WorldWideScience

Sample records for high explosives applications

  1. High Voltage Application of Explosively Formed Fuses

    Energy Technology Data Exchange (ETDEWEB)

    Tasker, D.G.; Goforth, J.H.; Fowler, C.M.; Lopez, E.M.; Oona, H.; Marsh, S.P.; King, J.C.; Herrera, D.H.; Torres, D.T.; Sena, F.C.; Martinez, E.C.; Reinovsky, R.E.; Stokes, J.L.; Tabaka, L.J.; Kiuttu, G.; Degnan, J.

    1998-10-18

    At Los Alamos, the authors have primarily applied Explosively Formed Fuse (EFF) techniques to high current systems. In these systems, the EFF has interrupted currents from 19 to 25 MA, thus diverting the current to low inductance loads. The magnitude of transferred current is determined by the ratio of storage inductance to load inductance, and with dynamic loads, the current has ranged from 12 to 20 MA. In a system with 18 MJ stored energy, the switch operates at a power up to 6 TW. The authors are now investigating the use of the EFF technique to apply high voltages to high impedance loads in systems that are more compact. In these systems, they are exploring circuits with EFF lengths from 43 to 100 cm, which have storage inductances large enough to apply 300 to 500 kV across high impedance loads. Experimental results and design considerations are presented. Using cylindrical EFF switches of 10 cm diameter and 43 cm length, currents of approximately 3 MA were interrupted producing {approximately}200 kV. This indicate s the switch had an effective resistance of {approximately}100 m{Omega} where 150--200 m{Omega} was expected. To understand the lower performance, several parameters were studied, including: electrical conduction through the explosive products; current density; explosive initiation; insulator type; conductor thickness; and so on. The results show a number of interesting features, most notably that the primary mechanism of switch operation is mechanical and not electrical fusing of the conductor. Switches opening on a 10 to 10 {micro}s time scale with resistances starting at 50 {micro}{Omega} and increasing to perhaps 1 {Omega} now seem possible to construct, using explosive charges as small as a few pounds.

  2. Melt Cast High Explosives

    Directory of Open Access Journals (Sweden)

    Stanisław Cudziło

    2014-12-01

    Full Text Available [b]Abstract[/b]. This paper reviews the current state and future developments of melt-cast high explosives. First the compositions, properties and methods of preparation of trinitrotoluene based (TNT conventional mixtures with aluminum, hexogen (RDX or octogen (HMX are described. In the newer, less sensitive explosive formulations, TNT is replaced with dinitroanisole (DNANDNANDNAN and nitrotriazolone (NTONTONTO, nitroguanidine (NG or ammonium perchlorate (AP are the replacement for RDRDX and HMX. Plasticized wax or polymer-based binder systems for melt castable explosives are also included. Hydroxyl terminated polybutadiene (HPTB is the binder of choice, but polyethylene glycol, and polycaprolactone with energetic plasticizers are also used. The most advanced melt-cast explosives are compositions containing energetic thermoplastic elastomers and novel highly energetic compounds (including nitrogen rich molecules in whose particles are nanosized and practically defect-less.[b]Keywords[/b]: melt-cast explosives, detonation parameters

  3. Application of neutron generators for high explosives, toxic agents and fissile material detection.

    Science.gov (United States)

    Aleksandrov, V D; Bogolubov, E P; Bochkarev, O V; Korytko, L A; Nazarov, V I; Polkanov, Yu G; Ryzhkov, V I; Khasaev, T O

    2005-01-01

    The portable pulsed neutron generators developed and designed by VNIIA are presented. The neutron methods are good tools for non-destructive assay of dangerous materials. The samples of various systems for the detection of high explosives in luggage, identification of toxic agents in chemical munitions, and also for the prevention of illicit trafficking of fissile elements in passengers' luggage are discussed.

  4. The Xsense project: The application of an intelligent sensor array for high sensitivity handheld explosives detectors

    DEFF Research Database (Denmark)

    Kostesha, Natalie; Schmidt, Michael Stenbæk; Bosco, Filippo

    2011-01-01

    Multiple independent sensors are used in security and military applications in order to increase sensitivity, selectivity and data reliability. The Xsense project has been initiated at the Technical University of Denmark in collaboration with a number of partners in an effort to produce a handheld...... sensor for trace detection of explosives. We are using micro- and nano technological approaches for integrating four sensing principles into a single device. At the end of the project, the consortium aims at having delivered a sensor platform consisting of four independent detector principles capable...

  5. Introduction to High Explosives Science

    Energy Technology Data Exchange (ETDEWEB)

    Skidmore, Cary Bradford [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Preston, Daniel N. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-11-17

    These are a set of slides for educational outreach to children on high explosives science. It gives an introduction to the elements involved in this science: carbon, hydrogen, nitrogen, and oxygen. Combined, these form the molecule HMX. Many pictures are also included to illustrate explosions.

  6. Highly explosive nanosilicon-based composite materials

    Energy Technology Data Exchange (ETDEWEB)

    Clement, D.; Diener, J.; Gross, E.; Kuenzner, N.; Kovalev, D. [Technical University of Munich, Physics Department, James-Franck-Str., 85747 Garching (Germany); Timoshenko, V.Yu. [Moscow State M.V. Lomonosov University, Physics Department, 119899 Moscow (Russian Federation)

    2005-06-01

    We present a highly explosive binary system based on porous silicon layers with their pores filled with solid oxidizers. The porous layers are produced by a standard electrochemical etching process and exhibit properties that are different from other energetic materials. Its production is completely compatible with the standard silicon technology and full bulk silicon wafers can be processed and therefore a large number of explosive elements can be produced simultaneously. The application-relevant parameters: the efficiency and the long-term stability of various porous silicon/oxidizer systems have been studied in details. Structural properties of porous silicon, its surface termination, the atomic ratio of silicon to oxygen and the chosen oxidizers were optimized to achieve the highest efficiency of the explosive reaction. This explosive system reveals various possible applications in different industrial fields, e.g. as a novel, very fast airbag igniter. (copyright 2005 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  7. Recent Advances in the Synthesis of High Explosive Materials

    Directory of Open Access Journals (Sweden)

    Jesse J. Sabatini

    2015-12-01

    Full Text Available This review discusses the recent advances in the syntheses of high explosive energetic materials. Syntheses of some relevant modern primary explosives and secondary high explosives, and the sensitivities and properties of these molecules are provided. In addition to the synthesis of such materials, processing improvement and formulating aspects using these ingredients, where applicable, are discussed in detail.

  8. The application of single particle aerosol mass spectrometry for the detection and identification of high explosives and chemical warfare agents

    Energy Technology Data Exchange (ETDEWEB)

    Martin, Audrey Noreen [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2006-01-01

    Single Particle Aerosol Mass Spectrometry (SPAMS) was evaluated as a real-time detection technique for single particles of high explosives. Dual-polarity time-of-flight mass spectra were obtained for samples of 2,4,6-trinitrotoluene (TNT), 1,3,5-trinitro-1,3,5-triazinane (RDX), and pentaerythritol tetranitrate (PETN); peaks indicative of each compound were identified. Composite explosives, Comp B, Semtex 1A, and Semtex 1H were also analyzed, and peaks due to the explosive components of each sample were present in each spectrum. Mass spectral variability with laser fluence is discussed. The ability of the SPAMS system to identify explosive components in a single complex explosive particle (~1 pg) without the need for consumables is demonstrated. SPAMS was also applied to the detection of Chemical Warfare Agent (CWA) simulants in the liquid and vapor phases. Liquid simulants for sarin, cyclosarin, tabun, and VX were analyzed; peaks indicative of each simulant were identified. Vapor phase CWA simulants were adsorbed onto alumina, silica, Zeolite, activated carbon, and metal powders which were directly analyzed using SPAMS. The use of metal powders as adsorbent materials was especially useful in the analysis of triethyl phosphate (TEP), a VX stimulant, which was undetectable using SPAMS in the liquid phase. The capability of SPAMS to detect high explosives and CWA simulants using one set of operational conditions is established.

  9. High temperature two component explosive

    Science.gov (United States)

    Mars, James E.; Poole, Donald R.; Schmidt, Eckart W.; Wang, Charles

    1981-01-01

    A two component, high temperature, thermally stable explosive composition comprises a liquid or low melting oxidizer and a liquid or low melting organic fuel. The oxidizer and fuel in admixture are incapable of substantial spontaneous exothermic reaction at temperatures on the order of 475.degree. K. At temperatures on the order of 475.degree. K., the oxidizer and fuel in admixture have an activation energy of at least about 40 kcal/mol. As a result of the high activation energy, the preferred explosive compositions are nondetonable as solids at ambient temperature, and become detonable only when heated beyond the melting point. Preferable oxidizers are selected from alkali or alkaline earth metal nitrates, nitrites, perchlorates, and/or mixtures thereof. Preferred fuels are organic compounds having polar hydrophilic groups. The most preferred fuels are guanidinium nitrate, acetamide and mixtures of the two. Most preferred oxidizers are eutectic mixtures of lithium nitrate, potassium nitrate and sodium nitrate, of sodium nitrite, sodium nitrate and potassium nitrate, and of potassium nitrate, calcium nitrate and sodium nitrate.

  10. NEW GUN CAPABILITY WITH INTERCHANGABLE BARRELS TO INVESTIGATE LOW VELOCITY IMPACT REGIMES AT THE LAWRENCE LIVERMORE NATIONAL LABORATORY HIGH EXPLOSIVES APPLICATIONS FACILITY

    Energy Technology Data Exchange (ETDEWEB)

    Vandersall, K S; Behn, A; Gresshoff, M; Jr., L F; Chiao, P I

    2009-09-16

    A new gas gun capability is being activated at Lawrence Livermore National Laboratories located in the High Explosives Applications Facility (HEAF). The single stage light gas (dry air, nitrogen, or helium) gun has interchangeable barrels ranging from 25.4 mm to 76.2 mm in diameter with 1.8 meters in length and is being fabricated by Physics Applications, Inc. Because it is being used for safety studies involving explosives, the gun is planned for operation inside a large enclosed firing tank, with typical velocities planned in the range of 10-300 m/s. Three applications planned for this gun include: low velocity impact of detonator or detonator/booster assemblies with various projectile shapes, the Steven Impact test that involves impact initiation of a cased explosive target, and the Taylor impact test using a cylindrical explosive sample impacted onto a rigid anvil for fracture studies of energetic materials. A highlight of the gun features, outline on work in progress for implementing this capability, and discussion of the planned areas of research will be included.

  11. High Explosives Research and Development (HERD) Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The purpose is to provide high explosive formulation, chemical analysis, safety and performance testing, processing, X-ray, quality control and loading support for...

  12. Metal explosion chambers: designing, manufacturing, application

    Science.gov (United States)

    Stoyanovskii, O. I.; Zlobin, B. S.; Shtertser, A. A.; Meshcheryakov, Y. P.

    2017-10-01

    Designing of explosion chambers is based on research investigations of the chamber body stress-strain state, which is determined by numerical computation and experimentally by the strain gage technique. Studies show that chamber bottoms are the most loaded elements, and maximal stresses arise in chamber poles. Increasing the shell thickness around poles by welding-in an insert is a simple and saving way to solve this problem. There are structural solutions, enabling reliable hermetic closure and preventing leakage of detonation products from the chamber. Explosion chambers are employed in scientific research and in different industrial applications: explosive welding and hardening, synthesis of new materials, disposal of expired ammunition, and etc.

  13. Characterization of mock high-explosive powder

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, C.R.; Dorsey, G.F.

    1979-03-01

    Analytical characterization and explosibility tests were made on a simulative high-explosive powder consisting of cyanuric acid, melamine, nitrocellulose, and tris-(..beta..-chloroethyl)-phosphate. Tests indicated that the powder presents no unusual safety or health hazards in isostatic-pressing and dry-machining operations.

  14. X-Ray Visualisation Of High Speed Phenomena: Application To The Behavior Of Materials Under High Explosives Loading

    Science.gov (United States)

    Hauducoeur, A.; Fischer, D.; Guix, R.

    1983-08-01

    Flash Radiography and Cineradiography allow the visualisation of high speed phenomena and the stop motion effect with recording on film of qualitative and quantitative data on the dynamic state of the matter under very intense shock waves. In this paper, we present a set of experimental devices and results obtained with a large range of flash X-ray generators : - small generators made with Marx discharge circuits coupled to void X-ray tubes, working up to 2.5 MV, - a big flash machine, GREC (presented at this conference (ref.1))used with very absor-bing materials. The presented applications illustrate a large field of experiments in the field of shock waves, interaction of 2 shock or detonation waves, flow visualisation of detonation, Taylor instabilities/metal jetting, spalling in iron...

  15. Electric conductivity of high explosives with carbon nanotubes

    Science.gov (United States)

    Rubtsov, I. A.; Pruuel, E. R.; Ten, K. A.; Kashkarov, A. O.; Kremenko, S. I.

    2017-09-01

    The paper presents a technique for introducing carbon nanotubes into high explosives (HEs). For a number of explosives (trinitrotoluene, pentaerythritol tetranitrate, benzotrifuroxan), it was possible to achieve the appearance of conductivity by adding a small amount (up to 1% by mass) of single-walled carbon nanotubes TUBALL COATE H2O (CNTs) produced by OCSiAl. Thus it is possible to reduce the sensitivity of explosives to static electricity by adding an insignificant part of conductive nanotubes. This will increase safety of HEs during production and application and will reduce the number of accidents.

  16. On the Violence of High Explosive Reactions

    Energy Technology Data Exchange (ETDEWEB)

    Tarver, C M; Chidester, S K

    2004-02-09

    High explosive reactions can be caused by three general energy deposition processes: impact ignition by frictional and/or shear heating; bulk thermal heating; and shock compression. The violence of the subsequent reaction varies from benign slow combustion to catastrophic detonation of the entire charge. The degree of violence depends on many variables, including the rate of energy delivery, the physical and chemical properties of the explosive, and the strength of the confinement surrounding the explosive charge. The current state of experimental and computer modeling research on the violence of impact, thermal, and shock-induced reactions is reviewed.

  17. Criticality safety in high explosives dissolution

    Energy Technology Data Exchange (ETDEWEB)

    Troyer, S.D.

    1997-06-01

    In 1992, an incident occurred at the Pantex Plant in which the cladding around a fissile material component (pit) cracked during dismantlement of the high explosives portion of a nuclear weapon. Although the event did not result in any significant contamination or personnel exposures, concerns about the incident led to the conclusion that the current dismantlement process was unacceptable. Options considered for redesign, dissolution tooling design considerations, dissolution tooling design features, and the analysis of the new dissolution tooling are summarized. The final tooling design developed incorporated a number of safety features and provides a simple, self-contained, low-maintenance method of high explosives removal for nuclear explosive dismantlement. Analyses demonstrate that the tooling design will remain subcritical under normal, abnormal, and credible accident scenarios. 1 fig.

  18. Securing Infrastructure from High Explosive Threats

    Energy Technology Data Exchange (ETDEWEB)

    Glascoe, L; Noble, C; Reynolds, J; Kuhl, A; Morris, J

    2009-03-20

    Lawrence Livermore National Laboratory (LLNL) is working with the Department of Homeland Security's Science and Technology Directorate, the Transportation Security Administration, and several infrastructure partners to characterize and help mitigate principal structural vulnerabilities to explosive threats. Given the importance of infrastructure to the nation's security and economy, there is a clear need for applied research and analyses (1) to improve understanding of the vulnerabilities of these systems to explosive threats and (2) to provide decision makers with time-critical technical assistance concerning countermeasure and mitigation options. Fully-coupled high performance calculations of structural response to ideal and non-ideal explosives help bound and quantify specific critical vulnerabilities, and help identify possible corrective schemes. Experimental validation of modeling approaches and methodologies builds confidence in the prediction, while advanced stochastic techniques allow for optimal use of scarce computational resources to efficiently provide infrastructure owners and decision makers with timely analyses.

  19. Motivation for a High Explosive Testing Program in South Africa

    Science.gov (United States)

    2015-12-04

    1~7JJ!i 5a. DATE: 6a. DATE: 7a. DATE: 8. TITLE: Motivation for a High Explosive Testing Program in South Africa 9. CONTRACT NUMBER: 10...00-00-2015 4. TITLE AND SUBTITLE Motivation for a High Explosive Testing Program in South Africa 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM...600 Raleigh, NC 27605 Contract Number: HDTRA2-11-D-0001 Motivation for a High Explosive Testing Program in South Africa 4

  20. Expediency of application of explosion-relief constructions to ensure explosion resistance of production buildings

    Directory of Open Access Journals (Sweden)

    Lyapin Anton

    2016-01-01

    Full Text Available The article presents a model of economic evaluation and selection of explosion-relief constructions (ERC, as well as determination of explosion protection efficiency of buildings and structures provided on a stage of construction. It has been shown that definition of economic efficiency of ERС is the evaluation of its application for buildings with remote or automatically controlled production. It has been determined that an important role in design of explosive industrial facilities is played by selection of the economically feasible and effective materials for ERC. When selecting materials it is necessary to consider probability and yield of explosions. Necessity to create the methods allow considering such probability has been revealed.

  1. Multistage reaction pathways in detonating high explosives

    Energy Technology Data Exchange (ETDEWEB)

    Li, Ying [Collaboratory for Advanced Computing and Simulations, Department of Physics and Astronomy, Department of Computer Science, and Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089-0242 (United States); Argonne Leadership Computing Facility, Argonne National Laboratory, Argonne, Illinois 60439 (United States); Kalia, Rajiv K.; Nakano, Aiichiro; Nomura, Ken-ichi; Vashishta, Priya [Collaboratory for Advanced Computing and Simulations, Department of Physics and Astronomy, Department of Computer Science, and Department of Chemical Engineering and Materials Science, University of Southern California, Los Angeles, California 90089-0242 (United States)

    2014-11-17

    Atomistic mechanisms underlying the reaction time and intermediate reaction products of detonating high explosives far from equilibrium have been elusive. This is because detonation is one of the hardest multiscale physics problems, in which diverse length and time scales play important roles. Here, large spatiotemporal-scale reactive molecular dynamics simulations validated by quantum molecular dynamics simulations reveal a two-stage reaction mechanism during the detonation of cyclotrimethylenetrinitramine crystal. Rapid production of N{sub 2} and H{sub 2}O within ∼10 ps is followed by delayed production of CO molecules beyond ns. We found that further decomposition towards the final products is inhibited by the formation of large metastable carbon- and oxygen-rich clusters with fractal geometry. In addition, we found distinct unimolecular and intermolecular reaction pathways, respectively, for the rapid N{sub 2} and H{sub 2}O productions.

  2. Mesoscale modeling of metal-loaded high explosives

    Energy Technology Data Exchange (ETDEWEB)

    Bdzil, John Bohdan [Los Alamos National Laboratory; Lieberthal, Brandon [UNIV OF ILLINOIS; Srewart, Donald S [UNIV OF ILLINOIS

    2010-01-01

    We describe a 3D approach to modeling multi-phase blast explosive, which is primarily condensed explosive by volume with inert embedded particles. These embedded particles are uniform in size and placed on the array of a regular lattice. The asymptotic theory of detonation shock dynamics governs the detonation shock propagation in the explosive. Mesoscale hydrodynamic simulations are used to show how the particles are compressed, deformed, and accelerated by the high-speed detonation products flow.

  3. Color camera pyrometry for high explosive detonations

    Science.gov (United States)

    Densmore, John; Biss, Matthew; Homan, Barrie; McNesby, Kevin

    2011-06-01

    Temperature measurements of high-explosive and combustion processes are difficult because of the speed and environment of the events. We have characterized and calibrated a digital high-speed color camera that may be used as an optical pyrometer to overcome these challenges. The camera provides both high temporal and spatial resolution. The color filter array of the sensor uses three color filters to measure the spectral distribution of the imaged light. A two-color ratio method is used to calculate a temperature using the color filter array raw image data and a gray-body assumption. If the raw image data is not available, temperatures may be calculated from processed images or movies depending on proper analysis of the digital color imaging pipeline. We analyze three transformations within the pipeline (demosaicing, white balance, and gamma-correction) to determine their effect on the calculated temperature. Using this technique with a Vision Research Phantom color camera, we have measured the temperature of exploded C-4 charges. The surface temperature of the resulting fireball rapidly increases after detonation and then decayed to a constant value of approximately 1980 K. Processed images indicates that the temperature remains constant until the light intensity decreased below the background value.

  4. High explosive characterization for the dice throw event

    Energy Technology Data Exchange (ETDEWEB)

    Helm, F.; Finger, M.; Hayes, B.; Lee, E.; Cheung, H.; Walton, J.

    1976-06-16

    An equation of state for detonation products was developed to describe the detonation of large charges of ammonium nitrate/fuel oil (ANFO). The equation of state will be used to predict air-blast and ground-motion effects in the Dice Throw Event. The explosive performance of ANFO is highly dependent on charge size. The equation developed from this work is applicable to heavily confined detonations 101.6 mm in diameter or larger. The equation of state is based on results from experiments in cylinders and hemispheres, and a large field test. The report contains a detailed discussion of the diagnostic and initiation techniques used in these experiments.

  5. 40 CFR 457.10 - Applicability; description of the commercial manufacture of explosives subcategory.

    Science.gov (United States)

    2010-07-01

    ... commercial manufacture of explosives subcategory. 457.10 Section 457.10 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS EXPLOSIVES MANUFACTURING POINT SOURCE CATEGORY Manufacture of Explosives Subcategory § 457.10 Applicability; description of the...

  6. Explosive Detection in Aviation Applications Using CT

    Energy Technology Data Exchange (ETDEWEB)

    Martz, H E; Crawford, C R

    2011-02-15

    CT scanners are deployed world-wide to detect explosives in checked and carry-on baggage. Though very similar to single- and dual-energy multi-slice CT scanners used today in medical imaging, some recently developed explosives detection scanners employ multiple sources and detector arrays to eliminate mechanical rotation of a gantry, photon counting detectors for spectral imaging, and limited number of views to reduce cost. For each bag scanned, the resulting reconstructed images are first processed by automated threat recognition algorithms to screen for explosives and other threats. Human operators review the images only when these automated algorithms report the presence of possible threats. The US Department of Homeland Security (DHS) has requirements for future scanners that include dealing with a larger number of threats, higher probability of detection, lower false alarm rates and lower operating costs. One tactic that DHS is pursuing to achieve these requirements is to augment the capabilities of the established security vendors with third-party algorithm developers. A third-party in this context refers to academics and companies other than the established vendors. DHS is particularly interested in exploring the model that has been used very successfully by the medical imaging industry, in which university researchers develop algorithms that are eventually deployed in commercial medical imaging equipment. The purpose of this paper is to discuss opportunities for third-parties to develop advanced reconstruction and threat detection algorithms.

  7. Controlled Detonation Dynamics in Additively Manufactured High Explosives

    Science.gov (United States)

    Schmalzer, Andrew; Tappan, Bryce; Bowden, Patrick; Manner, Virginia; Clements, Brad; Menikoff, Ralph; Ionita, Axinte; Branch, Brittany; Dattelbaum, Dana; Espy, Michelle; Patterson, Brian; Wu, Ruilian; Mueller, Alexander

    2017-06-01

    The effect of structure in explosives has long been a subject of interest to explosives engineers and scientists. Through structure, detonation dynamics in explosives can be manipulated, introducing a new level of safety and directed performance into these previously difficult to control materials. New advances in additive manufacturing (AM) allow the deliberate introduction of exact internal structures at dimensions approaching the mesoscale of these energetic materials. We show through simulation and experiment that this structure can be used to control detonation behavior by manipulating complex shockwave interactions. We use high-speed video and shorting mag-wires to determine the detonation velocity in AM generated explosive structures, demonstrating, for the first time, a method of controlling the directional propagation of reactive flow through the controlled introduction of structure within a high explosive. With ongoing improvement in the AM methods available coupled with guidance through modeling and simulations, more complex interactions are being explored. LANL LDRD Office.

  8. Application of paper spray ionization for explosives analysis.

    Science.gov (United States)

    Tsai, Chia-Wei; Tipple, Christopher A; Yost, Richard A

    2017-10-15

    A desired feature in the analysis of explosives is to decrease the time of the entire analysis procedure, including sampling. A recently utilized ambient ionization technique, paper spray ionization (PSI), provides the possibility of combining sampling and ionization. However, an interesting phenomenon that occurs in generating negatively charged ions pose some challenges in applying PSI to explosives analysis. The goal of this work is to investigate the possible solutions for generating explosives ions in negative mode PSI. The analysis of 2,4,6-trinitrotoluene (TNT), pentaerythritol tetranitrate (PETN), octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine (HMX), and 1,3,5-trinitroperhydro-1,3,5-triazine (RDX) was performed. Several solvent systems with different surface tensions and additives were compared to determine their effect on the ionization of explosives. The solvents tested include tert-butanol, isopropanol, methanol, and acetonitrile. The additives tested were carbon tetrachloride and ammonium nitrate. Of the solvents tested, isopropanol yielded the best results. In addition, adding ammonium nitrate to the isopropanol enhanced the analyte signal. Experimentally determined limits of detection (LODs) as low as 0.06 ng for PETN, on paper, were observed with isopropanol and the addition of 0.4 mM ammonium nitrate as the spray solution. In addition, the explosive components of two plastic explosive samples, Composition 4 and Semtex, were successfully analyzed via surface sampling when using the developed method. The analysis of explosives using PSI-MS in negative ion mode was achieved. The addition of ammonium nitrate to isopropanol, in general, enhanced the analyte signal and yielded better ionization stability. Real-world explosive samples were analyzed, which demonstrates one of the potential applications of PSI-MS analysis. Copyright © 2017 John Wiley & Sons, Ltd.

  9. Explosion induced dynamic responses of blast wall on FPSO topside: Blast loading application methods

    Directory of Open Access Journals (Sweden)

    Ki-Yeob Kang

    2017-03-01

    Full Text Available Topside areas on an offshore oil and gas platform are highly susceptible to explosion. A blast wall on these areas plays an important role in preventing explosion damage and must withstand the expected explosion loads. The uniformly distributed loading condition, predicted by Explosion Risk Analyses (ERAs, has been applied in most of the previous analysis methods. However, analysis methods related to load conditions are inaccurate because the blast overpressure around the wall tends to be of low-level in the open area and high-level in the enclosed area. The main objectives of this paper are to study the effects of applying different load applications and compare the dynamic responses of the blast wall. To do so, various kinds of blast pressures were measured by Computational Fluid Dynamics (CFD simulations on the target area. Nonlinear finite element analyses of the blast wall under two types of identified dynamic loadings were also conducted.

  10. Light Initiated High Explosives (LIHE) Test Technique and Capabilities

    Science.gov (United States)

    Covert, Timothy

    2009-06-01

    The Light Initiated High Explosives (LIHE) test facility has been re-established and chartered to impart impulsive loads to a variety of targets. This loading is achieved through the detonation of a primary explosive applied directly to the target surface using a robotic spraying system. Using light as the initiating mechanism ensures virtually simultaneous loading. Uniform, discontinuous, or graded explosive loading conditions are achievable over complex shapes with the LIHE process. This direct detonation technique is a demonstrated capability at the LIHE facility. Test results will be presented. In addition to the direct detonation technique, the LIHE facility is developing the capability to explosively accelerate a thin flyer plate to impact various test targets. This explosively accelerated flyer plate (X-Flyer) will enable pressure control during impulsive loading. By controlling flyer density (material), thickness, velocity, and acceleration gap, the impact pressure amplitude and pulse duration can be controlled. Similar to the direct detonation technique, a primary explosive is robotically sprayed onto the flyer plate and subsequently detonated using an intense flash of light. Through the control of the explosive deposition and flyer gap, virtually simultaneous impact is achievable for either uniform or graded loading conditions. X-Flyer test results will be presented.

  11. High-explosive-driven delay line pulse generator

    Energy Technology Data Exchange (ETDEWEB)

    Shearer, J.W.

    1982-11-15

    The inclusion of a delay line circuit into the design of a high-explosive-driven generator shortens the time constant of the output pulse. After a brief review of generator concepts and previously described pulse-shortening methods, a geometry is presented which incorporates delay line circuit techcniques into a coil generator. The circuit constants are adjusted to match the velocity of the generated electromagnetic wave to the detonation velocity of the high explosive. The proposed generator can be modeled by adding a variable inductance term to the telegrapher's equation. A particular solution of this equation is useful for exploring the operational parameters of the generator. The duration of the electromagnetic pulse equals the radial expansion time of the high-explosive-driven armature until it strikes the coil. Because the impedance of the generator is a constant, the current multiplication factor is limited only by nonlinear effects such as voltage breakdown, diffusion, and compression at high energies.

  12. Sensitivity of once-shocked, weathered high explosives

    Energy Technology Data Exchange (ETDEWEB)

    Williams, K.L.; Harris, B.W.

    1998-07-01

    Effects caused by stimulating once-shocked, weathered high explosives (OSW-HE) are investigated. The sensitivity of OSW-HE to mechanical stimuli was determined using standard industry tests. Some initial results are given. Pieces of OSW-HE were collected from active and inactive firing sites and from an area surrounding a drop tower at Los Alamos where skid and spigot tests were done. Samples evaluated were cast explosives or plastic bonded explosive (PBX) formulations containing cyclotrimethylenetrinitramine (RDX), cyclotetramethylene tetranitramine (HMX), 2,4,6-trinitrotoluene (TNT), mock or inert HE [tris(beta-chloroethyl)phosphate (CEF)], barium nitrate, cyanuric acid, talc, and Kel-F. Once-shocked, weathered LX-10 Livermore explosive [HMX/Viton A, (95/5 wt %)], PBX 9011 [HMX/Estane, (90/10 wt %)], PBX 9404 [HMX/nitrocellulose, tris(beta-chloroethyl) phosphate, (94/3/3 wt %)], Composition B or cyclotol (TNT/RDX explosives), and PBX 9007 (90% RDX, 9.1% styrene, 0.5% dioctyl phthalate, and 0.45 resin) were subjected to the hammer test, the drop-weight impact sensitivity test, differential thermal analysis (DTA), the spark test, the Henkin`s critical temperature test, and the flame test. Samples were subjected to remote, wet cutting and drilling; remote, liquid-nitrogen-cooled grinding and crushing; and scanning electron microscope (SEM) surface analyses for morphological changes.

  13. Systematic approach to verification and validation: High explosive burn models

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Laboratory; Scovel, Christina A. [Los Alamos National Laboratory

    2012-04-16

    Most material models used in numerical simulations are based on heuristics and empirically calibrated to experimental data. For a specific model, key questions are determining its domain of applicability and assessing its relative merits compared to other models. Answering these questions should be a part of model verification and validation (V and V). Here, we focus on V and V of high explosive models. Typically, model developers implemented their model in their own hydro code and use different sets of experiments to calibrate model parameters. Rarely can one find in the literature simulation results for different models of the same experiment. Consequently, it is difficult to assess objectively the relative merits of different models. This situation results in part from the fact that experimental data is scattered through the literature (articles in journals and conference proceedings) and that the printed literature does not allow the reader to obtain data from a figure in electronic form needed to make detailed comparisons among experiments and simulations. In addition, it is very time consuming to set up and run simulations to compare different models over sufficiently many experiments to cover the range of phenomena of interest. The first difficulty could be overcome if the research community were to support an online web based database. The second difficulty can be greatly reduced by automating procedures to set up and run simulations of similar types of experiments. Moreover, automated testing would be greatly facilitated if the data files obtained from a database were in a standard format that contained key experimental parameters as meta-data in a header to the data file. To illustrate our approach to V and V, we have developed a high explosive database (HED) at LANL. It now contains a large number of shock initiation experiments. Utilizing the header information in a data file from HED, we have written scripts to generate an input file for a hydro code

  14. Development of new model for high explosives detonation parameters calculation

    Directory of Open Access Journals (Sweden)

    Jeremić Radun

    2012-01-01

    Full Text Available The simple semi-empirical model for calculation of detonation pressure and velocity for CHNO explosives has been developed, which is based on experimental values of detonation parameters. Model uses Avakyan’s method for determination of detonation products' chemical composition, and is applicable in wide range of densities. Compared with the well-known Kamlet's method and numerical model of detonation based on BKW EOS, the calculated values from proposed model have significantly better accuracy.

  15. Modeling Hot-Spot Contributions in Shocked High Explosives at the Mesoscale

    Energy Technology Data Exchange (ETDEWEB)

    Harrier, Danielle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-12

    When looking at performance of high explosives, the defects within the explosive become very important. Plastic bonded explosives, or PBXs, contain voids of air and bonder between the particles of explosive material that aid in the ignition of the explosive. These voids collapse in high pressure shock conditions, which leads to the formation of hot spots. Hot spots are localized high temperature and high pressure regions that cause significant changes in the way the explosive material detonates. Previously hot spots have been overlooked with modeling, but now scientists are realizing their importance and new modeling systems that can accurately model hot spots are underway.

  16. Recent Advances in the Synthesis of High Explosive Materials

    Science.gov (United States)

    2016-05-09

    toxic mercury fulminate (1), adopted for use in some of the first percussion primer formulations in the early 1800s [6] and later by Alfred Nobel for...high sensitivity of mercury fulminate , and its ability to lose performance under high loading pressures paved the way for lead azide (2) to replace the... mercury fulminate (1), lead azide (2) and normal lead styphnate (3) and basic lead styphnate (4). 2.2. Why “Green” Primary Explosives? Over the past two

  17. Application of solid-phase microextraction to the recovery of explosives and ignitable liquid residues from forensic specimens.

    Science.gov (United States)

    Furton, K G; Almirall, J R; Bi, M; Wang, J; Wu, L

    2000-07-14

    A current review of the application of solid-phase microextraction (SPME) to the analysis of ignitable liquids and explosive residues is presented along with experimental results demonstrating the relative effects of controllable variables. Variables discussed include fiber chemistry, adsorption and desorption temperatures, extraction and desorption times, fiber sampling placement (direct, headspace, and partial headspace) and matrix effects, including water content. SPME is shown to be an inexpensive, rapid and sensitive method for the analysis of ignitable liquids and high explosives residues from solid debris samples and from aqueous samples. Explosives are readily detected at parts per trillion concentrations and ignitable liquids are reproducibly detected at levels below those using conventional methods.

  18. Characterization Of High Explosives Detonations Via Laser-Induced Plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Villa-Aleman, E. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-10-08

    One objective of the Department of Energy’s National Security Administration is to develop technologies that can help the United States government to detect foreign nuclear weapons development activities. The realm of high explosive (HE) experiments is one of the key areas to assess the nuclear ambitions of a country. SRNL has participated in the collection of particulates from HE experiments and characterized the material with the purpose to correlate particulate matter with HE. Since these field campaigns are expensive, on-demand simulated laboratory-scale explosion experiments are needed to further our knowledge of the chemistry and particle formation in the process. Our goal is to develop an experimental test bed in the laboratory to test measurement concepts and correlate particle formation processes with the observables from the detonation fireball. The final objective is to use this knowledge to tailor our experimental setups in future field campaigns. The test bed uses pulsed laser-induced plasmas to simulate micro-explosions, with the intent to study the temporal behavior of the fireball observed in field tests. During FY15, a plan was prepared and executed which assembled two laser ablation systems, procured materials for study, and tested a Step-Scan Fourier Transform Infrared Spectrometer (SS-FTIR). Designs for a shadowgraph system for shock wave analysis, design for a micro-particulate collector from ablated pulse were accomplished. A novel spectroscopic system was conceived and a prototype system built for acquisition of spectral/temporal characterization of a high speed event such as from a high explosive detonation. Experiments and analyses will continue into FY16.

  19. Explosion induced dynamic responses of blast wall on FPSO topside: Blast loading application methods

    OpenAIRE

    Kang, Ki-Yeob; Choi, Kwang-Ho; Choi, Jae Woong; Ryu, Yong Hee; Lee, Jae-Myung

    2017-01-01

    Topside areas on an offshore oil and gas platform are highly susceptible to explosion. A blast wall on these areas plays an important role in preventing explosion damage and must withstand the expected explosion loads. The uniformly distributed loading condition, predicted by Explosion Risk Analyses (ERAs), has been applied in most of the previous analysis methods. However, analysis methods related to load conditions are inaccurate because the blast overpressure around the wall tends to be of...

  20. Initiation of Insensitive High Explosives Using Multiple Wave Interactions

    Science.gov (United States)

    Francois, Elizabeth; Burritt, Rosmary; Biss, Matt; Bowden, Patrick

    2017-06-01

    Insensitive High Explosives (IHEs) increase safety in many types of weapons. However, the safety comes at the cost of performance. Initiation of IHE requires large boosters and powerful detonators as well. Multipoint initiation is being utilized to exploit explosive wave interactions to create overdriven states, greatly facilitating the initiation of IHEs. This presentation will build from recent explosive experiments where the minimum spot size for single-point initiation in PBX 9502 was determined. Below this threshold, PBX 9502 could not be initiated. This was then expanded to three initiation points, which were smaller this threshold. Measurements of the velocity and pressure of the wave interactions were measured using Photon Doppler Velocimetry (PDV). Initiation was observed, and the resulting pressures at the double and triple points were found to be above the CJ state for PBX 9502. Based on these results, further tests were conducted to isolate and measure the longevity and pressure of this phenomenon using cut-back tests. All results will be presented and discussed.

  1. Phytoremediation of explosives for laboratory to real application

    Energy Technology Data Exchange (ETDEWEB)

    Vanek, T.; Vavrikova, Z.; Podlipna, R. [Inst. of Organic Chemistry and Biochemistry, Academy of Sciences of the Czech Republic, Prague (Czech Republic). Dept. of Plant Tissue Cultures; Gerth, A. [BioPlanta GmbH, Leipzig (Germany)

    2006-07-01

    This paper discussed the phytoremediation of 2,4,6-trinitrotoluene (TNT) contaminated soil at former ammunition factories in the Czech Republic and Germany. The uptake, degradation, and distribution of the compounds in various plants were evaluated. Characterization and identification of TNT degradation products is difficult due to the insoluble fractions bound in the plant cells. Rheum palmatum culture was supplemented with naphthaleneacetic acid and casein hydrolysate. The plant species Phragmites australis and Typha latifolia were cultivated and supplemented with vitamins. Roots were induced on the hormone-free medium during a 4 to 5 week cultivation period. 2,4,6-trinitrotoluene, glyceroltrinitrate and pentaerytritoltetranitrate were obtained from an ammunition factory. Explosives were added into the cultivation medium at a concentration of 50 mg/l during the first part of the experiment, as well as repeatedly at 10 and 50 mg/l during the second part of the experiment. The uptake of TNT by R. palmatum was determined over 24 hours. The initial concentration of TNT decreased to 50 per cent within half an hour. No TNT could be detected after 6 hours. At least 90 per cent of TNT was taken up by the plant species Phragmites, Typha and Juncus in 10 days. Faster uptake was determined in plants with roots. Phragmites australis was recommended as the best candidate for practical application as it forms a prolific biomass necessary for efficient biodegradation and is able to grow almost everywhere. A pilot-scale installation of constructed wetland containing nitroester explosives showed that the plants were able to clean water containing 270 mg/l of nitroesters and their by-products over a period of 30 days. 38 refs., 8 figs.

  2. How and When Metals React in High Performance Explosives

    Science.gov (United States)

    Anderson, Paul

    2017-06-01

    The reaction kinetics of aluminum and other metals in detonations has long been studied with the goal to obtain the full enthalpy energy of aluminum oxidation at early timeframes. This requires the oxidation reaction to occur at the same rate as explosive CHNO compounds. While the literature claims some success with model formulations, few fielded formulations obtain such performance due to competing carbon oxidation of the inert formulation binder ingredients. Moreover, from gas analysis data in detonation calorimetry, it is hypothesized that high pressure/high temperature gas equilibrium concentrations are one of some factors that play a role in obtaining early reactivity of metals in the detonation. The mechanism of these reactions and the effect on detonation responses such as detonation pressure and velocity will be discussed Membership pending.

  3. Progress in model development to quantify High Explosive Violent Response (HEVR) to mechancial insult

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2008-07-29

    The rapid release of chemical energy has found application for industrial and military purposes since the invention of gunpowder. Black powder, smokeless powder of various compositions, and pyrotechnics all exhibit the rapid release of energy without detonation when they are being used as designed. The rapidity of energy release for these materials is controlled by adjustments to the particle surface area (propellant grain configuration or powder particle size) in conjunction with the measured pressure-dependent burning rate, which is very subsonic. In this way a manufacturing process can be used to engineer the desired violence of the explosion. Detonations in molecular explosives, in contrast, propagate with a supersonic velocity that depends on the loading density, but is independent of the surface area. In ideal detonations, the reaction is complete within a small distance of the propagating shock front. Non-ideal detonations in molecular and composite explosives proceed with a slower velocity, and the reaction may continue well behind the shock front. We are developing models to describe the circumstances when molecular and composite explosives undergo a rapid release of energy without detonating. The models also apply to the behavior of rocket propellants subject to mechanical insult, whether for accidents (Hazards) or the suite of standardized tests used to assess whether the system can be designated an Insensitive Munition (IM). In the application described here, we are studying an HMX (1,3,5,7-tetranitro-1,3,5,7-tetraazacyclooctane) explosive developed in the UK, which is 91% by weight HMX and 9% binder-plasticizer. Most explosives and propellants, when subjected to a mechanical insult, drop or impact that is well below the threshold for detonation have been observed to react violently. This behavior is known as High Explosive Violent Reaction (HEVR). The basis of our model is the observation that the mechanical insult produces damage in a volume of the

  4. Benefits of explosive cutting for nuclear-facility applications

    Energy Technology Data Exchange (ETDEWEB)

    Hazelton, R.F.; Lundgren, R.A.; Allen, R.P.

    1981-06-01

    The study discussed in this report was a cost/benefit analysis to determine: (1) whether explosive cutting is cost effective in comparison with alternative metal sectioning methods and (2) whether explosive cutting would reduce radiation exposure or provide other benefits. Two separate approaches were pursued. The first was to qualitatively assess cutting methods and factors involved in typical sectioning cases and then compare the results for the cutting methods. The second was to prepare estimates of work schedules and potential radiation exposures for candidate sectioning methods for two hypothetical, but typical, sectioning tasks. The analysis shows that explosive cutting would be cost effective and would also reduce radiation exposure when used for typical nuclear facility sectioning tasks. These results indicate that explosive cutting should be one of the principal cutting methods considered whenever steel or similar metal structures or equipment in a nuclear facility are to be sectioned for repair or decommissioning. 13 figures, 7 tables. (DLC)

  5. [Application of the capillary electrophoresis technique for the study of the products of explosion and combustion of mixed explosives and pyrotechnic compositions in the forensic medical practice].

    Science.gov (United States)

    Davydov, M V; Spiridonov, V A; Budnikov, V N; Petrosiants, T G

    2010-01-01

    The authors describe methods of cation-anion analysis of aqueous media by the capillary electrophoresis technique with reference to the detection of the products of explosion and combustion of mixed explosives and pyrotechnic compositions. The possibility to use the results thus obtained for the study of an explosion injury is discussed. Optimal conditions for the separation of chloride, nitrite, nitrate, sulfate, sulfide, chlorate, and perchlorate ions are determined. The efficiency of the proposed methods for the characteristic of the cation-anion composition of the aqueous medium to identify the products of explosion and combustion of mixed explosives and pyrotechnic compounds is exemplified by their application in the forensic medical practice. It is concluded that the above techniques can be used to study explosion injuries.

  6. La steam explosion : application en tant que prétraitement de la matière lignocellulosique

    Directory of Open Access Journals (Sweden)

    Jacquet, N.

    2010-01-01

    Full Text Available Application of steam explosion for the pretreatment of the lignocellulosic raw materials. Steam explosion is a thermomechanochemical process which allows the breakdown of lignocellulosic structural components by steam heating, hydrolysis of glycosidic bonds by organic acid formed during the process and shearing forces due to the expansion of the moisture. The process is composed of two distinct stages: vapocracking and explosive decompression. Cumul effects of both phases include modification of the physical properties of the material (specific surface area, water retention capacities, color, cellulose cristallinity rate,…, hydrolysis of hemicellulosic components (mono- and oligosaccharides released and modification of the chemical structure of lignin. These effects permit the opening of lignocellulosic structures and increase the enzymatic hydrolysis rate of cellulose components in the aim to obtain fermentable sugars used in second generation biofuels or high value-added molecules process.

  7. Computer simulation of metal wire explosion under high rate heating

    Science.gov (United States)

    Zolnikov, K. P.; Kryzhevich, D. S.; Korchuganov, A. V.

    2017-05-01

    Synchronous electric explosion of metal wires and synthesis of bicomponent nanoparticles were investigated on the base of molecular dynamics method. Copper and nickel nanosized crystallites of cylindrical shape were chosen as conductors for explosion. The embedded atom approximation was used for calculation of the interatomic interactions. The agglomeration process after explosion metal wires was the main mechanism for particle synthesis. The distribution of chemical elements was non-uniform over the cross section of the bicomponent particles. The copper concentration in the surface region was higher than in the bulk of the synthesized particle. By varying the loading parameters (heating temperature, the distance between the wires) one can control the size and internal structure of the synthesized bicomponent nanoparticles. The obtained results showed that the method of molecular dynamics can be effectively used to determine the optimal technological mode of nanoparticle synthesis on the base of electric explosion of metal wires.

  8. Application of heat-balance integral method to conjugate thermal explosion

    Directory of Open Access Journals (Sweden)

    Novozhilov Vasily

    2009-01-01

    Full Text Available Conjugate thermal explosion is an extension of the classical theory, proposed and studied recently by the author. The paper reports application of heat-balance integral method for developing phase portraits for systems undergoing conjugate thermal explosion. The heat-balance integral method is used as an averaging method reducing partical differential equation problem to the set of first-order ordinary differential equations. The latter reduced problem allows natural interpretation in appropriately chosen phase space. It is shown that, with the help of heat-balance integral technique, conjugate thermal explosion problem can be described with a good accuracy by the set of non-linear first-order differential equations involving complex error function. Phase trajectories are presented for typical regimes emerging in conjugate thermal explosion. Use of heat-balance integral as a spatial averaging method allows efficient description of system evolution to be developed.

  9. 77 FR 28600 - Draft publication: Coal Dust Explosibility Meter Evaluation and Recommendations for Application

    Science.gov (United States)

    2012-05-15

    ... Meter Evaluation and Recommendations for Application Authority: 30 U.S.C. 95l. AGENCY: National... Recommendations for Application.'' The document and instructions for submitting comments can be found at http... coal dust in a mixture. The CDEM offers real-time measurements of the explosion propagation hazard...

  10. Explosively produced megagauss fields and recent solid state applications

    Energy Technology Data Exchange (ETDEWEB)

    Fowler, C.M.; Freeman, B.L.; Hults, W.L.; King, J.C.; Mueller, F.M.; Rickel, D.G.; Smith, J.L. [Los Alamos National Lab., NM (United States); Brooks, J.S.; Goettee, J.D. [Boston Univ., MA (United States). Dept. of Physics

    1993-12-31

    Large magnetic fields may be generated by compression of an initial magnetic flux generated over a large area at relatively low magnetic field into a region of smaller area. Following a discussion of flux compression principles, the authors discuss megagauss field systems in use at Los Alamos where chemical explosives are used to compress the flux. Their use in some solid state experiments will be discussed briefly, including a planned set of experiments on YBCO to be done jointly with a Russian team, whose aim is to determine the low temperature, critical magnetic field of YBCO.

  11. Neutralization of improvised explosive devices by high-power lasers: research results from the FP7 project ENCOUNTER

    Science.gov (United States)

    Osterholz, J.; Lueck, M.; Lexow, B.; Wickert, M.

    2016-10-01

    The development of reliable techniques for the safe neutralization of improvised explosive devices (IEDs) is an active field of research. Recently, innovative approaches for the neutralization of IEDs were developed and tested within the FP7 project ENCOUNTER ("Explosive Neutralisation and Mitigation Countermeasures for IEDs in Urban/Civil Environment") and were compared to existing, established technologies. Here, the ENCOUNTER project is presented with a special focus on the neutralization of IEDs by high-power lasers. The working principle of the application of high-power lasers for the neutralization of explosive devices is based on thermal effects. Heating of the IEDs main charge may occur either by direct irradiation of the explosive material or by heat transfer through the main charge's confinement. The aim of the application of the laser is to achieve a low order burning reaction of the explosive charge and thus a controlled neutralization of the IED. Since laser beams allow for the directed transport of energy, this technique can be applied over long stand-off distances and has thus potential for an increase of the safety of clearing forces and population in the case of terroristic attacks in a civilian environment. Within the ENCOUNTER project, a laboratory environment has been set up which allows for the irradiation of IEDs with a laser power of up to 10 kW. Experiments have been carried out on a broad spectrum of different types of IEDs. The processes during neutralization were studied in detail with high-speed diagnostics. On the basis of these experimental data, the safety and the reliability of the application of the laser was analyzed, and recommendations to end users were given. In addition to the results of the ENCOUNTER project, approaches for the numerical simulation of the neutralization of IEDs are discussed.

  12. Development of ammonium nitrate based explosives to optimize explosive properties and explosive welding parameters used during explosion cladding

    Science.gov (United States)

    Hurley, Christoph

    The ability to accurately measure and predict the velocity of explosively driven flyer plates has been a subject of significant work by the explosives community for some time. The majority of this work has focused on the use of high-energy, ideal explosives that are of interest for defense applications. Several attempts have been made to modify the experimental methods developed for these ideal explosives for use in testing low-energy, non-ideal explosive compounds (including industrially useful mixtures of ammonium nitrate, fuels, and additives) with varying degrees of success. The detonation properties of non-ideal explosives are difficult to measure precisely due to the effect of physical, environmental, and geometric factors on the detonation of these materials. The work presented in this document attempts to mitigate the variability inherent in measurements of non-ideal, ammonium nitrate-based explosives by performing testing using charge geometry similar to that used in the industrial process of explosion welding. A method to measure flyer plate velocity with optical high-speed imaging using commercially available equipment is described. Flyer plate velocity data from both experimental measurements and numerical modeling is presented. A new formula for predicting explosive energy based on the detonation velocity of an ammonium nitrate based explosive in a planar geometry is proposed and applied to a theoretical explosive cladding scenario.

  13. High-strain rate Brazilian testing of an explosive simulant using speckle metrology

    Science.gov (United States)

    Grantham, S. G.; Siviour, C. R.; Proud, W. G.; Field, J. E.

    2004-09-01

    The application of high-speed photography and image correlation has allowed dynamic Brazilian tests to be carried out using the split Hopkinson pressure bar (SHPB) on PBS9501, an explosive simulant. The essential features of low-rate Brazilian tests are found to occur in the high-rate experiments, with the samples reaching equilibrium quickly and remaining in equilibrium throughout the experiment. The advantage of the approach described here is the ability to make tensile stress/strain measurements in the high-strain rate regime using a compression Hopkinson bar. This allows smaller sample sizes, making testing of expensive or dangerous materials easier, while expanding the capabilities of the compression bar.

  14. iVCJ: A tool for Interactive Visualization of high explosives CJ states

    Energy Technology Data Exchange (ETDEWEB)

    Wooten, Hasani Omar [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Aslam, Tariq Dennis [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Whitley, Von Howard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-12-12

    A graphical user interface (GUI) tool has been developed that facilitates the visualization and analysis of the Chapman-Jouguet state for high explosives gaseous products using the Jones- Wilkins-Lee equation of state.

  15. Formic Acid Investigation for the Prediction of High Explosive Detonation Properties and Performance

    Science.gov (United States)

    2010-07-01

    Picatinny Arsenal, NJ, January 1993. 4. Cowperthwaite, M. and Zwisler, W. H., "The JCZ Equations of State for Detonation Products and Their...AD AD-E403 298 Technical Report ARMET-TR-10006 FORMIC ACID INVESTIGATION FOR THE PREDICTION OF HIGH EXPLOSIVE DETONATION PROPERTIES AND...DATES COVERED {From - To) 4. TITLE AND SUBTITLE FORMIC ACID INVESTIGATION FOR THE PREDICTION OF HIGH EXPLOSIVE DETONATION PROPERTIES AND PERFORMANCE

  16. Technoeconomic study on steam explosion application in biomass processing.

    Science.gov (United States)

    Zimbardi, Francesco; Ricci, Esmeralda; Braccio, Giacobbe

    2002-01-01

    This work is based on the data collected during trials of a continuous steam explosion (SE) plant, with a treatment capacity of about 350 kg/h, including the biomass fractionation section. The energy and water consumption, equipment cost, and manpower needed to run this plant have been used as the base case for a techno-economic evaluation of productive plants. Three processing plant configurations have been considered: (I) SE pretreatment only; (II) SE followed by the hemicellulose extraction; (III) SE followed by the sequential hemicellulose and lignin extractions. The biomass treatment cost has been evaluated as a function of the plant scale. For each configuration, variable and fixed cost breakdown has been detailed in the case of a 50,000 t/y plant.

  17. Performance evaluation of diaminoazoxyfurazan (DAAF) as a booster material for insensitive high explosives using the onionskin test

    Energy Technology Data Exchange (ETDEWEB)

    Morris, John S [Los Alamos National Laboratory; Francois, Elizabeth G [Los Alamos National Laboratory; Hooks, Daniel E [Los Alamos National Laboratory; Hill, Larry G [Los Alamos National Laboratory; Harry, Herbert H [Los Alamos National Laboratory

    2010-11-09

    Initiation of insensitive high explosive (IHE) formulations requires the use of a booster explosive in the initiation train. Booster material selection is crucial, as the initiation must reliably function across some spectrum of physical parameters. The interest in DAAF for this application stems from the fact that it possesses many traits of an IHE but is shock sensitive enough to serve as an explosive booster. A hemispherical wave breakout test, termed the onionskin test, is one of the methods used to evaluate the performance of a booster material. The wave breakout time-position history at the surface of a hemisphericallHE charge is recorded and the relative uniformity of the breakout can be quantitatively compared between booster materials. A series of onionskin tests were performed to investigate breakout and propagation diaminoazoxyfurazan (DAAF) at low temperatures to evaluate ignition and detonation spreading in comparison to other explosives commonly used in booster applications. Some wave perturbation was observed with the DAAF booster in the onionskin tests presented. The results of these tests will be presented and discussed.

  18. Isentropic compression of metals, at multi-megabar pressures, using high explosive pulsed power

    Energy Technology Data Exchange (ETDEWEB)

    Tasker, D. G. (Douglas G.); Goforth, J. H. (James H.); King, J. C. (James Carrel); Martinez, E. C. (Ernesto C.); Oona, H. (Hain); Sena, F. C. (Francis C.); Reisman, D. B. (David B.); Cauble, R. C. (Robert C.)

    2001-01-01

    Accurate, ultra-high pressure isentropic equation of state (EOS) data, are required for a variety of applications and materials. Asay reported a new method to obtain these data using pulsed magnetic loading on the Sandia Z-machine. Fast rising current pulses (risetimes from 100 to 30011s) at current densities exceeding many MNcm, create continuous magnetic loading up to a few Mbar. As part of a collaborative effort between the Los Alamos and Lawrence Livermore National Laboratories we are adapting our high explosive pulsed power (HEPP) methods to obtain isentropic EOS data with the Asay technique. This year we plan to obtain isentropic EOS data for copper and tantalum at pressures up to -2 Mbar; eventually we hope to reach several tens of Mbar. We will describe the design of the HEPP systems and show out attempts to obtain EOS data to date.

  19. Los Alamos experimental capabilities: Ancho Canyon high explosives and pulse power facilities

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.E.

    1993-01-01

    This document outlines the Ancho Canyon testing facility comprehensive material characterization capabilities. These include the high explosive (HE) firing sites, a full complement of gun facilities, and variety of pulse power capacitor bank systems of various energies. The explosive fabrication capability at Los Alamos allows the design and testing of unique HE experimental assemblies. Depending on the hydrodynamic requirements, these explosive systems can vary widely in cost. Years of experience have enabled the development of a comprehensive set of diagnostics to monitor these experiments.

  20. Los Alamos experimental capabilities: Ancho Canyon high explosives and pulse power facilities

    Energy Technology Data Exchange (ETDEWEB)

    Morris, C.E.

    1993-02-01

    This document outlines the Ancho Canyon testing facility comprehensive material characterization capabilities. These include the high explosive (HE) firing sites, a full complement of gun facilities, and variety of pulse power capacitor bank systems of various energies. The explosive fabrication capability at Los Alamos allows the design and testing of unique HE experimental assemblies. Depending on the hydrodynamic requirements, these explosive systems can vary widely in cost. Years of experience have enabled the development of a comprehensive set of diagnostics to monitor these experiments.

  1. Role of explosive instabilities in high-$\\beta$ disruptions in tokamaks

    CERN Document Server

    Aydemir, A Y; Lee, S G; Seol, J; Park, B H; In, Y K

    2016-01-01

    Intrinsically explosive growth of a ballooning finger is demonstrated in nonlinear magnetohydrodynamic calculations of high-$\\beta$ disruptions in tokamaks. The explosive finger is formed by an ideally unstable n=1 mode, dominated by an m/n=2/1 component. The quadrupole geometry of the 2/1 perturbed pressure field provides a generic mechanism for the formation of the initial ballooning finger and its subsequent transition from exponential to explosive growth, without relying on secondary processes. The explosive ejection of the hot plasma from the core and stochastization of the magnetic field occur in Alfv\\'enic time scales, accounting for the extremely fast growth of the precursor oscillations and the rapidity of the thermal quench in some high-$\\beta$ disruptions.

  2. Analysis of xRAGE and flag high explosive burn models with PBX 9404 cylinder tests

    Energy Technology Data Exchange (ETDEWEB)

    Harrier, Danielle [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Andersen, Kyle Richard [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2016-08-05

    High explosives are energetic materials that release their chemical energy in a short interval of time. They are able to generate extreme heat and pressure by a shock driven chemical decomposition reaction, which makes them valuable tools that must be understood. This study investigated the accuracy and performance of two Los Alamos National Laboratory hydrodynamic codes, which are used to determine the behavior of explosives within a variety of systems: xRAGE which utilizes an Eulerian mesh, and FLAG with utilizes a Lagrangian mesh. Various programmed and reactive burn models within both codes were tested using a copper cylinder expansion test. The test was based on a recent experimental setup which contained the plastic bonded explosive PBX 9404. Detonation velocity versus time curves for this explosive were obtained using Photon Doppler Velocimetry (PDV). The modeled results from each of the burn models tested were then compared to one another and to the experimental results. This study validate

  3. Research of explosives in an environment of high pressure and temperature using a new test stand

    Directory of Open Access Journals (Sweden)

    Jan Drzewiecki

    2015-01-01

    Full Text Available In this article the test stand for determining the blast abilities of explosives in high pressure and temperature conditions as well as the initial results of the research are presented. Explosives are used in rock burst and methane prevention to destroy precisely defined fragments of the rock mass where energy and methane are accumulated. Using this preventive method for fracturing the structure of the rocks which accumulate the energy or coal of the methane seam very often does not bring the anticipated results. It is because of the short range of destructive action of the post-blast gases around the blast hole. Evaluation of the blast dynamics of explosives in a test chamber, i.e. in the pressure and temperature conditions comparable to those found “in situ”, will enable evaluation of their real usefulness in commonly used mining hazard preventive methods. At the same time, it will enable the development of new designs of the explosive charges used for precisely determined mining hazards. In order to test the explosives for their use in difficult environmental conditions and to determine the characteristics of their explosion, a test chamber has been built. It is equipped with a system of sensors and a high-frequency recording system of pressure and temperature during a controlled explosion of an explosive charge. The results of the research will enable the development of new technologies for rock burst and methane prevention which will significantly increase workplace health and safety level. This paper presented results constitute the initial phase of research started in the middle of 2014.

  4. Synthesis and characterization of electro-explosive magnetic nanoparticles for biomedical applications

    Science.gov (United States)

    Bakina, O. V.; Glazkova, E. A.; Svarovskaya, N. V.; Lerner, M. I.; Korovin, M. S.; Fomenko, A. N.

    2017-09-01

    Nowadays there are new magnetic nanostructures based on bioactive metals with low toxicity and high efficiency for a wide range of biomedical applications including drugs delivery, antimicrobial drugs design, cells' separation and contrasting. For such applications it is necessary to develop highly magnetic particles with less than 100 nm in size. In the present study magnetic nanoparticles Fe, Fe3O4 and bimetallic Cu/Fe with the average size of 60-90 nm have been synthesized by electrical explosion of wire in an oxygen or argon atmosphere. The produced nanoparticles have been characterized with transmission electron microscopy, X-ray phase analysis, and nitrogen thermal desorption. The synthesized particles have shown antibacterial activity to gram-positive (S. aureus, MRSA) and gramnegative (E. coli, P. aeruginosa) bacteria. According to the cytological data Fe, Fe3O4 and Cu/Fe nanoparticles have effectively inhibited viability of cancer cell lines Neuro-2a and J774. The obtained nanoparticles are promising for new antimicrobial drugs and antitumor agents' development.

  5. High methane natural gas/air explosion characteristics in confined vessel.

    Science.gov (United States)

    Tang, Chenglong; Zhang, Shuang; Si, Zhanbo; Huang, Zuohua; Zhang, Kongming; Jin, Zebing

    2014-08-15

    The explosion characteristics of high methane fraction natural gas were investigated in a constant volume combustion vessel at different initial conditions. Results show that with the increase of initial pressure, the peak explosion pressure, the maximum rate of pressure rise increase due to a higher amount (mass) of flammable mixture, which delivers an increased amount of heat. The increased total flame duration and flame development time result as a consequence of the higher amount of flammable mixture. With the increase of the initial temperature, the peak explosion pressures decrease, but the pressure increase during combustion is accelerated, which indicates a faster flame speed and heat release rate. The maximum value of the explosion pressure, the maximum rate of pressure rise, the minimum total combustion duration and the minimum flame development time is observed when the equivalence ratio of the mixture is 1.1. Additionally, for higher methane fraction natural gas, the explosion pressure and the maximum rate of pressure rise are slightly decreased, while the combustion duration is postponed. The combustion phasing is empirically correlated with the experimental parameters with good fitting performance. Furthermore, the addition of dilute gas significantly reduces the explosion pressure, the maximum rate of pressure rise and postpones the flame development and this flame retarding effect of carbon dioxide is stronger than that of nitrogen. Copyright © 2014 Elsevier B.V. All rights reserved.

  6. Highly Sensitive Filter Paper Substrate for SERS Trace Explosives Detection

    Directory of Open Access Journals (Sweden)

    Pedro M. Fierro-Mercado

    2012-01-01

    Full Text Available We report on a novel and extremely low-cost surface-enhanced Raman spectroscopy (SERS substrate fabricated depositing gold nanoparticles on common lab filter paper using thermal inkjet technology. The paper-based substrate combines all advantages of other plasmonic structures fabricated by more elaborate techniques with the dynamic flexibility given by the inherent nature of the paper for an efficient sample collection, robustness, and stability. We describe the fabrication, characterization, and SERS activity of our substrate using 2,4,6-trinitrotoluene, 2,4-dinitrotoluene, and 1,3,5-trinitrobenzene as analytes. The paper-based SERS substrates presented a high sensitivity and excellent reproducibility for analytes employed, demonstrating a direct application in forensic science and homeland security.

  7. Ammonium nitrate explosion hazards

    Directory of Open Access Journals (Sweden)

    Negovanović Milanka

    2015-01-01

    Full Text Available Ammonium nitrate (AN primarily is used as a fertilizer but it is also very important compound in the production of industrial explosives. The application of ammonium nitrate in the production of industrial explosives was related with the early era of Nobel dynamite and widely increased with the appearance of blasting agents such as ANFO and Slurry, in the middle of the last Century. Throughout the world millions of tons of ammonium nitrate are produced annually and handled without incident. Although ammonium nitrate generally is used safely, accidental explosions involving AN have high impact resulting in loss of lives and destruction of property. The paper presents the basic properties of ammonium nitrate as well as hazards in handling of ammonium nitrate in order to prevent accidents. Several accidents with explosions of ammonium nitrate resulted in catastrophic consequences are listed in the paper as examples of non-compliance with prescribed procedures.

  8. On beyond the standard model for high explosives: challenges & obstacles to surmount

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph Ds [Los Alamos National Laboratory

    2009-01-01

    Plastic-bonded explosives (PBX) are heterogeneous materials. Nevertheless, current explosive models treat them as homogeneous materials. To compensate, an empirically determined effective burn rate is used in place of a chemical reaction rate. A significant limitation of these models is that different burn parameters are needed for applications in different regimes; for example, shock initiation of a PBX at different initial temperatures or different initial densities. This is due to temperature fluctuations generated when a heterogeneous material is shock compressed. Localized regions of high temperatures are called hot spots. They dominate the reaction for shock initiation. The understanding of hot spot generation and their subsequent evolution has been limited by the inability to measure transients on small spatial ({approx} 1 {micro}m) and small temporal ({approx} 1 ns) scales in the harsh environment of a detonation. With the advances in computing power, it is natural to try and gain an understanding of hot-spot initiation with numerical experiments based on meso-scale simulations that resolve material heterogeneities and utilize realistic chemical reaction rates. However, to capture the underlying physics correctly, such high resolution simulations will require more than fast computers with a large amount of memory. Here we discuss some of the issues that need to be addressed. These include dissipative mechanisms that generate hot spots, accurate thermal propceties for the equations of state of the reactants and products, and controlling numerical entropy error from shock impedance mismatches at material interfaces. The later can generate artificial hot spots and lead to premature reaction. Eliminating numerical hot spots is critical for shock initiation simulations due to the positive feedback between the energy release from reaction and the hydrodynamic flow.

  9. Simulation of high-speed interaction between impactor and layered-spaced design involving explosive

    Science.gov (United States)

    Ishchenko, Aleksandr; Afanas'eva, Svetlana; Belov, Nikolai; Burkin, Viktor; Zykova, Angelica; Rogaev, Konstantin; Yugov, Nikolai

    2016-10-01

    In this paper we present calculating and experimental study of high-speed interaction between explosive content, protected by layered-spaced design, and the cermet impactor in wide speed range. An experimental technique and mathematical model of during the behavior of explosives, protected by layer-spaced design, by with high-speed impact. The process of the interaction between the cermet impactor and element of the protective design is customized and depends on the materials of the interacting bodies, the speed and angle of impact.

  10. Comparison Between Surf and Multi-Shock Forest Fire High Explosive Burn Models

    Energy Technology Data Exchange (ETDEWEB)

    Greenfield, Nicholas Alexander [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-07-18

    PAGOSA1 has several different burn models used to model high explosive detonation. Two of these, Multi-Shock Forest Fire and Surf, are capable of modeling shock initiation. Accurately calculating shock initiation of a high explosive is important because it is a mechanism for detonation in many accident scenarios (i.e. fragment impact). Comparing the models to pop-plot data give confidence that the models are accurately calculating detonation or lack thereof. To compare the performance of these models, pop-plots2 were created from simulations where one two cm block of PBX 9502 collides with another block of PBX 9502.

  11. A verification and validation effort for high explosives at Los Alamos National Lab (u)

    Energy Technology Data Exchange (ETDEWEB)

    Scovel, Christina A [Los Alamos National Laboratory; Menikoff, Ralph S [Los Alamos National Laboratory

    2009-01-01

    We have started a project to verify and validate ASC codes used to simulate detonation waves in high explosives. Since there are no non-trivial analytic solutions, we are going to compare simulated results with experimental data that cover a wide range of explosive phenomena. The intent is to compare both different codes and different high explosives (HE) models. The first step is to test the products equation of state used for the HE models, For this purpose, the cylinder test, flyer plate and plate-push experiments are being used. These experiments sample different regimes in thermodynamic phase space: the CJ isentrope for the cylinder tests, the isentrope behind an overdriven detonation wave for the flyer plate experiment, and expansion following a reflected CJ detonation for the plate-push experiment, which is sensitive to the Gruneisen coefficient. The results of our findings for PBX 9501 are presented here.

  12. a Verification and Validation Effort for High Explosives at LOS Alamos National Lab

    Science.gov (United States)

    Scovel, C. A.; Menikoff, R.

    2009-12-01

    We have started a project to verify and validate ASC codes used to simulate detonation waves in high explosives. Since there are no non-trivial analytic solutions, we are going to compare simulated results with experimental data that cover a wide range of explosive phenomena. The intent is to compare both different codes and different high explosives (HE) models. The first step is to test the products equation of state used for the HE models. For this purpose, the cylinder test, flyer plate and plate-push experiments are being used. These experiments sample different regimes in thermodynamic phase space: the CJ isentrope for the cylinder tests, the isentrope behind an overdriven detonation wave for the flyer plate experiment, and expansion following a reflected CJ detonation for the pate-push experiment, which is sensitive to the Gruneisen coefficient.

  13. Fluorescent signaling based on sulfoxide profluorophores: application to the visual detection of the explosive TATP.

    Science.gov (United States)

    Malashikhin, Sergey; Finney, Nathaniel S

    2008-10-01

    The first visual fluorescence-based assay for the peroxide explosive triacetone triperoxide (TATP) is described. The assay is based on a conceptually new fluorescence signaling mechanism, in which nonemissive pyrenyl sulfoxide profluorophores are oxidized to visibly emissive pyrenyl sulfones. Although not without limitations, these first-generation fluorescent probes can provide a visual response to ca. 100 nmol of TATP. In addition, the success of this assay suggests the potential for broader application of aryl sulfoxides in fluorescent chemosensing.

  14. Managing the explosion of high resolution topography in the geosciences

    Science.gov (United States)

    Crosby, Christopher; Nandigam, Viswanath; Arrowsmith, Ramon; Phan, Minh; Gross, Benjamin

    2017-04-01

    Centimeter to decimeter-scale 2.5 to 3D sampling of the Earth surface topography coupled with the potential for photorealistic coloring of point clouds and texture mapping of meshes enables a wide range of science applications. Not only is the configuration and state of the surface as imaged valuable, but repeat surveys enable quantification of topographic change (erosion, deposition, and displacement) caused by various geologic processes. We are in an era of ubiquitous point clouds that come from both active sources such as laser scanners and radar as well as passive scene reconstruction via structure from motion (SfM) photogrammetry. With the decreasing costs of high-resolution topography (HRT) data collection, via methods such as SfM and UAS-based laser scanning, the number of researchers collecting these data is increasing. These "long-tail" topographic data are of modest size but great value, and challenges exist to making them widely discoverable, shared, annotated, cited, managed and archived. Presently, there are no central repositories or services to support storage and curation of these datasets. The U.S. National Science Foundation funded OpenTopography (OT) Facility employs cyberinfrastructure including large-scale data management, high-performance computing, and service-oriented architectures, to provide efficient online access to large HRT (mostly lidar) datasets, metadata, and processing tools. With over 225 datasets and 15,000 registered users, OT is well positioned to provide curation for community collected high-resolution topographic data. OT has developed a "Community DataSpace", a service built on a low cost storage cloud (e.g. AWS S3) to make it easy for researchers to upload, curate, annotate and distribute their datasets. The system's ingestion workflow will extract metadata from data uploaded; validate it; assign a digital object identifier (DOI); and create a searchable catalog entry, before publishing via the OT portal. The OT Community

  15. Simulation Study of Near-Surface Coupling of Nuclear Devices vs. Equivalent High-Explosive Charges

    Energy Technology Data Exchange (ETDEWEB)

    Fournier, Kevin B [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Walton, Otis R [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Benjamin, Russ [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Dunlop, William H [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2014-09-29

    A computational study was performed to examine the differences in near-surface ground-waves and air-blast waves generated by high-explosive energy sources and those generated by much higher energy - density low - yield nuclear sources. The study examined the effect of explosive-source emplacement (i.e., height-of-burst, HOB, or depth-of-burial, DOB) over a range from depths of -35m to heights of 20m, for explosions with an explosive yield of 1-kt . The chemical explosive was modeled by a JWL equation-of-state model for a ~14m diameter sphere of ANFO (~1,200,000kg – 1 k t equivalent yield ), and the high-energy-density source was modeled as a one tonne (1000 kg) plasma of ‘Iron-gas’ (utilizing LLNL’s tabular equation-of-state database, LEOS) in a 2m diameter sphere, with a total internal-energy content equivalent to 1 k t . A consistent equivalent-yield coupling-factor approach was developed to compare the behavior of the two sources. The results indicate that the equivalent-yield coupling-factor for air-blasts from 1 k t ANFO explosions varies monotonically and continuously from a nearly perfec t reflected wave off of the ground surface for a HOB ≈ 20m, to a coupling factor of nearly zero at DOB ≈ -25m. The nuclear air - blast coupling curve, on the other hand, remained nearly equal to a perfectly reflected wave all the way down to HOB’s very near zero, and then quickly dropped to a value near zero for explosions with a DOB ≈ -10m. The near - surface ground - wave traveling horizontally out from the explosive source region to distances of 100’s of meters exhibited equivalent - yield coupling - factors t hat varied nearly linearly with HOB/DOB for the simulated ANFO explosive source, going from a value near zero at HOB ≈ 5m to nearly one at DOB ≈ -25m. The nuclear-source generated near-surface ground wave coupling-factor remained near zero for almost all HOB’s greater than zero, and then appeared to vary nearly - linearly with depth

  16. Compact submicrosecond, high current generator for wire explosion experiments

    Science.gov (United States)

    Aranchuk, L. E.; Chuvatin, A. S.; Larour, J.

    2004-01-01

    The PIAF generator was designed for low total energy and high energy density experiments with liners, X-pinch or fiber Z-pinch loads. These studies are of interest for such applications as surface and material science, microscopy of biological specimens, lithography of x-ray sensitive resists, and x-ray backlighting of pulsed-power plasmas. The generator is based on an RLC circuit that includes six NWL 180 nF-50 kV capacitors that store up to 1.3 kJ. The capacitors are connected in parallel to a single multispark switch designed to operate at atmospheric pressure. The switch allows reaching a time delay between the trigger pulse and the current pulse of less than 80 ns and has jitter of 6 ns. The total inductance without a load compartment was optimized to be as low as 16 nH, which leads to extremely low impedance of ˜0.12 Ω. A 40 kV initial voltage provides 250 kA maximum current in a 6 nH inductive load with a 180 ns current rise time. PIAF has dimensions of 660×660×490 mm and weight of less than 100 kg, thus manifesting itself as robust, simple to operate, and cost effective. A description of the PIAF generator and the initial experimental results on PIAF with an X-pinch type load are reported. The generator was demonstrated to operate successfully with an X-pinch type load. The experiments first started with investigation of the previously unexplored X-pinch conduction time range, 100 ns-1 μs. A single short radiation pulse was obtained that came from a small, point-like plasma. The following x-ray source characteristics were achieved: typical hot spot size of 50-100 μm, radiation pulse duration of 1.5-2 ns, and radiation yield of about 250-500 mJ in the softer spectral range (hν⩾700 eV) and 50-100 mJ in the harder one (hν⩾1 keV). These results provide the potential for further application of this source, such as use as a backlight diagnostic tool.

  17. Full-scale high-speed schlieren imaging of explosions and gunshots

    Science.gov (United States)

    Settles, Gary S.; Grumstrup, Torben P.; Dodson, Lori J.; Miller, J. D.; Gatto, Joseph A.

    2005-03-01

    High-speed imaging and cinematography are important in research on explosions, firearms, and homeland security. Much can be learned from imaging the motion of shock waves generated by such explosive events. However, the required optical equipment is generally not available for such research due to the small aperture and delicacy of the optics and the expense and expertise required to implement high-speed optical methods. For example, previous aircraft hardening experiments involving explosions aboard full-scale aircraft lacked optical shock imaging, even though such imaging is the principal tool of explosion and shock wave research. Here, experiments are reported using the Penn State Full-Scale Schlieren System, a lens-and-grid-type optical system with a very large field-of-view. High-speed images are captured by photography using an electronic flash and by a new high-speed digital video camera. These experiments cover a field-of-view of 2x3 m at frame rates up to 30 kHz. Our previous high-speed schlieren cinematography experiments on aircraft hardening used a traditional drum camera and photographic film. A stark contrast in utility is found between that technology and the all-digital high-speed videography featured in this paper.

  18. Numerical Simulation and Experimental Study on Formation of High Concentration of H2 Generated by Gas Explosion

    Directory of Open Access Journals (Sweden)

    Lei Baiwei

    2016-10-01

    Full Text Available In coal mine fire rescues, if the abnormal increase of gas concentration occurs, it is the primary thing to analyze the reasons and identify sources of the abnormal forming, which is also the basis of judge the combustion state of fire area and formulate proper fire reliefs. Nowadays, related researches have recognized the methane explosion as the source of high concentration of H2 formation, but there are few studies about the conditions and reaction mechanism of gas explosion generating high concentration of H2.Therefore, this paper uses the chemical kinetic calculation software, ChemKin, and the 20L spherical explosion experimental device to simulate the generating process and formation conditions of H2 in gas explosion. The experimental results show that: the decomposition of water vapor is the main base element reaction (R84 which leads to the generation of H2.The free radical H is the key factor to influence the formation of H2 generated from gas explosion. With the gradual increase of gas explosion concentration, the explosive reaction becomes more incomplete, and then the generating quantity of H2 increases gradually. Experimental results of 20L spherical explosion are consistent with the change trend about simulation results, which verifies the accuracy of simulation analysis. The results of explosion experiments show that when gas concentration is higher than 9%, the incomplete reaction of methane explosion increases which leads to the gradual increase of H2 formation.

  19. Simulating the Thermal Response of High Explosives on Time Scales of Days to Microseconds

    Energy Technology Data Exchange (ETDEWEB)

    Yoh, J J; McClelland, M A

    2003-07-16

    We present an overview of computational techniques for simulating the thermal cookoff of high explosives using a multi-physics hydrodynamics code, ALE3D. Recent improvements to the code have aided our computational capability in modeling the response of energetic materials systems exposed to extreme thermal environments, such as fires. We consider an idealized model process for a confined explosive involving the transition from slow heating to rapid deflagration in which the time scale changes from days to hundreds of microseconds. The heating stage involves thermal expansion and decomposition according to an Arrhenius kinetics model while a pressure-dependent burn model is employed during the explosive phase. We describe and demonstrate the numerical strategies employed to make the transition from slow to fast dynamics.

  20. HALFTON: A high-explosive containment experiment in partially saturated tuff

    Energy Technology Data Exchange (ETDEWEB)

    Smith, C.W.

    1996-03-01

    The HALFTON experiment explored the phenomena of high explosive detonations in 90% water-saturated tuff rock. The explosive source was a 453 kg TNT sphere which was grouted in a drift in G Tunnel, Nevada Test Site. Active gages measured stresses and motions in the range of 1.3 to 5.3 cavity radii and showed a peak stress decay as range raised to the {minus}2.77 power. Additional stress gages were fielded to investigate the gage inclusion problem.

  1. Research on Initiation Sensitivity of Solid Explosive and Planer Initiation System

    Directory of Open Access Journals (Sweden)

    N Matsuo

    2016-09-01

    Full Text Available Firstly, recently, there are a lot of techniques being demanded for complex process, various explosive initiation method and highly accurate control of detonation are needed. In this research, the metal foil explosion using high current is focused attention on the method to obtain linear or planate initiation easily, and the main evaluation of metal foil explosion to initiate explosive was conducted. The explosion power was evaluated by observing optically the underwater shock wave generated from the metal foil explosion. Secondly, in high energy explosive processing, there are several applications, such as shock compaction, explosive welding, food processing and explosive forming. In these explosive applications, a high sensitive explosive has been mainly used. The high sensitive explosive is so dangerous, since it can lead to explosion suddenly. So, for developing explosives, the safety is the most important thing as well as low manufacturing cost and explosive characteristics. In this work, we have focused on the initiation sensitivity of a solid explosive and performed numerical analysis of sympathetic detonation. The numerical analysis is calculated by LS-DYNA 3D (commercial code. To understand the initiation reaction of an explosive, Lee-Tarver equation was used and impact detonation process was analyzed by ALE code. Configuration of simulation model is a quarter of circular cylinder. The donor type of explosive (SEP was used as initiation explosive. When the donor explosive is exploded, a shock wave is generated and it propagates into PMMA, air and metallic layers in order. During passing through the layers, the shock wave is attenuated and finally, it has influence on the acceptor explosive, Comp. B. Here, we evaluate the initiation of acceptor explosive and discuss about detonation pressure, reactive rate of acceptor explosive and attenuation of impact pressure.

  2. High-Energy-Absorbing Enclosure for Internal Explosion Containment.

    Science.gov (United States)

    1995-06-15

    reinforced high strain-to-failure viscoelastic matrix material. The core includes foam material which, for many is embodiments, selectively varies...developed is fiber-reinforced polyurethane . Polyurethane is a highly viscoelastic matrix material, having strain-to-failure of 400-500%, compared to... polyurethane in combination with urea as a highly viscoelastic matrix material having properties similar to polyurethane alone. For convenience the terms

  3. Ion Mobility Spectrometry - High Resolution LTQ-Orbitrap Mass Spectrometry for Analysis of Homemade Explosives

    Science.gov (United States)

    Hagan, Nathan; Goldberg, Ilana; Graichen, Adam; St. Jean, Amanda; Wu, Ching; Lawrence, David; Demirev, Plamen

    2017-08-01

    The detailed chemical characterization of homemade explosives (HMEs) and other chemicals that can mimic or mask the presence of explosives is important for understanding and improving the performance of commercial instrumentation used for explosive detection. To that end, an atmospheric-pressure drift tube ion mobility spectrometry (IMS) instrument has been successfully coupled to a commercial tandem mass spectrometry (MS) system. The tandem MS system is comprised of a linear ion trap and a high resolution Orbitrap analyzer. This IMS-MS combination allows extensive characterization of threat chemical compounds, including HMEs, and complex real-world background chemicals that can interfere with detection. Here, the composition of ion species originating from a specific HME, erythritol tetranitrate, has been elucidated using accurate mass measurements, isotopic ratios, and tandem MS. Gated IMS-MS and high-resolution MS have been used to identify minor impurities that can be indicative of the HME source and/or synthesis route. Comparison between data obtained on the IMS/MS system and on commercial stand-alone IMS instruments used as explosive trace detectors (ETDs) has also been performed. Such analysis allows better signature assignments of threat compounds, modified detection algorithms, and improved overall ETD performance.

  4. Heat pipe cooling system of high-power three-level explosion-proof inverter based on the loss calculation and finite element analysis

    Science.gov (United States)

    Li, Yuan

    2017-07-01

    The special using condition of high-power three-level explosion-proof inverter limits its cooling system within heat pipe and water-cooled cooling systems. How to calculate these two systems quantitatively to provide references for engineering application becomes one of the critical problems. In this paper, the principle of three-level explosion-proof was introduced first, and the power-loss generation theory was described and deduced into equations. Secondly, the heat pipe cooling system theory calculation was conducted based on the power losses of power devices, and the whole cooling system model was built by using finite element analysis. Finally, the temperature rise experiment was carried out on a 1 MW high-power three-level explosion-proof inverter, and the results proved the feasibility of this theory and its accuracy of analysis.

  5. Implementation of Smoothed Particle Hydrodynamics for Detonation of Explosive with Application to Rock Fragmentation

    Science.gov (United States)

    Pramanik, R.; Deb, D.

    2015-07-01

    The paper presents a methodology in the SPH framework to analyze physical phenomena those occur in detonation process of an explosive. It mainly investigates the dynamic failure mechanism in surrounding brittle rock media under blast-induced stress wave and expansion of high pressure product gases. A program burn model is implemented along with JWL equation of state to simulate the reaction zone in between unreacted explosive and product gas. Numerical examples of detonation of one- and two-dimensional explosive slab have been carried out to investigate the effect of reaction zone in detonation process and outward dispersion of gaseous product. The results are compared with those obtained from existing solutions. A procedure is also developed in SPH framework to apply continuity conditions between gas and rock interface boundaries. The modified Grady-Kipp damage model for the onset of tensile yielding and Drucker-Prager model for shear failure are implemented for elasto-plastic analysis of rock medium. The results show that high compressive stress causes high crack density in the vicinity of blast hole. The major principal stress (tensile) is responsible for forming radial cracks from the blast hole. Spalling zones are also developed due to stress waves reflected from the free surfaces.

  6. Incremental Explosive Analysis and Its Application to Performance-Based Assessment of Stiffened and Unstiffened Cylindrical Shells Subjected to Underwater Explosion

    Directory of Open Access Journals (Sweden)

    Masoud Biglarkhani

    2017-01-01

    Full Text Available Incremental explosive analysis (IEA is addressed as an applicable method for performance-based assessment of stiffened and unstiffened cylindrical shells subjected to underwater explosion (UNDEX loading. In fact, this method is inspired by the incremental dynamic analysis (IDA which is a known parametric analysis method in the field of earthquake engineering. This paper aims to introduce the application of IEA approach in UNDEX in order to estimate different limit states and deterministic assessment of cylindrical shells, considering the uncertainty of loading conditions. The local, bay, and general buckling modes are defined as limit states for performance calculation. Different standoff distances and depth parameters combining several loading conditions are considered. The explosive loading intensity is specified and scaled in several levels to force the structure through the entire range of its behavior. The results are plotted in terms of a damage measure (DM versus selected intensity measure (IM. The statistical treatment of the obtained multi-IEA curves is performed to summarize the results in a predictive mode. Finally, the fragility curves as damage probability indicators of shells in UNDEX loading are extracted. Results show that the IEA is a promising method for performance-based assessment of cylindrical shells subjected to UNDEX loading.

  7. Analysis of concentration patterns in volcanic rocks: Insights into dynamics of highly explosive volcanic eruptions

    Science.gov (United States)

    Perugini, D.; Petrelli, M.; Poli, G.

    2006-10-01

    In this contribution we present new data resulting from the analysis of concentration patterns of mixed juvenile fragments ejected by a highly explosive volcanic eruption that occurred on Salina Island (Aeolian Islands, Italy) and our aim is to identify the fluid-dynamic regime characterizing the magma mixing process. Concentration patterns are studied by calculating the power spectrum of concentration variability along transects crossing the magma mixing structures. Results indicate that the slope of power spectrum has an average value of about -5/3, according to Kolmogorov law of turbulence, and suggest that the magma mixing process, in the studied conditions, can be approximated by considering the passive scalar mixing hypothesis in homogeneous isotropic turbulent flow. These results represent a first step towards a better understanding of magma mixing processes associated to highly explosive volcanic eruptions and this first step is taken by studying concentration patterns in volcanic rocks by coupling petrological and non-linear dynamics methods.

  8. Application of Explosion Area Control Volume in MELCOR Code for Safety Analysis of Hydrogen and Dust Explosion Accident in ITER

    Energy Technology Data Exchange (ETDEWEB)

    Lim, Soo Min; Moon, Sung Bo; Bang, In Cheol [UNIST, Ulsan (Korea, Republic of)

    2016-10-15

    Nuclear fusion power is said to be one of the most promising energy sources to generate large amount of energy with less radioactive waste or less radiological hazard due to nuclear accidents. However, the nuclear fusion device still confronts the tritium management tasks because they hold considerable amount of tritium for fusion reaction. In so-called 'Hypothetical events,' the beyond the design basis accidents in nuclear fusion reactors, a radiological material release may occur. Therefore, safety analysis for hydrogen mitigation and management should be performed to demonstrate the ultimate safety margin of the design to evade from situations such as the Fukushima accident. For ITER facility, accident analysis report (AAR) demonstrates the analysis of selected postulated accident scenarios holding the most challenging in terms of expected radiological consequences including beyond design basis accidents. Hydrogen and dust explosion in the ITER vacuum vessel using explosion area was modeled with MELCOR code. The vacuum vessel confinement was ruptured making a penetration line between vacuum vessel and port/NBI cell. The overall pressure transient of the accident was similar with the ITER accident analysis report (AAR) results, however, amount of tungsten dust release into the environment was significantly different.

  9. Development of an air cleaning system for dissolving high explosives from nuclear warheads

    Energy Technology Data Exchange (ETDEWEB)

    Bergman, W.; Wilson, K.; Staggs, K.; Wapman, D. [Lawrence Livermore National Lab., CA (United States)

    1997-08-01

    The Department of Energy (DOE) has a major effort underway in dismantling nuclear weapons. In support of this effort we have been developing a workstation for removing the high explosive (HE) from nuclear warheads using hot sprays of dimethyl sulfoxide (DMSO) solvent to dissolve the HE. An important component of the workstation is the air cleaning system that is used to contain DMSO aerosols and vapor and radioactive aerosols. The air cleaning system consists of a condenser to liquefy the hot DMSO vapor, a demister pad to remove most of the DMSO aerosols, a high efficiency particulate air (HEPA) filter to remove the remaining aerosols, an activated carbon filter to remove the DMSO vapor, and a final HEPA filter to meet the redundancy requirement for HEPA filters in radioactive applications. The demister pad is a 4{double_prime} thick mat of glass and steel fibers and was selected after conducting screening tests on promising candidates. We also conducted screening tests on various activated carbons and found that all had a similar performance. The carbon breakthrough curves were fitted to a modified Wheeler`s equation and gave excellent predictions for the effect of different flow rates. After all of the components were assembled, we ran a series of performance tests on the components and system to determine the particle capture efficiency as a function of size for dioctyl sebacate (DOS) and DMSO aerosols using laser particle counters and filter samples. The pad had an efficiency greater than 990% for 0.1 {mu}m DMSO particles. Test results on the prototype carbon filter showed only 70% efficiency, instead of the 99.9% in small scale laboratory tests. Thus further work will be required to develop the prototype carbon filter. 7 refs., 18 figs., 10 tabs.

  10. Fiber Bragg sensing of high explosive detonation experiments at Los Alamos National Laboratory

    Science.gov (United States)

    Rodriguez, G.; Sandberg, R. L.; Jackson, S. I.; Vincent, S. W.; Gilbertson, S. M.; Udd, E.

    2014-05-01

    An all optical-fiber-based approach to measuring high explosive detonation front position and velocity is demonstrated. By measuring total light return using an incoherent light source reflected from a fiber Bragg grating sensor in contact with the explosive, dynamic mapping of the detonation front position and velocity versus time is obtained. We demonstrate two examples of detonation front measurements: PETN detasheet test and detonation along a multi-HE cylindrical rate stick containing sections of PBX 9501, Comp B, TNT, PBX 9407, PBX 9520, and inert PMMA. In the PETN detasheet measurement, excellent agreement with complementary diagnostics (electrical pins) is achieved, with accuracy in the detonation front velocity at the 0.13% level when compared to the results from the pin data.

  11. 3-D high-speed imaging of volcanic bomb trajectory in basaltic explosive eruptions

    Science.gov (United States)

    Gaudin, D.; Taddeucci, J; Houghton, Bruce F.; Orr, Tim R.; Andronico, D.; Del Bello, E.; Kueppers, U.; Ricci, T.; Scarlato, P.

    2016-01-01

    Imaging, in general, and high speed imaging in particular are important emerging tools for the study of explosive volcanic eruptions. However, traditional 2-D video observations cannot measure volcanic ejecta motion toward and away from the camera, strongly hindering our capability to fully determine crucial hazard-related parameters such as explosion directionality and pyroclasts' absolute velocity. In this paper, we use up to three synchronized high-speed cameras to reconstruct pyroclasts trajectories in three dimensions. Classical stereographic techniques are adapted to overcome the difficult observation conditions of active volcanic vents, including the large number of overlapping pyroclasts which may change shape in flight, variable lighting and clouding conditions, and lack of direct access to the target. In particular, we use a laser rangefinder to measure the geometry of the filming setup and manually track pyroclasts on the videos. This method reduces uncertainties to 10° in azimuth and dip angle of the pyroclasts, and down to 20% in the absolute velocity estimation. We demonstrate the potential of this approach by three examples: the development of an explosion at Stromboli, a bubble burst at Halema'uma'u lava lake, and an in-flight collision between two bombs at Stromboli.

  12. Hydrodynamic Modeling of Air Blast Propagation from the Humble Redwood Chemical High Explosive Detonations Using GEODYN

    Energy Technology Data Exchange (ETDEWEB)

    Chipman, V D

    2011-09-20

    Two-dimensional axisymmetric hydrodynamic models were developed using GEODYN to simulate the propagation of air blasts resulting from a series of high explosive detonations conducted at Kirtland Air Force Base in August and September of 2007. Dubbed Humble Redwood I (HR-1), these near-surface chemical high explosive detonations consisted of seven shots of varying height or depth of burst. Each shot was simulated numerically using GEODYN. An adaptive mesh refinement scheme based on air pressure gradients was employed such that the mesh refinement tracked the advancing shock front where sharp discontinuities existed in the state variables, but allowed the mesh to sufficiently relax behind the shock front for runtime efficiency. Comparisons of overpressure, sound speed, and positive phase impulse from the GEODYN simulations were made to the recorded data taken from each HR-1 shot. Where the detonations occurred above ground or were shallowly buried (no deeper than 1 m), the GEODYN model was able to simulate the sound speeds, peak overpressures, and positive phase impulses to within approximately 1%, 23%, and 6%, respectively, of the actual recorded data, supporting the use of numerical simulation of the air blast as a forensic tool in determining the yield of an otherwise unknown explosion.

  13. Determining the Coalescence of Hotspots into Uniform Detonation Fronts in High Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Steward, G. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Purdue Univ., West Lafayette, IN (United States); Mays, R. O. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Converse, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Baluyot, E. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Tringe, J. W. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Kane, R. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-08-14

    Microwave Interferometry (MI) offers the advantage of a continuous time measurement of detonation front velocity from detonation initiation to disassembly, which is an important step to assure the quality of stockpile high explosives. However, the method is currently characterized by areas of poor signal strength, which lead to low confidence measurements. Experiments in inert materials were conducted to determine if reflective hot spots, pockets of plasma that form during detonation, are responsible due to varying hot spot concentrations. Instead, it was found that the copper tube used in a range of standard HE test configurations is the cause of the poor signal reception. Hot spots were represented by microwave reflective aluminum particles. The aluminum was mixed with Titanium Dioxide, a material electrically similar to the insensitive high explosive, triaminotrinitrobenzene (TATB), in volume percent fractions (VPFs) between 0 and 100% aluminum, in increments of 10%. Reflectivity was measured based on input and reflection received from a test apparatus with a layer representing undetonated explosive and another representing an approaching shockwave. The results showed no correlation between VPF and measured reflectivity test cases while enclosed in the standard copper tube. Upon further testing, each sample’s measured reflectivity independent of the copper enclosure did correlate with VPF. This revealed that the test enclosure currently used for MI measurements is causing poor MI signal reception, and new methods must be developed to account for this aberration in MI measurements.

  14. Metallurgical applications of shock wave and high strain rate phenomena

    Energy Technology Data Exchange (ETDEWEB)

    Murr, L.E.; Staudhammer, K.P.; Meyers, M.A.

    1986-01-01

    This book presents the papers given at a conference on the impact testing of metals. Topics considered at the conference included dynamic consolidation, the analysis of dislocation kinetics across shocks, high-strain-rate deformation, adiabatic shear band phenomena, dynamic fracture, explosive metal working, shock synthesis and the property modification of materials, and novel concepts and applications of high pressure.

  15. A Safer Nuclear Enterprise - Application to Nuclear Explosive Safety (NES)(U)

    Energy Technology Data Exchange (ETDEWEB)

    Morris, Tommy J. [Los Alamos National Laboratory

    2012-07-05

    Activities and infrastructure that support nuclear weapons are facing significant challenges. Despite an admirable record and firm commitment to make safety a primary criterion in weapons design, production, handling, and deployment - there is growing apprehension about terrorist acquiring weapons or nuclear material. At the NES Workshop in May 2012, Scott Sagan, who is a proponent of the normal accident cycle, presented. Whether a proponent of the normal accident cycle or High Reliability Organizations - we have to be diligent about our safety record. Constant vigilance is necessary to maintain our admirable safety record and commitment to Nuclear Explosive Safety.

  16. High-current electron gun with a planar magnetron integrated with an explosive-emission cathode

    Science.gov (United States)

    Kiziridi, P. P.; Ozur, G. E.

    2017-05-01

    A new high-current electron gun with plasma anode and explosive-emission cathode integrated with planar pulsed powered magnetron is described. Five hundred twelve copper wires 1 mm in diameter and 15 mm in height serve as emitters. These emitters are installed on stainless steel disc (substrate) with 3-mm distance between them. Magnetron discharge plasma provides increased ion density on the periphery of plasma anode formed by high-current Penning discharge ignited within several milliseconds after starting of the magnetron discharge. The increased on the periphery ion density improves the uniformity of high-current electron beam produced in such an electron gun.

  17. VISAR Validation Test Series at the Light Initiated High Explosive (LIHE) facility.

    Energy Technology Data Exchange (ETDEWEB)

    Covert, Timothy Todd

    2007-02-01

    A velocity interferometer system for any reflector (VISAR) was recently deployed at the light initiated high explosive facility (LIHE) to measure the velocity of an explosively accelerated flyer plate. The velocity data from the flyer plate experiments, using the vendor's fringe constant of 100m/s/fringe, were consistently lower than model predictions. The goal of the VISAR validation test series was to confirm the VISAR system fringe constant. A low velocity gas gun was utilized to impact and accelerate a target at the LIHE facility. VISAR velocity data from the accelerated target was compared against an independent velocity measurement. The data from this test series did in fact reveal the fringe constant was significantly higher than the vendor's specification. The correct fringe constant for the LIHE VISAR system has been determined to be 123 m/s/fringe. The Light Initiated High Explosive (LIHE) facility recently completed a Phase I test series to develop an explosively accelerated flyer plate (X-Flyer). The X-Flyer impulse technique consists of first spraying a thin layer of silver acetylide silver nitrate explosive onto a thin flyer plate. The explosive is then initiated using an intense flash of light. The explosive detonation accelerates the flyer across a small air gap towards the test item. The impact of the flyer with the test item creates a shock pulse and an impulsive load in the test unit. The goal of Phase I of the X-Flyer development series was to validate the technique theory and design process. One of the key parameters that control the shock pulse and impulsive load is the velocity of the flyer at impact. To measure this key parameter, a velocity interferometer system for any reflector (VISAR) was deployed at the LIHE facility. The VISAR system was assembled by Sandia personnel from the Explosive Projects and Diagnostics department. The VISAR was a three leg, push-pull system using a fixed delay cavity. The primary optical components

  18. Photographic study of channel effect in emulsion explosives using a high-speed framing camera

    Science.gov (United States)

    Sumiya, Fumihiko; Hirosaki, Yoshikazu; Kato, Yukio; Ogata, Yuji; Wada, Yuji; Katsuyama, Kunihisa

    1997-12-01

    The precursor air shock wave (PAS), which is propagating ahead of the detonation front in air channel, precompresses and desensitizes the unreacted explosive charges. In some conditions, the PAS causes detonation failure. This phenomenon is known as the channel effect. To investigate the mechanism of the channel effect in emulsion explosives, some experimental works have been carried out using high-speed framing camera. The results of photographic observation at the first experiments demonstrated that the difference between PAS velocity and detonation velocity was the primary factor for the channel effect. It is assumed that the decrease of the PAS velocity can prevent the channel effect. The increase of surface roughness of inner wall was adopted to decrease the PAS velocity. Some experiments were conducted to investigate the effects of surface roughness on the PAS velocity and the detonation propagation. Photographic observations were performed using rectangular tubes with sandpaper on inner ceiling wall to simulate surface roughness under various conditions. The experimental results indicate that the increase of surface roughness reduces the PAS velocity and prevents detonation failure. It is concluded that the surface roughness of wall has a great influence on detonation propagation in emulsion explosive.

  19. Application of Fenton's reaction to steam explosion prehydrolysates from poplar biomass.

    Science.gov (United States)

    Oliva, J M; Manzanares, P; Ballesteros, I; Negro, M J; González, A; Ballesteros, M

    2005-01-01

    The application of Fenton's reaction to enhance the fermentability of prehydrolysates obtained from steam explosion pretreatment of poplar biomass was studied. Reaction conditions of temperature and H2O2 and Fe(II) concentrations were studied. The fermentability of prehydrolysate treated by Fenton's reaction was tested by using different inoculum sizes of thermotolerant strain Kluyveromyces marxianus CECT 10875. The highest percentages of toxic compound degradation (ranging from 71 to 93% removal) were obtained at the highest H2O2 concentration tested (50 mM). However, a negative effect on fermentability was observed at this H2O2 concentration at the lower inoculum loading. An increase in inoculum size to 0.6 g/L resulted in an enhanced ethanol fermentation yield of 95% relative to control.

  20. Application of solvent microextraction to the analysis of nitroaromatic explosives in water samples.

    Science.gov (United States)

    Psillakis, E; Kalogerakis, N

    2001-01-12

    The application of solvent microextraction to the analysis of nitroaromatic explosives is presented. Extraction of 11 nitroaromatics was achieved by suspending 1 microl of organic solvent to the tip of a microsyringe in a stirred aqueous solution. Parameters such as extraction solvent, stirring rate, salt concentration and sampling time were studied and optimized. The limits of detection using bench-top quadrupole mass spectrometry and short extraction times (15 min) were found to be between 0.08 and 1.3 microg/l and the relative standard deviations ranged between 4.3 and 9.8%. Although precision and accuracy of quantification of the method are still needed, solvent microextraction proved to be a fast, simple and inexpensive tool for preconcentration and matrix isolation of nitroaromatics on a microscale.

  1. Capabilities for high explosive pulsed power research at Los Alamos National Laboratory

    Energy Technology Data Exchange (ETDEWEB)

    Goforth, James H [Los Alamos National Laboratory; Oona, Henn [Los Alamos National Laboratory; Tasker, Douglas G [Los Alamos National Laboratory; Kaul, A M [Los Alamos National Laboratory

    2008-01-01

    Research on topics requiring high magnetic fields and high currents have been pursued using high explosive pulsed power (HEPP) techniques since the 1950s at Los Alamos National Laboratory. We have developed many sophisticated HEPr systems through the years, and most of them depend on technology available from the nuclear weapons program. Through the 1980s and 1990s, our budgets would sustain parallel efforts in zpinch research using both HEPr and capacitor banks. In recent years, many changes have occurred that are driven by concerns such as safety, security, and environment, as well as reduced budgets and downsizing of the National Nuclear Security Administration (NNSA) complex due to the end of the cold war era. In this paper, we review the teclmiques developed to date, and adaptations that are driven by changes in budgets and our changing complex. One new Ranchero-based solid liner z-pinch experimental design is also presented. Explosives that are cast to shape instead of being machined, and initiation systems that depend on arrays of slapper detonators are important new tools. Some materials that are seen as hazardous to the environment are avoided in designs. The process continues to allow a wide range of research however, and there are few, if any, experiments that we have done in the past that could not be perform today. The HErr firing facility at Los Alamos continues to have a 2000 lb. high explosive limit, and our 2.4 MJ capacitor bank remains a mainstay of the effort. Modem diagnostic and data analysis capabilities allow fewer personnel to achieve better results, and in the broad sense we continue to have a robust capability.

  2. Contribution of Neutron Beta Decay to Radiation Belt Pumping from High Altitude Nuclear Explosion

    Energy Technology Data Exchange (ETDEWEB)

    Marrs, R

    2002-11-13

    In 1962, several satellites were lost following high altitude nuclear tests by the United States and the Soviet Union. These satellite failures were caused by energetic electrons injected into the earth's radiation belts from the beta decay of bomb produced fission fragments and neutrons. It has been 40 years since the last high altitude nuclear test; there are now many more satellites in orbit, and it is important to understand their vulnerability to radiation belt pumping from nuclear explosions at high altitude or in space. This report presents the results of a calculation of the contribution of neutron beta decay to artificial belt pumping. For most high altitude nuclear explosions, neutrons are expected to make a smaller contribution than fission products to the total trapped electron inventory, and their contribution is usually neglected. However, the neutron contribution may dominate in cases where the fission product contribution is suppressed due to the altitude or geomagnetic latitude of the nuclear explosion, and for regions of the radiation belts with field lines far from the detonation point. In any case, an accurate model of belt pumping from high altitude nuclear explosions, and a self-consistent explanation of the 1962 data, require inclusion of the neutron contribution. One recent analysis of satellite measurements of electron flux from the 1962 tests found that a better fit to the data is obtained if the neutron contribution to the trapped electron inventory was larger than that of the fission products [l]. Belt pumping from high altitude nuclear explosions is a complicated process. Fission fragments are dispersed as part of the ionized bomb debris, which is constrained and guided by the earth's magnetic field. Those fission products that beta decay before being lost to the earth's atmosphere can contribute trapped energetic electrons to the earth's radiation belts. There has been a large effort to develop computer models for

  3. Development of highly sensitive and selective antibodies for the detection of the explosive pentaerythritol tetranitrate (PETN) by bioisosteric replacement.

    Science.gov (United States)

    Hesse, Almut; Biyikal, Mustafa; Rurack, Knut; Weller, Michael G

    2016-02-01

    An improved antibody against the explosive pentaerythritol tetranitrate (PETN) was developed. The immunogen was designed by the concept of bioisosteric replacement, which led to an excellent polyclonal antibody with extreme selectivity and immunoassays of very good sensitivity. Compounds such as nitroglycerine, 2,4,6-trinitrotoluene, 1,3,5-trinitrobenzene, hexogen (RDX), 2,4,6-trinitroaniline, 1,3-dinitrobenzene, octogen (HMX), triacetone triperoxide, ammonium nitrate, 2,4,6-trinitrophenol and nitrobenzene were tested for potential cross-reactivity. The detection limit of a competitive enzyme-linked immunosorbent assay was determined to be around 0.5 µg/l. The dynamic range of the assay was found to be between 1 and 1000 µg/l, covering a concentration range of three decades. This work shows the successful application of the bioisosteric concept in immunochemistry by exchange of a nitroester to a carbonate diester. The antiserum might be used for the development of quick tests, biosensors, microtitration plate immunoassays, microarrays and other analytical methods for the highly sensitive detection of PETN, an explosive frequently used by terrorists, exploiting the extreme difficulty of its detection. Copyright © 2015 John Wiley & Sons, Ltd.

  4. Initial characterization of a highly contaminated high explosives outfall in preparation for in situ bioremediation

    Energy Technology Data Exchange (ETDEWEB)

    Betty A. Strietelmeier; Patrick J. Coyne; Patricia A. Leonard; W. Lamar Miller; Jerry R. Brian

    1999-12-01

    In situ bioremediation is a viable, cost-effective treatment for environmental contamination of many kinds. The feasibility of using biological techniques to remediate soils contaminated with high explosives (HE) requires laboratory evaluation before proceeding to a larger scale field operation. Laboratory investigations have been conducted at pilot scale which indicate that an anaerobic process could be successful at reducing levels of HE, primarily HMX, RDX and TNT, in contaminated soils. A field demonstration project has been designed to create an anaerobic environment for the degradation of HE materials. The first step in this project, initial characterization of the test area, was conducted and is the subject of this report. The levels of HE compounds found in the samples from the test area were higher than the EPA Method 8330 was able to extract without subsequent re-precipitation; therefore, a new method was developed using a superior extractant system. The test area sampling design was relatively simple as one might expect in an initial characterization. A total of 60 samples were each removed to a depth of 4 inches using a 1 inch diameter corer. The samples were spaced at relatively even intervals across a 20 foot cross-section through the middle of four 7-foot-long adjacent plots which are designed to be a part of an in situ bioremediation experiment. Duplicate cores were taken from each location for HE extraction and analysis in order to demonstrate and measure the heterogeneity of the contamination. Each soil sample was air dried and ball-milled to provide a homogeneous solid for extraction and analysis. Several samples had large consolidated pieces of what appeared to be solid HE. These were not ball-milled due to safety concerns, but were dissolved and the solutions were analyzed. The new extraction method was superior in that results obtained for several of the contaminants were up to 20 times those obtained with the EPA extraction method. The

  5. Application of Receiver Operating Characteristic (ROC Curves for Explosives Detection Using Different Sampling and Detection Techniques

    Directory of Open Access Journals (Sweden)

    Mimy Young

    2013-12-01

    Full Text Available Reported for the first time are receiver operating characteristic (ROC curves constructed to describe the performance of a sorbent-coated disk, planar solid phase microextraction (PSPME unit for non-contact sampling of a variety of volatiles. The PSPME is coupled to ion mobility spectrometers (IMSs for the detection of volatile chemical markers associated with the presence of smokeless powders, model systems of explosives containing diphenylamine (DPA, 2,4-dinitrotoluene (2,4-DNT and nitroglycerin (NG as the target analytes. The performance of the PSPME-IMS was compared with the widely accepted solid-phase microextraction (SPME, coupled to a GC-MS. A set of optimized sampling conditions for different volume containers (1–45 L with various sample amounts of explosives, were studied in replicates (n = 30 to determine the true positive rates (TPR and false positive detection rates (FPR for the different scenarios. These studies were obtained in order to construct the ROC curves for two IMS instruments (a bench-top and field-portable system and a bench top GC-MS system in low and high clutter environments. Both static and dynamic PSPME sampling were studied in which 10–500 mg quantities of smokeless powders were detected within 10 min of static sampling and 1 min of dynamic sampling.

  6. High Temperature Perforating System for Geothermal Applications

    Energy Technology Data Exchange (ETDEWEB)

    Smart, Moises E. [Schlumberger Technology Corporation, Sugar Land, TX (United States)

    2017-02-28

    The objective of this project is to develop a perforating system consisting of all the explosive components and hardware, capable of reliable performance in high temperatures geothermal wells (>200 ºC). In this light we will focused on engineering development of these components, characterization of the explosive raw powder and developing the internal infrastructure to increase the production of the explosive from laboratory scale to industrial scale.

  7. Simulation of changes in temperature and pressure fields during high speed projectiles forming by explosion

    National Research Council Canada - National Science Library

    Marković Miloš D; Milinović Momčilo P; Jeremić Olivera M; Jaramaz Slobodan S

    2016-01-01

    The Research in this paper considered the temperatures fields as the consequently influenced effects appeared by plastic deformation, in the explosively forming process aimed to design Explosively Formed Projectiles (henceforth EFP...

  8. Numerical Simulation and Experimental Study on Formation of High Concentration of H2 Generated by Gas Explosion

    OpenAIRE

    Lei Baiwei; Wu Bing; Zhao Yatong; Ashraf Muhammad Aqeel

    2016-01-01

    In coal mine fire rescues, if the abnormal increase of gas concentration occurs, it is the primary thing to analyze the reasons and identify sources of the abnormal forming, which is also the basis of judge the combustion state of fire area and formulate proper fire reliefs. Nowadays, related researches have recognized the methane explosion as the source of high concentration of H2 formation, but there are few studies about the conditions and reaction mechanism of gas explosion generating hig...

  9. Material Response Models and Ground Motion Calculations for High Explosive Tests in G-Tunnel Tuff.

    Science.gov (United States)

    1984-01-25

    through the use of a viscoelastic model in the form of a standard linear solid. 2.2 PHYSICAL PROPERTIES Physical properties from five G- Tunnel , U12G -OT...34Determination of In Situ Stress in U12g Tunnel , Rainier Mesa, Nevada Test Site, Nevada,’ U.S. Geological Survey, USGS-474-219, January 1976. 7. Patch, D. F...A -’"’- "’ " [ N • HilM61 AD-A151 737 DNA-TR-84-124 MATERIAL RESPONSE MODELS AND GROUND MOTION CALCULATIONS FOR HIGH EXPLOSIVE TESTS IN G- TUNNEL TUFF

  10. Highly sensitive detection of explosive triacetone triperoxide by an In2O3 sensor

    Science.gov (United States)

    Zhang, Wen-Hui; Zhang, Wei-De; Chen, Lu-Ya

    2010-08-01

    Triacetone triperoxide (TATP) is one of the most sensitive known explosives and can be easily synthesized using the commonly available chemicals acetone and hydrogen peroxide, but is difficult to be detected. In this study, In2O3 nanoparticles were synthesized by a glucose-assisted solvothermal method at 120 °C for 18 h. The gas sensor based on In2O3 nanoparticles exhibits a high response, fast response and recovery, a wide detecting range of 0.50-500 mg, good stability and excellent stability to TATP.

  11. Effects of High Intensity Interval Training on Increasing Explosive Power, Speed, and Agility

    Science.gov (United States)

    Fajrin, F.; Kusnanik, N. W.; Wijono

    2018-01-01

    High Intensity Interval Training (HIIT) is a type of exercise that combines high-intensity exercise and low intensity exercise in a certain time interval. This type of training is very effective and efficient to improve the physical components. The process of improving athletes achievement related to how the process of improving the physical components, so the selection of a good practice method will be very helpful. This study aims to analyze how is the effects of HIIT on increasing explosive power, speed, and agility. This type of research is quantitative with quasi-experimental methods. The design of this study used the Matching-Only Design, with data analysis using the t-test (paired sample t-test). After being given the treatment for six weeks, the results showed there are significant increasing in explosive power, speed, and agility. HIIT in this study used a form of exercise plyometric as high-intensity exercise and jogging as mild or moderate intensity exercise. Increase was due to the improvement of neuromuscular characteristics that affect the increase in muscle strength and performance. From the data analysis, researchers concluded that, Exercises of High Intensity Interval Training significantly effect on the increase in Power Limbs, speed, and agility.

  12. High explosives vapor detection by atmospheric sampling glow discharge ionization/tandem mass spectrometry

    Energy Technology Data Exchange (ETDEWEB)

    McLuckey, S.A.; Goeringer, D.E.; Asano, K.G. [Oak Ridge National Lab., TN (United States). Chemical and Analytical Sciences Div.

    1996-02-01

    The combination of atmospheric sampling glow discharge ionization with tandem mass spectrometry for the detection of traces of high explosives is described. Particular emphasis is placed on use of the quadrupole ion trap as the type of tandem mass spectrometer. Atmospheric sampling glow discharge provides a simple, rugged, and efficient means for anion formation while the quadrupole ion trap provides for efficient tandem mass spectrometry. Mass selective ion accumulation and non-specific ion activation methods can be used to overcome deleterious effects arising from ion/ion interactions. Such interactions constitute the major potential technical barrier to the use of the ion trap for real-time monitoring of targeted compounds in uncontrolled and highly variable matrices. Tailored waveforms can be used to effect both mass selective ion accumulation and ion activation. Concatenated tailored waveforms allow for both functions in a single experiment thereby providing the capability for monitoring several targeted species simultaneously. The combination of atmospheric sampling glow discharge ionization with a state-of-the-art analytical quadrupole ion trap is a highly sensitive and specific detector for traces of high explosives. The combination is also small and inexpensive relative to virtually any other form of tandem mass spectrometry. The science and technology underlying the glow discharge/ion trap combination is sufficiently mature to form the basis for an engineering effort to make the detector portable. 85 refs.

  13. Photographic measurement of the detonation velocity of explosives by high-speed camera and its comparison with other methods

    Science.gov (United States)

    Ogata, Yuji; Wada, Yuji; Katsuyama, Kunihisa; Ma, Gui-Chen

    1995-05-01

    It is important to measure the detonation velocity of the explosives for considering the detonation performance of explosives. In this paper the Dautriche test method and the resistance wire method were carried out to measure the detonation velocity of explosives and observed these measuring method by high-speed camera at the same time. The results by two measuring methods were compared with each other. In the Dautriche test method the propagation and the collision of detonation of detonating fuse on the lead plate can be observed with high-speed camera. In the resistance wire method the detonation velocity of explosives was measured continuously. But there was delay time caused by the short circuit between the resistance wire and the stainless tube. The delay time was compared with the observation results of high-speed camera. It took a few microsecond(s) to generate the short circuit between the stainless tube and the resistance wire. The sample explosives which were measures with three kinds of methods was same kind of emulsion slurry explosives. The detonation velocity indicated same value on all kinds of methods.

  14. Explosive signatures: Pre & post blast

    Science.gov (United States)

    Bernier, Evan Thomas

    Manuscripts 1 and 2 of this dissertation both involve the pre-blast detection of trace explosive material. The first manuscript explores the analysis of human hair as an indicator of exposure to explosives. Field analysis of hair for trace explosives is quick and non-invasive, and could prove to be a powerful linkage to physical evidence in the form of bulk explosive material. Individuals tested were involved in studies which required handling or close proximity to bulk high explosives such as TNT, PETN, and RDX. The second manuscript reports the results of research in the design and application of canine training aids for non-traditional, peroxide-based explosives. Organic peroxides such as triacetonetriperoxide (TATP) and hexamethylenetriperoxidediamine (HMTD) can be synthesized relatively easily with store-bought ingredients and have become popular improvised explosives with many terrorist groups. Due to the hazards of handling such sensitive compounds, this research established methods for preparing training aids which contained safe quantities of TATP and HMTD for use in imprinting canines with their characteristic odor. Manuscripts 3 and 4 of this dissertation focus on research conducted to characterize pipe bombs during and after an explosion (post-blast). Pipe bombs represent a large percentage of domestic devices encountered by law enforcement. The current project has involved the preparation and controlled explosion of over 90 pipe bombs of different configurations in order to obtain data on fragmentation patterns, fragment velocity, blast overpressure, and fragmentation distance. Physical data recorded from the collected fragments, such as mass, size, and thickness, was correlated with the relative power of the initial device. Manuscript 4 explores the microstructural analysis of select pipe bomb fragments. Shock-loading of the pipe steel led to plastic deformation and work hardening in the steel grain structure as evidenced by optical microscopy and

  15. High voltage pulses for high impedance loads using explosive formed fuses

    Energy Technology Data Exchange (ETDEWEB)

    Degnan, J.H.; Kiuttu, G.F.; Turchi, P.J. [Air Force Research Labs., Kirtland AFB, NM (United States). Phillips Research Site; Goforth, J.H.; Lopez, E.A.; Oona, H.; Tasker, D.G. [Los Alamos National Lab., NM (United States); Graham, J.D.

    1998-10-01

    Explosive formed fuses (EFF`s) use conducting elements that are deformed by explosive pressure (typically, against dielectric dies). This causes the fuse geometry to change, so that the conducting element cross section decreases. This enables a higher ratio of current conduction to current interrupt time than for normal fuses, and it enables more control of when current interruption occurs. In combination with a suitable output closing switch, EFF`s can be used to obtain several hundred kilovolt voltage pulses from inductive stores to drive several ohm loads. With proper choices of inductive store, EFF geometry and material, and output closing switch features, such a voltage pulse can be approximately flat topped for microsecond duration and have a small fraction of microsecond risetime. The authors present theoretical analysis and circuit simulations which illustrate this, using scaled empirical EFF parameters for inductive stores in the 1 weber flux, several hundred nanohenry range. The circuit simulations were done using MicroCap-IV, with user defined elements. These simulations were done with static inductive stores and with explosive magnetic flux compression generators driving inductive stores.

  16. The Plumbing System of a Highly Explosive Basaltic Volcano: Sunset Crater, AZ

    Science.gov (United States)

    Allison, C. M.; Roggensack, K.; Clarke, A. B.

    2015-12-01

    We seek to better understand highly explosive basaltic eruptions with specific focus on magmatic volatile solubility in alkali basalts and the magma plumbing system. Sunset Crater, an alkali basalt (~3.7 wt.% alkalis) scoria cone volcano, erupted explosively in 1085 AD. We analyzed 125 primary melt inclusions (MIs) from Sunset Crater tephra deposited by 2 subplinian phases and 1 Strombolian explosion to compare magma volatiles and storage conditions. We picked rapidly quenched free olivine crystals and selected large volume MIs (50-180 μm) located toward crystal cores. MIs are faceted and exhibit little major element composition variability with minor post entrapment crystallization (2-10%). MIs are relatively dry but CO2-rich. Water content varies from 0.4 wt.% to 1.5 wt.% while carbon dioxide abundance ranges between 1,150 ppm and 3,250 ppm. Most MIs contain >1 wt.% H2O and >2,150 ppm CO2. All observed MIs contain a vapor bubble, so we are evaluating MI vapor bubbles with Raman spectroscopy and re-homogenization experiments to determine the full volatile budget. Because knowledge of volatile solubility is critical to accurately interpret results from MI analyses, we measured H2O-CO2 solubility in the Sunset Crater bulk composition. Fluid-saturated experiments at 4 and 6 kbar indicate shallower entrapment pressures for these MIs than values calculated for this composition using existing models. Assuming fluid saturation, MIs record depths from 6 km to 14 km, including groupings suggesting two pauses for longer-term storage at ~6 km and ~10.5 km. We do not observe any significant differences in MIs from phases exhibiting different eruptive styles, suggesting that while a high CO2 content may drive rapid magma ascent and be partly responsible for highly explosive eruptions, shallower processes may govern the final eruptive character. To track shallow processes during magma ascent from depth of MI-entrapment up to the surface, we are examining MI re-entrants.

  17. In-situ Raman spectroscopy and high-speed photography of a shocked triaminotrinitrobenzene based explosive

    Science.gov (United States)

    Saint-Amans, C.; Hébert, P.; Doucet, M.; de Resseguier, T.

    2015-01-01

    We have developed a single-shot Raman spectroscopy experiment to study at the molecular level the initiation mechanisms that can lead to sustained detonation of a triaminotrinitrobenzene-based explosive. Shocks up to 30 GPa were generated using a two-stage laser-driven flyer plate generator. The samples were confined by an optical window and shock pressure was maintained for at least 30 ns. Photon Doppler Velocimetry measurements were performed at the explosive/window interface to determine the shock pressure profile. Raman spectra were recorded as a function of shock pressure and the shifts of the principal modes were compared to static high-pressure measurements performed in a diamond anvil cell. Our shock data indicate the role of temperature effects. Our Raman spectra also show a progressive extinction of the signal which disappears around 9 GPa. High-speed photography images reveal a simultaneous progressive darkening of the sample surface up to total opacity at 9 GPa. Reflectivity measurements under shock compression show that this opacity is due to a broadening of the absorption spectrum over the entire visible region.

  18. Multi-scale modeling of phase explosion in high fluence nanosecond laser ablation and clarification of ablation depth prediction criterion

    Energy Technology Data Exchange (ETDEWEB)

    Cao, Yunfeng; Shin, Yung C., E-mail: shin@purdue.edu

    2015-12-01

    Graphical abstract: - Highlights: • ns laser ablation of aluminum and copper with phase explosion is investigated. • Melt ejection behavior is successfully predicted through a HD/MD/SPH model. • 0.9T{sub c} does not always work for all materials for ablation depth prediction. • 0.75–0.8T{sub c} works better for copper in predicting ablation depth. - Abstract: When phase explosion occurs, accurate prediction of the ablation behavior in the high energy nanosecond laser ablation process still remains a difficult challenge. In this paper, nanosecond laser ablation of aluminum and copper with phase explosion is investigated through a multi-scale model and experimental verification. The melt ejection behavior during phase explosion is successfully predicted by combined molecular dynamics (MD) and smoothed particle hydrodynamics (SPH) simulations and validated against the experiments. The commonly adopted 0.9T{sub c} (critical temperature) criterion for phase explosion boundary is also assessed with the prediction of the ablation depth for both aluminum and copper, and it is found that the 0.9T{sub c} criterion does not always work. The multi-scale model developed in this work is shown to have better capability in predicting the ablation behavior when phase explosion is involved.

  19. Inactivation of food microorganisms by high-pressure carbon dioxide treatment with or without explosive decompression.

    Science.gov (United States)

    Enomoto, A; Nakamura, K; Nagai, K; Hashimoto, T; Hakoda, M

    1997-07-01

    In order to elucidate the sterilization mechanism underlying the explosive decompression system, baker's yeast was pressurized with CO2, N2O, N2, or Ar gas at 40 atm and 40 degrees C for 4h, and then explosively discharged. The survival ratio was markedly decreased only by the treatments with CO2 and N2O, which are relatively soluble gases in water, suggesting that the microorganisms' death may be highly correlated with gas absorption by the cells. Lower decompression rates to atmospheric pressure, however, led to neither any lower reduction of remaining cells nor any smaller release of total cellular proteins. Furthermore, operating with a longer treatment time and smaller number of repetitions was usually more lethal than with a shorter time and more frequent repetition. From these results, most of the yeast cells appear to have been sterilized during the pressurization process. The spore cells of B. megaterium are considered to have been killed in a somewhat different manner, because of their distinct sensitivity to the applied gases.

  20. Enhanced mass removal due to phase explosion during high irradiance nanosecond laser ablation of silicon

    Energy Technology Data Exchange (ETDEWEB)

    Yoo, Jong Hyun [Univ. of California, Berkeley, CA (United States)

    2000-05-01

    The morphology of craters resulting from high irradiance laser ablation of silicon was measured using a white light interferometry microscope. The craters show a dramatic increase in their depth and volume at a certain irradiance, indicating a change in the primary mechanism for mass removal. Laser shadowgraph imaging was used to characterize and differentiate the mass ejection processes for laser irradiances above and below the threshold value. Time-resolved images show distinct features of the mass ejected at irradiances above the threshold value including the presence of micron-sized particulates; this begins at approximately 300 ~ 400 ns after the start of laser heating. The analysis of the phenomena was carried out by using two models: a thermal evaporation model and a phase explosion model. Estimation of the crater depth due to the thermally evaporated mass led to a large underestimation of the crater depth for irradiances above the threshold. Above the threshold irradiance, the possibility of phase explosion was analyzed. Two important results are the thickness of the superheated liquid layer that is close to the critical temperature and the time for vapor bubbles that are generated in the superheated liquid to achieve a critical size. After reaching the critical size, vapor bubbles can grow spontaneously resulting in a violent ejection of liquid droplets from the superheated volume. The effects of an induced transparency, i.e. of liquid silicon turning into an optically transparent liquid dielectric medium, are also introduced. The estimated time for a bubble to reach the critical size is in agreement with the delay time measured for the initiation of large mass ejection. Also, the thickness of the superheated liquid layer that is close to the critical temperature at the time of the beginning of the large mass ejection is representative of the crater depth at the threshold irradiance. These results suggest that phase explosion is a plausible thermal

  1. Intensive evaporation and boiling of a heterogeneous liquid droplet with an explosive disintegration in high-temperature gas area

    Directory of Open Access Journals (Sweden)

    Piskunov Maxim V.

    2016-01-01

    Full Text Available The using of the high-speed (not less than 105 frames per second video recording tools (“Phantom” and the software package ("TEMA Automotive" allowed carrying out an experimental research of laws of intensive vaporization with an explosive disintegration of heterogeneous (with a single solid nontransparent inclusion liquid droplet (by the example of water in high-temperature (500-800 K gases (combustion products. Times of the processes under consideration and stages (liquid heat-up, evaporation from an external surface, bubble boiling at internal interfaces, growth of bubble sizes, explosive droplet breakup were established. Necessary conditions of an explosive vaporization of a heterogeneous droplet were found out. Mechanisms of this process and an influence of properties of liquid and inclusion material on them were determined.

  2. Deflagration Rate Measurements of Three Insensitive High Explosives: LLM-105, TATB, and DAAF

    Energy Technology Data Exchange (ETDEWEB)

    Glascoe, E A; Maienschein, J L; Lorenz, K T; Tan, N; Koerner, J G

    2010-03-08

    The pressure dependent deflagration rates of LLM-105, DAAF and TATB based formulations were measured in the LLNL high pressure strand burner. The role of binder amount, explosive type, and thermal damage and their effects on the deflagration rate will be discussed. One DAAF formulation, two different formulations of LLM-105, and four formulations of TATB were studied; results indicate that binder amount and type play a minor role in the deflagration behavior. This is in sharp contrast to the HMX based formulations which strongly depend on binder amount and type. The effect of preheating these samples was considerably more dramatic. In the case of LLM-105, preheating the sample appears to have little effect on the deflagration rate. In contrast, preheating DAAF and TATB formulations causes the deflagration rate to accelerate. The thermal and mechanical properties of these formulations will be discussed in the context of their pressure and temperature dependent deflagration rates.

  3. Remedial investigation of the High-Explosives (HE) Process Area, Lawrence Livermore National Laboratory Site 300

    Energy Technology Data Exchange (ETDEWEB)

    Crow, N.B.; Lamarre, A.L.

    1990-08-01

    This report presents the results of a Remedial Investigation (RI) to define the extent of high explosives (HE) compounds and volatile organic compounds (VOCs) found in the soil, rocks, and ground water of the HE Process Area of Lawrence Livermore National Laboratory's (LLNL) Site 300 Facility. The report evaluates potential public health environmental risks associated with these compounds. Hydrogeologic information available before February 15, 1990, is included; however, chemical analyses and water-level data are reported through March 1990. This report is intended to assist the California Regional Water Quality Control Board (RWQCB)--Central Valley Region and the US Environmental Protection Agency (EPA) in evaluating the extent of environmental contamination of the LLNL HE Process Area and ultimately in designing remedial actions. 90 refs., 20 figs., 7 tabs.

  4. Fine Tuning the CJ Detonation Speed of a High Explosive products Equation of State

    Energy Technology Data Exchange (ETDEWEB)

    Menikoff, Ralph [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2017-05-12

    For high explosive (HE) simulations, inaccuracies of a per cent or two in the detonation wave speed can result from not suficiently resolving the reaction zone width or from small inaccuracies in calibrating the products equation of state (EOS) or from variation of HE lots. More accurate detonation speeds can be obtained by ne tuning the equation of state to compensate. Here we show that two simple EOS transformations can be used to adjust the CJ detonation speed by a couple of per cent with minimal effect on the CJ release isentrope. The two transformations are (1) a shift in the energy origin and (2) a linear scaling of the speci c volume. The effectiveness of the transformations is demonstrated with simulations of the cylinder test for PBX 9502 starting with a products EOS for which the CJ detonation speed is 1 per cent too low.

  5. High-energy particle acceleration by explosive electromagnetic interaction in an accretion disk

    Science.gov (United States)

    Haswell, C. A.; Tajima, T.; Sakai, J.-I.

    1992-01-01

    By examining electromagnetic field evolution occurring in an accretion disk around a compact object, we arrive at an explosive mechanism of particle acceleration. Flux-freezing in the differentially rotating disk causes the seed and/or generated magnetic field to wrap up tightly, becoming highly sheared and locally predominantly azimuthal in orientation. We show how asymptotically nonlinear solutions for the electromagnetic fields may arise in isolated plasma blobs as a result of the driving of the fluid equations by the accretion flow. These fields are capable of rapidly accelerating charged particles from the disk. Acceleration through the present mechanism from AGN can give rise to energies beyond 10 exp 20 eV. Such a mechanism may present an explanation for the extragalactic origin of the most energetic observed cosmic rays.

  6. Thermal decomposition and kinetics of 2,4-dinitroimidazole: An insensitive high explosive

    Energy Technology Data Exchange (ETDEWEB)

    Anniyappan, M., E-mail: anniorganic@rediffmail.com; Sonawane, S.H.; Pawar, S.J.; Sikder, A.K.

    2015-08-20

    Highlights: • Pure 2,4-dinitroimidazole was prepared by re-crystallization from hot methanol. • A detailed thermal analysis of 2,4-DNI by DSC, TGA, GC–MS and ignition temperature. • Activation energy was calculated for thermal decomposition of 2,4-DNI • Effect of polymeric binder on thermal decomposition of 2,4-DNI were also studied. • Decomposition mechanisms of 2,4-DNI based on EI mass spectra were also described. - Abstract: 2,4-Dinitroimidazole (2,4-DNI) is a novel energetic material with much less sensitive and potential for use as a propellant/insensitive munition (IM) formulations. 2,4-DNI possess high thermal stability and less sensitivity as compared to RDX and HMX which are high explosives extensively used at present. This paper reports a detailed thermal study of 2,4-DNI using various instrumental techniques. The activation energy (E = 205 ± 15 kJ/mol) was calculated from thermal decomposition of 2,4-DNI using DSC at different heating rate. The ignition temperature of pure 2,4-DNI was measured and showed at 285 °C. The TGA experiments demonstrate that 2,4-DNI decomposes in three steps with 92% total weight lose. Moreover, the effect of thermal energy on decomposition of 2,4-DNI in presence of polymeric binders like GAP and HTPB were investigated. Further, decomposition mechanisms of 2,4-DNI based on Electron Impact mass spectra analysis were also reported along with its explosive properties.

  7. Abiotic transformation of high explosives by freshly precipitated iron minerals in aqueous FeII solutions.

    Science.gov (United States)

    Boparai, Hardiljeet K; Comfort, Steve D; Satapanajaru, Tunlawit; Szecsody, Jim E; Grossl, Paul R; Shea, Patrick J

    2010-05-01

    Zerovalent iron barriers have become a viable treatment for field-scale cleanup of various ground water contaminants. While contact with the iron surface is important for contaminant destruction, the interstitial pore water within and near the iron barrier will be laden with aqueous, adsorbed and precipitated Fe(II) phases. These freshly precipitated iron minerals could play an important role in transforming high explosives (HE). Our objective was to determine the transformation of RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine), and TNT (2,4,6-trinitrotoluene) by freshly precipitated iron Fe(II)/Fe(III) minerals. This was accomplished by quantifying the effects of initial Fe(II) concentration, pH, and the presence of aquifer solids (Fe(III) phases) on HE transformation rates. Results showed that at pH 8.2, freshly precipitated iron minerals transformed RDX, HMX, and TNT with reaction rates increasing with increasing Fe(II) concentrations. RDX and HMX transformations in these solutions also increased with increasing pH (5.8-8.55). By contrast, TNT transformation was not influenced by pH (6.85-8.55) except at pH values Geochemical modeling also predicted Fe(II) activity would likely be controlled by green rust and magnetite. These results illustrate the important role freshly precipitated Fe(II)/Fe(III) minerals in aqueous Fe(II) solutions play in the transformation of high explosives.

  8. Dust Explosion Prevention and Mitigation, Status and Developments in Basic Knowledge and in Practical Application

    OpenAIRE

    Eckhoff, Rolf K.

    2009-01-01

    Right from the early days of the process industries, continuous efforts have been made to develop and improve measures for prevention and mitigation of dust explosions in these industries. Nevertheless this hazard continues to threaten industries that manufacture, use and/or handle powders and dusts of a wide range of combustible materials. To improve methods for predicting explosion development in real industrial plant has been one major challenge. Hence, during the last years comprehensive ...

  9. Explosives tester

    Science.gov (United States)

    Haas, Jeffrey S [San Ramon, CA; Howard, Douglas E [Livermore, CA; Eckels, Joel D [Livermore, CA; Nunes, Peter J [Danville, CA

    2011-01-11

    An explosives tester that can be used anywhere as a screening tool by non-technical personnel to determine whether a surface contains explosives. First and second explosives detecting reagent holders and dispensers are provided. A heater is provided for receiving the first and second explosives detecting reagent holders and dispensers.

  10. Optimizing convergence rates of alternating minimization reconstruction algorithms for real-time explosive detection applications

    Science.gov (United States)

    Bosch, Carl; Degirmenci, Soysal; Barlow, Jason; Mesika, Assaf; Politte, David G.; O'Sullivan, Joseph A.

    2016-05-01

    X-ray computed tomography reconstruction for medical, security and industrial applications has evolved through 40 years of experience with rotating gantry scanners using analytic reconstruction techniques such as filtered back projection (FBP). In parallel, research into statistical iterative reconstruction algorithms has evolved to apply to sparse view scanners in nuclear medicine, low data rate scanners in Positron Emission Tomography (PET) [5, 7, 10] and more recently to reduce exposure to ionizing radiation in conventional X-ray CT scanners. Multiple approaches to statistical iterative reconstruction have been developed based primarily on variations of expectation maximization (EM) algorithms. The primary benefit of EM algorithms is the guarantee of convergence that is maintained when iterative corrections are made within the limits of convergent algorithms. The primary disadvantage, however is that strict adherence to correction limits of convergent algorithms extends the number of iterations and ultimate timeline to complete a 3D volumetric reconstruction. Researchers have studied methods to accelerate convergence through more aggressive corrections [1], ordered subsets [1, 3, 4, 9] and spatially variant image updates. In this paper we describe the development of an AM reconstruction algorithm with accelerated convergence for use in a real-time explosive detection application for aviation security. By judiciously applying multiple acceleration techniques and advanced GPU processing architectures, we are able to perform 3D reconstruction of scanned passenger baggage at a rate of 75 slices per second. Analysis of the results on stream of commerce passenger bags demonstrates accelerated convergence by factors of 8 to 15, when comparing images from accelerated and strictly convergent algorithms.

  11. Development of a High-Temperature Two-Component Explosive for Geothermal Stimulation

    Energy Technology Data Exchange (ETDEWEB)

    None

    1978-01-01

    Describes the status of a process that manufactures explosives downhole for injecting into formations. Shows results for oil and gas tests, where flow improvements ranged from 160% to 1300%. At this stage, the project consisted of laboratory tests of a number of explosives for possible use in geothermal dry steam or liquid dominated wells. Report has many pictures and tables. (DJE 2005)

  12. Primary explosives

    Energy Technology Data Exchange (ETDEWEB)

    Matyas, Robert; Pachman, Jiri [Pardubice Univ. (Czech Republic). Faculty of Chemical Technology

    2013-06-01

    The first chapter provides background such as the basics of initiation and differences between requirements on primary explosives used in detonators and igniters. The authors then clarify the influence of physical characteristics on explosive properties, focusing on those properties required for primary explosives. Furthermore, the issue of sensitivity is discussed. All the chapters on particular groups of primary explosives are structured in the same way, including introduction, physical and chemical properties, explosive properties, preparation and documented use.

  13. Laboratory Column Evaluation of High Explosives Attenuation in Grenade Range Soils.

    Science.gov (United States)

    Won, Jongho; Borden, Robert C

    2017-09-01

    High explosives (HEs) deposited on military ranges can leach through the soil and contaminate groundwater. We examined the transport and fate of HEs in laboratory columns containing soils from two hand grenade bays (Bays C and T) and the impact of organic amendments on biodegradation. Soil characteristics were similar; however, Bay C had somewhat higher clay and organic C. Experimental treatments included addition of crude glycerin and lignosulfonate, and parallel control columns. Experimental results showed extensive 2,4,6-trinitrotoluene (TNT) degradation with minimal leaching, consistent with prior batch microcosm results. Amendment addition enhanced TNT degradation in both Bays C and T compared with controls. Although hexahydro-1,3,5-trinitro-1,3,5-triazine (Royal Demolition Explosive, or RDX) did not biodegrade in prior aerobic batch microcosms, 64 to 77% of RDX biodegraded in untreated soil columns with O present in the mobile soil gas. The RDX biodegradation was likely associated with short-term anoxic conditions or anoxic micro-niches. In nearly saturated Bay C columns, RDX removal increased to >92%. Amendment addition to unsaturated Bay T columns increased RDX removal to >86%. In one column, the soil remained anoxic (O < 5% by volume) for about a year after amendment addition, significantly reducing RDX leaching. Nitroso degradation products were produced equivalent to 9 to 39% of the RDX degraded, with most retained in the soil (9-37%) and 0 to 3% in the effluent. These results demonstrate that RDX biodegradation can occur in soils with measurable O, and that amendment addition can reduce RDX leaching by stimulating anaerobic biodegradation. Copyright © by the American Society of Agronomy, Crop Science Society of America, and Soil Science Society of America, Inc.

  14. Experiments with vertically and laterally migrating subsurface explosions with applications to the geology of phreatomagmatic and hydrothermal explosion craters and diatremes

    Science.gov (United States)

    Valentine, Greg A.; Graettinger, Alison H.; Macorps, Élodie; Ross, Pierre-Simon; White, James D. L.; Döhring, Erika; Sonder, Ingo

    2015-03-01

    We present results of experiments that use small chemical explosive charges buried in layered aggregates to simulate the effects of subsurface hydrothermal and phreatomagmatic explosions at varying depths and lateral locations, extending earlier experimental results that changed explosion locations only along a vertical axis. The focus is on the resulting crater size and shape and subcrater structures. Final crater shapes tend to be roughly circular if subsurface explosion epicenters occur within each other's footprints (defined as the plan view area of reference crater produced by a single explosion of a given energy, as predicted by an empirical relationship). Craters are elongate if an epicenter lies somewhat beyond the footprint of the previous explosion, such that their footprints overlap, but if epicenters are too far apart, the footprints do not overlap and separate craters result. Explosions beneath crater walls formed by previous blasts tend to produce inclined (laterally directed) ejecta jets, while those beneath crater centers are vertically focused. Lateral shifting of explosion sites results in mixing of subcrater materials by development of multiple subvertical domains of otherwise pure materials, which progressively break down with repeated blasts, and by ejection and fallback of deeper-seated material that had experienced net upward displacement to very shallow levels by previous explosions. A variably developed collar of material that experienced net downward displacement surrounds the subvertical domains. The results demonstrate key processes related to mixing and ejection of materials from different depths during an eruptive episode at a maar-diatreme volcano as well as at other phreatomagmatic and hydrothermal explosion sites.

  15. Ligand exchange synthesis of organometallic Rh nanoparticles and application in explosive sensing

    Science.gov (United States)

    Srivastav, Amit K.; Agrawal, Bhavesh; Swami, Bhavya; Agrawal, Yadvendra K.; Maity, Prasenjit

    2017-06-01

    Alkyne {phenyl acetylene (PA) and 9-ethynylphenanthrene (EPT)}-ligated Rh nanoparticles ( 1 and 2, respectively) with mean diameter of 1.5 ± 0.2 nm were synthesized via a facile and high-yield biphasic ligand exchange protocol using similar sized ethylene glycol (EG)-stabilized Rh nanoparticles as precursors (EG:Rh). The synthesized organometallic Rh nanoparticles were convincingly characterized using several spectroscopic and microscopic techniques, e.g., Fourier transform infrared spectroscopy (FTIR), proton nuclear magnetic resonance (1H NMR), optical absorption spectroscopy (UV-Vis), photoluminescence spectroscopy (PL), powder X-ray diffraction (PXRD), X-ray photoelectron spectroscopy (XPS), and transmission electron microscope (TEM). We propose that the syntheses mechanism relies on catalytic acetylenic (≡C-H, carbon-hydrogen) bond breaking by EG:Rh followed by strong metal-carbon bond formation with a vinyldiene (>C═C═M) motif. The obtained 1 and 2 showed luminescence property, which arises from ligand structure through intraparticle conjugation. Electron-rich phenanthrene-ligated Rh nanoparticles ( 2) showed good sensing performance for detection of electron deficient nitro-aromatic explosive molecules (NA) in solution phase through luminescence quenching method.

  16. Highly efficient SERS substrate for direct detection of explosive TNT using popcorn-shaped gold nanoparticle-functionalized SWCNT hybrid.

    Science.gov (United States)

    Demeritte, Teresa; Kanchanapally, Rajashekhar; Fan, Zhen; Singh, Anant Kumar; Senapati, Dulal; Dubey, Madan; Zakar, Eugene; Ray, Paresh Chandra

    2012-11-07

    This paper reports for the first time the development of a large-scale SERS substrate from a popcorn-shaped gold nanoparticle-functionalized single walled carbon nanotubes hybrid thin film for the selective and highly sensitive detection of explosive TNT material at a 100 femtomolar (fM) level.

  17. Fabrication of Optical Fiber Mechanical Shock Sensors for the Los Alamos HERT (High Explosive Radio Telemetry) Project

    Energy Technology Data Exchange (ETDEWEB)

    P. E. Klingsporn

    2005-11-14

    This document lists the requirements for the fiber optic mechanical shock sensor for the Los Alamos HERT (High Explosive Radio Telemetry) project and provides detailed process steps for fabricating, testing, and assembling the fiber shock sensors for delivery to Los Alamos.

  18. Simulation of changes in temperature and pressure fields during high speed projectiles forming by explosion

    Directory of Open Access Journals (Sweden)

    Marković Miloš D.

    2016-01-01

    Full Text Available The Research in this paper considered the temperatures fields as the consequently influenced effects appeared by plastic deformation, in the explosively forming process aimed to design Explosively Formed Projectiles (henceforth EFP. As the special payloads of the missiles, used projectiles are packaged as the metal liners, joined with explosive charges, to design explosive propulsion effect. Their final form and velocity during shaping depend on distributed temperatures in explosively driven plastic deformation process. Developed simulation model consider forming process without metal cover of explosive charge, in aim to discover liner’s dynamical correlations of effective plastic strains and temperatures in the unconstrained detonation environment made by payload construction. The temperature fields of the liner’s copper material are considered in time, as the consequence of strain/stress displacements driven by explosion environmental thermodynamically fields of pressures and temperatures. Achieved final velocities and mass loses as the expected EFP performances are estimated regarding their dynamical shaping and thermal gradients behavior vs. effective plastic strains. Performances and parameters are presented vs. process time, numerically simulated by the Autodyne software package. [Projekat Ministarstva nauke Republike Srbije, br. III-47029

  19. Pressure Wave Measurements from Thermal Cook-Off of an HMX Based High Explosive PBX 9501

    Energy Technology Data Exchange (ETDEWEB)

    Garcia, F; Forbes, J W; Tarver, C M; Urtiew, P A; Greenwood, D W; Vandersall, K S

    2001-05-31

    A better understanding of thermal cook-off is important for safe handling and storing explosive devices. A number of safety issues exist about what occurs when a cased explosive thermally cooks off. For example, violence of the events as a function of confinement are important for predictions of collateral damage. This paper demonstrates how adjacent materials can be gauged to measure the resulting pressure wave and how this wave propagates in this adjacent material. The output pulse from the thermal cook-off explosive containing fixture is of obvious interest for assessing many scenarios.

  20. Equations of state for detonation products of high energy PBX explosives

    Energy Technology Data Exchange (ETDEWEB)

    Lee, E. L.; Helm, F. H.; Finger, M.; Walton, J. R.

    1977-08-01

    It has become apparent that the accumulated changes in the analysis of cylinder test data, in the material specifications, and in the hydrodynamic code simulation of the cylinder test necessitated an update of the detonation product EOS description for explosives in common use at LLL. The explosives reviewed are PBX-9404-3, LX-04-1, LX-10-1, LX-14-0 and LX-09-1. In order to maintain the proper relation of predicted performance of these standard explosives, they have been revised as a single set.

  1. Characterization of laser-induced plasmas as a complement to high-explosive large-scale detonations

    Science.gov (United States)

    Kimblin, Clare; Trainham, Rusty; Capelle, Gene A.; Mao, Xianglei; Russo, Richard E.

    2017-09-01

    Experimental investigations into the characteristics of laser-induced plasmas indicate that LIBS provides a relatively inexpensive and easily replicable laboratory technique to isolate and measure reactions germane to understanding aspects of high-explosive detonations under controlled conditions. Spectral signatures and derived physical parameters following laser ablation of aluminum, graphite and laser-sparked air are examined as they relate to those observed following detonation of high explosives and as they relate to shocked air. Laser-induced breakdown spectroscopy (LIBS) reliably correlates reactions involving atomic Al and aluminum monoxide (AlO) with respect to both emission spectra and temperatures, as compared to small- and large-scale high-explosive detonations. Atomic Al and AlO resulting from laser ablation and a cited small-scale study, decay within ˜10-5 s, roughly 100 times faster than the Al and AlO decay rates (˜10-3 s) observed following the large-scale detonation of an Al-encased explosive. Temperatures and species produced in laser-sparked air are compared to those produced with laser ablated graphite in air. With graphite present, CN is dominant relative to N2+. In studies where the height of the ablating laser's focus was altered relative to the surface of the graphite substrate, CN concentration was found to decrease with laser focus below the graphite surface, indicating that laser intensity is a critical factor in the production of CN, via reactive nitrogen.

  2. Characterization of laser-induced plasmas as a complement to high-explosive large-scale detonations

    Directory of Open Access Journals (Sweden)

    Clare Kimblin

    2017-09-01

    Full Text Available Experimental investigations into the characteristics of laser-induced plasmas indicate that LIBS provides a relatively inexpensive and easily replicable laboratory technique to isolate and measure reactions germane to understanding aspects of high-explosive detonations under controlled conditions. Spectral signatures and derived physical parameters following laser ablation of aluminum, graphite and laser-sparked air are examined as they relate to those observed following detonation of high explosives and as they relate to shocked air. Laser-induced breakdown spectroscopy (LIBS reliably correlates reactions involving atomic Al and aluminum monoxide (AlO with respect to both emission spectra and temperatures, as compared to small- and large-scale high-explosive detonations. Atomic Al and AlO resulting from laser ablation and a cited small-scale study, decay within ∼10-5 s, roughly 100 times faster than the Al and AlO decay rates (∼10-3 s observed following the large-scale detonation of an Al-encased explosive. Temperatures and species produced in laser-sparked air are compared to those produced with laser ablated graphite in air. With graphite present, CN is dominant relative to N2+. In studies where the height of the ablating laser’s focus was altered relative to the surface of the graphite substrate, CN concentration was found to decrease with laser focus below the graphite surface, indicating that laser intensity is a critical factor in the production of CN, via reactive nitrogen.

  3. Sequential high gravity ethanol fermentation and anaerobic digestion of steam explosion and organosolv pretreated corn stover.

    Science.gov (United States)

    Katsimpouras, Constantinos; Zacharopoulou, Maria; Matsakas, Leonidas; Rova, Ulrika; Christakopoulos, Paul; Topakas, Evangelos

    2017-11-01

    The present work investigates the suitability of pretreated corn stover (CS) to serve as feedstock for high gravity (HG) ethanol production at solids-content of 24wt%. Steam explosion, with and without the addition of H 2 SO 4 , and organosolv pretreated CS samples underwent a liquefaction/saccharification step followed by simultaneous saccharification and fermentation (SSF). Maximum ethanol concentration of ca. 76g/L (78.3% ethanol yield) was obtained from steam exploded CS (SECS) with 0.2% H 2 SO 4 . Organosolv pretreated CS (OCS) also resulted in high ethanol concentration of ca. 65g/L (62.3% ethanol yield). Moreover, methane production through anaerobic digestion (AD) was conducted from fermentation residues and resulted in maximum methane yields of ca. 120 and 69mL/g volatile solids (VS) for SECS and OCS samples, respectively. The results indicated that the implementation of a liquefaction/saccharification step before SSF employing a liquefaction reactor seemed to handle HG conditions adequately. Copyright © 2017 Elsevier Ltd. All rights reserved.

  4. Seismic Discrimination of Earthquakes and Explosions, with Application to the Southwestern United States

    Science.gov (United States)

    1979-03-22

    Laboratory Report No. 295, Teledyne Geotech, Alexandria, Virginia. -29- 4-\\, ... -1411 EARTHOUAKE RATIOS - h4 ARTHQUAKE RATIOS .... I EXPLOSION RATIOS u Ir...to seismic activity in north- ern New Mexico , appears to excite LQ to the same degree, that is, lower than at NTS. The low LQ amplitudes of RULISON and

  5. Damage & fracture of high-explosive mock subject to cyclic loading

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Cheng [Los Alamos National Laboratory; Rae, Philip J [Los Alamos National Laboratory; Cady, Carl M [Los Alamos National Laboratory; Lovato, Manuel L [Los Alamos National Laboratory

    2011-01-11

    We use four-point bend specimen with a single shallow edge notch to study the fracture process in Mock 900-21, a PBX 9501 high explosive simulant mock. Subject to monotonic loading we determine quantitatively the threshold load for macroscopic crack initiation from the notch tip. The four-point bend specimen is then subject to cyclic loading in such a way that during the first cycle, the applied force approaches but does not exceed the threshold load determined from the monotonic loading test and in the subsequent cycles, the overall maximum deformation is maintained to be equal to that of the first cycle. It is expected and is also confirmed that no macroscopic damage and cracking occur during the first cycle. However, we observe that sizable macroscopic crack is generated and enlarged during the subsequent cycles, even though the applied force never exceeds the threshold load. Details of the process of damage fonnation, accumulation, and crack extension are presented and the mechanical mechanism responsible for such failure process is postulated and discussed.

  6. Sensitivity effects of void density and arrangements in a REBO high explosive

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Stuart Davis [Los Alamos National Laboratory; Germann, Timothy C [Los Alamos National Laboratory; Gronbech - Jensen, Niels [Los Alamos National Laboratory

    2010-09-28

    The shock response of two-dimensional model, high explosive crystals with various arrangements of circular voids is explored. We simulate a piston impact using molecular dynamics simulations with a Reactive Empirical Bond Order (REBO) model potential for a sub-micron, sub-ns exothermic reaction in a diatomic molecular solid. In square lattices of voids all of one size, reducing that size or increasing the porosity while holding the other parameter fixed causes the hotspots to consume the material more quickly and detonation to occur sooner and at lower piston velocities. The early time behavior is seen to follow a very simple ignition and growth model. The hotspots are seen to collectively develop a broad pressure wave (a sonic, diffuse deflagration front) that, upon merging with the lead shock, transforms it into a detonation. The reaction yields produced by triangular lattices are not significantly different. With random void arrangements, the mean time to detonation is 15.5% larger than with the square lattice; the standard deviation of detonation delays is just 5.1%.

  7. Highly sensitive gas-phase explosive detection by luminescent microporous polymer networks.

    Science.gov (United States)

    Räupke, André; Palma-Cando, Alex; Shkura, Eugen; Teckhausen, Peter; Polywka, Andreas; Görrn, Patrick; Scherf, Ullrich; Riedl, Thomas

    2016-07-04

    We propose microporous networks (MPNs) of a light emitting spiro-carbazole based polymer (PSpCz) as luminescent sensor for nitro-aromatic compounds. The MPNs used in this study can be easily synthesized on arbitrarily sized/shaped substrates by simple and low-cost electrochemical deposition. The resulting MPN afford an extremely high specific surface area of 1300 m(2)/g, more than three orders of magnitude higher than that of the thin films of the respective monomer. We demonstrate, that the luminescence of PSpCz is selectively quenched by nitro-aromatic analytes, e.g. nitrobenzene, 2,4-DNT and TNT. In striking contrast to a control sample based on non-porous spiro-carbazole, which does not show any luminescence quenching upon exposure to TNT at levels of 3 ppm and below, the microporous PSpCz shows a clearly detectable response even at TNT concentrations as low as 5 ppb, clearly demonstrating the advantage of microporous films as luminescent sensors for traces of explosive analytes. This level states the vapor pressure of TNT at room temperature.

  8. Ecological surveys of the proposed high explosives wastewater treatment facility region

    Energy Technology Data Exchange (ETDEWEB)

    Haarmann, T.

    1995-07-01

    Los Alamos National Laboratory (LANL) proposes to improve its treatment of wastewater from high explosives (HE) research and development activities. The proposed project would focus on a concerted waste minimization effort to greatly reduce the amount of wastewater needing treatment. The result would be a 99% decrease in the HE wastewater volume, from the current level of 6,760,000 L/mo (1,786,000 gal./mo) to 41,200 L/mo (11,000 gal./mo). This reduction would entail closure of HE wastewater outfalls, affecting some wetland areas that depend on HE wastewater effluents. The outfalls also provide drinking water for many wildlife species. Terminating the flow of effluents at outfalls would represent an improvement in water quality in the LANL region but locally could have a negative effect on some wetlands and wildlife species. None of the affected species are protected by any state or federal endangered species laws. The purpose of this report is to briefly discuss the different biological studies that have been done in the region of the project area. This report is written to give biological information and baseline data and the biota of the project area.

  9. Critical velocities for deflagration and detonation triggered by voids in a REBO high explosive

    Energy Technology Data Exchange (ETDEWEB)

    Herring, Stuart Davis [Los Alamos National Laboratory; Germann, Timothy C [Los Alamos National Laboratory; Jensen, Niels G [Los Alamos National Laboratory

    2010-01-01

    The effects of circular voids on the shock sensitivity of a two-dimensional model high explosive crystal are considered. We simulate a piston impact using molecular dynamics simulations with a Reactive Empirical Bond Order (REBO) model potential for a sub-micron, sub-ns exothermic reaction in a diatomic molecular solid. The probability of initiating chemical reactions is found to rise more suddenly with increasing piston velocity for larger voids that collapse more deterministically. A void with radius as small as 10 nm reduces the minimum initiating velocity by a factor of 4. The transition at larger velocities to detonation is studied in a micron-long sample with a single void (and its periodic images). The reaction yield during the shock traversal increases rapidly with velocity, then becomes a prompt, reliable detonation. A void of radius 2.5 nm reduces the critical velocity by 10% from the perfect crystal. A Pop plot of the time-to-detonation at higher velocities shows a characteristic pressure dependence.

  10. Solid Rocket Launch Vehicle Explosion Environments

    Science.gov (United States)

    Richardson, E. H.; Blackwood, J. M.; Hays, M. J.; Skinner, T.

    2014-01-01

    Empirical explosion data from full scale solid rocket launch vehicle accidents and tests were collected from all available literature from the 1950s to the present. In general data included peak blast overpressure, blast impulse, fragment size, fragment speed, and fragment dispersion. Most propellants were 1.1 explosives but a few were 1.3. Oftentimes the data from a single accident was disjointed and/or missing key aspects. Despite this fact, once the data as a whole was digitized, categorized, and plotted clear trends appeared. Particular emphasis was placed on tests or accidents that would be applicable to scenarios from which a crew might need to escape. Therefore, such tests where a large quantity of high explosive was used to initiate the solid rocket explosion were differentiated. Also, high speed ground impacts or tests used to simulate such were also culled. It was found that the explosions from all accidents and applicable tests could be described using only the pressurized gas energy stored in the chamber at the time of failure. Additionally, fragmentation trends were produced. Only one accident mentioned the elusive "small" propellant fragments, but upon further analysis it was found that these were most likely produced as secondary fragments when larger primary fragments impacted the ground. Finally, a brief discussion of how this data is used in a new launch vehicle explosion model for improving crew/payload survival is presented.

  11. High-temperature explosive development for geothermal well stimulation. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Schmidt, E.W.; Mars, J.E.; Wang, C.

    1978-03-31

    A two-component, temperature-resistant liquid explosive called HITEX has been developed which is capable of withstanding 561/sup 0/K (550/sup 0/F) for 24 hours in a geothermal environment. The explosive is intended for the stimulation of nonproducing or marginally producing geothermal (hot dry rock, vapor-dominated or hydrothermal) reservoirs by fracturing the strata in the vicinity of a borehole. The explosive is inherently safe because it is mixed below ground downhole from two nondetonable liquid components. Development and safety tests included differential scanning calorimetry, thermal stability, minerals compatibility, drop-weight sensitivity, adiabatic compression, electrostatic discharge sensitivity, friction sensitivity, detonation arrest capability, cook-off tests, detonability at ambient and elevated pressure, detonation velocity and thin film propagation in a wedge.

  12. Dust Explosion Prevention and Mitigation, Status and Developments in Basic Knowledge and in Practical Application

    Directory of Open Access Journals (Sweden)

    Rolf K. Eckhoff

    2009-01-01

    Full Text Available Right from the early days of the process industries, continuous efforts have been made to develop and improve measures for prevention and mitigation of dust explosions in these industries. Nevertheless this hazard continues to threaten industries that manufacture, use and/or handle powders and dusts of a wide range of combustible materials. To improve methods for predicting explosion development in real industrial plant has been one major challenge. Hence, during the last years comprehensive numerical simulation codes, for addressing this problem, have been developed. Progress has also been made in other areas, for example, ignition source prevention. The importance of adopting inherently safer process design, by building on firm knowledge in powder science and technology, and of systematic education/training of personnel, is also emphasized.

  13. Explosive nucleosynthesis of ultra-stripped Type Ic supernovae: application to light trans-iron elements

    Science.gov (United States)

    Yoshida, Takashi; Suwa, Yudai; Umeda, Hideyuki; Shibata, Masaru; Takahashi, Koh

    2017-11-01

    We investigate the nucleosynthesis that occurs during the two-dimensional neutrino-driven explosion of ultra-stripped Type Ic supernovae evolved from 1.45 and 1.5 M⊙ CO stars. These supernovae explode with an explosion energy of ˜1050 erg and release ejecta of mass ˜0.1 M⊙. The light trans-iron elements Ga-Zr are produced in the neutrino-irradiated ejecta. The abundance distribution of these elements has a large uncertainty because of the uncertainty of the electron fraction of the neutrino-irradiated ejecta. The yield of the elements will be less than 0.01 M⊙. Ultra-stripped supernovae and core-collapse supernovae evolved from a light CO core could be the main sources of light trans-iron elements. They could also produce the neutron-rich nuclei 48Ca. Ultra-stripped supernovae eject ˜0.006-0.01 M⊙ of 56Ni. If most of the neutrino-irradiated ejecta is proton-rich, 56Ni will be produced more abundantly. The light-curves of these supernovae indicate a subluminous fast-decaying explosion with a peak magnitude of about -15 to -16. Future observations of ultra-stripped supernovae could constrain the event rate of a class of neutron star mergers.

  14. Applications of signal and image processing in explosives detection systems; Proceedings of the Meeting, Boston, MA, Nov. 16, 17, 1992

    Science.gov (United States)

    Connelly, James M.; Cheung, Shiu M.

    Papers included in these proceedings are grouped under the topics of explosives detection research and development at the Federal Aviation Administration (FAA), computed tomography for explosives detection, explosive vapor/particle detection, X-ray signature-based explosives detection, X-ray image-based explosives detection, and electromagnetic explosives and weapon detection. Individual papers include those on FAA explosive vapor/particle detection technology, the FAA aviation Research Grants Program and aviation research centers of excellence, moving-object computer tomography for luggage inspection, acoustic representation of tomographic data, and use of phase-conjugate interferometry for trace-compound detection. Attention is also given to explosives detection using three-dimensional computer-assisted image analysis, a data acquisition system developed for the resonance absorption project, digital image processing in the SECURE concealed-object detection system, and signal processing considerations in NMR detection of liquid explosives.

  15. Underground Explosions

    Science.gov (United States)

    2015-09-09

    is viewed as a result of the propulsion of broken rock mass by explosion gas by-products. The physical model used to recreate the second and the third...period seismographs. Seismologists of the                                                              5  Edinaya  Sistema   Seismicheskih  Nablyudenii...d’explosifs chiniques dans le sable: Programme Dynasol, Centre d’etudes Nucl. De Grenoble Lab. D’applications Speciales de la Physique, Grenoble. 9

  16. The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 1 of 3

    Energy Technology Data Exchange (ETDEWEB)

    Beck Colleen M,Edwards Susan R.,King Maureen L.

    2011-09-01

    This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

  17. The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 2 of 3

    Energy Technology Data Exchange (ETDEWEB)

    Beck Colleen M.,Edwards Susan R.,King Maureen L.

    2011-09-01

    This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

  18. The Off-Site Plowshare and Vela Uniform Programs: Assessing Potential Environmental Liabilities through an Examination of Proposed Nuclear Projects,High Explosive Experiments, and High Explosive Construction Activities Volume 3 of 3

    Energy Technology Data Exchange (ETDEWEB)

    Beck Colleen M.,Edwards Susan R.,King Maureen L.

    2011-09-01

    This document presents the results of nearly six years (2002-2008) of historical research and field studies concerned with evaluating potential environmental liabilities associated with U.S. Atomic Energy Commission projects from the Plowshare and Vela Uniform Programs. The Plowshare Program's primary purpose was to develop peaceful uses for nuclear explosives. The Vela Uniform Program focused on improving the capability of detecting, monitoring and identifying underground nuclear detonations. As a result of the Project Chariot site restoration efforts in the early 1990s, there were concerns that there might be other project locations with potential environmental liabilities. The Desert Research Institute conducted archival research to identify projects, an analysis of project field activities, and completed field studies at locations where substantial fieldwork had been undertaken for the projects. Although the Plowshare and Vela Uniform nuclear projects are well known, the projects that are included in this research are relatively unknown. They are proposed nuclear projects that were not executed, proposed and executed high explosive experiments, and proposed and executed high explosive construction activities off the Nevada Test Site. The research identified 170 Plowshare and Vela Uniform off-site projects and many of these had little or no field activity associated with them. However, there were 27 projects that merited further investigation and field studies were conducted at 15 locations.

  19. Reliable discrimination of high explosive and chemical/biological artillery using acoustic UGS

    Science.gov (United States)

    Hohil, Myron E.; Desai, Sachi

    2005-10-01

    discrimination between conventional and simulated chemical/biological artillery rounds using acoustic signals produced during detonation. Distinct characteristics arise within the different airburst signatures because high explosive warheads emphasize concussive and shrapnel effects, while chemical/biological warheads are designed to disperse their contents over large areas, therefore employing a slower burning, less intense explosive to mix and spread their contents. The ensuing blast waves are readily characterized by variations in the corresponding peak pressure and rise time of the blast, differences in the ratio of positive pressure amplitude to the negative amplitude, and variations in the overall duration of the resulting waveform. We show that, highly reliable discrimination (> 98%) between conventional and potentially chemical/biological artillery is achieved at ranges exceeding 3km. A feedforward neural network classifier, trained on a feature space derived from the distribution of wavelet coefficients found within different levels of the multiresolution decomposition yields.

  20. Shock-to-detonation transition of RDX and NTO based composite high explosives: experiments and modeling

    Science.gov (United States)

    Baudin, Gerard; Roudot, Marie; Genetier, Marc

    2013-06-01

    Composite HMX and NTO based high explosives (HE) are widely used in ammunitions. Designing modern warheads needs robust and reliable models to compute shock ignition and detonation propagation inside HE. Comparing to a pressed HE, a composite HE is not porous and the hot-spots are mainly located at the grain - binder interface leading to a different behavior during shock-to-detonation transition. An investigation of how shock-to-detonation transition occurs inside composite HE containing RDX and NTO is proposed in this lecture. Two composite HE have been studied. The first one is HMX - HTPB 82:18. The second one is HMX - NTO - HTPB 12:72:16. These HE have been submitted to plane sustained shock waves at different pressure levels using a laboratory powder gun. Pressure signals are measured using manganin gauges inserted at several distances inside HE. The corresponding run-distances to detonation are determined using wedge test experiments where the plate impact is performed using a powder gun. Both HE exhibit a single detonation buildup curve in the distance - time diagram of shock-to-detonation transition. This feature seems a common shock-to-detonation behavior for composite HE without porosity. This behavior is also confirmed for a RDX - HTPB 85:15 based composite HE. Such a behavior is exploited to determine the heterogeneous reaction rate versus the shock pressure using a method based on the Cauchy-Riemann problem inversion. The reaction rate laws obtained allow to compute both run-distance to detonation and pressure signals.

  1. PBX 9501 high explosive violent response/low amplitude insult project: Phase I

    Energy Technology Data Exchange (ETDEWEB)

    Idar, D.J.; Lucht, R.A.; Scammon, R.; Straight, J.; Skidmore, C.B.

    1997-01-01

    Preliminary modeling and experimental analyses of the violent reaction threshold of semi-heavily confined PBX 9501 to low velocity impact have been completed. Experimental threshold measurements were obtained with ten tests using a spigot gun design to launch a hemispherical projectile at the high explosive contained in stainless steel. Powder curves were determined for several gun barrel designs, powders, and projectile materials and have proven to be very reproducible over the range of 75 to 325 ft/s. A threshold velocity of approximately 246 ft/s for violent reaction of the PBX 9501 was determined with experimental gauge and switch measurements and the remaining physical test evidence. Preliminary analyses of the PBX 9501 samples retrieved from both unreacted and partially reacted targets have been completed. Core samples were obtained from the unreacted targets and submitted for density determinations. The subsequent analysis supports the concept that the PBX 9501 yields and fractures under the low velocity compression event to expand and fill the annular gap in the target design. Samples of PBX 9501 from the partially reacted targets were examined with scanning electron microscope and light microscope techniques. Increased evidence of mechanical twinning effects are noted in the HMX crystals from the partially reacted targets. Finite element calculations using DYNA213, with a modified ORION post processor, without reaction or chemistry models, were used to support the design of targets, to compare predictive analyses with experimental measurements, and to evaluate a proposed ignition criterion in a power law form for threshold to reaction with dependence on pressure, maximum shear strain rate, and time variables. The calculations show good agreement with the physical dent and deformation data from the remaining target evidence; however, they do not match the experimental pressure gauge measurements well.

  2. Highly sensitive detection of nitroaromatic explosives using an electrospun nanofibrous sensor based on a novel fluorescent conjugated polymer.

    Science.gov (United States)

    Long, Yuanyuan; Chen, Haibo; Wang, Huaming; Peng, Zhou; Yang, Yufei; Zhang, Guoqing; Li, Na; Liu, Feng; Pei, Jian

    2012-09-26

    An electrospun nanofibrous explosive sensor was first constructed based on a newly developed fluorescent conjugated polymer P containing heteroatom polycyclic units. Electrospinning by doping polymer P as a fluorescent probe in a polystyrene supporting matrix afforded a fluorescence nanofibrous film with unique porous structures, and effectively avoided the aggregation of polymer P. The novel explosive sensor exhibited stable fluorescence property, satisfactory reversibility with less than 5% loss of signal intensity after four quenching-regeneration cycles, and good reproducibility among three batches with a relative standard deviation of 2.8%. Such fabricated sensor also showed remarkable sensitivity toward a series of trace nitroaromatic explosive vapors, including picric acid (parts-per-trillion level) and 2,4,6-trinitrotoluene vapor (parts-per-billion level), as well as good selectivity with less than 10% response to typical interferents. Therefore, the present strategy extends the application of different kinds of conjugated polymers for the construction of optical chemosensors. Copyright © 2012 Elsevier B.V. All rights reserved.

  3. Xsense: using nanotechnology to combine detection methods for high sensitivity handheld explosives detectors

    DEFF Research Database (Denmark)

    Schmidt, Michael Stenbæk; Kostesha, Natalie; Bosco, Filippo

    2010-01-01

    In an effort to produce a handheld explosives sensor the Xsense project has been initiated at the Technical University of Denmark in collaboration with a number of partners. Using micro- and nano technological approaches it will be attempted to integrate four detection principles into a single de...

  4. The propagation of detonation waves in non-ideal condensed-phase explosives confined by high sound-speed materials

    Science.gov (United States)

    Schoch, Stefan; Nikiforakis, Nikolaos; Lee, Bok Jik

    2013-08-01

    Highly non-ideal condensed-phase explosives used by the mining industry have a strong detonation velocity dependence on the charge dimension. Detonation velocities can be as low as one third of the theoretically calculated ideal detonation velocity in charge radii close to the failure radius. Under these detonation conditions the flow in the confiner can become subsonic, a flow condition under which classical shock-polar analysis is not applicable. This restriction prohibits the use of popular engineering models like detonation shock dynamics and Wood-Kirkwood type models under these confinement conditions. In addition, it has been found in the literature that subsonic flow in the confiner will increase the influence of the confining material on the detonation performance. In this work, we use a multi-phase model coupled to an elastic-plastic model (for the representation of a confiner) to explore the interaction of detonations under these confiner conditions. An ammonium nitrate based mining emulsion is investigated in aluminium and steel confinement of finite and infinite thickness representing the confiner as either a fluid or an elastic-plastic material. It is found that the presence of elastic waves is negligible close to ideal detonation conditions, but is important close to the failure radius and in detonation conditions with subsonic flow in the confiner. High sound-speed confiners support the detonation through energy transport ahead of the detonation front if desensitisation effects are negligible. The detonation front profiles are found to remain convex even in the most non-ideal detonation conditions, and the detonation front curvature only becomes concave in a localised region close to the confiner edge.

  5. New Mix Explosives for Explosive Welding

    Science.gov (United States)

    Andreevskikh, Leonid

    2011-06-01

    Suggested and tested were some mix explosives--powder mixtures of a brisant high explosive (HE = RDX, PETN) and an inert diluent (baking soda)--for use in explosive welding. RDX and PETN were selected in view of their high throwing ability and low critical diameter. Since the decomposition of baking soda yields a huge amount of gaseous products, its presence ensures (even at a low HE percentage) a throwing speed that is sufficient for realization of explosive welding, at a reduced brisant action of charge. Mix chargers containing 30-70 wt % HE (the rest baking soda) have been tested experimentally and optimized. For study of possibility to reduce critical diameter of HE mixture, the mixture was prepared where HE crystal sizes did not exceed 10 μm. The tests, which were performed with this HE, revealed that the mixture detonated stably with the velocity D ~ 2 km/s, if the layer thickness was d = 2 mm. The above explosives afford to markedly diminish deformations within the oblique impact zone and thus to carry out explosive welding of hollow items and thin metallic foils.

  6. Liquid explosives

    CERN Document Server

    Liu, Jiping

    2015-01-01

    The book drawing on the author's nearly half a century of energetic materials research experience intends to systematically review the global researches on liquid explosives. The book focuses on the study of the conception, explosion mechanism, properties and preparation of liquid explosives. It provides a combination of theoretical knowledge and practical examples in a reader-friendly style. The book is likely to be interest of university researchers and graduate students in the fields of energetic materials, blasting engineering and mining.

  7. Optimal control with nonadiabatic molecular dynamics: Application to the Coulomb explosion of sodium clusters

    Science.gov (United States)

    Gómez Pueyo, Adrián; Budagosky M., Jorge A.; Castro, Alberto

    2016-12-01

    We present an implementation of optimal control theory for the first-principles nonadiabatic Ehrenfest molecular dynamics model, which describes a condensed matter system by considering classical point-particle nuclei, and quantum electrons, handled in our case with time-dependent density-functional theory. The scheme is demonstrated by optimizing the Coulomb explosion of small sodium clusters: the algorithm is set to find the optimal femtosecond laser pulses that disintegrate the clusters, for a given total duration, fluence, and cutoff frequency. We describe the numerical details and difficulties of the method.

  8. Application of Referee Functions to the Vehicle-Born Improvised Explosive Device Problem

    OpenAIRE

    Frederic Dambreville

    2011-01-01

    We propose a solution to the Vehicle-Born Improvised Explosive Device problem. This solution is based on a modelling by belief functions, and involves the construction of a combination rule dedicated to this problem. The construction of the combination rule is made possible by a tool developped in previous works, which is a generic framework dedicated to the construction of combination rules. This tool implies a tripartite architecture, with respective parts...

  9. Steam explosion studies review

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Moon Kyu; Kim, Hee Dong

    1999-03-01

    When a cold liquid is brought into contact with a molten material with a temperature significantly higher than the liquid boiling point, an explosive interaction due to sudden fragmentation of the melt and rapid evaporation of the liquid may take place. This phenomenon is referred to as a steam explosion or vapor explosion. Depending upon the amount of the melt and the liquid involved, the mechanical energy released during a vapor explosion can be large enough to cause serious destruction. In hypothetical severe accidents which involve fuel melt down, subsequent interactions between the molten fuel and coolant may cause steam explosion. This process has been studied by many investigators in an effort to assess the likelihood of containment failure which leads to large scale release of radioactive materials to the environment. In an effort to understand the phenomenology of steam explosion, extensive studies has been performed so far. The report presents both experimental and analytical studies on steam explosion. As for the experimental studies, both small scale tests which involve usually less than 20 g of high temperature melt and medium/large scale tests which more than 1 kg of melt is used are reviewed. For the modelling part of steam explosions, mechanistic modelling as well as thermodynamic modelling is reviewed. (author)

  10. Power Device Thermal Fault Tolerant Control of High-Power Three-Level Explosion-Proof Inverter Based on Holographic Equivalent Dual-Mode Modulation

    National Research Council Canada - National Science Library

    Shi-Zhou Xu; Chun-jie Wang; Yu-feng Peng

    2017-01-01

    It is necessary for three-level explosion-proof inverters to have high thermal stability and good output characteristics avoiding problems caused by power devices, such as IGBT, so it becomes a hot...

  11. 40 CFR 457.30 - Applicability; description of the commercial explosives load, assemble and pack plants subcategory.

    Science.gov (United States)

    2010-07-01

    ... commercial explosives load, assemble and pack plants subcategory. 457.30 Section 457.30 Protection of Environment ENVIRONMENTAL PROTECTION AGENCY (CONTINUED) EFFLUENT GUIDELINES AND STANDARDS EXPLOSIVES MANUFACTURING POINT SOURCE CATEGORY Explosives Load, Assemble, and Pack Plants Subcategory § 457.30...

  12. ENVIRONMENTAL TOXICOLOGY OF EXPLOSIVES

    OpenAIRE

    KOYUNCU, Hülya

    2017-01-01

    Explosives are used on a large scale byboth the military and by various civilian industries (e.g. mining, high-energymetalwork, and civil engineering). Explosives utilization contributes to the high environmentalcontamination. TNT(2,4,6-trinitrotoluene), RDX (hexahydro-1,3,5-trinitro-1,3,5-triazine), HMX (octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazocine) are found mainly in soils and surface waters; there havealso been cases of groundwater contamination. Most explosives are stable du...

  13. Description and validation of ERAD: An atmospheric dispersion model for high explosive detonations

    Energy Technology Data Exchange (ETDEWEB)

    Boughton, B.A.; DeLaurentis, J.M.

    1992-10-01

    The Explosive Release Atmospheric Dispersion (ERAD) model is a three-dimensional numerical simulation of turbulent atmospheric transport and diffusion. An integral plume rise technique is used to provide a description of the physical and thermodynamic properties of the cloud of warm gases formed when the explosive detonates. Particle dispersion is treated as a stochastic process which is simulated using a discrete time Lagrangian Monte Carlo method. The stochastic process approach permits a more fundamental treatment of buoyancy effects, calm winds and spatial variations in meteorological conditions. Computational requirements of the three-dimensional simulation are substantially reduced by using a conceptualization in which each Monte Carlo particle represents a small puff that spreads according to a Gaussian law in the horizontal directions. ERAD was evaluated against dosage and deposition measurements obtained during Operation Roller Coaster. The predicted contour areas average within about 50% of the observations. The validation results confirm the model`s representation of the physical processes.

  14. Experimental Investigations of Multiphase Explosions

    Science.gov (United States)

    Carney, Joel R.; Lightstone, James M.; McGrath, Thomas P.

    2009-12-01

    The addition of solid fuel particles to explosive formulations generally reduces the detonation velocity, but can enhance the blast performance if prompt combustion of the particles occurs in the detonation products and surrounding air early enough to support the shock. The degree to which fuel particles burn heavily depends on their dispersal throughout the explosion field and access to oxidizers. To distinguish the factors affecting the dispersal of fuel particles from those controlling their combustion, we began by analyzing the dispersal of equivalent mock inert particles. Solid glass spheres embedded in detonating small explosive charges were tracked using high-speed digital shadowgraphy. Two different particle sizes, 3 and 30 μm, and different mass fractions in the explosive compositions were considered. Shadowgraphs and pressure measurements were compared to the predictions of a newly developed multiphase numerical model. Reactive aluminum particles in the range of 1 to 120 μm in diameter were also analyzed. During the first 50 μs of the expansion, the general trend for both reactive and inert particles is for the smaller particles to expand near or beyond the leading shock wave to a greater extent than the larger particles. Expansion beyond the initial shock from the detonation is presumed to occur when particles agglomerate. The results are consistent with the predictions of the numerical models, highlighting the role of simple factors such as particle size and density in the early time expansion and mixing of fuels for enhanced blast applications.

  15. A Multipathway Model for High Explosives and Barium Transport Using GoldSim

    Science.gov (United States)

    Newman, B. D.; Hickmott, D. D.; Keating, E. H.; Robinson, B. A.; Gard, M. O.

    2002-05-01

    Outfalls from High Explosives (HE) production sites at Los Alamos National Laboratory (LANL) discharged RDX, TNT, HMX, and barium contaminated waters onto a mesa /canyon system on the western edge of the Pajarito Plateau from 1944 to 1996. HE concentrations in surface soils ranged to over 20 wt.%, and HE in waters range to over 800 ug/L. HE in water is present in springs, surface waters, alluvial waters and deep perched (> 700 ft. depth) and possibly regional (> 1200 ft depth) groundwaters. Barium concentrations range to over 4 wt.% in sediments, and to over 5000 ug/L in spring and alluvial waters. Because of the size of contaminant inventories and observations of HE in the perched zone and possibly deeper, there has been concern that there may be a long-term risk at a downgradient drinking water supply well. To address this concern, a GoldSim multipathway model was developed to simulate transport of HE and barium from source areas to the supply well. The objectives of the modeling effort were to generate a preliminary assessment of potential concentrations at the supply well and to identify any model components/parameters that require additional characterization based on model sensitivity and uncertainty. The model evaluates two main source areas, one is controlled by flow through the mesa vadose zone, and the other by flow through the canyon vadose zone. The two vadose zone modules feed into a saturated zone module that terminates at a pumping well (drinking water) module. The hydrogeology of the site is extremely complex and includes a heterogeneous, unfractured/fractured tuff vadose zone geology, ponds, springs, alluvial aquifers, a perennial stream reach, and two deep aquifers. Because of this complexity, and limited characterization and contaminant inventory information, we used a stochastic approach to quantitatively represent model/parameter uncertainties. Model parameters were developed using a variety of information including flow and transport modeling

  16. Freeze frame analysis on high speed cinematography of Nd/YAG laser explosions in ocular tissues.

    Science.gov (United States)

    Vernon, S A; Cheng, H

    1986-01-01

    High speed colour cinematography at 400 frames per second was used to photograph both single and train burst Nd/YAG laser applications in ox eyes at threshold energy levels. Measurements of the extent and speed of particle scatter and tissue distortion from the acoustic transient were made from a sequential freeze frame analysis of the films. Particles were observed to travel over 8 mm from the site of Nd/YAG application 20 milliseconds after a single pulse at initial speeds in excess of 20 km/h. The use of train bursts of pulses was seen to increase the number of particles scattered and project the wavefront of particles further from the point of laser application. Images PMID:3754458

  17. Assessing Miniaturized Sensor Performance using Supervised Learning, with Application to Drug and Explosive Detection

    DEFF Research Database (Denmark)

    Alstrøm, Tommy Sonne

    ’s, Program Commission on Nanoscience Biotechnology and IT (NABIIT), case number: 2106-07-0031. The project, baptized “Xsense” was led by professor Anja Boisen, DTU Nanotech. DTU Informatics participate in the project as data analysis partner. This thesis presents advances in the area of detection of vapor...... emanated by explosives and drugs, similar to an electronic nose. To evaluate sensor responses a data processing and evaluation pipeline is required. The work presented herein focuses on the feature extraction, feature representation and sensor accuracy. Thus the primary aim of this thesis is twofold....... The reasoning for using multiple sensors was the desire to investigate the feasibility for an integrated multisensor solution. A unique setup of multiple independent detectors is able to vastly enhance accuracy compared to what a single sensor can deliver. As we are detecting hazardous compounds this enables...

  18. Modeling nuclear explosion

    Science.gov (United States)

    Redd, Jeremy; Panin, Alexander

    2012-10-01

    As a result of the Nuclear Test Ban Treaty, no nuclear explosion tests have been performed by the US since 1992. This appreciably limits valuable experimental data needed for improvement of existing weapons and development of new ones, as well as for use of nuclear devices in non-military applications (such as making underground oil reservoirs or compressed air energy storages). This in turn increases the value of numerical modeling of nuclear explosions and of their effects on the environment. We develop numerical codes simulating fission chain reactions in a supercritical U and Pu core and the dynamics of the subsequent expansion of generated hot plasma in order to better understand the impact of such explosions on their surroundings. The results of our simulations (of both above ground and underground explosions) of various energy yields are presented.

  19. Chemical explosive stimulation

    Energy Technology Data Exchange (ETDEWEB)

    LaRocca, S.J.; McLamore, R.T.; Spencer, A.M. Jr.

    1974-02-01

    A safe, reliable chemical explosive fracturing process has been demonstrated and prototype equipment for its use has been successfully field tested.Called the Astro-Flow II process, it utilizes a highly energetic, hydrazine-based family of liquid explosives known as Astrolite. A unique property of these explosives is that they can be divided into 2 nonexplosive pumpable components that can be handled safely. The 2 components are pumped independently and simultaneously into the well and blended together downhole to form the explosive which is circulated in place or displaced into formation fractures. Explosive hazards to surface equipment and personnel are eliminated. Extensive testing of the physical and chemical stability of the mixed explosive indicates that the material can be reliable and safely used at elevated temperatures, pressures, and in the adverse chemical environment often found in deep oil and gas wells. These tests of prototype equipment proved that the 2 components could be independently pumped with precision and blended together to form the desired explosive formulation. How the process works is described.

  20. Highly sensitive detection of explosive triacetone triperoxide by an In{sub 2}O{sub 3} sensor

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Wenhui; Zhang Weide; Chen Luya, E-mail: zhangwd@scut.edu.cn [Nano Science Research Center, School of Chemistry and Chemical Engineering, South China University of Technology, 381 Wushan Road, Guangzhou 510640 (China)

    2010-08-06

    Triacetone triperoxide (TATP) is one of the most sensitive known explosives and can be easily synthesized using the commonly available chemicals acetone and hydrogen peroxide, but is difficult to be detected. In this study, In{sub 2}O{sub 3} nanoparticles were synthesized by a glucose-assisted solvothermal method at 120 deg. C for 18 h. The gas sensor based on In{sub 2}O{sub 3} nanoparticles exhibits a high response, fast response and recovery, a wide detecting range of 0.50-500 mg, good stability and excellent stability to TATP.

  1. Parametric Explosion Spectral Model

    Energy Technology Data Exchange (ETDEWEB)

    Ford, S R; Walter, W R

    2012-01-19

    Small underground nuclear explosions need to be confidently detected, identified, and characterized in regions of the world where they have never before occurred. We develop a parametric model of the nuclear explosion seismic source spectrum derived from regional phases that is compatible with earthquake-based geometrical spreading and attenuation. Earthquake spectra are fit with a generalized version of the Brune spectrum, which is a three-parameter model that describes the long-period level, corner-frequency, and spectral slope at high-frequencies. Explosion spectra can be fit with similar spectral models whose parameters are then correlated with near-source geology and containment conditions. We observe a correlation of high gas-porosity (low-strength) with increased spectral slope. The relationship between the parametric equations and the geologic and containment conditions will assist in our physical understanding of the nuclear explosion source.

  2. [Research on parameters of dynamic colorimetric temperature sensor and it's application to fuel air explosion temperature field detection].

    Science.gov (United States)

    Li, Lei; Liu, Qing-ming; Wang, Jian-ping

    2013-09-01

    According to the theory of colorimetric thermometry,the influences of center wavelength, wavelength bandwidth and solid angle on response speed and the precision of the sensor was analyzed systematically, and the operating parameters for transient high temperature measurement system were determined. A calculation method based on photoelectric conversion coefficient, and higher and lower operating wavelength of the colorimetric temperature sensor was given. At the optimal operating temperature, calibration experiment was conducted in a high temperature blackbody furnace. Based on the experimental results, the operating parameters of the sensor were determined and the colorimetric temperature response was calculated. The results show that the errors between the calculated response and the experiment one are less than 1%. By using the colorimetric temperature sensor, the temperature response of fuel air explosion field was detected and the variations of temperature with time and space in detonation field were obtained.

  3. Numerical model investigation for potential methane explosion and benzene vapor intrusion associated with high-ethanol blend releases.

    Science.gov (United States)

    Ma, Jie; Luo, Hong; Devaull, George E; Rixey, William G; Alvarez, Pedro J J

    2014-01-01

    Ethanol-blended fuel releases usually stimulate methanogenesis in the subsurface, which could pose an explosion risk if methane accumulates in a confined space above the ground where ignitable conditions exist. Ethanol-derived methane may also increase the vapor intrusion potential of toxic fuel hydrocarbons by stimulating the depletion of oxygen by methanotrophs, and thus inhibiting aerobic biodegradation of hydrocarbon vapors. To assess these processes, a three-dimensional numerical vapor intrusion model was used to simulate the degradation, migration, and intrusion pathway of methane and benzene under different site conditions. Simulations show that methane is unlikely to build up to pose an explosion hazard (5% v/v) if diffusion is the only mass transport mechanism through the deeper vadose zone. However, if methanogenic activity near the source zone is sufficiently high to cause advective gas transport, then the methane indoor concentration may exceed the flammable threshold under simulated conditions. During subsurface migration, methane biodegradation could consume soil oxygen that would otherwise be available to support hydrocarbon degradation, and increase the vapor intrusion potential for benzene. Vapor intrusion would also be exacerbated if methanogenic activity results in sufficiently high pressure to cause advective gas transport in the unsaturated zone. Overall, our simulations show that current approaches to manage the vapor intrusion risk for conventional fuel released might need to be modified when dealing with some high ethanol blend fuel (i.e., E20 up to E95) releases.

  4. Biodegradation of nitro-explosives.

    Science.gov (United States)

    Kanekar, Pradnya; Dautpure, Premlata; Sarnaik, Seema

    2003-09-01

    Environmental contamination by nitro compounds is associated principally with the explosives industry. However, global production and use of explosives is unavoidable. The presently widely used nitro-explosives are TNT (Trinitrotoluene), RDX (Royal Demolition Explosive) and HMX (High Melting Explosive). Nevertheless, the problems of these nitro-explosives are almost parallel due to their similarities of production processes, abundance of nitro-explosives and resembling chemical structures. The nitro-explosives per se as well as their environmental transformation products are toxic, showing symptoms as methaemoglobinaemia, kidney trouble, jaundice etc. Hence their removal/degradation from soil/water is essential. Aerobic and anaerobic degradation of TNT and RDX have been reported, while for HMX anaerobic or anoxic degradation have been described in many studies. A multisystem involvement using plants in remediation is gaining importance. Thus the information about degradation of nitro-explosives is available in jigsaw pieces which needs to be arranged and lacunae filled to get concrete degradative schemes so that environmental pollution from nitro-explosives can be dealt with more successfully at a macroscale. An overview of the reports on nitro-explosives degradation, future outlook and studies done by us are presented in this review.

  5. Explosive compositions

    Energy Technology Data Exchange (ETDEWEB)

    Craig, J.F.M.; Falconer, E.L.

    1971-04-13

    A thickening agent for an aqueous slurry explosive composition consists of the combination of a cross-linked galactomannan with psyllium flour in specific proportions. This thickener provides good fluidity and reduced tackiness. (7 claims)

  6. Shock waves & explosions

    CERN Document Server

    Sachdev, PL

    2004-01-01

    Understanding the causes and effects of explosions is important to experts in a broad range of disciplines, including the military, industrial and environmental research, aeronautic engineering, and applied mathematics. Offering an introductory review of historic research, Shock Waves and Explosions brings analytic and computational methods to a wide audience in a clear and thorough way. Beginning with an overview of the research on combustion and gas dynamics in the 1970s and 1980s, the author brings you up to date by covering modeling techniques and asymptotic and perturbative methods and ending with a chapter on computational methods.Most of the book deals with the mathematical analysis of explosions, but computational results are also included wherever they are available. Historical perspectives are provided on the advent of nonlinear science, as well as on the mathematical study of the blast wave phenomenon, both when visualized as a point explosion and when simulated as the expansion of a high-pressure ...

  7. Innovative assistant extraction of flavonoids from pine (Larix olgensis Henry) needles by high-density steam flash-explosion.

    Science.gov (United States)

    Song, Hongdong; Yang, Ruijin; Zhao, Wei; Katiyo, Wendy; Hua, Xiao; Zhang, Wenbin

    2014-04-30

    High-density steam flash-explosion (HDSF) was first employed to extract flavonoids from pine needles. The HDSF treatment was performed at a steam pressure of 0.5-2.0 MPa for 20-120 s. Scanning electron microscopy and high-performance liquid chromatography combined with photodiode-array detection and electrospray ionization mass spectrometry (HPLC-DAD-ESI-MS) were used to characterize the morphological changes and analyze flavonoids of pine needles before and after HDSF treatment. Our results indicated that, after steam explosion at 1.5 MPa for 60 s, the flavonoids extracted reached 50.8 rutin equivalents mg/g dry weight, which was 2.54-fold as that of the untreated sample. HDSF pretreatment caused the formation of large micropores on the pine needles and production of particles, as well as the removal of wax layers. Compared to microwave-assisted, ultrasound-assisted, and solvent extraction, HDSF pretreatment took only 30 min to reach a maximum yield of 47.0 rutin equivalents mg/g flavonoids extract after pine needles were treated at 1.5 MPa for 80 s. In addition, after HDSF treatment, the aglycones were 3.17 times higher than that of untreated pine needles, while glycosides were lower by 57% (in HPLC-DAD individuals' sum) due to hydrolysis of flavonoids glycosides. It can be concluded that HDSF is a practical pretreatment for extraction of flavonoids and conversion in the healthy food and pharmaceutical industries.

  8. Chlorine as a geobarometer tool: Application to the large explosive eruptions of Vesuvius

    Science.gov (United States)

    Balcone-Boissard, Hélène; Boudon, Georges; Cioni, Raffaello; Zdanowicz, Géraldine; Orsi, Giovanni; Civetta, Lucia

    2015-04-01

    One of the current stakes in modern volcanology is the definition of magma storage conditions which has direct implications on the eruptive style and thus on the associated risks and the management of likely related crisis. In alkaline differentiated magmas, chlorine (Cl), contrary to H2O, occurs as a minor volatile species but may be used as a geobarometer. Numerous experimental studies on Cl solubility have highlighted its saturation conditions in alkaline silicate melts. The NaCl-H2O system is characterized by immiscibility under wide ranges of pressure, temperature and NaCl content (Somma-Vesuvius: We have analysed the products of 13 explosive eruptions of Monte Somma-Vesuvius, including four Plinian (Pomici di Base, Mercato, Avellino, Pompeii), five sub-Plinian (Verdoline, AP1, AP2, Pollena, 1631 AD) and four violent strombolian to ash emission events (AP3, 1822, 1906, 1944). We have focussed our research on the earliest emitted, most evolved products of each eruption, likely representing the shallower, H2O-saturated portion of the reservoir. We highlighted two magma ponding zones, at ~170-200 MPa and ~105-115 MPa. We have also estimated maximum pre-eruptive H2O content for the different magma compositions, varying between 3.5 and 7 wt%. The results, in large agreement with literature, are very promising. The Cl geobarometer may help scientists to define the reservoir dynamics through time and provide strong constraints on pre-eruptive conditions, of outmost importance for the interpretation of the monitoring data and the identification of precursory signals.

  9. Tailoring Wet Explosion Process Parameters for the Pretreatment of Cocksfoot Grass for High Sugar Yields

    DEFF Research Database (Denmark)

    Njoku, Stephen Ikechukwu; Ahring, Birgitte Kiær; Uellendahl, Hinrich

    2013-01-01

    glucose release with low formation of by-products. Under these conditions, the cellulose and hemicellulose sugar recovery was 94 % and 70 %, respectively. The efficiency of the enzymatic hydrolysis of cellulose under these conditions was 91 %. On the other hand, the release of pentose sugars was higher......The pretreatment of lignocellulosic biomass is crucial for efficient subsequent enzymatic hydrolysis and ethanol fermentation. In this study, wet explosion (WEx) pretreatment was applied to cocksfoot grass and pretreatment conditions were tailored for maximizing the sugar yields using response...... when applying less severe pretreatment conditions C (160 °C, 5 min, 0.2 % dilute sulfuric acid). Therefore, the choice of the most suitable pretreatment conditions is depending on the main target product, i.e., hexose or pentose sugars....

  10. Single-charge craters excavated during subsurface high-explosive experiments at Big Black Test Site, Mississippi

    Energy Technology Data Exchange (ETDEWEB)

    Woodruff, W.R.; Bryan, J.B.

    1978-10-19

    Single-charge and row-charge subsurface cratering experiments were performed to learn how close-spacing enhances single-crater dimensions. Our first experimental phase established cratering curves for 60-lb charges of the chemical explosive. For the second phase, to be described in a subsequent report, the Row-cratering experiments were designed and executed. This data report contains excavated dimensions and auxiliary data for the single-charge cratering experiments. The dimensions for the row-charge experiments will be in the other report. Significant changes in the soil's water content appeared to cause a variability in the excavated dimensions. This variability clouded the interpretation and application of the cratering curves obtained.

  11. Circuit simulations of the use of explosive formed fuses to obtain high voltage pulses for high impedance loads

    Energy Technology Data Exchange (ETDEWEB)

    Degnan, J.H.; Kiuttu, G.F.; Turchi, P.J. [Air Force Research Labs., Kirtland AFB, NM (United States). Phillips Research Site; Graham, J.D. [Maxwell Technologies, Inc., Albuquerque, NM (United States); Goforth, J.H.; Oona, H.; Lopez, E.A. [Los Alamos National Lab., NM (United States)

    1998-12-31

    Explosive Formed Fuses (EFF`s) use conducting elements that are deformed by explosive pressure (typically, against dielectric dies). This causes the fuse geometry to change, so that the conducting element cross section decreases. This enables a higher ratio of current conduction to current interrupt time than for normal fuses, and it enables more control of when current interruption occurs. In combination with a suitable output closing switch, EFF`s can be used to obtain several hundred kilovolt voltage pulses from inductive stores to drive several ohm loads. With proper choices of inductive store, EFF geometry and material, and output closing switch features, such a voltage pulse can be approximately flat topped for microsecond duration, and have a small fraction of microsecond risetime. The authors present theoretical analysis and circuit simulations which illustrate this, using scaled empirical EFF parameters, for inductive stores in the 1 Weber flux, several hundred nanohenry range. The circuit simulations were done using Microcap-4, with user defined elements. These simulations were done with static inductive stores, and with explosive magnetic flux compression generators driving inductive stores.

  12. Weighted calibration with reduced number of signals by weighing factor modelling: application to the identification of explosives by ion chromatography.

    Science.gov (United States)

    Brasil, Beatriz; Bettencourt da Silva, Ricardo J N; Camões, M Filomena G F C; Salgueiro, Pedro A S

    2013-12-04

    The linear weighted regression model (LW) can be used to calibrate analytical instrumentation in a range of quantities (e.g. concentration or mass) wider than possible by the linear unweighted regression model, LuW (i.e. the least squares regression model), since this model can be applied when signals are not equally precise through the calibration range. If precision of signals varies within the calibration range, the regression line should be defined taking into account that more precise signals are more reliable and should count more to define regression parameters. Nevertheless, the LW requires the determination of the variation of signals precision through the calibration range. Typically, this information is collected experimentally for each calibration, requiring a large number of replicate collection of signals of calibrators. This work proposes reducing the number of signals needed to perform LW calibrations by developing models of weighing factors robust to daily variations of instrument sensibility. These models were applied to the determination of the ionic composition of the water soluble fraction of explosives. The adequacy of the developed models was tested through the analysis of control standards, certified reference materials and the ion balance of anions and cations in aqueous extracts of explosives, considering the measurement uncertainty estimated by detailed metrological models. The high success rate of the comparisons between estimated and known quantity values of reference solutions, considering results uncertainty, proves the validity of developed metrological models. The relative expanded measurement uncertainty of single determinations ranged from 1.93% to 35.7% for calibrations performed along 4 months. Copyright © 2013 Elsevier B.V. All rights reserved.

  13. Dynamics of explosive paroxysms at open-vent andesitic systems: High-resolution mass distribution analyses of the 2006 Tungurahua fall deposit (Ecuador)

    Science.gov (United States)

    Eychenne, Julia; Le Pennec, Jean-Luc; Ramón, Patricio; Yepes, Hugo

    2013-01-01

    Long-lasting andesitic eruptions sometimes include strong short-lived explosive events, which can pose significant hazards in populated regions. The origin and dynamics of such violent eruptions remain poorly known and may involve a combination of different factors. Tungurahua volcano, Ecuador, reawakens in 1999 and is an example of such an open-vent system that experienced a strong and deadly andesitic pyroclastic flow-forming event in August 2006. Inspection of the deposits suggested that the event could have been triggered by magma mixing (coexistence of both silicic pumices and andesitic scoria in the tephra), magma-water interaction (presence of xenolithic clasts) or deep andesitic magma reinjection (based on mineral chemistry). Here we investigate these options by performing a high-resolution mass budget analysis of the scoria fall deposit. This is achieved by analysing componentry compositions and their mass distribution pattern in the layer, which allow us to document and integrate exponential and power laws mass decay rates over wide areas. The results yield a total mass for the tephra layer of ˜2×1010 kg. The pumice mass fraction is far too small (paroxysm. Altogether our results support an explosive event fed by a deep gas-rich andesitic reinjection, which would have incorporated a pocket of older differentiated magma and eroded the upper conduit during the sub-plinian event. The high-resolution mass-based approach reveals useful to decipher the origin of the violent 2006 paroxysm and has potential to improve magnitude determinations of ancient eruption by considering componentry mass instead of volume. It is also applicable for monitoring purposes in the context of ongoing crises at andesitic volcanoes worldwide

  14. Bias-corrected estimation in potentially mildly explosive autoregressive models

    DEFF Research Database (Denmark)

    Haufmann, Hendrik; Kruse, Robinson

    that the indirect inference approach oers a valuable alternative to other existing techniques. Its performance (measured by its bias and root mean squared error) is balanced and highly competitive across many different settings. A clear advantage is its applicability for mildly explosive processes. In an empirical...... application to a long annual US Debt/GDP series we consider rolling window estimation of autoregressive models. We find substantial evidence for time-varying persistence and periods of explosiveness during the Civil War and World War II. During the recent years, the series is nearly explosive again. Further......This paper provides a comprehensive Monte Carlo comparison of different finite-sample bias-correction methods for autoregressive processes. We consider classic situations where the process is either stationary or exhibits a unit root. Importantly, the case of mildly explosive behaviour is studied...

  15. Highly Stable Zr(IV)-Based Metal-Organic Frameworks for the Detection and Removal of Antibiotics and Organic Explosives in Water.

    Science.gov (United States)

    Wang, Bin; Lv, Xiu-Liang; Feng, Dawei; Xie, Lin-Hua; Zhang, Jian; Li, Ming; Xie, Yabo; Li, Jian-Rong; Zhou, Hong-Cai

    2016-05-18

    Antibiotics and organic explosives are among the main organic pollutants in wastewater; their detection and removal are quite important but challenging. As a new class of porous materials, metal-organic frameworks (MOFs) are considered as a promising platform for the sensing and adsorption applications. In this work, guided by a topological design approach, two stable isostructural Zr(IV)-based MOFs, Zr6O4(OH)8(H2O)4(CTTA)8/3 (BUT-12, H3CTTA = 5'-(4-carboxyphenyl)-2',4',6'-trimethyl-[1,1':3',1″-terphenyl]-4,4″-dicarboxylic acid) and Zr6O4(OH)8(H2O)4(TTNA)8/3 (BUT-13, H3TTNA = 6,6',6″-(2,4,6-trimethylbenzene-1,3,5-triyl)tris(2-naphthoic acid)) with the the-a topological structure constructed by D4h 8-connected Zr6 clusters and D3h 3-connected linkers were designed and synthesized. The two MOFs are highly porous with the Brunauer-Emmett-Teller surface area of 3387 and 3948 m(2) g(-1), respectively. Particularly, BUT-13 features one of the most porous water-stable MOFs reported so far. Interestingly, these MOFs represent excellent fluorescent properties, which can be efficiently quenched by trace amounts of nitrofurazone (NZF) and nitrofurantoin (NFT) antibiotics as well as 2,4,6-trinitrophenol (TNP) and 4-nitrophenol (4-NP) organic explosives in water solution. They are responsive to NZF and TNP at parts per billion (ppb) levels, which are among the best performing luminescent MOF-based sensing materials. Simultaneously, both MOFs also display high adsorption abilities toward these organic molecules. It was demonstrated that the adsorption plays an important role in the preconcentration of analytes, which can further increase the fluorescent quenching efficiency. These results indicate that BUT-12 and -13 are favorable materials for the simultaneous selective detection and removal of specific antibiotics and organic explosives from water, being potentially useful in monitoring water quality and treating wastewater.

  16. Dynamics of explosive paroxysms at open andesitic systems: high-resolution mass distribution analyses of 2006 tephra from Tungurahua volcano (Ecuador)

    Science.gov (United States)

    Le Pennec, J.; Eychenne, J.; Ramon, P.; Yepes, H.

    2012-12-01

    Many andesitic volcanoes at subduction plate margins can experience in the course of their evolution periods of sub-continuous eruption during years, decades, or centuries. Such long-lived periods may embrace more or less intense outgassing events, extrusion of viscous lava flows and domes (e.g. Colima in Mexico, Merapi in Indonesia, Arenal in Costa Rica), and explosive activity of uneven intensity (e.g. Semeru in Indonesia, Sakurajima in Japan, Sangay in Ecuador). In addition, strong explosive events of short duration may occur, with potential generation of pyroclastic flows on the flanks and beyond, which can pose significant hazards in populated regions. The origin and dynamics of such violent eruptions remain poorly known and may involve a combination of different factors. Tungurahua volcano, Ecuador, reawaken in 1999 and is an example of such open-system behaviour that experienced a strong and deadly andesitic pyroclastic flow-forming event in August 2006. Inspection of the deposits suggested that the event could have been triggered by magma mixing (silicic pumices in the tephra), magma-water interaction (presence of xenolithic clasts) or deep andesitic magma reinjection (based on mineral chemistry). Here we investigate these options by performing a high-resolution mass budget analysis of the scoria fall deposit. This is achieved by analysing componentry compositions and their mass distribution pattern in the layer, which allow us to document and integrate exponential and power laws mass decay rates over wide areas. The results yield a total mass for the tephra layer of ~2 x 1010kg. The pumice mass fraction is far too small (paroxysm. Altogether our results support an explosive event fed by a deep gas-rich andesitic reinjection, which would have incorporated a pocket of older differentiated magma and eroded the upper conduit during the sub-plinian event. The high-resolution mass-based approach reveals useful to decipher the origin of the violent 2006 paroxysm

  17. Measurement of carbon condensation using small-angle x-ray scattering during detonation of the high explosive hexanitrostilbene

    Energy Technology Data Exchange (ETDEWEB)

    Bagge-Hansen, M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Lauderbach, L. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hodgin, R. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Bastea, S. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Fried, L. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Jones, A. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); van Buuren, T. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Hansen, D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Benterou, J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); May, C. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States); Graber, T. [Washington State Univ., Pullman, WA (United States); Jensen, B. J. [Los Alamos National Lab. (LANL), Los Alamos, NM (United States); Ilavsky, J. [Argonne National Lab. (ANL), Argonne, IL (United States); Willey, T. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-06-24

    The dynamics of carboncondensation in detonating high explosives remains controversial. Detonation model validation requires data for processes occurring at nanometer length scales on time scales ranging from nanoseconds to microseconds. A new detonation endstation has been commissioned to acquire and provide time-resolved small-angle x-ray scattering (SAXS) from detonating explosives. Hexanitrostilbene (HNS) was selected as the first to investigate due to its ease of initiation using exploding foils and flyers, vacuum compatibility, high thermal stability, and stoichiometric carbon abundance that produces high carbon condensate yields. The SAXS data during detonation, collected with 300 ns time resolution, provide unprecedented signal fidelity over a broad q-range. This fidelity permits the first analysis of both the Guinier and Porod/power-law regions of the scattering profile during detonation, which contains information about the size and morphology of the resultant carbon condensate nanoparticles. To bolster confidence in these data, the scattering angle and intensity were additionally cross-referenced with a separate, highly calibrated SAXS beamline. The data show that HNS produces carbon particles with a radius of gyration of 2.7 nm in less than 400 ns after the detonation front has passed, and this size and morphology are constant over the next several microseconds. These data directly contradict previous pioneering work on RDX/TNT mixtures and TATB, where observations indicate significant particle growth (50% or more) continues over several microseconds. As a result, the power-law slope is about –3, which is consistent with a complex disordered, irregular, or folded sp2 sub-arrangement within a relatively monodisperse structure possessing radius of gyration of 2.7 nm after the detonation of HNS.

  18. GAP pre-polymer, as an energetic binder and high performance additive for propellants and explosives: A review

    Directory of Open Access Journals (Sweden)

    Mehmet S. Eroglu

    2017-08-01

    Full Text Available In preparation of energetic composite formulations, functionally terminated pre-polymers have been used as binder. After physically mixing the pre-polymers with oxidizing components, metallic fuel, burning rate modifier and other minor ingredients, they are cured with a suitable curing agent to provide physical and chemical stability. These pre-polymers could be functionalized with carboxyl, epoxide or hydroxyl groups at varying average chain functionalities. For carboxyl-terminated pre-polymers, an epoxy functional curing agents could be used. If the pre-polymer possesses hydroxyl groups, isocyanate functional curing agents are the most suitable curing agents in terms of easy and efficient processing. Glycidyl azide polymer (GAP is one of the well-known low-molecular weight energetic liquid pre-polymer, which was developed to use as energetic binder, high performance additive and gas generator for high performance smokeless composite propellant and explosive formulations. Linear or branched GAP can be synthesized by nucleophilic substitution reaction of corresponding poly(epichlorohydrin (PECH with sodium azide through replacement of chloromethyl groups of PECH with pendant energetic azido-methyl groups on the polyether main chain. Positive heat of formation (+957 kJ/kg enables exothermic and rapid decomposition of GAP producing fuel rich gases. Its polyether main chain provides GAP with relatively low glass transition temperature (Tg= - 48 oC and presence of hydroxyl functional groups allows it to have easy processing in curing with isocyanate curing agents to form covalently crosslinked polyurethane structure. These outstanding properties of GAP enable it to be used as energetic polymeric binder and high performance additive in preparation of energetic materials and low vulnerable explosives.

  19. Explosively developing extratropical cyclone associated with the high wind-waves along the east coast of Korea

    Science.gov (United States)

    Heo, Ki-Young; Choi, Jin-Yong; Park, Kwang-Soon

    2017-04-01

    An extreme extratropical cyclone struck the northern part of Korea on May 3, 2016 causing significant damage to property on the land due to extreme winds and abnormal high waves in coastal area. The meteorological composite fields for the cyclone show a strong surface wind velocity (up to 45 m s-1) during its mature phase. This study investigated the development mechanisms of an explosive cyclone through numerical simulation and sensitivity experiments using the Advanced Research version of the Weather Research and Forecasting (WRF-ARW) model. The trigger mechanism for the explosive cyclogenesis is the strong baroclinic instability and temperature advection associated with upper-level cut-off low and the interaction of potential vorticity (PV) anomalies between the lower- and upper-level. The efficient placement of the high- and low-level jets forms a favorable condition for its development and transportation of water vapor and the instability energy into the cyclone. The sea-state wave simulation of large swell waves along the eastern coast of the Korean Peninsula is obtained using the wave model WAVEWATCHIII (WW3) forced by the 10-m above ground level wind field from the WRF-ARW simulations. The simulation results of WW3 for the significant wave height were compared against buoy observation data at 1-h intervals. The simulated significant wave height systematically underestimated by 0.5 m. However, strong wind field generated by the cyclone is clarified as key features determining the characteristics of the high waves in terms of the temporal growth and decay patterns.

  20. [A magnet application for the splinters take out in the mine-explosion woundings].

    Science.gov (United States)

    Gerasimenko, E P; Glebskiĭ, Iu V; Poliakov, O I; Voĭtov, V V; Shestopaliuk, A A; Kurachenko, I P; Kobza, T I

    2015-01-01

    The methods of successful take out of metallic splinters from soft tissues with the help of magnet were depicted. Experience of the splinters take out, using small operative accesses or the wounding channell passage, was summarized. The method permits to determine precisely the splinter localization. The method application have promoted the reduction of the patient's stationary treatment duration and the comlications rate.

  1. A Comparison of Neutron-Based Non-Destructive Assessment Methods for Chemical Warfare Materiel and High Explosives

    Energy Technology Data Exchange (ETDEWEB)

    E.H. Seabury; D.L. Chichester; C.J. Wharton; A.J. Caffrey

    2008-08-01

    Prompt Gamma Neutron Activation Analysis (PGNAA) systems employ neutrons as a probe to interrogate items, e.g. chemical warfare materiel-filled munitions. The choice of a neutron source in field-portable systems is determined by its ability to excite nuclei of interest, operational concerns such as radiological safety and ease-of-use, and cost. Idaho National Laboratory’s PINS Chemical Assay System has traditionally used a Cf-252 isotopic neutron source, but recently a Deuterium-Tritium (DT) Electronic Neutron Generator (ENG) has been tested as an alternate neutron source. This paper presents the results of using both of these neutron sources to interrogate chemical warfare materiel (CWM) and high explosive (HE) filled munitions.

  2. Environmental Assessment for the High Explosives Wastewater Treatment Facility, Los Alamos National Laboratory, Los Alamos, New Mexico

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1995-08-03

    The Department of Energy (DOE) has identified a need to improve the management of wastewater resulting from high explosives (HE) research and development work at Los Alamos National Laboratory (LANL). LANL`s current methods off managing HE-contaminated wastewater cannot ensure that discharged HE wastewater would consistently meet the Environmental Protection Agency`s (EPA`s) standards for wastewater discharge. The DOE needs to enhance He wastewater management to e able to meet both present and future regulatory standards for wastewater discharge. The DOE also proposes to incorporate major pollution prevention and waste reduction features into LANL`s existing HE production facilities. Currently, wastewater from HE processing buildings at four Technical Areas (TAs) accumulates in sumps where particulate HE settles out and barium is precipitated. Wastewater is then released from the sumps to the environment at 15 permitted outfalls without treatment. The released water may contain suspended and dissolved contaminants, such as HE and solvents. This Environmental Assessment (EA) analyzes two alternatives, the Proposed Action and the Alternative Action, that would meet the purpose and need for agency action. Both alternatives would treat all HE process wastewater using sand filters to remove HE particulates and activated carbon to adsorb organic solvents and dissolved HE. Under either alternative, LANL would burn solvents and flash dried HE particulates and spent carbon following well-established procedures. Burning would produce secondary waste that would be stored, treated, and disposed of at TA-54, Area J. This report contains the Environmental Assessment, as well as the Finding of No Significant Impact and Floodplain Statement of Findings for the High Explosives Wastewater Treatment Facility.

  3. TOWARD END-TO-END MODELING FOR NUCLEAR EXPLOSION MONITORING: SIMULATION OF UNDERGROUND NUCLEAR EXPLOSIONS AND EARTHQUAKES USING HYDRODYNAMIC AND ANELASTIC SIMULATIONS, HIGH-PERFORMANCE COMPUTING AND THREE-DIMENSIONAL EARTH MODELS

    Energy Technology Data Exchange (ETDEWEB)

    Rodgers, A; Vorobiev, O; Petersson, A; Sjogreen, B

    2009-07-06

    This paper describes new research being performed to improve understanding of seismic waves generated by underground nuclear explosions (UNE) by using full waveform simulation, high-performance computing and three-dimensional (3D) earth models. The goal of this effort is to develop an end-to-end modeling capability to cover the range of wave propagation required for nuclear explosion monitoring (NEM) from the buried nuclear device to the seismic sensor. The goal of this work is to improve understanding of the physical basis and prediction capabilities of seismic observables for NEM including source and path-propagation effects. We are pursuing research along three main thrusts. Firstly, we are modeling the non-linear hydrodynamic response of geologic materials to underground explosions in order to better understand how source emplacement conditions impact the seismic waves that emerge from the source region and are ultimately observed hundreds or thousands of kilometers away. Empirical evidence shows that the amplitudes and frequency content of seismic waves at all distances are strongly impacted by the physical properties of the source region (e.g. density, strength, porosity). To model the near-source shock-wave motions of an UNE, we use GEODYN, an Eulerian Godunov (finite volume) code incorporating thermodynamically consistent non-linear constitutive relations, including cavity formation, yielding, porous compaction, tensile failure, bulking and damage. In order to propagate motions to seismic distances we are developing a one-way coupling method to pass motions to WPP (a Cartesian anelastic finite difference code). Preliminary investigations of UNE's in canonical materials (granite, tuff and alluvium) confirm that emplacement conditions have a strong effect on seismic amplitudes and the generation of shear waves. Specifically, we find that motions from an explosion in high-strength, low-porosity granite have high compressional wave amplitudes and weak

  4. Electronic Nose for Detection of Explosives.

    Science.gov (United States)

    Oakes, Landon; Dobrokhotov, Vladimir

    2010-03-01

    The ability to sense the environment is of critical importance for a broad array of applications ranging from ecosystem health, hazardous materials avoidance/chemical warfare to medical applications. In this research project we use the self-assembled monolayer (SAM)-functionalized nanoparticle-decorated nanosprings as a novel design for sensing vapors associated with explosives. The common requirements for any sensor application are sensitivity, selectivity, refreshability, repeatability, low cost of manufacture, and ease of use. The project goal is to answer these needs through the use of mats of functionalized metal nanoparticle-coated nanosprings as a novel type of low-cost nanomaterials-based gas sensor. The advantage of this approach is that very dilute quantities of airborne explosive products can be accumulated over a few seconds to a few minutes onto our high surface area nanospring electrodes. This will facilitate electronic detection, which in contrast to optical detection methods reduces false positive signals, reduces detector sizes and complexity.

  5. Explosion containment device

    Science.gov (United States)

    Benedick, William B.; Daniel, Charles J.

    1977-01-01

    The disclosure relates to an explosives storage container for absorbing and containing the blast, fragments and detonation products from a possible detonation of a contained explosive. The container comprises a layer of distended material having sufficient thickness to convert a portion of the kinetic energy of the explosion into thermal energy therein. A continuous wall of steel sufficiently thick to absorb most of the remaining kinetic energy by stretching and expanding, thereby reducing the momentum of detonation products and high velocity fragments, surrounds the layer of distended material. A crushable layer surrounds the continuous steel wall and accommodates the stretching and expanding thereof, transmitting a moderate load to the outer enclosure. These layers reduce the forces of the explosion and the momentum of the products thereof to zero. The outer enclosure comprises a continuous pressure wall enclosing all of the layers. In one embodiment, detonation of the contained explosive causes the outer enclosure to expand which indicates to a visual observer that a detonation has occurred.

  6. Surface explosion cavities

    CERN Document Server

    Benusiglio, Adrien; Clanet, Christophe

    2012-01-01

    We present a fluid dynamics video on cavities created by explosions of firecrackers at the water free surface. We use three types of firecrackers containing 1, 1.3 and 5 g of flash powder. The firecrackers are held with their center at the surface of water in a cubic meter pool. The movies are recorded from the side with a high-speed video camera. Without confinement the explosion produces an hemispherical cavity. Right after the explosion this cavity grows isotropically, the bottom then stops while the sides continue to expand. In the next phase the bottom of the cavity accelerates backwards to the surface. During this phase the convergence of the flow creates a central jet that rises above the free surface. In the last part of the video the explosion is confined in a vertical open tube made of glass and of centimetric diameter. The explosion creates a cylindrical cavity that develops towards the free end of the tube. Depending on the charge, the cavity can either stop inside the tube or at its exit, but nev...

  7. Characteristics of regional seismic waves from large explosive events including Korean nuclear explosions

    Science.gov (United States)

    Jo, Eunyoung; Lee, Ha-sung

    2015-04-01

    Three North Korean underground nuclear explosion (UNE) tests were conducted in 2006, 2009 and 2013. Discrimination of explosions from natural earthquakes is important in monitoring the seismic activity in the Korean Peninsula. The UNEs were well recorded by dense regional seismic networks in South Korea. The UNEs provide unique regional seismic waveforms with high signal-to-noise ratios. However, the continental crust in the Korean Peninsula changes abruptly into a transitional structure between continental and oceanic crusts across the eastern coast. The complex geological and tectonic structures around the Korean Peninsula cause significant variations in regional waveforms. Outstanding question is whether conventional discrimination techniques can be applicable for explosions including the North Korean UNEs. P/S amplitude ratios are widely used for seismic discrimination. To understand the regional shear-energy composition, we analyze the frequency contents of waveforms. The shear-energy contents for the UNEs are compared with those for natural earthquakes with comparable magnitudes. The result shows that the UNEs are successfully discriminated from earthquakes in the Korean Peninsula. We also analyze the explosive events from North Korean not UNEs to test the applicability of the discrimination technique. The result of high frequency Pn/Sn regional discrimination in the explosions show that as magnitude of event is smaller, available distance of discrimination is decreased particularly in high frequency range. The poor signal to noise ratio of Pn phase in the explosions, and inefficient propagation of Sn phase in the Western part of the peninsula frustrate Pn/Sn discriminant, while the UNEs show good performance using both discriminants because of propagation path effects in the eastern part of the peninsula.

  8. Recent Methodological Developments in Magnitude Determination and Yield Estimation with Applications to Semipalatinsk Explosions

    Science.gov (United States)

    1991-07-16

    0.093 -159.773 -21.212 Rarotonga , Cook Islands region RCD 0.370 -0.217 -0.139 -103.208 44.075 Rapid city, South Dakota RIV 0.300 151.158 -33.829...posi- tive in shields regions such as Australia, India, Canada, and Scandinavia; and they are negative in the east Africa rift valleys, island arcs...For instance, Pacific island arcs are believed to have high attenuation, low Pn velocities as well as negative station terms. However, North’s (1977

  9. Pyroshock Prediction of Ridge-Cut Explosive Bolts Using Hydrocodes

    Directory of Open Access Journals (Sweden)

    Juho Lee

    2016-01-01

    Full Text Available Pyrotechnic release devices such as explosive bolts are prevalent for many applications due to their merits: high reliability, high power-to-weight ratio, reasonable cost, and more. However, pyroshock generated by an explosive event can cause failures in electric components. Although pyroshock propagations are relatively well understood through many numerical and experimental studies, the prediction of pyroshock generation is still a very difficult problem. This study proposes a numerical method for predicting the pyroshock of a ridge-cut explosive bolt using a commercial hydrocode (ANSYS AUTODYN. A numerical model is established by integrating fluid-structure interaction and complex material models for high explosives and metals, including high explosive detonation, shock wave transmission and propagation, and stress wave propagation. To verify the proposed numerical scheme, pyroshock measurement experiments of the ridge-cut explosive bolts with two types of surrounding structures are performed using laser Doppler vibrometers (LDVs. The numerical analysis results provide accurate prediction in both the time (acceleration and frequency domains (maximax shock response spectra. In maximax shock response spectra, the peaks due to vibration modes of the structures are observed in both the experimental and numerical results. The numerical analysis also helps to identify the pyroshock generation source and the propagation routes.

  10. Luminescent metal-organic framework-functionalized graphene oxide nanocomposites and the reversible detection of high explosives

    Science.gov (United States)

    Lee, Ji Ha; Jaworski, Justyn; Jung, Jong Hwa

    2013-08-01

    Achieving both high specificity and sensitivity are essential for gas phase chemical detection systems. Recent implementation of Metal-Organic Frameworks (MOFs) have shown great success in separation and storage systems for specific gas molecules. By implementing a MOF structure comprised of Zn2+ coordinated trans-stilbene derivatives, a gas responsive material has been created which exhibits a high photoluminescence quantum yield, offering new opportunities for chemical sensors. Here, we reveal a nanocomposite material, assembled from azobenzene functionalized graphene oxide and stilbene-MOF, that is capable of luminescent quenching by explosive gases. This unique system displays selectivity to dinitrotoluene (71% quenching) over trinitrotoluene (20% quenching) with sub ppm sensitivity and response times of less than a minute. We show that this implementation of a graphene-based MOF composite provides a unique strategy in the development of molecularly well-defined materials having rapid, reversible, and gas selective fluorescent quenching capabilities. This opens the way for new advances in the assembly of low density frameworks using isomerization suppressed materials.Achieving both high specificity and sensitivity are essential for gas phase chemical detection systems. Recent implementation of Metal-Organic Frameworks (MOFs) have shown great success in separation and storage systems for specific gas molecules. By implementing a MOF structure comprised of Zn2+ coordinated trans-stilbene derivatives, a gas responsive material has been created which exhibits a high photoluminescence quantum yield, offering new opportunities for chemical sensors. Here, we reveal a nanocomposite material, assembled from azobenzene functionalized graphene oxide and stilbene-MOF, that is capable of luminescent quenching by explosive gases. This unique system displays selectivity to dinitrotoluene (71% quenching) over trinitrotoluene (20% quenching) with sub ppm sensitivity and

  11. Numerical Model for Hydrovolcanic Explosions.

    Science.gov (United States)

    Mader, Charles; Gittings, Michael

    2007-03-01

    A hydrovolcanic explosion is generated by the interaction of hot magma with ground water. It is called Surtseyan after the 1963 explosive eruption off Iceland. The water flashes to steam and expands explosively. Liquid water becomes water gas at constant volume and generates pressures of about 3GPa. The Krakatoa hydrovolcanic explosion was modeled using the full Navier-Stokes AMR Eulerian compressible hydrodynamic code called SAGE [1] which includes the high pressure physics of explosions. The water in the hydrovolcanic explosion was described as liquid water heated by magma to 1100 K. The high temperature water is treated as an explosive with the hot liquid water going to water gas. The BKW [2] steady state detonation state has a peak pressure of 8.9 GPa, a propagation velocity of 5900 meters/sec and the water is compressed to 1.33 g/cc. [1] Numerical Modeling of Water Waves, Second Edition, Charles L. Mader, CRC Press 2004. [2] Numerical Modeling of Explosions and Propellants, Charles L. Mader, CRC Press 1998.

  12. SOLID PHASE MICROEXTRACTION SAMPLING OF HIGH EXPLOSIVE RESIDUES IN THE PRESENCE OF RADIONUCLIDES AND RADIONUCLIDE SURROGATE METALS

    Energy Technology Data Exchange (ETDEWEB)

    Duff, M; S Crump, S; Robert02 Ray, R; Donna Beals, D

    2007-04-13

    The Federal Bureau of Investigation (FBI) Laboratory currently does not have on site facilities for handling radioactive evidentiary materials and there are no established FBI methods or procedures for decontaminating high explosive (HE) evidence while maintaining evidentiary value. One experimental method for the isolation of HE residue involves using solid phase microextraction or SPME fibers to remove residue of interest. Due to their high affinity for organics, SPME fibers should have little affinity for most metals. However, no studies have measured the affinity of radionuclides for SPME fibers. The focus of this research was to examine the affinity of dissolved radionuclide ({sup 239/240}Pu, {sup 238}U, {sup 237}Np, {sup 85}Sr, {sup 133}Ba, {sup 137}Cs, {sup 60}Co and {sup 226}Ra) and stable radionuclide surrogate metals (Sr, Co, Ir, Re, Ni, Ba, Cs, Nb, Zr, Ru, and Nd) for SPME fibers at the exposure conditions that favor the uptake of HE residues. Our results from radiochemical and mass spectrometric analyses indicate these metals have little measurable affinity for these SPME fibers during conditions that are conducive to HE residue uptake with subsequent analysis by liquid or gas phase chromatography with mass spectrometric detection.

  13. The risk of hydrogen explosion in a submarine p. IV The implementation of high risk projects

    Directory of Open Access Journals (Sweden)

    Kłos Ryszard

    2017-06-01

    Full Text Available This series of articles on high risk projects looks at the example of the modernisation of hydrogen incinerators on a submarine. The article describes problems connected with the management of such a project.

  14. Explosive Pleuritis

    Directory of Open Access Journals (Sweden)

    Jasdeep K Sharma

    2001-01-01

    Full Text Available The objective of the present paper is to describe the clinical and computed tomography features of 'explosive pleuritis', an entity first named by Braman and Donat in 1986, and to propose a case definition. A case report of a previously healthy, 45-year-old man admitted to hospital with acute onset pleuritic chest pain is presented. The patient arrived at the emergency room at 15:00 in mild respiratory distress; the initial chest x-ray revealed a small right lower lobe effusion. The subsequent clinical course in hospital was dramatic. Within 18 h of admission, he developed severe respiratory distress with oxygen desaturation to 83% on room air and dullness of the right lung field. A repeat chest x-ray, taken the morning after admission, revealed complete opacification of the right hemithorax. A computed tomography scan of the thorax demonstrated a massive pleural effusion with compression of pulmonary tissue and mediastinal shift. Pleural fluid biochemical analysis revealed the following concentrations: glucose 3.5 mmol/L, lactate dehydrogenase 1550 U/L, protein 56.98 g/L, amylase 68 U/L and white blood cell count 600 cells/mL. The pleural fluid cultures demonstrated light growth of coagulase-negative staphylococcus and viridans streptococcus, and very light growth of Candida albicans. Cytology was negative for malignant cells. Thoracotomy was performed, which demonstrated a loculated parapneumonic effusion that required decortication. The patient responded favourably to the empirical administration of intravenous levofloxacin and ceftriaxone, and conservative surgical methods in the management of the empyema. This report also discusses the patient's rapidly progressing pleural effusion and offers a potential case definition for explosive pleuritis. Explosive pleuritis is a medical emergency defined by the rapid development of a pleural effusion involving more than 90% of the hemithorax over 24 h, which causes compression of pulmonary tissue and

  15. Quantum cascade laser FM spectroscopy of explosives

    Science.gov (United States)

    Gutmann, Zach; Clasp, Trocia; Lue, Chris; Johnson, Tiffani; Ingle, Taylor; Jamison, Janet; Buchanan, Roger; Reeve, Scott

    2013-05-01

    Polyisobutylene is an industrial polymer that is widely used in a number of applications including the manufacture of military grade explosives. We have examined the vapor emanating from a series of different molecular weight samples of polyisobutylene using high resolution Quantum Cascade Laser FM spectroscopy. The vapor phase spectra all exhibit a rovibrational structure similar to that for the gas phase isobutylene molecule. We have assigned the structure in the 890 cm-1 and 1380 cm-1 regions to the isobutylene ν28 and ν7 fundamental bands respectively. These spectroscopic signatures may prove useful for infrared sensing applications. Here we will present the infrared signatures along with recent GCMS data from a sample of C4, utilizing solid-phase microextraction vapor collection fibers, which confirm the presence of isobutylene as one of the volatile bouquet species in RDX-based explosives.

  16. Influence of spectral resolution, spectral range and signal-to-noise ratio of Fourier transform infra-red spectra on identification of high explosive substances.

    Science.gov (United States)

    Banas, Krzysztof; Banas, Agnieszka M; Heussler, Sascha P; Breese, Mark B H

    2018-01-05

    In the contemporary spectroscopy there is a trend to record spectra with the highest possible spectral resolution. This is clearly justified if the spectral features in the spectrum are very narrow (for example infra-red spectra of gas samples). However there is a plethora of samples (in the liquid and especially in the solid form) where there is a natural spectral peak broadening due to collisions and proximity predominately. Additionally there is a number of portable devices (spectrometers) with inherently restricted spectral resolution, spectral range or both, which are extremely useful in some field applications (archaeology, agriculture, food industry, cultural heritage, forensic science). In this paper the investigation of the influence of spectral resolution, spectral range and signal-to-noise ratio on the identification of high explosive substances by applying multivariate statistical methods on the Fourier transform infra-red spectral data sets is studied. All mathematical procedures on spectral data for dimension reduction, clustering and validation were implemented within R open source environment. Copyright © 2017 Elsevier B.V. All rights reserved.

  17. Influence of spectral resolution, spectral range and signal-to-noise ratio of Fourier transform infra-red spectra on identification of high explosive substances

    Science.gov (United States)

    Banas, Krzysztof; Banas, Agnieszka M.; Heussler, Sascha P.; Breese, Mark B. H.

    2018-01-01

    In the contemporary spectroscopy there is a trend to record spectra with the highest possible spectral resolution. This is clearly justified if the spectral features in the spectrum are very narrow (for example infra-red spectra of gas samples). However there is a plethora of samples (in the liquid and especially in the solid form) where there is a natural spectral peak broadening due to collisions and proximity predominately. Additionally there is a number of portable devices (spectrometers) with inherently restricted spectral resolution, spectral range or both, which are extremely useful in some field applications (archaeology, agriculture, food industry, cultural heritage, forensic science). In this paper the investigation of the influence of spectral resolution, spectral range and signal-to-noise ratio on the identification of high explosive substances by applying multivariate statistical methods on the Fourier transform infra-red spectral data sets is studied. All mathematical procedures on spectral data for dimension reduction, clustering and validation were implemented within R open source environment.

  18. High aspect ratio micro-explosions in the bulk of sapphire generated by femtosecond Bessel beams.

    Science.gov (United States)

    Rapp, L; Meyer, R; Giust, R; Furfaro, L; Jacquot, M; Lacourt, P A; Dudley, J M; Courvoisier, F

    2016-09-27

    Femtosecond pulses provide an extreme degree of confinement of light matter-interactions in high-bandgap materials because of the nonlinear nature of ionization. It was recognized very early on that a highly focused single pulse of only nanojoule energy could generate spherical voids in fused silica and sapphire crystal as the nanometric scale plasma generated has energy sufficient to compress the material around it and to generate new material phases. But the volumes of the nanometric void and of the compressed material are extremely small. Here we use single femtosecond pulses shaped into high-angle Bessel beams at microjoule energy, allowing for the creation of very high 100:1 aspect ratio voids in sapphire crystal, which is one of the hardest materials, twice as dense as glass. The void volume is 2 orders of magnitude higher than those created with Gaussian beams. Femtosecond and picosecond illumination regimes yield qualitatively different damage morphologies. These results open novel perspectives for laser processing and new materials synthesis by laser-induced compression.

  19. High-precision (p,t) reactions to determine reaction rates of explosive stellar processes

    NARCIS (Netherlands)

    Matić, Andrija

    2007-01-01

    The aim of my study was to investigate the nuclear structure of 22Mg and 26Si. These two nuclei play a significant role in stellar reaction processes at high temperatures. On base of the obtained nuclear structure we calculated the stellar reaction rates for the following reactions: 18Ne(α,p)21Na,

  20. ACUTE EFFECTS OF PRE-EVENT LOWER LIMB MASSAGE ON EXPLOSIVE AND HIGH SPEED MOTOR CAPACITIES AND FLEXIBILITY

    Directory of Open Access Journals (Sweden)

    Ramiz Arabaci

    2008-12-01

    Full Text Available The aim of this study was to examine the acute effects of pre- performance lower limb massage after warm-up on explosive and high-speed motor capacities and flexibility. Twenty-four physically active healthy Caucasian male subjects volunteered to participate in this study. All subjects were from a Physical Education and Sport Department in a large university in Turkey. The study had a counterbalanced crossover design. Each of the subjects applied the following intervention protocols in a randomised order; (a massage, (b stretching, and (c rest. Before (pre and after (post each of the interventions, the 10 meter acceleration (AS, flying start 20 meter sprint (FS, 30 meter sprint from standing position (TS, leg reaction time (LR, vertical jump (VJ and sit & reach (SR tests were performed. A Wilcoxon's signed rank test was used to compare before and after test values within the three interventions (massage, stretching and rest. The data showed a significant worsening, after massage and stretching interventions, in the VJ, LR (only in stretching intervention, AS and TS tests (p < 0.05, and significant improvement in the SR test (p < 0.05. In contrast, the rest intervention led only to a significant decrement in TS performance (p < 0.05. In conclusion, the present findings suggest that performing 10 minute posterior and 5 minute anterior lower limb Swedish massage has an adverse effect on vertical jump, speed, and reaction time, and a positive effect on sit and reach test results

  1. Explosive Formulation Pilot Plant

    Data.gov (United States)

    Federal Laboratory Consortium — The Pilot Plant for Explosive Formulation supports the development of new explosives that are comprised of several components. This system is particularly beneficial...

  2. Energetic Residues and Crater Geometries from the Firing of 120-mm High-Explosive Mortar Projectiles into Eagle River Flats, June 2007

    Science.gov (United States)

    2008-07-01

    method, but with three new randomly chosen starting points. Figure 5. Sampling of 200 m × 200 m cell. Each point was cleared with a metal detector for...propellant burn was visible (despite the blackened surface produced by the June burn (Fig. 3e). Because of the uncertainty of the exact location of the...detect a metallic signal, indicating that the projectile penetrated several meters. Analysis for Comp B Residue No high-explosives residues were

  3. A fluorescent sensor for highly selective detection of nitroaromatic explosives based on a 2D, extremely stable, metal-organic framework.

    Science.gov (United States)

    Zhang, Shu-Ran; Du, Dong-Ying; Qin, Jun-Sheng; Bao, Shao-Juan; Li, Shun-Li; He, Wen-Wen; Lan, Ya-Qian; Shen, Ping; Su, Zhong-Min

    2014-03-24

    A 2D, extremely stable, metal-organic framework (MOF), NENU-503, was successfully constructed. It displays highly selective and recyclable properties in detection of nitroaromatic explosives as a fluorescent sensor. This is the first MOF that can distinguish between nitroaromatic molecules with different numbers of NO2 groups. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Acute effects of pre-event lower limb massage on explosive and high speed motor capacities and flexibility.

    Science.gov (United States)

    Arabaci, Ramiz

    2008-01-01

    The aim of this study was to examine the acute effects of pre- performance lower limb massage after warm-up on explosive and high-speed motor capacities and flexibility. Twenty-four physically active healthy Caucasian male subjects volunteered to participate in this study. All subjects were from a Physical Education and Sport Department in a large university in Turkey. The study had a counterbalanced crossover design. Each of the subjects applied the following intervention protocols in a randomised order; (a) massage, (b) stretching, and (c) rest. Before (pre) and after (post) each of the interventions, the 10 meter acceleration (AS), flying start 20 meter sprint (FS), 30 meter sprint from standing position (TS), leg reaction time (LR), vertical jump (VJ) and sit & reach (SR) tests were performed. A Wilcoxon's signed rank test was used to compare before and after test values within the three interventions (massage, stretching and rest). The data showed a significant worsening, after massage and stretching interventions, in the VJ, LR (only in stretching intervention), AS and TS tests (p performance (p performing 10 minute posterior and 5 minute anterior lower limb Swedish massage has an adverse effect on vertical jump, speed, and reaction time, and a positive effect on sit and reach test results. Key pointsPerforming 10 minute posterior and 5 minute anterior lower limb Swedish massages has an adverse affect on vertical jump, speed, and reaction time and a positive effect on sit and reach test results.According to the present results, long duration massage should not be recommended for warm-ups.Larger subject pools are needed to verify these events.

  5. Estimation of body exposure to explosion.

    Science.gov (United States)

    Oliver, William R; Baker, Andrew M; Powell, James D; Cotone, Chris M; Meeker, Jeffrey

    2002-09-01

    An ordnance-disposal expert was killed while disposing of a cache of explosives. The likely position of the body was reconstructed by modeling the explosion as an omnidirectional emission of particles from a model of the explosion site and noting the distribution of particles on a model of a human. The applications and limitations of this method in reconstructing the events and correlation with the injuries noted at autopsy are discussed.

  6. Explosive Welding of Pipes

    Science.gov (United States)

    Drennov, Oleg; Drennov, Andrey; Burtseva, Olga

    2013-06-01

    For connection by welding it is suggested to use the explosive welding method. This method is rather new. Nevertheless, it has become commonly used among the technological developments. This method can be advantageous (saving material and physical resources) comparing to its statical analogs (electron-beam welding, argon-arc welding, plasma welding, gas welding, etc.), in particular, in hard-to-reach areas due to their geographic and climatic conditions. Explosive welding of cylindrical surfaces is performed by launching of welded layer along longitudinal axis of construction. During this procedure, it is required to provide reliable resistance against radial convergent strains. The traditional method is application of fillers of pipe cavity, which are dense cylindrical objects having special designs. However, when connecting pipes consecutively in pipelines by explosive welding, removal of the fillers becomes difficult and sometimes impossible. The suggestion is to use water as filler. The principle of non-compressibility of liquid under quasi-dynamic loading is used. In one-dimensional gasdynamic and elastic-plastic calculations we determined non-deformed mass of water (perturbations, which are moving in the axial direction with sound velocity, should not reach the layer end boundaries for 5-7 circulations of shock waves in the radial direction). Linear dimension of the water layer from the zone of pipe coupling along axis in each direction is >= 2R, where R is the internal radius of pipe.

  7. Degassing vs. eruptive styles at Mt. Etna volcano (Sicily, Italy): Volatile stocking, gas fluxing, and the shift from low-energy to highly-explosive basaltic eruptions

    Science.gov (United States)

    Moretti, Roberto; Métrich, Nicole; Di Renzo, Valeria; Aiuppa, Alessandro; Allard, Patrick; Arienzo, Ilenia

    2017-04-01

    Basaltic magmas can transport and release large amounts of volatiles into the atmosphere, especially in subduction zones, where slab-derived fluids enrich the mantle wedge. Depending on magma volatile content, basaltic volcanoes thus display a wide spectrum of eruptive styles, from common Strombolian-type activity to Plinian events. Mt. Etna in Sicily, is a typical basaltic volcano where the volatile control on such a variable activity can be investigated. Based on a melt inclusion study in products from Strombolian or lava-fountain activity to Plinian eruptions, here we show that for the same initial volatile content, different eruptive styles reflect variable degassing paths throughout the composite Etnean plumbing system. The combined influence of i) crystallization, ii) deep degassing and iii) CO2 gas fluxing can explain the evolution of H2O, CO2, S and Cl in products from such a spectrum of activity. Deep crystallization produces the CO2-rich gas fluxing the upward magma portions, which will become buoyant and easily mobilized in small gas-rich batches stored within the plumbing system. When reaching gas dominated conditions (i.e., a gas/melt mass ratio of 0.3 and CO2,gas/H2Ogas molar ratio 5 ), these will erupt effusively or mildly explosively, whilst in case of the 122 BC Plinian eruption, open-system degassing conditions took place within the plumbing system, such that continuous CO2-fluxing determined gas accumulation on top of the magmatic system. The emission of such a cap in the early eruptive phase triggered the arrival of deep H2O-rich whose fast decompression and bubble nucleation lead to the highly explosive character, enhanced by abundant microlite crystallization and consequent increase of magma effective viscosity. This could explain why open system basaltic systems like Etna may experience highly explosive or even Plinian episodes during eruptions that start with effusive to mildly explosive phases. The proposed mechanism also determines a

  8. Chemical profiling of explosives

    NARCIS (Netherlands)

    Brust, G.M.H.

    2014-01-01

    The primary goal of this thesis is to develop analytical methods for the chemical profiling of explosives. Current methodologies for the forensic analysis of explosives focus on identification of the explosive material. However, chemical profiling of explosives becomes increasingly important, as

  9. Luminescent metal-organic frameworks as explosive sensors.

    Science.gov (United States)

    Banerjee, Debasis; Hu, Zhichao; Li, Jing

    2014-07-28

    Metal organic frameworks (MOFs) are of enormous current interest not only because of their fundamental importance but also due to their great potential for possible applications in gas storage and separation, catalysis, imaging and sensing, to name a few. Recent studies on luminescent MOFs (LMOFs) in both bulk and nanoparticle forms have shown that these materials possess excellent luminescence emission properties that may be utilized to effectively detect high explosive substances. Developing highly sensitive, selective, fast-responding and fully reversible sensors for explosives' detection is in great demand for the homeland security, environmental safety and other humanitarian concerns. In this perspective article, we discuss the development, possible mechanism and future aspects of explosive sensing by LMOF materials.

  10. Supernova explosions

    CERN Document Server

    Branch, David

    2017-01-01

    Targeting advanced students of astronomy and physics, as well as astronomers and physicists contemplating research on supernovae or related fields, David Branch and J. Craig Wheeler offer a modern account of the nature, causes and consequences of supernovae, as well as of issues that remain to be resolved. Owing especially to (1) the appearance of supernova 1987A in the nearby Large Magellanic Cloud, (2) the spectacularly successful use of supernovae as distance indicators for cosmology, (3) the association of some supernovae with the enigmatic cosmic gamma-ray bursts, and (4) the discovery of a class of superluminous supernovae, the pace of supernova research has been increasing sharply. This monograph serves as a broad survey of modern supernova research and a guide to the current literature. The book’s emphasis is on the explosive phases of supernovae. Part 1 is devoted to a survey of the kinds of observations that inform us about supernovae, some basic interpreta tions of such data, and an overview of t...

  11. Suppression of stratified explosive interactions

    Energy Technology Data Exchange (ETDEWEB)

    Meeks, M.K.; Shamoun, B.I.; Bonazza, R.; Corradini, M.L. [Wisconsin Univ., Madison, WI (United States). Dept. of Nuclear Engineering and Engineering Physics

    1998-01-01

    Stratified Fuel-Coolant Interaction (FCI) experiments with Refrigerant-134a and water were performed in a large-scale system. Air was uniformly injected into the coolant pool to establish a pre-existing void which could suppress the explosion. Two competing effects due to the variation of the air flow rate seem to influence the intensity of the explosion in this geometrical configuration. At low flow rates, although the injected air increases the void fraction, the concurrent agitation and mixing increases the intensity of the interaction. At higher flow rates, the increase in void fraction tends to attenuate the propagated pressure wave generated by the explosion. Experimental results show a complete suppression of the vapor explosion at high rates of air injection, corresponding to an average void fraction of larger than 30%. (author)

  12. Explosive Blast Neuropathology and Seizures

    Directory of Open Access Journals (Sweden)

    S. Krisztian eKovacs

    2014-04-01

    Full Text Available Traumatic brain injury (TBI due to explosive blast exposure is a leading combat casualty. It is also implicated as a key contributor to war related mental health diseases. A clinically important consequence of all types of TBI is a high risk for development of seizures and epilepsy. Seizures have been reported in patients who have suffered blast injuries in the Global War on Terror but the exact prevalence is unknown. The occurrence of seizures supports the contention that explosive blast leads to both cellular and structural brain pathology. Unfortunately, the exact mechanism by which explosions cause brain injury is unclear, which complicates development of meaningful therapies and mitigation strategies. To help improve understanding, detailed neuropathological analysis is needed. For this, histopathological techniques are extremely valuable and indispensable. In the following we will review the pathological results, including those from immunohistochemical and special staining approaches, from recent preclinical explosive blast studies.

  13. Mechanical and microstructural characterization of a HMX-based pressed explosive: Effects of combined high pressure and strain rate

    Science.gov (United States)

    Trumel, H.; Lambert, P.; Biessy, M.

    2012-08-01

    The paper presents a study of the combined effects of strain rate and confining pressure on the behaviour and microstructure evolutions of a HMX-based explosive. Hopkinson bar compression experiments are carried-out on samples confined with a brass sleeve. The latter is instrumented in order to determine the confining pressure on the explosive sample, directly function of the sleeve thickness and yield strength. A sample confined at 75 MPa and deformed at 250s-1 is recovered, cross-sectioned and studied using optical microscopy. Distributed microplasticity and microcracking appear similar to those induced by confined quasi-static experiments, indicating that stress triaxiality is the most important loading parameter. The sample also displays a large shear macrocrack, resulting from the formation of an adiabatic shear band. Shear banding seems to proceed by strong plastic strain gradients, followed by dynamic re-crystallization. Further strong thermal effects are observed, resulting in local reactive melting.

  14. Mechanical and microstructural characterization of a HMX-based pressed explosive: Effects of combined high pressure and strain rate

    Directory of Open Access Journals (Sweden)

    Biessy M.

    2012-08-01

    Full Text Available The paper presents a study of the combined effects of strain rate and confining pressure on the behaviour and microstructure evolutions of a HMX-based explosive. Hopkinson bar compression experiments are carried-out on samples confined with a brass sleeve. The latter is instrumented in order to determine the confining pressure on the explosive sample, directly function of the sleeve thickness and yield strength. A sample confined at 75 MPa and deformed at 250s−1 is recovered, cross-sectioned and studied using optical microscopy. Distributed microplasticity and microcracking appear similar to those induced by confined quasi-static experiments, indicating that stress triaxiality is the most important loading parameter. The sample also displays a large shear macrocrack, resulting from the formation of an adiabatic shear band. Shear banding seems to proceed by strong plastic strain gradients, followed by dynamic re-crystallization. Further strong thermal effects are observed, resulting in local reactive melting.

  15. An explosive-degrading cytochrome P450 activity and its targeted application for the phytoremediation of RDX.

    Science.gov (United States)

    Rylott, Elizabeth L; Jackson, Rosamond G; Edwards, James; Womack, Grant L; Seth-Smith, Helena M B; Rathbone, Deborah A; Strand, Stuart E; Bruce, Neil C

    2006-02-01

    The widespread presence in the environment of hexahydro-1,3,5-trinitro-1,3,5-triazine (RDX), one of the most widely used military explosives, has raised concern owing to its toxicity and recalcitrance to degradation. To investigate the potential of plants to remove RDX from contaminated soil and water, we engineered Arabidopsis thaliana to express a bacterial gene xplA encoding an RDX-degrading cytochrome P450 (ref. 1). We demonstrate that the P450 domain of XplA is fused to a flavodoxin redox partner and catalyzes the degradation of RDX in the absence of oxygen. Transgenic A. thaliana expressing xplA removed and detoxified RDX from liquid media. As a model system for RDX phytoremediation, A. thaliana expressing xplA was grown in RDX-contaminated soil and found to be resistant to RDX phytotoxicity, producing shoot and root biomasses greater than those of wild-type plants. Our work suggests that expression of xplA in landscape plants may provide a suitable remediation strategy for sites contaminated by this class of explosives.

  16. Atmospheric emission of NOx from mining explosives: A critical review

    Science.gov (United States)

    Oluwoye, Ibukun; Dlugogorski, Bogdan Z.; Gore, Jeff; Oskierski, Hans C.; Altarawneh, Mohammednoor

    2017-10-01

    High-energy materials such as emulsions, slurries and ammonium-nitrate fuel-oil (ANFO) explosives play crucial roles in mining, quarrying, tunnelling and many other infrastructure activities, because of their excellent transport and blasting properties. These explosives engender environmental concerns, due to atmospheric pollution caused by emission of dust and nitrogen oxides (NOx) from blasts, the latter characterised by the average emission factor of 5 kg (t AN explosive)-1. This first-of-its-kind review provides a concise literature account of the formation of NOx during blasting of AN-based explosives, employed in surface operations. We estimate the total NOx emission rate from AN-based explosives as 0.05 Tg (i.e., 5 × 104 t) N per annum, compared to the total global annual anthropogenic NOx emissions of 41.3 × 106 t N y-1. Although minor in the global sense, the large localised plumes from blasting exhibit high NOx concentration (500 ppm) exceeding up to 3000 times the international standards. This emission has profound consequences at mining sites and for adjacent atmospheric environment, necessitating expensive management of exclusion zones. The review describes different types of AN energetic materials for civilian applications, and summarises the essential properties and terminologies pertaining to their use. Furthermore, we recapitulate the mechanisms that lead to the formation of the reactive nitrogen species in blasting of AN-based explosives, review their implications to atmospheric air pollution, and compare the mechanisms with those experienced in other thermal and combustion operations. We also examine the mitigation approaches, including guidelines and operational-control measures. The review discusses the abatement technologies such as the formulation of new explosive mixtures, comprising secondary fuels, spin traps and other additives, in light of their effectiveness and efficiency. We conclude the review with a summary of unresolved problems

  17. 76 FR 8923 - Explosive Siting Requirements

    Science.gov (United States)

    2011-02-16

    ... launch site in Title 14, Code of Federal Regulations (14 CFR) part 420. Part of the application for a... operational requirements of other regulatory regimes, they do not pose a risk of fire or explosion. Isolating... explosion due to the mixing of the two. In accordance with current DDESB and National Fire Protection...

  18. Explosives signatures and analysis

    Science.gov (United States)

    Fountain, Augustus Way, III; Oyler, Jonathan M.; Ostazeski, Stanley A.

    2008-04-01

    The challenge of sampling explosive materials for various high threat military and civilian operational scenarios requires the community to identify and exploit other chemical compounds within the mixtures that may be available to support stand-off detection techniques. While limited surface and vapor phase characterization of IEDs exist, they are insufficient to guide the future development and evaluation of field deployable explosives detection (proximity and standoff) capabilities. ECBC has conducted a limited investigation of three artillery ammunition types to determine what chemical vapors, if any, are available for sensing; the relative composition of the vapors which includes the more volatile compounds in munitions, i.e., plastersizers and binders; and the sensitivity needed detect these vapors at stand-off. Also in partnership with MIT-Lincoln Laboratory, we performed a background measurement campaign at the National Training Center to determine the baseline ambient amounts and variability of nitrates and nitro-ester compounds as vapors, particulates, and on surfaces; as well as other chemical compounds related to non-energetic explosive additives. Environmental persistence studies in contexts relevant to counter-IED sensing operations, such as surface residues, are still necessary.

  19. Understanding vented gas explosions

    Energy Technology Data Exchange (ETDEWEB)

    Lautkaski, R. [VTT Energy, Espoo (Finland). Energy Systems

    1997-12-31

    The report is an introduction to vented gas explosions for nonspecialists, particularly designers of plants for flammable gases and liquids. The phenomena leading to pressure generation in vented gas explosions in empty and congested rooms are reviewed. The four peak model of vented gas explosions is presented with simple methods to predict the values of the individual peaks. Experimental data on the external explosion of dust and gas explosions is discussed. The empirical equation relating the internal and external peak pressures in vented dust explosions is shown to be valid for gas explosion tests in 30 m{sup 3} and 550 m{sup 3} chambers. However, the difficulty of predicting the internal peak pressure in large chambers remains. Methods of explosion relief panel design and principles of vent and equipment layout to reduce explosion overpressures are reviewed. (orig.) 65 refs.

  20. Application of a dynamic photoelasticity technique for the study of two- and three-dimensional structures under seismic, shock, and explosive loads effect

    Science.gov (United States)

    Kostin, Ivan K.; Dvalishvili, V. V.; Ureneva, E. V.; Freishist, N. A.; Fjodorov, A. V.; Dmitriyenko, O. L.

    1991-12-01

    This paper considers the examples of the experimental solution of some engineering dynamic problems studied at the Photoelasticity Laboratory of Moscow Civil Engineering Institute: the stress state of the holes located either near the free surface or deep in the medium under the impulsive and seismic loadings; the stress state of concrete gravitational dams; the defensive effect of screens under the loading by surfacing explosives; and three-dimensional dynamic stress state of forging hammer striking elements. The present dynamic photoelasticity technique state-of-the-art allows for study of various engineering constructions and structures in elastic conditions under the effect of wave loads. Through the past years, technique development was mainly directed to experiment facility perfection (utilizing new high-speed cameras; development of effective ways of loading the models, as well as three-dimensional and volumetric structures with the help of magnetic inductors; application of holographic interferometry with mono- and multipulse lasers) and research procedure development of stress waves in the plane and volumetric elastic problem, anisotropic and viscoelastic media. In the problems of wave mechanics, one basic parameter determining the stress state of structures or constructions is the relation between construction geometric characteristics and the length of the wave effect. A dynamic photoelasticity technique allows wide variation of this relation and an easy change of a construction geometric configuration, thus determining the laws of wave phenomena taking place in the models studied. In simulating underground holes, lateral dimensions of which are comparable with the distance from the free surface and with the length of propagating waves, a seismic stress state is defined in wave conditions by a direct experiment. In this case we have to take into account a variety of wave types affecting the cavity and the basic stress change of the environment in the

  1. 27 CFR 555.63 - Explosives magazine changes.

    Science.gov (United States)

    2010-04-01

    ... 27 Alcohol, Tobacco Products and Firearms 3 2010-04-01 2010-04-01 false Explosives magazine... § 555.63 Explosives magazine changes. (a) General. (1) The requirements of this section are applicable to magazines used for other than temporary (under 24 hours) storage of explosives. (2) A magazine is...

  2. Explosives detection technology for commercial aviation security

    Science.gov (United States)

    Schafrik, Robert E.

    1994-03-01

    The threat posed to commercial aviation by small, concealed plastic explosives is particularly onerous. Small amounts of these highly energetic explosives are difficult to reliably detect using current technologies. But they can cause significant damage to an aircraft that can result in the destruction of the aircraft, resulting in loss of life. The key issues regarding explosive detection technologies include: What methods can detect plastic explosives? How do these methods perform in practice? How can the different methods be best employed to counter the terrorist threat?

  3. Inspection tester for explosives

    Science.gov (United States)

    Haas, Jeffrey S.; Simpson, Randall L.; Satcher, Joe H.

    2007-11-13

    An inspection tester that can be used anywhere as a primary screening tool by non-technical personnel to determine whether a surface contains explosives. It includes a body with a sample pad. First and second explosives detecting reagent holders and dispensers are operatively connected to the body and the sample pad. The first and second explosives detecting reagent holders and dispensers are positioned to deliver the explosives detecting reagents to the sample pad. A is heater operatively connected to the sample pad.

  4. Photoacoustic Sensing of Explosives

    Science.gov (United States)

    2013-11-01

    weight (6 kg), and its power require- ments (24 W) allow for the high portability of the system. Laser vibrometer measurement, 2 meters from target...2515 P ar tic le v el oc ity (× 1 0 μ m /s ) −1 −2 2 0 1 −1 −2 2 0 1 −1 −2 2 0 1 The laser vibrometer and processing algorithms clearly...technique is depicted for a moving system. Note that the laser vibrometer measures the vibrations caused by the explosive vaporization process. At the same

  5. 75 FR 5545 - Explosives

    Science.gov (United States)

    2010-02-03

    ... for classifying, labeling, and providing safety data sheets for explosives. By withdrawing this.... OSHA-S031-2006-0665 and OSHA-S-031)] RIN 1218-AC09 Explosives AGENCY: Occupational Safety and Health... the rulemaking to amend its Explosives and Blasting Agents Standard at 29 CFR 1910.109. OSHA is taking...

  6. Motor for High Temperature Applications

    Science.gov (United States)

    Roopnarine (Inventor)

    2013-01-01

    A high temperature motor has a stator with poles formed by wire windings, and a rotor with magnetic poles on a rotor shaft positioned coaxially within the stator. The stator and rotor are built up from stacks of magnetic-alloy laminations. The stator windings are made of high temperature magnet wire insulated with a vitreous enamel film, and the wire windings are bonded together with ceramic binder. A thin-walled cylinder is positioned coaxially between the rotor and the stator to prevent debris from the stator windings from reaching the rotor. The stator windings are wound on wire spools made of ceramic, thereby avoiding need for mica insulation and epoxy/adhesive. The stator and rotor are encased in a stator housing with rear and front end caps, and rear and front bearings for the rotor shaft are mounted on external sides of the end caps to keep debris from the motor migrating into the bearings' races.

  7. Sunset Crater, AZ: Evolution of a highly explosive basaltic eruption as indicated by granulometry and clast componentry

    Science.gov (United States)

    Allison, C. M.; Clarke, A. B.; Pioli, L.; Alfano, F.

    2011-12-01

    Basaltic scoria cone volcanoes are the most abundant volcanic edifice on Earth and occur in all tectonic settings. Basaltic magmas have lower viscosities, higher temperatures, and lower volatile contents than silicic magmas, and therefore generally have a lower potential for explosive activity. However, basaltic eruptions display great variability in eruptive style, from mild lava flows to more energetic explosions with large plumes. The San Francisco Volcanic Field (SFVF) in northern Arizona, active from 6 Ma-present, consists of over 600 volcanoes, mostly alkali basalt scoria cones, and five silicic centers [Wood and Kienle (1990), Cambridge University Press]. The eruption of Sunset Crater in the SFVF during the Holocene was an anomalously large basaltic explosive eruption, consisting of eight tephra-bearing phases and three lava flows [Amos (1986), MS thesis, ASU]. Typical scoria cone-forming eruptions have volumes gold glassy and iridescent surfaces. The glassy and iridescent clasts likely represent fresh, juvenile ejecta, which were quenched rapidly, whereas the red and grey rounded clasts may be the result of recycling of the cone or vent-fill material. Alternatively, the differences among the populations may represent lateral variations in conduit flow conditions. In general, phases associated with large volumes and large dispersal areas tend to contain larger proportions of the glassy/iridescent clasts. Phase 1 has a large proportion of glassy clasts. Phase 2 has approximately half red and half grey clasts, as well as a small fraction of glassy material. Phase 3, which is the phase with the largest dispersal area, has a similar proportion of glassy clasts as phase 1. Phase 4, the largest by volume at ~0.11km3 DRE [Amos (1986)], has the highest proportion of glassy clasts. Phase 5 is comparable to phase 4 (similar fractions of each clast type), although the glassy surface changes from gold to black as clast size decreases. Each phase is well- to very well

  8. Performance evaluation of granular activated carbon system at Pantex: Rapid small-scale column tests to simulate removal of high explosives from contaminated groundwater

    Energy Technology Data Exchange (ETDEWEB)

    Henke, J.L.; Speitel, G.E. [Univ. of Texas, Austin, TX (United States). Dept. of Civil Engineering

    1998-08-01

    A granular activated carbon (GAC) system is now in operation at Pantex to treat groundwater from the perched aquifer that is contaminated with high explosives. The main chemicals of concern are RDX and HMX. The system consists of two GAC columns in series. Each column is charged with 10,000 pounds of Northwestern LB-830 GAC. At the design flow rate of 325 gpm, the hydraulic loading is 6.47 gpm/ft{sup 2}, and the empty bed contact time is 8.2 minutes per column. Currently, the system is operating at less than 10% of its design flow rate, although flow rate increases are expected in the relatively near future. This study had several objectives: Estimate the service life of the GAC now in use at Pantex; Screen several GACs to provide a recommendation on the best GAC for use at Pantex when the current GAC is exhausted and is replaced; Determine the extent to which natural organic matter in the Pantex groundwater fouls GAC adsorption sites, thereby decreasing the adsorption capacity for high explosives; and Determine if computer simulation models could match the experimental results, thereby providing another tool to follow system performance.

  9. Aeronautical applications of high-temperature superconductors

    Science.gov (United States)

    Turney, George E.; Luidens, Roger W.; Uherka, Kenneth; Hull, John

    1989-01-01

    The successful development of high-temperature superconductors (HTS) could have a major impact on future aeronautical propulsion and aeronautical flight vehicle systems. A preliminary examination of the potential application of HTS for aeronautics indicates that significant benefits may be realized through the development and implementation of these newly discovered materials. Applications of high-temperature superconductors (currently substantiated at 95 k) were envisioned for several classes of aeronautical systems, including subsonic and supersonic transports, hypersonic aircraft, V/STOL aircraft, rotorcraft, and solar, microwave and laser powered aircraft. Introduced and described are the particular applications and potential benefits of high-temperature superconductors as related to aeronautics and/or aeronautical systems.

  10. High-Level Application Framework for LCLS

    Energy Technology Data Exchange (ETDEWEB)

    Chu, P; Chevtsov, S.; Fairley, D.; Larrieu, C.; Rock, J.; Rogind, D.; White, G.; Zalazny, M.; /SLAC

    2008-04-22

    A framework for high level accelerator application software is being developed for the Linac Coherent Light Source (LCLS). The framework is based on plug-in technology developed by an open source project, Eclipse. Many existing functionalities provided by Eclipse are available to high-level applications written within this framework. The framework also contains static data storage configuration and dynamic data connectivity. Because the framework is Eclipse-based, it is highly compatible with any other Eclipse plug-ins. The entire infrastructure of the software framework will be presented. Planned applications and plug-ins based on the framework are also presented.

  11. Comparing oxidative and dilute acid wet explosion pretreatment of Cocksfoot grass at high dry matter concentration for cellulosic ethanol production

    DEFF Research Database (Denmark)

    Njoku, Stephen Ikechukwu; Uellendahl, Hinrich; Ahring, Birgitte Kiær

    2013-01-01

    was investigated for cellulosic ethanol production. The biomass raw materials were pretreated using wet explosion (WEx) at 25% dry matter concentration with addition of oxygen or dilute sulfuric acid. The enzymatic hydrolysis of cellulose was significantly improved after pretreatment. The highest conversion......The choice of a suitable pretreatment method and the adjustment of the pretreatment parameters for efficient conversion of biomass are crucial for a successful biorefinery concept. In this study, cocksfoot grass, a suitable lignocellulosic biomass with a potential for large-scale production...... into cellulose monomeric C6 sugars was achieved for WEx condition AC-E (180°C, 15 min, and 0.2% sulfuric acid). For that condition, the highest ethanol yield of 197 g/kg DM (97% of theoretical maximum value) was achieved for SSF process by Saccharomyces cerevisiae. However, the highest concentration...

  12. Fast, highly selective and sensitive anionic metal-organic framework with nitrogen-rich sites fluorescent chemosensor for nitro explosives detection.

    Science.gov (United States)

    Wang, Xu-Sheng; Li, Lan; Yuan, Da-Qiang; Huang, Yuan-Biao; Cao, Rong

    2018-02-15

    Developing a highly efficient fluorescent sensor for detection of trace amounts of nitro explosives remains a great challenge. Porous metal-organic frameworks (MOFs) are one class of promising fluorescent sensors towards small molecules. Herein, we constructed an anionic Zn-based MOF FJI-C8 based on π-conjugated aromatic ligand H6TDPAT (2,4,6-tris(3,5-dicarboxylphenylamino)-1,3,5-triazine) containing nitrogen-rich sites. On account of the high density of uncoordinated N atoms, the high overlap between the emission spectrum of the anionic MOF FJI-C8 and the UV-vis absorption spectrum of the representative nitro explosive 2,4-dinitrophenol (2,4-DNP), and the porosity of the MOF, FJI-C8 is demonstrated to be an excellent chemosensor for 2,4-DNP with fast response time (less than 30s), high selectivity (Ksv=5.11×104M-1 for 2,4-DNP), extra sensitivity (LOD=0.002866mM for 2,4-DNP), low usage amount (0.04mg/mL), good stability and quantitative detection features. To the best of our knowledge, this is the first example for highly selective detection of 2,4-DNP. More importantly, theoretical calculation and control experiments unveiled that the energy transfer is the main mechanism for highly detection of 2,4-DNP. This work will pave the way for designing highly efficient luminescent chemosensors. Copyright © 2017 Elsevier B.V. All rights reserved.

  13. Explosion Clad for Upstream Oil and Gas Equipment

    Science.gov (United States)

    Banker, John G.; Massarello, Jack; Pauly, Stephane

    2011-01-01

    Today's upstream oil and gas facilities frequently involve the combination of high pressures, high temperatures, and highly corrosive environments, requiring equipment that is thick wall, corrosion resistant, and cost effective. When significant concentrations of CO2 and/or H2S and/or chlorides are present, corrosion resistant alloys (CRA) can become the material of choice for separator equipment, piping, related components, and line pipe. They can provide reliable resistance to both corrosion and hydrogen embrittlement. For these applications, the more commonly used CRA's are 316L, 317L and duplex stainless steels, alloy 825 and alloy 625, dependent upon the application and the severity of the environment. Titanium is also an exceptional choice from the technical perspective, but is less commonly used except for heat exchangers. Explosion clad offers significant savings by providing a relatively thin corrosion resistant alloy on the surface metallurgically bonded to a thick, lower cost, steel substrate for the pressure containment. Developed and industrialized in the 1960's the explosion cladding technology can be used for cladding the more commonly used nickel based and stainless steel CRA's as well as titanium. It has many years of proven experience as a reliable and highly robust clad manufacturing process. The unique cold welding characteristics of explosion cladding reduce problems of alloy sensitization and dissimilar metal incompatibility. Explosion clad materials have been used extensively in both upstream and downstream oil, gas and petrochemical facilities for well over 40 years. The explosion clad equipment has demonstrated excellent resistance to corrosion, embrittlement and disbonding. Factors critical to insure reliable clad manufacture and equipment design and fabrication are addressed.

  14. The effect of explosion parameters on seismic source wavelet calculation and its characteristics

    Science.gov (United States)

    Yimin, Wang; Gang, Tian; Luyang, Yu

    2017-10-01

    This paper focuses on the calculation and analysis of the source wavelet produced by explosions in land seismic exploration, in order to reveal the effect of the explosion parameters on the signal features of seismic records. The calculation process consist of three steps, numerical simulation of explosions in rock and soil, plastic-elastic boundary (PEB) pressure curve fitting and application of the spherical source model. Four groups of explosion parameters are considered, including detonation velocity, charge weight, coupling material and geometry coupling. The study shows that the source wavelets of limestone and sandstone lack of energy in the low frequency range, which can be enlarged by applying a high detonation velocity explosive, a large charge weight and water coupling. The main frequency of source wavelet of loess is relatively low, which can be increased by using a low detonation velocity explosive and a small charge weight. The result is consistent with the field observations and can serve as a guide for selecting the explosion parameters.

  15. Spectroscopic measurement of high-frequency electric fields in the interaction of explosive debris plasma with magnetized background plasma

    Energy Technology Data Exchange (ETDEWEB)

    Bondarenko, A. S., E-mail: AntonBondarenko@ymail.com; Schaeffer, D. B.; Everson, E. T.; Clark, S. E.; Constantin, C. G.; Niemann, C. [Department of Physics and Astronomy, University of California-Los Angeles, Los Angeles, California 90095 (United States)

    2014-12-15

    The collision-less transfer of momentum and energy from explosive debris plasma to magnetized background plasma is a salient feature of various astrophysical and space environments. While much theoretical and computational work has investigated collision-less coupling mechanisms and relevant parameters, an experimental validation of the results demands the measurement of the complex, collective electric fields associated with debris-background plasma interaction. Emission spectroscopy offers a non-interfering diagnostic of electric fields via the Stark effect. A unique experiment at the University of California, Los Angeles, that combines the Large Plasma Device (LAPD) and the Phoenix laser facility has investigated the marginally super-Alfvénic, quasi-perpendicular expansion of a laser-produced carbon (C) debris plasma through a preformed, magnetized helium (He) background plasma via emission spectroscopy. Spectral profiles of the He II 468.6 nm line measured at the maximum extent of the diamagnetic cavity are observed to intensify, broaden, and develop equally spaced modulations in response to the explosive C debris, indicative of an energetic electron population and strong oscillatory electric fields. The profiles are analyzed via time-dependent Stark effect models corresponding to single-mode and multi-mode monochromatic (single frequency) electric fields, yielding temporally resolved magnitudes and frequencies. The proximity of the measured frequencies to the expected electron plasma frequency suggests the development of the electron beam-plasma instability, and a simple saturation model demonstrates that the measured magnitudes are feasible provided that a sufficiently fast electron population is generated during C debris–He background interaction. Potential sources of the fast electrons, which likely correspond to collision-less coupling mechanisms, are briefly considered.

  16. Solid state gas sensors for detection of explosives and explosive precursors

    Science.gov (United States)

    Chu, Yun

    The increased number of terrorist attacks using improvised explosive devices (IEDs) over the past few years has made the trace detection of explosives a priority for the Department of Homeland Security. Considerable advances in early detection of trace explosives employing spectroscopic detection systems and other sensing devices have been made and have demonstrated outstanding performance. However, modern IEDs are not easily detectable by conventional methods and terrorists have adapted to avoid using metallic or nitro groups in the manufacturing of IEDs. Instead, more powerful but smaller compounds, such as TATP are being more frequently used. In addition, conventional detection techniques usually require large capital investment, labor costs and energy input and are incapable of real-time identification, limiting their application. Thus, a low cost detection system which is capable of continuous online monitoring in a passive mode is needed for explosive detection. In this dissertation, a thermodynamic based thin film gas sensor which can reliably detect various explosive compounds was developed and demonstrated. The principle of the sensors is based on measuring the heat effect associated with the catalytic decomposition of explosive compounds present in the vapor phase. The decomposition mechanism is complicated and not well known, but it can be affected by many parameters including catalyst, reaction temperature and humidity. Explosives that have relatively high vapor pressure and readily sublime at room temperature, like TATP and 2, 6-DNT, are ideal candidate for vapor phase detection using the thermodynamic gas sensor. ZnO, W2O 3, V2O5 and SnO2 were employed as catalysts. This sensor exhibited promising sensitivity results for TATP, but poor selectivity among peroxide based compounds. In order to improve the sensitivity and selectivity of the thermodynamic sensor, a Pd:SnO2 nanocomposite was fabricated and tested as part of this dissertation. A

  17. Application of High Temperature Superconductors to Accelerators

    CERN Document Server

    Ballarino, A

    2000-01-01

    Since the discovery of high temperature superconductivity, a large effort has been made by the scientific community to investigate this field towards a possible application of the new oxide superconductors to different devices like SMES, magnetic bearings, flywheels energy storage, magnetic shielding, transmission cables, fault current limiters, etc. However, all present day large scale applications using superconductivity in accelerator technology are based on conventional materials operating at liquid helium temperatures. Poor mechanical properties, low critical current density and sensitivity to the magnetic field at high temperature are the key parameters whose improvement is essential for a large scale application of high temperature superconductors to such devices. Current leads, used for transferring currents from the power converters, working at room temperature, into the liquid helium environment, where the magnets are operating, represent an immediate application of the emerging technology of high t...

  18. Communication: Two-step explosion processes of highly charged fullerene cations C{sub 60}{sup q+} (q = 20–60)

    Energy Technology Data Exchange (ETDEWEB)

    Yamazaki, Kaoru; Nakamura, Takashi; Kanno, Manabu; Kono, Hirohiko, E-mail: hirokiko-kono@m.tohoku.ac.jp [Department of Chemistry, Graduate School of Science, Tohoku University, Sendai 980-8578 (Japan); Niitsu, Naoyuki [Department of Chemistry, Graduate School of Science, Tohoku University, Sendai 980-8578 (Japan); Nanosystem Research Institute (NRI), National Institute of Advanced Industrial Science and Technology (AIST), Tsukuba Central 2, 1-1-1 Umezono, Tsukuba 305-8568 (Japan); Ueda, Kiyoshi [Institute of Multidisciplinary Research for Advanced Materials, Tohoku University, Sendai 980-8577 (Japan)

    2014-09-28

    To establish the fundamental understanding of the fragmentation dynamics of highly positive charged nano- and bio-materials, we carried out on-the-fly classical trajectory calculations on the fragmentation dynamics of C{sub 60}{sup q+} (q = 20–60). We used the UB3LYP/3-21G level of density functional theory and the self-consistent charge density-functional based tight-binding theory. For q ≥ 20, we found that a two-step explosion mechanism governs the fragmentation dynamics: C{sub 60}{sup q+} first ejects singly and multiply charged fast atomic cations C{sup z+} (z ≥ 1) via Coulomb explosions on a timescale of 10 fs to stabilize the remaining core cluster. Thermal evaporations of slow atomic and molecular fragments from the core cluster subsequently occur on a timescale of 100 fs to 1 ps. Increasing the charge q makes the fragments smaller. This two-step mechanism governs the fragmentation dynamics in the most likely case that the initial kinetic energy accumulated upon ionization to C{sub 60}{sup q+} by ion impact or X-ray free electron laser is larger than 100 eV.

  19. High Efficiency Power Converter for Low Voltage High Power Applications

    DEFF Research Database (Denmark)

    Nymand, Morten

    and maximum output power. In chapter 3, a detailed analysis of dominant loss factors in high power converters for low voltage applications is presented. The analysis concludes that: • Power transformers for low voltage high power, if properly designed, will have extremely low leakage inductance......The topic of this thesis is the design of high efficiency power electronic dc-to-dc converters for high-power, low-input-voltage to high-output-voltage applications. These converters are increasingly required for emerging sustainable energy systems such as fuel cell, battery or photo voltaic based....... • If optimally designed, boost converters will be much more efficient than comparable buck type converters for high power low voltage applications. • The use of voltage clamp circuits to protect primary switches in boost converters is no longer needed for device protection. On the other hand...

  20. Explosion interaction with water in a tube

    Science.gov (United States)

    Homae, T.; Sugiyama, Y.; Wakabayashi, K.; Matsumura, T.; Nakayama, Y.

    2017-02-01

    As proposed and legislated in Japan, subsurface magazines have an explosive storage chamber, a horizontal passageway, and a vertical shaft for a vent. The authors found that a small amount of water on the floor of the storage chamber mitigated blast pressure remarkably. The mitigation mechanism has been examined more closely. To examine the effect of water, the present study assesses explosions in a transparent, square cross section, and a straight tube. A high-speed camera used to observe the tube interior. Blast pressure in and around the tube was also measured. Images obtained using the high-speed camera revealed that water inside the tube did not move after the explosion. Differences between cases of tubes without water and with water were unclear. Along with blast pressure measurements, these study results suggest that blast pressure mitigation by water occurs because of interaction between the explosion and the water near the explosion point.

  1. Explosive micro-bubble actuator

    NARCIS (Netherlands)

    van den Broek, D.M.; Elwenspoek, Michael Curt

    2007-01-01

    Explosive evaporation occurs when a thin layer of liquid reaches a very high temperature in a very short time. At these temperatures homogeneous nucleation takes place. The nucleated bubbles almost instantly coalesce forming a vapour film followed by rapid growth due to the pressure impulse and

  2. Lead-free primary explosives

    Science.gov (United States)

    Huynh, My Hang V.

    2010-06-22

    Lead-free primary explosives of the formula (cat).sub.Y[M.sup.II(T).sub.X(H.sub.2O).sub.6-X].sub.Z, where T is 5-nitrotetrazolate, and syntheses thereof are described. Substantially stoichiometric equivalents of the reactants lead to high yields of pure compositions thereby avoiding dangerous purification steps.

  3. Laser machining of explosives

    Science.gov (United States)

    Perry, Michael D.; Stuart, Brent C.; Banks, Paul S.; Myers, Booth R.; Sefcik, Joseph A.

    2000-01-01

    The invention consists of a method for machining (cutting, drilling, sculpting) of explosives (e.g., TNT, TATB, PETN, RDX, etc.). By using pulses of a duration in the range of 5 femtoseconds to 50 picoseconds, extremely precise and rapid machining can be achieved with essentially no heat or shock affected zone. In this method, material is removed by a nonthermal mechanism. A combination of multiphoton and collisional ionization creates a critical density plasma in a time scale much shorter than electron kinetic energy is transferred to the lattice. The resulting plasma is far from thermal equilibrium. The material is in essence converted from its initial solid-state directly into a fully ionized plasma on a time scale too short for thermal equilibrium to be established with the lattice. As a result, there is negligible heat conduction beyond the region removed resulting in negligible thermal stress or shock to the material beyond a few microns from the laser machined surface. Hydrodynamic expansion of the plasma eliminates the need for any ancillary techniques to remove material and produces extremely high quality machined surfaces. There is no detonation or deflagration of the explosive in the process and the material which is removed is rendered inert.

  4. High Efficiency Power Converter for Low Voltage High Power Applications

    DEFF Research Database (Denmark)

    Nymand, Morten

    . A detailed analysis of dominant loss factors in high power converters for low voltage applications is presented. The analysis concludes that: • Power transformers for low voltage high power, if properly designed, will have extremely low leakage inductance. • If optimally designed, boost converters......The topic of this thesis is the design of high efficiency power electronic dc-to-dc converters for high-power, low-input-voltage to high-output-voltage applications. These converters are increasingly required for emerging sustainable energy systems such as fuel cell, battery or photo voltaic based......, if a converter is properly designed, primary side voltage clamp circuits will not even work in low voltage high power converters. • Very high conversion efficiency can be achieved. Peak efficiency of 98% and worst case minimum efficiency of 96.8% are demonstrated on a 1.5 kW converter. The ability...

  5. Caribbean AIDS explosion examined.

    Science.gov (United States)

    2000-03-13

    Homophobia, sex tourism, infidelity, and poverty are major factors causing a rapid explosion of AIDS and increasingly infecting women in the Caribbean. The region has the second largest incidence of AIDS in the world after Africa. The number of people with the HIV virus is likely greater than 500,000 and could be as high as 700,000, about twice the previously reported figures. Societal norms encourage homosexuals to have heterosexual relationships, and married men to have extramarital affairs, while poverty forces men and women to prostitution, often with tourists. In addition, a survey of 8100 school children in 4 English-speaking Caribbean islands revealed that 42% of the children had experienced sex before the age of 10 years; 62% had experienced it by age 12. This finding may reflect a high rate of child molestation in the region.

  6. Water waves generated by underwater explosion

    CERN Document Server

    Mehaute, Bernard Le

    1996-01-01

    This is the first book on explosion-generated water waves. It presents the theoretical foundations and experimental results of the generation and propagation of impulsively generated waves resulting from underwater explosions. Many of the theories and concepts presented herein are applicable to other types of water waves, in particular, tsunamis and waves generated by the fall of a meteorite. Linear and nonlinear theories, as well as experimental calibrations, are presented for cases of deep and shallow water explosions. Propagation of transient waves on dissipative, nonuniform bathymetries to

  7. High temperature superconductors for magnetic suspension applications

    Science.gov (United States)

    Mcmichael, C. K.; Cooley, R. S.; Chen, Q. Y.; Ma, K. B.; Lamb, M. A.; Meng, R. L.; Chu, C. W.; Chu, W. K.

    1994-01-01

    High temperature superconductors (HTS) hold the promise for applications in magnetic levitation bearings, vibration damping, and torque coupling. Traditional magnetic suspension systems require active feedback and vibration controls in which power consumption and low frequency vibration are among the major engineering concerns. HTS materials have been demonstrated to be an enabling approach towards such problems due to their flux trapping properties. In our laboratory at TCSUH, we have been conducting a series of experiments to explore various mechanical applications using HTS. We have constructed a 30 lb. model flywheel levitated by a hybrid superconducting magnetic bearing (HSMB). We are also developing a levitated and vibration-dampled platform for high precision instrumentation. These applications would be ideal for space usages where ambient temperature is adequate for HTS to operate properly under greatly reduced cryogenic requirements. We will give a general overview of these potential applications and discuss the operating principles of the HTS devices we have developed.

  8. Explosives tester with heater

    Science.gov (United States)

    Del Eckels, Joel [Livermore, CA; Nunes, Peter J [Danville, CA; Simpson, Randall L [Livermore, CA; Whipple, Richard E [Livermore, CA; Carter, J Chance [Livermore, CA; Reynolds, John G [San Ramon, CA

    2010-08-10

    An inspection tester system for testing for explosives. The tester includes a body and a swab unit adapted to be removeably connected to the body. At least one reagent holder and dispenser is operatively connected to the body. The reagent holder and dispenser contains an explosives detecting reagent and is positioned to deliver the explosives detecting reagent to the swab unit. A heater is operatively connected to the body and the swab unit is adapted to be operatively connected to the heater.

  9. High resolution NMR theory and chemical applications

    CERN Document Server

    Becker, Edwin D

    1969-01-01

    High Resolution NMR: Theory and Chemical Applications focuses on the applications of nuclear magnetic resonance (NMR), as well as chemical shifts, lattices, and couplings. The book first offers information on the theory of NMR, including nuclear spin and magnetic moment, spin lattice relaxation, line widths, saturation, quantum mechanical description of NMR, and ringing. The text then ponders on instrumentation and techniques and chemical shifts. Discussions focus on the origin of chemical shifts, reference compounds, empirical correlations of chemical shifts, modulation and phase detection,

  10. GEM applications outside high energy physics

    CERN Document Server

    Duarte Pinto, Serge

    2013-01-01

    From its invention in 1997, the Gas Electron Multiplier has been applied in nuclear and high energy physics experiments. Over time however, other applications have also exploited the favorable properties of GEMs. The use of GEMs in these applications will be explained in principle and practice. This paper reviews applications in research, beam instrumentation and homeland security. The detectors described measure neutral radiations such as photons, x-rays, gamma rays and neutrons, as well as all kinds of charged radiation. This paper provides an overview of the still expanding range of possibilities of this versatile detector concept.

  11. Explosive Technology Group

    Data.gov (United States)

    Federal Laboratory Consortium — The Explosive Technology Group (ETG) provides diverse technical expertise and an agile, integrated approach to solve complex challenges for all classes of energetic...

  12. Highly ordered binary assembly of silica mesochannels and surfactant micelles for extraction and electrochemical analysis of trace nitroaromatic explosives and pesticides.

    Science.gov (United States)

    Yan, Fei; He, Yayun; Ding, Longhua; Su, Bin

    2015-04-21

    The rapid and sensitive detection of nitroaromatic compounds is of great significance for human health, the environment, and public security. The present work reports on the extraction and electrochemical analysis of trace nitroaromatic compounds, such as explosives and organophosphate pesticides (OPs), using the indium tin oxide (ITO) electrodes modified with a highly ordered and aligned binary assembly of silica mesochannels and micelles (BASMM). With a pore diameter of ca. 2-3 nm, silica mesochannels (SMs) perpendicularly oriented to the ITO electrode surface can provide hard and robust supports to confine the soft cylindrical micelles formed by the aggregation of cationic surfactants, namely, cetyltrimethylammonium bromide (CTAB). Due to the organized self-assembly of hydrocarbon tails of CTAB surfactants, each micelle has a hydrophobic core, which acts as an excellent adsorbent for rapid extraction and preconcentration of trace nitroaromatic compounds from aqueous solutions via the hydrophobic effect. Furthermore, the cylindrical micelles are directly in contact with the underlying electrode surface, to which extracted compounds can freely diffuse and then be reduced therein, thus allowing their determination by means of voltammetry. Using the BASMM/ITO sensor, electrochemical analysis of trace nitroaromatic explosives, including 2,4,6-trinitrotoluene (TNT), 2,4,6-trinitrophenol, 2,6-dinitrotoluene, 3-nitrophenol, and nitrobenzene, and OPs, such as paraoxon, methyl parathion, and fenitrothion, was achieved with a fast response, wide linear range, high sensitivity, and low detection limit at the ppb level. TNT and paraoxon in real apple, tea, and water samples were also determined. By combining the heterogeneous extraction and determination in one ordered binary nanostructure, the BASMM sensor provides a very simple, rapid, and cost-effective way for analysis of nitroaromatic compounds and can be extended to a wide range of lipophilic yet redox-active analytes.

  13. Active explosion barrier performance against methane and coal dust explosions

    National Research Council Canada - National Science Library

    J. J. L. du Plessis

    2015-01-01

    Preventing the propagation of methane or coal dust explosions through the use of active explosion-suppression systems remains one of the most underutilised explosion controls in underground coal mines...

  14. An Improved Shock Model for Bare and Covered Explosives

    Science.gov (United States)

    Scholtes, Gert; Bouma, Richard

    2017-06-01

    TNO developed a toolbox to estimate the probability of a violent event on a ship or other platform, when the munition bunker is hit by e.g. a bullet or fragment from a missile attack. To obtain the proper statistical output, several millions of calculations are needed to obtain a reliable estimate. Because millions of different scenarios have to be calculated, hydrocode calculations cannot be used for this type of application, but a fast and good engineering solutions is needed. At this moment the Haskins and Cook-model is used for this purpose. To obtain a better estimate for covered explosives and munitions, TNO has developed a new model which is a combination of the shock wave model at high pressure, as described by Haskins and Cook, in combination with the expanding shock wave model of Green. This combined model gives a better fit with the experimental values for explosives response calculations, using the same critical energy fluence values for covered as well as for bare explosives. In this paper the theory is explained and results of the calculations for several bare and covered explosives will be presented. To show this, the results will be compared with the experimental values from literature for composition B, Composition B-3 and PBX-9404.

  15. Fast Chromatographic Method for Explosive Profiling

    Directory of Open Access Journals (Sweden)

    Pierre-Hugues Stefanuto

    2015-05-01

    Full Text Available Security control is becoming a major global issue in strategic locations, such as airports, official buildings, and transit stations. The agencies responsible for public security need powerful and sensitive tools to detect warfare agents and explosives. Volatile signature detection is one of the fastest and easiest ways to achieve this task. However, explosive chemicals have low volatility making their detection challenging. In this research, we developed and evaluated fast chromatographic methods to improve the characterization of volatile signatures from explosives samples. The headspace of explosives was sampled with solid phase micro-extraction fiber (SPME. Following this step, classical gas chromatography (GC and comprehensive two-dimensional GC (GC×GC were used for analysis. A fast GC approach allows the elution temperature of each analyte to be decreased, resulting in decreased thermal degradation of sensitive compounds (e.g., nitro explosives. Using fast GC×GC, the limit of detection is further decreased based on the cryo-focusing effect of the modulator. Sampling of explosives and chromatographic separation were optimized, and the methods then applied to commercial explosives samples. Implementation of fast GC methods will be valuable in the future for defense and security forensics applications.

  16. Experimental and Numerical Research on Cylindrical Tubes under Outer Cylindrical Explosive Waves

    OpenAIRE

    Sui Yaguang; Zhang Dezhi; Tang Shiying; Chen Bo

    2017-01-01

    Cylindrical explosive loading has an important application in explosive working, researching on weapon damage, and explosive-driving load. This study uses experimental and numerical methods to study the response of long and thin tubes when subjected to cylindrical explosive loading. The flake-like charge and multipoint initiation technique were adopted to load cylindrical explosive waves. Experimental results showed that the method could produce uniform deformation in certain parts of the lon...

  17. A mass spectrometer based explosives trace detector

    Science.gov (United States)

    Vilkov, Andrey; Jorabchi, Kaveh; Hanold, Karl; Syage, Jack A.

    2011-05-01

    In this paper we describe the application of mass spectrometry (MS) to the detection of trace explosives. We begin by reviewing the issue of explosives trace detection (ETD) and describe the method of mass spectrometry (MS) as an alternative to existing technologies. Effective security screening devices must be accurate (high detection and low false positive rate), fast and cost effective (upfront and operating costs). Ion mobility spectrometry (IMS) is the most commonly deployed method for ETD devices. Its advantages are compact size and relatively low price. For applications requiring a handheld detector, IMS is an excellent choice. For applications that are more stationary (e.g., checkpoint and alternatives to IMS are available. MS is recognized for its superior performance with regard to sensitivity and specificity, which translate to lower false negative and false positive rates. In almost all applications outside of security where accurate chemical analysis is needed, MS is usually the method of choice and is often referred to as the gold standard for chemical analysis. There are many review articles and proceedings that describe detection technologies for explosives. 1,2,3,4 Here we compare MS and IMS and identify the strengths and weaknesses of each method. - Mass spectrometry (MS): MS offers high levels of sensitivity and specificity compared to other technologies for chemical detection. Its traditional disadvantages have been high cost and complexity. Over the last few years, however, the economics have greatly improved and MS is now capable of routine and automated operation. Here we compare MS and IMS and identify the strengths and weaknesses of each method. - Ion mobility spectrometry (IMS): 5 MS-ETD Screening System IMS is similar in concept to MS except that the ions are dispersed by gas-phase viscosity and not by molecular weight. The main advantage of IMS is that it does not use a vacuum system, which greatly reduces the size, cost, and complexity

  18. Application of High Pressure in Food Processing

    Directory of Open Access Journals (Sweden)

    Herceg, Z.

    2011-01-01

    Full Text Available In high pressure processing, foods are subjected to pressures generally in the range of 100 – 800 (1200 MPa. The processing temperature during pressure treatments can be adjusted from below 0 °C to above 100 °C, with exposure times ranging from a few seconds to 20 minutes and even longer, depending on process conditions. The effects of high pressure are system volume reduction and acceleration of reactions that lead to volume reduction. The main areas of interest regarding high-pressure processing of food include: inactivation of microorganisms, modification of biopolymers, quality retention (especially in terms of flavour and colour, and changes in product functionality. Food components responsible for the nutritive value and sensory properties of food remain unaffected by high pressure. Based on the theoretical background of high-pressure processing and taking into account its advantages and limitations, this paper aims to show its possible application in food processing. The paper gives an outline of the special equipment used in highpressure processing. Typical high pressure equipment in which pressure can be generated either by direct or indirect compression are presented together with three major types of high pressure food processing: the conventional (batch system, semicontinuous and continuous systems. In addition to looking at this technology’s ability to inactivate microorganisms at room temperature, which makes it the ultimate alternative to thermal treatments, this paper also explores its application in dairy, meat, fruit and vegetable processing. Here presented are the effects of high-pressure treatment in milk and dairy processing on the inactivation of microorganisms and the modification of milk protein, which has a major impact on rennet coagulation and curd formation properties of treated milk. The possible application of this treatment in controlling cheese manufacture, ripening and safety is discussed. The opportunities

  19. Explosions and static electricity

    DEFF Research Database (Denmark)

    Jonassen, Niels M

    1995-01-01

    The paper deals with the problem of electrostatic discharges as causes of ignition of vapor/gas and dust/gas mixtures. A series of examples of static-caused explosions will be discussed. The concepts of explosion limits, the incendiveness of various discharge types and safe voltages are explained...

  20. Cell phone explosion.

    Science.gov (United States)

    Atreya, Alok; Kanchan, Tanuj; Nepal, Samata; Pandey, Bhuwan Raj

    2016-03-01

    Cell phone explosions and resultant burn injuries are rarely reported in the scientific literature. We report a case of cell phone explosion that occurred when a young male was listening to music while the mobile was plugged in for charging. © The Author(s) 2015.

  1. Development in the Detection and Identification of Explosive Residues.

    Science.gov (United States)

    Beveridge, A D

    1992-06-01

    In the past 2 decades, developments in the sensitivity and selectivity of instrument detectors have significantly improved the detection limits for explosives, particularly nitrated organic compounds. Significant improvements have also been made in clean up and recovery procedures for explosive residues. Methods which also have met the criterion of proven effectiveness in identifying explosive components in "real-world" residues from test explosions have been incorporated into systematic analysis protocols for explosive residues. This article first reviews developments in the application of both traditional and novel methods to analysis of unreacted explosives and explosive residues. Compounds used to formulate commercial, military, and "homemade" explosives are then cross-referenced to the analytical methods that have been specifically applied to them, both as pure chemicals and in explosive mixtures. The subsequent focus is on the combinations of methods used to systematically analyze and positively identify residues from improvised explosive devices, from handswabs derived from persons suspected of handling explosives, and from organic gunshot residue. Technology is available to positively identify virtually any unreacted explosive in residue, but no one method can detect all components of all explosives. Investigators and the courts are best served by well-equipped forensic science laboratories staffed with scientists who have gained experience by the successful analysis of post-blast residues from an explosives range and have comprehensive reference collections of physical material, analytical data, and literature. The greatest progress has been made with respect to nitrated organic compounds, but the new generation of commercial explosive slurries and emulsions which are primarily formulated with inorganic salts and non-nitrated organic compounds offer an ongoing challenge. Copyright © 1992 Central Police University.

  2. Volcanic sulfur dioxide index and volcanic explosivity index inferred from eruptive volume of volcanoes in Jeju Island, Korea: application to volcanic hazard mitigation

    Science.gov (United States)

    Ko, Bokyun; Yun, Sung-Hyo

    2016-04-01

    Jeju Island located in the southwestern part of Korea Peninsula is a volcanic island composed of lavaflows, pyroclasts, and around 450 monogenetic volcanoes. The volcanic activity of the island commenced with phreatomagmatic eruptions under subaqueous condition ca. 1.8-2.0 Ma and lasted until ca. 1,000 year BP. For evaluating volcanic activity of the most recently erupted volcanoes with reported age, volcanic explosivity index (VEI) and volcanic sulfur dioxide index (VSI) of three volcanoes (Ilchulbong tuff cone, Songaksan tuff ring, and Biyangdo scoria cone) are inferred from their eruptive volumes. The quantity of eruptive materials such as tuff, lavaflow, scoria, and so on, is calculated using a model developed in Auckland Volcanic Field which has similar volcanic setting to the island. The eruptive volumes of them are 11,911,534 m3, 24,987,557 m3, and 9,652,025 m3, which correspond to VEI of 3, 3, and 2, respectively. According to the correlation between VEI and VSI, the average quantity of SO2 emission during an eruption with VEI of 3 is 2-8 × 103 kiloton considering that the island was formed under intraplate tectonic setting. Jeju Island was regarded as an extinct volcano, however, several studies have recently reported some volcanic eruption ages within 10,000 year BP owing to the development in age dating technique. Thus, the island is a dormant volcano potentially implying high probability to erupt again in the future. The volcanoes might have explosive eruptions (vulcanian to plinian) with the possibility that SO2 emitted by the eruption reaches stratosphere causing climate change due to backscattering incoming solar radiation, increase in cloud reflectivity, etc. Consequently, recommencement of volcanic eruption in the island is able to result in serious volcanic hazard and this study provides fundamental and important data for volcanic hazard mitigation of East Asia as well as the island. ACKNOWLEDGMENTS: This research was supported by a grant [MPSS

  3. HERMES: A Model to Describe Deformation, Burning, Explosion, and Detonation

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2011-11-22

    HERMES (High Explosive Response to MEchanical Stimulus) was developed to fill the need for a model to describe an explosive response of the type described as BVR (Burn to Violent Response) or HEVR (High Explosive Violent Response). Characteristically this response leaves a substantial amount of explosive unconsumed, the time to reaction is long, and the peak pressure developed is low. In contrast, detonations characteristically consume all explosive present, the time to reaction is short, and peak pressures are high. However, most of the previous models to describe explosive response were models for detonation. The earliest models to describe the response of explosives to mechanical stimulus in computer simulations were applied to intentional detonation (performance) of nearly ideal explosives. In this case, an ideal explosive is one with a vanishingly small reaction zone. A detonation is supersonic with respect to the undetonated explosive (reactant). The reactant cannot respond to the pressure of the detonation before the detonation front arrives, so the precise compressibility of the reactant does not matter. Further, the mesh sizes that were practical for the computer resources then available were large with respect to the reaction zone. As a result, methods then used to model detonations, known as {beta}-burn or program burn, were not intended to resolve the structure of the reaction zone. Instead, these methods spread the detonation front over a few finite-difference zones, in the same spirit that artificial viscosity is used to spread the shock front in inert materials over a few finite-difference zones. These methods are still widely used when the structure of the reaction zone and the build-up to detonation are unimportant. Later detonation models resolved the reaction zone. These models were applied both to performance, particularly as it is affected by the size of the charge, and to situations in which the stimulus was less than that needed for reliable

  4. Wave dynamics of electric explosion in solids

    Science.gov (United States)

    Burkin, V. V.; Kuznetsova, N. S.; Lopatin, V. V.

    2009-05-01

    A mathematical model of an electric explosion is developed that consistently describes the expansion of the explosion channel with regard to the parameters of the discharge circuit of a high-voltage pulse generator, radiation, and propagation of stress waves in a solid. The dynamics of conversion of the stored energy to a wave and the formation of mechanical stresses due to electric explosion in a solid immersed in a liquid are considered. In the context of electro-discharge destruction of hard materials, the resulting stress field and the relationship between the discharge circuit parameters and characteristics of the wave are analyzed and the most efficient discharge modes are determined.

  5. Research on Initiation Sensitivity of Solid Explosive and Planer Initiation System

    OpenAIRE

    Matsuo, N; M Otuka; H Hamasima; K Hokamoto; Itoh, S.

    2016-01-01

    Firstly, recently, there are a lot of techniques being demanded for complex process, various explosive initiation method and highly accurate control of detonation are needed. In this research, the metal foil explosion using high current is focused attention on the method to obtain linear or planate initiation easily, and the main evaluation of metal foil explosion to initiate explosive was conducted. The explosion power was evaluated by observing optically the underwater shock wave generated ...

  6. High-power optics lasers and applications

    CERN Document Server

    Apollonov, Victor V

    2015-01-01

    This book covers the basics, realization and materials for high power laser systems and high power radiation interaction with  matter. The physical and technical fundamentals of high intensity laser optics and adaptive optics and the related physical processes in high intensity laser systems are explained. A main question discussed is: What is power optics? In what way is it different from ordinary optics widely used in cameras, motion-picture projectors, i.e., for everyday use? An undesirable consequence of the thermal deformation of optical elements and surfaces was discovered during studies of the interaction with powerful incident laser radiation. The requirements to the fabrication, performance and quality of optical elements employed within systems for most practical applications are also covered. The high-power laser performance is generally governed by the following: (i) the absorption of incident optical radiation (governed primarily by various absorption mechanisms), (ii) followed by a temperature ...

  7. Inelastic processes in seismic wave generation by underground explosions

    Energy Technology Data Exchange (ETDEWEB)

    Rodean, H.C.

    1980-08-01

    Theories, computer calculations, and measurements of spherical stress waves from explosions are described and compared, with emphasis on the transition from inelastic to almost-elastic relations between stress and strain. Two aspects of nonspherical explosion geometry are considered: tectonic strain release and surface spall. Tectonic strain release affects the generation of surface waves; spall closure may also. The reduced-displacement potential is a common solution (the equivalent elastic source) of the forward and inverse problems, assuming a spherical source. Measured reduced-displacement potentials are compared with potentials calculated as solutions of the direct and inverse problems; there are significant differences between the results of the two types of calculations and between calculations and measurements. The simple spherical model of an explosion is not sufficient to account for observations of explosions over wide ranges of depth and yield. The explosion environment can have a large effect on explosion detection and yield estimation. The best sets of seismic observations for use in developing discrimination techniques are for high-magnitude high-yield explosions; the identification problem is most difficult for low-magnitude low-yield explosions. Most of the presently available explosion data (time, medium, depth, yield, etc.) are for explosions in a few media at the Nevada Test Site; some key questions concerning magnitude vs yield and m/sub b/ vs M/sub s/ relations can be answered only by data for explosions in other media at other locations.

  8. Studying stellar explosions with Athena

    Science.gov (United States)

    O'Brien, P.; Jonker, P.

    Athena is the second large mission selected in the ESA Cosmic Vision plan. With its large collecting area, high spectral-energy resolution (X-IFU instrument) and impressive grasp (WFI instrument), Athena will truly revolutionise X-ray astronomy. The most prodigious sources of high-energy photons are often transitory in nature. Athena will provide the sensitivity and spectral resolution coupled with rapid response to enable the study of the dynamic sky. Potential sources include: distant Gamma-Ray Bursts to probe the reionisation epoch and find missing baryons in the cosmic web; tidal disruption events to reveal dormant supermassive and intermediate-mass black holes; and supernova explosions to understand progenitors and their environments. We illustrate Athenas capabilities and show how it will be able to constrain the nature of explosive transients including gas metallicity and dynamics.

  9. Ranchero Explosive Pulsed Power Experiments

    Energy Technology Data Exchange (ETDEWEB)

    Goforth, J.H.; Atchison, W.L.; Deninger, W.J.; Fowler, C.M.; Herrera, D.H.; King, J.C.; Lopez, E.A.; Oona, H.; Reinovsky, R.E.; Stokes, J.L.; Sena, F.C.; Tabaka, L.J.; Tasker, D.G.; Torres, D.T.; Lindemuth, I.R.; Faehl, R.J.; Keinigs, R.K.; Taylor, A.J.; Rodriguez, G.; Oro, D.M.; Garcia, O.F.; parker, J.V.; Broste, W.B.

    1999-06-27

    The authors are developing the Ranchero high explosive pulsed power (HEPP) system to power cylindrically imploding solid-density liners for hydrodynamics experiments. The near-term goal is to conduct experiments in the regime pertinent to the Atlas Capacitor bank. That is, they will attempt to implode liners of {approximately}50 g mass at velocities approaching 15 km/sec. The basic building block of the HEPP system is a coaxial generator with a 304.8 mm diameter stator, and an initial armature diameter of 152 mm. The armature is expanded by a high explosive (HE) charge detonated simultaneously along its axis. They have reported a variety of experiments conducted with generator modules 43 cm long and have presented an initial design for hydrodynamic liner experiments. In this paper they give a synopsis of their first system test, and a status report on the development of a generator module that is 1.4 m long.

  10. RANCHERO explosive pulsed power experiments

    CERN Document Server

    Goforth, J H; Armijo, E V; Atchison, W L; Bartos, Yu; Clark, D A; Day, R D; Deninger, W J; Faehl, R J; Fowler, C M; García, F P; García, O F; Herrera, D H; Herrera, T J; Keinigs, R K; King, J C; Lindemuth, I R; López, E; Martínez, E C; Martínez, D; McGuire, J A; Morgan, D; Oona, H; Oro, D M; Parker, J V; Randolph, R B; Reinovsky, R E; Rodríguez, G; Stokes, J L; Sena, F C; Tabaka, L J; Tasker, D G; Taylor, A J; Torres, D T; Anderson, H D; Broste, W B; Johnson, J B; Kirbie, H C

    1999-01-01

    The authors are developing the RANCHERO high explosive pulsed power (HEPP) system to power cylindrically imploding solid-density liners for hydrodynamics experiments. Their near-term goal is to conduct experiments in the regime pertinent to the Atlas capacitor bank. That is, they will attempt to implode liners of ~50 g mass at velocities approaching 15 km/sec. The basic building block of the HEPP system is a coaxial generator with a 304.8 mm diameter stator, and an initial armature diameter of 152 mm. The armature is expanded by a high explosive (HE) charge detonated simultaneously along its axis. The authors have reported a variety of experiments conducted with generator modules 43 cm long and have presented an initial design for hydrodynamic liner experiments. In this paper, they give a synopsis of their first system test, and a status report on the development of a generator module that is 1.4 m long. (6 refs).

  11. Innovations in high power fiber laser applications

    Science.gov (United States)

    Beyer, Eckhard; Mahrle, Achim; Lütke, Matthias; Standfuss, Jens; Brückner, Frank

    2012-02-01

    Diffraction-limited high power lasers represent a new generation of lasers for materials processing, characteristic traits of which are: smaller, cost-effective and processing "on the fly". Of utmost importance is the high beam quality of fiber lasers which enables us to reduce the size of the focusing head incl. scanning mirrors. The excellent beam quality of the fiber laser offers a lot of new applications. In the field of remote cutting and welding the beam quality is the key parameter. By reducing the size of the focusing head including the scanning mirrors we can reach scanning frequencies up to 1.5 kHz and in special configurations up to 4 kHz. By using these frequencies very thin and deep welding seams can be generated experienced so far with electron beam welding only. The excellent beam quality of the fiber laser offers a high potential for developing new applications from deep penetration welding to high speed cutting. Highly dynamic cutting systems with maximum speeds up to 300 m/min and accelerations up to 4 g reduce the cutting time for cutting complex 2D parts. However, due to the inertia of such systems the effective cutting speed is reduced in real applications. This is especially true if complex shapes or contours are cut. With the introduction of scanner-based remote cutting systems in the kilowatt range, the effective cutting speed on the contour can be dramatically increased. The presentation explains remote cutting of metal foils and sheets using high brightness single mode fiber lasers. The presentation will also show the effect of optical feedback during cutting and welding with the fiber laser, how those feedbacks could be reduced and how they have to be used to optimize the cutting or welding process.

  12. New fluid for high temperature applications

    Energy Technology Data Exchange (ETDEWEB)

    Riva, M.; Flohr, F. [Solvay Fluor GmbH, Hannover (Germany); Froeba, A.P. [Lehrstuhl fuer Technische Thermodynamik (LTT), Univ. Erlangen (Germany)

    2006-12-15

    As a result of the worldwide increased consumption of energy, energy saving measures come more and more in the focus of commercial acting. Besides the efficiency enhancement of energy consuming systems the utilization of waste heat is an additional possibility of saving energy. Areas where this might be feasible are geothermal power plants, local combined heat and power plants, solar-thermal-systems and high temperature heat pumps (HTHP). All these applications need a transfer fluid which secures the transport of the energy from it's source to the place where it is needed at high temperatures. The paper will start with a description or overview of promising energy sources and their utilization. The thermophysical properties of an azeotropic binary mixture of HFC-365mfc and a per-fluoro-poly-ether (PFPE) which fulfils the requirements on a high temperature working fluid are introduced in the second part of the paper. First results and practical experiences in an ORC process are shown in this context followed by an estimation regarding the saved energy or the improved efficiency respectively for other applications The paper will end with a brief outlook on possible new applications e.g. autarkic systems or immersion cooling of electrical parts. (orig.)

  13. Assessment of microelectronics packaging for high temperature, high reliability applications

    Energy Technology Data Exchange (ETDEWEB)

    Uribe, F.

    1997-04-01

    This report details characterization and development activities in electronic packaging for high temperature applications. This project was conducted through a Department of Energy sponsored Cooperative Research and Development Agreement between Sandia National Laboratories and General Motors. Even though the target application of this collaborative effort is an automotive electronic throttle control system which would be located in the engine compartment, results of this work are directly applicable to Sandia`s national security mission. The component count associated with the throttle control dictates the use of high density packaging not offered by conventional surface mount. An enabling packaging technology was selected and thermal models defined which characterized the thermal and mechanical response of the throttle control module. These models were used to optimize thick film multichip module design, characterize the thermal signatures of the electronic components inside the module, and to determine the temperature field and resulting thermal stresses under conditions that may be encountered during the operational life of the throttle control module. Because the need to use unpackaged devices limits the level of testing that can be performed either at the wafer level or as individual dice, an approach to assure a high level of reliability of the unpackaged components was formulated. Component assembly and interconnect technologies were also evaluated and characterized for high temperature applications. Electrical, mechanical and chemical characterizations of enabling die and component attach technologies were performed. Additionally, studies were conducted to assess the performance and reliability of gold and aluminum wire bonding to thick film conductor inks. Kinetic models were developed and validated to estimate wire bond reliability.

  14. Nuclear explosion locations at the Balapan, Kazakhstan, nuclear test site: the effects of high-precision arrival times and three-dimensional structure

    Science.gov (United States)

    Thurber, Clifford; Trabant, Chad; Haslinger, Florian; Hartog, Renate

    2001-04-01

    We have investigated the potential contributions of improved arrival times (using waveform cross-correlation) and the use of three-dimensional (3-D) velocity models for seismic event location capability. Our analyses are applied to a dataset of nuclear explosions at Balapan, Kazakhstan, for which ground-truth locations and some absolute origin times are available. This ground-truth information allows us to determine excellent origin time estimates for the remaining explosions. The combination of excellent ground-truth location information and high-quality origin time estimates permits us to (1) carry out a detailed examination of the quality of ISC picks, (2) identify probable timing errors in the digital data, (3) evaluate relative and absolute location capability using data from a sparse network, (4) assess the influence of event signal-to-noise ratio (SNR) on relative location accuracy, (5) utilize the Balapan events as a source array for 3-D tomography beneath the test site, and (6) test the influence of 3-D structure (local and global) on relative location accuracy and precision in a "controlled" situation. Our principal finding is that improved arrival times are the primary contributor to improved locations. Joint and individual relocations of Balapan events using the full digital dataset result in average mislocations of less than 1 km and 95% confidence regions of a compatible size. To mimic a CTBT scenario more realistically, we also carry out relocations using very few stations (4-10 observations). Location accuracy degrades somewhat, but the high-quality picks generally result in mislocations less than 10 km, even for events with very large azimuthal gaps. Uncertainty is generally underestimated in these cases. Tests with artificially degraded SNR show that mislocation increases slowly as SNR decreases. 3-D velocity structure makes a smaller contribution to relative location accuracy than accurate time picks. Travel time variations due to global 3-D

  15. Weapons Experiments Division Explosives Operations Overview

    Energy Technology Data Exchange (ETDEWEB)

    Laintz, Kenneth E. [Los Alamos National Laboratory

    2012-06-19

    Presentation covers WX Division programmatic operations with a focus on JOWOG-9 interests. A brief look at DARHT is followed by a high level overview of explosives research activities currently being conducted within in the experimental groups of WX-Division. Presentation covers more emphasis of activities and facilities at TA-9 as these efforts have been more traditionally aligned with ongoing collaborative explosive exchanges covered under JOWOG-9.

  16. Generation of High-Frequency P and S Wave Energy by Rock Fracture During a Buried Explosion

    Science.gov (United States)

    2015-07-20

    speed digital cameras, and monitored the resultant seismic waves using a laser vibrometer (as an ultra-high-frequency seismometer). We originally... laser vibrometers to record particle velocities in the resultant P and S waves. Since no mechanical data was available for candy- glass, we measured...plates photographing them using high-speed digital cameras, and monitoring the resultant seismic waves using laser vibrometers (as an array of

  17. Aging of civil explosives (Poster)

    NARCIS (Netherlands)

    Krabbendam-La Haye, E.L.M.; Klerk, W.P.C. de; Hoen, C. 't; Krämer, R.E.

    2014-01-01

    For the Dutch MoD and police, TNO composed sets with different kinds of civil explosives to train their detection dogs. The manufacturer of these explosives guarantees several years of stability of these explosives. These sets of explosives are used under different conditions, like temperature and

  18. Experimental Explosive Characterization for Counterterrorist Investigation

    Science.gov (United States)

    Etayo, D.; Maestrojuan, I.; Teniente, J.; Ederra, I.; Gonzalo, R.

    2013-08-01

    A THz spectral characterization of different explosives of special interest for the Spanish National Security Forces "Guardia Civil" is presented in this paper. This forensic analysis has been done in the frequency range from 0.060 THz to 3.5 THz using the Teraview TPS Spectra 3000 system in laboratory conditions. With this equipment the refractive index, absorbance and complex permittivity of the explosive samples have been obtained. In this study, some of the most common used explosives (Bullet gunpowder, mine gunpowder, PETN, TNT, RDX) are analysed paying special attention to differences related to the manufacturing process used to elaborate some of them and to the purity of the samples. The different fabrication processes of the explosives lead to the same spectral behaviour and characteristics. At the same time, the inclusion of some additives in the explosive samples does not alter their main electromagnetic properties. The sensitivity limit of the measurement system has been found to be to 10 mg of explosives. These results will be used to design future THz imaging systems that allow to detect and identify them in security and defence applications and/or to complete laboratory studies after a terrorist action.

  19. Explosive Components Facility

    Data.gov (United States)

    Federal Laboratory Consortium — The 98,000 square foot Explosive Components Facility (ECF) is a state-of-the-art facility that provides a full-range of chemical, material, and performance analysis...

  20. Intermittent Explosive Disorder

    Science.gov (United States)

    ... Headache Intermittent explosive disorder Symptoms & causes Diagnosis & treatment Advertisement Mayo Clinic does not endorse companies or products. ... a Job Site Map About This Site Twitter Facebook Google YouTube Pinterest Mayo Clinic is a not- ...

  1. Intermittent Explosive Disorder

    Directory of Open Access Journals (Sweden)

    Lut Tamam

    2011-09-01

    Full Text Available Intermittent explosive disorder is an impulse control disorder characterized by the occurrence of discrete episodes of failure to resist aggressive impulses that result in violent assault or destruction of property. Though the prevalence intermittent explosive disorder has been reported to be relatively rare in frontier studies on the field, it is now common opinion that intermittent explosive disorder is far more common than previously thought especially in clinical psychiatry settings. Etiological studies displayed the role of both psychosocial factors like childhood traumas and biological factors like dysfunctional neurotransmitter systems and genetics. In differential diagnosis of the disorder, disorders involving agression as a symptom such as alcohol and drug intoxication, antisocial and borderline personality disorders, personality changes due to general medical conditions and behavioral disorder should be considered. A combination of pharmacological and psychotherapeutic approaches are suggested in the treatment of the disorder. This article briefly reviews the historical background, diagnostic criteria, epidemiology, etiology and treatment of intermittent explosive disorder.

  2. Explosion suppression system

    Science.gov (United States)

    Sapko, Michael J.; Cortese, Robert A.

    1992-01-01

    An explosion suppression system and triggering apparatus therefor are provided for quenching gas and dust explosions. An electrically actuated suppression mechanism which dispenses an extinguishing agent into the path ahead of the propagating flame is actuated by a triggering device which is light powered. This triggering device is located upstream of the propagating flame and converts light from the flame to an electrical actuation signal. A pressure arming device electrically connects the triggering device to the suppression device only when the explosion is sensed by a further characteristic thereof beside the flame such as the pioneer pressure wave. The light powered triggering device includes a solar panel which is disposed in the path of the explosion and oriented between horizontally downward and vertical. Testing mechanisms are also preferably provided to test the operation of the solar panel and detonator as well as the pressure arming mechanism.

  3. Polymeric binder for explosives

    Science.gov (United States)

    Bissell, E. R.

    1972-01-01

    Chemical reaction for producing a polymer which can be mixed with explosives to produce a rigid material is discussed. Physical and chemical properties of polymers are described and chemical structure of the polymer is illustrated.

  4. Grain-scale Dynamics in Explosives

    Energy Technology Data Exchange (ETDEWEB)

    Reaugh, J E

    2002-09-30

    High explosives can have reactions to external stimuli that range from mild pressure bursts to full detonation. The ability to predict these responses is important for understanding the performance as well as the safety and reliability of these important materials. At present, we have only relatively simple phenomenological computational models for the behavior of high explosives under these conditions. These models are limited by the assumption that the explosive can be treated as homogeneous. In reality the explosive is a highly heterogeneous composite of irregular crystallites and plastic binder. The heterogeneous nature of explosives is responsible for many of their unique mechanical and chemical properties. We use computational models to simulate the response of explosives to external mechanical stimuli at the grain-scale level. The ultimate goal of this work is to understand the detailed processes involved with the material response, so that we can develop realistic material models, which can be used in a hydrodynamics/multi-physics code to model real systems. The new material models will provide a more realistic description of the explosive system during the most critical period of ignition and initiation. The focus of this work is to use the results of grain-scale simulations to develop an advanced macroscopic reactive flow model that is consistent with our understanding of the grain-scale details, and that can incorporate such information quantitatively. The objective is to connect changes to observed properties of the explosive (grain size distribution, binder thickness distribution, void shape, size, and separation distribution, binder mechanical properties, etc.) with predictions of the resulting sensitivity and performance.

  5. Synchrotron Applications of High Magnetic Fields

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    2006-07-01

    This workshop aims at discussing the scientific potential of X-ray diffraction and spectroscopy in magnetic fields above 30 T. Pulsed magnetic fields in the range of 30 to 40 T have recently become available at Spring-8 and the ESRF (European synchrotron radiation facility). This document gathers the transparencies of the 6 following presentations: 1) pulsed magnetic fields at ESRF: first results; 2) X-ray spectroscopy and diffraction experiments by using mini-coils: applications to valence state transition and frustrated magnet; 3) R{sub 5}(Si{sub x}Ge{sub 1-x}){sub 4}: an ideal system to be studied in X-ray under high magnetic field?; 4) high field studies at the Advanced Photon Source: present status and future plans; 5) synchrotron X-ray diffraction studies under extreme conditions; and 6) projects for pulsed and steady high magnetic fields at the ESRF.

  6. High Power Diode Lasers Technology and Applications

    CERN Document Server

    Bachmann, Friedrich; Poprawe, Reinhart

    2007-01-01

    In a very comprehensive way this book covers all aspects of high power diode laser technology for materials processing. Basics as well as new application oriented results obtained in a government funded national German research project are described in detail. Along the technological chain after a short introduction in the second chapter diode laser bar technology is discussed regarding structure, manufacturing technology and metrology. The third chapter illuminates all aspects of mounting and cooling, whereas chapter four gives wide spanning details on beam forming, beam guiding and beam combination, which are essential topics for incoherently coupled multi-emitter based high power diode lasers. Metrology, standards and safety aspects are the theme of chapter five. As an outcome of all the knowledge from chapter two to four various system configurations of high power diode lasers are described in chapter six; not only systems focussed on best available beam quality but especially also so called "modular" set...

  7. High dimensional neurocomputing growth, appraisal and applications

    CERN Document Server

    Tripathi, Bipin Kumar

    2015-01-01

    The book presents a coherent understanding of computational intelligence from the perspective of what is known as "intelligent computing" with high-dimensional parameters. It critically discusses the central issue of high-dimensional neurocomputing, such as quantitative representation of signals, extending the dimensionality of neuron, supervised and unsupervised learning and design of higher order neurons. The strong point of the book is its clarity and ability of the underlying theory to unify our understanding of high-dimensional computing where conventional methods fail. The plenty of application oriented problems are presented for evaluating, monitoring and maintaining the stability of adaptive learning machine. Author has taken care to cover the breadth and depth of the subject, both in the qualitative as well as quantitative way. The book is intended to enlighten the scientific community, ranging from advanced undergraduates to engineers, scientists and seasoned researchers in computational intelligenc...

  8. Experimental studies of the effect of rapid afterburn on shock development of near-field explosions

    OpenAIRE

    Tyas, A.; Reay, J.J.; Fay, S.D.; Clarke, S.D.; Rigby, S.E.; Warren, J.A.; Pope, D.J.

    2016-01-01

    Many conventional high explosives do not contain sufficient internal oxygen to fully combust the gaseous products\\ud which result from detonation of the explosive material. Because of this, under-oxygenated explosives continue\\ud to burn after detonation. This process, called afterburn, is known to influence the late-time pressure and energy\\ud released by the explosive, which has particular significance for confined explosives. Recent experimental work\\ud at the University of Sheffield, alon...

  9. Ocular injuries in survivors of improvised explosive devices (IED) in commuter trains

    OpenAIRE

    Agarwal Vinay; Mehta Salil; Jiandani Prakash

    2007-01-01

    Abstract Background Ocular injuries are common in survivors of terror incidents that involve the use of explosive materials. These explosives are commonly of a High Explosive type (HE) and may be fashioned into improvised explosive devices (IED) that incorporate additional materials to maximise trauma and injuries. Serial IED explosions have occurred in commuter trains in several cities including London and Madrid but data on ocular injuries is limited. We report the ocular injuries of the su...

  10. High temperature reactors for cogeneration applications

    Energy Technology Data Exchange (ETDEWEB)

    Verfondern, Karl [Forschungszentrum Juelich (Germany). IEK-6; Allelein, Hans-Josef [Forschungszentrum Juelich (Germany). IEK-6; RWTH Aachen (Germany). Lehrstuhl fuer Reaktorsicherheit und -technik (LRST)

    2016-05-15

    There is a large potential for nuclear energy also in the non-electric heat market. Many industrial sectors have a high demand for process heat and steam at various levels of temperature and pressure to be provided for desalination of seawater, district heating, or chemical processes. The future generation of nuclear plants will be capable to enter the wide field of cogeneration of heat and power (CHP), to reduce waste heat and to increase efficiency. This requires an adjustment to multiple needs of the customers in terms of size and application. All Generation-IV concepts proposed are designed for coolant outlet temperatures above 500 C, which allow applications in the low and medium temperature range. A VHTR would even be able to cover the whole temperature range up to approx. 1 000 C.

  11. Current characteristics of quasi-planar vacuum diodes with explosive-emission cathodes made of various materials at a high-voltage pulse duration of a few nanoseconds

    Science.gov (United States)

    Afanas'ev, K. V.; Vagner, M. I.; Kutenkov, O. P.; Pegel, I. V.; Pribytkov, G. A.; Rostov, V. V.; Tarakanov, V. P.

    2012-12-01

    The currents of 5-ns pulsed high-current electron beams produced in a planar vacuum diode with explosive-emission cathodes made of various materials with no external magnetic field at an average electric field strength in the gap of about 300 kV/cm have been measured and time-integrated observation of the optical luminescence of the cathode surface have been performed. Cathodes with a ceramic bushing and spring metal contacts, with ceramic plates set in a magnetic iron matrix, with blades made of stamped exfoliated graphite (Graflex), with blades made of foil fiberglass plastic, and a composite cathode made of crystalline boron and copper powders were tested. The current carried by one emission center has been estimated to range between 5 and 20 A for various cathodes. For the metal-dielectric cathode, the velocity of expansion of the cathode plasma over the ceramic surface has been estimated as 2·107 cm/s. The lifetimes of the cathodes at a pulse repetition rate of 50 Hz have been investigated.

  12. Terrorist Event Training in US Medical Schools. A Survey of Chemical, Biologic, Radiologic, Nuclear, and High-Yield Explosives Training in US Medical Schools.

    Science.gov (United States)

    Feeney, James M; Ziegler, Kristina; Armstrong, Jessica M; Shapiro, David

    2015-01-01

    September 11, 2001 saw the dawn of the US-led global war on terror, a combined diplomatic, military, social, and cultural war on terrorist activities. Chemical, biological, radiological, nuclear, and high-yield explosives (CBRNE), as a group of tactics, are often the preferred weapons of terrorists across the globe. We undertook a survey of US medical schools to determine what their self-reported level of training for terrorist events encompasses during the four years of undergraduate medical education. We surveyed 170 medical schools in the US and Puerto Rico using a five-question, internet-based survey, followed by telephone calls to curriculum offices for initial nonresponders. We used simple descriptive statistics to analyze the data. A majority of US medical schools that completed the survey (79 schools or 65.3%) have no required lecture or course on CBRNE or terrorist activities during the first or second year (preclinical years). Ninety-eight out of the 121 respondents (81.0%), however, believed that CBRNE training was either very important or somewhat important, as reflected in survey answers. Most physician educators believe that training in CBRNE is important; however this belief has not resulted in widespread acceptance of a CBRNE curriculum in US medical schools.

  13. Supersensitive fingerprinting of explosives by chemically modified nanosensors arrays

    Science.gov (United States)

    Lichtenstein, Amir; Havivi, Ehud; Shacham, Ronen; Hahamy, Ehud; Leibovich, Ronit; Pevzner, Alexander; Krivitsky, Vadim; Davivi, Guy; Presman, Igor; Elnathan, Roey; Engel, Yoni; Flaxer, Eli; Patolsky, Fernando

    2014-06-01

    The capability to detect traces of explosives sensitively, selectively and rapidly could be of great benefit for applications relating to civilian national security and military needs. Here, we show that, when chemically modified in a multiplexed mode, nanoelectrical devices arrays enable the supersensitive discriminative detection of explosive species. The fingerprinting of explosives is achieved by pattern recognizing the inherent kinetics, and thermodynamics, of interaction between the chemically modified nanosensors array and the molecular analytes under test. This platform allows for the rapid detection of explosives, from air collected samples, down to the parts-per-quadrillion concentration range, and represents the first nanotechnology-inspired demonstration on the selective supersensitive detection of explosives, including the nitro- and peroxide-derivatives, on a single electronic platform. Furthermore, the ultrahigh sensitivity displayed by our platform may allow the remote detection of various explosives, a task unachieved by existing detection technologies.

  14. High temperature superconductors applications in telecommunications

    Energy Technology Data Exchange (ETDEWEB)

    Kumar, A.A.; Li, J.; Zhang, M.F. [Prairie View A& M Univ., Texas (United States)

    1994-12-31

    The purpose of this paper is twofold: to discuss high temperature superconductors with specific reference to their employment in telecommunications applications; and to discuss a few of the limitations of the normally employed two-fluid model. While the debate on the actual usage of high temperature superconductors in the design of electronic and telecommunications devices-obvious advantages versus practical difficulties-needs to be settled in the near future, it is of great interest to investigate the parameters and the assumptions that will be employed in such designs. This paper deals with the issue of providing the microwave design engineer with performance data for such superconducting waveguides. The values of conductivity and surface resistance, which are the primary determining factors of a waveguide performance, are computed based on the two-fluid model. A comparison between two models-a theoretical one in terms of microscopic parameters (termed Model A) and an experimental fit in terms of macroscopic parameters (termed Model B)-shows the limitations and the resulting ambiguities of the two-fluid model at high frequencies and at temperatures close to the transition temperature. The validity of the two-fluid model is then discussed. Our preliminary results show that the electrical transport description in the normal and superconducting phases as they are formulated in the two-fluid model needs to be modified to incorporate the new and special features of high temperature superconductors. Parameters describing the waveguide performance-conductivity, surface resistance and attenuation constant-will be computed. Potential applications in communications networks and large scale integrated circuits will be discussed. Some of the ongoing work will be reported. In particular, a brief proposal is made to investigate of the effects of electromagnetic interference and the concomitant notion of electromagnetic compatibility (EMI/EMC) of high T{sub c} superconductors.

  15. CMOS Image Sensors for High Speed Applications.

    Science.gov (United States)

    El-Desouki, Munir; Deen, M Jamal; Fang, Qiyin; Liu, Louis; Tse, Frances; Armstrong, David

    2009-01-01

    Recent advances in deep submicron CMOS technologies and improved pixel designs have enabled CMOS-based imagers to surpass charge-coupled devices (CCD) imaging technology for mainstream applications. The parallel outputs that CMOS imagers can offer, in addition to complete camera-on-a-chip solutions due to being fabricated in standard CMOS technologies, result in compelling advantages in speed and system throughput. Since there is a practical limit on the minimum pixel size (4∼5 μm) due to limitations in the optics, CMOS technology scaling can allow for an increased number of transistors to be integrated into the pixel to improve both detection and signal processing. Such smart pixels truly show the potential of CMOS technology for imaging applications allowing CMOS imagers to achieve the image quality and global shuttering performance necessary to meet the demands of ultrahigh-speed applications. In this paper, a review of CMOS-based high-speed imager design is presented and the various implementations that target ultrahigh-speed imaging are described. This work also discusses the design, layout and simulation results of an ultrahigh acquisition rate CMOS active-pixel sensor imager that can take 8 frames at a rate of more than a billion frames per second (fps).

  16. CMOS Image Sensors for High Speed Applications

    Directory of Open Access Journals (Sweden)

    M. Jamal Deen

    2009-01-01

    Full Text Available Recent advances in deep submicron CMOS technologies and improved pixel designs have enabled CMOS-based imagers to surpass charge-coupled devices (CCD imaging technology for mainstream applications. The parallel outputs that CMOS imagers can offer, in addition to complete camera-on-a-chip solutions due to being fabricated in standard CMOS technologies, result in compelling advantages in speed and system throughput. Since there is a practical limit on the minimum pixel size (4~5 μm due to limitations in the optics, CMOS technology scaling can allow for an increased number of transistors to be integrated into the pixel to improve both detection and signal processing. Such smart pixels truly show the potential of CMOS technology for imaging applications allowing CMOS imagers to achieve the image quality and global shuttering performance necessary to meet the demands of ultrahigh-speed applications. In this paper, a review of CMOS-based high-speed imager design is presented and the various implementations that target ultrahigh-speed imaging are described. This work also discusses the design, layout and simulation results of an ultrahigh acquisition rate CMOS active-pixel sensor imager that can take 8 frames at a rate of more than a billion frames per second (fps.

  17. 43 CFR 423.30 - Weapons, firearms, explosives, and fireworks.

    Science.gov (United States)

    2010-10-01

    ... fireworks. 423.30 Section 423.30 Public Lands: Interior Regulations Relating to Public Lands BUREAU OF... WATERBODIES Rules of Conduct § 423.30 Weapons, firearms, explosives, and fireworks. (a) You may possess... with applicable Federal, State, and local law. (c) You must not use or possess explosives, or fireworks...

  18. EXPLOSIVE FORMING – ECONOMICAL TECHNOLOGY FOR AEROSPACE STRUCTURES

    OpenAIRE

    Niculae MARIN; Victor GHIZDAVU

    2010-01-01

    The explosive forming represents a technological alternative for obtaining small-lot parts,with inexpensive and efficient manufacturing preparation. The explosive forming processing methodspresent a series of important advantages, being recommended for the wide-scale application in theaerospace industry. The economic benefit varies from case to case, independent from the part type,manufacturing series and user.

  19. EXPLOSIVE FORMING – ECONOMICAL TECHNOLOGY FOR AEROSPACE STRUCTURES

    Directory of Open Access Journals (Sweden)

    Niculae MARIN

    2010-12-01

    Full Text Available The explosive forming represents a technological alternative for obtaining small-lot parts,with inexpensive and efficient manufacturing preparation. The explosive forming processing methodspresent a series of important advantages, being recommended for the wide-scale application in theaerospace industry. The economic benefit varies from case to case, independent from the part type,manufacturing series and user.

  20. Simulating thermal explosion of RDX-based explosives: Model comparison with experiment

    Energy Technology Data Exchange (ETDEWEB)

    Yoh, J J; McClelland, M A; Maienschein, J L; Wardell, J F; Tarver, C M

    2004-10-11

    We compare two-dimensional model results with measurements for the thermal, chemical and mechanical behavior in a thermal explosion experiment. Confined high explosives are heated at a rate of 1 C per hour until an explosion is observed. The heating, ignition, and deflagration phases are modeled using an Arbitrarily Lagrangian-Eulerian code (ALE3D) that can handle a wide range of time scales that vary from a structural to a dynamic hydro time scale. During the pre-ignition phase, quasi-static mechanics and diffusive thermal transfer from a heat source to the HE are coupled with the finite chemical reactions that include both endothermic and exothermic processes. Once the HE ignites, a hydro dynamic calculation is performed as a burn front propagates through the HE. Two RDX-based explosives, C-4 and PBXN-109, are considered, whose chemical-thermal-mechanical models are constructed based on measurements of thermal and mechanical properties along with small scale thermal explosion measurements. The simulated dynamic response of HE confinement during the explosive phase is compared to measurements in large scale thermal explosion tests. The explosion temperatures for both HE's are predicted to within 5 C. Calculated and measured wall strains provide an indication of vessel pressurization during the heating phase and violence during the explosive phase. During the heating phase, simulated wall strains provide only an approximate representation of measured values indicating a better numerical treatment is needed to provide accurate results. The results also show that more numerical accuracy is needed for vessels with lesser confinement strength. For PBXN-109, the measured wall strains during the explosion are well represented by the ALE3D calculations.

  1. Buried explosive hazard characterization using advanced magnetic and electromagnetic induction sensors

    Science.gov (United States)

    Miller, Jonathan S.; Schultz, Gregory; Shah, Vishal

    2013-06-01

    Advanced electromagnetic induction arrays that feature high sensitivity wideband magnetic field and electromagnetic induction receivers provide significant capability enhancement to landmine, unexploded ordnance, and buried explosives detection applications. Specifically, arrays that are easily and quickly configured for integration with a variety of ground vehicles and mobile platforms offer improved safety and efficiency to personnel conducting detection operations including route clearance, explosive ordnance disposal, and humanitarian demining missions. We present experimental results for explosives detection sensor concepts that incorporate both magnetic and electromagnetic modalities. Key technology components include a multi-frequency continuous wave EMI transmitter, multi-axis induction coil receivers, and a high sensitivity chip scale atomic magnetometer. The use of multi-frequency transmitters provides excitation of metal encased threats as well as low conductivity non-metallic explosive constituents. The integration of a radio frequency tunable atomic magnetometer receiver adds increased sensitivity to lower frequency components of the electromagnetic response. This added sensitivity provides greater capability for detecting deeply buried targets. We evaluate the requirements for incorporating these sensor modalities in forward mounted ground vehicle operations. Specifically, the ability to detect target features in near real-time is critical to non-overpass modes. We consider the requirements for incorporating these sensor technologies in a system that enables detection of a broad range of explosive threats that include both metallic and non-metallic components.

  2. Cast Aluminum Alloy for High Temperature Applications

    Science.gov (United States)

    Lee, Jonathan A.

    2003-01-01

    Originally developed by NASA as high performance piston alloys to meet U.S. automotive legislation requiring low exhaust emission, the novel NASA alloys now offer dramatic increase in tensile strength for many other applications at elevated temperatures from 450 F (232 C) to about 750 F (400 C). It is an ideal low cost material for cast automotive components such as pistons, cylinder heads, cylinder liners, connecting rods, turbo chargers, impellers, actuators, brake calipers and rotors. It can be very economically produced from conventional permanent mold, sand casting or investment casting, with silicon content ranging from 6% to 18%. At high silicon levels, the alloy exhibits excellent dimensional stability, surface hardness and wear resistant properties.

  3. Industrial Applications of High Average Power FELS

    CERN Document Server

    Shinn, Michelle D

    2005-01-01

    The use of lasers for material processing continues to expand, and the annual sales of such lasers exceeds $1 B (US). Large scale (many m2) processing of materials require the economical production of laser powers of the tens of kilowatts, and therefore are not yet commercial processes, although they have been demonstrated. The development of FELs based on superconducting RF (SRF) linac technology provides a scaleable path to laser outputs above 50 kW in the IR, rendering these applications economically viable, since the cost/photon drops as the output power increases. This approach also enables high average power ~ 1 kW output in the UV spectrum. Such FELs will provide quasi-cw (PRFs in the tens of MHz), of ultrafast (pulsewidth ~ 1 ps) output with very high beam quality. This talk will provide an overview of applications tests by our facility's users such as pulsed laser deposition, laser ablation, and laser surface modification, as well as present plans that will be tested with our upgraded FELs. These upg...

  4. Escherichia coli O104:H4 Pathogenesis: an Enteroaggregative E. coli/Shiga Toxin-Producing E. coli Explosive Cocktail of High Virulence.

    Science.gov (United States)

    Navarro-Garcia, Fernando

    2014-12-01

    A major outbreak caused by Escherichia coli of serotype O104:H4 spread throughout Europe in 2011. This large outbreak was caused by an unusual strain that is most similar to enteroaggregative E. coli (EAEC) of serotype O104:H4. A significant difference, however, is the presence of a prophage encoding the Shiga toxin, which is characteristic of enterohemorrhagic E. coli (EHEC) strains. This combination of genomic features, associating characteristics from both EAEC and EHEC, represents a new pathotype. The 2011 E. coli O104:H4 outbreak of hemorrhagic diarrhea in Germany is an example of the explosive cocktail of high virulence and resistance that can emerge in this species. A total of 46 deaths, 782 cases of hemolytic-uremic syndrome, and 3,128 cases of acute gastroenteritis were attributed to this new clone of EAEC/EHEC. In addition, recent identification in France of similar O104:H4 clones exhibiting the same virulence factors suggests that the EHEC O104:H4 pathogen has become endemically established in Europe after the end of the outbreak. EAEC strains of serotype O104:H4 contain a large set of virulence-associated genes regulated by the AggR transcription factor. They include, among other factors, the pAA plasmid genes encoding the aggregative adherence fimbriae, which anchor the bacterium to the intestinal mucosa (stacked-brick adherence pattern on epithelial cells). Furthermore, sequencing studies showed that horizontal genetic exchange allowed for the emergence of the highly virulent Shiga toxin-producing EAEC O104:H4 strain that caused the German outbreak. This article discusses the role these virulence factors could have in EAEC/EHEC O104:H4 pathogenesis.

  5. Whole cell bioreporter application for rapid detection and evaluation of crude oil spill in seawater caused by Dalian oil tank explosion.

    Science.gov (United States)

    Zhang, Dayi; Ding, Aizhong; Cui, Shuangchao; Hu, Cheng; Thornton, Steven F; Dou, Junfeng; Sun, Yujiao; Huang, Wei E

    2013-03-01

    Accidents involving the release of crude oil to seawater pose serious threat to human and animal health, fisheries and marine ecosystems. A whole cell bioreporter detection method, which has unique advantages for the rapid evaluation on toxicity and bioavailability, is a useful tool to provide environmental risk assessments at crude oil-contaminated sites. Acinetobacter baylyi ADPWH_alk and ADPWH_recA are chromosomally-based alkane and genotoxicity bioreporters which can be activated to express bioluminescence in the presence of alkanes and genotoxic compounds. In this study, we applied Acinetobacter ADPWH_alk and ADPWH_recA bioreporters to examine six seawater and six sediment samples around the Dalian Bay four weeks after an oil tank explosion in Dalian, China in 2010, and compared the results with samples from the same sites one year after. The results of bioreporter detection suggest that seawater and sediments from five sites (DB, NT, JSB, XHP and FJZ) four weeks after the oil-spill were contaminated by the crude oil with various extents of genotoxicity. Among these six sites, DB and NT had high oil contents and genotoxicity, and JSB had high oil content but low genotoxicity in comparison with an uncontaminated site LSF, which is located at other side of the peninsula. These three sites (DB, NT and JSB) with detectable genotoxicity are within 30 km away from the oil spill point. The far-away two sites XHP (38.1 km) and FJZ (31.1 km) were lightly contaminated with oil but no genotoxicity suggesting that they are around the contamination boundary. Bioreporter detection also indicates that all six sites were clean one year after the oil-spill as the alkane and genotoxicity were below detection limit. This study demonstrates that bioreporter detection can be used as a rapid method to estimate the scale of a crude oil spill accident and to evaluate bioavailability and genotoxicity of contaminated seawater and sediments, which are crucial to risk assessment and

  6. Upon the reconstruction of accidents triggered by tire explosion. Analytical model and case study

    Science.gov (United States)

    Gaiginschi, L.; Agape, I.; Talif, S.

    2017-10-01

    Accident Reconstruction is important in the general context of increasing road traffic safety. In the casuistry of traffic accidents, those caused by tire explosions are critical under the severity of consequences, because they are usually happening at high speeds. Consequently, the knowledge of the running speed of the vehicle involved at the time of the tire explosion is essential to elucidate the circumstances of the accident. The paper presents an analytical model for the kinematics of a vehicle which, after the explosion of one of its tires, begins to skid, overturns and rolls. The model consists of two concurent approaches built as applications of the momentum conservation and energy conservation principles, and allows determination of the initial speed of the vehicle involved, by running backwards the sequences of the road event. The authors also aimed to both validate the two distinct analytical approaches by calibrating the calculation algorithms on a case study

  7. Regional Seismic Methods of Identifying Explosions

    Science.gov (United States)

    Walter, W. R.; Ford, S. R.; Pasyanos, M.; Pyle, M. L.; Hauk, T. F.

    2013-12-01

    A lesson from the 2006, 2009 and 2013 DPRK declared nuclear explosion Ms:mb observations is that our historic collection of data may not be representative of future nuclear test signatures (e.g. Selby et al., 2012). To have confidence in identifying future explosions amongst the background of other seismic signals, we need to put our empirical methods on a firmer physical footing. Here we review the two of the main identification methods: 1) P/S ratios and 2) Moment Tensor techniques, which can be applied at the regional distance (200-1600 km) to very small events, improving nuclear explosion monitoring and confidence in verifying compliance with the Comprehensive Nuclear-Test-Ban Treaty (CTBT). Amplitude ratios of seismic P-to-S waves at sufficiently high frequencies (~>2 Hz) can identify explosions among a background of natural earthquakes (e.g. Walter et al., 1995). However the physical basis for the generation of explosion S-waves, and therefore the predictability of this P/S technique as a function of event properties such as size, depth, geology and path, remains incompletely understood. Calculated intermediate period (10-100s) waveforms from regional 1-D models can match data and provide moment tensor results that separate explosions from earthquakes and cavity collapses (e.g. Ford et al. 2009). However it has long been observed that some nuclear tests produce large Love waves and reversed Rayleigh waves that complicate moment tensor modeling. Again the physical basis for the generation of these effects from explosions remains incompletely understood. We are re-examining regional seismic data from a variety of nuclear test sites including the DPRK and the former Nevada Test Site (now the Nevada National Security Site (NNSS)). Newer relative amplitude techniques can be employed to better quantify differences between explosions and used to understand those differences in term of depth, media and other properties. We are also making use of the Source Physics

  8. Laser based in-situ and standoff detection of chemical warfare agents and explosives

    Science.gov (United States)

    Patel, C. Kumar N.

    2009-09-01

    Laser based detection of gaseous, liquid and solid residues and trace amounts has been developed ever since lasers were invented. However, the lack of availability of reasonably high power tunable lasers in the spectral regions where the relevant targets can be interrogated as well as appropriate techniques for high sensitivity, high selectivity detection has hampered the practical exploitation of techniques for the detection of targets important for homeland security and defense applications. Furthermore, emphasis has been on selectivity without particular attention being paid to the impact of interfering species on the quality of detection. Having high sensitivity is necessary but not a sufficient condition. High sensitivity assures a high probability of detection of the target species. However, it is only recently that the sensor community has come to recognize that any measure of probability of detection must be associated with a probability of false alarm, if it is to have any value as a measure of performance. This is especially true when one attempts to compare performance characteristics of different sensors based on different physical principles. In this paper, I will provide a methodology for characterizing the performance of sensors utilizing optical absorption measurement techniques. However, the underlying principles are equally application to all other sensors. While most of the current progress in high sensitivity, high selectivity detection of CWAs, TICs and explosives involve identifying and quantifying the target species in-situ, there is an urgent need for standoff detection of explosives from safe distances. I will describe our results on CO2 and quantum cascade laser (QCL) based photoacoustic sensors for the detection of CWAs, TICs and explosives as well the very new results on stand-off detection of explosives at distances up to 150 meters. The latter results are critically important for assuring safety of military personnel in battlefield

  9. Application of mid-infrared cavity-ringdown spectroscopy to trace explosives vapor detection using a broadly tunable (6-8 μm) optical parametric oscillator

    Science.gov (United States)

    Todd, M. W.; Provencal, R. A.; Owano, T. G.; Paldus, B. A.; Kachanov, A.; Vodopyanov, K. L.; Hunter, M.; Coy, S. L.; Steinfeld, J. I.; Arnold, J. T.

    A novel instrument, based on cavity-ringdown spectroscopy (CRDS), has been developed for trace gas detection. The new instrument utilizes a widely tunable optical parametric oscillator (OPO), which incorporates a zinc-germanium-phosphide (ZGP) crystal that is pumped at 2.8 μm by a 25-Hz Er,Cr:YSGG laser. The resultant mid-IR beam profile is nearly Gaussian, with energies exceeding 200 μJ/pulse between 6 and 8 μm, corresponding to a quantum conversion efficiency of approximately 35%. Vapor-phase mid-infrared spectra of common explosives (TNT, TATP, RDX, PETN and Tetryl) were acquired using the CRDS technique. Parts-per-billion concentration levels were readily detected with no sample preconcentration. A collection/flash-heating sequence was implemented in order to enhance detection limits for ambient air sampling. Detection limits as low as 75 ppt for TNT are expected, with similar concentration levels for the other explosives.

  10. Automatic Energy Schemes for High Performance Applications

    Energy Technology Data Exchange (ETDEWEB)

    Sundriyal, Vaibhav [Iowa State Univ., Ames, IA (United States)

    2013-01-01

    Although high-performance computing traditionally focuses on the efficient execution of large-scale applications, both energy and power have become critical concerns when approaching exascale. Drastic increases in the power consumption of supercomputers affect significantly their operating costs and failure rates. In modern microprocessor architectures, equipped with dynamic voltage and frequency scaling (DVFS) and CPU clock modulation (throttling), the power consumption may be controlled in software. Additionally, network interconnect, such as Infiniband, may be exploited to maximize energy savings while the application performance loss and frequency switching overheads must be carefully balanced. This work first studies two important collective communication operations, all-to-all and allgather and proposes energy saving strategies on the per-call basis. Next, it targets point-to-point communications to group them into phases and apply frequency scaling to them to save energy by exploiting the architectural and communication stalls. Finally, it proposes an automatic runtime system which combines both collective and point-to-point communications into phases, and applies throttling to them apart from DVFS to maximize energy savings. The experimental results are presented for NAS parallel benchmark problems as well as for the realistic parallel electronic structure calculations performed by the widely used quantum chemistry package GAMESS. Close to the maximum energy savings were obtained with a substantially low performance loss on the given platform.

  11. High Temperature Battery for Drilling Applications

    Energy Technology Data Exchange (ETDEWEB)

    Josip Caja

    2009-12-31

    In this project rechargeable cells based on the high temperature electrochemical system Na/beta''-alumina/S(IV) in AlCl3/NaCl were developed for application as an autonomous power source in oil/gas deep drilling wells. The cells operate in the temperature range from 150 C to 250 C. A prototype DD size cell was designed and built based on the results of finite element analysis and vibration testing. The cell consisted of stainless steel case serving as anode compartment with cathode compartment installed in it and a seal closing the cell. Critical element in cell design and fabrication was hermetically sealing the cell. The seal had to be leak tight, thermally and vibration stable and compatible with electrode materials. Cathode compartment was built of beta''-alumina tube which served as an electrolyte, separator and cathode compartment.

  12. High-Performance Energy Applications and Systems

    Energy Technology Data Exchange (ETDEWEB)

    Miller, Barton [Univ. of Wisconsin, Madison, WI (United States)

    2014-01-01

    The Paradyn project has a history of developing algorithms, techniques, and software that push the cutting edge of tool technology for high-end computing systems. Under this funding, we are working on a three-year agenda to make substantial new advances in support of new and emerging Petascale systems. The overall goal for this work is to address the steady increase in complexity of these petascale systems. Our work covers two key areas: (1) The analysis, instrumentation and control of binary programs. Work in this area falls under the general framework of the Dyninst API tool kits. (2) Infrastructure for building tools and applications at extreme scale. Work in this area falls under the general framework of the MRNet scalability framework. Note that work done under this funding is closely related to work done under a contemporaneous grant, “Foundational Tools for Petascale Computing”, SC0003922/FG02-10ER25940, UW PRJ27NU.

  13. 78 FR 64246 - Commerce in Explosives; List of Explosives Materials

    Science.gov (United States)

    2013-10-28

    ... hydrocarbons. Explosive organic nitrate mixtures. Explosive powders. F Flash powder. ] Fulminate of mercury. Fulminate of silver. Fulminating gold. Fulminating mercury. Fulminating platinum. Fulminating silver. G... fulminate. Mercury oxalate. Mercury tartrate. Metriol trinitrate. Minol-2 . MMAN ; methylamine nitrate...

  14. Symptoms of post-traumatic stress disorder, severe psychological distress, explosive anger and grief amongst partners of survivors of high levels of trauma in post-conflict Timor-Leste.

    Science.gov (United States)

    Silove, D M; Tay, A K; Steel, Z; Tam, N; Soares, Z; Soares, C; Dos Reis, N; Alves, A; Rees, S

    2017-01-01

    Little is known about the mental health of partners of survivors of high levels of trauma in post-conflict countries. We studied 677 spouse dyads (n = 1354) drawn from a community survey (response 82.4%) in post-conflict Timor-Leste. We used culturally adapted measures of post-traumatic stress disorder (PTSD), psychological distress, explosive anger and grief. Latent class analysis identified three classes of couples: class 1, comprising women with higher trauma events (TEs), men with intermediate TEs (19%); class 2, including men with higher TEs, women with lower TEs (23%); and class 3, comprising couples in which men and women had lower TE exposure (58%) (the reference group). Men and women partners of survivors of higher TE exposure (classes 1 and 2) had increased symptoms of explosive anger and grief compared with the reference class (class 3). Women partners of survivors of higher TE exposure (class 2) had a 20-fold increased rate of PTSD symptoms compared with the reference class, a pattern that was not evident for men living with women exposed to higher levels of trauma (class 1). Men and women living with survivors of higher levels of trauma showed an increase in symptoms of grief and explosive anger. The manifold higher rate of PTSD symptoms amongst women living with men exposed to high levels of trauma requires replication. It is important to assess the mental health of partners when treating survivors of high levels of trauma in post-conflict settings.

  15. Quick-closing valve is actuated by explosive discharge

    Science.gov (United States)

    Majeski, S. J.

    1966-01-01

    Remotely controlled plug-type valve shuts off a high-pressure, high-temperature gas flow in a few milliseconds. The valve is actuated by a commercially available electrically initiated squib of low explosive power. More rapid closure is attainable with squibs containing heavier explosive changes.

  16. The application of a figure of merit for nuclear explosive utility as a metric for material attractiveness in a nuclear material theft scenario

    Energy Technology Data Exchange (ETDEWEB)

    King, Wayne E., E-mail: weking@llnl.go [Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States); Bradley, Keith [Global Security Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States); Jones, Edwin D. [Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States); Kramer, Kevin J.; Latkowski, Jeffery F. [Engineering Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States); Robel, Martin [Physical and Life Sciences Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States); Sleaford, Brad W. [Engineering Directorate, Lawrence Livermore National Laboratory, Livermore, CA 94551 (United States)

    2010-11-15

    Effective integration of nonproliferation management into the design process is key to the broad deployment of advanced nuclear energy systems, and is an explicit goal of the Laser Inertial Fusion Energy (LIFE) project at Lawrence Livermore National Laboratory. The nuclear explosives utility of a nuclear material to a state (proliferator) or sub-state (terrorist) is a critical factor to be assessed and is one aspect of material attractiveness. In this work, we approached nuclear explosives utility through the calculation of a 'figure of merit' (FOM) that has recently been developed to capture the relative viability and difficulty of constructing nuclear explosives starting from various nuclear material forms and compositions. We discuss the integration of the figure of merit into an assessment of a nuclear material theft scenario and its use in the assessment. This paper demonstrates that material attractiveness is a multidimensional concept that embodies more than the FOM. It also seeks to propose that other attributes may be able to be quantified through analogous FOMs (e.g., transformation) and that, with quantification, aggregation may be possible using concepts from the risk community.

  17. The use of light detectors to discriminate between detonation and deflagration of explosive charges

    CSIR Research Space (South Africa)

    Olivier, M

    2015-10-01

    Full Text Available of an explosive charge. This information is important during research into new explosives formulations (e.g. Insensitive Munitions) and general explosive related tests. This paper discusses the use of a particular photodiode application, and proposes its use...

  18. Mechanism of unconfined dust explosions: Turbulent clustering and radiation-induced ignition.

    Science.gov (United States)

    Liberman, Michael; Kleeorin, Nathan; Rogachevskii, Igor; Haugen, Nils Erland L

    2017-05-01

    It is known that unconfined dust explosions typically start off with a relatively weak primary flame followed by a severe secondary explosion. We show that clustering of dust particles in a temperature stratified turbulent flow ahead of the primary flame may give rise to a significant increase in the radiation penetration length. These particle clusters, even far ahead of the flame, are sufficiently exposed and heated by the radiation from the flame to become ignition kernels capable to ignite a large volume of fuel-air mixtures. This efficiently increases the total flame surface area and the effective combustion speed, defined as the rate of reactant consumption of a given volume. We show that this mechanism explains the high rate of combustion and overpressures required to account for the observed level of damage in unconfined dust explosions, e.g., at the 2005 Buncefield vapor-cloud explosion. The effect of the strong increase of radiation transparency due to turbulent clustering of particles goes beyond the state of the art of the application to dust explosions and has many implications in atmospheric physics and astrophysics.

  19. Hyperspectral requirements for detection of trace explosives agents

    Science.gov (United States)

    Schau, Harvey C.; Jennette, Bryan D.

    2006-05-01

    The ability to remotely detect explosive devices and explosive materials has generated considerable interest over the last several years. The study of remote sensing of explosives date back many decades but recent world events have forced the technology to respond to changing events and bring new technologies to the field in shorter development times than previously thought possible. Several applications have proven both desirable and illusive to date. Most notable is the desire to sense explosives within containers, sealed or otherwise. This requires a sensing device to penetrate the walls of the container, a difficult task when the container is steel or thick cement. Another is the desire to detect explosive vapors which escape from a container into the ambient air. This has been made difficult because explosives are generally formulated to have extremely low vapor pressure. (This has made many gas detection technique not strong candidates for explosive vapor detection due to the low vapor pressure of explosive materials [1].) Because of the many difficulties in a general explosive remote detection, we have attempted to bound the problem into a series of achievable steps with the first step a simple remote detection of TNT-bearing compounds. Prior to discussing our technology, we will first discuss our choice for attacking the problem in this manner.

  20. Relating pressure measurements to phenomena observed in high speed video recordings during tests of explosive charges in a semi-confined blast chamber

    CSIR Research Space (South Africa)

    Mostert, FJ

    2012-09-01

    Full Text Available video recordings were obtained from the open end of the chamber of the fireball and post detonative behaviour of explosive products. The framing rate of the video camera was 10 000 fps and the pressure measurements were obtained for at least 10 ms after...

  1. High speed imaging, lightning mapping arrays and thermal imaging: a synergy for the monitoring of electrical discharges at the onset of volcanic explosions

    Science.gov (United States)

    Gaudin, Damien; Cimarelli, Corrado; Behnke, Sonja; Cigala, Valeria; Edens, Harald; McNutt, Stefen; Smith, Cassandra; Thomas, Ronald; Van Eaton, Alexa

    2017-04-01

    Volcanic lightning is being increasingly studied, due to its great potential for the detection and monitoring of ash plumes. Indeed, it is observed in a large number of ash-rich volcanic eruptions and it produces electromagnetic waves that can be detected remotely in all weather conditions. Electrical discharges in volcanic plume can also significantly change the structural, chemical and reactivity properties of the erupted material. Although electrical discharges are detected in various regions of the plume, those happening at the onset of an explosion are of particular relevance for the early warning and the study of volcanic jet dynamics. In order to better constrain the electrical activity of young volcanic plumes, we deployed at Sakurajima (Japan) in 2015 a multiparametric set-up including: i) a lightning mapping array (LMA) of 10 VHF antennas recording the electromagnetic waves produced by lightning at a sample rate of 25 Msps; ii) a visible-light high speed camera (5000 frames per second, 0.5 m pixel size, 300 m field of view) shooting short movies (approx. duration 1 s) at different stages of the plume evolution, showing the location of discharges in relation to the plume; and iii) a thermal camera (25 fps, 1.5 m pixel size, 800 m field of view) continuously recording the plume and allowing the estimation of its main source parameters (volume, rise velocity, mass eruption rate). The complementarity of these three setups is demonstrated by comparing and aggregating the data at various stages of the plume development. In the earliest stages, the high speed camera spots discrete small discharges, that appear on the LMA data as peaks superimposed to the continuous radio frequency (CRF) signal. At later stages, flashes happen less frequently and increase in length. The correspondence between high speed camera and LMA data allows to define a direct correlation between the length of the flash and the intensity of the electromagnetic signal. Such correlation is

  2. Thermo-Gas Dynamics of Hydrogen Combustion and Explosion

    CERN Document Server

    Gelfand, Boris E; Medvedev, Sergey P; Khomik, Sergey V

    2012-01-01

    The potential of hydrogen as an important future energy source has generated fresh interest in the study of hydrogenous gas mixtures. Indeed, both its high caloricity and reactivity are unique properties, the latter underscoring safety considerations when handling such mixtures.   The present monograph is devoted to the various aspects of hydrogen combustion and explosion processes. In addition to theoretical and phenomenological considerations, this work also collates the results of many experiments from less well known sources. The text reviews the literature in this respect, thereby providing valuable information about the thermo-gas-dynamical parameters of combustion processes for selected experimental settings in a range of scientific and industrial applications.

  3. High energy laser demonstrators for defense applications

    Science.gov (United States)

    Jung, M.; Riesbeck, Th.; Schmitz, J.; Baumgärtel, Th.; Ludewigt, K.; Graf, A.

    2017-01-01

    Rheinmetall Waffe Munition has worked since 30 years in the area of High Energy Laser (HEL) for defence applications, starting from pulsed CO2 to pulsed glass rods lasers. In the last decade Rheinmetall Waffe Munition changed to diode pumped solid state laser (DPSSL) technology and has successfully developed, realised and tested a variety of versatile HEL weapon demonstrators for air- and ground defence scenarios like countering rocket, artillery, mortar, missile (RAMM), unmanned aerial systems (UAS) and unexploded ordnances clearing. By employing beam superimposing technology and a modular laser weapon concept, the total optical power has been successively increased. Stationary weapon platforms, military vehicles and naval platforms have been equipped with high energy laser effectors. The contribution gives a summary of the most recent development stages of Rheinmetalls HEL weapon program. In addition to the stationary 30 kW laser weapon demonstrator, we present vehicle based HEL demonstrators: the 5 kW class Mobile HEL Effector Track V, the 20 kW class Mobile HEL Effector Wheel XX and the 50 kW class Mobile HEL Effector Container L and the latest 10 kW HEL effector integrated in the naval weapon platform MLG 27. We describe the capabilities of these demonstrators against different potential targets. Furthermore, we will show the capability of the 30 kW stationary Laser Weapon Demonstrator integrated into an existing ground based air defence system to defeat saturated attacks of RAMM and UAS targets.

  4. Coal-preparation baghouse protects against explosion damage

    Energy Technology Data Exchange (ETDEWEB)

    1983-09-01

    Improvements in baghouse containment technology are reducing the risks when air and coal dust mixtures ignite and cause secondary explosions that were formerly vented. The cement industry was quick to adopt the new technology that resembles a circular pressure vessel able to withstand a 50-psi internal pressure and contain secondary explosions. Steps to minimize primary explosions include new standards for baghouse design and construction to eliminate components that cause sparks, electrical grounding, continuous dust removal, high air-to-cloth ratios, and pulse jet cleaning. Other considerations involving baghouse location, maintenance access, fire suppression, and rotary valve sizing can also reduce explosion risks. (DCK)

  5. The gas dynamics of explosions

    CERN Document Server

    Lee,\tJohn H S

    2016-01-01

    Explosions, and the non-steady shock propagation associated with them, continue to interest researchers working in different fields of physics and engineering (such as astrophysics and fusion). Based on the author's course in shock dynamics, this book describes the various analytical methods developed to determine non-steady shock propagation. These methods offer a simple alternative to the direct numerical integration of the Euler equations and offer a better insight into the physics of the problem. Professor Lee presents the subject systematically and in a style that is accessible to graduate students and researchers working in shock dynamics, combustion, high-speed aerodynamics, propulsion and related topics.

  6. Power of TATP based explosives.

    Science.gov (United States)

    Matyás, Robert; Selesovský, Jakub

    2009-06-15

    The power of various explosive mixtures based on triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP), ammonimum nitrate (AN), urea nitrate (UrN) and water (W), namely TATP/AN, oil/AN, TATP/UrN, TATP/W and TATP/AN/W, was studied using the ballistic mortar test. The ternary mixtures of TATP/AN/W have relatively high power in case of the low water contents. Their power decrease significantly with increasing the water content in the mixture to more than 30%.

  7. XIT Commercial Explosives Identification Tool

    Science.gov (United States)

    2014-05-01

    Explosives Identification Tool (XIT) was supported by the Canadian Safety and Security Program ( CSSP ) which is led by Defence Research and Development...Explosives Training Unit, and Toronto Police Service, Explosives Disposal Unit. CSSP is a federally-funded program to strengthen Canada’s ability to

  8. Application of Plasma Waveguides to High Energy Accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Milchberg, Howard M

    2013-03-30

    The eventual success of laser-plasma based acceleration schemes for high-energy particle physics will require the focusing and stable guiding of short intense laser pulses in reproducible plasma channels. For this goal to be realized, many scientific issues need to be addressed. These issues include an understanding of the basic physics of, and an exploration of various schemes for, plasma channel formation. In addition, the coupling of intense laser pulses to these channels and the stable propagation of pulses in the channels require study. Finally, new theoretical and computational tools need to be developed to aid in the design and analysis of experiments and future accelerators. Here we propose a 3-year renewal of our combined theoretical and experimental program on the applications of plasma waveguides to high-energy accelerators. During the past grant period we have made a number of significant advances in the science of laser-plasma based acceleration. We pioneered the development of clustered gases as a new highly efficient medium for plasma channel formation. Our contributions here include theoretical and experimental studies of the physics of cluster ionization, heating, explosion, and channel formation. We have demonstrated for the first time the generation of and guiding in a corrugated plasma waveguide. The fine structure demonstrated in these guides is only possible with cluster jet heating by lasers. The corrugated guide is a slow wave structure operable at arbitrarily high laser intensities, allowing direct laser acceleration, a process we have explored in detail with simulations. The development of these guides opens the possibility of direct laser acceleration, a true miniature analogue of the SLAC RF-based accelerator. Our theoretical studies during this period have also contributed to the further development of the simulation codes, Wake and QuickPIC, which can be used for both laser driven and beam driven plasma based acceleration schemes. We

  9. Explosive detection technology

    Science.gov (United States)

    Doremus, Steven; Crownover, Robin

    2017-05-01

    The continuing proliferation of improvised explosive devices is an omnipresent threat to civilians and members of military and law enforcement around the world. The ability to accurately and quickly detect explosive materials from a distance would be an extremely valuable tool for mitigating the risk posed by these devices. A variety of techniques exist that are capable of accurately identifying explosive compounds, but an effective standoff technique is still yet to be realized. Most of the methods being investigated to fill this gap in capabilities are laser based. Raman spectroscopy is one such technique that has been demonstrated to be effective at a distance. Spatially Offset Raman Spectroscopy (SORS) is a technique capable of identifying chemical compounds inside of containers, which could be used to detect hidden explosive devices. Coherent Anti-Stokes Raman Spectroscopy (CARS) utilized a coherent pair of lasers to excite a sample, greatly increasing the response of sample while decreasing the strength of the lasers being used, which significantly improves the eye safety issue that typically hinders laser-based detection methods. Time-gating techniques are also being developed to improve the data collection from Raman techniques, which are often hindered fluorescence of the test sample in addition to atmospheric, substrate, and contaminant responses. Ultraviolet based techniques have also shown significant promise by greatly improved signal strength from excitation of resonance in many explosive compounds. Raman spectroscopy, which identifies compounds based on their molecular response, can be coupled with Laser Induced Breakdown Spectroscopy (LIBS) capable of characterizing the sample's atomic composition using a single laser.

  10. A readout unit for high rate applications

    CERN Document Server

    Toledo, J; Domínguez, D; Guirao-Elias, A; Müller, H

    2002-01-01

    The LHCb readout unit (RU) is a custom entry stage to the readout network of a data-acquisition or trigger system. It performs subevent building from multiple link inputs toward a readout network via a PCI network interface or alternatively toward a high-speed link, via an S-link interface. Incoming event fragments are derandomized, buffered and assembled into single subevents. This process is based on a low- overhead framing convention and matching of equal event numbers. Programmable logic is used both in the input and output stages of the RU module, which may be configured either as a data-link multiplexer or as entry stage to a readout or trigger network. All FPGAs are interconnected via the PCI bus, which is hosted by a networked microprocessor card. Its main tasks are remote FPGA configuration and initialization of the PCI cards. The RU hardware architecture has been optimized for a throughput of up to 200 MB/s at a 1 MHz trigger rate, as required by the most demanding application, the LHCb level-1 trig...

  11. The Quiet Explosion

    Science.gov (United States)

    2008-07-01

    weak and 'soft' [1], very different from a gamma-ray burst and more in line with what is expected from a normal supernova." So, after the supernova was discovered, the team rapidly observed it from the Asiago Observatory in Northern Italy and established that it was a Type Ic supernova. "These are supernovae produced by stars that have lost their hydrogen and helium-rich outermost layers before exploding, and are the only type of supernovae which are associated with (long) gamma-ray bursts," explains Mazzali. "The object thus became even more interesting!" Earlier this year, an independent team of astronomers reported in the journal Nature that SN 2008D is a rather normal supernova. The fact that X-rays were detected was, they said, because for the first time, astronomers were lucky enough to catch the star in the act of exploding. Mazzali and his team think otherwise. "Our observations and modeling show this to be a rather unusual event, to be better understood in terms of an object lying at the boundary between normal supernovae and gamma-ray bursts." The team set up an observational campaign to monitor the evolution of the supernova using both ESO and national telescopes, collecting a large quantity of data. The early behaviour of the supernova indicated that it was a highly energetic event, although not quite as powerful as a gamma-ray burst. After a few days, however, the spectra of the supernova began to change. In particular Helium lines appeared, showing that the progenitor star was not stripped as deeply as supernovae associated with gamma-ray bursts. Over the years, Mazzali and his group have developed theoretical models to analyse the properties of supernovae. When applied to SN2008D, their models indicated that the progenitor star was at birth as massive as 30 times the Sun, but had lost so much mass that at the time of the explosion the star had a mass of only 8-10 solar masses. The likely result of the collapse of such a massive star is a black hole

  12. Resource recycling technique of abandoned TNT-RDX-AL mixed explosive

    Science.gov (United States)

    Chen, Siyang; Ding, Yukui

    2017-08-01

    TNT-RDX-AL mixed explosive is a kind of high energy mixed explosive. It has the detonation characteristics even when reaching the scrapping standard. Inappropriate disposal often causes serious accident. Employing the resource recycling technique, the abandoned TNT-RDX-AL mixed explosive can be recycled. This paper summarized the progress of recycling of abandoned mixed explosive. What's more, three kinds of technological process of resource recycling abandoned TNT-RDX-AL mixed explosives are introduced. The author analysis of the current recovery processes and provided a reference for the recycling of the other same type explosive.

  13. Effect of particle size and particle size distribution on physical characteristics, morphology and crystal structure of explosively compacted high-T(sub c) superconductors

    Science.gov (United States)

    Kotsis, I.; Enisz, M.; Oravetz, D.; Szalay, A.

    1995-01-01

    A superconductor, of composition Y(Ba,K,Na)2Cu3O(x)/F(y) and a composite of composition Y(Ba,K,Na)2Cu3O(x)/F(y) + Ag, with changing K, Na and F content but a constant silver content (Ag = 10 mass%) was prepared using a single heat treatment. the resulting material was ground in a corundum lined mill, separated to particle size fractions of 0-40 micron, 0-63 micron and 63-900 micron and explosively compacted, using an explosive pressure of 10(exp 4) MPa and a subsequent heat treatment. Best results were obtained with the 63-900 micron fraction of composition Y(Ba(1.95) K(0.01)Cu3O(x)F(0),(05)/Ag: porosity less than 0.01 cu cm/g and current density 2800 A/sq cm at 77K.

  14. Thermal Environment inside a Tunnel after Thermobaric Explosion

    Directory of Open Access Journals (Sweden)

    Fei Chen

    2017-01-01

    Full Text Available The outstanding thermal damage effect of thermobaric explosive (TBX is enhanced in closed or semiclosed spaces, which may pose a serious threat to the security of people sheltered in tunnels or other protective engineering. In order to investigate the thermal environment inside a tunnel after thermobaric explosion, we developed a damage evaluation method for the thermal radiation of explosion fireballs in tunnels; secondly, the air temperature distribution inside a tunnel shortly after explosion was theoretically analyzed; finally, the dynamic thermal environment after the explosion and the influences of TBXs mass and initial ground temperature on it in cases of open and blocked tunnels were numerically simulated with the FLUENT software. The results show that the fireball thermal radiation damage occurs mainly in the vicinity of the explosion source. The air temperature inside a tunnel shortly after the explosion decreases continuously with increasing distance from the explosion source and finally reaches the initial air temperature. The decay rate of air temperature inside a tunnel is slower in the blocked case, which increases the probability of causing a secondary fire disaster. The increase of explosive mass and the initial ground temperature favor the high-temperature performance of TBX, especially for the blocked tunnel.

  15. New directions in the science and technology of advanced sheet explosive formulations and the key energetic materials used in the processing of sheet explosives: Emerging trends.

    Science.gov (United States)

    Talawar, M B; Jangid, S K; Nath, T; Sinha, R K; Asthana, S N

    2015-12-30

    This review presents the work carried out by the international community in the area of sheet explosive formulations and its applications in various systems. The sheet explosive is also named as PBXs and is a composite material in which solid explosive particles like RDX, HMX or PETN are dispersed in a polymeric matrix, forms a flexible material that can be rolled/cut into sheet form which can be applied to any complex contour. The designed sheet explosive must possess characteristic properties such as flexible, cuttable, water proof, easily initiable, and safe handling. The sheet explosives are being used for protecting tanks (ERA), light combat vehicle and futuristic infantry carrier vehicle from different attacking war heads etc. Besides, sheet explosives find wide applications in demolition of bridges, ships, cutting and metal cladding. This review also covers the aspects such as risks and hazard analysis during the processing of sheet explosive formulations, effect of ageing on sheet explosives, detection and analysis of sheet explosive ingredients and the R&D efforts of Indian researchers in the development of sheet explosive formulations. To the best of our knowledge, there has been no review article published in the literature in the area of sheet explosives. Copyright © 2015 Elsevier B.V. All rights reserved.

  16. High-speed imaging and small-scale explosive characterization techniques to understand effects of primary blast-induced injury on nerve cell structure and function

    Science.gov (United States)

    Piehler, T.; Banton, R.; Zander, N.; Duckworth, J.; Benjamin, R.; Sparks, R.

    2017-08-01

    Traumatic brain injury (TBI) is often associated with blast exposure. Even in the absence of penetrating injury or evidence of tissue injury on imaging, blast TBI may trigger a series of neural/glial cellular and functional changes. Unfortunately, the diagnosis and proper treatment of mild traumatic brain injury (mTBI) caused by explosive blast is challenging, as it is not easy to clinically distinguish blast from non-blast TBI on the basis of patient symptoms. Damage to brain tissue, cell, and subcellular structures continues to occur slowly and in a manner undetectable by conventional imaging techniques. The threshold shock impulse levels required to induce damage and the cumulative effects upon multiple exposures are not well characterized. Understanding how functional and structural damage from realistic blast impact at cellular and tissue levels at variable timescales after mTBI events may be vital for understanding this injury phenomenon and for linking mechanically induced structural changes with measurable effects on the nervous system. Our working hypothesis is that there is some transient physiological dysfunction occurring at cellular and subcellular levels within the central nervous system due to primary blast exposure. We have developed a novel in vitro indoor experimental system that uses real military explosive charges to more accurately represent military blast exposure and to probe the effects of primary explosive blast on dissociated neurons. We believe this system offers a controlled experimental method to analyze and characterize primary explosive blast-induced cellular injury and to understand threshold injury phenomenon. This paper will also focus on the modeling aspect of our work and how it relates to the experimental work.

  17. Preciscavanje otpadnih voda u postupcima prerade i flegmatizacije eksploziva / Refining of waste waters in processes of manufacturing and coating of high explosives

    Directory of Open Access Journals (Sweden)

    Mirjana Anđelković-Lukić

    2002-03-01

    Full Text Available U radu su prikazani tehnološki postupci prerade (flegmatizacije eksploziva pri kojima dolazi do zagađenja okoline otpadnim vodama. Prikazani su neki od načina prerade otpadnih voda pre nego što se ispuste u javne vodotokove. / The paper deals with production processes of manufacturing and coating Ugh explosives which pollute environment with waste waters. Some methods of refining waste waters before letting them into open water current are presented.

  18. ACUTE EFFECTS OF TWO DIFFERENT WARM-UP PROTOCOLS ON FLEXIBILITY AND LOWER LIMB EXPLOSIVE PERFORMANCE IN MALE AND FEMALE HIGH LEVEL ATHLETES

    Directory of Open Access Journals (Sweden)

    Charilaos Tsolakis

    2012-12-01

    Full Text Available This study examined the effects of two different warm-up protocols on lower limb power and flexibility in high level athletes. Twenty international level fencers (10 males and 10 females performed two warm-up protocols that included 5-min light jogging and either short (15s or long (45s static stretching exercises for each of the main leg muscle groups (quadriceps, hamstrings and triceps surae, followed by either 3 sets of 3 (short stretching treatment, or 3 sets of 5 tuck jumps (long stretching treatment, in a randomized crossover design with one week between treatments. Hip joint flexion was measured with a Lafayette goniometer before and after the 5-min warm-up, after stretching and 8 min after the tuck jumps, while counter movement jump (CMJ performance was evaluated by an Ergojump contact platform, before and after the stretching treatment, as well as immediately after and 8 minutes after the tuck jumps. Three way ANOVA (condition, time, gender revealed significant time (p < 0.001 and gender (p < 0.001 main effects for hip joint flexion, with no interaction between factors. Flexibility increased by 6. 8 ± 1.1% (p < 0.01 after warm-up and by another 5.8 ± 1.6% (p < 0.01 after stretching, while it remained increased 8 min after the tuck jumps. Women had greater ROM compared with men at all time points (125 ± 8° vs. 94 ± 4° p<0.01 at baseline, but the pattern of change in hip flexibility was not different between genders. CMJ performance was greater in men compared with women at all time points (38.2 ± 1.9 cm vs. 29.8 ± 1.2 cm p < 0.01 at baseline, but the percentage of change CMJ performance was not different between genders. CMJ performance remained unchanged throughout the short stretching protocol, while it decreased by 5.5 ± 0.9% (p < 0.01 after stretching in the long stretching protocol However, 8 min after the tuck jumps, CMJ performance was not different from the baseline value (p = 0.075. In conclusion, lower limb power may

  19. Laser-Induced Explosion of Nitrated Carbon Nanotubes: Nonadiabatic and Reactive Molecular Dynamics Simulations.

    Science.gov (United States)

    Chaban, Vitaly V; Pal, Sougata; Prezhdo, Oleg V

    2016-12-14

    Laser-initiated decomposition of carbon nanotubes (CNTs) can lead to medical, military, and other applications. In medicine, CNTs give rise to efficient remedies against diseases and malignant cells, since they encapsulate drug molecules, can be delivered inside living organisms, and absorb light that penetrates through biological tissues. As explosives, pyrotechnics, and propellants, CNTs can be activated remotely by a visible or infrared laser, avoiding the need for a detonating cord. The reported non-equilibrium investigation demonstrates the possibility of photoinduced polynitro-CNT explosion and provides a detailed chemical mechanism of the decomposition process, explicitly in the time domain. Nonadiabatic molecular dynamics (MD) performed with real-time time-dependent tight-binding density functional theory demonstrates that the photogenerated exciton deposits its energy into a broad range of phonon modes within less than a picosecond, resulting in a rapid polynitro-CNT heating. Following the heating, reactive MD demonstrates an explosion, during which the local temperature of polynitro-CNTs and its fragments rises as high as 4000 K. Photoexcitation of nitro groups by a high-energy laser is not required; the energy can be delivered to polynitro-CNTs using near-infrared light within the biological window. Furthermore, the explosion is possible both with and without an external oxygen source. Anaerobic explosion could be particularly beneficial in confined biological and nanoscale environments. The products of the polynitro-CNT decomposition are nontoxic: carbon dioxide and molecular nitrogen. The in silico demonstration of the laser-induced polynitro-CNT explosion, its chemical mechanism, and the time scales of physical and chemical transformations can be tested experimentally using time-resolved laser techniques.

  20. Experimental and Numerical Research on Cylindrical Tubes under Outer Cylindrical Explosive Waves

    Directory of Open Access Journals (Sweden)

    Sui Yaguang

    2017-01-01

    Full Text Available Cylindrical explosive loading has an important application in explosive working, researching on weapon damage, and explosive-driving load. This study uses experimental and numerical methods to study the response of long and thin tubes when subjected to cylindrical explosive loading. The flake-like charge and multipoint initiation technique were adopted to load cylindrical explosive waves. Experimental results showed that the method could produce uniform deformation in certain parts of the long tube, but partial spall injuries occurred after the explosion. The macroscopic and microscopic deformation of tubes were analyzed. Numerical simulations were conducted to investigate the detailed response of the tube subjected to a cylindrical explosive wave. The results indicate that the collision of explosive waves brought inconsistencies in pressure and velocity. The pressure and velocity in the collision region were significantly higher than those of other parts, which caused the collision region to be easily damaged.

  1. Jet noise recorded during discrete explosive eruptions

    Science.gov (United States)

    Scarlato, P.; Sesterhenn, J.; Taddeucci, J.

    2013-12-01

    Most commonly, acoustic studies of explosive volcanic activity focus on the infrasonic range, as related to large volumetric changes mostly associated with the liberation of pressurized gas. However, there are multiple potential sources of sound that accompany explosive activity, expected to cover a broad range of frequencies. Among the audible range are several mechanisms, generating sound in high-velocity jets of gas or gas-particle mixture entering the atmosphere. This types of sound, well-documented and investigated in physics and engineering literature, has been so far mostly neglected in the study of explosive eruptions, due to the high energy content of the jet noise in the infrasonic regime, despite the potential it holds for parameterizing and understanding eruption processes. High-speed imaging of Strombolian and Vulcanian explosive eruptions at several volcanoes allowed the visualization of acoustic waves generated during the emission of the eruptive gas-pyroclast mixture. The waves, visible only when travelling within dilute gas/aerosol plumes, are thought to cause a temporary phase change in the travel medium. Image analysis allows direct measurement of the apparent (projected) trajectory, wavelength and travel velocity of the waves. Synchronized audio recording from the same eruptions include frequency contents in agreement with the observed waves. The general features of the observed waves are compatible with jet noise originated by the gas-pyroclast mixture entering the atmosphere, opening the way for future comparison with the results of numerical simulations of explosive eruptions, and possibly setting the basis for new acoustic monitoring tools for explosive eruptions.

  2. Survey of Processing Methods for High Strength High Conductivity Wires for High Field Magnet Applications

    Energy Technology Data Exchange (ETDEWEB)

    Han, K.; Embury, J.D.

    1998-10-01

    This paper will deal with the basic concepts of attaining combination of high strength and high conductivity in pure materials, in-situ composites and macrocomposites. It will survey current attainments, and outline where some future developments may lie in developing wire products that are close to the theoretical strength of future magnet applications.

  3. Material Selection and Characterization for High Gradient RF Applications

    CERN Document Server

    Arnau-Izquierdo, G; Heikkinen, S; Ramsvik, T; Sgobba, Stefano; Taborelli, M; Wuensch, W

    2007-01-01

    The selection of candidate materials for the accelerating cavities of the Compact Linear Collider (CLIC) is carried out in parallel with high power RF testing. The maximum DC breakdown field of copper, copper alloys, refractory metals, aluminium and titanium have been measured with a dedicated setup. Higher maximum fields are obtained for refractory metals and for titanium, which exhibits, however, important damages after conditioning. Fatigue behaviour of copper alloys has been studied for surface and bulk by pulsed laser irradiation and ultrasonic excitation, respectively. The selected copper alloys show consistently higher fatigue resistance than copper in both experiments. In order to obtain the best local properties in the device a possible solution is a bi-metallic assembly. Junctions of molybdenum and copper-zirconium UNS C15000 alloy, achieved by HIP (Hot Isostatic Pressing) diffusion bonding or explosion bonding were evaluated for their mechanical strength. The reliability of the results obtained wit...

  4. Magnetorotational Explosions of Core-Collapse Supernovae

    Directory of Open Access Journals (Sweden)

    Gennady S. Bisnovatyi-Kogan

    2014-12-01

    Full Text Available Core-collapse supernovae are accompanied by formation of neutron stars. The gravitation energy is transformed into the energy of the explosion, observed as SN II, SN Ib,c type supernovae. We present results of 2-D MHD simulations, where the source of energy is rotation, and magnetic eld serves as a "transition belt" for the transformation of the rotation energy into the energy of the explosion. The toroidal part of the magnetic energy initially grows linearly with time due to dierential rotation. When the twisted toroidal component strongly exceeds the poloidal eld, magneto-rotational instability develops, leading to a drastic acceleration in the growth of magnetic energy. Finally, a fast MHD shock is formed, producing a supernova explosion. Mildly collimated jet is produced for dipole-like type of the initial field. At very high initial magnetic field no MRI development was found.

  5. Communication: Determining the structure of the N₂Ar van der Waals complex with laser-based channel-selected Coulomb explosion.

    Science.gov (United States)

    Wu, Chengyin; Wu, Cong; Song, Di; Su, Hongmei; Xie, Xiguo; Li, Min; Deng, Yongkai; Liu, Yunquan; Gong, Qihuang

    2014-04-14

    We experimentally reconstructed the structure of the N2Ar van der Waals complex with the technique of laser-based channel-selected Coulomb explosion imaging. The internuclear distance between the N2 center of mass and the Ar atom, i.e., the length of the van der Waals bond, was determined to be 3.88 Å from the two-body explosion channels. The angle between the van der Waals bond and the N2 principal axis was determined to be 90° from the three-body explosion channels. The reconstructed structure was contrasted with our high level ab initio calculations. The agreement demonstrated the potential application of laser-based Coulomb explosion in imaging transient molecular structure, particularly for floppy van der Waals complexes, whose structures remain difficult to be determined by conventional spectroscopic methods.

  6. Explosive electron emission from flat Ge crystals

    Energy Technology Data Exchange (ETDEWEB)

    Porshyn, Vitali; Mingels, Stephan; Luetzenkirchen-Hecht, Dirk; Mueller, Guenter [University of Wuppertal (Germany)

    2016-07-01

    During the search for photo-induced field emission from flat semiconductors, which might provide high brightness electron beams, we have found with our new ultra-high vacuum measurement system explosive electron emission (EEE) from n-doped Ge crystals resulting in high current pulses of ∝100 A and ∝4 ns duration. This effect reproducibly appears in a narrow photon energy range of 3.2-3.6 eV with a quantum efficiency of up to 20%. Moreover, the EEE current does not depend on the surface field but on the extraction voltage (500-3000 V). EEE is a well known plasma-induced effect for locally heated metals resulting in a crater-like destruction of the surface. For Ge, however, it appears at a factor of 20 lower power density (0.3 MW/cm{sup 2}) of the pulsed laser, and each current pulse forms a new crater of ∝10 μm size. The measured EEE spectra show a similar FWHM (< 1 eV) as photo emitted electrons. Potential applications, e.g. in microwave tubes or gyrotrons, will be discussed.

  7. Services Textbook of Explosives

    Science.gov (United States)

    1972-03-01

    and shock effects is obtained by the use of ’primary’ (also known as ’initiatory’) explosives, among the most important of which are mercury fulminate ...Brown had discovered that compressed dry guncotton could be detonated by a mercury fulminate detonator, and a little later they found that compressed wet...of his powder (a mixture of mercury fulminate and potassium chlorate) enclosed in thin copper caps. This idea did not at once meet with the approval

  8. Magnesium Diecasting Alloys for High Temperature Applications

    Science.gov (United States)

    Pekguleryuz, Mihriban O.; Kaya, A. Arslan

    New growth area for automotive use of magnesium is powertrain applications such as the transmission case and engine block. These applications see service conditions in the temperature range of 150-200C under 50-70 MPa of tensile and compressive loads. In addition, metallurgical stability, fatigue resistance, corrosion resistance and castability requirements need to be met. A decade of research and development has resulted in a number of creep- resistant magnesium alloys that are potential candidates for elevated-temperature automotive applications. These alloys are mostly based on rare-earth and alkaline earth element additions to magnesium. This paper gives an overview of the various magnesium alloy systems for use in elevated-temperature applications.

  9. High speed serdes devices and applications

    CERN Document Server

    Stauffer, David R; Sorna, Michael A; Dramstad, Kent; Ogilvie, Clarence Rosser; Amanullah, Mohammad; Rockrohr, James Donald

    2008-01-01

    Offers an understanding of the features and functions typically found on HSS devices. This book explains how these HSS devices are used in protocol applications and the analysis which must be performed to use such HSS devices.

  10. High Efficiency Centrifugal Compressor for Rotorcraft Applications

    Science.gov (United States)

    Medic, Gorazd; Sharma, Om P.; Jongwook, Joo; Hardin, Larry W.; McCormick, Duane C.; Cousins, William T.; Lurie, Elizabeth A.; Shabbir, Aamir; Holley, Brian M.; Van Slooten, Paul R.

    2014-01-01

    The report "High Efficiency Centrifugal Compressor for Rotorcraft Applications" documents the work conducted at UTRC under the NRA Contract NNC08CB03C, with cost share 2/3 NASA, and 1/3 UTRC, that has been extended to 4.5 years. The purpose of this effort was to identify key technical barriers to advancing the state-of-the-art of small centrifugal compressor stages; to delineate the measurements required to provide insight into the flow physics of the technical barriers; to design, fabricate, install, and test a state-of-the-art research compressor that is representative of the rear stage of an axial-centrifugal aero-engine; and to acquire detailed aerodynamic performance and research quality data to clarify flow physics and to establish detailed data sets for future application. The design activity centered on meeting the goal set outlined in the NASA solicitation-the design target was to increase efficiency at higher work factor, while also reducing the maximum diameter of the stage. To fit within the existing Small Engine Components Test Facility at NASA Glenn Research Center (GRC) and to facilitate component re-use, certain key design parameters were fixed by UTRC, including impeller tip diameter, impeller rotational speed, and impeller inlet hub and shroud radii. This report describes the design effort of the High Efficiency Centrifugal Compressor stage (HECC) and delineation of measurements, fabrication of the compressor, and the initial tests that were performed. A new High-Efficiency Centrifugal Compressor stage with a very challenging reduction in radius ratio was successfully designed, fabricated and installed at GRC. The testing was successful, with no mechanical problems and the running clearances were achieved without impeller rubs. Overall, measured pressure ratio of 4.68, work factor of 0.81, and at design exit corrected flow rate of 3 lbm/s met the target requirements. Polytropic efficiency of 85.5 percent and stall margin of 7.5 percent were

  11. Explosive Emission and Gap Closure from a Relativistic Electron Beam Diode

    Science.gov (United States)

    2013-06-01

    perforated anode for high power microwave (HPM) production or flash X-ray radiography . In accelerator applications, the electrons from cold cathodes are...Bremsstrahlung radiation [3-8]. It is imperative to study the beam physics even in the accelerators used for radiography in order to optimize the...then slowing to 10 cm/ µs. Explosive emission cold cathodes are also employed in virtual cathode oscillators for HPM production [11]. The RITS-6

  12. Characterization of explosives processing waste decomposition due to composting. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Griest, W.H.; Stewart, A.J.; Ho, C.H.; Tyndall, R.L.; Vass, A.A.; Caton, J.E.; Caldwell, W.M.

    1994-09-01

    The objective of this work was to provide data and methodology assisting the transfer and acceptance of composting technology for the remediation of explosives-contaminated soils and sediments. Issues and activities addressed included: (a) chemical and toxicological characterization of compost samples from new field composting experiments, and the environmental availability of composting efficiency by isolation of bacterial consortia and natural surfactants from highly efficient composts, and (c) improved assessment of compost product suitability for land application.

  13. Effect of Velocity of Detonation of Explosives on Seismic Radiation

    Science.gov (United States)

    Stroujkova, A. F.; Leidig, M.; Bonner, J. L.

    2014-12-01

    We studied seismic body wave generation from four fully contained explosions of approximately the same yields (68 kg of TNT equivalent) conducted in anisotropic granite in Barre, VT. The explosions were detonated using three types of explosives with different velocities of detonation (VOD): Black Powder (BP), Ammonium Nitrate Fuel Oil/Emulsion (ANFO), and Composition B (COMP B). The main objective of the experiment was to study differences in seismic wave generation among different types of explosives, and to determine the mechanism responsible for these differences. The explosives with slow burn rate (BP) produced lower P-wave amplitude and lower corner frequency, which resulted in lower seismic efficiency (0.35%) in comparison with high burn rate explosives (2.2% for ANFO and 3% for COMP B). The seismic efficiency estimates for ANFO and COMP B agree with previous studies for nuclear explosions in granite. The body wave radiation pattern is consistent with an isotropic explosion with an added azimuthal component caused by vertical tensile fractures oriented along pre-existing micro-fracturing in the granite, although the complexities in the P- and S-wave radiation patterns suggest that more than one fracture orientation could be responsible for their generation. High S/P amplitude ratios and low P-wave amplitudes suggest that a significant fraction of the BP source mechanism can be explained by opening of the tensile fractures as a result of the slow energy release.

  14. Liquid explosives. The threat to civil aviation and the European response

    NARCIS (Netherlands)

    Ruiter, C.J. de; Lemmens, O.M.E.J.

    2008-01-01

    This paper deals with the specific group of homemade liquid high explosives in relation to aviation security. The sudden and irrefutable focus on homemade explosives and liquid explosives in particular after the 2006 defeated attacks in London, made the aviation security community realize that the

  15. Do not underestimate danger of explosion; Even dust can destroy equipment and kill

    OpenAIRE

    P. Štroch

    2016-01-01

    Explosions never happen at random, they have their exact laws. And sometimes they need very little – high dust concentration, turbulence and ignition source, often spontaneous combustion. If these conditions are met, explosions always follow. It needs to be mentioned that all organic substances are explosive, for example starch, flour, dried milk, sugar, cocoa, pharmaceuticals, textiles, wood and coal dust and others. The highest risk of explosion primarily threatens factories, where they wor...

  16. Explosion confinement system for exploitations by sublevels; Sistema de Confinamiento de Explosiones para Explotaciones por Subniveles

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1999-11-01

    The objective of this project was to develop a explosion suppression system capable to confine and extinguish gas explosions of the type produced in sub level caving faces when blasting to the coal pillar. Existing systems, such as triggered barriers, were considered not to be valid because of size, weight, cost, and other operational constraints. The research activities have been focused in the development of a mixed water/air spray system that should be manually activated some second before blasting. Two prototypes have been developed and tested, the first one using nozzle operating at the standard ranges of pressure that are normally available in underground coal mines, and a second one based in high-pressure nozzles. In this case, bottles containing a pressurized air/water mixtures are required. The works carried out included theoretical studies, hydraulic nozzles characterization, and modelling of the explosion phenomena using the AutoReaGas code. Besides, extensive testing of the prototypes has been carried out in an underground explosion test facility that has been set up specially for this project at the Barredo Pit in Mieres (Asturias). The results obtained show that the low-pressure system is not valid for this particular application, whereas the high-pressure yielded a more promising performance. However, further testing is required to confirm these results.

  17. Explosive fragmentation of liquids in spherical geometry

    Science.gov (United States)

    Milne, A.; Longbottom, A.; Frost, D. L.; Loiseau, J.; Goroshin, S.; Petel, O.

    2017-05-01

    Rapid acceleration of a spherical shell of liquid following central detonation of a high explosive causes the liquid to form fine jets that are similar in appearance to the particle jets that are formed during explosive dispersal of a packed layer of solid particles. Of particular interest is determining the dependence of the scale of the jet-like structures on the physical parameters of the system, including the fluid properties (e.g., density, viscosity, and surface tension) and the ratio of the mass of the liquid to that of the explosive. The present paper presents computational results from a multi-material hydrocode describing the dynamics of the explosive dispersal process. The computations are used to track the overall features of the early stages of dispersal of the liquid layer, including the wave dynamics, and motion of the spall and accretion layers. The results are compared with new experimental results of spherical charges surrounded by a variety of different fluids, including water, glycerol, ethanol, and vegetable oil, which together encompass a significant range of fluid properties. The results show that the number of jet structures is not sensitive to the fluid properties, but primarily dependent on the mass ratio. Above a certain mass ratio of liquid fill-to-explosive burster ( F / B), the number of jets is approximately constant and consistent with an empirical model based on the maximum thickness of the accretion layer. For small values of F / B, the number of liquid jets is reduced, in contrast with explosive powder dispersal, where small F / B yields a larger number of particle jets. A hypothetical explanation of these features based on the nucleation of cavitation is explored numerically.

  18. Differential thermal analysis microsystem for explosive detection

    DEFF Research Database (Denmark)

    Olsen, Jesper Kenneth; Greve, Anders; Senesac, L.

    2011-01-01

    A micro differential thermal analysis (DTA) system is used for detection of trace explosive particles. The DTA system consists of two silicon micro chips with integrated heaters and temperature sensors. One chip is used for reference and one for the measurement sample. The sensor is constructed a...... of the Xsense project at the Technical University of Denmark (DTU) which combines four independent sensing techniques, these micro DNT sensors will be included in handheld explosives detectors with applications in homeland security and landmine clearance.......A micro differential thermal analysis (DTA) system is used for detection of trace explosive particles. The DTA system consists of two silicon micro chips with integrated heaters and temperature sensors. One chip is used for reference and one for the measurement sample. The sensor is constructed...... as a small silicon nitride membrane incorporating heater elements and a temperature measurement resistor. In this manuscript the DTA system is described and tested by measuring calorimetric response of 3 different kinds of explosives (TNT, RDX and PETN). This project is carried out under the framework...

  19. Spraying explosive formulations. [Quarterly report], July--September 1970

    Energy Technology Data Exchange (ETDEWEB)

    Schmitz, G.T.

    1970-12-31

    A composition of 98/2 weight percent PETN/polybutadiene elastomer was formulated, sprayed on bridgewires and electrically initiated, to determine the,feasibility of such deposition of explosives bonded to test surfaces. Test firing resulted in a detonation reaction which could mean that explosive compositions sprayed on test surfaces may be an important tool in testing structural integrity, e.g., as presently in the Vulnerability Testing Program. A semi-automatic apparatus for spraying explosive formulations on chemically etched electric circuits, support membranes and/or test vehicle surfaces has been designed, and improved application processes are being developed.

  20. Piezoresistive Probe Array for High Throughput Applications

    NARCIS (Netherlands)

    Gaitas, A.; French, P.

    2011-01-01

    Microcantilevers are used in a number of applications including atomic-force microscopy (AFM). In this work, piezoresistive deflection-sensing elements are integrated onto micromachined cantilevers to increase sensitivity, and reduce complexity and cost. An array of probes with 5 nm gold ultrathin

  1. Polarisation Spectral Synthesis For Type Ia Supernova Explosion Models

    Science.gov (United States)

    Bulla, Mattia

    2017-02-01

    Despite their relevance across a broad range of astrophysical research topics, Type Ia supernova explosions are still poorly understood and answers to the questions of when, why and how these events are triggered remain unclear. In this respect, polarisation offers a unique opportunity to discriminate between the variety of possible scenarios. The observational evidence that Type Ia supernovae are associated with rather low polarisation signals (smaller than a few per cent) places strong constraints for models and calls for modest asphericities in the progenitor system and/or explosion mechanism.The goal of this thesis is to assess the validity of contemporary Type Ia supernova explosion models by testing whether their predicted polarisation signatures can account for the small signals usually observed. To this end, we have implemented and tested an innovative Monte Carlo scheme in the radiative transfer code artis. Compared to previous Monte Carlo approaches, this technique produces synthetic observables (light curves, flux and polarisation spectra) with a substantial reduction in the Monte Carlo noise and therefore in the required computing time. This improvement is particularly crucial for our study as we aim to extract very weak polarisation signals, comparable to those detected in Type Ia supernovae. We have also demonstrated the applicability of this method to other classes of supernovae via a preliminary study of the first spectropolarimetry observations of superluminous supernovae.Using this scheme, we have calculated synthetic spectropolarimetry for three multi-dimensional explosion models recently proposed as promising candidates to explain Type Ia supernovae. Our findings highlight the power of spectropolarimetry in testing and discriminating between different scenarios. While all the three models predict light curves and flux spectra that are similar to each others and reproduce those observed in Type Ia supernovae comparably well, polarisation does

  2. Analysis of different materials subjected to open-air explosions in search of explosive traces by Raman microscopy.

    Science.gov (United States)

    Zapata, Félix; García-Ruiz, Carmen

    2017-06-01

    Post-explosion scenes offer such chaos and destruction that evidence recovery and detection of post-blast residues from the explosive in the surrounding materials is highly challenging and difficult. The suitability of materials to retain explosives residues and their subsequent analysis has been scarcely investigated. Particularly, the use of explosive mixtures containing inorganic oxidizing salts to make improvised explosive devices (IEDs) is a current security concern due to their wide availability and lax control. In this work, a wide variety of materials such as glass, steel, plywood, plastic bag, brick, cardboard or cotton subjected to open-air explosions were examined using confocal Raman microscopy, aiming to detect the inorganic oxidizing salts contained in explosives as black powder, chloratite, dynamite, ammonium nitrate fuel oil and ammonal. Post-blast residues were detected through microscopic examination of materials surfaces. In general, the more homogeneous and smoother the surface was, the less difficulties and better results in terms of identification were obtained. However, those highly irregular surfaces were the most unsuitable collectors for the posterior identification of explosive traces by Raman microscopy. The findings, difficulties and some recommendations related to the identification of post-blast particles in the different materials studied are thoroughly discussed. Copyright © 2017 Elsevier B.V. All rights reserved.

  3. NUMERICAL MODEL FOR THE KRAKATOA HYDROVOLCANIC EXPLOSION AND TSUNAMI

    Directory of Open Access Journals (Sweden)

    Charles L. Mader

    2006-01-01

    Full Text Available Krakatoa exploded August 27, 1883 obliterating 5 square miles of land and leaving a crater 3.5 miles across and 200-300 meters deep. Thirty three feet high tsunami waves hit Anjer and Merak demolishing the towns and killing over 10,000 people. In Merak the wave rose to 135 feet above sea level and moved 100 ton coral blocks up on the shore.Tsunami waves swept over 300 coastal towns and villages killing 40,000 people. The sea withdrew at Bombay, India and killed one person in Sri Lanka.The tsunami was produced by a hydrovolcanic explosion and the associated shock wave and pyroclastic flows.A hydrovolcanic explosion is generated by the interaction of hot magma with ground water. It is called Surtseyan after the 1963 explosive eruption off Iceland. The water flashes to steam and expands explosively. Liquid water becoming water gas at constant volume generates a pressure of 30,000 atmospheres.The Krakatoa hydrovolcanic explosion was modeled using the full Navier-Stokes AMREulerian compressible hydrodynamic code called SAGE which includes the high pressure physics of explosions.The water in the hydrovolcanic explosion was described as liquid water heated by the magma to 1100 degree Kelvin or 19 kcal/mole. The high temperature water is an explosive with the hot liquid water going to a water gas. The BKW steady state detonation state has a peak pressure of 89 kilobars, a propagation velocity of 5900 meters/second and the water is compressed to 1.33 grams/cc.The observed Krakatoa tsunami had a period of less than 5 minutes and wavelength of less than 7 kilometers and thus rapidly decayed. The far field tsunami wave was negligible. The air shock generated by the hydrovolcanic explosion propagated around the world and coupled to the ocean resulting in the explosion being recorded on tide gauges around the world.

  4. Effect of particle size and particle size distribution on physical characteristics, morphology and crystal strucutre of explosively compacted high-Tc superconductors

    Energy Technology Data Exchange (ETDEWEB)

    Kotsis, I.; Enisz, M.; Oravetz, D. [Univ. of Veszprem (Hungary)] [and others

    1994-12-31

    A superconductor, of composition Y(Ba,K,Na){sub 2}Cu{sub 3}O{sub x}/F{sub y} and a composite, of composition Y(Ba,K,Na){sub 2}Cu{sub 3}O{sub x}/F{sub y}+Ag, with changing K, Na and F content, but a constant silver content (Ag=10 mass per cent) was prepared using a single heat treatment. The resulting material was ground in a corundum lined mill, separated to particle size fractions of 0-40 {mu}m, 0-63 {mu}m and 63-900 {mu}m and explosively compacted, using an explosive pressure of 10{sup 4} MPa and a subsequent heat treatment. Best results were obtained with the 63-900 {mu}m fraction of composition Y(Ba{sub 1,95}K{sub 0,01})Cu{sub 3}O{sub x}F{sub 0,05}/Ag: porosity <0.01 cm{sup 3}/g and current density 2800 A/cm{sup 2} at 77 K.

  5. Local Explosion Monitoring using Rg

    Science.gov (United States)

    O'Rourke, C. T.; Baker, G. E.

    2016-12-01

    Rg is the high-frequency fundamental-mode Rayleigh wave, which is only excited by near-surface events. As such, an Rg detection indicates that a seismic source is shallow, generally less than a few km depending on the velocity structure, and so likely man-made. Conversely, the absence of Rg can indicate that the source is deeper and so likely naturally occurring. We have developed a new automated method of detecting Rg arrivals from various explosion sources at local distances, and a process for estimating the likelihood that a source is not shallow when no Rg is detected. Our Rg detection method scans the spectrogram of a seismic signal for a characteristic frequency peak. We test this on the Bighorn Arch Seismic Experiment data, which includes earthquakes, active source explosions in boreholes, and mining explosions recorded on a dense network that spans the Bighorn Mountains and Powder River Basin. The Rg passbands used were 0.4-0.8 Hz for mining blasts and 0.8-1.2 Hz for borehole shots. We successfully detect Rg across the full network for most mining blasts. The lower-yield shots are detectable out to 50 km. We achieve methods that use cross-correlation to detect retrograde motion of the surface waves. Our method shows more complete detection across the network, especially in the Powder River Basin where Rg exhibits prograde motion that does not trigger the existing detector. We also estimate the likelihood that Rg would have been detected from a surface source, based on the measured P amplitude. For example, an event with a large P wave and no detectable Rg would have a high probability of being a deeper event, whereas we cannot confidently determine whether an event with a small P wave and no Rg detection is shallow or not. These results allow us to detect Rg arrivals, which indicate a shallow source, and to use the absence of Rg to estimate the likelihood that a source in a calibrated region is not shallow enough to be man-made.

  6. Mechanical Properties of Composites Used in High-Voltage Applications

    Directory of Open Access Journals (Sweden)

    Andreas Moser

    2016-07-01

    Full Text Available Materials used in high voltage applications have to meet a lot of regulations for their safety and functional usage during their lifetime. For high voltage applications the electrical properties are the most relevant designing criteria. However, the mechanical properties of such materials have rarely been considered for application dimensioning over the last decades. This article gives an overview of composite materials used in high voltage applications and some basic mechanical and thermo-mechanical characterization methods of such materials, including a discussion of influences on practically used epoxy based thermosets.

  7. CMOS Image Sensors for High Speed Applications

    OpenAIRE

    Jamal Deen, M.; Qiyin Fang; Louis Liu; Frances Tse; David Armstrong; Munir El-Desouki

    2009-01-01

    Recent advances in deep submicron CMOS technologies and improved pixel designs have enabled CMOS-based imagers to surpass charge-coupled devices (CCD) imaging technology for mainstream applications. The parallel outputs that CMOS imagers can offer, in addition to complete camera-on-a-chip solutions due to being fabricated in standard CMOS technologies, result in compelling advantages in speed and system throughput. Since there is a practical limit on the minimum pixel size (4~5 μm) due to ...

  8. High temperature heat exchange: nuclear process heat applications

    Energy Technology Data Exchange (ETDEWEB)

    Vrable, D.L.

    1980-09-01

    The unique element of the HTGR system is the high-temperature operation and the need for heat exchanger equipment to transfer nuclear heat from the reactor to the process application. This paper discusses the potential applications of the HTGR in both synthetic fuel production and nuclear steel making and presents the design considerations for the high-temperature heat exchanger equipment.

  9. 46 CFR 56.60-5 - Steel (High temperature applications).

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 2 2010-10-01 2010-10-01 false Steel (High temperature applications). 56.60-5 Section... SYSTEMS AND APPURTENANCES Materials § 56.60-5 Steel (High temperature applications). (a) (Reproduces 124.2.A.) Upon prolonged exposure to temperatures above 775 °F (412 °C), the carbide phase of plain carbon...

  10. The Soviet Program for Peaceful Uses of Nuclear Explosions

    Energy Technology Data Exchange (ETDEWEB)

    Nordyke, M.D.

    2000-07-26

    During a period of some 23 years between 1965 and 1988, the Soviet Union's ''Program for the Utilization of Nuclear Explosions in the National Economy'' carried out 122 nuclear explosions to study and put into industrial use some 13 applications. In all, 128 explosives with yields ranging from 0.01 to 140 kt were used, with the vast majority being between 2 and 20 kt. Most peaceful applications of nuclear explosions in the Soviet PNE Program were explored in depth with a number of tests, but unfortunately little has been reported on the technical results other than general outcomes. Two applications, deep seismic sounding of the Earth's crust and upper mantle and the creation of underground cavities in salt for the storage of gas condensate, found widespread use, representing over 50% of all the explosions. Explosions to explore the technical possibilities of stimulating the production of oil and gas reservoirs accounted for an additional 17%.

  11. Modeling cookoff of HMX based PBX explosives

    Energy Technology Data Exchange (ETDEWEB)

    Hobbs, Michael L.

    2017-03-01

    We have previously developed a PBX 9501 cookoff model for the plastic bonded explosive PBX 9501 consisting of 95 wt% octahydro-1,3,5,7-tetranitro-1,3,5,7-tetrazoncine (HMX), 2.5 wt% Estane® 5703 (a polyurethane thermoplastic), and 2.5 wt% of a nitroplasticizer (NP): BDNPA/F, a 50/50 wt% eutectic mixture bis(2,2-dinitropropyl)-acetal (BDNPA) and bis(2,2-dinitropropyl)-formal (BDNPF). This fivestep model includes desorption of water, decomposition of the NP to form NO2, reaction of the NO2 with Estane and HMX, and decomposition of HMX [1]. This model has been successfully validated with data from six laboratories with scales ranging from 2 g to more than 2.5 kg of explosive. We have determined, that the PBX 9501 model can be used to predict cookoff of other plastic bonded explosives containing HMX and an inert binder, such as LX-04 consisting of 85 wt% HMX and 15 wt% Viton A (vinylidine fluoride/hexafluoropropylene copolymer), LX-07 (90 wt% HMX and 10 wt% Viton A), LX- 10-0 (95 wt% HMX and 5 wt% Viton A), and LX-14 consisting of 95.5 wt % HMX and 4.5 wt% Estane® 5702-F1 (a polyurethane thermoplastic). Normally our cookoff models are verified using Sandia’s Instrumented Thermal Initiation (SITI) experiment. However, SITI data for LX-04, LX-07, LX-10-0, and LX-14 are not available at pressed density; although, some molding powder SITI data on LX-10-0 and LX-14 exists. Tarver and Tran [2] provide some one-dimensional time-to-explosion (ODTX) data for these explosives. The applicability of the PBX 9501 model to LX-04, LX-07, LX-10-0, AND LX-14 was made using this ODTX data [2]. The PBX 9501 model is applied to these other explosives by accounting for the correct amount of HMX in the explosive and limiting the NP reaction. We have found the PBX 9501 model to be useful for predicting the response of these PBXs to abnormal thermal environments such as fire.

  12. Ceramic high temperature superconductors for high current applications

    Energy Technology Data Exchange (ETDEWEB)

    Christiansen, J.

    1996-12-31

    Composite Reaction Texturing (CRT) is a technique which uses a fine distribution of pre-aligned seeds as nucleating sites for texturing oxide superconductors. It has successfully been applied to the texturing of Bi-2212 compounds. A furhter application of CRT is reported in which Y-123 is biaxially textured using seeds of other Rare Earth-123 compounds with higher melting points as nucleating sites. The resultant textured microstructure exhibits mainly low angle grain boundaries (up to 5 deg. misorientation). Results will be presented on the seed alignment techniques, the development of microstructure during reaction of the composite preform and preliminary measurements of electromagnetic properties. (au). 111 refs.

  13. Novel methods for detecting buried explosive devices

    Energy Technology Data Exchange (ETDEWEB)

    Kercel, S.W.; Burlage, R.S.; Patek, D.R.; Smith, C.M. [Oak Ridge National Lab., TN (United States); Hibbs, A.D.; Rayner, T.J. [Quantum Magnetics, Inc., San Diego, CA (United States)

    1997-04-01

    Oak Ridge National Laboratory (ORNL) and Quantum Magnetics, Inc. (QM) are exploring novel landmine detection technologies. Technologies considered here include bioreporter bacteria, swept acoustic resonance, nuclear quadrupole resonance (NQR), and semiotic data fusion. Bioreporter bacteria look promising for third-world humanitarian applications; they are inexpensive, and deployment does not require high-tech methods. Swept acoustic resonance may be a useful adjunct to magnetometers in humanitarian demining. For military demining, NQR is a promising method for detecting explosive substances; of 50,000 substances that have been tested, none has an NQR signature that can be mistaken for RDX or TNT. For both military and commercial demining, sensor fusion entails two daunting tasks, identifying fusible features in both present-day and emerging technologies, and devising a fusion algorithm that runs in real-time on cheap hardware. Preliminary research in these areas is encouraging. A bioreporter bacterium for TNT detection is under development. Investigation has just started in swept acoustic resonance as an approach to a cheap mine detector for humanitarian use. Real-time wavelet processing appears to be a key to extending NQR bomb detection into mine detection, including TNT-based mines. Recent discoveries in semiotics may be the breakthrough that will lead to a robust fused detection scheme.

  14. Novel methods for detecting buried explosive devices

    Science.gov (United States)

    Kercel, Stephen W.; Burlage, Robert S.; Patek, David R.; Smith, Cyrus M.; Hibbs, Andrew D.; Rayner, Timothy J.

    1997-07-01

    Oak Ridge National Laboratory and Quantum Magnetics, Inc. are exploring novel landmine detection technologies. Technologies considered here include bioreporter bacteria, swept acoustic resonance, nuclear quadrupole resonance (NQR), and semiotic data fusion. Bioreporter bacteria look promising for third-world humanitarian applications; they are inexpensive, and deployment does not require high-tech methods. Swept acoustic resonance may be a useful adjunct to magnetometers in humanitarian demining. For military demining, NQR is a promising method for detecting explosive substances; of 50,000 substances that have been tested, one has an NQR signature that can be mistaken for RDX or TNT. For both military and commercial demining, sensor fusion entails two daunting tasks, identifying fusible features in both present-day and emerging technologies, and devising a fusion algorithm that runs in real-time on cheap hardware. Preliminary research in these areas is encouraging. A bioreporter bacterium for TNT detection is under development. Investigation has just started in swept acoustic resonance as an approach to a cheap mine detector for humanitarian use. Real-time wavelet processing appears to be a key to extending NQR bomb detection into mine detection, including TNT-based mines. Recent discoveries in semiotics may be the breakthrough that will lead to a robust fused detection scheme.

  15. Construction of hydrogenation stalls for explosions

    Energy Technology Data Exchange (ETDEWEB)

    Raichle, L.

    1943-05-03

    This report contained explanations for different questions that had been asked by the Association of Chemical Manufacturers. The first item discussed was the pressure occurring in hydrogenation stalls in hydrogen explosions. The pressures actually used were much smaller than the maximum design pressure due to burning gases being allowed to escape from the top and front of the stalls since these areas were open and it could not be assumed that the whole stall space was filled with a 32% hydrogen concentration at the beginning of an explosion. The second item discussed was specifications and rules for the building of hydrogenation stalls. These included the calculations for simple wind pressure according to the Building Code with the usual safety factors and the calculations for an inner pressure of 300 kg/m/sup 2/ with the usual safety factors. An explanation of a stall explosion in Poelitz and reinforced stall construction in Poelitz were two other items that were discussed. Appendix I of the report involved maximum pressures and temperature in hydrogen explosions. Diagram I was involved with this. Appendix II discussed the behavior of a hydrogen flame at high emerging velocities and Appendix III discussed stall construction at Poelitz.

  16. Effects of temperature, humidity, sample geometry, and other variables on Bruceton Type 12 impact initiation of HMX-based high explosives

    Science.gov (United States)

    Avilucea, Gabriel; Aragon, Daniel; Peterson, Paul

    2009-06-01

    The drop weight impact test, developed at Bruceton Naval Research Laboratory 60 years ago, is still the most commonly used configuration for evaluating sensitivity of explosives to non-shock ignition. The standard drop weight impact test is performed under ambient conditions for temperature and humidity - variations in which are known to significantly affect the probability of reaction. We have performed a series of impact tests in an attempt to characterize the effect of temperature, humidity, sample geometry (height, mass, L/d, and pressed density), sample confinement, and impact surface properties (strength and coefficient of friction) on the probability of reaction in a drop weight impact test. Differences in the probability of reaction have been determined across a range of drop heights for each configuration. The results clearly show significant shifts in the probability of reaction and in the slope of the reaction probability curve for each of the variables.

  17. Developing Large Scale Explosively Driven Flyer Experiments on Sand

    Science.gov (United States)

    Rehagen, Thomas; Kraus, Richard

    2017-06-01

    Measurements of the dynamic behavior of granular materials are of great importance to a variety of scientific and engineering applications, including planetary science, seismology, and construction and destruction. In addition, high quality data are needed to enhance our understanding of granular physics and improve the computational models used to simulate related physical processes. However, since there is a non-negligible grain size associated with these materials, experiments must be of a relatively large scale in order to capture the continuum response of the material and reduce errors associated with the finite grain size. We will present designs for explosively driven flyer experiments to make high accuracy measurements of the Hugoniot of sand (with a grain size of hundreds of microns). To achieve an accuracy of better than a few percent in density, we are developing a platform to measure the Hugoniot of samples several centimeters in thickness. We will present the target designs as well as coupled designs for the explosively launched flyer system. This work was performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract No. DE-AC52-07NA27344.

  18. High pressure metrology for industrial applications

    Science.gov (United States)

    Sabuga, Wladimir; Rabault, Thierry; Wüthrich, Christian; Pražák, Dominik; Chytil, Miroslav; Brouwer, Ludwig; Ahmed, Ahmed D. S.

    2017-12-01

    To meet the needs of industries using high pressure technologies, in traceable, reliable and accurate pressure measurements, a joint research project of the five national metrology institutes and the university was carried out within the European Metrology Research Programme. In particular, finite element methods were established for stress–strain analysis of elastic and nonlinear elastic–plastic deformation, as well as of contact processes in pressure-measuring piston-cylinder assemblies, and high-pressure components at pressures above 1 GPa. New pressure measuring multipliers were developed and characterised, which allow realisation of the pressure scale up to 1.6 GPa. This characterisation is based on research including measurements of material elastic constants by the resonant ultrasound spectroscopy, hardness of materials of high pressure components, density and viscosity of pressure transmitting liquids at pressures up to 1.4 GPa and dimensional measurements on piston-cylinders. A 1.6 GPa pressure system was created for operation of the 1.6 GPa multipliers and calibration of high pressure transducers. A transfer standard for 1.5 GPa pressure range, based on pressure transducers, was built and tested. Herewith, the project developed the capability of measuring pressures up to 1.6 GPa, from which industrial users can calibrate their pressure measurement devices for accurate measurements up to 1.5 GPa.

  19. High School Profiles: Application of HTML for Recruitment Decision Making

    Science.gov (United States)

    Johnson, Iryna Y.

    2008-01-01

    Because high school graduates are many colleges' primary target population, information on high school students' performance and sociodemographic characteristics becomes important for the recruitment process. This article introduces an HTML application (referred to here as the High School Profile) that arranges high school information and makes…

  20. Explosives detection for aviation security.

    Science.gov (United States)

    Fainberg, A

    1992-03-20

    The threat of terrorism against commercial aviation has received much attention in the past few years. In response, new ways to detect explosives and to combine techniques based on different phenomena into integrated security systems are being developed to improve aviation security. Several leading methods for explosives and weapons detection are presented.

  1. 27 CFR 555.183 - Importation of plastic explosives on or after April 24, 1997.

    Science.gov (United States)

    2010-04-01

    ... explosives on or after April 24, 1997. 555.183 Section 555.183 Alcohol, Tobacco Products, and Firearms BUREAU..., 1997. Persons filing Form 6 applications for the importation of plastic explosives on or after April 24, 1997, shall attach to the application the following written statement, prepared in triplicate, executed...

  2. Time Evolution of the Density Field of a Micro-Explosion Using Background Oriented Schlieren

    Science.gov (United States)

    Suriyanarayanan, P.; Venkatakrishnan, L.; Jagadeesh, G.

    In recent years micro-explosions have found interesting trans-disciplinary applications in the areas of food preservation,wood science, drug delivery, gene therapy and bio-medical applications [1, 2]. Generating controlled micro-explosions in a laboratory environment in a reliable manner is essential; to study and understand some of the near field flow dynamics associated with blast waves.

  3. Micro-explosion of compound drops

    Science.gov (United States)

    Chen, Chun-Kuei; Lin, Ta-Hui

    2014-08-01

    Introducing water into spray combustion systems, by either water-in-oil emulsification or supplementary water injection, is one of the major techniques for combustion improvement and NOx reduction. Plentiful researches are available on combustion of water-in-oil emulsion fuel drops. The emulsified liquid is a heterogeneous mixture of immiscible liquids. One component forms the continuous phase and the other component forms the discrete phase. The discrete phase consists of globules of the one fluid that are suspended in the continuous phase fluid. Water-in-oil emulsions are commonly considered for combustion applications because emulsions can result in micro-explosion, thereby reducing the average drop diameter to enhance liquid vaporization, and suppressing the formation of soot and NOx. However, the water addition generally does not exceed about 20% for smooth engine operations[!, 21. The combustion characteristics and micro-explosion of emulsion drop were studied by many researchers. The micro-explosion of water in fuel emulsion drops was caused by very fast growth of superheated water vapor bubbles, its superheat limits must be lower than the boiling point temperature of the fuel. These bubbles were primarily governed by the pressure difference between the superheated vapor and the liquid, and by the inertia imparted to the liquid by the motion of the bubble surface[3 6 In this study, we used a coaxial nozzle to generation the multi-component drop. The different type of water-in-oil fuel drops called the compound drops. Unlike an emulsion drop, a compound drop consists of a water core and a fuel shell, which can originate from the phase separation of emulsion[7, 81 or a water drop colliding with a fuel drop[9, 101 Burning and micro-explosion of compound drops have been found to be distinct from those of emulsion drops[9-111 Wang et al.[9 , 101 studied the combustion characteristics of collision merged alkane-water drops. The merged drops appeared in adhesive

  4. Interaction of the Explosive Molecules RDX and TATP with IRMOF-8

    Energy Technology Data Exchange (ETDEWEB)

    Odbadrakh, Khorgolkhuu [ORNL; Lewis, James [West Virginia University; Nicholson, Don M [ORNL

    2010-01-01

    We report our investigations on physisorption and trapping of high explosive (HE) molecules 1,3,5-trinitro-s-triazine or cyclotrimethylene trinitramine (RDX) and triacetone triperoxide (TATP) by an isoreticular metal-organic framework (IRMOF) IRMOF-8. In general, IRMOFs are known for their high porosity and tailorability, thus having potential applications as preconcentrators, and gas storage. In particular, IRMOF-8 has higher hydrogen uptake than the extensively studied IRMOF-1, thus having the potential to act as preconcentrators for explosive molecules. We employed the ab initio density functional theory (DFT) code FIREBALL to estimate physisorption interactions for the RDX and TATP molecules with interior and exterior surfaces of IRMOF-8. At zero temperature, RDX yields several physisorption type binding configurations, while TATP remains more inert to interactions with IRMOF-8. Molecular dynamics simulations at room temperature result in trapping configurations preferring TATP inside the IRMOF-8 cage, which could be attributed to molecular sieving effects.

  5. Digital valve for high pressure high flow applications

    Science.gov (United States)

    Badescu, Mircea; Sherrit, Stewart; Lewis, Derek; Bao, Xiaoqi; Bar-Cohen, Yoseph; Hall, Jeffery L.

    2016-04-01

    To address the challenges, which are involved with the development of flow control valves that can meet high demand requirements such as high pressure, high flow rate, limited power and limited space, the authors have conceived a novel design configuration. This design consists of a digitalized flow control valve with multipath and multistage pressure reduction structures. Specifically, the valve is configured as a set of parallel flow paths from the inlet to the outlet. A choke valve controls the total flow rate by digitally opening different paths or different combination of the paths. Each path is controlled by a poppet cap valve basically operated in on-off states. The number of flow states is 2N where N is the number of flow paths. To avoid erosion from sand in the fluid and high speed flow, the seal area of the poppet cap valve is located at a distance from the flow inlet away from the high speed flow and the speed is controlled to stay below a predefined erosion safe limit. The path is a multistage structure composed of a set of serial nozzles-expansion chambers that equally distribute the total pressure drop to each stage. The pressure drop of each stage and, therefore, the flow speed at the nozzles and expansion chambers is controlled by the number of stages. The paths have relatively small cross section and could be relatively long for large number of stages and still fit in a strict annular space limit. The paper will present the design configuration, analysis and preliminary test results.

  6. High performance cloud auditing and applications

    CERN Document Server

    Choi, Baek-Young; Song, Sejun

    2014-01-01

    This book mainly focuses on cloud security and high performance computing for cloud auditing. The book discusses emerging challenges and techniques developed for high performance semantic cloud auditing, and presents the state of the art in cloud auditing, computing and security techniques with focus on technical aspects and feasibility of auditing issues in federated cloud computing environments.   In summer 2011, the United States Air Force Research Laboratory (AFRL) CyberBAT Cloud Security and Auditing Team initiated the exploration of the cloud security challenges and future cloud auditing research directions that are covered in this book. This work was supported by the United States government funds from the Air Force Office of Scientific Research (AFOSR), the AFOSR Summer Faculty Fellowship Program (SFFP), the Air Force Research Laboratory (AFRL) Visiting Faculty Research Program (VFRP), the National Science Foundation (NSF) and the National Institute of Health (NIH). All chapters were partially suppor...

  7. Microbial bioreporters of trace explosives.

    Science.gov (United States)

    Shemer, Benjamin; Koshet, Ori; Yagur-Kroll, Sharon; Belkin, Shimshon

    2017-06-01

    Since its introduction as an explosive in the late 19th century, 2,4,6-trinitrotoluene (TNT), along with other explosive compounds, has left numerous environmental marks. One of these is widespread soil and water pollution by trace explosives in military proving grounds, manufacturing facilities, or actual battlefields. Another dramatic impact is that exerted by the millions of landmines and other explosive devices buried in large parts of the world, causing extensive loss of life, injuries, and economical damage. In this review we highlight recent advances in the design and construction of microbial bioreporters, molecularly engineered to generate a quantifiable dose-dependent signal in the presence of trace amounts of explosives. Such sensor strains may be employed for monitoring environmental pollution as well as for the remote detection of buried landmines. Copyright © 2017 Elsevier Ltd. All rights reserved.

  8. Aluminum-Enhanced Underwater Electrical Discharges for Steam Explosion Triggering

    Energy Technology Data Exchange (ETDEWEB)

    HOGELAND, STEVE R.; NELSON, LLOYD S.; ROTH, THOMAS CHRISTOPHER

    1999-07-01

    For a number of years, we have been initiating steam explosions of single drops of molten materials with pressure and flow (bubble growth) transients generated by discharging a capacitor bank through gold bridgewires placed underwater. Recent experimental and theoretical advances in the field of steam explosions, however, have made it important to substantially increase these relatively mild transients in water without using high explosives, if possible. To do this with the same capacitor bank, we have discharged similar energies through tiny strips of aluminum foil submerged in water. By replacing the gold wires with the aluminum strips, we were able to add the energy of the aluminum-water combustion to that normally deposited electrically by the bridgewire explosion in water. The chemical enhancement of the explosive characteristics of the discharges was substantial: when the same electrical energies were discharged through the aluminum strips, peak pressures increased as much as 12-fold and maximum bubble volumes as much as 5-fold above those generated with the gold wires. For given weights of aluminum, the magnitudes of both parameters appeared to exceed those produced by the underwater explosion of equivalent weights of high explosives.

  9. Chlorine as a geobarometer tool: Application to the explosive eruptions of the Volcanic Campanian District (Mount Somma-Vesuvius, Phlegrean Fields, Ischia)

    Science.gov (United States)

    Balcone-Boissard, Hélène; Boudon, Georges; Zdanowicz, Géraldine; Orsi, Giovanni; Civetta, Lucia; Webster, Jim D.; Cioni, Raffaello; D'Antonio, Massimo

    2016-04-01

    One of the current stakes in modern volcanology is the definition of magma storage conditions which has direct implications on the eruptive style and thus on the associated risks and the management of likely related crisis. In alkaline differentiated magmas, chlorine (Cl), contrary to H2O, occurs as a minor volatile species but may be used as a geobarometer. Numerous experimental studies on Cl solubility have highlighted its saturation conditions in silicate melts. The NaCl-H2O system is characterized by immiscibility under wide ranges of pressure, temperature and NaCl content (Somma-Vesuvius, Phlegrean Fields and Ischia. We have analysed the products of the representative explosive eruptions of each volcano, including Plinian, sub-Plinian and strombolian events. We have focussed our research on the earliest emitted, most evolved products of each eruption, likely representing the shallower, fluid-saturated portion of the reservoir. As the studied eruptions cover the entire eruptive history of each volcanic system, the results allow better constraining the evolution through time of the shallow plumbing system. We highlighted for Mount Somma - Vesuvius two magma ponding zones, at ~170-200 MPa and ~105-115 MPa, alternatively active in time. For Phlegrean Fields, we evidence a progressive deepening of the shallow reservoirs, from the Campanian Ignimbrite (30-50 MPa) to the Monte Nuovo eruption (115 MPa). Only one eruption was studied for Ischia, the Cretaio eruption, that shows a reservoir at 140 MPa. The results on pressure are in large agreement with literature. The Cl geobarometer may help scientists to define the reservoir dynamics through time and provide strong constraints on pre-eruptive conditions, of utmost importance for the interpretation of the monitoring data and the identification of precursory signals.

  10. New application of scintillator ZnSe(Te) in scintielectronic detectors for detection of neutrons, medical imaging, explosive detection, and NDT

    Science.gov (United States)

    Ryzhikov, Volodymyr D.; Opolonin, Oleksandr D.; Fedorov, Alexander G.; Lysetska, Olena K.; Kostioukevitch, Sergey A.

    2008-08-01

    Scintillators on the basis of AIIBVI compounds, such as ZnSe(Te), can be used for detection of secondary charged particles coming from nuclear reactions in which neutrons interact with target nuclei of atoms present in transparent materials of dispersion scintillation detectors matrices. Using unique properties of scintillator ZnSe(Te) we show possibility of increase detection efficiency for soft x-ray radiation (20 - 90 keV). The amorphous silicon flat panels and the photodiode arrays wide used for non-destructive testing and medical imaging (spatial resolution 20 - 400 mkm). By our estimations, using of such detectors in combination with thin film of ZnSe(Te) can increase efficiency of registration of x-ray radiation (for the source of 60-140kV) in 1,2 - 2 times. We obtained thin films (10-450mkm) of scintillator ZnSe(Te) on the different substrate materials and estimated the relative light yield of the layers deposited on the graphite and Al2O3 ceramic substrates and the bulk ZnSe(Te) crystal. Use of ZnSe(Te) in the low-energy "scintillator - photodiode" type detector allowed to increase accuracy of authentication of explosives (HEIMANN X-RAY INSPECTION SYSTEM EDtS10080). Using the dual energy digital radiography system prototype we obtained the x-ray images (60 projections of each object). These images are basic data for computer tomography and three-dimensional reconstruction of density and effective atomic number. The color identification palette provides clearly show variations of effective atomic number in biological and inorganic objects. So, for example, changes of calcium concentration in a bone. The research described in this publication was supported by STCU #4115 and NATO SfP-982823.

  11. In-Situ Silver Acetylide Silver Nitrate Explosive Deposition Measurements Using X-Ray Fluorescence.

    Energy Technology Data Exchange (ETDEWEB)

    Covert, Timothy Todd

    2014-09-01

    The Light Initiated High Explosive facility utilized a spray deposited coating of silver acetylide - silver nitrate explosive to impart a mechanical shock into targets of interest. A diagnostic was required to measure the explosive deposition in - situ. An X - ray fluorescence spectrometer was deployed at the facility. A measurement methodology was developed to measure the explosive quantity with sufficient accuracy. Through the use of a tin reference material under the silver based explosive, a field calibration relationship has been developed with a standard deviation of 3.2 % . The effect of the inserted tin material into the experiment configuration has been explored.

  12. High-performance computing for airborne applications

    Energy Technology Data Exchange (ETDEWEB)

    Quinn, Heather M [Los Alamos National Laboratory; Manuzzato, Andrea [Los Alamos National Laboratory; Fairbanks, Tom [Los Alamos National Laboratory; Dallmann, Nicholas [Los Alamos National Laboratory; Desgeorges, Rose [Los Alamos National Laboratory

    2010-06-28

    Recently, there has been attempts to move common satellite tasks to unmanned aerial vehicles (UAVs). UAVs are significantly cheaper to buy than satellites and easier to deploy on an as-needed basis. The more benign radiation environment also allows for an aggressive adoption of state-of-the-art commercial computational devices, which increases the amount of data that can be collected. There are a number of commercial computing devices currently available that are well-suited to high-performance computing. These devices range from specialized computational devices, such as field-programmable gate arrays (FPGAs) and digital signal processors (DSPs), to traditional computing platforms, such as microprocessors. Even though the radiation environment is relatively benign, these devices could be susceptible to single-event effects. In this paper, we will present radiation data for high-performance computing devices in a accelerated neutron environment. These devices include a multi-core digital signal processor, two field-programmable gate arrays, and a microprocessor. From these results, we found that all of these devices are suitable for many airplane environments without reliability problems.

  13. High temperature superconductors in electromagnetic applications

    CERN Document Server

    Richens, P E

    2000-01-01

    powder-in-tube and dip-coated, have been made using a novel single loop tensometer that enables the insertion of a reasonably long length of conductor into the bore of a high-field magnet. The design, construction, and characterization of a High Temperature Superconducting (HTS) magnet is described. The design stage has involved the development of computer software for the calculation of the critical current of a solenoid wound from anisotropic HTS conductor. This calculation can be performed for a variety of problems including those involving magnetic materials such as iron by the incorporation of finite element electromagnetic analysis software. This has enabled the optimization of the magnet's performance. The HTS magnet is wound from 190 m of silver-matrix Bi sub 2 Sr sub 2 Ca sub 2 Cu sub 3 O sub 1 sub 0 powder-in-tube tape conductor supplied by Intermagnetics General Corporation. The dimensions are 70 mm bore and 70 mm length, and it consists of 728 turns. Iron end-plates were utilized in order to reduc...

  14. Nucleosynthesis in stellar explosions

    Energy Technology Data Exchange (ETDEWEB)

    Woosley, S.E.; Axelrod, T.S.; Weaver, T.A.

    1983-01-01

    The final evolution and explosion of stars from 10 M/sub solar/ to 10/sup 6/ M/sub solar/ are reviewed with emphasis on factors affecting the expected nucleosynthesis. We order our paper in a sequence of decreasing mass. If, as many suspect, the stellar birth function was peaked towards larger masses at earlier times (see e.g., Silk 1977; but also see Palla, Salpeter, and Stahler 1983), this sequence of masses might also be regarded as a temporal sequence. At each stage of Galactic chemical evolution stars form from the ashes of preceding generations which typically had greater mass. A wide variety of Type I supernova models, most based upon accreting white dwarf stars, are also explored using the expected light curves, spectra, and nucleosynthesis as diagnostics. No clearly favored Type I model emerges that is capable of simultaneously satisfying all three constraints.

  15. Mixing in explosions

    Energy Technology Data Exchange (ETDEWEB)

    Kuhl, A.L.

    1993-12-01

    Explosions always contain embedded turbulent mixing regions, for example: boundary layers, shear layers, wall jets, and unstable interfaces. Described here is one particular example of the latter, namely, the turbulent mixing occurring in the fireball of an HE-driven blast wave. The evolution of the turbulent mixing was studied via two-dimensional numerical simulations of the convective mixing processes on an adaptive mesh. Vorticity was generated on the fireball interface by baroclinic effects. The interface was unstable, and rapidly evolved into a turbulent mixing layer. Four phases of mixing were observed: (1) a strong blast wave phase; (2) and implosion phase; (3) a reshocking phase; and (4) an asymptotic mixing phase. The flowfield was azimuthally averaged to evaluate the mean and r.m.s. fluctuation profiles across the mixing layer. The vorticity decayed due to a cascade process. This caused the corresponding enstrophy parameter to increase linearly with time -- in agreement with homogeneous turbulence calculations of G.K. Batchelor.

  16. Numerical Simulation of Explosive Forming Using Detonating Fuse

    OpenAIRE

    H Iyama; Higa, Y.; Nishi, M.; Itoh, S.

    2017-01-01

    The explosive forming is a characteristic method. An underwater shock wave is generated by underwater explosion of an explosive. A metal plate is affected high strain rate by the shock loading and is formed along a metal die. Although this method has the advantage of mirroring the shape of the die, a free forming was used in this paper. An expensive metal die is not necessary for this free forming. It is possible that a metal plate is formed with simple supporting parts. However, the forming ...

  17. Self-commutating converters for high power applications

    CERN Document Server

    Arrillaga, Jos; Watson, Neville R; Murray, Nicholas J

    2010-01-01

    For very high voltage or very high current applications, the power industry still relies on thyristor-based Line Commutated Conversion (LCC), which limits the power controllability to two quadrant operation. However, the ratings of self-commutating switches such as the Insulated-Gate Bipolar Transistor (IGBT) and Integrated Gate-Commutated Thyristor (IGCT), are reaching levels that make the technology possible for very high power applications. This unique book reviews the present state and future prospects of self-commutating static power converters for applications requiring either ultr

  18. High resolution imaging detectors and applications

    CERN Document Server

    Saha, Swapan K

    2015-01-01

    Interferometric observations need snapshots of very high time resolution of the order of (i) frame integration of about 100 Hz or (ii) photon-recording rates of several megahertz (MHz). Detectors play a key role in astronomical observations, and since the explanation of the photoelectric effect by Albert Einstein, the technology has evolved rather fast. The present-day technology has made it possible to develop large-format complementary metal oxide–semiconductor (CMOS) and charge-coupled device (CCD) array mosaics, orthogonal transfer CCDs, electron-multiplication CCDs, electron-avalanche photodiode arrays, and quantum-well infrared (IR) photon detectors. The requirements to develop artifact-free photon shot noise-limited images are higher sensitivity and quantum efficiency, reduced noise that includes dark current, read-out and amplifier noise, smaller point-spread functions, and higher spectral bandwidth. This book aims to address such systems, technologies and design, evaluation and calibration, control...

  19. Applications of High Throughput Nucleotide Sequencing

    DEFF Research Database (Denmark)

    Waage, Johannes Eichler

    The recent advent of high throughput sequencing of nucleic acids (RNA and DNA) has vastly expanded research into the functional and structural biology of the genome of all living organisms (and even a few dead ones). With this enormous and exponential growth in biological data generation come...... equally large demands in data handling, analysis and interpretation, perhaps defining the modern challenge of the computational biologist of the post-genomic era. The first part of this thesis consists of a general introduction to the history, common terms and challenges of next generation sequencing......, focusing on oft encountered problems in data processing, such as quality assurance, mapping, normalization, visualization, and interpretation. Presented in the second part are scientific endeavors representing solutions to problems of two sub-genres of next generation sequencing. For the first flavor, RNA-sequencing...

  20. Applications of High Throughput Nucleotide Sequencing

    DEFF Research Database (Denmark)

    Waage, Johannes Eichler

    The recent advent of high throughput sequencing of nucleic acids (RNA and DNA) has vastly expanded research into the functional and structural biology of the genome of all living organisms (and even a few dead ones). With this enormous and exponential growth in biological data generation come...... equally large demands in data handling, analysis and interpretation, perhaps defining the modern challenge of the computational biologist of the post-genomic era. The first part of this thesis consists of a general introduction to the history, common terms and challenges of next generation sequencing......). For the second flavor, DNA-seq, a study presenting genome wide profiling of transcription factor CEBP/A in liver cells undergoing regeneration after partial hepatectomy (article IV) is included....

  1. The application of high dose food irradiation

    Energy Technology Data Exchange (ETDEWEB)

    Bruyn, I. De [Atomic Energy Corporation of South Africa LTD, Building 2000, P.O. Box 582, Pretoria 0001, (South Africa)

    1997-12-31

    During the 1950`s to end 1970`s the United States Army developed the basic methodology to produce shelf stable irradiated meat, seafood and poultry products. These products are normally packed without gravy, sauce or brine, as liquid is not required to sterilize the product as in the canning process. This leads to the distinctive `dried cooked` taste normally associated with roasts opposed to the casserole taste usually associated with tinned meats. The meats are cooked, chilled, portioned, vacuum packed and irradiated to the required minimum dose of 25 to 45 kGy (depending on the product) at a temperature of between -20 and -40 Centigrade to ensure absolute sterility even under tropical conditions. The product is packaged in a high quality four layer laminate pouch and will therefore not rust or burst even under adverse weather conditions. The product can be guaranteed for more than two years as long as the integrity of the packaging is maintained. (Author)

  2. High performance computing applications in neurobiological research

    Science.gov (United States)

    Ross, Muriel D.; Cheng, Rei; Doshay, David G.; Linton, Samuel W.; Montgomery, Kevin; Parnas, Bruce R.

    1994-01-01

    The human nervous system is a massively parallel processor of information. The vast numbers of neurons, synapses and circuits is daunting to those seeking to understand the neural basis of consciousness and intellect. Pervading obstacles are lack of knowledge of the detailed, three-dimensional (3-D) organization of even a simple neural system and the paucity of large scale, biologically relevant computer simulations. We use high performance graphics workstations and supercomputers to study the 3-D organization of gravity sensors as a prototype architecture foreshadowing more complex systems. Scaled-down simulations run on a Silicon Graphics workstation and scale-up, three-dimensional versions run on the Cray Y-MP and CM5 supercomputers.

  3. Application and Prospects of High-strength Lightweight Materials used in Coal mine

    Science.gov (United States)

    He, Pan

    2017-09-01

    This paper describes some high-strength lightweight materials used in coal mine, and if their performance can meet the requirements of underground safety for explosion-proof, anti-static, friction sparks mine; and reviewed the species, characteristic, preparation process of high-strength lightweight materials for having inspired lightweight high-strength performance by modifying or changing the synthesis mode used in coal mine equipment.

  4. High performance photonic ADC for space applications

    Science.gov (United States)

    Pantoja, S.; Piqueras, M. A.; Villalba, P.; Martínez, B.; Rico, E.

    2017-11-01

    The flexibility required for future telecom payloads will require of more digital processing capabilities, moving from conventional analogue repeaters to more advanced and efficient analog subsystems or DSPbased solutions. Aggregate data throughputs will have to be handled onboard, creating the need for effective, ADC/DSP and DSP/DAC high speed links. Broadband payloads will have to receive, route and retransmit hundreds of channels and need to be designed so as to meet such requirements of larger bandwidth, system transparency and flexibility.[1][2] One important device in these new architectures is analog to digital converter (ADC) and its equivalent digital to analog converter (DAC). These will be the in/out interface for the use of digital processing in order to provide flexible beam to beam connectivity and variable bandwidth allocation. For telecom payloads having a large number of feeds and thus a large number of converters the mass and consumption of the mixer stage has become significant. Moreover, the inclusion of ADCs in the payload presents new trade-offs in design (jitter, quantization noise, ambiguity). This paper deals with an alternative solution of these two main problems with the exploitation of photonic techniques.

  5. High spatial resolution probes for neurobiology applications

    Science.gov (United States)

    Gunning, D. E.; Kenney, C. J.; Litke, A. M.; Mathieson, K.

    2009-06-01

    Position-sensitive biological neural networks, such as the brain and the retina, require position-sensitive detection methods to identify, map and study their behavior. Traditionally, planar microelectrodes have been employed to record the cell's electrical activity with device limitations arising from the electrode's 2-D nature. Described here is the development and characterization of an array of electrically conductive micro-needles aimed at addressing the limitations of planar electrodes. The capability of this array to penetrate neural tissue improves the electrode-cell electrical interface and allows more complicated 3-D networks of neurons, such as those found in brain slices, to be studied. State-of-the-art semiconductor fabrication techniques were used to etch and passivate conformally the metal coat and fill high aspect ratio holes in silicon. These are subsequently transformed into needles with conductive tips. This process has enabled the fabrication of arrays of unprecedented dimensions: 61 hexagonally close-packed electrodes, ˜200 μm tall with 60 μm spacing. Electroplating the tungsten tips with platinum ensure suitable impedance values (˜600 kΩ at 1 kHz) for the recording of neuronal signals. Without compromising spatial resolution of the neuronal recordings, this array adds a new and exciting dimension to the study of biological neural networks.

  6. Development and application of high-end aerospace MEMS

    Science.gov (United States)

    Yuan, Weizheng

    2017-12-01

    This paper introduces the design and manufacturing technology of aerospace microelectromechanical systems (MEMS) characterized by high performance, multi-variety, and small batch. Moreover, several kinds of special MEMS devices with high precision, high reliability, and environmental adaptability, as well as their typical applications in the fields of aeronautics and aerospace, are presented.

  7. Parameters affecting the thermal behaviour of emulsion explosives

    Energy Technology Data Exchange (ETDEWEB)

    Jones, D.E.G.; Feng, H.; Mintz, K.J.; Augsten, R.A. [Natural Resources Canada, Ottawa, ON (Canada). Canadian Explosives Research Laboratory

    1999-07-01

    Accelerating rate calorimetry (ARC) and heat flux calorimetry (HFC) were used to study the sensitivity of ammonium nitrate (AN) and emulsion explosives to pressure and various other parameters. The explosives were evaluated in a series of experiments that examined the influence of pressure in both Argon and air environments at 5.4 MPa. Results of the study demonstrated that significantly lower onset temperatures were observed when the ammonium nitrate (AN) explosive was used in air. Results of the ARC study suggested that lower initial temperatures resulted in an elevated onset temperature. Lower onset temperatures observed in the study were attributed to oxidation of the oil phase in the emulsion. Onset temperatures for the AN explosive were lower than rates observed for the emulsion explosives. The size of the samples also influenced onset temperatures in both the ARC and HFC analyses. At heating rates of 0.1 degrees C per minute, the results of heat flux calorimetry revealed a complex exotherm pattern for the emulsion explosive in both Argon and in air. The high pressure of inert gas inhibited and delayed the exothermic reactions for the emulsion explosives. It was concluded that air-oxidative decomposition results in lower onset temperatures that are influenced by higher pressure rates. 8 refs., 3 tabs., 8 figs.

  8. Discriminating between explosions and earthquakes

    Science.gov (United States)

    Cho, Kwang-Hyun

    2014-12-01

    Earthquake, explosion, and a nuclear test data are compared with forward modeling and band-pass filtered surface wave amplitude data for exploring methodologies to improve earthquake-explosion discrimination. The proposed discrimination method is based on the solutions of a double integral transformation in the wavenumber and frequency domains. Recorded explosion data on June 26, 2001 (39.212°N, 125.383°E) and October 30, 2001 (38.748°N, 125.267°E), a nuclear test on October 9, 2006 (41.275°N, 129.095°E), and two earthquakes on April 14, 2002 (39.207°N, 125.686°E) and June 7, 2002 (38.703°N, 125.638°E), all in North Korea, are used to discriminate between explosions and earthquakes by seismic wave analysis and numerical modeling. The explosion signal is characterized by first P waves with higher energy than that of S waves. Rg waves are clearly dominant at 0.05-0.5 Hz in the explosion data but not in the earthquake data. This feature is attributed to the dominant P waves in the explosion and their coupling with the SH components.

  9. Initiation and Propagation in Primary Explosives

    Science.gov (United States)

    Dickson, P. M.; Field, J. E.

    1993-05-01

    The initiation and propagation of deflagration and detonation in mercury fulminate, lead azide, mercuric-5-nitrotetrazole and silver-5-nitrotetrazole have been studied using various techniques. Streak and framing high-speed photography were used to observe these events directly. The main aim has been to investigate the factors which affect deflagration-to-detonation transition (DDT) and the related phenomenon of dead-pressing, which may be regarded as a failure of the DDT process at high pressed densities. These factors include the variable properties of pressed density, void structure, confinement and charge dimension and geometry, and also fixed properties (for a given explosive) such as shock and thermal sensitivities, heat of explosion and the quantity and state of the reaction products. The nature and strength of the initiating stimulus also have a major effect on the subsequent reaction.

  10. Optical fiber sensor for nitroaromatic explosives based on fluorescence quenching

    Science.gov (United States)

    Chu, Fenghong

    2010-10-01

    The detection of explosives and related compounds is important in both forensic and environmental applications. In this paper, we report on the preparation of novel plastic optical fiber explosive sensor based on fluorescence quenching. A low priced LED light source and PIN detector were used in this sensor system, a U-shaped plastic optical fiber with high sensitivity act as sensor head. We use amplifying fluorescent polymers (AFP) MEH-PPV as fluorescence indictor. MEHPPV was dip coated on to the surface of the U-shaped plastic optical fiber. For the first time as far as we know we detected the fluorescence lifetime by the phase-fluorometry method to measure the concentration of TNT, which has a merit of immunity to fluctuation of the light source and is more reliable than measuring intensity alone. In the experimental set-up the phase shift between excitation light and fluorescence is calculated by correlation method. Two degree phase difference was measured when the sensor head was exposed to TNT vapor and air in primary experiments.

  11. Deformation and shock consolidation of various sands under explosive loading

    Science.gov (United States)

    Weckert, S. A.; Resnyansky, A. D.

    2015-06-01

    Transmission of a shock wave through various geological materials is important in military applications, for assessing the effects from a buried explosive device to an above-ground target. The composition of a real soil is complex and involves multiple constituents that undergo a number of physical and mechanical transformations during the shock loading. The present study analyzes several model soils represented by limestone sand, silica sand, and a small aggregate soil. The soils are compressed using two different steel encapsulation assemblies subject to explosive compression. These set-ups attempt to vary the level of applied load to the encapsulated soil and the length of the high-temperature effects. The assemblies are instrumented with embedded manganin gauges within the encapsulation casing for comparative analysis of the waves propagating through the soil and steel encapsulation. A comparative analysis of the recovered soil samples, including a microstructural analysis focusing on the grain breakage, soil compaction and consolidation, is correlated with a CTH numerical analysis employing a multi-phase rate sensitive material model.

  12. Design of a miniature explosive isentropic compression experiment

    Energy Technology Data Exchange (ETDEWEB)

    Tasker, Douglas G [Los Alamos National Laboratory

    2010-01-01

    The purpose of this design study is to adapt the High Explosive Pulsed Power Isentropic Compression Experiment (HEPP-ICE) to milligram quantities of materials at stresses of {approx}100 GPa. For this miniature application we assume that a parallel plate stripline of {approx}2.5 mm width is needed to compress the samples. In any parallel plate load, the rising currents flow preferentially along the outside edges of the load where the specific impedance is a minimum [1]. Therefore, the peak current must be between 1 and 2 MA to reach a stress of 100 GPa in the center of a 2.5 mm wide parallel plate load; these are small relative to typical HEPP-ICE currents. We show that a capacitor bank alone exceeds the requirements of this miniature ICE experiment and a flux compression generator (FCG) is not necessary. The proposed circuit will comprise one half of the 2.4-MJ bank, i.e., the 6-mF, 20-kV, 1.2 MJ capacitor bank used in the original HEPP-ICE circuit. Explosive opening and closing switches will still be required because the rise time of the capacitor circuit would be of the order of 30 {micro}s without them. For isentropic loading in these small samples, stress rise times of {approx}200 ns are required.

  13. High-power converters for space applications

    Science.gov (United States)

    Park, J. N.; Cooper, Randy

    1991-06-01

    Phase 1 was a concept definition effort to extend space-type dc/dc converter technology to the megawatt level with a weight of less than 0.1 kg/kW (220 lb./MW). Two system designs were evaluated in Phase 1. Each design operates from a 5 kV stacked fuel cell source and provides a voltage step-up to 100 kV at 10 A for charging capacitors (100 pps at a duty cycle of 17 min on, 17 min off). Both designs use an MCT-based, full-bridge inverter, gaseous hydrogen cooling, and crowbar fault protection. The GE-CRD system uses an advanced high-voltage transformer/rectifier filter is series with a resonant tank circuit, driven by an inverter operating at 20 to 50 kHz. Output voltage is controlled through frequency and phase shift control. Fast transient response and stability is ensured via optimal control. Super-resonant operation employing MCTs provides the advantages of lossless snubbing, no turn-on switching loss, use of medium-speed diodes, and intrinsic current limiting under load-fault conditions. Estimated weight of the GE-CRD system is 88 kg (1.5 cu ft.). Efficiency of 94.4 percent and total system loss is 55.711 kW operating at 1 MW load power. The Maxwell system is based on a resonance transformer approach using a cascade of five LC resonant sections at 100 kHz. The 5 kV bus is converted to a square wave, stepped-up to a 100 kV sine wave by the LC sections, rectified, and filtered. Output voltage is controlled with a special series regulator circuit. Estimated weight of the Maxwell system is 83.8 kg (4.0 cu ft.). Efficiency is 87.2 percent and total system loss is 146.411 kW operating at 1 MW load power.

  14. Application of Beyond Bound Decoding for High Speed Optical Communications

    DEFF Research Database (Denmark)

    Li, Bomin; Larsen, Knud J.; Vegas Olmos, Juan José

    2013-01-01

    This paper studies the application of beyond bound decoding method for high speed optical communications. This hard-decision decoding method outperforms traditional minimum distance decoding method, with a total net coding gain of 10.36 dB....

  15. Fire and explosion hazards to flora and fauna from explosives.

    Science.gov (United States)

    Merrifield, R

    2000-06-30

    Deliberate or accidental initiation of explosives can produce a range of potentially damaging fire and explosion effects. Quantification of the consequences of such effects upon the surroundings, particularly on people and structures, has always been of paramount importance. Information on the effects on flora and fauna, however, is limited, with probably the weakest area lying with fragmentation of buildings and their effects on different small mammals. Information has been used here to gain an appreciation of the likely magnitude of the potential fire and explosion effects on flora and fauna. This is based on a number of broad assumptions and a variety of data sources including World War II bomb damage, experiments performed with animals 30-40 years ago, and more recent field trials on building break-up under explosive loading.

  16. Optical Thermal Characterization Enables High-Performance Electronics Applications

    Energy Technology Data Exchange (ETDEWEB)

    2016-02-01

    NREL developed a modeling and experimental strategy to characterize thermal performance of materials. The technique provides critical data on thermal properties with relevance for electronics packaging applications. Thermal contact resistance and bulk thermal conductivity were characterized for new high-performance materials such as thermoplastics, boron-nitride nanosheets, copper nanowires, and atomically bonded layers. The technique is an important tool for developing designs and materials that enable power electronics packaging with small footprint, high power density, and low cost for numerous applications.

  17. Dynamic Fracture Simulations of Explosively Loaded Cylinders

    Energy Technology Data Exchange (ETDEWEB)

    Arthur, Carly W. [Univ. of California, Davis, CA (United States). Dept. of Civil and Environmental Engineering; Goto, D. M. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2015-11-30

    This report documents the modeling results of high explosive experiments investigating dynamic fracture of steel (AerMet® 100 alloy) cylinders. The experiments were conducted at Lawrence Livermore National Laboratory (LLNL) during 2007 to 2008 [10]. A principal objective of this study was to gain an understanding of dynamic material failure through the analysis of hydrodynamic computer code simulations. Two-dimensional and three-dimensional computational cylinder models were analyzed using the ALE3D multi-physics computer code.

  18. Hamiltonian approach for explosive percolation.

    Science.gov (United States)

    Moreira, A A; Oliveira, E A; Reis, S D S; Herrmann, H J; Andrade, J S

    2010-04-01

    We present a cluster growth process that provides a clear connection between equilibrium statistical mechanics and an explosive percolation model similar to the one recently proposed by D. Achlioptas [Science 323, 1453 (2009)]. We show that the following two ingredients are sufficient for obtaining an abrupt (first-order) transition in the fraction of the system occupied by the largest cluster: (i) the size of all growing clusters should be kept approximately the same, and (ii) the inclusion of merging bonds (i.e., bonds connecting vertices in different clusters) should dominate with respect to the redundant bonds (i.e., bonds connecting vertices in the same cluster). Moreover, in the extreme limit where only merging bonds are present, a complete enumeration scheme based on treelike graphs can be used to obtain an exact solution of our model that displays a first-order transition. Finally, the presented mechanism can be viewed as a generalization of standard percolation that discloses a family of models with potential application in growth and fragmentation processes of real network systems.

  19. A Hydrogen Ignition Mechanism for Explosions in Nuclear Facility Piping Systems

    Energy Technology Data Exchange (ETDEWEB)

    Leishear, Robert A.

    2013-09-18

    Hydrogen explosions may occur simultaneously with water hammer accidents in nuclear facilities, and a theoretical mechanism to relate water hammer to hydrogen deflagrations and explosions is presented herein. Hydrogen and oxygen generation due to the radiolysis of water is a recognized hazard in pipe systems used in the nuclear industry, where the accumulation of hydrogen and oxygen at high points in the pipe system is expected, and explosive conditions may occur. Pipe ruptures in nuclear reactor cooling systems were attributed to hydrogen explosions inside pipelines, i.e., Hamaoka, Nuclear Power Station in Japan, and Brunsbuettel in Germany. Prior to these accidents, an ignition source for hydrogen was not clearly demonstrated, but these accidents demonstrated that a mechanism was, in fact, available to initiate combustion and explosion. A new theory to identify an ignition source and explosion cause is presented here, and further research is recommended to fully understand this explosion mechanism.

  20. Numerical Simulation of Explosive Forming Using Detonating Fuse

    Directory of Open Access Journals (Sweden)

    H Iyama

    2017-09-01

    Full Text Available The explosive forming is a characteristic method. An underwater shock wave is generated by underwater explosion of an explosive. A metal plate is affected high strain rate by the shock loading and is formed along a metal die. Although this method has the advantage of mirroring the shape of the die, a free forming was used in this paper. An expensive metal die is not necessary for this free forming. It is possible that a metal plate is formed with simple supporting parts. However, the forming shape is depend on the shock pressure distribution act on the metal plate. This pressure distribution is able to change by the shape of explosive, a mass of explosive and a shape of pressure vessel. On the other hand, we need the pressure vessel for food processing by the underwater shock wave. Therefore, we propose making the pressure vessel by this explosive forming. One design suggestion of pressure vessel made of stainless steel was considered. However, we cannot decide suitable conditions, the mass of the explosive and the distance between the explosive and the metal plate to make the pressure vessel. In order to decide these conditions, we have tried the numerical simulation on this explosive forming. The basic simulation method was ALE (Arbitrary Laglangian Eulerian method including with Mie-Grümeisen EOS (equation of state, JWL EOS, Johnson-Cook constitutive equation for a material model. In this paper, the underwater pressure contours to clear the propagations of the underwater shock wave, forming processes and deformation velocity of the metal plate is shown and it will be discussed about those results.

  1. Applications of nonimaging optics for very high solar concentrations

    Energy Technology Data Exchange (ETDEWEB)

    O`Gallagher, J.; Winston, R.

    1997-12-31

    Using the principles and techniques of nonimaging optics, solar concentrations that approach the theoretical maximum can be achieved. This has applications in solar energy collection wherever concentration is desired. In this paper, we survey recent progress in attaining and using high and ultrahigh solar fluxes. We review a number of potential applications for highly concentrated solar energy and the current status of the associated technology. By making possible new and unique applications for intense solar flux, these techniques have opened a whole new frontier for research and development of potentially economic uses of solar energy.

  2. Photographic Study Of A Dead-Pressed Explosive

    Science.gov (United States)

    Swallowe, G. M.; Field, J. E.

    1983-03-01

    High speed photography in conjunction with electron microscopy and a pressure measuring technique have been used to investigate the differences between dead-pressed and non-dead-pressed samples of the primary explosive Mercury Fulminate (Hg Ful). Photographs of reaction propagation were taken in transmitted light using a specially adapted drop-weight machine with transparent anvils. The results of these experiments suggested a mechanism for dead-pressing in Hg Ful based on the microscopic internal structure of the compacted explosive.

  3. Testing of Confining Pressure Impacton Explosion Energy of Explosive Materials

    Science.gov (United States)

    Drzewiecki, Jan; Myszkowski, Jacek; Pytlik, Andrzej; Pytlik, Mateusz

    2017-06-01

    This paper presents the results of testing the explosion effects of two explosive charges placed in an environment with specified values of confining pressure. The aim of this study is to determine the impact of variable environmental conditions on the suitability of particular explosives for their use in the prevention of natural hazards in hard coal mining. The research results will contribute to improving the efficiency of currently adopted technologies of natural hazard prevention and aid in raising the level of occupational safety. To carry out the subject matter measurements, a special test stand was constructed which allows the value of the initial pressure inside the chamber, which constitutes its integral part, to be altered before the detonation of the charge being tested. The obtained characteristics of the pressure changes during the explosion of the analysed charge helped to identify the work (energy) which was produced during the process. The test results are a valuable source of information, opening up new possibilities for the use of explosives, the development of innovative solutions for the construction of explosive charges and their initiation.

  4. Apollo Spacecraft and Saturn V Launch Vehicle Pyrotechnics/Explosive Devices

    Science.gov (United States)

    Interbartolo, Michael

    2009-01-01

    The Apollo Mission employs more than 210 pyrotechnic devices per mission.These devices are either automatic of commanded from the Apollo spacecraft systems. All devices require high reliability and safety and most are classified as either crew safety critical or mission critical. Pyrotechnic devices have a wide variety of applications including: launch escape tower separation, separation rocket ignition, parachute deployment and release and electrical circuit opening and closing. This viewgraph presentation identifies critical performance, design requirements and safety measures used to ensure quality, reliability and performance of Apollo pyrotechnic/explosive devices. The major components and functions of a typical Apollo pyrotechnic/explosive device are listed and described (initiators, cartridge assemblies, detonators, core charges). The presentation also identifies the major locations and uses for the devices on: the Command and Service Module, Lunar Module and all stages of the launch vehicle.

  5. The detection of improvised nonmilitary peroxide based explosives using a titania nanotube array sensor

    Science.gov (United States)

    Banerjee, Subarna; Mohapatra, Susanta K.; Misra, Mano; Mishra, Indu B.

    2009-02-01

    There is a critical need to develop an efficient, reliable and highly selective sensor for the detection of improvised nonmilitary explosives. This paper describes the utilization of functionalized titania nanotube arrays for sensing improvised organic peroxide explosives such as triacetone triperoxide (TATP). TATP forms complexes with titania nanotube arrays (prepared by anodization and sensitized with zinc ions) and thus affects the electron state of the nanosensing device, which is signaled as a change in current of the overall nanotube material. The response is rapid and a signal of five to eight orders of magnitude is observed. These nanotube array sensors can be used as hand-held miniaturized devices as well as large scale portable units for military and homeland security applications.

  6. DOE explosives safety manual. Revision 7

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    This manual prescribes the Department of Energy (DOE) safety rules used to implement the DOE safety policy for operations involving explosives. This manual is applicable to all DOE facilities engaged in operations of development, manufacturing, handling, storage, transportation, processing, or testing of explosives, pyrotechnics and propellants, or assemblies containing these materials. The standards of this manual deal with the operations involving explosives, pyrotechnics and propellants, and the safe management of such operations. The design of all new explosives facilities shall conform to the requirements established in this manual and implemented in DOE 6430.1A, ``General Design Criteria Manual.`` It is not intended that existing physical facilities be changed arbitrarily to comply with these provisions, except as required by law. Existing facilities that do not comply with these standards may continue to be used for the balance of their functional life, as long as the current operation presents no significantly greater risk than that assumed when the facility was originally designed and it can be demonstrated clearly that a modification to bring the facility into compliance is not feasible. However, in the case of a major renovation, the facility must be brought into compliance with current standards. The standards are presented as either mandatory or advisory. Mandatory standards, denoted by the words ``shall,`` ``must,`` or ``will,`` are requirements that must be followed unless written authority for deviation is granted as an exemption by the DOE. Advisory standards denoted by ``should`` or ``may`` are standards that may be deviated from with a waiver granted by facility management.

  7. High Power Fiber Lasers and Applications to Manufacturing

    Science.gov (United States)

    Richardson, Martin; McComb, Timothy; Sudesh, Vikas

    2008-09-01

    We summarize recent developments in high power fiber laser technologies and discuss future trends, particularly in their current and future use in manufacturing technologies. We will also describe our current research programs in fiber laser development, ultra-fast and new lasers, and will mention the expectations in these areas for the new Townes Laser Institute. It will focus on new core laser technologies and their applications in medical technologies, advanced manufacturing technologies and defense applications. We will describe a program on large mode area fiber development that includes results with the new gain-guiding approach, as well as high power infra-red fiber lasers. We will review the opportunities for high power fiber lasers in various manufacturing technologies and illustrate this with applications we are pursuing in the areas of femtosecond laser applications, advanced lithographies, and mid-IR technologies.

  8. [Causation, prevention and treatment of dust explosion].

    Science.gov (United States)

    Dong, Maolong; Jia, Wenbin; Wang, Hongtao; Han, Fei; Li, Xiao-Qiang; Hu, Dahai

    2014-10-01

    With the development of industrial technology, dust explosion accidents have increased, causing serious losses of people's lives and property. With the development of economy, we should lay further emphasis on causation, prevention, and treatment of dust explosion. This article summarizes the background, mechanism, prevention, and treatment of dust explosion, which may provide some professional knowledge and reference for the treatment of dust explosion.

  9. Explosives mimic for testing, training, and monitoring

    Energy Technology Data Exchange (ETDEWEB)

    Reynolds, John G.; Durban, Matthew M.; Gash, Alexander E.; Grapes, Michael D.; Kelley, Ryan S.; Sullivan, Kyle T.

    2018-02-13

    Additive Manufacturing (AM) is used to make mimics for explosives. The process uses mixtures of explosives and matrices commonly used in AM. The explosives are formulated into a mixture with the matrix and printed using AM techniques and equipment. The explosive concentrations are kept less than 10% by wt. of the mixture to conform to requirements of shipping and handling.

  10. Microglass spheres in ammonium nitrate explosives

    OpenAIRE

    Y. Kazakov; G. Turesheva; Olga Golovchenko; N. Bergeneva; R. Seisembayev

    2010-01-01

    Developed consisting the explosive ammonium nitrate, paraffin and mikrosteklosfer. Due to the input of the explosive paraffin increased water resistance of explosives to 60 minutes. By entering into the explosive mikrosteklosfers been improved caking indices, since steklomikrosfers and paraffin was formed seal between the granules of ammonium nitrate.

  11. Microglass spheres in ammonium nitrate explosives

    Directory of Open Access Journals (Sweden)

    Y. Kazakov

    2010-03-01

    Full Text Available Developed consisting the explosive ammonium nitrate, paraffin and mikrosteklosfer. Due to the input of the explosive paraffin increased water resistance of explosives to 60 minutes. By entering into the explosive mikrosteklosfers been improved caking indices, since steklomikrosfers and paraffin was formed seal between the granules of ammonium nitrate.

  12. Causes of the Cambrian Explosion

    National Research Council Canada - National Science Library

    M. Paul Smith; David A. T. Harper

    2013-01-01

    .... Recent hypotheses for the Cambrian explosion fall into three main categories: developmental/genetic, ecologic, and abiotic/environmental, with geochemical hypotheses forming an abundant and distinctive subset of the last...

  13. Shock Initiation of Wedge-shaped Explosive Measured with Smear Camera and Photon Doppler Velocimetry

    Science.gov (United States)

    Gu, Yan

    2017-06-01

    Triaminotrinitrobenzene (TATB) is an important insensitive high explosive in conventional weapons due to its safety and high energy. In order to have an insight into the shock initiation performance of a TATB-based insensitive high explosive (IHE), experimental measurements of the particle velocity histories of the TATB-based Explosive using Photon Doppler Velocimetry and shock wave profile of the TATB-based explosive using High Speed Rotating Mirror Smear Camera had been performed. In this paper, we would describe the shock initiation performance of the TATB-based explosive by run-to-detonation distance and the particle velocity history at an initialization shock of about 7.9 GPa. The parameters of hugoniot of unreacted the TATB-based explosive and Pop relationship could be derived with the particle velocity history obtained in this paper.

  14. Furball Explosive Breakout Test

    Energy Technology Data Exchange (ETDEWEB)

    Carroll, Joshua David [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2015-08-05

    For more than 30 years the Onionskin test has been the primary way to study the surface breakout of a detonation wave. Currently the Onionskin test allows for only a small, one dimensional, slice of the explosive in question to be observed. Asymmetrical features are not observable with the Onionskin test and its one dimensional view. As a result, in 2011, preliminary designs for the Hairball and Furball were developed then tested. The Hairball used shorting pins connected to an oscilloscope to determine the arrival time at 24 discrete points. This limited number of data points, caused by the limited number of oscilloscope channels, ultimately led to the Hairball’s demise. Following this, the Furball was developed to increase the number of data points collected. Instead of shorting pins the Furball uses fiber optics imaged by a streak camera to determine the detonation wave arrival time for each point. The original design was able to capture the detonation wave’s arrival time at 205 discrete points with the ability to increase the number of data points if necessary.

  15. Lidar Detection of Explosives Traces

    Directory of Open Access Journals (Sweden)

    Bobrovnikov Sergei M.

    2016-01-01

    Full Text Available The possibility of remote detection of traces of explosives using laser fragmentation/laser-induced fluorescence (LF/LIF is studied. Experimental data on the remote visualization of traces of trinitrotoluene (TNT, hexogen (RDX, trotyl-hexogen (Comp B, octogen (HMX, and tetryl with a scanning lidar detector of traces of nitrogen-containing explosives at a distance of 5 m are presented.

  16. Intraperitoneal explosion following gastric perforation.

    Science.gov (United States)

    Mansfield, Scott K; Borrowdale, Roderick

    2014-04-01

    The object of this study is to report a rare case of explosion during laparotomy where diathermy ignited intraperitoneal gas from a spontaneous stomach perforation. Fortunately, the patient survived but the surgeon experienced a finger burn. A literature review demonstrates other examples of intraoperative explosion where gastrointestinal gases were the fuel source. Lessons learned from these cases provide recommendations to prevent this potentially lethal event from occurring. Copyright © 2012. Published by Elsevier B.V.

  17. Intraperitoneal explosion following gastric perforation

    Directory of Open Access Journals (Sweden)

    Scott K. Mansfield

    2014-04-01

    Full Text Available The object of this study is to report a rare case of explosion during laparotomy where diathermy ignited intraperitoneal gas from a spontaneous stomach perforation. Fortunately, the patient survived but the surgeon experienced a finger burn. A literature review demonstrates other examples of intraoperative explosion where gastrointestinal gases were the fuel source. Lessons learned from these cases provide recommendations to prevent this potentially lethal event from occurring.

  18. exLOPA for explosion risks assessment.

    Science.gov (United States)

    Markowski, Adam S

    2007-04-11

    The European Union regulations require safety and health protection of workers who are potentially at risk from explosive atmosphere areas. According to the requirements, the operators of installations where potentially explosive atmosphere can occur are obliged to produce an explosion protection document. The key objective of this document is the assessment of explosion risks. This paper is concerned with the so-called explosion layer of protection analysis (exLOPA), which allows for semi-quantitative explosion risk assessment for process plants where explosive atmospheres occur. The exLOPA is based on the original work of CCPS for LOPA but takes into account some typical factors appropriate for explosion, like the probability that an explosive atmosphere will occur, probability that sources of ignition will be present and become effective as well as the probability of failure on demand for appropriate explosion prevention and mitigation means.

  19. Seismic explosion sources on an ice cap

    DEFF Research Database (Denmark)

    Shulgin, Alexey; Thybo, Hans

    2015-01-01

    Controlled source seismic investigation of crustal structure below ice covers is an emerging technique. We have recently conducted an explosive refraction/wide-angle reflection seismic experiment on the ice cap in east-central Greenland. The data-quality is high for all shot points and a full...... crustal model can be modelled. A crucial challenge for applying the technique is to control the sources. Here, we present data that describe the efficiency of explosive sources in the ice cover. Analysis of the data shows, that the ice cap traps a significant amount of energy, which is observed...... as a strong ice wave. The ice cap leads to low transmission of energy into the crust such that charges need be larger than in conventional onshore experiments to obtain reliable seismic signals. The strong reflection coefficient at the base of the ice generates strong multiples which may mask for secondary...

  20. Study on Explosive Forming of Aluminum Alloy

    Directory of Open Access Journals (Sweden)

    H Iyama

    2016-09-01

    Full Text Available Now, the aluminum alloy is often used as auto parts, for example, body, engine. For example, there are the body, a cylinder block, a piston, a connecting rod, interior, exterior parts, etc. These are practical used the characteristic of a light and strong aluminum alloy efficiently. However, although an aluminum alloy is lighter than steel, the elongation is smaller than that. Therefore, in press forming, some problems often occur. We have proposed use of explosive forming, in order to solve this problem. In the explosive forming, since a blank is formed at high speed, a strain rate effect becomes large and it can be made the elongation is larger. Then, in order to clarify this feature, we carried out experimental research and numerical analysis. In this paper, these contents will be discussed.

  1. Ex-Vessel corium coolability and steam explosion energetics in nordic light water reactors

    Energy Technology Data Exchange (ETDEWEB)

    Dinh, T.N.; Ma, W.M.; Karbojian, A.; Kudinov, P.; Tran, C.T.; Hansson, C.R. [Royal Institute of Technology (KTH), (Sweden)

    2008-03-15

    This report presents advances and insights from the KTH's study on corium pool heat transfer in the BWR lower head; debris bed formation; steam explosion energetics; thermal hydraulics and coolability in bottom-fed and heterogeneous debris beds. Specifically, for analysis of heat transfer in a BWR lower plenum an advanced threedimensional simulation tool was developed and validated, using a so-called effective convectivity approach and Fluent code platform. An assessment of corium retention and coolability in the reactor pressure vessel (RPV) lower plenum by means of water supplied through the Control Rod Guide Tube (CRGT) cooling system was performed. Simulant material melt experiments were performed in an intermediate temperature range (1300-1600K) on DEFOR test facility to study formation of debris beds in high and low subcooled water pools characteristic of in-vessel and ex-vessel conditions. Results of the DEFOR-E scoping experiments and related analyses strongly suggest that porous beds formed in ex-vessel from a fragmented high-temperature debris is far from homogeneous. Calculation results of bed thermal hydraulics and dryout heat flux with a two-dimensional thermal-hydraulic code give the first basis to evaluate the extent by which macro and micro inhomogeneity can enhance the bed coolability. The development and validation of a model for two-phase natural circulation through a heated porous medium and its application to the coolability analysis of bottom-fed beds enables quantification of the significant effect of dryout heat flux enhancement (by a factor of 80-160%) due to bottom coolant injection. For a qualitative and quantitative understanding of steam explosion, the SHARP system and its image processing methodology were used to characterize the dynamics of a hot liquid (melt) drop fragmentation and the volatile liquid (coolant) vaporization. The experimental results provide a basis to suggest that the melt drop preconditioning is instrumental to

  2. Contributed review: quantum cascade laser based photoacoustic detection of explosives.

    Science.gov (United States)

    Li, J S; Yu, B; Fischer, H; Chen, W; Yalin, A P

    2015-03-01

    Detecting trace explosives and explosive-related compounds has recently become a topic of utmost importance for increasing public security around the world. A wide variety of detection methods and an even wider range of physical chemistry issues are involved in this very challenging area. Optical sensing methods, in particular mid-infrared spectrometry techniques, have a great potential to become a more desirable tools for the detection of explosives. The small size, simplicity, high output power, long-term reliability make external cavity quantum cascade lasers (EC-QCLs) the promising spectroscopic sources for developing analytical instrumentation. This work reviews the current technical progress in EC-QCL-based photoacoustic spectroscopy for explosives detection. The potential for both close-contact and standoff configurations using this technique is completely presented over the course of approximately the last one decade.

  3. EXPLOSION OF ANNULAR CHARGE ON DUSTY SURFASE

    Directory of Open Access Journals (Sweden)

    A. Levin Vladimir

    2017-01-01

    Full Text Available This problem is related to the safety problem in the area of forest fires. It is well known that is possible to extinguish a fire, for example, by means of a powerful air stream. Such flow arises from the explosive shock wave. To enhance the im- pact of the blast wave can be used an explosive charge of annular shape. The shock wave, produced by the explosion, in- creased during moves to the center and can serve as a means of transportation dust in the seat of the fire. In addition, emerging after the collapse of a converging shock wave strong updraft can raise dust on a greater height and facilitate fire extinguishing, precipitating dust over a large area. This updraft can be dangerous for aircraft that are in the sky above the fire. To determine the width and height of the danger zone performed the numerical simulation of the ring of the explosion and the subsequent movement of dust and gas mixtures. The gas is considered ideal and perfect. The explosion is modeled as an instantaneous increase in the specific internal energy in an annular zone on the value of the specific heat of explosives. The flow is consid- ered as two-dimensional, and axisymmetric. The axis of symmetry perpendicular to the Earth surface. This surface is considered to be absolutely rigid and is considered as the boundary of the computational domain. On this surface is exhibited the condition of no motion. For the numerical method S. K. Godunov is used a movable grid. One system of lines of this grid is moved in accordance with movement of the shock wave. Others lines of this grid are stationary. The calculations were per- formed for different values of the radii of the annular field and for different sizes of rectangular cross-sectional of the annular field. Numerical results show that a very strong flow is occurring near the axis of symmetry and the particles rise high above the surface. These calculations allow us to estimate the sizes of the zone of danger in specific

  4. Applications of Silicon Carbide for High Temperature Electronics and Sensors

    Science.gov (United States)

    Shields, Virgil B.

    1995-01-01

    Silicon carbide (SiC) is a wide bandgap material that shows great promise in high-power and high temperature electronics applications because of its high thermal conductivity and high breakdown electrical field. The excellent physical and electronic properties of SiC allows the fabrication of devices that can operate at higher temperatures and power levels than devices produced from either silicon or GaAs. Although modern electronics depends primarily upon silicon based devices, this material is not capable of handling may special requirements. Devices which operate at high speeds, at high power levels and are to be used in extreme environments at high temperatures and high radiation levels need other materials with wider bandgaps than that of silicon. Many space and terrestrial applications also have a requirement for wide bandgap materials. SiC also has great potential for high power and frequency operation due to a high saturated drift velocity. The wide bandgap allows for unique optoelectronic applications, that include blue light emitting diodes and ultraviolet photodetectors. New areas involving gas sensing and telecommunications offer significant promise. Overall, the properties of SiC make it one of the best prospects for extending the capabilities and operational regimes of the current semiconductor device technology.

  5. High Efficiency Heat Exchanger for High Temperature and High Pressure Applications

    Energy Technology Data Exchange (ETDEWEB)

    Sienicki, James J. [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Lv, Qiuping [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division; Moisseytsev, Anton [Argonne National Lab. (ANL), Argonne, IL (United States). Nuclear Engineering Division

    2017-09-29

    CompRex, LLC (CompRex) specializes in the design and manufacture of compact heat exchangers and heat exchange reactors for high temperature and high pressure applications. CompRex’s proprietary compact technology not only increases heat exchange efficiency by at least 25 % but also reduces footprint by at least a factor of ten compared to traditional shell-and-tube solutions of the same capacity and by 15 to 20 % compared to other currently available Printed Circuit Heat Exchanger (PCHE) solutions. As a result, CompRex’s solution is especially suitable for Brayton cycle supercritical carbon dioxide (sCO2) systems given its high efficiency and significantly lower capital and operating expenses. CompRex has already successfully demonstrated its technology and ability to deliver with a pilot-scale compact heat exchanger that was under contract by the Naval Nuclear Laboratory for sCO2 power cycle development. The performance tested unit met or exceeded the thermal and hydraulic specifications with measured heat transfer between 95 to 98 % of maximum heat transfer and temperature and pressure drop values all consistent with the modeled values. CompRex’s vision is to commercialize its compact technology and become the leading provider for compact heat exchangers and heat exchange reactors for various applications including Brayton cycle sCO2 systems. One of the limitations of the sCO2 Brayton power cycle is the design and manufacturing of efficient heat exchangers at extreme operating conditions. Current diffusion-bonded heat exchangers have limitations on the channel size through which the fluid travels, resulting in excessive solid material per heat exchanger volume. CompRex’s design allows for more open area and shorter fluid proximity for increased heat transfer efficiency while sustaining the structural integrity needed for the application. CompRex is developing a novel improvement to its current heat exchanger design where fluids are directed to alternating

  6. Visual detection of trace nitroaromatic explosive residue using photoluminescent metallole-containing polymers.

    Science.gov (United States)

    Toal, Sarah J; Sanchez, Jason C; Dugan, Regina E; Trogler, William C

    2007-01-01

    The detection of trace explosives is important for forensic, military, and homeland security applications. Detection of widely used nitroaromatic explosives (trinitrotoluene [TNT], 2,4-dinitrotoluene [DNT], picric acid [PA]) was carried out using photoluminescent metallole-containing polymers. The method of detection is through the quenching of fluorescence of thin films of the polymer, prepared by spray coating organic solutions of the polymer, by the explosive analyte. Visual quenching of luminescence (lambda(em) approximately 400-510 nm) in the presence of the explosive is seen immediately upon illumination with near-UV light (lambda(ex)=360 nm). Detection limits were observed to be as low as 5 ng for TNT, 20 ng for DNT, and 5 ng for PA. In addition, experiments with normal production line explosives and their components show that this technology is also able to detect composition B, Pyrodex, and nitromethane. This method offers a convenient and sensitive method of detection of trace nitroaromatic explosive residue.

  7. 75 FR 43906 - Hazardous Materials: Requirements for the Storage of Explosives During Transportation

    Science.gov (United States)

    2010-07-27

    ... projected outward rockets and mass explosion hazard. at some distance. warheads. 1.3 Fire hazard and either... and no airbags, and projection of fragments of model rocket any appreciable size or motors. range is... Explosives (IME), Orica, USA, Science Applications International Corporation, Automotive Occupant Restraint...

  8. The science applications of the high-energy density plasmas created on the Nova laser

    Energy Technology Data Exchange (ETDEWEB)

    Rosen, M.D. [Lawrence Livermore National Laboratory, Livermore, California 94550 (United States)

    1996-05-01

    Since the late 1970s it has been realized that the laser-heated hohlraums envisioned for indirect drive Inertial Confinement Fusion (ICF) could also serve as {open_quote}{open_quote}physics factories{close_quote}{close_quote} by providing a high-energy density environment for the study of a wide variety of physics with important applications. In this review we will describe some of these studies, accomplished in the early 1990s using the Nova laser [J. T. Hunt and D. R. Speck, Opt. Eng. {bold 28}, 461 (1989)] at the Lawrence Livermore National Laboratory. They include measuring the opacity of Fe, thus confirming that the OPAL low {ital Z} opacity code [C. A. Iglesias and F. J. Rogers, Astrophys. J. {bold 443}, 460 (1995)] is quantitatively more accurate than {open_quote}{open_quote}standard{close_quote}{close_quote} models, with important astrophysical implications such as modeling the Cepheid variables [F. J. Rogers and C. A. Iglesias, Science {bold 263}, 50 (1994)]; measuring the Rosseland mean opacity of Au, confirming the correctness of the {open_quote}{open_quote}Super Transition Array{close_quote}{close_quote} (STA) high-{ital Z} code [Bar Shalom {ital et} {ital al}., Phys. Rev. A {bold 40}, 3183 (1989)] with important implications for ignition targets designed for the National Ignition Facility (NIF); sophisticated Rayleigh{endash}Taylor and other hydrodynamic turbulence experiments and analysis that serve as a test bed for understanding astrophysical observations such as supernova explosions; using laboratory x-ray lasers for probing high-density ICF plasmas as well as biology; and creating near Gbar pressures [Cauble {ital et} {ital al}. Phys. Rev. Lett. {bold 70}, 2102 (1993)]. Expanded opportunities for such research on the NIF will also be described. {copyright} {ital 1996 American Institute of Physics.}

  9. Molecular Outflows: Explosive versus Protostellar

    Energy Technology Data Exchange (ETDEWEB)

    Zapata, Luis A.; Rodríguez, Luis F.; Palau, Aina; Loinard, Laurent [Instituto de Radioastronomía y Astrofísica, UNAM, Apdo. Postal 3-72 (Xangari), 58089 Morelia, Michoacán, México (Mexico); Schmid-Burgk, Johannes [Max-Planck-Institut für Radioastronomie, Auf dem Hügel 69, D-53121, Bonn (Germany)

    2017-02-10

    With the recent recognition of a second, distinctive class of molecular outflows, namely the explosive ones not directly connected to the accretion–ejection process in star formation, a juxtaposition of the morphological and kinematic properties of both classes is warranted. By applying the same method used in Zapata et al., and using {sup 12}CO( J = 2-1) archival data from the Submillimeter Array, we contrast two well-known explosive objects, Orion KL and DR21, to HH 211 and DG Tau B, two flows representative of classical low-mass protostellar outflows. At the moment, there are only two well-established cases of explosive outflows, but with the full availability of ALMA we expect that more examples will be found in the near future. The main results are the largely different spatial distributions of the explosive flows, consisting of numerous narrow straight filament-like ejections with different orientations and in almost an isotropic configuration, the redshifted with respect to the blueshifted components of the flows (maximally separated in protostellar, largely overlapping in explosive outflows), the very-well-defined Hubble flow-like increase of velocity with distance from the origin in the explosive filaments versus the mostly non-organized CO velocity field in protostellar objects, and huge inequalities in mass, momentum, and energy of the two classes, at least for the case of low-mass flows. Finally, all the molecular filaments in the explosive outflows point back to approximately a central position (i.e., the place where its “exciting source” was located), contrary to the bulk of the molecular material within the protostellar outflows.

  10. Ultrasensitive optoelectronic sensors for nitrogen oxides and explosives detection

    Science.gov (United States)

    Wojtas, J.; Bielecki, Z.; Stacewicz, T.; Mikolajczyk, J.

    2013-01-01

    The article describes application of cavity enhanced absorption spectroscopy (CEAS) for detection of nitrogen oxides and vapours of explosives. The oxides are important greenhouse gases that are of large influence on environment, living organisms and human health. These compounds are also markers of some human diseases as well as they are emitted by commonly used explosives. Therefore sensitive nitrogen oxides sensors are of great importance for many applications, e. g. for environment protection (air monitoring), for medicine investigation (analyzing of exhaled air) and finally for explosives detection. In the Institute of Optoelectronics MUT different types of optoelectronic sensors employing CEAS were developed. They were designed to measure trace concentration of nitrogen dioxide, nitric oxide, and nitrous oxide. The sensors provide opportunity for simultaneous measurement of these gases concentration at ppb level. Their sensitivity is comparable with sensitivities of instruments based on other methods, e.g. gas chromatography or mass spectrometry. Our sensors were used for some explosives detection as well. The experiment showed that the sensors provide possibility to detect explosive devices consisting of nitroglycerine, ammonium nitrate, TNT, PETN, RDX and HMX.

  11. Some properties of explosive mixtures containing peroxides

    Energy Technology Data Exchange (ETDEWEB)

    Zeman, Svatopluk [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)], E-mail: svatopluk.zeman@upce.cz; Trzcinski, Waldemar A. [Institute of Chemistry, Military University of Technology, PL-00-908 Warsaw 49 (Poland); Matyas, Robert [Institute of Energetic Materials, Faculty of Chemical Technology, University of Pardubice, CZ-532 10 Pardubice (Czech Republic)

    2008-06-15

    This study concerns mixtures of triacetone triperoxide (3,3,6,6,9,9-hexamethyl-1,2,4,5,7,8-hexoxonane, TATP) and ammonium nitrate (AN) with added water (W), as the case may be, and dry mixtures of TATP with urea nitrate (UN). Relative performances (RP) of the mixtures and their individual components, relative to TNT, were determined by means of ballistic mortar. The detonation energies, E{sub 0}, and detonation velocities, D, were calculated for the mixtures studied by means of the thermodynamic code CHEETAH. Relationships have been found and are discussed between the RP and the E{sub 0} values related to unit volume of gaseous products of detonation of these mixtures. These relationships together with those between RP and oxygen balance values of the mixtures studied indicate different types of participation of AN and UN in the explosive decomposition of the respective mixtures. Dry TATP/UN mixtures exhibit lower RP than analogous mixtures TATP/AN containing up to 25% of water. Depending on the water content, the TATP/AN mixtures possess higher detonability values than the ANFO explosives. A semi-logarithmic relationship between the D values and oxygen coefficients has been derived for all the mixtures studied at the charge density of 1000 kg m{sup -3}. Among the mixtures studied, this relationship distinguishes several samples of the type of 'tertiary explosives' as well as samples that approach 'high explosives' in their performances and detonation velocities.

  12. Superconducting spoke cavities for high-velocity applications

    Energy Technology Data Exchange (ETDEWEB)

    Hopper, Christopher S. [Old Dominion U.; Delayen, Jean R. [Old Dominion U., JLAB

    2013-10-01

    To date, superconducting spoke cavities have been designed, developed, and tested for particle velocities up to {beta}{sub 0}~0.6, but there is a growing interest in possible applications of multispoke cavities for high-velocity applications. We have explored the design parameter space for low-frequency, high-velocity, double-spoke superconducting cavities in order to determine how each design parameter affects the electromagnetic properties, in particular the surface electromagnetic fields and the shunt impedance. We present detailed design for cavities operating at 325 and 352 MHz and optimized for {beta}{sub 0}~=0.82 and 1.

  13. Multispectral Observations of Explosive Gas Emissions from Santiaguito, Guatemala

    Science.gov (United States)

    Carn, S. A.; Watson, M.; Thomas, H.; Rodriguez, L. A.; Campion, R.; Prata, F. J.

    2016-12-01

    Santiaguito volcano, Guatemala, has been persistently active for decades, producing frequent explosions from its actively growing lava dome. Repeated release of volcanic gases contains information about conduit processes during the cyclical explosions at Santiaguito, but the composition of the gas phase and the amount of volatiles released in each explosion remains poorly constrained. In addition to its persistent activity, Santiaguito offers an exceptional opportunity to investigate lava dome degassing processes since the upper surface of the active lava dome can be viewed from the summit of neighboring Santa Maria. In January 2016 we conducted multi-spectral observations of Santiaguito's explosive eruption plumes and passive degassing from multiple perspectives as part of the first NSF-sponsored `Workshop on Volcanoes' instrument deployment. Gas measurements included open-path Fourier-Transform infrared (OP-FTIR) spectroscopy from the Santa Maria summit, coincident with ultraviolet (UV) and infrared (IR) camera and UV Differential Optical Absorption Spectroscopy (DOAS) from the El Mirador site below Santiaguito's active Caliente lava dome. Using the OP-FTIR in passive mode with the Caliente lava dome as the source of IR radiation, we were able to collect IR spectra at high temporal resolution prior to and during two explosions of Santiaguito on 7-8 January, with volcanic SO2 and H2O emissions detected. UV and IR camera data provide constraints on the total SO2 burden in the emissions (and potentially the volcanic ash burden), which coupled with the FTIR gas ratios provides new constraints on the mass and composition of volatiles driving explosions at Santiaguito. All gas measurements indicate significant volatile release during explosions with limited degassing during repose periods. In this presentation we will present ongoing analysis of the unique Santiaguito gas dataset including estimation of the total volatile mass released in explosions and an

  14. Classification of explosives transformation products in plant tissue

    Energy Technology Data Exchange (ETDEWEB)

    Larson, S.L.; Jones, R.P. (Army Corps of Engineers, Vicksburg, MI (United States). Waterways Experiment Station); Escalon, L.; Parker, D. (AScI Corp., McLean, VA (United States))

    1999-06-01

    Explosives contamination in surface or groundwater used for the irrigation of food crops and phytoremediation of explosives-contaminated soil or water using plant-assisted biodegradation have brought about concerns as to the fate of explosives in plants. Liquid scintillation counting, high-performance liquid chromatography, and gel permeation chromatography were utilized to characterize explosives (hexahydro-1,3,5-trinitro-1,3,5-triazine and trinitrotoluene) and their metabolites in plant tissues obtained from three separate studies. Analyzing tissues of yellow nutsedge (Cyperus esculentus), corn (Zea mays), lettuce (Lacuta sativa), tomato (Lyopersicum esculentum), radish (Raphanus sativus), and parrot feather (Myriophyllum aquaticum) from three studies where exposure to explosives at nontoxic levels occurred showed that extensive transformation of the explosive contaminant occurred, variations were noted in uptake and transformation between terrestrial and aquatic plants, the products had significantly higher polarity and water solubility than the parent compounds, and the molecular sizes of the transformation products were significantly greater than those of the parent compounds.

  15. Shock-induced explosive chemistry in a deterministic sample configuration.

    Energy Technology Data Exchange (ETDEWEB)

    Stuecker, John Nicholas; Castaneda, Jaime N.; Cesarano, Joseph, III (,; ); Trott, Wayne Merle; Baer, Melvin R.; Tappan, Alexander Smith

    2005-10-01

    Explosive initiation and energy release have been studied in two sample geometries designed to minimize stochastic behavior in shock-loading experiments. These sample concepts include a design with explosive material occupying the hole locations of a close-packed bed of inert spheres and a design that utilizes infiltration of a liquid explosive into a well-defined inert matrix. Wave profiles transmitted by these samples in gas-gun impact experiments have been characterized by both velocity interferometry diagnostics and three-dimensional numerical simulations. Highly organized wave structures associated with the characteristic length scales of the deterministic samples have been observed. Initiation and reaction growth in an inert matrix filled with sensitized nitromethane (a homogeneous explosive material) result in wave profiles similar to those observed with heterogeneous explosives. Comparison of experimental and numerical results indicates that energetic material studies in deterministic sample geometries can provide an important new tool for validation of models of energy release in numerical simulations of explosive initiation and performance.

  16. High Reliability, High Mix, Ultralow Volume Surface Mount Technology for Space Applications

    Science.gov (United States)

    Barela, P.; Bonner, K.; Cornford, S.; Wen, A.

    1995-01-01

    For the past two years, JPL has been working to introduce surface mount technology (SMT) for high reliability space applications. The thrust has centered around four research and development projects, the aim of which is to facilitate the use of SMT for designing, producing, inspecting, and quantifying surface mount printed wiring assemblies for ultralow volume, long life space applications. This paper explores the current approach being pursued at JPL and some of the problems peculiar to applying SMT to spacecraft applications.

  17. High Level Control Applications for SOLEIL Commissioning and Operation

    CERN Document Server

    Nadolski, Laurent S; Ho, Katy; Leclercq, Nicolas; Ounsy, Majid; Petit, Sylvain

    2005-01-01

    The SOLEIL control system, namely TANGO developed in collaboration with ESRF, is now mature and stable. TANGO has also been chosen now by several other laboratories. High-level control applications implemented in the control room for the storage ring, the two transfer lines, and the booster will be described in this paper. Three kinds of tools for commissioning are used. First the generic TANGO tools (alarms, simple graphical control applications), which allow us to control in a simple way any TANGO Device Server. Secondly a Matlab Middle Layer (adapted from ALS and SPEAR3): Matlab is fully interconnected with TANGO; it is used primarily for writing Physics control applications. Finally Globalscreen, a commercial SCADA software devoted for building operation applications has been selected (panels for controlling or displaying setpoint, readback values, status of equipments). In addition an overview of the historical and short-term databases for the accelerators will be given. They have been developed in house...

  18. Phase Equilibria Impetus For Large-Volume Explosive Volcanic Eruptions

    Science.gov (United States)

    Fowler, S. J.; Spera, F. J.; Bohrson, W. A.; Ghiorso, M. S.

    2006-12-01

    We have investigated the phase equilibria and associated variations in melt and magma thermodynamic and transport properties of seven large-volume silicic explosive volcanic systems through application of the MELTS (Ghiorso &Sack, 1995) algorithm. Each calculation is based on fractional crystallization along an oxygen buffer at low-pressure (0.1 - 0.3 GPa), starting from a mafic parental liquid. Site-specific geological constraints provide starting conditions for each system. We have performed calculations for seven tuffs; the Otowi (~400 km3) and Tshirege (~200 km3) members of the Bandelier Tuff, the ~600 km3 Bishop Tuff, and the 2500, 300, and 1000 km3 Yellowstone high-silica rhyolite tuffs. These represent the six largest eruptions within North America over the past ~2 million years. The seventh tuff, the 39.3 ka Campanian Ignimbrite, a 200 km3 trachytic to phonolitic ignimbrite located near Naples, Italy, is the largest explosive eruption in the Mediterranean area in the last 200 kyr. In all cases, MELTS faithfully tracks the liquid line of descent as well as the identity and composition of phenocrysts. The largest discrepancy between predicted and observed melt compositions is for CaO in all calculations. A key characteristic for each system is a pseudoinvariant temperature, Tinv, where abrupt shifts in crystallinity (1-fm, where fm is the fraction of melt), volume fraction of supercritical fluid (θ), magma compressibility, melt and magma density, and viscosity occur over a small temperature interval of order 1 - 10 K. In particular, the volume fraction of vapor increases from θ ~0.1 just below Tinv to θ >0.7 just above Tinv for each case. The rheological transition between melt-dominated (high viscosity) and bubble-dominated (low viscosity) magma occurs at θ ~0.6. We emphasize that this effect is observed under isobaric conditions and is distinct from the oft-studied phenomenon of volatile exsolution accompanying magma decompression and subsequent

  19. An examination of the spatial distribution of the tissue fragments created during a single explosive attack.

    Science.gov (United States)

    DuBois, E; Bowers, K; Rando, C

    2017-10-01

    Throughout the course of a forensic investigation following an explosive attack, the identification and recovery of tissue fragments is of extreme importance. There are few universally accepted methods to achieve this end. This project aims to explore this issue through the examination of the spatial distribution of the tissue fragments resulting from an explosive event. To address this, a two stage pilot study was conducted: first, a series of controlled explosions on porcine carcases was undertaken. Second, the data produced from these explosions were used to chart the spatial distribution of the tissue debris. In the controlled explosions, 3kg military grade explosive was chosen to create the maximum amount of fragmentation; this level of explosive also prevented the complete disappearance of forensic evidence through evaporation. Additionally, the blast created by military grade explosive is highly powerful and would mean that the maximum possible distance was achieved and would therefore allow the recorded distances and pattern spread to be a guideline for forensic recovery of associated with an explosive amount of an unknown size and quality. A total station was employed to record the location of the resulting forensic evidence, with the collected data analysed using R Studio. The observed patterns suggested that the distribution of remains is fairly consistent in trials under similar environmental conditions. This indicates potential for some general guidelines for forensic evidence collection (for example, the distance from the explosion that a search should cover). Copyright © 2017 The Authors. Published by Elsevier B.V. All rights reserved.

  20. A Lemon Cell Battery for High-Power Applications

    Science.gov (United States)

    Muske, Kenneth R.; Nigh, Christopher W.; Weinstein, Randy D.

    2007-04-01

    This article discusses the development of a lemon cell battery for high-power applications. The target application is the power source of a dc electric motor for a model car constructed by first-year engineering students as part of their introductory course design project and competition. The battery is composed of a series of lemon juice cells made from UV vis cuvets that use a magnesium anode and copper cathode. Dilution of the lemon juice to reduce the rate of corrosion of the magnesium anode and the addition of table salt to reduce the internal resistance of the cell are examined. Although our specific interest is the use of this lemon cell battery to run an electric dc motor, high-power applications such as radios, portable cassette or CD players, and other battery-powered toys are equally appropriate for demonstration and laboratory purposes using this battery.

  1. Potential high efficiency solar cells: Applications from space photovoltaic research

    Science.gov (United States)

    Flood, D. J.

    1986-01-01

    NASA involvement in photovoltaic energy conversion research development and applications spans over two decades of continuous progress. Solar cell research and development programs conducted by the Lewis Research Center's Photovoltaic Branch have produced a sound technology base not only for the space program, but for terrestrial applications as well. The fundamental goals which have guided the NASA photovoltaic program are to improve the efficiency and lifetime, and to reduce the mass and cost of photovoltaic energy conversion devices and arrays for use in space. The major efforts in the current Lewis program are on high efficiency, single crystal GaAs planar and concentrator cells, radiation hard InP cells, and superlattice solar cells. A brief historical perspective of accomplishments in high efficiency space solar cells will be given, and current work in all of the above categories will be described. The applicability of space cell research and technology to terrestrial photovoltaics will be discussed.

  2. RCRA Part A Permit Application for Waste Management Activities at the Nevada Test Site, Part B Permit Application Hazardous Waste Storage Unit, Nevada Test Site, and Part B Permit Application - Explosives Ordnance Disposal Unit (EODU)

    Energy Technology Data Exchange (ETDEWEB)

    NSTec Environmental Programs

    2010-06-17

    The Area 5 Hazardous Waste Storage Unit (HWSU) was established to support testing, research, and remediation activities at the Nevada Test Site (NTS), a large-quantity generator of hazardous waste. The HWSU, located adjacent to the Area 5 Radioactive Waste Management Site (RWMS), is a prefabricated, rigid steel-framed, roofed shelter used to store hazardous nonradioactive waste generated on the NTS. No offsite generated wastes are managed at the HWSU. Waste managed at the HWSU includes the following categories: Flammables/Combustibles; Acid Corrosives; Alkali Corrosives; Oxidizers/Reactives; Toxics/Poisons; and Other Regulated Materials (ORMs). A list of the regulated waste codes accepted for storage at the HWSU is provided in Section B.2. Hazardous wastes stored at the HWSU are stored in U.S. Department of Transportation (DOT) compliant containers, compatible with the stored waste. Waste transfer (between containers) is not allowed at the HWSU and containers remain closed at all times. Containers are stored on secondary containment pallets and the unit is inspected monthly. Table 1 provides the metric conversion factors used in this application. Table 2 provides a list of existing permits. Table 3 lists operational Resource Conservation and Recovery Act (RCRA) units at the NTS and their respective regulatory status.

  3. SiC device development for high temperature sensor applications

    Science.gov (United States)

    Shor, J. S.; Goldstein, David; Kurtz, A. D.; Osgood, R. M.

    1992-01-01

    Progress made in the processing and characterization of 3C-SiC for high temperature sensor applications is reviewed. Piezoresistance properties of silicon carbide and the temperature coefficient of resistivity of n-type beta-SiC are presented. In addition, photoelectrical etching and dopant selective etch-stops in SiC and high temperature Ohmic contacts for n-type beta-SiC sensors are discussed.

  4. Behavioural and Genetic Evidence for C. elegans' Ability to Detect Volatile Chemicals Associated with Explosives

    OpenAIRE

    Chunyan Liao; Andrew Gock; Michelle Michie; Bethany Morton; Alisha Anderson; Stephen Trowell

    2010-01-01

    BACKGROUND: Automated standoff detection and classification of explosives based on their characteristic vapours would be highly desirable. Biologically derived odorant receptors have potential as the explosive recognition element in novel biosensors. Caenorhabditis elegans' genome contains over 1,000 uncharacterised candidate chemosensory receptors. It was not known whether any of these respond to volatile chemicals derived from or associated with explosives. METHODOLOGY/PRINCIPAL FINDINGS: W...

  5. Bladder Explosion during Transurethral Resection of the Prostate with Nitrous Oxide Inhalation

    Science.gov (United States)

    Hirai, Eiko; Lefor, Alan Kawarai; Ogura, Shinobu; Kawamata, Miwako

    2015-01-01

    Bladder explosions are a rare complication of transurethral resection of the prostate. We report a patient who suffered a bladder rupture following transurethral resection of the prostate. Although explosive gases accumulate during the procedure, a high concentration of oxygen is needed to support an explosion. This rare phenomenon can be prevented by preventing the flow of room air into the bladder during the procedure to maintain a low concentration of oxygen inside the bladder. PMID:26294981

  6. Explosive strength training improves speed and agility in wheelchair basketball athletes

    OpenAIRE

    Ozmen,Tarik; Yuktasir,Bekir; Yildirim,Necmiye Un; Yalcin,Birol; Willems,Mark ET

    2014-01-01

    INTRODUCTION: Wheelchair basketball is a paralympic sport characterized by intermittent high-intensity activities that require explosive strength and speed. OBJECTIVE: To investigate the effect of explosive strength training on speed and agility performance in wheelchair basketball players. METHODS: Ten male wheelchair basketball players (Mage=31±4 yrs) were divided into two groups [i.e. explosive strength training (ES); control (CN)] based on International Wheelchair Basketball Fede...

  7. Applications of NAA at Institute of High Energy Physics

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Zhiyong; Chai Zhifang [Chinese Academy of Sciences, Institute of High Energy Physics, Beijing (China)

    2003-03-01

    Recent achievements in application studies of neutron activation analysis (NAA) at Institute of High Energy Physics, The Chinese Academy of Sciences are briefly described. A small number of selected areas and problems, particularly in life sciences, are highlighted because they present challenges for NAA and its prospects in the future. (author)

  8. Circular Piezoelectric Accelerometer for High Band Width Application

    DEFF Research Database (Denmark)

    Hindrichsen, Christian Carstensen; Larsen, Jack; Lou-Møller, Rasmus

    2009-01-01

    An uniaxial bulk-micromachined piezoelectric MEMS accelerometer intended for high bandwidth application is fabricated and characterized. A circular seismic mass (radius = 1200 ¿m) is suspended by a 20 ¿m thick annular silicon membrane (radius = 1800 ¿m). A 24 ¿m PZT screen printed thick film...

  9. Late-season nitrogen applications in high-latitude strawberry ...

    African Journals Online (AJOL)

    USER

    2010-02-15

    Feb 15, 2010 ... The influence of late-season nitrogen (N) applications on the fruiting pattern of strawberry runner plants of 'Camarosa' was determined over three growing seasons. Experiments were carried out in high- latitude nurseries in northern California and fruit production trials were established in southern.

  10. High School Students' Knowledge and Attitudes regarding Biotechnology Applications

    Science.gov (United States)

    Ozel, Murat; Erdogan, Mehmet; Usak, Muhammet; Prokop, Pavol

    2009-01-01

    The purpose of this study was to investigate high school students' knowledge and attitudes regarding biotechnology and its various applications. In addition, whether students' knowledge and attitudes differed according to age and gender were also explored. The Biotechnology Knowledge Questionnaire (BKQ) with 16 items and the Biotechnology Attitude…

  11. High efficiency solar cells for laser power beaming applications

    Science.gov (United States)

    Jain, Raj K.; Landis, G. A.

    1995-01-01

    Understanding solar cell response to pulsed laser outputs is important for the evaluation of power beaming applications. The time response of high efficiency GaAs and silicon solar cells to a 25 nS monochromatic pulse input is described. The PC-1D computer code is used to analyze the cell current during and after the pulse for various conditions.

  12. SAFT Li-ion Technology for High Rate Applications

    National Research Council Canada - National Science Library

    Nechev, Kamen; Deveney, Bridget; Guseynov, Teymur; Erbacher, John; Vukson, Stephen

    2006-01-01

    SAFT will present an update of its state-of-the art Very High Power (VHP) Lithium-ion (Li-ion) technology. The VHP cells are currently being qualified for use in military aircraft applications as well as in future military hybrid vehicles...

  13. Highly stressed carbon film coatings on silicon potential applications

    CERN Multimedia

    Sharda, T

    2002-01-01

    The fabrication of highly stressed and strongly adhered nanocrystalline diamond films on Si substrates is presented. A microwave plasma CVD method with controlled and continuous bias current density was used to grow the films. The stress/curvature of the films can be varied and controlled by altering the BCD. Potential applications for these films include particle physics and x-ray optics.

  14. Thickened aqueous slurry explosive composition

    Energy Technology Data Exchange (ETDEWEB)

    Craig, J.F.M.; Matts, T.C.; Seto, P.F.L.

    1979-01-04

    A thickened slurry explosive composition consists of water, inorganic oxidizing salt, fuel, and thickener wherein the thickener is a mixture of an unmodified guar gum and a hydroxypropyl-modified guar gum. The thickener mixture improves the stability and rheologic properties of the explosive. The preferred thickener mixture contains from 15 to 85% by weight of unmodified guar to 15 to 85% by weight of hydroxypropyl-modified guar and the composition preferably comprises 0.2% to 2.0% by weight of the thickener mixture. The thickener mixture is especially effective in explosive compositions sensitized with gas bubbles or with water-soluble organic nitrate for example, ethylene glycol mononitrate, propylene glycol mononitrate, ethanolamine nitrate, propanolamine nitrate, methylamine nitrate, ethylamine nitrate, ethylenediamine dinitrate, urea nitrate, or aniline nitrate. 14 claims.

  15. Optimal dynamic detection of explosives

    Energy Technology Data Exchange (ETDEWEB)

    Moore, David Steven [Los Alamos National Laboratory; Mcgrane, Shawn D [Los Alamos National Laboratory; Greenfield, Margo T [Los Alamos National Laboratory; Scharff, R J [Los Alamos National Laboratory; Rabitz, Herschel A [PRINCETON UNIV; Roslund, J [PRINCETON UNIV

    2009-01-01

    The detection of explosives is a notoriously difficult problem, especially at stand-off distances, due to their (generally) low vapor pressure, environmental and matrix interferences, and packaging. We are exploring optimal dynamic detection to exploit the best capabilities of recent advances in laser technology and recent discoveries in optimal shaping of laser pulses for control of molecular processes to significantly enhance the standoff detection of explosives. The core of the ODD-Ex technique is the introduction of optimally shaped laser pulses to simultaneously enhance sensitivity of explosives signatures while reducing the influence of noise and the signals from background interferents in the field (increase selectivity). These goals are being addressed by operating in an optimal nonlinear fashion, typically with a single shaped laser pulse inherently containing within it coherently locked control and probe sub-pulses. With sufficient bandwidth, the technique is capable of intrinsically providing orthogonal broad spectral information for data fusion, all from a single optimal pulse.

  16. Inkjet printing lanthanide doped nanorods test paper for visual assays of nitroaromatic explosives

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Liang [Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026 (China); Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Mei, Qingsong [Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Yang, Lei [Department of Chemical Physics, University of Science and Technology of China, Hefei, Anhui 230026 (China); Zhang, Cheng; Liu, Renyong [Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Han, Mingyong, E-mail: my-han@imre.a-star.edu.sg [Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); ASTAR, Inst Mat Res and Engn, Singapore 117602 (Singapore); Zhang, Ruilong [Department of Materials Science and Engineering, University of Science and Technology of China, Hefei, Anhui 230026 (China); Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China); Zhang, Zhongping, E-mail: zpzhang@iim.ac.cn [Institute of Intelligent Machines, Chinese Academy of Sciences, Hefei, Anhui 230031 (China)

    2013-11-13

    Graphical abstract: -- Highlights: •A test paper was used for visualization of explosive 2,4,6-trinitrophenol (TNP) by the naked eye. •TNP can strongly quench the phosphorescence of NaGdF{sub 4}:Ce/Tb nanorods. •Polyethylenimine (PEI) molecules facilitate the formation of uniform NaGdF{sub 4} nanorods. •PEI molecules provide specific recognized sites for TNP by the acid–base pairing interaction. -- Abstract: The facile and sensitive strategies for detections of nitroaromatic explosives are highly desirable in many challenging environments, especially for homeland security against terrorism. Here, we inkjet printed polyethylenimine (PEI)-coated Ce, Tb co-doped NaGdF{sub 4} nanorods (NaGdF{sub 4}:Ce/Tb NRs) onto common filter paper to construct test paper for visual and instant detections of a typical explosive 2,4,6-trinitrophenol (TNP). Polyethylenimine molecules not only facilitate the formation of uniform NaGdF{sub 4} nanorods but also provide specific recognized sites for TNP by the acid–base pairing interaction. The resultant TNP bound at the surface of PEI-coated NaGdF{sub 4}:Ce/Tb NRs can strongly quench the phosphorescence with a remarkably high quenching constant by the charge transfer mechanism from NaGdF{sub 4}:Ce/Tb NRs to TNP. By printing of the probe on a piece of filter paper, trace amounts of TNP can be visually detected by the appearance of a dark color against a bright green background under a UV lamp. This test paper can detect TNP as low as 0.45 ng mm{sup −2} by the naked eye, which provides a potential application in the rapid, on-line detections of explosives.

  17. High Power Density and High Temperature Converter Design for Transportation Applications

    OpenAIRE

    Wang, Ruxi

    2012-01-01

    The continual development of high-power-density power electronic converters is driven particularly by modern transportation applications like electrical vehicles and more electric aircraft where the space and carrier capability is limited. However, there are several challenges related to transportation applications such as fault tolerance for safety concern, high temperature operation in extreme environments and more strict electromagnetic compatibility requirement. These challenges will incr...

  18. Algorithm describing pressure distribution of non-contact TNT explosion

    Directory of Open Access Journals (Sweden)

    Radosław Kiciński

    2014-12-01

    Full Text Available [b]Abstract[/b]. The aim of this study is to develop a computational algorithm, describing the shock wave pressure distribution in the space induced by non-contact TNT explosion. The procedure describes pressure distribution on a damp surface of the hull. Simulations have been carried out using Abaqus/CAE. The study also shows the pressure waveform descriptions provided by various authors and presents them in charts. The formulated conclusions convince efficiency of the algorithm application.[b]Keywords:[/b] Underwater explosion, shock wave, CAE, TNT, Kobben class submarine

  19. Experiments in gasdynamics of explosions.

    Science.gov (United States)

    Oppenheim, A. K.; Soloukhin, R. I.

    1973-01-01

    Various topics concerning recent accomplishments in experimental studies of gasdynamics of explosions are reviewed. Detonations, shocks, and blast waves form these topics. The most important feature of current studies is the particular attention paid to transient processes and the concomitant progress made in the development of novel experimental means for the study of such processes. The most exciting prospects for the future are associated with possibilities of exploiting knowledge of explosion phenomena for the development of such interesting devices as the gasdynamic laser and the apparatus based on the use of lasers to achieve controlled thermonuclear reaction.

  20. Intravesical explosion during transurethral electrosurgery.

    Science.gov (United States)

    Georgios, Kallinikas; Evangelos, Boulinakis; Helai, Habib; Ioannis, Gerzelis

    2015-05-01

    Intravesical explosion is a very rare complication of transurethral resection of prostate and transurethral resection of bladder tumour operations. In vitro studies have shown that the gases produced during the procedure could result in a blast once they are mixed with air from the atmosphere. A 79-year-old male experienced an explosion in his bladder while undergoing a transurethral resection of bladder tumour. The case is presented as well as the way that it was treated as an emergency. Precautions of such events are finally suggested. © The Author(s) 2015 Reprints and permissions: sagepub.co.uk/journalsPermissions.nav.