WorldWideScience

Sample records for high capacitance perpendicular

  1. Highly sensitive micromachined capacitive pressure sensor with reduced hysteresis and low parasitic capacitance

    DEFF Research Database (Denmark)

    Pedersen, Thomas; Fragiacomo, Giulio; Hansen, Ole

    2009-01-01

    This paper describes the design and fabrication of a capacitive pressure sensor that has a large capacitance signal and a high sensitivity of 76 pF/bar in touch mode operation. Due to the large signal, problems with parasitic capacitances are avoided and hence it is possible to integrate the sens...... bonding to create vacuum cavities. The exposed part of the sensor is perfectly flat such that it can be coated with corrosion resistant thin films. Hysteresis is an inherent problem in touch mode capacitive pressure sensors and a technique to significantly reduce it is presented....

  2. NANO-MULTILAYERS WITH HIGH PERPENDICULAR ANISOTROPY FOR MAGNETIC RECORDING

    Institute of Scientific and Technical Information of China (English)

    T. Yang; B.H. Li; K. Kang; T. Suzuki

    2003-01-01

    (FePt/Ag)n nano-multilayers were deposited on MgO (100) single crystal with laser ablation and then subjected to annealing. FePt L1o grains with (001) texture and thus a large perpendicular magnetic anisotropy constant Ku of the order of 106J/m3 were formed. A thick Ag layer is found to be favorable for decreasing the dispersion of the easy axis for magnetization. The measurement of time decay of magnetization gave rise to a small activation volume of the order of 10-25 m3, showing the promising of being the recording medium for future high density perpendicular recording.

  3. Perpendicular patterned media for high density magnetic storage

    Science.gov (United States)

    Wong, Joyce Y.

    2000-11-01

    Current longitudinal thin-film media in magnetic hard- disk drives are facing an oncoming limit caused by the superparamagnetic effect, in which the individual grains in the medium become so small that they are no longer stable against thermal fluctuation. This situation is undesirable as the stored information may be lost within an unexpectedly short time frame. There have been several proposed solutions in addressing the superparamagnetic limit, and one of them is perpendicular patterned media. In this approach, a periodic array of magnetic pillars is defined lithographically on a non-magnetic substrate. Binary data of ``1'' or ``0'' can be stored in each of these elements, which have two possible magnetization directions perpendicular to the plane of the medium. In our perpendicular patterned media design, Ni columns of 150-230nm diameter with a 6:1 aspect ratio are embedded in an (AlGa)2O 3/GaAs substrate. The fabrication procedure uses a combination of high resolution electron beam lithography, dry etching, and electroplating. The high aspect ratio in the column is achieved by taking advantage of the high etching rate and selectivity of AlGaAs/GaAs over (AlGa)2O 3 in the Cl2 chemically assisted ion beam etching process. In addition to being a robust etching mask, the (AlGa)2O3 layer also plays an important role in the chemical mechanical polishing procedure to remove the overplated Ni mushrooms. Once the Ni columns are fabricated, magnetic characterization is performed using magnetic force microscopy and scanning magnetoresistance microscopy. The former measurement confirms that the electroplated Ni columns are magnetic while the latter determines whether the individual columns are stable enough to retain the recorded information. We have successfully demonstrated recording in our 170nm diameter Ni column array arranged in a square format using a commercial read/write head. This is the first demonstration of single magnetic column per bit data storage in a

  4. Study of High Capacitance Ratios CPW MEMS Shunt Switches

    Institute of Scientific and Technical Information of China (English)

    Jianhai Sun; Dafu Cui

    2006-01-01

    This paper describes a fixed-fixed beam ohmic switch in series with a fixed capacitor as a replacement for a capacitive switch. In this switch, a metal plate deposited on the dielectric ensures perfectly contact with the dielectric layer in the down state. The area size of the metal plate directly influences the capacitance ratio of the switch, as the area size of the metal cap decreases, the capacitance ratio dramatically rises up. The down/up capacitance ratio can exceed 800 times over the conventional designs using the same materials and the equal size. Measurement results show that high capacitance ratio of the switches has a large effect on the isolation, and can actually improve the performance of the switches.

  5. Micromagnetic simulation for high field sensors with perpendicular magnetizations

    Institute of Scientific and Technical Information of China (English)

    Jin Wei; Liu Yao-Wen

    2007-01-01

    In this paper, we present a micromagnetic design for high field sensors. The hard layer of the sensors is L10-FePt which is magnetized perpendicularly to film plane and the sense layer is NiFe which is magnetized in the film plane. The magnetization configurations of the hard and sense layers at different external magnetic fields have been simulated. In micromagnetic simulation, the sense field up to one tesla can be reached by using this sensor. We find that whether the sensor has a symmetric or an asymmetric field-sensing window is determined by the coercive field of the hard layer and the demagnetizing field of the sense layer.

  6. High Voltage Bi-directional Flyback Converter for Capacitive Actuator

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Zhang, Zhe; Andersen, Michael A. E.

    2013-01-01

    This paper presents a high voltage DC-DC converter topology for bi-directional energy transfer between a low voltage DC source and a high voltage capacitive load. The topology is a bi-directional flyback converter with variable switching frequency control during the charge mode, and constant...... switching frequency control during the discharge mode. The converter is capable of charging the capacitive load from 24 V DC source to 2.5 kV, and discharges it to 0 V. The flyback converter has been analyzed in detail during both charge and discharge modes, by considering all the parasitic elements...... in the converter, including the most dominating parameters of the high voltage transformer viz., self-capacitance and leakage inductance. The specific capacitive load for this converter is a dielectric electro active polymer (DEAP) actuator, which can be used as an effective replacement for conventional actuators...

  7. A Review of High Voltage Drive Amplifiers for Capacitive Actuators

    DEFF Research Database (Denmark)

    Huang, Lina; Zhang, Zhe; Andersen, Michael A. E.

    2012-01-01

    This paper gives an overview of the high voltage amplifiers, which are used to drive capacitive actuators. The amplifiers for both piezoelectric and DEAP (dielectric electroactive polymer) actuator are discussed. The suitable topologies for driving capacitive actuators are illustrated in detail, ......, including linear as well as switched mode amplifiers. In the past much attention has been paid on the driver for piezoelectric actuator. As DEAP is a type of new material, there is not much literature reference for it.......This paper gives an overview of the high voltage amplifiers, which are used to drive capacitive actuators. The amplifiers for both piezoelectric and DEAP (dielectric electroactive polymer) actuator are discussed. The suitable topologies for driving capacitive actuators are illustrated in detail...

  8. Modeling high-frequency capacitance in SOI MOS capacitors

    Science.gov (United States)

    Łukasiak, Lidia; Jasiński, Jakub; Beck, Romuald B.; Ikraiam, Fawzi A.

    2016-12-01

    This paper presents a model of high frequency capacitance of a SOI MOSCAP. The capacitance in strong inversion is described with minority carrier redistribution in the inversion layer taken into account. The efficiency of the computational process is significantly improved. Moreover, it is suitable for the simulation of thin-film SOI structures. It may also be applied to the characterization of non-standard SOI MOSCAPS e.g. with nanocrystalline body.

  9. Highly Efficient Domain Walls Injection in Perpendicular Magnetic Anisotropy Nanowire.

    Science.gov (United States)

    Zhang, S F; Gan, W L; Kwon, J; Luo, F L; Lim, G J; Wang, J B; Lew, W S

    2016-04-21

    Electrical injection of magnetic domain walls in perpendicular magnetic anisotropy nanowire is crucial for data bit writing in domain wall-based magnetic memory and logic devices. Conventionally, the current pulse required to nucleate a domain wall is approximately ~10(12) A/m(2). Here, we demonstrate an energy efficient structure to inject domain walls. Under an applied electric potential, our proposed Π-shaped stripline generates a highly concentrated current distribution. This creates a highly localized magnetic field that quickly initiates the nucleation of a magnetic domain. The formation and motion of the resulting domain walls can then be electrically detected by means of Ta Hall bars across the nanowire. Our measurements show that the Π-shaped stripline can deterministically write a magnetic data bit in 15 ns even with a relatively low current density of 5.34 × 10(11) A/m(2). Micromagnetic simulations reveal the evolution of the domain nucleation - first, by the formation of a pair of magnetic bubbles, then followed by their rapid expansion into a single domain. Finally, we also demonstrate experimentally that our injection geometry can perform bit writing using only about 30% of the electrical energy as compared to a conventional injection line.

  10. Highly Efficient Domain Walls Injection in Perpendicular Magnetic Anisotropy Nanowire

    Science.gov (United States)

    Zhang, S. F.; Gan, W. L.; Kwon, J.; Luo, F. L.; Lim, G. J.; Wang, J. B.; Lew, W. S.

    2016-04-01

    Electrical injection of magnetic domain walls in perpendicular magnetic anisotropy nanowire is crucial for data bit writing in domain wall-based magnetic memory and logic devices. Conventionally, the current pulse required to nucleate a domain wall is approximately ~1012 A/m2. Here, we demonstrate an energy efficient structure to inject domain walls. Under an applied electric potential, our proposed Π-shaped stripline generates a highly concentrated current distribution. This creates a highly localized magnetic field that quickly initiates the nucleation of a magnetic domain. The formation and motion of the resulting domain walls can then be electrically detected by means of Ta Hall bars across the nanowire. Our measurements show that the Π-shaped stripline can deterministically write a magnetic data bit in 15 ns even with a relatively low current density of 5.34 × 1011 A/m2. Micromagnetic simulations reveal the evolution of the domain nucleation – first, by the formation of a pair of magnetic bubbles, then followed by their rapid expansion into a single domain. Finally, we also demonstrate experimentally that our injection geometry can perform bit writing using only about 30% of the electrical energy as compared to a conventional injection line.

  11. Class D audio amplifiers for high voltage capacitive transducers

    DEFF Research Database (Denmark)

    Nielsen, Dennis

    voltage capacitive transducers can be constructed with THD+N below 0.1 % and peak efficiency above 80 %. However the complexity of the amplifier combined with the current high cost of components, makes the technology of DEAP based loudspeaker unfeasible. Suggestions to future work in the pursuit...... of high volume, weight, and cost. High efficient class D amplifiers are now widely available offering power densities, that their linear counterparts can not match. Unlike the technology of audio amplifiers, the loudspeaker is still based on the traditional electrodynamic transducer invented by C.W. Rice....... Due to the similarities between the electrostatic loudspeaker and the DEAP transducer, the state-of-the-art has a special focus on amplifiers for electrostatic loudspeakers. Amplifiers for other type of capacitive transducers like piezoelectric ones are also considered. Finally the current state...

  12. A High-Stability Capacitance Sensor System and Its Evaluation

    Science.gov (United States)

    2008-12-01

    15:45 from IEEE Xplore . Restrictions apply. Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the collection of...45 from IEEE Xplore . Restrictions apply. AVRAMOV-ZAMUROVIC AND LEE: HIGH-STABILITY CAPACITANCE SENSOR SYSTEM AND ITS EVALUATION 957 Fig. 4...Authorized licensed use limited to: US Naval Academy. Downloaded on May 13, 2009 at 15:45 from IEEE Xplore . Restrictions apply. 958 IEEE TRANSACTIONS

  13. High resolution capacitance detection circuit for rotor micro-gyroscope

    Directory of Open Access Journals (Sweden)

    Ming-Yuan Ren

    2014-03-01

    Full Text Available Conventional methods for rotor position detection of micro-gyroscopes include common exciting electrodes (single frequency and common sensing electrodes (frequency multiplex, but they have encountered some problems. So we present a high resolution and low noise pick-off circuit for micro-gyroscopes which utilizes the time multiplex method. The detecting circuit adopts a continuous-time current sensing circuit for capacitance measurement, and its noise analysis of the charge amplifier is introduced. The equivalent output noise power spectral density of phase-sensitive demodulation is 120 nV/Hz1/2. Tests revealed that the whole circuitry has a relative capacitance resolution of 1 × 10−8.

  14. Capacitive MEMS accelerometers for measuring high-g accelerations

    Science.gov (United States)

    Baginsky, I. L.; Kostsov, E. G.

    2017-05-01

    A possibility of creating a capacitive accelerometer for measuring high- g accelerations (up to 106 g and higher) is discussed. It is demonstrated that insertion of a thin electret film with a high surface potential into the gap between the electrodes ensures significant expansion of the frequency and amplitude ranges of acceleration measurements, whereas the size of the proposed device is smaller than that of available MEMS accelerometers for measuring high- g accelerations. A mathematical model of an electret accelerometer for high- g accelerations is developed, and the main specific features of accelerometer operation are analyzed.

  15. High capacitance of coarse-grained carbide derived carbon electrodes

    Science.gov (United States)

    Dyatkin, Boris; Gogotsi, Oleksiy; Malinovskiy, Bohdan; Zozulya, Yuliya; Simon, Patrice; Gogotsi, Yury

    2016-02-01

    We report exceptional electrochemical properties of supercapacitor electrodes composed of large, granular carbide-derived carbon (CDC) particles. Using a titanium carbide (TiC) precursor, we synthesized 70-250 μm sized particles with high surface area and a narrow pore size distribution. Electrochemical cycling of these coarse-grained powders defied conventional wisdom that a small particle size is strictly required for supercapacitor electrodes and allowed high charge storage densities, rapid transport, and good rate handling ability. The material showcased capacitance above 100 F g-1 at sweep rates as high as 250 mV s-1 in organic electrolyte. 250-1000 micron thick dense CDC films with up to 80 mg cm-2 loading showed superior areal capacitances. The material significantly outperformed its activated carbon counterpart in organic electrolytes and ionic liquids. Furthermore, large internal/external surface ratio of coarse-grained carbons allowed the resulting electrodes to maintain high electrochemical stability up to 3.1 V in ionic liquid electrolyte. In addition to presenting novel insights into the electrosorption process, these coarse-grained carbons offer a pathway to low-cost, high-performance implementation of supercapacitors in automotive and grid-storage applications.

  16. Electrical Capacitance Volume Tomography with High-Contrast Dielectrics

    Science.gov (United States)

    Nurge, Mark

    2010-01-01

    The Electrical Capacitance Volume Tomography (ECVT) system has been designed to complement the tools created to sense the presence of water in nonconductive spacecraft materials, by helping to not only find the approximate location of moisture but also its quantity and depth. The ECVT system has been created for use with a new image reconstruction algorithm capable of imaging high-contrast dielectric distributions. Rather than relying solely on mutual capacitance readings as is done in traditional electrical capacitance tomography applications, this method reconstructs high-resolution images using only the self-capacitance measurements. The image reconstruction method assumes that the material under inspection consists of a binary dielectric distribution, with either a high relative dielectric value representing the water or a low dielectric value for the background material. By constraining the unknown dielectric material to one of two values, the inverse math problem that must be solved to generate the image is no longer ill-determined. The image resolution becomes limited only by the accuracy and resolution of the measurement circuitry. Images were reconstructed using this method with both synthetic and real data acquired using an aluminum structure inserted at different positions within the sensing region. The cuboid geometry of the system has two parallel planes of 16 conductors arranged in a 4 4 pattern. The electrode geometry consists of parallel planes of copper conductors, connected through custom-built switch electronics, to a commercially available capacitance to digital converter. The figure shows two 4 4 arrays of electrodes milled from square sections of copper-clad circuit-board material and mounted on two pieces of glass-filled plastic backing, which were cut to approximately square shapes, 10 cm on a side. Each electrode is placed on 2.0-cm centers. The parallel arrays were mounted with the electrode arrays approximately 3 cm apart. The open ends

  17. Conductive MOF electrodes for stable supercapacitors with high areal capacitance

    Science.gov (United States)

    Sheberla, Dennis; Bachman, John C.; Elias, Joseph S.; Sun, Cheng-Jun; Shao-Horn, Yang; Dincă, Mircea

    2016-10-01

    Owing to their high power density and superior cyclability relative to batteries, electrochemical double layer capacitors (EDLCs) have emerged as an important electrical energy storage technology that will play a critical role in the large-scale deployment of intermittent renewable energy sources, smart power grids, and electrical vehicles. Because the capacitance and charge-discharge rates of EDLCs scale with surface area and electrical conductivity, respectively, porous carbons such as activated carbon, carbon nanotubes and crosslinked or holey graphenes are used exclusively as the active electrode materials in EDLCs. One class of materials whose surface area far exceeds that of activated carbons, potentially allowing them to challenge the dominance of carbon electrodes in EDLCs, is metal-organic frameworks (MOFs). The high porosity of MOFs, however, is conventionally coupled to very poor electrical conductivity, which has thus far prevented the use of these materials as active electrodes in EDLCs. Here, we show that Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 (Ni3(HITP)2), a MOF with high electrical conductivity, can serve as the sole electrode material in an EDLC. This is the first example of a supercapacitor made entirely from neat MOFs as active materials, without conductive additives or other binders. The MOF-based device shows an areal capacitance that exceeds those of most carbon-based materials and capacity retention greater than 90% over 10,000 cycles, in line with commercial devices. Given the established structural and compositional tunability of MOFs, these results herald the advent of a new generation of supercapacitors whose active electrode materials can be tuned rationally, at the molecular level.

  18. Conductive MOF electrodes for stable supercapacitors with high areal capacitance

    Science.gov (United States)

    Sheberla, Dennis; Bachman, John C.; Elias, Joseph S.; Sun, Cheng-Jun; Shao-Horn, Yang; Dincă, Mircea

    2017-02-01

    Owing to their high power density and superior cyclability relative to batteries, electrochemical double layer capacitors (EDLCs) have emerged as an important electrical energy storage technology that will play a critical role in the large-scale deployment of intermittent renewable energy sources, smart power grids, and electrical vehicles. Because the capacitance and charge-discharge rates of EDLCs scale with surface area and electrical conductivity, respectively, porous carbons such as activated carbon, carbon nanotubes and crosslinked or holey graphenes are used exclusively as the active electrode materials in EDLCs. One class of materials whose surface area far exceeds that of activated carbons, potentially allowing them to challenge the dominance of carbon electrodes in EDLCs, is metal-organic frameworks (MOFs). The high porosity of MOFs, however, is conventionally coupled to very poor electrical conductivity, which has thus far prevented the use of these materials as active electrodes in EDLCs. Here, we show that Ni3(2,3,6,7,10,11-hexaiminotriphenylene)2 (Ni3(HITP)2), a MOF with high electrical conductivity, can serve as the sole electrode material in an EDLC. This is the first example of a supercapacitor made entirely from neat MOFs as active materials, without conductive additives or other binders. The MOF-based device shows an areal capacitance that exceeds those of most carbon-based materials and capacity retention greater than 90% over 10,000 cycles, in line with commercial devices. Given the established structural and compositional tunability of MOFs, these results herald the advent of a new generation of supercapacitors whose active electrode materials can be tuned rationally, at the molecular level.

  19. High tunneling magnetoresistance ratio in perpendicular magnetic tunnel junctions using Fe-based Heusler alloys

    Science.gov (United States)

    Wang, Yu-Pu; Lim, Sze-Ter; Han, Gu-Chang; Teo, Kie-Leong

    2015-12-01

    Heulser alloys Fe2Cr1-xCoxSi (FCCS) with different Co compositions x have been predicted to have high spin polarization. High perpendicular magnetic anisotropy (PMA) has been observed in ultra-thin FCCS films with magnetic anisotropy energy density up to 2.3 × 106 erg/cm3. The perpendicular magnetic tunnel junctions (p-MTJs) using FCCS films with different Co compositions x as the bottom electrode have been fabricated and the post-annealing effects have been investigated in details. An attractive tunneling magnetoresistance ratio as high as 51.3% is achieved for p-MTJs using Fe2CrSi (FCS) as the bottom electrode. The thermal stability Δ can be as high as 70 for 40 nm dimension devices using FCS, which is high enough to endure a retention time of over 10 years. Therefore, Heusler alloy FCS is a promising PMA candidate for p-MTJ application.

  20. High-resolution in-source laser spectroscopy in perpendicular geometry

    Energy Technology Data Exchange (ETDEWEB)

    Heinke, R., E-mail: reinhard.heinke@uni-mainz.de; Kron, T. [Universität Mainz, Institut für Physik (Germany); Raeder, S. [Helmholtz-Institut Mainz (Germany); Reich, T.; Schönberg, P. [Universität Mainz, Institut für Kernchemie (Germany); Trümper, M.; Weichhold, C.; Wendt, K. [Universität Mainz, Institut für Physik (Germany)

    2017-11-15

    Operation of the novel laser ion source unit LIST (Laser Ion Source and Trap), operating at the on-line radioactive ion beam facility ISOLDE at CERN allowed for the production of ultra-pure beams of exotic isotopes far-off stability as well as direct isobar-free laser spectroscopy, giving access to the study of atomic and nuclear properties of so far inaccessible nuclides. We present a specific upgrade and adaption of the LIST targeted for high resolution spectroscopy with a Doppler-reduced perpendicular atom - laser beam geometry. With this PI-LIST (Perpendicularly Illuminated Laser Ion Source and Trap) setup, experimental linewidths below 100 MHz could be demonstrated in optical laser spectroscopy off-line, applying a pulsed injection-locked high repetition rate Ti:sapphire laser. A dual repeller configuration ensured highest suppression of isobaric interferences and almost background-free measurements on small samples in the order of 10{sup 11} atoms.

  1. On the high frequency perpendicular propagating waves in ultra-relativistic fully degenerate electron plasma

    Science.gov (United States)

    Noureen, S.; Abbas, G.; Farooq, H.

    2017-09-01

    Using Vlasov-Maxwell's equations, the spectra of the perpendicular propagating Bernstein wave and Extraordinary wave in ultra-relativistic fully degenerate electron plasma are studied. The equilibrium particle distribution function is assumed to be isotropic Fermian. The analysis of high frequency spectra of the waves is carried out in the weak propagation limit Ω≫k .v and in the weak magnetic field limit |ω-k .v | ≫Ω and graphically observed.

  2. Pseudo-hcp nonmagnetic intermediate layer for granular media with high perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Hashimoto, Atsushi [Department of Electronic Engineering, Tohoku University, 6-6-05 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Saito, Shin [Department of Electronic Engineering, Tohoku University, 6-6-05 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Itagaki, Norikazu [Department of Electronic Engineering, Tohoku University, 6-6-05 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Takahashi, Migaku [New Industry Creation Hatchery Center, Tohoku University, 6-6-10 Aoba, Aramaki, Aoba-ku, Sendai 980-8579 (Japan)

    2008-01-07

    Materials with the hexagonal close-packed structure (hcp) and the face-centred-cubic structure with stacking faults (pseudo-hcp) are examined for the nonmagnetic intermediate layer (NMIL) in order to suppress variant growth of magnetic grains for granular-type perpendicular recording media. Judging from the analysis of the epitaxial growth of Co-based magnetic grains, it has been found that a lattice misfit between NMIL and magnetic grain of less than 6% and a spreading coefficient of wettability of magnetic grain on NMIL of greater than 0.3 J m{sup -3} are required for the recording layer to have high perpendicular magnetic anisotropy energy. (fast track communication)

  3. NEMS Capacitive Sensors for Highly Sensitive, Label-Free Nucleic-Acid Analysis

    Science.gov (United States)

    Mannoor, Manu Sebastian; James, Teena; Ivanov, Dentcho V.; Beadling, Les; Braunlin, William

    A highly sensitive NEMS capacitive sensor with electrode separation in the order of Debye length is fabricated for label free DNA analysis. The use of nano-scale electrode separation provides better insight in to the target-probe interaction which was not previously attainable with macro or even micro scale devices. As the double layers from both the capacitive electrodes merge together and occupy a major fraction of the capacitive volume, the contribution from bulk sample resistance and noises due to electrode polarization effects are eliminated. The dielectric properties during hybridization reaction were measured using 10-mer nucleotide sequences. A 45-50% change in relative permittivity (capacitance) was observed due to DNA hybridization at 10Hz. Capacitive sensors with 30nm electrode separation were fabricated using standard silicon micro/nano technology and show promise for future electronic DNA arrays and high throughput screening of nucleic acid samples.

  4. CMOS capacitive biosensors for highly sensitive biosensing applications.

    Science.gov (United States)

    Chang, An-Yu; Lu, Michael S-C

    2013-01-01

    Magnetic microbeads are widely used in biotechnology and biomedical research for manipulation and detection of cells and biomolecules. Most lab-on-chip systems capable of performing manipulation and detection require external instruments to perform one of the functions, leading to increased size and cost. This work aims at developing an integrated platform to perform these two functions by implementing electromagnetic microcoils and capacitive biosensors on a CMOS (complementary metal oxide semiconductor) chip. Compared to most magnetic-type sensors, our detection method requires no externally applied magnetic fields and the associated fabrication is less complicated. In our experiment, microbeads coated with streptavidin were driven to the sensors located in the center of microcoils with functionalized anti-streptavidin antibody. Detection of a single microbead was successfully demonstrated using a capacitance-to-frequency readout. The average capacitance changes for the experimental and control groups were -5.3 fF and -0.2 fF, respectively.

  5. High bandwidth on-chip capacitive tuning of microtoroid resonators

    CERN Document Server

    Baker, Christopher G; McAuslan, David L; Sheridan, Eoin; Bowen, Warwick P

    2016-01-01

    We report on the design, fabrication and characterization of silica microtoroid based cavity opto-electromechanical systems (COEMS). Electrodes patterned onto the microtoroid resonators allow for rapid capacitive tuning of the optical whispering gallery mode resonances while maintaining their ultrahigh quality factor, enabling applications such as efficient radio to optical frequency conversion, optical routing and switching applications.

  6. RF-MEMS capacitive switches with high reliability

    Science.gov (United States)

    Goldsmith, Charles L.; Auciello, Orlando H.; Carlisle, John A.; Sampath, Suresh; Sumant, Anirudha V.; Carpick, Robert W.; Hwang, James; Mancini, Derrick C.; Gudeman, Chris

    2013-09-03

    A reliable long life RF-MEMS capacitive switch is provided with a dielectric layer comprising a "fast discharge diamond dielectric layer" and enabling rapid switch recovery, dielectric layer charging and discharging that is efficient and effective to enable RF-MEMS switch operation to greater than or equal to 100 billion cycles.

  7. High tunneling magnetoresistance ratio in perpendicular magnetic tunnel junctions using Fe-based Heusler alloys

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Yu-Pu, E-mail: Vicky-sg1015@hotmail.com [Department of Electrical and Computer Engineering, National University of Singapore (Singapore); Data Storage Institute, Agency for Science, Technology and Research - A*STAR (Singapore); Lim, Sze-Ter; Han, Gu-Chang, E-mail: HAN-Guchang@dsi.a-star.edu.sg [Data Storage Institute, Agency for Science, Technology and Research - A*STAR (Singapore); Teo, Kie-Leong, E-mail: eleteokl@nus.edu.sg [Department of Electrical and Computer Engineering, National University of Singapore (Singapore)

    2015-12-21

    Heulser alloys Fe{sub 2}Cr{sub 1−x}Co{sub x}Si (FCCS) with different Co compositions x have been predicted to have high spin polarization. High perpendicular magnetic anisotropy (PMA) has been observed in ultra-thin FCCS films with magnetic anisotropy energy density up to 2.3 × 10{sup 6 }erg/cm{sup 3}. The perpendicular magnetic tunnel junctions (p-MTJs) using FCCS films with different Co compositions x as the bottom electrode have been fabricated and the post-annealing effects have been investigated in details. An attractive tunneling magnetoresistance ratio as high as 51.3% is achieved for p-MTJs using Fe{sub 2}CrSi (FCS) as the bottom electrode. The thermal stability Δ can be as high as 70 for 40 nm dimension devices using FCS, which is high enough to endure a retention time of over 10 years. Therefore, Heusler alloy FCS is a promising PMA candidate for p-MTJ application.

  8. High-purity cobalt thin films with perpendicular magnetic anisotropy prepared by chemical vapor deposition

    Science.gov (United States)

    Ootera, Yasuaki; Shimada, Takuya; Kado, Masaki; Quinsat, Michael; Morise, Hirofumi; Nakamura, Shiho; Kondo, Tsuyoshi

    2015-11-01

    A study of the chemical vapor deposition (CVD) of high-purity cobalt thin films is described. The Co layer prepared by a thermal CVD technique with a Pt/Ta underlayer and a Pt cap layer shows a saturation magnetization (Ms) of ∼1.8 T and perpendicular magnetic anisotropy (PMA) with an anisotropy energy (Ku) of ∼105 J/m3. The cobalt thickness dependence of Ku reveals that the interfacial anisotropy at the Pt/Co interface is most likely the origin of the obtained PMA.

  9. Self-assembled Ti3C2Tx MXene film with high gravimetric capacitance.

    Science.gov (United States)

    Hu, Minmin; Li, Zhaojin; Zhang, Hui; Hu, Tao; Zhang, Chao; Wu, Zhen; Wang, Xiaohui

    2015-09-11

    Binder-free MXene films comprising Ti3C2Tx nanoflakes in a face-to-face fashion, achieved by a simple dropping-mild baking approach, exhibit high gravimetric capacitances up to 499 F g(-1) with excellent cyclability and rate performances. The entire electrode system including Ni-foam and MXene film shows volumetric capacitances in the range of 84-226 F cm(-3) depending on the loadings of MXene as active material.

  10. Perpendicular magnetic anisotropy in thin ferromagnetic films adjacent to high-k oxides

    Science.gov (United States)

    Xu, Meng; Bi, Chong; Rosales, Marcus; Newhouse-Illige, Ty; Almasi, Hamid; Wang, Weigang

    2015-03-01

    Perpendicular magnetic anisotropy (PMA) in thin ferromagnetic films has attracted a great deal of attention due to interesting physics and promising application in spintronic devices. The strength of PMA is often found to be strongly influenced by the adjacent heavy metal layer and oxide layer. A strong interest has emerged recently to control the PMA of these ultra-thin films by electric fields. Here we report the fabrication and characterization of perpendicularly magnetized 3d transitional metal films next to high-k oxides such as HfO2 and ZrO2. We have investigated structural, magnetic and transport properties of these films. The PMA strongly depends on the thickness of the ferromagnetic layers and the interfacial oxidation level of the bilayers. We will also discuss electric field controlled magnetic properties in these systems. This work was supported in part by NSF (ECCS-1310338) and by C-SPIN, one of six centers of STARnet, a Semiconductor Research Corporation program, sponsored by MARCO and DARPA.

  11. Nonlinear analysis of cylindrical capacitive sensor used for measuring high precision spindle rotation errors

    Science.gov (United States)

    Xiang, Kui; Wang, Wen; Zhang, Min; Lu, Keqing; Fan, Zongwei; Chen, Zichen

    2015-02-01

    A novel cylindrical capacitive sensor (CCS) with differential, symmetrical and integrated structure was proposed to measure multi-degree-of-freedom rotation errors of high precision spindle simultaneously and to reduce impacts of multiple sensors installation errors on the measurement accuracy. The nonlinear relationship between the output capacitance of CCS and the radial gap was derived using the capacitance formula and was quantitatively analyzed. It was found through analysis that the thickness of curved electrode plates led to the existence of fringe effect. The influence of the fringe effect on the output capacitance was investigated through FEM simulation. It was found through analysis and simulation that the CCS could be optimized to improve the measurement accuracy.

  12. A High Resolution Capacitive Sensing System for the Measurement of Water Content in Crude Oil

    Directory of Open Access Journals (Sweden)

    Muhammad Zubair Aslam

    2014-06-01

    Full Text Available This paper presents the design of a non-intrusive system to measure ultra-low water content in crude oil. The system is based on a capacitance to phase angle conversion method. Water content is measured with a capacitance sensor comprising two semi-cylindrical electrodes mounted on the outer side of a glass tube. The presence of water induces a capacitance change that in turn converts into a phase angle, with respect to a main oscillator. A differential sensing technique is adopted not only to ensure high immunity against temperature variation and background noise, but also to eliminate phase jitter and amplitude variation of the main oscillator that could destabilize the output. The complete capacitive sensing system was implemented in hardware and experiment results using crude oil samples demonstrated that a resolution of ±50 ppm of water content in crude oil was achieved by the proposed design.

  13. High-capacitance organic nanodielectrics: effective medium models of their response.

    Science.gov (United States)

    DiBenedetto, Sara A; Paci, Irina; Facchetti, Antonio; Marks, Tobin J; Ratner, Mark A

    2006-11-16

    Molecular and macromolecular high-permittivity organic gate dielectric materials have been the focus of recent experimental research as a consequence of their promising properties for organic and inorganic field effect transistor (FET) applications. Two types of molecular thin films, self-assembled nanodielectrics (SANDs) and cross-linked polymer blends (CPBs), have been shown experimentally to afford high capacitances and low FET operating voltages. In an effort to design optimized nanostructures having even larger capacitances, lower leakage current densities, and further reduced FET operating voltages, we discuss approaches for computing the effective permittivities of each nanodielectric motif and investigate how molecular arrangements impact overall device capacitance. The calculated frequency-dependent capacitances, derived from Maxwell-Wagner theory applied to the Maxwell-Garnett effective medium approximation, agree fairly well with the experimental values for the two types of nanodielectrics. Predictions of larger capacitance SANDs are made with the two-capacitors-in-series equivalent circuit, where the layered, self-assembled structure is viewed as two different capacitors. The Maxwell-Garnett and Polder-Van Santen effective medium approximations are used to predict the dielectric response of higher permittivity polymer cross-linked blends. In calculations showing good agreement between theory and experiment, and with all parameters being equal, it is found that greater capacitances should be achievable with cross-linked composites than with layered composites.

  14. Electropolymerized Star-Shaped Benzotrithiophenes Yield π-Conjugated Hierarchical Networks with High Areal Capacitance

    KAUST Repository

    Ringk, Andreas

    2016-03-30

    High-surface-area π-conjugated polymeric networks have the potential to lend outstanding capacitance to supercapacitors because of the pronounced faradaic processes that take place across the dense intimate interface between active material and electrolytes. In this report, we describe how benzo[1,2-b:3,4-b’:5,6-b’’]trithiophene (BTT) and tris-EDOT-benzo[1,2-b:3,4-b’:5,6-b’’]trithiophene (TEBTT) can serve as 2D (trivalent) building blocks in the development of electropolymerized hierarchical π-conjugated frameworks with particularly high areal capacitance. In comparing electropolymerized networks of BTT, TEBTT, and their copolymers with EDOT, we show that P(TEBTT/EDOT)-based frameworks can achieve higher areal capacitance (e.g., as high as 443.8 mF cm-2 at 1 mA cm-2) than those achieved by their respective homopolymers (PTEBTT and PEDOT) in the same experimental conditions of electrodeposition (PTEBTT: 271.1 mF cm-2 (at 1 mA cm-2) and PEDOT: 12.1 mF cm-2 (at 1 mA cm-2)). For example, P(TEBTT/EDOT)-based frameworks synthesized in a 1:1 monomer-to-comonomer ratio show a ca. 35x capacitance improvement over PEDOT. The high areal capacitance measured for P(TEBTT/EDOT) copolymers can be explained by the open, highly porous hierarchical morphologies formed during the electropolymerization step. With >70% capacitance retention over 1,000 cycles (up to 89% achieved), both PTEBTT- and P(TEBTT/EDOT)-based frameworks are resilient to repeated electrochemical cycling and can be considered promising systems for high life cycle capacitive electrode applications.

  15. Novel High Temperature Capacitive Pressure Sensor Utilizing SiC Integrated Circuit Twin Ring Oscillators

    Science.gov (United States)

    Scardelletti, M.; Neudeck, P.; Spry, D.; Meredith, R.; Jordan, J.; Prokop, N.; Krasowski, M.; Beheim, G.; Hunter, G.

    2017-01-01

    This paper describes initial development and testing of a novel high temperature capacitive pressure sensor system. The pressure sensor system consists of two 4H-SiC 11-stage ring oscillators and a SiCN capacitive pressure sensor. One oscillator has the capacitive pressure sensor fixed at one node in its feedback loop and varies as a function of pressure and temperature while the other provides a pressure-independent reference frequency which can be used to temperature compensate the output of the first oscillator. A two-day repeatability test was performed up to 500C on the oscillators and the oscillator fundamental frequency changed by only 1. The SiCN capacitive pressure sensor was characterized at room temperature from 0 to 300 psi. The sensor had an initial capacitance of 3.76 pF at 0 psi and 1.75 pF at 300 psi corresponding to a 54 change in capacitance. The integrated pressure sensor system was characterized from 0 to 300 psi in steps of 50 psi over a temperature range of 25 to 500C. The pressure sensor system sensitivity was 0.113 kHzpsi at 25C and 0.026 kHzpsi at 500C.

  16. Holey graphene hydrogel with in-plane pores for high-performance capacitive desalination

    Institute of Scientific and Technical Information of China (English)

    Weiqing Kong; Xidong Duan; Yongjie Ge; Hongtao Liu; Jiawen Hu; Xiangfeng Duan

    2016-01-01

    Capacitive deionization is an attractive approach to water desalination and treatment.To achieve efficient capacitative desalination,rationally designed electrodes with high specific capacitances,conductivities,and stabilities are necessary.Here we report the construction of a three-dimensional (3D) holey graphene hydrogel (HGH).This material contains abundant in-plane pores,offering efficient ion transport pathways.Furthermore,it forms a highly interconnected network of graphene sheets,providing efficient electron transport pathways,and its 3D hierarchical porous structure can provide a large specific surface area for the adsorption and storage of ions.Consequently,HGH serves as a binder-free electrode material with excellent electrical conductivity.Cyclic voltammetry (CV) measurements indicate that the optimized HGH can achieve specific capacitances of 358.4 F.g-1 in 6 M KOH solution and 148 F.g-1 in 0.5 M NaC1 solution.Because of these high capacitances,HGH has a desalination capacity as high as 26.8 mg.g-1 (applied potential:1.2 V;initial NaCl concentration:~5,000 mg.L-1).

  17. Anomalously high capacitance of β-rhombohedral boron induced by structural defects

    Science.gov (United States)

    Tsagareishvili, Otar; Gabunia, Domenti; Chkhartishvili, Levan

    2009-06-01

    Capacitance and dielectric loss tangent measurements have been carried out for β-rhombohedral boron within the frequency range 102 - 104 Hz and temperature interval 77 - 373 K. Different specimens were studied: high-purity macrocrystals, vapor-liquid-grown faceted crystals, zone-melted single crystals, and crucible-melted polycrystals. Within the whole ranges of measurements, the capacitance of all samples was 10-60 times larger than their geometric capacitance. Temperature dependences of the capacitance reveal two-level step-like behavior. Location of levels is independent from the applied electric field frequency, but at higher frequencies, the capacitance steps shift to lower temperatures. For all frequencies, an abrupt rise in capacitance takes place at one and same temperature ~ 290 K. At low temperature, dielectric losses are negligible, but they increase towards the room temperature. At ~ 290 K (i.e., simultaneously with the abrupt rise in capacitance) their value abruptly falls down. Dielectric properties of β-rhombohedral boron are discussed on the basis of generalized barrier model of the heterogeneous semiconductor within its three-layer version. Planar defects like twins and stacking faults characteristic for real crystals are assumed to produce local elastic stresses sufficient for the local lowering in conductivity due to the piezoresistive effect. Consequently, layers adjacent to the planar defects should represent low-conducting inclusions in the relatively high-conducting matrix. In addition, the lesser-conducting barrier layers should appear at their boundaries. Effect at ~ 290 K seems to be related with a symmetry-restoring phase transition driven by the occupation patterns of certain atomic sites in β-rhombohedral crystalline boron lattice.

  18. Layout Capacitive Coupling and Structure Impacts on Integrated High Voltage Power MOSFETs

    DEFF Research Database (Denmark)

    Fan, Lin; Knott, Arnold; Jørgensen, Ivan Harald Holger

    2016-01-01

    -to-layer coupling and the comparison of the layout impacts have not been well established. This paper presents modeling of parasitic mutual coupling to analyze the parasitic capacitance directly coupled between two on-chip metal wires. The accurate 3D field solver analysis for the comparable dimensions shows......The switching performances of the integrated high voltage power MOSFETs that have prevailing interconnection matrices are being heavily influenced by the parasitic capacitive coupling of on-chip metal wires. The mechanism of the side-byside coupling is generally known, however, the layer...

  19. Highly sensitive devices for primary signal processing of the micromechanical capacitive transducers

    Science.gov (United States)

    Konoplev, B.; Ryndin, E.; Lysenko, I.; Denisenko, M.; Isaeva, A.

    2016-12-01

    A method of signal processing devices design for micromechanical accelerometers with capacitive transducers is proposed. This method provides the complex solution of the sensibility increasing and noise immunity problems by finding of the difference frequency of signals, which are formed by two identical generators with micromechanical capacitive transducers in frequency control circuits. In this study the analog and digital versions of the highly sensitive signal processing devices circuits with frequency output were developed. The breadboards of these devices are fabricated and studied and the project of their integral realization is designed.

  20. L10-Ordered Thin Films with High Perpendicular Magnetic Anisotropy for STT-MRAM Applications

    Science.gov (United States)

    Huang, Efrem Yuan-Fu

    The objective of the research conducted herein was to develop L10-ordered materials and thin film stack structures with high perpendicular magnetic anisotropy (PMA) for spin-transfertorque magnetoresistive random access memory (STT-MRAM) applications. A systematic approach was taken in this dissertation, culminating in exchange coupled L1 0-FePt and L10- MnAl heterogeneous structures showing great promise for developing perpendicular magnetic tunnel junctions (pMTJs) with both high thermal stability and low critical switching current. First, using MgO underlayers on Si substrates, sputtered MnAl films were systematically optimized, ultimately producing a Si substrate/MgO (20 nm)/MnAl (30)/Ta (5) film stack with a high degree of ordering and large PMA. Next, noting the incompatibility of insulating MgO underlayers with industrial-scale CMOS processes, attention was turned to using conductive underlayers. TiN was found to excel at promoting growth of L10-MnAl, with optimized films showing improved magnetic properties over those fabricated on MgO underlayers. The use of different post-annealing processes was then studied as an alternative to in situ annealing. Rapid thermal annealing (RTA) was found to produce PMA in films at lower annealing temperatures than tube furnace annealing, but tube furnace annealing produced films with higher maximum PMA than RTA. While annealed samples had lower surface roughness than those ordered by high in situ deposition temperatures, relying solely on annealing to achieve L10-ordering resulted drastically reduced PMA. Finally, heterogeneous L10-ordered FePt/MgO/MnAl film stacks were explored for pMTJs. Film stacks with MgO barrier layers thinner than 2 nm showed significant interdiffusion between the FePt and MnAl, while film stacks with thicker MgO barrier layers exhibited good ordering and high PMA in both the FePt and MnAl films. It is believed that this limitation is caused by the roughness of the underlying FePt, which was thicker

  1. Nonlinear Parasitic Capacitance Modelling of High Voltage Power MOSFETs in Partial SOI Process

    DEFF Research Database (Denmark)

    Fan, Lin; Knott, Arnold; Jørgensen, Ivan Harald Holger

    2016-01-01

    : off-state, sub-threshold region, and on-state in the linear region. A high voltage power MOSFET is designed in a partial Silicon on Insulator (SOI) process, with the bulk as a separate terminal. 3D plots and contour plots of the capacitances versus bias voltages for the transistor summarize...

  2. Theory, technology and assembly of a highly symmetrical capacitive triaxial accelerometer

    NARCIS (Netherlands)

    Lotters, Joost Conrad; Lötters, Joost Conrad; Olthuis, Wouter; Veltink, Petrus H.; Bergveld, Piet

    1997-01-01

    A highly symmetrical cubic easy-to-assemble capacitive triaxial accelerometer for biomedical applications has been designed, realized and tested. The outer dimensions of the sensor are 5×5×5 mm 3 and the device is mounted on a standard IC package. New aspects of the sensor are an easy assembly

  3. Design, fabrication and characterization of a highly symmetrical capacitive triaxial accelerometer

    NARCIS (Netherlands)

    Lotters, Joost Conrad; Bomer, Johan G.; Verloop, A.J.; Droog, Adriaan; Olthuis, Wouter; Veltink, Petrus H.; Bergveld, Piet

    1998-01-01

    A highly symmetrical cubic capacitive triaxial accelerometer for biomedical applications has been designed, fabricated and characterized. The outer dimensions of the sensors are 5 mm × 5 mm × 5 mm. The devices are mounted on a standard IC package for easy testing. Features of the triaxial

  4. Bidirectional Flyback Converter with Multiple Series Connected Outputs for High Voltage Capacitive Charge and Discharge Applications

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Schneider, Henrik; Zhang, Zhe;

    2015-01-01

    This paper evaluates two different implementations of a bidirectional flyback converter for driving a capacitive electro active actuator, which must be charged and discharged from 0 V to 2.5 kV DC and vice versa, supplied from a 24 V battery. In one implementation, a high voltage MOSFET (4 kV) in...

  5. High perpendicular magnetic anisotropy in D022-Mn3+xGe tetragonal Heusler alloy films

    Science.gov (United States)

    Sugihara, A.; Mizukami, S.; Yamada, Y.; Koike, K.; Miyazaki, T.

    2014-03-01

    We prepared D022-Mn3+xGe (-0.67 ≤ x ≤ 0.35) epitaxial thin films on MgO(001) substrates with Cr(001) buffer layers and systematically investigated the dependence of their perpendicular magnetic anisotropy constant, saturation magnetization, coercivity, and tetragonal axial ratio (c/a) on their composition and substrate temperature. Single-phase D022 crystal structures were formed in films with compositions of 0 ≤ x ≤ 0.35, prepared at 400 °C. The D022-Mn3Ge films exhibited perpendicular magnetization with a magnetic squareness close to unity. Performing magnetic torque measurements at an applied field of 140 kOe, we estimated a perpendicular magnetic anisotropy constant of 11.8 ± 0.5 Merg/cm3, the highest and the most reliable value yet reported.

  6. Energy Conversion Mechanism for Electron Perpendicular Energy in High Guide-Field Reconnection

    Science.gov (United States)

    Guo, Xuehan; Horiuchi, Ritoku; Kaminou, Yasuhiro; Cheng, Frank; Ono, Yasushi

    2016-10-01

    The energy conversion mechanism for electron perpendicular energy, both the thermal and the kinetic energy, is investigated by means of two-dimensional, full-particle simulations in an open system. It is shown that electron perpendicular heating is mainly due to the breaking of magnetic moment conservation in separatrix region because the charge separation generates intense variation of electric field within the electron Larmor radius. Meanwhile, electron perpendicular acceleration takes place manly due to the polarization drift term as well as the curvature drift term of E . u⊥ in the downstream near the X-point. The enhanced electric field due to the charge separation there results in a significant effect of the polarization drift term on the dissipation of magnetic energy within the ion inertia length in the downstream. Japan Society for the Promotion of Science (JSPS) Fellows 15J03758.

  7. Ambient-processable high capacitance hafnia-organic self-assembled nanodielectrics.

    Science.gov (United States)

    Everaerts, Ken; Emery, Jonathan D; Jariwala, Deep; Karmel, Hunter J; Sangwan, Vinod K; Prabhumirashi, Pradyumna L; Geier, Michael L; McMorrow, Julian J; Bedzyk, Michael J; Facchetti, Antonio; Hersam, Mark C; Marks, Tobin J

    2013-06-19

    Ambient and solution-processable, low-leakage, high capacitance gate dielectrics are of great interest for advances in low-cost, flexible, thin-film transistor circuitry. Here we report a new hafnium oxide-organic self-assembled nanodielectric (Hf-SAND) material consisting of regular, alternating π-electron layers of 4-[[4-[bis(2-hydroxyethyl)amino]phenyl]diazenyl]-1-[4-(diethoxyphosphoryl) benzyl]pyridinium bromide) (PAE) and HfO2 nanolayers. These Hf-SAND multilayers are grown from solution in ambient with processing temperatures ≤150 °C and are characterized by AFM, XPS, X-ray reflectivity (2.3 nm repeat spacing), X-ray fluorescence, cross-sectional TEM, and capacitance measurements. The latter yield the largest capacitance to date (1.1 μF/cm(2)) for a solid-state solution-processed hybrid inorganic-organic gate dielectric, with effective oxide thickness values as low as 3.1 nm and have gate leakage 0.2 mm(2)) on Hf-SAND (6.5 nm thick) achieve mA on currents at ultralow gate voltages (nanodielectric. High-temperature annealing in ambient (400 °C) has limited impact on Hf-SAND leakage densities (<10(-6) A/cm(2) at ±2 V) and enhances Hf-SAND multilayer capacitance densities to nearly 1 μF/cm(2), demonstrating excellent compatibility with device postprocessing methodologies. These results represent a significant advance in hybrid organic-inorganic dielectric materials and suggest synthetic routes to even higher capacitance materials useful for unconventional electronics.

  8. Direct Reduction of Graphene Oxide by Ni Foam as a High-Capacitance Supercapacitor Electrode.

    Science.gov (United States)

    Yang, Jing; Zhang, Enwei; Li, Xiaofeng; Yu, Yunhua; Qu, Jin; Yu, Zhong-Zhen

    2016-01-27

    Three dimensional reduced graphene oxide (RGO)/Ni foam composites are prepared by a facile approach without using harmful reducing agents. Graphene oxide is reduced by Ni foam directly in its aqueous suspension at pH 2 at room temperature, and the resultant RGO sheets simultaneously assemble around the pillars of the Ni foam. The RGO/Ni foam composite is used as a binder-free supercapacitor electrode and exhibits high electrochemical properties. Its areal capacitance is easily tuned by varying the reduction time for different RGO loadings. When the reduction time increases from 3 to 15 days, the areal capacitance of the composite increases from 26.0 to 136.8 mF cm(-2) at 0.5 mA cm(-2). Temperature is proven to be a key factor in influencing the reduction efficiency. The composite prepared by 5 h reduction at 70 °C exhibits even better electrochemical properties than its counterpart prepared by 15 day reduction at ambient temperature. The 5 h RGO/Ni foam composite shows an areal capacitance of 206.7 mF cm(-2) at 0.5 mA cm(-2) and good rate performance and cycling stability with areal capacitance retention of 97.4% after 10000 cycles at 3 mA cm(-2). Further extending the reduction time to 9 h at 70 °C, the composite shows a high areal capacitance of 323 mF cm(-2) at 0.5 mA cm(-2). Moreover, the good rate performance and cycling stability are still maintained.

  9. Capacitance of High-Voltage Coaxial Cable in Plasma Immersion Ion Implantation

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    Plasma immersion ion implantation (PIII) is an excellent technique for the surface modification of complex-shaped components. Owing to pulsed operation mode of the high voltage and large slew rate, the capacitance on the high-voltage coaxial cable can be detrimental to the processand cannot be ignored. In fact, a significant portion of the rise-time/fall-time of the implantation voltage pulse and big initial current can be attributed to the coaxial cable.

  10. MnxGa1-x nanodots with high coercivity and perpendicular magnetic anisotropy

    Science.gov (United States)

    Karel, J.; Casoli, F.; Lupo, P.; Celegato, F.; Sahoo, R.; Ernst, B.; Tiberto, P.; Albertini, F.; Felser, C.

    2016-11-01

    A MnxGa1-x (x = 0.70) epitaxial thin film with perpendicular magnetic anisotropy and a large coercivity (μ0Hc = 1 T) was patterned into nanodots using a combined self-assembly nanolithography and plasma etching procedure. Nanostructuring is achieved by self-assembly of polystyrene nanospheres acting as a mask on the magnetic film. This procedure allows easy patterning of a large area although introduced some chemical disorder, which resulted in a soft magnetic component in the magnetic hysteresis loops. However, chemical order was recovered after vacuum annealing at low temperature. The resulting nanodots retain the properties of the original film, i.e. magnetization oriented perpendicular to the particle and large coercivity. Our results suggest this lithography procedure could be a promising direction for nanostructuring tetragonal Heusler alloys.

  11. Conductive two-dimensional titanium carbide `clay' with high volumetric capacitance

    Science.gov (United States)

    Ghidiu, Michael; Lukatskaya, Maria R.; Zhao, Meng-Qiang; Gogotsi, Yury; Barsoum, Michel W.

    2014-12-01

    Safe and powerful energy storage devices are becoming increasingly important. Charging times of seconds to minutes, with power densities exceeding those of batteries, can in principle be provided by electrochemical capacitors--in particular, pseudocapacitors. Recent research has focused mainly on improving the gravimetric performance of the electrodes of such systems, but for portable electronics and vehicles volume is at a premium. The best volumetric capacitances of carbon-based electrodes are around 300 farads per cubic centimetre; hydrated ruthenium oxide can reach capacitances of 1,000 to 1,500 farads per cubic centimetre with great cyclability, but only in thin films. Recently, electrodes made of two-dimensional titanium carbide (Ti3C2, a member of the `MXene' family), produced by etching aluminium from titanium aluminium carbide (Ti3AlC2, a `MAX' phase) in concentrated hydrofluoric acid, have been shown to have volumetric capacitances of over 300 farads per cubic centimetre. Here we report a method of producing this material using a solution of lithium fluoride and hydrochloric acid. The resulting hydrophilic material swells in volume when hydrated, and can be shaped like clay and dried into a highly conductive solid or rolled into films tens of micrometres thick. Additive-free films of this titanium carbide `clay' have volumetric capacitances of up to 900 farads per cubic centimetre, with excellent cyclability and rate performances. This capacitance is almost twice that of our previous report, and our synthetic method also offers a much faster route to film production as well as the avoidance of handling hazardous concentrated hydrofluoric acid.

  12. Conductive two-dimensional titanium carbide 'clay' with high volumetric capacitance.

    Science.gov (United States)

    Ghidiu, Michael; Lukatskaya, Maria R; Zhao, Meng-Qiang; Gogotsi, Yury; Barsoum, Michel W

    2014-12-04

    Safe and powerful energy storage devices are becoming increasingly important. Charging times of seconds to minutes, with power densities exceeding those of batteries, can in principle be provided by electrochemical capacitors--in particular, pseudocapacitors. Recent research has focused mainly on improving the gravimetric performance of the electrodes of such systems, but for portable electronics and vehicles volume is at a premium. The best volumetric capacitances of carbon-based electrodes are around 300 farads per cubic centimetre; hydrated ruthenium oxide can reach capacitances of 1,000 to 1,500 farads per cubic centimetre with great cyclability, but only in thin films. Recently, electrodes made of two-dimensional titanium carbide (Ti3C2, a member of the 'MXene' family), produced by etching aluminium from titanium aluminium carbide (Ti3AlC2, a 'MAX' phase) in concentrated hydrofluoric acid, have been shown to have volumetric capacitances of over 300 farads per cubic centimetre. Here we report a method of producing this material using a solution of lithium fluoride and hydrochloric acid. The resulting hydrophilic material swells in volume when hydrated, and can be shaped like clay and dried into a highly conductive solid or rolled into films tens of micrometres thick. Additive-free films of this titanium carbide 'clay' have volumetric capacitances of up to 900 farads per cubic centimetre, with excellent cyclability and rate performances. This capacitance is almost twice that of our previous report, and our synthetic method also offers a much faster route to film production as well as the avoidance of handling hazardous concentrated hydrofluoric acid.

  13. Fabrication of fast, highly sensitive all-printed capacitive humidity sensors with carbon nanotube/polyimide hybrid electrodes

    Science.gov (United States)

    Itoh, Eiji; Takada, Akinori

    2016-02-01

    We have developed capacitive humidity sensors with highly gas permeable carbon nanotube top electrodes using solution techniques. The hydrophobic, porous carbon nanotube (CNT) network with polyimide as a binder was suitable for gas permeation, and the response of the capacitive humidity sensors was faster than that of the device with a 20-nm-thick Au top electrode. The capacitance change of the polymide capacitive humidity sensor with the printed CNT top electrode was almost proportional to the relative humidity and the capacitance was almost independent of the environmental temperature. The CNT electrodes strongly adhered to the partially fluorinated polyimide when CNT/polyimide nanocomposites were used as top electrodes. The response time was almost proportional to the square of the thickness of the polyimide dielectric layer, d, and the sensitivity was inversely proportional to d. The response time and sensitivity respectively decreased to less than 1 s and 1 pF/%RH in the device with d less than 1 µm.

  14. Studying tantalum-based high-κ dielectrics in terms of capacitance measurements

    Science.gov (United States)

    Stojanovska-Georgievska, L.

    2016-08-01

    The trend of rapid development of microelectronics towards nano-miniaturization dictates the inevitable introduction of dielectrics with high permittivity (high-κ dielectrics), as alternative material for replacing SiO2. Therefore, studying these materials in terms of their characteristics, especially in terms of reliability, is of great importance for proper design and manufacture of devices. In this paper, alteration of capacitance in different frequency regimes is used, in order to determine the overall behavior of the material. Samples investigated here are MOS structures containing nanoscale tantalum based dielectrics. Layers of pure Ta2O5, but also Hf and Ti doped tantalum pentoxide, i.e. Ta2O5:Hf and Ta2O5:Ti are studied here. All samples are considered as ultrathin oxide layers with thicknesses less than 15 nm, obtained by radio frequent sputtering on p-type silicon substrate. Measuring capacitive characteristics enables determination of several specific parameters of the structures. The obtained results for capacitance in accumulation, the thickness and time evolution of the interfacial SiO2 layer, values of flatband and threshold voltage, density of oxide charges, interfacial and border states, and reliability properties favor the possibilities for more intensive use of studied materials in new nanoelectronic technologies.

  15. Highly defective graphite for scalable synthesis of nitrogen doped holey graphene with high volumetric capacitance

    Science.gov (United States)

    Zhang, Yijie; Ji, Lei; Li, Wanfei; Zhang, Zhao; Lu, Luhua; Zhou, Lisha; Liu, Jinghai; Chen, Ying; Liu, Liwei; Chen, Wei; Zhang, Yuegang

    2016-12-01

    Manipulating basal plane structure of graphene for advanced energy conversion materials design has been research frontier in recent years. By extending size of defects in the basal plane of graphene from atomic scale to nanoscale, graphene with in-plane holes can be synthesized by multiple steps oxidation and reduction of defective graphene oxide at low concentration. These complicated and low yield synthetic methods largely limited research and applications of holey graphene based high performance energy conversion materials. Inspired by graphene in-plane holes formation mechanism, an easy and scalable synthetic approach has been proposed in this work. By oxidizing widely available defective graphite mineral under high concentration, holey graphene oxide has been scalable synthesized. Through simple reduction of holey graphene oxide, nitrogen doped holey graphene with high volumetric capacitance of 439 F/cm3 was obtained. We believe this breakthrough can provide a feasible synthetic approach for further exploring the properties and performance of holey graphene based materials in variety of fields.

  16. Rescaling metal molybdate nanostructures with biopolymer for energy storage having high capacitance with robust cycle stability.

    Science.gov (United States)

    Minakshi, Manickam; Barmi, Maryam J; Jones, Robert T

    2017-03-14

    Hybrid capacitors can replace or complement batteries, while storing energy through ion adsorption and fast surface redox reactions. There is a growing demand in developing nanostructured materials as electrodes for hybrid systems that can enhance the specific capacitance by ion desolvation in the nanopores. Here, we demonstrate that rescaling the pore diameter with the aid of biopolymer at an optimal level during the synthesis of metal molybdate leads to high capacitance 124 F g(-1) giving robust capacitance retention of 80% over 2000 cycles for a constructed device (activated carbon vs. metal molybdate). The presence of biopolymer (l-glutamic acid) in the metal molybdate acts as a complexing agent of the metal ion while enhancing the mass transport and hence it's improved electrochemical performance. However, XPS and other elemental analyses illustrated no evidence for N doping but traces of other surface functional groups (i.e. C and O) could be present on the molybdate surface. The biopolymer synthetic approach has the advantage of yielding nanostructured material with a relatively narrow pore size distribution controlled by l-glutamic acid. This study will provide a generic route to rescale other metal molybdate, phosphate or oxide counterparts and be an added value to the database.

  17. In-situ polymerization of polyaniline on the surface of graphene oxide for high electrochemical capacitance

    Energy Technology Data Exchange (ETDEWEB)

    Li, Xinlu, E-mail: lixinlu@cqu.edu.cn; Zhong, Qineng; Zhang, Xinlin; Li, Tongtao; Huang, Jiamu

    2015-06-01

    Conducting polymer polyaniline (PANI) was in-situ polymerized on the surface of graphene oxide (GO) to form PANI encapsulating GO nanocomposites. The morphology and microstructure were examined by scanning electron microscopy, X-ray diffraction and N{sub 2} absorption/desorption analysis. Electrochemical properties were tested by cyclic voltammetry, galvanostatic charge/discharge cycles and electrochemical impedance spectroscopy. Experimental results showed that ethanol assisted the dispersion of GO in water and facilitated the diffusion of polymer monomers on GO. GO as a support material can provide sufficient reaction sites for the deposition of aniline to form the film-like GO/PANI composites. Capacitive performance illustrated that the in-situ polymerization of PANI on GO was effective in improving the specific capacitance and cycling stability. - Highlights: • GO/PANI nanocomposites were achieved by in-situ polymerization. • PANI was uniformly coated on the surface of GO with addition of ethanol. • GO/PANI show high specific capacitance and cycling stability.

  18. A compact and miniaturized high resolution capacitance dilatometer for measuring thermal expansion and magnetostriction.

    Science.gov (United States)

    Küchler, R; Bauer, T; Brando, M; Steglich, F

    2012-09-01

    We describe the design, construction, calibration, and two different applications of a miniature capacitance dilatometer. The device is suitable for thermal expansion and magnetostriction measurements from 300 K down to about 25 mK, with a resolution of 0.02 Å at low temperatures. The main body of the dilatometer is fabricated from a single block of a Be-Cu alloy by electrical discharge milling. This creates an extremely compact high-resolution measuring cell. We have successfully tested and operated dilatometers of this new type with the commonly used physical property measurement system by quantum design, as well as with several other cryogenic refrigeration systems down to 25 mK and in magnetic fields up to 20 T. Here, the capacitance is measured with a commercially available capacitance bridge. Using a piezoelectric rotator from Attocube Systems, the cell can be rotated at T = 25 mK inside of an inner vacuum chamber of 40 mm diameter. The miniaturized design for the one-axis rotation setup allows a rotation of 360°.

  19. Study of the capacitance technique for measuring high-temperature blade tip clearance on ceramic rotors

    Science.gov (United States)

    Barranger, John P.

    1993-01-01

    Higher operating temperatures required for increased engine efficiency can be achieved by using ceramic materials for engine components. Ceramic turbine rotors are subject to the same limitations with regard to gas path efficiency as their superalloy predecessors. In this study, a modified frequency-modulation system is proposed for the measurement of blade tip clearance on ceramic rotors. It is expected to operate up to 1370 C (2500 F), the working temperature of present engines with ceramic turbine rotors. The design of the system addresses two special problems associated with nonmetallic blades: the capacitance is less than that of a metal blade and the effects of temperature may introduce uncertainty with regard to the blade tip material composition. To increase capacitance and stabilize the measurement, a small portion of the rotor is modified by the application of 5-micron-thick platinum films. The platinum surfaces on the probe electrodes and rotor that are exposed to the high-velocity gas stream are coated with an additional 10-micron-thick protective ceramic topcoat. A finite-element method is applied to calculate the capacitance as a function of clearance.

  20. Calculation of Dielectric Response in Molecular Solids for High Capacitance Organic Dielectrics

    Science.gov (United States)

    Heitzer, Henry Matthew

    The dielectric response of a material is critically important in numerous scientific processes spanning the fields of biology, chemistry, materials science, and physics. While important across these fundamental disciplines, it remains difficult to determine theoretically the dielectric environment of a system. With recent advances in nanotechnology, biochemistry, and molecular electronics, it has become necessary to determine the dielectric response in molecular systems that are difficult to measure experimentally, such as nanoscale interfaces, highly disordered biological environments, or molecular materials that are difficult to synthesize. In these scenarios it is highly advantageous to determine the dielectric response through efficient and accurate calculations. A good example of where a theoretical prediction of dielectric response is critical is in the development of high capacitance molecular dielectrics. Molecular dielectrics offer the promise of cheap, flexible, and mass producible electronic devices when used in conjunction with organic semiconducting materials to form Organic Field Effect Transistors (OFETs). To date, molecular dielectrics suffer from poor dielectric properties resulting in low capacitances. A low capacitance dielectric material requires a much larger power source to operate the device in OFETs, leading to modest device performance. Development of better performing dielectric materials has been hindered due to the time it takes to synthesize and fabricate new molecular materials. An accurate and efficient theoretical technique could drastically decrease this time by screening potential dielectric materials and providing design rules for future molecular dielectrics. Here in, the methodology used to calculate dielectric properties of molecular materials is described. The validity of the technique is demonstrated on model systems, capturing the frequency dependence of the dielectric response and achieving quantitative accuracy compared

  1. Highly porous activated carbons from resource-recovered Leucaena leucocephala wood as capacitive deionization electrodes.

    Science.gov (United States)

    Hou, Chia-Hung; Liu, Nei-Ling; Hsi, Hsing-Cheng

    2015-12-01

    Highly porous activated carbons were resource-recovered from Leucaena leucocephala (Lam.) de Wit. wood through combined chemical and physical activation (i.e., KOH etching followed by CO2 activation). This invasive species, which has severely damaged the ecological economics of Taiwan, was used as the precursor for producing high-quality carbonaceous electrodes for capacitive deionization (CDI). Carbonization and activation conditions strongly influenced the structure of chars and activated carbons. The total surface area and pore volume of activated carbons increased with increasing KOH/char ratio and activation time. Overgasification induced a substantial amount of mesopores in the activated carbons. In addition, the electrochemical properties and CDI electrosorptive performance of the activated carbons were evaluated; cyclic voltammetry and galvanostatic charge/discharge measurements revealed a typical capacitive behavior and electrical double layer formation, confirming ion electrosorption in the porous structure. The activated-carbon electrode, which possessed high surface area and both mesopores and micropores, exhibited improved capacitor characteristics and high electrosorptive performance. Highly porous activated carbons derived from waste L. leucocephala were demonstrated to be suitable CDI electrode materials.

  2. Bidirectional Flyback Converter with Multiple Series Connected Outputs for High Voltage Capacitive Charge and Discharge Applications

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Schneider, Henrik; Zhang, Zhe

    2015-01-01

    This paper evaluates two different implementations of a bidirectional flyback converter for driving a capacitive electro active actuator, which must be charged and discharged from 0 V to 2.5 kV DC and vice versa, supplied from a 24 V battery. In one implementation, a high voltage MOSFET (4 k...... by lower voltage rating MOSFETs driven by a gate drive transformer. Simulation results to compare the operation of conventional and proposed converters are provided. The advantages of proposed implementation are improved energy efficiency and lower cost. Experimental results with two series connected...

  3. A highly elastic, capacitive strain gauge based on percolating nanotube networks.

    Science.gov (United States)

    Cohen, Daniel J; Mitra, Debkishore; Peterson, Kevin; Maharbiz, Michel M

    2012-04-11

    We present a highly elastic strain gauge based on capacitive sensing of parallel, carbon nanotube-based percolation electrodes separated by a dielectric elastomer. The fabrication, relying on vacuum filtration of single-walled carbon nanotubes and hydrophobic patterning of silicone, is both rapid and inexpensive. We demonstrate reliable, linear performance over thousands of cycles at up to 100% strain with less than 3% variability and the highest reported gauge factor for a device of this class (0.99). We further demonstrate use of this sensor in a robotics context to transduce joint angles.

  4. High and low frequency relaxation oscillations in a capacitive discharge plasma

    Institute of Scientific and Technical Information of China (English)

    Zhou Zhu-Wen; Sungjin Kim; Ji Shi-Yin; Sun Guang-Yu; Deng Ming-Sen

    2008-01-01

    Both high and low frequency relaxation oscillations have been observed in an argon capacitive discharge connected to a peripheral grounded chamber through a slot with dielectric spacers.The oscillations,observed from time-varying optical emission of the main discharge chamber,show,for example,a high frequency(46 kHz)relaxation oscillation at 100 mTorr,with an absorbed power near the peripheral breakdown,and a low frequency(2.7-3.7 Hz)oscillation,at a higher absorbed power.The high frequency oscillation is found to ignite a plasma in the slot,but usually not in the periphery.The high frequency oscillation is interpreted by using an electromagnetic model of the slot impedance,combined with the circuit analysis of the system including a matching network.The model is further developed by using a parallel connection of variable peripheral capacitance to analyse the low frequency oscillation.The results obtained from the model are in agreement with the experimental observations and indicate that a variety of behaviours are dependent on the matching conditions.

  5. Large enhancement of perpendicular magnetic anisotropy and high annealing stability by Pt insertion layer in (Co/Ni-based multilayers

    Directory of Open Access Journals (Sweden)

    Xi Chen

    2015-09-01

    Full Text Available We have investigated the influence of ultrathin Pt insertion layers on the perpendicular magnetic anisotropy (PMA and annealing stability of Ta/Pt/(Co/Ni×3/Co/Pt/Ta multilayered films. When the Pt layers were inserted at the Co/Ni interfaces, the PMA of the multilayered films decreased monotonically as the thickness of the Pt insertion layer (tPt was increased. However, when the Pt layers were inserted at the Ni/Co interfaces, the PMA increased from 1.39 × 106 to 3.5 × 106 erg/cm3 as tPt increased from 0 to 10 Å. Moreover, the multilayered film containing 6-Å-thick Pt insertion layers that inserted at the Ni/Co interfaces exhibited the highest annealing stability for PMA, which was up to temperature of 480 °C. We hypothesize that the introduced Pt/Co interfaces, due to the Pt insertion layers, are responsible for the enhanced PMA and high annealing stability. This study is particularly important for perpendicularly magnetized spintronic devices that require high PMA and high annealing stability.

  6. The world's smallest capacitive dilatometer, for high-resolution thermal expansion and magnetostriction in high magnetic fields

    Science.gov (United States)

    Küchler, R.; Wörl, A.; Gegenwart, P.; Berben, M.; Bryant, B.; Wiedmann, S.

    2017-08-01

    For the characterization of novel quantum phases of matter, it is often required to study materials under multi-extreme conditions, in particular down to very low temperatures and in very high magnetic fields. We developed the world's smallest high-resolution capacitive dilatometer suitable for temperatures down to 10 mK and usage in high magnetic fields up to 37.5 T. Despite the extreme miniaturization, the capacitive dilatometer can resolve length changes down to 0.01 Å. This is an unprecedented resolution in a capacitive dilatometer of this compact size. Many cryogenic devices have limited space. Due to the extremely reduced cell size (3 cm3, 12 g), implementation or new applications in many of these sample space lacking devices are now possible. As an important example, the minute device can now be rotated in any standard cryostat, including dilution refrigerators or the commercial physical property measurement system. The present super compact design provides also for high resolution thermal expansion and magnetostriction measurements in a 15.2 mm diameter tube, enabling its use in the 32 mm bore, 37.5 T Bitter magnet at the High Field Magnet Laboratory in Nijmegen down to a temperature of 300 mK.

  7. High resolution space quartz-flexure accelerometer based on capacitive sensing and electrostatic control technology.

    Science.gov (United States)

    Tian, W; Wu, S C; Zhou, Z B; Qu, S B; Bai, Y Z; Luo, J

    2012-09-01

    High precision accelerometer plays an important role in space scientific and technical applications. A quartz-flexure accelerometer operating in low frequency range, having a resolution of better than 1 ng/Hz(1/2), has been designed based on advanced capacitive sensing and electrostatic control technologies. A high precision capacitance displacement transducer with a resolution of better than 2 × 10(-6) pF/Hz(1/2) above 0.1 Hz, is used to measure the motion of the proof mass, and the mechanical stiffness of the spring oscillator is compensated by adjusting the voltage between the proof mass and the electrodes to induce a proper negative electrostatic stiffness, which increases the mechanical sensitivity and also suppresses the position measurement noise down to 3 × 10(-10) g/Hz(1/2) at 0.1 Hz. A high resolution analog-to-digital converter is used to directly readout the feedback voltage applied on the electrodes in order to suppress the action noise to 4 × 10(-10) g/Hz(1/2) at 0.1 Hz. A prototype of the quartz-flexure accelerometer has been developed and tested, and the preliminary experimental result shows that its resolution comes to about 8 ng/Hz(1/2) at 0.1 Hz, which is mainly limited by its mechanical thermal noise due to low quality factor.

  8. Polyaniline nanofiber sponge filled graphene foam as high gravimetric and volumetric capacitance electrode

    Science.gov (United States)

    Pedrós, J.; Boscá, A.; Martínez, J.; Ruiz-Gómez, S.; Pérez, L.; Barranco, V.; Calle, F.

    2016-06-01

    A 3D hierarchical porous composite structure is developed via the controlled electrodeposition of a polyaniline nanofiber sponge (PANI-NFS) that fills the pores of a chemical vapor deposited graphene foam (GF). The PANI-NFS/GF composite combines the efficient electronic transport in the GF scaffold (with 100-500 μm pore size) with the rapid diffusion of the electrolyte ions into the high-specific-surface-area and densely-packed PANI-NFS (with 100-500 nm pore size). The factor of 1000 in the pore hierarchy and the synergy between the materials, that form a supercapacitor composite electrode with an integrated extended current collector, lead to both very high gravimetric and volumetric capacitances. In particular, values of 1474 F g-1 and 86 F cm-3 for a GF filling factor of 11% (leading to an estimated value of 782 F cm-3 for 100%), respectively, are obtained at a current density of 0.47 A g-1. Moreover, the composite electrode presents a capacitance retention of 83% after 15000 cycles. This excellent behavior makes the PANI-NFS/GF composite electrodes very attractive for high-performance supercapacitors.

  9. A uniaxial stress capacitive dilatometer for high-resolution thermal expansion and magnetostriction under multiextreme conditions

    Science.gov (United States)

    Küchler, R.; Stingl, C.; Gegenwart, P.

    2016-07-01

    Thermal expansion and magnetostriction are directional dependent thermodynamic quantities. For the characterization of novel quantum phases of matter, it is required to study materials under multi-extreme conditions, in particular, down to very low temperatures, in very high magnetic fields or under high pressure. We developed a miniaturized capacitive dilatometer suitable for temperatures down to 20 mK and usage in high magnetic fields, which exerts a large spring force between 40 to 75 N on the sample. This corresponds to a uniaxial stress up to 3 kbar for a sample with cross section of (0.5 mm)2. We describe design and performance test of the dilatometer which resolves length changes with high resolution of 0.02 Å at low temperatures. The miniaturized device can be utilized in any standard cryostat, including dilution refrigerators or the commercial physical property measurement system.

  10. High perpendicular coercive field of CoFe{sub 2}O{sub 4} thin films deposited by PLD

    Energy Technology Data Exchange (ETDEWEB)

    Terzzoli, M.C.; Duhalde, S.; Jacobo, S.; Steren, L.; Moina, C

    2004-04-28

    Thin films of CoFe{sub 2}O{sub 4} were deposited on (1 0 0) Si and (1 0 0) MgO substrates by pulsed laser deposition (PLD). The X-ray analysis shows the existence of single-phase spinel structure. Thin films deposited on (1 0 0) MgO substrates are epitaxial and completely oriented in-plane and out of plane due to the small lattice mismatch between Co ferrite and MgO. The surface microstructure was probed by atomic force microscopy and we can describe it like a tidy mosaic of monocrystals. Surprisingly, the films grew on (1 0 0) Si using 355 nm, reveal a complete (1 1 1) orientation in spite of the native oxide of the substrate when deposited. The films deposited with 266 nm also were textured in the (1 1 1) but with less particulate on the surface. (1 0 0) films show at 35 K a perpendicular coercive field H{sub c} as high as 12.9 kOe, meanwhile for the (1 1 1) films H{sub c} was around 9 kOe. However, at room temperature, the (1 1 1) films deposited with 266 nm show a perpendicular coercive field of 5.1 kOe and a squareness of 0.86 which make them attractive for magneto-optic recording applications.

  11. Hydrothermal synthesis of nanostructured graphene/polyaniline composites as high-capacitance electrode materials for supercapacitors

    Science.gov (United States)

    Wang, Ronghua; Han, Meng; Zhao, Qiannan; Ren, Zonglin; Guo, Xiaolong; Xu, Chaohe; Hu, Ning; Lu, Li

    2017-03-01

    As known to all, hydrothermal synthesis is a powerful technique for preparing inorganic and organic materials or composites with different architectures. In this reports, by controlling hydrothermal conditions, nanostructured polyaniline (PANi) in different morphologies were composited with graphene sheets (GNS) and used as electrode materials of supercapacitors. Specifically, ultrathin PANi layers with total thickness of 10-20 nm are uniformly composited with GNS by a two-step hydrothermal-assistant chemical oxidation polymerization process; while PANi nanofibers with diameter of 50~100 nm are obtained by a one-step direct hydrothermal process. Benefitting from the ultrathin layer and porous structure, the sheet-like GNS/PANi composites can deliver specific capacitances of 532.3 to 304.9 F/g at scan rates of 2 to 50 mV/s. And also, this active material showed very good stability with capacitance retention as high as ~99.6% at scan rate of 50 mV/s, indicating a great potential for using in supercapacitors. Furthermore, the effects of hydrothermal temperatures on the electrochemical performances were systematically studied and discussed.

  12. Hydrothermal synthesis of nanostructured graphene/polyaniline composites as high-capacitance electrode materials for supercapacitors

    Science.gov (United States)

    Wang, Ronghua; Han, Meng; Zhao, Qiannan; Ren, Zonglin; Guo, Xiaolong; Xu, Chaohe; Hu, Ning; Lu, Li

    2017-01-01

    As known to all, hydrothermal synthesis is a powerful technique for preparing inorganic and organic materials or composites with different architectures. In this reports, by controlling hydrothermal conditions, nanostructured polyaniline (PANi) in different morphologies were composited with graphene sheets (GNS) and used as electrode materials of supercapacitors. Specifically, ultrathin PANi layers with total thickness of 10–20 nm are uniformly composited with GNS by a two-step hydrothermal-assistant chemical oxidation polymerization process; while PANi nanofibers with diameter of 50~100 nm are obtained by a one-step direct hydrothermal process. Benefitting from the ultrathin layer and porous structure, the sheet-like GNS/PANi composites can deliver specific capacitances of 532.3 to 304.9 F/g at scan rates of 2 to 50 mV/s. And also, this active material showed very good stability with capacitance retention as high as ~99.6% at scan rate of 50 mV/s, indicating a great potential for using in supercapacitors. Furthermore, the effects of hydrothermal temperatures on the electrochemical performances were systematically studied and discussed. PMID:28291246

  13. A New Triazine-Based Covalent Organic Framework for High-Performance Capacitive Energy Storage.

    Science.gov (United States)

    Bhanja, Piyali; Bhunia, Kousik; Das, Sabuj K; Pradhan, Debabrata; Kimura, Ryuto; Hijikata, Yuh; Irle, Stephan; Bhaumik, Asim

    2017-03-09

    The new covalent organic framework material TDFP-1 was prepared through a solvothermal Schiff base condensation reaction of the monomers 1,3,5-tris-(4-aminophenyl)triazine and 2,6-diformyl-4-methylphenol. Owing to its high specific surface area of 651 m(2)  g(-1) , extended π conjugation, and inherent microporosity, TDFP-1 exhibited an excellent energy-storage capacity with a maximum specific capacitance of 354 F g(-1) at a scan rate of 2 mV s(-1) and good cyclic stability with 95 % retention of its initial specific capacitance after 1000 cycles at 10 A g(-1) . The π-conjugated polymeric framework as well as ionic conductivity owing to the possibility of ion conduction inside the micropores of approximately 1.5 nm make polymeric TDFP-1 a favorable candidate as a supercapacitor electrode material. The electrochemical properties of this electrode material were measured through cyclic voltammetry, galvanic charge-discharge, and electrochemical impedance spectroscopy, and the results indicate its potential for application in energy-storage devices.

  14. Spinel LiMn2O4 nanohybrid as high capacitance positive electrode material for supercapacitors

    Science.gov (United States)

    Wang, F. X.; Xiao, S. Y.; Zhu, Y. S.; Chang, Z.; Hu, C. L.; Wu, Y. P.; Holze, R.

    2014-01-01

    A LiMn2O4 nanohybrid consisting of nanotubes, nanorods and nanoparticles has been synthesized using α-MnO2 nanotubes from hydrothermal reaction as a precursor. It is characterized with X-ray diffraction, field emission scanning electron and transmission electron microscopy. A formation mechanism is proposed. As a positive electrode material for supercapacitors, it exhibits a high specific discharge capacitance of 415 F g-1 at 0.5 A g-1 in 0.5 mol l-1 Li2SO4 aqueous solution. Even at 10 A g-1, it still has a specific discharge capacitance of 208 F g-1. The energy density of the asymmetric supercapacitor using activated carbon as the negative electrode and LiMn2O4-nanohybrid as the positive electrode in the aqueous solution in the voltage range of 0-1.8 V presents 29.8 Wh kg-1 at power density of 90 W kg-1. In addition, the cycling behavior of the asymmetric supercapacitor is good.

  15. A method for canopy water content estimation for highly vegetated surfaces-shortwave infrared perpendicular water stress index

    Institute of Scientific and Technical Information of China (English)

    GHULAM; Abduwasit; LI; Zhao-Liang; QIN; QiMing; TONG; QingXi; WANG; JiHua; KASIMU; Alimujiang; ZHU; Lin

    2007-01-01

    In this paper, a new method for canopy water content (FMC) estimation for highly vegetated surfaces- shortwave infrared perpendicular water stress index (SPSI) is developed using NIR, SWIR wavelengths of Enhanced Thematic Mapper Plus (ETM+) on the basis of spectral features and distribution of surface targets with different water conditions in NIR-SWIR spectral space. The developed method is further explored with radiative transfer simulations using PROSPECT, Lillesaeter, SailH and 6S. It is evident from the results of validation derived from satellite synchronous field measurements that SPSI is highly correlated with FMC, coefficient of determination (R squared) and root mean square error are 0.79 and 26.41%. The paper concludes that SPSI has a potential in vegetation water content estimation in terms of FMC.

  16. Strong interlayer exchange coupling and high post-annealing stability in perpendicularly magnetized [Pt/Co]/Ru/[Co/Pt] structures

    Directory of Open Access Journals (Sweden)

    Seok Jin Yun

    2016-02-01

    Full Text Available Strong interlayer exchange coupling (IEC and high post-annealing stability are demonstrated for perpendicular synthetic ferrimagnets (p-SyFs with [Pt/Co]6/Ru/[Co/Pt]3 structures. The observed IEC strength was 2.55 ergs/cm2 for a Ru thickness of 0.35 nm, representing the highest value achieved up to date for similar structures. The IEC remained strong even after annealing at 450oC, for the practically important Ru layer thickness of 0.85 nm. The biquadratic IEC, a parameter quantifying the pinhole effects in SyFs, was confirmed by analyzing the experimental results by using the total energy functional, and its strength increased with decreasing the temperature and Ru layer thickness.

  17. Dynamic resistance of a high-T c coated conductor wire in a perpendicular magnetic field at 77 K

    Science.gov (United States)

    Jiang, Zhenan; Toyomoto, Ryuki; Amemiya, Naoyuki; Zhang, Xingyou; Bumby, Chris W.

    2017-03-01

    Superconducting high-T c coated conductor (CC) wires comprise a ceramic thin film with a large aspect ratio. This geometry can lead to significant dissipative losses when exposed to an alternating magnetic field. Here we report experimental measurements of the ‘dynamic resistance’ of commercially available SuperPower and Fujikura CC wires in an AC perpendicular field. The onset of dynamic resistance occurs at a threshold field amplitude, which is determined by the total DC transport current and the penetration field of the conductor. We show that the field-dependence of the normalised magnetisation loss provides an unambiguous value for this threshold field at zero transport current. From this insight we then obtain an expression for the dynamic resistance in perpendicular field. This approach implies a linear relationship between dynamic resistance and applied field amplitude, and also between threshold field and transport current and this is consistent with our experimental data. The analytical expression obtained yields values that closely agree with measurements obtained across a wide range of frequencies and transport currents, and for multiple CC wires produced by different wire manufacturers and with significantly differing dimensions and critical currents. We further show that at high transport currents, the measured DC resistance includes an additional nonlinear term which is due to flux-flow resistance incurred by the DC transport current. This occurs once the field-dependent critical current of the wire falls below the DC transport current for part of each field cycle. Our results provide an effective and simple approach to calculating the dynamic resistance of a CC wire, at current and field magnitudes consistent with those expected in superconducting machines.

  18. Termination layer compensated tunnelling magnetoresistance in ferrimagnetic Heusler compounds with high perpendicular magnetic anisotropy.

    Science.gov (United States)

    Jeong, Jaewoo; Ferrante, Yari; Faleev, Sergey V; Samant, Mahesh G; Felser, Claudia; Parkin, Stuart S P

    2016-01-18

    Although high-tunnelling spin polarization has been observed in soft, ferromagnetic, and predicted for hard, ferrimagnetic Heusler materials, there has been no experimental observation to date of high-tunnelling magnetoresistance in the latter. Here we report the preparation of highly textured, polycrystalline Mn3Ge films on amorphous substrates, with very high magnetic anisotropy fields exceeding 7 T, making them technologically relevant. However, the small and negative tunnelling magnetoresistance that we find is attributed to predominant tunnelling from the lower moment Mn-Ge termination layers that are oppositely magnetized to the higher moment Mn-Mn layers. The net spin polarization of the current reflects the different proportions of the two distinct termination layers and their associated tunnelling matrix elements that result from inevitable atomic scale roughness. We show that by engineering the spin polarization of the two termination layers to be of the same sign, even though these layers are oppositely magnetized, high-tunnelling magnetoresistance is possible.

  19. Termination layer compensated tunnelling magnetoresistance in ferrimagnetic Heusler compounds with high perpendicular magnetic anisotropy

    Science.gov (United States)

    Jeong, Jaewoo; Ferrante, Yari; Faleev, Sergey V.; Samant, Mahesh G.; Felser, Claudia; Parkin, Stuart S. P.

    2016-01-01

    Although high-tunnelling spin polarization has been observed in soft, ferromagnetic, and predicted for hard, ferrimagnetic Heusler materials, there has been no experimental observation to date of high-tunnelling magnetoresistance in the latter. Here we report the preparation of highly textured, polycrystalline Mn3Ge films on amorphous substrates, with very high magnetic anisotropy fields exceeding 7 T, making them technologically relevant. However, the small and negative tunnelling magnetoresistance that we find is attributed to predominant tunnelling from the lower moment Mn-Ge termination layers that are oppositely magnetized to the higher moment Mn-Mn layers. The net spin polarization of the current reflects the different proportions of the two distinct termination layers and their associated tunnelling matrix elements that result from inevitable atomic scale roughness. We show that by engineering the spin polarization of the two termination layers to be of the same sign, even though these layers are oppositely magnetized, high-tunnelling magnetoresistance is possible.

  20. Simulations of electromagnetic effects in high frequency capacitively coupled discharges using the Darwin approximation

    CERN Document Server

    Eremin, Denis; Brinkmann, Ralf Peter; Mussenbrock, Thomas

    2012-01-01

    The Darwin approximation is investigated for its possible use in simulation of electromagnetic effects in large size, high frequency capacitively coupled discharges. The approximation is utilized within the framework of two different fluid models which are applied to typical cases showing pronounced standing wave and skin effects. With the first model it is demonstrated that Darwin approximation is valid for treatment of such effects in the range of parameters under consideration. The second approach, a reduced nonlinear Darwin approximation-based model, shows that the electromagnetic phenomena persist in a more realistic setting. The Darwin approximation offers a simple and efficient way of carrying out electromagnetic simulations as it removes the Courant condition plaguing explicit electromagnetic algorithms and can be implemented as a straightforward modification of electrostatic algorithms. The algorithm described here avoids iterative schemes needed for the divergence cleaning and represents a fast and ...

  1. A capacitive level shifter for high voltage (2.5kV)

    DEFF Research Database (Denmark)

    Andersen, Thomas; Andersen, Michael A. E.; Thomsen, Ole Cornelius;

    2012-01-01

    with focus on low power consumption as well as low capacitive load between the floating half-bridge node and ground (output capacitance). The operation of the level-shifter is tested and verified by measurements on a prototype half-bridge gate driver. Results conclude stabile operation at 2.44kV, 50k...

  2. High Specific Capacitance of Polyaniline/Mesoporous Manganese Dioxide Composite Using KI-H2SO4 Electrolyte

    Directory of Open Access Journals (Sweden)

    Zhongkai Hu

    2015-09-01

    Full Text Available The PANI/Mesoporous MnO2 composites were prepared through a simple one step method and we introduced the KI-H2SO4 solution as the electrolyte of PANI/MnO2 composites creatively. The characterization of structure, morphology, and composition are obtained by X-ray diffraction, Fourier transform infrared spectroscopy, thermal gravity analysis, Raman spectra, and scanning electron microscope. The electrochemical performances were investigated by constant-current charge–discharge, the voltammetry curve, and alternating current (AC impedance technique. The specific capacitance of composites is 1405 F/g, which is almost 10 times larger than MnO2 (158 F/g. We also find that the iodide concentration is closely related to the specific capacitance. Therefore, we explored the specific capacitance at different iodide concentration (0.05, 0.1, 0.2, 0.5, and 1 M, the results indicated that the specific capacitance reached a maximum value (1580 F/g at 0.5 mol/L. Additionally, the PANI/Mesoporous MnO2 composites not only exhibited a good ratio discharge property (857 F/g at high current density, but also revealed an excellent cycling stability after 500 cycles, which retained 90% of the original specific capacitance.

  3. Negative Capacitance Tunnel Field Effect Transistor: A Novel Device with Low Subthreshold Swing and High ON Current

    CERN Document Server

    Chowdhury, Nadim; Khosru, Quazi D M

    2014-01-01

    In this paper we propose a modified structure of TFET incorporating ferroelectric oxide as the complementary gate dielectric operating in negative capacitance zone, called the Negative Capacitance Tunnel FET (NCTFET). The proposed device effectively combines two different mechanisms of lowering the sub threshold swing (SS) for a transistor garnering a further lowered one compared to conventional TFET. A simple yet accurate analytical tunnel current model for the proposed device is also presented here. The developed analytical model demonstrates high ON current at low $V_{GS}$ and exhibits lower SS.

  4. Characterising thermal resistances and capacitances of GaN high-electron-mobility transistors through dynamic electrothermal measurements

    DEFF Research Database (Denmark)

    Wei, Wei; Mikkelsen, Jan H.; Jensen, Ole Kiel

    2014-01-01

    This study presents a method to characterise thermal resistances and capacitances of GaN high-electron-mobility transistors (HEMTs) through dynamic electrothermal measurements. A measured relation between RF gain and the channel temperature (Tc) is formed and used for indirect measurements...

  5. Metal nanoparticle-directed NiCo2O4 nanostructure growth on carbon nanofibers with high capacitance.

    Science.gov (United States)

    Chen, Long; Zhu, Jiahua

    2014-08-04

    Metal nanoparticles (Ni, Co) decorated on an electrospun carbon nanofiber surface directed the growth of NiCo2O4 into nanorod and nanosheet morphologies. These metal nanoparticles served as a transition layer to strengthen the interface and promote charge transfer between carbon and NiCo2O4 to achieve a high capacitance of 781 F g(-1).

  6. Capacitive sensor for continuous monitoring of high-volume droplet microfluidic generation

    KAUST Repository

    Conchouso Gonzalez, David

    2016-12-19

    This paper presents a capacitive sensor for monitoring parallel microfluidic droplet generation. The great electric permittivity difference between common droplet microfluidic fluids such as air, oil and water (ϵoil ≈ 2–3 and ϵwater ≈ 80.4), allows for accurate detection of water in oil concentration changes. Capacitance variations as large as 10 pF between a channel filled with water or dodecane, are used to continuously monitor the output of a parallelization system producing 150 µl/min of water in dodecane emulsions. We also discuss a low cost fabrication process to manufacture these capacitive sensors, which can be integrated to different substrates.

  7. Electric-field assisted switching of magnetization in perpendicularly magnetized (Ga,Mn)As films at high temperatures

    Science.gov (United States)

    Wang, Hailong; Ma, Jialin; Yu, Xueze; Yu, Zhifeng; Zhao, Jianhua

    2017-01-01

    The electric-field effects on the magnetism in perpendicularly magnetized (Ga,Mn)As films at high temperatures have been investigated. An electric-field as high as 0.6 V nm-1 is applied by utilizing a solid-state dielectric Al2O3 film as a gate insulator. The coercive field, saturation magnetization and magnetic anisotropy have been clearly changed by the gate electric-field, which are detected via the anomalous Hall effect. In terms of the Curie temperature, a variation of about 3 K is observed as determined by the temperature derivative of the sheet resistance. In addition, electrical switching of the magnetization assisted by a fixed external magnetic field at 120 K is demonstrated, employing the gate-controlled coercive field. The above experimental results have been attributed to the gate voltage modulation of the hole density in (Ga,Mn)As films, since the ferromagnetism in (Ga,Mn)As is carrier-mediated. The limited modulation magnitude of magnetism is found to result from the strong charge screening effect introduced by the high hole concentration up to 1.10  ×  1021 cm-3, while the variation of the hole density is only about 1.16  ×  1020 cm-3.

  8. Preparing two-dimensional microporous carbon from Pistachio nutshell with high areal capacitance as supercapacitor materials

    Science.gov (United States)

    Xu, Jiandong; Gao, Qiuming; Zhang, Yunlu; Tan, Yanli; Tian, Weiqian; Zhu, Lihua; Jiang, Lei

    2014-07-01

    Two-dimensional (2D) porous carbon AC-SPN-3 possessing of amazing high micropore volume ratio of 83% and large surface area of about 1069 m2 g-1 is high-yield obtained by pyrolysis of natural waste Pistachio nutshells with KOH activation. The AC-SPN-3 has a curved 2D lamellar morphology with the thickness of each slice about 200 nm. The porous carbon is consists of highly interconnected uniform pores with the median pore diameter of about 0.76 nm, which could potentially improve the performance by maximizing the electrode surface area accessible to the typical electrolyte ions (such as TEA+, diameter = ~0.68 nm). Electrochemical analyses show that AC-SPN-3 has significantly large areal capacitance of 29.3/20.1 μF cm-2 and high energy density of 10/39 Wh kg-1 at power of 52/286 kW kg-1 in 6 M KOH aqueous electrolyte and 1 M TEABF4 in EC-DEC (1:1) organic electrolyte system, respectively.

  9. Rescaling of metal oxide nanocrystals for energy storage having high capacitance and energy density with robust cycle life.

    Science.gov (United States)

    Jeong, Hyung Mo; Choi, Kyung Min; Cheng, Tao; Lee, Dong Ki; Zhou, Renjia; Ock, Il Woo; Milliron, Delia J; Goddard, William A; Kang, Jeung Ku

    2015-06-30

    Nanocrystals are promising structures, but they are too large for achieving maximum energy storage performance. We show that rescaling 3-nm particles through lithiation followed by delithiation leads to high-performance energy storage by realizing high capacitance close to the theoretical capacitance available via ion-to-atom redox reactions. Reactive force-field (ReaxFF) molecular dynamics simulations support the conclusion that Li atoms react with nickel oxide nanocrystals (NiO-n) to form lithiated core-shell structures (Ni:Li2O), whereas subsequent delithiation causes Ni:Li2O to form atomic clusters of NiO-a. This is consistent with in situ X-ray photoelectron and optical spectroscopy results showing that Ni(2+) of the nanocrystal changes during lithiation-delithiation through Ni(0) and back to Ni(2+). These processes are also demonstrated to provide a generic route to rescale another metal oxide. Furthermore, assembling NiO-a into the positive electrode of an asymmetric device enables extraction of full capacitance for a counter negative electrode, giving high energy density in addition to robust capacitance retention over 100,000 cycles.

  10. Structure and magnetic properties of tetragonal Heusler D022-Mn3Ge compound epitaxial films with high perpendicular magnetic anisotropy

    Science.gov (United States)

    Sugihara, A.; Suzuki, K.; Mizukami, S.; Miyazaki, T.

    2015-04-01

    We investigated the structure and magnetic properties of epitaxial films of D022-Mn3Ge tetragonal Heusler like compounds in detail. Epitaxial films with a stoichiometric composition were grown on Cr-buffered single crystalline (0 0 1) MgO substrates using ultra-high vacuum sputtering at different growth temperatures. X-ray diffraction showed that D022-ordered films were formed at growth temperatures of ⩾200 °C. Epitaxial growth was indicated by cross-sectional high-resolution transmission electron microscopy. Nanobeam diffraction patterns from the D022-Mn3Ge film grown at 400 °C suggests the absence of planar defects such as stacking faults and twins in the film. Out-of-plane magnetic hysteresis curves with perfect squareness were observed for the films grown at ⩾300 °C. These films also showed abrupt magnetization reversal at a coercivity of about 1 T, which is higher than that of other thin film materials with perpendicular magnetic anisotropy such as CoPt and FePt. A huge domain diameter in the D022-Mn3Ge films was indicated by the initial magnetization curves that were measured by the polar magneto-optical Kerr effect.

  11. Perpendicular Magnetic Anisotropy and High Spin Polarization in Tetragonal Fe4N /BiFeO3 Heterostructures

    Science.gov (United States)

    Yin, Li; Mi, Wenbo; Wang, Xiaocha

    2016-12-01

    The tetragonal Fe4N /BiFeO3(001 ) heterostructures aimed at simultaneously gaining the perpendicular magnetic anisotropy (PMA) and high spin polarization have been investigated by the first-principles method. It is found that Fe4N with FeAFeB termination is better for achieving interfacial and inner PMA simultaneously than (FeB)2N termination. When the positions of interfacial FeA and FeB relative to Fe in BiFeO3 are changed, the PMA in Fe4N transforms into the in-plane magnetic anisotropy. Especially, PMA in Fe4N near the heterointerfaces depends on the direction of ferroelectric polarization in BiFeO3 . Finally, the interfacial and inner PMA of Fe4N along with high spin polarization appear in the stable FeAFeB/Fe -O2 case owing to the 3 d -3 d orbital hybridization. These results provide the opportunities for developing multifunctional spintronic devices.

  12. A versatile method to grow localized arrays of nanowires for highly sensitive capacitive devices

    DEFF Research Database (Denmark)

    Antohe, V.A.; Radu, A.; Yunus, S.

    2008-01-01

    We propose a new approach to increase the detection efficiency of the capacitive sensing devices, by growing vertically aligned nanowires arrays, localized and confined on small interdigited electrodes structures. The metallic tracks are made using optical lithography, and the nanowires are reali......We propose a new approach to increase the detection efficiency of the capacitive sensing devices, by growing vertically aligned nanowires arrays, localized and confined on small interdigited electrodes structures. The metallic tracks are made using optical lithography, and the nanowires...

  13. An InP-Based Dual-Depletion-Region Electroabsorption Modulator with Low Capacitance and Predicted High Bandwidth

    Institute of Scientific and Technical Information of China (English)

    SHAO Yong-Bo; ZHAO Ling-Juan; YU Hong-Yan; QIU Ji-Fang; QIU Ying-Ping; PAN Jiao-Qing; WANG Bao-Jun; ZHU Hong-Liang; WANG Wei

    2011-01-01

    A novel dual-depletion-region electroabsorption modulator (DDR-EAM) based on InP at 1550nm is fabricated.The measured capacitance and extinction ratio of the DDR-EAM reveal that the dual depletion region structure can reduce the device capacitance significantly without any degradation of extinction ratio.Moreover,the bandwidth of the DDR-EAM predicted by using an equivalent circuit model is larger than twice the bandwidth of the conventional lumped-electrode EAM (L-EAM).The electroabsorption modulator (EAM) is highly desirable as an external electro-optical modulator due to its high speed,low cost and capability of integration with other optical component such as DFB lasers,DBR lasers or semiconductor optical amplifiers.[1-4]So far,EAMs are typically fabricated by using lumped electrodes[1-4] and travelling-wave electrodes.[5-15]%A novel dual-depletion-region electroabsorption modulator (DDR-EAM) based on InP at 1550nm is fabricated. The measured capacitance and extinction ratio of the DDR-EAM reveal that the dual depletion region structure can reduce the device capacitance significantly without any degradation of extinction ratio. Moreover, the bandwidth of the DDR-EAM predicted by using an equivalent circuit model is larger than twice the bandwidth of the conventional lumped-electrode EAM (L-EAM).

  14. Perpendicular spin transfer torque magnetic random access memories with high spin torque efficiency and thermal stability for embedded applications (invited)

    Energy Technology Data Exchange (ETDEWEB)

    Thomas, Luc, E-mail: luc.thomas@headway.com; Jan, Guenole; Zhu, Jian; Liu, Huanlong; Lee, Yuan-Jen; Le, Son; Tong, Ru-Ying; Pi, Keyu; Wang, Yu-Jen; Shen, Dongna; He, Renren; Haq, Jesmin; Teng, Jeffrey; Lam, Vinh; Huang, Kenlin; Zhong, Tom; Torng, Terry; Wang, Po-Kang [TDK-Headway Technologies, Inc., Milpitas, California 95035 (United States)

    2014-05-07

    Magnetic random access memories based on the spin transfer torque phenomenon (STT-MRAMs) have become one of the leading candidates for next generation memory applications. Among the many attractive features of this technology are its potential for high speed and endurance, read signal margin, low power consumption, scalability, and non-volatility. In this paper, we discuss our recent results on perpendicular STT-MRAM stack designs that show STT efficiency higher than 5 k{sub B}T/μA, energy barriers higher than 100 k{sub B}T at room temperature for sub-40 nm diameter devices, and tunnel magnetoresistance higher than 150%. We use both single device data and results from 8 Mb array to demonstrate data retention sufficient for automotive applications. Moreover, we also demonstrate for the first time thermal stability up to 400 °C exceeding the requirement of Si CMOS back-end processing, thus opening the realm of non-volatile embedded memory to STT-MRAM technology.

  15. High-k Dielectrics for Application in Broadband Radio Frequency-Microelectromechanical System Capacitive Shunt Switch

    Science.gov (United States)

    Zhang, Yi; Lu, Jian; Ichiki, Masaaki; Onodera, Kazumasa; Maeda, Ryutaro

    130 nm-thick lead zirconate titanate(PZT)/45 nm-thick HfO2 stack and single 45 nm-thick HfO2 dielectric film were utilized as insulator layer in π-type radio frequency (RF) capacitive shunt switches for achieving high isolation performance in broadband application. Thin PZT film in perovskite structure mainly with (1 1 1) orientation was successfully prepared at low temperature (500°C) using sol-gel method. The thin PZT film exhibited excellent ferroelectric properties and high dielectric constant (k ≈ 1185). Thin HfO2 film was prepared by sputtering method in a gas mixture of O2 and Ar. The thin HfO2 film had the dielectric constant of about 17 and the dielectric strength of about 24 MV/cm. The switch of PZT/HfO2 stack dielectric showed isolation performance better than -20 dB in the frequency range of 1 ∼ 35 GHz. The switch of HfO2 had isolation performance better than -40 dB in the frequency of 5 ∼ 35 GHz, suggesting its attractive prospective in practical broadband application.

  16. High capacitive performance of hollow activated carbon fibers derived from willow catkins

    Science.gov (United States)

    Wang, Kai; Song, Yan; Yan, Rui; Zhao, Ning; Tian, Xiaodong; Li, Xiao; Guo, Quangui; Liu, Zhanjun

    2017-02-01

    In this paper, we prepared three different kinds of hollow activated carbon fibers (HACFs) from willow catkins (WCs), phenolic- and pitch-based hollow fibers, respectively. The morphology, pore structure, surface chemical composition and electrochemical properties of these hollow fibers were studied in parallel. Due to its high-hollow, cost-effective as well as eco-friendly nature, HACFs derived from WCs can be served as excellent electrode materials for electrochemical energy storage devices. Electrochemical measurements illustrate that the WCs derived HACFs exhibit not only high specific capacitance of 333 F g-1 at 0.1 A g-1 but also considerable rate capability with a retention of 62.7% (209 F g-1 at 10 A g-1). Symmetric supercapacitor devices that using WCs derived HACFs as electrodes deliver a maximum energy density of ∼8.8 Wh kg-1 at power density of 50 W kg-1 and good cycling performance with 95.5% retention over 3000 cycles at 5 A g-1 in 6 M KOH aqueous electrolytes.

  17. Experimental study of a very high frequency, 162 MHz, segmented electrode, capacitively coupled plasma discharge

    Science.gov (United States)

    Sirse, Nishant; Harvey, Cleo; Gaman, Cezar; Ellingboe, Bert

    2016-09-01

    Radio-frequency capacitively coupled plasma (CCP) discharge operating at a very high frequency, 30-300 MHz, offers many advantages over standard 13.56 MHz CCP. However, there is a limited flexibility on the choice of driving frequency and substrate size due to plasma non-uniformity caused by the standing wave effect and edge effect. To overcome this issue segmented electrode CCP's are proposed and researched. Despite its numerous advantages the power coupling mechanism and plasma chemistry in this type of discharge are not fully understood due to lack of experimental data. In this paper, we present the experimental study of a segmented electrode, 3x4 tile array (10x10 cm square tile with 1 cm tile-to-tile separation), CCP discharge driven at 162 MHz. We measured plasma uniformity and gas temperature using hairpin probe and optical emission spectroscopy respectively. A homemade RF compensated Langmuir probe is employed to measure the Electron Energy Distribution Function (EEDF) by second harmonic technique. Energy resolved quadrupole mass spectrometer is utilized to measure the ion energy distribution. Discharge/plasma properties are investigated for several operating conditions and for power coupling mode in both washer board and checker board configuration. The experimental results show that the uniform plasma density can be maintained over a large area along with highly non-equilibrium condition to produce unique gas phase plasma chemistry.

  18. Starch Derived Porous Carbon Nanosheets for High-Performance Photovoltaic Capacitive Deionization.

    Science.gov (United States)

    Wu, Tingting; Wang, Gang; Dong, Qiang; Zhan, Fei; Zhang, Xu; Li, Shaofeng; Qiao, Huiying; Qiu, Jieshan

    2017-08-15

    Capacitive deionization (CDI) is an emerging technology that uniquely integrates energy storage and desalination. In this work, porous carbon nanosheets (PCNSs) with an ultrahigh specific surface area of 2853 m(2)/g were fabricated by the simple carbonization of starch followed by KOH activation for the electrode material of photovoltaic CDI. The CDI cell consisting of PCNSs electrodes exhibited a high salt adsorption capacity (SAC) of 15.6 mg/g at ∼1.1 V in 500 mg/L NaCl as well as high charge efficiency and low energy consumption. KOH activation played a key role in the excellent CDI performance as it not only created abundant pores on the surface of PCNSs but also made it fluffy and improved its graphitization degree, which are beneficial to the transport of ions and electrons. PCNSs are supposed to be a promising candidate for CDI electrode materials. The combination of solar cells and CDI may provide a new approach to reduce the energy cost of CDI and boost its commercial competitiveness.

  19. High capacity and high rate capability of nitrogen-doped porous hollow carbon spheres for capacitive deionization

    Energy Technology Data Exchange (ETDEWEB)

    Zhao, Shanshan; Yan, Tingting; Wang, Hui; Chen, Guorong; Huang, Lei; Zhang, Jianping; Shi, Liyi; Zhang, Dengsong, E-mail: dszhang@shu.edu.cn

    2016-04-30

    Graphical abstract: - Highlights: • The nitrogen-doped porous hollow carbon spheres were prepared. • The obtained materials have a good capacitive deionization performance. • The electrodes show high salt adsorption rate and good regeneration performance. - Abstract: In this work, nitrogen-doped porous hollow carbon spheres (N-PHCS) were well prepared by using polystyrene (PS) spheres as hard templates and dopamine hydrochloride as carbon and nitrogen sources. Field emission scanning electron microscopy (SEM) and transmission electron microscopy (TEM) images demonstrate that the N-PHCS have a uniform, spherical and hollow structure. Nitrogen adsorption–desorption analysis shows that the N-PHCS have a high specific area of 512 m{sup 2}/g. X-ray photoelectron spectroscopy result reveals that the nitrogen doping amount is 2.92%. The hollow and porous structure and effective nitrogen doping can contribute to large accessible surface area, efficient ion transport and good conductivity. In the electrochemical tests, we can conclude that the N-PHCS have a high specific capacitance value, a good stability and low inner resistance. The N-PHCS electrodes present a high salt adsorption capacity of 12.95 mg/g at a cell voltage of 1.4 V with a flow rate of 40 mL/min in a 500 mg/L NaCl aqueous solution. Moreover, the N-PHCS electrodes show high salt adsorption rate and good regeneration performance in the CDI process. With high surface specific area and effective nitrogen doping, the N-PHCS is promising to the CDI and other electrochemical applications.

  20. Fabrication and Characteristics of High Capacitance Al Thin Films Capacitor Using a Polymer Inhibitor Bath in Electroless Plating Process.

    Science.gov (United States)

    Cho, Young-Lae; Lee, Jung-Woo; Lee, Chang-Hyoung; Choi, Hyung-Seon; Kim, Sung-Su; Song, Young Il; Park, Chan; Suh, Su-Jeong

    2015-10-01

    An aluminum (Al) thin film capacitor was fabricated for a high capacitance capacitor using electrochemical etching, barrier-type anodizing, and electroless Ni-P plating. In this study, we focused on the bottom-up filling of Ni-P electrodes on Al2O3/Al with etched tunnels. The Al tunnel pits were irregularly distributed on the Al foil, diameters were in the range of about 0.5~1 μm, the depth of the tunnel pits was approximately 35~40 μm, and the complex structure was made full filled hard metal. To control the plating rate, the experiment was performed by adding polyethyleneimine (PEI, C2H5N), a high molecular substance. PEI forms a cross-link at the etching tunnel inlet, playing the role of delaying the inlet plating. When the PEI solution bath was used after activation, the Ni-P layer was deposited selectively on the bottoms of the tunnels. The characteristics were analyzed by adding the PEI addition quantity rate of 100~600 mg/L into the DI water. The capacitance of the Ni-P/Al2O3 (650~700 nm)/Al film was measured at 1 kHz using an impedance/gain phase analyzer. For the plane film without etch tunnels the capacitance was 12.5 nF/cm2 and for the etch film with Ni-P bottom-up filling the capacitance was 92 nF/cm2. These results illustrate a remarkable maximization of capacitance for thin film metal capacitors.

  1. Ultra-small vanadium nitride quantum dots embedded in porous carbon as high performance electrode materials for capacitive energy storage

    Science.gov (United States)

    Yang, Yunlong; Zhao, Lei; Shen, Kuiwen; Liu, Ying; Zhao, Xiaoning; Wu, Yage; Wang, Yanqin; Ran, Fen

    2016-11-01

    Ultra-small vanadium nitride quantum dots embedded in porous carbon (VNQDs/PC) were fabricated by a thermal treatment process of NH4VO3/C3H6N6 under nitrogen atmosphere. The specific capacitance of VNQDs/PC was 1008 mF cm-2 at a current density of 0.004 A cm-2, whereas the VN/carbon hybrid material obtained by a solid-state blending of NH4VO3 and C3H6N6 just exhibited a capacitance of 432 mF cm-2 at the same current density. By mediating the ratio of NH4VO3 and C3H6N6, a maximum specific capacitance of 1124 mF cm-2 was achieved at a current density of 0.002 A cm-2 in aqueous 6 mol/L KOH electrolyte with the potential range from 0 to -1.15 V when it reached 1: 7 (wt./wt.). Additionally, symmetrical supercapacitor fabricated with synthesized VNQDs/PC presented a high specific capacitance of 215 mF cm-2 at 0.002 A cm-2 based on the entire cell, and exhibited a high capacitance retention of 86.6% with current density increased to 5 A g-1. The VNQDs/PC negative electrodes were combined with Ni(OH)2 positive electrodes for the fabrication of hybrid supercapacitors. Remarkably, at a power density of 828.7 W kg-1, the device delivered an ultrahigh energy density of 47.2 Wh kg-1.

  2. Arsenic-Doped High-Resistivity-Silicon Epitaxial Layers for Integrating Low-Capacitance Diodes

    Directory of Open Access Journals (Sweden)

    Jaber Derakhshandeh

    2011-12-01

    Full Text Available An arsenic doping technique for depositing up to 40-μm-thick high-resistivity layers is presented for fabricating diodes with low RC constants that can be integrated in closely-packed configurations. The doping of the as-grown epi-layers is controlled down to 5 × 1011 cm−3, a value that is solely limited by the cleanness of the epitaxial reactor chamber. To ensure such a low doping concentration, first an As-doped Si seed layer is grown with a concentration of 1016 to 1017 cm−3, after which the dopant gas arsine is turned off and a thick lightly-doped epi-layer is deposited. The final doping in the thick epi-layer relies on the segregation and incorporation of As from the seed layer, and it also depends on the final thickness of the layer, and the exact growth cycles. The obtained epi-layers exhibit a low density of stacking faults, an over-the-wafer doping uniformity of 3.6%, and a lifetime of generated carriers of more than 2.5 ms. Furthermore, the implementation of a segmented photodiode electron detector is demonstrated, featuring a 30 pF capacitance and a 90 Ω series resistance for a 7.6 mm2 anode area.

  3. Flexible supercapacitors with high areal capacitance based on hierarchical carbon tubular nanostructures

    Science.gov (United States)

    Zhang, Haitao; Su, Hai; Zhang, Lei; Zhang, Binbin; Chun, Fengjun; Chu, Xiang; He, Weidong; Yang, Weiqing

    2016-11-01

    Hierarchical structure design can greatly enhance the unique properties of primary material(s) but suffers from complicated preparation process and difficult self-assembly of materials with different dimensionalities. Here we report on the growth of single carbon tubular nanostructures with hierarchical structure (hCTNs) through a simple method based on direct conversion of carbon dioxide. Resorting to in-situ transformation and self-assembly of carbon micro/nano-structures, the obtained hCTNs are blood-like multichannel hierarchy composed of one large channel across the hCTNs and plenty of small branches connected to each other. Due to the unique pore structure and high surface area, these hCTN-based flexible supercapacitors possess the highest areal capacitance of ∼320 mF cm-2, as well as good rate-capability and excellent cycling stability (95% retention after 2500 cycles). It was established that this method can control the morphology, size, and density of hCTNs and effectively construct hCTNs well anchored to the various substrates. Our work unambiguously demonstrated the potential of hCTNs for large flexible supercapacitors and integrated energy management electronics.

  4. Functionalization of Defect Sites in Graphene with RuO2 for High Capacitive Performance.

    Science.gov (United States)

    Yang, Fan; Zhang, Lianbing; Zuzuarregui, Ana; Gregorczyk, Keith; Li, Le; Beltrán, Mikel; Tollan, Christopher; Brede, Jens; Rogero, Celia; Chuvilin, Andrey; Knez, Mato

    2015-09-23

    Graphene is an attractive material for its physicochemical properties, but for many applications only chemically synthesized forms such as graphene oxide (GO) and reduced graphene oxide (rGO) can be produced in sufficient amounts. If considered as electrode material, the intrinsic defects of GO or rGO may have negative influence on the conductivity and electrochemical properties. Such defects are commonly oxidized sites that offer the possibility to be functionalized with other materials in order to improve performance. In this work, we demonstrate how such ultimately efficient functionalization can be achieved: namely, through controlled binding of very small amount of materials such as RuO2 to rGO by atomic layer deposition (ALD), in this way substituting the native defect sites with RuO2 defects. For the example of a supercapacitor, we show that defect functionalization results in significantly enhanced specific capacitance of the electrode and that its energy density can be stabilized even at high consumption rates.

  5. Synthesis of highly monodisperse Ge crystals in a capacitively coupled flow through reactor for photovoltaic applications

    Science.gov (United States)

    Gresback, Ryan; Kortshagen, Uwe

    2006-10-01

    Germanium nanocrystals are interesting candidates for quantum dot-based solar cells. While the band gap of bulk Ge is ˜0.7 eV, the energy gap can be increased due to quantum confinement to ˜ 2eV for Ge particles of ˜3 nm in size. With a single material, Ge nanocrystals of sizes from 3 -15 nm would thus allow to span the entire range of band gaps that is of interest for photovoltaic devices. Moreover, compared to many other quantum dot materials that are currently studied for photovoltaic applications, Ge is perceived as non-toxic and environmentally benign. Ge nanocrystals are synthesized in a tubular, capacitively coupled flow through reactor. Germanium tetrachloride is used as a precursor. It is introduced into the plasma by a flow of argon and hydrogen. At typical pressures of 2 Torr and 40 W of RF power at 13.56 MHz, Ge crystals are generated and reside in the plasma for several tens of milliseconds. The size of the nanocrystals can be controlled in a range from 3-20 nm through the residence time. Particles are highly monodisperse. Organically passivated Ge nanocrystals self-assemble into monolayers when cast from colloidal solutions.

  6. Deformation of Cases in High Capacitance Value Wet Tantalum Capacitors under Environmental Stresses

    Science.gov (United States)

    Teverovsky, Alexander

    2016-01-01

    Internal gas pressure in hermetic wet tantalum capacitors is created by air, electrolyte vapor, and gas generated by electrochemical reactions at the electrodes. This pressure increases substantially with temperature and time of operation due to excessive leakage currents. Deformation of the case occurs when the internal pressure exceeds pressure of the environments and can raise significantly when a part operates in space. Contrary to the cylinder case wet tantalum capacitors that have external sealing by welding and internal sealing provided by the Teflon bushing and crimping of the case, no reliable internal sealing exists in the button case capacitors. Single seal design capacitors are used for high capacitance value wet tantalum capacitors manufactured per DLA L&M drawings #04003, 04005, and 10011, and require additional analysis to assure their reliable application in space systems. In this work, leakage currents and case deformation of button case capacitors were measured during different environmental test conditions. Recommendations for derating, screening and qualification testing are given. This work is a continuation of a series of NEPP reports related to quality and reliability of wet tantalum capacitors.

  7. High capacitance organic field-effect transistors with modified gate insulator surface

    Science.gov (United States)

    Majewski, L. A.; Schroeder, R.; Grell, M.; Glarvey, P. A.; Turner, M. L.

    2004-11-01

    In this paper, we report on flexible, high capacitance, pentacene, and regioregular poly(3-hexylthiophene) (rr-P3HT) organic field-effect transistors fabricated on metallized Mylar films. The gate insulator, Al2O3, was prepared by means of anodization. We show that covering the anodized gate insulator with an octadecyltrichlorosilane self-assembled monolayer or apoly(α-methylstyrene) capping layer has the same effect on carrier mobility as for thermally grown silicon oxide. In addition, temperature-dependent measurements of mobility were performed on transistors fabricated with and without modification of the gate dielectric. In the case of both the pentacene and the rr-P3HT transistors, the μ(T ) behavior shows that the cause of the mobility enhancement through surface modification is not a reduction in the level of energetic disorder (σ in Bässler's model), as in the case of the fully amorphous organic semiconductor poly(triarylamine) [Veres et al., Adv. Funct. Mater. 13, 199 (2003)]. It appears that the surface modification improves mobility by changing the morphology of the semiconducting films.

  8. High-mobility capacitively-induced two-dimensional electrons in a lateral superlattice potential

    Science.gov (United States)

    Lu, T. M.; Laroche, D.; Huang, S.-H.; Chuang, Y.; Li, J.-Y.; Liu, C. W.

    2016-01-01

    In the presence of a lateral periodic potential modulation, two-dimensional electrons may exhibit interesting phenomena, such as a graphene-like energy-momentum dispersion, Bloch oscillations, or the Hofstadter butterfly band structure. To create a sufficiently strong potential modulation using conventional semiconductor heterostructures, aggressive device processing is often required, unfortunately resulting in strong disorder that masks the sought-after effects. Here, we report a novel fabrication process flow for imposing a strong lateral potential modulation onto a capacitively induced two-dimensional electron system, while preserving the host material quality. Using this process flow, the electron density in a patterned Si/SiGe heterostructure can be tuned over a wide range, from 4.4 × 1010 cm−2 to 1.8 × 1011 cm−2, with a peak mobility of 6.4 × 105 cm2/V·s. The wide density tunability and high electron mobility allow us to observe sequential emergence of commensurability oscillations as the density, the mobility, and in turn the mean free path, increase. Magnetic-field-periodic quantum oscillations associated with various closed orbits also emerge sequentially with increasing density. We show that, from the density dependence of the quantum oscillations, one can directly extract the steepness of the imposed superlattice potential. This result is then compared to a conventional lateral superlattice model potential. PMID:26865160

  9. Transition metal sulfides grown on graphene fibers for wearable asymmetric supercapacitors with high volumetric capacitance and high energy density

    Science.gov (United States)

    Cai, Weihua; Lai, Ting; Lai, Jianwei; Xie, Haoting; Ouyang, Liuzhang; Ye, Jianshan; Yu, Chengzhong

    2016-06-01

    Fiber shaped supercapacitors are promising candidates for wearable electronics because they are flexible and light-weight. However, a critical challenge of the widespread application of these energy storage devices is their low cell voltages and low energy densities, resulting in limited run-time of the electronics. Here, we demonstrate a 1.5 V high cell voltage and high volumetric energy density asymmetric fiber supercapacitor in aqueous electrolyte. The lightweight (0.24 g cm‑3), highly conductive (39 S cm‑1), and mechanically robust (221 MPa) graphene fibers were firstly fabricated and then coated by NiCo2S4 nanoparticles (GF/NiCo2S4) via the solvothermal deposition method. The GF/NiCo2S4 display high volumetric capacitance up to 388 F cm‑3 at 2 mV s‑1 in a three-electrode cell and 300 F cm‑3 at 175.7 mA cm‑3 (568 mF cm‑2 at 0.5 mA cm‑2) in a two-electrode cell. The electrochemical characterizations show 1000% higher capacitance of the GF/NiCo2S4 as compared to that of neat graphene fibers. The fabricated device achieves high energy density up to 12.3 mWh cm‑3 with a maximum power density of 1600 mW cm‑3, outperforming the thin-film lithium battery. Therefore, these supercapacitors are promising for the next generation flexible and wearable electronic devices.

  10. Transition metal sulfides grown on graphene fibers for wearable asymmetric supercapacitors with high volumetric capacitance and high energy density.

    Science.gov (United States)

    Cai, Weihua; Lai, Ting; Lai, Jianwei; Xie, Haoting; Ouyang, Liuzhang; Ye, Jianshan; Yu, Chengzhong

    2016-06-01

    Fiber shaped supercapacitors are promising candidates for wearable electronics because they are flexible and light-weight. However, a critical challenge of the widespread application of these energy storage devices is their low cell voltages and low energy densities, resulting in limited run-time of the electronics. Here, we demonstrate a 1.5 V high cell voltage and high volumetric energy density asymmetric fiber supercapacitor in aqueous electrolyte. The lightweight (0.24 g cm(-3)), highly conductive (39 S cm(-1)), and mechanically robust (221 MPa) graphene fibers were firstly fabricated and then coated by NiCo2S4 nanoparticles (GF/NiCo2S4) via the solvothermal deposition method. The GF/NiCo2S4 display high volumetric capacitance up to 388 F cm(-3) at 2 mV s(-1) in a three-electrode cell and 300 F cm(-3) at 175.7 mA cm(-3) (568 mF cm(-2) at 0.5 mA cm(-2)) in a two-electrode cell. The electrochemical characterizations show 1000% higher capacitance of the GF/NiCo2S4 as compared to that of neat graphene fibers. The fabricated device achieves high energy density up to 12.3 mWh cm(-3) with a maximum power density of 1600 mW cm(-3), outperforming the thin-film lithium battery. Therefore, these supercapacitors are promising for the next generation flexible and wearable electronic devices.

  11. A High-Efficient Low-Cost Converter for Capacitive Wireless Power Transfer Systems

    Directory of Open Access Journals (Sweden)

    Il-Oun Lee

    2017-09-01

    Full Text Available Growth of the Internet of Things (IoT spurs need for new ways of delivering power. Wireless power transfer (WPT has come into the spotlight from both academia and industry as a promising way to power the IoT devices. As one of the well-known WPT techniques, the capacitive power transfer (CPT has the merit of low electromagnetic radiation and amenability of combined power and data transfer over a capacitive interface. However, applying the CPT to the IoT devices is still challenging in reality. One of the major issues is due to the small capacitance of the capacitive interface, which results in low efficiency of the power transfer. To tackle this problem, we present a new step-up single-switch quasi-resonant (SSQR converter for the CPT system. To enhance the CPT efficiency, the proposed converter is designed to operate at low frequency and drive small current into the capacitive interfaces. In addition, by eliminating resistor-capacitor-diode (RCD snubber in the converter, we reduce the implementation cost of the CPT system. Based on intensive experimental work with a CPT system prototype that supports maximum 50 W (100 V/0.5 A power transfer, we demonstrate the functional correctness of the converter that achieves up to 93% efficiency.

  12. Unusual dc electric fields induced by a high frequency alternating current in superconducting Nb films under a perpendicular magnetic field

    Science.gov (United States)

    Aliev, F. G.; Levanyuk, A. P.; Villar, R.; Sierra, J. F.; Pryadun, V. V.; Awad, A.; Moshchalkov, V. V.

    2009-06-01

    We report a systematic study of dc electric fields produced by sinusoidal high frequency ac currents in Nb superconducting films subject to a constant magnetic field perpendicular to the film plane. At frequencies in the 100 kHz to MHz range appears a new rectification effect which has not been previously observed at lower frequencies. We have observed the dc electric field generated in this regime in films without intentionally created anisotropic pinning centres, i.e. plain films, both in strip geometry as in cross-shape geometry, and also in films with symmetric periodic pinning centres. The electric field appears in both directions along and transverse to the alternating current and is essentially different at opposite film sides. It depends strongly on the intensity of the magnetic field and may exceed by nearly an order of magnitude the rectified electric fields recently reported at lower frequencies (few kHz) in systems with artificially induced anisotropic vortex pinning. The effect has a non-monotonic dependence on the drive current frequency, being maximum around a few 100 kHz to MHz, and shows a complicated temperature dependence. It is found to be different in long strips and cross shape samples. In the case of films with symmetric periodic pinning centres the rectified voltage shows a lower magnitude than in plain films, and shows an interesting structure when the applied magnetic field crosses the matching fields. We are only able to put forward tentative ideas to explain this phenomenon, which irrespective of its explanation should be taken into account in experimental studies of rectification effects in superconductors.

  13. Radical covalent organic frameworks: a general strategy to immobilize open-accessible polyradicals for high-performance capacitive energy storage.

    Science.gov (United States)

    Xu, Fei; Xu, Hong; Chen, Xiong; Wu, Dingcai; Wu, Yang; Liu, Hao; Gu, Cheng; Fu, Ruowen; Jiang, Donglin

    2015-06-01

    Ordered π-columns and open nanochannels found in covalent organic frameworks (COFs) could render them able to store electric energy. However, the synthetic difficulty in achieving redox-active skeletons has thus far restricted their potential for energy storage. A general strategy is presented for converting a conventional COF into an outstanding platform for energy storage through post-synthetic functionalization with organic radicals. The radical frameworks with openly accessible polyradicals immobilized on the pore walls undergo rapid and reversible redox reactions, leading to capacitive energy storage with high capacitance, high-rate kinetics, and robust cycle stability. The results suggest that channel-wall functional engineering with redox-active species will be a facile and versatile strategy to explore COFs for energy storage.

  14. Highly conductive, capacitive, flexible and soft electrodes based on a 3D graphene-nanotube-palladium hybrid and conducting polymer.

    Science.gov (United States)

    Kim, Hyun-Jun; Randriamahazaka, Hyacinthe; Oh, Il-Kwon

    2014-12-29

    Highly conductive, capacitive and flexible electrodes are fabricated by employing 3D graphene-nanotube-palladium nanostructures and a PEDOT:PSS conducting polymer. The fabricated flexible electrodes, without any additional metallic current collectors, exhibit increased charge mobility and good mechanical properties; they also allow greater access to the electrolyte ions and hence are suitable for flexible energy storage applications. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  15. Nonlinear Parasitic Capacitance Modelling of High Voltage Power MOSFETs in Partial SOI Process

    DEFF Research Database (Denmark)

    Fan, Lin; Knott, Arnold; Jørgensen, Ivan Harald Holger

    2016-01-01

    State-of-the-art power converter topologies such as resonant converters are either designed with or affected by the parasitic capacitances of the power switches. However, the power switches are conventionally characterized in terms of switching time and/or gate charge with little insight into the...

  16. Efficient modeling of interconnects and capacitive discontinuities in high-speed digital circuits. Thesis

    Science.gov (United States)

    Oh, K. S.; Schutt-Aine, J.

    1995-01-01

    Modeling of interconnects and associated discontinuities with the recent advances high-speed digital circuits has gained a considerable interest over the last decade although the theoretical bases for analyzing these structures were well-established as early as the 1960s. Ongoing research at the present time is focused on devising methods which can be applied to more general geometries than the ones considered in earlier days and, at the same time, improving the computational efficiency and accuracy of these methods. In this thesis, numerically efficient methods to compute the transmission line parameters of a multiconductor system and the equivalent capacitances of various strip discontinuities are presented based on the quasi-static approximation. The presented techniques are applicable to conductors embedded in an arbitrary number of dielectric layers with two possible locations of ground planes at the top and bottom of the dielectric layers. The cross-sections of conductors can be arbitrary as long as they can be described with polygons. An integral equation approach in conjunction with the collocation method is used in the presented methods. A closed-form Green's function is derived based on weighted real images thus avoiding nested infinite summations in the exact Green's function; therefore, this closed-form Green's function is numerically more efficient than the exact Green's function. All elements associated with the moment matrix are computed using the closed-form formulas. Various numerical examples are considered to verify the presented methods, and a comparison of the computed results with other published results showed good agreement.

  17. Thickness dependence of the magnetic properties of high-coercive Pr-Fe-B thin films with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Yang, F. [Shenyang National Laboratory for Materials Science, Institute of Metal Research and International Centre for Materials Physics, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang Liaoning 110016 (China); Liu, W. [Shenyang National Laboratory for Materials Science, Institute of Metal Research and International Centre for Materials Physics, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang Liaoning 110016 (China)], E-mail: wliu@imr.ac.cn; Cui, W.B.; Feng, J.N.; Zhang, Y.Q.; Zhang, Z.D [Shenyang National Laboratory for Materials Science, Institute of Metal Research and International Centre for Materials Physics, Chinese Academy of Sciences, 72 Wenhua Road, Shenyang Liaoning 110016 (China)

    2008-10-01

    The magnetic properties of Pr-Fe-B films with perpendicular magnetic anisotropy have been studied as a function of thickness varying from 10 to 1200 nm. The crucial thickness for forming the Pr{sub 2}Fe{sub 14}B phase is estimated to be about 25 nm in our study, and the perpendicular anisotropy shows a trend to vanish for thick films. The coercivity of the films initially increases with increasing film thickness, gradually reaching a value which is near the value for bulk material. The magnetic domain size increases with increasing thickness. The surface morphology, the roughness and the domain structure of the films have been investigated by means of atomic-force microscopy and magnetic-force microscopy.

  18. 3D flexible O/N Co-doped graphene foams for supercapacitor electrodes with high volumetric and areal capacitances

    Science.gov (United States)

    Qin, Tianfeng; Wan, Zunyuan; Wang, Zilei; Wen, Yuxiang; Liu, Mengting; Peng, Shanglong; He, Deyan; Hou, Juan; Huang, Fei; Cao, Guozhong

    2016-12-01

    3D flexible O/N co-doped graphene foams (GF) have been designed and fabricated successfully via combining the compression/hot curing strategy with chemical reduction and hydrothermal treatment, in which melamine foams were used not only as the source of N/O functional groups for the introduction of pseudocapacitance but also as the sacrificial template to inhibit the agglomeration of graphene. Also, the mechanism for method of the compressing/hot curing has been investigated systematically. And the resultant GF demonstrates excellent mechanical strength and flexibility. When the compacting GF is used as free-standing electrodes for supercapacitor, it exhibits more excellent ability of charge storage than that of pristine graphene foams. And 10 MPa-GF electrodes delivers high areal capacitance of 375 μF cm-2 at a current density of 1 A g-1, excellent rate capabilities and superior cycling stability of above 100%. According to the analysis of capacitance contribution for 10 MPa-GF electrode, the pseudocapacitance originated from N/O functional groups is up to ∼65% of the contribution of total capacitance. Moreover, the symmetric supercapacitor comprised of 10 MPa-GF electrodes presents a maximum energy density of 16 Wh kg-1 (8 Wh L-1) and a maximum power density of 17 kW kg-1 (8.6 kW L-1).

  19. Highly Sensitive Capacitive Gas Sensing at Ionic Liquid-Electrode Interfaces.

    Science.gov (United States)

    Wang, Zhe; Guo, Min; Mu, Xiaoyi; Sen, Soumyo; Insley, Thomas; Mason, Andrew J; Král, Petr; Zeng, Xiangqun

    2016-02-01

    We have developed an ultrasensitive gas-detection method based on the measurement of a differential capacitance of electrified ionic liquid (IL) electrode interfaces in the presence and absence of adsorbed gas molecules. The observed change of differential capacitance has a local maximum at a certain potential that is unique for each type of gas, and its amplitude is related to the concentration of the gas molecules. We establish and validate this gas-sensing method by characterizing SO2 detection at ppb levels with less than 1.8% signal from other interfering species (i.e., CO2, O2, NO2, NO, SO2, H2O, H2, and cyclohexane, tested at the same concentration as SO2). This study opens a new avenue of utilizing tunable electrified IL-electrode interfaces for selective sensing of molecules with a kinetic size resolution of 0.1 Å.

  20. A miniature high-power KrF laser excited with a capacitively coupled discharge

    NARCIS (Netherlands)

    Gerber, T.; Bastiaens, Hubertus M.J.; Peters, P.J.M.

    1985-01-01

    A KrF excimer laser excited in a capacitively coupled discharge device made out of commercial BaTiO3doorknob capacitors is described. The discharge volume of 1.4 cm3is formed by a 3 mm bore into four capacitors glued together in a line. A maximal laser output energy of 1.7 mJ (1.2 J/l) in a 5.0 ns

  1. High thermal stability and low Gilbert damping constant of CoFeB/MgO bilayer with perpendicular magnetic anisotropy by Al capping and rapid thermal annealing

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Ding-Shuo; Lai, Shu-Yu; Lin, Tzu-Ying; Wang, Liang-Wei; Liao, Jung-Wei; Lai, Chih-Huang, E-mail: chlai@mx.nthu.edu.tw [Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu, Taiwan (China); Chien, Cheng-Wei; Wang, Yung-Hung [Electronics and Optoelectronics Research Laboratories, Industrial Technology Research Institute, Chutung, Taiwan (China); Ellsworth, David; Lu, Lei; Wu, Mingzhong [Department of Physics, Colorado State University, Fort Collins, Colorado 80523 (United States)

    2014-04-07

    We demonstrate that the magnetic anisotropy of the CoFeB/MgO bilayer can be manipulated by adding an aluminum capping layer. After rapid thermal annealing, we can achieve large perpendicular magnetic anisotropy of CoFeB with a high thermal stability factor (Δ = 72) while the Gilbert damping constant can be reduced down to only 0.011 simultaneously. The boron and residual oxygen in the bulk CoFeB layer are properly absorbed by the Al capping layer during annealing, leading to the enhanced exchange stiffness and reduced damping. The interfacial Fe-O bonding can be optimized by tuning annealing temperature and thickness of Al, resulting in enhanced perpendicular anisotropy.

  2. Characterization of Highly Efficient CdTe Thin Film Solar Cells by the Capacitance-Voltage Profiling Technique

    Science.gov (United States)

    Okamoto, Tamotsu; Yamada, Akira; Konagai, Makoto

    2000-05-01

    The electrical properties of highly efficient CdTe thin film solar cells prepared by close-spaced sublimation (CSS) were investigated by capacitance-voltage (C-V) measurement. According to the dependence of the cell performance on the substrate temperature in the CSS process, the open-circuit voltage (Voc) increased with increasing the substrate temperature below 630°C@. The carrier concentration profiles revealed that the net acceptor concentration exponentially increased from the CdS/CdTe interface to the rear and that the acceptor concentration increased with increasing substrate temperature. This result suggests that Voc is improved as a result of the increase in the acceptor concentration.

  3. Nanoclay-based hierarchical interconnected mesoporous CNT/PPy electrode with improved specific capacitance for high performance supercapacitors.

    Science.gov (United States)

    Oraon, Ramesh; De Adhikari, Amrita; Tiwari, Santosh Kumar; Nayak, Ganesh Chandra

    2016-05-31

    A natural layered clay known as montmorillonite, a lamellar aluminosilicate with ∼1 nm thickness, has attracted intense attention in ongoing research due to its large natural abundance and environmental friendliness. Endowed with highly active surface sites the nanoclay has been extensively used in various fields viz. catalysis, biosensors etc. even though the role played by nanoclay on energy storage performance has not been elucidated. In this present work, a series of nanoclay (Closite 30B) based hierarchical open interconnected mesoporous electrode materials for supercapacitors (SCs) has been synthesized in the presence of carbon nanotubes (CNTs) and polypyrrole (PPy) by a facile in situ and ex situ approach. The role of nanoclay was explored as a dopant and its substantial doping effect exerted on the electrochemical performance towards energy storage was investigated. A coating of PPy over CNTs and nanoclay was confirmed from FESEM analysis which revealed the genesis of a nanoclay-supported hierarchical interconnected mesoporous framework. Furthermore, a PPy-coated CNT array in the presence of nanoclay was found to be highly porous with a high specific surface area without obvious deterioration. These interconnected structures can contribute to better penetration of electrolyte ions by shortening the path length for rapid transport of ions and electrons even at high rates. Cyclic voltammetry measurements revealed that nanoclay based in situ composite (CNP) and ex situ composite (CPN) exhibited a maximum specific capacitance of 425 F g(-1) and 317 F g(-1), respectively at a scan rate of 10 mV s(-1), which is comparatively higher than that of CP (i.e. PPy-coated CNTs) (76.77 F g(-1)). Similarly, a 273% increase in the specific capacitance of PPy was achieved after nanoclay incorporation in the nanocomposite NP (i.e. PPy-coated nanoclay) as compared to virgin PPy. These results are in good agreement with the specific capacitance performance by galvanostatic

  4. A novel capacitive micro-accelerometer with grid strip capacitances and sensing gap alterable capacitances

    Institute of Scientific and Technical Information of China (English)

    Dong Linxi; Chen Jindan; Yan Haixia; Huo Weihong; Li Yongjie; Sun Lingling

    2009-01-01

    The comb capacitances fabricated by deep reactive ion etching (RIE) process have high aspect ratio which is usually smaller than 30 : 1 for the complicated process factors, and the combs are usually not parallel due to the well-known micro-loading effect and other process factors, which restricts the increase of the seismic mass by increasing the thickness of comb to reduce the thermal mechanical noise and the decrease of the gap of the comb capacitances for increasing the sensitive capacitance to reduce the electrical noise. Aiming at the disadvantage of the deep RIE, a novel capacitive micro-accelerometer with grid strip capacitances and sensing gap alterable capacitances is developed. One part of sensing of inertial signal of the micro-accelerometer is by the grid strip capacitances whose overlapping area is variable and which do not have the non-parallel plate's effect caused by the deep RIE process. Another part is by the sensing gap alterable capacitances whose gap between combs can be reduced by the actuators. The designed initial gap of the alterable comb capacitances is relatively large to depress the effect of the maximum aspect ratio (30 : 1) of deep RIE process. The initial gap of the capacitance of the actuator is smaller than the one of the comb capacitances. The difference between the two gaps is the initial gap of the sensitive capacitor. The designed structure depresses greatly the requirement of deep RIE process. The effects of non-parallel combs on the accelerometer are also analyzed. The characteristics of the micro-accelerometer are discussed by field emission microscopy (FEM) tool ANSYS. The tested devices based on slide-film damping effect are fabricated, and the tested quality factor is 514, which shows that grid strip capacitance design can partly improve the resolution and also prove the feasibility of the designed silicon-glass anodically bonding process.

  5. 2D fluid-analytical simulation of electromagnetic effects in low pressure, high frequency electronegative capacitive discharges

    Science.gov (United States)

    Kawamura, E.; Lichtenberg, A. J.; Lieberman, M. A.; Marakhtanov, A. M.

    2016-06-01

    A fast 2D axisymmetric fluid-analytical multifrequency capacitively coupled plasma (CCP) reactor code is used to study center high nonuniformity in a low pressure electronegative chlorine discharge. In the code, a time-independent Helmholtz wave equation is used to solve for the capacitive fields in the linearized frequency domain. This eliminates the time dependence from the electromagnetic (EM) solve, greatly speeding up the simulations at the cost of neglecting higher harmonics. However, since the code allows up to three driving frequencies, we can add the two most important harmonics to the CCP simulations as the second and third input frequencies. The amplitude and phase of these harmonics are estimated by using a recently developed 1D radial nonlinear transmission line (TL) model of a highly asymmetric cylindrical discharge (Lieberman et al 2015 Plasma Sources Sci. Technol. 24 055011). We find that at higher applied frequencies, the higher harmonics contribute significantly to the center high nonuniformity due to their shorter plasma wavelengths.

  6. Concentration-Gradient Multichannel Flow-Stream Membrane Capacitive Deionization Cell for High Desalination Capacity of Carbon Electrodes.

    Science.gov (United States)

    Kim, Choonsoo; Lee, Juhan; Srimuk, Pattarachai; Aslan, Mesut; Presser, Volker

    2017-07-07

    We present a novel multichannel membrane flow-stream capacitive deionization (MC-MCDI) concept with two flow streams to control the environment around the electrodes and a middle channel for water desalination. The introduction of side channels to our new cell design allows operation in a highly saline environment, while the feed water stream in the middle channel (conventional CDI channel) is separated from the electrodes with anion- and cation-exchange membranes. At a high salinity gradient between side (1000 mm) and middle (5 mm) channels, MC-MCDI exhibited an unprecedented salt-adsorption capacity (SAC) of 56 mg g(-1) in the middle channel with charge efficiency close to unity and low energy consumption. This excellent performance corresponds to a fourfold increase in desalination performance compared to the state-of-the-art in a conventional CDI cell. The enhancement originates from the enhanced specific capacitance in high-molar saline media in agreement with the Gouy-Chapman-Stern theory and from a double-ion desorption/adsorption process of MC-MCDI through voltage operation from -1.2 to +1.2 V. © 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.

  7. Capacitance-voltage analysis of a high-k dielectric on silicon

    Institute of Scientific and Technical Information of China (English)

    Davinder Rathee; Sandeep K. Arya; Mukesh Kumar

    2012-01-01

    Device characteristics of TiO2 gate dielectrics deposited by a sol-gel method and DC sputtering method on a P-type silicon wafer are reported.Metal-oxide-semiconductor capacitors with Al as the top electrode were fabricated to study the electrical properties of TiO2 films.The films were physically characterized by using X-ray diffraction,a capacitor voltage measurement,scanning electron microscopy,and by spectroscopy ellipsometry.The XRD and DST-TG indicate the presence of an anatase TiO2 phase in the film.Films deposited at higher temperatures showed better crystallinity.The dielectric constant calculated using the capacitance voltage measurement was found to be 18 and 73 for sputtering and sol-gel samples respectively.The refractive indices of the films were found to be 2.16 for sputtering and 2.42 for sol-gel samples.

  8. Cation intercalation and high volumetric capacitance of two-dimensional titanium carbide.

    Science.gov (United States)

    Lukatskaya, Maria R; Mashtalir, Olha; Ren, Chang E; Dall'Agnese, Yohan; Rozier, Patrick; Taberna, Pierre Louis; Naguib, Michael; Simon, Patrice; Barsoum, Michel W; Gogotsi, Yury

    2013-09-27

    The intercalation of ions into layered compounds has long been exploited in energy storage devices such as batteries and electrochemical capacitors. However, few host materials are known for ions much larger than lithium. We demonstrate the spontaneous intercalation of cations from aqueous salt solutions between two-dimensional (2D) Ti3C2 MXene layers. MXenes combine 2D conductive carbide layers with a hydrophilic, primarily hydroxyl-terminated surface. A variety of cations, including Na(+), K(+), NH4(+), Mg(2+), and Al(3+), can also be intercalated electrochemically, offering capacitance in excess of 300 farads per cubic centimeter (much higher than that of porous carbons). This study provides a basis for exploring a large family of 2D carbides and carbonitrides in electrochemical energy storage applications using single- and multivalent ions.

  9. Simulation on measurement of five-DOF motion errors of high precision spindle with cylindrical capacitive sensor

    Science.gov (United States)

    Zhang, Min; Wang, Wen; Xiang, Kui; Lu, Keqing; Fan, Zongwei

    2015-02-01

    This paper describes a novel cylindrical capacitive sensor (CCS) to measure the spindle five degree-of-freedom (DOF) motion errors. The operating principle and mathematical models of the CCS are presented. Using Ansoft Maxwell software to calculate the different capacitances in different configurations, structural parameters of end face electrode are then investigated. Radial, axial and tilt motions are also simulated by making comparisons with the given displacements and the simulation values respectively. It could be found that the proposed CCS has a high accuracy for measuring radial motion error when the average eccentricity is about 15 μm. Besides, the maximum relative error of axial displacement is 1.3% when the axial motion is within [0.7, 1.3] mm, and the maximum relative error of the tilt displacement is 1.6% as rotor tilts around a single axis within [-0.6, 0.6]°. Finally, the feasibility of the CCS for measuring five DOF motion errors is verified through simulation and analysis.

  10. Technical evaluation of vehicle ignition systems: conduct differences between a high energy capacitive system and a standard inductive system

    Directory of Open Access Journals (Sweden)

    Bruno Santos Goulart

    2014-09-01

    Full Text Available An efficient combustion depends on many factors, such as injection, turbulence and ignition characteristics. With the improvement of internal combustion engines the turbulence intensity and internal pressure have risen, demanding more efficient and powerful ignition systems. In direct injection engines, the stratified charge resultant from the wall/air-guided or spray-guided system requires even more energy. The Paschen’s law shows that spark plug gap and mixture density are proportional to the dielectric rupture voltage. It is known that larger spark gaps promote higher efficiency in the internal combustion engines, since the mixture reaction rate rises proportionally. However, the ignition system must be adequate to the imposed gap, not only on energy, but also on voltage and spark duration. For the reported study in this work two test benches were built: a standard inductive ignition system and a capacitive discharge high energy ignition system, with variable voltage and capacitance. The influence of the important parameters energy and ignition voltage on the spark duration, as well as the electrode gap and shape were analyzed. It was also investigated the utilization of a coil with lower resistance and inductance values, as well as spark plugs with and without internal resistances.

  11. A fully enclosed, compact standard lightning impulse generator for testing ultra-high-voltage-class gas-insulated switchgears with high capacitance

    Science.gov (United States)

    Wen, Tao; Zhang, Qiaogen; Zhang, Lingli; Zhao, Junping; Liu, Xuandong; Li, Xiaoang; Guo, Can; You, Haoyang; Chen, Weijiang; Yin, Yu; Shi, Weidong

    2016-03-01

    At present, conducting standard lightning impulse (LI) tests in the field for gas-insulated switchgear (GIS) equipment is difficult because of the high capacitance of the test equipment and large circuit inductance of traditional impulse devices, which leads to a wavefront time Tf ≥ 2.5 μs. A novel fully enclosed, compact standard LI generator for testing ultra-high-voltage-class GIS equipment with high capacitance is presented to solve the problem of Tf exceeding the standard during LI voltage tests for actual large-sized equipment. The impulse generator is installed in a metal vessel filled with SF6 or SF6/N2 gas mixture at a pressure of 0.3-0.5 MPa, providing a more compact structure and a lower series inductance. A newly developed conical voltage sensor is used to accurately measure the output voltage waveform. Two test modes (via bushing docking and direct docking) for the GIS test based on the impulse generator are introduced. Calculation results show that the impulse generator can generate an LI test waveform following the present IEC standard for the test of equipment with capacitance >10 000 pF.

  12. BEOL compatible high tunnel magneto resistance perpendicular magnetic tunnel junctions using a sacrificial Mg layer as CoFeB free layer cap

    Energy Technology Data Exchange (ETDEWEB)

    Swerts, J., E-mail: Johan.Swerts@imec.be; Mertens, S.; Lin, T.; Couet, S.; Tomczak, Y.; Sankaran, K.; Pourtois, G.; Kim, W.; Meersschaut, J.; Souriau, L.; Radisic, D.; Van Elshocht, S.; Kar, G.; Furnemont, A. [imec, Kapeldreef 75, Leuven 3001 (Belgium)

    2015-06-29

    Perpendicularly magnetized MgO-based tunnel junctions are envisaged for future generation spin-torque transfer magnetoresistive random access memory devices. Achieving a high tunnel magneto resistance and preserving it together with the perpendicular magnetic anisotropy during BEOL CMOS processing are key challenges to overcome. The industry standard technique to deposit the CoFeB/MgO/CoFeB tunnel junctions is physical vapor deposition. In this letter, we report on the use of an ultrathin Mg layer as free layer cap to protect the CoFeB free layer from sputtering induced damage during the Ta electrode deposition. When Ta is deposited directly on CoFeB, a fraction of the surface of the CoFeB is sputtered even when Ta is deposited with very low deposition rates. When depositing a thin Mg layer prior to Ta deposition, the sputtering of CoFeB is prevented. The ultra-thin Mg layer is sputtered completely after Ta deposition. Therefore, the Mg acts as a sacrificial layer that protects the CoFeB from sputter-induced damage during the Ta deposition. The Ta-capped CoFeB free layer using the sacrificial Mg interlayer has significantly better electrical and magnetic properties than the equivalent stack without protective layer. We demonstrate a tunnel magneto resistance increase up to 30% in bottom pinned magnetic tunnel junctions and tunnel magneto resistance values of 160% at resistance area product of 5 Ω.μm{sup 2}. Moreover, the free layer maintains perpendicular magnetic anisotropy after 400 °C annealing.

  13. BEOL compatible high tunnel magneto resistance perpendicular magnetic tunnel junctions using a sacrificial Mg layer as CoFeB free layer cap

    Science.gov (United States)

    Swerts, J.; Mertens, S.; Lin, T.; Couet, S.; Tomczak, Y.; Sankaran, K.; Pourtois, G.; Kim, W.; Meersschaut, J.; Souriau, L.; Radisic, D.; Van Elshocht, S.; Kar, G.; Furnemont, A.

    2015-06-01

    Perpendicularly magnetized MgO-based tunnel junctions are envisaged for future generation spin-torque transfer magnetoresistive random access memory devices. Achieving a high tunnel magneto resistance and preserving it together with the perpendicular magnetic anisotropy during BEOL CMOS processing are key challenges to overcome. The industry standard technique to deposit the CoFeB/MgO/CoFeB tunnel junctions is physical vapor deposition. In this letter, we report on the use of an ultrathin Mg layer as free layer cap to protect the CoFeB free layer from sputtering induced damage during the Ta electrode deposition. When Ta is deposited directly on CoFeB, a fraction of the surface of the CoFeB is sputtered even when Ta is deposited with very low deposition rates. When depositing a thin Mg layer prior to Ta deposition, the sputtering of CoFeB is prevented. The ultra-thin Mg layer is sputtered completely after Ta deposition. Therefore, the Mg acts as a sacrificial layer that protects the CoFeB from sputter-induced damage during the Ta deposition. The Ta-capped CoFeB free layer using the sacrificial Mg interlayer has significantly better electrical and magnetic properties than the equivalent stack without protective layer. We demonstrate a tunnel magneto resistance increase up to 30% in bottom pinned magnetic tunnel junctions and tunnel magneto resistance values of 160% at resistance area product of 5 Ω.μm2. Moreover, the free layer maintains perpendicular magnetic anisotropy after 400 °C annealing.

  14. Swing arm profilometer: high accuracy testing for large reaction-bonded silicon carbide optics with a capacitive probe

    Science.gov (United States)

    Xiong, Ling; Luo, Xiao; Hu, Hai-xiang; Zhang, Zhi-yu; Zhang, Feng; Zheng, Li-gong; Zhang, Xue-jun

    2017-08-01

    A feasible way to improve the manufacturing efficiency of large reaction-bonded silicon carbide optics is to increase the processing accuracy in the ground stage before polishing, which requires high accuracy metrology. A swing arm profilometer (SAP) has been used to measure large optics during the ground stage. A method has been developed for improving the measurement accuracy of SAP using a capacitive probe and implementing calibrations. The experimental result compared with the interferometer test shows the accuracy of 0.068 μm in root-mean-square (RMS) and maps in 37 low-order Zernike terms show accuracy of 0.048 μm RMS, which shows a powerful capability to provide a major input in high-precision grinding.

  15. Design of high-throughput and low-power true random number generator utilizing perpendicularly magnetized voltage-controlled magnetic tunnel junction

    Directory of Open Access Journals (Sweden)

    Hochul Lee

    2017-05-01

    Full Text Available A true random number generator based on perpendicularly magnetized voltage-controlled magnetic tunnel junction devices (MRNG is presented. Unlike MTJs used in memory applications where a stable bit is needed to store information, in this work, the MTJ is intentionally designed with small perpendicular magnetic anisotropy (PMA. This allows one to take advantage of the thermally activated fluctuations of its free layer as a stochastic noise source. Furthermore, we take advantage of the voltage dependence of anisotropy to temporarily change the MTJ state into an unstable state when a voltage is applied. Since the MTJ has two energetically stable states, the final state is randomly chosen by thermal fluctuation. The voltage controlled magnetic anisotropy (VCMA effect is used to generate the metastable state of the MTJ by lowering its energy barrier. The proposed MRNG achieves a high throughput (32 Gbps by implementing a 64×64 MTJ array into CMOS circuits and executing operations in a parallel manner. Furthermore, the circuit consumes very low energy to generate a random bit (31.5 fJ/bit due to the high energy efficiency of the voltage-controlled MTJ switching.

  16. Design of high-throughput and low-power true random number generator utilizing perpendicularly magnetized voltage-controlled magnetic tunnel junction

    Science.gov (United States)

    Lee, Hochul; Ebrahimi, Farbod; Amiri, Pedram Khalili; Wang, Kang L.

    2017-05-01

    A true random number generator based on perpendicularly magnetized voltage-controlled magnetic tunnel junction devices (MRNG) is presented. Unlike MTJs used in memory applications where a stable bit is needed to store information, in this work, the MTJ is intentionally designed with small perpendicular magnetic anisotropy (PMA). This allows one to take advantage of the thermally activated fluctuations of its free layer as a stochastic noise source. Furthermore, we take advantage of the voltage dependence of anisotropy to temporarily change the MTJ state into an unstable state when a voltage is applied. Since the MTJ has two energetically stable states, the final state is randomly chosen by thermal fluctuation. The voltage controlled magnetic anisotropy (VCMA) effect is used to generate the metastable state of the MTJ by lowering its energy barrier. The proposed MRNG achieves a high throughput (32 Gbps) by implementing a 64 ×64 MTJ array into CMOS circuits and executing operations in a parallel manner. Furthermore, the circuit consumes very low energy to generate a random bit (31.5 fJ/bit) due to the high energy efficiency of the voltage-controlled MTJ switching.

  17. A Study of Dip-Coatable, High-Capacitance Ion Gel Dielectrics for 3D EWOD Device Fabrication

    Directory of Open Access Journals (Sweden)

    Carlos E. Clement

    2017-01-01

    Full Text Available We present a dip-coatable, high-capacitance ion gel dielectric for scalable fabrication of three-dimensional (3D electrowetting-on-dielectric (EWOD devices such as an n × n liquid prism array. Due to the formation of a nanometer-thick electric double layer (EDL capacitor, an ion gel dielectric offers two to three orders higher specific capacitance (c ≈ 10 μF/cm2 than that of conventional dielectrics such as SiO2. However, the previous spin-coating method used for gel layer deposition poses several issues for 3D EWOD device fabrication, particularly when assembling multiple modules. Not only does the spin-coating process require multiple repetitions per module, but the ion gel layer also comes in risks of damage or contamination due to handling errors caused during assembly. In addition, it was observed that the chemical formulation previously used for the spin-coating method causes the surface defects on the dip-coated gel layers and thus leads to poor EWOD performance. In this paper, we alternatively propose a dip-coating method with modified gel solutions to obtain defect-free, functional ion gel layers without the issues arising from the spin-coating method for 3D device fabrication. A dip-coating approach offers a single-step coating solution with the benefits of simplicity, scalability, and high throughput for deposition of high-capacitance gel layers on non-planar EWOD devices. An ion gel solution was prepared by combining the [EMIM][TFSI] ionic liquid and the [P(VDF-HFP] copolymer at various wt % ratios in acetone solvent. Experimental studies were conducted to fully understand the effects of chemical composition ratios in the gel solution and how varying thicknesses of ion gel and Teflon layers affects EWOD performance. The effectiveness and potentiality of dip-coatable gel layers for 3D EWOD devices have been demonstrated through fabricating 5 × 1 arrayed liquid prisms using a single-step dip-coating method. Each prism module has

  18. Facile synthesis of novel graphene sponge for high performance capacitive deionization

    Science.gov (United States)

    Xu, Xingtao; Pan, Likun; Liu, Yong; Lu, Ting; Sun, Zhuo; Chua, Daniel H. C.

    2015-02-01

    Capacitive deionization (CDI) is an effective desalination technique offering an appropriate route to obtain clean water. In order to obtain excellent CDI performance, a rationally designed structure of electrode materials has been an urgent need for CDI application. In this work, a novel graphene sponge (GS) was proposed as CDI electrode for the first time. The GS was fabricated via directly freeze-drying graphene oxide solution followed by annealing in nitrogen atmosphere. The morphology, structure and electrochemical performance of GS were characterized by scanning electron microscopy, Raman spectroscopy, nitrogen adsorption-desorption, X-ray photoelectron spectroscopy, cyclic voltammetry and electrochemical impedance spectroscopy. The electrosorption performance of GS in NaCl solution was studied and compared with pristine graphene (PG). The results show that due to the unique 3D interconnected porous structure, large accessible surface area and low charge transfer resistance, GS electrode exhibits an ultrahigh electrosorption capacity of 14.9 mg g-1 when the initial NaCl concentration is ~500 mg L-1, which is about 3.2 times of that of PG (4.64 mg g-1), and to our knowledge, it should be the highest value reported for graphene electrodes in similar experimental conditions by now. These results indicate that GS should be a promising candidate for CDI electrode.

  19. Microwave Assisted Synthesis of Porous NiCo2O4 Microspheres: Application as High Performance Asymmetric and Symmetric Supercapacitors with Large Areal Capacitance

    Science.gov (United States)

    Khalid, Syed; Cao, Chuanbao; Wang, Lin; Zhu, Youqi

    2016-03-01

    Large areal capacitance is essentially required to integrate the energy storage devices at the microscale electronic appliances. Energy storage devices based on metal oxides are mostly fabricated with low mass loading per unit area which demonstrated low areal capacitance. It is still a challenge to fabricate supercapacitor devices of porous metal oxides with large areal capacitance. Herein we report microwave method followed by a pyrolysis of the as-prepared precursor is used to synthesize porous nickel cobaltite microspheres. Porous NiCo2O4 microspheres are capable to deliver large areal capacitance due to their high specific surface area and small crystallite size. The facile strategy is successfully demonstrated to fabricate aqueous-based asymmetric & symmetric supercapacitor devices of porous NiCo2O4 microspheres with high mass loading of electroactive materials. The asymmetric & symmetric devices exhibit maximum areal capacitance and energy density of 380 mF cm‑2 & 19.1 Wh Kg‑1 and 194 mF cm‑2 & 4.5 Wh Kg‑1 (based on total mass loading of 6.25 & 6.0 mg) respectively at current density of 1 mA cm‑2. The successful fabrication of symmetric device also indicates that NiCo2O4 can also be used as the negative electrode material for futuristic asymmetric devices.

  20. Fabrication and application of a wireless inductance-capacitance coupling microsensor with electroplated high permeability material NiFe

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Y H; Chang, I N [Ph. D. Program in Electrical and Communications Engineering, Feng-Chia University, Taichung 40724, Taiwan (China); Chang, H C; Lai, C C, E-mail: hcchang@fcu.edu.tw [Department of Automatic Control Engineering, Feng-Chia University, Taichung 40724, Taiwan (China)

    2011-01-01

    A fully integrated wireless inductance-capacitance (LC) coupling microsensor was designed and fabricated by MEMS technology. The sensing loop was formed by connecting a deformable parallel-plated capacitor and a planar spiral inductor with a Ni(80)Fe(20) core. Polyimide and PMMA were used to isolate and package the devices. Typical dimension of the sensors was 5 x 5 mm{sup 2} x 0.77 mm. Different electroplated inductive coils (30, 40, and 60 turns) were fabricated to connect with a 4 x 4 mm{sup 2} plate capacitor in series. The LC sensing module for measuring liquid-level induced frequency responses was setup. Experimental results show that frequency response decreased as liquid level increased and sensitivity is about 7.01 kHz/cm with deviation less than 2%. Developed planar spiral inductor with high permeability magnetic core can provide a wide range of frequency variation in LC sensing applications.

  1. Design of a High Voltage Bidirectional DC-DC Converter for Driving Capacitive Incremental Actuators usable in Electric Vehicles (EVs)

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Zhang, Zhe; Andersen, Michael A. E.

    2014-01-01

    the converter for efficiently charging and discharging the capacitive actuator from 0 V to 2.5 kV and vice versa, respectively. The converter is used to drive a dielectric electro active polymer (DEAP) based capacitive incremental actuator, which has the potential to be used in automotive (e.g., EVs), space...

  2. Binder-free activated graphene compact films for all-solid-state micro-supercapacitors with high areal and volumetric capacitances

    DEFF Research Database (Denmark)

    Wu, Zhong Shuai; Yang, Sheng; Zhang, Lili;

    2015-01-01

    Micro-supercapacitors (MSCs) hold great promise as highly competitive miniaturized power sources satisfying the increased demand in microelectronics; however, simultaneously achieving high areal and volumetric capacitances is still a great challenge. Here we demonstrated the designed construction......-MSCs are competitive for prospective applications of miniaturized energy storage devices....

  3. Capacitance variation measurement method with a continuously variable measuring range for a micro-capacitance sensor

    Science.gov (United States)

    Lü, Xiaozhou; Xie, Kai; Xue, Dongfeng; Zhang, Feng; Qi, Liang; Tao, Yebo; Li, Teng; Bao, Weimin; Wang, Songlin; Li, Xiaoping; Chen, Renjie

    2017-10-01

    Micro-capacitance sensors are widely applied in industrial applications for the measurement of mechanical variations. The measurement accuracy of micro-capacitance sensors is highly dependent on the capacitance measurement circuit. To overcome the inability of commonly used methods to directly measure capacitance variation and deal with the conflict between the measurement range and accuracy, this paper presents a capacitance variation measurement method which is able to measure the output capacitance variation (relative value) of the micro-capacitance sensor with a continuously variable measuring range. We present the principles and analyze the non-ideal factors affecting this method. To implement the method, we developed a capacitance variation measurement circuit and carried out experiments to test the circuit. The result shows that the circuit is able to measure a capacitance variation range of 0–700 pF linearly with a maximum relative accuracy of 0.05% and a capacitance range of 0–2 nF (with a baseline capacitance of 1 nF) with a constant resolution of 0.03%. The circuit is proposed as a new method to measure capacitance and is expected to have applications in micro-capacitance sensors for measuring capacitance variation with a continuously variable measuring range.

  4. Aluminum-Ion-Intercalation Supercapacitors with Ultrahigh Areal Capacitance and Highly Enhanced Cycling Stability: Power Supply for Flexible Electrochromic Devices.

    Science.gov (United States)

    Li, Kerui; Shao, Yuanlong; Liu, Shiyi; Zhang, Qinghong; Wang, Hongzhi; Li, Yaogang; Kaner, Richard B

    2017-05-01

    Electrochemical capacitor systems based on Al ions can offer the possibilities of low cost and high safety, together with a three-electron redox-mechanism-based high capacity, and thus are expected to provide a feasible solution to meet ever-increasing energy demands. Here, highly efficient Al-ion intercalation into W18 O49 nanowires (W18 O49 NWs) with wide lattice spacing and layered single-crystal structure for electrochemical storage is demonstrated. Moreover, a freestanding composite film with a hierarchical porous structure is prepared through vacuum-assisted filtration of a mixed dispersion containing W18 O49 NWs and single-walled carbon nanotubes. The as-prepared composite electrode exhibits extremely high areal capacitances of 1.11-2.92 F cm(-2) and 459 F cm(-3) at 2 mA cm(-2) , enhanced electrochemical stability in the Al(3+) electrolyte, as well as excellent mechanical properties. An Al-ion-based, flexible, asymmetric electrochemical capacitor is assembled that displays a high volumetric energy density of 19.0 mWh cm(-3) at a high power density of 295 mW cm(-3) . Finally, the Al-ion-based asymmetric supercapacitor is used as the power source for poly(3-hexylthiophene)-based electrochromic devices, demonstrating their promising capability in flexible electronic devices. © 2017 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  5. Tuning the magnetic properties and surface morphology of D022 Mn3-δGa films with high perpendicular magnetic anisotropy by N doping

    Science.gov (United States)

    Lee, Hwachol; Sukegawa, Hiroaki; Liu, Jun; Mitani, Seiji; Hono, Kazuhiro

    2016-10-01

    We report the tunable magnetic properties and the smoothened surface morphology of epitaxial D022 Mn-Ga (Mn3Ga and Mn2.5Ga) films by N doping using reactive sputtering at 480 °C. The 50 nm thick Mn-Ga films grown with the N2/Ar gas flow rate (η) up to 0.66% showed 33%-50% reduction in the saturation magnetization compared to non-doped Mn-Ga. In particular, a single D022 phase was obtained in an optimal η range for Mn2.5Ga, resulted in the perpendicular magnetic anisotropy energy density of ˜1 MJ/m3 with 33% reduction in magnetization. Furthermore, the introduction of N provided the smoothened surface morphology at 50 nm thickness despite its high growth temperature, which is advantageous for thin film device applications.

  6. Atomically thin Co3O4 nanosheet-coated stainless steel mesh with enhanced capacitive Na+ storage for high-performance sodium-ion batteries

    Science.gov (United States)

    Dou, Yuhai; Wang, Yunxiao; Tian, Dongliang; Xu, Jiantie; Zhang, Zhijia; Liu, Qiannan; Ruan, Boyang; Ma, Jianmin; Sun, Ziqi; Xue Dou, Shi

    2017-03-01

    Capacitive storage (e.g., double layer capacitance and pseudocapacitance) with Na+ stored mainly at the surface or interface of the active materials rather than inserted into the bulk crystal is an effective approach to achieve high rate capability and long cycle life in sodium-ion batteries (SIBs). Herein, atomically thin Co3O4 nanosheets are successfully synthesized and grown directly on the stainless steel mesh as an anode material for SIBs. This anode delivers a high average capacity of 509.2 mAh g-1 for the initial 20 cycles (excluding the first cycle) at 50 mA g-1, presents excellent rate capability with an average capacity of 427.0 mAh g-1 at 500 mA g-1, and exhibits high cycling stability, which significantly outperforms the electrode prepared from conventional Co3O4 nanostructures, the electrode prepared by conventional casting method, and previously reported Co3O4 electrodes. The superior electrochemical performance is mainly attributable to the atomic thickness of the Co3O4 nanosheets and the direct growth method in electrode processing, which lead to remarkably enhanced surface redox pseudocapacitance and interfacial double layer capacitance. This Na+ capacitive storage mechanism provides a promising strategy for the development of electrode materials with high energy and power densities and ultralong cycle life for SIBs.

  7. Capacitive deionization of seawater

    Energy Technology Data Exchange (ETDEWEB)

    Farmer, J.C.; Fix, D.V.; Mack, G.V. [and others

    1995-10-01

    Capacitive deionization with carbon aerogel electrodes is an efficient and economical new process for removing salt and impurities from water. Carbon aerogel is a material that enables the successful purification of water because of its high surface area, optimum pore size, and low electrical resistivity. The electrodes are maintained at a potential difference of about one volt; ions are removed from the water by the imposed electrostatic field and retained on the electrode surface until the polarity is reversed. The capacitive deionization of water with a stack of carbon aerogel electrodes has been successfully demonstrated. The overall process offers advantages when compared to conventional water-purification methods, requiring neither pumps, membranes, distillation columns, nor thermal heaters. Consequently, the overall process is both robust and energy efficient. The current state of technology development, commercialization, and potential applications of this process are reviewed.

  8. Evidence for higher twist mechanisms in high p sub perpendicular sub to. pi. sup - p events with prompt. rho. sup 0 production at 38 GeV/c

    Energy Technology Data Exchange (ETDEWEB)

    Bannikov, A.V.; Bohm, J.; Grishkevich, Ya.V.; Krumstein, Z.V.; Merekov, Yu.P.; Petrukhin, V.I.; Piska, K.; Shelkov, G.A.; Vertogradov, L.S. (Joint Inst. for Nuclear Research, Dubna (USSR)); Dominik, W. (Warsaw Univ. (Poland). Inst. Fizyki Doswiadczalnej); Gemesy, T.; Jenik, L.; Krasznovszky, J.; Pinter, G. (Hungarian Academy of Sciences, Budapest (Hungary). Central Research Inst. for Physics); Javrishvili, A.K.; Kharchilava, A.I.; Lomtadze, T.A. (AN Gruzinskoy SSR, Tbilisi (USSR). Inst. Fiziki); Krysteva, V.; Nedev, S.; Penev, V.N.; Shklovskaja, A.I. (Bylgarska Akademiya na Naukite, Sofia (Bulgaria). Inst. za Yadrena Izsledvaniya i Yadrena Energetika); Safarik, K. (Slovenska Akademia Vied, Kosice (Czechoslovakia). Ustav Experimentalnej Fyziky); Valkar, S.; Zavada, P. (Karlova Univ., Prague (Czechoslovakia). Inst. of Physics Karlova Univ., Prague (Czechoslovakia). Nuclear Center); RISK Collaboration

    1991-02-01

    The {pi}{sup -}p interactions with at least one charged secondary produced at polar angle {approx equal} 90deg in c.m.s. and having the transverse momentum above 1 GeV/c were investigated. The data were obtained using streamer chamber magnetic spectrometer RISK at 38 GeV/c {pi}{sup -} beam from Serpukhov accelerator. The analyzis of associated production in reconstructed events suggests, that if the transverse momentum of a pair of oppositely charged secondaries compensates the trigger particle p{sub perpendicular} {sub to} practically completely, this pair is the product of the {rho}{sup 0}-meson decay in marked fraction of such events. We observed a large spin-alignment for the {rho}{sup 0}-mesons selected as described above: The probability of zero spin projection onto the normal to the {rho}{sup 0} production plane is equal to {rho}{sup T}{sub 00}=0.86{plus minus}0.23. The enhancement of the number of events, in which the {rho}{sup 0} picks up practically full momentum transfer carrying by the exchange, and also the enlarged tensor polarization for the {rho}{sup 0}-mesons in these events could be qualitatively explained as manifestation of direct {rho}{sup 0}-production via the QCD higher twist processes in the high p{sub perpendicular} {sub to}(anti {pi})p collisions. At the same time, the observed effects are markedly larger, than the values predicted with QCD model, in which the higher twist corrections were included. (orig.).

  9. Relevance of GaAs(001) surface electronic structure for high frequency dispersion on n-type accumulation capacitance

    Science.gov (United States)

    Pi, T. W.; Chen, W. S.; Lin, Y. H.; Cheng, Y. T.; Wei, G. J.; Lin, K. Y.; Cheng, C.-P.; Kwo, J.; Hong, M.

    2017-01-01

    This study investigates the origin of long-puzzled high frequency dispersion on the accumulation region of capacitance-voltage characteristics in an n-type GaAs-based metal-oxide-semiconductor. Probed adatoms with a high Pauling electronegativity, Ag and Au, unexpectedly donate charge to the contacted As/Ga atoms of as-grown α2 GaAs(001)-2 × 4 surfaces. The GaAs surface atoms behave as charge acceptors, and if not properly passivated, they would trap those electrons accumulated at the oxide and semiconductor interface under a positive bias. The exemplified core-level spectra of the Al2O3/n-GaAs(001)-2 × 4 and the Al2O3/n-GaAs(001)-4 × 6 interfaces exhibit remnant of pristine surface As emission, thereby causing high frequency dispersion in the accumulation region. For the p-type GaAs, electrons under a negatively biased condition are expelled from the interface, thereby avoiding becoming trapped.

  10. A Numerical Technique for Removing Residual Gate-Source Capacitances When Extracting Parasitic Inductance for GaN High Electron Mobility Transistors (HEMTs)

    Science.gov (United States)

    2011-03-01

    Residual Gate-source Capacitances When Extracting Parasitic Inductance for GaN High Electron Mobility Transistors ( HEMTs ) Benjamin Huebschman and Pankaj...Extracting Parasitic Inductance for GaN High Electron Mobility Transistors ( HEMTs ) 5a. CONTRACT NUMBER 5b. GRANT NUMBER 5c. PROGRAM ELEMENT NUMBER 6...nitride ( GaN ) high electron mobility transistors ( HEMTs ) begin to realize their performance potential, and to transition from experimental devices to

  11. Capacitance characteristics of low-k low-cost CVD grown polyimide liner for high-density Cu through-Si-via in three-dimensional LSI

    Science.gov (United States)

    Mariappan, Murugesan; Fukushima, Takafumi; Bea, Ji-Chel; Hashimoto, Hiroyuki; Koyanagi, Mitsumasa

    2016-04-01

    Minimization of the parasitic capacitance arising from Cu-through-Si-vias (TSVs) has been rigorously considered in order to enhance the performances of three-dimensional (3D) LSIs. We have systematically investigated the role of chemical vapor deposited (CVD) polyimide (PI) liner in Cu-TSVs in reducing the TSV capacitance. It is confirmed that CVD grown PI greatly helps to reduce the TSV capacitance as compared to the conventional PECVD-SiO2 liner. In addition to that the presence of very small hysteresis and a negligible flat-band voltage shift along the voltage axis confirms the suitability of PI liner as dielectric in the Cu-TSVs, if it were operated below the bias voltages of ±20 V. In over all, the large reduction in capacitance along with the conformal deposition of PI in the TSVs having less than 3 µm-width with aspect ratios greater than 10 reveals that CVD grown PI has the potential application in the future 3D-LSIs with highly scaled TSV.

  12. Ultrahigh-rate supercapacitors with large capacitance based on edge oriented graphene coated carbonized cellulous paper as flexible freestanding electrodes

    Science.gov (United States)

    Ren, Guofeng; Li, Shiqi; Fan, Zhao-Xia; Hoque, Md Nadim Ferdous; Fan, Zhaoyang

    2016-09-01

    Large-capacitance and ultrahigh-rate electrochemical supercapacitors (UECs) with frequency response up to kilohertz (kHz) range are reported using light, thin, and flexible freestanding electrodes. The electrode is formed by perpendicularly edge oriented multilayer graphene/thin-graphite (EOG) sheets grown radially around individual fibers in carbonized cellulous paper (CCP), with cellulous carbonization and EOG deposition implemented in one step. The resulted ∼10 μm thick EOG/CCP electrode is light and flexible. The oriented porous structure of EOG with large surface area, in conjunction with high conductivity of the electrode, ensures ultrahigh-rate performance of the fabricated cells, with large areal capacitance of 0.59 mF cm-2 and 0.53 mF cm-2 and large phase angle of -83° and -80° at 120 Hz and 1 kHz, respectively. Particularly, the hierarchical EOG/CCP sheet structure allows multiple sheets stacked together for thick electrodes with almost linearly increased areal capacitance while maintaining the volumetric capacitance nearly no degradation, a critical merit for developing practical faraday-scale UECs. 3-layers of EOG/CCP electrode achieved an areal capacitance of 1.5 mF cm-2 and 1.4 mF cm-2 at 120 Hz and 1 kHz, respectively. This demonstration moves a step closer to the goal of bridging the frequency/capacitance gap between supercapacitors and electrolytic capacitors.

  13. Field-dependent critical state of high-Tc superconducting strip simultaneously exposed to transport current and perpendicular magnetic field

    Science.gov (United States)

    Xue, Cun; He, An; Yong, Huadong; Zhou, Youhe

    2013-12-01

    We present an exact analytical approach for arbitrary field-dependent critical state of high-Tc superconducting strip with transport current. The sheet current and flux-density profiles are derived by solving the integral equations, which agree with experiments quite well. For small transport current, the approximate explicit expressions of sheet current, flux-density and penetration depth for the Kim model are derived based on the mean value theorem for integration. We also extend the results to the field-dependent critical state of superconducting strip in the simultaneous presence of applied field and transport current. The sheet current distributions calculated by the Kim model agree with experiments better than that by the Bean model. Moreover, the lines in the Ia-Ba plane for the Kim model are not monotonic, which is quite different from that the Bean model. The results reveal that the maximum transport current in thin superconducting strip will decrease with increasing applied field which vanishes for the Bean model. The results of this paper are useful to calculate ac susceptibility and ac loss.

  14. Field-dependent critical state of high-Tc superconducting strip simultaneously exposed to transport current and perpendicular magnetic field

    Directory of Open Access Journals (Sweden)

    Cun Xue

    2013-12-01

    Full Text Available We present an exact analytical approach for arbitrary field-dependent critical state of high-Tc superconducting strip with transport current. The sheet current and flux-density profiles are derived by solving the integral equations, which agree with experiments quite well. For small transport current, the approximate explicit expressions of sheet current, flux-density and penetration depth for the Kim model are derived based on the mean value theorem for integration. We also extend the results to the field-dependent critical state of superconducting strip in the simultaneous presence of applied field and transport current. The sheet current distributions calculated by the Kim model agree with experiments better than that by the Bean model. Moreover, the lines in the Ia-Ba plane for the Kim model are not monotonic, which is quite different from that the Bean model. The results reveal that the maximum transport current in thin superconducting strip will decrease with increasing applied field which vanishes for the Bean model. The results of this paper are useful to calculate ac susceptibility and ac loss.

  15. Field-dependent critical state of high-Tc superconducting strip simultaneously exposed to transport current and perpendicular magnetic field

    Energy Technology Data Exchange (ETDEWEB)

    Xue, Cun; He, An; Yong, Huadong; Zhou, Youhe, E-mail: zhouyh@lzu.edu.cn [Key Laboratory of Mechanics on Disaster and Environment in Western China attached to the Ministry of Education of China, and Department of Mechanics and Engineering Sciences, College of Civil Engineering and Mechanics, Lanzhou University, Lanzhou, Gansu 730000 (China)

    2013-12-15

    We present an exact analytical approach for arbitrary field-dependent critical state of high-T{sub c} superconducting strip with transport current. The sheet current and flux-density profiles are derived by solving the integral equations, which agree with experiments quite well. For small transport current, the approximate explicit expressions of sheet current, flux-density and penetration depth for the Kim model are derived based on the mean value theorem for integration. We also extend the results to the field-dependent critical state of superconducting strip in the simultaneous presence of applied field and transport current. The sheet current distributions calculated by the Kim model agree with experiments better than that by the Bean model. Moreover, the lines in the I{sub a}-B{sub a} plane for the Kim model are not monotonic, which is quite different from that the Bean model. The results reveal that the maximum transport current in thin superconducting strip will decrease with increasing applied field which vanishes for the Bean model. The results of this paper are useful to calculate ac susceptibility and ac loss.

  16. Capacitance Variation of Electrolyte-Gated Bilayer Graphene Based Transistors

    OpenAIRE

    Hediyeh Karimi; Rubiyah Yusof; Mohammad Taghi Ahmadi; Mehdi Saeidmanesh; Meisam Rahmani; Elnaz Akbari; Wong King Kiat

    2013-01-01

    Quantum capacitance of electrolyte-gated bilayer graphene field-effect transistors is investigated in this paper. Bilayer graphene has received huge attention due to the fact that an energy gap could be opened by chemical doping or by applying external perpendicular electric field. So, this extraordinary property can be exploited to use bilayer graphene as a channel in electrolyte-gated field-effect transistors. The quantum capacitance of bi-layer graphene with an equivalent circuit is presen...

  17. Design and implementation of capacitive micromachined ultrasonic transducers for high intensity focused ultrasound

    OpenAIRE

    Yamaner, Yalçın Feysel; Yamaner, Yalcin Feysel

    2011-01-01

    High intensity focused ultrasound (HIFU) is a medical procedure for noninvasive treatment of cancers. High intensity focused ultrasound is used to heat and destroy the diseased tissue. Piezoelectricity has been the core mechanism for generation of ultrasound waves in the treatment. Focusing can be done by using spherically curved transducers or using a lens or electronically steering sound waves by using phased arrays. Current research in HIFU technology targets the development of MR-guided m...

  18. High thermal stability in W/MgO/CoFeB/W/CoFeB/W stacks via ultrathin W insertion with perpendicular magnetic anisotropy

    Science.gov (United States)

    Liu, Yi; Yu, Tao; Zhu, Zhengyong; Zhong, Huicai; Khamis, Khamis Masoud; Zhu, Kaigui

    2016-07-01

    The perpendicular magnetic anisotropy (PMA) of a series of top MgO/CoFeB/W stacks were studied. In these stacks, the thickness of CoFeB is limited in a range of 1.1-2.2 nm. It was found that the stack can still maintain PMA in a 1.9 nm thick CoFeB free layer. Besides, we investigated the thermal stability factor ∆ of a spin transfer torque magnetic random access memory (STT-MRAM) by inserting an ultra-thin W film of 0.8 nm between two CoFeB films. The result shows a clear PMA behavior for the samples with CoFeB thickness up to 2.5 nm, and an in-plane magnetic anisotropy (IMA) when the CoFeB is thicker than 2.5 nm. Moreover, the thermal stability factor ∆ of the CoFeB stack with W insertion is about 132 for a 50 nm size STT-MRAM device, which is remarkably improved compared to 112 for a sample without W insertion. Our results represent an alternative way to realize the endurance at high annealing temperature, high-density and high ∆ in STT-MRAM device by ultra-thin W insertion.

  19. High perpendicular hard magnetic properties of nanocomposite Co-rich Co-Pt/Pt double-layered films by epitaxial deposition without capped layer

    Energy Technology Data Exchange (ETDEWEB)

    Chen, S.C., E-mail: chensc@mail.mcut.edu.t [Department of Materials Engineering, MingChi University of Technology, Taipei 243, Taiwan (China); Kuo, P.C.; Shen, C.L.; Hsu, S.L.; Fang, Y.H.; Lin, G.P.; Huang, K.T. [Institute of Materials Science and Engineering, National Taiwan University, Taipei 106, Taiwan (China)

    2009-07-01

    The HRTEM cross-sectional lattice image shows that a well epitaxial growth of hcp Co-rich Co-Pt (002) on Pt (111) underlayer leads to good perpendicular magnetic anisotropy of Co-rich Co-Pt film. It is found that both the perpendicular coercivity (Hc{sub perpendicular}) and perpendicular squareness (S{sub perpendicular}) of Co-rich Co-Pt films without Pt capped layer are larger than that of Co-rich Co-Pt films with Pt capped layer. The cross-sectional TEM-EDS and AES analysis confirm that the oxygen atoms will diffuse from film surface into the Co-rich Co-Pt film without adding Pt capped layer, and it react with cobalt atoms to form CoO, which is detected by XPS analysis. The increase in perpendicular hard magnetic properties of Co-rich Co-Pt film without Pt capped layer is mainly due to form CoO in the Co-rich Co-Pt film.

  20. Arsenic-doped high-resistivity-silicon epitaxial layers for integrating low-capacitance diodes

    NARCIS (Netherlands)

    Sakic, A.; Scholtes, T.L.M.; De Boer, W.B.; Golshani, N.; Derakhshandeh, J.; Nanver, L.K.

    2011-01-01

    An arsenic doping technique for depositing up to 40-μm-thick high-resistivity layers is presented for fabricating diodes with low RC constants that can be integrated in closely-packed configurations. The doping of the as-grown epi-layers is controlled down to 5 × 1011 cm−3, a value that is solely li

  1. Highly (001) oriented L1{sub 0}-CoPt/TiN multilayer films on glass substrates with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    An, Hongyu; Sannomiya, Takumi; Muraishi, Shinji; Nakamura, Yoshio; Shi, Ji, E-mail: shi.j.aa@m.titech.ac.jp [Department of Metallurgy and Ceramics Science, Tokyo Institute of Technology, 2-12-1, Ookayama, Meguro-ku, Tokyo 152-8552 (Japan); Xie, Qian; Zhang, Zhengjun [Key Laboratory of Advanced Materials, School of Materials Science and Engineering, Tsinghua University, Beijing 100084 (China); Wang, Jian [National Institute for Materials Science (NIMS), Sengen 1-2-1, Tsukuba, Ibaraki 305-0047 (Japan)

    2015-03-15

    To obtain strong perpendicular magnetic anisotropy (PMA) based on L1{sub 0} structure for magnetic storage devices, costly single crystalline substrates are generally required to achieve (001) texture. Recently, various studies also have focused on depositing different kinds of seed layers on glass or other amorphous substrates to promote (001) preferred orientation of L1{sub 0} CoPt and FePt. TiN is a very promising seed layer material because of its cubic crystalline structure (similar to MgO) and excellent diffusion barring property even at high temperatures. In the present work, highly (001) oriented L1{sub 0}-CoPt/TiN multilayer films have been successfully deposited on glass substrates. After annealing at 700 °C, the film exhibits PMA, and a strong (001) peak is detected from the x-ray diffraction profiles, indicating the ordering transformation of CoPt layers from fcc (A1) to L1{sub 0} structure. It also is found that alternate deposition of cubic TiN and CoPt effectively improves the crystallinity and (001) preferred orientation of CoPt layers. This effect is verified by the substantial enhancement of (001) reflection and PMA with increasing the period number of the multilayer films.

  2. Investigation of capacitance characteristics in metal/high-$k$ semiconductor devices at different parameters and with and without interface state density (traps)

    Indian Academy of Sciences (India)

    S HLALI; N HIZEM; A KALBOUSSI

    2017-09-01

    Capacitance vs. voltage ($C−V$) curves at AC high frequency of a metal–insulator–semiconductor (MIS) capacitorare investigated in this paper. Bi-dimensional simulations with Silvaco TCAD were carried out to study the effect ofoxide thickness, the surface of the structure, frequency, temperature and fixed charge in the oxide on the $C−V$ curves. We evaluate also the analysis of MIS capacitor structures by different substrate doping concentrations with and without interfacestate density at different temperatures (100, 300 and 600 K). These studies indicate that the doping substrate concentrationand the traps enormously affect the high-frequency $C−V$ curve behaviour. We also demonstrate that for low and hightemperatures, the high-frequency $C−V$ curves behaviour changes, indicating that the capacitance due to the substrate issignificantly influenced in these conditions (bias and substrate doping concentration).

  3. A Multi-Contact, Low Capacitance HPGe Detector for High Rate Gamma Spectroscopy

    Energy Technology Data Exchange (ETDEWEB)

    Cox, Christopher [XIA LLC, Hayward, CA (United States)

    2014-12-04

    The detection, identification and non-destructive assay of special nuclear materials and nuclear fission by-products are critically important activities in support of nuclear non-proliferation programs. Both national and international nuclear safeguard agencies recognize that current accounting methods for spent nuclear fuel are inadequate from a safeguards perspective. Radiation detection and analysis by gamma-ray spectroscopy is a key tool in this field, but no instrument exists that can deliver the required performance (energy resolution and detection sensitivity) in the presence of very high background count rates encountered in the nuclear safeguards arena. The work of this project addresses this critical need by developing a unique gamma-ray detector based on high purity germanium that has the previously unachievable property of operating in the 1 million counts-per-second range while achieving state-of-the-art energy resolution necessary to identify and analyze the isotopes of interest. The technical approach was to design and fabricate a germanium detector with multiple segmented electrodes coupled to multi-channel high rate spectroscopy electronics. Dividing the germanium detector’s signal electrode into smaller sections offers two advantages; firstly, the energy resolution of the detector is potentially improved, and secondly, the detector is able to operate at higher count rates. The design challenges included the following; determining the optimum electrode configuration to meet the stringent energy resolution and count rate requirements; determining the electronic noise (and therefore energy resolution) of the completed system after multiple signals are recombined; designing the germanium crystal housing and vacuum cryostat; and customizing electronics to perform the signal recombination function in real time. In this phase I work, commercial off-the-shelf electrostatic modeling software was used to develop the segmented germanium crystal geometry

  4. Fabricating of high-performance functional graphene fibers for micro-capacitive energy storage.

    Science.gov (United States)

    Fan, Tianju; Zhao, Chunyan; Xiao, Zhuangqing; Guo, Fangjun; Cai, Kaiyu; Lin, Hai; Liu, Yidong; Meng, Hong; Min, Yong; Epstein, Arthur J

    2016-07-08

    Although graphene is a typical two dimensional materials, it has converted to multi-dimensional materials with many unique properties. As an example, the one dimensional graphene fiber is fabricated by utilizing ionic liquid as coagulation and functional diamines as cross-linkers to connect graphene oxide layers. The fibers show excellent mechanical properties and superior electrical performance. The tensile strength of the resultant fibers reaches ~729 MPa after a super high temperature thermal annealing treatment at 2800 °C. Additionally, quasi-solid-state flexible micro-capacitors are fabricated with promising result on energy storage. The device show a specific volumetric capacity as high as ~225 F/cm(3) (measured at 103.5 mA cm(-3) in a three-electrode cell), as well as a long cycle life of 2000 times. The initial results indicate that these fibers will be a good candidate to replace energy storage devices for miniaturized portable electronic applications.

  5. TiC/NiO Core/Shell Nanoarchitecture with Battery-Capacitive Synchronous Lithium Storage for High-Performance Lithium-Ion Battery.

    Science.gov (United States)

    Huang, Hui; Feng, Tong; Gan, Yongping; Fang, Mingyu; Xia, Yang; Liang, Chu; Tao, Xinyong; Zhang, Wenkui

    2015-06-10

    The further development of electrode materials with high capacity and excellent rate capability presents a great challenge for advanced lithium-ion batteries. Herein, we demonstrate a battery-capacitive synchronous lithium storage mechanism based on a scrupulous design of TiC/NiO core/shell nanoarchitecture, in which the TiC nanowire core exhibits a typical double-layer capacitive behavior, and the NiO nanosheet shell acts as active materials for Li(+) storage. The as-constructed TiC/NiO (32 wt % NiO) core/shell nanoarchitecture offers high overall capacity and excellent cycling ability, retaining above 507.5 mAh g(-1) throughout 60 cycles at a current density of 200 mA g(-1) (much higher than theoretical value of the TiC/NiO composite). Most importantly, the high rate capability is far superior to that of NiO or other metal oxide electrode materials, owing to its double-layer capacitive characteristics of TiC nanowire and intrinsic high electrical conductivity for facile electron transport during Li(+) storage process. Our work offers a promising approach via a rational hybridization of two electrochemical energy storage materials for harvesting high capacity and good rate performance.

  6. Micromagnetic study of high-power spin–torque oscillator with perpendicular magnetization in half-metallic Heusler alloy spin valve nanopillar under external magnetic fields

    Energy Technology Data Exchange (ETDEWEB)

    Huang, H.B., E-mail: houbinghuang@gmail.com [Department of Physics, University of Science and Technology Beijing, Beijing 100083 (China); Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States); Ma, X.Q.; Zhao, C.P.; Liu, Z.H. [Department of Physics, University of Science and Technology Beijing, Beijing 100083 (China); Chen, L.Q. [Department of Materials Science and Engineering, The Pennsylvania State University, University Park, PA 16802 (United States)

    2015-01-01

    We investigated the high-power spin–torque oscillator in a half-metallic Heusler alloy Co{sub 2}MnSi spin-valve nanopillars with perpendicular magnetization under external magnetic field using micromagnetic simulations. Our simulations show that the narrow optimum current of magnetization precession in the Heusler-based spin valve is broadened by introducing the surface anisotropy. The linear decrease of frequency with the out-of-plane magnetic field is obtained in our simulation. Additionally, the in-plane magnetic field dependence of frequency shows a parabolic curve which is explained by the magnetization trajectory tilting. Furthermore, we also discussed the decrease of output power using the excitation of non-uniform magnetization precession in the in-plane magnetic fields. - Highlights: • We investigated spin–torque oscillator in Co{sub 2}MnSi spin-valve under magnetic fields. • The narrow optimum current is broadened by introducing the surface anisotropy. • The frequency dependences of out-of-plane and in-plane magnetic fields show linear and parabola. • The results may give the guidance for designing Heusler-based spin–torque oscillator.

  7. High thermal stability in W/MgO/CoFeB/W/CoFeB/W stacks via ultrathin W insertion with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Liu, Yi; Yu, Tao [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing 100191 (China); Zhu, Zhengyong; Zhong, Huicai [Institute of Microelectronics, Chinese Academy of Sciences, Beijing 100029 (China); Khamis, Khamis Masoud [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing 100191 (China); Zhu, Kaigui, E-mail: kgzhu@buaa.edu.cn [School of Physics and Nuclear Energy Engineering, Beihang University, Beijing 100191 (China); Key Laboratory of Micro-Nano Measurement-Manipulation and Physics, Ministry of Education, Beihang University, Beijing 100191 (China)

    2016-07-15

    The perpendicular magnetic anisotropy (PMA) of a series of top MgO/CoFeB/W stacks were studied. In these stacks, the thickness of CoFeB is limited in a range of 1.1–2.2 nm. It was found that the stack can still maintain PMA in a 1.9 nm thick CoFeB free layer. Besides, we investigated the thermal stability factor ∆ of a spin transfer torque magnetic random access memory (STT-MRAM) by inserting an ultra-thin W film of 0.8 nm between two CoFeB films. The result shows a clear PMA behavior for the samples with CoFeB thickness up to 2.5 nm, and an in-plane magnetic anisotropy (IMA) when the CoFeB is thicker than 2.5 nm. Moreover, the thermal stability factor ∆ of the CoFeB stack with W insertion is about 132 for a 50 nm size STT-MRAM device, which is remarkably improved compared to 112 for a sample without W insertion. Our results represent an alternative way to realize the endurance at high annealing temperature, high-density and high ∆ in STT-MRAM device by ultra-thin W insertion. - Highlights: • The MgO/CoFeB/W multilayer can still maintain PMA in a CoFeB thickness of 1.9 nm. • The sample with 2.5 nm thickness of CoFeB by W insertion can still maintain PMA. • The sample with W insertion can still maintain PMA until the annealing temperature as high as 350 °C. • The thermal stability factor ∆ of sample with W insertion could be increase to about 132 for a 50 nm size STT-MRAM device.

  8. A physical model of a CMOS varactor with high capacitance tuning range and its application to simulate integrated VCOs

    Science.gov (United States)

    Maget, Judith; Kraus, Rainer; Tiebout, Marc

    2002-10-01

    A physical model of a novel MOS varactor design is presented. The voltage and frequency dependent results for the varactors small-signal capacitance and resistance agree well with measured values for different device geometries. The model is further tested through simulating a fully integrated voltage controlled oscillator (VCO) for UMTS applications. Measured frequency tuning and phase noise of the VCO are accurately reproduced.

  9. High-Performance Capacitive Deionization Disinfection of Water with Graphene Oxide-graft-Quaternized Chitosan Nanohybrid Electrode Coating.

    Science.gov (United States)

    Wang, Yilei; El-Deen, Ahmed G; Li, Peng; Oh, Bernice H L; Guo, Zanru; Khin, Mya Mya; Vikhe, Yogesh S; Wang, Jing; Hu, Rebecca G; Boom, Remko M; Kline, Kimberly A; Becker, David L; Duan, Hongwei; Chan-Park, Mary B

    2015-10-27

    Water disinfection materials should ideally be broad-spectrum-active, nonleachable, and noncontaminating to the liquid needing sterilization. Herein, we demonstrate a high-performance capacitive deionization disinfection (CDID) electrode made by coating an activated carbon (AC) electrode with cationic nanohybrids of graphene oxide-graft-quaternized chitosan (GO-QC). Our GO-QC/AC CDID electrode can achieve at least 99.9999% killing (i.e., 6 log reduction) of Escherichia coli in water flowing continuously through the CDID cell. Without the GO-QC coating, the AC electrode alone cannot kill the bacteria and adsorbs a much smaller fraction (<82.8 ± 1.8%) of E. coli from the same biocontaminated water. Our CDID process consists of alternating cycles of water disinfection followed by electrode regeneration, each a few minutes duration, so that this water disinfection process can be continuous and it only needs a small electrode voltage (2 V). With a typical brackish water biocontamination (with 10(4) CFU mL(-1) bacteria), the GO-QC/AC electrodes can kill 99.99% of the E. coli in water for 5 h. The disinfecting GO-QC is securely attached on the AC electrode surface, so that it is noncontaminating to water, unlike many other chemicals used today. The GO-QC nanohybrids have excellent intrinsic antimicrobial properties in suspension form. Further, the GO component contributes toward the needed surface conductivity of the CDID electrode. This CDID process offers an economical method toward ultrafast, contaminant-free, and continuous killing of bacteria in biocontaminated water. The proposed strategy introduces a green in situ disinfectant approach for water purification.

  10. Capacitance Measurement Methods for Integrated Sensor Applications

    Directory of Open Access Journals (Sweden)

    Alireza Hassanzadeh

    2013-09-01

    Full Text Available In this paper different measurement methods that have been used for integrated capacitance measurement are reviewed and their advantage and disadvantages are discussed. For the designers of high accuracy on chip integrated circuits for capacitive sensors, it is important to know which method will provide the best approach for high accuracy, small chip area and power consumption especially for array sensors. These methods include on chip capacitive sensor and transducer measurement techniques that have been implemented for low value capacitance evaluations using CMOS technology. After the best structure is known the designer can optimize the chip for specific application. Voltage mode and current mode, linear and switched mode techniques are reviewed and a useful comparison table comparing all figures of merit including accuracy, range of measurement, chip area, speed and complexity is provided. The provided comparison table can be used as a reference for analog designers in the design of high accuracy integrated capacitive sensor interface

  11. Supercapacitor electrode with a homogeneously Co3O4-coated multiwalled carbon nanotube for a high capacitance.

    Science.gov (United States)

    Tao, Li; Shengjun, Li; Bowen, Zhang; Bei, Wang; Dayong, Nie; Zeng, Chen; Ying, Yan; Ning, Wan; Weifeng, Zhang

    2015-01-01

    Cobalt oxide (Co3O4) was homogeneously coated on multiwalled carbon nanotube through a simple chemical deposition method and employed in supercapacitor electrodes. SEM image indicated the uniform distribution of Co3O4 nanoparticles on the surface of the multiwalled carbon nanotube. A maximum specific capacitance of 273 Fg(-1) was obtained at the charge-discharge current density of 0.5 Ag(-1). After 500 cycles of continuous charge-discharge process, about 88% of the initial capacity could be retained.

  12. Investigation on a Novel Capacitive Electrode for Geophysical Surveys

    Directory of Open Access Journals (Sweden)

    Zhiyu Wang

    2016-01-01

    Full Text Available Nonpolarizable electrodes are applied widely in the electric field measurement for geophysical surveys. However, there are two major problems: (1 systematic errors caused by poor electrical contact in the high resistive terrains and (2 environmental damage associated with using nonpolarizable electrodes. A new alternative structure of capacitive electrode, which is capable of sensing surface potential through weak capacitive coupling, is presented to solve the above problems. A technique is introduced to neutralize distributed capacitance and input capacitance of the detection circuit. With the capacitance neutralization technique, the transmission coefficient of capacitive electrode remains stable when environmental conditions change. The simulation and field test results indicate that the new capacitive electrode has an operating bandwidth range from 0.1 Hz to 1 kHz. The capacitive electrodes have a good prospect of the applications in geophysical prospecting, especially in resistive terrains.

  13. The Implementation Of Solid State Switches In A Parallel Configuration To Gain Output Current Capacity In A High Current Capacitive Discharge Unit (CDU).

    Energy Technology Data Exchange (ETDEWEB)

    Chaves, Mario Paul [Univ. of New Mexico, Albuquerque, NM (United States)

    2017-07-01

    For my project I have selected to research and design a high current pulse system, which will be externally triggered from a 5V pulse. The research will be conducted in the region of paralleling the solid state switches for a higher current output, as well as to see if there will be any other advantages in doing so. The end use of the paralleled solid state switches will be used on a Capacitive Discharge Unit (CDU). For the first part of my project, I have set my focus on the design of the circuit, selection of components, and simulation of the circuit.

  14. Development and characterization of high temperature, high energy density dielectric materials to establish routes towards power electronics capacitive devices

    Science.gov (United States)

    Shay, Dennis P.

    The maximum electrostatic energy density of a capacitor is a function of the relative permittivity (epsilonr) and the square of the dielectric breakdown strength (Eb). Currently, state-of-the art high temperature (>200 °C), SiC-based power electronics utilize CaZrO3-rich NP0/C0G-type capacitors, which have low relative permittivities of epsilonr ˜ 30-40, high breakdown strengths (> 1.0 MV/cm), and are chosen for their minimal change in energy storage with temperature. However, with operating temperatures exceeding the rated temperatures for such capacitors, there is an opportunity to develop new dielectric ceramics having higher energy densities and volumetric efficiencies at high temperatures (>200 °C) by utilizing higher permittivity dielectrics while maintaining high breakdown strengths via doping. The solid solution behavior of was characterized in order to determine the optimal composition for balancing permittivity and dielectric breakdown strength to obtain high energy densities at elevated temperatures. Characterization by X-ray diffraction (XRD) showed Vegard's law behavior across the solid solution with minimal 2nd phases. To determine a Ca(TixZr1-x)O3 composition that will also minimize electronic or band conduction, the optical properties of the Ca(TixZr1-x)O3 solid solution were investigated to identify a composition on the CaTiO3 - rich end of the solid solution with a large band gap. Both ultraviolet-visible diffuse reflectance spectroscopy (UV-Vis) and spectroscopic ellipsometry were utilized to determine the Ca(TixZr1-x)O3 band gaps and optical properties. The resistivity at 250 °C scaled with the band gap energy across the solid solution. Comparing the current-voltage (I--V) behavior at 250 °C for Ca(Tix-yMnyZr0.2)O3 (CTZ + Mn) where x = 0.7, 0.8, 0.9, and y = 0.005, it was found that the Ca(Ti 0.795Mn0.005Zr0.2)O3 composition showed the lowest current density and a decrease in current density of 5 orders of magnitude compared to the un

  15. Voltage Dependence of Supercapacitor Capacitance

    Directory of Open Access Journals (Sweden)

    Szewczyk Arkadiusz

    2016-09-01

    Full Text Available Electronic Double-Layer Capacitors (EDLC, called Supercapacitors (SC, are electronic devices that are capable to store a relatively high amount of energy in a small volume comparing to other types of capacitors. They are composed of an activated carbon layer and electrolyte solution. The charge is stored on electrodes, forming the Helmholtz layer, and in electrolyte. The capacitance of supercapacitor is voltage- dependent. We propose an experimental method, based on monitoring of charging and discharging a supercapacitor, which enables to evaluate the charge in an SC structure as well as the Capacitance-Voltage (C-V dependence. The measurement setup, method and experimental results of charging/discharging commercially available supercapacitors in various voltage and current conditions are presented. The total charge stored in an SC structure is proportional to the square of voltage at SC electrodes while the charge on electrodes increases linearly with the voltage on SC electrodes. The Helmholtz capacitance increases linearly with the voltage bias while a sublinear increase of total capacitance was found. The voltage on SC increases after the discharge of electrodes due to diffusion of charges from the electrolyte to the electrodes. We have found that the recovery voltage value is linearly proportional to the initial bias voltage value.

  16. High-Sensitivity and Low-Hysteresis Porous MIM-Type Capacitive Humidity Sensor Using Functional Polymer Mixed with TiO2 Microparticles

    Science.gov (United States)

    Liu, Ming-Qing; Wang, Cong; Kim, Nam-Young

    2017-01-01

    In this study, a high-sensitivity and low-hysteresis porous metal–insulator–metal-type capacitive humidity sensor is investigated using a functional polymer mixed with TiO2 microparticles. The humidity sensor consists of an optimally designed porous top electrode, a functional polymer humidity sensitive layer, a bottom electrode, and a glass substrate. The porous top electrode is designed to increase the contact area between the sensing layer and water vapor, leading to high sensitivity and quick response time. The functional polymer mixed with TiO2 microparticles shows excellent hysteresis under a wide humidity-sensing range with good long-term stability. The results show that as the relative humidity ranges from 10% RH to 90% RH, the proposed humidity sensor achieves a high sensitivity of 0.85 pF/% RH and a fast response time of less than 35 s. Furthermore, the sensor shows an ultra-low hysteresis of 0.95% RH at 60% RH, a good temperature dependence, and a stable capacitance value with a maximum of 0.17% RH drift during 120 h of continuous test. PMID:28157167

  17. Numerical and analytical models to investigate the AC high-frequency response of nanoelectrode/SAM/electrolyte capacitive sensing elements

    Science.gov (United States)

    Pittino, Federico; Selmi, Luca; Widdershoven, Frans

    2013-10-01

    We develop theoretical models and numerical simulators to accurately describe the AC signal response of nanoelectrodes to the presence of biomolecules, in order to aid the design of capacitive biosensors. In particular, we first develop an analytical model for the electrolyte response to AC signal stimulation, showing that it is possible to define an AC screening length as in the standard Debye-Hückel theory. We then develop a full-custom numerical simulator for a simple nanoelectrode system, where the AC part is solved in the small-signal approximation, coupled to the DC solution. We validate the solver using the analytical model, and then use it to understand the effect of a dielectric biomolecule on the biosensor admittance.

  18. A capacitive DAC with custom 3-D 1-fF MOM unit capacitors optimized for fast-settling routing in high speed SAR ADCs

    Science.gov (United States)

    Chixiao, Chen; Jixuan, Xiang; Huabin, Chen; Jun, Xu; Fan, Ye; Ning, Li; Junyan, Ren

    2015-05-01

    Asynchronous successive approximation register (SAR) analog-to-digital converters (ADC) feature high energy efficiency but medium performance. From the point of view of speed, the key bottleneck is the unit capacitor size. In this paper, a small size three-dimensional (3-D) metal—oxide—metal (MOM) capacitor is proposed. The unit capacitor has a capacitance of 1-fF. It shapes as an umbrella, which is designed for fast settling consideration. A comparison among the proposed capacitor with other 3-D MOM capacitors is also given in the paper. To demonstrate the effectiveness of the MOM capacitor, a 6-b capacitive DAC is implemented in TSMC 1P9M 65 nm LP CMOS technology. The DAC consumes a power dissipation of 0.16 mW at the rate of 100 MS/s, excluding a source-follower based output buffer. Static measurement result shows that INL is less than ±1 LSB and DNL is less than ±0.5 LSB. In addition, a 100 MS/s 9-bit SAR ADC with the proposed 3-D capacitor is simulated.

  19. High-Performance One-Body Core/Shell Nanowire Supercapacitor Enabled by Conformal Growth of Capacitive 2D WS2 Layers.

    Science.gov (United States)

    Choudhary, Nitin; Li, Chao; Chung, Hee-Suk; Moore, Julian; Thomas, Jayan; Jung, Yeonwoong

    2016-12-27

    Two-dimensional (2D) transition-metal dichalcogenides (TMDs) have emerged as promising capacitive materials for supercapacitor devices owing to their intrinsically layered structure and large surface areas. Hierarchically integrating 2D TMDs with other functional nanomaterials has recently been pursued to improve electrochemical performances; however, it often suffers from limited cyclic stabilities and capacitance losses due to the poor structural integrity at the interfaces of randomly assembled materials. Here, we report high-performance core/shell nanowire supercapacitors based on an array of one-dimensional (1D) nanowires seamlessly integrated with conformal 2D TMD layers. The 1D and 2D supercapacitor components possess "one-body" geometry with atomically sharp and structurally robust core/shell interfaces, as they were spontaneously converted from identical metal current collectors via sequential oxidation/sulfurization. These hybrid supercapacitors outperform previously developed any stand-alone 2D TMD-based supercapacitors; particularly, exhibiting an exceptional charge-discharge retention over 30,000 cycles owing to their structural robustness, suggesting great potential for unconventional energy storage technologies.

  20. Interpretation of transconductance dispersion in AlGaAs/InGaAs pseudomorphic high electron mobility transistor by capacitance deep level transient spectroscopy

    CERN Document Server

    Choi, K J; Yoo, H M; Lee, G Y

    1998-01-01

    The transconductance dispersion in AlGaAs/InGaAs PHEMT grown by MBE was interpreted by means of capacitance DLTS technique. When the gate bias was -0.2 V, the transconductance decreased at a very broad frequency range of 5.5 Hz -1.7x10 sup 4 Hz. However, when a positive bias was applied to the gate, the transconductance increased at a low frequency range and then decreased at a high frequency range. In the transconductance dispersion measurement as a function of temperature, the transition frequency shifted to higher frequency region with the increase in temperature. The emission energy for the change in the transition frequency was determined to be 0.394 eV from the temperature dependency of the transition frequency. In the capacitance DLTS measurements, we observed DX-center with thermal activation energy of 0.420 eV and two hole trap-like signals. The DX-center peak decreased as the filling pulse decreased from +0.6 V and disappeared at the bias of -0.1 V. Comparing the activation energy of DX-center in DL...

  1. Capacitive chemical sensor

    Science.gov (United States)

    Manginell, Ronald P; Moorman, Matthew W; Wheeler, David R

    2014-05-27

    A microfabricated capacitive chemical sensor can be used as an autonomous chemical sensor or as an analyte-sensitive chemical preconcentrator in a larger microanalytical system. The capacitive chemical sensor detects changes in sensing film dielectric properties, such as the dielectric constant, conductivity, or dimensionality. These changes result from the interaction of a target analyte with the sensing film. This capability provides a low-power, self-heating chemical sensor suitable for remote and unattended sensing applications. The capacitive chemical sensor also enables a smart, analyte-sensitive chemical preconcentrator. After sorption of the sample by the sensing film, the film can be rapidly heated to release the sample for further analysis. Therefore, the capacitive chemical sensor can optimize the sample collection time prior to release to enable the rapid and accurate analysis of analytes by a microanalytical system.

  2. Quantum Capacitance in Topological Insulators

    Science.gov (United States)

    Xiu, Faxian; Meyer, Nicholas; Kou, Xufeng; He, Liang; Lang, Murong; Wang, Yong; Yu, Xinxin; Fedorov, Alexei V.; Zou, Jin; Wang, Kang L.

    2012-01-01

    Topological insulators show unique properties resulting from massless, Dirac-like surface states that are protected by time-reversal symmetry. Theory predicts that the surface states exhibit a quantum spin Hall effect with counter-propagating electrons carrying opposite spins in the absence of an external magnetic field. However, to date, the revelation of these states through conventional transport measurements remains a significant challenge owing to the predominance of bulk carriers. Here, we report on an experimental observation of Shubnikov-de Haas oscillations in quantum capacitance measurements, which originate from topological helical states. Unlike the traditional transport approach, the quantum capacitance measurements are remarkably alleviated from bulk interference at high excitation frequencies, thus enabling a distinction between the surface and bulk. We also demonstrate easy access to the surface states at relatively high temperatures up to 60 K. Our approach may eventually facilitate an exciting exploration of exotic topological properties at room temperature. PMID:22993694

  3. Realization of high quality epitaxial current- perpendicular-to-plane giant magnetoresistive pseudo spin-valves on Si(001 wafer using NiAl buffer layer

    Directory of Open Access Journals (Sweden)

    Jiamin Chen

    2016-05-01

    Full Text Available In this letter, we report a NiAl buffer layer as a template for the integration of epitaxial current-perpendicular-plane-giant magnetoresistive (CPP-GMR devices on a Si(001 single crystalline substrate. By depositing NiAl on a Si wafer at an elevated temperature of 500 °C, a smooth and epitaxial B2-type NiAl(001 layer was obtained. The surface roughness was further improved by depositing Ag on the NiAl layer and applying subsequent annealing process. The epitaxial CPP-GMR devices grown on the buffered Si(001 substrate present a large magnetoresistive output comparable with that of the devices grown on an MgO(001 substrate, demonstrating the possibility of epitaxial spintronic devices with a NiAl templated Si wafer for practical applications.

  4. Enhanced annealing stability and perpendicular magnetic anisotropy in perpendicular magnetic tunnel junctions using W layer

    Science.gov (United States)

    Chatterjee, Jyotirmoy; Sousa, Ricardo C.; Perrissin, Nicolas; Auffret, Stéphane; Ducruet, Clarisse; Dieny, Bernard

    2017-05-01

    The magnetic properties of the perpendicular storage electrode (buffer/MgO/FeCoB/Cap) were studied as a function of annealing temperature by replacing Ta with W and W/Ta cap layers with variable thicknesses. W in the cap boosts up the annealing stability and increases the effective perpendicular anisotropy by 30% compared to the Ta cap. Correspondingly, an increase in the FeCoB critical thickness characterizing the transition from perpendicular to in-plane anisotropy was observed. Thicker W layer in the W(t)/Ta 1 nm cap layer makes the storage electrode highly robust against annealing up to 570 °C. The stiffening of the overall stack resulting from the W insertion due to its very high melting temperature seems to be the key mechanism behind the extremely high thermal robustness. The Gilbert damping constant of FeCoB with the W/Ta cap was found to be lower when compared with the Ta cap and stable with annealing. The evolution of the magnetic properties of bottom pinned perpendicular magnetic tunnel junctions (p-MTJ) stack with the W2/Ta1 nm cap layer shows back-end-of-line compatibility with increasing tunnel magnetoresistance up to the annealing temperature of 425 °C. The pMTJ thermal budget is limited by the synthetic antiferromagnetic hard layer which is stable up to 425 °C annealing temperature while the storage layer is stable up to 455 °C.

  5. Highly Sensitive Temperature Sensors Based on Fiber-Optic PWM and Capacitance Variation Using Thermochromic Sensing Membrane.

    Science.gov (United States)

    Khan, Md Rajibur Rahaman; Kang, Shin-Won

    2016-07-09

    In this paper, we propose a temperature/thermal sensor that contains a Rhodamine-B sensing membrane. We applied two different sensing methods, namely, fiber-optic pulse width modulation (PWM) and an interdigitated capacitor (IDC)-based temperature sensor to measure the temperature from 5 °C to 100 °C. To the best of our knowledge, the fiber-optic PWM-based temperature sensor is reported for the first time in this study. The proposed fiber-optic PWM temperature sensor has good sensing ability; its sensitivity is ~3.733 mV/°C. The designed temperature-sensing system offers stable sensing responses over a wide dynamic range, good reproducibility properties with a relative standard deviation (RSD) of ~0.021, and the capacity for a linear sensing response with a correlation coefficient of R² ≈ 0.992 over a wide sensing range. In our study, we also developed an IDC temperature sensor that is based on the capacitance variation principle as the IDC sensing element is heated. We compared the performance of the proposed temperature-sensing systems with different fiber-optic temperature sensors (which are based on the fiber-optic wavelength shift method, the long grating fiber-optic Sagnac loop, and probe type fiber-optics) in terms of sensitivity, dynamic range, and linearity. We observed that the proposed sensing systems have better sensing performance than the above-mentioned sensing system.

  6. Electrical-Discharge Machining Of Perpendicular Passages

    Science.gov (United States)

    Malinzak, R. Michael; Booth, Gary N.

    1996-01-01

    Perpendicular telescoping electrode used to perform electrical-discharge machining (EDM) of internal passage through previously inaccessible depth of metal workpiece. More specifically, used to make internal passage perpendicular to passage entering from outer surface.

  7. Large negative thermal expansion of the Co subnetwork measured by EXAFS in highly disordered Nd₁-xCox thin films with perpendicular magnetic anisotropy.

    Science.gov (United States)

    Díaz, J; Cid, R; Hierro, A; M Álvarez-Prado, L; Quirós, C; Alameda, J M

    2013-10-23

    We have measured a negative thermal expansion (NTE) of the Co subnetwork in amorphous Nd1-xCox (0.78 < x < 0.84) thin films of the order of 1% in volume using linearly polarized EXAFS spectroscopy at RT and 10 K. The expansion, which is anisotropic, is uncorrelated with the perpendicular magnetic anisotropy (PMA) observed in all the films, but correlated with the method used to deposit them. The atomic environments of the Nd atoms resulted in such a strong disorder that Nd-Nd and Nd-Co environments were invisible to EXAFS, and only Co-Co atomic environments were detected. The information on the Nd subnetwork was obtained through its magnetic moment measured by XMCD. These measurements demonstrate an increasing interaction of neodymium atoms with their particular local crystal field as the temperature decreased, suggesting possible structural modifications at their sites. Since the magnetic moment of the cobalt subnetwork remains essentially constant with the temperature, it is proposed that its detected NTE may be caused by the mechanical response of the amorphous network to structural transformations at the Nd sites. These results support that the PMA in RE-TM alloys is localized at the RE sites. The complete absence of EXAFS oscillations in the Nd L3 EXAFS spectra is remarkable: it means that the coherence length of the photoemitted electrons in disordered matter can be strongly reduced from that expected by atomic calculations to the point of being less than first neighbor distances, which is contrary to the common belief that first neighbors are always visible by EXAFS.

  8. Drive integration challenges for perpendicular recording

    Energy Technology Data Exchange (ETDEWEB)

    Lambert, S.E.; Lairson, B.M.; Nguy, Hai; Nguyen, Linda; Huang, Ton; Adler, Jason; Gopalaswamy, Srini

    2001-10-01

    Integration of heads and media for perpendicular recording into disk drives will require new developments in several areas. This paper discusses the methods we use to characterize error rate and servo performance of perpendicular recording components, and highlights the impact of skew angle and external field on recording performance. We also report our first efforts to incorporate perpendicular components into disk drives.

  9. Steerable Capacitive Proximity Sensor

    Science.gov (United States)

    Jenstrom, Del T.; Mcconnell, Robert L.

    1994-01-01

    Steerable capacitive proximity sensor of "capaciflector" type based partly on sensing units described in GSC-13377 and GSC-13475. Position of maximum sensitivity adjusted without moving sensor. Voltage of each driven shield adjusted separately to concentrate sensing electric field more toward one side or other.

  10. Membrane capacitive deionization

    NARCIS (Netherlands)

    Biesheuvel, P.M.; Wal, van der A.

    2010-01-01

    Membrane capacitive deionization (MCDI) is an ion-removal process based on applying an electrical potential difference across an aqueous solution which flows in between oppositely placed porous electrodes, in front of which ion-exchange membranes are positioned. Due to the applied potential, ions ar

  11. Determination of active doping in highly resistive boron doped silicon nanocrystals embedded in SiO{sub 2} by capacitance voltage measurement on inverted metal oxide semiconductor structure

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Tian, E-mail: tianz@student.unsw.edu.au; Puthen-Veettil, Binesh; Wu, Lingfeng; Jia, Xuguang; Lin, Ziyun; Yang, Terry Chien-Jen; Conibeer, Gavin; Perez-Wurfl, Ivan [Australian Centre for Advanced Photovoltaics, UNSW Australia, Kensington, New South Wales 2052 (Australia)

    2015-10-21

    We investigate the Capacitance-Voltage (CV) measurement to study the electrically active boron doping in Si nanocrystals (ncSi) embedded in SiO{sub 2}. The ncSi thin films with high resistivity (200–400 Ω cm) can be measured by using an inverted metal oxide semiconductor (MOS) structure (Al/ncSi (B)/SiO{sub 2}/Si). This device structure eliminates the complications from the effects of lateral current flow and the high sheet resistance in standard lateral MOS structures. The characteristic MOS CV curves observed are consistent with the effective p-type doping. The CV modeling method is presented and used to evaluate the electrically active doping concentration. We find that the highly boron doped ncSi films have electrically active doping of 10{sup 18}–10{sup 19 }cm{sup −3} despite their high resistivity. The saturation of doping at about 1.4 × 10{sup 19 }cm{sup −3} and the low doping efficiency less than 5% are observed and discussed. The calculated effective mobility is in the order of 10{sup −3} cm{sup 2}/V s, indicating strong impurity/defect scattering effect that hinders carriers transport.

  12. Determination of active doping in highly resistive boron doped silicon nanocrystals embedded in SiO2 by capacitance voltage measurement on inverted metal oxide semiconductor structure

    Science.gov (United States)

    Zhang, Tian; Puthen-Veettil, Binesh; Wu, Lingfeng; Jia, Xuguang; Lin, Ziyun; Yang, Terry Chien-Jen; Conibeer, Gavin; Perez-Wurfl, Ivan

    2015-10-01

    We investigate the Capacitance-Voltage (CV) measurement to study the electrically active boron doping in Si nanocrystals (ncSi) embedded in SiO2. The ncSi thin films with high resistivity (200-400 Ω cm) can be measured by using an inverted metal oxide semiconductor (MOS) structure (Al/ncSi (B)/SiO2/Si). This device structure eliminates the complications from the effects of lateral current flow and the high sheet resistance in standard lateral MOS structures. The characteristic MOS CV curves observed are consistent with the effective p-type doping. The CV modeling method is presented and used to evaluate the electrically active doping concentration. We find that the highly boron doped ncSi films have electrically active doping of 1018-1019 cm-3 despite their high resistivity. The saturation of doping at about 1.4 × 1019 cm-3 and the low doping efficiency less than 5% are observed and discussed. The calculated effective mobility is in the order of 10-3 cm2/V s, indicating strong impurity/defect scattering effect that hinders carriers transport.

  13. Programmable differential capacitance-to-voltage converter for MEMS accelerometers

    Science.gov (United States)

    Royo, G.; Sánchez-Azqueta, C.; Gimeno, C.; Aldea, C.; Celma, S.

    2017-05-01

    Capacitive MEMS sensors exhibit an excellent noise performance, high sensitivity and low power consumption. They offer a huge range of applications, being the accelerometer one of its main uses. In this work, we present the design of a capacitance-to-voltage converter in CMOS technology to measure the acceleration from the capacitance variations. It is based on a low-power, fully-differential transimpedance amplifier with low input impedance and a very low input noise.

  14. Beating of magnetic oscillations in a graphene device probed by quantum capacitance

    KAUST Repository

    Tahir, M.

    2012-07-05

    We report the quantum capacitance of a monolayergraphene device in an external perpendicular magnetic field including the effects of Rashba spin-orbit interaction(SOI). The SOI mixes the spin up and spin down states of neighbouring Landau levels into two (unequally spaced) energy branches. In order to investigate the role of the SOI for the electronic transport, we study the density of states to probe the quantum capacitance of monolayergraphene.SOIeffects on the quantum magnetic oscillations (Shubnikov de Haas and de Hass-van Alphen) are deduced from the quantum capacitance.

  15. Nanocrystalline-diamond thin films with high pH and penicillin sensitivity prepared on a capacitive Si-SiO{sub 2} structure

    Energy Technology Data Exchange (ETDEWEB)

    Poghossian, A. [Institute of Nano- and Biotechnologies (INB), Aachen University of Applied Sciences, Campus Juelich, Juelich (Germany); Institute of Bio- and Nanosystems (IBN-2), Research Centre Juelich GmbH, Juelich (Germany)], E-mail: a.poghossian@fz-juelich.de; Abouzar, M.H.; Razavi, A.; Baecker, M. [Institute of Nano- and Biotechnologies (INB), Aachen University of Applied Sciences, Campus Juelich, Juelich (Germany); Institute of Bio- and Nanosystems (IBN-2), Research Centre Juelich GmbH, Juelich (Germany); Bijnens, N. [Institute for Materials Research, Hasselt University, Diepenbeek (Belgium); Williams, O.A.; Haenen, K. [Institute for Materials Research, Hasselt University, Diepenbeek (Belgium); Division IMOMEC, IMEC vzw., Diepenbeek (Belgium); Moritz, W. [Humboldt University Berlin, Berlin (Germany); Wagner, P. [Institute for Materials Research, Hasselt University, Diepenbeek (Belgium); Schoening, M.J. [Institute of Nano- and Biotechnologies (INB), Aachen University of Applied Sciences, Campus Juelich, Juelich (Germany); Institute of Bio- and Nanosystems (IBN-2), Research Centre Juelich GmbH, Juelich (Germany)

    2009-10-30

    A capacitive field-effect EDIS (electrolyte-diamond-insulator-semiconductor) sensor with improved pH and penicillin sensitivity has been realised using a nanocrystalline-diamond (NCD) film as sensitive gate material. The NCD growth process on SiO{sub 2} as well as an additional surface treatment in oxidising medium have been optimised to provide high pH-sensitive, non-porous O-terminated films without damage of the underlying SiO{sub 2} layer. The surface morphology of O-terminated NCD thin films and the layer structure of EDIS sensors have been studied by scanning electron microscopy (SEM) and transmission electron microscopy (TEM) methods. To establish the relative coverage of the surface functional groups generated by the oxidation of NCD surfaces, X-ray photoelectron spectroscopy analysis was carried out. The hydrophilicity of NCD thin films has been studied by water contact-angle measurements. A nearly Nernstian pH sensitivity of 54-57 mV/pH has been observed for O-terminated NCD films treated in an oxidising boiling mixture for 80 min and in oxygen plasma. The high pH-sensitive properties of O-terminated NCD have been used to develop an EDIS-based penicillin biosensor. A freshly prepared penicillin biosensor possesses a high sensitivity of 85 mV/decade in the concentration range of 0.1-2.5 mM penicillin G. The lower detection limit is 5 {mu}M.

  16. Stray Capacitances of an Air-Cored Eddy Current Sensor

    Directory of Open Access Journals (Sweden)

    Yi Jia

    2009-12-01

    Full Text Available Stray capacitance of an air-cored eddy current sensor is one of the most crucial issues for successful development of an eddy current based residual stress assessment technology at frequency above 50 MHz. A two dimensional finite element model and an equivalent lumped capacitance network have been developed to accurately quantify overall stray capacitances of an air-cored eddy current sensor with specimen being tested. A baseline model was used to evaluate sensor design parameters, including the effects of pitch distance, trace width, trace thickness, number of turns, inner diameter, substrate thickness, lift-off distance, and dielectric constant of shim on the stray capacitances of the sensor. The results clearly indicate that an appropriate sensor design parameters could reduce the stray capacitance and improve the sensor performance. This research opens up a new design space to minimize stray capacitance effect and improve the sensor sensitivity and its lift-off uncertainty at elevated high frequencies.

  17. Dual Cryogenic Capacitive Density Sensor

    Science.gov (United States)

    Youngquist, Robert; Mata, Carlos; Vokrot, Peter; Cox, Robert

    2009-01-01

    A dual cryogenic capacitive density sensor has been developed. The device contains capacitive sensors that monitor two-phase cryogenic flow density to within 1% accuracy, which, if temperature were known, could be used to determine the ratio of liquid to gas in the line. Two of these density sensors, located a known distance apart, comprise the sensor, providing some information on the velocity of the flow. This sensor was constructed as a proposed mass flowmeter with high data acquisition rates. Without moving parts, this device is capable of detecting the density change within a two-phase cryogenic flow more than 100 times a second. Detection is enabled by a series of two sets of five parallel plates with stainless steel, cryogenically rated tubing. The parallel plates form the two capacitive sensors, which are measured by electrically isolated digital electronics. These capacitors monitor the dielectric of the flow essentially the density of the flow and can be used to determine (along with temperature) the ratio of cryogenic liquid to gas. Combining this information with the velocity of the flow can, with care, be used to approximate the total two-phase mass flow. The sensor can be operated at moderately high pressures and can be lowered into a cryogenic bath. The electronics have been substantially improved over the older sensors, incorporating a better microprocessor, elaborate ground loop protection and noise limiting circuitry, and reduced temperature sensitivity. At the time of this writing, this design has been bench tested at room temperature, but actual cryogenic tests are pending

  18. Induced Charge Capacitive Deionization

    CERN Document Server

    Rubin, S; Biesheuvel, P M; Bercovici, M

    2016-01-01

    We demonstrate the phenomenon of induced-charge capacitive deionization (ICCDI) that occurs around a porous and conducting particle immersed in an electrolyte, under the action of an external electrostatic field. The external electric field induces an electric dipole in the porous particle, leading to capacitive charging of its volume by both cations and anions at opposite poles. This regime is characterized both by a large RC charging time and a small electrochemical charge relaxation time, which leads to rapid and significant deionization of ionic species from a volume which is on the scale of the particle. We show by theory and experiment that the transient response around a cylindrical particle results in spatially non-uniform charging and non-steady growth of depletion regions which emerge around the particle's poles. Potentially, ICCDI can be useful in applications where fast concentration changes of ionic species are required over large volumes.

  19. MOS Capacitance-Voltage Characteristics:V.Methods to Enhance the Trapping Capacitance

    Institute of Scientific and Technical Information of China (English)

    揭斌斌; 薩支唐

    2012-01-01

    Low-frequency and High-frequency Capacitance-Voltage (C-V) curves of Silicon Metal-Oxide-Semiconductor Capacitors,showing electron and hole trapping at shallow-level dopant and deep-level generationrecombination-trapping impurities,are presented to illustrate the enhancement of the giant trapping capacitances by physical means via device and circuit designs,in contrast to chemical means via impurity characteristics previously reported.Enhancement is realized by masking the electron or/and hole storage capacitances to make the trapping capacitances dominant at the terminals.Device and materials properties used in the computed CV curves are selected to illustrate experimental realizations for fundamental trapping parameter characterizations and for electrical and optical signal processing applications.

  20. A Two-Ply Polymer-Based Flexible Tactile Sensor Sheet Using Electric Capacitance

    Directory of Open Access Journals (Sweden)

    Shijie Guo

    2014-01-01

    Full Text Available Traditional capacitive tactile sensor sheets usually have a three-layered structure, with a dielectric layer sandwiched by two electrode layers. Each electrode layer has a number of parallel ribbon-like electrodes. The electrodes on the two electrode layers are oriented orthogonally and each crossing point of the two perpendicular electrode arrays makes up a capacitive sensor cell on the sheet. It is well known that compatibility between measuring precision and resolution is difficult, since decreasing the width of the electrodes is required to obtain a high resolution, however, this may lead to reduction of the area of the sensor cells, and as a result, lead to a low Signal/Noise (S/N ratio. To overcome this problem, a new multilayered structure and related calculation procedure are proposed. This new structure stacks two or more sensor sheets with shifts in position. Both a high precision and a high resolution can be obtained by combining the signals of the stacked sensor sheets. Trial production was made and the effect was confirmed.

  1. Experimental study of a very high frequency (162MHz) capacitively coupled multi-tile electrode plasma source

    Science.gov (United States)

    Sirse, Nishant; Ellingboe, Bert

    2015-09-01

    In the recent years, plasma discharges excited at very high frequency (30-500MHz) has attracted much attention due to its ability to perform etching and deposition of large area substrates. VHF discharges yield high plasma density and low electron temperature and enable enhanced plasma dissociation. However, the plasma chemistry and power coupling mechanism in VHF discharges is not fully understood. In this article, we present an experimental study on nitrogen plasma produced by a VHF (162 MHz) multi-tile electrode. Electron density profile and gas temperature (rotational and vibrational) are measured as a function of rf power (100-1500W) and gas pressure (50mTorr-1Torr). Tile centre and Tile edge data are presented to realize the power coupling mechanism at different position in the multi-tile electrode discharge. It is observed that the plasma density increases monotonically with a rise in VHF power level at both positions while decreasing with an increase in the operating gas pressure. At a low gas pressure (50mTorr), plasma density profile shows a maximum at the tile centre and minimum at the tile edge position, whereas, at high gas pressures (500mTorr - 1 Torr) edge effects are observed. Measured rotational temperature (~ 350-450 K) is slightly above room temperature. Vibrational temperature, measured from 6500-8000 K, is increasing initially with a rise in rf power (profile, high vibrational temperature is measured at the tile edge compared to the tile centre.

  2. Perpendicular ion acceleration in whistler turbulence

    Energy Technology Data Exchange (ETDEWEB)

    Saito, S. [Graduate School of Science, Nagoya University, Furocho, Chikusa, Nagoya 464-8601 (Japan); Nariyuki, Y. [Faculty of Human Development, University of Toyama, 3190, Toyama 930-8555 (Japan)

    2014-04-15

    Whistler turbulence is an important contributor to solar wind turbulence dissipation. This turbulence contains obliquely propagating whistler waves at electron scales, and these waves have electrostatic components perpendicular to the mean magnetic field. In this paper, a full kinetic, two-dimensional particle-in-cell simulation shows that whistler turbulence can accelerate ions in the direction perpendicular to the mean magnetic field. When the ions pass through wave-particle resonances region in the phase space during their cyclotron motion, the ions are effectively accelerated in the perpendicular direction. The simulation results suggest that whistler turbulence contributes to the perpendicular heating of ions observed in the solar wind.

  3. Capacitance sensor for automatic soil retreat measurements

    Institute of Scientific and Technical Information of China (English)

    GU Jun; YANG Juan; YIN Wu-liang; WANG Chao; WANG Hua-xiang; LIU Ze; CHENG Su-sen

    2008-01-01

    To continuously monitor the soil retreat due to erosion in field, provide valuable information about the erosion processes and overcome the disadvantages of inefficiency, high time-consumption and labor-intensity of existing methods, this paper describes a novel capacitance sensor for measuring the soil retreat. A capaci-tance sensor based probe is proposed, which can measure the depth of the soil around it automatically and the data can be recorded by a data logger. Experimental results in the lab verify its usefulness.

  4. Comparison of C-V measurement methods for RF-MEMS capacitive switches

    NARCIS (Netherlands)

    Wang, J; Salm, Cora; Schmitz, Jurriaan

    2013-01-01

    The applicability of several capacitance-voltage measurement methods is investigated for the on-wafer characterization of RF-MEMS capacitive switches. These devices combine few-picofarad capacitance with a high quality factor. The standard quasistatic and high-frequency measurements are employed, as

  5. A 2.4 GHz high-linearity low-phase-noise CMOS LC-VCO based on capacitance compensation

    Energy Technology Data Exchange (ETDEWEB)

    Li Zhenrong; Zhuang Yiqi; Li Bing; Jin Gang; Jin Zhao, E-mail: allen_lzr@126.co [Key Laboratory of the Ministry of Education for Wide Band-Gap Semiconductor Materials and Devices, School of Microelectronics, Xidian University, Xi' an 710071 (China)

    2010-07-15

    A 2.4 GHz high-linearity low-phase-noise cross-coupled CMOS LC voltage-controlled oscillator (VCO) is implemented in standard 0.18-{mu}m CMOS technology. An equalization structure for tuning sensitivity base on the three-stage distributed biased switched-varactor bank and the differential switched-capacitor bank is adopted to reduce the variations of the VCO gain, achieve high linearity, and optimize the phase-noise performance. Compared to the conventional VCO, the proposed VCO has more constant gain over the entire tuning range. The tuning range is about 18.7% from 2.23 to 2.69 GHz, and the phase noise is -95 dBc/Hz at 100-kHz offset and -117 dBc/Hz at 1-MHz offset from the carrier frequency of 2.42 GHz. The power dissipation is 2.1 mW from a 1.8 V power supply. The active area of this VCO is 500 x 810 {mu}m{sup 2}.

  6. Capacitance of circular patch resonator

    Energy Technology Data Exchange (ETDEWEB)

    Miano, G.; Verolino, L. [Dip. di Ingegneria Elettrica, Ist. Nazionale di Fisica Nucleare, Naples (Italy); Panariello, G. [Dip. di Ingegneria Elettronica, Naples (Italy); Vaccaro, V.G. [Ist. Nazionale di Fisica Nucleare, Naples (Italy). Dipt. di Scienze Fisiche

    1995-11-01

    In this paper the capacitance of the circular microstrip patch resonator is computed. It is shown that the electrostatic problem can be formulated as a system of dual integral equations, and the most interesting techniques of solutions of these systems are reviewed. Some useful approximated formulas for the capacitance are derived and plots of the capacitance are finally given in a wide range of dielectric constants.

  7. Capacitive label reader

    Science.gov (United States)

    Arlowe, H. Duane

    1985-01-01

    A capacitive label reader includes an outer ring transmitting portion, an inner ring transmitting portion, and a plurality of insulated receiving portions. A label is the mirror-image of the reader except that identifying portions corresponding to the receiving portions are insulated from only one of two coupling elements. Positive and negative pulses applied, respectively, to the two transmitting rings biased a CMOS shift register positively to either a 1 or 0 condition. The output of the CMOS may be read as an indication of the label.

  8. Effect of estrogens on boar sperm capacitation in vitro

    Directory of Open Access Journals (Sweden)

    Ded Lukas

    2010-07-01

    Full Text Available Abstract Background Mammalian sperm must undergo a series of controlled molecular processes in the female reproductive tract called capacitation before they are capable of penetrating and fertilizing the egg. Capacitation, as a complex biological process, is influenced by many molecular factors, among which steroidal hormone estrogens play their role. Estrogens, present in a high concentration in the female reproductive tract are generally considered as primarily female hormones. However, there is increasing evidence of their important impact on male reproductive parameters. The purpose of this study is to investigate the effect of three natural estrogens such as estrone (E1, 17beta-estradiol (E2 and estriol (E3 as well as the synthetical one, 17alpha-ethynylestradiol (EE2 on boar sperm capacitation in vitro. Methods Boar sperm were capacitated in vitro in presence of estrogens. Capacitation progress in control and experimental samples was analyzed by flow cytometry with the anti-acrosin monoclonal antibody (ACR.2 at selected times of incubation. Sperm samples were analyzed at 120 min of capacitation by CTC (chlortetracycline assay, immunocytochemistry and flow cytometry with anti-acrosin ACR.2 antibody. Furthermore, sperm samples and capacitating media were analyzed by immunocytochemistry, ELISA with the ACR.2 antibody, and the acrosin activity assay after induced acrosomal reaction (AR. Results Estrogens stimulate sperm capacitation of boar sperm collected from different individuals. The stimulatory effect depends on capacitation time and is highly influenced by differences in the response to estrogens such as E2 by individual animals. Individual estrogens have relatively same effect on capacitation progress. In the boar samples with high estrogen responsiveness, estrogens stimulate the capacitation progress in a concentration-dependent manner. Furthermore, estrogens significantly increase the number of acrosome-reacted sperm after zona

  9. High-temperature isothermal capacitance transient spectroscopy study on SiN deposition damages for low-Mg-doped p-GaN Schottky diodes

    Energy Technology Data Exchange (ETDEWEB)

    Shiojima, Kenji, E-mail: shiojima@u-fukui.ac.jp [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507 (Japan); Wakayama, Hisashi; Aoki, Toshichika [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507 (Japan); Kaneda, Naoki [Graduate School of Engineering, University of Fukui, 3-9-1 Bunkyo, Fukui 910-8507 (Japan); Research and Development Laboratory, Corporate Advanced Technology Group, Hitachi Cable Ltd., 3550 Kidamari, Tsuchiura, Ibaraki 300-0026 (Japan); Nomoto, Kazuki [Department of Electrical Engineering, University of Notre Dame, 228 Stinson Remick, Norte Dame, IN 46556 (United States); Mishima, Tomoyoshi [Research and Development Laboratory, Corporate Advanced Technology Group, Hitachi Cable Ltd., 3550 Kidamari, Tsuchiura, Ibaraki 300-0026 (Japan)

    2014-04-30

    Attempt to achieve a surface passivation of p-type GaN was conducted on low-Mg-doped p-GaN by employing SiN films depositions by an Ar-plasma-sputtering and a plasma-enhancement chemical vapor deposition. Process induced damages were then characterized by using a high-temperature isothermal capacitance transient spectroscopy. A large single peak, likely attributed to acceptor-type surface states, was detected in the as-grown samples. The energy level was measured to be 1.18 eV above the valence band edge, which is close to a Ga-vacancy (V{sub Ga}) reported elsewhere. It was suggested that a small portion of Ga atoms were missing from the surface, and a large density of V{sub Ga} were created in a few surface layers. The peak intensity was found to significantly decrease by the SiN depositions, irrespective of the deposition methods, and further decreases upon annealing at 800 °C. After the SiN deposition and the annealing, the peak intensity decreased: the pure Ga vacancies may transform into complex defects in the course of the SiN deposition and annealing. These results show that the present characterization method with the low-Mg-doped p-GaN Schottky contacts is effective and serves as sensitive characterization of the surface defects. - Highlights: • Process induced damages on a surface passivation of p-type GaN were characterized. • Acceptor-type single surface-states were detected at 1.18 eV from the valence band. • The peak intensity was found to significantly decrease by the SiN depositions.

  10. CoTaZr/Pd multilayer with perpendicular magnetic anisotropy

    Directory of Open Access Journals (Sweden)

    Yong Chang Lau

    2013-08-01

    Full Text Available We report a novel perpendicularly magnetized thin film [Co91.5Ta4.5Zr4/Pd]5 multilayer, which exhibits strong perpendicular magnetic anisotropy when grown on 5 nm of Pd and Ru seed layers. The Pd-seeded multilayer annealed at 300 °C shows an effective uniaxial anisotropy constant, Keff = 1.1 MJ m−3, with an anisotropy field as high as 1.6 T. The perpendicular anisotropy is sustained on annealing at 400 °C for 1 h. X-ray diffraction on multilayers with 30 repeats suggests that the use of amorphous CoTaZr reduces the stress of the stack, compared to [Co/Pd] multilayer.

  11. Tunable growth of perpendicular cobalt ferrite nanosheets on reduced graphene oxide for energy storage

    Science.gov (United States)

    Dong, Bitao; Li, Mingyan; Xiao, Chunhui; Ding, Dawei; Gao, Guoxin; Ding, Shujiang

    2017-02-01

    Ultrathin cobalt ferrite nanosheets have been successfully assembled on the surface of reduced graphene oxide (rGO) via only adjusting the volume ratio of ethanol and deionized (DI) water and a post calcination treatment. The perpendicular ultrathin cobalt ferrite nanosheets supported by rGO sheets (CoFe2O4 NSs@rGO) can be obtained when the volume ratio of ethanol and DI water is 10:30. Correspondingly, the hierarchical porous films covering the total rGO sheets will be formed nanosheets. When evaluated as the electrodes for lithium ion batteries (LIBs) and supercapacitors (SCs), the resultant CoFe2O4 NSs@rGO hybrids exhibit highly enhanced electrochemical performance. Even after 200 charge-discharge cycles at 400 mA g-1, the electrodes as the anode material for LIBs still exhibit a reversible discharge capacity of 835.6 mAh g-1. In addition, this electrode for SCs also exhibits specific capacitance of ca 1120 F g-1 after 3000 cycles. These superior results imply that CoFe2O4 NSs with novel hybrid structure of rGO could potentially lead to an excellent electrochemical performance for energy storage.

  12. Tunable growth of perpendicular cobalt ferrite nanosheets on reduced graphene oxide for energy storage.

    Science.gov (United States)

    Dong, Bitao; Li, Mingyan; Xiao, Chunhui; Ding, Dawei; Gao, Guoxin; Ding, Shujiang

    2017-02-03

    Ultrathin cobalt ferrite nanosheets have been successfully assembled on the surface of reduced graphene oxide (rGO) via only adjusting the volume ratio of ethanol and deionized (DI) water and a post calcination treatment. The perpendicular ultrathin cobalt ferrite nanosheets supported by rGO sheets (CoFe2O4 NSs@rGO) can be obtained when the volume ratio of ethanol and DI water is 10:30. Correspondingly, the hierarchical porous films covering the total rGO sheets will be formed nanosheets. When evaluated as the electrodes for lithium ion batteries (LIBs) and supercapacitors (SCs), the resultant CoFe2O4 NSs@rGO hybrids exhibit highly enhanced electrochemical performance. Even after 200 charge-discharge cycles at 400 mA g(-1), the electrodes as the anode material for LIBs still exhibit a reversible discharge capacity of 835.6 mAh g(-1). In addition, this electrode for SCs also exhibits specific capacitance of ca 1120 F g(-1) after 3000 cycles. These superior results imply that CoFe2O4 NSs with novel hybrid structure of rGO could potentially lead to an excellent electrochemical performance for energy storage.

  13. Optimal pricing of capacitated networks

    NARCIS (Netherlands)

    Grigoriev, Alexander; Loon, van Joyce; Sitters, René; Uetz, Marc

    2009-01-01

    We address the algorithmic complexity of a profit maximization problem in capacitated, undirected networks. We are asked to price a set of $m$ capacitated network links to serve a set of $n$ potential customers. Each customer is interested in purchasing a network connection that is specified by a si

  14. Capacitance Variation of Electrolyte-Gated Bilayer Graphene Based Transistors

    Directory of Open Access Journals (Sweden)

    Hediyeh Karimi

    2013-01-01

    Full Text Available Quantum capacitance of electrolyte-gated bilayer graphene field-effect transistors is investigated in this paper. Bilayer graphene has received huge attention due to the fact that an energy gap could be opened by chemical doping or by applying external perpendicular electric field. So, this extraordinary property can be exploited to use bilayer graphene as a channel in electrolyte-gated field-effect transistors. The quantum capacitance of bi-layer graphene with an equivalent circuit is presented, and also based on the analytical model a numerical solution is reported. We begin by modeling the DOS, followed by carrier concentration as a function V in degenerate and nondegenerate regimes. To further confirm this viewpoint, the presented analytical model is compared with experimental data, and acceptable agreement is reported.

  15. Efficiency of Capacitively Loaded Converters

    DEFF Research Database (Denmark)

    Andersen, Thomas; Huang, Lina; Andersen, Michael A. E.;

    2012-01-01

    This paper explores the characteristic of capacitance versus voltage for dielectric electro active polymer (DEAP) actuator, 2kV polypropylene film capacitor as well as 3kV X7R multi layer ceramic capacitor (MLCC) at the beginning. An energy efficiency for capacitively loaded converters...... is introduced as a definition of efficiency. The calculated and measured efficiency curves for charging DEAP actuator, polypropylene film capacitor and X7R MLCC are provided and compared. The attention has to be paid for the voltage dependent capacitive load, like X7R MLCC, when evaluating the charging...... polypropylene film capacitor can be the equivalent capacitive load. Because of the voltage dependent characteristic, X7R MLCC cannot be used to replace the DEAP actuator. However, this type of capacitor can be used to substitute the capacitive actuator with voltage dependent property at the development phase....

  16. Evaluation of levels of defect sites present in highly ordered pyrolytic graphite electrodes using capacitive and faradaic current components derived simultaneously from large-amplitude Fourier transformed ac voltammetric experiments.

    Science.gov (United States)

    Lee, Chong-Yong; Bond, Alan M

    2009-01-15

    The level of edge plane defect sites present in highly ordered pyrolytic graphite (HOPG) electrodes has been evaluated via analysis of dc, ac fundamental, and higher-order ac harmonics available from a single large-amplitude Fourier transformed (FT) ac voltammetric experiment. Deliberate introduction of a low level of edge plane defect was achieved by polishing, with a higher level being introduced via electrochemical pretreatment. Kinetics regimes associated with fast electron transfer on the edge plane defect sites and slow electron transfer on the basal plane surface are resolved under ac conditions when using the surface-sensitive [Fe(CN)(6)](3-/4-) redox probe. However, because of their insensitivity to slow electron transfer, higher-order ac faradaic harmonics almost exclusively detect only the much faster processes that emanate from edge plane defect sites. Thus, detection of fourth- and higher-order ac Faradaic harmonic components that are devoid of background capacitive current is possible at freshly cleaved HOPG in the region near the reversible potential for the [Fe(CN)(6)](3-/4-) process. Under these circumstances, dc cyclic voltammograms exhibit only reduction and oxidation peaks separated by more than 1 V. The fundamental ac harmonic provides detailed information on the capacitive current, which increases with the level of edge plane defect sites. Apparent charge transfer rate constants also can be derived from peak-to-peak separations obtained from the dc aperiodic component. Estimates of the percentage of edge plane defect sites based on ac higher harmonics, capacitance, and dc aperiodic component that are available from a single experiment have been compared. The edge plane defect levels deduced from capacitance (fundamental harmonic ac component) and higher harmonic Faradaic currents are considered to be more reliable than estimations based on apparent rate constants derived from the dc aperiodic component or conventional dc cyclic voltammogram.

  17. Development and Implementation of 3-D, High Speed Capacitance Tomography for Imaging Large-Scale, Cold-Flow Circulating Fluidized Bed

    Energy Technology Data Exchange (ETDEWEB)

    Marashdeh, Qussai [Tech4imaging LLC, Columbus, OH (United States)

    2013-02-01

    A detailed understanding of multiphase flow behavior inside a Circulating Fluidized Bed (CFB) requires a 3-D technique capable of visualizing the flow field in real-time. Electrical Capacitance Volume Tomography (ECVT) is a newly developed technique that can provide such measurements. The attractiveness of the technique is in its low profile sensors, fast imaging speed and scalability to different section sizes, low operating cost, and safety. Moreover, the flexibility of ECVT sensors enable them to be designed around virtually any geometry, rendering them suitable to be used for measurement of solid flows in exit regions of the CFB. Tech4Imaging LLC has worked under contract with the U.S. Department of Energy's National Energy Technology Laboratory (DOE NETL) to develop an ECVT system for cold flow visualization and install it on a 12 inch ID circulating fluidized bed. The objective of this project was to help advance multi-phase flow science through implementation of an ECVT system on a cold flow model at DOE NETL. This project has responded to multi-phase community and industry needs of developing a tool that can be used to develop flow models, validate computational fluid dynamics simulations, provide detailed real-time feedback of process variables, and provide a comprehensive understating of multi-phase flow behavior. In this project, a complete ECVT system was successfully developed after considering different potential electronics and sensor designs. The system was tested at various flow conditions and with different materials, yielding real-time images of flow interaction in a gas-solid flow system. The system was installed on a 12 inch ID CFB of the US Department of Energy, Morgantown Labs. Technical and economic assessment of Scale-up and Commercialization of ECVT was also conducted. Experiments conducted with larger sensors in conditions similar to industrial settings are very promising. ECVT has also the potential to be developed for imaging multi

  18. A core–shell structured nanocomposite of NiO with carbon nanotubes as positive electrode material of high capacitance for supercapacitors

    Energy Technology Data Exchange (ETDEWEB)

    Wen, Z.B., E-mail: zbwen@jxnu.edu.cn [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang 330022 (China); Yu, F. [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang 330022 (China); College of Energy, Nanjing Tech University, Nanjing 211816, Jiangsu Province (China); New Energy and Material Laboratory (NEML), Department of Chemistry & Shanghai Key Laboratory of Molecular Catalysis and Innovative Material, Fudan University, Shanghai 200433 (China); You, T.; Zhu, L. [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang 330022 (China); Zhang, L., E-mail: lzhang@jxnu.edu.cn [College of Chemistry and Chemical Engineering, Jiangxi Normal University, Nanchang 330022 (China); Wu, Y.P., E-mail: wuyp@fudan.edu.cn [College of Energy, Nanjing Tech University, Nanjing 211816, Jiangsu Province (China); New Energy and Material Laboratory (NEML), Department of Chemistry & Shanghai Key Laboratory of Molecular Catalysis and Innovative Material, Fudan University, Shanghai 200433 (China)

    2016-02-15

    Highlights: • A core–shell structured NiO@CNTs nanocomposite is synthesized by a simple hydrothermal method. • The CNTs core effectively improves the capacitance, rate and cycling performance of NiO. • A supercapacitor is assembled when activated carbon is used as the negative electrode. • The supercapacitor presents an energy density up to 52.6 Wh kg{sup −1}. - Abstract: A nanocomposite of carbon nanotubes coated with nickel oxide was prepared by a simple hydrothermal method. The structure, morphology and electrochemical performance of the nanocomposite were investigated by X-ray diffraction, scanning electron microscopy and transmission electron microscopy, electrochemical tests including cyclic voltammogram, galvanostatic charge–discharge and electrochemical impedance spectroscopy, respectively. It presents the highest specific capacitance of 1844 F g{sup −1} at 1 A g{sup −1} and 1145 F g{sup −1} at current density of 10 A g{sup −1} with 88.9% (at 1 A g{sup −1}) capacitance retention after 1000 cycles. The specific capacitance of the nanocomposite is almost double of that of the virginal NiO (972 F g{sup −1} at 1 A g{sup −1}). Its cycling behavior is also very good. When combined with activated carbon as the negative electrode, the energy density can be up to 52.6 Wh kg{sup −1}. Such good electrochemical behavior indicates that the nanocomposite is a promising electrode material for supercapacitors.

  19. High capacitive performance of flexible and binder-free graphene-polypyrrole composite membrane based on in situ reduction of graphene oxide and self-assembly

    Science.gov (United States)

    Zhang, Jintao; Chen, Peng; Oh, Bernice H. L.; Chan-Park, Mary B.

    2013-09-01

    Exploiting flexible and binder-free electrode materials is of importance for the fast development of smart supercapacitor devices. A simple and effective strategy is demonstrated to fabricate a flexible composite membrane of reduced graphene oxide and polypyrrole nanowire (RGO-PPy) via in situ reduction of graphene oxide and self-assembly. More importantly, the shape and thickness of the membrane can be reasonably controlled by varying either the concentration of GO and PPy nanowires or the filtration volume. By direct coupling of two membrane electrodes, symmetric supercapacitors can be fabricated without the use of a binder and conductive additive. The supercapacitor is able to offer large areal capacitance (175 mF cm-2) and excellent cycling stability (~93% capacitance retention after 5000 charge-discharge cycles), thanks to the synergic integration between RGO sheets and PPy nanowires and the unique self-assembled porous structure.Exploiting flexible and binder-free electrode materials is of importance for the fast development of smart supercapacitor devices. A simple and effective strategy is demonstrated to fabricate a flexible composite membrane of reduced graphene oxide and polypyrrole nanowire (RGO-PPy) via in situ reduction of graphene oxide and self-assembly. More importantly, the shape and thickness of the membrane can be reasonably controlled by varying either the concentration of GO and PPy nanowires or the filtration volume. By direct coupling of two membrane electrodes, symmetric supercapacitors can be fabricated without the use of a binder and conductive additive. The supercapacitor is able to offer large areal capacitance (175 mF cm-2) and excellent cycling stability (~93% capacitance retention after 5000 charge-discharge cycles), thanks to the synergic integration between RGO sheets and PPy nanowires and the unique self-assembled porous structure. Electronic supplementary information (ESI) available. See DOI: 10.1039/c3nr02381h

  20. A 2.5 mW 370 mV/pF high linearity stray-immune symmetrical readout circuit for capacitive sensors

    Science.gov (United States)

    Kaimin, Zhou; Ziqiang, Wang; Chun, Zhang; Zhihua, Wang

    2012-06-01

    A stray-insensitive symmetrical capacitance-to-voltage converter for capacitive sensors is presented. By introducing a reference branch, a symmetrical readout circuit is realized. The linear input range is increased, and the systematic offsets of two input op-amps are cancelled. The common-mode noise and even-order distortion are also rejected. A chopper stabilization technique is adopted to further reduce the offset and flicker noise of the op-amps, and a Verilog-A-based varactor is used to model the real variable sensing capacitor. Simulation results show that the output voltage of this proposed readout circuit responds correctly, while the under-test capacitance changes with a frequency of 1 kHz. A metal-insulator-metal capacitor array is designed on chip for measurement, and the measurement results show that this circuit achieves sensitivity of 370 mV/pF, linearity error below 1% and power consumption as low as 2.5 mW. This symmetrical readout circuit can respond to an FPGA controlled sensing capacitor array changed every 1 ms.

  1. A 2.5 mW 370 mV/pF high linearity stray-immune symmetrical readout circuit for capacitive sensors

    Institute of Scientific and Technical Information of China (English)

    Zhou Kaimin; Wang Ziqiang; Zhang Chun; Wang Zhihua

    2012-01-01

    A stray-insensitive symmetrical capacitance-to-voltage converter for capacitive sensors is presented.By introducing a reference branch,a symmetrical readout circuit is realized.The linear input range is increased,and the systematic offsets of two input op-amps are cancelled.The common-mode noise and even-order distortion are also rejected.A chopper stabilization technique is adopted to further reduce the offset and flicker noise of the op-amps,and a Verilog-A-based varaetor is used to model the real variable sensing capacitor.Simulation results show that the output voltage of this proposed readout circuit responds correctly,while the under-test capacitance changes with a frequency of 1 kHz.A metal-insulator-metal capacitor array is designed on chip for measurement,and the measurement results show that this circuit achieves sensitivity of 370 mV/pF,linearity error below 1% and power consumption as low as 2.5 mW.This symmetrical readout circuit can respond to an FPGA controlled sensing capacitor array changed every 1 ms.

  2. THERMAL DRIFT CHARACTERISTICS OF CAPACITIVE PRESSURE SENSORS

    OpenAIRE

    2016-01-01

    The capacitive pressure sensors based on silicon are characterized by their very high sensitivities and their low power consumption. Nevertheless, their thermal behavior remains more or less unpredictable because they can indicate very high thermal coefficients. The study of the thermal behavior of these sensors is essential to define the parameters that cause the output characteristics drift. In this study, we modeled the thermal behavior of this sensors, using Finite Element Analysis (FE...

  3. Winding Capacitance Dividing Method for Powerformer

    Institute of Scientific and Technical Information of China (English)

    TIAN Qing; LIN Xiang-ning; LI Jian-jian; TAO Yong-hong

    2008-01-01

    It presents a method which can equivalently arrange the capacitance distribution along with the winding ofthe generator on the terminal and neutral respectively in a reasonable partition, particularly for a type of high-voltagegraded insulated cable wound generator, Powerformer. The winding of the Powerformer adopts graded insulation,which leads to the various cable thicknesses in different portion of the winding, and thus, the uneven capacitancedistribution. The large capacitive currents and large transient outrush currents resulting from the cable consisting ofthe stator winding of Powerformer may cause problems to the generator differential protection. Most of literatures a-vailable in the field of compensated differential protection focus on the charging current compensation for long trans-mission line, instead of for generator. The authors give a method which can be used to compensate the capacitivecurrent wholly to improve the reliability of the differential protection of Powerformer. It is proved that the distribu-ted capacitance can be equivalent as the lump circuit with a capacitance partition coefficient p, and p is proved as aconstant no matter whether the generator experiences the normal operation, external phase(s) fault or internal phase(s) fault. The formula of the partition coefficient is provided and the corresponding equivalent circuit of the Power-former cable to calculate capacitance currents is given. An analysis programming resolving the minimum value of thecoefficient p is written in MATLAB 7. 0/m according to this formula, using the function fmincon() which can workin any type of constraint condition. The program always gets the same global minimum points under the different in-itial values condition which proves our point by mathematical test. With this new approach to winding capacitancedividing method, the protection scheme used for Powerformer can be validated and improved accordingly.

  4. A new desalination technique using capacitive deionization

    Science.gov (United States)

    Rostamy, Mohammad Sajjad; Khashechi, Morteza; Pipelzadeh, Ehsan; desalination Team

    2016-11-01

    Capacitive deionization (CDI) is an emerging energy efficient, low pressure and low capital intensive desalination process where ions are separated by a pure electrostatic force imposed by a small bias potential as low as 1 V That funded by an external Renewable (Solar) power supply to materials with high specific surface area. The main objective of this configuration is to separate the cation and anions on oppositely charged electrodes. Various electrode materials have been developed in the past, which have suffered from instability and lack of performance. Preliminary experimental results using carbon black, graphite powder, graphene ∖graphite ∖PTFE (Active ∖Conductive ∖binder), show that the graphene reduced via urea method is a suitable method to develop CDI electrode materials with capacitance as high as 52.2 mg/g for free standing graphene electrode. The focus of these studies has been mainly on developing electrodes with high specific surface area, high capacitance, excellent electronic conductivity and fast charge discharge cycles for desalination. Although some progress has been made, production of efficient and stable carbon based electrode materials for large scale desalination has not been fully realized.

  5. Quantum capacitance in topological insulators under strain in a tilted magnetic field

    KAUST Repository

    Tahir, M.

    2012-12-06

    Topological insulators exhibit unique properties due to surface states of massless Dirac fermions with conserved time reversal symmetry. We consider the quantum capacitance under strain in an external tilted magnetic field and demonstrate a minimum at the charge neutrality point due to splitting of the zeroth Landau level. We also find beating in the Shubnikov de Haas oscillations due to strain, which originate from the topological helical states. Varying the tilting angle from perpendicular to parallel washes out these oscillations with a strain induced gap at the charge neutrality point. Our results explain recent quantum capacitance and transport experiments.

  6. Capacitance-Power-Hysteresis Trilemma in Nanoporous Supercapacitors

    Directory of Open Access Journals (Sweden)

    Alpha A. Lee

    2016-06-01

    Full Text Available Nanoporous supercapacitors are an important player in the field of energy storage that fill the gap between dielectric capacitors and batteries. The key challenge in the development of supercapacitors is the perceived trade-off between capacitance and power delivery. Current efforts to boost the capacitance of nanoporous supercapacitors focus on reducing the pore size so that they can only accommodate a single layer of ions. However, this tight packing compromises the charging dynamics and hence power density. We show via an analytical theory and Monte Carlo simulations that charging is sensitively dependent on the affinity of ions to the pores, and that high capacitances can be obtained for ionophobic pores of widths significantly larger than the ion diameter. Our theory also predicts that charging can be hysteretic with a significant energy loss per cycle for intermediate ionophilicities. We use these observations to explore the parameter regimes in which a capacitance-power-hysteresis trilemma may be avoided.

  7. Circuit analysis and simulation of an ultrahigh-frequency capacitance sensor for scanning capacitance microscopy

    Science.gov (United States)

    Yang, Jing; Postula, A.; Bialkowski, M.

    2004-03-01

    Quantitative two-dimensional dopant profiling tools are urgently needed for nowadays semiconductor industry. Scanning Capacitance Microscopy (SCM) holds most promise to become such a tool. The key component of SCM is an ultra high frequency (UHF) capacitance sensor. The output of the sensor has been approximately regarded as dC/dV, the derivative of the capacitance between the SCM tip and the sample versus the applied bias voltage. The SCM dopant profiling involves extracting the dopant profile from the SCM signal using analytic or numerical simulation models of Metal-Oxide-Semiconductor physics. To achieve a quantitative SCM dopant profiling, the operational principle of the whole SCM measurement has to be well understood and correctly included in those models. Recently, experimental evidences show the SCM signal is dramatically affected by many SCM experimental factors, including the behavior of the UHF capacitance sensor. However, till now, very little research has been reported on the behavior of the sensor in SCM measurement of semiconductors. In this paper, we derive an analytic expression of the sensor output, a circuit simulation model of the sensor is established using Advanced Design System 2003, and the dependences of the sensor output on the SCM operational factors are simulated.

  8. Theoretical study of quantum capacitance and associated delay in armchair-edge graphene nanoribbons

    Science.gov (United States)

    Hassan, Asif; Hossain, Md. Faruque; Rana, Md. Sohel; Kouzani, Abbas Z.

    2015-09-01

    This work presents a comprehensive investigation of the quantum capacitance and the associated effects on the carrier transit delay in armchair-edge graphene nanoribbons (A-GNRs) based on semi-analytical method. We emphasize on the realistic analysis of bandgap with taking edge effects into account by means of modified tight binding (TB) model. The results show that the edge effects have significant influence in defining the bandgap which is a necessary input in the accurate analyses of capacitance. The quantum capacitance is discussed in both nondegenerate (low gate voltage) and degenerate (high gate voltage) regimes. We observe that the classical capacitance limits the total gate (external) capacitance in the degenerate regime, whereas, quantum capacitance limits the external gate capacitance in the nondegenerate regime. The influence of gate capacitances on the gate delay is studied extensively to demonstrate the optimization of switching time. Moreover, the high-field behavior of a GNR is studied in the degenerate and nondegenerate regimes. We find that a smaller intrinsic capacitance appears in the channel due to high velocity carrier, which limits the quantum capacitance and thus limit the gate delay. Such detail analysis of GNRs considering a realistic model would be useful for the optimized design of GNR-based nanoelectronic devices.

  9. ON-LINE MONITORING OF BIOMASS CONCENTRATION BASED ON A CAPACITANCE SENSOR: ASSESSING THE METHODOLOGY FOR DIFFERENT BACTERIA AND YEAST HIGH CELL DENSITY FED-BATCH CULTURES

    Directory of Open Access Journals (Sweden)

    A. C. L. Horta

    2015-12-01

    Full Text Available Abstract The performance of an in-situ capacitance sensor for on-line monitoring of biomass concentration was evaluated for some of the most important microorganisms in the biotechnology industry: Escherichia coli, Saccharomyces cerevisiae, Pichia pastoris and Bacillus megaterium. A total of 33 batch and fed-batch cultures were carried out in a bench-scale bioreactor and biomass formation trends were followed by dielectric measurements during the growth phase as well as the induction phase, for 5 recombinant E. coli strains. Permittivity measurements and viable cellular concentrations presented a linear correlation for all the studied conditions. In addition, the permittivity signal was further used for inference of the cellular growth rate. The estimated specific growth rates mirrored the main trends of the metabolic states of the different cells and they can be further used for setting-up control strategies in fed-batch cultures.

  10. Bioenergetics of Mammalian Sperm Capacitation

    Directory of Open Access Journals (Sweden)

    Alessandra Ferramosca

    2014-01-01

    Full Text Available After ejaculation, the mammalian male gamete must undergo the capacitation process, which is a prerequisite for egg fertilization. The bioenergetics of sperm capacitation is poorly understood despite its fundamental role in sustaining the biochemical and molecular events occurring during gamete activation. Glycolysis and mitochondrial oxidative phosphorylation (OXPHOS are the two major metabolic pathways producing ATP which is the primary source of energy for spermatozoa. Since recent data suggest that spermatozoa have the ability to use different metabolic substrates, the main aim of this work is to present a broad overview of the current knowledge on the energy-producing metabolic pathways operating inside sperm mitochondria during capacitation in different mammalian species. Metabolism of glucose and of other energetic substrates, such as pyruvate, lactate, and citrate, is critically analyzed. Such knowledge, besides its obvious importance for basic science, could eventually translate into the development of novel strategies for treatment of male infertility, artificial reproduction, and sperm selection methods.

  11. Unified capacitance modelling of MOSFETs

    Science.gov (United States)

    Johannessen, O. G.; Fjeldly, T. A.; Ytterdal, T.

    1994-01-01

    A unified physics based capacitance model for MOSFETs suitable for implementation in circuit simulators is presented. This model is based on the charge conserving, so-called Meyer-like approach proposed by Turchetti et al., and utilizes a unified charge control model to assure a continuous description of the MOSFET capacitances both above and below threshold. The capacitances associated with the model are comparable to those of the well-known BSIM model in the above-threshold regime, but it is more precise in the description of near-threshold and subthreshold behaviour. Moreover, the discontinuities at the transitions between the various regimes of operation are removed. The present modelling scheme was implemented in our circuit simulator AIM-Spice, and simulations of the dynamic behaviour of various demanding benchmark circuits clearly reveal its superiority over simulations using the simple Meyer model.

  12. Tuning giant anomalous Hall resistance ratio in perpendicular Hall balance

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, J. Y.; Yang, G. [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China); State Key Laboratory of Magnetism, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Wang, S. G., E-mail: sgwang@iphy.ac.cn, E-mail: ghyu@mater.ustb.edu.cn [State Key Laboratory of Magnetism, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Liu, J. L. [State Key Laboratory of Magnetism, Beijing National Laboratory for Condensed Matter Physics, Institute of Physics, Chinese Academy of Sciences, Beijing 100190 (China); Department of Physics, Beijing University of Aeronautics and Astronautics, Beijing 100191 (China); Wang, R. M. [Department of Physics, Beijing University of Aeronautics and Astronautics, Beijing 100191 (China); Amsellem, E.; Kohn, A. [Department of Materials Engineering, Ilse Katz Institute for Nanoscale Science and Technology, Ben-Gurion University of the Negev, Beer-Sheva 84105 (Israel); Yu, G. H., E-mail: sgwang@iphy.ac.cn, E-mail: ghyu@mater.ustb.edu.cn [Department of Materials Physics and Chemistry, University of Science and Technology Beijing, Beijing 100083 (China)

    2015-04-13

    Anomalous Hall effect at room temperature in perpendicular Hall balance with a core structure of [Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4} has been tuned by functional CoO layers, where [Pt/Co]{sub 4} multilayers exhibit perpendicular magnetic anisotropy. A giant Hall resistance ratio up to 69 900% and saturation Hall resistance (R{sub S}{sup P}) up to 2590 mΩ were obtained in CoO/[Pt/Co]{sub 4}/NiO/[Co/Pt]{sub 4}/CoO system, which is 302% and 146% larger than that in the structure without CoO layers, respectively. Transmission electron microscopy shows highly textured [Co/Pt]{sub 4} multilayers and oxide layers with local epitaxial relations, indicating that the crystallographic structure has significant influence on spin dependent transport properties.

  13. Theory of substrate, Zeeman, and electron-phonon interaction effects on the quantum capacitance in graphene

    KAUST Repository

    Tahir, M.

    2013-12-10

    Since the discovery of graphene, a lot of interest has been attracted by the zeroth Landau level, which has no analog in the conventional two dimensional electron gas. Recently, lifting of the spin and valley degeneracies has been confirmed experimentally by capacitance measurements, while in transport experiments, this is difficult due to the scattering in the device. In this context, we model interaction effects on the quantum capacitance of graphene in the presence of a perpendicular magnetic field, finding good agreement with experiments. We demonstrate that the valley degeneracy is lifted by the substrate and by Kekule distortion, whereas the spin degeneracy is lifted by Zeeman interaction. The two cases can be distinguished by capacitance measurements.

  14. Theory of substrate, Zeeman, and electron-phonon interaction effects on the quantum capacitance in graphene

    Energy Technology Data Exchange (ETDEWEB)

    Tahir, M. [PSE Division, KAUST, Thuwal 23955-6900 (Saudi Arabia); Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan); Sabeeh, K. [Department of Physics, Quaid-i-Azam University, Islamabad 45320 (Pakistan); Shaukat, A. [Department of Physics, University of Sargodha, Sargodha 40100 (Pakistan); Schwingenschlögl, U., E-mail: Udo.Schwingenschlogl@kaust.edu.sa [PSE Division, KAUST, Thuwal 23955-6900 (Saudi Arabia)

    2013-12-14

    Since the discovery of graphene, a lot of interest has been attracted by the zeroth Landau level, which has no analog in the conventional two dimensional electron gas. Recently, lifting of the spin and valley degeneracies has been confirmed experimentally by capacitance measurements, while in transport experiments, this is difficult due to the scattering in the device. In this context, we model interaction effects on the quantum capacitance of graphene in the presence of a perpendicular magnetic field, finding good agreement with experiments. We demonstrate that the valley degeneracy is lifted by the substrate and by Kekule distortion, whereas the spin degeneracy is lifted by Zeeman interaction. The two cases can be distinguished by capacitance measurements.

  15. Water desalination via capacitive deionization

    NARCIS (Netherlands)

    Suss, M.E.; Porada, S.; Sun, X.; Biesheuvel, P.M.; Yoon, J.; Presser, V.

    2015-01-01

    Capacitive deionization (CDI) is an emerging technology for the facile removal of charged ionic species from aqueous solutions, and is currently being widely explored for water desalination applications. The technology is based on ion electrosorption at the surface of a pair of electrically charg

  16. Water desalination via capacitive deionization

    NARCIS (Netherlands)

    Suss, M.E.; Porada, S.; Sun, X.; Biesheuvel, P.M.; Yoon, J.; Presser, V.

    2015-01-01

    Capacitive deionization (CDI) is an emerging technology for the facile removal of charged ionic species from aqueous solutions, and is currently being widely explored for water desalination applications. The technology is based on ion electrosorption at the surface of a pair of electrically charg

  17. Interfacial capacitance effects in magnetic tunneling junctions

    CERN Document Server

    Landry, G; Du, J; Xiao, J Q

    2001-01-01

    We have investigated the AC transport properties of magnetic tunnel junctions (MTJ) in order to characterize interfacial properties. One such property is interfacial charge accumulation, which leads to a voltage drop in the electrodes of the MTJ and the measured capacitance differing from the geometrical capacitance. Through measurement of capacitance spectra, we have extracted an interfacial capacitance of 16 mu F/cm sup 2 per interface and a screening length of 0.55 A for FeNi electrodes.

  18. Recent advances in understanding the capacitive storage in microporous carbons

    Energy Technology Data Exchange (ETDEWEB)

    Daffos, B.; Taberna, P.L. [Universite de Toulouse, CIRIMAT, UMR-CNRS 5085, Toulouse (France); Gogotsi, Y. [Department of Materials Science and Engineering, A.J. Drexel Nanotechnology Institute, Drexel University, Philadelphia, PA (United States); Simon, P.

    2010-10-15

    This paper presents a review of our recent work on capacitance of carbide-derived carbons (CDCs). Specific capacitance as high as 14 {mu}F cm{sup -2} or 160 F g{sup -1} was achieved using CDCs with tailored subnanometer pore size, which is significantly higher than 6 {mu}F cm{sup -2} or 100 F g{sup -1} for conventional activated carbons. Such high capacitance was obtained in several types of organic electrolytes with or without solvent. A maximum is obtained for the carbons with the mean pore size close to the bare ion size, ruling out the traditional point of view that mesoporosity is highly required for maximum capacitance. Surprisingly, carbons with subnanometer porosity exhibit high capacitance retention, since only a 10% loss is measured when 6 A g{sup -1} discharge is drawn. These findings show the importance of fitting the ion size with the mean pore size. The double layer theory falls short to explain such charge storage mechanisms at the nanometer scale; thus atomistic modelling is required to find out an alternative charge storage model. (Abstract Copyright [2010], Wiley Periodicals, Inc.)

  19. Perpendicular diffusion of a dilute beam of charged dust particles in a strongly coupled dusty plasma

    Science.gov (United States)

    Liu, Bin; Goree, J.

    2014-06-01

    The diffusion of projectiles drifting through a target of strongly coupled dusty plasma is investigated in a simulation. A projectile's drift is driven by a constant force F. We characterize the random walk of the projectiles in the direction perpendicular to their drift. The perpendicular diffusion coefficient Dp⊥ is obtained from the simulation data. The force dependence of Dp⊥ is found to be a power law in a high force regime, but a constant at low forces. A mean kinetic energy Wp for perpendicular motion is also obtained. The diffusion coefficient is found to increase with Wp with a linear trend at higher energies, but an exponential trend at lower energies.

  20. 废轮胎粉末在高频电容耦合等离子体反应器中的热解%Treatment of Waste Tyre Powder Using a High-frequency Capacitively Coupled Plasma Reactor

    Institute of Scientific and Technical Information of China (English)

    唐兰; 黄海涛

    2005-01-01

    A high-frequency (HF) capacitively coupled plasma reactor was developed to study the pyrolysis of waste tyre powder. The main objective was to generate a plasma at medium pressure and moderate temperatures for waste tyre powder gasification. Description of the reactor setup and experimental results concerning the plasma characteristics and product gas composition were presented, and potential use of the pyrolytic char was also discussed. Plasma temperatures were found to be between 1073 K to 1773 K, and under optimum operating conditions, over 70% of the tyre feed was converted into gaseous products by the treatment process. Pyrolysed gas was a mixture of H2, CO, CH4 and other organic compounds. The pyrolytic char may be used as low cost activated carbon for treating the species with large molecular weight.

  1. MOS Capacitance-Voltage Characteristics Ⅲ.Trapping Capacitance from 2-Charge-State Impurities

    Institute of Scientific and Technical Information of China (English)

    Jie Binbin; Sah Chihtang

    2011-01-01

    Low-frequency and high-frequency capacitance-voltage curves of Metal-Oxide-Semiconductor Capacitors are presented to illustrate giant electron and hole trapping capacitances at many simultaneously present two-charge-state and one-trapped-carrier,or one-energy-level impurity species.Models described include a donor electron trap and an acceptor hole trap,both donors,both acceptors,both shallow energy levels,both deep,one shallow and one deep,and the identical donor and acceptor.Device and material parameters are selected to simulate chemically and physically realizable capacitors for fundamental trapping parameter characterizations and for electrical and optical signal processing applications.

  2. Extraction method for parasitic capacitances and inductances of HEMT models

    Science.gov (United States)

    Zhang, HengShuang; Ma, PeiJun; Lu, Yang; Zhao, BoChao; Zheng, JiaXin; Ma, XiaoHua; Hao, Yue

    2017-03-01

    A new method to extract parasitic capacitances and inductances for high electron-mobility transistors (HEMTs) is proposed in this paper. Compared with the conventional extraction method, the depletion layer is modeled as a physically significant capacitance model and the extrinsic values obtained are much closer to the actual results. In order to simulate the high frequency behaviour with higher precision, series parasitic inductances are introduced into the cold pinch-off model which is used to extract capacitances at low frequency and the reactive elements can be determined simultaneously over the measured frequency range. The values obtained by this method can be used to establish a 16-elements small-signal equivalent circuit model under different bias conditions. The results show good agreements between the simulated and measured scattering parameters up to 30 GHz.

  3. CMOS MEMS capacitive absolute pressure sensor

    Science.gov (United States)

    Narducci, M.; Yu-Chia, L.; Fang, W.; Tsai, J.

    2013-05-01

    This paper presents the design, fabrication and characterization of a capacitive pressure sensor using a commercial 0.18 µm CMOS (complementary metal-oxide-semiconductor) process and postprocess. The pressure sensor is capacitive and the structure is formed by an Al top electrode enclosed in a suspended SiO2 membrane, which acts as a movable electrode against a bottom or stationary Al electrode fixed on the SiO2 substrate. Both the movable and fixed electrodes form a variable parallel plate capacitor, whose capacitance varies with the applied pressure on the surface. In order to release the membranes the CMOS layers need to be applied postprocess and this mainly consists of four steps: (1) deposition and patterning of PECVD (plasma-enhanced chemical vapor deposition) oxide to protect CMOS pads and to open the pressure sensor top surface, (2) etching of the sacrificial layer to release the suspended membrane, (3) deposition of PECVD oxide to seal the etching holes and creating vacuum inside the gap, and finally (4) etching of the passivation oxide to open the pads and allow electrical connections. This sensor design and fabrication is suitable to obey the design rules of a CMOS foundry and since it only uses low-temperature processes, it allows monolithic integration with other types of CMOS compatible sensors and IC (integrated circuit) interface on a single chip. Experimental results showed that the pressure sensor has a highly linear sensitivity of 0.14 fF kPa-1 in the pressure range of 0-300 kPa.

  4. Anomalous enhancement in interfacial perpendicular magnetic anisotropy through uphill diffusion.

    Science.gov (United States)

    Das, Tanmay; Kulkarni, Prabhanjan D; Purandare, S C; Barshilia, Harish C; Bhattacharyya, Somnath; Chowdhury, Prasanta

    2014-06-17

    We observed interfacial chemical sharpening due to uphill diffusion in post annealed ultrathin multilayer stack of Co and Pt, which leads to enhanced interfacial perpendicular magnetic anisotropy (PMA). This is surprising as these elements are considered as perfectly miscible. This chemical sharpening was confirmed through quantitative energy dispersive x-ray (EDX) spectroscopy and intensity distribution of images taken on high angle annular dark field (HAADF) detector in Scanning Transmission Electron Microscopic (STEM) mode. This observation demonstrates an evidence of miscibility gap in ultrathin coherent Co/Pt multilayer stacks.

  5. THERMAL DRIFT CHARACTERISTICS OF CAPACITIVE PRESSURE SENSORS

    Directory of Open Access Journals (Sweden)

    ABDELAZIZ BEDDIAF

    2016-03-01

    Full Text Available The capacitive pressure sensors based on silicon are characterized by their very high sensitivities and their low power consumption. Nevertheless, their thermal behavior remains more or less unpredictable because they can indicate very high thermal coefficients. The study of the thermal behavior of these sensors is essential to define the parameters that cause the output characteristics drift. In this study, we modeled the thermal behavior of this sensors, using Finite Element Analysis (FEA made in COMSOL. The model solved by COMSOL environment takes into account the entire sensor and thermal effects due to the temperature considering the materials’ properties, the geometric shape and also the heat transfer mechanisms. By COMSOL we determine how the temperature affects the sensor during the manufacturing process. For that end, we calculated the thermal drift of capacitance at rest, the thermal coefficients and we compared them with experimental results to validate our model. Further, we studied the thermal drift of sensor characteristics both at rest and under constant and uniform pressure. Further, our study put emphasis on the geometric influence parameters on these characteristics to optimize the sensor performance. Finally, this study allows us to predict the sensor behavior against temperature and to minimize this effect by optimizing the geometrical parameters.

  6. Perpendicular orientation of cylindrical domains upon solvent annealing thin films of polystyrene-b-polylactide

    Energy Technology Data Exchange (ETDEWEB)

    Vayer, Marylene [Centre de Recherche sur la Matiere Divisee, 1b rue de la Ferollerie, 45071 Orleans (France); Hillmyer, Marc A. [University of Minnesota, Department of Chemistry, Minneapolis, MN 55455-0431 (United States); Dirany, Mohammed; Thevenin, Guillaume; Erre, Rene [Centre de Recherche sur la Matiere Divisee, 1b rue de la Ferollerie, 45071 Orleans (France); Sinturel, Christophe, E-mail: christophe.sinturel@univ-orleans.f [Centre de Recherche sur la Matiere Divisee, 1b rue de la Ferollerie, 45071 Orleans (France)

    2010-05-03

    Polystyrene-b-polylactide (PS-PLA) was employed as a precursor to nanoporous thin films containing perpendicular cylindrical channels. Cylinder-forming PS-PLA was spin coated onto Si substrate and solvent annealed using acetone, chlorobenzene and tetrahydrofuran (THF) for different durations. By atomic force microscopy, three types of final morphology were observed at the free surface of the films (PLA surface layer, perpendicular cylinders and parallel cylinders) depending on the type of solvent and annealing time. Well-organized perpendicular domains were obtained by annealing in THF. From this oriented PS-PLA annealed thin films, a mild hydrolysis led to a highly ordered array of perpendicularly-oriented cylindrical nanopores arranged on a hexagonal lattice, rendering the resulting nanoporous mask useful for nanopattern transfer processes. The weak resistance of the film/substrate interface during PLA etching was overcome by UV light exposure prior hydrolysis.

  7. Redox regulation of mammalian sperm capacitation

    Directory of Open Access Journals (Sweden)

    Cristian O′Flaherty

    2015-01-01

    Full Text Available Capacitation is a series of morphological and metabolic changes necessary for the spermatozoon to achieve fertilizing ability. One of the earlier happenings during mammalian sperm capacitation is the production of reactive oxygen species (ROS that will trigger and regulate a series of events including protein phosphorylation, in a time-dependent fashion. The identity of the sperm oxidase responsible for the production of ROS involved in capacitation is still elusive, and several candidates are discussed in this review. Interestingly, ROS-induced ROS formation has been described during human sperm capacitation. Redox signaling during capacitation is associated with changes in thiol groups of proteins located on the plasma membrane and subcellular compartments of the spermatozoon. Both, oxidation of thiols forming disulfide bridges and the increase on thiol content are necessary to regulate different sperm proteins associated with capacitation. Reducing equivalents such as NADH and NADPH are necessary to support capacitation in many species including humans. Lactate dehydrogenase, glucose-6-phospohate dehydrogenase, and isocitrate dehydrogenase are responsible in supplying NAD (P H for sperm capacitation. Peroxiredoxins (PRDXs are newly described enzymes with antioxidant properties that can protect mammalian spermatozoa; however, they are also candidates for assuring the regulation of redox signaling required for sperm capacitation. The dysregulation of PRDXs and of enzymes needed for their reactivation such as thioredoxin/thioredoxin reductase system and glutathione-S-transferases impairs sperm motility, capacitation, and promotes DNA damage in spermatozoa leading to male infertility.

  8. Cosmic ray acceleration at perpendicular shocks in supernova remnants

    Energy Technology Data Exchange (ETDEWEB)

    Ferrand, Gilles; Danos, Rebecca J.; Shalchi, Andreas; Safi-Harb, Samar [Department of Physics and Astronomy, University of Manitoba, Winnipeg, MB, R3T 2N2 (Canada); Edmon, Paul [Harvard University, 60 Garden Street, Cambridge, MA 02138 (United States); Mendygral, Peter, E-mail: gferrand@physics.umanitoba.ca [School of Physics and Astronomy, University of Minnesota, Minneapolis, MN 55455 (United States)

    2014-09-10

    Supernova remnants (SNRs) are believed to accelerate particles up to high energies through the mechanism of diffusive shock acceleration (DSA). Except for direct plasma simulations, all modeling efforts must rely on a given form of the diffusion coefficient, a key parameter that embodies the interactions of energetic charged particles with magnetic turbulence. The so-called Bohm limit is commonly employed. In this paper, we revisit the question of acceleration at perpendicular shocks, by employing a realistic model of perpendicular diffusion. Our coefficient reduces to a power law in momentum for low momenta (of index α), but becomes independent of the particle momentum at high momenta (reaching a constant value κ{sub ∞} above some characteristic momentum p {sub c}). We first provide simple analytical expressions of the maximum momentum that can be reached at a given time with this coefficient. Then we perform time-dependent numerical simulations to investigate the shape of the particle distribution that can be obtained when the particle pressure back-reacts on the flow. We observe that for a given index α and injection level, the shock modifications are similar for different possible values of p {sub c}, whereas the particle spectra differ markedly. Of particular interest, low values of p {sub c} tend to remove the concavity once thought to be typical of non-linear DSA, and result in steep spectra, as required by recent high-energy observations of Galactic SNRs.

  9. Capacitance-voltage characteristics of GaAs ion-implanted structures

    Directory of Open Access Journals (Sweden)

    Privalov E. N.

    2008-08-01

    Full Text Available A noniterative numerical method is proposed to calculate the barrier capacitance of GaAs ion-implanted structures as a function of the Schottky barrier bias. The features of the low- and high-frequency capacitance-voltage characteristics of these structures which are due to the presence of deep traps are elucidated.

  10. Last-passage Monte Carlo algorithm for mutual capacitance.

    Science.gov (United States)

    Hwang, Chi-Ok; Given, James A

    2006-08-01

    We develop and test the last-passage diffusion algorithm, a charge-based Monte Carlo algorithm, for the mutual capacitance of a system of conductors. The first-passage algorithm is highly efficient because it is charge based and incorporates importance sampling; it averages over the properties of Brownian paths that initiate outside the conductor and terminate on its surface. However, this algorithm does not seem to generalize to mutual capacitance problems. The last-passage algorithm, in a sense, is the time reversal of the first-passage algorithm; it involves averages over particles that initiate on an absorbing surface, leave that surface, and diffuse away to infinity. To validate this algorithm, we calculate the mutual capacitance matrix of the circular-disk parallel-plate capacitor and compare with the known numerical results. Good agreement is obtained.

  11. Noise and mismatch optimization for capacitive MEMS readout

    Energy Technology Data Exchange (ETDEWEB)

    Zhang Chong; Wu Qisong; Yin Tao; Yang Haigang, E-mail: yanghg@mail.ie.ac.c [Institute of Electronics, Chinese Academy of Sciences, Beijing 100190 (China)

    2009-11-15

    This paper presents a high precision CMOS readout circuit for a capacitive MEMS gyroscope. A continuous time topology is employed as well as the chopper noise cancelling technique. A detailed analysis of the noise and mismatch of the capacitive readout circuit is given. The analysis and measurement results have shown that thermal noise dominates in the proposed circuit, and several approaches should be used for both noise and mismatch optimization. The circuit chip operates under a single 5 V supply, and has a measured capacitance resolution of 0.2 aF/sq rootHz. With such a readout circuit, the gyroscope can accurately measure the angular rate with a sensitivity of 15.3 mV/{sup 0}/s. (semiconductor integrated circuits)

  12. Noise and mismatch optimization for capacitive MEMS readout

    Institute of Scientific and Technical Information of China (English)

    Zhang Chong; Wu Qisong; Yin Tao; Yang Haigang

    2009-01-01

    This paper presents a high precision CMOS readout circuit for a capacitive MEMS gyroscope. A continuous time topology is employed as well as the chopper noise cancelling technique. A detailed analysis of the noise and mismatch of the capacitive readout circuit is given. The analysis and measurement results have shown that thermal noise dominates in the proposed circuit, and several approaches should be used for both noise and mismatch optimization. The circuit chip operates under a single 5 V supply, and has a measured capacitance resolution of 0.2 aF/√Hz. With such a readout circuit, the gyroscope can accurately measure the angular rate with a sensitivity of 15.3 mV/°/s.

  13. Intrinsic Low Hysteresis Touch Mode Capacitive Pressure Sensor

    DEFF Research Database (Denmark)

    Fragiacomo, Giulio; Pedersen, Thomas; Hansen, Ole

    2011-01-01

    Hysteresis has always been one of the main concerns when fabricating touch mode capacitive pressure sensors (TMCPS). This phenomenon can be fought at two different levels: during fabrication or after fabrication with the aid of a dedicated signal conditioning circuit. We will describe a microfabr......Hysteresis has always been one of the main concerns when fabricating touch mode capacitive pressure sensors (TMCPS). This phenomenon can be fought at two different levels: during fabrication or after fabrication with the aid of a dedicated signal conditioning circuit. We will describe...... a microfabrication step that can be introduced in order to reduce drastically the hysteresis of this type of sensors without compromising their sensitivity. Medium-high range (0 to 10 bar absolute pressure) TMCPS with a capacitive signal span of over 100pF and less than 1 % hysteresis in the entire pressure range...

  14. Preamplifiers for non-contact capacitive biopotential measurements*

    Science.gov (United States)

    Peng, GuoChen; Ignjatovic, Zeljko; Bocko, Mark F.

    2014-01-01

    Non-contact biopotential sensing is an attractive measurement strategy for a number of health monitoring applications, primarily the ECG and the EEG. In all such applications a key technical challenge is the design of a low-noise trans-impedance preamplifier for the typically low-capacitance, high source impedance sensing electrodes. In this paper, we compare voltage and charge amplifier designs in terms of their common mode rejection ratio, noise performance, and frequency response. Both amplifier types employ the same operational-transconductance amplifier (OTA), which was fabricated in a 0.35um CMOS process. The results show that a charge amplifier configuration has advantages for small electrode-to-subject coupling capacitance values (less than 10 pF - typical of noncontact electrodes) and that the voltage amplifier configuration has advantages for electrode capacitances above 10 pF. PMID:24109979

  15. Preamplifiers for non-contact capacitive biopotential measurements.

    Science.gov (United States)

    Peng, GuoChen; Ignjatovic, Zeljko; Bocko, Mark F

    2013-01-01

    Non-contact biopotential sensing is an attractive measurement strategy for a number of health monitoring applications, primarily the ECG and the EEG. In all such applications a key technical challenge is the design of a low-noise trans-impedance preamplifier for the typically low-capacitance, high source impedance sensing electrodes. In this paper, we compare voltage and charge amplifier designs in terms of their common mode rejection ratio, noise performance, and frequency response. Both amplifier types employ the same operational-transconductance amplifier (OTA), which was fabricated in a 0.35 um CMOS process. The results show that a charge amplifier configuration has advantages for small electrode-to-subject coupling capacitance values (less than 10 pF--typical of noncontact electrodes) and that the voltage amplifier configuration has advantages for electrode capacitances above 10 pF.

  16. Comprehensive measurements of GaAs pixel detectors capacitance

    CERN Document Server

    Caria, M; D'Auria, S; Lai, A; Randaccio, P; Cadeddu, S

    2002-01-01

    We have studied GaAs pixel detectors on semi-insulating wafers with Schottky contacts. We performed comprehensive measurements on the inter-pixel and capacitance to back plane. Being semi-insulating, the behaviour is totally different with respect to other common semiconductors, such as high resistivity silicon. Non-homogeneities are also an issue, due to both the contacts and the crystal bulk. In order to detect them and their influence on capacitance, we undertook systematic measurements with different configurations of the measuring electrodes.

  17. An Effective Hybrid Optimization Algorithm for Capacitated Vehicle Routing Problem

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Capacitated vehicle routing problem (CVRP) is an important combinatorial optimization problem. However, it is quite difficult to achieve an optimal solution with the traditional optimization methods owing to the high computational complexity. A hybrid algorithm was developed to solve the problem, in which an artificial immune clonal algorithm (AICA) makes use of the global search ability to search the optimal results and simulated annealing (SA) algorithm employs certain probability to avoid becoming trapped in a local optimum. The results obtained from the computational study show that the proposed algorithm is a feasible and effective method for capacitated vehicle routing problem.

  18. Flexible Capacitive Electrodes for Minimizing Motion Artifacts in Ambulatory Electrocardiograms

    Directory of Open Access Journals (Sweden)

    Jeong Su Lee

    2014-08-01

    Full Text Available This study proposes the use of flexible capacitive electrodes for reducing motion artifacts in a wearable electrocardiogram (ECG device. The capacitive electrodes have conductive foam on their surface, a shield, an optimal input bias resistor, and guarding feedback. The electrodes are integrated in a chest belt, and the acquired signals are transmitted wirelessly for ambulatory heart rate monitoring. We experimentally validated the electrode performance with subjects standing and walking on a treadmill at speeds of up to 7 km/h. The results confirmed the highly accurate heart rate detection capacity of the developed system and its feasibility for daily-life ECG monitoring.

  19. Current Kink and Capacitance Frequency Dispersion in Silicon PIN Photodiodes

    Science.gov (United States)

    Guo, Xia; Feng, Yajie; Liu, Qiaoli; Wang, Huaqiang; Li, Chong; Hu, Zonghai; He, Xiaoying

    2017-09-01

    Silicon PIN photodiodes in the visible wavelength range have been widely applied in aerospace, defense, security, medical, and scientific instruments because of their high sensitivity and low cost. In this paper, the phenomena of the current kink and the capacitance frequency dispersion are observed. Contamination at the p-type Ohmic contact interface is proposed to explain the current kink effect and capacitance frequency dispersion, according to the temperature-dependent I-V measurement results in which trap-assisted tunneling process demonstrated.

  20. Penicillamine prevents ram sperm agglutination in media that support capacitation.

    Science.gov (United States)

    Leahy, T; Rickard, J P; Aitken, R J; de Graaf, S P

    2016-02-01

    Ram spermatozoa are difficult to capacitate in vitro. Here we describe a further complication, the unreported phenomenon of head-to-head agglutination of ram spermatozoa following dilution in the capacitation medium Tyrodes plus albumin, lactate and pyruvate (TALP). Sperm agglutination is immediate, specific and persistent and is not associated with a loss of motility. Agglutination impedes in vitro sperm handling and analysis. So the objectives of this study were to investigate the cause of sperm agglutination and potential agents which may reduce agglutination. The percentage of non-agglutinated, motile spermatozoa increased when bicarbonate was omitted from complete TALP suggesting that bicarbonate ions stimulate the agglutination process. d-penicillamine (PEN), a nucleophilic thiol, was highly effective at reducing agglutination. The inclusion of 250 μM PEN in TALP reduced the incidence of motile, agglutinated spermatozoa from 76.7 ± 2.7% to 2.8 ± 1.4%. It was then assessed if PEN (1 mM) could be included in existing ram sperm capacitation protocols (TALP +1 mM dibutyryl cAMP, caffeine and theophylline) to produce spermatozoa that were simultaneously capacitated and non-agglutinated. This protocol resulted in a sperm population which displayed high levels of tyrosine phosphorylated proteins and lipid disordered membranes (merocyanine-540) while remaining motile, viable, acrosome-intact and non-agglutinated. In summary, PEN (1 mM) can be included in ram sperm capacitation protocols to reduce sperm agglutination and allow for the in vitro assessment of ram sperm capacitation.

  1. Capacitance enhancement via electrode patterning

    Science.gov (United States)

    Ho, Tuan A.; Striolo, Alberto

    2013-11-01

    The necessity of increasing the energy density in electric double layer capacitors to meet current demand is fueling fundamental and applied research alike. We report here molecular dynamics simulation results for aqueous electrolytes near model electrodes. Particular focus is on the effect of electrode patterning on the structure of interfacial electrolytes, and on the potential drop between the solid electrodes and the bulk electrolytes. The latter is estimated by numerically integrating the Poisson equation using the charge densities due to water and ions accumulated near the interface as input. We considered uniform and patterned electrodes, both positively and negatively charged. The uniformly charged electrodes are modeled as graphite. The patterned ones are obtained by removing carbon atoms from the top-most graphene layer, yielding nanoscopic squares and stripes patterns. For simplicity, the patterned electrodes are effectively simulated as insulators (the charge remains localized on the top-most layer of carbon atoms). Our simulations show that the patterns alter the structure of water and the accumulation of ions at the liquid-solid interfaces. Using aqueous NaCl solutions, we found that while the capacitance calculated for three positively charged electrodes did not change much, that calculated for the negatively charged electrodes significantly increased upon patterning. We find that both water structure and orientation, as well as ion accumulation affect the capacitance. As electrode patterning affects differently water structure and ion accumulation, it might be possible to observe ion-specific effects. These results could be useful for advancing our understanding of electric double layer capacitors, capacitive desalination processes, as well as of fundamental interfacial electrolytes properties.

  2. Capacitance enhancement via electrode patterning

    Energy Technology Data Exchange (ETDEWEB)

    Ho, Tuan A.; Striolo, Alberto, E-mail: a.striolo@ucl.ac.uk [School of Chemical, Biological and Materials Engineering, The University of Oklahoma, Norman, Oklahoma 73019 (United States); Department of Chemical Engineering, University College London, Torrington Place, London WC1E 7JE (United Kingdom)

    2013-11-28

    The necessity of increasing the energy density in electric double layer capacitors to meet current demand is fueling fundamental and applied research alike. We report here molecular dynamics simulation results for aqueous electrolytes near model electrodes. Particular focus is on the effect of electrode patterning on the structure of interfacial electrolytes, and on the potential drop between the solid electrodes and the bulk electrolytes. The latter is estimated by numerically integrating the Poisson equation using the charge densities due to water and ions accumulated near the interface as input. We considered uniform and patterned electrodes, both positively and negatively charged. The uniformly charged electrodes are modeled as graphite. The patterned ones are obtained by removing carbon atoms from the top-most graphene layer, yielding nanoscopic squares and stripes patterns. For simplicity, the patterned electrodes are effectively simulated as insulators (the charge remains localized on the top-most layer of carbon atoms). Our simulations show that the patterns alter the structure of water and the accumulation of ions at the liquid-solid interfaces. Using aqueous NaCl solutions, we found that while the capacitance calculated for three positively charged electrodes did not change much, that calculated for the negatively charged electrodes significantly increased upon patterning. We find that both water structure and orientation, as well as ion accumulation affect the capacitance. As electrode patterning affects differently water structure and ion accumulation, it might be possible to observe ion-specific effects. These results could be useful for advancing our understanding of electric double layer capacitors, capacitive desalination processes, as well as of fundamental interfacial electrolytes properties.

  3. Fatigue In Tension Perpendicular to the Grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Uhre; Hoffmeyer, Preben;

    2004-01-01

    mechanism and a mechanism connected to damage introduced in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In arder to test the predictive validity of the result from the small tension specimens, fatigue experiments......Traditionally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...

  4. Fatigue in tension perpendicular to the grain

    DEFF Research Database (Denmark)

    Clorius, Christian Odin; Pedersen, Martin Bo Uhre; Hoffmeyer, Preben;

    1999-01-01

    mechanism and a mechanism connected to damage introduce in the loading sequences. The purpose of the present study is to disentangle the effect of duration of load from the effect of load oscillation in fatigue in tension perpendicular to the grain. Fatigue experiments are made on small specimens...... and on dowel type joints with slotted in steel plates. In series of ten, the small specimens are taken to fatigue failure in uniform tension at square wave shaped load cycles at 0.01 Hz and 0.1 Hz. In order to test the predictive validity of the result from the small tension specimens, fatigue experiments......Traditinally fatigue resistance is quantified as number of cycles to failure at a given stress level. A previous study by the authors showed that fatigue in compression parallel to the grain is governed partly by duration of load and partly by an effect of loading, i.e. a combination of a creep...

  5. Flexible PVDF ferroelectric capacitive temperature sensor

    KAUST Repository

    Khan, Naveed

    2015-08-02

    In this paper, a capacitive temperature sensor based on polyvinylidene fluoride (PVDF) capacitor is explored. The PVDF capacitor is characterized below its Curie temperature. The capacitance of the PVDF capacitor changes vs temperature with a sensitivity of 16pF/°C. The linearity measurement of the capacitance-temperature relation shows less than 0.7°C error from a best fit straight line. An LC oscillator based temperature sensor is demonstrated based on this capacitor.

  6. Compact monolithic capacitive discharge unit

    Science.gov (United States)

    Roesler, Alexander W.; Vernon, George E.; Hoke, Darren A.; De Marquis, Virginia K.; Harris, Steven M.

    2007-06-26

    A compact monolithic capacitive discharge unit (CDU) is disclosed in which a thyristor switch and a flyback charging circuit are both sandwiched about a ceramic energy storage capacitor. The result is a compact rugged assembly which provides a low-inductance current discharge path. The flyback charging circuit preferably includes a low-temperature co-fired ceramic transformer. The CDU can further include one or more ceramic substrates for enclosing the thyristor switch and for holding various passive components used in the flyback charging circuit. A load such as a detonator can also be attached directly to the CDU.

  7. A Low-Cost Universal Integrated Interface for Capacitive Sensors

    NARCIS (Netherlands)

    Heidary, A.

    2010-01-01

    This thesis reports the results of research on features, options and limitations of low-cost, high-performance, universal integrated interface for capacitive sensors. It concerns development-driven research, where the objectives of the research focus upon possible realization and application of the

  8. A Multifunction Low-Power Preamplifier for MEMS Capacitive Microphones

    DEFF Research Database (Denmark)

    Jawed, Syed Arsalan; Nielsen, Jannik Hammel; Gottardi, Massimo;

    2009-01-01

    A multi-function two-stage chopper-stabilized preamplifier (PAMP) for MEMS capacitive microphones (MCM) is presented. The PAMP integrates digitally controllable gain, high-pass filtering and offset control, adding flexibility to the front-end readout of MCMs. The first stage of the PAMP consists...

  9. Mass detection using capacitive resonant silicon resonator employing LC resonant circuit technique.

    Science.gov (United States)

    Kim, Sang-Jin; Ono, Takahito; Esashi, Masayoshi

    2007-08-01

    Capacitive resonant mass sensing using a single-crystalline silicon resonator with an electrical LC oscillator was demonstrated in ambient atmosphere. Using capacitive detection method, the detectable minimum mass of 1 x 10(-14) g was obtained in the self-oscillation of cantilever with a thickness of 250 nm. The noise amplitude of the sensor output corresponds to a vibration amplitude of 0.05 nm(Hz)(0.5) in the frequency domain compared with the actuation signal, which is equivalent to the detectable minimum capacitance variation of 2.4 x 10(-21) F. Using the capacitive detection method, mass/stress induced resonance frequency shift due to the adsorption of ethanol and moist vapor in a pure N(2) gas as a carrier is successfully demonstrated. These results show the high potential of capacitive silicon resonator for high mass/stress-sensitive sensor.

  10. 基于氧化铝陶瓷的电容式高温压力传感器%A Capacitive High Temperature Pressure Sensor Based on Alumina Ceramic

    Institute of Scientific and Technical Information of China (English)

    李晨; 谭秋林; 张文栋; 薛晨阳; 贾平岗; 李运芝; 熊继军

    2014-01-01

    氧化铝陶瓷因其稳定的机械性能和高温鲁棒性得到了广泛的应用。文章以LC谐振电路为技术背景,提出了一种基于氧化铝陶瓷的电容式高温压力传感器,并通过厚膜集成工艺技术将一个定值电感与一个可变电容集成在氧化铝陶瓷基板上实现了传感器的制备。对传感器进行高温环境下的压力测试,实验结果表明:传感器能够完成600℃高温环境下1到5 bar范围内压力的原位测试,且在600℃高温环境下传感器的重复性误差,迟滞性误差和零点漂移分别为8.3%,5.05%和3.7%。%Alumina ceramic has wide applications with its stable mechanical toughness and high temperature robust-ness. In the technical background of LC resonance circuit,this paper presents a capacitance high temperature pres-sure sensor based on alumina ceramics.A fixed inductance and a varied capacitance were integrated on the ceramic substrate through the thick film integrated technology.The sensor was tested in high temperature and pressure envi-ronments,and the experimental results shown that:the sensor can complete the pressure situ test at 600 ℃in range of 1 to 5 bar,and the repeatability error,hysteresis error and zero drift of the sensor were approximately 8. 3%,5�05% and 3.7%,respectively.

  11. The modelling of a capacitive microsensor for biosensing applications

    Science.gov (United States)

    Bezuidenhout, P. H.; Schoeman, J.; Joubert, T. H.

    2014-06-01

    Microsensing is a leading field in technology due to its wide application potential, not only in bio-engineering, but in other fields as well. Microsensors have potentially low-cost manufacturing processes, while a single device type can have various uses, and this consequently helps with the ever-growing need to provide better health conditions in rural parts of the world. Capacitive biosensors detect a change in permittivity (or dielectric constant) of a biological material, usually within a parallel plate capacitor structure which is often implemented with integrated electrodes of an inert metal such as gold or platinum on a microfluidic substrate typically with high dielectric constant. There exist parasitic capacitance components in these capacitive sensors, which have large influence on the capacitive measurement. Therefore, they should be considered for the development of sensitive and accurate sensing devices. An analytical model of a capacitive sensor device is discussed, which accounts for these parasitic factors. The model is validated with a laboratory device of fixed geometry, consisting of two parallel gold electrodes on an alumina (Al2O3) substrate mounted on a glass microscope slide, and with a windowed cover layer of poly-dimethyl-siloxane (PDMS). The thickness of the gold layer is 1μm and the electrode spacing is 300μm. The alumina substrate has a thickness of 200μm, and the high relative permittivity of 11.5 is expected to be a significantly contributing factor to the total device capacitance. The 155μm thick PDMS layer is also expected to contribute substantially to the total device capacitance since the relative permittivity for PDMS is 2.7. The wideband impedance analyser evaluation of the laboratory device gives a measurement result of 2pF, which coincides with the model results; while the handheld RLC meter readout of 4pF at a frequency of 10kHz is acceptable within the measurement accuracy of the instrument. This validated model will

  12. Perpendicular magnetic recording-Its development and realization

    Energy Technology Data Exchange (ETDEWEB)

    Iwasaki, Shun-ichi, E-mail: iwasaki@tohtech.ac.jp [Tohoku Institute of Technology, 35-1 Yagiyamakasumi-cho, Taihaku-ku, Sendai 982-8577 (Japan)

    2012-02-15

    Development of perpendicular magnetic recording is summarized along with learning from the research study. The early stage of perpendicular recording was conducted with the research philosophy of complementarity between perpendicular and horizontal recordings. Although present production of the perpendicular recording HDDs exceeds 600 million per year, development of perpendicular recording experienced the valley of death in the 1990s. The difficult period was overcome by the collaboration system of industrial and academic communities. The research on perpendicular recording brought about development of new research model as well as the historical view of the development of technology and innovation. The huge influence of perpendicular recording on society also taught us the relationship between science and technology with culture and civilization. - Research Highlights: > Discovery of circular magnetization led to idea of perpendicular recording. > SPT head and Co-Cr media were realized for practical perpendicular recording. > The complementarity between perpendicular and in-plane recording helped progress. > Death valley of research has been overcome by cooperation with potent companies. > Present mass production of HDDs is making a new civilization of the society.

  13. Waterproof, Ultrahigh Areal-Capacitance, Wearable Supercapacitor Fabrics.

    Science.gov (United States)

    Yang, Yu; Huang, Qiyao; Niu, Liyong; Wang, Dongrui; Yan, Casey; She, Yiyi; Zheng, Zijian

    2017-02-24

    High-performance supercapacitors (SCs) are promising energy storage devices to meet the pressing demand for future wearable applications. Because the surface area of a human body is limited to 2 m(2) , the key challenge in this field is how to realize a high areal capacitance for SCs, while achieving rapid charging, good capacitive retention, flexibility, and waterproofing. To address this challenge, low-cost materials are used including multiwall carbon nanotube (MWCNT), reduced graphene oxide (RGO), and metallic textiles to fabricate composite fabric electrodes, in which MWCNT and RGO are alternatively vacuum-filtrated directly onto Ni-coated cotton fabrics. The composite fabric electrodes display typical electrical double layer capacitor behavior, and reach an ultrahigh areal capacitance up to 6.2 F cm(-2) at a high areal current density of 20 mA cm(-2) . All-solid-state fabric-type SC devices made with the composite fabric electrodes and water-repellent treatment can reach record-breaking performance of 2.7 F cm(-2) at 20 mA cm(-2) at the first charge-discharge cycle, 3.2 F cm(-2) after 10 000 charge-discharge cycles, zero capacitive decay after 10 000 bending tests, and 10 h continuous underwater operation. The SC devices are easy to assemble into tandem structures and integrate into garments by simple sewing.

  14. Uncertainty Analysis of High Capacitance Calibration by Series Capacitor Method%串联电容法校准高值电容的不确定度分析

    Institute of Scientific and Technical Information of China (English)

    吴康; 李亚琭; 刘民

    2012-01-01

    The article analysis and calculate uncertainty of 10μF ~ lmF high capacitance' s measurement results by series capacitor method which standard are high accuracy bridge AH2700A and standard capacitor Agilent 16380C(l jiF). Via uncertainty analysis, measurement uncertainty of capacitor of 10 μF is 0.02% .measurement uncertainty of capacitor of 100 μF is 0.1% , the measurement uncertainty of capacitor of lmF is 0.6%.%分析与计算了利用高准确度自动电桥AH2700A及标准电容Agilent 16380C(1μF)为标准,采用串联电容法校准10μF~1mF高值电容的测量结果不确定度.经过不确定度分析,10μF电容的测量不确定达到0.02%,100μF电容的测量不确定达到0.1%,1mF电容的测量不确定达到0.6%.

  15. Capacitance-based assay for real-time monitoring of endocytosis and cell viability.

    Science.gov (United States)

    Lee, Rimi; Kim, Jihun; Kim, Sook Young; Jang, Seon Mi; Lee, Sun-Mi; Choi, In-Hong; Park, Seung Woo; Shin, Jeon-Soo; Yoo, Kyung-Hwa

    2012-07-07

    Label-free cell-based assays have emerged as a promising means for high-throughput screening. Most label-free sensors are based on impedance measurements that reflect the passive electrical properties of cells. Here we introduce a capacitance-based assay that measures the dielectric constant (capacitance) of biological cells, and demonstrate the feasibility of analyzing endocytosis and screening chemotherapeutic agents with this assay. Endocytosis induces a change in the zeta potential, leading to a change in the dielectric constant which enables real-time endocytosis monitoring using the capacitance sensor. Additionally, since the dielectric constant is proportional to cell radius and cell volume, cell viability can be estimated from the change in capacitance. Therefore, the capacitance sensor array can also be used for cytotoxicity testing for large-scale chemotherapeutic screening.

  16. Digital Control of a High Voltage (2.5 kV) Bidirectional Flyback DC-DC Converter for Driving a Capacitive Incremental Actuator

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Maksimovic, Dragan; Zhang, Zhe;

    2016-01-01

    on the output high-voltage (HV) side. Experimental results verifying the bidirectional operation of a high voltage flyback converter are presented, using a 3 kV polypropylene film capacitor as the load. The energy loss distributions of the converter when 4 kV and 4.5 kV HV MOSFETs are used on HV side...

  17. Heat-assisted magnetic probe recording onto a thin film with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Onoue, T; Siekman, M; Abelmann, L; Lodder, J C [Systems and Materials for Information storage (SMI), MESA Institute for Nanotechnology, University of Twente, PO Box 217, 7500 AE, Enschede (Netherlands)

    2008-08-07

    The possibility of magnetic probe recording into a continuous perpendicular medium is discussed. By applying a current from the tip to the medium, a very localized area can be heated and bits as small as 80 nm in diameter could be written. This value is close to the calculated minimum diameter of reversed cylindrical domains in our perpendicular medium. A current can be injected directly from the tip to the medium by means of a current source, or one can use capacitive currents. We prefer the first method, since the current, and therefore the heating process, can be controlled more precisely. The energy required to write a bit is in the order of 1 nJ. Calculations show that most of the heat is dissipated at the tip end. Demagnetizing fields of the surrounding material play an important role and are so strong that bits can be written without applying an external field. By decreasing the film thickness, the demagnetizing fields are reduced, and selective overwriting of previously written bits could be demonstrated.

  18. Novel RF-MEMS capacitive switching structures

    NARCIS (Netherlands)

    Rottenberg, X.; Jansen, H.; Fiorini, P.; De Raedt, W.; Tilmans, H.A.C.

    2002-01-01

    This paper reports on novel RF-MEMS capacitive switching devices implementing an electrically floating metal layer covering the dielectric to ensure intimate contact with the bridge in the down state. This results in an optimal switch down capacitance and allows optimisation of the down/up capacitan

  19. The pyramidal capacitated vehicle routing problem

    DEFF Research Database (Denmark)

    Lysgaard, Jens

    2010-01-01

    This paper introduces the pyramidal capacitated vehicle routing problem (PCVRP) as a restricted version of the capacitated vehicle routing problem (CVRP). In the PCVRP each route is required to be pyramidal in a sense generalized from the pyramidal traveling salesman problem (PTSP). A pyramidal...

  20. Characterization of Textile-Insulated Capacitive Biosensors

    Directory of Open Access Journals (Sweden)

    Charn Loong Ng

    2017-03-01

    Full Text Available Capacitive biosensors are an emerging technology revolutionizing wearable sensing systems and personal healthcare devices. They are capable of continuously measuring bioelectrical signals from the human body while utilizing textiles as an insulator. Different textile types have their own unique properties that alter skin-electrode capacitance and the performance of capacitive biosensors. This paper aims to identify the best textile insulator to be used with capacitive biosensors by analysing the characteristics of 6 types of common textile materials (cotton, linen, rayon, nylon, polyester, and PVC-textile while evaluating their impact on the performance of a capacitive biosensor. A textile-insulated capacitive (TEX-C biosensor was developed and validated on 3 subjects. Experimental results revealed that higher skin-electrode capacitance of a TEX-C biosensor yields a lower noise floor and better signal quality. Natural fabric such as cotton and linen were the two best insulating materials to integrate with a capacitive biosensor. They yielded the lowest noise floor of 2 mV and achieved consistent electromyography (EMG signals measurements throughout the performance test.

  1. Energy-Efficient Capacitive-Sensor Interfaces

    NARCIS (Netherlands)

    Tan, Z.

    2013-01-01

    This thesis describes the theory, design and realization of energy-efficient capacitive-sensor interfaces that are dedicated to energy-constrained applications. The goal of this work is to explore energy-efficient capacitive-sensor interface design techniques both at the system and the circuit level

  2. Capacitively-coupled chopper amplifiers

    CERN Document Server

    Fan, Qinwen; Huijsing, Johan H

    2017-01-01

    This book describes the concept and design of the capacitively-coupled chopper technique, which can be used in precision analog amplifiers. Readers will learn to design power-efficient amplifiers employing this technique, which can be powered by regular low supply voltage such as 2V and possibly having a +\\-100V input common-mode voltage input. The authors provide both basic design concepts and detailed design examples, which cover the area of both operational and instrumentation amplifiers for multiple applications, particularly in power management and biomedical circuit designs. Discusses basic working principles and details of implementation for proven designs; Includes a diverse set of applications, along with measurement results to demonstrate the effectiveness of the technique; Explains advantages and drawbacks of the technique, given particular circumstances.

  3. Compensation of the detector capacitance presented to charge-sensitive preamplifiers using the Miller effect

    Energy Technology Data Exchange (ETDEWEB)

    Kwon, Inyong, E-mail: iykwon@umich.edu [University of Michigan, Ann Arbor, MI (United States); Kang, Taehoon, E-mail: thnkang@umich.edu [University of Michigan, Ann Arbor, MI (United States); Wells, Byron T., E-mail: wells@galtresearch.com [Galt LLC, Ypsilanti, MI (United States); D’Aries, Lawrence J., E-mail: lawrence.j.daries.civ@mail.mil [Picatinny Arsenal, Rockaway Township, NJ (United States); Hammig, Mark D., E-mail: hammig@umich.edu [University of Michigan, Ann Arbor, MI (United States)

    2015-06-01

    This paper describes an integrated circuit design for a modified charge-sensitive amplifier (CSA) that compensates for the effect of capacitance presented by nuclear radiation detectors and other sensors. For applications that require large area semiconductor detectors or for those semiconductor sensors derived from high permittivity materials such as PbSe, the detector capacitance can degrade the system gain and bandwidth of a front-end preamplifier, resulting in extended rise times and attenuated output voltage signals during pulse formation. In order to suppress the effect of sensor capacitance, we applied a bootstrap technique into a traditional CSA. The technique exploits the Miller effect by reducing the effective voltage difference between the two sides of a radiation detector which minimizes the capacitance presented to the differential common-source amplifier. This new configuration is successfully designed to produce effective gain even at high detector capacitance. The entire circuit, including a core CSA with feedback components and a bootstrap amplifier, are implemented in a 0.18 μm CMOS process with a 3.3 V supply voltage. - Highlights: • A modified CSA was implemented for detector capacitance compensation. • Increasing detector capacitance degrades gain and rise time. • A bootstrap amplifier exploiting the Miller effect is described. • It allows using large area radiation sensors for high radiation-interaction rates. • Intensive noise analyses show that SNR is much better with the technique.

  4. Ultrahigh volumetric capacitance and cyclic stability of fluorine and nitrogen co-doped carbon microspheres

    Science.gov (United States)

    Zhou, Junshuang; Lian, Jie; Hou, Li; Zhang, Junchuan; Gou, Huiyang; Xia, Meirong; Zhao, Yufeng; Strobel, Timothy A.; Tao, Lu; Gao, Faming

    2015-09-01

    Highly porous nanostructures with large surface areas are typically employed for electrical double-layer capacitors to improve gravimetric energy storage capacity; however, high surface area carbon-based electrodes result in poor volumetric capacitance because of the low packing density of porous materials. Here, we demonstrate ultrahigh volumetric capacitance of 521 F cm-3 in aqueous electrolytes for non-porous carbon microsphere electrodes co-doped with fluorine and nitrogen synthesized by low-temperature solvothermal route, rivaling expensive RuO2 or MnO2 pseudo-capacitors. The new electrodes also exhibit excellent cyclic stability without capacitance loss after 10,000 cycles in both acidic and basic electrolytes at a high charge current of 5 A g-1. This work provides a new approach for designing high-performance electrodes with exceptional volumetric capacitance with high mass loadings and charge rates for long-lived electrochemical energy storage systems.

  5. Study and stability improving of operational amplifiers in the capacitance sensor drivers

    Directory of Open Access Journals (Sweden)

    Hotra Z. Yu.

    2008-06-01

    Full Text Available Driver for capacitance loads more than 10 nF is developed and investigated. Driver provides high operational stability of the transducer by decoupling operational amplifier output from reactive load.

  6. Perpendicular magnetic anisotropy in CoXPd100-X alloys for magnetic tunnel junctions

    Science.gov (United States)

    Clark, B. D.; Natarajarathinam, A.; Tadisina, Z. R.; Chen, P. J.; Shull, R. D.; Gupta, S.

    2017-08-01

    CoFeB/MgO-based perpendicular magnetic tunnel junctions (p-MTJ's) with high anisotropy and low damping are critical for spin-torque transfer random access memory (STT-RAM). Most schemes of making the pinned CoFeB fully perpendicular require ferrimagnets with high damping constants, a high temperature-grown L10 alloy, or an overly complex multilayered synthetic antiferromagnet (SyAF). We report a compositional study of perpendicular CoxPd alloy-pinned Co20Fe60B20/MgO based MTJ stacks, grown at moderate temperatures in a planetary deposition system. The perpendicular anisotropy of the CoxPd alloy films can be tuned based on the layer thickness and composition. The films were characterized by alternating gradient magnetometry (AGM), energy-dispersive X-rays (EDX), and X-ray diffraction (XRD). Current-in-plane tunneling (CIPT) measurements have also been performed on the compositionally varied CoxPd MTJ stacks. The CoxPd alloy becomes fully perpendicular at approximately x = 30% (atomic fraction) Co. Full-film MTJ stacks of Si/SiO2/MgO (13)/CoXPd100-x (50)/Ta (0.3)/CoFeB (1)/MgO (1.6)/CoFeB (1)/Ta (5)/Ru (10), with the numbers enclosed in parentheses being the layer thicknesses in nm, were sputtered onto thermally oxidized silicon substrates and in-situ lamp annealed at 400 °C for 5 min. CIPT measurements indicate that the highest TMR is observed for the CoPd composition with the highest perpendicular magnetic anisotropy.

  7. Nanocomposite of p-type conductive polymer/functionalized graphene oxide nanosheets as novel and hybrid electrodes for highly capacitive pseudocapacitors.

    Science.gov (United States)

    Ehsani, A; Mohammad Shiri, H; Kowsari, E; Safari, R; Torabian, J; Kazemi, S

    2016-09-15

    An effective approach for increasing the life cycle of poly ortho aminophenol (POAP) as a p-type conductive polymers is combining conventional conductive polymers and nanomaterials to fabricate hybrid electrodes. In this paper, functionalized graphene oxide (FGO) has first been synthesized using a chemical approach. Hybrid POAP/FGO films have then been fabricated by POAP electropolymerization in the presence of FGO nanoparticles as active electrodes for electrochemical supercapacitors. Based on the atomic scale study results, it seems that H3PO4(-) oxygen atoms and terminal pyridine ring nitrogen atoms play a crucial role in the intramolecular charge and energy transfer in the FGO molecular systems. Theoretical studies, surface and electrochemical analyses have been used for characterization of POAP/FGO composite films. Different electrochemical methods including galvanostatic charge discharge experiments, cyclic voltammetry and electrochemical impedance spectroscopy have been applied to study the system performance. This work introduces new nanocomposite materials for electrochemical redox capacitors with such advantages as the ease of synthesis, high active surface area and stability in an aqueous electrolyte.

  8. Sperm capacitation in the porcine oviduct.

    Science.gov (United States)

    Tienthai, P; Johannisson, A; Rodriguez-Martinez, H

    2004-01-01

    In vitro studies suggests that sperm capacitation occurs in the sperm reservoir (SR) of the pig, with spermatozoa progressing towards the ampullary-isthmic junction (AIJ) around ovulation as a consequence of capacitation/hyperactivation. In contrast, in vivo studies are scarce. Consequently, we determined the degree of capacitation in boar spermatozoa that were retrieved from the SR of sows at well-defined periods of spontaneous standing oestrus, namely pre-, peri- and post-ovulation, using flow cytometry of Merocyanine-540/Yo-Pro-1-loaded spermatozoa. SR-spermatozoa retrieved and incubated in non-capacitating medium (bicarbonate-free mBO [mBO-]) were largely viable (70-85%) and uncapacitated (69-73%), irrespective of the stage of oestrus considered. Those undergoing capacitation were a minor proportion (1-5%) during pre- and peri-ovulation, but they significantly increased (14%) in post-ovulation oestrus. To clarify whether these SR-spermatozoa were able to undergo capacitation under stimuli, sperm aliquots were challenged in vitro either by incubation in a bicarbonate-rich medium (capacitation medium, mBO+), then further in mBO+ with 20% (v/v) of in vivo collected homologous pre-ovulatory isthmic oviductal fluid (IOF), or incubation with hyaluronan (HA, 500 microg/ml). Exposure to mBO+ significantly increased the sub-population of capacitated spermatozoa from the pre- and peri-ovulation SR, indicating that the uncapacitated SR-spermatozoa were responsive to the effector/inducer bicarbonate at levels recorded in peri-ovulatory AIJ/ampulla in vivo. While addition of IOF or HA to SR-spermatozoa incubated in capacitating medium (mBO+) maintained sperm viability without obviously inducing capacitation in pre- or peri-ovulatory SR-spermatozoa, they significantly increased these percentages during post-ovulation, when compared to baseline values of control incubations (mBO-). The results suggest that massive sperm capacitation does not occur in vivo in the porcine SR

  9. Reducing the capacitance of piezoelectric film sensors

    Energy Technology Data Exchange (ETDEWEB)

    González, Martín G., E-mail: mggonza@fi.uba.ar [Grupo de Láser, Óptica de Materiales y Aplicaciones Electromagnéticas (GLOMAE), Departamento de Física, Facultad de Ingeniería, Universidad de Buenos Aires, Paseo Colón 850, C1063ACV Buenos Aires (Argentina); Consejo Nacional de Investigaciones Científicas y Técnicas (CONICET), C1425FQB Buenos Aires (Argentina); Sorichetti, Patricio A.; Santiago, Guillermo D. [Grupo de Láser, Óptica de Materiales y Aplicaciones Electromagnéticas (GLOMAE), Departamento de Física, Facultad de Ingeniería, Universidad de Buenos Aires, Paseo Colón 850, C1063ACV Buenos Aires (Argentina)

    2016-04-15

    We present a novel design for large area, wideband, polymer piezoelectric sensor with low capacitance. The large area allows better spatial resolution in applications such as photoacoustic tomography and the reduced capacitance eases the design of fast transimpedance amplifiers. The metalized piezoelectric polymer thin film is segmented into N sections, electrically connected in series. In this way, the total capacitance is reduced by a factor 1/N{sup 2}, whereas the mechanical response and the active area of the sensor are not modified. We show the construction details for a two-section sensor, together with the impedance spectroscopy and impulse response experimental results that validate the design.

  10. Nonstationarity of a two-dimensional perpendicular shock: Competing mechanisms

    Science.gov (United States)

    Lembège, Bertrand; Savoini, Philippe; Hellinger, Petr; Trávníček, Pavel M.

    2009-03-01

    Two-dimensional particle-in-cell (PIC) simulations are used for analyzing in detail different nonstationary behaviors of a perpendicular supercritical shock. A recent study by Hellinger et al. (2007) has shown that the front of a supercritical shock can be dominated by the emission of large-amplitude whistler waves. These waves inhibit the self-reformation driven by the reflected ions; then, the shock front appears almost ``quasi-stationary.'' The present study stresses new complementary results. First, for a fixed β i value, the whistler waves emission (WWE) persists for high M A above a critical Mach number (i.e., M A >= M A WWE). The quasi-stationarity is only apparent and disappears when considering the full 3-D field profiles. Second, for lower M A , the self-reformation is retrieved and becomes dominant as the amplitude of the whistler waves becomes negligible. Third, there exists a transition regime in M A within which both processes compete each other. Fourth, these results are observed for a strictly perpendicular shock only as B 0 is within the simulation plane. When B 0 is out of the simulation plane, no whistler waves emission is evidenced and only self-reformation is recovered. Fifth, the occurrence and disappearance of the nonlinear whistler waves are well recovered in both 2-D PIC and 2-D hybrid simulations. The impacts on the results of the mass ratio (2-D PIC simulations), of the resistivity and spatial resolution (2-D hybrid simulations), and of the size of the simulation box along the shock front are analyzed in detail.

  11. Tuneable perpendicular magnetic anisotropy in single crystal [Co/Ni](111) superlattices

    Energy Technology Data Exchange (ETDEWEB)

    Gottwald, M; Girod, S; Andrieu, S; Mangin, S, E-mail: gottwald@lpm.u-nancy.fr [Institut Jean Lamour, CNRS - Nancy Universite, BP 239, F-54506 Vandoeuvre (France)

    2010-06-15

    This paper is dedicated to the preparation of thin film with a strong perpendicular to the film plane magnetic anisotropy, behaviour of great interest for spintronics. Single-crystalline [Co/Ni] (111) superlattices have been grown by molecular beam epitaxy. The epitaxial growth of Co and Ni was controlled by using reflection high energy diffraction (RHEED), allowing us to get an accurate control of the thicknesses. The superlattices magnetic properties were studied using magnetometry. All of them exhibit strong perpendicular to the plane magnetic anisotropy. The maximum of magneto-crystalline anisotropy is obtained for one cobalt mo nolayer. A simple model which takes into account surface and volume anisotropy explains the evolution of perpendicular anisotropy in these layers.

  12. Engineering spin-orbit torque in Co/Pt multilayers with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Huang, Kuo-Feng; Wang, Ding-Shuo; Lai, Chih-Huang, E-mail: chlai@mx.nthu.edu.tw [Department of Materials Science and Engineering, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Lin, Hsiu-Hau [Department of Physics, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2015-12-07

    To address thermal stability issues for spintronic devices with a reduced size, we investigate spin-orbit torque in Co/Pt multilayers with strong perpendicular magnetic anisotropy. Note that the spin-orbit torque arises from the global imbalance of the spin currents from the top and bottom interfaces for each Co layer. By inserting Ta or Cu layers to strengthen the top-down asymmetry, the spin-orbit torque efficiency can be greatly modified without compromised perpendicular magnetic anisotropy. Above all, the efficiency builds up as the number of layers increases, realizing robust thermal stability and high spin-orbit-torque efficiency simultaneously in the multilayers structure.

  13. Engineering spin-orbit torque in Co/Pt multilayers with perpendicular magnetic anisotropy

    Science.gov (United States)

    Huang, Kuo-Feng; Wang, Ding-Shuo; Lin, Hsiu-Hau; Lai, Chih-Huang

    2015-12-01

    To address thermal stability issues for spintronic devices with a reduced size, we investigate spin-orbit torque in Co/Pt multilayers with strong perpendicular magnetic anisotropy. Note that the spin-orbit torque arises from the global imbalance of the spin currents from the top and bottom interfaces for each Co layer. By inserting Ta or Cu layers to strengthen the top-down asymmetry, the spin-orbit torque efficiency can be greatly modified without compromised perpendicular magnetic anisotropy. Above all, the efficiency builds up as the number of layers increases, realizing robust thermal stability and high spin-orbit-torque efficiency simultaneously in the multilayers structure.

  14. Approaching the theoretical capacitance of graphene through copper foam integrated three-dimensional graphene networks

    DEFF Research Database (Denmark)

    Dey, Ramendra Sundar; Hjuler, Hans Aage; Chi, Qijin

    2015-01-01

    We report a facile and low-cost approach for the preparation of all-in-one supercapacitor electrodes using copper foam (CuF) integrated three-dimensional (3D) reduced graphene oxide (rGO) networks. The binderfree 3DrGO@CuF electrodes are capable of delivering high specific capacitance approaching...... the theoretical capacitance of graphene and exhibiting high charge–discharge cycling stability....

  15. Effect of Solar Array Capacitance on the Performance of Switching Shunt Voltage Regulator

    OpenAIRE

    Kumar, Anil R; Suresh, MS; Nagaraju, J

    2006-01-01

    Due to high power demand photovoltaic regulators are being switched at high frequency. The solar cell capacitance increases the ripple voltage of the switching regulators at higher switching frequencies. Increased ripple due to array capacitance is calculated and its effect in limiting the maximum design switching frequency is studied. An experimental switching regulator is designed and used to confirm the theoretical considerations. This study has identified a method of solar cell capacitanc...

  16. X-ray analysis of oxygen-induced perpendicular magnetic anisotropy in Pt/Co/AlO{sub x} trilayers

    Energy Technology Data Exchange (ETDEWEB)

    Manchon, A. [SPINTEC, URA 2512 CEA/CNRS, CEA/Grenoble, 38054 Grenoble Cedex 9 (France)], E-mail: aurelien.manchon@m4x.org; Pizzini, S.; Vogel, J.; Uhlir, V. [Institut Neel, CNRS/UJF, B.P. 166, 38042 Grenoble Cedex 9 (France); Lombard, L.; Ducruet, C.; Auffret, S.; Rodmacq, B.; Dieny, B. [SPINTEC, URA 2512 CEA/CNRS, CEA/Grenoble, 38054 Grenoble Cedex 9 (France); Hochstrasser, M. [Laboratory for Solid State Physics, ETH Zuerich, 8093 Zuerich (Switzerland); Panaccione, G. [Laboratory TASC, INFM-CNR, Area Science Park, S.S.14, Km 163.5, I-34012, Trieste (Italy)

    2008-07-15

    X-ray spectroscopy measurements have been performed on a series of Pt/Co/AlO{sub x} trilayers to investigate the role of Co oxidation in the perpendicular magnetic anisotropy of the Co/AlO{sub x} interface. It is observed that high temperature annealing modifies the magnetic properties of the Co layer, inducing an enhancement of the perpendicular magnetic anisotropy. The microscopic structural properties are analyzed via X-ray Absorption Spectroscopy, X-ray Magnetic Circular Dichroism and X-ray Photoelectron Spectroscopy measurements. It is shown that annealing enhances the amount of interfacial oxide, which may be at the origin of a strong perpendicular magnetic anisotropy.

  17. Effect of surface asperities on the capacitances of capacitive RF MEMS switches

    Science.gov (United States)

    Chen, Zhiqiang; Tian, Wenchao; Zhang, Xiaotong

    2017-03-01

    The effects of surface asperities on the up- and down-state capacitances of the capacitive radio frequency (RF) micro electromechanical system (MEMS) switches were studied in this paper based on the single asperity model and statics. The research results demonstrated that surface asperities effects on the up-state capacitance could be neglected, whereas surface asperities must be taken into consideration at the down-state position in the RF MEMS switches because the surface asperities significantly affected the down-state capacitance. The down-state capacitance typically decreased as the root mean square (RMS) roughness and asperity radius increased. The down-state capacitance was approximately 26% of the theoretical value when the RMS roughness was 20 nm, and 32% of the theoretical value when the asperity radius was 100 nm. The experimental results were in good agreement with the simulation results.

  18. Complementary surface charge for enhanced capacitive deionization

    NARCIS (Netherlands)

    Gao, X.; Porada, S.; Omosebi, A.; Liu, K.L.; Biesheuvel, P.M.; Landon, J.

    2016-01-01

    Commercially available activated carbon cloth electrodes are treated using nitric acid and ethylenediamine solutions, resulting in chemical surface charge enhanced carbon electrodes for capacitive deionization (CDI) applications. Surface charge enhanced electrodes are then configured in a CDI cel

  19. Capacitive Cells for Dielectric Constant Measurement

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco

    2015-01-01

    A simple capacitive cell for dielectric constant measurement in liquids is presented. As an illustrative application, the cell is used for measuring the degradation of overheated edible oil through the evaluation of their dielectric constant.

  20. Capacitive Cells for Dielectric Constant Measurement

    Science.gov (United States)

    Aguilar, Horacio Munguía; Maldonado, Rigoberto Franco

    2015-01-01

    A simple capacitive cell for dielectric constant measurement in liquids is presented. As an illustrative application, the cell is used for measuring the degradation of overheated edible oil through the evaluation of their dielectric constant.

  1. 农用高压电网圆柱形殷钢电容分压器边缘效应的研究%Application Study of Agricultural High-voltage Grid of Cylindrical Invar on Capacitive Divider Edge Effects

    Institute of Scientific and Technical Information of China (English)

    董赫; 李伟凯

    2015-01-01

    By comparing the calculated value and actual measurement value of invar on the capacitive voltage divider,the presence of edge effects caused the actual results was too large capacitive divider conclusions. The theoretical analysis was used as a starting point and combined with calculus theory and capacitors idea,and the edge effects formula of the total capacitance value was derived. According to the characteristics of the cylindrical capacitor,the approach of increasing the capacitive divider edge capacitance on the ring chamfer radius was provided to weaken the edge effect,and the test had been passed to verify the program feasibility.%通过殷钢电容分压器理论计算值与实际测量值的对比,得到边缘效应的存在导致电容分压器的实际测量值偏大的结论。以理论分析为切入点,结合微积分原理及电容串联思想,推导出计及边缘效应的分压器电容值计算公式。针对圆柱形电容器的特点,提出利用增加电容分压器边缘电容环倒角半径的方法来削弱边缘效应,并通过试验验证了该方案的可行性。

  2. Magnetic structures in Co---Cr media for perpendicular magnetic recording

    NARCIS (Netherlands)

    Lodder, J.C.

    1996-01-01

    High bit densities have been demonstrated in longitudinal as well as in perpendicular magnetic recording. For the latter an area density of more than 12 Gbit/in2 has been obtained in a sputtered Co---Cr---Ta hard disk with a soft magnetic underlayer recorded with a special single pole head. In this

  3. Magnetic domains in epitaxial BaFe12O19 thin films with perpendicular anisotropy

    NARCIS (Netherlands)

    Lisfi, A.; Lodder, J.C.

    2002-01-01

    Magnetic domains, microstructure and magnetic properties of highly oriented barium ferrite thin films with perpendicular anisotropy have been investigated with magnetic force microscopy (MFM), VSM, SEM and TEM. Two kinds of magnetic domain are energetically favourable: (a) cluster-like structure in

  4. Ultra High Temperature Capacitive Pressure Sensor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — To improve the working performance, increase efficiency, reduce cost, and track system health status and failure modes of advanced propulsion systems; miniaturized,...

  5. An uncooled capacitive sensor for IR detection

    Science.gov (United States)

    Siebke, Georg; Gerngroß, Kathrin; Holik, Peter; Schmitz, Sam; Rohloff, Markus; Tätzner, Simon; Steltenkamp, Siegfried

    2014-06-01

    The beetle Melanophila acuminata detects forest fires from distances as far as 80 miles away. To accomplish this, the beetle uses highly specific IR receptors with a diameter of approximately 15 μm. These receptors are mechanoreceptors that detect deformations induced by the absorption of radiation. Although the detection mechanism is understood in principle, it is still unclear how the beetle reaches such high sensitivity. In this work, we present the biomimetic approach of an uncooled IR sensor based on the beetle's receptors. This sensor is based on a fluid-filled pressure cell and operates at room temperature. Upon absorbing IR radiation, the fluid heats up and expands. The expanding fluid deflects one electrode of a plate capacitor. By measuring the change in capacitance, the volume increase and the absorbed energy can be inferred. To prevent the risk of damage at high energy absorption, a compensation mechanism is presented in this work. The mechanism prevents large but slow volume changes inside the pressure cell by a microfluidic connection of the pressure cell with a compensation chamber. The channel and the compensation chamber act as a microfluidic low-pass filter and do not affect the overall sensitivity above an appropriate cut-off frequency. Using MEMS technology, we are able to incorporate the complete system into a silicon chip with an area of a few mm2. Here, we show a proof-of-concept and first measurements of the sensor.

  6. Nanopatterned CoPt alloys with perpendicular magnetic anisotropy

    Science.gov (United States)

    Makarov, D.; Bermúdez-Ureña, E.; Schmidt, O. G.; Liscio, F.; Maret, M.; Brombacher, C.; Schulze, S.; Hietschold, M.; Albrecht, M.

    2008-10-01

    CoPt alloy films with perpendicular magnetic anisotropy were grown on SiO2 nanoparticle arrays with particle sizes as small as 10 nm. In order to induce perpendicular magnetic anisotropy in the CoPt film, a MgO seed layer was sputter deposited. Despite the fact that neighboring CoPt film caps are interconnected, individual caps appear as single domain and for most of them their magnetization orientation can be reversed individually. This behavior might be caused by domain wall nucleation and pinning preferentially at the rim of each cap. Thus, arrays of magnetic caps with defined pinning sites can be considered as a percolated perpendicular medium.

  7. SALT segmented primary mirror: commissioning capacitive edge sensing system and performance comparison with inductive sensor

    Science.gov (United States)

    Buous, Sebastien; Menzies, John; Gajjar, Hitesh

    2008-07-01

    The SAMS (Segment Alignment Measurement System) is a capacitance-based edge sensing solution for the active alignment of the 10m SALT segmented primary mirror. Commissioning and calibrating the system has been an ongoing task in an attempt to counteract the unfavourable response of the sensors to high humidity conditions and high dust levels. Several solutions were implemented and tested including real-time feedback systems and the application of corrective functions. In parallel with the continuing efforts to improve the performance of the capacitive sensors, we have also been testing a prototype inductive sensor developed by Fogale Nanotech that is of a very similar flexible plate construction. In this paper we present the results obtained and performance gains achieved thus far with the capacitive edge-sensing system as well as a performance comparison of the Fogale inductive sensor to the capacitive edge sensor.

  8. Facile fabrication of cobalt oxalate nanostructures with superior specific capacitance and super-long cycling stability

    Science.gov (United States)

    Cheng, Guanhua; Si, Conghui; Zhang, Jie; Wang, Ying; Yang, Wanfeng; Dong, Chaoqun; Zhang, Zhonghua

    2016-04-01

    Transition metal oxalate materials have shown huge competitive advantages for applications in supercapacitors. Herein, nanostructured cobalt oxalate supported on cobalt foils has been facilely fabricated by anodization, and could directly serve as additive/binder-free electrodes for supercapacitors. The as-prepared cobalt oxalate electrodes present superior specific capacitance of 1269 F g-1 at the current density of 6 A g-1 in the galvanostatic charge/discharge test. Moreover, the retained capacitance is as high as 87.2% as the current density increases from 6 A g-1 to 30 A g-1. More importantly, the specific capacitance of cobalt oxalate retains 91.9% even after super-long cycling of 100,000 cycles. In addition, an asymmetric supercapacitor assembled with cobalt oxalate (positive electrode) and activated carbon (negative electrode) demonstrates excellent capacitive performance with high energy density and power density.

  9. Design of auto-tuning capacitive power transfer system for wireless power transfer

    Science.gov (United States)

    Lu, Kai; Kiong Nguang, Sing

    2016-09-01

    This paper presents the design of capacitive wireless power transfer systems based on a Class-E inverter approach. The main reason for adopting the Class-E inverter approach is because of its high efficiency, theoretically 100%. However, the operation of a Class-E inverter is highly sensitive to its circuit's parameters. In a typical capacitive wireless power transfer application, the capacitive coupling distance between plates is subject to changes, and hence its power transfer efficiency is greatly affected if the Class-E inverter is properly tuned. This drawback motivates us to develop an auto frequency tuning algorithm for a Class-E inverter which maintains its power transfer efficiency in spite of the variations of capacitive coupling distances between plates and circuit's parameters. Finally, simulation and experiment are carried out to verify the effectiveness of the auto frequency tuning algorithm.

  10. Enhanced Capacitive Characteristics of Activated Carbon by Secondary Activation

    Institute of Scientific and Technical Information of China (English)

    YANG Hui; LU Tian-hong; Yoshio Masaki

    2004-01-01

    The effect of the improvement of commercial activated carbon(AC) on its specific capacitance and high rate capability of double layer(dl) charging/discharging process has been studied. The improvement of AC was carried out via a secondary activation under steam in the presence of catalyst NiCl2, and the suitable condition was found to be a heat treatment at about 875 ℃ for 1 h. Under those conditions, the discharge specific capacitance of the improved AC increases up to 53.67 F/g, showing an increase of about 25% as compared with that of as-received AC. The good rectangular-shaped voltammograms and A.C. impedance spectra prove that the high rate capability of the capacitor made of the improved AC is enhanced significantly. The capacitance resistance(RC) time constant of the capacitor containing the improved AC is 1.74 s, which is much lower than that of the one containing as-received AC(an RC value of 4. 73 s). It is noted that both kinds of AC samples show a similar specific surface area and pore size distribution, but some changes have taken place in the carbon surface groups, especially a decrease in the concentration of surface carbonyl groups after the improvement, which have been verified by means of X-photoelectron spectroscopy. Accordingly, it is suggested that the decrease in the concentration of surface carbonyl groups for the improved AC is beneficial to the organic electrolyte ion penetrating into the pores, thus leading to the increase in both the specific capacitance and high rate capability of the supercapacitor.

  11. Sugar Cube Purity: Capacitive Sensing and Image Processing Approach

    Science.gov (United States)

    Madhumitha, S.; Rajath, R.; Venkatanathan, N.; Raajan, N. R.; Sridharan, M.

    2016-12-01

    Several methods have been implemented to find out if impurity is present in sugar cubes or powders so far. Several high end imaging techniques with X-ray scanners have been used to check the quality of the sugar. In this present study, without disturbing the physical nature of sugar, we have simply used the dielectric property analysis to check the purity of the sugar. This method can detect even infinitesimal amounts of impurity present in sugar with good accuracy. The positional accuracy is derived using artificial neural networks, which is been trained with various capacitance values when the impurity is present and gives the details on the change in capacitance value as the impurity position changes.

  12. Electrochemical and Capacitive Properties of Carbon Dots/Reduced Graphene Oxide Supercapacitors

    Directory of Open Access Journals (Sweden)

    Yong-Qiang Dang

    2016-11-01

    Full Text Available There is much recent interest in graphene-based composite electrode materials because of their excellent mechanical strengths, high electron mobilities, and large specific surface areas. These materials are good candidates for applications in supercapacitors. In this work, a new graphene-based electrode material for supercapacitors was fabricated by anchoring carbon dots (CDs on reduced graphene oxide (rGO. The capacitive properties of electrodes in aqueous electrolytes were systematically studied by galvanostatic charge-discharge measurements, cyclic voltammetry, and electrochemical impedance spectroscopy. The capacitance of rGO was improved when an appropriate amount of CDs were added to the material. The CD/rGO electrode exhibited a good reversibility, excellent rate capability, fast charge transfer, and high specific capacitance in 1 M H2SO4. Its capacitance was as high as 211.9 F/g at a current density of 0.5 A/g. This capacitance was 74.3% higher than that of a pristine rGO electrode (121.6 F/g, and the capacitance of the CD/rGO electrode retained 92.8% of its original value after 1000 cycles at a CDs-to-rGO ratio of 5:1.

  13. Carbon flow electrodes for continuous operation of capacitive deionization and capacitive mixing energy generation

    NARCIS (Netherlands)

    Porada, S.; Hamelers, H.V.M.; Bryjak, M.; Presser, V.; Biesheuvel, P.M.; Weingarth, D.

    2014-01-01

    Capacitive technologies, such as capacitive deionization and energy harvesting based on mixing energy (“capmix” and “CO2 energy”), are characterized by intermittent operation: phases of ion electrosorption from the water are followed by system regeneration. From a system application point of view, c

  14. Switching Properties of sub-100 nm Perpendicular Magnetic Tunnel Junctions

    Science.gov (United States)

    Tryputen, Larysa; Piotrowski, Stephan; Bapna, Mukund; Chien, Chia-Ling; Wang, Weigang; Majetich, Sara; Ross, Caroline

    2015-03-01

    Perpendicular magnetic tunnel junctions (p-MTJs) have great potential for realizing high-density non-volatile memory and logic devices. It is critical to solve scalability problem to implement such devices, to achieve low resistance area and to reduce switching current density while maintaining thermal stability. We present our recent results on fabrication of high resolution Ta/CoFeB/MgO/CoFeB/Ta p-MTJ devices and characterization of their switching properties as well as topography and current mapping by using nanoscale Conductive Atomic Force Microscopy. Our patterning method is based on using hydrogen silsesquioxane resist mask combined with ion beam etching. It allows to fabricate p-MTJ devices down to 40 nm in diameter while maintaining the magnetic quality of the multilayers. Repeatable, consistent switching behaviour has been observed in the obtained p-MTJ devices of 500 nm down to 40 nm with 10 - 800 mV voltage applied. Switching field increased as device diameter decreased, from 580 Oe at 500 nm (MR = 10%) to 410 Oe at 80 nm (MR = 9%). We discuss the effect of device sizes on the switching properties. This work was supported in part by C-SPIN, one of the six centers of STARnet, a Semiconductor Research Corporation Program sponsored by MARCO and DARPA and in part through the National Science Foundation through NCN-Needs Program, Contract 12207020-EEC.

  15. Enhanced capacitive properties of commercial activated carbon by re-activation in molten carbonates

    Science.gov (United States)

    Lu, Beihu; Xiao, Zuoan; Zhu, Hua; Xiao, Wei; Wu, Wenlong; Wang, Dihua

    2015-12-01

    Simple, affordable and green methods to improve capacitive properties of commercial activated carbon (AC) are intriguing since ACs possess a predominant role in the commercial supercapacitor market. Herein, we report a green reactivation of commercial ACs by soaking ACs in molten Na2CO3-K2CO3 (equal in mass ratios) at 850 °C combining the merits of both physical and chemical activation strategies. The mechanism of molten carbonate treatment and structure-capacitive activity correlations of the ACs are rationalized. Characterizations show that the molten carbonate treatment increases the electrical conductivity of AC without compromising its porosity and wettability of electrolytes. Electrochemical tests show the treated AC exhibited higher specific capacitance, enhanced high-rate capability and excellent cycle performance, promising its practical application in supercapacitors. The present study confirms that the molten carbonate reactivation is a green and effective method to enhance capacitive properties of ACs.

  16. Hysteretic self-oscillating bandpass current mode control for Class D audio amplifiers driving capacitive transducers

    DEFF Research Database (Denmark)

    Nielsen, Dennis; Knott, Arnold; Andersen, Michael A. E.

    2013-01-01

    A hysteretic self-oscillating bandpass current mode control (BPCM) scheme for Class D audio amplifiers driving capacitive transducers are presented. The scheme provides excellent stability margins and low distortion over a wide range of operating conditions. Small-signal behavior of the amplifier...... the rules of electrostatics have been known as very interesting alternatives to the traditional inefficient electrodynamic transducers. When driving capacitive transducers from a Class D audio amplifier the high impedance nature of the load represents a key challenge. The BPCM control scheme ensures a flat...... is analysis through transfer function based linear control methodology. Measurements are performed on a single-ended ± 300 V half-bridge amplifier driving a capacitive load of 100 nF. Total Harmonic Distortion plus noise (THD+N) below 0.1 % are reported. Transducers representing a capacitive load and obeying...

  17. Micromachined capacitive transducer arrays for intravascular ultrasound

    Science.gov (United States)

    Degertekin, F. Levent; Guldiken, R. Oytun; Karaman, Mustafa

    2005-01-01

    Intravascular ultrasound (IVUS) imaging has become an essential imaging modality for the effective diagnosis and treatment of cardiovascular diseases during the past decade enabled by innovative applications of piezoelectric transducer technology. The limitations in the manufacture and performance of the same piezoelectric transducers have also impeded the improvement of IVUS for emerging clinically important applications such as forward viewing arrays for guiding interventions and high resolution imaging of arterial structure such as vulnerable plaque and fibrous cap, and also implementation of techniques such as harmonic imaging of the tissue and of the contrast agents. Capacitive micromachined ultrasonic transducer (CMUT) technology shows great potential for transforming IVUS not only to satisfy these clinical needs but also to open up possibilities for low-cost imaging devices integrated to therapeutic tools. We have developed manufacturing processes with a maximum process temperature of 250°C to build CMUTs on the same silicon chip with integrated electronics. Using these processes we fabricated CMUT arrays suitable for forward viewing IVUS in the 10-20MHz range. We characterized these array elements in terms of pulse-echo response, radiation pattern measurements and demonstrated its volumetric imaging capabilities on various imaging targets.

  18. Instabilities in a capacitively coupled oxygen plasma

    Energy Technology Data Exchange (ETDEWEB)

    Küllig, C., E-mail: kuellig@physik.uni-greifswald.de; Wegner, Th., E-mail: physics@thwegner.com; Meichsner, J., E-mail: meichsner@physik.uni-greifswald.de [Institute of Physics, University of Greifswald, Felix-Hausdorff-Str. 6, 17489 Greifswald (Germany)

    2015-04-15

    Periodic fluctuations in the frequency range from 0.3 to 3 kHz were experimentally investigated in capacitively coupled radio frequency (13.56 MHz) oxygen plasma. The Gaussian beam microwave interferometry directly provides the line integrated electron density fluctuations. A system of two Langmuir probes measured the floating potential spatially (axial, radial) and temporally resolved. Hence, the floating potential fluctuation development is mapped within the discharge volume and provides a kind of discharge breathing and no wave propagation. Finally, it was measured the optical emission pattern of atomic oxygen during the fluctuation as well as the RF phase resolved optical emission intensity at selected phase position of the fluctuation by an intensified charge-coupled device camera. The deduced excitation rate pattern reveals the RF sheath dynamics and electron heating mechanisms, which is changing between low and high electronegativity during a fluctuation cycle. A perturbation calculation was taken into account using a global model with 15 elementary collision processes in the balance equations for the charged plasma species (O{sub 2}{sup +}, e, O{sup −}, O{sub 2}{sup −}) and a harmonic perturbation. The calculated frequencies agree with the experimentally observed frequencies. Whereby, the electron attachment/detachment processes are important for the generation of this instability.

  19. Hydrogen atom kinetics in capacitively coupled plasmas

    Science.gov (United States)

    Nunomura, Shota; Katayama, Hirotaka; Yoshida, Isao

    2017-05-01

    Hydrogen (H) atom kinetics has been investigated in capacitively coupled very high frequency (VHF) discharges at powers of 16-780 mW cm-2 and H2 gas pressures of 0.1-2 Torr. The H atom density has been measured using vacuum ultra violet absorption spectroscopy (VUVAS) with a micro-discharge hollow cathode lamp as a VUV light source. The measurements have been performed in two different electrode configurations of discharges: conventional parallel-plate diode and triode with an intermediate mesh electrode. We find that in the triode configuration, the H atom density is strongly reduced across the mesh electrode. The H atom density varies from ˜1012 cm-3 to ˜1010 cm-3 by crossing the mesh with 0.2 mm in thickness and 36% in aperture ratio. The fluid model simulations for VHF discharge plasmas have been performed to study the H atom generation, diffusion and recombination kinetics. The simulations suggest that H atoms are generated in the bulk plasma, by the electron impact dissociation (e + H2 \\to e + 2H) and the ion-molecule reaction (H2 + + H2 \\to {{{H}}}3+ + H). The diffusion of H atoms is strongly limited by a mesh electrode, and thus the mesh geometry influences the spatial distribution of the H atoms. The loss of H atoms is dominated by the surface recombination.

  20. Ion channels, phosphorylation and mammalian sperm capacitation.

    Science.gov (United States)

    Visconti, Pablo E; Krapf, Dario; de la Vega-Beltrán, José Luis; Acevedo, Juan José; Darszon, Alberto

    2011-05-01

    Sexually reproducing animals require an orchestrated communication between spermatozoa and the egg to generate a new individual. Capacitation, a maturational complex phenomenon that occurs in the female reproductive tract, renders spermatozoa capable of binding and fusing with the oocyte, and it is a requirement for mammalian fertilization. Capacitation encompasses plasma membrane reorganization, ion permeability regulation, cholesterol loss and changes in the phosphorylation state of many proteins. Novel tools to study sperm ion channels, image intracellular ionic changes and proteins with better spatial and temporal resolution, are unraveling how modifications in sperm ion transport and phosphorylation states lead to capacitation. Recent evidence indicates that two parallel pathways regulate phosphorylation events leading to capacitation, one of them requiring activation of protein kinase A and the second one involving inactivation of ser/thr phosphatases. This review examines the involvement of ion transporters and phosphorylation signaling processes needed for spermatozoa to achieve capacitation. Understanding the molecular mechanisms leading to fertilization is central for societies to deal with rising male infertility rates, to develop safe male gamete-based contraceptives and to preserve biodiversity through better assisted fertilization strategies.

  1. Ion channels, phosphorylation and mammalian sperm capacitation

    Institute of Scientific and Technical Information of China (English)

    Pablo E Visconti; Dario Krapf; José Luis de la Vega-Beltrán; Juan José Acevedo; Alberto Darszon

    2011-01-01

    Sexually reproducing animals require an orchestrated communication between spermatozoa and the egg to generate a new individual. Capacitation, a maturational complex phenomenon that occurs in the female reproductive tract, renders spermatozoa capable of binding and fusing with the oocyte, and it is a requirement for mammalian fertilization. Capacitation encompasses plasma membrane reorganization, ion permeability regulation, cholesterol loss and changes in the phosphorylation state of many proteins. Novel tools to study sperm ion channels, image intracellular ionic changes and proteins with better spatial and temporal resolution, are unraveling how modifications in sperm ion transport and phosphorylation states lead to capacitation. Recent evidence indicates that two parallel pathways regulate phosphorylation events leading to capacitation, one of them requiring activation of protein kinase A and the second one involving inactivation of ser/thr phosphatases. This review examines the involvement of ion transporters and phosphorylation signaling processes needed for spermatozoa to achieve capacitation. Understanding the molecular mechanisms leading to fertilization is central for societies to deal with rising male infertility rates, to develop safe male gamete-based contraceptives and to preserve biodiversity through better assisted fertilization strategies.

  2. Design of dielectric loss factor measurement with DSP for high voltage capacitive apparatus%基于DSP的高压容型电气设备介质损耗测量仪设计

    Institute of Scientific and Technical Information of China (English)

    廖建庆

    2012-01-01

    针对电气设备易受电网频率波动和非整周期采样的影响,造成介质损耗因数tan δ测量精度和分辨率偏低的问题,提出一种基于DSP的高压电气设备介质损耗因数测量仪设计方案.将归一化工频电压信号和电流信号分别移相90°构成Hilbert变换对,再将两组复信号构造新的复三角信号模型实现对采样信号的去角频率处理.介绍了tanδ测量原理,给出了硬件各主要模块和系统软件实现方案.试验结果表明:该测量装置有效地解决了由于频率波动引起的非同步采样和非整周期截断问题,tan δ实际测量的绝对误差小于0.000 1,具有一定的实际推广价值.%Electrical equipment is vulnerable to fluctuations in the network frequency and non-integral period truncation conditions, and caused the dielectric loss factor measurement accuracy and resolution is low. An approach of dielectric loss factor measurement with DSP for high voltage capacitive apparatus is proposed. A Hilbert transform is build through moving voltage or current signals to 90 rad. The two signals are constructed a new complex triangle signal model. Introduced the dielectric loss factor measuring principle . The main modules and hardware system software scheme was given. Simulation and test results show that this algorithm reduced influence of non-synchronized sampling and non-integral period truncation caused by fluctuations in the network frequency. The absolute error of the dielectric loss factor is less than 0. 000 1. It has practical application value.

  3. The Design of Phase-Locked-Loop Circuit for Precision Capacitance Micrometer

    Directory of Open Access Journals (Sweden)

    Li Shujie

    2016-01-01

    Full Text Available High precision non-contact micrometer is normally divided into three categories: inductance micrometer, capacitance micrometer and optical interferometer micrometer. The capacitance micrometer is widely used because it has high performance to price ratio. With the improvement of automation level, precision of capacitance micrometer is required higher and higher. Generally, capacitance micrometer consists of the capacitance sensor, capacitance/voltage conversion circuit, and modulation and demodulation circuits. However, due to the existing of resistors, capacitors and other components in the circuit, the phase shift of the carrier signal and the modulated signal might occur. In this case, the specific value of phase shift cannot be determined. Therefore, error caused by the phase shift cannot be eliminated. This will reduce the accuracy of micrometer. In this design, in order to eliminate the impact of the phase shift, the phase-locked-loop (PLL circuit is employed. Through the experiment, the function of tracking the input signal phase and frequency is achieved by the phase-locked-loop circuit. This signal processing method can also be applied to tuber electrical resistance tomography system and other precision measurement circuit.

  4. Effect of reducing system on capacitive behavior of reduced graphene oxide film: Application for supercapacitor

    Energy Technology Data Exchange (ETDEWEB)

    Akbi, Hamdane; Yu, Lei; Wang, Bin; Liu, Qi [Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Wang, Jun, E-mail: zhqw1888@sohu.com [Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Institute of Advanced Marine Materials, Harbin Engineering University, Harbin 150001 (China); Liu, Jingyuan; Song, Dalei [Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Sun, Yanbo [State Key Laboratory of Theoretical and Computational Chemistry, Institute of Theoretical Chemistry, Jilin University, Changchun 130023 (China); Liu, Lianhe [Key Laboratory of Superlight Material and Surface Technology, Ministry of Education, Harbin Engineering University, Harbin 150001 (China); Institute of Advanced Marine Materials, Harbin Engineering University, Harbin 150001 (China)

    2015-01-15

    To determine the best chemical reduction of graphene oxide film with hydriodic acid that gives maximum energy and power density, we studied the effect of two reducing systems, hydriodic acid/water and hydriodic acid/acetic acid, on the morphology and electrochemical features of reduced graphene oxide film. Using acetic acid as solvent results in high electrical conductivity (5195 S m{sup −1}), excellent specific capacitance (384 F g{sup −1}) and good cyclic stability (about 98% of its initial response after 4000 cycles). Using water as a solvent, results in an ideal capacitive behavior and excellent cyclic stability (about 6% increase of its initial response after 2100 cycles). - Graphical abstract: The choice of reducing system determines the morphology and structure of the chemically reduced graphene film and, as a result, affects largely the capacitive behavior. - Highlights: • The structure of the graphene film has a pronounced effect on capacitive behavior. • The use of water/HI as reducing system results in an ideal capacitive behavior. • The use of acetic acid/HI as reducing system results in a high specific capacitance.

  5. Investigation on the Sensitivity Distribution in Electrical Capacitance Tomography System

    Directory of Open Access Journals (Sweden)

    Pan Jiang

    2013-07-01

    Full Text Available The gas-solid-liquid three-phase flow is a very complicated flow pattern in pipeline transportation. By using electrical capacitance tomography (ETC it can acquire the permittivity distribution of the multi-phase. The sensitivity distribution in ETC may affect the analysis of the permittivity distribution of the multi-phase. However, very limited work has been done in this issue. In order to investigate the sensitivity distribution in ETC, this paper employs the finite element method (FEM to establish the principle and components of ECT. The FEM model of the sensitivity distribution as a function of the inter-electrode capacitance was discussed. Simulation tests were carried out to calculate the charge on the electrode pairs to access the potential distribution of the ETC. The analysis results show that the dielectric have great influence on the capacitance value and small distance between the electrode pair and the sensitivity field will produce high sensitivity value. Hence, the findings of this work can provide reference for the design of ECT in practice.

  6. Plasma Treated Active Carbon for Capacitive Deionization of Saline Water

    Directory of Open Access Journals (Sweden)

    Aiping Zeng

    2017-01-01

    Full Text Available The plasma treatment on commercial active carbon (AC was carried out in a capacitively coupled plasma system using Ar + 10% O2 at pressure of 4.0 Torr. The RF plasma power ranged from 50 W to 100 W and the processing time was 10 min. The carbon film electrode was fabricated by electrophoretic deposition. Micro-Raman spectroscopy revealed the highly increased disorder of sp2 C lattice for the AC treated at 75 W. An electrosorption capacity of 6.15 mg/g was recorded for the carbon treated at 75 W in a 0.1 mM NaCl solution when 1.5 V was applied for 5 hours, while the capacity of the untreated AC was 1.01 mg/g. The plasma treatment led to 5.09 times increase in the absorption capacity. The jump of electrosorption capacity by plasma treatment was consistent with the Raman spectra and electrochemical double layer capacitance. This work demonstrated that plasma treatment was a potentially efficient approach to activating biochar to serve as electrode material for capacitive deionization (CDI.

  7. DNA Nucleotides Detection via capacitance properties of Graphene

    Science.gov (United States)

    Khadempar, Nahid; Berahman, Masoud; Yazdanpanah, Arash

    2016-05-01

    In the present paper a new method is suggested to detect the DNA nucleotides on a first-principles calculation of the electronic features of DNA bases which chemisorbed to a graphene sheet placed between two gold electrodes in a contact-channel-contact system. The capacitance properties of graphene in the channel are surveyed using non-equilibrium Green's function coupled with the Density Functional Theory. Thus, the capacitance properties of graphene are theoretically investigated in a biological environment, and, using a novel method, the effect of the chemisorbed DNA nucleotides on electrical charges on the surface of graphene is deciphered. Several parameters in this method are also extracted including Electrostatic energy, Induced density, induced electrostatic potential, Electron difference potential and Electron difference density. The qualitative and quantitative differences among these parameters can be used to identify DNA nucleotides. Some of the advantages of this approach include its ease and high accuracy. What distinguishes the current research is that it is the first experiment to investigate the capacitance properties of gaphene changes in the biological environment and the effect of chemisorbed DNA nucleotides on the surface of graphene on the charge.

  8. 3D Alignment of nanowriters using fringe capacitance

    Science.gov (United States)

    Lally, Richard; Stark, Thomas; Reeves, Jeremy; Barrett, Lawrence; Bishop, David

    With the introduction of atomic calligraphy, high resolution nanoscale structures can be fabricated rapidly over a large surface area. This reliable, chemically stable and cost effective nanoscale writing method can be applied to a number of interesting applications. One specific application of this writing approach is to fabricate metamaterials, a process that requires precise alignment of the MEMS and substrate. Here we present a MEMS based solution coupling the well-studied comb drive capacitance effects with the less predictable close order fringe effects. The combined capacitance allows for precise measurements in the nanometer range. Using two sets of orthogonal static MEMS comb drives, the capacitance is used to discern the x, y, and z spatial displacement from the substrate. The unique SOI wafer is prepared creating a periodic array of silicon pillars. Placement of additional MEMS comb drives at the MEMS device edges will allow stage corrections for tip, tilt and rotational alignment thereby reducing the effects generated by variations in wafer thickness and surface smoothness. This work is funded by the DARPA A2P Program.

  9. Magnetron sputtering deposition of [FePt/Ag]n multilayers for perpendicular recording

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    [FePt/Ag]n multilayers were deposited on glass substrates by RF magnetron sputtering and ex situ annealed at 550℃ for 30 min. The effects of inserted Ag layer thickness and the number of bilayer repetitions (n) on the structure and magnetic properties of the multilayers were investigated. It was found that the difference between in-plane and out-of-plane coercivities varied with an increase of inserted Ag layer thickness in the [FePt 2 nm/Ag x nm]10 multilayers. The ratio of out-of-plane coercivity to in-plane coercivity reached the maximum value with the Ag layer thickness of 5 nm, indicating that the Ag layer thickness plays an important role in obtaining perpendicular orientation. For the [FePt 2 nm/Ag 5 nm]n multilayers, perpendicular orientation is also influenced by n. The maximum value of the ratio of out-of-plane coercivity to in-plane coercivity appeared when n was given as 8. It was found that the [FePt 2 nm/Ag 5 nm]8 had a high perpendicular coercivity of 520 kA/m and a low in-plane one of 88 kA/m, which shows a strong perpendicular anisotropy.

  10. Carbon with ultrahigh capacitance when graphene paper meets K3Fe(CN)6

    Science.gov (United States)

    Chen, Kunfeng; Liu, Fei; Xue, Dongfeng; Komarneni, Sridhar

    2014-12-01

    For the first time, we have shown a novel supercapacitor system with a graphene paper electrode in the redox-electrolyte of K3Fe(CN)6 based on the system-level design principle. By combining electric double-layer capacitance and pseudocapacitance, the specific capacitance could be increased 5-fold compared with the conventional electrode-electrolyte system. This large improvement is attributed to the additional redox reactions on the graphene paper electrode via the constituent ions of K3Fe(CN)6 in the redox-electrolyte, during which the discharge process is highly enhanced. More importantly, the potential interval could reach as high as 1.6 V beyond the limited operating voltage of water (~1.23 V). After 5000 continuous cycles, 94% of the initial capacitance was retained. The newly designed novel supercapacitor system is binder-free, conducting additive-free and can deliver higher capacitance. This designed graphene-paper-electrode/redox-electrolyte system can provide a versatile strategy for high-capacitance supercapacitor systems.For the first time, we have shown a novel supercapacitor system with a graphene paper electrode in the redox-electrolyte of K3Fe(CN)6 based on the system-level design principle. By combining electric double-layer capacitance and pseudocapacitance, the specific capacitance could be increased 5-fold compared with the conventional electrode-electrolyte system. This large improvement is attributed to the additional redox reactions on the graphene paper electrode via the constituent ions of K3Fe(CN)6 in the redox-electrolyte, during which the discharge process is highly enhanced. More importantly, the potential interval could reach as high as 1.6 V beyond the limited operating voltage of water (~1.23 V). After 5000 continuous cycles, 94% of the initial capacitance was retained. The newly designed novel supercapacitor system is binder-free, conducting additive-free and can deliver higher capacitance. This designed graphene

  11. Perpendicular magnetic tunnel junction with enhanced anisotropy obtained by utilizing an Ir/Co interface

    Science.gov (United States)

    Yakushiji, Kay; Kubota, Hitoshi; Fukushima, Akio; Yuasa, Shinji

    2016-01-01

    A highly scalable perpendicularly magnetized storage layer of a spin-torque-switching magnetic random-access memory (STT-MRAM) was developed. This storage layer attains a perpendicular magnetic anisotropy (PMA) of above 0.9 erg/cm2 at a thickness of 2 nm. Such high PMA is suitable for pushing STT-MRAM technology beyond the 20 nm node. The key was to realize dual interfacial PMA at both the Ir/Co and FeB/MgO interfaces in the united structure of the storage layer. While a high PMA was retained, a high magnetoresistance ratio (100%) and a low resistance-area product (3.0 Ω µm2) were also achieved.

  12. Influence of thermal agitation on the electric field induced precessional magnetization reversal with perpendicular easy axis

    Directory of Open Access Journals (Sweden)

    Hongguang Cheng

    2013-12-01

    Full Text Available We investigated the influence of thermal agitation on the electric field induced precessional magnetization switching probability with perpendicular easy axis by solving the Fokker-Planck equation numerically with finite difference method. The calculated results show that the thermal agitation during the reversal process crucially influences the switching probability. The switching probability can be achieved is only determined by the thermal stability factor Δ of the free layer, it is independent on the device dimension, which is important for the high density device application. Ultra-low error rate down to the order of 10−9 can be achieved for the device of thermal stability factor Δ of 40. Low damping factor α material should be used for the free layer for high reliability device applications. These results exhibit potential of electric field induced precessional magnetization switching with perpendicular easy axis for ultra-low power, high speed and high density magnetic random access memory (MRAM applications.

  13. Influence of thermal agitation on the electric field induced precessional magnetization reversal with perpendicular easy axis

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Hongguang, E-mail: chenghg7932@gmail.com; Deng, Ning [Institute of Microelectronics, Tsinghua University, Beijing 100084 (China)

    2013-12-15

    We investigated the influence of thermal agitation on the electric field induced precessional magnetization switching probability with perpendicular easy axis by solving the Fokker-Planck equation numerically with finite difference method. The calculated results show that the thermal agitation during the reversal process crucially influences the switching probability. The switching probability can be achieved is only determined by the thermal stability factor Δ of the free layer, it is independent on the device dimension, which is important for the high density device application. Ultra-low error rate down to the order of 10{sup −9} can be achieved for the device of thermal stability factor Δ of 40. Low damping factor α material should be used for the free layer for high reliability device applications. These results exhibit potential of electric field induced precessional magnetization switching with perpendicular easy axis for ultra-low power, high speed and high density magnetic random access memory (MRAM) applications.

  14. Polydimethylsiloxane as an elastic material applied in a capacitive accelerometer

    Science.gov (United States)

    Lötters, Joost C.; Olthuis, Wouter; Veltink, Peter H.; Bergveld, Piet

    1996-03-01

    Polydimethylsiloxane is a silicone rubber. It has a unique flexibility, resulting in one of the lowest glass-transition temperatures of any polymer. Furthermore, it shows a low elasticity change versus temperature, a high thermal stability, chemical inertness, dielectric stability, shear stability and high compressibility. Because of its high flexibility and the very low drift of its properties with time and temperature, polydimethylsiloxane could be well suited for mechanical sensors, such as accelerometers. A novel capacitive accelerometer with polydimethylsiloxane layers as springs has been realized. The obtained measurement results are promising and show a good correspondence with the theoretical values.

  15. Perpendicularly Aligned, Anion Conducting Nanochannels in Block Copolymer Electrolyte Films

    Energy Technology Data Exchange (ETDEWEB)

    Arges, Christopher G.; Kambe, Yu; Suh, Hyo Seon; Ocola, Leonidas E.; Nealey, Paul F.

    2016-03-08

    Connecting structure and morphology to bulk transport properties, such as ionic conductivity, in nanostructured polymer electrolyte materials is a difficult proposition because of the challenge to precisely and accurately control order and the orientation of the ionic domains in such polymeric films. In this work, poly(styrene-block-2-vinylpyridine) (PSbP2VP) block copolymers were assembled perpendicularly to a substrate surface over large areas through chemical surface modification at the substrate and utilizing a versatile solvent vapor annealing (SVA) technique. After block copolymer assembly, a novel chemical vapor infiltration reaction (CVIR) technique selectively converted the 2-vinylpyridine block to 2-vinyl n-methylpyridinium (NMP+ X-) groups, which are anion charge carriers. The prepared block copolymer electrolytes maintained their orientation and ordered nanostructure upon the selective introduction of ion moieties into the P2VP block and post ion-exchange to other counterion forms (X- = chloride, hydroxide, etc.). The prepared block copolymer electrolyte films demonstrated high chloride ion conductivities, 45 mS cm(-1) at 20 degrees C in deionized water, the highest chloride ion conductivity for anion conducting polymer electrolyte films. Additionally, straight-line lamellae of block copolymer electrolytes were realized using chemoepitaxy and density multiplication. The devised scheme allowed for precise and accurate control of orientation of ionic domains in nanostructured polymer electrolyte films and enables a platform for future studies that examines the relationship between polymer electrolyte structure and ion transport.

  16. Effect of soft underlayer magnetic anisotropy on perpendicular recording process

    Science.gov (United States)

    Lim, C. K.; Kim, E. S.; Yoon, S. Y.; Kong, S. H.; Lee, H. S.; Oh, H. S.; Kim, Y. S.

    2007-03-01

    The presence of the soft magnetic underlayer (SUL) in perpendicular magnetic recording (PMR) media is essential for the application. It is commonly understood that the SUL provides the return flux path and enhances the writing field by enhancing the recording field from the write pole. However, SUL increases the magnetic noise during the read back process due to magnetic domain walls in the SUL. Hence, it is common to grow SUL with large uniaxial or unidirectional magnetic anisotropy field ( H k) to reduce domain wall noise. In this paper, we explore the effect of increasing SUL H k on the recording process. We studied this effect by using the finite element micromagnetic simulation. Our simulation results show that the contribution of SUL to the writing field amplitude is reduced with increasing H k. This reduction in magnetic field from high H k SUL actually improves the recording performance due to the better field gradient at SUL. The simulation results are qualitatively consistent with the actual experimental data obtained from the Guzik measurement.

  17. Artificially engineered Heusler ferrimagnetic superlattice exhibiting perpendicular magnetic anisotropy

    Science.gov (United States)

    Ma, Q. L.; Zhang, X. M.; Miyazaki, T.; Mizukami, S.

    2015-01-01

    To extend density limits in magnetic recording industry, two separate strategies were developed to build the storage bit in last decade, introduction of perpendicular magnetic anisotropy (PMA) and adoption of ferrimagnetism/antiferromagnetism. Meanwhile, these properties significantly improve device performance, such as reducing spin-transfer torque energy consumption and decreasing signal-amplitude-loss. However, materials combining PMA and antiferromagnetism rather than transition-metal/rare-earth system were rarely developed. Here, we develop a new type of ferrimagnetic superlattice exhibiting PMA based on abundant Heusler alloy families. The superlattice is formed by [MnGa/Co2FeAl] unit with their magnetizations antiparallel aligned. The effective anisotropy (Kueff) over 6 Merg/cm3 is obtained, and the SL can be easily built on various substrates with flexible lattice constants. The coercive force, saturation magnetization and Kueff of SLs are highly controllable by varying the thickness of MnGa and Co2FeAl layers. The SLs will supply a new choice for magnetic recording and spintronics memory application such as magnetic random access memory.

  18. Electric field scales at quasi-perpendicular shocks

    Directory of Open Access Journals (Sweden)

    S. N. Walker

    2004-07-01

    Full Text Available This paper investigates the short scale structures that are observed in the electric field during crossings of the quasi-perpendicular bow shock using data from the Cluster satellites. These structures exhibit large amplitudes, as high as 70 m Vm-1 and so make a significant contribution to the overall change in potential at the shock front. It is shown that the scale size of these short-lived electric field structures is of the order of a few cpe. The relationships between the scale size and the upstream Mach number and θBn are studied. It is found that the scale size of these structures decreases with increasing plasma β and as θBn→90°. The amplitude of the spikes remains fairly constant with increasing Ma and appears to increase as θBn→90°.

  19. Cross-scale coupling at a perpendicular collisionless shock

    CERN Document Server

    Umeda, Takayuki; Yamazaki, Ryo; 10.1016/j.pss.2010.01.007

    2011-01-01

    A full particle simulation study is carried out on a perpendicular collisionless shock with a relatively low Alfven Mach number (M_A=5). In the present study, we have performed a two-dimensional (2D) electromagnetic full particle simulation with a "shock-rest-frame model". The simulation domain is taken to be larger than the ion inertial length in order to include full kinetics of both electrons and ions. The present simulation result has confirmed the transition of shock structures from the cyclic self-reformation to the quasi-stationary shock front. During the transition, electrons and ions are thermalized in the direction parallel to the shock magnetic field. Ions are thermalized by low-frequency electromagnetic waves (or rippled structures) excited by strong ion temperature anisotropy at the shock foot, while electrons are thermalized by high-frequency electromagnetic waves (or whistler mode waves) excited by electron temperature anisotropy at the shock overshoot. Ion acoustic waves are also excited at th...

  20. Tunnel Junction with Perpendicular Magnetic Anisotropy: Status and Challenges

    Directory of Open Access Journals (Sweden)

    Mengxing Wang

    2015-08-01

    Full Text Available Magnetic tunnel junction (MTJ, which arises from emerging spintronics, has the potential to become the basic component of novel memory, logic circuits, and other applications. Particularly since the first demonstration of current induced magnetization switching in MTJ, spin transfer torque magnetic random access memory (STT-MRAM has sparked a huge interest thanks to its non-volatility, fast access speed, and infinite endurance. However, along with the advanced nodes scaling, MTJ with in-plane magnetic anisotropy suffers from modest thermal stability, high power consumption, and manufactural challenges. To address these concerns, focus of research has converted to the preferable perpendicular magnetic anisotropy (PMA based MTJ, whereas a number of conditions still have to be met before its practical application. This paper overviews the principles of PMA and STT, where relevant issues are preliminarily discussed. Centering on the interfacial PMA in CoFeB/MgO system, we present the fundamentals and latest progress in the engineering, material, and structural points of view. The last part illustrates potential investigations and applications with regard to MTJ with interfacial PMA.

  1. Artificially engineered Heusler ferrimagnetic superlattice exhibiting perpendicular magnetic anisotropy.

    Science.gov (United States)

    Ma, Q L; Zhang, X M; Miyazaki, T; Mizukami, S

    2015-01-19

    To extend density limits in magnetic recording industry, two separate strategies were developed to build the storage bit in last decade, introduction of perpendicular magnetic anisotropy (PMA) and adoption of ferrimagnetism/antiferromagnetism. Meanwhile, these properties significantly improve device performance, such as reducing spin-transfer torque energy consumption and decreasing signal-amplitude-loss. However, materials combining PMA and antiferromagnetism rather than transition-metal/rare-earth system were rarely developed. Here, we develop a new type of ferrimagnetic superlattice exhibiting PMA based on abundant Heusler alloy families. The superlattice is formed by [MnGa/Co2FeAl] unit with their magnetizations antiparallel aligned. The effective anisotropy (K(u)(eff)) over 6 Merg/cm(3) is obtained, and the SL can be easily built on various substrates with flexible lattice constants. The coercive force, saturation magnetization and K(u)(eff) of SLs are highly controllable by varying the thickness of MnGa and Co2FeAl layers. The SLs will supply a new choice for magnetic recording and spintronics memory application such as magnetic random access memory.

  2. Microphonics in biopotential measurements with capacitive electrodes.

    Science.gov (United States)

    Luna-Lozano, Pablo S; Pallas-Areny, Ramon

    2010-01-01

    Biopotential measurements with capacitive electrodes do not need any direct contact between electrode and skin, which saves the time devoted to expose and prepare the contact area when measuring with conductive electrodes. However, mechanical vibrations resulting from physiological functions such as respiration and cardiac contraction can change the capacitance of the electrode and affect the recordings. This transformation of mechanical vibrations into undesired electric signals is termed microphonics. We have evaluated microphonics in capacitive ECG recordings obtained from a dressed subject seated on a common chair with electrodes placed on the front side of the backrest of the chair. Depending on the softness of the backrest, the recordings may be clearly affected by the displacement of the thorax back wall due to the respiration and to the heart's mechanical activity.

  3. Carbon nanofiber supercapacitors with large areal capacitances

    KAUST Repository

    McDonough, James R.

    2009-01-01

    We develop supercapacitor (SC) devices with large per-area capacitances by utilizing three-dimensional (3D) porous substrates. Carbon nanofibers (CNFs) functioning as active SC electrodes are grown on 3D nickel foam. The 3D porous substrates facilitate a mass loading of active electrodes and per-area capacitance as large as 60 mg/ cm2 and 1.2 F/ cm2, respectively. We optimize SC performance by developing an annealing-free CNF growth process that minimizes undesirable nickel carbide formation. Superior per-area capacitances described here suggest that 3D porous substrates are useful in various energy storage devices in which per-area performance is critical. © 2009 American Institute of Physics.

  4. Role of the oviduct in sperm capacitation.

    Science.gov (United States)

    Rodriguez-Martinez, H

    2007-09-01

    Following insemination of spermatozoa pre-ovulation, the mammalian oviduct ensures, by the formation of a functional sperm reservoir (SR), that suitable (low) numbers of viable and potentially fertile spermatozoa are available for fertilization at the ampullary isthmic junction (AIJ). As ovulation approaches, a proportion of the SR-stored spermatozoa is continuously distributed towards the AIJ and individually activated leading to step-wise capacitation and the attainment of hyperactivated motility. This paper reviews in vivo changes in the intra-luminal milieu of the oviduct of pigs and cows, in particular the SR and the AIJ which relate to the modulation of sperm capacitation around spontaneous ovulation. In vivo, most viable spermatozoa in the pre-ovulatory SR are uncapacitated. Capacitation rates significantly increase after ovulation, apparently not massively but concurrent with the individual, continuous sperm dislocation from the SR. Bicarbonate, whose levels differ between the SR and the AIJ, appears as the common primary effector of the membrane destabilizing changes that encompasses the first stages of capacitation. Sperm activation can be delayed or even reversed by co-incubation with membrane proteins of the tubal lining, isthmic fluid or specific tubal glycosaminoglycans, such as hyaluronan. Although the pattern of response to in vitro induction of sperm activation - capacitation in particular - is similar for all spermatozoa, the capacity and speed of the response is very individual. Such diversity in responsiveness among spermatozoa insures full sperm viability before ovulation and the presence of spermatozoa at different stages of capacitation at the AIJ, thus maximizing the chances of normal fertilization.

  5. Role of ions and ion channels in capacitation and acrosome reaction of spermatozoa

    Institute of Scientific and Technical Information of China (English)

    SharadBPurohit; MaliniLaloraya; G.pradeepkumar

    1999-01-01

    Capacitation and acrosome reaction are important prerequisites of the fertilization process. Capacitation is a highlycomplex phenomenon occurring in the female genital tract, rendering the spermatozoa capable of binding and fusionwith the oocyte. During capacitation various biochemical and biophysical changes occur in the spermatozoa and thespermatozoal membranes. Ions and ion channels also play important roles in governing the process of capacitation bychanging the fluxes of different ions which in turn controls various characteristics of capacitated spermatozoa. Alongwith the mobilization of ions the generation of free radicals and efflux of cholesterol also plays an impo~.nt role in thecapacitation state of the spermatozoa. The generation of free radical and efflux of cholesterol change the mechano-dynamic properties of the membrane by oxidation of the polyunsaturated lipids and by generating the cholesterol freepatches. The process of capacitation renders the spermatozoa responsive to the inducers of the acrosome reaction. Theglycoprotein zona pellucida 3 (ZP3) of the egg coat zona pellucida is the potent physiological stimulator of the acro-some reaction; progesterone, a major component of the follicular fluid, is also an inducer of the acrosome reaction.The inducers of the acrosome reaction cause the activation of the various ion-channels leading to high influxes of calci-um, sodium and bicarbonate. The efflux of cholesterol during the process of capacitation alters the permeability of themembrane to the ions and generate areas which are prone to fusion and ve.siculation process during the acrosome reactioa. this review focuses mainly on effects of the ion and ion-channels, free radicals, and membrane fluidity changesduring the process of capacitation and acrosome reaction.

  6. Fabrication of electrodeposited Co nanowire arrays with perpendicular anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Ge Shihui E-mail: zhangzz@lzu.edu.cn; Ma Xiao; Li Chao; Li Wei

    2001-05-01

    Co nanowire arrays have been electrodeposited into polycarbonate membranes with nanosized pores at different voltages. By means of X-ray diffraction, electron diffraction, vibrating sample magnetometer, their microstructures and magnetic properties were investigated at full length. The sample prepared at -1.2 V, 250 mA/cm{sup 2} shows perpendicular anisotropy, but the one deposited at -1.0V, 125 mA/cm{sup 2} has no perpendicular anisotropy. This different magnetic behavior can be explained from their different microstructures. X-ray diffraction and electron diffraction evidence that the former sample is amorphous, and the latter is polycrystalline. In the polycrystalline sample, due to the competition of shape anisotropy and magnetocrystal anisotropy, the sample does not display perpendicular anisotropy. But magnetocrystal anisotropy is very small in amorphous sample, therefore, shape anisotropy plays a dominant role which leads to strong perpendicular anisotropy because of shape anisotropy. Furthermore, applying a magnetic field during deposition, Co grains will preferentially grow with c-axis along the wire axis, which also leads to strong perpendicular anisotropy.

  7. The interaction of turbulence with parallel and perpendicular shocks

    Science.gov (United States)

    Adhikari, L.; Zank, G. P.; Hunana, P.; Hu, Q.

    2016-11-01

    Interplanetary shocks exist in most astrophysical flows, and modify the properties of the background flow. We apply the Zank et al 2012 six coupled turbulence transport model equations to study the interaction of turbulence with parallel and perpendicular shock waves in the solar wind. We model the 1D structure of a stationary perpendicular or parallel shock wave using a hyperbolic tangent function and the Rankine-Hugoniot conditions. A reduced turbulence transport model (the 4-equation model) is applied to parallel and perpendicular shock waves, and solved using a 4th- order Runge Kutta method. We compare the model results with ACE spacecraft observations. We identify one quasi-parallel and one quasi-perpendicular event in the ACE spacecraft data sets, and compute various turbulent observed values such as the fluctuating magnetic and kinetic energy, the energy in forward and backward propagating modes, the total turbulent energy in the upstream and downstream of the shock. We also calculate the error associated with each turbulent observed value, and fit the observed values by a least square method and use a Fourier series fitting function. We find that the theoretical results are in reasonable agreement with observations. The energy in turbulent fluctuations is enhanced and the correlation length is approximately constant at the shock. Similarly, the normalized cross helicity increases across a perpendicular shock, and decreases across a parallel shock.

  8. Experimental study of negative capacitance in LEDs

    Institute of Scientific and Technical Information of China (English)

    FENG Lie-feng; WANG Jun; ZHU Chuan-yun; CONG Hong-xia; CHEN Yong; WANG Cun-da

    2005-01-01

    The experimental study on negative capacitance(NC) of various light-emitting diodes(LEDs) is presented.Experimental result shows that all LEDs display the NC phenomenon.The voltage modulated electroluminescence(VMEL) experiment confirms that the reason of negative capacitance is the strong recombination of the injected carriers in the active region of luminescence.The measures also verify that the dependence of NC on voltage and frequency in different LEDs is similar: NC phenomenon is more obvious with higher voltage or lower frequency.

  9. Development and analysis of a capacitive touch sensor using a liquid metal droplet

    Science.gov (United States)

    Baek, Seungbum; Won, Dong-Joon; Gil Kim, Joong; Kim, Joonwon

    2015-09-01

    In this paper, we introduce a small-sized capacitive touch sensor with large variations in its capacitance. This sensor uses the changes in capacitance caused by the variation of the overlap area between a liquid metal (LM) droplet and a flat electrode while keeping the gap between the droplet and the bottom electrode at a small constant value (i.e. thickness of dielectric layer). Initially, the droplet is placed inside a polydimethylsiloxane (PDMS) chamber, and a thin silicon dioxide film separates the droplet and the electrode. Owing to the high surface tension of the LM, the droplet retains its spherical shape and the overlap area remains small, which means that the capacitance between the droplet and the electrode also remains small. When normal force is applied, the pressure on the membrane pushes the droplet downward, thus spreading the droplet to the bottom of the chamber and increasing the capacitance. To verify our concept, we performed theoretical analyses and experiments using a 2 mm  ×  2 mm  ×  2 mm 1-cell touch sensor. Finally, we obtained a capacitance variation of ~30 pF by applying forces between 0 N and 1 N.

  10. Capacitance of graphene in aqueous electrolytes: The effects of dielectric saturation of water and finite size of ions

    Science.gov (United States)

    Sharma, P.; Mišković, Z. L.

    2014-09-01

    We present a theoretical model for electrolytically top-gated graphene, in which we analyze the effects of dielectric saturation of water due to possibly strong electric fields near the surface of a highly charged graphene, as well as the steric effects due to the finite size of salt ions in an aqueous electrolyte. By combining two well-established analytical models for those two effects, we show that the total capacitance of the solution-gated graphene is dominated by its quantum capacitance for gating potentials ≲1V, which is the range of primary interest for most sensor applications of graphene. On the other hand, at the potentials ≳1V the total capacitance is dominated by a universal capacitance of the electric double layer in the electrolyte, which exhibits a dramatic decrease of capacitance with increasing gating potential due to the interplay of a fully saturated dielectric constant of water and ion crowding near graphene.

  11. Perpendicular magnetic anisotropy of Co85Cr15/Pt multilayers

    Institute of Scientific and Technical Information of China (English)

    Pol Hwang; Baohe Li; Tao Yang; Zhonghai Zhai; Fengwu Zhu

    2004-01-01

    The CoCr/Pt bilayers and (CoCr/Pt)20 multilayers with Pt underlayer were prepared by DC magnetron sputtering. The effects of prepared condition on perpendicular magnetic anisotropy were investigated. The results show that the thickness of Pt underlayer has a great effect on the microstructure and perpendicular magnetic anisotropy of CoCr/Pt bilayers and (CoCr/Pt)20 multilayers.When the thickness of Pt underlayer increases, Pt(111) and CoCr(002) peaks of both CoCr/Pt bilayers and (CoCr/Pt)20 multilayers increase and the bilayer periodicity of the multilayers is improved. The effective magnetic anisotropy of (CoCr/Pt)20 multilayers with Pt underlayer was much larger than that of CoCr/Pt bilayers. The (CoCr/Pt)20 multilayers has a stronger perpendicular magnetic anisotropy than that of CoCr/Pt bilayers. This is ascribed to the interface magnetic anisotropy of the multilayers.

  12. Reduction of track width in perpendicular magnetic recording

    Science.gov (United States)

    Xia, W.; Yamada, T.; Aoi, H.; Muraoka, H.; Nakamura, Y.

    2005-02-01

    In order to three dimensionally analyze perpendicular magnetic recording mechanisms, we have developed a program in which the magnetization of magnetic particles is introduced into calculations of magnetization distributions in a recording layer, based on the commercial software JMAG-Studio. Because this program was based on a FEM calculation, the head and media interactions and demagnetization during the recording process can be accurately modeled. Using this program, methods to reduce the recorded track width in perpendicular magnetic recording were investigated. Decreasing the magnetic spacing, the use of a side-shielded head structure and using media with weak exchange coupling are effective ways to reduce the track width in a single pole head and double-layer perpendicular media recording system.

  13. Quantum capacitance of the armchair-edge graphene nanoribbon

    Indian Academy of Sciences (India)

    Ling-Feng Mao

    2013-08-01

    The quantum capacitance, an important parameter in the design of nanoscale devices, is derived for armchair-edge single-layer graphene nanoribbon with semiconducting property. The quantum capacitance oscillations are found and these capacitance oscillations originate from the lateral quantum confinement in graphene nanoribbon. Detailed studies of the capacitance oscillations demonstrate that the local channel electrostatic potential at the capacitance peak, the height and the number of the capacitance peak strongly depend on the width, especially a few nanometres, of the armchair-edge graphene nanoribbon. It implies that the capacitance oscillations observed in the experiments can be utilized to measure the width of graphene nanoribbon. The results also show that the capacitance oscillations are not seen when the width is larger than 30 nm.

  14. Inside-out electrical capacitance tomography

    DEFF Research Database (Denmark)

    Kjærsgaard-Rasmussen, Jimmy; Meyer, Knud Erik

    2011-01-01

    In this work we demonstrate the construction of an ‘inside-out’ sensor geometry for electrical capacitance tomography (ECT). The inside-out geometry has the electrodes placed around a tube, as usual, but measuring ‘outwards’. The flow between the electrodes and an outer tube is reconstructed...

  15. Comparison of piezoresistive and capacitive ultrasonic transducers

    Science.gov (United States)

    Neumann, John J.; Greve, David W.; Oppenheim, Irving J.

    2004-07-01

    MEMS ultrasonic transducers for flaw detection have heretofore been built as capacitive diaphragm-type devices. A diaphragm forms a moveable electrode, placed at a short gap from a stationary electrode, and diaphragm movement has been detected by capacitance change. Although several research teams have successfully demonstrated that technology, the detection of capacitance change is adversely affected by stray and parasitic capacitances, limiting the sensitivity of such transducers and typically requiring relatively large diaphragm areas. We describe the design and fabrication of what to our knowledge is the first CMOS-MEMS ultrasonic phased array transducer using piezoresistive strain sensing. Piezoresistors have been patterned within the diaphragms, and diaphragm movement creates bending strain which is detected by a bridge circuit, for which conductor losses will be less significant. The prospective advantage of such piezoresistive transducers is that sufficient sensitivity may be achieved with very small diaphragms. We compare transducer response under fluid-coupled ultrasonic excitation and report the experimental gauge factor for the piezoresistors. We also discuss the phased array performance of the transducer in sensing the direction of an incoming wave.

  16. Negative capacitance in multidomain ferroelectric superlattices

    Science.gov (United States)

    Zubko, Pavlo; Wojdeł, Jacek C.; Hadjimichael, Marios; Fernandez-Pena, Stéphanie; Sené, Anaïs; Luk'Yanchuk, Igor; Triscone, Jean-Marc; Íñiguez, Jorge

    2016-06-01

    The stability of spontaneous electrical polarization in ferroelectrics is fundamental to many of their current applications, which range from the simple electric cigarette lighter to non-volatile random access memories. Research on nanoscale ferroelectrics reveals that their behaviour is profoundly different from that in bulk ferroelectrics, which could lead to new phenomena with potential for future devices. As ferroelectrics become thinner, maintaining a stable polarization becomes increasingly challenging. On the other hand, intentionally destabilizing this polarization can cause the effective electric permittivity of a ferroelectric to become negative, enabling it to behave as a negative capacitance when integrated in a heterostructure. Negative capacitance has been proposed as a way of overcoming fundamental limitations on the power consumption of field-effect transistors. However, experimental demonstrations of this phenomenon remain contentious. The prevalent interpretations based on homogeneous polarization models are difficult to reconcile with the expected strong tendency for domain formation, but the effect of domains on negative capacitance has received little attention. Here we report negative capacitance in a model system of multidomain ferroelectric-dielectric superlattices across a wide range of temperatures, in both the ferroelectric and paraelectric phases. Using a phenomenological model, we show that domain-wall motion not only gives rise to negative permittivity, but can also enhance, rather than limit, its temperature range. Our first-principles-based atomistic simulations provide detailed microscopic insight into the origin of this phenomenon, identifying the dominant contribution of near-interface layers and paving the way for its future exploitation.

  17. Constant capacitance in nanopores of carbon monoliths.

    Science.gov (United States)

    García-Gómez, Alejandra; Moreno-Fernández, Gelines; Lobato, Belén; Centeno, Teresa A

    2015-06-28

    The results obtained for binder-free electrodes made of carbon monoliths with narrow micropore size distributions confirm that the specific capacitance in the electrolyte (C2H5)4NBF4/acetonitrile does not depend significantly on the micropore size and support the foregoing constant result of 0.094 ± 0.011 F m(-2).

  18. Thermodynamic cycle analysis for capacitive deionization

    NARCIS (Netherlands)

    Biesheuvel, P.M.

    2009-01-01

    Capacitive deionization (CDI) is an ion removal technology based on temporarily storing ions in the polarization layers of two oppositely positioned electrodes. Here we present a thermodynamic model for the minimum work required for ion separation in the fully reversible case by describing the ionic

  19. Strain-assisted magnetization reversal in Co/Ni multilayers with perpendicular magnetic anisotropy.

    Science.gov (United States)

    Gopman, D B; Dennis, C L; Chen, P J; Iunin, Y L; Finkel, P; Staruch, M; Shull, R D

    2016-06-14

    Multifunctional materials composed of ultrathin magnetic films with perpendicular magnetic anisotropy combined with ferroelectric substrates represent a new approach toward low power, fast, high density spintronics. Here we demonstrate Co/Ni multilayered films with tunable saturation magnetization and perpendicular anisotropy grown directly on ferroelectric PZT [Pb(Zr0.52Ti0.48)O3] substrate plates. Electric fields up to ±2 MV/m expand the PZT by 0.1% and generate at least 0.02% in-plane compression in the Co/Ni multilayered film. Modifying the strain with a voltage can reduce the coercive field by over 30%. We also demonstrate that alternating in-plane tensile and compressive strains (less than 0.01%) can be used to propagate magnetic domain walls. This ability to manipulate high anisotropy magnetic thin films could prove useful for lowering the switching energy for magnetic elements in future voltage-controlled spintronic devices.

  20. Very strong antiferromagnetic interlayer exchange coupling with iridium spacer layer for perpendicular magnetic tunnel junctions

    Science.gov (United States)

    Yakushiji, Kay; Sugihara, Atsushi; Fukushima, Akio; Kubota, Hitoshi; Yuasa, Shinji

    2017-02-01

    We systematically studied the interlayer exchange coupling (IEC) in a perpendicular synthetic antiferromagnetically coupled structure having an Ir spacer layer for perpendicular magnetic tunnel junctions (p-MTJs). We found a broader peak in IEC energy density (Jex) versus spacer thickness (tIr) compared with the case of using a Ru spacer. The highest IEC energy density was 2.6 erg/cm2 at a tIr of about 5 nm. The p-MTJ nanopillars had a high magnetoresistance ratio (131%) as well as a high spin-transfer torque (STT) switching efficiency (about 2). An Ir spacer can be used to make a stable reference layer for STT magnetoresistive random access memory.

  1. Current driven domain wall motion in rare-earth transition metal alloys with perpendicular magnetic anisotropy.

    Science.gov (United States)

    Li, Songtian; Liu, Xiaoxi; Morisako, Akimistu

    2012-09-01

    The domain wall movement behaviors under current combining with magnetic field in perpendicularly magnetized TbFeCo wire were studied by a polar magneto-optical Kerr effect microscope. The velocity for domain wall creeping along electrons flowing direction was found to be apparently higher than that of domain wall creeping against electrons flowing, which is the signature of the spin transfer torque effect. By employing the modified field-driven creep motion law, a spin transfer efficiency of 2.7 Oe cm2/10(6) A was determined for TbFeCo wire by treating the spin transfer torque as an effective field adding to the external field. The high spin transfer efficiency suggests that perpendicularly magnetized system with sharp domain walls in TbFeCo film shows high superiorities for applications in spin transfer torque based devices compared with in-plane magnetized systems.

  2. Strain-assisted magnetization reversal in Co/Ni multilayers with perpendicular magnetic anisotropy

    Science.gov (United States)

    Gopman, D. B.; Dennis, C. L.; Chen, P. J.; Iunin, Y. L.; Finkel, P.; Staruch, M.; Shull, R. D.

    2016-06-01

    Multifunctional materials composed of ultrathin magnetic films with perpendicular magnetic anisotropy combined with ferroelectric substrates represent a new approach toward low power, fast, high density spintronics. Here we demonstrate Co/Ni multilayered films with tunable saturation magnetization and perpendicular anisotropy grown directly on ferroelectric PZT [Pb(Zr0.52Ti0.48)O3] substrate plates. Electric fields up to ±2 MV/m expand the PZT by 0.1% and generate at least 0.02% in-plane compression in the Co/Ni multilayered film. Modifying the strain with a voltage can reduce the coercive field by over 30%. We also demonstrate that alternating in-plane tensile and compressive strains (less than 0.01%) can be used to propagate magnetic domain walls. This ability to manipulate high anisotropy magnetic thin films could prove useful for lowering the switching energy for magnetic elements in future voltage-controlled spintronic devices.

  3. ``Zeptofarad'' (10-21 F) resolution capacitance sensor for scanning capacitance microscopy

    Science.gov (United States)

    Tran, T.; Oliver, D. R.; Thomson, D. J.; Bridges, G. E.

    2001-06-01

    We describe a sensor for use in a scanning capacitance microscope (SCM) that is capable of "zeptofarad" (10-21 F) capacitance measurement resolution in a 1 Hz bandwidth with a peak-to-peak sense voltage on the probe tip of no more than 300 mV. This sensitivity is based on experimental data and simulation results that are in excellent agreement. The complete sensor incorporates an oscillator (phase locked to a 10 MHz crystal oscillator), a coupled transmission line resonator, an amplifier, and a peak detector. The resonator is fabricated from copper-clad, low-loss dielectric material and its size is such that it is easily incorporated with a scanning probe microscope. The sensor's use in the SCM enables capacitance resolution that has not previously been possible while retaining the instrumental advantages of imaging at low sense voltages. The performance of this sensor is discussed and compared to alternative scanning capacitance microscopy methodologies.

  4. Coupled Néel domain wall motion in sandwiched perpendicular magnetic anisotropy nanowires

    OpenAIRE

    Purnama, I.; Kerk, I. S.; Lim, G J; Lew, W. S.

    2015-01-01

    The operating performance of a domain wall-based magnetic device relies on the controlled motion of the domain walls within the ferromagnetic nanowires. Here, we report on the dynamics of coupled Néel domain wall in perpendicular magnetic anisotropy (PMA) nanowires via micromagnetic simulations. The coupled Néel domain wall is obtained in a sandwich structure, where two PMA nanowires that are separated by an insulating layer are stacked vertically. Under the application of high current densit...

  5. Capacitive Bioanodes Enable Renewable Energy Storage in Microbial Fuel Cells

    NARCIS (Netherlands)

    Deeke, A.; Sleutels, T.H.J.A.; Hamelers, H.V.M.; Buisman, C.J.N.

    2012-01-01

    We developed an integrated system for storage of renewable electricity in a microbial fuel cell (MFC). The system contained a capacitive electrode that was inserted into the anodic compartment of an MFC to form a capacitive bioanode. This capacitive bioanode was compared with a noncapacitive

  6. Reversal mechanism in perpendicular media with columnar structure

    NARCIS (Netherlands)

    Wielinga, T.; Lodder, J.C.

    1986-01-01

    A contribution is given to the discussion concerning the nature of the magnetization reversal process in sputtered CoCr recording media with columnar morphology. The paper is restricted to the additional effects on the total perpendicular anisotropy by studying the columnar shape anisotropy and the

  7. Quantum pumping in graphene with a perpendicular magnetic field

    NARCIS (Netherlands)

    Tiwari, R.P.; Blaauboer, M.

    2010-01-01

    We consider quantum pumping of Dirac fermions in a monolayer of graphene in the presence of a perpendicular magnetic field in the central pumping region. The two external pump parameters are electrical voltages applied to the graphene sheet on either side of the pumping region. We analyze this pump

  8. Quantitative magnetic force microscopy on perpendicularly magnetised samples

    NARCIS (Netherlands)

    Hug, Hans J.; Stiefel, B.; van Schendel, P.J.A.; Schendel, P.J.A.; Moser, A.; Hofer, R.; Martin, S.; Guntherodt, H.J.; Porthun, S.; Porthun, Steffen; Abelmann, Leon; Lodder, J.C.; Bochi, Gabriel; O'handley, R.C.

    1998-01-01

    We present a transfer-function approach to calculate the force on a magnetic force microscope tip and the stray field due to a perpendicularly magnetized medium having an arbitrary magnetization pattern. Under certain conditions, it is possible to calculate the magnetization pattern from the

  9. Pinning of written bits in perpendicular recording media

    Energy Technology Data Exchange (ETDEWEB)

    Greaves, S.J.; Muraoka, H. E-mail: muraoka@riec.tohoku.ac.jp; Sonobe, Y.; Schabes, M.; Nakamura, Y

    2001-10-01

    A perpendicular medium comprising two distinct magnetic layers is described. One layer has a granular structure with isolated, exchange-decoupled grains and the other is a continuous, exchange-coupled layer. In the combined structure domain wall movement is restricted and reversed grains within written bits are eliminated. The S/N ratio is improved compared with single layers of either type alone.

  10. Measurement and modeling of gate–drain capacitance of silicon carbide vertical double-diffused MOSFET

    Science.gov (United States)

    Shintani, Michihiro; Nakamura, Yohei; Hiromoto, Masayuki; Hikihara, Takashi; Sato, Takashi

    2017-04-01

    Silicon carbide (SiC) is considered as one of the key materials to realizing device operations in high-temperature, high-frequency, and high-power applications. When designing circuits in such applications, an accurate simulation model for SiC power MOSFETs is important. Among others, the gate–drain capacitance, C gd, is particularly important in building the SiC MOSFET model because the capacitance significantly affects switching behavior of the device. In this paper, a C gd model, which is based on a unified representation of surface potential, is proposed for enhancing the accuracy of circuit simulations. By considering the operation of vertical power SiC MOSFETs, the proposed capacitance model correctly accounts for the capacitance modulation effect due to the channel that is formed when the gate voltage is higher than the drain voltage. In addition, a C gd measurement method is also proposed in order to characterize C gd in a wider voltage range. Through experiments using a commercial SiC power MOSFET, it is demonstrated that the proposed model successfully approximates the capacitance in a wide range of bias voltages without stitching separate equations. It is also demonstrated that the proposed model is twice as accurate as the conventional one.

  11. Low Capacitive Inductors for Fast Switching Devices in Active Power Factor Correction Applications

    DEFF Research Database (Denmark)

    Hernandez Botella, Juan Carlos; Petersen, Lars Press; Andersen, Michael A. E.

    2014-01-01

    is to investigate different winding approaches and identify suitable solutions for high switching frequency/high speed transition PFC designs. A low parasitic capacitance PCB based inductor design is proposed to address the challenges imposed by high switching frequency PFC Boost converters....

  12. Design of capacitance sensor system for void fraction measurement

    Institute of Scientific and Technical Information of China (English)

    LIU Yi-ping; NIU Gang; WANG Jing

    2005-01-01

    Simulation and optimization were applied to a capacitive sensor system based on electrical tomography technology.Sensors, consisting of Morgantown Energy Technology Center (METC) axial synchro driving guard electrodes and two sets of detecting electrodes, make it possible to obtain simultaneously two groups of signals of the void fraction in oil-gas two-phase flow.The computational and experimental results showed that available sensors, charactered by high resolution and fast real-time response can be used for real-time liquid-gas two-phase flow pattern determination.

  13. Flexible 3D Nanoporous Graphene for Desalination and Bio-decontamination of Brackish Water via Asymmetric Capacitive Deionization

    NARCIS (Netherlands)

    El-Deen, Ahmed G.; Boom, Remko M.; Kim, Hak Yong; Duan, Hongwei; Chan-Park, Mary B.; Choi, Jae Hwan

    2016-01-01

    Nanoporous graphene based materials are a promising nanostructured carbon for energy storage and electrosorption applications. We present a novel and facile strategy for fabrication of asymmetrically functionalized microporous activated graphene electrodes for high performance capacitive desalinatio

  14. Flexible 3D Nanoporous Graphene for Desalination and Bio-decontamination of Brackish Water via Asymmetric Capacitive Deionization

    NARCIS (Netherlands)

    El-Deen, Ahmed G.; Boom, Remko M.; Kim, Hak Yong; Duan, Hongwei; Chan-Park, Mary B.; Choi, Jae Hwan

    2016-01-01

    Nanoporous graphene based materials are a promising nanostructured carbon for energy storage and electrosorption applications. We present a novel and facile strategy for fabrication of asymmetrically functionalized microporous activated graphene electrodes for high performance capacitive

  15. Tetragonal Heusler-Like Mn-Ga Alloys Based Perpendicular Magnetic Tunnel Junctions

    Science.gov (United States)

    Ma, Qinli; Sugihara, Atsushi; Suzuki, Kazuya; Zhang, Xianmin; Miyazaki, Terunobu; Mizukami, Shigemi

    2014-10-01

    Films of the Mn-based tetragonal Heusler-like alloys, such as Mn-Ga, exhibit a large perpendicular magnetic anisotropy (PMA), small damping constant, small saturation magnetization and large spin polarizations. These properties are attractive for the application to the next generation high density spin-transfer-torque (STT) magnetic random access memory (STT-MRAM). We reviewed the structure, magnetic properties and Gilbert damping of the alloy films with large PMA, and the current status of research on tunnel magnetoresistance (TMR) in perpendicular magnetic tunnel junctions (p-MTJs) based on Mn-based tetragonal Heusler-like alloy electrode, and also discuss the issues for the application of those to STT-MRAM.

  16. Micromagnetic simulation of FeCo write head in perpendicular recording hard disk drives

    Institute of Scientific and Technical Information of China (English)

    QUAN Liang; WEI Dan

    2006-01-01

    The single-pole tip (SPT) heads made of the high saturation FeCo ferromagnetic metals are crucial for the actualization of ultrahigh density perpendicular recording. The effective head field distribution in the medium is of key importance for the design of the SPT head, which would be analyzed by micromagnetic simulations in this work. Two 3D micromagnetic models of the SPT head were established to select a more appropriate method of modeling, with a magnetostatic image effect or a real soft magnetic material to model the image of the SPT head in soft under layer (SUL). The results from these two designs were tested and compared to the ideal head field calculated by the Jacobi finite element method (FEM); and the design with the real soft magnetic material as image was proved suitable for simulating the ultrahigh density perpendicular recording write head.

  17. Perpendicular magnetic tunnel junction with thin CoFeB/Ta/Co/Pd/Co reference layer

    Energy Technology Data Exchange (ETDEWEB)

    Gan, Huadong, E-mail: huadong@avalanche-technology.com; Malmhall, Roger; Wang, Zihui; Yen, Bing K; Zhang, Jing; Wang, Xiaobin; Zhou, Yuchen; Hao, Xiaojie; Jung, Dongha; Satoh, Kimihiro; Huai, Yiming [Avalanche Technology, 46600 Landing Parkway, Fremont, California 94538 (United States)

    2014-11-10

    Integration of high density spin transfer torque magnetoresistance random access memory requires a thin stack (less than 15 nm) of perpendicular magnetic tunnel junction (p-MTJ). We propose an innovative approach to solve this challenging problem by reducing the thickness and/or moment of the reference layer. A thin reference layer structure of CoFeB/Ta/Co/Pd/Co has 60% magnetic moment of the conventional thick structure including [Co/Pd] multilayers. We demonstrate that the perpendicular magnetization of the CoFeB/Ta/Co/Pd/Co structure can be realized by anti-ferromagnetically coupling to a pinned layer with strong perpendicular anisotropy via Ruderman-Kittel-Kasuya-Yosida exchange interaction. The pMTJ with thin CoFeB/Ta/Co/Pd/Co reference layer has a comparable TMR ratio (near 80%) as that with thick reference layer after annealing at 280 °C. The pMTJ with thin reference layer has a total thickness less than 15 nm, thereby significantly increasing the etching margin required for integration of high density pMTJ array on wafers with form factor of 300 mm and beyond.

  18. Fabrication of L1{sub 0}-MnAl perpendicularly magnetized thin films for perpendicular magnetic tunnel junctions

    Energy Technology Data Exchange (ETDEWEB)

    Hosoda, Masaki; Oogane, Mikihiko; Kubota, Miho; Saruyama, Haruaki; Iihama, Satoshi; Naganuma, Hiroshi; Ando, Yasuo [Department of Applied Physics, Graduate school of Engineering, Tohoku University, Aza-aoba 6-6-05, Aramaki, Aoba-ku, Sendai 980-8579 (Japan); Kubota, Takahide [WPI Advanced Institute for Materials Research, Tohoku University, Katahira 2-1-1, Aoba-ku, Sendai 980-8577 (Japan)

    2012-04-01

    Structural and magnetic properties of MnAl thin films with different composition, growth temperature, and post-annealing temperature were investigated. The optimum condition for fabrication of L1{sub 0}-MnAl perpendicularly magnetized thin film deposited on Cr-buffered MgO single crystal substrate was revealed. The results of x ray diffraction indicated that the MnAl films annealed at proper temperature had a (001)-orientation and L1{sub 0}-ordered structure. The L1{sub 0}-ordered films were perpendicularly magnetized and had a large perpendicular anisotropy. In addition, low surface roughness was achieved. For the optimized fabrication condition, the saturation magnetization M{sub s} of 600 emu/cm{sup 3} and perpendicular magnetic anisotropy K{sub u} of 1.0 x 10{sup 7} erg/cm{sup 3} was obtained using the Mn{sub 48}Al{sub 52} target at deposition temperature of 200 deg. C and post-annealing temperature of 450 deg. C.

  19. Ram seminal plasma proteins contribute to sperm capacitation and modulate sperm-zona pellucida interaction.

    Science.gov (United States)

    Luna, C; Colás, C; Casao, A; Serrano, E; Domingo, J; Pérez-Pé, R; Cebrián-Pérez, J A; Muiño-Blanco, T

    2015-03-01

    Incubation of ram spermatozoa in capacitating conditions with cAMP-elevating agents promotes a progressive time-dependent increase in the capacitated sperm subpopulation. In this study, the fertilizing capacity of ram spermatozoa (ability to bind to the zona pellucida, ZBA rate) capacitated in these conditions was determined. The results showed an increase (P ram spermatozoa. Likewise, the presence of two seminal plasma (SP) proteins able to protect sperm against cold shock (RSVP14 and RSVP20) was evidenced in both SP and the ram sperm surface, and their influence in the fertilizing ability of spermatozoa capacitated in basal medium or with cAMP-elevating agents was determined. The results verified that RSVP14 and RSVP20 act as decapacitating factors given that their addition to SP-free sperm samples previously to capacitation maintained high proportions of the noncapacitated sperm pattern with no increase in protein tyrosine phosphorylation. However, the obtained ZBA rate in the high-cAMP-containing samples was increased in the presence of RSVP20 (P < 0.05). These findings would indicate that the stimulating effect exerted by this protein on the sperm-oocyte binding occurs downstream from the cAMP generation and that the mechanisms by which RSVP20 promotes the zona pellucida binding might be independent of protein tyrosine phosphorylation.

  20. During capacitation in bull spermatozoa, actin and PLC-ζ undergo dynamic interactions.

    Science.gov (United States)

    Mejía-Flores, Itzayana; Chiquete-Félix, Natalia; Palma-Lara, Icela; Uribe-Carvajal, Salvador; de Lourdes Juárez-Mosqueda, María

    2017-09-20

    The migration pattern of sperm-specific phospholipase C-ζ (PLC-ζ) was followed and the role of this migration in actin cytoskeleton dynamics was determined. We investigated whether PLC-ζ exits sperm, opening the possibility that PLC-ζ is the 'spermatozoidal activator factor' (SOAF). As capacitation progresses, the highly dynamic actin cytoskeleton bound different proteins to regulate their location and activity. PLC-ζ participation at the start of fertilization was established. In non-capacitated spermatozoa, PLC-ζ is in the perinuclear theca (PT) and in the flagellum, therefore it was decided to determine whether bovine sperm actin interacts with PLC-ζ to direct its relocation as it progresses from non-capacitated (NC) to capacitated (C) and to acrosome-reacted (AR) spermatozoa. PLC-ζ interacted with actin in NC spermatozoa (100%), PLC-ζ levels decreased in C spermatozoa to 32% and in AR spermatozoa to 57% (P PLC-ζ interaction was twice as high in G-actin (P PLC-ζ was partially released from the cell. It was concluded that actin cytoskeleton dynamics control the migration of PLC-ζ during capacitation and leads to its partial release at AR spermatozoa. It is suggested that liberated PLC-ζ could reach the egg and favour fertilization.

  1. Enhanced Capacitance of Hybrid Layered Graphene/Nickel Nanocomposite for Supercapacitors

    Science.gov (United States)

    Mohd Zaid, Norsaadatul Akmal; Idris, Nurul Hayati

    2016-08-01

    In this work, Ni nanoparticles were directly decorated on graphene (G) nanosheets via mechanical ball milling. Based on transmission electron microscopy observations, the Ni nanoparticles were well dispersed and attached to the G nanosheet without any agglomerations. Electrochemical results showed that the capacitance of a G/Ni nanocomposite was 275 F g-1 at a current density of 2 A g-1, which is higher than the capacitance of bare G (145 F g-1) and bare Ni (3 F g-1). The G/Ni electrode also showed superior performance at a high current density, exhibiting a capacitance of 190 F g-1 at a current density of 5 A g-1 and a capacitance of 144 F g-1 at a current density of 10 A g-1. The equivalent series resistance for G/Ni nanocomposites also decreased. The enhanced performance of this hybrid supercapacitor is best described by the synergistic effect, i.e. dual charge-storage mechanism, which is demonstrated by electrical double layer and pseudocapacitance materials. Moreover, a high specific surface area and electrical conductivity of the materials enhanced the capacitance. These results indicate that the G/Ni nanocomposite is a potential supercapacitor.

  2. Leakage current, capacitance hysteresis and deep traps in Al{sub 0.25}Ga{sub 0.75}N/GaN/SiC high-electron-mobility transistors

    Energy Technology Data Exchange (ETDEWEB)

    Saadaoui, Salah, E-mail: salahsaadaoui_22@yahoo.fr [Laboratoire de Micro-Optoélectronique et Nanostructures, Université de Monastir, Faculté des Sciences de Monastir, Avenue de l’environnement, 5000 Monastir (Tunisia); Salem, Mohamed Mongi Ben; Fathallah, Olfa; Gassoumi, Malek [Laboratoire de Micro-Optoélectronique et Nanostructures, Université de Monastir, Faculté des Sciences de Monastir, Avenue de l’environnement, 5000 Monastir (Tunisia); Gaquière, Christophe [Institut d’Electronique de Microélectronique et de Nanotechnologie IEMN, Département Hyperfréquences et Semiconducteurs, Université des Sciences et Technologies de Lille, Avenue Poincaré, 59652 Villeneuve d’Ascq Cedex (France); Maaref, Hassen [Laboratoire de Micro-Optoélectronique et Nanostructures, Université de Monastir, Faculté des Sciences de Monastir, Avenue de l’environnement, 5000 Monastir (Tunisia)

    2013-03-01

    Hysteresis phenomenon in the capacitance–voltage characteristics and leakage current under reverse-biased Schottky gate were investigated for Al{sub 0.25}Ga{sub 0.75}N/GaN/SiC HEMT's with two different gate lengths. These phenomena were attributed to the electron tunneling through the surface, the bulk or/and the metal/AlGaN interface states. Using Capacitance DLTS, we have found that the deep trap responsible of these phenomena has activation energy of 0.74 eV. It was an extended defect in the AlGaN/GaN heterostructures. Else, an electron trap (Ea=0.16 eV) was detected only in the transistor having the smaller gate length. The possible explanations of its origin will be established in this paper.

  3. Magnetoelastically induced perpendicular magnetic anisotropy and perpendicular exchange bias of CoO/CoPt multilayer films

    Science.gov (United States)

    Guo, Lei; Wang, Yue; Wang, Jian; Muraishi, Shinji; Sannomiya, Takumi; Nakamura, Yoshio; Shi, Ji

    2015-11-01

    The effects of magnetoelastically induced perpendicular magnetic anisotropy (PMA) on perpendicular exchange bias (PEB) have been studied in [CoO5nm/CoPt5nm]5 multilayer films. After deposition at room temperature, [CoO5nm/CoPt5nm]5 multilayer films were post-annealed at 100 °C, 250 °C, 300 °C and 375 °C for 3 h. In-plane tensile stress of CoPt layer was calculated by sin2 φ method, and we found it increased gradually upon annealing from 0.99 GPa (as-deposited) up to 3.02 GPa (300 °C-annealed). As to the magnetic property, significant enhancement of PMA was achieved in [CoO5nm/CoPt5nm]5 multilayer films after annealing due to the increase of CoPt layer in-plane tensile stress. With the enhancement of magnetoelastically induced PMA, great improvement of PEB was also achieved in [CoO5nm/CoPt5nm]5 multilayer films, which increased from 130 Oe (as-deposited) up to 1060 Oe (300 °C-annealed), showing the same change tendency as PMA and the strong correlation with CoPt layer in-plane tensile stress. We consider it is the increase of CoPt layer in-plane tensile stress that leads to the enhancement of CoPt layer PMA, which is favorable for the spins in CoPt layer aligning to a more perpendicular direction. And thus the enhanced PMA with more perpendicular spins alignment in CoPt layer results in the improved PEB in [CoO5nm/CoPt5nm]5 multilayer films through enhanced perpendicular spins coupling at CoO/CoPt interfaces.

  4. Porous Alumina Based Capacitive MEMS RH Sensor

    CERN Document Server

    Juhasz, L; Timar-Horvath, Veronika; Desmulliez, Marc; Dhariwal, Resh

    2008-01-01

    The aim of a joint research and development project at the BME and HWU is to produce a cheap, reliable, low-power and CMOS-MEMS process compatible capacitive type relative humidity (RH) sensor that can be incorporated into a state-of-the-art, wireless sensor network. In this paper we discuss the preparation of our new capacitive structure based on post-CMOS MEMS processes and the methods which were used to characterize the thin film porous alumina sensing layer. The average sensitivity is approx. 15 pF/RH% which is more than a magnitude higher than the values found in the literature. The sensor is equipped with integrated resistive heating, which can be used for maintenance to reduce drift, or for keeping the sensing layer at elevated temperature, as an alternative method for temperature-dependence cancellation.

  5. CMOS Integrated Capacitive DC-DC Converters

    CERN Document Server

    Van Breussegem, Tom

    2013-01-01

    This book provides a detailed analysis of all aspects of capacitive DC-DC converter design: topology selection, control loop design and noise mitigation. Readers will benefit from the authors’ systematic overview that starts from the ground up, in-depth circuit analysis and a thorough review of recently proposed techniques and design methodologies.  Not only design techniques are discussed, but also implementation in CMOS is shown, by pinpointing the technological opportunities of CMOS and demonstrating the implementation based on four state-of-the-art prototypes.  Provides a detailed analysis of all aspects of capacitive DC-DC converter design;  Analyzes the potential of this type of DC-DC converter and introduces a number of techniques to unleash their full potential; Combines system theory with practical implementation techniques; Includes unique analysis of CMOS technology for this application; Provides in-depth analysis of four fabricated prototypes.

  6. Automatic Power Factor Correction Using Capacitive Bank

    Directory of Open Access Journals (Sweden)

    Mr.Anant Kumar Tiwari,

    2014-02-01

    Full Text Available The power factor correction of electrical loads is a problem common to all industrial companies. Earlier the power factor correction was done by adjusting the capacitive bank manually [1]. The automated power factor corrector (APFC using capacitive load bank is helpful in providing the power factor correction. Proposed automated project involves measuring the power factor value from the load using microcontroller. The design of this auto-adjustable power factor correction is to ensure the entire power system always preserving unity power factor. The software and hardware required to implement the suggested automatic power factor correction scheme are explained and its operation is described. APFC thus helps us to decrease the time taken to correct the power factor which helps to increase the efficiency.

  7. The Pyramidal Capacitated Vehicle Routing Problem

    DEFF Research Database (Denmark)

    Lysgaard, Jens

    This paper introduces the Pyramidal Capacitated Vehicle Routing Problem (PCVRP) as a restricted version of the Capacitated Vehicle Routing Problem (CVRP). In the PCVRP each route is required to be pyramidal in a sense generalized from the Pyramidal Traveling Salesman Problem (PTSP). A pyramidal...... found in many optimal solutions to CVRP instances. An optimal solution to the PCVRP may therefore be useful in itself as a heuristic solution to the CVRP. Further, an attempt can be made to find an even better CVRP solution by solving a TSP, possibly leading to a non-pyramidal route, for each...... of the routes in the PCVRP solution. This paper develops an exact branch-and-cut-and-price (BCP) algorithm for the PCVRP. At the pricing stage, elementary routes can be computed in pseudo-polynomial time in the PCVRP, unlike in the CVRP. We have therefore implemented pricing algorithms that generate only...

  8. Locating Depots for Capacitated Vehicle Routing

    DEFF Research Database (Denmark)

    Gørtz, Inge Li; Nagarajan, Viswanath

    2016-01-01

    We study a location-routing problem in the context of capacitated vehicle routing. The input to the k-location capacitated vehicle routing problem (k-LocVRP) consists of a set of demand locations in a metric space and a fleet of k identical vehicles, each of capacity Q. The objective is to locate k...... depots, one for each vehicle, and compute routes for the vehicles so that all demands are satisfied and the total cost is minimized. Our main result is a constant-factor approximation algorithm for k-LocVRP. In obtaining this result, we introduce a common generalization of the k-median and minimum...... spanning tree problems (called k median forest), which might be of independent interest. We give a local-search based (3+ε)-approximation algorithm for k median forest, which leads to a (12+ε)-approximation algorithm for k-LocVRP, for any constant ε>0....

  9. A Versatile Prototyping System for Capacitive Sensing

    Directory of Open Access Journals (Sweden)

    Daniel HRACH

    2008-04-01

    Full Text Available This paper presents a multi-purpose and easy to handle rapid prototyping platform that has been designed for capacitive measurement systems. The core of the prototype platform is a Digital Signal Processor board that allows for the entire data acquisition, data (pre- processing and storage, and communication with any host computer. The platform is running on uCLinux operating system and features the possibility of a fast design and evaluation of capacitive sensor developments. To show the practical benefit of the prototyping platform, three exemplary applications are presented. For all applications, the platform is just plugged to the electrode structure of the sensor front-end without the need for analogue signal pre-conditioning.

  10. Experimental Validation of Topology Optimization for RF MEMS Capacitive Switch Design

    DEFF Research Database (Denmark)

    Philippine, Mandy Axelle; Zareie, Hosein; Sigmund, Ole

    2013-01-01

    In this paper, we present 30 distinct RF MEMS capacitive switch designs that are the product of topology optimizations that control key mechanical properties such as stiffness, response to intrinsic stress gradients, and temperature sensitivity. The designs were evaluated with high-accuracy simul......In this paper, we present 30 distinct RF MEMS capacitive switch designs that are the product of topology optimizations that control key mechanical properties such as stiffness, response to intrinsic stress gradients, and temperature sensitivity. The designs were evaluated with high...

  11. Evaluation of a Capacitance Scaling System

    Science.gov (United States)

    2007-01-01

    2009 at 11:32 from IEEE Xplore . Restrictions apply. Report Documentation Page Form ApprovedOMB No. 0704-0188 Public reporting burden for the...Downloaded on January 30, 2009 at 11:32 from IEEE Xplore . Restrictions apply. 2162 IEEE TRANSACTIONS ON INSTRUMENTATION AND MEASUREMENT, VOL. 56, NO. 6...30, 2009 at 11:32 from IEEE Xplore . Restrictions apply. AVRAMOV-ZAMUROVIC et al.: EVALUATION OF A CAPACITANCE SCALING SYSTEM 2163 measured to vary by

  12. Finite-element simulations of coupling capacitances in capacitively coupled pixel detectors

    CERN Document Server

    AUTHOR|(SzGeCERN)755510

    2017-01-01

    Capacitively coupled hybrid silicon pixel-detector assemblies are under study for the vertex detector at the proposed future CLIC linear electron-positron collider. The assemblies consist of active CCPDv3 sensors, with 25 μm pixel pitch implemented in a 180 nm High- Voltage CMOS process, which are glued to the CLICpix readout ASIC, with the same pixel pitch and processed in a commercial 65 nm CMOS technology. The signal created in the silicon bulk of the active sensors passes a two-stage amplifier, in each pixel, and gets transferred as a voltage pulse to metal pads facing the readout chip (ROC). The coupling of the signal to the metal pads on the ROC side proceeds through the capacitors formed between the two chips by a thin layer of epoxy glue. The coupling strength and the amount of unwanted cross coupling to neighbouring pixels depends critically on the uniformity of the glue layer, its thickness and on the alignment precision during the flip-chip assembly process. Finite-element calculations of the coup...

  13. Effect of two ram sperm capacitating media on acrosome reaction and zona-free hamster oocyte penetration test

    Directory of Open Access Journals (Sweden)

    Silvia Ferrari

    2000-01-01

    Full Text Available An in vitro zona-free hamster oocyte penetration test was utilized in 24 trials in order to evaluate the capacitation media used for ram sperm. A pool of fresh semen was collected from three crossed breed rams. Two semen drops were washed by centrifugation and incubated in high ionic strength treatment (HIS or in a defined medium with HEPES, on heat ewe serum and heparin. After the incubation to promote capacitation, simplified triple-stain technique was used to evaluate the spontaneous acrosome reaction of the capacitated sperm. Superovulation in 96 golden hamsters was induced by PMSG and hCG. The oocytes were treated with hyaluronidase and trypsin to remove, respectively, the cumulus cells and the zona pellucida. Oocytes and capacitated sperm were incubated during 3 hours for further penetration. Then, oocytes were fixed and stained, being evaluated under phase contrast microscope. No significant statistical difference (p >; 0.05 was found between media, concerning the penetration rate of the capacitated sperm and between number of sperm viable with acrosome reaction after the capacitation treatment using two different media. It was concluded that both media utilized were effective in capacitating ram sperm.

  14. Evaluation of EHD films by electrical capacitance

    Science.gov (United States)

    Jablonka, Karolina; Glovnea, Romeo; Bongaerts, Jeroen

    2012-09-01

    The elastohydrodynamic (EHD) lubrication regime occurs in many machine elements where a combination of hydrodynamic effect, elastic deformation of the loaded surfaces and increase in the viscosity of the lubricant with pressure ensures the formation of a very thin, but continuous film of lubricant separating the contacting surfaces. Electrical methods to determine this film's thickness have preceded optical methods, which are widely used today. Although they generally give more qualitative thickness information, electrical methods have the main advantage that they can be applied to metallic contacts in machines, which makes them useful tools in the study of elastohydrodynamically lubricated contacts. This paper is part of a larger study on the application of electrical capacitance for the evaluation of film formation in EHD contacts. The main focus is on the quantitative measurements of film thickness using electrical capacitance. A new approach allowing the lubricant film thickness to be extracted from the measured capacitance is developed using a chromium-coated glass disc and subsequently applied to a steel-on-steel contact. The results show good agreement with optical measurements and theoretical models over a range of film thickness.

  15. Effect of Astaxanthin on Human Sperm Capacitation

    Directory of Open Access Journals (Sweden)

    Luciana Bordin

    2013-06-01

    Full Text Available In order to be able to fertilize oocytes, human sperm must undergo a series of morphological and structural alterations, known as capacitation. It has been shown that the production of endogenous sperm reactive oxygen species (ROS plays a key role in causing cells to undergo a massive acrosome reaction (AR. Astaxanthin (Asta, a photo-protective red pigment belonging to the carotenoid family, is recognized as having anti-oxidant, anti-cancer, anti-diabetic and anti-inflammatory properties and is present in many dietary supplements. This study evaluates the effect of Asta in a capacitating buffer which induces low ROS production and low percentages of acrosome-reacted cells (ARC. Sperm cells were incubated in the presence or absence of increasing concentrations of Asta or diamide (Diam and analyzed for their ROS production, Tyr-phosphorylation (Tyr-P pattern and percentages of ARC and non-viable cells (NVC. Results show that Asta ameliorated both sperm head Tyr-P and ARC values without affecting the ROS generation curve, whereas Diam succeeded in enhancing the Tyr-P level but only of the flagellum without increasing ARC values. It is suggested that Asta can be inserted in the membrane and therefore create capacitation-like membrane alteration which allow Tyr-P of the head. Once this has occurred, AR can take place and involves a higher numbers of cells.

  16. Capacitive Structures for Gas and Biological Sensing

    KAUST Repository

    Sapsanis, Christos

    2015-04-01

    The semiconductor industry was benefited by the advances in technology in the last decades. This fact has an impact on the sensors field, where the simple transducer was evolved into smart miniaturized multi-functional microsystems. However, commercially available gas and biological sensors are mostly bulky, expensive, and power-hungry, which act as obstacles to mass use. The aim of this work is gas and biological sensing using capacitive structures. Capacitive sensors were selected due to its design simplicity, low fabrication cost, and no DC power consumption. In the first part, the dominant structure among interdigitated electrodes (IDEs), fractal curves (Peano and Hilbert) and Archimedean spiral was investigated from capacitance density perspective. The investigation consists of geometrical formula calculations, COMSOL Multiphysics simulations and cleanroom fabrication of the capacitors on a silicon substrate. Moreover, low-cost fabrication on flexible plastic PET substrate was conducted outside cleanroom with rapid prototyping using a maskless laser etching. The second part contains the humidity, Volatile Organic compounds (VOCs) and Ammonia sensing of polymers, Polyimide and Nafion, and metal-organic framework (MOF), Cu(bdc)2.xH2O using IDEs and tested in an automated gas setup for experiment control and data extraction. The last part includes the biological sensing of C - reactive protein (CRP) quantification, which is considered as a biomarker of being prone to cardiac diseases and Bovine serum albumin (BSA) protein quantification, which is used as a reference for quantifying unknown proteins.

  17. Variable substrate temperature deposition of CoFeB film on Ta for manipulating the perpendicular coercive forces

    Science.gov (United States)

    Lakshmanan, Saravanan; Rao, Subha Krishna; Muthuvel, Manivel Raja; Chandrasekaran, Gopalakrishnan; Therese, Helen Annal

    2017-08-01

    Magnetization of Ta/CoFeB/Ta trilayer films with thick layer of CoFeB deposited under different substrate temperatures (Ts) via ultra-high vacuum DC sputtering technique has been measured with the applied magnetic field parallel and perpendicular to the plane of the film respectively to study the perpendicular coercive forces of the film. The samples were further analyzed for its structural, topological, morphological, and electrical transport properties. The core chemical states for the elements present in the CoFeB thin film were analyzed by XPS studies. Magnetization studies reveal the existence of perpendicular coercive forces in CoFeB films deposited only at certain temperatures such as RT, 450 °C, 475 °C and 500 °C. CoFeB film deposited at 475 °C exhibited a maximum coercivity of 315 Oe and a very low saturation magnetization (Ms) of 169 emu/cc in perpendicular direction. This pronounced effect in perpendicular coercive forces observed for CoFeB475 could be attributed to the effect of temperature in enhancing the crystallization of the film at the Ta/CoFeB interfaces. However at temperatures higher than 475 °C the destruction of the Ta/CoFeB interface due to intermixing of Ta and CoFeB results in the disappearance of magnetic anisotropy.

  18. Effect of fast strain on Co/Pt multilayers with perpendicular anisotropy

    Science.gov (United States)

    Singh, Uday; Adenwalla, S.

    2013-09-01

    Materials possessing perpendicular anisotropy have applications in high density magnetic data storage technology. In this paper, we present initial attempts to measure the fast magnetization switching from out-of-plane to in-plane in perpendicular anisotropy Co/Pt multilayers. Interaction with surface acoustic waves (SAW) results in strain induced anisotropy changes in Co/Pt multilayers arising from the magnetostrictive properties of ferromagnetic Co, and changing the easy axis of magnetization. The strain amplitude required to overcome perpendicular magnetic anisotropy is close to 1%. Such large strains are achievable using annular interdigital transducers (AIDT), in which the electrodes follow the velocity curve of the piezoelectric substrate. When excited at the fundamental resonance frequency, SAW propagating towards the center undergo constructive interference and create an intense strain at the focal center. We successfully fabricated AIDT using photolithography with a fundamental resonance of 87.56 MHz. An elliptic structure of Co/Pt multilayers was deposited at the focal center using electron beam lithography (EBL) and magnetron sputtering. The magnetization of the elliptic patterned Co/Pt was measured using focused MOKE and magnetic force microscopy (MFM), confirming that the ellipse is in a single domain state with out of plane anisotropy. Preliminary attempts to measure the magnetization rotation arising from the strain waves did not show the expected magnetization rotation signature. Possible reasons for this are discussed.

  19. Perpendicular magnetic anisotropy of CoPt-AlN composite film with nano-fiber structure

    Energy Technology Data Exchange (ETDEWEB)

    Chen, C.C.; Toyoshima, H.; Hashimoto, M. [University of Electro-Communications, Department of Applied Physics and Chemistry, Tokyo (Japan); Shi, J.; Nakamura, Y. [Tokyo Institute of Technology, Department of Metallurgy and Ceramics Science, Tokyo (Japan)

    2005-06-01

    Co-Pt-AlN films were prepared by sputtering a Co-Pt-Al composite target in Ar+N{sub 2} atmosphere. Upon thermal annealing at elevated temperatures, fcc CoPt and a-AlN are formed in the films as phases separated from one other. Both phases develop as fiber-like columnar grains vertical to the substrate and with their lateral size less than 10 nm. Because of the shape anisotropy of the magnetic fiber grains the CoPt-AlN film shows a perpendicular magnetic anisotropy at a thickness equal to or larger than about 25 nm while the Co-TiN and CoPt-TiO{sub 2} films do not unless their thicknesses reach 50 and 100 nm, respectively. This suggests that both the shape anisotropy of the CoPt magnetic fiber grains and their mutual separation in an a-AlN medium work more effectively in the formation with the perpendicular magnetic anisotropy. Such a perpendicular magnetic anisotropy of the CoPt-AlN film associated with the nano-scale feature makes it a very promising candidate for future recording media with ultra-high area density. (orig.)

  20. Crucial role of interlayer distance for antiferromagnet-induced perpendicular magnetic anisotropy

    Science.gov (United States)

    Wang, Bo-Yao; Lin, Po-Han; Tsai, Ming-Shian; Shih, Chun-Wei; Lee, Meng-Ju; Huang, Chun-Wei; Jih, Nae-Yeou; Cheng, Pei-Yu; Wei, Der-Hsin

    2015-12-01

    Antiferromagnetic (AFM) thin films were recently proposed to be an alternative to conventional materials for achieving perpendicular magnetic anisotropy (PMA) in ferromagnetic thin films, because AFM thin films exhibit an advantage of flexible control. Here, we report that antiferromagnet-induced PMA is highly sensitive to interfacial moments of AFM thin films as well as the magnetic interaction of such moments with volume moments, determined according to the vertical interlayer distance. Magnetic hysteresis loops and x-ray magnetic domain imaging revealed the establishment of perpendicular magnetization on face-centered tetragonal (fct)-like Mn/Co/Ni films when covered with monolayered Mn films. A cover of Mn films that exhibit contracted fct- [vertical-to-in-plane lattice constant ratio (c /a )=0.95 ] and expanded fct-like (c /a =1.05 ) structures at different thickness levels induced in-plane magnetic anisotropy and PMA in Co/Ni films, respectively, confirming that the interlayer distance is a crucial parameter for establishing perpendicular magnetization.

  1. Thermally robust Mo/CoFeB/MgO trilayers with strong perpendicular magnetic anisotropy.

    Science.gov (United States)

    Liu, T; Zhang, Y; Cai, J W; Pan, H Y

    2014-07-31

    The recent discovery of perpendicular magnetic anisotropy (PMA) at the CoFeB/MgO interface has accelerated the development of next generation high-density non-volatile memories by utilizing perpendicular magnetic tunnel junctions (p-MTJs). However, the insufficient interfacial PMA in the typical Ta/CoFeB/MgO system will not only complicate the p-MTJ optimization, but also limit the device density scalability. Moreover, the rapid decreases of PMA in Ta/CoFeB/MgO films with annealing temperature higher than 300°C will make the compatibility with CMOS integrated circuits a big problem. By replacing the Ta buffer layer with a thin Mo film, we have increased the PMA in the Ta/CoFeB/MgO structure by 20%. More importantly, the thermal stability of the perpendicularly magnetized (001)CoFeB/MgO films is greatly increased from 300°C to 425°C, making the Mo/CoFeB/MgO films attractive for a practical p-MTJ application.

  2. Thermal Stability of Magnetic States in Circular Thin-Film Nanomagnets with Large Perpendicular Magnetic Anisotropy

    Science.gov (United States)

    Chaves-O'Flynn, Gabriel

    The scaling of the energy barrier to magnetization reversal in thin-film nanomagnets with perpendicular magnetization as a function of their lateral size is of great interest and importance for high-density magnetic random access memory devices. Experimental studies of such elements show either a quadratic or linear dependence of the energy barrier on element diameter. I will discuss a theoretical model we developed to determine the micromagnetic configurations that set the energy barrier for thermally activated reversal of a thin disk with perpendicular magnetic anisotropy as a function of disk diameter. We find a critical length in the problem that is set by the exchange and effective perpendicular magnetic anisotropy energies, with the latter including the size dependence of the demagnetization energy. For diameters smaller than this critical length, the reversal occurs by nearly coherent magnetization rotation and the energy barrier scales with the square of the diameter normalized to the critical length (for fixed film thickness), while for larger diameters, the transition state has a domain wall, and the energy barrier depends linearly on the normalized diameter. Simple analytic expressions are derived for these two limiting cases and verified using full micromagnetic simulations with the string method. Further, the effect of an applied field is considered and shown to lead to a plateau in the energy barrier versus diameter dependence at large diameters. Based on these finding I discuss the prospects and material challenges in the scaling of magnetic memory devices based on thin films with strong perpendicular magnetic anisotropy. In collaboration with G. Wolf, J. Z. Sun and A. D. Kent. Supported by NSF-DMR-1309202 and in part by Spin Transfer Technologies Inc. and the Nanoelectronics Research Initiative through the Institute for Nanoelectronics Discovery and Exploration.

  3. Variable variance Preisach model for multilayers with perpendicular magnetic anisotropy

    Science.gov (United States)

    Franco, A. F.; Gonzalez-Fuentes, C.; Morales, R.; Ross, C. A.; Dumas, R.; Åkerman, J.; Garcia, C.

    2016-08-01

    We present a variable variance Preisach model that fully accounts for the different magnetization processes of a multilayer structure with perpendicular magnetic anisotropy by adjusting the evolution of the interaction variance as the magnetization changes. We successfully compare in a quantitative manner the results obtained with this model to experimental hysteresis loops of several [CoFeB/Pd ] n multilayers. The effect of the number of repetitions and the thicknesses of the CoFeB and Pd layers on the magnetization reversal of the multilayer structure is studied, and it is found that many of the observed phenomena can be attributed to an increase of the magnetostatic interactions and subsequent decrease of the size of the magnetic domains. Increasing the CoFeB thickness leads to the disappearance of the perpendicular anisotropy, and such a minimum thickness of the Pd layer is necessary to achieve an out-of-plane magnetization.

  4. Capacitance Sensing and Software-Realized Lock-in Amplifier for the Electromagnetically Levitated Micro Gyroscope

    Institute of Scientific and Technical Information of China (English)

    HUANG Xiao-gang; CHEN Wen-yuan; LIU Wu; ZHANG Wei-ping; WU Xiao-sheng

    2007-01-01

    In the novel prototype of micro-gyroscope structure, the new configured capacitance sensing scheme for the micro gyroscope was analyzed and the virtual instrument based detection scheme was implemented. The digital lock-in amplifier was employed in the capacitance detection to restrain the noise interference. The capacitance analysis shows that 1 fF capacitance variation corresponds to 0.1 degree of the turn angle. The differential capacitance bridge and the charge integral amplifier were used as the front signal input interface. In the implementation of digital lock-in amplifier, a new routine which warranted the exactly matching of the reference phase to signal phase was proposed. The result of the experiment shows that digital lock-in amplifier can greatly eliminate the noise in the output signal. The non linearity of the turn angle output is 2.3 % and the minimum resolution of turn angle is 0.04 degrees. The application of the software demodulation in the signal detection of micro-electro-mechanical-system (MEMS) device is a new attempt, and it shows the prospective for a high-performance application.

  5. A Polymer-Based Capacitive Sensing Array for Normal and Shear Force Measurement

    Directory of Open Access Journals (Sweden)

    Ming-Yuan Cheng

    2010-11-01

    Full Text Available In this work, we present the development of a polymer-based capacitive sensing array. The proposed device is capable of measuring normal and shear forces, and can be easily realized by using micromachining techniques and flexible printed circuit board (FPCB technologies. The sensing array consists of a polydimethlysiloxane (PDMS structure and a FPCB. Each shear sensing element comprises four capacitive sensing cells arranged in a 2 × 2 array, and each capacitive sensing cell has two sensing electrodes and a common floating electrode. The sensing electrodes as well as the metal interconnect for signal scanning are implemented on the FPCB, while the floating electrodes are patterned on the PDMS structure. This design can effectively reduce the complexity of the capacitive structures, and thus makes the device highly manufacturable. The characteristics of the devices with different dimensions were measured and discussed. A scanning circuit was also designed and implemented. The measured maximum sensitivity is 1.67%/mN. The minimum resolvable force is 26 mN measured by the scanning circuit. The capacitance distributions induced by normal and shear forces were also successfully captured by the sensing array.

  6. An experimental study of nonlinear behaviour of capacitance in graphene/carbon nanotube hybrid films

    Science.gov (United States)

    Alsawafi, Suaad; Wang, Xiao; Jin, Jie; Song, Mo

    2016-06-01

    Graphene (G) and graphene oxide (GO)/carbon nanotubes (CNTs) hybrid films were fabricated as high performance electrode materials by a simple water solution casting method with different contents of single-wall CNT (SWCNT), multi wall CNT (MWCNT) and multi wall CNT with hydroxyl group (MWCNT-OH). The films with MWCNTs showed a layered, interconnected and well entangled structure at nano-scale. With increasing CNT contents, the capacitance of the G/MWCNT and GO/MWCNT films raised almost linearly and their resistance reduced. G/SWCNT and GO/SWCNT films did not form layered structures leading to a very low capacitance. Nonlinear behaviour of the capacitance with voltage has been observed in the G/MWCNT and GO/MWCNT hybrid films. The length and thickness of the hybrid film have significant influences on the capacitance. The capacitance and conductivity increase with increasing the thickness and decrease with increasing the length of the hybrid films. For the application of graphene/CNT hybrid films as electrodes, these characters could be taken into account.

  7. Characterization of a soft elastomeric capacitive strain sensor for fatigue crack monitoring

    Science.gov (United States)

    Kong, Xiangxiong; Li, Jian; Laflamme, Simon; Bennett, Caroline; Matamoros, Adolfo

    2015-04-01

    Fatigue cracks have been one of the major factors for the deterioration of steel bridges. In order to maintain structural integrity, monitoring fatigue crack activities such as crack initiation and propagation is critical to prevent catastrophic failure of steel bridges due to the accumulation of fatigue damage. Measuring the strain change under cracking is an effective way of monitoring fatigue cracks. However, traditional strain sensors such as metal foil gauges are not able to capture crack development due to their small size, limited measurement range, and high failure rate under harsh environmental conditions. Recently, a newly developed soft elastomeric capacitive sensor has great promise to overcome these limitations. In this paper, crack detection capability of the capacitive sensor is demonstrated through Finite Element (FE) analysis. A nonlinear FE model of a standard ASTM compact tension specimen is created which is calibrated to experimental data to simulate its response under fatigue loading, with the goal to 1) depict the strain distribution of the specimen under the large area covered by the capacitive sensor due to cracking; 2) characterize the relationship between capacitance change and crack width; 3) quantify the minimum required resolution of data acquisition system for detecting the fatigue cracks. The minimum resolution serves as a basis for the development of a dedicated wireless data acquisition system for the capacitive strain sensor.

  8. Harmonic measures of slit sides perpendicular to the domain boundary

    CERN Document Server

    Prokhorov, Dmitri

    2012-01-01

    The article is devoted to the geometry of solutions to the chordal Loewner equation which is based on comparison of singular solutions and harmonic measures for the sides of a slit in domains generated by a driving term. It is proved that harmonic measures of two sides of a slit in the upper half-plane which is perpendicular to the real axis are asymptotically equal to each other.

  9. Artificially engineered Heusler ferrimagnetic superlattice exhibiting perpendicular magnetic anisotropy

    OpenAIRE

    Ma, Q.L.; X. M. Zhang; Miyazaki, T.; Mizukami, S.

    2015-01-01

    To extend density limits in magnetic recording industry, two separate strategies were developed to build the storage bit in last decade, introduction of perpendicular magnetic anisotropy (PMA) and adoption of ferrimagnetism/antiferromagnetism. Meanwhile, these properties significantly improve device performance, such as reducing spin-transfer torque energy consumption and decreasing signal-amplitude-loss. However, materials combining PMA and antiferromagnetism rather than transition-metal/rar...

  10. PERBEDAAN SKIN CAPACITANCE DAN TRANSEPIDERMAL WATER LOSS PADA KULIT NON-LESI PASIEN PITIRIASIS VERSIKOLOR DENGAN NON-PITIRIASIS VERSIKOLOR

    Directory of Open Access Journals (Sweden)

    Satya Wydya Yenny

    2008-09-01

    Full Text Available AbstrakPada pitiriasis versikolor sering timbul kekambuhan, diduga salah satu penyebabnya adalah kelembaban kulit yang tinggi. Kelembaban kulit dipengaruhi oleh skin capacitance dan transepidermal water loss.Mengetahui skin capacitance dan transepidermal water loss kulit pasien pitiriasis versikolor dan perbedaannya dengan non-pitiriasis versikolor.Penelitian ini merupakan studi potong lintang perbandingan antar kelompok, yang dilakukan pada bulan September sampai dengan Nopember 2004 di Rumah Sakit Dr. Cipto Mangunkusumo. Subyek penelitian pasien pitiriasis versikolor dan kontrol non-pitiriasis versikolor yang dipasangkan dalam hal umur dan jenis kelamin dan dilakukan pemeriksaan skin capacitance dan transepidermal water loss pada kulit yang tampak normal di punggung menggunakan alat Tewameter/Corneometer 350.Dalam kurun waktu tersebut telah diperiksa sebanyak 32 pasien pitiriasis versikolor dan 32 kontrol non-pitiriasis versikolor. Skin capacitance pasien pitiriasis versikolor secara statistik tidak berbeda dengan kontrol non-pitiriasis versikolor (p = 0,730. Transepidermal water loss pasien pitiriasis versikolor secara bermakna lebih rendah dari pada kelompok kontrol non-pitiriasis versikolor (p = 0,000.Tidak ada perbedaan skin capacitance kulit pasien pitiriasis versikolor dengan non-pitiriasis versikolor. Transepidermal water loss kulit pasien pitiriasis versikolor lebih rendah daripada non-pitiriasis versikolor.Kata kunci: pitiriasis versikolor, skin capacitance, transepidermal water lossAbstractThe recurrence of pityriasis versicolor is high, it could be caused by high skin hydration. Skin hydration was influenced by skin capacitance and transepidermal water loss.ARTIKEL PENELITIAN168The purpose of this study was to compare the differences of the skin capacitance and transepidermal water loss between the pityriasis versicolor skin and healthy non-pityriasis versicolor skin.The design of this study was comparative cross-sectional study

  11. Perpendicular magnetic anisotropy of CoSiB/Pt multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Park, J. S.; Yim, H. I. [Sookmyung Women' s University, Seoul (Korea, Republic of); Hwang, J. Y.; Lee, S. B. [Hanyang University, Seoul (Korea, Republic of); Kim, T. W. [Sejong University, Seoul (Korea, Republic of)

    2010-12-15

    We have investigated the perpendicular magnetic anisotropy of [CoSiB t{sub CoSiB}/Pt t{sub Pt}]{sub n} multilayers as a function of the CoSiB and the Pt thicknesses and the number of repetition of the CoSiB/Pt bilayers. The coercivity (H{sub c}) and the saturation magnetization (M{sub s}) of the amorphous ferromagnetic material Co{sub 75}Si{sub 15}B{sub 10} were taken to be 1.6 Oe and 407 emu/cm{sup 3}, respectively. The H{sub c} in [CoSiB t{sub CoSiB}/Pt 14 A]{sub 5} multilayers increases with increasing t{sub CoSiB} to reach a maximum at t{sub CoSiB} = 3 A and then decreases for t{sub CoSiB} > 3 A. The highest H{sub c} of 224 Oe and the highest perpendicular magnetic anisotropy K{sub u} of 2 x 10{sup 6} erg/cm{sup 3} were obtained in the [CoSiB 3 A/Pt 14 A]{sub 5} multilayer. Additional Pt layers do not contribute to the perpendicular magnetic anisotropy. The single-domain structure evolves into a striped multidomain structure as the bilayer repetition number n increases above 6.

  12. Perpendicularly magnetized ferrimagnetic [Mn50Ga50/Co2FeAl] superlattice and the utilization in magnetic tunnel junctions

    Directory of Open Access Journals (Sweden)

    Q. L. Ma

    2015-08-01

    Full Text Available The ferrimagnetic superlattice (SL [MnGa/Co2FeAl]n exhibiting perpendicular magnetic anisotropy opened a new method for spintronics materials used in magnetic random access memory, because of the high anisotropy, small damping constant and tunable magnetization. In this work, we fabricated SLs with different MnGa composition and studied the MnGa composition dependence of the structure and magnetic properties of the SLs. Furthermore, we fabricated fully perpendicular magnetic tunnel junctions with SLs as both top and bottom electrodes. A clear tunnel magnetoresistance (TMR effect with TMR ratio of 1.3% at room temperature was observed.

  13. Chloride Is Essential for Capacitation and for the Capacitation-associated Increase in Tyrosine Phosphorylation*

    Science.gov (United States)

    Wertheimer, Eva V.; Salicioni, Ana M.; Liu, Weimin; Trevino, Claudia L.; Chavez, Julio; Hernández-González, Enrique O.; Darszon, Alberto; Visconti, Pablo E.

    2008-01-01

    After epididymal maturation, sperm capacitation, which encompasses a complex series of molecular events, endows the sperm with the ability to fertilize an egg. This process can be mimicked in vitro in defined media, the composition of which is based on the electrolyte concentration of the oviductal fluid. It is well established that capacitation requires Na+, \\documentclass[10pt]{article} \\usepackage{amsmath} \\usepackage{wasysym} \\usepackage{amsfonts} \\usepackage{amssymb} \\usepackage{amsbsy} \\usepackage{mathrsfs} \\usepackage{pmc} \\usepackage[Euler]{upgreek} \\pagestyle{empty} \\oddsidemargin -1.0in \\begin{document} \\begin{equation*}{\\mathrm{HCO}}_{3}^{-}\\end{equation*}\\end{document}, Ca2+, and a cholesterol acceptor; however, little is known about the function of Cl– during this important process. To determine whether Cl–, in addition to maintaining osmolarity, actively participates in signaling pathways that regulate capacitation, Cl– was replaced by either methanesulfonate or gluconate two nonpermeable anions. The absence of Cl– did not affect sperm viability, but capacitation-associated processes such as the increase in tyrosine phosphorylation, the increase in cAMP levels, hyperactivation, the zona pellucidae-induced acrosome reaction, and most importantly, fertilization were abolished or significantly reduced. Interestingly, the addition of cyclic AMP agonists to sperm incubated in Cl–-free medium rescued the increase in tyrosine phosphorylation and hyperactivation suggesting that Cl– acts upstream of the cAMP/protein kinase A signaling pathway. To investigate Cl– transport, sperm incubated in complete capacitation medium were exposed to a battery of anion transport inhibitors. Among them, bumetanide and furosemide, two blockers of Na+/K+/Cl– cotransporters (NKCC), inhibited all capacitation-associated events, suggesting that these transporters may mediate Cl– movements in sperm. Consistent with these results, Western blots

  14. A new TiW seed layer for SmCo{sub 5} films with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Cheng, Weiming; Liu, Wenwu [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Wang, Xiao [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Dai, Yifan; Cheng, Xiaomin [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Miao, Xiangshui, E-mail: miaoxs@mail.hust.edu.cn [Wuhan National Laboratory for Optoelectronics, Huazhong University of Science and Technology, Wuhan 430074 (China); Department of Electronic Science and Technology, Huazhong University of Science and Technology, Wuhan 430074 (China); Wuhan National High Magnetic Field Center, Huazhong University of Science and Technology, Wuhan 430074 (China)

    2012-11-15

    A new seed layer TiW is proposed for SmCo{sub 5} films with perpendicular magnetic anisotropy. The influence of a TiW seed layer on the microstructure and the surface morphology of Cu underlayer are studied. The grain size and surface roughness dependence of Cu underlayer on the thickness and the annealing of the TiW seed layer are also investigated. The improvement in the perpendicular magnetic properties of SmCo{sub 5} film from the TiW seed layer is approved. The results show that a 5 nm Ti{sub 3}W{sub 7} seed layer improves the microstructure and surface morphology of Cu underlayer, and significantly improves the perpendicular magnetic properties of SmCo{sub 5} film. The diffusion barrier and a high melting point of the TiW seed layer are regarded as the physical mechanism of the improvement for SmCo{sub 5} film with perpendicular magnetic anisotropy. - Highlights: Black-Right-Pointing-Pointer TiW seed layer improves the texture of Cu under layer. Black-Right-Pointing-Pointer TiW seed layer decreases the surface roughness of Cu underlayer. Black-Right-Pointing-Pointer A 5 nm TiW seed layer significantly improves the perpendicular coercivity of SmCo{sub 5} film. Black-Right-Pointing-Pointer Diffusion barrier and a high melting point of TiW seed layer are the physical mechanism of the improvement for SmCo{sub 5} film with perpendicular magnetic anisotropy.

  15. Non-contact wafer thickness measurement of capacitance sensor circuit based on CAV424

    Directory of Open Access Journals (Sweden)

    Yan You Jun

    2016-01-01

    Full Text Available Non-contact wafer thickness measurement with the CAV424 capacitance sensor special integrated circuit and arc pole plate capacitor sensor has good stability and linearity under low capacity of the bottom of sensor and low&entity; C condition. This method has a high technical advantages and practical value. Two capacitance sensors Cb, Ca measurement spacing 4mm install at the same axis which constitutes the size condition for measuring thickness. The static capacity of Ca and Cb is a constant value. The capacity of Cb and Ca will change when the silicon wafer is involved. This change is checked by the CAV424 capacitive sensor which has better linearity and higher thickness resolution.

  16. Greatly improved small inductance measurement using quartz crystal parasitic capacitance compensation.

    Science.gov (United States)

    Matko, Vojko; Jezernik, Karel

    2010-01-01

    Generally, quartz crystal inductance frequency pulling in oscillators is very low and therefore is not often used in practice. The new method of improving frequency pullability uses inductance to compensate for quartz stray capacitances. To this end, a special AT fundamental quartz crystal working near the antiresonance frequency is selected. By modifying its equivalent circuit with load inductance and series tuning capacitance, the magnetic sensing of the circuit can be highly improved. The experimental results show that the new approach using the quartz crystal stray capacitance compensation method increases the frequency pulling range (from ≅2 kHz/μH to ≅600 kHz/μH) by ×300 depending on the type of oscillator, making possible the measurement of nano-magnetic changes.

  17. A new touch mode capacitive pressure sensor with two deformable diaphragms

    Institute of Scientific and Technical Information of China (English)

    JIAO Yu-zhong

    2003-01-01

    To achieve the characteristics of better linearity, a new type of touch mode capacitive pressure sensor named as DDTMCPS is devised, which has a pair of deformable sensing diaphragms. Compared to present touch mode capacitive pressure sensors, the new sensor is characterized by better linearity, and large linear operation range. Such a device also has high sensitivity, and other advantages of normal touch mode capacitive pressure sensor. In the case of such a novel sensor, the second diaphragm served as bottom electrode plays great roles in modifying the deflection of the first diaphragm served as top electrode, furthermore optimizing the performance of touch mode sensors. Silicon fusion bonding technology is advised to fabricate the novel device.

  18. Changes in exposed membrane proteins during in vitro capacitation of boar sperm

    Energy Technology Data Exchange (ETDEWEB)

    Berger, T. (Univ. of California, Davis (USA))

    1990-11-01

    Exposed plasma membrane proteins were labeled with {sup 125}I before and after incubation of boar sperm under capacitating conditions. Labeled protein profiles were compared to the ability of the sperm to penetrate zona-free hamster ova. Quantitatively, the labeled sperm membrane proteins were primarily low Mr prior to capacitation. The majority of the labeled seminal plasma protein was also low Mr. After capacitation, two new proteins (64,000 Mr and 78,000 Mr) were labeled. Sperm did not exhibit these exposed membrane proteins when incubated under noncapacitating conditions. Appearance of these proteins was not correlated to the percentage of acrosome-reacted sperm. Although the 64,000 Mr protein was not consistently observed, the relative labeling of the 78,000 Mr protein was highly correlated with the ability of sperm to fuse with zona-free hamster ova. The 78,000 Mr protein may be a sperm protein involved in fusion with the egg plasma membrane.

  19. Capacitive Micro Pressure Sensor Integrated with a Ring Oscillator Circuit on Chip

    Directory of Open Access Journals (Sweden)

    Cheng-Yang Liu

    2009-12-01

    Full Text Available The study investigates a capacitive micro pressure sensor integrated with a ring oscillator circuit on a chip. The integrated capacitive pressure sensor is fabricated using the commercial CMOS (complementary metal oxide semiconductor process and a post-process. The ring oscillator is employed to convert the capacitance of the pressure sensor into the frequency output. The pressure sensor consists of 16 sensing cells in parallel. Each sensing cell contains a top electrode and a lower electrode, and the top electrode is a sandwich membrane. The pressure sensor needs a post-CMOS process to release the membranes after completion of the CMOS process. The post-process uses etchants to etch the sacrificial layers, and to release the membranes. The advantages of the post-process include easy execution and low cost. Experimental results reveal that the pressure sensor has a high sensitivity of 7 Hz/Pa in the pressure range of 0–300 kPa.

  20. Capacitive Micro Pressure Sensor Integrated with a Ring Oscillator Circuit on Chip

    Science.gov (United States)

    Dai, Ching-Liang; Lu, Po-Wei; Chang, Chienliu; Liu, Cheng-Yang

    2009-01-01

    The study investigates a capacitive micro pressure sensor integrated with a ring oscillator circuit on a chip. The integrated capacitive pressure sensor is fabricated using the commercial CMOS (complementary metal oxide semiconductor) process and a post-process. The ring oscillator is employed to convert the capacitance of the pressure sensor into the frequency output. The pressure sensor consists of 16 sensing cells in parallel. Each sensing cell contains a top electrode and a lower electrode, and the top electrode is a sandwich membrane. The pressure sensor needs a post-CMOS process to release the membranes after completion of the CMOS process. The post-process uses etchants to etch the sacrificial layers, and to release the membranes. The advantages of the post-process include easy execution and low cost. Experimental results reveal that the pressure sensor has a high sensitivity of 7 Hz/Pa in the pressure range of 0–300 kPa. PMID:22303167

  1. Dielectric Properties of Capacitive-Type Humidity Sensor Made under Different Pressures

    Institute of Scientific and Technical Information of China (English)

    Jing Wang; Xiao-hua Wang

    2006-01-01

    Capacitive humidity sensors were made of nanometer barium titanate. The pellets were prepared under different pressures between 3920N to 7850N force. The capacitance changes in three orders of magnitude in the relative humidity range of 10% ~ 98%, indicating high humidity sensitivity of the sensors. At a certain measuring frequency, the capacitance of the sensors increases as increasing of the preparation pressure, while the sensitivity of the sensors basically remains the same. The frequencies corresponding to the peaks of the dielectric loss of the sensors move to the higher frequency direction as increasing of the relative humidity. At a certain humidity, the frequencies corresponding to the peaks of the dielectric loss move to the higher frequency direction as increasing of the preparation pressure.

  2. Hybrid discrete particle swarm optimization algorithm for capacitated vehicle routing problem

    Institute of Scientific and Technical Information of China (English)

    2006-01-01

    Capacitated vehicle routing problem (CVRP) is an NP-hard problem. For large-scale problems, it is quite difficult to achieve an optimal solution with traditional optimization methods due to the high computational complexity. A new hybrid approximation algorithm is developed in this work to solve the problem. In the hybrid algorithm, discrete particle swarm optimization (DPSO) combines global search and local search to search for the optimal results and simulated annealing (SA) uses certain probability to avoid being trapped in a local optimum. The computational study showed that the proposed algorithm is a feasible and effective approach for capacitated vehicle routing problem, especially for large scale problems.

  3. A Fast Parallel Measurement and Data Acquisition Strategy for Electrical Capacitance Tomography

    Institute of Scientific and Technical Information of China (English)

    LUGeng; PENGLihui; ZHANGBaofen

    2004-01-01

    An AC-based parallel measurement strategy for developing Electrical capacitance tomography (ECT) with high data acquisition speed is presented. By applying N sinusoidal signals with different frequencies on N electrodes simultaneously, all capacitances between different electrode combinations can be measured simultaneously without switching excitation signal between different electrodes one bye one. A 4-electrode model is set up based on MultisimTM, which shows the feasibility of the system. For an N-electrodes ECT system, the data acquisition speed is improved (N-1) times. For a 12-electrode system, the data acquisition speed will be up to 2000 frames per second.

  4. Perpendicular Magnetic Anisotropy in Co-Based Full Heusler Alloy Thin Films

    Science.gov (United States)

    Wu, Y.; Xu, X. G.; Miao, J.; Jiang, Y.

    2015-12-01

    Half-metallic Co-based full Heusler alloys have been qualified as promising functional materials in spintronic devices due to their high spin polarization. The lack of perpendicular magnetic anisotropy (PMA) is one of the biggest obstacles restricting their application in next generation ultrahigh density storage such as magnetic random access memory (MARM). How to induce the PMA in Co-based full Heusler alloy thin films has attracted much research interest of scientists. This paper presents an overview of recent progress in this research area. We hope that this paper would provide some guidance and ideas to develop highly spin-polarized Co-based Heusler alloy thin films with PMA.

  5. Current induced perpendicular-magnetic-anisotropy racetrack memory with magnetic field assistance

    Energy Technology Data Exchange (ETDEWEB)

    Zhang, Y.; Klein, J.-O.; Chappert, C.; Ravelosona, D. [IEF, University of Paris-Sud, Orsay 91405 (France); UMR8622, CNRS, Orsay 91405 (France); Zhao, W. S., E-mail: weisheng.zhao@u-psud.fr [IEF, University of Paris-Sud, Orsay 91405 (France); UMR8622, CNRS, Orsay 91405 (France); Electronics and Information Engineering School, University of Beihang, Beijing 100191 (China)

    2014-01-20

    High current density is indispensable to shift domain walls (DWs) in magnetic nanowires, which limits the using of racetrack memory (RM) for low power and high density purposes. In this paper, we present perpendicular-magnetic-anisotropy (PMA) Co/Ni RM with global magnetic field assistance, which lowers the current density for DW motion. By using a compact model of PMA RM and 40 nm design kit, we perform mixed simulation to validate the functionality of this structure and analyze its density potential. Stochastic DW motion behavior has been taken into account and statistical Monte-Carlo simulations are carried out to evaluate its reliability performance.

  6. A novel capacitance sensor for fireside corrosion measurement

    Science.gov (United States)

    Ban, Heng; Li, Zuoping

    2009-11-01

    Fireside corrosion in coal-fired power plants is a leading mechanism for boiler tube failures. Online monitoring of fireside corrosion can provide timely data to plant operators for mitigation implementation. This paper presents a novel sensor concept for measuring metal loss based on electrical capacitance. Laboratory-scale experiments demonstrated the feasibility of design, fabrication, and operation of the sensor. The fabrication of the prototype sensor involved sputtering deposition of a thin metal coating with varying thickness on a ceramic substrate. Corrosion metal loss resulted in a proportional decrease in electrical capacitance of the sensor. Laboratory experiments using a muffle furnace with an oxidation environment demonstrated that low carbon steel coatings on ceramic substrate survived cyclic temperatures over 500 °C. Measured corrosion rates of sputtered coating in air had an Arrhenius exponential dependence on temperature, with metal thickness loss ranging from 2.0 nm/h at 200 °C to 2.0 μm/h at 400 °C. Uncertainty analysis indicated that the overall measurement uncertainty was within 4%. The experimental system showed high signal-to-noise ratio, and the sensor could measure submicrometer metal thickness changes. The laboratory experiments demonstrated that the sensor concept and measurement system are capable of short term, online monitoring of metal loss, indicating the potential for the sensor to be used for fireside corrosion monitoring and other metal loss measurement.

  7. Opening of K+ channels by capacitive stimulation from silicon chip

    Science.gov (United States)

    Ulbrich, M. H.; Fromherz, P.

    2005-10-01

    The development of stable neuroelectronic systems requires a stimulation of nerve cells from semiconductor devices without electrochemical effects at the electrolyte/solid interface and without damage of the cell membrane. The interaction must rely on a reversible opening of voltage-gated ion channels by capacitive coupling. In a proof-of-principle experiment, we demonstrate that Kv1.3 potassium channels expressed in HEK293 cells can be opened from an electrolyte/oxide/silicon (EOS) capacitor. A sufficient strength of electrical coupling is achieved by insulating silicon with a thin film of TiO2 to achieve a high capacitance and by removing NaCl from the electrolyte to enhance the resistance of the cell-chip contact. When a decaying voltage ramp is applied to the EOS capacitor, an outward current through the attached cell membrane is observed that is specific for Kv1.3 channels. An open probability up to fifty percent is estimated by comparison with a numerical simulation of the cell-chip contact.

  8. Capacitively coupled hybrid pixel assemblies for the CLIC vertex detector

    CERN Document Server

    AUTHOR|(SzGeCERN)734627; Benoit, Mathieu; Dannheim, Dominik; Dette, Karola; Hynds, Daniel; Kulis, Szymon; Peric, Ivan; Petric, Marko; Redford, Sophie; Sicking, Eva; Valerio, Pierpaolo

    2016-01-01

    The vertex detector at the proposed CLIC multi-TeV linear e+e- collider must have minimal material content and high spatial resolution, combined with accurate time-stamping to cope with the expected high rate of beam-induced backgrounds. One of the options being considered is the use of active sensors implemented in a commercial high-voltage CMOS process, capacitively coupled to hybrid pixel ASICs. A prototype of such an assembly, using two custom designed chips (CCPDv3 as active sensor glued to a CLICpix readout chip), has been characterised both in the lab and in beam tests at the CERN SPS using 120 GeV/c positively charged hadrons. Results of these characterisation studies are presented both for single and dual amplification stages in the active sensor. Pixel cross-coupling results are also presented, showing the sensitivity to placement precision and planarity of the glue layer.

  9. Facile preparation of polypyrrole/graphene oxide nanocomposites with large areal capacitance using electrochemical codeposition for supercapacitors

    Science.gov (United States)

    Zhou, Haihan; Han, Gaoyi; Xiao, Yaoming; Chang, Yunzhen; Zhai, Hua-Jin

    2014-10-01

    A simple and low-cost electrochemical codeposition method has been introduced to fabricate polypyrrole/graphene oxide (PPy/GO) nanocomposites and the areal capacitance of conducting polymer/GO composites is reported for the first time. Fourier transform infrared spectroscopy (FTIR), Transmission electron microscopy (TEM), X-ray photoelectron spectroscopy (XPS), and X-ray diffraction (XRD) are implemented to determine the PPy/GO nanocomposites are successfully prepared and the interaction between PPy and GO. The as-prepared PPy/GO nanocomposites show the curly sheet-like morphology, superior capacitive behaviors and cyclic stability. Furthermore, the varying deposition time is implemented to investigate the impact of the loading amount on electrochemical behavior of the composites, and a high areal capacitance of 152 mF cm-2 is achieved at 10 mV s-1 CV scan. However, the thicker films caused by the long deposition time would result in larger diffusion resistance of electrolyte ions, consequently exhibit the relatively lower capacitance value at the high current density. The GCD tests indicate moderate deposition time is more suitable for the fast charge/discharge. Considering the very simple and effective synthetic process, the PPy/GO nanocomposites with relatively high areal capacitance are competitive candidate for supercapacitor application, and its capacitive performances can be easily tuned by varying the deposition time.

  10. Tunable Lowpass Filter with RF MEMS Capacitance and Transmission Line

    Directory of Open Access Journals (Sweden)

    Shimul C. Saha

    2012-01-01

    Full Text Available We have presented an RF MEMS tuneable lowpass filter. Both distributed transmission lines and RF MEMS capacitances were used to replace the lumped elements. The use of RF MEMS capacitances gives the flexibility of tuning the cutoff frequency of the lowpass filter. We have designed a low-pass filter at 9–12 GHz cutoff frequency using the theory of stepped impedance transmission lines. A prototype of the filter has been fabricated using parallel plate capacitances. The variable shunt capacitances are formed by a combination of a number of parallel plate RF MEMS capacitances. The cutoff frequency is tuned from C to X band by actuating different combinations of parallel capacitive bridges. The measurement results agree well with the simulation result.

  11. Numerical analysis of capacitive pressure micro-sensors

    Institute of Scientific and Technical Information of China (English)

    WANG; Xiaomin; LI; Mingxuan; WANG; Chenghao

    2005-01-01

    Pseudo-spectral method is used to numerically model the diaphragm deflection of capacitive pressure micro-sensor under uniform load. The relationship between the capacitance of the micro-sensor and the load is then analyzed after the description of the computational principle. For normal mode micro-sensor, the tensile force on the diaphragm can be ignored and thereby the capacitance increases linearly with the load increase only when the load is so small that the resultant deflection is less than the diaphragm thickness. The linear relationship between the capacitance and the load turns to be nonlinear thereafter and the capacitance rises dramatically with the constant increase of the load. For touch mode micro-sensor, an algorithm to determine the touch radius of the diaphragm and substrate is presented and the curve of capacitance versus load is shown on the numerical results laying a theoretical foundation for micro-sensor design.

  12. Magnetic field tunable capacitive dielectric:ionic-liquid sandwich composites

    Science.gov (United States)

    Wu, Ye; Bhalla, Amar; Guo, Ruyan

    2016-03-01

    We examined the tunability of the capacitance for GaFeO3-ionic liquid-GaFeO3 composite material by external magnetic and electric field. Up to 1.6 folds of capacitance tunability could be achieved at 957 kHz with voltage 4 V and magnetic field 0.02 T applied. We show that the capacitance enhancement is due to the polarization coupling between dielectric layer and ionic liquid layer.

  13. Carrier Statistics and Quantum Capacitance Models of Graphene Nanoscroll

    Directory of Open Access Journals (Sweden)

    M. Khaledian

    2014-01-01

    schematic perfect scroll-like Archimedes spiral. The DOS model was derived at first, while it was later applied to compute the carrier concentration and quantum capacitance model. Furthermore, the carrier concentration and quantum capacitance were modeled for both degenerate and nondegenerate regimes, along with examining the effect of structural parameters and chirality number on the density of state and carrier concentration. Latterly, the temperature effect on the quantum capacitance was studied too.

  14. Capacitive tool standoff sensor for dismantlement tasks

    Energy Technology Data Exchange (ETDEWEB)

    Schmitt, D.J.; Weber, T.M. [Sandia National Labs., Albuquerque, NM (United States); Liu, J.C. [Univ. of Illinois, Urbana, IL (United States)

    1996-12-31

    A capacitive sensing technology has been applied to develop a Standoff Sensor System for control of robotically deployed tools utilized in Decontamination and Dismantlement (D and D) activities. The system combines four individual sensor elements to provide non-contact, multiple degree-of-freedom control of tools at distances up to five inches from a surface. The Standoff Sensor has been successfully integrated to a metal cutting router and a pyrometer, and utilized for real-time control of each of these tools. Experiments demonstrate that the system can locate stationary surfaces with a repeatability of 0.034 millimeters.

  15. Capacitively coupled hydrogen plasmas sustained by tailored voltage waveforms: excitation dynamics and ion flux asymmetry

    NARCIS (Netherlands)

    Bruneau, B.; Diomede, P.; Economou, D. J.; Longo, S.; Gans, T.; O’Connell, D.; Greb, A.; Johnson, E.; Booth, J. P.

    2016-01-01

    Parallel plate capacitively coupled plasmas in hydrogen at relatively high pressure ( 1 Torr) are excited with tailored voltage waveforms containing up to five frequencies. Predictions of a hybrid model combining a particle-in-cell simulation with Monte Carlo collisions and a fluid model

  16. Design, realization and characterization of a symmetrical triaxial capacitive accelerometer for medical applications

    NARCIS (Netherlands)

    Lötters, Joost Conrad; Lotters, Joost Conrad; Olthuis, Wouter; Veltink, Petrus H.; Bergveld, Piet

    1997-01-01

    Small triaxial accelerometers are needed in the medical field for the monitoring of mobility. For this purpose, a new highly symmetrical inherently triaxial capacitive accelerometer has been designed. The basic structure of the device consists of six capacitors surrounding a central mass which is

  17. A Flexible Capacitive Sensor with Encapsulated Liquids as Dielectrics

    Directory of Open Access Journals (Sweden)

    Yasunari Hotta

    2012-03-01

    Full Text Available Flexible and high-sensitive capacitive sensors are demanded to detect pressure distribution and/or tactile information on a curved surface, hence, wide varieties of polymer-based flexible MEMS sensors have been developed. High-sensitivity may be achieved by increasing the capacitance of the sensor using solid dielectric material while it deteriorates the flexibility. Using air as the dielectric, to maintain the flexibility, sacrifices the sensor sensitivity. In this paper, we demonstrate flexible and highly sensitive capacitive sensor arrays that encapsulate highly dielectric liquids as the dielectric. Deionized water and glycerin, which have relative dielectric constants of approximately 80 and 47, respectively, could increase the capacitance of the sensor when used as the dielectric while maintaining flexibility of the sensor with electrodes patterned on flexible polymer substrates. A reservoir of liquids between the electrodes was designed to have a leak path, which allows the sensor to deform despite of the incompressibility of the encapsulated liquids. The proposed sensor was microfabricated and demonstrated successfully to have a five times greater sensitivity than sensors that use air as the dielectric.

  18. CAPACITIVE TOMOGRAPHY FOR THE LOCATION OF PLASTIC PIPE

    Energy Technology Data Exchange (ETDEWEB)

    Brian J. Huber

    2002-10-30

    Throughout the utility industry, there is high interest in subsurface imaging of plastic, ceramic, and metallic objects because of the cost, reliability, and safety benefits available in avoiding impacts with the existing infrastructure and in reducing inappropriate excavations. Industry interest in locating plastic pipe has resulted in funding available for the development of technologies that enable this imaging. Gas Technology Institute (GTI) proposes to develop a compact and inexpensive capacitive tomography imaging sensor that takes the form of a flat plate or flexible mat that can be placed on the ground to image objects embedded in the soil. A compact, low-cost sensor that can image objects through soil could be applied to multiple operations and will produce a number of cost savings for the gas industry. In a stand-alone mode, it could be used to survey an area prior to excavation. The technology would improve the accuracy and reliability of any operation that involves excavation by locating or avoiding buried objects. An accurate subsurface image of an area will enable less costly keyhole excavations and other cost-saving techniques. Ground penetrating radar (GPR) has been applied to this area with limited success. Radar requires a high-frequency carrier to be injected into the soil: the higher the frequency, the greater the image resolution. Unfortunately, high-frequency radio waves are more readily absorbed by soil. Also, high-frequency operation raises the cost of the associated electronics. By contrast, the capacitive tomography sensor uses low frequencies with a multiple-element antenna to obtain good resolution. Low-frequency operation lowers the cost of the associated electronics while improving depth of penetration. The objective of this project is to combine several existing techniques in the area of capacitive sensing to quickly produce a demonstrable prototype. The sensor itself will take the form of a flat array of electrodes that can be

  19. Design and Test of Capacitive Micromachined Ultrasonic Transducer

    National Research Council Canada - National Science Library

    Hongliang Wang; Xiangjun Wang; Changde He; Chenyang Xue; Jijun Xiong; Wendong Zhang; Jing Miao; Yuping Li

    2014-01-01

      Currently, most capacitive micromachined ultrasound transducers, adopting surface sacrificial technology encounter various problems such as difficult cavity etch, low controllability of membrane thickness etc...

  20. A capacitive biosensor based on an interdigitated electrode with nanoislands.

    Science.gov (United States)

    Jung, Ha-Wook; Chang, Young Wook; Lee, Ga-yeon; Cho, Sungbo; Kang, Min-Jung; Pyun, Jae-Chul

    2014-09-24

    A capacitive biosensor based on an interdigitated electrode (IDE) with nanoislands was developed for label-free detection of antigen-antibody interactions. To enable sensitive capacitive detection of protein adsorption, the nanoislands were fabricated between finger electrodes of the IDE. The effect of the nanoislands on the sensitive capacitive measurement was estimated using horseradish peroxidase (HRP) as a model protein. Additionally, a parylene-A film was coated on the IDE with nanoislands to improve the efficiency of protein immobilization. By using HRP and hepatitis B virus surface antigen (HBsAg) as model analytes, the effect of the parylene-A film on the capacitive detection of protein adsorption was demonstrated.

  1. Effect of Additive Agent on the Electrochemical Capacitance of Activated Carbon

    Institute of Scientific and Technical Information of China (English)

    Wang Gui-Xin; Qu Mei-Zhen; Chen Li; Wang Guo-Ping; Zhang Qing-Tang; Yu Zuo-Long

    2004-01-01

    In order to compare the effect of additive agent on the electrochemical capacitance of activated carbon, three additive agents like carbon nanotubes (CNTs), activated carbon fibre (ACF)and acetylene black (AB) were added to activated carbon by ultrasonic dispersion. Two electrodes including 95wt.% activated carbon, 2wt.% additive agent and 3wt.% PTFE binder were prepared.Ecs were assembled in an argon-filled glove box by sandwiching a microporous separator (Celgard 2400) between two electrodes. 1.0 M LiClO4/ethylene carbonate (EC)-diethyl carbonate (DEC) (1:1in vol.) was used as the electrolyte. The performance of the Ecs was tested with constant current charge-discharge model between 0.0 and 3.0V at 298K using a battery-testing instrument under the same conditions.From the Fig. 1, we can know that the specific capacitance decreases with the current density increasing. As far as the three carbon materials, CNTs show better performance than others. At low current density, the specific capacitance of CNTs is adjacent to that of ACF, while higher than that of AB; At high current density, the specific capacitance of CNTs is higher than that of both ACF and AB. What's more, capacity fading of CNTs is smaller than those of both ACF and AB. At 10 mA/cm2 current density, the specific capacitance of CNTs is 1.33 times of that ACF and 1.58 times of that AB, respectively. From the CVs (Fig. 2), the capacitance of three materials is contributed mainly by double-layer, nonfaradically. The performance difference is ascribed to the structure and electrolyte reservoir: CNTs used have a wide diameter range between 20 and 100nm and hollow tube structure, ACF has a narrow diameter range and many micropores, AB are dots and cannot form good conductive net. All the above reasons lead the different electrochemical properties of three additive agents.

  2. Real-time and label-free monitoring of nanoparticle cellular uptake using capacitance-based assays

    Science.gov (United States)

    Lee, Rimi; Jo, Dong hyun; Chung, Sang J.; Na, Hee-Kyung; Kim, Jeong Hun; Lee, Tae Geol

    2016-01-01

    Nanoparticles have shown great potential as vehicles for the delivery of drugs, nucleic acids, and therapeutic proteins; an efficient, high-throughput screening method to analyze nanoparticle interaction with the cytomembrane would substantially improve the efficiency and accuracy of the delivery. Here, we developed a capacitance sensor array that monitored the capacitance values of nanoparticle-treated cells in a real-time manner, without the need for labeling. Upon cellular uptake of the nanoparticles, a capacitance peak was observed at a low frequency (e.g., 100 Hz) as a function of time based on zeta potential changes. In the high frequency region (e.g., 15–20 kHz), the rate of decreasing capacitance slowed as a function of time compared to the cell growth control group, due to increased cytoplasm resistance and decreased membrane capacitance and resistance. The information provided by our capacitance sensor array will be a powerful tool for scientists designing nanoparticles for specific purposes. PMID:27641838

  3. Characterization of active CMOS sensors for capacitively coupled pixel detectors

    Energy Technology Data Exchange (ETDEWEB)

    Hirono, Toko; Gonella, Laura; Janssen, Jens; Hemperek, Tomasz; Huegging, Fabian; Krueger, Hans; Wermes, Norbert [Institute of Physics, University of Bonn (Germany); Peric, Ivan [Institut fuer Prozessdatenverarbeitung und Elektronik, Karlsruher Institut fuer Technologie, Karlsruhe (Germany)

    2015-07-01

    Active CMOS pixel sensor is one of the most attractive candidates for detectors of upcoming particle physics experiments. In contrast to conventional sensors of hybrid detectors, signal processing circuit can be integrated in the active CMOS sensor. The characterization and optimization of the pixel circuit are indispensable to obtain a good performance from the sensors. The prototype chips of the active CMOS sensor were fabricated in the AMS 180nm and L-Foundry 150 nm CMOS processes, respectively a high voltage and high resistivity technology. Both chips have a charge sensitive amplifier and a comparator in each pixel. The chips are designed to be glued to the FEI4 pixel readout chip. The signals from 3 pixels of the prototype chips are capacitively coupled to the FEI4 input pads. We have performed lab tests and test beams to characterize the prototypes. In this presentation, the measurement results of the active CMOS prototype sensors are shown.

  4. Interaction phenomena in graphene seen through quantum capacitance.

    Science.gov (United States)

    Yu, G L; Jalil, R; Belle, Branson; Mayorov, Alexander S; Blake, Peter; Schedin, Frederick; Morozov, Sergey V; Ponomarenko, Leonid A; Chiappini, F; Wiedmann, S; Zeitler, Uli; Katsnelson, Mikhail I; Geim, A K; Novoselov, Kostya S; Elias, Daniel C

    2013-02-26

    Capacitance measurements provide a powerful means of probing the density of states. The technique has proved particularly successful in studying 2D electron systems, revealing a number of interesting many-body effects. Here, we use large-area high-quality graphene capacitors to study behavior of the density of states in this material in zero and high magnetic fields. Clear renormalization of the linear spectrum due to electron-electron interactions is observed in zero field. Quantizing fields lead to splitting of the spin- and valley-degenerate Landau levels into quartets separated by interaction-enhanced energy gaps. These many-body states exhibit negative compressibility but the compressibility returns to positive in ultrahigh B. The reentrant behavior is attributed to a competition between field-enhanced interactions and nascent fractional states.

  5. Perpendicular Magnetic Anisotropy in FePt Patterned Media Employing a CrV Seed Layer

    Directory of Open Access Journals (Sweden)

    Chun Dong

    2011-01-01

    Full Text Available Abstract A thin FePt film was deposited onto a CrV seed layer at 400°C and showed a high coercivity (~3,400 Oe and high magnetization (900–1,000 emu/cm3 characteristic of L10 phase. However, the magnetic properties of patterned media fabricated from the film stack were degraded due to the Ar-ion bombardment. We employed a deposition-last process, in which FePt film deposited at room temperature underwent lift-off and post-annealing processes, to avoid the exposure of FePt to Ar plasma. A patterned medium with 100-nm nano-columns showed an out-of-plane coercivity fivefold larger than its in-plane counterpart and a remanent magnetization comparable to saturation magnetization in the out-of-plane direction, indicating a high perpendicular anisotropy. These results demonstrate the high perpendicular anisotropy in FePt patterned media using a Cr-based compound seed layer for the first time and suggest that ultra-high-density magnetic recording media can be achieved using this optimized top-down approach.

  6. Perpendicular magnetic anisotropy of amorphous ferromagnetic CoSiB/[Pt,Au] multilayer

    Energy Technology Data Exchange (ETDEWEB)

    Jeong, S.; Yim, H. I. [Sookmyung Women' s University, Seoul (Korea, Republic of)

    2012-02-15

    Perpendicular magnetic anisotropy is being widely studied as a possible candidate for a high density spin-transfer torque magnetic random access memory. The key issues of a high-density spin-transfer torque magnetic random access memory are decreasing the switching current and the high thermal stability. In order to solve these problems, two approaches are suggested: One is the development a new amorphous ferromagnetic material as a pinned layer for a multilayer with a low saturated magnetization (M{sub s}) value because of the interface roughness between the two layers. The other is a search for the most suitable materials with high perpendicular magnetic anisotropy in order to have high thermal stability. In this work, we present an amorphous ferromagnetic Co{sub 75}Si{sub 15}B{sub 10} material and compare the magnetic properties of a [CoSiB (0.3, 0.4, 0.5 nm)/Pt (1.4 nm)]{sub 5} multilayer and new combinations [CoSiB (0.3, 0.4, 0.5 nm)/Au (1.5 nm)]{sub 5}.

  7. Perpendicular Magnetic Anisotropy in FePt Patterned Media Employing a CrV Seed Layer.

    Science.gov (United States)

    Kim, Hyunsu; Noh, Jin-Seo; Roh, Jong Wook; Chun, Dong Won; Kim, Sungman; Jung, Sang Hyun; Kang, Ho Kwan; Jeong, Won Yong; Lee, Wooyoung

    2011-12-01

    A thin FePt film was deposited onto a CrV seed layer at 400°C and showed a high coercivity (~3,400 Oe) and high magnetization (900-1,000 emu/cm(3)) characteristic of L 10 phase. However, the magnetic properties of patterned media fabricated from the film stack were degraded due to the Ar-ion bombardment. We employed a deposition-last process, in which FePt film deposited at room temperature underwent lift-off and post-annealing processes, to avoid the exposure of FePt to Ar plasma. A patterned medium with 100-nm nano-columns showed an out-of-plane coercivity fivefold larger than its in-plane counterpart and a remanent magnetization comparable to saturation magnetization in the out-of-plane direction, indicating a high perpendicular anisotropy. These results demonstrate the high perpendicular anisotropy in FePt patterned media using a Cr-based compound seed layer for the first time and suggest that ultra-high-density magnetic recording media can be achieved using this optimized top-down approach.

  8. Size effect in tension perpendicular to the grain

    DEFF Research Database (Denmark)

    Pedersen, Martin Bo Uhre; Clorius, Christian Odin; Damkilde, Lars;

    1999-01-01

    The strength in tension perpendicular to the grain is known to decrease with an increase in the stressed volume. Usually this size effect is explained on a stochastic basis, that is an explanation relying on an increased probability of encountering a strength reducing flaw when the volume of the ...... that the size effect can be explained on a deterministic basis. Arguments for such a simple deterministic explanation of size effect is found in finite element modelling using the orthotropic stiffness characteristics in the transverse plane of wood....

  9. HITPERM soft magnetic underlayers for perpendicular thin film media

    Science.gov (United States)

    Kumar, S.; Ohkubo, T.; Laughlin, D. E.

    2002-05-01

    In this work, a class of nanocrystalline alloys, HITPERM (Fe, Co)-M-B-Cu (M=Zr, Hf, Nb, and etc.) found to exhibit excellent soft-magnetic properties in bulk were used as soft-magnetic underlayers for perpendicular thin film media. A Ti intermediate layer was used to promote a (00ṡ2) texture and exchange de-couple the magnetic layer (CoCrPt) from the soft-magnetic underlayer. Specimens were deposited at both room and elevated temperature (˜ 250 °C). The results of x-ray diffraction and transmission electron microscope structural studies, along with magnetic properties are presented.

  10. Heat Assisted Magnetization Reversal on Perpendicular Magnetized Nano-Dot

    Directory of Open Access Journals (Sweden)

    Budi Purnama

    2011-05-01

    Full Text Available Heat assisted magnetization reversal on perpendicular magnetized nano-dots has been studied by solved Landau Lifshift-Gilbert equation for magnetic recording application. The heat assisted magnetization reversal scheme has been proven to be effectively reduces threshold field down to 90 %. Otherwise, this field doesn’t depend on heating time. To understand a read-write information process, cooling time dependence of threshold field has been evaluated. As a result, the threshold field depends on the cooling time and become constant after 300 ps. This result corresponds to data transfer of Hard Disc Drive about 30 Gb/s.

  11. Spin wave spectra in perpendicularly magnetized permalloy rings

    Energy Technology Data Exchange (ETDEWEB)

    Zhou, X.; Ding, J.; Adeyeye, A. O., E-mail: eleaao@nus.edu.sg [Information Storage Materials Laboratory, Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117576 (Singapore); Kostylev, M. [School of Physics, University of Western Australia, Crawley, Western Australia 6009 (Australia)

    2015-03-16

    The dynamic behavior of perpendicularly magnetized permalloy circular rings is systematically investigated as a function of film thickness using broadband field modulated ferromagnetic resonance spectroscopy. We observed the splitting of one spin wave mode into a family of dense resonance peaks for the rings, which is markedly different from the single mode observed for continuous films of the same thickness. As the excitation frequency is increased, the mode family observed for the rings gradually converges into one mode. With the increase in the film thickness, a sparser spectrum of modes is observed. Our experimental results are in qualitative agreement with the dynamic micromagnetic simulations.

  12. Coupled perpendicular magnetization in Fe/Cu/Fe trilayers

    Energy Technology Data Exchange (ETDEWEB)

    Repetto, D. [Max Planck Institut fuer Festkoerperforschung, Heisenbergstr. 1, D-70569 Stuttgart (Germany)]. E-mail: D.Repetto@fkf.mpg.de; Enders, A. [Max Planck Institut fuer Festkoerperforschung, Heisenbergstr. 1, D-70569 Stuttgart (Germany); Kern, K. [Max Planck Institut fuer Festkoerperforschung, Heisenbergstr. 1, D-70569 Stuttgart (Germany)

    2006-05-15

    Ultrathin epitaxial Fe films on Cu(1 0 0) with perpendicular magnetization have been used as templates for the preparation of FCC Fe/Cu/Fe trilayers. The magnetic anisotropy and the coupling of these films have been studied by in-situ magneto optical Kerr effect measurements and Kerr microscopy. The magnetic coupling of both Fe layers is found to be dominated by magnetostatic interaction. Adsorbate-induced spin reorientation in the top layer also causes spin reorientation in the bottom layer. The governing role of the Fe-vacuum interface for the magnetism of the whole trilayer is demonstrated.

  13. ANALYTICAL AND MATHCAD INTERSECTION BETWEEN TWO PERPENDICULAR AXES CYLINDERS

    Directory of Open Access Journals (Sweden)

    PETRESCU Ligia

    2015-06-01

    Full Text Available The intersection of two surfaces is a common line to both surfaces. This line is often called transition line. The authors propose an analytical and a computer graphics intersection between two perpendicular axes cylinders. The analytical expression of such intersection will be obtained and transposed on the development of one cylinder. The distance between the two cylinders axes is essential in the aspect of the transition line. This transition line can be also obtained, using the computer, by the MathCAD programme. Some samples are relevant in this subject, according to the distance between the cylinders.

  14. Nonlinear saturation of trapped electron modes via perpendicular particle diffusion.

    Science.gov (United States)

    Merz, F; Jenko, F

    2008-01-25

    In magnetized fusion plasmas, trapped electron mode (TEM) turbulence constitutes, together with ion temperature gradient (ITG) turbulence, the dominant source of anomalous transport on ion scales. While ITG modes are known to saturate via nonlinear zonal flow generation, this mechanism is shown to be of little importance for TEM turbulence in the parameter regime explored here. Instead, a careful analysis of the statistical properties of the ExB nonlinearity in the context of gyrokinetic turbulence simulations reveals that perpendicular particle diffusion is the dominant saturation mechanism. These findings allow for the construction of a rather realistic quasilinear model of TEM induced transport.

  15. Nanostructured conducting polymer based reagentless capacitive immunosensor.

    Science.gov (United States)

    Bandodkar, Amay Jairaj; Dhand, Chetna; Arya, Sunil K; Pandey, M K; Malhotra, Bansi D

    2010-02-01

    Nanostructured polyaniline (PANI) film electrophoretically fabricated onto indium-tin-oxide (ITO) coated glass plate has been utilized for development of an immunosensor based on capacitance change of a parallel plate capacitor (PPC) by covalently immobilizing anti-human IgG (Anti-HIgG) using N-ethyl-N'-(3-dimethylaminopropyl) carbodiimide and N-hydroxysuccinimide chemistry. These fabricated PANI/ITO and Anti-HIgG/PANI/ITO plates have been characterized using scanning electron microscopy, cyclic voltammetry, differential pulse voltammetry and Fourier transform infra-red studies. The capacitance measurements indicate that dielectric medium of this biologically modified PPC (Anti-HIgG/PANI/ITO) is sensitive to HIgG in 5 - 5 x 10(5) ng mL(-1) range and has lower detection limit of 1.87 ng mL(-1). The observed results reveal that this Anti-HIgG modified PPC can be used as a robust, easy-to-use, reagentless, sensitive and selective immunosensor for estimation of human IgG.

  16. Effects of multiple heteroatom species and topographic defects on electrocatalytic and capacitive performances of graphene

    Science.gov (United States)

    Fan, Mengmeng; Huang, Yang; Yuan, Fanshu; Hao, Qingli; Yang, Jiazhi; Sun, Dongping

    2017-10-01

    N-doped graphene has been widely researched as metal-free electrocatalyst and electrode material of energy storage devices but the effect of heteroatom species and topographic defects on these applications was rarely reported. We successfully prepared dual (N, S) or ternary heteroatoms (N, S, P)-doped graphene by simple hydrothermal and then carbonization treatment. Compared to singly N doping, multiple heteroatom species dopant is beneficial to positively move onset potential, approach four electron catalytic pathway in oxygen reduction reaction (ORR) due to the synergistic effect. The emerging topographic defects induced by removing heteroatoms and oxygen at high temperature also act as efficient active sites for positively shifting onset potential. Meanwhile, the porous ternary heteroatoms-doped graphene possesses a good capacitive performance such as high gravimetric capacitance (196.4 Fg-1 at 1 Ag-1), high retained rate (92.7%), 98% retention over 2000 recycling. The excellent capacitive properties derive from large specific surface area (943.5 m2 g-1), mesoporous structure, particularly the important role of abundant dopants of multiple heteroatom species. Therefore, we demonstrated the effect of heteroatom species and topographic defects on electrocatalyzing ORR and capacitive performance.

  17. Direct observation of massless domain wall dynamics in nanostripes with perpendicular magnetic anisotropy.

    Science.gov (United States)

    Vogel, J; Bonfim, M; Rougemaille, N; Boulle, O; Miron, I M; Auffret, S; Rodmacq, B; Gaudin, G; Cezar, J C; Sirotti, F; Pizzini, S

    2012-06-15

    Domain wall motion induced by nanosecond current pulses in nanostripes with perpendicular magnetic anisotropy (Pt/Co/AlO(x)) is shown to exhibit negligible inertia. Time-resolved magnetic microscopy during current pulses reveals that the domain walls start moving, with a constant speed, as soon as the current reaches a constant amplitude, and no or little motion takes place after the end of the pulse. The very low "mass" of these domain walls is attributed to the combination of their narrow width and high damping parameter α. Such a small inertia should allow accurate control of domain wall motion by tuning the duration and amplitude of the current pulses.

  18. Engineering perpendicular magnetic anisotropy in Fe via interstitial nitrogenation: N choose K

    Directory of Open Access Journals (Sweden)

    Hongbin Zhang

    2016-11-01

    Full Text Available In this work, combining experimental results and first principles calculations, we show that interstitial nitrogen not only serves for inducing tetragonality in α′-Fe8Nx but is also essential for achieving a high degree of perpendicular magneto-crystalline anisotropy, K. Our results demonstrate that the orbital magnetic moments of the iron atoms above and below N in the direction of magnetization are much more susceptible to the applied magnetic field than their in-plane counterparts, leading to a giant value of K as compared to a hypothetical distorted material without N.

  19. Engineering perpendicular magnetic anisotropy in Fe via interstitial nitrogenation: N choose K

    Science.gov (United States)

    Zhang, Hongbin; Dirba, Imants; Helbig, Tim; Alff, Lambert; Gutfleisch, Oliver

    2016-11-01

    In this work, combining experimental results and first principles calculations, we show that interstitial nitrogen not only serves for inducing tetragonality in α'-Fe8Nx but is also essential for achieving a high degree of perpendicular magneto-crystalline anisotropy, K. Our results demonstrate that the orbital magnetic moments of the iron atoms above and below N in the direction of magnetization are much more susceptible to the applied magnetic field than their in-plane counterparts, leading to a giant value of K as compared to a hypothetical distorted material without N.

  20. Preparation of Mn{sub 3-x}Ga Heusler thin films with perpendicular magnetic anisotropy

    Energy Technology Data Exchange (ETDEWEB)

    Glas, Manuel; Ebke, Daniel; Thomas, Patrick; Reiss, Guenter [Thin Films and Physics of Nanostructures, Physics Department, Bielefeld University (Germany)

    2011-07-01

    Recently, the integration of materials with perpendicular magnetic anisotropy into magnetic tunnel junctions (MTJs) has found a lot of attraction due to the predicted lowered current densities for spin transfer switching and a higher thermal stability. Because of the predicted high spin polarization and the low magnetic moment Mn{sub 3}Ga is a promising material for future spin torque transfer (STT) magnetic switching devices. For this work, we have fabricated Mn{sub 3-x}Ga Heusler thin films with varying stoichiometries into half magnetic tunnel junctions. The effect of Heusler film composition will be discussed with respect to the magnetic and crystal properties.

  1. Phased charging and discharging in capacitive desalinatio

    Energy Technology Data Exchange (ETDEWEB)

    Stadermann, Michael; Qu, Yatian; Santiago, Juan G.; Hemmatifar, Ali

    2017-09-12

    A system combines complete, ultra-thin cells into a monolithic and robust framework necessary for desalination applications which yields orders of magnitude faster desalination. The electrode pairs are located so that a flow of feed water flows through or around the electrode pairs with the flow perpendicular to sequentially applied electric potentials. The system is controlled to charge the series of electrode pairs sequentially or phased. That means the charging of the second electrode pair is delayed with regard to the charging of the first electrode pair and the charging of a third electrode pair is delayed with respect to the charging of the second electrode pair.

  2. Interaction of Mutually Perpendicular Magnetic Fields in HTSC

    Directory of Open Access Journals (Sweden)

    Vasilyev Aleksandr Fedorovich

    2015-11-01

    Full Text Available In this article a problem of interaction of the crossed magnetic fields in superconductors is considered. Superconducting materials have nonlinear magnetic properties. It allows using a non-linear magnetic susceptibility for measurement of feeble magnetic fields. We place a wire of superconducting material in a constant parallel uniform magnetic field. Then we let through a wire the alternating current leak. Interaction of mutual and perpendicular variation magnetic fields, with adequate accuracy is described by Ginzburg-Landau's equations. Approximate solution of the written equations is received. The component of a magnetic field parallel to a wire contains a variable component. Frequency of a variable component of the magnetic field is equal to the doubled current frequency. Amplitude of the variable component of the magnetic field is proportional to strength of the constant magnetic field. The experimental installation for research of interaction of mutually perpendicular magnetic fields is created. The cylinder from HTSC of ceramics of the YBa2Cu3O7-x was used as a sensor. Dependence of amplitude of the second harmonica of a variation magnetic field on strength of a constant magnetic field is received.

  3. Current source enhancements in Electrical Impedance Spectroscopy (EIS) to cancel unwanted capacitive effects

    Science.gov (United States)

    Zarafshani, Ali; Bach, Thomas; Chatwin, Chris; Xiang, Liangzhong; Zheng, Bin

    2017-03-01

    Electrical Impedance Spectroscopy (EIS) has emerged as a non-invasive imaging modality to detect and quantify functional or electrical properties related to the suspicious tumors in cancer screening, diagnosis and prognosis assessment. A constraint on EIS systems is that the current excitation system suffers from the effects of stray capacitance having a major impact on the hardware subsystem as the EIS is an ill-posed inverse problem which depends on the noise level in EIS measured data and regularization parameter in the reconstruction algorithm. There is high complexity in the design of stable current sources, with stray capacitance reducing the output impedance and bandwidth of the system. To confront this, we have designed an EIS current source which eliminates the effect of stray capacitance and other impacts of the capacitance via a variable inductance. In this paper, we present a combination of operational CCII based on a generalized impedance converter (OCCII-GIC) with a current source. The aim of this study is to use the EIS system as a biomedical imaging technique, which is effective in the early detection of breast cancer. This article begins with the theoretical description of the EIS structure, current source topologies and proposes a current conveyor in application of a Gyrator to eliminate the current source limitations and its development followed by simulation and experimental results. We demonstrated that the new design could achieve a high output impedance over a 3MHz frequency bandwidth when compared to other types of GIC circuits combined with an improved Howland topology.

  4. Assembly of polypyrrole nanotube@MnO{sub 2} composites with an improved electrochemical capacitance

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Jiayou; Zhang, Xiaoya; Liu, Jingya; Peng, Linfeng; Chen, Changlang; Huang, Zhiliang [School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430073 (China); Li, Liang, E-mail: msell08@163.com [School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430073 (China); Yu, Xianghua [School of Materials Science and Engineering, Wuhan Institute of Technology, Wuhan 430073 (China); Shang, Songmin, E-mail: shang.songmin@polyu.edu.hk [Institute of Textiles and Clothing, The Hong Kong Polytechnic University, Hong Kong (China)

    2015-08-15

    Graphical abstract: - Highlights: • PPy nanotube@MnO{sub 2} composites have been prepared. • The thickness of MnO{sub 2} coating can be tuned by the concentration of KMnO{sub 4}. • Synergistic effect between PPy and MnO{sub 2} generates better capacitance performance. • The composites exhibit high specific capacitance and good cycle stability. - Abstract: A facile strategy is presented to fabricate polypyrrole nanotube@manganese dioxide (PPy@MnO{sub 2}) composites. The effect of KMnO{sub 4} concentration on the morphology and property of PPy@MnO{sub 2} composites is investigated. The microstrucutres and properties of the resulting PPy@MnO{sub 2} composites are characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy dispersive X-ray diffraction (EDX), X-ray diffraction (XRD), thermo-gravimetric analysis (TGA) and electrochemical measurements. The results indicate that the PPy@MnO{sub 2} composites possess high specific capacitance and good cyclic stability due to the coating of MnO{sub 2} onto PPy nanotubes. The specific capacitance of 403 F/g for the PPy@MnO{sub 2} composite is obtained from galvanostatic charge–discharge experiment at a current density of 1 A/g, exhibiting the potential application for supercapacitors.

  5. Electron heating in low pressure capacitive discharges revisited

    Science.gov (United States)

    Kawamura, E.; Lieberman, M. A.; Lichtenberg, A. J.

    2014-12-01

    The electrons in capacitively coupled plasmas (CCPs) absorb energy via ohmic heating due to electron-neutral collisions and stochastic heating due to momentum transfer from high voltage moving sheaths. We use Particle-in-Cell (PIC) simulations to explore these heating mechanisms and to compare the PIC results with available theories on ohmic and stochastic heating. The PIC results for ohmic heating show good agreement with the ohmic heating calculation of Lafleur et al. [Phys. Plasmas 20, 124503 (2013)]. The PIC results for stochastic heating in low pressure CCPs with collisionless sheaths show good agreement with the stochastic heating model of Kaganovich et al. [IEEE Trans. Plasma Sci. 34, 696 (2006)], which revises the hard wall asymptotic model of Lieberman [IEEE Trans. Plasma Sci. 16, 638 (1988)] by taking current continuity and bulk oscillation into account.

  6. Infrared light excites cells by changing their electrical capacitance

    Science.gov (United States)

    Shapiro, Mikhail G.; Homma, Kazuaki; Villarreal, Sebastian; Richter, Claus-Peter; Bezanilla, Francisco

    2012-01-01

    Optical stimulation has enabled important advances in the study of brain function and other biological processes, and holds promise for medical applications ranging from hearing restoration to cardiac pace making. In particular, pulsed laser stimulation using infrared wavelengths >1.5 μm has therapeutic potential based on its ability to directly stimulate nerves and muscles without any genetic or chemical pre-treatment. However, the mechanism of infrared stimulation has been a mystery, hindering its path to the clinic. Here we show that infrared light excites cells through a novel, highly general electrostatic mechanism. Infrared pulses are absorbed by water, producing a rapid local increase in temperature. This heating reversibly alters the electrical capacitance of the plasma membrane, depolarizing the target cell. This mechanism is fully reversible and requires only the most basic properties of cell membranes. Our findings underscore the generality of pulsed infrared stimulation and its medical potential. PMID:22415827

  7. A novel design of micromachined capacitive Lamb wave transducers

    Science.gov (United States)

    Ge, Lifeng

    2006-11-01

    A new design for micromachined capacitive Lamb wave transducers (mCLWT) has been developed. The design is based on a theoretical TDK model previously developed for groove ultrasonic transducers. By the investigation of the dynamic behavior of a rectangular high aspect ratio diaphragm of the mCLWTs, the second order bending mode of the diaphragm is exploited to excite and detect Lamb wave. The new exiting mechanism can minimize the energy of the acoustic radiation at the normal direction of the diaphragm so as to provide more energy coupled into the Lamb wave in the silicon substrate. Also, the natural frequencies and mode shapes of such a mCLWT can be determined accurately from its geometry and materials used, so the TDK model provides guidance for the optimal design of mCLWTs.

  8. Pharmaceutical Pill Counting and Inspection Using a Capacitive Sensor

    Directory of Open Access Journals (Sweden)

    Ganesan LETCHUMANAN

    2008-01-01

    Full Text Available A capacitive sensor for high-speed counting and inspection of pharmaceutical products is proposed and evaluated. The sensor is based on a patented Electrostatic Field Sensor (EFS device, previously developed by Sparc Systems Limited. However, the sensor head proposed in this work has a significantly different geometry and has been designed with a rectangular inspection aperture of 160mm × 21mm, which best meets applications where a larger count throughput is required with a single sensor. Finite element modelling has been used to simulate the electrostatic fields generated within the sensor, and as a design tool for optimising the sensor head configuration. The actual and simulated performance of the sensor is compared and analysed in terms of the sensor performance at discriminating between damaged products or detection of miscount errors.

  9. Capacitive immunosensor for C-reactive protein quantification

    KAUST Repository

    Sapsanis, Christos

    2015-08-02

    We report an agglutination-based immunosensor for the quantification of C-reactive protein (CRP). The developed immunoassay sensor requires approximately 15 minutes of assay time per sample and provides a sensitivity of 0.5 mg/L. We have measured the capacitance of interdigitated electrodes (IDEs) and quantified the concentration of added analyte. The proposed method is a label free detection method and hence provides rapid measurement preferable in diagnostics. We have so far been able to quantify the concentration to as low as 0.5 mg/L and as high as 10 mg/L. By quantifying CRP in serum, we can assess whether patients are prone to cardiac diseases and monitor the risk associated with such diseases. The sensor is a simple low cost structure and it can be a promising device for rapid and sensitive detection of disease markers at the point-of-care stage.

  10. A novel heuristic algorithm for capacitated vehicle routing problem

    Science.gov (United States)

    Kır, Sena; Yazgan, Harun Reşit; Tüncel, Emre

    2017-02-01

    The vehicle routing problem with the capacity constraints was considered in this paper. It is quite difficult to achieve an optimal solution with traditional optimization methods by reason of the high computational complexity for large-scale problems. Consequently, new heuristic or metaheuristic approaches have been developed to solve this problem. In this paper, we constructed a new heuristic algorithm based on the tabu search and adaptive large neighborhood search (ALNS) with several specifically designed operators and features to solve the capacitated vehicle routing problem (CVRP). The effectiveness of the proposed algorithm was illustrated on the benchmark problems. The algorithm provides a better performance on large-scaled instances and gained advantage in terms of CPU time. In addition, we solved a real-life CVRP using the proposed algorithm and found the encouraging results by comparison with the current situation that the company is in.

  11. Image Reconstruction Using a Genetic Algorithm for Electrical Capacitance Tomography

    Institute of Scientific and Technical Information of China (English)

    MOU Changhua; PENG Lihui; YAO Danya; XIAO Deyun

    2005-01-01

    Electrical capacitance tomography (ECT) has been used for more than a decade for imaging dielectric processes. However, because of its ill-posedness and non-linearity, ECT image reconstruction has always been a challenge. A new genetic algorithm (GA) developed for ECT image reconstruction uses initial results from a linear back-projection, which is widely used for ECT image reconstruction to optimize the threshold and the maximum and minimum gray values for the image. The procedure avoids optimizing the gray values pixel by pixel and significantly reduces the search space dimension. Both simulations and static experimental results show that the method is efficient and capable of reconstructing high quality images. Evaluation criteria show that the GA-based method has smaller image error and greater correlation coefficients. In addition, the GA-based method converges quickly with a small number of iterations.

  12. Functionalization of Petroleum Coke-Derived Carbon for Synergistically Enhanced Capacitive Performance

    Science.gov (United States)

    Zhang, Yan; Li, Xuejin; Huang, Jufeng; Xing, Wei; Yan, Zifeng

    2016-03-01

    Petroleum coke is a valuable and potential source for clean energy storage if it could be modified legitimately and facilely. In the present study, porous carbon with high surface area and abundant oxygen-containing groups was prepared from petroleum coke by chemical activation and modification processes. The as-prepared carbon exhibits a high surface area (1129 m2 · g-1) and stable micrographic structure. It presents a high specific capacitance and excellent rate performance in KOH electrolyte. Even at an ultrahigh current density of 50 A · g-1, the specific capacitance of the prepared carbon can still reach up to an unprecedented value of 261 F · g-1 with a superhigh retention rate of 81 %. In addition, the energy density of this material in aqueous electrolyte can be as high as 13.9 Wh · kg-1. The high energy density and excellent rate performance ensure its prosperous application in high-power energy storage system.

  13. Perpendicular magnetic anisotropy in amorphous ferromagnetic CoSiB/Pt multilayers.

    Science.gov (United States)

    Hwang, J Y; Park, J S; Yim, H I; Kim, T W; Shin, D Y; Lee, S B

    2011-01-01

    Magnetic anisotropy properties of amorphous ferromagnetic CoSiB/Pt multilayers with perpendicular magnetic anisotropy (PMA, K(u)) were systematically investigated as a function of CoSiB layer thickness (t(coSiB)) and Pt layer thickness (t(Pt)). In two series of [CoSiB t(coSiB)Pt t(P1)]5 multilayers, the perpendicular coercivity (H(c)) increased to reach a maximum and then decreased with further increase in both t(coSiB) and t(Pt), due to intermixing of CoSiB/Pt interfaces. Particularly, using the amorphous soft magnetic CoSiB, the coercivity became very sensitive to the CoSiB thickness. These multilayer films exhibited a high K(u) of 2 x 10(6) erg/cc and a high H(c) of 360 Oe with marked squareness. It was found that even after annealing at 350 degrees C, the CoSiB/Pt multilayers had a high PMA and their H(c) increased.

  14. Distributed Capacitance of Coaxial Line With Perturbed Walls

    Institute of Scientific and Technical Information of China (English)

    2000-01-01

    Perturbation method of boundary geometry(PMOBG) used in Laplacian problems is dealt with and the three-term perturbation expression of distributed capacitance of a coaxial line with perturbed walls is obtained. As an example,four-order expression of distributed capacitance of a elliptic coaxial line with small eccentricity is given.

  15. Capacitance tuning of nanoscale split-ring resonators

    DEFF Research Database (Denmark)

    Jeppesen, Claus; Xiao, Sanshui; Mortensen, Niels Asger;

    2010-01-01

    In this paper, we investigate the capacitance tuning of nanoscale split-ring resonators. Based on a simple LC circuit model (LC-model), we derive an expression where the inductance is proportional to the area while the capacitance reflects the aspect ratio of the slit. The resonance frequency may...

  16. Capacitance tuning of nanoscale split-ring resonators

    DEFF Research Database (Denmark)

    Jeppesen, Claus; Mortensen, Asger; Kristensen, Anders

    2009-01-01

    We investigate the capacitance tuning of nanoscale split-ring resonators. Based on a simple inductor-capacitor circuit model, we derive an expression, where the inductance is proportional to the area while the capacitance reflects the aspect ratio of the slit. The resonance frequency may thus be ...

  17. Nonlinear dynamics of capacitive charging and desalination by porous electrodes

    NARCIS (Netherlands)

    Biesheuvel, P.M.; Bazant, M.Z.

    2010-01-01

    The rapid and efficient exchange of ions between porous electrodes and aqueous solutions is important in many applications, such as electrical energy storage by supercapacitors, water desalination and purification by capacitive deionization, and capacitive extraction of renewable energy from a salin

  18. Electric field theory and the fallacy of void capacitance

    DEFF Research Database (Denmark)

    McAllister, Iain Wilson

    1991-01-01

    The concept of the capacitance of a gaseous void is discussed as applied to electrical insulation science. The most pertinent aspect of the capacitance definition is that of reference to a single-valued potential difference between surfaces. This implies that these surfaces must be surfaces...

  19. Nanoscale capacitance: A quantum tight-binding model

    Science.gov (United States)

    Zhai, Feng; Wu, Jian; Li, Yang; Lu, Jun-Qiang

    2017-01-01

    Landauer-Buttiker formalism with the assumption of semi-infinite electrodes as reservoirs has been the standard approach in modeling steady electron transport through nanoscale devices. However, modeling dynamic electron transport properties, especially nanoscale capacitance, is a challenging problem because of dynamic contributions from electrodes, which is neglectable in modeling macroscopic capacitance and mesoscopic conductance. We implement a self-consistent quantum tight-binding model to calculate capacitance of a nano-gap system consisting of an electrode capacitance C‧ and an effective capacitance Cd of the middle device. From the calculations on a nano-gap made of carbon nanotube with a buckyball therein, we show that when the electrode length increases, the electrode capacitance C‧ moves up while the effective capacitance Cd converges to a value which is much smaller than the electrode capacitance C‧. Our results reveal the importance of electrodes in modeling nanoscale ac circuits, and indicate that the concepts of semi-infinite electrodes and reservoirs well-accepted in the steady electron transport theory may be not applicable in modeling dynamic transport properties.

  20. Capacitive bioanodes enable renewable energy storage in microbial fuel cells.

    Science.gov (United States)

    Deeke, Alexandra; Sleutels, Tom H J A; Hamelers, Hubertus V M; Buisman, Cees J N

    2012-03-20

    We developed an integrated system for storage of renewable electricity in a microbial fuel cell (MFC). The system contained a capacitive electrode that was inserted into the anodic compartment of an MFC to form a capacitive bioanode. This capacitive bioanode was compared with a noncapacitive bioanode on the basis of performance and storage capacity. The performance and storage capacity were investigated during polarization curves and charge-discharge experiments. During polarization curves the capacitive electrode reached a maximum current density of 1.02 ± 0.04 A/m(2), whereas the noncapacitive electrode reached a current density output of only 0.79 ± 0.03 A/m(2). During the charge-discharge experiment with 5 min of charging and 20 min of discharging, the capacitive electrode was able to store a total of 22,831 C/m(2), whereas the noncapacitive electrode was only able to store 12,195 C/m(2). Regarding the charge recovery of each electrode, the capacitive electrode was able to recover 52.9% more charge during each charge-discharge experiment compared with the noncapacitive electrode. The capacitive electrode outperformed the noncapacitive electrode throughout each charge-discharge experiment. With a capacitive electrode it is possible to use the MFC simultaneously for production and storage of renewable electricity.

  1. Large Capacitance Measurement by Multiple Uses of MBL Charge Sensor

    Science.gov (United States)

    Lee, Jung Sook; Chae, Min; Kim, Jung Bog

    2010-01-01

    A recent article by Morse described interesting electrostatics experiments using an MBL charge sensor. In this application, the charge sensor has a large capacitance compared to the charged test object, so nearly all charges can be transferred to the sensor capacitor from the capacitor to be measured. However, the typical capacitance of commercial…

  2. Characterizing Inductive and Capacitive Nonlinear RLC Circuits : A Passivity Test

    NARCIS (Netherlands)

    García-Canseco, Eloísa; Jeltsema, Dimitri; Ortega, Romeo; Scherpen, Jacquelien M.A.

    2004-01-01

    Linear time-invariant RLC circuits are said to be inductive (capacitive) if the current waveform in sinusoidal steady-state has a negative (resp., positive) phase shift with respect to the voltage. Furthermore, it is known that the circuit is inductive (capacitive) if and only if the magnetic energy

  3. Magnetic domain patterns on strong perpendicular magnetization of Co/Ni multilayers as spintronics materials: I. Dynamic observations.

    Science.gov (United States)

    Suzuki, Masahiko; Kudo, Kazue; Kojima, Kazuki; Yasue, Tsuneo; Akutsu, Noriko; Diño, Wilson Agerico; Kasai, Hideaki; Bauer, Ernst; Koshikawa, Takanori

    2013-10-09

    Materials with perpendicular magnetic anisotropy can reduce the threshold current density of the current-induced domain wall motion. Co/Ni multilayers show strong perpendicular magnetic anisotropy and therefore it has become a highly potential candidate of current-induced domain wall motion memories. However, the details of the mechanism which stabilizes the strong perpendicular magnetization in Co/Ni multilayers have not yet been understood. In the present work, the evolution of the magnetic domain structure of multilayers consisting of pairs of 2 or 3 monolayers (ML) of Ni and 1 ML of Co on W(110) was investigated during growth with spin-polarized low-energy electron microscopy. An interesting phenomenon, that the magnetic domain structure changed drastically during growth, was revealed. In the early stages of the growth the magnetization alternated between in-plane upon Co deposition and out-of-plane upon Ni deposition. The change of the magnetization direction occurred within a range of less than 0.2 ML during Ni or Co deposition, with break-up of the existing domains followed by growth of new domains. The Ni and Co thickness at which the magnetization direction switched shifted gradually with the number of Co/Ni pairs. Above 3-4 Co/Ni pairs it stayed out-of-plane. The results indicate clearly that the Co-Ni interfaces play the important role of enhancing the perpendicular magnetic anisotropy.

  4. Effect of aging and annealing on perpendicular magnetic anisotropy of ultra-thin CoPt films

    Science.gov (United States)

    Hara, R.; Hayakawa, K.; Ebata, K.; Sugita, R.

    2016-05-01

    The effect of aging and annealing on the magnetic properties of ultra-thin CoPt films with a Ru underlayer was investigated. For the 3 nm thick CoPt film aged in the air, the decrease of the saturation magnetic moment ms, the drastic increase of the perpendicular coercivity Hc⊥ and the perpendicular anisotropy were observed. This is because the surface layer of the CoPt film was oxidized and the bottom layer with high perpendicular anisotropy due to lattice distortion remained. For the annealed 3 nm thick CoPt film with a Pt protective layer, rising the annealing temperature Ta led to the decrease of ms, the decrease after increase of Hc⊥, and the decrease of the perpendicular squareness ratio S⊥ at Ta of 400 ∘C. The origins of effect of annealing were considered to be the grain boundary diffusion and the bulk diffusion of Ru and Pt into the CoPt film, and relaxation of the lattice distortion.

  5. Effect of aging and annealing on perpendicular magnetic anisotropy of ultra-thin CoPt films

    Directory of Open Access Journals (Sweden)

    R. Hara

    2016-05-01

    Full Text Available The effect of aging and annealing on the magnetic properties of ultra-thin CoPt films with a Ru underlayer was investigated. For the 3 nm thick CoPt film aged in the air, the decrease of the saturation magnetic moment ms, the drastic increase of the perpendicular coercivity Hc⊥ and the perpendicular anisotropy were observed. This is because the surface layer of the CoPt film was oxidized and the bottom layer with high perpendicular anisotropy due to lattice distortion remained. For the annealed 3 nm thick CoPt film with a Pt protective layer, rising the annealing temperature Ta led to the decrease of ms, the decrease after increase of Hc⊥, and the decrease of the perpendicular squareness ratio S⊥ at Ta of 400 ∘C. The origins of effect of annealing were considered to be the grain boundary diffusion and the bulk diffusion of Ru and Pt into the CoPt film, and relaxation of the lattice distortion.

  6. Capacitive Detection of Low-Enthalpy, Higher-Order Phase Transitions in Synthetic and Natural Composition Lipid Membranes.

    Science.gov (United States)

    Taylor, Graham J; Heberle, Frederick A; Seinfeld, Jason S; Katsaras, John; Collier, C Patrick; Sarles, Stephen A

    2017-09-05

    In-plane lipid organization and phase separation in natural membranes play key roles in regulating many cellular processes. Highly cooperative, first-order phase transitions in model membranes consisting of few lipid components are well understood and readily detectable via calorimetry, densitometry, and fluorescence. However, far less is known about natural membranes containing numerous lipid species and high concentrations of cholesterol, for which thermotropic transitions are undetectable by the above-mentioned techniques. We demonstrate that membrane capacitance is highly sensitive to low-enthalpy thermotropic transitions taking place in complex lipid membranes. Specifically, we measured the electrical capacitance as a function of temperature for droplet interface bilayer model membranes of increasing compositional complexity, namely, (a) a single lipid species, (b) domain-forming ternary mixtures, and (c) natural brain total lipid extract (bTLE). We observed that, for single-species lipid bilayers and some ternary compositions, capacitance exhibited an abrupt, temperature-dependent change that coincided with the transition detected by other techniques. In addition, capacitance measurements revealed transitions in mixed-lipid membranes that were not detected by the other techniques. Most notably, capacitance measurements of bTLE bilayers indicated a transition at ∼38 °C not seen with any other method. Likewise, capacitance measurements detected transitions in some well-studied ternary mixtures that, while known to yield coexisting lipid phases, are not detected with calorimetry or densitometry. These results indicate that capacitance is exquisitely sensitive to low-enthalpy membrane transitions because of its sensitivity to changes in bilayer thickness that occur when lipids and excess solvent undergo subtle rearrangements near a phase transition. Our findings also suggest that heterogeneity confers stability to natural membranes that function near

  7. Novel graphene-like electrodes for capacitive deionization.

    Science.gov (United States)

    Li, Haibo; Zou, Linda; Pan, Likun; Sun, Zhuo

    2010-11-15

    Capacitive deionization (CDI) is a novel technology that has been developed for removal of charged ionic species from salty water, such as salt ions. The basic concept of CDI, as well as electrosorption, is to force charged ions toward oppositely polarized electrodes through imposing a direct electric field to form a strong electrical double layer and hold the ions. Once the electric field disappears, the ions are instantly released back to the bulk solution. CDI is an alternative low-energy consumption desalination technology. Graphene-like nanoflakes (GNFs) with relatively high specific surface area have been prepared and used as electrodes for capacitive deionization. The GNFs were synthesized by a modified Hummers' method using hydrazine for reduction. They were characterized by atomic force microscopy, N2 adsorption at 77 K and electrochemical workstation. It was found that the ratio of nitric acid and sulfuric acid plays a vital role in determining the specific surface area of GNFs. Its electrosorption performance was much better than commercial activated carbon (AC), suggesting a great potential in capacitive deionisation application. Further, the electrosorptive performance of GNFs electrodes with different bias potentials, flow rates and ionic strengths were measured and the electrosorption isotherm and kinetics were investigated. The results showed that GNFs prepared by this process had the specific surface area of 222.01 m²/g. The specific electrosorptive capacity of the GNFs was 23.18 µmol/g for sodium ions (Na+) when the initial concentration was at 25 mg/L, which was higher than that of previously reported data using graphene and AC under the same experimental condition. In addition, the equilibrium electrosorption capacity was determined as 73.47 µmol/g at 2.0 V by fitting data through the Langmuir isotherm, and the rate constant was found to be 1.01 min⁻¹ by fitting data through pseudo first-order adsorption. The results suggested that the

  8. Study of CMOS integrated signal processing circuit in capacitive sensors

    Institute of Scientific and Technical Information of China (English)

    CAO Yi-jiang; YU Xiang; WANG Lei

    2007-01-01

    A CMOS integrated signal processing circuit based on capacitance resonance principle whose structure is simple in capacitive sensors is designed. The waveform of output voltage is improved by choosing bootstrap reference current mirror with initiate circuit, CMOS analogy switch and positive feedback of double-stage inverter in the circuit. Output voltage of this circuit is a symmetric square wave signal. The variation of sensitive capacitance, which is part of the capacitive sensors, can be denoted by the change of output voltage's frequency. The whole circuit is designed with 1.5 μm P-well CMOS process and simulated by PSpice software.Output frequency varies from 261.05 kHz to 47.93 kHz if capacitance varies in the range of 1PF~15PF. And the variation of frequency can be easily detected using counter or SCU.

  9. Nonlinear Dynamics of Capacitive Charging and Desalination by Porous Electrodes

    CERN Document Server

    Biesheuvel, P M

    2009-01-01

    The rapid and efficient exchange of ions between porous electrodes and aqueous solutions is important in many applications, such as electrical energy storage by super-capacitors, water desalination and purification by capacitive deionization (or desalination), and capacitive extraction of renewable energy from a salinity difference. Here, we present a unified mean-field theory for capacitive charging and desalination by ideally polarizable porous electrodes (without Faradaic reactions or specific adsorption of ions) in the limit of thin double layers (compared to typical pore dimensions). We illustrate the theory in the case of a dilute, symmetric, binary electrolyte using the Gouy-Chapman-Stern (GCS) model of the double layer, for which simple formulae are available for salt adsorption and capacitive charging of the diffuse part of the double layer. We solve the full GCS mean-field theory numerically for realistic parameters in capacitive deionization, and we derive reduced models for two limiting regimes wi...

  10. Perpendicular switching of a single ferromagnetic layer induced by in-plane current injection.

    Science.gov (United States)

    Miron, Ioan Mihai; Garello, Kevin; Gaudin, Gilles; Zermatten, Pierre-Jean; Costache, Marius V; Auffret, Stéphane; Bandiera, Sébastien; Rodmacq, Bernard; Schuhl, Alain; Gambardella, Pietro

    2011-08-11

    Modern computing technology is based on writing, storing and retrieving information encoded as magnetic bits. Although the giant magnetoresistance effect has improved the electrical read out of memory elements, magnetic writing remains the object of major research efforts. Despite several reports of methods to reverse the polarity of nanosized magnets by means of local electric fields and currents, the simple reversal of a high-coercivity, single-layer ferromagnet remains a challenge. Materials with large coercivity and perpendicular magnetic anisotropy represent the mainstay of data storage media, owing to their ability to retain a stable magnetization state over long periods of time and their amenability to miniaturization. However, the same anisotropy properties that make a material attractive for storage also make it hard to write to. Here we demonstrate switching of a perpendicularly magnetized cobalt dot driven by in-plane current injection at room temperature. Our device is composed of a thin cobalt layer with strong perpendicular anisotropy and Rashba interaction induced by asymmetric platinum and AlOx interface layers. The effective switching field is orthogonal to the direction of the magnetization and to the Rashba field. The symmetry of the switching field is consistent with the spin accumulation induced by the Rashba interaction and the spin-dependent mobility observed in non-magnetic semiconductors, as well as with the torque induced by the spin Hall effect in the platinum layer. Our measurements indicate that the switching efficiency increases with the magnetic anisotropy of the cobalt layer and the oxidation of the aluminium layer, which is uppermost, suggesting that the Rashba interaction has a key role in the reversal mechanism. To prove the potential of in-plane current switching for spintronic applications, we construct a reprogrammable magnetic switch that can be integrated into non-volatile memory and logic architectures. This device is simple

  11. Creatinine Diffusion Modeling in Capacitive Sensors

    Science.gov (United States)

    Mohabbati-Kalejahi, Elham; Azimirad, Vahid; Bahrami, Manouchehr

    2016-12-01

    In this paper, creatinine diffusion in capacitive sensors is discussed. The factors influencing the response time of creatinine biosensors are mathematically formulated and then three novel approaches for decreasing the response time are presented. At first, a piezoelectric actuator is used to vibrate the microtube that contains the blood sample, in order to reduce the viscosity of blood, and thus to increase the coefficient of diffusion. Then, the blood sample is assumed to be pushed through a porous medium, and the relevant conditions are investigated. Finally, the effect of the dentate shape of dielectric on response time is studied. The algorithms and the mathematical models are presented and discussed, and the results of simulations are illustrated. The response times for the first, second and third method are 60, 0.036 and about 31 s, respectively. It is also found that pumping results in very fast responses.

  12. Fund allocation using capacitated vehicle routing problem

    Science.gov (United States)

    Mamat, Nur Jumaadzan Zaleha; Jaaman, Saiful Hafizah; Ahmad, Rokiah Rozita; Darus, Maslina

    2014-09-01

    In investment fund allocation, it is unwise for an investor to distribute his fund into several assets simultaneously due to economic reasons. One solution is to allocate the fund into a particular asset at a time in a sequence that will either maximize returns or minimize risks depending on the investor's objective. The vehicle routing problem (VRP) provides an avenue to this issue. VRP answers the question on how to efficiently use the available fleet of vehicles to meet a given service demand, subjected to a set of operational requirements. This paper proposes an idea of using capacitated vehicle routing problem (CVRP) to optimize investment fund allocation by employing data of selected stocks in the FTSE Bursa Malaysia. Results suggest that CRVP can be applied to solve the issue of investment fund allocation and increase the investor's profit.

  13. Capacitated dynamic lot sizing with capacity acquisition

    DEFF Research Database (Denmark)

    Li, Hongyan; Meissner, Joern

    2011-01-01

    batch, along with inventory carrying costs. The production per period is limited by a capacity restriction. The underlying capacity must be purchased up front for the upcoming season and remains constant over the entire season. We assume that the capacity acquisition cost is smooth and convex......One of the fundamental problems in operations management is determining the optimal investment in capacity. Capacity investment consumes resources and the decision, once made, is often irreversible. Moreover, the available capacity level affects the action space for production and inventory...... planning decisions directly. In this article, we address the joint capacitated lot-sizing and capacity-acquisition problems. The firm can produce goods in each of the finite periods into which the production season is partitioned. Fixed as well as variable production costs are incurred for each production...

  14. [Wireless ECG measurement system with capacitive coupling].

    Science.gov (United States)

    Aleksandrowicz, Adrian; Walter, Marian; Leonhardt, Steffen

    2007-04-01

    This paper describes a measurement system that captures an electrocardiogram (ECG) using capacitively coupled electrodes. The measurement system was integrated into an off-the-shelf office chair (so-called "Aachen SmartChair"). Whereas for classical ECG measurement adhesive is used to attach conductively coupled electrodes to bare skin, the system presented allows ECG measurement through clothing without direct skin contact. Furthermore, a ZigBee communication module was integrated to allow wireless transmission of ECG data to a PC or an ICU patient monitor. For system validation, classical ECG using conductive electrodes was obtained simultaneously. First measurement results, including variations of cloth thickness and material, are presented and some of the system-specific problems of this approach are discussed.

  15. Perpendicular magnetic anisotropy and magnetization dynamics in oxidized CoFeAl films.

    Science.gov (United States)

    Wu, Di; Zhang, Zhe; Li, Le; Zhang, Zongzhi; Zhao, H B; Wang, J; Ma, B; Jin, Q Y

    2015-07-20

    Half-metallic Co-based full-Heusler alloys with perpendicular magnetic anisotropy (PMA), such as Co2FeAl in contact with MgO, are receiving increased attention recently due to its full spin polarization for high density memory applications. However, the PMA induced by MgO interface can only be realized for very thin magnetic layers (usually below 1.3 nm), which would have strong adverse effects on the material properties of spin polarization, Gilbert damping parameter, and magnetic stability. In order to solve this issue, we fabricated oxidized Co50Fe25Al25 (CFAO) films with proper thicknesses without employing the MgO layer. The samples show controllable PMA by tuning the oxygen pressure (PO2) and CFAO thickness (tCFAO), large perpendicular anisotropy field of ~8.0 kOe can be achieved at PO2 = 12% for the sample of tCFAO = 2.1 nm or at PO2 = 7% for tCFAO = 2.8 nm. The loss of PMA at thick tCFAO or high PO2 results mainly from the formation of large amount of CoFe oxides, which are superparamagnetic at room temperature but become hard magnetic at low temperatures. The magnetic CFAO films, with strong PMA in a relatively wide thickness range and small intrinsic damping parameter below 0.028, would find great applications in developing advanced spintronic devices.

  16. Interfacial tuning of perpendicular magnetic anisotropy and spin magnetic moment in CoFe/Pd multilayers

    Energy Technology Data Exchange (ETDEWEB)

    Ngo, D.-T., E-mail: ndthe82@gmail.com [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Meng, Z.L. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Tahmasebi, T. [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Data Storage Institute, A-STAR (Agency for Science Technology and Research), 5 Engineering Drive 1, Singapore 117608 (Singapore); Yu, X. [Singapore Synchrotron Light Source, National University of Singapore, 5 Research Link, Singapore 117603 (Singapore); Thoeng, E. [Singapore Synchrotron Light Source, National University of Singapore, 5 Research Link, Singapore 117603 (Singapore); Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Yeo, L.H. [Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Rusydi, A., E-mail: phyandri@nus.edu.sg [Singapore Synchrotron Light Source, National University of Singapore, 5 Research Link, Singapore 117603 (Singapore); Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Han, G.C [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore); Teo, K.-L., E-mail: eleteokl@nus.edu.sg [Department of Electrical and Computer Engineering, National University of Singapore, 4 Engineering Drive 3, Singapore 117576 (Singapore)

    2014-01-15

    We report on a strong perpendicular magnetic anisotropy in [CoFe 0.4 nm/Pd t]{sub 6} (t=1.0–2.0 nm) multilayers fabricated by DC sputtering in an ultrahigh vacuum chamber. Saturation magnetization, M{sub s}, and uniaxial anisotropy, K{sub u}, of the multilayers decrease with increasing the spacing thickness; with a M{sub s} of 155 emu/cc and a K{sub u} of 1.14×10{sup 5} J/m{sup 3} at a spacing thickness of t=2 nm. X-ray absorption spectroscopy and X-ray magnetic circular dichroism measurements reveal that spin and orbital magnetic moments of Co and Fe in CoFe film decrease as a function of Pd thickness, indicating the major contribution of surface/interfacial magnetism to the magnetic properties of the film. - Highlights: • Strong perpendicular magnetic anisotropy essentially contributed by interfacial anisotropy. • Controllably magnetic properties with low M{sub s}, high K{sub u}, high P. • Interfacial magnetic moments modified by CoFe/Pd interfaces with strong spin–orbit coupling. • Narrow Bloch walls with Néel caps. • Superior magnetic characteristics for spin-torque applications.

  17. On the origin of perpendicular magnetic anisotropy in strained Fe-Co(-X) films

    Science.gov (United States)

    Reichel, L.; Edström, A.; Pohl, D.; Rusz, J.; Eriksson, O.; Schultz, L.; Fähler, S.

    2017-02-01

    Very high magnetic anisotropies have been theoretically predicted for strained Fe-Co(-X) and indeed several experiments on epitaxial thin films seemed to confirm strain induced anisotropy enhancement. This study presents a critical analysis of the different contributions to perpendicular anisotropy: volume, interface and surface anisotropies. Tracing these contributions, thickness series of single layer films as well as multilayers with Au-Cu buffers/interlayers of different lattice parameters have been prepared. The analysis of their magnetic anisotropy reveals a negligible influence of the lattice parameter of the buffer. Electronic effects, originating from both, the Au-Cu interface and the film surface, outrange the elastic effects. Surface anisotropy, however, exceeds the interface anisotropy by more than a factor of three. A comparison with results from density functional theory suggests, that the experimentally observed strong perpendicular surface anisotropy originates from a deviation from an ideal oxide-free surface. Accordingly, tailored Fe-Co-X/oxide interfaces may open a route towards high anisotropy in rare-earth free materials.

  18. Estrous sheep serum enables in vitro capacitation of ram spermatozoa while preventing caspase activation.

    Science.gov (United States)

    Del Olmo, E; García-Álvarez, O; Maroto-Morales, A; Ramón, M; Jiménez-Rabadán, P; Iniesta-Cuerda, M; Anel-Lopez, L; Martinez-Pastor, F; Soler, A J; Garde, J J; Fernández-Santos, M R

    2016-01-15

    Estrous sheep serum (ESS) is considered the most efficient agent for in vitro capacitation of ram spermatozoa. We have explored the relationship between caspase activation and capacitation in ram. Semen samples from 17 rams were cryopreserved. In vivo fertility was evaluated after intrauterine artificial insemination. Samples were submitted to four treatments: control, ESS (10%), caspase inhibitor (Z-VAD-FMK), and estrous ewe serum plus caspase inhibitor (I + E). Sperm samples were incubated for 30 minutes at 38.5 °C and 5% CO2 and analyzed with flow cytometry for mitochondrial membrane potential (MitoTracker deep red), sperm viability and apoptosis-like changes (YO-PRO-1/propidium iodide), acrosomal status (peanut agglutinin-fluorescein isothiocyanate), membrane fluidity (merocyanine 540), and caspase activity (Vybrant FAM kits for polycaspases, caspase-8, and caspases 3-7). Estrous sheep serum induced changes compatible with capacitation, doubling the proportion of viable spermatozoa with increased merocyanine 540 and increasing YO-PRO-1(+) and acrosome-reacted spermatozoa (P ram spermatozoa by using ESS suggests a downregulation in apoptotic pathways. However, males with the lowest fertility showed parameters similar to high-fertility males, suggesting that other factors were involved apart from capacitation and/or caspase activation.

  19. Comparison of capacitive behavior of activated carbons with different pore structures in aqueous and nonaqueous systems

    Institute of Scientific and Technical Information of China (English)

    ZHOU Shao-yun; LI Xin-hai; WANG Zhi-xing; GUO Hua-jun; PENG Wen-jie

    2008-01-01

    The pore structures of two activated carbons from sawdust with KOH activation and coconut-shell with steam activation for supercapacitor were analyzed by N2 adsorption method. The electrochemical properties of both activated carbons in 6mol/L KOH solution and 1mol/L Et4NPF4/PC were compared, and the effect of pore structure on the capacitance was investigated by cyclic voltammetry, AC impedance and charge-discharge measurements. The results indicate that the capacitance mainly depends on effective surface area, but the power property mainly depends on mesoporosity. At low specific current (1A/g), the maximum specific capacitances of 276.3F/g in aqueous system and 123.9F/g in nonaqueous system can be obtained from sawdust activated carbon with a larger surface area of 1808m2/g, but at a high specific current, the specific capacitance of coconut-shell activated carbon with a higher mesoporosity of 75.1% is more excellent. Activated carbon by KOH activation is fitter for aqueous system and that by steam activation is fitter for nonaqueous system.

  20. A novel deflection shape function for rectangular capacitive micromachined ultrasonic transducer diaphragms

    Directory of Open Access Journals (Sweden)

    Zhou Zheng

    2015-09-01

    Full Text Available A highly accurate analytical deflection shape function that describes the deflection profiles of capacitive micromachined ultrasonic transducers (CMUTs with rectangular membranes under electrostatic pressure has been formulated. The rectangular diaphragms have a thickness range of 0.6–1.5 μm and a side length range of 100–1000 μm. The new deflection shape function generates deflection profiles that are in excellent agreement with finite element analysis (FEA results for a wide range of geometry dimensions and loading conditions. The deflection shape function is used to analyze membrane deformations and to calculate the capacitances between the deformed membranes and the fixed back plates. In 50 groups of random tests, compared with FEA results, the calculated capacitance values have a maximum deviation of 1.486% for rectangular membranes. The new analytical deflection function can provide designers with a simple way of gaining insight into the effects of designed parameters for CMUTs and other MEMS-based capacitive type sensors.