WorldWideScience

Sample records for high brightness direct

  1. High brightness direct diode laser with kW output power

    Science.gov (United States)

    Fritsche, Haro; Kruschke, Bastian; Koch, Ralf; Ferrario, Fabio; Kern, Holger; Pahl, Ulrich; Pflueger, Silke; Gries, Wolfgang

    2014-03-01

    High power, high brightness diode lasers are beginning to challenge solid state lasers, i.e. disk and fiber lasers. The core technologies for brightness scaling of diode lasers are optical stacking and dense spectral combining (DSC), as well as improvements of the diode material. Diode lasers will have the lowest cost of ownership, highest efficiency and most compact design among all lasers. In our modular product design tens of single emitters are combined in a compact package and launched into a 200 μm fiber with 0.08 NA. Dense spectral combining enables power scaling from 80 W to kilowatts. Volume Bragg Gratings and dichroic filters yield high optical efficiencies of more than 80% at low cost. Each module emits up to 500 W with a beam quality of 5.5 mm*mrad and less than 20 nm linewidth. High speed switching power supplies are integrated into the module and rise times as short as 6 μs have been demonstrated. Fast control algorithms based on FPGA and embedded microcontroller ensure high wall plug efficiency with a unique control loop time of only 30 μs. Individual modules are spectrally combined to result in direct diode laser systems with kilowatts of output power at identical beam quality. For low loss fiber coupling a 200 μm fiber is used and the NA is limited to 0.08 corresponding to a beam quality of 7.5 mm*mrad. The controller architecture is fully scalable without sacrificing loop time. We leverage automated manufacturing for cost effective, high yield production. A precision robotic system handles and aligns the individual fast axis lenses and tracks all quality relevant data. Similar technologies are also deployed for dense spectral combining aligning the VBG and dichroic filters. Operating at wavelengths between 900 nm and 1100 nm, these systems are mainly used in cutting and welding, but the technology can also be adapted to other wavelength ranges, such as 793 nm and 1530 nm. Around 1.5 μm the diodes are already successfully used for resonant

  2. High Brightness OLED Lighting

    Energy Technology Data Exchange (ETDEWEB)

    Spindler, Jeffrey [OLEDWorks LLC; Kondakova, Marina [OLEDWorks LLC; Boroson, Michael [OLEDWorks LLC; Hamer, John [OLEDWorks LLC

    2016-05-25

    In this work we describe the technology developments behind our current and future generations of high brightness OLED lighting panels. We have developed white and amber OLEDs with excellent performance based on the stacking approach. Current products achieve 40-60 lm/W, while future developments focus on achieving 80 lm/W or higher.

  3. High brightness semiconductor lasers with reduced filamentation

    DEFF Research Database (Denmark)

    McInerney, John; O'Brien, Peter.; Skovgaard, Peter M. W.;

    1999-01-01

    High brightness semiconductor lasers have applications in spectroscopy, fiber lasers, manufacturing and materials processing, medicine and free space communication or energy transfer. The main difficulty associated with high brightness is that, because of COD, high power requires a large aperture...

  4. High-brightness rf linear accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, R.A.

    1986-01-01

    The issue of high brightness and its ramifications in linacs driven by radio-frequency fields is discussed. A history of the RF linacs is reviewed briefly. Some current applications are then examined that are driving progress in RF linacs. The physics affecting the brightness of RF linacs is then discussed, followed by the economic feasibility of higher brightness machines. (LEW)

  5. High-brightness rf linear accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, R.A.

    1986-01-01

    The issue of high brightness and its ramifications in linacs driven by radio-frequency fields is discussed. A history of the RF linacs is reviewed briefly. Some current applications are then examined that are driving progress in RF linacs. The physics affecting the brightness of RF linacs is then discussed, followed by the economic feasibility of higher brightness machines. (LEW)

  6. Wavelength Stabilized High Brightness Direct Diode Pumps for Solid State LIDAR Systems at Eye-Safe Wavelengths Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Proposed is a high power, high efficiency, high reliability compact eye-safe LIDAR source. The diode pump source is an electrically series-connected array of single...

  7. Wavelength Stabilized High Brightness Direct Diode Pumps for Solid State LIDAR Systems at Eye-Safe Wavelengths Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Our proposed innovation is to design and fabricate a diode pumped Er:YAG micro-chip laser capable of varied repetition rates and high pulse energies using the single...

  8. Observations and diagnostics in high brightness beams

    Energy Technology Data Exchange (ETDEWEB)

    Cianchi, A., E-mail: alessandro.cianchi@roma2.infn.it [University of Rome Tor Vergata and INFN-Roma Tor Vergata, Via della Ricerca Scientifica 1, 00133 Rome (Italy); Anania, M.P.; Bisesto, F.; Castellano, M.; Chiadroni, E.; Pompili, R.; Shpakov, V. [INFN-LNF, Via Enrico Fermi 40, 00044 Frascati (Italy)

    2016-09-01

    The brightness is a figure of merit largely used in the light sources, like FEL (Free Electron Lasers), but it is also fundamental in several other applications, as for instance Compton backscattering sources, beam driven plasma accelerators and THz sources. Advanced diagnostics are essential tools in the development of high brightness beams. 6D electron beam diagnostics will be reviewed with emphasis on emittance measurement.

  9. The Los Alamos high-brightness photoinjector

    Energy Technology Data Exchange (ETDEWEB)

    O' Shea, P.G.

    1991-01-01

    For a number of years Los Alamos National Laboratory has been developing photocathode RF guns for high-brightness electron beam applications such as free-electron lasers (FELs). Previously thermionic high-voltage guns have been the source of choice for the electron accelerators used to drive FELs. The performance of such FELs is severely limited by the emittance growth produced by the subharmonic bunching process and also by the low peak current of the source. In a photoinjector, a laser driven photocathode is placed directly in a high-gradient RF accelerating cavity. A photocathode allows unsurpassed control over the current, and the spatial and temporal profile of the beam. In addition the electrodeless emission'' avoids many of the difficulties associated with multi-electrode guns, i.e. the electrons are accelerated very rapidly to relativistic energies, and there are no electrodes to distort the accelerating fields. For the past two years we have been integrating a photocathode into our existing FEL facility by replacing our thermionic gun and subharmonic bunchers with a high-gradient 1.3 GHz photoinjector. The photoinjector, which is approximately 0.6 m in length, produces 6 MeV, 300 A, 15 ps linac, and accelerated to a final energy of 40 MeV. We have recently begun lasing at wavelengths near 3 {mu}m. 16 refs., 2 figs., 5 tabs.

  10. Emittance measurement of high-brightness microbeams

    Energy Technology Data Exchange (ETDEWEB)

    Ishizuka, Hiroshi; Nakahara, Yuriko (Fukuoka Inst. of Tech. (Japan)); Kawasaki, Sunao; Musyoki, S.; Shimizu, Hiroshi; Watanabe, Akihiko; Shiho, Makoto

    1994-09-01

    Arrays of microtriodes have recently become available due to the development of microfabricated field-emission electron sources. Computer simulation has shown that the brightness of beams emitted by them is significantly higher than that of the common microbeams, and possible application of the accelerated beam to free electron lasers has been discussed. Experimentation on beam generation has started, but methods for diagnosing the beam have not yet been established. Difficulty is predicted, because of the high brightness, in applying the conventional methods of emittance measurement. In this paper we propose a new method that determines the emittance without using apertures. The cross section of a converging beam is elongated by a quadrupole lens, and parameters of the emittance ellipse are obtained from the beam size on a screen when changing either the strength or the axial position of the quadrupole lens. (author).

  11. Wave and Wind Direction Effects on SFMR Brightness Temperatures

    Science.gov (United States)

    Holbach, Heather; Uhlhorn, Eric; Bourassa, Mark

    2015-04-01

    Surface winds in a tropical cyclone are essential for determining its strength. Currently the Stepped-Frequency Microwave Radiometer (SFMR) and Global Positioning System (GPS) dropwindsondes are the main instruments used for obtaining in situ surface wind measurements. The platforms for these instruments are the National Oceanographic and Atmospheric Administration (NOAA) P-3 and Air Force C-130J hurricane hunter aircraft. The SFMR measures sea surface microwave brightness temperatures at six frequencies ranging from 4.7 to 7.2 GHz. Surface wind speed estimates are obtained from these brightness temperatures by using a retrieval algorithm that employs a geophysical model function relating surface emissivity and wind speed. The SFMR is designed to obtain a single nadir track of surface wind speeds directly beneath the aircraft during level flight and not when turning because of the complexity of the wave field and foam distribution when the SFMR views the surface off-nadir or during aircraft rolls. However, the effects of the wave field on the measurements can be investigated using measurements obtained during the 2008 and 2014 Atlantic hurricane seasons. An SFMR module was flown in precipitation-free regions of the tropical cyclones to collect data at specified roll angles of 15°, 30°, 45°, and 60° in some cases. Excess brightness temperatures are then calculated with respect to zero wind speed values and independent of wind direction. An asymmetry is found in the resulting excess brightness temperatures. It is hypothesized that this asymmetry is caused by the direction of wave propagation and the angle at which the wave field is viewed by the SFMR. Wind direction may also play a role in the asymmetry. To analyze the asymmetry further measurement from WindSat will be used. Once the relationship is determined between surface wind speed, brightness temperature, and incidence angle a technique will be developed to obtain a surface wind speed when the aircraft is

  12. Recent brightness improvements of 976 nm high power laser bars

    Science.gov (United States)

    Bachmann, Alexander; Lauer, Christian; Furitsch, Michael; König, Harald; Müller, Martin; Strauß, Uwe

    2017-02-01

    Pump modules for fiber lasers and fiber-coupled direct diode laser systems require laser diodes with a high beam quality. While in fast axis direction diode lasers exhibit a nearly diffraction limited output beam, the maximum usable output power is usually limited by the slow axis divergence blooming at high power levels. Measures to improve the lateral beam quality are subject of extensive research. Among the many influencing factors are the chip temperature, thermal crosstalk between emitters, thermal lensing, lateral waveguiding and lateral mode structure. We present results on the improvements of the lateral beam divergence and brightness of gain-guided mini-bars for emission at 976 nm. For efficient fiber coupling into a 200 μm fiber with NA 0.22, the upper limit of the lateral beam parameter product is 15.5 mm mrad. Within the last years, the power level at this beam quality has been improved from 44 W to 52 W for the chips in production, enabling more cost efficient pump modules and laser systems. Our work towards further improvements of the beam quality focuses on advanced chip designs featuring reduced thermal lensing and mode shaping. Recent R&D results will be presented, showing a further improvement of the beam quality by 15%. Also, results of a chip design with an improved lateral emitter design for highest brightness levels will be shown, yielding in a record high brightness saturation of 4.8 W/mm mrad.

  13. High Brightness Neutron Source for Radiography

    Energy Technology Data Exchange (ETDEWEB)

    Cremer, J. T.; Piestrup, Melvin, A.; Gary, Charles, K.; Harris, Jack, L. Williams, David, J.; Jones, Glenn, E.; Vainionpaa, J. , H.; Fuller, Michael, J.; Rothbart, George, H.; Kwan, J., W.; Ludewigt, B., A.; Gough, R.., A..; Reijonen, Jani; Leung, Ka-Ngo

    2008-12-08

    This research and development program was designed to improve nondestructive evaluation of large mechanical objects by providing both fast and thermal neutron sources for radiography. Neutron radiography permits inspection inside objects that x-rays cannot penetrate and permits imaging of corrosion and cracks in low-density materials. Discovering of fatigue cracks and corrosion in piping without the necessity of insulation removal is possible. Neutron radiography sources can provide for the nondestructive testing interests of commercial and military aircraft, public utilities and petrochemical organizations. Three neutron prototype neutron generators were designed and fabricated based on original research done at the Lawrence Berkeley National Laboratory (LBNL). The research and development of these generators was successfully continued by LBNL and Adelphi Technology Inc. under this STTR. The original design goals of high neutron yield and generator robustness have been achieved, using new technology developed under this grant. In one prototype generator, the fast neutron yield and brightness was roughly 10 times larger than previously marketed neutron generators using the same deuterium-deuterium reaction. In another generator, we integrate a moderator with a fast neutron source, resulting in a high brightness thermal neutron generator. The moderator acts as both conventional moderator and mechanical and electrical support structure for the generator and effectively mimics a nuclear reactor. In addition to the new prototype generators, an entirely new plasma ion source for neutron production was developed. First developed by LBNL, this source uses a spiral antenna to more efficiently couple the RF radiation into the plasma, reducing the required gas pressure so that the generator head can be completely sealed, permitting the possible use of tritium gas. This also permits the generator to use the deuterium-tritium reaction to produce 14-MeV neutrons with increases

  14. Extremely High Current, High-Brightness Energy Recovery Linac

    CERN Document Server

    Ben-Zvi, Ilan; Beavis, Dana; Blaskiewicz, Michael; Bluem, Hans; Brennan, Joseph M; Burger, Al; Burrill, Andrew; Calaga, Rama; Cameron, Peter; Chang, Xiangyun; Cole, Michael; Connolly, Roger; Delayen, Jean R; Favale, Anthony; Gassner, David M; Grimes, Jacob T; Hahn, Harald; Hershcovitch, Ady; Holmes, Douglas; Hseuh Hsiao Chaun; Johnson, Peter; Kayran, Dmitry; Kewisch, Jorg; Kneisel, Peter; Lambiase, Robert; Litvinenko, Vladimir N; McIntyre, Gary; Meng, Wuzheng; Nehring, Thomas; Nicoletti, Tony; Oerter, Brian; Pate, David; Phillips, Larry; Preble, Joseph P; Rank, Jim; Rao, Triveni; Rathke, John; Roser, Thomas; Russo, Thomas; Scaduto, Joseph; Schultheiss, Tom; Segalov, Zvi; Smith, Kevin T; Todd, Alan M M; Warren-Funk, L; Williams, Neville; Wu, Kuo-Chen; Yakimenko, Vitaly; Yip, Kin; Zaltsman, Alex; Zhao, Yongxiang

    2005-01-01

    Next generation ERL light-sources, high-energy electron coolers, high-power Free-Electron Lasers, powerful Compton X-ray sources and many other accelerators were made possible by the emerging technology of high-power, high-brightness electron beams. In order to get the anticipated performance level of ampere-class currents, many technological barriers are yet to be broken. BNL's Collider-Accelerator Department is pursuing some of these technologies for its electron cooling of RHIC application, as well as a possible future electron-hadron collider. We will describe work on CW, high-current and high-brightness electron beams. This will include a description of a superconducting, laser-photocathode RF gun and an accelerator cavity capable of producing low emittance (about 1 micron rms normalized) one nano-Coulomb bunches at currents of the order of one ampere average.

  15. ECR Ion Source for a High-Brightness Cyclotron

    Science.gov (United States)

    Comeaux, Justin; McIntyre, Peter; Assadi, Saeed

    2011-10-01

    New technology is being developed for high-brightness, high-current cyclotrons with performance benefits for accelerator-driven subcritical fission power, medical isotope production, and proton beam cancer therapy. This paper describes the design for a 65 kV electron cyclotron resonance (ECR) ion source that will provide high-brightness beam for injection into the cyclotron. The ion source is modeled closely upon the one that is used at the Paul Scherrer Institute. Modifications are being made to provide enhanced brightness and compatibility for higher-current operation.

  16. Ultra-high resolution and high-brightness AMOLED

    Science.gov (United States)

    Wacyk, Ihor; Ghosh, Amal; Prache, Olivier; Draper, Russ; Fellowes, Dave

    2012-06-01

    As part of its continuing effort to improve both the resolution and optical performance of AMOLED microdisplays, eMagin has recently developed an SXGA (1280×3×1024) microdisplay under a US Army RDECOM CERDEC NVESD contract that combines the world's smallest OLED pixel pitch with an ultra-high brightness green OLED emitter. This development is aimed at next-generation HMD systems with "see-through" and daylight imaging requirements. The OLED pixel array is built on a 0.18-micron CMOS backplane and contains over 4 million individually addressable pixels with a pixel pitch of 2.7 × 8.1 microns, resulting in an active area of 0.52 inches diagonal. Using both spatial and temporal enhancement, the display can provide over 10-bits of gray-level control for high dynamic range applications. The new pixel design also enables the future implementation of a full-color QSXGA (2560 × RGB × 2048) microdisplay in an active area of only 1.05 inch diagonal. A low-power serialized low-voltage-differential-signaling (LVDS) interface is integrated into the display for use as a remote video link for tethered systems. The new SXGA backplane has been combined with the high-brightness green OLED device developed by eMagin under an NVESD contract. This OLED device has produced an output brightness of more than 8000fL with all pixels on; lifetime measurements are currently underway and will presented at the meeting. This paper will describe the operational features and first optical and electrical test results of the new SXGA demonstrator microdisplay.

  17. Laser ion source for high brightness heavy ion beam

    Science.gov (United States)

    Okamura, M.

    2016-09-01

    A laser ion source is known as a high current high charge state heavy ion source. However we place great emphasis on the capability to realize a high brightness ion source. A laser ion source has a pinpoint small volume where materials are ionized and can achieve quite uniform low temperature ion beam. Those features may enable us to realize very small emittance beams. In 2014, a low charge state high brightness laser ion source was successfully commissioned in Brookhaven National Laboratory. Now most of all the solid based heavy ions are being provided from the laser ion source for regular operation.

  18. Development of components for the high brightness laser

    Science.gov (United States)

    Garmire, E.

    1980-10-01

    In 1979 DBR lasers were fabricated and their properties studied. Further investigations were undertaken of the beam expander, to determine its potential for the high brightness laser. From this data it was determined that a design change for the high brightness laser is required. This design change is described. In addition, measurements were made on laser amplification to compare this method of achieving higher power compared to the coupled diode arrays. Finally, as a spin-off of this research, a new design for a single mode laser was discovered, using the active/passive laser, a configuration which was fabricated as a first step toward fabrication of DBR lasers. Each of these research efforts are described in this report. Monolithic integration of the necessary components on one substrate for the high brightness laser has been hindered by problems in material and fabrication uniformity. This will be described, and projections for future development will be outlined.

  19. Direct imaging of phase objects enables conventional deconvolution in bright field light microscopy.

    Directory of Open Access Journals (Sweden)

    Carmen Noemí Hernández Candia

    Full Text Available In transmitted optical microscopy, absorption structure and phase structure of the specimen determine the three-dimensional intensity distribution of the image. The elementary impulse responses of the bright field microscope therefore consist of separate absorptive and phase components, precluding general application of linear, conventional deconvolution processing methods to improve image contrast and resolution. However, conventional deconvolution can be applied in the case of pure phase (or pure absorptive objects if the corresponding phase (or absorptive impulse responses of the microscope are known. In this work, we present direct measurements of the phase point- and line-spread functions of a high-aperture microscope operating in transmitted bright field. Polystyrene nanoparticles and microtubules (biological polymer filaments serve as the pure phase point and line objects, respectively, that are imaged with high contrast and low noise using standard microscopy plus digital image processing. Our experimental results agree with a proposed model for the response functions, and confirm previous theoretical predictions. Finally, we use the measured phase point-spread function to apply conventional deconvolution on the bright field images of living, unstained bacteria, resulting in improved definition of cell boundaries and sub-cellular features. These developments demonstrate practical application of standard restoration methods to improve imaging of phase objects such as cells in transmitted light microscopy.

  20. High-brightness ultra-cold metastable neon-beam

    CERN Document Server

    Shimizu, Fujio

    2015-01-01

    This paper presents detailed characteristics of an ultra-cold bright metastable neon atomic beam which we have been using for atom-interferometric applications. The basis of the device is an atomic beam released from a magneto-optical trap (MOT) which is operated with a high intensity trapping laser, high magnetic quadrupole field, and large laser detuining. Mainly due to the complex structure of three dimensional magnetic field and laser beams, a bright small spot of atoms is formed near the center of the quadrupole magnetic field under an appropriate operating condition. We obtained the minimum trap diameter of 50 micron meter, the atomic density nearly 10^{13}cm^{-3}, and the atomic temperature slightly less than the Doppler limited temperature of 200 micro-K. By releasing trapped atoms we obtained an bright cold atomic beam which is not far from the collision limited atomic density.

  1. High Brightness, High Average Current Injector Development at Cornell

    CERN Document Server

    Sinclair, C K

    2005-01-01

    Cornell University is constructing a 100 mA average current, high brightness electron injector for a planned Energy Recovery Linac (ERL) hard X-ray synchrotron radiation source. This injector will employ a very high voltage DC gun with a negative electron affinity photoemission cathode. Relatively long duration electron pulses from the photocathode will be drift bunched, and accelerated to 5-15 MeV with five two-cell, 1300 MHz superconducting cavities. The total beam power will be limited to 575 kW by the DC and RF power sources. A genetic algorithm based computational optimization of this injector has resulted in simulated rms normalized emittances of 0.1 mm-mrad at 80 pC/bunch, and 0.7 mm-mrad at 1 nC/bunch. The many technical issues and their design solutions will be discussed. Construction of the gun and the SRF cavities is well underway. The schedule for completion, and the planned measurements, will be presented.

  2. Controlling excitons. Concepts for phosphorescent organic LEDs at high brightness

    Energy Technology Data Exchange (ETDEWEB)

    Reineke, Sebastian

    2009-11-15

    This work focusses on the high brightness performance of phosphorescent organic light-emitting diodes (OLEDs). The use of phosphorescent emitter molecules in OLEDs is essential to realize internal electron-photon conversion efficiencies of 100 %. However, due to their molecular nature, the excited triplet states have orders of magnitude longer time constants compared to their fluorescent counterparts which, in turn, strongly increases the probability of bimolecular annihilation. As a consequence, the efficiencies of phosphorescent OLEDs decline at high brightness - an effect known as efficiency roll-off, for which it has been shown to be dominated by triplet-triplet annihilation (TTA). In this work, TTA of the archetype phosphorescent emitter Ir(ppy){sub 3} is investigated in time-resolved photoluminescence experiments. For the widely used mixed system CBP:Ir(ppy){sub 3}, host-guest TTA - an additional unwanted TTA channel - is experimentally observed at high excitation levels. By using matrix materials with higher triplet energies, this effect is efficiently suppressed, however further studies show that the efficiency roll-off of Ir(ppy)3 is much more pronounced than predicted by a model based on Foerster-type energy transfer, which marks the intrinsic limit for TTA. These results suggest that the emitter molecules show a strong tendency to form aggregates in the mixed film as the origin for enhanced TTA. Transmission electron microscopy images of Ir(ppy){sub 3} doped mixed films give direct proof of emitter aggregates. Based on these results, two concepts are developed that improve the high brightness performance of OLEDs. In a first approach, thin intrinsic matrix interlayers are incorporated in the emission layer leading to a one-dimensional exciton confinement that suppresses exciton migration and, consequently, TTA. The second concept reduces the efficiency roll-off by using an emitter molecule with slightly different chemical structure, i.e. Ir(ppy){sub 2

  3. High-brightness switchable multiwavelength remote laser in air

    Energy Technology Data Exchange (ETDEWEB)

    Yao Jinping; Cheng Ya; Xu Zhizhan [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Zeng Bin; Li Guihua; Chu Wei; Ni Jielei; Zhang Haisu [State Key Laboratory of High Field Laser Physics, Shanghai Institute of Optics and Fine Mechanics, Chinese Academy of Sciences, Shanghai 201800 (China); Graduate School of Chinese Academy of Sciences, Beijing 100080 (China); Xu Huailiang [State Key Laboratory on Integrated Optoelectronics, College of Electronic Science and Engineering, Jilin University, Changchun 130012 (China); Chin, See Leang [Center for Optics, Universite Laval, Quebec City, Quebec G1V 0A6 (Canada)

    2011-11-15

    We demonstrate a harmonic-seeded switchable multiwavelength laser in air driven by intense midinfrared femtosecond laser pulses, in which population inversion occurs at an ultrafast time scale (i.e., less than {approx}200 fs) owing to direct formation of excited molecular nitrogen ions by strong-field ionization of inner-valence electrons. The bright multiwavelength laser in air opens the perspective for remote detection of multiple pollutants based on nonlinear optical spectroscopy.

  4. VELOCITY BUNCHING OF HIGH-BRIGHTNESS ELECTRON BEAMS

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S G; Musumeci, P; Rosenzweig, J B; Brown, W J; England, R J; Ferrario, M; Jacob, J S; Thompson, M C; Travish, G; Tremaine, A M; Yoder, R

    2004-10-15

    Velocity bunching has been recently proposed as a tool for compressing electron beam pulses in modern high brightness photoinjector sources. This tool is familiar from earlier schemes implemented for bunching dc electron sources, but presents peculiar challenges when applied to high current, low emittance beams from photoinjectors. The main difficulty foreseen is control of emittance oscillations in the beam in this scheme, which can be naturally considered as an extension of the emittance compensation process at moderate energies. This paper presents two scenarios in which velocity bunching, combined with emittance control, is to play a role in nascent projects. The first is termed ballistic bunching, where the changing of relative particle velocities and positions occur in distinct regions, a short high gradient linac, and a drift length. This scenario is discussed in the context of the proposed ORION photoinjector. Simulations are used to explore the relationship between the degree of bunching, and the emittance compensation process. Experimental measurements performed at the UCLA Neptune Laboratory of the surprisingly robust bunching process, as well as accompanying deleterious transverse effects, are presented. An unanticipated mechanism for emittance growth in bends for highly momentum chirped beam was identified and studied in these experiments. The second scenario may be designated as phase space rotation, and corresponds closely to the recent proposal of Ferrario and Serafini. Its implementation for the compression of the electron beam pulse length in the PLEIADES inverse Compton scattering (ICS) experiment at LLNL is discussed. It is shown in simulations that optimum compression may be obtained by manipulation of the phases in low gradient traveling wave accelerator sections. Measurements of the bunching and emittance control achieved in such an implementation at PLEIADES, as well as aspects of the use of velocity-bunched beam directly in ICS experiments

  5. Velocity bunching of high-brightness electron beams

    Directory of Open Access Journals (Sweden)

    S. G. Anderson

    2005-01-01

    Full Text Available Velocity bunching has been recently proposed as a tool for compressing electron beam pulses in modern high brightness photoinjector sources. This tool is familiar from earlier schemes implemented for bunching dc electron sources, but presents peculiar challenges when applied to high current, low emittance beams from photoinjectors. The main difficulty foreseen is control of emittance oscillations in the beam in this scheme, which can be naturally considered as an extension of the emittance compensation process at moderate energies. This paper presents two scenarios in which velocity bunching, combined with emittance control, is to play a role in nascent projects. The first is termed ballistic bunching, where the changing of relative particle velocities and positions occur in distinct regions, a short high gradient linac, and a drift length. This scenario is discussed in the context of the proposed ORION photoinjector. Simulations are used to explore the relationship between the degree of bunching, and the emittance compensation process. Experimental measurements performed at the UCLA Neptune Laboratory of the surprisingly robust bunching process, as well as accompanying deleterious transverse effects, are presented. An unanticipated mechanism for emittance growth in bends for highly momentum chirped beam was identified and studied in these experiments. The second scenario may be designated as phase space rotation, and corresponds closely to the recent proposal of Ferrario and Serafini. Its implementation for the compression of the electron beam pulse length in the PLEIADES inverse Compton scattering (ICS experiment at LLNL is discussed. It is shown in simulations that optimum compression may be obtained by manipulation of the phases in low gradient traveling wave accelerator sections. Measurements of the bunching and emittance control achieved in such an implementation at PLEIADES, as well as aspects of the use of velocity-bunched beam directly

  6. Beam shaping design for compact and high-brightness fiber-coupled laser-diode system.

    Science.gov (United States)

    Yu, Junhong; Guo, Linui; Wu, Hualing; Wang, Zhao; Tan, Hao; Gao, Songxin; Wu, Deyong; Zhang, Kai

    2015-06-20

    Fiber-coupled laser diodes have become essential sources for fiber laser pumping and direct energy applications. A compact and high-brightness fiber-coupled system has been designed based on a significant beam shaping method. The laser-diode stack consists of eight mini-bars and is effectively coupled into a standard 100 μm core diameter and NA=0.22 fiber. The simulative result indicates that the module will have an output power over 440 W. Using this technique, compactness and high-brightness production of a fiber-coupled laser-diode module is possible.

  7. The Physics and Applications of High Brightness Electron Beams

    Science.gov (United States)

    Palumbo, Luigi; Rosenzweig, J.; Serafini, Luca

    2007-09-01

    Plenary sessions. RF deflector based sub-Ps beam diagnostics: application to FEL and advanced accelerators / D. Alesini. Production of fermtosecond pulses and micron beam spots for high brightness electron beam applications / S.G. Anderson ... [et al.]. Wakefields of sub-picosecond electron bunches / K.L.F. Bane. Diamond secondary emitter / I. Ben-Zvi ... [et al.]. Parametric optimization for an X-ray free electron laser with a laser wiggler / R. Bonifacio, N. Piovella and M.M. Cola. Needle cathodes for high-brightness beams / C.H. Boulware ... [et al.]. Non linear evolution of short pulses in FEL cascaded undulators and the FEL harmonic cascade / L. Giannessi and P. Musumeci. High brightness laser induced multi-meV electron/proton sources / D. Giulietti ... [et al.]. Emittance limitation of a conditioned beam in a strong focusing FEL undulator / Z. Huang, G. Stupakov and S. Reiche. Scaled models: space-charge dominated electron storage rings / R.A. Kishek ... [et al.]. High brightness beam applications: energy recovered linacs / G.A. Krafft. Maximizing brightness in photoinjectors / C. Limborg-Deprey and H. Tomizawa. Ultracold electron sources / O.J. Luiten ... [et al.]. Scaling laws of structure-based optical accelerators / A. Mizrahi, V. Karagodsky and L. Schächter. High brightness beams-applications to free-electron lasers / S. Reiche. Conception of photo-injectors for the CTF3 experiment / R. Roux. Superconducting RF photoinjectors: an overview / J. Sekutowicz. Status and perspectives of photo injector developments for high brightness beams / F. Stephan. Results from the UCLA/FNLP underdense plasma lens experiment / M.C. Thompson ... [et al.]. Medical application of multi-beam compton scattering monochromatic tunable hard X-ray source / M. Uesaka ... [et al.]. Design of a 2 kA, 30 fs RF-photoinjector for waterbag compression / S.B. Van Der Geer, O.J. Luiten and M.J. De Loos. Proposal for a high-brightness pulsed electron source / M. Zolotorev ... [et al

  8. Compact high brightness diode laser emitting 500W from a 100μm fiber

    Science.gov (United States)

    Heinemann, Stefan; Fritsche, Haro; Kruschke, Bastian; Schmidt, Torsten; Gries, Wolfgang

    2013-02-01

    High power, high brightness diode lasers are beginning to compete with solid state lasers, i.e. disk and fiber lasers. The core technologies for brightness scaling of diode lasers are optical stacking and dense spectral combining (DSC), as well as improvements of the diode material. Diode lasers have the lowest cost of ownership, highest efficiency and most compact design among all lasers. Multiple Single Emitter (MSE) modules allow highest power and highest brightness diode lasers based on standard broad area diodes. Multiple single emitters, each rated at 12 W, are stacked in the fast axis with a monolithic slow axis collimator (SAC) array. Volume Bragg Gratings (VBG) stabilizes the wavelength and narrow the linewidth to less than 1 nm. Dichroic mirrors are used for dense wavelength multiplexing of 4 channels within 12 nm. Subsequently polarization multiplexing generates 450 W with a beam quality of 4.5 mm*mrad. Fast control electronics and miniaturized switched power supplies enable pulse rise times of less than 10 μs, with pulse widths continuously adjustable from 20 μs to cw. Further power scaling up to multi-kilowatts can be achieved by multiplexing up to 16 channels. The power and brightness of these systems enables the use of direct diode lasers for cutting and welding. The technologies can be transferred to other wavelengths to include 793 nm and 1530 nm. Optimized spectral combining enables further improvements in spectral brightness and power.

  9. High-current-density, high brightness cathodes for free electron laser applications

    Energy Technology Data Exchange (ETDEWEB)

    Green, M.C. (Varian Associates, Palo Alto, CA (USA). Palo Alto Microwave Tube Div.)

    1987-06-01

    This report discusses the following topics: brightness and emittance of electron beams and cathodes; general requirements for cathodes in high brightness electron guns; candidate cathode types; plasma and field emission cathodes; true field emission cathodes; oxide cathodes; lanthanum hexaborides cathodes; laser driven thermionic cathodes; laser driven photocathodes; impregnated porous tungsten dispenser cathodes; and choice of best performing cathode types.

  10. Highly Bright White Organic Light-Emitting Diode

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ A highly bright white organic light-emitting diode (OLED) was realized by using a highly bright blue emitting layer, 1,7-diphenyl-4-biphenyl-3,5-dimethyl-l,7-dihydrodipyrazolo[3,4-b;4',3'-e]pyridine (PAP-Ph), together with a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped Alq [tris(8-hydroxyquinolinato) aluminum (Ⅲ)] layer to provide the blue, red and green emission for color mixing. With appropriate thickness control, the white-light OLED has a performance that reaches 24700 cd/m2 at 15 V, 1.93 lm/W at 6.5 V, and >300 cd/m2 at 7.7 mA/em2. The Commission Internationale de l'Eclairage (CIE) coordinates of the emitted light vary in a very small range, from (0.35, 0.34) to (0.34, 0.35), when forward voltages change from 6 to 12 V.

  11. Highly Bright White Organic Light-Emitting Diode

    Institute of Scientific and Technical Information of China (English)

    KO; C.; W.

    2001-01-01

    A highly bright white organic light-emitting diode (OLED) was realized by using a highly bright blue emitting layer, 1,7-diphenyl-4-biphenyl-3,5-dimethyl-l,7-dihydrodipyrazolo[3,4-b;4',3'-e]pyridine (PAP-Ph), together with a 4-(dicyanomethylene)-2-methyl-6-(4-dimethylaminostyryl)-4H-pyran (DCM)-doped Alq [tris(8-hydroxyquinolinato) aluminum (Ⅲ)] layer to provide the blue, red and green emission for color mixing. With appropriate thickness control, the white-light OLED has a performance that reaches 24700 cd/m2 at 15 V, 1.93 lm/W at 6.5 V, and >300 cd/m2 at 7.7 mA/em2. The Commission Internationale de l'Eclairage (CIE) coordinates of the emitted light vary in a very small range, from (0.35, 0.34) to (0.34, 0.35), when forward voltages change from 6 to 12 V.  ……

  12. Focused ion beams using a high-brightness plasma source

    Science.gov (United States)

    Guharay, Samar

    2002-10-01

    High-brightness ion beams, with low energy spread, have merits for many new applications in microelectronics, materials science, and biology. Negative ions are especially attractive for the applications that involve beam-solid interactions. When negative ions strike a surface, especially an electrically isolated surface, the surface charging voltage is limited to few volts [1]. This property can be effectively utilized to circumvent problems due to surface charging, such as device damage and beam defocusing. A compact plasma source, with the capability to deliver either positive or negative ion beams, has been developed. H- beams from this pulsed source showed brightness within an order of magnitude of the value for beams from liquid-metal ion sources. The beam angular intensity is > 40 mAsr-1 and the corresponding energy spread is 1 Acm-2 and a spot size of 100 nm. Such characteristics of focused beam parameters, using a dc source, will immediately open up a large area of new applications. [1] P. N. Guzdar, A. S. Sharma, S. K. Guharay, "Charging of substrates irradiated by particle beams" Appl. Phys. Lett. 71, 3302 (1997). [2] S. K. Guharay, E. Sokolovsky, J. Orloff, "Characteristics of ion beams from a Penning source for focused ion beam applications" J. Vac. Sci Technol. B17, 2779 (1999).

  13. Volume-scalable high-brightness three-dimensional visible light source

    Science.gov (United States)

    Subramania, Ganapathi; Fischer, Arthur J; Wang, George T; Li, Qiming

    2014-02-18

    A volume-scalable, high-brightness, electrically driven visible light source comprises a three-dimensional photonic crystal (3DPC) comprising one or more direct bandgap semiconductors. The improved light emission performance of the invention is achieved based on the enhancement of radiative emission of light emitters placed inside a 3DPC due to the strong modification of the photonic density-of-states engendered by the 3DPC.

  14. ROLE OF DIAMOND SECONDARY EMITTERS IN HIGH BRIGHTNESS ELECTRON SOURCES.

    Energy Technology Data Exchange (ETDEWEB)

    RAO, T.; BEN-ZVI, I.; BURRILL, A.; CHANG, X.; GRIMES, J.; RANK, J.; SEGALOV, Z.; SMEDLEY, J.

    2005-09-20

    In this paper we explore the possibility of using diamond secondary emitter in a high average current electron injector to amplify the current from the photocathode and to isolate the cathode and the injector from each other to increase the life time of the cathode and preserve the performance of the injector. Secondary electron yield of 225 and current density of 0.8 a/cm{sup 2} have been measured in the transmission mode from type 2 a natural diamond. Although the diamond will be heated during normal operation in the injector, calculations indicate that by cryogenically cooling the diamond, the temperature gradient along the diamond can be maintained within the acceptable range. The electron energy and temporal distributions are expected to be narrow from this device resulting in high brightness beams. Plans are underway to measure the SEY in emission mode, fabricate photocathode-diamond capsule and test diamond and capsule in superconducting RF injector.

  15. High Brightness Plasmon-Enhanced Nanostructured Gold Photoemitters

    Energy Technology Data Exchange (ETDEWEB)

    Gong, Yu; Joly, Alan G.; Kong, Lingmei; El-Khoury, Patrick Z.; Hess, Wayne P.

    2014-12-30

    Plasmonic nanohole arrays are fabricated in gold thin films by focused ion beam (FIB) lithography. Subsequent heat treatment creates sub 100 nm nanometric structures including tips, rods and flakes, all localized in the nanohole array region. The combined nanohole array and nanostructured surface comprise an efficient photoemitter. High brightness photoemission is observed from this construct using photoemission electron microscopy (PEEM), following 780 nm femtosecond (fs) laser irradiation. By comparing our observables to results of finite difference time domain (FDTD) calculations, we demonstrate that photoemission from the sub-100 nm structures is enhanced in the region of propagating surface plasmons launched from the nanohole arrays. Additionally, by tuning hole diameter and separation in the nanohole array, the photoemission intensity of nanostructured photoemitters can be controlled. We observe a photoemission enhancement of over 108, relative to photoemission from the flat region of the gold substrate at laser intensities well below the ablation threshold.

  16. The Bi-directional Moving Structures in a Coronal Bright Point

    CERN Document Server

    Li, Dong; Su, Yingna

    2016-01-01

    We report the bi-directional moving structures in a coronal bright point (CBP) on 2015 July 14. It is observed by the Atmospheric Imaging Assembly (AIA) onboard Solar Dynamics Observatory (SDO). This CBP has a lifetime of about 10 minutes, and a curved shape. The observations show that many bright structures are moving intermittently outward from the CBP brightness core. Such moving structures are clearly seen at AIA 171, 193, 211, 131, 94, 335 and 304 A, slit-jaw (SJI) 1330 and 1400 A. In order to analyze these moving structures, the CBP is cut along the moving direction with a curved slit from the AIA and SJI images. Then we can obtain the time-distance slices, including the intensity and intensity-derivative diagrams, from which, the moving structures are recognized as the oblique streaks, and they are characterized by the bi-direction, simultaneity, symmetry, and periodicity. The average speed is around 300 km/s, while the typically period is about 90 s. All these features (including the bi-directional fl...

  17. Proceedings of the third ICFA mini-workshop on high intensity, high brightness hadron accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Roser, T.

    1997-11-01

    The third mini-workshop on high intensity, high brightness hadron accelerators was held at Brookhaven National Laboratory on May 7-9, 1997 and had about 30 participants. The workshop focussed on rf and longitudinal dynamics issues relevant to intense and/or bright hadron synchrotrons. A plenary session was followed by four sessions on particular topics. This document contains copies of the viewgraphs used as well as summaries written by the session chairs.

  18. Proceedings of the third ICFA mini-workshop on high intensity, high brightness hadron accelerators

    Energy Technology Data Exchange (ETDEWEB)

    Roser, T.

    1997-11-01

    The third mini-workshop on high intensity, high brightness hadron accelerators was held at Brookhaven National Laboratory on May 7-9, 1997 and had about 30 participants. The workshop focussed on rf and longitudinal dynamics issues relevant to intense and/or bright hadron synchrotrons. A plenary session was followed by four sessions on particular topics. This document contains copies of the viewgraphs used as well as summaries written by the session chairs.

  19. Low Cost Lithography Tool for High Brightness LED Manufacturing

    Energy Technology Data Exchange (ETDEWEB)

    Andrew Hawryluk; Emily True

    2012-06-30

    The objective of this activity was to address the need for improved manufacturing tools for LEDs. Improvements include lower cost (both capital equipment cost reductions and cost-ofownership reductions), better automation and better yields. To meet the DOE objective of $1- 2/kilolumen, it will be necessary to develop these highly automated manufacturing tools. Lithography is used extensively in the fabrication of high-brightness LEDs, but the tools used to date are not scalable to high-volume manufacturing. This activity addressed the LED lithography process. During R&D and low volume manufacturing, most LED companies use contact-printers. However, several industries have shown that these printers are incompatible with high volume manufacturing and the LED industry needs to evolve to projection steppers. The need for projection lithography tools for LED manufacturing is identified in the Solid State Lighting Manufacturing Roadmap Draft, June 2009. The Roadmap states that Projection tools are needed by 2011. This work will modify a stepper, originally designed for semiconductor manufacturing, for use in LED manufacturing. This work addresses improvements to yield, material handling, automation and throughput for LED manufacturing while reducing the capital equipment cost.

  20. Ultra High Brightness/Low Cost Fiber Coupled Packaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The focus of the proposed effort is maximizing the brightness of fiber coupled laser diode pump sources at a minimum cost. The specific innovation proposed is to...

  1. High Brightness HDR Projection Using Dynamic Freeform Lensing

    KAUST Repository

    Damberg, Gerwin

    2016-05-03

    Cinema projectors need to compete with home theater displays in terms of image quality. High frame rate and spatial resolution as well as stereoscopic 3D are common features today, but even the most advanced cinema projectors lack in-scene contrast and, more important, high peak luminance, both of which are essential perceptual attributes of images appearing realistic. At the same time, HDR image statistics suggest that the average image intensity in a controlled ambient viewing environment such as the cinema can be as low as 1% for cinematic HDR content and not often higher than 18%, middle gray in photography. Traditional projection systems form images and colors by blocking the source light from a lamp, therefore attenuating between 99% and 82% of light, on average. This inefficient use of light poses significant challenges for achieving higher peak brightness levels. In this work, we propose a new projector architecture built around commercially available components, in which light can be steered to form images. The gain in system efficiency significantly reduces the total cost of ownership of a projector (fewer components and lower operating cost), and at the same time increases peak luminance and improves black level beyond what is practically achievable with incumbent projector technologies. At the heart of this computational display technology is a new projector hardware design using phase modulation in combination with a new optimization algorithm that is capable of on-the-fly computation of freeform lens surfaces. © 2016 ACM.

  2. Spatial and Spectral Brightness Enhancement of High Power Semiconductor Lasers

    Science.gov (United States)

    Leidner, Jordan Palmer

    The performance of high-power broad-area diode lasers is inhibited by beam filamentation induced by free-carrier-based self-focusing. The resulting beam degradation limits their usage in high-brightness, high-power applications such as pumping fiber lasers, and laser cutting, welding, or marking. Finite-difference propagation method simulations via RSoft's BeamPROP commercial simulation suite and a custom-built MATLAB code were used for the study and design of laser cavities that suppress or avoid filamentation. BeamPROP was used to design a tapered, passive, multi-mode interference cavity for the creation of a self-phase-locking laser array, which is comprised of many single-mode gain elements coupled to a wide output coupler to avoid damage from local high optical intensities. MATLAB simulations were used to study the effects of longitudinal and lateral cavity confinement on lateral beam quality in conventional broad-area lasers. This simulation was expanded to design a laser with lateral gain and index prescription that is predicted to operate at or above state-of-the-art powers while being efficiently coupled to conventional telecom single-mode optical fibers. Experimentally, a commercial broad-area laser was coupled in the far-field to a single-mode fiber Bragg grating to provide grating-stabilized single-mode laser feedback resulting in measured spectral narrowing for efficient pump absorption. Additionally a 19 GHz-span, spatially resolved, self-heterodyne measurement was made of a broad-area laser to study the evolution/devolution of the mode content of the emitted laser beam with increasing power levels.

  3. Quantum emitters coupled to circular nanoantennas for high-brightness quantum light sources

    Science.gov (United States)

    Abudayyeh, Hamza A.; Rapaport, Ronen

    2017-09-01

    Engineering the directionality and emission rate of quantum light sources is essential in the development of modern quantum applications. In this work we use numerical calculations to optimise the brightness of a broadband quantum emitter positioned in a hybrid metal-dielectric circular periodic nanoantenna. The optimised structure features a photon collection efficiency of 74 % (82 % ) and a photon flux enhancement of over 10 (6) into a numerical aperture of 0.22 (0.50), respectively, corresponding to a direct coupling into two types of multi-mode fibres. To enhance the emission rate, we present a new circular nanoantenna design where a quantum emitter is attached to a silver nanocone at the centre of the antenna. After optimisation, we find a collection efficiency of 61 % (78 % ) into a numerical aperture of 0.22 (0.50), giving a brightness enhancement of 1000 (600) for an unpolarised emitter. The enhancements in both structures are broadband due to the low-quality factor of the device and are therefore ideal for room-temperature sources. This type of a scalable design can be utilised towards on-chip, high-brightness quantum light sources operating at room temperature.

  4. Low and High Surface Brightness Galaxies at Void Walls

    CERN Document Server

    Ceccarelli, L; Lambas, D G; Galaz, G; Padilla, N D

    2012-01-01

    We study the relative fraction of low and high surface brightness galaxies (LSBGs and HSBGs) at void walls in the SDSS DR7. We focus on galaxies in equal local density environments. We assume that the host dark-matter halo mass (for which we use SDSS group masses) is a good indicator of local density. This analysis allows to examine the behavior of the abundance of LSBG and HSBG galaxies at a fixed local density and distinguish the large-scale environment defined by the void geometry. We compare galaxies in the field, and in the void walls; the latter are defined as the volume of void shells of radius equal to that of the void. We find a significant decrement, a factor $\\sim 4$, of the relative fraction of blue, active star-forming LSBGs in equal mass groups at the void walls and the field. This decrement is consistent with an increase of the fraction of blue, active star-forming HSBGs. By contrast, red LSBGs and HSBGs show negligible changes. We argue that these results are consistent with a scenario where L...

  5. A Compact High-Brightness Heavy-Ion Injector

    CERN Document Server

    Westenskow, Glen; Grote, D P; Halaxa, Erni; Kwan, Joe W

    2005-01-01

    To provide compact high-brightness heavy-ion beams for Heavy Ion Fusion (HIF) accelerators, we have been experimenting with merging multi-beamlets in an injector which uses an RF plasma source. In an 80-kV 20-microsecond experiment, the RF plasma source has produced up to 5 mA of Ar+ in a single beamlet. An extraction current density of 100 mA/cm2 was achieved, and the thermal temperature of the ions was below 1 eV. More than 90% of the ions were in the Ar+ state, and the energy spread from charge exchange was found to be small. We have tested at full voltage gradient the first 4 gaps of a 61-beamlet injector design. Einzel lens were used to focus the beamlets while reducing the beamlet to beamlet space charge interaction. We will report on a converging 119 multi-beamlet source. Although the source has the same optics as a full 1.6 MV injector system, the test will be carried out at 400 kV due to the test stand HV limit. We will measure the beam’s emittance after the beamlets are merged and have bee...

  6. Conductively cooled high-power high-brightness bars and fiber-coupled arrays

    Science.gov (United States)

    Zhou, Hailong; Mondry, Mark; Fouksman, Michael; Weiss, Eli; Anikitchev, Serguei; Kennedy, Keith; Li, Jun; Zucker, Erik; Rudy, Paul; Kongas, Jukka; Haapamaa, Jouko; Lehkonen, Sami

    2005-03-01

    Solid-state-laser and fiber laser pumping, reprographics, medical and materials processing applications require high power, high-brightness bars and fiber-coupled arrays. Conductively cooled laser diode bars allow customers to simplify system design and reduce operational size, weight, and costs. We present results on next generation high brightness, high reliability bars and fiber-coupled arrays at 790-830 nm, 940 nm and 980 nm wavelengths. By using novel epitaxial structures, we have demonstrated highly reliable 808 nm, 30% fill-factor conductively cooled bars operating at 60W CW mode, corresponding to a linear power density (LPD) of 20 mW/&mum. At 25°C, the bars have shown greater than 50% wall-plug-efficiency (WPE) when operating at 60W. Our novel approach has also reduced the fast-axis divergence FWHM from 31° to less than 24°. These bars have a 50% brightness improvement compared to our standard products with this geometry. At 980nm, we have demonstrated greater than 100W CW from 20% fill-factor conductively cooled bars, corresponding to a LPD of 50 mW/μm. At 25°C, the WPE for 976nm bars consistently peaks above 65% and remains greater than 60% at 100W. We coupled the beam output from those high-brightness bars into fiber-array-packages ("FAPs"), and we also achieved high-brightness and high-efficiency FAPs. We demonstrated 60W from a 600μm core-diameter fiber-bundle with a high WPE of 55%, and a low numerical aperture of 0.115. The brightness of such FAPs is four times higher than our standard high-power 40W FAP products at Coherent. Ongoing life test data suggests an extrapolated lifetime greater than 10,000 hours at 80W CW operating-condition based on 30%FF conductively cooled bar geometry.

  7. Adapting High Brightness Relativistic Electron Beams for Ultrafast Science

    Science.gov (United States)

    Scoby, Cheyne Matthew

    This thesis explores the use of ultrashort bunches generated by a radiofrequency electron photoinjector driven by a femtosecond laser. Rf photoinjector technology has been developed to generate ultra high brightness beams for advanced accelerators and to drive advanced light source applications. The extremely good quality of the beams generated by this source has played a key role in the development of 4th generation light sources such as the Linac Coherent Light Source, thus opening the way to studies of materials science and biological systems with high temporal and spatial resolution. At the Pegasus Photoinjector Lab, we have developed the application of a BNL/SLAC/UCLA 1.6-cell rf photoinjector as a tool for ultrafast science in its own right. It is the aim of this work to explore the generation of ultrashort electron bunches, give descriptions of the novel ultrafast diagnostics developed to be able to characterize the electron bunch and synchronize it with a pump laser, and share some of the scientific results that were obtained with this technology at the UCLA Pegasus laboratory. This dissertation explains the requirements of the drive laser source and describes the principles of rf photoinjector design and operation necessary to produce electron bunches with an rms longitudinal length < 100 femtoseconds containing 107 - 108 electrons per bunch. In this condition, when the laser intensity is sufficiently high, multiphoton photoemission is demonstrated to be more efficient in terms of charge yield than single photon photoemission. When a short laser pulse hits the cathode the resulting beam dynamics are dominated by a strong space charge driven longitudinal expansion which leads to the creation of a nearly ideal uniformly filled ellipsoidal distribution. These beam distributions are characterized by linear space charge forces and hence by high peak brightness and small transverse emittances. This regime of operation of the RF photoinjector is also termed the

  8. Preliminary study on direct assimilation of cloud-affected satellite microwave brightness temperatures

    Science.gov (United States)

    Zhang, Sibo; Guan, Li

    2017-02-01

    Direct assimilation of cloud-affected microwave brightness temperatures from AMSU-A into the GSI three-dimensional variational (3D-Var) assimilation system is preliminarily studied in this paper. A combination of cloud microphysics parameters retrieved by the 1D-Var algorithm (including vertical profiles of cloud liquid water content, ice water content, and rain water content) and atmospheric state parameters from objective analysis fields of an NWP model are used as background fields. Three cloud microphysics parameters (cloud liquid water content, ice water content, and rain water content) are applied to the control variable. Typhoon Halong (2014) is selected as an example. The results show that direct assimilation of cloud-affected AMSU-A observations can effectively adjust the structure of large-scale temperature, humidity and wind analysis fields due to the assimilation of more AMSU-A observations in typhoon cloudy areas, especially typhoon spiral cloud belts. These adjustments, with temperatures increasing and humidities decreasing in the movement direction of the typhoon, bring the forecasted typhoon moving direction closer to its real path. The assimilation of cloud-affected satellite microwave brightness temperatures can provide better analysis fields that are more similar to the actual situation. Furthermore, typhoon prediction accuracy is improved using these assimilation analysis fields as the initial forecast fields in NWP models.

  9. A high-brightness thermionic microwave electron gun

    Energy Technology Data Exchange (ETDEWEB)

    Borland, Michael [Stanford Univ., CA (United States)

    1991-02-01

    In a collaborative effort by SSRL, AET Associates, and Varian Associates, a high-brightness microwave electron gun using a thermionic cathode has been designed, built, tested, and installed for use with the SSRL 150 MeV linear accelerator. This thesis discusses the physics behind the design and operation of the gun and associated systems, presenting predictions and experimental tests of the gun`s performance. The microwave gun concept is of increasing interest due to its promise of providing higher-current, lower-emittance electron beams than possible from conventional, DC gun technology. In a DC guns, accelerating gradients are less than 8 MV/m, while those in a microwave gun can exceed 100 MV/m, providing much more rapid initial acceleration, thereby reducing the deleterious effects of space-charge. Microwave guns produce higher momentum beams than DC guns, thus lessening space-charge effects during subsequent beam transport. Typical DC guns produce kinetic energies of 80--400 KeV, compared to 2--3 MeV for the SSRL microwave gun. ``State-of-the-art`` microwave gun designs employ laser-driven photocathodes, providing excellent performance but with greater complexity and monetary costs. A thermionic microwave gun with a magnetic bunching system is comparable in cost and complexity to a conventional system, but provides performance that is orders of magnitude better. Simulations of the SSRL microwave gun predict a normalized RMS emittance at the gun exist of < 10 π • mec • μm for a beam consisting of approximately 50% of the particles emitted from the gun, and having a momentum spread ±10%. These emittances are for up to 5 x 109e- per bunch. Chromatic aberrations in the transport line between the gun and linear accelerator increase this to typically < 30 π • me • μm.

  10. High brightness diode lasers controlled by volume Bragg gratings

    Science.gov (United States)

    Glebov, Leonid

    2017-02-01

    Volume Bragg gratings (VBGs) recorded in photo-thermo-refractive (PTR) glass are holographic optical elements that are effective spectral and angular filters withstanding high power laser radiation. Reflecting VBGs are narrow-band spectral filters while transmitting VBGs are narrow-band angular filters. The use of these optical elements in external resonators of semiconductor lasers enables extremely resonant feedback that provides dramatic spectral and angular narrowing of laser diodes radiation without significant power and efficiency penalty. Spectral narrowing of laser diodes by reflecting VBGs demonstrated in wide spectral region from near UV to 3 μm. Commercially available VBGs have spectral width ranged from few nanometers to few tens of picometers. Efficient spectral locking was demonstrated for edge emitters (single diodes, bars, modules, and stacks), vertical cavity surface emitting lasers (VCSELs), grating coupled surface emitting lasers (GCSELs), and interband cascade lasers (ICLs). The use of multiplexed VBGs provides multiwavelength emission from a single emitter. Spectrally locked semiconductor lasers demonstrated CW power from milliwatts to a kilowatt. Angular narrowing by transmitting VBGs enables single transverse mode emission from wide aperture diode lasers having resonators with great Fresnel numbers. This feature provides close to diffraction limit divergence along a slow axis of wide stripe edge emitters. Radiation exchange between lasers by means of spatially profiled or multiplexed VBGs enables coherent combining of diode lasers. Sequence of VBGs or multiplexed VBGs enable spectral combining of spectrally narrowed diode lasers or laser modules. Thus the use of VBGs for diode lasers beam control provides dramatic increase of brightness.

  11. High-brightness, fiber-coupled pump modules in fiber laser applications

    Science.gov (United States)

    Hemenway, Marty; Urbanek, Wolfram; Hoener, Kylan; Kennedy, Keith W.; Bao, Ling; Dawson, David; Cragerud, Emily S.; Balsley, David; Burkholder, Gary; Reynolds, Mitch; Price, Kirk; Haden, Jim; Kanskar, Manoj; Kliner, Dahv A.

    2014-03-01

    High-power, high-brightness, fiber-coupled pump modules enable high-performance industrial fiber lasers with simple system architectures, multi-kW output powers, excellent beam quality, unsurpassed reliability, and low initial and operating costs. We report commercially available (element™), single-emitter-based, 9xx nm pump sources with powers up to 130 W in a 105 μm fiber and 250 W in a 200 μm fiber. This combination of high power and high brightness translates into improved fiber laser performance, e.g., simultaneously achieving high nonlinear thresholds and excellent beam quality at kW power levels. Wavelength-stabilized, 976 nm versions of these pumps are available for applications requiring minimization of the gain-fiber length (e.g., generation of high-peak-power pulses). Recent prototypes have achieved output powers up to 300 W in a 200 μm fiber. Extensive environmental and life testing at both the chip and module level under accelerated and real-world operating conditions have demonstrated extremely high reliability, with innovative designs having eliminated package-induced-failure mechanisms. Finally, we report integrated Pump Modules that provide conveniently formatted for fiber-laser pumping or direct-diode applications; these 19" rack-mountable, 2U units combine the outputs of up to 14 elements™ using fused-fiber combiners, and they include high-efficiency diode drivers and safety sensors.

  12. Stellar Systems in the direction of the Hickson Compact Group 44 - I. Low Surface Brightness Galaxies

    CERN Document Server

    Castelli, A V Smith; Escudero, C G

    2016-01-01

    Context. In spite of the numerous studies of low-luminosity galaxies in different environments, there is still no consensus about their formation scenario. In particular, a large number of galaxies displaying extremely low-surface brightnesses have been detected in the last year, and the nature of these objects is under discussion. Aims. In this paper we report the detection of two extended low-surface brightness (LSB) objects (mueff_g'~27 mag) found, in projection, next to NGC 3193 and in the zone of the Hickson Compact Group (HCG) 44, respectively. Methods. We analyzed deep, high-quality, GEMINI-GMOS images with ELLIPSE within IRAF in order to obtain their brightness profiles and structural parameters. We also search for the presence of globular clusters (GC) in these fields. Results. We have found that, if these LSB galaxies were at the distances of NGC 3193 and HCG 44, they would show sizes and luminosities similar to those of the ultra-diffuse galaxies (UDGs) found in the Coma cluster and other associati...

  13. Stellar systems in the direction of the Hickson Compact Group 44. I. Low surface brightness galaxies

    Science.gov (United States)

    Smith Castelli, A. V.; Faifer, F. R.; Escudero, C. G.

    2016-11-01

    Context. In spite of the numerous studies of low-luminosity galaxies in different environments, there is still no consensus about their formation scenario. In particular, a large number of galaxies displaying extremely low-surface brightnesses have been detected in the last year, and the nature of these objects is under discussion. Aims: In this paper we report the detection of two extended low-surface brightness (LSB) objects (μeffg' ≃ 27 mag) found, in projection, next to NGC 3193 and in the zone of the Hickson Compact Group (HCG) 44, respectively. Methods: We analyzed deep, high-quality, GEMINI-GMOS images with ELLIPSE within IRAF in order to obtain their brightness profiles and structural parameters. We also searched for the presence of globular clusters (GC) in these fields. Results: We have found that, if these LSB galaxies were at the distances of NGC 3193 and HCG 44, they would show sizes and luminosities similar to those of the ultra-diffuse galaxies (UDGs) found in the Coma cluster and other associations. In that case, their sizes would be rather larger than those displayed by the Local Group dwarf spheroidal (dSph) galaxies. We have detected a few unresolved sources in the sky zone occupied by these galaxies showing colors and brightnesses typical of blue globular clusters. Conclusions: From the comparison of the properties of the galaxies presented in this work with those of similar objects reported in the literature, we have found that LSB galaxies display sizes covering a quite extended continous range (reff 0.3-4.5 kpc), in contrast to "normal" early-type galaxies, which show reff 1.0 kpc with a low dispersion. This fact might point to different formation processes for both types of galaxies.

  14. South African night sky brightness during high aerosol epochs

    CERN Document Server

    Winkler, Hartmut; Marang, Fred

    2014-01-01

    Sky conditions in the remote, dry north-western interior of South Africa are now the subject of considerable interest in view of the imminent construction of numerous solar power plants in this area. Furthermore, the part of this region in which the core of the SKA is to be located (which includes SALT) has been declared an Astronomical Advantage Zone, for which sky brightness monitoring will now be mandatory. In this project we seek to characterise the sky brightness profile under a variety of atmospheric conditions. Key factors are of course the lunar phase and altitude, but in addition the sky brightness is also significantly affected by the atmospheric aerosol loading, as that influences light beam scattering. In this paper we chose to investigate the sky characteristics soon after the Mount Pinatubo volcanic eruption in 1991, which resulted in huge ash masses reaching the stratosphere (where they affected solar irradiance for several years). We re-reduced photometric sky measurements from the South Afric...

  15. Short Pulse High Brightness X-ray Production with the PLEIADES Thomson Scattering Source

    Energy Technology Data Exchange (ETDEWEB)

    Anderson, S G; Barty, C P J; Betts, S M; Brown, W J; Crane, J K; Cross, R R; Fittinghoff, D N; Gibson, D J; Hartemann, F V; Kuba, J; LaSage, G P; Rosenzweig, J B; Slaughter, D R; Springer, P T; Tremaine, A M

    2003-07-01

    We describe PLEIADES, a compact, tunable, high-brightness, ultra-short pulse, Thomson x-ray source. The peak brightness of the source is expected to exceed 10{sup 20} photons/s/0.1% bandwidth/mm{sup 2}/mrad{sup 2}. Initial results are reported and compared to theoretical calculations.

  16. Generation and propagation of high-brightness electron beams from a magnetically crowbarred injector

    Science.gov (United States)

    Humphries, S., Jr.; Len, L. K.; Allen, C. B.

    1987-05-01

    Tests of a 300-keV electrostatic electron beam injector with a magnetic crowbar switch are described. The saturable ferrite core switch allows generation of a constant voltage, 80-ns pulse directly from a Marx generator. Inductive isolation in the switch permits direct access to the high-voltage electrode for thermionic or active plasma cathode experiments. The pulse modulator can drive a 1.5-kA load. A high brightness 290-A beam from a felt plasma-emission cathode was extracted and propagated in vacuum. Because of the reliability of the magnetic crowbar switch, more than 500 shots were accumulated on the cathode at over 1 kA/sq cm with no degradation of the output. The output beam had a normalized brightness of 2.6 x 10 to the 8th A/(m rad) sq. A solenoidal lens was used to match the space-charge-dominated beam into a 1-m-long periodic focusing system with 25 reversing solenoidal coils. A beam current of 150 A was successfully transported through the 1.7-cm radius tube.

  17. High cortisol awakening response is associated with an impairment of the effect of bright light therapy

    DEFF Research Database (Denmark)

    Martiny, Klaus Per Juul; Lunde, Marianne Anita; Undén, M;

    2009-01-01

    OBJECTIVE: We investigated the predictive validity of the cortisol awakening response (CAR) in patients with non-seasonal major depression. METHOD: Patients were treated with sertraline in combination with bright or dim light therapy for a 5-week period. Saliva cortisol levels were measured in 63...... patients, as an awakening profile, before medication and light therapy started. The CAR was calculated by using three time-points: awakening and 20 and 60 min after awakening. RESULTS: Patients with low CAR had a very substantial effect of bright light therapy compared with dim light therapy, whereas...... patients with a high CAR had no effect of bright light therapy compared with dim light therapy. CONCLUSION: High CAR was associated with an impairment of the effect of bright light therapy. This result raises the question of whether bright light acts through a mechanism different from...

  18. The High Luminosity Challenge: potential and limitations of High Intensity High Brightness in the LHC and its injectors

    CERN Document Server

    De Maria, R; Banfi, D; Barranco, J; Bartosik, H; Benedetto, E; Bruce, R; Brüning, O; Calaga, R; Cerutti, F; Damerau, H; Esposito, L; Fartoukh, S; Fitterer, M; Garoby, R; Gilardoni, S; Giovannozzi, M; Goddard, B; Gorini, B; Hanke, K; Iadarola, G; Lamont, M; Meddahi, M; Métral, E; Mikulec, B; Mounet, N; Papaphilippou, Y; Pieloni, T; Redaelli, S; Rossi, L; Rumolo, G; Shaposhnikova, E; Sterbini, G; Todesco, E; Tomás, R; Zimmermann, F; Valishev, A

    2014-01-01

    High-intensity and high-brightness beams are key ingredients to maximize the LHC integrated luminosity and to exploit its full potential. This contribution describes the optimization of beam and machine parameters to maximize the integrated luminosity as seen by the LHC experiments, by taking into account the expected intensity and brightness reach of LHC itself and its injector chain as well as the capabilities of the detectors for next run and foreseen upgrade scenarios.

  19. Compact stacking of diode lasers for pulsed light sources of high brightness.

    Science.gov (United States)

    Alahautala, Taito; Lassila, Erkki; Hernberg, Rolf

    2004-07-20

    A compact stacking architecture for high-power diode-laser arrays is proposed and compared with traditional stacks. The objective of compact stacking is to achieve high brightness values without the use of microlenses. The calculated brightness for a compact stack is over 300 W mm(-2) sr(-1), which is approximately 40 times higher than that of a traditional stack made of similar laser emitters. Even higher brightness values of over 600 W mm(-2) sr(-1) were reached in practice. A laser head was manufactured in which the light from several compact laser stacks could be fiber coupled or the light could be transformed to a highly uniform beam.

  20. High Brightness Proton Beams for LHC: Needs and Means

    CERN Document Server

    Benedikt, Michael; High Energy High Intensity Hadron Beams (HHH 2004)

    2005-01-01

    Experiments [1, 2] have proven that the LHC injector chain can deliver a proton beam with the nominal characteristics (bunch intensity Nb=1.15E11 protons per bunch (ppb) in normalised rms transverse emittances of 3.5 mm.mrad), but cannot reach the ultimate performance (1.7E11 ppb in the same emittances). Moreover, in the longer term, an even higher beam brightness is required by all methods considered for increasing the LHC luminosity beyond the present ultimate level. Improvements and/or new processes are therefore needed, especially in the low energy accelerators. A number of solutions have already been imagined for the PS complex that involve new linac(s) or/and sophisticated beam gymnastics. The present capabilities and limitations of the accelerator chain are described. The needs of the possible LHC luminosity upgrades are outlined, the proposed improvements are explained and their features and performance are compared.

  1. Overview on production and dynamics of high brightness beams

    Energy Technology Data Exchange (ETDEWEB)

    Serafini, L. [INFN-Milano and UCLA Dept. of Physics and Astronomy, 405 Hilgard Ave., Los Angeles, California 90095-1547 (United States)

    1997-02-01

    The advent of laser driven RF Photoinjectors has raised the interest in the beam dynamics associated with intense, quasi-laminar, space charge dominated electron beams: the relevant phenomena observed in such a new regime of beam physics are presented and discussed in this paper. Most of the emphasis is focused on the analysis of the so called emittance correction technique, which is applied in the operation of RF guns in order to enhance the performances of these devices in terms of the attainable beam brightness, i.e., minimizing the beam emittance. A fully analytical description of this process is presented, based on an envelope equation treatment which leads to the concept of {ital invariant envelope}. The implications of such a concept are discussed and specific examples are given to compare the analytical predictions to the results of numerical simulations. {copyright} {ital 1997 American Institute of Physics.}

  2. Plasmon-enhanced photocathode for high brightness and high repetition rate x-ray sources

    Energy Technology Data Exchange (ETDEWEB)

    Polyakov, Aleksandr; Senft, Christoph; Thompson, K. F.; Feng, J.; Cabrini, S.; Schuck, P. J.; Padmore, Howard; Peppernick, Samuel J.; Hess, Wayne P.

    2013-02-11

    High brightness electron sources are at the heart of anew generation of x-ray sources based on the Free ElectronLaser (FEL) as well as in Energy Recovery Linac (ERL) and Inverse Compton Scattering (ICS) sources.The source of electrons consists of a photoinjector, comprised of a laser-driven photocathode in a high gradient electric field produced by an rf cavity. The function of the rf cavity is to provide a field sufficient for acceleration of electrons to relativistic velocity over a small distance, thus minimizing effects of the space-charge. Even so, the dense electron beam required for high brightness suffers from a space charge field that chirps and reshapes the electron pulse increasing beam emittance and thus reducing the overall brightness. This emittance growth can be avoided if the initial distribution of electrons is pancake shaped, with a semicircular transverse intensity profile. In this case, the electron distribution develops under its space charge field from a pancake into a uniformly filled ellipsoidal beam. This condition, referred to as the blowout regime, requires ultrashort pulses less than 100 fs long and has been successfully demonstrated recently in a high gradient photoinjector.

  3. Design of high-brightness TEM00-mode solar-pumped laser for renewable material processing

    Science.gov (United States)

    Liang, D.; Almeida, J.

    2014-08-01

    The conversion of sunlight into laser light by direct solar pumping is of ever-increasing importance because broadband, temporally constant, sunlight is converted into laser light, which can be a source of narrowband, collimated, rapidly pulsed, radiation with the possibility of obtaining extremely high brightness and intensity. Nonlinear processes, such as harmonic generation, might be used to obtain broad wavelength coverage, including the ultraviolet wavelengths, where the solar flux is very weak. The direct excitation of large lasers by sunlight offers the prospect of a drastic reduction in the cost of coherent optical radiation for high average power materials processing. This renewable laser has a large potential for many applications such as high-temperature materials processing, renewable magnesium-hydrogen energy cycle and so on. We propose here a scalable TEM00 mode solar laser pumping scheme, which is composed of four firststage 1.13 m diameter Fresnel lenses with its respective folding mirrors mounted on a two-axis automatic solar tracker. Concentrated solar power at the four focal spots of these Fresnel lenses are focused individually along a common 3.5 mm diameter, 70 mm length Nd:YAG rod via four pairs of second-stage fused-silica spherical lenses and third-stage 2D-CPCs (Compound Parabolic Concentrator), sitting just above the laser rod which is also double-pass pumped by four V-shaped pumping cavities. Distilled water cools both the rod and the concentrators. 15.4 W TEM00 solar laser power is numerically calculated, corresponding to 6.7 times enhancement in laser beam brightness.

  4. A study on materials of steels by high brightness X-ray

    CERN Document Server

    Tsuzaki, K; Umezawa, O; Hara, T; Takahashi, T; Omura, T; Hayakawa, M; Yamauchi, Y

    2001-01-01

    As the survey study on materials analysis of steels using high brightness X-ray, under aiming to clarify direct experimental facts on deformations, failure phenomena, and metal textures forming at interior portions of bulk materials, feasibility on materials research and development using SPring-8 was surveyed. Its concrete items were summarized to fields shown as follows: 1) acquirement of foundation on synchrotron X-ray, 2) visualization of cracks and artificial cracks in metal bulk samples by using refraction imaging (point light source topography), 3) visualization of the second phase in the metal bulk samples by using refraction imaging, and 4) speciation of carbon elements in steel cords by Moessbauer spectroscopy. Together with clarifying problems more and more by the survey and some experiments, subjects and understandings vacantly considered at standpoints of materials researchers could be arranged and defined. (G.K.)

  5. Development of high-brightness high-power fiber laser pump sources

    Science.gov (United States)

    Priest, J. A.; Faircloth, Brian O.; Swint, Reuel B.; Coleman, James J.; Forbes, David V.; Zediker, Mark S.

    2004-06-01

    High power fiber lasers have strong potential for use in both commercial and military applications. Improved wall plug efficiency over Nd:YAG and CO2 lasers combined with up to a 10-fold improvement in beam quality, make fiber lasers extremely attractive for industrial applications such as welding and cutting. In military applications, fiber lasers offer a simplified logistic train, a deep magazine limited only by electric power, and a compact footprint, allowing theater defense and self-protection of combat platforms with speed of light engagement and flexible response. Commercial viability of these systems, however, is limited by the availability of compact, cost effective, and reliable diode laser pump sources in the multi-kilowatt regime. The relatively low brightness of diode laser sources has complicated the task of building high power pumps at a reasonable cost. In response to this need, Nuvonyx, Inc. in conjunction with the University of Illinois at Urbana-Champaign, has been developing a new technology for producing high power, single lateral mode devices which do not suffer form the instabilities mentioned above. The waveguide consists of a narrow section, approximately 2 μm wide, which flares to approximately 12 μm wide at the output facet. The flaring of the waveguide increases the gain volume and reduces the optical power density at the facet allowing for higher output power capability. The index guide is defined using an epitaxial process which allows the confinement of the mode to be reduced as the width of the guide expands. Thus, the mode is confined in a single mode waveguide throughout the cavity maintaining stability of the mode to the emitting facet. In November 2002, Nuvonyx, Inc. was awarded a contract with the Air Force Research Lab, Kirtland AFB, Albuquerque, NM, to transition these devices to production quality for use in high-power fiber laser pumps. Partnered with Alfalight, Inc. and the University of Illinois, we have begun initial

  6. Next Generation High Brightness Electron Beams From Ultra-High Field Cryogenic Radiofrequency Photocathode Sources

    CERN Document Server

    Rosenzweig, J B; Dolgashev, V; Emma, C; Fukusawa, A; Li, R; Limborg, C; Maxson, J; Musumeci, P; Nause, A; Pakter, R; Pompili, R; Roussel, R; Spataro, B; Tantawi, S

    2016-01-01

    Recent studies of the performance of radio-frequency (RF) copper structures operated at cryogenic temperatures have shown a dramatic increase in the maximum surface electric field that may be reached. We propose to utilize this development to enable a new generation of photoinjectors operated at cryogenic temperatures that may attain, through enhancement of the launch field at the photocathode by a factor of four, well over an order of magnitude increase in peak electron beam brightness. We present detailed studies of the beam dynamics associated with such a system, concentrating on an emittance-compensated S-band photoinjector that may directly substitute that of the LCLS X-ray free-electron laser. We show in this case that the increase in brightness leads directly to a factor of two reduction in gain length, with attendant increase in X-ray radiative efficiency. Extreme low emittance scenarios obtained at low operating charge, appropriate for dramatically pushing performance limits of ultrafast electron dif...

  7. Ultra High Brightness/Low Cost Fiber Coupled Packaging Project

    Data.gov (United States)

    National Aeronautics and Space Administration — High peak power, high efficiency, high reliability lightweight, low cost QCW laser diode pump modules with up to 1000W of QCW output become possible with nLight's...

  8. A high brightness proton injector for the Tandetron accelerator at Jožef Stefan Institute

    Energy Technology Data Exchange (ETDEWEB)

    Pelicon, Primož, E-mail: primoz.pelicon@ijs.si [Jožef Stefan Institute, Association EURATOM-MHEST, Jamova 39, SI-1000 Ljubljana (Slovenia); Podaru, Nicolae C., E-mail: info@highvolteng.com [High Voltage Engineering Europa B.V., P.O. Box 99, Amersfoort 3800AB (Netherlands); Vavpetič, Primož; Jeromel, Luka [Jožef Stefan Institute, Association EURATOM-MHEST, Jamova 39, SI-1000 Ljubljana (Slovenia); Ogrinc Potocnik, Nina [Jožef Stefan Institute, Association EURATOM-MHEST, Jamova 39, SI-1000 Ljubljana (Slovenia); LOTRIČ Metrology ltd, Selca 163, SI-4227 Selca (Slovenia); Ondračka, Simon [Jožef Stefan Institute, Association EURATOM-MHEST, Jamova 39, SI-1000 Ljubljana (Slovenia); Gottdang, Andreas; Mous, Dirk J.M. [High Voltage Engineering Europa B.V., P.O. Box 99, Amersfoort 3800AB (Netherlands)

    2014-08-01

    Jožef Stefan Institute recently commissioned a high brightness H{sup −} ion beam injection system for its existing tandem accelerator facility. Custom developed by High Voltage Engineering Europa, the multicusp ion source has been tuned to deliver at the entrance of the Tandetron™ accelerator H{sup −} ion beams with a measured brightness of 17.1 A m{sup −2} rad{sup −2} eV{sup −1} at 170 μA, equivalent to an energy normalized beam emittance of 0.767 π mm mrad MeV{sup 1/2}. Upgrading the accelerator facility with the new injection system provides two main advantages. First, the high brightness of the new ion source enables the reduction of object slit aperture and the reduction of acceptance angle at the nuclear microprobe, resulting in a reduced beam size at selected beam intensity, which significantly improves the probe resolution for micro-PIXE applications. Secondly, the upgrade strongly enhances the accelerator up-time since H and He beams are produced by independent ion sources, introducing a constant availability of {sup 3}He beam for fusion-related research with NRA. The ion beam particle losses and ion beam emittance growth imply that the aforementioned beam brightness is reduced by transport through the ion optical system. To obtain quantitative information on the available brightness at the high-energy side of the accelerator, the proton beam brightness is determined in the nuclear microprobe beamline. Based on the experience obtained during the first months of operation for micro-PIXE applications, further necessary steps are indicated to obtain optimal coupling of the new ion source with the accelerator to increase the normalized high-energy proton beam brightness at the JSI microprobe, currently at 14 A m{sup −2} rad{sup −2} eV{sup −1}, with the output current at 18% of its available maximum.

  9. Research on the high-brightness traffic variable message sign based on laser diodes

    Science.gov (United States)

    Feng, Li-li; Huang, Hai-tao; Ruan, Chi

    2015-10-01

    Researches indicate that foggy weather is one of the most critical factors that restrict human's traffic activities and cause traffic accidents. It will reduce the visibility of traffic message board, which could cause the insecurity of transportation. Commonly, light-emitting diodes (LEDs) were used as light source for variable message sign, which could not be seen clearly in the foggy low visibility condition. A high-brightness light source which could be used for variable information board was firstly put forward in this paper. And a new type of variable message sign used in low visibility condition was also introduced. Besides, the attenuation characteristics of laser diode (LD) and light-emitting diode (LED) were analyzed respectively. Calculation and simulation show that the attenuation of red light source is fastest, and the yellow LED light has the better transmittance property. In the experiment, LDs were used to make variable message board for verifying image definition. A 16*16 array structure composed of LDs was designed and could display Chinese characters. By comparing the display effect of LDs and LEDs driven with same power, they were placed in fog chamber of the visibility less than 5 meters. And experiment results show that the penetrability of red LD light is better than that of red LED. So traffic variable message sign based on LDs could improve the image definition and the information could be seen more clearly in the foggy weather. In addition to the high-brightness, good coherence, good direction, experimental results show that traffic variable message board based on LD has better visual effect in low visibility condition.

  10. High brightness 50 MeV Cyclotron for Accelerator-Driven Subcritical Fission

    Science.gov (United States)

    Assadi, Saeed; Badgley, Karie; Mann, Thomas; McIntyre, Peter; Pogue, Nathaniel; Sattarov, Akhdiyor

    2011-10-01

    The Accelerator Research Lab at Texas A&M University is developing new accelerator technology for a high-brightness, high-current cyclotron with capabilities that will be beneficial for applications to accelerator-driven subcritical fission, medical isotope production, and proton therapy. As a first embodiment of the technology, we are developing a detailed design for TAMU-50, a 50 MeV, 5 mA proton cyclotron with high beam brightness. In this presentation we present devices and beamline components for injection, extraction, controls and diagnostics. We emphasize the system integration and implementation of TAMU-50 for production of medical radioisotopes.

  11. Development of components for the high brightness laser. Final report May 77-Jun 80

    Energy Technology Data Exchange (ETDEWEB)

    Garmire, E.

    1980-10-01

    In 1979 DBR lasers were fabricated and their properties studied. Further investigations were undertaken of the beam expander, to determine its potential for the high brightness laser. From this data it was determined that a design change for the high brightness laser is required. This design change is described. In addition, measurements were made on laser amplification to compare this method of achieving higher power compared to the coupled diode arrays. Finally, as a spin-off of this research, a new design for a single mode laser was discovered, using the active/passive laser, a configuration which was fabricated as a first step toward fabrication of DBR lasers. Each of these research efforts are described in this report. Monolithic integration of the necessary components on one substrate for the high brightness laser has been hindered by problems in material and fabrication uniformity. This will be described, and projections for future development will be outlined.

  12. High-Brightness High-Energy Electron Beams from a Laser Wakefield Accelerator via Energy Chirp Control

    Science.gov (United States)

    Wang, W. T.; Li, W. T.; Liu, J. S.; Zhang, Z. J.; Qi, R.; Yu, C. H.; Liu, J. Q.; Fang, M.; Qin, Z. Y.; Wang, C.; Xu, Y.; Wu, F. X.; Leng, Y. X.; Li, R. X.; Xu, Z. Z.

    2016-09-01

    By designing a structured gas density profile between the dual-stage gas jets to manipulate electron seeding and energy chirp reversal for compressing the energy spread, we have experimentally produced high-brightness high-energy electron beams from a cascaded laser wakefield accelerator with peak energies in the range of 200-600 MeV, 0.4%-1.2% rms energy spread, 10-80 pC charge, and ˜0.2 mrad rms divergence. The maximum six-dimensional brightness B6 D ,n is estimated as ˜6.5 ×1 015 A /m2/0.1 % , which is very close to the typical brightness of e beams from state-of-the-art linac drivers. These high-brightness high-energy e beams may lead to the realization of compact monoenergetic gamma-ray and intense coherent x-ray radiation sources.

  13. Innovative Facet Passivation for High-Brightness Laser Diodes

    Science.gov (United States)

    2016-02-05

    views, opinions and/or findings contained in this report are those of the author(s) and should not contrued as an official Department of the Army...factor bar) desired for military high energy lasers (HELs). COD of the front facet (laser mirror) is the main failure mechanism that constrains scaling...TOTAL: Books Number of Manuscripts: Patents Submitted Patents Awarded Awards Graduate Students Names of Post Doctorates Received Book TOTAL: Received

  14. Current State of the Art in High Brightness LEDs

    Science.gov (United States)

    Craford, George

    2007-03-01

    LED's have been commercially available since the 1960's. For many years they were used primarily for indicator applications. The remarkable increase in materials technology and efficiency that has been achieved since the early 1990's for AlInGaP red and amber LEDs, and InGaN green and blue LEDs, has enabled the penetration of markets such as outdoor display, signaling, and automotive brake light and turn signal applications. White LEDs, which are either blue LEDs combined with a phosphor, or a combination of red, green, and blue LEDs, are being used in emerging applications such as cell phone flash, television backlights, projection, and automotive headlights. In addition, to efficiency improvements these applications have required the development of higher power packages and, in some of these applications which are etendue limited, higher luminance devices. High power devices are commercially available which are capable of 140 lumens output and have an efficacy of around 70 lm/W for white emission. New package and chip technologies have been demonstrated which have a luminance of 38 mega nits (Mcd/m^2), approximately 50% more luminance than that of an automotive headlamp halogen bulb (˜25 mega nits). The recent progress in materials technology, packaging, and chip technology makes it clear that LED's will become important for general illumination applications. The rate of LED penetration of this market will depend upon continued increases in performance and lower costs as well as better control of the white spectral emission. Efficiency, current density, and costs are closely linked because the cost in dollars/lumen is inversely proportional to how many lumens can be realized from each unit of device area for a given device type. Performance as high as 138 lm/W, and over 40% wall plug efficiency, has been reported for low power research devices and over 90 lm/W for high power research devices. It is clear that high power commercial products with performance in

  15. Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Blomberg, Ben [NICADD, DeKalb; Mihalcea, Daniel [NICADD, DeKalb; Panuganti, Harsha [NICADD, DeKalb; Piot, Philippe [Fermilab; Brau, Charles [Vanderbilt U.; Choi, Bo [Vanderbilt U.; Gabella, William [Vanderbilt U.; Ivanov, Borislav [Vanderbilt U.; Mendenhall, Marcus [Vanderbilt U.; Lynn, Christopher [Swarthmore Coll.; Sen, Tanaji [Fermilab; Wagner, Wolfgang [Forschungszentrum Dresden Rossendorf

    2014-07-01

    In this contribution we describe the technical details and experimental setup of our study aimed at producing high-brightness channeling radiation (CR) at Fermilab’s new user facility the Advanced Superconducting Test Accelerator (ASTA). In the ASTA photoinjector area electrons are accelerated up to 40-MeV and focused to a sub-micron spot on a ~40 micron thick carbon diamond, the electrons channel through the crystal and emit CR up to 80-KeV. Our study utilizes ASTA’s long pulse train capabilities and ability to preserve ultra-low emittance, to produce the desired high average brightness.

  16. The Impact of Florida's Bright Futures Scholarship Program on High School Performance and College Enrollment

    Science.gov (United States)

    Harkreader, Steve; Hughes, John; Tozzi, Melanie Hicks; Vanlandingham, Gary

    2008-01-01

    Florida's Bright Futures program is one of the nation's largest merit-based scholarship initiatives. This study used high school transcript and college enrollment data to examine the program's impact on high school course-taking patterns, school grades, college entrance exam scores, and rates of college attendance over time. The study indicates…

  17. High-Precision Measurements of Brightness Variation of Nereid

    CERN Document Server

    Terai, Tsuyoshi

    2012-01-01

    Nereid, a satellite of Neptune, has a highly eccentric prograde orbit with a semi-major axis larger than 200 Neptune radius and is classified as an irregular satellite. Although the capture origin of irregular satellites has been widely accepted, several previous studies suggest that Nereid was formed in the circumplanetary disk of Neptune and was ejected outward to the present location by Triton. Our time-series photometric observations confirm that the spin is stable and non-chaotic with a period of 11.5 hr as indicated by Grav et al. (2003). The optical colors of Nereid are indistinguishable from those of trans-Neptunian objects and Centaurs, especially those with neutral colors. We also find the consistency of Nereid's rotation with the size-rotation distribution of small outer bodies. It is more likely that Nereid originates in an immigrant body captured from a heliocentric orbit which was 4-5 AU away from Neptune's orbit.

  18. Search for high energy neutrinos from bright GRBs with ANTARES

    Directory of Open Access Journals (Sweden)

    Sanguineti M.

    2017-01-01

    Full Text Available Gamma-ray bursts are a possible site of hadronic acceleration, thus neutrinos are expected in correspondence of a GRB event. The brightest GRB observed between 2008 and 2013 (GRB080916C, GRB110918A, GRB130427A and GRB130505A have been investigated using the data of the ANTARES high energy neutrino telescope. In this paper two of most promising models of the GRB neutrino emission will be studied: the internal shock model and the photospheric model. No muons have been measured in space and time correlation with the selected GRBs and upper limits at 90% C.L. on the expected neutrino fluxes have been derived. This measure allows also setting constraints on some parameters used in the modeling of the neutrino flux: the bulk Lorentz factor of the jet Г and the baryon loading fp.

  19. High brightness diode-pumped organic solid-state laser

    CERN Document Server

    Zhao, Zhuang; Nafa, Malik; Chénais, Sébastien; Forget, Sébastien

    2015-01-01

    High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling leads to a pump slope efficiency of 11% for a DCM based VECSOLs. We report output pulse energy up to 280 nJ with 100 ns long pump pulses, leading to a peak power of 3.5 W in a circularly symmetric, diffraction-limited beam.

  20. High brightness diode-pumped organic solid-state laser

    Science.gov (United States)

    Zhao, Zhuang; Mhibik, Oussama; Nafa, Malik; Chénais, Sébastien; Forget, Sébastien

    2015-02-01

    High-power, diffraction-limited organic solid-state laser operation has been achieved in a vertical external cavity surface-emitting organic laser (VECSOL), pumped by a low-cost compact blue laser diode. The diode-pumped VECSOLs were demonstrated with various dyes in a polymer matrix, leading to laser emissions from 540 nm to 660 nm. Optimization of both the pump pulse duration and output coupling leads to a pump slope efficiency of 11% for a DCM based VECSOLs. We report output pulse energy up to 280 nJ with 100 ns long pump pulses, leading to a peak power of 3.5 W in a circularly symmetric, diffraction-limited beam.

  1. Designing and optimizing highly efficient grating for high-brightness laser based on spectral beam combining

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Ying-Ying, E-mail: xclin@semi.ac.cn, E-mail: yangyy@semi.ac.cn; Zhao, Ya-Ping; Wang, Li-Rong; Zhang, Ling; Lin, Xue-Chun, E-mail: xclin@semi.ac.cn, E-mail: yangyy@semi.ac.cn [Laboratory of All Solid State Light Sources, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083 (China)

    2015-03-14

    A highly efficient nano-periodical grating is theoretically investigated for spectral beam combining (SBC) and is experimentally implemented for attaining high-brightness laser from a diode laser array. The rigorous coupled-wave analysis with the S matrix method is employed to optimize the parameters of the grating. According the optimized parameters, the grating is fabricated and plays a key role in SBC cavity. The diffraction efficiency of this grating is optimized to 95% for the output laser which is emitted from the diode laser array. The beam parameter product of 3.8 mm mrad of the diode laser array after SBC is achieved at the output power of 46.3 W. The optical-to-optical efficiency of SBC cavity is measured to be 93.5% at the maximum operating current in the experiment.

  2. Structural analysis of the bright monomeric yellow-green fluorescent protein mNeonGreen obtained by directed evolution.

    Science.gov (United States)

    Clavel, Damien; Gotthard, Guillaume; von Stetten, David; De Sanctis, Daniele; Pasquier, Hélène; Lambert, Gerard G; Shaner, Nathan C; Royant, Antoine

    2016-12-01

    Until recently, genes coding for homologues of the autofluorescent protein GFP had only been identified in marine organisms from the phyla Cnidaria and Arthropoda. New fluorescent-protein genes have now been found in the phylum Chordata, coding for particularly bright oligomeric fluorescent proteins such as the tetrameric yellow fluorescent protein lanYFP from Branchiostoma lanceolatum. A successful monomerization attempt led to the development of the bright yellow-green fluorescent protein mNeonGreen. The structures of lanYFP and mNeonGreen have been determined and compared in order to rationalize the directed evolution process leading from a bright, tetrameric to a still bright, monomeric fluorescent protein. An unusual discolouration of crystals of mNeonGreen was observed after X-ray data collection, which was investigated using a combination of X-ray crystallography and UV-visible absorption and Raman spectroscopies, revealing the effects of specific radiation damage in the chromophore cavity. It is shown that X-rays rapidly lead to the protonation of the phenolate O atom of the chromophore and to the loss of its planarity at the methylene bridge.

  3. High-brightness beamline for x-ray spectroscopy at the ALS

    Energy Technology Data Exchange (ETDEWEB)

    Perera, R.C.C.; Jones, G. [Ernest Orlando Lawrence Berkeley National Lab., CA (United States); Lindle, D.W. [Univ. of Nevada, Las Vegas, NV (United States)

    1997-04-01

    Beamline 9.3.1 at the Advanced Light Source (ALS) is a windowless beamline, covering the 1-6 keV photon-energy range, designed to achieve the goals of high energy resolution, high flux, and high brightness at the sample. When completed later this year, it will be the first ALS monochromatic hard x-ray beamline, and its brightness will be an order of magnitude higher than presently available in this energy range. In addition, it will provide flux and resolution comparable to any other beamline now in operation. To achieve these goals, two technical improvements, relative to existing x-ray beamlines, were incorporated. First, a somewhat novel optical design for x-rays, in which matched toroidal mirrors are positioned before and after the double-crystal monochromator, was adopted. This configuration allows for high resolution by passing a collimated beam through the monochromator, and for high brightness by focusing the ALS source on the sample with unit magnification. Second, a new {open_quotes}Cowan type{close_quotes} double-crystal monochromator based on the design used at NSLS beamline X-24A was developed. The measured mechanical precision of this new monochromator shows significant improvement over existing designs, without using positional feedback available with piezoelectric devices. Such precision is essential because of the high brightness of the radiation and the long distance (12 m) from the source (sample) to the collimating (focusing) mirror. This combination of features will provide a bright, high resolution, and stable x-ray beam for use in the x-ray spectroscopy program at the ALS.

  4. Low environmental impact bleaching sequences for attaining high brightness level with eucalyptus SPP pulp

    Directory of Open Access Journals (Sweden)

    M. M. Costa

    2009-03-01

    Full Text Available The alternatives used for minimizing the usage of chlorine dioxide in bleaching sequences included a hot acid hydrolysis (Ahot stage, the use of hot chlorine dioxide (Dhot and ozone stages at medium consistency and high consistency (Zmc and Zhc, in addition to stages with atmospheric hydrogen peroxide (P and pressurized hydrogen peroxide (PO. The results were interpreted based on the cost of the chemical products, bleaching process yields and on minimizing the environmental impact of the bleaching process. In spite of some process restrictions, high ISO brightness levels were kept around 90 % brightness. Additionally, the inclusion of stages like acid hydrolysis, pressurized peroxide and ozone in the bleaching sequences provided an increase in operating flexibility, aimed at reducing environmental impact (ECF Light. The Dhot(EOPD(PO sequence presented lower operating cost for ISO brightness above 92 %. However, this kind of sequence was not allowed for closing the wastewater circuit, even partially. For ISO brightness level around 91%, the AhotZhcDP sequence presented a lower operating cost than the others.

  5. Microwave brightness temperature and thermal inertia - towards synergistic method of high-resolution soil moisture retrieval

    Science.gov (United States)

    Lukowski, Mateusz; Usowicz, Boguslaw; Sagan, Joanna; Szlazak, Radoslaw; Gluba, Lukasz; Rojek, Edyta

    2017-04-01

    Soil moisture is an important parameter in many environmental studies, as it influences the exchange of water and energy at the interface between the land surface and the atmosphere. Accurate assessment of the soil moisture spatial and temporal variations is crucial for numerous studies; starting from a small scale of single field, then catchment, mesoscale basin, ocean conglomeration, finally ending at the global water cycle. Despite numerous advantages, such as fine accuracy (undisturbed by clouds or daytime conditions) and good temporal resolution, passive microwave remote sensing of soil moisture, e.g. SMOS and SMAP, are not applicable to a small scale - simply because of too coarse spatial resolution. On the contrary, thermal infrared-based methods of soil moisture retrieval have a good spatial resolution, but are often disturbed by clouds and vegetation interferences or night effects. The methods that base on point measurements, collected in situ by monitoring stations or during field campaigns, are sometimes called "ground truth" and may serve as a reference for remote sensing, of course after some up-scaling and approximation procedures that are, unfortunately, potential source of error. Presented research concern attempt to synergistic approach that join two remote sensing methods: passive microwave and thermal infrared, supported by in situ measurements. Microwave brightness temperature of soil was measured by ELBARA, the radiometer at 1.4 GHz frequency, installed at 6 meters high tower at Bubnow test site in Poland. Thermal inertia around the tower was modelled using the statistical-physical model whose inputs were: soil physical properties, its water content, albedo and surface temperatures measured by an infrared pyrometer, directed at the same footprint as ELBARA. The results coming from this method were compared to in situ data obtained during several field campaigns and by the stationary agrometeorological stations. The approach seems to be

  6. An Increasing Stellar Baryon Fraction in Bright Galaxies at High Redshift

    CERN Document Server

    Finkelstein, Steven L; Behroozi, Peter; Somerville, Rachel S; Papovich, Casey; Milosavljevic, Milos; Dekel, Avishai; Narayanan, Desika; Ashby, Matthew L N; Cooray, Asantha; Fazio, Giovanni G; Ferguson, Henry C; Koekemoer, Anton M; Salmon, Brett W; Willner, S P

    2015-01-01

    Recent observations have shown that the characteristic luminosity of the rest-frame ultraviolet (UV) luminosity function does not significantly evolve at 4 < z < 7 and is approximately M*_UV ~ -21. We investigate this apparent non-evolution by examining a sample of 190 bright, M_UV < -21 galaxies at z=4 to 7, analyzing their stellar populations and host halo masses. Including deep Spitzer/IRAC imaging to constrain the rest-frame optical light, we find that M*_UV galaxies at z=4-7 have similar stellar masses of log(M/Msol)=9.8-9.9 and are thus relatively massive for these high redshifts. However, bright galaxies at z=4-7 are less massive and have younger inferred ages than similarly bright galaxies at z=2-3, even though the two populations have similar star formation rates and levels of dust attenuation. We match the abundances of these bright z=4-7 galaxies to halo mass functions from the Bolshoi Lambda-CDM simulation to estimate the halo masses. We find that the typical halo masses in ~M*_UV galaxie...

  7. A novel high-brightness broadband light-source technology from the VUV to the IR

    Science.gov (United States)

    Horne, Stephen; Smith, Don; Besen, Matthew; Partlow, Matthew; Stolyarov, Daniil; Zhu, Huiling; Holber, William

    2010-04-01

    A novel technology has been developed which enables high-brightness, broadband light output from the VUV to the IR spectral regions. A focused laser is used to sustain a high-pressure xenon discharge inside a bulb, creating a smaller, hotter discharge than can be obtained by using an electrically-driven discharge. This allows for continuous output down to 120 nm wavelength and into the infrared. Application areas include hyperspectral imaging, standoff detection, surveillance, bioanalytical instrumentation, microscopy, and materials studies. Laser-driven optical discharges were first investigated over 30 years ago, providing the initial technical understanding of such discharges. However it took the convergence of two separate elements - the availability of low-cost, high-efficiency CW diode lasers; and a market need for high-brightness, broadband light source - to provide the impetus for further development in this area. Using near-IR CW diode lasers at power levels from 15 W to over 2000 W, we have generated high-pressure xenon discharges having temperatures as high as 10,000 C. The optical brightness of these discharges can be over an order of magnitude higher than those obtainable from the brightest xenon arc lamps, and can be several orders of magnitude brighter than deuterium lamps. Results from modeling of these discharges as well as experimental measurements will be presented.

  8. Bright hybrid white light-emitting quantum dot device with direct charge injection into quantum dot

    Science.gov (United States)

    Cao, Jin; Xie, Jing-Wei; Wei, Xiang; Zhou, Jie; Chen, Chao-Ping; Wang, Zi-Xing; Jhun, Chulgyu

    2016-12-01

    A bright white quantum dot light-emitting device (white-QLED) with 4-[4-(1-phenyl-1H-benzo[d]imidazol-2-yl)phenyl]-2- [3-(tri-phenylen-2-yl)phen-3-yl]quinazoline deposited on a thin film of mixed green/red-QDs as a bilayer emitter is fabricated. The optimized white-QLED exhibits a turn-on voltage of 3.2 V and a maximum brightness of 3660 cd/m2@8 V with the Commission Internationale de l’Eclairage (CIE) chromaticity in the region of white light. The ultra-thin layer of QDs is proved to be critical for the white light generation in the devices. Excitation mechanism in the white-QLEDs is investigated by the detailed analyses of electroluminescence (EL) spectral and the fluorescence lifetime of QDs. The results show that charge injection is a dominant mechanism of excitation in the white-QLED. Project supported by the National Natural Science Foundation of China (Grant No. 21302122) and the Science and Technology Commission of Shanghai Municipality, China (Grant No. 13ZR1416600).

  9. High brightness, high current injector design for the ATF upgrade at Brookhaven National Laboratory

    Science.gov (United States)

    Stratakis, Diktys

    2015-04-01

    Brookhaven National Accelerator Test Facility (BNL ATF) is in the process of moving to a new place and upgrading its major capabilities: The electron beam energy and CO2 laser power. Specifically, the maximum electron beam energy will be first projected to 100-150 MeV and then upgraded to 500 MeV while at the same time the laser power will increase 100 fold, thus making the new ATF a powerful tool in advanced accelerator concept research. The bright electron bunch produced by the new state-of-the-art photocathode rf gun will be accelerated and optionally delivered to multiple beamlines. The injector is a key element of this accelerator upgrade. It must deliver a high average current beam with very small transverse and longitudinal emittances, at a sufficiently high energy that space charge effects are under control. We review here the detailed injector design and present first results from beam dynamics simulations. We give emphasis in the production of compressed flat beams which have important applications in novel light-source concepts and could possibly alleviate the need for damping rings in lepton colliders. We present a theoretical model and with the aid of simulation examine the influence of space charge, bunch compression and suggest a operating regime with minimal phase space dilutions.

  10. High brightness gamma-ray production at Fermilab Accelerator Science and Technology (FAST) facility

    Science.gov (United States)

    Mihalcea, D.; Jacobson, B.; Murokh, A.; Piot, P.; Ruan, J.

    2017-03-01

    Electron beams with energies of the order of a few 100's of MeV and low transverse emittance, in combination with powerful infrared lasers, allow for the production of high quality gamma rays through Inverse Compton Scattering (ICS). At Fermilab Accelerator Science and Technology (FAST) facility, a 300 MeV beam will be used to generate gamma rays with maximum photon energies of up to ˜1.5 MeV and brightness of the order of 1021 photons/[s-(mm-mrad)2- 0.1%BW]. Due to the low electron-beam transverse emittance, the relative bandwidth of the scattered radiation is expected to be ≤ 1%. A key challenge toward the production of high radiation dose and brightness is to enhance the energy of the infrared 3 ps laser pulses to the joule level. In this contribution, we present the plans for the experimental setup, along with comprehensive numerical simulations of the ICS process.

  11. Initial observations of high-charge, low-emittance electron beams at HIBAF (High Brightness Accelerator FEL)

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Feldman, R.B.; Carsten, B.E.; Feldman, D.W.; Sheffield, R.L.; Stein, W.E.; Johnson, W.J.; Thode, L.E.; Bender, S.C.; Busch, G.E.

    1990-01-01

    We report our initial measurements of bright (high-charge, low-emittance) electron beams generated at the Los Alamos High Brightness Accelerator FEL (HIBAF) Facility. Normalized emittance values of less than 50 {pi} mm-mrad for charges ranging from 0.7 to 8.7 nC were obtained for single micropulses at a y-waist and at an energy of 14.7 MeV. These measurements were part of the commissioning campaign on the HIBAF photoelectric injector. Macropulse measurements have also been performed and are compared with PARMELA simulations. 5 refs., 8 figs., 3 tabs.

  12. 3C 286: a bright, compact, stable, and highly polarized calibrator for millimeter-wavelength observations

    CERN Document Server

    Agudo, Ivan; Wiesemeyer, Helmut; Molina, Sol N; Casadio, Carolina; Gomez, Jose L; Emmanoulopoulos, Dimitrios

    2012-01-01

    Context. A number of millimeter and submillimeter facilities with linear polarization observing capabilities have started operating during last years. These facilities, as well as other previous millimeter telescopes and interferometers, require bright and stable linear polarization calibrators to calibrate new instruments and to monitor their instrumental polarization. The current limited number of adequate calibrators implies difficulties in the acquisition of these calibration observations. Aims. Looking for additional linear polarization calibrators in the millimeter spectral range, in mid-2006 we started monitoring 3C 286, a standard and highly stable polarization calibrator for radio observations. Methods. Here we present the 3 and 1mm monitoring observations obtained between September 2006 and October 2011 with the XPOL polarimeter on the IRAM 30m Millimeter Telescope. Results. Our observations show that 3C 286 is a bright source of constant total flux with 3mm flux density S_3mm = (0.90 \\pm 0.02) Jy. ...

  13. Femtosecond laser pumped by high-brightness coherent polarization locked diodes.

    Science.gov (United States)

    Purnawirman; Phua, P B

    2011-08-01

    We demonstrate, for the first time to our knowledge, the use of a coherent polarization locked diode as the high-brightness pump source for a femtosecond laser. Four diode emitters are coherently locked to produce more than 5 W linearly polarized, narrow linewidth, and single-lobed pump beam. This gives >10× brightness improvement over the conventional diode array. The diode beam is then used to pump a Yb:KYW laser to obtain 2 W output with 57% slope efficiency in cw laser operation. By using a saturable absorber mirror, we achieved cw mode-locking operation with a 177 fs pulse width at an average power of 0.55 W.

  14. A Multi-Wavelength Study of the High Surface Brightness Hotspot in PKS1421-490

    CERN Document Server

    Godfrey, L E H; Lovell, J E J; Jauncey, D L; Gelbord, J; Schwartz, D A; Marshall, H L; Birkinshaw, M; Georganopoulos, M; Murphy, D W; Perlman, E S; Worrall, D M

    2009-01-01

    Long Baseline Array imaging of the z=0.663 broad line radio galaxy PKS1421-490 reveals a 400 pc diameter high surface brightness hotspot at a projected distance of approximately 40kpc from the active galactic nucleus. The isotropic X-ray luminosity of the hotspot, L_{2-10 keV} = 3 10^{44} ergs/s, is comparable to the isotropic X-ray luminosity of the entire X-ray jet of PKS0637-752, and the peak radio surface brightness is hundreds of times greater than that of the brightest hotspot in Cygnus A. We model the radio to X-ray spectral energy distribution using a one-zone synchrotron self Compton model with a near equipartition magnetic field strength of 3 mG. There is a strong brightness asymmetry between the approaching and receding hotspots and the hot spot spectrum remains flat (alpha ~ 0.5) well beyond the predicted cooling break for a 3 mG magnetic field, indicating that the hotspot emission may be Doppler beamed. A high plasma velocity beyond the terminal jet shock could be the result of a dynamically impo...

  15. Development of a High- Brightness, Quasi- Monoenergetic Neutron Source at LLNL for Nuclear Physics Applications

    Science.gov (United States)

    Johnson, M. S.; Anderson, S. G.; Bleuel, D.; Fitsos, P. J.; Gibson, D.; Hall, J. M.; Marsh, R.; Rusnak, B.

    2016-09-01

    Lawrence Livermore National Laboratory is developing a high-brightness, quasi-monoenergetic neutron source. The intensity of the neutron source is expected to be 1011 n/s/sr with energies between 7 MeV and 10 MeV at 5% bandwidth at 0-degrees. This energy region is important for the study of neutron-induced reactions, nuclear astrophysics, and nuclear structure. For example, for neutrons between 1 and 10 MeV, the capturing states are below the GDR in many nuclei and the dominant reactions are compound and direct capture. The intensity and energy selection of the source makes it appealing for measurements of sparse targets at specific energies. We will present an array of nuclear physics measurements that will benefit from this source. The source is also of interest to generating activated targets for decay-out studies or for target production for other reaction-based measurements, e.g. fusion-evaporation reactions. Other usage examples include practical applications for imaging of very dense objects such as machine parts. For this presentation, we will discuss our method to use (d,n) production reaction on deuterium in a windowless gas target system. This approach is required because of the large power of the 7 MeV, 300 μA deuteron beams. We will discuss our facility and its capabilities. This work performed under the auspices of the U.S. Department of Energy by Lawrence Livermore National Laboratory under Contract DE-AC52-07NA27344.

  16. Phenomena Elucidation of High Brightness Fiber Laser Welding of Stainless Steel

    Science.gov (United States)

    Kawahito, Yousuke; Mizutani, Masami; Katayama, Seiji

    A high-brigthness fiber laser can produce an ultra-high peak power density of MW/mm2 level corresponding to a focused electron beam, and is promising as one of the desirable heat sources for deep-penetration welding. The objectives of this research are to elucidate the factors affecting weld penetration and defects formation mechanisms, to obtain a fundamental knowledge of interaction between a fiber laser beam and the laser-induced plume, and to assess laser absorption with water-calorimetric method in bead-on-plate welding of Type 304 austenitic stainless steel plates with a 10 kW fiber laser beam. Concerning the weldablity and defects, the penetration depth reached 18 mm at the maximum. At 50 mm/s or lower welding speeds, porosity was generated under the conventionally-focused and tightly-focused conditions. X-ray transmission in-site observation images demonstrated that pores were formed not only at the tip of the keyhole but also near the upper part. The keyhole behavior was stabilized by using nitrogen shielding gas, which led to the porosity prevention. As for the interaction under the normal Ar shielding gas conditions, the temperature and ionization degree of the laser-induced plumes were calculated to be 6,000 K and 0.02, respectively, by the Bolzman plots and Saha's equation. It was also found that the attenuation and the refraction between the 10-kW fiber laser beam and the short weakly-ionized plume were too small to exert the reduction in weld penetration. The laser absorption of the stainless steel plate was approximately 85 % high at 10 kW laser power and 50 mm/s welding speed. Compared X-ray transmission observation images of the keyhole with the focusing feature of the fiber laser beam, most of the incident laser passed through the keyhole inlet, and the center part of the beam was delivered directly to the tip of the deep keyhole. Consequently, as far as the adquate welding procedures were utilized on the basis of eclucidation of the welding

  17. Unexpected High Brightness Temperature 140 PC from the Core in the Jet of 3C 120

    CERN Document Server

    Roca-Sogorb, Mar; Agudo, Ivan; Marscher, Alan P; Jorstad, Svetlana G

    2009-01-01

    We present 1.7, 5, 15, 22 and 43 GHz polarimetric multi--epoch VLBA observations of the radio galaxy 3C 120. The higher frequency observations reveal a new component, not visible before April 2007, located 80 mas from the core (which corresponds to a deprojected distance of 140 pc), with a brightness temperature about 600 times higher than expected at such distances. This component (hereafter C80) is observed to remain stationary and to undergo small changes in its brightness temperature during more than two years of observations. A combination of jet bending, significant flow acceleration, and a very strong shock --for such large distance from the core-- may explain the unusually high Tb of C80, but it seems very unlikely that this corresponds to the usual shock that emerges from the core and travels downstream to the location of C80. It appears that some other intrinsic process in the jet, capable of providing a local burst in particle and/or magnetic field energy, may be responsible for the enhanced bright...

  18. Effects of high-order dispersions on dark-bright vector soliton propagation and interaction

    Institute of Scientific and Technical Information of China (English)

    Hong Li; Dongning Wang

    2011-01-01

    The dynamics of dark-bright vector solitons is investigated in a birefringent fiber with the high-order dispersions, and their effects on vector soliton propagation and interaction are analyzed using the numerical method. The combined role of the high-order dispersions, such as the third-order dispersion (TOD) and the fourth-order dispersion (FOD), may cause various deformation of the vector soliton and enhance interaction. These effects depend strictly on the sign of the high-order dispersions. Results indicate that the disadvantageous effects can be reduced effectively via proper mapping of the high-order dispersions.%@@ The dynamics of dark-bright vector solitons is investigated in a birefringent fiber with the high-order dispersions, and their effects on vector soliton propagation and interaction are analyzed using the numerical method.The combined role of the high-order dispersions, such as the third-order dispersion (TOD) and the fourth-order dispersion (FOD), may cause various deformation of the vector soliton and enhance interaction.These effects depend strictly on the sign of the high-order dispersions.Results indicate that the disadvantageous effects can be reduced effectively via proper mapping of the high-order dispersions.

  19. New high-brightness monochrome monitor based on color CRT technology

    Science.gov (United States)

    Spekowius, Gerhard; Weibrecht, Martin; D'Adda, Carlo; Antonini, Antonio; Casale, Carlo; Blume, Hartwig R.

    1997-05-01

    With increasing availability of medical image communication infrastructures, medical images are more and more displayed as soft-copies rather than as hard-copies. Often however, the image viewing environment is characterized by high ambient light, such as in surgery rooms or offices illuminated by daylight. We are describing a very-high- brightness cathode-ray-tube (CRT) monitor which accommodates these viewing conditions without the typical deterioration in resolution due to electron focal spot blooming. The three guns of a standard color CRT are used to create a high brightness monochrome monitor. The CRT has no shadow-mask, and a homogeneous P45 phosphor layer has been deposited instead of the structured red-green-blue color phosphor screen. The electron spots of the three guns are dynamically matched by applying appropriate waveforms to four additional multiple magnetic fields around the gun assembly. We evaluated the image quality of the triple-gun CRT monitor concerning parameters which are especially relevant for medical imaging applications. We have measured characteristic curves, dynamic range, veiling glare, resolution, spot profiles, and screen noise. The monitor can provide a high luminance of more than 200 fL. Due to nearly perfect matching of the three spots, the resolution is mainly determined by the beam profile of a single gun and is remarkably high even at these high luminance values. The P45 phosphor shows very little structure noise, which is an advantage for medical desktop applications. Since all relevant monitor parameters are digitally controlled, the status of the monitor can be fully characterized at any time. This feature particularly facilitates the reproduction of brightness and contrast values and hence allows easy implementation of a display function standard or to return to a desired display function that has been found useful for a given application in the past.

  20. Advanced high brightness ion rf accelerator applications in the nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, R.A.

    1991-01-01

    The capability of modern rf linear accelerators to provide intense high quality beams of protons, deuterons, or heavier ions is opening new possibilities for transmuting existing nuclear wastes, for generating electricity from readily available fuels with minimal residual wastes, for building intense neutron sources for materials research, for inertial confinement fusion using heavy ions, and for other new applications. These are briefly described, couched in a perspective of the advances in the understanding of the high brightness beams that has enabled these new programs. 32 refs., 2 figs.

  1. Generation of bright circularly-polarized extreme ultraviolet high harmonics for magnetic circular dichroism spectroscopy

    CERN Document Server

    Kfir, Ofer; Turgut, Emrah; Knut, Ronny; Zusin, Dmitriy; Popmintchev, Dimitar; Popmintchev, Tenio; Nembach, Hans; Shaw, Justin M; Fleicher, Avner; Kapteyn, Henry; Murnane, Margaret; Cohen, Oren

    2014-01-01

    Circularly-polarized extreme UV and X-ray radiation provides valuable access to the structural, electronic and magnetic properties of materials. To date, such experiments have been possible only using large-scale free-electron lasers or synchrotrons. Here we demonstrate the first bright extreme UV circularly-polarized high harmonics and use this new light source for magnetic circular dichroism measurements at the M-shell absorption edges of cobalt. This work paves the way towards element-specific imaging and spectroscopy of multiple elements simultaneously in magnetic and other chiral media with very high spatio-temporal resolution, all on a tabletop.

  2. High-Ti, bright-CL rims in volcanic quartz: a result of very rapid growth

    Science.gov (United States)

    Pamukcu, Ayla S.; Ghiorso, Mark S.; Gualda, Guilherme A. R.

    2016-12-01

    Volcanic quartz commonly contains Ti-enriched zones and CO2-enriched melt inclusions, and crystallization temperatures and pressures derived from Ti-in-quartz geothermobarometry and H2O-CO2 glass geobarometry applied to these compositions are typically high. Consequently, these features are generally interpreted to represent high temperatures and/or pressures. Yet, growth rate estimates from some high-Ti/bright-CL quartz rims suggest they grew at rates orders of magnitude faster than did cores and interiors of the crystals. This observation is notable in light of studies that suggest that fast crystal growth rates can produce a boundary layer in the melt surrounding a growing crystal that is enriched in components that diffuse comparatively slowly in the melt. In these circumstances, the composition of zones or melt inclusions formed from such a boundary layer melt will not accurately represent that of the far-field melt, and temperatures and pressures estimated from these compositions will be anomalous. We use a numerical model based on the coupled growth-diffusion equation of Lasaga (1982) to assess the effect of growth rate on the production of high-Ti/bright-CL zones and high-CO2 melt inclusions in quartz in rhyolitic melts. Simulations span a wide range of growth rates (10-7 to 10-13 m/s) and timescales (1 minute-1 year), and results suggest that quartz growth at 10-10 m/s or faster can produce a boundary layer enriched in these components. This suggests that appropriate application of Ti-in-quartz and H2O-CO2 glass geothermobarometry is contingent upon the verification that the compositions used are not those of boundary layer melts. Applying our model to the Bishop Tuff, which contains quartz displaying high-Ti/bright-CL rims and high-CO2 rim-hosted melt inclusions, we find that growth rates of 10-7 to 10-9 m/s can produce the observed enrichments in these components over the timescales estimated for the growth of the rims (days-weeks); these growth rates

  3. Generation of a high-brightness pulsed positron beam for the Munich scanning positron microscope

    Energy Technology Data Exchange (ETDEWEB)

    Piochacz, Christian

    2009-11-20

    Within the present work the prerequisites for the operation of the Munich scanning positron microscope (SPM) at the high intense neutron induced positron source Munich (NEPOMUC) were established. This was accomplished in two steps: Firstly, a re-moderation device was installed at the positron beam facility NEPOMUC, which enhances the brightness of the positron beam for all connected experiments. The second step was the design, set up and initial operation of the SPM interface for the high efficient conversion of the continuous beam into a bunched beam. The in-pile positron source NEPOMUC creates a positron beam with a diameter of typically 7 mm, a kinetic energy of 1 keV and an energy spread of 50 eV. The NEPOMUC re-moderator generates from this beam a low energy positron beam (20 - 200 eV) with a diameter of less than 2 mm and an energy spread well below 2.5 eV. This was achieved with an excellent total efficiency of 6.55{+-}0.25 %. The re-moderator was not only the rst step to implement the SPM at NEPOMUc, it enables also the operation of the pulsed low energy positron beam system (PLEPS). Within the present work, at this spectrometer rst positron lifetime measurements were performed, which revealed the defect types of an ion irradiated uranium molybdenum alloy. Moreover, the instruments which were already connected to the positron beam facility bene ts considerably of the high brightness enhancement. In the new SPM interface an additional re-moderation stage enhances the brightness of the beam even more and will enable positron lifetime measurements at the SPM with a lateral resolution below 1 {mu}m. The efficiency of the re-moderation process in this second stage was 24.5{+-}4.5 %. In order to convert high efficiently the continuous positron beam into a pulsed beam with a repetition rate of 50 MHz and a pulse duration of less than 50 ps, a sub-harmonic pre-bucher was combined with two sine wave bunchers. Furthermore, the additional re-moderation stage of the

  4. High brightness beam shaping and fiber coupling of laser-diode bars.

    Science.gov (United States)

    Yu, Junhong; Guo, Linui; Wu, Hualing; Wang, Zhao; Tan, Hao; Gao, Songxin; Wu, Deyong; Zhang, Kai

    2015-04-10

    The strong beam quality mismatch in the fast and slow axes of laser-diode bars requires a significant beam shaping method to reach the parameters needed for fiber coupling. An effective solution to this problem is proposed that is based on a right-angle prism array and a distributed cylinder-lens stack. Coupling 12 mini-bars into a standard 100 μm core diameter and 0.15 numerical aperture fiber is achieved, and the output power can reach 400 W. Using this technique, production of compact and high brightness fiber-coupled laser-diode modules is possible.

  5. Growth of highly bright-white silica nanowires as diffusive reflection coating in LED lighting.

    Science.gov (United States)

    Xi, Shuang; Shi, Tielin; Zhang, Lei; Liu, Dan; Lai, Wuxing; Tang, Zirong

    2011-12-19

    Large quantities of silica nanowires were synthesized through thermal treatment of silicon wafer in the atmosphere of N(2)/H(2)(5%) under 1200 °C with Cu as catalyst. These nanowires grew to form a natural bright-white mat, which showed highly diffusive reflectivity over the UV-visible range, with more than 60% at the whole range and up to 88% at 350 nm. The utilization of silica nanowires in diffusive coating on the reflector cup of LED is demonstrated, which shows greatly improved light distribution comparing with the specular reflector cup. It is expected that these nanowires can be promising coating material for optoelectronic applications.

  6. Report of the working group on production and dynamics of high brightness beams

    Energy Technology Data Exchange (ETDEWEB)

    Sheffield, R.L. [MS H851I, Los Alamos National Laboratory, Los Alamos, New Mexico 87545 (United States); Bisognano, J.; Brau, C.; Hogan, M.; Kim, K.; Milton, S.; Nuhn, H.; Pagani, C.; Pierini, P.; Reiser, M.; Schmerge, J.; Serafini, L.; Teng, L.; Winick, H.; Cornacchia, M.

    1997-02-01

    This paper summarizes the main discussions of the Working Group on the Production and Dynamics of High Brightness Beams. The following topics are covered in this paper: proposed new electron sources and needed research on existing sources, discussions on issues relating to the description of phase space on non-thermalized electron beam distributions and the theoretical modeling on non-thermalized electron beam distributions, and the present status of the theoretical modeling of beam transport in bends. {copyright} {ital 1997 American Institute of Physics.}

  7. First results from the high-brightness x-ray spectroscopy beamline at ALS

    Energy Technology Data Exchange (ETDEWEB)

    Perera, R.C.C.; Ng, W.; Jones, G. [Lawrence Berkeley National Lab., CA (United States)] [and others

    1997-04-01

    Beamline 9.3.1 at the Advanced Light Source (ALS) is a windowless beamline, covering the 1-6 keV photon-energy range, designed to achieve the goal of high brightness at the sample for use in the X-ray Atomic and Molecular Spectroscopy (XAMS) science, surface and interface science, biology and x-ray optical development programs at ALS. X-ray absorption and time of flight photo emission measurements in 2 - 5 keV photon energy in argon along with the flux, resolution, spot size and stability of the beamline will be discussed. Prospects for future XAMS measurements will also be presented.

  8. Beam emittance investigation in high brightness injector using different driver laser profiles

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    Beam emittance plays an important role in any accelerator, and it is a main parameter to judge the performance of an accelerator. Emittance optimization is an indispensable part in conditioning and operation of the facility. For a laser-driven high brightness injector, different time structure of the laser pulse has different effects on transverse emittance. In order to compare Gaussian and flat-top laser pulse, systematic simulations of 500 pC have been done. From the simulation results, one can see that flat-top pulse laser will yield smaller minimal transverse beam size and transverse beam emittance than Gaussian pulse laser.

  9. Neutron Spectral Brightness of Cold Guide 4 at the High Flux Isotope Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Winn, B L; Robertson, J L; Iverson, E B; Selby, D L, E-mail: winnbl@ornl.gov

    2010-11-01

    The High Flux Isotope Reactor resumed operation in June of 2007 with a supercritical hydrogen cold source in horizontal beam tube 4. Cold guide 4 is a guide system designed to deliver neutrons from this source with a reasonable flux at wavelengths greater than 4 A to several instruments, and includes a 15-m, 96-section, 4-channel bender. A time-of-flight spectrum with calibrated detector was recorded at port C of cold guide 4, and compared to McStas simulations, to generate a brightness spectrum.

  10. Neutron Spectral Brightness of Cold Guide 4 at the High Flux Isotope Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Winn, B. L. [Brookhaven National Lab. (BNL), Upton, NY (United States). Neutron Scattering Group; Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Neutron Facilities Development Div.; Robertson, J. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Neutron Facilities Development Div.; Iverson, Erik B. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Neutron Facilities Development Div.; Selby, D. L. [Oak Ridge National Lab. (ORNL), Oak Ridge, TN (United States). Neutron Facilities Development Div.

    2009-05-03

    The High Flux Isotope Reactor resumed operation in June of 2007 with a super-critical hydrogen cold source in horizontal beam tube 4. Cold guide 4 is a guide system designed to deliver neutrons from this source at reasonable flux at wavelengths greater than 4 Å to several instruments, and includes a 15-m, 96-section, 4-channel bender. A time-of-flight spectrum with calibrated detector was recorded at port C of cold guide 4, and compared to McStas simulations, to generate a brightness spectrum.

  11. Neutron Spectral Brightness of Cold Guide 4 at the High Flux Isotope Reactor

    Science.gov (United States)

    Winn, B. L.; Robertson, J. L.; Iverson, E. B.; Selby, D. L.

    2010-11-01

    The High Flux Isotope Reactor resumed operation in June of 2007 with a supercritical hydrogen cold source in horizontal beam tube 4. Cold guide 4 is a guide system designed to deliver neutrons from this source with a reasonable flux at wavelengths greater than 4 Å to several instruments, and includes a 15-m, 96-section, 4-channel bender. A time-of-flight spectrum with calibrated detector was recorded at port C of cold guide 4, and compared to McStas simulations, to generate a brightness spectrum.

  12. Graded Heterojunction of AlGaInP High-brightness Light Emitting Diodes

    Institute of Scientific and Technical Information of China (English)

    LIU Lu; FAN Guang-han; LIAO Chang-jun

    2004-01-01

    A simple model of the graded heterojunction in AlGaInP compound semiconductors was introduced to analyze the band profile. The band profiles are analyzed with the different grading ways but the same grading length and under the different doping densities. The effect of the different grading lengths on the surplus of the potential of the spike to the potential of N region are also analyzed under the different doping densities.Through the experiments,it proves that the performances of high brightness light emitting diodes can be improved by the effects of the graded heterojunction.

  13. InGaN micro-LED-pillar as the building block for high brightness emitters

    KAUST Repository

    Shen, Chao

    2013-01-01

    In summary, we confirmed the improved electrical and optical characteristics, with reduced efficiency droop in InGaN μLED-pillars when these devices were scaled down in size. We demonstrated that strain relief contributed to further improvement in EQE characteristics in small InGaN μLED-pillars (D < 50 μm), apart from the current spreading effect. The μLED-pillar can be deployed as the building block for large effective-area, high brightness emitter. © 2013 IEEE.

  14. Single-crystal phosphors for high-brightness white LEDs/LDs

    Science.gov (United States)

    Víllora, Encarnación G.; Arjoca, Stelian; Inomata, Daisuke; Shimamura, Kiyoshi

    2016-03-01

    White light-emitting diodes (wLEDs) are the new environmental friendly sources for general lighting purposes. For applications requiring a high-brightness, current wLEDs present overheating problems, which drastically decrease their emission efficiency, color quality and lifetime. This work gives an overview of the recent investigations on single-crystal phosphors (SCPs), which are proposed as novel alternative to conventional ceramic powder phosphors (CPPs). This totally new approach takes advantage of the superior properties of single-crystals in comparison with ceramic materials. SCPs exhibit an outstanding conversion efficiency and thermal stability up to 300°C. Furthermore, compared with encapsulated CPPs, SCPs possess a superior thermal conductivity, so that generated heat can be released efficiently. The conjunction of all these characteristics results in a low temperature rise of SCPs even under high blue irradiances, where conventional CPPs are overheated or even burned. Therefore, SCPs represent the ideal, long-demanded all-inorganic phosphors for high-brightness white light sources, especially those involving the use of high-density laser-diode beams.

  15. Droplet-based, high-brightness extreme ultraviolet laser plasma source for metrology

    Science.gov (United States)

    Vinokhodov, A. Yu.; Krivokorytov, M. S.; Sidelnikov, Yu. V.; Krivtsun, V. M.; Medvedev, V. V.; Koshelev, K. N.

    2016-10-01

    We report on the development of a high brightness source of extreme ultraviolet radiation (EUV) with a working wavelength of 13.5 nm. The source is based on a laser-produced plasma driven by pulsed radiation of a Nd:YAG laser system. Liquid droplets of Sn-In eutectic alloy were used as the source fuel. The droplets were created by a droplet generator operating in the jet break-up regime. The EUV emission properties of the plasma, including the emission spectrum, time profile, and conversion efficiency of laser radiation into useful 13.5 nm photons, have been characterized. Using the shadowgraphy technique, we demonstrated the production of corpuscular debris by the plasma source and the influence of the plasma on the neighboring droplet targets. The high-frequency laser operation was simulated by usage of the dual pulse regime. Based on the experimental results, we discuss the physical phenomena that could affect the source operation at high repetition rates. Finally, we estimate that an average source brightness of 1.2 kW/mm2 sr is feasible at a high repetition rate.

  16. Bright circularly polarized soft X-ray high harmonics for X-ray magnetic circular dichroism

    Science.gov (United States)

    Fan, Tingting; Grychtol, Patrik; Knut, Ronny; Hernández-García, Carlos; Hickstein, Daniel D.; Zusin, Dmitriy; Gentry, Christian; Dollar, Franklin J.; Mancuso, Christopher A.; Hogle, Craig W.; Kfir, Ofer; Legut, Dominik; Carva, Karel; Ellis, Jennifer L.; Dorney, Kevin M.; Chen, Cong; Shpyrko, Oleg G.; Fullerton, Eric E.; Cohen, Oren; Oppeneer, Peter M.; Milošević, Dejan B.; Becker, Andreas; Jaroń-Becker, Agnieszka A.; Popmintchev, Tenio; Murnane, Margaret M.; Kapteyn, Henry C.

    2015-01-01

    We demonstrate, to our knowledge, the first bright circularly polarized high-harmonic beams in the soft X-ray region of the electromagnetic spectrum, and use them to implement X-ray magnetic circular dichroism measurements in a tabletop-scale setup. Using counterrotating circularly polarized laser fields at 1.3 and 0.79 µm, we generate circularly polarized harmonics with photon energies exceeding 160 eV. The harmonic spectra emerge as a sequence of closely spaced pairs of left and right circularly polarized peaks, with energies determined by conservation of energy and spin angular momentum. We explain the single-atom and macroscopic physics by identifying the dominant electron quantum trajectories and optimal phase-matching conditions. The first advanced phase-matched propagation simulations for circularly polarized harmonics reveal the influence of the finite phase-matching temporal window on the spectrum, as well as the unique polarization-shaped attosecond pulse train. Finally, we use, to our knowledge, the first tabletop X-ray magnetic circular dichroism measurements at the N4,5 absorption edges of Gd to validate the high degree of circularity, brightness, and stability of this light source. These results demonstrate the feasibility of manipulating the polarization, spectrum, and temporal shape of high harmonics in the soft X-ray region by manipulating the driving laser waveform. PMID:26534992

  17. Bright circularly polarized soft X-ray high harmonics for X-ray magnetic circular dichroism.

    Science.gov (United States)

    Fan, Tingting; Grychtol, Patrik; Knut, Ronny; Hernández-García, Carlos; Hickstein, Daniel D; Zusin, Dmitriy; Gentry, Christian; Dollar, Franklin J; Mancuso, Christopher A; Hogle, Craig W; Kfir, Ofer; Legut, Dominik; Carva, Karel; Ellis, Jennifer L; Dorney, Kevin M; Chen, Cong; Shpyrko, Oleg G; Fullerton, Eric E; Cohen, Oren; Oppeneer, Peter M; Milošević, Dejan B; Becker, Andreas; Jaroń-Becker, Agnieszka A; Popmintchev, Tenio; Murnane, Margaret M; Kapteyn, Henry C

    2015-11-17

    We demonstrate, to our knowledge, the first bright circularly polarized high-harmonic beams in the soft X-ray region of the electromagnetic spectrum, and use them to implement X-ray magnetic circular dichroism measurements in a tabletop-scale setup. Using counterrotating circularly polarized laser fields at 1.3 and 0.79 µm, we generate circularly polarized harmonics with photon energies exceeding 160 eV. The harmonic spectra emerge as a sequence of closely spaced pairs of left and right circularly polarized peaks, with energies determined by conservation of energy and spin angular momentum. We explain the single-atom and macroscopic physics by identifying the dominant electron quantum trajectories and optimal phase-matching conditions. The first advanced phase-matched propagation simulations for circularly polarized harmonics reveal the influence of the finite phase-matching temporal window on the spectrum, as well as the unique polarization-shaped attosecond pulse train. Finally, we use, to our knowledge, the first tabletop X-ray magnetic circular dichroism measurements at the N4,5 absorption edges of Gd to validate the high degree of circularity, brightness, and stability of this light source. These results demonstrate the feasibility of manipulating the polarization, spectrum, and temporal shape of high harmonics in the soft X-ray region by manipulating the driving laser waveform.

  18. High resolution spectroscopy of bright subdwarf B stars - I. Radial velocity variables

    CERN Document Server

    Edelmann, H; Altmann, M; Karl, C; Lisker, T

    2005-01-01

    Radial velocity curves for 15 bright subdwarf B binary systems have been measured using high precision radial velocity measurements from high S/N optical high-resolution spectra. In addition, two bright sdB stars are discovered to be radial velocity variable but the period could not yet be determined. The companions for all systems are unseen. The periods range from about 0.18 days up to more than ten days. The radial velocity semi amplitudes are found to lie between 15 and 130 km/s. Using the mass functions, the masses of the unseen companions have been constrained to lower limits of 0.03 up to 0.55 M_sun, and most probable values of 0.03 up to 0.81 M_sun. The invisible companions for three of our program stars are undoubtedly white dwarfs. In the other cases they could be either white dwarfs or main sequence stars. For two stars the secondaries could possibly be brown dwarfs. As expected, the orbits are circular for most of the systems. However, for one third of the program stars we find slightly eccentric ...

  19. High Brightness Gamma-Ray Production at Fermilab Accelerator Science and Technology (FAST) Facility

    Energy Technology Data Exchange (ETDEWEB)

    Mihalcea, Daniel [Northern Illinois U.; Jacobson, B. [RadiaBeam Tech.; Murokh, A. [RadiaBeam Tech.; Piiot, P. [Northern Illinois U.; Ruan, J. [Fermilab

    2016-10-10

    Electron beams with energies of the order of a few 100’s of MeV and low transverse emittance, in combination with powerful infrared lasers, allow for the production of high quality gamma rays through Inverse Compton Scattering (ICS). At Fermilab Accelerator Science and Technology (FAST) facility, a 300 MeV beam will be used to generate gamma rays with maximum photon energies of up to ∼ 1.5 MeV and brightness of the order of 1021 photons/[s-(mm-mrad)2- 0.1%BW]. Due to the low electron-beam transverse emittance, the relative bandwidth of the scattered radiation is expected to be ≤ 1%. A key challenge toward the production of high radiation dose and brightness is to enhance the energy of the infrared 3 ps laser pulses to the joule level. In this contribution, we present the plans for the experimental setup, along with comprehensive numerical simulations of the ICS process.

  20. Sliding Mode Pulsed Averaging IC Drivers for High Brightness Light Emitting Diodes

    Energy Technology Data Exchange (ETDEWEB)

    Dr. Anatoly Shteynberg, PhD

    2006-08-17

    This project developed new Light Emitting Diode (LED) driver ICs associated with specific (uniquely operated) switching power supplies that optimize performance for High Brightness LEDs (HB-LEDs). The drivers utilize a digital control core with a newly developed nonlinear, hysteretic/sliding mode controller with mixed-signal processing. The drivers are flexible enough to allow both traditional microprocessor interface as well as other options such as “on the fly” adjustment of color and brightness. Some other unique features of the newly developed drivers include • AC Power Factor Correction; • High power efficiency; • Substantially fewer external components should be required, leading to substantial reduction of Bill of Materials (BOM). Thus, the LED drivers developed in this research : optimize LED performance by increasing power efficiency and power factor. Perhaps more remarkably, the LED drivers provide this improved performance at substantially reduced costs compared to the present LED power electronic driver circuits. Since one of the barriers to market penetration for HB-LEDs (in particular “white” light LEDs) is cost/lumen, this research makes important contributions in helping the advancement of SSL consumer acceptance and usage.

  1. High brightness MEMS mirror based head-up display (HUD) modules with wireless data streaming capability

    Science.gov (United States)

    Milanovic, Veljko; Kasturi, Abhishek; Hachtel, Volker

    2015-02-01

    A high brightness Head-Up Display (HUD) module was demonstrated with a fast, dual-axis MEMS mirror that displays vector images and text, utilizing its ~8kHz bandwidth on both axes. Two methodologies were evaluated: in one, the mirror steers a laser at wide angles of phone applications is demonstrated, utilizing the mobile device both for content generation based on various messages or data, and for content streaming to the MEMS controller via Bluetooth interface. The display unit is highly resistant to vibrations and shock, and requires only ~1.5W to operate, even with content readable in sunlit outdoor conditions. The low power requirement is in part due to a vector graphics approach, allowing the efficient use of laser power, and also due to the use of a single, relatively high efficiency laser and simple optics.

  2. High-power, high-efficiency, high-brightness long-wavelength laser diodes

    Science.gov (United States)

    Patterson, Steve; Crump, Paul; Wang, Jun; Dong, Weimin; Grimshaw, Mike; Zhang, Shiguo; Elim, Sandrio; Das, Suhit; Bougher, Mike; Patterson, Jason; Kuang, Guokui; Bell, Jake; Farmer, Jason; DeVito, Mark

    2006-05-01

    Interest is rapidly growing in solid-state lasers emitting from 1500-nm to 2100-nm with applications in eye-safe range finding, LIDAR, infrared countermeasures, medicine, dentistry, and others. Traditionally, these solid-state lasers have been pumped by flash lamps or more recently, by semiconductor diode lasers. In the case of the latter, the diodes of choice have been those emitting below 1-μm. The sub-micron class of semiconductor diode lasers is highly mature and has enjoyed recent rapid advances in power and efficiency. Unfortunately, the quantum defect generated when converting to the desired wavelengths results in large amounts of excess heat generation leading to costly and heavy, expensive cooling systems and performance problems related to thermal lensing. System complexity adds further cost and weight when intermediaries, such as optical parametric oscillators, are required to reach the desired longer wavelengths. Recent advances in laser diodes emitting from 1400-nm to over 1900-nm now enable the near resonant pumping of such solid state media as Er:YAG, Ho:YAG and Cr:ZnSe. Record results in the peak output power and electrical-to-optical conversion efficiency of diode lasers emitting around 1470-nm, 1700-nm and 1900-nm are presented here.

  3. Bright/Arid3A Acts as a Barrier to Somatic Cell Reprogramming through Direct Regulation of Oct4, Sox2, and Nanog

    Directory of Open Access Journals (Sweden)

    Melissa Popowski

    2014-01-01

    Full Text Available We show here that singular loss of the Bright/Arid3A transcription factor leads to reprograming of mouse embryonic fibroblasts (MEFs and enhancement of standard four-factor (4F reprogramming. Bright-deficient MEFs bypass senescence and, under standard embryonic stem cell (ESC culture conditions, spontaneously form clones that in vitro express pluripotency markers, differentiate to all germ lineages, and in vivo form teratomas and chimeric mice. We demonstrate that BRIGHT binds directly to the promoter/enhancer regions of Oct4, Sox2, and Nanog to contribute to their repression in both MEFs and ESCs. Thus, elimination of the BRIGHT barrier may provide an approach for somatic cell reprogramming.

  4. High Density Molecular Gas in the IR-bright Galaxy System VV114

    CERN Document Server

    Iono, D; Yun, M S; Matsushita, S; Peck, A B; Sakamoto, K

    2004-01-01

    New high resolution CO(3-2) interferometric map of the IR-bright interacting galaxy system VV114 observed with the Submillimeter Array (SMA) reveal a substantial amount of warm and dense gas in the IR-bright but optically obscured galaxy, VV114E, and the overlap region connecting the two nuclei. A 1.8 x 1.4 kpc concentration of CO(3-2) emitting gas with a total mass of 4 x 10^9 Msun coincides with the peaks of NIR, MIR, and radio continuum emission found previously by others, identifying the dense fuel for the AGN and/or the starburst activity there. Extensive CO(2-1) emission is also detected, revealing detailed distribution and kinematics that are consistent with the earlier CO(1-0) results. The widely distributed molecular gas traced in CO(2-1) and the distributed discrete peaks of CO(3-2) emission suggest that a spatially extended intense starbursts may contribute significantly to its large IR luminosity. These new observations further support the notion that VV114 is approaching its final stage of merger...

  5. High-energy Neutrino Flares from X-Ray Bright and Dark Tidal Disruption Events

    Science.gov (United States)

    Senno, Nicholas; Murase, Kohta; Mészáros, Peter

    2017-03-01

    X-ray and γ-ray observations by the Swift satellite revealed that a fraction of tidal disruption events (TDEs) have relativistic jets. Jetted TDEs have been considered to be potential sources of very-high-energy cosmic-rays and neutrinos. In this work, using semi-analytical methods, we calculate neutrino spectra of X-ray bright TDEs with powerful jets and dark TDEs with possible choked jets, respectively. We estimate their neutrino fluxes and find that non-detection would give us an upper limit on the baryon loading of the jet luminosity contained in cosmic-rays ξ cr ≲ 20–50 for Sw J1644+57. We show that X-ray bright TDEs make a sub-dominant (≲5%–10%) contribution to IceCube’s diffuse neutrino flux, and study possible contributions of X-ray dark TDEs given that particles are accelerated in choked jets or disk winds. We discuss future prospects for multi-messenger searches of the brightest TDEs.

  6. Stable droplet generator for a high brightness laser produced plasma extreme ultraviolet source

    Science.gov (United States)

    Vinokhodov, A.; Krivokorytov, M.; Sidelnikov, Yu.; Krivtsun, V.; Medvedev, V.; Bushuev, V.; Koshelev, K.; Glushkov, D.; Ellwi, S.

    2016-10-01

    We present the results of the low-melting liquid metal droplets generation based on excited Rayleigh jet breakup. We discuss on the operation of the industrial and in-house designed and manufactured dispensing devices for the droplets generation. Droplet diameter can be varied in the range of 30-90 μm. The working frequency of the droplets, velocity, and the operating temperature were in the ranges of 20-150 kHz, 4-15 m/s, and up to 250 °C, respectively. The standard deviations for the droplet center of mass position both their diameter σ < 1 μm at the distance of 45 mm from the nozzle. Stable operation in the long-term (over 1.5 h) was demonstrated for a wide range of the droplet parameters: diameters, frequencies, and velocities. Physical factors affecting the stability of the generator operation have been identified. The technique for droplet synchronization, allowing using the droplet as a target for laser produced plasma, has been created; in particular, the generator has been successfully used in a high brightness extreme ultraviolet (EUV) light source. The operation with frequency up to 8 kHz was demonstrated as a result of the experimental simulation, which can provide an average brightness of the EUV source up to ˜1.2 kW/mm2 sr.

  7. Efficient Pumping Schemes for High Average Brightness Collisional X-ray Lasers

    Energy Technology Data Exchange (ETDEWEB)

    Keenan, R; Dunn, J; Shlyaptsev, V N; Smith, R F; Patel, P K; Price, D F

    2003-10-07

    Advances in transient collisional x-ray lasers have been demonstrated over the last 5 years as a technique for achieving tabletop soft x-ray lasers using 2-10 J of laser pump energy. The high peak brightness of these sources operating in the high output saturation regime, in the range of 10{sup 24}-10{sup 25} ph. mm{sup -2} mrad{sup -2} s-1 (0.1% BW){sup -1}, is ideal for many applications requiring high photon fluence in a single short burst. However, the pump energy required for these x-ray lasers is still relatively high and limits the x-ray laser repetition rate to 1 shot every few minutes. Higher repetition rate collisional schemes have been reported and show some promise for high output in the future. We report a novel technique for enhancing the coupling efficiency of the laser pump into the gain medium that could lead to enhanced x-ray inversion with a factor of ten reduction in the drive energy. This has been applied to the collisional excitation scheme for Ni-like Mo at 18.9 nm and x-ray laser output has been demonstrated. Preliminary results show lasing on a single shot of the optical laser operating at 10 Hz and with 70 mJ in the short pulse. Such a proposed source would have higher average brightness, {approx}10{sup 14} ph. mm{sup -2} mrad{sup -2} s{sup -1} (0.1% BW){sup -1}, than present bending magnet 3rd generation synchrotron sources operating at the same spectral range.

  8. The Statistics of Radio Astronomical Polarimetry: Bright Sources and High Time Resolution

    CERN Document Server

    Van Straten, W

    2008-01-01

    A four-dimensional statistical description of electromagnetic radiation is developed and applied to the analysis of radio pulsar polarization. The new formalism provides an elementary statistical explanation of the modal broadening phenomenon in single pulse observations. It is also used to argue that the degree of polarization of giant pulses has been poorly defined in past studies. Single and giant pulse polarimetry typically involves sources with large flux densities and observations with high time resolution, factors that necessitate consideration of source-intrinsic noise and small-number statistics. Self noise is shown to fully explain the excess polarization dispersion previously noted in single pulse observations of bright pulsars, obviating the need for additional randomly polarized radiation. Rather, these observations are more simply interpreted as an incoherent sum of covariant, orthogonal, partially polarized modes. Based on this premise, the four-dimensional covariance matrix of the Stokes param...

  9. A novel high-contrast imaging technique based on optical tunneling to search for faint companions around bright stars at the limit of diffraction

    CERN Document Server

    Derigs, Dominik; Ghosh, Dhriti Sundar; Abel-Tibérini, Laëtitia

    2016-01-01

    We present a novel application of optical tunneling in the context of high-angular resolution, high-contrast techniques with the aim of improving direct imaging capabilities of faint companions in the vicinity of bright stars. In contrast to existing techniques like coronagraphy, we apply well-established techniques from integrated optics to exclusively extinct a very narrow angular direction coming from the sky. This extinction is achieved in the pupil plane and does not suffer from diffraction pattern residuals. We give a comprehensive presentation of the underlying theory as well as first laboratory results.

  10. The complex evolutionary paths of local infrared bright galaxies: a high angular resolution mid-infrared view

    CERN Document Server

    Alonso-Herrero, A; Roche, P F; Hernan-Caballero, A; Aretxaga, I; Martinez-Paredes, M; Almeida, C Ramos; Pereira-Santaella, M; Diaz-Santos, T; Levenson, N A; Packham, C; Colina, L; Esquej, P; Gonzalez-Martin, O; Ichikawa, K; Imanishi, M; Espinosa, J M Rodriguez; Telesco, C

    2016-01-01

    We investigate the evolutionary connection between local IR-bright galaxies ($\\log L_{\\rm IR}\\ge 11.4\\,L_\\odot$) and quasars. We use high angular resolution ($\\sim$ 0.3-0.4 arcsec $\\sim$ few hundred parsecs) $8-13\\,\\mu$m ground-based spectroscopy to disentangle the AGN mid-IR properties from those of star formation. The comparison between the nuclear $11.3\\,\\mu$m PAH feature emission and that measured with Spitzer/IRS indicates that the star formation is extended over a few kpc in the IR-bright galaxies. The AGN contribution to the total IR luminosity of IR-bright galaxies is lower than in quasars. Although the dust distribution is predicted to change as IR-bright galaxies evolve to IR-bright quasars and then to optical quasars, we show that the AGN mid-IR emission of all the quasars in our sample is not significantly different. In contrast, the nuclear emission of IR-bright galaxies with low AGN contributions appears more heavily embedded in dust although there is no clear trend with the interaction stage or...

  11. High-power high-brightness solar laser approach for renewable Mg recovery from MgO

    Science.gov (United States)

    Almeida, Joana; Liang, Dawei

    2014-08-01

    Hydrogen and heat energy from the reaction of magnesium with water can be used for engines and fuel cells. However, at least 4000 K is necessary for magnesium oxide reduction. Ultra high brightness solar-pumped lasers become essential to make this renewable process technology efficient and economically competitive. 2.3 mg/kJ solar laser - induced magnesium production efficiency has been achieved by T. Yabe et al., in 2012, by focusing a 53 W solar laser beam on a mixture of MgO with Si as reducing agent. This result is however far from the 12.1 mg/kJ attained with 2 kW/mm2 CO2 laser beam. To improve substantially the solar laser - induced Mg production efficiency, a simple high-power, high brightness Nd:YAG solar laser pumping approach is proposed. The solar radiation is both collected and concentrated by four Fresnel lenses, and redirected towards a Nd:YAG laser head by four plane folding mirrors. A fused-silica secondary concentrator is used to compress the highly concentrated solar radiation to a laser rod. Optimum pumping conditions and laser resonator parameters are found through ZEMAXand LASCADnumerical analysis. High-record solar laser beam brightness figure of merit - defined as the ratio between laser power and the product of Mx 2 and My 2 - of 10.5 W is numerically achieved, being 5.5 times higher than the previous record and about 1600 times more than that of the most powerful Nd:YAG solar laser. 8340 W/mm2 is numerically achieved at its focal region, which can quadruple the magnesium production efficiency with clean energy.

  12. CHLORINE DIOXIDE BLEACHING OF SODA-ANTHRAQUINONE JUTE PULP TO A VERY HIGH BRIGHTNESS

    Directory of Open Access Journals (Sweden)

    M. Sarwar Jahan

    2010-05-01

    Full Text Available Bleaching of soda-anthraquinone jute pulp by chlorine dioxide (ClO2 was studied to reach a target brightness of above 88% for the purpose of using less bleaching chemicals. The performance of either chlorine dioxide or peroxide in the final bleaching to boost brightness was also studied. The experimental results revealed that the final brightness depended on ClO2 charge in the Do and D1 stages. The brightness reversion was lower when the final stage brightening was done by peroxide. The use of Mg(OH2 in the D1 and D2 stages improved the final brightness due to the formation of less chlorate and chlorite during the Mg(OH2- based ClO2 brightening stages. The strength properties of pulp bleached by peroxide in the final stage was slightly better than that from ClO2 as the final ClO2 bleaching stage.

  13. Characterizing Near-Infrared Sky Brightness in the Canadian High Arctic

    CERN Document Server

    Sivanandam, Suresh; Abraham, Roberto; Tekatch, Anthony; Steinbring, Eric; Ngan, Wayne; Welch, Doug L; Law, Nicholas M

    2012-01-01

    We present the first measurements of the near-infrared (NIR), specifically the J-band, sky background in the Canadian High Arctic. There has been considerable recent interest in the development of an astronomical observatory in Ellesmere Island; initial site testing has shown promise for a world-class site. Encouragement for our study came from sky background measurements on the high Antarctic glacial plateau in winter that showed markedly lower NIR emission when compared to good mid-latitude astronomical sites due to reduced emission from OH airglow lines. This is possibly a Polar effect and may also be present in the High Arctic. To test this hypothesis, we carried out an experiment which measured the the J-band sky brightness in the High Arctic during winter. We constructed a zenith-pointing, J-band photometer, and installed it at the Polar Environment Atmospheric Research Laboratory (PEARL) near Eureka, Nunavut (latitude: 80 degrees N). We present the design of our photometer and our results from our shor...

  14. Researching the 915 nm high-power and high-brightness semiconductor laser single chip coupling module

    Science.gov (United States)

    Wang, Xin; Wang, Cuiluan; Wu, Xia; Zhu, Lingni; Jing, Hongqi; Ma, Xiaoyu; Liu, Suping

    2017-02-01

    Based on the high-speed development of the fiber laser in recent years, the development of researching 915 nm semiconductor laser as main pumping sources of the fiber laser is at a high speed. Because the beam quality of the laser diode is very poor, the 915 nm laser diode is generally based on optical fiber coupling module to output the laser. Using the beam-shaping and fiber-coupling technology to improve the quality of output beam light, we present a kind of high-power and high-brightness semiconductor laser module, which can output 13.22 W through the optical fiber. Based on 915 nm GaAs semiconductor laser diode which has output power of 13.91 W, we describe a thoroughly detailed procedure for reshaping the beam output from the semiconductor laser diode and coupling the beam into the optical fiber of which the core diameter is 105 μm and the numerical aperture is 0.18. We get 13.22 W from the output fiber of the module at 14.5 A, the coupling efficiency of the whole module is 95.03% and the brightness is 1.5 MW/cm2 -str. The output power of the single chip semiconductor laser module achieves the advanced level in the domestic use.

  15. Search for high-energy neutrinos from bright GRBs with ANTARES

    Science.gov (United States)

    Albert, A.; André, M.; Anghinolfi, M.; Anton, G.; Ardid, M.; Aubert, J.-J.; Avgitas, T.; Baret, B.; Barrios-Martí, J.; Basa, S.; Bertin, V.; Biagi, S.; Bormuth, R.; Bourret, S.; Bouwhuis, M. C.; Bruijn, R.; Brunner, J.; Busto, J.; Capone, A.; Caramete, L.; Carr, J.; Celli, S.; Chiarusi, T.; Circella, M.; Coelho, J. A. B.; Coleiro, A.; Coniglione, R.; Costantini, H.; Coyle, P.; Creusot, A.; Deschamps, A.; De Bonis, G.; Distefano, C.; di Palma, I.; Donzaud, C.; Dornic, D.; Drouhin, D.; Eberl, T.; El Bojaddaini, I.; Elsässer, D.; Enzenhöfer, A.; Felis, I.; Fusco, L. A.; Galatà, S.; Gay, P.; Geißelsöder, S.; Geyer, K.; Giordano, V.; Gleixner, A.; Glotin, H.; Gregoire, T.; Gracia-Ruiz, R.; Graf, K.; Hallmann, S.; van Haren, H.; Heijboer, A. J.; Hello, Y.; Hernández-Rey, J. J.; Hößl, J.; Hofestädt, J.; Hugon, C.; Illuminati, G.; James, C. W.; de Jong, M.; Jongen, M.; Kadler, M.; Kalekin, O.; Katz, U.; Kießling, D.; Kouchner, A.; Kreter, M.; Kreykenbohm, I.; Kulikovskiy, V.; Lachaud, C.; Lahmann, R.; Lefèvre, D.; Leonora, E.; Lotze, M.; Loucatos, S.; Marcelin, M.; Margiotta, A.; Marinelli, A.; Martínez-Mora, J. A.; Mathieu, A.; Mele, R.; Melis, K.; Michael, T.; Migliozzi, P.; Moussa, A.; Mueller, C.; Nezri, E.; Păvălaş, G. E.; Pellegrino, C.; Perrina, C.; Piattelli, P.; Popa, V.; Pradier, T.; Quinn, L.; Racca, C.; Riccobene, G.; Roensch, K.; Sánchez-Losa, A.; Saldaña, M.; Salvadori, I.; Samtleben, D. F. E.; Sanguineti, M.; Sapienza, P.; Schnabel, J.; Schüssler, F.; Seitz, T.; Sieger, C.; Spurio, M.; Stolarczyk, Th.; Taiuti, M.; Tayalati, Y.; Trovato, A.; Tselengidou, M.; Turpin, D.; Tönnis, C.; Vallage, B.; Vallée, C.; Van Elewyck, V.; Vivolo, D.; Vizzocca, A.; Wagner, S.; Wilms, J.; Zornoza, J. D.; Zúñiga, J.

    2017-07-01

    Gamma-ray bursts are thought to be sites of hadronic acceleration, thus neutrinos are expected from the decay of charged particles, produced in pγ interactions. The methods and results of a search for muon neutrinos in the data of the ANTARES neutrino telescope from four bright GRBs (GRB 080916C, GRB 110918A, GRB 130427A and GRB 130505A) observed between 2008 and 2013 are presented. Two scenarios of the fireball model have been investigated: the internal shock scenario, leading to the production of neutrinos with energies mainly above 100 TeV, and the photospheric scenario, characterized by a low-energy component in neutrino spectra due to the assumption of neutrino production closer to the central engine. Since no neutrino events have been detected in temporal and spatial coincidence with these bursts, upper limits at 90 per cent confidence level on the expected neutrino fluxes are derived. The non-detection allows for directly constraining the bulk Lorentz factor of the jet Γ and the baryon loading fp.

  16. Bright high-repetition-rate source of narrowband extreme-ultraviolet harmonics beyond 22 eV

    Energy Technology Data Exchange (ETDEWEB)

    Wang, He [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Xu, Yiming [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Ulonska, Stefan [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Robinson, Joseph S. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Ranitovic, Predrag [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division; Kaindl, Robert A. [Lawrence Berkeley National Lab. (LBNL), Berkeley, CA (United States). Materials Sciences Division

    2015-06-11

    Novel table-top sources of extreme-ultraviolet light based on high-harmonic generation yield unique insight into the fundamental properties of molecules, nanomaterials or correlated solids, and enable advanced applications in imaging or metrology. Extending high-harmonic generation to high repetition rates portends great experimental benefits, yet efficient extreme-ultraviolet conversion of correspondingly weak driving pulses is challenging. In this article, we demonstrate a highly-efficient source of femtosecond extreme-ultraviolet pulses at 50-kHz repetition rate, utilizing the ultraviolet second-harmonic focused tightly into Kr gas. In this cascaded scheme, a photon flux beyond ≈3 × 1013 s-1 is generated at 22.3 eV, with 5 × 10-5 conversion efficiency that surpasses similar harmonics directly driven by the fundamental by two orders-of-magnitude. The enhancement arises from both wavelength scaling of the atomic dipole and improved spatio-temporal phase matching, confirmed by simulations. Finally, spectral isolation of a single 72-meV-wide harmonic renders this bright, 50-kHz extreme-ultraviolet source a powerful tool for ultrafast photoemission, nanoscale imaging and other applications.

  17. High brightness sub-nanosecond Q-switched laser using volume Bragg gratings

    Science.gov (United States)

    Anderson, Brian M.; Hale, Evan; Venus, George; Ott, Daniel; Divliansky, Ivan; Glebov, Leonid

    2016-03-01

    The design of Q-switched lasers capable of producing pulse widths of 100's of picoseconds necessitates the cavity length be shorter than a few centimeters. Increasing the amount of energy extracted per pulse requires increasing the mode area of the resonator that for the same cavity length causes exciting higher order transverse modes and decreasing the brightness of the output radiation. To suppress the higher order modes of these multimode resonators while maintaining the compact cavity requires the use of intra-cavity angular filters. A novel Q-switched laser design is presented using transmitting Bragg gratings (TBGs) as angular filters to suppress the higher order transverse modes. The laser consists of a 5 mm thick slab of Nd:YAG, a 3 mm thick slab of Cr:YAG with a 20% transmission, one TBG aligned to suppress the higher order modes along the x-axis, and a 40% output coupler. The gratings are recorded in photo-thermo-refractive (PTR) glass, which has a high damage threshold that can withstand both the high peak powers and high average powers present within the resonator. Using a 4.1 mrad TBG in a 10.8 mm long resonator with an 800μm x 400 μm pump beam, a nearly diffraction limited beam quality of M2 = 1.3 is obtained in a 0.76 mJ pulse with a pulse width of 614 ps.

  18. Strain relief InGaN/GaN MQW micro-pillars for high brightness LEDs

    KAUST Repository

    Shen, Chao

    2013-01-01

    Micro-structured group-III-nitrides are considered as promising strain relief structures for high efficiency solid state lighting. In this work, the strain field in InGaN/GaN multi-quantum wells (MQWs) micro-pillars is investigated using micro-Raman spectroscopy and the design of micro-pillars were studied experimentally. We distinguished the strained and strain-relieved signatures of the GaN layer from the E2 phonon peak split from the Raman scattering signatures at 572 cm-1 and 568 cm-1, respectively. The extent of strain relief is examined considering the height and size of micro-pillars fabricated using focused ion beam (FIB) micro-machining technique. A significant strain relief can be achieved when one micro-machined through the entire epi-layers, 3 μm in our study. The dependence of strain relief on micro-pillar diameter (D) suggested that micro-pillar with D < 3 μm showed high degree of strain relief. Our results shed new insights into designing strain-relieved InGaN/GaN microstructures for high brightness light emitting diode arrays. © 2013 IEEE.

  19. Directed evolution of a monomeric, bright and photostable version of Clavularia cyan fluorescent protein: structural characterization and applications in fluorescence imaging

    Energy Technology Data Exchange (ETDEWEB)

    Al, Hui-wang; Henderson, J. Nathan; Remington, S. James; Campbell, Robert E. (Alberta); (Oregon)

    2008-05-07

    The arsenal of engineered variants of the GFP [green FP (fluorescent protein)] from Aequorea jellyfish provides researchers with a powerful set of tools for use in biochemical and cell biology research. The recent discovery of diverse FPs in Anthozoa coral species has provided protein engineers with an abundance of alternative progenitor FPs from which improved variants that complement or supersede existing Aequorea GFP variants could be derived. Here, we report the engineering of the first monomeric version of the tetrameric CFP (cyan FP) cFP484 from Clavularia coral. Starting from a designed synthetic gene library with mammalian codon preferences, we identified dimeric cFP484 variants with fluorescent brightness significantly greater than the wild-type protein. Following incorporation of dimer-breaking mutations and extensive directed evolution with selection for blue-shifted emission, high fluorescent brightness and photostability, we arrived at an optimized variant that we have named mTFP1 [monomeric TFP1 (teal FP 1)]. The new mTFP1 is one of the brightest and most photostable FPs reported to date. In addition, the fluorescence is insensitive to physiologically relevant pH changes and the fluorescence lifetime decay is best fitted as a single exponential. The 1.19 {angstrom} crystal structure (1 {angstrom}=0.1 nm) of mTFP1 confirms the monomeric structure and reveals an unusually distorted chromophore conformation. As we experimentally demonstrate, the high quantum yield of mTFP1 (0.85) makes it particularly suitable as a replacement for ECFP (enhanced CFP) or Cerulean as a FRET (fluorescence resonance energy transfer) donor to either a yellow or orange FP acceptor.

  20. Tailored bars at 976 nm for high-brightness fiber-coupled modules

    Science.gov (United States)

    Kissel, Heiko; Wolf, Paul; Bachmann, Alexander; Lauer, Christian; König, Harald; Tomm, Jens W.; Köhler, Bernd; Strauß, Uwe; Biesenbach, Jens

    2017-02-01

    In 2007, DILAS proposed the approach to tailor the output beam characteristics of laser diodes to match the required beam quality of a desired target fiber, thus, drastically simplifying the coupling optics to basically only fast and slow axis collimation lenses. Over the last years, we developed and improved this tailored bar (T-Bar) concept together with the tooling for fully automated mass production of fiber-coupled T-Bar modules for fiber laser pumping as well as for direct applications. We present results on the improvement of T-Bars tailored for optimized coupling into fibers with a diameter of 200 μm with NA 0.22 corresponding to a beam parameter product of 22 mm·mrad. Cost efficient coupling to this fiber requires a tailored beam parameter product smaller than 15.5 mm·mrad in slow axis direction corresponding to a slow axis beam divergence of 7° (full angle, 95% power content) for five 100 μm wide emitters. The improved T-Bars fulfil this requirement up to an output power of 52 W with a brightness of 3.1 W/mm·mrad and a power conversion efficiency achieving 69%. This progress in the T-Bar performance together with modifications in the module design led to the increase of the reliable output power from 135 W in 2009 to 360 W in 2017 for a T-Bar module with one baseplate. We will also give a review of the main development steps and further R and D improvements.

  1. Non-uniform DFB-surface-etched gratings for enhanced performance high power, high brightness broad area lasers

    Science.gov (United States)

    Decker, J.; Fricke, J.; Maaßdorf, A.; Erbert, G.; Tränkle, G.; Crump, P.

    2017-02-01

    Monolithic spectral stabilization is demonstrated in narrow-stripe broad-area lasers (NBA) with high power (5W), conversion efficiency (50%) and high brightness, by using optimized high-order surface-etched DFB gratings. However, surface etched gratings introduce a high index contrast into the semiconductor, leading to the scattering losses increasing rapidly with groove etch depth, limiting efficiency and yield. We therefore review progress in the exploitation of novel, non-uniform grating configurations for improved performance. Devices with non-uniform gratings whose groove etch depth decreases toward the front facet (apodized grating) are shown to operate with enhanced spectrally stable power (6W) compared to devices with uniform gratings.

  2. High brightness three-dimensional light field display based on the aspheric substrate Fresnel-lens-array with eccentric pupils

    Science.gov (United States)

    Gao, Xin; Sang, Xinzhu; Yu, Xunbo; Cao, Xuemei; Chen, Zhidong; Yan, Binbin; Yuan, Jinhui; Wang, Kuiru; Yu, Chongxiu; Dou, Wenhua; Xiao, Liquan

    2016-02-01

    The brightness and viewing field of the reproductive three-dimensional (3D) image are crucial factors to realize a comfortable 3D perception for the light field display based on the liquid crystal device (LCD). To improve the illuminance of 3D image with sub-image-units with small aperture angles and enlarge the viewing field, the illuminance of the Fresnel-lens combining with the sub-images on LCD is analyzed and designed. Theoretical and experimental results show that the Fresnel-lens-array with eccentric pupil(FAEP) can address above problems. A 3D light field display based on LCD with FAEP and directional diffuser screen are used to reconstruct the target 3D field. 25 parallax sub-images are projected to the directional diffuser screen to verify the improvement of illuminance and viewing field. To reduce eccentric aberration introduced by eccentric pupil, a novel structure of Fresnel-lens-array is presented to reduce the aberration. The illuminance and viewing field are well promoted at the same time. 3D image with the high quality can be achieved.

  3. A time-dependent search for high-energy neutrinos from bright GRBs with ANTARES

    Directory of Open Access Journals (Sweden)

    Celli Silvia

    2017-01-01

    Full Text Available Astrophysical point-like neutrino sources, like Gamma-Ray Bursts (GRBs, are one of the main targets for neutrino telescopes, since they are among the best candidates for Ultra-High-Energy Cosmic Ray (UHECR acceleration. From the interaction between the accelerated protons and the intense radiation fields of the source jet, charged mesons are produced, which then decay into neutrinos. The methods and the results of a search for high-energy neutrinos in spatial and temporal correlation with the detected gamma-ray emission are presented for four bright GRBs observed between 2008 and 2013: a time-dependent analysis, optimised for each flare of the selected bursts, is performed to predict detailed neutrino spectra. The internal shock scenario of the fireball model is investigated, relying on the neutrino spectra computed through the numerical code NeuCosmA. The analysis is optimized on a per burst basis, through the maximization of the signal discovery probability. Since no events in ANTARES data passed the optimised cuts, 90% C.L. upper limits are derived on the expected neutrino fluences.

  4. High-power one-, two-, and three-dimensional photonic crystal edge-emitting laser diodes for ultra-high brightness applications

    Science.gov (United States)

    Gordeev, N. Yu.; Maximov, M. V.; Shernyakov, Y. M.; Novikov, I. I.; Karachinsky, L. Ya.; Shchukin, V. A.; Kettler, T.; Posilovic, K.; Ledentsov, N. N.; Bimberg, D.; Duboc, R.; Sharon, A.; Arbiv, D. B.; Ben-Ami, U.

    2008-02-01

    Direct laser diodes can typically provide only a limited single mode power, while ultrahigh-brightness is required for many of the market-relevant applications. Thus, multistage power conversion schemes are applied, when the laser diodes are used just as a pumping source. In this paper we review the recent advances in ultra-large output aperture edge-emitting lasers based on the photonic band crystal (PBC) concept. The concept allows near- and far-field engineering robust to temperature and strain gradients and growth nonuniformities. High-order modes are selectively filtered and the effective optical confinement of the fundamental mode can be dramatically enhanced. At first, we show that robust ultra-narrow vertical beam divergence (operation by processing of the multistripe arrays along their lengths. The concept opens a way for 3D photonic crystal edge emitting lasers potentially allowing scalable single mode power increase to arbitrary high levels.

  5. Control of Coherent Synchrotron Radiation and Micro-Bunching Effects During Transport of High Brightness Electron Beams

    CERN Document Server

    Douglas, D R; Hutton, A; Krafft, G A; Li, R; Neil, G R; Roblin, Y; Tennant, C D; Tsai, C -Y

    2014-01-01

    Beam quality preservation during transport of high-brightness electron beams is of general concern in the design of modern accelerators. Methods to manage incoherent synchrotron radiation (ISR) have been in place for decades; as beam brightness has improved coherent synchrotron radiation (CSR) and the microbunching instability (uBI) have emerged as performance limitations. We apply the compensation analysis of diMitri, Cornacchia, and Spampinati - as previously used by Borland - to the design of transport systems for use with low-emittance beams, and find that appropriately configured second order achromats will suppress transverse emittance growth due to CSR and appear to limit uBI gain.

  6. Determining contrast sensitivity functions for monochromatic light emitted by high-brightness LEDs

    Science.gov (United States)

    Ramamurthy, Vasudha; Narendran, Nadarajah; Freyssinier, Jean Paul; Raghavan, Ramesh; Boyce, Peter

    2004-01-01

    Light-emitting diode (LED) technology is becoming the choice for many lighting applications that require monochromatic light. However, one potential problem with LED-based lighting systems is uneven luminance patterns. Having a uniform luminance distribution is more important in some applications. One example where LEDs are becoming a viable alternative and luminance uniformity is an important criterion is backlighted monochromatic signage. The question is how much uniformity is required for these applications. Presently, there is no accepted metric that quantifies luminance uniformity. A recent publication proposed a method based on digital image analysis to quantify beam quality of reflectorized halogen lamps. To be able to employ such a technique to analyze colored beams generated by LED systems, it is necessary to have contrast sensitivity functions (CSFs) for monochromatic light produced by LEDs. Several factors including the luminance, visual field size, and spectral power distribution of the light affect the CSFs. Although CSFs exist for a variety of light sources at visual fields ranging from 2 degrees to 20 degrees, CSFs do not exist for red, green, and blue light produced by high-brightness LEDs at 2-degree and 10-degree visual fields and at luminances typical for backlighted signage. Therefore, the goal of the study was to develop a family of CSFs for 2-degree and 10-degree visual fields illuminated by narrow-band LEDs at typical luminances seen in backlighted signs. The details of the experiment and the results are presented in this manuscript.

  7. Production of quasi ellipsoidal laser pulses for next generation high brightness photoinjectors

    Energy Technology Data Exchange (ETDEWEB)

    Rublack, T., E-mail: Tino.Rublack@desy.de [DESY, Zeuthen (Germany); Good, J.; Khojoyan, M.; Krasilnikov, M.; Stephan, F. [DESY, Zeuthen (Germany); Hartl, I.; Schreiber, S. [DESY, Hamburg (Germany); Andrianov, A.; Gacheva, E.; Khazanov, E.; Mironov, S.; Potemkin, A.; Zelenogorskii, V.V. [IAP/RAS, Nizhny Novgorod (Russian Federation); Syresin, E. [JINR, Dubna (Russian Federation)

    2016-09-01

    The use of high brightness electron beams in Free Electron Laser (FEL) applications is of increasing importance. One of the most promising methods to generate such beams is the usage of shaped photocathode laser pulses. It has already demonstrated that temporal and transverse flat-top laser pulses can produce very low emittance beams [1]. Nevertheless, based on beam simulations further improvements can be achieved using quasi-ellipsoidal laser pulses, e.g. 30% reduction in transverse projected emittance at 1 nC bunch charge. In a collaboration between DESY, the Institute of Applied Physics of the Russian Academy of Science (IAP RAS) in Nizhny Novgorod and the Joint Institute of Nuclear Research (JINR) in Dubna such a laser system capable of producing trains of laser pulses with a quasi-ellipsoidal distribution, has been developed. The prototype of the system was installed at the Photo Injector Test facility at DESY in Zeuthen (PITZ) and is currently in the commissioning phase. In the following, the laser system will be introduced, the procedure of pulse shaping will be described and the last experimental results will be shown.

  8. Transverse Laser Beam Shaping in High Brightness Electron Gun at ATF

    CERN Document Server

    Roychowdhury, S

    2005-01-01

    The brightness of electron beams from a photo injector is influenced by the transverse and longitudinal distribution of the laser beam illuminating the cathode. Previous studies at Brookhaven Accelerator Test Facility have shown that formation of an ideal e-beam with lowest transverse emittance requires uniform circular distribution of the emitted electrons. The use of the uniformly distributed power of the laser beam may not lead to that of the emitted electrons because of the non-uniform quantum efficiency. A proper shaping of the laser beam can compensate for this non-uniformity. In this paper we describe the use of digital light processing (DLP) technique based on digital mirror device (DMD) for spatial modulation of the laser beam, for measurements of the quantum efficiency map, and for creating the desirable e-beam density profiles. A DMD is aμelectronic mechanical system (MEMS) comprising of millions of highly reflectiveμmirrors controlled by underlying electronics. We present exper...

  9. Three-dimensional quasistatic model for high brightness beam dynamics simulation

    Science.gov (United States)

    Qiang, Ji; Lidia, Steve; Ryne, Robert D.; Limborg-Deprey, Cecile

    2006-04-01

    In this paper, we present a three-dimensional quasistatic model for high brightness beam dynamics simulation in rf/dc photoinjectors, rf linacs, and similar devices on parallel computers. In this model, electrostatic space-charge forces within a charged particle beam are calculated self-consistently at each time step by solving the three-dimensional Poisson equation in the beam frame and then transforming back to the laboratory frame. When the beam has a large energy spread, it is divided into a number of energy bins or slices so that the space-charge forces are calculated from the contribution of each bin and summed together. Image-charge effects from conducting photocathode are also included efficiently using a shifted-Green function method. For a beam with large aspect ratio, e.g., during emission, an integrated Green function method is used to solve the three-dimensional Poisson equation. Using this model, we studied beam transport in one Linac Coherent Light Sources photoinjector design through the first traveling wave linac with initial misalignment with respect to the accelerating axis.

  10. High brightness, quantum-defect-limited conversion efficiency in cladding-pumped Raman fiber amplifiers and oscillators.

    Science.gov (United States)

    Heebner, John E; Sridharan, Arun K; Dawson, Jay W; Messerly, Michael J; Pax, Paul H; Shverdin, Miro Y; Beach, Raymond J; Barty, Chris P J

    2010-07-05

    We present a detailed theoretical investigation of cladding-pumped Raman fiber amplification in an unexplored parameter space of high conversion efficiency (> 60%) and high brightness enhancement (> 1000). Fibers with large clad-to-core diameter ratios can provide a promising means for Raman-based brightness enhancement of diode pump sources. Unfortunately, the diameter ratio cannot be extended indefinitely since the intensity generated in the core can greatly exceed that in the cladding long before the pump is fully depleted. If left uncontrolled, this leads to the generation of parasitic second-order Stokes wavelengths in the core, limiting the conversion efficiency and as we will show, clamping the achievable brightness enhancement. Using a coupled-wave formalism, we present the upper limit on brightness enhancement as a function of diameter ratio for conventionally guided fibers. We further present strategies for overcoming this limit based upon depressed well core designs. We consider two configurations: 1) pulsed cladding-pumped Raman fiber amplifier (CPRFA) and 2) cw cladding-pumped Raman fiber laser (CPRFL).

  11. Cesium telluride cathodes for the next generation of high-average current high-brightness photoinjectors

    Energy Technology Data Exchange (ETDEWEB)

    Filippetto, D., E-mail: dfilippetto@lbl.gov; Qian, H.; Sannibale, F. [Lawrence Berkeley National Laboratory, One Cyclotron Road, Berkeley, California 94720 (United States)

    2015-07-27

    We report on the performances of a Cs{sub 2}Te photocathode under extreme conditions of high peak time-dependent accelerating fields, continuous wave operations, and MHz pulse extraction with up to 0.3 mA average current. The measurements, performed in a normal conducting cavity, show extended lifetime and robustness, elucidate the main mechanisms for cathode degradation, and set the required system vacuum performance for compatibility with the operations of a high average power X-ray free electron laser user facility, opening the doors to the next generation of MHz-scale ultrafast scientific instruments.

  12. High-brightness electron beam evolution following laser-based cleaning of a photocathode

    Directory of Open Access Journals (Sweden)

    F. Zhou

    2012-09-01

    Full Text Available Laser-based techniques have been widely used for cleaning metal photocathodes to increase quantum efficiency (QE. However, the impact of laser cleaning on cathode uniformity and thereby on electron beam quality are less understood. We are evaluating whether this technique can be applied to revive photocathodes used for high-brightness electron sources in advanced x-ray free-electron laser (FEL facilities, such as the Linac Coherent Light Source (LCLS at the SLAC National Accelerator Laboratory. The laser-based cleaning was applied to two separate areas of the current LCLS photocathode on July 4 and July 26, 2011, respectively. The QE was increased by 8–10 times upon the laser cleaning. Since the cleaning, routine operation has exhibited a slow evolution of the QE improvement and comparatively rapid improvement of transverse emittance, with a factor of 3 QE enhancement over five months, and a significant emittance improvement over the initial 2–3 weeks following the cleaning. Currently, the QE of the LCLS photocathode is holding constant at about 1.2×10^{-4}, with a normalized injector emittance of about 0.3  μm for a 150-pC bunch charge. With the proper procedures, the laser-cleaning technique appears to be a viable tool to revive the LCLS photocathode. We present observations and analyses for the QE and emittance evolution in time following the laser-based cleaning of the LCLS photocathode, and comparison to the previous studies, the measured thermal emittance versus the QE and comparison to the theoretical model.

  13. High cortisol awakening response is associated with an impairment of the effect of bright light therapy

    DEFF Research Database (Denmark)

    Martiny, Klaus Per Juul; Lunde, Marianne Anita; Undén, M

    2009-01-01

    OBJECTIVE: We investigated the predictive validity of the cortisol awakening response (CAR) in patients with non-seasonal major depression. METHOD: Patients were treated with sertraline in combination with bright or dim light therapy for a 5-week period. Saliva cortisol levels were measured in 63...

  14. A high-resolution spectroscopy survey of beta Cephei pulsations in bright stars

    NARCIS (Netherlands)

    Telting, J.H.; Schrijvers, C.; Ilyin, I.V.; Uytterhoeven, K.; Ridder, J. de; Aerts, C.C.; Henrichs, H.F.

    2006-01-01

    We present a study of absorption line-profile variations in early-B type near-main-sequence stars without emission lines. We have surveyed a total of 171 bright stars using the Nordic Optical Telescope (NOTSA), William Herschel Telescope (ING) and Coud�uxiliary Telescope (ESO). Our sample contains 7

  15. Relationship Between Solar Coronal X-Ray Brightness and Active Region Magnetic Fields: A Study Using High Resolution Observations

    CERN Document Server

    Hazra, Soumitra; Ravindra, B

    2014-01-01

    By utilizing high resolution observations of nearly co-temporal and co-spatial SOT spectropolarimeter and XRT coronal X-ray data onboard Hinode, we revisit the contentious issue of the relationship between global magnetic quantities and coronal X-ray intensity. Co-aligned vector magnetogram and X-ray data are used for this study. We find that there is no pixel-to-pixel correlation between the observed loop brightness and magnetic quantities. However, the X-ray brightness is well correlated with the integrated magnetic quantities such as total unsigned magnetic flux, total unsigned vertical current, area integrated square of the vertical magnetic field and horizontal magnetic fields. Comparing all these quantities we find that the total magnetic flux correlates well with the observed integrated X-ray brightness, though there is some differences in the strength of the correlation when we use the X-ray data from different filters. While we get a good correlation between X-ray brightness and total unsigned vertic...

  16. Novel high refractive index, thermally conductive additives for high brightness white LEDs

    Science.gov (United States)

    Hutchison, Richard Stephen

    In prior works the inclusion of nanoparticle fillers has typically been shown to increase the thermal conductivity or refractive index of polymer nanocomposites separately. High refractive index zirconia nanoparticles have already proved their merit in increasing the optical efficiency of encapsulated light emitting diodes. However, the thermal properties of zirconia-silicone nanocomposites have yet to be investigated. While phosphor-converted light emitting diodes are at the forefront of solid-state lighting technologies for producing white light, they are plagued by efficiency losses due to excessive heating at the semiconductor die and in and around the phosphor particles, as well as photon scattering losses in the phosphor layer. It would then be of great interest if the high refractive index nanoparticles were found to both be capable of increasing the refractive index, thus reducing the optical scattering, and also the thermal conductivity, channeling more heat away from the LED die and phosphors, mitigating efficiency losses from heat. Thermal conductance measurements on unfilled and nanoparticle loaded silicone samples were conducted to quantify the effect of the zirconia nanoparticle loading on silicone nanocomposite thermal conductivity. An increase in thermal conductivity from 0.27 W/mK to 0.49 W/mK from base silicone to silicone with 33.5 wt% zirconia nanoparticles was observed. This trend closely mirrored a basic rule of mixtures prediction, implying a further enhancement in thermal conductivity could be achieved at higher nanoparticle loadings. The optical properties of transparency and light extraction efficiency of these composites were also investigated. While overall the zirconia nanocomposite showed good transparency, there was a slight decrease at the shorter wavelengths with increasing zirconia content. For longer wavelength LEDs, such as green or red, this might not matter, but phosphor-converted white LEDs use a blue LED as the photon source

  17. Characteristics of a high brightness gaseous field ion source employing tungsten-carbon doped NiAl needles

    Energy Technology Data Exchange (ETDEWEB)

    Mousa, Marwan S., E-mail: mmousa@mutah.edu.jo [Department of Physics, Mu' tah University, P.O. Box 7, Al-Karak (Jordan)

    2011-05-15

    We report on the characterization of a high brightness gaseous field ion source using an emitter made of a NiAl needle containing tiny spherical tungsten-carbon precipitates. By field evaporation of such a multiphase alloy, a surface protrusion is formed out of a precipitate, which can act as a small source size field ion emitter. The emission current-voltage characteristics of this emitter were recorded for a variety of parameters. The results obtained suggest that its application as a stable ion source is possible even on long term operation. -- Research highlights: {yields} High brightness gaseous field ion source of precipitation hardened NiAl+W+C emitter. {yields} Emission current-voltage characteristics are recorded for a variety of parameters. {yields} Very small virtual source sizes and energy spreads can be attained. {yields} Results suggest that application as long term stable ion source is possible.

  18. High brightness laser-diode device emitting 500 W from a 200 μm/NA0.22 fiber

    Science.gov (United States)

    Junhong, Yu; Linhui, Guo; Hualing, Wu; Zhao, Wang; Hao, Tan; Songxin, Gao; Deyong, Wu; Kai, Zhang

    2016-06-01

    A practical method of achieving high brightness and high power fiber-coupled laser-diode device is demonstrated both by experiment and ZEMAX software simulation, which is obtained by technologies of precision beam collimation, free space beam combining and polarization beam combining based on mini-bar diode laser chip. Using this method, fiber-coupled laser-diode module output power from the multimode fiber with 200 μm core diameter and 0.22 numerical aperture (NA) could reach 528 W, equalizing brightness is 11.0 MW/(cm2 sr) and electro-optical efficiency (defined as fiber output power divided by voltage and current of the module) is 43.0%. By this method, much wider applications of fiber-coupled laser-diode are anticipated.

  19. Heat dissipation performance of a high-brightness LED package assembly using high-thermal conductivity filler.

    Science.gov (United States)

    Yung, K C; Liem, H; Choy, H S

    2013-12-10

    This paper presents a thermal analysis and experimental validation of natural convective heat transfer of a high-brightness light-emitting diode (LED) package assembly. The substrate materials used in the LED package assembly were filled and doped using boron nitride (BN) filler. The thermal conductivity of the BN-filled substrate was measured. The temperature distribution and heat flow of the LED package were assessed by thermal profile measurement using an infrared (IR) camera and thermocouples. In addition, the heat transfer process of the LED package assembly in natural convection was also simulated using the computational fluid dynamics method. The optical performance of the LED package was monitored and investigated with various filler contents. The heat conduction mechanism in the substrate was analyzed. IR thermogram showed that the BN-doped substrate could effectively lower the surface temperature of the LED package by 21.5°C compared with the traditional FR4 substrate. According to the IESNA LM 80 lifetime testing method, reduction in LED temperature can prolong the LED's lifetime by 19,000 h. The optical performance of the LED package assembly was also found to be improved significantly in lighting power by 10%. As a result, the overall heat dissipation capability of the LED package to the surrounding is enhanced, which improves the LED's efficacy.

  20. Beam dynamics in an initial part of a high Brightness electron linac

    CERN Document Server

    Ayzatsky, M I; Dovbnya-Kushnir, V A

    2001-01-01

    The paper is focused on problems of obtained a bright electron beam in a system that includes a grid-controlled electron gun,a klystron type type subharmonical buncher, a standing wave fundamental buncher with increasing accelerating field and a short travelling wave accelerating section. Beam focusing is provided by a longitudinal solenoidal magnetic field.It was shown that the proposed system can provide electron bunches with a peak current more than 100 A and normalized r.m.s. emittance no more than phi centre dot mm centre dot mrad.

  1. Smart light random memory sprays Retinex: a fast Retinex implementation for high-quality brightness adjustment and color correction.

    Science.gov (United States)

    Banić, Nikola; Lončarić, Sven

    2015-11-01

    Removing the influence of illumination on image colors and adjusting the brightness across the scene are important image enhancement problems. This is achieved by applying adequate color constancy and brightness adjustment methods. One of the earliest models to deal with both of these problems was the Retinex theory. Some of the Retinex implementations tend to give high-quality results by performing local operations, but they are computationally relatively slow. One of the recent Retinex implementations is light random sprays Retinex (LRSR). In this paper, a new method is proposed for brightness adjustment and color correction that overcomes the main disadvantages of LRSR. There are three main contributions of this paper. First, a concept of memory sprays is proposed to reduce the number of LRSR's per-pixel operations to a constant regardless of the parameter values, thereby enabling a fast Retinex-based local image enhancement. Second, an effective remapping of image intensities is proposed that results in significantly higher quality. Third, the problem of LRSR's halo effect is significantly reduced by using an alternative illumination processing method. The proposed method enables a fast Retinex-based image enhancement by processing Retinex paths in a constant number of steps regardless of the path size. Due to the halo effect removal and remapping of the resulting intensities, the method outperforms many of the well-known image enhancement methods in terms of resulting image quality. The results are presented and discussed. It is shown that the proposed method outperforms most of the tested methods in terms of image brightness adjustment, color correction, and computational speed.

  2. Much Ado about Microbunching: Coherent Bunching in High Brightness Electron Beams

    Energy Technology Data Exchange (ETDEWEB)

    Ratner, Daniel [Stanford Univ., CA (United States)

    2011-05-01

    The push to provide ever brighter coherent radiation sources has led to the creation of correspondingly bright electron beams. With billions of electrons packed into normalized emittances (phase space) below one micron, collective effects may dominate both the preservation and use of such ultra-bright beams. An important class of collective effects is due to density modulations within the bunch, or microbunching. Microbunching may be deleterious, as in the case of the Microbunching Instability (MBI), or it may drive radiation sources of unprecedented intensity, as in the case of Free Electron Lasers (FELs). In this work we begin by describing models of microbunching due to inherent beam shot noise, which sparks both the MBI as well as SLAC's Linac Coherent Light Source, the world's first hard X-ray laser. We first use this model to propose a mechanism for reducing the inherent beam shot noise as well as for predicting MBI effects. We then describe experimental measurements of the resulting microbunching at LCLS, including optical radiation from the MBI, as well as the first gain length and harmonic measurements from a hard X-ray FEL. In the final chapters, we describe schemes that use external laser modulations to microbunch light sources of the future. In these sections we describe coherent light source schemes for both both linacs and storage rings.

  3. High-brightness switchable multi-wavelength remote laser in air

    CERN Document Server

    Yao, Jinping; Xu, Huailiang; Li, Guihua; Chu, Wei; Ni, Jielei; Zhang, Haisu; Chin, See Leang; Cheng, Ya; Xu, Zhizhan

    2011-01-01

    Remote laser in air based on amplified spontaneous emission (ASE) has produced rather well-collimated coherent beams in both backward and forward propagation directions, opening up possibilities for new remote sensing approaches. The remote ASE-based lasers were shown to enable operation either at ~391 and 337 nm using molecular nitrogen or at ~845 nm using molecular oxygen as gain medium, depending on the employed pump lasers. To date, a multi-wavelength laser in air that allows for dynamically switching the operating wavelength has not yet been achieved, although this type of laser is certainly of high importance for detecting multiple hazard gases. In this Letter, we demonstrate, for the first time to our knowledge, a harmonic-seeded switchable multi-wavelength laser in air driven by intense mid-infrared femtosecond laser pulses. Furthermore, population inversion in the multi-wavelength remote laser occurs at an ultrafast time-scale (i.e., less than ~200 fs) owing to direct formation of excited molecular n...

  4. The influence of snow depth and surface air temperature on satellite-derived microwave brightness temperature. [central Russian steppes, and high plains of Montana, North Dakota, and Canada

    Science.gov (United States)

    Foster, J. L.; Hall, D. K.; Chang, A. T. C.; Rango, A.; Allison, L. J.; Diesen, B. C., III

    1980-01-01

    Areas of the steppes of central Russia, the high plains of Montana and North Dakota, and the high plains of Canada were studied in an effort to determine the relationship between passive microwave satellite brightness temperature, surface air temperature, and snow depth. Significant regression relationships were developed in each of these homogeneous areas. Results show that sq R values obtained for air temperature versus snow depth and the ratio of microwave brightness temperature and air temperature versus snow depth were not as the sq R values obtained by simply plotting microwave brightness temperature versus snow depth. Multiple regression analysis provided only marginal improvement over the results obtained by using simple linear regression.

  5. The SPARC project: a high-brightness electron beam source at LNF to drive a SASE-FEL experiment

    Energy Technology Data Exchange (ETDEWEB)

    Alesini, D.; Bertolucci, S.; Biagini, M.E.; Biscari, C.; Boni, R.; Boscolo, M.; Castellano, M.; Clozza, A.; Di Pirro, G.; Drago, A.; Esposito, A.; Ferrario, M. E-mail: massimo.ferrario@lnf.infn.it; Fusco, V.; Gallo, A.; Ghigo, A.; Guiducci, S.; Incurvati, M.; Laurelli, P.; Ligi, C.; Marcellini, F.; Migliorati, M.; Milardi, C.; Palumbo, L.; Pellegrino, L.; Preger, M.; Raimondi, P.; Ricci, R.; Sanelli, C.; Sgamma, F.; Spataro, B.; Serio, M.; Stecchi, A.; Stella, A.; Tazzioli, F.; Vaccarezza, C.; Vescovi, M.; Vicario, C.; Zobov, M.; Acerbi, E.; Alessandria, F.; Barni, D.; Bellomo, G.; Boscolo, I.; Broggi, F.; Cialdi, S.; DeMartinis, C.; Giove, D.; Maroli, C.; Petrillo, V.; Rome' , M.; Serafini, L.; Chiadroni, E.; Felici, G.; Levi, D.; Mastrucci, M.; Mattioli, M.; Medici, G.; Petrarca, G.S.; Catani, L.; Cianchi, A.; D' Angelo, A.; Di Salvo, R.; Fantini, A.; Moricciani, D.; Schaerf, C.; Bartolini, R.; Ciocci, F.; Dattoli, G.; Doria, A.; Flora, F.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Mezi, L.; Ottaviani, P.L.; Picardi, L.; Quattromini, M.; Renieri, A.; Ronsivalle, C.; Avaldi, L.; Carbone, C.; Cricenti, A.; Pifferi, A.; Perfetti, P.; Prosperi, T.; Albertini, V. Rossi; Quaresima, C.; Zema, N

    2003-07-11

    The Project Sorgente Pulsata e Amplificata di Radiazione Coerente (SPARC), proposed by a collaboration among ENEA-INFN-CNR-Universita' di Tor Vergata-INFM-ST, was recently approved by the Italian Government and will be built at LNF. The aim of the project is to promote an R and D activity oriented to the development of a coherent ultra-brilliant X-ray source in Italy. This collaboration has identified a program founded on two main issues: the generation of ultra-high peak brightness electron beams and of resonant higher harmonics in the SASE-FEL process, as presented in this paper.

  6. Electro-optical characteristics of a chiral hybrid in-plane switching liquid crystal mode for high brightness.

    Science.gov (United States)

    Gwag, Jin Seog; Sohn, Kyunghwa; Kim, Young-Ki; Kim, Jae-Hoon

    2008-08-04

    We propose a new in-plane switching (IPS) nematic liquid crystal (LC) mode which uses a twist effect with a hybrid LC alignment and interdigitated electrodes as an approach for a high brightness. This is optimized to a normally white mode to minimize loss of transmittance at the electrode compared to the conventional IPS mode. The proposed mode shows an excellent dark state because the bulk LCs are aligned in parallel to the optic axis of the polarizer under low electric fields. Consequently, this proposed mode exhibits a much higher contrast ratio (980:1) than that of the conventional IPS mode (550:1).

  7. Operational experience on the generation and control of high brightness electron bunch trains at SPARC-LAB

    Science.gov (United States)

    Mostacci, A.; Alesini, D.; Anania, M. P.; Bacci, A.; Bellaveglia, M.; Biagioni, A.; Cardelli, F.; Castellano, Michele; Chiadroni, Enrica; Cianchi, Alessandro; Croia, M.; Di Giovenale, Domenico; Di Pirro, Giampiero; Ferrario, Massimo; Filippi, Francesco; Gallo, Alessandro; Gatti, Giancarlo; Giribono, Anna; Innocenti, L.; Marocchino, A.; Petrarca, M.; Piersanti, L.; Pioli, S.; Pompili, Riccardo; Romeo, Stefano; Rossi, Andrea Renato; Shpakov, V.; Scifo, J.; Vaccarezza, Cristina; Villa, Fabio; Weiwei, L.

    2015-05-01

    Sub-picosecond, high-brightness electron bunch trains are routinely produced at SPARC-LAB via the velocity bunching technique. Such bunch trains can be used to drive multi-color Free Electron Lasers (FELs) and plasma wake field accelerators. In this paper we present recent results at SPARC-LAB on the generation of such beams, highlighting the key points of our scheme. We will discuss also the on-going machine upgrades to allow driving FELs with plasma accelerated beams or with short electron pulses at an increased energy.

  8. NOAA Climate Data Record (CDR) of Intersatellite Calibrated Clear-Sky High Resolution Infrared Radiation Sounder (HIRS) Channel 12 Brightness Temperature Version 3

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — The High-Resolution Infrared Radiation Sounder (HIRS) of intersatellite calibrated channel 12 brightness temperature (TB) product is a gridded global monthly time...

  9. Building block diode laser concept for high brightness laser output in the kW range and its applications

    Science.gov (United States)

    Ferrario, Fabio; Fritsche, Haro; Grohe, Andreas; Hagen, Thomas; Kern, Holger; Koch, Ralf; Kruschke, Bastian; Reich, Axel; Sanftleben, Dennis; Steger, Ronny; Wallendorf, Till; Gries, Wolfgang

    2016-03-01

    The modular concept of DirectPhotonics laser systems is a big advantage regarding its manufacturability, serviceability as well as reproducibility. By sticking to identical base components an economic production allows to serve as many applications as possible while keeping the product variations minimal. The modular laser design is based on single emitters and various combining technics. In a first step we accept a reduction of the very high brightness of the single emitters by vertical stacking several diodes in fast axis. This can be theoretically done until the combined fast axis beam quality is on a comparable level as the individual diodes slow axis beam quality without loosing overall beam performance after fiber coupling. Those stacked individual emitters can be wavelength stabilized by an external resonator, providing the very same feedback to each of those laser diodes which leads to an output power of about 100 W with BPP of stacking those building blocks using the very same dense spectral combing technique up to multi kW Systems without further reduction of the BPP. The 500 W building blocks are consequently designed in a way that they feature a high flexibility with regard to their emitting wavelength bandwidth. Therefore, new wavelengths can be implemented by only exchanging parts and without any additional change of the production process. This design principal theoretically offers the option to adapt the wavelength of those blocks to any applications, from UV, visible into the far IR as long as there are any diodes commercially available. This opens numerous additional applications like laser pumping, scientific applications, materials processing such as cutting and welding of copper aluminum or steel and also medical application. Typical operating at wavelengths in the 9XX nm range, these systems are designed for and mainly used in cutting and welding applications, but adapted wavelength ranges such as 793 nm and 1530 nm are also offered. Around 15

  10. Liquid crystal displays with high brightness of visualization versus active displays

    Science.gov (United States)

    Olifierczuk, Marek; Zieliński, Jerzy

    2007-05-01

    Nowadays Liquid Crystal Displays (LCD) takes the very important place among different visualization devices. It's are used in many standard applications such as computer or video screens. In May 2006, 100" LCD TV monitor had been shown by LG. But beside of this main direction of display development, very interesting - because of insignificant electro-magnetic disturbances - is the possibility of it's applications in motorization and aviation. An example of it can be a glass cockpit of U2 , Boeing 777 or many different car dashboards. On this field beside LCD we have now many another display technologies, but interesting for us are 3 of them: FEDs (Field Emission Displays), OLEDs (Organic Light Emitting Diode), PLEDs (Polymer Light Emitting Diode). The leading position of LCD is a result of LCD unique advantages of flat form, weight, power consumption, and reliability, higher (than CRT) luminance, luminance uniformity, sunlight readability, wide dimming range, fault tolerance and a large active display area with a small border. The basis of starting our investigation was the comparison of passive LCD and the other technology, which can be theoretically used on motorization and aviation field. The following parameters are compared: contrast ratio, luminance level, temperature stability, life-time, operating temperature range, color performance, and depth, viewing cone, technology maturity, availability and cost. In our work an analysis of Liquid Crystal Displays used in specific applications is done. The possibilities of the applications such a display under high lighting level are presented. The presented results of this analysis are obtained from computer program worked by authors, which makes it possible to calculate the optical parameters of transmissive and reflective LCD working in quasi-real conditions. The base assumption of this program are shown. This program calculate the transmission and reflection coefficient of a display taking into account the

  11. Through the Looking Glass: Bright, Highly Magnified Galaxy Candidates at z ~ 7 behind A1703

    Science.gov (United States)

    Bradley, L. D.; Bouwens, R. J.; Zitrin, A.; Smit, R.; Coe, D.; Ford, H. C.; Zheng, W.; Illingworth, G. D.; Benítez, N.; Broadhurst, T. J.

    2012-03-01

    We report the discovery of seven strongly lensed Lyman-break galaxy (LBG) candidates at z ~ 7 detected in Hubble Space Telescope Wide Field Camera 3 (WFC3) imaging of A1703. The brightest candidate, called A1703-zD1, has an observed (lensed) magnitude of 24.0 AB (26σ) in the WFC3/IR F160W band, making it 0.2 mag brighter than the z 850-dropout candidate recently reported behind the Bullet Cluster and 0.7 mag brighter than the previously brightest known z ~ 7.6 galaxy, A1689-zD1. With a cluster magnification of ~9, this source has an intrinsic magnitude of H 160 = 26.4 AB, a strong z 850 - J 125 break of 1.7 mag, and a photometric redshift of z ~ 6.7. Additionally, we find six other bright LBG candidates with H 160-band magnitudes of 24.9-26.4, photometric redshifts z ~ 6.4 - 8.8, and magnifications μ ~ 3-40. Stellar population fits to the Advanced Camera for Surveys, WFC3/IR, and Spitzer/Infrared Array Camera data for A1703-zD1 and A1703-zD4 yield stellar masses (0.7 - 3.0) × 109 M ⊙, stellar ages 5-180 Myr, and star formation rates ~7.8 M ⊙ yr-1, and low reddening with AV <= 0.7. The source-plane reconstruction of the exceptionally bright candidate A1703-zD1 exhibits an extended structure, spanning ~4 kpc in the z ~ 6.7 source plane, and shows three resolved star-forming knots of radius r ~ 0.4 kpc. Based on observations made with the NASA/ESA Hubble Space Telescope, obtained at the Space Telescope Science Institute, which is operated by the Association of Universities for Research in Astronomy under NASA contract NAS5-26555. Based on observations made with the Spitzer Space Telescope, which is operated by the Jet Propulsion Laboratory, California Institute of Technology under NASA contract 1407.

  12. Developing a bright 17 keV x-ray source for probing high-energy-density states of matter at high spatial resolution

    Energy Technology Data Exchange (ETDEWEB)

    Huntington, C. M.; Park, H.-S.; Maddox, B. R.; Barrios, M. A.; Benedetti, R.; Braun, D. G.; Landen, O. L.; Wehrenberg, C. E.; Remington, B. A. [Lawrence Livermore National Laboratory, Livermore, California, 94551 (United States); Hohenberger, M.; Regan, S. P. [Laboratory for Laser Energetics, University of Rochester, Rochester, New York 14623 (United States)

    2015-04-15

    A set of experiments were performed on the National Ignition Facility (NIF) to develop and optimize a bright, 17 keV x-ray backlighter probe using laser-irradiated Nb foils. High-resolution one-dimensional imaging was achieved using a 15 μm wide slit in a Ta substrate to aperture the Nb He{sub α} x-rays onto an open-aperture, time integrated camera. To optimize the x-ray source for imaging applications, the effect of laser pulse shape and spatial profile on the target was investigated. Two laser pulse shapes were used—a “prepulse” shape that included a 3 ns, low-intensity laser foot preceding the high-energy 2 ns square main laser drive, and a pulse without the laser foot. The laser spatial profile was varied by the use of continuous phase plates (CPPs) on a pair of shots compared to beams at best focus, without CPPs. A comprehensive set of common diagnostics allowed for a direct comparison of imaging resolution, total x-ray conversion efficiency, and x-ray spectrum between shots. The use of CPPs was seen to reduce the high-energy tail of the x-ray spectrum, whereas the laser pulse shape had little effect on the high-energy tail. The measured imaging resolution was comparably high for all combinations of laser parameters, but a higher x-ray flux was achieved without phase plates. This increased flux was the result of smaller laser spot sizes, which allowed us to arrange the laser focal spots from multiple beams and produce an x-ray source which was more localized behind the slit aperture. Our experiments are a first demonstration of point-projection geometry imaging at NIF at the energies (>10 keV) necessary for imaging denser, higher-Z targets than have previously been investigated.

  13. Through the Looking Glass: Bright, Highly Magnified Galaxies at z~7 Behind Abell 1703

    CERN Document Server

    Bradley, L D; Zitrin, A; Smit, R; Coe, D; Ford, H C; Zheng, W; Illingworth, G D; Benítez, N; Broadhurst, T J

    2011-01-01

    We report the discovery of eight strongly lensed Lyman break galaxy (LBG) candidates at z~7 detected in Hubble Space Telescope (HST) Wide Field Camera 3 (WFC3) imaging of Abell 1703. The brightest candidate, called A1703-zD1, has an observed (lensed) magnitude of 24.0 AB (26 sigma) in the WFC3/IR F160W band, making it 0.2 magnitudes brighter than the z_850-band dropout recently found behind the Bullet Cluster and 0.7 magnitudes brighter than the previously brightest known z~7.5 galaxy, A1689-zD1. With a cluster magnification of 9.0, this source has an intrinsic magnitude of H_160 = 26.4 AB, a strong J_125 - H_160 break of 1.7 magnitudes, and a photometric redshift of z~6.7. Additionally, we find seven other bright LBG candidates with H_160-band magnitudes of 24.9-26.4, photometric redshifts z~6.4 - 8.8, and magnifications mu~3-40. Stellar population fits to the ACS, WFC3/IR, and \\Spitzer/IRAC data for A1703-zD1 and A1703-zD4 yield stellar masses (0.7 - 3.0) x 10^{9} M_sun, stellar ages 5-180 Myr, and star-for...

  14. The LEGUE high latitude bright survey design for the LAMOST pilot survey

    Institute of Scientific and Technical Information of China (English)

    Yue-Yang Zhang; Shuang Gao; Norbert Christlieb; Zhan-Wen Han; Jin-Liang Hou; Hsu-Tai Lee; Xiao-Wei Liu; Kai-Ke Pan; Hong-Chi Wang; Jeffrey L.Carlin; Fan Yang; Chao Liu; Li-Cai Deng; Heidi Jo Newberg; Hao-Tong Zhang; Sébastien Lépine; Yan Xu

    2012-01-01

    We describe the footprint and input catalog for bright nights in the LAMOST Pilot Survey,which began in October 2011.Targets are selected from two stripes in the north and south Galactic Cap regions,centered at δ =29°,with 10° width in declination,covering right ascensions of 135°to 290°and-30°to 30°respectively.We selected spectroscopic targets from a combination of the SDSS and 2MASS point source catalogs.The catalog of stars defining the field centers(as required by the Shack-Hartmann wavefront sensor at the center of the LAMOST field)consists of all V < 8m stars from the Hipparcos catalog.We employ a statistical selection algorithm that assigns priorities to targets based on their positions in multidimensional color/magnitude space.This scheme overemphasizes rare objects and de-emphasizes more populated regions of magnitude and color phase space,while ensuring a smooth,well-understood selection function.A demonstration of plate design is presented based on the Shack-Hartmann star catalog and an input catalog that was generated by our target selection routines.

  15. Production and quality assurance of bright steel products for high performance components in fuel injection systems

    Energy Technology Data Exchange (ETDEWEB)

    Janssen, P.; Bodenstein, F. [Mittal Steel Ruhrort GmbH, Duisburg (Germany); Engineer, S. [EZM Edelstahlzieherei Mark, Wetter (Germany)

    2005-07-01

    In the last years the demands on the technological properties of steels in fuel injection systems are constantly increasing. There has been for instance a significant increase in the pressure of fuel injections systems. This means even small imperfections in steels can lead to field failures. The grades 47Pb2 and 42CrMo4 for fuel injection systems have stringent requirements regarding the production and application of the components. In order to obtain the best possible quality all stages of the production system have to be monitored very carefully. The steel making process in the steel plant has to follow strict rules to avoid detrimental oxide inclusions, reduce segregation, improve lead distribution, provide a good surface quality and homogeneous structure. The process of manufacturing bright steel bars from the hot rolled wire rods also involves capable processes with intensive 100% testing of all the bars supplied to the customer. The wire rods are drawn to bars and ground to narrow tolerances. The bars undergo an eddy current test to determine surface defects and also a sophisticated ultra sonic test at a flat bottom hole of 0.7. In spite of all the process monitoring and tests carried out from the melting up to grinding the bars there is still a chance of certain imperfection or defects remaining on the bars, which are more likely detectable on processing the bars to components. Therefore is also a necessity to carry out a test during the stage of component manufacturing. (orig.)

  16. Active Detection and Imaging of Nuclear Materials with High-Brightness Gamma Rays

    Energy Technology Data Exchange (ETDEWEB)

    Barty, C J; Gibson, D J; Albert, F; Anderson, S G; Anderson, G G; Betts, S M; Berry, R D; Fisher, S E; Hagmann, C A; Johnson, M S; Messerly, M J; Phan, H H; Semenov, V A; Shverdin, M Y; Tremaine, A M; Hartemann, F V; Siders, C W; McNabb, D P

    2009-02-26

    A Compton scattering {gamma}-ray source, capable of producing photons with energies ranging from 0.1 MeV to 0.9 MeV has been commissioned and characterized, and then used to perform nuclear resonance fluorescence (NRF) experiments. The performances of the two laser systems (one for electron production, one for scattering), the electron photoinjector, and the linear accelerator are also detailed, and {gamma}-ray results are presented. The key source parameters are the size (0.01 mm{sup 2}), horizontal and vertical divergence (6 x 10 mrad{sup 2}), duration (10 ps), spectrum and intensity (10{sup 5} photons/shot). These parameters are summarized by the peak brightness, 1.5 x 10{sup 15} photons/mm{sup 2}/mrad{sup 2}/s/0.1% bandwidth, measured at 478 keV. Additional measurements of the flux as a function of the timing difference between the drive laser pulse and the relativistic photo-electron bunch, {gamma}-ray beam profile, and background evaluations are presented. These results are systematically compared to theoretical models and computer simulations. NRF measurements performed on {sup 7}Li in LiH demonstrate the potential of Compton scattering photon sources to accurately detect isotopes in situ.

  17. Multi-kW high-brightness fiber coupled diode laser based on two dimensional stacked tailored diode bars

    Science.gov (United States)

    Bayer, Andreas; Unger, Andreas; Köhler, Bernd; Küster, Matthias; Dürsch, Sascha; Kissel, Heiko; Irwin, David A.; Bodem, Christian; Plappert, Nora; Kersten, Maik; Biesenbach, Jens

    2016-03-01

    The demand for high brightness fiber coupled diode laser devices in the multi kW power region is mainly driven by industrial applications for materials processing, like brazing, cladding and metal welding, which require a beam quality better than 30 mm x mrad and power levels above 3kW. Reliability, modularity, and cost effectiveness are key factors for success in the market. We have developed a scalable and modular diode laser architecture that fulfills these requirements through use of a simple beam shaping concept based on two dimensional stacking of tailored diode bars mounted on specially designed, tap water cooled heat sinks. The base element of the concept is a tailored diode laser bar with an epitaxial and lateral structure designed such that the desired beam quality in slow-axis direction can be realized without using sophisticated beam shaping optics. The optical design concept is based on fast-axis collimator (FAC) and slow-axis collimator (SAC) lenses followed by only one additional focusing optic for efficient coupling into a 400 μm fiber with a numerical aperture (NA) of 0.12. To fulfill the requirements of scalability and modularity, four tailored bars are populated on a reduced size, tap water cooled heat sink. The diodes on these building blocks are collimated simply via FAC and SAC. The building blocks can be stacked vertically resulting in a two-dimensional diode stack, which enables a compact design of the laser source with minimum beam path length. For a single wavelength, up to eight of these building blocks, implying a total of 32 tailored bars, can be stacked into a submodule, polarization multiplexed, and coupled into a 400 μm, 0.12NA fiber. Scalability into the multi kW region is realized by wavelength combining of replaceable submodules in the spectral range from 900 - 1100 nm. We present results of a laser source based on this architecture with an output power of more than 4 kW and a beam quality of 25 mm x mrad.

  18. High-brightness X-ray free-electron laser with an optical undulator by pulse shaping.

    Science.gov (United States)

    Chang, Chao; Liang, Jinyang; Hei, Dongwei; Becker, Michael F; Tang, Kelei; Feng, Yiping; Yakimenko, Vitaly; Pellegrini, Claudio; Wu, Juhao

    2013-12-30

    A normal-incident flattop laser with a tapered end is proposed as an optical undulator to achieve a high-gain and high-brightness X-ray free electron laser (FEL). The synchronic interaction of an electron bunch with the normal incident laser is realized by tilting the laser pulse front. The intensity of the flattop laser is kept constant during the interaction time of the electron bunch and the laser along the focal plane of a cylindrical lens. Optical shaping to generate the desired flattop pulse with a tapered end from an original Gaussian pulse distribution is designed and simulated. The flattop laser with a tapered end can enhance the X-ray FEL beyond the exponential growth saturation power by one order to reach 1 Gigawatt as compared to that without a tapered end. The peak brightness can reach 1030 photons/mm2/mrad2/s/0.1% bandwidth, more than 10 orders brighter than the conventional incoherent Thompson Scattering X-ray source.

  19. High brightness imaging system using vertical cavity surface-emitting laser micro-arrays- results and proposed enhancements

    Science.gov (United States)

    Mentzer, Mark A.; Ghosh, Chuni L.

    2011-05-01

    Laser illumination systems for high brightness imaging through the self-luminosity of explosive events, at Aberdeen Proving Ground and elsewhere, required complex pulse timing, extensive cooling, large-scale laser systems (frequencydoubled flash-pumped Nd:YAG, Cu-vapor, Q-switched ruby), making them difficult to implement for range test illumination in high speed videography. A Vertical Cavity Surface-Emitting Laser (VCSEL) array was designed and implemented with spectral filtering to effectively remove self-luminosity and the fireball from the image, providing excellent background discrimination in a variety of range test scenarios. Further improvements to the system are proposed for applications such as imaging through murky water or dust clouds with optimal penetration of obscurants.

  20. High-energy emission from bright gamma-ray bursts using Fermi

    Energy Technology Data Exchange (ETDEWEB)

    Bissaldi, Elisabetta

    2010-05-25

    mainly based on the brightest bursts detected by GBM inside the LAT field-of-view. The determination of a consistent sample for upper-limit calculations can be established by selecting those bursts which have a strong signal in the GBM BGO detectors. The structure of this thesis can be summarized as follows: The first chapter introduces the basic concepts and scientific background of GRB physics. Afterwards, instrumental details about the Fermi instruments LAT and GBM, as well as LAT performance and capabilities for GRB science are presented in chapter 2. Chapter 3 focuses on the detector-level calibration of the GBM instrument, and in particular on the analysis methods and results, which crucially support the development of a consistent GBM instrument response. The main GBM scientific results collected during the first year of operation are then presented in chapter 4. Particular emphasis is given to the description of joint GBM-LAT and GBM-Swift observations and analysis results. The last chapter presents the selection methodology and detailed spectral analysis of a sample of well-defined BGO-bright bursts detected by GBM during its first year. Using these results, correlations among spectral parameters are finally discussed. (orig.)

  1. Conceptual design of a high-brightness linac for soft X-ray SASE-FEL source

    Energy Technology Data Exchange (ETDEWEB)

    Alesini, D.; Bertolucci, S.; Biagini, M.E.; Biscari, C.; Boni, R.; Boscolo, M.; Castellano, M.; Clozza, A.; Pirro, G.D.G. Di; Drago, A.; Esposito, A.; Ferrario, M. E-mail: massimo.ferrario@lnf.infn.it; Fusco, V.; Gallo, A.; Ghigo, A.; Guiducci, S.; Incurvati, M.; Laurelli, P.; Ligi, C.; Marcellini, F.; Migliorati, M.; Milardi, C.; Palumbo, L.; Pellegrino, L.; Preger, M.; Raimondi, P.; Ricci, R.; Sanelli, C.; Sgamma, F.; Spataro, B.; Serio, M.; Stecchi, A.; Stella, A.; Tazzioli, F.; Vaccarezza, C.; Vescovi, M.; Vicario, C.; Zobov, M.; Acerbi, E.; Alessandria, F.; Barni, D.; Bellomo, G.; Birattari, C.; Bonardi, M.; Boscolo, I.; Bosotti, A.; Broggi, F.; Cialdi, S.; DeMartinis, C.; Giove, D.; Maroli, C.; Michelato, P.; Monaco, L.; Pagani, C.; Petrillo, V.; Pierini, P.; Serafini, L.; Sertore, D.; Volpini, G.; Chiadroni, E.; Felici, G.; Levi, D.; Mastrucci, M.; Mattioli, M.; Medici, G.; Petrarca, G.S.; Catani, L.; Cianchi, A.; D' Angelo, A.; Salvo, R.D.R. Di; Fantini, A.; Moricciani, D.; Schaerf, C.; Bartolini, R.; Ciocci, F.; Dattoli, G.; Doria, A.; Flora, F.; Gallerano, G.P.; Giannessi, L.; Giovenale, E.; Messina, G.; Mezi, L.; Ottaviani, P.L.; Picardi, L.; Quattromini, M.; Renieri, A.; Ronsivalle, C.; Avaldi, L.; Carbone, C.; Cricenti, A.; Pifferi, A.; Perfetti, P.; Prosperi, T.; Albertini, V.R.V. Rossi; Quaresima, C.; Zema, N

    2003-07-11

    FELs based on SASE are believed to be powerful tools to explore the frontiers of basic sciences, from physics to chemistry to biology. Intense R and D programs have started in the USA and Europe in order to understand the SASE physics and to prove the feasibility of these sources. The allocation of considerable resources in the Italian National Research Plan (PNR) brought about the formation of a CNR-ENEA-INFN-University of Roma 'Tor Vergata' study group. A conceptual design study has been developed and possible schemes for linac sources have been investigated, leading to the SPARX proposal. We report in this paper the results of a preliminary start to end simulation concerning one option we are considering based on an S-band normal conducting linac with high-brightness photoinjector integrated in an RF compressor.

  2. Nonlinear Dynamics of High-Brightness Electron Beams and Beam-Plasma Interactions: Theories, Simulations, and Experiments

    Energy Technology Data Exchange (ETDEWEB)

    C. L. Bohn (deceased), P. Piot and B. Erdelyi

    2008-05-31

    According to its original Statement of Work (SOW), the overarching objective of this project is: 'To enhance substantially the understanding of the fundamental dynamics of nonequilibrium high-brightness beams with space charge.' Our work and results over the past three and half years have been both intense and fruitful. Inasmuch as this project is inextricably linked to a larger, growing research program - that of the Beam Physics and Astrophysics Group (BPAG) - the progress that it has made possible cannot easily be separated from the global picture. Thus, this summary report includes major sections on 'global' developments and on those that can be regarded as specific to this project.

  3. High-Energy Density science with an ultra-bright x-ray laser

    Science.gov (United States)

    Glenzer, Siegfried

    2015-11-01

    This talk will review recent progress in high-energy density physics using the world's brightest x-ray source, the Linac Coherent Light Source, SLAC's free electron x-ray laser. These experiments investigate laser-driven matter in extreme conditions where powerful x-ray scattering and imaging techniques have been applied to resolve ionic interactions at atomic (Ångstrom) scale lengths and to visualize the formation of dense plasma states. Major research areas include dynamic compression experiments of solid targets to determine structural properties and to discover and characterize phase transitions at mega-bar pressures. A second area studies extreme fields produced by high-intensity radiation where fundamental questions of laboratory plasmas can be related to cosmological phenomena. Each of these areas takes advantage of the unique properties of the LCLS x-ray beam. They include small foci for achieving high intensity or high spatial resolution, high photon flux for dynamic structure factor measurements in single shots, and high spectral bandwidth to resolve plasmon (Langmuir) waves or ion acoustic waves in dense plasmas. We will further describe new developments of ultrafast pump-probe technique at high repetition rates. These include studies on dense cryogenic hydrogen that have begun providing fundamental insights into the physical properties of matter in extreme conditions that are important for astrophysics, fusion experiments and generation of radiation sources. This work was supported by DOE Office of Science, Fusion Energy Science under FWP 100182.

  4. High-quality electron beam generation and bright betatron radiation from a cascaded laser wakefield accelerator (Conference Presentation)

    Science.gov (United States)

    Liu, Jiansheng; Wang, Wentao; Li, Wentao; Qi, Rong; Zhang, Zhijun; Yu, Changhai; Wang, Cheng; Liu, Jiaqi; Qing, Zhiyong; Ming, Fang; Xu, Yi; Leng, Yuxin; Li, Ruxin; Xu, Zhizhan

    2017-05-01

    One of the major goals of developing laser wakefiled accelerators (LWFAs) is to produce compact high-energy electron beam (e-beam) sources, which are expected to be applied in developing compact x-ray free-electron lasers and monoenergetic gamma-ray sources. Although LWFAs have been demonstrated to generate multi-GeV e-beams, to date they are still failed to produce high quality e beams with several essential properties (narrow energy spread, small transverse emittance and high beam charge) achieved simultaneously. Here we report on the demonstration of a high-quality cascaded LWFA experimentally via manipulating electron injection, seeding in different periods of the wakefield, as well as controlling energy chirp for the compression of energy spread. The cascaded LWFA was powered by a 1-Hz 200-TW femtosecond laser facility at SIOM. High-brightness e beams with peak energies in the range of 200-600 MeV, 0.4-1.2% rms energy spread, 10-80 pC charge, and 0.2 mrad rms divergence are experimentally obtained. Unprecedentedly high 6-dimensional (6-D) brightness B6D,n in units of A/m2/0.1% was estimated at the level of 1015-16, which is very close to the typical brightness of e beams from state-of-the-art linac drivers and several-fold higher than those of previously reported LWFAs. Furthermore, we propose a scheme to minimize the energy spread of an e beam in a cascaded LWFA to the one-thousandth-level by inserting a stage to compress its longitudinal spatial distribution via velocity bunching. In this scheme, three-segment plasma stages are designed for electron injection, e-beam length compression, and e-beam acceleration, respectively. A one-dimensional theory and two-dimensional particle-in-cell simulations have demonstrated this scheme and an e beam with 0.2% rms energy spread and low transverse emittance could be generated without loss of charge. Based on the high-quality e beams generated in the LWFA, we have experimentally realized a new scheme to enhance the

  5. High Torque, Direct Drive Electric Motor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bear Engineering proposes to advance the development of an innovative high torque, low speed, direct drive motor in order to meet NASA's requirements for such...

  6. High Torque, Direct Drive Electric Motor Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Bear Engineering proposes to develop an innovative high torque, low speed, direct drive motor in order to meet NASA's requirements for such devices. Fundamentally,...

  7. Generation of Bright Phase-matched Circularly-polarized Extreme Ultraviolet High Harmonics

    Science.gov (United States)

    2014-12-08

    relation to local moments. Phys. Scr . 1993, 302 (1993). 7. Stöhr, J. et al. Element-specific magnetic microscopy with circularly polarized X-rays...Becker, W. & Kopold, R. Generation of circularly polarized high-order harmonics by two-color coplanar field mixing . Phys. Rev. A 61, 063403 (2000). 38...1995). 42. Eichmann, H. et al. Polarization-dependent high-order two-color mixing . Phys. Rev. A 51, R3414–R3417 (1995). 43. Fleischer, A., Kfir, O

  8. Submm-bright QSOs at z~2: signposts of co-evolution at high z

    CERN Document Server

    Carrera, F J; Page, M J; Symeonidis, M; Stevens, J A; Orjales, J M Cao

    2013-01-01

    We have assembled a sample of 5 X-ray and submm-luminous z~2 QSOs which are therefore both growing their central black holes through accretion and forming stars copiously at a critical epoch. Hence, they are good laboratories to investigate the co-evolution of star formation and AGN. We have performed a preliminary analysis of the AGN and SF contributions to their UV-to-FIR SEDs, fitting them with simple direct (disk), reprocessed (torus) and star formation components. All three are required by the data and hence we confirm that these objects are undergoing strong star formation in their host galaxies at rates 500-2000 Msun/y. Estimates of their covering factors are between about 30 and 90%. In the future, we will assess the dependence of these results on the particular models used for the components and relate their observed properties to the intrinsice of the central engine and the SF material, as well as their relevance for AGN-galaxy coevolution.

  9. Highly surface functionalized carbon nano-onions for bright light bioimaging

    Science.gov (United States)

    Frasconi, Marco; Maffeis, Viviana; Bartelmess, Juergen; Echegoyen, Luis; Giordani, Silvia

    2015-12-01

    Carbon-based nanomaterials functionalized with fluorescent and water-soluble groups have emerged as platforms for biological imaging because of their low toxicity and ability to be internalized by cells. The development of imaging probes based on carbon nanomaterials for biomedical studies requires the understanding of their biological response as well as the efficient and safety exposition of the nanomaterial to the cell compartment where it is designed to operate. Here, we present a fluorescent probe based on surface functionalized carbon nano-onions (CNOs) for biological imaging. The modification of CNOs by chemical oxidation of the defects on the outer shell of these carbon nanoparticles results in an extensive surface functionalization with carboxyl groups. We have obtained fluorescently labelled CNOs by a reaction involving the amide bond formation between fluoresceinamine and the carboxylic acids groups on the surface of the CNOs. The functionalized CNOs display high emission properties and dispersability in water due to the presence of high surface coverage of carboxylic acid groups that translate in an efficient fluorescent probe for in vitro imaging of HeLa cells, without significant cytotoxicity. The resulting nanomaterial represents a promising platform for biological imaging applications due to the high dispersability in water, its efficient internalization by cancer cells and localization in specific cell compartments.

  10. Micro-structure Engineering of InGaN/GaN Quantum Wells for High Brightness Light Emitting Devices

    KAUST Repository

    Shen, Chao

    2013-05-01

    With experimental realization of micro-structures, the feasibility of achieving high brightness, low efficiency droop blue LED was implemented based on InGaN/GaN micro-LED-pillar design. A significantly high current density of 492 A/cm2 in a 20 μm diameter (D) micro-LED-pillar was achieved, compared to that of a 200 μm diameter LED (20 A/cm2), both at 10 V bias voltage. In addition, an increase in sustained quantum efficiency from 70.2% to 83.7% at high injection current density (200 A/cm2) was observed in micro-LED-pillars in conjunction with size reduction from 80 μm to 20 μm. A correlation between the strain relief and the electrical performance improvement was established for micro-LED-pillars with D < 50 μm, apart from current spreading effect. The degree of strain relief and its distribution were further studied in micro-LED-pillars with D ranging from 1 μm to 15 μm. Significant wavenumbers down-shifts for E2 and A1 Raman peaks, together with the blue shifted PL peak emission, were observed in as-prepared pillars, reflecting the degree of strain relief. A sharp transition from strained to relaxed epitaxy region was discernible from the competing E2 phonon peaks at 572 cm-1 and 568 cm-1, which were attributed to strain residue and strain relief, respectively. A uniform strain relief at the center of micro-pillars was achieved, i.e. merging of the competing phonon peaks, after Rapid Thermal Annealing (RTA) at 950℃ for 20 seconds, 4 phenomenon of which was observed for the first time. The transition from maximum strain relief to a uniform strain relief was found along the narrow circumference (< 2.5 μm) of the pillars from the line-map of Raman spectroscopy. The extent of strain relief is also examined considering the height (L) of micro-LED-pillars fabricated using FIB micro-machining technique. The significant strain relief of up to 70% (from -1.4 GPa to -0.37 GPa), with a 71 meV PL peak blue shift, suggested that micro-LED-pillar with D < 3 μm and

  11. Bright Prawns

    Institute of Scientific and Technical Information of China (English)

    1995-01-01

    Ingredients: 750 grams of prawns Supplementary ingredients: eggs, ginger, salt, wine and haw jam Directions: 1. Cut off the antennae and devein prawns. Cut off heads and tails. Marinate the prawns in wine.

  12. Development of a low-energy, high-brightness $\\mu^+$ beam line

    CERN Document Server

    Eggenberger, A; Wichmann, G

    2016-01-01

    We are developing a beam line which compresses the phase space of a standard surface $\\mu^+$ beam by 10 orders of magnitude with an efficiency of $10^{-3}$. Phase space compression occurs in a He gas target and consists of three consecutive stages: Transverse (perpendicular to the beam axis) compression, longitudinal compression and re-extraction into vacuum. Transverse compression was observed for the first time and longitudinal compression has been measured to occur within 2.5 $\\mu$s with high efficiency.

  13. A high-brightness source of polarization-entangled photons optimized for applications in free space

    CERN Document Server

    Steinlechner, Fabian; Jofre, Marc; Weier, Henning; Perez, Daniel; Jennewein, Thomas; Ursin, Rupert; Rarity, John; Mitchell, Morgan W; Torres, Juan P; Weinfurter, Harald; Pruneri, Valerio; 10.1364/OE.20.009640

    2012-01-01

    We present a simple but highly efficient source of polarization-entangled photons based on spontaneous parametric down-conversion (SPDC) in bulk periodically poled potassium titanyl phosphate crystals (PPKTP) pumped by a 405 nm laser diode. Utilizing one of the highest available nonlinear coefficients in a non-degenerate, collinear type-0 phase-matching configuration, we generate polarization entanglement via the crossed-crystal scheme and detect 0.64 million photon pair events/s/mW, while maintaining an overlap fidelity with the ideal Bell state of 0.98 at a pump power of 0.025 mW.

  14. Effects of Laser Pulse Heating of Copper Photocathodes on High-brightness Electron Beam Production at Blowout Regime

    CERN Document Server

    Zheng, Lianmin; Tang, Chuanxiang; Gai, Wei

    2016-01-01

    Producing high-brightness and high-charge (>100 pC) electron bunches at blowout regime requires ultrashort laser pulse with high fluence. The effects of laser pulse heating of the copper photocathode are analyzed in this paper. The electron and lattice temperature is calculated using an improved two-temperature model, and an extended Dowell-Schmerge model is employed to calculate the thermal emittance and quantum efficiency. A time-dependent growth of the thermal emittance and the quantum efficiency is observed. For a fixed amount of charge, the projected thermal emittance increases with the decreasing laser radius, and this effect should be taken into account in the laser optimization at blowout regime. Moreover, laser damage threshold fluence is simulated, showing that the maximum local fluence should be less than 40 mJ/cm^2 to prevent damage to the cathode. The cryogenic effect on the laser pulse heating is studied, showing that the hazards caused by the laser pulse heating will be significantly mitigated ...

  15. Deep-red polymer dots with bright two-photon fluorescence and high biocompatibility for in vivo mouse brain imaging

    Science.gov (United States)

    Alifu, Nuernisha; Sun, Zezhou; Zebibula, Abudureheman; Zhu, Zhenggang; Zhao, Xinyuan; Wu, Changfeng; Wang, Yalun; Qian, Jun

    2017-09-01

    With high contrast and deep penetration, two-photon fluorescence (2PF) imaging has become one of the most promising in vivo fluorescence imaging techniques. To obtain good imaging contrast, fluorescent nanoprobes with good 2PF properties are highly needed. In this work, bright 2PF polymer dots (P dots) were applied for in vivo mouse brain imaging. Deep-red emissive P dots with PFBT as the donor and PFDBT5 as the acceptor were synthesized and used as a contrast agent. P dots were further encapsulated by poly(styrene-co-maleic anhydride) (PSMA) and grafted with poly(ethylene glycol) (PEG). The P dots-PEG exhibit large two-photon absorption (2PA) cross-sections (δ≥8500 g), good water dispersibility, and high biocompatibility. P dots-PEG was further utilized first time for in vivo vascular imaging of mouse ear and brain, under 690-900 nm femtosecond (fs) laser excitation. Due to the large 2PA cross-section and deep-red emission, a large imaging depth ( 720 μm) was achieved.

  16. Development of Deep Penetration Welding Technology with High Brightness Laser under Vacuum

    Science.gov (United States)

    Katayama, Seiji; Yohei, Abe; Mizutani, Masami; Kawahito, Yousuke

    The authors have developed a new chamber for laser welding under the low vacuum conditions achieved by using rotary pumps. High-power disk laser bead-on-plate welding was performed on Type 304 stainless steel or A5052 aluminium alloy plate at the powers of 10, 16 and 26 kW at various welding speeds under low vacuum. The sound welds of more than 50 and 70 mm in penetration depth could be produced in Type 304 at the pressure of 0.1 kPa, the speed of 0.3 m/min and the power of 16 kW and 26 kW, respectively. Similar penetration was achieved in A 5052 aluminum alloy. Welding phenomena under low vacuum were also understood by observing the behavior of a keyhole inlet, a molten pool, melt flows and a plume ejected from a keyhole through high speed video cameras. Low interaction between a laser beam and a plume under low vacuum was confirmed by using probe laser beam method.

  17. High brightness laser source based on polarization coupling of two diode lasers with asymmetric feedback

    DEFF Research Database (Denmark)

    Thestrup, B.; Chi, M.; Sass, B.

    2003-01-01

    In this letter, we show that polarization coupling and asymmetric diode-laser feedback can be used to combine two diode-laser beams with low spatial coherence into a single beam with high spatial coherence. The coupled laser source is based on two similar laser systems each consisting of a 1 mumx......200 mum broad area laser diode applied with a specially designed feedback circuit. When operating at two times threshold, 50% of the freely running system output power is obtained in a single beam with an M-2 beam quality factor of 1.6+/-0.1, whereas the M-2 values of the two freely running diode...... lasers are 29+/-1 and 34+/-1, respectively. (C) 2003 American Institute of Physics....

  18. The brightness of colour.

    Directory of Open Access Journals (Sweden)

    David Corney

    Full Text Available BACKGROUND: The perception of brightness depends on spatial context: the same stimulus can appear light or dark depending on what surrounds it. A less well-known but equally important contextual phenomenon is that the colour of a stimulus can also alter its brightness. Specifically, stimuli that are more saturated (i.e. purer in colour appear brighter than stimuli that are less saturated at the same luminance. Similarly, stimuli that are red or blue appear brighter than equiluminant yellow and green stimuli. This non-linear relationship between stimulus intensity and brightness, called the Helmholtz-Kohlrausch (HK effect, was first described in the nineteenth century but has never been explained. Here, we take advantage of the relative simplicity of this 'illusion' to explain it and contextual effects more generally, by using a simple Bayesian ideal observer model of the human visual ecology. We also use fMRI brain scans to identify the neural correlates of brightness without changing the spatial context of the stimulus, which has complicated the interpretation of related fMRI studies. RESULTS: Rather than modelling human vision directly, we use a Bayesian ideal observer to model human visual ecology. We show that the HK effect is a result of encoding the non-linear statistical relationship between retinal images and natural scenes that would have been experienced by the human visual system in the past. We further show that the complexity of this relationship is due to the response functions of the cone photoreceptors, which themselves are thought to represent an efficient solution to encoding the statistics of images. Finally, we show that the locus of the response to the relationship between images and scenes lies in the primary visual cortex (V1, if not earlier in the visual system, since the brightness of colours (as opposed to their luminance accords with activity in V1 as measured with fMRI. CONCLUSIONS: The data suggest that perceptions

  19. Systematic search for VHE gamma-ray emission from X-ray bright high-frequency BL Lac objects

    CERN Document Server

    Albert, J

    2007-01-01

    Motivated by the fact that all but two (M87, BL Lac) extragalactic sources detected so far at VHE energies belong to the so-called HBL class of high-frequency peaked BL Lac objects, a systematic scan of the compilation of X-ray blazars by Donato et al. (2001) has been performed using the MAGIC telescope. The observations took place from December 2004 to March 2006 and cover sources on the northern sky visible under small zenith distances zd 2uJy) sources emitting at least the same energy flux at 200GeV as at 1keV. In order to avoid strong gamma-ray attenuation close to the energy threshold, the redshift of the sources was constrained to values z < 0.3. Of the 14 sources observed, 1ES 1218+30.4 (for the first time at very high energies) and 1ES 2344+51.4 (strong detection in a low flux state) have been detected in addition to the known bright TeV blazars Mrk 421 and Mrk 501. For the remaining sources, we present here the 99% confidence level upper limits on the integral flux above ~200GeV. A marginal exces...

  20. 1.9 W yellow, CW, high-brightness light from a high efficiency semiconductor laser-based system

    Science.gov (United States)

    Hansen, A. K.; Christensen, M.; Noordegraaf, D.; Heist, P.; Papastathopoulos, E.; Loyo-Maldonado, V.; Jensen, O. B.; Stock, M. L.; Skovgaard, P. M. W.

    2017-02-01

    Semiconductor lasers are ideal sources for efficient electrical-to-optical power conversion and for many applications where their small size and potential for low cost are required to meet market demands. Yellow lasers find use in a variety of bio-related applications, such as photocoagulation, imaging, flow cytometry, and cancer treatment. However, direct generation of yellow light from semiconductors with sufficient beam quality and power has so far eluded researchers. Meanwhile, tapered semiconductor lasers at near-infrared wavelengths have recently become able to provide neardiffraction- limited, single frequency operation with output powers up to 8 W near 1120 nm. We present a 1.9 W single frequency laser system at 562 nm, based on single pass cascaded frequency doubling of such a tapered laser diode. The laser diode is a monolithic device consisting of two sections: a ridge waveguide with a distributed Bragg reflector, and a tapered amplifier. Using single-pass cascaded frequency doubling in two periodically poled lithium niobate crystals, 1.93 W of diffraction-limited light at 562 nm is generated from 5.8 W continuous-wave infrared light. When turned on from cold, the laser system reaches full power in just 60 seconds. An advantage of using a single pass configuration, rather than an external cavity configuration, is increased stability towards external perturbations. For example, stability to fluctuating case temperature over a 30 K temperature span has been demonstrated. The combination of high stability, compactness and watt-level power range means this technology is of great interest for a wide range of biological and biomedical applications.

  1. High brightness microwave lamp

    Science.gov (United States)

    Kirkpatrick, Douglas A.; Dolan, James T.; MacLennan, Donald A.; Turner, Brian P.; Simpson, James E.

    2003-09-09

    An electrodeless microwave discharge lamp includes a source of microwave energy, a microwave cavity, a structure configured to transmit the microwave energy from the source to the microwave cavity, a bulb disposed within the microwave cavity, the bulb including a discharge forming fill which emits light when excited by the microwave energy, and a reflector disposed within the microwave cavity, wherein the reflector defines a reflective cavity which encompasses the bulb within its volume and has an inside surface area which is sufficiently less than an inside surface area of the microwave cavity. A portion of the reflector may define a light emitting aperture which extends from a position closely spaced to the bulb to a light transmissive end of the microwave cavity. Preferably, at least a portion of the reflector is spaced from a wall of the microwave cavity. The lamp may be substantially sealed from environmental contamination. The cavity may include a dielectric material is a sufficient amount to require a reduction in the size of the cavity to support the desired resonant mode.

  2. Evolution and constrains in the star formation histories of IR-bright star forming galaxies at high redshift

    Science.gov (United States)

    Sklias, Panos; Schaerer, Daniel; Elbaz, David

    2015-08-01

    Understanding and constraining the early cosmic star formation history of the Universe is a key question of galaxy evolution. A large fraction of star formation is dust obscured, so it is crucial to have access to the IR emission of galaxies to properly study them.Utilizing the multi-wavelength photometry from GOODS-Herschel, we perform SED fitting with different variable star formation histories (SFHs), which we constrain thanks to the observed IR luminosities, on a large sample of individually IR-detected sources from z~1 to 4. We explore how (and to which extent) constraining dust attenuation thanks to the IR luminosities allows to reduce the scatter (expected when using variable SFHs, in contrast to IR+UV standard calibrations) in physical properties and relations such as mass-SFR and the so-called star-forming Main Sequence (MS).Although limited at the high-z end, our analysis shows a change of trends in SFHs between low and high z, that follows the established cosmic SFR density, with galaxies found to prefer rising SFRs at z~3-4, and declining SFRs at z≤1. We show that a fraction of galaxies (~20%), mainly at z≤2, can have lower SFRs than IR-inferred, but still being compatible with the observations, indicative of being post-starbursts/undergoing quenching while bright in the IR, in agreement with theoretical work. The IR-constrained stellar population models we obtain also indicate that the two main modes of star formation - MS and starburst - evolve differently with time, with the former being mostly slow evolving and lying on the MS for long lasting periods, and the latter being very recent, rapidly increasing bursts (or on the decline, when belonging to the aforementioned "quenched" category). Finally, we illustrate how spectroscopic observation of nebular emission lines further enables as to constrain effectively the SFHs of galaxies.

  3. Mechanical design and fabrication of the VHF-gun, the Berkeley normal-conducting continuous-wave high-brightness electron source

    Science.gov (United States)

    Wells, R. P.; Ghiorso, W.; Staples, J.; Huang, T. M.; Sannibale, F.; Kramasz, T. D.

    2016-02-01

    A high repetition rate, MHz-class, high-brightness electron source is a key element in future high-repetition-rate x-ray free electron laser-based light sources. The VHF-gun, a novel low frequency radio-frequency gun, is the Lawrence Berkeley National Laboratory (LBNL) response to that need. The gun design is based on a normal conducting, single cell cavity resonating at 186 MHz in the VHF band and capable of continuous wave operation while still delivering the high accelerating fields at the cathode required for the high brightness performance. The VHF-gun was fabricated and successfully commissioned in the framework of the Advanced Photo-injector EXperiment, an injector built at LBNL to demonstrate the capability of the gun to deliver the required beam quality. The basis for the selection of the VHF-gun technology, novel design features, and fabrication techniques are described.

  4. Mechanical design and fabrication of the VHF-gun, the Berkeley normal-conducting continuous-wave high-brightness electron source.

    Science.gov (United States)

    Wells, R P; Ghiorso, W; Staples, J; Huang, T M; Sannibale, F; Kramasz, T D

    2016-02-01

    A high repetition rate, MHz-class, high-brightness electron source is a key element in future high-repetition-rate x-ray free electron laser-based light sources. The VHF-gun, a novel low frequency radio-frequency gun, is the Lawrence Berkeley National Laboratory (LBNL) response to that need. The gun design is based on a normal conducting, single cell cavity resonating at 186 MHz in the VHF band and capable of continuous wave operation while still delivering the high accelerating fields at the cathode required for the high brightness performance. The VHF-gun was fabricated and successfully commissioned in the framework of the Advanced Photo-injector EXperiment, an injector built at LBNL to demonstrate the capability of the gun to deliver the required beam quality. The basis for the selection of the VHF-gun technology, novel design features, and fabrication techniques are described.

  5. Hybrid high direct current circuit interrupter

    Science.gov (United States)

    Rockot, J.H.; Mikesell, H.E.; Jha, K.N.

    1998-08-11

    A device and a method are disclosed for interrupting very high direct currents (greater than 100,000 amperes) and simultaneously blocking high voltages (greater than 600 volts). The device utilizes a mechanical switch to carry very high currents continuously with low loss and a silicon controlled rectifier (SCR) to bypass the current around the mechanical switch while its contacts are separating. A commutation circuit, connected in parallel with the SCR, turns off the SCR by utilizing a resonant circuit to divert the SCR current after the switch opens. 7 figs.

  6. The Hamburg/RASS Catalogue of optical identifications. Northern high-galactic latitude ROSAT Bright Source Catalogue X-ray sources

    CERN Document Server

    Zickgraf, F J; Hagen, H J; Reimers, D; Voges, W

    2003-01-01

    We present the Hamburg/RASS Catalogue (HRC) of optical identifications of X-ray sources at high-galactic latitude. The HRC includes all X-ray sources from the ROSAT Bright Source Catalogue (RASS-BSC) with galactic latitude |b| >= 30 degr and declination delta >= 0 degr. In this part of the sky covering ~10 000 deg^2 the RASS-BSC contains 5341 X-ray sources. For the optical identification we used blue Schmidt prism and direct plates taken for the northern hemisphere Hamburg Quasar Survey (HQS) which are now available in digitized form. The limiting magnitudes are 18.5 and 20, respectively. For 82% of the selected RASS-BSC an identification could be given. For the rest either no counterpart was visible in the error circle or a plausible identification was not possible. With ~42% AGN represent the largest group of X-ray emitters, \\~31% have a stellar counterpart, whereas galaxies and cluster of galaxies comprise only ~4% and ~5%, respectively. In ~3% of the RASS-BSC sources no object was visible on our blue dire...

  7. Simultaneous fluorescence and high-resolution bright-field imaging with aberration correction over a wide field-of-view with Fourier ptychographic microscopy (FPM) (Conference Presentation)

    Science.gov (United States)

    Chung, Jaebum; Kim, Jinho; Ou, Xiaoze; Horstmeyer, Roarke; Yang, Changhuei

    2016-03-01

    We present a method to acquire both fluorescence and high-resolution bright-field images with correction for the spatially varying aberrations over a microscope's wide field-of-view (FOV). First, the procedure applies Fourier ptychographic microscopy (FPM) to retrieve the amplitude and phase of a sample, at a resolution that significantly exceeds the cutoff frequency of the microscope objective lens. At the same time, FPM algorithm is able to leverage on the redundancy within the set of acquired FPM bright-field images to estimate the microscope aberrations, which usually deteriorate in regions further away from the FOV's center. Second, the procedure acquires a raw wide-FOV fluorescence image within the same setup. Lack of moving parts allows us to use the FPM-estimated aberration map to computationally correct for the aberrations in the fluorescence image through deconvolution. Overlaying the aberration-corrected fluorescence image on top of the high-resolution bright-field image can be done with accurate spatial correspondence. This can provide means to identifying fluorescent regions of interest within the context of the sample's bright-field information. An experimental demonstration successfully improves the bright-field resolution of fixed, stained and fluorescently tagged HeLa cells by a factor of 4.9, and reduces the error caused by aberrations in a fluorescence image by 31%, over a field of view of 6.2 mm by 9.3 mm. For optimal deconvolution, we show the fluorescence image needs to have a signal-to-noise ratio of ~18.

  8. 1.9 W yellow, CW, high-brightness light from a high efficiency semiconductor laser-based system

    DEFF Research Database (Denmark)

    Hansen, Anders Kragh; Christensen, Mathias; Noordegraaf, Danny

    2017-01-01

    Semiconductor lasers are ideal sources for efficient electrical-to-optical power conversion and for many applications where their small size and potential for low cost are required to meet market demands. Yellow lasers find use in a variety of bio-related applications, such as photocoagulation......, imaging, flow cytometry, and cancer treatment. However, direct generation of yellow light from semiconductors with sufficient beam quality and power has so far eluded researchers. Meanwhile, tapered semiconductor lasers at near-infrared wavelengths have recently become able to provide neardiffraction......- limited, single frequency operation with output powers up to 8 W near 1120 nm. We present a 1.9 W single frequency laser system at 562 nm, based on single pass cascaded frequency doubling of such a tapered laser diode. The laser diode is a monolithic device consisting of two sections: a ridge waveguide...

  9. High-resolution Near-infrared Observations of a Small Cluster Associated with a Bright-rimmed Cloud in W5

    Science.gov (United States)

    Imai, Rieko; Sugitani, Koji; Miao, Jingqi; Fukuda, Naoya; Watanabe, Makoto; Kusune, Takayoshi; Pickles, Andrew J.

    2017-08-01

    We carried out near-infrared (IR) observations to examine star formation toward the bright-rimmed cloud SFO 12, of which the main exciting star is O7V star in W5-W. We found a small young stellar object (YSO) cluster of six members embedded in the head of SFO 12 facing its exciting star, aligned along the UV radiation incident direction from the exciting star. We carried out high-resolution near-IR observations with the Subaru adaptive optics (AO) system and revealed that three of the cluster members appear to have circumstellar envelopes, one of which shows an arm-like structure in its envelope. Our near-IR and {L}\\prime -band photometry and Spitzer IRAC data suggest that formation of two members at the tip side occurred in advance of other members toward the central part, under our adopted assumptions. Our near-IR data and previous studies imply that more YSOs are distributed in the region just outside the cloud head on the side of the main exciting star, but there is little sign of star formation toward the opposite side. We infer that star formation has been sequentially occurring from the exciting star side to the central part. We examined archival data of far-infrared and CO (J=3-2) which reveals that, unlike in the optical image, SFO 12 has a head-tail structure that is along the UV incident direction. This suggests that SFO 12 is affected by strong UV from the main exciting star. We discuss the formation of this head-tail structure and star formation there by comparing with a radiation-driven implosion (RDI) model.

  10. Hybrid optical antenna with high directivity gain.

    Science.gov (United States)

    Bonakdar, Alireza; Mohseni, Hooman

    2013-08-01

    Coupling of a far-field optical mode to electronic states of a quantum absorber or emitter is a crucial process in many applications, including infrared sensors, single molecule spectroscopy, and quantum metrology. In particular, achieving high quantum efficiency for a system with a deep subwavelength quantum absorber/emitter has remained desirable. In this Letter, a hybrid optical antenna based on coupling of a photonic nanojet to a metallo-dielectric antenna is proposed, which allows such efficient coupling. A quantum efficiency of about 50% is predicted for a semiconductor with volume of ~λ³/170. Despite the weak optical absorption coefficient of 2000 cm(-1) in the long infrared wavelength of ~8 μm, very strong far-field coupling has been achieved, as evidenced by an axial directivity gain of 16 dB, which is only 3 dB below of theoretical limit. Unlike the common phased array antenna, this structure does not require coherent sources to achieve a high directivity. The quantum efficiency and directivity gain are more than an order of magnitude higher than existing metallic, dielectric, or metallo-dielectric optical antenna.

  11. Proposal for Research on High-Brightness Cathodes for High-Power Free-Electron Lasers (FEL)

    Science.gov (United States)

    2013-05-09

    diamond field-emitter array (DFEA). The second is the gridded thermionic cathode, based on the development of gridded cathodes for high-power microwave ...possible as a method of increasing current density in exchange for higher turn-on field. Oxidation and deposition Diamond seeding : We now utilize...atmosphere or vacuum (~107 Torr) after the initial heat treatment results in performance that is slightly lower than that for operation at 450°C. This

  12. Steps toward a high precision solar rotation profile: Results from SDO/AIA coronal bright point data

    CERN Document Server

    Sudar, Davor; Brajša, Roman; Saar, Steven H

    2015-01-01

    Coronal bright points (CBP) are ubiquitous small brightenings in the solar corona associated with small magnetic bipoles. We derive the solar differential rotation profile by tracing the motions of CBPs detected by the Atmospheric Imaging Assembly (AIA) instrument aboard the Solar Dynamics Observatory (SDO). We also investigate problems related to detection of coronal bright points resulting from instrument and detection algorithm limitations. To determine the positions and identification of coronal bright points we used a segmentation algorithm. A linear fit of their central meridian distance and latitude versus time was utilised to derive velocities. We obtained 906 velocity measurements in a time interval of only 2 days. The differential rotation profile can be expressed as $\\omega_{rot} = (14.47\\pm 0.10 + (0.6\\pm 1.0)\\sin^{2}(b) + (-4.7\\pm 1.7)\\sin^{4}(b))$\\degr day$^{-1}$. Our result is in agreement with other work and it comes with reasonable errors in spite of the very short time interval used. This wa...

  13. Dark current studies on a normal-conducting high-brightness very-high-frequency electron gun operating in continuous wave mode

    Directory of Open Access Journals (Sweden)

    R. Huang

    2015-01-01

    Full Text Available We report on measurements and analysis of a field-emitted electron current in the very-high-frequency (VHF gun, a room temperature rf gun operating at high field and continuous wave (CW mode at the Lawrence Berkeley National Laboratory (LBNL. The VHF gun is the core of the Advanced Photo-injector Experiment (APEX at LBNL, geared toward the development of an injector for driving the next generation of high average power x-ray free electron lasers. High accelerating fields at the cathode are necessary for the high-brightness performance of an electron gun. When coupled with CW operation, such fields can generate a significant amount of field-emitted electrons that can be transported downstream the accelerator forming the so-called “dark current.” Elevated levels of a dark current can cause radiation damage, increase the heat load in the downstream cryogenic systems, and ultimately limit the overall performance and reliability of the facility. We performed systematic measurements that allowed us to characterize the field emission from the VHF gun, determine the location of the main emitters, and define an effective strategy to reduce and control the level of dark current at APEX. Furthermore, the energy spectra of isolated sources have been measured. A simple model for energy data analysis was developed that allows one to extract information on the emitter from a single energy distribution measurement.

  14. Transform-Limited X-Ray Pulse Generation from a High Brightness Self-Amplified Spontaneous Emission Free-Electron Laser

    CERN Document Server

    McNeil, B W J; Dunning, D J

    2012-01-01

    A method to achieve High-Brightness Self-Amplified Spontaneous Emission (HB-SASE) in the Free Electron Laser (FEL) is described. The method uses repeated non-equal electron beam delays to de-localise the collective FEL interaction and break the radiation coherence length dependence on the FEL cooperation length. The method requires no external seeding or photon optics and so is applicable at any wavelength or repetition rate. It is demonstrated using linear theory and numerical simulations that the radiation coherence length can be increased by approximately two orders of magnitude over SASE with a corresponding increase in spectral brightness. Examples are shown of HB-SASE generating transform-limited FEL pulses in the soft X-ray and near transform-limited pulses in the hard X-ray. Such pulses may greatly benefit existing applications and may also open up new areas of scientific research.

  15. Daylight photodynamic therapy - Experience and safety in treatment of actinic keratoses of the face and scalp in low latitude and high brightness region*

    Science.gov (United States)

    Galvão, Luiz Eduardo Garcia; Gonçalves, Heitor de Sá; Botelho, Karine Paschoal; Caldas, Juliana Chagas

    2017-01-01

    Daylight photodynamic therapy has been used in countries with high latitudes during the summer for actinic keratoses treatment with reports of similar efficacy to conventional photodynamic therapy. We evaluate its safety in 20 patients in the city of Fortaleza, a local with low latitude and high brightness. Sixteen patients did not report any discomfort due to the procedure. Daylight photodynamic therapy is an easy application method with great tolerability by the patient and has the possibility of being performed throughout the year in these regions. It can mean a promising tool in the control of skin cancer. PMID:28225978

  16. 高亮度半导体激光阵列光纤耦合模块%High Brightness Fiber Coupled Diode Laser Module

    Institute of Scientific and Technical Information of China (English)

    王鹏程; 邓永丽; 张立平; 郝明明; 朱洪波; 王立军

    2012-01-01

    Two 915 nm diode laser short bars were used as sub-module to manufacture high brightness fiber coupled module with continuous wave (CW) output power. Firstly, beam shaping technology was employed for each sub-module to enhance its beam quality. Secondly, the two beams were stacked in direction of lower beam parameter product by means of spatial multiplexing technology. Finally, the laser was focusing into a multimode fiber with 200 |xm core diameter and NA =0. 22 by optimized lens by focusing lens. Experiment results show that the beam waist diameter at focal plane is 105.4祄 when driving current is 52. 5 A, the optical power output from fiber can reach to 72. 6 W with a brightness of 6.08 MW/(cm2 ?sr), and the wallplug efficiency is 42. 2% when driving current is 52. 5 A. The character of heat dissipation was studied by means of measuring spectrum with different current, and the results prove that the module has favorable heat dissipation.%利用2只915 nm半导体激光短列阵作为子模块,设计并研制出连续输出的高亮度光纤耦合模块.首先对每个半导体激光短列阵进行光束整形,从而提高它的光束质量;然后采用空间复用技术将这两个半导体激光短列阵出射的激光在光参数积小的方向上叠加,并利用偏振复用技术进一步提高光束质量;最后利用单片非球面透镜将激光聚焦到芯径为100 μm、数值孔径为0.22的光纤中.测量结果显示:在工作电流为52.5A时,聚焦镜焦平面的光斑尺寸为105.4 μm;耦合后测量光纤出光功率可达72.6 W,对应亮度为6.08 MW/(cm2·sr),模块的电光转换效率为42.2%.最后测量了模块在不同驱动电流时的光谱,证明该模块的散热性能良好.

  17. Burkina Faso - BRIGHT II

    Data.gov (United States)

    Millennium Challenge Corporation — Millennium Challenge Corporation hired Mathematica Policy Research to conduct an independent evaluation of the BRIGHT II program. The three main research questions...

  18. Probing the behaviour of high brightness bunches in collision at 6.5 TeV and the interplay with an external source of noise (MD1433)

    CERN Document Server

    Buffat, Xavier; Furuseth, Sondre Vik; Jacquet, Delphine; Metral, Elias; Pellegrini, Dario; Pojer, Mirko; Trad, Georges; Valuch, Daniel; Barranco Garcia, Javier; Pieloni, Tatiana; Tambasco, Claudia; Li, Qiang; CERN. Geneva. ATS Department

    2017-01-01

    The results of an experiment aiming at colliding high brightness bunches at 6.5 TeV in the LHC and probing the interplay between external noise and head on beam-beam interaction are presented. The colliding bunches are shown to have a burn off dominated lifetime, but they experience a significant emittance growth, possibly resulting from the transverse feedback noise with non standard settings. While several features remain to be understood, the effect of noise on colliding beams seems compatible with the so-called weak-strong model.

  19. First measurements of electron-beam transit times and micropulse elongation in a photoelectric injector at the High-Brightness Accelerator FEL (HIBAF)

    Energy Technology Data Exchange (ETDEWEB)

    Lumpkin, A.H.; Carlsten, B.E.; Feldman, R.B.

    1990-01-01

    Key aspects of the dynamics of a photoelectric injector (PEI) on the Los Alamos High-Brightness Accelerator FEL (HIBAF) facility have been investigated using a synchroscan streak camera. By phase-locking the streak camera sweep to the reference 108.3 MHz rf signal, the variations of micropulse temporal elongations (30 to 80% over the drive-laser pulse length) and of transit times (25 ps for a 16{degree}-phase change) were observed for the first time. These results were in good agreement with PARMELA simulations. 2 refs., 8 figs.

  20. Bright Light Treatment in Psychiatry

    Directory of Open Access Journals (Sweden)

    Pinar Guzel Ozdemir

    2017-06-01

    Full Text Available Bright light treatment is a treatment modality that leads elevation of mood due to attenuation in depressive symptoms, regulation in circadian rhythm activity, increase the effect of antidepressants and amelioration in sleep quality. Bright light treatment is considered among the first-line treatments for seasonal affective disorder because of high response rates. Additionally, bright light treatment being extended to other conditions, including non-seasonal mood disorders, Alzheimer's disease, circadian rhythm sleep disorders, eating disorders, attention deficit hyperactivity disorder and other behavioral syndromes is likely to have a far reached use. Side effects are often temporary and can generally be overcome by reducing exposure time. The central focus on this paper is to review the action mechanisms, efficacy, usage areas, the ways of administration and side effects of the light treatment. [Psikiyatride Guncel Yaklasimlar - Current Approaches in Psychiatry 2017; 9(2.000: 177-188

  1. High Throughput Direct Detection Doppler Lidar Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Lite Cycles, Inc. (LCI) proposes to develop a direct-detection Doppler lidar (D3L) technology called ELITE that improves the system optical throughput by more than...

  2. Subaru high-$z$ exploration of low-luminosity quasars (SHELLQs). I. Discovery of 15 quasars and bright galaxies at $5.7 < z < 6.9$

    CERN Document Server

    Matsuoka, Yoshiki; Kashikawa, Nobunari; Iwasawa, Kazushi; Strauss, Michael A; Nagao, Tohru; Imanishi, Masatoshi; Niida, Mana; Toba, Yoshiki; Akiyama, Masayuki; Asami, Naoko; Bosch, James; Foucaud, Sébastien; Furusawa, Hisanori; Goto, Tomotsugu; Gunn, James E; Harikane, Yuichi; Ikeda, Hiroyuki; Kawaguchi, Toshihiro; Kikuta, Satoshi; Komiyama, Yutaka; Lupton, Robert H; Minezaki, Takeo; Miyazaki, Satoshi; Morokuma, Tomoki; Murayama, Hitoshi; Nishizawa, Atsushi J; Ono, Yoshiaki; Ouchi, Masami; Price, Paul A; Sameshima, Hiroaki; Silverman, John D; Sugiyama, Naoshi; Tait, Philip J; Takada, Masahiro; Takata, Tadafumi; Tanaka, Masayuki; Tang, Ji-Jia; Utsumi, Yousuke

    2016-01-01

    We report the discovery of 15 quasars and bright galaxies at $5.7 < z < 6.9$. This is the initial result from the Subaru High-$z$ Exploration of Low-Luminosity Quasars (SHELLQs) project, which exploits the exquisite multi-band imaging data produced by the Subaru Hyper Suprime-Cam (HSC) Strategic Program survey. The candidate selection is performed by combining several photometric approaches including a Bayesian probabilistic algorithm to reject stars and dwarfs. The spectroscopic identification was carried out with the Gran Telescopio Canarias and the Subaru Telescope for the first 80 deg$^2$ of the survey footprint. The success rate of our photometric selection is quite high, approaching 100 % at the brighter magnitudes ($z_{\\rm AB} < 23.5$ mag). Our selection also recovered all the known high-$z$ quasars on the HSC images. Among the 15 discovered objects, six are likely quasars, while the other six with interstellar absorption lines and in some cases narrow emission lines are likely bright Lyman-br...

  3. Comparison of detectability of a simple object with low contrast displayed on a high-brightness color LCD and a monochrome LCD.

    Science.gov (United States)

    Takahashi, Keita; Morishita, Junji; Hiwasa, Takeshi; Hatanaka, Shiro; Sakai, Shuji; Hashimoto, Noriyuki; Nakamura, Yasuhiko; Toyofuku, Fukai; Higashida, Yoshiharu; Ohki, Masafumi

    2010-07-01

    The goal of this study was to investigate the effect of the different luminance settings of a high-brightness color liquid-crystal display (LCD) on the detectability of a simple grayscale object with low contrast by use of receiver operating characteristic (ROC) analysis. The detectability of a high-brightness color LCD with two maximum-luminance settings (500 and 170 cd/m(2)) was compared with the detectability of a monochrome LCD (500 cd/m(2)). The two LCDs used in this study were calibrated to the grayscale standard display function. The average areas under the ROC curve (AUCs) and the standard deviations for all thirteen observers for the 500 cd/m(2) color LCD, 500 cd/m(2) monochrome LCD, and 170 cd/m(2) color LCD were 0.937 +/- 0.040, 0.924 +/- 0.056, and 0.915 +/- 0.068, respectively. There were no statistically significant differences in the average AUCs among the three LCD monitor conditions. On the other hand, the total observation time for the 170 cd/m(2) color LCD was significantly shorter than that for the 500 cd/m(2) color and monochrome LCDs (p LCD provided a performance comparable to the monochrome LCD for detection of a simple grayscale object with low contrast.

  4. Sunspot Bright Points

    CERN Document Server

    Choudhary, Debi Prasad

    2010-01-01

    We used the flux calibrated images through the Broad Band Filter Imager and Stokes Polarimeter data obtained with the Solar Optical Telescope onboard the Hinode spacecraft to study the properties of bright points in and around the sunspots. The well isolated bright points were selected and classified as umbral dot, peripheral umbral dot, penumbral grains and G-band bright point depending on their location. Most of the bright points are smaller than about 150 km. The larger points are mostly associated with the penumbral features. The bright points are not uniformly distributed over the umbra but preferentially located around the penumbral boundary and in the fast decaying parts of umbra. The color temperature of the bright points, derived using the continuum irradiance, are in the range of 4600 K to 6600 K with cooler ones located in the umbra. The temperature increases as a function of distance from the center to outside. The G-band, CN-band and CaII H flux of the bright points as a function of their blue ba...

  5. Generation of High Brightness Electron Beams via Ionization Induced Injection by Transverse Colliding Lasers in a Beam-Driven Plasma Wakefield Accelerator

    CERN Document Server

    Li, F; Xu, X L; Zhang, C J; Yan, L X; Du, Y C; Huang, W H; Cheng, H B; Tang, C X; Lu, W; Joshi, C; Mori, W B; Gu, Y Q

    2013-01-01

    The production of ultra-bright electron bunches using ionization injection triggered by two transversely colliding laser pulses inside a beam-driven plasma wake is examined via three-dimensional (3D) particle-in-cell (PIC) simulations. The relatively low intensity lasers are polarized along the wake axis and overlap with the wake for a very short time. The result is that the residual momentum of the ionized electrons in the transverse plane of the wake is much reduced and the injection is localized along the propagation axis of the wake. This minimizes both the initial 'thermal' emittance and the emittance growth due to transverse phase mixing. 3D PIC simulations show that ultra-short (around 8 fs) high-current (0.4 kA) electron bunches with a normalized emittance of 8.5 and 6 nm in the two planes respectively and a brightness greater than 1.7*10e19 A rad-2 m-2 can be obtained for realistic parameters.

  6. Synthesis and characterization of a Noble metal Enhanced Optical Nanohybrid (NEON): a high brightness detection platform based on a dye-doped silica nanoparticle.

    Science.gov (United States)

    Roy, Shibsekhar; Dixit, Chandra K; Woolley, Robert; O'Kennedy, Richard; McDonagh, Colette

    2012-05-29

    A highly bright and photostable, fluorescent nanohybrid particle is presented which consists of gold nanoparticles (GNPs) embedded in dye-doped silica in a core-shell configuration. The dye used is the near-infrared emitting 4,5-benzo-5'-(iodoacetaminomethyl)-1',3,3,3',3'-pentamethyl-1-(4-sulfobutyl) indodicarbo cyanine. The nanohybrid architecture comprises a GNP core which is separated from a layer of dye molecules by a 15 nm buffer layer and has an outer protective, undoped silica shell. Using this architecture, a brightness factor of 550 has been achieved compared to the free dye. This hybrid system, referred to as Noble metal Enhanced Optical Nanohybrid (NEON) in this paper, is the first nanohybrid construct to our knowledge which demonstrates such tunable fluorescence property. NEON has enhanced photostability compared to the free dye and compared to a control particle without GNPs. Furthermore, the NEON particle, when used as a fluorescent label in a model bioassay, shows improved performance over assays using a conventional single dye molecule label.

  7. Advantage in Bright-blood and Black-blood Magnetic Resonance Imaging with High-resolution for Analysis of Carotid Atherosclerotic Plaques

    Directory of Open Access Journals (Sweden)

    Mei Li

    2015-01-01

    Full Text Available Background: About 50% of the cerebral ischemia events are induced by intracranial and extracranial atherosclerosis. This study aimed to evaluate the feasibility and accuracy for displaying atherosclerotic plaques in carotid arteries and analyzing their ingredients by using high-resolution new magnetic resonance imaging (MRI techniques. Methods: Totally, 49 patients suspected of extracranial carotid artery stenosis were subjected to cranial MRI scan and magnetic resonance angiography (MRA examination on carotid arteries, and high-resolution bright-blood and black-blood MRI analysis was carried out within 1 week. Digital subtraction angiography (DSA examination was carried out for 16 patients within 1 month. Results: Totally, 103 plaques were detected in the 49 patients, which were characterized by localized or diffusive thickening of the vessel wall, with the intrusion of crescent-shaped abnormal signal into lumens. Fibrous cap was displayed as isointensity in T1-weighted image (T1WI and hyperintensities in proton density weighted image (PDWI and T2-weighted image (T2WI, lipid core was displayed as isointensity or slight hyperintensities in T1WI, isointensity, hyperintensities or hypointensity in PDWI, and hypointensity in T2WI. Calcification in plaques was detected in 11 patients. Eight patients were detected with irregular plaque surface or ulcerative plaques, which were characterized by irregular intravascular space surface in the black-blood sequences, black hypointensity band was not detected in three-dimensional time-of-flight, or the hypointensity band was not continuous, and intrusion of hyperintensities into plaques can be detected. Bright-blood and black-blood techniques were highly correlated with the diagnosis of contrast-enhanced MRA in angiostenosis degree, Rs = 0.97, P < 0.001. In comparison to DSA, the sensitivity, specificity, and accuracy of MRI diagnosis of stenosis for ≥50% were 88.9%, 100%, and 97.9%, respectively

  8. Generating coherent soft x-ray pulses in the water window with a high-brightness seeded free-electron laser

    CERN Document Server

    Zhou, Kaishang; Deng, Haixiao; Wang, Dong

    2016-01-01

    We propose a new scheme to generate high-brightness and temporal coherent soft x-ray radiation in a seeded free-electron laser. The proposed scheme is based the coherent harmonic generation (CHG) and superradiant principles. A CHG scheme is first used to generate coherent signal at ultra-high harmonics of the seed. This coherent signal is then amplified by a series of chicane-undulator modules via the fresh bunch and superradiant processes in the following radiator. Using a representative of realistic set of parameters, three-dimensional simulations have been carried out and the simulations results demonstrated that 10 GW-level ultra-short coherent radiation pulses in the water window can be achieved by using the proposed technique.

  9. Progress in High Brightness Solid-state Laser Welding%高亮度固体激光焊接研究进展

    Institute of Scientific and Technical Information of China (English)

    肖荣诗; 邹江林; 吴世凯

    2015-01-01

    高亮度固体激光,特别是光纤激光以其光束质量高、加工柔性好、运行成本低等综合优势,吸引了国内外研究人员的广泛关注. 结合作者的研究工作,概括了高亮度固体激光焊接模式转变过程、羽辉特性、飞溅特性、深熔小孔壁形貌及孔内能量耦合等焊接物理过程方面的最新研究进展. 阐述了大厚板材超窄间隙激光焊、异种金属熔钎焊、激光电弧复合焊等焊接方法的最新研究.%High brightness solid-state lasers, especially the fiber laser, have received extensive attention all over the world owing to their favorable comprehensive advantages, such as high beam quality, high processing flexibility, and low operating cost. In this paper, some aspects on high brightness solid laser welding physical processes, such as the transition of welding mode, laser-induced plume, spatters, the micro-morphology of the keyhole wall and the energy coupling in the keyhole are reviewed. Additionally, some new welding methods, including ultra-narrow gap laser welding of heavy section, laser penetration brazing of dissimilar alloys, and laser-arc hybrid welding, are also reviewed.

  10. High Humanistic Directivity of Russian Patriotic Idea

    Directory of Open Access Journals (Sweden)

    Sergei V. Yanush

    2013-01-01

    Full Text Available Russia is in high need of professionals, meeting the requirements of international standards, highly skilled, well-informed, legally savvy specialists, patriots of their work, having civil maturity and high moral and ethic qualities. Modern Russian society wants the employers of all levels to have deep understanding of civil importance and social significance of their activities, strong moral and spiritual basis, high cultural behavior.Training of such specialists is closely related to patriotic upbringing, creation of value-motivational core of the society and resource base of Russia’s restoration through the reproduction of a man of culture, citizen, patriot, moral, responsible, composite and spiritual personality, having distinct guidelines, ideas and ideals of the Russian patriotism. According to the president of the Russian Federation V.V. Putin: ‘We need the strategy of national policy, based on civil patriotism. High patriotic idea, the idea of statehood is the backbone, the foundation of the spirituality of modern Russian society and its future.”Nowadays, when Russia ‘gathers stones’ of its history, patriotism as the phenomenon of national spirituality and the component of public consciousness is as crucial for Russian reality as it was many centuries ago. The power of any country is mainly determined by the depth of patriotism of its citizens.

  11. [Bright light therapy].

    Science.gov (United States)

    Poirrier, R; Cambron, L

    2007-01-01

    Bright light therapy is a treatment that emerged in the eighties of the last century. It can be used in different pathologies such as seasonal affective disorders, major depressions, and many disorders of the wake-sleep rhythm, whether they are of primary or secondary origin. Important progress made at the basic neuroscience levels, allows today a sound understanding of the bright light mode of action. Moreover, the main indications are now the subject of consensus reports and meta-analyses which show good levels of evidence-based medicine. Bright light therapy constitutes a first choice indication in seasonal affective disorder. It is also perfectly possible to prescribe bright light therapy in the major depression disorders. It has been demonstrated that the effect size is the same as with antidepressants of reference. It is admitted nowadays that bright light therapy may be at least, an adjunct to pharmacotherapy, in order to accelerate the antidepressant effect onset, or to prolong this effect after withdrawal of the drug. Bright light therapy can also be viewed as an alternative to the pharmacological approach especially when this one is impossible, not tolerated or not accepted by the patient. The contraindications are rare.

  12. Observation of a highly directional γ-ray beam from ultrashort, ultraintense laser pulse interactions with solids

    Science.gov (United States)

    Norreys, P. A.; Santala, M.; Clark, E.; Zepf, M.; Watts, I.; Beg, F. N.; Krushelnick, K.; Tatarakis, M.; Dangor, A. E.; Fang, X.; Graham, P.; McCanny, T.; Singhal, R. P.; Ledingham, K. W. D.; Creswell, A.; Sanderson, D. C. W.; Magill, J.; Machacek, A.; Wark, J. S.; Allott, R.; Kennedy, B.; Neely, D.

    1999-05-01

    Novel measurements of electromagnetic radiation above 10 MeV are presented for ultra intense laser pulse interactions with solids. A bright, highly directional source of γ rays was observed directly behind the target. The γ rays were produced by bremsstrahlung radiation from energetic electrons generated during the interaction. They were measured using the photoneutron reaction [63Cu(γ,n)62Cu] in copper. The resulting activity was measured by coincidence counting the positron annihilation γ rays which were produced from the decay of 62Cu. New measurements of the bremsstrahlung radiation at 1019W cm-2 are also presented.

  13. Production, formation, and transport of high-brightness atomic hydrogen beam studies for the relativistic heavy ion collider polarized source upgrade

    Energy Technology Data Exchange (ETDEWEB)

    Kolmogorov, A., E-mail: anton.kolmogorov@gmail.com; Stupishin, N. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation); Atoian, G.; Ritter, J.; Zelenski, A. [Brookhaven National Laboratory, Upton, New York 11973 (United States); Davydenko, V.; Ivanov, A. [Budker Institute of Nuclear Physics, Novosibirsk (Russian Federation); Novosibirsk State University, Novosibirsk (Russian Federation)

    2014-02-15

    The RHIC polarized H{sup −} ion source had been successfully upgraded to higher intensity and polarization by using a very high brightness fast atomic beam source developed at BINP, Novosibirsk. In this source the proton beam is extracted by a four-grid multi-aperture ion optical system and neutralized in the H{sub 2} gas cell downstream from the grids. The proton beam is extracted from plasma emitter with a low transverse ion temperature of ∼0.2 eV which is formed by plasma jet expansion from the arc plasma generator. The multi-hole grids are spherically shaped to produce “geometrical” beam focusing. Proton beam formation and transport of atomic beam were experimentally studied at test bench.

  14. High-brightness laser plasma soft X-ray source using a double-stream gas puff target irradiated with the Prague Asterix Laser System (PALS)

    Energy Technology Data Exchange (ETDEWEB)

    Fiedorowicz, H.; Bartnik, A.; Juha, L.; Jungwirth, K.; Kralikova, B.; Krasa, J.; Kubat, P.; Pfeifer, M.; Pina, L.; Prchal, P.; Rohlena, K.; Skala, J.; Ullschmied, J.; Horvath, M.; Wawer, J

    2004-01-14

    High brightness laser plasma soft X-ray source based on a recently developed double-stream gas puff target irradiated with 0.5 ns laser pulses with energies up to 700 J from the Prague Asterix Laser System (PALS) is presented. The gas puff target was created by pulsed injection of xenon into a hollow stream of helium using an electromagnetic valve system with the double-nozzle setup. Soft X-ray emission was measured using the transmission grating spectrograph coupled to a CCD camera and the calibrated silicon photodiodes. The absolute soft X-ray production was determined to be 160 J for 540 J of laser energy, giving the soft X-ray conversion efficiency of about 30%. The source has been used in initial experiments on soft X-ray ablation of organic polymers and elemental solids.

  15. Generating high-brightness and coherent soft x-ray pulses in the water window with a seeded free-electron laser

    Directory of Open Access Journals (Sweden)

    Kaishang Zhou

    2017-01-01

    Full Text Available We propose a new scheme to generate high-brightness and temporal coherent soft x-ray radiation in a seeded free-electron laser. The proposed scheme is based on the coherent harmonic generation (CHG and superradiant principles. A CHG scheme is first used to generate a coherent signal at ultrahigh harmonics of the seed. This coherent signal is then amplified by a series of chicane-undulator modules via the fresh bunch and superradiant processes in the following radiator. Using a representative of a realistic set of parameters, three-dimensional simulations have been carried out and the simulations results demonstrated that 10 GW-level ultrashort (∼20  fs coherent radiation pulses in the water window can be achieved by using a 1.6 GeV electron beam based on the proposed technique.

  16. High-brightness semipolar (2021¯) blue InGaN/GaN superluminescent diodes for droop-free solid-state lighting and visible-light communications

    KAUST Repository

    Shen, Chao

    2016-05-25

    A high-brightness, droop-free, and speckle-free InGaN/GaN quantum well blue superluminescent diode (SLD) was demonstrated on a semipolar (2021) GaN substrate. The 447-nm emitting SLD has a broad spectral linewidth of 6.3 nm at an optical power of 123 mW. A peak optical power of 256 mW was achieved at 700 mA CW injection current. By combining YAG:Ce phosphor, SLD-generated white light shows a color-rendering index (CRI) of 68.9 and a correlated color temperature (CCT) of 4340 K. The measured frequency response of the SLD revealed a -3 dB bandwidth of 560 MHz, thus demonstrating the feasibility of the device for both solid-state lighting (SSL) and visible-light communication (VLC) applications. © 2016 Optical Society of America.

  17. Fabrication of high-brightness GaN-based light-emitting diodes via thermal nanoimprinting of ZnO-nanoparticle-dispersed resin

    Energy Technology Data Exchange (ETDEWEB)

    Byeon, Kyeong-Jae [Department of Electrical Engineering and Computer Science, University of Michigan, Ann Arbor, MI 48109 (United States); Cho, Joong-Yeon; Jo, Han-Byeol [Department of Materials Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of); Lee, Heon, E-mail: heonlee@korea.ac.kr [Department of Materials Science and Engineering, Korea University, Seoul 136-701 (Korea, Republic of)

    2015-08-15

    Highlights: • A various high-refractive-index ZnO patterns were formed on LED using imprinting. • Mechanism of light extraction enhancement was demonstrated by simulation and EL. • Light output power of patterned LED was improved up 19.6% by light waveguide effect. - Abstract: We fabricated high-brightness GaN-based light-emitting diodes (LEDs) with highly refractive patterned structures by using a thermal nanoimprint lithography (NIL). A highly refractive ZnO-nanoparticle-dispersed resin (ZNDR) was used in NIL, and a submicron hole, a submicron high-aspect-ratio pillar, and microconvex arrays were fabricated on the indium tin oxide (ITO) top electrode of GaN-based LED devices. We analyzed the light extraction mechanism for each of the three types of patterns by using a finite element method simulation, and found that the high-aspect-ratio pillar had a great ability to improve light extraction owing to its waveguide effect and prominent scattering effect. As a result, the light output power, which was measured in an integrating sphere, of the LED device was enhanced by up to 19.6% when the high-aspect-ratio pillar array was formed on the top ITO electrode of the device. Further, the electrical properties of none of the patterned LED devices fabricated using ZNDR degraded in comparison to those of bare LED devices.

  18. Larger Planet Radii Inferred from Stellar "Flicker" Brightness Variations of Bright Planet Host Stars

    CERN Document Server

    Bastien, Fabienne A; Pepper, Joshua

    2014-01-01

    Most extrasolar planets have been detected by their influence on their parent star, typically either gravitationally (the Doppler method) or by the small dip in brightness as the planet blocks a portion of the star (the transit method). Therefore, the accuracy with which we know the masses and radii of extrasolar planets depends directly on how well we know those of the stars, the latter usually determined from the measured stellar surface gravity, logg. Recent work has demonstrated that the short-timescale brightness variations ("flicker") of stars can be used to measure logg to a high accuracy of ~0.1-0.2 dex (Bastien et al. 2013). Here, we use flicker measurements of 289 bright (Kepmag<13) candidate planet-hosting stars with Teff=4500-6650 K to re-assess the stellar parameters and determine the resulting impact on derived planet properties. This re-assessment reveals that for the brightest planet-host stars, an astrophysical bias exists that contaminates the stellar sample with evolved stars: nearly 50%...

  19. Room temperature synthesis of ultra-small, near-unity single-sized lead halide perovskite quantum dots with wide color emission tunability, high color purity and high brightness

    Science.gov (United States)

    Peng, Lucheng; Geng, Jing; Ai, Lisha; Zhang, Ying; Xie, Renguo; Yang, Wensheng

    2016-08-01

    Phosphor with extremely narrow emission line widths, high brightness, and wide color emission tunability in visible regions is required for display and lighting applications, yet none has been reported in the literature so far. In the present study, single-sized lead halide perovskite (APbX 3; A = CH3NH3 and Cs; X = Cl, Br, and I) nanocrystalline (NC) phosphors were achieved for the first time in a one-pot reaction at room temperature (25 °C). The size-dependent samples, which included four families of CsPbBr3 NCs and exhibited sharp excitonic absorption peaks and pure band gap emission, were directly obtained by simply varying the concentration of ligands. The continuity of the optical spectrum can be successively tuned over the entire UV-visible spectral region (360-610 nm) by preparing CsPbCl3, CsPbI3, and CsPb(Y/Br)3 (Y = Cl and I) NCs with the use of CsPbBr3 NCs as templates by anion exchange while maintaining the size of NCs and high quantum yields of up to 80%. Notably, an emission line width of 10-24 nm, which is completely consistent with that of their single particles, indicates the formation of single-sized NCs. The versatility of the synthetic strategy was validated by extending it to the synthesis of single-sized CH3NH3PbX 3 NCs by simply replacing the cesium precursor by the CH3NH3 X precursor.

  20. Room temperature synthesis of ultra-small, near-unity single-sized lead halide perovskite quantum dots with wide color emission tunability, high color purity and high brightness.

    Science.gov (United States)

    Peng, Lucheng; Geng, Jing; Ai, Lisha; Zhang, Ying; Xie, Renguo; Yang, Wensheng

    2016-08-19

    Phosphor with extremely narrow emission line widths, high brightness, and wide color emission tunability in visible regions is required for display and lighting applications, yet none has been reported in the literature so far. In the present study, single-sized lead halide perovskite (APbX 3; A = CH3NH3 and Cs; X = Cl, Br, and I) nanocrystalline (NC) phosphors were achieved for the first time in a one-pot reaction at room temperature (25 °C). The size-dependent samples, which included four families of CsPbBr3 NCs and exhibited sharp excitonic absorption peaks and pure band gap emission, were directly obtained by simply varying the concentration of ligands. The continuity of the optical spectrum can be successively tuned over the entire UV-visible spectral region (360-610 nm) by preparing CsPbCl3, CsPbI3, and CsPb(Y/Br)3 (Y = Cl and I) NCs with the use of CsPbBr3 NCs as templates by anion exchange while maintaining the size of NCs and high quantum yields of up to 80%. Notably, an emission line width of 10-24 nm, which is completely consistent with that of their single particles, indicates the formation of single-sized NCs. The versatility of the synthetic strategy was validated by extending it to the synthesis of single-sized CH3NH3PbX 3 NCs by simply replacing the cesium precursor by the CH3NH3 X precursor.

  1. Highly sensitive direct conversion ultrasound interferometer

    Science.gov (United States)

    Svitelskiy, Oleksiy; Grossmann, John; Suslov, Alexey

    2015-03-01

    Being invented more than fifty years ago, the ultrasonic pulse-echo technique has proven itself as a valuable and indispensable non-destructive tool to explore elastic properties of materials in engineering and scientific tasks. We propose a new design for the instrument based on mass-produced integral microchips. In our design the radiofrequency echo-pulse signal is processed by AD8302 RF gain and phase detector (www.analog.com).Its phase output is linearly proportional to the phase difference between the exciting and response signals. The gain output is proportional to the log of the ratio of amplitudes of the received to the exciting signals. To exclude the non-linear fragments and to enable exploring large phase changes, we employ parallel connection of two detectors, fed by in-phase and quadrature signals respectively. The instrument allowed us exploring phase transitions with precision of ΔV / V ~10-7 (V is the ultrasound speed). The high sensitivity of the logarithmic amplifiers embedded into AD8302 requires good grounding and screening of the receiving circuitry.

  2. High-brightness picosecond ion beam source based on BNL Terawatt CO2 laser: Proof-of-principle experiments

    Energy Technology Data Exchange (ETDEWEB)

    Shkolnikov, Peter

    2012-10-04

    Under the continuing DOE support, we have: o assembled the basic experiment setup and then continued expanding it to include diverse diagnostics and to accommodate gas jet targets in addition to metal foils; o conducted an extensive study of our novel laser, significantly enhanced laser beam diagnostics, and improved relevant laser parameters; o turned our experiments into a truly international endeavor with active collaboration of close to 20 researchers in US, UK, and Germany; o conducted the first ever experiments with proton and ion acceleration by lasers interacting with overcritical plasma of gas jets; o for the first time directly observed radiation pressure acceleration of protons, including quasi-monoenergetic spectra promising for future applications; o for the first time directly observed quasi-stable, bubble-like plasma structures that likely evolved from relativistic laser-plasma solitons (post-solitons). Thus, we have confirmed a strong potential of a picosecond TW CO2 laser as a research tool in laser-plasma science and as a promising vehicle for future applications of laser ion acceleration. This has led to apparent increase of the interest in mid-IR laser ion acceleration. In particular, another major research group began extensive proton acceleration experiments with their own CO2 laser at UCLA. As a result, the mechanisms responsible for laser proton acceleration in gas jets have become somewhat clearer. It is also important to note that modest DOE funding played the role of a seed support ensuring the formation of a multinational research team, whose members contributed its time and equipment with value well in excess of that seed amount.

  3. Hypertelescopes: The Challenge of Direct Imaging at High Resolution

    Science.gov (United States)

    Labeyrie, A.

    2013-03-01

    Sparse optical interferometric arrays of many apertures can produce direct images in the densified-pupil mode, also called "hypertelescope" mode. Pending the introduction of adaptive optics for cophasing, indirect images can also be reconstructed with speckle imaging techniques. But adaptive phasing is preferable, when a sufficiently bright guide star is available. Several wave sensing techniques, by-products of those used on monolithic telescopes for some of them, are potentially usable. For cophased direct images of very faint sources in the absence of a natural guide star, a modified form of the Laser Guide Star techniques demonstrated on conventional and segmented telescopes is described. Preliminary testing in laboratory suggests further investigation. Recorded images, assumed co-phased, are also improvable post-detection with optical aperture-synthesis techniques such as Earth rotation synthesis, where data from successive exposures are combined incoherently. Nevertheless, the gain becomes modest if hundreds of sub-apertures are used. Image deconvolution techniques are also applicable, if suitably modified as demonstrated by Aime et al. (2012), and Mary (2012). Their modified deconvolution algorithms can extend the Direct Imaging Field (also called Clean Field) of hypertelescopes. More sub-apertures at given collecting area, implying that their size is reduced, improve the direct-imaging performance. The predictable trend thus favors systems combining hundreds of sub-apertures of modest size, if workable designs can be evolved. One such design, the "Ubaye Hypertelescope" entering the initial testing phase in the southern Alps, has a fixed spherical meta-mirror with a 57 m effective aperture, expandable to 200 m. Preliminary results suggest that larger versions, whether spherical or active paraboloidal, can reach a kilometric aperture size at terrestrial sites having a suitable concave topography. In space, hypertelescope meta-apertures spanning up to 100 000

  4. Ion beams in SEM: An experiment towards a high brightness low energy spread electron impact gas ion source

    NARCIS (Netherlands)

    Jun, D.S.; Kutchoukov, V.G.; Kruit, P.

    2011-01-01

    A next generation ion source suitable for both high resolution focused ion beam milling and imaging applications is currently being developed. The new ion source relies on a method of which positively charged ions are extracted from a miniaturized gas chamber where neutral gas atoms become ionized b

  5. G181.1+9.5, a new high-latitude low-surface brightness supernova remnant

    Science.gov (United States)

    Kothes, Roland; Reich, Patricia; Foster, Tyler J.; Reich, Wolfgang

    2017-01-01

    Context. More than 90% of the known Milky Way supernova remnants (SNRs) are within 5° of the Galactic plane. The discovery of the new high-latitude SNR G181.1+9.5 will give us the opportunity to learn more about the environment and magnetic field at the interface between disk and halo of our Galaxy. Aims: We present the discovery of SNR G181.1+9.5, a new high-latitude SNR, serendipitously discovered in an ongoing survey of the Galactic anti-centre High-Velocity Cloud complex, observed with the DRAO Synthesis Telescope in the 21 cm radio continuum and H i spectral line. Methods: We use radio continuum observations (including the linearly polarized component) at 1420 MHz (observed with the DRAO ST) and 4850 MHz (observed with the Effelsberg 100-m radio telescope) to map G181.1+9.5 and determine its nature as a SNR. High-resolution 21 cm H i line observations and H i emission and absorption spectra reveal the physical characteristics of its local interstellar environment. Finally, we estimate the basic physical parameters of G181.1+9.5 using models for highly-evolved SNRs. Results: G181.1+9.5 has a circular shell-like morphology with a radius of about 16 pc at a distance of 1.5 kpc some 250 pc above the mid-plane. The radio observations reveal highly linearly polarized emission with a non-thermal spectrum. Archival ROSAT X-ray data reveal high-energy emission from the interior of G181.1+9.5 indicative of the presence of shock-heated ejecta. The SNR is in the advanced radiative phase of SNR evolution, expanding into the HVC inter-cloud medium with a density of nHI ≈ 1 cm-3. Basic physical attributes of G181.1+9.5 calculated with radiative SNR models show an upper-limit age of 16 000 yr, a swept-up mass of more than 300M⊙, and an ambient density in agreement with that estimated from H i observations. Conclusions: G181.1+9.5 shows all characteristics of a typical mature shell-type SNR, but its observed faintness is unusual and requires further study.

  6. Novel high-brightness tunneling-regenerated multi-active-region AlGaInP light-emitting diode

    Institute of Scientific and Technical Information of China (English)

    郭霞; 沈光地; 王国宏; 王学忠; 杜金玉; 高国; 王康隆

    2003-01-01

    In order to resolve the prevailing problems in conventional light-emitting diodes (LEDs), novel high-efficiency tunneling-regenerated multi-active-region (TRMAR) LEDs are proposed, which have such advantages as low heat generation, carrier overflow level and non-radiation recombination rate and whose quantum efficiency and the output optical power can be scaled with the number of the active regions. Experiments show that the on-axis luminous intensity of TRMAR LEDs increases linearly with the number of active regions. The novel LEDs have high quantum efficiency under low current injection and their maximum on-axis luminous intensity exceeds 5 candelas at 20 mA current injection at the peak wavelength of 625 nm with a 15° angle cap.

  7. Search for direct evidence for charm in hadronic interactions using a high-resolution bubble chamber

    CERN Multimedia

    2002-01-01

    A high-resolution rapid-cycling hydrogen bubble chamber will be used to search for direct evidence of charmed-particle production in $\\sim$350 GeV/c $\\pi^{-}$ interactions. The chamber is 20 cm in diameter and contains $\\sim$1l of liquid hydrogen. The bright field optical system is designed to achieve a resolution in space $\\simeq$ 20-30 $\\mu$m (optical depth of field 2-4 mm), which should allow the detection of charmed-particle decay vertices in complex events if $\\tau_{charm} \\geq 10^{-13}$ sec. An interaction trigger will be used to give an initial sensitivity $\\sim$5-10 events/$\\mu$b for a test run designed primarily to search for the signal and establish a cross-section and approximate lifetime for charm.

  8. Bright upconversion luminescence and increased Tc in CaBi{sub 2}Ta{sub 2}O{sub 9}:Er high temperature piezoelectric ceramics

    Energy Technology Data Exchange (ETDEWEB)

    Peng Dengfeng [Functional Materials Research Laboratory, Tongji University, 1239 Siping Road, Shanghai 200092 (China); National Institute of Advanced Industrial Science and Technology, Kyushu, 807-1 Shuku, Tosu, Saga 841-0052 (Japan); Wang Xusheng; Yao Xi [Functional Materials Research Laboratory, Tongji University, 1239 Siping Road, Shanghai 200092 (China); Xu Chaonan [National Institute of Advanced Industrial Science and Technology, Kyushu, 807-1 Shuku, Tosu, Saga 841-0052 (Japan); Lin Jian; Sun Tiantuo [College of Material Science and Engineering, Tongji University, 4800 Cao' an Highway, Shanghai 201804 (China)

    2012-05-15

    Er{sup 3+} doped CaBi{sub 2}Ta{sub 2}O{sub 9} (CBT) bismuth layered-structure high temperature piezoelectric ceramics were synthesized by the traditional solid state method. The upconversion (UC) emission properties of Er{sup 3+} doped CBT ceramics were investigated as a function of Er{sup 3+} concentration and incident pump power. A bright green upconverted emission was obtained under excitation 980 nm at room temperature. The observed strong green and weak red emission bands corresponded to the transitions from {sup 4}S{sub 3/2} and {sup 4}F{sub 9/2} to {sup 4}I{sub 15/2}, respectively. The dependence of UC emission intensity on pumping power indicated that a three-photon process was involved in UC emissions. Studies of dielectric with temperature have also been carried out. Introduction of Er increased the Curie temperature of CBT, thus, making this ceramic suitable for sensor applications at higher temperatures. Because of its strong up-converted emission and increased Tc, the multifunctional high temperature piezoelectric ceramic may be useful in high temperature sensor, fluorescence thermometry, and optical-electro integration applications.

  9. Theory and simulation of high-brightness electron beam production from laser-irradiated photocathodes in the presence of dc and RF electric fields

    Science.gov (United States)

    Jones, M. E.; Peter, W.

    1986-05-01

    To take advantage of properties of laser-controlled photodiodes to produce electron beams, a new set of diode design criteria are needed. An analytical and numerical study of the geometrical and temporal factors that affect the design of high-brightness electron beams is presented. This study extends our previous work on this concept to include the effects of laser pulse shape, and emittance effects in the presence of RF fields. In general, the diode will not be space-charge limited. Therefore, the conventional Pierce electrode shapes are not appropriate. Furthermore, the finite temporal profile of the electron beams introduces a time-dependent space charge into the design problem. The approach taken here to minimize the emittance growth from the temporal profile of the space charge is to operate at low perveance. To obtain high currents, large electric fields are required. We exploit the fact that the electron emission is controlled by the laser and is independent of the voltage on the diode. The diode can then be driven by an rf field. In principle, operating at higher frequency al lows higher breakdown limits, so the perveance can be made very small. However, operating at too high an RF frequency introduces other detrimental effects.

  10. Development of TEM and SEM high brightness electron guns using cold-field emission from a carbon nanotip

    Energy Technology Data Exchange (ETDEWEB)

    Houdellier, F.; Knoop, L. de; Gatel, C.; Masseboeuf, A. [CEMES-CNRS, 29 Rue Jeanne Marvig, 31055 Toulouse (France); Mamishin, S.; Taniguchi, Y. [Hitachi High-Technologies Corporation, 882, Ichige, Hitachinaka, Ibaraki 312-8504 (Japan); Delmas, M.; Monthioux, M.; Hÿtch, M.J.; Snoeck, E. [CEMES-CNRS, 29 Rue Jeanne Marvig, 31055 Toulouse (France)

    2015-04-15

    A newly developed carbon cone nanotip (CCnT) has been used as field emission cathode both in low voltage SEM (30 kV) electron source and high voltage TEM (200 kV) electron source. The results clearly show, for both technologies, an unprecedented stability of the emission and the probe current with almost no decay during 1 h, as well as a very small noise (rms less than 0.5%) compared to standard sources which use tungsten tips as emitting cathode. In addition, quantitative electric field mapping around the FE tip have been performed using in situ electron holography experiments during the emission of the new tip. These results show the advantage of the very high aspect ratio of the new CCnT which induces a strong enhancement of the electric field at the apex of the tip, leading to very small extraction voltage (some hundred of volts) for which the field emission will start. The combination of these experiments with emission current measurements has also allowed to extract an exit work function value of 4.8 eV. - Highlights: • We develop a new field emission cathode based on carbon material. • We determine the exit work function of this new cathode using a combination of in situ electron holography and finite element modeling. • We show that the stability of cold-field emitted current can be improved with no decay during one hour of emission with a lower emission noise (less than 0.5%). • We used this cathode both for 200 kV TEM and 30 kV SEM cold field emission source. • As a TEM source, we also observe an increase of the spatial coherence using Fresnel fringes contrast.

  11. Non-Invasive Measurement of Emittance and Optical Parameters for High-Brightness Hadron Beams in a Synchrotron

    CERN Document Server

    Jansson, A

    2001-01-01

    For hadron colliders, such as the Large Hadron Collider at CERN, emittance preservation is of prime importance to achieve a high luminosity. Since there are no significant effects (apart from active cooling) that decrease the emittance of a hadron beam, the smallest possible emittance is set by the source, and has to be preserved along the entire injector chain. One possible source of emittance increase is due to optical mismatch at beam transfer between two machines in this chain. To verify the matching on-line requires a non-invasive instrument capable of measuring the optical parameters of the injected beam. Such instruments are very rare. A quadrupole pick-up is a non-invasive instrument sensitive to beam size. It is basically a beam position monitor, where the non-linear response to particle position is used to extract information on the second moment of the transverse beam distribution. The basic idea was proposed a long time ago, and have been successfully used at a few occasions, but have not found an...

  12. A photometric monitoring of bright high-amplitude delta Scuti stars. II. Period updates for seven stars

    CERN Document Server

    Derekas, A; Székely, P; Alfaro, E J; Csák, B; Mészáros, S; Rodríguez, E; Rolland, A; Sarneczky, K; Szabó, G M; Szatmary, K; Varadi, M; Kiss, C; Meszaros, Sz.; Szabo, Gy.M.; Kiss, Cs.

    2003-01-01

    We present new photometric data for seven high-amplitude delta Scuti stars. The observations were acquired between 1996 and 2002, mostly in the Johnson photometric system. For one star (GW UMa), our observations are the first since the discovery of its pulsational nature from the Hipparcos data.The primary goal of this project was to update our knowledge on the period variations of the target stars. For this, we have collected all available photometric observations from the literature and constructed decades-long O-C diagrams of the stars. This traditional method is useful because of the single-periodic nature of the light variations. Text-book examples of slow period evolution (XX Cyg, DY Her, DY Peg) and cyclic period changes due to light-time effect (LITE) in a binary system (SZ Lyn) are updated with the new observations. For YZ Boo, we find a period decrease instead of increase. The previously suggested LITE-solution of BE Lyn (Kiss & Szatmary 1995) is not supported with the new O-C diagram. Instead o...

  13. Self-consistent simulation of radiation and space-charge in high-brightness relativistic electron beams

    Science.gov (United States)

    Gillingham, David R.

    2007-12-01

    The ability to preserve the quality of relativistic electron beams through transport bend elements such as a bunch compressor chicane is increasingly difficult as the current increases because of effects such as coherent synchrotron radiation (CSR) and space-charge. Theoretical CSR models and simulations, in their current state, often make unrealistic assumptions about the beam dynamics and/or structures. Therefore, we have developed a model and simulation that contains as many of these elements as possible for the purpose of making high-fidelity end-to-end simulations. Specifically, we are able to model, in a completely self-consistent, three-dimensional manner, the sustained interaction of radiation and space-charge from a relativistic electron beam in a toroidal waveguide with rectangular cross-section. We have accomplished this by combining a time-domain field solver that integrates a paraxial wave equation valid in a waveguide when the dimensions are small compared to the bending radius with a particle-in-cell dynamics code. The result is shown to agree with theory under a set of constraints, namely thin rigid beams, showing the stimulation resonant modes and including comparisons for waveguides approximating vacuum, and parallel plate shielding. Using a rigid beam, we also develop a scaling for the effect of beam width, comparing both our simulation and numerical integration of the retarded potentials. We further demonstrate the simulation calculates the correct longitudinal space-charge forces to produce the appropriate potential depression for a converging beam in a straight waveguide with constant dimensions. We then run fully three-dimensional, self-consistent end-to-end simulations of two types of bunch compressor designs, illustrating some of the basic scaling properties and perform a detailed analysis of the output phase-space distribution. Lastly, we show the unique ability of our simulation to model the evolution of charge/energy perturbations on a

  14. Real-Time Observation of Laser Heated Metals with High Brightness Monochromatic X-Ray Techniques at Present and Their Future Prospects

    Science.gov (United States)

    Daido, H.; Shobu, T.; Yamada, T.; Yamashita, S.; Sugihara, K.; Nishimura, A.; Muramatsu, T.

    We present the x-ray techniques for characterizing laser heated metals for welding and cutting techniques. At present, with an undulator (70 keV) as well as bending magnet (30 keV) sources at SPring-8 as a probe source, CW 300 W Ytterbium fiber laser irradiates an Aluminum slab as a sample. Simultaneously the x-ray beam probes the sample for real time observation of a molten pool. We observe the convection indicated by the motion of tungsten based particles as a tracer in the molten pool. During the cooling phase, the molten metal is solidified with residual stresses which are affected by the heating and convection processes. In this experiment the time and space resolution are ˜milli-second and several tens of μm, respectively. On the other hand, microscopic short transient phenomena also play a significant role for the quality of a solidified material. For this purpose, we need high energy short pulse x-ray sources. We try to discuss on the capability and limitation of present x-ray sources and the prospect of an ultra high brightness x-ray source as a complementary source for full characterization of the laser heated and cooling processes of metals.

  15. LARGER PLANET RADII INFERRED FROM STELLAR ''FLICKER'' BRIGHTNESS VARIATIONS OF BRIGHT PLANET-HOST STARS

    Energy Technology Data Exchange (ETDEWEB)

    Bastien, Fabienne A.; Stassun, Keivan G.; Pepper, Joshua [Physics and Astronomy Department, Vanderbilt University, 1807 Station B, Nashville, TN 37235 (United States)

    2014-06-10

    Most extrasolar planets have been detected by their influence on their parent star, typically either gravitationally (the Doppler method) or by the small dip in brightness as the planet blocks a portion of the star (the transit method). Therefore, the accuracy with which we know the masses and radii of extrasolar planets depends directly on how well we know those of the stars, the latter usually determined from the measured stellar surface gravity, log g. Recent work has demonstrated that the short-timescale brightness variations ({sup f}licker{sup )} of stars can be used to measure log g to a high accuracy of ∼0.1-0.2 dex. Here, we use flicker measurements of 289 bright (Kepmag < 13) candidate planet-hosting stars with T {sub eff} = 4500-6650 K to re-assess the stellar parameters and determine the resulting impact on derived planet properties. This re-assessment reveals that for the brightest planet-host stars, Malmquist bias contaminates the stellar sample with evolved stars: nearly 50% of the bright planet-host stars are subgiants. As a result, the stellar radii, and hence the radii of the planets orbiting these stars, are on average 20%-30% larger than previous measurements had suggested.

  16. Tunable High Brightness Semiconductor Sources

    Science.gov (United States)

    2015-05-01

    along with calculated diffraction pattern, rep- resenting faithful reproduction material composition and layer thickness. Inset is as example surface...Chen, and J. Tian, “Nonlinear optical properties of graphene-based materials,” Chin. Sci. Bull ., vol. 57, pp. 2971–2982, 2012. [67] X. Zhang, Z. Liu...211909, 2011. [77] B. C. A. Das and A. K. Sood, “Raman spectroscopy of graphene on different substrates and influence of defects,” Bull . Mater. Sci, vol

  17. Single-Layer Halide Perovskite Light-Emitting Diodes with Sub-Band Gap Turn-On Voltage and High Brightness.

    Science.gov (United States)

    Li, Junqiang; Shan, Xin; Bade, Sri Ganesh R; Geske, Thomas; Jiang, Qinglong; Yang, Xin; Yu, Zhibin

    2016-10-03

    Charge-carrier injection into an emissive semiconductor thin film can result in electroluminescence and is generally achieved by using a multilayer device structure, which requires an electron-injection layer (EIL) between the cathode and the emissive layer and a hole-injection layer (HIL) between the anode and the emissive layer. The recent advancement of halide perovskite semiconductors opens up a new path to electroluminescent devices with a greatly simplified device structure. We report cesium lead tribromide light-emitting diodes (LEDs) without the aid of an EIL or HIL. These so-called single-layer LEDs have exhibited a sub-band gap turn-on voltage. The devices obtained a brightness of 591 197 cd m(-2) at 4.8 V, with an external quantum efficiency of 5.7% and a power efficiency of 14.1 lm W(-1). Such an advancement demonstrates that very high efficiency of electron and hole injection can be obtained in perovskite LEDs even without using an EIL or HIL.

  18. Beam extraction dynamics at the space-charge-limit of the high brightness E-XFEL electron source at DESY-PITZ

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Ye; Gjonaj, Erion; Weiland, Thomas [TEMF, Technische Universitaet Darmstadt, Schlossgartenstrasse 8, 64289 Darmstadt (Germany)

    2015-07-01

    The physics of the photoemission, as one of the key issues for successful operation of linac based free-electron lasers like the European X-ray Free Electron Laser (E-XFEL) and the Free-electron Laser in Hamburg (FLASH), is playing an increasingly important role in the high brightness DESY-PITZ electron source. We study photoemission physics and discuss full three-dimensional numerical modeling of the electron bunch emission. The beam extraction dynamics at the photocathode has been investigated through the 3D fully electromagnetic (EM) Particle-in-Cell (PIC) solver of CST Particle Studio under the assumption of the photoemission source operating at or close to its space charge limit. PIC simulation results have shown good agreements with measurements on total emitted bunch charge for distinct experimental parameters. Further comparisons showed a general failure for the conventional Poisson solver based tracking algorithm to correctly predict the beam dynamics at the space charge limit. It is furthermore found, that fully EM PIC simulations are also consistent with a simple emission model based on the multidimensional Child-Langmuir law.

  19. A major merger origin for the high fraction of galaxies at 2bright clumps in the VIMOS Ultra-Deep Survey

    CERN Document Server

    Ribeiro, B; Cassata, P; Garilli, B; Lemaux, B C; Maccagni, D; Schaerer, D; Tasca, L A M; Zamorani, G; Zucca, E; Amorín, R; Bardelli, S; Hathi, N P; Koekemoer, A; Pforr, J

    2016-01-01

    (Abridged) The properties of stellar clumps in star forming galaxies and their evolution over the redshift range $2\\lesssim z \\lesssim 6$ are presented and discussed in the context of the build-up of massive galaxies at early cosmic times. We use HST/ACS images of galaxies with spectroscopic redshifts from the VIMOS Ultra Deep Survey (VUDS) to identify clumps within a 20 kpc radius. We find that the population of galaxies with more than one clump is dominated by galaxies with two clumps, representing $\\sim21-25$\\% of the population, while the fraction of galaxies with 3, or 4 and more, clumps is 8-11 and 7-9\\%, respectively. The fraction of clumpy galaxies is in the range $\\sim35-55\\%$ over $2high up to the highest redshifts. The large and bright clumps (M$_{\\star}\\sim10^9$ up to $\\sim10^{10}$M$_\\odot$) are found to reside predominantly in galaxies with two clumps. Smaller and lower luminosity clumps ($\\log...

  20. A Direct DME High Temperature PEM Fuel Cell

    DEFF Research Database (Denmark)

    Vassiliev, Anton; Jensen, Jens Oluf; Li, Qingfeng

    2012-01-01

    Dimethyl ether (DME) has been identified as an alternative to methanol for use in direct fuel cells. It combines the advantages of hydrogen in terms of pumpless fuel delivery and high energy density like methanol, but without the toxicity of the latter. The performance of a direct dimethyl ether...

  1. Evidence for Ubiquitous, High-EW Nebular Emission in z~7 Galaxies: Towards a Clean Measurement of the Specific Star Formation Rate using a Sample of Bright, Magnified Galaxies

    CERN Document Server

    Smit, R; Labbe, I; Zheng, W; Bradley, L; Donahue, M; Lemze, D; Moustakas, J; Umetsu, K; Zitrin, A; Coe, D; Postman, M; Gonzalez, V; Bartelmann, M; Benitez, N; Broadhurst, T; Ford, H; Grillo, C; Infante, L; Jimenez-Teja, Y; Jouvel, S; Kelson, D D; Lahav, O; Maoz, D; Medezinski, E; Melchior, P; Meneghetti, M; Merten, J; Molino, A; Moustakas, L; Nonino, M; Rosati, P; Seitz, S

    2013-01-01

    Growing observational evidence now indicates that nebular line emission has a significant impact on the rest-frame optical fluxes of z~5-7 galaxies observed with Spitzer. This line emission makes z~5-7 galaxies appear more massive, with lower specific star formation rates. However, corrections for this line emission have been very difficult to perform reliably due to huge uncertainties on the overall strength of such emission at z>~5.5. Here, we present the most direct observational evidence yet for ubiquitous high-EW [OIII]+Hbeta line emission in Lyman-break galaxies at z~7, while also presenting a strategy for an improved measurement of the sSFR at z~7. We accomplish this through the selection of bright galaxies in the narrow redshift window z~6.6-7.0 where the IRAC 4.5 micron flux provides a clean measurement of the stellar continuum light. Observed 4.5 micron fluxes in this window contrast with the 3.6 micron fluxes which are contaminated by the prominent [OIII]+Hbeta lines. To ensure a high S/N for our I...

  2. Two-direction refinable functions and two direction wavelets with high approximation order and regularity

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    The concept of two-direction refinable functions and two-direction wavelets is introduced.We investigate the existence of distributional(or L2-stable) solutions of the two-direction refinement equation: φ(x)=∑p+kφ(mx-k)+∑p-kφ(k-mx) where m ≥ 2 is an integer. Based on the positive mask {pk+} and negative mask {p-k}, the conditions that guarantee the above equation has compactly distributional solutions or L2-stable solutions are established. Furthermore, the condition that the L2-stable solution of the above equation can generate a two-direction MRA is given. The support interval of φ(x) is discussed amply. The definition of orthogonal two-direction refinable function and orthogonal two-direction wavelets is presented, and the orthogonality criteria for two-direction refinable functions are established. An algorithm for constructing orthogonal two-direction refinable functions and their two-direction wavelets is presented. Another construction algorithm for two-direction L2-refinable functions, which have nonnegative symbol masks and possess high approximation order and regularity, is presented. Finally, two construction examples are given.

  3. CA BrightStor

    Institute of Scientific and Technical Information of China (English)

    2007-01-01

    CA推出的BrightStor系列存储管理解决方案已经成为企业电子商务体系架构管理战略中举足轻重的组成部分。BrightStor是一整套企业级的智能化存储管理解决方案,定位在存储硬件设备和上层应用之间,通过各种集成化的产品和工具为驻留在企业任何位置的数据提供全方位的、有效的存储管理和保护。

  4. Bright Economic Prospects

    Institute of Scientific and Technical Information of China (English)

    Zhang Minqiu

    2004-01-01

    @@ India is expected to register an 8.2% growth rate for the 2003-04 fiscal year. The overall economic situation this year has been satisfactory despite the scaled down 6-6.5% growth rate for the new fiscal year due to oil price hikes, reduced monsoon volume and some 7% inflation. Judging from the following factors, bright prospects are in store for the country down the road.

  5. Microlens array-based high-gain screen design for direct projection head-up displays.

    Science.gov (United States)

    Hedili, M Kivanc; Freeman, Mark O; Urey, Hakan

    2013-02-20

    Head-up display (HUD) systems have been used in recent car models to provide essential information to the drivers while keeping their eyes on the road. Virtual image HUD systems have been the preferred method, but they have the drawback of requiring a large volume of space in order to accommodate the relay optics that creates the virtual image. This is especially significant as the desired field of view increases. Direct projection HUD systems have been developed with a separate stand-alone microlens array (MLA)-based transparent screen on the dashboard, offering a compact solution. In this paper, we propose a direct projection HUD system based on a unique, windshield-embedded see-through screen that uses minimal space under the dashboard, offering an elegant and compact solution to the HUD problem. The screen is based on MLAs with varying surface normal angles such that the light from the projector is directed to the viewer's eyes from all positions across the field of view. Varying tilts provide an efficient relay and high brightness even with a low-lumen output projector. The calculated screen gain is about 69 and the eyebox area is about 30 cm×30 cm.

  6. Stability of Bright Solitons in Bose-Einstein Condensates

    Institute of Scientific and Technical Information of China (English)

    YU Hui-You; YAN Jia-Ren; XIE Qiong-Tao

    2004-01-01

    We investigate the stability of bright solitons in Bose-Einstein condensates by including a feeding term and a loss one in the Gross-Pitaevskii equation. Based on the direct approach of perturbation theory for the nonlinear Schrodinger equation, we give the explicit dependence of the height and other related quantities of bright solitons on the feeding and loss term. It is found that the three-body recombination loss plays a crucial role in stabilizing bright solitons.

  7. Direct drive digital servo press with high parallel control

    Science.gov (United States)

    Murata, Chikara; Yabe, Jun; Endou, Junichi; Hasegawa, Kiyoshi

    2013-12-01

    Direct drive digital servo press has been developed as the university-industry joint research and development since 1998. On the basis of this result, 4-axes direct drive digital servo press has been developed and in the market on April of 2002. This servo press is composed of 1 slide supported by 4 ball screws and each axis has linearscale measuring the position of each axis with high accuracy less than μm order level. Each axis is controlled independently by servo motor and feedback system. This system can keep high level parallelism and high accuracy even with high eccentric load. Furthermore the 'full stroke full power' is obtained by using ball screws. Using these features, new various types of press forming and stamping have been obtained by development and production. The new stamping and forming methods are introduced and 'manufacturing' need strategy of press forming with high added value and also the future direction of press forming are also introduced.

  8. Retrieval of Maps of PM2.5 Aerosol in the Problematic California Valleys: Bright, Speckled Reflectances, Thin AOT, but High Pollution

    Science.gov (United States)

    Chatfield, R. B.

    2015-12-01

    The San Joaquin Valley suffers from severe episodes of respirable aerosol (PM2.5) in wintertime. We provide maps of aerosol episodes using daily snapshots of PM2.5 and its changing features despite numerous difficulties inherent to sampling the region, with special focus on the DISCOVER-AQ period, Jan-Feb 2013, which had many supporting measurements. Both high pollution and retrieval difficulties tend to occur in many Mediterranean agricultural regions. One difficulty is the relatively bright surfaces with considerable exposed soil. NASA's MAIAC and MODIS Deep Blue retrieval techniques are shown to have considerable skill even at low aerosol optical thickness (AOT) values, as evaluated by concurrent AERONET sunphotometer measurements. More significantly, these AOT values can correspond to high daytime PM2.5 since aerosol mixed layer depth is thin and variable, 200m - 600 m. The thin layers derive from typical subsidence of dry air between more stormy periods. This situation provides an advantage: water vapor column is also almost completely limited to a similar mixed layer depth, and can thus serve as a measure of aerosol dilution. The ratio of AOT to column-water-vapor from MODIS products provides two advantages: (1) it can provide a measure related to particle density, via a mixed-layer proxy, and (2) it can ratio out some errors that crop up in the retrieval of very low AOT, e.g. bidirectional reflectance and other angular dependences. These effects are combined, so we disentangle them using AERONET data. Data from the NASA Langley HSRL-2 lidar and in-situ measurements from DISCOVER-AQ are also helpful. At the time of abstract submission, sporadic errors in the column water estimates provide the greatest limitation. Looking to the near future, we suggest why the use of geostationary TEMPO data will allow multiple sampling opportunities per day, supplementary or alternative information for AOT, aerosol absorption, and even column water.

  9. THE HIGH-VELOCITY SYSTEM: INFALL OF A GIANT LOW-SURFACE-BRIGHTNESS GALAXY TOWARD THE CENTER OF THE PERSEUS CLUSTER

    Energy Technology Data Exchange (ETDEWEB)

    Yu, Alice P.-Y.; Lim, Jeremy; Chan, Jeffrey C.-C. [Department of Physics, The University of Hong Kong, Pokfulam Road (Hong Kong); Ohyama, Youichi [Institute of Astronomy and Astrophysics, Academia Sinica, Taipei 10617, Taiwan (China); Broadhurst, T. [Department of Theoretical Physics, University of Basque Country UPV/EHU, Bilbao (Spain)

    2015-12-01

    The high-velocity system (HVS) lies just north-west of the center and is moving at a speed of 3000 km s{sup −1} toward NGC 1275, the central giant elliptical galaxy in the Perseus cluster. We report imaging spectroscopy of the HVS in Hα and [N ii] that resolves both the nature of this galaxy and its physical relationship with NGC 1275. The HVS exhibits a distorted disk having a projected rotational velocity that rises steadily to ∼200 km s{sup −1} at a radius of ∼12 kpc, the same maximal extent detectable in neutral gas and dust. We discover highly blueshifted emission at relative velocities of up to ∼800 km s{sup −1} distributed throughout and confined almost entirely within the projected area of the disk, tracing gas stripped by ram pressure. The distribution of the stripped gas implies that the HVS is moving essentially along our sightline closely toward the center of NGC 1275. We show that the speed of the HVS is consistent with it having fallen from rest at the virial radius of the Perseus cluster and reached ∼100 kpc from the cluster center. Despite having an overall metallicity (inferred from [N ii]/Hα) significantly lower than that of star-forming disk galaxies, the HVS exhibits a current star formation rate of ∼3.6 M{sub ⊙} yr{sup −1} and numerous young star clusters projected against giant H ii regions. The evidence assembled implicates a progenitor giant low-surface-brightness galaxy that, because of galaxy harassment and/or the cluster tidal field, has developed two prominent spiral arms along which star formation is strongly elevated.

  10. Efficient, high-brightness wavelength-beam-combined commercial off-the-shelf diode stacks achieved by use of a wavelength-chirped volume Bragg grating.

    Science.gov (United States)

    Chann, B; Goyal, A K; Fan, T Y; Sanchez-Rubio, A; Volodin, B L; Ban, V S

    2006-05-01

    We report a method of scaling the spatial brightness from commercial off-the-shelf diode laser stacks through wavelength beam combining, by use of a linearly wavelength-chirped volume Bragg grating (VBG). Using a three-bar commercial stack of broad-area lasers and a VBG, we demonstrate 89.5 W cw of beam-combined output with a beam-combining efficiency of 75%. The output beam has a propagation factor M2 approximately 26 on the slow axis and M2 approximately 21 on the fast axis. This corresponds to a brightness of approximately 20 MW/cm2 sr. To our knowledge, this is the highest brightness broad-area diode laser system. We achieve 81% coupling efficiency into a 100 microm, 0.22 N.A. fiber.

  11. Effect of Interior Chromaticness on Space Brightness

    Directory of Open Access Journals (Sweden)

    Hidenari Takada

    2011-05-01

    Full Text Available To design a lighting environment, horizontal illuminance is generally used as the brightness of a room. But it is reported that a subjective brightness does not always match the horizontal illuminance. For example, the room furnished with high saturated colored objects is perceived brighter than the room furnished with achromatic objects, even though the horizontal illuminance is the same. To investigate a effect of interior chromaticness on space brightness, we conducted the experiment in four miniature rooms that were different in terms of chromaticness of interior decorating surfaces, but kept lightness of surfaces constant. Subjects were asked to set the illuminance of reference room, that is furnished with achromatic objects, to equate the brightness of the test room, that is with chromatic objects. Four of seven subjects needed less illuminance to get the equality of space brightness if the test room had a saturated objects. The illuminance ratio of test to reference room was about 1.4. Other three subjects set the illuminance of reference room almost equal to test room. Thus, there are differences between individuals so further work would be needed to estimate the quantitative effect of interior chromaticness on space brightness.

  12. Evidence for ubiquitous high-equivalent-width nebular emission in z ∼ 7 galaxies: toward a clean measurement of the specific star-formation rate using a sample of bright, magnified galaxies

    Energy Technology Data Exchange (ETDEWEB)

    Smit, R.; Bouwens, R. J.; Labbé, I. [Leiden Observatory, Leiden University, NL-2300 RA Leiden (Netherlands); Zheng, W.; Lemze, D.; Ford, H. [Department of Physics and Astronomy, The Johns Hopkins University, 3400 North Charles Street, Baltimore, MD 21218 (United States); Bradley, L.; Coe, D.; Postman, M. [Space Telescope Science Institute, 3700 San Martin Drive, Baltimore, MD 21208 (United States); Donahue, M. [Department of Physics and Astronomy, Michigan State University, East Lansing, MI 48824 (United States); Moustakas, J. [Siena College, 515 Loudon Road, Loudonville, NY 12211 (United States); Umetsu, K. [Institute of Astronomy and Astrophysics, Academia Sinica, P. O. Box 23-141, Taipei 10617, Taiwan (China); Zitrin, A.; Bartelmann, M. [Institut fur Theoretische Astrophysik, ZAH, Albert-Ueberle-Straß e 2, 69120 Heidelberg (Germany); Gonzalez, V. [Department of Physics and Astronomy, University of California, Riverside, CA 92521 (United States); Benítez, N.; Jimenez-Teja, Y. [Instituto de Astrofisica de Andalucia (CSIC), C/Camino Bajo de Huetor 24, Granada 18008 (Spain); Broadhurst, T. [Department of Theoretical Physics, University of the Basque Country, P. O. Box 644, 48080 Bilbao (Spain); Grillo, C. [Dark Cosmology Centre, Niels Bohr Institute, University of Copenhagen, Juliane Maries Vej 30, DK-2100 Copenhagen (Denmark); Infante, L. [Departamento de Astronoia y Astrofisica, Pontificia Universidad Catolica de Chile, V. Mackenna 4860, Santiago 22 (Chile); and others

    2014-03-20

    Growing observational evidence indicates that nebular line emission has a significant impact on the rest-frame optical fluxes of z ∼ 5-7 galaxies. This line emission makes z ∼ 5-7 galaxies appear more massive, with lower specific star-formation rates (sSFRs). However, corrections for this line emission have been difficult to perform reliably because of huge uncertainties on the strength of such emission at z ≳ 5.5. In this paper, we present the most direct observational evidence thus far for ubiquitous high-equivalent-width (EW) [O III] + Hβ line emission in Lyman-break galaxies at z ∼ 7, and we present a strategy for an improved measurement of the sSFR at z ∼ 7. We accomplish this through the selection of bright galaxies in the narrow redshift window z ∼ 6.6-7.0 where the Spitzer/Infrared Array Camera (IRAC) 4.5 μm flux provides a clean measurement of the stellar continuum light, in contrast with the 3.6 μm flux, which is contaminated by the prominent [O III] + Hβ lines. To ensure a high signal-to-noise ratio for our IRAC flux measurements, we consider only the brightest (H {sub 160} < 26 mag) magnified galaxies we have identified behind galaxy clusters. It is remarkable that the mean rest-frame optical color for our bright seven-source sample is very blue, [3.6]-[4.5] = –0.9 ± 0.3. Such blue colors cannot be explained by the stellar continuum light and require that the rest-frame EW of [O III] + Hβ is greater than 637 Å for the average source. The four bluest sources from our seven-source sample require an even more extreme EW of 1582 Å. We can also set a robust lower limit of ≳ 4 Gyr{sup –1} on the sSFR of our sample based on the mean spectral energy distribution.

  13. High density semiconductor nanodots by direct laser fabrication

    Science.gov (United States)

    Haghizadeh, Anahita; Yang, Haeyeon

    2016-03-01

    We report a direct method of fabricating high density nanodots on the GaAs(001) surfaces using laser irradiations on the surface. Surface images indicate that the large clumps are not accompanied with the formation of nanodots even though its density is higher than the critical density above which detrimental large clumps begin to show up in the conventional Stranski-Krastanov growth technique. Atomic force microscopy is used to image the GaAs(001) surfaces that are irradiated by high power laser pulses interferentially. The analysis suggests that high density quantum dots be fabricated directly on semiconductor surfaces.

  14. Cell-free measurements of brightness of fluorescently labeled antibodies

    Science.gov (United States)

    Zhou, Haiying; Tourkakis, George; Shi, Dennis; Kim, David M.; Zhang, Hairong; Du, Tommy; Eades, William C.; Berezin, Mikhail Y.

    2017-02-01

    Validation of imaging contrast agents, such as fluorescently labeled imaging antibodies, has been recognized as a critical challenge in clinical and preclinical studies. As the number of applications for imaging antibodies grows, these materials are increasingly being subjected to careful scrutiny. Antibody fluorescent brightness is one of the key parameters that is of critical importance. Direct measurements of the brightness with common spectroscopy methods are challenging, because the fluorescent properties of the imaging antibodies are highly sensitive to the methods of conjugation, degree of labeling, and contamination with free dyes. Traditional methods rely on cell-based assays that lack reproducibility and accuracy. In this manuscript, we present a novel and general approach for measuring the brightness using antibody-avid polystyrene beads and flow cytometry. As compared to a cell-based method, the described technique is rapid, quantitative, and highly reproducible. The proposed method requires less than ten microgram of sample and is applicable for optimizing synthetic conjugation procedures, testing commercial imaging antibodies, and performing high-throughput validation of conjugation procedures.

  15. Bright conjugated polymer nanoparticles containing a biodegradable shell produced at high yields and with tuneable optical properties by a scalable microfluidic device.

    Science.gov (United States)

    Abelha, T F; Phillips, T W; Bannock, J H; Nightingale, A M; Dreiss, C A; Kemal, E; Urbano, L; deMello, J C; Green, M; Dailey, L A

    2017-02-02

    This study compares the performance of a microfluidic technique and a conventional bulk method to manufacture conjugated polymer nanoparticles (CPNs) embedded within a biodegradable poly(ethylene glycol) methyl ether-block-poly(lactide-co-glycolide) (PEG5K-PLGA55K) matrix. The influence of PEG5K-PLGA55K and conjugated polymers cyano-substituted poly(p-phenylene vinylene) (CN-PPV) and poly(9,9-dioctylfluorene-2,1,3-benzothiadiazole) (F8BT) on the physicochemical properties of the CPNs was also evaluated. Both techniques enabled CPN production with high end product yields (∼70-95%). However, while the bulk technique (solvent displacement) under optimal conditions generated small nanoparticles (∼70-100 nm) with similar optical properties (quantum yields ∼35%), the microfluidic approach produced larger CPNs (140-260 nm) with significantly superior quantum yields (49-55%) and tailored emission spectra. CPNs containing CN-PPV showed smaller size distributions and tuneable emission spectra compared to F8BT systems prepared under the same conditions. The presence of PEG5K-PLGA55K did not affect the size or optical properties of the CPNs and provided a neutral net electric charge as is often required for biomedical applications. The microfluidics flow-based device was successfully used for the continuous preparation of CPNs over a 24 hour period. On the basis of the results presented here, it can be concluded that the microfluidic device used in this study can be used to optimize the production of bright CPNs with tailored properties with good reproducibility.

  16. Research on Brightness Measurement of Intense Electron Beam

    CERN Document Server

    Wang, Yuan; Zhang, Huang; Yang, GuoJun; Li, YiDing; Li, Jin

    2015-01-01

    The mostly research fasten on high emission density of injector to study electron beam's brightness in LIA. Using the injector(2MeV) was built to research brightness of multi-pulsed high current(KA) electron beam, and researchs three measurement method (the pepper-pot method, beam collimator without magnetic field, beam collimator with magnetic field method) to detect beam's brightness with time-resolved measurement system.

  17. High Temperature 300°C Directional Drilling System

    Energy Technology Data Exchange (ETDEWEB)

    Chatterjee, Kamalesh [Baker Hughes Oilfield Operations, Houston, TX (United States); Aaron, Dick [Baker Hughes Oilfield Operations, Houston, TX (United States); Macpherson, John [Baker Hughes Oilfield Operations, Houston, TX (United States)

    2015-07-31

    Many countries around the world, including the USA, have untapped geothermal energy potential. Enhanced Geothermal Systems (EGS) technology is needed to economically utilize this resource. Temperatures in some EGS reservoirs can exceed 300°C. To effectively utilize EGS resources, an array of injector and production wells must be accurately placed in the formation fracture network. This requires a high temperature directional drilling system. Most commercial services for directional drilling systems are rated for 175°C while geothermal wells require operation at much higher temperatures. Two U.S. Department of Energy (DOE) Geothermal Technologies Program (GTP) projects have been initiated to develop a 300°C capable directional drilling system, the first developing a drill bit, directional motor, and drilling fluid, and the second adding navigation and telemetry systems. This report is for the first project, “High Temperature 300°C Directional Drilling System, including drill bit, directional motor and drilling fluid, for enhanced geothermal systems,” award number DE-EE0002782. The drilling system consists of a drill bit, a directional motor, and drilling fluid. The DOE deliverables are three prototype drilling systems. We have developed three drilling motors; we have developed four roller-cone and five Kymera® bits; and finally, we have developed a 300°C stable drilling fluid, along with a lubricant additive for the metal-to-metal motor. Metal-to-metal directional motors require coatings to the rotor and stator for wear and corrosion resistance, and this coating research has been a significant part of the project. The drill bits performed well in the drill bit simulator test, and the complete drilling system has been tested drilling granite at Baker Hughes’ Experimental Test Facility in Oklahoma. The metal-to-metal motor was additionally subjected to a flow loop test in Baker Hughes’ Celle Technology Center in Germany, where it ran for more than 100

  18. Direct photon production in high-energy nuclear collisions

    NARCIS (Netherlands)

    Peitzmann, T.

    2016-01-01

    Direct photons have always been considered a promising probe for the very early phases of high-energy nuclear collisions. Prompt photons reveal information about the initial state and its possible modifications in nuclei. In this context they should be one of the best probes for effects of gluon sat

  19. Detection of solar-like oscillations in the bright red giant stars $\\gamma$ Psc and $\\theta^1$ Tau from a 190-day high-precision spectroscopic multisite campaign

    CERN Document Server

    Beck, P G; Hillen, M; Corsaro, E; Van Winckel, H; Moravveji, E; De Ridder, J; Bloemen, S; Saesen, S; Mathias, P; Degroote, P; Kallinger, T; Verhoelst, T; Ando, H; Carrier, F; Acke, B; Oreiro, R; Miglio, A; Eggenberger, P; Sato, B; Zwintz, K; Pápics, P I; Marcos-Arenal, P; Fuentes, S A Sans; Schmid, V S; Waelkens, C; Østensen, R; Matthews, J M; Yoshida, M; Izumiura, H; Koyano, H; Nagayama, S; Shimizu, Y; Okada, N; Okita, K; Sakamoto, A; Yamamuro, T; Aerts, C

    2014-01-01

    Red giants are evolved stars which exhibit solar-like oscillations. Although a multitude of stars have been observed with space telescopes, only a handful of red-giant stars were targets of spectroscopic asteroseismic observing projects. We search for solar-like oscillations in the two bright red-giant stars $\\gamma$ Psc and $\\theta^1$ Tau from time series of ground-based spectroscopy and determine the frequency of the excess of oscillation power $\

  20. High Voltage Bi-directional Flyback Converter for Capacitive Actuator

    DEFF Research Database (Denmark)

    Thummala, Prasanth; Zhang, Zhe; Andersen, Michael A. E.

    2013-01-01

    This paper presents a high voltage DC-DC converter topology for bi-directional energy transfer between a low voltage DC source and a high voltage capacitive load. The topology is a bi-directional flyback converter with variable switching frequency control during the charge mode, and constant...... switching frequency control during the discharge mode. The converter is capable of charging the capacitive load from 24 V DC source to 2.5 kV, and discharges it to 0 V. The flyback converter has been analyzed in detail during both charge and discharge modes, by considering all the parasitic elements...... in the converter, including the most dominating parameters of the high voltage transformer viz., self-capacitance and leakage inductance. The specific capacitive load for this converter is a dielectric electro active polymer (DEAP) actuator, which can be used as an effective replacement for conventional actuators...

  1. INVESTIGATION ON THE CAUSES OF EUCALYPTUS KRAFT PULP BRIGHTNESS REVERSION

    Directory of Open Access Journals (Sweden)

    Kátia M. M. Eiras

    2005-12-01

    Full Text Available Some high brightness eucalyptus Kraft pulps have shown poor brightness stability. In most cases, the causes have notbeen identified and permanent solutions have not been found. This work focused on evaluating the brightness stability profile of pulpsbleached by in sequences such as O(DC(PODD, O(DC(PODP, OD(PODD, OD(PODP, ODHT(PODD, ODHT(PODP, OA/D(PODD, OA/D(PODP, OAD(PODD and O(ZeD(PO. Brightness stability tests induced by according to Tappi UM200 procedureon samples bleached to 90±0.5% ISO. Brightness stability was measured after each bleaching stage of the various sequences andexpressed as brightness loss in % ISO. The results indicate that pulps bleached with sequences ending with a peroxide stage havehigher brightness stability compared to those ending with a chlorine dioxide stage. Pulps bleached with a standard sequence, initiatingwith a (DC stage, show brightness stability similar to that of pulp bleached by an ECF (Elementary chlorine free sequence initiatingwith a regular D0 stage. ECF sequences, initiated with hot stages produce pulps with higher brightness stability than sequencesinitiating with a regular D0 stage. The profile across the bleaching sequences shows a tendency of increased brightness stability inalkaline stages containing peroxide and decreased stability in those stages containing chlorine and/or chlorine dioxide, parallelingpulp carbonyl group content.

  2. Dark Dunes Over-riding Bright Dunes

    Science.gov (United States)

    2000-01-01

    Some martian sand dunes may be more active than others. In this picture, wind has caused the dark and somewhat crescent-shaped dunes to advance toward the lower left. While their movement cannot actually be seen in this April 1998snapshot, the location of their steepest slopes--their slip faces--on their southwestern sides indicates the direction of movement. Oddly, these dark dunes have moved across and partly cover sets of smaller, bright ridges that also formed by wind action.This Mars Global Surveyor (MGS) Mars Orbiter Camera (MOC) image illustrates an intriguing martian 'find.' Strangely, the two dune types have different shapes and a different relative brightness. There are two explanations for the relationship seen here, and neither can be distinguished as 'the answer'--(1) it is possible that the brighter dunes are old and cemented, and represent some ancient wind activity, whereas the dark dunes are modern and are marching across the older, 'fossilized' dune forms, or (2) the bright dunes are composed of grains that are much larger or more dense than those that compose the dark dunes. In the latter scenario, the bright dunes move more slowly and are over-taken by the dark dunes because their grains are harder to transport. An interpretation involving larger or denser grains is consistent with the small size and even-spacing of the bright dunes, as well, but usually on Earth such features occur on the surfaces of larger, finer-grained dunes, not under them. The actual composition of either the bright or dark materials are unknown. This example is located on the floor of an impact crater in western Arabia Terra at 10.7oN, 351.0oW. The picture is illuminated from the right.

  3. A Direct DME High Temperature PEM Fuel Cell

    DEFF Research Database (Denmark)

    Vassiliev, Anton; Jensen, Jens Oluf; Li, Qingfeng

    2012-01-01

    Dimethyl ether (DME) has been identified as an alternative to methanol for use in direct fuel cells. It combines the advantages of hydrogen in terms of pumpless fuel delivery and high energy density like methanol, but without the toxicity of the latter. The performance of a direct dimethyl ether...... fuel cell suffers greatly from the very low DME-water miscibility. To cope with the problem polybenzimidazole (PBI) based membrane electrode assemblies (MEAs) have been made and tested in a vapor fed system. PtRu on carbon has been used as anode catalyst and air at ambient pressure was used as oxidant...

  4. Direct dimethyl ether high temperature polymer electrolyte membrane fuel cells

    DEFF Research Database (Denmark)

    Vassiliev, Anton; Jensen, Jens Oluf; Li, Qingfeng

    and suffers from low DME solubility in water. When the DME - water mixture is fed as vapour miscibility is no longer a problem. The increased temperature is more beneficial for the kinetics of the direct oxidation of DME than of methanol. The Open Circuit Voltage (OCV) with DME operation was 50 to 100 m......A high temperature polybenzimidazole (PBI) polymer fuel cell was fed with dimethyl ether (DME) and water vapour mixture on the anode at ambient pressure with air as oxidant. A peak power density of 79 mW/cm2 was achieved at 200°C. A conventional polymer based direct DME fuel cell is liquid fed...

  5. Competitive growth of high purity aluminum grains in directional solidification

    Institute of Scientific and Technical Information of China (English)

    ZHANG Jiao; SHU Da; WANG De-lin; SUN Bao-de; CHEN Gang

    2006-01-01

    A self-made directional solidification setup was used to prepare high purity aluminum ingots of 100mm in diameter. The morphology of the growth interface was detected by SEM and AFM, and the grain lattice orientation was detected by XRD. The results indicate that the grains suffer competitive growth under any conditions in experiments. The lattice orientation of the preferred grains is determined by the flow field above the solid-liquid interface. The horizontal lattice position does not change during the growth process. However, the lattice orientation in the growth direction varies with the growth velocity and approaches to [100]gradually during the growth process.

  6. High Efficiency Bi-Directional Converter Used For Renewable System

    Directory of Open Access Journals (Sweden)

    M. Desal Raja

    2014-02-01

    Full Text Available This paper presents an Isolated bi-directional converter for renewable system. Voltage stress and current stress was decreses in switches. Power flows in both side. The proposed converter three phase ac voltage to dc voltage, dc voltage to three phase a.c voltage and synchronous the two voltage source. Silicon carbide diodes and bi-directional switches Mosfet’s are used for decreases the switching loss. LC Series resonant converter connected to the high efficiency. This converter power conversion control by the output voltage information.

  7. Brightness limitations of cold field emitters caused by Coulomb interactions

    NARCIS (Netherlands)

    Cook, B.J.; Verduin, T.; Hagen, C.W.; Kruit, P.

    2010-01-01

    Emission theory predicts that high brightness cold field emitters can enhance imaging in the electron microscope. This (neglecting chromatic aberration) is because of the large (coherent) probe current available from a high brightness source and is based on theoretically determined values of reduced

  8. VERITAS Observations under Bright Moonlight

    CERN Document Server

    ,

    2015-01-01

    The presence of moonlight is usually a limiting factor for imaging atmospheric Cherenkov telescopes due to the high sensitivity of the camera photomultiplier tubes (PMTs). In their standard configuration, the extra noise limits the sensitivity of the experiment to gamma-ray signals and the higher PMT currents also accelerates PMT aging. Since fall 2012, observations have been carried out with VERITAS under bright moonlight (Moon illumination $> 35\\%$), in two observing modes, by reducing the voltage applied to the PMTs and with UV bandpass filters, which allow observations up to $\\sim80\\%$ Moon illumination resulting in $29\\%$ more observing time over the course of the year. In this presentation, we provide details of these new observing modes and their performance relative to the standard VERITAS observations.

  9. Experimental investigation of a directionally enhanced DHX concept for high temperature Direct Reactor Auxiliary Cooling Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hughes, Joel T.; Blandford, Edward D., E-mail: edb@unm.edu

    2016-07-15

    Highlights: • A novel directional heat exchanger design has been developed. • Hydrodynamic tests have been performed on the proposed design. • Heat transfer performance is inferred by hydrodynamic results. • Results are discussed and future work is suggested. - Abstract: The use of Direct Reactor Auxiliary Cooling Systems (DRACSs) as a safety-related decay heat removal system for advanced reactors has developed historically through the Sodium Fast Reactor (SFR) community. Beginning with the EBR-II, DRACSs have been utilized in a large number of past and current SFR designs. More recently, the DRACS has been adopted for Fluoride Salt-Cooled High-Temperature Reactors (FHRs) for similar decay heat removal functions. In this paper we introduce a novel directionally enhanced DRACS Heat Exchanger (DHX) concept. We present design options for optimizing such a heat exchanger so that shell-side heat transfer is enhanced in one primary coolant flow direction and degraded in the opposite coolant flow direction. A reduced-scale experiment investigating the hydrodynamics of a directionally enhanced DHX was built and the data collected is presented. The concept of thermal diodicity is expanded to heat exchanger technologies and used as performance criteria for evaluating design options. A heat exchanger that can perform as such would be advantageous for use in advanced reactor concepts where primary coolant flow reversal is expected during Loss-of-Forced-Circulation (LOFC) accidents where the ability to circulate coolant is compromised. The design could also find potential use in certain advanced Sodium Fast Reactor (SFR) designs utilizing fluidic diode concepts.

  10. High power density reactors based on direct cooled particle beds

    Science.gov (United States)

    Powell, J. R.; Horn, F. L.

    Reactors based on direct cooled High Temperature Gas Cooled Reactor (HTGR) type particle fuel are described. The small diameter particle fuel is packed between concentric porous cylinders to make annular fuel elements, with the inlet coolant gas flowing inwards. Hot exit gas flows out along the central channel of each element. Because of the very large heat transfer area in the packed beds, power densities in particle bed reactors (PBRs) are extremely high resulting in compact, lightweight systems. Coolant exit temperatures are high, because of the ceramic fuel temperature capabilities, and the reactors can be ramped to full power and temperature very rapidly. PBR systems can generate very high burst power levels using open cycle hydrogen coolant, or high continuous powers using closed cycle helium coolant. PBR technology is described and development requirements assessed.

  11. Aqueous synthesis of high bright Ag{sub 2}Se−ZnSe quantum dots with tunable near-infrared emission

    Energy Technology Data Exchange (ETDEWEB)

    Che, Dongchen; Ding, Di [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201602 (China); Wang, Hongzhi, E-mail: wanghz@dhu.edu.cn [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201602 (China); Zhang, Qinghong [State Key Laboratory for Modification of Chemical Fibers and Polymer Materials, College of Materials Science and Engineering, Donghua University, Shanghai 201602 (China); Li, Yaogang, E-mail: yaogang_li@dhu.edu.cn [Engineering Research Center of Advanced Glass Manufacturing Technology, Ministry of Education, Donghua University, Shanghai 201602 (China)

    2016-09-05

    Efficient aqueous synthetic methods for near-infrared quantum dots as bioimaging agents are urgently required. In this work, a simple and fast synthesis of highly luminescent, near-infrared Ag{sub 2}Se quantum dots (QDs) in aqueous media is reported. The method avoids high temperature, pressure and organic solvents to directly generate water-dispersible Ag{sub 2}Se QDs. The photoluminescence emission of Ag{sub 2}Se QDs ranges from 835 to 940 nm by different Ag:Se molar ratio. Using the ZnSe as a shell, the quantum yield reaches up to 42%. The Ag{sub 2}Se−ZnSe QDs with high quantum yield, near-infrared and low cytotoxic could be used as good cell labels, showing great potential applications in bio-imaging. - Highlights: • Ag{sub 2}Se−ZnSe nanocrystals are prepared directly in aqueous media at low temperature. • Ag{sub 2}Se−ZnSe nanocrystals show excellent water solubility and colloidal stability. • Ag{sub 2}Se nanocrystals exhibit tunable near-infrared emission with ultrasmall size. • Ag{sub 2}Se−ZnSe nanocrystals show high quantum yield with low cytotoxicity. • Ag{sub 2}Se−ZnSe nanocrystals are stable over a month at room temperature in the air.

  12. Directly patternable high refractive index ferroelectric sol–gel resist

    Energy Technology Data Exchange (ETDEWEB)

    Garoli, D., E-mail: denis.garoli@iit.it [Istituto Italiano di Tecnologia, Via Morego 16, 16136 Genova (Italy); Della Giustina, G. [Industrial Engineering Department, University of Padova and INSTM, Via Marzolo 9, 35131 Padova (Italy)

    2015-08-15

    The development of a ferroelectric negative tone sol–gel resist for Ultraviolet (UV) and Electron Beam (EB) lithography is presented. A new system based on Lead Zirconate Titanate (PZT, with formula PbZr{sub 0.52}Ti{sub 0.48}O{sub 3}) was synthesized by sol–gel method. The lithographic performances were investigated and several structures spanning from the micron range down to less than 50 nm have been achieved by UV and EB lithography. The system interaction with UV light and Electron beam was thoroughly characterized by FT-IT spectroscopy. The exposed PZT was annealed at high temperatures in order to study the crystalline phase evolution, the optical constants values and stability of patterned structures. After exposure and annealing, the refractive index of the material can vary from 1.68 up to 2.33 (@400 nm), while the ferroelectric behaviour seems to be maintained after high temperature annealing. These results suggest a possible application of PZT resist not only as ferroelectric but also as nanopatternable high refractive index material. Moreover, direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified and the potentiality for the preparation of high aspect ratio hollow nanostructures will be presented. - Highlights: • A new formula directly patternable PZT high refractive index resist is presented. • The gel is sensitive to both UV and electron beam exposure. • The refractive index can vary from 1.68 up to 2.33 (@400 nm). • Direct nanopatterning by means of Focused Ion Beam (FIB) lithography was verified. • High aspect ratio hollow nanostructures will be presented.

  13. High performance computing: Clusters, constellations, MPPs, and future directions

    Energy Technology Data Exchange (ETDEWEB)

    Dongarra, Jack; Sterling, Thomas; Simon, Horst; Strohmaier, Erich

    2003-06-10

    Last year's paper by Bell and Gray [1] examined past trends in high performance computing and asserted likely future directions based on market forces. While many of the insights drawn from this perspective have merit and suggest elements governing likely future directions for HPC, there are a number of points put forth that we feel require further discussion and, in certain cases, suggest alternative, more likely views. One area of concern relates to the nature and use of key terms to describe and distinguish among classes of high end computing systems, in particular the authors use of ''cluster'' to relate to essentially all parallel computers derived through the integration of replicated components. The taxonomy implicit in their previous paper, while arguable and supported by some elements of our community, fails to provide the essential semantic discrimination critical to the effectiveness of descriptive terms as tools in managing the conceptual space of consideration. In this paper, we present a perspective that retains the descriptive richness while providing a unifying framework. A second area of discourse that calls for additional commentary is the likely future path of system evolution that will lead to effective and affordable Petaflops-scale computing including the future role of computer centers as facilities for supporting high performance computing environments. This paper addresses the key issues of taxonomy, future directions towards Petaflops computing, and the important role of computer centers in the 21st century.

  14. Estimating all-sky night brightness maps from finite sets of SQM measurements

    Science.gov (United States)

    Tilve Rúa, V.; Ling, J. F.; Bará, S.; Sánchez de Miguel, A.; Nievas, M.; Zamorano, J.

    2015-05-01

    The all-sky night brightness distributions recorded at observing sites with moderate to high levels of light pollution can be efficiently described by polynomial series or relatively low order. This opens the way for estimating these continuous distributions from discrete sets of measurements made in different directions of the sky with photometric detectors of low spatial resolution as, e.g. the Sky Quality Meter, SQM^{TM} (10° HWHM). Modal estimations of the night sky brightness can be obtained by expanding their equal-area projection maps as a series of orthonormal functions, in particular Zernike polynomials, and fitting the unknown modal coefficients to the measurements provided by the detector. Least squares and minimum variance estimators can be easily developed once the linear functional relationship between the measurements and the actual sky brightness distribution is established.

  15. Aqueous synthesis of high bright and tunable near-infrared AgInSe2-ZnSe quantum dots for bioimaging.

    Science.gov (United States)

    Che, Dongchen; Zhu, Xiaoxu; Wang, Hongzhi; Duan, Yourong; Zhang, Qinghong; Li, Yaogang

    2016-02-01

    Efficient synthetic methods for near-infrared quantum dots with good biophysical properties as bioimaging agents are urgently required. In this work, a simple and fast synthesis of highly luminescent, near-infrared AgInSe2-ZnSe quantum dots (QDs) with tunable emissions in aqueous media is reported. This method avoids high temperature and pressure and organic solvents to directly generate water-dispersible AgInSe2-ZnSe QDs. The photoluminescence emission peak of the AgInSe2-ZnSe QDs ranged from 625 to 940nm, with quantum yields up to 31%. The AgInSe2-ZnSe QDs with high quantum yield, near-infrared and low cytotoxic could be used as good cell labels, showing great potential applications in bio-imaging. Copyright © 2015 Elsevier Inc. All rights reserved.

  16. How Bright Is the Sun?

    Science.gov (United States)

    Berr, Stephen

    1991-01-01

    Presents a sequence of activities designed to allow eighth grade students to deal with one of the fundamental relationships that govern energy distribution. Activities guide students to measure light bulb brightness, discover the inverse square law, compare light bulb light to candle light, and measure sun brightness. (two references) (MCO)

  17. Brightness and darkness as perceptual dimensions.

    Directory of Open Access Journals (Sweden)

    Tony Vladusich

    2007-10-01

    Full Text Available A common-sense assumption concerning visual perception states that brightness and darkness cannot coexist at a given spatial location. One corollary of this assumption is that achromatic colors, or perceived grey shades, are contained in a one-dimensional (1-D space varying from bright to dark. The results of many previous psychophysical studies suggest, by contrast, that achromatic colors are represented as points in a color space composed of two or more perceptual dimensions. The nature of these perceptual dimensions, however, presently remains unclear. Here we provide direct evidence that brightness and darkness form the dimensions of a two-dimensional (2-D achromatic color space. This color space may play a role in the representation of object surfaces viewed against natural backgrounds, which simultaneously induce both brightness and darkness signals. Our 2-D model generalizes to the chromatic dimensions of color perception, indicating that redness and greenness (blueness and yellowness also form perceptual dimensions. Collectively, these findings suggest that human color space is composed of six dimensions, rather than the conventional three.

  18. Minimizing the Bright/Shadow Focal Spot Size with Controlled Side-Lobe Increase in High-Numerical-Aperture Focusing Systems

    Directory of Open Access Journals (Sweden)

    S. N. Khonina

    2013-01-01

    Full Text Available Minimizing the bright/shadow focal spot size for differently polarized incident waves through the additional apodization of the focusing system output pupil by use of an optical element with the vortex phase dependence on angle and the polynomial amplitude dependence on radius is studied. The coefficients of the radial polynomial were optimized with the aim of fulfilling certain conditions such as the energy efficiency preservation and keeping the side lobes under control. The coefficients were chosen so as to minimize the functional using Brent’s method.

  19. Simultaneous brightness contrast of foraging Papilio butterflies.

    Science.gov (United States)

    Kinoshita, Michiyo; Takahashi, Yuki; Arikawa, Kentaro

    2012-05-22

    This study focuses on the sense of brightness in the foraging Japanese yellow swallowtail butterfly, Papilio xuthus. We presented two red discs of different intensity on a grey background to butterflies, and trained them to select one of the discs. They were successfully trained to select either a high intensity or a low intensity disc. The trained butterflies were tested on their ability to perceive brightness in two different protocols: (i) two orange discs of different intensity presented on the same intensity grey background and (ii) two orange discs of the same intensity separately presented on a grey background that was either higher or lower in intensity than the training background. The butterflies trained to high intensity red selected the orange disc of high intensity in protocol 1, and the disc on the background of low intensity grey in protocol 2. We obtained similar results in another set of experiments with purple discs instead of orange discs. The choices of the butterflies trained to low intensity red were opposite to those just described. Taken together, we conclude that Papilio has the ability to learn brightness and darkness of targets independent of colour, and that they have the so-called simultaneous brightness contrast.

  20. A brightness exceeding simulated Langmuir limit

    Energy Technology Data Exchange (ETDEWEB)

    Nakasuji, Mamoru [2-15-11, Serigaya-chou, Kounan-ku, Yokohama-shi, Kanagawa-ken (Japan)

    2013-08-15

    When an excitation of the first lens determines a beam is parallel beam, a brightness that is 100 times higher than Langmuir limit is measured experimentally, where Langmuir limits are estimated using a simulated axial cathode current density which is simulated based on a measured emission current. The measured brightness is comparable to Langmuir limit, when the lens excitation is such that an image position is slightly shorter than a lens position. Previously measured values of brightness for cathode apical radii of curvature 20, 60, 120, 240, and 480 μm were 8.7, 5.3, 3.3, 2.4, and 3.9 times higher than their corresponding Langmuir limits, respectively, in this experiment, the lens excitation was such that the lens and the image positions were 180 mm and 400 mm, respectively. From these measured brightness for three different lens excitation conditions, it is concluded that the brightness depends on the first lens excitation. For the electron gun operated in a space charge limited condition, some of the electrons emitted from the cathode are returned to the cathode without having crossed a virtual cathode. Therefore, method that assumes a Langmuir limit defining method using a Maxwellian distribution of electron velocities may need to be revised. For the condition in which the values of the exceeding the Langmuir limit are measured, the simulated trajectories of electrons that are emitted from the cathode do not cross the optical axis at the crossover, thus the law of sines may not be valid for high brightness electron beam systems.

  1. A survey of luminous high-redshift quasars with SDSS and WISE II. the bright end of the quasar luminosity function at z ~ 5

    CERN Document Server

    Yang, Jinyi; Wu, Xue-Bing; Fan, Xiaohui; McGreer, Ian D; Bian, Fuyan; Yi, Weimin; Yang, Qian; Ai, Yanli; Dong, Xiaoyi; Zuo, Wenwen; Green, Richard; Jiang, Linhua; Wang, Shu; Wang, Ran; Yue, Minghao

    2016-01-01

    This is the second paper in a series on a new luminous z ~ 5 quasar survey using optical and near-infrared colors. Here we present a new determination of the bright end of the quasar luminosity function (QLF) at z ~ 5. Combined our 45 new quasars with previously known quasars that satisfy our selections, we construct the largest uniform luminous z ~ 5 quasar sample to date, with 99 quasars in the range 4.7 <= z < 5.4 and -29 < M1450 <= -26.8, within the Sloan Digital Sky Survey (SDSS) footprint. We use a modified 1/Va method including flux limit correction to derive a binned QLF, and we model the parametric QLF using maximum likelihood estimation. With the faint-end slope of the QLF fixed as alpha = -2.03 from previous deeper samples, the best fit of our QLF gives a flatter bright end slope beta = -3.58+/-0.24 and a fainter break magnitude M*1450 = -26.98+/-0.23 than previous studies at similar redshift. Combined with previous work at lower and higher redshifts, our result is consistent with a lum...

  2. How Bright Can Supernovae Get?

    Science.gov (United States)

    Kohler, Susanna

    2016-04-01

    Supernovae enormous explosions associated with the end of a stars life come in a variety of types with different origins. A new study has examined how the brightest supernovae in the Universe are produced, and what limits might be set on their brightness.Ultra-Luminous ObservationsRecent observations have revealed many ultra-luminous supernovae, which haveenergies that challenge our abilities to explain them usingcurrent supernova models. An especially extreme example is the 2015 discovery of the supernova ASASSN-15lh, which shone with a peak luminosity of ~2*1045 erg/s, nearly a trillion times brighter than the Sun. ASASSN-15lh radiated a whopping ~2*1052 erg in the first four months after its detection.How could a supernova that bright be produced? To explore the answer to that question, Tuguldur Sukhbold and Stan Woosley at University of California, Santa Cruz, have examined the different sources that could produce supernovae and calculated upper limits on the potential luminosities ofeach of these supernova varieties.Explosive ModelsSukhbold and Woosley explore multiple different models for core-collapse supernova explosions, including:Prompt explosionA stars core collapses and immediately explodes.Pair instabilityElectron/positron pair production at a massive stars center leads to core collapse. For high masses, radioactivity can contribute to delayed energy output.Colliding shellsPreviously expelled shells of material around a star collide after the initial explosion, providing additional energy release.MagnetarThe collapsing star forms a magnetar a rapidly rotating neutron star with an incredibly strong magnetic field at its core, which then dumps energy into the supernova ejecta, further brightening the explosion.They then apply these models to different types of stars.Setting the LimitThe authors show that the light curve of ASASSN-15lh (plotted in orange) can be described by a model (black curve) in which a magnetar with an initial spin period of 0.7 ms

  3. High voltage direct current modelling in optimal power flows

    Energy Technology Data Exchange (ETDEWEB)

    Ambriz-Perez, H. [Comision Federal de Electricidad, Mexico, Unidad de Ingenieria Especializada, Rio Rodano No. 14 - Piso 10, Sala 1002, Col. Cuauhtemoc, C.P. 06598, Mexico, D.F. (Mexico); Acha, E. [Department of Electronics and Electrical Engineering, University of Glasgow, Glasgow G128LT, Scotland (United Kingdom); Fuerte-Esquivel, C.R. [Faculty of Electrical Engineering, Universidad Michoacana de San Nicolas de Hidalgo, Morelia 58030, Michoacan (Mexico)

    2008-03-15

    Two-terminal high voltage direct current (HVDC) transmission links are in operation throughout the world. They are key elements in electrical power networks; their representation is oversimplified or ignored in most power system studies. This is particularly the case in Optima Power Flow (OPF) studies. Hence, an OPF program has been extended to incorporate HVDC links, taking due account of overlapping and power transfer control characteristics. This is a new development in Newton Optimal Power Flows, where the converter equations are included directly in the matrix W. The method is indeed a unified one since the solution vector is extended to accommodate the DC variables. The HVDC link model correctly takes into account the relevant DC limit variables. The impact of HVDC links on OPF studies is illustrated by numeric examples, which includes a 5-node system, the AEP 14-node and a 166-node system. (author)

  4. Direct Measurement of Thermal Fluctuation of High-Q Pendulum

    CERN Document Server

    Agatsuma, Kazuhiro; Yamamoto, Kazuhiro; Ohashi, Masatake; Kawamura, Seiji; Miyoki, Shinji; Miyakawa, Osamu; Telada, Souichi; Kuroda, Kazuaki

    2009-01-01

    We achieved for the first time a direct measurement of the thermal fluctuation of a pendulum in an off-resonant region using a laser interferometric gravitational wave detector. These measurements have been well identified for over one decade by an agreement with a theoretical prediction, which was derived by a fluctuation-dissipation theorem. Thermal fluctuation is dominated by the contribution of resistances in coil-magnet actuator circuits. When we tuned these resistances, the noise spectrum also changed according to a theoretical prediction. The measured thermal noise level corresponds to a high quality factor on the order of 10^5 of the pendulum.

  5. High-power lasers for directed-energy applications.

    Science.gov (United States)

    Sprangle, Phillip; Hafizi, Bahman; Ting, Antonio; Fischer, Richard

    2015-11-01

    In this article, we review and discuss the research programs at the Naval Research Laboratory (NRL) on high-power lasers for directed-energy (DE) applications in the atmosphere. Physical processes affecting propagation include absorption/scattering, turbulence, and thermal blooming. The power levels needed for DE applications require combining a number of lasers. In atmospheric turbulence, there is a maximum intensity that can be placed on a target that is independent of the initial beam spot size and laser beam quality. By combining a number of kW-class fiber lasers, scientists at the NRL have successfully demonstrated high-power laser propagation in a turbulent atmosphere and wireless recharging. In the NRL experiments, four incoherently combined fiber lasers having a total power of 5 kW were propagated to a target 3.2 km away. These successful high-power experiments in a realistic atmosphere formed the basis of the Navy's Laser Weapon System. We compare the propagation characteristics of coherently and incoherently combined beams without adaptive optics. There is little difference in the energy on target between coherently and incoherently combined laser beams for multi-km propagation ranges and moderate to high levels of turbulence. Unlike incoherent combining, coherent combining places severe constraints on the individual lasers. These include the requirement of narrow power spectral linewidths in order to have long coherence times as well as polarization alignment of all the lasers. These requirements are extremely difficult for high-power lasers.

  6. Benchmarking of 3D space charge codes using direct phase space measurements from photoemission high voltage DC gun

    CERN Document Server

    Bazarov, Ivan V; Gulliford, Colwyn; Li, Yulin; Liu, Xianghong; Sinclair, Charles K; Soong, Ken; Hannon, Fay

    2008-01-01

    We present a comparison between space charge calculations and direct measurements of the transverse phase space for space charge dominated electron bunches after a high voltage photoemission DC gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit setup for a set of parameters such as charge per bunch and the solenoid current. The data is compared with detailed simulations using 3D space charge codes GPT and Parmela3D with initial particle distributions created from the measured transverse and temporal laser profiles. Beam brightness as a function of beam fraction is calculated for the measured phase space maps and found to approach the theoretical maximum set by the thermal energy and accelerating field at the photocathode.

  7. Benchmarking of 3D space charge codes using direct phase space measurements from photoemission high voltage dc gun

    Directory of Open Access Journals (Sweden)

    Ivan V. Bazarov

    2008-10-01

    Full Text Available We present a comparison between space charge calculations and direct measurements of the transverse phase space of space charge dominated electron bunches from a high voltage dc photoemission gun followed by an emittance compensation solenoid magnet. The measurements were performed using a double-slit emittance measurement system over a range of bunch charge and solenoid current values. The data are compared with detailed simulations using the 3D space charge codes GPT and Parmela3D. The initial particle distributions were generated from measured transverse and temporal laser beam profiles at the photocathode. The beam brightness as a function of beam fraction is calculated for the measured phase space maps and found to approach within a factor of 2 the theoretical maximum set by the thermal energy and the accelerating field at the photocathode.

  8. Directionality Evidence in High Andean Forest Early Successional Process

    Directory of Open Access Journals (Sweden)

    Manuel Eduardo Lequerica Támara

    2017-01-01

    Full Text Available Secondary growth forests have increased their extension in the last decades, and have been suggested as potential conservation reservoirs. The objective of this study was to evaluate diversity and vegetation composition in pastures and forests at (Granada, Cundinamarca, Colombia to assess if successional processes show evidence of directionality, we placed six plots by 0.1-ha in the forest edges, one towards the forest and other to the abandoned paddocks in three locations. We determined the average vegetation structure, diversity, and floristic composition for each plot. We found that diversity is significantly higher in forest plots than in paddock plots (at early succession stage in high Andean cloud ecosystems. The successional stage of each one of the study sites was characterized using non-metric multidimensional scaling. This analysis shows that vegetation tends to group in function of age groups more that it does by geographic location of the plots, suggesting succession is a directional process. Seedling recruitment was not significantly different between forest edge and forest interior. An inverse relation was found between floristic and geographic distances, reflecting the fact that matrix discontinuity is a limiting factor for seed dispersal, thus it is a barrier for high Andean cloud forest succession.

  9. 百瓦级高亮度光纤耦合半导体激光模块的研制%Reaearch on High Brightness Fiber Coupled Diode Laser Module with Hundred Watts Class Output Power

    Institute of Scientific and Technical Information of China (English)

    郝明明; 朱洪波; 秦莉; 宁永强; 刘云; 张志军; 王立军

    2012-01-01

    Three 976 nm diode laser short bars were used as submodule to manufacture high brightness fiber coupled module with CW hundred watts class output power. First, beam transform systems were employed to shape beams emitted from each submodlue; Second, the three beams were stacked in direction of lower beam parameter product by means of spatial multiplexing technology; Finally, the laser was focused into a mullimode fiber with 200 \\xm core diameter and NA =0. 22 by optimized Ien9. Experiment result showed that divergence angle of the focused laser beam was 24. 8° and its beam waist diameter was 175. 2 |xm; laser output from fiber could reach to 107 W, equalizing brightness of 2.23 MW/(cm2 ? Sr) , which is a higher level in China. Furthermore, the wall plug efficiency is 43. 1 % when driving current is 52.5 A, which is far higher than that of solid state laser. Finally the thermal resistance was computed by means of measuring spectrum with different current and the result is 1. 29 K/W which indicates favorable heat dissipation of the module. All of theresult showed that the module can be used in the field of pumping fiber lasers, medical, material processing and so on.%用3只976 nm半导体激光短列阵作为子模块,研制出连续工作的百瓦级高亮度光纤耦合模块.首先,利用光束转换器将每个半导体激光短列阵进行光束整形;然后采用空间复用技术将3个半导体激光短列阵在光参数积小的方向上叠加,并利用倒置伽利略望远镜作为扩束器进一步压缩发散角;最后利用优化结构的透镜组将激光聚焦到芯径200μm,数值孔径为0.22的光纤中.测量结果显示:聚焦后激光的发散角为24.8°,焦平面的光斑尺寸为175.2 μm;耦合后测量光纤出光功率可达107W,对应亮度为2.23 MW/( cm2·sr),达到了国内利用列阵进行光纤耦合的领先水平;在工作电流为52.5 A时,电光转换效率为43.1%,远高于全固态等激光器;最后测量本模块

  10. Optical monitoring of high power direct diode laser cladding

    Science.gov (United States)

    Liu, Shuang; Farahmand, Parisa; Kovacevic, Radovan

    2014-12-01

    Laser cladding is one of the most advanced surface modification techniques which can be used to build and repair high-value components. High power direct diode laser (HPDDL) offers unique quality and cost advantages over other lasers (CO2, Nd:YAG). Especially its rectangular laser beam with top-hat intensity distribution makes HPDDL an ideal tool for large area cladding. In order to utilize this technique successfully, the development of on-line monitoring and process control is necessary. In this study, an optical monitoring system consisting of a high-speed CCD camera, a pyrometer, and an infrared camera was used to analyze the mass- and heat-transfer in the cladding process. The particle transport in flight was viewed by a high-speed CCD camera; the interaction between powder flow and laser beam was observed by an infrared camera; and the thermal behavior of the molten pool was recorded by the pyrometer and the infrared camera. The effects of the processing parameters on the laser attenuation, particle heating and clad properties were investigated based on the obtained signals. The optical monitoring method improved the understanding about mutual interrelated phenomena in the cladding process.

  11. Aftereffect of Adaptation to Illusory Brightness

    OpenAIRE

    Xinguang Cao; Hiroyuki Ito

    2011-01-01

    Several figures are known to induce illusory brightness. We tested whether adaptation to illusory brightness produced an aftereffect in brightness. After viewing a gray square area having illusory brightness (e.g., due to brightness contrast or illusory contours) for ten seconds, the illusion-inducing surround vanished. After three seconds, subjects reported whether the square area was seen as brighter than, darker than, or the same brightness as a control gray square area. The luminance of t...

  12. Brightness of synchrotron radiation from wigglers

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2014-12-15

    According to literature, while calculating the brightness of synchrotron radiation from wigglers, one needs to account for the so called 'depth-of-field' effects. In fact, the particle beam cross section varies along the wiggler. It is usually stated that the effective photon source size increases accordingly, while the brightness is reduced. Here we claim that this is a misconception originating from an analysis of the wiggler source based on geometrical arguments, regarded as almost self-evident. According to electrodynamics, depth-of-field effects do not exist: we demonstrate this statement both theoretically and numerically, using a well-known first-principle computer code. This fact shows that under the usually accepted approximations, the description of the wiggler brightness turns out to be inconsistent even qualitatively. Therefore, there is a need for a well-defined procedure for computing the brightness from a wiggler source. We accomplish this task based on the use of a Wigner function formalism. In the geometrical optics limit computations can be performed analytically. Within this limit, we restrict ourselves to the case of the beam size-dominated regime, which is typical for synchrotron radiation facilities in the X-ray wavelength range. We give a direct demonstration of the fact that the apparent horizontal source size is broadened in proportion to the beamline opening angle and to the length of the wiggler. While this effect is well-understood, a direct proof appears not to have been given elsewhere. We consider the problem of the calculation of the wiggler source size by means of numerical simulations alone, which play the same role of an experiment. We report a significant numerical disagreement between exact calculations and approximations currently used in literature.

  13. The nature of solar brightness variations

    Science.gov (United States)

    Shapiro, A. I.; Solanki, S. K.; Krivova, N. A.; Cameron, R. H.; Yeo, K. L.; Schmutz, W. K.

    2017-09-01

    Determining the sources of solar brightness variations1,2, often referred to as solar noise3, is important because solar noise limits the detection of solar oscillations3, is one of the drivers of the Earth's climate system4,5 and is a prototype of stellar variability6,7—an important limiting factor for the detection of extrasolar planets. Here, we model the magnetic contribution to solar brightness variability using high-cadence8,9 observations from the Solar Dynamics Observatory (SDO) and the Spectral And Total Irradiance REconstruction (SATIRE)10,11 model. The brightness variations caused by the constantly evolving cellular granulation pattern on the solar surface were computed with the Max Planck Institute for Solar System Research (MPS)/University of Chicago Radiative Magnetohydrodynamics (MURaM)12 code. We found that the surface magnetic field and granulation can together precisely explain solar noise (that is, solar variability excluding oscillations) on timescales from minutes to decades, accounting for all timescales that have so far been resolved or covered by irradiance measurements. We demonstrate that no other sources of variability are required to explain the data. Recent measurements of Sun-like stars by the COnvection ROtation and planetary Transits (CoRoT)13 and Kepler14 missions uncovered brightness variations similar to that of the Sun, but with a much wider variety of patterns15. Our finding that solar brightness variations can be replicated in detail with just two well-known sources will greatly simplify future modelling of existing CoRoT and Kepler as well as anticipated Transiting Exoplanet Survey Satellite16 and PLAnetary Transits and Oscillations of stars (PLATO)17 data.

  14. VCA Direct-Drive High Speed and Precision XY Table

    Institute of Scientific and Technical Information of China (English)

    ZHAO Xingyu; FENG Xiaomei; ZHANG Dawei

    2007-01-01

    In order to compensate for the limitation of conventional XY table used in semiconductor integrated circuits(IC) packaging and improve its speed and accuracy, a voice coil actuator (VCA)direct-drive high-speed and precision positioning XY table used in wire bonder was proposed. Also, a novel flexible decoupling mechanism was used in the positioning table, and the small moving mass enabled the positioning table to move at high speed and precision. XY table deformation interference caused by assembly error and instant interference generated by dynamic load moving with high speed and acceleration can be eliminated through the flexible decoupling mechanism. Considering the positioning table as lumped mass spring system, the dynamic equations of the mechanical sys-tem and the VCA were built according to the Newton mechanics principle and electromagnetic theory. Then the electromechanical coupling control model of the system was created through Laplace transform. Based on displacement PID controller, the Icop-locked controlling algorithm of the positioning system was investigated. The dynamic control algorithm effectively improved the system dynamic performance. The precision test of the prototype machine was carried out, and the results val-idated the correctness of the model and the theory. Compared with traditional XY table, the tablehas higher speed, acceleration and positioning accuracy.

  15. High-pressure direct synthesis of aluminium nitride

    CERN Document Server

    Bockowski, M; Grzegory, I; Krukowski, S; Wróblewski, M; Porowski, S

    2002-01-01

    We report the results of direct synthesis of aluminium nitride (AlN) under high nitrogen pressure up to 1 GPa and temperatures up to 2000 K. At pressure from 10 to 650 MPa we observe the combustion synthesis of AlN. As the result of the combustion process one can obtain the AlN sintered powder or AlN/Al metal matrix composites. For N sub 2 pressure higher than 650 MPa the crystal growth of AlN from the solution of atomic nitrogen in aluminium is possible. Both needle-like and bulk AlN single crystals, up to 1 cm and 1 mm, respectively, have been obtained.

  16. High-power diode lasers and their direct industrial applications

    Science.gov (United States)

    Loosen, Peter; Treusch, Hans-Georg; Haas, C. R.; Gardenier, U.; Weck, Manfred; Sinnhoff, V.; Kasperowski, S.; vor dem Esche, R.

    1995-04-01

    The paper summarizes activities of the two Fraunhofer-Institutes ILT and IPT concerning the development of high-power laser-diode stacks and their direct industrial applications. With microchannel coolers in copper technology and ultra-precision machined micro-optics a stack of 330 - 400 W total power with a maximum intensity of the focused beam of 2 104 W/cm2 has been built and tested in first applications. By further improvements of the lens-fabrication and -alignment technology as well as increase of the number of stacked diodes an output power in the kW-range and intensities up to about 105 W/cm2 shall be achieved in the near future. Applications of such laser sources in surface technology, in the processing of plastics, in laser-assisted machining and in brazing are discussed.

  17. Highly sensitive detection of Staphylococcus aureus directly from patient blood.

    Directory of Open Access Journals (Sweden)

    Padmapriya P Banada

    Full Text Available BACKGROUND: Rapid detection of bloodstream infections (BSIs can be lifesaving. We investigated the sample processing and assay parameters necessary for highly-sensitive detection of bloodstream bacteria, using Staphylococcus aureus as a model pathogen and an automated fluidic sample processing-polymerase chain reaction (PCR platform as a model diagnostic system. METHODOLOGY/PRINCIPAL FINDINGS: We compared a short 128 bp amplicon hemi-nested PCR and a relatively shorter 79 bp amplicon nested PCR targeting the S. aureus nuc and sodA genes, respectively. The sodA nested assay showed an enhanced limit of detection (LOD of 5 genomic copies per reaction or 10 colony forming units (CFU per ml blood over 50 copies per reaction or 50 CFU/ml for the nuc assay. To establish optimal extraction protocols, we investigated the relative abundance of the bacteria in different components of the blood (white blood cells (WBCs, plasma or whole blood, using the above assays. The blood samples were obtained from the patients who were culture positive for S. aureus. Whole blood resulted in maximum PCR positives with sodA assay (90% positive as opposed to cell-associated bacteria (in WBCs (71% samples positive or free bacterial DNA in plasma (62.5% samples positive. Both the assays were further tested for direct detection of S. aureus in patient whole blood samples that were contemporaneous culture positive. S. aureus was detected in 40/45 of culture-positive patients (sensitivity 89%, 95% CI 0.75-0.96 and 0/59 negative controls with the sodA assay (specificity 100%, 95% CI 0.92-1. CONCLUSIONS: We have demonstrated a highly sensitive two-hour assay for detection of sepsis causing bacteria like S. aureus directly in 1 ml of whole blood, without the need for blood culture.

  18. Spatial Model of Sky Brightness Magnitude in Langkawi Island, Malaysia

    Science.gov (United States)

    Redzuan Tahar, Mohammad; Kamarudin, Farahana; Umar, Roslan; Khairul Amri Kamarudin, Mohd; Hazmin Sabri, Nor; Ahmad, Karzaman; Rahim, Sobri Abdul; Sharul Aikal Baharim, Mohd

    2017-03-01

    Sky brightness is an essential topic in the field of astronomy, especially for optical astronomical observations that need very clear and dark sky conditions. This study presents the spatial model of sky brightness magnitude in Langkawi Island, Malaysia. Two types of Sky Quality Meter (SQM) manufactured by Unihedron are used to measure the sky brightness on a moonless night (or when the Moon is below the horizon), when the sky is cloudless and the locations are at least 100 m from the nearest light source. The selected locations are marked by their GPS coordinates. The sky brightness data obtained in this study were interpolated and analyzed using a Geographic Information System (GIS), thus producing a spatial model of sky brightness that clearly shows the dark and bright sky areas in Langkawi Island. Surprisingly, our results show the existence of a few dark sites nearby areas of high human activity. The sky brightness of 21.45 mag arcsec{}-2 in the Johnson-Cousins V-band, as the average of sky brightness equivalent to 2.8 × {10}-4{cd} {{{m}}}-2 over the entire island, is an indication that the island is, overall, still relatively dark. However, the amount of development taking place might reduce the number in the near future as the island is famous as a holiday destination.

  19. Spatial Model of Sky Brightness Magnitude in Langkawi Island, Malaysia

    Science.gov (United States)

    Redzuan Tahar, Mohammad; Kamarudin, Farahana; Umar, Roslan; Khairul Amri Kamarudin, Mohd; Sabri, Nor Hazmin; Ahmad, Karzaman; Rahim, Sobri Abdul; Sharul Aikal Baharim, Mohd

    2017-03-01

    Sky brightness is an essential topic in the field of astronomy, especially for optical astronomical observations that need very clear and dark sky conditions. This study presents the spatial model of sky brightness magnitude in Langkawi Island, Malaysia. Two types of Sky Quality Meter (SQM) manufactured by Unihedron are used to measure the sky brightness on a moonless night (or when the Moon is below the horizon), when the sky is cloudless and the locations are at least 100 m from the nearest light source. The selected locations are marked by their GPS coordinates. The sky brightness data obtained in this study were interpolated and analyzed using a Geographic Information System (GIS), thus producing a spatial model of sky brightness that clearly shows the dark and bright sky areas in Langkawi Island. Surprisingly, our results show the existence of a few dark sites nearby areas of high human activity. The sky brightness of 21.45 mag arcsec{}-2 in the Johnson-Cousins V-band, as the average of sky brightness equivalent to 2.8 × {10}-4{cd} {{{m}}}-2 over the entire island, is an indication that the island is, overall, still relatively dark. However, the amount of development taking place might reduce the number in the near future as the island is famous as a holiday destination.

  20. Using Quasi-3D OSIRIS simulations of LWFA to study generating high brightness electron beams using ionization and density downramp injection

    Science.gov (United States)

    Dalichaouch, Thamine; Davidson, Asher; Xu, Xinlu; Yu, Peicheng; Tsung, Frank; Mori, Warren; Li, Fei; Zhang, Chaojie; Lu, Wei; Vieira, Jorge; Fonseca, Ricardo

    2016-10-01

    In the past few decades, there has been much progress in theory, simulation, and experiment towards using Laser wakefield acceleration (LWFA) as the basis for designing and building compact x-ray free-electron-lasers (XFEL) as well as a next generation linear collider. Recently, ionization injection and density downramp injection have been proposed and demonstrated as a controllable injection scheme for creating higher quality and ultra-bright relativistic electron beams using LWFA. However, full-3D simulations of plasma-based accelerators are computationally intensive, sometimes taking 100 millions of core-hours on today's computers. A more efficient quasi-3D algorithm was developed and implemented into OSIRIS using a particle-in-cell description with a charge conserving current deposition scheme in r - z and a gridless Fourier expansion in ϕ. Due to the azimuthal symmetry in LWFA, quasi-3D simulations are computationally more efficient than 3D cartesian simulations since only the first few harmonics in are needed ϕ to capture the 3D physics of LWFA. Using the quasi-3D approach, we present preliminary results of ionization and down ramp triggered injection and compare the results against 3D LWFA simulations. This work was supported by DOE and NSF.

  1. High brightness extreme ultraviolet (at 13.5 nm) emission from time-of-flight controlled discharges with coaxial fuel injection

    Science.gov (United States)

    Hosokai, Tomonao; Yokoyama, Takuma; Zhidkov, Alexei; Sato, Hiroto; Horioka, Kazuhiko; Hotta, Eiki

    2008-09-01

    Extreme ultraviolet (EUV) emission from discharge produced plasma with the coaxial injection of fuel vapor (tin and lithium) produced by laser ablation is experimentally studied. Multiple plasma pinches preceding a strong and long recombination radiation of EUV are observed in the first half cycle of a sinusoidal discharge current. Due to the time-of-flight control type of the discharge, the shape of pinch radiation pulses is almost identical. With the coaxial injection of time-of-flight controlled discharges, the highest brightness of EUV emission (maximum extracted energy of 244.3 mJ/2π sr per pulse with the emitter size of ˜1×0.3 mm2 in full width at half maximum) is provided with efficiency exceeding 2% of deposited energy into the plasma (or 1% of dissipated energy in the discharge) due to a much better matching with the optimal plasma parameters in the recombination regime and a decrease in the off-duty factor. Stability of emitting plasma of the repetitive pinches is essentially improved with use of a second laser pulse.

  2. High strength alumina produced by direct coagulation casting

    Energy Technology Data Exchange (ETDEWEB)

    Baader, F.H.; Will, J.; Tieche, D. [Swiss Federal Institute of Technology, Zuerich (Switzerland)

    1995-09-01

    Direct Coagulation Casting is a new colloidal forming technique. Double layer stabilized, concentrated alumina suspensions are solidified by shifting the suspensions pH from 4 towards the isoelectric point at 9 using the in situ enzyme-catalyzed decomposition of urea. This reaction minimizes the repulsive forces between the suspended particles. The remaining, attractive Van der Waals forces form a stiff particle network. Suspensions with low viscosities (0.3 Pa*s, 59 vol%) were prepared at pH 4. Deagglomeration of the suspensions by ball milling reduced the agglomerate size below 5 pm. The coagulation kinetics could be influenced either by the urease concentration or by the suspension temperature. Process variables were established, providing long idle times, which allowed additional filtration and degassing steps. Coagulation was followed by drying and sintering, whereby densities of more than 3.97 g/cm{sup 3}, a 4-point bending strength of 685 MPa (HIPed) and a high reliablility (m = 40) for high purity alumina were achieved. DCC has the potential to improve the reliability of alumina components of complex shape, as well as to avoid expensive molding.

  3. Directed PCR-free engineering of highly repetitive DNA sequences

    Directory of Open Access Journals (Sweden)

    Preissler Steffen

    2011-09-01

    Full Text Available Abstract Background Highly repetitive nucleotide sequences are commonly found in nature e.g. in telomeres, microsatellite DNA, polyadenine (poly(A tails of eukaryotic messenger RNA as well as in several inherited human disorders linked to trinucleotide repeat expansions in the genome. Therefore, studying repetitive sequences is of biological, biotechnological and medical relevance. However, cloning of such repetitive DNA sequences is challenging because specific PCR-based amplification is hampered by the lack of unique primer binding sites resulting in unspecific products. Results For the PCR-free generation of repetitive DNA sequences we used antiparallel oligonucleotides flanked by restriction sites of Type IIS endonucleases. The arrangement of recognition sites allowed for stepwise and seamless elongation of repetitive sequences. This facilitated the assembly of repetitive DNA segments and open reading frames encoding polypeptides with periodic amino acid sequences of any desired length. By this strategy we cloned a series of polyglutamine encoding sequences as well as highly repetitive polyadenine tracts. Such repetitive sequences can be used for diverse biotechnological applications. As an example, the polyglutamine sequences were expressed as His6-SUMO fusion proteins in Escherichia coli cells to study their aggregation behavior in vitro. The His6-SUMO moiety enabled affinity purification of the polyglutamine proteins, increased their solubility, and allowed controlled induction of the aggregation process. We successfully purified the fusions proteins and provide an example for their applicability in filter retardation assays. Conclusion Our seamless cloning strategy is PCR-free and allows the directed and efficient generation of highly repetitive DNA sequences of defined lengths by simple standard cloning procedures.

  4. Final Report on DTRA Basic Research Project #BRCALL08-Per3-C-2-0006 "High-Z Non-Equilibrium Physics and Bright X-ray Sources with New Laser Targets"

    Energy Technology Data Exchange (ETDEWEB)

    Colvin, Jeffrey D. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2016-06-01

    This project had two major goals. Final Goal: obtain spectrally resolved, absolutely calibrated x-ray emission data from uniquely uniform mm-scale near-critical-density high-Z plasmas not in local thermodynamic equilibrium (LTE) to benchmark modern detailed atomic physics models. Scientific significance: advance understanding of non-LTE atomic physics. Intermediate Goal: develop new nano-fabrication techniques to make suitable laser targets that form the required highly uniform non-LTE plasmas when illuminated by high-intensity laser light. Scientific significance: advance understanding of nano-science. The new knowledge will allow us to make x-ray sources that are bright at the photon energies of most interest for testing radiation hardening technologies, the spectral energy range where current x-ray sources are weak. All project goals were met.

  5. A Compact, High Power Capable, and Tunable High Directivity Microstrip Coupler.

    Science.gov (United States)

    Sohn, Sung-Min; Gopinath, Anand; Vaughan, John Thomas

    2016-10-01

    A coupler is an indispensable component to sample the forward and reflected power for the real-time radio frequency (RF) power monitoring system. The directivity of a coupler is a critical factor to achieve accurate RF power measurements. This paper proposes a microstrip coupler with a tunable high directivity circuit to accurately measure the reflected RF power. The directivity tuner composed of passive components adjusts phase and amplitude of the coupled RF signal, and cancel out the leakage signal from the RF input port at the coupled reflection port. The experimental results, which agree with simulation results, show that the microstrip coupler with the directivity tuner circuit has a compact size (~ 0.07 λg x 0.05 λg), high power capability (up to 1 kW), and high directivities (more than 40 dB) at operating frequency bands (f = 297.3 MHz, 400 MHz, and 447 MHz, respectively) for magnetic resonance imaging (MRI) applications.

  6. Low dimensional neutron moderators for enhanced source brightness

    DEFF Research Database (Denmark)

    Mezei, Ferenc; Zanini, Luca; Takibayev, Alan;

    2014-01-01

    In a recent numerical optimization study we have found that liquid para-hydrogen coupled cold neutron moderators deliver 3–5 times higher cold neutron brightness at a spallation neutron source if they take the form of a flat, quasi 2-dimensional disc, in contrast to the conventional more voluminous...... for cold neutrons. This model leads to the conclusions that the optimal shape for high brightness para-hydrogen neutron moderators is the quasi 1-dimensional tube and these low dimensional moderators can also deliver much enhanced cold neutron brightness in fission reactor neutron sources, compared...

  7. Bright Streaks and Dark Fans

    Science.gov (United States)

    2007-01-01

    The south polar region of Mars is covered every year by a layer of carbon dioxide ice. In a region called the 'cryptic terrain,' the ice is translucent and sunlight can penetrate through the ice to warm the surface below. The ice layer sublimates (evaporates) from the bottom. The dark fans of dust seen in this image come from the surface below the layer of ice, carried to the top by gas venting from below. The translucent ice is 'visible' by virtue of the effect it has on the tone of the surface below, which would otherwise have the same color and reflectivity as the fans. Bright streaks in this image are fresh frost. The CRISM team has identified the composition of these streaks to be carbon dioxide. Observation Geometry Image PSP_003113_0940 was taken by the High Resolution Imaging Science Experiment (HiRISE) camera onboard the Mars Reconnaissance Orbiter spacecraft on 26-Mar-2007. The complete image is centered at -85.8 degrees latitude, 106.0 degrees East longitude. The range to the target site was 244.9 km (153.0 miles). At this distance the image scale is 49.0 cm/pixel (with 2 x 2 binning) so objects 147 cm across are resolved. The image shown here has been map-projected to 50 cm/pixel . The image was taken at a local Mars time of 06:20 PM and the scene is illuminated from the west with a solar incidence angle of 79 degrees, thus the sun was about 11 degrees above the horizon. At a solar longitude of 207.6 degrees, the season on Mars is Northern Autumn.

  8. Bright field microscopy as an alternative to whole cell fluorescence in automated analysis of macrophage images.

    Directory of Open Access Journals (Sweden)

    Jyrki Selinummi

    Full Text Available BACKGROUND: Fluorescence microscopy is the standard tool for detection and analysis of cellular phenomena. This technique, however, has a number of drawbacks such as the limited number of available fluorescent channels in microscopes, overlapping excitation and emission spectra of the stains, and phototoxicity. METHODOLOGY: We here present and validate a method to automatically detect cell population outlines directly from bright field images. By imaging samples with several focus levels forming a bright field -stack, and by measuring the intensity variations of this stack over the -dimension, we construct a new two dimensional projection image of increased contrast. With additional information for locations of each cell, such as stained nuclei, this bright field projection image can be used instead of whole cell fluorescence to locate borders of individual cells, separating touching cells, and enabling single cell analysis. Using the popular CellProfiler freeware cell image analysis software mainly targeted for fluorescence microscopy, we validate our method by automatically segmenting low contrast and rather complex shaped murine macrophage cells. SIGNIFICANCE: The proposed approach frees up a fluorescence channel, which can be used for subcellular studies. It also facilitates cell shape measurement in experiments where whole cell fluorescent staining is either not available, or is dependent on a particular experimental condition. We show that whole cell area detection results using our projected bright field images match closely to the standard approach where cell areas are localized using fluorescence, and conclude that the high contrast bright field projection image can directly replace one fluorescent channel in whole cell quantification. Matlab code for calculating the projections can be downloaded from the supplementary site: http://sites.google.com/site/brightfieldorstaining.

  9. The Bright SHARC Survey The Cluster Catalog

    CERN Document Server

    Romer, A K; Holden, B P; Ulmer, M P; Pildis, R A; Merrelli, A J; Adami, C; Burke, D J; Collins, C A; Metevier, A J; Kron, Richard G; Commons, K

    1999-01-01

    We present the Bright SHARC (Serendipitous High-Redshift Archival ROSAT Cluster) Survey, which is an objective search for serendipitously detected extended X-ray sources in 460 deep ROSAT PSPC pointings. The Bright SHARC Survey covers an area of 178.6 sq.deg and has yielded 374 extended sources. We discuss the X-ray data reduction, the candidate selection and present results from our on-going optical follow-up campaign. The optical follow-up concentrates on the brightest 94 of the 374 extended sources and is now 97% complete. We have identified thirty-seven clusters of galaxies, for which we present redshifts and luminosities. The clusters span a redshift range of 0.0696Bright SHARC clusters have not been listed in any previously ...

  10. Extreme Brightness Temperatures and Refractive Substructure in 3C273 with RadioAstron

    CERN Document Server

    Johnson, Michael D; Gwinn, Carl R; Gurvits, Leonid I; Narayan, Ramesh; Macquart, Jean-Pierre; Jauncey, David L; Voitsik, Peter A; Anderson, James M; Sokolovsky, Kirill V; Lisakov, Mikhail M

    2016-01-01

    Earth-space interferometry with RadioAstron provides the highest direct angular resolution ever achieved in astronomy at any wavelength. RadioAstron detections of the classic quasar 3C273 on interferometric baselines up to 171,000 km suggest brightness temperatures exceeding expected limits from the "inverse-Compton catastrophe" by two orders of magnitude. We show that at 18 cm, these estimates most probably arise from refractive substructure introduced by scattering in the interstellar medium. We use the scattering properties to estimate an intrinsic brightness temperature of 7*10^12 K, which is consistent with expected theoretical limits, but which is ~15 times lower than estimates that neglect substructure. At 6 cm, the substructure influences the measured values appreciably but gives an estimated brightness temperature that is comparable to models that do not account for the substructure. At 1.3 cm, the substructure does not affect the extremely high inferred brightness temperatures, in excess of 10^13 K....

  11. High Gain and High Directive of Antenna Arrays Utilizing Dielectric Layer on Bismuth Titanate Ceramics

    Directory of Open Access Journals (Sweden)

    F. H. Wee

    2012-01-01

    Full Text Available A high gain and high directive microstrip patch array antenna formed from dielectric layer stacked on bismuth titanate (BiT ceramics have been investigated, fabricated, and measured. The antennas are designed and constructed with a combination of two-, four-, and six-BiT elements in an array form application on microwave substrate. For gain and directivity enhancement, a layer of dielectric was stacked on the BiT antenna array. We measured the gain and directivity of BiT array antennas with and without the dielectric layer and found that the gain of BiT array antenna with the dielectric layer was enhanced by about 1.4 dBi of directivity and 1.3 dB of gain over the one without the dielectric layer at 2.3 GHz. The impedance bandwidth of the BiT array antenna both with and without the dielectric layer is about 500 MHz and 350 MHz, respectively, which is suitable for the application of the WiMAX 2.3 GHz system. The utilization of BiT ceramics that covers about 90% of antenna led to high radiation efficiency, and small-size antennas were produced. In order to validate the proposed design, theoretical and measured results are provided and discussed.

  12. Consecutive Bright Pulses in the Vela Pulsar

    CERN Document Server

    Palfreyman, Jim L; Dickey, John M; Young, Timothy G; Hotan, Claire E; 10.1088/2041-8205/735/1/L17

    2011-01-01

    We report on the discovery of consecutive bright radio pulses from the Vela pulsar, a new phenomenon that may lead to a greater understanding of the pulsar emission mechanism. This results from a total of 345 hr worth of observations of the Vela pulsar using the University of Tasmania's 26 m radio telescope to study the frequency and statistics of abnormally bright pulses and sub-pulses. The bright pulses show a tendency to appear consecutively. The observations found two groups of six consecutive bright pulses and many groups of two to five bright pulses in a row. The strong radio emission process that produces the six bright pulses lasts between 0.4 and 0.6 s. The numbers of bright pulses in sequence far exceed what would be expected if individual bright pulses were independent random events. Consecutive bright pulses must be generated by an emission process that is long lived relative to the rotation period of the neutron star.

  13. An in-house developed annular bright field detection system

    Science.gov (United States)

    Lari, Leonardo; Wright, Ian; Pingstone, Daniel; Steward, Jonathan; Gilks, Daniel; Lazarov, Vlado K.

    2014-06-01

    Annular bright field (ABF) detectors have been developed in the last few years allowing the direct imaging of low-Z atoms from oxygen down to hydrogen. These types of detectors are now available as standard attachments for the latest generation of top-end electron microscopes. However these systems cannot always be installed in previous generation microscopes. In this paper we report the preliminary results of an in-house implementation of a ABF detection system on a CEOS aberration corrected JEOL 2200FS STEM. This has been obtained by exploiting the standard BF detector coupled with a high vacuum compatible, X-ray tight and retractable shadowing mechanism. This results in the acquisition of near zero-angle scattered electrons with inner collection semi-angle from 2.0 mrad to 23 mrad and outer semi-angle in the range from 3.0 mrad to 35 mrad. The characteristics and performances of this ABF detection system are discussed.

  14. Bright Spots and Missed Opportunities: What Co-Teachers in One Midwestern High School Do to Support Access to the General Education Curriculum

    Science.gov (United States)

    Shankland, Rebecca K.

    2011-01-01

    In response to recent legislative changes including increased graduation requirements and changes in requirements for Highly Qualified status for secondary special education teachers, many schools have implemented co-teaching as a way to deliver special education services to students with high-incidence disabilities and to increase access to and…

  15. Visible Color and Photometry of Bright Materials on Vesta

    Science.gov (United States)

    Schroder, S. E.; Li, J. Y.; Mittlefehldt, D. W.; Pieters, C. M.; De Sanctis, M. C.; Hiesinger, H.; Blewett, D. T.; Russell, C. T.; Raymond, C. A.; Keller, H. U.

    2012-01-01

    The Dawn Framing Camera (FC) collected images of the surface of Vesta at a pixel scale of 70 m in the High Altitude Mapping Orbit (HAMO) phase through its clear and seven color filters spanning from 430 nm to 980 nm. The surface of Vesta displays a large diversity in its brightness and colors, evidently related to the diverse geology [1] and mineralogy [2]. Here we report a detailed investigation of the visible colors and photometric properties of the apparently bright materials on Vesta in order to study their origin. The global distribution and the spectroscopy of bright materials are discussed in companion papers [3, 4], and the synthesis results about the origin of Vestan bright materials are reported in [5].

  16. An observational correlation between stellar brightness variations and surface gravity

    CERN Document Server

    Bastien, Fabienne A; Basri, Gibor; Pepper, Joshua

    2013-01-01

    Surface gravity is one of a star's basic properties, but it is difficult to measure accurately, with typical uncertainties of 25-50 per cent if measured spectroscopically and 90-150 per cent photometrically. Asteroseismology measures gravity with an uncertainty of about two per cent but is restricted to relatively small samples of bright stars, most of which are giants. The availability of high-precision measurements of brightness variations for >150,000 stars provides an opportunity to investigate whether the variations can be used to determine surface gravities. The Fourier power of granulation on a star's surface correlates physically with surface gravity; if brightness variations on timescales of hours arise from granulation, then such variations should correlate with surface gravity. Here we report an analysis of archival data that reveals an observational correlation between surface gravity and the root-mean-square brightness variations on timescales of less than eight hours for stars with temperatures ...

  17. Metallic Photonic Bandgap Resonant Antennas with High Directivity and High Radiation Resistance

    Institute of Scientific and Technical Information of China (English)

    林青春; 符建; 何赛灵; 章坚武

    2002-01-01

    A metallic photonic bandgap (MPBG) resonant antenna is introduced, which has novel characteristics (such as high directivity and high radiation resistance for a certain range of frequencies) as compared to conventional MPBG antennas. The linear MPBG resonant antenna is formed by infinitely long metallic rods in vacuum. The numerical results for the radiation pattern and the radiation resistance are presented. By adjusting the struct ure of the MPBG resonant antenna and its working frequency, an optimal structure is achieved. The physical reasons for the novel characteristics of the MPBG resonant antenna are also explained.

  18. Brightness-equalized quantum dots

    Science.gov (United States)

    Lim, Sung Jun; Zahid, Mohammad U.; Le, Phuong; Ma, Liang; Entenberg, David; Harney, Allison S.; Condeelis, John; Smith, Andrew M.

    2015-10-01

    As molecular labels for cells and tissues, fluorescent probes have shaped our understanding of biological structures and processes. However, their capacity for quantitative analysis is limited because photon emission rates from multicolour fluorophores are dissimilar, unstable and often unpredictable, which obscures correlations between measured fluorescence and molecular concentration. Here we introduce a new class of light-emitting quantum dots with tunable and equalized fluorescence brightness across a broad range of colours. The key feature is independent tunability of emission wavelength, extinction coefficient and quantum yield through distinct structural domains in the nanocrystal. Precise tuning eliminates a 100-fold red-to-green brightness mismatch of size-tuned quantum dots at the ensemble and single-particle levels, which substantially improves quantitative imaging accuracy in biological tissue. We anticipate that these materials engineering principles will vastly expand the optical engineering landscape of fluorescent probes, facilitate quantitative multicolour imaging in living tissue and improve colour tuning in light-emitting devices.

  19. Global View of the Bright Material on Vesta

    Science.gov (United States)

    Zambon, F.; DeSanctis, C.; Schroeder, S.; Tosi, F.; Li, J.-Y.; Longobardo, A.; Ammannito, E.; Blewett, D. T.; Palomba, E.; Capaccioni, F.; Frigeri, A.; Capria, M. T.; Fonte, S.; Mittlefehldt, D. W.; Nathues, A.; Pieters, C.; Russell, C. T.; Raymond, C. A.

    2014-01-01

    At 525 km in mean diameter, Vesta is the second-most massive and one of the brightest asteroids of the main-belt. Here we give a global view of the bright material (BM) units on Vesta. We classified the BMs according to the normal visual albedo. The global albedo map of Vesta allows to be divided the surface into three principal types of terrains: bright regions, dark regions and intermediate regions. The distribution of bright regions is not uniform. The mid-southern latitudes contain the most bright areas, while the northern hemisphere is poor in bright regions. The analysis of the spectral parameters and the normal visual albedo show a dependence between albedo and the strength (depth) of ferrous iron absorption bands, strong bands correspond with high albedo units. Vesta's average albedo is 0.38, but there are bright material whose albedo can exceed 0.50. Only the E-Type asteroids have albedos comparable to those of the BMs on Vesta. The Dawn mission observed a large fraction of Vesta's surface at high spatial resolution, allowing a detailed study of the morphology and mineralogy of it. In particular, reflectance spectra provided by the Visible and InfraRed spectrometer (VIR), confirmed that Vesta's mineralogy is dominated by pyroxenes. All Vesta spectra show two strong absorption bands at approx 0.9 and 1.9 micron, typical of the pyroxenes and associated with the howardite, eucrite and diogenite (HED) meteorites.

  20. Design and realization of reflective current barrier for high-brightness LED chips%高亮度LED芯片的反射型电流阻挡层设计与实现

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    基于光学传输理论矩阵,设计制作SiO2和Ti3O5交替生长的分布式布拉格反射(DBR)结构作为LED芯片的电流阻挡层,并采用电感耦合等离子体(ICP)刻蚀技术在电流阻挡层处形成沟槽结构,以解决困扰LED器件效率提高的电流扩散及金属电极降低出光效率的问题。实验结果表明,采用这种结构的LED芯片能将亮度提高5%以上,而LED芯片的正向电压基本维持不变。这种反射型电流阻挡层结构能够很好地改善大尺寸LED芯片的电流扩散,有效地提高LED芯片的出光效率。%Based on optical transfer matrix theory,a distributed Bragg reflector(DBR) consisting of SiO2 and Ti3O5 is designed as the current barrier layer for high-brightness LED chips,and a trench structure is etched by inductively coupled plasma(ICP) technique at the current barrier.The problems that the current spreading restricts the improvement of the LED efficiency and the metal electrodes reduce light-extraction efficiency are solved by this way.The experiment results indicate that the brightness of the LED chip with this structure can be increased by 5%,while the chip voltage is essentially unchanged,which shows that the new structure can greatly ameliorate the current spreading and increase the extraction efficiency of LED chip.

  1. Highly reproducible SERS arrays directly written by inkjet printing

    Science.gov (United States)

    Yang, Qiang; Deng, Mengmeng; Li, Huizeng; Li, Mingzhu; Zhang, Cong; Shen, Weizhi; Li, Yanan; Guo, Dan; Song, Yanlin

    2014-12-01

    SERS arrays with uniform gold nanoparticle distribution were fabricated by direct-writing with an inkjet printing method. Quantitative analysis based on Raman detection was achieved with a small standard statistical deviation of less than 4% for the reproducibility and less than 5% for the long-term stability for 12 weeks.SERS arrays with uniform gold nanoparticle distribution were fabricated by direct-writing with an inkjet printing method. Quantitative analysis based on Raman detection was achieved with a small standard statistical deviation of less than 4% for the reproducibility and less than 5% for the long-term stability for 12 weeks. Electronic supplementary information (ESI) available: Additional information on the experimental details, gold nanoparticle characterization, and theoretical calculation for the diameters of contact area of droplets on substrates with different contact angles. See DOI: 10.1039/c4nr04656k

  2. Method and apparatus for high-efficiency direct contact condensation

    Science.gov (United States)

    Bharathan, Desikan; Parent, Yves; Hassani, A. Vahab

    1999-01-01

    A direct contact condenser having a downward vapor flow chamber and an upward vapor flow chamber, wherein each of the vapor flow chambers includes a plurality of cooling liquid supplying pipes and a vapor-liquid contact medium disposed thereunder to facilitate contact and direct heat exchange between the vapor and cooling liquid. The contact medium includes a plurality of sheets arranged to form vertical interleaved channels or passageways for the vapor and cooling liquid streams. The upward vapor flow chamber also includes a second set of cooling liquid supplying pipes disposed beneath the vapor-liquid contact medium which operate intermittently in response to a pressure differential within the upward vapor flow chamber. The condenser further includes separate wells for collecting condensate and cooling liquid from each of the vapor flow chambers. In alternate embodiments, the condenser includes a cross-current flow chamber and an upward flow chamber, a plurality of upward flow chambers, or a single upward flow chamber. The method of use of the direct contact condenser of this invention includes passing a vapor stream sequentially through the downward and upward vapor flow chambers, where the vapor is condensed as a result of heat exchange with the cooling liquid in the contact medium. The concentration of noncondensable gases in the resulting condensate-liquid mixtures can be minimized by controlling the partial pressure of the vapor, which depends in part upon the geometry of the vapor-liquid contact medium. In another aspect of this invention, the physical and chemical performance of a direct contact condenser can be predicted based on the vapor and coolant compositions, the condensation conditions. and the geometric properties of the contact medium.

  3. A very bright SAR arc: implications for extreme magnetosphere-ionosphere coupling

    Directory of Open Access Journals (Sweden)

    J. Baumgardner

    2008-01-01

    Full Text Available In contrast to the polar aurora visible during geomagnetic storms, stable auroral red (SAR arcs offer a sub-visual manifestation of direct magnetosphere-ionosphere (M-I coupling at midlatitudes. The SAR arc emission at 6300 Å is driven by field-aligned magnetospheric energy transport from ring current/plasmapause locations into the ionosphere-thermosphere system. The first SAR arc was observed at the dawn of the space age (1956, and the typical brightness levels and occurrence patterns obtained from subsequent decades of observations appear to be consistent with the downward heat conduction theory, i.e., heated ambient F-layer electrons excite oxygen atoms to produce a spectrally pure emission. On very rare occasions, a SAR arc has been reported to be at brightness levels visible to the naked eye. Here we report on the first case of a very bright SAR arc (~13 kilo-Rayleighs observed by four diagnostic systems that sampled various aspects of the sub-auroral domain near Millstone Hill, MA, on the night of 29 October 1991: an imaging spectrograph, an all-sky camera, an incoherent scatter radar (ISR, and a DMSP satellite. Simulations of emission using the ISR and DMSP data with the MSIS neutral atmosphere succeed in reproducing the brightness levels observed. This provides a robust confirmation of M-I coupling theory in its most extreme aeronomic form within the innermost magnetosphere (L~2 during a rare superstorm event. The unusually high brightness value appears to be due to the rare occurrence of the heating of dense ionospheric plasma just equatorward of the trough/plasmapause location, in contrast to the more typical heating of the less dense F-layer within the trough.

  4. The effects of spin-dependent interactions on polarisation of bright polariton solitons

    CERN Document Server

    Sich, M; Chana, J K; Skolnick, M S; Krizhanovskii, D N; Gorbach, A V; Hartley, R; Skryabin, D V; Gavrilov, S V; Cerda-Mendez, E A; Biermann, K; Hey, R; Santos, P V

    2013-01-01

    We report on the spin properties of bright polariton solitons supported by an external pump to compensate losses. We observe robust circularly polarised solitons when a circularly polarised pump is applied, a result attributed to phase synchronisation between nondegenerate TE and TM polarised polariton modes at high momenta. For the case of a linearly polarised pump either s+ or s- circularly polarised bright solitons can be switched on in a controlled way by a s+ or s- writing beam respectively. This feature arises directly from the widely differing interaction strengths between co- and cross-circularly polarised polaritons. In the case of orthogonally linearly polarised pump and writing beams, the soliton emission on average is found to be unpolarised, suggesting strong spatial evolution of the soliton polarisation, a conclusion supported by polarisation correlation measurements. The observed results are in agreement with theory, which predicts stable circularly polarised solitons and unstable linearly pola...

  5. Examining the Impact of a Highly Targeted State Administered Merit Aid Program on Brain Drain: Evidence from a Regression Discontinuity Analysis of Missouri's Bright Flight Program

    Science.gov (United States)

    Harrington, James R.; Muñoz, José; Curs, Bradley R.; Ehlert, Mark

    2016-01-01

    The adoption of state-funded merit-based aid programs has become increasingly popular among policy-makers, particularly in the southeastern part of the United States. One of the primary rationales of state-funded merit-based aid is to provide scholarships to the best and brightest students as a means to retain high quality human capital in the…

  6. Bright CuInS2/CdS nanocrystal phosphors for high-gain full-spectrum luminescent solar concentrators.

    Science.gov (United States)

    Knowles, Kathryn E; Kilburn, Troy B; Alzate, Dane G; McDowall, Stephen; Gamelin, Daniel R

    2015-06-04

    The performance of colloidal CuInS2/CdS nanocrystals as phosphors for full-spectrum luminescent solar concentrators has been examined. Their combination of large solar absorption, high photoluminescence quantum yields, and only moderate reabsorption produces the highest projected flux gains of any nanocrystal luminophore to date.

  7. Examining the Impact of a Highly Targeted State Administered Merit Aid Program on Brain Drain: Evidence from a Regression Discontinuity Analysis of Missouri's Bright Flight Program

    Science.gov (United States)

    Harrington, James R.; Muñoz, José; Curs, Bradley R.; Ehlert, Mark

    2016-01-01

    The adoption of state-funded merit-based aid programs has become increasingly popular among policy-makers, particularly in the southeastern part of the United States. One of the primary rationales of state-funded merit-based aid is to provide scholarships to the best and brightest students as a means to retain high quality human capital in the…

  8. Solidification microstructure of directionally solidified superalloy under high temperature gradient

    Institute of Scientific and Technical Information of China (English)

    2012-01-01

    The effect of solidification rate on the microstructure development of nickel-based superalloy under the temperature gradient of 500 K·cm-1 was studied. The results show that, with the increase of directional solidification rate from 50 to 800 μm·s-1, both the primary and the secondary dendrite arm spacings of the alloy decrease gradually, and the dendrite morphologies transform from coarse dendrite to superfine dendrite. The sizes of all precipitates in the superalloy decrease gradually. The morphology of ...

  9. Novel Materials for High Efficiency Direct Methanol Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Carson, Stephen; Mountz, David; He, Wensheng; Zhang, Tao

    2013-12-31

    Direct methanol fuel cell membranes were developed using blends of different polyelectrolytes with PVDF. The membranes showed complex relationships between polyelectrolyte chemistry, morphology, and processing. Although the PVDF grade was found to have little effect on the membrane permselectivity, it does impact membrane conductivity and methanol permeation values. Other factors, such as varying the polyelectrolyte polarity, using varying crosslinking agents, and adjusting the equivalent weight of the membranes impacted methanol permeation, permselectivity, and areal resistance. We now understand, within the scope of the project work completed, how these inter-related performance properties can be tailored to achieve a balance of performance.

  10. Powerful Activity in the Bright Ages. I. A Visible/IR Survey of High Redshift 3C Radio Galaxies and Quasars

    CERN Document Server

    Hilbert, Bryan; Kotyla, JohnPaul; Tremblay, Grant R; Stanghellini, Carlo; Sparks, William B; Baum, Stefi A; Capetti, Alessandro; Macchetto, F Duccio; Miley, George K; O'Dea, Christopher P; Perlman, Eric S; Quillen, Alice C

    2016-01-01

    We present new rest frame UV and visible observations of 22 high-redshift (1 < z < 2.5) 3C radio galaxies and QSOs obtained with the Hubble Space Telescope's (HST) Wide Field Camera 3 (WFC3) instrument. Using a custom data reduction strategy in order to assure the removal of cosmic rays, persistence signal, and other data artifacts, we have produced high-quality science-ready images of the targets and their local environments. We observe targets with regions of UV emission suggestive of active star formation. In addition, several targets exhibit highly distorted host galaxy morphologies in the rest frame visible images. Photometric analyses reveals that brighter QSOs tend to be generally redder than their dimmer counterparts. Using emission line fluxes from the literature, we estimate that emission line contamination is relatively small in the rest frame UV images for the QSOs. Using archival VLA data, we have also created radio map overlays for each of our targets, allowing for analysis of the optical ...

  11. Electro-optic Properties of 850 nm High-brightness Tapered Lasers%850nm高亮度锥形半导体激光器的光电特性

    Institute of Scientific and Technical Information of China (English)

    杨晔; 王超; 宁永强; 王立军; 刘云; 秦莉; 张金龙; 彭航宇; 王烨; 李再金; 胡黎明; 史晶晶

    2011-01-01

    采用激射波长为850 rm的AlGaInAs/AlGaAs梯度折射率波导分别限制增益量子阱结构的外延片,设计并制备了具有条形结构和锥形结构的半导体激光器.在输出功率同为1 W时,锥形激光器的发散角、光束传播因子和亮度分别为4°、2.8和9.9 MW·cm-2·sr-1,远好于条形激光器的6°、9.2和3.0 MW·cm-2·sr-1.当外加3 A的脉冲电流时,锥形激光器峰值功率达到1.40 W,斜率效率为0.58 W/A,电光转换效率为30%.实验结果表明,锥形激光器可以在保证大功率输出的前提下,具有更高的光束质量.%High-brightness tapered laser diode at 850 nm was fabricated based on the AlGalnAs/Al GaAs chip with graded-index waveguide separate confinement hetero-structure. The tapered laser has better performancethan the broad laser under the same condition. The lateral divergence angles of the tapered laser and the broad laser were 4° and 6° at the output power of 1 W, while the beam propagation factor M were 2. 8 and 9. 2, respectively. The slope efficiency of the tapered laser had a high value of 0. 58 W/A and the conversion efficiency reached 30% in the output power 1.40 W under the injection current of 3 A. The facts indicated the tapered laser would be an ideal choice for high brightness high power laser diodes.

  12. High Efficiency Direct Methane Solid Oxide Fuel Cell System Project

    Data.gov (United States)

    National Aeronautics and Space Administration — NASA has a defined need for energy dense and highly efficient energy storage and power delivery systems for future space missions. Compared to other fuel cell...

  13. Evolution of Bright Screening-photovoltaic Spatial Optical Solitons

    Institute of Scientific and Technical Information of China (English)

    LIU Jinsong

    2001-01-01

    A numerical analysis of the dynamical evolution of bright screening-photovoltaic (SP) spatial solitons in biased photovoltaic-photorefractive materials in the case of neglecting the material loss and the diffusion is presented. When an incident optical beam is a bright SP soliton, the beam propagates along a linear path with its shape kept unchanged. When the incident optical beam is slightly different from a bright SP soliton, the beam reshapes itself and tries to evolve into a bright SP soliton after a short distance. However, when the incident optical beam is significantly different from a SP bright soliton, the beam cannot evolve into a stable bright SP soliton, and tends to experience periodic compression and expansion. For a low-intensity input beam, the wave experiences a periodic process of compression first and then expansion during the initial part of the cycle. For a high-intensity input beam, however, the wave will initially diffract and then experiences compression during the cycle.

  14. Rapid microwave synthesis of N-doped carbon nanodots with high fluorescence brightness for cell imaging and sensitive detection of iron (III)

    Science.gov (United States)

    Zhang, Xianfeng; Lu, Jingbo; Zhou, Xiaoli; Guo, Chunyan; Wang, Chuanhu

    2017-02-01

    We rapidly prepared N-doped photoluminescent carbon nanodots (CNDs) with the one-step microwave irradiation method using diammonium hydrogen citrate as the carbon source. The as-prepared CNDs possessed quasispherical morphology and a high quantum yield of about 26.8%, which was higher than the CNDs obtained by most other microwave-assisted methods. Moreover, the luminescent CNDs could be efficiently uptaken by BGC-823 cells and CT26.WT cells, and exhibited low cytotoxicity and favorable biocompatibility, making them suitable candidates for cell imaging. In addition, the CNDs could be utilized for Fe3+ ions sensitive detection with a detection limit of 180 nM.

  15. High specific power, direct methanol fuel cell stack

    Science.gov (United States)

    Ramsey, John C.; Wilson, Mahlon S.

    2007-05-08

    The present invention is a fuel cell stack including at least one direct methanol fuel cell. A cathode manifold is used to convey ambient air to each fuel cell, and an anode manifold is used to convey liquid methanol fuel to each fuel cell. Tie-bolt penetrations and tie-bolts are spaced evenly around the perimeter to hold the fuel cell stack together. Each fuel cell uses two graphite-based plates. One plate includes a cathode active area that is defined by serpentine channels connecting the inlet manifold with an integral flow restrictor to the outlet manifold. The other plate includes an anode active area defined by serpentine channels connecting the inlet and outlet of the anode manifold. Located between the two plates is the fuel cell active region.

  16. Optically Levitated Targets as a Source for High Brightness X-rays and a Platform for Mass-Limited Laser-interaction Experiments

    Science.gov (United States)

    Giltrap, Samuel; Stuart, Nick; Robinson, Tim; Armstrong, Chris; Hicks, George; Eardley, Sam; Gumbrell, Ed; Smith, Roland

    2016-10-01

    Here we report on the development of an optical levitation based x-ray and proton source, motivated by the requirement for a debris free, high spatial resolution, and low EMP source for x-ray radiography and proton production. Research at Imperial College has led to the development of a feedback controlled optical levitation trap which is capable of holding both solid (Glass beads) and liquid (silicon based oil) micro-targets ( 3-10um). The optical levitation trap has been successfully fielded in a high-intensity laser interaction experiment at Imperial College London and at the Vulcan Petawatt Laser system at the Rutherford Appleton Laboratory (RAL). Here we report on the results from that RAL run including; an x-ray source size of 10-15um with very good spherical symmetry when compared to wire targets, secondly very low EMP signal from isolated levitated targets (9 times less RF signal than a comparable wire target). At Imperial College we were also able to record an x-ray energy spectrum which produced an electron temperature of 0.48KeV, and performed interferometry of a shock evolving into a blast wave off an optically levitated droplet which allowed us to infer the electron density within the shock front.

  17. HAT-P-56b: A bright highly inflated massive Hot Jupiter around An F star in K2.0 field

    Science.gov (United States)

    Huang, Xu; Bakos, Gaspar; Hartman, Joel

    2015-08-01

    We report the discovery of HAT-P-56b, a transiting high inflated hot-jupiter orbiting a F type star in the field 0 of the NASA K2 mission, by the HATNet survey. We combine ground-based photometric light curves with the highprecision photometry obervation by the K2 mission, as well as radial velocity to determine the physical properties of this system. HAT-P-56b has a mass around ~2.2 Mjunp, a radius of ~1.5 Rjup, and transits its host star with a period of 2.79d. The host star has a V band magnitude of 10.9, Mass of 1.29 Msun, and radius of 1.433 Rsun. The radius of HAT-P-56b is among one of the largest compare to planets with similar mass, making it an interesting target for following up atmospherical observations.

  18. High-Directivity Emissions with Flexible Beam Numbers and Beam Directions Using Gradient-Refractive-Index Fractal Metamaterial

    Science.gov (United States)

    Xu, He-Xiu; Wang, Guang-Ming; Tao, Zui; Cui, Tie Jun

    2014-01-01

    A three-dimensional (3D) highly-directive emission system is proposed to enable beam shaping and beam steering capabilities in wideband frequencies. It is composed of an omnidirectional source antenna and several 3D gradient-refractive-index (GRIN) lenses. To engineer a broadband impedance match, the design method for these 3D lenses is established under the scenario of free-space excitation by using a planar printed monopole. For realizations and demonstrations, a kind of GRIN metamaterial is proposed, which is constructed by non-uniform fractal geometries. Due to the non-resonant and deep-subwavelength features of the fractal elements, the resulting 3D GRIN metamaterial lenses have extra wide bandwidth (3 to 7.5 GHz), and are capable of manipulating electromagnetic wavefronts accurately, advancing the state of the art of available GRIN lenses. The proposal for the versatile highly-directive emissions has been confirmed by simulations and measurements, showing that not only the number of beams can be arbitrarily tailored but also the beam directions can be steerable. The proposal opens a new way to control broadband highly-directive emissions with pre-designed directions, promising great potentials in modern wireless communication systems. PMID:25034268

  19. Directly coupled slotted high-Tc dc SQUIDs

    NARCIS (Netherlands)

    Jansman, A.B.M.; Izquierdo, M.; Flokstra, J.; Rogalla, H.

    1999-01-01

    A flux quantization model gives estimates for the effective area and washer inductance of slotted high-Tc dc SQUIDs. The inductance prediction has not been verified yet. Here, the theoretical dependence of washer inductance and effective area for four slotted SQUID types on the London penetration de

  20. High mass star formation in the IRAS 17233-3606 region: a new nearby and bright hot core in the southern sky

    CERN Document Server

    Leurini, S; Thorwirth, S; Wyrowski, F; Schilke, P; Menten, K M; Guesten, R; Zapata, L

    2008-01-01

    We present molecular line observations of the massive star forming region IRAS 17233-3606 aimed at studying the molecular core associated with the source. The observations were made using the Atacama Pathfinder Experiment telescope in the CO (3-2) and HCO^+ (4-3) transitions, and in the CH_3OH (6_K-5_K), (7_K-6_K) and CH_3CN (16_K-15_K) bands. For the CO(3-2) and HCO^+ (4-3) transitions, we obtained maps with a size of 70''\\times 70''. The typical angular resolution of the data is ~18''. Our observations reveal an exceptionally rich molecular spectrum, a signpost of hot core activity. Comparisons with two other prominent southern hot cores were made through observations in the same frequency setups. We also detected a bipolar outflow in CO (3-2) and HCO^+ (4-3) lines. Modelling reveals a hot core of size ~3'' and a temperature of 150 K in the IRAS17233-3606 region. The parameters of the molecular outflow are derived through the analysis of the CO (3-2) emission, and are typical of outflows driven by high-mass...

  1. Bright and gap solitons in membrane-type acoustic metamaterials

    Science.gov (United States)

    Zhang, Jiangyi; Romero-García, Vicente; Theocharis, Georgios; Richoux, Olivier; Achilleos, Vassos; Frantzeskakis, Dimitrios J.

    2017-08-01

    We study analytically and numerically envelope solitons (bright and gap solitons) in a one-dimensional, nonlinear acoustic metamaterial, composed of an air-filled waveguide periodically loaded by clamped elastic plates. Based on the transmission line approach, we derive a nonlinear dynamical lattice model which, in the continuum approximation, leads to a nonlinear, dispersive, and dissipative wave equation. Applying the multiple scales perturbation method, we derive an effective lossy nonlinear Schrödinger equation and obtain analytical expressions for bright and gap solitons. We also perform direct numerical simulations to study the dissipation-induced dynamics of the bright and gap solitons. Numerical and analytical results, relying on the analytical approximations and perturbation theory for solions, are found to be in good agreement.

  2. High performance coronagraphy for direct imaging of exoplanets

    Directory of Open Access Journals (Sweden)

    Guyon O.

    2011-07-01

    Full Text Available Coronagraphy has recently been an extremely active field of research, with several high performance concepts proposed, and several new coronagraphs tested in laboratories and telescopes. Coronagraph concepts can be grouped in a few broad categories: Lyot-type coronagraphs, pupil apodization and nulling interferometers. Among existing coronagraph concepts, several approach the fundamental performance limit imposed by the physical nature of light. To achieve their full potential, coronagraphs require exquisite wavefront control and calibration. This has been, and still is, the main bottleneck for the scientifically productive use of coronagraphs on ground-based telescopes. New and promising wavefront sensing techniques suitable for high contrast imaging have however been developed in the last few years and are started to be realized in laboratories. I will review some of these enabling technologies, and show that coronagraphs are now ready for “prime time” on existing and future telescopes.

  3. High directivity optical antenna substrates for surface enhanced Raman scattering.

    Science.gov (United States)

    Wang, Dongxing; Zhu, Wenqi; Chu, Yizhuo; Crozier, Kenneth B

    2012-08-22

    A two-dimensional array of gold optical antennas integrated with a one-dimensional array of gold strips and mirrors is introduced and fabricated. The experimental results show that this design achieves average surface-enhanced Raman scattering (SERS) enhancement factors as high as 1.2 × 10(10) , which is more than two orders of magnitude larger than optical antennas without the gold strips and gold mirror.

  4. High-Speed Optical Local Access Network System Using Bi-Directional Polarization Multiplexing

    Institute of Scientific and Technical Information of China (English)

    Mitsuru Miyauchi; Yanjun Sun

    2003-01-01

    A high-speed and economical optical local access network system is proposed where bi-directional polarization multiplexing is applied to a bi-directional transmission. Experimental results using a prototype system confirmlow optical loss and environmental stabilities.

  5. High-Speed Optical Local Access Network System Using Bi-Directional Polarization Multiplexing

    Institute of Scientific and Technical Information of China (English)

    Mitsuru; Miyauchi; Yanjun; Sun

    2003-01-01

    A high-speed and economical optical local access network system is proposed where bi-directional polarization multiplexing is applied to a bi-directional transmission. Experimental results using a prototype system confirm low optical loss and environmental stabilities.

  6. High-cadence spectroscopy of M dwarfs - I. Analysis of systematic effects in HARPS-N line profile measurements on the bright binary GJ 725A+B

    Science.gov (United States)

    Berdiñas, Z. M.; Amado, P. J.; Anglada-Escudé, G.; Rodríguez-López, C.; Barnes, J.

    2016-07-01

    Understanding the sources of instrumental systematic noise is a must to improve the design of future spectrographs. In this study, we alternated observations of the well-suited pair of M-stars GJ 725A+B to delve into the sub-night High Accuracy Radial Velocity Planet Searcher for the Northern hemisphere (HARPS-N) response. Besides the possible presence of a low-mass planet orbiting GJ 725B, our observations reveal changes in the spectral energy distribution (SED) correlated with measurements of the width of the instrumental line profile and, to a lower degree, with the Doppler measurements. To study the origin of these effects, we searched for correlations among several quantities defined and measured on the spectra and on the acquisition images. We find that the changes in apparent SED are very likely related to flux losses at the fibre input. Further tests indicate that such flux losses do not seriously affect the shape of the instrumental point spread function of HARPS-N, but identify an inefficient fitting of the continuum as the most likely source of the systematic variability observed in the full width at half-maximum. This index, accounting for the HARPS-N cross-correlation profiles width, is often used to decorrelate Doppler time series. We show that the Doppler measurement obtained by a parametric least-squares fitting of the spectrum accounting for continuum variability is insensitive to changes in the slope of the SED, suggesting that forward modelling techniques to measure moments of the line profile are the optimal way to achieve higher accuracy. Remaining residual variability at ˜1 m s-1 suggests that for M-stars Doppler surveys the current noise floor still has an instrumental origin.

  7. Sky brightness and twilight measurements at Jogyakarta city, Indonesia

    Science.gov (United States)

    Herdiwijaya, Dhani

    2016-11-01

    The sky brightness measurements were performed using a portable photometer. A pocket-sized and low-cost photometer has 20 degree area measurement, and spectral ranges between 320-720 nm with output directly in magnitudes per arc second square (mass) unit. The sky brightness with 3 seconds temporal resolutions was recorded at Jogyakarta city (110° 25’ E; 70° 52’ S; elevation 100 m) within 136 days in years from 2014 to 2016. The darkest night could reach 22.61 mpass only in several seconds, with mean value 18.8±0.7 mpass and temperature variation 23.1±1.2 C. The difference of mean sky brightness between before and after midnight was about -0.76 mpass or 2.0 times brighter. Moreover, the sky brightness and temperature fluctuations were more stable in after midnight than in before midnight. It is suggested that city light pollution affects those variations, and subsequently duration of twilight. By comparing twilight brightness for several places, we also suggest a 17° solar dip or about 66 minutes before sunrise for new time of Fajr prayer.

  8. Dark-bright soliton interactions beyond the integrable limit

    Science.gov (United States)

    Katsimiga, G. C.; Stockhofe, J.; Kevrekidis, P. G.; Schmelcher, P.

    2017-01-01

    In this work we present a systematic theoretical analysis regarding dark-bright solitons and their interactions, motivated by recent advances in atomic two-component repulsively interacting Bose-Einstein condensates. In particular, we study analytically via a two-soliton ansatz adopted within a variational formulation the interaction between two dark-bright solitons in a homogeneous environment beyond the integrable regime, by considering general inter- and intra-atomic interaction coefficients. We retrieve the possibility of a fixed point in the case where the bright solitons are out of phase. As the intercomponent interaction is increased, we also identify an exponential instability of the two-soliton state, associated with a subcritical pitchfork bifurcation. The latter gives rise to an asymmetric partition of the bright soliton mass and dynamically leads to spontaneous splitting of the bound pair. In the case of the in-phase bright solitons, we explain via parsing the analytical approximations and monitoring the direct dynamics why no such pair is identified, despite its prediction by the variational analysis.

  9. High performance Python for direct numerical simulations of turbulent flows

    Science.gov (United States)

    Mortensen, Mikael; Langtangen, Hans Petter

    2016-06-01

    Direct Numerical Simulations (DNS) of the Navier Stokes equations is an invaluable research tool in fluid dynamics. Still, there are few publicly available research codes and, due to the heavy number crunching implied, available codes are usually written in low-level languages such as C/C++ or Fortran. In this paper we describe a pure scientific Python pseudo-spectral DNS code that nearly matches the performance of C++ for thousands of processors and billions of unknowns. We also describe a version optimized through Cython, that is found to match the speed of C++. The solvers are written from scratch in Python, both the mesh, the MPI domain decomposition, and the temporal integrators. The solvers have been verified and benchmarked on the Shaheen supercomputer at the KAUST supercomputing laboratory, and we are able to show very good scaling up to several thousand cores. A very important part of the implementation is the mesh decomposition (we implement both slab and pencil decompositions) and 3D parallel Fast Fourier Transforms (FFT). The mesh decomposition and FFT routines have been implemented in Python using serial FFT routines (either NumPy, pyFFTW or any other serial FFT module), NumPy array manipulations and with MPI communications handled by MPI for Python (mpi4py). We show how we are able to execute a 3D parallel FFT in Python for a slab mesh decomposition using 4 lines of compact Python code, for which the parallel performance on Shaheen is found to be slightly better than similar routines provided through the FFTW library. For a pencil mesh decomposition 7 lines of code is required to execute a transform.

  10. Coupling Bright and Dark Plasmonic Lattice Resonances

    CERN Document Server

    Rodriguez, S R K; Maes, B; Janssen, O T A; Vecchi, G; Rivas, J Gomez

    2011-01-01

    We demonstrate the coupling of bright and dark Surface Lattice Resonances (SLRs), which are collective Fano resonances in 2D plasmonic crystals. As a result of this coupling, a frequency stop-gap in the dispersion relation of SLRs is observed. The different field symmetries of the low and high frequency SLR bands lead to pronounced differences in their coupling to free space radiation. Standing waves of very narrow spectral width compared to localized surface plasmon resonances are formed at the high frequency band edge, while subradiant damping onsets at the low frequency band edge leading the resonance into darkness. We introduce a coupled oscillator analog to the plasmonic crystal, which serves to elucidate the physics of the coupled plasmonic resonances and to estimate very high quality factors (Q>700) for SLRs, which are the highest known for any 2D plasmonic crystal.

  11. Direct Observation of High Photoresponsivity in Pure Graphene Photodetectors

    Science.gov (United States)

    Liu, Yanping; Xia, Qinglin; He, Jun; Liu, Zongwen

    2017-02-01

    Ultrafast and broad spectral bandwidth photodetectors are desirable attributable to their unique bandstructures. Photodetectors based on graphene have great potential due to graphene's outstanding optical and electrical properties. However, the highest reported values of the photoresponsivity of pure graphene are less than 10 mA/W at room temperature, which significantly limits its potential applications. Here, we report a photoresponsivity of 32 A/W in pure monolayer graphene photodetectors, an improvement of over one order of magnitude for functional graphene nanostructures (devices can be attributed to the high sensitivity of graphene's resistivity to a local change of the electric field induced by photo-excited carriers generated in the light-doping substrate. This dramatically increases the feasibility of using graphene for the next generation of photodetectors.

  12. Internetwork chromospheric bright grains observed with IRIS

    CERN Document Server

    Martínez-Sykora, Juan; Carlsson, Mats; De Pontieu, Bart; Pereira, Tiago M D; Boerner, Paul; Hurlburt, Neal; Kleint, Lucia; Lemen, James; Tarbell, Ted D; Title, Alan; Wuelser, Jean-Pierre; Hansteen, Viggo H; Golub, Leon; McKillop, Sean; Reeves, Kathy K; Saar, Steven; Testa, Paola; Tian, Hui; Jaeggli, Sarah; Kankelborg, Charles

    2015-01-01

    The Interface Region Imaging Spectrograph (IRIS) reveals small-scale rapid brightenings in the form of bright grains all over coronal holes and the quiet sun. These bright grains are seen with the IRIS 1330 \\AA, 1400 \\AA\\ and 2796 \\AA\\ slit-jaw filters. We combine coordinated observations with IRIS and from the ground with the Swedish 1-m Solar Telescope (SST) which allows us to have chromospheric (Ca II 8542 \\AA, Ca II H 3968 \\AA, H\\alpha, and Mg II k 2796 \\AA), and transition region (C II 1334 \\AA, Si IV 1402) spectral imaging, and single-wavelength Stokes maps in Fe I 6302 \\AA at high spatial (0.33"), temporal and spectral resolution. We conclude that the IRIS slit-jaw grains are the counterpart of so-called acoustic grains, i.e., resulting from chromospheric acoustic waves in a non-magnetic environment. We compare slit-jaw images with spectra from the IRIS spectrograph. We conclude that the grain intensity in the 2796 \\AA\\ slit-jaw filter comes from both the Mg II k core and wings. The signal in the C II ...

  13. High-Precision Direct Mass Determination of Unstable Isotopes

    CERN Multimedia

    2002-01-01

    The extension of systematic high-precision measurements of the nuclear mass to nuclei far from the valley of $\\beta$ stability is of great interest in nuclear physics and astrophysics. The mass, or binding energy, is a fundamental gross property and a key input parameter for nuclear matter calculations. It is also a sensitive probe for collective and single-particle effects in nuclear structure. \\\\ \\\\ For such purposes, nuclear masses need to be known to an accuracy of about 10$^{-7}$ (i.e. $\\Delta$M~$\\leq$~10~keV for A~=~100). To resolve a particular mass from its nuclear isomers and isobars, resolving power of 10$^6$ are often required. To achieve this, the ions delivered by the on-line mass separator ISOLDE are confined in a Penning quadrupole trap. This trap is placed in the very homogeneous and stable magnetic field of a superconducting magnet. Here, the cyclotron frequency and hence the mass are determined. \\\\ \\\\ The first measurements using this new technique have been completed for a long chain of Cs ...

  14. Ultraviolet-Bright, High-Redshift ULIRGS

    CERN Document Server

    Colbert, J W; Francis, P; Palunas, P; Williger, G M; Woodgate, B; Colbert, James W.; Teplitz, Harry; Francis, Paul; Palunas, Povilas; Williger, Gerard M.; Woodgate, Bruce

    2006-01-01

    We present Spitzer Space Telescope observations of the z=2.38 lya-emitter over-density associated with galaxy cluster J2143-4423, the largest known structure (110 Mpc) above z=2. We imaged 22 of the 37 known lya-emitters within the filament-like structure, using the MIPS 24um band. We detected 6 of the lya-emitters, including 3 of the 4 clouds of extended (>50 kpc) lyman alpha emission, also known as Lya Blobs. Conversion from rest-wavelength 7um to total far-infrared luminosity using locally derived correlations suggests all the detected sources are in the class of ULIRGs, with some reaching Hyper-LIRG energies. Lya blobs frequently show evidence for interaction, either in HST imaging, or the proximity of multiple MIPS sources within the Lya cloud. This connection suggests that interaction or even mergers may be related to the production of Lya blobs. A connection to mergers does not in itself help explain the origin of the Lya blobs, as most of the suggested mechanisms for creating Lya blobs (starbursts, AG...

  15. LCD Projection Display System with High Brightness

    Institute of Scientific and Technical Information of China (English)

    2003-01-01

    A new compact XGA projection is designed with three 0.99" liquid crystal panels. By using 275W UHP lamp, above 3000 ANSI lumens could be achieved with the uniformity of 85%. The color temperature is 6742K.

  16. High brightness near-ultraviolet resonant LEDs

    Energy Technology Data Exchange (ETDEWEB)

    Corbett, B.; Roycroft, B.; Maaskant, P.; Akhter, M. [Tyndall National Institute, Lee Maltings, Prospect Row, Cork (Ireland); Zhu, D.; McAleese, C.; Kappers, M.J.; Humphreys, C.J. [Department of Materials Science and Metallurgy, University of Cambridge, Cambridge, CB2 3QZ (United Kingdom)

    2008-07-01

    Planar near-ultraviolet 385 nm emitting resonant LEDs containing three quantum wells have been investigated as a function of the separation between the wells and a reflective and injecting metal mirror. The output power and far-field extracted through the substrate of the LEDs depend on the precise positions of the wells with each well having a significant individual influence on these properties. A doubling of the output power is obtained when the wells are located around the antinode position of the standing wave while narrower far-fields are obtained with other placement of the wells. A power of 0.4 mW into a numerical aperture of 0.5 is obtained for a current of 30 mA into a 50 {mu}m diameter contact. Calibration of the growth rate along with accurate knowledge of the material properties of the semiconductor and metal mirrors is required for controlled and enhanced emission from planar UV LEDs. (copyright 2008 WILEY-VCH Verlag GmbH and Co. KGaA, Weinheim) (orig.)

  17. A racetrack microtron with high brightness beams

    Science.gov (United States)

    Shvedunov, V. I.; Barday, R. A.; Frolov, D. A.; Gorbachev, V. P.; Gribov, I. V.; Knapp, E. A.; Novikov, G. A.; Pakhomov, N. I.; Shvedunov, I. V.; Skachkov, V. S.; Sobenin, N. P.; Trower, W. P.; Tyurin, S. A.; Vetrov, A. A.; Yailijan, V. R.; Zayarny, D. A.

    2004-10-01

    Here we describe a racetrack microtron that provides electron beams at 12 energies from 4.85 to 34.2 MeV with ˜150 pC/bunch in ˜5 ps bunches having ˜10 mm mrad normalized transverse emittance. Our compact, inexpensive accelerator in addition to its external electron beams can generate electromagnetic radiation from ˜3 mm to ˜0.3 nm by a variety of mechanisms.

  18. A racetrack microtron with high brightness beams

    Energy Technology Data Exchange (ETDEWEB)

    Shvedunov, V.I.; Barday, R.A.; Frolov, D.A.; Gorbachev, V.P.; Gribov, I.V.; Knapp, E.A.; Novikov, G.A.; Pakhomov, N.I.; Shvedunov, I.V.; Skachkov, V.S.; Sobenin, N.P.; Trower, W.P. E-mail: trower@naxs.net; Tyurin, S.A.; Vetrov, A.A.; Yailijan, V.R.; Zayarny, D.A

    2004-10-01

    Here we describe a racetrack microtron that provides electron beams at 12 energies from 4.85 to 34.2 MeV with {approx}150 pC/bunch in {approx}5 ps bunches having {approx}10 mm mrad normalized transverse emittance. Our compact, inexpensive accelerator in addition to its external electron beams can generate electromagnetic radiation from {approx}3 mm to {approx}0.3 nm by a variety of mechanisms.

  19. Direct Utilization of Coal Syngas in High Temperature Fuel Cells

    Energy Technology Data Exchange (ETDEWEB)

    Celik, Ismail B. [West Virginia University, Morgantown, WV (United States)

    2014-10-30

    This EPSCoR project had two primary goals: (i) to build infrastructure and work force at WVU to support long-term research in the area of fuel cells and related sciences; (ii) study effects of various impurities found in coal-syngas on performance of Solid Oxide Fuel Cells (SOFC). As detailed in this report the WVU research team has made significant accomplishments in both of these areas. What follows is a brief summary of these accomplishments: State-of-the-art test facilities and diagnostic tools have been built and put into use. These include cell manufacturing, half-cell and full-cell test benches, XPS, XRD, TEM, Raman, EDAX, SEM, EIS, and ESEM equipment, unique in-situ measurement techniques and test benches (Environmental EM, Transient Mass-Spectrometer-MS, and IR Optical Temperature measurements). In addition, computational capabilities have been developed culminating in a multi-scale multi-physics fuel cell simulation code, DREAM-SOFC, as well as a Beowulf cluster with 64 CPU units. We have trained 16 graduate students, 10 postdoctoral fellows, and recruited 4 new young faculty members who have actively participated in the EPSCoR project. All four of these faculty members have already been promoted to the tenured associate professor level. With the help of these faculty and students, we were able to secure 14 research awards/contracts amounting to a total of circa $5.0 Million external funding in closely related areas of research. Using the facilities mentioned above, the effects of PH3, HCl, Cl2, and H2S on cell performance have been studied in detail, mechanisms have been identified, and also remedies have been proposed and demonstrated in the laboratory. For example, it has been determined that PH3 reacts rapidly with Ni to from secondary compounds which may become softer or even melt at high temperature and then induce Ni migration to the surface of the cell changing the material and micro-structural properties of the cell drastically. It is found that

  20. High-Directivity Emissions with Flexible Beam Numbers and Beam Directions Using Gradient-Refractive-Index Fractal Metamaterial

    OpenAIRE

    2014-01-01

    A three-dimensional (3D) highly-directive emission system is proposed to enable beam shaping and beam steering capabilities in wideband frequencies. It is composed of an omnidirectional source antenna and several 3D gradient-refractive-index (GRIN) lenses. To engineer a broadband impedance match, the design method for these 3D lenses is established under the scenario of free-space excitation by using a planar printed monopole. For realizations and demonstrations, a kind of GRIN metamaterial i...

  1. The possible origin of facular brightness in the solar atmosphere

    Science.gov (United States)

    Kostik, R.; Khomenko, E.

    2016-05-01

    This paper studies the dependence of the Ca ii H line core brightness on the strength and inclination of the photospheric magnetic field, and on the parameters of convective and wave motions in a facular region at the center of the solar disc. We use three simultaneous data sets that were obtained at the German Vacuum Tower Telescope (Observatorio del Teide, Tenerife): (1) spectra of Ba ii 4554 Å line, registered with the instrument TESOS to measure the variations of intensity and velocity through the photosphere up to the temperature minimum; (2) spectropolarimetric data in Fe i 1.56 μm lines (registered with the instrument TIP II) to measure photospheric magnetic fields; (3) filtergrams in Ca ii H that give information about brightness fluctuations in the chromosphere. The results show that the Ca ii H brightness in the facula strongly depends on the power of waves with periods in the 5-min range, which propagate upwards, and also on the phase shift between velocity oscillations at the bottom photosphere and around the temperature minimum height that is measured from Ba ii line. The Ca ii H brightness is maximum at locations where the phase shift between temperature and velocity oscillations lies within 0°-100°. There is an indirect influence of convective motions on the Ca ii H brightness. The higher the amplitude of convective velocities is and the greater the height is where they change their direction of motion, the brighter the facula. In summary, our results lead to conclusions that facular regions appear bright not only because of the Wilson depression in magnetic structures, but also owing to real heating.

  2. Aftereffect of Adaptation to Illusory Brightness

    Directory of Open Access Journals (Sweden)

    Xinguang Cao

    2011-05-01

    Full Text Available Several figures are known to induce illusory brightness. We tested whether adaptation to illusory brightness produced an aftereffect in brightness. After viewing a gray square area having illusory brightness (e.g., due to brightness contrast or illusory contours for ten seconds, the illusion-inducing surround vanished. After three seconds, subjects reported whether the square area was seen as brighter than, darker than, or the same brightness as a control gray square area. The luminance of the tested square area was physically unchanged. The results show that when the black surround inducing brightness contrast suddenly became gray (i.e., vanished, the center gray square tended to look darker than a control gray square. Similarly, after viewing a subjective square consisting of black-line terminations, the square area tended to look darker than the control even though the afterimage of the lines could not be seen. These results indicate that induced or illusory brightness causes an aftereffect in brightness regardless of the appearance of negative afterimages of the illusion-inducing components.

  3. Night Sky Brightness at San Pedro Martir Observatory

    Science.gov (United States)

    Plauchu-Frayn, I.; Richer, M. G.; Colorado, E.; Herrera, J.; Córdova, A.; Ceseña, U.; Ávila, F.

    2017-03-01

    We present optical UBVRI zenith night sky brightness measurements collected on 18 nights during 2013 to 2016 and SQM measurements obtained daily over 20 months during 2014 to 2016 at the Observatorio Astronómico Nacional on the Sierra San Pedro Mártir (OAN-SPM) in México. The UBVRI data is based upon CCD images obtained with the 0.84 m and 2.12 m telescopes, while the SQM data is obtained with a high-sensitivity, low-cost photometer. The typical moonless night sky brightness at zenith averaged over the whole period is U = 22.68, B = 23.10, V = 21.84, R = 21.04, I = 19.36, and SQM = 21.88 {mag} {{arcsec}}-2, once corrected for zodiacal light. We find no seasonal variation of the night sky brightness measured with the SQM. The typical night sky brightness values found at OAN-SPM are similar to those reported for other astronomical dark sites at a similar phase of the solar cycle. We find a trend of decreasing night sky brightness with decreasing solar activity during period of the observations. This trend implies that the sky has become darker by Δ U = 0.7, Δ B = 0.5, Δ V = 0.3, Δ R=0.5 mag arcsec‑2 since early 2014 due to the present solar cycle.

  4. Night sky brightness at San Pedro Martir Observatory

    CERN Document Server

    Plauchu-Frayn, I; Colorado, E; Herrera, J; Cordova, A; Cesena, U; Avila, F

    2016-01-01

    We present optical UBVRI zenith night sky brightness measurements collected on eighteen nights during 2013--2016 and SQM measurements obtained daily over twenty months during 2014--2016 at the Observatorio Astronomico Nacional on the Sierra San Pedro Martir (OAN-SPM) in Mexico. The UBVRI data is based upon CCD images obtained with the 0.84m and 2.12m telescopes, while the SQM data is obtained with a high-sensitivity, low-cost photometer. The typical moonless night sky brightness at zenith averaged over the whole period is U = 22.68, B = 23.10, V = 21.84, R = 21.04, I = 19.36, and SQM = 21.88 mag/square arcsec, once corrected for zodiacal light. We find no seasonal variation of the night sky brightness measured with the SQM. The typical night sky brightness values found at OAN-SPM are similar to those reported for other astronomical dark sites at a similar phase of the solar cycle. We find a trend of decreasing night sky brightness with decreasing solar activity during period of the observations. This trend im...

  5. Construction of a high-efficiency multi-site-directed mutagenesis ...

    African Journals Online (AJOL)

    Construction of a high-efficiency multi-site-directed mutagenesis. ... applied to hexapeptide gene synthesis and recombinant enterokinase gene ... This method was beneficial to prepare high-quality multibase mutagenesis and also implied ...

  6. Relationships between brightness of nighttime lights and population density

    Science.gov (United States)

    Naizhuo, Z.

    2012-12-01

    Brightness of nighttime lights has been proven to be a good proxy for socioeconomic and demographic statistics. Moreover, the satellite nighttime lights data have been used to spatially disaggregate amounts of gross domestic product (GDP), fossil fuel carbon dioxide emission, and electric power consumption (Ghosh et al., 2010; Oda and Maksyutov, 2011; Zhao et al., 2012). Spatial disaggregations were performed in these previous studies based on assumed linear relationships between digital number (DN) value of pixels in the nighttime light images and socioeconomic data. However, reliability of the linear relationships was never tested due to lack of relative high-spatial-resolution (equal to or finer than 1 km × 1 km) statistical data. With the similar assumption that brightness linearly correlates to population, Bharti et al. (2011) used nighttime light data as a proxy for population density and then developed a model about seasonal fluctuations of measles in West Africa. The Oak Ridge National Laboratory used sub-national census population data and high spatial resolution remotely-sensed-images to produce LandScan population raster datasets. The LandScan population datasets have 1 km × 1 km spatial resolution which is consistent with the spatial resolution of the nighttime light images. Therefore, in this study I selected 2008 LandScan population data as baseline reference data and the contiguous United State as study area. Relationships between DN value of pixels in the 2008 Defense Meteorological Satellite Program's Operational Linescan System (DMSP-OLS) stable light image and population density were established. Results showed that an exponential function can more accurately reflect the relationship between luminosity and population density than a linear function. Additionally, a certain number of saturated pixels with DN value of 63 exist in urban core areas. If directly using the exponential function to estimate the population density for the whole brightly

  7. The Solar Energy Road Lamp Using High Brightness LED Based on the Maximum Power Point Tracking%基于最大功率点跟踪策略的LED太阳能路灯照明系统

    Institute of Scientific and Technical Information of China (English)

    汪勇; 张金明

    2013-01-01

    On the basis of the research for the model of solar batteries'circuit, and in views of shortcomings that the diode prevents current backflow which makes the output power of the system decrease in the solar energy road lamp system , a mixed analog-digital maximum power point tracking(MPPT)strategy is proposed in this paper.And according to the requirements of such strategy and solid-state light source LED driver circuit, a high brightness LED solar street lighting system is designed .Exoperiments show that such sys-tem has a stable, reliable and excellent performance .Moreover, the utilization of solar energy is increased about 20%.The system has high practical value.%  在太阳能电池电路模型的基础上,针对传统太阳能路灯系统中防电流倒灌二极管使系统输出功率下降的问题,提出了一种数模混合型最大功率点跟踪(MPPT)策略,并根据该策略和固态光源LED驱动电路的要求,设计了一个高亮度LED太阳能路灯照明系统。实验结果表明,该系统工作稳定可靠,性能优良,可提高太阳能利用率20%左右,具有较高的实用价值。

  8. The Spectroscopic Properties of Bright Extragalactic Planetary Nebulae

    CERN Document Server

    Richer, M G

    2006-01-01

    The properties of bright extragalactic planetary nebulae are reviewed based upon the results of low and high resolution spectroscopy. It is argued that bright extragalactic planetary nebulae from galaxies (or subsystems) with and without star formation have different distributions of central star temperature and ionization structure. As regards the chemical compositions, oxygen and neon are generally found to be unchanged as a result of the evolution of the stellar progenitors. Nitrogen enrichment may occur as a result of the evolution of the progenitors of bright planetary nebulae in all stellar populations, though this enrichment may be (more) random in old stellar populations. Helium abundances appear to be influenced by the chemical evolution of the host galaxy, with planetary nebulae in dwarf spheroidals having systematically elevated abundances. Neither the age nor the metallicity of the progenitor stellar population has a strong effect upon the kinematics observed for nebular shells. Both the range of ...

  9. The brightness variations of Comet Halley at large heliocentric distances

    Science.gov (United States)

    Flammer, K. R.; Jackson, B.; Houpis, H. L. F.; Mendis, D. A.

    1986-01-01

    The reasons for the intrinsic brightness variations of up to 500 percent on time scales as short as a few hours detected by Sekanina (1984) in Comet Halley between October 1982 and February 1984 are discussed. It is shown that solar wind-modulated electrostatic dust blowoff from the night side of the comet is consistent with the observed brightness variations. The variations coincide with the encounter of high-speed streams with the comet. The stream's propagation time to the comet and the sun's rotation during this transit were used to locate the stream origin on the coronal surface, and the results are shown.

  10. Hybrid quantum repeater using bright coherent light.

    Science.gov (United States)

    van Loock, P; Ladd, T D; Sanaka, K; Yamaguchi, F; Nemoto, Kae; Munro, W J; Yamamoto, Y

    2006-06-23

    We describe a quantum repeater protocol for long-distance quantum communication. In this scheme, entanglement is created between qubits at intermediate stations of the channel by using a weak dispersive light-matter interaction and distributing the outgoing bright coherent-light pulses among the stations. Noisy entangled pairs of electronic spin are then prepared with high success probability via homodyne detection and postselection. The local gates for entanglement purification and swapping are deterministic and measurement-free, based upon the same coherent-light resources and weak interactions as for the initial entanglement distribution. Finally, the entanglement is stored in a nuclear-spin-based quantum memory. With our system, qubit-communication rates approaching 100 Hz over 1280 km with fidelities near 99% are possible for reasonable local gate errors.

  11. The influence of galaxy surface brightness on the mass-metallicity relation

    CERN Document Server

    Wu, Po-Feng; Tully, R Brent; Neill, J D

    2015-01-01

    We study the effect of surface brightness on the mass-metallicity relation using nearby galaxies whose gas content and metallicity profiles are available. Previous studies using fiber spectra indicated that lower surface brightness galaxies have systematically lower metallicity for their stellar mass, but the results were uncertain because of aperture effect. With stellar masses and surface brightnesses measured at WISE W1 and W2 bands, we re-investigate the surface brightness dependence with spatially-resolved metallicity profiles and find the similar result. We further demonstrate that the systematical difference cannot be explained by the gas content of galaxies. For two galaxies with similar stellar and gas masses, the one with lower surface brightness tends to have lower metallicity. Using chemical evolution models, we investigate the inflow and outflow properties of galaxies of different masses and surface brightnesses. We find that, on average, high mass galaxies have lower inflow and outflow rates rel...

  12. QUIET-SUN NETWORK BRIGHT POINT PHENOMENA WITH SIGMOIDAL SIGNATURES

    Energy Technology Data Exchange (ETDEWEB)

    Chesny, D. L.; Oluseyi, H. M. [Department of Physics and Space Sciences, Florida Institute of Technology, Melbourne, FL 32901 (United States); Orange, N. B. [OrangeWave Innovative Science, LLC, Moncks Corner, SC 29461 (United States); Champey, P. R. [Department of Optical Science and Engineering, University of Alabama in Huntsville, Huntsville, AL 35899 (United States)

    2015-12-01

    Ubiquitous solar atmospheric coronal and transition region bright points (BPs) are compact features overlying strong concentrations of magnetic flux. Here, we utilize high-cadence observations from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory to provide the first observations of extreme ultraviolet quiet-Sun (QS) network BP activity associated with sigmoidal structuring. To our knowledge, this previously unresolved fine structure has never been associated with such small-scale QS events. This QS event precedes a bi-directional jet in a compact, low-energy, and low-temperature environment, where evidence is found in support of the typical fan-spine magnetic field topology. As in active regions and micro-sigmoids, the sigmoidal arcade is likely formed via tether-cutting reconnection and precedes peak intensity enhancements and eruptive activity. Our QS BP sigmoid provides a new class of small-scale structuring exhibiting self-organized criticality that highlights a multi-scaled self-similarity between large-scale, high-temperature coronal fields and the small-scale, lower-temperature QS network. Finally, our QS BP sigmoid elevates arguments for coronal heating contributions from cooler atmospheric layers, as this class of structure may provide evidence favoring mass, energy, and helicity injections into the heliosphere.

  13. Quiet-Sun Network Bright Point Phenomena with Sigmoidal Signatures

    Science.gov (United States)

    Chesny, D. L.; Oluseyi, H. M.; Orange, N. B.; Champey, P. R.

    2015-12-01

    Ubiquitous solar atmospheric coronal and transition region bright points (BPs) are compact features overlying strong concentrations of magnetic flux. Here, we utilize high-cadence observations from the Atmospheric Imaging Assembly on board the Solar Dynamics Observatory to provide the first observations of extreme ultraviolet quiet-Sun (QS) network BP activity associated with sigmoidal structuring. To our knowledge, this previously unresolved fine structure has never been associated with such small-scale QS events. This QS event precedes a bi-directional jet in a compact, low-energy, and low-temperature environment, where evidence is found in support of the typical fan-spine magnetic field topology. As in active regions and micro-sigmoids, the sigmoidal arcade is likely formed via tether-cutting reconnection and precedes peak intensity enhancements and eruptive activity. Our QS BP sigmoid provides a new class of small-scale structuring exhibiting self-organized criticality that highlights a multi-scaled self-similarity between large-scale, high-temperature coronal fields and the small-scale, lower-temperature QS network. Finally, our QS BP sigmoid elevates arguments for coronal heating contributions from cooler atmospheric layers, as this class of structure may provide evidence favoring mass, energy, and helicity injections into the heliosphere.

  14. Photometric indicators of visual night sky quality derived from all-sky brightness maps

    Science.gov (United States)

    Duriscoe, Dan M.

    2016-09-01

    Wide angle or fisheye cameras provide a high resolution record of artificial sky glow, which results from the scattering of escaped anthropogenic light by the atmosphere, over the sky vault in the moonless nocturnal environment. Analysis of this record yields important indicators of the extent and severity of light pollution. The following indicators were derived through numerical analysis of all-sky brightness maps: zenithal, average all-sky, median, brightest, and darkest sky brightness. In addition, horizontal and vertical illuminance, resulting from sky brightness were computed. A natural reference condition to which the anthropogenic component may be compared is proposed for each indicator, based upon an iterative analysis of a high resolution natural sky model. All-sky brightness data, calibrated in the V band by photometry of standard stars and converted to luminance, from 406 separate data sets were included in an exploratory analysis. Of these, six locations representing a wide range of severity of impact from artificial sky brightness were selected as examples and examined in detail. All-sky average brightness is the most unbiased indicator of impact to the environment, and is more sensitive and accurate in areas of slight to moderate light pollution impact than zenith brightness. Maximum vertical illuminance provides an excellent indicator of impacts to wilderness character, as does measures of the brightest portions of the sky. Zenith brightness, the workhorse of field campaigns, is compared to the other indicators and found to correlate well with horizontal illuminance, especially at relatively bright sites. The median sky brightness describes a brightness threshold for the upper half of the sky, of importance to telescopic optical astronomy. Numeric indicators, in concert with all-sky brightness maps, provide a complete assessment of visual sky quality at a site.

  15. Analysis of high brightness laser synchrotron source based on a novel super-cavity%基于一种新型超腔的高亮度激光同步辐射分析

    Institute of Scientific and Technical Information of China (English)

    孟现柱

    2011-01-01

    提出了一种由一对抛物面构成的超腔的技术方案,计算了超腔汇聚点处的总光子密度.利用康普顿散射理论对基于抛物面超腔的激光同步辐射及其光子产额进行了讨论和计算.结果表明:当超腔镜面的反射率等于99.99%时,在超腔碰撞点处的总光子数密度大约是初始激光束在碰撞点处光子数密度的5 000倍,对应康普顿垂直散射的光子产额大约是电子束与初始激光束在碰撞点处发生康普顿垂直散射时的5 000倍.%A technical scheme of super-cavity with two parabolic mirrors is presented.The total photon density at the collision point of parabolic super-cavity is computed.By using the Compton scattering theory,the high brightness laser synchrotron source based on the parabolic super-cavity,including photon yield are discussed and calculated.The results show that when the reflectivity of parabolic mirror is equal to 99.99%,the total photon density at the collision point after infinite reflection is about 5 000 times higher than the photon density of the input laser beam at the collision point,and the photon yield of corresponding Compton vertical scattering is about 5 000 times higher than the photon yield of Compton vertical scattering between electron beam and input laser beam at the collision point.

  16. Brightness and darkness as perceptual dimensions

    NARCIS (Netherlands)

    Vladusich, T.; Lucassen, M.P.; Cornelissen, F.W.

    2007-01-01

    A common-sense assumption concerning visual perception states that brightness and darkness cannot coexist at a given spatial location. One corollary of this assumption is that achromatic colors, or perceived grey shades, are contained in a one-dimensional (1-D) space varying from bright to dark. The

  17. Bright Star Astrometry with URAT

    CERN Document Server

    Zacharias, Norbert

    2015-01-01

    The U.S. Naval Observatory Robotic Astrometric Telescope (URAT) is observing the northern sky since April 2012 for an astrometric survey. Multiple overlaps per year are performed in a single bandpass (680$-$750 nm) using the "redlens" 20 cm aperture astrograph and a mosaic of large CCDs. Besides the regular, deep survey to magnitude 18.5, short exposures with an objective grating are taken to access stars as bright as 3rd magnitude. A brief overview of the program, observing and reductions is given. Positions on the 8 to 20 mas level are obtained of 66,202 Hipparcos stars at current epochs. These are compared to the Hipparcos Catalog to investigate its accuracy. About 20\\% of the observed Hipparcos stars are found to have inconsitent positions with the Hipparcos Catalog prediction on the 3 sigma level or over (about 75 mas or more discrepant position offsets). Some stars are now seen at an arcsec (or 25 sigma) off their Hipparcos Catalog predicted position.

  18. Brightness Alteration with Interweaving Contours

    Directory of Open Access Journals (Sweden)

    Sergio Roncato

    2012-12-01

    Full Text Available Chromatic induction is observed whenever the perceived colour of a target surface shifts towards the hue of a neighbouring surface. Some vivid manifestations may be seen in a white background where thin coloured lines have been drawn (assimilation or when lines of different colours are collinear (neon effect or adjacent (watercolour to each other. This study examines a particular colour induction that manifests in concomitance with an opposite effect of colour saturation (or anti-spread. The two phenomena can be observed when a repetitive pattern is drawn in which outline thin contours intercept wider contours or surfaces, colour spreading appear to fill the surface occupied by surfaces or thick lines whereas the background traversed by thin lines is seen as brighter or filled of a saturated white. These phenomena were first observed by Bozzi (1975 and Kanizsa (1979 in figural conditions that did not allow them to document their conjunction. Here we illustrate various manifestations of this twofold phenomenon and compare its effects with the known effects of brightness and colour induction. Some conjectures on the nature of these effects are discussed.

  19. Propagation direction reversal of ionization zones in the transition between high and low current magnetron sputtering

    Energy Technology Data Exchange (ETDEWEB)

    School of Materials Science and Engineering, State Key Lab for Materials Processing and Die & Mold Technology, Huazhong University of Science and Technology, Wuhan 430074, China; Department of Physics, University of California Berkeley, Berkeley, California 94720, USA; Lawrence Berkeley National Laboratory, 1 Cyclotron Road, Berkeley, California 94720, USA; Yang, Yuchen; Liu, Jason; Liu, Lin; Anders, André

    2014-12-11

    Past research has revealed the propagation of dense, asymmetric ionization zones in both high and low current magnetron discharges. Here we report about the direction reversal of ionization zone propagation as observed with fast cameras. At high currents, zones move in the E B direction with velocities of 103 to 104 m/s. However at lower currents, ionization zones are observed to move in the opposite, the -E B direction, with velocities ~;; 103 m/s. It is proposed that the direction reversal is associated with the local balance of ionization and supply of neutrals in the ionization zone.

  20. Galaxy selection and the surface brightness distribution

    CERN Document Server

    McGaugh, S S; Schombert, J M

    1995-01-01

    Optical surveys for galaxies are biased against the inclusion of low surface brightness (LSB) galaxies. Disney (1976) suggested that the constancy of disk central surface brightness noticed by Freeman (1970) was not a physical result, but instead was an artifact of sample selection. Since LSB galaxies do exist, the pertinent and still controversial issue is if these newly discovered galaxies constitute a significant percentage of the general galaxy population. In this paper, we address this issue by determining the space density of galaxies as a function of disk central surface brightness. Using the physically reasonable assumption (which is motivated by the data) that central surface brightness is independent of disk scale length, we arrive at a distribution which is roughly flat (\\ie approximately equal numbers of galaxies at each surface brightness) faintwards of the Freeman (1970) value. Brightwards of this, we find a sharp decline in the distribution which is analogous to the turn down in the luminosity ...

  1. Life-threatening motor vehicle crashes in bright sunlight

    Science.gov (United States)

    Redelmeier, Donald A.; Raza, Sheharyar

    2017-01-01

    Abstract Bright sunlight may create visual illusions that lead to driver error, including fallible distance judgment from aerial perspective. We tested whether the risk of a life-threatening motor vehicle crash was increased when driving in bright sunlight. This longitudinal, case-only, paired-comparison analysis evaluated patients hospitalized because of a motor vehicle crash between January 1, 1995 and December 31, 2014. The relative risk of a crash associated with bright sunlight was estimated by evaluating the prevailing weather at the time and place of the crash compared with the weather at the same hour and location on control days a week earlier and a week later. The majority of patients (n = 6962) were injured during daylight hours and bright sunlight was the most common weather condition at the time and place of the crash. The risk of a life-threatening crash was 16% higher during bright sunlight than normal weather (95% confidence interval: 9–24, P < 0.001). The increased risk was accentuated in the early afternoon, disappeared at night, extended to patients with different characteristics, involved crashes with diverse features, not apparent with cloudy weather, and contributed to about 5000 additional patient-days in hospital. The increased risk extended to patients with high crash severity as indicated by ambulance involvement, surgical procedures, length of hospital stay, intensive care unit admission, and patient mortality. The increased risk was not easily attributed to differences in alcohol consumption, driving distances, or anomalies of adverse weather. Bright sunlight is associated with an increased risk of a life-threatening motor vehicle crash. An awareness of this risk might inform driver education, trauma staffing, and safety warnings to prevent a life-threatening motor vehicle crash. Level of evidence: Epidemiologic Study, level III. PMID:28072708

  2. Effects of Bright Light Treatment on Psychomotor Speed in Athletes

    Directory of Open Access Journals (Sweden)

    Mikko Paavo Tulppo

    2014-05-01

    Full Text Available Purpose: A recent study suggests that transcranial brain targeted light treatment via ear canals may have physiological effects on brain function studied by functional magnetic resonance imaging (fMRI techniques in humans. We tested the hypothesis that bright light treatment could improve psychomotor speed in professional ice hockey players. Methods: Psychomotor speed tests with audio and visual warning signals were administered to a Finnish National Ice Hockey League team before and after 24 days of transcranial bright light or sham treatment. The treatments were given during seasonal darkness in the Oulu region (latitude 65 degrees north when the strain on the players was also very high (10 matches during 24 days. A daily 12-min dose of bright light or sham (n = 11 for both treatment was given every morning between 8–12 am at home with a transcranial bright light device. Mean reaction time and motor time were analyzed separately for both psychomotor tests. Analysis of variance for repeated measures adjusted for age was performed. Results: Time x group interaction for motor time with a visual warning signal was p = 0.024 after adjustment for age. In Bonferroni post-hoc analysis, motor time with a visual warning signal decreased in the bright light treatment group from 127 ± 43 to 94 ± 26 ms (p = 0.024 but did not change significantly in the sham group 121 ± 23 vs. 110 ± 32 ms (p = 0.308. Reaction time with a visual signal did not change in either group. Reaction or motor time with an audio warning signal did not change in either the treatment or sham group. Conclusion: Psychomotor speed, particularly motor time with a visual warning signal, improves after transcranial bright light treatment in professional ice-hockey players during the competition season in the dark time of the year.

  3. Testing for uniformity of Ultra-High Energy Cosmic Ray arrival directions

    CERN Document Server

    Ivanov, A A

    2016-01-01

    Arrival directions of ultra-high energy cosmic rays (UHECRs) exhibit mainly an isotropic distribution with some small deviations in particular energy bins. In this paper, the Yakutsk array data are tested for circular uniformity of arrival directions in right ascension using 2 methods appropriate for the energy ranges below and above $10^{18}$ eV. No statistically significant deviation from uniformity is found in the arrival directions of cosmic rays (CRs) detected within the observation period 1974--2000.

  4. Bright Sparks of Our Future!

    Science.gov (United States)

    Riordan, Naoimh

    2016-04-01

    My name is Naoimh Riordan and I am the Vice Principal of Rockboro Primary School in Cork City, South of Ireland. I am a full time class primary teacher and I teach 4th class, my students are aged between 9-10 years. My passion for education has developed over the years and grown towards STEM (Science, Technology, Engineering and Mathematics) subjects. I believe these subjects are the way forward for our future. My passion and beliefs are driven by the unique after school programme that I have developed. It is titled "Sparks" coming from the term Bright Sparks. "Sparks" is an after school programme with a difference where the STEM subjects are concentrated on through lessons such as Science, Veterinary Science Computer Animation /Coding, Eco engineering, Robotics, Magical Maths, Chess and Creative Writing. All these subjects are taught through activity based learning and are one-hour long each week for a ten-week term. "Sparks" is fully inclusive and non-selective which gives all students of any level of ability an opportunity to engage into these subjects. "Sparks" is open to all primary students in County Cork. The "Sparks" after school programme is taught by tutors from the different Universities and Colleges in Cork City. It works very well because the tutor brings their knowledge, skills and specialised equipment from their respective universities and in turn the tutor gains invaluable teaching practise, can trial a pilot programme in a chosen STEM subject and gain an insight into what works in the physical classroom.

  5. The dark and visible matter content of low surface brightness disc galaxies

    NARCIS (Netherlands)

    deBlok, WJG; McGaugh, SS

    1997-01-01

    We present mass models of a sample of 19 low surface brightness (LSB) galaxies and compare the properties of their constituent mass components with those of a sample of high surface brightness (HSB) galaxies. We find that LSB galaxies are dark matter dominated, Their halo parameters are only slightl

  6. In-Situ Analysis of Coarsening during Directional Solidification Experiments in High-Solute Aluminum Alloys

    NARCIS (Netherlands)

    Ruvalcaba, D.; Mathiesen, R.H.; Eskin, D.G.; Arnberg, L.; Katgerman, L.

    2009-01-01

    Coarsening within the mushy zone during continuous directional solidification experiments was studied on an Al-30 wt pct Cu alloy. High brilliance synchrotron X-radiation microscopy allowed images to be taken in-situ during solidification. Transient conditions were present during directional solidif

  7. Space Brightness Evaluation for a Daylit Room

    Directory of Open Access Journals (Sweden)

    Takashi Maruyama

    2011-05-01

    Full Text Available One of the most important problems for lighting design is how to reduce an electric energy. One way to solve this problem is use of daylight, but little is known how to perceive a brightness of a room illuminated by daylight come in through a window and artificial light. Although the horizontal illuminance increases because of daylight, we would not perceive the room as bright as brightness estimated by the illuminance. The purpose of this study is to measure the space brightness for daylit room and to propose a evaluation method. The experiment was conducted with a couple of miniature office rooms, standard room and test room. Test room has several types of windows and standard room has no window. Subject was asked to evaluate the brightness of the test room relative to the standard room with method of magnitude estimation. It was found that brightness of daylit room did not increase simply with horizontal illuminance. Subject perceived a daylit room darker than a room illuminated only by the artificial light even if horizontal illuminance of these room was same. The effect of daylight on space brightness would vary with the window size and intensity of daylight or artificial light.

  8. SKYMONITOR: A Global Network for Sky Brightness Measurements

    Science.gov (United States)

    Davis, Donald R.; Mckenna, D.; Pulvermacher, R.; Everett, M.

    2010-01-01

    We are implementing a global network to measure sky brightness at dark-sky critical sites with the goal of creating a multi-decade database. The heart of this project is the Night Sky Brightness Monitor (NSBM), an autonomous 2 channel photometer which measures night sky brightness in the visual wavelengths (Mckenna et al, AAS 2009). Sky brightness is measured every minute at two elevation angles typically zenith and 20 degrees to monitor brightness and transparency. The NSBM consists of two parts, a remote unit and a base station with an internet connection. Currently these devices use 2.4 Ghz transceivers with a range of 100 meters. The remote unit is battery powered with daytime recharging using a solar panel. Data received by the base unit is transmitted via email protocol to IDA offices in Tucson where it will be collected, archived and made available to the user community via a web interface. Two other versions of the NSBM are under development: one for radio sensitive areas using an optical fiber link and the second that reads data directly to a laptop for sites without internet access. NSBM units are currently undergoing field testing at two observatories. With support from the National Science Foundation, we will construct and install a total of 10 units at astronomical observatories. With additional funding, we will locate additional units at other sites such as National Parks, dark-sky preserves and other sites where dark sky preservation is crucial. We will present the current comparison with the National Park Service sky monitoring camera. We anticipate that the SKYMONITOR network will be functioning by the end of 2010.

  9. Bright Transients from Black Hole - Neutron Star Mergers

    CERN Document Server

    D'Orazio, Daniel J; Murray, Norman W; Price, Larry

    2016-01-01

    Direct detection of black hole-neutron star (BHNS) pairs is anticipated with the advent of aLIGO. Electromagnetic counterparts may be crucial for a confident gravitational-wave detection as well as for extraction of astronomical information. Yet BHNS star pairs are notoriously dark and so inaccessible to telescopes. Contrary to this expectation, a bright electromagnetic transient can occur in the final moments before merger as long as the neutron star is highly magnetized. The orbital motion of the neutron star magnet creates a Faraday flux and corresponding power available for luminosity. A spectrum of curvature radiation ramps up until the rapid injection of energy ignites a fireball, which would appear as an energetic blackbody peaking in the X-ray to gamma-rays for neutron star field strengths ranging from $10^{12}$G to $10^{16}$G respectively and a $10M_{\\odot}$ black hole. The fireball event may last from a few milliseconds to a few seconds depending on the NS magnetic field strength, and may be observa...

  10. Hi-C Observations of Penumbral Bright Dots

    Science.gov (United States)

    Alpert, S. E.; Tiwari, S. K.; Moore, R. L.; Savage, S. L.; Winebarger, A. R.

    2014-01-01

    We use high-quality data obtained by the High Resolution Coronal Imager (Hi-C) to examine bright dots (BDs) in a sunspot's penumbra. The sizes of these BDs are on the order of 1 arcsecond (1") and are therefore hard to identify using the Atmospheric Imaging Assembly's (AIA) 0.6" pixel(exp -1) resolution. These BD become readily apparent with Hi-C's 0.1" pixel(exp -1) resolution. Tian et al. (2014) found penumbral BDs in the transition region (TR) by using the Interface Region Imaging Spectrograph (IRIS). However, only a few of their dots could be associated with any enhanced brightness in AIA channels. In this work, we examine the characteristics of the penumbral BDs observed by Hi-C in a sunspot penumbra, including their sizes, lifetimes, speeds, and intensity. We also attempt to find any association of these BDs to the IRIS BDs. There are fewer Hi-C BDs in the penumbra than seen by IRIS, though different sunspots were studied. We use 193 Angstroms Hi-C data from July 11, 2012 which observed from approximately 18:52:00 UT- 18:56:00 UT and supplement it with data from AIA's 193 Angstrom passband to see the complete lifetime of the dots that were born before and/or lasted longer than Hi- C's 5-minute observation period. We use additional AIA passbands and compare the light curves of the BDs at different temperatures to test whether the Hi-C BDs are TR BDs. We find that most Hi-C BDs show clear movement, and of those that do, they move in a radial direction, toward or away from the sunspot umbra. Single BDs interact with other BDs, combining to fade away or brighten. The BDs that do not interact with other BDs tend to move less. Many of the properties of our BDs are similar to the extreme values of the IRIS BDs, e.g., they move slower on average and their sizes and lifetimes are on the higher end of the IRIS BDs. We infer that our penumbral BDs are the large-scale end of the distribution of BDs observed by IRIS.

  11. Integration of a High Sensitivity MEMS Directional Sound Sensor With Readout Electronics

    Science.gov (United States)

    2012-12-01

    ERİŞMİŞ, “ MEMS accelerometers and gyroscopes for inertial measurement units,” M.S. thesis, Middle East Technical University, Cankaya, Ankara, Turkey...HIGH SENSITIVITY MEMS DIRECTIONAL SOUND SENSOR WITH READOUT ELECTRONICS by John D. Roth December 2012 Thesis Advisor: Gamani Karunasiri...3. REPORT TYPE AND DATES COVERED Master’s Thesis 4. TITLE AND SUBTITLE Integration of a High Sensitivity MEMS Directional Sound Sensor with

  12. Bright Spots on Ceres and Implications for Subsurface Composition and Structure

    Science.gov (United States)

    Stein, Nathaniel; Ehlmann, Bethany; Ammannito, Eleonora; Palomba, Ernesto; De Sanctis, Maria Cristina; Jaumann, Ralf; Nathues, Andreas; Raymond, Carol; Hiesinger, Harald; Schenk, Paul M.; Longobardo, Andrea; Dawn Team

    2016-10-01

    Images from the Dawn spacecraft show anomalously bright spots dotting Ceres' surface. Here we perform global mapping with FC data and find the spots can be classified into three geologic settings: 1) large crater floors, 2) rims/walls of craters of all sizes, or 3) the unique surface feature Ahuna Mons. There are at least 300 bright spots in total, over 200 of which are located on crater rims and walls. We examine controls on (1) and (2) as a function of crater diameter (D) and depth (d).Floor bright spots occur only in D>15 km craters, and bright spots associated with the central pit and peak complex are restricted to D>30 km. 7 of 9 craters with d>4 km (D: 70-165 km) host floor bright spots, though 30 craters with D>75 km do not contain floor bright spots, thus indicating that diameter is a weaker control on bright spot occurrence than depth. Craters with bright spots have a high d/D for their size bin, and rim/wall bright spots in craters of all sizes occur preferentially in and around the largest craters. The chief control on crater depth is presumed to be age, with shallowing due to relaxation. Thus, data suggest that previously emplaced bright materials may be removed or obscured over time via relaxation-driven burial, impact-driven lateral mixing, sublimation, or space weathering. Analyses from Dawn's VIR instrument show that some large floor bright spots are comprised of materials enriched in carbonates and other salts [e.g., 1]. The presence of bright material in many deep craters is consistent with their formation via impact-induced subsurface processes, though formation via endogenous, heterogeneously distributed subsurface processes cannot be excluded [1, 2].Here we use the Ceres production function [3] to construct a simple model in which only large (D>75 km) craters form central bright spots. These materials are then modified by later impacts. Initial results indicate that the excavation of previously emplaced bright material could explain the current

  13. Bright boys the making of information technology

    CERN Document Server

    Green, Tom

    2010-01-01

    Everything has a beginning. None was more profound-and quite as unexpected-than Information Technology. Here for the first time is the untold story of how our new age came to be and the bright boys who made it happen. What began on the bare floor of an old laundry building eventually grew to rival in size the Manhattan Project. The unexpected consequence of that journey was huge---what we now know as Information Technology. For sixty years the bright boys have been totally anonymous while their achievements have become a way of life for all of us. "Bright Boys" brings them home. By 1950 they'd

  14. Multi-Directional Sprint Training Improves Change-Of-Direction Speed and Reactive Agility in Young Highly Trained Soccer Players

    Science.gov (United States)

    Born, Dennis-Peter; Zinner, Christoph; Düking, Peter; Sperlich, Billy

    2016-01-01

    The aim of this study was to evaluate the effect of a repeated sprint training with multi-directional change-of-direction (COD) movements (RSmulti) compared to repeated shuttle sprints (RSS) on variables related to COD speed and reactive agility. Nineteen highly-trained male U15 soccer players were assigned into two groups performing either RSmulti or RSS. For both groups, each training session involved 20 repeated 15 s sprints interspersed with 30 s recovery. With RSmulti the COD movements were randomized and performed in response to a visual stimulus, while the RSS involved predefined 180° COD movements. Before and following the six training sessions, performance in the Illinois agility test (IAT), COD speed in response to a visual stimulus, 20 m linear sprint time and vertical jumping height were assessed. Both groups improved their performance in the IAT (p sprint time (P=0.73, ES = 0.07; p = 0.14, ES = 0.28) or vertical jumping height (p = 0.46, ES = 0.11; p = 0.29, ES = 0.12) for the RSmulti and RSS, respectively. In conclusion, performance in the IAT improved with the RSmulti as well as RSS. With the RSmulti however, the COD movements are performed in response to a visual stimulus, which may result in specific adaptations that improve COD speed and reactive agility in young highly trained soccer players. Key points During soccer, the players perform repeated sprints involving multi-directional COD movements, while most of these turns and twists are not pre-planned but executed in response to an external stimulus, such as ball movement, several interacting opponents and changing game situations. Both groups improved performance in the IAT. With the RSmulti on the Speedcourt however, the COD movements are performed in response to a visual stimulus, which may result in specific adaptations that improve COD speed and reactive agility. The Speedcourt could serve as a valuable method to design and individualize specific conditioning drills for young highly

  15. Modular Zero Energy. BrightBuilt Home

    Energy Technology Data Exchange (ETDEWEB)

    Aldrich, Robb [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.; Butterfield, Karla [Consortium for Advanced Residential Buildings (CARB), Norwalk, CT (United States). Steven Winters Associates, Inc.

    2016-03-01

    Kaplan Thompson Architects (KTA) has specialized in sustainable, energy-efficient buildings, and they have designed several custom, zero-energy homes in New England. These zero-energy projects have generally been high-end, custom homes with budgets that could accommodate advanced energy systems. In an attempt to make zero energy homes more affordable and accessible to a larger demographic, KTA explored modular construction as way to provide high-quality homes at lower costs. In the mid-2013, KTA formalized this concept when they launched BrightBuilt Home (BBH). The BBH mission is to offer a line of architect-designed, high-performance homes that are priced to offer substantial savings off the lifetime cost of a typical home and can be delivered in less time. For the past two years, CARB has worked with BBH and Keiser Homes (the primary modular manufacturer for BBH) to discuss challenges related to wall systems, HVAC, and quality control. In Spring of 2014, CARB and BBH began looking in detail on a home to be built in Lincolnville, ME by Black Bros. Builders. This report details the solution package specified for this modular plan and the challenges that arose during the project.

  16. High-gain direct-drive inertial confinement fusion for the Laser Megajoule: recent progress

    Energy Technology Data Exchange (ETDEWEB)

    Canaud, B [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Garaude, F [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Ballereau, P [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Bourgade, J L [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Clique, C [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Dureau, D [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Houry, M [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Jaouen, S [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Jourdren, H [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Lecler, N [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Masse, L [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Masson, A [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Quach, R [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Piron, R [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Riz, D [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Vliet, J van der [CEA/DAM Ile-de-France, BP12, F-91680 Bruyeres-le-Chatel, Cedex (France); Temporal, M [Calle Grau, 685, Sucre (Bolivia); Delettrez, J A [Laboratory of Laser Energetics, University of Rochester, 250 East River Road, Rochester, NY 14623 (United States); McKenty, P W [Laboratory of Laser Energetics, University of Rochester, 250 East River Road, Rochester, NY 14623 (United States)

    2007-12-15

    Recent progress in high-gain direct-drive inertial confinement fusion with the laser Megajoule is reviewed. A new baseline direct-drive target design is presented which implodes with a two-cones irradiation pattern of indirect-drive beam configuration and zooming. Perturbation amplitudes and correlated growth rates of hydrodynamic instabilities in the compressed core of a directly driven inertial confinement fusion capsule are analyzed in planar and spherical geometries, with and without heat conduction, in the unsteady state regime of the deceleration. Shock propagation in heterogeneous media is addressed in the context of first shock. The neutron and photon emissions of high-gain direct-drive target are characterized. Numerical interpretations of directly driven homothetic cryogenic D{sub 2} target implosion experiments on the Omega facility are presented.

  17. Use of chiral cell shape to ensure highly directional swimming in trypanosomes.

    Science.gov (United States)

    Wheeler, Richard John

    2017-01-01

    Swimming cells typically move along a helical path or undergo longitudinal rotation as they swim, arising from chiral asymmetry in hydrodynamic drag or propulsion bending the swimming path into a helix. Helical paths are beneficial for some forms of chemotaxis, but why asymmetric shape is so prevalent when a symmetric shape would also allow highly directional swimming is unclear. Here, I analyse the swimming of the insect life cycle stages of two human parasites; Trypanosoma brucei and Leishmania mexicana. This showed quantitatively how chirality in T. brucei cell shape confers highly directional swimming. High speed videomicrographs showed that T. brucei, L. mexicana and a T. brucei RNAi morphology mutant have a range of shape asymmetries, from wild-type T. brucei (highly chiral) to L. mexicana (near-axial symmetry). The chiral cells underwent longitudinal rotation while swimming, with more rapid longitudinal rotation correlating with swimming path directionality. Simulation indicated hydrodynamic drag on the chiral cell shape caused rotation, and the predicted geometry of the resulting swimming path matched the directionality of the observed swimming paths. This simulation of swimming path geometry showed that highly chiral cell shape is a robust mechanism through which microscale swimmers can achieve highly directional swimming at low Reynolds number. It is insensitive to random variation in shape or propulsion (biological noise). Highly symmetric cell shape can give highly directional swimming but is at risk of giving futile circular swimming paths in the presence of biological noise. This suggests the chiral T. brucei cell shape (associated with the lateral attachment of the flagellum) may be an adaptation associated with the bloodstream-inhabiting lifestyle of this parasite for robust highly directional swimming. It also provides a plausible general explanation for why swimming cells tend to have strong asymmetries in cell shape or propulsion.

  18. Copper bromide vapor brightness amplifiers with 100 kHz pulse repetition frequency

    Science.gov (United States)

    Trigub, M. V.; Evtushenko, G. S.; Torgaev, S. N.; Shiyanov, D. V.; Evtushenko, T. G.

    2016-10-01

    The paper presents a laser monitor with 10 μs time-resolution based on a high-frequency copper bromide vapor brightness amplifier. A sync circuit has been designed for single-pulse imaging. The analysis of amplifying characteristics of the active elements and active optical system (laser monitor) parameters allowed to determine the optimal concentration of HBr at which the images can be obtained with minimum distortions. For the active element operating at high frequencies (more than 50 kHz) as a brightness amplifier, the concentration of HBr must be lower than that needed for obtaining the maximum output power. The limiting brightness temperature of the background radiation which does not affect the image quality is determined. The potential feasibility of using a proposed brightness amplifier for visualizing processes blocked from viewing by the background radiation with the brightness temperature up to 8000 K is demonstrated.

  19. High Magnetic Field-Induced Formation of Banded Microstructures in Lamellar Eutectic Alloys During Directional Solidification

    Science.gov (United States)

    Li, Xi; Fautrelle, Yves; Gagnoud, Annie; Ren, Zhongming; Moreau, Rene

    2016-08-01

    The influences of high magnetic field (up to 12 T) on the morphology of Pb-Sn and Al-Al2Cu lamellar eutectics during directional solidification were investigated. The experimental results indicate that, along with a decrease in eutectic spacing, the banded structure forms at lower growth speeds under high magnetic field and the band spacing decreases as the magnetic field increases. Moreover, the application of a magnetic field enriches the Cu solute in the liquid ahead of the liquid/solid interface during directional solidification of an Al-Al2Cu eutectic alloy. The effects of high magnetic field on the eutectic points of non-ferromagnetic alloys and the stress acting on the eutectic lamellae during directional solidification have been studied. Both thermodynamic evaluation and DTA measurements reveal that the high magnetic field has a negligible effect on the eutectic points of non-ferromagnetic alloys. However, the high magnetic field caused an increase of the nucleation temperature and undercooling. The numerical results indicate that a considerable stress is produced on the eutectic lamellae during directional solidification under high magnetic field. The formation of a banded structure in a lamellar eutectic during directional solidification under high magnetic field may be attributed to both the buildup of the solute in the liquid ahead of the liquid/solid interface and the stress acting on the eutectic lamellae.

  20. Brightness of synchrotron radiation from wigglers

    CERN Document Server

    Geloni, Gianluca; Saldin, Evgeni

    2014-01-01

    According to literature, while calculating the brightness of synchrotron radiation from wigglers, one needs to account for the so called `depth-of-field' effects. In fact, the particle beam cross section varies along the wiggler. It is usually stated that the effective photon source size increases accordingly, while the brightness is reduced. Here we claim that this is a misconception originating from an analysis of the wiggler source based on geometrical arguments, regarded as almost self-evident. According to electrodynamics, depth-of-field effects do not exist: we demonstrate this statement both theoretically and numerically, using a well-known first-principle computer code. This fact shows that under the usually accepted approximations, the description of the wiggler brightness turns out to be inconsistent even qualitatively. Therefore, there is a need for a well-defined procedure for computing the brightness from a wiggler source. We accomplish this task based on the use of a Wigner function formalism. I...

  1. The Aspect of the Brightness Sensitivity in the Parafovea and Perifovea

    OpenAIRE

    石垣, 尚男

    1984-01-01

    Summary of experiment 1 Using the reaction time method, the brightness sensitivity of 15 retinal loci in the perifovea around the fovea were measured. Stimulus condition : 5′, 16Nit. 100msec, photopic vision Stimulus retinal locus : 6°, 8°, 10° from the fovea, 5 directions on the perifovea in the right eye Subject : 10 right hand dominant subjects Results The nearer to the fovea the retinal locus was, the better the brightness sensitivity in the perifovea was. The brightness sensitivity from ...

  2. The analogy between stereo depth and brightness.

    Science.gov (United States)

    Brookes, A; Stevens, K A

    1989-01-01

    Apparent depth in stereograms exhibits various simultaneous-contrast and induction effects analogous to those reported in the luminance domain. This behavior suggests that stereo depth, like brightness, is reconstructed, ie recovered from higher-order spatial derivatives or differences of the original signal. The extent to which depth is analogous to brightness is examined. There are similarities in terms of contrast effects but dissimilarities in terms of the lateral inhibition effects traditionally attributed to underlying spatial-differentiation operators.

  3. Bright light-emitting diodes based on organometal halide perovskite.

    Science.gov (United States)

    Tan, Zhi-Kuang; Moghaddam, Reza Saberi; Lai, May Ling; Docampo, Pablo; Higler, Ruben; Deschler, Felix; Price, Michael; Sadhanala, Aditya; Pazos, Luis M; Credgington, Dan; Hanusch, Fabian; Bein, Thomas; Snaith, Henry J; Friend, Richard H

    2014-09-01

    Solid-state light-emitting devices based on direct-bandgap semiconductors have, over the past two decades, been utilized as energy-efficient sources of lighting. However, fabrication of these devices typically relies on expensive high-temperature and high-vacuum processes, rendering them uneconomical for use in large-area displays. Here, we report high-brightness light-emitting diodes based on solution-processed organometal halide perovskites. We demonstrate electroluminescence in the near-infrared, green and red by tuning the halide compositions in the perovskite. In our infrared device, a thin 15 nm layer of CH3NH3PbI(3-x)Cl(x) perovskite emitter is sandwiched between larger-bandgap titanium dioxide (TiO2) and poly(9,9'-dioctylfluorene) (F8) layers, effectively confining electrons and holes in the perovskite layer for radiative recombination. We report an infrared radiance of 13.2 W sr(-1) m(-2) at a current density of 363 mA cm(-2), with highest external and internal quantum efficiencies of 0.76% and 3.4%, respectively. In our green light-emitting device with an ITO/PEDOT:PSS/CH3NH3PbBr3/F8/Ca/Ag structure, we achieved a luminance of 364 cd m(-2) at a current density of 123 mA cm(-2), giving external and internal quantum efficiencies of 0.1% and 0.4%, respectively. We show, using photoluminescence studies, that radiative bimolecular recombination is dominant at higher excitation densities. Hence, the quantum efficiencies of the perovskite light-emitting diodes increase at higher current densities. This demonstration of effective perovskite electroluminescence offers scope for developing this unique class of materials into efficient and colour-tunable light emitters for low-cost display, lighting and optical communication applications.

  4. Penalized Likelihood Methods for Estimation of Sparse High Dimensional Directed Acyclic Graphs

    CERN Document Server

    Shojaie, Ali

    2009-01-01

    Directed acyclic graphs (DAGs) are commonly used to represent causal relationships among random variables in graphical models. Applications of these models arise in the study of physical, as well as biological systems, where directed edges between nodes represent the influence of components of the system on each other. The general problem of estimating DAGs from observed data is computationally NP-hard, Moreover two directed graphs may be observationally equivalent. When the nodes exhibit a natural ordering, the problem of estimating directed graphs reduces to the problem of estimating the structure of the network. In this paper, we propose a penalized likelihood approach that directly estimates the adjacency matrix of DAGs. Both lasso and adaptive lasso penalties are considered and an efficient algorithm is proposed for estimation of high dimensional DAGs. We study variable selection consistency of the two penalties when the number of variables grows to infinity with the sample size. We show that although la...

  5. Brightness measurement of an electron impact gas ion source for proton beam writing applications

    Energy Technology Data Exchange (ETDEWEB)

    Liu, N.; Santhana Raman, P. [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117583 (Singapore); Xu, X.; Pang, R.; Kan, J. A. van, E-mail: phyjavk@nus.edu.sg [Centre for Ion Beam Applications, Department of Physics, National University of Singapore, Singapore 117542 (Singapore); Khursheed, A. [Department of Electrical and Computer Engineering, National University of Singapore, Singapore 117583 (Singapore)

    2016-02-15

    We are developing a high brightness nano-aperture electron impact gas ion source, which can create ion beams from a miniature ionization chamber with relatively small virtual source sizes, typically around 100 nm. A prototype source of this kind was designed and successively micro-fabricated using integrated circuit technology. Experiments to measure source brightness were performed inside a field emission scanning electron microscope. The total output current was measured to be between 200 and 300 pA. The highest estimated reduced brightness was found to be comparable to the injecting focused electron beam reduced brightness. This translates into an ion reduced brightness that is significantly better than that of conventional radio frequency ion sources, currently used in single-ended MeV accelerators.

  6. High gradient magnetic beneficiation of dry pulverized coal via upwardly directed recirculating fluidization

    Science.gov (United States)

    Eissenberg, David M.; Liu, Yin-An

    1980-01-01

    This invention relates to an improved device and method for the high gradient magnetic beneficiation of dry pulverized coal, for the purpose of removing sulfur and ash from the coal whereby the product is a dry environmentally acceptable, low-sulfur fuel. The process involves upwardly directed recirculating air fluidization of selectively sized powdered coal in a separator having sections of increasing diameters in the direction of air flow, with magnetic field and flow rates chosen for optimum separations depending upon particulate size.

  7. On-chip three-dimensional high-Q microcavities fabricated by femtosecond laser direct writing

    OpenAIRE

    Lin, Jintian; Yu, Shangjie; Ma, Yaoguang; Fang, Wei; Fei HE; Qiao, Lingling; Tong, Limin; Cheng, Ya; Xu, Zhizhan

    2011-01-01

    We report on the fabrication of three-dimensional (3D) high-Q whispering gallery microcavities on a fused silica chip by femtosecond laser microfabriction, enabled by the 3D nature of femtosecond laser direct writing. The processing mainly consists of formation of freestanding microdisks by femtosecond laser direct writing and subsequent wet chemical etching. CO2 laser annealing is followed to smooth the microcavity surface. Microcavities with arbitrary tilting angle, lateral and vertical pos...

  8. Topology Management Algorithms for Large Scale Aerial High Capacity Directional Networks

    Science.gov (United States)

    2016-11-01

    Introduction of classes of topology management algo- rithms and example implementations of each • Performance evaluation of the algorithms in 2 example relevant...Topology Management Algorithms for Large-Scale Aerial High Capacity Directional Networks Joy Wang, Thomas Shake, Patricia Deutsch, Andrea Coyle, Bow...airborne backbone network is large- scale topology management of directional links in a dynamic environment. In this paper, we present several

  9. Design and static performance of high speed machining centre with "direct drive"

    Institute of Scientific and Technical Information of China (English)

    Shuhong XIAO; Yulian CHEN; Guangyuan ZHENG

    2009-01-01

    "Direct drive" is an ideal method for speeding machine tools. In the structure of a CNC machining centre with "direct drive", the linear motor's primary and secondary parts are assembled into the worktable and machine bed respectively to directly drive the worktable. The built-in rotary motor is assembled in the spindle to realize the main transmission system of the machine tool "direct drive". All mechanical transmission elements in machine tools are eliminated. High speed, efficiency, and accuracy are easily obtained. However, in this type of "direct drive" machining centre, the magnetic attraction force between the primary and the secondary linear motors and the dynamic impact at acceleration and deceleration are directly imposed on the machine tool, and influence the performance of the machining centre. This paper analyzes the special demands of "direct drive" on the machine centre, and introduces a new structure of the machining tool. The worktable and machine bed are optimized to meet the special demands of "direct drive". Static performance simulation on the machining centre is done to reveal an ideal result.

  10. High angle of attack: Forebody flow physics and design emphasizing directional stability

    Science.gov (United States)

    Ravi, R.

    A framework for understanding the fundamental physics of flowfields over forebody type shapes at low speed, high angle of attack conditions with special emphasis on sideslip has been established. Computational Fluid Dynamics (CFD) has been used to study flowfieids over experimentally investigated forebodies: the Lamont tangent-ogive forebody, the F-5A forebody and the Erickson chine forebody. A modified version of a current advanced code, CFL3D, was used to solve the Euler and thin-layer Navier-Stokes equations. The Navier-Stokes equations used a form of the Baldwin-Lomax turbulence model modified to account for massive crossflow separation. Using the insight provided by the solutions obtained using CFD, together with comparison with limited available data, the aerodynamics of forebodies with positive directional stability has been revealed. An unconventional way of presenting the results is used to illustrate how a positive contribution to directional stability arises. Based on this new understanding, a parametric study was then conducted to determine which shapes promote a positive contribution to directional stability. The effect of cross-sectional shape on directional stability was found to be very significant. Broad chine-shaped cross-sections were found to promote directional stability. Also, directional stability is improved if the chine is placed closer to the top of the cross-section. Planform shapes also played an important role in determining the forebody directional stability characteristics. This initial parametric study has been used to propose some guidelines for aerodynamic design to promote positive directional stability.

  11. Direct selective laser sintering of high performance metals: Machine design, process development and process control

    Science.gov (United States)

    Das, Suman

    1998-11-01

    This dissertation describes the development of an advanced manufacturing technology known as Direct Selective Laser Sintering (Direct SLS). Direct SLS is a laser based rapid manufacturing technology that enables production of functional, fully dense, metal and cermet components via the direct, layerwise consolidation of constituent powders. Specifically, this dissertation focuses on a new, hybrid net shape manufacturing technique known as Selective Laser Sintering/Hot Isostatic Pressing (SLS/HIP). The objective of research presented in this dissertation was to establish the fundamental machine technology and processing science to enable direct SLS fabrication of metal components composed of high performance, high temperature metals and alloys. Several processing requirements differentiate direct SLS of metals from SLS of polymers or polymer coated powders. Perhaps the most important distinguishing characteristic is the regime of high temperatures involved in direct SLS of metals. Biasing the temperature of the feedstock powder via radiant preheat prior to and during SLS processing was shown to be beneficial. Preheating the powder significantly influenced the flow and wetting characteristics of the melt. During this work, it was conclusively established that powder cleanliness is of paramount importance for successful layerwise consolidation of metal powders by direct SLS. Sequential trials were conducted to establish optimal bake-out and degas cycles under high vacuum. These cycles agreed well with established practices in the powder metallurgy industry. A study of some of the important transport mechanisms in direct SLS of metals was undertaken to obtain a fundamental understanding of the underlying process physics. This study not only provides an explanation of phenomena observed during SLS processing of a variety of metallic materials but also helps in developing selection schemes for those materials that are most amenable to direct SLS processing. The

  12. Production of strongly bound 39K bright solitons

    CERN Document Server

    Lepoutre, S; Boissé, A; Berthet, G; Salomon, G; Aspect, A; Bourdel, T

    2016-01-01

    We report on the production of 39 K matter-wave bright solitons, i.e., 1D matter-waves that propagate without dispersion thanks to attractive interactions. The volume of the soliton is studied as a function of the scattering length through three-body losses, revealing peak densities as high as $\\sim 5 \\times 10^{20} m^{-3}$. Our solitons, close to the collapse threshold, are strongly bound and will find applications in fundamental physics and atom interferometry.

  13. Directional transport of high-temperature Janus droplets mediated by structural topography

    Science.gov (United States)

    Li, Jing; Hou, Youmin; Liu, Yahua; Hao, Chonglei; Li, Minfei; Chaudhury, Manoj K.; Yao, Shuhuai; Wang, Zuankai

    2016-06-01

    Directed motion of liquid droplets is of considerable importance in various water and thermal management technologies. Although various methods to generate such motion have been developed at low temperature, they become rather ineffective at high temperature, where the droplet transits to a Leidenfrost state. In this state, it becomes challenging to control and direct the motion of the highly mobile droplets towards specific locations on the surface without compromising the effective heat transfer. Here we report that the wetting symmetry of a droplet can be broken at high temperature by creating two concurrent thermal states (Leidenfrost and contact-boiling) on a topographically patterned surface, thus engendering a preferential motion of a droplet towards the region with a higher heat transfer coefficient. The fundamental understanding and the ability to control the droplet dynamics at high temperature have promising applications in various systems requiring high thermal efficiency, operational security and fidelity.

  14. Normal Globular Cluster Systems in Massive Low Surface Brightness Galaxies

    CERN Document Server

    Villegas, Daniela; Jordán, Andrés; Goudfrooij, Paul; Zwaan, Martin

    2007-01-01

    We present the results of a study of the globular cluster systems of 6 massive spiral galaxies, originally cataloged as low surface brightness galaxies but here shown to span a wide range of central surface brightness values, including two intermediate to low surface brightness galaxies. We used the Advanced Camera for Surveys on board HST to obtain photometry in the F475W and F775W bands and select sources with photometric and morphological properties consistent with those of globular clusters. A total of 206 candidates were identified in our target galaxies. From a direct comparison with the Galactic globular cluster system we derive specific frequency values for each galaxy that are in the expected range for late-type galaxies. We show that the globular cluster candidates in all galaxies have properties consistent with globular cluster systems of previously studied galaxies in terms of luminosity, sizes and color. We establish the presence of globular clusters in the two intermediate to low surface brightn...

  15. An Annotated Bibliography of High-Voltage Direct-Current Transmission and Flexible AC Transmission (FACTS) Devices, 1991-1993.

    Energy Technology Data Exchange (ETDEWEB)

    Litzenberger, Wayne; Lava, Val

    1994-08-01

    References are contained for HVDC systems, converter stations and components, overhead transmission lines, cable transmission, system design and operations, simulation of high voltage direct current systems, high-voltage direct current installations, and flexible AC transmission system (FACTS).

  16. Early Left Parietal Activity Elicited by Direct Gaze: A High-Density EEG Study

    Science.gov (United States)

    Burra, Nicolas; Kerzel, Dirk; George, Nathalie

    2016-01-01

    Gaze is one of the most important cues for human communication and social interaction. In particular, gaze contact is the most primary form of social contact and it is thought to capture attention. A very early-differentiated brain response to direct versus averted gaze has been hypothesized. Here, we used high-density electroencephalography to test this hypothesis. Topographical analysis allowed us to uncover a very early topographic modulation (40–80 ms) of event-related responses to faces with direct as compared to averted gaze. This modulation was obtained only in the condition where intact broadband faces–as opposed to high-pass or low-pas filtered faces–were presented. Source estimation indicated that this early modulation involved the posterior parietal region, encompassing the left precuneus and inferior parietal lobule. This supports the idea that it reflected an early orienting response to direct versus averted gaze. Accordingly, in a follow-up behavioural experiment, we found faster response times to the direct gaze than to the averted gaze broadband faces. In addition, classical evoked potential analysis showed that the N170 peak amplitude was larger for averted gaze than for direct gaze. Taken together, these results suggest that direct gaze may be detected at a very early processing stage, involving a parallel route to the ventral occipito-temporal route of face perceptual analysis. PMID:27880776

  17. Physical characteristics of bright Class I methanol masers

    Science.gov (United States)

    Leurini, S.; Menten, K. M.; Walmsley, C. M.

    2016-07-01

    Context. Class I methanol masers are thought to be tracers of interstellar shock waves. However, they have received relatively little attention mostly as a consequence of their low luminosities compared to other maser transitions. This situation has changed recently and Class I methanol masers are now routinely used as signposts of outflow activity especially in high extinction regions. The recent detection of polarisation in Class I lines now makes it possible to obtain direct observational information about magnetic fields in interstellar shocks. Aims: We make use of newly calculated collisional rate coefficients for methanol to investigate the excitation of Class I methanol masers and to reconcile the observed Class I methanol maser properties with model results. Methods: We performed large velocity gradient calculations with a plane-parallel slab geometry appropriate for shocks to compute the pump and loss rates which regulate the interactions of the different maser systems with the maser reservoir. We study the dependence of the pump rate coefficient, the maser loss rate, and the inversion efficiency of the pumping scheme of several Class I masers on the physics of the emitting gas. Results: We predict inversion in all transitions where maser emission is observed. Bright Class I methanol masers are mainly high-temperature (>100 K) high-density (n(H2) ~ 107-108 cm-3) structures with methanol maser emission measures, ξ, corresponding to high methanol abundances close to the limits set by collisional quenching. Our model predictions reproduce reasonably well most of the observed properties of Class I methanol masers. Class I masers in the 25 GHz series are the most sensitive to the density of the medium and mase at higher densities than other lines. Moreover, even at high density and high methanol abundances, their luminosity is predicted to be lower than that of the 44 GHz and 36 GHz masers. Our model predictions also reflect the observational result that the

  18. Proxy magnetometry of the photosphere: why are G-band bright points so bright?

    NARCIS (Netherlands)

    Rutten, R.J.; Kiselman, Dan; Voort, Luc Rouppe van der; Plez, Bertrand

    2000-01-01

    We discuss the formation of G-band bright points in terms of standard uxtube modeling, in particular the 1D LTE models constructed by Solanki and coworkers. Combined with LTE spectral synthesis they explain observed G-band bright point contrasts quite well. The G-band contrast increase over the cont

  19. A selective deficit in the appreciation and recognition of brightness: brightness agnosia?

    NARCIS (Netherlands)

    Nijboer, T.C.W.; Nys, G.M.S.; van der Smagt, M.J.; de Haan, E.H.F.

    2009-01-01

    We report a patient with extensive brain damage in the right hemisphere who demonstrated a severe impairment in the appreciation of brightness. Acuity, contrast sensitivity as well as luminance discrimination were normal, suggesting her brightness impairment is not a mere consequence of low-level

  20. Discovery of two new bright magnetic B stars: i Car and Atlas

    CERN Document Server

    Neiner, Coralie; Oksala, Mary E; Blazere, Aurore

    2015-01-01

    The BRITE (BRIght Target Explorer) constellation of nano-satellites performs seismology of bright stars via high precision photometry. In this context, we initiated a high resolution, high signal-to-noise, high sensitivity, spectropolarimetric survey of all stars brighter than V=4. The goal of this survey is to detect new bright magnetic stars and provide prime targets for both detailed magnetic studies and asteroseismology with BRITE. Circularly polarised spectra were acquired with Narval at TBL (France) and HarpsPol at ESO in La Silla (Chile). We discovered two new magnetic B stars: the B3V star i Car and the B8V component of the binary star Atlas. Each star was observed twice to confirm the magnetic detections and check for variability. These bright magnetic B stars are prime targets for asteroseismology and for flux-demanding techniques, such as interferometry.

  1. TLC-Direct Bioautography as a High Throughput Method for Detection of Antimicrobials in Plants

    Directory of Open Access Journals (Sweden)

    Irena M. Choma

    2015-05-01

    Full Text Available The richness of bioactive compounds in plant materials encourages continuous development of separation methods and bioassays for their isolation and identification. Thin-layer chromatography-direct bioautography links separation on the adsorbent layer with biological tests performed directly on it. Therefore, the method is very convenient for searching plant constituents with biological activity, such as antibiotics. Test bacteria grow directly on a plate surface excluding places where antibacterials are located. They can be detected with reagents converted by living bacteria. TLC-DB is a high throughput method enabling analyses of many samples in parallel and the comparison of their activity. Both screening and semi-quantitative analysis is possible. The targeted compounds can be identified using spectroscopic methods, mostly mass spectrometry, that can be performed directly on a TLC plate. This paper discusses all above mentioned aspects of TLC-DB, illustrating them with literature, schemes and our own results.

  2. High-throughput STR analysis for DNA database using direct PCR.

    Science.gov (United States)

    Sim, Jeong Eun; Park, Su Jeong; Lee, Han Chul; Kim, Se-Yong; Kim, Jong Yeol; Lee, Seung Hwan

    2013-07-01

    Since the Korean criminal DNA database was launched in 2010, we have focused on establishing an automated DNA database profiling system that analyzes short tandem repeat loci in a high-throughput and cost-effective manner. We established a DNA database profiling system without DNA purification using a direct PCR buffer system. The quality of direct PCR procedures was compared with that of conventional PCR system under their respective optimized conditions. The results revealed not only perfect concordance but also an excellent PCR success rate, good electropherogram quality, and an optimal intra/inter-loci peak height ratio. In particular, the proportion of DNA extraction required due to direct PCR failure could be minimized to direct PCR system can be adopted for automated DNA database profiling systems to replace or supplement conventional PCR system in a time- and cost-saving manner.

  3. Bright spots among the world’s coral reefs

    Science.gov (United States)

    Cinner, Joshua E.; Huchery, Cindy; MacNeil, M. Aaron; Graham, Nicholas A. J.; McClanahan, Tim R.; Maina, Joseph; Maire, Eva; Kittinger, John N.; Hicks, Christina C.; Mora, Camilo; Allison, Edward H.; D'Agata, Stephanie; Hoey, Andrew; Feary, David A.; Crowder, Larry; Williams, Ivor D.; Kulbicki, Michel; Vigliola, Laurent; Wantiez, Laurent; Edgar, Graham; Stuart-Smith, Rick D.; Sandin, Stuart A.; Green, Alison L.; Hardt, Marah J.; Beger, Maria; Friedlander, Alan; Campbell, Stuart J.; Holmes, Katherine E.; Wilson, Shaun K.; Brokovich, Eran; Brooks, Andrew J.; Cruz-Motta, Juan J.; Booth, David J.; Chabanet, Pascale; Gough, Charlie; Tupper, Mark; Ferse, Sebastian C. A.; Sumaila, U. Rashid; Mouillot, David

    2016-07-01

    Ongoing declines in the structure and function of the world’s coral reefs require novel approaches to sustain these ecosystems and the millions of people who depend on them. A presently unexplored approach that draws on theory and practice in human health and rural development is to systematically identify and learn from the ‘outliers’—places where ecosystems are substantially better (‘bright spots’) or worse (‘dark spots’) than expected, given the environmental conditions and socioeconomic drivers they are exposed to. Here we compile data from more than 2,500 reefs worldwide and develop a Bayesian hierarchical model to generate expectations of how standing stocks of reef fish biomass are related to 18 socioeconomic drivers and environmental conditions. We identify 15 bright spots and 35 dark spots among our global survey of coral reefs, defined as sites that have biomass levels more than two standard deviations from expectations. Importantly, bright spots are not simply comprised of remote areas with low fishing pressure; they include localities where human populations and use of ecosystem resources is high, potentially providing insights into how communities have successfully confronted strong drivers of change. Conversely, dark spots are not necessarily the sites with the lowest absolute biomass and even include some remote, uninhabited locations often considered near pristine. We surveyed local experts about social, institutional, and environmental conditions at these sites to reveal that bright spots are characterized by strong sociocultural institutions such as customary taboos and marine tenure, high levels of local engagement in management, high dependence on marine resources, and beneficial environmental conditions such as deep-water refuges. Alternatively, dark spots are characterized by intensive capture and storage technology and a recent history of environmental shocks. Our results suggest that investments in strengthening fisheries

  4. Lasing in dark and bright modes of a finite-sized plasmonic lattice

    CERN Document Server

    Hakala, T K; Väkeväinen, A I; Martikainen, J -P; Moilanen, A J; Törmä, P

    2016-01-01

    Lasing at the nanometer scale promises strong light-matter interactions and ultrafast operation. The first realizations of nanoscale lasing have been achieved but suffer from losses and lack of beam directionality. Band-edge lasing in periodic plasmonic structures offered an improvement but radiative losses remained high. Intriguingly, plasmonic nanoparticle arrays support also non-radiative dark modes that offer longer life-times but are inaccessible to far field radiation. Here, we show lasing both in dark and bright modes of an array of silver nanoparticles combined with optically pumped dye molecules. Linewidths of 0.2 nanometers at visible wavelengths and room temperature are observed. Access to the dark modes is provided by a coherent out-coupling mechanism based on the finite size of the array. The results open a route to utilize all modes of plasmonic lattices, also the high-Q ones, for studies of strong light-matter interactions, condensation and photon fluids.

  5. Rapid High-throughput Species Identification of Botanical Material Using Direct Analysis in Real Time High Resolution Mass Spectrometry.

    Science.gov (United States)

    Lesiak, Ashton D; Musah, Rabi A

    2016-10-02

    We demonstrate that direct analysis in real time-high resolution mass spectrometry can be used to produce mass spectral profiles of botanical material, and that these chemical fingerprints can be used for plant species identification. The mass spectral data can be acquired rapidly and in a high throughput manner without the need for sample extraction, derivatization or pH adjustment steps. The use of this technique bypasses challenges presented by more conventional techniques including lengthy chromatography analysis times and resource intensive methods. The high throughput capabilities of the direct analysis in real time-high resolution mass spectrometry protocol, coupled with multivariate statistical analysis processing of the data, provide not only class characterization of plants, but also yield species and varietal information. Here, the technique is demonstrated with two psychoactive plant products, Mitragyna speciosa (Kratom) and Datura (Jimsonweed), which were subjected to direct analysis in real time-high resolution mass spectrometry followed by statistical analysis processing of the mass spectral data. The application of these tools in tandem enabled the plant materials to be rapidly identified at the level of variety and species.

  6. Rapid High-throughput Species Identification of Botanical Material Using Direct Analysis in Real Time High Resolution Mass Spectrometry

    Science.gov (United States)

    Lesiak, Ashton D.; Musah, Rabi A.

    2016-01-01

    We demonstrate that direct analysis in real time-high resolution mass spectrometry can be used to produce mass spectral profiles of botanical material, and that these chemical fingerprints can be used for plant species identification. The mass spectral data can be acquired rapidly and in a high throughput manner without the need for sample extraction, derivatization or pH adjustment steps. The use of this technique bypasses challenges presented by more conventional techniques including lengthy chromatography analysis times and resource intensive methods. The high throughput capabilities of the direct analysis in real time-high resolution mass spectrometry protocol, coupled with multivariate statistical analysis processing of the data, provide not only class characterization of plants, but also yield species and varietal information. Here, the technique is demonstrated with two psychoactive plant products, Mitragyna speciosa (Kratom) and Datura (Jimsonweed), which were subjected to direct analysis in real time-high resolution mass spectrometry followed by statistical analysis processing of the mass spectral data. The application of these tools in tandem enabled the plant materials to be rapidly identified at the level of variety and species. PMID:27768072

  7. A selective deficit in the appreciation and recognition of brightness: brightness agnosia?

    Science.gov (United States)

    Nijboer, Tanja C W; Nys, Gudrun M S; van der Smagt, Maarten J; de Haan, Edward H F

    2009-01-01

    We report a patient with extensive brain damage in the right hemisphere who demonstrated a severe impairment in the appreciation of brightness. Acuity, contrast sensitivity as well as luminance discrimination were normal, suggesting her brightness impairment is not a mere consequence of low-level sensory impairments. The patient was not able to indicate the darker or the lighter of two grey squares, even though she was able to see that they differed. In addition, she could not indicate whether the lights in a room were switched on or off, nor was she able to differentiate between normal greyscale images and inverted greyscale images. As the patient recognised objects, colours, and shapes correctly, the impairment is specific for brightness. As low-level, sensory processing is normal, this specific deficit in the recognition and appreciation of brightness appears to be of a higher, cognitive level, the level of semantic knowledge. This appears to be the first report of 'brightness agnosia'.

  8. Hydrodynamic Instability in High-speed Direct Laser Deposition for Additive Manufacturing

    Science.gov (United States)

    Turichin, Gleb; Zemlyakov, Evgeny; Klimova, Olga; Babkin, Konstantin

    High speed direct laser deposition, when product forms from metal powder, transferred by gas-powder jet, supplied coaxially or non-coaxially to focused laser beam, in one of most prospective additive technologies for production parts for aircraft engines. The limit of process productivity is connected with development of hydrodynamic instability of the melt pool in conditions of high power laser action and material supply by gas-powder jet. Theoretical analysis and experiments allowed clarified a physical nature of instability appearance, determine a stability conditions and invent a methods which allow avoid instability in deposition process. Nozzles for direct laser deposition, designed with consideration of stability conditions, allow get a level of process productivity more then 2 kg/h. The developed technology of deposition and technological equipment, based on high power fiber laser, has been used for manufacturing of parts for "high temperature" unit of aircraft engine.

  9. Automated work-flow for processing high-resolution direct infusion electrospray ionization mass spectral fingerprints

    DEFF Research Database (Denmark)

    Hansen, Michael Adsetts Edberg; Smedsgaard, Jørn

    2007-01-01

    The use of mass spectrometry (MS) is pivotal in analyses of the metabolome and presents a major challenge for subsequent data processing. While the last few years have given new high performance instruments, there has not been a comparable development in data processing. In this paper we discuss...... an automated data processing pipeline to compare large numbers of fingerprint spectra from direct infusion experiments analyzed by high resolution MS. We describe some of the intriguing problems that have to be addressed. starting with the conversion and pre-processing of the raw data to the final data...... analysis. Illustrated on the direct infusion analysis (ESI-TOF-MS) of complex mixtures the method exploits the full quality of the high-resolution present in the mass spectra. Although the method is illustrated as a new library search method for high resolution MS, we demonstrate that the output...

  10. Analysis of highly directive photoconductive dipole antenna at terahertz frequency for sensing and imaging applications

    Science.gov (United States)

    Malhotra, Isha; Ranjan Jha, Kumud; Singh, G.

    2017-08-01

    In this paper, we have analyzed a photoconductive dipole antenna at terahertz (THz) frequency for sensing and imaging applications. For these applications, to detect powdered explosives, there is a need to have an image of the object under detection with high resolution to distinguish suspicious items from the normal background. The THz antenna is one of the most important components in a THz sensing and imaging system and there is a need to have such a transmitting THz source with high directivity and optimum radiation efficiency. Therefore, to achieve this, we have explored three photoconductive dipole antenna configurations to enhance the directivity and radiation efficiency. With the use of a simple dipole antenna and silicon lens, we are able to achieve the directivity of 10.7dBi and radiation efficiency of 91.59% in both E-plane and H-plane.

  11. Bright stars observed by FIMS/SPEAR

    CERN Document Server

    Jo, Young-Soo; Min, Kyoung-Wook; Choi, Yeon-Ju; Lim, Tae-Ho; Lim, Yeo-Myeong; Edelstein, Jerry; Han, Wonyong

    2015-01-01

    In this paper, we present a catalogue of the spectra of bright stars observed during the sky survey using the Far-Ultraviolet Imaging Spectrograph (FIMS), which was designed primarily to observe diffuse emissions. By carefully eliminating the contamination from the diffuse background, we obtain the spectra of 70 bright stars observed for the first time with a spectral resolution of 2--3 {\\AA} over the wavelength of 1370--1710 {\\AA}. The far-ultraviolet spectra of an additional 139 stars are also extracted with a better spectral resolution and/or higher reliability than those of the previous observations. The stellar spectral type of the stars presented in the catalogue spans from O9 to A3. The method of spectral extraction of the bright stars is validated by comparing the spectra of 323 stars with those of the International Ultraviolet Explorer (IUE) observations.

  12. Brightness discrimination in budgerigars (Melopsittacus undulatus.

    Directory of Open Access Journals (Sweden)

    Olle Lind

    Full Text Available Birds have excellent spatial acuity and colour vision compared to other vertebrates while spatial contrast sensitivity is relatively poor for unknown reasons. Contrast sensitivity describes the detection of gratings of varying spatial frequency. It is unclear whether bird brightness discrimination between large uniform fields is poor as well. Here we show that budgerigars (Melopsittacus undulatus need a Michelson contrast of 0.09 to discriminate between large spatially separated achromatic fields in bright light conditions. This is similar to the peak contrast sensitivity of 10.2 (0.098 Michelson contrast for achromatic grating stimuli established in earlier studies. The brightness discrimination threshold described in Weber fractions is 0.18, which is modest compared to other vertebrates.

  13. Maintenance therapy with histamine plus IL-2 induces a striking expansion of two CD56bright NK cell subpopulations in patients with acute myeloid leukemia and supports their activation

    Science.gov (United States)

    Cerny-Reiterer, Sabine; Gleixner, Karoline V.; Stefanzl, Gabriele; Basilio, Jose; Herndlhofer, Susanne; Sperr, Wolfgang R.; Brons, Nicolaas H.C.; Casanova, Emilio; Zimmer, Jacques; Valent, Peter; Hofer, Erhard

    2016-01-01

    Histamine dihydrochloride (HDC) plus IL-2 has been proposed as a novel maintenance-immunotherapy in acute myeloid leukemia (AML). We analyzed the immunophenotype and function of natural killer (NK) cells in blood of AML patients treated after chemotherapy with HDC plus IL-2. The treatment caused a striking expansion of CD56brightCD16neg and CD56brightCD16low NK cell subpopulations. A reduced NK cell fraction recovered and high proportions of cells expressed the activating receptors NKG2D, NKp30, and NKp46. Concomitantly, KIR-expressing NK cells were reduced and NK cells with inhibitory NKG2A/CD94 receptors increased beyond normal levels. In addition, the immunotherapy-induced NK cells exhibited high capacity to produce IFN-γ and to degranulate. Furthermore, we provide evidence from subsequent in vitro studies that this is caused in part by direct effects of IL-2 on the CD56bright cells. IL-2 specifically induced proliferation of both CD56bright subpopulations, but not of CD56dim cells. It further preserved the expression of activating receptors and the capacity to produce IFN-γ and to degranulate. These data suggest that therapy with HDC plus IL-2 supports the reconstitution of a deficient NK cell fraction through the specific amplification of CD56bright NK cells giving rise to a functional NK cell compartment with high potential to combat leukemic disease. PMID:27341131

  14. Laser direct writing of carbon/Au composite electrodes for high-performance micro-supercapacitors

    Science.gov (United States)

    Cai, Jinguang; Watanabe, Akira; Lv, Chao

    2017-02-01

    Micro-supercapacitors with small size, light weight, flexibility while maintaining high energy and power output are required for portable miniaturized electronics. The fabrication methods and materials should be cost-effective, scalable, and easily integrated to current electronic industry. Carbon materials have required properties for high-performance flexible supercapacitors, including high specific surface areas, electrochemical stability, and high electrical conductivity, as well as the high mechanical tolerance. Laser direct writing method is a non-contact, efficient, single-step fabrication technique without requirements of masks, post-processing, and complex clean room, which is a useful patterning technique, and can be easily integrated with current electronic product lines for commercial use. Previously we have reported micro-supercapacitors fabricated by laser direct writing on polyimide films in air or Ar, which showed highcapacitive performance. However, the conductivity of the carbon materials is still low for fast charge-discharge use. Here, we demonstrated the fabrication of flexible carbon/Au composite high-performance MSCs by first laser direct writing on commercial polyimide films followed by spin-coating Au nanoparticles ink and second in-situ laser direct writing using the low-cost semiconductor laser. As-prepared micro-supercapacitors show an improved conductivity and capacitance of 1.17 mF/cm2 at a high scanning rate of 10,000 mV/s, which is comparable to the reported capacitance of carbon-based micro-supercapacitors. In addition, the micro-supercapacitors have high bend tolerance and long-cycle stability.

  15. Changes of high school English teaching model under the directions of new English Curriculum Standard

    Institute of Scientific and Technical Information of China (English)

    杨丽萍

    2014-01-01

    Communications around the world becomes common with the quickening of China’s reform and open door policies and widening of international communications, thus it is very pressing to modify the model of high school English class for students’concept of English use as a tool. This paper focuses on the change of English class teaching model in high schools under the direction of New English Curriculum Standard and its purposes and effects.

  16. FoCal - A high granularity electromagnetic calorimeter for forward direct photon measurements

    Science.gov (United States)

    Zhang, C.

    2017-02-01

    The measurement of direct photon production at forward rapidity (y ∼ 3 - 5) at the LHC provides access to the structure of protons and nuclei at very small values of fractional momentum (x ∼10-5) . FoCal, an extremely-high-granularity Forward Calorimeter covering 3.3 technology for use in the proposed detector upgrade. They also show the extremely high potential of this technology for future calorimeter development.

  17. Increasing the brightness of light sources

    Energy Technology Data Exchange (ETDEWEB)

    Fu, Ling

    2006-11-16

    In this work the principle of light recycling is applied to artificial light sources in order to achieve brightness enhancement. Firstly, the feasibilities of increasing the brightness of light sources via light recycling are examined theoretically, based on the fundamental laws of thermodynamics including Kirchhoff's law on radiation, Planck's law, Lambert-Beer's law, the etendue conservation and the brightness theorem. From an experimental viewpoint, the radiation properties of three different kinds of light sources including short-arc lamps, incandescent lamps and LEDs characterized by their light-generating mechanisms are investigated. These three types of sources are used in light recycling experiments, for the purpose of 1. validating the intrinsic light recycling effect in light sources, e. g. the intrinsic light recycling effect in incandescent lamps stemming from the coiled filament structure. 2. acquiring the required parameters for establishing physical models, e.g. the emissivity/absorptivity of the short-arc lamps, the intrinsic reflectivity and the external quantum efficiency of LEDs. 3. laying the foundations for designing optics aimed at brightness enhancement according to the characteristics of the sources and applications. Based on the fundamental laws and experiments, two physical models for simulating the radiance distribution of light sources are established, one for thermal filament lamps, the other for luminescent sources, LEDs. As validation of the theoretical and experimental investigation of the light recycling effect, an optical device, the Carambola, is designed for achieving deterministic and multiple light recycling. The Carambola has the function of a concentrator. In order to achieve the maximum possible brightness enhancement with the Carambola, several combinations of sources and Carambolas are modelled in ray-tracing simulations. Sources with different light-emitting mechanisms and different radiation properties

  18. Direct measurements of air layer profiles under impacting droplets using high-speed color interferometry

    NARCIS (Netherlands)

    Veen, van der R.C.A.; Tran, A.T.; Lohse, D.; Sun, C.

    2012-01-01

    A drop impacting on a solid surface deforms before the liquid makes contact with the surface. We directly measure the time evolution of the air layer profile under the droplet using high-speed color interferometry, obtaining the air layer thickness before and during the wetting process. Based on the

  19. A Multivariate Analysis of the Effects of the Self-Directed Search on High School Girls.

    Science.gov (United States)

    Holland, John L.; And Others

    1978-01-01

    Determines how the Self-Directed Search (SDS) achieves its effects. High school girls were assessed before and after treatment for vocational aspirations, knowledge of typology, and information seeking. Nonsignificant findings imply that SDS achieves its effects partly because of its numerous occupational options. Instructional booklets increase…

  20. Directionality of the Associations of High School Expectancy-Value, Aspirations, and Attainment: A Longitudinal Study

    Science.gov (United States)

    Guo, Jiesi; Marsh, Herbert W.; Morin, Alexandre J. S.; Parker, Philip D.; Kaur, Gurvinder

    2015-01-01

    (This study examines the directionality of the associations among cognitive assets (IQ, academic achievement), motivational beliefs (academic self-concept, task values), and educational and occupational aspirations over time from late adolescence (Grade 10) into early adulthood (5 years post high school). Participants were from a nationally…

  1. Dynamic effects of social influence and direct marketing on the adoption of high-technology products

    NARCIS (Netherlands)

    Risselada, H.; Verhoef, P.C.; Bijmolt, T.H.A.

    Many firms capitalize on their customers' social networks to improve the success rate of their new products. In this article, the authors analyze the dynamic effects of social influence and direct marketing on the adoption of a new high-technology product. Social influence is likely to play a role

  2. Direct vacuum inlet system enabling highly sensitive in-situ analysis of chemical reaction products

    DEFF Research Database (Denmark)

    Trimarco, Daniel Bøndergaard; Scott, Søren Bertelsen; Pedersen, Thomas

    , a capillary maintaining a controlled flow over a pressure drop to ultra-high vacuum, and inlet and outlet channels for an inert make up gas. The use of a direct inlet enables orders of magnitude higher sensitivity than differentially pumped systems without a loss in time response for volatile products, while...

  3. Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells.

    Science.gov (United States)

    Li, Yinshi; Sun, Xianda; Feng, Ying

    2017-03-11

    Conventionally, both the thermal degradation of the anion-exchange membrane and the requirement of additional hydroxide for fuel oxidation reaction hinder the development of the high-temperature alkaline direct liquid fuel cells. The present work addresses these two issues by reporting a polybenzimidazole-membrane-based direct formate fuel cell (DFFC). Theoretically, the cell voltage of the high-temperature alkaline DFFC can be as high as 1.45 V at 90 °C. It has been demonstrated that a proof-of-concept alkaline DFFC without adding additional hydroxide yields a peak power density of 20.9 mW cm(-2) , an order of magnitude higher than both alkaline direct ethanol fuel cells and alkaline direct methanol fuel cells, mainly because the hydrolysis of formate provides enough OH(-) ions for formate oxidation reaction. It was also found that this hydroxide self-feeding high-temperature alkaline DFFC shows a stable 100 min constant-current discharge at 90 °C, proving the conceptual feasibility.

  4. High-Priority Directions of Modernization of University Education in Innovational Society

    Science.gov (United States)

    Sergeev, Nikolai

    2017-01-01

    Purpose: The purpose of this paper is to verify the offered hypothesis and to determine high-priority directions of modernization of university education in an innovational society by the example of modern Russia. Design/methodology/approach: During the empirical study of connection between university education and innovational development of…

  5. Subfemtosecond X-ray Pulses Produced Directly by High Harmonic Generation

    Institute of Scientific and Technical Information of China (English)

    WANG Ying-Song; XU Zhi-Zhan

    2000-01-01

    The generation of subfemtosecond pulses in hydrogen-like atoms through high-harmonic generation by using superintense multicycle driver pulses is numerically investigated. It is shown that a single subfemtosecond pulse can be directly generated when the driver pulse is strong enough to deplete the neutral atoms within several optical cycles. The propagation effect is neglected during the numerical examinations.

  6. Optimization Tool for Direct Water Cooling System of High Power IGBT Modules

    DEFF Research Database (Denmark)

    Bahman, Amir Sajjad; Blaabjerg, Frede

    2016-01-01

    important issue for thermal design engineers. This paper aims to present a user friendly optimization tool for direct water cooling system of a high power module which enables the cooling system designer to identify the optimized solution depending on customer load profiles and available pump power. CFD...

  7. Effect of Yttrium on High Temperature Oxidation Resistance of a Directionally Solidified Superalloy

    Institute of Scientific and Technical Information of China (English)

    宋立国; 李树索; 郑运荣; 韩雅芳

    2004-01-01

    The effect of rare earth element yttrium on the high temperature oxidation resistance of a directionally solidified Ni-base superalloy was studied with scanning electron microscopy(SEM), energy dispersive spectrum(EDS)and X-ray diffraction(XRD)techniques. The results show that the oxidation resistance of the alloy is substantially improved by adding proper amount of yttrium.

  8. Dynamic effects of social influence and direct marketing on the adoption of high-technology products

    NARCIS (Netherlands)

    Risselada, H.; Verhoef, P.C.; Bijmolt, T.H.A.

    2014-01-01

    Many firms capitalize on their customers' social networks to improve the success rate of their new products. In this article, the authors analyze the dynamic effects of social influence and direct marketing on the adoption of a new high-technology product. Social influence is likely to play a role b

  9. Improvement in brightness of multicusp-plasma ion source

    Energy Technology Data Exchange (ETDEWEB)

    Ji, Q.; Jiang, X.; King, T-J.; Leung, K-N.; Standiford, K.; Wilde, S.B.

    2002-05-24

    The beam brightness of a multicusp-plasma ion source has been substantially improved by optimizing the source configuration and extractor geometry. The current density of a 2 keV He{sup +} beam extracted from a 7.5-cm-diameter source operating at 2.5 kW RF power is {approx}100 mA/cm{sup 2}, which is {approx}10 times larger than that of a beam extracted from a 5-cm-diameter source operating at 1 kW RF power. A smaller focused beam spot size is achieved with a counter-bored extractor instead of a conventional (''through-hole'') extractor, resulting another order of magnitude improvement in beam current density. Measured brightness can be as high as 440 A/cm{sup 2}Sr, which represents a 30 times improvement over prior work.

  10. Cometary activity in 2060 Chiron at minimum brightness

    CERN Document Server

    Silva, A M; Silva, Adrian M.; Cellone, Sergio A.

    2001-01-01

    We present two-colour CCD imaging of 2060 Chiron obtained between 1996 and 1998 with the 2.15 m telescope at CASLEO (San Juan, Argentina). These post-perihelion observations show that Chiron was then near its historical brightness minima, however a coma was clearly detected. The dynamical state of the coma is studied by means of azimuthally averaged surface brightness profiles, which show the signatures of radiation pressure on the dust grain distribution. Aperture photometry shows an achromatic dimming with an amplitude \\~ 0.09 mag in approximately one hour. If due to rotation of the nucleus, this rather high amplitude is used to derive a new value for the nuclear magnitude, m_0 ~ 6.80 mag.

  11. A ROSAT Bright Source Catalog Survey with the Swift Satellite

    CERN Document Server

    Fox, D B

    2004-01-01

    We consider the prospects for a complete survey of the 18,811 sources of the ROSAT All-Sky Survey Bright Source Catalog (BSC) with NASA's Swift gamma-ray burst (GRB) mission. By observing each BSC source for 500 s with the satellite's imaging X-ray and UV/optical telescopes, this "Swift Bright (Source) Catalog Survey" (Swift-BCS) would derive ~20 mCrab, 10-100 keV) with the wide-field Burst Alert Telescope (BAT); and a two-year all-sky BAT survey down to >~1 mCrab. The resulting expansion of the catalog of identified X-ray sources from 2000 to 18,000 will provide a greatly-enriched set of targets for observation by XMM-Newton, Chandra, and future high-energy observatories.

  12. Statics and dynamics of atomic dark-bright solitons in the presence of impurities

    Energy Technology Data Exchange (ETDEWEB)

    Achilleos, V.; Frantzeskakis, D. J. [Department of Physics, University of Athens, Panepistimiopolis, Zografos, Athens GR-157 84 (Greece); Kevrekidis, P. G. [Department of Mathematics and Statistics, University of Massachusetts, Amherst, Massachusetts 01003-4515 (United States); Rothos, V. M. [Department of Mathematics, Physics Computational Sciences, Faculty of Engineering, Aristotle University of Thessaloniki, Thessaloniki GR-54124 (Greece)

    2011-11-15

    Adopting a mean-field description for a two-component atomic Bose-Einstein condensate, we study the statics and dynamics of dark-bright solitons in the presence of localized impurities. We use adiabatic perturbation theory to derive an equation of motion for the dark-bright soliton center. We show that, counterintuitively, an attractive (repulsive) delta-like impurity, acting solely on the bright-soliton component, induces an effective localized barrier (well) in the effective potential felt by the soliton; this way, dark-bright solitons are reflected from (transmitted through) attractive (repulsive) impurities. Our analytical results for the small-amplitude oscillations of solitons are found to be in good agreement with results obtained via a Bogoliubov-de Gennes analysis and direct numerical simulations.

  13. The historical investigation of cometary brightness

    Science.gov (United States)

    Hughes, David W.

    1998-12-01

    The interpretation of the way in which the brightness of a comet varied as a function of both its heliocentric and geocentric distance was essentially started by Isaac Newton in his book Philosophiae Naturalis Principia Mathematica, published in 1687. Astronomers have argued about the form of this variability ever since, and for many years it was regarded as an important clue as to the physical nature of the cometary nucleus and its decay process. This paper reviews our understanding of the causes of cometary brightness variability between about 1680 and the 1950s.

  14. Continuous variable quantum communication with bright entangled optical beams

    Institute of Scientific and Technical Information of China (English)

    XIE Chang-de; ZHANG Jing; PAN Qing; JIA Xiao-jun; PENG Kun-chi

    2006-01-01

    In this paper,we briefly introduce the basic concepts and protocols of continuous variable quantum communication,and then summarize the experimental researches accomplished by our group in this field.The main features of quantum communication systems used in our experiments are:(1) The bright entangled optical beams with the anticorrelated amplitude quadratures and the correlated phase quadratures that serve as the entanglement resources and (2) The Bell-state direct detection systems are utilized in the measurements of quantum entanglement and transmitted signals instead of the usually balanced homodyne detectors.

  15. Completion of the Brightness Upgrade of the ALS

    Science.gov (United States)

    Steier, C.; Madur, A.; Bailey, B.; Berg, K.; Biocca, A.; Black, A.; Casey, P.; Colomb, D.; Gunion, B.; Li, N.; Marks, S.; Nishimura, H.; Pappas, C.; Petermann, K.; Portmann, G.; Prestemon, S.; Rawlins, A.; Robin, D.; Rossi, S.; Scarvie, T.; Schlueter, R.; Sun, C.; Tarawneh, H.; Wan, W.; Williams, E.; Yin, L.; Zhou, Q.; Jin, J.; Zhang, J.; Chen, C.; Wen, Y.; Wu, J.

    2014-03-01

    The Advanced Light Source (ALS) at Berkeley Lab remains one of the brightest sources for soft x-rays worldwide. A multiyear upgrade of the ALS is underway, which includes new and replacement x-ray beamlines, a replacement of many of the original insertion devices and many upgrades to the accelerator. The accelerator upgrade that affects the ALS performance most directly is the ALS brightness upgrade [1], which reduces the horizontal emittance from 6.3 to 2.0 nm (2.5 nm effective). Magnets for this upgrade were installed in late 2012 and early 2013 followed by user operation with the reduced emittance.

  16. Electrical properties of Al-In-Sn alloys directionally solidified in high and low gravitational fields

    Science.gov (United States)

    Wu, M. K.; Ashburn, J. R.; Kaukler, W. F.; Curreri, P. A.

    1987-01-01

    The Al-In-Sn alloys were directionally solidified in the NASA KC-135 aircraft which flies a series of parabolas to generate high (high-g) and low (low-g) gravity forces parallel to the longitudinal growth axis. Thus, for a given sample, successive sections can be identified which were solidified in high-g and low-g. Measurements of the electronic properties of the samples reveal that: the resistivity of the low-g sections is larger (about a factor of 10) than that of the high-g sections; the low-g sections behave conductively like a semi-metal, while the high-g sections are essentially metallic; and both high-g and low-g sections are superconducting but the superconducting transition temperature of the low-g sections is 1 K higher than that of the high-g sections.

  17. Electrical properties of Al-In-Sn alloys directionally solidified in high and low gravitational fields

    Science.gov (United States)

    Wu, M. K.; Ashburn, J. R.; Curreri, P. A.; Kaukler, W. F.

    1987-08-01

    Al-ln-Sn alloys have been directionally solidified in the NASA KC-135 aircraft which flies a series of parabolas to generate high (high-g) and low gravity (low-g) forces parallel to the longitudinal growth axis. Thus, for a given sample successive sections can be identified which were solidified in high-g and in low-g. Measurements on the electronic properties of the samples reveal that (1) the resistivity of the low-g sections is larger (about a factor of 10) than that of the high-g sections; (2) the low-g sections behave conductively like a semi-metal, while the high-g sections are essentially metallic; and (3) both high-g and low-g sections are superconducting but the superconducting transition temperature of the low-g sections is 1 K higher than that of the high-g sections.

  18. The structure of TeV-bright shell-type supernova remnants

    Science.gov (United States)

    Yang, Chuyuan; Liu, Siming; Fang, Jun; Li, Hui

    2015-01-01

    Aims: Two-dimensional magnetohydrodynamic (MHD) simulations are used to model the emission properties of TeV-bright shell-type supernova remnants (SNRs) and to explore their nature. Methods: In the leptonic scenario for the TeV emission, the γ-ray emission is produced via inverse Compton scattering of background soft photons by high-energy electrons accelerated by the shocks of the SNRs. In a previous paper, we showed that since the energy densities of the cosmic microwave background radiation and that of the IR/optical background photons are much higher than that of the photons produced by the same high-energy electrons via the synchrotron process, the observed correlation between X-ray and TeV brightness of SNR RX J1713.7-3946 can be readily explained with the assumption that the energy density of relativistic electrons is proportional to that of the magnetic field. The TeV emissivity is therefore proportional to the magnetic field energy density and MHD simulations can be used to model the TeV structure of such remnants directly. Two-dimensional MHD simulations for SNRs are then performed under the assumption that the ambient interstellar medium is turbulent with the magnetic field and density fluctuations, following a Kolmogorov-like power-law spectrum. Results: (1) As expected, these simulations confirm early 1D and 2D modelings of these sources, namely the hydrodynamical evolution of the shock waves and amplification of magnetic field by Rayleigh-Taylor convective flows and by shocks propagating in a turbulent medium; (2) we reproduce rather complex morphological structure for γ-rays, for example, the bright thin rim and significant asymmetry, suggesting intrinsic variations of the source morphology not related to the structure of the progenitor and environment; and (3) the observed radial profile of several remnants are well reproduced with an ambient medium density of 0.1-1 cm-3. An even lower ambient density leads to a sharper drop of the TeV brightness

  19. Drainage borehole with high directional accuracy using directional drilling equipment modified for the mining industry; Wasserloesungsbohrung mit hoher Zielgenauigkeit unter Einsatz einer fuer den Bergbau modifizierten Richtbohrausruestung

    Energy Technology Data Exchange (ETDEWEB)

    Wilkening, Matthias [MICON Drilling GmbH, Nienhagen (Germany)

    2009-01-29

    To carry out a drainage project it was necessary to divert water from an abandoned mine and direct it to an existing drainage system. To ensure that the borehole required for this purpose terminates accurately in a roadway a borehole meeting a high requirement on constant drilling and directional accuracy was necessary. Hence a combination of existing drilling equipment and directional drilling specifically adapted to these requirements was used. (orig.)

  20. Design of high-pressure direct contact heater for promising power supply units: Experimental substantiation

    Science.gov (United States)

    Somova, E. V.; Shvarts, A. L.; Turkin, A. V.

    2016-11-01

    The results of experimental studies of superheated steam condensation on feed water jets in a highpressure, direct-contact heat exchanger are presented. Direct contact feed water heater (DCFWH) can be used in a dual-flow diagram of a steam-power unit with ultrasupercritical steam parameters (35 MPa, 700/720°C). The direct contact feed water heater is included in the flow diagram of the II circuit in a promising power unit; it provides feed water heating to 340°C in all maintenance and emergency operation modes of the unit. The reliability of the high-pressure direct contact heater operation in this flow diagram is of major importance in relation to the danger of lead solidification in the tube space of the steam generator. Technical requirements to the design of the high-pressure direct contact heater for increasing the heat exchange efficiency are formulated based on the results of earlier studies with steam-water mixture as the heating medium. The results of studies of superheated steam condensation on jets presented in this study testify that feed water is additionally heated to the required temperature at the output of the installation. The influence of initial feed water parameters (outflow velocity and temperature) on the jet heating length is elucidated. The numerical approximation of the experimental data for determination of the jet heating length in the nominal and partial power unit loads is obtained. The results of the calculations are used to simplify the design of the water-supplying element for the direct contact feed water heater. The proposed design of direct contact feed water heater is characterized by simplicity and low metal intensity, which provides the installation reliability at the considered pressure level due to the minimum number of structural elements.

  1. On the brightness variations of Comet Halley at large heliocentric distances

    Science.gov (United States)

    Flammer, K. R.; Jackson, B.; Mendis, D. A.

    1986-01-01

    Sporadic variations of its intrinsic brightness of up to 500 percent, with time scales as short as a few hours, has been exhibited by Halley's comet at large heliocentric distances (11-8 AU). It is shown that many of these brightness enhancements are closely correlated to the encounter of high-speed solar wind streams by the comet. It is proposed that during such periods, the night side of the comet gets charged to numerically large negative electrostatic potentials, with consequent electrostatic levitation and blow-off of fine charged dust grains lying on it. This gives rise to the observed brightness variations.

  2. Design and analysis of a new high frequency double-servo direct drive rotary valve

    Science.gov (United States)

    Zhu, Muzhi; Zhao, Shengdun; Li, Jingxiang

    2016-12-01

    Researchers have investigated direct drive valve for many years to solve problems, such as fluid force imbalance and switching frequency. The structure of the rotary valve has received considerable research interest because of its favorable dynamic properties and simple structure. This paper studied the high frequency doubleservo direct drive rotary valve (DDRV), and proposed a novel structure and drive method satisfying high reversing frequency and adequate quantity of flow. Servo motors are integrated into the valve by the innovative structure, which is designed to equilibrate the unbalanced radial fluid force with the symmetric distributed oil ports. Aside from the fast reversing function of the valve, the DDRV presented high performance in linearity of the flow quantity and valve opening as a result of the fan-shaped flow ports. In addition, a computational fluid dynamics (CFD) method based on Fluent was conducted to verify the flux regulation effect of the height change of the adjustable boss.

  3. A high-contrast coronagraph for earth-like exoplanet direct imaging: design and test

    CERN Document Server

    Liu, C C; Dou, J P; Zhu, Y T; Zhang, X; Zhao, G; Wu, Zh; Chen, R

    2014-01-01

    The high-contrast coronagraph for direct imaging earth-like exoplanet at the visible needs a contrast of 10^(-10) at a small angular separation of 4 lambda/D or less. Here we report our recent laboratory experiment that is close to the limits. The test of the high-contrast imaging coronagraph is based on our step-transmission apodized filter. To achieve the goal, we use a liquid crystal array (LCA) as a phase corrector to create a dark hole based on our dedicated focal dark algorithm. We have suppressed the diffracted and speckle noise near the star point image to a level of 1.68 x 10^(-9) at 4 lambda/D, which can be immediately used for the direct imaging of Jupiter like exoplanets. This demonstrates that high-contrast coronagraph telescope in space has the potentiality to detect and characterize earth-like planets.

  4. Properties of Laser-Produced Highly Charged Heavy Ions for Direct Injection Scheme

    CERN Document Server

    Sakakibara, Kazuhiko; Hayashizaki, Noriyosu; Ito, Taku; Kashiwagi, Hirotsugu; Okamura, Masahiro

    2005-01-01

    To accelerate highly charged intense ion beam, we have developed the Direct Plasma Injection Scheme (DPIS) with laser ion source. In this scheme an ion beam from a laser ion source is injected directly to a RFQ linac without a low energy beam transport (LEBT) and the beam loss in the LEBT can be avoided. We achieved high current acceleration of carbon ions (60mA) by DPIS with the high current optimized RFQ. As the next setp we will use heavier elements like Ag, Pb, Al and Cu as target in LIS (using CO2, Nd-YAG or other laser) for DPIS and will examine properties of laser-produced plasma (the relationship of between charge state and laser power density, the current dependence of the distance from the target, etc).

  5. Mapping the low surface brightness Universe in the UV band with Lya emission from IGM filaments

    CERN Document Server

    Silva, Marta B; Zaroubi, Saleem

    2016-01-01

    A large fraction of the baryonic matter in the Universe is located in filaments in the intergalactic medium. However, the low surface brightness of these filaments has not yet allowed their direct detection except in very special regions in the circum-galactic medium (CGM). Here we simulate the intensity and spatial fluctuations in Lyman Alpha ${\\rm (Ly\\alpha)}$ emission from filaments in the intergalactic medium (IGM) and discuss the prospects for the next generation of space based instruments to detect the low surface brightness universe at UV wavelengths. Starting with a high resolution N-body simulation we obtain the dark matter density fluctuations and associate baryons with the dark matter particles assuming that they follow the same spatial distribution. The IGM thermal and ionization state is set by a model of the UV background and by the relevant cooling processes for a hydrogen and helium gas. The ${\\rm Ly\\alpha}$ emissivity is then estimated, taking into account recombination and collisional excita...

  6. High-Power Continuous-Wave Directly-Diode-Pumped Fiber Raman Lasers

    Directory of Open Access Journals (Sweden)

    Tianfu Yao

    2015-11-01

    Full Text Available We describe novel fiber Raman lasers pumped directly by spectrally combined high power multimode laser diodes at 975 nm and emitting at 1019 nm. With a commercial multimode graded-index fiber, we reached 20 W of laser output power with a record slope efficiency of 80%. With an in-house double-clad fiber, the beam quality improved to M2 = 1.9, albeit with lower output power and slope efficiency due to higher fiber loss. We believe this is the first publication of a fiber Raman laser cladding-pumped directly by diodes.

  7. IJCRIMPH and its bright prospects

    Directory of Open Access Journals (Sweden)

    Mostafa Nejati

    2010-04-01

    Full Text Available Editorial: The International Journal of Collaborative Research on Internal Medicine & Public Health (IJCRIMPH founded in March 2009 celebrates its first anniversary this year. The successful organization of 2 series of International Online Medical Conferences provided an impetus for launching the journal with the assistance of our good publisher: DRUNPP. The journal has to date published 13 issues comprising of a total of 20 articles. Despite the short tenure of the journal, it has been well received by the academic community. We are pleased to say that our authors, peer-reviewers and editorial board members come from all across the world. Besides, the journal and its published papers have been successfully indexed in established databases including (but not limited to EBSCO, EMBASE, ProQuest, DOAJ, GALE Cengage, and IndexCopernicus.Thanks to the highly-qualified and dedicated reviewers, IJCRIMPH has maintained a competitive average review process time of less than 1.5 months. Moreover, papers once accepted are published almost without any delay, helping successful authors to share their academic work with their peers in no time.IJCRIMPH ensures high quality of its standards by requiring the editorial board members and reviewers to comply with the Editorial Policy Statements that are approved by the Council of Science Editors (CSE. Moreover, the journal complies with the Uniform Requirements for Manuscripts Submitted to Biomedical Journals, issued by the International Committee for Medical Journal Editors.The objectives of International Journal of Collaborative Research on Internal Medicine & Public Health (IJCRIMPH are to promote discussions, studies, collaborative researches and activities on the current internal medicine and public health topics with an emphasis on epidemiological studies, prophylactic measures and secondary treatment methods. The journal publishes high quality editorials, research articles, reviews, book reviews, case

  8. A direct digital frequency synthesizer with high-speed current-steering DAC

    Institute of Scientific and Technical Information of China (English)

    Yu Jinshan; Fu Dongbing; Li Ruzhang; Yao Yafeng; Yan Gang; Liu Jun; Zhang Ruitao; Yu Zhou; Li Tun

    2009-01-01

    A high-speed SiGe BiCMOS direct digital frequency synthesizer (DDS) is presented. The design in tegrates a high-speed digital DDS core, a high-speed differential current-steering mode 10-bit D/A converter, a serial/parallel interface, and clock control logic. The DDS design is processed in 0.35 μm SiGe BiCMOS standard process technology and worked at 1 GHz system frequency. The measured results show that the DDS is capable of generating a frequency-agile analog output sine wave up to 400+ MHz.

  9. A photometric investigation of a bright Geminid

    NARCIS (Netherlands)

    Degewij, J.; Diggelen, Johannes van

    1968-01-01

    Photographic observations of meteors in the Netherlands started with a bright Geminid of photographic magnitude −8 observed on December 11, 1955, 21h39m55s by M. Alberts. From the assumed radiant and velocity we have constructed the trajectory of the bolide. The luminosity of the trail has been dete

  10. Probable Bright Supernova discovered by PSST

    Science.gov (United States)

    Smith, K. W.; Wright, D.; Smartt, S. J.; Young, D. R.; Huber, M.; Chambers, K. C.; Flewelling, H.; Willman, M.; Primak, N.; Schultz, A.; Gibson, B.; Magnier, E.; Waters, C.; Tonry, J.; Wainscoat, R. J.; Foley, R. J.; Jha, S. W.; Rest, A.; Scolnic, D.

    2016-09-01

    A bright transient, which is a probable supernova, has been discovered as part of the Pan-STARRS Survey for Transients (PSST). Information on all objects discovered by the Pan-STARRS Survey for Transients is available at http://star.pst.qub.ac.uk/ps1threepi/ (see Huber et al. ATel #7153).

  11. Brightness of synchrotron radiation from wigglers

    Energy Technology Data Exchange (ETDEWEB)

    Geloni, Gianluca, E-mail: gianluca.geloni@xfel.eu [European XFEL GmbH, Hamburg (Germany); Kocharyan, Vitali; Saldin, Evgeni [Deutsches Elektronen-Synchrotron (DESY), Hamburg (Germany)

    2016-01-21

    According to the literature, while calculating the brightness of synchrotron radiation from wigglers, one needs to account for the so-called ‘depth-of-field’ effects. In fact, the particle beam cross-section varies along the wiggler. It is usually stated that the effective photon source size increases accordingly, while the brightness is reduced. Here we claim that this is a misconception originating from an analysis of the wiggler source based on geometrical arguments, regarded as almost self-evident. According to electrodynamics, depth-of-field effects do not exist: we demonstrate this statement both theoretically and numerically, using a well-known first-principle computer code. This fact shows that under the usually accepted approximations, the description of the wiggler brightness turns out to be inconsistent even qualitatively. Therefore, there is a need for a well-defined procedure for computing the brightness from a wiggler source. We accomplish this task based on the use of a Wigner function formalism. We exemplify this formalism in simple limiting cases. We consider the problem of the calculation of the wiggler source size by means of numerical simulations alone, which play the same role of an experiment. We report a significant numerical disagreement between exact calculations and approximations currently used in the literature.

  12. Dark matter in low surface brightness galaxies

    NARCIS (Netherlands)

    de Blok, WJG; McGaugh, SS; Persic, M; Salucci, P

    1997-01-01

    Low Surface Brightness (LSB) galaxies form a large population of disc galaxies that extend the Hubble sequence towards extreme late-types. They are only slowly evolving, and still in an early evolutionary state. The Tully-Fisher relation and rotation curves of LSB galaxies both show that LSB

  13. Alberta Associations for Bright Children Members' Handbook.

    Science.gov (United States)

    Alberta Association for Bright Children, Edmonton.

    This handbook is designed to provide information to parents of gifted children in Alberta, Canada. The handbook outlines the mission and objectives of the Alberta Associations for Bright Children and describes the structure of the non-profit organization. The booklet then addresses: (1) the characteristics of gifted children; (2) the rights of…

  14. Brightness of synchrotron radiation from wigglers

    Science.gov (United States)

    Geloni, Gianluca; Kocharyan, Vitali; Saldin, Evgeni

    2016-01-01

    According to the literature, while calculating the brightness of synchrotron radiation from wigglers, one needs to account for the so-called 'depth-of-field' effects. In fact, the particle beam cross-section varies along the wiggler. It is usually stated that the effective photon source size increases accordingly, while the brightness is reduced. Here we claim that this is a misconception originating from an analysis of the wiggler source based on geometrical arguments, regarded as almost self-evident. According to electrodynamics, depth-of-field effects do not exist: we demonstrate this statement both theoretically and numerically, using a well-known first-principle computer code. This fact shows that under the usually accepted approximations, the description of the wiggler brightness turns out to be inconsistent even qualitatively. Therefore, there is a need for a well-defined procedure for computing the brightness from a wiggler source. We accomplish this task based on the use of a Wigner function formalism. We exemplify this formalism in simple limiting cases. We consider the problem of the calculation of the wiggler source size by means of numerical simulations alone, which play the same role of an experiment. We report a significant numerical disagreement between exact calculations and approximations currently used in the literature.

  15. Robust fitting of diurnal brightness temperature cycle

    CSIR Research Space (South Africa)

    Udahemuka, G

    2007-11-01

    Full Text Available for a pixel concerned. Robust fitting of observed Diurnal Temperature Cycle (DTC) taken over a day of a given pixel without cloud cover and other abnormally conditions such as fire can give a data based brightness temperature model for a given pixel...

  16. Bright Future for Petroleum Development Cooperation

    Institute of Scientific and Technical Information of China (English)

    Zhang Zhenqing

    1996-01-01

    @@ China's oil prospects look bright, since reform and opening speed up. The oil production of 1995 is 148 million tons and the confirmed reserves of oil and gas only occupy one-fifth of those possible to be verified, the petroleum exploration will be deepened to locate and confirm the remaining reserves.

  17. TIGER Burned Brightly in JAMIC

    Science.gov (United States)

    Olson, Sandra L.; Kashiwagi, Takashi

    2001-01-01

    The Transition From Ignition to Flame Growth Under External Radiation in 3D (TIGER- 3D) experiment, which is slated to fly aboard the International Space Station, conducted a series of highly successful tests in collaboration with the University of Hokkaido using Japan's 10-sec JAMIC drop tower. The tests were conducted to test engineering versions of advanced flight diagnostics such as an infrared camera for detailed surface temperature measurements and an infrared spectroscopic array for gas-phase species concentrations and temperatures based on detailed spectral emissions in the near infrared. Shown in the top figure is a visible light image and in the bottom figure is an infrared image at 3.8 mm obtained during the microgravity tests. The images show flames burning across cellulose samples against a slow wind of a few centimeters per second (wind is from right to left). These flow velocities are typical of spacecraft ventilation systems that provide fresh air for the astronauts. The samples are ignited across the center with a hot wire, and the flame is allowed to spread upwind and/or downwind. As these images show, the flames prefer to spread upwind, into the fresh air, which is the exact opposite of flames on Earth, which spread much faster downwind, or with the airflow, as in forest fires.

  18. High-performance cryogenic fractal 180° hybrid power divider with integrated directional coupler

    Science.gov (United States)

    Ladu, Adelaide; Montisci, Giorgio; Valente, Giuseppe; Navarrini, Alessandro; Marongiu, Pasqualino; Pisanu, Tonino; Mazzarella, Giuseppe

    2017-06-01

    A 180° hybrid and a directional coupler to be employed in the P-band cryogenic receiver of the Sardinia Radio Telescope are proposed in this work. An in-depth study of the issues related to the use of microwave components for cryogenic radio astronomy receivers is carried out to select the best suited technology and configuration. As a result, a planar fractal 180° hybrid configuration available in the literature has been optimized aiming to increase the operating bandwidth in order to comply with the design specifications of the application at hand. A coupled line directional coupler with weak coupling and high isolation, used to calibrate the receiver chain, is cascaded to the 180° hybrid and realized in the same layout. The final device, consisting of the 180° hybrid and the directional coupler, has been manufactured and tested at the cryogenic temperature of 20 K, showing a good agreement between experimental results and predicted performance.

  19. Highly directional bottom-up 3D nanoantenna for visible light.

    Science.gov (United States)

    Tong, L; Pakizeh, T; Feuz, L; Dmitriev, A

    2013-01-01

    Controlling light at the nanoscale is of fundamental importance and is essential for applications ranging from optical sensing and metrology to information processing, communications, and quantum optics. Considerable efforts are currently directed towards optical nanoantennas that directionally convert light into strongly localized energy and vice versa. Here we present highly directional 3D nanoantenna operating with visible light. We demonstrate a simple bottom-up approach to produce macroscopic arrays of such nanoantennas and present a way to address their functionality via interaction with quantum dots (QDs), properly embedded in the structure of the nanoantenna. The ease and accessibility of this structurally robust optical antenna device prompts its use as an affordable test bed for concepts in nano-optics and nanophotonics applications.

  20. An All-Sky Catalog of Bright M Dwarfs

    CERN Document Server

    Lépine, Sébastien

    2011-01-01

    We present an all-sky catalog of M dwarf stars with apparent infrared magnitude J40 mas/yr, supplemented on the bright end with the TYCHO-2 catalog. Completeness tests which account for kinematic (proper motion) bias suggest that our catalog represents ~75% of the estimated ~11,900 M dwarfs with J<10 expected to populate the entire sky. Our catalog is, however, significantly more complete for the Northern sky (~90%) than it is for the South (~60%). Stars are identified as cool, red M dwarfs from a combination of optical and infrared color cuts, and are distinguished from background M giants and highly-reddened stars using either existing parallax measurements or, if such measurements are lacking, on their location in an optical-to-infrared reduced proper motion diagram. These bright M dwarfs are all prime targets for exoplanet surveys using the Doppler radial velocity or transit methods; the combination of low-mass and bright apparent magnitude should make possible the detection of Earth-size planets on sh...