WorldWideScience

Sample records for high cell concentrations

  1. Review of silicon solar cells for high concentrations

    Science.gov (United States)

    Schwartz, R. J.

    1982-06-01

    The factors that limit the performance of high concentration silicon solar cells are reviewed. The design of a conventional high concentration cell is discussed, together with the present state of the art. Unconventional cell designs that have been proposed to overcome the limitations of the conventional design are reviewed and compared. The current status of unconventional cells is reviewed. Among the unconventional cells discussed are the interdigitated back-contact cell, the double-sided cell, the polka dot cell, and the V-groove cell. It is noted that all the designs for unconventional cells require long diffusion lengths for high efficiency operation, even though the demands in this respect are less for those cells with the optical path longer than the diffusion path.

  2. Bandgap Engineering in High-Efficiency Multijunction Concentrator Cells

    Energy Technology Data Exchange (ETDEWEB)

    King, R. R.; Sherif, R. A.; Kinsey, G. S.; Kurtz, S.; Fetzer, C. M.; Edmondson, K. M.; Law, D. C.; Cotal, H. L.; Krut, D. D.; Ermer, J. H.; Karam, N. H.

    2005-08-01

    This paper discusses semiconductor device research paths under investigation with the aim of reaching the milestone efficiency of 40%. A cost analysis shows that achieving very high cell efficiencies is crucial for the realization of cost-effective photovoltaics, because of the strongly leveraging effect of efficiency on module packaging and balance-of systems costs. Lattice-matched (LM) GaInP/ GaInAs/ Ge 3-junction cells have achieved the highest independently confirmed efficiency at 175 suns, 25?C, of 37.3% under the standard AM1.5D, low-AOD terrestrial spectrum. Lattice-mismatched, or metamorphic (MM), materials offer still higher potential efficiencies, if the crystal quality can be maintained. Theoretical efficiencies well over 50% are possible for a MM GaInP/ 1.17-eV GaInAs/ Ge 3-junction cell limited by radiative recombination at 500 suns. The bandgap - open circuit voltage offset, (Eg/q) - Voc, is used as a valuable theoretical and experimental tool to characterize multijunction cells with subcell bandgaps ranging from 0.7 to 2.1 eV. Experimental results are presented for prototype 6-junction cells employing an active {approx}1.1-eV dilute nitride GaInNAs subcell, with active-area efficiency greater than 23% and over 5.3 V open-circuit voltage under the 1-sun AM0 space spectrum. Such cell designs have theoretical efficiencies under the terrestrial spectrum at 500 suns concentration exceeding 55% efficiency, even for lattice-matched designs.

  3. Development of manufacturing capability for high-concentration, high-efficiency silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Sinton, R.A.; Verlinden, P.J.; Crane, R.A.; Swanson, R.N. [SunPower Corp., Sunnyvale, CA (United States)

    1996-10-01

    This report presents a summary of the major results from a program to develop a manufacturable, high-efficiency silicon concentrator solar cell and a cost-effective manufacturing facility. The program was jointly funded by the Electric Power Research Institute, Sandia National Laboratories through the Concentrator Initiative, and SunPower Corporation. The key achievements of the program include the demonstration of 26%-efficient silicon concentrator solar cells with design-point (20 W/cm{sup 2}) efficiencies over 25%. High-performance front-surface passivations; that were developed to achieve this result were verified to be absolutely stable against degradation by 475 days of field exposure at twice the design concentration. SunPower demonstrated pilot production of more than 1500 of these cells. This cell technology was also applied to pilot production to supply 7000 17.7-cm{sup 2} one-sun cells (3500 yielded wafers) that demonstrated exceptional quality control. The average efficiency of 21.3% for these cells approaches the peak efficiency ever demonstrated for a single small laboratory cell within 2% (absolute). Extensive cost models were developed through this program and calibrated by the pilot-production project. The production levels achieved indicate that SunPower could produce 7-10 MW of concentrator cells per year in the current facility based upon the cell performance demonstrated during the program.

  4. Design requirements for high-efficiency high concentration ratio space solar cells

    Science.gov (United States)

    Rauschenbach, H.; Patterson, R.

    1980-01-01

    A miniaturized Cassegrainian concentrator system concept was developed for low cost, multikilowatt space solar arrays. The system imposes some requirements on solar cells which are new and different from those imposed for conventional applications. The solar cells require a circular active area of approximately 4 mm in diameter. High reliability contacts are required on both front and back surfaces. The back area must be metallurgically bonded to a heat sink. The cell should be designed to achieve the highest practical efficiency at 100 AMO suns and at 80 C. The cell design must minimize losses due to nonuniform illumination intensity and nonnormal light incidence. The primary radiation concern is the omnidirectional proton environment.

  5. Carbon Nanofibers Modified Graphite Felt for High Performance Anode in High Substrate Concentration Microbial Fuel Cells

    Directory of Open Access Journals (Sweden)

    Youliang Shen

    2014-01-01

    Full Text Available Carbon nanofibers modified graphite fibers (CNFs/GF composite electrode was prepared for anode in high substrate concentration microbial fuel cells. Electrochemical tests showed that the CNFs/GF anode generated a peak current density of 2.42 mA cm−2 at a low acetate concentration of 20 mM, which was 54% higher than that from bare GF. Increase of the acetate concentration to 80 mM, in which the peak current density of the CNFs/GF anode greatly increased and was up to 3.57 mA cm−2, was seven times as that of GF anode. Morphology characterization revealed that the biofilms in the CNFs/GF anode were much denser than those in the bare GF. This result revealed that the nanostructure in the anode not only enhanced current generation but also could tolerate high substrate concentration.

  6. High Concentrating GaAs Cell Operation Using Optical Waveguide Solar Energy System

    Science.gov (United States)

    Nakamura, T.; Case, J. A.; Timmons, M. L.

    2004-01-01

    This paper discusses the result of the concentrating photovoltaic (CPV) cell experiments conducted with the Optical Waveguide (OW) Solar Energy System. The high concentration GaAs cells developed by Research Triangle Institute (RTI) were combined with the OW system in a "fiber-on-cell" configuration. The sell performance was tested up to the solar concentration of 327. Detailed V-I characteristics, power density and efficiency data were collected. It was shown that the CPV cells combined with the OW solar energy system will be an effective electric power generation device.

  7. Vasopressin activates Akt/mTOR pathway in smooth muscle cells cultured in high glucose concentration

    Energy Technology Data Exchange (ETDEWEB)

    Montes, Daniela K.; Brenet, Marianne; Muñoz, Vanessa C.; Burgos, Patricia V.; Villanueva, Carolina I. [Department of Physiology, Universidad Austral de Chile, Valdivia 509-9200 (Chile); Figueroa, Carlos D. [Department of Anatomy, Histology and Pathology, Universidad Austral de Chile, Valdivia 509-9200 (Chile); González, Carlos B., E-mail: cbgonzal@uach.cl [Department of Physiology, Universidad Austral de Chile, Valdivia 509-9200 (Chile); Department of Neuroscience and Cell Biology, University of Texas Medical Branch, Galveston, TX 77555 (United States)

    2013-11-29

    Highlights: •AVP induces mTOR phosphorylation in A-10 cells cultured in high glucose concentration. •The mTOR phosphorylation is mediated by the PI3K/Akt pathway activation. •The AVP-induced mTOR phosphorylation inhibited autophagy and stimulated cell proliferation. -- Abstract: Mammalian target of rapamycin (mTOR) complex is a key regulator of autophagy, cell growth and proliferation. Here, we studied the effects of arginine vasopressin (AVP) on mTOR activation in vascular smooth muscle cells cultured in high glucose concentration. AVP induced the mTOR phosphorylation in A-10 cells grown in high glucose, in contrast to cells cultured in normal glucose; wherein, only basal phosphorylation was observed. The AVP-induced mTOR phosphorylation was inhibited by a PI3K inhibitor. Moreover, the AVP-induced mTOR activation inhibited autophagy and increased thymidine incorporation in cells grown in high glucose. This increase was abolished by rapamycin which inhibits the mTORC1 complex formation. Our results suggest that AVP stimulates mTOR phosphorylation by activating the PI3K/Akt signaling pathway and, subsequently, inhibits autophagy and raises cell proliferation in A-10 cells maintained in high glucose concentration.

  8. Apoptosis Induced by High Concentrations of Nicotinamide in Tobacco Suspension Cells

    Institute of Scientific and Technical Information of China (English)

    张贵友; 朱瑞宇; 戴尧仁

    2004-01-01

    As an inhibitor of poly(ADP-ribose) polymerase (PARP), nicotinamide has a restraining effect on apoptosis at certain low concentrations. In our present study, apoptosis induced by high concentrations of nicotinamide was observed in tobacco suspension cells. When cells were preincubated with 250 mmol/L nicotinamide for 24 h, the hallmarks of apoptosis were detected, including DNA fragments increasing in size by multiples of 180-200 bp, the condensation and peripheral distribution of nuclear chromatin, and a positive reaction to the TUNEL assay. At the same time, the degradation of PARP and the reduction in the potential of the inner membrane of mitochondria appeared in apoptotic cells induced by high concentrations of nicotinamide. This result indicates that apoptosis induced by high concentrations of nicotinamide is associated with caspase-3-like activity and with the opening of mitochondrial permeability pores. These results partially support the hypothesis that high concentrations of PARP inhibitor could force cells to enter an apoptotic pathway by delay of DNA repair in replicating cells.

  9. Lower Salinomycin Concentration Increases Apoptotic Detachment in High-Density Cancer Cells

    Directory of Open Access Journals (Sweden)

    Sungpil Yoon

    2012-10-01

    Full Text Available The present study identified a novel salinomycin (Sal sensitization mechanism in cancer. We tested whether Sal reduced proliferation in a high-density population by counting attached cell numbers after Sal treatment. Sal reduced proliferation in high-density cell populations. Longer exposure to Sal further reduced proliferation. Sal concentrations of 0.1 and 5 μM had similar sensitization effects, suggesting that Sal toxicity was minimal with longer exposure to a high-density cell population. The results suggest that Sal can be applied at a relatively low concentration for a longer time to overcome drug-resistant solid tumors. The 0.5 μM Sal treatment resulted in fewer attached cells than that of the 5 μM Sal treatment with a longer exposure. The lower Sal concentration mainly increased the number of easily detachable cells on the surface. In particular, 0.5 μM Sal increased cellular detachment of newly produced daughter cells. The easily-detachable cells were undergoing apoptosis. It seems that the 0.5 μM Sal treatment also increased cellular toxicity. These novel findings may contribute to the development of Sal-based therapy for patients with drug-resistant cancer or a high-density solid tumor.

  10. A SIMPLE WAY OF ACHIEVING A HIGH CELL CONCENTRATION IN RECOMBINANT Escherichia coli CULTIVATION

    Directory of Open Access Journals (Sweden)

    Gombert A.K.

    1997-01-01

    Full Text Available Abstract - A cultivation strategy based on some previous knowledge of the metabolism of Escherichia coli BL21 (DE3 pLysS containing the troponin C gene cloned into plasmid pET was developed and applied through the use of simple fermentation equipment and a feed-forward control strategy in order to achieve a high cell concentration ¾ 92 g l-1 dry cell weight ¾ and a high cell productivity ¾ 3.7 g l-1 h-1.

  11. The Effects of High Concentrations of Vitamin C on Cancer Cells

    Directory of Open Access Journals (Sweden)

    Seyeon Park

    2013-09-01

    Full Text Available The effect of high doses of vitamin C for the treatment of cancer has been controversial. Our previous studies, and studies by others, have reported that vitamin C at concentrations of 0.25–1.0 mM induced a dose- and time-dependent inhibition of proliferation in acute myeloid leukemia (AML cell lines and in leukemic cells from peripheral blood specimens obtained from patients with AML. Treatment of cells with high doses of vitamin C resulted in an immediate increase in intracellular total glutathione content and glutathione-S transferase activity that was accompanied by the uptake of cysteine. These results suggest a new role for high concentrations of vitamin C in modulation of intracellular sulfur containing compounds, such as glutathione and cysteine. This review, discussing biochemical pharmacologic studies, including pharmacogenomic and pharmacoproteomic studies, presents the different pharmacological effects of vitamin C currently under investigation.

  12. Spectral and Concentration Sensitivity of Multijunction Solar Cells at High Temperature: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Friedman, Daniel J.; Steiner, Myles A.; Perl, Emmett E.; Simon, John

    2017-06-14

    We model the performance of two-junction solar cells at very high temperatures of ~400 degrees C and beyond for applications such as hybrid PV/solar-thermal power production, and identify areas in which the design and performance characteristics behave significantly differently than at more conventional near-room-temperature operating conditions. We show that high-temperature operation reduces the sensitivity of the cell efficiency to spectral content, but increases the sensitivity to concentration, both of which have implications for energy yield in terrestrial PV applications. For other high-temperature applications such as near-sun space missions, our findings indicate that concentration may be a useful tool to enhance cell efficiency.

  13. High content analysis at single cell level identifies different cellular responses dependent on nanomaterial concentrations.

    Science.gov (United States)

    Manshian, Bella B; Munck, Sebastian; Agostinis, Patrizia; Himmelreich, Uwe; Soenen, Stefaan J

    2015-09-08

    A mechanistic understanding of nanomaterial (NM) interaction with biological environments is pivotal for the safe transition from basic science to applied nanomedicine. NM exposure results in varying levels of internalized NM in different neighboring cells, due to variances in cell size, cell cycle phase and NM agglomeration. Using high-content analysis, we investigated the cytotoxic effects of fluorescent quantum dots on cultured cells, where all effects were correlated with the concentration of NMs at the single cell level. Upon binning the single cell data into different categories related to NM concentration, this study demonstrates, for the first time, that quantum dots activate both cytoprotective and cytotoxic mechanisms, resulting in a zero net result on the overall cell population, yet with significant effects in cells with higher cellular NM levels. Our results suggest that future NM cytotoxicity studies should correlate NM toxicity with cellular NM numbers on the single cell level, as conflicting mechanisms in particular cell subpopulations are commonly overlooked using classical toxicological methods.

  14. High content analysis at single cell level identifies different cellular responses dependent on nanomaterial concentrations

    Science.gov (United States)

    Manshian, Bella B.; Munck, Sebastian; Agostinis, Patrizia; Himmelreich, Uwe; Soenen, Stefaan J.

    2015-09-01

    A mechanistic understanding of nanomaterial (NM) interaction with biological environments is pivotal for the safe transition from basic science to applied nanomedicine. NM exposure results in varying levels of internalized NM in different neighboring cells, due to variances in cell size, cell cycle phase and NM agglomeration. Using high-content analysis, we investigated the cytotoxic effects of fluorescent quantum dots on cultured cells, where all effects were correlated with the concentration of NMs at the single cell level. Upon binning the single cell data into different categories related to NM concentration, this study demonstrates, for the first time, that quantum dots activate both cytoprotective and cytotoxic mechanisms, resulting in a zero net result on the overall cell population, yet with significant effects in cells with higher cellular NM levels. Our results suggest that future NM cytotoxicity studies should correlate NM toxicity with cellular NM numbers on the single cell level, as conflicting mechanisms in particular cell subpopulations are commonly overlooked using classical toxicological methods.

  15. Graded Carrier Concentration Absorber Profile for High Efficiency CIGS Solar Cells

    Directory of Open Access Journals (Sweden)

    Antonino Parisi

    2015-01-01

    Full Text Available We demonstrate an innovative CIGS-based solar cells model with a graded doping concentration absorber profile, capable of achieving high efficiency values. In detail, we start with an in-depth discussion concerning the parametrical study of conventional CIGS solar cells structures. We have used the wxAMPS software in order to numerically simulate cell electrical behaviour. By means of simulations, we have studied the variation of relevant physical and chemical parameters—characteristic of such devices—with changing energy gap and doping density of the absorber layer. Our results show that, in uniform CIGS cell, the efficiency, the open circuit voltage, and short circuit current heavily depend on CIGS band gap. Our numerical analysis highlights that the band gap value of 1.40 eV is optimal, but both the presence of Molybdenum back contact and the high carrier recombination near the junction noticeably reduce the crucial electrical parameters. For the above-mentioned reasons, we have demonstrated that the efficiency obtained by conventional CIGS cells is lower if compared to the values reached by our proposed graded carrier concentration profile structures (up to 21%.

  16. Exposure to High Glucose Concentration Decreases Cell Surface ABCA1 and HDL Biogenesis in Hepatocytes.

    Science.gov (United States)

    Tsujita, Maki; Hossain, Mohammad Anwar; Lu, Rui; Tsuboi, Tomoe; Okumura-Noji, Kuniko; Yokoyama, Shinji

    2017-04-19

    To study atherosclerosis risk in diabetes, we investigated ATP-binding cassette transporter A1 (ABCA1) expression and high-density lipoprotein (HDL) biogenesis in the liver and hepatocytes under hyperglycemic conditions. In streptozotocin-induced diabetic mice, plasma HDL decreased while ABCA1 protein increased without changing its mRNA in the liver, only in the animals that responded to the treatment to show hypoinsulinemia and fasting hyperglycemia but not in the poor responders not showing those. To study the mechanism for this finding, hepatocytes were isolated from the control and diabetic mice, and they showed no difference in expression of ABCA1 protein, its mRNA, and HDL biogenesis in 1 g/l d-glucose but showed decreased HDL biogenesis in 4.5 g/l d-glucose although ABCA1 protein increased without change in its mRNA. Similar findings were confirmed in HepG2 cells with d-glucose but not with l-glucose. Thus, these cell models reproduced the in vivo findings in hyperglycemia. Labeling of cell surface protein revealed that surface ABCA1 decreased in high concentration of d-glucose in HepG2 cells despite the increase of cellular ABCA1 while not with l-glucose. Immunostaining of ABCA1 in HepG2 cells demonstrated the decrease of surface ABCA1 but increase of intracellular ABCA1 with high d-glucose. Clearance of ABCA1 was retarded both in primary hepatocytes and HepG2 cells exposed to high d-glucose but not to l-glucose, being consistent with the decrease of surface ABCA1. It is suggested that localization of ABCA1 to the cell surface is decreased in hepatocytes in hyperglycemic condition to cause decrease of HDL biogenesis.

  17. High concentrations of NaCl induce cell swelling leading to senescence in human cells.

    Science.gov (United States)

    Yamakami, Yoshimi; Yonekura, Ryuzo; Matsumoto, Yuko; Takauji, Yuki; Miki, Kensuke; Fujii, Michihiko; Ayusawa, Dai

    2016-01-01

    Cell swelling and retardation in DNA replication are always observed in senescent cells. When DNA replication is slowed down with RNA and protein syntheses unchanged in proliferating cells, it causes a phenomenon known as unbalanced growth. The purpose of this study is to assess the role of cell swelling in unbalanced growth in terms of senescence and investigate the mechanism underlying this phenomenon. We tried to induce cell swelling with minimum damage to cells in this study. We perturbed the osmoregulatory functions to induce cell swelling under hypotonic and hypertonic conditions in normal human fibroblasts. Addition of excess NaCl was found to induce significant cell and nuclear swelling in dose- and time-dependent manners. Excess NaCl immediately retarded DNA replication, accumulated cells at G1 phase of the cell cycle, and eventually deprived division potential of the cells. Such cells showed typical senescent cell shape followed by expression of the typical senescence-associated genes. Excess NaCl also activated ERK1/2, p38, and JNK of the mitogen activated protein kinase family. Addition of U0126, an inhibitor of ERK1/2, prevented appearance of senescent features induced by excess NaCl. These results suggest that hypertonic conditions induce cell swelling due to unbalanced growth, thereby leading to cellular senescence.

  18. High glucose concentrations alter the biomineralization process in human osteoblastic cells.

    Science.gov (United States)

    García-Hernández, A; Arzate, H; Gil-Chavarría, I; Rojo, R; Moreno-Fierros, L

    2012-01-01

    Diabetes mellitus (DM) may alter bone remodeling, as osteopenia and osteoporosis are among the complications. Moreover, DM increases the risk and severity of chronic inflammatory periodontal disease, in which bone resorption occurs. Broad evidence suggests that chronic inflammation can contribute to the development of DM and its complications. Hyperglycemia is a hallmark of DM that may contribute to sustained inflammation by increasing proinflammatory cytokines, which are known to cause insulin resistance, via toll-like receptor (TLR)-4-mediated mechanisms. However, the mechanisms by which bone-related complications develop in DM are still unknown. Studies done on the effect of high glucose concentrations on osteoblast functions are contradictory because some suggest increases (although others suggest reductions) in the biomineralization process. Therefore, we evaluated the effect of high glucose levels on biomineralization and inflammation markers in a human osteoblastic cell line. Cells were treated with either physiological 5.5 mM or increasing concentrations of glucose up to 24 mM, and we determined the following: i) the quantity and quality of calcium-deposit crystals in culture and ii) the expression of the following: a) proteins associated with the process of biomineralization, b) the receptor activator of nuclear factor kappa-B ligand (RANKL) and osteoprotegerin (OPG), c) cytokines IL1, IL6, IL8, IL10, MCP-1 and TNF alpha, and d) TLR-2, -3, -4 and -9. Our results show that high glucose concentrations (12 mM and particularly 24 mM) alter the biomineralization process in osteoblastic cells and provoke the following: i) a rise in mineralization, ii) an increase in the mRNA expression of RANKL and a decrease of OPG, iii) an increase in the mRNA expression of osteocalcin, bone sialoprotein and the transcription factor Runx2, iv) a diminished quality of the mineral, and v) an increase in the expression of IL1beta, IL6, IL8, MCP-1 and IL10 mRNAs. In addition we

  19. Growth Inhibition Occurs Independently of Cell Mortality in Tomato (Solanum lycopersicum) Exposed to High Cadmium Concentrations

    Institute of Scientific and Technical Information of China (English)

    Christine Delpérée; Stanley Lutts

    2008-01-01

    In order to analyze the adaptation potential of tomato shoots to a sudden increase in Cd concentration, tomato plants (Solanum lycopersicum L. var. Ailsa Craig) were exposed under controlled environmental conditions to a high dose of this heavy metal (250 μM CdCl2>) in nutrient solution for 7 and 14 d. Both root and shoot growth was completely inhibited but all plants remained alive until the end of the treatment. Cell viability remained unaffected but the activity of the mitochondrial alternative pathway was stimulated by Cd stress at the expense of the cytochrome pathway. Cadmium concentration was higher in roots than in shoots and a decrease In the rate of net Cd translocation was noticed during the second week of stress. Cadmium decreased both leaf conductance (g1>) and chlorophyll concentration. However, the effect on net CO2 assimilation remained limited and soluble sugars accumulated in leaves. Photochemical efficiency of PSll (FvlFm) was not affected despite a decrease in the number of reaction centers and an inhibition of electron transfer to acceptors of PSII. It is concluded that tomato shoot may sustain short term exposure to high doses of cadmium despite growth inhibition. This property implies several physiological strategies linked to both avoidance and tolerance mechanisms.

  20. The effects of concentrated ultraviolet light on high-efficiency silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Ruby, D.S.; Schubert, W.K.

    1991-01-01

    The importance of stability in the performance of solar cells is clearly recognized as fundamental. Some of the highest efficiency silicon solar cells demonstrated to date, such as the Point Contact solar cell and the Passivated Emitter solar cell, rely upon the passivation of cell surfaces in order to minimize recombination, which reduces cell power output. Recently, it has been shown that exposure to ultraviolet (UV) light of wavelengths present in the terrestrial solar spectrum can damage a passivating silicon-oxide interface and increase recombination. In this study, we compared the performance of Point Contact and Passivated Emitter solar cells after exposure to UV light. We also examined the effect of UV exposure on oxide-passivated silicon wafers. We found that current Passivated Emitter designs are stable at both one-sun and under concentrated sunlight. The evolution of Point Contact concentrator cell performance shows a clear trend towards more stable cells. 15 refs., 18 figs.

  1. Evaluating the impact of high Pluronic® F68 concentrations on antibody producing CHO cell lines.

    Science.gov (United States)

    Tharmalingam, Tharmala; Goudar, Chetan T

    2015-04-01

    Pluronic® F68 (P-F68) is an important component of chemically-defined cell culture medium because it protects cells from hydrodynamic and bubble-induced shear in the bioreactor. While P-F68 is typically used in cell culture medium at a concentration of 1 g/L (0.1%), higher concentrations can offer additional shear protection and have also been shown to be beneficial during cryopreservation. Recent industry experience with variability in P-F68-associated shear-protection has opened up the possibility of elevated P-F68 concentrations in cell culture media, a topic that has not been previously explored in the context of industrial cell culture processes. Recognizing this gap, we first evaluated the effect of 1-5 g/L P-F68 concentrations in shake flask cultures over ten 3-day passages for cell lines A and B. Increase in terminal cell density and cell size was seen over time at higher P-F68 concentrations but protein productivity was not impacted. Results from this preliminary screening study suggested no adverse impact of high P-F68 concentrations. Subsequently fed-batch bioreactor experiments were conducted at 1 and 5 g/L P-F68 concentrations with both cell lines where cell growth, viability, metabolism, and product quality were examined under process conditions reflective of a commercial process. Results from these bioreactor experiments confirmed findings from the preliminary screen and also indicated no impact of elevated P-F68 concentration on product quality. If additional shear protection is desired, either due to raw material variability, cell line sensitivity, or a high-shear cell culture process, our results suggest this can be accomplished by elevating the P-F68 concentration in the cell culture medium without impacting cell culture performance and product quality.

  2. Preservation of high glycolytic phenotype by establishing new acute lymphoblastic leukemia cell lines at physiologic oxygen concentration

    Energy Technology Data Exchange (ETDEWEB)

    Sheard, Michael A., E-mail: msheard@chla.usc.edu [Developmental Therapeutics Program, USC-CHLA Institute for Pediatric Clinical Research, Division of Hematology-Oncology, Children' s Hospital Los Angeles, 4650 Sunset Blvd., Los Angeles, CA 90027 (United States); Ghent, Matthew V., E-mail: mattghent@gmail.com [Department of Pathology, Keck School of Medicine, University of Southern California, Health Sciences Campus, Los Angeles, CA 90089 (United States); Cabral, Daniel J., E-mail: dcabral14@gmail.com [Cancer Center and Departments of Cell Biology & Biochemistry, Pharmacology & Neuroscience, Internal Medicine and Pediatrics, School of Medicine, Texas Tech University Health Sciences Center, Lubbock, TX 79430 (United States); Lee, Joanne C., E-mail: joannebarnhart@gmail.com [Cancer Center and Departments of Cell Biology & Biochemistry, Pharmacology & Neuroscience, Internal Medicine and Pediatrics, School of Medicine, Texas Tech University Health Sciences Center, Lubbock, TX 79430 (United States); Khankaldyyan, Vazgen, E-mail: khangaldian@yahoo.com [Developmental Therapeutics Program, USC-CHLA Institute for Pediatric Clinical Research, Division of Hematology-Oncology, Children' s Hospital Los Angeles, 4650 Sunset Blvd., Los Angeles, CA 90027 (United States); Ji, Lingyun, E-mail: lingyun.ji@med.usc.edu [Developmental Therapeutics Program, USC-CHLA Institute for Pediatric Clinical Research, Division of Hematology-Oncology, Children' s Hospital Los Angeles, 4650 Sunset Blvd., Los Angeles, CA 90027 (United States); Wu, Samuel Q., E-mail: swu@chla.usc.edu [Medical Genetics, Children' s Hospital Los Angeles, 4650 Sunset Blvd., Los Angeles, CA 90027 (United States); Kang, Min H., E-mail: min.kang@ttuhsc.edu [Cancer Center and Departments of Cell Biology & Biochemistry, Pharmacology & Neuroscience, Internal Medicine and Pediatrics, School of Medicine, Texas Tech University Health Sciences Center, Lubbock, TX 79430 (United States); and others

    2015-05-15

    Cancer cells typically exhibit increased glycolysis and decreased mitochondrial oxidative phosphorylation, and they continue to exhibit some elevation in glycolysis even under aerobic conditions. However, it is unclear whether cancer cell lines employ a high level of glycolysis comparable to that of the original cancers from which they were derived, even if their culture conditions are changed to physiologically relevant oxygen concentrations. From three childhood acute lymphoblastic leukemia (ALL) patients we established three new pairs of cell lines in both atmospheric (20%) and physiologic (bone marrow level, 5%) oxygen concentrations. Cell lines established in 20% oxygen exhibited lower proliferation, survival, expression of glycolysis genes, glucose consumption, and lactate production. Interestingly, the effects of oxygen concentration used during cell line initiation were only partially reversible when established cell cultures were switched from one oxygen concentration to another for eight weeks. These observations indicate that ALL cell lines established at atmospheric oxygen concentration can exhibit relatively low levels of glycolysis and these levels are semi-permanent, suggesting that physiologic oxygen concentrations may be needed from the time of cell line initiation to preserve the high level of glycolysis commonly exhibited by leukemias in vivo. - Highlights: • Establishing new ALL cell lines in 5% oxygen resulted in higher glycolytic expression and function. • Establishing new ALL cell lines in 5% oxygen resulted in higher proliferation and lower cell death. • The divergent metabolic phenotypes selected in 5% and 20% oxygen are semi-permanent.

  3. Performance and Degradation of A Lithium-Bromine Rechargeable Fuel Cell Using Highly Concentrated Catholytes

    CERN Document Server

    Bai, Peng

    2016-01-01

    Lithium-air batteries have been considered as ultimate solutions for the power source of long-range electrified transportation, but state-of-the-art prototypes still suffer from short cycle life, low efficiency and poor power output. Here, a lithium-bromine rechargeable fuel cell using highly concentrated bromine catholytes is demonstrated with comparable specific energy, improved power density, and higher efficiency. The cell is similar in structure to a hybrid-electrolyte Li-air battery, where a lithium metal anode in nonaqueous electrolyte is separated from aqueous bromine catholytes by a lithium-ion conducting ceramic plate. The cell with a flat graphite electrode can discharge at a peak power density around 9mW cm-2 and in principle could provide a specific energy of 791.8 Wh kg-1, superior to most existing cathode materials and catholytes. It can also run in regenerative mode to recover the lithium metal anode and free bromine with 80-90% voltage efficiency, without any catalysts. Degradation of the sol...

  4. Strategies to decolorize high concentrations of methyl orange using growing cells of Lactobacillus casei TISTR 1500.

    Science.gov (United States)

    Tantiwa, Nidtaya; Seesuriyachan, Phisit; Kuntiya, Ampin

    2013-01-01

    Batch, fed-batch, and continuous fermentation was used in the processing of methyl orange decolorization using growing cells of Lactobacillus casei TISTR 1500. This report presents the optimal conditions for methyl orange decolorization by the strain TISTR 1500 in modified MRS via a central composite design (CCD) experiment. In particular, the highest decolorization efficiencies were obtained with 13.41 g/L of meat extract, and with 10.89 g/L of yeast extract at pH 6.88 at 35 °C. Under the optimal conditions, the rate of decolorization increased to 322% of that obtained for un-optimized MRS medium. The high concentration of methyl orange (5 g/L) was completely degraded within 9 h in batch fermentation. The total methyl orange load with 8.075 g/L was also decolorized in fed-batch fermentation within 13 h, and the biomass of the strain dramatically decreased after an incubation time of 8 h due to a shortage of sucrose. In the continuous system with a dye-loading rate of 600 mg/L/h and a total of loaded azo dye of 7.2 g/L, high efficiency of methyl orange removal was significantly high, at 98%.

  5. Low cost, high concentration ratio solar cell array for space applications

    Science.gov (United States)

    Patterson, R. E.; Rauschenbach, H. S.; Cannady, M. D.; Whang, U. S.; Crabtree, W. L.

    1981-01-01

    A miniaturized Cassegrainian-type concentrator solar array concept for space applications is described. In-orbit cell operating temperatures near 80 C are achieved with purely passive cell cooling and a net concentration ratio of 100. A multiplicity of miniaturized, rigid solar cell concentrator subassemblies are electrically interconnected in conventional fashion and mounted into rigid frames to form concentrator solar panel assemblies approximately 14-mm thick. A plurality of such interconnected panels forms a stowable and deployable solar cell blanket. It is projected that for 20% efficient silicon cells an array of 500 kW beginning-of-life output capability, including orbiter cradle structures, can be transported by a single shuttle orbiter flight into low earth orbit. In-orbit array specific performance is calculated to be approximately 100 W/sq m and 20 W/kg, including all stowage, deployment and array figure control equipment designed for a 30-year orbital life. Higher efficiency gallium arsenide and multiple band gap solar cells will improve these performance factors correspondingly.

  6. High-efficiency concentration/multi-solar-cell system for orbital power generation

    Science.gov (United States)

    Onffroy, J. R.; Stoltzmann, D. E.; Lin, R. J. H.; Knowles, G. R.

    1980-01-01

    An analysis was performed to determine the economic feasibility of a concentrating spectrophotovoltaic orbital electrical power generation system. In this system dichroic beam-splitting mirrors are used to divide the solar spectrum into several wavebands. Absorption of these wavebands by solar cells with matched energy bandgaps increases the cell efficiency while decreasing the amount of heat which must be rejected. The optical concentration is performed in two stages. The first concentration stage employs a Cassegrain-type telescope, resulting in a short system length. The output from this stage is directed to compound parabolic concentrators which comprise the second stage of concentration. Ideal efficiencies for one-, two-, three-, and four-cell systems were calculated under 1000 sun, AMO conditions, and optimum energy bands were determined. Realistic efficiencies were calculated for various combinations of Si, GaAs, Ge and GaP. Efficiencies of 32 to 33 percent were obtained with the multicell systems. The optimum system consists of an f/3.5 optical system, a beam splitter to divide the spectrum at 0.9 microns, and two solar cell arrays, GaAs and Si.

  7. A high-performance photovoltaic concentrator array - The mini-dome Fresnel lens concentrator with 30 percent efficient GaAs/GaSb tandem cells

    Science.gov (United States)

    Piszczor, M. F.; Brinker, D. J.; Flood, D. J.; Avery, J. E.; Fraas, L. M.; Fairbanks, E. S.; Yerkes, J. W.; O'Neill, M. J.

    1991-01-01

    A high-efficiency, lightweight space photovoltaic concentrator array is described. Previous work on the minidome Fresnel lens concentrator concept is being integrated with Boeing's 30 percent efficient tandem GaAs/GaSb concentrator cells into a high-performance photovoltaic array. Calculations indicate that, in the near term, such an array can achieve 300 W/sq m at a specific power of 100 W/kg. Emphasis of the program has now shifted to integrating the concentrator lens, tandem cell, and supporting panel structure into a space-qualifiable array. A description is presented of the current status of component and prototype panel testing and the development of a flight panel for the Photovoltaic Array Space Power Plus Diagnostics (PASP PLUS) flight experiment.

  8. Effects of ammonium concentration and charge exchange on ammonium recovery from high strength wastewater using a microbial fuel cell

    NARCIS (Netherlands)

    Kuntke, P.; Geleij, M.; Bruning, H.; Zeeman, G.; Hamelers, H.V.M.; Buisman, C.J.N.

    2011-01-01

    Ammonium recovery using a 2 chamber microbial fuel cell (MFC) was investigated at high ammonium concentration. Increasing the ammonium concentration (from 0.07 g to 4 g ammonium-nitrogen/L) by addition of ammonium chloride did not affect the performance of the MFC. The obtained current densities by

  9. High-temperature passive direct methanol fuel cells operating with concentrated fuels

    Science.gov (United States)

    Zhao, Xuxin; Yuan, Wenxiang; Wu, Qixing; Sun, Hongyuan; Luo, Zhongkuan; Fu, Huide

    2015-01-01

    Conventionally, passive direct methanol fuel cells (DMFC) are fed with diluted methanol solutions and can hardly be operated at elevated temperatures (>120 °C) because the ionic conductivity of Nafion-type proton exchange membranes depends strongly on water content. Such a system design would limit its energy density and power density in mobile applications. In this communication, a passive vapor feed DMFC capable of operating with concentrated fuels at high temperatures is reported. The passive DMFC proposed in this work consists of a fuel reservoir, a perforated silicone sheet, a vapor chamber, two current collectors and a membrane electrode assembly (MEA) based on a phosphoric acid doped polybenzimidazole (PBI) membrane. The experimental results reveal that the methanol crossover through a PBI membrane is substantially low when compared with the Nafion membranes and the PBI-based passive DMFC can yield a peak power density of 37.2 mW cm-2 and 22.1 mW cm-2 at 180 °C when 16 M methanol solutions and neat methanol are used respectively. In addition, the 132 h discharge test indicates that the performance of this new DMFC is quite stable and no obvious performance degradation is observed after activation, showing its promising applications in portable power sources.

  10. Estimation of CO concentration in high temperature PEM fuel cells using electrochemical impedance

    DEFF Research Database (Denmark)

    Jensen, Hans-Christian Becker; Andreasen, Søren Juhl; Kær, Søren Knudsen

    2013-01-01

    , a possible solution, an avoidance of the long recharging time is combining them with the use of fuel cells. Fuel cells continuously deliver electrical power as long as a proper fuel supply is maintained. The ideal fuel for fuel cells is hydrogen, which in it’s pure for has high volumetric storage...... requirements. One of the solutions to this fuel storage problem is using liquid fuels such as methanol that through a chemical reformer converts the fuel into a hydrogen rich gas mixture. Methanol is a liquid fuel, which has low storage requirements and high temperature polymer electrolyte membrane (HTPEM......) fuel cells can eciently run on the reformed hydrogen rich gas, although with reduced performance depending on the contaminants, such as CO, in the gas. By estimating the amount of CO in the fuel cell, it could be possible to adjust the fuel cell system operating parameters to increase performance...

  11. The intensity dependence of surface recombination in high concentration solar cells with charge induced passivation

    Science.gov (United States)

    Gray, J. L.; Schwartz, R. J.; Lundstrom, M. S.; Nasby, R. D.

    High intensity solar cells which are designed to minimize series resistance and shadowing losses, frequently employ an illuminated surface which is relatively far removed from the collecting junctions. This requires that the surface be well passivated to minimize surface recombination. One technique frequently employed to minimize surface recombination is to incorporate a fixed charge in the passivating oxide. This work shows that at sufficiently high intensities the surface recombination can increase dramatically. This results in a reduction in the high intensity collection efficiency. A comparison of the collection efficiency of interdigitated back contact cells and etched multiple vertical junction cells is given which shows that EMVJ cells are less sensitive to this effect than IBC cells.

  12. Technology Enabling Ultra High Concentration Multi-Junction Cells. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Bedair, S. M.; Colter, Peter

    2016-03-30

    The project goal is to enable multijunction cells to operate at greater than 2000× suns intensity with efficiency above forty percent. To achieve this goal the recipients have developed a robust high-bandgap tunnel junction, reduce series resistance, and integrated a practical heat dissipation scheme.

  13. High-concentration of BMP2 reduces cell proliferation and increases apoptosis via DKK1 and SOST in human primary periosteal cells.

    Science.gov (United States)

    Kim, Harry K W; Oxendine, Ila; Kamiya, Nobuhiro

    2013-05-01

    BMP2, a well-known osteoinductive agent approved by FDA, is currently being used for various off-label orthopedic applications. Recently, concerns about its efficacy for off-label use, concentration, and complications have emerged. Interestingly, there is an extremely large discrepancy in BMP2 concentration between clinical use (i.e. 1.5mg/ml) and in vitro studies (50-300 ng/ml). The purpose of this study was to determine the effects of a relatively high-concentration of BMP2 on cell proliferation and apoptosis using human primary periosteal cells as BMP2 is generally applied around the periosteum in orthopedic surgeries. We isolated periosteal cells from three independent patients. The cell proliferation assessed by MTT activity was significantly reduced by a high-concentration of BMP2 (~2000 ng/ml), while such a reduction was not observed by using a low-concentration of BMP2 (~200 ng/ml). The cell apoptosis assessed by caspase activity was significantly increased by high-concentration BMP2, while such an increase was not observed by low-concentration BMP2. We found that Wnt signaling activity was significantly reduced by high-concentration BMP2 along with a dramatic increase in DKK1 and SOST, key inhibitors of Wnt signaling in bone. The addition of DKK1 or SOST protein to the primary periosteal cells reduced MTT activity and significantly increased caspase activity. Silencing the DKK1 or SOST expression using the siRNA technique normalized cell proliferation and apoptosis in the periosteum-derived cells when exposed to a high-concentration BMP2. Taken together, these results suggest that a high-concentration BMP2 decreases human periosteal cell proliferation and induces apoptosis via the activation of Wnt inhibitors DKK1 and SOST. This study provides new insights to the effects of high BMP2 concentration on human periosteal cells and brings out the possibility of multiple effects of current BMP2 therapy on various skeletal tissues.

  14. Effect of Different High CO2 Concentrations on the Development of 2-cell Mouse Embryos in vitro

    Institute of Scientific and Technical Information of China (English)

    Li-hua LU; Wei-jie ZHU

    2003-01-01

    Objective To investigate effects of different high CO2 concentrations on the development of 2-cell mouse embryos in vitroMethods At levels of 5% CO2 (control group), 5.7% CO2, 6.0% CO2 and 15% CO2, embryos were incubated in drops with CZB medium, respectively, and the drops were covered by paraffin oil which was treated with three-distilled water. In addition, at the level of 15% CO2, there were another two groups, in which paraffin oil was treated with phosphate-buffered saline (PBS) solution or the drops were uncovered. The development of embryos in all stages was noted.Results The developmental rates of blastocysts in five experimental groups were significantly lower than that of the control group (P0.05). At the level of 15% CO2, 15% embryos developed in the 4-cell stage with irregular blastomere and degenerated quickly in the group which paraffin oil was treated with distilled water; 2.2% embryos developed in the 4-cell stage in the group which paraffin oil was treated with PBS and the rest stagnated in the 2-cell stage. Conclusions High CO2 concentrations had toxic effect on the in vitro development of 2-cell mouse embryos, and was responsible for the inhibition of the embryos. It is important for the development of embryos in vitro to detect strictly CO2 concentration.

  15. Vertical InGaN-based green-band solar cells operating under high solar concentration up to 300 suns.

    Science.gov (United States)

    Sheu, Jinn-Kong; Chen, Fu-Bang; Wu, Shou-Hung; Lee, Ming-Lun; Chen, Po-Cheng; Yeh, Yu-Hsiang

    2014-08-25

    InGaN/GaN-based solar cells with vertical-conduction feature on silicon substrates were fabricated by wafer bonding technique. The vertical solar cells with a metal reflector sandwiched between the GaN-based epitaxial layers and the Si substrate could increase the effective thickness of the absorption layer. Given that the thermally resistive sapphire substrates were replaced by the Si substrate with high thermal conductivity, the solar cells did not show degradation in power conversion efficiency (PCE) even when the solar concentrations were increased to 300 suns. The open circuit voltage increased from 1.90 V to 2.15 V and the fill factor increased from 0.55 to 0.58 when the concentrations were increased from 1 sun to 300 suns. With the 300-sun illumination, the PCE was enhanced by approximately 33% compared with the 1-sun illumination.

  16. Development of concentrator solar cells

    Energy Technology Data Exchange (ETDEWEB)

    1994-08-01

    A limited pilot production run on PESC silicon solar cells for use at high concentrations (200 to 400 suns) is summarized. The front contact design of the cells was modified for operation without prismatic covers. The original objective of the contract was to systematically complete a process consolidation phase, in which all the, process improvements developed during the contract would be combined in a pilot production run. This pilot run was going to provide, a basis for estimating cell costs when produced at high throughput. Because of DOE funding limitations, the Photovoltaic Concentrator Initiative is on hold, and Applied Solar`s contract was operated at a low level of effort for most of 1993. The results obtained from the reduced scope pilot run showed the effects of discontinuous process optimization and characterization. However, the run provided valuable insight into the technical areas that can be optimized to achieve the original goals of the contract.

  17. Multiple paths of electron flow to current in microbial electrolysis cells fed with low and high concentrations of propionate.

    Science.gov (United States)

    Hari, Ananda Rao; Katuri, Krishna P; Gorron, Eduardo; Logan, Bruce E; Saikaly, Pascal E

    2016-07-01

    Microbial electrolysis cells (MECs) provide a viable approach for bioenergy generation from fermentable substrates such as propionate. However, the paths of electron flow during propionate oxidation in the anode of MECs are unknown. Here, the paths of electron flow involved in propionate oxidation in the anode of two-chambered MECs were examined at low (4.5 mM) and high (36 mM) propionate concentrations. Electron mass balances and microbial community analysis revealed that multiple paths of electron flow (via acetate/H2 or acetate/formate) to current could occur simultaneously during propionate oxidation regardless of the concentration tested. Current (57-96 %) was the largest electron sink and methane (0-2.3 %) production was relatively unimportant at both concentrations based on electron balances. At a low propionate concentration, reactors supplemented with 2-bromoethanesulfonate had slightly higher coulombic efficiencies than reactors lacking this methanogenesis inhibitor. However, an opposite trend was observed at high propionate concentration, where reactors supplemented with 2-bromoethanesulfonate had a lower coulombic efficiency and there was a greater percentage of electron loss (23.5 %) to undefined sinks compared to reactors without 2-bromoethanesulfonate (11.2 %). Propionate removal efficiencies were 98 % (low propionate concentration) and 78 % (high propionate concentration). Analysis of 16S rRNA gene pyrosequencing revealed the dominance of sequences most similar to Geobacter sulfurreducens PCA and G. sulfurreducens subsp. ethanolicus. Collectively, these results provide new insights on the paths of electron flow during propionate oxidation in the anode of MECs fed with low and high propionate concentrations.

  18. Multiple paths of electron flow to current in microbial electrolysis cells fed with low and high concentrations of propionate

    KAUST Repository

    Rao, Hari Ananda

    2016-03-03

    Microbial electrolysis cells (MECs) provide a viable approach for bioenergy generation from fermentable substrates such as propionate. However, the paths of electron flow during propionate oxidation in the anode of MECs are unknown. Here, the paths of electron flow involved in propionate oxidation in the anode of two-chambered MECs were examined at low (4.5 mM) and high (36 mM) propionate concentrations. Electron mass balances and microbial community analysis revealed that multiple paths of electron flow (via acetate/H2 or acetate/formate) to current could occur simultaneously during propionate oxidation regardless of the concentration tested. Current (57–96 %) was the largest electron sink and methane (0–2.3 %) production was relatively unimportant at both concentrations based on electron balances. At a low propionate concentration, reactors supplemented with 2-bromoethanesulfonate had slightly higher coulombic efficiencies than reactors lacking this methanogenesis inhibitor. However, an opposite trend was observed at high propionate concentration, where reactors supplemented with 2-bromoethanesulfonate had a lower coulombic efficiency and there was a greater percentage of electron loss (23.5 %) to undefined sinks compared to reactors without 2-bromoethanesulfonate (11.2 %). Propionate removal efficiencies were 98 % (low propionate concentration) and 78 % (high propionate concentration). Analysis of 16S rRNA gene pyrosequencing revealed the dominance of sequences most similar to Geobacter sulfurreducens PCA and G. sulfurreducens subsp. ethanolicus. Collectively, these results provide new insights on the paths of electron flow during propionate oxidation in the anode of MECs fed with low and high propionate concentrations.

  19. High Physiological Concentrations of Progesterone Reverse Estradiol-Mediated Changes in Differentiation and Functions of Bone Marrow Derived Dendritic Cells.

    Directory of Open Access Journals (Sweden)

    Fangming Xiu

    Full Text Available Female sex steroids, estradiol (E2 and progesterone (P4, play a key role in regulating immune responses in women, including dendritic cell (DC development, and functions. Although the two hormones co-occur in the body of women throughout the reproductive years, no studies have explored their complex combinatorial effects on DCs, given their ability to regulate each other's actions. We examined murine bone marrow derived dendritic cells (BMDC differentiation and functions, in the presence of a wide range of physiological concentrations of each hormone, as well as the combination of the two hormones. E2 (10(-12 to 10(-8M enhanced the differentiation of CD11b+CD11c+ DCs from BM precursor cells, and promoted the expression of CD40 and MHC Class-II, in a dose-dependent manner. In contrast, P4 (10(-9 to 10(-5M inhibited DC differentiation, but only at the highest concentrations. These effects on BMDCs were observed both in the presence or absence of LPS. When both hormones were combined, higher concentrations of P4, at levels seen in pregnancy (10(-6M reversed the E2 effects, regardless of the concentration of E2, especially in the absence of LPS. Functionally, antigen uptake was decreased and pro-inflammatory cytokines, IL-12, IL-1 and IL-6 production by CD11b+CD11c+ DCs, was increased in the presence of E2 and these effects were reversed by high concentrations of P4. Our results demonstrate the distinct effects of E2 and P4 on differentiation and functions of bone marrow myeloid DCs. The dominating effect of higher physiological concentrations of P4 provides insight into how DC functions could be modulated during pregnancy.

  20. Optimized Interdigitated Back Contact (IBC) solar cell for high concentrated sunlight

    Science.gov (United States)

    Verlinden, P.; van de Wiele, F.; Stehelin, G.; David, J. P.

    A one-dimensional analytical model for Interdigitated Back Contact solar cells (IBC), also applicable to Front Surface Field (FSF) and Tandem Junction (TJ) solar cells, is presented. The quantum efficiency, generation current, dark current, and conversion efficiency are calculated as a function of the physical parameters of the cell (doping levels, junction depths, thickness, and lifetime). The proposed model simulates the response of FSF and TJ solar cells more accurately than models using the concept of effective surface recombination velocity. The optimization of parameters (doping level and dimension of each region) is discussed. It is shown that a conversion efficiency of 24.8 percent can be reached under 50 suns. IBC solar cells were fabricated with different substrate resistivities and thicknesses. The experimental results are compared to the theoretical predictions.

  1. Estimation of CO concentration in high temperature PEM fuel cells using electrochemical impedance

    DEFF Research Database (Denmark)

    Jensen, Hans-Christian Becker; Andreasen, Søren Juhl; Kær, Søren Knudsen;

    This work presents the results of using the electrochemical impedance to analyse the behaviour of a BASF Celtec P2100 MEA operated under varying operating conditions with different temperatures and gas concentrations. Figure 1 shows the experimental setup used for these measurements....

  2. AlGaInP/GaAs Tandem Solar Cells for Power Conversion at 400 degrees C and High Concentration

    Energy Technology Data Exchange (ETDEWEB)

    Steiner, Myles A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Perl, Emmett [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Simon, John D [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Friedman, Daniel J [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Nikhil [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Sharps, Paul [SolAero Technologies Corp.; McPheeters, Claiborne [SolAero Technologies Corp.; Lee, Minjoo L. [University of Illinois at Urbana-Champaign

    2017-09-06

    We demonstrate dual junction (Al)GaInP/GaAs solar cells that are designed to operate at 400 degrees C and 1000X concentration in a hybrid photovoltaic-solar thermal concentrator system. The cells have a front metallization and anti-reflection coating that are stable under 400 degrees C operation. We show how the cell performance degrades with increasing aluminum compositions in the top cell. Our best cell is a GaInP/GaAs tandem that demonstrated 15+/-1% efficiency at 400 degrees C over a concentration range of 300-1000 suns, with several pathways to improved performance.

  3. Modelling and experimental studies on a direct methanol fuel cell working under low methanol crossover and high methanol concentrations

    Energy Technology Data Exchange (ETDEWEB)

    Oliveira, V.B.; Pinto, A.M.F.R. [Centro de Estudos de Fenomenos de Transporte, Departamento de Eng. Quimica, Faculdade de Engenharia da Universidade do Porto, Rua Dr. Roberto Frias, 4200-465 Porto (Portugal); Rangel, C.M. [Instituto Nacional de Energia e Geologia, Fuel Cells and Hydrogen, Estrada do Paco do Lumiar, 1649-038 Lisboa (Portugal)

    2009-08-15

    A number of issues need to be resolved before DMFC can be commercially viable such as the methanol crossover and water crossover which must be minimised in portable DMFCs. The main gain of this work is to systematically vary commercial MEA materials and check their influence on the cell performance of a direct methanol fuel cell operating at close to room temperature. A detailed experimental study on the performance of an <> developed DMFC with 25 cm{sup 2} of active membrane area, working near the ambient conditions is described. Tailored MEAs (membrane-electrode assemblies), with different structures and combinations of gas diffusion layers (GDLs), were designed and tested in order to select optimal working conditions at high methanol concentration levels without sacrificing performance. The experimental polarization and power density curves were successfully compared with the predictions of a steady state, one-dimensional model accounting for coupled heat and mass transfer, along with the electrochemical reactions occurring in the DMFC recently developed by the same authors. The influence of the anode gas diffusion layer media, the membrane thickness and the MEA properties on the cell performance are explained under the light of the predicted methanol crossover rate across the membrane. A tailored MEA build-up with the common available commercial materials was proposed to achieve relatively low methanol crossover, operating at high methanol concentrations. The use of adequate materials for the gas diffusion layers (carbon paper at the anode GDL and carbon cloth at the cathode GDL) enables the use of thinner membranes enhancing the water back diffusion which is essential to work at high methanol concentrations. (author)

  4. High-efficiency thin and compact concentrator photovoltaics with micro-solar cells directly attached to a lens array.

    Science.gov (United States)

    Hayashi, Nobuhiko; Inoue, Daijiro; Matsumoto, Mitsuhiro; Matsushita, Akio; Higuchi, Hiroshi; Aya, Youichirou; Nakagawa, Tohru

    2015-06-01

    We propose a thin and compact concentrator photovoltaic (CPV) module, about 20 mm thick, one tenth thinner than those of conventional CPVs that are widely deployed for mega-solar systems, to broaden CPV application scenarios. We achieved an energy conversion efficiency of 37.1% at a module temperature of 25 °C under sunlight irradiation optimized for our module. Our CPV module has a lens array consisting of 10 mm-square unit lenses and micro solar cells that are directly attached to the lens array, to reduce the focal length of the concentrator and to reduce optical losses due to reflection. The optical loss of the lens in our module is about 9.0%, which is lower than that of conventional CPV modules with secondary optics. This low optical loss enables our CPV module to achieve a high energy conversion efficiency.

  5. Agmatine protects Müller cells from high-concentration glucose-induced cell damage via N-methyl-D-aspartic acid receptor inhibition.

    Science.gov (United States)

    Han, Ning; Yu, Li; Song, Zhidu; Luo, Lifu; Wu, Yazhen

    2015-07-01

    Neural injury is associated with the development of diabetic retinopathy. Müller cells provide structural and metabolic support for retinal neurons. High glucose concentrations are known to induce Müller cell activity. Agmatine is an endogenous polyamine, which is enzymatically formed in the mammalian brain and has exhibited neuroprotective effects in a number of experimental models. The aims of the present study were to investigate whether agmatine protects Müller cells from glucose-induced damage and to explore the mechanisms underlying this process. Lactate dehydrogenase activity and tumor necrosis factor-α mRNA expression were significantly reduced in Müller cells exposed to a high glucose concentration, following agmatine treatment, compared with cells not treated with agmatine. In addition, agmatine treatment inhibited glucose-induced Müller cell apoptosis, which was associated with the regulation of Bax and Bcl-2 expression. Agmatine treatment suppressed glucose-induced phosphorylation of mitogen-activated protein kinase (MAPK) protein in Müller cells. The present study demonstrated that the protective effects of agmatine on Müller cells were inhibited by N-methyl-D-aspartic acid (NMDA). The results of the present study suggested that agmatine treatment protects Müller cells from high-concentration glucose-induced cell damage. The underlying mechanisms may relate to the anti-inflammatory and antiapoptotic effects of agmatine, as well as to the inhibition of the MAPK pathway, via NMDA receptor suppression. Agmatine may be of use in the development of novel therapeutic approaches for patients with diabetic retinopathy.

  6. Comprehensive characterization and understanding of micro-fuel cells operating at high methanol concentrations.

    Science.gov (United States)

    Gago, Aldo S; Esquivel, Juan-Pablo; Sabaté, Neus; Santander, Joaquín; Alonso-Vante, Nicolas

    2015-01-01

    We report on the analysis of the performance of each electrode of an air-breathing passive micro-direct methanol fuel cell (µDMFC) during polarization, stabilization and discharge, with CH3OH (2-20 M). A reference electrode with a microcapillary was used for separately measuring the anode the cathode potential. Information about the open circuit potential (OCP), the voltage and the mass transport related phenomena are available. Using 2 M CH3OH, the anode showed mass transport problems. With 4 and 6 M CH3OH both electrodes experience this situation, whereas with 10 and 20 M CH3OH the issue is attributed to the cathode. The stabilization and fuel consumption time depends mainly on the cathode performance, which is very sensitive to fuel crossover. The exposure to 20 M CH3OH produced a loss in performance of more than 75% of the highest power density (16.3 mW·cm(-2)).

  7. Design and development of a high-concentration photovoltaic concentrator

    Energy Technology Data Exchange (ETDEWEB)

    Hodge, R C

    1982-04-01

    The design and development of a high concentration photovoltaic concentrator module is discussed. The design concept described herein incorporates a curved groove domed Fresnel lens, a high concentration etched multiple vertical junction (EMVJ) solar cell and a passively cooled direct-bonded copper cell mount all packaged in a plastic module. Two seven inch diameter 1200x domed Fresnel lenses were fabricated using single point diamond turning technology. Testing at both GE and Sandia confirmed optical transmission efficiencies of over 83%. Samples of the latest available EMVJ cells were mounted and installed, with a domed Fresnel lens, into a prototype module. Subsequent testing demonstrated net lens-cell efficiencies of 10 to 13%. As a result of this program, salient conclusions have been formulated as to this technology.

  8. Comprehensive characterization and understanding of micro-fuel cells operating at high methanol concentrations

    Directory of Open Access Journals (Sweden)

    Aldo S. Gago

    2015-10-01

    Full Text Available We report on the analysis of the performance of each electrode of an air-breathing passive micro-direct methanol fuel cell (µDMFC during polarization, stabilization and discharge, with CH3OH (2–20 M. A reference electrode with a microcapillary was used for separately measuring the anode the cathode potential. Information about the open circuit potential (OCP, the voltage and the mass transport related phenomena are available. Using 2 M CH3OH, the anode showed mass transport problems. With 4 and 6 M CH3OH both electrodes experience this situation, whereas with 10 and 20 M CH3OH the issue is attributed to the cathode. The stabilization and fuel consumption time depends mainly on the cathode performance, which is very sensitive to fuel crossover. The exposure to 20 M CH3OH produced a loss in performance of more than 75% of the highest power density (16.3 mW·cm−2.

  9. Si concentrator solar cell development. [Final report

    Energy Technology Data Exchange (ETDEWEB)

    Krut, D.D. [Spectrolab, Inc., Sylmar, CA (United States)

    1994-10-01

    This is the final report of a program to develop a commercial, high-efficiency, low-cost concentrator solar cell compatible with Spectrolab`s existing manufacturing infrastructure for space solar cells. The period covered is between 1991 and 1993. The program was funded through Sandia National Laboratories through the DOE concentrator initiative and, was also cost shared by Spectrolab. As a result of this program, Spectrolab implemented solar cells achieving an efficiency of over 19% at 200 to 300X concentration. The cells are compatible with DOE guidelines for a cell price necessary to achieve a cost of electricity of 12 cents a kilowatthour.

  10. Growth and characterization of CdTe absorbers on GaAs by MBE for high concentration PV solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Ari, Ozan; Polat, Mustafa; Selamet, Yusuf [Department of Physics, Izmir Institute of Technology, Izmir 35430 (Turkey); Karakaya, Merve [Department of Material Science and Engineering, Izmir Institute of Technology, Izmir 35430 (Turkey)

    2015-11-15

    CdTe based II-VI absorbers are promising candidates for high concentration PV solar cells with an ideal band gap for AM1.5 solar radiation. In this study, we propose single crystal CdTe absorbers grown on GaAs substrates with a molecular beam epitaxy (MBE) which is a clean deposition technology. We show that high quality CdTe absorber layers can be grown with full width half maximum of X-ray diffraction rocking curves (XRD RC) as low as 227 arc-seconds with 0.5% thickness uniformity that a 2 μm layer is capable of absorbing 99% of AM1.5 solar radiation. Bandgap of the CdTe absorber is found as 1.483 eV from spetroscopic ellipsometry (SE) measurements. Also, high absorption coefficient is calculated from the results, which is ∝5 x 10{sup 5}cm{sup -1} in solar radiation spectrum. (copyright 2015 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim)

  11. Nanoscale control of the network morphology of high efficiency polymer fullerene solar cells by the use of high material concentration in the liquid phase

    Energy Technology Data Exchange (ETDEWEB)

    Radbeh, R; Parbaile, E; Boucle, J; Di Bin, C; Moliton, A; Ratier, B [XLIM UMR 6172, Universite de Limoges/CNRS, 123 avenue Albert Thomas, F-87060 Limoges Cedex (France); Coudert, V; Rossignol, F, E-mail: bernard.ratier@unilim.fr [Laboratoire de Science des Procedes Ceramiques et de Traitements de Surface (SPCTS), 47 avenue Albert Thomas, F-87065 Limoges (France)

    2010-01-22

    Despite the constant improvement of their power conversion efficiencies, organic solar cells based on an interpenetrating network of a conjugated polymer as donor and fullerene derivatives as acceptor materials still need to be improved for commercial use. In this context, we present a study on the optimization of solar cells based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) by varying a specific cell parameter, namely the concentration of the active layer components in the liquid phase before blend film deposition, in order to improve device performance and to better understand the relation between morphology and device operation. Our study shows a significant increase of the short-circuit current, open-circuit voltage and cell efficiency by properly choosing the formulation of the initial blend before film deposition. We demonstrate that the active layer morphology, which is strongly dependent on the initial material concentrations and the processing conditions, can greatly impact the electronic characteristics of the device, especially regarding charge recombination dynamics at the donor-acceptor interface. Our optimized P3HT:PCBM device exhibits both slow recombination and high photocurrent generation associated with an overall power conversion efficiency of 4.25% under 100 mW cm{sup -2} illumination (AM1.5G).

  12. Nanoscale control of the network morphology of high efficiency polymer fullerene solar cells by the use of high material concentration in the liquid phase.

    Science.gov (United States)

    Radbeh, R; Parbaile, E; Bouclé, J; Di Bin, C; Moliton, A; Coudert, V; Rossignol, F; Ratier, B

    2010-01-22

    Despite the constant improvement of their power conversion efficiencies, organic solar cells based on an interpenetrating network of a conjugated polymer as donor and fullerene derivatives as acceptor materials still need to be improved for commercial use. In this context, we present a study on the optimization of solar cells based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) by varying a specific cell parameter, namely the concentration of the active layer components in the liquid phase before blend film deposition, in order to improve device performance and to better understand the relation between morphology and device operation. Our study shows a significant increase of the short-circuit current, open-circuit voltage and cell efficiency by properly choosing the formulation of the initial blend before film deposition. We demonstrate that the active layer morphology, which is strongly dependent on the initial material concentrations and the processing conditions, can greatly impact the electronic characteristics of the device, especially regarding charge recombination dynamics at the donor-acceptor interface. Our optimized P3HT:PCBM device exhibits both slow recombination and high photocurrent generation associated with an overall power conversion efficiency of 4.25% under 100 mW cm(-2) illumination (AM1.5G).

  13. Nanoscale control of the network morphology of high efficiency polymer fullerene solar cells by the use of high material concentration in the liquid phase

    Science.gov (United States)

    Radbeh, R.; Parbaile, E.; Bouclé, J.; Di Bin, C.; Moliton, A.; Coudert, V.; Rossignol, F.; Ratier, B.

    2010-01-01

    Despite the constant improvement of their power conversion efficiencies, organic solar cells based on an interpenetrating network of a conjugated polymer as donor and fullerene derivatives as acceptor materials still need to be improved for commercial use. In this context, we present a study on the optimization of solar cells based on poly(3-hexylthiophene) (P3HT) and [6,6]-phenyl C61 butyric acid methyl ester (PCBM) by varying a specific cell parameter, namely the concentration of the active layer components in the liquid phase before blend film deposition, in order to improve device performance and to better understand the relation between morphology and device operation. Our study shows a significant increase of the short-circuit current, open-circuit voltage and cell efficiency by properly choosing the formulation of the initial blend before film deposition. We demonstrate that the active layer morphology, which is strongly dependent on the initial material concentrations and the processing conditions, can greatly impact the electronic characteristics of the device, especially regarding charge recombination dynamics at the donor-acceptor interface. Our optimized P3HT:PCBM device exhibits both slow recombination and high photocurrent generation associated with an overall power conversion efficiency of 4.25% under 100 mW cm-2 illumination (AM1.5G).

  14. Compact Concentrators for Solar Cells

    Science.gov (United States)

    Whang, V. S.

    1984-01-01

    Each cell in array has own concentrator. A Cassegrain Reflector combination of paraboloidal and hyperboloidar mirrors-used with conical reflector at each element of array. Three components direct light to small solar cell. No cooling fins, fans, pumps, or heat pipes needed, not even in vacuum.

  15. A concentration gradient generator on a paper-based microfluidic chip coupled with cell culture microarray for high-throughput drug screening.

    Science.gov (United States)

    Hong, Bo; Xue, Peng; Wu, Yafeng; Bao, Jingnan; Chuah, Yon Jin; Kang, Yuejun

    2016-02-01

    Inspired by the paper platforms for 3-D cell culture, a paper-based microfluidic device containing drug concentration gradient was designed and constructed for investigating cell response to drugs based on high throughput analysis. This drug gradient generator was applied to generate concentration gradients of doxorubicin (DOX) as the model drug. HeLa cells encapsulated in collagen hydrogel were incubated in the device reservoirs to evaluate the cell viability based on the controlled release of DOX spatially. It was demonstrated that drug diffusion through the paper fibers created a gradient of drug concentration, which influenced cell viability. This drug screening platform has a great opportunity to be applied for drug discovery and diagnostic studies with simultaneous and parallel tests of drugs under various gradient concentrations.

  16. Concentrated sunlight for organic solar cells

    DEFF Research Database (Denmark)

    Tromholt, Thomas

    2010-01-01

    Concentrated sunlight provides a novel approach to the study of the physical and electrical parameters of organic solar cells. The study of performance of organic solar cells at high solar concentrations provides insight into the physics, which cannot be studied with conventional solar simulators....... A high solar intensity study of inverted P3HT:PCBM solar cells is presented. Performance peak positions were found to be in the range of 1-5 suns, with smaller cells peaking at higher solar concentrations. Additionally, concentrated sunlight is demonstrated as a practical tool for accelerated stability...... studies of polymers for organic solar cells. Degradation was monitored by the evolution of the UV-vis absorption over time. Varying the solar intensity from 1 to 200 suns, the degradation rates were increased by more than a factor of 100 relative to degradation at 1 simulated sun. 5 different polymers...

  17. Concentrated sunlight for organic solar cells

    DEFF Research Database (Denmark)

    Tromholt, Thomas

    2010-01-01

    Concentrated sunlight provides a novel approach to the study of the physical and electrical parameters of organic solar cells. The study of performance of organic solar cells at high solar concentrations provides insight into the physics, which cannot be studied with conventional solar simulators...... studies of polymers for organic solar cells. Degradation was monitored by the evolution of the UV-vis absorption over time. Varying the solar intensity from 1 to 200 suns, the degradation rates were increased by more than a factor of 100 relative to degradation at 1 simulated sun. 5 different polymers....... A high solar intensity study of inverted P3HT:PCBM solar cells is presented. Performance peak positions were found to be in the range of 1-5 suns, with smaller cells peaking at higher solar concentrations. Additionally, concentrated sunlight is demonstrated as a practical tool for accelerated stability...

  18. Ultra high open circuit voltage (>1 V) of poly-3-hexylthiophene based organic solar cells with concentrated light

    DEFF Research Database (Denmark)

    Tromholt, Thomas; Madsen, Morten Vesterager; Krebs, Frederik C

    2013-01-01

    One approach to increasing polymer solar cell efficiency is to blend poly-(3-hexyl-thiophene) with poorly electron accepting fullerene derivatives to obtain higher open circuit voltage (Voc). In this letter concentrated light is used to study the electrical properties of cell operation at up...... to 2000 solar intensities of these photoactive blends. Comparison of solar cells based on five different fullerene derivatives shows that at both short circuit and open circuit conditions, recombination remains unchanged up to 50 suns. Determination of Voc at 2000 suns demonstrated that the same...

  19. High concentrations of L-ascorbic acid specifically inhibit the growth of human leukemic cells via downregulation of HIF-1α transcription.

    Directory of Open Access Journals (Sweden)

    Hiroshi Kawada

    Full Text Available We examined the antileukemic effects of high concentrations of L-ascorbic acid (high AA on human leukemic cells. In vitro, high AA markedly induced apoptosis in various leukemic cell lines by generating hydrogen peroxide (H2O2 but not in normal hematopoietic stem/progenitor cells. High AA significantly repressed leukemic cell proliferation as well as neoangiogenesis in immunodeficient mice. We then noted that in leukemic cells, HIF-1α transcription was strongly suppressed by high AA and correlated with the transcription of VEGF. Our data indicate that exposure to high AA markedly increased the intracellular AA content of leukemic cells and inhibited the nuclear translocation of NF-κB, which mediates expression of HIF-1α. We next generated K562 cells that overexpressed HIF-1α (K562-HIF1α cells and assessed the mechanistic relationship between inhibition of HIF-1α transcription and the antileukemic effect of high AA. The ability of high AA to induce apoptosis was significantly lower in K562-HIF1α cells than in K562 cells in vitro. We found that expression of HIF-1α-regulated antiapoptotic proteins of the Bcl-2 family, such as Mcl-1, Bcl-xL, and Bcl-2, was significantly suppressed by high AA in K562 cells, but was sustained at higher levels in K562-HIF1α cells, regardless of high AA exposure. Moreover, repression of cell proliferation and neoangiogenesis by high AA was completely abrogated in mice receiving transplants of K562-HIF1α cells. These results indicate that, along with H2O2 generation, downregulation of HIF-1α transcription plays a crucial role in growth inhibition of human leukemic cells by high AA.

  20. Manufacturing of High-Efficiency Bi-Facial Tandem Concentrator Solar Cells: February 20, 2009--August 20, 2010

    Energy Technology Data Exchange (ETDEWEB)

    Wojtczuk , S.

    2011-06-01

    Spire Semiconductor made concentrator photovoltaic (CPV) cells using a new bi-facial growth process and met both main program goals: a) 42.5% efficiency 500X (AM1.5D, 25C, 100mW/cm2); and b) Ready to supply at least 3MW/year of such cells at end of program. We explored a unique simple fabrication process to make a N/P 3-junction InGaP/GaAs/InGaAs tandem cells . First, the InGaAs bottom cell is grown on the back of a GaAs wafer. The wafers are then loaded into a cassette, spin-rinsed to remove particles, dipped in dilute NH4OH and spin-dried. The wafers are then removed from the cassette loaded the reactor for GaAs middle and InGaP top cell growth on the opposite wafer face (bi-facial growth). By making the epitaxial growth process a bit more complex, we are able to avoid more complex processing (such as large area wafer bonding or epitaxial liftoff) used in the inverted metamorphic (IMM) approach to make similar tandem stacks. We believe the yield is improved compared to an IMM process. After bi-facial epigrowth, standard III-V cell steps (back metal, photolithography for front grid, cap etch, AR coat, dice) are used in the remainder of the process.

  1. High-efficiency, thin-film- and concentrator solar cells from GaAs. Final report; High-efficiency, Duennschicht- und Konzentrator-Solarzellen aus Galliumarsenid. Abschlussbericht

    Energy Technology Data Exchange (ETDEWEB)

    Wettling, W. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Bett, A.W. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Pilkuhn, M. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Scholz, F. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Baldus, A. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Blieske, U. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Blug, A. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Duong, T. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Schetter, C. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Stollwerck, G. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Sulima, O. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Wegener, A. [Fraunhofer-Institut fuer Solare Energiesysteme (ISE), Freiburg im Breisgau (Germany); Doernen, A. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Frankowsky, G. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Haase, D. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Hahn, G. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Hangleiter, A. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Stauss, P. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Tsai, C.Y. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4; Zieger, K. [Stuttgart Univ. (Germany). Physikalisches Teilinstitut 4

    1996-10-01

    Main topic of the project was the manufacturing of highly efficient GaAs-solar cells and the fabrication of concentrator cells. During this process significant progress was made with the material preparation, the solar cell technology and the material and process characterisation. This succeeded in the following efficiencies: - GaAs solar cell made by MOVPE technology: 22.9% on 4 cm{sup 2} (AM1.5g) - GaAs solar cell made by LPE-ER process: 22.8% on 4 cm{sup 2} (AM1.5g) - GaAs concentrator solar cell made by LPE-ER process: 24.9% at C=100xAM1.5d - GaAs concentrator module with fresnel lenses: Module efficiency 20.1% (under irradiation of 793 W/m{sup 2}). Another main focus was the epitaxy of GaAs on Si substrate. Two different approaches were investigated. Together with the cooperation partner ASE, Heilbronn a selective growth technology was developed that led to a decreased crack formation. By a simultanous optimization of the other epitaxy and process parameters, the efficiency was increased up to 16.6% AM0 on 1 cm{sup 2} solar cells. Furthermore a hybrid epitaxy was investigated. A GaAs layer was deposited onto a Si substrate using MOVPE. The solar cell structure was grown with a low temperature LPE. Unexpected difficulties appeared with this process, so that fundamental experiments needed to be done with the LPE technology. So far, no solar cells could be manufactured with this method. In addition, work was performed on GaInP solar cells on GaAs substrate. An efficiency of 15.7% (AM0) was acchieved. (orig.) [Deutsch] Gegenstand des Projekts war die Herstellung hocheffizienter GaAs-Solarzellen und die Fertigung von Konzentratorsolarzellen. Dazu wurden wesentliche Fortschritte bei der Materialpraeparation, der Solarzellentechnologie und der Material- and Prozesscharakterisierung erzielt. Diese Erfolge druecken sich in den erzielten Wirkungsgraden aus: - GaAs-Solarzelle hergestellt mit MOVPE-Technologie: 22.9% auf 4 cm{sup 2} (AM1.5g) - GaAs-Solarzelle hergestellt

  2. Automated concentrator cell module assembly

    Science.gov (United States)

    Olah, S.; Sampson, W.

    The performance and features of linear concentrator photovoltaic arrays fabricated partially by an automated soldering machine are detailed. Float zone Si cells were mounted in five linear modules each 1.2 m long containing 48 cells. The cell strings were made up of 4 12-cell segments encapsulated in polyvinyl butyral, with two bypass diodes for every segment. An efficiency of 16.4% was achieved at 55 C, and humidity tests showed no performance degradation or cracks in an Al3O3 coating. The automatic soldering machine comprised a ribbon feeding system, an interconnect punch die, a solar cell feeder and soldering mechanism, a ribbon separation mechanism with cut-off die and outfeed, and a program control. The machine operated with low-line voltage, compressed air, and vacuum, and the processing of the cells is outlined, including cell soldering by a point contact method with a controlled immersion heater. Standardization of cell sizes is recommended to ensure flexibility of cells which can be handled.

  3. Nitrification and denitrification in two-chamber microbial fuel cells for treatment of wastewater containing high concentrations of ammonia nitrogen.

    Science.gov (United States)

    Du, Haixia; Li, Fusheng; Yu, Zaiji; Feng, Chunhua; Li, Wenhan

    2016-01-01

    Simultaneous nitrification and denitrification in the aerated cathode chamber of microbial fuel cells (MFCs) inoculated with nitrifying bacteria were investigated using two-chamber MFCs. Based on the variations of [Formula: see text], [Formula: see text] and [Formula: see text] in the cathode chamber of four MFCs added with different concentrations of [Formula: see text] (50, 65, 130 and 230 mg/L), the occurrence of simultaneous nitrification and denitrification leading to effective removal of nitrogen was confirmed. Electrochemical reaction with electrons transferred from the anode chamber was found to be the major mechanism responsible for the removal of [Formula: see text] in the cathode chamber. The estimated values of the first-order rate constant for nitrification and denitrification varied in the range of 0.3-1.7 day(-1) and 0.2-0.9 day(-1), revealing a decreasing trend with increases in the initial [Formula: see text] concentrations and the detected maximum concentration of the nitrification product of [Formula: see text] in the cathode chamber, respectively.

  4. Concentration-Gradient Multichannel Flow-Stream Membrane Capacitive Deionization Cell for High Desalination Capacity of Carbon Electrodes.

    Science.gov (United States)

    Kim, Choonsoo; Lee, Juhan; Srimuk, Pattarachai; Aslan, Mesut; Presser, Volker

    2017-07-07

    We present a novel multichannel membrane flow-stream capacitive deionization (MC-MCDI) concept with two flow streams to control the environment around the electrodes and a middle channel for water desalination. The introduction of side channels to our new cell design allows operation in a highly saline environment, while the feed water stream in the middle channel (conventional CDI channel) is separated from the electrodes with anion- and cation-exchange membranes. At a high salinity gradient between side (1000 mm) and middle (5 mm) channels, MC-MCDI exhibited an unprecedented salt-adsorption capacity (SAC) of 56 mg g(-1) in the middle channel with charge efficiency close to unity and low energy consumption. This excellent performance corresponds to a fourfold increase in desalination performance compared to the state-of-the-art in a conventional CDI cell. The enhancement originates from the enhanced specific capacitance in high-molar saline media in agreement with the Gouy-Chapman-Stern theory and from a double-ion desorption/adsorption process of MC-MCDI through voltage operation from -1.2 to +1.2 V. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. High plasma fibrinogen concentration and platelet count unfavorably impact survival in non-small cell lung cancer patients with brain metastases.

    Science.gov (United States)

    Zhu, Jian-Fei; Cai, Ling; Zhang, Xue-Wen; Wen, Yin-Sheng; Su, Xiao-Dong; Rong, Tie-Hua; Zhang, Lan-Jun

    2014-02-01

    High expression of fibrinogen and platelets are often observed in non-small cell lung cancer (NSCLC) patients with local regional or distant metastasis. However, the role of these factors remains unclear. The aims of this study were to evaluate the prognostic significance of plasma fibrinogen concentration and platelet count, as well as to determine the overall survival of NSCLC patients with brain metastases. A total of 275 NSCLC patients with brain metastasis were enrolled into this study. Univariate analysis showed that high plasma fibrinogen concentration was associated with age≥65 years (P = 0.011), smoking status (P = 0.009), intracranial symptoms (P = 0.022), clinical T category (P = 0.010), clinical N category (P = 0.003), increased partial thromboplastin time (P low plasma fibrinogen concentration demonstrated longer overall survival compared with those with high plasma fibrinogen concentration (median, 17.3 months versus 11.1 months; P≤0.001). A similar result was observed for platelet counts (median, 16.3 months versus 11.4 months; P = 0.004). Multivariate analysis showed that both plasma fibrinogen concentration and platelet count were independent prognostic factors for NSCLC with brain metastases (R2 = 1.698, P high plasma fibrinogen concentration and platelet count indicate poor prognosis for NSCLC patients with brain metastases. Thus, these two biomarkers might be independent prognostic predictors for this subgroup of NSCLC patients.

  6. Part II-mechanism of adaptation: A549 cells adapt to high concentration of nitric oxide through bypass of cell cycle checkpoints.

    Science.gov (United States)

    Aqil, Madeeha; Deliu, Zane; Elseth, Kim M; Shen, Grace; Xue, Jiaping; Radosevich, James A

    2014-03-01

    Previous work has shown enhanced survival capacity in high nitric oxide (HNO)-adapted tumor cells. In Part I of this series of manuscripts, we have shown that A549-HNO cells demonstrate an improved growth profile under UV and X-ray radiation treatment. These cells exhibit increased expression of proteins involved in DNA damage recognition and repair pathway, both the non-homologous end joining pathway and homologous recombination. These include Ku80, DNA-PK, XLF ligase and MRN complex proteins. Further, the A549-HNO cells show high levels of ATM, ATR, Chk1 and Chk2, and phospho-p53. Activation of these molecules may lead to cell cycle arrest and apoptosis due to DNA damage. This is observed in parent A549 cells in response to NO donor treatment; however, the A549-HNO cells proliferate and inhibit apoptosis. Cell cycle analysis showed slowed progression through S phase which will allow time for DNA repair. Thus, to better understand the increased growth rate in A549-HNO when compared to the parent cell line A549, we studied molecular mechanisms involved in cell cycle regulation in A549-HNO cells. During the initial time period of NO donor treatment, we observe high levels of cyclin/Cdk complexes involved in regulating various stages of the cell cycle. This would lead to bypass of G1-S and G2-M checkpoints. The HNO cells also show much higher expression of Cdc25A. Cdc25A activates Cdk molecules involved in different phases of the cell cycle. In addition, there is enhanced phosphorylation of the Rb protein in HNO cells. This leads to inactivation of Rb/E2F checkpoint regulating G1-S transition. This may lead to faster progression in S phase. Thus, all of these perturbations in HNO cells lead to accelerated cell cycle progression and a higher growth rate. We also assessed expression of cell cycle inhibitors in HNO cells. Interestingly, the HNO cells show a significant decline in p21CIP1 at initial time points, but with prolonged exposure, the levels were much higher

  7. High-efficiency solar concentrator

    Science.gov (United States)

    Lansing, F. L.; Dorman, J.

    1980-01-01

    A new type of solar concentrator is presented using liquid lenses and simple translational tracking mechanism. The concentrator achieves a 100:1 nominal concentration ratio and is compared in performance with a flat-plate collector having two sheets of glazing and non-selective coating. The results of the thermal analysis show that higher temperatures can be obtained with the concentrator than is possible with the non-concentrator flat-plate type. Furthermore, the thermal efficiency far exceeds that of the comparative flat-plate type for all operating conditions.

  8. Production of high concentrations of yeast

    Energy Technology Data Exchange (ETDEWEB)

    1981-11-10

    A microbe is aerobically cultured using O/sub 2/ or a gas rich in O/sub 2/. The grown cells are washed, concentrated and a portion of the cells used as a seed culture. Thus, Saccharomyces cerevisiae (bakers' yeast) was cultured in a jar fermentor by flow down system maintaining the dissolved O/sub 2/ at 2-5 mg/L; volume of the initial medium containing 30% glucose was 350 mL and the initial washed cell concentration was 50 g dry cells/L. After 12 hours of cultivation, the volume of the medium increased to 750 mL and the cell concentration rose to 102 g dry cells/L; the yield was 49% with respect to glucose. The cells were washed and the cultivation was repeated by use of the washed cells; cell concentration reached 105 g dry cells/L.

  9. Cytotoxic effects of nanosilver are highly dependent on the chloride concentration and the presence of organic compounds in the cell culture media.

    Science.gov (United States)

    Kaiser, Jean-Pierre; Roesslein, Matthias; Diener, Liliane; Wichser, Adrian; Nowack, Bernd; Wick, Peter

    2017-01-06

    Nanosilver shows great promise for use in industrial, consumer or medical products because of its antimicrobial properties. However, the underlying mechanisms of the effects of silver nanoparticles on human cells are still controversial. Therefore, in the present study the influence of the chloride concentration and different serum content of culture media on the cytotoxic effects of nanosilver was systematically evaluated. Our results show that nanosilver toxicity was strongly affected by the composition of the culture media. The chloride concentration, as well as the carbon content affected the silver agglomeration and the complex formation. But also the dissolution of nanosilver and the availability of free silver ions (Ag(+)) were severely affected by the compositions of the culture media. Cells, only exposed to silver particles in suspension and dissolved silver complexes, did not show any effects under all conditions. Nanosilver agglomerates and silver complexes were not very soluble. Thus, cells growing on the bottom of the culture dishes were exposed to sedimented nanosilver agglomerates and precipitated silver complexes. Locally, the concentration of silver on the cell surface was very high, much higher compared the silver concentration in the bulk solution. The cytotoxic effects of nanosilver are therefore a combination of precipitated silver complexes and organic silver compounds rather than free silver ions. Silver coatings are used in health care products due to their bacteriostatic or antibacterial properties. The assessment of the toxicity of a certain compound is mostly done using in vitro assays. Therefore, cytotoxicity studies of nanosilver using human cell cultures have to be undertaken under well controlled and understood cultivations conditions in order to improve the compatibility of different studies. Especially when eukaryotic versus prokaryotic systems are compared for the evaluation of the use of nanosilver as antibacterial coatings for

  10. Opposing effects of low versus high concentrations of water soluble vitamins/dietary ingredients Vitamin C and niacin on colon cancer stem cells (CSCs).

    Science.gov (United States)

    Sen, Utsav; Shenoy P, Sudheer; Bose, Bipasha

    2017-07-29

    Colorectal cancer is one of the global causes of cancer deaths. Cancer stem cells (CSCs) inside the tumour niche responsible for metastasis and relapses, and hence need to be targeted for cancer therapeutics. Although dietary fibre and lifestyle changes have been recommended as measures for colorectal cancer prevention, no such recommendations are available for using water soluble vitamins as prophylaxis measure for colorectal cancers. High dose of Vitamin C has been proven to selectively kill colon cancer cells having BRAF and KRAS mutations by inducing oxidative stress. In this study, we show for the first time the opposing effects of the low and high dose of Vitamin C and vitamin B3 on colon CSCs isolated from HT-29 and HCT-15 colorectal carcinoma cell lines. At small doses, both of these vitamins exerted a cell proliferative effect only on CSCs, while there was no change in the proliferation status of non-stem cancer cells and wild-type (WT) populations. On the other hand, the death effects induced by high doses of Vitamin C and B3 were of the order of 50-60% and ∼30% on CSCs from HT-29 and HCT15, respectively. Interestingly, the control fibroblast cell line (NIH3T3) was highly refractory all the tested concentrations of Vitamin C and B3, except for the highest dose - 10,000 μg of Vitamin C that induced only 15% of cell death. Hence, these results indicate the future scope of use of therapeutic doses of Vitamin C and B3 especially in patients with advanced colorectal cancer. © 2017 International Federation for Cell Biology.

  11. The effects of low and high concentrations of luteolin on cultured human endothelial cells under normal and glucotoxic conditions: involvement of integrin-linked kinase and cyclooxygenase-2.

    Science.gov (United States)

    Abbasi, Naser; Akhavan, Maziar Mohammad; Rahbar-Roshandel, Nahid; Shafiei, Massoumeh

    2014-09-01

    Luteolin protects against high glucose (HG)-induced endothelial dysfunction whereas its cytotoxicity has been reported against normal endothelial cells. This study was undertaken to determine luteolin cytoprotective and cytotoxic dose ranges and to elucidate their respective mechanisms. Luteolin prevented HG-induced human umbilical vein endothelial cell (HUVEC) death with an EC50 value of 2.0 ± 0.07 μM. The protective effect of luteolin was associated with decreased intracellular reactive oxygen species (ROS) and Ca(2+) (Cai(2+)) levels and enhanced nitric oxide (NO) production. At high concentrations, luteolin caused HUVEC death in normal glucose (NG) and HG states (LC50 40 ± 2.23 and 38 ± 1.12 μM, respectively), as represented by increased ROS and Cai(2+) and decreased NO. Western blots illustrated that exposure to HG increased cyclooxygenase-2 (COX-2) and integrin-linked kinase (ILK) expression. Luteolin at low concentrations suppressed HG-mediated up-regulation of COX-2 but maintained HG-induced over-expression of ILK while at high concentrations significantly increased COX-2 and decreased ILK expression in both HG and NG states. Our data indicated that cytoprotective action of luteolin was manifested with much lower concentrations, by a factor of approximately 20, compared with cytotoxic activity under both normal or glucotoxic conditions. It appears that luteolin exerts its action, in part, by modulating ILK expression which is associated with regulation of COX-2 expression and NO production in endothelial cells. Copyright © 2014 John Wiley & Sons, Ltd.

  12. Serum-free medium supplemented with high-concentration FGF2 for cell expansion culture of human ear chondrocytes promotes redifferentiation capacity.

    Science.gov (United States)

    Mandl, Erik W; van der Veen, Simone W; Verhaar, Jan A N; van Osch, Gerjo J V M

    2002-08-01

    For tissue engineering of autologous cartilage, cell expansion is needed to obtain the cell numbers required. Standard expansion media contain bovine serum. This has several disadvantages, that is, the risk of transmitting diseases and serum-batch variations. The aim of this study was to find a serum-free medium with at least the same potential to expand cell numbers as serum-containing media. Ear chondrocytes of three young children were expanded in either serum-containing medium (SCM; DMEM with 10% fetal calf serum) or serum-free medium (SFM; DMEM with ITS+) supplemented with 5 or 100 ng/mL fibroblast growth factor-2 (FGF2). To promote cell adherence onto the culture flask, the serum-free conditions were cultured with 10% serum for 1 day after each trypsinization. After the fourth passage, the chondrocytes were encapsuled in alginate beads and redifferentiated in a SFM (DMEM with ITS+, hydrocortisone, and L-ascorbic acid) supplemented with 10 ng/mL IGF-I and 10 ng/mL TGFbeta-2. Results showed that expansion in SFM with 100 ng/mL FGF2 was comparable to expansion in SCM. Redifferentiation with SFM with IGF-I and TGFbeta-2 showed high collagen type II expression and high GAG/DNA production regardless of which expansion medium had been used. However, chondrocytes expanded in SFM with 100 ng/mL FGF2 resulted in less positive cells for collagen type I and 11-fibrau (a fibroblast membrane marker). The present study shows that it is possible to use serum-free medium for tissue engineering of cartilage. Expansion of immature ear chondrocytes in SFM supplemented with high-concentration FGF2 resulted in high cell numbers, which in addition had better redifferentiation capacity than cells expanded in medium with 10% serum.

  13. Methanol-Tolerant Platinum-Palladium Catalyst Supported on Nitrogen-Doped Carbon Nanofiber for High Concentration Direct Methanol Fuel Cells

    Directory of Open Access Journals (Sweden)

    Jiyoung Kim

    2016-08-01

    Full Text Available Pt-Pd catalyst supported on nitrogen-doped carbon nanofiber (N-CNF was prepared and evaluated as a cathode electrode of the direct methanol fuel cell (DMFC. The N-CNF, which was directly synthesized by the catalytic chemical vapor deposition from acetonitrile at 640 °C, was verified as having a change of electrochemical surface properties such as oxygen reduction reaction (ORR activities and the electrochemical double layer compared with common carbon black (CB. To attain the competitive oxygen reduction reaction activity with methanol tolerance, the Pt and Pd metals were supported on the CB or the N-CNF. The physical and electrochemical characteristics of the N-CNF–supported Pt-Pd catalyst were examined and compared with catalyst supported on the CB. In addition, DMFC single cells using these catalysts as the cathode electrode were applied to obtain I-V polarization curves and constant current operating performances with high-concentration methanol as the fuel. Pt-Pd catalysts had obvious ORR activity even in the presence of methanol. The higher power density was obtained at all the methanol concentrations when it applied to the membrane electrode assembly (MEA of the DMFC. When the N-CNF is used as the catalyst support material, a better performance with high-concentration methanol is expected.

  14. High concentration of branched-chain amino acids promotes oxidative stress, inflammation and migration of human peripheral blood mononuclear cells via mTORC1 activation.

    Science.gov (United States)

    Zhenyukh, Olha; Civantos, Esther; Ruiz-Ortega, Marta; Sánchez, Maria Soledad; Vázquez, Clotilde; Peiró, Concepción; Egido, Jesús; Mas, Sebastián

    2017-03-01

    Leucine, isoleucine and valine are essential aminoacids termed branched-chain amino acids (BCAA) due to its aliphatic side-chain. In several pathological and physiological conditions increased BCAA plasma concentrations have been described. Elevated BCAA levels predict insulin resistance development. Moreover, BCAA levels higher than 2mmol/L are neurotoxic by inducing microglial activation in maple syrup urine disease. However, there are no studies about the direct effects of BCAA in circulating cells. We have explored whether BCAA could promote oxidative stress and pro-inflammatory status in peripheral blood mononuclear cells (PBMCs) obtained from healthy donors. In cultured PBMCs, 10mmol/L BCAA increased the production of reactive oxygen species (ROS) via both NADPH oxidase and the mitochondria, and activated Akt-mTOR signalling. By using several inhibitors and activators of these molecular pathways we have described that mTOR activation by BCAA is linked to ROS production and mitochondrial dysfunction. BCAA stimulated the activation of the redox-sensitive transcription factor NF-κB, which resulted in the release of pro-inflammatory molecules, such as interleukin-6, tumor necrosis factor-α, intracellular adhesion molecule-1 or CD40L, and the migration of PBMCs. In conclusion, elevated BCAA blood levels can promote the activation of circulating PBMCs, by a mechanism that involving ROS production and NF-κB pathway activation. These data suggest that high concentrations of BCAA could exert deleterious effects on circulating blood cells and therefore contribute to the pro-inflammatory and oxidative status observed in several pathophysiological conditions.

  15. Diverse microbial species survive high ammonia concentrations

    Science.gov (United States)

    Kelly, Laura C.; Cockell, Charles S.; Summers, Stephen

    2012-04-01

    Planetary protection regulations are in place to control the contamination of planets and moons with terrestrial micro-organisms in order to avoid jeopardizing future scientific investigations relating to the search for life. One environmental chemical factor of relevance in extraterrestrial environments, specifically in the moons of the outer solar system, is ammonia (NH3). Ammonia is known to be highly toxic to micro-organisms and may disrupt proton motive force, interfere with cellular redox reactions or cause an increase of cell pH. To test the survival potential of terrestrial micro-organisms exposed to such cold, ammonia-rich environments, and to judge whether current planetary protection regulations are sufficient, soil samples were exposed to concentrations of NH3 from 5 to 35% (v/v) at -80°C and room temperature for periods up to 11 months. Following exposure to 35% NH3, diverse spore-forming taxa survived, including representatives of the Firmicutes (Bacillus, Sporosarcina, Viridibacillus, Paenibacillus, Staphylococcus and Brevibacillus) and Actinobacteria (Streptomyces). Non-spore forming organisms also survived, including Proteobacteria (Pseudomonas) and Actinobacteria (Arthrobacter) that are known to have environmentally resistant resting states. Clostridium spp. were isolated from the exposed soil under anaerobic culture. High NH3 was shown to cause a reduction in viability of spores over time, but spore morphology was not visibly altered. In addition to its implications for planetary protection, these data show that a large number of bacteria, potentially including spore-forming pathogens, but also environmentally resistant non-spore-formers, can survive high ammonia concentrations.

  16. Soret Effect Study on High-Pressure CO2-Water Solutions Using UV-Raman Spectroscopy and a Concentric-Tube Optical Cell

    Energy Technology Data Exchange (ETDEWEB)

    Windisch, Charles F.; McGrail, B. Peter; Maupin, Gary D.

    2012-01-01

    Spatially resolved deep-UV Raman spectroscopy was applied to solutions of CO2 and H2O (or D2O), which were subject to a temperature gradient in a thermally regulated high-pressure concentric-tube Raman cell in an attempt to measure a Soret effect in the vicinity of the critical point of CO2. Although Raman spectra of solutions of CO2 dissolved in D2O at 10 MPa and temperatures near the critical point of CO2 had adequate signal-to-noise and spatial resolution to observe a Soret effect with a Soret coefficient with magnitude of |ST| > 0.03, no evidence for an effect of this size was obtained for applied temperature gradients up to 19oC. The presence of 1 M NaCl did not make a difference. In contrast, the concentration of CO2 dissolved in H2O was shown to vary significantly across the temperature gradient when excess CO2 was present, but the results could be explained simply by the variation in CO2 solubility over the temperature range and not to kinetic factors. For mixtures of D2O dissolved in scCO2 at 10 MPa and temperatures close to the critical point of CO2, the Raman peaks for H2O were too weak to measure with confidence even at the limit of D2O solubility.

  17. High-efficiency thin and compact concentrator photovoltaics using micro-solar cells with via-holes sandwiched between thin lens-array and circuit board

    Science.gov (United States)

    Itou, Akihiro; Asano, Tetsuya; Inoue, Daijiro; Arase, Hidekazu; Matsushita, Akio; Hayashi, Nobuhiko; Futakuchi, Ryutaro; Inoue, Kazuo; Yamamoto, Masaki; Fujii, Eiji; Nakagawa, Tohru; Anda, Yoshiharu; Ishida, Hidetoshi; Ueda, Tetsuzo; Fidaner, Onur; Wiemer, Michael; Ueda, Daisuke

    2014-01-01

    We have developed a compact concentrator photovoltaic (CPV) module that comprises micro-solar cells with an area of ≈0.6 × 0.6 mm2 sandwiched between a 20-mm-thick lens array and a 1-mm-thick circuit board with no air gap. To establish electrical connections between the circuit board and the micro-solar cells, we developed a micro-solar cell with positive and negative electrodes on the lower face of the cell. In this study, we demonstrated the photovoltaic performance of the micro-solar cell closely approaches that of the standard solar cell measuring ≈5 × 5 mm2 commonly used in conventional CPVs under concentrated illumination. Our study showed that the negative effect on PV performance of perimeter carrier recombination in the micro-solar cell was insignificant under concentrated illumination. Finally, we assembled our micro-solar cells into a CPV module and achieved the module energy conversion efficiency of 34.7% under outdoor solar illumination.

  18. Fatal outcome in bacteremia is characterized by high plasma cell free DNA concentration and apoptotic DNA fragmentation: a prospective cohort study.

    Directory of Open Access Journals (Sweden)

    Reetta Huttunen

    Full Text Available INTRODUCTION: Recent studies have shown that apoptosis plays a critical role in the pathogenesis of sepsis. High plasma cell free DNA (cf-DNA concentrations have been shown to be associated with sepsis outcome. The origin of cf-DNA is unclear. METHODS: Total plasma cf-DNA was quantified directly in plasma and the amplifiable cf-DNA assessed using quantitative PCR in 132 patients with bacteremia caused by Staphylococcus aureus, Streptococcus pneumoniae, ß-hemolytic streptococcae or Escherichia coli. The quality of cf-DNA was analyzed with a DNA Chip assay performed on 8 survivors and 8 nonsurvivors. Values were measured on days 1-4 after positive blood culture, on day 5-17 and on recovery. RESULTS: The maximum cf-DNA values on days 1-4 (n = 132 were markedly higher in nonsurvivors compared to survivors (2.03 vs 1.26 ug/ml, p1.52 ug/ml remained an independent risk factor for case fatality in a logistic regression model. Qualitative analysis of cf-DNA showed that cf-DNA displayed a predominating low-molecular-weight cf-DNA band (150-200 bp in nonsurvivors, corresponding to the size of the apoptotic nucleosomal DNA. cf-DNA concentration showed a significant positive correlation with visually graded apoptotic band intensity (R = 0.822, p<0.001. CONCLUSIONS: Plasma cf-DNA concentration proved to be a specific independent prognostic biomarker in bacteremia. cf-DNA displayed a predominating low-molecular-weight cf-DNA band in nonsurvivors corresponding to the size of apoptotic nucleosomal DNA.

  19. Performance of planar heterojunction perovskite solar cells under light concentration

    Science.gov (United States)

    Alnuaimi, Aaesha; Almansouri, Ibraheem; Nayfeh, Ammar

    2016-11-01

    In this work, we present 2D simulation of planar heterojunction perovskite solar cells under high concentration using physics-based TCAD. The performance of planar perovskite heterojunction solar cells is examined up to 1000 suns. We analyze the effect of HTM mobility and band structure, surface recombination velocities at interfaces and the effect of series resistance under concentrated light. The simulation results revealed that the low mobility of HTM material limits the improvement in power conversation efficiency of perovskite solar cells under concentration. In addition, large band offset at perovskite/HTM interface contributes to the high series resistance. Moreover, losses due to high surface recombination at interfaces and the high series resistance deteriorate significantly the performance of perovskite solar cells under concentration.

  20. Performance of planar heterojunction perovskite solar cells under light concentration

    Directory of Open Access Journals (Sweden)

    Aaesha Alnuaimi

    2016-11-01

    Full Text Available In this work, we present 2D simulation of planar heterojunction perovskite solar cells under high concentration using physics-based TCAD. The performance of planar perovskite heterojunction solar cells is examined up to 1000 suns. We analyze the effect of HTM mobility and band structure, surface recombination velocities at interfaces and the effect of series resistance under concentrated light. The simulation results revealed that the low mobility of HTM material limits the improvement in power conversation efficiency of perovskite solar cells under concentration. In addition, large band offset at perovskite/HTM interface contributes to the high series resistance. Moreover, losses due to high surface recombination at interfaces and the high series resistance deteriorate significantly the performance of perovskite solar cells under concentration.

  1. Producing a highly concentrated coal suspension

    Energy Technology Data Exchange (ETDEWEB)

    Mokudzu, K.; Atsudzima, T.; Kiyedzuka, Y.

    1983-06-03

    Coal from wet and dry grinding is loaded into a mixer with a mixer arm with the acquisition of a highly concentrated suspension. Foamers (for instance, alkylbenzolsulfonate) and foam stabilizers (for instance diethanolamide of lauric acid) are added in a ratio of 10 to (2 to 5). The high fluidity of the suspension is maintained by injecting air into the suspension and an 80 percent concentration of the suspension is achieved.

  2. Effect of impurity doping concentration on solar cell output

    Science.gov (United States)

    Iles, P. A.; Soclof, S. I.

    1975-01-01

    Experimental measurements were made of solar cell and related photovoltaic parameters for silicon with high concentrations of dopant impurities. The cell output peaked for doping levels around 10 to the 17th power per cu cm. Independent measurements of diffusion length and open circuit voltage at high doping levels showed severe reductions at concentrations above 10 to the 18th power per cu cm. Theoretical reasons are given to explain these reductions. Indication is given of the problems requiring solution before increased cell output can be achieved at high doping levels.

  3. Membrane-bound steel factor maintains a high local concentration for mouse primordial germ cell motility, and defines the region of their migration.

    Directory of Open Access Journals (Sweden)

    Ying Gu

    Full Text Available Steel factor, the protein product of the Steel locus in the mouse, is a multifunctional signal for the primordial germ cell population. We have shown previously that its expression accompanies the germ cells during migration to the gonads, forming a "travelling niche" that controls their survival, motility, and proliferation. Here we show that these functions are distributed between the alternatively spliced membrane-bound and soluble forms of Steel factor. The germ cells normally migrate as individuals from E7.5 to E11.5, when they aggregate together in the embryonic gonads. Movie analysis of Steel-dickie mutant embryos, which make only the soluble form, at E7.5, showed that the germ cells fail to migrate normally, and undergo "premature aggregation" in the base of the allantois. Survival and directionality of movement is not affected. Addition of excess soluble Steel factor to Steel-dickie embryos rescued germ cell motility, and addition of Steel factor to germ cells in vitro showed that a fourfold higher dose was required to increase motility, compared to survival. These data show that soluble Steel factor is sufficient for germ cell survival, and suggest that the membrane-bound form provides a higher local concentration of Steel factor that controls the balance between germ cell motility and aggregation. This hypothesis was tested by addition of excess soluble Steel factor to slice cultures of E11.5 embryos, when migration usually ceases, and the germ cells aggregate. This reversed the aggregation process, and caused increased motility of the germ cells. We conclude that the two forms of Steel factor control different aspects of germ cell behavior, and that membrane-bound Steel factor controls germ cell motility within a "motility niche" that moves through the embryo with the germ cells. Escape from this niche causes cessation of motility and death by apoptosis of the ectopic germ cells.

  4. Mechanically stacked concentrator tandem solar cells

    Science.gov (United States)

    Andreev, V. M.; Rumyantsev, V. D.; Karlina, L. B.; Kazantsev, A. B.; Khvostikov, V. P.; Shvarts, M. Z.; Sorokina, S. V.

    1995-01-01

    Four-terminal mechanically stacked solar cells were developed for advanced space arrays with line-focus reflective concentrators. The top cells are based on AlGaAs/GaAs multilayer heterostructures prepared by low temperature liquid phase epitaxy. The bottom cells are based on heteroepitaxial InP/InGaAs liquid phase epitaxy or on homo-junction GaSb, Zn-diffused structures. The sum of the highest reached efficiencies of the top and bottom cells is 29.4 percent. The best four-terminal tandems have an efficiency of 27 to 28 percent. Solar cells were irradiated with 1 MeV electrons and their performances were determined as a function of fluence up to 10(exp 16) cm(exp-2). It was shown that the radiation resistance of developed tandem cells is similar to the most radiative stable AlGaAs/GaAs cells with a thin p-GaAs photoactive layer.

  5. High concentration of calcium ions in Golgi apparatus

    Institute of Scientific and Technical Information of China (English)

    XUESHAOBAI; M.ROBERTNICOUD; 等

    1994-01-01

    The interphase NIH3T3 cells were vitally fluorescentstained with calcium indicator fluo-3 and Glogi probe C6-NBD-ceramide,and then the single cells were examined by laser scanning confocal microscopy(LSCFM) for subcellular distributions of Ca2+ and the location of Golgi apparatus.In these cells,the intracellular Ca2+ were found to be highly concentrated in the Golgi apparatus.The changes of distribution of cytosolic high Ca2+ region and the Golgi apparatus coincided with the cell cycle phase.In calcium free medium,when the plasma membrane of the cells which had been loaded with fluo-3/AM were permeated by digitonin,the fluorescence of the Golgi region decreased far less than that of the cytosol.Our results indicated that the Glogi lumen retained significantly high concentration of free calcium.

  6. Effects of glucocorticoids on the growth and chemosensitivity of carcinoma cells are heterogeneous and require high concentration of functional glucocorticoid receptors

    Institute of Scientific and Technical Information of China (English)

    Yen-Shen Lu; Huang-Chun Lien; Pei-Yen Yeh; Kun-Huei Yeh; Min-Liang Kuo; Sung-Hsin Kuo; Ann-Lii Cheng

    2005-01-01

    AIM: To determine how glucocorticoids (GCs) may affect the growth and chemosensitivity of common carcinoma cells.METHODS: The effect of dexamethasone (DEX) on growth and chemosensitivity was assessed in 14 carcinoma cell lines. The function of GC receptors (GR) was assessed by MMTV reporter assay. Overexpression of GR was done by in vitro transfection and expression of a GR-expressing vector. Immunohistochemical stain of tissues and cells were done by PA1-511A, an anti-GR monoclonal antibody.RESULTS: DEX inhibited cell growth of four (MCF-7, MCF-7/MXR1, MCF-7/TPT300, and HeLa), increased cisplatin cytotoxicity of one (SiHa), and decreased cisplatin cytotoxicity of two (H460 and Hep3B) cell lines. The GR content of the seven cell lines affected by DEX was significantly higher than those of the seven cell lines unaffected by DEX(5.2±2.5×104 sites/cell vs 1.3±1.4×104 sites/cell, P= 0.005).Only two DEX-unresponsive cell lines (NPC-TW01 and NPCTW04) contained high GR amounts in the range (1.9-8.1×104sites/cell) of the seven DEX-responsive cell lines. The GR function of NPC-TW01 and NPC-TW04, however, was found to be impaired. The importance of high cellular amount of GR in mediating DEX susceptibility of the cells was further exemplified by GR dose-dependent drug resistance to cisplatin of AGS, a cell line with low GR content and was unaffected by DEX before transfection of GR-expressing vector. Immunohistochemical studies of human cancer tissues showed that 5 of the 45 (11.1%) breast cancer and 43 of the 85 (50.6%) non-small cell lung cancer had high GR contents at the ranges of the GC-responsive carcinoma cell lines.CONCLUSION: The growth and chemosensitivity of human carcinomas with high GR contents may be affected by GC. However, in light of the heterogeneous and even contradictive effects of GC on these cells, routine examination of GR contents of human carcinoma tissues may not be clinically useful until other markers that help predict the ultimate effect of

  7. InP concentrator solar cells for space applications

    Science.gov (United States)

    Ward, J. S.; Wanlass, M. W.; Coutts, T. J.; Emery, K. A.

    1991-01-01

    The design, fabrication, and characterization of high-performance, n(+)/p InP shallow-homojunction (SHJ) concentrator solar cells is described. The InP device structures were grown by atmospheric-pressure metalorganic vapor phase epitaxy (APMOVPE). A preliminary assessment of the effects of grid collection distance and emitter sheet resistance on cell performance is presented. At concentration ratios of over 100, cells with AM0 efficiencies in excess of 21 percent at 25 C and 19 percent at 80 C are reported. These results indicate that high-efficiency InP concentrator cells can be fabricated using existing technologies. The performance of these cells as a function of temperature is discussed, and areas for future improvement are outlined.

  8. High-efficiency organic solar concentrators for photovoltaics.

    Science.gov (United States)

    Currie, Michael J; Mapel, Jonathan K; Heidel, Timothy D; Goffri, Shalom; Baldo, Marc A

    2008-07-11

    The cost of photovoltaic power can be reduced with organic solar concentrators. These are planar waveguides with a thin-film organic coating on the face and inorganic solar cells attached to the edges. Light is absorbed by the coating and reemitted into waveguide modes for collection by the solar cells. We report single- and tandem-waveguide organic solar concentrators with quantum efficiencies exceeding 50% and projected power conversion efficiencies as high as 6.8%. The exploitation of near-field energy transfer, solid-state solvation, and phosphorescence enables 10-fold increases in the power obtained from photovoltaic cells, without the need for solar tracking.

  9. Cellulase Inhibition by High Concentrations of Monosaccharides

    DEFF Research Database (Denmark)

    Hsieh, Chia-Wen; Cannella, David; Jørgensen, Henning

    2014-01-01

    that low free water availability contributes to cellulase inhibition. Of the hydrolytic enzymes involved, those acting on the cellulose substrate, that is, exo- and endoglucanases, were the most inhibited. The β -glucosidases were shown to be less sensitive to high monosaccharide concentrations except...

  10. High plasma fibrinogen concentration and platelet count unfavorably impact survival in non-small cell lung cancer patients with brain metastases

    Institute of Scientific and Technical Information of China (English)

    Jian-Fei Zhu; Ling Cai; Xue-Wen Zhang; Yin-Sheng Wen; Xiao-Dong Su; Tie-Hua Rong; Lan-Jun Zhang

    2014-01-01

    High expression of fibrinogen and platelets are often observed in non-smal celllung cancer (NSCLC) patients with local regional or distant metastasis. However, the role of these factors remains unclear. The aims of this study were to evaluate the prognostic significance of plasma fibrinogen concentration and platelet count, as wel as to determine the overal survival of NSCLC patients with brain metastases. A total of 275 NSCLC patients with brain metastasis were enrolled into this study. Univariate analysis showed that high plasma fibrinogen concentration was associated with age≥65 years (P = 0.011), smoking status (P = 0.009), intracranial symptoms (P = 0.022), clinical T category (P = 0.010), clinical N category (P = 0.003), increased partial thromboplastin time (P < 0.001), and platelet count (P < 0.001). Patients with low plasma fibrinogen concentration demonstrated longer overall survival compared with those with high plasma fibrinogen concentration (median, 17.3 months versus 11.1 months;P≤0.001). A similar result was observed for platelet counts (median, 16.3 months versus 11.4 months;P = 0.004). Multivariate analysis showed that both plasma fibrinogen concentration and platelet count were independent prognostic factors for NSCLC with brain metastases (R2 = 1.698,P < 0.001 andR2 = 1.699,P < 0.001, respectively). Our results suggest that high plasma fibrinogen concentration and platelet count indicate poor prognosis for NSCLC patients with brain metastases. Thus, these two biomarkers might be independent prognostic predictors for this subgroup of NSCLC patients.

  11. High-dimensional entanglement concentration of twisted photon pairs High-dimensional entanglement concentration

    Science.gov (United States)

    Chen, L. X.; Wu, Q. P.

    2012-10-01

    Recently, Dada et al. reported on the experimental entanglement concentration and violation of generalized Bell inequalities with orbital angular momentum (OAM) [Nat. Phys. 7, 677 (2011)]. Here we demonstrate that the high-dimensional entanglement concentration can be performed in arbitrary OAM subspaces with selectivity. Instead of violating the generalized Bell inequalities, the working principle of present entanglement concentration is visualized by the biphoton OAM Klyshko picture, and its good performance is confirmed and quantified through the experimental Shannon dimensionalities after concentration.

  12. ON-LINE MONITORING OF BIOMASS CONCENTRATION BASED ON A CAPACITANCE SENSOR: ASSESSING THE METHODOLOGY FOR DIFFERENT BACTERIA AND YEAST HIGH CELL DENSITY FED-BATCH CULTURES

    Directory of Open Access Journals (Sweden)

    A. C. L. Horta

    2015-12-01

    Full Text Available Abstract The performance of an in-situ capacitance sensor for on-line monitoring of biomass concentration was evaluated for some of the most important microorganisms in the biotechnology industry: Escherichia coli, Saccharomyces cerevisiae, Pichia pastoris and Bacillus megaterium. A total of 33 batch and fed-batch cultures were carried out in a bench-scale bioreactor and biomass formation trends were followed by dielectric measurements during the growth phase as well as the induction phase, for 5 recombinant E. coli strains. Permittivity measurements and viable cellular concentrations presented a linear correlation for all the studied conditions. In addition, the permittivity signal was further used for inference of the cellular growth rate. The estimated specific growth rates mirrored the main trends of the metabolic states of the different cells and they can be further used for setting-up control strategies in fed-batch cultures.

  13. Simulation of an electrowetting solar concentration cell

    Science.gov (United States)

    Khan, Iftekhar; Rosengarten, Gary

    2015-09-01

    Electrowetting control of liquid lenses has emerged as a novel approach for solar tracking and concentration. Recent studies have demonstrated the concept of steering sunlight using thin electrowetting cells without the use of any bulky mechanical equipment. Effective application of this technique may facilitate designing thin and flat solar concentrators. Understanding the behavior of liquid-liquid and liquid-solid interface of the electrowetting cell through trial and error experimental processes is not efficient and is time consuming. In this paper, we present a simulation model to predict the liquid-liquid and liquid-solid interface behavior of electrowetting cell as a function of various parameters such as applied voltage, dielectric constant, cell size etc. We used Comsol Multiphysics simulations incorporating experimental data of different liquids. We have designed both two dimensional and three dimensional simulation models, which predict the shape of the liquid lenses. The model calculates the contact angle using the Young-Lippman equation and uses a moving mesh interface to solve the Navier-stokes equation with Navier slip wall boundary condition. Simulation of the electric field from the electrodes is coupled to the Young-Lippman equation. The model can also be used to determine operational characteristics of other MEMS electrowetting devices such as electrowetting display, optical switches, electronic paper, electrowetting Fresnel lens etc.

  14. Impact of the Peltier effect on concentrating photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Ari, N. [School of Mechanical Engineering, Tel Aviv University, Tel Aviv 69978 (Israel); Porter School of Environmental Studies, Tel Aviv University, Tel Aviv 69978 (Israel); Kribus, A. [School of Mechanical Engineering, Tel Aviv University, Tel Aviv 69978 (Israel)

    2010-12-15

    Photovoltaic cells convert most of the absorbed photon energy to heat. Removal of the heat by thermal conduction creates a heat flux that is significant in concentrating photovoltaic (CPV) cells subject to high incident radiation flux. The Peltier effect interaction of this heat flux and the electrical current in the cell can either increase or decrease the temperature gradient within the cell. Here we show that the Peltier effect contributes to a measurable change in the temperature gradient in Ge-based CPV cells and therefore this effect should be considered in cell modelling. The effect may also have an impact on the temperature gradient of other photovoltaic cells and of other high power optoelectronic devices. (author)

  15. High-concentration planar microtracking photovoltaic system exceeding 30% efficiency

    Science.gov (United States)

    Price, Jared S.; Grede, Alex J.; Wang, Baomin; Lipski, Michael V.; Fisher, Brent; Lee, Kyu-Tae; He, Junwen; Brulo, Gregory S.; Ma, Xiaokun; Burroughs, Scott; Rahn, Christopher D.; Nuzzo, Ralph G.; Rogers, John A.; Giebink, Noel C.

    2017-08-01

    Prospects for concentrating photovoltaic (CPV) power are growing as the market increasingly values high power conversion efficiency to leverage now-dominant balance of system and soft costs. This trend is particularly acute for rooftop photovoltaic power, where delivering the high efficiency of traditional CPV in the form factor of a standard rooftop photovoltaic panel could be transformative. Here, we demonstrate a fully automated planar microtracking CPV system solar cell at >660× concentration ratio over a 140∘ full field of view. In outdoor testing over the course of two sunny days, the system operates automatically from sunrise to sunset, outperforming a 17%-efficient commercial silicon solar cell by generating >50% more energy per unit area per day in a direct head-to-head competition. These results support the technical feasibility of planar microtracking CPV to deliver a step change in the efficiency of rooftop solar panels at a commercially relevant concentration ratio.

  16. Impact of the Thomson effect on concentrating photovoltaic cells

    Energy Technology Data Exchange (ETDEWEB)

    Ari, Nimrod [School of Mechanical Engineering, Tel Aviv University, Tel Aviv 69978 (Israel); Porter School of Environmental Studies, Tel Aviv University, Tel Aviv 69978 (Israel); Kribus, Abraham [School of Mechanical Engineering, Tel Aviv University, Tel Aviv 69978 (Israel)

    2010-08-15

    Photovoltaic cells convert most of the absorbed photon energy to heat. Removal of the heat by thermal conduction creates a temperature gradient that is significant in concentrating photovoltaic (CPV) cells subject to high incident radiation flux. The Thomson effect interaction between this temperature gradient and the electrical current in the cell can either increase or decrease the electrical power output of the cell. Here we show that the Thomson effect has a non-negligible impact on the conversion efficiency of Ge-based CPV cells, which is comparable to the impact of typical series resistance, and therefore this effect should be considered in cell modeling. The effect may also have a significant impact on the performance of other high power optoelectronic devices. (author)

  17. Reversible degradation of inverted organic solar cells by concentrated sunlight.

    Science.gov (United States)

    Tromholt, Thomas; Manor, Assaf; Katz, Eugene A; Krebs, Frederik C

    2011-06-03

    Concentrated sunlight was used to study the performance response of inverted P3HT:PCBM organic solar cells after exposure to high intensity sunlight. Correlations of efficiency as a function of solar intensity were established in the range of 0.5-15 suns at three different stages: for a pristine cell, after 30 min exposure at 5 suns and after 30 min of rest in the dark. High intensity exposure introduced a major performance decrease for all solar intensities, followed by a partial recovery of the lost performance over time: at 1 sun only 6% of the initial performance was conserved after the high intensity exposure, while after rest the performance had recovered to 60% of the initial value. The timescale of the recovery effect was studied by monitoring the cell performance at 1 sun after high intensity exposure. This showed that cell performance was almost completely restored after 180 min. The transient state is believed to be a result of the breakdown of the diode behaviour of the ZnO electron transport layer by O(2) desorption, increasing the hole conductivity. These results imply that accelerated degradation of organic solar cells by concentrated sunlight is not a straightforward process, and care has to be taken to allow for a sound accelerated lifetime assessment based on concentrated sunlight.

  18. Reversible degradation of inverted organic solar cells by concentrated sunlight

    DEFF Research Database (Denmark)

    Tromholt, Thomas; Manor, Assaf; Katz, Eugene A

    2011-01-01

    Concentrated sunlight was used to study the performance response of inverted P3HT:PCBM organic solar cells after exposure to high intensity sunlight. Correlations of efficiency as a function of solar intensity were established in the range of 0.5–15 suns at three different stages: for a pristine....... The transient state is believed to be a result of the breakdown of the diode behaviour of the ZnO electron transport layer by O2 desorption, increasing the hole conductivity. These results imply that accelerated degradation of organic solar cells by concentrated sunlight is not a straightforward process...... cell, after 30 min exposure at 5 suns and after 30 min of rest in the dark. High intensity exposure introduced a major performance decrease for all solar intensities, followed by a partial recovery of the lost performance over time: at 1 sun only 6% of the initial performance was conserved after...

  19. 42% 500X Bi-Facial Growth Concentrator Cells

    Science.gov (United States)

    Wojtczuk, S.; Chiu, P.; Zhang, X.; Pulver, D.; Harris, C.; Siskavich, B.

    2011-12-01

    Data are presented from three-junction concentrator photovoltaic cells using a new cell architecture (1.9 eV InGaP top cell lattice-matched to a 1.42 eV GaAs middle cells on one side of a infrared-transparent GaAs wafer with a lattice-mismatched 0.95 eV InGaAs bottom cell grown isolated on the wafer backside). The cell uses a new epitaxial bifacial growth (BFG) technique. The impetus is to replace the 0.67 eV Ge bottom cell in the standard three junction InGaP/GaAs/Ge tandems with a higher bandgap 0.95 eV InGaAs cell that boosts the bottom cell voltage by about 40% while maintaining a simple high-yield cell process without use of complex large area epitaxial liftoff or wafer bonding steps used to make similar cell stacks. Efficiency was independently-verified by NREL for a 1 cm×1 cm cell (42.3% at 406 suns, with Voc 3.452V, 87.1% FF and 1xJsc of 14.07 mA/cm2, at 25 °C AM1.5D, 100 mW/cm2), which was the world record at the time of the CPV-7 conference. No degradation was seen during concentrated solar operation after a 2000 hr 165C burn-in and PbSn solder tests. Average efficiency of 1 cm2 cells designed for 500 suns at 1018 suns was 40.5% (Spire test, 25 °C, spectrally corrected flash simulator). Measured efficiency temperature coefficient for gen2 cells is -0.06%/°C, similar to InGaP/GaAs/Ge tandems.

  20. Physical chemistry of highly concentrated emulsions.

    Science.gov (United States)

    Foudazi, Reza; Qavi, Sahar; Masalova, Irina; Malkin, Alexander Ya

    2015-06-01

    This review explores the physics underlying the rheology of highly concentrated emulsions (HCEs) to determine the relationship between elasticity and HCE stability, and to consider whether it is possible to describe all physicochemical properties of HCEs on the basis of a unique physical approach. We define HCEs as emulsions with a volume fraction above the maximum closest packing fraction of monodisperse spheres, φm=0.74, even if droplets are not of polyhedron shape. The solid-like rheological behavior of HCEs is characterized by yield stress and elasticity, properties which depend on droplet polydispersity and which are affected by caging at volume fractions about the jamming concentration, φj. A bimodal size distribution in HCEs diminishes caging and facilitates droplet movement, resulting in HCEs with negligible yield stress and no plateau in storage modulus. Thermodynamic forces automatically move HCEs toward the lowest free energy state, but since interdroplet forces create local minimums - points beyond which free energy temporarily increases before it reaches the global minimum of the system - the free energy of HCEs will settle at a local minimum unless additional energy is added. Several attempts have been undertaken to predict the elasticity of HCEs. In many cases, the elastic modulus of HCEs is higher than the one predicted from classical models, which only take into account spatial repulsion (or simply interfacial energy). Improved models based on free energy calculation should be developed to consider the disjoining pressure and interfacial rheology in addition to spatial repulsion. The disjoining pressure and interfacial viscoelasticity, which result in the deviation of elasticity from the classical model, can be regarded as parameters for quantifying the stability of HCEs. Copyright © 2015 Elsevier B.V. All rights reserved.

  1. GaAs solar cells for concentrator systems in space

    Science.gov (United States)

    Loo, R. Y.; Knechtli, R. C.; Kamath, G. S.

    1983-01-01

    Cells for operation in space up to more than 100 suns were made, and an AMO efficiency of 21% at 100 suns with these cells was obtained. The increased efficiency resulted not only from the higher open circuit voltage associated with the higher light intensity (higher short circuit current); it also benefitted from the increase in fill factor caused by the lower relative contribution of the generation recombination current to the forward bias current when the cell's operating current density is increased. The experimental cells exhibited an AMO efficiency close to 16% at 200 C. The prospect of exploiting this capability for the continuous annealing of radiation damage or for high temperature missions (e.g., near Sun missions) remains therefore open. Space systems with concentration ratios on the order of 100 suns are presently under development. The tradeoff between increased concentration ratio and increased loss due to the cell's series resistance remains attractive even for space applications at a solar concentrator ratio of 100 suns. In the design of contact configuration with low enough series resistance for such solar concentration ratios, the shallow junction depth needed for good radiation hardness and the thin AlGaAs layer thickness needed to avoid excessive optical absorption losses have to be retained.

  2. Reversible degradation of inverted organic solar cells by concentrated sunlight

    OpenAIRE

    Tromholt, Thomas; Manor, Assaf; Katz, Eugene A.; Frederik C. Krebs

    2011-01-01

    Concentrated sunlight was used to study the performance response of inverted P3HT:PCBM organic solar cells after exposure to high intensity sunlight. Correlations of efficiency as a function of solar intensity were established in the range of 0.5–15 suns at three different stages: for a pristine cell, after 30 min exposure at 5 suns and after 30 min of rest in the dark. High intensity exposure introduced a major performance decrease for all solar intensities, followed by a partial recovery of...

  3. The Effect of Initial Cell Concentration on Xylose Fermentation by Pichia stipitis

    Science.gov (United States)

    Agbogbo, Frank K.; Coward-Kelly, Guillermo; Torry-Smith, Mads; Wenger, Kevin; Jeffries, Thomas W.

    Xylose was fermented using Pichia stipitis CBS 6054 at different initial cell concentrations. A high initial cell concentration increased the rate of xylose utilization, ethanol formation, and the ethanol yield. The highest ethanol concentration of 41.0 g/L and a yield of 0.38 g/g was obtained using an initial cell concentration of 6.5 g/L. Even though more xylitol was produced when the initial cell concentrations were high, cell density had no effect on the final ethanol yield. A two-parameter mathematical model was used to predict the cell population dynamics at the different initial cell concentrations. The model parameters, a and b correlate with the initial cell concentrations used with an R 2 of 0.99.

  4. High-Temperature, High-Concentration Solar Thermoelectric Generators

    Science.gov (United States)

    Warren, Emily; Baranowski, Lauryn; Olsen, Michele; Ndione, Paul; Netter, Judy; Goodrich, Alan; Gray, Matthew; Parilla, Philip; Ginley, David; Toberer, Eric

    2014-03-01

    Solar thermoelectric generators (STEGs) powered with concentrated solar energy have potential for use as primary energy converters or as topping-cycles for more conventional concentrated solar power (CSP) technologies. Modeling based on current record modules from JPL suggests thermoelectric efficiencies of 18 % could be experimentally expected with a temperature gradient of 1000 - 100°C. Integrating these state-of-the-art TEGs with a concentrating solar receiver requires simultaneous optimization of optical, thermal, and thermoelectric systems. This talk will discuss the modeling, design, and experimental testing of STEG devices under concentrated sunlight. We have developed a model that combines thermal circuit modeling with optical ray tracing to design selective absorber coatings and cavities to minimize radiation losses from the system. We have fabricated selective absorber coatings and demonstrated that these selective absorber films can minimize blackbody radiation losses at high temperature and are stable after thermal cycling to 1000°C. On-sun testing of STEG devices and thermal simulators is ongoing and preliminary results will be discussed.

  5. Horizontally staggered lightguide solar concentrator with lateral displacement tracking for high concentration applications.

    Science.gov (United States)

    Ma, Hongcai; Wu, Lin

    2015-07-10

    We present the design of a horizontally staggered lightguide solar concentrator with lateral displacement tracking for high concentration applications. This solar concentrator consists of an array of telecentric primary concentrators, a horizontally staggered lightguide layer, and a vertically tapered lightguide layer. The primary concentrator is realized by two plano-aspheric lenses with lateral movement and maintains a high F-number over an angle range of ±23.5°. The results of the simulations show that the solar concentrator achieves a high concentration ratio of 500× with ±0.5° of acceptance angle by a single-axis tracker and dual lateral translation stages.

  6. Effects of single and combined cell treatments based on low pH and high concentrations of ethanol on the growth and fermentation of Dekkera bruxellensis and Saccharomyces cerevisiae.

    Science.gov (United States)

    Bassi, Ana Paula Guarnieri; da Silva, Jéssica Carolina Gomes; Reis, Vanda Renata; Ceccato-Antonini, Sandra Regina

    2013-09-01

    The alcoholic fermentation in Brazil displays some peculiarities because the yeast used is recycled in a non-aseptic process. After centrifugation, the cells are treated with acid to control the bacterial growth. However, it is difficult to manage the indigenous yeasts without affecting the main culture of Saccharomyces cerevisiae. This work evaluated how the cell treatment could be modified to combat contaminant yeasts based on the differential sensitivities to low pH and high concentrations of ethanol displayed by an industrial strain of S. cerevisiae and three strains of Dekkera bruxellensis, which are common contaminant yeasts in Brazilian fermentation processes. The tests were initially performed in rich medium with a low pH or a high concentration of ethanol to analyse the yeast growth profile. Then, the single and combined effects of low pH and ethanol concentration on the yeast cell viability were evaluated under non-proliferative conditions. The effects on the fermentation parameters were also verified. S. cerevisiae grew best when not subjected to the stresses, but this yeast and D. bruxellensis had similar growth kinetics when exposed to a low pH or increased ethanol concentrations. However, the combined treatments of low pH (2.0) and ethanol (11 or 13 %) resulted in a decrease of D. bruxellensis cell viability almost three times higher than of S. cerevisiae, which was only slightly affected by all cell treatments. The initial viability of the treated cells was restored within 8 h of growth in sugar cane juice, with the exception of the combined treatment for D. bruxellensis. The ethanol-based cell treatment, in despite of slowing the fermentation, could decrease and maintain D. bruxellensis population under control while S. cerevisiae was taking over the fermentation along six fermentative cycles. These results indicate that it may be possible to control the growth of D. bruxellensis without major effects on S. cerevisiae. The cells could be treated

  7. Mechanism for multiplicity of steady states with distinct cell concentration in continuous culture of mammalian cells.

    Science.gov (United States)

    Yongky, Andrew; Lee, Jongchan; Le, Tung; Mulukutla, Bhanu Chandra; Daoutidis, Prodromos; Hu, Wei-Shou

    2015-07-01

    Continuous culture for the production of biopharmaceutical proteins offers the possibility of steady state operations and thus more consistent product quality and increased productivity. Under some conditions, multiplicity of steady states has been observed in continuous cultures of mammalian cells, wherein with the same dilution rate and feed nutrient composition, steady states with very different cell and product concentrations may be reached. At those different steady states, cells may exhibit a high glycolysis flux with high lactate production and low cell concentration, or a low glycolysis flux with low lactate and high cell concentration. These different steady states, with different cell concentration, also have different productivity. Developing a mechanistic understanding of the occurrence of steady state multiplicity and devising a strategy to steer the culture toward the desired steady state is critical. We establish a multi-scale kinetic model that integrates a mechanistic intracellular metabolic model and cell growth model in a continuous bioreactor. We show that steady state multiplicity exists in a range of dilution rate in continuous culture as a result of the bistable behavior in glycolysis. The insights from the model were used to devise strategies to guide the culture to the desired steady state in the multiple steady state region. The model provides a guideline principle in the design of continuous culture processes of mammalian cells.

  8. Magnetic Cobalt Ferrite Nanocrystals For an Energy Storage Concentration Cell.

    Science.gov (United States)

    Dai, Qilin; Patel, Ketan; Donatelli, Greg; Ren, Shenqiang

    2016-08-22

    Energy-storage concentration cells are based on the concentration gradient of redox-active reactants; the increased entropy is transformed into electric energy as the concentration gradient reaches equilibrium between two half cells. A recyclable and flow-controlled magnetic electrolyte concentration cell is now presented. The hybrid inorganic-organic nanocrystal-based electrolyte, consisting of molecular redox-active ligands adsorbed on the surface of magnetic nanocrystals, leads to a magnetic-field-driven concentration gradient of redox molecules. The energy storage performance of concentration cells is dictated by magnetic characteristics of cobalt ferrite nanocrystal carriers. The enhanced conductivity and kinetics of redox-active electrolytes could further induce a sharp concentration gradient to improve the energy density and voltage switching of magnetic electrolyte concentration cells. © 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  9. 空气中高浓度二氯乙烷对蚕豆根尖细胞遗传毒性研究%The genotoxicity of High-Dose Concentration in the Air on Vicia faba Root Tips Cells

    Institute of Scientific and Technical Information of China (English)

    陈洋; 周小敏; 熊旭辉; 谭广辉; 张琼

    2012-01-01

    Objective To explore the feasibility of micronucleus test of Vicia faba root-tip cell in application of mutation detection caused by air pollutants. Methods This experiment takes available Vicia faba as research objects, which was poisoned by high concentration dichloroethane of simulated indoor air at airtight container. Results With the increasing of concentration, the descending trend of mitotic index and the escalation of average micronucleus rate and chromosome aberration rate had been observed, which showed a conspicuous dose-response relationship. Conclusion Genetic toxic effects of Vicia faba root-tip cell caused by dichloroethane are unquestionable under all experiment concentration. Furthermore, it is possible that the using of micronucleus test in Vicia faba linn root-tip cell for high concentration dichloroethane of indoor air.%目的 探讨将蚕豆根尖微核检测系统(micronucleus,MCN)应用于空气污染物致突变性检测的可行性.方法 以市售蚕豆为材料,在密闭容器中模拟室内空气的高浓度二氯乙烷污染,对蚕豆进行染毒.结果 随着浓度的递增,平均微核率、染色体畸变率逐步上升,有丝分裂指数有下降趋势,表现出明显的剂量效应关系.结论 在实验浓度下,1,2-二氯乙烷有对蚕豆根尖细胞产生遗传毒害效应.应用蚕豆根尖微核技术检测室内高浓度1,2-二氯乙烷污染物是可行的.

  10. An optimized top contact design for solar cell concentrators

    Science.gov (United States)

    Desalvo, Gregory C.; Barnett, Allen M.

    1985-01-01

    A new grid optimization scheme is developed for point focus solar cell concentrators which employs a separated grid and busbar concept. Ideally, grid lines act as the primary current collectors and receive all of the current from the semiconductor region. Busbars are the secondary collectors which pick up current from the grids and carry it out of the active region of the solar cell. This separation of functions leads to a multithickness metallization design, where the busbars are made larger in cross section than the grids. This enables the busbars to carry more current per unit area of shading, which is advantageous under high solar concentration where large current densities are generated. Optimized grid patterns using this multilayer concept can provide a 1.6 to 20 percent increase in output power efficiency over optimized single thickness grids.

  11. An optimized top contact design for solar cell concentrators

    Science.gov (United States)

    Desalvo, Gregory C.; Barnett, Allen M.

    1985-01-01

    A new grid optimization scheme is developed for point focus solar cell concentrators which employs a separated grid and busbar concept. Ideally, grid lines act as the primary current collectors and receive all of the current from the semiconductor region. Busbars are the secondary collectors which pick up current from the grids and carry it out of the active region of the solar cell. This separation of functions leads to a multithickness metallization design, where the busbars are made larger in cross section than the grids. This enables the busbars to carry more current per unit area of shading, which is advantageous under high solar concentration where large current densities are generated. Optimized grid patterns using this multilayer concept can provide a 1.6 to 20 percent increase in output power efficiency over optimized single thickness grids.

  12. Fundamental Limits to Collective Concentration Sensing in Cell Populations

    Science.gov (United States)

    Fancher, Sean; Mugler, Andrew

    2017-02-01

    The precision of concentration sensing is improved when cells communicate. Here we derive the physical limits to concentration sensing for cells that communicate over short distances by directly exchanging small molecules (juxtacrine signaling), or over longer distances by secreting and sensing a diffusive messenger molecule (autocrine signaling). In the latter case, we find that the optimal cell spacing can be large, due to a trade-off between maintaining communication strength and reducing signal cross-correlations. This leads to the surprising result that sparsely packed communicating cells sense concentrations more precisely than densely packed communicating cells. We compare our results to data from a wide variety of communicating cell types.

  13. A new insight to adsorption and accumulation of high lead concentration by exopolymer and whole cells of lead-resistant bacterium Acinetobacter junii L. Pb1 isolated from coal mine dump.

    Science.gov (United States)

    Kushwaha, Anamika; Rani, Radha; Kumar, Sanjay; Thomas, Tarence; David, Arun Alfred; Ahmed, Meraz

    2017-03-11

    A lead-resistant bacterial strain was isolated from coal mine dump and identified as Acinetobacter junii Pb1 on basis of 16S rRNA (ribosomal ribonucleic acid) gene sequencing. The minimum inhibitory concentration of lead for the strain was 16,000 mg l(-1) and it showed antibiotic and multi metal resistance. In aqueous culture, at an initial lead (Pb(II)) concentration of 100 and 500 mg l(-1), lead adsorption and accumulation by the isolate was 100 and 60%, at pH 7 at 30 °C after 48 and 120 h, respectively. The two fractions of exopolysaccharide (EPS), loosely associated EPS (laEPS) and bound EPS (bEPS), and whole cells (devoid of EPS) showed high binding affinity towards Pb(II). The binding affinity of laEPS towards Pb(II) (1071 mg Pb g(-1)) was three times higher than that of bEPS (321.5 mg Pb g(-1)) and 6.5 times higher than that of whole cells (165 mg Pb g(-1)). The binding affinity of EPS and whole cells with Pb(II), reported in the current study, is considerably higher as compared to that reported in the literature, till date. SEM analysis, showed an increase in thickness of cells on exposure to Pb(II) and TEM analysis, revealed its accumulation (interior of cell) and its adsorption (with the external cell surface). The isolate was also found to be positive for indole acetic acid (IAA) and 1-aminocyclopropane-1-carboxylate (ACC) deaminase production which helps in promoting plant growth. Thus, this study provides a new understanding towards Pb(II) uptake by A. junii Pb1, highlighting its potential on the restoration of Pb(II) contaminated repositories.

  14. The effect of cell concentrations from different cell populations on the viability of umbilical blood stem cells.

    Science.gov (United States)

    Hauck-Dlimi, Barbara; Dlimi, Afif; Zimmermann, Robert; Eckstein, Reinhold; Zingsem, Juergen

    2014-01-01

    In addition to bone marrow or peripheral blood derived stem cells, cord blood (CB) is an alternative source for hematopoietic stem cells. This report shows the impact of higher concentrations of leukocytes, mononu- clear cells (MNCs), and CD34-positive cells on the viability of CB derived stem cells after cryopreservation. Statistical analysis of data from 5520 CB units, prepared and cryopreserved from 2003 through 2011, was performed with appropriate software. Cell concentrations for leukocytes, platelets, red blood cells (RBCs), CD34-positive leukocytes, viable leukocytes, and MNCs were determined. The proliferation and differentiation capacity was assessed in cell culture assays. Content of leukocytes, CD34-positive leukocytes, and MNCs decreased after thawing. The recovery rate of colony forming units (CFUs) (29.05%) correlated significantly with leukocytes, platelets, RBCs, MNCs, CD34- positive leukocytes, and viable leukocytes. The recovery rate for erythroblasts (3.33%) correlated significantly with leukocytes, CD34-positive leukocytes, MNCs, and viable leukocytes. In the different cell concentration groups only RBCs showed a negative influence on viability. The concentrations of leukocytes, platelets, and CD34-positive leukocytes before cryopreservation correlated positively with the concentrations of leukocytes, CD34-positive leukocytes, MNCs as well as with the cell viability after thawing. Increased cell concentrations in CB do not limit the recovery of CD34-positive leukocytes nor the viability of leukocytes or the number of CFUs after thawing. On the contrary, CB units with high cell concentrations show a better outcome than units with low cell concentrations. Only RBCs seem to have a negative influence on CB quality.

  15. Silicon concentrator cells in a two-stage photovoltaic system with a concentration factor of 300x

    Energy Technology Data Exchange (ETDEWEB)

    Mohr, A.

    2005-06-15

    In this work a rear contacted silicon concentrator cell was developed for an application in a two stage concentrator photovoltaic system. This system was developed at Fraunhofer ISE some years ago. The innovation of this one-axis tracked system is that it enables a high geometrical concentration of 300x in combination with a high optical efficiency (around 78%) and a large acceptance angle of {+-}23.5 all year through. For this, the system uses a parabolic mirror (40.4x) and a three dimensional second stage consisting of compound parabolic concentrators (CPCs, 7.7x). For the concentrator concept and particularly for an easy cell integration, the rear line contacted concentrator (RLCC) cells with a maximum efficiency of 25% were developed and a hybrid mounting concept for the RLCC cells is presented. The optical performance of different CPC materials was tested and analysed in this work. Finally, small modules consisting of six series interconnected RLCC cells and six CPCs were integrated into the concentrator system and tested outdoor. A system efficiency of 16.2% was reached at around 800 W/m2 direct irradiance under realistic outdoor conditions. (orig.)

  16. Synthesis of Highly Concentrated ZnO Nanorod Sol by Sol-gel Method and their Applications for Inverted Organic Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Kim, Solee; Kim, Young Chai; Oh, Seong-Geun [Hanyang University, Seoul (Korea, Republic of)

    2015-02-15

    The effects of the zinc oxide (ZnO) preparing process on the performance of inverted organic photovoltaic cells (OPVs) were explored. The morphology and size of ZnO nanoparticles were controlled, leading to more efficient charge collection from device and higher electron mobility compared with nanospheres. Nanosized ZnO particles were synthesized by using zinc acetate dihydrate and potassium hydroxide in methanol. Also, water was added into the reaction medium to control the morphology of ZnO nanocrystals from spherical particles to rods, and NH{sub 4}OH was used to prevent the gelation of dispersion. Solution-processed ZnO thin films were deposited onto the ITO/glass substrate by using spin coating process and then ZnO films were used as an electron transport layer in inverted organic photovoltaic cells. The analyses were carried out by using TEM, FE-SEM, AFM, DLS, UV-Vis spectroscopy, current density-voltage characteristics and solar simulator.

  17. High Red Blood Cell Count

    Science.gov (United States)

    Symptoms High red blood cell count By Mayo Clinic Staff A high red blood cell count is an increase in oxygen-carrying cells in your bloodstream. Red blood cells transport oxygen from your lungs to tissues throughout ...

  18. Thermal analysis and test for single concentrator solar cells

    Institute of Scientific and Technical Information of China (English)

    Cui Min; Chen Nuofu; Yang Xiaoli; Wang Yu; Bai Yining; Zhang Xingwang

    2009-01-01

    A thermal model for concentrator solar cells based on energy conservation principles was designed.Under 400X concentration with no cooling aid,the cell temperature would get up to about 1200℃.Metal plates were used as heat sinks for cooling the system,which remarkably reduce the cell temperature.For a fixed concentration ratio,the cell temperature reduced as the heat sink area increased.In order to keep the cell at a constant temperature,the heat sink area needs to increase linearly as a function of the concentration ratio.GaInP/GaAs/Ge triple-junction solar cells were fabricated to verify the model.A cell temperature of 37℃ was measured when using a heat sink at 400X concentratration.

  19. 高浓度抗生素溶液对椎间盘细胞影响的研究%Influences of the high concentrations of cefazolin and clindamycin on the viability and proliferation of nucleus pulposus cell

    Institute of Scientific and Technical Information of China (English)

    张亮; 倪斌; 王静成; 冯新民; 杨建东; 孙钰

    2013-01-01

    [ Objective] To observe the influences of the high concentrations of cefazolin and clindamycin on the viability and proliferation of nucleus pulposus cell. [ Method] NP cells from rabbit disc were harvested and cultured in vitro. Then they were randomly divided into eight groups with different concentrations of cefazolin and clindamycin(0 mg/ml,0. 25 mg/ml,0. 5 mg/ml, 1 mg/ml). Semi-quantitative real-time polymerase chain reaction ( RT-PCR) was used to quantify type Ⅱ collagen and aggrecan respectively. The changes of cells viability were detected by CCK - 8 staining. [ Result] Cefazolin and clindamycin can inhibit type Ⅱ collagen and aggrecan expression at the concentration of exceeding 0. 5 mg/ml and 0. 25 mg/ml and reached their peaks at 1. 0 mg/ml. Cefazolin and clindamycin affected the viability of the NP cells exposed at the concentration of exceeding 0. 5 mg/ ml and 0.25 mg/ml. The concentration below the above level didn't obviously affect cell activity. [ Conclusion ] Cefazolin and clindamycin can inhibit type Ⅱ collagen and aggrecan expression at the concentration of exceeding 0. 5 mg/ml and 0. 25 mg/ml. Cefazolin and clindamycin affect the viability of the NP cells exposed at the concentration of exceeding 0. 5 mg/ml and 0. 25 mg/ ml.%[目的]检测高浓度的头孢唑林钠及克林霉素对兔腰椎间盘髓核细胞活力及增殖能力的影响.[方法]通过在体外分离、培养新西兰兔髓核细胞,体外扩增培养至第1代,采用CCK-8及RT-PCR等方法,检测4个浓度(0 mg/ml、0.25 mg/ml、0.5 mg/ml、1 mg/ml)的头孢唑啉钠及克林霉素对于兔腰椎间盘髓核细胞活力及增殖能力的影响.[结果]当头孢唑啉钠浓度超过0.5mg/ml、克林霉素浓度超过0.25 mg/ml时,髓核细胞Ⅱ型胶原及蛋白多糖的表达下降,浓度在1.0 mg/ml时达到最低.头孢唑啉钠浓度超过0.5 mg/ml、克林霉素浓度超过0.25 mg/ml时,明显影响细胞活力,小于以上浓度时细胞活性无明显影响.[

  20. Shock initiation studies on high concentration hydrogen peroxide

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, Stephen A [Los Alamos National Laboratory; Dattelbaum, Dana M [Los Alamos National Laboratory; Stahl, David B [Los Alamos National Laboratory; Gibson, L. Lee [Los Alamos National Laboratory; Bartram, Brian D. [Los Alamos National Laboratory

    2009-01-01

    Concentrated hydrogen peroxide (H{sub 2}O{sub 2}) has been known to detonate for many years. However, because of its reactivity and the difficulty in handling and confining it, along with the large critical diameter, few studies providing basic information about the initiation and detonation properties have been published. We are conducting a study to understand and quantify the initiation and detonation properties of highly concentrated H{sub 2}O{sub 2} using a gas-driven two-stage gun to produce well defined shock inputs. Multiple magnetic gauges are used to make in-situ measurements of the growth of reaction and subsequent detonation in the liquid. These experiments are designed to be one-dimensional to eliminate any difficulties that might be encountered with large critical diameters. Because of the concern of the reactivity of the H{sub 2}O{sub 2} with the confining materials, a remote loading system has been developed. The gun is pressurized, then the cell is filled and the experiment shot within less than three minutes. TV cameras are attached to the target so the cell filling can be monitored. Several experiments have been completed on {approx}98 wt % H{sub 2}O{sub 2}/H{sub 2}O mixtures; initiation has been observed in some experiments that shows homogeneous shock initiation behavior. The initial shock pressurizes and heats the mixture. After an induction time, a thermal explosion type reaction produces an evolving reactive wave that strengthens and eventually overdrives the first wave producing a detonation. From these measurements, we have determined unreacted Hugoniot information, times (distances) to detonation (Pop-plot points) that indicate low sensitivity, and detonation velocities of high concentration H{sub 2}O{sub 2}/H{sub 2}O solutions that agree with earlier estimates.

  1. Shock initiation studies on high concentration hydrogen peroxide

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, Stephen A [Los Alamos National Laboratory; Dattelbaum, Dana M [Los Alamos National Laboratory; Stahl, David B [Los Alamos National Laboratory; Gibson, L. Lee [Los Alamos National Laboratory; Bartram, Brian D. [Los Alamos National Laboratory

    2009-01-01

    Concentrated hydrogen peroxide (H{sub 2}O{sub 2}) has been known to detonate for many years. However, because of its reactivity and the difficulty in handling and confining it, along with the large critical diameter, few studies providing basic information about the initiation and detonation properties have been published. We are conducting a study to understand and quantify the initiation and detonation properties of highly concentrated H{sub 2}O{sub 2} using a gas-driven two-stage gun to produce well defined shock inputs. Multiple magnetic gauges are used to make in-situ measurements of the growth of reaction and subsequent detonation in the liquid. These experiments are designed to be one-dimensional to eliminate any difficulties that might be encountered with large critical diameters. Because of the concern of the reactivity of the H{sub 2}O{sub 2} with the confining materials, a remote loading system has been developed. The gun is pressurized, then the cell is filled and the experiment shot within less than three minutes. TV cameras are attached to the target so the cell filling can be monitored. Several experiments have been completed on {approx}98 wt % H{sub 2}O{sub 2}/H{sub 2}O mixtures; initiation has been observed in some experiments that shows homogeneous shock initiation behavior. The initial shock pressurizes and heats the mixture. After an induction time, a thermal explosion type reaction produces an evolving reactive wave that strengthens and eventually overdrives the first wave producing a detonation. From these measurements, we have determined unreacted Hugoniot information, times (distances) to detonation (Pop-plot points) that indicate low sensitivity, and detonation velocities of high concentration H{sub 2}O{sub 2}/H{sub 2}O solutions that agree with earlier estimates.

  2. High-Efficiency Organic Solar Concentrators for Photovoltaics

    National Research Council Canada - National Science Library

    Michael J. Currie; Jonathan K. Mapel; Timothy D. Heidel; Shalom Goffri; Marc A. Baldo

    2008-01-01

    The cost of photovoltaic power can be reduced with organic solar concentrators. These are planar waveguides with a thin-film organic coating on the face and inorganic solar cells attached to the edges...

  3. Factors Impeding Enzymatic Wheat Gluten Hydrolysis at High Solid Concentrations

    NARCIS (Netherlands)

    Hardt, N.A.; Janssen, A.E.M.; Boom, R.M.; Goot, van der A.J.

    2014-01-01

    Enzymatic wheat gluten hydrolysis at high solid concentrations is advantageous from an environmental and economic point of view. However, increased wheat gluten concentrations result in a concentration effect with a decreased hydrolysis rate at constant enzyme-to-substrate ratios and a decreased

  4. Low-concentration uranium enters the HepG2 cell nucleus rapidly and induces cell stress response.

    Science.gov (United States)

    Guéguen, Yann; Suhard, David; Poisson, Clémentine; Manens, Line; Elie, Christelle; Landon, Géraldine; Bouvier-Capely, Céline; Rouas, Caroline; Benderitter, Marc; Tessier, Christine

    2015-12-25

    This study aimed to compare the cell stress effects of low and high uranium concentrations and relate them to its localization, precipitate formation, and exposure time. The time-course analysis shows that uranium appears in cell nuclei as a soluble form within 5 min of exposure, and quickly induces expression of antioxidant and DNA repair genes. On the other hand, precipitate formations began at the very beginning of exposure at the 300-μM concentration, but took longer to appear at lower concentrations. Adaptive response might occur at low concentrations but are overwhelmed at high concentrations, especially when uranium precipitates are abundant.

  5. Monitoring of yeast cell concentration using a micromachnined impedance sensor

    NARCIS (Netherlands)

    Krommenhoek, E.E.; Gardeniers, Johannes G.E.; Bomer, Johan G.; van den Berg, Albert; Li, X.; Li, X.; Ottens, M.; van der Wielen, L.A.M.; van Dedem, G.W.K.; van Leeuwen, M.; van Gulik, W.M.; Heijnen, J.J.

    2006-01-01

    This paper describes the design, modeling and experimental characterization of a micromachined impedance sensor for on-line monitoring of the viable yeast cell concentration (biomass) in a miniaturized cell assay. Measurements in Saccharomyces cerevisiae cell culture show that the characteristic fre

  6. Monitoring of yeast cell concentration using a micromachined impedance sensor

    NARCIS (Netherlands)

    Krommenhoek, E.E.; Gardeniers, Johannes G.E.; Bomer, Johan G.; van den Berg, Albert; Li, X.; Ottens, M.; van der Wielen, L.A.M.; van Dedem, G.W.K.; van Leeuwen, M.; van Gulik, W.M.; Heijnen, J.J.

    2005-01-01

    The paper describes the design, modelling and experimental characterization of a micromachined impedance sensor for on-line monitoring of the viable yeast cell concentration (biomass) in a miniaturized cell assay. Measurements in a Saccharomyces cerevisiae cell culture show that the permittivity of

  7. Refractive Secondary Solar Concentrator Demonstrated High-Temperature Operation

    Science.gov (United States)

    Wong, Wayne A.

    2002-01-01

    Space applications that utilize solar thermal energy--such as electric power conversion systems, thermal propulsion systems, and furnaces--require highly efficient solar concentration systems. The NASA Glenn Research Center is developing the refractive secondary concentrator, which uses refraction and total internal reflection to efficiently concentrate and direct solar energy. When used in combination with advanced lightweight primary concentrators, such as inflatable thin films, the refractive secondary concentrator enables very high system concentration ratios and very high temperatures. Last year, Glenn successfully demonstrated a secondary concentrator throughput efficiency of 87 percent, with a projected efficiency of 93 percent using an antireflective coating. Building on this achievement, Glenn recently successfully demonstrated high-temperature operation of the secondary concentrator when it was used to heat a rhenium receiver to 2330 F. The high-temperature demonstration of the concentrator was conducted in Glenn's 68-ft long Tank 6 thermal vacuum facility equipped with a solar simulator. The facility has a rigid panel primary concentrator that was used to concentrate the light from the solar simulator onto the refractive secondary concentrator. NASA Marshall Space Flight Center provided a rhenium cavity, part of a solar thermal propulsion engine, to serve as the high-temperature receiver. The prototype refractive secondary concentrator, measuring 3.5 in. in diameter and 11.2 in. long, is made of single-crystal sapphire. A water-cooled splash shield absorbs spillage light outside of the 3.5-in. concentrator aperture. Multilayer foil insulation composed of tungsten, molybdenum, and niobium is used to minimize heat loss from the hightemperature receiver. A liquid-cooled canister calorimeter is used to measure the heat loss through the multilayer foil insulation.

  8. Fabrication and tolerances of optics for high concentration photovoltaics

    OpenAIRE

    Benitez Gimenez, Pablo; Miñano Dominguez, Juan Carlos; Ahmadpanaih, Hamed; Mendes Lopes, Joao; Zamora Herranz, Pablo

    2014-01-01

    High Concentration Photovoltaics (HCPV) require an optical system with high efficiency, low cost and large tolerance. We describe the particularities of the HCPV applications, which constrain the optics design and the manufacturing techonologies.

  9. Accelerated Life Test for Photovoltaic Cells Using Concentrated Light

    OpenAIRE

    Daniel Tudor Cotfas; Petru Adrian Cotfas; Dan Ion Floroian; Laura Floroian

    2016-01-01

    This paper presents a new method developed to significantly reduce the necessary time for the ageing tests for different types of photovoltaic cells. Two ageing factors have been applied to the photovoltaic cells: the concentrated light and the temperature. The maximum power of the photovoltaic cells was monitored during the ageing process. The electrical dc and ac parameters of the photovoltaic cells were measured and analyzed at 1 sun irradiance, before and after the test stress. During the...

  10. Fundamental limits to collective concentration sensing in cell populations

    CERN Document Server

    Fancher, Sean

    2016-01-01

    The precision of concentration sensing is improved when cells communicate. Here we derive the physical limits to concentration sensing for cells that communicate over short distances by directly exchanging small molecules (juxtacrine signaling), or over longer distances by secreting and sensing a diffusive messenger molecule (autocrine signaling). In the latter case, we find that the optimal cell spacing can be large, due to a tradeoff between maintaining communication strength and reducing signal cross-correlations. This leads to the surprising result that autocrine signaling allows more precise sensing than juxtacrine signaling for sufficiently large populations. We compare our results to data from a wide variety of communicating cell types.

  11. Point-focus spectral splitting solar concentrator for multiple cells concentrating photovoltaic system

    CERN Document Server

    Maragliano, Carlo; Stefancich, Marco

    2015-01-01

    In this paper we present and experimentally validate a low-cost design of a spectral splitting concentrator for the efficient conversion of solar energy. The optical device consists of a dispersive prismatic lens made of polycarbonate designed to simultaneously concentrate the solar light and split it into its spectral components. With respect to our previous implementation, this device concentrates the light along two axes and generates a light pattern compatible with the dimensions of a set of concentrating photovoltaic cells while providing a higher concentration ratio. The mathematical framework and the constructive approach used for the design are presented and the device performance is simulated using ray-tracing software. We obtain spectral separation in the visible range within a 3x1 cm2 area and a maximum concentration of 210x for a single wavelength. The device is fabricated by injection molding and its performance is experimentally investigated. We measure an optical transmissivity above 90% in the...

  12. High Voltage Solar Concentrator Experiment with Implications for Future Space Missions - S6a-35

    Science.gov (United States)

    George, I. S. Mehdi P. J.; O'Neill, M.; Matson, R.; Borckschmidt, A.

    2004-12-01

    This paper describes the design, development, fabrication, and test of a high performance, high voltage solar concentrator array. This assembly is believed to be the first ever terrestrial triple-junction-cell solar array rated at over 1 kW. The concentrator provides over 200 W/square meter power output at a nominal 600 Vdc while operating under terrestrial sunlight. Space-quality materials and fabrication techniques were used for the array, and the 3005-meter elevation installation below the Tropic of Cancer allowed testing as close as possible to space deployment without an actual launch. The array includes two concentrator modules, each with a 3 square meter aperture area. Each concentrator module uses a linear Fresnel lens to focus sunlight onto a photovoltaic receiver that uses 240 series-connected triple-junction solar cells. Operation of the two receivers in series can provide 1200 Vdc which would be adequate for the "direct drive" of some ion engines or microwave transmitters in space. Lens aperture width is 84 cm and the cell active width is 3.2 cm, corresponding to a geometric concentration ratio of 26X. The evaluation includes the concentrator modules, the solar cells, and the materials and techniques used to attach the solar cells to the receiver heat sink. For terrestrial applications, a finned aluminum extrusion was used for the heat sink for the solar cells, maintaining a low cell temperature so that solar cell efficiency remains high.

  13. Common Student Misconceptions in Electrochemistry: Galvanic, Electrolytic, and Concentration Cells.

    Science.gov (United States)

    Sanger, Michael J.; Greenbowe, Thomas J.

    1997-01-01

    Investigates student (N=16) misconceptions concerning electrochemistry related to galvanic, electrolytic, and concentration cells. Findings indicate that most students demonstrating misconceptions were still able to calculate cell potentials correctly. Discusses common misconceptions and possible sources of these. Contains 33 references.…

  14. Common Student Misconceptions in Electrochemistry: Galvanic, Electrolytic, and Concentration Cells.

    Science.gov (United States)

    Sanger, Michael J.; Greenbowe, Thomas J.

    1997-01-01

    Investigates student (N=16) misconceptions concerning electrochemistry related to galvanic, electrolytic, and concentration cells. Findings indicate that most students demonstrating misconceptions were still able to calculate cell potentials correctly. Discusses common misconceptions and possible sources of these. Contains 33 references.…

  15. Effect of Temperature on the AlGaAs/GaAs Tandem Solar Cell for Concentrator Photovoltaic Performances

    OpenAIRE

    Hemmani Abderrahmane; B. Dennai; H. Khachab; A. Helmaoui

    2016-01-01

    Multijunction solar cells for concentrator photovoltaic (CPV) systems have attracted increasing attention in recent years for their very high conversion efficiencies. But there is a problem in this type of solar cells (CPV) is to increase the temperature if it has been augmenting the concentration ratio. In this paper, we studied the effect of the concentration photovoltaic in a high-efficiency double-junction devices solar cell on temperature solar cell and its impact on the photocurrent, th...

  16. Intercomparison of passive microwave sea ice concentration retrievals over the high-concentration Arctic sea ice

    DEFF Research Database (Denmark)

    andersen, susanne; Tonboe, R.; Kaleschke, L.

    2007-01-01

    [1] Measurements of sea ice concentration from the Special Sensor Microwave Imager (SSM/I) using seven different algorithms are compared to ship observations, sea ice divergence estimates from the Radarsat Geophysical Processor System, and ice and water surface type classification of 59 wide......-swath synthetic aperture radar (SAR) scenes. The analysis is confined to the high-concentration Arctic sea ice, where the ice cover is near 100%. During winter the results indicate that the variability of the SSM/I concentration estimates is larger than the true variability of ice concentration. Results from...... a trusted subset of the SAR scenes across the central Arctic allow the separation of the ice concentration uncertainty due to emissivity variations and sensor noise from other error sources during the winter of 2003-2004. Depending on the algorithm, error standard deviations from 2.5 to 5.0% are found...

  17. High Stokes shift perylene dyes for luminescent solar concentrators.

    Science.gov (United States)

    Sanguineti, Alessandro; Sassi, Mauro; Turrisi, Riccardo; Ruffo, Riccardo; Vaccaro, Gianfranco; Meinardi, Francesco; Beverina, Luca

    2013-02-25

    Highly efficient plastic based single layer Luminescent Solar Concentrators (LSCs) require the design of luminophores having complete spectral separation between absorption and emission spectra (large Stokes shift). We describe the design, synthesis and characterization of a new perylene dye possessing Stokes shift as high as 300 meV, fluorescent quantum yield in the LSC slab of 70% and high chemical and photochemical stability.

  18. Hair and toenail arsenic concentrations of residents living in areas with high environmental arsenic concentrations.

    OpenAIRE

    Hinwood, Andrea L; Sim, Malcolm R; Jolley, Damien; de Klerk, Nick; Bastone, Elisa B; Gerostamoulos, Jim; Drummer, Olaf H

    2003-01-01

    Surface soil and groundwater in Australia have been found to contain high concentrations of arsenic. The relative importance of long-term human exposure to these sources has not been established. Several studies have investigated long-term exposure to environmental arsenic concentrations using hair and toenails as the measure of exposure. Few have compared the difference in these measures of environmental sources of exposure. In this study we aimed to investigate risk factors for elevated hai...

  19. Compact Flyeye concentrator with improved irradiance uniformity on solar cell

    Science.gov (United States)

    Zhuang, Zhenfeng; Yu, Feihong

    2013-08-01

    A Flyeye concentrator with improved irradiance distribution on the solar cell in a concentrator photovoltaic system is proposed. This Flyeye concentrator is composed of four surfaces: a refractive surface, mirror surface, freeform surface, and transmissive surface. Based on the principles of geometrical optics, the contours of the proposed Flyeye concentrator are calculated according to Fermat's principle, the edge-ray principle, and the ray reversibility principle without solving partial differential equations or using an optimization algorithm, therefore a slope angle control method is used to construct the freeform surface. The solid model is established by applying a symmetry of revolution around the optical axis. Additionally, the optical performance for the Flyeye concentrator is simulated and analyzed by Monte-Carlo method. Results show that the Flyeye concentrator optical efficiency of >96.2% is achievable with 1333× concentration ratio and ±1.3 deg acceptance angle, and 1.3 low aspect ratio (average thickness to entry aperture diameter ratio). Moreover, comparing the Flyeye concentrator specification to that of the Köhler concentrator and the traditional Fresnel-type concentrator, results indicate that this concentrator has the advantages of improved uniformity, reduced thickness, and increased tolerance to the incident sunlight.

  20. Applications of nonimaging optics for very high solar concentrations

    Energy Technology Data Exchange (ETDEWEB)

    O`Gallagher, J.; Winston, R.

    1997-12-31

    Using the principles and techniques of nonimaging optics, solar concentrations that approach the theoretical maximum can be achieved. This has applications in solar energy collection wherever concentration is desired. In this paper, we survey recent progress in attaining and using high and ultrahigh solar fluxes. We review a number of potential applications for highly concentrated solar energy and the current status of the associated technology. By making possible new and unique applications for intense solar flux, these techniques have opened a whole new frontier for research and development of potentially economic uses of solar energy.

  1. Vitamin C at high concentrations induces cytotoxicity in malignant melanoma but promotes tumor growth at low concentrations.

    Science.gov (United States)

    Yang, Guang; Yan, Yao; Ma, Younan; Yang, Yixin

    2017-08-01

    Vitamin C has been used in complementary and alternative medicine for cancers regardless of its ineffectiveness in clinical trials and the paradoxical effects antioxidants have on cancer. Vitamin C was found to induce cytotoxicity against cancers. However, the mechanisms of action have not been fully elucidated, and the effects of vitamin C on human malignant melanoma have not been examined. This study revealed that vitamin C at millimolar concentrations significantly reduced the cell viability as well as invasiveness, and induced apoptosis in human malignant melanoma cells. Vitamin C displayed stronger cytotoxicity against the Vemurafenib-resistance cell line A2058 compared with SK-MEL-28. In contrast, vitamin C at micromolar concentrations promoted cell growth, migration and cell cycle progression, and protected against mitochondrial stress. Vemurafenib paradoxically activated the RAS-RAF-MEK-ERK signaling pathway in the Vemurafenib-resistant A2058, however, vitamin C abolished the activations. Vitamin C displayed synergistic cytotoxicity with Vemurafenib against the Vemurafenib-resistant A2058. In vivo assay suggested that lower dosage (equivalent to 0.5 g/70 kg) of vitamin C administered orally increased the melanoma growth. Therefore, vitamin C may exert pro- or anti-melanoma effect depending on concentration. The combination of vitamin C at high dosage and Vemurafenib is promising in overcoming the action of drug resistance. © 2017 Wiley Periodicals, Inc.

  2. Pathway to 50% Efficient Inverted Metamorphic Concentrator Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Geisz, John F [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Steiner, Myles A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Jain, Nikhil [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Schulte, Kevin L [National Renewable Energy Laboratory (NREL), Golden, CO (United States); France, Ryan M [National Renewable Energy Laboratory (NREL), Golden, CO (United States); McMahon, William E [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Perl, Emmett [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Horowitz, Kelsey A [National Renewable Energy Laboratory (NREL), Golden, CO (United States); Friedman, Daniel J [National Renewable Energy Laboratory (NREL), Golden, CO (United States)

    2017-09-06

    Series-connected five (5J) and six junction (6J) concentrator solar cell strategies have the realistic potential to exceed 50% efficiency to enable low-cost CPV systems. We propose three strategies for developing a practical 6J device. We have overcome many of the challenges required to build such concentrator solar cell devices: We have developed 2.1 eV AlGaInP, 1.7 eV AlGaAs, and 1.7 eV GaInAsP junctions with external radiative efficiency greater than 0.1%. We have developed a transparent tunnel junction that absorbs minimal light intended for the second junction yet resists degradation under thermal load. We have developed metamorphic grades from the GaAs to the InP lattice constant that are transparent to sub-GaAs bandgap light. We have grown and compared low bandgap junctions (0.7eV - 1.2 eV) using metamorphic GaInAs, metamorphic GaInAsP, and GaInAsP lattice-matched to InP. And finally, we have demonstrated excellent performance in a high voltage, low current 4 junction inverted metamorphic device using 2.1, 1.7, 1.4, and 1.1 eV junctions with over 8.7 mA/cm2 one-sun current density that operates up to 1000 suns without tunnel junction failure.

  3. Electron beam treatment of exhaust gas with high NOx concentration

    Science.gov (United States)

    Licki, Janusz; Chmielewski, Andrzej G.; Pawelec, Andrzej; Zimek, Zbigniew; Witman, Sylwia

    2014-05-01

    Simulated exhaust gases with a high NOx concentration, ranging from 200 to 1700 ppmv, were irradiated by an electron beam from an accelerator. In the first part of this study, only exhaust gases were treated. Low NOx removal efficiencies were obtained for high NOx concentrations, even with high irradiation doses applied. In the second part of study, gaseous ammonia or/and vapor ethanol were added to the exhaust gas before its inlet to the plasma reactor. These additions significantly enhanced the NOx removal efficiency. The synergistic effect of high SO2 concentration on NOx removal was observed. The combination of electron beam treatment with the introduction of the above additions and with the performance of irradiation under optimal parameters ensured high NOx removal efficiency without the application of a solid-state catalyst.

  4. [Reasons of high concentration ammonium in Yellow River, China].

    Science.gov (United States)

    Zhang, Xue-qing; Xia, Xing-hui; Yang, Zhi-feng

    2007-07-01

    Ammonium nitrogen contamination is one of the major problems of the Yellow River in China. The speciation, concentration and sources of nitrogen compounds as well as the water environment conditions of the Yellow River had been analyzed to study the reasons for the fact that the ammonium nitrogen concentration was above the water quality standard. In addition, laboratory experiments had been carried out to investigate the effects of suspended sediment (SS) on nitrification rate. The results indicated that the presence of SS could accelerate the nitrification process, therefore, the effects of SS on nitrification rate was not the reason for the high level of ammonium nitrogen in the river. The excessive and continuous input of nitrogen contaminants to the river was the fundamental reason for the high concentration of ammonium nitrogen. Organic and ammonium nitrogen with high concentration inhibitted the nitrification processes. When the initial NH4+ -N concentrations were 10.1, 18.4 and 28.2 mg/L, nitrification efficiencies were 17.4%, 13.0% and 2.5%, respectively. When the initial organic nitrogen concentrations were 5.5 and 8.6 mg/L, the maximum concentrations of ammonium nitrogen produced by the oxidation of organic nitrogen would reach 0.47 and 1.69 mg/L and they would last for 2 days and 6 days, respectively. The oxygen-consuming organics and toxic substance existing in the river water could inhibit the activity of nitrifying bacteria, and thus lead to the accumulation of ammonium nitrogen. In addition, the high pH value of river water resulted in the high concentration of nonionic ammonium nitrogen which would reduce the activity of nitrifying bacteria and decrease the nitrification rates. Besides, low river runoff, low SS content and low activity of nitrifying bacteria resulted in the high level of ammonium nitrogen of the river in the low water season.

  5. Differences in Swallowing between High and Low Concentration Taste Stimuli

    Directory of Open Access Journals (Sweden)

    Ahmed Nagy

    2014-01-01

    Full Text Available Taste is a property that is thought to potentially modulate swallowing behavior. Whether such effects depend on taste, intensity remains unclear. This study explored differences in the amplitudes of tongue-palate pressures in swallowing as a function of taste stimulus concentration. Tongue-palate pressures were collected in 80 healthy women, in two age groups (under 40, over 60, stratified by genetic taste status (nontasters, supertasters. Liquids with different taste qualities (sweet, sour, salty, and bitter were presented in high and low concentrations. General labeled magnitude scale ratings captured perceived taste intensity and liking/disliking of the test liquids. Path analysis explored whether factors of taste, concentration, age group, and/or genetic taste status impacted: (1 perceived intensity; (2 palatability; and (3 swallowing pressures. Higher ratings of perceived intensity were found in supertasters and with higher concentrations, which were more liked/disliked than lower concentrations. Sweet stimuli were more palatable than sour, salty, or bitter stimuli. Higher concentrations elicited stronger tongue-palate pressures independently and in association with intensity ratings. The perceived intensity of a taste stimulus varies as a function of stimulus concentration, taste quality, participant age, and genetic taste status and influences swallowing pressure amplitudes. High-concentration salty and sour stimuli elicit the greatest tongue-palate pressures.

  6. High Black Carbon (BC) Concentrations along Indian National Highways

    Science.gov (United States)

    Kumar, S.; Singh, A. K.; Singh, R. P.

    2015-12-01

    Abstract:Black carbon (BC), the optically absorbing component of carbonaceous aerosol, has direct influence on radiation budget and global warming. Vehicular pollution is one of the main sources for poor air quality and also atmospheric pollution. The number of diesel vehicles has increased on the Indian National Highways during day and night; these vehicles are used for the transport of goods from one city to another city and also used for public transport. A smoke plume from the vehicles is a common feature on the highways. We have made measurements of BC mass concentrations along the Indian National Highways using a potable Aethalometer installed in a moving car. We have carried out measurements along Varanasi to Kanpur (NH-2), Varanasi to Durgapur (NH-2), Varanasi to Singrauli (SH-5A) and Varanasi to Ghazipur (NH-29). We have found high concentration of BC along highways, the average BC mass concentrations vary in the range 20 - 40 µg/m3 and found high BC mass concentrations up to 600 μg/m3. Along the highways high BC concentrations were characteristics of the presence of industrial area, power plants, brick kilns and slow or standing vehicles. The effect of increasing BC concentrations along the National Highways and its impact on the vegetation and human health will be presented. Key Words: Black Carbon; Aethalometer; mass concentration; Indian National Highways.

  7. The prognostic value of YKL-40 concentrations in nonmyeloablative conditioning allogeneic hematopoietic cell transplantation

    DEFF Research Database (Denmark)

    Mørup, Anne Mette; Kornblit, Brian; Johansen, Julia S;

    2011-01-01

    and plasma YKL-40 concentrations as prognostic biomarkers in a cohort of 149 patients treated with hematopoietic cell transplantation (HCT) after nonmyeloablative conditioning for hematologic malignancies. Recipients with pretransplant YKL-40 concentrations above the age-adjusted 95th percentile (high) had...

  8. Periodically multilayered planar optical concentrator for photovoltaic solar cells

    Science.gov (United States)

    Solano, Manuel E.; Faryad, Muhammad; Monk, Peter B.; Mallouk, Thomas E.; Lakhtakia, Akhlesh

    2013-11-01

    A planar optical concentrator comprising a periodic multilayered isotropic dielectric material backed by a metallic surface-relief grating was theoretically examined for silicon photovoltaics. The concentrator was optimized using a differential evolution algorithm for solar-spectrum-integrated power-flux density. Further optimization was carried out for tolerance to variations in the incidence angle, spatial dimensions, and dielectric properties. The average electron-hole pair density in a silicon solar cell can be doubled, and the material costs substantially diminished by this concentrator, whose efficacy is due to the excitation of waveguide modes and multiple surface-plasmon-polariton waves in a broad spectral regime.

  9. Periodically multilayered planar optical concentrator for photovoltaic solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Solano, Manuel E.; Monk, Peter B. [Department of Mathematical Sciences, University of Delaware, Newark, Delaware 19716 (United States); Faryad, Muhammad; Lakhtakia, Akhlesh, E-mail: akhlesh@psu.edu [Department of Engineering Science and Mechanics, Pennsylvania State University, University Park, Pennsylvania 16802 (United States); Mallouk, Thomas E. [Department of Chemistry, Pennsylvania State University, University Park, Pennsylvania 16802 (United States)

    2013-11-04

    A planar optical concentrator comprising a periodic multilayered isotropic dielectric material backed by a metallic surface-relief grating was theoretically examined for silicon photovoltaics. The concentrator was optimized using a differential evolution algorithm for solar-spectrum-integrated power-flux density. Further optimization was carried out for tolerance to variations in the incidence angle, spatial dimensions, and dielectric properties. The average electron-hole pair density in a silicon solar cell can be doubled, and the material costs substantially diminished by this concentrator, whose efficacy is due to the excitation of waveguide modes and multiple surface-plasmon-polariton waves in a broad spectral regime.

  10. Endothelial cell apoptosis correlates with low haptoglobin concentrations in diabetes.

    Science.gov (United States)

    Dalan, Rinkoo; Liu, Xiaofeng; Goh, Liuh Ling; Bing, Sun; Luo, Kathy Qian

    2017-08-01

    The haptoglobin 2-2 genotype is associated with lower haptoglobin concentrations and atherosclerosis in diabetes. Endothelial cell apoptosis contributes significantly to atherosclerosis. We studied endothelial cell apoptosis in diabetes patients with haptoglobin 2-2 and non-haptoglobin 2-2 genotype. Approach and results: We pooled plasma from 10 patients with haptoglobin 2-2 and non-haptoglobin 2-2 genotype and quantified endothelial cell apoptosis using a hemodynamic lab-on-chip system. Then, we conducted similar experiments on individual diabetes plasma samples with the haptoglobin 2-2 ( n = 20) and non-haptoglobin 2-2 genotype ( n = 20). Haptoglobin beta concentrations were measured by Western blot analysis. We looked for association with demographic, metabolic variables, inflammation and oxidative stress. In pooled plasma, endothelial cell apoptosis was higher in haptoglobin 2-2 group (haptoglobin 2-2: 23.18% vs non-haptoglobin 2-2:15.32%). In individual samples, univariate analysis showed that endothelial cell apoptosis correlated with haptoglobin beta concentration [ β = -10.29 (95% confidence interval: -13.44, -7.14), p  0.05). These results show that regardless of the haptoglobin genotype, haptoglobin is associated with prevention of endothelial cell apoptosis in diabetes.

  11. High-performance flat-panel solar thermoelectric generators with high thermal concentration.

    Science.gov (United States)

    Kraemer, Daniel; Poudel, Bed; Feng, Hsien-Ping; Caylor, J Christopher; Yu, Bo; Yan, Xiao; Ma, Yi; Wang, Xiaowei; Wang, Dezhi; Muto, Andrew; McEnaney, Kenneth; Chiesa, Matteo; Ren, Zhifeng; Chen, Gang

    2011-05-01

    The conversion of sunlight into electricity has been dominated by photovoltaic and solar thermal power generation. Photovoltaic cells are deployed widely, mostly as flat panels, whereas solar thermal electricity generation relying on optical concentrators and mechanical heat engines is only seen in large-scale power plants. Here we demonstrate a promising flat-panel solar thermal to electric power conversion technology based on the Seebeck effect and high thermal concentration, thus enabling wider applications. The developed solar thermoelectric generators (STEGs) achieved a peak efficiency of 4.6% under AM1.5G (1 kW m(-2)) conditions. The efficiency is 7-8 times higher than the previously reported best value for a flat-panel STEG, and is enabled by the use of high-performance nanostructured thermoelectric materials and spectrally-selective solar absorbers in an innovative design that exploits high thermal concentration in an evacuated environment. Our work opens up a promising new approach which has the potential to achieve cost-effective conversion of solar energy into electricity.

  12. Bottom-Up Cost Analysis of a High Concentration PV Module

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, Kelsey A. W.; Woodhouse, Michael; Lee, Hohyun; Smestad, Greg P.

    2016-03-31

    We present a bottom-up model of III-V multi-junction cells, as well as a high concentration PV (HCPV) module. We calculate $0.59/W(DC) manufacturing costs for our model HCPV module design with today's capabilities, and find that reducing cell costs and increasing module efficiency offer the most promising paths for future cost reductions. Cell costs could be significantly reduced via substrate reuse and improved manufacturing yields.

  13. Sterile Filtration of Highly Concentrated Protein Formulations: Impact of Protein Concentration, Formulation Composition, and Filter Material.

    Science.gov (United States)

    Allmendinger, Andrea; Mueller, Robert; Huwyler, Joerg; Mahler, Hanns-Christian; Fischer, Stefan

    2015-10-01

    Differences in filtration behavior of concentrated protein formulations were observed during aseptic drug product manufacturing of biologics dependent on formulation composition. The present study investigates filtration forces of monoclonal antibody formulations in a small-scale set-up using polyvinylidene difluoride (PVDF) or polyethersulfone (PES) filters. Different factors like formulation composition and protein concentration related to differences in viscosity, as well as different filtration rates were evaluated. The present study showed that filtration behavior was influenced by the presence or absence of a surfactant in the formulation, which defines the interaction between filter membrane and surface active formulation components. This can lead to a change in filter resistance (PES filter) independent on the buffer system used. Filtration behavior was additionally defined by rheological non-Newtonian flow behavior. The data showed that high shear rates resulting from small pore sizes and filtration pressure up to 1.0 bar led to shear-thinning behavior for highly concentrated protein formulations. Differences in non-Newtonian behavior were attributed to ionic strength related to differences in repulsive and attractive interactions. The present study showed that the interplay of formulation composition, filter material, and filtration rate can explain differences in filtration behavior/filtration flux observed for highly concentrated protein formulations thus guiding filter selection.

  14. The anti-proliferative effect of metformin in triple-negative MDA-MB-231 breast cancer cells is highly dependent on glucose concentration: implications for cancer therapy and prevention.

    Science.gov (United States)

    Zordoky, Beshay N M; Bark, Diana; Soltys, Carrie L; Sung, Miranda M; Dyck, Jason R B

    2014-06-01

    Metformin has been shown to have a strong anti-proliferative effect in many breast cancer cell lines, mainly due to the activation of the energy sensing kinase, AMP-activated protein kinase (AMPK). MDA-MB-231 cells are aggressive and invasive breast cancer cells that are known to be resistant to several anti-cancer agents as well as to the anti-proliferative effect of metformin. As metformin is a glucose lowering drug, we hypothesized that normoglycemia will sensitize MDA-MB-231 cells to the anti-proliferative effect of metformin. MDA-MB-231 cells were treated with increasing metformin concentrations in hyperglycemic or normoglycemic conditions. The growth inhibitory effect of metformin was assessed by MTT assay. The expression of several proteins involved in cell proliferation was measured by Western blotting. In agreement with previous studies, treatment with metformin did not inhibit the growth of MDA-MB-231 cells cultured in hyperglycemic conditions. However, metformin significantly inhibited MDA-MB-231 growth when the cells were cultured in normoglycemic conditions. In addition, we show that metformin-treatment of MDA-MB-231 cells cultured in normoglycemic conditions and not in hyperglycemic conditions caused a striking activation of AMPK, and an AMPK-dependent inhibition of multiple molecular signaling pathways known to control protein synthesis and cell proliferation. Our data show that normoglycemia sensitizes the triple negative MDA-MB-231 breast cancer cells to the anti-proliferative effect of metformin through an AMPK-dependent mechanism. These findings suggest that tight normoglycemic control may enhance the anti-proliferative effect of metformin in diabetic cancer patients. Copyright © 2014 Elsevier B.V. All rights reserved.

  15. Denitrification of fertilizer wastewater at high chloride concentration

    DEFF Research Database (Denmark)

    Ucisik, Ahmed Süheyl; Henze, Mogens

    g/l. The results of the experiments showed that biological denitrification was feasible at the extreme environmental conditions prevailing in fertilizer wastewater. Stable continuous biological denitrfication of the synthetic high chloride wastewater was performed up to 77.4 g Cl/l at 37 degree C......Wastewater from fertilizer industry is characterized by high contents of chloride concentration, which normally vary between 60 and 76 g/l. Experiments with bilogical denitrification were performed in lab-scale "fill and draw" reactors with synthetic wastewater with chloride concentrations up to 77.4...

  16. Concentration measurement of yeast suspensions using high frequency ultrasound backscattering.

    Science.gov (United States)

    Elvira, Luis; Vera, Pedro; Cañadas, Francisco Jesús; Shukla, Shiva Kant; Montero, Francisco

    2016-01-01

    This work proposes the use of an ultrasound based technique to measure the concentration of yeasts in liquid suspension. This measurement was achieved by the detection and quantification of ultrasonic echoes backscattered by the cells. More specifically, the technique was applied to the detection and quantification of Saccharomyces cerevisiae. A theoretical approach was proposed to get the average density and sound speed of the yeasts, which were found to be 1116 kg/m(3) and 1679 m/s, respectively. These parameters were needed to model the waves backscattered by each single cell. A pulse-echo arrangement working around 50 MHz, being able to detect echoes from single yeasts was used to characterize experimentally yeast solutions from 10(2) to 10(7)cells/ml. The Non-negative Matrix Factorization denoising technique was applied for data analysis. This technique required a previous learning of the spectral patterns of the echoes reflected from yeasts in solution and the base noise from the liquid medium. Comparison between pulse correlation (without denoising) and theoretical and experimental pattern learning was made to select the best signal processing. A linear relation between ultrasound output and concentration was obtained with correlation coefficient R(2)=0.996 for the experimental learning. Concentrations from 10(4) to 10(7)cells/ml were detected above the base noise. These results show the viability of using the ultrasound backscattering technique to detect yeasts and measure their concentration in liquid cultures, improving the sensitivity obtained using spectrophotometric methods by one order of magnitude.

  17. High estrogen concentrations in receiving river discharge from a concentrated livestock feedlot.

    Science.gov (United States)

    Chen, Te-San; Chen, Ting-Chien; Yeh, Kuei-Jyum C; Chao, How-Ran; Liaw, Ean-Tun; Hsieh, Chi-Ying; Chen, Kuan-Chung; Hsieh, Lien-Te; Yeh, Yi-Lung

    2010-07-15

    Environmental estrogenic chemicals interrupt endocrine systems and generate reproductive abnormalities in wildlife, especially natural and synthetic estrogenic steroid hormones such as 17beta-estradiol (E2), estrone (E1), estriol (E3), 17alpha-ethynylestradiol (EE2), and diethylstilbestrol (DES). Concentrated animal feedlot operations (CAFOs) are of particular concern since large amounts of naturally excreted estrogens are discharged into aquatic environments. This study investigated E2, E1, E3, EE2, and DES with high performance liquid chromatography/tandem mass (HPLC-MS/MS) analyses along Wulo Creek in southern Taiwan, near a concentrated livestock feedlot containing 1,030,000 broiler chickens, 934,000 laying hens, 85,000 pigs, and 1500 cattle. Sampling was performed from December 2008 to May 2009, in which 54 samples were collected. Experimental results indicate that concentrations of EE2 were lower than the limit of detection (LOD), and concentrations of DES were only detected twice. Concentrations ranged from 7.4 to 1267 ng/L for E1, from not detected (ND) to 313.6 ng/L for E2, and from ND to 210 ng/L for E3. E1 had the highest average mass fraction (72.2 + or - 3.6%), which was significantly higher than E3 (16.2 + or - 1.7%) and E2 (11.5 + or - 2.6%). Additionally, the mean E2 equivalent quotient (EEQ) ranged from 17.3 to 137.9 ng-E2/L. Despite having a markedly lower concentration than E1, E2 more significantly contributed (52.4 + or - 6.0%) EEQ than E1 (19.7 + or - 3.5%). Moreover, the concentrations of E2, E1, and E3 upstream were significantly higher than concentrations downstream, suggesting a high attenuation effect and fast degradation in the study water. Most concentrations in winter season were higher than those of spring season due to the low dilution effect and low microbial activity in the winter season. Based on the results of this study, we recommend further treatment of the wastewater discharge from the feedlot.

  18. Biodegradation dynamics of high catechol concentrations by Aspergillus awamori.

    Science.gov (United States)

    Stanchev, Veselin; Stoilova, Ivanka; Krastanov, Albert

    2008-06-15

    The biodegradation process of high catechol concentrations by Aspergillus awamori was investigated. The values of the kinetic constants for a model of specific growth rate at different initial conditions were determined. At 1.0 g/L catechol concentration, the biodegradation process proceeded in the conditions of substrate limitation. At higher catechol concentrations (2.0 and 3.0 g/L) a presence of substrate inhibition was established. The dynamics of the specific catechol degradation rate was studied and the values of catechol and biomass concentrations, maximizing the specific catechol degradation rate, were estimated analytically. The specified ratio catechol/biomass could serve as a starting base for determination of the initial conditions for a batch process, for specifying the moment of feeding for a fed-batch process, and for monitoring and control of a continuous process by the aim of time-optimal control.

  19. Reduction of Temperature in Concentrator Photovoltaic Module Using Coating with High Thermal Emissivity and Conductivity

    Directory of Open Access Journals (Sweden)

    Nakamura Satoshi

    2016-01-01

    Full Text Available The temperature of solar cells considerably increases under light-concentrating operations, and the conversion efficiency of solar cells decreases with increasing temperature. It is very important to reduce the cell temperature in concentrator photovoltaic modules. The thermal radiation layers with high thermal emissivity and thermal conductivity was coated on the aluminum samples which is used for the chassis of concentrator photovoltaic and the effect was evaluated under the conditions with wind. The temperature of sample with coating showed lower temperature than that without coating. In the condition with wind, the coated sample with high thermal emissivity and high thermal conductivity showed the lowest temperature due to the effect of thermal radiation and thermal conduction.

  20. High shear treatment of concentrates and drying conditions influence the solubility of milk protein concentrate powders.

    Science.gov (United States)

    Augustin, Mary Ann; Sanguansri, Peerasak; Williams, Roderick; Andrews, Helen

    2012-11-01

    The solubility of milk protein concentrate (MPC) powders was influenced by the method used for preparing the concentrate, drying conditions, and the type of dryer used. Increasing total solids of the ultrafiltered concentrates (23% total solids, TS) by diafiltration to 25% TS or evaporation to 31% TS decreased the solubility of MPC powders (80-83% protein, w/w dry basis), with ultrafiltration followed by evaporation to higher total solids having the greater detrimental effect on solubility. High shear treatment (homogenisation at 350/100 bar, microfluidisation at 800 bar or ultrasonication at 24 kHz, 600 watts) of ultrafiltered and diafiltered milk protein concentrates prior to spray drying increased the nitrogen solubility of MPC powders (82% protein, w/w dry basis). Of the treatments applied, microfluidisation was the most effective for increasing nitrogen solubility of MPC powders after manufacture and during storage. Manufacture of MPC powders (91% protein, w/w dry basis) prepared on two different pilot-scale dryers (single stage or two stage) from milk protein concentrates (20% TS) resulted in powders with different nitrogen solubility and an altered response to the effects of microfluidisation. Microfluidisation (400, 800 and 1200 bar) of the concentrate prior to drying resulted in increased long term solubility of MPC powders that were prepared on a single stage dryer but not those produced on a two stage spray dryer. This work demonstrates that microfluidisation can be used as a physical intervention for improving MPC powder solubility. Interactions between the method of preparation and treatment of concentrate prior to drying, the drying conditions and dryer type all influence MPC solubility characteristics.

  1. Dual Effects Exerted in Vitro by Micromolar Concentrations of Deoxynivalenol on Undifferentiated Caco-2 Cells

    Directory of Open Access Journals (Sweden)

    Gina Manda

    2015-02-01

    Full Text Available Contamination of crops used for food and feed production with Fusarium mycotoxins, such as deoxynivalenol (DON, raise important health and economic issues all along the food chain. Acute exposure to high DON concentrations can alter the intestinal barrier, while chronic exposure to lower doses may exert more subtle effects on signal transduction pathways, leading to disturbances in cellular homeostasis. Using real-time cellular impedance measurements, we studied the effects exerted in vitro by low concentrations of DON (0.37–1.50 μM, relevant for mycotoxin-contaminated food, on the proliferation of undifferentiated Caco-2 cells presenting a tumorigenic phenotype. A 1.5 μM concentration of DON maintained cell adherence of non-proliferating Caco-2 cells, whilst arresting the growth of actively proliferating cells compared with control Caco-2 cells in vitro. At 0.37 μM, DON enhanced Caco-2 cell metabolism, thereby triggering a moderate increase in cell proliferation. The results of the current study suggested that low concentrations of DON commonly detected in food may either limit or sustain the proliferation of colon cancer cells, depending on their proliferation status and on DON concentration. Soluble factors released by Lactobacillus strains can partially counteract the inhibitory action of DON on actively proliferating colon cancer cells. The study also emphasized that real-time cellular impedance measurements were a valuable tool for investigating the dynamics of cellular responses to xenobiotics.

  2. The monitoring possibility of some mammalian cells for zinc concentrations on metallic materials.

    Science.gov (United States)

    Ogawa, Akiko; Okuda, Naoaki; Hio, Katsuya; Kanematsu, Hideyuki; Tamauchi, Hidekazu

    2012-05-01

    Zinc plating is widely used to protect steels against corrosion. However, the possibility of a high environmental risk for zinc has been recently discussed among advanced countries and more environmentally-friendly substitutes are required urgently. Therefore, monitoring zinc concentration changes on metallic materials such as steel is very important. We chose to measure zinc concentration changes in some mammalian cells and confirmed that V79 cells were highly sensitive to changes in zinc concentrations. In this study, the following process was applied to the proprietary production for tin-zinc alloy films on steel using V79 cells. Specimens were immersed in PBS to produce extracts. Zinc concentrations in the extracts almost corresponded to zinc concentrations on steel surfaces. When extracts were added to a V79 cell culture, colony formation was inhibited, and inhibition increased with increases in zinc concentrations. Changes in zinc concentrations on steel surfaces with heat treatment could be monitored relatively well by V79 cells, even though the results were still semi-quantitative.

  3. Beryllium-10 concentrations in water samples of high northern latitudes

    Energy Technology Data Exchange (ETDEWEB)

    Strobl, C.; Eisenhauer, A.; Schulz, V.; Baumann, S.; Mangini, A. [Heidelberger Akademie der Wissenschaften, Heildelberg (Germany); Kubik, P.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    {sup 10}Be concentrations in the water column of high northern latitudes were not available so far. We present different {sup 10}Be profiles from the Norwegian-Greenland Sea, the Arctic Ocean, and the Laptev Sea. (author) 3 fig., 3 refs.

  4. Optimization of Scatterer Concentration in High-Gain Scattering Media

    Institute of Scientific and Technical Information of China (English)

    ZHU Jiu-Gao; ZHU He-Yuan; SUN Die-Chi; DU Ge-Guo; LI Fu-Ming

    2001-01-01

    We report the scatterer concentration-dependent behaviour of laser action in high-gain scattering media. Amodified model of a random laser is proposed to explain the experimental results in good agreement. We mayuse this modified model to design and optimize the random laser system. A further detailed model is needed toquantitatively analyse the far-field distribution of random laser action.

  5. Technique for Outdoor Test on Concentrating Photovoltaic Cells

    Directory of Open Access Journals (Sweden)

    Paola Sansoni

    2015-01-01

    Full Text Available Outdoor experimentation of solar cells is essential to maximize their performance and to assess utilization requirements and limits. More generally tests with direct exposure to the sun are useful to understand the behavior of components and new materials for solar applications in real working conditions. Insolation and ambient factors are uncontrollable but can be monitored to know the environmental situation of the solar exposure experiment. A parallel characterization of the photocells can be performed in laboratory under controllable and reproducible conditions. A methodology to execute solar exposure tests is proposed and practically applied on photovoltaic cells for a solar cogeneration system. The cells are measured with concentrated solar light obtained utilizing a large Fresnel lens mounted on a sun tracker. Outdoor measurements monitor the effects of the exposure of two multijunction photovoltaic cells to focused sunlight. The main result is the continuous acquisition of the V-I (voltage-current curve for the cells in different conditions of solar concentration and temperature of exercise to assess their behavior. The research investigates electrical power extracted, efficiency, temperatures reached, and possible damages of the photovoltaic cell.

  6. [Toxic effects of high concentrations of ammonia on Euglena gracilis].

    Science.gov (United States)

    Liu, Yan; Shi, Xiao-Rong; Cui, Yi-Bin; Li, Mei

    2013-11-01

    Ammonia is among the common contaminants in aquatic environments. The present study aimed at evaluation of the toxicity of ammonia at high concentration by detecting its effects on the growth, pigment contents, antioxidant enzyme activities, and DNA damage (comet assay) of a unicellular microalga, Euglena gracilis. Ammonia restrained the growth of E. gracilis, while at higher concentrations, ammonia showed notable inhibition effect, the growth at 2 000 mg x L(-1) was restrained to 55.7% compared with that of the control; The contents of photosynthetic pigments and protein went up with increasing ammonia dosage and decreased when the ammonia concentration was above 1000 mg x L(-1); In addition, there was an obvious increase in SOD and POD activities, at higher concentration (2 000 mg x L(-1)), activities of SOD and POD increased by 30.7% and 49.4% compared with those of the control, indicating that ammonia could promote activities of antioxidant enzymes in E. gracilis; The degree of DNA damage observed in the comet assay increased with increasing ammonia concentration, which suggested that high dose of ammonia may have potential mutagenicity on E. gracilis.

  7. Relationship between RFC gene expression and intracellular drug concentration in methotrexate-resistant osteosarcoma cells.

    Science.gov (United States)

    Wang, J J; Li, G J

    2014-07-24

    Osteosarcoma is a primary malignant tumor in adolescents, associated with high mortality and morbidity. The high-dose methotrexate (MTX) chemotherapy used to treat this disease may induce primary or secondary drug resistance, resulting in a reduced effect of comprehensive treatment. In this study, the relationship between reduced folate carrier (RFC) gene expression and intracellular drug concentration in MTX-resistant osteosarcoma cells (Saos-2) was investigated. MTX-resistant human osteosarcoma cells (Saos-2/MTX2.2, Saos-2/MTX4.4) were prepared. The sensitivities of Saos-2 (primary cells), Saos-2/MTX2.2, and Saos-2/MTX4.4 cells to MTX, diamminedichloroplatinum (DDP), ifosfamide (IFO), epirubicine (EPI), adriamycin (ADM), theprubicin (THP), and paclitaxel (PTX) were detected by MTT. The median inhibitory concentration (IC50) and resistance index were measured. Semi-quantitative RT-PCR was used to evaluate the expression of RFC gene in cells. The intracellular (3)H-MTX concentration was determined. Results showed that IC50 of Saos-2/MTX2.2 and Saos-2/MTX4.4 was 4.87 and 12.73 times that of Saos-2, respectively. Both Saos-2/MTX2.2 and Saos-2/MTX4.4 had resistance to IFO, ADM, EPI, THP, and PTX, but not DDP. Compared to Saos-2/MTX2.2 and Saos-2/MTX4.4, the expression of RFC mRNA in Saos-2 was significantly higher. The intracellular (3)H-MTX concentration reached a peak at 50 min. After 70 min, the concentration was maintained at a plateau. During this phase, the (3)H-MTX concentration in Saos-2 cells was 2.15 times higher than the concentration in Saos-2/MTX4.4 cells. The reduced RFC mRNA expression in PTX-resistant osteosarcoma cells may be related to the decrease in intracellular (3)H-MTX concentration.

  8. Low temperature measurements of state-of-the-art concentrator solar cells

    Science.gov (United States)

    Rumyantsev, Valery D.; Chekalin, Alexander V.; Malevskiy, Dmitry A.; Shvarts, Maxim Z.; Andreev, Valery M.

    2015-09-01

    Knowing the temperature behavior of the photovoltaic parameters in multi-junction (MJ) solar cells (SCs) can give information suitable for comparing different cell structures and for estimating a potential of their operation in various environmental conditions. As a rule, the cell structures are designed specifically for terrestrial (with high sunlight concentration), or space (sometimes with relatively low concentration) applications, differing in certain, but not principal, details. Structural improvements introduced in one of the cell types may highlight the effective ways for improvements applicable for another cell type. In this work, a set of the state-of-the-art concentrator triple-junction SCs were investigated to analyze the influence of temperature in a very wide range of -170 ≤ T ≤ +85°C, together with the sunlight concentration ratio variation, on the cell performance. In particular, the PV conversion efficiencies as high as 50 - 52% (AM1.5d) have been measured in the temperature range of -120 - -150°C for the sunlight concentration ratios of C = 50 - 300 suns. Such investigations may be regarded as a tool for revealing the presence of the "parasitic" built-in energy barriers at cell structure optimization.

  9. Bioleaching of marmatite in high concentration of iron

    Institute of Scientific and Technical Information of China (English)

    邱冠周; 吴伯增; 覃文庆; 蓝卓越

    2002-01-01

    Bioleaching of marmatite with a culture of Thiobacillus ferrooxidans and Thiobacillus thiooxidans in high concentration of iron was studied, the results show that the zinc leaching rate of the mixed culture is faster than that of the sole Thiobacillus ferrooxidans, the increasing iron concentration in leaching solution enhances the zinc leaching rate. The SEM analysis indicates that the chemical leaching residues is covered with porous solid layer of elemental sulfur, while elemental sulfur is not found in the bacterial leaching residues. The primary role of bacteria in bioleaching of sphalerite is to oxidize the chemical leaching products of ferrous ion and elemental sulfur, thus the indirect mechanism prevails in the bioleaching of marmatite.

  10. Transcriptional analysis of adaptation to high glucose concentrations in Zymomonas mobilis.

    Science.gov (United States)

    Zhang, Kun; Shao, Huanhuan; Cao, Qinghua; He, Ming-Xiong; Wu, Bo; Feng, Hong

    2015-02-01

    The ethanologenic bacterium Zymomonas mobilis is usually tolerant to high concentrations of glucose. The addition of sorbitol decreases the lag phase and increases ethanol yield and productivity of the bacteria in high glucose concentrations. The molecular mechanisms of adaptation to high glucose concentrations and the effect of sorbitol are still unclear. In this study, microarray analysis was used to study the global transcriptional adaptation responses of Z. mobilis to high glucose concentrations. A total of 235 genes were differentially expressed when 220 g/L glucose was added with or without 10 mM sorbitol. These genes are involved in diverse aspects of cell metabolism and regulation, including membrane transporters, nitrogen metabolism, and plasmid-encoded genes. However, most differentially expressed genes were downregulated when sorbitol was added. Notably, the transcription of almost all genes involved in the Entner-Doudoroff and ethanol production pathways was not significantly affected. In addition, a prophage and a nitrogen-fixation cluster were significantly induced. These results revealed that Z. mobilis cells responded to high glucose concentrations by regulating the transcriptional levels of genes related to membrane channels and transporters, stress response mechanisms, and metabolic pathways. These data provide insight into the intracellular adaptation responses to high glucose concentrations and reveal strategies to engineer efficient ethanol fermentation in Z. mobilis.

  11. Decomposition of high concentration SF6 using an electron beam

    Science.gov (United States)

    Son, Youn-Suk; Lee, Sung-Joo; Choi, Chang Yong; Park, Jun-Hyeong; Kim, Tak-Hyun; Jung, In-Ha

    2016-07-01

    In this study, high concentration SF6 (2-10%) was decomposed using an electron beam irradiation. Various influential factors were investigated to improve the destruction and removal efficiency (DRE) of SF6. The initial concentrations of SF6, absorbed doses, SF6/H2 ratios and retention times were the main factors of concern. As a result, the DRE increased as the adsorbed dose and retention time increased. The DRE of SF6 also increased up to 20% approximately when H2 was added to the reaction mixture. On the other hand, the DRE of SF6 decreased as initial concentrations of SF6 increased. Finally, the main by-product formed from SF6 decomposition by the electron beam was HF.

  12. Planar multijunction high voltage solar cells

    Science.gov (United States)

    Evans, J. C., Jr.; Chai, A. T.; Goradia, C.

    1980-01-01

    Technical considerations, preliminary results, and fabrication details are discussed for a family of high-voltage planar multi-junction (PMJ) solar cells which combine the attractive features of planar cells with conventional or interdigitated back contacts and the vertical multijunction (VMJ) solar cell. The PMJ solar cell is internally divided into many voltage-generating regions, called unit cells, which are internally connected in series. The key to obtaining reasonable performance from this device was the separation of top surface field regions over each active unit cell. Using existing solar cell fabricating methods, output voltages in excess of 20 volts per linear centimeter are possible. Analysis of the new device is complex, and numerous geometries are being studied which should provide substantial benefits in both normal sunlight usage as well as with concentrators.

  13. Life at high salt concentrations, intracellular KCl concentrations, and acidic proteomes

    Directory of Open Access Journals (Sweden)

    Aharon eOren

    2013-11-01

    Full Text Available Extremely halophilic microorganisms that accumulate KCl for osmotic balance (the Halobacteriaceae, Salinibacter have a large excess of acidic amino acids in their proteins. This minireview explores the occurrence of acidic proteomes in halophiles of different physiology and phylogenetic affiliation. For fermentative bacteria of the order Halanaerobiales, known to accumulate KCl, an acidic proteome was predicted. However, this is not confirmed by genome analysis. The reported excess of acidic amino acids is due to a high content of Gln and Asn, which yield Glu and Asp upon acid hydrolysis. The closely related Halorhodospira halophila and Halorhodospira halochloris use different strategies to cope with high salt. The first has an acidic proteome and accumulates high KCl concentrations at high salt concentrations; the second does not accumulate KCl and lacks an acidic proteome. Acidic proteomes can be predicted from the genomes of some moderately halophilic aerobes that accumulate organic osmotic solutes (Halomonas elongata, Chromohalobacter salexigens and some marine bacteria. Based on the information on cultured species it is possible to understand the pI profiles predicted from metagenomic data from hypersaline environments.

  14. Performance of solmacs, a high PV solar concentrator with efficient optics

    Science.gov (United States)

    Thibert, T.; Hellin, M.-L.; Loicq, J.; Mazy, E.; Jacques, L.; Verstraeten, D.; Gillis, J.-M.; Languy, F.; Emmerechts, C.; Beeckman, E.; Habraken, S.; Lecat, J.-H.

    2012-10-01

    A new solar panel with high concentration photovoltaic technology (x700) has been designed, prototyped and tested in the SOLMACS project. The quality of concentrating optics is a key factor for high module efficiency. Therefore new dedicated PMMA Fresnel lenses were studied and produced by injection molding. Lens design, material and production process were optimized to achieve a high optical yield of 86%. Thorough lens performance assessment in optical laboratory was completed with lifetime UV aging tests. Another important aspect is the thermal control of the hot spot created under the solar cell that receives the concentrated flux of 700 Suns. A dedicated heat spreader was developed to achieve passive thermal control with minimum mass and cost. This was supported by thermal models and tests at both cell and module level. 35% triple junction cells were implemented in the module. Micro-assembly technologies were used for the cell packaging and electrical connections. In support to the research, a continuous solar simulator was designed and built to assess the system performance, both at component and module level. The concentrator developments were integrated in a prototype and tested both indoor with the simulator and outdoor on the CSL solar test platform. The overall efficiency of the PV concentrator module is 28.5%.

  15. High-Performance Near-Infrared Luminescent Solar Concentrators.

    Science.gov (United States)

    Rondão, Raquel; Frias, Ana R; Correia, Sandra F H; Fu, Lianshe; de Zea Bermudez, Verónica; André, Paulo S; Ferreira, Rute A S; Carlos, Luís D

    2017-04-12

    Luminescent solar concentrators (LSCs) appear as candidates to enhance the performance of photovoltaic (PV) cells and contribute to reduce the size of PV systems, decreasing, therefore, the amount of material needed and thus the cost associated with energy conversion. One way to maximize the device performance is to explore near-infrared (NIR)-emitting centers, resonant with the maximum optical response of the most common Si-based PV cells. Nevertheless, very few examples in the literature demonstrate the feasibility of fabricating LSCs emitting in the NIR region. In this work, NIR-emitting LSCs are reported using silicon 2,3-naphthalocyanine bis(trihexylsilyloxide) (SiNc or NIR775) immobilized in an organic-inorganic tri-ureasil matrix (t-U(5000)). The photophysical properties of the SiNc dye incorporated into the tri-ureasil host closely resembled those of SiNc in tetrahydrofuran solution (an absolute emission quantum yield of ∼0.17 and a fluorescence lifetime of ∼3.6 ns). The LSC coupled to a Si-based PV device revealed an optical conversion efficiency of ∼1.5%, which is among the largest values known in the literature for NIR-emitting LSCs. The LSCs were posteriorly coupled to a Si-based commercial PV cell, and the synergy between the t-U(5000) and SiNc molecules enabled an effective increase in the external quantum efficiency of PV cells, exceeding 20% in the SiNc absorption region.

  16. Biodegradation studies of oil sludge containing high hydrocarbons concentration

    Energy Technology Data Exchange (ETDEWEB)

    Olguin-Lora, P.; Munoz-Colunga, A.; Castorena-Cortes, G.; Roldan-Carrillo, T.; Quej Ake, L.; Reyes-Avila, J.; Zapata-Penasco, I.; Marin-Cruz, J.

    2009-07-01

    Oil industry has a significant impact on environment due to the emission of, dust, gases, waste water and solids generated during oil production all the way to basic petrochemical product manufacturing stages. the aim of this work was to evaluate the biodegradation of sludge containing high hydrocarbon concentration originated by a petroleum facility. A sludge sampling was done at the oil residuals pool (ORP) on a gas processing center. (Author)

  17. NAD kinase levels control the NADPH concentration in human cells.

    Science.gov (United States)

    Pollak, Nadine; Niere, Marc; Ziegler, Mathias

    2007-11-16

    NAD kinases (NADKs) are vital, as they generate the cellular NADP pool. As opposed to three compartment-specific isoforms in plants and yeast, only a single NADK has been identified in mammals whose cytoplasmic localization we established by immunocytochemistry. To understand the physiological roles of the human enzyme, we generated and analyzed cell lines stably deficient in or overexpressing NADK. Short hairpin RNA-mediated down-regulation led to similar (about 70%) decrease of both NADK expression, activity, and the NADPH concentration and was accompanied by increased sensitivity toward H(2)O(2). Overexpression of NADK resulted in a 4-5-fold increase in the NADPH, but not NADP(+), concentration, although the recombinant enzyme phosphorylated preferentially NAD(+). Surprisingly, NADK overexpression and the ensuing increase of the NADPH level only moderately enhanced protection against oxidant treatment. Apparently, to maintain the NADPH level for the regeneration of oxidative defense systems human cells depend primarily on NADP-dependent dehydrogenases (which re-reduce NADP(+)), rather than on a net increase of NADP. The stable shifts of the NADPH level in the generated cell lines were also accompanied by alterations in the expression of peroxiredoxin 5 and Nrf2. Because the basal oxygen radical level in the cell lines was only slightly changed, the redox state of NADP may be a major transmitter of oxidative stress.

  18. Lowering extracellular chloride concentration alters outer hair cell shape.

    Science.gov (United States)

    Cecola, R P; Bobbin, R P

    1992-08-01

    In general, increasing external K+ concentration, as well as exposure to hypotonic medium, induces a shortening of outer hair cells (OHCs) accompanied by an increase in width and volume. One possible mechanism suggested for these changes is a movement of Cl- and/or water across the cell membrane. We therefore examined the role of Cl- in OHC volume maintenance by testing the effect of decreasing extracellular Cl- concentration on OHC length and shape. In addition, the effect of hypotonic medium was examined. OHCs were isolated from guinea pig cochleae, mechanically dissociated and dispersed, and placed in a modified Hanks balanced salt solution (HBS). Exposing the cells to a Cl(-)-free HBS produced an initial shortening, which was rapidly followed by an increase in length. After about 9 min of exposure to Cl(-)-free HBS, the cells appeared to lose all water and collapsed. Upon return to normal HBS, the OHCs returned to their normal shape. We speculate that the collapse of the OHCs may be due to the loss of intracellular Cl-, which, in turn, resulted in the loss of intracellular K+ and water. The results indicate that Cl- contributes greatly to the maintenance of OHC volume. In addition, we confirmed that isolated OHCs swell in hypotonic medium and maintain their swollen state until returned to normal medium. The mechanism for maintenance of the swollen state is unknown.

  19. Towards quantitative molecular mapping of cells by Raman microscopy: using AFM for decoupling molecular concentration and cell topography.

    Science.gov (United States)

    Boitor, Radu; Sinjab, Faris; Strohbuecker, Stephanie; Sottile, Virginie; Notingher, Ioan

    2016-06-23

    Raman micro-spectroscopy (RMS) is a non-invasive technique for imaging live cells in vitro. However, obtaining quantitative molecular information from Raman spectra is difficult because the intensity of a Raman band is proportional to the number of molecules in the sampled volume, which depends on the local molecular concentration and the thickness of the cell. In order to understand these effects, we combined RMS with atomic force microscopy (AFM), a technique that can measure accurately the thickness profile of the cells. Solution-based calibration models for RNA and albumin were developed to create quantitative maps of RNA and proteins in individual fixed cells. The maps were built by applying the solution-based calibration models, based on partial least squares fitting (PLS), on raster-scan Raman maps, after accounting for the local cell height obtained from the AFM. We found that concentrations of RNA in the cytoplasm of mouse neuroprogenitor stem cells (NSCs) were as high as 25 ± 6 mg ml(-1), while proteins were distributed more uniformly and reached concentrations as high as ∼50 ± 12 mg ml(-1). The combined AFM-Raman datasets from fixed cells were also used to investigate potential improvements for normalization of Raman spectral maps. For all Raman maps of fixed cells (n = 10), we found a linear relationship between the scores corresponding to the first component (PC1) and the cell height profile obtained by AFM. We used PC1 scores to reconstruct the relative height profiles of independent cells (n = 10), and obtained correlation coefficients with AFM maps higher than 0.99. Using this normalization method, qualitative maps of RNA and protein were used to obtain concentrations for live NSCs. While this study demonstrates the potential of using AFM and RMS for measuring concentration maps for individual NSCs in vitro, further studies are required to establish the robustness of the normalization method based on principal component analysis when comparing

  20. Particle sedimentation monitoring in high-concentration slurries

    Science.gov (United States)

    Nagasawa, Yoshihiro; Kato, Zenji; Tanaka, Satoshi

    2016-11-01

    In this study, the sedimentation states of particles in high-concentration slurries were elucidated by monitoring their internal states. We prepared transparent high-concentration silica slurries by adjusting the refractive index of the aqueous glycerol liquid in which the particles were dispersed to match that of the silica particles. In addition, a fluorescent dye was dissolved in the liquid. Then, we directly observed the individual and flocculated particles in the slurries during sedimentation by confocal laser scanning fluorescent microscopy. The particles were found to sediment very slowly while exhibiting fluctuating motion. The particle sedimentation rate in the high-concentration slurry with the aqueous glycerol solution (η =0.068 Pa. s ) and a particle volume fraction on the order of 0.3 was determined to be 1.58 ± 0.66 μ m. min-1 on the basis of the obtained image sequences for 24.9 h. In-situ observation provides a large amount of information about the sedimentation behavior of particles in condensed matter.

  1. An advanced space photovoltaic concentrator array using Fresnel lenses, gallium arsenide cells, and prismatic cell covers

    Science.gov (United States)

    O'Neill, Mark J.; Piszczor, Michael F.

    1988-01-01

    The current status of a space concentrator array which uses refractive optics, gallium arsenide cells, and prismatic cell covers to achieve excellent performance at a very low array mass is documented. The prismatically covered cells have established records for space cell performance (24.2 percent efficient at 100 AM0 suns and 25 C) and terrestrial single-junction cell performance (29.3 percent efficient at 200 AM1.5 suns and 25 C).

  2. ITABIRITE IRON ORE CONCENTRATION BY PNEUMATIC FLOTATION CELL

    Directory of Open Access Journals (Sweden)

    Angelo Quintiliano Nunes da Silva

    2015-06-01

    Full Text Available The main iron ore processing plants in Brazil operate through reverse cationic flotation. Many studies have been conducted in order to improve flotation efficiency by optimization process variables. The pneumatic flotation cell stands out due to the simplicity to and to the intense contact particle/bubble promoted by the pulp feeding system. In this study, laboratory scale and pilot were conducted using a sample of itabirite iron ore. The objectives are evaluating the performance of this device using low grade iron ore, and drawing a comparison with laboratory scale tests on conventional flotation cell. The results indicate the potential application of pneumatic flotation cell to the ore tested. Adjustments in the feed particle size and process optimizations can be performed on the concentrate, reaching Fe and SiO2 grades used by the industry

  3. Hyaluronan scaffold supports osteogenic differentiation of bone marrow concentrate cells.

    Science.gov (United States)

    Cavallo, C; Desando, G; Ferrari, A; Zini, N; Mariani, E; Grigolo, B

    2016-01-01

    Osteochondral lesions are considered a challenge for orthopedic surgeons. Currently, the treatments available are often unsatisfactory and unable to stimulate tissue regeneration. Tissue engineering offers a new therapeutic strategy, taking into account the role exerted by cells, biomaterial and growth factors in restoring tissue damage. In this light, Mesenchymal Stem Cells (MSCs) have been indicated as a fascinating tool for regenerative medicine thanks to their ability to differentiate into bone, cartilage and adipose tissue. However, in vitro-cultivation of MSCs could be associated with some risks such as de-differentiation/reprogramming, infection and contaminations of the cells. To overcome these shortcomings, a new approach is represented by the use of Bone Marrow Concentrate (BMC), that could allow the delivery of cells surrounded by their microenvironment in injured tissue. For this purpose, cells require a tridimensional scaffold that can support their adhesion, proliferation and differentiation. This study is focused on the potentiality of BMC seeded onto a hyaluronan-based scaffold (Hyaff-11) to differentiate into osteogenic lineage. This process depends on the specific interaction between cells derived from bone marrow (surrounded by their niche) and scaffold, that create an environment able to support the regeneration of damaged tissue. The data obtained from the present study demonstrate that BMC grown onto Hyaff-11 are able to differentiate toward osteogenic sense, producing specific osteogenic genes and matrix proteins.

  4. Improved Dispersion of Carbon Nanotubes in Polymers at High Concentrations

    Science.gov (United States)

    Liu, Chao-Xuan; Choi, Jin-Woo

    2012-01-01

    The polymer nanocomposite used in this work comprises elastomer poly(dimethylsiloxane) (PDMS) as a polymer matrix and multi-walled carbon nanotubes (MWCNTs) as a conductive nanofiller. To achieve uniform distribution of carbon nanotubes within the polymer, an optimized dispersion process was developed, featuring a strong organic solvent—chloroform, which dissolved PDMS base polymer easily and allowed high quality dispersion of MWCNTs. At concentrations as high as 9 wt.%, MWCNTs were dispersed uniformly through the polymer matrix, which presented a major improvement over prior techniques. The dispersion procedure was optimized via extended experimentation, which is discussed in detail. PMID:28348312

  5. Feasibility Study on High Concentrating Photovoltaic Power Towers

    Science.gov (United States)

    Frohberger, Dirk; Jaus, Joachim; Wiesenfarth, Maike; Schramek, Philipp; Bett, Andreas W.

    2010-10-01

    This paper presents an analysis on the concept of high concentrating PV power towers. A feasibility study is conducted in order to evaluate the future potential of this technology. Objective of the analysis is to provide an improved basis for establishing research and development priorities for the PV power tower concept. Performance assessments and cost calculations for a 1 MW prototype PV tower power are derived. Based on the assumption of a highly homogeneously illuminated receiver, levelized costs of electricity of 0.29 €/kWh have been calculated for a prototype PV tower power.

  6. Effects of high nitrogen concentrations on the growth of submersed macrophytes at moderate phosphorus concentrations.

    Science.gov (United States)

    Yu, Qing; Wang, Hong-Zhu; Li, Yan; Shao, Jian-Chun; Liang, Xiao-Min; Jeppesen, Erik; Wang, Hai-Jun

    2015-10-15

    Eutrophication of lakes leading to loss of submersed macrophytes and higher turbidity is a worldwide phenomenon, attributed to excessive loading of phosphorus (P). However, recently, the role of nitrogen (N) for macrophyte recession has received increasing attention. Due to the close relationship between N and P loading, disentanglement of the specific effects of these two nutrients is often difficult, and some controversy still exists as to the effects of N. We studied the effects of N on submersed macrophytes represented by Vallisneria natans (Lour.) Hara in pots positioned at three depths (0.4 m, 0.8 m, and 1.2 m to form a gradient of underwater light conditions) in 10 large ponds having moderate concentrations of P (TP 0.03 ± 0.04 mg L(-1)) and five targeted concentrations of total nitrogen (TN) (0.5, 2, 10, 20, and 100 mg L(-1)), there were two ponds for each treatment. To study the potential shading effects of other primary producers, we also measured the biomass of phytoplankton (ChlaPhyt) and periphyton (ChlaPeri) expressed as chlorophyll a. We found that leaf length, leaf mass, and root length of macrophytes declined with increasing concentrations of TN and ammonium, while shoot number and root mass did not. All the measured growth indices of macrophytes declined significantly with ChlaPhyt, while none were significantly related to ChlaPeri. Neither ChlaPhyt nor ChlaPeri were, however, significantly negatively related to the various N concentrations. Our results indicate that shading by phytoplankton unrelated to the variation in N loading and perhaps toxic stress exerted by high nitrogen were responsible for the decline in macrophyte growth.

  7. Fabrication of High Contrast Gratings for the Spectrum Splitting Dispersive Element in a Concentrated Photovoltaic System.

    Science.gov (United States)

    Yao, Yuhan; Liu, He; Wu, Wei

    2015-07-18

    High contrast gratings are designed and fabricated and its application is proposed in a parallel spectrum splitting dispersive element that can improve the solar conversion efficiency of a concentrated photovoltaic system. The proposed system will also lower the solar cell cost in the concentrated photovoltaic system by replacing the expensive tandem solar cells with the cost-effective single junction solar cells. The structures and the parameters of high contrast gratings for the dispersive elements were numerically optimized. The large-area fabrication of high contrast gratings was experimentally demonstrated using nanoimprint lithography and dry etching. The quality of grating material and the performance of the fabricated device were both experimentally characterized. By analyzing the measurement results, the possible side effects from the fabrication processes are discussed and several methods that have the potential to improve the fabrication processes are proposed, which can help to increase the optical efficiency of the fabricated devices.

  8. Wet oxidation of real coke wastewater containing high thiocyanate concentration.

    Science.gov (United States)

    Oulego, Paula; Collado, Sergio; Garrido, Laura; Laca, Adriana; Rendueles, Manuel; Díaz, Mario

    2014-01-01

    Coke wastewaters, in particular those with high thiocyanate concentrations, represent an important environmental problem because of their very low biodegradability. In this work, the treatment by wet oxidation of real coke wastewaters containing concentrations of thiocyanate above 17 mM has been studied in a 1-L semi-batch reactor at temperatures between 453 and 493 K, with total oxygen pressures in the range of 2.0-8.0 MPa. A positive effect of the matrix of real coke wastewater was observed, resulting in faster thiocyanate degradation than was obtained with synthetic wastewaters. Besides, the effect of oxygen concentration and temperature on thiocyanate wet oxidation was more noticeable in real effluents than in synthetic wastewaters containing only thiocyanate. It was also observed that the degree of mineralization of the matrix organic compounds was higher when the initial thiocyanate concentration increased. Taking into account the experimental data, kinetic models were obtained, and a mechanism implying free radicals was proposed for thiocyanate oxidation in the matrix considered. In all cases, sulphate, carbonates and ammonium were identified as the main reaction products of thiocyanate wet oxidation.

  9. Evaluation of various glyphosate concentrations on DNA damage in human Raji cells and its impact on cytotoxicity.

    Science.gov (United States)

    Townsend, Michelle; Peck, Connor; Meng, Wei; Heaton, Matthew; Robison, Richard; O'Neill, Kim

    2017-04-01

    Glyphosate is a highly used active compound in agriculturally based pesticides. The literature regarding the toxicity of glyphosate to human cells has been highly inconsistent. We studied the resulting DNA damage and cytotoxicity of various glyphosate concentrations on human cells to evaluate DNA damaging potential. Utilizing human Raji cells, DNA damage was quantified using the comet assay, while cytotoxicity was further analyzed using MTT viability assays. Several glyphosate concentrations were assessed, ranging from 15 mM to 0.1 μM. We found that glyphosate treatment is lethal to Raji cells at concentrations above 10 mM, yet has no cytotoxic effects at concentrations at or below 100 μM. Treatment concentrations of 1 mM and 5 mM induce statistically significant DNA damage to Raji cells following 30-60 min of treatment, however, cells show a slow recovery from initial damage and cell viability is unaffected after 2 h. At these same concentrations, cells treated with additional compound did not recover and maintained high levels of DNA damage. While the cytotoxicity of glyphosate appears to be minimal for physiologically relevant concentrations, the compound has a definitive cytotoxic nature in human cells at high concentrations. Our data also suggests a mammalian metabolic pathway for the degradation of glyphosate may be present. Copyright © 2017 Elsevier Inc. All rights reserved.

  10. Design and Optimization of Fresnel Lens for High Concentration Photovoltaic System

    Directory of Open Access Journals (Sweden)

    Lei Jing

    2014-01-01

    Full Text Available A practical optimization design is proposed, in which the solar direct light spectrum and multijunction cell response range are taken into account in combination, particularly for the Fresnel concentrators with a high concentration and a small aspect ratio. In addition, the change of refractive index due to temperature variation in outdoor operation conditions is also considered in the design stage. The calculation results show that this novel Fresnel lens achieves an enhancement of energy efficiency of about 10% compared with conventional Fresnel lens for a given solar spectrum, solar cell response, and corrected sunshine hours of different ambient temperature intervals.

  11. A prototypic microfluidic platform generating stepwise concentration gradients for real-time study of cell apoptosis.

    Science.gov (United States)

    Dai, Wen; Zheng, Yizhe; Luo, Kathy Qian; Wu, Hongkai

    2010-04-16

    This work describes the development of a prototypic microfluidic platform for the generation of stepwise concentration gradients of drugs. A sensitive apoptotic analysis method is integrated into this microfluidic system for studying apoptosis of HeLa cells under the influence of anticancer drug, etoposide, with various concentrations in parallel; it measures the yellow fluorescent proteincyan fluorescent protein fluorescence resonance energy transfer (FRET) signal that responds to the activation of caspase-3, an indicator of cell apoptosis. Sets of microfluidic valves on the chip generate stepwise concentration gradient of etoposide in various cell-culture microchambers. The FRET signals from multiple chambers are simultaneously monitored under a fluorescent microscope for long-time observation and the on-chip results are compared with those from 96-well plate study and the methylthiazolyldiphenyl-tetrazolium bromide (MTT) assay. The microfluidic platform shows several advantages including high-throughput capacity, low drug consumption, and high sensitivity.

  12. Determination of Radon concentration in air using scinti-cell radon monitor

    Energy Technology Data Exchange (ETDEWEB)

    Koga, Taeko [Kinki Univ., Higashi-Osaka, Osaka (Japan). Atomic Energy Research Inst; Morishima, Hiroshige; Arai, Naoki; Shiraishi, Masatoshi; Shigehara, Makiko [Dept. of Nuclear Engineering, School of Science and Technology, Kinki Univ., Higashi-Osaka, Osaka(Japan); Mifune, Masaaki

    2000-01-01

    This study is carried out the methodology characteristics of {sup 222}Rn (Radon) concentration in air using the scinti-cell radon monitor (Trace environmental level detector (PMT-TEL) and Lucas cell (300 A), Pylon Co. and the determination of Radon concentrations in air on Misasa spa area in Tottori pref. and Ikeda spa in Shimane pref. on November 1995 and 1996. We have reached to the following results; (1) Minimum detectable Radon concentrations in air using the scinti-cell monitor are 7.6 Bq/m{sup 3} with 23% of accuracy (relative standard deviation) on the grab sampling of Lucas cell and 0.58 Bq/m{sup 3} with that of 17% on the continuous measuring of PMT-TEL, when it measured after 3.5 hours on the air sampling to determine the mean radon concentrations. The radon concentrations by the PMT-TEL method is about ten times more detectable than those by Lucas cell, that the former is the most sensitive among the detectors used on this research and is able to detect low level environmental concentrations, particularly outdoor and the later is valuable to use conveniently and portably on grab spot sampling of high level radon concentrations indoor air. (2) On the comparison of characteristics on spot monitoring of radon in air, a pico-rad method is suitable for the determination of the mean concentration for continuous sampling period by PMT-TEL and Lucas cell 300 A, and the variation of radon concentration can be observed on elapse of time course. (author)

  13. Strategies for the production of high concentrations of bioethanol from seaweeds: production of high concentrations of bioethanol from seaweeds.

    Science.gov (United States)

    Yanagisawa, Mitsunori; Kawai, Shigeyuki; Murata, Kousaku

    2013-01-01

    Bioethanol has attracted attention as an alternative to petroleum-derived fuel. Seaweeds have been proposed as some of the most promising raw materials for bioethanol production because they have several advantages over lignocellulosic biomass. However, because seaweeds contain low contents of glucans, i.e., polysaccharides composed of glucose, the conversion of only the glucans from seaweed is not sufficient to produce high concentrations of ethanol. Therefore, it is also necessary to produce ethanol from other specific carbohydrate components of seaweeds, including sulfated polysaccharides, mannitol, alginate, agar and carrageenan. This review summarizes the current state of research on the production of ethanol from seaweed carbohydrates for which the conversion of carbohydrates to sugars is a key step and makes comparisons with the production of ethanol from lignocellulosic biomass. This review provides valuable information necessary for the production of high concentrations of ethanol from seaweeds.

  14. High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrator Application

    Energy Technology Data Exchange (ETDEWEB)

    Hubbard, Seth

    2012-09-12

    The High Efficiency Nanostructured III-V Photovoltaics for Solar Concentrators project seeks to provide new photovoltaic cells for Concentrator Photovoltaics (CPV) Systems with higher cell efficiency, more favorable temperature coefficients and less sensitivity to changes in spectral distribution. The main objective of this project is to provide high efficiency III-V solar cells that will reduce the overall cost per Watt for power generation using CPV systems.This work is focused both on a potential near term application, namely the use of indium arsenide (InAs) QDs to spectrally "tune" the middle (GaAs) cell of a SOA triple junction device to a more favorable effective bandgap, as well as the long term goal of demonstrating intermediate band solar cell effects. The QDs are confined within a high electric field i-region of a standard GaAs solar cell. The extended absorption spectrum (and thus enhanced short circuit current) of the QD solar cell results from the increase in the sub GaAs bandgap spectral response that is achievable as quantum dot layers are introduced into the i-region. We have grown InAs quantum dots by OMVPE technique and optimized the QD growth conditions. Arrays of up to 40 layers of strain balanced quantum dots have been experimentally demonstrated with good material quality, low residual stain and high PL intensity. Quantum dot enhanced solar cells were grown and tested under simulated one sun AM1.5 conditions. Concentrator solar cells have been grown and fabricated with 5-40 layers of QDs. Testing of these devices show the QD cells have improved efficiency compared to baseline devices without QDs. Device modeling and measurement of thermal properties were performed using Crosslight APSYS. Improvements in a triple junction solar cell with the insertion of QDs into the middle current limiting junction was shown to be as high as 29% under one sun illumination for a 10 layer stack QD enhanced triple junction solar cell. QD devices have strong

  15. Generation of high-titer viral preparations by concentration using successive rounds of ultracentrifugation

    Directory of Open Access Journals (Sweden)

    Ichim Christine V

    2011-08-01

    Full Text Available Abstract Background Viral vectors provide a method of stably introducing exogenous DNA into cells that are not easily transfectable allowing for the ectopic expression or silencing of genes for therapeutic or experimental purposes. However, some cell types, in particular bone marrow cells, dendritic cells and neurons are difficult to transduce with viral vectors. Successful transduction of such cells requires preparation of highly concentrated viral stocks, which permit a high virus concentration and multiplicity of infection (MOI during transduction. Pseudotyping with the vesicular stomatitis virus G (VSV-G envelope protein is common practice for both lentiviral and retroviral vectors. The VSV-G glycoprotein adds physical stability to retroviral particles, allowing concentration of virus by high-speed ultracentrifugation. Here we describe a method report for concentration of virus from large volumes of culture supernatant by means of successive rounds of ultracentrifugation into the same ultracentrifuge tube. Method Stable retrovirus producer cell lines were generated and large volumes of virus-containing supernatant were produced. We then tested the transduction ability of virus following varying rounds of concentration by ultra-centrifugation. In a second series of experiments lentivirus-containing supernatant was produced by transient transfection of 297T/17 cells and again we tested the transduction ability of virus following multiple rounds of ultra-centrifugation. Results We report being able to centrifuge VSV-G coated retrovirus for as many as four rounds of ultracentrifugation while observing an additive increase in viral titer. Even after four rounds of ultracentrifugation we did not reach a plateau in viral titer relative to viral supernatant concentrated to indicate that we had reached the maximum tolerated centrifugation time, implying that it may be possible to centrifuge VSV-G coated retrovirus even further should it be necessary

  16. Self-assembling semicrystalline polymer into highly ordered, microscopic concentric rings by evaporation.

    Science.gov (United States)

    Byun, Myunghwan; Hong, Suck Won; Zhu, Lei; Lin, Zhiqun

    2008-04-01

    A drop of semicrystalline polymer, poly(ethylene oxide) (PEO), solution was placed in a restricted geometry consisting of a sphere on a flat substrate (i.e., sphere-on-flat geometry). Upon solvent evaporation from the sphere-on-flat geometry, microscopic concentric rings of PEO with appropriate high molecular weight were produced via controlled, repetitive pinning ("stick") and depinning ("slip") cycles of the contact line. The evaporation-induced concentric rings of PEO exhibited a fibrillar-like surface morphology. Subsequent isothermal crystallization of rings at 40 and 58 degrees C led to the formation of multilayer of flat-on lamellae (i.e., spiral morphology). In between adjacent spirals, depletion zones were developed during crystallization, as revealed by AFM measurements. The present highly ordered, concentric PEO rings may serve as a platform to study cell adhesion and motility, neuron guidance, cell mechanotransduction, and other biological processes.

  17. Different concentrations of kaempferol distinctly modulate murine embryonic stem cell function.

    Science.gov (United States)

    Correia, Marcelo; Rodrigues, Ana S; Perestrelo, Tânia; Pereira, Sandro L; Ribeiro, Marcelo F; Sousa, Maria I; Ramalho-Santos, João

    2016-01-01

    Kaempferol (3,4',5,7-tetrahydroxyflavone) is a natural flavonoid with several beneficial and protective effects. It has been demonstrated that kaempferol has anticancer properties, particularly due to its effects on proliferation, apoptosis and the cell cycle. However, possible effects on pluripotent embryonic stem cell function have not yet been addressed. Embryonic stem cells have the ability to self-renew and to differentiate into all three germ layers with potential applications in regenerative medicine and in vitro toxicology. We show that exposure of murine embryonic stem cells (mESC) to high concentrations of kaempferol (200 μM) leads to decreased cell numbers, although the resulting smaller cell colonies remain pluripotent. However, lower concentrations of this compound (20 μM) increase the expression of pluripotency markers in mESCs. Mitochondrial membrane potential and mitochondrial mass are not affected, but a dose-dependent increase in apoptosis takes place. Moreover, mESC differentiation is impaired by kaempferol, which was not related to apoptosis induction. Our results show that low concentrations of kaempferol can be beneficial for pluripotency, but inhibit proper differentiation of mESCs. Additionally, high concentrations induce apoptosis and increase mitochondrial reactive oxygen species (ROS).

  18. Low-Concentration-Ratio Solar-Cell Arrays

    Science.gov (United States)

    Biss, M. S.; Reed, David A., Jr.

    1986-01-01

    Paper presents design concept for mass-producible arrays of solar electric batteries and concentrators tailored to individual requirements. Arrays intended primarily for space stations needing about 100 kW of power. However, modular, lightweight, compact, and relatively low-cost design also fulfill requirements of some terrestrial applications. Arrays built with currently available materials. Pultrusions, injectionmolded parts, and composite materials used extensively to keep weight low. For added flexibility in design and construction, silicon and gallium arsenide solar-cell panels interchangeable.

  19. Neutron Imaging of Lithium Concentration in Battery Pouch Cells

    Science.gov (United States)

    2011-06-01

    Street, San Francisco, CA, USA June 29 - July 01, 2011 978-1-4577-0079-8/11/$26.00 ©2011 AACC 376 Report Documentation Page Form ApprovedOMB No. 0704...erroneous estimate of the change in lithium concentration. Therefore methods developed in subsection III-C are used to estimate and correct for the...Boillat, G. Scherrer, and G. Frei, “Fuel cell studies with neutrons at the psi’s neutron imaging facilities,” Nucl. Instrum. Methods Phys. Res., Sect. A

  20. Concentration effects of grape seed extracts in anti-oral cancer cells involving differential apoptosis, oxidative stress, and DNA damage.

    Science.gov (United States)

    Yen, Ching-Yu; Hou, Ming-Feng; Yang, Zhi-Wen; Tang, Jen-Yang; Li, Kun-Tzu; Huang, Hurng-Wern; Huang, Yu-Hsuan; Lee, Sheng-Yang; Fu, Tzu-Fun; Hsieh, Che-Yu; Chen, Bing-Hung; Chang, Hsueh-Wei

    2015-03-29

    Grape seeds extract (GSE) is a famous health food supplement for its antioxidant property. Different concentrations of GSE may have different impacts on cellular oxidative/reduction homeostasis. Antiproliferative effect of GSE has been reported in many cancers but rarely in oral cancer. The aim of this study is to examine the antioral cancer effects of different concentrations of GSE in terms of cell viability, apoptosis, reactive oxygen species (ROS), mitochondrial function, and DNA damage. High concentrations (50-400 μg/ml) of GSE dose-responsively inhibited proliferation of oral cancer Ca9-22 cells but low concentrations (1-10 μg/ml) of GSE showed a mild effect in a MTS assay. For apoptosis analyses, subG1 population and annexin V intensity in high concentrations of GSE-treated Ca9-22 cells was increased but less so at low concentrations. ROS generation and mitochondrial depolarization increased dose-responsively at high concentrations but showed minor changes at low concentrations of GSE in Ca9-22 cells. Additionally, high concentrations of GSE dose-responsively induced more γH2AX-based DNA damage than low concentrations. Differential concentrations of GSE may have a differentially antiproliferative function against oral cancer cells via differential apoptosis, oxidative stress and DNA damage.

  1. Chronic Diarrhea Associated with High Teriflunomide Blood Concentration

    OpenAIRE

    Duquette, André; Frenette, Anne Julie; Doré, Maxime

    2016-01-01

    Objective To report the case of a patient treated with leflunomide that presented with chronic diarrhea associated with high teriflunomide blood concentration. Case Summary An 84-year-old woman taking leflunomide 20 mg once daily for the past 2 years to treat rheumatoid arthritis (RA) was investigated for severe chronic diarrhea that had been worsening for the past 5 months. The patient’s general condition progressively deteriorated and included electrolyte imbalances and a transient loss of ...

  2. Effect of high soil copper concentration on mycorrhizal grapevines

    Science.gov (United States)

    Nogales, Amaia; Santos, Erika S.; Viegas, Wanda; Aran, Diego; Pereira, Sofia H.; Vidigal, Patricia; Lopes, Carlos M.; Abreu, M. Manuela

    2017-04-01

    Repeated application of Copper (Cu) based fungicides in vineyards since the end of the 19th century has led to a significant increase in the concentration of this chemical element in many viticultural soils. Although Cu is an essential micronutrient for most organisms, it can be toxic for the development and survival of plants and soil (micro)organisms at high concentrations and eventually lead to yield loses in viticulture, as it negatively affects key physiological and biogeochemical processes. However, some soil microorganisms, including arbuscular mycorrhizal fungi (AMF), have developed adaptive mechanisms for persistence in environments with supra-optimal levels of essential elements or in the presence of harmful ones, as well as for increasing plant tolerance to such abiotic stress conditions. The objective of this work was to evaluate the effect of a high total soil concentration of Cu on microbial soil activity as well as on the development of mycorrhizal and non-mycorrhizal grapevines. A microcosm assay was set up under greenhouse and controlled conditions. Touriga Nacional grapevine variety plants grafted onto 1103P rootstocks were inoculated either with the AMF Rhizophagus irregularis or Funneliformis mosseae, or were left as non-inoculated controls. After three months, they were transplanted to containers filled with 4 kg of a sandy soil (pH: 7.0; electrical conductivity: 0.08 mS/cm; [organic C]: 5.6 g/kg; [N-NO3]: 1.1 mg/kg; [N-NH4]: 2.5 mg/kg; [extractable K]: 45.1 mg/kg; [extractable P]: 52.3 mg/kg), collected near to a vineyard in Pegões (Portugal). Two treatments were carried out: with and without Cu application. The soil with high Cu concentration was prepared by adding 300 mg Cu/kg (in the form of an aqueous solution of CuSO4·5H2O) followed by an incubation during four weeks in plastic bags at room temperature in dark. Physico-chemical soil characteristics (pH, electrical conductivity and nutrients concentration in available fraction), soil

  3. Particulate Matter Concentrations in East Oakland's High Street Corridor

    Science.gov (United States)

    Lei, P.; Jackson, J.; Lewis, R.; Marigny, A.; Mitchell, J. D.; Nguyen, R.; Philips, B.; Randle, D.; Romero, D.; Spears, D.; Telles, C.; Weissman, D.

    2012-12-01

    Particulate matter (PM) is a complex mixture of small solid pieces and/or liquid droplets in the air. High concentrations of PM can pose a serious health hazard because inhalation can result in breathing problems and/or aggravate asthma. Long term exposure can increase the likelihood of respiratory problems like asthma and emphysema as well as cancer. The smaller the particles, the deeper they can get into the respiratory system. For this reason, the smallest particles, those smaller than 2.5 micrometers in diameter (PM2.5), are the most dangerous. PM2.5 is largely emitted from motor vehicles burning fuels that don't break down fully. Our research team investigated the levels of PM2.5 as well as particles smaller than 10 micrometers (PM10) and total suspended particulate (TSP) along the northeast-southwest trending High Street Corridor, near Fremont High School in East Oakland, California. Using the Aerocet 531 mass particle counter, team members walked through neighborhoods and along major roads within a 1 mile radius of Fremont High School. The Aerocet 531 recorded two minute average measurements of all the relevant PM sizes, which are reported in mg/m3. Measurements were consistently taken in the morning, between 8:30 and 11:30 am. Preliminary results indicate maximum readings of all PM sizes at sites that are in close proximity to a major freeway (Interstate-880). These results support our initial hypothesis that proximity to major roads and freeways, especially those with high diesel-fuel burning truck traffic, would be the primary factor affecting PM concentration levels. Preliminary median and maximum readings all suggest particulate matter levels below what the EPA would consider unhealthy or risky.

  4. Does the intracellular ionic concentration or the cell water content (cell volume) determine the activity of TonEBP in NIH3T3 cells?

    DEFF Research Database (Denmark)

    Rødgaard, Tina; Schou, Kenneth; Friis, Martin Barfred

    2008-01-01

    of the present investigation was to investigate whether cell shrinkage or high intracellular ionic concentration induced the activation of TonEBP. We designed a model system for isotonically shrinking cells over a prolonged period of time. Cells swelled in hypotonic medium and performed a regulatory volume......Cl(-) co-transporter, and Gadolinium inhibited shrinkage-activated Na(+) channels. Cells remained shrunken for at least 4 hours (isotonically shrunken cells). The activity of TonEBP was investigated with a Luciferase assay after isotonic shrinkage and after shrinkage in a high NaCl hypertonic medium......(+) than isotonically shrunken cells. This strongly suggested that an increase in intracellular ionic concentration and not cell shrinkage is involved in TonEBP activation....

  5. High manganese concentrations in rocks at Gale crater, Mars

    Science.gov (United States)

    Lanza, Nina L.; Fischer, Woodward W.; Wiens, Roger C.; Grotzinger, John; Ollila, Ann M.; Anderson, Ryan B.; Clark, Benton C.; Gellert, Ralf; Mangold, Nicolas; Maurice, Sylvestre; Le Mouélic, Stéphane; Nachon, Marion; Schmidt, Mariek E.; Berger, Jeffrey; Clegg, Samuel M.; Forni, Olivier; Hardgrove, Craig; Melikechi, Noureddine; Newsom, Horton E.; Sautter, Violaine

    2014-01-01

    The surface of Mars has long been considered a relatively oxidizing environment, an idea supported by the abundance of ferric iron phases observed there. However, compared to iron, manganese is sensitive only to high redox potential oxidants, and when concentrated in rocks, it provides a more specific redox indicator of aqueous environments. Observations from the ChemCam instrument on the Curiosity rover indicate abundances of manganese in and on some rock targets that are 1–2 orders of magnitude higher than previously observed on Mars, suggesting the presence of an as-yet unidentified manganese-rich phase. These results show that the Martian surface has at some point in time hosted much more highly oxidizing conditions than has previously been recognized.

  6. Source identification of high glyme concentrations in the Oder River.

    Science.gov (United States)

    Stepien, D K; Püttmann, W

    2014-05-01

    The objective of the following study was to identify the source of high concentrations of glycol diethers (diglyme, triglyme, and tetraglyme) in the Oder River. Altogether four sampling campaigns were conducted and over 50 surface samples collected. During the first two samplings of the Oder River in the Oderbruch region (km 626-690), glymes were detected at concentrations reaching 0.065 μg L(-1) (diglyme), 0.54 μg L(-1) (triglyme) and 1.7 μg L(-1) (tetraglyme). The subsequent sampling of the Oder River, from the area close to the source to the Poland-Germany border (about 500 km) helped to identify the possible area of the dominating glyme entry into the river between km 310 and km 331. During that sampling, the maximum concentration of triglyme was 0.46 μg L(-1) and tetraglyme 2.2 μg L(-1); diglyme was not detected. The final sampling focused on the previously identified area of glyme entry, as well as on tributaries of the Oder River. Samples from Czarna Woda stream and Kaczawa River contained even higher concentrations of diglyme, triglyme, and tetraglyme, reaching 5.2 μg L(-1), 13 μg L(-1) and 81 μg L(-1), respectively. Finally, three water samples were analyzed from a wastewater treatment plant receiving influents from a Copper Smelter and Refinery; diglyme, triglyme, and tetraglyme were present at a maximum concentration of 1700 μg L(-1), 13,000 μg L(-1), and 190,000 μg L(-1), respectively. Further research helped to identify the source of glymes in the wastewater. The gas desulfurization process Solinox uses a mixture of glymes (Genosorb(®)1900) as a physical absorption medium to remove sulfur dioxide from off-gases from the power plant. The wastewater generated from the process and from the maintenance of the equipment is initially directed to the wastewater treatment plant where it undergoes mechanical and chemical treatment processes before being discharged to the tributaries of the Oder River. Although monoglyme was

  7. Taxol induces concentration-dependent phosphatidylserine (PS) externalization and cell cycle arrest in ASTC-a-1 cells

    Science.gov (United States)

    Guo, Wen-jing; Chen, Tong-sheng

    2010-02-01

    Taxol (Paclitaxel) is an important natural product for the treatment of solid tumors. Different concentrations of taxol can trigger distinct effects on both the cellular microtubule network and biochemical pathways. Apoptosis induced by low concentrations (5-30 nM) of taxol was associated with mitotic arrest, alteration of microtubule dynamics and/or G2/M cell cycle arrest, whereas high concentrations of this drug (0.2-30 μM) caused significant microtubule damage, and was found recently to induce cytoplasm vacuolization in human lung adenocarcinoma (ASTC-a-1) cells. In present study, cell counting kit (CCK-8) assay, confocal microscope, and flow cytometry analysis were used to analyze the cell death form induced by 35 nM and 70 μM of taxol respectively in human lung adenocarcinoma (ASTC-a-1) cells. After treatment of 35 nM taxol for 48 h, the OD450 value was 0.80, and 35 nM taxol was found to induce dominantly cell death in apoptotic pathway such as phosphatidylserine (PS) externalization, G2/M phase arrest after treatment for 24 h, and nuclear fragmentation after treatment for 48 h. After 70 μM taxol treated the cell for 24 h, the OD450 value was 1.01, and 70 μM taxol induced cytoplasm vacuolization programmed cell death (PCD) and G2/M phase as well as the polyploidy phase arrest in paraptotic-like cell death. These findings imply that the regulated signaling pathway of cell death induced by taxol is dependent on taxol concentration in ASTC-a-1 cells.

  8. Ozone sonde cell current measurements and implications for observations of near-zero ozone concentrations in the tropical upper troposphere

    OpenAIRE

    H. Vömel; K. Diaz

    2009-01-01

    Laboratory measurements of the Electrochemical Concentration Cell (ECC) ozone sonde cell current using ozone free air as well as defined amounts of ozone reveal that background current measurements during sonde preparation are neither constant as a function of time, nor constant as a function of ozone concentration. Using a background current, measured at a defined timed after exposure to high ozone may often overestimate the real background, leading to artificially low ozone concentrations i...

  9. Membrane processes application on the Symphytum officinale and Geranium robertianum extracts concentration to obtain high antioxidative activity compounds

    Directory of Open Access Journals (Sweden)

    Paun Gabriela

    2012-01-01

    Full Text Available The paper reports the successful application of membranes processes to obtain the good quality extracts with compounds of high antioxidative activity and therapeutic value. This study provided investigations on the phenolic compounds from two plant species used in Romanian ethno-medicine and evaluated the antioxidant and cytotoxic activities. Three extracts prepared from Geranium robertianum and Symphytum officinale were concentrated by microfiltration and ultrafiltration. The levels of phenolic compounds and flavonoids were determined by UV-Vis spectroscopy and HPLC. The freeradical scavenging activity of concentrated extracts was determined by DPPH method. The preliminary tests of cytotoxic activity for the concentrated extracts have been carried out on human epidermoid laryngeal carcinoma cell line (Hep-2p and normal monkey kidneys cells (RM. The results showed that all concentrated extracts had a very low cytotoxicity against healthy cells, but a significant cytotoxic effect on Hep-2p tumor cells. The concentrated extracts have a high antioxidant activity (% DPPH inhibition > 80%.

  10. Analysis and evaluation for practical application of photovoltaic power generation system. Analysis and evaluation for extra-high efficiency solar cells (research on new concentrator modules); Taiyoko hatsuden system jitsuyoka no tame no kaiseki hyoka. Chokokoritsu taiyo denchi no gijutsu kaihatsu no tame no kaiseki hyoka (shingata shuko module)

    Energy Technology Data Exchange (ETDEWEB)

    Tanimoto, J.; Sakuta, K.; Sawada, S.; Yaoita, A. [Electrotechnical Laboratory, Tsukuba (Japan)

    1994-12-01

    Described herein are the results of the FY1994 research program for analysis and evaluation of concentrator modules for extra-high efficiency solar cells. The outdoor exposure tests have been under way for 3 years for fluorescent plates, as part of the research program for development of materials and elementary techniques, and essentially no degradation has been observed by the perylene pigment test. Coupling of the fluorescent concentrator and solar cell units is investigated for the coupling position and method, to theoretically analyze geometrical coupling efficiency, where they are coupled at the bottom faces in consideration of easiness of module fabrication. It is demonstrated that a high coupling efficiency can be realized when the cell is sufficiently wide relative to thickness of the fluorescent plate. The coupling method is experimentally examined using transparent silicon gel. A prototype module having the same size as the commercial module (420mm by 960mm) is made on a trial basis, where a total of nine 20mm-thick cells are cut out of a single-crystalline silicon solar cell, 100mm by 100mm in size, and are connected to concentrators at the bottom faces. It shows 2.3 times increased output by the test using a large-area solar simulator. 2 figs.

  11. High-sensitivity in situ QCLAS-based ammonia concentration sensor for high-temperature applications

    Science.gov (United States)

    Peng, W. Y.; Sur, R.; Strand, C. L.; Spearrin, R. M.; Jeffries, J. B.; Hanson, R. K.

    2016-07-01

    A novel quantum cascade laser (QCL) absorption sensor is presented for high-sensitivity in situ measurements of ammonia (hbox {NH}_3) in high-temperature environments, using scanned wavelength modulation spectroscopy (WMS) with first-harmonic-normalized second-harmonic detection (scanned WMS-2 f/1 f) to neutralize the effect of non-absorption losses in the harsh environment. The sensor utilized the sQ(9,9) transition of the fundamental symmetric stretch band of hbox {NH}_3 at 10.39 {\\upmu }hbox {m} and was sinusoidally modulated at 10 kHz and scanned across the peak of the absorption feature at 50 Hz, leading to a detection bandwidth of 100 Hz. A novel technique was used to select an optimal WMS modulation depth parameter that reduced the sensor's sensitivity to spectral interference from hbox {H}_2hbox {O} and hbox {CO}_2 without significantly sacrificing signal-to-noise ratio. The sensor performance was validated by measuring known concentrations of hbox {NH}_3 in a flowing gas cell. The sensor was then demonstrated in a laboratory-scale methane-air burner seeded with hbox {NH}_3, achieving a demonstrated detection limit of 2.8 ± 0.26 ppm hbox {NH}_3 by mole at a path length of 179 cm, equivalence ratio of 0.6, pressure of 1 atm, and temperatures of up to 600 K.

  12. Catalytic wet air oxidation of high concentration pharmaceutical wastewater.

    Science.gov (United States)

    Zhan, Wei; Wang, Xiaocong; Li, Daosheng; Ren, Yongzheng; Liu, Dongqi; Kang, Jianxiong

    2013-01-01

    In this study, we investigated the pretreatment of a high concentration pharmaceutical wastewater by catalytic wet air oxidation (CWAO) process. Different experiments were conducted to investigate the effects of the catalyst type, operating temperature, initial system pH, and oxygen partial pressure on the oxidation of the wastewater. Results show that the catalysts prepared by the co-precipitation method have better catalytic activity compared to others. Chemical oxygen demand (COD) conversion increased with the increase in temperature from 160 to 220 °C and decreased with the increase in pH. Moreover, the effect of the oxygen partial pressure on the COD conversion was significant only during the first 20 min of the reaction. Furthermore, the biodegradability of the wastewater improved greatly after CWAO, the ratio of BOD5/COD increased less than 0.1-0.75 when treated at 220 °C (BOD: biochemical oxygen demand).

  13. Acquisition and Analysis of Data from High Concentration Solutions

    KAUST Repository

    Besong, Tabot M.D.

    2016-05-13

    The problems associated with ultracentrifugal analysis of macromolecular solutions at high (>10 mg/ml) are reviewed. Especially for the case of solutes which are non-monodisperse, meaningful results are not readily achievable using sedimentation velocity approaches. It is shown however by both simulation and analysis of practical data that using a modified form of an algorithm (INVEQ) published in other contexts, sedimentation equilibrium (SE) profiles can be analysed successfully, enabling topics such as oligomer presence or formation to be defined.To achieve this, it is necessary to employ an approach in which the solution density, which in an SE profile is radius-dependent, is taken into consideration. Simulation suggests that any reasonable level of solute concentration can be analysed.

  14. Development of a microfluidic device for cell concentration and blood cell-plasma separation.

    Science.gov (United States)

    Maria, M Sneha; Kumar, B S; Chandra, T S; Sen, A K

    2015-12-01

    This work presents design, fabrication and test of a microfluidic device which employs Fahraeus-Lindqvist and Zweifach-Fung effects for cell concentration and blood cell-plasma separation. The device design comprises a straight main channel with a series of branched channels placed symmetrically on both sides of the main channel. The design implements constrictions before each junction (branching point) in order to direct cells that would have migrated closer to the wall (naturally or after liquid extraction at a junction) towards the centre of the main channel. Theoretical and numerical analysis are performed for design of the microchannel network to ensure that a minimum flow rate ratio (of 2.5:1, main channel-to-side channels) is maintained at each junction and predict flow rate at the plasma outlet. The dimensions and location of the constrictions were determined using numerical simulations. The effect of presence of constrictions before the junctions was demonstrated by comparing the performances of the device with and without constrictions. To demonstrate the performance of the device, initial experiments were performed with polystyrene microbeads (10 and 15 μm size) and droplets. Finally, the device was used for concentration of HL60 cells and separation of plasma and cells in diluted blood samples. The cell concentration and blood-plasma purification efficiency was quantified using Haemocytometer and Fluorescence-Activated Cell Sorter (FACS). A seven-fold cell concentration was obtained with HL60 cells and a purification efficiency of 70 % and plasma recovery of 80 % was observed for diluted (1:20) blood sample. FACS was used to identify cell lysis and the cell viability was checked using Trypan Blue test which showed that more than 99 % cells are alive indicating the suitability of the device for practical use. The proposed device has potential to be used as a sample preparation module in lab on chip based diagnostic platforms.

  15. Rheological properties of highly concentrated protein-stabilized emulsions.

    Science.gov (United States)

    Dimitrova, Tatiana D; Leal-Calderon, Fernando

    2004-05-20

    We prepared concentrated quasi monodisperse hexadecane-in-water emulsions stabilized by various proteins and investigated their rheological properties. Some protein-stabilized emulsions possess remarkably high elasticity and at the same time they are considerably fragile--they exhibit coalescence at yield strain and practically do not flow. The elastic storage modulus G' and the loss modulus G" of the emulsions were determined for different oil volume fractions above the random close packing. Surprisingly, the dimensionless elastic moduli G'/(sigma/a), sigma being the interfacial tension, and a being the mean drop radius, obtained for emulsions stabilized by different proteins do not collapse on a single master curve. They are almost always substantially higher than the corresponding values obtained for equivalent Sodium Dodecyl Sulfate (SDS)-stabilized emulsions. The unusually high elasticity cannot be attributed to a specificity of the continuous phase, because the osmotic equation of state of our emulsions is found identical to the one obtained for samples stabilized by classical surfactants. In parallel, we mimicked the thin films that separate the droplets in the concentrated emulsion and found that the protein adsorption layers contain a substantial number of sticky surface aggregates. These severely obstruct local rearrangements of individual drops in respect to their neighbors which leads to coalescence at yield strain. Furthermore, we found that G'/(sigma/a) is correlated (for a given oil volume fraction) to the dilatational elastic modulus, of the protein layer adsorbed on the droplets. The intrinsic elasticity of the protein layers, together with the blocked local rearrangements are considered as the main factors determining the unusual bulk elasticity of the studied emulsions.

  16. Do high concentrations of microcystin prevent Daphnia control of phytoplankton?

    Science.gov (United States)

    Chislock, Michael F; Sarnelle, Orlando; Jernigan, Lauren M; Wilson, Alan E

    2013-04-15

    Toxin-producing cyanobacteria have frequently been hypothesized to limit the ability of herbivorous zooplankton (such as Daphnia) to control phytoplankton biomass by inhibiting feeding, and in extreme cases, causing zooplankton mortality. Using limnocorral experiments in hyper-eutrophic ponds located in Alabama and Michigan (U.S.A.), we tested the hypothesis that high levels of cyanobacteria and microcystin, a class of hepatotoxins produced by several cyanobacterial genera, prevent Daphnia from strongly reducing phytoplankton abundance. At the start of the first experiment (Michigan), phytoplankton communities were dominated by toxic Microcystis and Anabaena (∼96% of total phytoplankton biomass), and concentrations of microcystin were ∼3 μg L⁻¹. Two weeks after adding Daphnia pulicaria from a nearby eutrophic lake, microcystin levels increased to ∼6.5 μg L⁻¹, yet Daphnia populations increased exponentially (r = 0.24 day⁻¹). By the third week, Daphnia had suppressed phytoplankton biomass by ∼74% relative to the no Daphnia controls and maintained reduced phytoplankton biomass until the conclusion of the five-week experiment. In the second experiment (Alabama), microcystin concentrations were greater than 100 μg L⁻¹, yet a mixture of three D. pulicaria clones from eutrophic lakes in southern MI increased and again reduced phytoplankton biomass, in this case by over 80%. The ability of Daphnia to increase in abundance and suppress phytoplankton biomass, despite high initial levels of cyanobacteria and microcystin, indicates that the latter does not prevent strong control of phytoplankton biomass by Daphnia genotypes that are adapted to environments with abundant cyanobacteria and associated cyanotoxins.

  17. Highly Concentrated Acetic Acid Poisoning: 400 Cases Reviewed

    Directory of Open Access Journals (Sweden)

    Konstantin Brusin

    2012-12-01

    Full Text Available Background: Caustic substance ingestion is known for causing a wide array of gastrointestinal and systemic complications. In Russia, ingestion of acetic acid is a major problem which annually affects 11.2 per 100,000 individuals. The objective of this study was to report and analyze main complications and outcomes of patients with 70% concentrated acetic acid poisoning. Methods: This was a retrospective study of patients with acetic acid ingestion who were treated at Sverdlovsk Regional Poisoning Treatment Center during 2006 to 2012. GI mucosal injury of each patient was assessed with endoscopy according to Zargar’s scale. Data analysis was performed to analyze the predictors of stricture formation and mortality. Results: A total of 400 patients with median age of 47 yr were included. GI injury grade I was found in 66 cases (16.5%, IIa in 117 (29.3%, IIb in 120 (30%, IIIa in 27 (16.7% and IIIb in 70 (17.5%. 11% of patients developed strictures and overall mortality rate was 21%. Main complications were hemolysis (55%, renal injury (35%, pneumonia (27% and bleeding during the first 3 days (27%. Predictors of mortality were age 60 to 79 years, grade IIIa and IIIb of GI injury, pneumonia, stages “I”, “F” and “L” of kidney damage according to the RIFLE scale and administration of prednisolone. Predictors of stricture formation were ingestion of over 100 mL of acetic acid and grade IIb and IIIa of GI injury. Conclusion: Highly concentrated acetic acid is still frequently ingested in Russia with a high mortality rate. Patients with higher grades of GI injury, pneumonia, renal injury and higher amount of acid ingested should be more carefully monitored as they are more susceptible to develop fatal consequences.          

  18. High Performance Perovskite Solar Cells.

    Science.gov (United States)

    Tong, Xin; Lin, Feng; Wu, Jiang; Wang, Zhiming M

    2016-05-01

    Perovskite solar cells fabricated from organometal halide light harvesters have captured significant attention due to their tremendously low device costs as well as unprecedented rapid progress on power conversion efficiency (PCE). A certified PCE of 20.1% was achieved in late 2014 following the first study of long-term stable all-solid-state perovskite solar cell with a PCE of 9.7% in 2012, showing their promising potential towards future cost-effective and high performance solar cells. Here, notable achievements of primary device configuration involving perovskite layer, hole-transporting materials (HTMs) and electron-transporting materials (ETMs) are reviewed. Numerous strategies for enhancing photovoltaic parameters of perovskite solar cells, including morphology and crystallization control of perovskite layer, HTMs design and ETMs modifications are discussed in detail. In addition, perovskite solar cells outside of HTMs and ETMs are mentioned as well, providing guidelines for further simplification of device processing and hence cost reduction.

  19. Effects of water concentration in the coating solution on the wall relaxation rate of octadecyltrichlorosilane coated rubidium vapor cells

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Guiying; Wei, Lihua; Wang, Meiling; Zhao, Kaifeng, E-mail: zhaokf@fudan.edu.cn [Institute of Modern Physics, Department of Nuclear Science and Technology, Fudan University, Shanghai 200433, China and Applied Ion Beam Physics Laboratory, Key Laboratory of the Ministry of Education, Fudan University, Shanghai 200433 (China)

    2015-01-28

    High quality anti-relaxation surface coatings for atomic vapor cells are essential for the preservation of atomic spin coherence and the enhancement of measurement sensitivity. In this paper, we studied the effects of water concentration in octadecyltrichlorosilane (OTS) coating solution on the relaxation rate and its reproducibility of OTS coated Rubidium vapor cells. We found that appropriate water concentration can improve the anti-relaxation performance of OTS coated cells.

  20. Effect of molecular weight and concentration of hyaluronan on cell proliferation and osteogenic differentiation in vitro

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Ningbo, E-mail: curl-zhao@163.com; Wang, Xin, E-mail: 394041230@qq.com; Qin, Lei, E-mail: qinlei30@126.com; Guo, Zhengze, E-mail: zhzeguo@163.com; Li, Dehua, E-mail: lidehuafmmu@163.com

    2015-09-25

    Hyaluronan (HA), the simplest glycosaminoglycan and a major component of the extracellular matrix, exists in various tissues. It is involved in some critical biological procedures, including cellular signaling, cell adhesion and proliferation, and cell differentiation. The effect of molecular weight (MW) and concentration of HA on cell proliferation and differentiation was controversial. In this study, we investigated the effect of MW and concentration of HA on the proliferation and osteogenic differentiation of rabbit bone marrow-derived stem cells in vitro. Results showed that high MW HA decreased the cell adhesion rate in a concentration-dependant manner. The cell adhesion rate was decreased by increasing MW of HA. Cell proliferation was significantly enhanced by low MW HA (P < 0.05). The factorial analysis indicated that MW and concentration had an interactive effect on the cell adhesion rate and cell proliferation (P < 0.05). High MW HA increased the mRNA expressions of ALP, RUNX-2 and OCN. The higher the MW was, the higher the mRNA expressions were. The factorial analysis indicated that MW and concentration had an interactive effect on ALP mRNA expression (P < 0.05). HA of higher MW and higher concentration promoted bone formation. These findings provide some useful information in understanding the mechanism underlying the effect of MW and concentration of HA on cell proliferation and differentiation. - Highlights: • Effect of hyaluronan on cell proliferation and differentiation is evaluated in vitro. • Hyaluronan of low molecular weight increases cell proliferation. • Hyaluronan of high molecular weight promotes cell osteogenic differentiation. • Molecular weight and concentration of hyaluronan show interactive effect.

  1. High concentrations of myeloperoxidase in the equine uterus as an indicator of endometritis.

    Science.gov (United States)

    Parrilla-Hernandez, Sonia; Ponthier, Jérôme; Franck, Thierry Y; Serteyn, Didier D; Deleuze, Stéfan C

    2014-04-15

    Intraluminal fluid and excessive abnormal hyperedema are regularly used for the diagnosis of endometritis in the mare, which is routinely confirmed by the presence of neutrophils on endometrial smears. Studies show a relation between neutrophils and myeloperoxidase (MPO), an enzyme contained in and released by neutrophils during degranulation or after cell lysis. This enzyme has been found in many fluids and tissues, and associated with different inflammatory pathologies in the horse. The aims of this study were to assess the presence and concentration of MPO in the equine uterus, and to investigate its relation with neutrophils, and other clinical signs of endometritis. Mares (n = 51) were evaluated for the presence of intraluminal fluid and excessive endometrial edema before breeding, and a small volume lavage and cytology samples were obtained. From 69 cycles, supernatant of the uterine flushes was analyzed with a specific equine MPO ELISA assay to measure MPO concentration. Cytology samples were used for the diagnosis of endometritis. Myeloperoxidase was present in the uterus of all estrus mares in highly variable concentrations. Myeloperoxidase concentrations were significantly (P < 0.05) higher in samples with positive cytologies and in the presence of intraluminal fluid. Occasionally, some samples with negative cytologies showed high MPO concentration, but the opposite was never observed. Cycles presenting hyperedema weren't associated with high concentration of MPO, intraluminal fluid, or positive cytology, making it a poor diagnostic tool of endometritis.

  2. Ultra-High-Efficiency Multijunction Cell and Receiver Module, Phase 1B: High Performance PV Exploring and Accelerating Ultimate Pathways; Final Subcontract Report, 13 May 2005 - 10 December 2008

    Energy Technology Data Exchange (ETDEWEB)

    King, R. R.

    2010-03-01

    Spectrolab's two High Performance Photovoltaics primary objectives: (1) develop ultra-high-efficiency concentrator multijunction cells and (2) develop a robust concentrator cell receiver package.

  3. Modelling acceptance of sunlight in high and low photovoltaic concentration

    Energy Technology Data Exchange (ETDEWEB)

    Leutz, Ralf, E-mail: ralf.leutz@leopil.com [Leutz Optics and Illumination UG (haftungsbeschränkt), Marburg (Germany)

    2014-09-26

    A simple model incorporating linear radiation characteristics, along with the optical trains and geometrical concentration ratios of solar concentrators is presented with performance examples for optical trains of HCPV, LCPV and benchmark flat-plate PV.

  4. Design philosophy and construction of a high concentration compound parabolic concentrator

    CSIR Research Space (South Africa)

    Roos, TH

    2010-09-01

    Full Text Available A compound parabolic concentrator (CPC) with a concentration ratio of 16:1 is under development at CSIR for volumetric receiver and solar fuels development. The ideal shape has been approximated by 6 and 12 facets in the longitudinal...

  5. Short-term effects of ultrahigh concentration cationic silica nanoparticles on cell internalization, cytotoxicity, and cell integrity with human breast cancer cell line (MCF-7)

    Energy Technology Data Exchange (ETDEWEB)

    Seog, Ji Hyun [Korea Advanced Institute of Science and Technology, Graduate School of Nanoscience and Technology (Korea, Republic of); Kong, Bokyung [Corning Precision Materials (Korea, Republic of); Kim, Dongheun [Korea Advanced Institute of Science and Technology, Graduate School of Nanoscience and Technology (Korea, Republic of); Graham, Lauren M. [University of Maryland, Department of Chemistry and Biochemistry (United States); Choi, Joon Sig [Chungnam National University, Department of Biochemistry (Korea, Republic of); Lee, Sang Bok, E-mail: slee@umd.edu [Korea Advanced Institute of Science and Technology, Graduate School of Nanoscience and Technology (Korea, Republic of)

    2015-01-15

    High concentrations of cationic colloidal silica nanoparticles (CCS-NPs) have been widely used for the enrichment of plasma membrane proteins. However, the interaction between the CCS-NPs and cells under the required concentration for the isolation of plasma membrane are rarely investigated. We evaluated the internalization and toxicity of the 15 nm CCS-NPs which were exposed at high concentrations with short time in human breast cancer cells (MCF-7) with transmission electron microscopy, energy dispersive X-ray spectroscopy, inductively coupled plasma atomic emission spectroscopy, and colorimetric assays. The NPs were observed throughout the cells, particularly in the cytoplasm and the nucleus, after short incubation periods. Additionally, the NPs significantly influenced the membrane integrity of the MCF-7 cells.

  6. High-performance deployable structures for the support of high-concentration ratio solar array modules

    Science.gov (United States)

    Mobrem, M.

    1985-01-01

    A study conducted on high-performance deployable structures for the support of high-concentration ratio solar array modules is discussed. Serious consideration is being given to the use of high-concentration ratio solar array modules or applications such as space stations. These concentrator solar array designs offer the potential of reduced cost, reduced electrical complexity, higher power per unit area, and improved survivability. Arrays of concentrators, such as the miniaturized Cassegrainian concentrator modules, present a serious challenge to the structural design because their mass per unit area (5.7 kg/square meters) is higher than that of flexible solar array blankets, and the requirement for accurate orientation towards the Sun (plus or minus 0.5 degree) requires structures with improved accuracy potentials. In addition, use on a space station requires relatively high structural natural frequencies to avoid deleterious interactions with control systems and other large structural components. The objective here is to identify and evaluate conceptual designs of structures suitable for deploying and accurately supporting high-concentration ratio solar array modules.

  7. Photovoltaic hysteresis and its ramifications for concentrator solar cell design and diagnostics

    Science.gov (United States)

    Gordon, Jeffrey M.; Katz, Eugene A.; Tassew, Wondesen; Feuermann, Daniel

    2005-02-01

    We report the observation of a photovoltaic effect with pronounced hysteresis. The phenomenon derives from the sharp transition in the dominant mode of electron transport in the tunnel diodes that regulate multijunction solar cells, and is only observable at high flux. These results emerged from measurements of cell current-voltage characteristics performed with miniature fiber-optic solar concentrators that can deliver flux levels up to 10 000 times that of ambient sunlight in a highly localized fashion. The ramifications of our findings for photovoltaic design, diagnostics, and performance are addressed, and a nondestructive determination of the peak and valley threshold current densities of tunnel diodes is presented.

  8. Luminescent solar concentration with semiconductor nanorods and transfer-printed micro-silicon solar cells.

    Science.gov (United States)

    Bronstein, Noah D; Li, Lanfang; Xu, Lu; Yao, Yuan; Ferry, Vivian E; Alivisatos, A Paul; Nuzzo, Ralph G

    2014-01-28

    We utilize CdSe/CdS seeded nanorods as a tunable lumophore for luminescent concentration. Transfer-printed, ultrathin crystalline Si solar cells are embedded directly into the luminescent concentrator, allowing the study of luminescent concentrators with an area over 5000 times the area of the solar cell. By increasing the size of the CdS rod with respect to the luminescent CdSe seed, the reabsorption of propagating photons is dramatically reduced. At long luminescence propagation distances, this reduced reabsorption can overcome the diminished quantum yield inherent to the larger semiconductor structures, which is studied with lifetime spectroscopy. A Monte Carlo ray tracing model is developed to explain the performance of the luminescent concentrator and is then used as a design tool to determine the effect of luminescence trapping on the concentration of light using both CdSe/CdS nanorods and a model organic dye. We design an efficient luminescence trapping structure that should allow the luminescent concentrator based on CdSe/CdS nanorods to operate in the high-concentration regime.

  9. The ionic product of water in highly concentrated sodium perchlorate solutions.

    Science.gov (United States)

    Turonek, M L; Hefter, G T; May, P M

    1998-03-01

    The ionic product of water, pK(w)=-log[H(+)][OH(-)], has been determined in aqueous solutions of sodium perchlorate over the concentration range of 1.0-8.0 M at 25 degrees C from high-precision potentiometric titrations carried out in cells with liquid junction using both glass and hydrogen electrodes. The glass electrode results are systematically lower probably as a result of interference by Na(+) ions.

  10. Design and development of a high-concentration and high-efficiency photovoltaic concentrator using a curved Fresnel lens

    Energy Technology Data Exchange (ETDEWEB)

    Scharlack, R.S.; Moffat, A.

    1983-08-01

    Thermo Electron has designed a high concentration photovoltaic module that uses a domed, point-focus Fresnel lens. Their design, design optimization process, and results from lens and receiver tests are described in this report. A complete module has not been fabricated and probably will not be fabricated in the future; however, Thermo Electron's optical design, analysis, and testing of both secondary optical units and domed Fresnel lenses have made a significant contribution to our project. Tooling errors prevented the lens from reaching its potential efficiency by the end of the contract, and resolution of these tooling problems is currently being attempted with a follow-on contract, No. 68-9463.

  11. Enhanced Cycling Stability of Rechargeable Li-O2 Batteries Using High Concentration Electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Bin; Xu, Wu; Yan, Pengfei; Sun, Xiuliang; Bowden, Mark E.; Read, Jeffrey; Qian, Jiangfeng; Mei, Donghai; Wang, Chong M.; Zhang, Jiguang

    2016-01-26

    The electrolyte stability against reactive reduced-oxygen species is crucial for the development of rechargeable Li-O2 batteries. In this work, we systematically investigated the effect of lithium salt concentration in 1,2-dimethoxyethane (DME)-based electrolytes on the cycling stability of Li-O2 batteries. Cells with high concentration electrolyte illustrate largely enhanced cycling stability under both the full discharge/charge (2.0-4.5 V vs. Li/Li+) and the capacity limited (at 1,000 mAh g-1) conditions. These cells also exhibit much less reaction-residual on the charged air electrode surface, and much less corrosion to the Li metal anode. The density functional theory calculations are conducted on the molecular orbital energies of the electrolyte components and the Gibbs activation barriers for superoxide radical anion to attack DME solvent and Li+-(DME)n solvates. In a highly concentrated electrolyte, all DME molecules have been coordinated with salt and the C-H bond scission of a DME molecule becomes more difficult. Therefore, the decomposition of highly concentrated electrolyte in a Li-O2 battery can be mitigated and both air-cathodes and Li-metal anodes exhibits much better reversibility. As a results, the cyclability of Li-O2 can be largely improved.

  12. Chlorpromazine, haloperidol, metoclopramide and domperidone release prolactin through dopamine antagonism at low concentrations but paradoxically inhibit prolactin release at high concentrations.

    Science.gov (United States)

    Besser, G. M.; Delitala, G.; Grossman, A.; Stubbs, W. A.; Yeo, T.

    1980-01-01

    1. The effects of chlorpromazine, haloperidol, metoclopramide and domperidone on the release of prolactin from perfused columns of dispersed rat anterior pituitary cells were studied. 2. Chlorpromazine, haloperidol, metoclopramide and domperidone antagonized the dopamine-mediated inhibition of prolactin release at low concentrations. 3. Each dopamine antagonist displaced the dose-response curve for dopamine-induced suppression of prolactin release to the right in a parallel manner. 4. At higher concentrations, the four drugs became less effective as dopamine antagonists. 5. At high concentrations in the absence of dopamine, chlorpromazine, haloperidol, metoclopramide and domperidone paradoxically suppressed prolactin secretion by an unknown mechanism. PMID:6110459

  13. Solar concentrator modules with silicone-onglass Fresnel lens panels and multijunction cells.

    Science.gov (United States)

    Rumyantsev, Valery D

    2010-04-26

    High-efficiency multijunction (MJ) solar cells, being very expensive to manufacture, should only be used in combination with solar concentrators in terrestrial applications. An essential cost reduction of electric power produced by photovoltaic (PV) installations with MJ cells, may be expected by the creation of highly-effective, but inexpensive, elements for optical concentration and sun tracking. This article is an overview of the corresponding approach under development at the Ioffe Physical Technical Institute. The approach to R&D of the solar PV modules is based on the concepts of sunlight concentration by small-aperture area Fresnel lenses and "all-glass" module design. The small-aperture area lenses are arranged as a panel with silicone-on-glass structure where the glass plate serves as the front surface of a module. In turn, high-efficiency InGaP/(In)GaAs/Ge cells are arranged on a rear module panel mounted on a glass plate which functions as a heat sink and integrated protective cover for the cells. The developed PV modules and sun trackers are characterized by simple design, and are regarded as the prototypes for further commercialization.

  14. Solar concentrator modules with silicone-on-glass Fresnel lens panels and multijunction cells.

    Science.gov (United States)

    Rumyantsev, Valery D

    2010-04-26

    High-efficiency multijunction (MJ) solar cells, being very expensive to manufacture, should only be used in combination with solar concentrators in terrestrial applications. An essential cost reduction of electric power produced by photovoltaic (PV) installations with MJ cells, may be expected by the creation of highly-effective, but inexpensive, elements for optical concentration and sun tracking. This article is an overview of the corresponding approach under development at the Ioffe Physical Technical Institute. The approach to R&D of the solar PV modules is based on the concepts of sunlight concentration by small-aperture area Fresnel lenses and "all-glass" module design. The small-aperture area lenses are arranged as a panel with silicone-on-glass structure where the glass plate serves as the front surface of a module. In turn, high-efficiency InGaP/(In)GaAs/Ge cells are arranged on a rear module panel mounted on a glass plate which functions as a heat sink and integrated protective cover for the cells. The developed PV modules and sun trackers are characterized by simple design, and are regarded as the prototypes for further commercialization.

  15. Investigation of Cu2ZnSnS4 thin-film solar cells with carrier concentration gradient

    Science.gov (United States)

    Xu, Jiaxiong

    2016-11-01

    To investigate the effect of carrier concentration gradient on Cu2ZnSnS4 (CZTS) thin-film solar cells, the properties of CZTS solar cells were studied by numerical method. The photovoltaic performances of carrier concentration gradient CZTS solar cells were calculated by the solutions of Poisson's equation, continuity equation, and current density equation using AFors-Het v2.4 program. The carrier concentration gradient was changed to analyze its effect. Compared with CZTS solar cells without carrier concentration gradient, the photovoltaic performances of CZTS solar cells can be enhanced by using carrier concentration gradient absorber. The carrier concentration gradient can extend the distribution region of built-in electric field, which is beneficial to the drift of photo-generated carriers. However, the carrier concentration gradient also affects the recombination and series resistances of solar cells. When the defect density of CZTS layer is high, the photo-generated carriers are affected significantly by recombination, resulting in slight effect of carrier concentration gradient. Therefore, the defect density should be reduced to enhance the effect of carrier concentration gradient on improving conversion efficiency of CZTS thin-film solar cells.

  16. HIGH TEMPERATURE POLYMER FUEL CELLS

    DEFF Research Database (Denmark)

    Jensen, Jens Oluf; Qingfeng, Li; He, Ronghuan

    2003-01-01

    This paper will report recent results from our group on polymer fuel cells (PEMFC) based on the temperature resistant polymer polybenzimidazole (PBI), which allow working temperatures up to 200°C. The membrane has a water drag number near zero and need no water management at all. The high working...

  17. High-concentration zeta potential measurements using light-scattering techniques.

    Science.gov (United States)

    Kaszuba, Michael; Corbett, Jason; Watson, Fraser Mcneil; Jones, Andrew

    2010-09-28

    Zeta potential is the key parameter that controls electrostatic interactions in particle dispersions. Laser Doppler electrophoresis is an accepted method for the measurement of particle electrophoretic mobility and hence zeta potential of dispersions of colloidal size materials. Traditionally, samples measured by this technique have to be optically transparent. Therefore, depending upon the size and optical properties of the particles, many samples will be too concentrated and will require dilution. The ability to measure samples at or close to their neat concentration would be desirable as it would minimize any changes in the zeta potential of the sample owing to dilution. However, the ability to measure turbid samples using light-scattering techniques presents a number of challenges. This paper discusses electrophoretic mobility measurements made on turbid samples at high concentration using a novel cell with reduced path length. Results are presented on two different sample types, titanium dioxide and a polyurethane dispersion, as a function of sample concentration. For both of the sample types studied, the electrophoretic mobility results show a gradual decrease as the sample concentration increases and the possible reasons for these observations are discussed. Further, a comparison of the data against theoretical models is presented and discussed. Conclusions and recommendations are made from the zeta potential values obtained at high concentrations.

  18. High Concentration of Red Clay as an Alternative for Antibiotics in Aquaculture.

    Science.gov (United States)

    Jung, Jaejoon; Jee, Seung Cheol; Sung, Jung-Suk; Park, Woojun

    2016-01-01

    The use of antibiotics in aquaculture raises environmental and food safety concerns because chronic exposure of an aquatic ecosystem to antibiotics can result in the spread of antibiotic resistance, bioaccumulation of antibiotics in the organisms, and transfer of antibiotics to humans. In an attempt to overcome these problems, high-concentration red clay was applied as an alternative antibiotic against the following common fish pathogens: Aeromonas salmonicida, Vibrio alginolyticus, and Streptococcus equinus. The growth of A. salmonicida and V. alginolyticus was retarded by red clay, whereas that of S. equinus was promoted. Phase contrast and scanning electron microscopy analyses confirmed the attachment of red clay on cell surfaces, resulting in rapid gravitational removal and cell surface damage in both A. salmonicida and V. alginolyticus, but not in S. equinus. Different cell wall properties of grampositive species may explain the unharmed cell surface of S. equinus. Significant levels of oxidative stress were generated in only the former two species, whereas significant changes in membrane permeability were found only in S. equinus, probably because of its physiological adaptation. The bacterial communities in water samples from Oncorhynchus mykiss aquacultures supplemented with red clay showed similar structure and diversity as those from oxytetracycline-treated water. Taken together, the antibiotic effects of high concentrations of red clay in aquaculture can be attributed to gravitational removal, cell surface damage, and oxidative stress production, and suggest that red clay may be used as an alternative for antibiotics in aquaculture.

  19. Recombinant human thrombopoietin in combination with granulocyte colony-stimulating factor enhances mobilization of peripheral blood progenitor cells, increases peripheral blood platelet concentration, and accelerates hematopoietic recovery following high-dose chemotherapy.

    Science.gov (United States)

    Somlo, G; Sniecinski, I; ter Veer, A; Longmate, J; Knutson, G; Vuk-Pavlovic, S; Bhatia, R; Chow, W; Leong, L; Morgan, R; Margolin, K; Raschko, J; Shibata, S; Tetef, M; Yen, Y; Forman, S; Jones, D; Ashby, M; Fyfe, G; Hellmann, S; Doroshow, J H

    1999-05-01

    Lineage-specific growth factors mobilize peripheral blood progenitor cells (PBPC) and accelerate hematopoietic recovery after high-dose chemotherapy. Recombinant human thrombopoietin (rhTPO) may further increase the progenitor-cell content and regenerating potential of PBPC products. We evaluated the safety and activity of rhTPO as a PBPC mobilizer in combination with granulocyte colony-stimulating factor (G-CSF) in 29 breast cancer patients treated with high-dose chemotherapy followed by PBPC reinfusion. Initially, patients received escalating single doses of rhTPO intravenously (IV) at 0.6, 1.2, or 2.4 micrograms/kg, on day 1. Subsequent patients received rhTPO 0.6 or 0.3 micrograms/kg on days -3, -1, and 1, or 0.6 micrograms/kg on days -1 and 1. G-CSF, 5 micrograms/kg IV or subcutaneously (SC) twice daily, was started on day 3 and continued through aphereses. Twenty comparable, concurrently and identically treated patients (who were eligible and would have been treated on protocol but for the lack of study opening) mobilized with G-CSF alone served as comparisons. CD34(+) cell yields were substantially higher with the first apheresis following rhTPO and G-CSF versus G-CSF alone: 4.1 x 10(6)/kg (range, 1.3 to 17.6) versus 0.8 x 10(6)/ kg (range, 0.3 to 4.2), P =.0003. The targeted minimum yield of 3 x 10(6) CD34(+) cells/kg was procured following a single apheresis procedure in 61% of the rhTPO and G-CSF-mobilized group versus 10% of G-CSF-mobilized patients (P =.001). In rhTPO and G-CSF mobilized patients, granulocyte (day 8 v 9, P =.0001) and platelet recovery (day 9 v 10, P =.07) were accelerated, and fewer erythrocyte (3 v 4, P =.02) and platelet (4 v 5, P =.02) transfusions were needed compared with G-CSF-mobilized patients. Peripheral blood platelet counts, following rhTPO and G-CSF, were increased by greater than 100% and the platelet content of PBPC products by 60% to 110% on the first and second days of aphereses (P rhTPO at 0.6 microgram/kg. rhTPO is

  20. An Automatic High Efficient Method for Dish Concentrator Alignment

    OpenAIRE

    Yong Wang; Song Li; Jinshan Xu; Yijiang Wang; Xu Cheng; Changgui Gu; Shengyong Chen; Bin Wan

    2014-01-01

    Alignment of dish concentrator is a key factor to the performance of solar energy system. We propose a new method for the alignment of faceted solar dish concentrator. The isosceles triangle configuration of facet’s footholds determines a fixed relation between light spot displacements and foothold movements, which allows an automatic determination of the amount of adjustments. Tests on a 25 kW Stirling Energy System dish concentrator verify the feasibility, accuracy, and efficiency of our...

  1. Experimental measurements of a prototype high concentration Fresnel lens CPV module for the harvesting of diffuse solar radiation.

    Science.gov (United States)

    Yamada, Noboru; Okamoto, Kazuya

    2014-01-13

    A prototype concentrator photovoltaic (CPV) module with high solar concentration, an added low-cost solar cell, and an adjoining multi-junction solar cell is fabricated and experimentally demonstrated. In the present CPV module, the low cost solar cell captures diffuse solar radiation penetrating the concentrator lens and the multi-junction cell captures concentrated direct solar radiation. On-sun test results show that the electricity generated by a Fresnel lens-based CPV module with an additional crystalline silicon solar cell is greater than that for a conventional CPV module by a factor of 1.44 when the mean ratio of diffuse normal irradiation to global normal irradiation at the module aperture is 0.4. Several fundamental optical characteristics are presented for the present module.

  2. Selection of common bean lines with high grain yield and high grain calcium and iron concentrations

    Directory of Open Access Journals (Sweden)

    Nerinéia Dalfollo Ribeiro

    2014-02-01

    Full Text Available Genetic improvement of common bean nutritional quality has advantages in marketing and can contribute to society as a food source. The objective of this study was to evaluate the genetic variability for grain yield, calcium and iron concentrations in grains of inbred common bean lines obtained by different breeding methods. For this, 136 F7 inbred lines were obtained using the Pedigree method and 136 F7 inbred lines were obtained using the Single-Seed Descent (SSD method. The lines showed genetic variability for grain yield, and concentrations of calcium and iron independently of the method of advancing segregating populations. The Pedigree method allows obtaining a greater number of lines with high grain yield. Selection using the SSD method allows the identification of a larger number of lines with high concentrations of calcium and iron in grains. Weak negative correlations were found between grain yield and calcium concentration (r = -0.0994 and grain yield and iron concentration (r = -0.3926. Several lines show genetic superiority for grain yield and concentrations of calcium and iron in grains and their selection can result in new common bean cultivars with high nutritional quality.

  3. Purifying, Separating, and Concentrating Cells From a Sample Low in Biomass

    Science.gov (United States)

    Benardini, James N.; LaDuc, Myron T.; Diamond, Rochelle

    2012-01-01

    Frequently there is an inability to process and analyze samples of low biomass due to limiting amounts of relevant biomaterial in the sample. Furthermore, molecular biological protocols geared towards increasing the density of recovered cells and biomolecules of interest, by their very nature, also concentrate unwanted inhibitory humic acids and other particulates that have an adversarial effect on downstream analysis. A novel and robust fluorescence-activated cell-sorting (FACS)-based technology has been developed for purifying (removing cells from sampling matrices), separating (based on size, density, morphology), and concentrating cells (spores, prokaryotic, eukaryotic) from a sample low in biomass. The technology capitalizes on fluorescent cell-sorting technologies to purify and concentrate bacterial cells from a low-biomass, high-volume sample. Over the past decade, cell-sorting detection systems have undergone enhancements and increased sensitivity, making bacterial cell sorting a feasible concept. Although there are many unknown limitations with regard to the applicability of this technology to environmental samples (smaller cells, few cells, mixed populations), dogmatic principles support the theoretical effectiveness of this technique upon thorough testing and proper optimization. Furthermore, the pilot study from which this report is based proved effective and demonstrated this technology capable of sorting and concentrating bacterial endospore and bacterial cells of varying size and morphology. Two commercial off-the-shelf bacterial counting kits were used to optimize a bacterial stain/dye FACS protocol. A LIVE/DEAD BacLight Viability and Counting Kit was used to distinguish between the live and dead cells. A Bacterial Counting Kit comprising SYTO BC (mixture of SYTO dyes) was employed as a broad-spectrum bacterial counting agent. Optimization using epifluorescence microscopy was performed with these two dye/stains. This refined protocol was further

  4. Harvesting Energy from Salinity Differences Using Battery Electrodes in a Concentration Flow Cell.

    Science.gov (United States)

    Kim, Taeyoung; Rahimi, Mohammad; Logan, Bruce E; Gorski, Christopher A

    2016-09-06

    Salinity-gradient energy (SGE) technologies produce carbon-neutral and renewable electricity from salinity differences between seawater and freshwater. Capacitive mixing (CapMix) is a promising class of SGE technologies that captures energy using capacitive or battery electrodes, but CapMix devices have produced relatively low power densities and often require expensive materials. Here, we combined existing CapMix approaches to develop a concentration flow cell that can overcome these limitations. In this system, two identical battery (i.e., faradaic) electrodes composed of copper hexacyanoferrate (CuHCF) were simultaneously exposed to either high (0.513 M) or low (0.017 M) concentration NaCl solutions in channels separated by a filtration membrane. The average power density produced was 411 ± 14 mW m(-2) (normalized to membrane area), which was twice as high as previously reported values for CapMix devices. Power production was continuous (i.e., it did not require a charging period and did not vary during each step of a cycle) and was stable for 20 cycles of switching the solutions in each channel. The concentration flow cell only used inexpensive materials and did not require ion-selective membranes or precious metals. The results demonstrate that the concentration flow cell is a promising approach for efficiently harvesting energy from salinity differences.

  5. EFFECTS OF PDGF-BB ON INTRACELLULAR CALCIUM CONCENTRATION AND PROLIFERATION IN CULTURED GLOMERULAR MESANGIAL CELLS

    Institute of Scientific and Technical Information of China (English)

    WEN Li-ping; ZHANG Chong; BIAN Fan; ZOU Jun; JIANG Geng-ru; ZHU Han-wei

    2006-01-01

    Objective To investigate the relationship between the alteration of intracellular calcium concentration and proliferation in cultured glomerular mesangial cells. Methods Rat mesangial cells were cultured.Intracellular calcium concentrations were measured by confocal Laser Scanning Microscopy and Fura-3 fluorescence dyeing techniques. Cell growth was measured by MTT assay. Results PDGF-BB increased intracellular calcium concentrations in a dose-dependent manner, and at the same time promote the proliferation of mesangial cells. After preincubation with calcium channel blocker nifedipine or angiotensin converting enzyme inhibitor captopril, both the increase of intracellular calcium concentrations and cell proliferations induced by PDGF-BB were inhibited. Tripterigium Wilfordii Glycosides (TMG) significantly inhibited the mesangial cell proliferations, but it had no significant effect on intracellular calcium concentrations. Conclusion There was a positive relationship between the elevation of intracellular calcium concentration and cell proliferation in glomerular mesangial cells, but the increase of in- tracellular calcium concentrations wasn't the only way for proliferation.

  6. An Automatic High Efficient Method for Dish Concentrator Alignment

    Directory of Open Access Journals (Sweden)

    Yong Wang

    2014-01-01

    for the alignment of faceted solar dish concentrator. The isosceles triangle configuration of facet’s footholds determines a fixed relation between light spot displacements and foothold movements, which allows an automatic determination of the amount of adjustments. Tests on a 25 kW Stirling Energy System dish concentrator verify the feasibility, accuracy, and efficiency of our method.

  7. Continuous Ethanol Production with a Membrane Bioreactor at High Acetic Acid Concentrations

    Directory of Open Access Journals (Sweden)

    Päivi Ylitervo

    2014-07-01

    Full Text Available The release of inhibitory concentrations of acetic acid from lignocellulosic raw materials during hydrolysis is one of the main concerns for 2nd generation ethanol production. The undissociated form of acetic acid can enter the cell by diffusion through the plasma membrane and trigger several toxic effects, such as uncoupling and lowered intracellular pH. The effect of acetic acid on the ethanol production was investigated in continuous cultivations by adding medium containing 2.5 to 20.0 g·L−1 acetic acid at pH 5.0, at a dilution rate of 0.5 h−1. The cultivations were performed at both high (~25 g·L−1 and very high (100–200 g·L−1 yeast concentration by retaining the yeast cells inside the reactor by a cross-flow membrane in a membrane bioreactor. The yeast was able to steadily produce ethanol from 25 g·L−1 sucrose, at volumetric rates of 5–6 g·L−1·h−1 at acetic acid concentrations up to 15.0 g·L−1. However, the yeast continued to produce ethanol also at a concentration of 20 g·L−1 acetic acid but at a declining rate. The study thereby demonstrates the great potential of the membrane bioreactor for improving the robustness of the ethanol production based on lignocellulosic raw materials.

  8. Starch source in high concentrate rations does not affect rumen pH, histamine and lipopolysaccharide concentrations in dairy cows

    NARCIS (Netherlands)

    Pilachai, R.; Schonewille, J.T.; Thamrongyoswittayakul, C.; Aiumlamai, S.; Wachirapakom, C.; Everts, H.; Hendriks, W.H.

    2012-01-01

    The replacement of ground corn by cassava meal on rumen pH, lipopolysaccharide (LPS) and histamine concentrations under typical Thai feeding conditions (high concentrate diets and rice straw as the sole source of roughage) was investigated. Four rumen-fistulated crossbred Holstein, non-pregnant, dry

  9. Performance analysis of solar cell arrays in concentrating light intensity

    Institute of Scientific and Technical Information of China (English)

    Xu Yongfeng; Li Ming; Wang Liuling; Lin Wenxian; Xiang Ming; Zhang Xinghua; Wang Yunfeng; Wei Shengxian

    2009-01-01

    tage in concentrating light intensity. The output power has a -20 W/V coefficient and so cooling fluid must be used. Both heat energy and electrical power are then obtained with a solar trough concentrating photovoltaic/thermal system.

  10. Photovoltaics. III - Concentrators

    Science.gov (United States)

    Backus, C. E.

    1980-02-01

    Photovoltaic concentration systems that redirect sunlight falling on a surface to a smaller solar-cell surface concentrating the intensity of sunlight many times are examined. It is noted that solar cells for concentrating systems must be designed for low internal resistance as well as for high sunlight intensities. Two designs of silicon cells are presented that perform well at high concentrations; these are interdigitated back-contact cells and vertical multijunction cells. Attention is given to heat tapping of reemitted light.

  11. LPWCO method for the treatment of high concentrated organic wastewater

    Institute of Scientific and Technical Information of China (English)

    1998-01-01

    Based on wet air oxidation (WAO) and Fenton reagent, thispaper raises a new low pressure wet catalytic oxidation(LPWCO)which requires low pressure for the treatment of highlyconcentrated and refractory organic wastewater. Compared withgeneral wet air oxidation, the pressure of the treatment(0.1-0.6MPa) is only one of tens to percentage of latter(3.5-10MPa). Inaddition, its temperature is no more than 180℃.Compared withFenton reagent, while H2O2/COD(weight ratio) less than 1.2, theremoval of COD in the treatment is over twenty percents more thanFenton's even the value of COD is more than 14000mg/L. In thispaper, we study the effect factor of COD removal and the mechanismof this treatment. The existence of synergistic effect (catalytic oxidation and carbonization) for COD removal in H2SO4-Fenton reagent system under the condition of applied pressure and heating (0.1-0.6MPa, 104-165℃) was verified. The best condition of this disposal are as follows:H2O2/COD(weight ratio)=0.2-1.0, Fe2+ 0.6×10-3 mol, H2SO4 0.5mol, COD>1×104mg/L, the operating pressure is 0.1-0.6MPa and temperature is 104-165℃. This method suit to dispose the high-concentrated refractory wastewater, especially to the wastewater containing H2SO produced in the manufacture of pesticide, dyestuff and petrochemical works.

  12. Leptin inhibits proliferation of breast cancer cells at supraphysiological concentrations by inhibiting mitogen-activated protein kinase signaling.

    Science.gov (United States)

    Weichhaus, Michael; Broom, John; Wahle, Klaus; Bermano, Giovanna

    2014-07-01

    Leptin is a hormone secreted by white fat tissue and signals the amount of overall body fat to the hypothalamus. The circulating concentration of leptin correlates with the level of obesity. Breast cancer risk is higher in obese postmenopausal women compared with postmenopausal women of a normal weight, and high leptin concentrations may contribute to this risk. In the present study, SK-BR-3 and MDA-MB-231 breast cancer cell lines were treated with various concentrations (6.25-1,600 ng/ml) of recombinant leptin and changes in cell proliferation were assessed. The SK-BR-3 breast cancer cells exhibited a concentration-dependent increase in proliferation with physiological leptin concentrations (100 ng/ml) was observed. Cell proliferation was not affected at supraphysiological leptin concentrations (>800 ng/ml) in SK-BR-3 cells, whereas it decreased in MDA-MB-231 cells. Therefore, cell signaling and cell cycle changes were assessed at supraphysiological concentrations (1,600 ng/ml). In the two cell lines, leptin treatment decreased the mitogen-activated protein kinase (MAPK) cell signaling pathway activation. Leptin treatment did not increase Akt phosphorylation or significantly alter the cell population distribution across cell cycle stages. To the best of our knowledge, leptin-induced growth inhibition of breast cancer cells at supraphysiological concentrations has not been reported in the literature to date, and the findings of this study suggest that reduced MAPK activity may be the underlying cause. Thus, the effect of leptin on breast cancer growth warrants further investigation since leptin is considered to be one of the main mediators in the obesity-breast cancer connection.

  13. High Oxygen Concentrations Adversely Affect the Performance of Pulmonary Surfactant.

    Science.gov (United States)

    Smallwood, Craig D; Boloori-Zadeh, Parnian; Silva, Maricris R; Gouldstone, Andrew

    2017-08-01

    Although effective in the neonatal population, exogenous pulmonary surfactant has not demonstrated a benefit in pediatric and adult subjects with hypoxic lung injury despite a sound physiologic rationale. Importantly, neonatal surfactant replacement therapy is administered in conjunction with low fractional FIO2 while pediatric/adult therapy is administered with high FIO2 . We suspected a connection between FIO2 and surfactant performance. Therefore, we sought to assess a possible mechanism by which the activity of pulmonary surfactant is adversely affected by direct oxygen exposure in in vitro experiments. The mechanical performance of pulmonary surfactant was evaluated using 2 methods. First, Langmuir-Wilhelmy balance was utilized to study the reduction in surface area (δA) of surfactant to achieve a low bound value of surface tension after repeated compression and expansion cycles. Second, dynamic light scattering was utilized to measure the size of pulmonary surfactant particles in aqueous suspension. For both experiments, comparisons were made between surfactant exposed to 21% and 100% oxygen. The δA of surfactant was 21.1 ± 2.0% and 35.8 ± 2.0% during exposure to 21% and 100% oxygen, respectively (P = .02). Furthermore, dynamic light-scattering experiments revealed a micelle diameter of 336.0 ± 12.5 μm and 280.2 ± 11.0 μm in 21% and 100% oxygen, respectively (P < .001), corresponding to a ∼16% decrease in micelle diameter following exposure to 100% oxygen. The characteristics of pulmonary surfactant were adversely affected by short-term exposure to oxygen. Specifically, surface tension studies revealed that short-term exposure of surfactant film to high concentrations of oxygen expedited the frangibility of pulmonary surfactant, as shown with the δA. This suggests that reductions in pulmonary compliance and associated adverse effects could begin to take effect in a very short period of time. If these findings can be demonstrated in vivo, a role for

  14. Highly Concentrated Alginate-Gellan Gum Composites for 3D Plotting of Complex Tissue Engineering Scaffolds

    Directory of Open Access Journals (Sweden)

    Ashwini Rahul Akkineni

    2016-04-01

    Full Text Available In tissue engineering, additive manufacturing (AM technologies have brought considerable progress as they allow the fabrication of three-dimensional (3D structures with defined architecture. 3D plotting is a versatile, extrusion-based AM technology suitable for processing a wide range of biomaterials including hydrogels. In this study, composites of highly concentrated alginate and gellan gum were prepared in order to combine the excellent printing properties of alginate with the favorable gelling characteristics of gellan gum. Mixtures of 16.7 wt % alginate and 2 or 3 wt % gellan gum were found applicable for 3D plotting. Characterization of the resulting composite scaffolds revealed an increased stiffness in the wet state (15%–20% higher Young’s modulus and significantly lower volume swelling in cell culture medium compared to pure alginate scaffolds (~10% vs. ~23%. Cytocompatibility experiments with human mesenchymal stem cells (hMSC revealed that cell attachment was improved—the seeding efficiency was ~2.5–3.5 times higher on the composites than on pure alginate. Additionally, the composites were shown to support hMSC proliferation and early osteogenic differentiation. In conclusion, print fidelity of highly concentrated alginate-gellan gum composites was comparable to those of pure alginate; after plotting and crosslinking, the scaffolds possessed improved qualities regarding shape fidelity, mechanical strength, and initial cell attachment making them attractive for tissue engineering applications.

  15. The effects of exposure time and fluorine concentration on cell homeostasis

    Directory of Open Access Journals (Sweden)

    Ewa Kurzeja

    2015-09-01

    Full Text Available ummary Introduction. The fluorine content in food depends on the presence of its compounds in water, soil and air. Owing to the high activity of the fluoride ion and its significant affinity to divalent metals, which are co-factors of many enzymes, changes in the activity of these enzymes may take place, resulting, among other things, in ATP concentration changes and free radical generation. The aim of this work was to assess the effects of length of exposure and fluorine concentration on culture growth, fibroblast energy homeostasis and the production of nitric oxide. Material and methods. The research was conducted on fibroblasts isolated by means of mouse skin tissue explants from the tail and abdomen, BALB/c strain. The culture was bred with added sodium fluoride of final concentration of: 0.03 mmol/l; 0.06 mmol/l and 0.12 mmol/l. The culture growth time was: 1, 3 and 6 days. The culture growth indicator (N/N0 was determined, as well as the ATP concentration and the amount of nitric oxide(II released into the medium. The results obtained were calculated for 12106 cells. Results. The highest values of the growth indicator, ATP concentration and nitric oxide were found in control cultures. The results obtained suggest that the presence of fluoride ions inhibits fibroblast culture growth, decreases ATP synthesis and lowers nitric oxide(II production. The changes depend on the concentration of fluoride and the time of cell culture cultivation. Conclusions. Long-term exposure even to low fluoride concentrations disturbs cell homeostasis.

  16. Intracellular ion concentrations and cell volume during cholinergic stimulation of eccrine secretory coil cells

    Energy Technology Data Exchange (ETDEWEB)

    Takemura, T.; Sato, F.; Saga, K.; Suzuki, Y.; Sato, K. (Univ. of Iowa College of Medicine, Iowa City (USA))

    1991-02-01

    Methacholine (MCh)-induced changes in intracellular concentrations of Na, K, and Cl (( Na)i, (K)i, and (Cl)i, respectively) and in cellular dry mass (a measure of cell shrinkage) were examined in isolated monkey eccrine sweat secretory coils by electron probe X-ray microanalysis using the peripheral standard method. To further confirm the occurrence of cell shrinkage during MCh stimulation, the change in cell volume of dissociated clear and dark cells were directly determined under a light microscope equipped with differential interference contrast (DIC) optics. X-ray microanalysis revealed a biphasic increase in cellular dry mass in clear cells during continuous MCh stimulation; an initial increase of dry mass to 158% (of control) followed by a plateau at 140%, which correspond to the decrease in cell volume of 37 and 29%, respectively. The latter agrees with the MCh-induced cell shrinkage of 29% in dissociated clear cells. The MCh-induced increase in dry mass in myoepithelial cells was less than half that of clear cells. During the steady state of MCh stimulation, both (K+)i and (Cl)i of clear cells decreased by about 45%, whereas (Na)i increased in such a way to maintain the sum of (Na) i + (K)i constant. There was a small (12-15 mM) increase in (Na)i and a decrease in (K)i in myoepithelial cells during stimulation with MCh. Dissociated dark cells failed to significantly shrink during MCh stimulation. The decrease in (Cl)i in the face of constant (Na)i + (K)i suggests the accumulation of unknown anion(s) inside the clear cell during MCh stimulation.

  17. Dish-based high concentration PV system with Köhler optics.

    Science.gov (United States)

    Coughenour, Blake M; Stalcup, Thomas; Wheelwright, Brian; Geary, Andrew; Hammer, Kimberly; Angel, Roger

    2014-03-10

    We present work at the Steward Observatory Solar Lab on a high concentration photovoltaic system in which sunlight focused by a single large paraboloidal mirror powers many small triple-junction cells. The optical system is of the XRX-Köhler type, comprising the primary reflector (X) and a ball lens (R) at the focus that reimages the primary reflector onto an array of small reflectors (X) that apportion the light to the cells. We present a design methodology that provides generous tolerance to mis-pointing, uniform illumination across individual cells, minimal optical loss and even distribution between cells, for efficient series connection. An operational prototype has been constructed with a 3.3m x 3.3m square primary reflector of 2m focal length powering 36 actively cooled triple-junction cells at 1200x concentration (geometric). The measured end-to-end system conversion efficiency is 28%, including the parasitic loss of the active cooling system. Efficiency ~32% is projected for the next system.

  18. Double red cell concentrates -in vitro quality after delayed refrigeration.

    Science.gov (United States)

    Thomas, S; Bekoe, Y; Uddin, S; Beard, M; Cardigan, R

    2010-10-01

    Automated collection of red cell concentrates (RCC) presents a number of potential advantages to donors, blood services and recipients, and allows the collection of finished components from sites that are remote from a blood centre. However, data are lacking on how long the collected RCC may be stored at ambient temperature prior to their final storage at 4 °C. In this study, the Haemonetics Cymbal device was used to collect RCC using citrate, phosphate and dextrose (CPD-50) anticoagulant. A total of 10 procedures each yielded two leucodepleted RCC in saline, adenine, glucose and mannitol (SAGM) additive solution. One of each pair of RCC was kept warm in an insulated transport bag for 8 h and the other for 6 h. In vitro assessments of the quality of the RCC were made during subsequent 42-day storage of the RCC at 2-6 °C, and compared with reference data. All collected RCC were within UK and European limits for volume, haematocrit and haemoglobin content. Haemolysis was within specification at Day 42 and was no different in RCC held warm for 6 or 8 hours, but tended to be higher than reference data from whole blood derived RCC. ATP, 2,3 DPG and supernatant potassium levels were all similar in RCC held warm for 6 or 8 hours and reference data. We conclude that the Cymbal device may be used to collect two RCC in SAGM, and the in vitro assessment indicates that RCC may be stored without refrigeration for up to 8 h following collection, prior to final storage at 4 °C.

  19. Serum concentrations of mast cell tryptase are reduced in heavy drinkers

    DEFF Research Database (Denmark)

    Beceiro, Carmen; Campos, Joaquín; Valcarcel, Maria-Angeles;

    2015-01-01

    BACKGROUND: Baseline serum tryptase concentrations are commonly used in clinical practice as a marker of the body's mast cell burden. This study aimed to investigate serum tryptase concentrations in heavy drinkers. METHODS: Serum tryptase concentrations were determined in 126 heavy drinkers (75...... test positivity) was not associated with serum tryptase concentrations in heavy drinkers. CONCLUSIONS: Serum concentrations of mast cell tryptase are lower in heavy drinkers than in healthy controls....

  20. Optimized III-V Multijunction Concentrator Solar Cells on Patterned Si and Ge Substrates: Final Technical Report, 15 September 2004--30 September 2006

    Energy Technology Data Exchange (ETDEWEB)

    Ringel, S. A.

    2008-11-01

    Goal is to demo realistic path to III-V multijunction concentrator efficiencies > 40% by substrate-engineering combining compositional grading with patterned epitaxy for small-area cells for high concentration.

  1. Spatial concentration distribution analysis of cells in electrode-multilayered microchannel by dielectric property measurement.

    Science.gov (United States)

    Yao, Jiafeng; Kodera, Tatsuya; Obara, Hiromichi; Sugawara, Michiko; Takei, Masahiro

    2015-07-01

    The spatial concentration distribution of cells in a microchannel is measured by combining the dielectric properties of cells with the specific structure of the electrode-multilayered microchannel. The dielectric properties of cells obtained with the impedance spectroscopy method includes the cell permittivity and dielectric relaxation, which corresponds to the cell concentration and structure. The electrode-multilayered microchannel is constructed by 5 cross-sections, and each cross-section contains 5 electrode-layers embedded with 16 micro electrodes. In the experiment, the dielectric properties of cell suspensions with different volume concentrations are measured with different electrode-combinations corresponding to different electric field distributions. The dielectric relaxations of different cell concentrations are compared and discussed with the Maxwell-Wagner dispersion theory, and the relaxation frequencies are analysed by a cell polarization model established based on the Hanai cell model. Moreover, a significant linear relationship with AC frequency dependency between relative permittivity and cell concentration was found, which provides a promising way to on-line estimate cell concentration in microchannel. Finally, cell distribution in 1 cross-section of the microchannel (X and Y directions) was measured with different electrode-combinations using the dielectric properties of cell suspensions, and cell concentration distribution along the microchannel (Z direction) was visualized at flowing state. The present cell spatial sensing study provides a new approach for 3 dimensional non-invasive online cell sensing for biological industry.

  2. Aggregation of normal and sickle hemoglobin in high concentration phosphate buffer.

    Science.gov (United States)

    Chen, Kejing; Ballas, Samir K; Hantgan, Roy R; Kim-Shapiro, Daniel B

    2004-12-01

    Sickle cell disease is caused by a mutant form of hemoglobin, hemoglobin S, that polymerizes under hypoxic conditions. The extent and mechanism of polymerization are thus the subject of many studies of the pathophysiology of the disease and potential treatment strategies. To facilitate such studies, a model system using high concentration phosphate buffer (1.5 M-1.8 M) has been developed. To properly interpret results from studies using this model it is important to understand the similarities and differences in hemoglobin S polymerization in the model compared to polymerization under physiological conditions. In this article, we show that hemoglobin S and normal adult hemoglobin, hemoglobin A, aggregate in high concentration phosphate buffer even when the concentration of hemoglobin is below the solubility defined for polymerization. This phenomenon was not observed using 0.05 M phosphate buffer or in another model system we studied that uses dextran to enhance polymerization. We have used static light scattering, dynamic light scattering, and differential interference contrast microscopy to confirm aggregation of deoxygenated and oxygenated hemoglobins below their solubility and have shown that this aggregation is not observable using turbidity measurements, a common technique for assessing polymerization. We have also shown that the aggregation increases with increasing temperature in the range of 15 degrees -37 degrees C and that it increases as the concentration of phosphate increases. These studies contribute to the working knowledge of how to properly apply studies of hemoglobin S polymerization that are conducted using the high phosphate model.

  3. High concentrations of H2O2 make aerobic glycolysis energetically more favourable than cellular respiration.

    Directory of Open Access Journals (Sweden)

    Hamid R Molavian

    2016-08-01

    Full Text Available Since the original observation of the Warburg Effect in cancer cells, over eight decades ago, the major question of why aerobic glycolysis is favored over oxidative phosphorylation has remained unresolved. An understanding of this phenomenon may well be the key to the development of more effective cancer therapies. In this paper, we use a semi-empirical method to throw light on this puzzle. We show that aerobic glycolysis is in fact energetically more favorable than oxidative phosphorylation for concentrations of peroxide (H2O2 above some critical threshold value. The fundamental reason for this is the activation and high engagement of the pentose phosphate pathway (PPP in response to the production of reactive oxygen species H2O2 by mitochondria and the high concentration of H2O2 (produced by mitochondria and other sources. This makes oxidative phosphorylation an inefficient source of energy since it leads (despite high levels of ATP production to a concomitant high energy consumption in order to respond to the hazardous waste products resulting from cellular processes associated with this metabolic pathway. We also demonstrate that the high concentration of H2O2 results in an increased glucose consumption, and also increases the lactate production in the case of glycolysis.

  4. Highly Sensitive Cadmium Concentration Sensor Using Long Period Grating

    Directory of Open Access Journals (Sweden)

    A. S. Lalasangi

    2011-08-01

    Full Text Available In this paper we have proposed a simple and effective Long Period Grating chemical sensor for detecting the traces of Cadmium (Cd++ in drinking water at ppm level. Long Period gratings (LPG were fabricated by point-by-point technique with CO2 laser. We have characterized the LPG concentration sensor sensitivity for different solutions of Cd concentrations varying from 0.01 ppm to 0.04 ppm by injecting white Light source and observed transmitted spectra using Optical Spectrum Analyzer (OSA. Proper reagents have been used in the solutions for detection of the Cd species. The overall shift in wavelength is 10 nm when surrounding medium gradually changed from water to 0.04 ppm of cadmium concentrations. A comparative study has been done using sophisticated spectroscopic atomic absorption spectrometer (AAS and Inductively Coupled Plasma (ICP instruments. The spectral sensitivity enhancement was done by modifying grating surface with gold nanoparticles.

  5. Enhanced Efficiencies for High-Concentration, Multijunction PV Systems by Optimizing Grid Spacing under Nonuniform Illumination

    Directory of Open Access Journals (Sweden)

    Pratibha Sharma

    2014-01-01

    Full Text Available The design of a triple junction solar cell’s front contact grid can significantly affect cell conversion efficiency under high concentration. We consider one aspect of grid design, choosing a linear grid within a distributed resistance cell model to optimize finger spacings at concentrations between 500 and 2500 suns under uniform and nonuniform illumination. Optimization for maximum efficiency under Gaussian irradiance profiles is done by SPICE analysis. Relative to the optimized uniform illumination designs, we find enhancements of 0.5% to 2% in absolute efficiencies for uniform spacing. Efficiency enhancement with nonuniform spacing under nonuniform illumination is also evaluated. Our model suggests that, at lower concentrations (<1000 suns, the penalty for using uniformly spaced fingers instead of nonuniformly spaced fingers is <0.1%. However, at a concentration of 2500 suns the penalty increases to 0.3%. Thus, relative to a uniform irradiance optimization, an absolute efficiency increase of 2.3% can be attained for an optimized nonuniform spacing given the Gaussian irradiance profile under consideration.

  6. Bottom-Up Cost Analysis of a High Concentration PV Module; NREL (National Renewable Energy Laboratory)

    Energy Technology Data Exchange (ETDEWEB)

    Horowitz, K.; Woodhouse, M.; Lee, H.; Smestad, G.

    2015-04-13

    We present a bottom-up model of III-V multi-junction cells, as well as a high concentration PV (HCPV) module. We calculate $0.65/Wp(DC) manufacturing costs for our model HCPV module design with today’s capabilities, and find that reducing cell costs and increasing module efficiency offer the promising pathways for future cost reductions. Cell costs could be significantly reduced via an increase in manufacturing scale, substrate reuse, and improved manufacturing yields. We also identify several other significant drivers of HCPV module costs, including the Fresnel lens primary optic, module housing, thermal management, and the receiver board. These costs could potentially be lowered by employing innovative module designs.

  7. Methods and devices for high-throughput dielectrophoretic concentration

    Energy Technology Data Exchange (ETDEWEB)

    Simmons, Blake A. (San Francisco, CA); Cummings, Eric B. (Livermore, CA); Fiechtner, Gregory J. (Germantown, MD); Fintschenko, Yolanda (Livermore, CA); McGraw, Gregory J. (Ann Arbor, MI); Salmi, Allen (Escalon, CA)

    2010-02-23

    Disclosed herein are methods and devices for assaying and concentrating analytes in a fluid sample using dielectrophoresis. As disclosed, the methods and devices utilize substrates having a plurality of pores through which analytes can be selectively prevented from passing, or inhibited, on application of an appropriate electric field waveform. The pores of the substrate produce nonuniform electric field having local extrema located near the pores. These nonuniform fields drive dielectrophoresis, which produces the inhibition. Arrangements of electrodes and porous substrates support continuous, bulk, multi-dimensional, and staged selective concentration.

  8. Methods and devices for high-throughput dielectrophoretic concentration

    Science.gov (United States)

    Simmons, Blake A.; Cummings, Eric B.; Fiechtner, Gregory J.; Fintschenko, Yolanda; McGraw, Gregory J.; Salmi, Allen

    2010-02-23

    Disclosed herein are methods and devices for assaying and concentrating analytes in a fluid sample using dielectrophoresis. As disclosed, the methods and devices utilize substrates having a plurality of pores through which analytes can be selectively prevented from passing, or inhibited, on application of an appropriate electric field waveform. The pores of the substrate produce nonuniform electric field having local extrema located near the pores. These nonuniform fields drive dielectrophoresis, which produces the inhibition. Arrangements of electrodes and porous substrates support continuous, bulk, multi-dimensional, and staged selective concentration.

  9. Dynamic regulation of intracellular Ca2+ concentration in aortic endothelial cells.

    Science.gov (United States)

    Oike, M; Ito, Y

    1997-01-29

    In non-excitable cells, a Ca2+ entry pathway is opened after the depletion of intracellular Ca2+ store sites. We have tried to estimate the sensitivity of this pathway to Ca2+ release using bovine aortic endothelial cells. Single application of a high concentration (30 microM) of ATP released almost all stored Ca2+ in Ca(2+)-free extracellular solution, whereas a low concentration of ATP (30 nM) produced a partial (57.3 +/- 3.0%) release of Ca2+. By 10 min of Ca2+ re-perfusion, the Ca2+ store site was reloaded to 97.1% of its initial filling state. When thapsigargin was applied to this cell in Mn2+ solution, Mn(2+)-induced quenching of fura-2 dye started when 19.3 +/- 5.3% of Ca2+ release, produced by 30 nM ATP, had occurred. Therefore, Ca2+ release required for Mn2+ entry was estimated as 11.1 +/- 3.0% of stored Ca2+. These results indicate that intracellular Ca2+ concentration is controlled dynamically by simultaneously occurring Ca2+ release and entry in bovine aortic endothelial cells.

  10. High Quantum Efficiency and High Concentration Erbium-Doped Silica Glasses Fabricated by Sintering Nanoporous Glasses

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    A new method was used to prepare erbium-doped high silica (SiO2%>96%) glasses by sintering nanoporous glasses. The concentration of erbium ions in high silica glasses can be considerably more than that in silica glasses prepared by using conventional methods. The fluorescence of 1532 nm has an FWHM (Full Wave at Half Maximum) of 50 nm, wider than 35 nm of EDSFA (erbium-doped silica fiber amplifer), and hence the glass possesses potential application in broadband fiber amplifiers. The Judd-Ofelt theoretical analysis reflects that the quantum efficiency of this erbium-doped glass is about 0.78, although the erbium concentration in this glass (6×103) is about twenty times higher than that in silica glass. These excellent characteristics of Er-doped high silica glass will be conducive to its usage in optical amplifiers and microchip lasers.

  11. Flexible thermal cycle test equipment for concentrator solar cells

    Science.gov (United States)

    Hebert, Peter H [Glendale, CA; Brandt, Randolph J [Palmdale, CA

    2012-06-19

    A system and method for performing thermal stress testing of photovoltaic solar cells is presented. The system and method allows rapid testing of photovoltaic solar cells under controllable thermal conditions. The system and method presents a means of rapidly applying thermal stresses to one or more photovoltaic solar cells in a consistent and repeatable manner.

  12. Influence of discrete and continuous culture conditions on human mesenchymal stem cell lineage choice in RGD concentration gradient hydrogels.

    Science.gov (United States)

    Smith Callahan, Laura A; Policastro, Gina M; Bernard, Sharon L; Childers, Erin P; Boettcher, Ronna; Becker, Matthew L

    2013-09-09

    Stem cells have shown lineage-specific differentiation when cultured on substrates possessing signaling groups derived from the native tissue. A distinct determinant in this process is the concentration of the signaling motif. While several groups have been working actively to determine the specific factors, concentrations, and mechanisms governing the differentiation process, many have been turning to combinatorial and gradient approaches in attempts to optimize the multiple chemical and physical parameters needed for the next advance. However, there has not been a direct comparison between the cellular behavior and differentiation of human mesenchymal stem cells cultured in gradient and discrete substrates, which quantitates the effect of differences caused by cell-produced, soluble factors due to design differences between the culture systems. In this study, the differentiation of human mesenchymal stem cells in continuous and discrete polyethylene glycol dimethacrylate (PEGDM) hydrogels containing an RGD concentration gradient from 0 to 14 mM were examined to study the effects of the different culture conditions on stem-cell behavior. Culture condition was found to affect every osteogenic (alkaline phosphatase, Runx 2, type 1 collagen, bone sailoprotein, and calcium content) and adipogenic marker (oil red and peroxisome proliferator-activated receptor gamma) examined regardless of RGD concentration. Only in the continuous gradient culture did RGD concentration affect human mesenchymal stem-cell lineage commitment with low RGD concentrations expressing higher osteogenic differentiation than high RGD concentrations. Conversely, high RGD concentrations expressed higher adipogenic differentiation than low RGD concentrations. Cytoskeletal actin organization was only affected by culture condition at low RGD concentrations, indicating that it played a limited role in the differences in lineage commitment observed. Therefore, the role of discrete versus gradient

  13. A high temperature hybrid photovoltaic-thermal receiver employing spectral beam splitting for linear solar concentrators

    Science.gov (United States)

    Mojiri, Ahmad; Stanley, Cameron; Rosengarten, Gary

    2015-09-01

    Hybrid photovoltaic/thermal (PV-T) solar collectors are capable of delivering heat and electricity concurrently. Implementing such receivers in linear concentrators for high temperature applications need special considerations such as thermal decoupling of the photovoltaic (pv) cells from the thermal receiver. Spectral beam splitting of concentrated light provides an option for achieving this purpose. In this paper we introduce a relatively simple hybrid receiver configuration that spectrally splits the light between a high temperature thermal fluid and silicon pv cells using volumetric light filtering by semi-conductor doped glass and propylene glycol. We analysed the optical performance of this device theoretically using ray tracing and experimentally through the construction and testing of a full scale prototype. The receiver was mounted on a commercial parabolic trough concentrator in an outdoor experiment. The prototype receiver delivered heat and electricity at total thermal efficiency of 44% and electrical efficiency of 3.9% measured relative to the total beam energy incident on the primary mirror.

  14. Concentrated fed-batch cell culture increases manufacturing capacity without additional volumetric capacity.

    Science.gov (United States)

    Yang, William C; Minkler, Daniel F; Kshirsagar, Rashmi; Ryll, Thomas; Huang, Yao-Ming

    2016-01-10

    Biomanufacturing factories of the future are transitioning from large, single-product facilities toward smaller, multi-product, flexible facilities. Flexible capacity allows companies to adapt to ever-changing pipeline and market demands. Concentrated fed-batch (CFB) cell culture enables flexible manufacturing capacity with limited volumetric capacity; it intensifies cell culture titers such that the output of a smaller facility can rival that of a larger facility. We tested this hypothesis at bench scale by developing a feeding strategy for CFB and applying it to two cell lines. CFB improved cell line A output by 105% and cell line B output by 70% compared to traditional fed-batch (TFB) processes. CFB did not greatly change cell line A product quality, but it improved cell line B charge heterogeneity, suggesting that CFB has both process and product quality benefits. We projected CFB output gains in the context of a 2000-L small-scale facility, but the output was lower than that of a 15,000-L large-scale TFB facility. CFB's high cell mass also complicated operations, eroded volumetric productivity, and showed our current processes require significant improvements in specific productivity in order to realize their full potential and savings in manufacturing. Thus, improving specific productivity can resolve CFB's cost, scale-up, and operability challenges.

  15. Mechanisms for tolerance of very high tissue phosphorus concentrations in Ptilotus polystachyus.

    Science.gov (United States)

    Aziz, Tariq; Lambers, Hans; Nicol, Dion; Ryan, Megan H

    2015-04-01

    Study of plants with unusual phosphorus (P) physiology may assist development of more P-efficient crops. Ptilotus polystachyus grows well at high P supply, when shoot P concentrations ([P]) may exceed 40 mg P g(-1) dry matter (DM). We explored the P physiology of P. polystachyus seedlings grown in nutrient solution with 0-5 mM P. In addition, young leaves and roots of soil-grown plants were used for cryo-scanning electron microscopy and X-ray microanalysis. No P-toxicity symptoms were observed, even at 5 mM P in solution. Shoot DM was similar at 0.1 and 1.0 mM P in solution, but was ∼14% lower at 2 and 5 mM P. At 1 mM P, [P] was 36, 18, 14 and 11 mg P g(-1) DM in mature leaves, young leaves, stems and roots, respectively. Leaf potassium, calcium and magnesium concentrations increased with increasing P supply. Leaf epidermal and palisade mesophyll cells had similar [P]. The root epidermis and most cortical cells had senesced, even in young roots. We conclude that preferential accumulation of P in mature leaves, accumulation of balancing cations and uniform distribution of P across leaf cell types allow P. polystachyus to tolerate very high leaf [P].

  16. HIGH TEMPERATURE POLYMER FUEL CELLS

    DEFF Research Database (Denmark)

    Jensen, Jens Oluf; Qingfeng, Li; He, Ronghuan

    2003-01-01

    This paper will report recent results from our group on polymer fuel cells (PEMFC) based on the temperature resistant polymer polybenzimidazole (PBI), which allow working temperatures up to 200°C. The membrane has a water drag number near zero and need no water management at all. The high working...... temperature allows for utilization of the excess heat for fuel processing. Moreover, it provides an excellent CO tolerance of several percent, and the system needs no purification of hydrogen from a reformer. Continuous service for over 6 months at 150°C has been demonstrated....

  17. Highly doped layer for tunnel junctions in solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Fetzer, Christopher M.

    2017-08-01

    A highly doped layer for interconnecting tunnel junctions in multijunction solar cells is presented. The highly doped layer is a delta doped layer in one or both layers of a tunnel diode junction used to connect two or more p-on-n or n-on-p solar cells in a multijunction solar cell. A delta doped layer is made by interrupting the epitaxial growth of one of the layers of the tunnel diode, depositing a delta dopant at a concentration substantially greater than the concentration used in growing the layer of the tunnel diode, and then continuing to epitaxially grow the remaining tunnel diode.

  18. Dimerization in Highly Concentrated Solutions of Phosphoimidazolide Activated Monomucleotides

    Science.gov (United States)

    Kanavarioti, Anastassia

    1997-08-01

    Phosphoimidazolide activated ribomononucleotides (*pN) are useful substrates for the non-enzymatic synthesis of polynucleotides. However, dilute neutral aqueous solutions of *pN typically yield small amounts of dimers and traces of polymers; most of *pN hydrolyzes to yield nucleoside 5'-monophosphate. Here we report the self-condensation of nucleoside 5'-phosphate 2-methylimidazolide (2-MeImpN with N = cytidine, uridine or guanosine) in the presence of Mg2+ in concentrated solutions, such as might have been found in an evaporating lagoon on prebiotic Earth. The product distribution indicates that oligomerization is favored at the expense of hydrolysis. At 1.0 M, 2-MeImpU and 2-MeImpC produce about 65% of oligomers including 4% of the 3',5'-linked dimer. Examination of the product distribution of the three isomeric dimers in a self-condensation allows identification of reaction pathways that lead to dimer formation. Condensations in a concentrated mixture of all three nucleotides (U,C,G mixtures) is made possible by the enhanced solubility of 2-MeImpG in such mixtures. Although percent yield of internucleotide linked dimers is enhanced as a function of initial monomer concentration, pyrophosphate dimer yields remain practically unchanged at about 20% for 2-MeImpU, 16% for 2-MeImpC and 25% of the total pyrophosphate in the U,C,G mixtures. The efficiency by which oligomers are produced in these concentrated solutions makes the evaporating lagoon scenario a potentially interesting medium for the prebiotic synthesis of dimers and short RNAs.

  19. High concentrations of pepsin in bronchoalveolar lavage fluid from children with cystic fibrosis are associated with high interleukin-8 concentrations.

    LENUS (Irish Health Repository)

    McNally, P

    2012-02-01

    BACKGROUND: Gastro-oesophageal reflux is common in children with cystic fibrosis (CF) and is thought to be associated with pulmonary aspiration of gastric contents. The measurement of pepsin in bronchoalveolar lavage (BAL) fluid has recently been suggested to be a reliable indicator of aspiration. The prevalence of pulmonary aspiration in a group of children with CF was assessed and its association with lung inflammation investigated. METHODS: This was a cross-sectional case-control study. BAL fluid was collected from individuals with CF (n=31) and healthy controls (n=7). Interleukin-8 (IL-8), pepsin, neutrophil numbers and neutrophil elastase activity levels were measured in all samples. Clinical, microbiological and lung function data were collected from medical notes. RESULTS: The pepsin concentration in BAL fluid was higher in the CF group than in controls (mean (SD) 24.4 (27.4) ng\\/ml vs 4.3 (4.0) ng\\/ml, p=0.03). Those with CF who had raised pepsin concentrations had higher levels of IL-8 in the BAL fluid than those with a concentration comparable to controls (3.7 (2.7) ng\\/ml vs 1.4 (0.9) ng\\/ml, p=0.004). Within the CF group there was a moderate positive correlation between pepsin concentration and IL-8 in BAL fluid (r=0.48, p=0.04). There was no association between BAL fluid pepsin concentrations and age, sex, body mass index z score, forced expiratory volume in 1 s or Pseudomonas aeruginosa colonisation status. CONCLUSIONS: Many children with CF have increased levels of pepsin in the BAL fluid compared with normal controls. Increased pepsin levels were associated with higher IL-8 concentrations in BAL fluid. These data suggest that aspiration of gastric contents occurs in a subset of patients with CF and is associated with more pronounced lung inflammation.

  20. Drying and hydration of proteins at high concentration

    NARCIS (Netherlands)

    Bouman, J.

    2015-01-01

    Proteins are the building blocks of life and serve a wide range of essential functions in organisms. Many metabolic reactions in organisms are catalysed by enzymes, DNA is replicated by proteins and in cells proteins often facilitate active transport of e.g. glucose or ions. Proteins also serve an e

  1. High pressure inertial focusing for separating and concentrating bacteria at high throughput

    Science.gov (United States)

    Cruz, J.; Hooshmand Zadeh, S.; Graells, T.; Andersson, M.; Malmström, J.; Wu, Z. G.; Hjort, K.

    2017-08-01

    Inertial focusing is a promising microfluidic technology for concentration and separation of particles by size. However, there is a strong correlation of increased pressure with decreased particle size. Theory and experimental results for larger particles were used to scale down the phenomenon and find the conditions that focus 1 µm particles. High pressure experiments in robust glass chips were used to demonstrate the alignment. We show how the technique works for 1 µm spherical polystyrene particles and for Escherichia coli, not being harmful for the bacteria at 50 µl min-1. The potential to focus bacteria, simplicity of use and high throughput make this technology interesting for healthcare applications, where concentration and purification of a sample may be required as an initial step.

  2. Methods to homogenize electrochemical concentration cell (ECC) ozonesonde measurements across changes in sensing solution concentration or ozonesonde manufacturer

    Science.gov (United States)

    Deshler, Terry; Stübi, Rene; Schmidlin, Francis J.; Mercer, Jennifer L.; Smit, Herman G. J.; Johnson, Bryan J.; Kivi, Rigel; Nardi, Bruno

    2017-06-01

    Ozone plays a significant role in the chemical and radiative state of the atmosphere. For this reason there are many instruments used to measure ozone from the ground, from space, and from balloons. Balloon-borne electrochemical cell ozonesondes provide some of the best measurements of the ozone profile up to the mid-stratosphere, providing high vertical resolution, high precision, and a wide geographic distribution. From the mid-1990s to the late 2000s the consistency of long-term records from balloon-borne ozonesondes has been compromised by differences in manufacturers, Science Pump (SP) and ENSCI (EN), and differences in recommended sensor solution concentrations, 1.0 % potassium iodide (KI) and the one-half dilution: 0.5 %. To investigate these differences, a number of organizations have independently undertaken comparisons of the various ozonesonde types and solution concentrations, resulting in 197 ozonesonde comparison profiles. The goal of this study is to derive transfer functions to allow measurements outside of standard recommendations, for sensor composition and ozonesonde type, to be converted to a standard measurement and thus homogenize the data to the expected accuracy of 5 % (10 %) in the stratosphere (troposphere). Subsets of these data have been analyzed previously and intermediate transfer functions derived. Here all the comparison data are analyzed to compare (1) differences in sensor solution composition for a single ozonesonde type, (2) differences in ozonesonde type for a single sensor solution composition, and (3) the World Meteorological Organization's (WMO) and manufacturers' recommendations of 1.0 % KI solution for Science Pump and 0.5 % KI for ENSCI. From the recommendations it is clear that ENSCI ozonesondes and 1.0 % KI solution result in higher amounts of ozone sensed. The results indicate that differences in solution composition and in ozonesonde type display little pressure dependence at pressures ≥ 30 hPa, and thus the transfer

  3. Methods to homogenize electrochemical concentration cell (ECC ozonesonde measurements across changes in sensing solution concentration or ozonesonde manufacturer

    Directory of Open Access Journals (Sweden)

    T. Deshler

    2017-06-01

    Full Text Available Ozone plays a significant role in the chemical and radiative state of the atmosphere. For this reason there are many instruments used to measure ozone from the ground, from space, and from balloons. Balloon-borne electrochemical cell ozonesondes provide some of the best measurements of the ozone profile up to the mid-stratosphere, providing high vertical resolution, high precision, and a wide geographic distribution. From the mid-1990s to the late 2000s the consistency of long-term records from balloon-borne ozonesondes has been compromised by differences in manufacturers, Science Pump (SP and ENSCI (EN, and differences in recommended sensor solution concentrations, 1.0 % potassium iodide (KI and the one-half dilution: 0.5 %. To investigate these differences, a number of organizations have independently undertaken comparisons of the various ozonesonde types and solution concentrations, resulting in 197 ozonesonde comparison profiles. The goal of this study is to derive transfer functions to allow measurements outside of standard recommendations, for sensor composition and ozonesonde type, to be converted to a standard measurement and thus homogenize the data to the expected accuracy of 5 % (10 % in the stratosphere (troposphere. Subsets of these data have been analyzed previously and intermediate transfer functions derived. Here all the comparison data are analyzed to compare (1 differences in sensor solution composition for a single ozonesonde type, (2 differences in ozonesonde type for a single sensor solution composition, and (3 the World Meteorological Organization's (WMO and manufacturers' recommendations of 1.0 % KI solution for Science Pump and 0.5 % KI for ENSCI. From the recommendations it is clear that ENSCI ozonesondes and 1.0 % KI solution result in higher amounts of ozone sensed. The results indicate that differences in solution composition and in ozonesonde type display little pressure dependence at pressures

  4. New PSA high concentration solar furnace SF40

    Science.gov (United States)

    Rodriguez, Jose; Cañadas, Inmaculada; Zarza, Eduardo

    2016-05-01

    A new solar furnace has been designed and built at Plataforma Solar de Almería. In this work, its main components such as heliostat, concentrator, attenuator and test table, and the method used to align them are described. Other equipment like the auxiliary systems necessary for the solar operation, vacuum chamber and gas system are outlined too. Finally, the thermal characteristics of the focus were measured during a test campaign, where different planes along the optical axis were scanned with a radiometer, and the peak flux was obtained and is presented in the last section of this report.

  5. Material and Optical Design Rules for High Performance Luminescent Solar Concentrators

    Science.gov (United States)

    Bronstein, Noah Dylan

    This dissertation will highlight a path to achieve high photovoltaic conversion efficiency in luminescent solar concentrators, devices which absorb sunlight with a luminescent dye and then re-emit it into a waveguide where it is ultimately collected by a photovoltaic cell. Luminescent concentrators have been studied for more than three decades as potential low-cost but not high efficiency photovoltaics. Astute application of the blackbody radiation law indicates that photonic design is necessary to achieve high efficiency: a reflective filter must be used to trap luminescence at all angles while allowing higher energy photons to pass through. In addition, recent advances in the synthesis of colloidal nanomaterials have created the possibility for lumophores with broad absorption spectra, narrow-bandwidth emission, high luminescence quantum yield, tunable Stokes shifts and tunable Stokes ratios. Together, these factors allow luminescent solar concentrators to achieve the optical characteristics necessary for high efficiency. We have fabricated and tested the first generation of these devices. Our experiments demonstrate that the application of carefully matched photonic mirrors and luminescent quantum dots can allow luminescent concentration factors to reach record values while maintaining high photon collection efficiency. Finally, the photonic mirror dramatically mitigates the negative impact of scattering in the waveguide, allowing efficient photon collection over distances much longer than the scattering length of the waveguide. After demonstrating the possibility for high performance, we theoretically explore the efficacy of luminescent concentrators with dielectric reflectors as the high-bandgap top-junctions in two-junction devices. Simple thermodynamic calculations indicate that this approach can be nearly as good as a traditional vertically stacked tandem. The major barriers to such a device are the optical design of narrow-bandwidth, angle

  6. Lygus hesperus (Heteroptera: Miridae) tolerates high concentrations of dietary nickel

    Institute of Scientific and Technical Information of China (English)

    ROBERT S. BOYD

    2007-01-01

    Nickel hyperaccumulator plants contain unusually elevated levels of Ni (> 1 000 μg Ni/g). Some insect herbivores, including Lygus hesperus (Western tarnished plant bug), have been observed feeding on the California Ni hyperaccumulator Streptanthus polygaloides. This bug may be able to utilize S. polygaloides as a host either through its feeding behavior or by physiological tolerance of Ni. This experiment determined the Ni tolerance of L. hesperus by offering insects artificial diet amended with 0,0.4, 1, 2, 4.5,10, 20 and 40 mmol Ni/L and recording survival. Survival varied due to Ni concentration, with diets containing 10 mmol Ni/L and greater resulting in significantly lower survival compared to the control (0 mmol Ni/L) treatment. Insects tolerated diet containing as much as 4.5 mmol Ni/L, a relatively elevated Ni concentration. I conclude that L. hesperus can feed on S. polygaloides because it is Ni-tolerant, probably due to physiological mechanisms that provide it with resistance to plant chemical defenses including elemental defenses such as hyperaccumulated Ni.

  7. Materials for high-temperature fuel cells

    CERN Document Server

    Jiang, San Ping; Lu, Max

    2013-01-01

    There are a large number of books available on fuel cells; however, the majority are on specific types of fuel cells such as solid oxide fuel cells, proton exchange membrane fuel cells, or on specific technical aspects of fuel cells, e.g., the system or stack engineering. Thus, there is a need for a book focused on materials requirements in fuel cells. Key Materials in High-Temperature Fuel Cells is a concise source of the most important and key materials and catalysts in high-temperature fuel cells with emphasis on the most important solid oxide fuel cells. A related book will cover key mater

  8. Optical analysis and thermal management of 2-cell strings linear concentrating photovoltaic system

    Science.gov (United States)

    Reddy, K. S.; Kamnapure, Nikhilesh R.

    2015-09-01

    This paper presents the optical and thermal analyses for a linear concentrating photovoltaic/thermal collector under different operating conditions. Linear concentrating photovoltaic system (CPV) consists of a highly reflective mirror, a receiver and semi-dual axis tracking mechanism. The CPV receiver embodies two strings of triple-junction cells (100 cells in each string) adhered to a mild steel circular tube mounted at the focal length of trough. This system provides 560 W of electricity and 1580 W of heat which needs to be dissipated by active cooling. The Al2O3/Water nanofluid is used as heat transfer fluid (HTF) flowing through circular receiver for CPV cells cooling. Optical analysis of linear CPV system with 3.35 m2 aperture and geometric concentration ratio (CR) of 35 is carried out using Advanced System Analysis Program (ASAP) an optical simulation tool. Non-uniform intensity distribution model of solar disk is used to model the sun in ASAP. The impact of random errors including slope error (σslope), tracking error (σtrack) and apparent change in sun's width (σsun) on optical performance of collector is shown. The result from the optical simulations shows the optical efficiency (ηo) of 88.32% for 2-cell string CPV concentrator. Thermal analysis of CPV receiver is carried out with conjugate heat transfer modeling in ANSYS FLUENT-14. Numerical simulations of Al2O3/Water nanofluid turbulent forced convection are performed for various parameters such as nanoparticle volume fraction (φ), Reynolds number (Re). The addition of the nanoparticle in water enhances the heat transfer in the ranges of 3.28% - 35.6% for φ = 1% - 6%. Numerical results are compared with literature data which shows the reasonable agreement.

  9. Lack of prophylactic efficacy of oral maraviroc in macaques despite high drug concentrations in rectal tissues.

    Science.gov (United States)

    Massud, Ivana; Aung, Wutyi; Martin, Amy; Bachman, Shanon; Mitchell, James; Aubert, Rachael; Solomon Tsegaye, Theodros; Kersh, Ellen; Pau, Chou-Pong; Heneine, Walid; García-Lerma, J Gerardo

    2013-08-01

    Maraviroc (MVC) is a potent CCR5 coreceptor antagonist that is in clinical testing for daily oral pre-exposure prophylaxis (PrEP) for HIV prevention. We used a macaque model consisting of weekly SHIV162p3 exposures to evaluate the efficacy of oral MVC in preventing rectal SHIV transmission. MVC dosing was informed by the pharmacokinetic profile seen in blood and rectal tissues and consisted of a human-equivalent dose given 24 h before virus exposure, followed by a booster postexposure dose. In rectal secretions, MVC peaked at 24 h (10,242 ng/ml) with concentrations at 48 h that were about 40 times those required to block SHIV infection of peripheral blood mononuclear cells (PBMCs) in vitro. Median MVC concentrations in rectal tissues at 24 h (1,404 ng/g) were 30 and 10 times those achieved in vaginal or lymphoid tissues, respectively. MVC significantly reduced macrophage inflammatory protein 1β-induced CCR5 internalization in rectal mononuclear cells, an indication of efficient binding to CCR5 in rectal lymphocytes. The half-life of CCR5-bound MVC in PBMCs was 2.6 days. Despite this favorable profile, 5/6 treated macaques were infected during five rectal SHIV exposures as were 3/4 controls. MVC treatment was associated with a significant increase in the percentage of CD3(+)/CCR5(+) cells in blood. We show that high and durable MVC concentrations in rectal tissues are not sufficient to prevent SHIV infection in macaques. The increases in CD3(+)/CCR5(+) cells seen during MVC treatment point to unique immunological effects of CCR5 inhibition by MVC. The implications of these immunological effects on PrEP with MVC require further evaluation.

  10. High Energy Density Lithium Air Batteries for Oxygen Concentrators Project

    Data.gov (United States)

    National Aeronautics and Space Administration — For NASA's Exploration Medical Capabilities mission, extremely high specific energy power sources, with specific energy over 2000 Wh/kg, are urgently sought after....

  11. Accelerated aging of GaAs concentrator solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Gregory, P.E.

    1982-04-01

    An accelerated aging study of AlGaAs/GaAs solar cells has been completed. The purpose of the study was to identify the possible degradation mechanisms of AlGaAs/GaAs solar cells in terrestrial applications. Thermal storage tests and accelerated AlGaAs corrosion studies were performed to provide an experimental basis for a statistical analysis of the estimated lifetime. Results of this study suggest that a properly designed and fabricated AlGaAs/GaAs solar cell can be mechanically rugged and environmentally stable with projected lifetimes exceeding 100 years.

  12. Large-area, high-intensity PV arrays for systems using dish concentrating optics

    Energy Technology Data Exchange (ETDEWEB)

    Ward, J.S.; Duda, A.; Zweibel, K.; Coutts, T.J. [National Renewable Energy Lab., Golden, CO (United States)

    1998-09-01

    In this paper, the authors report on efforts to fabricate monolithic interconnected modules (MIMs) using III-V semiconductors with bandgaps appropriate for the terrestrial solar spectrum. The small size of the component cells comprising the MIM allows for operation at extremely high flux densities and relaxes the requirement for a small spot size to be generated by the optics. This makes possible a PV option for the large dish concentrator systems that have been developed by the solar thermal community for use with Stirling engines. Additionally, the highly effective back-surface reflector integrated into the MIM design is an effective tool for thermal management of the array. Development of this technology would radically alter the projections for PV manufacturing capacity because of the potential for extremely high power generation per unit area of semiconductor material.

  13. Interdigitated back contact solar cell with high-current collection

    Science.gov (United States)

    Garner, C. M.; Nasby, R. D.; Sexton, F. W.; Rodriguez, J. L.; Norwood, D. P.

    Internal current collection efficiencies greater than 90% and energy conversion efficiencies of 18 % at 30 suns were measured on a laboratory version of the interdigitated back contact (IBC) solar cell. A phosphorous gettering diffusion was performed on the front surface and then etched off to achieve these high current collection efficiencies. Thermal oxides were grown on the front and back of the cell to passivate the silicon surfaces. Although the internal collection efficiencies of the cell were high, series resistance caused the fill factor (FF) to decrease at concentrations above 30 suns. Dark current measurements on cells with a new grid spacing indicate that the series resistance is much lower than in the previous cell design. It is suggested that this should result in higher efficiencies at high concentration.

  14. Solar conversion by concentration cells with hydrides. [Based on hydrogen pressure differential across protonic conductor

    Energy Technology Data Exchange (ETDEWEB)

    Salomon, R.E.

    1979-01-01

    The efficiency of solar energy conversion in an electrochemical concentration cell which uses a metal hydride chemisorber is evaluated. It is shown that both constant volume and constant pressure cells can achieve the Carnot efficiency in principle. (SPH)

  15. Celecoxib concentration predicts decrease in prostaglandin E2 concentrations in nipple aspirate fluid from high risk women

    Directory of Open Access Journals (Sweden)

    Flynn John T

    2008-02-01

    Full Text Available Abstract Background Epidemiologic studies suggest that long term low dose celecoxib use significantly lowers breast cancer risk. We previously demonstrated that 400 mg celecoxib taken twice daily for 2 weeks lowered circulating plasma and breast nipple aspirate fluid (NAF prostaglandin (PGE2 concentrations in post- but not premenopausal high risk women. We hypothesized that circulating concentrations of celecoxib influenced PGE2 response, and that plasma levels of the drug are influenced by menopausal status. To address these hypotheses, the aims of the study were to determine: 1 if circulating plasma concentrations of celecoxib correlated with the change in plasma or NAF PGE2 concentrations from baseline to end of treatment, and 2 whether menopausal status influenced circulating levels of celecoxib. Methods Matched NAF and plasma were collected from 46 high risk women who were administered celecoxib twice daily for two weeks, 20 subjects receiving 200 mg and 26 subjects 400 mg of the agent. NAF and plasma samples were collected before and 2 weeks after taking celecoxib. Results In women taking 400 mg bid celecoxib, plasma concentrations of the agent correlated inversely with the change in NAF PGE2 levels from pre- to posttreatment. Nonsignificant trends toward higher celecoxib levels were observed in post- compared to premenopausal women. There was a significant decrease in NAF but not plasma PGE2 concentrations in postmenopausal women who took 400 mg celecoxib (p = 0.03. Conclusion In high risk women taking 400 mg celecoxib twice daily, plasma concentrations of celecoxib correlated with downregulation of PGE2 production by breast tissue. Strategies synergistic with celecoxib to downregulate PGE2 are of interest, in order to minimize the celecoxib dose required to have an effect.

  16. Calibration Of Collimated Flash Tester For High-Concentration Photovoltaic Panels

    Science.gov (United States)

    Green, Evan; Horne, Steve; Taylor, Sean; O'Bryan, Jon; Luo, Xin

    2011-12-01

    Accurate high volume manufacturing final test of high-concentration photovoltaic (HCPV) panels is challenging owing to the spectral sensitivity of multi-junction solar cells, the inherently small angular acceptance, and the elevated temperature during standard operating conditions (CSOC). An industrialized HCPV solar simulator developed in parallel with SolFocus first generation SF-1000S product has been previously discussed. Validation of the regression of simulator performance measurements from test conditions to CSOC was achieved by correlation of solar simulator and on-sun results using more than 100 SF-1000P panels. The second generation SF-1100S product incorporates a number of design and manufacturing advances including more efficient multi-junction solar cells, more thermally conductive receivers, more transmissive collection optics, and an optimized backpan, as well as a larger collection area. Each of these improvements can affect the accuracy of the regression from simulator test condition to SOC. To ensure that the SF-1100S product meets industry needs for power accuracy, we discuss the flash test methods and on-sun tests performed to quantify the thermal and optical parameters required for accurate regression to SOC. For cost reasons, cell temperature in standard commercial HCPV panels is not directly instrumented, hence we applied multiple independent measurement methods to ensure accurate estimation. We present best results for measurement of PV cell temperature under operating conditions comparing several methods. We review the correlation between normalized factory test results and standard operating conditions, along with sources of variance in the measurements.

  17. Influence of initial glycerol concentration upon bacterial cells ...

    African Journals Online (AJOL)

    user

    submerged aerated fixed bed reactor using Biocell®. (PE05) packing ... nitrogen, phosphorus and some oligo-elements with different initial chemical oxygen demand (COD) of: ... (Reaction 2) is related to multiplication of bacterial cells.

  18. Geobacter sp. SD-1 with enhanced electrochemical activity in high-salt concentration solutions.

    Science.gov (United States)

    Sun, Dan; Call, Douglas; Wang, Aijie; Cheng, Shaoan; Logan, Bruce E

    2014-12-01

    An isolate, designated strain SD-1, was obtained from a biofilm dominated by Geobacter sulfurreducens in a microbial fuel cell. The electrochemical activity of strain SD-1 was compared with type strains, G. sulfurreducens PCA and Geobacter metallireducens GS-15, and a mixed culture in microbial electrolysis cells. SD-1 produced a maximum current density of 290 ± 29 A m−3 in a high-concentration phosphate buffer solution (PBS-H, 200 mM). This current density was significantly higher than that produced by the mixed culture (189 ± 44 A m−3) or the type strains (Geobacter strains and mixed cultures in terms of its salt tolerance.

  19. Morphological characterization of cells in concentrated suspensions using multispectral diffuse optical tomography.

    Science.gov (United States)

    Hajihashemi, Mohammad Reza; Li, Xiaoqi; Jiang, Huabei

    2012-10-01

    Based on a non-spherical model of particle scattering, we investigate the capabilities and limitations of a T-matrix based inverse algorithm to morphologically characterize cells in concentrated suspensions. Here the cells are modeled as randomly orientated spheroidal particles with homogenous dielectric properties and suspended in turbid media. The inverse algorithm retrieves the geometrical parameters and the concentration of cells simultaneously by inverting the reduced scattering coefficient spectra obtained from multispectral diffuse optical tomography (MS-DOT). Both round and spheroidal cells are tested and the role of multiple and higher order scattering of particles on the performance of the algorithm is evaluated using different concentrations of cells.

  20. Advances towards reliable identification and concentration determination of rare cells in peripheral blood

    Science.gov (United States)

    Alemany Server, R.; Martens, D.; Jans, K.; Bienstman, P.; Hill, D.

    2016-03-01

    Through further development, integration and validation of micro-nano-bio and biophotonics systems FP7 CanDo is developing an instrument that will permit highly reproducible and reliable identification and concentration determination of rare cells in peripheral blood for two key societal challenges, early and low cost anti-cancer drug efficacy determination and cancer diagnosis/monitoring. A cellular link between the primary malignant tumour and the peripheral metastases, responsible for 90% of cancerrelated deaths, has been established in the form of circulating tumour cells (CTCs) in peripheral blood. Furthermore, the relatively short survival time of CTCs in peripheral blood means that their detection is indicative of tumour progression thereby providing in addition to a prognostic value an evaluation of therapeutic efficacy and early recognition of tumour progression in theranostics. In cancer patients however blood concentrations are very low (=1 CTC/1E9 cells) and current detection strategies are too insensitive, limiting use to prognosis of only those with advanced metastatic cancer. Similarly, problems occur in therapeutics with anti-cancer drug development leading to lengthy and costly trials often preventing access to market. The novel cell separation/Raman analysis technologies plus nucleic acid based molecular characterization of the CanDo platform will provide an accurate CTC count with high throughput and high yield meeting both key societal challenges. Being beyond the state of art it will lead to substantial share gains not just in the high end markets of drug discovery and cancer diagnostics but due to modular technologies also in others. Here we present preliminary DNA hybridization sensing results.

  1. Determination of water quality variables, endotoxin concentration, and enterobacteriaceae concentration and identification in Southern High Plains dairy lagoons

    Science.gov (United States)

    The objectives of this study were to determine the concentration of endotoxin, determine 20 water quality variables, and identify and enumerate fungal and bacterial pathogens from United States southern High Plains dairy lagoons and control lakes during summer and winter. Water samples were collecte...

  2. Mechanisms of astrocytic K(+) clearance and swelling under high extracellular K(+) concentrations.

    Science.gov (United States)

    Murakami, Shingo; Kurachi, Yoshihisa

    2016-03-01

    In response to the elevation of extracellular K(+) concentration ([K(+)]out), astrocytes clear excessive K(+) to maintain conditions necessary for neural activity. K(+) clearance in astrocytes occurs via two processes: K(+) uptake and K(+) spatial buffering. High [K(+)]out also induces swelling in astrocytes, leading to edema and cell death in the brain. Despite the importance of astrocytic K(+) clearance and swelling, the underlying mechanisms remain unclear. Here, we report results from a simulation analysis of astrocytic K(+) clearance and swelling. Astrocyte models were constructed by incorporating various mechanisms such as intra/extracellular ion concentrations of Na(+), K(+), and Cl(-), cell volume, and models of Na,K-ATPase, Na-K-Cl cotransporter (NKCC), K-Cl cotransporter, inwardly-rectifying K(+) (KIR) channel, passive Cl(-) current, and aquaporin channel. The simulated response of astrocyte models under the uniform distribution of high [K(+)]out revealed significant contributions of NKCC and Na,K-ATPase to increases of intracellular K(+) and Cl(-) concentrations, and swelling. Moreover, we found that, under the non-uniform distribution of high [K(+)]out, KIR channels localized at synaptic clefts absorbed excess K(+) by depolarizing the equivalent potential of K(+) (E K) above membrane potential, while K(+) released through perivascular KIR channels was enhanced by hyperpolarizing E K and depolarizing membrane potential. Further analysis of simulated drug effects revealed that astrocyte swelling was modulated by blocking each of the ion channels and transporters. Our simulation analysis revealed controversial mechanisms of astrocytic K(+) clearance and swelling resulting from complex interactions among ion channels and transporters.

  3. An astigmatic corrected target-aligned heliostat for high concentration

    Energy Technology Data Exchange (ETDEWEB)

    Zaibel, R.; Dagan, E.; Karni, J. [Solar Research Facility, The Weizmann Institute of Science, Rehovot (Israel); Ries, Harald [Ludwig-Maximilians-Universitaet, Sektion Physik, Munich (Germany)

    1995-05-28

    Conventional heliostats suffer from astigmatism for non-normal incidence. For tangential rays the focal length is shortened while for sagittal rays it is longer than the nominal focal length. Due to this astigmatism it is impossible to produce a sharp image of the sun, and the rays will be spread over a larger area. In order to correct this the heliostat should have different curvature radii along the sagittal and tangential direction in the heliostat plane just like a non axial part of a paraboloid. In conventional heliostats, where the first axis, fixed with respect to the ground, is vertical while the second, fixed with respect to the reflector surface, is horizontal, such an astigmatism correction is not practical because the sagittal and tangential directions rotate with respect to the reflector. We suggest an alternative mount where the first axis is oriented towards the target. The second axis, perpendicular to the first and tangent to the reflector, coincides with the tangential direction. With this mounting sagittal and tangential direction are fixed with respect to the reflector during operation. Therefore a partial astigmatism compensation is possible. We calculate the optimum correction and show the performance of the heliostat. We also show predicted yearly average concentrations

  4. THE EFFECT OF BLOOD AND MILK SERUM ZINC CONCENTRATION ON MILK SOMATIC CELL COUNT IN DAIRY COWS

    Directory of Open Access Journals (Sweden)

    Ivana Davidov

    2016-11-01

    Full Text Available The objective of this study was to evaluate the effect of blood and milk zinc concentration on somatic cell count and occurrence of subclinical mastitis cases. The study was performed on thirty Holstein cows approximate same body weight, ages 3 to 5 years, with equally milk production. Blood samples were taken after the morning milking from the caudal vein and milk from all four quarters was taken before morning milking. All samples of blood and milk were taken to determined zinc, using inductively coupled plasma mass spectrometry. 37.67% (11/30 cows have blood serum zinc concentration below 7µmol/l, and 63.33% or 19/30 cows have blood serum zinc concentration higher then 13µmol/l. Also 30% (9/30 cows have somatic cell count lower then 400.000/ml which indicate absence of subclinical mastitis, but 70% (21/30 cows have somatic cell count higher then 400.000/ml which indicate subclinical mastitis. Results indicate that cows with level of zinc in blood serum higher then 13 µmol/l have lower somatic cell count. Cows with lower zinc blood serum concentration then 7 µmol/l have high somatic cell count and high incidence of subclinical mastitis. According to results in this research there is no significant effect of milk serum zinc concentration on somatic cell count in dairy cows.

  5. 高盐高浓度废水微生物燃料电池的启动%Start-up performance of microbial fuel cells for purifying high salt concentration organic wastewater

    Institute of Scientific and Technical Information of China (English)

    付国楷; 廖凯森; 黄泽金; 刘美伶

    2014-01-01

    通过加入不同比例的乙醇辅助高盐高浓度废水条件下微生物燃料电池(microbial fuel cells,MFC)的启动实验,发现在加入乙醇的微生物燃料电池的启动,较不加入乙醇的微生物燃料电池的启动更容易.分别进行了乙醇加入量(经换算后所得COD值)为原水COD值的0%、5%、10%、15%和20%这5组实验,通过比较得出,乙醇加入量为原水COD值10%左右时,启动最佳.

  6. Emulsifier development for high-concentrated reverse emulsions

    OpenAIRE

    Kovalenko, I. L.; V.P. Kuprin

    2016-01-01

    The reverse emulsions have found broad application in ore mining industry as matrixes of emulsion explosive substances and boring washing waters. The defining characteristic of reverse emulsions of industrial explosive substances is the high stability and immunity to crystallization. Aim: The aim of this work is to assess the mechanism of emulsifiers effect like SMO and some PIBSA-derivatives, that are most abundantly used in world practice, and also to develop an effective domestic emulsifie...

  7. High urinary phthalate concentration associated with delayed pubarche in girls

    DEFF Research Database (Denmark)

    Frederiksen, H; Sørensen, K; Mouritsen, A;

    2012-01-01

    Phthalates are a group of chemicals present in numerous consumer products. They have anti-androgenic properties in experimental studies and are suspected to be involved in human male reproductive health problems. A few studies have shown associations between phthalate exposure and changes...... and controls. We demonstrated that delayed pubarche, but not thelarche, was associated with high phthalate excretion in urine samples from 725 healthy school girls, which may suggest anti-androgenic actions of phthalates in our study group of girls....

  8. Deep Sea Memory of High Atmospheric CO2 Concentration

    Science.gov (United States)

    Mathesius, Sabine; Hofmann, Matthias; Caldeira, Ken; Schellnhuber, Hans Joachim

    2015-04-01

    Carbon dioxide removal (CDR) from the atmosphere has been proposed as a powerful measure to mitigate global warming and ocean acidification. Planetary-scale interventions of that kind are often portrayed as "last-resort strategies", which need to weigh in if humankind keeps on enhancing the climate-system stock of CO2. Yet even if CDR could restore atmospheric CO2 to substantially lower concentrations, would it really qualify to undo the critical impacts of past emissions? In the study presented here, we employed an Earth System Model of Intermediate Complexity (EMIC) to investigate how CDR might erase the emissions legacy in the marine environment, focusing on pH, temperature and dissolved oxygen. Against a background of a world following the RCP8.5 emissions path ("business-as-usual") for centuries, we simulated the effects of two massive CDR interventions with CO2 extraction rates of 5 GtC yr-1 and 25 GtC yr-1, respectively, starting in 2250. We found that the 5 GtC yr-1 scheme would have only minor ameliorative influence on the oceans, even after several centuries of application. By way of contrast, the extreme 25 GtC yr-1 scheme eventually leads to tangible improvements. However, even with such an aggressive measure, past CO2 emissions leave a substantial legacy in the marine environment within the simulated period (i.e., until 2700). In summary, our study demonstrates that anthropogenic alterations of the oceans, caused by continued business-as-usual emissions, may not be reversed on a multi-centennial time scale by the most aspirational geoengineering measures. We also found that a transition from the RCP8.5 state to the state of a strong mitigation scenario (RCP2.6) is not possible, even under the assumption of extreme extraction rates (25 GtC yr-1). This is explicitly demonstrated by simulating additional scenarios, starting CDR already in 2150 and operating until the atmospheric CO2 concentration reaches 280 ppm and 180 ppm, respectively. The simulated

  9. High plasma uric acid concentration: causes and consequences

    Directory of Open Access Journals (Sweden)

    de Oliveira Erick

    2012-04-01

    Full Text Available Abstract High plasma uric acid (UA is a precipitating factor for gout and renal calculi as well as a strong risk factor for Metabolic Syndrome and cardiovascular disease. The main causes for higher plasma UA are either lower excretion, higher synthesis or both. Higher waist circumference and the BMI are associated with higher insulin resistance and leptin production, and both reduce uric acid excretion. The synthesis of fatty acids (tryglicerides in the liver is associated with the de novo synthesis of purine, accelerating UA production. The role played by diet on hyperuricemia has not yet been fully clarified, but high intake of fructose-rich industrialized food and high alcohol intake (particularly beer seem to influence uricemia. It is not known whether UA would be a causal factor or an antioxidant protective response. Most authors do not consider the UA as a risk factor, but presenting antioxidant function. UA contributes to > 50% of the antioxidant capacity of the blood. There is still no consensus if UA is a protective or a risk factor, however, it seems that acute elevation is a protective factor, whereas chronic elevation a risk for disease.

  10. 400 W High Temperature PEM Fuel Cell Stack Test

    DEFF Research Database (Denmark)

    Andreasen, Søren Juhl; Kær, Søren Knudsen

    2006-01-01

    This work demonstrates the operation of a 30 cell high temperature PEM (HTPEM) fuel cell stack. This prototype stack has been developed at the Institute of Energy Technology, Aalborg University, as a proof-of-concept for a low pressure cathode air cooled HTPEM stack. The membranes used are Celtec P...... of the species as in a LTPEM fuel cell system. The use of the HTPEM fuel cell makes it possible to use reformed gas at high CO concentrations, still with a stable efficient performance....

  11. Effects of cadmium on cation concentrations in sycamore cells (Acer pseudoplatanus L.): application of EDXRF.

    Science.gov (United States)

    Carvalho, M L; Silveira, L; Casimiro, A

    2002-04-01

    Knowledge of the element content of biological systems is important in enabling understanding of uptake mechanisms and physiological response to stress conditions. In this work concentrations of mineral elements in sycamore (Acer pseudoplatanus L.) cells grown in the presence of cadmium have been analysed and compared with concentrations in control cells. Energy-dispersive X-ray fluorescence (EDXRF) was used to quantify the nutrients K, Ca, Mn, Fe, Cu, and Zn present in the cells. The reproducibility and accuracy of the technique were demonstrated by analysis of biological reference materials. Exposure of sycamore cells to cadmium had induced variation in the content of some elements. Mn, Cu, Zn, and, particularly, Fe concentrations in cells exposed to Cd were higher than those found in control cells. Ca is adsorbed on the cell walls and the concentration of K is not affected by the presence of Cd.

  12. High-performance thin-layer chromatography for the evaluation of voacamine intracellular concentration related to its cytotoxic effect.

    Science.gov (United States)

    Condello, Maria; Multari, Giuseppina; Gallo, Francesca Romana; Arancia, Giuseppe; Meschini, Stefania

    2015-11-10

    Previous investigations demonstrated that pretreatment with non-cytotoxic concentrations of voacamine had a chemosensitizing effect on cultured multidrug resistant osteosarcoma cells exposed to doxorubicin; whereas when used alone at high concentrations voacamine induced apoptosis-independent cell death on both sensitive and resistant cells. To gain insight into the mechanism of action of voacamine at the subcellular level, we developed an analytical high-performance thin-layer chromatography technique to assess the intracellular content of voacamine that could be correlated with the induction of cell death and consequent morphological and ultrastructural changes. The results of the quantitative analysis not only did allow us to measure both the amount of unmodified voacamine molecules (determined by the method) and the amount of molecules which reacted with cellular components (undetectable), but also to confirm the findings of our previous studies and support the validity of this method. Copyright © 2015 Elsevier B.V. All rights reserved.

  13. Effects of Exterior Abscisic Acid on Calcium Distribution of Mesophyll Cells and Calcium Concentration of Guard Cells in Maize Seedlings

    Institute of Scientific and Technical Information of China (English)

    GUO Xiu-lin; MA Yuan-yuan; LIU Zi-hui; LIU Bin-hui

    2008-01-01

    In this study, the direct effects of exterior abscisic acid (ABA) on both calcium distribution of mesophyll cells and cytosolic calcium concentration of guard cells were examined. The distribution of Ca2+ localization were observed with calcium antimonate precipitate-electromicroscopic-cyto-chemical methods after treated with ABA and pretreated with ethylene glycol-bis-(2-aminoethylether)-N,N,N',N'-tetraacetic acid (EGTA), verapamil (Vp), and trifluoperazine (TFP). The laser scanning confocal microscopy was used to measure the cytosolic calcium concentrations of guard cells under different treatments. The results showed that the cytosolic Ca2+ concentration of mesophyll cells was induced to increase by ABA, but to decrease in both outside cell and the vacuoles within 10 min after treatments. The cytosolic calcium concentration of guard cells was increased gradually with the lag in treatment time. However, both EGTA and TFP could inverse those effects, indicating that the increase of cytosolic calcium induced by exterior ABA was mainly caused by calcium influx. The results also showed that calmodulin could influence both the calcium distribution of mesophyll cells and calcium concentration of guard cells. It shows that calmodulin participates in the process of ABA signal transduction, but the mechanism is not known as yet. The changes both calcium distribution of mesophyll cells and calcium concentration of guard cells further proved that the variations of cytosolic Ca2+ concentration induced by ABA were involved in the stomatal movements of maize seedlings.

  14. Characterization of blood donors with high haemoglobin concentration

    DEFF Research Database (Denmark)

    Magnussen, K; Hasselbalch, H C; Ullum, H;

    2013-01-01

    Background and Objectives  The literature contains little on the prevalence and causes of high predonation haemoglobin levels among blood donors. This study aimed to characterize and develop an algorithm to manage would-be donors with polycythaemia. Materials and Methods  Between November 2009......, erythropoietin, ferritin, platelet count and leucocyte count, JAK2 V617 and JAK2 exon12 analysis, as well as other routine measurements. Results  Among 46 such donors, 39 had a history of smoking, which contributes to erythrocytosis. Two had PV, five had severe hypertension, one of them because of renal artery...

  15. Waste to Energy Potential - A High Concentration Anaerobic Bioreactor

    Science.gov (United States)

    2012-05-23

    REPORT DATE 23 MAY 2012 2. REPORT TYPE 3. DATES COVERED 00-00-2012 to 00-00-2012 4. TITLE AND SUBTITLE Waste to Energy Potential - A High...and fermentative bacteria break down organic carbon to VFAs Acetogens break down VFAs to CH3CO2 − and H2 + Acetoclastic methanogens break...s -999999 999999 7 481 su -999999 999999 0 .. -999999 999999 HCA8 pti Flo$&-tdgc Tan.\\ feed su -999999 999999 0 .. -999999 999999 A-l>o -999999

  16. Proton pump activity of mitochondria-rich cells: The interpretation of external proton-concentration gradients

    DEFF Research Database (Denmark)

    Jensen, Lars Jørn; Sørensen, Jens N.; Larsen, Erik Hviid

    1997-01-01

    Active Cl*O- transport, reheogenic H*O+ pump, unstirred layer, mathematics of diffusion, proton concentration-profiles outside epithelial cells......Active Cl*O- transport, reheogenic H*O+ pump, unstirred layer, mathematics of diffusion, proton concentration-profiles outside epithelial cells...

  17. Impurity concentrations and surface charge densities on the heavily doped face of a silicon solar cell

    Science.gov (United States)

    Weinberg, I.; Hsu, L. C.

    1977-01-01

    Increased solar cell efficiencies are attained by reduction of surface recombination and variation of impurity concentration profiles at the n(+) surface of silicon solar cells. Diagnostic techniques are employed to evaluate the effects of specific materials preparation methodologies on surface and near surface concentrations. It is demonstrated that the MOS C-V method, when combined with a bulk measurement technique, yields more complete concentration data than are obtainable by either method alone. Specifically, new solar cell MOS C-V measurements are combined with bulk concentrations obtained by a successive layer removal technique utilizing measurements of sheet resistivity and Hall coefficient.

  18. Increasing efficiency of human mesenchymal stromal cell culture by optimization of microcarrier concentration and design of medium feed.

    Science.gov (United States)

    Chen, Allen Kuan-Liang; Chew, Yi Kong; Tan, Hong Yu; Reuveny, Shaul; Weng Oh, Steve Kah

    2015-02-01

    Large amounts of human mesenchymal stromal cells (MSCs) are needed for clinical cellular therapy. In a previous publication, we described a microcarrier-based process for expansion of MSCs. The present study optimized this process by selecting suitable basal media, microcarrier concentration and feeding regime to achieve higher cell yields and more efficient medium utilization. MSCs were expanded in stirred cultures on Cytodex 3 microcarriers with media containing 10% fetal bovine serum. Process optimization was carried out in spinner flasks. A 2-L bioreactor with an automated feeding system was used to validate the optimized parameters explored in spinner flask cultures. Minimum essential medium-α-based medium supported faster MSC growth on microcarriers than did Dulbecco's modified Eagle's medium (doubling time, 31.6 ± 1.4 vs 42 ± 1.7 h) and shortened the process time. At microcarrier concentration of 8 mg/mL, a high cell concentration of 1.08 × 10(6) cells/mL with confluent cell concentration of 4.7 × 10(4)cells/cm(2) was achieved. Instead of 50% medium exchange every 2 days, we have designed a full medium feed that is based on glucose consumption rate. The optimal medium feed that consisted of 1.5 g/L glucose supported MSC growth to full confluency while achieving the low medium usage efficiency of 3.29 mL/10(6)cells. Finally, a controlled bioreactor with the optimized parameters achieved maximal confluent cell concentration with 16-fold expansion and a further improved medium usage efficiency of 1.68 mL/10(6)cells. We have optimized the microcarrier-based platform for expansion of MSCs that generated high cell yields in a more efficient and cost-effective manner. This study highlighted the critical parameters in the optimization of MSC production process. Copyright © 2015 International Society for Cellular Therapy. Published by Elsevier Inc. All rights reserved.

  19. High efficiency micro solar cells integrated with lens array

    Science.gov (United States)

    Fidaner, Onur; Suarez, Ferran A.; Wiemer, Michael; Sabnis, Vijit A.; Asano, Tetsuya; Itou, Akihiro; Inoue, Daijiro; Hayashi, Nobuhiko; Arase, Hidekazu; Matsushita, Akio; Nakagawa, Tohru

    2014-03-01

    We demonstrate high efficiency triple junction solar cells with submillimeter dimensions in an all-back-contact architecture. 550 × 550 μm2 cells flash at 41.3% efficiency under the air mass 1.5 direct normal spectrum at 50 W/cm2 at 25 °C. Compared to standard size production cells, the micro cells have reduced performance at 1-sun due to perimeter recombination, but the performance gap closes at higher concentrations. Micro cells integrated with lens arrays were tested on-sun with an efficiency of 34.7%. All-back-contact architecture and submillimeter dimensions are advantageous for module integration and heat dissipation, allowing for high-performance, compact, lightweight, and cost-effective concentrated photovoltaic modules.

  20. Recent testing of secondary concentrators at NREL`s high-flux solar furnace

    Energy Technology Data Exchange (ETDEWEB)

    Jenkins, D.; Winston, R.; O`Gallagher, J. [Univ. of Chicago, IL (United States); Bingham, C.; Lewandowski, A.; Pitts, R.; Scholl, K. [National Renewable Energy Lab., Golden, CO (United States)

    1996-12-31

    Several tests have been completed on new secondary concentrators at the High-Flux Solar Furnace (HFSF) at the National Renewable Energy Laboratory (NREL). The first test measured the power from the exit of a High-Index secondary that achieves an average concentration of 50,000 suns. The second concentrator tested pumped an Nd:YAG laser crystal. The concentrator designs are presented, along with data from on-sun testing at the HFSF.

  1. Temporal Microbial Community Dynamics in Microbial Electrolysis Cells – Influence of Acetate and Propionate Concentration

    KAUST Repository

    Rao, Hari Ananda

    2017-07-20

    Microbial electrolysis cells (MECs) are widely considered as a next generation wastewater treatment system. However, fundamental insight on the temporal dynamics of microbial communities associated with MEC performance under different organic types with varied loading concentrations is still unknown, nevertheless this knowledge is essential for optimizing this technology for real-scale applications. Here, the temporal dynamics of anodic microbial communities associated with MEC performance was examined at low (0.5 g COD/L) and high (4 g COD/L) concentrations of acetate or propionate, which are important intermediates of fermentation of municipal wastewaters and sludge. The results showed that acetate-fed reactors exhibited higher performance in terms of maximum current density (I: 4.25 ± 0.23 A/m), coulombic efficiency (CE: 95 ± 8%), and substrate degradation rate (98.8 ± 1.2%) than propionate-fed reactors (I: 2.7 ± 0.28 A/m; CE: 68 ± 9.5%; substrate degradation rate: 84 ± 13%) irrespective of the concentrations tested. Despite of the repeated sampling of the anodic biofilm over time, the high-concentration reactors demonstrated lower and stable performance in terms of current density (I: 1.1 ± 0.14 to 4.2 ± 0.21 A/m), coulombic efficiency (CE: 44 ± 4.1 to 103 ± 7.2%) and substrate degradation rate (64.9 ± 6.3 to 99.7 ± 0.5%), while the low-concentration reactors produced higher and dynamic performance (I: 1.1 ± 0.12 to 4.6 ± 0.1 A/m; CE: 52 ± 2.5 to 105 ± 2.7%; substrate degradation rate: 87.2 ± 0.2 to 99.9 ± 0.06%) with the different substrates tested. Correlating reactor\\'s performance with temporal dynamics of microbial communities showed that relatively similar anodic microbial community composition but with varying relative abundances was observed in all the reactors despite differences in the substrate and concentrations tested. Particularly, Geobacter was the predominant bacteria on the anode biofilm of all MECs over time suggesting its

  2. The effect of the optical system on the electrical performance of III–V concentrator triple junction solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Schultz, R.D., E-mail: S206029578@nmmu.ac.za; Dyk, E.E. van; Vorster, F.J.

    2016-01-01

    High Concentrated Photovoltaic (H-CPV) technologies utilize relatively inexpensive reflective and refractive optical components for concentration to achieve high energy yield. The electrical performance of H-CPV systems is, however, dependent on the properties and configuration of the optical components. The focus of this paper is to summarize the effect of the properties of the optical system on the electrical performance of a Concentrator Triple Junction (CTJ) InGaP/InGaAs/Ge cell. Utilizing carefully designed experiments that include spectral measurements and intensity profiles in the optical plane of the CTJ cell, the influence of photon absorption, Fresnel lens properties and chromatic aberration created by the optical system on the electrical performance of a CTJ cell is shown. From the results obtained, it is concluded that good characterization and understanding of the optical system’s properties may add to improved design of future multi-junction devices.

  3. Optimizing Concentric Circular Antenna Arrays for High-Altitude Platforms Wireless Sensor Networks

    Directory of Open Access Journals (Sweden)

    Yasser Albagory

    2014-04-01

    Full Text Available Wireless Sensor Networks (WSN has gained interest in many applications and it becomes important to improve its performance. Antennas and communication performance are most important issues of WSN. In this paper, an adaptive concentric circular array (CCA is proposed to improve the link between the sink and sensor nodes. This technique is applied to the new High – Altitude Platform (HAP Wireless Sensor Network (WSN. The proposed array technique is applied for two coverage scenarios; a wider coverage cell of 30 km radius and a smaller cell of 8 km radius. The feasibility of the link is discussed where it shows the possibility of communications between the HAP sink station and sensor nodes located on the ground. The proposed CCA array is optimized using a modified Dolph-Chebyshev feeding function. A comparison with conventional antenna models in literature shows that the link performance in terms of bit energy to noise power spectral density ratio can be improved by up to 11.37 dB for cells of 8 km radius and 16.8 dB in the case of 30 km radius cells that make the link at 2.4 GHz feasible and realizable compared to using conventional antenna techniques.

  4. Pancreatic cancer with a high serum IgG4 concentration

    Institute of Scientific and Technical Information of China (English)

    Terumi Kamisawa; Pong Yui Chen; Yuyang Tu; Hitoshi Nakajima; Naoto Egawa; Kouji Tsuruta; Atsutake Okamoto; Tsunekazu Hishima

    2006-01-01

    Differentiation between autoimmune pancreatitis and pancreatic cancer is sometimes difficult. It has been reported that serum IgG4 concentrations are significantly elevated and particularly high (>135 mg/dL) in autoimmune pancreatitis. Measurement of serum IgG4 has become a useful tool for differentiating between autoimmune pancreatitis and pancreatic cancer. However,we present a 74-year-old female with a markedly elevated serum IgG4 (433 mg/dL) who underwentpancreaticoduodenectomy for pancreatic cancer. Elevated serum IgG4 levels continued after the resection. On histology, adenocarcinoma of the pancreas accompanied with moderate lymphoplasmacytic infiltration infiltrated the lower bile duct and duodenum, but there were no findings of autoimmune pancreatitis. Although a small metastasis was detected in one parapancreatic lymph node, regional lymph nodes were swollen. Abundant IgG4-positive plasma cells infiltrated the cancerous areas of the pancreas, but only a few IgG4-positive plasma cells were detected in the noncancerous areas.Pancreatic cancer cells were not immunoreactive for IgG4. An abundant infiltration of IgG4-positive plasma cells was detected in the swollen regional lymph nodes and in the duodenal mucosa. We believe that the serum IgG4 level was elevated in this patient with pancreatic cancer as the result of an IgG4-related systemic disease that had no clinical manifestations other than lymphadenopathy.

  5. High-order optical nonlinearities in nanocomposite films dispersed with semiconductor quantum dots at high concentrations

    Science.gov (United States)

    Tomita, Yasuo; Matsushima, Shun-suke; Yamagami, Ryu-ichi; Jinzenji, Taka-aki; Sakuma, Shohei; Liu, Xiangming; Izuishi, Takuya; Shen, Qing

    2017-06-01

    We describe the nonlinear optical properties of inorganic-organic nanocomposite films in which semiconductor CdSe quantum dots as high as 6.8 vol.% are dispersed. Open/closed Z-scan measurements, degenerate multi-wave mixing and femtosecond pump-probe/transient grating measurements are conducted. It is shown that the observed fifth-order optical nonlinearity has the cascaded third-order contribution that becomes prominent at high concentrations of CdSe QDs. It is also shown that there are picosecond-scale intensity-dependent and nanosecond-scale intensity-independent decay components in absorptive and refractive nonlinearities. The former is caused by the Auger process, while the latter comes from the electron-hole recombination process.

  6. Biological Effects of Osteoblast-Like Cells on Nanohydroxyapatite Particles at a Low Concentration Range

    OpenAIRE

    Xiaochen Liu; Jie Wei; Shicheng Wei

    2011-01-01

    The biological effects of osteoblast-like MG-63 cells on nanohydroxyapatite (n-HA) at the low concentration range (5–25  g/mL) for 5 days was investigated. The results showed the viability and actin cytoskeleton of the cells descended with the increase of the concentration of n-HA, and the actin cytoskeleton of cells was depolymerised and became more disordered. Apoptotic rate of cells (1.85%, 1.99%, and 2.29%) increased with the increase of n-HA concentration (5, 15, and 25  g/mL) and be...

  7. Modeled performance of monolithic, 3-terminal InP/Ga(0.47)In(0.53)As concentrator solar cells as a function of temperature and concentration ratio

    Science.gov (United States)

    Osterwald, C. R.; Wanlass, M. W.; Ward, J. S.; Keyes, B. M.; Emery, K. A.; Coutts, T. J.

    1991-01-01

    Using measured device parameters from a monolithic three-terminal In/GaInAs (0.75 eV) tandem concentrator solar cell, a numerical model is constructed that calculates efficiency as a function of temperature and concentration ratio. The device measurements indicate that the series resistance in the InP top cell severely limits the maximum efficiency at high concentration ratios. Results from the model in which a single-junction InP concentrator solar cell that has a lower resistance by a factor of six was substituted for the top cell show that peak 20 C air-mass-zero (AM0) efficiencies should approach 30 percent at concentration ratios greater than 100. At 80 C, this tandem cell should exceed 24 percent AM0 efficiency.

  8. Tropical soils with high aluminum concentrations cause oxidative stress in two tomato genotypes.

    Science.gov (United States)

    Nogueirol, Roberta Corrêa; Monteiro, Francisco Antonio; Gratão, Priscila Lupino; Borgo, Lucélia; Azevedo, Ricardo Antunes

    2015-03-01

    Tropical and subtropical soils are usually acidic and have high concentrations of aluminum (Al). Aluminum toxicity in plants is caused by the high affinity of the Al cation for cell walls, membranes, and metabolites. In this study, the response of the antioxidant-enzymatic system to Al was examined in two tomato genotypes: Solanum lycopersicum var. esculentum (Calabash Rouge) and Solanum lycopersicum var. cerasiforme (CNPH 0082) grown in tropical soils with varying levels of Al. Plant growth; activities of superoxide dismutase (SOD), catalase (CAT), ascorbate peroxidase (APX), guaiacol peroxidase (GPOX), and glutathione reductase (GR) enzymes; stress-indicating compounds (malondialdehyde (MDA) and hydrogen peroxide); and morphology (root length and surface area) were analyzed. Increased levels of Al in soils were correlated with reduced shoot and root biomass and with reduced root length and surface area. Calabash Rouge exhibited low Al concentrations and increased growth in soils with the highest levels of Al. Plants grown in soils with high availability of Al exhibited higher levels of stress indicators (MDA and hydrogen peroxide) and higher enzyme activity (CAT, APX, GPOX, and GR). Calabash Rouge absorbed less Al from soils than CNPH 0082, which suggests that the genotype may possess mechanisms for Al tolerance.

  9. EXPERIMENTAL INVESTIGATIONS ON DIFFUSION CHARACTERISTICS OF HIGH CONCENTRATION JET FLOW IN NEAR REGION

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The diffusion characteristics of the high concentration jet flowissued from a round nozzle above the free surface into moving waterbody were experimentally investigated. By means of flow visualization technique, the diffusion behavior of the high concentration jet was observed and analysed, Concentration distribution in the near region was obtained by sampling and quantitative measurements. Experimental results indicate that the diffusion mechanics of the high concentration jet flow are greatly influenced by initial momentum, buoyancy, turbulent structure, ambient current and boundary conditions, showing complicated flow patterns and concentration distribution characteristics that are different from previous results for submerged jets.

  10. Small molecule ice recrystallization inhibitors enable freezing of human red blood cells with reduced glycerol concentrations.

    Science.gov (United States)

    Capicciotti, Chantelle J; Kurach, Jayme D R; Turner, Tracey R; Mancini, Ross S; Acker, Jason P; Ben, Robert N

    2015-04-08

    In North America, red blood cells (RBCs) are cryopreserved in a clinical setting using high glycerol concentrations (40% w/v) with slow cooling rates (~1°C/min) prior to storage at -80°C, while European protocols use reduced glycerol concentrations with rapid freezing rates. After thawing and prior to transfusion, glycerol must be removed to avoid intravascular hemolysis. This is a time consuming process requiring specialized equipment. Small molecule ice recrystallization inhibitors (IRIs) such as β-PMP-Glc and β-pBrPh-Glc have the ability to prevent ice recrystallization, a process that contributes to cellular injury and decreased cell viability after cryopreservation. Herein, we report that addition of 110 mM β-PMP-Glc or 30 mM β-pBrPh-Glc to a 15% glycerol solution increases post-thaw RBC integrity by 30-50% using slow cooling rates and emphasize the potential of small molecule IRIs for the preservation of cells.

  11. Effect of atrophy and contractions on myogenin mRNA concentration in chick and rat myoblast omega muscle cells

    Science.gov (United States)

    Krebs, J. M.; Denney, R. M.

    1997-01-01

    The skeletal rat myoblast omega (RMo) cell line forms myotubes that exhibit spontaneous contractions under appropriate conditions in culture. We examined if the RMo cells would provide a model for studying atrophy and muscle contraction. To better understand how to obtain contractile cultures, we examined levels of contraction under different growing conditions. The proliferation medium and density of plating affected the subsequent proportion of spontaneously contracting myotubes. Using a ribonuclease protection assay, we found that exponentially growing RMo myoblasts contained no detectable myogenin or herculin mRNA, while differentiating myoblasts contained high levels of myogenin mRNA but no herculin mRNA. There was no increase in myogenin mRNA concentration in either primary chick or RMo myotubes whose contractions were inhibited by depolarizing concentrations of potassium (K+). Thus, altered myogenin mRNA concentrations are not involved in atrophy of chick myotubes. Depolarizing concentrations of potassium inhibited spontaneous contractions in both RMo cultures and primary chick myotube cultures. However, we found that the myosin concentration of 6-d-old contracting RMo cells fed medium plus AraC was 11 +/- 3 micrograms myosin/microgram DNA, not significantly different from 12 +/- 4 micrograms myosin/microgram DNA (n = 3), the myosin concentration of noncontracting RMo cells (treated with 12 mM K+ for 6 d). Resolving how RMo cells maintained their myosin content when contraction is inhibited may be important for understanding atrophy.

  12. Fabrication Processes to Generate Concentration Gradients in Polymer Solar Cell Active Layers.

    Science.gov (United States)

    Inaba, Shusei; Vohra, Varun

    2017-05-09

    Polymer solar cells (PSCs) are considered as one of the most promising low-cost alternatives for renewable energy production with devices now reaching power conversion efficiencies (PCEs) above the milestone value of 10%. These enhanced performances were achieved by developing new electron-donor (ED) and electron-acceptor (EA) materials as well as finding the adequate morphologies in either bulk heterojunction or sequentially deposited active layers. In particular, producing adequate vertical concentration gradients with higher concentrations of ED and EA close to the anode and cathode, respectively, results in an improved charge collection and consequently higher photovoltaic parameters such as the fill factor. In this review, we relate processes to generate active layers with ED-EA vertical concentration gradients. After summarizing the formation of such concentration gradients in single layer active layers through processes such as annealing or additives, we will verify that sequential deposition of multilayered active layers can be an efficient approach to remarkably increase the fill factor and PCE of PSCs. In fact, applying this challenging approach to fabricate inverted architecture PSCs has the potential to generate low-cost, high efficiency and stable devices, which may revolutionize worldwide energy demand and/or help develop next generation devices such as semi-transparent photovoltaic windows.

  13. Fabrication Processes to Generate Concentration Gradients in Polymer Solar Cell Active Layers

    Science.gov (United States)

    Inaba, Shusei; Vohra, Varun

    2017-01-01

    Polymer solar cells (PSCs) are considered as one of the most promising low-cost alternatives for renewable energy production with devices now reaching power conversion efficiencies (PCEs) above the milestone value of 10%. These enhanced performances were achieved by developing new electron-donor (ED) and electron-acceptor (EA) materials as well as finding the adequate morphologies in either bulk heterojunction or sequentially deposited active layers. In particular, producing adequate vertical concentration gradients with higher concentrations of ED and EA close to the anode and cathode, respectively, results in an improved charge collection and consequently higher photovoltaic parameters such as the fill factor. In this review, we relate processes to generate active layers with ED–EA vertical concentration gradients. After summarizing the formation of such concentration gradients in single layer active layers through processes such as annealing or additives, we will verify that sequential deposition of multilayered active layers can be an efficient approach to remarkably increase the fill factor and PCE of PSCs. In fact, applying this challenging approach to fabricate inverted architecture PSCs has the potential to generate low-cost, high efficiency and stable devices, which may revolutionize worldwide energy demand and/or help develop next generation devices such as semi-transparent photovoltaic windows. PMID:28772878

  14. Optimization of catholyte concentration and anolyte pHs in two chamber microbial electrolysis cells

    KAUST Repository

    Nam, Joo-Youn

    2012-12-01

    The hydrogen production rate in a microbial electrolysis cell (MEC) using a non-buffered saline catholyte (NaCl) can be optimized through proper control of the initial anolyte pH and catholyte NaCl concentration. The highest hydrogen yield of 3.3 ± 0.4 mol H2/mole acetate and gas production rate of 2.2 ± 0.2 m3 H2/m3/d were achieved here with an initial anolyte pH = 9 and catholyte NaCl concentration of 98 mM. Further increases in the salt concentration substantially reduced the anolyte pH to as low as 4.6, resulting in reduced MEC performance due to pH inhibition of exoelectrogens. Cathodic hydrogen recovery was high (rcat > 90%) as hydrogen consumption by hydrogenotrophic methanogens was prevented by separating the anode and cathode chambers using a membrane. These results show that the MEC can be optimized for hydrogen production through proper choices in the concentration of a non-buffered saline catholyte and initial anolyte pH in two chamber MECs. Copyright © 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

  15. Vacuum MOCVD fabrication of high efficience cells

    Science.gov (United States)

    Partain, L. D.; Fraas, L. M.; Mcleod, P. S.; Cape, J. A.

    1985-01-01

    Vacuum metal-organic-chemical-vapor-deposition (MOCVD) is a new fabrication process with improved safety and easier scalability due to its metal rather than glass construction and its uniform multiport gas injection system. It uses source materials more efficiently than other methods because the vacuum molecular flow conditions allow the high sticking coefficient reactants to reach the substrates as undeflected molecular beams and the hot chamber walls cause the low sticking coefficient reactants to bounce off the walls and interact with the substrates many times. This high source utilization reduces the materials costs power device and substantially decreases the amounts of toxic materials that must be handled as process effluents. The molecular beams allow precise growth control. With improved source purifications, vacuum MOCVD has provided p GaAs layers with 10-micron minority carrier diffusion lengths and GaAs and GaAsSb solar cells with 20% AMO efficiencies at 59X and 99X sunlight concentration ratios. Mechanical stacking has been identified as the quickest, most direct and logical path to stacked multiple-junction solar cells that perform better than the best single-junction devices. The mechanical stack is configured for immediate use in solar arrays and allows interconnections that improve the system end-of-life performance in space.

  16. High-Cycle-Life Lithium Cell

    Science.gov (United States)

    Yen, S. P. S.; Carter, B.; Shen, D.; Somoano, R.

    1985-01-01

    Lithium-anode electrochemical cell offers increased number of charge/ discharge cycles. Cell uses components selected for compatibility with electrolyte solvent: These materials are wettable and chemically stable. Low vapor pressure and high electrochemical stability of solvent improve cell packaging, handling, and safety. Cell operates at modest temperatures - less than 100 degrees C - and is well suited to automotive, communications, and other applications.

  17. Emulsifier development for high-concentrated reverse emulsions

    Directory of Open Access Journals (Sweden)

    I.L. Kovalenko

    2016-05-01

    Full Text Available The reverse emulsions have found broad application in ore mining industry as matrixes of emulsion explosive substances and boring washing waters. The defining characteristic of reverse emulsions of industrial explosive substances is the high stability and immunity to crystallization. Aim: The aim of this work is to assess the mechanism of emulsifiers effect like SMO and some PIBSA-derivatives, that are most abundantly used in world practice, and also to develop an effective domestic emulsifier of reverse emulsions. Materials and methods: Using the semi-dynamic method with use of the reverse stalagmometer it was determined the decreasing in interfacial tension on “water / diesel fuel” border in the presence of 0.5 wt % sorbitan monooleate of various producers. Emulsions with use of the chosen emulsifiers using the dynamic mixer on the basis of monosolution of ammonium nitrate and diesel fuel have been produced. The emulsions have the following composition, wt %: ammonium nitrate – 76.8; water – 15.6; diesel fuel – 6.0; emulsifier – 1.6. Results: By the researches results of the interfacial tension “surfactant water / solution in diesel fuel”, the stability of emulsions using monosolution of ammonium nitrate and the IR spectrums of SMO of various producers it is established that presence in product of impurity of oleic acid, di- and trioleates leads to decreasing in interphase activity, increasing of emulsifier oil solubility and decreasing the resistance of emulsions to crystallization. On the basis of the spectral data analysis it is suggested about possibility of specific interaction on the mechanism of “spectral resonance” between emulsifiers of the PIBSA-MEA, LZX type and crystals nucleus of NH4NO3 ammonium nitrate in dispersed phase of emulsion. Amidation of vegetable oils by monoethanol amine is implemented at the reduced temperatures (90…100 °C. It was proved the availability mainly of fatty acids amides in product

  18. Impacts of CLA and dietary concentrate proportion on blood metabolite concentration and proliferation of peripheral blood mononuclear cells of periparturient dairy cows.

    Science.gov (United States)

    Petzold, M; Meyer, U; Kersten, S; Spilke, J; Breves, G; Dänicke, S

    2015-03-01

    The study aimed to examine effects of supplemented CLA to periparturient dairy cows receiving different concentrate proportions antepartum (a.p.) to investigate CLA effects on metabolism and immune function. Compared with adapted feeding, high-concentrate diet a.p. should induce a ketogenic metabolic situation postpartum (p.p.) to better understand how CLA works. A total of 64 pregnant German Holstein cows had ad libitum access to partial mixed rations based on concentrate and roughage 3 weeks before calving until day 60 p.p. A.p., cows received 100 g/day control fat (CON) or a CLA supplement, either in a low-concentrate (20%, CON-20, CLA-20) or high-concentrate diet (60%, CON-60, CLA-60). P.p., concentrate proportion was adjusted to 50% while fat supplementation continued. After day 32 p.p., half of the animals of CLA-groups changed to CON supplementation (CLA-20-CON, CLA-60-CON). A ketogenic metabolic state p.p. was not achieved and respective impacts of CLA could not be examined. Blood samples for isolation of peripheral blood mononuclear cells (PBMC) were collected on day -21, 7, 28 and 56 relative to calving. Blood chemistry samples were taken over the entire experimental period. Mitogen-stimulated proliferation of PBMC remained unaffected. Besides serum concentrations of triglycerides, total bilirubin, total protein, albumin and IGF-1, clinical-chemical serum characteristics remained uninfluenced by treatments. No post-supplementation effect could be observed. Measured blood metabolites and mitogen-stimulated proliferation of PBMC indicate that all groups had an increased metabolic stress around calving, whereby group CLA-20 was affected more severely. Overall, supplemented CLA did not positively affect metabolism or immune function of periparturient dairy cows. However, feeding CLA in a low-concentrate diet a.p. seems to increase liver stress around calving via reduced DMI.

  19. Microbubble moving in blood flow in microchannels: effect on the cell-free layer and cell local concentration.

    Science.gov (United States)

    Bento, David; Sousa, Lúcia; Yaginuma, Tomoko; Garcia, Valdemar; Lima, Rui; Miranda, João M

    2017-03-01

    Gas embolisms can hinder blood flow and lead to occlusion of the vessels and ischemia. Bubbles in microvessels circulate as tubular bubbles (Taylor bubbles) and can be trapped, blocking the normal flow of blood. To understand how Taylor bubbles flow in microcirculation, in particular, how bubbles disturb the blood flow at the scale of blood cells, experiments were performed in microchannels at a low Capillary number. Bubbles moving with a stream of in vitro blood were filmed with the help of a high-speed camera. Cell-free layers (CFLs) were observed downstream of the bubble, near the microchannel walls and along the centerline, and their thicknesses were quantified. Upstream to the bubble, the cell concentration is higher and CFLs are less clear. While just upstream of the bubble the maximum RBC concentration happens at positions closest to the wall, downstream the maximum is in an intermediate region between the centerline and the wall. Bubbles within microchannels promote complex spatio-temporal variations of the CFL thickness along the microchannel with significant relevance for local rheology and transport processes. The phenomenon is explained by the flow pattern characteristic of low Capillary number flows. Spatio-temporal variations of blood rheology may have an important role in bubble trapping and dislodging.

  20. Modulation of the Differentiation of Dental Pulp Stem Cells by Different Concentrations of β-Glycerophosphate

    Directory of Open Access Journals (Sweden)

    Weiping Hu

    2012-01-01

    Full Text Available Dentinogenesis is a necessary prerequisite for dental tissue engineering. One of the steps for dentinogenesis is to obtain large quantities of highly purified odontoblasts. Therefore, we have undertaken an experiment applying different concentrations of β-glycerophosphate (β-GP to induce the differentiation of dental pulp stem cells (DPSCs in a long-term 28-day culture. In the meanwhile, we have studied the time- and maturation-dependent expression of matrix extracellular phosphoglycoprotein (MEPE and that of the odontoblast-like marker-dentin sialoprotein (DSP, in order to investigate an optimized mineralized condition. Western blot results revealed that the expression of DSP became lower when accompanied by the increase of the β-GP concentration, and there was also an influence on MEPE expression when different concentrations of β-GP were applied. Meanwhile, the mineralized groups had an inhibitory function on the expression of MEPE as compared with the control group. Above all, all experimental groups successfully generated mineralized nodules by Alizarin Red S and the 5 mM β-GP group formed more mineralized nodules quantitated using the CPC extraction method. In conclusion, there is a significant modulation of the β-GP during the differentiation of the DPSCs. The degree of odontoblast differentiation is β-glycerophosphate concentration dependent. A low concentration of β-GP (5 mM has been shown to be the optimal concentration for stimulating the maturation of the DPSCs. Moreover, MEPE accompanied with DSP clearly demonstrates the degree of the differentiation.

  1. High-pressure and high-temperature differential scanning calorimeter for combined pressure-concentration-temperature measurements of hydrides.

    Science.gov (United States)

    Mauron, Ph; Bielmann, M; Bissig, V; Remhof, A; Züttel, A

    2009-09-01

    The design and construction of a high-pressure (200 bar) and high-temperature (600 degrees C) heat-flow differential scanning calorimeter (DSC) for the in situ investigation of the hydrogenation and dehydrogenation reactions of hydrides is presented. In combination with a pressure-concentration-temperature (pcT) system, simultaneous thermodynamic and volumetric measurements become accessible. Due to the high thermal conductivity of hydrogen, only the sample cell and the reference cell are exposed to hydrogen and the remaining system is under ambient conditions. This separation has the advantage that the calibration factor is independent of the hydrogen pressure. The internal empty volume of the combined system is as low as possible to maximize the precision of the pcT measurements. The calorimetric block of the DSC is designed with a silver/copper alloy and the temperature measurements are made resistively with platinum temperature sensors (Pt 100). The instrument was calibrated and its operability was successfully studied on the example of the hydrogen sorption behavior of LaNi(5).

  2. Experimental Study of Sorbitol Production by Zymomonas mobilis in High Sucrose Concentration

    OpenAIRE

    Rui Sérgio dos Santos Ferreira da Silva; João Batista Buzato; Maria Antonia Pedrine Colabone Celligoi; Marcos Roberto de Oliveira

    2004-01-01

    The sorbitol presents several industrial applications and its conventional production is of high cost and low yield. Sorbitol production by Zymomonas mobilis production has attracted attention as both production cost and environmental impact are low. The sorbitol plays an osmo-protective rule so that its production is promoted by high sugar concentrations. This work has evaluated the effect of high sucrose concentration in the sorbitol production. The raise of sucrose concentration from 100 t...

  3. Ethanol production from concentrated food waste hydrolysates with yeast cells immobilized on corn stalk.

    Science.gov (United States)

    Yan, Shoubao; Chen, Xiangsong; Wu, Jingyong; Wang, Pingchao

    2012-05-01

    The aim of the present study was to examine ethanol production from concentrated food waste hydrolysates using whole cells of S. cerevisiae immobilized on corn stalks. In order to improve cell immobilization efficiency, biological modification of the carrier was carried out by cellulase hydrolysis. The results show that proper modification of the carrier with cellulase hydrolysis was suitable for cell immobilization. The mechanism proposed, cellulase hydrolysis, not only increased the immobilized cell concentration, but also disrupted the sleek surface to become rough and porous, which enhanced ethanol production. In batch fermentation with an initial reducing sugar concentration of 202.64 ± 1.86 g/l, an optimal ethanol concentration of 87.91 ± 1.98 g/l was obtained using a modified corn stalk-immobilized cell system. The ethanol concentration produced by the immobilized cells was 6.9% higher than that produced by the free cells. Ethanol production in the 14th cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in an immobilized cell reactor, the maximum ethanol concentration of 84.85 g/l, and the highest ethanol yield of 0.43 g/g (of reducing sugar) were achieved at hydraulic retention time (HRT) of 3.10 h, whereas the maximum volumetric ethanol productivity of 43.54 g/l/h was observed at a HRT of 1.55 h.

  4. Ethanol production from concentrated food waste hydrolysates with yeast cells immobilized on corn stalk

    Energy Technology Data Exchange (ETDEWEB)

    Yan, Shoubao [Huainan Normal Univ., Anhui (China). School of Life Science; Chen, Xiangsong; Wu, Jingyong; Wang, Pingchao [Chinese Academy of Sciences, Hefei (China). Key Lab. of Ion Beam Bio-engineering of Inst. of Plasma Physics

    2012-05-15

    The aim of the present study was to examine ethanol production from concentrated food waste hydrolysates using whole cells of S. cerevisiae immobilized on corn stalks. In order to improve cell immobilization efficiency, biological modification of the carrier was carried out by cellulase hydrolysis. The results show that proper modification of the carrier with cellulase hydrolysis was suitable for cell immobilization. The mechanism proposed, cellulase hydrolysis, not only increased the immobilized cell concentration, but also disrupted the sleek surface to become rough and porous, which enhanced ethanol production. In batch fermentation with an initial reducing sugar concentration of 202.64 {+-} 1.86 g/l, an optimal ethanol concentration of 87.91 {+-} 1.98 g/l was obtained using a modified corn stalk-immobilized cell system. The ethanol concentration produced by the immobilized cells was 6.9% higher than that produced by the free cells. Ethanol production in the 14th cycle repeated batch fermentation demonstrated the enhanced stability of the immobilized yeast cells. Under continuous fermentation in an immobilized cell reactor, the maximum ethanol concentration of 84.85 g/l, and the highest ethanol yield of 0.43 g/g (of reducing sugar) were achieved at hydraulic retention time (HRT) of 3.10 h, whereas the maximum volumetric ethanol productivity of 43.54 g/l/h was observed at a HRT of 1.55 h. (orig.)

  5. Effect of Dopant Concentrations on Conversion Efficiency of SiC-Based Intermediate Band Solar Cells

    Science.gov (United States)

    Heidarzadeh, H.; Rostami, A.; Dolatyari, M.; Rostami, G.

    It was recognized that the introducing of a narrow metallic band states in the crystal structure of semiconductors make materials that they can be used as intermediate band materials for improving the power conversion efficiency of high band gap single junction solar cells. In these structures intermediate bands would serve as a "stepping stone" for photons with different energies to excite electrons from the valence to the conduction bands. Low-energy photons can be captured by this method that would pass through a conventional solar cell. An optimal IBSC (intermediate band solar cells) has a total band gap of about 1.95 eV and 3C-SiC has the closest band gap to this value (band gap of 2.2 eV). Excellent electronic properties of 3C-SiC such as high electron mobility and saturated electron drift velocity and its suitable band gap makes it an important alternative material for light harvesting technologies instead of conventional semiconductors like silicon. In this condition detailed balance analysis predicts a limiting efficiency of more than 55 % for an optimized, single junction intermediate band solar cell that it is higher than efficiency of an optimized two junction tandem solar cell. In this study we have analyzed Fe doped 3C-SiC by ab initio calculations for Fe concentration of 1.05, 1.85, 3.22, and 5.55 %. The results show conversion efficiency for designed solar cell change with altering in Fe contents. The maximum efficiency has been obtained for crystals with 3 % Fe3+ as dopant in 3C-SiC structure.

  6. Culturable associated-bacteria of the sponge Theonella swinhoei show tolerance to high arsenic concentrations

    Directory of Open Access Journals (Sweden)

    Ray eKeren

    2015-02-01

    Full Text Available Sponges are potent filter feeders and as such are exposed to high fluxes of toxic trace elements, which can accumulate in their body over time. Such is the case of the Red Sea sponge Theonella swinhoei, which has been shown to accumulate up to 8500 mg/Kg of the highly toxic element arsenic. T. swinhoei is known to harbor a multitude of sponge-associated bacteria, so it is hypothesized that the associated-bacteria will be tolerant to high arsenic concentration. This study also investigates the fate of the arsenic accumulated in the sponge to test if the associated-bacteria have an important role in the arsenic accumulation process of their host, since bacteria are key players in the natural arsenic cycle. Separation of the sponge to sponge cells and bacteria enriched fractions showed that arsenic is accumulated by the bacteria. Sponge-associated, arsenic-tolerant bacteria were cultured in the presence of 5 mM of either arsenate or arsenite (equivalent to 6150 mg/Kg arsenic, dry weight. The 54 isolated bacteria were grouped to 15 OTUs and isolates belonging to 12 OTUs were assessed for tolerance to arsenate at increased concentrations up to 100 mM. Eight of the 12 OTUs tolerated an order of magnitude increase in the concentration of arsenate, and some exhibited external biomineralization of arsenic-magnesium salts. The biomineralization of this unique mineral was directly observed in bacteria for the first time. These results may provide an explanation for the ability of the sponge to accumulate considerable amounts of arsenic. Furthermore arsenic-mineralizing bacteria can potentially be used for the study of bioremediation, as arsenic toxicity affects millions of people worldwide.

  7. Influence of particle size and concentration on the diffuse backscattering of polarized light from tissue phantoms and biological cell suspensions

    Energy Technology Data Exchange (ETDEWEB)

    Hielscher, A.H.; Mourant, J.R.; Bigio, I.J. [Los Alamos National Laboratory, Bioscience and Biotechnology, CST-4, MS E535, Los Alamos, New Mexico 87545 (United States)

    1997-01-01

    We present experimental results that show the spatial variations of the diffuse-backscattered intensity when linearly polarized light is incident upon highly scattering media. Experiments on polystyrene-sphere and Intralipid suspensions demonstrate that the radial and azimuthal variations of the observed pattern depend on the concentration, and anisotropy factor {ital g} of the particles that constitute the scattering medium. Measurements performed on biological-cell suspensions show the potential of this method for cell characterization. {copyright} 1997 Optical Society of America

  8. FRET imaging of hemoglobin concentration in Plasmodium falciparum-infected red cells.

    Directory of Open Access Journals (Sweden)

    Alessandro Esposito

    Full Text Available BACKGROUND: During its intraerythrocytic asexual reproduction cycle Plasmodium falciparum consumes up to 80% of the host cell hemoglobin, in large excess over its metabolic needs. A model of the homeostasis of falciparum-infected red blood cells suggested an explanation based on the need to reduce the colloid-osmotic pressure within the host cell to prevent its premature lysis. Critical for this hypothesis was that the hemoglobin concentration within the host cell be progressively reduced from the trophozoite stage onwards. METHODOLOGY/PRINCIPAL FINDINGS: The experiments reported here were designed to test this hypothesis by direct measurements of the hemoglobin concentration in live, infected red cells. We developed a novel, non-invasive method to quantify the hemoglobin concentration in single cells, based on Förster resonance energy transfer between hemoglobin molecules and the fluorophore calcein. Fluorescence lifetime imaging allowed the quantitative mapping of the hemoglobin concentration within the cells. The average fluorescence lifetimes of uninfected cohorts was 270+/-30 ps (mean+/-SD; N = 45. In the cytoplasm of infected cells the fluorescence lifetime of calcein ranged from 290+/-20 ps for cells with ring stage parasites to 590+/-13 ps and 1050+/-60 ps for cells with young trophozoites and late stage trophozoite/early schizonts, respectively. This was equivalent to reductions in hemoglobin concentration spanning the range from 7.3 to 2.3 mM, in line with the model predictions. An unexpected ancillary finding was the existence of a microdomain under the host cell membrane with reduced calcein quenching by hemoglobin in cells with mature trophozoite stage parasites. CONCLUSIONS/SIGNIFICANCE: The results support the predictions of the colloid-osmotic hypothesis and provide a better understanding of the homeostasis of malaria-infected red cells. In addition, they revealed the existence of a distinct peripheral microdomain in the host

  9. Suitable Concentrations of Uric Acid Can Reduce Cell Death in Models of OGD and Cerebral Ischemia-Reperfusion Injury.

    Science.gov (United States)

    Zhang, Bin; Yang, Ning; Lin, Shao-Peng; Zhang, Feng

    2017-07-01

    Cerebral infarction (CI) is a common clinical cerebrovascular disease, and to explore the pathophysiological mechanisms and seek effective treatment means are the hotspot and difficult point in medical research nowadays. Numerous studies have confirmed that uric acid plays an important role in CI, but the mechanism has not yet been clarified. When treating HT22 and BV-2 cells with different concentrations of uric acid, uric acid below 450 μM does not have significant effect on cell viability, but uric acid more than 500 μM can significantly inhibit cell viability. After establishing models of OGD (oxygen-glucose deprivation) with HT22 and BV-2 cells, uric acid at a low concentration (50 μM) cannot improve cell viability and apoptosis, and Reactive oxygen species (ROS) levels during OGD/reoxygenation; a suitable concentration (300 μM) of uric acid can significantly improve cell viability and apoptosis, and reduce ROS production during OGD/reoxygenation; but a high concentration (1000 μM) of uric acid can further reduce cell viability and enhance ROS production. After establishing middle cerebral artery occlusion of male rats with suture method, damage and increase of ROS production in brain tissue could be seen, and after adding suitable concentration of uric acid, the degree of brain damage and ROS production was reduced. Therefore, different concentrations of uric acid should have different effect, and suitable concentrations of uric acid have neuroprotective effect, and this finding may provide guidance for study on the clinical curative effect of uric acid.

  10. THE EFFECTS OF LOW CONCENTRATIONS OF ZINC ON ETOPOSIDE INDUCED HL-60 CELLS APOPTOSIS

    Institute of Scientific and Technical Information of China (English)

    盛晓阳; 沈立松; 徐翀; 吴湘如; 陈宏新; 洪照毅

    2001-01-01

    Objective Observation of the effects of lower concentrations of zinc (20~400μmol/L), which is nearby the physiological concentration, on etoposide induced HL-60 cells apoptosis. Methods Using the flow cytometry , DNA extraction, electrophoresis , and fiuoresence microscopic observation. Results We demonstrated that the low concentrations of zinc also affect cells apoptosis. If zinc was added at early time, even 200μmol/L could inhibit VP16 induced HL-60 cell apoptosis completely in 4h. But at this concentration, zinc also seems to have cell toxicity, not prolong the time of protection effect. Conclusion Zinc plays multiple roles in cellular functions and in protecting cells from exogenous deleterious factors. Zinc plays a complex, dose- and time-dependent role in apoptosis.

  11. High catechin concentrations detected in Withania somnifera (ashwagandha by high performance liquid chromatography analysis

    Directory of Open Access Journals (Sweden)

    Sulaiman Siti

    2011-08-01

    Full Text Available Abstract Background Withania somnifera is an important medicinal plant traditionally used in the treatment of many diseases. The present study was carried out to characterize the phenolic acids, flavonoids and 1,1-diphenyl-2-picrylhydrazyl radical (DPPH scavenging activities in methanolic extracts of W. somnifera fruits, roots and leaves (WSFEt, WSREt and WSLEt. Methods WSFEt, WSREt and WSLEt was prepared by using 80% aqueous methanol and total polyphenols, flavonoids as well as DPPH radical scavenging activities were determined by spectrophotometric methods and phenolic acid profiles were determined by HPLC methods. Results High concentrations of both phenolics and flavonoids were detected in all parts of the plant with the former ranging between 17.80 ± 5.80 and 32.58 ± 3.16 mg/g (dry weight and the latter ranging between 15.49 ± 1.02 and 31.58 ± 5.07 mg/g. All of the three different plant parts showed strong DPPH radical scavenging activities (59.16 ± 1.20 to 91.84 ± 0.38%. Eight polyphenols (gallic, syringic, benzoic, p-coumaric and vanillic acids as well as catechin, kaempferol and naringenin have been identified by HPLC in parts of the plant as well. Among all the polyphenols, catechin was detected in the highest concentration (13.01 ± 8.93 to 30.61 ± 11.41 mg/g. Conclusion The results indicating that W. somnifera is a plant with strong therapeutic properties thus further supporting its traditional claims. All major parts of W. somnifera such as the roots, fruits and leaves provide potential benefits for human health because of its high content of polyphenols and antioxidant activities with the leaves containing the highest amounts of polyphenols specially catechin with strong antioxidant properties.

  12. Concentration-dependent fluorescence live-cell imaging and tracking of intracellular nanoparticles

    Energy Technology Data Exchange (ETDEWEB)

    Seo, Ji Hye; Joo, Sang-Woo [Department of Chemistry, Soongsil University, Seoul 156-743 (Korea, Republic of); Cho, Keunchang [Logos Biosystems, Incorporated, Anyang 431-070 (Korea, Republic of); Lee, So Yeong, E-mail: leeso@snu.ac.kr, E-mail: sjoo@ssu.ac.kr [Laboratory of Pharmacology, College of Veterinary Medicine and Research Institute for Veterinary Science, Seoul National University, Seoul 151-742 (Korea, Republic of)

    2011-06-10

    Using live-cell imaging techniques we investigated concentration-dependent intracellular movements of fluorescence nanoparticles (NPs) in real-time after their entry into HeLa cells via incubation. Intracellular particle traces appeared to be a mixture of both random and fairly unidirectional movements of the particles. At rather low concentrations of NPs, a majority of the non-random intracellular particle trajectories are assumed to mostly go along microtubule networks after endocytosis, as evidenced from the inhibition test with nocodazole. On the other hand, as the concentrations of NPs increased, random motions were more frequently observed inside the cells.

  13. Determination of optimum sunlight concentration level in space for 3-4 cascade solar cells

    Science.gov (United States)

    Curtis, H. B.

    1982-01-01

    The optimum range of concentration in space for III-V cascade cells has been calculated using a realistic solar cell diode equation. Temperature was varied with concentration using several models and ranged from 55 deg at one sun to between 80 deg and 200 deg C at 100 suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that the maximum efficiency of 30 percent occurs in the 50 to 100 X sun concentration range provided series resistance is below 0.015 ohm sq cm and cell temperature is about 80 C at 100 suns.

  14. Determination of optimum sunlight concentration level in space for 3-5 cascade solar cells

    Science.gov (United States)

    Curtis, H. B.

    1982-01-01

    The optimum range of concentration levels in space for III-V cascade cells was calculated using a realistic solar cell diode equation. Temperature was varied with concentration using several models and ranged from 55 C at 1 sun to between 80 and 200 C at 100 suns. A variety of series resistance and internal resistances were used. Coefficients of the diffusion and recombination terms are strongly temperature dependent. The study indicates that the maximum efficiency of 30 percent occurs in the 50 to 100 sun concentration range provided series resistance is below 0.015 ohm-sq cm and cell temperature is about 80 C at 100 suns.

  15. The effect of low concentrations of ethanol on gastric adenocarcinoma cell lines

    Directory of Open Access Journals (Sweden)

    Wu Lingjiao

    2013-01-01

    Full Text Available Chronic alcohol consumption was identified as a significant risk factor for cancer in humans. The aim of the study was to analyze the influence of low concentrations of ethanol on gastric adenocarcinoma cell viability, apoptosis, and changes in the expression of alcohol dehydrogenase with ethanol treatment. Gastric adenocarcinoma cell lines (MGC803, MGC823 and SGC7901 were treated with different concentrations of ethanol (0.03125%, 0.0625%, 0.125%, 0.25%, 0.5%, 1%, 2%, and 4%. The MTT (3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide assay and flow cytometry were used to analyze the effect of ethanol treatment on cell viability and apoptosis. Western blotting was used to analyze the expression of alcohol dehydrogenase in gastric carcinoma cells. Ethanol treatment inhibited cell proliferation in gastric adenocarcinoma cell lines in a significant dose-dependent manner. Ethanol induced apoptosis of gastric adenocarcinoma cells in a dose-dependent manner. The alcohol dehydrogenase activity of gastric adenocarcinoma cells increased with the increase in the concentration of ethanol. Ethanol inhibited cell viability and the growth of gastric adenocarcinoma cell lines. Low concentrations of ethanol also induced apoptosis and increased the expression of alcohol dehydrogenase of the gastric adenocarcinoma cell lines.

  16. The effect of low concentrations of ethanol on gastric adenocarcinoma cell lines

    Directory of Open Access Journals (Sweden)

    Wu Lingjiao

    2014-01-01

    Full Text Available Chronic alcohol consumption has been identified as a significant risk factor for cancer in humans. The aim of the study was to analyze the influence of low concentrations of ethanol on gastric adenocarcinoma cell viability, apoptosis, and changes in the expression of alcohol dehydrogenase with ethanol treatment. Gastric adenocarcinoma cell lines (MGC803, MGC823 and SGC7901 were treated with different concentrations of ethanol (0.03125%, 0.0625%, 0.125%, 0.25%, 0.5%, 1%, 2%, and 4%. An MTT (3-(4,5-dimethylthiazol-2-yl-2,5-diphenyltetrazolium bromide assay and flow cytometry were used to analyze the effect of ethanol treatment on cell viability and apoptosis. Western blotting was used to analyze the expression of alcohol dehydrogenase in gastric carcinoma cells. Ethanol treatment inhibited cell proliferation in gastric adenocarcinoma cell lines in a significant dose-dependent manner. Ethanol was also able to induce the apoptosis of gastric adenocarcinoma cells in a dose-dependent manner. Alcohol dehydrogenase activity of gastric adenocarcinoma cells increased with the increase in the concentration of ethanol. Ethanol inhibited cell viability and growth of gastric adenocarcinoma cell lines. Low concentrations of ethanol also induced apoptosis and increased the expression of alcohol dehydrogenase of the gastric adenocarcinoma cell lines.

  17. How do yeast cells become tolerant to high ethanol concentrations?

    DEFF Research Database (Denmark)

    Snoek, Tim; Verstrepen, Kevin J.; Voordeckers, Karin

    2016-01-01

    The brewer’s yeast Saccharomyces cerevisiae displays a much higher ethanol tolerance compared to most other organisms, and it is therefore commonly used for the industrial production of bioethanol and alcoholic beverages. However, the genetic determinants underlying this yeast’s exceptional ethanol...... tolerance have proven difficult to elucidate. In this perspective, we discuss how different types of experiments have contributed to our understanding of the toxic effects of ethanol and the mechanisms and complex genetics underlying ethanol tolerance. In a second part, we summarize the different routes...... and challenges involved in obtaining superior industrial yeasts with improved ethanol tolerance....

  18. A comparative study on the transplantation of different concentrations of human umbilical mesenchymal cells into diabetic rats

    Institute of Scientific and Technical Information of China (English)

    Jia-Hui; Kong; Dan; Zheng; Song; Chen; Hong-Tao; Duan; Yue-Xin; Wang; Meng; Dong; Jian; Song

    2015-01-01

    AIM: To observe the effects of intravitreal injections of different concentrations of human umbilical mesenchymal stem cells on retinopathy in rats with diabetes mellitus.METHODS: Healthy and adult male Sprague-Dawley(SD) rats were randomly assigned to a normal control group(group A), a diabetic retinopathy(DR) blank control group(group B), a high-concentration transplantation group(group C), a low-concentration transplantation group(group D) and a placebo transplantation group(group E). The expression of nerve growth factor(NGF)protein in the retinal layers was detected by immunohistochemical staining at 2, 4, 6 and 8wk.RESULTS: The expression of NGF was positive in group A and most positive in the retinal ganglion cell layer. In groups B and E, the expression of NGF was positive 2wk after transplantation and showed an increase in all layers. However, the level of expression had decreased in all layers at 4wk and was significantly reduced at 8wk. In groups C and D, the expression of NGF had increased at 2wk and continued to increase up to 8wk. The level of expression in group C was much higher than that in group D.CONCLUSION: DR can be improved by intravitreal injection of human umbilical mesenchymal stem cells.High concentrations of human umbilical mesenchymal stem cells confer a better protective effect on DR than low concentrations.

  19. Unexpectedly high ultrafine aerosol concentrations above East Antarctic sea-ice

    Directory of Open Access Journals (Sweden)

    R. S. Humphries

    2015-10-01

    Full Text Available The effect of aerosols on clouds and their radiative properties is one of the largest uncertainties in our understanding of radiative forcing. A recent study has concluded that better characterisation of pristine, natural aerosol processes leads to the largest reduction in these uncertainties. Antarctica, being far from anthropogenic activities, is an ideal location for the study of natural aerosol processes. Aerosol measurements in Antarctica are often limited to boundary layer air-masses at spatially sparse coastal and continental research stations, with only a handful of studies in the sea ice region. In this paper, the first observational study of sub-micron aerosols in the East Antarctic sea ice region is presented. Measurements were conducted aboard the ice-breaker Aurora Australis in spring 2012 and found that boundary layer condensation nuclei (CN3 concentrations exhibited a five-fold increase moving across the Polar Front, with mean Polar Cell concentrations of 1130 cm−3 – higher than any observed elsewhere in the Antarctic and Southern Ocean region. The absence of evidence for aerosol growth suggested that nucleation was unlikely to be local. Air parcel trajectories indicated significant influence from the free troposphere above the Antarctic continent, implicating this as the likely nucleation region for surface aerosol, a similar conclusion to previous Antarctic aerosol studies. The highest aerosol concentrations were found to correlate with low pressure systems, suggesting that the passage of cyclones provided an accelerated pathway, delivering air-masses quickly from the free-troposphere to the surface. After descent from the Antarctic free troposphere, trajectories suggest that sea ice boundary layer air-masses travelled equator-ward into the low albedo Southern Ocean region, transporting with them emissions and these aerosol nuclei where, after growth, may potentially impact on the region's radiative balance. The high aerosol

  20. Analytical Modelling of High Concentrator Photovoltaic Modules Based on Atmospheric Parameters

    Directory of Open Access Journals (Sweden)

    Eduardo F. Fernández

    2015-01-01

    Full Text Available The goal of this paper is to introduce a model to predict the maximum power of a high concentrator photovoltaic module. The model is based on simple mathematical expressions and atmospheric parameters. The maximum power of a HCPV module is estimated as a function of direct normal irradiance, cell temperature, and two spectral corrections based on air mass and aerosol optical depth. In order to check the quality of the model, a HCPV module was measured during one year at a wide range of operating conditions. The new proposed model shows an adequate match between actual and estimated data with a root mean square error (RMSE of 2.67%, a mean absolute error (MAE of 4.23 W, a mean bias error (MBE of around 0%, and a determination coefficient (R2 of 0.99.

  1. Technological condition in slurry electrolysis of high-silver galena concentrate

    Institute of Scientific and Technical Information of China (English)

    陈凌; 杨显万; 司云森; 张英杰

    2002-01-01

    Effects of various technological conditions such as ρ (Cl-),ρ (Fe)T,pH value and temperature on the cell voltage,lead leaching rate and the cathodic current efficiency of the slurry electrolysis of high-silver galena concentrate were studied,and the behavior regularity of lead and silver was investigated.As a result,the suitable condition was determined as: ρ (Cl-) 230 g/L,ρ (Fe)T 15 g/L,pH 1,temperature 70 ℃,electrolysis time 6 h.Under such condition,adopting the cathodic current density of 150 A/m2 and the liquid-solid ratio of 15∶1,lead powder with a purity degree of 91.18% was got.At the same time,leaching rate of lead,leaching rate of silver and cathodic current efficiency amounted to 96.88%,70.88% and 75.68% respectively.

  2. Lateral current effects on the voltage distribution in the emitter of solar cells under concentrated sunlight

    Energy Technology Data Exchange (ETDEWEB)

    Morales-Acevedo, Arturo [CINVESTAV-IPN, Electrical Engineering Department, Avenida IPN No. 2508, 07360 Mexico, DF (Mexico)

    2009-04-15

    The design of the grid contact in silicon solar cells is one of the most important steps for the optimization and fabrication of these energy conversion devices. The voltage drop due to the lateral flow of current towards the grid fingers can be a limiting factor causing the reduction of conversion efficiency. For low current levels this voltage drop can be made small, for typical values of sheet resistance in the emitter, but for solar cells made to operate at high sun concentrations this efficiency loss can be important, unless there is a clear vision of the current and voltage distribution so that the emitter and grid design can be improved. Hence, it is important to establish and solve the current and voltage distribution equations for solar cells with a grid contact. In this work, first these equations are established and then they are solved in order to show the effects that the lateral current flow in the emitter cause on the voltage distribution, particularly at high illumination levels. In addition, it will be shown that the open circuit voltage is significantly reduced due to the lateral current flow as compared to the value predicted from a simple equivalent circuit with a lumped resistance model. (author)

  3. Aged mice have increased inflammatory monocyte concentration and altered expression of cell-surface functional receptors

    Indian Academy of Sciences (India)

    Kelley Strohacker; Whitney L Breslin; Katie C Carpenter; Brian K McFarlin

    2012-03-01

    The expression of monocyte cell-surface receptors represents one index of immune dysfunction, which is common with aging. Although mouse models of aging are prevalent, monocyte subset assessment is rare. Our purpose was to compare cell receptor expression on classic (CD115+/Gr-1high) and non-classic (CD115+/Gr-1low) monocytes from 80- or 20-week-old CD-1 mice. Three-colour flow cytometry was used to determine the concentration of monocyte subsets and their respective cell-surface expression of TLR2, TLR4, CD80, CD86, MHC II and CD54. These receptors were selected because they have been previously associated with altered monocyte function. Data were analysed with independent -tests; significance was set at < 0.05. Old mice had a greater concentration of both classic (258%, =0.003) and non-classic (70%, =0.026) monocytes. The classic : non-classic monocyte ratio doubled in old as compared with that in young mice (=0.006), indicating a pro-inflammatory shift. TLR4 ($\\downarrow$27%, =0.001) and CD80 ($\\downarrow$37%, =0.004) were decreased on classic monocytes from old as compared with those from young mice. TLR2 ($\\uparrow$24%, =0.002) and MHCII ($\\downarrow$21%, =0.026) were altered on non-classic monocytes from old as compared with those from young mice. The increased classic : non-classic monocyte ratio combined with changes in the cell-surface receptor expression on both monocyte subsets is indicative of immune dysfunction, which may increase age-associated disease risk.

  4. High-Efficiency Solar Thermal Vacuum Demonstration Completed for Refractive Secondary Concentrator

    Science.gov (United States)

    Wong, Wayne A.

    2001-01-01

    Common to many of the space applications that utilize solar thermal energy--such as electric power conversion, thermal propulsion, and furnaces--is a need for highly efficient, solar concentration systems. An effort is underway at the NASA Glenn Research Center to develop the refractive secondary concentrator, which uses refraction and total internal reflection to efficiently concentrate and direct solar energy. When used in combination with advanced lightweight primary concentrators, the refractive secondary concentrator enables very high system concentration ratios (10,000 to 1) and very high temperatures (>2000 K). The innovative refractive secondary concentrator offers significant advantages over all other types of secondary concentrators. The refractive secondary offers the highest throughput efficiency, provides for flux tailoring, requires no active cooling, relaxes the pointing and tracking requirements of the primary concentrator, and enables very high system concentration ratios. This technology has broad applicability to any system that requires the conversion of solar energy to heat. Glenn initiated the development of the refractive secondary concentrator in support of Shooting Star, a solar thermal propulsion flight experiment, and continued the development in support of Space Solar Power.

  5. G eobacter sp. SD-1 with enhanced electrochemical activity in high-salt concentration solutions

    KAUST Repository

    Sun, Dan

    2014-07-16

    © 2014 Society for Applied Microbiology and John Wiley & Sons Ltd. Summary: An isolate, designated strain SD-1, was obtained from a biofilm dominated by Geobacter sulfurreducens in a microbial fuel cell. The electrochemical activity of strain SD-1 was compared with type strains, G.sulfurreducensPCA and Geobacter metallireducensGS-15, and a mixed culture in microbial electrolysis cells. SD-1 produced a maximum current density of 290±29Am-3 in a high-concentration phosphate buffer solution (PBS-H, 200mM). This current density was significantly higher than that produced by the mixed culture (189±44Am-3) or the type strains (<70Am-3). In a highly saline water (SW; 50mM PBS and 650mM NaCl), current by SD-1 (158±4Am-3) was reduced by 28% compared with 50mM PBS (220±4Am-3), but it was still higher than that of the mixed culture (147±19Am-3), and strains PCA and GS-15 did not produce any current. Electrochemical tests showed that the improved performance of SD-1 was due to its lower charge transfer resistance and more negative potentials produced at higher current densities. These results show that the electrochemical activity of SD-1 was significantly different than other Geobacter strains and mixed cultures in terms of its salt tolerance.

  6. Potential high efficiency solar cells: Applications from space photovoltaic research

    Science.gov (United States)

    Flood, D. J.

    1986-01-01

    NASA involvement in photovoltaic energy conversion research development and applications spans over two decades of continuous progress. Solar cell research and development programs conducted by the Lewis Research Center's Photovoltaic Branch have produced a sound technology base not only for the space program, but for terrestrial applications as well. The fundamental goals which have guided the NASA photovoltaic program are to improve the efficiency and lifetime, and to reduce the mass and cost of photovoltaic energy conversion devices and arrays for use in space. The major efforts in the current Lewis program are on high efficiency, single crystal GaAs planar and concentrator cells, radiation hard InP cells, and superlattice solar cells. A brief historical perspective of accomplishments in high efficiency space solar cells will be given, and current work in all of the above categories will be described. The applicability of space cell research and technology to terrestrial photovoltaics will be discussed.

  7. Growth, morphology, ammonium uptake and nutrient allocation of Myriophyllum brasiliense Cambess. under high NH₄⁺ concentrations.

    Science.gov (United States)

    Saunkaew, Piyanart; Wangpakapattanawong, Prasit; Jampeetong, Arunothai

    2011-11-01

    The effects of high NH(4)(+) concentration on growth, morphology, NH(4) (+) uptake and nutrient allocation of Myriophyllum brasiliense were investigated in hydroponic culture. The plants were grown under greenhouse conditions for 4 weeks using four levels of NH(4)(+) concentration: 1, 5, 10 and 15 mM. M. brasiliense grew well with a relative growth rate of c.0.03 day(-1) at NH(4)(+) concentration up to 5 mM. At the higher NH(4)(+) concentrations the growth of the plants was stunted and the plants had short roots and few new buds, especially when grown in 15 mM NH(4)(+) where the submerged leaves were lost and there were rotten roots and submerged stems. To avoid NH(4)(+) toxicity, the plants may have a mechanism to prevent cytoplasmic NH(4)(+) accumulation in plant cells. The net uptake of NH(4)(+) significantly decreased and the total N significantly increased in the plants treated with 10 and 15 mM NH(4)(+), respectively. The plant may employ NH(4)(+) assimilation and extrusion as a mechanism to compensate for the high NH(4)(+) concentrations. However, the plants may show nutrient deficiency symptoms, especially K deficiency symptoms, after they were exposed to NH(4)(+) concentration higher than 10 mM. The present study provides a basic ecophysiology of M. brasiliense that it can grow in NH(4)(+) enriched water up to concentrations as high as 5 mM.

  8. Analyzing free zinc(II) ion concentrations in cell biology with fluorescent chelating molecules.

    Science.gov (United States)

    Maret, Wolfgang

    2015-02-01

    concentrations in subcellular compartments. Applying the extensive toolbox of available probes/sensors in biological systems requires an understanding of the principles of cellular zinc homeostasis and the chemical biology of the probes and sensors. Regardless of limitations in specificity (for a particular metal ion), selectivity (for a particular metal pool), and sensitivity (detection limit), the technology is making remarkable contributions to imaging zinc with high spatiotemporal resolution in single cells and to defining the biochemical functions of zinc ions in cellular regulation.

  9. Artocarpin Induces Apoptosis in Human Cutaneous Squamous Cell Carcinoma HSC-1 Cells and Its Cytotoxic Activity Is Dependent on Protein-Nutrient Concentration

    Directory of Open Access Journals (Sweden)

    Stephen Chu-Sung Hu

    2015-01-01

    Full Text Available Artocarpin, a natural prenylated flavonoid, has been shown to have various biological properties. However, its effects on human cutaneous squamous cell carcinoma (SCC have not been previously investigated. We set out to determine whether artocarpin has cytotoxic effects on SCC cells and whether its pharmacological activity is dependent on protein-nutrient concentration. Our results showed that treatment of HSC-1 cells (a human cutaneous SCC cell line with artocarpin decreased cell viability and induced cell apoptosis by increasing caspase 3/7 activity. These effects were more pronounced at low fetal bovine serum (FBS concentrations. Artocarpin induced an increase in the level of phospho-p38 and a decrease in the levels of phospho-ERK, phospho-JNK, phospho-Akt, phospho-mTOR, and phospho-S6K. High FBS concentrations in the culture media inhibited and delayed the uptake of artocarpin from the extracellular compartment (culture media into the intracellular compartment, as determined by high performance liquid chromatography (HPLC analysis. In conclusion, artocarpin induces apoptosis in HSC-1 cells through modulation of MAPK and Akt/mTOR pathways. Binding of artocarpin to proteins in the FBS may inhibit cellular uptake and reduce the cytotoxic activity of artocarpin on HSC-1 cells. Therefore, artocarpin may have potential use in the future as a form of treatment for cutaneous SCC.

  10. Electrochemical treatment of reverse osmosis concentrate on boron-doped electrodes in undivided and divided cell configurations

    Energy Technology Data Exchange (ETDEWEB)

    Bagastyo, Arseto Y. [Advanced Water Management Centre, The University of Queensland, St Lucia, QLD 4072 (Australia); Department of Environmental Engineering, Institut Teknologi Sepuluh Nopember, Surabaya 60111 (Indonesia); Batstone, Damien J. [Advanced Water Management Centre, The University of Queensland, St Lucia, QLD 4072 (Australia); Kristiana, Ina [Curtin Water Quality Research Centre, Resources and Chemistry Precinct, Department of Chemistry, Curtin University, Bentley, Perth, WA 6102 (Australia); Escher, Beate I. [National Research Centre for Environmental Toxicology (Entox), The University of Queensland, Brisbane, QLD 4108 (Australia); Joll, Cynthia [Curtin Water Quality Research Centre, Resources and Chemistry Precinct, Department of Chemistry, Curtin University, Bentley, Perth, WA 6102 (Australia); Radjenovic, Jelena, E-mail: j.radjenovic@uq.edu.au [Advanced Water Management Centre, The University of Queensland, St Lucia, QLD 4072 (Australia)

    2014-08-30

    Highlights: • 100% of COD and ∼70% of DOC was removed in both cell configurations. • ∼21.7 mg L{sup −1} of AOCl and ∼2.3 mg L{sup −1} of AOBr was formed regardless of the membrane use. • The TEQ was far lower than expected given the high AOCl concentrations. • The undivided cell consumed lower energy compared to the divided cell. - Abstract: An undivided electrolytic cell may offer lower electrochlorination through reduction of chlorine/hypochlorite at the cathode. This study investigated the performance of electrooxidation of reverse osmosis concentrate using boron-doped diamond electrodes in membrane-divided and undivided cells. In both cell configurations, similar extents of chemical oxygen demand and dissolved organic carbon removal were obtained. Continuous formation of chlorinated organic compounds was observed regardless of the membrane presence. However, halogenation of the organic matter did not result in a corresponding increase in toxicity (Vibrio fischeri bioassay performed on extracted samples), with toxicity decreasing slightly until 10 Ah L{sup −1}, and generally remaining near the initial baseline-toxicity equivalent concentration (TEQ) of the raw concentrate (i.e., ∼2 mg L{sup −1}). The exception was a high range toxicity measure in the undivided cell (i.e., TEQ = 11 mg L{sup −1} at 2.4 Ah L{sup −1}), which rapidly decreased to 4 mg L{sup −1}. The discrepancy between the halogenated organic matter and toxicity patterns may be a consequence of volatile and/or polar halogenated by-products formed in oxidation by OH· electrogenerated at the anode. The undivided cell exhibited lower energy compared to the divided cell, 0.25 kWh gCOD{sup −1} and 0.34 kWh gCOD{sup −1}, respectively, yet it did not demonstrate any improvement regarding by-products formation.

  11. Concentration characteristics and cell arrangement in luminescent concentrator PV modules; Keiko shukogata taiyo denchi module no cell haichi to shuko tokusei

    Energy Technology Data Exchange (ETDEWEB)

    Inamura, A. [Science University of Tokyo, Tokyo (Japan); Sakuta, K. [Electrotechnical Laboratory, Tsukuba (Japan)

    1997-11-25

    A luminescent concentrator PV module requires no tracking equipment and can use scattered light. A mini PV module was prepared from a luminescent plate of 100times100times3mm, and a single-crystalline PV cell of 100times20mm. Characteristics of various prototype modules with different PV cell areas and cell arrangements were also measured. Four kinds of edge reflecting materials with different reflectances by various white coating were applied to Al sashes for module frames, and each sash was fixed on one edge of the luminescent plate. In experiment, 3 other edges were covered with black tapes to reduce each reflectance to 0%. Although PV module output was affected by reflectance of edges, the output was satisfactory at 90% or more in reflectance showing no difference in output. A concentrating efficiency decreased with an increase in luminescent plate (concentrator) area, while it was improved by cell arrangement with short optical pass length, and cell arrangement hardly affected by edge reflection. 4 refs., 7 figs.

  12. Millisecond single-molecule localization microscopy combined with convolution analysis and automated image segmentation to determine protein concentrations in complexly structured, functional cells, one cell at a time.

    Science.gov (United States)

    Wollman, Adam J M; Leake, Mark C

    2015-01-01

    We present a single-molecule tool called the CoPro (concentration of proteins) method that uses millisecond imaging with convolution analysis, automated image segmentation and super-resolution localization microscopy to generate robust estimates for protein concentration in different compartments of single living cells, validated using realistic simulations of complex multiple compartment cell types. We demonstrate its utility experimentally on model Escherichia coli bacteria and Saccharomyces cerevisiae budding yeast cells, and use it to address the biological question of how signals are transduced in cells. Cells in all domains of life dynamically sense their environment through signal transduction mechanisms, many involving gene regulation. The glucose sensing mechanism of S. cerevisiae is a model system for studying gene regulatory signal transduction. It uses the multi-copy expression inhibitor of the GAL gene family, Mig1, to repress unwanted genes in the presence of elevated extracellular glucose concentrations. We fluorescently labelled Mig1 molecules with green fluorescent protein (GFP) via chromosomal integration at physiological expression levels in living S. cerevisiae cells, in addition to the RNA polymerase protein Nrd1 with the fluorescent protein reporter mCherry. Using CoPro we make quantitative estimates of Mig1 and Nrd1 protein concentrations in the cytoplasm and nucleus compartments on a cell-by-cell basis under physiological conditions. These estimates indicate a ∼4-fold shift towards higher values in the concentration of diffusive Mig1 in the nucleus if the external glucose concentration is raised, whereas equivalent levels in the cytoplasm shift to smaller values with a relative change an order of magnitude smaller. This compares with Nrd1 which is not involved directly in glucose sensing, and which is almost exclusively localized in the nucleus under high and low external glucose levels. CoPro facilitates time-resolved quantification of

  13. Reduced Seminal Concentration of CD45pos Cells after Follicle-Stimulating Hormone Treatment in Selected Patients with Idiopathic Oligoasthenoteratozoospermia

    Directory of Open Access Journals (Sweden)

    Rosita A. Condorelli

    2014-01-01

    Full Text Available The present study evaluated the conventional sperm parameters and the seminal concentration of CD45pos cells (pan-leukocyte marker of infertile patients with idiopathic oligoasthenoteratozoospermia (OAT. The patients were arbitrarily divided into three groups treated with recombinant follicle-stimulating hormone FSH: α (Group A = 20 patients, recombinant FSH-β (Group B = 20 patients, and highly purified human FSH (Group C = 14 patients. All treated groups achieved a similar improvement of the main sperm parameters (density, progressive motility, and morphology, but only the increase in the percentage of spermatozoa with normal morphology was significant compared to the baseline in all three examined groups. Moreover, all groups had a significant reduction of the seminal concentration of CD45pos cells and of the percentage of immature germ cells. Before and after the treatment, the concentration of CD45pos cells showed a positive linear correlation with the percentage of immature germ cells and a negative correlation with the percentage of spermatozoa with regular morphology. These results demonstrate that treatment with FSH is effective in patients with idiopathic OAT and that there are no significant differences between the different preparations. The novelty of this study is in the significant reduction of the concentration of CD45pos cells observed after the treatment.

  14. Preservation media, durations and cell concentrations of short-term storage affect key features of human adipose-derived mesenchymal stem cells for therapeutic application

    Directory of Open Access Journals (Sweden)

    Fengli Zhang

    2017-05-01

    Full Text Available Background Adipose-derived mesenchymal stem cells (ADSCs have shown great potential in the treatment of various diseases. However, the optimum short-term storage condition of ADSCs in 2∼8 °C is rarely reported. This study aimed at optimizing a short-term storage condition to ensure the viability and function of ADSCs before transplantation. Methods Preservation media and durations of storage were evaluated by cell viability, apoptosis, adhesion ability and colony-forming unit (CFU capacity of ADSCs. The abilities of cell proliferation and differentiation were used to optimize cell concentrations. Optimized preservation condition was evaluated by cell surface markers, cell cycle and immunosuppressive capacity. Results A total of 5% human serum albumin in multiple electrolytes (ME + HSA was the optimized medium with high cell viability, low cluster rate, good adhesion ability and high CFU capacity of ADSCs. Duration of storage should be limited to 24 h to ensure the quality of ADSCs before transplantation. A concentration of 5 × 106 cells/ml was the most suitable cell concentration with low late stage apoptosis, rapid proliferation and good osteogenic and adipogenic differentiation ability. This selected condition did not change surface markers, cell cycle, indoleamine 2, 3-dioxygenase 1 (IDO1 gene expression and kynurenine (Kyn concentration significantly. Discussion In this study, ME + HSA was found to be the best medium, most likely due to the supplement of HSA which could protect cells, the physiological pH (7.4 of ME and sodium gluconate ingredient in ME which could provide energy for cells. Duration should be limited to 24 h because of reduced nutrient supply and increased waste and lactic acid accumulation during prolonged storage. To keep cell proliferation and limit lactic acid accumulation, the proper cell concentration is 5× 106 cells/ml. Surface markers, cell cycle and immunosuppressive capacity did not change significantly

  15. Bone marrow concentrate for autologous transplantation in minipigs. Characterization and osteogenic potential of mesenchymal stem cells.

    Science.gov (United States)

    Herten, M; Grassmann, J P; Sager, M; Benga, L; Fischer, J C; Jäger, M; Betsch, M; Wild, M; Hakimi, M; Jungbluth, P

    2013-01-01

    Autologous bone marrow plays an increasing role in the treatment of bone, cartilage and tendon healing disorders. Cell-based therapies display promising results in the support of local regeneration, especially therapies using intra-operative one-step treatments with autologous progenitor cells. In the present study, bone marrow-derived cells were concentrated in a point-of-care device and investigated for their mesenchymal stem cell (MSC) characteristics and their osteogenic potential. Bone marrow was harvested from the iliac crest of 16 minipigs. The mononucleated cells (MNC) were concentrated by gradient density centrifugation, cultivated, characterized by flow cytometry and stimulated into osteoblasts, adipocytes, and chondrocytes. Cell differentiation was investigated by histological and immunohistological staining of relevant lineage markers. The proliferation capacity was determined via colony forming units of fibroblast and of osteogenic alkaline-phosphatase-positive-cells. The MNC could be enriched 3.5-fold in nucleated cell concentrate in comparison to bone marrow. Flow cytometry analysis revealed a positive signal for the MSC markers. Cells could be differentiated into the three lines confirming the MSC character. The cellular osteogenic potential correlated significantly with the percentage of newly formed bone in vivo in a porcine metaphyseal long-bone defect model. This study demonstrates that bone marrow concentrate from minipigs display cells with MSC character and their osteogenic differentiation potential can be used for osseous defect repair in autologous transplantations.

  16. Low-cost photovoltaics: Luminescent solar concentrators and colloidal quantum dot solar cells

    Science.gov (United States)

    Leow, Shin Woei

    Solar energy has long been lauded as an inexhaustible fuel source with more energy reaching the earth's surface in one hour than the global consumption for a year. Although capable of satisfying the world's energy requirements, solar energy remains an expensive technology that has yet to attain grid parity. Another drawback is that existing solar farms require large quantities of land in order to generate power at useful rates. In this work, we look to luminescent solar concentrator systems and quantum dot technology as viable solutions to lowering the cost of solar electricity production with the flexibility to integrate such technologies into buildings to achieve dual land use. Luminescent solar concentrator (LSC) windows with front-facing photovoltaic (PV) cells were built and their gain and power efficiency were investigated. Conventional LSCs employ a photovoltaic (PV) cell that is placed on the edge of the LSC, facing inward. This work describes a new design with the PV cells on the front-face allowing them to receive both direct solar irradiation and wave-guided photons emitted from a dye embedded in an acrylic sheet, which is optically coupled to the PV cells. Parameters investigated include the thickness of the waveguide, edge treatment of the window, cell width, and cell placement. The data allowed us to make projections that aided in designing windows for maximized overall efficiency. A gain in power of 2.2x over the PV cells alone was obtained with PV cell coverage of 5%, and a power conversion efficiency as high as 6.8% was obtained with a PV cell coverage of 31%. Balancing the trade-offs between gain and efficiency, the design with the lowest cost per watt attained a power efficiency of 3.8% and a gain of 1.6x. With the viability of the LSC demonstrated, a weighted Monte-Carlo Ray Tracing program was developed to study the transport of photons and loss mechanisms in the LSC to aid in design optimization. The program imports measured absorption

  17. Low-Cost High-Concentration Photovoltaic Systems for Utility Power Generation

    Energy Technology Data Exchange (ETDEWEB)

    McConnell, R.; Garboushian, V.; Gordon, R.; Dutra, D.; Kinsey, G.; Geer, S.; Gomez, H.; Cameron, C.

    2012-03-31

    Under DOE's Technology Pathway Partnership (TPP) program, Amonix, Inc. developed a new generation of high-concentration photovoltaic systems using multijunction technology and established the manufacturing capacity needed to supply multi-megawatt power plants buing using the new Amonix 7700-series solar energy systems. For this effort, Amonix Collaborated with a variety of suppliers and partners to complete project tasks. Subcontractors included: Evonik/Cyro; Hitek; the National Renewable Energy Laboratory (NREL); Raytech; Spectrolab; UL; University of Nevada, Las Vegas; and TUV Rheinland PTL. The Amonix TPP tasks included: Task 1: Multijunction Cell Optimization for Field Operation, Task 2: Fresnel Lens R&D, Task 3: Cell Package Design & Production, Task 4: Standards Compliance and Reliability Testing, Task 5: Receiver Plate Production, Task 6: MegaModule Performance, Task 7: MegaModule Cost Reduction, Task 8: Factory Setup and MegaModule Production, Task 9: Tracker and Tracking Controller, Task 10: Installation and Balance of System (BOS), Task 11: Field Testing, and Task 12: Solar Advisor Modeling and Market Analysis. Amonix's TPP addressed nearly the complete PV value chain from epitaxial layer design and wafer processing through system design, manufacturing, deployment and O&M. Amonix has made progress toward achieving these reduced costs through the development of its 28%+ efficient MegaModule, reduced manufacturing and installation cost through design for manufacturing and assembly, automated manufacturing processes, and reduced O&M costs. Program highlights include: (1) Optimized multijunction cell and cell package design to improve performance by > 10%; (2) Updated lens design provided 7% increased performance and higher concentration; (3) 28.7% DC STC MegaModule efficiency achieved in Phase II exceeded Phase III performance goal; (4) New 16' focal length MegaModule achieved target materials and manufacturing cost reduction; (5) Designed and

  18. Increasing Fuel Efficiency of Direct Methanol Fuel Cell Systems with Feedforward Control of the Operating Concentration

    Directory of Open Access Journals (Sweden)

    Youngseung Na

    2015-09-01

    Full Text Available Most of the R&D on fuel cells for portable applications concentrates on increasing efficiencies and energy densities to compete with other energy storage devices, especially batteries. To improve the efficiency of direct methanol fuel cell (DMFC systems, several modifications to system layouts and operating strategies are considered in this paper, rather than modifications to the fuel cell itself. Two modified DMFC systems are presented, one with an additional inline mixer and a further modification of it with a separate tank to recover condensed water. The set point for methanol concentration control in the solution is determined by fuel efficiency and varies with the current and other process variables. Feedforward concentration control enables variable concentration for dynamic loads. Simulation results were validated experimentally with fuel cell systems.

  19. Red cell concentrates of hemochromatosis patients comply with the storage guidelines for transfusion purposes.

    NARCIS (Netherlands)

    Luten, M.; Roerdinkholder-Stoelwinder, B.; Rombout-Sestrienkova, E.; Grip, W.J. de; Bos, H.J.; Bosman, G.J.C.G.M.

    2008-01-01

    BACKGROUND: Therapeutic phlebotomy is the preferred treatment for iron overload associated with hemochromatosis. In the Netherlands, red blood cell concentrates (RCCs) from hemochromatosis patients are not used for transfusion purposes. In this study, their storage performance was compared with that

  20. Red cell concentrates of hemochromatosis patients comply with the storage guidelines for transfusion purposes.

    NARCIS (Netherlands)

    Luten, M.; Roerdinkholder-Stoelwinder, B.; Rombout-Sestrienkova, E.; Grip, W.J. de; Bos, H.J.; Bosman, G.J.C.G.M.

    2008-01-01

    BACKGROUND: Therapeutic phlebotomy is the preferred treatment for iron overload associated with hemochromatosis. In the Netherlands, red blood cell concentrates (RCCs) from hemochromatosis patients are not used for transfusion purposes. In this study, their storage performance was compared with that

  1. A method for the control of alumina concentration in aluminum reduction cells

    Directory of Open Access Journals (Sweden)

    Jens G. Balchen

    1992-01-01

    Full Text Available The paper presents a new method for the control of the concentration of the alumina in electrolysis cells for the production of aluminium. The method is based upon the well known fact that apparent resistivity of the cell is a function of the alumina concentration so that the resistivity has the lowest value around the concentration of three per cent and increases in both directions. The method uses the cross correlation between a perturbation of the feed flow of alumina into the cell and the resulting response in measured voltage across the cell. The cross-correlation is proportional to the slope of the resistivity against concentration curve, making it possible to control the alumina flow, to achieve a desired slope. The method has much in common with other methods presently in use which require a much more complicated computation scheme.

  2. Effects of nitrogen ion implantation on Ca2+ concentration and membrane potential of pollen cell

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    The effects of low energy nitrogen ion implantation on Ca2+ concentration and membrane potential of lily (lilium davidii Duch) pollen cell have been studied. The results showed that the Ca2+ concentration was increased when pollen grain was implanted by nitrogen ion with energy 100keV and dose 1013 ions/cra2. However, the increase of Ca2+ concentration was partly inhibited by the addition of Ca2+channel inhibitor depending on dose. And nitrogen ion implantation caused depolarization of pollen cell membrane potential. In other words, membrane potential was increased,but the effect decreased by adding Ca2+ channel inhibitor.However, it was still significantly higher than the membrane potential of control cells. It was indicated that the depolarization of cell membrane potential opened the calcium channel on the membrane that caused the increasing of intraceilular calcium concentration. This might be an earlier step of the effect of low energy nitrogen ion implantation on pollen germination.

  3. High Efficiency Polymer Solar Cells Technologies

    Institute of Scientific and Technical Information of China (English)

    Abdrhman M G; LI Hang-quan; ZHANG Li-ye; ZHOU Bing

    2006-01-01

    The conjugated polymer-based solar cell is one of the most promising devices in search of sustainable, renewable energy sources in last decade. It is the youngest field in organic solar cell research and also is certainly the fastest growing one at the moment. In addition, the key factor for polymer-based solar cells with high-efficiency is to invent new materials. Organic solar cell has attracted significant researches and commercial interest due to its low cost in fabrication and flexibility in applications. However, they suffer from relatively low conversion efficiency. The summarization of the significance and concept of high efficiency polymer solar cell technologies are presented.

  4. Preoperative serum midkine concentration is a prognostic marker for esophageal squamous cell carcinoma.

    Science.gov (United States)

    Shimada, Hideaki; Nabeya, Yoshihiro; Tagawa, Masatoshi; Okazumi, Shin-ichi; Matsubara, Hisahiro; Kadomatsu, Kenji; Muramatsu, Takashi; Ikematsu, Shinya; Sakuma, Sadatoshi; Ochiai, Takenori

    2003-07-01

    High preoperative serum midkine concentration is associated with poor survival in patients with esophageal cancer, even after radical surgery, and thus may have prognostic value. Midkine (MK), a heparin-binding growth factor, is expressed in numerous cancer tissues, and serum MK (S-MK) concentrations are increased in patients with various neoplasms. The aim of this study is to evaluate the clinical significance of S-MK in patients with esophageal squamous cell cancer (SCC). S-MK was measured by enzyme-linked immunosorbent assay in 135 healthy controls, 16 patients with benign esophageal disease, and 93 patients with primary esophageal SCC before surgery. The serum concentrations of carcinoembryonic antigen (CEA), SCC antigen (SCC-Ag), and cytokeratin 19 fragment (CYFRA21-1) were also evaluated. All patients with esophageal SCC underwent radical esophagectomy. Tumor MK expression was assessed by immunohistochemistry in 14 fresh tumor specimens. To determine whether S-MK is of value as a prognostic factor, the authors conducted a survival analysis using Cox's proportional hazards model. S-MK values in patients with esophageal SCC were significantly higher than those in healthy controls (417 +/- 342 pg/ml vs. 154 +/- 76 pg/ml, P esophageal SCC were classified as positive. MK expression by the tumor was significantly associated with high level of S-MK. High S-MK (>/= 300 pg/ml) was associated with tumor size, immunoreactivity and poor survival. Multivariate analysis indicated that S-MK was an independent prognostic factor. S-MK may be a useful tumor marker for esophageal SCC. Increased preoperative S-MK in patients with esophageal SCC is associated with poor survival.

  5. The effect of low concentrations of ethanol on gastric adenocarcinoma cell lines

    OpenAIRE

    Wu Lingjiao; Chen Shaohua; Zhang Yu; Pan Hongming

    2014-01-01

    Chronic alcohol consumption has been identified as a significant risk factor for cancer in humans. The aim of the study was to analyze the influence of low concentrations of ethanol on gastric adenocarcinoma cell viability, apoptosis, and changes in the expression of alcohol dehydrogenase with ethanol treatment. Gastric adenocarcinoma cell lines (MGC803, MGC823 and SGC7901) were treated with different concentrations of ethanol (0.03125%, 0.0625%, 0.125%, 0....

  6. Application of the wavelet image analysis technique to monitor cell concentration in bioprocesses

    Directory of Open Access Journals (Sweden)

    G. J. R. Garófano

    2005-12-01

    Full Text Available The growth of cells of great practical interest, such as, the filamentous cells of bacterium Streptomyces clavuligerus, the yeast Saccharomyces cerevisiae and the insect Spodoptera frugiperda (Sf9 cell, cultivated in shaking flasks with complex media at appropriate temperatures and pHs, was quantified by the new wavelet transform technique. This image analysis tool was implemented using Matlab 5.2 software to process digital images acquired of samples taken of these three types of cells throughoot their cultivation. The values of the average wavelet coefficients (AWCs of simplified images were compared with experimental measurements of cell concentration and with computer-based densitometric measurements. AWCs were shown to be directly proportional to measurements of cell concentration and to densitometric measurements, making evident the great potential of the wavelet transform technique to quantitatively estimate the growth of several types of cells.

  7. Flat plate vs. concentrator solar photovoltaic cells - A manufacturing cost analysis

    Science.gov (United States)

    Granon, L. A.; Coleman, M. G.

    1980-01-01

    The choice of which photovoltaic system (flat plate or concentrator) to use for utilizing solar cells to generate electricity depends mainly on the cost. A detailed, comparative manufacturing cost analysis of the two types of systems is presented. Several common assumptions, i.e., cell thickness, interest rate, power rate, factory production life, polysilicon cost, and direct labor rate are utilized in this analysis. Process sequences, cost variables, and sensitivity analyses have been studied, and results of the latter show that the most important parameters which determine manufacturing costs are concentration ratio, manufacturing volume, and cell efficiency. The total cost per watt of the flat plate solar cell is $1.45, and that of the concentrator solar cell is $1.85, the higher cost being due to the increased process complexity and material costs.

  8. Biological Effects of Osteoblast-Like Cells on Nanohydroxyapatite Particles at a Low Concentration Range

    Directory of Open Access Journals (Sweden)

    Xiaochen Liu

    2011-01-01

    Full Text Available The biological effects of osteoblast-like MG-63 cells on nanohydroxyapatite (n-HA at the low concentration range (5–25 g/mL for 5 days was investigated. The results showed the viability and actin cytoskeleton of the cells descended with the increase of the concentration of n-HA, and the actin cytoskeleton of cells was depolymerised and became more disordered. Apoptotic rate of cells (1.85%, 1.99%, and 2.29% increased with the increase of n-HA concentration (5, 15, and 25 g/mL and become significantly higher than the control. Total intracellular protein content decreased with n-HA concentration increase, showing significant difference between 25 g/mL and the control, and no significant change of ALP activity was observed at the 5th day. The results revealed that the cell growth was inhibited by n-HA in a concentration-dependent manner, and the obvious biological effects of MG-63 cells on n-HA existed at the low concentration range from 5 to 25 g/mL.

  9. Quantitation of low concentrations of polysorbates in high protein concentration formulations by solid phase extraction and cobalt-thiocyanate derivatization.

    Science.gov (United States)

    Kim, Justin; Qiu, Jinshu

    2014-01-02

    A spectrophotometric method was developed to quantify low polysorbate (PS) levels in biopharmaceutical formulations containing high protein concentrations. In the method, Oasis HLB solid phase extraction (SPE) cartridge was used to extract PS from high protein concentration formulations. After loading a sample, the cartridge was washed with 4M guanidine HCl and 10% (v/v) methanol, and the retained PS was eluted by acetonitrile. Following the evaporation of acetonitrile, aqueous cobalt-thiocyanate reagent was added to react with the polyoxyethylene oxide chain of polysorbates to form a blue colored PS-cobaltothiocyante complex. This colored complex was then extracted into methylene chloride and measured spectrophotometrically at 620 nm. The method performance was evaluated on three products containing 30-40 mg L(-1) PS-20 and PS-80 in ≤70 g L(-1) protein formulations. The method was specific (no matrix interference identified in three types of protein formulations), sensitive (quantitation limit of 10 mg L(-1) PS) and robust with good precision (relative standard deviation ≤6.4%) and accuracy (spike recoveries from 95% to 101%). The linear range of the method for both PS-20 and PS-80 was 10 to 80 mg L(-1) PS. By diluting samples with 6M guanidine HCl and/or using different methylene chloride volumes to extract the colored complexes of standards and samples, the method could accurately and precisely quantify 40 mg L(-1) PS in up to 300 g L(-1) protein formulations.

  10. High rate, high reliability Li/SO2 cells

    Science.gov (United States)

    Chireau, R.

    1982-03-01

    The use of the lithium/sulfur dioxide system for aerospace applications is discussed. The high rate density in the system is compared to some primary systems: mercury zinc, silver zinc, and magnesium oxide. Estimates are provided of the storage life and shelf life of typical lithium sulfur batteries. The design of lithium cells is presented and criteria are given for improving the output of cells in order to achieve high rate and high reliability.

  11. Production of Concentrated Pickering Emulsions with Narrow Size Distributions Using Stirred Cell Membrane Emulsification.

    Science.gov (United States)

    Manga, Mohamed S; York, David W

    2017-09-12

    Stirred cell membrane emulsification (SCME) has been employed to prepare concentrated Pickering oil in water emulsions solely stabilized by fumed silica nanoparticles. The optimal conditions under which highly stable and low-polydispersity concentrated emulsions using the SCME approach are highlighted. Optimization of the oil flux rates and the paddle stirrer speeds are critical to achieving control over the droplet size and size distribution. Investigating the influence of oil volume fraction highlights the criticality of the initial particle loading in the continuous phase on the final droplet size and polydispersity. At a particle loading of 4 wt %, both the droplet size and polydispersity increase with increasing of the oil volume fraction above 50%. As more interfacial area is produced, the number of particles available in the continuous phase diminishes, and coincidently a reduction in the kinetics of particle adsorption to the interface resulting in larger polydisperse droplets occurs. Increasing the particle loading to 10 wt % leads to significant improvements in both size and polydispersity with oil volume fractions as high as 70% produced with coefficient of variation values as low as ∼30% compared to ∼75% using conventional homogenization techniques.

  12. Vitrification by Ultra-fast Cooling at a Low Concentration of Cryoprotectants in a Quartz Microcapillary: A Study Using Murine Embryonic Stem Cells

    OpenAIRE

    He, Xiaoming; Park, Eric Y H; Fowler, Alex; Martin L. Yarmush; Toner, Mehmet

    2008-01-01

    Conventional cryopreservation protocols for slow-freezing or vitrification involve cell injury due to ice formation/cell dehydration or toxicity of high cryoprotectant (CPA) concentrations, respectively. In this study, we developed a novel cryopreservation technique to achieve ultra-fast cooling rates using a quartz microcapillary (QMC). The QMC enabled vitrification of murine embryonic stem (ES) cells using an intracellular cryoprotectant concentration in the range used for slowing freezing ...

  13. Optimization of temperature, sugar concentration, and inoculum size to maximize ethanol production without significant decrease in yeast cell viability.

    Science.gov (United States)

    Laluce, Cecilia; Tognolli, João Olimpio; de Oliveira, Karen Fernanda; Souza, Crisla Serra; Morais, Meline Rezende

    2009-06-01

    Aiming to obtain rapid fermentations with high ethanol yields and a retention of high final viabilities (responses), a 2(3) full-factorial central composite design combined with response surface methodology was employed using inoculum size, sucrose concentration, and temperature as independent variables. From this statistical treatment, two well-fitted regression equations having coefficients significant at the 5% level were obtained to predict the viability and ethanol production responses. Three-dimensional response surfaces showed that increasing temperatures had greater negative effects on viability than on ethanol production. Increasing sucrose concentrations improved both ethanol production and viability. The interactions between the inoculum size and the sucrose concentrations had no significant effect on viability. Thus, the lowering of the process temperature is recommended in order to minimize cell mortality and maintain high levels of ethanol production when the temperature is on the increase in the industrial reactor. Optimized conditions (200 g/l initial sucrose, 40 g/l of dry cell mass, 30 degrees C) were experimentally confirmed and the optimal responses are 80.8 +/- 2.0 g/l of maximal ethanol plus a viability retention of 99.0 +/- 3.0% for a 4-h fermentation period. During consecutive fermentations with cell reuse, the yeast cell viability has to be kept at a high level in order to prevent the collapse of the process.

  14. Melaleuca alternifolia Concentrate Inhibits in Vitro Entry of Influenza Virus into Host Cells

    Directory of Open Access Journals (Sweden)

    Lifang Jiang

    2013-08-01

    Full Text Available Influenza virus causes high morbidity among the infected population annually and occasionally the spread of pandemics. Melaleuca alternifolia Concentrate (MAC is an essential oil derived from a native Australian tea tree. Our aim was to investigate whether MAC has any in vitro inhibitory effect on influenza virus infection and what mechanism does the MAC use to fight the virus infection. In this study, the antiviral activity of MAC was examined by its inhibition of cytopathic effects. In silico prediction was performed to evaluate the interaction between MAC and the viral haemagglutinin. We found that when the influenza virus was incubated with 0.010% MAC for one hour, no cytopathic effect on MDCK cells was found after the virus infection and no immunofluorescence signal was detected in the host cells. Electron microscopy showed that the virus treated with MAC retained its structural integrity. By computational simulations, we found that terpinen-4-ol, which is the major bioactive component of MAC, could combine with the membrane fusion site of haemagglutinin. Thus, we proved that MAC could prevent influenza virus from entering the host cells by disturbing the normal viral membrane fusion procedure.

  15. Direct measurement of local dissolved oxygen concentration spatial profiles in a cell culture environment.

    Science.gov (United States)

    Kagawa, Yuki; Matsuura, Katsuhisa; Shimizu, Tatsuya; Tsuneda, Satoshi

    2015-06-01

    Controlling local dissolved oxygen concentration (DO) in media is critical for cell or tissue cultures. Various biomaterials and culture methods have been developed to modulate DO. Direct measurement of local DO in cultures has not been validated as a method to test DO modulation. In the present study we developed a DO measurement system equipped with a Clark-type oxygen microelectrode manipulated with 1 μm precision in three-dimensional space to explore potential applications for tissue engineering. By determining the microelectrode tip position precisely against the bottom plane of culture dishes with rat or human cardiac cells in static monolayer culture, we successfully obtained spatial distributions of DO in the medium. Theoretical quantitative predictions fit the obtained data well. Based on analyses of the variance between samples, we found the data reflected "local" oxygen consumption in the vicinity of the microelectrode and the detection of temporal changes in oxygen consumption rates of cultured cells was limited by the diffusion rate of oxygen in the medium. This oxygen measuring system monitors local oxygen consumption and production with high spatial resolution, and can potentially be used with recently developed oxygen modulating biomaterials to design microenvironments and non-invasively monitor local DO dynamics during culture. © 2015 Wiley Periodicals, Inc.

  16. Development of concentrating solar cell in America%美国聚光太阳电池技术进展

    Institute of Scientific and Technical Information of China (English)

    郁济敏; 付文莉

    2009-01-01

    对美国能源部的高性能光伏项目作了简要介绍,对该项目的分包商Spectrolab公司、加利福尼亚技术研究所、俄亥俄州、特拉华大学、JX Crystal公司、SunPower公司关于Ⅲ-Ⅴ族多结聚光太阳电池研究的最新进展,以及Amonix公司和Concentrating Technologies、LLC对于聚光器组件的研究进展做了报道.对Emcore公司三结地面聚光电池的设计和Emcore未来聚光电池的发展作了阐述.%U.S. Department of Energy (DOE) initiated the High-Performance Photovoltaic (HiPerf PV) Project is introduced in this paper. The research development of Ⅲ - Ⅴ multijunction concentrating solar cell in Spectrolab, California Institute of Technology, Ohio State, University of Delaware, JX Crystals, and SunPower Corporation as the subcontractors is reported. The research progress of concentrator components in Amonix and Concentrating Technologies,LLC is introduced. The design of three-junction ground concentrating solar cell in Emcore and the future development of concentrating solar cell of Emcore is presented.

  17. Development of monocrystalline CdTe solar cells for terrestrial applications, especially for optical concentrators

    Energy Technology Data Exchange (ETDEWEB)

    Jaeger, H.; Fuessl, B.; Seipp, E.; Thiel, R.

    1981-01-01

    During the first phase of the contract most of the work was done in order to optimise the most important structural elements of the solar cells, which were produced on the base of crystalline CdTe. Two approaches in development of such cells were made: n-CdTe crystals were covered with a p-type heterolayer as a window for sunlight; ZnTe was evaporated as a p-type layer. p-CdTe crystals were covered with a n-type heterolayer as a window. Here, CdS evaporation layers and indium-tin-oxide (ITO) sputtered layers were applied. Within the first approach the realisation of ZnTe-layers simultaneously highly conductive and transparent was tried by using numerous dopants. Within the second approach, the development of p-CdTe/n-CdS solar cells, the resistances of the ohmic contacts on the back of the p-CdTe wafers were a major problem. We found some ways of preparing ohmic contacts of acceptable contact resistance, but an ideal problem solution is lacking still. We found a dependence of the contact resistance on the p-CdTe doping concentration. Solar cells made from p-CdTe crystals covered with n/sup +/-CdS attained an open circuit voltage of 655 mV and a short circuit current density of 13.8 mA/cm/sup 2/ in a 100 mW/cm/sup 2/ light. Assuming a sufficiently low series resistance we expect an efficiency of about 6 percent. Besides the n/sup +/-CdS layers n/sup +/-ITO-layers (indium-tin-oxide) were deposited on p-CdTe by sputtering. These cells exhibit a short circuit density a little higher but a lower open circuit voltage than the heterosolarcells with n/sup +/-CdS.

  18. Design, Fabrication and Test of a High Efficiency Refractive Secondary Concentrator for Solar Applications

    Science.gov (United States)

    Wong, Wayne A.; Geng, Steven M.; Castle, Charles H.; Macosko, Robert P.

    2000-01-01

    Common to many of the space applications that utilize solar thermal energy such as electric power conversion, thermal propulsion, and furnaces, is a need for highly efficient, solar concentration systems. An effort is underway to develop the refractive secondary concentrator, which uses refraction and total internal reflection to efficiently concentrate and direct solar energy. When used in combination with advanced primary concentrators, the refractive secondary concentrator enables very high system concentration ratios (10,000 to 1) and very high temperatures (greater than 2000 K). Presented is an overview of the effort at the NASA Glenn Research Center to evaluate the performance of a prototype single crystal sapphire refractive secondary concentrator and to compare the performance with analytical models. The effort involves the design and fabrication of a secondary concentrator, design and fabrication of a calorimeter and its support hardware, calibration of the calorimeter, testing of the secondary concentrator in NASA Glenn's Tank 6 solar thermal vacuum facility, and comparing the test results with predictions. Test results indicate an average throughput efficiency of 87%. It is anticipated that reduction of a known reflection loss with an anti-reflective coating would result in a secondary concentrator throughput efficiency of approximately 93%.

  19. Absolute choline concentration measured by quantitative proton MR spectroscopy correlates with cell density in meningioma

    Energy Technology Data Exchange (ETDEWEB)

    Yue, Qiang [University of Tsukuba, Department of Neurosurgery, Institute of Clinical Medicine, Tsukuba Science City, Ibaraki (Japan)]|[West China Hospital of Sichuan University, Huaxi MR Research Center, Department of Radiology, Chengdu (China); Shibata, Yasushi; Kawamura, Hiraku; Matsumura, Akira [University of Tsukuba, Department of Neurosurgery, Institute of Clinical Medicine, Tsukuba Science City, Ibaraki (Japan); Isobe, Tomonori [Kitasato University, Department of Medical Technology, School of Allied Health Sciences, Minato, Tokyo (Japan); Anno, Izumi [University of Tsukuba, Department of Radiology, Institute of Clinical Medicine, Tsukuba, Ibaraki (Japan); Gong, Qi-Yong [West China Hospital of Sichuan University, Huaxi MR Research Center, Department of Radiology, Chengdu (China)]|[University of Liverpool, Division of Medical Imaging, Faculty of Medicine, Liverpool (United Kingdom)

    2009-01-15

    This study was aimed to investigate the relationship between quantitative proton magnetic resonance spectroscopy (1H-MRS) and pathological changes in meningioma. Twenty-two meningioma cases underwent single voxel 1H-MRS (point-resolved spectroscopy sequence, repetition time/echo time = 2,000 ms/68, 136, 272 ms). Absolute choline (Cho) concentration was calculated using tissue water as the internal reference and corrected according to intra-voxel cystic/necrotic parts. Pathological specimens were stained with MIB-1 antibody to measure cell density and proliferation index. Correlation analysis was performed between absolute Cho concentration and cell density and MIB-1 labeled proliferation index. Average Cho concentration of all meningiomas before correction was 2.95 {+-} 0.86 mmol/kg wet weight. It was increased to 3.23 {+-} 1.15 mmol/kg wet weight after correction. Average cell density of all meningiomas was 333 {+-} 119 cells/HPF, and average proliferation index was 2.93 {+-} 5.72%. A linear, positive correlation between cell density and Cho concentration was observed (r = 0.650, P = 0.001). After correction of Cho concentration, the correlation became more significant (r = 0.737, P < 0.001). However, no significant correlation between Cho concentration and proliferation index was found. There seemed to be a positive correlation trend after correction of Cho concentration but did not reach significant level. Absolute Cho concentration, especially Cho concentration corrected according to intra-voxel cystic/necrotic parts, reflects cell density of meningioma. (orig.)

  20. Effect of platelet-rich plasma (PRP) concentration on proliferation, neurotrophic function and migration of Schwann cells in vitro.

    Science.gov (United States)

    Zheng, Canbin; Zhu, Qingtang; Liu, Xiaolin; Huang, Xijun; He, Caifeng; Jiang, Li; Quan, Daping; Zhou, Xiang; Zhu, Zhaowei

    2016-05-01

    Platelet-rich plasma (PRP) contains various growth factors and appears to have the potential to promote peripheral nerve regeneration, but evidence is lacking regarding its biological effect on Schwann cells (SCs). The present study was designed to investigate the effect of PRP concentration on SCs in order to determine the plausibility of using this plasma-derived therapy for peripheral nerve injury. PRP was obtained from rats by double-step centrifugation and was characterized by determining platelet numbers and growth factor concentrations. Primary cultures of rat SCs were exposed to various concentrations of PRP (40%, 20%, 10%, 5% and 2.5%). Cell proliferation assays and flow cytometry were performed to study to assess SC proliferation. Quantitative real-time PCR and ELISA analysis were performed to determine the ability of PRP to induce SCs to produce nerve growth factor (NGF) and glial cell line-derived neurotrophic factor (GDNF). Microchemotaxis assay was used to analyse the cell migration capacity. The results obtained indicated that the platelet concentration and growth factors in our PRP preparations were significantly higher than in whole blood. Cell culture experiments showed that 2.5-20% PRP significantly stimulated SC proliferation and migration compared to untreated controls in a dose-dependent manner. In addition, the expression and secretion of NGF and GDNF were significantly increased. However, the above effects of SCs were suppressed by high PRP concentrations (40%). In conclusion, the appropriate concentration of PRP had the potency to stimulate cell proliferation, induced the synthesis of neurotrophic factors and significantly increased migration of SCs dose-dependently. Copyright © 2013 John Wiley & Sons, Ltd.

  1. Miniaturized concentration cells for small-scale energy harvesting based on reverse electrodialysis

    Science.gov (United States)

    Banan Sadeghian, Ramin; Pantchenko, Oxana; Tate, Daniel; Shakouri, Ali

    2011-10-01

    We describe experimental and theoretical results that demonstrate the feasibility of power generation using concentration cells based on ionic concentration gradients and reverse electrodialysis. A peak power density of 0.2 (0.7) μW cm-2 and a maximum energy density of 0.4 (0.4) mJ cm-3 delivered in 3 h to a 2 (5) kΩ resistor were recorded using a microfiltration (anion exchange) membrane, respectively. A comprehensive model is developed to predict the evolution of the output voltage with time in relation to the solute concentration in each cell and derive the power density and efficiency limits.

  2. The regeneration and recycle of chromium etching solutions using concentrator cell membrane technology.

    Science.gov (United States)

    Chaudhary, Abdul J; Ganguli, Bijita; Grimes, Susan M

    2006-02-01

    The regeneration of chromium (VI) and the recovery of etched copper from chromium etching solutions by electrodialysis is improved by the addition of a concentrator cell in the catholyte chamber. The concentrator media used are ion-exchange resins or activated carbon cloth. The maximum percentages for the regeneration of chromium and recovery of copper in these systems is however less than 80% and 90% respectively because of the competition between the processes of oxidation of Cr(III) and electrodeposition of copper. A novel combination of electrolysis with electrodialysis and concentrator cell technology is developed that achieves 92% chromium regeneration and 90% copper recovery.

  3. SandTraps are efficient, scalable, and mild systems for harvesting, washing and concentrating cells.

    Science.gov (United States)

    Frauenstein, Danny; Seidel, Katja; Adrian, Lorenz

    2017-01-01

    Microbial cells vary widely in size, specific density, shearing resistance, oxygen sensitivity and abundance so that differential harvesting and washing procedures are needed to efficiently recover cells from dilute suspensions. We here describe a mild, simple, variable and cost-efficient method to harvest cells on columns packed with silica beads. The method collects and concentrates 40-98% of the cells preserving enzymatic activity and cell viability. The method can be applied for strictly anaerobic microorganisms, is scalable to different culture volumes and can be multiplexed in standardized systems. We see major application potential in harvesting small cells leaking through 0.2μm filters, for harvesting strictly anaerobic cells and for differential harvesting of cells according to cell size using a gradient system.

  4. 3D-printed concentrator arrays for external light trapping on thin film solar cells

    NARCIS (Netherlands)

    van Dijk, Lourens; Marcus, E. A. Pepijn; Oostra, A. Jolt; Schropp, Ruud E. I.; Di Vece, Marcel

    After our recent demonstration of a 3D-printed external light trap on a small solar cell, we now consider its potential for large solar panels. An external light trap consists of a parabolic concentrator and a spacer that redirects the photons that are reflected by the solar cell back towards the

  5. 3D-printed concentrator arrays for external light trapping on thin film solar cells

    NARCIS (Netherlands)

    van Dijk, Lourens; Marcus, E. A. Pepijn; Oostra, A. Jolt; Schropp, Ruud E. I.; Di Vece, Marcel

    2015-01-01

    After our recent demonstration of a 3D-printed external light trap on a small solar cell, we now consider its potential for large solar panels. An external light trap consists of a parabolic concentrator and a spacer that redirects the photons that are reflected by the solar cell back towards the so

  6. 3D-printed concentrator arrays for external light trapping on thin film solar cells

    NARCIS (Netherlands)

    van Dijk, Lourens; Marcus, E. A. Pepijn; Oostra, A. Jolt; Schropp, Ruud E. I.; Di Vece, Marcel

    2015-01-01

    After our recent demonstration of a 3D-printed external light trap on a small solar cell, we now consider its potential for large solar panels. An external light trap consists of a parabolic concentrator and a spacer that redirects the photons that are reflected by the solar cell back towards the so

  7. Novel DDR Processing of Corn Stover Achieves High Monomeric Sugar Concentrations from Enzymatic Hydrolysis (230 g/L) and High Ethanol Concentration (10% v/v) During Fermentation

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Xiaowen; Jennings, Ed; Shekiro, Joe; Kuhn, Erik M.; O' Brien, Marykate; Wang, Wei; Schell, Daniel J.; Himmel, Mike; Elander, Richard T.; Tucker, Melvin P.

    2015-04-03

    Distilling and purifying ethanol, butanol, and other products from second and later generation lignocellulosic biorefineries adds significant capital and operating cost for biofuels production. The energy costs associated with distillation affects plant gate and life cycle analysis costs. Lower titers in fermentation due to lower sugar concentrations from pretreatment increase both energy and production costs. In addition, higher titers decrease the volumes required for enzymatic hydrolysis and fermentation vessels. Therefore, increasing biofuels titers has been a research focus in renewable biofuels production for several decades. In this work, we achieved over 200 g/L of monomeric sugars after high solids enzymatic hydrolysis using the novel deacetylation and disc refining (DDR) process on corn stover. The high sugar concentrations and low chemical inhibitor concentrations from the DDR process allowed ethanol titers as high as 82 g/L in 22 hours, which translates into approximately 10 vol% ethanol. To our knowledge, this is the first time that 10 vol% ethanol in fermentation derived from corn stover without any sugar concentration or purification steps has been reported. Techno-economic analysis shows the higher titer ethanol achieved from the DDR process could significantly reduce the minimum ethanol selling price from cellulosic biomass.

  8. High Efficiency Reversible Fuel Cell Power Converter

    DEFF Research Database (Denmark)

    Pittini, Riccardo

    The large scale integration of renewable energy sources requires suitable energy storage systems to balance energy production and demand in the electrical grid. Bidirectional fuel cells are an attractive technology for energy storage systems due to the high energy density of fuel. Compared...... entitled "High Efficiency Reversible Fuel Cell Power Converter" and it presents the design of a high efficiency dc-dc converter developed and optimized for bidirectional fuel cell applications. First, a brief overview of fuel cell and energy storage technologies is presented. Different system topologies...... to traditional unidirectional fuel cell, bidirectional fuel cells have increased operating voltage and current ranges. These characteristics increase the stresses on dc-dc and dc-ac converters in the electrical system, which require proper design and advanced optimization. This work is part of the PhD project...

  9. Thermodynamically consistent description of the hydrodynamics of free surfaces covered by insoluble surfactants of high concentration

    OpenAIRE

    Thiele, Uwe; Archer, Andrew J.; Plapp, Mathis

    2012-01-01

    In this paper we propose several models that describe the dynamics of liquid films which are covered by a high concentration layer of insoluble surfactant. First, we briefly review the 'classical' hydrodynamic form of the coupled evolution equations for the film height and surfactant concentration that are well established for small concentrations. Then we re-formulate the basic model as a gradient dynamics based on an underlying free energy functional that accounts for wettability and capill...

  10. Incomplete Ion Dissociation Underlies the Weakened Attraction between DNA Helices at High Spermidine Concentrations

    OpenAIRE

    Yang,Jie; Rau, Donald C

    2005-01-01

    We have investigated the salt sensitivity of the hexagonal-to-cholesteric phase transition of spermidine-condensed DNA. This transition precedes the resolubilization of precipitated DNA that occurs at high spermidine concentration. The sensitivity of the critical spermidine concentration at the transition point to the anion species and the NaCl concentration indicates that ion pairing of this trivalent ion underlies this unusual transition. Osmotic pressure measurements of spermidine salt sol...

  11. Changes of Concentrations of Free Amino Acids in HeLa Cells Induced by Antitumor Agent

    OpenAIRE

    Tagawa, Yutaka; Mine, Yoshikazu; Yasutake, Toru; Matsuo, Satoshi; Tomita, Masao

    1993-01-01

    In this report we have investigated that the amino acid is most actively metabolized in the tumor cells damaged by antitumor agents, and discussed imbalanced amino acid procedure to be combined with cancer chemotherapy. The concentrations of 24 free amino acids in medium and in cells were determined in HeLa cells treated with Adriamycin. The free amino acids that decreased in the medium but increased in cells were glutamine and arginine. From this result, we treated HeLa cells with Adriamycin...

  12. Mutagenesis of AS52 cells by low concentrations of lead(II) and mercury(II)

    Science.gov (United States)

    Ariza, M E; Williams, M V

    1996-01-01

    Little is known at the molecular level concerning the genotoxic effects following the acute exposure of eukaryotic cells to low concentrations of lead (II) or mercury (II). There have been conflicting reports concerning the mutagenic potential of these heavy metals, and there have not been any studies performed to determine the molecular mechanism(s) by which these metals are mutagenic. The Chinese hamster ovary cell line, AS52, contains a stably integrated single functional copy of the Escherichia coli xanthine-guanine phosphoribosyltransferase (gpt) gene. Mutations in the gpt gene confer resistance to 6-thioguanine (TG). There was little effect on viability, as measured by relative cloning efficiency, of AS52 cells exposed to lead (II) or mercury (II) up to concentrations of 0.5 microM and 0.3 microM, respectively. However, higher concentrations of the metals caused a significant increase in cell death. There was also a dose-dependent increase in the isolation of mutants resistant to TG in treated cells when compared to non-treated controls. Concentrations of the metals as low as 0.1 microM caused a significant increase in the number of mutants resistant to TG when compared to the number of spontaneous mutants obtained in nontreated controls. While the molecular mechanism(s) by which lead and mercury (II) are genotoxic is unknown, the results of this study demonstrate that low concentrations of lead (II) and mercury (II) are mutagenic in eukaryotic cells.

  13. Intermittent High Glucose Enhances Apoptosis in INS-1 Cells

    Directory of Open Access Journals (Sweden)

    Xiao-li Shi

    2011-01-01

    Full Text Available To investigate the effect of intermittent high glucose (IHG and sustained high glucose (SHG on inducing β-cell apoptosis and the potential involved mechanisms, INS-1 beta cells were incubated for 72 h in the medium containing different glucose concentrations: control (5.5 mmol/L, SHG (33.3 mmol/L, and IHG (5.5 mmol/L and 33.3 mmol/L glucose alternating every 12 h. Cell viability, apoptosis rate, and oxidative-stress markers were determined. The results showed that the apoptosis induced by IHG was more obvious than that by SHG. Simultaneously, the intracellular level of oxidative stress was more significantly increased in INS-1 cells exposed to IHG. These findings suggest that intermittent high glucose could be more deleterious to β-cell than a constant high concentration of glucose, this may be due to the aggravation of oxidative stress triggered by intermittent high glucose.

  14. Lower concentrations of blueberry polyphenolic-rich extract differentially alter HepG2 cell proliferation and expression of genes related to cell-cycle, oxidation and epigenetic machinery

    Science.gov (United States)

    In vitro cancer models have been used to study the effect of relatively high concentrations (>200 ug/ml) of phenolic plant extracts upon cell proliferation. In this study we report that the treatment of human hepatocarcinoma HepG2 cells with lower concentrations of blueberry phenolic extract (6.5-10...

  15. Effect of digestion time on anaerobic digestion with high ammonia concentration

    Science.gov (United States)

    Oktavitri, Nur Indradewi; Purnobasuki, Hery; Kuncoro, Eko Prasetyo; Purnamasari, Indah; Semma Hadinnata, P.

    2016-03-01

    Anaerobic digestion was developed to treat high concentration organic compound efficiently in certain Digestion Time (DT). High ammonia concentration could influenced removal organic compound in digestion. This bench scale study investigated the effect of digestion time on anaerobic batch reactor with high ammonia concentration. Total Ammonia Nitrogen (TAN) concentration was adjusted 4000 and 5000 mg/1, Digestion time was ranged from 0-26 d, operation temperature was ranged from 28-29°C, inoculum was collected from slaughter house sludge. The degradation of Chemical Oxygen Demand (COD) correlated with digestion time. The concentration of TAN from synthetic wastewater contain 5000 mg/1 of TAN more fluctuated than those use 4000 mg/1 of TAN. However, the biogas production from wastewater contained 4000 mg/1 of TAN gradually increased until 24 d of DT. The reactor contain 5000 mg/1 of TAN only growth until 12 d and steady state at over 12 d of digestion time.

  16. Melatonin in Arabidopsis thaliana acts as plant growth regulator at low concentrations and preserves seed viability at high concentrations.

    Science.gov (United States)

    Hernández, Ismaél Gatica; Gomez, Federico José Vicente; Cerutti, Soledad; Arana, María Verónica; Silva, María Fernanda

    2015-09-01

    Since the discovery of melatonin in plants, several roles have been described for different species, organs, and developmental stages. Arabidopsis thaliana, being a model plant species, is adequate to contribute to the elucidation of the role of melatonin in plants. In this work, melatonin was monitored daily by UHPLC-MS/MS in leaves, in order to study its diurnal accumulation as well as the effects of natural and artificial light treatments on its concentration. Furthermore, the effects of exogenous application of melatonin to assess its role in seed viability after heat stress and as a regulator of growth and development of vegetative tissues were evaluated. Our results indicate that melatonin contents in Arabidopsis were higher in plants growing under natural radiation when compared to those growing under artificial conditions, and its levels were not diurnally-regulated. Exogenous melatonin applications prolonged seed viability after heat stress conditions. In addition, melatonin applications retarded leaf senescence. Its effects as growth promoter were dose and tissue-dependent; stimulating root growth at low concentrations and decreasing leaf area at high doses.

  17. Prodigious Effects of Concentration Intensification on Nanoparticle Synthesis: A High-Quality, Scalable Approach.

    Science.gov (United States)

    Williamson, Curtis B; Nevers, Douglas R; Hanrath, Tobias; Robinson, Richard D

    2015-12-23

    Realizing the promise of nanoparticle-based technologies demands more efficient, robust synthesis methods (i.e., process intensification) that consistently produce large quantities of high-quality nanoparticles (NPs). We explored NP synthesis via the heat-up method in a regime of previously unexplored high concentrations near the solubility limit of the precursors. We discovered that in this highly concentrated and viscous regime the NP synthesis parameters are less sensitive to experimental variability and thereby provide a robust, scalable, and size-focusing NP synthesis. Specifically, we synthesize high-quality metal sulfide NPs (200 g) relative to the current field of large-scale (0.1-5 g yields) and laboratory-scale (<0.1 g) efforts. Compared to conventional synthesis methods (hot injection with dilute precursor concentration) characterized by rapid growth and low yield, our highly concentrated NP system supplies remarkably controlled growth rates and a 10-fold increase in NP volumetric production capacity (86 g/L). The controlled growth, high yield, and robust nature of highly concentrated solutions can facilitate large-scale nanomanufacturing of NPs by relaxing the synthesis requirements to achieve monodisperse products. Mechanistically, our investigation of the thermal and rheological properties and growth rates reveals that this high concentration regime has reduced mass diffusion (a 5-fold increase in solution viscosity), is stable to thermal perturbations (∼64% increase in heat capacity), and is resistant to Ostwald ripening.

  18. High concentrations of KCl release noradrenaline from noradrenergic neurons in the rat anococcygeus muscle

    Directory of Open Access Journals (Sweden)

    C.B.L. Araujo

    2003-01-01

    Full Text Available The aim of the present study was to investigate the effects of high concentrations of KCl in releasing noradrenaline from sympathetic nerves and its actions on postsynaptic alpha-adrenoceptors. We measured the isotonic contractions induced by KCl in the isolated rat anococcygeus muscle under different experimental conditions. The contractile responses induced by KCl were inhibited by alpha-adrenoceptor antagonists in 2.5 mM Ca2+ solution. Prazosin reduced the maximum effect from 100 to 53.9 ± 10.2% (P<0.05 while the pD2 values were not changed. The contractile responses induced by KCl were abolished by prazosin in Ca2+-free solution (P<0.05. Treatment of the rats with reserpine reduced the maximum effect induced by KCl as compared to the contractile responses induced by acetylcholine from 339.5 ± 157.8 to 167.3 ± 65.5% (P<0.05, and increased the pD2 from 1.57 ± 0.01 to 1.65 ± 0.006 (P<0.05, but abolished the inhibitory effect of prazosin (P<0.05. In contrast, L-NAME increased the contractile responses induced by 120 mM KCl by 6.2 ± 2.3% (P<0.05, indicating that KCl could stimulate the neurons that release nitric oxide, an inhibitory component of the contractile response induced by KCl. Our results indicate that high concentrations of KCl induce the release of noradrenaline from noradrenergic neurons, which interacts with alpha1-adrenoceptors in smooth muscle cells, producing a contractile response in 2.5 mM Ca2+ (100% and in Ca2+-free solution, part of which is due to a direct effect of KCl on the rat anococcygeus muscle.

  19. PSA Solar furnace: A facility for testing PV cells under concentrated solar radiation

    Energy Technology Data Exchange (ETDEWEB)

    Fernandez-Reche, J.; Canadas, I.; Sanchez, M.; Ballestrin, J.; Yebra, L.; Monterreal, R.; Rodriguez, J.; Garcia, G. [Concentration Solar Technologies, Plataforma Solar de Almeria-CIEMAT P.O. Box 22, Tabernas, E-04200 (Almeria) (Spain); Alonso, M.; Chenlo, F. [Photovoltaic Components and Systems, Renewable Energies Department-CIEMAT Avda. Complutense, 22, Madrid, E-28040 (Spain)

    2006-09-22

    The Plataforma Solar de Almeria (PSA), the largest centre for research, development and testing of concentration solar thermal technologies in Europe, has started to apply its knowledge, facilities and resources to development of the Concentration PV technology in an EU-funded project HiConPV. A facility for testing PV cells under solar radiation concentrated up to 2000x has recently been completed. The advantages of this facility are that, since it is illuminated by solar radiation, it is possible to obtain the appropriate cell spectral response directly, and the flash tests can be combined with prolonged PV-cell irradiation on large surfaces (up to 150cm{sup 2}), so the thermal response of the PV cell can be evaluated simultaneously. (author)

  20. Optimization of the emitter region and the metal grid of a concentrator silicon solar cell

    Institute of Scientific and Technical Information of China (English)

    Xing Yupeng; Han Peide; Fan Yujie; Wang Shuai; Liang Peng; Ye Zhou; Hu Shaoxu

    2013-01-01

    The optimizations of the emitter region and the metal grid of a concentrator silicon solar cell are illustrated.The optimizations are done under 1 sun,100 suns and 200 suns using the 2D numerical simulation tool TCAD software.The optimum finger spacing and its range decrease with the increase in sheet resistance and concentration ratio.The processes of the diffusion and oxidization in the manufacture flow of the silicon solar cells were simulated to get a series of typical emitter dopant profiles to optimize.The efficiency of the solar cell under 100 suns and 200 suns increased with the decrease in diffusion temperature and the increase in oxidation temperature and time when the diffusion temperature is lower than or equal to 865 ℃.The effect of sheet resistance of the emitter on series resistance and the conversion efficiency of the solar cell under concentration was discussed.

  1. Concepts for thin-film GaAs concentrator cells. [for solar photovoltaic space power systems

    Science.gov (United States)

    Spitzer, M. B.; Gale, R. P.; Mcclelland, R.; King, B.; Dingle, J.

    1989-01-01

    The development of advanced GaAs concentrator solar cells, and in particular, the use of CLEFT (cleavage of lateral epitaxial films for transfer) processes for formation of thin-film structures is reported. The use of CLEFT has made possible processing of the back, and cells with back surface grids are discussed. Data on patterned junction development are presented; such junctions are expected to be useful in back surface applications requiring point contacts, grating structures, and interdigitated back contacts. CLEFT concentrator solar cells with grids on the front and back surfaces are reported here; these cells are 4 microns thick and are bonded to glass covers for support. Air mass zero efficiency of 18.8 percent has been obtained for a CLEFT concentrator operating at 18.5 suns.

  2. Plateletpheresis concentrates produced with the COMTEC cell separator: the French experience.

    Science.gov (United States)

    Coffe, C; Benguella, M; Domy, M; Cottier, D; Guignier, F; N'gondara, J P; Carrère, A; Masse, M; Naegelen, C; Biggio, B; Tiberghien, P; Hervè, P; Bouzgarrou, R; Maurel, J P; Vezon, G; Vidal, M; Quainon, F; Benamara, A; Lamy, B; Beaumont, J L; Bierling, P; Gondrexon, G; Schooneman, F; Janot, C; Villard, F; Huart, J J

    2001-08-01

    The latest generation of cell separators such as Trima (Gambro), Amicus (Baxter) and AS-TEC 204 (Fresenius), allow the collection of leucocyte-reduced platelet concentrates without secondary filtration. Fresenius has recently developed the COMTEC cell separator whose performance has been evaluated by several teams in France. This new cell separator is an improved version of the Fresenius AS-TEC 204 cell separator, designed to allow more efficient platelet collections. This study reports on the experience of six French teams (from Bordeaux, Clermont-Ferrand, Creteil, Dijon, Lille and Nancy) who obtained 696 leucocyte-reduced plateletpheresis concentrates in the course of collection using the new Fresenius COMTEC cell separator. All healthy volunteer donors fulfilled French selection criteria for platelet apheresis. Donors were eligible if they had suitable venous accesses, if their bodyweight was *50 kg and if their pre-apheresis platelet count was >150 x 10(9) l(-1). Between 4606 and 5229 ml of blood were processed. The mean volume of the platelet concentrates was between 439 and 493 ml (mean 460 +/- 63 ml). The platelet yield was of the order of 5.18 +/- 1.02 x 10(11) with only one platelet concentrate below the norm of 2 x 10(11) platelets (0.91 x 10(11)). No plausible explanation for this was found. The residual leucocyte levels conform to current norms. The platelet concentrates contained less than 1 x 10(6) leucocytes per concentrate (mean 0.233 +/- 0.150 x 10(6) leucocytes) in more than 97% of the components produced with >95% statistical confidence. The efficacy of the cell separator (52.44 +/- 7.35%) is comparable to that of other separators. The Fresenius COMTEC cell separator makes it possible to obtain leucocyte-reduced platelet concentrates which comply with current standards both in terms of platelet content and residual leucocyte level.

  3. Electrochemical treatment of reverse osmosis concentrate on boron-doped electrodes in undivided and divided cell configurations.

    Science.gov (United States)

    Bagastyo, Arseto Y; Batstone, Damien J; Kristiana, Ina; Escher, Beate I; Joll, Cynthia; Radjenovic, Jelena

    2014-08-30

    An undivided electrolytic cell may offer lower electrochlorination through reduction of chlorine/hypochlorite at the cathode. This study investigated the performance of electrooxidation of reverse osmosis concentrate using boron-doped diamond electrodes in membrane-divided and undivided cells. In both cell configurations, similar extents of chemical oxygen demand and dissolved organic carbon removal were obtained. Continuous formation of chlorinated organic compounds was observed regardless of the membrane presence. However, halogenation of the organic matter did not result in a corresponding increase in toxicity (Vibrio fischeri bioassay performed on extracted samples), with toxicity decreasing slightly until 10AhL(-1), and generally remaining near the initial baseline-toxicity equivalent concentration (TEQ) of the raw concentrate (i.e., ∼2mgL(-1)). The exception was a high range toxicity measure in the undivided cell (i.e., TEQ=11mgL(-1) at 2.4AhL(-1)), which rapidly decreased to 4mgL(-1). The discrepancy between the halogenated organic matter and toxicity patterns may be a consequence of volatile and/or polar halogenated by-products formed in oxidation by OH electrogenerated at the anode. The undivided cell exhibited lower energy compared to the divided cell, 0.25kWhgCOD(-1) and 0.34kWhgCOD(-1), respectively, yet it did not demonstrate any improvement regarding by-products formation.

  4. High-concentration-gradient dispersion in porous media : experiments, analysis and approximations

    NARCIS (Netherlands)

    R.J. Schotting; H. Moser; S.M. Hassanizadeh

    1997-01-01

    textabstractVarious experimental and theoretical studies have shown that Fick's law, based on the assumption of a linear relation between solute dispersive mass flux and concentration gradient, is not valid when high concentration gradients are encountered in a porous medium. The value of the macrod

  5. Critical phenomena in ethylbenzene oxidation in acetic acid solution at high cobalt(II) concentrations

    NARCIS (Netherlands)

    Gavrichkov, AA; Zakharov, [No Value

    2005-01-01

    Critical phenomena in ethylbenzene oxidation in an acetic acid solution at high cobalt(ill) concentrations (from 0.01 to 0.2 mol L-1) were studied at 60-90 degrees C by the gasometric (O-2 absorption), spectrophotometric (Co-III accumulation), and chemiluminescence (relative concentration of radical

  6. Whey protein particles modulate mechanical properties of gels at high protein concentrations

    NARCIS (Netherlands)

    Saglam, D.; Venema, P.; Vries, de R.J.; Berg, van den L.; Linden, van der E.

    2014-01-01

    We have studied the influence of dense whey protein particles on the mechanical properties of whey protein isolate (WPI) gels at high protein concentrations (16–22% (w/w)). Incorporation of dense whey protein particles in the gel, while keeping the total protein concentration constant, leads to a co

  7. Rheology of dilute acid hydrolyzed corn stover at high solids concentration

    Science.gov (United States)

    M.R. Ehrhardt; T.O. Monz; T.W. Root; R.K. Connelly; Tim Scott; D.J. Klingenberg

    2010-01-01

    The rheological properties of acid hydrolyzed corn stover at high solids concentration (20–35 wt.%) were investigated using torque rheometry. These materials are yield stress fluids whose rheological properties can be well represented by the Bingham model. Yield stresses increase with increasing solids concentration and decrease with increasing hydrolysis reaction...

  8. Effect of dissolved oxygen concentration on the bioflocculation process in high loaded MBRs

    NARCIS (Netherlands)

    Faust, L.; Temmink, B.G.; Zwijnenburg, A.; Kemperman, A.J.B.; Rijnaarts, H.

    2014-01-01

    High-loaded membrane bioreactors (HL-MBRs), i.e. MBRs which are operated at extremely short sludge and hydraulic retention times, can be applied to flocculate and concentrate sewage organic matter. The concentrated organics can be used for energy recovery, or for the production of more valuable

  9. Photosensitizer fluorescence dynamics at its diffusion in blood flow for different means of cells concentrations

    Science.gov (United States)

    Maryakhina, V. S.; Gun'kov, V. V.

    2016-04-01

    In the paper the mathematical model of kinetics of interaction of the injected compound with biological liquid flow has been described for different means of cells concentrations connected on packed cell volume. It is considered that biological liquid contains a three phases such as water, peptides and cells. At the time, the injected compound can interact with peptides and cells which are "trap" for him. The obtained distribution of the compound connects on changes of its fluorescence spectra. It is shown that fluorescence intensivity change is different at 560, 580 and 590 nm. The curves do not have monotonic nature. There is a sharp curves decline in the first few seconds, next, it are increasing. Curves inflection time slightly depends on the cells concentration and is 7-9 seconds. At the time stationary concentration significantly depends on this parameter in contrast to blood viscosity. As long s cells concentration is primarily mean of the packed cell volume, the model can be important for pharmacokinetics and preparations delivery. It can be also used for fluorescent biomedical diagnostics of cancer tumour.

  10. Juice of Bryophyllum pinnatum (Lam.) inhibits oxytocin-induced increase of the intracellular calcium concentration in human myometrial cells.

    Science.gov (United States)

    Simões-Wüst, A P; Grãos, M; Duarte, C B; Brenneisen, R; Hamburger, M; Mennet, M; Ramos, M H; Schnelle, M; Wächter, R; Worel, A M; von Mandach, U

    2010-10-01

    The use of preparations from Bryophyllum pinnatum in tocolysis is supported by both clinical (retrospective comparative studies) and experimental (using uterus strips) evidence. We studied here the effect of B. pinnatum juice on the response of cultured human myometrial cells to stimulation by oxytocin, a hormone known to be involved in the control of uterine contractions by increasing the intracellular free calcium concentration ([Ca2+]i). In this work, [Ca2+]i was measured online during stimulation of human myometrial cells (hTERT-C3 and M11) with oxytocin, which had been pre-incubated in the absence or in the presence of B. pinnatum juice. Since no functional voltage-gated Ca2+ channels could be detected in these myometrial cells, the effect of B. pinnatum juice was as well studied in SH-SY5Y neuroblastoma cells, which are known to have such channels and can be depolarised with KCl. B. pinnatum juice prevented the oxytocin-induced increase in [Ca2+]i in hTERT-C3 human myometrial cells in a dose-dependent manner, achieving a ca. 80% inhibition at a 2% concentration. Comparable results were obtained with M11 human primary myometrial cells. In hTERT-C3 cells, prevention of the oxytocin-induced increase in [Ca2+]i was independent of the extracellular Ca2+ concentration and of voltage-dependent Ca2+-channels. B. pinnatum juice delayed, but did not prevent the depolarization-induced increase in [Ca2+]i in SH-SY5Y cells. Taken together, the data suggest a specific and concentration-dependent effect of B. pinnatum juice on the oxytocin signalling pathway, which seems to corroborate its use in tocolysis. Such a specific mechanism would explain the rare and minor side-effects in tocolysis with B. pinnatum as well as its high therapeutic index.

  11. A High-Efficiency Refractive Secondary Solar Concentrator for High Temperature Solar Thermal Applications

    Science.gov (United States)

    Piszczor, Michael F., Jr.; Macosko, Robert P.

    2000-01-01

    A refractive secondary solar concentrator is a non-imaging optical device that accepts focused solar energy from a primary concentrator and redirects that light, by means of refraction and total internal reflection (TIR) into a cavity where the solar energy is used for power and/or propulsion applications. This concept offers a variety of advantages compared to typical reflective secondary concentrators (or the use of no secondary at all): higher optical efficiency, minimal secondary cooling requirements, a smaller cavity aperture, a reduction of outgassing from the cavity and flux tailoring of the solar energy within the heat receiver. During the past 2 years, NASA Lewis has been aggressively developing this concept in support of the NASA Marshall Shooting Star Flight Experiment. This paper provides a brief overview of the advantages and technical challenges associated with the development of a refractive secondary concentrator and the fabrication of a working unit in support of the flight demonstration program.

  12. Thiolated pyrimidine nucleotides may interfere thiol groups concentrated at lipid rafts of HIV-1 infected cells.

    Science.gov (United States)

    Kanizsai, Szilvia; Ongrádi, Joseph; Aradi, János; Nagy, Károly

    2014-12-01

    Upon HIV infection, cells become activated and cell surface thiols are present in increased number. Earlier we demonstrated in vitro anti-HIV effect of thiolated pyrimidine nucleotide UD29, which interferes thiol function. To further analyse the redox processes required for HIV-1 entry and infection, toxicity assays were performed using HIV-1 infected monolayer HeLaCD4-LTR/ β-gal cells and suspension H9 T cells treated with several thiolated nucleotide derivatives of UD29. Selective cytotoxicity of thiolated pyrimidines on HIV-1 infected cells were observed. Results indicate that thiolated pyrimidine derivates may interfere with -SH (thiol) groups concentrated in lipid rafts of cell membrane and interacts HIV-1 infected (activated) cells resulting in a selective cytotoxicity of HIV-1 infected cells, and reducing HIV-1 entry.

  13. Investigating cold gelation properties of recombined highly concentrated micellar casein concentrate and cream for use in cheese making.

    Science.gov (United States)

    Lu, Y; McMahon, D J; Vollmer, A H

    2016-07-01

    Highly concentrated micellar casein concentrate (HC-MCC), a potential ingredient for cheese making, contains ~20% casein with ~70% of serum proteins removed by microfiltration and diafiltration of skim milk, followed by vacuum evaporation. Our objective was to investigate cold gelation properties of recombined concentrated milk (RCM) by mixing thawed frozen HC-MCC and cream under different casein levels, pH, and protein-to-fat ratios, and with addition of sodium citrate or calcium. The HC-MCC was recombined with cream using low shear at 50°C for 30 min, and rheological measurements were conducted. Cold-gelling temperature [the temperature at which storage modulus (G')=loss modulus (G″)] was linearly correlated with casein levels from 8.6 to 11.5% (R(2)=0.71), pH from 6.6 to 7.0 (R(2)=0.96), and addition of sodium citrate from 0 to 0.36mmol/g of casein (R(2)=0.80). At pH 7.0, gelation occurred at 12, 26, and 38°C with 9, 10, and 11% casein, respectively. At pH 6.6, 6.8, and 7.0, RCM with 12% casein gelled at a mean temperature of 12, 26, and 37°C, respectively. Adding calcium chloride at 0.17mmol/g of casein significantly increased cold-gelling temperature from 18 to ≥50°C, whereas no significant change was observed at levels up to 0.12mmol/g of casein. Different protein to fat ratios ranging from 0.8 to 1.2 did not significantly influence gelling temperature. In transmission electron micrographs of RCM with 12% casein, casein micelles were nonspherical and partially dissociated into small protein strands. Upon addition of calcium chloride at 0.21mmol/g of casein, casein micelles were more spherical and retained colloidal structure with the presence of aggregated casein micelles. These gelation processes of RCM with or without addition of trisodium citrate were both reversible. We propose that cold gelation of RCM occurs when protein strands that have been partially released from the casein micelles entangle, restrict their mobility, and form a fine

  14. Silicon Based Photovoltaic Cells For Concentration-Research And Development Progress In Laser Grooved Buried Contact Cell Technology

    Science.gov (United States)

    Cole, A.; Baistow, I.; Brown, L.; Devenport, S.; Drew, K.; Heasman, K. C.; Morrison, D.; Bruton, T. M.; Serenelli, L.; De Iuliis, S.; Izzi, M.; Tucci, M.; Salza, E.; Pirozzi, L.

    2011-12-01

    The Laser grooved buried contact silicon solar cell (LGBC) process employed by Narec currently produces LGBC cells designed to operate at concentrations ranging from 1-100 suns and has demonstrated efficiencies at 50X of over 19% and at 100X of over 18.2% using 300 μm CZ silicon[1] wafers. As part of the LAB2LINE[1], APOLLON[2] and ASPIS[3] projects funded under the European Commission Framework Programs (FP6 and FP7) we have made improvements to the LGBC process to improve efficiency or make the cell technology more suitable for industrial CPV receiver manufacturing processes. We describe a process which hybridizes LGBC and more standard screen printing technologies which yields at least a 6% relative improvement at concentration when using more readily available 200 μm thick CZ wafers. We describe a pioneering front dicing technique (FDT). The FDT process is important in small cells where edge recombination effects are detrimental to the performance. We show that by using this new technique we can produce cells that perform better at concentration and improve the positioning of the front contact of the cell. We also describe a busbar technology that uses laser processing and electroless chemical plating to allow not only soldering to the front contact of the cell but also wire bonding. The advances in research and development of LGBC cells leading to improved cell performance may provide significant reductions in levilised cost of energy (LCOE) for low to medium CPV systems.

  15. InGaN High-Temperature Photovoltaic Cells

    Science.gov (United States)

    Starikov, David

    2015-01-01

    This Phase II project developed Indium-Gallium-Nitride (InGaN) photovoltaic cells for high-temperature and high-radiation environments. The project included theoretical and experimental refinement of device structures produced in Phase I as well as modeling and optimization of solar cell device processing. The devices have been tested under concentrated air mass zero (AM0) sunlight, at temperatures from 100 degC to 250 degC, and after exposure to ionizing radiation. The results are expected to further verify that InGaN can be used for high-temperature and high-radiation solar cells. The large commercial solar cell market could benefit from the hybridization of InGaN materials to existing solar cell technology, which would significantly increase cell efficiency without relying on highly toxic compounds. In addition, further development of this technology to even lower bandgap materials for space applications would extend lifetimes of satellite solar cell arrays due to increased radiation hardness. This could be of importance to the Departmentof Defense (DoD) and commercial satellite manufacturers.

  16. Potassium double tungstate waveguides with high ytterbium concentration for optical amplification

    NARCIS (Netherlands)

    Yong, Yean-Sheng

    2017-01-01

    In this thesis, the research work concerning high ytterbium concentration potassium double tungstate waveguides catered for optical amplification purpose is presented. The scope of the research work includes the investigation of spectroscopic and optical gain properties in epitaxy layers with

  17. Methods to assess high-resolution subsurface gas concentrations and gas fluxes in wetland ecosystems

    DEFF Research Database (Denmark)

    Elberling, Bo; Kühl, Michael; Glud, Ronnie N.

    2013-01-01

    The need for measurements of soil gas concentrations and surface fluxes of greenhouse gases at high temporal and spatial resolution in wetland ecosystem has lead to the introduction of several new analytical techniques and methods. In addition to the automated flux chamber methodology for high......-resolution estimates of greenhouse gas fluxes across the soil-atmosphere interface, these high-resolution methods include microsensors for quantification of spatiotemporal concentration dynamics in O2 and N2O at micrometer scales, fiber-optic optodes for long-term continuous point measurements of O2 concentrations...... and peat soils are highly heterogeneous, containing a mosaic of dynamic macropore systems created by both macrofauna and flora leading to distinct spatial and temporal variations in gas concentration on a scale of millimeters and minutes. Applications of these new methodologies allow measurements...

  18. Fungal spore concentrations in two haematopoietic stem cell transplantation (HSCT) units containing distinct air control systems.

    Science.gov (United States)

    Brun, C P; Miron, D; Silla, L M R; Pasqualotto, A C

    2013-04-01

    Invasive fungal diseases have emerged as important causes of morbidity and mortality in haematological patients. In this study air samples were collected in two haematopoietic stem cell transplantation (HSCT) units, in which distinct air-control systems were in place. In hospital 1 no high-efficiency particulate air (HEPA) filter was available whereas in hospital 2 HSCT rooms were equipped with HEPA filters, with positive air pressure in relation to the corridor. A total of 117 samples from rooms, toilets and corridors were obtained during December 2009 to January 2011, using a six-stage Andersen sampler. In both hospitals, the concentration of potentially pathogenic fungi in the air was reduced in patients' rooms compared to corridors (P < 0·0001). Despite the presence of a HEPA filter in hospital 2, rooms in both hospitals showed similar concentrations of potentially pathogenic fungi (P = 0·714). These findings may be explained by the implementation of additional protective measures in hospital 1, emphasizing the importance of such measures in protected environments.

  19. Effects of synthetic A3 adenosine receptor agonists on cell proliferation and viability are receptor independent at micromolar concentrations.

    Science.gov (United States)

    Mlejnek, Petr; Dolezel, Petr; Frydrych, Ivo

    2013-09-01

    The question as to whether A3 adenosine receptor (A3AR) agonists, N (6)-(3-iodobenzyl)-adenosine-5'-N- methyluronamide (IB-MECA) and 2-chloro-N (6)-(3-iodobenzyl)-adenosine-5'-N-methyluronamide (Cl-IB-MECA), could exert cytotoxic effects at high concentrations with or without the involvement of A3AR has been a controversial issue for a long time. The initial findings suggesting that A3AR plays a crucial role in the induction of cell death upon treatment with micromolar concentrations of IB-MECA or Cl-IB-MECA were revised, however, the direct and unequivocal evidence is still missing. Therefore, the sensitivity of Chinese hamster ovary (CHO) cells transfected with human recombinant A3AR (A3-CHO) and their counter partner wild-type CHO cells, which do not express any of adenosine receptors, to micromolar concentrations of IB-MECA and Cl-IB-MECA was studied. We observed that IB-MECA and Cl-IB-MECA exhibited a strong inhibitory effect on cell proliferation due to the blockage of cell cycle progression at G1/S and G2/M transitions in both A3-CHO and CHO cells. Further analysis revealed that IB-MECA and Cl-IB-MECA attenuated the Erk1/2 signalling irrespectively to A3AR expression. In addition, Cl-IB-MECA induced massive cell death mainly with hallmarks of a necrosis in both cell lines. In contrast, IB-MECA affected cell viability only slightly independently of A3AR expression. IB-MECA induced cell death that exhibited apoptotic hallmarks. In general, the sensitivity of A3-CHO cells to micromolar concentrations of IB-MECA and Cl-IB-MECA was somewhat, but not significantly, higher than that observed in the CHO cells. These results strongly suggest that IB-MECA and Cl-IB-MECA exert cytotoxic effects at micromolar concentrations independently of A3AR expression.

  20. Platelet lysates produced from expired platelet concentrates support growth and osteogenic differentiation of mesenchymal stem cells.

    Directory of Open Access Journals (Sweden)

    Sandra Mjoll Jonsdottir-Buch

    Full Text Available BACKGROUND: Mesenchymal stem cells are promising candidates in regenerative cell therapy. Conventional culture methods involve the use of animal substances, specifically fetal bovine serum as growth supplement. Since the use of animal-derived products is undesirable for human applications, platelet lysates produced from human platelets are an attractive alternative. This is especially true if platelet lysates from already approved transfusion units at blood banks can be utilized. The purpose of this study was to produce human platelet lysates from expired, blood bank-approved platelet concentrates and evaluate their use as growth supplement in the culture of mesenchymal stem cells. METHODOLOGY/PRINCIPAL FINDINGS: In this study, bone marrow-derived mesenchymal stem cells were cultured with one of three culture supplements; fetal bovine serum, lysates from freshly prepared human platelet concentrates, or lysates from expired human platelet concentrates. The effects of these platelet-derived culture supplements on basic mesenchymal stem cell characteristics were evaluated. All cultures maintained the typical mesenchymal stem cell surface marker expression, trilineage differentiation potential, and the ability to suppress in vitro immune responses. However, mesenchymal stem cells supplemented with platelet lysates proliferated faster than traditionally cultured cells and increased the expression of the osteogenic marker gene RUNX-2; yet no difference between the use of fresh and expired platelet concentrates was observed. CONCLUSION/SIGNIFICANCE: Our findings suggest that human platelet lysates produced from expired platelet concentrates can be used as an alternative to fetal bovine serum for mesenchymal stem cell culture to the same extent as lysates from fresh platelets.

  1. Concentration influences on recovery in a high gradient magnetic separation axial filter

    Energy Technology Data Exchange (ETDEWEB)

    Murariu, V.; Rezlescu, N.; Rotariu, O.; Badescu, V. [Inst. of Technical Physics, Iasi (Romania)

    1998-05-01

    The buildup differential equations for the case of a single wire in high gradient magnetic filtration (HGMF)-axial configuration taking into account the suspension concentration are solved. A new equation for the deposit contour surface at different moments and for different suspension concentrations are obtained. The existence of a particulate suspension concentration, for which the radial extension velocity of deposit is maximum, is evidenced. The recovery for an ordered ferromagnetic matrix is calculated. The influence of the solid particle concentration from suspension on the filtration efficiency is presented.

  2. A novel high reliability CMOS SRAM cell

    Institute of Scientific and Technical Information of China (English)

    Xie Chengmin; Wang Zhongfang; Wu Longsheng; Liu Youbao

    2011-01-01

    A novel 8T single-event-upset (SEU) hardened and high static noise margin (SNM) SRAM cell is proposed.By adding one transistor paralleled with each access transistor,the drive capability of pull-up PMOS is greater than that of the conventional cell and the read access transistors are weaker than that of the conventional cell.So the hold,read SNM and critical charge increase greatly.The simulation results show that the critical charge is almost three times larger than that of the conventional 6T cell by appropriately sizing the pull-up transistors.The hold and read SNM of the new cell increase by 72% and 141.7%,respectively,compared to the 6T design,but it has a 54% area overhead and read performance penalty.According to these features,this novel cell suits high reliability applications,such as aerospace and military.

  3. Subcutaneous absorption kinetics of two highly concentrated preparations of recombinant human growth hormone

    DEFF Research Database (Denmark)

    Laursen, Torben; Jørgensen, Jens Otto Lunde; Susgaard, Søren;

    1993-01-01

    Abstract OBJECTIVE: The relative bioavailability of two highly concentrated (12 IU/ml) formulations of biosynthetic human growth hormone (GH) administered subcutaneously was compared. DESIGN: A randomized, crossover study. Conventional GH therapy was withdrawn 72 hours before each study period. T....... CONCLUSIONS: There is no significant difference between the absorption kinetics and short-term metabolic effects of these two highly concentrated formulations of biosynthetic GH. The two formulations are bioequivalent....

  4. Effect of various concentrations of Ti in hydrocarbon plasma polymer films on the adhesion, proliferation and differentiation of human osteoblast-like MG-63 cells

    Energy Technology Data Exchange (ETDEWEB)

    Vandrovcova, Marta, E-mail: marta.vandrovcova@fgu.cas.cz [Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague 4 (Czech Republic); Grinevich, Andrey; Drabik, Martin; Kylian, Ondrej; Hanus, Jan [Department of Macromolecular Physics, Faculty of Mathematics and Physics, Charles University, V Holesovickach 2, 182 00 Prague 8 (Czech Republic); Stankova, Lubica; Lisa, Vera [Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague 4 (Czech Republic); Choukourov, Andrei; Slavinska, Danka; Biederman, Hynek [Department of Macromolecular Physics, Faculty of Mathematics and Physics, Charles University, V Holesovickach 2, 182 00 Prague 8 (Czech Republic); Bacakova, Lucie [Department of Biomaterials and Tissue Engineering, Institute of Physiology of the Czech Academy of Sciences, Videnska 1083, 142 20 Prague 4 (Czech Republic)

    2015-12-01

    Graphical abstract: - Highlights: • Hydrocarbon plasma polymer films with Ti in concentration of 0–20 at.% were prepared. • The Ti concentration was positively correlated with the material surface wettability. • The optimum Ti concentrations for the MG-63 cells behavior were identified. • The Ti concentration also influenced the cell immune activation. - Abstract: Hydrocarbon polymer films (ppCH) enriched with various concentrations of titanium were deposited on microscopic glass slides by magnetron sputtering from a Ti target. The maximum concentration of Ti (about 20 at.%) was achieved in a pure argon atmosphere. The concentration of Ti decreased rapidly after n-hexane vapors were introduced into the plasma discharge, and reached zero values at n-hexane flow of 0.66 sccm. The decrease in Ti concentration was associated with decreasing oxygen and titanium carbide concentration in the films, decreasing wettability (the water drop contact angle increased from 20° to 91°) and decreasing root-mean-square roughness (from 3.3 nm to 1.0 nm). The human osteoblast-like MG-63 cells cultured on pure ppCH films and on films with 20 at.% of Ti showed relatively high concentrations of ICAM-1, a marker of cell immune activation. Lower concentrations of Ti (mainly 5 at.%) improved cell adhesion and osteogenic differentiation, as revealed by higher concentrations of talin, vinculin and osteocalcin. Higher Ti concentrations (15 at.%) supported cell growth, as indicated by the highest final cell population densities on day 7 after seeding. Thus, enrichment of ppCH films with appropriate concentrations of Ti makes these films more suitable for potential coatings of bone implants.

  5. Energy Yield Determination of Concentrator Solar Cells using Laboratory Measurements: Preprint

    Energy Technology Data Exchange (ETDEWEB)

    Geisz, John F.; Garcia, Ivan; McMahon, William E.; Steiner, Myles A.; Ochoa, Mario; France, Ryan M.; Habte, Aron; Friedman, Daniel J.

    2015-09-14

    The annual energy conversion efficiency is calculated for a four junction inverted metamorphic solar cell that has been completely characterized in the laboratory at room temperature using measurements fit to a comprehensive optoelectronic model of the multijunction solar cells. A simple model of the temperature dependence is used to predict the performance of the solar cell under varying temperature and spectra characteristic of Golden, CO for an entire year. The annual energy conversion efficiency is calculated by integrating the predicted cell performance over the entire year. The effects of geometric concentration, CPV system thermal characteristics, and luminescent coupling are highlighted. temperature and spectra characteristic of Golden, CO for an entire year. The annual energy conversion efficiency is calculated by integrating the predicted cell performance over the entire year. The effects of geometric concentration, CPV system thermal characteristics, and luminescent coupling are highlighted.

  6. Analyzing luminescent solar concentrators with front-facing photovoltaic cells using weighted Monte Carlo ray tracing

    Science.gov (United States)

    Woei Leow, Shin; Corrado, Carley; Osborn, Melissa; Isaacson, Michael; Alers, Glenn; Carter, Sue A.

    2013-06-01

    Luminescent solar concentrators (LSC) collect ambient light from a broad range of angles and concentrate the captured light onto photovoltaic (PV) cells. LSCs with front-facing cells collect direct and indirect sunlight ensuring a gain factor greater than one. The flexible placement and percentage coverage of PV cells on the LSC panel allow for layout adjustments to be made in order to balance re-absorption losses and the level of light concentration desired. A weighted Monte Carlo ray tracing program was developed to study the transport of photons and loss mechanisms in the LSC to aid in design optimization. The program imports measured absorption/emission spectra of an organic luminescent dye (LR305), the transmission coefficient, and refractive index of acrylic as parameters that describe the system. Simulations suggest that for LR305, 8-10 cm of luminescent material surrounding the PV cell yields the highest increase in power gain per unit area of LSC added, thereby determining the ideal spacing between PV cells in the panel. For rectangular PV cells, results indicate that for each centimeter of PV cell width, an additional increase of 0.15 mm to the waveguide thickness is required to efficiently transport photon collected by the LSC to the PV cell with minimal loss.

  7. Incomplete ion dissociation underlies the weakened attraction between DNA helices at high spermidine concentrations.

    Science.gov (United States)

    Yang, Jie; Rau, Donald C

    2005-09-01

    We have investigated the salt sensitivity of the hexagonal-to-cholesteric phase transition of spermidine-condensed DNA. This transition precedes the resolubilization of precipitated DNA that occurs at high spermidine concentration. The sensitivity of the critical spermidine concentration at the transition point to the anion species and the NaCl concentration indicates that ion pairing of this trivalent ion underlies this unusual transition. Osmotic pressure measurements of spermidine salt solutions are consistent with this interpretation. Spermidine salts are not fully dissociated at higher concentrations. The competition for DNA binding among the fully charged trivalent ion and the lesser charged complex species at higher concentrations significantly weakens attraction between DNA helices in the condensed state. This is contrary to the suggestion that the binding of spermidine at higher concentrations causes DNA overcharging and consequent electrostatic repulsion.

  8. Achieving High Performance Perovskite Solar Cells

    Science.gov (United States)

    Yang, Yang

    2015-03-01

    Recently, metal halide perovskite based solar cell with the characteristics of rather low raw materials cost, great potential for simple process and scalable production, and extreme high power conversion efficiency (PCE), have been highlighted as one of the most competitive technologies for next generation thin film photovoltaic (PV). In UCLA, we have realized an efficient pathway to achieve high performance pervoskite solar cells, where the findings are beneficial to this unique materials/devices system. Our recent progress lies in perovskite film formation, defect passivation, transport materials design, interface engineering with respect to high performance solar cell, as well as the exploration of its applications beyond photovoltaics. These achievements include: 1) development of vapor assisted solution process (VASP) and moisture assisted solution process, which produces perovskite film with improved conformity, high crystallinity, reduced recombination rate, and the resulting high performance; 2) examination of the defects property of perovskite materials, and demonstration of a self-induced passivation approach to reduce carrier recombination; 3) interface engineering based on design of the carrier transport materials and the electrodes, in combination with high quality perovskite film, which delivers 15 ~ 20% PCEs; 4) a novel integration of bulk heterojunction to perovskite solar cell to achieve better light harvest; 5) fabrication of inverted solar cell device with high efficiency and flexibility and 6) exploration the application of perovskite materials to photodetector. Further development in film, device architecture, and interfaces will lead to continuous improved perovskite solar cells and other organic-inorganic hybrid optoelectronics.

  9. EXPERIMENTAL INVESTIGATIONS ON DIFFUSION CHARACTERISTICS OF HIGH CONCENTRATION JETS IN ENVIRONMENTAL CURRENTS

    Institute of Scientific and Technical Information of China (English)

    张燕; 王道增; 樊靖郁

    2002-01-01

    By means of flow visualization and quantitative measurement, the diffusionpattern and concentration distribution characteristics of high concentration jets verticallydischarged into shallow moving waterbody were experimentally investigated in waterchannel. The interactions between the high concentration jets and environmental flowconditions were analysed, and the formulae of impinging point coordinate and transversespread angle are gained from data analysis. Experimental results indicate that the jets showcomplicated flow patterns and diffusion characteristics in near region, which are differentfrom common submerged jets, and spread downstream in the manner of density currents.

  10. Performance of 500 m3 TankCell® at Kevitsa Cu-Ni-PGM concentrator

    Directory of Open Access Journals (Sweden)

    Mattsson Toni

    2016-01-01

    Full Text Available Outotec TankCell e500 flotation cell, with 500 m3 of efficient flotation volume, has been in operation since October 2014 at Kevitsa Cu-Ni-PGM concentrator as the first Cu rougher flotation cell. The 500 m3 flotation cell has proven to provide metallurgical superiority at very low specific power. On average the cell has recovered 71% of copper contained in the flotation feed. The cell has produced the concentrate with the Cu grade equal to 17% Cu. The typical specific power for the cell is around 0.4 kW/m3 (blower power not included. After the start-up of the cell the operating parameters have varied. The mixing speed have varied from 4.9 to 7.0 m/s and the superficial gas velocity from 0.3 to 1.5 cm/s. At various operating parameters the mixing, gas dispersion and metallurgical performance of the cell have been evaluated. In this paper a review of the hydrodynamic and metallurgical performance of the cell is presented. The paper focuses on the interactions of mixing intensity, bubble size and metallurgical performance in industrial application.

  11. Confinement dependent chemotaxis in two-photon polymerized linear migration constructs with highly definable concentration gradients

    DEFF Research Database (Denmark)

    Hjortø, Gertrud Malene; Olsen, Mark Holm; Svane, Inge Marie

    2015-01-01

    Dendritic cell chemotaxis is known to follow chemoattractant concentration gradients through tissue of heterogeneous pore sizes, but the dependence of migration velocity on pore size and gradient steepness is not fully understood. We enabled chemotaxis studies for at least 42 hours at confinement...

  12. The survival of cultured mouse cerebellar granule cells is not dependent on elevated potassium-ion concentration

    DEFF Research Database (Denmark)

    Mogensen, Helle Smidt; Hack, N; Balázs, R

    1994-01-01

    The effects of K(+)-induced membrane depolarization were studied on the survival and biochemical parameters in mouse and rat cerebellar granule cells grown in micro-well cultures. Cell numbers were determined by estimating DNA content using the Hoechst 33258 fluorochrome binding assay. DNA from d...... that although cultivation in 'high' K+ promotes biochemical differentiation in mouse cerebellar granule cells, these cells differ from their rat counterparts in that they do not develop a survival requirement for K(+)-induced membrane depolarization.......The effects of K(+)-induced membrane depolarization were studied on the survival and biochemical parameters in mouse and rat cerebellar granule cells grown in micro-well cultures. Cell numbers were determined by estimating DNA content using the Hoechst 33258 fluorochrome binding assay. DNA from...... degenerated cells was removed by prior DNAase treatment. These DNA estimates of cell numbers were comparable with values obtained by direct counting of fluorescein diacetate-stained viable cells. In agreement with previous studies, the survival of rat granule cells was promoted by increasing the concentration...

  13. Temperature reduction of solar cells in a concentrator photovoltaic system using a long wavelength cut filter

    Science.gov (United States)

    Ahmad, Nawwar; Ota, Yasuyuki; Nishioka, Kensuke

    2017-03-01

    We propose a Fresnel lens optical concentration system that can reduce the solar cell temperature. For the reduction of the solar cell temperature, we added a long-wavelength cut filter in order to utilize the part of the solar spectrum that is beneficial to a solar cell while reflecting the rest of the long-wavelength spectrum. A thermal simulation was conducted to estimate the actual cell temperature for optical systems with and without the long-wavelength cut filter, and the results showed a decrease of approximately 25.3 °C in the solar cell temperature using the filter. The lifetime of a solar cell can be extended by reducing its temperature, and the results showed an increase of 1.9 × 105 h in the lifetime of the solar cell.

  14. Growth kinetics of hybridoma cells: (2) The effects of varying energy source concentrations.

    Science.gov (United States)

    Low, K; Harbour, C

    1985-01-01

    Commercial media used for the growth of hybridoma cells contain different glucose concentrations. We have attempted to establish the optimal levels of glucose required for maximum hybridoma cell yields by studying the energy source metabolism of two murine hybridoma cell lines in several commercial media in static 25 cm2 flask cultures. The glucose and lactate quotients and growth yields from glucose of the two cell lines were similar in all media. Glucose limited growth in DME containing lg/L. Glucose supplementation to 2g/L in DME significantly increased cell and antibody yields. When fructose was used as a substitute for glucose the fructose quotient of one cell line was found to be similar to its glucose quotient whereas that of the other cell line was significantly reduced compared to its glucose quotient.

  15. Boric acid solution concentration influencing p-type emitter formation in n-type crystalline Si solar cells

    Science.gov (United States)

    Singha, Bandana; Singh Solanki, Chetan

    2016-09-01

    Boric acid (BA) is a spin on dopant (BSoD) source which is used to form p+ emitters in n-type c-Si solar cells. High purity boric acid powder (99.99% pure) when mixed with deionized (DI) water can result in high quality p-type emitter with less amount of surface defects. In this work, we have used different concentrations of boric acid solution concentrations to fabricate p-type emitters with sheet resistance values < 90 Ω/□. The corresponding junction depths for the same are less than 500 nm as measured by SIMS analysis. Boron rich layer (BRL), which is considered as detrimental in emitter performance is found to be minimal for BA solution concentration less than 2% and hence useful for p-type emitter formation.

  16. Calorie Restricted High Protein Diets Downregulate Lipogenesis and Lower Intrahepatic Triglyceride Concentrations in Male Rats

    Directory of Open Access Journals (Sweden)

    Lee M. Margolis

    2016-09-01

    Full Text Available The purpose of this investigation was to assess the influence of calorie restriction (CR alone, higher-protein/lower-carbohydrate intake alone, and combined CR higher-protein/lower-carbohydrate intake on glucose homeostasis, hepatic de novo lipogenesis (DNL, and intrahepatic triglycerides. Twelve-week old male Sprague Dawley rats consumed ad libitum (AL or CR (40% restriction, adequate (10%, or high (32% protein (PRO milk-based diets for 16 weeks. Metabolic profiles were assessed in serum, and intrahepatic triglyceride concentrations and molecular markers of de novo lipogenesis were determined in liver. Independent of calorie intake, 32% PRO tended to result in lower homeostatic model assessment of insulin resistance (HOMA-IR values compared to 10% PRO, while insulin and homeostatic model assessment of β-cell function (HOMA-β values were lower in CR than AL, regardless of protein intake. Intrahepatic triglyceride concentrations were 27.4 ± 4.5 and 11.7 ± 4.5 µmol·g−1 lower (p < 0.05 in CR and 32% PRO compared to AL and 10% PRO, respectively. Gene expression of fatty acid synthase (FASN, stearoyl-CoA destaurase-1 (SCD1 and pyruvate dehydrogenase kinase, isozyme 4 (PDK4 were 45% ± 1%, 23% ± 1%, and 57% ± 1% lower (p < 0.05, respectively, in CR than AL, regardless of protein intake. Total protein of FASN and SCD were 50% ± 1% and 26% ± 1% lower (p < 0.05 in 32% PRO compared to 10% PRO, independent of calorie intake. Results from this investigation provide evidence that the metabolic health benefits associated with CR—specifically reduction in intrahepatic triglyceride content—may be enhanced by consuming a higher-protein/lower-carbohydrate diet.

  17. [Study of high temperature water vapor concentration measurement method based on absorption spectroscopy].

    Science.gov (United States)

    Chen, Jiu-ying; Liu, Jian-guo; He, Jun-feng; He, Ya-bai; Zhang, Guang-le; Xu, Zhen-yu; Gang, Qiang; Wang, Liao; Yao, Lu; Yuan, Song; Ruan, Jun; Dai, Yun-hai; Kan, Rui-feng

    2014-12-01

    Tunable diode laser absorption spectroscopy (TDLAS) has been developed to realize the real-time and dynamic measurement of the combustion temperature, gas component concentration, velocity and other flow parameters, owing to its high sensitivity, fast time response, non-invasive character and robust nature. In order to obtain accurate water vapor concentration at high temperature, several absorption spectra of water vapor near 1.39 μm from 773 to 1273 K under ordinary pressure were recorded in a high temperature experiment setup using a narrow band diode laser. The absorbance of high temperature absorption spectra was calculated by combined multi-line nonlinear least squares fitting method. Two water vapor absorption lines near 7154.35 and 7157.73 cm(-1) were selected for measurement of water vapor at high temperature. A model method for high temperature water vapor concentration was first proposed. Water vapor concentration from the model method at high temperature is in accordance with theoretical reasoning, concentration measurement standard error is less than 0.2%, and the relative error is less than 6%. The feasibility of this measuring method is verified by experiment.

  18. Electrolyte Concentration Effect of a Photoelectrochemical Cell Consisting of Nanotube Anode

    OpenAIRE

    Kai Ren; Gan, Yong X.; Efstratios Nikolaidis; Sharaf Al Sofyani; Lihua Zhang

    2013-01-01

    The photoelectrochemical responses of a TiO2 nanotube anode in ethylene glycol (EG), glycerol, ammonia, ethanol, urea, and Na2S electrolytes with different concentrations were investigated. The TiO2 nanotube anode was highly efficient in photoelectrocatalysis in these solutions under UV light illumination. The photocurrent density is obviously affected by the concentration change. Na2S generated the highest photocurrent density at 0, 1, and 2 V bias voltages, but its concentration does not si...

  19. Local modulation of chemoattractant concentrations by single cells: dissection using a bulk-surface computational model

    Science.gov (United States)

    Nolan, M.

    2016-01-01

    Chemoattractant gradients are usually considered in terms of sources and sinks that are independent of the chemotactic cell. However, recent interest has focused on ‘self-generated’ gradients, in which cell populations create their own local gradients as they move. Here, we consider the interplay between chemoattractants and single cells. To achieve this, we extend a recently developed computational model to incorporate breakdown of extracellular attractants by membrane-bound enzymes. Model equations are parametrized, using the published estimates from Dictyostelium cells chemotaxing towards cyclic AMP. We find that individual cells can substantially modulate their local attractant field under physiologically appropriate conditions of attractant and enzymes. This means the attractant concentration perceived by receptors can be a small fraction of the ambient concentration. This allows efficient chemotaxis in chemoattractant concentrations that would be saturating without local breakdown. Similar interactions in which cells locally mould a stimulus could function in many types of directed cell motility, including haptotaxis, durotaxis and even electrotaxis. PMID:27708760

  20. Acid and organic aerosol coatings on magnetic nanoparticles increase iron concentrations in human airway epithelial cells.

    Science.gov (United States)

    Ghio, Andrew J; Dailey, Lisa A; Richards, Judy H; Jang, Myoseon

    2009-07-01

    Numerous industrial applications for man-made nanoparticles have been proposed. Interactions of nanoparticles with agents in the atmosphere may impact human health. We tested the postulate that in vitro exposures of respiratory epithelial cells to airborne magnetic nanoparticles (MNP; Fe(3)O(4)) with and without a secondary organic aerosol (SOA) and an inorganic acid could affect iron homeostasis, oxidative stress, and interleukin (IL)-8 release. Cell iron concentrations were increased after exposures to MNP and values were further elevated with co-exposures to either SOA or inorganic acid. Increased expression of ferritin and elevated levels of RNA for DMT1, proteins for iron storage and transport respectively, followed MNP exposures, but values were significant for only those with co-exposures to inorganic acid and organic aerosols. Cell iron concentration corresponded to a measure of oxidative stress in the airway epithelial cells; MNP with co-exposures to SOA and inorganic acid increased both available metal and indices of oxidant generation. Finally, the release of a proinflammatory cytokine (i.e. IL-8) by the exposed cells similarly increased with cell iron concentration. We conclude that MNP can interact with a SOA and an inorganic acid to present metal in a catalytically reactive state to cultured respiratory cells. This produces an oxidative stress to affect a release of IL-8.

  1. Elevated CO2 concentration impacts cell wall polysaccharide composition of green microalgae of the genus Chlorella.

    Science.gov (United States)

    Cheng, Y-S; Labavitch, J M; VanderGheynst, J S

    2015-01-01

    The effect of CO2 concentration on the relative content of starch, lipid and cell wall carbohydrates in microalgal biomass was investigated for the four following Chlorella strains: C. vulgaris (UTEX 259), C. sorokiniana (UTEX 2805), C. minutissima (UTEX 2341) and C. variabilis (NC64A). Each strain had a different response to CO2 concentration. The starch content was higher in UTEX259 and NC64A cultured with 2% CO2 in the air supply than in cells cultured with ca. 0·04% CO2 (ambient air), while starch content was not affected for UTEX 2805 and UTEX 2341. The lipid content was higher in Chlorella minutissima UTEX 2341 cultured in 2% CO2 than in cells cultured in ambient air, but was unchanged for the other three strains. All four Chlorella strains tended to have a higher percentage of uronic acids and lower percentage of neutral sugars in their cell wall polysaccharide complement when grown with 2% CO2 supply. Although the percentage of neutral sugars in the cell walls varied with CO2 concentration, the relative proportions of different neutral sugar constituents remained constant for both CO2 conditions. The results demonstrate the importance of considering the effects of CO2 on the cell wall carbohydrate composition of microalgae. Microalgae have the potential to produce products that will reduce society's reliance on fossil fuels and address challenges related to food and feed production. An overlooked yet industrially relevant component of microalgae are their cell walls. Cell wall composition affects cell flocculation and the recovery of intracellular products. In this study, we show that increasing CO2 level results in greater cell wall polysaccharide and uronic acid content in the cell walls of three strains of microalgae. The results have implications on the management of systems for the capture of CO2 and production of fuels, chemicals and food from microalgae. © 2014 The Society for Applied Microbiology.

  2. Very High Efficiency Solar Cell Modules

    Energy Technology Data Exchange (ETDEWEB)

    Barnett, A.; Kirkpatrick, D.; Honsberg, C.; Moore, D.; Wanlass, M.; Emery, K.; Schwartz, R.; Carlson, D.; Bowden, S.; Aiken, D.; Gray, A.; Kurtz, S.; Kazmerski, L., et al

    2009-01-01

    The Very High Efficiency Solar Cell (VHESC) program is developing integrated optical system - PV modules for portable applications that operate at greater than 50% efficiency. We are integrating the optical design with the solar cell design, and have entered previously unoccupied design space. Our approach is driven by proven quantitative models for the solar cell design, the optical design, and the integration of these designs. Optical systems efficiency with an optical efficiency of 93% and solar cell device results under ideal dichroic splitting optics summing to 42.7 {+-} 2.5% are described.

  3. Trace element concentrations and gastrointestinal parasites of Arctic terns breeding in the Canadian High Arctic.

    Science.gov (United States)

    Provencher, J F; Braune, B M; Gilchrist, H G; Forbes, M R; Mallory, M L

    2014-04-01

    Baseline data on trace element concentrations are lacking for many species of Arctic marine birds. We measured essential and non-essential element concentrations in Arctic tern (Sterna paradisaea) liver tissue and brain tissue (mercury only) from Canada's High Arctic, and recorded the presence/absence of gastrointestinal parasites during four different phases of the breeding season. Arctic terns from northern Canada had similar trace element concentrations to other seabird species feeding at the same trophic level in the same region. Concentrations of bismuth, selenium, lead and mercury in Arctic terns were high compared to published threshold values for birds. Selenium and mercury concentrations were also higher in Arctic terns from northern Canada than bird species sampled in other Arctic areas. Selenium, mercury and arsenic concentrations varied across the time periods examined, suggesting potential regional differences in the exposure of biota to these elements. For unknown reasons, selenium concentrations were significantly higher in birds with gastrointestinal parasites as compared to those without parasites, while bismuth concentrations were higher in Arctic terns not infected with gastrointestinal parasites.

  4. Photodynamic treatment of red blood cell concentrates for virus inactivation enhances red blood cell aggregation: protection with antioxidants.

    Science.gov (United States)

    Ben-Hur, E; Barshtein, G; Chen, S; Yedgar, S

    1997-10-01

    Photodynamic treatment (PDT) using phthalocyanines and red light appears to be a promising procedure for decontamination of red blood cell (RBC) concentrates for transfusion. A possible complication of this treatment may be induced aggregation of RBC. The production of RBC aggregates was measured with a novel computerized cell flow properties analyzer (CFA). The PDT of RBC concentrates with sulfonated aluminum phthalocyanine (AIPcS4) and the silicon phthalocyanine Pc 4 under virucidal conditions markedly enhanced RBC aggregation and higher shear stress was required to disperse these aggregates. The clusters of cells were huge and abnormally shaped, unlike the rouleaux formed by untreated RBC. This aggregation was prevented when a mixture of antioxidants was included during PDT. Addition of the antioxidants after PDT reduced aggregation only partially. It is concluded that inclusion of antioxidants during PDT of RBC concentrates prior to transfusion may reduce or eliminate the hemodynamic risk that the virucidal treatment may present to the recipient.

  5. Influence of red blood cell concentrations on the measurement of turbulence using hot-film anemometer.

    Science.gov (United States)

    Sallam, A M; Hwang, N H

    1983-11-01

    Measurement of local velocity fluctuations was made with an L-shaped conical hot-film probe in a submerged circular jet. The experiment was carried out in solutions of washed human red blood cells (RBC) in a phosphate buffer solution (PBS), at hematocrit concentrations (Ht percent) of 10, 19, 29, and 38 percent. The viscosity of the testing solutions was kept at 3.2 c.p. by adding proper amount of dextran. The experiment was conducted at Reynolds numbers (NR) 674, 963, 1255 and 1410, based on the jet exit velocity and exit diameter. Statistical analyses were performed on the recorded instantaneous velocity signals to obtain the root-mean-square (rms) values, the probability density functions (PDF) and the power spectral density functions (PSDF) of the signals. Within the range tested, we noticed an incidental rise in rms values at 19 to 29 Ht percent for NR = 963 similar to those reported earlier in the literature. Further analyses using PDF and PSDF, however, showed neither a trend nor any physical significance of this rise. Based on the analyses of both the PDF and the PSDF, we believe that the incidental rise in rms value can be partially attributed to the high spikes registered by the probe in a high RBC concentrations fluid flow. The bombardment of RBC on the probe thermal boundary layer may cause a characteristic change in the probe response to certain flow phenomenon, at least within the Reynolds number range used in this study.(ABSTRACT TRUNCATED AT 250 WORDS)

  6. Optimized scalable stack of fluorescent solar concentrator systems with bifacial silicon solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Martínez Díez, Ana Luisa, E-mail: a.martinez@itma.es [Fundación ITMA, Parque Empresarial Principado de Asturias, C/Calafates, Parcela L-3.4, 33417 Avilés (Spain); Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110 Freiburg (Germany); Gutmann, Johannes; Posdziech, Janina; Rist, Tim; Goldschmidt, Jan Christoph [Fraunhofer Institute for Solar Energy Systems ISE, Heidenhofstr. 2, 79110 Freiburg (Germany); Plaza, David Gómez [Fundación ITMA, Parque Empresarial Principado de Asturias, C/Calafates, Parcela L-3.4, 33417 Avilés (Spain)

    2014-10-21

    In this paper, we present a concentrator system based on a stack of fluorescent concentrators (FCs) and a bifacial solar cell. Coupling bifacial solar cells to a stack of FCs increases the performance of the system and preserves its efficiency when scaled. We used an approach to optimize a fluorescent solar concentrator system design based on a stack of multiple fluorescent concentrators (FC). Seven individual fluorescent collectors (20 mm×20 mm×2 mm) were realized by in-situ polymerization and optically characterized in regard to their ability to guide light to the edges. Then, an optimization procedure based on the experimental data of the individual FCs was carried out to determine the stack configuration that maximizes the total number of photons leaving edges. Finally, two fluorescent concentrator systems were realized by attaching bifacial silicon solar cells to the optimized FC stacks: a conventional system, where FC were attached to one side of the solar cell as a reference, and the proposed bifacial configuration. It was found that for the same overall FC area, the bifacial configuration increases the short-circuit current by a factor of 2.2, which is also in agreement with theoretical considerations.

  7. Effect of platelet-rich plasma (PRP) concentration on the viability and proliferation of alveolar bone cells: an in vitro study.

    Science.gov (United States)

    Choi, B-H; Zhu, S-J; Kim, B-Y; Huh, J-Y; Lee, S-H; Jung, J-H

    2005-06-01

    Previous studies have shown that a combination of platelet-rich plasma (PRP) and autogenous bone graft can increase the rate of osteogenesis and enhance bone formation qualitatively. However, contradictory results were reported in a recent animal study. In order to clarify this inconsistency, this study examined the influence of the PRP concentrations on the viability and proliferation of alveolar bone cells in vitro. Bone cells obtained from the alveolar bone chips were exposed to various PRP concentrations. After a culture period of 7 days, cellular viability and proliferation were evaluated by counting the number of cells and a MTT assay. The results showed that the viability and proliferation of alveolar bone cells were suppressed by high PRP concentrations, but were stimulated by low PRP concentrations (1-5%). These in vitro results support the view that variations in the PRP concentrations might influence the bone formation within the PRP-treated bone grafts.

  8. Hydrodynamic Cell Trapping for High Throughput Single-Cell Applications

    Directory of Open Access Journals (Sweden)

    Amin Abbaszadeh Banaeiyan

    2013-12-01

    Full Text Available The possibility to conduct complete cell assays under a precisely controlled environment while consuming minor amounts of chemicals and precious drugs have made microfluidics an interesting candidate for quantitative single-cell studies. Here, we present an application-specific microfluidic device, cellcomb, capable of conducting high-throughput single-cell experiments. The system employs pure hydrodynamic forces for easy cell trapping and is readily fabricated in polydimethylsiloxane (PDMS using soft lithography techniques. The cell-trapping array consists of V-shaped pockets designed to accommodate up to six Saccharomyces cerevisiae (yeast cells with the average diameter of 4 μm. We used this platform to monitor the impact of flow rate modulation on the arsenite (As(III uptake in yeast. Redistribution of a green fluorescent protein (GFP-tagged version of the heat shock protein Hsp104 was followed over time as read out. Results showed a clear reverse correlation between the arsenite uptake and three different adjusted low = 25 nL min−1, moderate = 50 nL min−1, and high = 100 nL min−1 flow rates. We consider the presented device as the first building block of a future integrated application-specific cell-trapping array that can be used to conduct complete single cell experiments on different cell types.

  9. High-Resolution Mapping of Protein Concentration Reveals Principles of Proteome Architecture and Adaptation

    Directory of Open Access Journals (Sweden)

    Emmanuel D. Levy

    2014-05-01

    Full Text Available A single yeast cell contains a hundred million protein molecules. How these proteins are organized to orchestrate living processes is a central question in biology. To probe this organization in vivo, we measured the local concentration of proteins based on the strength of their nonspecific interactions with a neutral reporter protein. We first used a cytosolic reporter and measured local concentrations for ∼2,000 proteins in S. cerevisiae, with accuracy comparable to that of mass spectrometry. Localizing the reporter to membranes specifically increased the local concentration measured for membrane proteins. Comparing the concentrations measured by both reporters revealed that encounter frequencies between proteins are primarily dictated by their abundances. However, to change these encounter frequencies and restructure the proteome, as in adaptation, we find that changes in localization have more impact than changes in abundance. These results highlight how protein abundance and localization contribute to proteome organization and reorganization.

  10. High serum uric acid concentration predicts poor survival in patients with breast cancer.

    Science.gov (United States)

    Yue, Cai-Feng; Feng, Pin-Ning; Yao, Zhen-Rong; Yu, Xue-Gao; Lin, Wen-Bin; Qian, Yuan-Min; Guo, Yun-Miao; Li, Lai-Sheng; Liu, Min

    2017-08-26

    Uric acid is a product of purine metabolism. Recently, uric acid has gained much attraction in cancer. In this study, we aim to investigate the clinicopathological and prognostic significance of serum uric acid concentration in breast cancer patients. A total of 443 female patients with histopathologically diagnosed breast cancer were included. After a mean follow-up time of 56months, survival was analysed using the Kaplan-Meier method. To further evaluate the prognostic significance of uric acid concentrations, univariate and multivariate Cox regression analyses were applied. Of the clinicopathological parameters, uric acid concentration was associated with age, body mass index, ER status and PR status. Univariate analysis identified that patients with increased uric acid concentration had a significantly inferior overall survival (HR 2.13, 95% CI 1.15-3.94, p=0.016). In multivariate analysis, we found that high uric acid concentration is an independent prognostic factor predicting death, but insufficient to predict local relapse or distant metastasis. Kaplan-Meier analysis indicated that high uric acid concentration is related to the poor overall survival (p=0.013). High uric acid concentration predicts poor survival in patients with breast cancer, and might serve as a potential marker for appropriate management of breast cancer patients. Copyright © 2017. Published by Elsevier B.V.

  11. High Radiation Resistance IMM Solar Cell

    Science.gov (United States)

    Pan, Noren

    2015-01-01

    Due to high launch costs, weight reduction is a key driver for the development of new solar cell technologies suitable for space applications. This project is developing a unique triple-junction inverted metamorphic multijunction (IMM) technology that enables the manufacture of very lightweight, low-cost InGaAsP-based multijunction solar cells. This IMM technology consists of indium (In) and phosphorous (P) solar cell active materials, which are designed to improve the radiation-resistant properties of the triple-junction solar cell while maintaining high efficiency. The intrinsic radiation hardness of InP materials makes them of great interest for building solar cells suitable for deployment in harsh radiation environments, such as medium Earth orbit and missions to the outer planets. NASA Glenn's recently developed epitaxial lift-off (ELO) process also will be applied to this new structure, which will enable the fabrication of the IMM structure without the substrate.

  12. The effect of low concentrations of ethanol on gastric adenocarcinoma cell lines

    OpenAIRE

    Wu Lingjiao; Chen Shaohua; Zhang Yu; Pan Hongming

    2013-01-01

    Chronic alcohol consumption was identified as a significant risk factor for cancer in humans. The aim of the study was to analyze the influence of low concentrations of ethanol on gastric adenocarcinoma cell viability, apoptosis, and changes in the expression of alcohol dehydrogenase with ethanol treatment. Gastric adenocarcinoma cell lines (MGC803, MGC823 and SGC7901) were treated with different concentrations of ethanol (0.03125%, 0.0625%, 0.125%, 0.25%, 0.5%, 1%, 2%, and 4%). The MTT...

  13. Interdigitated back contact solar cell with high-current collection

    Energy Technology Data Exchange (ETDEWEB)

    Garner, C. M.; Nasby, R. D.; Sexton, F. W.; Rodriguez, J. L.; Norwood, D. P.

    1981-01-01

    Internal current-collection efficiencies greater than 90 percent and energy-conversion efficiencies of 18 percent at 30 suns have been measured on a laboratory version of the interdigitated back contact (IBC) solar cell. The quantum efficiency at 600 nm was greater than 90 percent which implies a minority carrier lifetime of greater than 350 ..mu..sec and a front surface recombination velocity of less than 30 cm/sec on the better devices. To achieve these high-current collection efficiencies, a phosphorous gettering diffusion was performed on the front surface and then etched off. Also, thermal oxides were grown on the front and back of the cell to passivate the silicon surfaces. Although the internal collection efficiencies of the cell were high, series resistance caused the fill factor (FF) to decrease at concentrations above 30 suns. Dark current measurements on cells with a new grid spacing indicate that the series resistance is much lower than in the previous cell design. This should result in higher efficiencies at high concentration.

  14. High alveolar concentration of nitric oxide is associated with alveolitis in scleroderma.

    Science.gov (United States)

    Tiev, Kiet Phong; Hua-Huy, Thong; Rivière, Sébastien; Le-Dong, Nhat-Nam; Febvre, Michel; Cabane, Jean; Dinh-Xuan, Anh Tuan

    2013-01-15

    Alveolar concentration of nitric oxide (C(A)NO) is a non invasive prognostic marker of systemic sclerosis (SSc) lung disease. There is, however, as yet no direct evidence showing concomitant increase of C(A)NO and the presence of inflammatory cells in alveoli. We have therefore measured C(A)NO and performed broncho-alveolar lavage (BAL) in SSc patients. Exhaled NO was measured, by the means of two different models, the two-compartment model (2CM) and the trumpet model with axial diffusion (TMAD), in 22 SSc patients and compared with 15 healthy controls. BAL was performed in all SSc patients. Alveolitis was defined as lymphocytes >14%, polymorphonuclears >4%, or eosinophils >3% on cell count in BAL fluid. Comparisons of C(A)NO levels were made between SSc patients with, and without, alveolitis. Levels of C(A)NO were significantly higher in SSc patients as compared with controls (palveolitis as compared with SSc patients without alveolitis (8.4ppb; 1st and 3rd interquartile range: 6.0-10.5 vs 3.3ppb; 2.2-3.5; p=0.004 for 2CM and 5.4ppb; 3.2-9.2 vs 3.2ppb; 1.4-3.3, p=0.02 for TMAD), while bronchial airway output of NO (J'awNO, p=0.19), and fractional exhaled NO (F(E)NO, p=0.12) were comparable. C(A)NO was consistently high in SSc patients with alveolitis irrespective of the methods chosen (TMAD or 2CM). Our findings showed that increased C(A)NO was associated with alveolitis in patients with SSc. We submit that C(A)NO could be used as a reliable non-invasive surrogate biomarker of alveolitis in scleroderma lung disease. Copyright © 2012 Elsevier Inc. All rights reserved.

  15. A single diffractive optical element implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

    Institute of Scientific and Technical Information of China (English)

    Ye Jia-Sheng; Wang Jin-Ze; Huang Qing-Li; Dong Bi-Zhen; Zhang Yan; Yang Guo-Zhen

    2013-01-01

    In this paper,a novel method is proposed and employed to design a single diffractive optical element (DOE) for implementing spectrum-splitting and beam-concentration (SSBC) functions simultaneously.We develop an optimization algorithm,through which the SSBC DOE can be optimized within an arbitrary thickness range according to the limitations of modem photolithography technology.Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency.It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

  16. A single diffractive optical element for implementing spectrum-splitting and beam-concentration functions simultaneously with high diffraction efficiency

    CERN Document Server

    Ye, Jia-Sheng; Huang, Qing-Li; Dong, Bi-Zhen; Zhang, Yan; Yang, Guo-Zhen

    2013-01-01

    In this paper, a novel method is proposed, and employed to design a single diffractive optical element (DOE) for implementing spectrum-splitting and beam-concentration (SSBC) functions simultaneously. We develop an optimization algorithm, through which the SSBC DOE can be optimized within an arbitrary thickness range, according to the limitations of modern photolithography technology. Theoretical simulation results reveal that the designed SSBC DOE has a high optical focusing efficiency. It is expected that the designed SSBC DOE should have practical applications in high-efficiency solar cell systems.

  17. Concentration dependent survival and neural differentiation of murine embryonic stem cells cultured on polyethylene glycol dimethacrylate hydrogels possessing a continuous concentration gradient of n-cadherin derived peptide His-Ala-Val-Asp-Lle.

    Science.gov (United States)

    Lim, Hyun Ju; Mosley, Matthew C; Kurosu, Yuki; Smith Callahan, Laura A

    2016-12-01

    N-cadherin cell-cell signaling plays a key role in the structure and function of the nervous system. However, few studies have incorporated bioactive signaling from n-cadherin into tissue engineering matrices. The present study uses a continuous gradient approach in polyethylene glycol dimethacrylate hydrogels to identify concentration dependent effects of n-cadherin peptide, His-Ala-Val-Asp-Lle (HAVDI), on murine embryonic stem cell survival and neural differentiation. The n-cadherin peptide was found to affect the expression of pluripotency marker, alkaline phosphatase, in murine embryonic stem cells cultured on n-cadherin peptide containing hydrogels in a concentration dependent manner. Increasing n-cadherin peptide concentrations in the hydrogels elicited a biphasic response in neurite extension length and mRNA expression of neural differentiation marker, neuron-specific class III β-tubulin, in murine embryonic stem cells cultured on the hydrogels. High concentrations of n-cadherin peptide in the hydrogels were found to increase the expression of apoptotic marker, caspase 3/7, in murine embryonic stem cells compared to that of murine embryonic stem cell cultures on hydrogels containing lower concentrations of n-cadherin peptide. Increasing the n-cadherin peptide concentration in the hydrogels facilitated greater survival of murine embryonic stem cells exposed to increasing oxidative stress caused by hydrogen peroxide exposure. The combinatorial approach presented in this work demonstrates concentration dependent effects of n-cadherin signaling on mouse embryonic stem cell behavior, underscoring the need for the greater use of systematic approaches in tissue engineering matrix design in order to understand and optimize bioactive signaling in the matrix for tissue formation.

  18. Adsorption behavior of low concentration carbon monoxide on polymer electrolyte fuel cell anodes for automotive applications

    Science.gov (United States)

    Matsuda, Yoshiyuki; Shimizu, Takahiro; Mitsushima, Shigenori

    2016-06-01

    The adsorption behavior of CO on the anode around the concentration of 0.2 ppm allowed by ISO 14687-2 is investigated in polymer electrolyte fuel cells (PEFCs). CO and CO2 concentrations in the anode exhaust are measured during the operation of a JARI standard single cell at 60 °C cell temperature and 1000 mA cm-2 current density. CO coverage is estimated from the gas analysis and CO stripping voltammetry. The cell voltage decrease as a result of 0.2 ppm CO is 29 mV and the CO coverage is 0.6 at the steady state with 0.11 mg cm-2 of anode platinum loading. The CO coverage as a function of CO concentration approximately follows a Temkin-type isotherm. Oxygen permeated to the anode through a membrane is also measured during fuel cell operation. The exhaust velocity of oxygen from the anode was shown to be much higher than the CO supply velocity. Permeated oxygen should play an important role in CO oxidation under low CO concentration conditions.

  19. Space Photovoltaic Concentrator Using Robust Fresnel Lenses, 4-Junction Cells, Graphene Radiators, and Articulating Receivers

    Science.gov (United States)

    O'Neill, Mark; McDanal, A. J.; Brandhorst, Henry; Spence, Brian; Iqbal, Shawn; Sharps, Paul; McPheeters, Clay; Steinfeldt, Jeff; Piszczor, Michael; Myers, Matt

    2016-01-01

    At the 42nd PVSC, our team presented recent advances in our space photovoltaic concentrator technology. These advances include more robust Fresnel lenses for optical concentration, more thermally conductive graphene radiators for waste heat rejection, improved color-mixing lens technology to minimize chromatic aberration losses with 4-junction solar cells, and an articulating photovoltaic receiver enabling single-axis sun-tracking, while maintaining a sharp focal line despite large beta angles of incidence. In the past year, under a NASA Phase II SBIR program, our team has made much additional progress in the development of this new space photovoltaic concentrator technology, as described in this paper.

  20. The effect of 3-bromopyruvate on human colorectal cancer cells is dependent on glucose concentration but not hexokinase II expression.

    Science.gov (United States)

    Ho, Nelson; Morrison, Jodi; Silva, Andreza; Coomber, Brenda L

    2016-01-06

    Cancer cells heavily rely on the glycolytic pathway regardless of oxygen tension. Hexokinase II (HKII) catalyses the first irreversible step of glycolysis and is often overexpressed in cancer cells. 3-Bromopyruvate (3BP) has been shown to primarily target HKII, and is a promising anti-cancer compound capable of altering critical metabolic pathways in cancer cells. Abnormal vasculature within tumours leads to heterogeneous microenvironments, including glucose availability, which may affect drug sensitivity. The aim of the present study was to elucidate the mechanisms by which 3BP acts on colorectal cancer (CRC) cells with focus on the HKII/Akt signalling axis. High HKII-expressing cell lines were more sensitive to 3BP than low HKII-expressing cells. 3BP-induced rapid Akt phosphorylation at site Thr-308 and cell death via both apoptotic and necrotic mechanisms. Cells grown under lower glucose concentrations showed greater resistance towards 3BP. Cells with HKII knockdown showed no changes in 3BP sensitivity, suggesting the effects of 3BP are independent of HKII expression. These results emphasize the importance of the tumour microenvironment and glucose availability when considering therapeutic approaches involving metabolic modulation.

  1. An incidence of very high phosphate concentrations in the waters around Andaman Islands

    Digital Repository Service at National Institute of Oceanography (India)

    Reddy, C.V.G.; Murty, P.S.N.; Sankaranarayanan, V.N.

    at stations close to coasts; 2) vertical distribution of phosphates in 200 metre column does not appear to correspond to any regular accepted pattern and 3) all the phosphates having the abnormally high phosphate concentration were found to be highly turbid...

  2. Coupled simulation of performance of a crossed compound parabolic concentrator with solar cell

    OpenAIRE

    2015-01-01

    An optimal installation of a compound parabolic concentrator (CCPC) into a scalable solar thermoelectrics and photovoltaics system is desirable by applying analytical tools to improve the optical and thermal performance of a CCPC with a solar cell. In this paper, the optical and thermal performances of an isolated CCPC with solar cell are investigated by employing commercial software ‘ANSYS CFX 15.0’ with a coupled optical grey and multiphysics model. Numerical results are validated against t...

  3. Influence of Mechanical Activation on Acid Leaching Dephosphorization of High-phosphorus Iron Ore Concentrates

    Institute of Scientific and Technical Information of China (English)

    De-qing ZHU; Hao WANG; Jian PAN; Cong-cong YANG

    2016-01-01

    High pressure roll grinding (HPRG)and ball milling were compared to investigate the influence of me-chanical activation on the acid leaching dephosphorization of a high-phosphorus iron ore concentrate,which was man-ufactured through magnetizing roasting-magnetic separation of high-phosphorus oolitic iron ores.The results indica-ted that when high-phosphorus iron ore concentrates containing 54·92 mass% iron and 0·76 mass% phosphorus were directly processed through acid leaching,iron ore concentrates containing 55·74 mass% iron and 0·33 mass%phosphorus with an iron recovery of 84·64% and dephosphorization of 63·79% were obtained.When high-phosphor-us iron ore concentrates activated by ball milling were processed by acid leaching,iron ore concentrates containing 56·03 mass% iron and 0·21 mass% phosphorus with an iron recovery of 85·65% and dephosphorization of 77·49%were obtained.Meanwhile,when high-phosphorus iron ore concentrates activated by HPRG were processed by acid leaching,iron ore concentrates containing 58·02 mass% iron and 0·10 mass% phosphorus were obtained,with the iron recovery reaching 88·42% and the dephosphorization rate reaching 88·99%.Mechanistic studies demonstrated that ball milling can reduce the particle size,demonstrating a prominent reunion phenomenon.In contrast,HPRG pretreatment contributes to the formation of more cracks within the particles and selective dissociation of iron and P bearing minerals,which can provide the favorable kinetic conditions to accelerate the solid-liquid reaction rate.As such,the crystal structure is destroyed and the surface energy of mineral particles is strengthened by mechanical ac-tivation,further strengthening the dephosphorization.

  4. Prodigious Effects of Concentration Intensification on Nanoparticle Synthesis: A High-Quality, Scalable Approach

    KAUST Repository

    Williamson, Curtis B.

    2015-12-23

    © 2015 American Chemical Society. Realizing the promise of nanoparticle-based technologies demands more efficient, robust synthesis methods (i.e., process intensification) that consistently produce large quantities of high-quality nanoparticles (NPs). We explored NP synthesis via the heat-up method in a regime of previously unexplored high concentrations near the solubility limit of the precursors. We discovered that in this highly concentrated and viscous regime the NP synthesis parameters are less sensitive to experimental variability and thereby provide a robust, scalable, and size-focusing NP synthesis. Specifically, we synthesize high-quality metal sulfide NPs (<7% relative standard deviation for Cu2-xS and CdS), and demonstrate a 10-1000-fold increase in Cu2-xS NP production (>200 g) relative to the current field of large-scale (0.1-5 g yields) and laboratory-scale (<0.1 g) efforts. Compared to conventional synthesis methods (hot injection with dilute precursor concentration) characterized by rapid growth and low yield, our highly concentrated NP system supplies remarkably controlled growth rates and a 10-fold increase in NP volumetric production capacity (86 g/L). The controlled growth, high yield, and robust nature of highly concentrated solutions can facilitate large-scale nanomanufacturing of NPs by relaxing the synthesis requirements to achieve monodisperse products. Mechanistically, our investigation of the thermal and rheological properties and growth rates reveals that this high concentration regime has reduced mass diffusion (a 5-fold increase in solution viscosity), is stable to thermal perturbations (64% increase in heat capacity), and is resistant to Ostwald ripening.

  5. Thermal Management of Concentrated Multi-Junction Solar Cells with Graphene-Enhanced Thermal Interface Materials

    Directory of Open Access Journals (Sweden)

    Mohammed Saadah

    2017-06-01

    Full Text Available We report results of experimental investigation of temperature rise in concentrated multi-junction photovoltaic solar cells with graphene-enhanced thermal interface materials. Graphene and few-layer graphene fillers, produced by a scalable environmentally-friendly liquid-phase exfoliation technique, were incorporated into conventional thermal interface materials. Graphene-enhanced thermal interface materials have been applied between a solar cell and heat sink to improve heat dissipation. The performance of the multi-junction solar cells has been tested using an industry-standard solar simulator under a light concentration of up to 2000 sun