were introduced

  18. Micromagnetics on high-performance workstation and mobile computational platforms

    Fu, S.; Chang, R.; Couture, S.; Menarini, M.; Escobar, M. A.; Kuteifan, M.; Lubarda, M.; Gabay, D.; Lomakin, V.

    2015-05-01

    The feasibility of using high-performance desktop and embedded mobile computational platforms is presented, including multi-core Intel central processing unit, Nvidia desktop graphics processing units, and Nvidia Jetson TK1 Platform. FastMag finite element method-based micromagnetic simulator is used as a testbed, showing high efficiency on all the platforms. Optimization aspects of improving the performance of the mobile systems are discussed. The high performance, low cost, low power consumption, and rapid performance increase of the embedded mobile systems make them a promising candidate for micromagnetic simulations. Such architectures can be used as standalone systems or can be built as low-power computing clusters.

  19. High Performance Walls in Hot-Dry Climates

    Hoeschele, Marc [National Renewable Energy Lab. (NREL), Golden, CO (United States); Springer, David [National Renewable Energy Lab. (NREL), Golden, CO (United States); Dakin, Bill [National Renewable Energy Lab. (NREL), Golden, CO (United States); German, Alea [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-01-01

    High performance walls represent a high priority measure for moving the next generation of new homes to the Zero Net Energy performance level. The primary goal in improving wall thermal performance revolves around increasing the wall framing from 2x4 to 2x6, adding more cavity and exterior rigid insulation, achieving insulation installation criteria meeting ENERGY STAR's thermal bypass checklist, and reducing the amount of wood penetrating the wall cavity.

  20. High Performance Computing Modernization Program Kerberos Throughput Test Report

    2017-10-26

    Naval Research Laboratory Washington, DC 20375-5320 NRL/MR/5524--17-9751 High Performance Computing Modernization Program Kerberos Throughput Test ...NUMBER 5d. PROJECT NUMBER 5e. TASK NUMBER 5f. WORK UNIT NUMBER 2. REPORT TYPE1. REPORT DATE (DD-MM-YYYY) 4. TITLE AND SUBTITLE 6. AUTHOR(S) 8. PERFORMING...PAGE 18. NUMBER OF PAGES 17. LIMITATION OF ABSTRACT High Performance Computing Modernization Program Kerberos Throughput Test Report Daniel G. Gdula* and

  1. 30 ans de photographie au New York Times Magazine

    Anne Lesme

    2012-01-01

       « Les photographies du New York Times Magazine », Chapelle Sainte-Anne, Arles, 4 juillet – 4 septembre 2011 Kathy Ryan – directrice de la photographie du New York Times Magazine – et Lesley A. Martin, commissaires d’exposition. Visite d’exposition, le 7 juillet 2011. Dans le cadre d’une thématique placée sous le signe du « document », les Rencontres d’Arles de l’été 2011 offrent une exposition inédite en l’honneur des trente ans du New York Times Magazine. Onze installations dans la cha...

  2. 30 ans de photographie au New York Times Magazine

    Anne Lesme

    2012-01-01

    Full Text Available   « Les photographies du New York Times Magazine », Chapelle Sainte-Anne, Arles, 4 juillet – 4 septembre 2011Kathy Ryan – directrice de la photographie du New York Times Magazine – et Lesley A. Martin, commissaires d’exposition. Visite d’exposition, le 7 juillet 2011.Dans le cadre d’une thématique placée sous le signe du « document », les Rencontres d’Arles de l’été 2011 offrent une exposition inédite en l’honneur des trente ans du New York Times Magazine. Onze installations dans la chapelle ...

  3. Service Journalism in the Association Magazine: A Case Study of the "Angus Journal."

    Jeffers, Dennis W.

    Examining the role of service journalism in association magazines (magazines focusing on technical and educational information relating to specific practices of association members), a case study of the "Angus Journal" (a monthly magazine devoted to the beef breeding industry) investigated the problem of determining the amount of service…

  4. 32 CFR Appendix E to Part 247 - DoD Command Newspaper and Magazine Review System

    2010-07-01

    ... 32 National Defense 2 2010-07-01 2010-07-01 false DoD Command Newspaper and Magazine Review System... OF DEFENSE (CONTINUED) MISCELLANEOUS DEPARTMENT OF DEFENSE NEWSPAPERS, MAGAZINES AND CIVILIAN ENTERPRISE PUBLICATIONS Pt. 247, App. E Appendix E to Part 247—DoD Command Newspaper and Magazine Review...

  5. 49 CFR 176.194 - Stowage of Class 1 (explosive) materials on magazine vessels.

    2010-10-01

    ... magazine vessels. 176.194 Section 176.194 Transportation Other Regulations Relating to Transportation... REGULATIONS CARRIAGE BY VESSEL Detailed Requirements for Class 1 (Explosive) Materials Magazine Vessels § 176.194 Stowage of Class 1 (explosive) materials on magazine vessels. (a) General. The requirements of...

  6. 30 CFR 75.1312 - Explosives and detonators in underground magazines.

    2010-07-01

    ... magazines. 75.1312 Section 75.1312 Mineral Resources MINE SAFETY AND HEALTH ADMINISTRATION, DEPARTMENT OF... Blasting § 75.1312 Explosives and detonators in underground magazines. (a) The quantity of explosives kept..., explosives and detonators taken underground shall be kept in— (1) Separate, closed magazines at least 5 feet...

  7. Literary Aspects of a Girlie Magazine: The Literary Contributions of Esquire, 1933-43.

    Peterson, Thane

    From its inauspicious beginnings as a men's store giveaway and a "girlie" magazine in 1933, "Esquire" magazine quickly established a policy of literary excellence. By 1945, the magazine included the works on such major literary figures as Erskine Caldwell, John Dos Passos, Dashiell Hammett, Ernest Hemingway, Ring Lardner, James…

  8. Performance characterization of solid oxide cells under high pressure

    Sun, Xiufu; Bonaccorso, Alfredo Damiano; Graves, Christopher R.

    2014-01-01

    in both fuel cell mode and electrolysis mode. In electrolysis mode at low current density, the performance improvement was counteracted by the increase in open circuit voltage, but it has to be born in mind that the pressurised gas contains higher molar free energy. Operating at high current density...... hydrocarbon fuels, which is normally performed at high pressure to achieve a high yield. Operation of SOECs at elevated pressure will therefore facilitate integration with the downstream fuel synthesis and is furthermore advantageous as it increases the cell performance. In this work, recent pressurised test...... results of a planar Ni-YSZ (YSZ: Yttria stabilized Zirconia) supported solid oxide cell are presented. The test was performed at 800 °C at pressures up to 15 bar. A comparison of the electrochemical performance of the cell at 1 and 3 bar shows a significant and equal performance gain at higher pressure...

  9. High performance current controller for particle accelerator magnets supply

    Maheshwari, Ram Krishan; Bidoggia, Benoit; Munk-Nielsen, Stig

    2013-01-01

    The electromagnets in modern particle accelerators require high performance power supply whose output is required to track the current reference with a very high accuracy (down to 50 ppm). This demands very high bandwidth controller design. A converter based on buck converter topology is used...

  10. High performance direct methanol fuel cell with thin electrolyte membrane

    Wan, Nianfang

    2017-06-01

    A high performance direct methanol fuel cell is achieved with thin electrolyte membrane. 320 mW cm-2 of peak power density and over 260 mW cm-2 at 0.4 V are obtained when working at 90 °C with normal pressure air supply. It is revealed that the increased anode half-cell performance with temperature contributes primarily to the enhanced performance at elevated temperature. From the comparison of iR-compensated cathode potential of methanol/air with that of H2/air fuel cell, the impact of methanol crossover on cathode performance decreases with current density and becomes negligible at high current density. Current density is found to influence fuel efficiency and methanol crossover significantly from the measurement of fuel efficiency at different current density. At high current density, high fuel efficiency can be achieved even at high temperature, indicating decreased methanol crossover.

  11. [Body hair and advertising in French magazines].

    Héas, S; Bodin, D; Robène, L; Misery, L

    2007-10-01

    Sociological analysis of advertising reveals the currently operative body codes within a society, and more fundamentally, depicts the (ideal) relationships between men and women, between generations, and so on. To demonstrate that sports advertising based largely on trichological stereotypes. The idealised portrayal of human relations in advertisements (N=700) taken from French magazines was analysed by means of systematic coding and use of analytical software. This approach allowed characterisation of each advertisement in relation to the entire sample, with identification of significant elements (dominant colour, stature of models, setting, etc.), and determination of frequency of appearance and occurrence as well as testing of dependency relations. There were significant differences in the portrayal of men and women in advertisements. In the 700 advertisements in the series we examined, male subjects very often had short hair (231 cases, 33%) or shaved heads (33 cases, 4.7%) while women were shown with long hair, either free (80 cases) or tied (73 cases). Women with short hair were rarely portrayed (4.3%), as were men with long hair (42 cases, 6%). Above all, with the exception of eyebrows and eyelashes, no other body hair was seen in male and female athletic figures in 238 advertisements, being visible in only 60 cases (8.6%). Facial stubble, and more particularly beards and moustaches, was fairly infrequent, despite the omnipresence of male models. The majority of advertising situations involving sporting figures show clear stereotyping. Body hair is a pertinent pointer to understanding of contemporary sports models. A clear overall male/female distinction was present throughout. Men were presented in these adverts as active figures, leaders, etc. while women tended to be passive, spectators, and in some cases, admiring onlookers. A degree of confusion between genders was noticeable as a result of the shaving and depilation trends currently in vogue in the

  12. High Performance Work System, HRD Climate and Organisational Performance: An Empirical Study

    Muduli, Ashutosh

    2015-01-01

    Purpose: This paper aims to study the relationship between high-performance work system (HPWS) and organizational performance and to examine the role of human resource development (HRD) Climate in mediating the relationship between HPWS and the organizational performance in the context of the power sector of India. Design/methodology/approach: The…

  13. The Role of Performance Management in Creating and Maintaining a High-Performance Organization

    André A. de Waal

    2015-04-01

    Full Text Available There is still a good deal of confusion in the literature about how the use of a performance management system affects overall organizational performance. Some researchers find that performance management enhances both the financial and non-financial results of an organization, while others do not find any positive effects or, at most, ambiguous effects. An important step toward getting more clarity in this relationship is to investigate the role performance management plays in creating and maintaining a high-performance organization (HPO. The purpose of this study is to integrate performance management analysis (PMA and high-performance organization (HPO. A questionnaire combining questions on PMA dimensions and HPO factors was administered to two European-based multinational firms. Based on 468 valid questionnaires, a correlation analysis was performed on the PMA dimensions and the HPO factors in order to test the impact of performance management on the factors of high organizational performance. The results show strong and significant correlations between all the PMA dimensions and all the HPO factors, indicating that a performance management system that fosters performance-driven behavior in the organization is of critical importance to strengthen overall financial and non-financial performance.

  14. High-definition television evaluation for remote handling task performance

    Fujita, Y.; Omori, E.; Hayashi, S.; Draper, J.V.; Herndon, J.N.

    1986-01-01

    In a plant that employs remote handling techniques for equipment maintenance, operators perform maintenance tasks primarily by using the information from television systems. The efficiency of the television system has a significant impact on remote maintenance task performance. High-definition television (HDTV) transmits a video image with more than twice the number of horizontal scan lines as standard-resolution television (1125 for HDTV to 525 for standard-resolution NTSC television). The added scan lines dramatically improve the resolution of images on the HDTV monitors. This paper describes experiments designed to evaluate the impact of HDTV on the performance of typical remote tasks. The experiments described in this paper compared the performance of four operators using HDTV with their performance while using other television systems. The experiments included four television systems: (a) high-definition color television, (b) high-definition monochromatic television, (c) standard-resolution monochromatic television, and (d) standard-resolution stereoscopic monochromatic television

  15. Liberated and inclusive? An analysis of self-representation in a popular lesbian magazine.

    Gonsoulin, Margaret E

    2010-01-01

    Comparisons of a popular lesbian lifestyle magazine to a popular heterosexual women's magazine show that lesbian-controlled media do indeed expand representation when it comes to weight, age, and degree of femininity/masculinity, but not in terms of racial representation. An examination of the textual material and visual images also shows that the lesbian publication gives women a more active role, while the heterosexual magazine depicts females as more passive. However, the evidence also shows that the lesbian and heterosexual magazines have similar rates of objectification, but substantively, the lesbian magazine is less severe in degree of objectification.

  16. How Black women make sense of 'White' and 'Black' fashion magazines: a qualitative think aloud study.

    Ogden, Jane; Russell, Sheriden

    2013-12-01

    This qualitative think aloud study explored how Black women (n = 32) processed information from a White or Black fashion magazine. Comments to the 'White' magazine were characterised by rejection, being critical of the media and ambivalence, whereas they responded to the 'Black' magazine with celebration, identification and a search for depth. Transcending these themes was their self-identity of being a Black woman that was brought to the fore either by a sense of exclusion (White magazine) or engagement (Black magazine). Such an identity provides resilience against the media's thin ideals by minimising the processes of social comparison and internalisation.

  17. Energy Design Guidelines for High Performance Schools: Tropical Island Climates

    None

    2004-11-01

    Design guidelines outline high performance principles for the new or retrofit design of K-12 schools in tropical island climates. By incorporating energy improvements into construction or renovation plans, schools can reduce energy consumption and costs.

  18. academic performance of less endowed high school students

    User

    girls) who obtained the basic requirements for courses that they ... Academic performance of students from less endowed senior high ... 106 ... only pay academic facility user fees. The second ..... certificate education, Pro is senior executive.

  19. Multicast Performance Analysis for High-Speed Torus Networks

    Oral, S; George, A

    2002-01-01

    ... for unicast-based and path-based multicast communication on high-speed torus networks. Software-based multicast performance results of selected algorithms on a 16-node Scalable Coherent Interface (SCI) torus are given...

  20. Decal electronics for printed high performance cmos electronic systems

    Hussain, Muhammad Mustafa; Sevilla, Galo Torres; Cordero, Marlon Diaz; Kutbee, Arwa T.

    2017-01-01

    High performance complementary metal oxide semiconductor (CMOS) electronics are critical for any full-fledged electronic system. However, state-of-the-art CMOS electronics are rigid and bulky making them unusable for flexible electronic applications