High frequency and pulse scattering physical acoustics
Pierce, Allan D
1992-01-01
High Frequency and Pulse Scattering investigates high frequency and pulse scattering, with emphasis on the phenomenon of echoes from objects. Geometrical and catastrophe optics methods in scattering are discussed, along with the scattering of sound pulses and the ringing of target resonances. Caustics and associated diffraction catastrophes are also examined.Comprised of two chapters, this volume begins with a detailed account of geometrically based approximation methods in scattering theory, focusing on waves transmitted through fluid and elastic scatterers and glory scattering; surface ray r
Collective Thomson scattering measurements with high frequency resolution at TEXTOR
DEFF Research Database (Denmark)
Stejner Pedersen, Morten; Nielsen, Stefan Kragh; Korsholm, Søren Bang
2010-01-01
We discuss the development and first results of a receiver system for the collective Thomson scattering (CTS) diagnostic at TEXTOR with frequency resolution in the megahertz range or better. The improved frequency resolution expands the diagnostic range and utility of CTS measurements in general...
Goertz, David E.; Frijlink, Martijn E.; de Jong, N.; van der Steen, A.F.W.
2006-01-01
An experimental lipid encapsulated contrast agent comprised substantially of micrometer to submicrometer diameter bubbles was evaluated for its capacity to produce nonlinear scattering in response to high transmit frequencies. Agent characterization experiments were conducted at transmit frequencies
Compressive inverse scattering: I. High-frequency SIMO/MISO and MIMO measurements
Fannjiang, Albert C.
2010-03-01
Inverse scattering from discrete targets with the single-input-multiple-output (SIMO), multiple-input-single-output (MISO) or multiple-input-multiple-output (MIMO) measurements is analyzed by compressed sensing theory with and without the Born approximation. High-frequency analysis of (probabilistic) recoverability by the L1-based minimization/regularization principles is presented. In the absence of noise, it is shown that the L1-based solution can recover exactly the target of sparsity up to the dimension of the data either with the MIMO measurement for the Born scattering or with the SIMO/MISO measurement for the exact scattering. The stability with respect to noisy data is proved for weak or widely separated scatterers. Reciprocity between the SIMO and MISO measurements is analyzed. Finally a coherence bound (and the resulting recoverability) is proved for diffraction tomography with high-frequency, few-view and limited-angle SIMO/MISO measurements.
DEFF Research Database (Denmark)
Bjerrum-Niese, Christian; Jensen, Leif Bjørnø
1994-01-01
Temporal variations of scattering of high-frequency, monochromatic signals from the ocean surface has been studied numerically. In the high-frequency domain the dynamic scattering can be modeled by a coherence function of the scattered pressure field, which is based on the Kirchhoff integral...... for the Pierson–Moskowitz spectrum (for a fully developed sea) with computations for the JONSWAP spectrum (for fetch-limited seas). The following results, among other issues, have been obtained: As the fetch decreases, the surface waves become shorter, leading to increasing frequency shifting of the scattered...... signal. [Work sponsored by the Danish Technical Research Council and the EU/MAST programme.]...
Electron Scattering by High-Frequency Whistler Waves at Earth's Bow Shock
Oka, M.; Wilson, L. B., III; Phan, T. D.; Hull, A. J.; Amano, T.; Hoshino, M.; Argall, M. R.; Le Contel, O.; Agapitov, O.; Gersham, D. J.;
2017-01-01
Electrons are accelerated to non-thermal energies at shocks in space and astrophysical environments. While different mechanisms of electron acceleration have been proposed, it remains unclear how non-thermal electrons are produced out of the thermal plasma pool. Here, we report in situ evidence of pitch-angle scattering of non-thermal electrons by whistler waves at Earths bow shock. On 2015 November 4, the Magnetospheric Multiscale (MMS) mission crossed the bow shock with an Alfvn Mach number is approximately 11 and a shock angle of approximately 84deg. In the ramp and overshoot regions, MMS revealed bursty enhancements of non-thermal (0.52 keV) electron flux, correlated with high-frequency (0.2 - 0.4 Omega(sub ce), where Omega(sub ce) is the cyclotron frequency) parallel-propagating whistler waves. The electron velocity distribution (measured at 30 ms cadence) showed an enhanced gradient of phase-space density at and around the region where the electron velocity component parallel to the magnetic field matched the resonant energy inferred from the wave frequency range. The flux of 0.5 keV electrons (measured at 1ms cadence) showed fluctuations with the same frequency. These features indicate that non-thermal electrons were pitch-angle scattered by cyclotron resonance with the high-frequency whistler waves. However, the precise role of the pitch-angle scattering by the higher-frequency whistler waves and possible nonlinear effects in the electron acceleration process remains unclear.
Measurements of high-frequency acoustic scattering from glacially-eroded rock outcrops
Olson, Derek R; Sæbo, Torstein
2016-01-01
Measurements of acoustic backscattering from glacially-eroded rock outcrops were made off the coast of Sandefjord, Norway using a high-frequency synthetic aperture sonar (SAS) system. A method by which scattering strength can be estimated from data collected by a SAS system is detailed, as well as a method to estimate an effective calibration parameter for the system. Scattering strength measurements from very smooth areas of the rock outcrops agree with predictions from both the small-slope approximation and perturbation theory, and range between -33 and -26 dB at 20$^\\circ$ grazing angle. Scattering strength measurements from very rough areas of the rock outcrops agree with the sine-squared shape of the empirical Lambertian model and fall between -30 and -20 dB at 20$^\\circ$ grazing angle. Both perturbation theory and the small-slope approximation are expected to be inaccurate for the very rough area, and overestimate scattering strength by 8 dB or more for all measurements of very rough surfaces. Supportin...
Low and high frequency asymptotics acoustic, electromagnetic and elastic wave scattering
Varadan, VK
2013-01-01
This volume focuses on asymptotic methods in the low and high frequency limits for the solution of scattering and propagation problems. Each chapter is pedagogical in nature, starting with the basic foundations and ending with practical applications. For example, using the Geometrical Theory of Diffraction, the canonical problem of edge diffraction is first solved and then used in solving the problem of diffraction by a finite crack. In recent times, the crack problem has been of much interest for its applications to Non-Destructive Evaluation (NDE) of flaws in structural materials.
High frequency collective excitations in molten Fe/Ni alloys studied by inelastic neutron scattering
Energy Technology Data Exchange (ETDEWEB)
Jimenez-Ruiz, M. [Institut Laue Langevin, 6 Rue Jules Horowitz, BP. 156, F-38042 Grenoble Cedex 9 (France)], E-mail: jimenez@ill.fr; Ruiz-Martin, M.D.; Cuello, G.J. [Institut Laue Langevin, 6 Rue Jules Horowitz, BP. 156, F-38042 Grenoble Cedex 9 (France); Fernandez-Perea, R. [Instituto de Estructura de la Materia, Consejo Superior de Investigacioens Cient' fcas, Serrano 123, E-28006 Madrid (Spain); Bermejo, F.J. [C.S.I.C., Department of Electricity and Electronics, UPV/EHU, Box 644, 4880 Bilbao (Spain)
2008-03-06
The spectra of liquid 85%Fe5%Ni10%S (T{sub m}=1650 K) and liquid 85%Fe15%Ni have been studied by means of inelastic neutron scattering. Our aim was to explore at high frequencies some observed anomalies as reported from ultrasound studies. Contrary to the behavior of the pure liquid-metals, the phase velocity of the observed excitation for the sulfur-containing sample increases with temperature while their damping decreases. On the other hand, data of the binary Fe/Ni alloy do not show such an anomalous behavior.
Computer-aided design-based high-frequency electromagnetic wave scattering from complex bodies
Baldauf, John Eric
1991-02-01
This work investigates the use of high frequency electromagnetic scattering techniques, such as the physical theory of diffraction (PTD) and the geometrical theory of diffraction (GTD) and the shooting and bouncing rays (SBR) method combined with computer aided design (CAD) compatible geometries, to perform the electromagnetic scattering analysis of complex arbitrary bodies. The use of CAD formats such as solid modelled bodies and bodies modelled with triangular patch surface elements allows the scattering analysis of arbitrary bodies which can be constructed using CAD packages. The scattering analyses are applied to radar cross section (RCS) problems, cavity radiation problems, and antenna pattern predictions of complex electrically large structures, thereby showing that it is feasible to accurately approximate the electromagnetic wave scattering from general complex bodies using CAD techniques and high frequency scattering techniques. First, the RCS of large targets which involve multiple geometric optics (GO) interactions are investigated by comparing the RCS calculated using CAD designed radar targets and the SBR method and PTD for targets such as trihedral corner reflectors and an idealized military vehicle model with the experimentally obtained RCS. The comparisons between the calculated and measured results demonstrate that the SBR and PTD can provide accurate approximations of the RCS for targets which have complex multiple GO interactions. Second, the problem of interior cavity radiation for closed cavities is approached using a ray tracing and GO method based on the SBR method and triangular surface patch described geometries. Comparisons between the ray-based calculations and more exact techniques such as the method of moments (MM) for two-dimensional cavities demonstrate that ray-based methods can provide good approximations for the field behavior inside of nonresonant cavities. A three-dimensional case is shown to demonstrate that this technique can be
Buscombe, D.; Grams, P. E.; Kaplinski, M. A.
2014-12-01
Bed sediment classification using high-frequency hydroacoustic instruments is challenging when sediments are spatially heterogeneous, which is often the case in rivers. The use of acoustic backscatter to classify sediments is an attractive alternative to analysis of topography because it is potentially sensitive to grain scale roughness. Here a new method is presented which uses high-frequency acoustic backscatter from multibeam sonar to classify heterogeneous riverbed sediments by type (sand, gravel, and rock) continuously in space and at small spatial resolution. In this, the first of a pair of papers that examine the scattering signatures from a heterogeneous riverbed, methods are presented to construct spatially explicit maps of spectral properties from georeferenced point clouds of geometrically and radiometrically corrected echoes. Backscatter power spectra are computed to produce scale and amplitude metrics that collectively characterize the length scales of stochastic measures of riverbed scattering, termed "stochastic geometries." Backscatter aggregated over small spatial scales have spectra that obey a power law. This apparently self-affine behavior could instead arise from morphological scale and grain scale roughnesses over multiple overlapping scales or riverbed scattering being transitional between Rayleigh and geometric regimes. Relationships exist between stochastic geometries of backscatter and areas of rough and smooth sediments. However, no one parameter can uniquely characterize a particular substrate nor definitively separate the relative contributions of roughness and acoustic impedance (hardness). Combinations of spectral quantities do, however, have the potential to delineate riverbed sediment patchiness, in a data-driven approach comparing backscatter with bed sediment observations (which is the subject of part two of this manuscript).
Characterizing riverbed sediment using high-frequency acoustics 1: spectral properties of scattering
Buscombe, Daniel D.; Grams, Paul E.; Kaplinski, Matt A.
2014-01-01
Bed-sediment classification using high-frequency hydro-acoustic instruments is challenging when sediments are spatially heterogeneous, which is often the case in rivers. The use of acoustic backscatter to classify sediments is an attractive alternative to analysis of topography because it is potentially sensitive to grain-scale roughness. Here, a new method is presented which uses high-frequency acoustic backscatter from multibeam sonar to classify heterogeneous riverbed sediments by type (sand, gravel,rock) continuously in space and at small spatial resolution. In this, the first of a pair of papers that examine the scattering signatures from a heterogeneous riverbed, methods are presented to construct spatially explicit maps of spectral properties from geo-referenced point clouds of geometrically and radiometrically corrected echoes. Backscatter power spectra are computed to produce scale and amplitude metrics that collectively characterize the length scales of stochastic measures of riverbed scattering, termed ‘stochastic geometries’. Backscatter aggregated over small spatial scales have spectra that obey a power-law. This apparently self-affine behavior could instead arise from morphological- and grain-scale roughnesses over multiple overlapping scales, or riverbed scattering being transitional between Rayleigh and geometric regimes. Relationships exist between stochastic geometries of backscatter and areas of rough and smooth sediments. However, no one parameter can uniquely characterize a particular substrate, nor definitively separate the relative contributions of roughness and acoustic impedance (hardness). Combinations of spectral quantities do, however, have the potential to delineate riverbed sediment patchiness, in a data-driven approach comparing backscatter with bed-sediment observations (which is the subject of part two of this manuscript).
High frequency VLBI observations of the scatter broadened quasar B2005+403
Gabanyi, K E; Britzen, S; Krichbaum, T P; Ros, E; Witzel, A; Zensus, J A
2006-01-01
The quasar B2005+403 located behind the Cygnus region, is a suitable object for studying the interplay between propagation effects, which are extrinsic to the source and source intrinsic variability. On the basis of VLBI experiments performed at 1.6, 5, 8, 15, 22, and 43GHz between 1992-2003 and parallel multi-frequency monitoring of the total flux density, we investigated the variability of total flux density and source structure. Below 8 GHz, the point-like VLBI source is affected by scatter-broadening of the turbulent interstellar medium, which is located along the line of sight and likely associated with the Cygnus region. We present and discuss the measured frequency dependence of the source size, which shows a power-law with slope of -1.91+/-0.05. From the measured scattering angle at 1GHz of 77.1+/-4.0mas a SM=0.43+/-0.04 m^{-20/3} kpc is derived, consistent with the general properties of the ISM in this direction. The decreasing effect of angular broadening towards higher frequencies allows to study t...
Majstorović, Josipa; Belinić, Tena; Namjesnik, Dalija; Dasović, Iva; Herak, Davorka; Herak, Marijan
2017-09-01
The central part of the External Dinarides (CED) is a geologically and tectonically complex region formed in the collision between the Adriatic microplate and the European plate. In this study, the contributions of intrinsic and scattering attenuation ( Q i - 1 and Q sc - 1 , respectively) to the total S-wave attenuation were calculated for the first time. The multiple lapse-time window analysis (MLTWA method), based on the assumptions of multiple isotropic scattering in a homogeneous medium with uniformly distributed scatterers, was applied to seismograms of 450 earthquakes recorded at six seismic stations. Selected events have hypocentral distances between 40 and 90 km with local magnitudes between 1.5 and 4.7. The analysis was performed over 11 frequency bands with central frequencies between 1.5 and 16 Hz. Results show that the seismic albedo of the studied area is less than 0.5 and Q i - 1 > Q sc - 1 at all central frequencies and for all stations. These imply that the intrinsic attenuation dominates over scattering attenuation in the whole study area. Calculated total S-wave and expected coda wave attenuation for CED are in a very good agreement with the ones measured in previous studies using the coda normalization and the coda-Q methods. All estimated attenuation factors decrease with increasing frequency. The intrinsic attenuation for CED is among the highest observed elsewhere, which could be due to the highly fractured and fluid-filled carbonates in the upper crust. The scattering and the total S-wave attenuation for CED are close to the average values obtained in other studies performed worldwide. In particular, good agreement of frequency dependence of total attenuation in CED and in the regions that contributed most strong-motion records for ground motion prediction equations used in PSHA in Croatia indicates that those were well chosen and applicable to this area as far as their attenuation properties are concerned.
Takemura, Shunsuke; Furumura, Takashi; Maeda, Takuto
2015-04-01
Based on 3-D finite difference method simulations of seismic wave propagation, we examined the processes by which the complex, scattered high-frequency (f > 1 Hz) seismic wavefield during crustal earthquakes is developed due to heterogeneous structure, which includes small-scale velocity inhomogeneity in subsurface structure and irregular surface topography on the surface, and compared with observations from dense seismic networks in southwestern Japan. The simulations showed the process by which seismic wave scattering in the heterogeneous structure develops long-duration coda waves and distorts the P-wave polarization and apparent S-wave radiation pattern. The simulations revealed that scattering due to irregular topography is significant only near the station and thus the topographic scattering effects do not accumulate as seismic waves propagate over long distances. On the other hand, scattering due to velocity inhomogeneity in the subsurface structure distorts the seismic wavefield gradually as seismic waves propagate. The composite model, including both irregular topography and velocity inhomogeneity, showed the combined effects. Furthermore, by introducing irregular topography, the effects of seismic wave scattering on both body and coda waves were stronger than in the model with velocity inhomogeneity alone. Therefore, to model the high-frequency seismic wavefield, both topography and velocity inhomogeneity in the subsurface structure should be taken into account in the simulation model. By comparing observations with the simulations including topography, we determined that the most preferable small-scale velocity heterogeneity model for southwestern Japan is characterized by the von Kármán power spectral density function with correlation distance a = 5 km, rms value of fluctuation ɛ = 0.07 and decay order κ = 0.5. We also demonstrated that the relative contribution of scattering due to the topography of southwestern Japan is approximately 12 per cent.
Low frequency Raman scattering for high resolution low temperature optical fiber sensors
Rabia, M. K.; Jurdyc, A.-M.; Le Brusq, J.; Champagnon, B.; Vouagner, D.
2017-09-01
Raman distributed optical fiber temperature sensors are based on the intensity ratio of the anti-Stokes to the Stokes Raman band at 440 cm-1 of silica. In this paper we predict that the sensitivity of the Raman measurements for low temperatures can be improved by considering the Boson peak in the low frequency Raman scattering domain at 60 cm-1. In this way Raman temperature sensors can be performed down to cryogenic temperatures. It is further shown that the Boson peak is less dependent than the 440 cm-1 band to the polarization of light. For the usual excitation at 1550 nm the anti-Stokes Boson peak at 1536 nm is in the low loss transmission window of the silica fibers.
Origins of high-frequency scattered waves near PKKP from large aperture seismic array data
Earle, P.S.
2002-01-01
This article identifies the likely origin of 1-Hz scattered waves in the vicinity of PKKP by comparing measurements of slowness and onset time to ray-theoretical predictions. The measurements are obtained from slant stacks of Large Aperture Seismic Array (LASA) data from 36 earthquakes and six explosions in the range 30??-116??. Three types of scattered waves explain the main features seen in the stacks, including: P scattered to PKP near the Earth's surface (P.PKP), PKKP scattered near its core-mantle-boundary (CMB) reflection point (PK.KP), and SKKP scattered near its CMB reflection point (SK.KP). The LASA stacks image the amplitude and slowness variations of the scattered waves with time. They also show where these waves can be detected and where they are free from contaminating arrivals. SK.KP waves rise above the noise approximately 100 sec before the onset time of the main SKKP arrival near 113??. Observations of PK.KP span 30??-100??. However, at distances greater than 50?? they suffer from P.PKP contamination. At distances less than 40?? the PK.KP last for about 280 sec. This is approximately 130 sec longer than the maximum ray-theoretical prediction for waves scattered at the CMB, indicating a possible combination of near-surface scattering and contributions from the overlying mantle.
Baldauf, John; Lee, Shung-Wu; Lin, Luke; Jeng, Shyh-Kang; Scarborough, Steven M.; Yu, C. L.
1991-09-01
A general method for calculating the radar cross section (RCS) from a three-dimensional target is described. The target is first constructed by using a solid-geometry-modeling computer-aided design (CAD) package. Following the shooting and bouncing ray (SBR) method, a very dense grid of rays is launched from the incident direction toward the target. Each ray is traced according to the geometrical optics theory including the effect of ray tube divergence, polarization, and material reflection coefficient. At the point where the ray exits the target, a physical optics-type integration is performed to obtain the scattered far fields. This method is tested using several simple examples involving interaction among plates, cylinders, and spheres. The theoretical results are generally in good agreement with measured data.
High frequency material issues in scattering of sound by objects in water
Dudley, Christopher
Ray theoretic models were shown to predict scattering enhancements from laboratory scale cylindrical targets in water. Synthetic aperture sonar and acoustical holographic images were constructed from bistatic scattering. Targets of increasing complexity from material properties were investigated. Models range from simple ray optic style to corrections for transversely isotropic materials. To correctly model the complexity of anisotropic material such as fiberglass, the five independent elastic constants and the density were measured. In all of the cylindrical shells and solid targets, enhancements are observable for ka values ranging from 9 to 40 where k is the wavenumber and a is the cylinder radius. The simpler targets consist of a low sound speed fluid within a thin plastic or fiberglass shell (11 image features existed from longitudinal as well as shear wave propagation within the polystyrene. A model including shear and longitudinal wave components showed good agrement with experiments with respect to timing and length of features for RexoliteRTM. Fiberglass is the most complex due to the anisotropic symmetry of the material. The slowness matrix allowed for modeling of timing aspects of the solid fiberglass cylinder. For a flat polystyrene half-space there is predicted to be a prominent enhancement of the acoustic reflection for an angle of incidence near 40°. Measurements showed the existence of a related peak in the reflection from solid Rexolite cylinders with ka near 9. Related peaks in the reflection from coated cylinders were observed. The properties of sound transmitted by a stainless steel plate in water was investigated. The relevant S2b leaky Lamb waves have been previously demonstrated on spherical shells [Kaduchak et al., J. Acoust. Soc. Am. 96, 3704 (1994)]. Directional properties of guided waves excited on a stainless steel plate in water were observed. Guided waves could be excited on the plate having group and phase velocities oppositely
Liu, Guosheng; Seo, Eun-Kyoung
2013-02-01
has been long believed that the dominant microwave signature of snowfall over land is the brightness temperature decrease caused by ice scattering. However, our analysis of multiyear satellite data revealed that on most of occasions, brightness temperatures are rather higher under snowfall than nonsnowfall conditions, likely due to the emission by cloud liquid water. This brightness temperature increase masks the scattering signature and complicates the snowfall detection problem. In this study, we propose a statistical method for snowfall detection, which is developed by using CloudSat radar to train high-frequency passive microwave observations. To capture the major variations of the brightness temperatures and reduce the dimensionality of independent variables, the detection algorithm is designed to use the information contained in the first three principal components resulted from Empirical Orthogonal Function (EOF) analysis, which capture ~99% of the total variances of brightness temperatures. Given a multichannel microwave observation, the algorithm first transforms the brightness temperature vector into EOF space and then retrieves a probability of snowfall by using the CloudSat radar-trained look-up table. Validation has been carried out by case studies and averaged horizontal snowfall fraction maps. The result indicated that the algorithm has clear skills in identifying snowfall areas even over mountainous regions.
Low Frequency Scattering Resonance Wave in Strong Heterogeneity
Liu, Yinbin
2015-01-01
Multiple scattering of wave in strong heterogeneity can cause resonance-like wave phenomenon where signal exhibits low frequency, high intensity, and slowly propagating velocity. For example, long period event in volcanic seismology and surface plasmon wave and quantum Hall effect in wave-particle interactions. Collective behaviour in a many-body system is usually thought to be the source for generating the anomaly. However, the detail physical mechanism is not fully understood. Here I show by wave field modeling for microscopic bubble cloud model and 1D heterogeneity that the anomaly is related to low frequency scattering resonance happened in transient regime. This low frequency resonance is a kind of wave coherent scattering enhancement phenomenon in strongly-scattered small-scale heterogeneity. Its resonance frequency is inversely proportional to heterogeneous scale and contrast and will further shift toward lower frequency with random heterogeneous scale and velocity fluctuations. Low frequency scatterin...
Optimizing optical Bragg scattering for single-photon frequency conversion
Lefrancois, Simon; Eggleton, Benjamin J
2014-01-01
We develop a systematic theory for optimising single-photon frequency conversion using optical Bragg scattering. The efficiency and phase-matching conditions for the desired Bragg scattering conversion as well as spurious scattering and modulation instability are identified. We find that third-order dispersion can suppress unwanted processes, while dispersion above the fourth order limits the maximum conversion efficiency. We apply the optimisation conditions to frequency conversion in highly nonlinear fiber, silicon nitride waveguides and silicon nanowires. Efficient conversion is confirmed using full numerical simulations. These design rules will assist the development of efficient quantum frequency conversion between multicolour single photon sources for integration in complex quantum networks.
Meteor forward scattering at multiple frequencies
Nedeljkovic, Sasa
2006-08-01
Meteor forward scattering is a well known method of detecting meteors using a radio telescope to receive signals from distant transmitters scattered from a meteor trail. The traditional way of performing the meteor forward scattering is to tune the receiver to some particular frequency to match a distant transmitter and wait for reflected signals. In this paper I will show how new technologies can be used to make a simpler digital radio telescope capable of analyzing broadband spectra from 0 to 250 MHz. Such spectra contain information about several reflections on a single meteor, which can be enough to calculate the meteor's kinetic parameters.
Shcherbakov, Alexandre S; Arellanes, Adan Omar
2017-04-20
We present a principally new acousto-optical cell providing an advanced wideband spectrum analysis of ultra-high frequency radio-wave signals. For the first time, we apply a recently developed approach with the tilt angle to a one-phonon non-collinear anomalous light scattering. In contrast to earlier cases, now one can exploit a regime with the fixed optical wavelength for processing a great number of acoustic frequencies simultaneously in the linear regime. The chosen rutile-crystal combines a moderate acoustic velocity with low acoustic attenuation and allows us wide-band data processing within GHz-frequency acoustic waves. We have created and experimentally tested a 6-cm aperture rutile-made acousto-optical cell providing the central frequency 2.0 GHz, frequency bandwidth ∼0.52 GHz with the frequency resolution about 68.3 kHz, and ∼7620 resolvable spots. A similar cell permits designing an advanced ultra-high-frequency arm within a recently developed multi-band radio-wave acousto-optical spectrometer for astrophysical studies. This spectrometer is intended to operate with a few parallel optical arms for processing the multi-frequency data flows within astrophysical observations. Keeping all the instrument's advantages of the previous schematic arrangement, now one can create the highest-frequency arm using the developed rutile-based acousto-optical cell. It permits optimizing the performances inherent in that arm via regulation of both the central frequency and the frequency bandwidth for spectrum analysis.
Imaging scattering orientation with spatial frequency domain imaging.
Konecky, Soren D; Rice, Tyler; Durkin, Anthony J; Tromberg, Bruce J
2011-12-01
Optical imaging techniques based on multiple light scattering generally have poor sensitivity to the orientation and direction of microscopic light scattering structures. In order to address this limitation, we introduce a spatial frequency domain method for imaging contrast from oriented scattering structures by measuring the angular-dependence of structured light reflectance. The measurement is made by projecting sinusoidal patterns of light intensity on a sample, and measuring the degree to which the patterns are blurred as a function of the projection angle. We derive a spatial Fourier domain solution to an anisotropic diffusion model. This solution predicts the effects of bulk scattering orientation on the amplitude and phase of the projected patterns. We introduce a new contrast function based on a scattering orientation index (SOI) which is sensitive to the degree to which light scattering is directionally dependent. We validate the technique using tissue simulating phantoms, and ex vivo samples of muscle and brain. Our results show that SOI is independent of the overall amount of bulk light scattering and absorption, and that isotropic versus oriented scattering structures can be clearly distinguished. We determine the orientation of subsurface microscopic scattering structures located up to 600 μm beneath highly scattering (μ(') (s) = 1.5 mm(-1)) material.
Forward scattering of meteors at multiple frequencies
Nedeljkovic, S.; Netterfield, C. B.
2006-05-01
Forward scattering of meteors is a method of meteor detection using a radio receiver to detect signals coming from the transmitters not in line-of-sight. When a meteoroid enters the atmosphere an ionized trail which can reflect radio waves is created. If the meteor, the transmitter and the receiver are in "good" geometrical alignment such that coherent scattering is possible, the receiver will be able to detect a signal reflected from the meteor. A digital radio spectrometer working between 50 and 150MHz and connected to a small wide-frequency, wide-beam antenna can be used as a detector. Its spectral resolution is better than 50kHz and able to resolve individual FM radio and TV stations. In this paper we shall give an overview of the apparatus used to detect meteors at FM frequencies. We will also explain how we can extract the kinetic parameters of the meteoroid. Some preliminary results will be presented.
Analysis of High-Frequency Broadband Acoustic Scattering from Non-Linear Internal Waves During SW06
2009-09-30
and Love, 1996; Nero et al., 1998; Love et al., 2004). The broadband system developed for this project was used to measure high-frequency broadband...2550. Love, R. H., Fisher, R. A., Wilson, M. A., and Nero , R.W. (2004). “Unusual swimbladder behavior of fish in the Cariaco Trench,” Deep-Sea...strained by internal solitary waves propagating shoreward over the continental shelf,” J. Phys. Oceanogr. 33, 2093-2112. Nero , R.W., Thompson, C.H., and
Takemura, Shunsuke; Furumura, Takashi
2013-04-01
We studied the scattering properties of high-frequency seismic waves due to the distribution of small-scale velocity fluctuations in the crust and upper mantle beneath Japan based on an analysis of three-component short-period seismograms and comparison with finite difference method (FDM) simulation of seismic wave propagation using various stochastic random velocity fluctuation models. Using a large number of dense High-Sensitivity Seismograph network waveform data of 310 shallow crustal earthquakes, we examined the P-wave energy partition of transverse component (PEPT), which is caused by scattering of the seismic wave in heterogeneous structure, as a function of frequency and hypocentral distances. At distance of less than D = 150 km, the PEPT increases with increasing frequency and is approximately constant in the range of from D = 50 to 150 km. The PEPT was found to increase suddenly at a distance of over D = 150 km and was larger in the high-frequency band (f > 4 Hz). Therefore, strong scattering of P wave may occur around the propagation path (upper crust, lower crust and around Moho discontinuity) of the P-wave first arrival phase at distances of larger than D = 150 km. We also found a regional difference in the PEPT value, whereby the PEPT value is large at the backarc side of northeastern Japan compared with southwestern Japan and the forearc side of northeastern Japan. These PEPT results, which were derived from shallow earthquakes, indicate that the shallow structure of heterogeneity at the backarc side of northeastern Japan is stronger and more complex compared with other areas. These hypotheses, that is, the depth and regional change of small-scale velocity fluctuations, are examined by 3-D FDM simulation using various heterogeneous structure models. By comparing the observed feature of the PEPT with simulation results, we found that strong seismic wave scattering occurs in the lower crust due to relatively higher velocity and stronger heterogeneities
Hann, Raiford E.
1991-01-01
An equivalent circuit model (ECM) approach is used to predict the scattering behavior of temperature-activated, electrically lossy dielectric layers. The total electrical response of the dielectric (relaxation + conductive) is given by the ECM and used in combination with transmission line theory to compute reflectance spectra for a Dallenbach layer configuration. The effects of thermally-activated relaxation processes on the scattering properties is discussed. Also, the effect of relaxation and conduction activation energy on the electrical properties of the dielectric is described.
2010-05-27
1996; Nero et al, 1998; Love et al, 2004). The broadband system developed for this project was used to measure high-frequency broadband acoustic...Wilson, M. A., and Nero , R.W. (2004). "Unusual swimbladder behavior offish in the Cariaco Trench," Deep-Sea Research 151(1): 1-16. Lundgren B., and...propagating shoreward over the continental shelf," J. Phys. Oceanogr. 33, 2093-2112. Nero , R.W., Thompson, C.H., and Love, R.H. (1998). "Low-frequency
Micro-Doppler Frequency Comb Generation by Axially Rotating Scatterers
Kozlov, Vitali; Yankelevich, Yefim; Ginzburg, Pavel
2016-01-01
Electromagnetic scattering in accelerating reference frames inspires a variety of phenomena, requiring employment of general relativity for their description. While the quasi-stationary field analysis could be applied to slowly-accelerating bodies as a first-order approximation, the scattering problem remains fundamentally nonlinear in boundary conditions, giving rise to multiple frequency generation (micro-Doppler shifts). Here a frequency comb, generated by an axially rotating subwavelength (cm-range) wire and split ring resonator (SRR), is analyzed theoretically and observed experimentally by illuminating the system with a 2GHz carrier wave. Highly accurate lock in detection scheme enables factorization of the carrier and observation of more than ten peaks in a comb. The Hallen integral equation is employed for deriving the currents induced on the scatterer at rest and a set of coordinate transformations, connecting laboratory and rotating frames, is applied in order to predict the spectral positions and a...
Baldauf, John; Lee, Shung-Wu; Lin, Luke; Jeng, Shyh-Kang; Scarborough, Steven M.; Yu, C. L.
1991-01-01
A general method for calculating the radar cross section (RCS) from a three-dimensional target is described. The target is first constructed by using a solid-geometry-modeling computer-aided design (CAD) package. Following the shooting and bouncing ray (SBR) method, a very dense grid of rays is launched from the incident direction toward the target. Each ray is traced according to the geometrical optics theory including the effect of ray tube divergence, polarization, and material reflection coefficient. At the point where the ray exits the target, a physical optics-type integration is performed to obtain the scattered far fields. This method is tested using several simple examples involving interaction among plates, cylinders, and spheres. The theoretical results are generally in good agreement with measured data.
Buscombe, D.; Grams, P. E.; Kaplinski, M. A.
2014-12-01
In this, the second of a pair of papers on the statistical signatures of riverbed sediment in high-frequency acoustic backscatter, spatially explicit maps of the stochastic geometries (length and amplitude scales) of backscatter are related to patches of riverbed surfaces composed of known sediment types, as determined by georeferenced underwater video observations. Statistics of backscatter magnitudes alone are found to be poor discriminators between sediment types. However, the variance of the power spectrum and the intercept and slope from a power law spectral form (termed the spectral strength and exponent, respectively) successfully discriminate between sediment types. A decision tree approach was able to classify spatially heterogeneous patches of homogeneous sands, gravels (and sand-gravel mixtures), and cobbles/boulders with 95, 88, and 91% accuracy, respectively. Application to sites outside the calibration and surveys made at calibration sites at different times were plausible based on observations from underwater video. Analysis of decision trees built with different training data sets suggested that the spectral exponent was consistently the most important variable in the classification. In the absence of theory concerning how spatially variable sediment surfaces scatter high-frequency sound, the primary advantage of this data-driven approach to classify bed sediment over alternatives is that spectral methods have well-understood properties and make no assumptions about the distributional form of the fluctuating component of backscatter over small spatial scales.
Buscombe, Daniel D.; Grams, Paul E.; Kaplinski, Matt A.
2014-01-01
In this, the second of a pair of papers on the statistical signatures of riverbed sediment in high-frequency acoustic backscatter, spatially explicit maps of the stochastic geometries (length- and amplitude-scales) of backscatter are related to patches of riverbed surfaces composed of known sediment types, as determined by geo-referenced underwater video observations. Statistics of backscatter magnitudes alone are found to be poor discriminators between sediment types. However, the variance of the power spectrum, and the intercept and slope from a power-law spectral form (termed the spectral strength and exponent, respectively) successfully discriminate between sediment types. A decision-tree approach was able to classify spatially heterogeneous patches of homogeneous sands, gravels (and sand-gravel mixtures), and cobbles/boulders with 95, 88, and 91% accuracy, respectively. Application to sites outside the calibration, and surveys made at calibration sites at different times, were plausible based on observations from underwater video. Analysis of decision trees built with different training data sets suggested that the spectral exponent was consistently the most important variable in the classification. In the absence of theory concerning how spatially variable sediment surfaces scatter high-frequency sound, the primary advantage of this data-driven approach to classify bed sediment over alternatives is that spectral methods have well understood properties and make no assumptions about the distributional form of the fluctuating component of backscatter over small spatial scales.
Micro-Doppler frequency comb generation by rotating wire scatterers
Kozlov, V.; Filonov, D.; Yankelevich, Y.; Ginzburg, P.
2017-03-01
Electromagnetic scattering in accelerating reference frames inspires a variety of phenomena, requiring employment of general relativity for their description. While the 'quasi-stationary field' analysis could be applied to slowly-accelerating bodies as a first-order approximation, the scattering problem remains fundamentally nonlinear in boundary conditions, giving rise to multiple frequency generation (micro-Doppler shifts). Here a frequency comb, generated by an axially rotating subwavelength (cm-range) wires is analyzed theoretically and observed experimentally by illuminating the system with a 2 GHz carrier wave. Highly accurate 'lock in' detection scheme enables factorization of the carrier and observation of multiple peaks in a comb. The Hallen integral equation is employed for deriving the currents induced on the scatterer and a set of coordinate transformations, connecting laboratory and rotating frames, is applied in order to make analytical predictions of the spectral positions and amplitudes of the frequency comb peaks. Numeric simulations of the theoretic framework reveal the dependence of the micro-Doppler peaks on the wire's length and its axis of rotation. Unique spectral signature of micro-Doppler shifts could enable resolving internal structures of scatterers and mapping their accelerations in space, which is valuable for a variety of applications spanning from targets identification to stellar radiometry.
High-Frequency Seafloor Acoustics
Jackson, Darrell R
2007-01-01
High-Frequency Seafloor Acoustics is the first book in a new series sponsored by the Office of Naval Research on the latest research in underwater acoustics. This exciting new title provides ready access to experimental data, theory, and models relevant to high-frequency seafloor acoustics and will be of interest to sonar engineers and researchers working in underwater acoustics. The physical characteristics of the seafloor affecting acoustic propagation and scattering are covered, including physical and geoacoustic properties and surface roughness. Current theories for acoustic propagation in sediments are presented along with corresponding models for reflection, scattering, and seafloor penetration. The main text is backed up by an extensive bibliography and technical appendices.
The frequency dependence of scattering imprints on pulsar observations
Geyer, Marisa
2016-01-01
Observations of pulsars across the radio spectrum are revealing a dependence of the characteristic scattering time ($\\tau$) on frequency, which is more complex than the simple power law with a theoretically predicted power law index. In this paper we investigate these effects using simulated pulsar data at frequencies below 300 MHz. We investigate different scattering mechanisms, namely isotropic and anisotropic scattering, by thin screens along the line of sight, and the particular frequency dependent impact on pulsar profiles and scattering time scales of each. We also consider how the screen shape, location and offset along the line of sight lead to specific observable effects. We evaluate how well forward fitting techniques perform in determining $\\tau$. We investigate the systematic errors in $\\tau$ associated with the use of an incorrect fitting method and with the determination of an off-pulse baseline. Our simulations provide examples of average pulse profiles at various frequencies. Using these we co...
Microwave Radiometer - high frequency
Oak Ridge National Laboratory — The Microwave Radiometer-High Frequency (MWRHF) provides time-series measurements of brightness temperatures from two channels centered at 90 and 150 GHz. These two...
Quantum noise frequency correlations of multiply scattered light
DEFF Research Database (Denmark)
Lodahl, Peter
2006-01-01
Frequency correlations in multiply scattered light that are present in quantum fluctuations are investigated. The speckle correlations for quantum and classical noise are compared and are found to depend markedly differently on optical frequency, which was confirmed in a recent experiment....... Furthermore, novel mesoscopic correlations are predicted that depend on the photon statistics of the incoming light....
High frequency electromagnetic dosimetry
Sánchez-Hernández, David A
2009-01-01
Along with the growth of RF and microwave technology applications, there is a mounting concern about the possible adverse effects over human health from electromagnetic radiation. Addressing this issue and putting it into perspective, this groundbreaking resource provides critical details on the latest advances in high frequency electromagnetic dosimetry.
Optimization of Scatterer Concentration in High-Gain Scattering Media
Institute of Scientific and Technical Information of China (English)
ZHU Jiu-Gao; ZHU He-Yuan; SUN Die-Chi; DU Ge-Guo; LI Fu-Ming
2001-01-01
We report the scatterer concentration-dependent behaviour of laser action in high-gain scattering media. Amodified model of a random laser is proposed to explain the experimental results in good agreement. We mayuse this modified model to design and optimize the random laser system. A further detailed model is needed toquantitatively analyse the far-field distribution of random laser action.
Energy Technology Data Exchange (ETDEWEB)
Ding, W. X., E-mail: wding@ucla.edu; Lin, L.; Brower, D. L. [Department of Physics and Astronomy, University of California Los Angeles, Los Angeles, CA 90095 (United States); Duff, J. R. [Department of Physics, University of Wisconsin-Madison, Wisconsin 53706 (United States)
2014-11-15
Magnetic fluctuation-induced transport driven by global tearing modes has been measured by Faraday-effect polarimetry and interferometry (phase measurements) in the MST reversed field pinch. However, the role of small-scale broadband magnetic and density turbulence in transport remains unknown. In order to investigate broadband magnetic turbulence, we plan to upgrade the existing detector system by using planar-diode fundamental waveguide mixers optimized for high sensitivity. Initial tests indicate these mixers have ×10 sensitivity improvement compared to currently employed corner-cube Schottky-diode mixers and ×5 lower noise. Compact mixer design will allow us to resolve the wavenumbers up to k ∼ 1–2 cm{sup −1} for beam width w = 1.5 cm and 15 cm{sup −1} for beam width w = 2 mm. The system can also be used to measure the scattered signal (amplitude measurement) induced by both plasma density and magnetic fluctuations.
Ding, W X; Lin, L; Duff, J R; Brower, D L
2014-11-01
Magnetic fluctuation-induced transport driven by global tearing modes has been measured by Faraday-effect polarimetry and interferometry (phase measurements) in the MST reversed field pinch. However, the role of small-scale broadband magnetic and density turbulence in transport remains unknown. In order to investigate broadband magnetic turbulence, we plan to upgrade the existing detector system by using planar-diode fundamental waveguide mixers optimized for high sensitivity. Initial tests indicate these mixers have ×10 sensitivity improvement compared to currently employed corner-cube Schottky-diode mixers and ×5 lower noise. Compact mixer design will allow us to resolve the wavenumbers up to k ∼ 1-2 cm(-1) for beam width w = 1.5 cm and 15 cm(-1) for beam width w = 2 mm. The system can also be used to measure the scattered signal (amplitude measurement) induced by both plasma density and magnetic fluctuations.
Low-frequency scattering from two-dimensional perfect conductors
DEFF Research Database (Denmark)
Hansen, Thorkild; Yaghjian, A.D
1991-01-01
Exact expressions have been obtained for the leading terms in the low-frequency expansions of the far fields scattered from three different types of two-dimensional perfect conductors: a cylinder with finite cross section, a cylindrical bump on an infinite ground plane, and a cylindrical dent...
Polarimetric scattering behavior of materials at terahertz frequencies
DiGiovanni, David Anthony
Terahertz spectroscopic techniques have long been used to characterize the electromagnetic behavior of materials for use in radar, astronomy, and remote sensing applications. Spectroscopic information is valuable, but additional information about materials is present in the polarization of the scattered radiation. This thesis has investigated the polarimetric scattering behavior of various rough dielectric and metallic materials from 100 GHz to 1.55 THz. Common building materials and terrain, such as sand, gravel, soil, concrete, and roofing shingles, were studied. In order to obtain a better understanding of basic rough surface scattering phenomenology in this region of the spectrum, roughened metal and plastic samples were studied as well. The scattering behavior of these materials was studied as a function of incident angle, roughness, frequency, and polarization. Theoretical scattering models were used to compare measured results to theoretical predictions. Good agreement was observed between scattering measurements and theoretical predictions based on the small perturbation theory for the roughened metal surfaces. However, a substantial disagreement was observed for the rough dielectric surfaces and is discussed.
High frequency electromagnetic tomography
Energy Technology Data Exchange (ETDEWEB)
Daily, W.; Ramirez, A.; Ueng, T.; Latorre, R.
1989-09-01
An experiment was conducted in G Tunnel at the Nevada Test Site to evaluate high frequency electromagnetic tomography as a candidate for in situ monitoring of hydrology in the near field of a heater placed in densely welded tuff. Tomographs of 200 MHz electromagnetic permittivity were made for several planes between boreholes. Data were taken before the heater was turned on, during heating and during cooldown of the rockmass. This data is interpreted to yield maps of changes in water content of the rockmass as a function of time. This interpretation is based on laboratory measurement of electromagnetic permittivity as a function of water content for densely welded tuff. 8 refs., 6 figs.
Tragardh, Elin; Schlegel, Todd T.
2006-01-01
The standard ECG is by convention limited to 0.05-150 Hz, but higher frequencies are also present in the ECG signal. With high-resolution technology, it is possible to record and analyze these higher frequencies. The highest amplitudes of the high-frequency components are found within the QRS complex. In past years, the term "high frequency", "high fidelity", and "wideband electrocardiography" have been used by several investigators to refer to the process of recording ECGs with an extended bandwidth of up to 1000 Hz. Several investigators have tried to analyze HF-QRS with the hope that additional features seen in the QRS complex would provide information enhancing the diagnostic value of the ECG. The development of computerized ECG-recording devices that made it possible to record ECG signals with high resolution in both time and amplitude, as well as better possibilities to store and process the signals digitally, offered new methods for analysis. Different techniques to extract the HF-QRS have been described. Several bandwidths and filter types have been applied for the extraction as well as different signal-averaging techniques for noise reduction. There is no standard method for acquiring and quantifying HF-QRS. The physiological mechanisms underlying HF-QRS are still not fully understood. One theory is that HF-QRS are related to the conduction velocity and the fragmentation of the depolarization wave in the myocardium. In a three-dimensional model of the ventricles with a fractal conduction system it was shown that high numbers of splitting branches are associated with HF-QRS. In this experiment, it was also shown that the changes seen in HF-QRS in patients with myocardial ischemia might be due to the slowing of the conduction velocity in the region of ischemia. This mechanism has been tested by Watanabe et al by infusing sodium channel blockers into the left anterior descending artery in dogs. In their study, 60 unipolar ECGs were recorded from the entire
High order Nystrom method for acoustic scattering
Chen, Kun; Yang, Siming; Song, Jiming; Roberts, Ron
2015-03-01
While high frequency approximation methods are widely used to solve flaw scattering in ultrasonic nondestructive evaluation, full wave approaches based on integral equations have great potentials due to their high accuracy. In this work, boundary integral equations for acoustic wave scattering are solved using high order Nyström method. Compared with boundary elements method, it features the coincidence of the samples for interpolation basis and quadrature, which makes the far-field interaction free from numerical integration. The singular integral is dealt with using the Duffy transformation, while efficient singularity subtraction techniques are employed to evaluate the near singular integrals. This approach has the ease to go high order so highly accurate results can be obtained with fewer unknowns and faster convergence, and it is also amenable to incorporate fast algorithms like the multi-level fast multi-pole algorithm. The convergence of the approach for different orders of elements and interpolation basis functions is investigated. Numerical results are shown to validate this approach.
Low frequency seabed scattering at low grazing angles.
Zhou, Ji-Xun; Zhang, Xue-Zhen
2012-04-01
Low-frequency (LF) seabed scattering at low grazing angles (LGA) is almost impossible to directly measure in shallow water (SW), except through inversion from reverberation. The energy flux method for SW reverberation is briefly introduced in this paper. The closed-form expressions of reverberation in an isovelocity waveguide, derived from this method, indicate that in the three-halves law range interval multimode/ray sea bottom scattering with different incident and scattering angles in forming the reverberation may equivalently be represented by the bottom backscattering at a single range-dependent angle. This equivalent relationship is used to derive the bottom backscattering strength (BBS) as a function of angle and frequency. The LF&LGA BBS is derived in a frequency band of 200-2500 Hz and in a grazing angle range of 1.1°-14.0° from reverberation measurements at three sites with sandy bottoms. This is based on three previous works: (1) The closed-form expressions of SW reverberation [Zhou, (Chinese) Acta Acustica 5, 86-99 (1980)]; (2) the effective geo-acoustic model of sandy bottoms that follows the Biot model [Zhou et al., J. Acoust. Soc. Am. 125, 2847-2866 (2009)] and (3) A quality database of wideband reverberation level normalized to source level [Zhou and Zhang, IEEE J. Oceanic Eng. 30, 832-842 (2005)].
High Frequency Oscillatory Ventilation
Directory of Open Access Journals (Sweden)
AC Bryan
1996-01-01
Full Text Available High frequency oscillatory (HFO ventilation using low tidal volume and peak airway pressures is extremely efficient at eliminating carbon dioxide and raising pH in the newborn infant with acute respiratory failure. Improvement in oxygenation requires a strategy of sustained or repetitive inflations to 25 to 30 cm H2O in order to place the lung on the deflation limb of the pressure-volume curve. This strategy has also been shown to decrease the amount of secondary lung injury in animal models. Experience of the use of HFO ventilation as a rescue therapy as well as several published controlled trials have shown improved outcomes and a decrease in the use of extracorporeal membrane oxygenation when it has been used in newborns.
Scattering of radio frequency waves by turbulence in fusion plasmas
Ram, Abhay K.
2016-10-01
In tokamak fusion plasmas, coherent fluctuations in the form of blobs or filaments and incoherent fluctuations due to turbulence are routinely observed in the scrape-off layer. Radio frequency (RF) electromagnetic waves, excited by antenna structures placed near the wall of a tokamak, have to propagate through the scrape-off layer before reaching the core of the plasma. While the effect of fluctuations on RF waves has not been quantified experimentally, there are telltale signs, arising from differences between results from simulations and from experiments, that fluctuations can modify the spectrum of RF waves. Any effect on RF waves in the scrape-off layer can have important experimental consequences. For example, electron cyclotron waves are expected to stabilize the deleterious neoclassical tearing mode (NTM) in ITER. Spectral and polarization changes due to scattering will modify the spatial location and profile of the current driven by the RF waves, thereby affecting the control of NTMs. Pioneering theoretical studies and complementary computer simulations have been pursued to elucidate the impact of fluctuations on RF waves. From the full complement of Maxwell's equations for cold, magnetized plasmas, it is shown that the Poynting flux in the wake of filaments develops spatial structure due to diffraction and shadowing. The uniformity of power flow into the plasma is affected by side-scattering, modifications to the wave spectrum, and coupling to plasma waves other than the incident RF wave. The Snell's law and the Fresnel equations have been reformulated within the context of magnetized plasmas. They are distinctly different from their counterparts in scalar dielectric media, and reveal new and important physical insight into the scattering of RF waves. The Snell's law and Fresnel equations are the basis for the Kirchhoff approximation necessary to determine properties of the scattered waves. Furthermore, this theory is also relevant for studying back-scattering
Stefan, V. Alexander
2014-10-01
A novel method for alpha particle diagnostics is proposed. The theory of stimulated Raman scattering, SRS, of the fast wave and ion Bernstein mode, IBM, turbulence in multi-ion species plasmas, (Stefan University Press, La Jolla, CA, 2008). is utilized for the diagnostics of fast ions, (4)He (+2), in ITER plasmas. Nonlinear Landau damping of the IBM on fast ions near the plasma edge leads to the space-time changes in the turbulence level, (inverse alpha particle channeling). The space-time monitoring of the IBM turbulence via the SRS techniques may prove efficient for the real time study of the fast ion velocity distribution function, spatial distribution, and transport. Supported by Nikola Tesla Labs., La Jolla, CA 92037.
Bourlier, C.; Berginc, G.
2004-07-01
This second part presents illustrative examples of the model developed in the companion paper, which is based on the first- and second-order optics approximation. The surface is assumed to be Gaussian and the correlation height is chosen as anisotropic Gaussian. The incoherent scattering coefficient is computed for a height rms range from 0.5lgr to 1lgr (where lgr is the electromagnetic wavelength), for a slope rms range from 0.5 to 1 and for an incidence angle range from 0 to 70°. In addition, simulations are presented for an anisotropic Gaussian surface and when the receiver is not located in the plane of incidence. For a metallic and dielectric isotropic Gaussian surfaces, the cross- and co-polarizations are also compared with a numerical approach obtained from the forward-backward method with a novel spectral acceleration algorithm developed by Torrungrueng and Johnson (2001, JOSA A 18).
Low-frequency Raman scattering in alkali tellurite glasses
Indian Academy of Sciences (India)
Angelos G Kalampounias
2008-10-01
Raman scattering has been employed to study the alkali-cation size dependence and the polarization characteristics of the low-frequency modes for the glass-forming tellurite mixtures, 0.1M2O–0.9TeO2 (M = Na, K, Rb and Cs). The analysis has shown that the Raman coupling coefficient alters by varying the type of the alkali cation. The addition of alkali modifier in the tellurite network leads to the conversion of the TeO4 units to TeO3 units with a varying number of non-bridging oxygen atoms. Emphasis has also been given to the lowfrequency modes and particular points related to the low-frequency Raman phenomenology are discussed in view of the experimental findings.
Raman forward scattering of high-intensity chirped laser pulses
Energy Technology Data Exchange (ETDEWEB)
Schroeder, C.B.; Esarey, E.; Shadwick, B.A.; Leemans, W.P.
2002-06-23
Raman forward scattering of a high-intensity, short-duration, frequency-chirped laser pulse propagating in an underdense plasma is examined. The growth of the direct forward scattered light is calculated for a laser pulse with a linear frequency chirp in various spatio-temporal regimes. This includes a previously undescribed regime of strongly-coupled four-wave nonresonant interaction, which is important for relativistic laser intensities. In all regimes of forward scattering, it is shown that the growth rate increases (decreases) for positive (negative) frequency chirp. The effect of chirp on the growth rate is relatively minor, i.e., a few percent chirp yields few percent changes in the growth rates. Relation of these results to recent experiments is discussed.
Panigrahi, Swapnesh; Ramachandran, Hema; Alouini, Mehdi
2016-01-01
The efficiency of using intensity modulated light for estimation of scattering properties of a turbid medium and for ballistic photon discrimination is theoretically quantified in this article. Using the diffusion model for modulated photon transport and considering a noisy quadrature demodulation scheme, the minimum-variance bounds on estimation of parameters of interest are analytically derived and analyzed. The existence of a variance-minimizing optimal modulation frequency is shown and its evolution with the properties of the intervening medium is derived and studied. Furthermore, a metric is defined to quantify the efficiency of ballistic photon filtering which may be sought when imaging through turbid media. The analytical derivation of this metric shows that the minimum modulation frequency required to attain significant ballistic discrimination depends only on the reduced scattering coefficient of the medium in a linear fashion for a highly scattering medium.
Panigrahi, Swapnesh; Fade, Julien; Ramachandran, Hema; Alouini, Mehdi
2016-07-11
The efficiency of using intensity modulated light for the estimation of scattering properties of a turbid medium and for ballistic photon discrimination is theoretically quantified in this article. Using the diffusion model for modulated photon transport and considering a noisy quadrature demodulation scheme, the minimum-variance bounds on estimation of parameters of interest are analytically derived and analyzed. The existence of a variance-minimizing optimal modulation frequency is shown and its evolution with the properties of the intervening medium is derived and studied. Furthermore, a metric is defined to quantify the efficiency of ballistic photon filtering which may be sought when imaging through turbid media. The analytical derivation of this metric shows that the minimum modulation frequency required to attain significant ballistic discrimination depends only on the reduced scattering coefficient of the medium in a linear fashion for a highly scattering medium.
Suppression of the low spatial frequency effects of scattered radiation in digital radiography
Kotre, C. J.
2016-01-01
One of the deleterious effects of scattered radiation in the digital radiograph is to add a slowly varying background to the image. This can reduce the ability of the observer to discern low contrast signals if the background gradient over a signal feature prevents the use of a small enough display window to make the signal visible. This paper presents an image processing scheme for suppressing the low spatial frequency effects of scattered radiation in digital radiography and demonstrates it on a range of clinical and phantom images. The approach relies on the approximate separation of high atomic number bony features from the low atomic number soft tissue background, and the use of forward convolution with a scatter kernel to produce an estimate of the scatter distribution arising from the soft tissue background. This is then scaled by an estimate of the soft tissue scatter fraction and subtracted from the original image to produce the final scatter-suppressed image. The implementation employs many approximations in order to make use of information that is readily available in the image headers of current x-ray imaging systems. The performance of the image processing scheme is demonstrated on phantom and clinical images. It is argued that clinical application of the approach could employ a user-controlled scatter subtraction step that would reduce any risk of misinterpretation of the processed image.
Techniques in high pressure neutron scattering
Klotz, Stefan
2013-01-01
Drawing on the author's practical work from the last 20 years, Techniques in High Pressure Neutron Scattering is one of the first books to gather recent methods that allow neutron scattering well beyond 10 GPa. The author shows how neutron scattering has to be adapted to the pressure range and type of measurement.Suitable for both newcomers and experienced high pressure scientists and engineers, the book describes various solutions spanning two to three orders of magnitude in pressure that have emerged in the past three decades. Many engineering concepts are illustrated through examples of rea
High Efficiency Low Scatter Echelle Grating Project
National Aeronautics and Space Administration — A high efficiency low scatter echelle grating will be developed using a novel technique of multiple diamond shaving cuts. The grating will have mirror surfaces on...
High frequency nanotube oscillator
Peng, Haibing [Houston, TX; Zettl, Alexander K [Kensington, TX
2012-02-21
A tunable nanostructure such as a nanotube is used to make an electromechanical oscillator. The mechanically oscillating nanotube can be provided with inertial clamps in the form of metal beads. The metal beads serve to clamp the nanotube so that the fundamental resonance frequency is in the microwave range, i.e., greater than at least 1 GHz, and up to 4 GHz and beyond. An electric current can be run through the nanotube to cause the metal beads to move along the nanotube and changing the length of the intervening nanotube segments. The oscillator can operate at ambient temperature and in air without significant loss of resonance quality. The nanotube is can be fabricated in a semiconductor style process and the device can be provided with source, drain, and gate electrodes, which may be connected to appropriate circuitry for driving and measuring the oscillation. Novel driving and measuring circuits are also disclosed.
Institute of Scientific and Technical Information of China (English)
刘绍璞; 罗红群; 李念兵; 刘忠芳
2003-01-01
Binding of heparin with methylene blue(MB) in pH5.7 Britton-Robinson buffer can result in a significant enhancement of frequency doubling scattering (FDS) and second-order scattering (SOS).Their maximum scattering wavelengths(λmax) appear at 350nm for FDS and 700nm for SOS,respectively.The optimum conditions of the reaction,the influencing factors and the relationship between the two scattering intensities and the concentration of heparin have been investigated.The new methods for the determination of trace amounts of heparin bassed on the FDS and SOS methods have been developed,which exhibit high sensitivities.The detection limits of heparin are 4.36ng/mL for the FDS method and 3.55ng/mL for the SOS method,respectively.Both of the methods have fairly godd selectivity and ware applied to the determination of heparin in sodium heparinate injection samples with satisfactory results.Moreover,the relative mechamisms have also been discussed.
Stimulated low frequency Raman scattering in cupric oxide nanoparticles water suspension
Averyushkin, A. S.; Baranov, A. N.; Bulychev, N. A.; Kazaryan, M. A.; Kudryavtseva, A. D.; Strokov, M. A.; Tcherniega, N. V.; Zemskov, K. I.
2017-04-01
Cupric oxide nanoparticles with average size of 213.2 nm, were synthesized in acoustoplasma discharge for investigating their vibrational properties. The low-frequency acoustic mode in cupric oxide (CuO) nanoparticles has been studied by stimulated low-frequency Raman scattering (SLFRS). SLFRS conversion efficiency, threshold and frequency shift of the scattered light are measured.
Institute of Scientific and Technical Information of China (English)
XI Cun-Xian; LIU Zhong-Fang; HU Xiao-Li; LIU Shao-Pu; DUAN Hui
2008-01-01
In pH 4.9 Britton-Robinson buffer solution,methotrexate (MTX) reacted with thallium(III) to form a 3:1 che late.This resulted in great enhancement of second-order scattering (SOS) spectra and frequency doubling scattering (FDS) spectra and appearance of new SOS and FDS spectra.Their maximum wavelengths were located at 520 and 390 nm,respectively.The increments of scattering intensities (ΔI) were directly proportional to the concentrations of MTX in the ranges of 0.022--2.0 μg·mL-1 (SOS method) and 0.008--2.5μg·mL-1 (FDS method).The methods exhibited high sensitivities.The detection limits for MTX were 7.4 ng·mL-1 (SOS method) and 2.3 ng.mL-1 (FDS method),respectively.The optimum conditions of the reaction,the influencing factors and the effects of coexisting substances were investigated.A highly sensitive,simple and fast method for the determination of MTX has been developed.The method can be applied satisfactorily to the determination of MTX in human serum samples.In this work,the charge distribution of MTX was calculated by a CNDO quantum chemistry method.In addition,the reaction mechanism was discussed.
High-frequency magnetic components
Kazimierczuk, Marian K
2009-01-01
If you are looking for a complete study of the fundamental concepts in magnetic theory, read this book. No other textbook covers magnetic components of inductors and transformers for high-frequency applications in detail. This unique text examines design techniques of the major types of inductors and transformers used for a wide variety of high-frequency applications including switching-mode power supplies (SMPS) and resonant circuits. It describes skin effect and proximity effect in detail to provide you with a sound understanding of high-frequency phenomena. As well as this, you will disco
Sparse frequencies data inversion and the role of multi-scattered energy
Alkhalifah, Tariq Ali
2017-05-26
In trying to extract a broad spectrum of model wavenumbers from the data, necessary to build a plausible model of the Earth, we are, in theory, bounded at the high end by the diffraction resolution limit, which is proportional to the highest usable frequency in the data. At the low end, and courtesy of our multi-dimensional acquisition, the principles behind diffraction tomography theoretically extend our range to zero-wavenumbers, mainly provided by transmissions like diving waves. Within certain regions of the subsurface (i.e. deep), we face the prospective of having a model wavenumber gap in representing the velocity. Here, I demonstrate that inverting for multi scattered energy, we can recover additional wavenumbers not provided by single scattering gradients, that may feed the high and low ends of the model wavenumber spectrum, as well as help us fill in the infamous intermediate wavenumber gap. Thus, I outline a scenario in which we acquire dedicated sparse frequency data, allowing for more time to inject more energy of those frequencies at a reduced cost. Such additional energy is necessary to the recording of more multi-scattered events. The objective of this new paradigm is a high resolution model of the Earth.
High-frequency seafloor acoustics
National Research Council Canada - National Science Library
Jackson, D. R; Richardson, M. D
2007-01-01
This title provides access to experimental data, theory, and models relevant to high-frequency seafloor acoustics and will be of interest to sonar engineers and researchers working in underwater acoustics...
Geographies of High Frequency Trading
DEFF Research Database (Denmark)
Grindsted, Thomas Skou
2016-01-01
This paper investigates the geographies of high frequency trading. Today shares shift hands within micro seconds, giving rise to a form of financial geographies termed algorithmic capitalism. This notion refers to the different spatio-temporalities produced by high frequency trading, under...... the valuation of time. As high frequency trading accelerates financial markets, the paper examines the spatio-temporalities of automated trading by the ways in which the speed of knowledge exploitation in financial markets is not only of interest, but also the expansion between different temporalities....... The paper demonstrates how the intensification of time-space compression produces radical new dynamics in the financial market and develops information rent in HFT as convertible to a time rent and a spatio-temporal rent. The final section discusses whether high frequency trading only responds to crises...
Research News -- Meson scattering at high precision
Ananthanarayan, B
2007-01-01
A fascinating new generation of experiments has determined certain meson scattering parameters at high precision. A confluence of highly sophisticated theory as well as new experimental ideas have led to this state of affairs, which sheds important light on the properties of the strong interactions. A brief review of the experiments and the theory is presented.
Bragg-Scattering Four-Wave Mixing in Nonlinear Fibers with Intracavity Frequency-Shifted Laser Pumps
Directory of Open Access Journals (Sweden)
Katarzyna Krupa
2012-01-01
Full Text Available We experimentally study four-wave mixing in highly nonlinear fibers using two independent and partially coherent laser pumps and a third coherent signal. We focus our attention on the Bragg-scattering frequency conversion. The two pumps were obtained by amplifying two Intracavity frequency-shifted feedback lasers working in a continuous wave regime.
High-frequency lunar teleseismic events
Nakamura, Y.; Dorman, J.; Duennebier, F.; Ewing, M.; Lammlein, D.; Latham, G.
1974-01-01
A small number of seismic signals, including some of the strongest observed to date, have been identified as representing a fourth principal category of natural lunar seismic events with characteristics distinct from those produced by normal meteoroid impacts, deep moonquakes, and thermal moonquakes. These signals are much richer in high frequencies than other events observed at comparable distances, and display relatively impulsive P- and S-wave beginnings, indicating negligible seismic-wave scattering near the source. Source depths of these events may range between 0 and perhaps 300 km. These and other characteristics could represent either (1) meteoroids impacting upon outcrops of competent lunar crystal rock, (2) rare impacting objects that penetrate to competent rock below a scattering zone, or (3) shallow tectonic moonquakes.
High resolution low frequency ultrasonic tomography.
Lasaygues, P; Lefebvre, J P; Mensah, S
1997-10-01
Ultrasonic reflection tomography results from a linearization of the inverse acoustic scattering problem, named the inverse Born approximation. The goal of ultrasonic reflection tomography is to obtain reflectivity images from backscattered measurements. This is a Fourier synthesis problem and the first step is to correctly cover the frequency space of the object. For this inverse problem, we use the classical algorithm of tomographic reconstruction by summation of filtered backprojections. In practice, only a limited number of views are available with our mechanical rig, typically 180, and the frequency bandwidth of the pulses is very limited, typically one octave. The resolving power of the system is them limited by the bandwidth of the pulse. Low and high frequencies can be restored by use of a deconvolution algorithm that enhances resolution. We used a deconvolution technique based on the Papoulis method. The advantage of this technique is conservation of the overall frequency information content of the signals. The enhancement procedure was tested by imaging a square aluminium rod with a cross-section less than the wavelength. In this application, the central frequency of the transducer was 250 kHz so that the central wavelength was 6 mm whereas the cross-section of the rod was 4 mm. Although the Born approximation was not theoretically valid in this case (high contrast), a good reconstruction was obtained.
Effects of Raman scattering in quantum state-preserving frequency conversion
DEFF Research Database (Denmark)
Friis, Søren Michael Mørk; Andersen, Lasse Mejling; Castaneda, Mario A. Usuga;
2014-01-01
We analyse frequency conversion by Bragg scattering numerically including Raman scattering. The frequency configuration that performs the best under influence of Raman noise results in 95% conversion over a 3.25 THz bandwidth with a 2.5-dB noise figure....
Thomson scattering in high-intensity chirped laser pulses
Energy Technology Data Exchange (ETDEWEB)
Holkundkar, Amol R., E-mail: amol.holkundkar@pilani.bits-pilani.ac.in [Department of Physics, Birla Institute of Technology and Science, Pilani, Rajasthan 333031 (India); Harvey, Chris, E-mail: christopher.harvey@chalmers.se; Marklund, Mattias, E-mail: mattias.marklund@chalmers.se [Department of Applied Physics, Chalmers University of Technology, SE-41296 Gothenburg (Sweden)
2015-10-15
We consider the Thomson scattering of an electron in an ultra-intense laser pulse. It is well known that at high laser intensities, the frequency and brilliance of the emitted radiation will be greatly reduced due to the electron losing energy before it reaches the peak field. In this work, we investigate the use of a small frequency chirp in the laser pulse in order to mitigate this effect of radiation reaction. It is found that the introduction of a negative chirp means the electron enters a high frequency region of the field while it still has a large proportion of its original energy. This results in a significant enhancement of the frequency and intensity of the emitted radiation as compared to the case without chirping.
High-frequency Trader Subjectivity
DEFF Research Database (Denmark)
Borch, Christian; Lange, Ann-Christina
2017-01-01
In this article, we examine the recent shift in financial markets toward high-frequency trading (HFT). This turn is being legitimized with reference to how algorithms are allegedly more rational and efficient than human traders, and less prone to emotionally motivated decisions. We argue...... that although HFT does not render humans irrelevant, it is leading to a reconfiguration of both the ideal trading subject and the human–machine relations. Drawing on interviews with and ethnographic observations of high-frequency traders, as well as HFT ‘how to’ books, we analyze the subjectivity and self......-techniques of the ideal high-frequency trader. We demonstrate that these traders face the challenge of avoiding emotional interference in their algorithms and that they deploy a set of disciplinary self-techniques to curb the importance of emotional attachment....
Fly Eye radar: detection through high scattered media
Molchanov, Pavlo; Gorwara, Ashok
2017-05-01
Longer radio frequency waves better penetrating through high scattered media than millimeter waves, but imaging resolution limited by diffraction at longer wavelength. Same time frequency and amplitudes of diffracted waves (frequency domain measurement) provides information of object. Phase shift of diffracted waves (phase front in time domain) consists information about shape of object and can be applied for reconstruction of object shape or even image by recording of multi-frequency digital hologram. Spectrum signature or refracted waves allows identify the object content. Application of monopulse method with overlap closely spaced antenna patterns provides high accuracy measurement of amplitude, phase, and direction to signal source. Digitizing of received signals separately in each antenna relative to processor time provides phase/frequency independence. Fly eye non-scanning multi-frequency radar system provides simultaneous continuous observation of multiple targets and wide possibilities for stepped frequency, simultaneous frequency, chaotic frequency sweeping waveform (CFS), polarization modulation for reliable object detection. Proposed c-band fly eye radar demonstrated human detection through 40 cm concrete brick wall with human and wall material spectrum signatures and can be applied for through wall human detection, landmines, improvised explosive devices detection, underground or camouflaged object imaging.
DEFF Research Database (Denmark)
Santurette, Sébastien; Dau, Torsten
2012-01-01
Harmonics in a complex tone are typically considered unresolved when they interact with neighboring harmonics in the cochlea and cannot be heard out separately. Recent studies have suggested that the low pitch evoked by unresolved high-frequency harmonics may be coded via temporal fine-structure ......Harmonics in a complex tone are typically considered unresolved when they interact with neighboring harmonics in the cochlea and cannot be heard out separately. Recent studies have suggested that the low pitch evoked by unresolved high-frequency harmonics may be coded via temporal fine...
High luminosity muon scattering at FNAL
Energy Technology Data Exchange (ETDEWEB)
Bazizi, K. (California Univ., Riverside, CA (USA)); Conrad, J.; Fang, G. (Harvard Univ., Cambridge, MA (USA)); Erdmann, M. (Freiburg Univ. (Germany, F.R.)); Geesaman, D.; Jackson, H. (Argonne National Lab., IL (USA)); Guyot, C.; Virchaux, M. (CEA Centre d' Etudes Nucleaires de Saclay, 91 - Gif-sur-Yvette (France)); Holmgren, H. (Maryland Univ., College Park, MD (USA)); Malensek, A.; Melanson, H.; Morfin
1990-02-01
The charge of this group was to evaluate the physics that can be done with a high luminosity {mu} scattering experiment at FNAL using the upgraded Tevatron muon beam, and consider the apparatus required. In this report, the physics that can be accomplished with a high luminosity {mu} scattering experiment is evaluated. The CERN and FNAL {mu} beams are compared in the context of such an experiment. The expected muon flux with the upgraded machine is estimated. Two possible detectors are compared: the air-core toroid experiment proposed by Guyot et al., and an upgraded version of the E665 double-diode apparatus now in place at FNAL. The relative costs of the detectors are considered. A list of detailed questions that need to be answered regarding the double-diode experiment has be compiled. 2 refs., 10 figs., 2 tabs.
High-Energy Compton Scattering Light Sources
Hartemann, Fred V; Barty, C; Crane, John; Gibson, David J; Hartouni, E P; Tremaine, Aaron M
2005-01-01
No monochromatic, high-brightness, tunable light sources currently exist above 100 keV. Important applications that would benefit from such new hard x-ray sources include: nuclear resonance fluorescence spectroscopy, time-resolved positron annihilation spectroscopy, and MeV flash radiography. The peak brightness of Compton scattering light sources is derived for head-on collisions and found to scale with the electron beam brightness and the drive laser pulse energy. This gamma 2
Narrowband inverse Compton scattering x-ray sources at high laser intensities
Seipt, D; Surzhykov, A; Fritzsche, S
2014-01-01
Narrowband x- and gamma-ray sources based on the inverse Compton scattering of laser pulses suffer from a limitation of the allowed laser intensity due to the onset of nonlinear effects that increase their bandwidth. It has been suggested that laser pulses with a suitable frequency modulation could compensate this ponderomotive broadening and reduce the bandwidth of the spectral lines, which would allow to operate narrowband Compton sources in the high-intensity regime. In this paper we, therefore, present the theory of nonlinear Compton scattering in a frequency modulated intense laser pulse. We systematically derive the optimal frequency modulation of the laser pulse from the scattering matrix element of nonlinear Compton scattering, taking into account the electron spin and recoil. We show that, for some particular scattering angle, an optimized frequency modulation completely cancels the ponderomotive broadening for all harmonics of the backscattered light. We also explore how sensitive this compensation ...
Renormalized scattering series for frequency-domain waveform modelling of strong velocity contrasts
Jakobsen, M.; Wu, R. S.
2016-08-01
An improved description of scattering and inverse scattering processes in reflection seismology may be obtained on the basis of a scattering series solution to the Helmoltz equation, which allows one to separately model primary and multiple reflections. However, the popular scattering series of Born is of limited seismic modelling value, since it is only guaranteed to converge if the global contrast is relatively small. For frequency-domain waveform modelling of realistic contrasts, some kind of renormalization may be required. The concept of renormalization is normally associated with quantum field theory, where it is absolutely essential for the treatment of infinities in connection with observable quantities. However, the renormalization program is also highly relevant for classical systems, especially when there are interaction effects that act across different length scales. In the scattering series of De Wolf, a renormalization of the Green's functions is achieved by a split of the scattering potential operator into fore- and backscattering parts; which leads to an effective reorganization and partially re-summation of the different terms in the Born series, so that their order better reflects the physics of reflection seismology. It has been demonstrated that the leading (single return) term in the De Wolf series (DWS) gives much more accurate results than the corresponding Born approximation, especially for models with high contrasts that lead to a large accumulation of phase changes in the forward direction. However, the higher order terms in the DWS that are associated with internal multiples have not been studied numerically before. In this paper, we report from a systematic numerical investigation of the convergence properties of the DWS which is based on two new operator representations of the DWS. The first operator representation is relatively similar to the original scattering potential formulation, but more global and explicit in nature. The second
High frequency trading and fragility
Cespa, Giovanni; Vives, Xavier
2017-01-01
We show that limited dealer participation in the market, coupled with an informational friction resulting from high frequency trading, can induce demand for liquidity to be upward sloping and strategic complementarities in traders’ liquidity consumption decisions: traders demand more liquidity when the market becomes less liquid, which in turn makes the market more illiquid, fostering the initial demand hike. This can generate market instability, where an initial dearth of liquidity degenerat...
Institute of Scientific and Technical Information of China (English)
SONG Yan-qi; LIU Shao-pu; LIU Zhong-fang; HU Xiao-li
2011-01-01
In 0.1 mol/L HCl medium,12-tungstophosphoric(TP) acid reacted with matrine(Mat) and oxymatrine(Oxy)to form an ion-association complex.As a result,the new spectra of resonance Rayleigh scattering(RRS),second-order scattering(SOS) and frequency doubling scattering(FDS) appeared and their intensities were enhanced greatly.The maximum scattering wavelengths of RRS,SOS and FDS were located at 370,670 and 390 nm,respectively.The increments of scattering intensity were directly proportional to the concentration of Mat and Oxy in a certain range.Based on this,the method for the determination of matrine and oxymatrine has been established.It has been applied to the determination of matrine and oxymatrine in samples of Radix sophorae flavescentis with satisfactory result.The reaction mechanism and reasons of RRS enhancement were discussed.
High-speed stimulated Brillouin scattering spectroscopy at 780 nm
Directory of Open Access Journals (Sweden)
Itay Remer
2016-09-01
Full Text Available We demonstrate a high-speed stimulated Brillouin scattering (SBS spectroscopy system that is able to acquire stimulated Brillouin gain point-spectra in water samples and Intralipid tissue phantoms over 2 GHz within 10 ms and 100 ms, respectively, showing a 10-100 fold increase in acquisition rates over current frequency-domain SBS spectrometers. This improvement was accomplished by integrating an ultra-narrowband hot rubidium-85 vapor notch filter in a simplified frequency-domain SBS spectrometer comprising nearly counter-propagating continuous-wave pump-probe light at 780 nm and conventional single-modulation lock-in detection. The optical notch filter significantly suppressed stray pump light, enabling detection of stimulated Brillouin gain spectra with substantially improved acquisition times at adequate signal-to-noise ratios (∼25 dB in water samples and ∼15 dB in tissue phantoms. These results represent an important step towards the use of SBS spectroscopy for high-speed measurements of Brillouin gain resonances in scattering and non-scattering samples.
High-frequency submicrosecond electroporator
Directory of Open Access Journals (Sweden)
Vitalij Novickij
2016-05-01
Full Text Available In this work, we present a novel electroporator which is capable of generating single and bursts of high power (3 kV, 60 A square wave pulses of variable duration (100 ns to 1 ms with predefined repetition frequency (1 Hz to 3.5 MHz. The proposed synchronized crowbar implementation ensures a constant pulse rise and fall times, which are independent from the load, thus highly relevant in electroporation. The electroporator was successfully tested for the inactivation of the human pathogen Candida albicans. The device is compatible with standard commercial electroporation cuvettes.
Low-Frequency Scattering from Heterogeneous Sea Beds
2012-09-30
4th Internat. Conf. Underwater Acoustic Measurements: Technology and Results (UAM2011), J.S. Papadakis and L. Bjorno (Eds), pp. 1615-1622. 14. A.N...Measurements: Technology and Results (UAM2011), J.S. Papadakis and L. Bjorno (Eds), pp. 1615-1622. A. N. Ivakin (2011), “Sound scattering from the ocean
Origin of the frequency shift of Raman scattering in chalcogenide glasses
DEFF Research Database (Denmark)
Han, X.C.; Tao, H.Z.; Gong, L.J.;
2014-01-01
Raman scattering is a sensitive method for probing the structural evolution in glasses, especially in covalent ones. Usually the main Raman scattering frequency shifts with composition for Gesingle bondSe chalcogenide glasses. However, it has not been well established whether and how the dependen...
High-current, high-frequency capacitors
Renz, D. D.
1983-06-01
The NASA Lewis high-current, high-frequency capacitor development program was conducted under a contract with Maxwell Laboratories, Inc., San Diego, California. The program was started to develop power components for space power systems. One of the components lacking was a high-power, high-frequency capacitor. Some of the technology developed in this program may be directly usable in an all-electric airplane. The materials used in the capacitor included the following: the film is polypropylene, the impregnant is monoisopropyl biphenyl, the conductive epoxy is Emerson and Cuming Stycast 2850 KT, the foil is aluminum, the case is stainless steel (304), and the electrode is a modified copper-ceramic.
Frequency dependent polarization analysis of high-frequency seismograms
Park, Jeffrey; Vernon, Frank L., III; Lindberg, Craig R.
1987-11-01
We present a multitaper algorithm to estimate the polarization of particle motion as a function of frequency from three-component seismic data. This algorithm is based on a singular value decomposition of a matrix of eigenspectra at a given frequency. The right complex eigenvector zˆ corresonding to the largest singular value of the matrix has the same direction as the dominant polarization of seismic motion at that frequency. The elements of the polarization vector zˆ specify the relative amplitudes and phases of motion measured along the recorded components within a chosen frequency band. The width of this frequency band is determined by the time-bandwidth product of the prolate spheroidal tapers used in the analysis. We manipulate the components of zˆ to determine the apparent azimuth and angle of incidence of seismic motion as a function of frequency. The orthogonality of the eigentapers allows one to calculate easily uncertainties in the estimated azimuth and angle of incidence. We apply this algorithm to data from the Anza Seismic Telemetered Array in the frequency band 0 ≤ ƒ ≤ 30 Hz. The polarization is not always a smooth function of frequency and can exhibit sharp jumps, suggesting the existence of scattered modes within the crustal waveguide and/or receiver site resonances.
High-frequency magnetic components
Kazimierczuk, Marian K
2013-01-01
A unique text on the theory and design fundaments of inductors and transformers, updated with more coverage on the optimization of magnetic devices and many new design examples The first edition is popular among a very broad audience of readers in different areas of engineering and science. This book covers the theory and design techniques of the major types of high-frequency power inductors and transformers for a variety of applications, including switching-mode power supplies (SMPS) and resonant dc-to-ac power inverters and dc-to-dc power converters. It describes eddy-current phenomena (su
High Temperature Radio Frequency Loads
Federmann, S; Grudiev, A; Montesinos, E; Syratchev, I
2011-01-01
In the context of energy saving and recovery requirements the design of reliable and robust RF power loads which permit a high outlet temperature and high pressure of the cooling water is desirable. Cooling water arriving at the outlet withmore than 150 ◦C and high pressure has a higher value than water with 50 ◦C under low pressure. Conventional RF power loads containing dielectric and magnetic materials as well as sensitive ceramic windows usually do not permit going much higher than 90 ◦C. Here we present and discuss several design concepts for "metal only" RF high power loads. One concept is the application of magnetic steel corrugated waveguides near cutoff – this concept could find practical use above several GHz. Another solution are resonant structures made of steel to be installed in large waveguides for frequencies of 500 MHz or lower. Similar resonant structures above 100 MHz taking advantage of the rather high losses of normal steel may also be used in coaxial line geometries with large di...
High frequency welded (ERW) casing
Energy Technology Data Exchange (ETDEWEB)
Duisberg, J. (Hoesch Roehrenwerke A.G., Hamm (Germany, F.R.))
1980-09-01
Due to the up-to-date standard in welding and testing techniques, the significance of ERW-casing is growing rapidly. The basic items of ERW-pipe are explained in detail. The forming mechanism, the high frequency welding by induction and contact welding processes is explained in detail as well as destructive and non-destructive testing methods. Finishing the ends as threading, thread control (gauging), power tight connection, pressure test and final quality control are rounding up the picture of the production of ERW-casing. Last but not least the test results from the joint strength- and collapse tests which are of outstanding interest for casings, are compared with API requirements in order to demonstrate compliance with API requirements.
High Frequency Linacs for Hadrontherapy
Amaldi, Ugo; Braccini, Saverio; Puggioni, Paolo
The use of radiofrequency linacs for hadrontherapy was proposed about 20 years ago, but only recently has it been understood that the high repetition rate together with the possibility of very rapid energy variations offers an optimal solution to the present challenge of hadrontherapy: "paint" a moving tumor target in three dimensions with a pencil beam. Moreover, the fact that the energy, and thus the particle range, can be electronically adjusted implies that no absorber-based energy selection system is needed, which, in the case of cyclotron-based centers, is the cause of material activation. On the other side, a linac consumes less power than a synchrotron. The first part of this article describes the main advantages of high frequency linacs in hadrontherapy, the early design studies, and the construction and test of the first high-gradient prototype which accelerated protons. The second part illustrates some technical issues relevant to the design of copper standing wave accelerators, the present developments, and two designs of linac-based proton and carbon ion facilities. Superconductive linacs are not discussed, since nanoampere currents are sufficient for therapy. In the last two sections, a comparison with circular accelerators and an overview of future projects are presented.
Wang, Jiao; Xue, Jinhua; Xiao, Xilin; Xu, Li; Jiang, Min; Peng, Pengcheng; Liao, Lifu
2017-12-05
The coordination reaction of thorium (IV) with a ditopic bidentate ligand to form supramolecular polymer was studied by resonance light scattering (RLS) spectra, second-order scattering (SOS) spectra and frequency-doubling scattering (FDS) spectra, respectively. The ditopic bidentate ligand is isophthalaldehyde-tetrapyrrole (IPTP). It was synthesized through a condensation reaction of isophthalaldehyde with pyrrole. The formation of supramolecular polymer results in remarkable intensity enhancements of the three light scattering signals. The maximum scattering wavelengths of RLS, FDS and SOS were 290, 568 and 340nm, respectively. The reaction was used to establish new light scattering methods for the determination of thorium (IV) by using IPTP as probe. Under optimum conditions, the intensity enhancements of RLS, SOS and FDS were directly proportional to the concentration of thorium (IV) in the ranges of 0.01 to 1.2μgmL(-1), 0.05 to 1.2μgmL(-1) and 0.05 to 1.2μgmL(-1), respectively. The detection limits were 0.003μgmL(-1), 0.012μgmL(-1) and 0.021μgmL(-1), respectively. The methods were suitable for analyzing thorium (IV) in actual samples. The results show acceptable recoveries and precision compared with a reference method. Copyright © 2017 Elsevier B.V. All rights reserved.
Multiple exchange and high-energy fixed-angle scattering
Halliday, I G; Orzalesi, C A; Tau, M
1975-01-01
The application of the eikonal ansatz to fermion fermion elastic scattering with Abelian vector gluon exchanges is discussed. The behaviours of the elastic scattering amplitude and the elastic form factor are considered and an important mechanism for fixed angle high energy elastic scattering is identified. (6 refs).
Frequency width of open channels in multiple scattering media.
Bosch, Jeroen; Goorden, Sebastianus A; Mosk, Allard P
2016-11-14
We report optical measurements of the spectral width of open transmission channels in a three-dimensional diffusive medium. The light transmission through a sample is enhanced by efficiently coupling to open transmission channels using repeated digital optical phase conjugation. The spectral properties are investigated by enhancing the transmission, fixing the incident wavefront and scanning the wavelength of the laser. We measure the transmitted field to extract the field correlation function and the enhancement of the total transmission. We find that optimizing the total transmission leads to a significant increase in the frequency width of the field correlation function. Additionally we find that the enhanced transmission persists over an even larger frequency bandwidth. This result shows open channels in the diffusive regime are spectrally much wider than previous measurements in the localized regime suggest.
Low-Frequency Scattering from Two-Dimensional Perfect Conductors
1991-04-01
jkr ! G(f, f’)K.(f’)ds’, f E S (2.6) where the bar on the integral sign indicates that the singularity at f = f’ is excluded. From the small...2.17) is O~n’ 7 The bar on the integral sign indicates that this is a Cauchy principal value integration. To determine the low-frequency expansion
Econometrics of financial high-frequency data
Hautsch, Nikolaus
2011-01-01
This book covers major approaches in high-frequency econometrics. It discusses implementation details, provides insights into properties of high-frequency data as well as institutional settings and presents applications.
High-precision positioning of radar scatterers
Dheenathayalan, P.; Small, D.; Schubert, A.; Hanssen, R.F.
2016-01-01
Remote sensing radar satellites cover wide areas and provide spatially dense measurements, with millions of scatterers. Knowledge of the precise position of each radar scatterer is essential to identify the corresponding object and interpret the estimated deformation. The absolute position accuracy
High Frequency Chandler Wobble Excitation
Seitz, F.; Stuck, J.; Thomas, M.
2003-04-01
and OMCT forcing fields give no hint for increased excitation power in the Chandler band. Thus it is assumed, that continuous high frequency excitation due to stochastic weather phenomena is responsible for the perpetuation of the Chandler wobble.
Mahmoudian, A.; Scales, W. A.; Bernhardt, P. A.; Fu, H.; Briczinski, S. J.; McCarrick, M. J.
2013-11-01
Stimulated Electromagnetic Emissions (SEEs), secondary electromagnetic waves excited by high power electromagnetic waves transmitted into the ionosphere, produced by the Magnetized Stimulated Brillouin Scatter (MSBS) process are investigated. Data from four recent research campaigns at the High Frequency Active Auroral Research Program (HAARP) facility is presented in this work. These experiments have provided additional quantitative interpretation of the SEE spectrum produced by MSBS to yield diagnostic measurements of the electron temperature and ion composition in the heated ionosphere. SEE spectral emission lines corresponding to ion acoustic (IA) and electrostatic ion cyclotron (EIC) mode excitation were observed with a shift in frequency up to a few tens of Hz from the pump frequency for heating near the third harmonic of the electron gyrofrequency 3fce. The threshold of each emission line has been measured by changing the pump wave power. The excitation threshold of IA and EIC emission lines originating at the reflection and upper hybrid altitudes is measured for various beam angles relative to the magnetic field. Variation of strength of MSBS emission lines with pump frequency relative to 3fce and 4fce is also studied. A full wave solution has been used to estimate the amplitude of the electric field at the interaction altitude. The estimated instability threshold using the theoretical model is compared with the threshold of MSBS lines in the experiment and possible diagnostic information for the background ionospheric plasma is discussed. Simultaneous formation of artificial field-aligned irregularities (FAIs) and suppression of the MSBS process is investigated. This technique can be used to estimate the growth time of artificial FAIs which may result in determination of plasma waves and physical process involved in the formation of FAIs.
Flux profile scanners for scattered high-energy electrons
Hicks, R. S.; Decowski, P.; Arroyo, C.; Breuer, M.; Celli, J.; Chudakov, E.; Kumar, K. S.; Olson, M.; Peterson, G. A.; Pope, K.; Ricci, J.; Savage, J.; Souder, P. A.
2005-11-01
The paper describes the design and performance of flux integrating Cherenkov scanners with air-core reflecting light guides used in a high-energy, high-flux electron scattering experiment at the Stanford Linear Accelerator Center. The scanners were highly radiation resistant and provided a good signal to background ratio leading to very good spatial resolution of the scattered electron flux profile scans.
Effects of Raman scattering and attenuation in silica fiber-based parametric frequency conversion
DEFF Research Database (Denmark)
Friis, Søren Michael Mørk; Andersen, Lasse Mejling; Rottwitt, Karsten
2017-01-01
Four-wave mixing in the form of Bragg scattering (BS) has been predicted to enable quantum noise-less frequency conversion by analytic quantum approaches. Using a semi-classical description of quantum noise that accounts for loss and stimulated and spontaneous Raman scattering, which are not curr......Four-wave mixing in the form of Bragg scattering (BS) has been predicted to enable quantum noise-less frequency conversion by analytic quantum approaches. Using a semi-classical description of quantum noise that accounts for loss and stimulated and spontaneous Raman scattering, which...... are not currently described in existing quantum approaches, we quantify the impacts of these effects on the conversion efficiency and on the quantum noise properties of BS in terms of an induced noise figure (NF). We give an approximate closed-form expression for the BS conversion efficiency that includes loss...... and stimulated Raman scattering, and we derive explicit expressions for the Raman-induced NF from the semi-classical approach used here. We find that Raman scattering induces a NF in the BS process that is comparable to the 3-dB NF associated with linear amplifiers...
$f$-mode interaction with models of sunspot : near-field scattering and multi-frequency effects
Daiffallah, Khalil
2016-01-01
We use numerical simulations to investigate the interaction of an $f$-mode wave packet with small and large models of a sunspot in a stratified atmosphere. While a loose cluster model has been largely studied before, we focus in this study on the scattering from an ensemble of tightly compact tubes. We showed that the small compact cluster produces a slight distorted scattered wave field in the transverse direction, which can be attributed to the simultaneous oscillations of the pairs of tubes within the cluster aligned in a perpendicular direction to the incoming wave. However, no signature of a multiple-scattering regime has been observed from this model, while it has been clearly observable for the large compact cluster model. Furthermore, we pointed out the importance of the geometrical shape of the monolithic model on the interaction of $f$-mode waves with a sunspot in a high frequency range ($\
Low frequency sound scattering from spherical assemblages of bubbles using effective medium theory.
Hahn, Thomas R
2007-12-01
The determination of the acoustic field scattered by an underwater assembly of gas bubbles or similar resonant monopole scatterers is of considerable theoretical and practical interest. This problem is addressed from a theoretical point of view within the framework of the effective medium theory for the case of spherically shaped assemblages. Although being valid more generally, the effective medium theory is an ideal instrument to study multiple scattering effects such as low frequency collective resonances, acoustically coupled breathing modes of the entire assembly. Explicit expressions for the scattering amplitude and cross sections are derived, as well as closed form expressions for the resonance frequency and spectral shape of the fundamental collective mode utilizing analytical S-matrix methods. This approach allows, in principle, a simultaneous inversion for the assembly radius and void fraction directly from the scattering cross sections. To demonstrate the validity of the approach, the theory is applied to the example of idealized, spherically shaped schools of swim bladder bearing fish. The analytic results of the theory are compared to numerical first-principle benchmark computations and excellent agreement is found, even for densely packed schools and frequencies across the bladder resonance.
High Resolution Frequency Swept Imaging.
1980-02-14
centers on practical targets. (iv) Greater immunity to phase fluctuations arising from turbulance and inhomogenieties in the propagation medium because...frequency swept illumination. Since the impulse reponse of a time invariant linear system can also be deduced from white noise excitation and
2013-11-26
...] Nationwide Use of High Frequency and Ultra High Frequency Active SONAR Technology; Final Programmatic... Programmatic Environmental Assessment (PEA) for the Nationwide Use of High Frequency (HF) and Ultra High Frequency (UHF) Sound Navigation and Ranging (SONAR) Technology and Finding of No Significant Impact (FONSI...
Scattering and extinction from high-aspect-ratio trenches
DEFF Research Database (Denmark)
Roberts, Alexander Sylvester; Søndergaard, Thomas; Chirumamilla, Manohar;
2015-01-01
We construct a semi-analytical model describing the scattering, extinction and absorption properties of a high aspect-ratio trench in a metallic film. We find that these trenches act as highly efficient scatterers of free waves. In the perfect conductor limit, which for many metals is approached...
High energy scattering in gravity and supergravity
DEFF Research Database (Denmark)
B. Giddings, Steven; Schmidt-Sommerfeld, Maximilian; Andersen, Jeppe Rosenkrantz
2010-01-01
We investigate features of perturbative gravity and supergravity by studying scattering in the ultraplanckian limit, and sharpen arguments that the dynamics is governed by long-distance physics. A simple example capturing aspects of the eikonal resummation suggests why short distance phenomena...... and in particular divergences or nonrenormalizability do not necessarily play a central role in this regime. A more profound problem is apparently unitarity. These considerations can be illustrated by showing that known gravity and supergravity amplitudes have the same long-distance behavior, despite the extra...... a physical scattering process, and ultraplanckian scattering exhibiting Regge behavior. These arguments sharpen the need to find a nonperturbative completion of gravity with mechanisms which restore unitarity in the strong gravity regime....
High frequency pressure oscillator for microcryocoolers
Vanapalli, Srinivas; ter Brake, Hermanus J.M.; Jansen, Henricus V.; Zhao, Yiping; Holland, Herman J.; Burger, Johannes Faas; Elwenspoek, Michael Curt
2008-01-01
Microminiature pulse tube cryocoolers should operate at a frequency of an order higher than the conventional macro ones because the pulse tube cryocooler operating frequency scales inversely with the square of the pulse tube diameter. In this paper, the design and experiments of a high frequency
High frequency pressure oscillator for microcryocoolers
Vanapalli, Srinivas; ter Brake, Hermanus J.M.; Jansen, Henricus V.; Zhao, Yiping; Holland, Herman J.; Burger, Johannes Faas; Elwenspoek, Michael Curt
2008-01-01
Microminiature pulse tube cryocoolers should operate at a frequency of an order higher than the conventional macro ones because the pulse tube cryocooler operating frequency scales inversely with the square of the pulse tube diameter. In this paper, the design and experiments of a high frequency pre
High frequency pressure oscillator for microcryocoolers
Vanapalli, S.; Brake, ter H.J.M.; Jansen, H.V.; Zhao, Y.; Holland, H.J.; Burger, J.F.; Elwenspoek, M.C.
2008-01-01
Microminiature pulse tube cryocoolers should operate at a frequency of an order higher than the conventional macro ones because the pulse tube cryocooler operating frequency scales inversely with the square of the pulse tube diameter. In this paper, the design and experiments of a high frequency pre
Coherent scattering of high-energy photon in a medium
Baier, V N
2001-01-01
The coherent scattering of photon in the Coulomb field (the Delbr\\"uck scattering) is considered for the momentum transfer $\\Delta \\ll m$ in the frame of the quasiclassical operator method. In high-energy region this process occurs over rather long distance. The process amplitude is calculated taking into account the multiple scattering of particles of the intermediate electron-positron pair in a medium. The result is the suppression of the process. Limiting cases of weak and strong effects of the multiple scattering are analyzed. The approach used is the generalization of the method developed by authors for consideration of the Landau-Pomeranchuk-Migdal effect.
Correcting for Interstellar Scattering Delay in High-precision Pulsar Timing: Simulation Results
Palliyaguru, Nipuni; Stinebring, Daniel; McLaughlin, Maura; Demorest, Paul; Jones, Glenn
2015-12-01
Light travel time changes due to gravitational waves (GWs) may be detected within the next decade through precision timing of millisecond pulsars. Removal of frequency-dependent interstellar medium (ISM) delays due to dispersion and scattering is a key issue in the detection process. Current timing algorithms routinely correct pulse times of arrival (TOAs) for time-variable delays due to cold plasma dispersion. However, none of the major pulsar timing groups correct for delays due to scattering from multi-path propagation in the ISM. Scattering introduces a frequency-dependent phase change in the signal that results in pulse broadening and arrival time delays. Any method to correct the TOA for interstellar propagation effects must be based on multi-frequency measurements that can effectively separate dispersion and scattering delay terms from frequency-independent perturbations such as those due to a GW. Cyclic spectroscopy, first described in an astronomical context by Demorest (2011), is a potentially powerful tool to assist in this multi-frequency decomposition. As a step toward a more comprehensive ISM propagation delay correction, we demonstrate through a simulation that we can accurately recover impulse response functions (IRFs), such as those that would be introduced by multi-path scattering, with a realistic signal-to-noise ratio (S/N). We demonstrate that timing precision is improved when scatter-corrected TOAs are used, under the assumptions of a high S/N and highly scattered signal. We also show that the effect of pulse-to-pulse “jitter” is not a serious problem for IRF reconstruction, at least for jitter levels comparable to those observed in several bright pulsars.
CORRECTING FOR INTERSTELLAR SCATTERING DELAY IN HIGH-PRECISION PULSAR TIMING: SIMULATION RESULTS
Energy Technology Data Exchange (ETDEWEB)
Palliyaguru, Nipuni; McLaughlin, Maura [Department of Physics, West Virginia University, Morgantown, WV 26506 (United States); Stinebring, Daniel [Department of Physics and Astronomy, Oberlin College, 110 North Professor Street, Oberlin, OH 44074 (United States); Demorest, Paul [National Radio Astronomy Observatory, 520 Edgemont Road, Charlottesville, VA 22903 (United States); Jones, Glenn, E-mail: npalliya@mix.wvu.edu, E-mail: maura.mclaughlin@mail.wvu.edu, E-mail: dan.stinebring@oberlin.edu, E-mail: pdemores@nrao.edu, E-mail: glenn.caltech@gmail.com [Department of Physics, Columbia University, New York, NY 10027 (United States)
2015-12-20
Light travel time changes due to gravitational waves (GWs) may be detected within the next decade through precision timing of millisecond pulsars. Removal of frequency-dependent interstellar medium (ISM) delays due to dispersion and scattering is a key issue in the detection process. Current timing algorithms routinely correct pulse times of arrival (TOAs) for time-variable delays due to cold plasma dispersion. However, none of the major pulsar timing groups correct for delays due to scattering from multi-path propagation in the ISM. Scattering introduces a frequency-dependent phase change in the signal that results in pulse broadening and arrival time delays. Any method to correct the TOA for interstellar propagation effects must be based on multi-frequency measurements that can effectively separate dispersion and scattering delay terms from frequency-independent perturbations such as those due to a GW. Cyclic spectroscopy, first described in an astronomical context by Demorest (2011), is a potentially powerful tool to assist in this multi-frequency decomposition. As a step toward a more comprehensive ISM propagation delay correction, we demonstrate through a simulation that we can accurately recover impulse response functions (IRFs), such as those that would be introduced by multi-path scattering, with a realistic signal-to-noise ratio (S/N). We demonstrate that timing precision is improved when scatter-corrected TOAs are used, under the assumptions of a high S/N and highly scattered signal. We also show that the effect of pulse-to-pulse “jitter” is not a serious problem for IRF reconstruction, at least for jitter levels comparable to those observed in several bright pulsars.
Quasi-elastic nuclear scattering at high energies
Cucinotta, Francis A.; Townsend, Lawrence W.; Wilson, John W.
1992-01-01
The quasi-elastic scattering of two nuclei is considered in the high-energy optical model. Energy loss and momentum transfer spectra for projectile ions are evaluated in terms of an inelastic multiple-scattering series corresponding to multiple knockout of target nucleons. The leading-order correction to the coherent projectile approximation is evaluated. Calculations are compared with experiments.
Qiao, G J; Zhang, B; Han, J L
2001-01-01
The shapes of pulse profiles, especially their variations with respect to observing frequencies, are very important to understand emission mechanisms of pulsars, while no previous attempt has been made in interpreting the complicated phenomenology. In this paper, we present theoretical simulations for the integrated pulse profiles and their frequency evolution within the framework of the inverse Compton scattering (ICS) model proposed by Qiao (1988) and Qiao & Lin (1998). Using the phase positions of the pulse components predicted by the ``beam-frequency figure'' of the ICS model, we present Gaussian fits to the multi-frequency pulse profiles for some pulsars. It is shown that the model can reproduce various types of the frequency evolution behaviors of pulse profiles observed.
Thalmayr, Florian; Hashimoto, Ken-Ya; Omori, Tatsuya; Yamaguchi, Masatsune
2010-07-01
This paper demonstrates a novel frequency domain analysis (FDA) to evaluate the scattering behavior of a waveguide mode at arbitrary scattering geometries by a time harmonic simulation based on the finite element method (FEM). To this end, we add an injection-damping mechanism (IDM) to avoid interference at the acoustic input port. The IDM can be easily constructed by a numerical operation. Our approach offers improved time consumption and calculation power necessary over the established method in the time domain. After checking the validity of the proposed method, we discuss the importance of considering wave scattering phenomena in film bulk acoustic wave resonator (FBAR) devices by applying the proposed method to two simplified models of an FBAR device.
High--Energy Photon--Hadron Scattering in Holographic QCD
Nishio, Ryoichi
2011-01-01
This article provides an in-depth look at hadron high energy scattering by using gravity dual descriptions of strongly coupled gauge theories. Just like deeply inelastic scattering (DIS) and deeply virtual Compton scattering (DVCS) serve as clean experimental probes into non-perturbative internal structure of hadrons, elastic scattering amplitude of a hadron and a (virtual) "photon" in gravity dual can be exploited as a theoretical probe. Since the scattering amplitude at sufficiently high energy (small Bjorken x) is dominated by parton contributions (= Pomeron contributions) even in strong coupling regime, there is a chance to learn a lesson for generalized parton distribution (GPD) by using gravity dual models. We begin with refining derivation of Brower-Polchinski-Strassler-Tan (BPST) Pomeron kernel in gravity dual, paying particular attention to the role played by complex spin variable j. The BPST Pomeron on warped spacetime consists of a Kaluza-Klein tower of 4D Pomerons with non-linear trajectories, and...
Impact of multiple frequency scattering on GNSS performance under adverse ionospheric conditions
Das, Aditi; Paul, Ashik
One of the major deterrents to successful implementation of SBAS may be linked to sharp latitudinal gradients of ionization occurring during the daytime and intense Space Weather events in the post sunset hours, affecting transionospheric satellite links particularly in the equatorial region. These phenomena have the potential to cause serious damage to the technological infrastructure on which society relies. GPS modernization program is focused on addition of a new navigation signal L5 to the GPS constellation. The L5 is exclusively reserved for aviation navigation services and is designed with a protected spectrum, higher power, and greater bandwidth to support life-critical and high performance applications. Overall robustness of this dual-frequency mechanism to ionospheric scintillations could be ascertained through a study of correlated scintillations. Understanding the correlation of signal fades across two frequencies is important to assess their collective mitigation effectiveness. The Indian Regional Navigational Satellite System (IRNSS) will operate at L1 (1575.42 MHz), L5 (1176.45 MHz) and S-band (2492.42 MHz) frequencies. A multi-constellation, multi-frequency GNSS receiver is operational at University of Calcutta, Calcutta, India (22.58deg N, 88.38deg E geographic; magnetic dip: 32deg N) since April 2013. Special emphasis was given to analyzing signals from satellite vehicles equipped to transmit L5 frequency. On April 12, 2013, amplitude scintillation and associated fluctuations in carrier-to-noise ratios (CNO) were noted on SV1 link during 14:15-14:50UT from Calcutta. The S4 indices at the three frequencies, L1, L2 and L5, were affected to different extent with L2 and L5 values showing close correspondence and L1 suffering least scintillations. Correlation coefficient of S4 and carrier-to-noise ratios (CNO) between different combination of frequencies (L1:L2, L2:L5; L1:L5) were calculated at 3 minutes interval during periods of scintillation. As L2
Baranov, A. N.; Butsen, A. V.; Ionin, A. A.; Ivanova, A. K.; Kuchmizhak, A. A.; Kudryashov, S. I.; Kudryavtseva, A. D.; Levchenko, A. O.; Rudenko, A. A.; Saraeva, I. N.; Strokov, M. A.; Tcherniega, N. V.; Zayarny, D. A.
2017-09-01
Hybrid plasmonic-dielectric nano- and (sub)microparticles exhibit magnetic and electrical dipolar Mie-resonances, which makes them useful as efficient basic elements in surface-enhanced spectroscopy, non-linear light conversion and nanoscale light control. We report the stimulated low-frequency Raman scattering (SLFRS) of a nanosecond ruby laser radiation (central wavelength λ = 694.3 nm (full-width at half-maximum ≈ 0.015 cm-1), gaussian 1/e-intensity pulsewidth τ ≈ 20 ns, TEM00-mode pulse energy Emax ≈ 0.3 J) in nanodiamond (R ≈ 120 nm) hydrosols, induced via optomechanical coherent excitation of fundamental breathing eigen-modes, and the two-fold enhancement of SLFRS in Ag-decorated nanodiamonds, characterized by hybrid dipolar resonances of electrical (silver) and magnetic (diamond) nature. Hybrid metal-dielectric particles were prepared by means of nanosecond IR-laser ablation of solid silver target in diamond hydrosols with consecutive Ag-capping of diamonds, and were characterized by scanning electron microscopy, UV-vis, photoluminescence and energy-dispersive X-ray spectroscopy. Intensities of the SLFR-scattered components and their size-dependent spectral shifts were measured in the highly sensitive stimulated scattering regime, indicating the high (≈ 30%) SLFRS conversion efficiency and the resonant character of the scattering species.
High frequency group pulse electrochemical machining
Institute of Scientific and Technical Information of China (English)
WU Gaoyang; ZHANG Zhijing; ZHANG Weimin; TANG Xinglun
2007-01-01
In the process of machining ultrathin metal structure parts,the signal composition of high frequency group pulse,the influence of frequency to reverse current,and the design of the cathode in high frequency group pulse electrochemical machining (HGPECM) are discussed.The experiments on process were carried out.Results indicate that HGPECM can greatly improve the characteristics of the inter-electrode gap flow field,reduce electrode passivation,and obtain high machining quality.The machining quality is obviously improved by increasing the main pulse frequency.The dimensional accuracy reaches 30-40 pro and the roughness attained is at 0.30-0.35 μm.High frequency group pulse electrochemical machining can be successfully used in machining micro-parts.
High Frequency Ground Motion from Finite Fault Rupture Simulations
Crempien, Jorge G. F.
There are many tectonically active regions on earth with little or no recorded ground motions. The Eastern United States is a typical example of regions with active faults, but with low to medium seismicity that has prevented sufficient ground motion recordings. Because of this, it is necessary to use synthetic ground motion methods in order to estimate the earthquake hazard a region might have. Ground motion prediction equations for spectral acceleration typically have geometric attenuation proportional to the inverse of distance away from the fault. Earthquakes simulated with one-dimensional layered earth models have larger geometric attenuation than the observed ground motion recordings. We show that as incident angles of rays increase at welded boundaries between homogeneous flat layers, the transmitted rays decrease in amplitude dramatically. As the receiver distance increases away from the source, the angle of incidence of up-going rays increases, producing negligible transmitted ray amplitude, thus increasing the geometrical attenuation. To work around this problem we propose a model in which we separate wave propagation for low and high frequencies at a crossover frequency, typically 1Hz. The high-frequency portion of strong ground motion is computed with a homogeneous half-space and amplified with the available and more complex one- or three-dimensional crustal models using the quarter wavelength method. We also make use of seismic coda energy density observations as scattering impulse response functions. We incorporate scattering impulse response functions into our Green's functions by convolving the high-frequency homogeneous half-space Green's functions with normalized synthetic scatterograms to reproduce scattering physical effects in recorded seismograms. This method was validated against ground motion for earthquakes recorded in California and Japan, yielding results that capture the duration and spectral response of strong ground motion.
Strong Coulomb scattering effects on low frequency noise in monolayer WS2 field-effect transistors
Joo, Min-Kyu; Yun, Yoojoo; Yun, Seokjoon; Lee, Young Hee; Suh, Dongseok
2016-10-01
When atomically thin semiconducting transition metal dichalcogenides are used as a channel material, they are inevitably exposed to supporting substrates. This situation can lead to masking of intrinsic properties by undesired extrinsic doping and/or additional conductance fluctuations from the largely distributed Coulomb impurities at the interface between the channel and the substrate. Here, we report low-frequency noise characteristics in monolayer WS2 field-effect transistors on silicon/silicon-oxide substrate. To mitigate the effect of extrinsic low-frequency noise sources, a nitrogen annealing was carried out to provide better interface quality and to suppress the channel access resistance. The carrier number fluctuation and the correlated mobility fluctuation (CNF-CMF) model was better than the sole CNF one to explain our low-frequency noise data, because of the strong Coulomb scattering effect on the effective mobility caused by carrier trapping/detrapping at oxide traps. The temperature-dependent field-effect mobility in the four-probe configuration and the Coulomb scattering parameters are presented to support this strong Coulomb scattering effect on carrier transport in monolayer WS2 field-effect transistor.
Redistribution of light frequency by multiple scattering in a resonant atomic vapor
Carvalho, J C de A; Oriá, M; Chevrollier, M; de Silans, T Passerat
2015-01-01
The propagation of light in a resonant atomic vapor can \\textit{a priori} be thought of as a multiple scattering process, in which each scattering event redistributes both the direction and the frequency of the photons. Particularly, the frequency redistribution may result in L\\'evy flights of photons, directly affecting the transport properties of light in a resonant atomic vapor and turning this propagation into a superdifusion process. Here, we report on a Monte-Carlo simulation developed to study the evolution of the spectrum of the light in a resonant thermal vapor. We observe the gradual change of the spectrum and its convergence towards a regime of Complete Frequency Redistribution as the number of scattering events increases. We also analyse the probability density function of the step length of photons between emissions and reabsorptions in the vapor, which governs the statistics of the light diffusion. We observe two different regime in the light transport: superdiffusive when the vapor is excited n...
High frequency dynamics in centrifugal compressors
Twerda, A.; Meulendijks, D.; Smeulers, J.P.M.; Handel, R. van den; Lier, L.J. van
2008-01-01
Problems with centrifugal compressors relating to high frequency, i.e. Blade passing frequency (BPF) are increasing. Pulsations and vibrations generated in centrifugal compressors can lead to nuisance, due to strong tonal noise, and even breakdown. In several cases the root cause of a failure or a
High frequency dynamics in centrifugal compressors
Twerda, A.; Meulendijks, D.; Smeulers, J.P.M.; Handel, R. van den; Lier, L.J. van
2008-01-01
Problems with centrifugal compressors relating to high frequency, i.e. Blade passing frequency (BPF) are increasing. Pulsations and vibrations generated in centrifugal compressors can lead to nuisance, due to strong tonal noise, and even breakdown. In several cases the root cause of a failure or a n
Bahcivan, H.; Cosgrove, R. B.; Tsunoda, R. T.
2006-07-01
This article investigates the combined electron heating and streaming effects of low-frequency parallel electric fields on the incoherent scatter measurements of the high-latitude E region. The electric fields distort the electron distribution function, inducing changes on the amplitude and frequency of the ion-acoustic line in the measured incoherent scatter spectrum. If one assumes Maxwellian electrons, the measurements of electron and ion temperatures and electron density are subject to significant percentage errors during geomagnetically active conditions.
Overview of the Advanced High Frequency Branch
Miranda, Felix A.
2015-01-01
This presentation provides an overview of the competencies, selected areas of research and technology development activities, and current external collaborative efforts of the NASA Glenn Research Center's Advanced High Frequency Branch.
High Energy Single Frequency Resonant Amplifier Project
National Aeronautics and Space Administration — This SBIR phase I project proposes a single frequency high energy resonant amplifier for remote sensing. Current state-of-art technologies can not provide all...
Directional Fano Resonances at Light Scattering by a High Refractive Index Dielectric Sphere
Tribelsky, Michael I; Litman, Amelie; Eyraud, Christelle; Moreno, Fernando
2016-01-01
In this research, we report the experimental evidence of the directional Fano resonances at the scattering of a plane, linearly polarized electromagnetic wave by a homogeneous dielectric sphere with high refractive index and low losses. We observe a typical asymmetric Fano profile for the intensity scattered in, practically, any given direction, while the overall extinction cross section remains Lorentzian. The phenomenon is originated in the interference of the selectively excited electric dipolar and quadrupolar modes. The selectivity of the excitation is achieved by the proper choice of the frequency of the incident wave. Thanks to the scaling invariance of the Maxwell equations, in these experiments we mimic the scattering of the visible and near IR radiation by a nanoparticle made of common superconductor materials (Si, Ge, GaAs, GaP) by the equivalent scattering of a spherical particle of 18 mm in diameter in the microwave range. The theory developed to explain the experiments extends the conventional F...
High resolution inverse scattering in two dimensions using recursive linearization
Borges, Carlos; Greengard, Leslie
2016-01-01
We describe a fast, stable algorithm for the solution of the inverse acoustic scattering problem in two dimensions. Given full aperture far field measurements of the scattered field for multiple angles of incidence, we use Chen's method of recursive linearization to reconstruct an unknown sound speed at resolutions of thousands of square wavelengths in a fully nonlinear regime. Despite the fact that the underlying optimization problem is formally ill-posed and non-convex, recursive linearization requires only the solution of a sequence of linear least squares problems at successively higher frequencies. By seeking a suitably band-limited approximation of the sound speed profile, each least squares calculation is well-conditioned and involves the solution of a large number of forward scattering problems, for which we employ a recently developed, spectrally accurate, fast direct solver. For the largest problems considered, involving 19,600 unknowns, approximately one million partial differential equations were ...
Frequency-Dependent Scattering Observed in P- and Surface-Wave Arrivals From South India
Rai, A. K.
2017-03-01
Anomalies in polarization angles of teleseismic waves have been used to understand effect of scattered arrivals from subsurface heterogeneities. Seismological data recorded in southern India show polarization anomalies up to 5° for several stations. These anomalies are most pronounced for earthquakes from western and southern azimuths. Furthermore, stations located near the boundary of Dharwar craton and southern Granulites are more affected by scattered waves. Considering that many of the nearby stations show similar patterns of polarization anomalies, it is likely that the source of scattered energy is located at shallower depths. The non-stationary nature of seismic arrivals warrants determination of frequency-dependent polarization. Result obtained using multi-taper spectral analysis method indicates that data are contaminated at frequencies greater than 2 Hz for most of the stations. Furthermore, surface-wave records also indicate off-azimuth arrivals, and quasi-Love waves indicating heterogeneities or anisotropy in the subsurface. These small-scale heterogeneities that may be located in crust may be important for studies using converted phases and ground motion prediction studies.
Frequency-Dependent Scattering Observed in P- and Surface-Wave Arrivals From South India
Rai, A. K.
2016-12-01
Anomalies in polarization angles of teleseismic waves have been used to understand effect of scattered arrivals from subsurface heterogeneities. Seismological data recorded in southern India show polarization anomalies up to 5° for several stations. These anomalies are most pronounced for earthquakes from western and southern azimuths. Furthermore, stations located near the boundary of Dharwar craton and southern Granulites are more affected by scattered waves. Considering that many of the nearby stations show similar patterns of polarization anomalies, it is likely that the source of scattered energy is located at shallower depths. The non-stationary nature of seismic arrivals warrants determination of frequency-dependent polarization. Result obtained using multi-taper spectral analysis method indicates that data are contaminated at frequencies greater than 2 Hz for most of the stations. Furthermore, surface-wave records also indicate off-azimuth arrivals, and quasi-Love waves indicating heterogeneities or anisotropy in the subsurface. These small-scale heterogeneities that may be located in crust may be important for studies using converted phases and ground motion prediction studies.
Synthesis of aerogel tiles with high light scattering length
Danilyuk, A F; Okunev, A G; Onuchin, A P; Shaurman, S A
1999-01-01
The possibility of aerogel tiles production for RICH detectors is described. Monolithic blocks of silica aerogel were synthesized by two-step sol-gel processing of tetraethoxysilane Si(OEt) sub 4 followed by high temperature supercritical drying with organic solvent. The important characteristic of aerogel is the light scattering length. In the wide range of refraction indexes the light scattering length exceeds 4 cm at 400 nm.
High resolution inelastic electron scattering and nuclear structure
Blok, H. B.; Heisenberg, J. H.
Thanks to the improved characteristics of the experimental set-up electron scattering has become an excellent tool to study the structure of the nucleus. After describing globally how the nuclear structure enters in the formalism of (e,e') reactions and how the high experimental resolution is obtained, several examples of the use of electron scattering for the study of specific nuclear structure questions are discussed.
Parity nonconservation in polarized electron scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Prescott, C.Y.
1979-10-01
Recent observations of parity violation in inelastic scattering of electrons at high energy is discussed with reference to the process e(polarized) + D(unpolarized) ..-->.. e + X. The kinetics of this process, the idealized case of scattering from free quark targets, experimental techniques and results, and relations to atomic physics of parity violation in bismuth and thallium atoms with a model independent analysis. 17 references. (JFP)
High energy scattering in 2+1 QCD
Li, Maozhen; Miao Li; Chung-I Tan
1994-01-01
High energy scattering in 2+1 QCD is studied using the recent approach of Verlinde and Verlinde. We calculate the color singlet part of the quark-quark scattering exactly within this approach, and discuss some physical implication of this result. We also demonstrate, by two independent methods, that reggeization fails for the color singlet channel. We briefly comment on the problem in 3+1 QCD.
High frequency conductivity in carbon nanotubes
Directory of Open Access Journals (Sweden)
S. S. Abukari
2012-12-01
Full Text Available We report on theoretical analysis of high frequency conductivity in carbon nanotubes. Using the kinetic equation with constant relaxation time, an analytical expression for the complex conductivity is obtained. The real part of the complex conductivity is initially negative at zero frequency and become more negative with increasing frequency, until it reaches a resonance minimum at ω ∼ ωB for metallic zigzag CNs and ω < ωB for armchair CNs. This resonance enhancement is indicative for terahertz gain without the formation of current instabilities induced by negative dc conductivity. We noted that due to the high density of states of conduction electrons in metallic zigzag carbon nanotubes and the specific dispersion law inherent in hexagonal crystalline structure result in a uniquely high frequency conductivity than the corresponding values for metallic armchair carbon nanotubes. We suggest that this phenomenon can be used to suppress current instabilities that are normally associated with a negative dc differential conductivity.
Unified approach to cascaded stimulated Brillouin scattering and frequency-comb generation
Dong, Mark; Winful, Herbert G.
2016-04-01
We present a unified approach to cascaded stimulated Brillouin scattering and frequency-comb generation in which the multitude of interacting pump, Stokes, and anti-Stokes optical fields is described by a single forward wave and a single backward wave at a single carrier frequency. The envelopes of these two waves are modulated through coupling to a single acoustic oscillation and through four-wave mixing. Starting from a single pump field, we observe the emergence of a comb of frequencies as the intensity is increased. The set of three differential equations derived here is sufficient to describe the generation of any number of Brillouin sidebands in oscillator systems that would have required hundreds of coupled equations in the standard approach. We test this approach on some published experiments and find excellent agreement with the results.
Deuteron-deuteron elastic scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Fazal-e-Aleem; Ali, S. (Univ. of the Punjab, Lahore (Pakistan))
1991-04-01
The eikonal picture which has theoretical foundations in some areas of physics has been successful in explaining various aspects of elastic scattering at high energies. Chou and Yang first proposed a preliminary version of the eikonal model for hadron-hadron elastic scattering. The model is based on geometrical considerations in which hadrons are treated as extended objects. Elastic scattering then results from the propagation of attenuated wave function. By assuming that at high energies the scattering amplitude is purely imaginary and that the hadronic matter distribution is proportional to the charge distribution on protons, Durand and Lipes studied high energy pp scattering on the basis of this prestine model. Later on, the model was extended to other elastic reactions. However, a survey of literature shows that it has been successful only in the diffraction peak region. It has been shown that the pristine Chou-Yange model can explain the differential cross section for deuteron-deuteron elastic scattering at {radical}s = 53 GeV in the diffraction peak region. In order to fit the large momentum transfer data, the generalized Chou-Yang model is used.
High Precision Measurements Using High Frequency Signals
Jin, Aohan; Sakurai, Atsunori; Liu, Liang; Edman, Fredrik; Öwall, Viktor; Pullerits, Tonu; Karki, Khadga J
2014-01-01
Generalized lock-in amplifiers use digital cavities with Q-factors as high as 5X10^8. In this letter, we show that generalized lock-in amplifiers can be used to analyze microwave (giga-hertz) signals with a precision of few tens of hertz. We propose that the physical changes in the medium of propagation can be measured precisely by the ultra-high precision measurement of the signal. We provide evidence to our proposition by verifying the Newton's law of cooling by measuring the effect of change in temperature on the phase and amplitude of the signals propagating through two calibrated cables. The technique could be used to precisely measure different physical properties of the propagation medium, for example length, resistance, etc. Real time implementation of the technique can open up new methodologies of in-situ virtual metrology in material design.
Energy Technology Data Exchange (ETDEWEB)
Artemyev, A. V., E-mail: ante0226@gmail.com [Space Research Institute, RAS, Moscow (Russian Federation); Mourenas, D.; Krasnoselskikh, V. V. [LPC2E/CNRS - University of Orleans, Orleans (France); Agapitov, O. V. [Space Sciences Laboratory, University of California, Berkeley, California 94720 (United States)
2015-06-15
In this paper, we study relativistic electron scattering by fast magnetosonic waves. We compare results of test particle simulations and the quasi-linear theory for different spectra of waves to investigate how a fine structure of the wave emission can influence electron resonant scattering. We show that for a realistically wide distribution of wave normal angles θ (i.e., when the dispersion δθ≥0.5{sup °}), relativistic electron scattering is similar for a wide wave spectrum and for a spectrum consisting in well-separated ion cyclotron harmonics. Comparisons of test particle simulations with quasi-linear theory show that for δθ>0.5{sup °}, the quasi-linear approximation describes resonant scattering correctly for a large enough plasma frequency. For a very narrow θ distribution (when δθ∼0.05{sup °}), however, the effect of a fine structure in the wave spectrum becomes important. In this case, quasi-linear theory clearly fails in describing accurately electron scattering by fast magnetosonic waves. We also study the effect of high wave amplitudes on relativistic electron scattering. For typical conditions in the earth's radiation belts, the quasi-linear approximation cannot accurately describe electron scattering for waves with averaged amplitudes >300 pT. We discuss various applications of the obtained results for modeling electron dynamics in the radiation belts and in the Earth's magnetotail.
Adaptive eigenspace method for inverse scattering problems in the frequency domain
Grote, Marcus J.; Kray, Marie; Nahum, Uri
2017-02-01
A nonlinear optimization method is proposed for the solution of inverse scattering problems in the frequency domain, when the scattered field is governed by the Helmholtz equation. The time-harmonic inverse medium problem is formulated as a PDE-constrained optimization problem and solved by an inexact truncated Newton-type iteration. Instead of a grid-based discrete representation, the unknown wave speed is projected to a particular finite-dimensional basis of eigenfunctions, which is iteratively adapted during the optimization. Truncating the adaptive eigenspace (AE) basis at a (small and slowly increasing) finite number of eigenfunctions effectively introduces regularization into the inversion and thus avoids the need for standard Tikhonov-type regularization. Both analytical and numerical evidence underpins the accuracy of the AE representation. Numerical experiments demonstrate the efficiency and robustness to missing or noisy data of the resulting adaptive eigenspace inversion method.
Extremely high frequency RF effects on electronics.
Energy Technology Data Exchange (ETDEWEB)
Loubriel, Guillermo Manuel; Vigliano, David; Coleman, Phillip Dale; Williams, Jeffery Thomas; Wouters, Gregg A.; Bacon, Larry Donald; Mar, Alan
2012-01-01
The objective of this work was to understand the fundamental physics of extremely high frequency RF effects on electronics. To accomplish this objective, we produced models, conducted simulations, and performed measurements to identify the mechanisms of effects as frequency increases into the millimeter-wave regime. Our purpose was to answer the questions, 'What are the tradeoffs between coupling, transmission losses, and device responses as frequency increases?', and, 'How high in frequency do effects on electronic systems continue to occur?' Using full wave electromagnetics codes and a transmission-line/circuit code, we investigated how extremely high-frequency RF propagates on wires and printed circuit board traces. We investigated both field-to-wire coupling and direct illumination of printed circuit boards to determine the significant mechanisms for inducing currents at device terminals. We measured coupling to wires and attenuation along wires for comparison to the simulations, looking at plane-wave coupling as it launches modes onto single and multiconductor structures. We simulated the response of discrete and integrated circuit semiconductor devices to those high-frequency currents and voltages, using SGFramework, the open-source General-purpose Semiconductor Simulator (gss), and Sandia's Charon semiconductor device physics codes. This report documents our findings.
Ainslie, M.A.; Leighton, T.G.
2011-01-01
Perhaps the most familiar concepts when discussing acoustic scattering by bubbles are the resonance frequency for bubble pulsation, the bubbles' damping, and their scattering and extinction cross-sections, all of which are used routinely in oceanography, sonochemistry, and biomedicine. The apparent
Observations of solar scattering polarization at high spatial resolution
Snik, F; Ichimoto, K; Fischer, C E; Keller, C U; Lites, B W
2010-01-01
The weak, turbulent magnetic fields that supposedly permeate most of the solar photosphere are difficult to observe, because the Zeeman effect is virtually blind to them. The Hanle effect, acting on the scattering polarization in suitable lines, can in principle be used as a diagnostic for these fields. However, the prediction that the majority of the weak, turbulent field resides in intergranular lanes also poses significant challenges to scattering polarization observations because high spatial resolution is usually difficult to attain. We aim to measure the difference in scattering polarization between granules and intergranules. We present the respective center-to-limb variations, which may serve as input for future models. We perform full Stokes filter polarimetry at different solar limb positions with the CN band filter of the Hinode-SOT Broadband Filter Imager, which represents the first scattering polarization observations with sufficient spatial resolution to discern the granulation. Hinode-SOT offer...
Evolution of Very High Frequency Power Supplies
DEFF Research Database (Denmark)
Knott, Arnold; Andersen, Toke Meyer; Kamby, Peter
2013-01-01
in radio frequency transmission equipment helps to overcome those. However those circuits were not designed to meet the same requirements as power converters. This paper summarizes the contributions in recent years in application of very high frequency (VHF) technologies in power electronics, shows results......The ongoing demand for smaller and lighter power supplies is driving the motivation to increase the switching frequencies of power converters. Drastic increases however come along with new challenges, namely the increase of switching losses in all components. The application of power circuits used...
Aurally-adequate time-frequency analysis for scattered sound in auditoria
Norris, Molly K.; Xiang, Ning; Kleiner, Mendel
2005-04-01
The goal of this work was to apply an aurally-adequate time-frequency analysis technique to the analysis of sound scattering effects in auditoria. Time-frequency representations were developed as a motivated effort that takes into account binaural hearing, with a specific implementation of interaural cross-correlation process. A model of the human auditory system was implemented in the MATLAB platform based on two previous models [A. Härmä and K. Palomäki, HUTear, Espoo, Finland; and M. A. Akeroyd, A. Binaural Cross-correlogram Toolbox for MATLAB (2001), University of Sussex, Brighton]. These stages include proper frequency selectivity, the conversion of the mechanical motion of the basilar membrane to neural impulses, and binaural hearing effects. The model was then used in the analysis of room impulse responses with varying scattering characteristics. This paper discusses the analysis results using simulated and measured room impulse responses. [Work supported by the Frank H. and Eva B. Buck Foundation.
High Sensitivity, High Frequency and High Time Resolution Decimetric Spectroscope
Sawant, H. S.; Rosa, R. R.
1990-11-01
RESUMEN. Se ha desarrollado el primer espectroscopio decimetrico latino americano operando en una banda de 100 MHz con alta resoluci6n de fre- cuencia (100 KHz) y tiempo (10 ms), alrededor de cualquier centro de frecuencia en el intervalo de 2000-200 MHz. El prop6sito de esta nota es describir investigaciones solares y no solares que se planean, progra ma de investigaci6n y la situaci6n actual de desarrollo de este espectroscopio. ABSTRACT. First Latin American Decimetric Spectroscope operating over a band of 100 MHz with high resolution in frequency (100 KHz) and time (10 ms), around any center frequency in the range of 2000-200 MHz is being developed. The purpose of this note is to describe planned solar, and non-solar, research programmes and present status of development of this spectroscope. Keq wo : INSTRUMENTS - SPECTROSCOPY
Extremely high-frequency micro-Doppler measurements of humans
Hedden, Abigail S.; Silvious, Jerry L.; Dietlein, Charles R.; Green, Jeremy A.; Wikner, David A.
2014-05-01
The development of sensors that are capable of penetrating smoke, dust, fog, clouds, and rain is critical for maintaining situational awareness in degraded visual environments and for providing support to the Warfighter. Atmospheric penetration properties, the ability to form high-resolution imagery with modest apertures, and available source power make the extremely high-frequency (EHF) portion of the spectrum promising for the development of radio frequency (RF) sensors capable of penetrating visual obscurants. Comprehensive phenomenology studies including polarization and backscatter properties of relevant targets are lacking at these frequencies. The Army Research Laboratory (ARL) is developing a fully-polarimetric frequency-modulated continuous-wave (FMCW) instrumentation radar to explore polarization and backscatter properties of in-situ rain, scattering from natural and man-made surfaces, and the radar cross section and micro-Doppler signatures of humans at EHF frequencies, specifically, around the 220 GHz atmospheric window. This work presents an overview of the design and construction of the radar system, hardware performance, data acquisition software, and initial results including an analysis of human micro-Doppler signatures.
Investigation of high-frequency pipe welding
Konovalov, Nikolai A.; Lakhno, Nikolay I.; Gushchin, A. G.; Putryk, N. D.; Kovalenko, Vladimir I.; Galkina, V. A.; Veselovsky, Vladimir B.; Furmanov, Valeri B.; Kovika, Nikolai D.; Novikov, Leonid V.; Shcherbina, V. N.
1993-01-01
For investigation of a pipe welding process at high-frequency heating aimed at increasing of pipe quality and decreasing of spoilage, the use of high-speed recording and TV-technique is considered to be effective. The authors have created a visual inspection system for pipe welding process studies at a tube mill of the Novomoskovsk Pipe Plant.
High-Order Frequency-Locked Loops
DEFF Research Database (Denmark)
Golestan, Saeed; Guerrero, Josep M.; Quintero, Juan Carlos Vasquez
2017-01-01
In very recent years, some attempts for designing high-order frequency-locked loops (FLLs) have been made. Nevertheless, the advantages and disadvantages of these structures, particularly in comparison with a standard FLL and high-order phase-locked loops (PLLs), are rather unclear. This lack......) as well as a unification between FLLs and PLLs is presented....
Frequency translation via four-wave mixing Bragg scattering in Rb filled photonic bandgap fibers.
Donvalkar, Prathamesh S; Venkataraman, Vivek; Clemmen, Stéphane; Saha, Kasturi; Gaeta, Alexander L
2014-03-15
We demonstrate frequency translation at microwatt pump power levels in Rubidium vapor confined to a hollow-core photonic bandgap fiber using four-wave mixing Bragg scattering. The 5S(1/2)→5D(3/2) two-photon transition in 85Rb is employed for the four-wave mixing process. Using continuous-wave pump beams at 780 and 795 nm, a weak signal beam at 776 nm is translated to a wavelength of 762 nm with a 21% conversion efficiency at pump powers of 300 μW.
Cross-polarization scattering from low-frequency waves in a tandem mirror plasma
Energy Technology Data Exchange (ETDEWEB)
Kogi, Yuichiro; Mase, Atsushi; Bruskin, L.G.; Oyama, Naoyuki; Tokuzawa, Tokihiko; Itakura, Akiyosi; Hojo, Hitoshi; Tamano, Teruo [Tsukuba Univ., Ibaraki (Japan). Plasma Research Center
1997-05-01
Cross-polarization scattering (CPS) diagnostic was applied to the central-cell plasma of the GAMMA 10 tandem mirror in order to study electromagnetic plasma waves with frequencies of less than 200 kHz. In the CPS process, an incident ordinary (extraordinary) wave is converted to an extraordinary (ordinary) wave by magnetic fluctuations in a plasma. The converted wave propagates through the cutoff layer and reaches the opposite diagnostic port. The experimental data suggest that the power spectral density of the CPS signal satisfies the Bragg condition, while the reflectometer detects the waves near the cutoff layer where the wave number cannot be resolved. (author)
Influence of a high-speed dielectric spherical particle's movement on its scattering characteristics
Institute of Scientific and Technical Information of China (English)
Mingjun Wang; Zhensen Wu; Yingle Li
2007-01-01
The scattered field and differential scattered section (DSS) of a moving spherical particle with a high speed are investigated numerically. The coordinate and vector transformations are used to establish a theoretical basis for studying the laser scattering of a moving particle. The DSS of a moving spherical particle is explained by the electric and magnetic field from Mie scattering theory. Assuming the laser wavelength of 1.06 μm, we compute the ratio of the laser DSS of the moving dielectric spherical particle to that of the static dielectric spherical particle, which changes with radii, speeds and scattering angles of the particle. The numerical results show that the laser DSS of the oving pherical particle is tightly connected with its speed and scattering zenith angle. If a spherical particle moves with high speed, the laser DSS due to movement of the particle could not be neglected. If the speed of the dielectric spherical particle is fluctuating, the Doppler effect and the frequency spectrum expansion play important roles.
High frequency III-V nanowire MOSFETs
Lind, Erik
2016-09-01
III-V nanowire transistors are promising candidates for very high frequency electronics applications. The improved electrostatics originating from the gate-all-around geometry allow for more aggressive scaling as compared with planar field-effect transistors, and this can lead to device operation at very high frequencies. The very high mobility possible with In-rich devices can allow very high device performance at low operating voltages. GaN nanowires can take advantage of the large band gap for high voltage operation. In this paper, we review the basic physics and device performance of nanowire field- effect transistors relevant for high frequency performance. First, the geometry of lateral and vertical nanowire field-effect transistors is introduced, with special emphasis on the parasitic capacitances important for nanowire geometries. The basic important high frequency transistor metrics are introduced. Secondly, the scaling properties of gate-all-around nanowire transistors are introduced, based on geometric length scales, demonstrating the scaling possibilities of nanowire transistors. Thirdly, to model nanowire transistor performance, a two-band non-parabolic ballistic transistor model is used to efficiently calculate the current and transconductance as a function of band gap and nanowire size. The intrinsic RF metrics are also estimated. Finally, experimental state-of-the-art nanowire field-effect transistors are reviewed and benchmarked, lateral and vertical transistor geometries are explored, and different fabrication routes are highlighted. Lateral devices have demonstrated operation up to 350 GHz, and vertical devices up to 155 GHz.
Large volume high-pressure cell for inelastic neutron scattering
Energy Technology Data Exchange (ETDEWEB)
Wang, W.; Kamenev, K. V. [Centre for Science at Extreme Conditions and School of Engineering, University of Edinburgh, Edinburgh EH9 3JZ (United Kingdom); Sokolov, D. A.; Huxley, A. D. [SUPA, Centre for Science at Extreme Conditions and School of Physics and Astronomy, University of Edinburgh, Edinburgh EH9 3JZ (United Kingdom)
2011-07-15
Inelastic neutron scattering measurements typically require two orders of magnitude longer data collection times and larger sample sizes than neutron diffraction studies. Inelastic neutron scattering measurements on pressurised samples are particularly challenging since standard high-pressure apparatus restricts sample volume, attenuates the incident and scattered beams, and contributes background scattering. Here, we present the design of a large volume two-layered piston-cylinder pressure cell with optimised transmission for inelastic neutron scattering experiments. The design and the materials selected for the construction of the cell enable its safe use to a pressure of 1.8 GPa with a sample volume in excess of 400 mm{sup 3}. The design of the piston seal eliminates the need for a sample container, thus providing a larger sample volume and reduced absorption. The integrated electrical plug with a manganin pressure gauge offers an accurate measurement of pressure over the whole range of operational temperatures. The performance of the cell is demonstrated by an inelastic neutron scattering study of UGe{sub 2}.
Large volume high-pressure cell for inelastic neutron scattering
Wang, W.; Sokolov, D. A.; Huxley, A. D.; Kamenev, K. V.
2011-07-01
Inelastic neutron scattering measurements typically require two orders of magnitude longer data collection times and larger sample sizes than neutron diffraction studies. Inelastic neutron scattering measurements on pressurised samples are particularly challenging since standard high-pressure apparatus restricts sample volume, attenuates the incident and scattered beams, and contributes background scattering. Here, we present the design of a large volume two-layered piston-cylinder pressure cell with optimised transmission for inelastic neutron scattering experiments. The design and the materials selected for the construction of the cell enable its safe use to a pressure of 1.8 GPa with a sample volume in excess of 400 mm3. The design of the piston seal eliminates the need for a sample container, thus providing a larger sample volume and reduced absorption. The integrated electrical plug with a manganin pressure gauge offers an accurate measurement of pressure over the whole range of operational temperatures. The performance of the cell is demonstrated by an inelastic neutron scattering study of UGe2.
Simple high-pressure cell for neutron scattering
Bao, Wei; Broholm, C.; Trevino, S. F.
1995-02-01
A high-pressure cell, capable of 8 kbar, is developed for neutron scattering. It can be used with ILL type orange cryostats to obtain a temperature as low as 1.5 K. The simple seal design described here can easily be adopted to other high-pressure applications.
Time-frequency analysis of the bistatic acoustic scattering from a spherical elastic shell.
Anderson, Shaun D; Sabra, Karim G; Zakharia, Manell E; Sessarego, Jean-Pierre
2012-01-01
The development of low-frequency sonar systems, using, for instance, a network of autonomous systems in unmanned vehicles, provides a practical means for bistatic measurements (i.e., when the source and receiver are widely separated) allowing for multiple viewpoints of the target of interest. Time-frequency analysis, in particular, Wigner-Ville analysis, takes advantage of the evolution time dependent aspect of the echo spectrum to differentiate a man-made target, such as an elastic spherical shell, from a natural object of the similar shape. A key energetic feature of fluid-loaded and thin spherical shell is the coincidence pattern, also referred to as the mid-frequency enhancement (MFE), that results from antisymmetric Lamb-waves propagating around the circumference of the shell. This article investigates numerically the bistatic variations of the MFE with respect to the monostatic configuration using the Wigner-Ville analysis. The observed time-frequency shifts of the MFE are modeled using a previously derived quantitative ray theory by Zhang et al. [J. Acoust. Soc. Am. 91, 1862-1874 (1993)] for spherical shell's scattering. Additionally, the advantage of an optimal array beamformer, based on joint time delays and frequency shifts is illustrated for enhancing the detection of the MFE recorded across a bistatic receiver array when compared to a conventional time-delay beamformer.
High-frequency micromechanical columnar resonators
Directory of Open Access Journals (Sweden)
Jenny Kehrbusch, Elena A Ilin, Peter Bozek, Bernhard Radzio and Egbert Oesterschulze
2009-01-01
Full Text Available High-frequency silicon columnar microresonators are fabricated using a simple but effective technological scheme. An optimized fabrication scheme was invented to obtain mechanically protected microcolumns with lateral dimensions controlled on a scale of at least 1 μm. In this paper, we investigate the influence of the environmental conditions on the mechanical resonator properties. At ambient conditions, we observed a frequency stability δf/f of less than 10−6 during 5 h of operation at almost constant temperature. However, varying the temperature shifts the frequency by approximately −173 Hz °C− 1. In accordance with a viscous damping model of the ambient gas, we perceived that the quality factor of the first flexural mode decreased with the inverse of the square root of pressure. However, in the low-pressure regime, a linear dependence was observed. We also investigated the influence of the type of the immersing gas on the resonant frequency.
Richmond, J. H.
1974-01-01
Piecewise-sinusoidal expansion functions and Galerkin's method are employed to formulate a solution for an arbitrary thin-wire configuration in a homogeneous conducting medium. The analysis is performed in the real or complex frequency domain. In antenna problems, the solution determines the current distribution, impedance, radiation efficiency, gain and far-field patterns. In scattering problems, the solution determines the absorption cross section, scattering cross section and the polarization scattering matrix. The electromagnetic theory is presented for thin wires and the forward-scattering theorem is developed for an arbitrary target in a homogeneous conducting medium.
Stimulated low-frequency Raman scattering in a suspension of tobacco mosaic virus
Karpova, O. V.; Kudryavtseva, A. D.; Lednev, V. N.; Mironova, T. V.; Oshurko, V. B.; Pershin, S. M.; Petrova, E. K.; Tcherniega, N. V.; Zemskov, K. I.
2016-08-01
The interaction of laser pulses with tobacco mosaic virus (TMV) in Tris-HCl pH7.5 buffer and in water has been investigated. Ruby laser pulses of 20 ns duration have been used for excitation. The spectrum of the light passing through the sample was registered with the help of a Fabry-Perot interferometer. In the case of TMV in water we observed in the spectrum only one line of the exciting laser light, but for TMV in Tris-HCl pH7.5 buffer a second line appeared, corresponding to stimulated low-frequency Raman scattering (SLFRS) on the breathing radial mode of TMV. The frequency shift of the SLFRS by 2 cm-1 (60 GHz), the conversion efficiency and the threshold are measured for the first time to the best of our knowledge.
Stimulated low-frequency Raman scattering in tobacco mosaic virus suspension
Karpova, O V; Lednev, V N; Mironova, T V; Oshurko, V B; Pershin, S M; Petrova, E K; Tcherniega, N V; Zemskov, K I
2016-01-01
Laser pulses interaction with tobacco mosaic virus (TMV) in Tris-HCl pH7.5 buffer and in water has been investigated. 20 ns ruby laser pulses have been used for excitation. Spectrum of the light passing through the sample was registered with the help of Fabri-Perot interferometer. In the case of TMV in water we observed in the spectrum only one line of the exciting laser light, for TMV in Tris-HCl pH7.5 buffer second line appeared, corresponding to the stimulated low-frequency Raman scattering (SLFRS) on the breathing radial mode of TMV. SLFRS frequency shift by 2 cm-1, (60 GHz), conversion efficiency and threshold are measured for the first time to the best of our knowledge.
Schoenbeck, N. L.; Dowd, A. S.; Fonck, R. J.; Schlossberg, D. J.; Winz, G. R.
2012-10-01
A novel Thomson scattering system has been deployed on the Pegasus Toroidal Experiment. It provides a relatively low-cost, simplified design. Scattering is achieved using a 7 ns, 2 J frequency doubled Nd:YAG laser operating at 532 nm. The laser focuses to ˜3 mm diameter within the plasma via a 7 m beam-line. The beam-line contains cameras as beam finders and remotely adjustable mirrors for shot-to-shot alignment. A custom multi-element lens collects scattered photons from 15 cm 40%) image intensified CCD (ICCD) camera. Three spectrometers provide a total of 24 channels. Two interchangeable gratings exist to cover low (Te = 10--100 eV) and high (Te = 0.10--1 keV) electron temperature regimes on Pegasus. The spectrometer is optimized for ne from mid-10^18 to mid-10^19 m-3. The signal-to-noise expected is ˜0.5 of an equivalent system using Nd:YAG at 1064 nm and avalanche photodiode detectors.
Goforth, Matthew; Traverso, Peter; Maurer, David
2013-10-01
To better understand the equilibrium and stability of Compact Toroidal Hybrid (CTH) plasmas, a multipoint Thomson scattering system is under development at Auburn University. Thomson scattering will be performed at 532 nm using a frequency doubled Continuum PL DLS Nd:YAG laser. The Thomson scattered light will be measured using a high throughput HoloSpec f/1.8i imaging spectrograph with in-line interference filter for spectral discrimination of stray laser light. An image intensified charge coupled device (ICCD) camera employing a Gen III photocathode with quantum efficiency of approximately 50% near the frequency doubled laser line is planned as the detection element for the scattered light. Bench and CTH impurity line emission measurements will be presented quantifying spectrometer and ICCD performance and suitability for scattering measurements over the visible spectral region near 532 nm. This work has been supported by US Department of Energy Grant No. DE-FG02-00ER54610 and the Auburn University Undergraduate Research Fellowship Program.
High pressure Raman scattering of silicon nanowires
Energy Technology Data Exchange (ETDEWEB)
Khachadorian, Sevak; Scheel, Harald; Thomsen, Christian [Institut fuer Festkoerperphysik, Technische Universitaet Berlin, 10623 Berlin (Germany); Papagelis, Konstantinos [Materials Science Department, University of Patras, 26504 Patras (Greece); Colli, Alan [Nokia Research Centre, 21 J J Thomson Avenue, Cambridge CB3 0FA (United Kingdom); Ferrari, Andrea C, E-mail: khachadorian@physik.tu-berlin.de [Department of Engineering, University of Cambridge, Cambridge CB3 0FA (United Kingdom)
2011-05-13
We study the high pressure response, up to 8 GPa, of silicon nanowires (SiNWs) with {approx} 15 nm diameter, by Raman spectroscopy. The first order Raman peak shows a superlinear trend, more pronounced compared to bulk Si. Combining transmission electron microscopy and Raman measurements we estimate the SiNWs' bulk modulus and the Grueneisen parameters. We detect an increase of Raman linewidth at {approx} 4 GPa, and assign it to pressure induced activation of a decay process into LO and TA phonons. This pressure is smaller compared to the {approx} 7 GPa reported for bulk Si. We do not observe evidence of phase transitions, such as discontinuities or change in the pressure slopes, in the investigated pressure range.
Jiao, J. P.; Drinkwater, B. W.; Neild, S. A.; Wilcox, P. D.
2009-06-01
Guided wave structural health monitoring offers the prospect of continuous interrogation of large plate-like structures with a sparse network of permanently attached sensors. Currently, the most common approach is to monitor changes in the received signals by subtraction from a reference signal obtained when the structure was known to be defect-free. In this paper a comparison is made between this defect-free subtraction approach and a technique in which low-frequency vibration modulation of guided wave signals is used to detect nonlinear scatterers. The modulation technique potentially overcomes the need for the defect-free reference measurement as the subtraction is now made between different parts of an externally applied low-frequency vibration. Linear defects were simulated by masses bonded onto a plate and nonlinear scatterers were simulated by loading a similar mass against the plate. The experimental results show that the defect-free subtraction technique performs well in detecting the bonded mass whereas the modulation technique is able to discriminate between the bonded and loaded masses. Furthermore, because the modulation technique does not require a defect-free reference, it is shown to be relatively independent of temperature effects, a significant problem for reference based subtraction techniques.
High Frequency Trading, Information, and Takeovers
Humphery-Jenner, M.
2011-01-01
This paper (1) proposes new variables to detect informed high-frequency trading (HFT), (2) shows that HFT can help to predict takeover targets, and (3) shows that HFT in uences target announcement announcement returns. Prior literature suggests that informed trade may occur before takeovers, but has
Essays on high frequency financial econometrics
X. Yang
2015-01-01
It has long been demonstrated that continuous-time methods are powerful tools in financial modeling. Yet only in recent years, their counterparts in empirical analysis—high frequency econometrics—began to emerge with the availability of intra-day data and relevant statistical tools. This dissertatio
Essays on high frequency financial econometrics
Yang, X.
2015-01-01
It has long been demonstrated that continuous-time methods are powerful tools in financial modeling. Yet only in recent years, their counterparts in empirical analysis—high frequency econometrics—began to emerge with the availability of intra-day data and relevant statistical tools. This
Advanced Extremely High Frequency Satellite (AEHF)
2015-12-01
High Frequency Satellite (AEHF) is a joint service satellite communications system that provides global , survivable, secure, protected, and jam...three satellites fully integrated into the Milstar constellation. October 2014: On October 16, 2014, the program received PEO certification for the...Combined Orbital Operation, Logistics Sustainment ( COOLS ) contract, it will be completed and coordinated in CY 2016. The AEHF system being sustained
High Frequency Trading, Information, and Takeovers
Humphery-Jenner, M.
2011-01-01
This paper (1) proposes new variables to detect informed high-frequency trading (HFT), (2) shows that HFT can help to predict takeover targets, and (3) shows that HFT in uences target announcement announcement returns. Prior literature suggests that informed trade may occur before takeovers, but has
High spectral purity Kerr frequency comb radio frequency photonic oscillator.
Liang, W; Eliyahu, D; Ilchenko, V S; Savchenkov, A A; Matsko, A B; Seidel, D; Maleki, L
2015-08-11
Femtosecond laser-based generation of radio frequency signals has produced astonishing improvements in achievable spectral purity, one of the basic features characterizing the performance of an radio frequency oscillator. Kerr frequency combs hold promise for transforming these lab-scale oscillators to chip-scale level. In this work we demonstrate a miniature 10 GHz radio frequency photonic oscillator characterized with phase noise better than -60 dBc Hz(-1) at 10 Hz, -90 dBc Hz(-1) at 100 Hz and -170 dBc Hz(-1) at 10 MHz. The frequency stability of this device, as represented by Allan deviation measurements, is at the level of 10(-10) at 1-100 s integration time-orders of magnitude better than existing radio frequency photonic devices of similar size, weight and power consumption.
Norin, L; Leyser, T B; Nordblad, E; Thidé, B; McCarrick, M
2009-02-13
Experimental results of secondary electromagnetic radiation, stimulated by high-frequency radio waves irradiating the ionosphere, are reported. We have observed emission peaks, shifted in frequency up to a few tens of Hertz from radio waves transmitted at several megahertz. These emission peaks are by far the strongest spectral features of secondary radiation that have been reported. The emissions are attributed to stimulated Brillouin scattering, long predicted but hitherto never unambiguously identified in high-frequency ionospheric interaction experiments. The experiments were performed at the High-Frequency Active Auroral Research Program (HAARP), Alaska, USA.
High Energy Scattering from the $AdS/CFT$ Correspondence
Peschanski, R
2000-01-01
We apply the AdS/CFT correspondence to derive expressions for the scattering amplitudes at high energy for gauge theories at strong coupling. A method is proposed based on the computation of correlators of Wilson loop operators by their stringy duals in AdS spaces using either the supergravity (weak field) or classical (minimal surface) approximations.
High-Energy Scattering in Non-Commutative Field Theory
Kumar, J; Kumar, Jason; Rajaraman, Arvind
2005-01-01
We analyze high energy scattering for non-commutative field theories using the dual gravity description. We find that the Froissart-Martin bound still holds, but that cross-sections stretch in the non-commutative directions in a way dependent on the infrared cutoff. This puzzling behavior suggests new aspects of UV/IR mixing.
Dual absorptive model and np elastic scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Saleem, M.; Fazal-e-Aleem
1980-06-01
The most recent measurements of the angular distribution and total cross-sections in np elastic scattering at high energies from 70 to 400 GeV/c have been fitted by using the dual absorptive model. Comparison has also been made with the Kane-Siedl model and the simple Regge pole model.
High-resolution analysis of protons scattered from solid surfaces
Energy Technology Data Exchange (ETDEWEB)
Matsunami, Noriaki; Kitoh, Kenshin (Dept. of Crystalline Materials Science, Engineering, Nagoya Univ. (Japan)); Kanasaki, Jun-ichi; Itoh, Noriaki (Physics Dept., Nagoya Univ. (Japan))
1990-01-01
A survey is given for new information that can be obtained by high energy-resolution analysis of protons backscattered from solid surfaces: layer-by-layer analysis of composition, atomic and electronic structures of surfaces. Optimization of the scattering yield leads to the result that scattering geometries of both glancing angle (PELS-I) and 180deg (PELS-II) are feasible. Results obtained by PELS-I are mainly described: Au atom location for Au/Si(111) and surface contraction of W(111). The impact parameter-dependent inelastic energy loss function is mentioned. (orig.).
High efficiency quantum cascade laser frequency comb
Lu, Quanyong; Wu, Donghai; Slivken, Steven; Razeghi, Manijeh
2017-03-01
An efficient mid-infrared frequency comb source is of great interest to high speed, high resolution spectroscopy and metrology. Here we demonstrate a mid-IR quantum cascade laser frequency comb with a high power output and narrow beatnote linewidth at room temperature. The active region was designed with a strong-coupling between the injector and the upper lasing level for high internal quantum efficiency and a broadband gain. The group velocity dispersion was engineered for efficient, broadband mode-locking via four wave mixing. The comb device exhibits a narrow intermode beatnote linewidth of 50.5 Hz and a maximum wall-plug efficiency of 6.5% covering a spectral coverage of 110 cm‑1 at λ ~ 8 μm. The efficiency is improved by a factor of 6 compared with previous demonstrations. The high power efficiency and narrow beatnote linewidth will greatly expand the applications of quantum cascade laser frequency combs including high-precision remote sensing and spectroscopy.
High efficiency quantum cascade laser frequency comb
Lu, Quanyong; Wu, Donghai; Slivken, Steven; Razeghi, Manijeh
2017-01-01
An efficient mid-infrared frequency comb source is of great interest to high speed, high resolution spectroscopy and metrology. Here we demonstrate a mid-IR quantum cascade laser frequency comb with a high power output and narrow beatnote linewidth at room temperature. The active region was designed with a strong-coupling between the injector and the upper lasing level for high internal quantum efficiency and a broadband gain. The group velocity dispersion was engineered for efficient, broadband mode-locking via four wave mixing. The comb device exhibits a narrow intermode beatnote linewidth of 50.5 Hz and a maximum wall-plug efficiency of 6.5% covering a spectral coverage of 110 cm−1 at λ ~ 8 μm. The efficiency is improved by a factor of 6 compared with previous demonstrations. The high power efficiency and narrow beatnote linewidth will greatly expand the applications of quantum cascade laser frequency combs including high-precision remote sensing and spectroscopy. PMID:28262834
About multiple scattering of high energy protons in crystal deflectors
Energy Technology Data Exchange (ETDEWEB)
Taratin, A.M., E-mail: alexander.taratin@cern.ch [Joint Institute for Nuclear Research, 141980 Dubna, Moscow Region (Russian Federation); Scandale, W. [CERN, European Organization for Nuclear Research, CH-1211 Geneva 23 (Switzerland); Laboratoire de l’Accelerateur Lineaire (LAL), Universite Paris Sud Orsay, Orsay (France); INFN Sezione di Roma, Piazzale Aldo Moro 2, 00185 Rome (Italy)
2015-07-15
The process of multiple scattering of high energy protons in a silicon crystal at its amorphous orientation was studied by simulation of proton trajectories in the model of binary collisions and by a straight simulation of the sequences of proton collisions with atoms when their impact parameters are randomly and uniformly distributed on the symmetry cell for a given crystallography direction. The value of the RMS deflection of multiple scattering obtained by the simulation is in a good agreement with the experiment and more than 15% larger than it follows from the Moliere theory. The obtained RMS deflection used in the Gaussian approach of multiple scattering well describes dechanneling of protons in the frame of the planar potential model. Different number of proton collisions with atoms occurs along the same crystal length for different crystal orientations. However, the change of the collision number is compensated by the corresponding change of the mean square deflection in a single collision. Therefore, multiple scattering is the same for different crystal orientations. The generator of multiple scattering for amorphous crystal orientations was proposed.
Ionospheric modifications in high frequency heating experiments
Energy Technology Data Exchange (ETDEWEB)
Kuo, Spencer P. [Department of Electrical and Computer Engineering, Polytechnic School of Engineering, New York University, 5 MetroTech Center, Brooklyn, New York 11201 (United States)
2015-01-15
Featured observations in high-frequency (HF) heating experiments conducted at Arecibo, EISCAT, and high frequency active auroral research program are discussed. These phenomena appearing in the F region of the ionosphere include high-frequency heater enhanced plasma lines, airglow enhancement, energetic electron flux, artificial ionization layers, artificial spread-F, ionization enhancement, artificial cusp, wideband absorption, short-scale (meters) density irregularities, and stimulated electromagnetic emissions, which were observed when the O-mode HF heater waves with frequencies below foF2 were applied. The implication and associated physical mechanism of each observation are discussed and explained. It is shown that these phenomena caused by the HF heating are all ascribed directly or indirectly to the excitation of parametric instabilities which instigate anomalous heating. Formulation and analysis of parametric instabilities are presented. The results show that oscillating two stream instability and parametric decay instability can be excited by the O-mode HF heater waves, transmitted from all three heating facilities, in the regions near the HF reflection height and near the upper hybrid resonance layer. The excited Langmuir waves, upper hybrid waves, ion acoustic waves, lower hybrid waves, and field-aligned density irregularities set off subsequent wave-wave and wave-electron interactions, giving rise to the observed phenomena.
The LASI high-frequency ellipticity system
Energy Technology Data Exchange (ETDEWEB)
Sternberg, B.K.; Poulton, M.M. [Univ. of Arizona, Tucson, AZ (United States)
1995-10-01
A high-frequency, high-resolution, electromagnetic (EM) imaging system has been developed for environmental geophysics surveys. Some key features of this system include: (1) rapid surveying to allow dense spatial sampling over a large area, (2) high-accuracy measurements which are used to produce a high-resolution image of the subsurface, (3) measurements which have excellent signal-to-noise ratio over a wide bandwidth (31 kHz to 32 MHz), (4) large-scale physical modeling to produce accurate theoretical responses over targets of interest in environmental geophysics surveys, (5) rapid neural network interpretation at the field site, and (6) visualization of complex structures during the survey.
High Pressure Brillouin Scattering in the Fragile Glass Former Cumene
Ransom, Tim; Oliver, William
2012-02-01
In recent years full-spectrum analysis in light-scattering has been utilized to explore the liquid-glass transition at variable temperature and ambient pressure. In this study we present temperature- and pressure-dependent Brillouin scattering results for the fragile glass-former cumene. Both equal-angle forward scattering and depolarized backscattering geometries are used, and high pressures are attained by the use of a diamond anvil cell mounted in a custom temperature-controlled housing. Opening up the variable pressure regime to full-spectrum analysis will allow more stringent tests of mode-coupling theory as well as greater insight into the behavior of glass-forming systems.
High pressure gas vessels for neutron scattering experiments
Done, R; Evans, B E; Bowden, Z A
2010-01-01
The combination of high pressure techniques with neutron scattering proves to be a powerful tool for studying the phase transitions and physical properties of solids in terms of inter-atomic distances. In our report we are going to review a high pressure technique based on a gas medium compression. This technique covers the pressure range up to ~0.7GPa (in special cases 1.4GPa) and typically uses compressed helium gas as the pressure medium. We are going to look briefly at scientific areas where high pressure gas vessels are intensively used in neutron scattering experiments. After that we are going to describe the current situation in high pressure gas technology; specifically looking at materials of construction, designs of seals and pressure vessels and the equipment used for generating high pressure gas.
Inelastic scattering in condensed matter with high intensity Moessbauer radiation
Energy Technology Data Exchange (ETDEWEB)
Yelon, W.B.; Schupp, G.
1990-10-01
We give a progress report for the work which has been carried out in the last three years with DOE support. A facility for high-intensity Moessbauer scattering is now fully operational at the University of Missouri Research Reactor (MURR) as well as facility at Purdue, using special isotopes produced at MURR. High precision, fundamental Moessbauer effect studies have been carried out using scattering to filter the unwanted radiation. These have led to a new Fourier transform method for describing Moessbauer effect (ME) lineshape and a direct method of fitting ME data to the convolution integral. These methods allow complete correction for source resonance self absorption (SRSA) and the accurate representation of interference effects that add an asymmetric component to the ME lines. We have begun applying these techniques to attenuated ME sources whose central peak has been attenuated by stationary resonant absorbers, to more precisely determine interference parameters and line-shape behavior in the resonance asymptotic region. This analysis is important to both the fundamental ME studies and to scattering studies for which a deconvolution is essential for extracting the correct recoilless fractions and interference parameters. A number of scattering studies have been successfully carried out including a study of the thermal diffuse scattering in Si, which led to an analysis of the resolution function for gamma-ray scattering. Also studied was the anharmonic motion in Na and the satellite reflection Debye-Waller factor in TaS{sub 2}, which indicate phason rather than phonon behavior. We have begun quasielastic diffusion studies in viscous liquids and current results are summarized. These advances, coupled to our improvements in MIcrofoil Conversion Electron spectroscopy lay the foundation for the proposed research outlined in this request for a three-year renewal of DOE support.
Gamma scattering in condensed matter with high intensity Moessbauer radiation
Energy Technology Data Exchange (ETDEWEB)
1990-01-01
We give a progress report for the work which has been carried out in the last three years with DOE support. A facility for high-intensity Moessbauer scattering is now fully operational at the University of Missouri Research Reactor (MURR) as well as a facility at Purdue, using special isotopes produced at MURR. High precision, fundamental Moessbauer effect studies have been carried out using scattering to filter the unwanted radiation. These have led to a new Fourier transform method for describing Moessbauer effect (ME) lineshape and a direct method of fitting ME data to the convolution integral. These methods allow complete correction for source resonance self absorption (SRSA) and the accurate representation of interference effects that add an asymmetric component to the ME lines. We have begun applying these techniques to attenuated ME sources whose central peak has been attenuated by stationary resonant absorbers, to more precisely determine interference parameters and line-shape behavior in the resonance asymptotic region. This analysis is important to both the fundamental ME studies and to scattering studies for which a deconvolution is essential for extracting the correct recoilless fractions and interference parameters. A number of scattering studies have been successfully carried out including a study of the thermal diffuse scattering in Si, which led to an analysis of the resolution function for gamma-ray scattering. Also studied was the anharmonic motion in Na and the satellite reflection Debye-Waller factor in TaS{sub 2}, which indicate phason rather than phonon behavior. We have begun quasielastic diffusion studies in viscous liquids and current results are summarized. These advances, coupled to our improvements in MIcrofoil Conversion Electron spectroscopy lay the foundation for the proposed research outlined in this request for a three-year renewal of DOE support.
Institute of Scientific and Technical Information of China (English)
Zhong Fei; Li Xin-Hua; Qiu Kai; Yin Zhi-Jun; Ji Chang-Jian; Cao Xian-Cun; Han Qi-Feng; Chen Jia-Rong; Wang Yu-Qi
2007-01-01
GaN layers with different polarities have been prepared by radio-frequency molecular beam epitaxy (RF-MBE) and characterized by Raman scattering. Polarity control are realized by controlling Al/N flux ratio during high temperature AlN buffer growth. The Raman results illustrate that the N-polarity GaN films have frequency shifts at A1(LO) mode because of their high carrier density; the forbidden A1 (TO) mode occurs for mixed-polarity GaN films due to the destroyed translation symmetry by inversion domain boundaries (IDBS); Raman spectra for Ga-polarity GaN films show that they have neither frequency shifts mode nor forbidden mode. These results indicate that Ga-polarity GaN films have a better quality, and they are in good agreement with the results obtained from the room temperature Hall mobility. The best values of Ga-polarity GaN films are 1042 cm2/Vs with a carrier density of 1.0×1017 cm-3.
High-Frequency Rayleigh-Wave Method
Institute of Scientific and Technical Information of China (English)
Jianghai Xia; Richard D Millerg; Xu Yixian; Luo Yinhe; Chen Chao; Liu Jiangping; Julian Ivanov; Chong Zeng
2009-01-01
High-frequency (≥2 Hz) Rayleigh-wave data acquired with a multichannei recording sys-tem have been utilized to determine shear (S)-wave velocities in near-surface geophysics since the early 1980s. This overview article discusses the main research results of high-frequency surface-wave tech-niques achieved by research groups at the Kansas Geological Survey and China University of Geosciences in the last 15 years. The multichannel analysis of surface wave (MASW) method is a nou-iuvasive acoustic approach to estimate near-surface S-wave velocity. The differences between MASW results and direct borehole measurements are approximately 15% or less and random. Studies show that simultaneous inversion with higher modes and the fundamental mode can increase model resolution and an investigation depth. The other important seismic property, quality factor (Q), can also be estimated with the MASW method by inverting attenuation coefficients of Rayleigh waves. An inverted model (S-wave velocity or Q) obtained using a damped least-squares method can be assessed by an optimal damping vector in a vicinity of the inverted model determined by an objective function, which is the trace of a weighted sum of model-resolution and model-covariance matrices. Current developments include modeling high-frequency Rayleigh-waves in near-surface media, which builds a foundation for shallow seismic or Rayleigh-wave inversion in the time-offset domain; imaging dispersive energy with high resolution in the frequency-velocity domain and possibly with data in an arbitrary acquisition geometry, which opens a door for 3D surface-wave techniques; and successfully separating surface-wave modes, which provides a valuable tool to perform S-wave velocity profiling with high-horizontal resolution.
Sütterlin, R; Priori, R; Larsson, A; LoMauro, A; Frykholm, P; Aliverti, A
2014-01-01
Superimposed high-frequency jet ventilation (SHFJV) has proved to be safe and effective in clinical practice. However, it is unclear which frequency range optimizes ventilation and gas exchange. The aim of this study was to systematically compare high-frequency jet ventilation (HFJV) with HFJV by assessing chest wall volume variations (ΔEEV(CW)) and gas exchange in relation to variable high frequency. SHFJV or HFJV were used alternatively to ventilate the lungs of 10 anaesthetized pigs (21-25 kg). The low-frequency component was kept at 16 min(-1) in SHFJV. In both modes, high frequencies ranging from 100 to 1000 min(-1) were applied in random order and ventilation was maintained for 5 min in all modalities. Chest wall volume variations were obtained using opto-electronic plethysmography. Airway pressures and arterial blood gases were measured repeatedly. SHFJV increased ΔEEV(CW) compared with HFJV; the difference ranged from 43 to 68 ml. Tidal volume (V(T)) was always >240 ml during SHFJV whereas during HFJV ranged from 92 ml at the ventilation frequency of 100 min(-1) to negligible values at frequencies >300 min(-1). We observed similar patterns for Pa(O₂) and Pa(CO₂). SHFJV provided generally higher, frequency-independent oxygenation (Pa(O₂) at least 32.0 kPa) and CO₂ removal (Pa(CO₂) ∼5.5 kPa), whereas HFJV led to hypoxia and hypercarbia at higher rates (Pa(O₂) 10 kPa at f(HF)>300 min(-1)). In a porcine model, SHFJV was more effective in increasing end-expiratory volume than single-frequency HFJV, but both modes may provide adequate ventilation in the absence of airway obstruction and respiratory disease, except for HFJV at frequencies ≥300 min(-1).
High Temperature, High Frequency Fuel Metering Valve Project
National Aeronautics and Space Administration — Active Signal Technologies and its subcontractor Moog propose to develop a high-frequency actuator driven valve intended to achieve TRL 6 by the end of Phase II....
Causality, renormalizability and ultra-high energy gravitational scattering
Hollowood, Timothy J.; Shore, Graham M.
2016-05-01
The amplitude { A }(s,t) for ultra-high energy scattering can be found in the leading eikonal approximation by considering propagation in an Aichelburg-Sexl gravitational shockwave background. Loop corrections in the QFT describing the scattered particles are encoded for energies below the Planck scale in an effective action which in general exhibits causality violation and Shapiro time advances. In this paper, we use Penrose limit techniques to calculate the full energy dependence of the scattering phase shift {{{\\Theta }}}{{scat}}(\\hat{s}), where the single variable \\hat{s}={Gs}/{m}2{b}d-2 contains both the CM energy s and impact parameter b, for a range of scalar QFTs in d dimensions with different renormalizability properties. We evaluate the high-energy limit of {{{\\Theta }}}{{scat}}(\\hat{s}) and show in detail how causality is related to the existence of a well-defined UV completion. Similarities with graviton scattering and the corresponding resolution of causality violation in the effective action by string theory are briefly discussed.
Causality, Renormalizability and Ultra-High Energy Gravitational Scattering
Hollowood, Timothy J
2016-01-01
The amplitude A(s,t) for ultra-high energy scattering can be found in the leading eikonal approximation by considering propagation in an Aichelburg-Sexl gravitational shockwave background. Loop corrections in the QFT describing the scattered particles are encoded for energies below the Planck scale in an effective action which in general exhibits causality violation and Shapiro time advances. In this paper, we use Penrose limit techniques to calculate the full energy dependence of the scattering phase shift Theta_scat(hat_s},, where the single variable hat_s = Gs/m^2 b^(d-2) contains both the CM energy s and impact parameter b, for a range of scalar QFTs in d dimensions with different renormalizability properties. We evaluate the high-energy limit of Theta_scat(hat_s) and show in detail how causality is related to the existence of a well-defined UV completion. Similarities with graviton scattering and the corresponding resolution of causality violation in the effective action by string theory are briefly disc...
Frequency shifts of resonant modes of the Sun due to near-surface convective scattering
Bhattacharya, Jishnu; Antia, H M
2015-01-01
Measurements of oscillation frequencies of the Sun and stars can provide important independent constraints on their internal structure and dynamics. Seismic models of these oscillations are used to connect structure and rotation of the star to its resonant frequencies, which are then compared with observations, the goal being that of minimizing the difference between the two. Even in the case of the Sun, for which structure models are highly tuned, observed frequencies show systematic deviations from modeled frequencies, a phenomenon referred to as the "surface term." The dominant source of this systematic effect is thought to be vigorous near-surface convection, which is not well accounted for in both stellar modeling and mode-oscillation physics. Here we bring to bear the method of homogenization, applicable in the asymptotic limit of large wavelengths (in comparison to the correlation scale of convection), to characterize the effect of small-scale surface convection on resonant-mode frequencies in the Sun....
Wang, Chun-Chin; Chandrappa, Dayananda; Smirnoff, Nicholas; Moger, Julian
2015-03-01
The potential of microalgae as a source of renewable energy has received considerable interest because they can produce lipids (fatty acids and isoprenoids) that can be readily converted into biofuels. However, significant research in this area is required to increase yields to make this a viable renewable source of energy. An analytical tool that could provide quantitative in situ spectroscopic analysis of lipids synthesis in individual microalgae would significantly enhance our capability to understand the synthesis process at the cellular level and lead to the development of strategies for increasing yield. Stimulated Raman scattering (SRS) microscopy has great potential in this area however, the pump-probe signal from two-color two-photon absorption of pigments (chlorophyll and carotenoids) overwhelm the SRS signal and prevent its application. Clearly, the development of a background suppression technique is of significant value for this important research area. To overcome the limitation of SRS in pigmented specimens, we establish a frequency-modulated stimulated Raman scattering (FM-SRS) microscopy that eliminates the non-Raman background by rapidly toggling on-and-off the targeted Raman resonance. Moreover, we perform the background-free imaging and analysis of intracellular lipid droplets and extracellular hydrocarbons in a green microalga with FM-SRS microscopy. We believe that FM-SRS microscopy demonstrates the potential for many applications in pigmented cells and provides the opportunity for improved selective visualization of the chemical composition of algae and plants
High-Frequency Percussive Ventilation Revisited
2010-01-01
physiologic and clin- ical outcomes. Pediatric and adult inhalational injury studies have linked HFPV to an improvement in static lung compliance...sedation–analgesic combinations (usually fentanyl with the individual or combined use of midazolam and propofol and/or dexmedetomidine), patient...1998;84:1174–7. 34. Frantz ID III, Close RH. Alveolar pressure swings during high frequency ventilation in rabbits. Pediatr Res 1985;19:162–6. 35. Pillow
Wear, Keith A.
2002-05-01
Measurements of ultrasonic properties of calcaneus (heel bone) have been shown to be effective for the diagnosis of osteoporosis. However, the mechanisms underlying the interaction between ultrasound and bone are currently not well understood. A model that predicts backscatter from trabecular bone has been developed. Scattering is assumed to originate from the surfaces of trabeculae, which are modeled as long, thin, elastic cylinders with radii small compared with the ultrasonic wavelength. Experimental measurements of backscatter using broadband ultrasound centered at 500 kHz from 43 trabecular bone samples (from human calcaneus) in vitro have been performed. Microcomputed tomography has been performed on all 43 samples in order to measure microarchitectural features. The theory correctly predicts the measured dependences of backscatter on ultrasonic frequency and trabecular thickness. [Funding from the FDA Office of Womens Health is gratefully acknowledged.
Institute of Scientific and Technical Information of China (English)
Li Yu-Qing; Ma Jie; Wu Ji-Zhou; Zhang Yi-Chi; Zhao Yan-Ting; Wang Li-Rong; Xiao Lian-Tuan; Jia Suo-Tang
2012-01-01
We report on the observation of enhanced high-order partial wave scattering from atom-atom interaction via changing the temperature of a magneto-optical trap in the process of photoassociation. The high-order scattering partial wave is directly manifested through the large signal amplitude of the rovibrational resonance levels of trap-loss spectroscopy from photoassociation.
Adams, T; Bugel, L; Camilleri, L; Conrad, J M; De Gouvêa, A; Fisher, P H; Formaggio, J A; Jenkins, J; Karagiorgi, G; Kobilarcik, T R; Kopp, S; Kyle, G; Loinaz, W A; Mason, D A; Milner, R; Moore, R; Morfín, J G; Nakamura, M; Naples, D; Nienaber, P; Olness, F I; Owens, J F; Pate, S F; Pronin, A; Seligman, W G; Shaevitz, M H; Schellman, H; Schienbein, I; Syphers, M J; Tait, T M P; Takeuchi, T; Tan, C Y; Van de Water, R G; Yamamoto, R K; Yu, J Y
2008-01-01
This article presents the physics case for a new high-energy, ultra-high statistics neutrino scattering experiment, NuSOnG (Neutrino Scattering on Glass). This experiment uses a Tevatron-based neutrino beam to obtain over an order of magnitude higher statistics than presently available for the purely weak processes $\
Pulsar high energy emission due to inverse Compton scattering
Energy Technology Data Exchange (ETDEWEB)
Lyutikov, Maxim
2013-06-15
We discuss growing evidence that pulsar high energy is emission is generated via Inverse Compton mechanism. We reproduce the broadband spectrum of Crab pulsar, from UV to very high energy gamma-rays - nearly ten decades in energy, within the framework of the cyclotron-self-Compton model. Emission is produced by two counter-streaming beams within the outer gaps, at distances above ∼ 20 NS radii. The outward moving beam produces UV-X-ray photons via Doppler-booster cyclotron emission, and GeV photons by Compton scattering the cyclotron photons produced by the inward going beam. The scattering occurs in the deep Klein-Nishina regime, whereby the IC component provides a direct measurement of particle distribution within the magnetosphere. The required plasma multiplicity is high, ∼10{sup 6} – 10{sup 7}, but is consistent with the average particle flux injected into the pulsar wind nebula.
(-p)p and pp Elastic Scattering at High Energies
Institute of Scientific and Technical Information of China (English)
无
2007-01-01
Based on the eikonalized Glauber representation of hadron-hadron scattering, we study the diffractive processes of -pp and pp elastic scattering at high energies. From our theoretical calculations and fits to the corresponding experimental data at high energies and all available momentum transfer, we find that the Pomeron exchange contributions play a significant role in description of differential cross section dσ/dt in the whole experimental domain. The Pomeron exchange contributions are related to multi-gluon exchanges in QCD, which are color singlet bound state of Reggeized gluons, such as tensor glueball and Odderon. Accordingly, we may claim that the -pp and pp diffractive processes at high energies s and moderate momentum transfer t would be a good tool to verify the existence of the color singlet multigluon bound states and to test QCD since QCD theory does predict the existence of these states. Therefore, we believe that the experimental measurement should be done for these diffractive processes.
High-Frequency Electromagnetic Propagation/Scattering Codes
2005-12-31
given by f c() oc e-i7T/ 3 1 eal C exp(5i7r/6) (7.21) Ai’(-al) and g0 1 - efl , C exp(5ir/6) (7.22) g 1 Ai(-, l) where a,1 - 2.338 is the negative of...strip caustics (or focal points), where w(s) -4 0. Strictly speaking , if we compute the radiated field by integrating the current, this singularity
DEFF Research Database (Denmark)
Troelsen, Jens; Meincke, Peter; Breinbjerg, Olav
2000-01-01
In many radar applications it is necessary to determine the scattering from an object over a wide frequency band. The asymptotic waveform evaluation (AWE), which is a moment matching (MM) technique, constitutes a method to this end. In general, MM techniques provide a reduced-order model of a fun......In many radar applications it is necessary to determine the scattering from an object over a wide frequency band. The asymptotic waveform evaluation (AWE), which is a moment matching (MM) technique, constitutes a method to this end. In general, MM techniques provide a reduced-order model...... into account. To the knowledge of the authors the AWE technique has not previously been applied to a MoM solution based on this kind of integral equation. It is the purpose of this paper to investigate the use of the AWE technique as a tool to obtain a fast frequency sweep of the field scattered...
Scattering Theory Calculations of Casimir Energies at High Curvature
Graham, Noah; Emig, Thorsten; Forrow, Aden; Jaffe, Robert; Kardar, Mehran; Maghrebi, Mohammad; Rahi, Jamal; Shpunt, Alex
2013-03-01
Scattering theory provides a powerful tool for capturing the response of an object to electromagnetic charge and field fluctuations. Techniques based on scattering theory have made possible a wide range of new calculations of Casimir energies. In this approach, the Casimir interaction energy for a collection of objects can be expressed in terms of the scattering T-matrices for each object individually, combined with universal translation matrices describing the objects' relative positions and orientations. These translation matrices are derived from an expansion of the free Green's function in an appropriate coordinate system, independent of the details of the objects themselves. This method proves particularly valuable for geometries involving high curvature, such as edges and tips. I will describe this approach in general terms and then give results from several problems to which it has been applied successfully. I will also discuss new developments in scattering theory that have been motivated by these problems. I would like to request that this abstract be part of a session on Casimir physics. Supported by the National Science Foundation, the US Department of Energy, the Defense Advanced Research Projects Agency, and the Deutsche Forschungsgemeinschaft
Glucose detection in a highly scattering medium with diffuse photon-pair density wave
Directory of Open Access Journals (Sweden)
Li-Ping Yu
2017-01-01
Full Text Available We propose a novel optical method for glucose measurement based on diffuse photon-pair density wave (DPPDW in a multiple scattering medium (MSM where the light scattering of photon-pair is induced by refractive index mismatch between scatters and phantom solution. Experimentally, the DPPDW propagates in MSM via a two-frequency laser (TFL beam wherein highly correlated pairs of linear polarized photons are generated. The reduced scattering coefficient μ2s′ and absorption coefficient μ2a of DPPDW are measured simultaneously in terms of the amplitude and phase measurements of the detected heterodyne signal under arrangement at different distances between the source and detection fibers in MSM. The results show that the sensitivity of glucose detection via glucose-induced change of reduced scattering coefficient (δμ2s′ is 0.049%mM−1 in a 1% intralipid solution. In addition, the linear range of δμ2s′ vs glucose concentration implies that this DPPDW method can be used to monitor glucose concentration continuously and noninvasively subcutaneously.
High-k Scattering Receiver Mixer Performance for NSTX-U
Barchfeld, Robert; Riemenschneider, Paul; Domier, Calvin; Luhmann, Neville; Ren, Yang; Kaita, Robert
2016-10-01
The High-k Scattering system detects primarily electron-scale turbulence k θ spectra for studying electron thermal transport in NSTX-U. A 100 mW, 693 GHz probe beam passes through plasma, and scattered power is detected by a 4-pixel quasi optical, mixer array. Remotely controlled receiving optics allows the scattering volume to be located from core to edge with a k θ span of 7 to 40 cm-1. The receiver array features 4 RF diagonal input horns, where the electric field polarization is aligned along the diagonal of a square cross section horn, at 30 mm channel spacing. The local oscillator is provided by a 14.4 GHz source followed by a x48 multiplier chain, giving an intermediate frequency of 1 GHz. The receiver optics receive 4 discreet scattering angles simultaneously, and then focus the signals as 4 parallel signals to their respective horns. A combination of a steerable probe beam, and translating receiver, allows for upward or downward scattering which together can provide information about 2D turbulence wavenumber spectrum. IF signals are digitized and stored for later computer analysis. The performance of the receiver mixers is discussed, along with optical design features to enhance the tuning and performance of the mixers. Work supported in part by U.S. DOE Grant DE-FG02-99ER54518 and DE-AC02-09CH1146.
Parametric nanomechanical amplification at very high frequency.
Karabalin, R B; Feng, X L; Roukes, M L
2009-09-01
Parametric resonance and amplification are important in both fundamental physics and technological applications. Here we report very high frequency (VHF) parametric resonators and mechanical-domain amplifiers based on nanoelectromechanical systems (NEMS). Compound mechanical nanostructures patterned by multilayer, top-down nanofabrication are read out by a novel scheme that parametrically modulates longitudinal stress in doubly clamped beam NEMS resonators. Parametric pumping and signal amplification are demonstrated for VHF resonators up to approximately 130 MHz and provide useful enhancement of both resonance signal amplitude and quality factor. We find that Joule heating and reduced thermal conductance in these nanostructures ultimately impose an upper limit to device performance. We develop a theoretical model to account for both the parametric response and nonequilibrium thermal transport in these composite nanostructures. The results closely conform to our experimental observations, elucidate the frequency and threshold-voltage scaling in parametric VHF NEMS resonators and sensors, and establish the ultimate sensitivity limits of this approach.
Gaind, Vaibhav; San, Aung K; Lin, Dergan; Webb, Kevin J
2014-01-01
We show that a scalar Bethe-Salpeter equation model captures the measured copolarized electric field frequency correlation magnitude for randomly scattering slabs in the weakly scattering, nondiffusive regime. Consequently, the model could be used to form images of tissue on the millimeter and submillimeter length scale, and for environmental sensing with comparable scatter, as dictated by the optical scattering length in relation to the scattering domain size.
High directivity optical antenna substrates for surface enhanced Raman scattering.
Wang, Dongxing; Zhu, Wenqi; Chu, Yizhuo; Crozier, Kenneth B
2012-08-22
A two-dimensional array of gold optical antennas integrated with a one-dimensional array of gold strips and mirrors is introduced and fabricated. The experimental results show that this design achieves average surface-enhanced Raman scattering (SERS) enhancement factors as high as 1.2 × 10(10) , which is more than two orders of magnitude larger than optical antennas without the gold strips and gold mirror.
QCD factorization for forward hadron scattering at high energies
Ermolaev, B I; Troyan, S I
2011-01-01
We consider the QCD factorization of DIS structure functions at small x and amplitudes of 2->2 -hadronic forward scattering at high energy. We show that both collinear and k_T-factorization for these processes can be obtained approximately as reductions of a more general (totally unintegrated) form of the factorization. The requirement of ultraviolet and infrared stability of the factorization convolutions allows us to obtain restrictions on the fits for the parton distributions in k_T- and collinear factorization.
Elastic diffractive scattering of nucleons at ultra-high energies
Energy Technology Data Exchange (ETDEWEB)
Godizov, A.A., E-mail: anton.godizov@gmail.com
2014-07-30
A simple Regge-eikonal model with the eikonal represented as a single-reggeon-exchange term is applied to description of the nucleon–nucleon elastic diffractive scattering at ultra-high energies. The range of validity of the proposed approximation is discussed. The model predictions for the proton–proton cross-sections at the collision energy 14 TeV are given.
Recovering scattering obstacles by multi-frequency phaseless far-field data
Zhang, Bo; Zhang, Haiwen
2017-09-01
It is well known that the modulus of the far-field pattern (or phaseless far-field pattern) is invariant under translations of the scattering obstacle if only one plane wave is used as the incident field, so the shape but not the location of the obstacle can be recovered from the phaseless far-field data. This paper aims to devise an approach to break the translation invariance property of the phaseless far-field pattern. To this end, we make use of the superposition of two plane waves rather than one plane wave as the incident field. In this paper, it is mathematically proved that the translation invariance property of the phaseless far-field pattern can indeed be broken if superpositions of two plane waves are used as the incident fields for all wave numbers in a finite interval. Furthermore, a recursive Newton-type iteration algorithm in frequencies is also developed to numerically recover both the location and the shape of the obstacle simultaneously from multi-frequency phaseless far-field data. Numerical examples are also carried out to illustrate the validity of the approach and the effectiveness of the inversion algorithm.
Efficient frequency conversion by stimulated Raman scattering in a sodium nitrate aqueous solution
Energy Technology Data Exchange (ETDEWEB)
Ganot, Yuval, E-mail: yuvalga@sapir.ac.il, E-mail: ibar@bgu.ac.il [Department of Engineering, Sapir Academic College, D. N. Hof Ashkelon 79165 (Israel); Bar, Ilana, E-mail: yuvalga@sapir.ac.il, E-mail: ibar@bgu.ac.il [Department of Physics, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel)
2015-09-28
Frequency conversion of laser beams, based on stimulated Raman scattering (SRS) is an appealing technique for generating radiation at new wavelengths. Here, we investigated experimentally the SRS due to a single pass of a collimated frequency-doubled Nd:YAG laser beam (532 nm) through a saturated aqueous solution of sodium nitrate (NaNO{sub 3}), filling a 50 cm long cell. These experiments resulted in simultaneous generation of 1st (564 nm) and 2nd (599 nm) Stokes beams, corresponding to the symmetric stretching mode of the nitrate ion, ν{sub 1}(NO{sub 3}{sup −}), with 40 and 12 mJ/pulse maximal converted energies, equivalent to 12% and 4% efficiencies, respectively, for a 340 mJ/pulse pump energy. The results indicate that the pump and SRS beams were thermally defocused and that four-wave mixing was responsible for the second order Stokes process onset.
DEFF Research Database (Denmark)
Andersen, Lasse Mejling; McKinstrie, C. J.; Rottwitt, Karsten
2013-01-01
Recently, we solved the coupled-mode equations for Bragg scattering (BS) in the low- and high-conversion regimes, but without the effects of nonlinear phase modulation (NPM). We now present solutions and Green functions in the low-conversion regime that include NPM. We find that NPM does not change...... are still possible, even when the effects of NPM are included. Finally, the effects of using different input signals are considered, and we conclude that using the natural input modes of the system drastically increases the efficiency. © (2013) COPYRIGHT Society of Photo-Optical Instrumentation Engineers...
FREQUENCY SHIFTS OF RESONANT MODES OF THE SUN DUE TO NEAR-SURFACE CONVECTIVE SCATTERING
Energy Technology Data Exchange (ETDEWEB)
Bhattacharya, J.; Hanasoge, S.; Antia, H. M. [Department of Astronomy and Astrophysics, Tata Institute of Fundamental Research, Mumbai-400005 (India)
2015-06-20
Measurements of oscillation frequencies of the Sun and stars can provide important independent constraints on their internal structure and dynamics. Seismic models of these oscillations are used to connect structure and rotation of the star to its resonant frequencies, which are then compared with observations, the goal being that of minimizing the difference between the two. Even in the case of the Sun, for which structure models are highly tuned, observed frequencies show systematic deviations from modeled frequencies, a phenomenon referred to as the “surface term.” The dominant source of this systematic effect is thought to be vigorous near-surface convection, which is not well accounted for in both stellar modeling and mode-oscillation physics. Here we bring to bear the method of homogenization, applicable in the asymptotic limit of large wavelengths (in comparison to the correlation scale of convection), to characterize the effect of small-scale surface convection on resonant-mode frequencies in the Sun. We show that the full oscillation equations, in the presence of temporally stationary three-dimensional (3D) flows, can be reduced to an effective “quiet-Sun” wave equation with altered sound speed, Brünt–Väisäla frequency, and Lamb frequency. We derive the modified equation and relations for the appropriate averaging of 3D flows and thermal quantities to obtain the properties of this effective medium. Using flows obtained from 3D numerical simulations of near-surface convection, we quantify their effect on solar oscillation frequencies and find that they are shifted systematically and substantially. We argue therefore that consistent interpretations of resonant frequencies must include modifications to the wave equation that effectively capture the impact of vigorous hydrodynamic convection.
Nomoto, Junichi; Makino, Hisao; Yamamoto, Tetsuya
2015-01-01
The effects of using radio-frequency (RF)-superimposed direct-current (DC) magnetron sputtering deposition on the structural, electrical, and optical properties of aluminum-doped ZnO (AZO)-based highly transparent conducting oxide films have been examined. AZO films were deposited on heated non-alkaline glass substrates (200 °C) using ZnO:Al2O3 (2 wt. % Al2O3) ceramic oxide targets with the total power varied from 150 to 300 W, and at various RF to DC power ratios, AZO films deposited by a mixed approach with the RF to the total power ratio of 0.14 showed the lowest resistivity of 2.47 × 10-4 Ω cm with the highest carrier concentration of 6.88 × 1020 cm-3 and the highest Hall mobility (μH) of 36.8 cm2/Vs together with the maximum value of an average transmittance in the visible spectral range from 400 to 700 nm. From the analysis of optical data based on the simple Drude model combined with the Tauc-Lorentz model and the results of Hall effect measurements, the optical mobility (μopt) was determined. A comparison of μopt with μH clarified the effects of the mixed approach not only on the reduction of the grain boundary contribution to the carrier transport but also on retaining high carrier mobility of in-grains for the AZO films.
High-frequency graphene voltage amplifier.
Han, Shu-Jen; Jenkins, Keith A; Valdes Garcia, Alberto; Franklin, Aaron D; Bol, Ageeth A; Haensch, Wilfried
2011-09-14
While graphene transistors have proven capable of delivering gigahertz-range cutoff frequencies, applying the devices to RF circuits has been largely hindered by the lack of current saturation in the zero band gap graphene. Herein, the first high-frequency voltage amplifier is demonstrated using large-area chemical vapor deposition grown graphene. The graphene field-effect transistor (GFET) has a 6-finger gate design with gate length of 500 nm. The graphene common-source amplifier exhibits ∼5 dB low frequency gain with the 3 dB bandwidth greater than 6 GHz. This first AC voltage gain demonstration of a GFET is attributed to the clear current saturation in the device, which is enabled by an ultrathin gate dielectric (4 nm HfO(2)) of the embedded gate structures. The device also shows extrinsic transconductance of 1.2 mS/μm at 1 V drain bias, the highest for graphene FETs using large-scale graphene reported to date.
Shea, Jacob D.; Kosmas, Panagiotis; Hagness, Susan C.; Van Veen, Barry D.
2010-01-01
Purpose: Breast density measurement has the potential to play an important role in individualized breast cancer risk assessment and prevention decisions. Routine evaluation of breast density will require the availability of a low-cost, nonionizing, three-dimensional (3-D) tomographic imaging modality that exploits a strong properties contrast between dense fibroglandular tissue and less dense adipose tissue. The purpose of this computational study is to investigate the performance of 3-D tomography using low-power microwaves to reconstruct the spatial distribution of breast tissue dielectric properties and to evaluate the modality for application to breast density characterization. Methods: State-of-the-art 3-D numerical breast phantoms that are realistic in both structural and dielectric properties are employed. The test phantoms include one sample from each of four classes of mammographic breast density. Since the properties of these phantoms are known exactly, these testbeds serve as a rigorous benchmark for the imaging results. The distorted Born iterative imaging method is applied to simulated array measurements of the numerical phantoms. The forward solver in the imaging algorithm employs the finite-difference time-domain method of solving the time-domain Maxwell’s equations, and the dielectric profiles are estimated using an integral equation form of the Helmholtz wave equation. A multiple-frequency, bound-constrained, vector field inverse scattering solution is implemented that enables practical inversion of the large-scale 3-D problem. Knowledge of the frequency-dependent characteristic of breast tissues at microwave frequencies is exploited to obtain a parametric reconstruction of the dispersive dielectric profile of the interior of the breast. Imaging is performed on a high-resolution voxel basis and the solution is bounded by a known range of dielectric properties of the constituent breast tissues. The imaging method is validated using a breast
Advances in Very High Frequency Power Conversion
DEFF Research Database (Denmark)
Kovacevic, Milovan
. Excellent performance and small size of magnetic components and capacitors at very high frequencies, along with constant advances in performance of power semiconductor devices, suggests a sizable shift in consumer power supplies market into this area in the near future. To operate dc-dc converter power...... to be applied, especially at low power levels where gating loss becomes a significant percentage of the total loss budget. Various resonant gate drive methods have been proposed to address this design challenge, with varying size, cost, and complexity. This dissertation presents a self-oscillating resonant gate...
Cultures of High-frequency Trading
DEFF Research Database (Denmark)
Lange, Ann-Christina; Lenglet, Marc; Seyfert, Robert
2016-01-01
As part of ongoing work to lay a foundation for social studies of high-frequency trading (HFT), this paper introduces the culture(s) of HFT as a sociological problem relating to knowledge and practice. HFT is often discussed as a purely technological development, where all that matters is the speed...... of allocating, processing and transmitting data. Indeed, the speed at which trades are executed and data transmitted is accelerating, and it is fair to say that algorithms are now the primary interacting agents operating in the financial markets. However, we contend that HFT is first and foremost a cultural...
Vertical Nanowire High-Frequency Transistors
Johansson, Sofia
2014-01-01
This thesis explores a novel transistor technology based on vertical InAs nanowires, which could be considered both for low-power high-frequency analog applications and for replacing Si CMOS in the continued scaling of digital electronics. The potential of this device - the vertical InAs nanowire MOSFET – lies in the combination of the outstanding transport properties of InAs and the improved electrostatic control of the gate-all-around geometry. Three generations of the vertical InAs nanowir...
Vertical Nanowire High-Frequency Transistors
Johansson, Sofia
2014-01-01
This thesis explores a novel transistor technology based on vertical InAs nanowires, which could be considered both for low-power high-frequency analog applications and for replacing Si CMOS in the continued scaling of digital electronics. The potential of this device - the vertical InAs nanowire MOSFET – lies in the combination of the outstanding transport properties of InAs and the improved electrostatic control of the gate-all-around geometry. Three generations of the vertical InAs nano...
Tromberg, Bruce J.; Berger, Andrew J.; Cerussi, Albert E.; Bevilacqua, Frederic; Jakubowski, Dorota
2008-09-23
A technique for measuring broadband near-infrared absorption spectra of turbid media that uses a combination of frequency-domain and steady-state reflectance methods. Most of the wavelength coverage is provided by a white-light steady-state measurement, whereas the frequency-domain data are acquired at a few selected wavelengths. Coefficients of absorption and reduced scattering derived from the frequency-domain data are used to calibrate the intensity of the steady-state measurements and to determine the reduced scattering coefficient at all wavelengths in the spectral window of interest. The absorption coefficient spectrum is determined by comparing the steady-state reflectance values with the predictions of diffusion theory, wavelength by wavelength. Absorption spectra of a turbid phantom and of human breast tissue in vivo, derived with the combined frequency-domain and steady-state technique, agree well with expected reference values.
Vieira, H S
2016-01-01
We study the scattering and the resonant frequencies (quasispectrum) of charged massive scalar waves by Kerr-Newman-Kasuya spacetime (dyon black hole). The equations of motion are written into a Heun form, and its analytical solutions are obtained. We obtain the resonant frequencies expression and the general exact regular partial wave solution. The special cases of the Kerr and Schwarzschild black holes are analyzed and the solutions are shown.
Solar coronal observations at high frequencies
Katsiyannis, A C; Phillips, K J H; Williams, D R; Keenan, F P
2001-01-01
The Solar Eclipse Coronal Imaging System (SECIS) is a simple and extremely fast, high-resolution imaging instrument designed for studies of the solar corona. Light from the corona (during, for example, a total solar eclipse) is reflected off a heliostat and passes via a Schmidt-Cassegrain telescope and beam splitter to two CCD cameras capable of imaging at 60 frames a second. The cameras are attached via SCSI connections to a purpose-built PC that acts as the data acquisition and storage system. Each optical channel has a different filter allowing observations of the same events in both white light and in the green line (Fe XIV at 5303 A). Wavelet analysis of the stabilized images has revealed high frequency oscillations which may make a significant contribution on the coronal heating process. In this presentation we give an outline of the instrument and its future development.
Chluba, J
2008-01-01
We discuss a new solution of the Kompaneets-equation for physical situations in which low frequency photons, forming relatively narrow spectral details, are Compton scattered in an isotropic, infinite medium with an intense ambient blackbody field that is very close to full thermodynamic equilibrium with the free electrons. In this situation the background-induced stimulated Compton scattering slows down the motion of photons toward higher frequencies by a factor of 3 in comparison with the solution that only takes into account Doppler-broadening and boosting. This new solution is important for detailed computations of cosmic microwave background spectral distortions arising due to uncompensated atomic transitions of hydrogen and helium in the early Universe. In addition we derive another analytic solution that only includes the background-induced stimulated Compton scattering and is valid for power-law ambient radiation fields. This solution might have interesting applications for radio lines arising inside ...
Rana, R.; Jain, A.; Shankar, A.; Bednarek, D. R.; Rudin, S.
2016-03-01
In radiography, one of the best methods to eliminate image-degrading scatter radiation is the use of anti-scatter grids. However, with high-resolution dynamic imaging detectors, stationary anti-scatter grids can leave grid-line shadows and moiré patterns on the image, depending upon the line density of the grid and the sampling frequency of the x-ray detector. Such artifacts degrade the image quality and may mask small but important details such as small vessels and interventional device features. Appearance of these artifacts becomes increasingly severe as the detector spatial resolution is improved. We have previously demonstrated that, to remove these artifacts by dividing out a reference grid image, one must first subtract the residual scatter that penetrates the grid; however, for objects with anatomic structure, scatter varies throughout the FOV and a spatially differing amount of scatter must be subtracted. In this study, a standard stationary Smit-Rontgen X-ray grid (line density - 70 lines/cm, grid ratio - 13:1) was used with a high-resolution CMOS detector, the Dexela 1207 (pixel size - 75 micron) to image anthropomorphic head phantoms. For a 15 x 15cm FOV, scatter profiles of the anthropomorphic head phantoms were estimated then iteratively modified to minimize the structured noise due to the varying grid-line artifacts across the FOV. Images of the anthropomorphic head phantoms taken with the grid, before and after the corrections, were compared demonstrating almost total elimination of the artifact over the full FOV. Hence, with proper computational tools, antiscatter grid artifacts can be corrected, even during dynamic sequences.
Calculation of Leakage Inductance for High Frequency Transformers
DEFF Research Database (Denmark)
Ouyang, Ziwei; Jun, Zhang; Hurley, William Gerard
2015-01-01
Frequency dependent leakage inductance is often observed. High frequency eddy current effects cause a reduction in leakage inductance. The proximity effect between adjacent layers is responsible for the reduction of leakage inductance. This paper gives a detailed analysis of high frequency leakage...... inductance and proposes an accurate prediction methodology. High frequency leakage inductances in several interleaved winding configurations are also discussed. Interleaved winding configurations actually give a smaller degree of reduction of leakage induction at high frequency. Finite Element Analysis (FEA...
Frequency metrology using highly charged ions
Crespo López-Urrutia, J. R.
2016-06-01
Due to the scaling laws of relativistic fine structure splitting, many forbidden optical transitions appear within the ground state configurations of highly charged ions (HCI). In some hydrogen-like ions, even the hyperfine splitting of the 1s ground state gives rise to optical transitions. Given the very low polarizability of HCI, such laser-accessible transitions are extremely impervious to external perturbations and systematics that limit optical clock performance and arise from AC and DC Stark effects, such as black-body radiation and light shifts. Moreover, AC and DC Zeeman splitting are symmetric due to the much larger relativistic spin-orbit coupling and corresponding fine-structure splitting. Appropriate choice of states or magnetic sub-states with suitable total angular momentum and magnetic quantum numbers can lead to a cancellation of residual quadrupolar shifts. All these properties are very advantageous for the proposed use of HCI forbidden lines as optical frequency standards. Extremely magnified relativistic, quantum electrodynamic, and nuclear size contributions to the binding energies of the optically active electrons make HCI ideal tools for fundamental research, as in proposed studies of a possible time variation of the fine structure constant. Beyond this, HCI that cannot be photoionized by vacuum-ultraviolet photons could also provide frequency standards for future lasers operating in that range.
High-frequency laser sonar system
Cray, Benjamin A.; Sarma, Ashwin; Kirsteins, Ivars P.
2002-11-01
A set of measurements recently completed at the Naval Undersea Warfare Center (NUWC) demonstrated that a laser-based sonar system can be used to detect acoustic particle velocity on the surface of a thin acoustically-compliant plate embedded beneath a standard acoustic window. The theoretical acoustic and measured surface particle velocity varied by less than 1 dB (reference m/s) over a wide frequency band (10 kHz to 100 kHz). However, the Polytec Model PSV-100 Scanning Laser Vibrometer System (SLVS) used in the experiments had relatively poor acoustic sensitivity, presumably due to high electronic noise, speckle noise, stand-off distance, and drifting laser focus. The laser's acoustic sensitivity appears to be inversely proportional to the backscatter signal level. The existing SLVS can sample a grid of 512 by 512 points, with each grid point having a spot size of approximately 10 mm (0.0004 in.). Such fine sampling may be used to create essentially a continuous aperture, eliminating acoustic grating lobes at all frequencies of practical sonar interest.
Plasma effects in high frequency radiative transfer
Alonso, C. T.
1981-02-01
A survey of collective plasma processes which can affect the transfer of high frequency radiation in a hot dense plasma is given. For pedagogical reasons plasma processes are examined by relating them to a particular reference plasma which consists of fully ionized carbon at a temperature kT = 1 KeV (ten million degrees Kelvin) and an electron density N = 3 x 10 to the 23rd power/cu cm, (which corresponds to a mass density rho = 1 gm/cu cm) and an ion density N sub i = 5 x 10 to the 22nd power/cu cm. The transport of photons, ranging from 1 eV to 1 KeV in energy, in such plasmas is considered. Such photons are to be used as diagnostic probes of hot dense laboratory plasmas.
QCD factorization for forward hadron scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Ermolaev, B.I. [Ioffe Physico-Technical Institute, St. Petersburg (Russian Federation); Greco, M. [University Roma Tre, Department of Physics, Rome (Italy); INFN, Rome (Italy); Troyan, S.I. [St. Petersburg Institute of Nuclear Physics, Gatchina (Russian Federation)
2012-03-15
We consider the QCD factorization of DIS structure functions at small x and amplitudes of 2{yields}2 hadronic forward scattering at high energy. We show that both collinear and k{sub T} -factorization for these processes can be obtained approximately as reductions of a more general (totally unintegrated) form of the factorization. The requirement of ultraviolet and infrared stability of the factorization convolutions allows us to obtain restrictions on the fits for the parton distributions in k{sub T} - and collinear factorization. (orig.)
{alpha}-Glycine under high pressures: a Raman scattering study
Energy Technology Data Exchange (ETDEWEB)
Murli, Chitra; Sharma, S.M.Surinder M.; Karmakar, S.; Sikka, S.K
2003-11-01
High-pressure behaviour of {alpha}-glycine has been investigated up to {approx}23 GPa using Raman scattering technique. The experimental results show slope change in the CO{sub 2} bending, NH{sub 3} torsional and NH{sub 3} rocking modes around 3 GPa and are interpreted in terms of change in the nature of an N-H...O-C intra-layer hydrogen bond at this pressure. Several other spectral features seem to arise from pressure-induced variations in the inter-molecular coupling.
High duty cycle inverse Compton scattering X-ray source
Ovodenko, A.; Agustsson, R.; Babzien, M.; Campese, T.; Fedurin, M.; Murokh, A.; Pogorelsky, I.; Polyanskiy, M.; Rosenzweig, J.; Sakai, Y.; Shaftan, T.; Swinson, C.
2016-12-01
Inverse Compton Scattering (ICS) is an emerging compact X-ray source technology, where the small source size and high spectral brightness are of interest for multitude of applications. However, to satisfy the practical flux requirements, a high-repetition-rate ICS system needs to be developed. To this end, this paper reports the experimental demonstration of a high peak brightness ICS source operating in a burst mode at 40 MHz. A pulse train interaction has been achieved by recirculating a picosecond CO2 laser pulse inside an active optical cavity synchronized to the electron beam. The pulse train ICS performance has been characterized at 5- and 15- pulses per train and compared to a single pulse operation under the same operating conditions. With the observed near-linear X-ray photon yield gain due to recirculation, as well as noticeably higher operational reliability, the burst-mode ICS offers a great potential for practical scalability towards high duty cycles.
A Model for High Energy Scattering in Quantum Gravity
Banks, T; Banks, Tom; Fischler, Willy
1999-01-01
We present a model for high energy two body scattering in a quantum theory of gravity. The model is applicable for center of mass energies higher than the relevant Planck scale. At impact parameters smaller than the Schwarzchild radius appropriate to the center of mass energy and total charge of the initial state, the cross section is dominated by an inelastic process in which a single large black hole is formed. The black hole then decays by Hawking radiation. The elastic cross section is highly suppressed at these impact parameters because of the small phase space for thermal decay into a high energy two body state. For very large impact parameter the amplitude is dominated by eikonalized single graviton exchange. At intermediate impact parameters the scattering is more complicated, but since the Schwarzchild radius grows with energy, we speculate that a more sophisticated eikonal calculation which uses the nonlinear classical solutions of the field equations may provide a good approximation at all larger i...
Effect of high-frequency excitation on natural frequencies of spinning discs
DEFF Research Database (Denmark)
Hansen, Morten Hartvig
2000-01-01
The effect of high-frequency, non-resonant parametric excitation on the low-frequency response of spinning discs is considered. The parametric excitation is obtained through a non-constant rotation speed, where the frequency of the pulsating overlay is much higher than the lowest natural frequenc...
Attenuation of high-frequency seismic waves in northeast India
Padhy, Simanchal; Subhadra, N.
2010-04-01
We studied attenuation of S and coda waves, their frequency and lapse time dependencies in northeast India in the frequency range of 1-24 Hz. We adopted theories of both single and multiple scattering to bandpass-filtered seismograms to fit coda envelopes to estimate Q for coda waves (QC) and Q for S-waves (QS) at five central frequencies of 1.5, 3, 6, 12 and 24 Hz. The selected data set consists of 182 seismograms recorded at ten seismic stations within epicentral distance of 22-300 km in the local magnitude range of 2.5-5.2. We found that with the increase in lapse time window from 40 to 60 s, Q0 (QC at 1 Hz) increases from 213 to 278, while the frequency dependent coefficient n decreases from 0.89 to 0.79. Both QC and QS increase with frequency. The average value of QS obtained by using coda normalization method for NE India has the power law form of (96.8 +/- 21.5)f(1.03+/-0.04) in 1-24 Hz. We adopted energy flux model (EFM) and diffusion model for the multiple scattered wave energy in three-dimensions. The results show that the contribution of multiple scattering dominates for longer lapse time close to or larger than mean free time of about 60 s. The estimates of QC are overestimated at longer lapse time by neglecting the effects of multiple scattering. Some discrepancies have been observed between the theoretical predictions and the observations, the difference could be due to the approximation of the uniform medium especially at large hypocentral distances. Increase in QC with lapse time can be explained as the result of the depth dependent attenuation properties and multiple scattering effect.
Cannon, Paul S.; Weitzen, Jay A.; Ostergaard, Jens; Rasmussen, John E.
1996-09-01
We have analyzed the duty cycle, due to ionospheric propagation, of very high frequency sounding signals for both polar cap and auroral paths. We find that at 35 and 45 MHz the propagation is often sustained by sporadic E layers and other nonmeteoric modes rather than by meteor scatter. At the higher frequencies of 65 and 85 MHz we find that the path is generally dominated by meteor scatter modes. These results have important ramifications for frequency reuse and security in meteor burst communications systems and for the development of extended frequency range HF systems (above 30 MHz) with a capability to operate on any available propagation mode. The diurnal, seasonal, and geomagnetic variations of the nonmeteoric duty cycle have been examined. A polar cap path model is presented for the nonmeteoric duty cycle as a function of geomagnetic activity.
Zweiphenning, W. J E M; van 't Klooster, M. A.; van Diessen, E.; van Klink, N. E C; Huiskamp, G. J M|info:eu-repo/dai/nl/074463640; Gebbink, T. A.; Leijten, F. S S|info:eu-repo/dai/nl/152243054; Gosselaar, P. H.|info:eu-repo/dai/nl/304813990; Otte, W. M.|info:eu-repo/dai/nl/168455706; Stam, C. J.; Braun, K. P J|info:eu-repo/dai/nl/207237239; Zijlmans, G. J M|info:eu-repo/dai/nl/304819581
2016-01-01
OBJECTIVE: High frequency oscillations (HFOs; > 80 Hz), especially fast ripples (FRs, 250-500 Hz), are novel biomarkers for epileptogenic tissue. The pathophysiology suggests enhanced functional connectivity within FR generating tissue. Our aim was to determine the relation between brain areas
Directory of Open Access Journals (Sweden)
W.J.E.M. Zweiphenning
2016-01-01
Significance: ‘Baseline’ high-frequency network parameters might help intra-operative recognition of epileptogenic tissue without the need for waiting for events. These findings can increase our understanding of the ‘architecture’ of epileptogenic networks and help unravel the pathophysiology of HFOs.
Giovanneschi, F.; Gonzalez-Huici, M. A.; Uschkerat, U.
2013-06-01
In this work we present a comprehensive analysis of the scattered signals from buried landmine-like targets via accurate numerical modeling of Ground Penetrating Radar (GPR) responses considering various antenna-soil-target scenarios. Different characteristics in time and frequency domain are extracted and interpreted for each configuration. The acquired knowledge is useful to better understand the scattering mechanisms of subsurface objects and can be incorporated to target recognition procedures. A brief explanation of the results is also provided together with an overview of the most relevant temporal and spectral features encountered.
Low-noise on-chip frequency conversion by four-wave-mixing Bragg scattering in SiNx waveguides
Agha, Imad; Thurston, Bryce; Srinivasan, Kartik
2012-01-01
Low-noise, tunable wavelength-conversion through non-degenerate four-wave mixing Bragg scattering in SiNx waveguides is experimentally demonstrated. Finite element method simulations of waveguide dispersion are used with the split-step Fourier method to predict device performance, and indicate a strong dependence of the conversion efficiency on phase matching, which is controlled by the waveguide geometry. Two 1550 nm wavelength band pulsed pumps are used to achieve tunable conversion of a 980 nm signal over a range of 5 nm with a peak conversion efficiency of \\approx 5 %. The demonstrated Bragg scattering process is suitable for frequency conversion of quantum states of light.
Zhou, Yanguang; Hu, Ming
2017-03-01
Understanding phonon transport across interfaces serves as a major tool to advance a diverse spectrum of fundamental and applied research. Unlike bulk materials, where the three-phonon scattering process is relatively straightforward to investigate, little research has been dedicated to the detailed analysis of the three-phonon scattering process at interfaces due to the complexity of interfaces and the mismatch of phonon dispersions of the two connecting parts. Based on the nonequilibrium molecular dynamics simulation, which is one of the most popular approaches to investigate the thermal conductance, we develop an explicit theoretical framework by considering the full third-order force constants field to quantify the two- and three-phonon scattering at interfaces. Bulk Ar is used as a benchmark to validate the computational scheme by comparing the results with those using the all-order phonon scattering method [frequency-dependent directly decomposed method; Y. Zhou and M. Hu, Phys. Rev. B 92, 195205 (2015), 10.1103/PhysRevB.92.195205]. Then, Ar-heavy Ar and Si-Ge interfaces are studied and the respective role of two- and three-phonon scattering processes is quantitatively characterized at different temperatures. Moreover, all four different types of the three-phonon scattering process are explicitly evaluated. The method developed herein for splitting the two- and three-phonon scattering processes in the interfacial heat transport is expected to advance our understanding of the phonon process at interfaces, and will facilitate designing high-performance interfacial structures in terms of efficient thermal management.
Liu, Zheng; Lin, Zhifang; Chui, S T
2004-01-01
The Mie scattering of electromagnetic waves of wave vector k by spherical negative-refractive-index particles of radius a exhibits an unusual resonance at ka-->0. The scattering enhancement from the ka-->0 resonance is insensitive to the size of scatterers, distinct from the Mie scattering resonances from positive-refractive-index particles. For media consisting of a collection of the negative-refractive-index particles, the unusual resonance results in a significant reduction of the localization parameter, providing a possibility to reach the light localization transition by reducing the wave vector k, in analogy to electronic systems.
Circular dichroism in free-free transitions of high energy electron-atom scattering
Cionga, Aurelia; Zloh, Gabriela; 10.1103/PhysRevA.62.063406
2013-01-01
We consider high energy electron scattering by hydrogen atoms in the presence of a laser field of moderate power and higher frequencies. If the field is a superposition of a linearly and a circularly polarized laser beam in a particular configuration, then we can show that circular dichroism in two photon transitions can be observed not only for the differential but also for the integrated cross sections, provided the laser-dressing of the atomic target is treated in second order perturbation theory and the coupling between hydrogenic bound and continuum states is involved.
High frequency band crossings in ^168Lu.
Roux, D. G.; Li, Y.; Ma, W. C.; Amro, H.; Thompson, J.; Winger, J.; Hagemann, G.; Herskind, B.; Jensen, D.; Sletten, G.; Wilson, J.; Fallon, P.; Diamond, R.; Goergen, A.; Machiavelli, A.; Ward, D.; Hübel, H.; Domscheit, J.
2003-10-01
High spin states in ^168Lu were populated using the ^123Sb(^48Ca,3n) reaction at 203 MeV. The beam was provided by the 88" cyclotron at LBNL, and coincident gamma rays were detected with the Gammasphere spectrometer array. An analysis of the data which had been sorted into three- and four- dimensional histograms confirmed the four previously known (J.H.Ha et al. J. Phys. Soc. Japan 71 (2002) 1663-1671) pairs of signature partner bands and extended them to considerably higher spins (in one case up to a tentative 50 hbar). In addition, a new pair of signature partners, as well as a new doubly decoupled band were found. On the basis of the present data, the configuration of one of the known bands, previously assigned π d_3/2 øtimes ν i_13/2 was reassigned as π d_5/2 øtimes ν i_13/2. High frequency band crossings, beyond the first ν i_13/2 alignment, were observed for the first time. These results will be discussed with reference to Cranking Shell Model calculations.
Plant Responses to High Frequency Electromagnetic Fields
Directory of Open Access Journals (Sweden)
Alain Vian
2016-01-01
Full Text Available High frequency nonionizing electromagnetic fields (HF-EMF that are increasingly present in the environment constitute a genuine environmental stimulus able to evoke specific responses in plants that share many similarities with those observed after a stressful treatment. Plants constitute an outstanding model to study such interactions since their architecture (high surface area to volume ratio optimizes their interaction with the environment. In the present review, after identifying the main exposure devices (transverse and gigahertz electromagnetic cells, wave guide, and mode stirred reverberating chamber and general physics laws that govern EMF interactions with plants, we illustrate some of the observed responses after exposure to HF-EMF at the cellular, molecular, and whole plant scale. Indeed, numerous metabolic activities (reactive oxygen species metabolism, α- and β-amylase, Krebs cycle, pentose phosphate pathway, chlorophyll content, terpene emission, etc. are modified, gene expression altered (calmodulin, calcium-dependent protein kinase, and proteinase inhibitor, and growth reduced (stem elongation and dry weight after low power (i.e., nonthermal HF-EMF exposure. These changes occur not only in the tissues directly exposed but also systemically in distant tissues. While the long-term impact of these metabolic changes remains largely unknown, we propose to consider nonionizing HF-EMF radiation as a noninjurious, genuine environmental factor that readily evokes changes in plant metabolism.
The transmission coefficient distribution of highly scattering sparse random media
Jin, Curtis; Nadakuditi, Raj Rao; Michielssen, Eric
2015-01-01
We consider the distribution of the transmission coefficients, i.e. the singular values of the modal transmission matrix, for 2D random media with periodic boundary conditions composed of a large number of point-like non-absorbing scatterers. The scatterers are placed at random locations in the medium and have random refractive indices that are drawn from an arbitrary, known distribution. We construct a randomized model for the scattering matrix that retains scatterer dependent properties ess...
Discrete ordinates transport methods for problems with highly forward-peaked scattering
Energy Technology Data Exchange (ETDEWEB)
Pautz, S.D.
1998-04-01
The author examines the solutions of the discrete ordinates (S{sub N}) method for problems with highly forward-peaked scattering kernels. He derives conditions necessary to obtain reasonable solutions in a certain forward-peaked limit, the Fokker-Planck (FP) limit. He also analyzes the acceleration of the iterative solution of such problems and offer improvements to it. He extends the analytic Fokker-Planck limit analysis to the S{sub N} equations. This analysis shows that in this asymptotic limit the S{sub N} solution satisfies a pseudospectral discretization of the FP equation, provided that the scattering term is handled in a certain way (which he describes) and that the analytic transport solution satisfies an analytic FP equation. Similar analyses of various spatially discretized S{sub N} equations reveal that they too produce solutions that satisfy discrete FP equations, given the same provisions. Numerical results agree with these theoretical predictions. He defines a multidimensional angular multigrid (ANMG) method to accelerate the iterative solution of highly forward-peaked problems. The analyses show that a straightforward application of this scheme is subject to high-frequency instabilities. However, by applying a diffusive filter to the ANMG corrections he is able to stabilize this method. Fourier analyses of model problems show that the resulting method is effective at accelerating the convergence rate when the scattering is forward-peaked. The numerical results demonstrate that these analyses are good predictors of the actual performance of the ANMG method.
Berger, D
2000-01-01
scanning electron microscope is examined. By means of the scattering at mono-crystalline samples the influence of channeling (anomalous absorption and transmission) on backscattered electron spectra is shown. Captions are given in English language. This work presents high resolution measurements of the energy and complete angular distribution of the scattering of 20 keV electrons (energy resolution 0.55%). The examinations include take-off angles close to the target surface and non-perpendicular incidences of electrons partly for the first time. The results are of interest for the understanding of fundamental scattering processes, the interpretation of signals and new detector systems in electron microscopy and electron spectroscopy. Furthermore, they are used for the verification of electron scattering models and simulations. The applied compact electrostatic spectrometers with spherical and toroidal geometries are characterized and compared. High resolution spectra are obtained by deconvolution of the measu...
High Energy Asymptotics of the Scattering Amplitude for the Schrödinger Equation
Indian Academy of Sciences (India)
D Yafaev
2002-02-01
We find an explicit function approximating at high energies the kernel of the scattering matrix with arbitrary accuracy. Moreover, the same function gives all diagonal singularities of the kernel of the scattering matrix in the angular variables.
Where is the value in high frequency trading?
Álvaro Cartea; José Penalva
2011-01-01
We analyze the impact of high frequency trading in financial markets based on a model with three types of traders: liquidity traders, market makers, and high frequency traders. Our four main findings are: i) The price impact of the liquidity trades is higher in the presence of the high frequency trader and is increasing with the size of the trade. In particular, we show that the high frequency trader reduces (increases) the prices that liquidity traders receive when selling (buying) their equ...
Contact resistance measurement structures for high frequencies
Roy, Deepu; Pijper, Ralf M.T.; Tiemeijer, Luuk F.; Wolters, Robertus A.M.
2011-01-01
Knowledge of the interfacial contact impedance offered by the device at its operating frequency range is crucial for accurate modelling and understanding of the device. In this article, a novel modified TLM test-structure has been devised to extract interfacial contact parameters at frequencies upto
Correcting for Interstellar Scattering Delay in High-precision Pulsar Timing: Simulation Results
Palliyaguru, Nipuni; McLaughlin, Maura; Demorest, Paul; Jones, Glenn
2015-01-01
Light travel time changes due to gravitational waves may be detected within the next decade through precision timing of millisecond pulsars. Removal of frequency-dependent interstellar medium (ISM) delays due to dispersion and scattering is a key issue in the detection process. Current timing algorithms routinely correct pulse times of arrival (TOAs) for time-variable delays due to cold plasma dispersion. However, none of the major pulsar timing groups correct for delays due to scattering from multi-path propagation in the ISM. Scattering introduces a frequency-dependent phase change in the signal that results in pulse broadening and arrival time delays. Any method to correct the TOA for interstellar propagation effects must be based on multi-frequency measurements that can effectively separate dispersion and scattering delay terms from frequency-independent perturbations such as those due to a gravitational wave. Cyclic spectroscopy, first described in an astronomical context by Demorest (2011), is a potenti...
Luce, H.; RöTtger, J.; Crochet, M.; Yamamoto, M.; Fukao, S.
2000-09-01
In the companion paper (part 1), theoretical studies on the dual frequency domain interferometry (FDI) technique have been presented. Two possible causes of biases in the layer thickness and position estimations by FDI have been considered: the limited extent of the scattering structure in the horizontal plane and the advection of this structure by the wind. In the present work, we study the effects of the tilts of the scattering layer from horizontal. It is shown that in case of large tilt angles, substantial biases on position and thickness can occur. The model, first developed by Liu and Pan [1993] but more extensively described in this paper, can also be used for a prediction of the variations of the FDI coherence with the zenith angle and their relation to the anisotropy of the scatterers. Some preliminary observations of the zenith angle dependence of the FDI coherence and echo power obtained with the middle and upper atmosphere (MU) radar from the vertical up to 28° off zenith with a step of 2° are shown and discussed. In principle, comparisons between the observed power and coherence variations with those given by the model could give more information on the structures that contribute around and far from the zenith.
Kang, Sungsam; Kang, Pilsung; Yang, Taeseok D; Ahn, Joonmo; Song, Kyungdeok; Choi, Wonshik
2016-01-01
Thick biological tissues give rise to not only the scattering of incoming light waves, but also aberrations of the remaining unscattered waves. Due to the inability of existing optical imaging methodologies to overcome both of these problems simultaneously, imaging depth at the sub- micron spatial resolution has remained extremely shallow. Here we present an experimental approach for identifying and eliminating aberrations even in the presence of strong multiple light scattering. For time-gated complex-field maps of reflected waves taken over various illumination channels, we identify two sets of aberration correction maps, one for the illumination path and one for the reflection path, that can preferentially accumulate the unscattered signal waves over the multiple-scattered waves. By performing closed-loop optimization for forward and phase- conjugation processes, we demonstrated a spatial resolution of 600 nm up to the unprecedented imaging depth of 7 scattering mean free paths.
A Method for Gray-Scale Imaging of Blood Flow Using High-Frequency Ultrasound.
Yang, Jun; Pang, Chao; Song, Xue-Dong; Gao, Xuan
2017-07-01
This paper presents a new method that complements current techniques available in the high-frequency blood imaging field. A comprehensive scattering model was established to determine the feasibility and frequency range of the blood flow imaging of superficial organs and tissues using high-frequency ultrasound. The transmitting and receiving modes and an algorithm were designed to obtain blood flow information based on differentiation between tissues and blood flow. The system was created and tested first with a model that simulates blood flow and was then used on human tissue. A fine-scale image of a blood vessel could be obtained with this system. Moreover, this method can obtain weak blood flow signal using single pulse rather than the traditional pulse-code method and maintains a high resolution that can be matched to high-frequency structural imaging. This study provides a reliable method for further applications related to diagnoses of superficial organs.
Electron Scattering From a High-Momentum Neutron in Deuterium
Energy Technology Data Exchange (ETDEWEB)
Klimenko, Alexei [Old Dominion Univ., Norfolk, VA (United States)
2004-05-01
The deuterium nucleus is a system of two nucleons (proton and neutron) bound together. The configuration of the system is described by a quantum-mechanical wave function and the state of the nucleons at a given time is not know a priori. However, by detecting a backward going proton of moderate momentum in coincidence with a reaction taking place on the neutron in deuterium, the initial state of that neutron can be inferred if we assume that the proton was a spectator to the reaction. This method, known as spectator tagging, was used to study the electron scattering from high-momentum neutrons in deuterium. The data were taken with a 5.765 GeV polarized electron beam on a deuterium target in Jefferson Laboratory's Hall B, using the CLAS detector. The accumulated data cover a wide kinematic range, reaching values of the invariant mass of the unobserved final state W* up to 3 GeV. A data sample of approximately 5 - 10^{5} events, with protons detected at large scattering angles (as high as 136 degrees) in coincidence with the forward electrons, was selected. The product of the neutron structure function with the initial nucleon momentum distribution F_{2n}. S was extracted for different values of W*, backward proton momenta p_{s} and momentum transfer Q^{2}. The data were compared to a calculation based on the spectator approximation and using the free nucleon form factors and structure functions. A strong enhancement in the data, not reproduced by the model, was observed at cos(theta_{pq}) > -0.3 (where theta{sub pq} is the proton scattering angle relative to the direction of the momentum transfer) and can be associated with the contribution of final state interactions (FSI) that were not incorporated into the model. The bound nucleon structure function F_{2n} was studied in the region cos(theta_{pq}) < -0.3 as a function of W* and scaling variable x*. At high spectator proton momenta the struck neutron is
Liu, Xiaodong
2017-08-01
A sampling method by using scattering amplitude is proposed for shape and location reconstruction in inverse acoustic scattering problems. Only matrix multiplication is involved in the computation, thus the novel sampling method is very easy and simple to implement. With the help of the factorization of the far field operator, we establish an inf-criterion for characterization of underlying scatterers. This result is then used to give a lower bound of the proposed indicator functional for sampling points inside the scatterers. While for the sampling points outside the scatterers, we show that the indicator functional decays like the bessel functions as the sampling point goes away from the boundary of the scatterers. We also show that the proposed indicator functional continuously depends on the scattering amplitude, this further implies that the novel sampling method is extremely stable with respect to errors in the data. Different to the classical sampling method such as the linear sampling method or the factorization method, from the numerical point of view, the novel indicator takes its maximum near the boundary of the underlying target and decays like the bessel functions as the sampling points go away from the boundary. The numerical simulations also show that the proposed sampling method can deal with multiple multiscale case, even the different components are close to each other.
Vieira, H. S.; Bezerra, V. B.
2016-10-01
We apply the confluent Heun functions to study the resonant frequencies (quasispectrum), the Hawking radiation and the scattering process of scalar waves, in a class of spacetimes, namely, the ones generated by a Kerr-Newman-Kasuya spacetime (dyon black hole) and a Reissner-Nordström black hole surrounded by a magnetic field (Ernst spacetime). In both spacetimes, the solutions for the angular and radial parts of the corresponding Klein-Gordon equations are obtained exactly, for massive and massless fields, respectively. The special cases of Kerr and Schwarzschild black holes are analyzed and the solutions obtained, as well as in the case of a Schwarzschild black hole surrounded by a magnetic field. In all these special situations, the resonant frequencies, Hawking radiation and scattering are studied.
High permeability-high frequency stable MnZn ferrites
Energy Technology Data Exchange (ETDEWEB)
Kalarus, J. [Ferroxcube Polska, 96-100 Skierniewice (Poland); Kogias, G., E-mail: kogias@cperi.certh.gr [Centre for Research and Technology-Hellas, Chemical Process Engineering Research Institute, Laboratory of Inorganic Materials, 57001 Thessaloniki (Greece); Aristotle University of Thessaloniki, Department of Chemical Engineering, Laboratory of Materials Technology, 54124 Thessaloniki (Greece); Holz, D. [Ferroxcube Polska, 96-100 Skierniewice (Poland); Zaspalis, V.T. [Centre for Research and Technology-Hellas, Chemical Process Engineering Research Institute, Laboratory of Inorganic Materials, 57001 Thessaloniki (Greece); Aristotle University of Thessaloniki, Department of Chemical Engineering, Laboratory of Materials Technology, 54124 Thessaloniki (Greece)
2012-09-15
Modern MnZn ferrite applications require high magnetic initial permeability and exceptional frequency stability; the former implies large grains, while the latter high grain boundary resistivity. In this article the optimization of the final firing process is described for achieving both. The optimization is based on the homogeneous dissolution of dopants under oxidative conditions and their subsequent precipitation along grain boundaries. This was accomplished by integrating isothermal plateaus at the upper stadia of the cooling stage of the final firing process. MnZn ferrites of the basic composition [Mn{sub 0.47}Zn{sub 0.47}Fe{sub 0.06}{sup 2+}]Fe{sub 2}{sup 3+}O{sub 4} were synthesized with initial permeability (measured at f=10 kHz, B<0.1 mT, T=25 Degree-Sign C) 12,600 and losses, expressed as tan({delta})/{mu}{sub i}, of 3.1 Multiplication-Sign 10{sup -6} at 10 kHz and 20.5 Multiplication-Sign 10{sup -6} at 100 kHz (B<0.1 mT, T=25 Degree-Sign C), that reflect good frequency stability. These results could be reproduced in pilot production scale. - Highlights: Black-Right-Pointing-Pointer Optimization of sintering is described for achieving high initial permeability. Black-Right-Pointing-Pointer Optimization of sintering is described for receiving frequency stability. Black-Right-Pointing-Pointer For high permeability, high densities and large grain sizes are required. Black-Right-Pointing-Pointer The achieved initial permeability is higher than 12,500. Black-Right-Pointing-Pointer The losses, tan({delta})/{mu}{sub i}, are 3.1 Multiplication-Sign 10{sup -6} at 10 kHz and 20.5 Multiplication-Sign 10{sup -6} at 100 kHz.
Zweiphenning, W J E M; van 't Klooster, M A; van Diessen, E; van Klink, N E C; Huiskamp, G J M; Gebbink, T A; Leijten, F S S; Gosselaar, P H; Otte, W M; Stam, C J; Braun, K P J; Zijlmans, G J M
2016-01-01
High frequency oscillations (HFOs; > 80 Hz), especially fast ripples (FRs, 250-500 Hz), are novel biomarkers for epileptogenic tissue. The pathophysiology suggests enhanced functional connectivity within FR generating tissue. Our aim was to determine the relation between brain areas showing FRs and 'baseline' functional connectivity within EEG networks, especially in the high frequency bands. We marked FRs, ripples (80-250 Hz) and spikes in the electrocorticogram of 14 patients with refractory temporal lobe epilepsy. We assessed 'baseline' functional connectivity in epochs free of epileptiform events within these recordings, using the phase lag index. We computed the Eigenvector Centrality (EC) per channel in the FR and gamma band network. We compared EC between channels that did or did not show events at other moments in time. FR-band EC was higher in channels with than without spikes. Gamma-band EC was lower in channels with ripples and FRs. We confirmed previous findings of functional isolation in the gamma-band and found a first proof of functional integration in the FR-band network of channels covering presumed epileptogenic tissue. 'Baseline' high-frequency network parameters might help intra-operative recognition of epileptogenic tissue without the need for waiting for events. These findings can increase our understanding of the 'architecture' of epileptogenic networks and help unravel the pathophysiology of HFOs.
HIGH FREQUENCY INDUCTION WELDING OF HIGH SILICON STEEL TUBES
Directory of Open Access Journals (Sweden)
Ricardo Miranda Alé
2012-06-01
Full Text Available High-Si steel is a low cost alternative for the fabrication of tubular structures resistant to atmospheric corrosion. However, the literature has often pointed out that steels presenting a higher Si content and/or a lower Mn/Si ratio have higher susceptibility to defects at the weld bond line during HFIW (High Frequency Induction Welding process, which has been widely used for manufacturing small diameter tubes. In this study the effect of the HFIW conditions on the quality of steel tubes with high-Si content and low Mn/Si ratio is investigated. The quality of welded tubes was determined by flare test and the defects in the bond line were identified by SEM. It has been found that higher welding speeds, V-convergence angles and power input should be applied in welding of high-Si steel, when compared to similar strength C-Mn steel.
DBI skyrmion, high energy (large s) scattering and fireball production
Nastase, H
2005-01-01
We analyze the high energy scattering of hadrons in QCD in an effective theory model inspired from a gravity dual description. The nucleons are skyrmion-like solutions of a DBI action, and boosted nucleons give pions field shockwaves necessary for the saturation of the Froissart bound. Nuclei are analogs of BIon crystals, with the DBI skyrmions forming a fluid with a fixed inter-nucleon distance. In shockwave collisions one creates scalar (pion field) ``fireballs'' with horizons of nonzero temperature, whose scaling with mass we calculated. They are analogous to the hydrodynamic ``dumb holes,'' and their thermal horizons are places where the pion field becomes apparently singular. The information paradox becomes then a purely field theoretic phenomenon, not directly related to quantum gravity (except via AdS-CFT).
Propagation of coherent polarized light in turbid highly scattering medium.
Doronin, Alexander; Macdonald, Callum; Meglinski, Igor
2014-02-01
Within the framework of further development of unified Monte Carlo code for the needs of biomedical optics and biophotonics, we present an approach for modeling of coherent polarized light propagation in highly scattering turbid media, such as biological tissues. The temporal coherence of light, linear and circular polarization, interference, and the helicity flip of circularly polarized light due to reflection at the medium boundary and/or backscattering events are taken into account. To achieve higher accuracy in the results and to speed up the modeling, the implementation of the code utilizes parallel computing on NVIDIA graphics processing units using Compute Unified Device Architecture. The results of the simulation of coherent linearly and circularly polarized light are presented in comparison with the results of known theoretical studies and the results of alternative modelings.
Electron scattering by O2 at intermediate and high energies
Institute of Scientific and Technical Information of China (English)
Deheng Shi; Jinfeng Sun; Xiangdong Yang; Zunlue Zhu; Yufang Liu
2005-01-01
@@ A complex optical model potential correlated by the concept of bonded atoms, which considers the overlapping effect of electron clouds between two atoms in a molecule, is firstly employed to calculate the absolute differential cross sections, the integrated and momentum transfer cross sections for electrons scattered by O2 at intermediate and high energies by using additivity rule model at Hartree-Fock level. In the study,the complex optical model potential is composed of static, exchange, correlation polarization plus absorption contributions. The quantitative absolute differential cross sections, the integrated and momentum transfer cross sections are obtained. Compared with available experimental data, this approach presents good results. It is shown that the additivity rule model together with the complex optical model potential correlated by the concept of bonded atoms is completely suitable for the calculations of the absolute differential cross sections, the integrated and momentum transfer cross sections.
The High Energy Asymptotics of Scattering Processes in QCD
Energy Technology Data Exchange (ETDEWEB)
Enberg, Rikard; Golec-Biernat, K.; Munier, S.
2005-05-12
High energy scattering in the QCD parton model was recently shown to be a reaction-diffusion process, and thus to lie in the universality class of the stochastic Fisher-Kolmogorov-Petrovsky-Piscounov equation. We recall that the latter appears naturally in the context of the parton model. We provide a thorough numerical analysis of the mean field approximation, given in QCD by the Balitsky-Kovchegov equation. In the framework of a simple stochastic toy model that captures the relevant features of QCD, we discuss and illustrate the universal properties of such stochastic models. We investigate in particular the validity of the mean field approximation and how it is broken by fluctuations. We find that the mean field approximation is a good approximation in the initial stages of the evolution in rapidity.
Mid-Frequency Scattering and Reverberation in a Very Shallow Water Environment
2015-09-30
Backscatter) approximation developed by De Wolf (1971) for studying electromagnetic propagation and multiple scattering effects in a turbulent atmosphere...scattering (ensonified) volume, with a span of ranges and a span of azimuthal angles based on the system directivity and the radiated pulse duration, Ivakin...understanding TREX2013 data: • To account for sediment lateral variability, mud patches/strips, using more advanced PE codes for Green’s
1982-05-21
Graduation Date : around end of Mar. 82 Sept 79 - June 80 Ohio State University, Columbus, Ohio Enrolled in Graduate School , Department of Electrical...Tennis, Tennis, Badminton COLLEGE 145 OF ENGINEERING INIVERSITY OF ILLINOIS AT CHICAGO CIRCLE M.S. THESIS DEFENSE DATE: Friday, May 21, 1052 TIME: 1:00 p.m
A CMOS image sensor using high-speed lock-in pixels for stimulated Raman scattering
Lioe, DeXing; Mars, Kamel; Takasawa, Taishi; Yasutomi, Keita; Kagawa, Keiichiro; Hashimoto, Mamoru; Kawahito, Shoji
2016-03-01
A CMOS image sensor using high-speed lock-in pixels for stimulated Raman scattering (SRS) spectroscopy is presented in this paper. The effective SRS signal from the stimulated emission of SRS mechanism is very small in contrast to the offset of a probing laser source, which is in the ratio of 10-4 to 10-5. In order to extract this signal, the common offset component is removed, and the small difference component is sampled using switched-capacitor integrator with a fully differential amplifier. The sampling is performed over many integration cycles to achieve appropriate amplification. The lock-in pixels utilizes high-speed lateral electric field charge modulator (LEFM) to demodulate the SRS signal which is modulated at high-frequency of 20MHz. A prototype chip is implemented using 0.11μm CMOS image sensor technology.
High frequency model of stacked film capacitors
Talbert, T.; Joubert, C.; Daude, N.; Glaize, C.
2001-11-01
Polypropylene metallized capacitors are of general use in power electronics because of their reliability, their self-healing capabilities, and their low price. Though the behavior of metallized coiled capacitors has been discussed, no work has been carried out on stacked and flattened metallized capacitors. The purpose of this article is to suggest an analytical model of resonance frequency, stray inductance and impedance of stacked capacitors. We first solve the equation of propagation of the magnetic potential vector (A) in the dielectric of an homogeneous material. Then, we suggest an original method of resolution, like the one used for resonant cavities, in order to present an analytical solution of the problem. Finally, we give some experimental results proving that the physical knowledge of the parameters of the capacitor (dimension of the component, and material constants), enables us to calculate an analytical model of resonance frequency, stray inductance and impedance of stacked capacitors.
High resolution electron scattering on {sup 96}Zr
Energy Technology Data Exchange (ETDEWEB)
Kremer, Christoph; Bassauer, Sergej; Krugmann, Andreas; Krumbholz, Anna Maria; Pietralla, Norbert; Singer, Maxim; Neumann-Cosel, Peter von [Institut fuer Kernphysik, TU Darmstadt (Germany)
2015-07-01
The low-energy structure of the nucleus {sup 96}Zr is interesting for numerous reasons - especially the strong octupole correlation leading to an excitation of the prominent 3{sup -}{sub 1} state with the largest known ground-state transition strength (B(E3, 3{sup +}{sub 1} → 0{sup +}{sub 1}) = 57(4) W.u.) of all nuclei. Even though this nucleus is a good testing ground for nuclear structure theories some low-energy observables are known with insufficient precision. Especially the transition strength of low-lying 2{sup +} states, which are important for the identification of mixed-symmetry states, have large uncertainties. Electron scattering at low impulse transfer has been shown to be capable of obtaining these B(E2) values with high precision. A {sup 96}Zr(e,e{sup '}) experiment has recently been performed at the superconducting electron linear accelerator S-DALINAC at Darmstadt using the high-resolution LINTOTT spectrometer. The experiment and preliminary results are presented.
Tian, Fengling; Huang, Wei; Yang, Jidong; Li, Qin
In pH 3.25-3.35 Britton-Robinson (BR) buffer solution, albendazole (ABZ) could react with eosin Y (EY) to form a 1:1 ion-association complex, which not only results in the quenching of fluorescence, but also resulted in the great enhancement of resonance Rayleigh scattering (RRS) and frequency doubling scattering (FDS). Furthermore, a new RRS spectrum will appear, and the maximum RRS wavelength was located at about 356 nm. The detection limit for ABZ were 21.51 ng mL-1 for the fluorophotometry, 6.93 ng mL-1 for the RRS method and 12.89 ng mL-1 for the FDS method. Among them, the RRS method had the highest sensitivity. The experimental conditions were optimized and effects of coexisting substances were evaluated. Meanwhile, the influences of coexisting substances were tested. The methods have been successfully applied to the determination of ABZ in capsules and human urine samples. The composition and structure of the ion-association complex and the reaction mechanism were discussed.
Robillard, Tony; Montealegre-Z, Fernando; Desutter-Grandcolas, Laure; Grandcolas, Philippe; Robert, Daniel
2013-06-01
Sound production in crickets relies on stridulation, the well-understood rubbing together of a pair of specialised wings. As the file of one wing slides over the scraper of the other, a series of rhythmic impacts causes harmonic oscillations, usually resulting in the radiation of pure tones delivered at low frequencies (2-8 kHz). In the short-winged crickets of the Lebinthini tribe, acoustic communication relies on signals with remarkably high frequencies (>8 kHz) and rich harmonic content. Using several species of the subfamily Eneopterinae, we characterised the morphological and mechanical specialisations supporting the production of high frequencies, and demonstrated that higher harmonics are exploited as dominant frequencies. These specialisations affect the structure of the stridulatory file, the motor control of stridulation and the resonance of the sound radiator. We placed these specialisations in a phylogenetic framework and show that they serve to exploit high-frequency vibrational modes pre-existing in the phylogenetic ancestor. In Eneopterinae, the lower frequency components are harmonically related to the dominant peak, suggesting they are relicts of ancestral carrier frequencies. Yet, such ghost frequencies still occur in the wings' free resonances, highlighting the fundamental mechanical constraints of sound radiation. These results support the hypothesis that such high-frequency songs evolved stepwise, by a form of punctuated evolution that could be related to functional constraints, rather than by only the progressive increase of the ancestral fundamental frequency.
Low velocity target detection based on time-frequency image for high frequency ground wave radar
Institute of Scientific and Technical Information of China (English)
YAN Songhua; WU Shicai; WEN Biyang
2007-01-01
The Doppler spectral broadening resulted from non-stationary movement of target and radio-frequency interference will decrease the veracity of target detection by high frequency ground wave(HEGW)radar.By displaying the change of signal energy on two dimensional time-frequency images based on time-frequency analysis,a new mathematical morphology method to distinguish target from nonlinear time-frequency curves is presented.The analyzed results from the measured data verify that with this new method the target can be detected correctly from wide Doppler spectrum.
Light extinction and scattering from individual and arrayed high-aspect-ratio trenches in metal
DEFF Research Database (Denmark)
Roberts, Alexander; Søndergaard, Thomas; Chirumamilla, Manohar
2016-01-01
for a two-dimensional scatterer. We construct a simple resonator model which predicts the wavelength-dependent extinction, scattering, and absorption cross section of the trench and compare the model findings with full numerical simulations. Both extinction and scattering cross sections are mainly...... determined by the wavelength and can reach highly supergeometric values. At wavelengths where the metal exhibits near perfect electrical conductor behavior, such trenches lend themselves to be used as self-normalizing scatterers, as their scattering cross section is independent of their geometry and depend...... and two-photon luminescence that the resonant behavior of the vertical trenches is preserved....
Energy Technology Data Exchange (ETDEWEB)
Chakraborty, A., E-mail: juimaha@yahoo.co [Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata (India); Sarkar, C.K. [Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata (India)
2011-04-01
The small signal high-frequency ac mobility of hot electrons in n-GaN in the extreme quantum limit at low- and high-temperatures has been calculated considering the non-equilibrium phonon distribution as well as the thermal phonon distributions. The energy loss rate has been calculated considering the dominance of the piezo electric coupling scattering and the polar optical phonon scattering while the momentum loss rate has been calculated considering the acoustic phonon scattering via deformation potential and the piezo electric coupling and the dislocation scattering.
High-frequency homogenization of zero frequency stop band photonic and phononic crystals
Antonakakis, Tryfon; Guenneau, Sebastien
2013-01-01
We present an accurate methodology for representing the physics of waves, for periodic structures, through effective properties for a replacement bulk medium: This is valid even for media with zero frequency stop-bands and where high frequency phenomena dominate. Since the work of Lord Rayleigh in 1892, low frequency (or quasi-static) behaviour has been neatly encapsulated in effective anisotropic media. However such classical homogenization theories break down in the high-frequency or stop band regime. Higher frequency phenomena are of significant importance in photonics (transverse magnetic waves propagating in infinite conducting parallel fibers), phononics (anti-plane shear waves propagating in isotropic elastic materials with inclusions), and platonics (flexural waves propagating in thin-elastic plates with holes). Fortunately, the recently proposed high-frequency homogenization (HFH) theory is only constrained by the knowledge of standing waves in order to asymptotically reconstruct dispersion curves an...
High-Frequency Axial Fatigue Test Procedures for Spectrum Loading
2016-07-20
REPORT NO: NAWCADPAX/TIM-2016/49 HIGH - FREQUENCY AXIAL FATIGUE TEST PROCEEDURES FOR SPECTRUM LOADING by David T. Rusk, AIR...OF THE NAVY NAVAL AIR WARFARE CENTER AIRCRAFT DIVISION PATUXENT RIVER, MARYLAND NAWCADPAX/TIM-2016/49 20 July 2016 HIGH - FREQUENCY AXIAL...Technical Information Memorandum 3. DATES COVERED 4. TITLE AND SUBTITLE High - Frequency Axial Fatigue Test Procedures for Spectrum Loading
Anomalous waiting times in high-frequency financial data
Scalas, E; Luckock, H; Mainardi, F; Mantelli, M; Raberto, M; Scalas, Enrico; Gorenflo, Rudolf; Luckock, Hugh; Mainardi, Francesco; Mantelli, Maurizio; Raberto, Marco
2004-01-01
In high-frequency financial data not only returns, but also waiting times between consecutive trades are random variables. Therefore, it is possible to apply continuous-time random walks (CTRWs) as phenomenological models of the high-frequency price dynamics. An empirical analysis performed on the 30 DJIA stocks shows that the waiting-time survival probability for high-frequency data is non-exponential. This fact imposes constraints on agent-based models of financial markets.
Sowmya, K; Stenflo, J O; Sampoorna, M
2015-01-01
$F$-state interference significantly modifies the polarization produced by scattering processes in the solar atmosphere. Its signature in the emergent Stokes spectrum in the absence of magnetic fields is depolarization in the line core. In the present paper, we derive the partial frequency redistribution (PRD) matrix that includes interference between the upper hyperfine structure states of a two-level atom in the presence of magnetic fields of arbitrary strengths. The theory is applied to the Na I D$_2$ line that is produced by the transition between the lower $J=1/2$ and upper $J=3/2$ states which split into $F$ states because of the coupling with the nuclear spin $I_s=3/2$. The properties of the PRD matrix for the single-scattering case is explored, in particular, the effects of the magnetic field in the Paschen--Back regime and their usefulness as a tool for the diagnostics of solar magnetic fields.
Sowmya, K.; Nagendra, K. N.; Stenflo, J. O.; Sampoorna, M.
2014-05-01
F-state interference significantly modifies the polarization produced by scattering processes in the solar atmosphere. Its signature in the emergent Stokes spectrum in the absence of magnetic fields is depolarization in the line core. In the present paper, we derive the partial frequency redistribution (PRD) matrix that includes interference between the upper hyperfine structure states of a two-level atom in the presence of magnetic fields of arbitrary strengths. The theory is applied to the Na I D2 line that is produced by the transition between the lower J = 1/2 and upper J = 3/2 states which split into F states because of the coupling with the nuclear spin Is = 3/2. The properties of the PRD matrix for the single-scattering case is explored, in particular, the effects of the magnetic field in the Paschen-Back regime and their usefulness as a tool for the diagnostics of solar magnetic fields.
A high frequency resonance gravity gradiometer
Energy Technology Data Exchange (ETDEWEB)
Bagaev, S. N.; Kvashnin, N. L.; Skvortsov, M. N. [Laser Physics Institute SB RAS, Novosibirsc (Russian Federation); Bezrukov, L. B.; Krysanov, V. A. [Institute of Nuclear Physics RAS, Moscow (Russian Federation); Oreshkin, S. I.; Motylev, A. M.; Popov, S. M.; Samoilenko, A. A.; Yudin, I. S. [Lomonosov MSU, Sternberg Astronomical Institute, Moscow (Russian Federation); Rudenko, V. N. [Institute of Nuclear Physics RAS, Moscow (Russian Federation); Lomonosov MSU, Sternberg Astronomical Institute, Moscow (Russian Federation)
2014-06-15
A new setup OGRAN—the large scale opto-acoustical gravitational detector is described. As distinguished from known gravitational bar detectors it uses the optical interferometrical readout for registering weak variations of gravity gradient at the kilohetz frequency region. At room temperature, its sensitivity is limited only by the bar Brownian noise at the bandwidth close to 100 Hz. It is destined for a search for rare events—gravitational pulses coincident with signals of neutrino scintillator (BUST) in the deep underground of Baksan Neutrino Observatory of INR RAS.
High-Q Contacted Ring Microcavities with Scatterer-Avoiding "Wiggler" Bloch Wave Supermode Fields
Liu, Yangyang
2014-01-01
High-Q ring resonators with contacts to the waveguide core provide a versatile platform for various applications in chip-scale optomechanics, thermo- and electro-optics. We propose and demonstrate a novel approach to implement azimuthally periodic contacted ring resonators based on multi-mode Bloch matching that support contacts on both the inner and outer radius edges with small degradation to the optical Q. Radiative coupling between degenerate modes of adjacent transverse spatial order leads to imaginary frequency (Q) splitting and a scatterer avoiding high-Q "wiggler" supermode field. We experimentally measure Q's up to 258,000 in devices fabricated in a silicon device layer on buried oxide undercladding, and up to 139,000 in devices fully suspended in air using an undercut step. Wiggler supermodes are true modes of the microphotonic system that offer new degrees of freedom in electrical, thermal and mechanical design.
High-Speed Low-Jitter Frequency Multiplication in CMOS
van de Beek, R.C.H.
2004-01-01
This thesis deals with high-speed Clock and Frequency Multiplication. The term `high-speedù applies to both the output and the reference frequency of the multiplier. Much emphasis is placed on analysis and optimization of the total timing inaccuracies, and on implementing a high-speed feedback
Optical Transmitter Terminal for Selective RF High Frequency Bans Project
National Aeronautics and Space Administration — The objective of the proposal work is to investigate the highly innovative conceptual design of an optical communication selective frequency transmitter terminal...
High-frequency Born synthetic seismograms based on coupled normal modes
Pollitz, Fred F.
2011-01-01
High-frequency and full waveform synthetic seismograms on a 3-D laterally heterogeneous earth model are simulated using the theory of coupled normal modes. The set of coupled integral equations that describe the 3-D response are simplified into a set of uncoupled integral equations by using the Born approximation to calculate scattered wavefields and the pure-path approximation to modulate the phase of incident and scattered wavefields. This depends upon a decomposition of the aspherical structure into smooth and rough components. The uncoupled integral equations are discretized and solved in the frequency domain, and time domain results are obtained by inverse Fourier transform. Examples show the utility of the normal mode approach to synthesize the seismic wavefields resulting from interaction with a combination of rough and smooth structural heterogeneities. This approach is applied to an ∼4 Hz shallow crustal wave propagation around the site of the San Andreas Fault Observatory at Depth (SAFOD).
Electron Scattering From High-Momentum Neutrons in Deuterium
Klimenko, A V; Ambrozewicz, P; Anghinolo, M; Asryan, G; Avakian, H; Bagdasaryan, H; Baillie, N; Ball, J P; Baltzell, N A; Barrow, S; Batourine, V; Battaglieri, M; Bedlinskiy, I; Bektasoglu, M; Bellis, M; Benmouna, N; Biselli, A S; Bltmann, S; Boiarinov, S; Bouchigny, S; Bradford, R; Branford, D; Brooks, W K; Burkert, V D; Butuceanu, C; Calarco, J R; Careccia, S L; Carman, D S; Cazes, A; Chen, S; Cole, P L; Coltharp, P; Cords, D; Corvisiero, P; Crabb, D; Cummings, J P; Dashyan, N B; De Sanctis, E; De Vita, R; Degtyarenko, P V; Denizli, H; Dennis, L; Dharmawardane, K V; Djalali, C; Dodge, G E; Donnelly, J; Doughty, D; Dugger, M; Dytman, S; Dzyubak, O P; Egiyan, H; Egiyan, K S; Elouadrhiri, L; Eugenio, P; Fatemi, R; Fedotov, G; Fersch, R G; Feuerbach, R J; Funsten, H; Garçon, M; Gavalian, G; Gilfoyle, G P; Giovanetti, K L; Girod, F X; Goetz, J T; Gonenc, A; Gordon, C I O; Gothe, R W; Grioen, K A; Guidal, M; Guillo, M; Guler, N; Guo, L; Gyurjyan, V; Hadjidakis, C; Hakobyan, R S; Hardie, J; Hersman, F W; Hicks, K; Hleiqawi, I; Holtrop, M; Hyde-Wright, C E; Ilieva, Y; Ireland, D G; Ishkhanov, B S; Ito, M M; Jenkins, D; Jo, H S; Joo, K; Jüngst, H G; Kellie, J D; Khandaker, M; Kim, W; Klein, A; Klein, F J; Kossov, M; Kramer, L H; Kubarovski, V; Kuhn, S E; Kuleshov, S V; Kühn, J; Lachniet, J; Laget, J M; Langheinrich, J; Lawrence, D; Li, J; Livingston, K; McAleer, S; McKinnon, B; McNabb, J W C; Mecking, B A; Mehrabyan, S S; Melone, J J; Mestayer, M D; Meyer, C A; Mibe, T; Mikhailov, K; Minehart, R C; Mirazita, M; Miskimen, R; Mokeev, V; Morand, L; Morrow, S A; Mutchler, G S; Müller, J; Nadel-Turonski, P; Napolitano, J; Nasseripour, R; Niccolai, S; Niculescu, G; Niculescu, I; Niczyporuk, B B; Niyazov, R A; Nozar, M; O'Rielly, G V; Osipenko, M; Ostrovidov, A I; Park, K; Pasyuk, E; Paterson, C; Pierce, J; Pivnyuk, N; Pocanic, D; Pogorelko, O I; Pozdniakov, S; Preedom, B M; Price, J W; Prok, Y; Protopopescu, D; Raue, B A; Riccardi, G; Ricco, G; Ripani, M; Ritchie, B G; Ronchetti, F; Rosner, G; Rossi, P; Sabatie, F; Salgado, C; Santoro, J P; Sapunenko, V; Schumacher, R A; Serov, V S; Sharabyan, Yu G; Skabelin, A V; Smith, E S; Smith, L C; Sober, D I; Stavinsky, A V; Stepanyan, S; Stokes, B E; Stoler, P; Strauch, S; Taiuti, M; Tedeschi, D J; Thoma, U; Tkabladze, A; Tkachenko, S I; Todor, L; Tur, C; Ungaro, M; Vineyard, M F; Vlassov, A V; Weinstein, L B; Weygand, D P; Williams, M; Wolin, E; Wood, M H; Yegneswaran, A; Zana, L; Zhang, J; Zhao, B
2006-01-01
We report results from an experiment measuring the semi-inclusive reaction $d(e,e'p_s)$ where the proton $p_s$ is moving at a large angle relative to the momentum transfer. If we assume that the proton was a spectator to the reaction taking place on the neutron in deuterium, the initial state of that neutron can be inferred. This method, known as spectator tagging, can be used to study electron scattering from high-momentum (off-shell) neutrons in deuterium. The data were taken with a 5.765 GeV electron beam on a deuterium target in Jefferson Laboratory's Hall B, using the CLAS detector. A reduced cross section was extracted for different values of final-state missing mass $W^{*}$, backward proton momentum $\\vec{p}_{s}$ and momentum transfer $Q^{2}$. The data are compared to a simple PWIA spectator model. A strong enhancement in the data observed at transverse kinematics is not reproduced by the PWIA model. This enhancement can likely be associated with the contribution of final state interactions (FSI) that ...
The spectrometer of the High-Resolution Multi position Thomson Scattering Diagnostic for TJ-II
Energy Technology Data Exchange (ETDEWEB)
Herranz, J.; Barth, C.J.; Castejon, F.; Lopez-Sanchez, A.; Mirones, E.; Pastor, I.; Perez, D.; Rodriguez, C.
2001-07-01
Since 1998, a high-resolution multiposition thompson scattering system is in operation at the stellarator TJ-II, combining high accuracy and excellent spatial resolution. A description of the diagnostic spectrometer is presented. The main characteristics of the spectrometer that allow YJ-II Thomson scattering diagnostic to have high spatial and spectral resolution are described in this paper. (Author)
Effect of signal frequency on four-wave mixing through stimulated Brillouin scattering
Energy Technology Data Exchange (ETDEWEB)
Watkins, D.E. (Los Alamos National Laboratory, P. O. Box 1663, Los Alamos, NM (USA)); Scott, A.M.; Ridley, K.D. (Royal Signals and Radar Establishment, Great Malvern, Worcestershire (England))
1990-11-15
We present measurements of the dependence of the phase-conjugate reflectivity on signal frequency for Brillouin-enhanced four-wave mixing at pump intensities above the threshold instability. The measurements were made in TiCl{sub 4} at {lambda}=1 {mu}m and are consistent with a computer model of the reflectivity. We have observed that the frequency of the conjugate beam is independent of the frequency of the input signal beam in the unstable regime.
Thakkar, Disha; Gevriya, Bhavesh; Mashru, R. C.
2014-03-01
Linezolid reacted with palladium to form 1:1 binary cationic chelate which further reacted with eosin dye to form 1:1 ternary ion association complex at pH 4 of Walpole's acetate buffer in the presence of methyl cellulose. As a result not only absorption spectra were changed but Resonance Rayleigh Scattering (RRS), Second-order Scattering (SOS) and Frequency Doubling Scattering (FDS) intensities were greatly enhanced. The analytical wavelengths of RRS, SOS and FDS (λex/λem) of ternary complex were located at 538 nm/538 nm, 240 nm/480 nm and 660 nm/330 nm, respectively. The linearity range for RRS, SOS and FDS methods were 0.01-0.5 μg mL-1, 0.1-2 μg mL-1 and 0.2-1.8 μg mL-1, respectively. The sensitivity order of three methods was as RRS > SOS > FDS. Accuracy of all methods were determined by recovery studies and showed recovery between 98% and 102%. Intraday and inter day precision were checked for all methods and %RSD was found to be less than 2 for all methods. The effects of foreign substances were tested on RRS method and it showed the method had good selectivity. For optimization of process parameter, Taguchi orthogonal array design L8(24) was used and ANOVA was adopted to determine the statistically significant control factors that affect the scattering intensities of methods. The reaction mechanism, composition of ternary ion association complex and reasons for scattering intensity enhancement was discussed in this work.
Calibration of High Frequency MEMS Microphones
Shams, Qamar A.; Humphreys, William M.; Bartram, Scott M.; Zuckewar, Allan J.
2007-01-01
Understanding and controlling aircraft noise is one of the major research topics of the NASA Fundamental Aeronautics Program. One of the measurement technologies used to acquire noise data is the microphone directional array (DA). Traditional direction array hardware, consisting of commercially available condenser microphones and preamplifiers can be too expensive and their installation in hard-walled wind tunnel test sections too complicated. An emerging micro-machining technology coupled with the latest cutting edge technologies for smaller and faster systems have opened the way for development of MEMS microphones. The MEMS microphone devices are available in the market but suffer from certain important shortcomings. Based on early experiments with array prototypes, it has been found that both the bandwidth and the sound pressure level dynamic range of the microphones should be increased significantly to improve the performance and flexibility of the overall array. Thus, in collaboration with an outside MEMS design vendor, NASA Langley modified commercially available MEMS microphone as shown in Figure 1 to meet the new requirements. Coupled with the design of the enhanced MEMS microphones was the development of a new calibration method for simultaneously obtaining the sensitivity and phase response of the devices over their entire broadband frequency range. Over the years, several methods have been used for microphone calibration. Some of the common methods of microphone calibration are Coupler (Reciprocity, Substitution, and Simultaneous), Pistonphone, Electrostatic actuator, and Free-field calibration (Reciprocity, Substitution, and Simultaneous). Traditionally, electrostatic actuators (EA) have been used to characterize air-condenser microphones for wideband frequency ranges; however, MEMS microphones are not adaptable to the EA method due to their construction and very small diaphragm size. Hence a substitution-based, free-field method was developed to
Energy Technology Data Exchange (ETDEWEB)
Francoeur, Mathieu [Department of Mechanical Engineering, University of Kentucky, Lexington, KY 40506 (United States); Rousse, Daniel R [Department of Mathematics, Computer Sciences, and Engineering, Universite du Quebec a Rimouski, Levis, PQ G6V 8R9 (Canada)
2007-09-21
Optical tomography (OT) is a promising non-intrusive characterization technique of absorbing and scattering media that uses transmitted and/or reflected signals of samples irradiated with visible or near-infrared light. The quality of OT techniques is directly related to the accuracy of their forward models due to the use of inversion algorithms. In this paper, forward models for transient OT approaches are investigated. The system under study involves a one-dimensional absorbing and scattering medium illuminated by a short laser pulse; this problem is solved using a discrete ordinates-finite volume (DO-FV) method in both time and frequency domain. Previous works have shown that time-domain approaches coupled with first order spatial interpolation schemes cannot represent the physics of the problem adequately as transmitted fluxes emerge before the minimal physical time required to leave the medium. In this work, the Van Leer and Superbee flux limiters, combined with the second order Lax-Wendroff scheme, are used in an attempt to prevent this. Results show that despite significant improvement, flux limiters fail to completely eliminate the physically unrealistic behaviour. On the other hand, results for transmittance obtained from the frequency-based method are accurate, without physically unrealistic behaviours at early time periods. The frequency-dependent approach is however computationally expensive, since it requires approximately five times more computational time than its temporal counterpart when used as a forward model for transient OT. On the other hand, the great advantages of the frequency-based approach is that limited windows of temporal signals can be calculated efficiently (in transient OT), and it can also be used as a forward model for steady-state, frequency-based and transient OT techniques.
Extended high frequency audiometry in secretory otitis media.
Sharma, Deepika; Munjal, Sanjay K; Panda, Naresh K
2012-06-01
The objective of the present study was to determine the status of extended high frequencies in subjects with secretory otitis media. The study evaluated 30 ears of 20 subjects with secretory otitis media in the age group of 15-30 years. This data was compared with 20 ears of 10 volunteers of the same age group with clinically normal hearing. Pure tone air conduction thresholds were analyzed in three frequency groups: low frequency (LF: 0.25, 0.5, and 1 kHz), high frequency (HF: 2, 4, and 8 kHz) and extended high frequency (EHF: 10, 12, and 16 kHz). The results showed elevated extended high frequency thresholds (EHFG) as compared to control group and comparatively better thresholds at high frequencies(HFG)s as compared to low (LFG)and extended high frequencies(EHFG) in the study group. This validates the importance of including an extended high frequency audiometry in the test battery of patients with secretory otitis media.
Small-angle X-ray scattering at the ESRF high-brillance beamline
Energy Technology Data Exchange (ETDEWEB)
Boesecke, P.; Diat, O. [European Synchrotron Radiation Facility (ESRF), 38 -Grenoble (France)
1997-10-01
The high-brilliance beamline (BL4/ID2) at the European synchrotron radiation facility (ESRF) in Grenoble has been constructed with the emphasis on time-resolved small-angle X-ray scattering and macromolecular crystallography. It has been open to users for two years. The beamline has opened up new areas in small-angle scattering research, facilitating (a) small-angle crystallography on structures with unit cells of several hundredths of nanometres, (b) overlap with the light scattering range for the study of optical systems, (c) high photon flux for time-resolved experiments and (d) a high spatial coherence allowing submicrometre imaging with X-rays. The set-up and the detector system of the small-angle scattering station are presented. A method for obtaining absolute scattering intensities is described. The parasitic background at the station is discussed in terms of absolute scattering intensities. (orig.). 22 refs.
SINGLE PHASE HIGH FREQUENCY AC CONVERTER FOR INDUCTION HEATING APPLICATION
Directory of Open Access Journals (Sweden)
M.A INAYATHULLAAH,
2010-12-01
Full Text Available The proposed topology reduces the total harmonic distortion (THD of a high frequency AC/AC Converter well below the acceptable limit. This paper deals with a novel single phase AC/DC/AC soft switching utility frequency AC to high frequency AC converter. In this paper a single phase full bridge inverter with Vienna rectifier as front end is used instead of conventional diode bridge rectifier to provide continuous sinusoidal input current with nearly unity power factor at the source side with extremely low distortion.. This power converter is more suitable and acceptable for cost effective high frequency (HF consumer induction heating applications.
Donai, Jeremy J; Halbritter, Rachel M
The purpose of this study was to investigate the ability of normal-hearing listeners to use high-frequency energy for gender identification from naturally produced speech signals. Two experiments were conducted using a repeated-measures design. Experiment 1 investigated the effects of increasing high-pass filter cutoff (i.e., increasing the low-frequency spectral limit) on gender identification from naturally produced vowel segments. Experiment 2 studied the effects of increasing high-pass filter cutoff on gender identification from naturally produced sentences. Confidence ratings for the gender identification task were also obtained for both experiments. Listeners in experiment 1 were capable of extracting talker gender information at levels significantly above chance from vowel segments high-pass filtered up to 8.5 kHz. Listeners in experiment 2 also performed above chance on the gender identification task from sentences high-pass filtered up to 12 kHz. Cumulatively, the results of both experiments provide evidence that normal-hearing listeners can utilize information from the very high-frequency region (above 4 to 5 kHz) of the speech signal for talker gender identification. These findings are at variance with current assumptions regarding the perceptual information regarding talker gender within this frequency region. The current results also corroborate and extend previous studies of the use of high-frequency speech energy for perceptual tasks. These findings have potential implications for the study of information contained within the high-frequency region of the speech spectrum and the role this region may play in navigating the auditory scene, particularly when the low-frequency portion of the spectrum is masked by environmental noise sources or for listeners with substantial hearing loss in the low-frequency region and better hearing sensitivity in the high-frequency region (i.e., reverse slope hearing loss).
Wide Frequency Band Active Damping Strategy for DFIG System High Frequency Resonance
DEFF Research Database (Denmark)
Song, Yipeng; Blaabjerg, Frede
2016-01-01
As a popular renewable power generation solution, the Doubly Fed Induction Generator (DFIG) based wind power system may suffer from High Frequency Resonance (HFR) caused by the impedance interaction between the DFIG system and the parallel compensated weak network. A wide frequency band active...... damping strategy for DFIG system HFR, including a high-pass filter and a virtual resistance, is proposed in this paper. The advantages of this active damping strategy are, 1) no resonance frequency detection unit is required, thus the control complexity can be decreased; 2) no active damping parameters...... adjustment is needed within certain wide frequency band, thus the robustness of the proposed active damping strategy can be improved. The parameter design of the high-pass filter cutoff frequency and the virtual resistance are theoretically analyzed with the purpose of satisfactory active damping. A 7.5 k...
Sokoloff, Jason Phillip
This thesis is a study of the low-frequency ionic excitations in KNbO_ 3, BaTiO _ 3, and KTa_{1-{ rm x}}Nb_{rm x}{rm O}_ 3, all of which are ferroelectric crystals with the ABO_ 3 perovskite structure. The motivation for these experiments is the considerable body of data resulting from various investigations of these crystals, much of which are inconsistent with the displacive soft mode theory once thought to accurately describe them. These anomalous results, along with a general introduction to these crystals and a survey of the relevant literature, are discussed in chapter one. Chapter two contains the background theory necessary to understand light scattering experiments in ionic crystals, as well as some specific models used to describe the low frequency ionic behavior of these crystals. Chapter three is a description of the experimental methods and techniques which were used to make low resolution (1cm ^{-1}) and high resolution (~.05cm^{-1 }) light scattering measurements of the crystals' inelastic spectral response, and measurements of the thermal behavior of the intensity of the inelastically scattered light within 2cm^{-1} of the laser line. All measurements were made using a conventional Raman spectrometer with various modifications. The most important modification to the system is the inclusion of an iodine filter which effectively eliminates the enormous elastic response from the scattered signal and allows the above measurements to be made. Finally in the last three chapters the results are discussed. The main conclusion is that all low frequency spectral features (< 30cm^{-1}) can be interpreted as the result of ionic excitations involving low-frequency vibrational or relaxation modes of motion of the B ion within an eight-site potential at the center of the unit cell. A quantitative analysis shows that the relaxation modes involve interwell motion by means of a tunneling, rather than hopping, process. Additionally the results contain strong evidence
Influence of Smoking on Ultra-High-Frequency Auditory Sensitivity.
Prabhu, Prashanth; Varma, Gowtham; Dutta, Kristi Kaveri; Kumar, Prajwal; Goyal, Swati
2017-04-01
In this study, an attempt was made to determine the effect of smoking on ultra-high-frequency auditory sensitivity. The study also attempted to determine the relationship between the nature of smoking and ultra-high-frequency otoacoustic emissions (OAEs) and thresholds. The study sample included 25 smokers and 25 non-smokers. A detailed history regarding their smoking habits was collected. High-frequency audiometric thresholds and amplitudes of high-frequency distortion-product OAEs were analyzed for both ears from all participants. The results showed that the ultra-high-frequency thresholds were elevated and that there was reduction in the amplitudes of ultra-high-frequency OAEs in smokers. There was an increased risk of auditory damage with chronic smoking. The study results highlight the application of ultra-high-frequency OAEs and ultra-high-frequency audiometry for the early detection of auditory impairment. However, similar studies should be conducted on a larger population for better generalization of the results.
Special Information on High-Frequency Radar. Part 15
1971-06-01
NRL Memorandum Report 2265 f Special Information on High-Frequency Radar Part XV J. M. HEADRICK, W. C. HEADRICK, J. M. HUDNALL AND J. F. THOMASON...20390 3. REPORT TITLE SPECIAL INFORMATION ON HIGH-FREQUENCY RADAR, PART XV (U) 4. DESCRIPTIVE NOTES(Type of report and inclhsive dates) This is a final
Stefan, V. Alexander
2011-04-01
Stimulated Raman scattering in the electron cyclotron frequency range of the X-Mode and O-Mode driver with the ITER plasma leads to the ``tail heating'' via the generation of suprathermal electrons and energetic ions. The scattering off Trivelpiece-Gould (T-G) modes is studied for the gyrotron frequency of 170GHz; X-Mode and O-Mode power of 24 MW CW; on-axis B-field of 10T. The synergy between the two-plasmon decay and Raman scattering is analyzed in reference to the bulk plasma heating. Supported in part by Nikola TESLA Labs, La Jolla, CA
DEFF Research Database (Denmark)
Thomsen, Jon Juel
2006-01-01
Effects of strong high-frequency excitation at multiple frequencies (multi-HFE) are analyzed for a class of generally nonlinear systems. The effects are illustrated for a simple pendulum system with a vibrating support, and for a parametrically excited flexible beam. For the latter, theoretical...
Effective properties of mechanical systems under high-frequency excitation at multiple frequencies
DEFF Research Database (Denmark)
Thomsen, Jon Juel
2008-01-01
Effects of strong high-frequency excitation at multiple frequencies (multi-HFE) are analyzed for a class of generally nonlinear systems. The effects are illustrated for a simple pendulum system with a vibrating support, and for a parametrically excited flexible beam. For the latter, theoretical p...
Scatter reduction for high resolution image detectors with a region of interest attenuator
Jain, Amit; Bednarek, Daniel R.; Rudin, Stephen
2014-03-01
Compton scatter is the main interaction of x-rays with objects undergoing radiographic and fluoroscopic imaging procedures. Such scatter is responsible for reducing image signal to noise ratio which can negatively impact object detection especially for low contrast objects. To reduce scatter, possible methods are smaller fields-of-view, larger air gaps and the use of an anti-scatter grid. Smaller fields of view may not be acceptable and scanned-beam radiography is not practical for real-time imaging. Air gaps can increase geometric unsharpness and thus degrade image resolution. Deployment of an anti-scatter grid is not well suited for high resolution imagers due to the unavailability of high line density grids needed to prevent grid-line artifacts. However, region of interest (ROI) imaging can be used not only for dose reduction but also for scatter reduction in the ROI. The ROI region receives unattenuated x-rays while the peripheral region receives x-rays reduced in intensity by an ROI attenuator. The scatter within the ROI part of the image originates from both the unattenuated ROI and the attenuated peripheral region. The scatter contribution from the periphery is reduced in intensity because of the reduced primary x-rays in that region and the scatter fraction in the ROI is thus reduced. In this study, the scatter fraction for various kVp's, air-gaps and field sizes was measured for a uniform head equivalent phantom. The scatter fraction in the ROI was calculated using a derived scatter fraction formula, which was validated with experimental measurements. It is shown that use of a ROI attenuator can be an effective way to reduce both scatter and patient dose while maintaining the superior image quality of high resolution detectors.
Electron Scattering From High-Momentum Neutrons in Deuterium
Energy Technology Data Exchange (ETDEWEB)
A.V. Klimenko; S.E. Kuhn
2005-10-12
We report results from an experiment measuring the semi-inclusive reaction D(e,e'p{sub s}) where the proton p{sub s} is moving at a large angle relative to the momentum transfer. If we assume that the proton was a spectator to the reaction taking place on the neutron in deuterium, the initial state of that neutron can be inferred. This method, known as spectator tagging, can be used to study electron scattering from high-momentum (off-shell) neutrons in deuterium. The data were taken with a 5.765 GeV electron beam on a deuterium target in Jefferson Laboratory's Hall B, using the CLAS detector. A reduced cross section was extracted for different values of final-state missing mass W*, backward proton momentum {rvec p}{sub s} and momentum transfer Q{sup 2}. The data are compared to a simple PWIA spectator model. A strong enhancement in the data observed at transverse kinematics is not reproduced by the PWIA model. This enhancement can likely be associated with the contribution of final state interactions (FSI) that were not incorporated into the model. A ''bound neutron structure function'' F{sub 2n}{sup eff} was extracted as a function of W* and the scaling variable x* at extreme backward kinematics, where effects of FSI appear to be smaller. For p{sub s} > 400 MeV/c, where the neutron is far off-shell, the model overestimates the value of F{sub 2n}{sup eff} in the region of x* between 0.25 and 0.6. A modification of the bound neutron structure function is one of possible effects that can cause the observed deviation.
Low and high frequency fatigue tests of nodular cast irons
Directory of Open Access Journals (Sweden)
A. Vaško
2017-01-01
Full Text Available The paper deals with the comparison of fatigue properties of nodular cast iron at low and high frequency cyclic loading. The specimens from three melts of nodular cast iron with different microstructure and mechanical properties were used for experiments. Fatigue tests were carried out at low and high frequency sinusoidal cyclic push-pull loading (stress ratio R = –1 at ambient temperature (T = 20 ± 5 °C. Low frequency fatigue tests were carried out using the fatigue experimental machine Zwick/Roell Amsler 150HFP 5100 at frequency f ≈ 120 Hz; high frequency fatigue tests were carried out using the ultrasonic fatigue testing device KAUP-ZU at frequency f ≈ 20 kHz.
Strong Scattering of High Power Millimeter Waves in Tokamak Plasmas with Tearing Modes
DEFF Research Database (Denmark)
Westerhof, E.; Nielsen, Stefan Kragh; Oosterbeek, J.W.;
2009-01-01
In tokamak plasmas with a tearing mode, strong scattering of high power millimeter waves, as used for heating and noninductive current drive, is shown to occur. This new wave scattering phenomenon is shown to be related to the passage of the O point of a magnetic island through the high power...... heating beam. The density determines the detailed phasing of the scattered radiation relative to the O-point passage. The scattering power depends strongly nonlinearly on the heating beam power. ©2009 The American Physical Society...
Study of multiple scattering in high magnetic fields
Kaplan, Daniel M
2011-01-01
Muon cooling for a neutrino factory or muon collider can be achieved using low-Z absorbers in strong focusing fields. Proposed cooling lattices place absorbers in solenoidal fields ranging up to 30 to 40T. The cooling performance of these lattices is determined by the interplay of ionization energy loss and Moliere scattering, but Bethe's classic treatment of Moliere scattering ignores the helical motion of charged particles in solenoidal fields. When this motion is taken into account, the performance of these lattices can be better than predicted by simulations using the standard treatment.
Luk`yanchuk, Boris S; Paniagua-Dominguez, Ramon; Kuznetsov, Arseniy I
2014-01-01
High-refractive index dielectric nanoparticles may exhibit strong directional forward light scattering at visible and near-infrared wavelengths due to interference of simultaneously excited electric and magnetic dipole resonances. For a spherical high-index dielectric, the so-called first Kerker's condition can be realized, at which the backward scattering practically vanishes for some combination of refractive index and particle size. However, Kerker's condition for spherical particles is only possible at the tail of the scattering resonances, when the particle scatters light weakly. Here we demonstrate that significantly higher forward scattering can be realized if spheroidal particles are considered instead. For each value of refractive index exists an optimum shape of the particle, which produces minimum backscattering efficiency together with maximum forward scattering. This effect is achieved due to the overlapping of magnetic and electric dipole resonances of the spheroidal particle at the resonance fr...
Quantum Frequency Conversion by Four-wave Mixing Using Bragg Scattering
DEFF Research Database (Denmark)
Andersen, Lasse Mejling; Rottwitt, Karsten; McKinstrie, C. J.
2012-01-01
Two theoretical models for frequency conversion (FC) using nondegenerate four-wave mixing are compared, and their range of validity are discussed. Quantum-statepreserving FC allows for arbitrary reshaping of states for an appropriate pump selection.......Two theoretical models for frequency conversion (FC) using nondegenerate four-wave mixing are compared, and their range of validity are discussed. Quantum-statepreserving FC allows for arbitrary reshaping of states for an appropriate pump selection....
Condenser Microphone Protective Grid Correction for High Frequency Measurements
Lee, Erik; Bennett, Reginald
2010-01-01
Use of a protective grid on small diameter microphones can prolong the lifetime of the unit, but the high frequency effects can complicate data interpretation. Analytical methods have been developed to correct for the grid effect at high frequencies. Specifically, the analysis pertains to quantifying the microphone protective grid response characteristics in the acoustic near field of a rocket plume noise source. A frequency response function computation using two microphones will be explained. Experimental and instrumentation setup details will be provided. The resulting frequency response function for a B&K 4944 condenser microphone protective grid will be presented, along with associated uncertainties
A MEMS-based high frequency x-ray chopper.
Siria, A; Dhez, O; Schwartz, W; Torricelli, G; Comin, F; Chevrier, J
2009-04-29
Time-resolved x-ray experiments require intensity modulation at high frequencies (advanced rotating choppers have nowadays reached the kHz range). We here demonstrate that a silicon microlever oscillating at 13 kHz with nanometric amplitude can be used as a high frequency x-ray chopper. We claim that using micro-and nanoelectromechanical systems (MEMS and NEMS), it will be possible to achieve higher frequencies in excess of hundreds of megahertz. Working at such a frequency can open a wealth of possibilities in chemistry, biology and physics time-resolved experiments.
Extended High Frequency Audiometry in Secretory Otitis Media
Sharma, Deepika; Munjal, Sanjay K.; Panda, Naresh K.
2012-01-01
The objective of the present study was to determine the status of extended high frequencies in subjects with secretory otitis media. The study evaluated 30 ears of 20 subjects with secretory otitis media in the age group of 15–30 years. This data was compared with 20 ears of 10 volunteers of the same age group with clinically normal hearing. Pure tone air conduction thresholds were analyzed in three frequency groups: low frequency (LF: 0.25, 0.5, and 1 kHz), high frequency (HF: 2, 4, and 8 kH...
A MEMS-based high frequency x-ray chopper
Energy Technology Data Exchange (ETDEWEB)
Siria, A; Schwartz, W; Chevrier, J [Institut Neel, CNRS-Universite Joseph Fourier Grenoble, BP 166, F-38042 Grenoble Cedex 9 (France); Dhez, O; Comin, F [ESRF, 6 rue Jules Horowitz, F-38043 Grenoble Cedex 9 (France); Torricelli, G [Department of Physics and Astronomy, University of Leicester, University Road, Leicester LE1 7RH (United Kingdom)
2009-04-29
Time-resolved x-ray experiments require intensity modulation at high frequencies (advanced rotating choppers have nowadays reached the kHz range). We here demonstrate that a silicon microlever oscillating at 13 kHz with nanometric amplitude can be used as a high frequency x-ray chopper. We claim that using micro-and nanoelectromechanical systems (MEMS and NEMS), it will be possible to achieve higher frequencies in excess of hundreds of megahertz. Working at such a frequency can open a wealth of possibilities in chemistry, biology and physics time-resolved experiments.
Stepped Frequency GPR for Utility Line Detection using Polarization Dependent Scattering
DEFF Research Database (Denmark)
Jensen, Ole Kiel; Gregersen, Ole
2000-01-01
A GPR for detection of buried cables and pipes is developed by Ekko Dome Production in cooperation with Aalborg University. The appearance is a "lawn mower" model including antennas, electronics and on-line data processing. A successful result is obtained by combining dedicated hardware and signal...... processing. The inherent signal to clutter ratio is bad, but making measurements at many polarization angles and subsequent signal processing improves the ratio. A simple model of the polarization dependence of the scattering from the target is used. The method is improved by combining the polarization...
InSAR Forensics: Tracing InSAR Scatterers in High Resolution Optical Image
Wang, Yuanyuan; Zhu, XiaoXiang
2015-05-01
This paper presents a step towards a better interpretation of the scattering mechanism of different objects and their deformation histories in SAR interferometry (InSAR). The proposed technique traces individual SAR scatterer in high resolution optical images where their geometries, materials, and other properties can be better analyzed and classified. And hence scatterers of a same object can be analyzed in group, which brings us to a new level of InSAR deformation monitoring.
DEFF Research Database (Denmark)
Wendelboe, Gorm; Jacobsen, Finn; Bell, Judith
2007-01-01
This work concerns modeling of very high frequency (>100 kHz) sonar images obtained from a sandy seabed. The seabed is divided into a discrete number of 1D height profiles. For each height profile the backscattered pressure is computed by an integral equation method for interface scattering between...
Different frequencies should be prescribed for different high frequency chest compression machines.
Milla, Carlos E; Hansen, Leland G; Warwick, Warren J
2006-01-01
High frequency chest compression (HFCC) is used for treatment and prevention of the lung diseases characterized by impaired mucus clearance and/or cough, where patients are at risk for acquiring acute bronchitis or pneumonia. The HFCC treatment frequencies may be prescribed according to the manufacturers' generic guidelines or may be determined for each individual patient by a "tuning" method that measures, at the mouth, the air volume displacement and the associated airflows produced at each frequency. Tuning is performed while the patient is breathing normally during the HFCC system operation. After measurements for several breaths at one frequency have been collected, the program randomly selects and measures another frequency until the entire frequency range of the machine being tuned has been sampled. Frequencies range from 6 to 21 Hz for the sine waveform machines and from 6 to 25 Hz for the square waveform machines. Each group of flow signals is digitized and analyzed by the program. For each frequency, the HFCC flow velocities and volumes are computed and averaged. These average flows and volumes are rank ordered; the three frequencies with the highest flows and the three frequencies producing the largest volumes are selected for prescription. If the same frequency is selected as one of the three best frequencies for both flow and volume, the next ranked frequency is selected randomly for flow or volume. Significant differences exist between patients and HFCC machines. In a series of 100 cystic fibrosis (CF) patients with varying degrees of lung disease, we found that the best-ranked frequencies varied from patient to patient and did not correlate with patients' age, gender, height, weight, or spirometry parameters. With the sine waveform, the highest HFCC airflows were between 13 and 20 Hz 82% of the time and the largest HFCC volumes were between 6 and 10 Hz 83% of the time. With the square waveform, both the highest average HFCC flow rates and the largest
Quantum inductance and high frequency oscillators in graphene nanoribbons.
Begliarbekov, Milan; Strauf, Stefan; Search, Christopher P
2011-04-22
Here we investigate high frequency AC transport through narrow graphene nanoribbons with top-gate potentials that form a localized quantum dot. We show that as a consequence of the finite dwell time of an electron inside the quantum dot (QD), the QD behaves like a classical inductor at sufficiently high frequencies ω ≥ GHz. When the geometric capacitance of the top-gate and the quantum capacitance of the nanoribbon are accounted for, the admittance of the device behaves like a classical serial RLC circuit with resonant frequencies ω ∼ 100-900 GHz and Q-factors greater than 10(6). These results indicate that graphene nanoribbons can serve as all-electronic ultra-high frequency oscillators and filters, thereby extending the reach of high frequency electronics into new domains.
Neutron-proton elastic scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Saleem, M.; Fazal-e-Aleem (Punjab Univ., Lahore (Pakistan). Dept. of Physics)
1980-09-06
The most recent measurements of the differential and total cross sections of neutron-proton elastic scattering from 70 to 400 GeV/c have been explained by using rho as a simple pole and pomeron as a dipole. The predictions are also made regarding the energy dependence of dip and bump structure in angular distribution.
Center for High-Frequency Microelectronics
1992-08-31
H. S. Fogler , H. Etemad and M. Elta, "Enhanced Etching of Group Ill-V Semiconductors by Oscillating with Sputter Etching and Reactive Ion Etching...to SI/SiGe Modulation Doped FET," submitted for publication to IEEE Electron Dev. Lett. 17. A. Demos, H. S. Fogler , and M. Elta, "X-Ray Photoelectron... Fogler , J. Fournier and M. Elta, "High Temperature Kinetic Study of InP RIE Etched with BC1 3, Argon and Oxygen," submitted for publication to Journal of
Polarization Properties of AGN at High Frequencies
Jorstad, S. G.
2009-08-01
I discuss variability of polarization in the core region of parsec scale radio jets and connections between 7 mm polarization in the VLBI core and polarization at shorter wavelengths from the whole source for a sample of AGN with highly relativistic jets known as blazars. The sources show pronounced diversity in polarization behavior that is not clearly understood. I discuss possible reasons for these differences as well as the role that VSOP-2 can play in exploring the magnetic field in the most compact regions of jets.
Solar coronal observations at high frequencies
Katsiyannis, A. C.; Mathioudakis, M.; Phillips, K. J. H.; Williams, D. R.; F. P. Keenan
2001-01-01
The Solar Eclipse Coronal Imaging System (SECIS) is a simple and extremely fast, high-resolution imaging instrument designed for studies of the solar corona. Light from the corona (during, for example, a total solar eclipse) is reflected off a heliostat and passes via a Schmidt-Cassegrain telescope and beam splitter to two CCD cameras capable of imaging at 60 frames a second. The cameras are attached via SCSI connections to a purpose-built PC that acts as the data acquisition and storage syst...
Wide Frequency Band Active Damping Strategy for DFIG System High Frequency Resonance
DEFF Research Database (Denmark)
Song, Yipeng; Blaabjerg, Frede
2016-01-01
As a popular renewable power generation solution, the Doubly Fed Induction Generator (DFIG) based wind power system may suffer from High Frequency Resonance (HFR) caused by the impedance interaction between the DFIG system and the parallel compensated weak network. A wide frequency band active...... damping strategy for DFIG system HFR, including a high-pass filter and a virtual resistance, is proposed in this paper. The advantages of this active damping strategy are, 1) no resonance frequency detection unit is required, thus the control complexity can be decreased; 2) no active damping parameters...
Transient high-frequency ultrasonic water atomization
Barreras, F.; Amaveda, H.; Lozano, A.
2002-06-01
An experimental study was performed to improve the understanding of the characteristics of ultrasonic water atomization when excited with waves in the MHz range. In the present experiments, small volumes of water were atomized, observing the temporal evolution of the process. Typical diameters of the resulting droplets are of the order of a few microns. To visualize them, images were acquired with very high magnification. Appropriate lenses were used to enable high resolution at a distance from the flow. Droplet size distributions were also calculated with a Malvern diffractometer. Droplet exit velocity was measured using particle image velocimetry. It was noticeable that, as the remaining liquid mass deposited over the ultrasonic transducer decreased, the atomization characteristics changed, and a second peak of larger droplets appeared in the size distribution function. This phenomenon is related to the change in the curvature of the liquid surface. Although results are not conclusive, it appears that, under the conditions in this study, some observations about droplet formation are better described by cavitation phenomena rather than by the simplified surface wave theory usually invoked to explain these processes.
High-frequency capillary waves excited by oscillating microbubbles
Pommella, Angelo; Poulichet, Vincent; Garbin, Valeria
2013-01-01
This fluid dynamics video shows high-frequency capillary waves excited by the volumetric oscillations of microbubbles near a free surface. The frequency of the capillary waves is controlled by the oscillation frequency of the microbubbles, which are driven by an ultrasound field. Radial capillary waves produced by single bubbles and interference patterns generated by the superposition of capillary waves from multiple bubbles are shown.
High-frequency energy in singing and speech
Monson, Brian Bruce
While human speech and the human voice generate acoustical energy up to (and beyond) 20 kHz, the energy above approximately 5 kHz has been largely neglected. Evidence is accruing that this high-frequency energy contains perceptual information relevant to speech and voice, including percepts of quality, localization, and intelligibility. The present research was an initial step in the long-range goal of characterizing high-frequency energy in singing voice and speech, with particular regard for its perceptual role and its potential for modification during voice and speech production. In this study, a database of high-fidelity recordings of talkers was created and used for a broad acoustical analysis and general characterization of high-frequency energy, as well as specific characterization of phoneme category, voice and speech intensity level, and mode of production (speech versus singing) by high-frequency energy content. Directionality of radiation of high-frequency energy from the mouth was also examined. The recordings were used for perceptual experiments wherein listeners were asked to discriminate between speech and voice samples that differed only in high-frequency energy content. Listeners were also subjected to gender discrimination tasks, mode-of-production discrimination tasks, and transcription tasks with samples of speech and singing that contained only high-frequency content. The combination of these experiments has revealed that (1) human listeners are able to detect very subtle level changes in high-frequency energy, and (2) human listeners are able to extract significant perceptual information from high-frequency energy.
High-frequency multimodal atomic force microscopy
Directory of Open Access Journals (Sweden)
Adrian P. Nievergelt
2014-12-01
Full Text Available Multifrequency atomic force microscopy imaging has been recently demonstrated as a powerful technique for quickly obtaining information about the mechanical properties of a sample. Combining this development with recent gains in imaging speed through small cantilevers holds the promise of a convenient, high-speed method for obtaining nanoscale topography as well as mechanical properties. Nevertheless, instrument bandwidth limitations on cantilever excitation and readout have restricted the ability of multifrequency techniques to fully benefit from small cantilevers. We present an approach for cantilever excitation and deflection readout with a bandwidth of 20 MHz, enabling multifrequency techniques extended beyond 2 MHz for obtaining materials contrast in liquid and air, as well as soft imaging of delicate biological samples.
Generalized Chou-Yang Model and Meson-Proton Elastic Scattering at High Energies
Saleem, Mohammad; Aleem, Fazal-E.; Rashid, Haris
The various characteristics of meson-proton elastic scattering at high energies are explained by using the generalized Chou-Yang model which takes into consideration the anisotropic scattering of objects constituting pions(kaons) and protons. A new parametrization of the proton form factor consistent with the recent experimental data is proposed. It is then shown that all the data for meson-proton elastic scattering at 200 and 250 GeV/c are in agreement with theoretical computations. The physical picture of generalized Chou-Yang model which is based on multiple scattering theory is given in detail.
Generalized Chou-Yang model and meson-proton elastic scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Saleem, M.; Aleem, F.E.; Rashid, H.
1989-01-01
The various characteristics of meson-proton elastic scattering at high energies are explained by using the generalized Chou-Yang model which takes into consideration the anisotropic scattering of objects constituting pions(kaons) and protons. A new parametrization of the proton form factor consistent with the recent experimental data is proposed. It is then shown that all the data for meson-proton elastic scattering at 200 and 250 GeV/c are in agreement with theoretical computations. The physical picture of generalized Chou-Yang model which is based on multiple scattering theory is given in detail.
Extraction of ULSI Interconnect Resistance at High Frequencies
Institute of Scientific and Technical Information of China (English)
XIAO Xia; JIAN Duanduan; YAO Suying; ZHANG Shengcai; RUAN Gang
2005-01-01
Correct extraction of the ultra-large-scale integrated (ULSI) interconnect components at hight frequencies is very important for evaluating electrical performances of high-speed ULSI circuits.In this paper, the extraction of the interconnect resistance at high frequencies is derived from the Ohm′s law and verified by the software FastHenry.The results are also compared with those of another resistance formula originated from the effective area of the current flowing. The applicability of these two formulae is discussed.The influence of the interconnect geometry on the resistance at high frequencies is studied.The computation indicates that the effect of frequency on the resistance is weak when the skin depth is larger than half of the short side of the rectangular interconnect cross section.With further increase of frequency, the resistance increases obviously. Results imply that conductor with a square cross section exhibits the largest resistance for rectangular conductors of constant cross section area.
Wang, Jia; Hou, Xi; Wan, Yongjian; Shi, Chunyan; Zhong, Xianyun
2016-09-01
Extreme optical fabrication projects known as EUV and X-ray optic systems, which are representative of today's advanced optical manufacturing technology level, have special requirements for the optical surface quality. In synchroton radiation (SR) beamlines, mirrors of high shape accuracy is always used in grazing incidence. In nanolithograph systems, middle spatial frequency errors always lead to small-angle scattering or flare that reduces the contrast of the image. The slope error is defined for a given horizontal length, the increase or decrease in form error at the end point relative to the starting point is measured. The quality of reflective optical elements can be described by their deviation from ideal shape at different spatial frequencies. Usually one distinguishes between the figure error, the low spatial error part ranging from aperture length to 1mm frequencies, and the mid-high spatial error part from 1mm to 1 μm and from1 μm to some 10 nm spatial frequencies, respectively. Firstly, this paper will disscuss the relationship between slope error and middle spatial frequency error, which both describe the optical surface error along with the form profile. Then, experimental researches will be conducted on a high gradient precise aspheric with pitch tool, which aim to restraining the middle spatial frequency error.
The Influence of High-Frequency Envelope Information on Low-Frequency Vowel Identification in Noise.
Directory of Open Access Journals (Sweden)
Wiebke Schubotz
Full Text Available Vowel identification in noise using consonant-vowel-consonant (CVC logatomes was used to investigate a possible interplay of speech information from different frequency regions. It was hypothesized that the periodicity conveyed by the temporal envelope of a high frequency stimulus can enhance the use of the information carried by auditory channels in the low-frequency region that share the same periodicity. It was further hypothesized that this acts as a strobe-like mechanism and would increase the signal-to-noise ratio for the voiced parts of the CVCs. In a first experiment, different high-frequency cues were provided to test this hypothesis, whereas a second experiment examined more closely the role of amplitude modulations and intact phase information within the high-frequency region (4-8 kHz. CVCs were either natural or vocoded speech (both limited to a low-pass cutoff-frequency of 2.5 kHz and were presented in stationary 3-kHz low-pass filtered masking noise. The experimental results did not support the hypothesized use of periodicity information for aiding low-frequency perception.
Chow, P.; Xiao, Y. M.; Rod, E.; Bai, L. G.; Shen, G. Y.; Sinogeikin, S.; Gao, N.; Ding, Y.; Mao, H.-K.
2015-07-01
The double-differential scattering cross-section for the inelastic scattering of x-ray photons from electrons is typically orders of magnitude smaller than that of elastic scattering. With samples 10-100 μm size in a diamond anvil cell at high pressure, the inelastic x-ray scattering signals from samples are obscured by scattering from the cell gasket and diamonds. One major experimental challenge is to measure a clean inelastic signal from the sample in a diamond anvil cell. Among the many strategies for doing this, we have used a focusing polycapillary as a post-sample optic, which allows essentially only scattered photons within its input field of view to be refocused and transmitted to the backscattering energy analyzer of the spectrometer. We describe the modified inelastic x-ray spectrometer and its alignment. With a focused incident beam which matches the sample size and the field of view of polycapillary, at relatively large scattering angles, the polycapillary effectively reduces parasitic scattering from the diamond anvil cell gasket and diamonds. Raw data collected from the helium exciton measured by x-ray inelastic scattering at high pressure using the polycapillary method are compared with those using conventional post-sample slit collimation.
Padureanu, I; Rotarescu, C; Semenov, V A; Radulescu A
2000-01-01
Inelastic neutron scattering (INS) measurements of the vabrational frequencies in delta-Zr hydride containing uranium, ZrH_{1.6}U_{0.32}, have been performed in the range of high temperatures, between 293 and 973 K, at DIN-2PI time-of-flight spectrometer, IBR-2 pulsed reactor of JINR-Dubna. From the temperature dependence of the generalized vibrational density of states (GVDS), information about the H potential have been obtained and also high frequency limit of the lattice vibrations and frequency of optical vabrations have been studied as functions of temperature. Starting from the basic properties, the main thermodynamic functions, the characteristic Debye and Einstein temperatures and the total specific heat have been derived.
Theissen, J; Lunkenheimer, P P; Niederer, P; Bush, E; Frieling, G; Lawin, P
1987-09-01
The pattern of intrapulmonary pressure distribution was studied during high-frequency ventilation in order to explain the inconsistent results reported in the literature. Methods. Pressure and flow velocity (hot-wire anemometry) were measured in different lung compartments: 1. In transalveolar chambers sealed to the perforated pleural surfaces of dried pig lungs; 2. In emphysema-simulating airbags sealed to the isolated bronchial trees of dried pig lungs; and 3. In transalveolar chambers sealed to the perforated pleural surfaces of freshly excised pig lungs. Results. 1. The pressure amplitudes change from one area to another and depending on the exciting frequency. 2. High-frequency oscillation is associated with an increase in pressure amplitude when the exciting frequency rises, whereas with conventional high-frequency jet ventilation the pressure amplitude is more likely to decrease with frequency. 3. During high-frequency jet ventilation the local pressure amplitude changes with the position of the tube in the trachea rather than with the exciting frequency. 4. When the volume of the measuring chamber is doubled the resulting pressure amplitude falls to half the control value. 5. The pressure amplitude and mean pressure measured in the transalveolar chamber vary more or less independently from the peak flow velocity. High-frequency ventilation is thus seen to be a frequency-dependant, inhomogeneous mode of ventilation that can essentially be homogenized by systematically changing the exciting frequency. The frequency-dependant response to different lung areas to excitation is likely to result from an intrabronchially-localized aerodynamic effect rather than the mechanical properties of the lung parenchyma.
Buono, A.; Nunziata, F.; Migliaccio, M.; Li, X.; Wei, Y.; Shen, D.
2016-08-01
The Yellow River (in Chinese, Huang He) is the most sediment-filled river and the sixth-longest one in the world. The Yellow River is of paramount importance for safe navigation, local economy and environment due to the presence of floods, farms, aquacultures and pollution. Nonetheless, its delta area it is characterized by of several physical phenomena due to both natural and anthropogenic processes: sedimentation, erosion, floods, pollution, etc.In this study, actual partially overlapped L-/C-band FP SAR data collected from Radarsat-2 and ALOS PalSAR-2, respectively, are used to investigate the scattering properties of the Yellow River delta, whose very challenging area is characterized by different scenarios as recorded by ground truth data acquired during an in-situ campaign. 10 different classes have been codified: sea, river, forest, pond, swamp, tide-land, sand, saline soil, rural and industrial urban areas. However, no ground truth data is available in some codified areas.
High-frequency hearing in seals and sea lions.
Cunningham, Kane A; Reichmuth, Colleen
2016-01-01
Existing evidence suggests that some pinnipeds (seals, sea lions, and walruses) can detect underwater sound at frequencies well above the traditional high-frequency hearing limits for their species. This phenomenon, however, is not well studied: Sensitivity patterns at frequencies beyond traditional high-frequency limits are poorly resolved, and the nature of the auditory mechanism mediating hearing at these frequencies is unknown. In the first portion of this study, auditory sensitivity patterns in the 50-180 kHz range were measured for one California sea lion (Zalophus californianus), one harbor seal (Phoca vitulina), and one spotted seal (Phoca largha). Results show the presence of two distinct slope-regions at the high-frequency ends of the audiograms of all three subjects. The first region is characterized by a rapid decrease in sensitivity with increasing frequency-i.e. a steep slope-followed by a region of much less rapid sensitivity decrease-i.e. a shallower slope. In the second portion of this study, a masking experiment was conducted to investigate how the basilar membrane of a harbor seal subject responded to acoustic energy from a narrowband masking noise centered at 140 kHz. The measured masking pattern suggests that the initial, rapid decrease in sensitivity on the high-frequency end of the subject's audiogram is not due to cochlear constraints, as has been previously hypothesized, but rather to constraints on the conductive mechanism. Copyright © 2015 Elsevier B.V. All rights reserved.
Factors Affecting the Benefits of High-Frequency Amplification
Horwitz, Amy R.; Ahlstrom, Jayne B.; Dubno, Judy R.
2008-01-01
Purpose: This study was designed to determine the extent to which high-frequency amplification helped or hindered speech recognition as a function of hearing loss, gain-frequency response, and background noise. Method: Speech recognition was measured monaurally under headphones for nonsense syllables low-pass filtered in one-third-octave steps…
Free-field calibration of measurement microphones at high frequencies
DEFF Research Database (Denmark)
Barrera Figueroa, Salvador; Rasmussen, Knud; Torras Rosell, Antoni;
2011-01-01
Measurement microphones are typically calibrated in a free field at frequencies up to 50 kHz. This is a sufficiently high frequency for the most of sound measurement applications related with noise assessment. However, other applications such as assessment of the noise emitted by ultrasound clean...
Institute of Scientific and Technical Information of China (English)
Kazuhiro Kotoh; Munechika Enjoji; Eiichirou Arimura; Shusuke Morizono; Motoyuki Kohjima; Hironori Sakai; Makoto Nakamuta
2005-01-01
AIM: To evaluate a series of patients with hepatocellular carcinoma (HCC) treated with several different protocols and devices.METHODS: We treated 138 patients [chronic hepatitis/liver cirrhosis (Child-Pugh A/B/C), 3/135 (107/25/3)]with two different devices and protocols: cool-tip needle [initial ablation at 60 W (standard method) (n=37)or at 40 W (modified method) (n = 28)] or; ablation with a LeVeen needle using a standard single-step, full expansion (single-step) method (n = 39) or a multi-step,incremental expansion (multi-step) method.RESULTS: Eleven patients experienced rapid and scattered recurrences 1 to 7 mo after the ablation. Nine patients were treated by the cool-tip original protocol (60 W) (9/37=24%) and the other two by the LeVeen single-step method (2/39=5%). The location of the recurrence was surrounding and limited to the site of ablation segment in three cases, and spread over one lobule or both lobules in the other eight cases. There was no recurrence in the patients treated with the modified cool-tip modified method (40 W) or the LeVeen multi-step method.CONCLUSION: There is a risk of rapid and scattered recurrence after RFA, especially when the standard cooltip procedure is used. Because such recurrence would worsen the prognosis, we recommend that modified protocols for the cool-tip and LeVeen needle methods should be used in clinical practice.
High Performance Small Optically Pumped Caesium Beam Frequency Standard
Institute of Scientific and Technical Information of China (English)
ZHANG Jian-Wei; YANG Dong-Hai
2007-01-01
An experiment of a high performance small optically pumped caesium (Cs) beam frequency standard is reported. An extended cavity diode laser works as the probing laser, of which the frequency is stabilized by the Zeeman modulation method. The running parameters of the frequency standard are dynamically optimized via digital servo electronics. The experimental setup improves the frequency stability up to 1.8 × 10-12 atτ= 1 s and about 1.0 × 10～13 at τ= 105 s (Allan deviation).
HIGH-ORDER NYSTR(``O)M METHOD FOR THE EFIE OF EM SCATTERING PROBLEMS
Institute of Scientific and Technical Information of China (English)
Zhang Xiaojuan
2004-01-01
Nystrom method is a new method for solving electromagnetic scattering problems.This paper gives the detailed description on high-order Nystrom method used for the electric field integral equation of electromagnetic scattering problems. The numerical solutions of two examples are correct compared with Method Of Moment(MOM).
High energy x-ray reflectivity and scattering study from spectrum-x-gamma flight mirrors
DEFF Research Database (Denmark)
Christensen, Finn Erland; Budtz-Jørgensen, Carl; Frederiksen, P. Kk
1993-01-01
Line radiation from Fe K-alpha(1), Cu K-alpha(1), and Ag K-alpha(1) is used to study the high energy X-ray reflectivity and scattering behavior of flight-quality X-ray mirrors having various Al substrates. When both the specular and the scattered radiation are integrated, near theoretical...
High energy x-ray reflectivity and scattering study from spectrum-x-gamma flight mirrors
DEFF Research Database (Denmark)
Christensen, Finn Erland; Budtz-Jørgensen, Carl; Frederiksen, P. Kk
1993-01-01
Line radiation from Fe K-alpha(1), Cu K-alpha(1), and Ag K-alpha(1) is used to study the high energy X-ray reflectivity and scattering behavior of flight-quality X-ray mirrors having various Al substrates. When both the specular and the scattered radiation are integrated, near theoretical...
Structures in T-e profiles: High resolution Thomson scattering in the Rijnhuizen tokamak project
Beurskens, M. N. A.; Barth, C. J.; Cardozo, N. J. L.; van der Meiden, H. J.; R. T. P. Team,
1999-01-01
In the Rijnhuizen tokamak project, the double pulse multiposition Thomson scattering diagnostic is in full operation. Its high spatial resolution enables the measurement of small scale structures in T-e, n(e), and p(e). Thomson scattering profiles during an ordinary sawtooth crash show the displacem
Influence of Heat-radiating on Multi-photon Compton Scattering High-energy Electron
Institute of Scientific and Technical Information of China (English)
HAO Dong-shan; WANG Xin-min
2007-01-01
Using the model of the inverse Compton scattering between high-energy electrons and heat-radiation photons, the influence of heat-radiating photons on multi-photon Compton scattering high-energy electrons is studied . The results show that the energy loss, power loss, light resistance and light pressure of the high-energy electron formed by heat radiating are all proportional to the temperature T4 of the vacuum cavity of the electron,the Lorentz factor γ2 of the high-energy electrons, the scattering section of the electron and the number of photons acting at the same time with high-energy electrons. A good method for lessening the energy loss of the high-energy electron by using the one-photon Compton scattering between high-energy electrons and heat radiation photons is proposed.
On temporal correlations in high-resolution frequency counting
Dunker, Tim; Rønningen, Ole Petter
2016-01-01
We analyze noise properties of time series of frequency data from different counting modes of a Keysight 53230A frequency counter. We use a 10 MHz reference signal from a passive hydrogen maser connected via phase-stable Huber+Suhner Sucoflex 104 cables to the reference and input connectors of the counter. We find that the high resolution gap-free (CONT) frequency counting process imposes long-term correlations in the output data, resulting in a modified Allan deviation that is characteristic of random walk phase noise. Equally important, the CONT mode results in a frequency bias. In contrast, the counter's undocumented raw continuous mode (RCON) yields unbiased frequency stability estimates with white phase noise characteristics, and of a magnitude consistent with the counter's 20 ps single-shot resolution. Furthermore, we demonstrate that a 100-point running average filter in conjunction with the RCON mode yields resolution enhanced frequency estimates with flicker phase noise characteristics. For instance,...
Frequency noise in frequency swept fiber laser.
Pedersen, Anders Tegtmeier; Rottwitt, Karsten
2013-04-01
This Letter presents a measurement of the spectral content of frequency shifted pulses generated by a lightwave synthesized frequency sweeper. We found that each pulse is shifted in frequency with very high accuracy. We also discovered that noise originating from light leaking through the acousto- optical modulators and forward propagating Brillouin scattering appear in the spectrum.
122-W high-power single-frequency MOPA fiber laser in all-fiber format
Institute of Scientific and Technical Information of China (English)
Xiaolin Dong; Hu Xiao; Shanhui Xu; Zhiyong Pan; Yanxing Ma; Xiaolin Wang; Pu Zhou; Zhongmin Yang
2011-01-01
High-power single-frequency lasers have been found widespread applications in science and industries,such as gravitational wave detection,coherent and spectrum beam combining,range finding,and lidar[1- 7].In such cases,the localization of high-power single-frequency fiber laser is extremely important for domestic researchers.The power of single-frequency fiber lasers has increased dramatically in recent years.Most previously presented high-power single-frequency fiber lasers are based on bulk optics configuration,which have big sizes and massive weights.The use of aIl-fiber-based components can significantly simplify the system configuration and make the system more compact and robust[8-10].In this letter,we report a high-power single-frequency master oscillator power amplifier (MOPA) fiber laser in all-fiber format.The MOPA fiber laser consists of twostage amplification architecture.The maximum output power is 122 W,with slope efficiency of 72％.%We demonstrate a high-power single-frequency master oscillator power amplifier (MOPA) fiber laser. The central wavelength of the single-frequency fiber lager seed is 1 063.8 nm, with a linewidth narrower than 20 kHz and output power of 120 mW. By using two-stage amplification, a single-frequency fiber laser with an output power of 122 W is obtained, and the optical-optical conversion efficiency is 72%. No significant amplified spontaneous emission (ASE) or stimulated Brillouin scattering (SBS) is observed. The output power can be further increased by launching more pump power.
On the high frequency polarization of pulsar radio emission
Von Hoensbroech, A; Krawczyk, A
1998-01-01
We have analyzed the polarization properties of pulsars at an observing frequency of 4.9 GHz. Together with low frequency data, we are able to trace polarization profiles over more than three octaves into an interesting frequency regime. At those high frequencies the polarization properties often undergo important changes such as significant depolarization. A detailed analysis allowed us to identify parameters, which regulate those changes. A significant correlation was found between the integrated degree of polarization and the loss of rotational energy E^dot. The data were also used to review the widely established pulsar profile classification scheme of core- and cone-type beams. We have discovered the existence of pulsars which show a strongly increasing degree of circular polarization towards high frequencies. Previously unpublished average polarization profiles, recorded at the 100m Effelsberg radio telescope, are presented for 32 radio pulsars at 4.9 GHz. The data were used to derive polarimetric param...
High-Frequency Microwave Processing of Materials Laboratory
Federal Laboratory Consortium — FUNCTION: Conducts research on high-frequency microwave processing of materials using a highpower, continuous-wave (CW), 83-GHz, quasi-optical beam system for rapid,...
Conditions of the Classical Transmission Line Equations at High Frequency
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
New transmission line equations are deduced applying Maxwell's equations in this paper. The conditions of the classical transmission line equations have been discussed, which is important to solve the EM problems in high frequency case.
Oscillographic Chronopotentiometry with High and Low Frequency Current
Institute of Scientific and Technical Information of China (English)
无
2000-01-01
A novel electroanalytical method, oscillographic chronopotentiometry with high and low frequency current, is presented in this paper. With this method, the sensitivity of almost all kinds of oscillographic chronopotentiometry can be enhanced about one order.
High frequency modeling for quantum-well laser diodes
Institute of Scientific and Technical Information of China (English)
GAO JianJun
2009-01-01
High frequency modeling of quantum-well (OW) laser diodes for optoelectronic integrated circuit (OEIC) design is discussed in this paper. Modeling of the intrinsic device and the extrinsic components is discussed by accounting for important physical effects at both de and high frequency. The concepts of equivalent circuits representing both intrinsic and extrinsic components in a QW laser diode are ana-lyzed to obtain a physics-based high frequency model. The model is based on the physical rate equa-tions, and is versatile in that it permits both small-and large-signal simulations to be performed. Sev-eral procedures of the high frequency model parameter extraction are also discussed. Emphasis here is placed on validating the model via a comparison of simulated results with measured data of the small-signal modulation response, obtained over a wide range of optical output powers.
Very High Frequency Switch-Mode Power Supplies
DEFF Research Database (Denmark)
Madsen, Mickey Pierre
The importance of technology and electronics in our daily life is constantly increasing. At the same time portability and energy efficiency are currently some of the hottest topics. This creates a huge need for power converters in a compact form factor and with high efficiency, which can supply...... these electronic devices. This calls for new technologies in order to miniaturize the power electronics of today. One way to do this is by increasing the switching frequency dramatically and develop very high frequency switch mode power supplies. If these converters can be designed to operate efficiently, a huge...... of technologies for very high frequency switch mode power supplies. At these highly elevated frequencies normal bulky magnetics with heavy cores consisting of rare earth materials, can be replaced by air core inductors embedded in the printed circuit board. This is investigated thoroughly and both spirals...
Chemmangat Manakkal Cheriya, Krishnan; Ferranti, Francesco; Dhaene, Tom; Knockaert, Luc
2014-01-01
An enhanced parametric macromodelling scheme is presented for linear high-frequency systems based on the use of multiple frequency scaling coefficients and a sequential sampling algorithm to fully automate the entire modelling process. The proposed method is applied on a ring resonator bandpass filter example and compared with another state-of-the-art macromodelling method to show its improved modelling capability and reduced setup time.
High-frequency audibility: benefits for hearing-impaired listeners.
Hogan, C A; Turner, C W
1998-07-01
The present study was a systematic investigation of the benefit of providing hearing-impaired listeners with audible high-frequency speech information. Five normal-hearing and nine high-frequency hearing-impaired listeners identified nonsense syllables that were low-pass filtered at a number of cutoff frequencies. As a means of quantifying audibility for each condition, Articulation Index (AI) was calculated for each condition for each listener. Most hearing-impaired listeners demonstrated an improvement in speech recognition as additional audible high-frequency information was provided. In some cases for more severely impaired listeners, increasing the audibility of high-frequency speech information resulted in no further improvement in speech recognition, or even decreases in speech recognition. A new measure of how well hearing-impaired listeners used information within specific frequency bands called "efficiency" was devised. This measure compared the benefit of providing a given increase in speech audibility to a hearing-impaired listener to the benefit observed in normal-hearing listeners for the same increase in speech audibility. Efficiencies were calculated using the old AI method and the new AI method (which takes into account the effects of high speech presentation levels). There was a clear pattern in the results suggesting that as the degree of hearing loss at a given frequency increased beyond 55 dB HL, the efficacy of providing additional audibility to that frequency region was diminished, especially when this degree of hearing loss was present at frequencies of 4000 Hz and above. A comparison of analyses from the "old" and "new" AI procedures suggests that some, but not all, of the deficiencies of speech recognition in these listeners was due to high presentation levels.
High frequency ultrasound with color Doppler in dermatology*
Barcaui, Elisa de Oliveira; Carvalho, Antonio Carlos Pires; Lopes, Flavia Paiva Proença Lobo; Piñeiro-Maceira, Juan; Barcaui, Carlos Baptista
2016-01-01
Ultrasonography is a method of imaging that classically is used in dermatology to study changes in the hypoderma, as nodules and infectious and inflammatory processes. The introduction of high frequency and resolution equipments enabled the observation of superficial structures, allowing differentiation between skin layers and providing details for the analysis of the skin and its appendages. This paper aims to review the basic principles of high frequency ultrasound and its applications in different areas of dermatology. PMID:27438191
Basis of Ionospheric Modification by High-Frequency Waves
2007-06-01
for conducting ionospheric heating experiments in Gakona, Alaska, as part of the High Frequency Active Auroral Research Program ( HAARP ) [5], is being...upgraded. The upgraded HAARP HF transmitting system will be a phased-array antenna of 180 elements. Each element is a cross dipole, which radiates a...supported by the High Frequency Active Auroral Research Program ( HAARP ), the Air Force Research Laboratory at Hanscom Air Force Base, MA, and by the Office
Posture Estimation by Using High Frequency Markers and Kernel Regressions
Ono, Yuya; Iwai, Yoshio; Ishiguro, Hiroshi
Recently, research fields of augmented reality and robot navigation are actively investigated. Estimating a relative posture between an object and a camera is an important task in these fields. In this paper, we propose a novel method for posture estimation by using high frequency markers and kernel regressions. The markers are embedded in an object's texture in the high frequency domain. We observe the change of spatial frequency of object's texture to estimate a current posture of the object. We conduct experiments to show the effectiveness of our method.
Testing the efficiency of high-frequency foreign exchange market
Directory of Open Access Journals (Sweden)
Václav Mastný
2004-01-01
Full Text Available This paper deals with the efficiency of the high-frequency foreign exchange market. The objective of this paper is to investigate whether standard statistical tests give the same results for time series resampled at intervals of 15.30 and 60 min. The data used for the purpose of this paper contain major currency pairs such as EUR/USD, GBP/USD and JPY/USD. The results of statistical tests indicate that the high frequency intervals (15-minute are not random and should not be considered independent. On the other hand, tests with lower frequency rates (30 and 60 min indicate rising randomness of the market.
Gradual collapse of nuclear wave functions regulated by frequency tuned X-ray scattering.
Ignatova, Nina; Cruz, Vinícius V; Couto, Rafael C; Ertan, Emelie; Zimin, Andrey; Guimarães, Freddy F; Polyutov, Sergey; Ågren, Hans; Kimberg, Victor; Odelius, Michael; Gel'mukhanov, Faris
2017-03-07
As is well established, the symmetry breaking by isotope substitution in the water molecule results in localisation of the vibrations along one of the two bonds in the ground state. In this study we find that this localisation may be broken in excited electronic states. Contrary to the ground state, the stretching vibrations of HDO are delocalised in the bound core-excited state in spite of the mass difference between hydrogen and deuterium. The reason for this effect can be traced to the narrow "canyon-like" shape of the potential of the state along the symmetric stretching mode, which dominates over the localisation mass-difference effect. In contrast, the localisation of nuclear motion to one of the HDO bonds is preserved in the dissociative core-excited state . The dynamics of the delocalisation of nuclear motion in these core-excited states is studied using resonant inelastic X-ray scattering of the vibrationally excited HDO molecule. The results shed light on the process of a wave function collapse. After core-excitation into the state of HDO the initial wave packet collapses gradually, rather than instantaneously, to a single vibrational eigenstate.
Energy Technology Data Exchange (ETDEWEB)
Sowmya, K.; Nagendra, K. N.; Sampoorna, M. [Indian Institute of Astrophysics, Koramangala, Bengaluru (India); Stenflo, J. O., E-mail: ksowmya@iiap.res.in, E-mail: knn@iiap.res.in, E-mail: sampoorna@iiap.res.in, E-mail: stenflo@astro.phys.ethz.ch [Institute of Astronomy, ETH Zurich, CH-8093 Zurich (Switzerland)
2014-05-10
F-state interference significantly modifies the polarization produced by scattering processes in the solar atmosphere. Its signature in the emergent Stokes spectrum in the absence of magnetic fields is depolarization in the line core. In the present paper, we derive the partial frequency redistribution (PRD) matrix that includes interference between the upper hyperfine structure states of a two-level atom in the presence of magnetic fields of arbitrary strengths. The theory is applied to the Na I D{sub 2} line that is produced by the transition between the lower J = 1/2 and upper J = 3/2 states which split into F states because of the coupling with the nuclear spin I{sub s} = 3/2. The properties of the PRD matrix for the single-scattering case is explored, in particular, the effects of the magnetic field in the Paschen-Back regime and their usefulness as a tool for the diagnostics of solar magnetic fields.
Microscale capillary wave turbulence excited by high frequency vibration.
Blamey, Jeremy; Yeo, Leslie Y; Friend, James R
2013-03-19
Low frequency (O(10 Hz-10 kHz)) vibration excitation of capillary waves has been extensively studied for nearly two centuries. Such waves appear at the excitation frequency or at rational multiples of the excitation frequency through nonlinear coupling as a result of the finite displacement of the wave, most often at one-half the excitation frequency in so-called Faraday waves and twice this frequency in superharmonic waves. Less understood, however, are the dynamics of capillary waves driven by high-frequency vibration (>O(100 kHz)) and small interface length scales, an arrangement ideal for a broad variety of applications, from nebulizers for pulmonary drug delivery to complex nanoparticle synthesis. In the few studies conducted to date, a marked departure from the predictions of classical Faraday wave theory has been shown, with the appearance of broadband capillary wave generation from 100 Hz to the excitation frequency and beyond, without a clear explanation. We show that weak wave turbulence is the dominant mechanism in the behavior of the system, as evident from wave height frequency spectra that closely follow the Rayleigh-Jeans spectral response η ≈ ω(-17/12) as a consequence of a period-halving, weakly turbulent cascade that appears within a 1 mm water drop whether driven by thickness-mode or surface acoustic Rayleigh wave excitation. However, such a cascade is one-way, from low to high frequencies. The mechanism of exciting the cascade with high-frequency acoustic waves is an acoustic streaming-driven turbulent jet in the fluid bulk, driving the fundamental capillary wave resonance through the well-known coupling between bulk flow and surface waves. Unlike capillary waves, turbulent acoustic streaming can exhibit subharmonic cascades from high to low frequencies; here it appears from the excitation frequency all the way to the fundamental modes of the capillary wave at some four orders of magnitude in frequency less than the excitation frequency
On a Possible Stationary Point in High-Energy Scattering
Petrov, V A
2016-01-01
We discuss a curious observation: at energies from the ISR and up to the LHC, inclusively, the differential cross-section of elastic proton-proton scattering remains almost energy-independent at the transferred momentum t =-0.21 GeV^2 at the level of 7,5 mb/GeV^2.The latter value can be considered as a prediction for dsigma/dt at 13 TeV. We also obtain a lower bound for the forward pp slope at 13 GeV.
High energy light scattering in the generalized eikonal approximation.
Chen, T W
1989-10-01
The generalized eikonal approximation method is applied to the study of light scattering by a dielectric medium. In this method, the propagation of light inside the medium is assumed to be rectilinear, as in the usual eikonal method, but with a parameterized propagator which is used to include the edge effect and ray optics behavior at the limit of very short wavelengths. The resulting formulas for the intensity and extinction efficiency factor are compared numerically and shown to agree excellently with the exact results for a homogeneous dielectric sphere.
Polarization Transfer in Proton Compton Scattering at High Momentum Transfer
Hamilton, D J; Aniol, K A; Annand, J R M; Bertin, P Y; Bimbot, L; Bosted, P; Calarco, J R; Camsonne, A; Chang, G C; Chang, T H; Chen, J P; Seonho Choi; Chudakov, E; Danagulyan, A S; Degtyarenko, P; De Jager, C W; Deur, A; Dutta, D; Egiyan, K; Gao, H; Garibaldi, F; Gayou, O; Gilman, R; Glamazdin, A; Glashausser, C; Gómez, J; Hansen, J O; Hayes, D; Higinbotham, D W; Hinton, W; Horn, T; Howell, C; Hunyady, T; Hyde-Wright, C E; Jiang, X; Jones, M K; Khandaker, M; Ketikyan, A; Koubarovski, V; Krämer, K; Kumbartzki, G; Laveissière, G; Le Rose, J J; Lindgren, R A; Margaziotis, D J; Markowitz, P; McCormick, K; Meziani, Z E; Michaels, R; Moussiegt, P; Nanda, S; Nathan, A M; Nikolenko, D M; Nelyubin, V V; Norum, B E; Paschke, K; Pentchev, L; Perdrisat, C F; Piasetzky, E; Pomatsalyuk, R I; Punjabi, V A; Rachek, Igor A; Radyushkin, A V; Reitz, B; Roché, R; Roedelbronn, M; Ron, G; Sabatie, F; Saha, A; Savvinov, N; Shahinyan, A; Shestakov, Yu V; Sirca, S; Slifer, K J; Solvignon, P; Stoler, P; Tajima, S; Sulkosky, V; Todor, L; Vlahovic, B; Weinstein, L B; Wang, K; Wojtsekhowski, B; Voskanyan, H; Xiang, H; Zheng, X; Zhu, L
2004-01-01
Compton scattering from the proton was investigated at s=6.9 (GeV/c)**2 and \\t=-4.0 (GeV/c)**2 via polarization transfer from circularly polarized incident photons. The longitudinal and transverse components of the recoil proton polarization were measured. The results are in excellent agreement with a prediction based on a reaction mechanism in which the photon interacts with a single quark carrying the spin of the proton and in disagreement with a prediction of pQCD based on a two-gluon exchange mechanism.
Parametric Study of High Frequency Pulse Detonation Tubes
Cutler, Anderw D.
2008-01-01
This paper describes development of high frequency pulse detonation tubes similar to a small pulse detonation engine (PDE). A high-speed valve injects a charge of a mixture of fuel and air at rates of up to 1000 Hz into a constant area tube closed at one end. The reactants detonate in the tube and the products exit as a pulsed jet. High frequency pressure transducers are used to monitor the pressure fluctuations in the device and thrust is measured with a balance. The effects of injection frequency, fuel and air flow rates, tube length, and injection location are considered. Both H2 and C2H4 fuels are considered. Optimum (maximum specific thrust) fuel-air compositions and resonant frequencies are identified. Results are compared to PDE calculations. Design rules are postulated and applications to aerodynamic flow control and propulsion are discussed.
Using high pressure to study thermal transport and phonon scattering mechanisms
Hohensee, Gregory Thomas
The aerospace industry studies nanocomposites for heat dissipation and moderation of thermal expansion, and the semiconductor industry faces a Joule heating barrier in devices with high power density. My primary experimental tools are the diamond anvil cell (DAC) coupled with time-domain thermoreflectance (TDTR). TDTR is a precise optical method well-suited to measuring thermal conductivities and conductances at the nanoscale and across interfaces. The DAC-TDTR method yields thermal property data as a function of pressure, rather than temperature. This relatively unexplored independent variable can separate the components of thermal conductance and serve as an independent test for phonon-defect scattering models. I studied the effect of non-equilibrium thermal transport at the aluminum-coated surface of an exotic cuprate material Ca9La5Cu 24O41, which boasts a tenfold enhanced thermal conductivity along one crystalline axis where two-leg copper-oxygen spin-ladder structures carry heat in the form of thermalized magnetic excitations. Highly anisotropic materials are of interest for controlled thermal management applications, and the spin-ladder magnetic heat carriers ("magnons") are not well understood. I found that below room temperature, the apparent thermal conductivity of Ca9La5Cu24O41 depends on the frequency of the applied surface heating in TDTR. This occurs because the thermal penetration depth in the TDTR experiment is comparable to the length-scale for the equilibration of the magnons that are the dominant channel for heat conduction and the phonons that dominate the heat capacity. I applied a two-temperature model to analyze the TDTR data and extracted an effective volumetric magnon-phonon coupling parameter g for Ca9La5Cu24O 41 at temperatures from 75 K to 300 K; g varies by approximately two orders of magnitude over this range of temperature and has the value g = 1015 W m-3 K-1 near the peak of the thermal conductivity at T ≈ 180 K. To examine
Directory of Open Access Journals (Sweden)
Ariko Fukushima
Full Text Available The hypersonic effect is a phenomenon in which sounds containing significant quantities of non-stationary high-frequency components (HFCs above the human audible range (max. 20 kHz activate the midbrain and diencephalon and evoke various physiological, psychological and behavioral responses. Yet important issues remain unverified, especially the relationship existing between the frequency of HFCs and the emergence of the hypersonic effect. In this study, to investigate the relationship between the hypersonic effect and HFC frequencies, we divided an HFC (above 16 kHz of recorded gamelan music into 12 band components and applied them to subjects along with an audible component (below 16 kHz to observe changes in the alpha2 frequency component (10-13 Hz of spontaneous EEGs measured from centro-parieto-occipital regions (Alpha-2 EEG, which we previously reported as an index of the hypersonic effect. Our results showed reciprocal directional changes in Alpha-2 EEGs depending on the frequency of the HFCs presented with audible low-frequency component (LFC. When an HFC above approximately 32 kHz was applied, Alpha-2 EEG increased significantly compared to when only audible sound was applied (positive hypersonic effect, while, when an HFC below approximately 32 kHz was applied, the Alpha-2 EEG decreased (negative hypersonic effect. These findings suggest that the emergence of the hypersonic effect depends on the frequencies of inaudible HFC.
Fukushima, Ariko; Yagi, Reiko; Kawai, Norie; Honda, Manabu; Nishina, Emi; Oohashi, Tsutomu
2014-01-01
The hypersonic effect is a phenomenon in which sounds containing significant quantities of non-stationary high-frequency components (HFCs) above the human audible range (max. 20 kHz) activate the midbrain and diencephalon and evoke various physiological, psychological and behavioral responses. Yet important issues remain unverified, especially the relationship existing between the frequency of HFCs and the emergence of the hypersonic effect. In this study, to investigate the relationship between the hypersonic effect and HFC frequencies, we divided an HFC (above 16 kHz) of recorded gamelan music into 12 band components and applied them to subjects along with an audible component (below 16 kHz) to observe changes in the alpha2 frequency component (10-13 Hz) of spontaneous EEGs measured from centro-parieto-occipital regions (Alpha-2 EEG), which we previously reported as an index of the hypersonic effect. Our results showed reciprocal directional changes in Alpha-2 EEGs depending on the frequency of the HFCs presented with audible low-frequency component (LFC). When an HFC above approximately 32 kHz was applied, Alpha-2 EEG increased significantly compared to when only audible sound was applied (positive hypersonic effect), while, when an HFC below approximately 32 kHz was applied, the Alpha-2 EEG decreased (negative hypersonic effect). These findings suggest that the emergence of the hypersonic effect depends on the frequencies of inaudible HFC.
Forecasting Value-at-Risk Using High-Frequency Information
Directory of Open Access Journals (Sweden)
Huiyu Huang
2013-06-01
Full Text Available in the prediction of quantiles of daily Standard&Poor’s 500 (S&P 500 returns we consider how to use high-frequency 5-minute data. We examine methods that incorporate the high frequency information either indirectly, through combining forecasts (using forecasts generated from returns sampled at different intraday interval, or directly, through combining high frequency information into one model. We consider subsample averaging, bootstrap averaging, forecast averaging methods for the indirect case, and factor models with principal component approach, for both direct and indirect cases. We show that in forecasting the daily S&P 500 index return quantile (Value-at-Risk or VaR is simply the negative of it, using high-frequency information is beneficial, often substantially and particularly so, in forecasting downside risk. Our empirical results show that the averaging methods (subsample averaging, bootstrap averaging, forecast averaging, which serve as different ways of forming the ensemble average from using high-frequency intraday information, provide an excellent forecasting performance compared to using just low-frequency daily information.
Pope, Jason E; Falowski, Steven; Deer, Tim R
2015-07-01
In recent years, software development has been key to the next generation of neuromodulation devices. In this review, we will describe the new strategies for electrical waveform delivery for spinal cord stimulation. A systematic literature review was performed using bibliographic databases, limited to the English language and human data, between 2010 and 2014. The literature search yielded three articles on burst stimulation and four articles on high-frequency stimulation. High-frequency and burst stimulation may offer advantages over tonic stimulation, as data suggest improved patient tolerance, comparable increase in function and possible success with a subset of patients refractory to tonic spinal cord stimulation. High-frequency and burst stimulation are new ways to deliver energy to the spinal cord that may offer advantages over tonic stimulation. These may offer new salvage strategies to mitigate spinal cord stimulation failure and improve cost-effectiveness by reducing explant rate.
MIMO High Frequency Surface Wave Radar Using Sparse Frequency FMCW Signals
Directory of Open Access Journals (Sweden)
Mengguan Pan
2017-01-01
Full Text Available The heavily congested radio frequency environment severely limits the signal bandwidth of the high frequency surface wave radar (HFSWR. Based on the concept of multiple-input multiple-output (MIMO radar, we propose a MIMO sparse frequency HFSWR system to synthesize an equivalent large bandwidth waveform in the congested HF band. The utilized spectrum of the proposed system is discontinuous and irregularly distributed between different transmitting sensors. We investigate the sparse frequency modulated continuous wave (FMCW signal and the corresponding deramping based receiver and signal processor specially. A general processing framework is presented for the proposed system. The crucial step is the range-azimuth processing and the sparsity of the carrier frequency causes the two-dimensional periodogram to fail when applied here. Therefore, we introduce the iterative adaptive approach (IAA in the range-azimuth imaging. Based on the initial 1D IAA algorithm, we propose a modified 2D IAA which particularly fits the deramping processing based range-azimuth model. The proposed processing framework for MIMO sparse frequency FMCW HFSWR with the modified 2D IAA applied is shown to have a high resolution and be able to provide an accurate and clear range-azimuth image which benefits the following detection process.
Scattering and localization properties of highly oscillatory potentials
Duchêne, Vincent; Weinstein, Michael I
2012-01-01
We investigate scattering, localization and dispersive time-decay properties for the one-dimensional Schr\\"odinger equation with a rapidly oscillating and spatially localized potential, $q_\\epsilon=q(x,x/\\epsilon)$, where $q(x,y)$ is periodic and mean zero with respect to $y$. Such potentials model a microstructured medium. Homogenization theory fails to capture the correct low-energy ($k$ small) behavior of scattering quantities, e.g. the transmission coefficient, $t^{q_\\epsilon}(k)$, as $\\epsilon$ tends to zero. We derive an effective potential well, $\\sigma^\\epsilon_{eff}(x)=-\\epsilon^2\\Lambda_{eff}(x)$, such that $t^{q_\\epsilon}(k)-t^{\\sigma^\\epsilon_{eff}}(k)$ is uniformly small on $\\mathbb{R}$ and small in any bounded subset of a suitable complex strip. Within such a bounded subset, the scaled transmission coefficient has a universal form, depending on a single parameter, which is computable from the effective potential. A consequence is that if $\\epsilon$, the scale of oscillation of the microstructure...
Praveena, K.; Chen, Hsiao-Wen; Liu, Hsiang-Lin; Sadhana, K.; Murthy, S. R.
2016-12-01
Nowadays electronic industries prerequisites magnetic materials, i.e., iron rich materials and their magnetic alloys. However, with the advent of high frequency applications, the standard techniques of reducing eddy current losses, using iron cores, were no longer efficient or cost effective. Current market trends of the switched mode power supplies industries required even low energy losses in power conversion with maintenance of adequate initial permeability. From the above point of view, in the present study we aimed at the production of Manganese-Zinc ferrites prepared via solution combustion method using mixture of fuels and achieved low loss, high saturation magnetization, high permeability, and high magnetic domain relaxation frequency. The as-synthesized Zn2+ substituted MnFe2O4 were characterized by X-ray diffractometer (XRD) and transmission electron microscopy (TEM). The fractions of Mn2+, Zn2+ and Fe2+ cations occupying tetrahedral sites along with Fe occupying octahedral sites within the unit cell of all ferrite samples were estimated by Raman scattering spectroscopy. The magnetic domain relaxation was investigated by inductance spectroscopy (IS) and the observed magnetic domain relaxation frequency (fr) was increased with the increase in grain size. The real and imaginary part of permeability (μ‧ and μ″) increased with frequency and showed a maximum above 100 MHz. This can be explained on the basis of spin rotation and domain wall motion. The saturation magnetization (Ms), remnant magnetization (Mr) and magneton number (μB) decreased gradually with increasing Zn2+ concentration. The decrease in the saturation magnetization was discussed with Yafet-Kittel (Y-K) model. The Zn2+ concentration increases the relative number of ferric ions on the A sites, reduces the A-B interactions. The frequency dependent total power losses decreased as the zinc concentration increased. At 1 MHz, the total power loss (Pt) changed from 358 mW/cm3 for x=0-165 mW/cm3
High-speed optical frequency-domain imaging
Yun, S. H.; Tearney, G. J.; Boer; Iftimia, N. V.; Bouma, B. E.
2003-01-01
We demonstrate high-speed, high-sensitivity, high-resolution optical imaging based on optical frequency-domain interferometry using a rapidly-tuned wavelength-swept laser. We derive and show experimentally that frequency-domain ranging provides a superior signal-to-noise ratio compared with conventional time-domain ranging as used in optical coherence tomography. A high sensitivity of −110 dB was obtained with a 6 mW source at an axial resolution of 13.5 µm and an A-line rate of 15.7 kHz, rep...
High density THz frequency comb produced by coherent synchrotron radiation
Tammaro, S; Roy, P; Lampin, J -F; Ducournau, G; Cuisset, A; Hindle, F; Mouret, G
2014-01-01
Frequency combs (FC) have radically changed the landscape of frequency metrology and high-resolution spectroscopy investigations extending tremendously the achievable resolution while increasing signal to noise ratio. Initially developed in the visible and near-IR spectral regions, the use of FC has been expanded to mid-IR, extreme ultra-violet and X-ray. Significant effort is presently dedicated to the generation of FC at THz frequencies. One solution based on converting a stabilized optical frequency comb using a photoconductive terahertz emitter, remains hampered by the low available THz power. Another approach is based on active mode locked THz quantum-cascade-lasers providing intense FC over a relatively limited spectral extension. Alternatively, here we show that dense powerful THz FC is generated over one decade of frequency by coherent synchrotron radiation (CSR). In this mode, the entire ring behaves in a similar fashion to a THz resonator wherein electron bunches emit powerful THz pulses quasi-synch...
High Frequency Stochastic Resonance in Periodically Driven Systems
Dykman, M I
1993-01-01
Abstract: High frequency stochastic resonance (SR) phenomena, associated with fluctuational transitions between coexisting periodic attractors, have been investigated experimentally in an electronic model of a single-well Duffing oscillator bistable in a nearly resonant field of frequency $\\omega_F$. It is shown that, with increasing noise intensity, the signal/noise ratio (SNR) for a signal due to a weak trial force of frequency $\\Omega decreases again at higher noise intensities: behaviour similar to that observed previously for conventional (low frequency) SR in systems with static bistable potentials. The stochastic enhancement of the SNR of an additional signal at the mirror-reflected frequency $\\vert Ømega - 2 ømega_F \\vert$ is also observed, in accordance with theoretical predictions. Relationships with phenomena in nonlinear optics are discussed.
High frequency acoustic microscopy with Fresnel zoom lens
Institute of Scientific and Technical Information of China (English)
2007-01-01
The acoustic field distributions and the convergent beams generated by the planar-structure Fresnel zone transducers on solid surface are investigated. Because only 0 and 180 degree phase transducers are used, an imaging system with the Fresnel zoom lens could work at very high frequency, which overcomes the frequency limit of the traditional phased array acoustic imaging system. Simulation results are given to illustrate the acoustic field distributions along the focal axis and the whole plane as well. Based on the principle of scanning of the focus with the change of frequency for the excited signal, an experimental imaging system is also built. Acoustic Fresnel zone transducers are fabricated at center frequency of 400 MHz. Measurements and detections of the known hole flaws at different depths of the fused quartz sample are presented to show that the imaging system with Fresnel zoom lens could move its focus by only changing the frequency of the excited signal.
Adequacy of Frequency Reserves for High Wind Power Generation
DEFF Research Database (Denmark)
Das, Kaushik; Litong-Palima, Marisciel; Maule, Petr
2016-01-01
In this article, a new methodology is developed to assess the adequacy of frequency reserves to handle power imbalances caused by wind power forecast errors. The goal of this methodology is to estimate the adequate volume and speed of activation of frequency reserves required to handle power...... imbalances caused due to high penetration of wind power. An algorithm is proposed and developed to estimate the power imbalances due to wind power forecast error following activation of different operating reserves. Frequency containment reserve requirements for mitigating these power imbalances...... are developed through this methodology. Furthermore, the probability of reducing this frequency containment reserve requirement is investigated through this methodology with activation of different volumes and speed of frequency restoration reserve. Wind power generation for 2020 and 2030 scenarios...
Senior, A.; Mahmoudian, A.; Pinedo, H.; La Hoz, C.; Rietveld, M. T.; Scales, W. A.; Kosch, M. J.
2014-08-01
The first high-frequency (HF, 8 MHz) observations of the modulation of polar mesospheric summer echoes (PMSE) by artificial radio heating of the ionosphere are presented and compared to observations at 224 MHz and model predictions. The experiments were performed at the European Incoherent Scatter facility in northern Norway. It is shown that model results are in qualitative and partial quantitative agreement with the observations, supporting the prediction that with certain ranges of ice particle radii and concentration, PMSE at HF radar wavelengths can be enhanced by heating due to the dominance of dust charging over plasma diffusion.
2010-12-27
... SONAR technologies that operate at frequencies of 50 kiloHertz (kHz) and greater from mobile platforms... proposes to use HF and UHF SONAR technology from mobile platforms nationwide. Mobile platforms include...-specific, non-mobile operating scenarios or newly developed technologies fall outside of the scope of...
Masserey, B.; Raemy, C.; Fromme, P.
2012-05-01
Aerospace structures contain multi-layer components subjected to cyclic loading conditions; fatigue cracks and disbonds can develop, often at fastener holes. High-frequency guided waves have the potential for non-destructive damage detection at critical and difficult to access locations from a stand-off distance. Using commercially available ultrasonic transducers, high frequency guided waves were generated that penetrate through the complete thickness of a model structure, consisting of two adhesively bonded aluminum plates. The wave propagation along the specimen was measured and quantified using a laser interferometer. The wave propagation and scattering at internal defects was simulated using Finite Element (FE) models and good agreement with the measurement results found. The detection sensitivity using standard pulse-echo measurements was verified and the influence of the stand-off distance predicted from the FE simulation results.
Inelastic X-ray scattering experiments at extreme conditions: high temperatures and high pressures
Directory of Open Access Journals (Sweden)
S.Hosokawa
2008-03-01
Full Text Available In this article, we review the present status of experimental techniques under extreme conditions of high temperature and high pressure used for inelastic X-ray scattering (IXS experiments of liquid metals, semiconductors, molten salts, molecular liquids, and supercritical water and methanol. For high temperature experiments, some types of single-crystal sapphire cells were designed depending on the temperature of interest and the sample thickness for the X-ray transmission. Single-crystal diamond X-ray windows attached to the externally heated high-pressure vessel were used for the IXS experiment of supercritical water and methanol. Some typical experimental results are also given, and the perspective of IXS technique under extreme conditions is discussed.
High Energy Proton-Proton Elastic Scattering in Reggeon-Pomeron Exchange Model
Institute of Scientific and Technical Information of China (English)
ZHOU Li-Juan; HU Zhao-Hui; MA Wei-Xing
2006-01-01
We initially propose a Reggeon-Pomeron exchange model to describe proton-proton elastic scattering at high energies in this short paper. A calculation for total cross section of proton-proton elastic scattering at high energies is performed without any free parameters. Our new finding from this work is that the Reggeon-Pomeron model gives a perfect fit to experimental data of the total cross section at the whole energy region where experimental data exist.
Design & Implementation of High Switching & Low Phase Noise Frequency Synthesizer
Directory of Open Access Journals (Sweden)
Ali M. N. Hassan
2006-01-01
Full Text Available This research describes the design & implementation of frequency synthesizer using single loop Phase lock loop with the following specifications: Frequency range (1.5 2.75 GHz,Step size (1 MHz, Switching time 36.4 µs, & phase noise @10 kHz = -92dBc & spurious -100 dBc The development in I.C. technology provide the simplicity in the design of frequency synthesizer because it implements the phase frequency detector(PFD , prescalar & reference divider in single chip. Therefore our system consists of a single chip contains (low phase noise PFD, charge pump, prescalar & reference divider, voltage controlled oscillator , loop filter & reference oscillator. The single chip is used to provide the following properties :Low power consumptionSmall size, light weight.Flexibility in selecting crystal oscillator frequencies to fit into the system frequency planning.High reliability.The application of this synthesizer in frequency hopping systems, satellite communications & radar because it has high switching speed ,low phase noise & low spurious level.
Slow high-frequency effects in mechanics: problems, solutions, potentials
DEFF Research Database (Denmark)
Thomsen, Jon Juel
Strong high-frequency excitation (HFE) may change the ‘slow’ (i.e. effective or average) properties of mechanical systems, e.g. their stiffness, natural frequencies, equilibriums, equilibrium stability, and bifurcation paths. This tutorial describes three general HFE effects: Stiffening – an appa......Strong high-frequency excitation (HFE) may change the ‘slow’ (i.e. effective or average) properties of mechanical systems, e.g. their stiffness, natural frequencies, equilibriums, equilibrium stability, and bifurcation paths. This tutorial describes three general HFE effects: Stiffening...... and compared: The Method of Direct Separation of Motions, the Method of Averaging, and the Method of Multiple Scales. The tutorial concludes by suggesting that more vibration experts, researchers and students should know about HFE effects, for the benefit not only of general vibration troubleshooting, but also...
Propagation of high frequency waves in the quiet solar atmosphere
Directory of Open Access Journals (Sweden)
Andić A.
2008-01-01
Full Text Available High-frequency waves (5 mHz to 20 mHz have previously been suggested as a source of energy accounting for partial heating of the quiet solar atmosphere. The dynamics of previously detected high-frequency waves is analyzed here. Image sequences were taken by using the German Vacuum Tower Telescope (VTT, Observatorio del Teide, Izana, Tenerife, with a Fabry-Perot spectrometer. The data were speckle reduced and analyzed with wavelets. Wavelet phase-difference analysis was performed to determine whether the waves propagate. We observed the propagation of waves in the frequency range 10 mHz to 13 mHz. We also observed propagation of low-frequency waves in the ranges where they are thought to be evanescent in the regions where magnetic structures are present.
Propagation of High Frequency Waves in the Quiet Solar Atmosphere
Directory of Open Access Journals (Sweden)
Andić, A.
2008-12-01
Full Text Available High-frequency waves (5 mHz to 20 mHz have previously been suggested as a source of energy accounting for partial heating of the quiet solar atmosphere. The dynamics of previously detected high-frequency waves is analysed here. Image sequences were taken by using the German Vacuum Tower Telescope (VTT, Observatorio del Teide, Izana, Tenerife, with a Fabry-Perot spectrometer. The data were speckle reduced and analysed with wavelets. Wavelet phase-difference analysis was performed to determine whether the waves propagate. We observed the propagation of waves in the frequency range 10 mHz to 13 mHz. We also observed propagation of low-frequency waves in the ranges where they are thought to be evanescent in the regions where magnetic structures are present.
Propagation of High Frequency Waves in the Quiet Solar Atmosphere
AndiÄ, Aleksandra
2008-01-01
High-frequency waves (5 mHz to 20mHz) have previously been suggested as a source of energy accounting partial heating of the quiet solar atmosphere. The dynamics of previously detected high-frequency waves is analysed here. Image sequences are taken using the German Vacuum Tower Telescope (VTT), Observatorio del Teide, Izana, Tenerife, with a Fabry-Perot spectrometer. The data were speckle reduced and analyzed with wavelets. Wavelet phase-difference analysis is performed to determine whether the waves propagate. We observe the propagation of waves in the frequency range 10mHz to 13mHz. We also observe propagation of low-frequency waves in the ranges where they are thought to be evanescent in regions where magnetic structures are present.
On the Ongoing Evolution of Very High Frequency Power Supplies
DEFF Research Database (Denmark)
Knott, Arnold; Andersen, Toke Meyer; Kamby, Peter
2013-01-01
in radio frequency transmission equipment helps to overcome those. However those circuits were not designed to meet the same requirements as power converters. This paper summarizes the contributions in recent years in application of very high frequency (VHF) technologies in power electronics, describes......The ongoing demand for smaller and lighter power supplies is driving the motivation to increase the switching frequencies of power converters. Drastic increases however come along with new challenges, namely the increase of switching losses in all components. The application of power circuits used...
High-Frequency-Induced Cathodic Breakdown during Plasma Electrolytic Oxidation
Nominé, A.; Nominé, A. V.; Braithwaite, N. St. J.; Belmonte, T.; Henrion, G.
2017-09-01
The present communication shows the possibility of observing microdischarges under cathodic polarization during plasma electrolytic oxidation at high frequency. Cathodic microdischarges can ignite beyond a threshold frequency found close to 2 kHz. The presence (respectively, absence) of an electrical double layer is put forward to explain how the applied voltage can be screened, which therefore prevents (respectively, promotes) the ignition of a discharge. Interestingly, in the conditions of the present study, the electrical double layer requires between 175 and 260 μ s to form. This situates the expected threshold frequency between 1.92 and 2.86 kHz, which is in good agreement with the value obtained experimentally.
High frequency fall-off of source spectra using Q-free spectra estimation
Institute of Scientific and Technical Information of China (English)
无
1999-01-01
A broadband seismogram may be represented by a convolution of source time function, the propagation operator and the scattering/attenuation operator. As the propagation operator is frequency-independent, and the scattering/attenuation effect may be described by a Q-factor depending on frequency via Q-1=Q-11+(Q2ω)-1, considering a combination of the displacement spectra, the source spectra may directly be estimated, in which the contribution of the Q-value may be eliminated automatically. Using this algorithm, the near-source broadband seismograms of five aftershocks of the 1988 Lancang-Gengma, Yunnan Province, China earthquake were processed. The results for the ML=3.0 and ML=3.5 aftershocks show that for the same earthquake, similar high-frequency fall-off may be obtained from different recording stations. The result for the MS=6.7 aftershock shows that consistent source parameters may be gotten from different seismic stations. The parameters estimated also agree with the results obtained by empirical Green's function approach. The high-frequency spectra of the aftershocks exhibit a typical f-γ fall-off. For the ML=3.0 aftershock,γ≈3 ; for the MS=6.7 and ML=4.0 aftershocks,γ≈2; and for the ML=3.5 and ML=3.0 aftershocks, γ≈2.5. The corner frequency of the MS=6.7 aftershock indicates that it has a small source dimension, implying that it may come from the rupture of a small but strong barrier.
Yamaguchi, Tsuyoshi
2016-11-01
The frequency-dependent shear viscosity of two representative viscous liquids, o-terphenyl and glycerin, was experimentally determined at several temperatures and compared with the intermediate scattering functions reported in the literature. A comparison based on mode-coupling theory succeeded in relating the frequency-dependent shear viscosity with the intermediate scattering function at the main peak of the static structure factor. It suggests that the slow relaxation mode of the shear viscosity of both liquids is governed by the density fluctuation at the main peak of the static structure factor, in spite of the differences in the details of their intermolecular interactions.
Sowmya, K.; Nagendra, K. N.; Sampoorna, M.; Stenflo, J. O.
2014-10-01
The quantum interference between the fine structure states of an atom modifies the shapes of the emergent Stokes profiles in the second solar spectrum. This phenomenon has been studied in great detail both in the presence and absence of magnetic fields. By assuming a flat-spectrum for the incident radiation, the signatures of this effect have been explored for arbitrary field strengths. Even though the theory which takes into account the frequency dependence of the incident radiation is well developed, it is restricted to the regime in which the magnetic splitting is much smaller than the fine structure splitting. In the present paper, we carry out a generalization of our scattering matrix formalism including the effects of partial frequency redistribution for arbitrary magnetic fields. We test the formalism using available benchmarks for special cases. In particular, we apply it to the Li I 6708 Å D1 and D2 line system, for which observable effects from the Paschen-Back regime are expected in the Sun's spectrum.
Energy Technology Data Exchange (ETDEWEB)
Sowmya, K.; Nagendra, K. N.; Sampoorna, M. [Indian Institute of Astrophysics, Koramangala, Bengaluru (India); Stenflo, J. O., E-mail: ksowmya@iiap.res.in, E-mail: knn@iiap.res.in, E-mail: sampoorna@iiap.res.in, E-mail: stenflo@astro.phys.ethz.ch [Institute of Astronomy, ETH Zurich, CH-8093 Zurich (Switzerland)
2014-10-01
The quantum interference between the fine structure states of an atom modifies the shapes of the emergent Stokes profiles in the second solar spectrum. This phenomenon has been studied in great detail both in the presence and absence of magnetic fields. By assuming a flat-spectrum for the incident radiation, the signatures of this effect have been explored for arbitrary field strengths. Even though the theory which takes into account the frequency dependence of the incident radiation is well developed, it is restricted to the regime in which the magnetic splitting is much smaller than the fine structure splitting. In the present paper, we carry out a generalization of our scattering matrix formalism including the effects of partial frequency redistribution for arbitrary magnetic fields. We test the formalism using available benchmarks for special cases. In particular, we apply it to the Li I 6708 Å D{sub 1} and D{sub 2} line system, for which observable effects from the Paschen-Back regime are expected in the Sun's spectrum.
Sowmya, K; Sampoorna, M; Stenflo, J O
2014-01-01
The quantum interference between the fine structure states of an atom modifies the shapes of the emergent Stokes profiles in the Second Solar Spectrum. This phenomenon has been studied in great detail both in the presence and absence of magnetic fields. By assuming a flat-spectrum for the incident radiation, the signatures of this effect have been explored for arbitrary field strengths. Even though the theory which takes into account the frequency dependence of the incident radiation is well developed, it is restricted to the regime in which the magnetic splitting is much smaller than the fine structure splitting. In the present paper, we carry out a generalization of our scattering matrix formalism including the effects of partial frequency redistribution (PRD) for arbitrary magnetic fields. We test the formalism using available benchmarks for special cases. In particular we apply it to the Li\\,{\\sc i} 6708\\,\\AA\\ D$_1$ and D$_2$ line system, for which observable effects from the Paschen-Back regime are expec...
Engineering Graphene Conductivity for Flexible and High-Frequency Applications.
Samuels, Alexander J; Carey, J David
2015-10-14
Advances in lightweight, flexible, and conformal electronic devices depend on materials that exhibit high electrical conductivity coupled with high mechanical strength. Defect-free graphene is one such material that satisfies both these requirements and which offers a range of attractive and tunable electrical, optoelectronic, and plasmonic characteristics for devices that operate at microwave, terahertz, infrared, or optical frequencies. Essential to the future success of such devices is therefore the ability to control the frequency-dependent conductivity of graphene. Looking to accelerate the development of high-frequency applications of graphene, here we demonstrate how readily accessible and processable organic and organometallic molecules can efficiently dope graphene to carrier densities in excess of 10(13) cm(-2) with conductivities at gigahertz frequencies in excess of 60 mS. In using the molecule 3,6-difluoro-2,5,7,7,8,8-hexacyanoquinodimethane (F2-HCNQ), a high charge transfer (CT) of 0.5 electrons per adsorbed molecule is calculated, resulting in p-type doping of graphene. n-Type doping is achieved using cobaltocene and the sulfur-containing molecule tetrathiafulvalene (TTF) with a CT of 0.41 and 0.24 electrons donated per adsorbed molecule, respectively. Efficient CT is associated with the interaction between the π electrons present in the molecule and in graphene. Calculation of the high-frequency conductivity shows dispersion-less behavior of the real component of the conductivity over a wide range of gigahertz frequencies. Potential high-frequency applications in graphene antennas and communications that can exploit these properties and the broader impacts of using molecular doping to modify functional materials that possess a low-energy Dirac cone are also discussed.
High-Performance Computational Electromagnetics in Frequency-Domain and Time-Domain
2015-03-04
aforementioned contributions, for a given 1In view of its applications to seismic wave propagation Dr. Amlani’s PhD thesis received two awards at Cal- tech, one...for wave scattering problems. PhD thesis, California Institute of Technol- ogy, 2014. Available at http://www.its.caltech.edu/~obruno/preprints...solutions for some of the most challenging scattering problems in science and engineering. Electromagnetic scattering . Frequency domain solvers. Integral
Extended High Frequency Audiometry in Polycystic Ovary Syndrome
Directory of Open Access Journals (Sweden)
Cuneyt Kucur
2013-01-01
and BMI of PCOS and control groups were comparable. Each subject was tested with low (250–2000 Hz, high (4000–8000 Hz, and extended high frequency audiometry (8000–20000. Hormonal and biochemical values including LH, LH/FSH, testosterone, fasting glucose, fasting insulin, HOMA-I, and CRP were calculated. Results. PCOS patients showed high levels of LH, LH/FSH, testosterone, fasting insulin, glucose, HOMA-I, and CRP levels. The hearing thresholds of the groups were similar at frequencies of 250, 500, 1000, 2000, and 4000 Hz; statistically significant difference was observed in 8000–14000 Hz in PCOS group compared to control group. Conclusion. PCOS patients have hearing impairment especially in extended high frequencies. Further studies are needed to help elucidate the mechanism behind hearing impairment in association with PCOS.
The Subharmonic Behavior and Thresholds of High Frequency Ultrasound Contrast Agents
Allen, John
2016-11-01
Ultrasound contrast agents are encapsulated micro-bubbles used for diagnostic and therapeutic biomedical ultrasound. The agents oscillate nonlinearly about their equilibrium radii upon sufficient acoustic forcing and produce unique acoustic signatures that allow them to be distinguished from scattering from the surrounding tissue. The subharmonic response occurs below the fundamental and is associated with an acoustic pressure threshold. Subharmonic imaging using ultrasound contrast agents has been established for clinical applications at standard diagnostic frequencies typically below 20 MHz. However, for emerging applications of high frequency applications (above 20 MHz) subharmonic imaging is an area of on-going research. The effects of attenuation from tissue are more significant and the characterization of agents is not as well understood. Due to specificity and control production, polymer agents are useful for high frequency applications. In this study, we highlight novel measurement techniques to measure and characterize the mechanical properties of the shell of polymer contrast agents. The definition of the subharmonic threshold is investigated with respect to mono-frequency and chirp forcing waveforms which have been used to achieve optimal subharmonic content in the backscattered signal. Time frequency analysis using the Empirical Mode Decomposition (EMD) and the Hilbert-Huang transform facilitates a more sensitive and robust methodology for characterization of subharmonic content with respect to non-stationary forcing. A new definition of the subharmonic threshold is proposed with respect to the energy content of the associated adaptive basis decomposition. Additional studies with respect to targeted agent behavior and cardiovascular disease are discussed. NIH, ONR.
High-Power Laser Pulse Recirculation for Inverse Compton Scattering-Produced Gamma-Rays
Energy Technology Data Exchange (ETDEWEB)
Jovanovic, I; Shverdin, M; Gibson, D; Brown, C
2007-04-17
Inverse Compton scattering of high-power laser pulses on relativistic electron bunches represents an attractive method for high-brightness, quasi-monoenergetic {gamma}-ray production. The efficiency of {gamma}-ray generation via inverse Compton scattering is severely constrained by the small Thomson scattering cross section. Furthermore, repetition rates of high-energy short-pulse lasers are poorly matched with those available from electron accelerators, resulting in low repetition rates for generated {gamma}-rays. Laser recirculation has been proposed as a method to address those limitations, but has been limited to only small pulse energies and peak powers. Here we propose and experimentally demonstrate an alternative method for laser pulse recirculation that is uniquely capable of recirculating short pulses with energies exceeding 1 J. Inverse Compton scattering of recirculated Joule-level laser pulses has a potential to produce unprecedented peak and average {gamma}-ray brightness in the next generation of sources.
Carbon nanotube transistor based high-frequency electronics
Schroter, Michael
At the nanoscale carbon nanotubes (CNTs) have higher carrier mobility and carrier velocity than most incumbent semiconductors. Thus CNT based field-effect transistors (FETs) are being considered as strong candidates for replacing existing MOSFETs in digital applications. In addition, the predicted high intrinsic transit frequency and the more recent finding of ways to achieve highly linear transfer characteristics have inspired investigations on analog high-frequency (HF) applications. High linearity is extremely valuable for an energy efficient usage of the frequency spectrum, particularly in mobile communications. Compared to digital applications, the much more relaxed constraints for CNT placement and lithography combined with already achieved operating frequencies of at least 10 GHz for fabricated devices make an early entry in the low GHz HF market more feasible than in large-scale digital circuits. Such a market entry would be extremely beneficial for funding the development of production CNTFET based process technology. This talk will provide an overview on the present status and feasibility of HF CNTFET technology will be given from an engineering point of view, including device modeling, experimental results, and existing roadblocks. Carbon nanotube transistor based high-frequency electronics.
Efficient estimation for ergodic diffusions sampled at high frequency
DEFF Research Database (Denmark)
Sørensen, Michael
A general theory of efficient estimation for ergodic diffusions sampled at high fre- quency is presented. High frequency sampling is now possible in many applications, in particular in finance. The theory is formulated in term of approximate martingale estimating functions and covers a large class...
Occupational exposure to anaesthetic gases and high-frequency audiometry.
Giorgianni, Concetto; Gangemi, Silvia; Tanzariello, Maria Giuseppina; Barresi, Gaetano; Miceli, Ludovica; D'Arrigo, Graziella; Spatari, Giovanna
2015-09-01
Occupational exposure to anaestethic gases has been suggested to induce auditory damages. The aim of this study is to investigate high-frequency audiometric responses in subjects exposed to anaesthetic gases, in order to highlight the possible effects on auditory system. The study was performed on a sample of 30 medical specialists of Messina University Anaesthesia and Intensive care. We have used tonal audiometry as well as high-frequency one. We have compared the responses with those obtained in a similar control group not exposed to anaesthetic gases. Results were compared statistically. Results show a strong correlation (p = 0.000) between left and right ear responses to all the audiometric tests. The exposed and the control group run though the standard audiometry analysis plays different audiometric responses up only to higher frequencies (2000 HZ p = 0.009 and 4000 Hz p = 0.04); in high-frequency audiometry, as all other frequencies, the attention is drew to the fact that the sample groups distinguish themselves in a significantly statistic way (10,000 Hz p = 0.025, 12,000 Hz p = 0.008, 14,000 Hz p = 0.026, 16,000 Hz p = 0.08). The highest values are the ones related to exposed subjects both in standard (2000 Hz p = 0.01, 4000 Hz p = 0.02) and in high-frequency audiometry (10,000 Hz p = 0.011, 12,000 Hz p = 0.004, 14,000 Hz p = 0.012, 16,000 Hz p = 0.004). Results, even if preliminary and referred to a low-range sample, show an involvement of the anatomic structure responsible for the perception of high-frequency audiometric responses in subjects exposed to anaesthetic gases. © The Author(s) 2012.
11. international conference on elastic and diffractive scattering: towards high energy frontiers
Energy Technology Data Exchange (ETDEWEB)
NONE
2005-07-01
This conference is held every 2 years. Every time these conferences on elastic and diffractive scattering adapt their content to the most recent experimental and theoretical results concerning not only quantum chromodynamics (QCD) but also other fields of particle physics where diffractive physics is present. This year, besides classical themes such as: -) forward scattering, -) total cross-sections, -) real parts, and -) pomeron and odderon, the participants have addressed many other subjects such as: -) LHC physics, -) non-perturbative approaches to high-energy scattering, -) the dipole model, -) small-x evolution, -) hard diffraction in QCD, -) nuclear shadowing, -) diffractive Higgs studies, -) spin effects, -) 4-quarks and 5-quarks, or -) B-physics.
Fuzzy and conventional control of high-frequency ventilation.
Noshiro, M; Matsunami, T; Takakuda, K; Ryumae, S; Kagawa, T; Shimizu, M; Fujino, T
1994-07-01
A high-frequency ventilator was developed, consisting of a single-phase induction motor, an unbalanced mass and a mechanical vibration system. Intermittent positive pressure respiration was combined with high-frequency ventilation to measure end-tidal pCO2. Hysteresis was observed between the rotational frequency of the high-frequency ventilator and end-tidal pCO2. A fuzzy proportional plus integral control system, designed on the basis of the static characteristics of the controlled system and a knowledge of respiratory physiology, successfully regulated end-tidal pCO2. The characteristics of gas exchange under high-frequency ventilation was approximated by a first-order linear model. A conventional PI control system, designed on the basis of the approximated model, regulated end-tidal pCO2 with a performance similar to that of the fuzzy PI control system. The design of the fuzzy control system required less knowledge about the controlled system than that of the conventional control system.
High frequency optical pulse generation by frequency doubling using polarization rotation
Liu, Yang
2016-05-01
In this work, we propose and experimentally characterize a stable 40 GHz optical pulse generation by frequency doubling using polarization rotation in a phase modulator (PM). Only half the electrical driving frequency is required (i.e. 20 GHz); hence the deployment cost can be reduced. Besides, precise control of the bias of the PM is not required. The generated optical pulses have a high center-mode-suppression-ratio (CMSR) of > 28 dB. The single sideband (SSB) noise spectrum is also measured, and the time-domain waveforms under different CMSRs are also analyzed and discussed.
Temporal mode sorting using dual-stage quantum frequency conversion by asymmetric Bragg scattering
DEFF Research Database (Denmark)
Christensen, Jesper Bjerge; Reddy, Dileep V.; McKinstrie, C. J.;
2015-01-01
The temporal shape of single photons provides a high-dimensional basis of temporal modes, and can therefore support quantum computing schemes that go beyond the qubit. However, the lack of linear optical components to act as quantum gates has made it challenging to efficiently address specific...
Planck 2013 results. VI. High Frequency Instrument data processing
DEFF Research Database (Denmark)
Ade, P. A. R.; Aghanim, N.; Armitage-Caplan, C.
2013-01-01
We describe the processing of the 531 billion raw data samples from the High Frequency Instrument (HFI), which we performed to produce six temperature maps from the first 473 days of Planck-HFI survey data. These maps provide an accurate rendition of the sky emission at 100, 143,217, 353, 545......, these two high frequency channels are calibrated to within 5% and the 353 GHz channel to the percent level. The 100 and217 GHz channels, which together with the 143 GHz channel determine the high-multipole part of the CMB power spectrum (50 ..., and 857 GHz with an angular resolution ranging from 9.07 to 4.06. The detector noise per (effective) beam solid angle is respectively,10, 6 , 12, and 39 µK in the four lowest HFI frequency channels (100-353 GHz) and 13 and 14 kJy sr-1 in the 545 and 857 GHz channels. Relativeto the 143 GHz channel...
High Frequency Amplitude Detector for GMI Magnetic Sensors
Directory of Open Access Journals (Sweden)
Aktham Asfour
2014-12-01
Full Text Available A new concept of a high-frequency amplitude detector and demodulator for Giant-Magneto-Impedance (GMI sensors is presented. This concept combines a half wave rectifier, with outstanding capabilities and high speed, and a feedback approach that ensures the amplitude detection with easily adjustable gain. The developed detector is capable of measuring high-frequency and very low amplitude signals without the use of diode-based active rectifiers or analog multipliers. The performances of this detector are addressed throughout the paper. The full circuitry of the design is given, together with a comprehensive theoretical study of the concept and experimental validation. The detector has been used for the amplitude measurement of both single frequency and pulsed signals and for the demodulation of amplitude-modulated signals. It has also been successfully integrated in a GMI sensor prototype. Magnetic field and electrical current measurements in open- and closed-loop of this sensor have also been conducted.
Efficient Design of Sierpinski Fractal Antenna for High Frequency Applications
Directory of Open Access Journals (Sweden)
Rajdeep Singh
2014-08-01
Full Text Available A wideband published slot antenna appropriate for wireless code division multiple access (WCDMA and sustaining the international interoperability for microwave access (WiMAX applications is planned here. The antenna is fractal line fed and its construction is based on fractal geometry where the resonance frequency of antenna is dropped by applying iteration methods. Fractal antennas are the most suited for aerospace and UWB applications because of their low profile, light weight and low power handling capacity. They can be designed in a variety of shapes in order to obtain enhanced gain and bandwidth, dual band and circular polarization to even ultra-wideband operation. For the simulation process ANSOFT HFSS (high frequency structure simulator has been used. The effect of antenna dimensions and substrate parameters on the performance of antenna have been discussed. The antenna has been designed using the Arlon substrate with relative permittivity of 1.3 and a substrate of Sierpinski Carpet shaped placed on it. Feed used is the fractal line feed. The designed antenna is a low profile, small size and multiband antenna since it can be operated at different frequencies within the frequency range of 4.3GHz to 11GHz. It includes the frequencies used for wireless WCDMA application and used to receive and transmit a high-frequency signal.
High frequency conductivity of hot electrons in carbon nanotubes
Energy Technology Data Exchange (ETDEWEB)
Amekpewu, M., E-mail: mamek219@gmail.com [Department of Applied Physics, University for Development Studies, Navrongo (Ghana); Mensah, S.Y. [Department of Physics, College of Agriculture and Natural Sciences, U.C.C. (Ghana); Musah, R. [Department of Applied Physics, University for Development Studies, Navrongo (Ghana); Mensah, N.G. [Department of Mathematics, College of Agriculture and Natural Sciences, U.C.C. (Ghana); Abukari, S.S.; Dompreh, K.A. [Department of Physics, College of Agriculture and Natural Sciences, U.C.C. (Ghana)
2016-05-01
High frequency conductivity of hot electrons in undoped single walled achiral Carbon Nanotubes (CNTs) under the influence of ac–dc driven fields was considered. We investigated semi-classically Boltzmann's transport equation with and without the presence of the hot electrons’ source by deriving the current densities in CNTs. Plots of the normalized current density versus frequency of ac-field revealed an increase in both the minimum and maximum peaks of normalized current density at lower frequencies as a result of a strong injection of hot electrons. The applied ac-field plays a twofold role of suppressing the space-charge instability in CNTs and simultaneously pumping an energy for lower frequency generation and amplification of THz radiations. These have enormous promising applications in very different areas of science and technology.
High frequency conductivity of hot electrons in carbon nanotubes
Amekpewu, M.; Mensah, S. Y.; Musah, R.; Mensah, N. G.; Abukari, S. S.; Dompreh, K. A.
2016-05-01
High frequency conductivity of hot electrons in undoped single walled achiral Carbon Nanotubes (CNTs) under the influence of ac-dc driven fields was considered. We investigated semi-classically Boltzmann's transport equation with and without the presence of the hot electrons' source by deriving the current densities in CNTs. Plots of the normalized current density versus frequency of ac-field revealed an increase in both the minimum and maximum peaks of normalized current density at lower frequencies as a result of a strong injection of hot electrons. The applied ac-field plays a twofold role of suppressing the space-charge instability in CNTs and simultaneously pumping an energy for lower frequency generation and amplification of THz radiations. These have enormous promising applications in very different areas of science and technology.
Estimation of optical parameters of highly scattering materials by time-of-flight spectroscopy
Plucinski, Jerzy
2004-07-01
Optical measurement methods are indispensable tool in biomedical research, providing invaluable information on optical properties of biological tissues. However, the application of these techniques is a big challenge, as most tissues are highly scattering materials whose optical properties cannot be measured in a straightforward way, due to multiple scattering of photons. Therefore, new optical measurement techniques and methods for highly scattering media are being developed to address this problem. One of the very promising techniques is time-of-flight spectroscopy. The paper presents problems encountered in reconstruction of basic optical parameters of tissues or other highly scattering materials from optical time-of-flight spectroscopy measurement data. To estimate the reconstruction accuracy of optical parameters (i.e. absorption coefficient, scattering coefficient, anisotropy factor and refractive index) the test data were generated by a computer program simulating light propagation in highly scattering material by Monte Carlo method. Following, a set of computer programs based on diffusion equation and optimization algorithms such as simplex method and genetic method were used to reconstruct optical parameters from the test data. Finally, by comparing reconstructed optical parameters with those used for generation of the test data, the accuracy of reconstructing algorithms it was estimated.
Transverse momentum at work in high-energy scattering experiments
Signori, Andrea
2017-01-01
I will review some aspects of the definition and the phenomenology of Transverse-Momentum-Dependent distributions (TMDs) which are potentially interesting for the physics program at several current and future experimental facilities. First of all, I will review the definition of quark, gluon and Wilson loop TMDs based on gauge invariant hadronic matrix elements. Looking at the phenomenology of quarks, I will address the flavor dependence of the intrinsic transverse momentum in unpolarized TMDs, focusing on its extraction from Semi-Inclusive Deep-Inelastic Scattering. I will also present an estimate of its impact on the transverse momentum spectrum of W and Z bosons produced in unpolarized hadronic collisions and on the determination of the W boson mass. Moreover, the combined effect of the flavor dependence and the evolution of TMDs with the energy scale will be discussed for electron-positron annihilation. Concerning gluons, I will present from an effective theory point of view the TMD factorization theorem for the transverse momentum spectrum of pseudoscalar quarkonium produced in hadronic collisions. Relying on this, I will discuss the possibility of extracting precise information on (un)polarized gluon TMDs at a future Fixed Target Experiment at the LHC (AFTER@LHC).
Conkey, Donald B; Caravaca-Aguirre, Antonio M; Piestun, Rafael
2012-01-16
We introduce a phase-control holographic technique to characterize scattering media with the purpose of focusing light through it. The system generates computer-generated holograms implemented via a deformable mirror device (DMD) based on micro-electro-mechanical technology. The DMD can be updated at high data rates, enabling high speed wavefront measurements using the transmission matrix method. The transmission matrix of a scattering material determines the hologram required for focusing through the scatterer. We demonstrate this technique measuring a transmission matrix with 256 input modes and a single output mode in 33.8 ms and creating a focus with a signal to background ratio of 160. We also demonstrate focusing through a temporally dynamic, strongly scattering sample with short speckle decorrelation times.
High Precision Stokes Polarimetry for Scattering Light using Wide Dynamic Range Intensity Detector
Directory of Open Access Journals (Sweden)
Shibata Shuhei
2015-01-01
Full Text Available This paper proposes a Stokes polarimetry for scattering light from a sample surface. To achieve a high accuracy measurement two approaches of an intensity detector and analysis algorism of a Stokes parameter were proposed. The dynamic range of this detector can achieve up to 1010 by combination of change of neutral-density (ND filters having different density and photon counting units. Stokes parameters can be measured by dual rotating of a retarder and an analyzer. The algorism of dual rotating polarimeter can be calibrated small linear diattenuation and linear retardance error of the retarder. This system can measured Stokes parameters from −20° to 70° of its scattering angle. It is possible to measure Stokes parameters of scattering of dust and scratch of optical device with high precision. This paper shows accuracy of this system, checking the polarization change of scattering angle and influence of beam size.
Casimir force between δ -δ' mirrors transparent at high frequencies
Braga, Alessandra N.; Silva, Jeferson Danilo L.; Alves, Danilo T.
2016-12-01
We investigate, in the context of a real massless scalar field in 1 +1 dimensions, models of partially reflecting mirrors simulated by Dirac δ -δ' point interactions. In the literature, these models do not exhibit full transparency at high frequencies. In order to provide a more realistic feature for these models, we propose a modified δ -δ' point interaction that enables full transparency in the limit of high frequencies. Taking this modified δ -δ' model into account, we investigate the Casimir force, comparing our results with those found in the literature.
A SYNCHRONIZATION ALGORITHM FOR HF (HIGH FREQUENCY) BROADBAND OFDM SYSTEM
Institute of Scientific and Technical Information of China (English)
Yang Lei; Zhang You'ai
2008-01-01
In this letter, a kind of associated synchronization algorithm which is suitable for HF (High Frequency) broadband OFDM (Orthogonal Frequency Division Multiplexing) system is presented based on describing and constructing the GMW (Gorden, Mills and Welch) sequence. The algorithm is based on the Schmidl and Minn's symbol timing principle, the constructed GMW sequence is transmitted and disposed, and the synchronization is adjudicated using the correlation of GMW sequence. The simulation result indicates that this algorithm has high performance synchronization ability under the low SNR (Signal to Noise Ratio) at two different kinds of channel models.
High-frequency performance of electric field sensors aboard the RESONANCE satellite
Sampl, M.; Macher, W.; Gruber, C.; Oswald, T.; Kapper, M.; Rucker, H. O.; Mogilevsky, M.
2015-05-01
We present the high-frequency properties of the eight electric field sensors as proposed to be launched on the spacecraft "RESONANCE" in the near future. Due to the close proximity of the conducting spacecraft body, the sensors (antennas) have complex receiving features and need to be well understood for an optimal mission and spacecraft design. An optimal configuration and precise understanding of the sensor and antenna characteristics is also vital for the proper performance of spaceborne scientific instrumentation and the corresponding data analysis. The provided results are particularly interesting with regard to the planned mutual impedance experiment for measuring plasma parameters. Our computational results describe the extreme dependency of the sensor system with regard to wave incident direction and frequency, and provides the full description of the sensor system as a multi-port scatterer. In particular, goniopolarimetry techniques like polarization analysis and direction finding depend crucially on the presented antenna characteristics.
The effect of metal-contacts on carbon nanotube for high frequency interconnects and devices
Directory of Open Access Journals (Sweden)
George Chimowa
2014-08-01
Full Text Available High frequency characterisation of platinum and tungsten contacts on individual multi-walled carbon nanotubes (MWNT is performed from 10 MHz to 50 GHz. By measuring the scattering parameters of aligned individual MWNTs, we show that metal contacts enhance an inductive response due to the improved MWNT-electrode coupling reducing the capacitive effect. This behaviour is pronounced in the frequency below 10 GHz and strong for tungsten contacts. We explain the inductive response as a result of the interaction of stimulus current with the localized (or defects states present at the contact region resulting in the current lagging behind the voltage. The results are further supported by direct current measurements that show tungsten to significantly increase carbon nanotube-electrode coupling. The immediate consequence is the reduction of the contact resistance, implying a reduction of electron tunnelling barrier from the electrode to the carbon nanotube.
Probing spin frustration in high-symmetry magnetic nanomolecules by inelastic neutron scattering
DEFF Research Database (Denmark)
Garlea, V.O.; Nagler, S.E.; Zarestky, J.L.;
2006-01-01
Low temperature inelastic neutron scattering studies have been performed to characterize the low energy magnetic excitation spectrum of the magnetic nanomolecule {Mo(72)Fe(30)}. This unique highly symmetric cluster features spin frustration and is one of the largest discrete magnetic molecules st...... of the temperature dependence of the observed neutron scattering are explained by a quantum model of the frustrated spin cluster. However, no satisfactory theoretical explanation is yet available for the observed magnetic field dependence....
Sugimura, Hisayuki; Muraoka, Hidekazu; Hiraki, Eiji; Hirota, Izuo; Yasui, Kenji; Omori, Hideki; Lee, Hyun-Woo; Nakaoka, Mutsuo
In this paper, high frequency power converter without DC smoothing electrolytic capacitor filter link which convert the 100V/200Vrms and 60Hz single phase utility frequency AC power into a high frequency AC. This proposed high frequency AC power converter without electrolytic capacitor filter can operate under a principle of soft switching PWM based on a lossless capacitor snubber is proposed and demonstrated for consumer high frequency induction heating (IH). In particular, this high frequency power converter capable of producing a high frequency AC more than 20kHz is developed for consumer IH applications as hot water producer and steamer based on the specially designed spiral type IH-Dual Packs Heater (DPH), which includes the dual mode pulse modulation control scheme based on soft switching PWM for high output power setting and commercial frequency AC zero voltage soft switching pulse density modulation (PDM) for low output power settings. This developed high frequency power frequency converter using trench gate IGBTs is clarified on the basis of experimental and simulation results for its circuit operation of the utility frequency AC to high frequency AC frequency PWM power converter without the electrolytic capacitor bank DC filter link for the IH hot water and IH steamer. These IH appliances are based upon an innovative electromagnetic IH-DPH for fluid heating as heat exchanger in consumer pipeline. Finally, its power regulation characteristics, power conversion efficiency and harmonic current components characteristics including power factor in utility AC grid side are evaluated and discussed from an experimental point of view. The practical effectiveness of this utility frequency AC to high frequency AC soft switching high power frequency converter defined conveniently as high frequency soft switching cyclo-inverter is proved as one of the important products effective for next generation IH application all electricity power utilizations.
High-resolution x-ray scattering studies of charge ordering in highly correlated electron systems
Ghazi, M E
2002-01-01
addition, another very weak satellites with wavevector (1/2, 1, 1/2) were observed possibly due to spin ordering. two-dimensional in nature both by measurements of their correlation lengths and by measurement of the critical exponents of the charge stripe melting transition with an anomaly at x = 0.25. The results show by decreasing the hole concentration from the x = 0.33 to 0.2, the well-correlated charge stripes change to a glassy state at x = 0.25. The electronic transition into the charge stripe phase is second-order without any corresponding structural transition. Above the second-order transition critical scattering was observed due to fluctuations into the charge stripe phase. In a single-crystal of Nd sub 1 sub / sub 2 Sr sub 1 sub / sub 2 MnO sub 3 a series of phase transitions were observed using high-resolution synchrotron X-ray scattering. Above the charge ordering transition temperature, T sub C sub O , by measuring the peak profiles of Bragg reflections as a function of temperature, it was foun...
Frequencies and amplitudes of high-degree solar oscillations
Kaufman, James Morris
Measurements of some of the properties of high-degree solar p- and f-mode oscillations are presented. Using high-resolution velocity images from Big Bear Solar Observatory, we have measured mode frequencies, which provide information about the composition and internal structure of the Sun, and mode velocity amplitudes (corrected for the effects of atmospheric seeing), which tell us about the oscillation excitation and damping mechanisms. We present a new and more accurate table of the Sun's acoustic vibration frequencies, nunl, as a function of radial order n and spherical harmonic degree l. These frequencies are averages over azimuthal order m and approximate the normal mode frequencies of a nonrotating spherically symmetric Sun near solar minimum. The frequencies presented here are for solar p- and f-modes with 180 less than or = l less than or = 1920, 0 less than or = n less than or = 8, and 1.7 mHz less than or = nunl less than or = 5.3 mHz. The uncertainties, sigmanl, in the frequencies areas are as low as 3.1 micro-Hz. The theoretically expected f-mode frequencies are given by omega squared = gkh approx. = gl/R, where g is the gravitational acceleration at the surface, kh is the horizontal component of the wave vector, and R is the radius of the Sun. We find that the observed frequencies are significantly less than expected for l greater than 1000, for which we have no explanation. Observations of high-degree oscillations, which have very small spatial features, suffer from the effects of atmospheric image blurring and image motion (or 'seeing'), thereby reducing the amplitudes of their spatial-frequency components. In an attempt to correct the velocity amplitudes for these effects, we simultaneously measured the atmospheric modulation transfer function (MTF) by looking at the effects of seeing on the solar limb. We are able to correct the velocity amplitudes using the MTF out to l approx. = 1200. We find that the frequency of the peak velocity power (as a
Note: High precision measurements using high frequency gigahertz signals
Jin, Aohan; Fu, Siyuan; Sakurai, Atsunori; Liu, Liang; Edman, Fredrik; Pullerits, Tõnu; Öwall, Viktor; Karki, Khadga Jung
2014-12-01
Generalized lock-in amplifiers use digital cavities with Q-factors as high as 5 × 108 to measure signals with very high precision. In this Note, we show that generalized lock-in amplifiers can be used to analyze microwave (giga-hertz) signals with a precision of few tens of hertz. We propose that the physical changes in the medium of propagation can be measured precisely by the ultra-high precision measurement of the signal. We provide evidence to our proposition by verifying the Newton's law of cooling by measuring the effect of change in temperature on the phase and amplitude of the signals propagating through two calibrated cables. The technique could be used to precisely measure different physical properties of the propagation medium, for example, the change in length, resistance, etc. Real time implementation of the technique can open up new methodologies of in situ virtual metrology in material design.
Computation of High-Frequency Waves with Random Uncertainty
Malenova, Gabriela
2016-01-06
We consider the forward propagation of uncertainty in high-frequency waves, described by the second order wave equation with highly oscillatory initial data. The main sources of uncertainty are the wave speed and/or the initial phase and amplitude, described by a finite number of random variables with known joint probability distribution. We propose a stochastic spectral asymptotic method [1] for computing the statistics of uncertain output quantities of interest (QoIs), which are often linear or nonlinear functionals of the wave solution and its spatial/temporal derivatives. The numerical scheme combines two techniques: a high-frequency method based on Gaussian beams [2, 3], a sparse stochastic collocation method [4]. The fast spectral convergence of the proposed method depends crucially on the presence of high stochastic regularity of the QoI independent of the wave frequency. In general, the high-frequency wave solutions to parametric hyperbolic equations are highly oscillatory and non-smooth in both physical and stochastic spaces. Consequently, the stochastic regularity of the QoI, which is a functional of the wave solution, may in principle below and depend on frequency. In the present work, we provide theoretical arguments and numerical evidence that physically motivated QoIs based on local averages of |uE|2 are smooth, with derivatives in the stochastic space uniformly bounded in E, where uE and E denote the highly oscillatory wave solution and the short wavelength, respectively. This observable related regularity makes the proposed approach more efficient than current asymptotic approaches based on Monte Carlo sampling techniques.
Estimation of frequency wave spectrum from high frequency radar data using a parametric model
Toro, V. G.; Ocampo, F. J.; Flores-Vidal, X.; Durazo, R.; Flament, P. J.
2011-12-01
Models that obtain wave information from high frequency radars (HF) use information of the measured second order Doppler spectrum. The estimation is completed through an integral equation as in the case of the Barrick model, or linearly as in the Hasselmann model. For the latter, the linear form uses a parameter (α) obtained using an exclusive set of data (EuroROSE) which suggests a universal expression of such parameter. In this work we developed a methodology and better approach to extract second order information from the Doppler spectra, and a new parameterization for α was obtained by comparing with in situ measured information in the Gulf of Tehuantepec (GT), Mexico. We present frequency spectra and significant wave height obtained for a four-month data set in the GT, during the season of strong (> 10 ms-1) northerly gap winds. We found that signal strength of Doppler spectra showed a clear diurnal cycle. The time average of these spectra allowed us to select the spectra with high SNR value. The second-order information obtained was used in the mathematical model of Hasselmann, and found that α, which is a function of frequency, depends on wind speed (U10). The results suggest a good agreement between the data measured by the ASIS buoy and those obtained by the Hasselmann model. The results showed improvement in the estimation of wave frequency spectrum and pointed at the need to have a theoretical model for α to be used in any data set.
Planck early results. VI. The High Frequency Instrument data processing
DEFF Research Database (Denmark)
Bucher, M.; Castex, G.; Colley, J.-M.
2011-01-01
We describe the processing of the 336 billion raw data samples from the High Frequency Instrument (HFI) which we performed to produce six temperature maps from the first 295 days of Planck-HFI survey data. These maps provide an accurate rendition of the sky emission at 100, 143, 217, 353, 545...... and 857 GHz with an angular resolution ranging from 9.9 to 4.4′. The white noise level is around 1.5 μK degree or less in the 3 main CMB channels (100-217 GHz). The photometric accuracy is better than 2% at frequencies between 100 and 353 GHz and around 7% at the two highest frequencies. The maps created...... to be of high quality and we expect that with further refinements of the data processing we should be able to achieve, or exceed, the science goals of the Planck project. © ESO, 2011....
Automated screening for high-frequency hearing loss.
Vlaming, Marcel S M G; MacKinnon, Robert C; Jansen, Marije; Moore, David R
2014-01-01
Hearing loss at high frequencies produces perceptual difficulties and is often an early sign of a more general hearing loss. This study reports the development and validation of two new speech-based hearing screening tests in English that focus on detecting hearing loss at frequencies above 2000 Hz. The Internet-delivered, speech-in noise tests used closed target-word sets of digit triplets or consonant-vowel-consonant (CVC) words presented against a speech-shaped noise masker. The digit triplet test uses the digits 0 to 9 (excluding the disyllabic 7), grouped in quasi-random triplets. The CVC test uses simple words (e.g., "cat") selected for the high-frequency spectral content of the consonants. During testing, triplets or CVC words were identified in an adaptive procedure to obtain the speech reception threshold (SRT) in noise. For these new, high-frequency (HF) tests, the noise was low-pass filtered to produce greater masking of the low-frequency speech components, increasing the sensitivity of the test for HF hearing loss. Individual test tokens (digits, CVCs) were first homogenized using a group of 10 normal-hearing (NH) listeners by equalizing intelligibility across tokens at several speech-in-noise levels. Both tests were then validated and standardized using groups of 24 NH listeners and 50 listeners with hearing impairment. Performance on the new high frequency digit triplet (HF-triplet) and CVC (HF-CVC) tests was compared with audiometric hearing loss, and with that on the unfiltered, broadband digit triplet test (BB-triplet) test, and the ASL (Adaptive Sentence Lists) speech-in-noise test. The HF-triplet and HF-CVC test results (SRT) both correlated positively and highly with high-frequency audiometric hearing loss and with the ASL test. SRT for both tests as a function of high-frequency hearing loss increased at nearly three times the rate as that of the BB-triplet test. The intraindividual variability (SD) on the tests was about 2.1 (HF-triplet) and 1
Moore, Brian C J; Glasberg, Brian R; Stoev, Martin; Füllgrabe, Christian; Hopkins, Kathryn
2012-02-01
Sensitivity to temporal fine structure (TFS) at low frequencies may be adversely affected by hearing loss at high frequencies even when absolute thresholds at low frequencies are within the normal range. However, in several studies suggesting this, the effects of hearing loss and age were confounded. Here, interaural phase discrimination (IPD) thresholds for pure tones at 500 and 750 Hz were measured for 39 subjects with ages from 61 to 83 yr. All subjects had near-normal audiometric thresholds at low frequencies, but thresholds varied across subjects at high frequencies. IPD thresholds were correlated with age. IPD thresholds for the test frequency of 750 Hz were weakly correlated with absolute thresholds at high frequencies, but these correlations became non-significant when the effect of age was partialed out. The results do not confirm that sensitivity to TFS at low frequencies is influenced by hearing loss at high frequencies, independently of age.
High frequency modeling of power transformers. Stresses and diagnostics
Energy Technology Data Exchange (ETDEWEB)
Bjerkan, Eilert
2005-05-15
In this thesis a reliable, versatile and rigorous method for high frequency power transformer modeling is searched and established. The purpose is to apply this model to sensitivity analysis of FRA (Frequency Response Analysis) which is a quite new diagnostic method for assessing the mechanical integrity of power transformer windings on-site. The method should be versatile in terms of being able to estimate internal and external over voltages and resonances. Another important aspect is that the method chosen is suitable for real transformer geometries. In order to verify the suitability of the model for real transformers, a specific test-object is used. This is a 20MVA transformer, and details are given in chapter 1.4. The high frequency power transformer model is established from geometrical and constructional information from the manufacturer, together with available material characteristics. All circuit parameters in the lumped circuit representation are calculated based on these data. No empirical modifications need to be performed. Comparison shows capability of reasonable accuracy in the range from 10 khz to 1 MHz utilizing a disc-to-disc representation. A compromise between accuracy of model due to discretization and complexity of the model in a turn-to-turn representation is inevitable. The importance of the iron core is emphasized through a comparison of representations with/without the core included. Frequency-dependent phenomena are accurately represented using an isotropic equivalent for windings and core, even with a coarse mesh for the FEM-model. This is achieved through a frequency-dependent complex permeability representation of the materials. This permeability is deduced from an analytical solution of the frequency-dependent magnetic field inside the conductors and the core. The importance of dielectric losses in a transformer model is also assessed. Since published data on the high frequency properties of press board are limited, some initial
Feynman diagram approach to high-energy scattering from lightest nuclei
Energy Technology Data Exchange (ETDEWEB)
Frankfurt, L. [Tel Aviv Univ. (Israel). School of Physics and Astronomy]|[Institute for Nuclear Physics, St. Petersburg (Russian Federation); Piller, G. [Physik Department, Technische Universitaet Muenchen, 85747 Garching (Germany); Sargsian, M. [Physik Department, Technische Universitaet Muenchen, 85747 Garching (Germany)]|[Yerevan Physics Institute, Yerevan 375036 (Armenia); Strikman, M. [Institute for Nuclear Physics, St. Petersburg (Russian Federation)]|[Pennsylvania Univ. (United States). American Center for the Study of Distance Education
1998-03-02
We outline a Feynman diagram approach to high-energy scattering from the lightest nuclei. It allows to describe high-energy (semi-) exclusive nuclear reactions at large recoil energies. In such processes the conventional Glauber approach is not applicable. This is demonstrated for high-Q{sup 2} nucleon knock-out processes and vector-meson electroproduction. (orig.). 12 refs.
Scattering-dominated high-temperature phase of 1 T -TiS e2 : An optical conductivity study
Velebit, K.; Popčević, P.; Batistić, I.; Eichler, M.; Berger, H.; Forró, L.; Dressel, M.; Barišić, N.; Tutiš, E.
2016-08-01
The controversy regarding the precise nature of the high-temperature phase of 1 T -TiS e2 lasts for decades. It has intensified in recent times when new evidence for the excitonic origin of the low-temperature charge-density wave state started to unveil. Here we address the problem of the high-temperature phase through precise measurements and detailed analysis of the optical response of 1 T -TiS e2 single crystals. The separate responses of electron and hole subsystems are identified and followed in temperature. We show that neither semiconductor nor semimetal pictures can be applied in their generic forms as the scattering for both types of carriers is in the vicinity of the Ioffe-Regel limit with decay rates being comparable to or larger than the offsets of band extrema. The nonmetallic temperature dependence of transport properties comes from the anomalous temperature dependence of scattering rates. Near the transition temperature the heavy electrons and the light holes contribute equally to the conductivity; this surprising coincidence is regarded as the consequence of dominant intervalley scattering that precedes the transition. The low-frequency peak in the optical spectra is identified and attributed to the critical softening of the L -point collective mode.
High-frequency Pulse-tube Refrigerator for 4 K
Tanaeva, I. A.; Klaasse Bos, C. G.; de Waele, A. T. A. M.
2006-04-01
At present pulse-tube refrigerators (PTRs), used for the important temperature region of 4 K, are of the Gifford-McMahon (GM)-type. The main sources of losses in GM-type PTRs are the compressor and the rotary valve. The efficiency of the combination of the compressor and the rotary valve is only about 30%. In addition to that GM-type compressors are heavy and need periodic maintenance. The main goal of this research is to develop a Stirling-type 4-K pulse-tube refrigerator. This implies higher operating frequencies, compared to the usual 1-2 Hz. At higher frequencies a number of properties of a pulse-tube system, such as length-to-diameter ratios of the pulse tubes and the regenerator, volume and configuration of a regenerator material, phase-shift control method, etc., change significantly, and, therefore, require detailed study. The interactions between various parameters of the pulse tube and of the linear compressor are very complicated. Therefore, as a first part of this research, we study the pulse tube at high frequencies, independent of the compressor. We generate high-frequency pressure oscillations, using a GM-type compressor and a special type of rotary valve, which enables us to operate at frequencies up to 20 Hz. Results of this work are described in this contribution.
Alpha particle collective Thomson scattering in TFTR
Energy Technology Data Exchange (ETDEWEB)
Machuzak, J.S.; Woskov, P.P.; Rhee, D.Y.; Gilmore, J. [Massachusetts Inst. of Tech., Cambridge, MA (United States). Plasma Fusion Center; Bretz, N.L.; Park, H.K. [Princeton Univ., NJ (United States). Plasma Physics Lab.; Aamodt, R.E.; Cheung, P.Y.; Russell, D.A. [Lodestar Research Corp., Boulder, CO (United States); Bindslev, H. [JET Joint Undertaking, Abingdon (United Kingdom)
1993-11-01
A collective Thomson scattering diagnostic is being implemented on TFTR to measure alpha particle, energetic and thermal ion densities and velocity distributions. A 60 GHz, 0.1-1 kW gyrotron will be used as the transmitter source, and the scattering geometry will be perpendicular to the magnetic field in the extraordinary mode polarization. An enhanced scattered signal is anticipated from fluctuations in the lower hybrid frequency range with this scattering geometry. Millimeter wave collective Thomson scattering diagnostics have the advantage of larger scattering angles to decrease the amount of stray light, and long, high power, modulated pulses to obtain improved signal to noise through synchronous detection techniques.
Modelling financial high frequency data using point processes
DEFF Research Database (Denmark)
Hautsch, Nikolaus; Bauwens, Luc
In this chapter written for a forthcoming Handbook of Financial Time Series to be published by Springer-Verlag, we review the econometric literature on dynamic duration and intensity processes applied to high frequency financial data, which was boosted by the work of Engle and Russell (1997...
Very High Frequency Interleaved Self-Oscillating Resonant SEPIC Converter
DEFF Research Database (Denmark)
Kovacevic, Milovan; Knott, Arnold; Andersen, Michael A. E.
2013-01-01
This paper describes analysis and design procedure of an interleaved, self-oscillating resonant SEPIC converter, suitable for operation at very high frequencies (VHF) ranging from 30 MHz to 300 MHz. The presented circuit consists of two resonant SEPIC DC-DC converters, and a capacitive...
Very High Frequency Half Bridge DC/DC Converter
DEFF Research Database (Denmark)
Madsen, Mickey Pierre; Knott, Arnold; Andersen, Michael A. E.
2014-01-01
This paper presents the first, off chip, class DE (resonant half bridge) converter working in the Very High Frequency (VHF) range. The benefits of using half bridge circuits both in the inverter and rectifier part of a VHF resonant dc/dc converter are analyzed and design equations for all...
Current barriers to confine high frequency common mode currents
Moonen, Dominicus Johannes Guilielmus; Buesink, Frederik Johannes Karel; Leferink, Frank Bernardus Johannes
2016-01-01
A commercially produced three phase power line filter is submitted to a Current Barrier (CB) Electro-Magnetic Compatibility (EMC) zoning strategy as an attempt to confine high frequency common mode currents. The intent of the paper is not to show how to build a ’perfect’ filter, since this is known.
High Frequency State-Variable Biquadratic Active Filters
Directory of Open Access Journals (Sweden)
T. Dostal
1998-04-01
Full Text Available The state-variable (KHN active RC biquadratic filters with good performance in high frequency range , flexibility of outputs (LP, HP, BP, low sensitivities in novel current and hybrid modes, using current conveyors, transimpedance, trans-admittance and current operational amplifiers, are given in this paper.
Modelling financial high frequency data using point processes
DEFF Research Database (Denmark)
Hautsch, Nikolaus; Bauwens, Luc
In this chapter written for a forthcoming Handbook of Financial Time Series to be published by Springer-Verlag, we review the econometric literature on dynamic duration and intensity processes applied to high frequency financial data, which was boosted by the work of Engle and Russell (1997......) on autoregressive duration models...
Piping system subjected to seismic hard rock high frequencies
Energy Technology Data Exchange (ETDEWEB)
Rydell, Cecilia, E-mail: cecilia.rydell@byv.kth.se [KTH Royal Institute of Technology, SE-100 44 Stockholm (Sweden); Vattenfall AB, SE-169 92 Stockholm (Sweden); Malm, Richard; Ansell, Anders [KTH Royal Institute of Technology, SE-100 44 Stockholm (Sweden)
2014-10-15
Highlights: • A study of the influence of support gaps in the analysis of a piping system. • Piping system located within a nuclear power plant reactor containment building. • Piping system subjected to a seismic hard rock high-frequency load. • Comparison of low- and high-frequency seismic loads. • The influence on the stress response of piping and acceleration response of valves. - Abstract: This paper addresses the influence of support gaps in the analyses of a piping system when subjected to a seismic hard rock high-frequency load. The system is located within the reactor containment building of a nuclear power plant and is assessed to be susceptible to high-frequency loads. The stress response of the pipe and the acceleration response of the valves are evaluated for different support gap sizes. It is shown that the inclusion of the support gaps in the analyses reduces the stress response for almost all pipe elements. On the other hand, the acceleration response of the valves is not necessarily reduced by the consideration of the gaps.
High frequency ultrasound imaging of a single-species biofilm
Shemesh, H.; Goertz, D. E.; van der Sluis, L. W. M.; de Jong, N.; Wu, M. K.; Wesselink, P. R.
2007-01-01
Objective: This study evaluated the feasibility of a high frequency ultrasound scan to examine the 3D morphology of Streptococcus mutans biofilms grown in vitro. Methods: Six 2-day S. mutans biofilms and six 7-day biofilms were grown on tissue culture membranes and on bovine dentine discs. A sterile
High-frequency Trading, Algorithmic Finance, and the Flash Crash
DEFF Research Database (Denmark)
Borch, Christian
2016-01-01
The Flash Crash of 6 May 2010 has an interesting status in discussions of high-frequency trading, i.e. fully automated, superfast computerized trading: it is invoked both as an important illustration of how this field of algorithmic trading operates and, more often, as an example of how fully aut...
Frequency of Guns in the Households of High School Seniors
Coker, Ann L.; Bush, Heather M.; Follingstad, Diane R.; Brancato, Candace J.
2017-01-01
Background: In 2013, President Obama lifted the federal ban on gun violence research. The current study provides one of the first reports to estimate household gun ownership as reported by youth. Methods: In this cohort study of 3,006 high school seniors from 24 schools, we examined the frequency of household guns ownership. Results: About 65%…
Piezoelectric films for high frequency ultrasonic transducers in biomedical applications.
Zhou, Qifa; Lau, Sienting; Wu, Dawei; Shung, K Kirk
2011-02-01
Piezoelectric films have recently attracted considerable attention in the development of various sensor and actuator devices such as nonvolatile memories, tunable microwave circuits and ultrasound transducers. In this paper, an overview of the state of art in piezoelectric films for high frequency transducer applications is presented. Firstly, the basic principles of piezoelectric materials and design considerations for ultrasound transducers will be introduced. Following the review, the current status of the piezoelectric films and recent progress in the development of high frequency ultrasonic transducers will be discussed. Then details for preparation and structure of the materials derived from piezoelectric thick film technologies will be described. Both chemical and physical methods are included in the discussion, namely, the sol-gel approach, aerosol technology and hydrothermal method. The electric and piezoelectric properties of the piezoelectric films, which are very important for transducer applications, such as permittivity and electromechanical coupling factor, are also addressed. Finally, the recent developments in the high frequency transducers and arrays with piezoelectric ZnO and PZT thick film using MEMS technology are presented. In addition, current problems and further direction of the piezoelectric films for very high frequency ultrasound application (up to GHz) are also discussed.
Frequency of Guns in the Households of High School Seniors
Coker, Ann L.; Bush, Heather M.; Follingstad, Diane R.; Brancato, Candace J.
2017-01-01
Background: In 2013, President Obama lifted the federal ban on gun violence research. The current study provides one of the first reports to estimate household gun ownership as reported by youth. Methods: In this cohort study of 3,006 high school seniors from 24 schools, we examined the frequency of household guns ownership. Results: About 65%…
Vacuum amplification of the high-frequency electromagnetic radiation
Vilkovisky, G. A.
1998-01-01
When an electrically charged source is capable of both emitting the electromagnetic waves and creating charged particles from the vacuum, its radiation gets so much amplified that only the backreaction of the vacuum makes it finite. The released energy and charge are calculated in the high-frequency approximation. The technique of expectation values is advanced and employed.
On the high frequency spectrum of a classical accretion disc
Balbus, Steven A
2014-01-01
We derive simple and explicit expressions for the high frequency spectrum of a classical accretion disc. Both stress-free and finite stress inner boundaries are considered. A classical accretion disc spectrum with a stress-free inner boundary departs from a Wien spectrum at large $\
Practical techniques for enhancing the high-frequency MASW method
For soil exploration in the vadose zone, a high-frequency multi-channel analysis of surface waves (HF-MASW) method has been developed. In the study, several practical techniques were applied to enhance the overtone image of the HF-MASW method. They included (1) the self-adaptive MASW method using a ...
Phase controlled dc-ac converter with high frequency switching
Harada, Koosuke; Sakamoto, Hiroshi; Shoyama, Masahito
A sinusoidal dc-ac converter is presented in which a pair of switches is placed on each side of the primary and secondary of the isolation transformer. This converter is controlled by the phase difference between the two pairs of switches. The transformer is miniaturized by making the switching frequency high. This converter is especially suitable for small uninterruptible power supply systems.
Fact or friction: jumps at ultra high frequency
K. Christensen; R. Oomen; M. Podolskij
2011-01-01
In this paper, we demonstrate that jumps in financial asset prices are not nearly as common as generally thought, and that they account for only a very small proportion of total return variation. We base our investigation on an extensive set of ultra high-frequency equity and foreign exchange rate d
Influence of pore roughness on high-frequency permeability
Cortis, A.; Smeulders, D.M.J.; Guermond, J.L.; Lafarge, D.
2003-01-01
The high-frequency behavior of the fluid velocity patterns for smooth and corrugated pore channels is studied. The classical approach of Johnson et al. [J. Fluid Mech. 176, 379 (1987)] for smooth geometries is obtained in different manners, thus clarifying differences with Sheng and Zhou [Phys. Rev.
Collocations of High Frequency Noun Keywords in Prescribed Science Textbooks
Menon, Sujatha; Mukundan, Jayakaran
2012-01-01
This paper analyses the discourse of science through the study of collocational patterns of high frequency noun keywords in science textbooks used by upper secondary students in Malaysia. Research has shown that one of the areas of difficulty in science discourse concerns lexis, especially that of collocations. This paper describes a corpus-based…
Energy Technology Data Exchange (ETDEWEB)
Botrel, J.L. [CEA-LETI 17, rue des Martyrs 38054 Grenoble (France); IMEP 23, rue des Martyrs 38016 Grenoble (France)], E-mail: jean-loius.botrel@cea.fr; Savry, O.; Rozeau, O.; Templier, F. [CEA-LETI 17, rue des Martyrs 38054 Grenoble (France); Jomaah, J. [IMEP 23, rue des Martyrs 38016 Grenoble (France)
2007-07-16
Laser Crystallised Polysilicon Thin Film Transistors have now sufficient good conduction properties to be used in high-frequency applications. In this work, we report the results for 5 {mu}m long polysilicon TFTs obtained at frequencies up to several hundred MHz for applications such as RFID tags or System-On-Panel. In order to investigate the device operation, DC and AC two-dimensional simulations of these devices in the Effective Medium framework have been performed. In the light of simulation results, the effects of carrier trapping and carrier transit on the device capacitances as a function of dimensions are analysed and compared. An equivalent small-signal circuit which accounts for the behaviour of these transistors in all regions of operation is proposed and a model for the most relevant elements of this circuit is presented. To validate our simulation results, scattering-parameters (S-parameters) measurements are performed for several structures such as multi-finger, serpentine and linear architectures and the most meaningful parameters will be given. Cut-off frequencies as high as 300 MHz and maximum oscillation frequencies of about 600 MHz have been extracted.
Cahyadi, Harsono; Iwatsuka, Junichi; Minamikawa, Takeo; Niioka, Hirohiko; Araki, Tsutomu; Hashimoto, Mamoru
2013-09-01
We develop a coherent anti-Stokes Raman scattering (CARS) microscopy system equipped with a tunable picosecond laser for high-speed wavelength scanning. An acousto-optic tunable filter (AOTF) is integrated in the laser cavity to enable wavelength scanning by varying the radio frequency waves applied to the AOTF crystal. An end mirror attached on a piezoelectric actuator and a pair of parallel plates driven by galvanometer motors are also introduced into the cavity to compensate for changes in the cavity length during wavelength scanning to allow synchronization with another picosecond laser. We demonstrate fast spectral imaging of 3T3-L1 adipocytes every 5 cm-1 in the Raman spectral region around 2850 cm-1 with an image acquisition time of 120 ms. We also demonstrate fast switching of Raman shifts between 2100 and 2850 cm-1, corresponding to CD2 symmetric stretching and CH2 symmetric stretching vibrations, respectively. The fast-switching CARS images reveal different locations of recrystallized deuterated and nondeuterated stearic acid.
The comparison of three high-frequency chest compression devices.
Lee, Yong W; Lee, Jongwon; Warwick, Warren J
2008-01-01
High-frequency chest compression (HFCC) is shown to enhance clearance of pulmonary airway secretions. Several HFCC devices have been designed to provide this therapy. Standard equipment consists of an air pulse generator attached by lengths of tubing to an adjustable, inflatable vest/jacket (V/J) garment. In this study, the V/Js were fitted over a mannequin. The three device air pulse generators produced characteristic waveform patterns. The variations in the frequency and pressure setting of devices were consistent with specific device design features. These studies suggest that a better understanding of the effects of different waveform, frequency, and pressure combinations may improve HFCC therapeutic efficacy of three different HFCC machines. The V/J component of HFCC devices delivers the compressive pulses to the chest wall to produce both airflow through and oscillatory effects in the airways. The V/J pressures of three HFCC machines were measured and analyzed to characterize the frequency, pressure, and waveform patterns generated by each of three device models. The dimensions of all V/Js were adjusted to a circumference of approximately 110% of the chest circumference. The V/J pressures were measured, and maximum, minimum, and mean pressure, pulse pressure, and root mean square of three pulse generators were calculated. Jacket pressures ranged between 2 and 34 mmHg. The 103 and 104 models' pulse pressures increased with the increase in HFCC frequency at constant dial pressure. With the ICS the pulse pressure decreased when the frequency increased. The waveforms of models 103 and 104 were symmetric sine wave and asymmetric sine wave patterns, respectively. The ICS had a triangular waveform. At 20 Hz, both the 103 and 104 were symmetric sine waveform but the ICS remained triangular. Maximum crest factors emerged in low-frequency and high-pressure settings for the ICS and in the high-frequency and low-pressure settings for models 103 and 104. Recognizing the
High-frequency Oscillations in Eyewalls of Tropical Cyclones
Li, Weibiao; Chen, Shumin
2017-04-01
High-frequency oscillations, with periods of about 2 hours, are first identified by applying wavelet analysis to observed minutely wind speeds around the eye and eyewall of tropical cyclones (TCs). Analysis of a model simulation of Typhoon Hagupit (2008) shows that the oscillations also occur in the intensity of TC, vertical motion, convergence activity and air density around the eyewall. Sequences of oscillations in these variables follow a certain order. In a typical cycle, the drop of density in the planetary boundary layer (PBL) is followed by an increase in the inward radial wind; this enhanced frictional convergence causes increase in density, followed by a decrease in the inward radial wind. The increase in convergence in the PBL causes increase of updraft at the top of the PBL, followed by high vertical velocity at high altitude of 8-10 km, then the increase of the maximum wind speed, and vice versa. Key words: tropical cyclone, high-frequency oscillations, eyewall, intensity
Dolmatov, V K; Cooper, M B; Hunter, M E
2015-01-01
Electron elastic-scattering phase shifts and cross sections along with the differential and total cross sections and polarization of low-frequency bremsstrahlung upon low-energy electron collision with endohedral fullerenes $A$@C$_{60}$ are theoretically scrutinized versus the nature, size and spin of the encapsulated atom $A$. The case-study-atoms $A$ are N, Ar, Cr, Mn, Mo, Tc, Xe, Ba, and Eu. They are thoughtfully picked out of different rows of the periodic table. The study is performed in the framework of a model static approximation. There, both the encapsulated atom $A$ and C$_{60}$ cage are regarded as non-polarizable targets. The C$_{60}$ cage is modeled by an attractive spherical annular potential well. The study provides the most complete initial understanding of how the processes of interest might evolve upon electron collision with various $A$@C$_{60}$. Calculated results identify the most interesting and/or useful future measurements or more rigorous calculations of an electron+$A$@C$_{60}$ colli...
Mai, Paul Martin
2010-09-20
We present a new approach for computing broadband (0-10 Hz) synthetic seismograms by combining high-frequency (HF) scattering with low-frequency (LF) deterministic seismograms, considering finite-fault earthquake rupture models embedded in 3D earth structure. Site-specific HF-scattering Green\\'s functions for a heterogeneous medium with uniformly distributed random isotropic scatterers are convolved with a source-time function that characterizes the temporal evolution of the rupture process. These scatterograms are then reconciled with the LF-deterministic waveforms using a frequency-domain optimization to match both amplitude and phase spectra around the target intersection frequency. The scattering parameters of the medium, scattering attenuation ηs, intrinsic attenuation ηi, and site-kappa, as well as frequency-dependent attenuation, determine waveform and spectral character of the HF-synthetics and thus affect the hybrid broadband seismograms. Applying our methodology to the 1994 Northridge earthquake and validating against near-field recordings at 24 sites, we find that our technique provides realistic broadband waveforms and consistently reproduces LF ground-motion intensities for two independent source descriptions. The least biased results, compared to recorded strong-motion data, are obtained after applying a frequency-dependent site-amplification factor to the broadband simulations. This innovative hybrid ground-motion simulation approach, applicable to any arbitrarily complex earthquake source model, is well suited for seismic hazard analysis and ground-motion estimation.
High-Energy String Scattering Amplitudes and Signless Stirling Number Identity
Directory of Open Access Journals (Sweden)
Jen-Chi Lee
2012-07-01
Full Text Available We give a complete proof of a set of identities (7 proposed recently from calculation of high-energy string scattering amplitudes. These identities allow one to extract ratios among high-energy string scattering amplitudes in the fixed angle regime from high-energy amplitudes in the Regge regime. The proof is based on a signless Stirling number identity in combinatorial theory. The results are valid for arbitrary real values L rather than only for L=0,1 proved previously. The identities for non-integer real value L were recently shown to be realized in high-energy compactified string scattering amplitudes [He S., Lee J.C., Yang Y., arXiv:1012.3158]. The parameter L is related to the mass level of an excited string state and can take non-integer values for Kaluza-Klein modes.
Clinical Implications High Frequency Chest Wall Oscillation (HFCWO)
Mantellini E.; Perrero L.; Petrozzino S.; Gatta A.; Bona S.
2012-01-01
Purpose: patients with neuromuscular diseases presents an high incidence of respiratory infections favoured by stagnation of deep bronchial secretions and deficit of cough. The aim of the study is to evaluate the correct treatment of this condition and the role of High Frequency Chest Wall Oscillation (HFCWO) in helping the removal of bronchial secretions and reduce the incidence of infections in patients with neuromuscular disease.Methods: analysis of the current bibliography related to resp...
High resolution mid-infrared spectroscopy based on frequency upconversion
DEFF Research Database (Denmark)
Dam, Jeppe Seidelin; Hu, Qi; Tidemand-Lichtenberg, Peter
2013-01-01
We present high resolution upconversion of incoherent infrared radiation by means of sum-frequency mixing with a laser followed by simple CCD Si-camera detection. Noise associated with upconversion is, in strong contrast to room temperature direct mid-IR detection, extremely small, thus very faint...... signals can be analyzed. The obtainable frequency resolution is usually in the nm range where sub nm resolution is preferred in many applications, like gas spectroscopy. In this work we demonstrate how to obtain sub nm resolution when using upconversion. In the presented realization one object point...
High frequency microphone measurements for transition detection on airfoils
DEFF Research Database (Denmark)
Døssing, Mads
Time series of pressure fluctuations has been obtained using high frequency microphones distributed over the surface of airfoils undergoing wind tunnel tests in the LM Windtunnel, owned by ’LM Glasfiber’, Denmark. The present report describes the dataanalysis, with special attention given...... pressure) and Tollmien-Schlichting frequencies. The tests were made at Reynolds and Mach numbers corresponding to the operating conditions of a typical horizontal axis wind turbine (HAWT). The Risø B1-18, Risø C2-18 and NACA0015 profiles were tested and the measured transition points are reported....
Dynamics and sensitivity analysis of high-frequency conduction block
Ackermann, D. Michael; Bhadra, Niloy; Gerges, Meana; Thomas, Peter J.
2011-10-01
The local delivery of extracellular high-frequency stimulation (HFS) has been shown to be a fast acting and quickly reversible method of blocking neural conduction and is currently being pursued for several clinical indications. However, the mechanism for this type of nerve block remains unclear. In this study, we investigate two hypotheses: (1) depolarizing currents promote conduction block via inactivation of sodium channels and (2) the gating dynamics of the fast sodium channel are the primary determinate of minimal blocking frequency. Hypothesis 1 was investigated using a combined modeling and experimental study to investigate the effect of depolarizing and hyperpolarizing currents on high-frequency block. The results of the modeling study show that both depolarizing and hyperpolarizing currents play an important role in conduction block and that the conductance to each of three ionic currents increases relative to resting values during HFS. However, depolarizing currents were found to promote the blocking effect, and hyperpolarizing currents were found to diminish the blocking effect. Inward sodium currents were larger than the sum of the outward currents, resulting in a net depolarization of the nodal membrane. Our experimental results support these findings and closely match results from the equivalent modeling scenario: intra-peritoneal administration of the persistent sodium channel blocker ranolazine resulted in an increase in the amplitude of HFS required to produce conduction block in rats, confirming that depolarizing currents promote the conduction block phenomenon. Hypothesis 2 was investigated using a spectral analysis of the channel gating variables in a single-fiber axon model. The results of this study suggested a relationship between the dynamical properties of specific ion channel gating elements and the contributions of corresponding conductances to block onset. Specifically, we show that the dynamics of the fast sodium inactivation gate are
The wave buoy analogy - estimating high-frequency wave excitations
DEFF Research Database (Denmark)
Nielsen, Ulrik Dam
2008-01-01
The paper deals with the wave buoy analogy where a ship is considered as a wave buoy, so that measured ship responses are used as a basis to estimate wave spectra and associated sea state parameters. The study presented follows up on a previous paper, Nielsen [Nielsen UD. Response-based estimation...... processes are carried out in the present paper; however with one of the responses being the relative motion which is a type of response that is sensitive to high-frequency excitations. Based on the present study it is shown that by including the relative motion, the frequency-wise energy distribution can...
Reghu, T; Mandloi, V; Shrivastava, Purushottam
2016-04-01
The design and development of a compact high voltage, high peak power, high frequency transformer for a converter type modulator of klystron amplifiers is presented. The transformer has been designed to operate at a frequency of 20 kHz and at a flux swing of ±0.6 T. Iron (Fe) based nanocrystalline material has been selected as a core for the construction of the transformer. The transformer employs a specially designed solid Teflon bobbin having 120 kV insulation for winding the high voltage secondary windings. The flux swing of the core has been experimentally found by plotting the hysteresis loop at actual operating conditions. Based on the design, a prototype transformer has been built which is per se a unique combination of high voltage, high frequency, and peak power specifications. The transformer was able to provide 58 kV (pk-pk) at the secondary with a peak power handling capability of 700 kVA. The transformation ratio was 1:17. The performance of the transformer is also presented and discussed.
High frequency wide-band transformer uses coax to achieve high turn ratio and flat response
De Parry, T.
1966-01-01
Center-tap push-pull transformer with toroidal core helically wound with a single coaxial cable creates a high frequency wideband transformer. This transformer has a high-turn ratio, a high coupling coefficient, and a flat broadband response.
Nuclear forward scattering of synchrotron radiation in pulsed high magnetic fields.
Strohm, C; Van der Linden, P; Rüffer, R
2010-02-26
We report the demonstration of nuclear forward scattering of synchrotron radiation from 57Fe in ferromagnetic alpha iron in pulsed high magnetic fields up to 30 T. The observed magnetic hyperfine field follows the calculated high field bulk magnetization within 1%, establishing the technique as a precise tool for the study of magnetic solids in very high magnetic fields. To perform these experiments in pulsed fields, we have developed a detection scheme for fully time resolved nuclear forward scattering applicable to other pump probe experiments.
Significance of High-frequency Electrical Brain Activity.
Kobayashi, Katsuhiro; Akiyama, Tomoyuki; Agari, Takashi; Sasaki, Tatsuya; Shibata, Takashi; Hanaoka, Yoshiyuki; Akiyama, Mari; Endoh, Fumika; Oka, Makio; Date, Isao
2017-06-01
Electroencephalogram (EEG) data include broadband electrical brain activity ranging from infra-slow bands (frequency bands (e.g., the approx. 10 Hz alpha rhythm) to high-frequency bands of up to 500 Hz. High-frequency oscillations (HFOs) including ripple and fast ripple oscillations (80-200 Hz and>200 / 250 Hz, respectively) are particularly of note due to their very close relationship to epileptogenicity, with the possibility that they could function as a surrogate biomarker of epileptogenicity. In contrast, physiological high-frequency activity plays an important role in higher brain functions, and the differentiation between pathological / epileptic and physiological HFOs is a critical issue, especially in epilepsy surgery. HFOs were initially recorded with intracranial electrodes in patients with intractable epilepsy as part of a long-term invasive seizure monitoring study. However, fast oscillations (FOs) in the ripple and gamma bands (40-80 Hz) are now noninvasively detected by scalp EEG and magnetoencephalography, and thus the scope of studies on HFOs /FOs is rapidly expanding.
Occupational hearing loss: tonal audiometry X high frequencies audiometry
Directory of Open Access Journals (Sweden)
Lauris, José Roberto Pereira
2009-09-01
Full Text Available Introduction: Studies on the occupational exposure show that noise has been reaching a large part of the working population around the world, and NIHL (noise-induced hearing loss is the second most frequent disease of the hearing system. Objective: To review the audiometry results of employees at the campus of the University of São Paulo, Bauru. Method: 40 audiometry results were analyzed between 2007 and 2008, whose ages comprised between 32 and 59 years, of both sexes and several professions: gardeners, maintenance technicians, drivers etc. The participants were divided into 2 groups: those with tonal thresholds within acceptable thresholds and those who presented auditory thresholds alterations, that is tonal thresholds below 25 dB (NA in any frequency (Administrative Rule no. 19 of the Ministry of Labor 1998. In addition to the Conventional Audiologic Evaluation (250Hz to 8.000Hz we also carried out High Frequencies Audiometry (9000Hz, 10000Hz, 11200Hz, 12500Hz, 14000Hz and 16000Hz. Results: According to the classification proposed by FIORINI (1994, 25.0% (N=10 they presented with NIHL suggestive audiometric configurations. The results of high frequencies Audiometry confirmed worse thresholds than those obtained in the conventional audiometry in the 2 groups evaluated. Conclusion: The use of high frequencies audiometry proved to be an important register as a hearing alteration early detection method.
Advances in high frequency ultrasound separation of particulates from biomass.
Juliano, Pablo; Augustin, Mary Ann; Xu, Xin-Qing; Mawson, Raymond; Knoerzer, Kai
2017-03-01
In recent years the use of high frequency ultrasound standing waves (megasonics) for droplet or cell separation from biomass has emerged beyond the microfluidics scale into the litre to industrial scale applications. The principle for this separation technology relies on the differential positioning of individual droplets or particles across an ultrasonic standing wave field within the reactor and subsequent biomass material predisposition for separation via rapid droplet agglomeration or coalescence into larger entities. Large scale transducers have been characterised with sonochemiluminescence and hydrophones to enable better reactor designs. High frequency enhanced separation technology has been demonstrated at industrial scale for oil recovery in the palm oil industry and at litre scale to assist olive oil, coconut oil and milk fat separation. Other applications include algal cell dewatering and milk fat globule fractionation. Frequency selection depends on the material properties and structure in the biomass mixture. Higher frequencies (1 and 2MHz) have proven preferable for better separation of materials with smaller sized droplets such as milk fat globules. For palm oil and olive oil, separation has been demonstrated within the 400-600kHz region, which has high radical production, without detectable impact on product quality. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.
Regenerator Operation at Very High Frequencies for Microcryocoolers
Radebaugh, Ray; O'Gallagher, Agnes
2006-04-01
The size of Stirling and Stirling-type pulse tube cryocoolers is dominated by the size of the pressure oscillator. Such cryocoolers typically operate at frequencies up to about 60 Hz for cold-end temperatures above about 60 K. Higher operating frequencies would allow the size and mass of the pressure oscillator to be reduced for a given power input. However, simply increasing the operating frequency leads to large losses in the regenerator. The simple analytical equations derived here show how the right combination of frequency and pressure, along with optimized regenerator geometry, can lead to successful regenerator operation at frequencies up to 1 kHz. Efficient regenerator operation at such high frequencies is possible only with pressures of about 5 to 8 MPa and with very small hydraulic diameters and lengths. Other geometrical parameters must also be optimized for such conditions. The analytical equations are used to provide guidance to the right combination of parameters. We give example numerical calculations with REGEN3.2 in the paper for 60 Hz, 400 Hz, and 1000 Hz operation of optimized screen regenerators and show that the coefficient of performance at 400 Hz and 1000 Hz is about 78 % and 68 %, respectively, of that for 60 Hz when an average pressure of 7 MPa is used with the higher frequency, compared with 2.5 MPa for 60 Hz operation. The 1000 Hz coefficient of performance for parallel tubes is about the same as that of the screen geometry at 60 Hz. The compressor and cold-end swept volumes are reduced by a factor of 47 at 1000 Hz, compared with the 60 Hz case for the same input acoustic power, which can enable the development of microcryocoolers for MEMS applications.
Recent Improvements in High-Frequency Eddy Current Conductivity Spectroscopy
Abu-Nabah, Bassam A.; Nagy, Peter B.
2008-02-01
Due to its frequency-dependent penetration depth, eddy current measurements are capable of mapping near-surface residual stress profiles based on the so-called piezoresistivity effect, i.e., the stress-dependence of electric conductivity. To capture the peak compressive residual stress in moderately shot-peened (Almen 4-8A) nickel-base superalloys, the eddy current inspection frequency has to go as high as 50-80 MHz. Recently, we have reported the development of a new high-frequency eddy current conductivity measuring system that offers an extended inspection frequency range up to 80 MHz. Unfortunately, spurious self- and stray-capacitance effects render the complex coil impedance variation with lift-off more nonlinear as the frequency increases, which makes it difficult to achieve accurate apparent eddy current conductivity (AECC) measurements with the standard four-point linear interpolation method beyond 25 MHz. In this paper, we will demonstrate that reducing the coil size reduces its sensitivity to capacitive lift-off variations, which is just the opposite of the better known inductive lift-off effect. Although reducing the coil size also reduces its absolute electric impedance and relative sensitivity to conductivity variations, a smaller coil still yields better overall performance for residual stress assessment. In addition, we will demonstrate the benefits of a semi-quadratic interpolation scheme that, together with the reduced lift-off sensitivity of the smaller probe coil, minimizes and in some cases completely eliminates the sensitivity of AECC measurements to lift-off uncertainties. These modifications allow us to do much more robust measurements up to as high as 80-100 MHz with the required high relative accuracy of +/-0.1%.
High frequency acoustic microscopy with Fresnel zoom lens
Institute of Scientific and Technical Information of China (English)
QIAO DongHai; LI ShunZhou; WANG ChengHao
2007-01-01
The acoustic field distributions and the convergent beams generated by the planar-structure Fresnel zone transducers on solid surface are investigated.Because only 0 and 180 degree phase transducers are used,an imaging system with the Fresnel zoom lens could work at very high frequency,which overcomes the frequency limit of the traditional phased array acoustic imaging system.Simulation results are given to illustrate the acoustic field distributions along the focal axis and the whole plane as well.Based on the principle of scanning of the focus with the change of frequency for the excited signal,an experimental imaging system is also built.Acoustic Fresnel zone transducers are fabricated at center frequency of 400 MHz.Measurements and detections of the known hole flaws at different depths of the fused quartz sample are presented to show that the imaging system with Fresnel zoom lens could move its focus by only changing the frequency of the excited signal.
Energy Technology Data Exchange (ETDEWEB)
Basanta Singh, N., E-mail: basanta_n@rediffmail.co [Department of Electronics and Communication Engineering, Manipur Institute of Technology, Imphal 795 004 (India); Deb, Sanjoy, E-mail: deb_sanjoy@yahoo.co [Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata 700 032 (India); Sarkar, Subir Kumar, E-mail: su_sircir@yahoo.co.i [Department of Electronics and Telecommunication Engineering, Jadavpur University, Kolkata 700 032 (India)
2009-11-01
The effect of electronic-state modulation on the high frequency response of GaAs quantum well with thin inserted barrier layer is studied. The carrier scattering by polar optic phonons, acoustic deformation potential and background ionized impurities are incorporated in the present calculations considering the carrier distribution to be heated drifted Fermi-Dirac distribution. Modified phonon spectra and modulated electron wave function give different values of form factor compared to bulk mode phonon. Mobility is found to be enhanced on insertion of thin layer inside the quantum well. The ac mobility and the phase lag increases with the increase in both the channel width and the 2D carrier concentration. Cutoff frequency, where ac mobility drops down to 0.707 of its low frequency value, is observed to be enhanced reflecting better high frequency response.
Factors controlling high-frequency radiation from extended ruptures
Beresnev, Igor A.
2017-09-01
Small-scale slip heterogeneity or variations in rupture velocity on the fault plane are often invoked to explain the high-frequency radiation from earthquakes. This view has no theoretical basis, which follows, for example, from the representation integral of elasticity, an exact solution for the radiated wave field. The Fourier transform, applied to the integral, shows that the seismic spectrum is fully controlled by that of the source time function, while the distribution of final slip and rupture acceleration/deceleration only contribute to directivity. This inference is corroborated by the precise numerical computation of the full radiated field from the representation integral. We compare calculated radiation from four finite-fault models: (1) uniform slip function with low slip velocity, (2) slip function spatially modulated by a sinusoidal function, (3) slip function spatially modulated by a sinusoidal function with random roughness added, and (4) uniform slip function with high slip velocity. The addition of "asperities," both regular and irregular, does not cause any systematic increase in the spectral level of high-frequency radiation, except for the creation of maxima due to constructive interference. On the other hand, an increase in the maximum rate of slip on the fault leads to highly amplified high frequencies, in accordance with the prediction on the basis of a simple point-source treatment of the fault. Hence, computations show that the temporal rate of slip, not the spatial heterogeneity on faults, is the predominant factor forming the high-frequency radiation and thus controlling the velocity and acceleration of the resulting ground motions.
Luthy, Sarah K; Marinkovic, Aleksandar; Weiner, Daniel J
2011-06-01
High-frequency chest compression (HFCC) is a therapy for cystic fibrosis (CF). We hypothesized that the resonant frequency (f(res)), as measured by impulse oscillometry, could be used to determine what HFCC vest settings produce maximal airflow or volume in pediatric CF patients. In 45 subjects, we studied: f(res), HFCC vest frequencies that subjects used (f(used)), and the HFCC vest frequencies that generated the greatest volume (f(vol)) and airflow (f(flow)) changes as measured by pneumotachometer. Median f(used) for 32 subjects was 14 Hz (range, 6-30). The rank order of the three most common f(used) was 15 Hz (28%) and 12 Hz (21%); three frequencies tied for third: 10, 11, and 14 Hz (5% each). Median f(res) for 43 subjects was 20.30 Hz (range, 7.85-33.65). Nineteen subjects underwent vest-tuning to determine f(vol) and f(flow). Median f(vol) was 8 Hz (range, 6-30). The rank order of the three most common f(vol) was: 8 Hz (42%), 6 Hz (32%), and 10 Hz (21%). Median f(flow) was 26 Hz (range, 8-30). The rank order of the three most common f(flow) was: 30 Hz (26%) and 28 Hz (21%); three frequencies tied for third: 8, 14, and 18 Hz (11% each). There was no correlation between f(used) and f(flow) (r(2) = -0.12) or f(vol) (r(2) = 0.031). There was no correlation between f(res) and f(flow) (r(2) = 0.19) or f(vol) (r(2) = 0.023). Multivariable analysis showed no independent variables were predictive of f(flow) or f(vol). Vest-tuning may be required to optimize clinical utility of HFCC. Multiple HFCC frequencies may need to be used to incorporate f(flow) and f(vol).
Collective Thomson scattering of a high power electron cyclotron resonance heating beam in LHD
DEFF Research Database (Denmark)
Kubo, S.; Nishiura, M.; Tanaka, K.
2010-01-01
Collective Thomson scattering (CTS) system has been constructed at LHD making use of the high power ECRH system in LHD. The necessary features for CTS, high power probing beams and receiving beams, both with well defined Gaussian profile and with the fine controllability, are endowed in the ECRH...
The spectra of molecular light scattering in high-viscosity glycerol-like liquids
Lishchuk, Sergey; Malomuzh, N. P.
1996-01-01
The mechanisms of formation of fine structures in the spectra of the polarized and depolarized components of molecular light scattering in high-viscosity liquids are studied. The temperature dependences of spectral parameters are examined. The results are treated in terms of the concept of a microheterogeneous structure of supercooled high-viscosity liquids.
Collective Thomson scattering system for determination of ion properties in a high flux plasma beam
van der Meiden, H. J.; Vernimmen, J. W. M.; Bystrov, K.; Jesko, K.; Kantor, M. Y.; De Temmerman, G.; Morgan, T. W.
2016-01-01
A collective Thomson scattering system has been developed for measuring ion temperature, plasma velocity and impurity concentration in the high density magnetized Magnum-PSI plasma beam, allowing for measurements at low temperature (<5 eV) and high electron density >4 × 1020 m−3, while
Analysis of. pi. /sup -/p. -->. etan scattering at high energies
Energy Technology Data Exchange (ETDEWEB)
Saleem, M.; Fazal-e-Aleem, %.F.
1981-11-01
The differential cross sections for ..pi../sup -/p..-->..etan including the most recent measurements at high energies and up to -tapprox. =5 (GeV/c)/sup 2/ are fitted by using a Regge pole+cut model. It is also shown that the results obtained at Fermilab and Serpukhov are not mutually consistent.
High-frequency signal generation using 1550 nm VCSEL subject to two-frequency optical injection
Consoli, Antonio; Quirce, Ana; Valle, Angel; Esquivias, Ignacio; Pesquera, Luis; García Tijero, Jose Manuel
2013-03-01
We experimentally investigate high-frequency microwave signal generation using a 1550 nm single-mode VCSEL subject to two-frequency optical injection. We first consider a situation in which the injected signals come from two similar VCSELs. The polarization of the injected light is parallel to that of the injected VCSEL. We obtain that the VCSEL can be locked to one of the injected signals, but the observed microwave signal is originated by beating at the photodetector. In a second situation we consider injected signals that come from two external cavity tunable lasers with a significant increase of the injected power with respect to the VCSEL-by-VCSEL injection case. The polarization of the injected light is orthogonal to that of the free-running slave VCSEL. We show that in this case it is possible to generate a microwave signal inside the VCSEL cavity.
Artificial ionospheric layers driven by high-frequency radiowaves: An assessment
Mishin, Evgeny; Watkins, Brenton; Lehtinen, Nikolai; Eliasson, Bengt; Pedersen, Todd; Grach, Savely
2016-04-01
High-power ordinary mode radio waves produce artificial ionization in the F region ionosphere at the European Incoherent Scatter (Tromsø, Norway) and High Frequency Active Auroral Research Program (Gakona, Alaska, USA) facilities. We have summarized the features of the excited plasma turbulence and descending layers of freshly ionized ("artificial") plasma. The concept of an ionizing wavefront created by accelerated suprathermal electrons appears to be in accordance with the data. The strong Langmuir turbulence (SLT) regime is revealed by the specific spectral features of incoherent radar backscatter and stimulated electromagnetic emissions. Theory predicts that the SLT acceleration is facilitated in the presence of photoelectrons. This agrees with the intensified artificial plasma production and the greater speeds of descent but weaker incoherent radar backscatter in the sunlit ionosphere. Numerical investigation of propagation of O-mode waves and the development of SLT and descending layers have been performed. The greater extent of the SLT region at the magnetic zenith than that at vertical appears to make magnetic zenith injections more efficient for electron acceleration and descending layers. At high powers, anomalous absorption is suppressed, leading to the Langmuir and upper hybrid processes during the whole heater on period. The data suggest that parametric upper hybrid interactions mitigate anomalous absorption at heating frequencies far from electron gyroharmonics and also generate SLT in the upper hybrid layer. The persistence of artificial plasma at the terminal altitude depends on how close the heating frequency is to the local gyroharmonic.
Design of a high frequency low voltage CMOS operational amplifier
Directory of Open Access Journals (Sweden)
Priyanka Kakoty
2011-03-01
Full Text Available A method is presented in this paper for the design of a high frequency CMOS operational amplifier (Op-Amp which operates at 3V power supply using tsmc 0.18 micron CMOS technology. The OPAMPdesigned is a two-stage CMOS OPAMP followed by an output buffer. This Operational Transconductance Amplifier (OTA employs a Miller capacitor and is compensated with a current buffer compensation technique. The unique behaviour of the MOS transistors in saturation region not only allows a designer to work at a low voltage, but also at a high frequency. Designing of two-stage op-ampsis a multi-dimensional-optimization problem where optimization of one or more parameters may easily result into degradation of others. The OPAMP is designed to exhibit a unity gain frequency of 2.02GHzand exhibits a gain of 49.02dB with a 60.50 phase margin. As compared to the conventional approach, the proposed compensation method results in a higher unity gain frequency under the same load condition.Design has been carried out in Tanner tools. Simulation results are verified using S-edit and W-edit.
Design of a high frequency low voltage CMOS operational amplifier
Directory of Open Access Journals (Sweden)
Priyanka Kakoty
2011-03-01
Full Text Available A method is presented in this paper for the design of a high frequency CMOS operational amplifier (Op-Amp which operates at 3V power supply using tsmc 0.18 micron CMOS technology. The OPAMPdesigned is a two-stage CMOS OPAMP followed by an output buffer. This OperationalTransconductance Amplifier (OTA employs a Miller capacitor and is compensated with a current buffercompensation technique. The unique behaviour of the MOS transistors in saturation region not onlyallows a designer to work at a low voltage, but also at a high frequency. Designing of two-stage op-ampsis a multi-dimensional-optimization problem where optimization of one or more parameters may easilyresult into degradation of others. The OPAMP is designed to exhibit a unity gain frequency of 2.02GHzand exhibits a gain of 49.02dB with a 60.50 phase margin. As compared to the conventional approach, theproposed compensation method results in a higher unity gain frequency under the same load condition.Design has been carried out in Tanner tools. Simulation results are verified using S-edit and W-edit.
Born approximation, scattering, and algorithm
Martinez, Alex; Hu, Mengqi; Gu, Haicheng; Qiao, Zhijun
2015-05-01
In the past few decades, there were many imaging algorithms designed in the case of the absence of multiple scattering. Recently, we discussed an algorithm for removing high order scattering components from collected data. This paper is a continuation of our previous work. First, we investigate the current state of multiple scattering in SAR. Then, we revise our method and test it. Given an estimate of our target reflectivity, we compute the multi scattering effects in the target region for various frequencies. Furthermore, we propagate this energy through free space towards our antenna, and remove it from the collected data.
Hadronic sizes and observables in high-energy scattering
Ferreira, E; Ferreira, Erasmo; Pereira, Flávio
1997-01-01
The functional dependence of the high-energy observables of total cross section and slope parameter on the sizes of the colliding hadrons predicted by the model of the stochastic vacuum and the corresponding relations used in the geometric model of Povh and Hüfner are confronted with the experimental data. The existence of a universal term in the expression for the slope, due purely to vacuum effects, independent of the energy and of the particular hadronic system, is investigated. Accounting for the two independent correlation functions of the QCD vacuum, we improve the simple and consistent description given by the model of the stochastic vacuum to the high-energy pp and pbar-p data, with a new determination of parameters of non-perturbative QCD. The increase of the hadronic radii with the energy accounts for the energy dependence of the observables.
Clinical Implications High Frequency Chest Wall Oscillation (HFCWO
Directory of Open Access Journals (Sweden)
Mantellini E.
2012-01-01
Full Text Available Purpose: patients with neuromuscular diseases presents an high incidence of respiratory infections favoured by stagnation of deep bronchial secretions and deficit of cough. The aim of the study is to evaluate the correct treatment of this condition and the role of High Frequency Chest Wall Oscillation (HFCWO in helping the removal of bronchial secretions and reduce the incidence of infections in patients with neuromuscular disease.Methods: analysis of the current bibliography related to respiratory infections and neuromuscular disease. PCEF (Peak Cough Expiratory Flow is used as a standardized indicator of efficiency of cough.Results: the High Frequency Chest Wall Oscillation (HFCWO is useful, in cases of increased production of mucus and impairment of muco-ciliary clearance, to remove the tracheobronchial secretions and reduce the incidence of infections.Conclusions: the correct approach to patients with neuromuscular disease and frequent respiratory infections is focused on treatment of cough ineffective and management of bronchial secretions. High Frequency Chest Wall Oscillation (HFCWO (VEST has a central role in treatment of cough ineffective and management of bronchial secretions reducing respiratory infections.
High frequency modeling of power transformers. Stresses and diagnostics
Energy Technology Data Exchange (ETDEWEB)
Bjerkan, Eilert
2005-05-15
In this thesis a reliable, versatile and rigorous method for high frequency power transformer modeling is searched and established. The purpose is to apply this model to sensitivity analysis of FRA (Frequency Response Analysis) which is a quite new diagnostic method for assessing the mechanical integrity of power transformer windings on-site. The method should be versatile in terms of being able to estimate internal and external over voltages and resonances. Another important aspect is that the method chosen is suitable for real transformer geometries. In order to verify the suitability of the model for real transformers, a specific test-object is used. This is a 20MVA transformer, and details are given in chapter 1.4. The high frequency power transformer model is established from geometrical and constructional information from the manufacturer, together with available material characteristics. All circuit parameters in the lumped circuit representation are calculated based on these data. No empirical modifications need to be performed. Comparison shows capability of reasonable accuracy in the range from 10 khz to 1 MHz utilizing a disc-to-disc representation. A compromise between accuracy of model due to discretization and complexity of the model in a turn-to-turn representation is inevitable. The importance of the iron core is emphasized through a comparison of representations with/without the core included. Frequency-dependent phenomena are accurately represented using an isotropic equivalent for windings and core, even with a coarse mesh for the FEM-model. This is achieved through a frequency-dependent complex permeability representation of the materials. This permeability is deduced from an analytical solution of the frequency-dependent magnetic field inside the conductors and the core. The importance of dielectric losses in a transformer model is also assessed. Since published data on the high frequency properties of press board are limited, some initial
High-pressure Brillouin scattering in a simple molecular system
Shimizu, H
2002-01-01
Recent developments in high-pressure in situ Brillouin spectroscopy of a simple molecular system are reviewed by demonstrating experimental and analytical methods for the study of acoustic velocities in any direction, adiabatic elastic constants, and elastic anisotropy. Detailed applications to solid argon (Ar) are presented, at pressures up to 70 GPa in a diamond anvil cell, using recently developed approaches that combine the method of in situ Brillouin spectroscopy, for a single crystal of Ar up to 4 GPa, and the envelope method applied to both longitudinal acoustic and transverse acoustic modes, for recrystallized Ar between 4 and 70 GPa.
How high frequency trading affects a market index.
Kenett, Dror Y; Ben-Jacob, Eshel; Stanley, H Eugene; Gur-Gershgoren, Gitit
2013-01-01
The relationship between a market index and its constituent stocks is complicated. While an index is a weighted average of its constituent stocks, when the investigated time scale is one day or longer the index has been found to have a stronger effect on the stocks than vice versa. We explore how this interaction changes in short time scales using high frequency data. Using a correlation-based analysis approach, we find that in short time scales stocks have a stronger influence on the index. These findings have implications for high frequency trading and suggest that the price of an index should be published on shorter time scales, as close as possible to those of the actual transaction time scale.
Skyrmion-based high-frequency signal generator
Luo, Shijiang; Zhang, Yue; Shen, Maokang; Ou-Yang, Jun; Yan, Baiqian; Yang, Xiaofei; Chen, Shi; Zhu, Benpeng; You, Long
2017-03-01
Many concepts for skyrmion-based devices have been proposed, and most of their possible applications are based on the motion of skyrmions driven by a dc current in an area with a constricted geometry. However, skyrmion motion driven by a pulsed current has not been investigated so far. In this work, we propose a skyrmion-based high-frequency signal generator based on the pulsed-current-driven circular motion of skyrmions in a square-shaped film by micromagnetic simulation. The results indicate that skyrmions can move in a closed curve with central symmetry. The trajectory and cycle period can be adjusted by tuning the size of the film, the current density, the Dzyaloshinskii-Moriya interaction constant, and the local in-plane magnetic anisotropy. The period can be tuned from several nanoseconds to tens of nanoseconds, which offers the possibility to prepare high-frequency signal generator based on skyrmions.