WorldWideScience

Sample records for high beta advanced

  1. Advanced operation scenarios toward high-beta, steady-state plasmas in KSTAR

    Science.gov (United States)

    Yoon, Si-Woo; Jeon, Y. M.; Woo, M. H.; Bae, Y. S.; Kim, H. S.; Oh, Y. K.; Park, J. M.; Park, Y. S.; Kstar Team

    2016-10-01

    For the realization of the fusion reactor, solving issues for high-beta steady-state operation is one of the essential topics for the present superconducting tokamaks and in this regard, KSTAR has been focusing on maximizing performance and increasing pulse length simultaneously. Typically, study on high beta operation has been focusing on advanced scenario limited at relatively short pulse discharge and partial success has been reported previously. However, it must be stressed that it is critical to verify compatibility of the developed scenario to long-pulse operation and compared with that of the short-pulse, it is turned out stable long-pulse operation is possible only with a reduced level of beta. In this work, the results of recent approaches in long-pulse operation are presented focusing respectively on high betaN, high betap and high li scenarios. For high betaN, the achieved level is close to 3 with Ip =0.4 MA, BT =1.4T and Pext 6MW and it is found to be limited by m/n =2/1 tearing mode and is also sensitive on the internal inductance. For high betap, conditions of the maximum betap is investigated mainly by parametric scans of plasma current (Ip =0.4-0.7 MA) and also neutral beam injection power (3-5MW). The achieved betap is also close to 3 with Ip =0.4 MA, BT =2.9T and Pext 6MW and it is found to be limited by heating power and without indication of MHD activities. Finally, attempt for high li discharge will be addressed on scenario development and transient results.

  2. Neoclassical transport in high [beta] tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, S.C.

    1992-12-01

    Neoclassical, transport in high [beta] large aspect ratio tokamaks is calculated. The variational method introduced by Rosenbluth, et al., is used to calculate the full Onsager matrix in the banana regime. These results are part of a continuing study of the high [beta] large aspect ratio equilibria introduced in Cowley, et al. All the neoclassical coefficients are reduced from their nominal low [beta] values by a factor ([var epsilon]/q[sup 2][beta])[sup [1/2

  3. Sawtooth crashes at high beta on JET

    Energy Technology Data Exchange (ETDEWEB)

    Alper, B.; Huysmans, G.T.A.; Sips, A.C.C. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Nave, M.F.F. [Universidade Tecnica, Lisbon (Portugal). Inst. Superior Tecnico

    1994-07-01

    The sawtooth crashes on JET display features which depend on beta. The main observation is a transient bulging of flux surfaces (duration inferior to 30 microsec.), which is predominantly on the low field side and extends to larger radii as beta increases. This phenomenon reaches the plasma boundary when beta{sub N} exceeds 0.5 and in these cases is followed by an ELM within 50 microsec. These sawtooth/ELM events limit plasma performance. Modelling of mode coupling shows qualitative agreement between observations of the structure of the sawtooth precursor and the calculated internal kink mode at high beta. (authors). 6 refs., 5 figs.

  4. Neoclassical transport in high {beta} tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Cowley, S.C.

    1992-12-01

    Neoclassical, transport in high {beta} large aspect ratio tokamaks is calculated. The variational method introduced by Rosenbluth, et al., is used to calculate the full Onsager matrix in the banana regime. These results are part of a continuing study of the high {beta} large aspect ratio equilibria introduced in Cowley, et al. All the neoclassical coefficients are reduced from their nominal low {beta} values by a factor ({var_epsilon}/q{sup 2}{beta}){sup {1/2}} II. This factor is the ratio of plasma volume in the boundary layer to the volume in the core. The fraction of trapped particles on a given flux surface (f{sub t}) is also reduced by this factor so that {approximately} {sub ({var_epsilon}}/q{sup 2}{beta}){sup {1/2}}. Special attention is given to the current equation, since this is thought to be relevant at low 3 and therefore may also be relevant at high {beta}. The bootstrap current term is found to exceed the actual current by a factor of the square root of the aspect ratio.

  5. High harmonic fast waves in high beta plasmas

    Energy Technology Data Exchange (ETDEWEB)

    Ono, Masayuki

    1995-04-01

    High harmonic fast magnetosonic wave in high beta/high dielectric plasmas is investigated. including the finite-Larmor-radius effects. In this regime, due to the combination of group velocity slow down and the high beta enhancement, the electron absorption via electron Landau and electron magnetic pumping becomes significant enough that one can expect a strong ({approximately} 100%) single pass absorption. By controlling the wave spectrum, the prospect of some localized electron heating and current drive appears to be feasible in high beta low-aspect-ratio tokamak regimes. Inclusion of finite-Larmor-radius terms shows an accessibility limit in the high ion beta regime ({beta}{sub i} = 50% for a deuterium plasma) due to mode-conversion into an ion Bernstein-wave-like mode while no beta limit is expected for electrons. With increasing ion beta, the ion damping can increase significantly particularly near the beta limits. The presence of energetic ion component expected during intense NBI and {alpha}-heating does not appear to modify the accessibility condition nor cause excessive wave absorption.

  6. High-{beta} disruption in tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Park, W.; Fredrickson, E.D.; Janos, A. [and others

    1995-07-01

    Three dimensional MHD simulations of high-{beta} plasmas show that toroidally localized high-n ballooning modes can be driven unstable by the local pressure steepening which arises from the evolution of low-n modes. Nonlinearly, the high-n mode becomes even more localized and produces a strong local pressure bulge which destroys the flux surfaces resulting in a thermal quench. The flux surfaces then recover temporarily but now contain large magnetic islands. This scenario is supported by experimental data.

  7. La diversidad beta: medio siglo de avances Beta diversity: half a century of advances

    Directory of Open Access Journals (Sweden)

    Jaime M. Calderón-Patrón

    2012-09-01

    Full Text Available Se presenta una revisión de las principales tendencias que el estudio de la diversidad beta ha tenido a lo largo de más de 50 años, a partir de la propuesta del concepto y hasta las revisiones del tema realizadas recientemente. Es notable el incremento de publicaciones, en especial en la última década, donde se discuten y proponen sus métodos de análisis, aproximaciones de estudio, así como los conceptos y fenómenos biológicos relacionados. Este fructífero trabajo en la generación de ideas y conocimientos ha provocado un cambio importante en la conceptualización y en la forma de apreciar y analizar la diversidad beta, dando lugar a un marco de trabajo renovado y fresco, con un enorme potencial de aplicación en ecología, biogeografía y biología de la conservación.We review the main advances that the study of beta diversity has had for over 50 years, since its proposal and until the latest reviews. The increase in the number of publications is remarkable, especially in the last decade, and in these papers many authors discuss and propose methods for analysis, research approaches, as well as basic concepts and related biological phenomena. This fruitful task in the generation of ideas and knowledge has radically changed the ways in which beta diversity is conceptualized, appreciated, and analyzed, resulting in a renovated and fresh framework, with an enormous potential for application in ecology, biogeography, and conservation biology.

  8. High beta and confinement studies on TFTR

    Energy Technology Data Exchange (ETDEWEB)

    Navratil, G.A.; Bhattacharjee, A.; Iacono, R.; Mauel, M.E.; Sabbagh, S.A. (Columbia Univ., New York, NY (United States)); Kesner, J. (Massachusetts Inst. of Tech., Cambridge, MA (United States))

    1992-01-01

    A new regime of high poloidal beta operation in TFTR was developed in the course of the first two years of this project (9/25/89 to 9/24/91). Our proposal to continue this successful collaboration between Columbia University and the Massachusetts Institute of Technology with the Princeton Plasma Physics Laboratory for a three year period (9/25/91 to 9/24/94) to continue to investigate improved confinement and tokamak performance in high poloidal beta plasmas in TFTR through the DT phase of operation was approved by the DOE and this is a report of our progress during the first 9 month budget period of the three year grant (9/25/91 to 6/24/92). During the approved three year project period we plan to (1) extend and apply the low current, high QDD discharges to the operation of TFTR using Deuterium and Tritium plasma; (2) continue the analysis and plan experiments on high poloidal beta phenomena in TFTR including: stability properties, enhanced global confinement, local transport, bootstrap current, and divertor formation; (3) plan and carry out experiments on TFTR which attempt to elevate the central q to values > 2 where entry to the second stability regime is predicted to occur; and (4) collaborate on high beta experiments using bean-shaped plasmas with a stabilizing conducting shell in PBX-M. In the seven month period covered by this report we have made progress in each of these four areas through the submission of 4 TFTR Experimental Proposals and the partial execution of 3 of these using a total of 4.5 run days during the August 1991 to February 1992 run.

  9. MEASURING BETA FUNCTION AND PHASE ADVANCE IN RHIC WITH AN AC DIPOLE.

    Energy Technology Data Exchange (ETDEWEB)

    BAI,M.PEGGS,S.ROSER,T.SATOGATA,T.

    2003-05-12

    High energy hadron collider operation requires accurate measurements of the beta functions and phase advances, to check the linear optics and to locate gradient errors. During the RHIC 2003 run, two AC dipoles with vertical and horizontal magnetic field [1] were used to measure the linear optics at storage and at injection energies. The two AC dipoles are set up to adiabatically induce sizable coherent oscillations at a frequency close to the betatron frequencies. The beta functions and phase advances are then calculated from the 1024 turn-by-turn measurements available from all the RHIC BPMs (Beam Position Monitors). Because the coherent excitation is adiabatic, the beam emittance is preserved after the measurement. The algorithm is discussed in this paper, and experimental results are presented.

  10. Anticorrosion Nanocrystalline Beta Zeolite Thin Film for Advanced Applications

    Directory of Open Access Journals (Sweden)

    Maha Saud M. Al-subaie

    2015-01-01

    Full Text Available Steel alloys corrosion is ubiquitous and is conventionally protected by anticorrosion chromate coatings. However, the process suffers from the release of carcinogenic hexavalent chromium ions that needs to be replaced by an ecofriendly alternative. In this context, the need for the development of satisfactory ecofriendly chromium-free coating with superior corrosion performance is highly desirable. In the present study, we synthesized fully dispersible nanocrystalline Beta zeolite seeds and coated on steel alloys followed by steaming. The samples were characterized by XRD, FE-SEM, and DLS analyses. The anticorrosion behavior of the synthesized nanoparticle coatings on steel alloys was investigated by electrochemical measurements (DC polarization and electrochemical impedance spectroscopy (EIS in NaCl and acid and alkaline media under identical experimental conditions. The present study demonstrated that the nanozeolite coating can be a potential alternative for toxic and carcinogenic chromate coating.

  11. Advances in high temperature chemistry

    CERN Document Server

    Eyring, Leroy

    1969-01-01

    Advances in High Temperature Chemistry, Volume 2 covers the advances in the knowledge of the high temperature behavior of materials and the complex and unfamiliar characteristics of matter at high temperature. The book discusses the dissociation energies and free energy functions of gaseous monoxides; the matrix-isolation technique applied to high temperature molecules; and the main features, the techniques for the production, detection, and diagnosis, and the applications of molecular beams in high temperatures. The text also describes the chemical research in streaming thermal plasmas, as w

  12. AE activity during transient beta drops in high poloidal beta discharges

    Science.gov (United States)

    Huang, J.; Gong, X. Z.; Ren, Q. L.; Ding, S. Y.; Qian, J. P.; Pan, C. K.; Li, G. Q.; Heidbrink, W. W.; Garofalo, A. M.; McClenaghan, J.

    2016-10-01

    Enhanced AE activity has been observed during transient beta drops in high poloidal beta DIII-D discharges with internal transport barriers (ITBs). These drops in beta are believed to be caused by n=1 external kink modes. In some discharges, beta recovers within 200 ms but, in others, beta stays suppressed. A typical discharge has βP 3, qmin 3, and q95 12. The drop in beta affects both fast ions and thermal particles, and a drop is also observed in the density and rotation. The enhanced AE activity follows the instability that causes the beta drop, is largest at the lowest beta, and subsides as beta recovers. MHD stability analysis is planned. A database study of the plasma conditions associated with the collapse will be also presented. Supported in part by the US Department of Energy under DE-FC02-04ER54698, DE-AC05-06OR23100, and by the National Natural Science Foundation of China 11575249, and the National Magnetic Confinement Fusion Program of China No. 2015GB110005.

  13. Intake of antioxidant vitamins and trace elements during pregnancy and risk of advanced beta cell autoimmunity in the child.

    Science.gov (United States)

    Uusitalo, Liisa; Kenward, Mike G; Virtanen, Suvi M; Uusitalo, Ulla; Nevalainen, Jaakko; Niinistö, Sari; Kronberg-Kippilä, Carina; Ovaskainen, Marja-Leena; Marjamäki, Liisa; Simell, Olli; Ilonen, Jorma; Veijola, Riitta; Knip, Mikael

    2008-08-01

    Type 1 diabetes may have its origins in the fetal period of life. Free radicals were implicated in the cause of type 1 diabetes. It was hypothesized that antioxidant nutrients could protect against type 1 diabetes. We assessed whether high maternal intake of selected dietary antioxidants during pregnancy is associated with a reduced risk of advanced beta cell autoimmunity in the child, defined as repeated positivity for islet cell antibodies plus >/=1 other antibody, overt type 1 diabetes, or both. The study was carried out as part of the population-based birth cohort of the Type 1 Diabetes Prediction and Prevention Project. The data comprised 4297 children with increased genetic susceptibility to type 1 diabetes, born at the University Hospital of Oulu or Tampere, Finland, between October 1997 and December 2002. The children were monitored for diabetes-associated autoantibodies from samples obtained at 3-12-mo intervals. Maternal antioxidant intake during pregnancy was assessed postnatally with a self-administered food-frequency questionnaire, which contained a question about consumption of dietary supplements. Maternal intake of none of the studied antioxidant nutrients showed association with the risk of advanced beta cell autoimmunity in the child. The hazard ratios, indicating the change in risk per a 2-fold increase in the intake of each antioxidant, were nonsignificant and close to 1. High maternal intake of retinol, beta-carotene, vitamin C, vitamin E, selenium, zinc, or manganese does not protect the child from development of advanced beta cell autoimmunity in early childhood.

  14. Development of high $\\beta^*$-optics for ALICE

    CERN Document Server

    Hermes, Pascal Dominik; Wessels, Johannes Peter

    This thesis describes a feasibility study for a special optical configuration in Insertion Region 2 (IR2) of the Large Hadron Collider (LHC), which is host of the ALICE detector. This configuration allows the study of elastic and diffractive scattering during LHC high-intensity proton operation, in parallel to the nominal physics studies in all LHC experiments at the design energy of 7 TeV per beam. Such measurements require the instal- lation of additional Roman Pot (RP) detectors in the very forward region, at longitudinal distances of 150 m to 220 m from the Interaction Point (IP). Apart from being adjusted for a specific betatron phase advance between the IP and the RP detectors, such a configuration must be optimized for the largest possible $\\beta^*$ -value, to be sensitive for the smallest possible four-momentum transfer $|t|$. A value of $\\beta^*$ = 18 m is compatible with a bunch spacing of 25 ns, considering the LHC design emittance of N = 3.75 μm rad, and a required bunch-bunch separation of $12 \\...

  15. Recent advances in neutrinoless double beta decay search

    CERN Document Server

    Miramonti, L; Miramonti, Lino; Reseghetti, Franco

    2004-01-01

    Even after the discovery of neutrino flavour oscillations, based on data from atmospheric, solar, reactor, and accelerator experiments, many characteristics of the neutrino remain unknown. Only the neutrino square-mass differences and the mixing angle values have been estimated, while the value of each mass eigenstate still hasn't. Its nature (massive Majorana or Dirac particle) is still escaping. Neutrinoless double beta decay ($0\

  16. Deuterium-tritium TFTR plasmas in the high poloidal beta regime

    Energy Technology Data Exchange (ETDEWEB)

    Sabbagh, S.A.; Mauel, M.E.; Navratil, G.A. [Columbia Univ., New York, NY (United States). Dept. of Applied Physics] [and others

    1995-03-01

    Deuterium-tritium plasmas with enhanced energy confinement and stability have been produced in the high poloidal beta, advanced tokamak regime in TFTR. Confinement enhancement H {triple_bond} {tau}{sub E}/{tau}{sub E ITER-89P} > 4 has been obtained in a limiter H-mode configuration at moderate plasma current I{sub p} = 0.85 {minus} 1.46 MA. By peaking the plasma current profile, {beta}{sub N dia} {triple_bond} 10{sup 8} < {beta}{sub t{perpendicular}} > aB{sub 0}/I{sub p} = 3 has been obtained in these plasma,s exceeding the {beta}{sub N} limit for TFTR plasmas with lower internal inductance, l{sub i}. Fusion power exceeding 6.7 MW with a fusion power gain Q{sub DT} = 0.22 has been produced with reduced alpha particle first orbit loss provided by the increased l{sub i}.

  17. On the Demand for High-Beta Stocks

    DEFF Research Database (Denmark)

    Christoffersen, Susan E. K.; Simutin, Mikhail

    2017-01-01

    Prior studies have documented that pension plan sponsors often monitor a fund’s performance relative to a benchmark. We use a first-difference approach to show that in an effort to beat benchmarks, fund managers controlling large pension assets tend to increase their exposure to high-beta stocks......, while aiming to maintain tracking errors around the benchmark. The findings support theoretical conjectures that benchmarking can lead managers to tilt their portfolio toward high-beta stocks and away from low-beta stocks, which can reinforce observed pricing anomalies....

  18. High energy beta rays and vectors of Bilharzia and Fasciola

    Energy Technology Data Exchange (ETDEWEB)

    Fletcher, J.J.; Akpa, T.C.; Dim, L.A.; Ogunsusi, R.

    1988-01-01

    Preliminary investigations of the effects of high energy beta rays on Lymnea natalensis, the snail vector of Schistosoma haematobium have been conducted. Results show that in both stream and tap water, about 70% of the snails die when irradiated for up to 18 hours using a 15m Ci Sr-90 beta source. The rest of the snails die without further irradiation in 24 hours. It may then be possible to control the vectors of Bilharzia and Fasciola by using both the direct and indirect effects of high energy betas.

  19. Development and application of nonflammable, high-temperature beta fibers

    Science.gov (United States)

    Dawn, Frederic S.

    1989-01-01

    Recent advances in fiber technology have contributed to the success of the U.S. space program. The inorganic fiber Beta, developed as a result of efforts begun in the early 1960's and heightened following the January 27, 1967 Apollo fire is unique among inorganic and organic fibers. It has been developed into woven, nonwoven, knitted, braided, coated and printed structures. All of these were used extensively for the Apollo, Skylab, Apollo-Soyuz test project, space shuttle, Spacelab, and satellite programs. In addition to being used successfully in the space program, Beta fibers are being used commercially as firesafe fabrics in homes, hospitals, institutions, public buildings, aircraft, and public transportation, wherever total nonflammability is required. One of the most unique applications of the Beta composite structure is the roofing material for the 80,000-seat Detroit Lion's Silverdome and 5 square miles of the Jeddah International Airport in Saudi Arabia. This fiber has been successfully incorporated into 165 major public construction projects around the globe. The United States alone has used more than 12 million square yards of the material. Beta fiber has been used successfully to date and has a promising future with unlimited potential for both space and commercial application. Efforts are currently underway to improve Beta fiber to meet the requirements of extended service life for the Space Station Freedom, lunar outpost, and Mars exploration missions.

  20. Beta Test Plan for Advanced Inverters Interconnecting Distributed Resources with Electric Power Systems

    Energy Technology Data Exchange (ETDEWEB)

    Hoke, A.; Chakraborty, S.; Basso, T.; Coddington, M.

    2014-01-01

    This document provides a preliminary (beta) test plan for grid interconnection systems of advanced inverter-based DERs. It follows the format and methodology/approach established by IEEE Std 1547.1, while incorporating: 1. Upgraded tests for responses to abnormal voltage and frequency, and also including ride-through. 2. A newly developed test for voltage regulation, including dynamic response testing. 3. Modified tests for unintentional islanding, open phase, and harmonics to include testing with the advanced voltage and frequency response functions enabled. Two advanced inverters, one single-phase and one three-phase, were tested under the beta test plan. These tests confirmed the importance of including tests for inverter dynamic response, which varies widely from one inverter to the next.

  1. Blockade of PKC-beta protects HUVEC from advanced glycation end products induced inflammation.

    Science.gov (United States)

    Xu, Youhua; Wang, Shanshan; Feng, Liang; Zhu, Quan; Xiang, Ping; He, Bao

    2010-12-01

    Advanced glycation end products (AGEs) have been recognized as a pivotal inducer in diabetes and kinds of aging-related vasculopathy. Endothelial dysfunction and inflammatory cells adhesion to endothelium have been regarded as important and early factors in the pathogenesis of vascular complications in diabetic patients. Owing to the key role of PKC-beta in AGEs-induced vascular dysfunction, we investigated effects of blocking PKC-beta by LY333531 on macrophage adhesion to HUVEC and the related mechanism. Transwell HUVEC-macrophage co-culture system was established to evaluate macrophage migration and adhesion ability. Immunocytochemistry was applied to examine TGF-beta1, ICAM-1 and RAGE protein expressions by SABC or SABC-AP method; mRNA expression of TGF-beta1, ICAM-1 and RAGE was determined by real-time RT-PCR. SOD and MDA levels in culture supernatant were detected. We found that LY333531 significantly reduced AGEs-induced macrophage adhesion to HUVEC. Blockade of PKC-beta strikingly decreased HUVEC TGF-beta1 and ICAM-1 expression in both protein and mRNA levels, RAGE protein level was also down-regulated. Furthermore, the anti-oxidative stress index, SOD/MDA was dramatically elevated on LY333531 application. Therefore we conclude that LY333531 can reduce AGEs-induced macrophage adhesion to endothelial cells and relieve the local inflammation, this was realized by its effect on decreasing inflammatory cytokines' expression and increasing cell anti-oxidative ability.

  2. Ideal MHD stability of very high beta tokamaks

    Energy Technology Data Exchange (ETDEWEB)

    Chance, M.S.; Jardin, S.C.; Kessel, C.; Manickam, J.; Monticello, D. (Princeton Univ., NJ (USA). Plasma Physics Lab.); Peng, Y.K.M.; Holmes, J.A.; Strickler, D.J.; Whitson, J.C. (Oak Ridge National Lab., TN (USA)); Glasser, A.H. (Los Alamos National Lab., NM (USA)); Sykes, A. (UKAEA Culham Lab., Abingdon (UK)); Ramos, J.J. (Massachusetts Inst. of Tech., Cambridge, MA (USA). Plasma Fusion Center)

    1990-12-01

    Achieving very high {beta} and high {beta}{sub p} simultaneously in tokamaks generally implies that the second stability region against ballooning modes must be accessed. We describe several approaches for doing this, which are characterized by the choice of constraints imposed on the equilibrium profiles and the cross-sectional shape of the plasma. The combination of high toroidal beta, restricting the current density to vanish at the edge of the plasma and maintaining a monotonic q profile, proves to be the most stringent. Consideration of equilibria with high {epsilon}{beta}{sub p} but low {beta} facilitates accessibility with peaked pressure profiles and high values of q{sub 0}. Allowing the pressure gradient and, hence, the current density to be finite at the plasma edge allows all surfaces to lie within the second stability regime. For free boundary plasmas with divertors, the divertor stabilized edge region remains in the first stability regime while the plasma core reaches into the second regime. Careful tailoring of the profiles must be used to traverse the unstable barrier commonly seen near the edge of these plasmas. The CAMINO code allows us to compute s-{alpha} curves for general tokamak geometry. These diagrams enable us to construct equilibria whose profiles are only constrained, at worst, to be marginally stable everywhere, but do not necessarily satisfy the constraints on the current or {beta}. There are theoretical indications that under certain conditions the external kinks possess a second region of stability at high q{sub 0} that is analogous to that of the ballooning modes. It is found that extremely accurate numerical means must be developed and applied to confidently establish the validity of these results. 14 refs., 5 figs., 1 tab.

  3. High strength beta titanium alloys: New design approach

    Energy Technology Data Exchange (ETDEWEB)

    Okulov, I.V., E-mail: okulovilya@yandex.ru [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); TU Dresden, Institut für Werkstoffwissenschaft, D-01062 Dresden (Germany); Wendrock, H. [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); Volegov, A.S. [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); Institute of Natural Sciences, Ural Federal University, 620000 Ekaterinburg (Russian Federation); Attar, H. [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); School of Engineering, Edith Cowan University, 270 Joondalup Drive, Joondalup, Perth, WA 6027 (Australia); Kühn, U. [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); Skrotzki, W. [TU Dresden, Institut für Strukturphysik, D-01062 Dresden (Germany); Eckert, J. [IFW Dresden, Helmholtzstr. 20, D-01069 Dresden (Germany); TU Dresden, Institut für Werkstoffwissenschaft, D-01062 Dresden (Germany)

    2015-03-25

    A novel approach for development of high strength and ductile beta titanium alloys was proposed and successfully applied. The microstructure of the designed alloys is fully composed of a bcc β-Ti phase exhibiting dendritic morphology. The new Ti{sub 68.8}Nb{sub 13.6}Cr{sub 5.1}Co{sub 6}Al{sub 6.5} (at%) alloy (BETA{sup tough} alloy) exhibits a maximum tensile strength of 1290±50 MPa along with 21±3% of fracture strain. The specific energy absorption value upon mechanical deformation of the BETA{sup tough} alloy exceeds that of Ti-based metallic glass composites and commercial high strength Ti-based alloys. The deformation behavior of the new alloys was correlated with their microstructure by means of in-situ studies of the microstructure evolution upon tensile loading in a scanning electron microscope.

  4. NEW ADVANCES IN BETA-BLOCKER THERAPY IN HEART FAILURE

    Directory of Open Access Journals (Sweden)

    Vincenzo eBarrese

    2013-11-01

    Full Text Available The use of -blockers (BB in heart failure (HF has been considered a contradiction for many years. Considering HF simply as a state of inadequate systolic function, BB were contraindicated because of their negative effects on myocardial contractility. Nevertheless, evidence collected in the past years have suggested that additional mechanisms, such as compensatory neuro-humoral hyperactivation or inflammation, could participate in the pathogenesis of this complex disease. Indeed, chronic activation of the sympathetic nervous system, although initially compensating the reduced cardiac output from the failing heart, increases myocardial oxygen demand, ischemia and oxidative stress; moreover, high catecholamine levels induce peripheral vasoconstriction and increase both cardiac pre- and after-load, thus determining additional stress to the cardiac muscle (1. As a consequence of such a different view of the pathogenic mechanisms of HF, the efficacy of BB in the treatment of HF has been investigated in numerous clinical trials. Results from these trials highlighted BB as valid therapeutic tools in HF, providing rational basis for their inclusion in many HF treatment guidelines. However, controversy still exists about their use, in particular with regards to the selection of specific molecules, since BB differ in terms of adrenergic -receptors selectivity, adjunctive effects on -receptors, and effects on reactive oxygen species and inflammatory cytokines production. Further concerns about the heterogeneity in the response to , as well as the use in specific patients, are matter of debate among clinicians. In this review, we will recapitulate the pharmacological properties and the classification of BB, and the alteration of the adrenergic system occurring during HF that provide a rationale for their use; we will also focus on the possible molecular mechanisms, such as genetic polymorphisms, underlying the different efficacy of molecules

  5. Dynamic Hysteresis Probes High-{\\beta} Nanolaser Emission Regimes

    CERN Document Server

    Pan, Si Hui; Amili, Abdelkrim El; Vallini, Felipe; Fainman, Yeshaiahu

    2016-01-01

    The quest for an integrated light source that promises high energy efficiency and fast modulation for high-performance photonic circuits has led to the development of room-temperature telecom-wavelength nanoscale laser with high spontaneous emission factors, \\beta. The coherence characterization of this type of lasers is inherently difficult with the conventional measurement of output light intensity versus input pump intensity due to the diminishing kink in the measurement curve. We demonstrate the transition from chaotic to coherent emission of a high-{\\beta} pulse-pump metallo-dielectric nanolaser can be determined by examining the width of a second order intensity correlation peak, which shrinks below and broadens above threshold. Photon fluctuation study, first one ever reported for this type of nanolaser, confirms the validity of this measurement technique. Additionally, we show that the width variation above threshold results from the delayed threshold phenomenon, providing the first indirect observati...

  6. Cell and Gene Therapy for the Beta-Thalassemias: Advances and Prospects.

    Science.gov (United States)

    Mansilla-Soto, Jorge; Riviere, Isabelle; Boulad, Farid; Sadelain, Michel

    2016-04-01

    The beta-thalassemias are inherited anemias caused by mutations that severely reduce or abolish expression of the beta-globin gene. Like sickle cell disease, a related beta-globin gene disorder, they are ideal candidates for performing a genetic correction in patient hematopoietic stem cells (HSCs). The most advanced approach utilizes complex lentiviral vectors encoding the human β-globin gene, as first reported by May et al. in 2000. Considerable progress toward the clinical implementation of this approach has been made in the past five years, based on effective CD34+ cell mobilization and improved lentiviral vector manufacturing. Four trials have been initiated in the United States and Europe. Of 16 evaluable subjects, 6 have achieved transfusion independence. One of them developed a durable clonal expansion, which regressed after several years without transformation. Although globin lentiviral vectors have so far proven to be safe, this occurrence suggests that powerful insulators with robust enhancer-blocking activity will further enhance this approach. The combined discovery of Bcl11a-mediated γ-globin gene silencing and advances in gene editing are the foundations for another gene therapy approach, which aims to reactivate fetal hemoglobin (HbF) production. Its clinical translation will hinge on the safety and efficiency of gene targeting in true HSCs and the induction of sufficient levels of HbF to achieve transfusion independence. Altogether, the progress achieved over the past 15 years bodes well for finding a genetic cure for severe globin disorders in the next decade.

  7. Electromagnetic gyrokinetic turbulence in high-beta helical plasmas

    Science.gov (United States)

    Ishizawa, Akihiro

    2013-10-01

    Gyrokinetic simulation of electromagnetic turbulence in finite-beta plasmas is important for predicting the performance of fusion reactors. Whereas in low-beta tokamaks the zonal flow shear acts to regulate ion temperature gradient (ITG) driven turbulence, it has often been observed that the kinetic ballooning mode (KBM) and, at moderate-beta, the ITG mode continue to grow without reaching a physically relevant level of saturation. The corresponding problem in helical high-beta plasmas, the identification of a saturation mechanism for microturbulence in regimes where zonal flow generation is too weak, is the subject of the present work. This problem has not been previously explored because of numerical difficulties associated with complex three-dimensional magnetic structures as well as multiple spatio-temporal scales related to electromagnetic ion and electron dynamics. The present study identifies a new saturation process of the KBM turbulence originating from the spatial structure of the KBM instabilities in a high-beta Large Helical Device (LHD) plasma. Specifically, the most unstable KBM in LHD has an inclined mode structure with respect to the mid-plane of a torus, i.e. it has finite radial wave-number in flux tube coordinates, in contrast to KBMs in tokamaks as well as ITG modes in tokamaks and helical systems. The simulations reveal that the growth of KBMs in LHD is saturated by nonlinear interactions of oppositely inclined convection cells through mutual shearing, rather than by the zonal flow shear. The mechanism is quantitatively evaluated by analysis of the nonlinear entropy transfer.

  8. Interpreting beta-diversity components over time to conserve metacommunities in highly dynamic ecosystems.

    Science.gov (United States)

    Ruhí, Albert; Datry, Thibault; Sabo, John L

    2017-02-11

    The concept of metacommunity (i.e., a set of local communities linked by dispersal) has gained great popularity among community ecologists. However, metacommunity research mostly addresses questions on spatial patterns of biodiversity at the regional scale, whereas conservation planning requires quantifying temporal variation in those metacommunities and the contributions that individual (local) sites make to regional dynamics. We propose that recent advances in diversity-partitioning methods may allow for a better understanding of metacommunity dynamics and the identification of keystone sites. We used time series of the 2 components of beta diversity (richness and replacement) and the contributions of local sites to these components to examine which sites controlled source-sink dynamics in a highly dynamic model system (an intermittent river). The relative importance of the richness and replacement components of beta diversity fluctuated over time, and sample aggregation led to underestimation of beta diversity by up to 35%. Our literature review revealed that research on intermittent rivers would benefit greatly from examination of beta-diversity components over time. Adequately appraising spatiotemporal variability in community composition and identifying sites that are pivotal for maintaining biodiversity at the landscape scale are key needs for conservation prioritization and planning. Thus, our framework may be used to guide conservation actions in highly dynamic ecosystems when time-series data describing biodiversity across sites connected by dispersal are available. © 2017 Society for Conservation Biology.

  9. Determinants of High Schools' Advanced Course Offerings

    Science.gov (United States)

    Iatarola, Patrice; Conger, Dylan; Long, Mark C.

    2011-01-01

    This article examines the factors that determine a high school's probability of offering Advanced Placement (AP) and International Baccalaureate (IB) courses. The likelihood that a school offers advanced courses, and the number of sections that it offers, is largely driven by having a critical mass of students who enter high school with…

  10. Overview of the Advanced High Frequency Branch

    Science.gov (United States)

    Miranda, Felix A.

    2015-01-01

    This presentation provides an overview of the competencies, selected areas of research and technology development activities, and current external collaborative efforts of the NASA Glenn Research Center's Advanced High Frequency Branch.

  11. High Performance Grinding and Advanced Cutting Tools

    CERN Document Server

    Jackson, Mark J

    2013-01-01

    High Performance Grinding and Advanced Cutting Tools discusses the fundamentals and advances in high performance grinding processes, and provides a complete overview of newly-developing areas in the field. Topics covered are grinding tool formulation and structure, grinding wheel design and conditioning and applications using high performance grinding wheels. Also included are heat treatment strategies for grinding tools, using grinding tools for high speed applications, laser-based and diamond dressing techniques, high-efficiency deep grinding, VIPER grinding, and new grinding wheels.

  12. Advances in high voltage engineering

    CERN Document Server

    Haddad, A

    2005-01-01

    This book addresses the very latest research and development issues in high voltage technology and is intended as a reference source for researchers and students in the field, specifically covering developments throughout the past decade. This unique blend of expert authors and comprehensive subject coverage means that this book is ideally suited as a reference source for engineers and academics in the field for years to come.

  13. Advances in high temperature chemistry 1

    CERN Document Server

    Eyring, Leroy

    2013-01-01

    Advances in High Temperature Chemistry, Volume 1 describes the complexities and special and changing characteristics of high temperature chemistry. After providing a brief definition of high temperature chemistry, this nine-chapter book goes on describing the experiments and calculations of diatomic transition metal molecules, as well as the advances in applied wave mechanics that may contribute to an understanding of the bonding, structure, and spectra of the molecules of high temperature interest. The next chapter provides a summary of gaseous ternary compounds of the alkali metals used in

  14. Cluster observes formation of high-beta plasma blobs

    Directory of Open Access Journals (Sweden)

    G. Haerendel

    2004-07-01

    Full Text Available Late in a sequence of four moderate substorms on 26 July 2001, Cluster observed periods of a few minutes durations of high-beta plasma events (B<10nT, β=2-30, connected with dipolarizations of the magnetic field. Cluster was located near 02:45 MLT, at R=19RE and at about 5°N GSM. These events began late in the recovery phase of the second and about 5min before onset of the third substorm and lasted for three hours, way beyond the recovery phase of the fourth substorm. The most remarkable observation is that the onset coincided with the arrival of energetic (E~7keV O+ ions and energetic electrons obviously from the ionosphere, which tended to dominate the plasma composition throughout the remaining time. The magnetic flux and plasma transport is continuously directed equatorward and earthward, with oscillatory east-west movements superposed. Periods of the order of 5-10min and strong correlations between the magnetic elevation angle and log β (correlation coefficient 0.78 are highly reminiscent of the high-beta plasma blobs discovered with Equator-S and Geotail between 9 and 11RE in the late night/early morning sector (Haerendel et al., 1999.

    We conclude that Cluster observed the plasma blob formation in the tail plasma sheet, which seems to occur predominantly in the recovery and post-recovery phases of substorms. This is consistent with the finding of Equator-S and Geotail. The origin is a pulsed earthward plasma transport with velocity amplitudes of only several tens of km/s.

  15. Total beta-globin gene deletion has high frequency in Filipinos

    Energy Technology Data Exchange (ETDEWEB)

    Patrick, N.; Miyakawa, F.; Hunt, J.A. [Univ. of Hawaii, Honolulu, HI (United States)] [and others

    1994-09-01

    The distribution of {beta}-thalassemia [{beta}{sup Th}] mutations is unique to each ethnic group. Most mutations affect one or a few bases; large deletions have been rare. Among families screened in Hawaii, [{beta}{sup Th}] heterozygotes were diagnosed by microcytosis, absence of abnormal hemoglobins on isoelectric focusing, and raised Hb A{sub 2} by chromatography. Gene frequency for {beta}{sup Th} was 0.02 in Filipinos. In Filipinos, polymerase chain reaction [PCR] with denaturing gradient gel electrophoresis for {beta}{sup Th} mutations detected a mutation in only 6 of 42 {beta}{sup Th} heterozygotes; an IVS2-666 C/T polymorphism showed non-heterozygosity in 37 and heterozygosity in only 5 of these {beta}{sup Th} heterozygotes. One {beta}{sup Th}/{beta}{sup Th} major patient and his mother had no mutation detected by allele-specific oligomer hybridization; PCR failed to amplify any DNA from his {beta}-globin gene. After a total {beta}-globin gene deletion [{beta}{sup Del}] was found in a Filipino family in Ontario, specific PCR amplification for {beta}{sup Del} detected this in 43 of 53 {beta}{sup Th} Filipino samples tested; the above {beta}{sup Th}/{beta}{sup Th} patient was a ({beta}{sup Del}/{beta}{sup Del}) homozygote. The {beta}{sup Del} may account for over 60% of all {beta}{sup Th} alleles in Filipinos; this is the highest proportion of a deletion {beta}{sup Th} mutation reported from any population. Most but not all {beta}{sup Del} heterozygotes had high Hb F [5.13 {plus_minus} 3.94 mean {plus_minus} 1 s.d.] compared to the codon 41/42 four base deletion common in Chinese [2.30 {plus_minus} 0.86], or to {beta}{sup Th} heterozygotes with normal {alpha}-globin genes [2.23 {plus_minus} 0.80].

  16. Suppression of Electron Thermal Conduction in High $\\beta$ Plasma

    CERN Document Server

    Roberg-Clark, G T; Reynolds, C S; Swisdak, M

    2016-01-01

    Electron heat conduction is explored with particle-in-cell simulations and analytic modeling in a high $\\beta$ system relevant to galaxy clusters. Linear wave theory reveals that whistler waves are driven unstable by electron heat flux even when the heat flux is weak. The resonant interaction of electrons with these waves plays a critical role in controlling the impact of the waves on the heat flux. In a 1D model only electrons moving opposite in direction to the heat flux resonate with the waves and electron heat flux is only modestly reduced. In a 2D system transverse whistlers also resonate with electrons propagating in the direction of the heat flux and resonant overlap leads to strong suppression of electron heat flux. The results suggest that electron heat conduction might be strongly suppressed in galaxy clusters.

  17. High temperature oxidation of beta-NiAl

    Science.gov (United States)

    Koychak, J. K.; Mitchell, T. E.; Smialek, J. L.

    1985-01-01

    The oxidation of single crystal beta-NiAl has been studied primarily using electron microscopy. Oriented metastable Al2O3 phases form during transient oxidation at 800 C. Specific orientation relationships exist on all metal orientations studied and are a result of the small mismatch along aligned close-packed directions in the cation sublattices of the metal and oxide. Transformation of the metastable Al2O3 phases at 1100 C results in an oxide morphology described as the 'lacey' structure of alpha-Al2O3 scales. This structure results from impingement of oriented patches of alpha-Al2O3 as the transformation initiates and moves radially parallel to the surface. Scale growth occurs by diffusion along high angle grain boundaries. A drastic reduction in oxidation rate accompanies the change in oxide morphology.

  18. High-beta plasma blobs in the morningside plasma sheet

    Directory of Open Access Journals (Sweden)

    G. Haerendel

    Full Text Available Equator-S frequently encountered, i.e. on 30% of the orbits between 1 March and 17 April 1998, strong variations of the magnetic field strength of typically 5–15-min duration outside about 9RE during the late-night/early-morning hours. Very high-plasma beta values were found, varying between 1 and 10 or more. Close conjunctions between Equator-S and Geotail revealed the spatial structure of these "plasma blobs" and their lifetime. They are typically 5–10° wide in longitude and have an antisymmetric plasma or magnetic pressure distribution with respect to the equator, while being altogether low-latitude phenomena 
    (≤ 15°. They drift slowly sunward, exchange plasma across the equator and have a lifetime of at least 15–30 min. While their spatial structure may be due to some sort of mirror instability, little is known about the origin of the high-beta plasma. It is speculated that the morningside boundary layer somewhat further tailward may be the source of this plasma. This would be consistent with the preference of the plasma blobs to occur during quiet conditions, although they are also found during substorm periods. The relation to auroral phenomena in the morningside oval is uncertain. The energy deposition may be mostly too weak to generate a visible signature. However, patchy aurora remains a candidate for more disturbed periods.

    Key words. Magnetospheric physics (plasma convection; plasma sheet; plasma waves and instabilities

  19. Investigation of instabilities and rotation alteration in high beta KSTAR plasmas

    Science.gov (United States)

    Park, Y. S.; Sabbagh, S. A.; Ko, W. H.; Bak, J. G.; Berkery, J. W.; Bialek, J. M.; Choi, M. J.; Hahn, S. H.; In, Y. K.; Jardin, S. C.; Jeon, Y. M.; Kim, J.; Kwak, J. G.; Lee, S. G.; Oh, Y. K.; Park, H. K.; Yoon, S. W.; Yun, G. S.

    2017-01-01

    H-mode plasma operation of the Korea Superconducting Tokamak Advanced Research (KSTAR) device has been expanded to significantly surpass the ideal MHD no-wall beta limit. Plasmas with high normalized beta, βN, up to 4.3 have been achieved with reduced plasma internal inductance, li, to near 0.7, exceeding the computed n = 1 ideal no-wall limit by a factor of 1.6. Pulse lengths at maximum βN were extended to longer pulses by new, more rapid control. The stability of the observed m/n = 2/1 tearing mode that limited the achieved high βN is computed by the M3D-C1 code, and the effect of sheared toroidal rotation to tearing stability is examined. As a method to affect the mode stability in high βN plasmas, the non-resonant alteration of the rotation profile by non-axisymmetric magnetic fields has been used, enabling a study of the underlying neoclassical toroidal viscosity (NTV) physics and stability dependence on rotation. Non-axisymmetric field spectra were applied using in-vessel control coils (IVCCs) with varied n = 2 field configurations to alter the plasma toroidal rotation profile in high beta H-mode plasmas and to analyze their effects on the rotation. The rotation profile was significantly altered with rotation reduced by more than 60% without tearing activity or mode locking. To investigate the physical characteristics and scaling of the measured rotation braking by NTV, changes in the rotation profile are analytically examined in steady state. The expected NTV scaling with the square of the normalized applied field perturbation agrees with the measured profile change δB2.1-2.3. The NTV is also found to scale as Ti2.1-2.4, in general agreement with the low collisionality "1/ν" regime scaling of the NTV theory (TNTV-(1/ν) ∝ Ti2.5).

  20. Electromagnetic effects on dynamics of high-beta filamentary structures

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Wonjae; Krasheninnikov, Sergei I., E-mail: skrash@mae.ucsd.edu [University of California, San Diego, 9500 Gilman Drive, La Jolla, California 92093 (United States); Umansky, Maxim V. [Lawrence Livermore National Laboratory, 7000 East Avenue, Livermore, California 94550 (United States); Angus, J. R. [Naval Research Laboratory, 4555 Overlook Avenue, Washington, DC 20375 (United States)

    2015-01-15

    The impacts of the electromagnetic effects on blob dynamics are considered. Electromagnetic BOUT++ simulations on seeded high-beta blobs demonstrate that inhomogeneity of magnetic curvature or plasma pressure along the filament leads to bending of the blob filaments and the magnetic field lines due to increased propagation time of plasma current (Alfvén time). The bending motion can enhance heat exchange between the plasma facing materials and the inner scrape-off layer (SOL) region. The effects of sheath boundary conditions on the part of the blob away from the boundary are also diminished by the increased Alfvén time. Using linear analysis and BOUT++ simulations, it is found that electromagnetic effects in high temperature and high density plasmas reduce the growth rate of resistive drift wave instability when resistivity drops below a certain value. The blobs temperature decreases in the course of its motion through the SOL and so the blob can switch from the electromagnetic to the electrostatic regime where resistive drift waves become important again.

  1. Movement-related beta oscillations show high intra-individual reliability.

    Science.gov (United States)

    Espenhahn, Svenja; de Berker, Archy O; van Wijk, Bernadette C M; Rossiter, Holly E; Ward, Nick S

    2017-02-15

    Oscillatory activity in the beta frequency range (15-30Hz) recorded from human sensorimotor cortex is of increasing interest as a putative biomarker of motor system function and dysfunction. Despite its increasing use in basic and clinical research, surprisingly little is known about the test-retest reliability of spectral power and peak frequency measures of beta oscillatory signals from sensorimotor cortex. Establishing that these beta measures are stable over time in healthy populations is a necessary precursor to their use in the clinic. Here, we used scalp electroencephalography (EEG) to evaluate intra-individual reliability of beta-band oscillations over six sessions, focusing on changes in beta activity during movement (Movement-Related Beta Desynchronization, MRBD) and after movement termination (Post-Movement Beta Rebound, PMBR). Subjects performed visually-cued unimanual wrist flexion and extension. We assessed Intraclass Correlation Coefficients (ICC) and between-session correlations for spectral power and peak frequency measures of movement-related and resting beta activity. Movement-related and resting beta power from both sensorimotor cortices was highly reliable across sessions. Resting beta power yielded highest reliability (average ICC=0.903), followed by MRBD (average ICC=0.886) and PMBR (average ICC=0.663). Notably, peak frequency measures yielded lower ICC values compared to the assessment of spectral power, particularly for movement-related beta activity (ICC=0.386-0.402). Our data highlight that power measures of movement-related beta oscillations are highly reliable, while corresponding peak frequency measures show greater intra-individual variability across sessions. Importantly, our finding that beta power estimates show high intra-individual reliability over time serves to validate the notion that these measures reflect meaningful individual differences that can be utilised in basic research and clinical studies. Copyright © 2016 The

  2. Peginterferon beta-1a reduces disability worsening in relapsing–remitting multiple sclerosis: 2-year results from ADVANCE

    Science.gov (United States)

    Newsome, Scott D.; Kieseier, Bernd C.; Liu, Shifang; You, Xiaojun; Kinter, Elizabeth; Hung, Serena; Sperling, Bjoern

    2016-01-01

    Background: In the pivotal phase III 2-year ADVANCE study, subcutaneous peginterferon beta-1a 125 mcg every 2 weeks demonstrated significant improvements in clinical outcomes, including disability endpoints, in patients with relapsing–remitting multiple sclerosis (RRMS). Here, we aim to further evaluate disability data from ADVANCE, and explore associations between confirmed disability progression (CDP), functional status, and health-related quality of life (HRQoL). Methods: In total, 1512 patients were randomized to placebo or peginterferon beta-1a 125 mcg every 2 or 4 weeks. After 1 year, patients on placebo were re-randomized to peginterferon beta-1a every 2 or 4 weeks. CDP was defined as ⩾1.0 point increase from a baseline Expanded Disability Status Scale (EDSS) score ⩾ 1.0, or ⩾1.5-point increase from baseline 0, confirmed 12 or 24 weeks after onset. Results: Peginterferon beta-1a every 2 weeks significantly reduced risk of 12- and 24-week CDP at 1 year compared with placebo (12-week CDP: 6.8% versus 10.5%, p = 0.038; 24-week CDP: 4% versus 8.4%, p = 0.0069, peginterferon beta-1a every 2 weeks versus placebo, respectively). Benefits were maintained over 2 years (11.2% and 7.7%, peginterferon beta-1a every 2 weeks in 12- and 24-week CDP, respectively). Approximately 90% of patients with 24-week CDP had simultaneous worsening by ⩾1 point in at least one functional system score, most commonly pyramidal. Displaying a 24-week CDP was associated with worse scores on the Multiple Sclerosis Functional Composite (MSFC) scale and several HRQoL instruments; the impact of CDP was attenuated by treatment with peginterferon beta-1a every 2 weeks. Conclusions: Peginterferon beta-1a has the potential to prevent/delay worsening of disability in patients with relapsing–remitting multiple sclerosis. Furthermore, improved benefits in disability status with peginterferon beta-1a were also associated with improved functional status and HRQoL [Clinical

  3. Electromagnetic instability in high-beta plasmas with generalized distribution functions

    Science.gov (United States)

    Buti, B.

    1974-01-01

    The electrostatic instabilities in an anisotropic plasma have been studied quite extensively, but the electromagnetic instabilities in high-beta plasmas, where they play an important role, have not been thoroughly investigated. Recently, Davidson and Wu (1970) looked into the ordinary mode electromagnetic instability which can arise in high-beta bi-Maxwellian plasmas. Here, the magnetic instability is discussed in (A, beta) space (A is the anisotropy in the temperature of the plasma species and beta is the ratio of the kinetic pressure to the magnetic pressure), which can occur in generalized non-Maxwellian plasmas with an inverted population of different species.

  4. Plasma behaviour at high beta and high density in the Madison Symmetric Torus RFP

    Energy Technology Data Exchange (ETDEWEB)

    Wyman, M. [University of Wisconsin, Madison; Chapman, B. E. [University of Wisconsin, Madison; Ahn, J. W. [University of Wisconsin, Madison; Almagri, A. F. [University of Wisconsin, Madison; Anderson, J. [University of Wisconsin, Madison; Bonomo, F. [Consorzio RFX, Italy; Bower, D L [University of California, Los Angeles; Combs, Stephen Kirk [ORNL; Craig, D. [University of Wisconsin, Madison; Foust, Charles R [ORNL

    2009-01-01

    Pellet fuelling of improved confinement Madison Symmetric Torus (MST) plasmas has resulted in high density and high plasma beta. The density in improved confinement discharges has been increased fourfold, and a record plasma beta (beta(tot) = 26%) for the improved confinement reversed-field pinch (RFP) has been achieved. At higher beta, a new regime for instabilities is accessed in which local interchange and global tearing instabilities are calculated to be linearly unstable, but experimentally, no severe effect, e. g., a disruption, is observed. The tearing instability, normally driven by the current gradient, is driven by the pressure gradient in this case, and there are indications of increased energy transport ( as compared with low-density improved confinement). Pellet fuelling is also compared with enhanced edge fuelling of standard confinement RFP discharges for the purpose of searching for a density limit in MST. In standard-confinement discharges, pellet fuelling peaks the density profile where edge fuelling cannot, but transport appears unchanged. For a limited range of plasma current, MST discharges with edge fuelling are constrained to a maximum density corresponding to the Greenwald limit. This limit is surpassed in pellet-fuelled improved confinement discharges.

  5. A stable route to high-{beta}{sub p} plasmas with non-monotonic q-profiles

    Energy Technology Data Exchange (ETDEWEB)

    Soeldner, F.X.; Baranov, Y.; Bhatnagar, V.P.; Bickley, A.J.; Challis, C.D.; Fischer, B.; Gormezano, C.; Huysmans, G.T.A.; Kerner, W.; Rimini, F.; Sips, A.C.C.; Springmann, R.; Taroni, A. [Commission of the European Communities, Abingdon (United Kingdom). JET Joint Undertaking; Goedbloed, J.P.; Holties, H.A. [Institute for Plasmas Physics, Nieuwegein (Netherlands); Parail, V.V.; Pereverzev, G.V. [Kurchatov Institute of Atomic Energy, Moscow (Russian Federation)

    1994-07-01

    Steady-state operation of tokamak reactors seems feasible in so-called Advanced Scenarios with high bootstrap current in high-beta{sub p} operation. The stabilization of such discharges with noninductive profile control will be attempted on JET in pursuit of previous high bootstrap current studies. Results of modelling studies of full noninductive current drive scenarios in JET and ITER are presented. Fast Waves (FW), Lower Hybrid (LH) Waves and Neutral Beam Injection (NBI) are used for heating and current drive, alternatively or in combination. A stable route to nonmonotonic q-profiles has been found with a specific ramp-up scenario which combines LH-current drive (LHCD) and a fast Ohmic ramp-up. A hollow current profile with deep shear reversal over the whole central region is thereby formed in an early low-beta phase and frozen in by additional heating. (authors). 5 refs., 4 figs.

  6. Chronic beta-blocker treatment in patients with advanced heart failure - Effects on neurohormones

    NARCIS (Netherlands)

    Teisman, ACH; van Veldhuisen, DJ; Boomsma, F; de Kam, PJ; Pinto, YM; de Zeeuw, D; van Gilst, WH

    2000-01-01

    Background: To date, the use of beta-blockers in treating patients with chronic heart failure gains support, this since several large clinical trials reported reduced mortality after chronic beta-blockade. Part of these beneficial effects may result from inhibition of deleterious neurohormone activa

  7. Effectiveness of beta-blocker therapy in daily practice patients with advanced chronic heart failure; is there an effect-modification by age?

    NARCIS (Netherlands)

    Dobre, D.; deJongste, M.J.L.; Lucas, C.; Cleuren, G.; van Veldhuisen, D.J.; Ranchor, A.V.; Haaijer-Ruskamp, F.

    2007-01-01

    Aims The effects of beta-blockers in daily practice patients with advanced chronic heart failure (CHF) and a broad range of ejection fraction (EF) are not well established. We aimed to assess, first, the association between beta-blocker prescription at discharge and mortality in a cohort of patients

  8. Advances in Very High Frequency Power Conversion

    DEFF Research Database (Denmark)

    Kovacevic, Milovan

    . Excellent performance and small size of magnetic components and capacitors at very high frequencies, along with constant advances in performance of power semiconductor devices, suggests a sizable shift in consumer power supplies market into this area in the near future. To operate dc-dc converter power...... to be applied, especially at low power levels where gating loss becomes a significant percentage of the total loss budget. Various resonant gate drive methods have been proposed to address this design challenge, with varying size, cost, and complexity. This dissertation presents a self-oscillating resonant gate...

  9. Advanced High Voltage Power Device Concepts

    CERN Document Server

    Baliga, B Jayant

    2012-01-01

    Advanced High Voltage Power Device Concepts describes devices utilized in power transmission and distribution equipment, and for very high power motor control in electric trains and steel-mills. Since these devices must be capable of supporting more than 5000-volts in the blocking mode, this books covers operation of devices rated at 5,000-V, 10,000-V and 20,000-V. Advanced concepts (the MCT, the BRT, and the EST) that enable MOS-gated control of power thyristor structures are described and analyzed in detail. In addition, detailed analyses of the silicon IGBT, as well as the silicon carbide MOSFET and IGBT, are provided for comparison purposes. Throughout the book, analytical models are generated to give a better understanding of the physics of operation for all the structures. This book provides readers with: The first comprehensive treatment of high voltage (over 5000-volts) power devices suitable for the power distribution, traction, and motor-control markets;  Analytical formulations for all the device ...

  10. High-$\\gamma$ Beta Beams within the LAGUNA design study

    CERN Document Server

    Orme, Christopher

    2010-01-01

    Within the LAGUNA design study, seven candidate sites are being assessed for their feasibility to host a next-generation, very large neutrino observatory. Such a detector will be expected to feature within a future European accelerator neutrino programme (Superbeam or Beta Beam), and hence the distance from CERN is of critical importance. In this article, the focus is a $^{18}$Ne and $^{6}$He Beta Beam sourced at CERN and directed towards a 50 kton Liquid Argon detector located at the LAGUNA sites: Slanic (L=1570 km) and Pyh\\"{a}salmi (L=2300 km). To improve sensitivity to the neutrino mass ordering, these baselines are then combined with a concurrent run with the same flux directed towards a large Water \\v{C}erenkov detector located at Canfranc (L=650 km). This degeneracy breaking combination is shown to provide comparable physics reach to the conservative Magic Baseline Beta Beam proposals. For $^{18}$Ne ions boosted to $\\gamma=570$ and $^{6}$He ions boosted to $\\gamma=350$, the correct mass ordering can be...

  11. Advances in high power semiconductor diode lasers

    Science.gov (United States)

    Ma, Xiaoyu; Zhong, Li

    2008-03-01

    High power semiconductor lasers have broad applications in the fields of military and industry. Recent advances in high power semiconductor lasers are reviewed mainly in two aspects: improvements of diode lasers performance and optimization of packaging architectures of diode laser bars. Factors which determine the performance of diode lasers, such as power conversion efficiency, temperature of operation, reliability, wavelength stabilization etc., result from a combination of new semiconductor materials, new diode structures, careful material processing of bars. The latest progress of today's high-power diode lasers at home and abroad is briefly discussed and typical data are presented. The packaging process is of decisive importance for the applicability of high-power diode laser bars, not only technically but also economically. The packaging techniques include the material choosing and the structure optimizing of heat-sinks, the bonding between the array and the heat-sink, the cooling and the fiber coupling, etc. The status of packaging techniques is stressed. There are basically three different diode package architectural options according to the integration grade. Since the package design is dominated by the cooling aspect, different effective cooling techniques are promoted by different package architectures and specific demands. The benefit and utility of each package are strongly dependent upon the fundamental optoelectronic properties of the individual diode laser bars. Factors which influence these properties are outlined and comparisons of packaging approaches for these materials are made. Modularity of package for special application requirements is an important developing tendency for high power diode lasers.

  12. Osteocalcin protects pancreatic beta cell function and survival under high glucose conditions

    Energy Technology Data Exchange (ETDEWEB)

    Kover, Karen, E-mail: kkover@cmh.edu [Division of Endocrine/Diabetes, Children' s Mercy Hospital & Clinics, Kansas City, MO 64108 (United States); University of Missouri-Kansas City School of Medicine, Kansas City, MO 64108 (United States); Yan, Yun; Tong, Pei Ying; Watkins, Dara; Li, Xiaoyu [Division of Endocrine/Diabetes, Children' s Mercy Hospital & Clinics, Kansas City, MO 64108 (United States); University of Missouri-Kansas City School of Medicine, Kansas City, MO 64108 (United States); Tasch, James; Hager, Melissa [Kansas City University Medical Biosciences, Kansas City, MO (United States); Clements, Mark; Moore, Wayne V. [Division of Endocrine/Diabetes, Children' s Mercy Hospital & Clinics, Kansas City, MO 64108 (United States); University of Missouri-Kansas City School of Medicine, Kansas City, MO 64108 (United States)

    2015-06-19

    Diabetes is characterized by progressive beta cell dysfunction and loss due in part to oxidative stress that occurs from gluco/lipotoxicity. Treatments that directly protect beta cell function and survival in the diabetic milieu are of particular interest. A growing body of evidence suggests that osteocalcin, an abundant non-collagenous protein of bone, supports beta cell function and proliferation. Based on previous gene expression data by microarray, we hypothesized that osteocalcin protects beta cells from glucose-induced oxidative stress. To test our hypothesis we cultured isolated rat islets and INS-1E cells in the presence of normal, high, or high glucose ± osteocalcin for up to 72 h. Oxidative stress and viability/mitochondrial function were measured by H{sub 2}O{sub 2} assay and Alamar Blue assay, respectively. Caspase 3/7 activity was also measured as a marker of apoptosis. A functional test, glucose stimulated insulin release, was conducted and expression of genes/protein was measured by qRT-PCR/western blot/ELISA. Osteocalcin treatment significantly reduced high glucose-induced H{sub 2}O{sub 2} levels while maintaining viability/mitochondrial function. Osteocalcin also significantly improved glucose stimulated insulin secretion and insulin content in rat islets after 48 h of high glucose exposure compared to untreated islets. As expected sustained high glucose down-regulated gene/protein expression of INS1 and BCL2 while increasing TXNIP expression. Interestingly, osteocalcin treatment reversed the effects of high glucose on gene/protein expression. We conclude that osteocalcin can protect beta cells from the negative effects of glucose-induced oxidative stress, in part, by reducing TXNIP expression, thereby preserving beta cell function and survival. - Highlights: • Osteocalcin reduces glucose-induced oxidative stress in beta cells. • Osteocalcin preserves beta cell function and survival under stress conditions. • Osteocalcin reduces glucose

  13. The Advanced Telescope for High Energy Astrophysics

    Science.gov (United States)

    Guainazzi, Matteo

    2017-08-01

    Athena (the Advanced Telescope for High Energy Astrophysics) is a next generation X-ray observatory currently under study by ESA for launch in 2028. Athena is designed to address the Hot and Energetic Universe science theme, which addresses two key questions: 1) How did ordinary matter evolve into the large scale structures we see today? 2) How do black holes grow and shape the Universe. To address these topics Athena employs an innovative X-ray telescope based on Silicon Pore Optics technology to deliver extremely light weight and high throughput, while retaining excellent angular resolution. The mirror can be adjusted to focus onto one of two focal place instruments: the X-ray Integral Field Unit (X-IFU) which provides spatially-resolved, high resolution spectroscopy, and the Wide Field Imager (WFI) which provides spectral imaging over a large field of view, as well as high time resolution and count rate tolerance. Athena is currently in Phase A and the study status will be reviewed, along with the scientific motivations behind the mission.

  14. High performance anode for advanced Li batteries

    Energy Technology Data Exchange (ETDEWEB)

    Lake, Carla [Applied Sciences, Inc., Cedarville, OH (United States)

    2015-11-02

    The overall objective of this Phase I SBIR effort was to advance the manufacturing technology for ASI’s Si-CNF high-performance anode by creating a framework for large volume production and utilization of low-cost Si-coated carbon nanofibers (Si-CNF) for the battery industry. This project explores the use of nano-structured silicon which is deposited on a nano-scale carbon filament to achieve the benefits of high cycle life and high charge capacity without the consequent fading of, or failure in the capacity resulting from stress-induced fracturing of the Si particles and de-coupling from the electrode. ASI’s patented coating process distinguishes itself from others, in that it is highly reproducible, readily scalable and results in a Si-CNF composite structure containing 25-30% silicon, with a compositionally graded interface at the Si-CNF interface that significantly improve cycling stability and enhances adhesion of silicon to the carbon fiber support. In Phase I, the team demonstrated the production of the Si-CNF anode material can successfully be transitioned from a static bench-scale reactor into a fluidized bed reactor. In addition, ASI made significant progress in the development of low cost, quick testing methods which can be performed on silicon coated CNFs as a means of quality control. To date, weight change, density, and cycling performance were the key metrics used to validate the high performance anode material. Under this effort, ASI made strides to establish a quality control protocol for the large volume production of Si-CNFs and has identified several key technical thrusts for future work. Using the results of this Phase I effort as a foundation, ASI has defined a path forward to commercialize and deliver high volume and low-cost production of SI-CNF material for anodes in Li-ion batteries.

  15. Advanced high strength steels for automotive industry

    Directory of Open Access Journals (Sweden)

    Galán, J.

    2012-04-01

    Full Text Available The car industry is facing pressure because of the growing demand for more fuel-efficient passenger cars. In order to limit energy consumption and air pollution the weight of the carbody has to be reduced. At the same time, high levels of safety have to be guaranteed. In this situation, the choice of material becomes a key decision in car design. As a response to the requirements of the automotive sector, high strength steels and advanced high strength steels have been developed by the steel industry. These modern steel grades offer an excellent balance of low cost, light weight and mechanical properties.

    La industria del automóvil se enfrenta a una creciente demanda de vehículos de pasajeros más eficientes. Con el fin de disminuir el consumo de energía y la contaminación ambiental, el peso del vehículo tiene que ser reducido, al mismo tiempo que se garantizan altos niveles de seguridad. Ante esta situación, la elección de material se convierte en una decisión crucial en el diseño del vehículo. Como respuesta a las necesidades del sector automovilístico, nuevos aceros avanzados y de alta resistencia, han sido desarrollados por la industria siderúrgica. Dichos tipos de acero ofrecen un excelente equilibrio de precio, peso y propiedades mecánicas.

  16. Advances in High Energy Materials (Review Paper

    Directory of Open Access Journals (Sweden)

    U. R. Nair

    2010-03-01

    Full Text Available Research and development efforts for realizing higher performance levels of high energy materials (HEMs are continued unabated all over the globe. Of late, it is becoming increasingly necessary to ensure that such materials are also eco-friendly. This has provided thrust to research in the area of force multiplying HEMs and compounds free from pollution causing components. Enhancement of the performance necessitates introduction of strained structure or increase in oxygen balance to achieve near stoichiometry. The search for environment friendly molecules is focused on chlorine free propellant compositions and lead free primary explosives. Energetic polymers offer added advantage of partitioning of energy and thus not necessitating the concentration of only solid components (HEMs and metal fuels in the formulations, to achieve higher performance, thereby leading to improvement in energetics without adversely affecting the processability and mechanical properties. During recent times, research in the area of insensitive explosives has received impetus particularly with the signature of STANAG. This paper gives a review of the all-round advances in the areas of HEMs encompassing oxidizers, high-energy dense materials, insensitive high-energy materials, polymers and plasticizers. Selected formulations based on these materials are also included.Defence Science Journal, 2010, 60(2, pp.137-151, DOI:http://dx.doi.org/10.14429/dsj.60.327

  17. Advances in industrial high-power lasers

    Science.gov (United States)

    Schlueter, Holger

    2005-03-01

    Four major types of laser sources are used for material processing. Excluding Excimer lasers, this paper focuses on advances in High Power CO2 lasers, Solid State Lasers and Diode Lasers. Because of their unrivaled cost to brightness relationship the fast axial flow CO2 laser remains unrivaled for flat-sheet laser cutting. Adding approximately a kW of output power ever four years, this laser type has been propelling the entire sheet metal fabrication industry for the last two decades. Very robust, diffusion cooled annular discharge CO2 lasers with 2kW output power have enabled robot mounted lasers for 3D applications. Solid State Lasers are chosen mainly because of the option of fiber delivery. Industrial applications still rely on lamp-pumped Nd:YAG lasers with guaranteed output powers of 4.5 kW at the workpiece. The introduction of the diode pumped Thin Disc Laser 4.5 kW laser enables new applications such as the Programmable Focus Optics. Pumping the Thin Disc Laser requires highly reliable High Power Diode Lasers. The necessary reliability can only be achieved in a modern, automated semiconductor manufacturing facility. For Diode Lasers, electro-optical efficiencies above 65% are as important as the passivation of the facets to avoid Burn-In power degradation.

  18. Rhodamine-labeled 2beta-carbomethoxy-3beta-(3,4-dichlorophenyl)tropane analogues as high-affinity fluorescent probes for the dopamine transporter

    DEFF Research Database (Denmark)

    Cha, Joo Hwan; Zou, Mu-Fa; Adkins, Erika M

    2005-01-01

    Novel fluorescent ligands were synthesized to identify a high-affinity probe that would enable visualization of the dopamine transporter (DAT) in living cells. Fluorescent tags were extended from the N- or 2-position of 2beta-carbomethoxy-3beta-(3,4-dichlorophenyl)tropane, using an ethylamino lin...

  19. Advanced Functionalities for Highly Reliable Optical Networks

    DEFF Research Database (Denmark)

    An, Yi

    This thesis covers two research topics concerning optical solutions for networks e.g. avionic systems. One is to identify the applications for silicon photonic devices for cost-effective solutions in short-range optical networks. The other one is to realise advanced functionalities in order to in......) using two exclusive OR (XOR) gates realised by four-wave mixing (FWM) in semiconductor optical amplifiers (SOAs) is experimentally demonstrated and very low (~ 1 dB) total operation penalty is achieved....... to increase the availability of highly reliable optical networks. A cost-effective transmitter based on a directly modulated laser (DML) using a silicon micro-ring resonator (MRR) to enhance its modulation speed is proposed, analysed and experimentally demonstrated. A modulation speed enhancement from 10 Gbit...... interconnects and network-on-chips. A novel concept of all-optical protection switching scheme is proposed, where fault detection and protection trigger are all implemented in the optical domain. This scheme can provide ultra-fast establishment of the protection path resulting in a minimum loss of data...

  20. Integrating advanced facades into high performance buildings

    Energy Technology Data Exchange (ETDEWEB)

    Selkowitz, Stephen E.

    2001-05-01

    Glass is a remarkable material but its functionality is significantly enhanced when it is processed or altered to provide added intrinsic capabilities. The overall performance of glass elements in a building can be further enhanced when they are designed to be part of a complete facade system. Finally the facade system delivers the greatest performance to the building owner and occupants when it becomes an essential element of a fully integrated building design. This presentation examines the growing interest in incorporating advanced glazing elements into more comprehensive facade and building systems in a manner that increases comfort, productivity and amenity for occupants, reduces operating costs for building owners, and contributes to improving the health of the planet by reducing overall energy use and negative environmental impacts. We explore the role of glazing systems in dynamic and responsive facades that provide the following functionality: Enhanced sun protection and cooling load control while improving thermal comfort and providing most of the light needed with daylighting; Enhanced air quality and reduced cooling loads using natural ventilation schemes employing the facade as an active air control element; Reduced operating costs by minimizing lighting, cooling and heating energy use by optimizing the daylighting-thermal tradeoffs; Net positive contributions to the energy balance of the building using integrated photovoltaic systems; Improved indoor environments leading to enhanced occupant health, comfort and performance. In addressing these issues facade system solutions must, of course, respect the constraints of latitude, location, solar orientation, acoustics, earthquake and fire safety, etc. Since climate and occupant needs are dynamic variables, in a high performance building the facade solution have the capacity to respond and adapt to these variable exterior conditions and to changing occupant needs. This responsive performance capability

  1. Superconducting Quadrupole Prototype for the ISR high luminosity (low beta) insertion

    CERN Multimedia

    1977-01-01

    In colliders, smaller beam cross-section means higher luminosity. Beam-size being proportional to the square-root of the "beta function" value, a small beta means small beam size, hence high luminosity. In 1973 a study was launched on low-beta insertions using superconducting quadrupole magnets, which focus beams to very small sizes at the beam crossing points . In 1976 the first prototype of a superconducting quadrupole was tested. Here we see Theodor Tortschanoff with the prototype of 1.25 m magnetic length. Manufacture of 8 quadrupoles (4 of L=1.15 m, 4 of L=0.65 m) began at Alsthom in 1978. They were installed at intersection I8 of the ISR, enhancing luminosity there by a factor 7 until final low-beta operation in December 1983. For details see "Yellow Report" CERN 76-16. See also pictures 7702307, 7702308, 7702182,7510214X,7510217X.

  2. Beta decay of medium and high spin isomers in sup 9 sup 4 Ag

    CERN Document Server

    La Commara, M; Döring, J; Galanopoulos, S; Grawe, H; Harissopoulos, S V; Hellström, M; Janas, Z; Kirchner, R; Mazzocchi, C; Ostrowski, A N; Plettner, C; Rainovski, G; Roeckl, E; Schmidt, K

    2002-01-01

    The very neutron-deficient isotope sup 9 sup 4 Ag was produced at the GSI on-line mass separator by using the reaction sup 5 sup 8 Ni( sup 4 sup 0 Ca, p3n). The beta-decay properties of sup 9 sup 4 Ag were studied by detecting for the first time beta-delayed gamma rays and beta-gamma-gamma coincidences. Both the population of excited levels in the daughter nucleus sup 9 sup 4 Pd and the beta-decay half-life of sup 9 sup 4 Ag were investigated. The major part of the feeding was assigned to the decay of an I suppi=(7 sup +) isomer with a half-life of (0.36+-0.03) s. A weak beta-decay branch was found to populate high-spin levels in the sup 9 sup 4 Pd daughter with I>=18. It is tentatively assigned to the decay of a high-spin parent state in sup 9 sup 4 Ag with I>=17 and a half-life (0.3+-0.2) s. The measured beta-decay properties as well as the level structure of sup 9 sup 4 Ag and sup 9 sup 4 Pd are discussed in comparison with shell-model predictions.

  3. A new {beta}-diketone complex with high color purity

    Energy Technology Data Exchange (ETDEWEB)

    Adati, R.D. [Unesp, Sao Paulo State University, Instituto de Quimica C.P. 355, 14801-970 Araraquara-SP (Brazil); Lima, S.A.M. [Unesp, Sao Paulo State University, Instituto de Quimica C.P. 355, 14801-970 Araraquara-SP (Brazil); Davolos, M.R. [Unesp, Sao Paulo State University, Instituto de Quimica C.P. 355, 14801-970 Araraquara-SP (Brazil)]. E-mail: davolos@iq.unesp.br; Jafelicci, M. [Unesp, Sao Paulo State University, Instituto de Quimica C.P. 355, 14801-970 Araraquara-SP (Brazil)

    2006-07-20

    In this work a new europium (III) complex with the following formula NH{sub 4}[Eu(bmdm){sub 4}] was synthesized and characterized. The bmdm (butyl methoxy-dibenzoyl-methane) is a {beta}-diketone molecule used as UV radiation absorber in sunscreen formulations. Coordination of this ligand to the Eu{sup 3+} ion was confirmed by FT-IR, while the Raman spectrum suggests the presence of NH{sub 4} {sup +} ions. The photoluminescence spectra present narrow lines arising from f-f intra-configurational transitions {sup 5}D{sub 0}-{sup 7}F{sub 0,1,2,3,4}, dominated by the hypersensitive {sup 5}D{sub 0}-{sup 7}F{sub 2} transition. In the spectrum recorded at 77 K, all transitions split into 2J + 1 lines suggesting that there is just one symmetry site around Eu{sup 3+} ion. This symmetry is not centrosymmetric. The calculated intensity parameters are {omega} {sub 2} = 30.5 x 10{sup -20} cm{sup 2} and {omega} {sub 4} = 5.91 x 10{sup -20} cm{sup 2} for this complex. The CIE chromaticity coordinates (x = 0.67 and y = 0.32) show a dominant wavelength of 615 nm. The color gamut achieved by this complex is a 100% in the CIE color space.

  4. Balsamic Vinegar Improves High Fat-Induced Beta Cell Dysfunction via Beta Cell ABCA1

    Directory of Open Access Journals (Sweden)

    Hannah Seok

    2012-08-01

    Full Text Available BackgroundThe aim of this study was to investigate the effects of balsamic vinegar on β-cell dysfunction.MethodsIn this study, 28-week-old Otsuka Long-Evans Tokushima Fatty (OLETF rats were fed a normal chow diet or a high-fat diet (HFD and were provided with tap water or dilute balsamic vinegar for 4 weeks. Oral glucose tolerance tests and histopathological analyses were performed thereafter.ResultsIn rats fed both the both chow diet and the HFD, the rats given balsamic vinegar showed increased insulin staining in islets compared with tap water administered rats. Balsamic vinegar administration also increased β-cell ATP-binding cassette transporter subfamily A member 1 (ABCA1 expression in islets and decreased cholesterol levels.ConclusionThese findings provide the first evidence for an anti-diabetic effect of balsamic vinegar through improvement of β-cell function via increasing β-cell ABCA1 expression.

  5. Dry-boxes for manipulation of high-energy {beta} emitters; Bottes pour manipulation d'emetteurs {beta} energiques

    Energy Technology Data Exchange (ETDEWEB)

    Boclet, K.; Laurent, H. [Commissariat a l' Energie Atomique, Saclay (France). Centre d' Etudes Nucleaires

    1958-07-01

    Because of the thinners of latex or neoprene gloves and the high intensity of Bremsstrahlung radiation, manipulation of pure high-energy {beta}{sup -} emitters is impossible in ordinary dry-boxes. There are many types of box equipped with heavy lead or steel protection, but their use for radioelements such as {sup 32}P, {sup 90}Sr, {sup 90}Y is not justified. We have devised units known as 'tong boxes' which, while retaining much of the flexibility of operation found in dry-boxes, provide adequate protection. 1 curie of {sup 32}P placed in the centre of the enclosure gives about 15 mR/ 8 h. at the part of the wall closest to the source. (author) [French] La faible epaisseur des gants de latex ou de neoprene et l'importance du rayonnement de freinage rendent impossible la manipulation des emetteurs {beta}{sup -} purs energiques dans des boites a gants normales. Il existe de nombreux types d'enceintes dotees d'une forte protection de plomb ou d'acier dont l'emploi n'est pas justifie pour des radioelements tels que {sup 32}P, {sup 90}Sr, {sup 90}Y. Nous avons realise des ensembles appeles 'Boites a Pinces', qui tout en conservant une grande partie de la souplesse d'utilisation des boites a gants sont dotees d'une protection suffisante. 1 curie de {sup 32}P place au centre de l'enceinte donne environ 15 mR/ 8 h au contact de la paroi la plus rapprochee de la source. (auteur)

  6. Development of a third-generation total synthesis of (+)-discodermolide: an expedient Still-Gennari-type fragment coupling utilizing an advanced beta-ketophosphonate.

    Science.gov (United States)

    Paterson, Ian; Lyothier, Isabelle

    2005-07-01

    [structure: see text] A novel total synthesis of the complex polyketide discodermolide, a promising anticancer agent of marine sponge origin, has been completed in 11.1% overall yield over 21 linear steps. This third-generation approach features an unprecedented Still-Gennari-type HWE olefination reaction between advanced C1-C8 beta-ketophosphonate 61 and C9-C24 aldehyde 7, introducing the (8Z)-alkene with 10:1 selectivity. The stereotetrad found in the C1-C8 subunit 61 was established via a highly diastereoselective boron-mediated aldol reaction/in situ reduction between ketone (S)-8 and 3-benzyloxypropanal. The (7S)-configuration was installed by the reduction of enone 73 with K-Selectride.

  7. Highly sensitive phage-based biosensor for the detection of beta-galactosidase.

    Science.gov (United States)

    Nanduri, Viswaprakash; Balasubramanian, Shankar; Sista, Srinivas; Vodyanoy, Vitaly J; Simonian, Aleksandr L

    2007-04-25

    Development of real-time sensor based on the target-specific probe that make possible sensitive, rapid and selective detection and monitoring of the particular antigen molecules could be of substantial importance to the many applications. Because of its high specificity to the target molecules, excellent temperature stability, and easy production, bacterial phage might serve as a powerful biorecognition probe in biosensor applications. Here, we report extremely sensitive and specific label-free direct detection of model antigen, beta-galactosidase (beta-gal), based on surface plasmon resonance (SPR) spectroscopy. The beta-gal specific landscape phage 1G40 has been immobilized on the gold surface of SPR SPREETA sensor chip through physical adsorption [V. Nanduri, A.M. Samoylova, V.Petrenko, V. Vodyanoy and A.L.Simonian, Comparison of optical and acoustic wave phage biosensors, 206th Meeting of The Electrochemical Society, Honolulu, Hawaii, October 3-8, (2004)]. Another non-specific to the beta-gal phage, a wild-type phage F8-5, was used in the reference channel. The concentration-dependent binding of beta-gal in both channels were assessed by monitoring the sensor optical response as a function of time under different experimental conditions, and the concentration of beta-gal was computed in differential mode. Concentrations of beta-gal between 10(-12) M and 10(-7) M could be readily detected, with linear part of calibration curve between 10(-9) M and 10(-6) M. When beta-gal was pre-incubated with different concentrations of free 1G40 phage prior to exposure to the biosensor, concentration-dependent inhibition was observed, indicating on biosensor high specificity toward beta-gal. Apart from a flow through mode used to deliver the samples to the surface for the SPR sensor, batch mode sensing was also employed to study the binding of beta-gal to immobilized phage on the SPR sensor surface. Experiments using a flow through mode provided more consistent results in the

  8. Achieving a long-lived high-beta plasma state by energetic beam injection.

    Science.gov (United States)

    Guo, H Y; Binderbauer, M W; Tajima, T; Milroy, R D; Steinhauer, L C; Yang, X; Garate, E G; Gota, H; Korepanov, S; Necas, A; Roche, T; Smirnov, A; Trask, E

    2015-04-23

    Developing a stable plasma state with high-beta (ratio of plasma to magnetic pressures) is of critical importance for an economic magnetic fusion reactor. At the forefront of this endeavour is the field-reversed configuration. Here we demonstrate the kinetic stabilizing effect of fast ions on a disruptive magneto-hydrodynamic instability, known as a tilt mode, which poses a central obstacle to further field-reversed configuration development, by energetic beam injection. This technique, combined with the synergistic effect of active plasma boundary control, enables a fully stable ultra-high-beta (approaching 100%) plasma with a long lifetime.

  9. High-density SNP genotyping to define beta-globin locus haplotypes.

    Science.gov (United States)

    Liu, Li; Muralidhar, Shalini; Singh, Manisha; Sylvan, Caprice; Kalra, Inderdeep S; Quinn, Charles T; Onyekwere, Onyinye C; Pace, Betty S

    2009-01-01

    Five major beta-globin locus haplotypes have been established in individuals with sickle cell disease (SCD) from the Benin, Bantu, Senegal, Cameroon, and Arab-Indian populations. Historically, beta-haplotypes were established using restriction fragment length polymorphism (RFLP) analysis across the beta-locus, which consists of five functional beta-like globin genes located on chromosome 11. Previous attempts to correlate these haplotypes as robust predictors of clinical phenotypes observed in SCD have not been successful. We speculate that the coverage and distribution of the RFLP sites located proximal to or within the globin genes are not sufficiently dense to accurately reflect the complexity of this region. To test our hypothesis, we performed RFLP analysis and high-density single nucleotide polymorphism (SNP) genotyping across the beta-locus using DNA samples from healthy African Americans with either normal hemoglobin A (HbAA) or individuals with homozygous SS (HbSS) disease. Using the genotyping data from 88 SNPs and Haploview analysis, we generated a greater number of haplotypes than that observed with RFLP analysis alone. Furthermore, a unique pattern of long-range linkage disequilibrium between the locus control region and the beta-like globin genes was observed in the HbSS group. Interestingly, we observed multiple SNPs within the HindIII restriction site located in the Ggamma-globin intervening sequence II which produced the same RFLP pattern. These findings illustrated the inability of RFLP analysis to decipher the complexity of sequence variations that impacts genomic structure in this region. Our data suggest that high-density SNP mapping may be required to accurately define beta-haplotypes that correlate with the different clinical phenotypes observed in SCD.

  10. High beta-Lactamase Levels Change the Pharmacodynamics of beta-Lactam Antibiotics in Pseudomonas aeruginosa Biofilms

    DEFF Research Database (Denmark)

    Wang, Hengzhuang; Ciofu, Oana; Yang, Liang

    2013-01-01

    Resistance to beta-lactam antibiotics is a frequent problem in Pseudomonas aeruginosa lung infection of cystic fibrosis (CF) patients. This resistance is mainly due to the hyperproduction of chromosomally encoded beta-lactamase and biofilm formation. The purpose of this study was to investigate...

  11. The NEXT experiment: A high pressure xenon gas TPC for neutrinoless double beta decay searches

    CERN Document Server

    Lorca, D; Monrabal, F

    2012-01-01

    Neutrinoless double beta decay is a hypothetical, very slow nuclear transition in which two neutrons undergo beta decay simultaneously and without the emission of neutrinos. The importance of this process goes beyond its intrinsic interest: an unambiguous observation would establish a Majorana nature for the neutrino and prove the violation of lepton number. NEXT is a new experiment to search for neutrinoless double beta decay using a radiopure high-pressure xenon gas TPC, filled with 100 kg of Xe enriched in Xe-136. NEXT will be the first large high-pressure gas TPC to use electroluminescence readout with SOFT (Separated, Optimized FuncTions) technology. The design consists in asymmetric TPC, with photomultipliers behind a transparent cathode and position-sensitive light pixels behind the anode. The experiment is approved to start data taking at the Laboratorio Subterr\\'aneo de Canfranc (LSC), Spain, in 2014.

  12. Cystathionine beta-synthase (CBS) contributes to advanced ovarian cancer progression and drug resistance.

    Science.gov (United States)

    Bhattacharyya, Sanjib; Saha, Sounik; Giri, Karuna; Lanza, Ian R; Nair, K Sreekumar; Jennings, Nicholas B; Rodriguez-Aguayo, Cristian; Lopez-Berestein, Gabriel; Basal, Eati; Weaver, Amy L; Visscher, Daniel W; Cliby, William; Sood, Anil K; Bhattacharya, Resham; Mukherjee, Priyabrata

    2013-01-01

    Epithelial ovarian cancer is the leading cause of gynecologic cancer deaths. Most patients respond initially to platinum-based chemotherapy after surgical debulking, however relapse is very common and ultimately platinum resistance emerges. Understanding the mechanism of tumor growth, metastasis and drug resistant relapse will profoundly impact the therapeutic management of ovarian cancer. Using patient tissue microarray (TMA), in vitro and in vivo studies we report a role of of cystathionine-beta-synthase (CBS), a sulfur metabolism enzyme in ovarian carcinoma. We report here that the expression of cystathionine-beta-synthase (CBS), a sulfur metabolism enzyme, is common in primary serous ovarian carcinoma. The in vitro effects of CBS silencing can be reversed by exogenous supplementation with the GSH and H2S producing chemical Na2S. Silencing CBS in a cisplatin resistant orthotopic model in vivo by nanoliposomal delivery of CBS siRNA inhibits tumor growth, reduces nodule formation and sensitizes ovarian cancer cells to cisplatin. The effects were further corroborated by immunohistochemistry that demonstrates a reduction of H&E, Ki-67 and CD31 positive cells in si-RNA treated as compared to scrambled-RNA treated animals. Furthermore, CBS also regulates bioenergetics of ovarian cancer cells by regulating mitochondrial ROS production, oxygen consumption and ATP generation. This study reports an important role of CBS in promoting ovarian tumor growth and maintaining drug resistant phenotype by controlling cellular redox behavior and regulating mitochondrial bioenergetics. The present investigation highlights CBS as a potential therapeutic target in relapsed and platinum resistant ovarian cancer.

  13. Cystathionine beta-synthase (CBS contributes to advanced ovarian cancer progression and drug resistance.

    Directory of Open Access Journals (Sweden)

    Sanjib Bhattacharyya

    Full Text Available BACKGROUND: Epithelial ovarian cancer is the leading cause of gynecologic cancer deaths. Most patients respond initially to platinum-based chemotherapy after surgical debulking, however relapse is very common and ultimately platinum resistance emerges. Understanding the mechanism of tumor growth, metastasis and drug resistant relapse will profoundly impact the therapeutic management of ovarian cancer. METHODS/PRINCIPAL FINDINGS: Using patient tissue microarray (TMA, in vitro and in vivo studies we report a role of of cystathionine-beta-synthase (CBS, a sulfur metabolism enzyme in ovarian carcinoma. We report here that the expression of cystathionine-beta-synthase (CBS, a sulfur metabolism enzyme, is common in primary serous ovarian carcinoma. The in vitro effects of CBS silencing can be reversed by exogenous supplementation with the GSH and H2S producing chemical Na2S. Silencing CBS in a cisplatin resistant orthotopic model in vivo by nanoliposomal delivery of CBS siRNA inhibits tumor growth, reduces nodule formation and sensitizes ovarian cancer cells to cisplatin. The effects were further corroborated by immunohistochemistry that demonstrates a reduction of H&E, Ki-67 and CD31 positive cells in si-RNA treated as compared to scrambled-RNA treated animals. Furthermore, CBS also regulates bioenergetics of ovarian cancer cells by regulating mitochondrial ROS production, oxygen consumption and ATP generation. This study reports an important role of CBS in promoting ovarian tumor growth and maintaining drug resistant phenotype by controlling cellular redox behavior and regulating mitochondrial bioenergetics. CONCLUSION: The present investigation highlights CBS as a potential therapeutic target in relapsed and platinum resistant ovarian cancer.

  14. The high beta tokamak-extended pulse magnetohydrodynamic mode control research program

    Energy Technology Data Exchange (ETDEWEB)

    Maurer, D A; Bialek, J; Byrne, P J; De Bono, B; Levesque, J P; Li, B Q; Mauel, M E; Navratil, G A; Pedersen, T S; Rath, N; Shiraki, D [Department of Applied Physics and Applied Mathematics, Columbia University, New York, NY (United States)

    2011-07-15

    The high beta tokamak-extended pulse (HBT-EP) magnetohydrodynamic (MHD) mode control research program is studying ITER relevant internal modular feedback control coil configurations and their impact on kink mode rigidity, advanced digital control algorithms and the effects of plasma rotation and three-dimensional magnetic fields on MHD mode stability. A new segmented adjustable conducting wall has been installed on the HBT-EP and is made up of 20 independent, movable, wall shell segments instrumented with three distinct sets of 40 saddle coils, totaling 120 in-vessel modular feedback control coils. Each internal coil set has been designed with varying toroidal angular coil coverage of 5, 10 and 15{sup 0}, spanning the toroidal angle range of an ITER port plug based internal coil to test resistive wall mode (RWM) interaction and multimode MHD plasma response to such highly localized control fields. In addition, we have implemented 336 new poloidal and radial magnetic sensors to quantify the applied three-dimensional fields of our control coils along with the observed plasma response. This paper describes the design and implementation of the new control shell incorporating these control and sensor coils on the HBT-EP, and the research program plan on the upgraded HBT-EP to understand how best to optimize the use of modular feedback coils to control instability growth near the ideal wall stabilization limit, answer critical questions about the role of plasma rotation in active control of the RWM and the ferritic resistive wall mode, and to improve the performance of MHD control systems used in fusion experiments and future burning plasma systems.

  15. High isoproterenol doses are required to activate beta3-adrenoceptor-mediated functions in dogs.

    Science.gov (United States)

    Pelat, Michel; Verwaerde, Patrick; Galitzky, Jean; Lafontan, Max; Berlan, Michel; Senard, Jean-Michel; Montastruc, Jean-Louis

    2003-01-01

    The "in vivo" conditions for beta3-adrenoceptors (beta-AR) activation by isoproterenol were investigated in dog. Experiments were carried out in anesthetized dogs using isoproterenol as a nonselective beta-AR agonist. Intravenous infusion of isoproterenol (0.4 nmol/kg/min) induced arterial hypotension and tachycardia with a slight decrease in cutaneous blood flow. At this dose, isoproterenol increased glucose, glycerol, and nonesterified fatty acid plasma levels. The changes in cardiovascular and endocrine-metabolic parameters, induced by the low dose of isoproterenol, were suppressed by pretreatment with nadolol (1 mg/kg, i.v.). After nadolol administration, however, a 10-fold higher dose (4 nmol/kg/min) of isoproterenol was able to induce a decrease in arterial blood pressure with a slight tachycardia and an increase in cutaneous blood flow. This high dose of isoproterenol increased nonesterified fatty acid and glycerol plasma levels but failed to change glucose plasma levels. All these effects were abolished by a pretreatment with nadolol (1 mg/kg, i.v.) plus SR59230A [a selective beta3-adrenoceptor antagonist; (3-(2-ethylphenoxy)-1(1S)-1,2,3,4-tetrahydronaphth-1-ylaminol-(2S)2-propanol oxalate); 1 mg/kg, i.v.]. Moreover, as observed with the high dose of isoproterenol under nadolol pretreatment, an infusion of SR58611A [a selective beta3-adrenoceptor agonist; ((N2S)-7-carbethoxymethoxy-1,2,3,4-tetrahydronaphth-2-yl-(2R)-2-hydroxy-2-chlorophenyl) ethanamine hydrochloride] induces a decrease in mean arterial blood pressure associated with an increase in heart rate, cutaneous blood flow, and nonesterified fatty acid and glycerol plasma levels. These results demonstrate that the in vivo activation of beta3-adrenoceptors requires higher doses of catecholamine than those necessary for beta1- and/or beta2-adrenoceptor stimulation. These results also argue for the lack of a beta3-AR involvement in the control of heart rate and glycogenolysis in dogs.

  16. Serum concentration of transforming growth factor (TGF)-beta 1 does not predict advanced liver fibrosis in children with chronic hepatitis B.

    Science.gov (United States)

    Lebensztejn, Dariusz Marek; Sobaniec-Lotowska, Maria; Kaczmarski, Maciej; Werpachowska, Irena; Sienkiewicz, Jerzy

    2004-01-01

    The aim of the study was to evaluate if measurement of TGF-beta1 has clinical usefulness as a marker of liver fibrosis using ROC analysis and to assess its serum concentration during IFN alpha treatment. Fibrosis stage and inflammation grade were assessed according to Batts and Ludwig and Ishak et al. before and 12 months after the end of IFN alpha treatment of 30 children with chronic hepatitis B. TGF-beta1 was measured by means of the quantitative sandwich enzyme immunoassay technique using recombinant human TGF-beta soluble receptor type II as a solid phase pre-coated onto a microplate (R&D System Inc., Minneapolis, USA). There was no significant correlation between serum TGF-beta1 level and the stage of liver fibrosis. However TGF-beta1 levels in patients before IFN alpha therapy were significantly higher than in controls. IFN alpha treatment did not improve histological fibrosis during 18 months of observation and it did not cause any significant changes in serum TGF-beta1 levels although there was a tendency to decrease its level during therapy and follow-up. Serum concentration of TGF-beta1 does not predict advanced liver fibrosis in children with chronic hepatitis B.

  17. High fat programming of beta cell compensation, exhaustion, death and dysfunction.

    Science.gov (United States)

    Cerf, Marlon E

    2015-03-01

    Programming refers to events during critical developmental windows that shape progeny health outcomes. Fetal programming refers to the effects of intrauterine (in utero) events. Lactational programming refers to the effects of events during suckling (weaning). Developmental programming refers to the effects of events during both fetal and lactational life. Postnatal programming refers to the effects of events either from birth (lactational life) to adolescence or from weaning (end of lactation) to adolescence. Islets are most plastic during the early life course; hence programming during fetal and lactational life is most potent. High fat (HF) programming is the maintenance on a HF diet (HFD) during critical developmental life stages that alters progeny metabolism and physiology. HF programming induces variable diabetogenic phenotypes dependent on the timing and duration of the dietary insult. Maternal obesity reinforces HF programming effects in progeny. HF programming, through acute hyperglycemia, initiates beta cell compensation. However, HF programming eventually leads to chronic hyperglycemia that triggers beta cell exhaustion, death and dysfunction. In HF programming, beta cell dysfunction often co-presents with insulin resistance. Balanced, healthy nutrition during developmental windows is critical for preserving beta cell structure and function. Thus early positive nutritional interventions that coincide with the development of beta cells may reduce the overwhelming burden of diabetes and metabolic disease.

  18. High-resolution study of the beta decay of {sup 41}Ti

    Energy Technology Data Exchange (ETDEWEB)

    Honkanen, A. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Dendooven, P. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Huhta, M. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Lhersonneau, G. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Lipas, P.O. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Oinonen, M. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Parmonen, J.-M. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Penttilae, H. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Peraejaervi, K. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Siiskonen, T. [Jyvaeskylae Univ. (Finland). Dept. of Physics; Aeystoe, J. [Jyvaeskylae Univ. (Finland). Dept. of Physics

    1997-08-11

    An improved high-resolution study of the beta decay of {sup 41}Ti, produced in the {sup 40}Ca({sup 3}He,2n) reaction at 40 MeV, has been performed at the Ion Guide Isotope Separator On-Line (IGISOL) facility. The beta-delayed radiation was detected by a low-energy charged-particle detector and a large Ge detector for gamma rays. The experimental beta-decay strength and its distribution, extracted from delayed-proton data, are compared with results of shell-model calculations in the sdfp space. The lowest J{sup {pi}}=3/2{sup +}, T=3/2 state in {sup 41}Sc, the isobaric analogue state of the {sup 41}Ti ground state, is estimated to contain 10% isospin impurity. (orig.).

  19. MHD instabilities and their control in high-beta plasmas in KSTAR

    Energy Technology Data Exchange (ETDEWEB)

    In, Yongkyoon

    2013-02-06

    We established 3 specific tasks as follows: Task 1 - Investigate the MHD activity during the current ramp-up phase with shaped plasmas; Task 2 - Develop a theoretical model that may show the hollowness dependent instability; Task 3 - Explore the beta-limiting instabilities. To address each task, FAR-TECH actively participated in the 2012 KSTAR run-campaign, which helped us make productive progress. Specifically, the shaping dependence of MHD activity during current ramp-up phase was investigated using dedicated run-time in KSTAR (October 4 and 9, 2012), which was also attempted to address the hollowness of temperature (or pressure) profiles. Also, a performance-limiting disruption, which occurred in a relatively high intermediate beta plasma (shot 7110) in KSTAR ({beta}{sub N} ~ 1.7), was studied, and the preliminary analysis shows that the disruption might not be stability-limited but likely density-limited.

  20. Proposal for the construction of a High-Beta Tokamak at LASL

    Energy Technology Data Exchange (ETDEWEB)

    Van der Laan, P.C.T.; Freidberg, J.P.; Thomas, K.S.

    1976-06-01

    The large heating rate inherent to implosion heating allows the rapid generation of high-beta tokamak plasmas. A study of these plasmas in the proposed HBT machine can give information on how MHD equilibrium and stability limit ..beta.. and q. Both a wide current profile and a moderate elongation of the minor cross section should help to raise the permissible peak ..beta.. values in HBT to at least 20 percent. The longer term loss processes occurring in MHD-stable plasmas are to be investigated. The main parameters of HBT are: R = 0.30 m, minor cross section a racetrack of width and height 0.24 m and 0.48 m, B/sub phi/ = 2 T, I/sub phi/ approximately 750 kA.

  1. Near-equilibrium growth of thick, high quality beta-SiC by sublimation

    Science.gov (United States)

    Shields, Virgil B.; Fekade, Konjit; Spencer, Michael G.

    1993-01-01

    A close spaced near-equilibrium growth technique was used to produce thick, high quality epitaxial layers of beta-silicon carbide. The process utilized a sublimation method to grow morphologically smooth layers. The beta silicon carbide growth layers varied from about 200 to 750 microns in thickness. Chemical vapor deposition grown, 2-10 microns, beta silicon carbide films were used as seeds at 1860 and 1910 C growth temperatures. The respective average growth rates were 20 and 30 microns per hour. The layers are p-type with a 3.1 x 10 exp 17/cu cm carrier concentration. Electrical measurements indicate considerable improvement in the breakdown voltage of Schottky barriers on growth samples. Breakdown values ranged from 25 to 60 V. These measurements represent the highest values reported for 3C-SiC.

  2. Synthesis of highly magnetic iron nanoparticles suitable for field structuring using a {beta}-diketone surfactant

    Energy Technology Data Exchange (ETDEWEB)

    Huber, D.L. E-mail: dlhuber@sandia.gov; Venturini, E.L.; Martin, J.E.; Provencio, P.P.; Patel, R.J

    2004-07-01

    We describe the synthesis of highly magnetic iron nanoparticles using a novel surfactant, a {beta}-diketone. We have produced 6 nm iron nanoparticles with an unusually high saturation magnetization of more than 80% the value of bulk iron. Additionally, we measured a particle susceptibility of 14 (MKS units), which is far above the value possible for micron-scale spherical particles. These properties will allow for formation of composites that can be highly structured by magnetic fields.

  3. High-dose dosimetry of beta rays using blue beryl dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    Carmo, Lucas S. do, E-mail: lsatiro@usp.br [Instituto de Pesquisas Energeticas e Nucleares (IPEN/CNEN-SP), Sao Paulo, SP (Brazil); Watanabe, Shigueo; Bittencour, Jose F., E-mail: Lacifid@if.usp.br [Universidade de Sao Paulo (USP), Sao Paulo, SP (Brazil). Instituto de Fisica. Departamento de Fisica Nuclear

    2015-07-01

    High dose radiation is widely used in industrial applications as sterilization of medical products, improvement of materials properties, color enhancement of jewelry stones, etc. The radiation dosimetry of high doses is quite important for these applications. In this work we have investigated the usage of blue beryl crystal also known as aquamarine in high dose dosimetry of beta rays. Some works have shown that silicate minerals exhibit a good Thermoluminescent response when irradiated up to 2000 kGy of gamma rays. Here, we have produced small beryl pellets of approximately 5 mm in diameter and 3 mm thickness to measure high doses of beta rays produced at an electron accelerator at IPEN. Twelve beryl dosimeters were made and six of them were irradiated from 10kGy up to 100 kGy. The technique used to create a calibration curve was the thermoluminescence using the glow peak at 310°C. (author)

  4. Demonstration of coherent emission from high-$\\beta$ photonic crystal nanolasers at room temperature

    CERN Document Server

    Hostein, Richard; Gratiet, Luc Le; Talneau, Anne; Beaudoin, Gregoire; Robert-Philip, Isabelle; Sagnes, Isabelle; Beveratos, Alexios

    2010-01-01

    We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor beta. Lasing is confirmed by measuring the second order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at 8 times the threshold power.

  5. Demonstration of coherent emission from high-beta photonic crystal nanolasers at room temperature.

    Science.gov (United States)

    Hostein, R; Braive, R; Le Gratiet, L; Talneau, A; Beaudoin, G; Robert-Philip, I; Sagnes, I; Beveratos, A

    2010-04-15

    We report on lasing at room temperature and at telecommunications wavelength from photonic crystal nanocavities based on InAsP/InP quantum dots. Such laser cavities with a small modal volume and high quality factor display a high spontaneous emission coupling factor (beta). Lasing is confirmed by measuring the second-order autocorrelation function. A smooth transition from chaotic to coherent emission is observed, and coherent emission is obtained at eight times the threshold power.

  6. Advanced High Efficiency Durable DACS Thruster Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Systima is developing a high performance 25 lbf DACS thruster that operates with a novel non-toxic monopropellant. The monopropellant has a 30% higher...

  7. Advanced Diagnostics for High Pressure Spray Combustion.

    Energy Technology Data Exchange (ETDEWEB)

    Skeen, Scott A.; Manin, Julien Luc; Pickett, Lyle M.

    2014-06-01

    The development of accurate predictive engine simulations requires experimental data to both inform and validate the models, but very limited information is presently available about the chemical structure of high pressure spray flames under engine- relevant conditions. Probing such flames for chemical information using non- intrusive optical methods or intrusive sampling techniques, however, is challenging because of the physical and optical harshness of the environment. This work details two new diagnostics that have been developed and deployed to obtain quantitative species concentrations and soot volume fractions from a high-pressure combusting spray. A high-speed, high-pressure sampling system was developed to extract gaseous species (including soot precursor species) from within the flame for offline analysis by time-of-flight mass spectrometry. A high-speed multi-wavelength optical extinction diagnostic was also developed to quantify transient and quasi-steady soot processes. High-pressure sampling and offline characterization of gas-phase species formed following the pre-burn event was accomplished as well as characterization of gas-phase species present in the lift-off region of a high-pressure n-dodecane spray flame. For the initial samples discussed in this work several species were identified, including polycyclic aromatic hydrocarbons (PAH); however, quantitative mole fractions were not determined. Nevertheless, the diagnostic developed here does have this capability. Quantitative, time-resolved measurements of soot extinction were also accomplished and the novel use of multiple incident wavelengths proved valuable toward characterizing changes in soot optical properties within different regions of the spray flame.

  8. Optimization of {beta}-carotene loaded solid lipid nanoparticles preparation using a high shear homogenization technique

    Energy Technology Data Exchange (ETDEWEB)

    Triplett, Michael D., E-mail: triplettm@battelle.or [Battelle Memorial Institute, Health and Life Sciences Global Business (United States); Rathman, James F. [The Ohio State University, Department of Chemical and Biomolecular Engineering (United States)

    2009-04-15

    Using statistical experimental design methodologies, the solid lipid nanoparticle design space was found to be more robust than previously shown in literature. Formulation and high shear homogenization process effects on solid lipid nanoparticle size distribution, stability, drug loading, and drug release have been investigated. Experimentation indicated stearic acid as the optimal lipid, sodium taurocholate as the optimal cosurfactant, an optimum lecithin to sodium taurocholate ratio of 3:1, and an inverse relationship between mixing time and speed and nanoparticle size and polydispersity. Having defined the base solid lipid nanoparticle system, {beta}-carotene was incorporated into stearic acid nanoparticles to investigate the effects of introducing a drug into the base solid lipid nanoparticle system. The presence of {beta}-carotene produced a significant effect on the optimal formulation and process conditions, but the design space was found to be robust enough to accommodate the drug. {beta}-Carotene entrapment efficiency averaged 40%. {beta}-Carotene was retained in the nanoparticles for 1 month. As demonstrated herein, solid lipid nanoparticle technology can be sufficiently robust from a design standpoint to become commercially viable.

  9. Advanced Extremely High Frequency Satellite (AEHF)

    Science.gov (United States)

    2015-12-01

    High Frequency Satellite (AEHF) is a joint service satellite communications system that provides global , survivable, secure, protected, and jam...three satellites fully integrated into the Milstar constellation. October 2014: On October 16, 2014, the program received PEO certification for the...Combined Orbital Operation, Logistics Sustainment ( COOLS ) contract, it will be completed and coordinated in CY 2016. The AEHF system being sustained

  10. Advance Mining of Temporal High Utility Itemset

    Directory of Open Access Journals (Sweden)

    Swati Soni

    2012-04-01

    Full Text Available The stock market domain is a dynamic and unpredictable environment. Traditional techniques, such as fundamental and technical analysis can provide investors with some tools for managing their stocks and predicting their prices. However, these techniques cannot discover all the possible relations between stocks and thus there is a need for a different approach that will provide a deeper kind of analysis. Data mining can be used extensively in the financial markets and help in stock-price forecasting. Therefore, we propose in this paper a portfolio management solution with business intelligence characteristics. We know that the temporal high utility itemsets are the itemsets with support larger than a pre-specified threshold in current time window of data stream. Discovery of temporal high utility itemsets is an important process for mining interesting patterns like association rules from data streams. We proposed the novel algorithm for temporal association mining with utility approach. This make us to find the temporal high utility itemset which can generate less candidate itemsets.

  11. The addition of beta-hydroxy-beta-methylbutyrate and isomaltulose to whey protein improves recovery from highly demanding resistance exercise.

    Science.gov (United States)

    Kraemer, William J; Hooper, David R; Szivak, Tunde K; Kupchak, Brian R; Dunn-Lewis, Courtenay; Comstock, Brett A; Flanagan, Shawn D; Looney, David P; Sterczala, Adam J; DuPont, William H; Pryor, J Luke; Luk, Hiu-Ying; Maladoungdock, Jesse; McDermott, Danielle; Volek, Jeff S; Maresh, Carl M

    2015-01-01

    This study evaluated whether a combination of whey protein (WP), calcium beta-hydroxy-beta-methylbutyrate (HMB), and carbohydrate exert additive effects on recovery from highly demanding resistance exercise. Thirteen resistance-trained men (age: 22.6 ± 3.9 years; height: 175.3 ± 12.2 cm; weight: 86.2 ± 9.8 kg) completed a double-blinded, counterbalanced, within-group study. Subjects ingested EAS Recovery Protein (RP; EAS Sports Nutrition/Abbott Laboratories, Columbus, OH) or WP twice daily for 2 weeks prior to, during, and for 2 days following 3 consecutive days of intense resistance exercise. The workout sequence included heavy resistance exercise (day 1) and metabolic resistance exercise (days 2 and 3). The subjects performed no physical activity during day 4 (+24 hours) and day 5 (+48 hours), where recovery testing was performed. Before, during, and following the 3 workouts, treatment outcomes were evaluated using blood-based muscle damage markers and hormones, perceptual measures of muscle soreness, and countermovement jump performance. Creatine kinase was lower for the RP treatment on day 2 (RP: 166.9 ± 56.4 vs WP: 307.1 ± 125.2 IU · L(-1), p ≤ 0.05), day 4 (RP: 232.5 ± 67.4 vs WP: 432.6 ± 223.3 IU · L(-1), p ≤ 0.05), and day 5 (RP: 176.1 ± 38.7 vs 264.5 ± 120.9 IU · L(-1), p ≤ 0.05). Interleukin-6 was lower for the RP treatment on day 4 (RP: 1.2 ± 0.2 vs WP: 1.6 ± 0.6 pg · ml(-1), p ≤ 0.05) and day 5 (RP: 1.1 ± 0.2 vs WP: 1.6 ± 0.4 pg · ml(-1), p ≤ 0.05). Muscle soreness was lower for RP treatment on day 4 (RP: 2.0 ± 0.7 vs WP: 2.8 ± 1.1 cm, p ≤ 0.05). Vertical jump power was higher for the RP treatment on day 4 (RP: 5983.2 ± 624 vs WP 5303.9 ± 641.7 W, p ≤ 0.05) and day 5 (RP: 5792.5 ± 595.4 vs WP: 5200.4 ± 501 W, p ≤ 0.05). Our findings suggest that during times of intense conditioning, the recovery benefits of WP are enhanced with the addition of HMB and a slow-release carbohydrate. We

  12. Role of explosive instabilities in high-$\\beta$ disruptions in tokamaks

    CERN Document Server

    Aydemir, A Y; Lee, S G; Seol, J; Park, B H; In, Y K

    2016-01-01

    Intrinsically explosive growth of a ballooning finger is demonstrated in nonlinear magnetohydrodynamic calculations of high-$\\beta$ disruptions in tokamaks. The explosive finger is formed by an ideally unstable n=1 mode, dominated by an m/n=2/1 component. The quadrupole geometry of the 2/1 perturbed pressure field provides a generic mechanism for the formation of the initial ballooning finger and its subsequent transition from exponential to explosive growth, without relying on secondary processes. The explosive ejection of the hot plasma from the core and stochastization of the magnetic field occur in Alfv\\'enic time scales, accounting for the extremely fast growth of the precursor oscillations and the rapidity of the thermal quench in some high-$\\beta$ disruptions.

  13. High beta and second region stability analysis and ICRF edge modeling

    Energy Technology Data Exchange (ETDEWEB)

    1989-01-01

    This report describes the tasks accomplished under Department of Energy contract [number sign]DE-FG02-86ER53236 in modeling the edge plasma-antenna interaction that occurs during Ion Cyclotron Range of Frequency (ICRF) heating. This work has resulted in the development of several codes which determine kinetic and fluid modifications to the edge plasma. When used in combination, these code predict the level of impurity generation observed in experiments on the experiments on the Princeton Large Torus. In addition, these models suggest improvements to the design of ICRF antennas. Also described is progress made on high beta and second region analysis. Code development for a comprehensive infernal mode analysis code is nearing completion. A method has been developed for parameterizing the second region of stability and is applied to circular cross section tokamas. Various studies for high beta experimental devices such as PBX-M and DIII-D have been carried out and are reported on.

  14. Carotid intima media thickness is related positively to plasma pre beta-high density lipoproteins in non-diabetic subjects

    NARCIS (Netherlands)

    de Vries, Rindert; Perton, Frank G.; van Tol, Arie; Dullaart, Robin P. F.

    2012-01-01

    Background: Lipid-poor or lipid-free high density lipoprotein (HDL) particles, designated pre beta-HDL, stimulate removal of cell-derived cholesterol to the extracellular compartment, which is an initial step in the reverse cholesterol transport pathway. Pre beta-HDL levels may be elevated in subjec

  15. Carotid intima media thickness is related positively to plasma pre beta-high density lipoproteins in non-diabetic subjects

    NARCIS (Netherlands)

    de Vries, Rindert; Perton, Frank G.; van Tol, Arie; Dullaart, Robin P. F.

    2012-01-01

    Background: Lipid-poor or lipid-free high density lipoprotein (HDL) particles, designated pre beta-HDL, stimulate removal of cell-derived cholesterol to the extracellular compartment, which is an initial step in the reverse cholesterol transport pathway. Pre beta-HDL levels may be elevated in

  16. Pre-beta-HDL formation relates to high-normal free thyroxine in type 2 diabetes mellitus

    NARCIS (Netherlands)

    Tienhoven-Wind, van Lynnda; Perton, Frank G.; Dullaart, Robin P. F.

    Objectives: Low-normal thyroid function within the euthyroid range may influence plasma lipoprotein levels. Associations between variation in thyroid function and pre-beta-high density lipoproteins (pre-beta-HDL), i.e. lipid-poor or lipid free HDL particles that act as initial acceptor of

  17. Peculiarities of high-temperature. beta. -phase formation during rapid heating of titanium-molybdenum alloys

    Energy Technology Data Exchange (ETDEWEB)

    Gridnev, V.N.; Zhuravlev, A.F.; Zhuravlev, B.F.; Ivasishin, O.M.; Oshkaderov, S.P. (AN Ukrainskoj SSR, Kiev. Inst. Metallofiziki)

    1983-11-01

    In the framework of the diffusion mechanism of ..cap alpha..+..beta.. ..-->.. ..beta.. transformation the model for calculating interface location determining the degree of transformation and concentration of the formed ..beta..-phase during continuous heating under different rates in titanium alloys with ..beta..-isomorphous alloying elements is suggested. On the example of Ti-10% Mo alloy the comparison of calculation and experimental results of determining parameters of ..cap alpha..+..beta.. ..-->.. ..beta.. transformation is performed.

  18. High-statistics measurement of the {beta} -delayed {alpha} spectrum of {sup 20}Na

    Energy Technology Data Exchange (ETDEWEB)

    Laursen, K.L.; Fynbo, H.O.U.; Riisager, K. [Aarhus University, Department of Physics and Astronomy, Aarhus (Denmark); Kirsebom, O.S. [Aarhus University, Department of Physics and Astronomy, Aarhus (Denmark); TRIUMF, Vancouver, BC (Canada); Jokinen, A.; Saastamoinen, A.; Aeystoe, J. [University of Jyvaeskylae, Department of Physics, Jyvaeskylae (Finland); Madurga, M. [Instituto de Estructura de la Materia, CSIC, Madrid (Spain); Department of Physics and Astronomy, University of Tennessee, Knoxville, TN (United States); Tengblad, O. [Instituto de Estructura de la Materia, CSIC, Madrid (Spain)

    2013-06-15

    A measurement of the {sup 20}Na {beta} -delayed alpha spectrum with a high-granularity setup has allowed the decay scheme to be revised on several points. Three new transitions of low intensity are found at low {alpha} -particle energy. An R-matrix fit of the complete spectrum gives an improved description of the decay and indicates feeding to the broad 2{sup +} {alpha} -cluster state close to 9MeV. (orig.)

  19. Collisionless shock waves in space - A very high beta structure. [solar wind measurements

    Science.gov (United States)

    Formisano, V.; Russell, C. T.; Means, J. D.; Greenstadt, E. W.; Scarf, F. L.; Neugebauter, M.

    1975-01-01

    Measurements from six OGO-5 particle and field experiments are used to examine the structure of the earth's bow shock during a period of extremely high beta (the ratio of plasma thermal to magnetic energy density), as determined from simultaneous measurements of the upstream plasma on board the HEOS satellite. Even though the interplanetary field is nearly perpendicular to the shock normal, the shock is extremely turbulent. Large field increases are observed up to a factor of 20 above the upstream values. Ahead of these large enhancements, smaller magnetic effects accompanied by electrostatic noise, electron heating, and ion deflection are observed for several minutes. These observations suggest that a steady-state shock may not be able to form at very high beta. Further, they show that while the magnetic energy density may be relatively unimportant in the upstream flow, it can become very significant within the shock structure, and hence the magnetic field should not be ignored in theoretical treatments of very high beta shocks.

  20. High power infrared QCLs: advances and applications

    Science.gov (United States)

    Patel, C. Kumar N.

    2012-01-01

    QCLs are becoming the most important sources of laser radiation in the midwave infrared (MWIR) and longwave infrared (LWIR) regions because of their size, weight, power and reliability advantages over other laser sources in the same spectral regions. The availability of multiwatt RT operation QCLs from 3.5 μm to >16 μm with wall plug efficiency of 10% or higher is hastening the replacement of traditional sources such as OPOs and OPSELs in many applications. QCLs can replace CO2 lasers in many low power applications. Of the two leading groups in improvements in QCL performance, Pranalytica is the commercial organization that has been supplying the highest performance QCLs to various customers for over four year. Using a new QCL design concept, the non-resonant extraction [1], we have achieved CW/RT power of >4.7 W and WPE of >17% in the 4.4 μm - 5.0 μm region. In the LWIR region, we have recently demonstrated QCLs with CW/RT power exceeding 1 W with WPE of nearly 10 % in the 7.0 μm-10.0 μm region. In general, the high power CW/RT operation requires use of TECs to maintain QCLs at appropriate operating temperatures. However, TECs consume additional electrical power, which is not desirable for handheld, battery-operated applications, where system power conversion efficiency is more important than just the QCL chip level power conversion efficiency. In high duty cycle pulsed (quasi-CW) mode, the QCLs can be operated without TECs and have produced nearly the same average power as that available in CW mode with TECs. Multiwatt average powers are obtained even in ambient T>70°C, with true efficiency of electrical power-to-optical power conversion being above 10%. Because of the availability of QCLs with multiwatt power outputs and wavelength range covering a spectral region from ~3.5 μm to >16 μm, the QCLs have found instantaneous acceptance for insertion into multitude of defense and homeland security applications, including laser sources for infrared

  1. Advanced Polymeric Materials for High-tech Innovations

    Institute of Scientific and Technical Information of China (English)

    TANG; BenZhong

    2001-01-01

    High technology is advancing our society and modernizing our life and advanced materials play an important role in the technological innovations. My research group has been working on the development of advanced polymeric materials and in this talk I will report our recent work on the creation of new conjugated polymers with novel molecular structures and unique materials properties.1-18 Our work include the design of molecular structures of monomeric building blocks, development of stable, effective and environmentally benign "green” polymerization catalysts, discovery of new polymerization reactions, synthesis of functional macromolecules, fabrication of nanodimensional composites, assembly and control of hierarchical structures, and construction of electrooptical devices. We have revealed the liquid crystallinity, light emission, photoconductivity, optical limiting, nano-hybridization, solvatochromism, optical activity, self-organization, and biological activity of the linear polyacetylenes and hyperbranched polyarylenes. The utilization of the advanced polymers and their interesting materials properties for high-tech innovations will be discussed.  ……

  2. Advanced Polymeric Materials for High-tech Innovations

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ High technology is advancing our society and modernizing our life and advanced materials play an important role in the technological innovations. My research group has been working on the development of advanced polymeric materials and in this talk I will report our recent work on the creation of new conjugated polymers with novel molecular structures and unique materials properties.1-18 Our work include the design of molecular structures of monomeric building blocks, development of stable, effective and environmentally benign "green” polymerization catalysts, discovery of new polymerization reactions, synthesis of functional macromolecules, fabrication of nanodimensional composites, assembly and control of hierarchical structures, and construction of electrooptical devices. We have revealed the liquid crystallinity, light emission, photoconductivity, optical limiting, nano-hybridization, solvatochromism, optical activity, self-organization, and biological activity of the linear polyacetylenes and hyperbranched polyarylenes. The utilization of the advanced polymers and their interesting materials properties for high-tech innovations will be discussed.

  3. Oat beta-glucan ameliorates insulin resistance in mice fed on high-fat and high-fructose diet

    Directory of Open Access Journals (Sweden)

    Jie Zheng

    2013-12-01

    Full Text Available Methods: This study sought to evaluate the impact of oat beta-glucan on insulin resistance in mice fed on high-fat and high-fructose diet with fructose (10%, w/v added in drinking water for 10 weeks. Results: The results showed that supplementation with oat beta-glucan could significantly reduce the insulin resistance both in low-dose (200 mg/kg−1 body weight and high-dose (500 mg/kg−1 body weight groups, but the high-dose group showed a more significant improvement in insulin resistance (P<0.01 compared with model control (MC group along with significant improvement in hepatic glycogen level, oral glucose, and insulin tolerance. Moreover, hepatic glucokinase activity was markedly enhanced both in low-dose and high-dose groups compared with that of MC group (P<0.05. Conclusion: These results suggested that supplementation of oat beta-glucan alleviated insulin resistance and the effect was dose dependent.

  4. High performance installation for drill and blast advance Mitholz, Switzerland

    Institute of Scientific and Technical Information of China (English)

    Jost Wenk

    2004-01-01

    The section Mitholz of the L tschberg Alp - Transit tunnel consists basically of 3 drill & blast advances with a cross section of 63 - 69m2 and a total length of 25 km.The high - performance back - up installation in use distinguishes itself by the following substantial innovations:The joint venture SATCO ( STRABAG AG, Rothpletz, Lienhard & Cie. , Walo Bertschinger AG, Vinci Construction,Skanska Europe AB), the c ontractor in charge, is achieving very high rates of advance, thanks to the high - performance back - up installations.- The chosen heading system has a positive effect on the entire construction program. Supplementary work can be done within the planned time schedule - Owing to the excellent performance, the joint venture SATCO is ahead on the construction program by about 700m.- The high rates of advance result for the customer in a positive return on investment - The installed equipment results in a higher safety at the workplace for the workers

  5. Double-beta decay investigation with highly pure enriched {sup 82}Se for the LUCIFER experiment

    Energy Technology Data Exchange (ETDEWEB)

    Beeman, J.W. [Lawrence Berkeley National Laboratory, Berkeley, CA (United States); Bellini, F.; Casali, N.; Ferroni, F.; Piperno, G. [Sapienza Universita di Roma, Dipartimento di Fisica, Rome (Italy); INFN, Sezione di Roma, Rome (Italy); Benetti, P. [Universita di Pavia, Dipartimento di Chimica, Pavia (Italy); INFN, Sezione di Pavia, Pavia (Italy); Cardani, L. [Sapienza Universita di Roma, Dipartimento di Fisica, Rome (Italy); Princeton University, Physics Department, Princeton, NJ (United States); Chiesa, D.; Clemenza, M.; Gironi, L.; Maino, M. [Universita di Milano-Bicocca, Dipartimento di Fisica, Milan (Italy); INFN, Sezione di Milano Bicocca, Milan (Italy); Dafinei, I.; Orio, F.; Tomei, C.; Vignati, M. [INFN, Sezione di Roma, Rome (Italy); Di Domizio, S. [INFN, Sezione di Genova, Genoa (Italy); Universita di Genova, Dipartimento di Fisica, Genoa (Italy); Giuliani, A. [Centre de Spectrometrie de Masse, Orsay (France); Gotti, C.; Pessina, G.; Previtali, E.; Rusconi, C. [INFN, Sezione di Milano Bicocca, Milan (Italy); Laubenstein, M.; Nisi, S.; Pattavina, L.; Pirro, S.; Schaeffner, K. [INFN, Laboratori Nazionali del Gran Sasso, Assergi (L' Aquila) (Italy); Nagorny, S.; Pagnanini, L. [Gran Sasso Science Institute, L' Aquila (Italy); Nones, C. [SPP Centre de Saclay, CEA, Irfu, Gif-sur-Yvette (France)

    2015-12-15

    The LUCIFER project aims at deploying the first array of enriched scintillating bolometers for the investigation of neutrinoless double-beta decay of {sup 82}Se. The matrix which embeds the source is an array of ZnSe crystals, where enriched {sup 82}Se is used as decay isotope. The radiopurity of the initial components employed for manufacturing crystals, that can be operated as bolometers, is crucial for achieving a null background level in the region of interest for double-beta decay investigations. In this work, we evaluated the radioactive content in 2.5 kg of 96.3 % enriched {sup 82}Se metal, measured with a high-purity germanium detector at the Gran Sasso deep underground laboratory. The limits on internal contaminations of primordial decay chain elements of {sup 232}Th, {sup 238}U and {sup 235}U are respectively: <61, <110 and <74 μBq/kg at 90 % C.L. The extremely low-background conditions in which the measurement was carried out and the high radiopurity of the {sup 82}Se allowed us to establish the most stringent lower limits on the half-lives of the double-beta decay of {sup 82}Se to 0{sub 1}{sup +}, 2{sub 2}{sup +} and 2{sub 1}{sup +} excited states of {sup 82}Kr of 3.4.10{sup 22}, 1.3.10{sup 22} and 1.0.10{sup 22} y, respectively, with a 90 % C.L. (orig.)

  6. Double-beta decay investigation with highly pure enriched {sup 82}Se for the LUCIFER experiment

    Energy Technology Data Exchange (ETDEWEB)

    Beeman, J. W. [Lawrence Berkeley National Laboratory, 94720, Berkeley, CA (United States); Bellini, F. [Dipartimento di Fisica, Sapienza Università di Roma, 00185, Rome (Italy); INFN, Sezione di Roma, 00185, Rome (Italy); Benetti, P. [Dipartimento di Chimica, Università di Pavia, 27100, Pavia (Italy); INFN, Sezione di Pavia, 27100, Pavia (Italy); Cardani, L. [Dipartimento di Fisica, Sapienza Università di Roma, 00185, Rome (Italy); Physics Department, Princeton University, 08544, Princeton, NJ (United States); Casali, N. [Dipartimento di Fisica, Sapienza Università di Roma, 00185, Rome (Italy); INFN, Sezione di Roma, 00185, Rome (Italy)

    2015-12-13

    The LUCIFER project aims at deploying the first array of enriched scintillating bolometers for the investigation of neutrinoless double-beta decay of {sup 82}Se. The matrix which embeds the source is an array of ZnSe crystals, where enriched {sup 82}Se is used as decay isotope. The radiopurity of the initial components employed for manufacturing crystals, that can be operated as bolometers, is crucial for achieving a null background level in the region of interest for double-beta decay investigations. In this work, we evaluated the radioactive content in 2.5 kg of 96.3 % enriched {sup 82}Se metal, measured with a high-purity germanium detector at the Gran Sasso deep underground laboratory. The limits on internal contaminations of primordial decay chain elements of {sup 232}Th, {sup 238}U and {sup 235}U are respectively: <61, <110 and <74 μBq/kg at 90 % C.L. The extremely low-background conditions in which the measurement was carried out and the high radiopurity of the {sup 82}Se allowed us to establish the most stringent lower limits on the half-lives of the double-beta decay of {sup 82}Se to 0{sub 1}{sup +}, 2{sub 2}{sup +} and 2{sub 1}{sup +} excited states of {sup 82}Kr of 3.4·10{sup 22}, 1.3·10{sup 22} and 1.0·10{sup 22} y, respectively, with a 90 % C.L.

  7. Multianvil high-pressure synthesis and crystal structure of {beta}-YbBO{sub 3}

    Energy Technology Data Exchange (ETDEWEB)

    Huppertz, H. [Muenchen Univ. (Germany). Dept. Chemie

    2001-08-01

    {beta}-Ytterbium borate ({beta}-YbBO{sub 3}) was synthesized under high-pressure in a Walker-type multianvil apparatus at 2.2 GPa and 1400 C. The title-compound crystallizes in the trigonal calcite structure, space group R anti 3c. Single crystal X-ray data yielded a = 492.1(2), c = 1630.5(9) pm, wR2 = 0.0344 for 165 F{sup 2} values and 11 variable parameters. Within the trigonal planar BO{sub 3} groups the B-O distance is 137.8(4) pm. The ytterbium atoms have a slightly distorted octahedral oxygen coordination (Yb-O: 224.4(2) pm). (orig.)

  8. Electromagnetic stabilization of tokamak microturbulence in a high-$\\beta$ regime

    CERN Document Server

    Citrin, J; Goerler, T; Jenko, F; Mantica, P; Told, D; Bourdelle, C; Hatch, D R; Hogeweij, G M D; Johnson, T; Pueschel, M J; Schneider, M

    2014-01-01

    The impact of electromagnetic stabilization and flow shear stabilization on ITG turbulence is investigated. Analysis of a low-$\\beta$ JET L-mode discharge illustrates the relation between ITG stabilization, and proximity to the electromagnetic instability threshold. This threshold is reduced by suprathermal pressure gradients, highlighting the effectiveness of fast ions in ITG stabilization. Extensive linear and nonlinear gyrokinetic simulations are then carried out for the high-$\\beta$ JET hybrid discharge 75225, at two separate locations at inner and outer radii. It is found that at the inner radius, nonlinear electromagnetic stabilization is dominant, and is critical for achieving simulated heat fluxes in agreement with the experiment. The enhancement of this effect by suprathermal pressure also remains significant. It is also found that flow shear stabilization is not effective at the inner radii. However, at outer radii the situation is reversed. Electromagnetic stabilization is negligible while the flow...

  9. Friction Stir Spot Welding of Advanced High Strength Steels

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Grant, Glenn J.; Santella, M. L.

    2009-11-13

    Friction stir spot welding techniques were developed to successfully join several advanced high strength steels. Two distinct tool materials were evaluated to determine the effect of tool materials on the process parameters and joint properties. Welds were characterized primarily via lap shear, microhardness, and optical microscopy. Friction stir spot welds were compared to the resistance spot welds in similar strength alloys by using the AWS standard for resistance spot welding high strength steels. As further comparison, a primitive cost comparison between the two joining processes was developed, which included an evaluation of the future cost prospects of friction stir spot welding in advanced high strength steels.

  10. High frequency of beta-catenin heterozygous mutations in extra-abdominal fibromatosis: a potential molecular tool for disease management.

    Science.gov (United States)

    Dômont, J; Salas, S; Lacroix, L; Brouste, V; Saulnier, P; Terrier, P; Ranchère, D; Neuville, A; Leroux, A; Guillou, L; Sciot, R; Collin, F; Dufresne, A; Blay, J-Y; Le Cesne, A; Coindre, J-M; Bonvalot, S; Bénard, J

    2010-03-16

    Fibromatosis comprises distinct clinical entities, including sporadic extra-abdominal fibromatosis, which have a high tendency for recurrence, even after adequate resection. There are no known molecular biomarkers of local recurrence. We searched for beta-catenin mutations in a European multicentre series of fibromatosis tumours to relate beta-catenin mutational status to disease outcome. Direct sequencing of exon 3 beta-catenin gene was performed for 155 frozen fibromatosis tissues from all topographies. Correlation of outcome with mutation rate and type was performed on the extra-abdominal fibromatosis group (101 patients). Mutations of beta-catenin were detected in 83% of all cases. Among 101 extra-abdominal fibromatosis, similar mutation rates (87%) were observed, namely T41A (39.5%), S45P (9%), S45F (36.5%), and deletion (2%). None of the clinico-pathological parameters were found to be significantly associated with beta-catenin mutational status. With a median follow-up of 62 months, 51 patients relapsed. Five-year recurrence-free survival was significantly worse in beta-catenin-mutated tumours regardless of a specific genotype, compared with wild-type tumours (49 vs 75%, respectively, P=0.02). A high frequency (87%) of beta-catenin mutation hallmarks extra-abdominal fibromatosis from a large multicentric retrospective study. Moreover, wild-type beta-catenin seems to be an interesting prognostic marker that might be useful in the therapeutic management of extra-abdominal fibromatosis.

  11. Recent Advances in the Synthesis of High Explosive Materials

    Directory of Open Access Journals (Sweden)

    Jesse J. Sabatini

    2015-12-01

    Full Text Available This review discusses the recent advances in the syntheses of high explosive energetic materials. Syntheses of some relevant modern primary explosives and secondary high explosives, and the sensitivities and properties of these molecules are provided. In addition to the synthesis of such materials, processing improvement and formulating aspects using these ingredients, where applicable, are discussed in detail.

  12. Recent Advances in the Synthesis of High Explosive Materials

    OpenAIRE

    Jesse J. Sabatini; Karl D. Oyler

    2015-01-01

    This review discusses the recent advances in the syntheses of high explosive energetic materials. Syntheses of some relevant modern primary explosives and secondary high explosives, and the sensitivities and properties of these molecules are provided. In addition to the synthesis of such materials, processing improvement and formulating aspects using these ingredients, where applicable, are discussed in detail.

  13. High-energy diffraction microscopy at the advanced photon source

    DEFF Research Database (Denmark)

    Lienert, U.; Li, S. F.; Hefferan, C. M.

    2011-01-01

    The status of the High Energy Diffraction Microscopy (HEDM) program at the 1-ID beam line of the Advanced Photon Source is reported. HEDM applies high energy synchrotron radiation for the grain and sub-grain scale structural and mechanical characterization of polycrystalline bulk materials in situ...

  14. TGF-beta as a therapeutic target in high grade gliomas - Promises and challenges

    NARCIS (Netherlands)

    Joseph, Justin V.; Balasubramaniyan, Veerakumar; Walenkamp, Annemiek; Kruyt, Frank A. E.

    2013-01-01

    Transforming growth factor-beta (TGF-beta) is a cytokine with a key role in tissue homeostasis and cancer. TGF-beta elicits both tumor suppressive and tumor promoting functions during cancer progression, in a wide range of cancers. Here, we review the tumor promoting function of TGF-beta and its pos

  15. Topologically heterogeneous beta cell adaptation in response to high-fat diet in mice

    NARCIS (Netherlands)

    Ellenbroek, J.H.; Tons, H.A.; de Graaf, N.; Loomans, C.J.; Engelse, M.A.; Vrolijk, H.; Voshol, P.J.; Rabelink, T.J.; Carlotti, F.; de Koning, E.J.

    2013-01-01

    AIMS: Beta cells adapt to an increased insulin demand by enhancing insulin secretion via increased beta cell function and/or increased beta cell number. While morphological and functional heterogeneity between individual islets exists, it is unknown whether regional differences in beta cell adaptati

  16. Design study of a beta=0.09 high current superconducting half wave resonator

    CERN Document Server

    Zhong, Hu-Tan-Xiang; Fan, Pei-Liang; Quan, Sheng-Wen; Liu, Ke-Xin

    2016-01-01

    There's presently a growing demand for high current proton and deuteron linear accelerators based on superconducting technology to better support various fields of science. A \\b{eta}=0.09 162.5 MHz high current superconducting half wave resonator (HWR) has been designed at Peking University to accelerate 100 mA proton beam or 50 mA deuteron beam after the RFQ accelerating structure. The detailed electromagnetic design, multipacting simulation, mechanical analysis of the cavity will be given in this paper.

  17. Advanced Time-Delayed Coincidence Studies of $^{31,32}$Mg from the $\\beta$-decays of $^{31,32}$Na

    CERN Multimedia

    Marechal, F; Plociennik, W A

    2002-01-01

    It is proposed to study the lifetime of the 2$_{1}^{+}$ 885.4 keV state in $^{32}$Mg by means of Advanced Time-Delayed $\\beta \\gamma \\gamma$(t) method with the precision in the half-life value of about $\\pm$ 1.5 ps. This would be an independent verification of the B(E2; 0$_{1}^{+} \\rightarrow$ 2$_{1}^{+}$) values obtained so far in a few studies using Coulomb excitations at intermediate beam energies. The advantage of time-delayed coincidence measurements is that they are free of corrections used in the Coulex studies, which strongly affect the deduced B(E2) results. In addition, we propose to study the lifetimes or lifetime limits of other states in nuclei populated in the decays of $^{31}$Na and $^{32}$Na, specifically focusing on the intruder negative parity band in $^{31}$Mg. As a side benefit to this investigation we expect high-quality $\\gamma \\gamma$ coincidences to reveal new excited states in both $^{31}$Mg and $^{32}$Mg. Our results from a brief test-measurement yield a lifetime of T$_{1/2}$ = 10.5(...

  18. Beta processes in a high-temperature field and nuclear multibeta decays

    Energy Technology Data Exchange (ETDEWEB)

    Kopytin, I. V., E-mail: kopytin@yandex.ru; Hussain, Imad A. [Voronezh State University (Russian Federation)

    2013-11-15

    Sources of the temperature dependence of rates of nuclear beta processes in matter of massive stars are systematized. Electron and positron beta decays and electron capture (K capture and the capture of unbound electrons) fromexcited nuclear states (thermal decays) are considered along with the photobeta decays from ground and excited nuclear states. The possible quantum degeneracy of an electron gas in matter and the degree of ionization of an atomic K shell in a high-temperature field are taken into account. For a number of multidecay odd-nuclei, the temperature dependences of the ratios of the total rates of their {beta}{sup -} decays to the sum of the total rates over all of decay modes for the same nuclei are calculated in the range of nuclear temperature from 2 to 3 Multiplication-Sign 10{sup 9} K. It is shown that the deviation of this ratio from the experimental value obtained at 'normal' temperature may be quite sizable. This circumstance should be taken into account in models that consider the problem of synthesis of nuclei in matter of massive stars.

  19. High plasma concentration of beta-D-glucan after administration of sizofiran for cervical cancer

    Directory of Open Access Journals (Sweden)

    Hirokazu Tokuyasu

    2010-09-01

    Full Text Available Hirokazu Tokuyasu1, Kenichi Takeda1, Yuji Kawasaki1, Yasuto Sakaguchi2, Noritaka Isowa2, Eiji Shimizu3, Yasuto Ueda31Divisions of Respiratory Medicine, 2Thoracic Surgery, Matsue Red Cross Hospital, 200 Horomachi, Matsue, Shimane; 3Division of Medical Oncology and Molecular Respirology, Department of Multidisciplinary Internal Medicine, Faculty of Medicine, Tottori University, Yonago, JapanAbstract: A 69-year-old woman with a history of cervical cancer was admitted to our hospital for further investigation of abnormal shadows on her chest roentgenogram. Histologic examination of transbronchial lung biopsy specimens revealed epithelioid cell granuloma, and Mycobacterium intracellulare was detected in the bronchial lavage fluid. The plasma level of (1→3-beta-D-glucan was very high, and this elevated level was attributed to administration of sizofiran for treatment of cervical cancer 18 years previously. Therefore, in patients with cervical cancer, it is important to confirm whether or not sizofiran has been administered before measuring (1→3-beta-D-glucan levels.Keywords: (1→3-beta-D-glucan, cervical cancer, Mycobacterium intracellulare, sizofiran

  20. Suppression of diamagnetism by neutrals pressure in partially ionized, high-beta plasma

    Science.gov (United States)

    Shinohara, Shunjiro; Kuwahara, Daisuke; Yano, Kazuki; Fruchtman, Amnon

    2016-12-01

    Suppression of diamagnetism in a partially ionized plasma with high beta was experimentally investigated by the use of Langmuir and Hall sensor probes, focusing on a neutrals pressure effect. The plasma beta, which is the ratio of plasma to vacuum magnetic pressures, varied from ˜1% to >100% while the magnetic field varied from ˜120 G to ˜1 G. Here, a uniform magnetized argon plasma was operated mostly in an inductive mode, using a helicon plasma source of the Large Helicon Plasma Device [S. Shinohara et al., Phys. Plasmas 16, 057104 (2009)] with a diameter of 738 mm and an axial length of 4860 mm. Electron density varied from 5 × 1015 m-3 to power of 7 MHz and ˜3.5 kW, respectively. The observed magnetic field reduction rate, a decrease of the magnetic field divided by the vacuum one, was up to 18%. However, in a certain parameter regime, where the product of ion and electron Hall terms is a key parameter, the measured diamagnetic effect was smaller than that expected by the plasma beta. This suppressed diamagnetism is explained by the neutrals pressure replacing magnetic pressure in balancing plasma pressure. Diamagnetism is weakened if neutrals pressure is comparable to the plasma pressure and if the coupling of plasma and neutrals pressures by ion-neutral collisions is strong enough.

  1. 76 FR 48169 - Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices...

    Science.gov (United States)

    2011-08-08

    ... following public meeting: ``Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical... microbiology/MCM devices. The ultimate goal is to advance regulatory science for highly multiplexed devices... HUMAN SERVICES Food and Drug Administration Advancing Regulatory Science for Highly...

  2. 76 FR 71982 - Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices...

    Science.gov (United States)

    2011-11-21

    ... paper entitled ''Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure... the ``Advancing Regulatory Science for Highly Multiplexed Microbiology/Medical Countermeasure Devices... HUMAN SERVICES Food and Drug Administration Advancing Regulatory Science for Highly...

  3. Contribution of Neutron Beta Decay to Radiation Belt Pumping from High Altitude Nuclear Explosion

    Energy Technology Data Exchange (ETDEWEB)

    Marrs, R

    2002-11-13

    In 1962, several satellites were lost following high altitude nuclear tests by the United States and the Soviet Union. These satellite failures were caused by energetic electrons injected into the earth's radiation belts from the beta decay of bomb produced fission fragments and neutrons. It has been 40 years since the last high altitude nuclear test; there are now many more satellites in orbit, and it is important to understand their vulnerability to radiation belt pumping from nuclear explosions at high altitude or in space. This report presents the results of a calculation of the contribution of neutron beta decay to artificial belt pumping. For most high altitude nuclear explosions, neutrons are expected to make a smaller contribution than fission products to the total trapped electron inventory, and their contribution is usually neglected. However, the neutron contribution may dominate in cases where the fission product contribution is suppressed due to the altitude or geomagnetic latitude of the nuclear explosion, and for regions of the radiation belts with field lines far from the detonation point. In any case, an accurate model of belt pumping from high altitude nuclear explosions, and a self-consistent explanation of the 1962 data, require inclusion of the neutron contribution. One recent analysis of satellite measurements of electron flux from the 1962 tests found that a better fit to the data is obtained if the neutron contribution to the trapped electron inventory was larger than that of the fission products [l]. Belt pumping from high altitude nuclear explosions is a complicated process. Fission fragments are dispersed as part of the ionized bomb debris, which is constrained and guided by the earth's magnetic field. Those fission products that beta decay before being lost to the earth's atmosphere can contribute trapped energetic electrons to the earth's radiation belts. There has been a large effort to develop computer models for

  4. 胰岛β细胞葡萄糖毒性分子机制的研究进展%Advances in molecular mechanisms of pancreatic beta-cell glucotoxicity

    Institute of Scientific and Technical Information of China (English)

    张珊珊; 吴木潮

    2013-01-01

    The deterioration of beta-cell function and survival caused by chronic high glucose exposure is termed glucotoxicity.The mechanisms of pancreatic beta-cell glucotoxicity involve in oxidative stress,endoplasmic reticulum stress,mitochrondrial dysfunction,inflammation,advanced glycation end products,hypoxia and activation of HIF-1 α,and loss of differentiation in the alteration of beta-cell phenotype.The role of oxidative stress,endoplasmic reticulum stress,and loss of differentiation in the alteration of beta-cell phenotype is well ascertained.Oxidative stress is the central mechanism for glucotoxicity in pancreatic beta cells in diabetes.%慢性高糖可损伤胰岛β细胞,这被称为“葡萄糖毒性”.胰岛β细胞葡萄糖毒性涉及多种机制包括氧化应激、内质网应激、线粒体功能失调、炎症、糖基化终末产物形成、低氧状态与低氧诱导因子激活、胰岛β细胞分化表型丧失,等等.目前认为,氧化应激、内质网应激和胰岛β细胞分化表型的丧失在胰岛β细胞葡萄糖毒性中的作用较为明确;其中氧化应激在糖尿病胰岛β细胞葡萄糖毒性中发挥中心性作用.

  5. Highly mesoporous single-crystalline zeolite beta synthesized using a nonsurfactant cationic polymer as a dual-function template

    KAUST Repository

    Zhu, Jie

    2014-02-12

    Mesoporous zeolites are useful solid catalysts for conversion of bulky molecules because they offer fast mass transfer along with size and shape selectivity. We report here the successful synthesis of mesoporous aluminosilicate zeolite Beta from a commercial cationic polymer that acts as a dual-function template to generate zeolitic micropores and mesopores simultaneously. This is the first demonstration of a single nonsurfactant polymer acting as such a template. Using high-resolution electron microscopy and tomography, we discovered that the resulting material (Beta-MS) has abundant and highly interconnected mesopores. More importantly, we demonstrated using a three-dimensional electron diffraction technique that each Beta-MS particle is a single crystal, whereas most previously reported mesoporous zeolites are comprised of nanosized zeolitic grains with random orientations. The use of nonsurfactant templates is essential to gaining single-crystalline mesoporous zeolites. The single-crystalline nature endows Beta-MS with better hydrothermal stability compared with surfactant-derived mesoporous zeolite Beta. Beta-MS also exhibited remarkably higher catalytic activity than did conventional zeolite Beta in acid-catalyzed reactions involving large molecules. © 2014 American Chemical Society.

  6. Recent Advances in Ultra-High-Speed Optical Signal Processing

    DEFF Research Database (Denmark)

    Mulvad, Hans Christian Hansen; Palushani, Evarist; Hu, Hao;

    2012-01-01

    We review recent advances in the optical signal processing of ultra-high-speed serial data signals up to 1.28 Tbit/s, with focus on applications of time-domain optical Fourier transformation. Experimental methods for the generation of symbol rates up to 1.28 Tbaud are also described....

  7. Experiences of Advanced High School Students in Synchronous Online Recitations

    Science.gov (United States)

    Mayer, Greg; Lingle, Jeremy; Usselman, Marion

    2017-01-01

    The question of how to best design an online course that promotes student-centred learning is an area of ongoing research. This mixed-methods study focused on a section of advanced high school students, in college-level mathematics courses, that used a synchronous online environment mediated over web-conferencing software, and whether the…

  8. Friction Stir Spot Welding of Advanced High Strength Steels

    Energy Technology Data Exchange (ETDEWEB)

    Santella, M. L.; Hovanski, Yuri; Grant, Glenn J.; Carpenter, Joseph A.; Warren, C. D.; Smith, Mark T.

    2008-12-28

    Experiments are continuing to evaluate the feasibility of friction stir spot welding advanced high-strength steels including, DP780, martensitic hot-stamp boron steel, and TRIP steels. Spot weld lap-shear strengths can exceed those required by industry standards such as AWS D8.1.

  9. High-pressure X-ray diffraction studies on {beta}-Ni(OH){sub 2}

    Energy Technology Data Exchange (ETDEWEB)

    Garg, Nandini; Karmakar, S.; Sharma, S.M.Surinder M.; Busseto, E.; Sikka, S.K

    2004-06-15

    Using in situ X-ray diffraction, we have investigated the high-pressure behavior of {beta}-Ni(OH){sub 2} upto 10 GPa. No phase transformation was observed in this pressure range. Our studies show that the diffraction peaks show inherent broadening on increase of pressure. This suggests that H-lattice may be already disordered at ambient conditions and further increase in pressure may increase the lattice disorder as observed in Co(OH){sub 2} (Phys. Rev. B 66 (2002) 134301)

  10. Chromobacterium spp. harbour Ambler class A beta-lactamases showing high identity with KPC

    DEFF Research Database (Denmark)

    Gudeta, Dereje Dadi; Bortolaia, Valeria; Jayol, Aurelie

    2016-01-01

    Objectives: The origin of KPC is unknown. The aim of this study was to detect progenitors of KPC in silico and to functionally verify their beta-lactam hydrolysis activity. Methods: The sequence of KPC-2 was used to mine the NCBI protein sequence database. The best non-KPC hits were analysed by a......-lactamases with up to 76% aa identity to KPC from distinct Chromobacterium species is highly indicative of the role played by this genus in the evolution of KPC....

  11. Unpredictability of intravenous busulfan pharmacokinetics in children undergoing hematopoietic stem cell transplantation for advanced beta thalassemia: limited toxicity with a dose-adjustment policy.

    Science.gov (United States)

    Chiesa, Robert; Cappelli, Barbara; Crocchiolo, Roberto; Frugnoli, Ilaria; Biral, Erika; Noè, Anna; Evangelio, Costanza; Fossati, Marco; Roccia, Tito; Biffi, Alessandra; Finizio, Valentina; Aiuti, Alessandro; Broglia, Monica; Bartoli, Antonella; Ciceri, Fabio; Roncarolo, Maria Grazia; Marktel, Sarah

    2010-05-01

    beta-thalassemia is a major health problem worldwide, and stem cell transplantation (SCT) is the only curative option. Oral Busulfan (Bu) based conditioning is widely used in this setting. Due to the variability of Bu systemic exposure, intravenous (i.v.) Bu has been proposed as a standard of care, with no need for drug monitoring and dose adjustment. Patients with beta-thalassemia from countries with limited resources might be at higher risk of erratic Bu metabolism because of liver dysfunction, severe iron overload, and specific ethnic/genetic features. We studied Bu pharmacokinetics in 53 children with advanced beta-thalassemia from Middle Eastern countries who underwent a total of 57 matched related donor SCTs. Forty-two percent of the children required dose adjustment because they did not achieve the therapeutic window after the first dose. With a Bu dose-adjustment policy, regimen-related toxicity was limited. At a median follow-up of 564 days, the probabilities of 2-year survival, current thalassemia-free survival, rejection, and treatment-related mortality were 96%, 88%, 21%, and 4%, respectively. Conditioning with i.v. Bu and dose adjustment is feasible and well tolerated, although recurrence of thalassemia remains an unsolved problem in children with advanced disease. Copyright 2010 American Society for Blood and Marrow Transplantation. Published by Elsevier Inc. All rights reserved.

  12. Beta-thalassemia mutations in Rome. A high frequency of the IVSII-745 allele in subjects of latium origin.

    Science.gov (United States)

    Massa, A; Cianciulli, P; Cianetti, L; Iazzone, R; Cenci, A; Sorrentino, F; Franco, G; Pecci, G; Papa, G; Peschle, C

    1994-01-01

    We studied the molecular bases of beta-thalassemia in Rome, a city centrally located in Latium, which is a region with a low incidence of beta-carriers. People also come to Rome from other regions for specific or prenatal diagnostic assessment. Only 11 patients (20%) out of 62 characterized beta-thalassemia subjects were of Latium family origin. They presented five mutations with an uncommonly high frequency of the IVSII-745 allele, that was found in homozygosis in 4 unrelated patients from a southeastern area in the province of Frosinone. These data may indicate a founder effect.

  13. Progress in advanced high temperature turbine materials, coatings, and technology

    Science.gov (United States)

    Freche, J. C.; Ault, G. M.

    1978-01-01

    Advanced materials, coatings, and cooling technology is assessed in terms of improved aircraft turbine engine performance. High cycle operating temperatures, lighter structural components, and adequate resistance to the various environmental factors associated with aircraft gas turbine engines are among the factors considered. Emphasis is placed on progress in development of high temperature materials for coating protection against oxidation, hot corrosion and erosion, and in turbine cooling technology. Specific topics discussed include metal matrix composites, superalloys, directionally solidified eutectics, and ceramics.

  14. Apparatus for advancing a wellbore using high power laser energy

    Science.gov (United States)

    Zediker, Mark S.; Land, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Koblick, Yeshaya; Moxley, Joel F.

    2014-09-02

    Delivering high power laser energy to form a borehole deep into the earth using laser energy. Down hole laser tools, laser systems and laser delivery techniques for advancement, workover and completion activities. A laser bottom hole assembly (LBHA) for the delivery of high power laser energy to the surfaces of a borehole, which assembly may have laser optics, a fluid path for debris removal and a mechanical means to remove earth.

  15. High-dose insulin therapy in beta-blocker and calcium channel-blocker poisoning.

    Science.gov (United States)

    Engebretsen, Kristin M; Kaczmarek, Kathleen M; Morgan, Jenifer; Holger, Joel S

    2011-04-01

    INTRODUCTION. High-dose insulin therapy, along with glucose supplementation, has emerged as an effective treatment for severe beta-blocker and calcium channel-blocker poisoning. We review the experimental data and clinical experience that suggests high-dose insulin is superior to conventional therapies for these poisonings. PRESENTATION AND GENERAL MANAGEMENT. Hypotension, bradycardia, decreased systemic vascular resistance (SVR), and cardiogenic shock are characteristic features of beta-blocker and calcium-channel blocker poisoning. Initial treatment is primarily supportive and includes saline fluid resuscitation which is essential to correct vasodilation and low cardiac filling pressures. Conventional therapies such as atropine, glucagon and calcium often fail to improve hemodynamic status in severely poisoned patients. Catecholamines can increase blood pressure and heart rate, but they also increase SVR which may result in decreases in cardiac output and perfusion of vascular beds. The increased myocardial oxygen demand that results from catecholamines and vasopressors may be deleterious in the setting of hypotension and decreased coronary perfusion. METHODS. The Medline, Embase, Toxnet, and Google Scholar databases were searched for the years 1975-2010 using the terms: high-dose insulin, hyperinsulinemia-euglycemia, beta-blocker, calcium-channel blocker, toxicology, poisoning, antidote, toxin-induced cardiovascular shock, and overdose. In addition, a manual search of the Abstracts of the North American Congress of Clinical Toxicology and the Congress of the European Association of Poisons Centres and Clinical Toxicologists published in Clinical Toxicology for the years 1996-2010 was undertaken. These searches identified 485 articles of which 72 were considered relevant. MECHANISMS OF HIGH-DOSE INSULIN BENEFIT. There are three main mechanisms of benefit: increased inotropy, increased intracellular glucose transport, and vascular dilatation. EFFICACY OF HIGH

  16. High-pressure synthesis and crystal structures of beta- M NX (M = Zr, Hf; X = Cl, Br, I)

    CERN Document Server

    Chen, X; Yamanaka, S

    2002-01-01

    The single crystals of six kinds of metal nitride halide, beta- M NX (M = Zr, Hf; X = Cl, Br, I), were grown in sealed Au (or Pt) tubes by the reaction of M N or M NX powders with NH sub 4 X as fluxes under high-temperature and high-pressure conditions such as 3-5 GPa at 900-1200 sup o C. The x-ray structure analysis revealed that all six kinds of compound crystallize in a rhombohedral space group R3-bar m, Z = 6. beta-ZrNCl, beta-ZrNBr, and beta-HfNCl are isotypic with SmSI, and the others isostructural with YOF.

  17. Dynamic behaviour and shock-induced martensite transformation in near-beta Ti-5553 alloy under high strain rate loading

    Directory of Open Access Journals (Sweden)

    Wang Lin

    2015-01-01

    Full Text Available Ti-5553 alloy is a near-beta titanium alloy with high strength and high fracture toughness. In this paper, the dynamic behaviour and shock-induced martensite phase transformation of Ti-5553 alloy with alpha/beta phases were investigated. Split Hopkinson Pressure Bar was employed to investigate the dynamic properties. Microstructure evolutions were characterized by Scanning Electronic Microscopy and Transmission Electron Microscope. The experimental results have demonstrated that Ti-5553 alloy with alpha/beta phases exhibits various strain rate hardening effects, both failure through adiabatic shear band. Ti-5553 alloy with Widmannstatten microstructure exhibit more obvious strain rate hardening effect, lower critical strain rate for ASB nucleation, compared with the alloy with Bimodal microstructures. Under dynamic compression, shock-induced beta to alpha” martensite transformation occurs.

  18. High LET Radiation Can Enhance TGF(Beta) Induced EMT and Cross-Talk with ATM Pathways

    Science.gov (United States)

    Wang, Minli; Hada, Megumi; Huff, Janice; Pluth, Janice M.; Anderson, Janniffer; ONeill, Peter; Cucinotta, Francis A.

    2010-01-01

    The TGF(Beta) pathway has been shown to regulate or directly interact with the ATM pathway in the response to radiation in mammary epithelial cells. We investigated possible interactions between the TGF(Beta) and ATM pathways following simulated space radiation using hTERT immortalized human esophageal epithelial cells (EPC-hTERT), mink lung epithelial cells (Mv1lu), and several human fibroblast cell lines. TGF(Beta) is a key modulator of the Epithelial-Mesenchymal Transition (EMT), important in cancer progression and metastasis. The implication of EMT by radiation also has several lines of developing evidence, however is poorly understood. The identification of TGF(Beta) induced EMT can be shown in changes to morphology, related gene over expression or down regulation, which can be detected by RT-PCR, and immunostaining and western blotting. In this study, we have observed morphologic and molecular alternations consistent with EMT after Mv1lu cells were treated with TGF(Beta) High LET radiation enhanced TGF(Beta) mediated EMT with a dose as low as 0.1Gy. In order to consider the TGF(Beta) interaction with ATM we used a potent ATM inhibitor Ku55933 and investigated gene expression changes and Smad signaling kinetics. Ku559933 was observed to reverse TGF(Beta) induced EMT, while this was not observed in dual treated cells (radiation+TGF(Beta)). In EPC-hTERT cells, TGF(Beta) alone was not able to induce EMT after 3 days of application. A combined treatment with high LET, however, significantly caused the alteration of EMT markers. To study the function of p53 in the process of EMT, we knocked down P53 through RNA interference. Morphology changes associated with EMT were observed in epithelial cells with silenced p53. Our study indicates: high LET radiation can enhance TGF(Beta) induced EMT; while ATM is triggering the process of TGF(Beta)-induced EMT, p53 might be an essential repressor for EMT phenotypes.

  19. The effect of beta-alanine supplementation on isokinetic force and cycling performance in highly trained cyclists.

    Science.gov (United States)

    Howe, Samuel T; Bellinger, Phillip M; Driller, Matthew W; Shing, Cecilia M; Fell, James W

    2013-12-01

    Beta-alanine may benefit short-duration, high-intensity exercise performance. The aim of this randomized double-blind placebo-controlled study was to examine the effects of beta-alanine supplementation on aspects of muscular performance in highly trained cyclists. Sixteen highly trained cyclists (mean ± SD; age = 24 ± 7 yr; mass = 70 ± 7 kg; VO2max = 67 ± 4 ml · kg(-1) · min(-1)) supplemented with either beta-alanine (n = 8, 65 mg · kg - 1BM) or a placebo (n = 8; dextrose monohydrate) over 4 weeks. Pre- and postsupplementation cyclists performed a 4-minute maximal cycling test to measure average power and 30 reciprocal maximal isokinetic knee contractions at a fixed angular velocity of 180° · sec(-1) to measure average power/repetition, total work done (TWD), and fatigue index (%). Blood pH, lactate (La-) and bicarbonate (HCO3-) concentrations were measured pre- and postisokinetic testing at baseline and following the supplementation period. Beta-alanine supplementation was 44% likely to increase average power output during the 4-minute cycling time trial when compared with the placebo, although this was not statistically significant (p = .25). Isokinetic average power/repetition was significantly increased post beta-alanine supplementation compared with placebo (beta-alanine: 6.8 ± 9.9 W, placebo: -4.3 ± 9.5 W, p = .04, 85% likely benefit), while fatigue index was significantly reduced (p = .03, 95% likely benefit). TWD was 89% likely to be improved following beta-alanine supplementation; however, this was not statistically significant (p = .09). There were no significant differences in blood pH, lactate, and HCO3- between groups (p > .05). Four weeks of beta-alanine supplementation resulted in worthwhile changes in time-trial performance and short-duration muscular force production in highly trained cyclists.

  20. Improved-confinement plasmas at high temperature and high beta in the MST RFP

    Energy Technology Data Exchange (ETDEWEB)

    Chapman, B. E. [University of Wisconsin, Madison; Ahn, J. W. [University of Wisconsin, Madison; Almagri, A. F. [University of Wisconsin, Madison; Anderson, J. [University of Wisconsin, Madison; Combs, Stephen Kirk [ORNL; Foust, Charles R [ORNL; Kaufman, M. [University of Wisconsin, Madison

    2009-01-01

    We have increased substantially the electron and ion temperatures, the electron density, and the total beta in plasmas with improved energy confinement in the Madison Symmetric Torus (MST). The improved confinement is achieved with a well-established current profile control technique for reduction of magnetic tearing and reconnection. A sustained ion temperature > 1 keV is achieved with intensified reconnection-based ion heating followed immediately by current profile control. In the same plasmas, the electron temperature reaches 2 keV, and the electron thermal diffusivity drops to about 2 m(2) s(-1). The global energy confinement time is 12 ms. This and the reported temperatures are the largest values yet achieved in the reversed-field pinch (RFP). These results were attained at a density similar to 10(19) m(-3). By combining pellet injection with current profile control, the density has been quadrupled, and total beta has nearly doubled to a record value of about 26%. The Mercier criterion is exceeded in the plasma core, and both pressure-driven interchange and pressure-driven tearing modes are calculated to be linearly unstable, yet energy confinement is still improved. Transient momentum injection with biased probes reveals that global momentum transport is reduced with current profile control. Magnetic reconnection events drive rapid momentum transport related to large Maxwell and Reynolds stresses. Ion heating during reconnection events occurs globally, locally, or not at all, depending on which tearing modes are involved in the reconnection. To potentially augment inductive current profile control, we are conducting initial tests of current drive with lower-hybrid and electron-Bernstein waves.

  1. AXEL-a high pressure xenon gas TPC for neutrinoless double beta decay search

    Science.gov (United States)

    Nakamura, Kiseki; Ichikawa, Atsuko K.; Nakaya, Tsuyoshi; Minamino, Akihiro; Ban, Sei; Yanagita, Saori; Tanaka, Shunsuke; Hirose, Masanori; Sekiya, Hiroyuki; Ueshima, Kota; Miuchi, Kentaro

    2017-02-01

    To search for neutrinoless double beta decay, we have started developing a high pressure xenon gas time projection chamber as the AXEL (A Xenon ElectroLuminescence detector) project since 2014. We proposed a new scheme to measure energy deposit using electroluminescence lights to achieve high energy resolution, large mass and strong background rejection power. Important performances of compositions of our new readout scheme are shown: electric field simulation, VUV sensitivity of MPPC in high pressure gaseous xenon, response of MPPC for large amount of photons. To demonstrate as a whole system, we constructed a small prototype detector using 64 MPPCs filled with 4 bar xenon gas. Result of measurement with a 57Co gamma-ray source are shown.

  2. Peginterferon beta-1a reduces the evolution of MRI lesions to black holes in patients with RRMS: a post hoc analysis from the ADVANCE study.

    Science.gov (United States)

    Arnold, Douglas L; You, Xiaojun; Castrillo-Viguera, Carmen

    2017-08-01

    The presence of chronic black holes, i.e., chronic lesions that are hypointense on T1-weighted images and are indicative of more severe tissue injury, has been increasingly utilized as a surrogate marker of therapeutic outcome in multiple sclerosis. The ADVANCE study was a 2-year, double-blind, pivotal trial evaluating the safety and efficacy of subcutaneous peginterferon beta-1a 125 mcg in 1512 patients with relapsing-remitting multiple sclerosis (RRMS). This report describes the correlation of clinical outcomes with the evolution of acute lesions into chronic black holes in ADVANCE, and the efficacy of peginterferon beta-1a in reducing this evolution. Treatment with peginterferon beta-1a significantly reduced the mean number of new/enlarging T2-weighted (NET2) lesions (0.76 vs. 1.03 from week 24, p = 0.0037; 0.44 vs. 0.99 from week 48, p black holes by 2 years. Patients with NET2 or Gd+ lesions at 24 weeks that evolved into chronic black holes showed significantly worse clinical outcomes, including a greater proportion with 12-week (14.9 vs. 8.4%; p = 0.0167) and 24-week (12.3 vs. 7.0%; p = 0.0333) confirmed disability worsening and higher mean annualized relapse rate (0.62 vs. 0.43; p = 0.0118), compared with patients with lesions that did not evolve into black holes. The correlation was independent of treatment. Reduced risk of evolution of new lesions into chronic black holes with peginterferon beta-1a treatment suggests potential to reduce long-term disability in RRMS by preventing irreversible tissue damage.

  3. Prophylactic beta-blockade to prevent myocardial infarction perioperatively in high-risk patients who undergo general surgical procedures.

    Science.gov (United States)

    Taylor, Rebecca C; Pagliarello, Giuseppe

    2003-06-01

    The benefit of administering beta-adrenergic blocking agents perioperatively to surgical patients at high risk for myocardial ischemia has been demonstrated in several well-designed randomized controlled trials. These benefits have included a reduction in the incidence of myocardial complications and an improvement in overall survival for patients with evidence of or at risk for coronary artery disease (CAD). We designed a retrospective study at the Ottawa Civic Hospital to investigate the use of beta-blockers in the perioperative period for high-risk general surgery patients who underwent laparotomy and to explore the reasons for failure to prescribe or administer beta-blockers when indicated. All 236 general surgery patients over the age of 50 years who underwent laparotomy for major gastrointestinal surgery between Jan. 1, 2001, and Dec. 31, 2001, were assigned a cardiac risk classification using the risk stratification described by Mangano and colleagues. The perioperative prescription and administration of beta-blockers were noted as were the patient's heart rate and blood pressure parameters for the first postoperative week, in-hospital adverse cardiac events and death. Of the 143 patients classified as being at risk for CAD or having definite evidence of CAD, 87 (60.8%) did not receive beta-blockers perioperatively. Of those who did, 43 were previously on beta-blockers and 13 had them ordered preoperatively. Patients with definite CAD were significantly more likely than others to receive beta-blockers perioperatively (p nurses irrespective of nil par os status. The mean heart rate and blood pressure parameters for patients receiving beta-blockers postoperatively was 82 beats/min and 110 mm Hg, respectively, and these values were not significantly different from the mean heart rate of patients not receiving beta-blockers. The number of postoperative cardiac events was significantly higher in patients with definite evidence of CAD, and among this group, the

  4. Advanced High-Temperature, High-Pressure Transport Reactor Gasification

    Energy Technology Data Exchange (ETDEWEB)

    Michael L. Swanson

    2005-08-30

    50 hours of gasification on a petroleum coke from the Hunt Oil Refinery and an additional 73 hours of operation on a high-ash coal from India. Data from these tests indicate that while acceptable fuel gas heating value was achieved with these fuels, the transport gasifier performs better on the lower-rank feedstocks because of their higher char reactivity. Comparable carbon conversions have been achieved at similar oxygen/coal ratios for both air-blown and oxygen-blown operation for each fuel; however, carbon conversion was lower for the less reactive feedstocks. While separation of fines from the feed coals is not needed with this technology, some testing has suggested that feedstocks with higher levels of fines have resulted in reduced carbon conversion, presumably due to the inability of the finer carbon particles to be captured by the cyclones. These data show that these low-rank feedstocks provided similar fuel gas heating values; however, even among the high-reactivity low-rank coals, the carbon conversion did appear to be lower for the fuels (brown coal in particular) that contained a significant amount of fines. The fuel gas under oxygen-blown operation has been higher in hydrogen and carbon dioxide concentration since the higher steam injection rate promotes the water-gas shift reaction to produce more CO{sub 2} and H{sub 2} at the expense of the CO and water vapor. However, the high water and CO{sub 2} partial pressures have also significantly reduced the reaction of (Abstract truncated)

  5. Eukaryotic beta-alanine synthases are functionally related but have a high degree of structural diversity

    DEFF Research Database (Denmark)

    Gojkovic, Zoran; Sandrini, Michael; Piskur, Jure

    2001-01-01

    beta -Alanine synthase (EC 3.5.1.6), which catalyzes the final step of pyrimidine catabolism, has only been characterized in mammals. A Saccharomyces kluyveri pyd3 mutant that is unable to grow on N-carbamy-beta -alanine as the sole nitrogen source and exhibits diminished beta -alanine synthase...... no pyrimidine catabolic pathway, it enabled growth on N-carbamyl- beta -alanine as the sole nitrogen source. The D. discoideum and D. melanogaster PYD3 gene products are similar to mammalian beta -alanine synthases. In contrast, the S. kluyveri protein is quite different from these and more similar to bacterial...... N- carbamyl amidohydrolases. All three beta -alanine synthases are to some degree related to various aspartate transcarbamylases, which catalyze the second step of the de novo pyrimidine biosynthetic pathway. PYD3 expression in yeast seems to be inducible by dihydrouracil and N-carbamyl-beta...

  6. A Study of Optimization of Alpha-Beta-Gamma-Eta Filter for Tracking a High Dynamic Target

    Directory of Open Access Journals (Sweden)

    Tae-Gweon Jeong

    2017-03-01

    Full Text Available The tracking filter plays a key role in accurate estimation and prediction of maneuvering vessel’s position and velocity. Different methods are used for tracking. However, the most commonly used method is the Kalman filter and its modifications. The Alpha-Beta-Gamma filter is one of the special cases of the general solution pro-vided by the Kalman filter. It is a third order filter that computes the smoothed estimates of position, velocity and acceleration for the nth observation, and also predicts the next position and velocity. Although found to track a maneuvering target with a good accuracy than the constant velocity, Alpha-Beta filter, the Alpha-Beta-Gamma filter does not perform impressively under high maneuvers such as when the target is undergoing changing accelerations. This study, therefore, aims to track a highly maneuvering target experiencing jerky motions due to changing accelerations. The Alpha-Beta-Gamma filter is extended to include the fourth state that is, constant jerk to correct the sudden change of acceleration in order to improve the filter’s performance. Results obtained from simulations of the input model of the target dynamics under consideration indicate an improvement in performance of the jerky model, Alpha-Beta-Gamma-Eta, algorithm as compared to the constant acceleration model, Alpha-Beta-Gamma in terms of error reduction and stability of the filter during target maneuver.

  7. Biolistic transformation of highly regenerative sugar beet (Beta vulgaris L.) leaves.

    Science.gov (United States)

    Ivic-Haymes, Snezana D; Smigocki, Ann C

    2005-03-01

    Leaves of greenhouse-grown sugar beet (Beta vulgaris L.) plants that were first screened for high regeneration potential were transformed via particle bombardment with the uidA gene fused to the osmotin or proteinase inhibitor II gene promoter. Stably transformed calli were recovered as early as 7 weeks after bombardment and GUS-positive shoots regenerated 3 months after bombardment. The efficiency of transformation ranged from 0.9% to 3.7%, and stable integration of the uidA gene into the genome was confirmed by Southern blot analysis. The main advantages of direct bombardment of leaves to regenerate transformed sugar beet include (1) a readily available source of highly regenerative target tissue, (2) minimal tissue culture manipulation before and after bombardment, and (3) the overall rapid regeneration of transgenic shoots.

  8. EPOCH code simulation of a non-thermal distribution driven by neutral beam injection in a high-beta plasma

    Science.gov (United States)

    Necas, A.; Tajima, T.; Nicks, S.; Magee, R.; Clary, R.; Roche, T.; Tri Alpha Energy Team

    2016-10-01

    In Tri Alpha Energy's C-2U experiment, advanced beam-driven field-reversed configuration (FRC) plasmas were sustained via tangential neutral beam injection. The dominant fast ion population made a dramatic impact on the overall plasma performance. To explain an experimentally observed anomalous neutron signal (100x thermonuclear), we use EPOCH PIC code to simulate possible beam driven non-destructive instabilities that transfer energy from fast ions to the plasma, causing phase space bunching. We propose that the hydrogen beam ion population drives collective modes in the deuterium target plasma, giving rise to the instability and increased fusion rate. The instability changes character from electrostatic in the low beta edge to fully electromagnetic in the core, with an associated reduction in growth rates. The DD reactivity enhancement is calculated using a two-body correlation function and compared to the experimentally observed neutron yield. The high-energy tails in the distributions of the plasma deuterons and beam protons are observed via a mass-resolving Neutral Particle Analyzer (NPA) diagnostic. This observation is qualitatively consistent with EPOCH simulation of the beam-plasma instability.

  9. On the alpha --> beta transition of carbon-coated highly oriented PVDF ultrathin film induced by melt recrystallization.

    Science.gov (United States)

    Wang, Jijun; Li, Huihui; Liu, Jichun; Duan, Yongxin; Jiang, Shidong; Yan, Shouke

    2003-02-12

    Poly(vinylidene fluoride) (PVDF) is one of the polymers which exhibit pronounced polymorphic crystalline forms, depending on crystallization conditions. Four different crystalline modifications, i.e., alpha, beta, gamma, and delta, have been reported so far. Among them, even though the alpha-form is the most common one, the beta-phase is the one that has attracted the widest interest due to its extensive piezo- and pyroelectric applications. During the past few decades, a substantial amount of work has been done in attempts to characterize these crystal modifications and transformations among them. It was well documented that the alpha-form PVDF can be easily obtained through melt crystallization of the PVDF at atmospheric pressure. Its beta-counterpart can, however, only be directly obtained by growth from solution, molecular epitaxy on the surface of potassium bromide, melt crystallization at high pressures, or by applying with a strong electric field. Transformation from its alpha-phase to beta-phase has been achieved by mechanical deformation, while the retransformation could be conducted through melt recrystallization at atmospheric pressure. In the present work, the recrystallization behavior of carbon-coated melt-drawn oriented PVDF ultrathin films at atmospheric pressure was studied by means of transmission electron microscopy and electron diffraction. The results indicate that through vacuum evaporating a thin carbon layer on the surface of highly oriented alpha-PVDF ultrathin film, not only has its high orientation been preserved after a complete melting and recrystallization process, but an alpha --> beta transition of PVDF has also been achieved through melt recrystallization at atmospheric pressure. This technique can be successfully used for preparing highly oriented beta-PVDF ultrathin films, especially patterned microstructures of PVDF with its highly oriented polar beta-phase and nonoriented nonpolar alpha-phase.

  10. Advanced High Strength Steel in Auto Industry: an Overview

    OpenAIRE

    2014-01-01

    The world’s most common alloy, steel, is the material of choice when it comes to making products as diverse as oil rigs to cars and planes to skyscrapers, simply because of its functionality, adaptability, machine-ability and strength. Newly developed grades of Advanced High Strength Steel (AHSS) significantly outperform competing materials for current and future automotive applications. This is a direct result of steel’s performance flexibility, as well as of its many benefits in...

  11. Advanced High-Level Waste Glass Research and Development Plan

    Energy Technology Data Exchange (ETDEWEB)

    Peeler, David K. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Vienna, John D. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Schweiger, Michael J. [Pacific Northwest National Lab. (PNNL), Richland, WA (United States); Fox, Kevin M. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2015-07-01

    The U.S. Department of Energy Office of River Protection (ORP) has implemented an integrated program to increase the loading of Hanford tank wastes in glass while meeting melter lifetime expectancies and process, regulatory, and product quality requirements. The integrated ORP program is focused on providing a technical, science-based foundation from which key decisions can be made regarding the successful operation of the Hanford Tank Waste Treatment and Immobilization Plant (WTP) facilities. The fundamental data stemming from this program will support development of advanced glass formulations, key process control models, and tactical processing strategies to ensure safe and successful operations for both the low-activity waste (LAW) and high-level waste (HLW) vitrification facilities with an appreciation toward reducing overall mission life. The purpose of this advanced HLW glass research and development plan is to identify the near-, mid-, and longer-term research and development activities required to develop and validate advanced HLW glasses and their associated models to support facility operations at WTP, including both direct feed and full pretreatment flowsheets. This plan also integrates technical support of facility operations and waste qualification activities to show the interdependence of these activities with the advanced waste glass (AWG) program to support the full WTP mission. Figure ES-1 shows these key ORP programmatic activities and their interfaces with both WTP facility operations and qualification needs. The plan is a living document that will be updated to reflect key advancements and mission strategy changes. The research outlined here is motivated by the potential for substantial economic benefits (e.g., significant increases in waste throughput and reductions in glass volumes) that will be realized when advancements in glass formulation continue and models supporting facility operations are implemented. Developing and applying advanced

  12. Advances and synergy of high pressure sciences at synchrotron sources

    Energy Technology Data Exchange (ETDEWEB)

    Liu, H.; Ehm, L.; Duffy, T.; Crichton, W.; Aoki, K.

    2009-01-01

    Introductory overview to the special issue papers on high-pressure sciences and synchrotron radiation. High-pressure research in geosciences, materials science and condensed matter physics at synchrotron sources is experiencing growth and development through synergistic efforts around the world. A series of high-pressure science workshops were organized in 2008 to highlight these developments. One of these workshops, on 'Advances in high-pressure science using synchrotron X-rays', was held at the National Synchrotron Light Source (NSLS), Brookhaven National Laboratory, USA, on 4 October 2008. This workshop was organized in honour of Drs Jingzhu Hu and Quanzhong Guo in celebration of their retirement after up to 18 years of dedicated service to the high-pressure community as beamline scientists at X17 of NSLS. Following this celebration of the often unheralded role of the beamline scientist, a special issue of the Journal of Synchrotron Radiation on Advances and Synergy of High-Pressure Sciences at Synchrotron Sources was proposed, and we were pleased to invite contributions from colleagues who participated in the workshop as well as others who are making similar efforts at synchrotron sources worldwide.

  13. Application of high magnetic fields in advanced materials processing

    Institute of Scientific and Technical Information of China (English)

    MA Yanwei; XIAO Liye; YAN Luguang

    2006-01-01

    Recently, steady magnetic fields available from cryogen-free superconducting magnets open up new ways to process materials. In this paper,the main results obtained by using a high magnetic field to process several advanced materials are reviewed. These processed objects primarily include superconducting, magnetic, metallic and nanometer-scaled materials. It has been found that a high magnetic field can effectively align grains when fabricating the magnetic and non-magnetic materials and make inclusions migrate in a molten metal. The mechanism is discussed from the theoretical viewpoint of magnetization energy.

  14. High quality mask storage in an advanced Logic-Fab

    Science.gov (United States)

    Jähnert, Carmen; Fritsche, Silvio

    2012-02-01

    High efficient mask logistics as well as safe and high quality mask storage are essential requirements within an advanced lithography area of a modern logic waferfab. Fast operational availability of the required masks at the exposure tool with excellent mask condition requires a safe mask handling, safeguarding of high mask quality over the whole mask usage time without any quality degradation and an intelligent mask logistics. One big challenge is the prevention of haze on high advanced phase shift masks used in a high volume production line for some thousands of 248nm or 193nm exposures. In 2008 Infineon Dresden qualified a customer specific developed semi-bare mask storage system from DMSDynamic Micro Systems in combination with a high advanced mask handling and an interconnected complex logistic system. This high-capacity mask storage system DMS M1900.22 for more than 3000 masks with fully automated mask and box handling as well as full-blown XCDA purge has been developed and adapted to the Infineon Lithotoollandscape using Nikon and SMIF reticle cases. Advanced features for ESD safety and mask security, mask tracking via RFID and interactions with the exposure tools were developed and implemented. The stocker is remote controlled by the iCADA-RSM system, ordering of the requested mask directly from the affected exposure tool allows fast access. This paper discusses the advantages and challenges for this approach as well as the practical experience gained during the implementation of the new system which improves the fab performance with respect to mask quality, security and throughput. Especially the realization of an extremely low and stable humidity level in addition with a well controlled air flow at each mask surface, preventing masks from haze degradation and particle contamination, turns out to be a notable technical achievement. The longterm stability of haze critical masks has been improved significantly. Relevant environmental parameters like

  15. Recent advances in phosphate laser glasses for high power applications

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J.H.

    1996-05-14

    Recent advances in Nd-doped phosphate laser glasses for high-peak-power and high-average-power applications are reviewed. Compositional studies have progressed to the point that glasses can be tailored to have specific properties for specific applications. Non-radiative relaxation effects can be accurately modeled and empirical expressions have been developed to evaluate both intrinsic (structural) and extrinsic (contamination induced) relaxation effects. Losses due to surface scattering and bulk glass absorption have been carefully measured and can be accurately predicted. Improvements in processing have lead to high damage threshold (e.g. Pt inclusion free) and high thermal shock resistant glasses with improved edge claddings. High optical quality pieces up to 79 x 45 x 4cm{sup 3} have been made and methods for continuous melting laser glass are under development.

  16. Control of a high beta maneuvering reentry vehicle using dynamic inversion.

    Energy Technology Data Exchange (ETDEWEB)

    Watts, Alfred Chapman

    2005-05-01

    The design of flight control systems for high performance maneuvering reentry vehicles presents a significant challenge to the control systems designer. These vehicles typically have a much higher ballistic coefficient than crewed vehicles like as the Space Shuttle or proposed crew return vehicles such as the X-38. Moreover, the missions of high performance vehicles usually require a steeper reentry flight path angle, followed by a pull-out into level flight. These vehicles then must transit the entire atmosphere and robustly perform the maneuvers required for the mission. The vehicles must also be flown with small static margins in order to perform the required maneuvers, which can result in highly nonlinear aerodynamic characteristics that frequently transition from being aerodynamically stable to unstable as angle of attack increases. The control system design technique of dynamic inversion has been applied successfully to both high performance aircraft and low beta reentry vehicles. The objective of this study was to explore the application of this technique to high performance maneuvering reentry vehicles, including the basic derivation of the dynamic inversion technique, followed by the extension of that technique to the use of tabular trim aerodynamic models in the controller. The dynamic inversion equations are developed for high performance vehicles and augmented to allow the selection of a desired response for the control system. A six degree of freedom simulation is used to evaluate the performance of the dynamic inversion approach, and results for both nominal and off nominal aerodynamic characteristics are presented.

  17. The "edge effect" after implantation of beta-emitting (55Co) stents with high initial activity.

    Science.gov (United States)

    Cervinka, Pavel; St'ásek, Josef; Costa, Marco Aurelio; Stursa, Jan; Fiser, Miloslav; Vodnanský, Petr; Kocisová, Michaela; Veselka, Josef; Pleskot, Miloslav; Malý, Jaroslav

    2004-01-01

    The aim of this study was to evaluate the incidence and the cause of "edge restenosis" after implantation of high activity 41.1 microCi +/- 1.2 microCi = 1520 kBq +/- 44 kBq, beta-emitting (55Co) stents. Proton bombarding in cyclotron has brought the radioactivity. Intravascular ultrasound (IVUS) investigation has been completed in 10 patients. The angiographies performed at 6 month revealed restenosis >50% in 5 cases (50%). The analysis of edges (5 mm distally and proximally to the last stent struts) showed no significant changes in TVV (187.3 +/- 62.60 mm3 and 176.9 +/- 53.5 mm3) but PMV increase significantly (i.e. neointimal proliferation) from 61.9 +/- 31.2 mm3 to 82.2 +/- 43.4 mm3 (pedge effect"/neointimal hyperplasia was in this trial sharp fall-off in radiation at the edges of the stents.

  18. Magnetized plasma flow injection into tokamak and high-beta compact torus plasmas

    Science.gov (United States)

    Matsunaga, Hiroyuki; Komoriya, Yuuki; Tazawa, Hiroyasu; Asai, Tomohiko; Takahashi, Tsutomu; Steinhauer, Loren; Itagaki, Hirotomo; Onchi, Takumi; Hirose, Akira

    2010-11-01

    As an application of a magnetized coaxial plasma gun (MCPG), magnetic helicity injection via injection of a highly elongated compact torus (magnetized plasma flow: MPF) has been conducted on both tokamak and field-reversed configuration (FRC) plasmas. The injected plasmoid has significant amounts of helicity and particle contents and has been proposed as a fueling and a current drive method for various torus systems. In the FRC, MPF is expected to generate partially spherical tokamak like FRC equilibrium by injecting a significant amount of magnetic helicity. As a circumstantial evidence of the modified equilibrium, suppressed rotational instability with toroidal mode number n = 2. MPF injection experiments have also been applied to the STOR-M tokamak as a start-up and current drive method. Differences in the responses of targets especially relation with beta value and the self-organization feature will be studied.

  19. Integrated modeling of high poloidal beta scenario for a next-step reactor

    Science.gov (United States)

    McClenaghan, J.; Garofalo, A. M.; Meneghini, O.; Smith, S. P.

    2015-11-01

    In order to fill the scientific and technological gaps between ITER and a nuclear fusion power plant DEMO, a next-step integrated nuclear test facility is critical. A high poloidal beta tokamak regime investigated in recent DIII-D experiments is a promising candidate for steady state operation in such a next-step device because the large bootstrap current fraction (~ 80 %) reduces the demands on the external current drive. Despite the large values of q95 ~10, the normalized fusion performance observed in the experiments meet the target for an economically attractive fusion power plant such as ARIES-ACT2. In this work, we will project the performance for a conducting and superconducting coil next-step steady state reactor using theory-based 0-D modeling and full 1.5D transport modeling. Work supported by U.S. DOE under DE-FC02-04ER54698.

  20. High-Pressure Design of Advanced BN-Based Materials

    Directory of Open Access Journals (Sweden)

    Oleksandr O. Kurakevych

    2016-10-01

    Full Text Available The aim of the present review is to highlight the state of the art in high-pressure design of new advanced materials based on boron nitride. Recent experimental achievements on the governing phase transformation, nanostructuring and chemical synthesis in the systems containing boron nitride at high pressures and high temperatures are presented. All these developments allowed discovering new materials, e.g., ultrahard nanocrystalline cubic boron nitride (nano-cBN with hardness comparable to diamond, and superhard boron subnitride B13N2. Thermodynamic and kinetic aspects of high-pressure synthesis are described based on the data obtained by in situ and ex situ methods. Mechanical and thermal properties (hardness, thermoelastic equations of state, etc. are discussed. New synthetic perspectives, combining both soft chemistry and extreme pressure–temperature conditions are considered.

  1. High-Pressure Design of Advanced BN-Based Materials.

    Science.gov (United States)

    Kurakevych, Oleksandr O; Solozhenko, Vladimir L

    2016-10-20

    The aim of the present review is to highlight the state of the art in high-pressure design of new advanced materials based on boron nitride. Recent experimental achievements on the governing phase transformation, nanostructuring and chemical synthesis in the systems containing boron nitride at high pressures and high temperatures are presented. All these developments allowed discovering new materials, e.g., ultrahard nanocrystalline cubic boron nitride (nano-cBN) with hardness comparable to diamond, and superhard boron subnitride B13N₂. Thermodynamic and kinetic aspects of high-pressure synthesis are described based on the data obtained by in situ and ex situ methods. Mechanical and thermal properties (hardness, thermoelastic equations of state, etc.) are discussed. New synthetic perspectives, combining both soft chemistry and extreme pressure-temperature conditions are considered.

  2. Resistance spot welding and weldbonding of advanced high strength steels

    Energy Technology Data Exchange (ETDEWEB)

    Weber, G.; Gaul, H.; Rethmeier, M. [BAM Federal Institute for Materials Research and Testing, Berlin (Germany). Div. V.5 ' ' Safety of Joined Components' ' ; Thommes, H.; Hahn, O. [Paderborn Univ. (Germany). Fakultaet fuer Maschinenbau

    2010-11-15

    The resistance spot welding procedure is one of the most important joining techniques in lightweight car body shell mass production. Especially for newly developed high strength multiphase steels, also called advanced high strength steels (AHSS), and ultra high strength steels (UHSS), this joining technique has more advantages than other thermal and mechanical joining procedures for thin steel sheets. Additionally, the technique of adhesive bonding and its combination with the technique of resistance spot welding called weldbonding becomes more and more important. One of the targets of the contribution is to show the influence of joined advanced high strength steels on the process reliability for both the resistance spot welding process and the weldbonding process. Based on welding current ranges and on results of electrode wear tests, statements concerning the resistance spot weldability of some special AHSS will be given. The mechanical behaviour of spot welded and weldbonded joints for different AHSS will be studied. Furthermore, some statements regarding the fracture behaviour, the hardness and the fatigue behaviour of both spot welded and weldbonded joints for different AHSS will be given. Finally, some results on the mechanical properties of spot welded and weldbounded joints under corrosive attacks with be discussed. (orig.)

  3. Common haplotype dependency of high G gamma-globin gene expression and high Hb F levels in beta-thalassemia and sickle cell anemia patients.

    OpenAIRE

    Labie, D; Pagnier, J.; Lapoumeroulie, C; Rouabhi, F; Dunda-Belkhodja, O; Chardin, P; Beldjord, C; Wajcman, H; Fabry, M E; Nagel, R L

    1985-01-01

    We have studied 42 homozygous beta-thalassemia patients from Algeria and 34 sickle cell anemia patients from Senegal and Benin, determining the relationship between haplotypes, Hb F, and G gamma-globin/A gamma-globin ratios. Populations selected have a high frequency of haplotype homozygotes because of consanguinity (Algeria) and geographic homogeneity (West Africa). We find in beta-thalassemia patients, that haplotype IX in haplotypic homozygotes and heterozygotes, haplotype III in heterozyg...

  4. NK1 receptor fused to beta-arrestin displays a single-component, high-affinity molecular phenotype

    DEFF Research Database (Denmark)

    Martini, Lene; Hastrup, Hanne; Holst, Birgitte

    2002-01-01

    with low affinity against antagonists. In contrast, in the NK1-beta-arrestin1 fusion protein, all ligands bound with similar affinity independent of the choice of radioligand and with Hill coefficients near unity. We conclude that the NK1 receptor in complex with arrestin is in a high-affinity, stable......Arrestins are cytosolic proteins that, upon stimulation of seven transmembrane (7TM) receptors, terminate signaling by binding to the receptor, displacing the G protein and targeting the receptor to clathrin-coated pits. Fusion of beta-arrestin1 to the C-terminal end of the neurokinin NK1 receptor...... Gq/G11 and Gs pathways. The NK1-beta-arrestin1 fusion construct bound nonpeptide antagonists with increased affinity but surprisingly also bound two types of agonists, substance P and neurokinin A, with high, normal affinity. In the wild-type NK1 receptor, neurokinin A (NKA) competes for binding...

  5. Bad Beta, Good Beta

    OpenAIRE

    Campbell, John; Vuolteenaho, Tuomo

    2003-01-01

    This paper explains the size and value "anomalies" in stock returns using an economically motivated two-beta model. We break the beta of a stock with the market portfolio into two components, one reflecting news about the market's future cash flows and one reflecting news about the market's discount rates. Intertemporal asset pricing theory suggests that the former should have a higher price of risk; thus beta, like cholesterol, comes in "had" and "good" varieties. Empirically, we find that v...

  6. Proceedings of the US-Japan workshop and the satellite meeting of ITC-9 on physics of high beta plasma confinement in innovative fusion system

    Energy Technology Data Exchange (ETDEWEB)

    Goto, Seiichi; Yoshimura, Satoru [eds.

    1999-04-01

    The US-Japan Workshop on Physics of High Beta Plasma Confinement in Innovative Fusion System was held jointly with the Satellite Meeting of ITC-9 at National Institute for Fusion Science (NIFS), Toki-city during December 14-15, 1998. This proceedings book includes the papers of the talks given at the workshop. These include: Theoretical analysis on the stability of field reversed configuration (FRC) plasmas; Theory and Modeling of high {beta} plasmas; Recent progressive experiments in high {beta} systems; Formation of high {beta} plasmas using merging phenomenon; Theory and Modeling of a FRC Fusion Reactor. The 15 papers are indexed individually. (J.P.N.)

  7. Friction Stir Spot Welding of Advanced High Strength Steels

    Energy Technology Data Exchange (ETDEWEB)

    Hovanski, Yuri; Santella, M. L.; Grant, Glenn J.

    2009-12-28

    Friction stir spot welding was used to join two advanced high-strength steels using polycrystalline cubic boron nitride tooling. Numerous tool designs were employed to study the influence of tool geometry on weld joints produced in both DP780 and a hot-stamp boron steel. Tool designs included conventional, concave shouldered pin tools with several pin configurations; a number of shoulderless designs; and a convex, scrolled shoulder tool. Weld quality was assessed based on lap shear strength, microstructure, microhardness, and bonded area. Mechanical properties were functionally related to bonded area and joint microstructure, demonstrating the necessity to characterize processing windows based on tool geometry.

  8. Advanced Modified High Performance Synthetic Jet Actuator with Curved Chamber

    Science.gov (United States)

    Xu, Tian-Bing (Inventor); Su, Ji (Inventor); Jiang, Xiaoning (Inventor)

    2014-01-01

    The advanced modified high performance synthetic jet actuator with optimized curvature shape chamber (ASJA-M) is a synthetic jet actuator (SJA) with a lower volume reservoir or chamber. A curved chamber is used, instead of the conventional cylinder chamber, to reduce the dead volume of the jet chamber and increase the efficiency of the synthetic jet actuator. The shape of the curvature corresponds to the maximum displacement (deformation) profile of the electroactive diaphragm. The jet velocity and mass flow rate for the ASJA-M will be several times higher than conventional piezoelectric actuators.

  9. Postoperative chemoradiotherapy in high risk locally advanced gastric cancer

    Energy Technology Data Exchange (ETDEWEB)

    Song, Sang Hyuk; Chie, Eui Kyu; Kim, Kyu Bo; Lee, Hyuk Joon; Yang, Han Kwang; Han, Sae Won; Oh, Do Youn; Im, Seok Ah; Bang, Yung Jue; Ha, Sung W. [Seoul National University College of Medicine, Seoul(Korea, Republic of)

    2012-12-15

    To evaluate treatment outcome of patients with high risk locally advanced gastric cancer after postoperative chemoradiotherapy. Between May 2003 and May 2012, thirteen patients who underwent postoperative chemoradiotherapy for gastric cancer with resection margin involvement or adjacent structure invasion were retrospectively analyzed. Concurrent chemotherapy was administered in 10 patients. Median dose of radiation was 50.4 Gy (range, 45 to 55.8 Gy). The median follow-up duration for surviving patients was 48 months (range, 5 to 108 months). The 5-year overall survival rate was 42% and the 5-year disease-free survival rate was 28%. Major pattern of failure was peritoneal seeding with 46%. Loco-regional recurrence was reported in only one patient. Grade 2 or higher gastrointestinal toxicity occurred in 54% of the patients. However, there was only one patient with higher than grade 3 toxicity. Despite reported suggested role of adjuvant radiotherapy with combination chemotherapy in gastric cancer, only very small portion of the patients underwent the treatment. Results from this study show that postoperative chemoradiotherapy provided excellent locoregional control with acceptable and manageable treatment related toxicity in patients with high risk locally advanced gastric cancer. Thus, postoperative chemoradiotherapy may improve treatment result in terms of locoregional control in these high risk patients. However, as these findings are based on small series, validation with larger cohort is suggested.

  10. Fructooligosaccharides synthesis by highly stable immobilized beta-fructofuranosidase from Aspergillus aculeatus

    NARCIS (Netherlands)

    Soibelmann Glock Lorenzoni, André; Aydos, Luiza F.; Klein, Manuela P.; Rodrigues, Rafael C.; Hertz, Plinho F.

    2014-01-01

    The enzymatic synthesis of fructooligosaccharides (FOS) was carried out using a partially purified beta-fructofuranosidase from the commercial enzyme preparation Viscozyme L. Partial purification of beta-fructofuranosidase from Viscozyme L was done by batch adsorption using ion-exchange resin DEAE-S

  11. GPCR engineering yields high-resolution structural insights into beta2-adrenergic receptor function

    DEFF Research Database (Denmark)

    Rosenbaum, Daniel M; Cherezov, Vadim; Hanson, Michael A

    2007-01-01

    crystallization, we engineered a beta2AR fusion protein in which T4 lysozyme (T4L) replaces most of the third intracellular loop of the GPCR ("beta2AR-T4L") and showed that this protein retains near-native pharmacologic properties. Analysis of adrenergic receptor ligand-binding mutants within the context...

  12. High-resolution studies of beta-delayed proton emitters at IGISOL facility

    NARCIS (Netherlands)

    Jokinen, A; Aysto, J; Dendooven, P; Hankonen, S; Honkanen, A; Huikari, J; Lhersonneau, G; Lipas, PO; Penttila, H; Perajarvi, K; Oinonen, M; Nieminen, A; Siiskonen, T; Wang, JC

    1998-01-01

    Beta-decays of Al-23 and Ti-41 have been studied by applying ion guide techniques, gamma detection and a gas-Si telescope for charged-particle detection. The experimental beta-decay strength of Ti-41 was found to be quenched by a factor of q(2) = 0.64 compared to our shell model calculations below 8

  13. Advanced Capacitor with SiC for High Temperature Applications

    Science.gov (United States)

    Tsao, B. H.; Ramalingam, M. L.; Bhattacharya, R. S.; Carr, Sandra Fries

    1994-07-01

    An advanced capacitor using SiC as the dielectric material has been developed for high temperature, high power, and high density electronic components for aircraft and aerospace application. The conventional capacitor consists of a large number of metallized polysulfone films that are arranged in parallel and enclosed in a sealed metal case. However, problems with electrical failure, thermal failure, and dielectric flow were experienced by Air Force suppliers for the component and subsystem for lack of suitable properties of the dielectric material. The high breakdown electrical field, high thermal conductivity, and high temperature operational resistance of SiC compared to similar properties of the conventional ceramic and polymer capacitor would make it a better choice for a high temperature, and high power capacitor. The quality of the SiC film was evaluated. The electrical parameters, such as the capacitance, dissipation factor, equivalent series resistance, and dielectric withstand voltage, were evaluated. The prototypical capacitors are currently being fabricated using SiC film.

  14. High temperature electrical energy storage: advances, challenges, and frontiers.

    Science.gov (United States)

    Lin, Xinrong; Salari, Maryam; Arava, Leela Mohana Reddy; Ajayan, Pulickel M; Grinstaff, Mark W

    2016-10-24

    With the ongoing global effort to reduce greenhouse gas emission and dependence on oil, electrical energy storage (EES) devices such as Li-ion batteries and supercapacitors have become ubiquitous. Today, EES devices are entering the broader energy use arena and playing key roles in energy storage, transfer, and delivery within, for example, electric vehicles, large-scale grid storage, and sensors located in harsh environmental conditions, where performance at temperatures greater than 25 °C are required. The safety and high temperature durability are as critical or more so than other essential characteristics (e.g., capacity, energy and power density) for safe power output and long lifespan. Consequently, significant efforts are underway to design, fabricate, and evaluate EES devices along with characterization of device performance limitations such as thermal runaway and aging. Energy storage under extreme conditions is limited by the material properties of electrolytes, electrodes, and their synergetic interactions, and thus significant opportunities exist for chemical advancements and technological improvements. In this review, we present a comprehensive analysis of different applications associated with high temperature use (40-200 °C), recent advances in the development of reformulated or novel materials (including ionic liquids, solid polymer electrolytes, ceramics, and Si, LiFePO4, and LiMn2O4 electrodes) with high thermal stability, and their demonstrative use in EES devices. Finally, we present a critical overview of the limitations of current high temperature systems and evaluate the future outlook of high temperature batteries with well-controlled safety, high energy/power density, and operation over a wide temperature range.

  15. A new highly efficient beta-glucosidase from the novel species, Aspergillus saccharolyticus

    DEFF Research Database (Denmark)

    Sørensen, Annette

    , combined with Celluclast 1.5L, substitute the use of Novozym 188 in hydrolysis of pretreated biomass. In the wake of this, focus was placed on beta-glucosidases. A screening for beta-glucosidase activity was conducted, using wheat bran as substrate in simple submerged fermentation, testing selected strains...... mainly opens up the cell wall structure and partly hydrolyzes hemicellulose, so that cellulose is the main target for enzyme hydrolysis. Beta-glucosidases (EC 3.2.1.21) play an essential role in efficient hydrolysis of cellulose. By hydrolysis of cellobiose, beta-glucosidases relieve inhibiting...... preparations Novozym 188 (mainly beta-glucosidase activity) and Celluclast 1.5L (mainly cellobiohydrolase and endoglucanase activity) (Novozymes A/S) have been used in combination for hydrolysis of pretreated biomass, and recently complete enzyme cocktails have been launched, Cellic CTec (Novozymes A...

  16. [The toxicity of massive dosis of VM26 (4-demethyl-epipodophyllotoxin-beta-D-thenylidene glucoside). A contribution to the therapy of advanced ovarian cancer (author's transl)].

    Science.gov (United States)

    Jankowski, R P; Vahrson, H

    1977-12-09

    19 patients with advanced ovarian cancer (FIGO-stages IIb-IV) were treated by ultra-high doses of VM26 partly according to positive oncobiograms during Multiple-drug-stoss-therapy. The toxic reactions and the cytostatic effect were investigated. The range of 57,9% remissions and the moderate toxicity suggest a specific application of VM26 in advanced ovarian cancer.

  17. Beta-Blockers for Exams Identify Students at High Risk of Psychiatric Morbidity.

    Science.gov (United States)

    Butt, Jawad H; Dalsgaard, Søren; Torp-Pedersen, Christian; Køber, Lars; Gislason, Gunnar H; Kruuse, Christina; Fosbøl, Emil L

    2017-04-01

    Beta-blockers relieve the autonomic symptoms of exam-related anxiety and may be beneficial in exam-related and performance anxiety, but knowledge on related psychiatric outcomes is unknown. We hypothesized that beta-blocker therapy for exam-related anxiety identifies young students at risk of later psychiatric events. Using Danish nationwide administrative registries, we studied healthy students aged 14-30 years (1996-2012) with a first-time claimed prescription for a beta-blocker during the exam period (May-June); students who were prescribed a beta-blocker for medical reasons were excluded. We matched these students on age, sex, and time of year to healthy and study active controls with no use of beta-blockers. Risk of incident use of antidepressants, incident use of other psychotropic medications, and suicide attempts was examined by cumulative incidence curves for unadjusted associations and multivariable cause-specific Cox proportional hazard analyses for adjusted hazard ratios (HRs). We identified 12,147 healthy students with exam-related beta-blocker use and 12,147 matched healthy students with no current or prior use of beta-blockers (median age, 19 years; 80.3% women). Among all healthy students, 0.14% had a first-time prescription for a beta-blocker during the exam period with the highest proportion among students aged 19 years (0.39%). Eighty-one percent of the students filled only that single prescription for a beta-blocker during follow-up. During follow-up, 2225 (18.3%) beta-blocker users and 1400 (11.5%) nonbeta-blocker users were prescribed an antidepressant (p risk of antidepressant use (adjusted HRs, 1.68 [95% confidence intervals (CIs), 1.57-1.79], p risk of psychiatric outcomes and might identify psychologically vulnerable students who need special attention.

  18. Fatigue crack growth behaviors of a new burn-resistant highly-stabilized beta titanium alloy

    Institute of Scientific and Technical Information of China (English)

    WU Huan; ZHAO Yongqing; ZENG Weidong; QIAN Li

    2009-01-01

    This article presents the fatigue crack growth (FCG) behaviors of a new burn-resistant highly-stabilized beta Ti40 alloy. The FCG rotes were analyzed. The fracture surfaces and the side surfaces of the test samples were explored. The results show that frequency affects the cracking behaviors of Ti40 alloy. Temperature also plays an important role in Ti40 alloy cracking. At room temperature (25℃), when the frequency increases, the cracking rate changes a little in the range of low stress intensity factor (ΔK), while it changes significantly when ΔK is high. At 500℃, the cracking rate of Ti40 alloy changes significantly during all the course of clacking. The frequency also affects the microstructure patterns of Ti40 alloy. A number of secondary cracks appear in the area more than 200 μm from the main crack at a high ΔK when the fre-quency is 1 Hz, but only a few secondary cracks exist when the frequency is 10 Hz. Facet image is the main image of the fracture surfaces when the frequency is 1 Hz. While, ductile striation occupies most of the area of fracture surfaces when the frequency is 10 Hz.

  19. Association of Beta-2 Microglobulin with Inflammation and Dislipidemia in High-Flux Membrane Hemodialysis Patients.

    Science.gov (United States)

    Topçiu-Shufta, Valdete; Miftari, Ramë; Haxhibeqiri, Valdete; Haxhibeqiri, Shpend

    2016-10-01

    Higher than expected cardiovascular mortality in hemodialysis patients, has been attributed to dyslipidemia as well as inflammation. Beta2-Microglobulin (β2M) is an independent predictor of outcome for hemodialysis patients and a representative substance of middle molecules. In 40 patients in high-flux membrane hemodialysis, we found negative correlation of β2M with high density lipoprotein (r=-0.73, p<0.001) and albumin (r= -0.53, p<0.001) and positive correlation with triglycerides (r=0.69, p<0.001), parathyroid hormone (r=0.58, p < 0.05) and phosphorus (r= 0.53, p<0.001). There was no correlation of β2M with C- reactive protein (CRP) and interleukin-6 (IL-6). During the follow-up period of three years, 6 out of 40 patients have died from cardiovascular events. In high-flux membrane hemodialysis patients, we observed a significant relationship of β2M with dyslipidemia and mineral bone disorders, but there was no correlation with inflammation.

  20. The TF1-ATPase and ATPase activities of assembled alpha 3 beta 3 gamma, alpha 3 beta 3 gamma delta, and alpha 3 beta 3 gamma epsilon complexes are stimulated by low and inhibited by high concentrations of rhodamine 6G whereas the dye only inhibits the alpha 3 beta 3, and alpha 3 beta 3 delta complexes.

    Science.gov (United States)

    Paik, S R; Yokoyama, K; Yoshida, M; Ohta, T; Kagawa, Y; Allison, W S

    1993-12-01

    The ATPase activity of the F1-ATPase from the thermophilic bacterium PS3 is stimulated at concentrations of rhodamine 6G up to about 10 microM where 70% stimulation is observed at 36 degrees C. Half maximal stimulation is observed at about 3 microM dye. At rhodamine 6G concentrations greater than 10 microM, ATPase activity declines with 50% inhibition observed at about 75 microM dye. The ATPase activities of the alpha 3 beta 3 gamma and alpha 3 beta 3 gamma delta complexes assembled from isolated subunits of TF1 expressed in E. coli deleted of the unc operon respond to increasing concentrations of rhodamine 6G nearly identically to the response of TF1. In contrast, the ATPase activities of the alpha 3 beta 3 and alpha 3 beta 3 delta complexes are only inhibited by rhodamine 6G with 50% inhibition observed, respectively, at 35 and 75 microM dye at 36 degrees C. The ATPase activity of TF1 is stimulated up to 4-fold by the neutral detergent, LDAO. In the presence of stimulating concentrations of LDAO, the ATPase activity of TF1 is no longer stimulated by rhodamine 6G, but rather, it is inhibited with 50% inhibition observed at about 30 microM dye at 30 degrees C. One interpretation of these results is that binding of rhodamine 6G to a high-affinity site on TF1 stimulates ATPase activity and unmasks a low-affinity, inhibitory site for the dye which is also exposed by LDAO.

  1. Ba-ion extraction from a high pressure Xe gas for double-beta decay studies with EXO

    CERN Document Server

    Brunner, T; Sabourov, A; Varentsov, V L; Gratta, G; Sinclair, D

    2013-01-01

    An experimental setup is being developed to extract Ba ions from a high-pressure Xe gas environment. It aims to transport Ba ions from 10 bar Xe to vacuum conditions. The setup utilizes a converging-diverging nozzle in combination with a radio-frequency (RF) funnel to move Ba ions into vacuum through the pressure drop of several orders of magnitude. This technique is intended to be used in a future multi-ton detector investigating double-beta decay in $^{136}$Xe. Efficient extraction and detection of Ba ions, the decay product of Xe, would allow for a background-free measurement of the $^{136}$Xe double-beta decay.

  2. Development of high viscosity coatings for advanced Space Shuttle applications

    Science.gov (United States)

    Garofalini, S. H.; Banas, R.; Creedon, J.

    1979-01-01

    Laboratory studies for increasing the thermal resistance of high viscosity coatings for silica reusable surface insulation are presented. The coatings are intended for the reentry temperature associated with advanced Space Shuttle applications which will involve aerodynamic shear forces during entry from earth orbits. Coating viscosity was increased by (1) reduction in the concentration of the low viscosity additive B2O3; (2) reduction in the particle size of the constituent powders in coatings; and (3) addition of a high viscosity glass former (GeO2). A coating system was produced by combining the three methods which showed apparent higher viscosity than the current coating, while satisfying all the current Shuttle Orbiter coating requirements.

  3. Guidelines for Stretch Flanging Advanced High Strength Steels

    Science.gov (United States)

    Sriram, S.; Chintamani, J.

    2005-08-01

    Advanced High Strength Steels (AHSS) are currently being considered for use in closure and structural panels in the automotive industry because of their high potential for affordable weight reduction and improved performance. AHSS such as dual phase steels are currently being used in some vehicle platforms. From a manufacturing perspective, stretch flanging during stamping is an important deformation mode requiring careful consideration of geometry and the die process. This paper presents some geometric and process guidelines for stretch flanging AHSS. Hole expansion experiments were conducted to determine the failure limit for a sheared edge condition. Effects of punching clearance, prestrain and prior strain path on hole expansion were explored in these experiments. In addition, dynamic explicit FE calculations using LS-DYNA were also conducted for a typical stretch flange by varying some key geometric parameters. The experimental and FEA results were then analyzed to yield process and geometric guidelines to enable successful stretch flanging of AHSS.

  4. High resolution X-ray CT for advanced electronics packaging

    Science.gov (United States)

    Oppermann, M.; Zerna, T.

    2017-02-01

    Advanced electronics packaging is a challenge for non-destructive Testing (NDT). More, smaller and mostly hidden interconnects dominate modern electronics components and systems. To solve the demands of customers to get products with a high functionality by low volume, weight and price (e.g. mobile phones, personal medical monitoring systems) often the designers use System-in-Package solutions (SiP). The non-destructive testing of such devices is a big challenge. So our paper will impart fundamentals and applications for non-destructive evaluation of inner structures of electronics packaging for quality assurance and reliability investigations with a focus on X-ray methods, especially on high resolution X-ray computed tomography (CT).

  5. Advanced Rock Drilling Technologies Using High Laser Power

    Science.gov (United States)

    Buckstegge, Frederik; Michel, Theresa; Zimmermann, Maik; Roth, Stephan; Schmidt, Michael

    Drilling through hard rock formations causes high mechanical wear and most often environmental disturbance. For the realization of an Advanced Adiabatic Compressed Air Energy Storage (AA-CAES) power plant a new and efficient method for tunneling utilising laser technology to support mechanical ablation of rock formations will be developed. Laser irradiation of inhomogeneous rock surfaces causes irregular thermal expansion leading to the formation of cracks and splintering as well as melting and slag-formation. This study focuses on the interaction of laser irradiation with calcite, porphyrite and siderite rock formations. A high power disc laser system at 1030nm wavelength is used to investigate the specific energy necessary to remove a unit volume depending on interaction times and applied power. Specific energies have been measured and an increase of fragility and brittleness of the rock surface has been observed.

  6. Beta-Blockers for Exams Identify Students at High Risk of Psychiatric Morbidity

    DEFF Research Database (Denmark)

    Butt, Jawad H; Dalsgaard, Søren; Torp-Pedersen, Christian

    2017-01-01

    OBJECTIVES: Beta-blockers relieve the autonomic symptoms of exam-related anxiety and may be beneficial in exam-related and performance anxiety, but knowledge on related psychiatric outcomes is unknown. We hypothesized that beta-blocker therapy for exam-related anxiety identifies young students at...... (HR, 2.67 [95% CI, 1.04-6.82] p = 0.04). CONCLUSION: In healthy students, use of beta-blockers during the exam period was associated with an increased risk of psychiatric outcomes and might identify psychologically vulnerable students who need special attention.......OBJECTIVES: Beta-blockers relieve the autonomic symptoms of exam-related anxiety and may be beneficial in exam-related and performance anxiety, but knowledge on related psychiatric outcomes is unknown. We hypothesized that beta-blocker therapy for exam-related anxiety identifies young students...... at risk of later psychiatric events. METHODS: Using Danish nationwide administrative registries, we studied healthy students aged 14-30 years (1996-2012) with a first-time claimed prescription for a beta-blocker during the exam period (May-June); students who were prescribed a beta-blocker for medical...

  7. Highly efficient coupling of beta-substituted aminoethane sulfonyl azides with thio acids, toward a new chemical ligation reaction.

    Science.gov (United States)

    Merkx, Remco; Brouwer, Arwin J; Rijkers, Dirk T S; Liskamp, Rob M J

    2005-03-17

    [reaction: see text] A highly efficient coupling of protected beta-substituted aminoethane sulfonyl azides with thio acids is reported. In the case of peptide thio acids, this method encompasses a new chemoselective ligation method. Furthermore, the resulting alpha-amino acyl sulfonamides can be alkylated with suitable electrophiles to obtain densely functionalized sulfonamide scaffolds.

  8. High normal fasting glucose level in obese youth: a marker for insulin resistance and beta cell dysregulation.

    LENUS (Irish Health Repository)

    O'Malley, G

    2010-06-01

    A high but normal fasting plasma glucose level in adults is a risk factor for future development of type 2 diabetes mellitus and cardiovascular disease. We investigated whether normal fasting plasma glucose levels (<5.60 mmol\\/l) are associated with decreases in insulin sensitivity and beta cell function, as well as an adverse cardiovascular profile in obese youth.

  9. Corticospinal beta-range coherence is highly dependent on the pre-stationary motor state.

    Science.gov (United States)

    Omlor, Wolfgang; Patino, Luis; Mendez-Balbuena, Ignacio; Schulte-Mönting, Jürgen; Kristeva, Rumyana

    2011-06-01

    During steady muscle contractions, the human sensorimotor cortex generates oscillations in the beta-frequency range (15-30 Hz) that are coherent with the activity of contralateral spinal motoneurons. This corticospinal coherence is thought to favor stationary motor states, but its mode of operation remains elusive. We hypothesized that corticospinal beta-range coherence depends on the sensorimotor processing state before a steady force task and may thus increase after sensorimotor tuning to dynamic force generation. To test this hypothesis we instructed 16 human subjects to compensate static force after rest as well as after compensating predictable or unpredictable dynamic force with their right index finger. We calculated EEG-EMG coherence, cortical motor spectral power, and the motor performance during the force conditions. Corticospinal beta-coherence during stationary force was excessively elevated if the steady-state contraction was preceded by predictable dynamic force instead of rest, and was highest after unpredictable dynamic force. The beta-power decreased from rest to predictable dynamic force, and was lowest during unpredictable dynamic force. The increase in corticospinal beta-coherence showed a significant negative correlation with the preceding change in beta-power. The tuning to dynamic force did not entail an inferior motor performance during static force. The results imply a correlation between corticospinal beta-range coherence and the computational load of the preceding isometric motor engagement. We suggest beta-range coherence provides a functional corticospinal gateway for steady force-related processing that can override cortical states tuned to dynamic force. The modulation of corticospinal beta-range coherence might thus ensure comparable precision of static force in various motor contexts.

  10. The Cytotoxic Role of Intermittent High Glucose on Apoptosis and Cell Viability in Pancreatic Beta Cells

    Directory of Open Access Journals (Sweden)

    Zhen Zhang

    2014-01-01

    Full Text Available Objectives. Glucose fluctuations are both strong predictor of diabetic complications and crucial factor for beta cell damages. Here we investigated the effect of intermittent high glucose (IHG on both cell apoptosis and proliferation activity in INS-1 cells and the potential mechanisms. Methods. Cells were treated with normal glucose (5.5 mmol/L, constant high glucose (CHG (25 mmol/L, and IHG (rotation per 24 h in 11.1 or 25 mmol/L for 7 days. Reactive oxygen species (ROS, xanthine oxidase (XOD level, apoptosis, cell viability, cell cycle, and expression of cyclinD1, p21, p27, and Skp2 were determined. Results. We found that IHG induced more significant apoptosis than CHG and normal glucose; intracellular ROS and XOD levels were more markedly increased in cells exposed to IHG. Cells treated with IHG showed significant decreased cell viability and increased cell proportion in G0/G1 phase. Cell cycle related proteins such as cyclinD1 and Skp2 were decreased significantly, but expressions of p27 and p21 were increased markedly. Conclusions. This study suggested that IHG plays a more toxic effect including both apoptosis-inducing and antiproliferative effects on INS-1 cells. Excessive activation of cellular stress and regulation of cyclins might be potential mechanism of impairment in INS-1 cells induced by IHG.

  11. Modelling of Sigma Scorpii, a high-mass binary with a Beta Cep variable primary component

    CERN Document Server

    Tkachenko, A; Pavlovski, K; Degroote, P; Papics, P I; Moravveji, E; Lehmann, H; Kolbas, V; Clemer, K

    2014-01-01

    High-mass binary stars are known to show an unexplained discrepancy between the dynamical masses of the individual components and those predicted by models. In this work, we study Sigma Scorpii, a double-lined spectroscopic binary system consisting of two B-type stars residing in an eccentric orbit. The more massive primary component is a Beta Cep-type pulsating variable star. Our analysis is based on a time-series of some 1000 high-resolution spectra collected with the CORALIE spectrograph in 2006, 2007, and 2008. We use two different approaches to determine the orbital parameters of the star; the spectral disentangling technique is used to separate the spectral contributions of the individual components in the composite spectra. The non-LTE based spectrum analysis of the disentangled spectra reveals two stars of similar spectral type and atmospheric chemical composition. Combined with the orbital inclination angle estimate found in the literature, our orbital elements allow a mass estimate of 14.7 +/- 4.5 a...

  12. A high-throughput chemical screen reveals that harmine-mediated inhibition of DYRK1A increases human pancreatic beta cell replication.

    Science.gov (United States)

    Wang, Peng; Alvarez-Perez, Juan-Carlos; Felsenfeld, Dan P; Liu, Hongtao; Sivendran, Sharmila; Bender, Aaron; Kumar, Anil; Sanchez, Roberto; Scott, Donald K; Garcia-Ocaña, Adolfo; Stewart, Andrew F

    2015-04-01

    Types 1 and 2 diabetes affect some 380 million people worldwide. Both ultimately result from a deficiency of functional pancreatic insulin-producing beta cells. Beta cells proliferate in humans during a brief temporal window beginning around the time of birth, with a peak percentage (∼2%) engaged in the cell cycle in the first year of life. In embryonic life and after early childhood, beta cell replication is barely detectable. Whereas beta cell expansion seems an obvious therapeutic approach to beta cell deficiency, adult human beta cells have proven recalcitrant to such efforts. Hence, there remains an urgent need for antidiabetic therapeutic agents that can induce regeneration and expansion of adult human beta cells in vivo or ex vivo. Here, using a high-throughput small-molecule screen (HTS), we find that analogs of the small molecule harmine function as a new class of human beta cell mitogenic compounds. We also define dual-specificity tyrosine-regulated kinase-1a (DYRK1A) as the likely target of harmine and the nuclear factors of activated T cells (NFAT) family of transcription factors as likely mediators of human beta cell proliferation and differentiation. Using three different mouse and human islet in vivo-based models, we show that harmine is able to induce beta cell proliferation, increase islet mass and improve glycemic control. These observations suggest that harmine analogs may have unique therapeutic promise for human diabetes therapy. Enhancing the potency and beta cell specificity of these compounds are important future challenges.

  13. Advanced modeling and simulation to design and manufacture high performance and reliable advanced microelectronics and microsystems.

    Energy Technology Data Exchange (ETDEWEB)

    Nettleship, Ian (University of Pittsburgh, Pittsburgh, PA); Hinklin, Thomas; Holcomb, David Joseph; Tandon, Rajan; Arguello, Jose Guadalupe, Jr. (,; .); Dempsey, James Franklin; Ewsuk, Kevin Gregory; Neilsen, Michael K.; Lanagan, Michael (Pennsylvania State University, University Park, PA)

    2007-07-01

    An interdisciplinary team of scientists and engineers having broad expertise in materials processing and properties, materials characterization, and computational mechanics was assembled to develop science-based modeling/simulation technology to design and reproducibly manufacture high performance and reliable, complex microelectronics and microsystems. The team's efforts focused on defining and developing a science-based infrastructure to enable predictive compaction, sintering, stress, and thermomechanical modeling in ''real systems'', including: (1) developing techniques to and determining materials properties and constitutive behavior required for modeling; (2) developing new, improved/updated models and modeling capabilities, (3) ensuring that models are representative of the physical phenomena being simulated; and (4) assessing existing modeling capabilities to identify advances necessary to facilitate the practical application of Sandia's predictive modeling technology.

  14. Advancement of High Temperature Black Liquor Gasification Technology

    Energy Technology Data Exchange (ETDEWEB)

    Craig Brown; Ingvar Landalv; Ragnar Stare; Jerry Yuan; Nikolai DeMartini; Nasser Ashgriz

    2008-03-31

    Weyerhaeuser operates the world's only commercial high-temperature black liquor gasifier at its pulp mill in New Bern, NC. The unit was started-up in December 1996 and currently processes about 15% of the mill's black liquor. Weyerhaeuser, Chemrec AB (the gasifier technology developer), and the U.S. Department of Energy recognized that the long-term, continuous operation of the New Bern gasifier offered a unique opportunity to advance the state of high temperature black liquor gasification toward the commercial-scale pressurized O2-blown gasification technology needed as a foundation for the Forest Products Bio-Refinery of the future. Weyerhaeuser along with its subcontracting partners submitted a proposal in response to the 2004 joint USDOE and USDA solicitation - 'Biomass Research and Development Initiative'. The Weyerhaeuser project 'Advancement of High Temperature Black Liquor Gasification' was awarded USDOE Cooperative Agreement DE-FC26-04NT42259 in November 2004. The overall goal of the DOE sponsored project was to utilize the Chemrec{trademark} black liquor gasification facility at New Bern as a test bed for advancing the development status of molten phase black liquor gasification. In particular, project tasks were directed at improvements to process performance and reliability. The effort featured the development and validation of advanced CFD modeling tools and the application of these tools to direct burner technology modifications. The project also focused on gaining a fundamental understanding and developing practical solutions to address condensate and green liquor scaling issues, and process integration issues related to gasifier dregs and product gas scrubbing. The Project was conducted in two phases with a review point between the phases. Weyerhaeuser pulled together a team of collaborators to undertake these tasks. Chemrec AB, the technology supplier, was intimately involved in most tasks, and focused primarily on the

  15. Thermal hydraulics analysis of the Advanced High Temperature Reactor

    Energy Technology Data Exchange (ETDEWEB)

    Wang, Dean, E-mail: Dean_Wang@uml.edu [University of Massachusetts Lowell, One University Avenue, Lowell, MA 01854 (United States); Yoder, Graydon L.; Pointer, David W.; Holcomb, David E. [Oak Ridge National Laboratory, 1 Bethel Valley RD #6167, Oak Ridge, TN 37831 (United States)

    2015-12-01

    Highlights: • The TRACE AHTR model was developed and used to define and size the DRACS and the PHX. • A LOFF transient was simulated to evaluate the reactor performance during the transient. • Some recommendations for modifying FHR reactor system component designs are discussed. - Abstract: The Advanced High Temperature Reactor (AHTR) is a liquid salt-cooled nuclear reactor design concept, featuring low-pressure molten fluoride salt coolant, a carbon composite fuel form with embedded coated particle fuel, passively triggered negative reactivity insertion mechanisms, and fully passive decay heat rejection. This paper describes an AHTR system model developed using the Nuclear Regulatory Commission (NRC) thermal hydraulic transient code TRAC/RELAP Advanced Computational Engine (TRACE). The TRACE model includes all of the primary components: the core, downcomer, hot legs, cold legs, pumps, direct reactor auxiliary cooling system (DRACS), the primary heat exchangers (PHXs), etc. The TRACE model was used to help define and size systems such as the DRACS and the PHX. A loss of flow transient was also simulated to evaluate the performance of the reactor during an anticipated transient event. Some initial recommendations for modifying system component designs are also discussed. The TRACE model will be used as the basis for developing more detailed designs and ultimately will be used to perform transient safety analysis for the reactor.

  16. Advances in High Temperature Materials for Additive Manufacturing

    Science.gov (United States)

    Nordin, Nurul Amira Binti; Johar, Muhammad Akmal Bin; Ibrahim, Mohd Halim Irwan Bin; Marwah, Omar Mohd Faizan bin

    2017-08-01

    In today’s technology, additive manufacturing has evolved over the year that commonly known as 3D printing. Currently, additive manufacturing have been applied for many industries such as for automotive, aerospace, medical and other commercial product. The technologies are supported by materials for the manufacturing process to produce high quality product. Plus, additive manufacturing technologies has been growth from the lowest to moderate and high technology to fulfil manufacturing industries obligation. Initially from simple 3D printing such as fused deposition modelling (FDM), poly-jet, inkjet printing, to selective laser sintering (SLS), and electron beam melting (EBM). However, the high technology of additive manufacturing nowadays really needs high investment to carry out the process for fine products. There are three foremost type of material which is polymer, metal and ceramic used for additive manufacturing application, and mostly they were in the form of wire feedstock or powder. In circumstance, it is crucial to recognize the characteristics of each type of materials used in order to understand the behaviours of the materials on high temperature application via additive manufacturing. Therefore, this review aims to provide excessive inquiry and gather the necessary information for further research on additive material materials for high temperature application. This paper also proposed a new material based on powder glass, which comes from recycled tempered glass from automotive industry, having a huge potential to be applied for high temperature application. The technique proposed for additive manufacturing will minimize some cost of modelling with same quality of products compare to the others advanced technology used for high temperature application.

  17. Two cases of takotsubo cardiomyopathy in patients treated with high doses of inhaled beta-2-agonists

    DEFF Research Database (Denmark)

    Thomsen, Camilla Fjord; Jeppesen, Jørgen Lykke; Stride, Nis Ottesen

    2016-01-01

    Takotsubo cardiomyopathy (TCM) is characterised by reversible left ventricular dysfunction in patients presenting with acute coronary syndrome (ACS). TCM is considered multifactorial, and the repetitive exposure to inhaled beta-2-agonists has been suspected to induce TCM in predisposed individuals...

  18. CERN-INO magical Beta-beam experiment: A high precision probe for neutrino parameters

    CERN Document Server

    Agarwalla, S K; Raychaudhuri, A

    2008-01-01

    This talk is an attempt to underscore in detail the physics reach of an experimental set-up where neutrinos produced in a beta-beam facility at CERN would be observed in the proposed large magnetized iron calorimeter detector (ICAL) at the India-based Neutrino Observatory (INO). The "magical" CERN-INO beta-beam set-up offers an excellent avenue to use the "Golden" channel ($\

  19. Development of high strength high toughness third generation advanced high strength steels

    Science.gov (United States)

    Martis, Codrick John

    Third generation advanced high strength steels (AHSS's) are emerging as very important engineering materials for structural applications. These steels have high specific strength and thus will contribute significantly to weight reduction in automotive and other structural component. In this investigation two such low carbon low alloy steels (LCLA) with high silicon content (1.6-2wt %) has been developed. These two steel alloys were subjected to single step and two step austempering in the temperature range of 260-399°C to obtain desired microstructures and mechanical properties. Austempering heat treatment was carried out for 2 hours in a molten salt bath. The microstructures were characterized by X-ray diffraction, scanning electron microscopy, transmission electron microscopy and optical metallography. Quantitative analysis was carried out by image analysis technique. The effect of austempering temperature on the mechanical properties of these two alloys was examined. The influence of microstructures on the mechanical properties of alloys was also studied. Austempering heat treatment resulted in fine carbide free bainitic ferrite and high carbon austenite microstructure in the samples austempered above Ms temperature, whereas tempered martensite and austenite microstructure was obtained in samples austempered below Ms temperature. Yield strength, tensile strength and fracture toughness were found to increase as the austempering temperature decreases, whereas ductility increases as the austempering temperature increases. Tensile strength in the range of 1276MPa -1658 MPa and the fracture toughness in the range of 80-141MPa√m were obtained in these two steels. Volume fractions of different phases present and their lath sizes are related to the mechanical properties. Austempered samples consisting of mixed microstructure of bainitic ferrite and tempered martensite phases resulted in the exceptional combination of strength and toughness.

  20. Betting Against Beta

    DEFF Research Database (Denmark)

    Frazzini, Andrea; Heje Pedersen, Lasse

    .S. equities, 20 international equity markets, Treasury bonds, corporate bonds, and futures; (2) A betting-against-beta (BAB) factor, which is long leveraged low beta assets and short high-beta assets, produces significant positive risk-adjusted returns; (3) When funding constraints tighten, the return...

  1. High-pressure behavior of beta-Ga2O3 nanocrystals

    DEFF Research Database (Denmark)

    Wang, H.; He, Y.; Chen, W.

    2010-01-01

    Freestanding nanocrystalline beta-Ga2O3 particles with an average grain size of 14 nm prepared by chemical method was investigated by angle-dispersive synchrotron x-ray diffraction in diamond-anvil cell up to 64.9 GPa at ambient temperature. The evolution of x-ray diffraction patterns indicated...... that nanocrystalline monoclinic beta-Ga2O3 underwent a phase transition to rhombohedral alpha-Ga2O3. It was found that beta- to alpha-Ga2O3 transition began at about 13.6-16.4 GPa, and extended up to 39.2 GPa. At the highest pressure used, only alpha-Ga2O3 was present, which remained after pressure release. A Birch......-Murnaghan fit to the P-V data yielded a zero-pressure bulk modulus at fixed B-0(')=4: B-0=228(9) GPa and B-0=333(19) GPa for beta-Ga2O3 and alpha-Ga2O3 phases, respectively. We compared our results with bulk beta-Ga2O3, and concluded that the phase-transition pressure and bulk modulus of nanocrystalline beta...

  2. Development of third generation advanced high strength steels

    Science.gov (United States)

    McGrath, Meghan Colleen

    Lightweight duplex steels with combinations of either bainite, acicular ferrite, and austenite or martensite and austenite were investigated as third generation advanced high strength steels targeted for automotive applications. Large additions of manganese (> 13 wt%) and carbon (Strength and ductility were increased while density was decreased with aluminum additions between 2.4 and 5.5 wt% to the steel. This research addressed the dependence of alloying on microstructures and mechanical behavior for high manganese and aluminum duplex steels that were cast and subsequently hot rolled. Duplex steels with different volume fractions of primary delta-ferrite were used to study the crystallography of austenite fanned during the peritectic reaction. Solute profiles across the peritectic interface showed aluminum segregated near the interface which promoted bainitic ferrite formation. Thermal treatments were used to manipulate the concentration and type of oxides and the ferrite plate density was found to correlate with inclusions of low misfit in steels with austenite grain size of 16.5 microm. A steel with bainite and acicular ferrite produced an ultimate tensile strength of 970 MPa and elongation of 40%. The mechanical prope1iies depended on the strengths and size of the microstructural constituents. Work hardening behavior was examined in a steel exhibiting multiple martensitic transformation induced plasticity (gamma-austenite→epsilon-smartensite→alpha-martensite). A strain hardening exponent as high as 1.4 was observed with ultimate tensile strength and elongation as high as 1,165 MPa and 34%.

  3. Advanced High Temperature Reactor Systems and Economic Analysis

    Energy Technology Data Exchange (ETDEWEB)

    Holcomb, David Eugene [ORNL; Peretz, Fred J [ORNL; Qualls, A L [ORNL

    2011-09-01

    The Advanced High Temperature Reactor (AHTR) is a design concept for a large-output [3400 MW(t)] fluoride-salt-cooled high-temperature reactor (FHR). FHRs, by definition, feature low-pressure liquid fluoride salt cooling, coated-particle fuel, a high-temperature power cycle, and fully passive decay heat rejection. The AHTR's large thermal output enables direct comparison of its performance and requirements with other high output reactor concepts. As high-temperature plants, FHRs can support either high-efficiency electricity generation or industrial process heat production. The AHTR analysis presented in this report is limited to the electricity generation mission. FHRs, in principle, have the potential to be low-cost electricity producers while maintaining full passive safety. However, no FHR has been built, and no FHR design has reached the stage of maturity where realistic economic analysis can be performed. The system design effort described in this report represents early steps along the design path toward being able to predict the cost and performance characteristics of the AHTR as well as toward being able to identify the technology developments necessary to build an FHR power plant. While FHRs represent a distinct reactor class, they inherit desirable attributes from other thermal power plants whose characteristics can be studied to provide general guidance on plant configuration, anticipated performance, and costs. Molten salt reactors provide experience on the materials, procedures, and components necessary to use liquid fluoride salts. Liquid metal reactors provide design experience on using low-pressure liquid coolants, passive decay heat removal, and hot refueling. High temperature gas-cooled reactors provide experience with coated particle fuel and graphite components. Light water reactors (LWRs) show the potentials of transparent, high-heat capacity coolants with low chemical reactivity. Modern coal-fired power plants provide design experience

  4. High temperature auto-propagating synthesis of advanced ceramic materials

    Energy Technology Data Exchange (ETDEWEB)

    Cao, G.; Morbidelli, M. (Cagliari Univ. (Italy). Dip. di Ingegneria Chimica e Materiali)

    1993-01-01

    This paper analyzes the modelling and experimental aspects relative to the production of advanced ceramic materials (i.e., carbides, borides and silicides of suitable transition metals) by means of high temperature auto-propagating synthesis. This process is characterized by a reaction front which, once triggered, auto-propagates itself through the reagent mix in the form of a combustion wave, taking advantage of the strong exothermic nature of the reaction itself. The analysis in this paper includes an investigation of the capability of models to accurately simulate the synthesis process. The validity of one particular model is checked by comparison with experimental results reported in literature. In addition, non-linear parametric sensitivity analysis is used to define 'a priori' suitable operating conditions which would guarantee ignition of the reagent mix and contemporaneously allow the optimization of process energy consumption.

  5. Advances toward high spectral resolution quantum X-ray calorimetry

    Science.gov (United States)

    Moseley, S. H.; Kelley, R. L.; Schoelkopf, R. J.; Szymkowiak, A. E.; Mccammon, D.

    1988-01-01

    Thermal detectors for X-ray spectroscopy combining high spectral resolution and quantum efficiency have been developed. These microcalorimeters measure the energy released in the absorption of a single photon by sensing the rise in temperature of a small absorbing structure. The ultimate energy resolution of such a device is limited by the thermodynamic power fluctuations in the thermal link between the calorimeter and isothermal bath and can in principle be made as low as 1 eV. The performance of a real device is degraded due to noise contributions such as excess 1/f noise in the thermistor and incomplete conversion of energy into phonons. The authors report some recent advances in thermometry, X-ray absorption and thermalization, fabrication techniques, and detector optimization in the presence of noise. These improvements have resulted in a device with a spectral resolution of 17 eV FWHM, measured at 6 keV.

  6. Low or High Fractionation Dose {beta}-Radiotherapy for Pterygium? A Randomized Clinical Trial

    Energy Technology Data Exchange (ETDEWEB)

    Viani, Gustavo Arruda, E-mail: gusviani@gmail.com [Department of Radiation Oncology, Marilia Medicine School, Sao Paulo, SP (Brazil); De Fendi, Ligia Issa; Fonseca, Ellen Carrara [Department of Ophthalmology, Marilia Medicine School, Sao Paulo, SP (Brazil); Stefano, Eduardo Jose [Department of Radiation Oncology, Marilia Medicine School, Sao Paulo, SP (Brazil)

    2012-02-01

    Purpose: Postoperative adjuvant treatment using {beta}-radiotherapy (RT) is a proven technique for reducing the recurrence of pterygium. A randomized trial was conducted to determine whether a low fractionation dose of 2 Gy within 10 fractions would provide local control similar to that after a high fractionation dose of 5 Gy within 7 fractions for surgically resected pterygium. Methods: A randomized trial was conducted in 200 patients (216 pterygia) between February 2006 and July 2007. Only patients with fresh pterygium resected using a bare sclera method and given RT within 3 days were included. Postoperative RT was delivered using a strontium-90 eye applicator. The pterygia were randomly treated using either 5 Gy within 7 fractions (Group 1) or 2 Gy within 10 fractions (Group 2). The local control rate was calculated from the date of surgery. Results: Of the 216 pterygia included, 112 were allocated to Group 1 and 104 to Group 2. The 3-year local control rate for Groups 1 and 2 was 93.8% and 92.3%, respectively (p = .616). A statistically significant difference for cosmetic effect (p = .034), photophobia (p = .02), irritation (p = .001), and scleromalacia (p = .017) was noted in favor of Group 2. Conclusions: No better local control rate for postoperative pterygium was obtained using high-dose fractionation vs. low-dose fractionation. However, a low-dose fractionation schedule produced better cosmetic effects and resulted in fewer symptoms than high-dose fractionation. Moreover, pterygia can be safely treated in terms of local recurrence using RT schedules with a biologic effective dose of 24-52.5 Gy{sub 10.}.

  7. Hemoglobin Wood beta97(FG4) His replaced by Leu. A new high-oxygen-affinity hemoglobin associated with familial erythrocytosis.

    Science.gov (United States)

    Taketa, F; Huang, Y P; Libnoch, J A; Dessel, B H

    1975-08-19

    The characterization of hemoglobin Wood (beta97(FG4) His replaced by Leu), a high oxygen affinity hemoglobin with reduced Hill constant is described. The amino acid substitution occurs at the alpha1beta2 interface, in the same position as in hemoglobin Malmö (beta97(FG4) His replaced by Gln) and in an homologous position when compared with hemoglobins Chesapeake (alpha92(FG4) Arg replaced by Leu) and J. Capetown (alpha92(fg4) arg replaced by Gln).

  8. Autoantibodies to IA-2beta improve diabetes risk assessment in high-risk relatives

    DEFF Research Database (Denmark)

    Achenbach, P; Bonifacio, E; Williams, A J K;

    2008-01-01

    . METHODS: Autoantibodies to insulin (IAA), glutamate decarboxylase (GADA) and IA-2 (IA2A) were measured in 549 participants at study entry, and IA2A-positive samples tested for IA2betaA. First-phase insulin response (FPIR) and oral glucose tolerance were determined at baseline. RESULTS: Of 212 ICA/IA2A......-positive participants (median age 12.1 years; 57% male), 113 developed diabetes (5 year cumulative risk 56%), and 148 were also GADA-positive and IAA-positive (4Ab-positive). IA2betaA were detected in 137 (65%) ICA/IA2A-positive participants and were associated with an increased 5 year diabetes risk (IA2beta......A-positive 65 vs 39% in IA2betaA-negative, p=0.0002). The effect was most marked in 4Ab-positive relatives (72% vs 52%, p=0.003). Metabolic testing further refined risk assessment. Among 101 4Ab-positive relatives with IA2betaA, the 5 year risk was 94% in those with a low FPIR (vs 50% in those with a normal...

  9. A High Temperature Electrochemical Energy Storage System Based on Sodium Beta-Alumina Solid Electrolyte (Base)

    Energy Technology Data Exchange (ETDEWEB)

    Anil Virkar

    2008-03-31

    This report summarizes the work done during the period September 1, 2005 and March 31, 2008. Work was conducted in the following areas: (1) Fabrication of sodium beta{double_prime} alumina solid electrolyte (BASE) using a vapor phase process. (2) Mechanistic studies on the conversion of {alpha}-alumina + zirconia into beta{double_prime}-alumina + zirconia by the vapor phase process. (3) Characterization of BASE by X-ray diffraction, SEM, and conductivity measurements. (4) Design, construction and electrochemical testing of a symmetric cell containing BASE as the electrolyte and NaCl + ZnCl{sub 2} as the electrodes. (5) Design, construction, and electrochemical evaluation of Na/BASE/ZnCl{sub 2} electrochemical cells. (6) Stability studies in ZnCl{sub 2}, SnCl{sub 2}, and SnI{sub 4} (7) Design, assembly and testing of planar stacks. (8) Investigation of the effect of porous surface layers on BASE on cell resistance. The conventional process for the fabrication of sodium ion conducting beta{double_prime}-alumina involves calcination of {alpha}-alumina + Na{sub 2}CO{sub 3} + LiNO{sub 3} at 1250 C, followed by sintering powder compacts in sealed containers (platinum or MgO) at {approx}1600 C. The novel vapor phase process involves first sintering a mixture of {alpha}-alumina + yttria-stabilized zirconia (YSZ) into a dense ceramic followed by exposure to soda vapor at {approx}1450 C to convert {alpha}-alumina into beta{double_prime}-alumina. The vapor phase process leads to a high strength BASE, which is also resistant to moisture attack, unlike BASE made by the conventional process. The PI is the lead inventor of the process. Discs and tubes of BASE were fabricated in the present work. In the conventional process, sintering of BASE is accomplished by a transient liquid phase mechanism wherein the liquid phase contains NaAlO{sub 2}. Some NaAlO{sub 2} continues to remain at grain boundaries; and is the root cause of its water sensitivity. In the vapor phase process, Na

  10. Advanced Ultra-High Speed Motor for Drilling

    Energy Technology Data Exchange (ETDEWEB)

    Impact Technologies LLC; University of Texas at Arlington

    2007-03-31

    Three (3) designs have been made for two sizes, 6.91 cm (2.72 inch) and 4.29 cm (1.69 inch) outer diameters, of a patented inverted configured Permanent Magnet Synchronous Machines (PMSM) electric motor specifically for drilling at ultra-high rotational speeds (10,000 rpm) and that can utilize advanced drilling methods. Benefits of these motors are stackable power sections, full control (speed and direction) of downhole motors, flow hydraulics independent of motor operation, application of advanced drilling methods (water jetting and abrasive slurry jetting), and the ability of signal/power electric wires through motor(s). Key features of the final designed motors are: fixed non-rotating shaft with stator coils attached; rotating housing with permanent magnet (PM) rotor attached; bit attached to rotating housing; internal channel(s) in a nonrotating shaft; electric components that are hydrostatically isolated from high internal pressure circulating fluids ('muds') by static metal to metal seals; liquid filled motor with smoothed features for minimized turbulence in the motor during operation; and new inverted coated metal-metal hydrodynamic bearings and seals. PMSM, Induction and Switched Reluctance Machines (SRM), all pulse modulated, were considered, but PMSM were determined to provide the highest power density for the shortest motors. Both radial and axial electric PMSM driven motors were designed with axial designs deemed more rugged for ultra-high speed, drilling applications. The 6.91 cm (2.72 inch) OD axial inverted motor can generate 4.18KW (5.61 Hp) power at 10,000 rpm with a 4 Nm (2.95 ft-lbs) of torque for every 30.48 cm (12 inches) of power section. The 6.91 cm (2.72 inch) OD radial inverted motor can generate 5.03 KW (6.74 Hp) with 4.8 Nm (3.54 ft-lb) torque at 10,000 rpm for every 30.48 cm (12 inches) of power section. The 4.29 cm (1.69 inch) OD radial inverted motor can generate 2.56 KW (3.43 Hp) power with 2.44 Nm (1.8 ft-lb) torque at

  11. Inhibition of human and rat 11beta-hydroxysteroid dehydrogenase type 1 by 18beta-glycyrrhetinic acid derivatives.

    Science.gov (United States)

    Su, Xiangdong; Vicker, Nigel; Lawrence, Harshani; Smith, Andrew; Purohit, Atul; Reed, Michael J; Potter, Barry V L

    2007-05-01

    11beta-Hydroxysteroid dehydrogenase type 1 (11beta-HSD1) plays an important role in regulating the cortisol availability to bind to corticosteroid receptors within specific tissue. Recent advances in understanding the molecular mechanisms of metabolic syndrome indicate that elevation of cortisol levels within specific tissues through the action of 11beta-HSD1 could contribute to the pathogenesis of this disease. Therefore, selective inhibitors of 11beta-HSD1 have been investigated as potential treatments for metabolic diseases, such as diabetes mellitus type 2 or obesity. Here we report the discovery and synthesis of some 18beta-glycyrrhetinic acid (18beta-GA) derivatives (2-5) and their inhibitory activities against rat hepatic11beta-HSD1 and rat renal 11beta-HSD2. Once the selectivity over the rat type 2 enzyme was established, these compounds' ability to inhibit human 11beta-HSD1 was also evaluated using both radioimmunoassay (RIA) and homogeneous time resolved fluorescence (HTRF) methods. The 11-modified 18beta-GA derivatives 2 and 3 with apparent selectivity for rat 11beta-HSD1 showed a high percentage inhibition for human microsomal 11beta-HSD1 at 10 microM and exhibited IC50 values of 400 and 1100 nM, respectively. The side chain modified 18beta-GA derivatives 4 and 5, although showing selectivity for rat 11beta-HSD1 inhibited human microsomal 11beta-HSD1 with IC50 values in the low micromolar range.

  12. [Determination of alpha-arbutin, beta-arbutin and niacinamide in cosmetics by high performance liquid chromatography].

    Science.gov (United States)

    Cheng, Peng; Chen, Meilan; Zhu, Yan

    2010-01-01

    A high performance liquid chromatography (HPLC) method for the determination of two optical isomers of arbutin (alpha-arbutin and beta-arbutin) and niacinamide in cosmetics was developed. The samples were extracted by the mixture of salt water and chloroform (2:1, v/v). The separation was performed on an ODS-BP column (200 mm x 4.6 mm, 5 microm, Elite) with methanol-water (10:90, v/v) as the mobile phase at a flow rate of 0.5 mL/min and 25 degrees C. The detection wavelength was set at 220 nm and the sample injection volume was 20 microL. There were good linear relationships between the mass concentration and the peak areas of alpha-arbutin, beta-arbutin and niacinamide in the ranges of 0.07-50, 0.06-50 and 0.05-50 mg/L, respectively. The relative standard deviations (RSDs, n = 7) of alpha-arbutin, beta-arbutin and niacinamide were 1.65%, 1.73% and 1.33%, respectively. The proposed method has been applied for the determination of alpha-arbutin, beta-arbutin and niacinamide in cosmetics with recoveries of 91.7%-109.6%. This method is rapid, simple and suitable for the detection of whitening ingredients in cosmetic.

  13. High-affinity binding of fungal beta-glucan fragments to soybean (Glycine max L.) microsomal fractions and protoplasts.

    Science.gov (United States)

    Cosio, E G; Pöpperl, H; Schmidt, W E; Ebel, J

    1988-08-01

    We have recently reported the existence of binding sites in soybean membranes for a beta-glucan fraction derived from the fungal pathogen Phytophthora megasperma f. sp. glycinea, which may play a role in the elicitor-mediated phytoalexin response of this plant [Schmidt, W. E. & Ebel, J. (1987) Proc. Natl Acad. Sci. USA 84, 4117-4121]. The specificity of beta-glucan binding to soybean membranes has now been investigated using a variety of competing polyglucans and oligoglucans of fungal origin. P. megasperma beta-glucan binding showed high apparent affinity for branched glucans with degrees of polymerization greater than 12. Binding affinity showed good correlation with elicitor activity as measured in a soybean cotyledon bioassay. Modification of the glucans at the reducing end with phenylalkylamine reagents had no effect on binding affinity. This characteristic was used to synthesize an oligoglucosyl tyramine derivative suitable for radioiodination. The 125I-glucan (15-30 Ci/mmol) provided higher sensitivity and lower detection limits for the binding assays while behaving in a manner identical to the [3H]glucan used previously. More accurate determinations of the Kd value for glucan binding indicated a higher affinity than previously shown (37 nM versus 200 nM). The 125I-glucan was used to provide the first reported evidence of specific binding of a fungal beta-glucan fraction in vivo to soybean protoplasts. The binding affinity to protoplasts proved identical to that found in microsomal fractions.

  14. Histone hyperacetylation within the beta-globin locus is context-dependent and precedes high-level gene expression.

    Science.gov (United States)

    Fromm, George; de Vries, Christina; Byron, Rachel; Fields, Jennifer; Fiering, Steven; Groudine, Mark; Bender, M A; Palis, James; Bulger, Michael

    2009-10-15

    Active gene promoters are associated with covalent histone modifications, such as hyperacetylation, which can modulate chromatin structure and stabilize binding of transcription factors that recognize these modifications. At the beta-globin locus and several other loci, however, histone hyperacetylation extends beyond the promoter, over tens of kilobases; we term such patterns of histone modifications "hyperacetylated domains." Little is known of either the mechanism by which these domains form or their function. Here, we show that domain formation within the murine beta-globin locus occurs before either high-level gene expression or erythroid commitment. Analysis of beta-globin alleles harboring deletions of promoters or the locus control region demonstrates that these sequences are not required for domain formation, suggesting the existence of additional regulatory sequences within the locus. Deletion of embryonic globin gene promoters, however, resulted in the formation of a hyperacetylated domain over these genes in definitive erythroid cells, where they are otherwise inactive. Finally, sequences within beta-globin domains exhibit hyperacetylation in a context-dependent manner, and domains are maintained when transcriptional elongation is inhibited. These data narrow the range of possible mechanisms by which hyperacetylated domains form.

  15. The development of advanced robotics technology in high radiation environment

    Energy Technology Data Exchange (ETDEWEB)

    Lee, Yong Bum; Cho, Jaiwan; Lee, Nam Ho; Choi, Young Soo; Park, Soon Yong; Lee, Jong Min; Park, Jin Suk; Kim, Seung Ho; Kim, Byung Soo; Moon, Byung Soo

    1997-07-01

    In the tele-operation technology using tele-presence in high radiation environment, stereo vision target tracking by centroid method, vergence control of stereo camera by moving vector method, stereo observing system by correlation method, horizontal moving axis stereo camera, and 3 dimensional information acquisition by stereo image is developed. Also, gesture image acquisition by computer vision and construction of virtual environment for remote work in nuclear power plant. In the development of intelligent control and monitoring technology for tele-robot in hazardous environment, the characteristics and principle of robot operation. And, robot end-effector tracking algorithm by centroid method and neural network method are developed for the observation and survey in hazardous environment. 3-dimensional information acquisition algorithm by structured light is developed. In the development of radiation hardened sensor technology, radiation-hardened camera module is designed and tested. And radiation characteristics of electric components is robot system is evaluated. Also 2-dimensional radiation monitoring system is developed. These advanced critical robot technology and telepresence techniques developed in this project can be applied to nozzle-dam installation /removal robot system, can be used to realize unmanned remotelization of nozzle-dam installation / removal task in steam generator of nuclear power plant, which can be contributed for people involved in extremely hazardous high radioactivity area to eliminate their exposure to radiation, enhance their task safety, and raise their working efficiency. (author). 75 refs., 21 tabs., 15 figs.

  16. High temperature, harsh environment sensors for advanced power generation systems

    Science.gov (United States)

    Ohodnicki, P. R.; Credle, S.; Buric, M.; Lewis, R.; Seachman, S.

    2015-05-01

    One mission of the Crosscutting Technology Research program at the National Energy Technology Laboratory is to develop a suite of sensors and controls technologies that will ultimately increase efficiencies of existing fossil-fuel fired power plants and enable a new generation of more efficient and lower emission power generation technologies. The program seeks to accomplish this mission through soliciting, managing, and monitoring a broad range of projects both internal and external to the laboratory which span sensor material and device development, energy harvesting and wireless telemetry methodologies, and advanced controls algorithms and approaches. A particular emphasis is placed upon harsh environment sensing for compatibility with high temperature, erosive, corrosive, and highly reducing or oxidizing environments associated with large-scale centralized power generation. An overview of the full sensors and controls portfolio is presented and a selected set of current and recent research successes and on-going projects are highlighted. A more detailed emphasis will be placed on an overview of the current research thrusts and successes of the in-house sensor material and device research efforts that have been established to support the program.

  17. Hydrogen Embrittlement of Automotive Advanced High-Strength Steels

    Science.gov (United States)

    Lovicu, Gianfranco; Bottazzi, Mauro; D'Aiuto, Fabio; De Sanctis, Massimo; Dimatteo, Antonella; Santus, Ciro; Valentini, Renzo

    2012-11-01

    Advanced high-strength steels (AHSS) have a better combination between strength and ductility than conventional HSS, and higher crash resistances are obtained in concomitance with weight reduction of car structural components. These steels have been developed in the last few decades, and their use is rapidly increasing. Notwithstanding, some of their important features have to be still understood and studied in order to completely characterize their service behavior. In particular, the high mechanical resistance of AHSS makes hydrogen-related problems a great concern for this steel grade. This article investigates the hydrogen embrittlement (HE) of four AHSS steels. The behavior of one transformation induced plasticity (TRIP), two martensitic with different strength levels, and one hot-stamping steels has been studied using slow strain rate tensile (SSRT) tests on electrochemically hydrogenated notched samples. The embrittlement susceptibility of these AHSS steels has been correlated mainly to their strength level and to their microstructural features. Finally, the hydrogen critical concentrations for HE, established by SSRT tests, have been compared to hydrogen contents absorbed during the painting process of a body in white (BIW) structure, experimentally determined during a real cycle in an industrial plant.

  18. Characteristics in Paintability of Advanced High Strength Steels

    Energy Technology Data Exchange (ETDEWEB)

    Park, Ha Sun [POSLAB, POSCO, Gwangyang (Korea, Republic of)

    2007-06-15

    It is expected that advanced high strength steels (AHSS) would be widely used for vehicles with better performance in automotive industries. One of distinctive features of AHSS is the high value of carbon equivalent (Ceq), which results in the different properties in formability, weldability and paintability from those of common grade of steel sheets. There is an exponential relation between Ceq and electric resistance, which seems also to have correlation with the thickness of electric deposition (ED) coat. higher value of Ceq of AHSS lower the thickness of ED coat of AHSS. Some elements of AHSS such as silicon, if it is concentrated on the surface, affect negatively the formation of phosphates. In this case, silicon itself doesn't affect the phosphate, but its oxide does. This phenomenon is shown dramatically in the welding area. Arc welding or laser welding melts the base material. In the process of cooling of AHSS melt, the oxides of Si and Mn are easily concentrated on the surface of boundary between welded and non welded area because Si and Mn cold be oxidized easier than Fe. More oxide on surface results in poor phosphating and ED coating. This is more distinctive in AHSS than in mild steel. General results on paintability of AHSS would be reported, being compared to those of mild steel

  19. Highly Durable Catalysts for Ignition of Advanced Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — This proposed SBIR Phase I addresses the development of catalysts and technology for the ignition of advanced monopropellants consisting of mixtures of...

  20. Advanced Nanostructured Cathode for Ultra High Specific Energy Lithium Ion Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Integrate advanced nanotechnology with energy storage technology to develop advanced cathode materials for use in Li-ion batteries while maintaining a high level of...

  1. Beta Thalassemia

    Science.gov (United States)

    Beta thalassemia is found in people of Mediterranean, Middle Eastern, African, South Asian (Indian, Pakistani, etc.), Southeast Asian and Chinese descent. 1 Beta Thalassemia ßß Normal beta globin genes found on chromosomes ...

  2. Co-existence of Whistler Waves with Kinetic Alfven Wave Turbulence for the High-beta Solar Wind Plasma

    CERN Document Server

    Mithaiwala, Manish; Crabtree, Chris; Ganguli, Gurudas

    2012-01-01

    It is shown that the dispersion relation for whistler waves is identical for a high or low beta plasma. Furthermore in the high-beta solar wind plasma whistler waves meet the Landau resonance with electrons for velocities less than the thermal speed, and consequently the electric force is small compared to the mirror force. As whistlers propagate through the inhomogeneous solar wind, the perpendicular wave number increases through refraction, increasing the Landau damping rate. However, the whistlers can survive because the background kinetic Alfven wave turbulence creates a plateau by quasilinear diffusion in the solar wind electron distribution at small velocities. It is found that for whistler energy density of only ~10^-3 that of the kinetic Alfven waves, the quasilinear diffusion rate due to whistlers is comparable to KAW. Thus very small amplitude whistler turbulence can have a significant consequence on the evolution of the solar wind electron distribution function.

  3. Pattern recognition of $^{136}$Xe double beta decay events and background discrimination in a high pressure Xenon TPC

    CERN Document Server

    Cebrian, S; Gomez, H; Herrera, D C; Iguaz, F J; Irastorza, I G; Luzon, G; Segui, L; Tomas, A

    2013-01-01

    High pressure gas detectors offer advantages for the detection of rare events, where background reduction is crucial. For the neutrinoless double beta decay of 136Xe a high pressure xenon gas Time Projection Chamber (TPC) combines a good energy resolution and a detailed topological information of each event. The ionization topology of the double beta decay event of 136Xe in gaseous xenon has a characteristic shape defined by the two straggling electron tracks ending up in two higher ionization charge density blobs. With a properly pixelized readout, this topological information is invaluable to perform powerful background discrimination. In this study we carry out detailed simulations of the signal topology, as well as the competing topologies from gamma events that typically compose the background at these energies. We define observables based on graph theory concepts and develop automated discrimination algorithms which reduce the background level in around three orders of magnitude while keeping signal eff...

  4. High beta and second region stability analysis and ICRF edge modeling. Progress report, March 15, 1988--May 14, 1989

    Energy Technology Data Exchange (ETDEWEB)

    1989-12-31

    This report describes the tasks accomplished under Department of Energy contract {number_sign}DE-FG02-86ER53236 in modeling the edge plasma-antenna interaction that occurs during Ion Cyclotron Range of Frequency (ICRF) heating. This work has resulted in the development of several codes which determine kinetic and fluid modifications to the edge plasma. When used in combination, these code predict the level of impurity generation observed in experiments on the experiments on the Princeton Large Torus. In addition, these models suggest improvements to the design of ICRF antennas. Also described is progress made on high beta and second region analysis. Code development for a comprehensive infernal mode analysis code is nearing completion. A method has been developed for parameterizing the second region of stability and is applied to circular cross section tokamas. Various studies for high beta experimental devices such as PBX-M and DIII-D have been carried out and are reported on.

  5. Determination of Beta-Lactam residues in milk by high performance liquid chromatography

    Directory of Open Access Journals (Sweden)

    Roseane Brandão de Brito

    2006-01-01

    Full Text Available A high performance liquid chromatographic method to assay beta-lactam residues in milk was developed and validated. Milk samples were spiked with standard solutions and deproteinated. The extract was cleaned-up on C18 SPE cartridge, the antibiotics eluted with acetonitrile:water (50:50 v/v and derivatized with acetic anhydride and 1-methyl-imidazole solution containing HgCl2. The chromatographic analysis was performed on C18 column using mobile phase consisting of acetonitrile and phosphate buffer (pH 6.5 in the presence of Na2S2O3 gradient and detection at 325 nm. The method was selective for ampicillin, penicillin G and penicillin V, the latter used as internal standard. Average recoveries for ampicillin and penicillin G ranged, respectively, from 60.0% to 104.9% and from 82.7% to 109.2%, with coefficients of variation from 11.1% to 24.6%, and from 2.1% to 25.2%, indicating accuracy and precision. Detection limit of 4.0 µg/L for ampicillin and 3.0 µg/L for penicillin G, and quantification limits of 4.0 µg/L for both were estimated.Um método para determinar resíduos de antibióticos beta-lactâmicos em leite por cromatografia líquida de alta eficiência (CLAE foi desenvolvido e validado. Amostras brancas foram adicionadas de padrão e desproteinizadas. O extrato foi purificado por extração em fase sólida C18, os antibióticos eluídos com acetonitrila:água (50:50 v/v e posteriormente derivatizados com anidrido acético e solução de 1-metil-imidazol contendo HgCl2. A análise cromatográfica foi realizada utilizando coluna C18, fase móvel composta por acetonitrila e tampão fosfato pH 6,5, na presença de Na2S2O3 em gradiente e detecção a 325 nm. O método foi seletivo para ampicilina, penicilina G e penicilina V, sendo este último utilizado como padrão interno. As médias de recuperação para ampicilina e penicilina G situaram-se, respectivamente, na faixa de 60,0% a 104,9% e de 82,7% a 109,2%, com coeficientes de varia

  6. Advances in High Throughput Screening of Biomass Recalcitrance (Poster)

    Energy Technology Data Exchange (ETDEWEB)

    Turner, G. B.; Decker, S. R.; Tucker, M. P.; Law, C.; Doeppke, C.; Sykes, R. W.; Davis, M. F.; Ziebell, A.

    2012-06-01

    This was a poster displayed at the Symposium. Advances on previous high throughput screening of biomass recalcitrance methods have resulted in improved conversion and replicate precision. Changes in plate reactor metallurgy, improved preparation of control biomass, species-specific pretreatment conditions, and enzymatic hydrolysis parameters have reduced overall coefficients of variation to an average of 6% for sample replicates. These method changes have improved plate-to-plate variation of control biomass recalcitrance and improved confidence in sugar release differences between samples. With smaller errors plant researchers can have a higher degree of assurance more low recalcitrance candidates can be identified. Significant changes in plate reactor, control biomass preparation, pretreatment conditions and enzyme have significantly reduced sample and control replicate variability. Reactor plate metallurgy significantly impacts sugar release aluminum leaching into reaction during pretreatment degrades sugars and inhibits enzyme activity. Removal of starch and extractives significantly decreases control biomass variability. New enzyme formulations give more consistent and higher conversion levels, however required re-optimization for switchgrass. Pretreatment time and temperature (severity) should be adjusted to specific biomass types i.e. woody vs. herbaceous. Desalting of enzyme preps to remove low molecular weight stabilizers and improved conversion levels likely due to water activity impacts on enzyme structure and substrate interactions not attempted here due to need to continually desalt and validate precise enzyme concentration and activity.

  7. Advanced metal alloy systems for massive high-current photocathodes

    Science.gov (United States)

    Tkachenko, V. G.; Kondrashev, A. I.; Maksimchuk, I. N.

    2010-03-01

    The physical principles of precise alloying are formulated with the aim of increasing the low quantum efficiency (QE) of suitable simple metals (Mg, Al, Cu) as well as of decreasing their electron work function ( e φ) in the UV spectral range. The new approach provides valuable information for elucidating the origin of photoemission enhancement in bulk metal-based alloy systems. Bulk in-situ nanoclustering promises to be the most effective way of producing a much higher QE and a lower e φ in simple metals. In this article we show that the quantum efficiency of the metal-based alloys Mg-Ba, Al-Li, and Cu-BaO is considerably higher than the simple metals Mg, Al, and Cu, respectively. The spectral characteristics of the Mg-Ba, Al-Li and Cu-BaO systems obey the well-known Fowler square law for a near-free-electron model. The advanced metal alloys systems are promising photocathode materials usable for generation of high brightness electron beams.

  8. Advanced Ceramic Matrix Composites (CMCs) for High Temperature Applications

    Science.gov (United States)

    Singh, M.

    2005-01-01

    Advanced ceramic matrix composites (CMCs) are enabling materials for a number of demanding applications in aerospace, energy, and nuclear industries. In the aerospace systems, these materials are being considered for applications in hot sections of jet engines such as the combustor liner, vanes, nozzle components, nose cones, leading edges of reentry vehicles, and space propulsion components. Applications in the energy and environmental industries include radiant heater tubes, heat exchangers, heat recuperators, gas and diesel particulate filters, and components for land based turbines for power generation. These materials are also being considered for use in the first wall and blanket components of fusion reactors. In the last few years, a number of CMC components have been developed and successfully tested for various aerospace and ground based applications. However, a number of challenges still remain slowing the wide scale implementation of these materials. They include robust fabrication and manufacturing, assembly and integration, coatings, property modeling and life prediction, design codes and databases, repair and refurbishment, and cost. Fabrication of net and complex shape components with high density and tailorable matrix properties is quite expensive, and even then various desirable properties are not achievable. In this presentation, a number of examples of successful CMC component development and testing will be provided. In addition, critical need for robust manufacturing, joining and assembly technologies in successful implementation of these systems will be discussed.

  9. Advanced High Strength Steel in Auto Industry: an Overview

    Directory of Open Access Journals (Sweden)

    N. Baluch

    2014-08-01

    Full Text Available The world’s most common alloy, steel, is the material of choice when it comes to making products as diverse as oil rigs to cars and planes to skyscrapers, simply because of its functionality, adaptability, machine-ability and strength. Newly developed grades of Advanced High Strength Steel (AHSS significantly outperform competing materials for current and future automotive applications. This is a direct result of steel’s performance flexibility, as well as of its many benefits including low cost, weight reduction capability, safety attributes, reduced greenhouse gas emissions and superior recyclability. To improve crash worthiness and fuel economy, the automotive industry is, increasingly, using AHSS. Today, and in the future, automotive manufacturers must reduce the overall weight of their cars. The most cost-efficient way to do this is with AHSS. However, there are several parameters that decide which of the AHSS types to be used; the most important parameters are derived from the geometrical form of the component and the selection of forming and blanking methods. This paper describes the different types of AHSS, highlights their advantages for use in auto metal stampings, and discusses about the new challenges faced by stampers, particularly those serving the automotive industry.

  10. Numerical Design of Drawbeads for Advanced High Strength Steel Sheets

    Science.gov (United States)

    Keum, Y. T.; Kim, D. J.; Kim, G. S.

    2010-06-01

    The map for designing the drawbeads used in the stamping dies for advanced high strength steel (AHSS) sheets is numerically investigated and its application is introduced. The bending limit of AHSS sheet is determined from the extreme R/t's obtained simulating numerically the plane-strain process formed by the cylindrical punches and dies with various radii. In addition, the forming allowance defined by the difference between FLC0 and the strain after passing the drawbead, which is observed by the numerical simulation of drawbead pulling test, is computed. Based on the bending limit and forming allowance, the design map for determining the height, width, and shoulder radius of the drawbead which are key parameters in the drawbead design and depend on the restraining force is constructed by aid of the equivalent drawbead model. A drawbead of the stamping die for forming a channel-typed panel is designed by using the design map, and the formability and springback of the panel to be formed are numerically evaluated, from which the availability of the design map is demonstrated.

  11. Advanced Very High Resolution Radiometer Normalized Difference Vegetation Index Composites

    Science.gov (United States)

    ,

    2005-01-01

    The Advanced Very High Resolution Radiometer (AVHRR) is a broad-band scanner with four to six bands, depending on the model. The AVHRR senses in the visible, near-, middle-, and thermal- infrared portions of the electromagnetic spectrum. This sensor is carried on a series of National Oceanic and Atmospheric Administration (NOAA) Polar Orbiting Environmental Satellites (POES), beginning with the Television InfraRed Observation Satellite (TIROS-N) in 1978. Since 1989, the United States Geological Survey (USGS) Center for Earth Resources Observation and Science (EROS) has been mapping the vegetation condition of the United States and Alaska using satellite information from the AVHRR sensor. The vegetation condition composites, more commonly called greenness maps, are produced every week using the latest information on the growth and condition of the vegetation. One of the most important aspects of USGS greenness mapping is the historical archive of information dating back to 1989. This historical stretch of information has allowed the USGS to determine a 'normal' vegetation condition. As a result, it is possible to compare the current week's vegetation condition with normal vegetation conditions. An above normal condition could indicate wetter or warmer than normal conditions, while a below normal condition could indicate colder or dryer than normal conditions. The interpretation of departure from normal will depend on the season and geography of a region.

  12. Advanced, High Power, Next Scale, Wave Energy Conversion Device

    Energy Technology Data Exchange (ETDEWEB)

    Mekhiche, Mike [Principal Investigator; Dufera, Hiz [Project Manager; Montagna, Deb [Business Point of Contact

    2012-10-29

    The project conducted under DOE contract DE‐EE0002649 is defined as the Advanced, High Power, Next Scale, Wave Energy Converter. The overall project is split into a seven‐stage, gated development program. The work conducted under the DOE contract is OPT Stage Gate III work and a portion of Stage Gate IV work of the seven stage product development process. The project effort includes Full Concept Design & Prototype Assembly Testing building on our existing PowerBuoy technology to deliver a device with much increased power delivery. Scaling‐up from 150kW to 500kW power generating capacity required changes in the PowerBuoy design that addressed cost reduction and mass manufacturing by implementing a Design for Manufacturing (DFM) approach. The design changes also focused on reducing PowerBuoy Installation, Operation and Maintenance (IO&M) costs which are essential to reducing the overall cost of energy. In this design, changes to the core PowerBuoy technology were implemented to increase capability and reduce both CAPEX and OPEX costs. OPT conceptually envisaged moving from a floating structure to a seabed structure. The design change from a floating structure to seabed structure would provide the implementation of stroke‐ unlimited Power Take‐Off (PTO) which has a potential to provide significant power delivery improvement and transform the wave energy industry if proven feasible.

  13. A new method for high yield purification of type beta transforming growth factor from human platelets

    NARCIS (Netherlands)

    Eijnden-van Raaij, A.J.M. van den; Koornneef, I.; Zoelen, E.J.J. van

    1988-01-01

    A new method was developed for the purification of type beta transforming growth factor from human platelets. This method is a three-step procedure including gel filtration, weak cation exchange HPLC and reverse phase HPLC. All steps are carried out at low pH using exclusively volatile acidic buffer

  14. The Effect of Plasma Beta on High-n Ballooning Stability at Low Magnetic Shear

    CERN Document Server

    Connor, J W; Hastie, R J

    2016-01-01

    An explanation of the observed improvement in H-mode pedestal characteristics with increasing core plasma pressure or poloidal beta, as observed in MAST and JET, is sought in terms of the impact of the Shafranov shift, d', on ideal ballooning MHD stability.

  15. Recent advances in quantitative high throughput and high content data analysis.

    Science.gov (United States)

    Moutsatsos, Ioannis K; Parker, Christian N

    2016-01-01

    High throughput screening has become a basic technique with which to explore biological systems. Advances in technology, including increased screening capacity, as well as methods that generate multiparametric readouts, are driving the need for improvements in the analysis of data sets derived from such screens. This article covers the recent advances in the analysis of high throughput screening data sets from arrayed samples, as well as the recent advances in the analysis of cell-by-cell data sets derived from image or flow cytometry application. Screening multiple genomic reagents targeting any given gene creates additional challenges and so methods that prioritize individual gene targets have been developed. The article reviews many of the open source data analysis methods that are now available and which are helping to define a consensus on the best practices to use when analyzing screening data. As data sets become larger, and more complex, the need for easily accessible data analysis tools will continue to grow. The presentation of such complex data sets, to facilitate quality control monitoring and interpretation of the results will require the development of novel visualizations. In addition, advanced statistical and machine learning algorithms that can help identify patterns, correlations and the best features in massive data sets will be required. The ease of use for these tools will be important, as they will need to be used iteratively by laboratory scientists to improve the outcomes of complex analyses.

  16. High-pressure propulsion - advanced concepts for cooling

    Science.gov (United States)

    Schoerman, Leonard

    The state-of-the-art liquid propellant cooled combustion chambers utilized in the space shuttle are third-generation designs which have evolved from a continuing demand for higher operating pressure and aircraft-type reusability. History has shown that major advances in cooling occur in approximately ten-year cycles, with each cycle providing a nominal 400% increase in operating pressure and/or a higher degree of reusability. The previous technologies include the first-generation double-wall steel jackets used in the 220 psi V-2 and Aerobee, and the second generation wire-wrapped double tapered tubular assemblies typical of the 800 psi Titan I, II, and III, and 1000 psi F-1 engines. The third-generation designs utilize milled slot, high thermal conductivity liners and electrodeposited nickel closures. The space shuttle main engine operating at 3200 psia is adequate for individual flights; however, the desired goal of 55 service-free missions has yet to be realized. Future single-stage-to-orbit propulsion concepts can benefit from a further increase in operating pressures to 6000 to 10,000 psi combined with engine reuse capabilities in excess of the 55 flight goals of the space shuttle. A fourth-generation approach will be required to attain these more ambitious goals. These new designs will require a combination of cooling processes, including regenerative and transpiration, combined with improved high-temperature materials and new fabrication techniques. The limitations of the third-generation designs, the impact of propellant/coolant selection, and the approaches for the coming fourth-generation cooling technologies are discussed.

  17. High-power ultrasonic processing: Recent developments and prospective advances

    Science.gov (United States)

    Gallego-Juarez, Juan A.

    2010-01-01

    Although the application of ultrasonic energy to produce or to enhance a wide variety of processes have been explored since about the middle of the 20th century, only a reduced number of ultrasonic processes have been established at industrial level. However, during the last ten years the interest in ultrasonic processing has revived particularly in industrial sectors where the ultrasonic technology may represent a clean and efficient tool to improve classical existing processes or an innovation alternative for the development of new processes. Such seems to be the case of relevant sectors such as food industry, environment, pharmaceuticals and chemicals manufacture, machinery, mining, etc where power ultrasound is becoming an emerging technology for process development. The possible major problem in the application of high-intensity ultrasound on industrial processing is the design and development of efficient power ultrasonic systems (generators and reactors) capable of large scale successful operation specifically adapted to each individual process. In the area of ultrasonic processing in fluid media and more specifically in gases, the development of the steppedplate transducers and other power ge with extensive radiating surface has strongly contributed to the implementation at semi-industrial and industrial stage of several commercial applications, in sectors such as food and beverage industry (defoaming, drying, extraction, etc), environment (air cleaning, sludge filtration, etc...), machinery and process for manufacturing (textile washing, paint manufacture, etc). The development of different cavitational reactors for liquid treatment in continuous flow is helping to introduce into industry the wide potential of the area of sonochemistry. Processes such as water and effluent treatment, crystallization, soil remediation, etc have been already implemented at semi-industrial and/or industrial stage. Other single advances in sectors like mining or energy have

  18. High-level production of beta-carotene in Saccharomyces cerevisiae by successive transformation with carotenogenic genes from Xanthophyllomyces dendrorhous.

    Science.gov (United States)

    Verwaal, René; Wang, Jing; Meijnen, Jean-Paul; Visser, Hans; Sandmann, Gerhard; van den Berg, Johan A; van Ooyen, Albert J J

    2007-07-01

    To determine whether Saccharomyces cerevisiae can serve as a host for efficient carotenoid and especially beta-carotene production, carotenogenic genes from the carotenoid-producing yeast Xanthophyllomyces dendrorhous were introduced and overexpressed in S. cerevisiae. Because overexpression of these genes from an episomal expression vector resulted in unstable strains, the genes were integrated into genomic DNA to yield stable, carotenoid-producing S. cerevisiae cells. Furthermore, carotenoid production levels were higher in strains containing integrated carotenogenic genes. Overexpression of crtYB (which encodes a bifunctional phytoene synthase and lycopene cyclase) and crtI (phytoene desaturase) from X. dendrorhous was sufficient to enable carotenoid production. Carotenoid production levels were increased by additional overexpression of a homologous geranylgeranyl diphosphate (GGPP) synthase from S. cerevisiae that is encoded by BTS1. Combined overexpression of crtE (heterologous GGPP synthase) from X. dendrorhous with crtYB and crtI and introduction of an additional copy of a truncated 3-hydroxy-3-methylglutaryl-coenzyme A reductase gene (tHMG1) into carotenoid-producing cells resulted in a successive increase in carotenoid production levels. The strains mentioned produced high levels of intermediates of the carotenogenic pathway and comparable low levels of the preferred end product beta-carotene, as determined by high-performance liquid chromatography. We finally succeeded in constructing an S. cerevisiae strain capable of producing high levels of beta-carotene, up to 5.9 mg/g (dry weight), which was accomplished by the introduction of an additional copy of crtI and tHMG1 into carotenoid-producing yeast cells. This transformant is promising for further development toward the biotechnological production of beta-carotene by S. cerevisiae.

  19. Highly Durable Catalysts for Ignition of Advanced Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Monopropellants are readily ignited or decomposed over a bed of solid catalyst. A serious limitation of existing catalysts in the ignition of advanced...

  20. High Performance Thrusters for Advanced Green Monopropellants Project

    Data.gov (United States)

    National Aeronautics and Space Administration — The development of an advanced green monopropellant propulsion system could have significant benefits to a wide range of NASA space missions, from deep space...

  1. High dose 17 beta-estradiol and the alpha-estrogen agonist PPT trigger apoptosis in human adrenal carcinoma cells but the beta-estrogen agonist DPN does not.

    Science.gov (United States)

    Prieto, L M; Brown, J W; Perez-Stable, C; Fishman, L M

    2008-05-01

    Previous studies have shown that high dose 17beta-estradiol (10 (-5) M) has a G2/M blocking effect in SW-13 human adrenal carcinoma cultures and strongly enhances apoptosis. To examine the differential effects of estrogen alpha and beta-receptors in this system, we incubated SW-13 cells with specific alpha- and beta-estrogen receptor agonists, PPT [4,4',4''-(propyl-[ (1)H]-pyrazole-1,3,5-triyl) trisphenol] and DPN [2,3-bis (4-hydroxyphenyl) propionitrile], respectively (each at 10 (-5) M). Flow cytometry was used to analyze the percentages of cells in various phases of the cell cycle [sub-G1 (apoptosis), G1, S, and G2/M] in each experimental condition. Exposure to 17 beta-estradiol for 48 hours increased apoptosis more than 5-fold (from 3.6+/-0.5 to 20+/-2.2% of cells; pPPT had a similar effect, increasing apoptosis to 22+/-1.7% (pPPT; p<0.01 for both agents relative to control); the beta-agonist again had no effect. Estrogen was also found to block the cell cycle in G2/M, increasing it from 15+/-0.4 to 21+/-1.0% of cells (p<0.01), but neither the alpha- nor beta-estrogen agonists had any effect at this point in the cell cycle, indicating that the influence of estrogen was not likely to be either alpha- or beta-receptor mediated. There was no apparent effect of any of these agents on DNA synthesis, as indicated by unchanged percentages of cells in S phase. These studies suggest that induction of apoptosis by estrogen in SW-13 human adrenal cortical carcinoma cultures is mediated by the alpha-receptor, but the G2/M blocking effect of estrogen is not likely to be related to either alpha or beta mechanisms.

  2. Advanced Inverter Functions to Support High Levels of Distributed Solar: Policy and Regulatory Considerations (Brochure)

    Energy Technology Data Exchange (ETDEWEB)

    2014-11-01

    This paper explains how advanced inverter functions (sometimes called 'smart inverters') contribute to the integration of high levels of solar PV generation onto the electrical grid and covers the contributions of advanced functions to maintaining grid stability. Policy and regulatory considerations associated with the deployment of advanced inverter functions are also introduced.

  3. Advanced waveform decomposition for high-speed videoendoscopy analysis.

    Science.gov (United States)

    Ikuma, Takeshi; Kunduk, Melda; McWhorter, Andrew J

    2013-05-01

    This article presents a novel approach to analyze nonperiodic vocal fold behavior of high-speed videoendoscopy (HSV) data. Although HSV can capture true vibrational motions of the vocal folds, its clinical advantage over the videostroboscopy has not widely been accepted. One of the key advantages of the HSV over the videostroboscopy is its ability to capture vocal folds' nonperiodic behavior, which is more prominent in pathological vocal folds. However, such nonperiodicity in the HSV data has not been fully explored quantitatively beyond simple perturbation analysis. This article presents an advanced waveform modeling and decomposition technique for HSV-based waveforms. Waveforms are modeled to have three components: harmonic signal, deterministic nonharmonic signal, and random nonharmonic signal. This decomposition is motivated by the fact that voice disorders introduce signal content that is nonharmonic but carries deterministic quality such as subharmonic or modulating content. The proposed model is aimed to isolate such disordered behaviors as deterministic nonharmonic signal and quantify them. In addition to the model, the article outlines model parameter estimation procedures and a family of harmonics-to-noise ratio (HNR) parameters. The proposed HNR parameters include harmonics-to-deterministic-noise ratio (HDNR) and harmonics-to-random-noise ratio. A preliminary study demonstrates the effectiveness of the extended model and its HNR parameters. Vocal folds with and without benign lesions (Nwith = 13; Nwithout = 20) were studied with HSV glottal area waveforms. All three HNR parameters significantly distinguished the disordered condition, and the HDNR reported the largest effect size (Cohen's d = 2.04).

  4. Simultaneous high-P, high-T X ray diffraction study of beta-(Mg,Fe)2SiO4 to 26 GPa and 900 K

    Science.gov (United States)

    Fei, Yingwei; Mao, Ho-Kwang; Shu, Jinfu; Parthasarathy, G.; Bassett, W. A.; Ko, Jaidong

    1992-01-01

    Attention is given to the lattice parameters of beta phase (Mg(0.84)Fe(0.16))2SiO4 determined by X-ray diffraction using synchrotron radiation under simultaneous high-pressure and high-temperature conditions. The experiments were conducted up to a pressure of 26 GPa and a temperature of 900 K. High pressures were generated in a Mao-Bell type diamond anvil cell using neon gas as a pressure medium. The sample was heated with an external Ni80Cr20 wire heater. Gold was used as an internal high-pressure calibrant at high temperature. The experimental data indicated the anisotropic behavior of the beta phase at high pressure and temperature, i.e., the c axis is about 35-percent more expansible and about 25-percent more compressible than the a and b axes. A value of 5.1 +/-0.8 was found for the Anderson-Grueneisen parameter. The derived thermodynamic parameters for the beta phase are summarized.

  5. Advanced approaches to high intensity laser-driven ion acceleration

    Energy Technology Data Exchange (ETDEWEB)

    Henig, Andreas

    2010-04-26

    Since the pioneering work that was carried out 10 years ago, the generation of highly energetic ion beams from laser-plasma interactions has been investigated in much detail in the regime of target normal sheath acceleration (TNSA). Creation of ion beams with small longitudinal and transverse emittance and energies extending up to tens of MeV fueled visions of compact, laser-driven ion sources for applications such as ion beam therapy of tumors or fast ignition inertial con finement fusion. However, new pathways are of crucial importance to push the current limits of laser-generated ion beams further towards parameters necessary for those applications. The presented PhD work was intended to develop and explore advanced approaches to high intensity laser-driven ion acceleration that reach beyond TNSA. In this spirit, ion acceleration from two novel target systems was investigated, namely mass-limited microspheres and nm-thin, free-standing diamond-like carbon (DLC) foils. Using such ultrathin foils, a new regime of ion acceleration was found where the laser transfers energy to all electrons located within the focal volume. While for TNSA the accelerating electric field is stationary and ion acceleration is spatially separated from laser absorption into electrons, now a localized longitudinal field enhancement is present that co-propagates with the ions as the accompanying laser pulse pushes the electrons forward. Unprecedented maximum ion energies were obtained, reaching beyond 0.5 GeV for carbon C{sup 6+} and thus exceeding previous TNSA results by about one order of magnitude. When changing the laser polarization to circular, electron heating and expansion were shown to be efficiently suppressed, resulting for the first time in a phase-stable acceleration that is dominated by the laser radiation pressure which led to the observation of a peaked C{sup 6+} spectrum. Compared to quasi-monoenergetic ion beam generation within the TNSA regime, a more than 40 times

  6. Betting against Beta

    DEFF Research Database (Denmark)

    Frazzini, Andrea; Heje Pedersen, Lasse

    2014-01-01

    We present a model with leverage and margin constraints that vary across investors and time. We find evidence consistent with each of the model's five central predictions: (1) Because constrained investors bid up high-beta assets, high beta is associated with low alpha, as we find empirically for......, the return of the BAB factor is low. (4) Increased funding liquidity risk compresses betas toward one. (5) More constrained investors hold riskier assets....... for US equities, 20 international equity markets, Treasury bonds, corporate bonds, and futures. (2) A betting against beta (BAB) factor, which is long leveraged low-beta assets and short high-beta assets, produces significant positive risk-adjusted returns. (3) When funding constraints tighten...

  7. Betting Against Beta

    DEFF Research Database (Denmark)

    Frazzini, Andrea; Heje Pedersen, Lasse

    We present a model with leverage and margin constraints that vary across investors and time. We find evidence consistent with each of the model’s five central predictions: (1) Since constrained investors bid up high-beta assets, high beta is associated with low alpha, as we find empirically for U...... of the BAB factor is low; (4) Increased funding liquidity risk compresses betas toward one; (5) More constrained investors hold riskier assets........S. equities, 20 international equity markets, Treasury bonds, corporate bonds, and futures; (2) A betting-against-beta (BAB) factor, which is long leveraged low beta assets and short high-beta assets, produces significant positive risk-adjusted returns; (3) When funding constraints tighten, the return...

  8. Advance in highly efficient hydrogen production by high temperature steam electrolysis

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    High Temperature Steam Electrolysis (HTSE) through a solid oxide electrolytic cell (SOEC) has been receiving increasing research and development attention worldwide because of its high conversion efficiency (about 45%-59%) and its potential usage for large-scale production of hydrogen. The mechanism, composition, structure, and developing challenges of SOEC are summarized. Current situation, key materials, and core technologies of SOEC (solid oxide electrolytic cell) in HTSE are re- viewed, and the prospect of HTSE future application in advanced energy fields is proposed. In addition, the recent research achievements and study progress of HTSE in Tsinghua University are also intro- duced and presented.

  9. Advance in highly efficient hydrogen production by high temperature steam electrolysis

    Institute of Scientific and Technical Information of China (English)

    YU Bo; ZHANG WenQiang; CHEN Jing; XU JingMing; WANG ShaoRong

    2008-01-01

    High Temperature Steam Electrolysis (HTSE) through a solid oxide electrolytic cell (SOEC) has been receiving increasing research and development attention worldwide because of its high conversion efficiency (about 45%-59%) and its potential usage for large-scale production of hydrogen. The mechanism, composition, structure, and developing challenges of SOEC are summarized. Current situation, key materials, and core technologies of SOEC (solid oxide electrolytic cell) in HTSE are re-viewed, and the prospect of HTSE future application in advanced energy fields is proposed. In addition, the recent research achievements and study progress of HTSE in Tsinghua University are also intro-duced and presented.

  10. Determination of Stabiliser Contents in Advanced Gun Propellants by Reverse Phase High Performance Liquid Chromatography

    Science.gov (United States)

    1994-03-01

    HIGH PERFORMANCE LIQUID CHROMATOGRAPHY N"m A.R. TURNER AND A. WHITE...TO biEPROOU.; AND SELL THIS REPORT Determination of Stabiliser Contents in Advanced Gun Propellants by Reverse Phase High Performance Liquid Chromatography A.R...8217/......... .. Availability Cooes Dist Avaiardlo A-i Determination of Stabiliser Contents in Advanced Gun Propellants by Reverse Phase High Performance Liquid Chromatography

  11. 4{\\pi}{\\beta} (LS)-{\\gamma} (HPGe) Digital Coincidence System Based on Synchronous High-Speed Multichannel Data Acquisition

    CERN Document Server

    Chen, Jifeng; Liang, Juncheng; Liu, Jiacheng

    2015-01-01

    A dedicated 4{\\pi}{\\beta} (LS)-{\\gamma} (HPGe)digital coincidence system has been developed in this work, which includes five acquisition channels. Three analog-to-digital converter (ADC) acquisition channels with an acquisition resolution of 8 bits and acquisition rate of 1GSPS (sample per second) are utilized to collect the signals from three Photo multiplier tubes (PMTs) which are adopted to detect {\\beta} decay, and two acquisition channels with an acquisition resolution of 16 bits and acquisition rate of 50MSPS are utilized to collect the signals from high-purity germanium (HPGe) which are adopted to detect {\\gamma} decay. In order to increase the accuracy of the coincidence system, all the five acquisition channels are synchronous within 500ps. The data collected by the five acquisition channels will be transmitted to the host PC through PCI bus and saved as a file. Off-line software is applied for the 4{\\pi}{\\beta} (LS)-{\\gamma} (HPGe) coincidence and data analysis as needed in practical application. W...

  12. Advanced Cathode Material For High Energy Density Lithium-Batteries Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Advanced cathode materials having high red-ox potential and high specific capacity offer great promise to the development of high energy density lithium-based...

  13. Beta cell dynamics: beta cell replenishment, beta cell compensation and diabetes.

    Science.gov (United States)

    Cerf, Marlon E

    2013-10-01

    Type 2 diabetes, characterized by persistent hyperglycemia, arises mostly from beta cell dysfunction and insulin resistance and remains a highly complex metabolic disease due to various stages in its pathogenesis. Glucose homeostasis is primarily regulated by insulin secretion from the beta cells in response to prevailing glycemia. Beta cell populations are dynamic as they respond to fluctuating insulin demand. Beta cell replenishment and death primarily regulate beta cell populations. Beta cells, pancreatic cells, and extra-pancreatic cells represent the three tiers for replenishing beta cells. In rodents, beta cell self-replenishment appears to be the dominant source for new beta cells supported by pancreatic cells (non-beta islet cells, acinar cells, and duct cells) and extra-pancreatic cells (liver, neural, and stem/progenitor cells). In humans, beta cell neogenesis from non-beta cells appears to be the dominant source of beta cell replenishment as limited beta cell self-replenishment occurs particularly in adulthood. Metabolic states of increased insulin demand trigger increased insulin synthesis and secretion from beta cells. Beta cells, therefore, adapt to support their physiology. Maintaining physiological beta cell populations is a strategy for targeting metabolic states of persistently increased insulin demand as in diabetes.

  14. Tests of Full-Scale Helicopter Rotors at High Advancing Tip Mach Numbers and Advance Ratios

    Science.gov (United States)

    Biggers, James C.; McCloud, John L., III; Stroub, Robert H.

    2015-01-01

    As a continuation of the studies of reference 1, three full-scale helicopter rotors have been tested in the Ames Research Center 40- by SO-foot wind tunnel. All three of them were two-bladed, teetering rotors. One of the rotors incorporated the NACA 0012 airfoil section over the entire length of the blade. This rotor was tested at advance ratios up to 1.05. Both of the other rotors were tapered in thickness and incorporated leading-edge camber over the outer 20 percent of the blade radius. The larger of these rotors was tested at advancing tip Mach numbers up to 1.02. Data were obtained for a wide range of lift and propulsive force, and are presented without discussion.

  15. Advanced Nanomaterials for High-Efficiency Solar Cells

    Energy Technology Data Exchange (ETDEWEB)

    Chen, Junhong [University of Wisconsin-Milwaukee

    2013-11-29

    Energy supply has arguably become one of the most important problems facing humankind. The exponential demand for energy is evidenced by dwindling fossil fuel supplies and record-high oil and gas prices due to global population growth and economic development. This energy shortage has significant implications to the future of our society, in addition to the greenhouse gas emission burden due to consumption of fossil fuels. Solar energy seems to be the most viable choice to meet our clean energy demand given its large scale and clean/renewable nature. However, existing methods to convert sun light into electricity are not efficient enough to become a practical alternative to fossil fuels. This DOE project aims to develop advanced hybrid nanomaterials consisting of semiconductor nanoparticles (quantum dots or QDs) supported on graphene for cost-effective solar cells with improved conversion efficiency for harvesting abundant, renewable, clean solar energy to relieve our global energy challenge. Expected outcomes of the project include new methods for low-cost manufacturing of hybrid nanostructures, systematic understanding of their properties that can be tailored for desired applications, and novel photovoltaic cells. Through this project, we have successfully synthesized a number of novel nanomaterials, including vertically-oriented graphene (VG) sheets, three-dimensional (3D) carbon nanostructures comprising few-layer graphene (FLG) sheets inherently connected with CNTs through sp{sup 2} carbons, crumpled graphene (CG)-nanocrystal hybrids, CdSe nanoparticles (NPs), CdS NPs, nanohybrids of metal nitride decorated on nitrogen-doped graphene (NG), QD-carbon nanotube (CNT) and QD-VG-CNT structures, TiO{sub 2}-CdS NPs, and reduced graphene oxide (RGO)-SnO{sub 2} NPs. We further assembled CdSe NPs onto graphene sheets and investigated physical and electronic interactions between CdSe NPs and the graphene. Finally we have demonstrated various applications of these

  16. ADX: a high field, high power density, Advanced Divertor test eXperiment

    Science.gov (United States)

    Vieira, R.; Labombard, B.; Marmar, E.; Irby, J.; Shiraiwa, S.; Terry, J.; Wallace, G.; Whyte, D. G.; Wolfe, S.; Wukitch, S.; ADX Team

    2014-10-01

    The MIT PSFC and collaborators are proposing an advanced divertor experiment (ADX) - a tokamak specifically designed to address critical gaps in the world fusion research program on the pathway to FNSF/DEMO. This high field (6.5 tesla, 1.5 MA), high power density (P/S ~ 1.5 MW/m2) facility would utilize Alcator magnet technology to test innovative divertor concepts for next-step DT fusion devices (FNSF, DEMO) at reactor-level boundary plasma pressures and parallel heat flux densities while producing high performance core plasma conditions. The experimental platform would also test advanced lower hybrid current drive (LHCD) and ion-cyclotron range of frequency (ICRF) actuators and wave physics at the plasma densities and magnetic field strengths of a DEMO, with the unique ability to deploy launcher structures both on the low-magnetic-field side and the high-field side - a location where energetic plasma-material interactions can be controlled and wave physics is most favorable for efficient current drive, heating and flow drive. This innovative experiment would perform plasma science and technology R&D necessary to inform the conceptual development and accelerate the readiness-for-deployment of FNSF/DEMO - in a timely manner, on a cost-effective research platform. Supported by DE-FC02-99ER54512.

  17. Beta-thalassemia

    Directory of Open Access Journals (Sweden)

    Origa Raffaella

    2010-05-01

    , deletions in the beta globin gene on chromosome 11, leading to reduced (beta+ or absent (beta0 synthesis of the beta chains of hemoglobin (Hb. Transmission is autosomal recessive; however, dominant mutations have also been reported. Diagnosis of thalassemia is based on hematologic and molecular genetic testing. Differential diagnosis is usually straightforward but may include genetic sideroblastic anemias, congenital dyserythropoietic anemias, and other conditions with high levels of HbF (such as juvenile myelomonocytic leukemia and aplastic anemia. Genetic counseling is recommended and prenatal diagnosis may be offered. Treatment of thalassemia major includes regular RBC transfusions, iron chelation and management of secondary complications of iron overload. In some circumstances, spleen removal may be required. Bone marrow transplantation remains the only definitive cure currently available. Individuals with thalassemia intermedia may require splenectomy, folic acid supplementation, treatment of extramedullary erythropoietic masses and leg ulcers, prevention and therapy of thromboembolic events. Prognosis for individuals with beta-thalassemia has improved substantially in the last 20 years following recent medical advances in transfusion, iron chelation and bone marrow transplantation therapy. However, cardiac disease remains the main cause of death in patients with iron overload.

  18. Beta-thalassemia.

    Science.gov (United States)

    Galanello, Renzo; Origa, Raffaella

    2010-05-21

    globin gene on chromosome 11, leading to reduced (beta+) or absent (beta0) synthesis of the beta chains of hemoglobin (Hb). Transmission is autosomal recessive; however, dominant mutations have also been reported. Diagnosis of thalassemia is based on hematologic and molecular genetic testing. Differential diagnosis is usually straightforward but may include genetic sideroblastic anemias, congenital dyserythropoietic anemias, and other conditions with high levels of HbF (such as juvenile myelomonocytic leukemia and aplastic anemia). Genetic counseling is recommended and prenatal diagnosis may be offered. Treatment of thalassemia major includes regular RBC transfusions, iron chelation and management of secondary complications of iron overload. In some circumstances, spleen removal may be required. Bone marrow transplantation remains the only definitive cure currently available. Individuals with thalassemia intermedia may require splenectomy, folic acid supplementation, treatment of extramedullary erythropoietic masses and leg ulcers, prevention and therapy of thromboembolic events. Prognosis for individuals with beta-thalassemia has improved substantially in the last 20 years following recent medical advances in transfusion, iron chelation and bone marrow transplantation therapy. However, cardiac disease remains the main cause of death in patients with iron overload.

  19. Beta-thalassemia

    Science.gov (United States)

    2010-01-01

    globin gene on chromosome 11, leading to reduced (beta+) or absent (beta0) synthesis of the beta chains of hemoglobin (Hb). Transmission is autosomal recessive; however, dominant mutations have also been reported. Diagnosis of thalassemia is based on hematologic and molecular genetic testing. Differential diagnosis is usually straightforward but may include genetic sideroblastic anemias, congenital dyserythropoietic anemias, and other conditions with high levels of HbF (such as juvenile myelomonocytic leukemia and aplastic anemia). Genetic counseling is recommended and prenatal diagnosis may be offered. Treatment of thalassemia major includes regular RBC transfusions, iron chelation and management of secondary complications of iron overload. In some circumstances, spleen removal may be required. Bone marrow transplantation remains the only definitive cure currently available. Individuals with thalassemia intermedia may require splenectomy, folic acid supplementation, treatment of extramedullary erythropoietic masses and leg ulcers, prevention and therapy of thromboembolic events. Prognosis for individuals with beta-thalassemia has improved substantially in the last 20 years following recent medical advances in transfusion, iron chelation and bone marrow transplantation therapy. However, cardiac disease remains the main cause of death in patients with iron overload. PMID:20492708

  20. TGF-beta receptor 2 downregulation in tumour-associated stroma worsens prognosis and high-grade tumours show more tumour-associated macrophages and lower TGF-beta1 expression in colon carcinoma: a retrospective study

    Directory of Open Access Journals (Sweden)

    Papadopoulos Thomas

    2007-08-01

    Full Text Available Abstract Background Histological phenotype and clinical behaviour of malignant tumours are not only dependent on alterations in the epithelial cell compartment, but are affected by their interaction with inflammatory cells and tumour-associated stroma. Studies in animal models have shown influence of tumour-associated macrophages (TAM on histological grade of differentiation in colon carcinoma. Disruption of transforming growth factor beta (TGF-beta signalling in tumour cells is related to more aggressive clinical behaviour. Expression data of components of this pathway in tumour-associated stroma is limited. Methods Tissue micro arrays of 310 colon carcinomas from curatively resected patients in UICC stage II and III were established. In a first step we quantified amount of CD68 positive TAMs and expression of components of TGF-beta signalling (TGF-beta1, TGF-beta receptors type 1 and 2, Smad 3 and 4 in tumour and associated stroma. Further we analyzed correlation to histological and clinical parameters (histological grade of differentiation (low-grade (i.e. grade 1 and 2 vs. high-grade (i.e. grade 3 and 4, lymph node metastasis, distant metastasis, 5 year cancer related survival using Chi-square or Fisher's exact test, when appropriate, to compare frequencies, Kaplan-Meier method to calculate 5-year rates of distant metastases and cancer-related survival and log rank test to compare the rates of distant metastases and survival. To identify independent prognostic factors Cox regression analysis including lymph node status and grading was performed. Results High-grade tumours and those with lymph node metastases showed higher rates of TAMs and lower expression of TGF-beta1. Loss of nuclear Smad4 expression in tumor was associated with presence of lymph node metastasis, but no influence on prognosis could be demonstrated. Decrease of both TGF-beta receptors in tumour-associated stroma was associated with increased lymph node metastasis and

  1. Cytochromes P460 and c'-beta; a new family of high-spin cytochromes c.

    Science.gov (United States)

    Elmore, Bradley O; Bergmann, David J; Klotz, Martin G; Hooper, Alan B

    2007-03-01

    Cytochromes-P460 of Nitrosomonas europaea and Methylococcus capsulatus (Bath), and the cytochrome c' of M. capsulatus, believed to be involved in binding or transformation of N-oxides, are shown to represent an evolutionarily related new family of monoheme, approximately 17kDa, cytochromes c found in the genomes of diverse Proteobacteria. All members of this family have a predicted secondary structure predominantly of beta-sheets in contrast to the predominantly alpha-helical cytochromes c' found in photoheterotrophic and denitrifying Proteobacteria.

  2. Highly Potent, Water Soluble Benzimidazole Antagonist for Activated (alpha)4(beta)1 Integrin

    Energy Technology Data Exchange (ETDEWEB)

    Carpenter, R D; Andrei, M; Lau, E Y; Lightstone, F C; Liu, R; Lam, K S; Kurth, M J

    2007-08-29

    The cell surface receptor {alpha}{sub 4}{beta}{sub 1} integrin, activated constitutively in lymphoma, can be targeted with the bisaryl urea peptidomimetic antagonist 1 (LLP2A). However, concerns on its preliminary pharmacokinetic (PK) profile provided an impetus to change the pharmacophore from a bisaryl urea to a 2-arylaminobenzimidazole moiety resulting in improved solubility while maintaining picomolar potency [5 (KLCA4); IC{sub 50} = 305 pM]. With exceptional solubility, this finding has potential for improving PK to help diagnose and treat lymphomas.

  3. Aboveground test of an advanced Li$_2$MoO$_4$ scintillating bolometer to search for neutrinoless double beta decay of $^{100}$Mo

    CERN Document Server

    Bekker, T B; Danevich, F A; Degoda, V Ya; Giuliani, A; Grigorieva, V D; Ivannikova, N V; Mancuso, M; de Marcillac, P; Moroz, I M; Nones, C; Olivieri, E; Pessina, G; Poda, D V; Shlegel, V N; Tretyak, V I; Velazquez, M

    2014-01-01

    Large lithium molybdate (Li$_2$MoO$_4$) crystal boules were produced by using the low thermal gradient Czochralski growth technique from deeply purified molybdenum. A small sample from one of the boules was preliminary characterized in terms of X-ray-induced and thermally-excited luminescence. A large cylindrical crystalline element (with a size of $\\oslash 40\\times40$ mm) was used to fabricate a scintillating bolometer, which was operated aboveground at $\\sim 15$ mK by using a pulse-tube cryostat housing a high-power dilution refrigerator. The excellent detector performance in terms of energy resolution and $\\alpha$ background suppression along with preliminary positive indications on the radiopurity of this material show the potentiality of Li$_2$MoO$_4$ scintillating bolometers for low-counting experiment to search for neutrinoless double beta decay of $^{100}$Mo.

  4. Thermoluminescence dosimetric properties of a new thin beta detector (LiF:Mg, Cu, P; GR-200F) in comparison with highly sensitive Al{sub 2}O{sub 3}:C beta dosimeters

    Energy Technology Data Exchange (ETDEWEB)

    El-Faramawy, N A [GSF-National Research Centre for Environment and Health, Institute for Radiation Protection, D-85758 Neuherberg (Germany); Goeksu, H Y [GSF-National Research Centre for Environment and Health, Institute for Radiation Protection, D-85758 Neuherberg (Germany); Panzer, W [GSF-National Research Centre for Environment and Health, Institute for Radiation Protection, D-85758 Neuherberg (Germany)

    2004-09-01

    There is an increasing need for efficient beta detectors to fulfil ICRU recommendations for new quantities especially in the field of medical physics and retrospective dosimetry. The thermoluminescence properties of thin LiF:Mg, Cu, P (GR-200F) tapes produced in 1998 by Sange Company, People's Republic of China, are investigated and compared with those of highly sensitive thin Al{sub 2}O{sub 3}:C beta detectors as regards their applicability in the detection of low energy photons and beta particles. The radiation dose response, minimum detectable dose, reproducibility of measurements and effect of residual signal at low dose are assessed for the possible low level beta dosimetry use. The radiation dose response and photon and beta detection efficiencies are tested under practical laboratory conditions. The effects of indoor fluorescent light and residual signal after the first read-out are investigated with a view to optimising handling conditions such as post-irradiation and pre-heating treatments for routine dosimetry. The photon energy responses of the detectors are investigated using 150 keV filtered x-rays and {sup 60}Co {gamma}-rays.

  5. ADX: a high field, high power density, advanced divertor and RF tokamak

    Science.gov (United States)

    LaBombard, B.; Marmar, E.; Irby, J.; Terry, J. L.; Vieira, R.; Wallace, G.; Whyte, D. G.; Wolfe, S.; Wukitch, S.; Baek, S.; Beck, W.; Bonoli, P.; Brunner, D.; Doody, J.; Ellis, R.; Ernst, D.; Fiore, C.; Freidberg, J. P.; Golfinopoulos, T.; Granetz, R.; Greenwald, M.; Hartwig, Z. S.; Hubbard, A.; Hughes, J. W.; Hutchinson, I. H.; Kessel, C.; Kotschenreuther, M.; Leccacorvi, R.; Lin, Y.; Lipschultz, B.; Mahajan, S.; Minervini, J.; Mumgaard, R.; Nygren, R.; Parker, R.; Poli, F.; Porkolab, M.; Reinke, M. L.; Rice, J.; Rognlien, T.; Rowan, W.; Shiraiwa, S.; Terry, D.; Theiler, C.; Titus, P.; Umansky, M.; Valanju, P.; Walk, J.; White, A.; Wilson, J. R.; Wright, G.; Zweben, S. J.

    2015-05-01

    The MIT Plasma Science and Fusion Center and collaborators are proposing a high-performance Advanced Divertor and RF tokamak eXperiment (ADX)—a tokamak specifically designed to address critical gaps in the world fusion research programme on the pathway to next-step devices: fusion nuclear science facility (FNSF), fusion pilot plant (FPP) and/or demonstration power plant (DEMO). This high-field (⩾6.5 T, 1.5 MA), high power density facility (P/S ˜ 1.5 MW m-2) will test innovative divertor ideas, including an ‘X-point target divertor’ concept, at the required performance parameters—reactor-level boundary plasma pressures, magnetic field strengths and parallel heat flux densities entering into the divertor region—while simultaneously producing high-performance core plasma conditions that are prototypical of a reactor: equilibrated and strongly coupled electrons and ions, regimes with low or no torque, and no fuelling from external heating and current drive systems. Equally important, the experimental platform will test innovative concepts for lower hybrid current drive and ion cyclotron range of frequency actuators with the unprecedented ability to deploy launch structures both on the low-magnetic-field side and the high-magnetic-field side—the latter being a location where energetic plasma-material interactions can be controlled and favourable RF wave physics leads to efficient current drive, current profile control, heating and flow drive. This triple combination—advanced divertors, advanced RF actuators, reactor-prototypical core plasma conditions—will enable ADX to explore enhanced core confinement physics, such as made possible by reversed central shear, using only the types of external drive systems that are considered viable for a fusion power plant. Such an integrated demonstration of high-performance core-divertor operation with steady-state sustainment would pave the way towards an attractive pilot plant, as envisioned in the ARC concept

  6. High-resolution crystal structure of an engineered human beta2-adrenergic G protein-coupled receptor

    DEFF Research Database (Denmark)

    Cherezov, Vadim; Rosenbaum, Daniel M; Hanson, Michael A;

    2007-01-01

    Heterotrimeric guanine nucleotide-binding protein (G protein)-coupled receptors constitute the largest family of eukaryotic signal transduction proteins that communicate across the membrane. We report the crystal structure of a human beta2-adrenergic receptor-T4 lysozyme fusion protein bound...... to the partial inverse agonist carazolol at 2.4 angstrom resolution. The structure provides a high-resolution view of a human G protein-coupled receptor bound to a diffusible ligand. Ligand-binding site accessibility is enabled by the second extracellular loop, which is held out of the binding cavity by a pair...

  7. The national spherical torus experiment (NSTX) research programme and progress towards high beta, long pulse operating scenarios

    Science.gov (United States)

    Synakowski, E. J.; Bell, M. G.; Bell, R. E.; Bigelow, T.; Bitter, M.; Blanchard, W.; Boedo, J.; Bourdelle, C.; Bush, C.; Darrow, D. S.; Efthimion, P. C.; Fredrickson, E. D.; Gates, D. A.; Gilmore, M.; Grisham, L. R.; Hosea, J. C.; Johnson, D. W.; Kaita, R.; Kaye, S. M.; Kubota, S.; Kugel, H. W.; LeBlanc, B. P.; Lee, K.; Maingi, R.; Manickam, J.; Maqueda, R.; Mazzucato, E.; Medley, S. S.; Menard, J.; Mueller, D.; Nelson, B. A.; Neumeyer, C.; Ono, M.; Paoletti, F.; Park, H. K.; Paul, S. F.; Peng, Y.-K. M.; Phillips, C. K.; Ramakrishnan, S.; Raman, R.; Roquemore, A. L.; Rosenberg, A.; Ryan, P. M.; Sabbagh, S. A.; Skinner, C. H.; Soukhanovskii, V.; Stevenson, T.; Stutman, D.; Swain, D. W.; Taylor, G.; Von Halle, A.; Wilgen, J.; Williams, M.; Wilson, J. R.; Zweben, S. J.; Akers, R.; Barry, R. E.; Beiersdorfer, P.; Bialek, J. M.; Blagojevic, B.; Bonoli, P. T.; Budny, R.; Carter, M. D.; Chang, C. S.; Chrzanowski, J.; Davis, W.; Deng, B.; Doyle, E. J.; Dudek, L.; Egedal, J.; Ellis, R.; Ferron, J. R.; Finkenthal, M.; Foley, J.; Fredd, E.; Glasser, A.; Gibney, T.; Goldston, R. J.; Harvey, R.; Hatcher, R. E.; Hawryluk, R. J.; Heidbrink, W.; Hill, K. W.; Houlberg, W.; Jarboe, T. R.; Jardin, S. C.; Ji, H.; Kalish, M.; Lawrance, J.; Lao, L. L.; Lee, K. C.; Levinton, F. M.; Luhmann, N. C.; Majeski, R.; Marsala, R.; Mastravito, D.; Mau, T. K.; McCormack, B.; Menon, M. M.; Mitarai, O.; Nagata, M.; Nishino, N.; Okabayashi, M.; Oliaro, G.; Pacella, D.; Parsells, R.; Peebles, T.; Peneflor, B.; Piglowski, D.; Pinsker, R.; Porter, G. D.; Ram, A. K.; Redi, M.; Rensink, M.; Rewoldt, G.; Robinson, J.; Roney, P.; Schaffer, M.; Shaing, K.; Shiraiwa, S.; Sichta, P.; Stotler, D.; Stratton, B. C.; Takase, Y.; Tang, X.; Vero, R.; Wampler, W. R.; Wurden, G. A.; Xu, X. Q.; Yang, J. G.; Zeng, L.; Zhu, W.

    2003-12-01

    A major research goal of the national spherical torus experiment is establishing long-pulse, high beta, high confinement operation and its physics basis. This research has been enabled by facility capabilities developed during 2001 and 2002, including neutral beam (up to 7 MW) and high harmonic fast wave (HHFW) heating (up to 6 MW), toroidal fields up to 6 kG, plasma currents up to 1.5 MA, flexible shape control, and wall preparation techniques. These capabilities have enabled the generation of plasmas with \\beta _T \\equiv \\langle p \\rangle /(B_{T0}^{2}/2\\mu_{0}) of up to 35%. Normalized beta values often exceed the no-wall limit, and studies suggest that passive wall mode stabilization enables this for H mode plasmas with broad pressure profiles. The viability of long, high bootstrap current fraction operations has been established for ELMing H mode plasmas with toroidal beta values in excess of 15% and sustained for several current relaxation times. Improvements in wall conditioning and fuelling are likely contributing to a reduction in H mode power thresholds. Electron thermal conduction is the dominant thermal loss channel in auxiliary heated plasmas examined thus far. HHFW effectively heats electrons, and its acceleration of fast beam ions has been observed. Evidence for HHFW current drive is obtained by comparision of the loop voltage evolution in plasmas with matched density and temperature profiles but varying phases of launched HHFW waves. Studies of emissions from electron Bernstein waves indicate a density scale length dependence of their transmission across the upper hybrid resonance near the plasma edge that is consistent with theoretical predictions. A peak heat flux to the divertor targets of 10 MW m-2 has been measured in the H mode, with large asymmetries being observed in the power deposition between the inner and outer strike points. Non-inductive plasma startup studies have focused on coaxial helicity injection. With this technique

  8. Advanced Boost System Developing for High EGR Applications

    Energy Technology Data Exchange (ETDEWEB)

    Sun, Harold

    2012-09-30

    To support industry efforts of clean and efficient internal combustion engine development for passenger and commercial applications • This program focuses on turbocharger improvement for medium and light duty diesel applications, from complete system optimization percepective to enable commercialization of advanced diesel combustion technologies, such as HCCI/LTC. • Improve combined turbocharger efficiency up to 10% or fuel economy by 3% on FTP cycle at Tier II Bin 5 emission level.

  9. Highly Automated Module Production Incorporating Advanced Light Management

    Energy Technology Data Exchange (ETDEWEB)

    Perelli-Minetti, Michael [SolarWorld Americas Inc., Hillsboro, OR (United States); Roof, Kyle [SolarWorld Americas Inc., Hillsboro, OR (United States)

    2015-08-11

    The objective was to enable a high volume, cost effective solution for increasing the amount of light captured by PV modules through utilization of an advanced Light Re-directing Film and to follow a phased approach to develop and implement this new technology in order to achieve an expected power gain of up to 12 watts per module. Full size PV modules were manufactured using a new Light Redirecting Film (LRF) material applied to two different areas of PV modules in order to increase the amount of light captured by the modules. One configuration involved applying thin strips of LRF film over the tabbing ribbon on the cells in order to redirect the light that is normally absorbed by the tabbing ribbon to the active areas of the cells. A second configuration involved applying thin strips of LRF film over the white spaces between cells within a module in order to capture some of the light that is normally reflected from the white areas back through the front glass of the modules. Significant power increases of 1.4% (3.9 watts) and 1.0% (3.2 watts), respectively, compared to standard PV modules were measured under standard test conditions. The performance of PV modules with LRF applied to the tabbing ribbon was modeled. The results showed that the power increase provided by LRF depended greatly on the angle of incident light with the optimum performance only occurring when the light was within a narrow range of being perpendicular to the solar module. The modeling showed that most of the performance gain would be lost when the angle of incident light was greater than 28 degrees off axis. This effect made the orientation of modules with LRF applied to tabbing ribbons very important as modules mounted in “portrait” mode were predicted to provide little to no power gain from LRF under real world conditions. Based on these results, modules with LRF on tabbing ribbons would have to be mounted in “landscape” mode to realize a performance advantage. In addition

  10. Finite beta effects on low- and high-frequency magnetosonic waves in a two-ion-species plasma

    Energy Technology Data Exchange (ETDEWEB)

    Toida, Mieko; Aota, Yukio [Department of Physics, Nagoya University, Nagoya 464-8602 (Japan)

    2013-08-15

    A magnetosonic wave propagating perpendicular to a magnetic field in a two-ion-species plasma has two branches, high-frequency and low-frequency modes. The finite beta effects on these modes are analyzed theoretically on the basis of the three-fluid model with finite ion and electron pressures. First, it is shown that the Korteweg-de Vries (KdV) equation for the low-frequency mode is valid for amplitudes ε<ε{sub max}, where the upper limit of the amplitude ε{sub max} is given as a function of β (β is the ratio of the kinetic and magnetic energy densities), the density ratio, and the cyclotron frequency ratio of two ion species. Next, the linear dispersion relation and KdV equation for the high-frequency mode are derived, including β as a factor. In addition, the theory for heavy ion acceleration by the high-frequency mode pulse and the pulse damping due to this energy transfer in a finite beta plasma are presented.

  11. Creating an advance-care-planning decision aid for high-risk surgery: a qualitative study.

    Science.gov (United States)

    Schuster, Anne Lr; Aslakson, Rebecca A; Bridges, John Fp

    2014-01-01

    High-risk surgery patients may lose decision-making capacity as a result of surgical complications. Advance care planning prior to surgery may be beneficial, but remains controversial and is hindered by a lack of appropriate decision aids. This study sought to examine stakeholders' views on the appropriateness of using decision aids, in general, to support advance care planning among high-risk surgery populations and the design of such a decision aid. Key informants were recruited through purposive and snowball sampling. Semi-structured interviews were conducted by phone until data collected reached theoretical saturation. Key informants were asked to discuss their thoughts about advance care planning and interventions to support advance care planning, particularly for this population. Researchers took de-identified notes that were analyzed for emerging concordant, discordant, and recurrent themes using interpretative phenomenological analysis. Key informants described the importance of initiating advance care planning preoperatively, despite potential challenges present in surgical settings. In general, decision aids were viewed as an appropriate approach to support advance care planning for this population. A recipe emerged from the data that outlines tools, ingredients, and tips for success that are needed to design an advance care planning decision aid for high-risk surgical settings. Stakeholders supported incorporating advance care planning in high-risk surgical settings and endorsed the appropriateness of using decision aids to do so. Findings will inform the next stages of developing the first advance care planning decision aid for high-risk surgery patients.

  12. A high performance sensorimotor beta rhythm-based brain computer interface associated with human natural motor behavior

    Science.gov (United States)

    Bai, Ou; Lin, Peter; Vorbach, Sherry; Floeter, Mary Kay; Hattori, Noriaki; Hallett, Mark

    2008-03-01

    To explore the reliability of a high performance brain-computer interface (BCI) using non-invasive EEG signals associated with human natural motor behavior does not require extensive training. We propose a new BCI method, where users perform either sustaining or stopping a motor task with time locking to a predefined time window. Nine healthy volunteers, one stroke survivor with right-sided hemiparesis and one patient with amyotrophic lateral sclerosis (ALS) participated in this study. Subjects did not receive BCI training before participating in this study. We investigated tasks of both physical movement and motor imagery. The surface Laplacian derivation was used for enhancing EEG spatial resolution. A model-free threshold setting method was used for the classification of motor intentions. The performance of the proposed BCI was validated by an online sequential binary-cursor-control game for two-dimensional cursor movement. Event-related desynchronization and synchronization were observed when subjects sustained or stopped either motor execution or motor imagery. Feature analysis showed that EEG beta band activity over sensorimotor area provided the largest discrimination. With simple model-free classification of beta band EEG activity from a single electrode (with surface Laplacian derivation), the online classifications of the EEG activity with motor execution/motor imagery were: >90%/~80% for six healthy volunteers, >80%/~80% for the stroke patient and ~90%/~80% for the ALS patient. The EEG activities of the other three healthy volunteers were not classifiable. The sensorimotor beta rhythm of EEG associated with human natural motor behavior can be used for a reliable and high performance BCI for both healthy subjects and patients with neurological disorders. Significance: The proposed new non-invasive BCI method highlights a practical BCI for clinical applications, where the user does not require extensive training.

  13. Advanced Materials for High Temperature, High Performance, Wide Bandgap Power Modules

    Science.gov (United States)

    O'Neal, Chad B.; McGee, Brad; McPherson, Brice; Stabach, Jennifer; Lollar, Richard; Liederbach, Ross; Passmore, Brandon

    2016-01-01

    Advanced packaging materials must be utilized to take full advantage of the benefits of the superior electrical and thermal properties of wide bandgap power devices in the development of next generation power electronics systems. In this manuscript, the use of advanced materials for key packaging processes and components in multi-chip power modules will be discussed. For example, to date, there has been significant development in silver sintering paste as a high temperature die attach material replacement for conventional solder-based attach due to the improved thermal and mechanical characteristics as well as lower processing temperatures. In order to evaluate the bond quality and performance of this material, shear strength, thermal characteristics, and void quality for a number of silver sintering paste materials were analyzed as a die attach alternative to solder. In addition, as high voltage wide bandgap devices shift from engineering samples to commercial components, passivation materials become key in preventing premature breakdown in power modules. High temperature, high dielectric strength potting materials were investigated to be used to encapsulate and passivate components internal to a power module. The breakdown voltage up to 30 kV and corresponding leakage current for these materials as a function of temperature is also presented. Lastly, high temperature plastic housing materials are important for not only discrete devices but also for power modules. As the operational temperature of the device and/or ambient temperature increases, the mechanical strength and dielectric properties are dramatically reduced. Therefore, the electrical characteristics such as breakdown voltage and leakage current as a function of temperature for housing materials are presented.

  14. Advanced packaging technology for high frequency photonic applications

    Energy Technology Data Exchange (ETDEWEB)

    Armendariz, M.G.; Hadley, G.R.; Warren, M.E.

    1996-03-01

    An advanced packaging concept has been developed for optical devices. This concept allows multiple fibers to be coupled to photonic integrated circuits, with no fiber penetration of the package walls. The principles used to accomplish this concept involves a second-order grating to couple light in or out of the photonic circuit, and a binary optic lens which receives this light and focuses it into a single-mode optical fiber. Design, fabrication and electrical/optical measurements of this packaging concept are described.

  15. Towards a Radio-guided Surgery with $\\beta^{-}$ Decays: Uptake of a somatostatin analogue (DOTATOC) in Meningioma and High Grade Glioma

    CERN Document Server

    Collamati, Francesco; Bellini, Fabio; Bocci, Valerio; Cremonesi, Marta; De Lucia, Erika; Ferrari, Mahila; Frallicciardi, Paola M; Grana, Chiara M; Marafini, Michela; Mattei, Ilaria; Morganti, Silvio; Patera, Vincenzo; Piersanti, Luca; Recchia, Luigi; Russomando, Andrea; Sarti, Alessio; Sciubba, Adalberto; Senzacqua, Martina; Camillocci, Elena Solfaroli; Voena, Cecilia; Faccini, Riccardo

    2014-01-01

    A novel radio guided surgery (RGS) technique for cerebral tumors using $\\beta^{-}$ radiation is being developed. Checking the availability of a radio-tracer that can deliver a $\\beta^{-}$ emitter to the tumor is a fundamental step in the deployment of such technique. This paper reports a study of the uptake of 90Y labeled (DOTATOC) in the meningioma and the high grade glioma (HGG) and a feasibility study of the RGS technique in these cases.

  16. V&V of MCNP 6.1.1 Beta Against Intermediate and High-Energy Experimental Data

    Energy Technology Data Exchange (ETDEWEB)

    Mashnik, Stepan G [Los Alamos National Lab. (LANL), Los Alamos, NM (United States)

    2014-09-08

    This report presents a set of validation and verification (V&V) MCNP 6.1.1 beta results calculated in parallel, with MPI, obtained using its event generators at intermediate and high-energies compared against various experimental data. It also contains several examples of results using the models at energies below 150 MeV, down to 10 MeV, where data libraries are normally used. This report can be considered as the forth part of a set of MCNP6 Testing Primers, after its first, LA-UR-11-05129, and second, LA-UR-11-05627, and third, LA-UR-26944, publications, but is devoted to V&V with the latest, 1.1 beta version of MCNP6. The MCNP6 test-problems discussed here are presented in the /VALIDATION_CEM/and/VALIDATION_LAQGSM/subdirectories in the MCNP6/Testing/directory. README files that contain short descriptions of every input file, the experiment, the quantity of interest that the experiment measures and its description in the MCNP6 output files, and the publication reference of that experiment are presented for every test problem. Templates for plotting the corresponding results with xmgrace as well as pdf files with figures representing the final results of our V&V efforts are presented. Several technical “bugs” in MCNP 6.1.1 beta were discovered during our current V&V of MCNP6 while running it in parallel with MPI using its event generators. These “bugs” are to be fixed in the following version of MCNP6. Our results show that MCNP 6.1.1 beta using its CEM03.03, LAQGSM03.03, Bertini, and INCL+ABLA, event generators describes, as a rule, reasonably well different intermediate- and high-energy measured data. This primer isn’t meant to be read from cover to cover. Readers may skip some sections and go directly to any test problem in which they are interested.

  17. Beta blockers and improved progression-free survival in patients with advanced HER2 negative breast cancer: a retrospective analysis of the ROSE/TRIO-012 study.

    Science.gov (United States)

    Spera, G; Fresco, R; Fung, H; Dyck, J R B; Pituskin, E; Paterson, I; Mackey, J R

    2017-08-01

    Recent retrospective studies suggest that beta-adrenergic blocking drugs (BB) are associated with improved outcomes in patients with a range of cancers. Although limited and discordant data suggest that BB may increase overall survival (OS) in localized breast cancer (BC), there is no information on the effects of BB in women with advanced BC. To explore the association between BB use and BC outcomes, we retrospectively reviewed ROSE/TRIO-012, a double-blinded, multinational phase III trial that randomized 1144 patients with HER2-negative advanced BC to first-line docetaxel in combination with ramucirumab or placebo. We compared progression-free survival (PFS), OS, overall response rate, and clinical benefit rate in patients who received BB to those who did not. 153/1144 (13%) patients received BB; 62% prior to enrolment and 38% began after enrolment. Median PFS in BB treated patients was longer than in patients who did not receive them (10.3 versus 8.3 months; HR 0.81; 95% CI 0.66-0.99; P = 0.038). Patients treated with BB only after enrolment had even higher median PFS (15.5 versus 8.3 months, P < 0.001). In the TNBC subset, median PFS was 13.0 months with BB, compared to 5.2 months without BB (HR 0.52; 95% CI 0.34-0.79; P = 0.002). The benefit of BB intake in PFS was independent of treatment-emergent hypertension (P = 0.476) but associated with treatment arm (P = 0.037). The test for interactions between BB and treatment arm was not significant (P = 0.276). No differences were seen in OS, overall response rate, or clinical benefit rate. A validation dataset analysis had consistent but less substantial improved outcomes for women with node positive operable breast cancer receiving BB in the BCIRG-005 trial. In this exploratory analysis, BB intake was associated with significant improvement in PFS, particularly in patients with TNBC and patients not previously exposed to BB. NCT00703326.

  18. Advanced Gunn diode as high power terahertz source for a millimetre wave high power multiplier

    Science.gov (United States)

    Amir, F.; Mitchell, C.; Farrington, N.; Missous, M.

    2009-09-01

    An advanced step-graded Gunn diode is reported, which has been developed through joint modelling-experimental work. The ~ 200 GHz fundamental frequency devices have been realized to test GaAs based Gunn oscillators at sub-millimetre wave for use as a high power (multi mW) Terahertz source in conjunction with a mm-wave multiplier, with novel Schottky diodes. The epitaxial growth of both the Gunn diode and Schottky diode wafers were performed using an industrial scale Molecular Beam Epitaxy (V100+) reactor. The Gunn diodes were then manufactured and packaged by e2v Technologies (UK) Plc. Physical models of the high power Gunn diode sources, presented here, are developed in SILVACO.

  19. Insertional activation of cepA leads to high-level beta-lactamase expression in Bacteroides fragilis clinical isolates.

    Science.gov (United States)

    Rogers, M. B.; Bennett, T. K.; Payne, C. M.; Smith, C. J.

    1994-01-01

    Bacteroides fragilis is an important opportunistic pathogen of humans and is resistant to many drugs commonly used to treat anaerobic infections, including beta-lactams. A strain set comprised of B. fragilis isolates producing either low or high levels of the endogenous cephalosporinase activity, CepA, has been described previously (M. B. Rogers, A. C. Parker, and C. J. Smith, Antimicrob. Agents Chemother. 37:2391-2400, 1993). Clones containing cepA genes from each of seven representative strains were isolated, and the DNA sequences were determined. Nucleotide sequence comparisons revealed that there were few differences between the cepA coding sequences of the low- and high-activity strains. The cepA coding sequences were cloned into an expression vector, pFD340, and analyzed in a B. fragilis 638 cepA mutant. The results of beta-lactamase assays and ampicillin MICs showed that there was no significant difference in the enzymatic activity of structural genes from the high- or low-activity strains. Comparison of sequences upstream of the cepA coding region revealed that 50 bp prior to the translation start codon, the sequence for high-activity strains change dramatically. This region of the high-activity strains shared extensive homology with IS21, suggesting that an insertion was responsible for the increased expression of cepA in these isolates. Northern (RNA) blot analysis of total RNA by using cepA-specific DNA probes supported the idea that differential cepA expression in low- and high-activity strains was controlled at the level of transcription. However, the insertion did not alter the cepA transcription start site, which occurred 27 bp upstream of the ATG translation start codon in both expression classes. Possible mechanisms of cepA activation are discussed. Images PMID:7517394

  20. Reduced CGP12177 binding to cardiac {beta}-adrenoceptors in hyperglycemic high-fat-diet-fed, streptozotocin-induced diabetic rats

    Energy Technology Data Exchange (ETDEWEB)

    Thackeray, James T.; Parsa-Nezhad, Maryam; Kenk, Miran; Thorn, Stephanie L. [Molecular Function and Imaging Program, National Cardiac PET Centre, Division of Cardiology, University of Ottawa Heart Institute, Ottawa, Ontario, K1Y4W7 (Canada); Department of Cellular and Molecular Medicine, Faculty of Medicine, University of Ottawa, Roger Guindon Hall, Ottawa, Ontario, K1H8M5 (Canada); Kolajova, Maria [Molecular Function and Imaging Program, National Cardiac PET Centre, Division of Cardiology, University of Ottawa Heart Institute, Ottawa, Ontario, K1Y4W7 (Canada); Beanlands, Rob S.B. [Molecular Function and Imaging Program, National Cardiac PET Centre, Division of Cardiology, University of Ottawa Heart Institute, Ottawa, Ontario, K1Y4W7 (Canada); Department of Cellular and Molecular Medicine, Faculty of Medicine, University of Ottawa, Roger Guindon Hall, Ottawa, Ontario, K1H8M5 (Canada); DaSilva, Jean N., E-mail: jdasilva@ottawaheart.ca [Molecular Function and Imaging Program, National Cardiac PET Centre, Division of Cardiology, University of Ottawa Heart Institute, Ottawa, Ontario, K1Y4W7 (Canada); Department of Cellular and Molecular Medicine, Faculty of Medicine, University of Ottawa, Roger Guindon Hall, Ottawa, Ontario, K1H8M5 (Canada)

    2011-10-15

    Introduction: Abnormal sympathetic nervous system and {beta}-adrenoceptor ({beta}-AR) signaling is associated with diabetes. [{sup 3}H]CGP12177 is a nonselective {beta}-AR antagonist that can be labeled with carbon-11 for positron emission tomography. The aim of this study was to examine the suitability of this tracer for evaluation of altered {beta}-AR expression in diabetic rat hearts. Methods: Ex vivo biodistribution with [{sup 3}H]CGP12177 was carried out in normal Sprague-Dawley rats for evaluation of specific binding and response to continuous {beta}-AR stimulation by isoproterenol. In a separate group, high-fat-diet feeding imparted insulin resistance and a single intraperitoneal injection of streptozotocin (STZ) or vehicle evoked hyperglycemia (blood glucose >11 mM). [{sup 3}H]CGP12177 biodistribution was assessed at 2 and 8 weeks post-STZ to measure {beta}-AR binding in heart, 30 min following tracer injection. Western blotting of {beta}-AR subtypes was completed in parallel. Results: Infusion of isoproterenol over 14 days did not affect cardiac binding of [{sup 3}H]CGP12177. Approximately half of rats treated with STZ exhibited sustained hyperglycemia and progressive hypoinsulinemia. Myocardial [{sup 3}H]CGP12177 specific binding was unchanged at 2 weeks post-STZ but significantly reduced by 30%-40% at 8 weeks in hyperglycemic but not euglycemic STZ-treated rats compared with vehicle-treated controls. Western blots supported a significant decrease in {beta}{sub 1}-AR in hyperglycemic rats. Conclusions: Reduced cardiac [{sup 3}H]CGP12177 specific binding in the presence of sustained hyperglycemia corresponds to a decrease in relative {beta}{sub 1}-AR expression. These data indirectly support the use of [{sup 11}C]CGP12177 for assessment of cardiac dysfunction in diabetes.

  1. Recent Advances in the Synthesis of High Explosive Materials

    Science.gov (United States)

    2016-05-09

    resistant to oxidation than lead azide when subjected to thermal cycling conditions (i.e., high temperature and high humidity). DBX-1 is known to... high thermal stability [29]. Unlike the blue copper (II) nitrotetrazole octahedral complex reported by Huynh [30], DBX-1 is the copper (I) salt that...applications as well. DBX-1 has been shown to be more resistant to oxidation than lead azide when subjected to thermal cycling conditions (i.e., high

  2. Second Generation Advanced Reburning for High Efficiency NOx Control

    Energy Technology Data Exchange (ETDEWEB)

    Vladimir M. Zamansky; Pete M. Maly; Vitali V. Lissianski

    2000-12-31

    This project is designed to develop a family of novel NO{sub x} control technologies, called Second Generation Advanced Reburning (SGAR) which has the potential to achieve 90+% NO{sub x} control in coal-fired boilers at a significantly lower cost than SCR. The thirteenth reporting period in Phase II (October 1-December 31, 2000) included SGAR tests in which coal was used as the reburning fuel. All test work was conducted at GE-EER's 1.0 MMBtu/hr Boiler Simulator Facility. Three test series were performed including AR-Lean, AR-Rich, and reburning + SNCR. Tests demonstrated that over 90% NO{sub x} reduction could be achieved with utilization of coal as a reburning fuel in SGAR. The most effective SGAR variant is reburning + SNCR followed by AR-Lean and AR-Rich.

  3. ADVANCED DESIGN SOLUTIONS FOR HIGH-PRECISION WOODWORKING MACHINES

    Directory of Open Access Journals (Sweden)

    Giuseppe Lucisano

    2016-03-01

    Full Text Available With the aim at performing the highest precision during woodworking, a mix of alternative approaches, fruitfully integrated in a common design strategy, is essential. This paper represents an overview of technical solutions, recently developed by authors, in design of machine tools and their final effects on manufacturing. The most advanced solutions in machine design are reported side by side with common practices or little everyday expedients. These design actions are directly or indirectly related to the rational use of materials, sometimes very uncommon, as in the case of magnetorheological fluids chosen to implement an active control in speed and force on the electro-spindle, and permitting to improve the quality of wood machining. Other actions are less unusual, as in the case of the adoption of innovative anti-vibration supports for basement. Tradition or innovation, all these technical solutions contribute to the final result: the highest precision in wood machining.

  4. Advanced Modulation Techniques for High-Performance Computing Optical Interconnects

    DEFF Research Database (Denmark)

    Karinou, Fotini; Borkowski, Robert; Zibar, Darko

    2013-01-01

    We experimentally assess the performance of a 64 × 64 optical switch fabric used for ns-speed optical cell switching in supercomputer optical interconnects. More specifically, we study four alternative modulation formats and detection schemes, namely, 10-Gb/s nonreturn-to-zero differential phase......-shift keying with balanced direct detection, 10-Gb/s polarization division multiplexed (PDM) quadrature phase-shift keying, 40-Gb/s single-polarization 16-ary quadrature amplitude modulation (16QAM), and 80-Gb/s PDM-16QAM, with coherent intradyne detection, in conjunction with an optimized version...... of the optical shared memory supercomputer interconnect system switch fabric. In particular, we investigate the resilience of the aforementioned advanced modulation formats to the nonlinearities of semiconductor optical amplifiers, used as ON/OFF gates in the supercomputer optical switch fabric under study...

  5. Parametric instability in the high power era of Advanced LIGO

    Science.gov (United States)

    Hardwick, Terra; Blair, Carl; Kennedy, Ross; Evans, Matthew; Fritschel, Peter; LIGO Virgo Scientific Collaboration

    2017-01-01

    After the first direct detections of gravitational waves, Advanced LIGO aims to increase its detection rate during the upcoming science runs through a series of detector improvements, including increased optical power. Higher circulating power increases the likelihood for three-mode parametric instabilities (PIs), in which mechanical modes of the mirrors scatter light into higher-order optical modes in the cavity and the resulting optical modes reinforce the mechanical modes via radiation pressure. Currently, LIGO uses two PI mitigation methods: thermal tuning to change the cavity g-factor and effectively decrease the frequency overlap between mechanical and optical modes, and active damping of mechanical modes with electrostatic actuation. While the combined methods provide stability at the current operating power, there is evidence that these will be insufficient for the next planned power increase; future suppression methods including acoustic mode dampers and dynamic g-factor modulation are discussed.

  6. Advanced test accelerator: a high-current induction linac

    Energy Technology Data Exchange (ETDEWEB)

    Cook, E.G.; Birx, D.L.; Reginato, L.L.

    1982-11-01

    The Advanced Test Accelerator (ATA) is a linear induction accelerator being built at Lawrence Livermore National Laboratory. The aim of the ATA, together with its associated physics program is the research and development necessary to resolve whether particle-beam propagation is possible. Since the accelerator is the tool needed to do the basic propagation experiment, many of its design parameters are specified by the physics. The accelerator parameters are: 50 MeV, 10 kA, 70 ns pulse width (FWHM), and a 1 kHz rep-rate during a ten-pulse burst. In addition, beam quality and pulse-to-pulse repeatability must be excellent. The unique features of the accelerator are the 10 kA beam and the 1 kHz burst frequency.

  7. Optimization of a high-throughput whole blood expression profiling methodology and its application to assess the pharmacodynamics of interferon (IFN beta-1a or polyethylene glycol-conjugated IFN beta-1a in healthy clinical trial subjects

    Directory of Open Access Journals (Sweden)

    Allaire Normand E

    2013-01-01

    Full Text Available Abstract Background Clinical trials offer a unique opportunity to study human disease and response to therapy in a highly controlled setting. The application of high-throughput expression profiling to peripheral blood from clinical trial subjects could facilitate the identification of transcripts that function as prognostic or diagnostic markers of disease or treatment. The paramount issue for these methods is the ability to produce robust, reproducible, and timely mRNA expression profiles from peripheral blood. Single-stranded complementary DNA (sscDNA targets derived from whole blood exhibit improved detection of transcripts and reduced variance as compared to their complementary RNA counterparts and therefore provide a better option for interrogation of peripheral blood on oligonucleotide arrays. High-throughput microarray technologies such as the high-throughput plate array platform offer several advantages compared with slide- or cartridge-based arrays; however, manufacturer’s protocols do not support the use of sscDNA targets. Results We have developed a highly reproducible, high-through put, whole blood expression profiling methodology based on sscDNA and used it to analyze human brain reference RNA and universal human reference RNA samples to identify experimental conditions that most highly correlated with a gold standard quantitative polymerase chain reaction reference dataset. We then utilized the optimized method to analyze whole blood samples from healthy clinical trial subjects treated with different versions of interferon (IFN beta-1a. Analysis of whole blood samples before and after treatment with intramuscular [IM] IFN beta-1a or polyethylene glycol-conjugated IFN (PEG-IFN beta-1a under optimized experimental conditions demonstrated that PEG-IFN beta-1a induced a more sustained and prolonged pharmacodynamic response than unmodified IM IFN beta-1a. These results provide validation of the utility of this new methodology and

  8. High efficiency microfluidic beta detector for pharmacokinetic studies in small animals

    Energy Technology Data Exchange (ETDEWEB)

    Convert, Laurence, E-mail: Laurence.Convert@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); Girard-Baril, Frederique, E-mail: Frederique.Girard.Baril@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); Renaudin, Alan, E-mail: Alan.Renaudin@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); Grondin, Etienne, E-mail: E.Grondin@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); Jaouad, Abdelatif, E-mail: Abdelatif.Jaouad@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); Aimez, Vincent, E-mail: Vincent.Aimez@USherbrooke.ca [Nanofabrication and Nanocharacterization Research Center (CRN2), Department of Electrical and Computer Engineering, Faculty of Engineering, Universite de Sherbrooke, 2500 Blvd Universite, Sherbrooke, Quebec, J1K 2R1 (Canada); and others

    2011-10-01

    New radiotracers are continuously being developed to improve diagnostic efficiency using Single Photon Emission Computed Tomography (SPECT) or Positron Emission Tomography (PET). The characterization of their pharmacokinetics requires blood radioactivity monitoring over time during the scan and is very challenging in small animals because of the low volume of blood available. In this work, a prototype microfluidic blood counter made of a microchannel atop a silicon substrate containing PIN photodiodes is proposed to improve beta detection efficiency in a small volume by eliminating unnecessary interfaces between fluid and detector. A flat rectangular-shaped epoxy channel, 36 {mu}mx1.26 mm cross section and 31.5 mm in length, was microfabricated over a die containing an array of 2x2 mm{sup 2} PIN photodiodes, leaving only a few micrometers of epoxy floor layer between the fluid and the photodiode sensitive surface. This geometry leads to a quasi 2D source, optimizing geometrical detection efficiency that was estimated at 41% using solid angle calculation. CV-IV measurements were made at each fabrication step to confirm that the microchannel components had no significant effects on the diodes' electrical characteristics. The chip was wire-bonded to a PCB and connected to charge sensitive preamplifier and amplifier modules for pulse shaping. Energy spectra recorded for different isotopes showed continuous beta distribution for PET isotopes and monoenergetic conversion electron peaks for {sup 99m}Tc. Absolute sensitivity was determined for the most popular PET and SPECT radioisotopes and ranged from 26% to 33% for PET tracers ({sup 18}F, {sup 13}N, {sup 11}C, {sup 68}Ga) and more than 2% for {sup 99m}Tc. Input functions were successfully simulated with {sup 18}F, confirming the setup's suitability for pharmacokinetic modeling of PET and SPECT radiotracers in animal experiments. By using standard materials and procedures, the fabrication process is well suited

  9. Method and system for advancement of a borehole using a high power laser

    Energy Technology Data Exchange (ETDEWEB)

    Moxley, Joel F.; Land, Mark S.; Rinzler, Charles C.; Faircloth, Brian O.; Zediker, Mark S.

    2014-09-09

    There is provided a system, apparatus and methods for the laser drilling of a borehole in the earth. There is further provided with in the systems a means for delivering high power laser energy down a deep borehole, while maintaining the high power to advance such boreholes deep into the earth and at highly efficient advancement rates, a laser bottom hole assembly, and fluid directing techniques and assemblies for removing the displaced material from the borehole.

  10. Pile-up corrections for high-precision superallowed {beta} decay half-life measurements via {gamma}-ray photopeak counting

    Energy Technology Data Exchange (ETDEWEB)

    Grinyer, G.F. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada)], E-mail: ggrinyer@physics.uoguelph.ca; Svensson, C.E.; Andreoiu, C. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Andreyev, A.N. [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Austin, R.A.E. [Department of Astronomy and Physics, St. Mary' s University, Halifax, NS, B3H 3C3 (Canada); Ball, G.C. [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Bandyopadhyay, D. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Chakrawarthy, R.S. [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Finlay, P. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Garrett, P.E. [Department of Physics, University of Guelph, Guelph, Ont, Canada N1G 2W1 (Canada); TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Hackman, G. [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Hyland, B. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Kulp, W.D. [School of Physics, Georgia Institute of Technology, Atlanta, GA 30332 0430 (United States); Leach, K.G. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Leslie, J.R. [Department of Physics, Queen' s University, Kingston, Ont., K7L 3N6 (Canada); Morton, A.C.; Pearson, C.J. [TRIUMF, 4004 Wesbrook Mall, Vancouver, BC, V6T 2A3 (Canada); Phillips, A.A. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada); Sarazin, F. [Department of Physics, Colorado School of Mines, Golden, CO 80401 (United States); Schumaker, M.A. [Department of Physics, University of Guelph, Guelph, Ont, N1G 2W1 (Canada)] (and others)

    2007-09-11

    A general technique that corrects {gamma}-ray gated {beta} decay-curve data for detector pulse pile-up is presented. The method includes corrections for non-zero time-resolution and energy-threshold effects in addition to a special treatment of saturating events due to cosmic rays. This technique is verified through a Monte Carlo simulation and experimental data using radioactive beams of {sup 26}Na implanted at the center of the 8{pi}{gamma}-ray spectrometer at the ISAC facility at TRIUMF in Vancouver, Canada. The {beta}-decay half-life of {sup 26}Na obtained from counting 1809-keV {gamma}-ray photopeaks emitted by the daughter {sup 26}Mg was determined to be T{sub 1/2}=1.07167{+-}0.00055s following a 27{sigma} correction for detector pulse pile-up. This result is in excellent agreement with the result of a previous measurement that employed direct {beta} counting and demonstrates the feasibility of high-precision {beta}-decay half-life measurements through the use of high-purity germanium {gamma}-ray detectors. The technique presented here, while motivated by superallowed-Fermi {beta} decay studies, is general and can be used for all half-life determinations (e.g. {alpha}-, {beta}-, X-ray, fission) in which a {gamma}-ray photopeak is used to select the decays of a particular isotope.

  11. Water mobility in the endosperm of high beta-glucan barley mutants as studied by nuclear magnetic resonance imaging

    DEFF Research Database (Denmark)

    Seefeldt, Helene Fast; van den Berg, Frans; Klöckenberger, Walter

    2007-01-01

    1H NMR imaging (MRI) was used as a noninvasive technique to study water distribution and mobility in hydrated barley (Hordeum vulgare L.) seeds of accessions with varying content of beta glucan (BG), a highly hygroscopic cell wall component. High contents of BG in barley are unfavorable in malting...... were related to content and location of BG. Water mobility was investigated by following the rate and mode of desiccation in hydrated single seeds. In order to determine the different water components, a multispin echo experiment was set up to reveal the T2 transverse relaxation rates of water within...... desiccation. The embryo retained water even after 36 h of drying, whereas the endosperm showed low and heterogeneous mobility of the water after drying. The relaxation time constants indicated that the BG mutants had regions of much higher water mobility around the ventral crease compared to the control...

  12. High Prevalence of Extended-Spectrum Beta Lactamases among Salmonella enterica Typhimurium Isolates from Pediatric Patients with Diarrhea in China

    Science.gov (United States)

    Yu, Fangyou; Chen, Qiang; Yu, Xiaojun; Li, Qiaoqiao; Ding, Baixing; Yang, Lehe; Chen, Cong; Qin, Zhiqiang; Parsons, Chris; Zhang, Xueqing; Huang, Jinwei; Luo, Yun; Wang, Liangxing; Pan, Jingye

    2011-01-01

    We investigated the extended-spectrum beta lactamases among 62 Salmonella enterica Typhimurium isolates recovered from children with diarrhea in a Chinese pediatric hospital. A large proportion of S. enterica Typhimurium isolates were resistant to multiple antimicrobial agents, including ampicillin (90.3%), tetracycline (80.6%), trimethoprim/sulfamethoxazole (74.2%), chloramphenicol (66.1%), cefotaxime (27.4%). Forty-nine (79.0%) of S. enterica Typhimurium isolates were positive for blaTEM-1b and resistant to ampicillin. Thirteen S. enterica Typhimurium isolates (21.0%) were positive for blaCTX-M-1-group and blaCTX-M-9-group, and all isolates harboring blaCTX-M genes were positive for ISEcp1. Two main clones (PFGE type A and D) accounted for nearly 70% of S. enterica Typhimurium isolates, and 7 CTX-M-producing isolates belonged to PFGE type D. Collectively, our data reveal multi-drug resistance and a high prevalence of extended spectrum beta lactamases among S. enterica Typhimurium isolates from children in China. In addition, we report the first identification of blaCTX-M-55 within Salmonella spp. Our data also suggest that clonal spread is responsible for the dissemination of S. enterica Typhimurium isolates. PMID:21390297

  13. Combined inhalation of beta2 -agonists improves swim ergometer sprint performance but not high-intensity swim performance.

    Science.gov (United States)

    Kalsen, A; Hostrup, M; Bangsbo, J; Backer, V

    2014-10-01

    There is a high prevalence of asthma and airway hyperresponsiveness (AHR) in elite athletes, which leads to a major use of beta2 -agonists. In a randomized double-blinded crossover study, we investigated the effects of combined inhalation of beta2 -agonists (salbutamol, formoterol, and salmeterol), in permitted doses within the World Anti-Doping Agency 2013 prohibited list, in elite swimmers with (AHR, n = 13) or without (non-AHR, n = 17) AHR. Maximal voluntary isometric contraction of m. quadriceps (MVC), sprint performance on a swim ergometer and performance in an exhaustive swim test at 110% of VO2max were determined. Venous plasma interleukin-6 (IL-6) and interleukin-8 (IL-8) were measured post-exercise. No improvement was observed in the exhaustive swim test, but swim ergometer sprint time was improved (P swim performance in elite swimmers. However, swim ergometer sprint performance and MVC were increased, which should be considered when making future anti-doping regulations.

  14. High prevalence of extended-spectrum beta lactamases among Salmonella enterica Typhimurium isolates from pediatric patients with diarrhea in China.

    Directory of Open Access Journals (Sweden)

    Fangyou Yu

    Full Text Available We investigated the extended-spectrum beta lactamases among 62 Salmonella enterica Typhimurium isolates recovered from children with diarrhea in a Chinese pediatric hospital. A large proportion of S. enterica Typhimurium isolates were resistant to multiple antimicrobial agents, including ampicillin (90.3%, tetracycline (80.6%, trimethoprim/sulfamethoxazole (74.2%, chloramphenicol (66.1%, cefotaxime (27.4%. Forty-nine (79.0% of S. enterica Typhimurium isolates were positive for bla(TEM-1b and resistant to ampicillin. Thirteen S. enterica Typhimurium isolates (21.0% were positive for bla(CTX-M-1-group and bla(CTX-M-9-group, and all isolates harboring bla(CTX-M genes were positive for ISEcp1. Two main clones (PFGE type A and D accounted for nearly 70% of S. enterica Typhimurium isolates, and 7 CTX-M-producing isolates belonged to PFGE type D. Collectively, our data reveal multi-drug resistance and a high prevalence of extended spectrum beta lactamases among S. enterica Typhimurium isolates from children in China. In addition, we report the first identification of bla(CTX-M-55 within Salmonella spp. Our data also suggest that clonal spread is responsible for the dissemination of S. enterica Typhimurium isolates.

  15. Multielement trace determination in high purity advanced ceramics and high purity metals

    Indian Academy of Sciences (India)

    R Matschat; H-J Heinrich; M Czerwensky; S Kuxenko; H Kipphardt

    2005-07-01

    In the field of advanced ceramics two CRMs were developed in the last few years by the Federal Institute for Materials Research and Testing, one for silicon nitride and one for silicon carbide. Besides their application by industry they are appropriate to be used for the validation of special methods used for trace determination in accordance with high purity materials. This is demonstrated, for example, on ultrapure silicon carbide which was analysed by solid sampling electrothermal atomic absorption spectrometry (SS ET AAS). BAM is also certifying primary pure reference materials used as the National Standards for inorganic analysis in Germany. The crucial point of this project is the certification of the total purity of high purity materials, each representing one element of the periodic table. A variety of different analytical methods was necessary to determine the trace contents of metallic and non-metallic impurities from almost the whole periodic table in the high purity materials. The primary CRMs of copper, iron and molybdenum are used as examples to demonstrate the modus operandi, analytical effects observed by using high resolution ICP mass spectrometry (HR ICP–MS) and the results.

  16. Second Generation Advanced Reburning for High Efficiency NOx Control

    Energy Technology Data Exchange (ETDEWEB)

    Vladimir M. Zamansky; Peter M. Maly; Vitali V. Lissianski; Mark S. Sheldon; David Moyeda; Roy Payne

    2001-06-30

    This project develops a family of novel Second Generation Advanced Reburning (SGAR) NO{sub x} control technologies, which can achieve 95% NO{sub x} control in coal fired boilers at a significantly lower cost than Selective Catalytic Reduction (SCR). The conventional Advanced Reburning (AR) process integrates basic reburning and N-agent injection. The SGAR systems include six AR variants: (1) AR-Lean--injection of the N-agent and promoter along with overfire air; (2) AR-Rich--injection of N-agent and promoter into the reburning zone; (3) Multiple Injection Advanced Reburning (MIAR)--injection of N-agents and promoters both into the reburning zone and with overfire air; (4) AR-Lean + Promoted SNCR--injection of N-agents and promoters with overfire air and into the temperature zone at which Selective Non-Catalytic Reduction (SNCR) is effective; (5) AR-Rich + Promoted SNCR--injection of N-agents and promoters into the reburning zone and into the SNCR zone; and (6) Promoted Reburning + Promoted SNCR--basic or promoted reburning followed by basic or promoted SNCR process. The project was conducted in two phases over a five-year period. The work included a combination of analytical and experimental studies to confirm the process mechanisms, identify optimum process configurations, and develop a design methodology for full-scale applications. Phase I was conducted from October, 1995 to September, 1997 and included both analytical studies and tests in bench and pilot-scale test rigs. Phase I moved AR technology to Maturity Level III-Major Subsystems. Phase II is conducted over a 45 month period (October, 1997-June, 2001). Phase II included evaluation of alternative promoters, development of alternative reburning fuel and N-Agent jet mixing systems, and scale up. The goal of Phase II was to move the technology to Maturity Level I-Subscale Integrated System. Tests in combustion facility ranging in firing rate from 0.1 x 10{sup 6} to 10 x 10{sup 6} Btu/hr demonstrated the

  17. Advanced processing technology for high-nitrogen steels

    Science.gov (United States)

    Dunning, John S.; Simmons, John W.; Rawers, James C.

    1994-03-01

    Both high-and low-pressure processing techniques can be employed to add nitrogen to iron-based alloys at levels in excess of the equilibrium, ambient-pressure solubility limits. High-pressure techniques include high-pressure melting-solidification; powder atomization; and high-pressure, solid-state diffusion. Low-pressure techniques are centrifugal powder atomization and mechanical alloying. This article describes U.S. Bureau of Mines research on a range of processing technologies for nitrogen steels and references thermodynamic and materials characterization studies that have been completed on these materials.

  18. Ion-scale spectral break of solar wind turbulence at high and low beta.

    Science.gov (United States)

    Chen, C H K; Leung, L; Boldyrev, S; Maruca, B A; Bale, S D

    2014-11-28

    The power spectrum of magnetic fluctuations in the solar wind at 1 AU displays a break between two power laws in the range of spacecraft-frame frequencies 0.1 to 1 Hz. These frequencies correspond to spatial scales in the plasma frame near the proton gyroradius ρi and proton inertial length di. At 1 AU it is difficult to determine which of these is associated with the break, since [Formula: see text] and the perpendicular ion plasma beta is typically β⊥i∼1. To address this, several exceptional intervals with β⊥i≪1 and β⊥i≫1 were investigated, during which these scales were well separated. It was found that for β⊥i≪1 the break occurs at di and for β⊥i≫1 at ρi, i.e., the larger of the two scales. Possible explanations for these results are discussed, including Alfvén wave dispersion, damping, and current sheets.

  19. High latitude gas in the Beta Pictoris system. A possible origin related to Falling Evaporating Bodies

    CERN Document Server

    Beust, Hervé

    2015-01-01

    The presence of off-plane Ca II ions in the Beta Pictoris disk, and the non-detection of off-plane Na I atoms, can be explained as a consequence of the evaporation process of Falling Evaporating Bodies (FEBs). In the star-grazing regime, the FEBs are subject to inclination oscillations up to 30 - 40 degrees that causes most metallic species released by sublimation to move off plane The ions are be stopped at about 100 AU from the star. We show that collisions with a neutral medium can stop the ions. The required H I column density is reduced to 10^17 cm^-2, one order of magnitude below present detection limits. We also investigate the possibility that the ions are slowed down magnetically. While the sole action of a magnetic field of the order of 1 microGauss is not effective, the combined effect of magnetic and collisional deceleration processes lead to an additional lowering of the required H I column density.

  20. Research advance in safety analysis methods for high concrete dam

    Institute of Scientific and Technical Information of China (English)

    REN; QingWen; XU; LanYu; WAN; YunHui

    2007-01-01

    High tensile stresses occurred in high concrete dams and in their foundation lead to the growing importance of their safety with the increase of concrete dam height.Without any exiting specification or successful experiences of concrete dams up to 300 m at home and abroad for reference,experts feel obliged to figure out how to perform safety analysis on high concrete dam.This paper involves the main contents and mechanical features of the safety analysis on high concrete dam and shows the current state and progress of the analysis methods.For the insufficiency and problems existing in normative methods,study on modern numerical method such as finite element method must be strengthened to find out the stress control criterion which is in accordance with the methods.Two aspects of the safety analysis of high dam--local damage from material level and integral destruction from structure level--should be considered.For the local damage,we should consider the non-homogeneity of material and strengthen the research of meso-damage mechanics.While for integral destruction of the system of high dam and its foundation,a study on non-strength theory should receive enough concerns.Further,attention should be paid to the research on the failure modes and criterions of high concrete dam failure analysis and safety evaluation,and the effect of uncertainty and classification of safety should be considered too.

  1. Advances in high voltage power switching with GTOs

    Energy Technology Data Exchange (ETDEWEB)

    Podlesak, T.F. (US Army Electronic Technology and Devices Lab., Fort Monmouth, NJ (US)); McMurray, J.A. (Vitronics, Eatontown, NJ (US)); Carter, J.L.

    1990-12-01

    The control of high voltage at high power, particularly opening switches, has been difficult in the past. Using gate turnoff thyristors (GTOs) arranged in series enables large currents to be switched at high voltage. A high voltage opening switch has been successfully demonstrated in our laboratory. This switch uses GTOs in series and successfully operates at voltages higher than the rated voltage of the individual devices. It is believed that this is the first time this has been successfully demonstrated, in that GTOs have been operated in series before, but always in a manner as to not exceed the voltage capability of the individual devices. In short, the devices have not worked together, sharing the voltage, but one device has been operated using several backup devices. Of particular interest is how well the individual devices share the voltage applied to them. Equal voltage sharing between devices is absolutely essential, in order to not exceed the voltage rating of any of the devices in the series chain. This is accomplished at high (microsecond) switching speeds. Thus, the system is useful for high frequency applications as well as high power, making for a flexible circuit system element. This paper reports on this demonstration system that is rated at 5 KV and uses 1 KV devices. A larger 24 KV system is under design and will use 4.5 KV devices. In order to design the 24 KV switch, the safe operating area of the large devices must be known thoroughly.

  2. Effects of beta-glucans ingestion (Saccharomyces cerevisiae) on metabolism of rats receiving high-fat diet.

    Science.gov (United States)

    de Araújo, T V; Andrade, E F; Lobato, R V; Orlando, D R; Gomes, N F; de Sousa, R V; Zangeronimo, M G; Pereira, L J

    2016-03-14

    We investigated the effects of beta-glucans (Saccharomyces cerevisiae) ingestion on metabolic parameters of Wistar rats receiving high-fat diet. The experimental period was divided into two stages: in the first one, the animals were divided into two groups containing 12 animals each. The first group received commercial feed and the second received high-fat diet containing 20% of pork fat during 60 days. At the end of this period, body weight, blood glucose and Lee index were assessed. In the second stage, those 24 animals were redivided into four groups: (C) - control diet; (CB) - control diet and treated with Beta-glucan (BG); (O) - obese animals and (OB) - obese animals treated with BG. Animals from groups CB and OB received 30 mg/kg of BG dissolved in saline solution by gavage. Animals from groups C and O received only saline solution for 28 days. The design used was totally randomized in 2 × 2 factorial scheme. Data were submitted to analysis of variance (anova). Animals from OB group showed inferior levels (p < 0.05) of total cholesterol (13.33%), triacylglycerols (16.77%) and blood glucose (23.97%) when compared to the animals from group O. The use of BG has provided smaller increase in Lee index (p < 0.05), without promoting alteration in feed and water consumption, organs weight, HDL-C, LDL+VLDL-C, carcass composition, villus/crypt ratio, and pancreas, kidney and stomach histology. BG from S. cerevisiae promoted beneficial metabolic effects in rats receiving high-fat diet.

  3. Advanced Capacitors for High-Power Applications Project

    Data.gov (United States)

    National Aeronautics and Space Administration — As the consumer and industrial requirements for compact, high-power-density, electrical power systems grow substantially over the next decade; there will be a...

  4. Advanced Thermomechanical Processing for a High-Mn Austenitic Steel

    Science.gov (United States)

    Kusakin, Pavel; Tsuzaki, Kaneaki; Molodov, Dmitri A.; Kaibyshev, Rustam; Belyakov, Andrey

    2016-12-01

    The microstructures and mechanical properties of a warm-forged and annealed Fe-18Mn-0.6C-1.5Al TWIP steel were studied. The high dislocation density was evolved by warm forging and the ultrafine grains were developed by subsequent annealing. The dislocation strengthening and the grain refinement result in increased yield strength ranging from 500 to 1000 MPa and the product of ultimate tensile strength by total elongation as high as 70,000 MPa pct.

  5. Beta Diversity in a Highly Heterogeneous Area: Disentangling Species and Taxonomic Dissimilarity for Terrestrial Vertebrates.

    Science.gov (United States)

    Calderón-Patrón, Jaime M; Goyenechea, Irene; Ortiz-Pulido, Raúl; Castillo-Cerón, Jesús; Manriquez, Norma; Ramírez-Bautista, Aurelio; Rojas-Martínez, Alberto E; Sánchez-Rojas, Gerardo; Zuria, Iriana; Moreno, Claudia E

    2016-01-01

    Quantifying differences in species composition among communities provides important information related to the distribution, conservation and management of biodiversity, especially when two components are recognized: dissimilarity due to turnover, and dissimilarity due to richness differences. The ecoregions in central Mexico, within the Mexican Transition Zone, have outstanding environmental heterogeneity and harbor huge biological richness, besides differences in the origin of the biota. Therefore, biodiversity studies in this area require the use of complementary measures to achieve appropriate information that may help in the design of conservation strategies. In this work we analyze the dissimilarity of terrestrial vertebrates, and the components of turnover and richness differences, among six ecoregions in the state of Hidalgo, central Mexico. We follow two approaches: one based on species level dissimilarity, and the second on taxonomic dissimilarity. We used databases from the project "Biodiversity in the state of Hidalgo". Our results indicate that species dissimilarity is higher than taxonomic dissimilarity, and that turnover contributes more than richness differences, both for species and taxonomic total dissimilarity. Moreover, total dissimilarity, turnover dissimilarity and the dissimilarity due to richness differences were positively related in the four vertebrate groups. Reptiles had the highest values of dissimilarity, followed by mammals, amphibians and birds. For reptiles, birds, and mammals, species turnover was the most important component, while richness differences had a higher contribution for amphibians. The highest values of dissimilarity occurred between environmentally contrasting ecoregions (i.e., tropical and temperate forests), which suggests that environmental heterogeneity and differences in the origin of biotas are key factors driving beta diversity of terrestrial vertebrates among ecoregions in this complex area.

  6. AVHRR Orbital Segment = NOAA's Advanced Very High Resolution Radiometer Files: 1992 - 2000

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Advanced Very High Resolution Radiometer (AVHRR) data set is comprised of data collected by the AVHRR sensor and held in the archives of the USGS Earth Resources...

  7. AVHRR Orbital Segment = NOAA's Advanced Very High Resolution Radiometer Files: 1992 - 2000

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Advanced Very High Resolution Radiometer (AVHRR) data set is comprised of data collected by the AVHRR sensor and held in the archives of the USGS Earth...

  8. AVHRR Orbital Segment = NOAA's Advanced Very High Resolution Radiometer Files: 1992 - 2000

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — The Advanced Very High Resolution Radiometer (AVHRR) data set is comprised of data collected by the AVHRR sensor and held in the archives of the USGS Earth Resources...

  9. AVHRR Composites = Advanced Very High Resolution Radiometer U.S. Alaska: 1989 - Present

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — Normalized Difference Vegetation Index (NDVI) Composites are produced from multiple Advanced Very High Resolution Radiometer (AVHRR) daily observations that have...

  10. Stability of high-dose insulin in normal saline bags for treatment of calcium channel blocker and beta blocker overdose.

    Science.gov (United States)

    Laskey, Dayne; Vadlapatla, Rajesh; Hart, Katherine

    2016-11-01

    High-dose insulin has become a first-line therapy for treating severe calcium channel blocker and beta blocker toxicity. Insulin infusions used to treat other conditions (e.g., diabetic ketoacidosis) may be used, but this may lead to pulmonary compromise due to fluid volume overload. An obvious solution would be to use a more concentrated insulin infusion; however, data describing the stability of insulin in polyvinyl chloride bags at concentrations >1 unit/mL are not readily available. To determine the stability of insulin at 16 units/mL in 0.9% saline solution. Eight-hundred units of regular insulin (8 mL from a stock vial containing 100 units/mL) were added to 42 mL of 0.9% saline solution in a polyvinyl chloride bag to make a final concentration of 16 units/mL. Two bags were stored at 4 °C (refrigerated) and two at 25 °C (room temperature). Samples were withdrawn and tested for insulin concentration periodically over 14 days. Concentrated regular insulin in a polyvinyl chloride bag remained within 90% of equilibrium concentration at all time points, indicating the 16 units/mL concentration was sufficiently stable both refrigerated and at room temperature for 14 days. Administration of high-dose insulin can cause fluid volume overload when using traditional insulin formulations. The 16 units/mL concentration allows for the treatment of a patient with severe calcium channel blocker or beta blocker toxicity for a reasonable period of time without administering excessive fluid. Insulin at a concentration of 16 units/mL is stable for 14 days, the maximum timeframe currently allowed under US Pharmacopeia rules for compounding of sterile preparations. This stability data will allow institutions to issue beyond-use dating for intravenous fluids containing concentrated insulin and used for treating beta blocker and calcium channel blocker toxicity.

  11. High Brønsted beta nuc values in SNAr displacement. An indicator of the SET pathway?

    Science.gov (United States)

    Terrier, François; Mokhtari, Malika; Goumont, Régis; Hallé, Jean-Claude; Buncel, Erwin

    2003-05-21

    Nucleophilic substitutions of 4-chloro-7-nitrobenzofurazan (NBD-Cl) and 3-methyl-1-(4-nitrobenzofurazanyl)-imidazolium ions (NBD-Im+) with a series of 4-X-substituted anilines have been kinetically investigated in 70-30 (v/v) and 20-80 (v/v) H2O-Me2SO mixtures. The rate-limiting step in these reactions is nucleophilic addition with formation of Meisenheimer-type sigma-adducts followed by fast expulsion of the leaving group (Cl- or Im). The reactions are characterized by a notable sensitivity to basicity of the aniline nucleophiles, with Hammett rho values of -2.68 and -3.82 in 30% and 80% Me2SO, respectively, for NBD-Cl and even more negative values, -3.43 and -5.27, respectively, for NBD-Im+. This is consistent with significant development of positive charge at the nitrogen atom of the zwitterionic sigma-adduct. Unexpectedly, the Brønsted-type plots reveal abnormally high beta nuc values, ca. 1.0 and 1.3-1.4, respectively. Satisfactory correlations between the rates of the reactions and the oxidation potentials of the respective anilines support a SET mechanism for this process, i.e. initial (fast) electron-transfer from the aniline donor to the nitrobenzofurazan acceptor moiety and subsequent (slow) coupling of the resulting cation and anion radicals within the solvent cage with formation of the sigma-adduct. An alternative possible explanation of the high beta nuc values being related to the strong--I effect exerted by the negatively charged 4-nitrobenzofurazanyl structure, which would induce a greater positive charge at the developing anilinium nitrogen atom in the sigma-adduct-like transition state as compared with the situation in the reference protonation equilibria of anilines, is considered less probable. It is thus proposed that obtention of abnormal beta nuc values may be an indicator of electron-transfer in nucleophilic aromatic substitution and highlights the transition from the polar (SNAr) to the single electron-transfer (SET) mechanism.

  12. Identification of saponins from sugar beet (Beta vulgaris) by low and high-resolution HPLC-MS/MS.

    Science.gov (United States)

    Mikołajczyk-Bator, Katarzyna; Błaszczyk, Alfred; Czyżniejewski, Mariusz; Kachlicki, Piotr

    2016-09-01

    We profiled triterpene saponins from the roots of sugar beet Beta vulgaris L. cultivars Huzar and Boryna using reversed-phase liquid chromatography combined with negative-ion electrospray ionization quadrupole mass spectrometry. We tentatively identified 26 triterpene saponins, including 17 that had not been detected previously in this plant species and 7 saponins that were tentatively identified as new compounds. All observed compounds were glycosides of five different aglycones, of which gypsogenin and norhederagenin are reported for the first time in sugar beet. Thirteen of the saponins detected in sugar beet roots were substituted with dioxolane-type (4 saponins) or acetal-type (9 saponins) dicarboxylic acids. Among the 26 detected saponins, we identified 2 groups of isomers distinguished using high-resolution mass measurements that were detected only in the Huzar cultivar of sugar beet.

  13. High-pressure syntheses, crystal structures, and thermal behaviour of {beta}-RE(BO{sub 2}){sub 3} (RE = Nd, Sm, Gd)

    Energy Technology Data Exchange (ETDEWEB)

    Emme, H.; Heymann, G.; Haberer, A.; Huppertz, H. [Ludwig-Maximilians-Univ. Muenchen (Germany). Dept. Chemie und Biochemie

    2007-06-15

    The compounds {beta}-RE(BO{sub 2}){sub 3} [RE = Nd (neodymium meta-borate), Sm (samarium meta-borate) and Gd (gadolinium meta-borate)] were synthesized under high-pressure and high-temperature conditions in a Walker-type multianvil apparatus at 3.5 GPa (Nd), 7.5 GPa (Sm, Gd) and 1050 C. The crystal structures were determined by single crystal X-ray diffraction data collected at r. t. (Sm, Gd) and at -73 C (Nd), respectively. The structures are isotypic with the already known ambient-pressure phases {beta}-RE(BO{sub 2}){sub 3} (RE = (Tb, Dy)) and the high-pressure phases {beta}-RE(BO{sub 2}){sub 3} (RE = Ho.Lu). (orig.)

  14. Advanced Decontamination Technologies: High Hydrostatic Pressure on Meat Products

    Science.gov (United States)

    Garriga, Margarita; Aymerich, Teresa

    The increasing demand for “natural” foodstuffs, free from chemical additives, and preservatives has triggered novel approaches in food technology developments. In the last decade, practical use of high-pressure processing (HPP) made this emerging non-thermal technology very attractive from a commercial point of view. Despite the fact that the investment is still high, the resulting value-added products, with an extended and safe shelf-life, will fulfil the wishes of consumers who prefer preservative-free minimally processed foods, retaining sensorial characteristics of freshness. Moreover, unlike thermal treatment, pressure treatment is not time/mass dependant, thus reducing the time of processing.

  15. Design of the Advanced High Kinetic Energy Launch System

    Science.gov (United States)

    1982-08-01

    of 41,800 psi. ASTM 574 A516 steel was used for the dome because it is easy to shape and is readily weldable . ASTM A572, Grade 60 is classified as...stirrups were used at 12 or 14 inches, as required. The reinforcement used was ASTM A615 , Grade 60 except for the stirrups for which Grade 40 was used...a high strength, low alloy structural steel and was used for its availability, high strength, and weldability for the rest of the structure. The

  16. Advanced High Dynamic Range Imaging Theory and Practice

    CERN Document Server

    Banterle, Francesco

    2011-01-01

    Imaging techniques seek to simulate the array of light that reaches our eyes to provide the illusion of sensing scenes directly. Both photography and computer graphics deal with the generation of images. Both disciplines have to cope with the high dynamic range in the energy of visible light that human eyes can sense. Traditionally photography and computer graphics took different approaches to the high dynamic range problem. Work over the last ten years though has unified these disciplines and created powerful new tools for the creation of complex, compelling and realistic images. This book pr

  17. Advanced materials for high-temperature thermoelectric energy conversion

    Science.gov (United States)

    Vining, Cronin B.; Vandersande, Jan W.; Wood, Charles

    1992-01-01

    A number of refractory semiconductors are under study at the Jet Propulsion Laboratory for application in thermal to electric energy conversion for space power. The main thrust of the program is to improve or develop materials of high figure of merit and, therefore, high conversion efficiencies over a broad temperature range. Materials currently under investigation are represented by silicon-germanium alloys, lanthanum telluride, and boron carbide. The thermoelectric properties of each of these materials, and prospects for their further improvements, are discussed. Continued progress in thermoelectric materials technology can be expected to yield reliable space power systems with double to triple the efficiency of current state of the art systems.

  18. High beta-palmitate fat controls the intestinal inflammatory response and limits intestinal damage in mucin Muc2 deficient mice.

    Directory of Open Access Journals (Sweden)

    Peng Lu

    Full Text Available BACKGROUND: Palmitic-acid esterified to the sn-1,3 positions of the glycerol backbone (alpha, alpha'-palmitate, the predominant palmitate conformation in regular infant formula fat, is poorly absorbed and might cause abdominal discomfort. In contrast, palmitic-acid esterified to the sn-2 position (beta-palmitate, the main palmitate conformation in human milk fat, is well absorbed. The aim of the present study was to examine the influence of high alpha, alpha'-palmitate fat (HAPF diet and high beta-palmitate fat (HBPF diet on colitis development in Muc2 deficient (Muc2(-/- mice, a well-described animal model for spontaneous enterocolitis due to the lack of a protective mucus layer. METHODS: Muc2(-/- mice received AIN-93G reference diet, HAPF diet or HBPF diet for 5 weeks after weaning. Clinical symptoms, intestinal morphology and inflammation in the distal colon were analyzed. RESULTS: Both HBPF diet and AIN-93G diet limited the extent of intestinal erosions and morphological damage in Muc2(-/- mice compared with HAPF diet. In addition, the immunosuppressive regulatory T (Treg cell response as demonstrated by the up-regulation of Foxp3, Tgfb1 and Ebi3 gene expression levels was enhanced by HBPF diet compared with AIN-93G and HAPF diets. HBPF diet also increased the gene expression of Pparg and enzymatic antioxidants (Sod1, Sod3 and Gpx1, genes all reported to be involved in promoting an immunosuppressive Treg cell response and to protect against colitis. CONCLUSIONS: This study shows for the first time that HBPF diet limits the intestinal mucosal damage and controls the inflammatory response in Muc2(-/- mice by inducing an immunosuppressive Treg cell response.

  19. Advanced energy analysis of high temperature fuel cell systems

    NARCIS (Netherlands)

    De Groot, A.

    2004-01-01

    In this thesis the performance of high temperature fuel cell systems is studied using a new method of exergy analysis. The thesis consists of three parts: ⢠In the first part a new analysis method is developed, which not only considers the total exergy losses in a unit operation, but which distingu

  20. Advances in high rate anaerobic treatment: staging of reactor systems.

    NARCIS (Netherlands)

    Lier, van J.B.; Zee, van der F.P.; Tan, N.C.G.; Rebac, S.; Kleerebezem, R.

    2001-01-01

    Anaerobic wastewater treatment (AnWT) is considered as the most cost-effective solution for organically polluted industrial waste streams. Particularly the development of high-rate systems, in which hydraulic retention times are uncoupled from solids retention times, has led to a world-wide acceptan

  1. Advanced Klystrons for High Efficiency Accelerator Systems - Final Report

    Energy Technology Data Exchange (ETDEWEB)

    Read, Michael; Ives, Robert Lawrence

    2014-03-26

    This program explored tailoring of RF pulses used to drive accelerator cavities. Simulations indicated that properly shaping the pulse risetime to match accelerator cavity characteristics reduced reflected power and increased total efficiency. Tailoring the pulse requires a high power, gridded, klystron to shape the risetime while also controlling the beam current. The Phase I program generated a preliminary design of a gridded electron gun for a klystron producing 5-10 MW of RF power. This required design of a segmented cathode using Controlled Porosity Reservoir cathodes to limit power deposition on the grid. The program was successful in computationally designing a gun producing a high quality electron beam with grid control. Additional analysis of pulse tailoring indicated that technique would only be useful for cavity drive pulses that were less than approximately 2-3 times the risetime. Otherwise, the efficiency gained during the risetime of the pulse became insignificant when considering the efficiency over the entire pulse. Consequently, it was determined that a Phase II program would not provide sufficient return to justify the cost. Never the less, other applications for a high power gridded gun are currently being pursued. This klystron, for example, would facilitate development inverse Comptom x-ray sources by providing a high repetition rate (10 -100 kHz) RF source.

  2. SIEMENS ADVANCED QUANTRA FTICR MASS SPECTROMETER FOR ULTRA HIGH RESOLUTION AT LOW MASS

    Energy Technology Data Exchange (ETDEWEB)

    Spencer, W; Laura Tovo, L

    2008-07-08

    The Siemens Advanced Quantra Fourier Transform Ion Cyclotron Resonance (FTICR) mass spectrometer was evaluated as an alternative instrument to large double focusing mass spectrometers for gas analysis. High resolution mass spectrometers capable of resolving the common mass isomers of the hydrogen isotopes are used to provide data for accurate loading of reservoirs and to monitor separation of tritium, deuterium, and helium. Conventional double focusing magnetic sector instruments have a resolution that is limited to about 5000. The Siemens FTICR instrument achieves resolution beyond 400,000 and could possibly resolve the tritium ion from the helium-3 ion, which differ by the weight of an electron, 0.00549 amu. Working with Y-12 and LANL, SRNL requested Siemens to modify their commercial Quantra system for low mass analysis. To achieve the required performance, Siemens had to increase the available waveform operating frequency from 5 MHz to 40 MHz and completely redesign the control electronics and software. However, they were able to use the previous ion trap, magnet, passive pump, and piezo-electric pulsed inlet valve design. NNSA invested $1M in this project and acquired four systems, two for Y-12 and one each for SRNL and LANL. Siemens claimed a $10M investment in the Quantra systems. The new Siemens Advanced Quantra demonstrated phenomenal resolution in the low mass range. Resolution greater than 400,000 was achieved for mass 2. The new spectrometer had a useful working mass range to 500 Daltons. However, experiments found that a continuous single scan from low mass to high was not possible. Two useful working ranges were established covering masses 1 to 6 and masses 12 to 500 for our studies. A compromise performance condition enabled masses 1 to 45 to be surveyed. The instrument was found to have a dynamic range of about three orders of magnitude and quantitative analysis is expected to be limited to around 5 percent without using complex fitting algorithms

  3. Advanced Electrodes for High Power Li-ion Batteries.

    Science.gov (United States)

    Zaghib, Karim; Mauger, Alain; Groult, Henri; Goodenough, John B; Julien, Christian M

    2013-03-15

    While little success has been obtained over the past few years in attempts to increase the capacity of Li-ion batteries, significant improvement in the power density has been achieved, opening the route to new applications, from hybrid electric vehicles to high-power electronics and regulation of the intermittency problem of electric energy supply on smart grids. This success has been achieved not only by decreasing the size of the active particles of the electrodes to few tens of nanometers, but also by surface modification and the synthesis of new multi-composite particles. It is the aim of this work to review the different approaches that have been successful to obtain Li-ion batteries with improved high-rate performance and to discuss how these results prefigure further improvement in the near future.

  4. Advanced anodes for high-temperature fuel cells

    DEFF Research Database (Denmark)

    Atkinson, A.; Barnett, S.; Gorte, R.J.;

    2004-01-01

    Fuel cells will undoubtedly find widespread use in this new millennium in the conversion of chemical to electrical energy, as they offer very high efficiencies and have unique scalability in electricity-generation applications. The solid-oxide fuel cell (SOFC) is one of the most exciting...... of these energy technologies; it is an all-ceramic device that operates at temperatures in the range 500-1,000degreesC. The SOFC offers certain advantages over lower temperature fuel cells, notably its ability to use carbon monoxide as a fuel rather than being poisoned by it, and the availability of high......-grade exhaust heat for combined heat and power, or combined cycle gas-turbine applications. Although cost is clearly the most important barrier to widespread SOFC implementation, perhaps the most important technical barriers currently being addressed relate to the electrodes, particularly the fuel electrode...

  5. Advanced Electrodes for High Power Li-ion Batteries

    Directory of Open Access Journals (Sweden)

    Christian M. Julien

    2013-03-01

    Full Text Available While little success has been obtained over the past few years in attempts to increase the capacity of Li-ion batteries, significant improvement in the power density has been achieved, opening the route to new applications, from hybrid electric vehicles to high-power electronics and regulation of the intermittency problem of electric energy supply on smart grids. This success has been achieved not only by decreasing the size of the active particles of the electrodes to few tens of nanometers, but also by surface modification and the synthesis of new multi-composite particles. It is the aim of this work to review the different approaches that have been successful to obtain Li-ion batteries with improved high-rate performance and to discuss how these results prefigure further improvement in the near future.

  6. Recent Advances in Food Processing Using High Hydrostatic Pressure Technology.

    Science.gov (United States)

    Wang, Chung-Yi; Huang, Hsiao-Wen; Hsu, Chiao-Ping; Yang, Binghuei Barry

    2016-01-01

    High hydrostatic pressure is an emerging non-thermal technology that can achieve the same standards of food safety as those of heat pasteurization and meet consumer requirements for fresher tasting, minimally processed foods. Applying high-pressure processing can inactivate pathogenic and spoilage microorganisms and enzymes, as well as modify structures with little or no effects on the nutritional and sensory quality of foods. The U.S. Food and Drug Administration (FDA) and the U.S. Department of Agriculture (USDA) have approved the use of high-pressure processing (HPP), which is a reliable technological alternative to conventional heat pasteurization in food-processing procedures. This paper presents the current applications of HPP in processing fruits, vegetables, meats, seafood, dairy, and egg products; such applications include the combination of pressure and biopreservation to generate specific characteristics in certain products. In addition, this paper describes recent findings on the microbiological, chemical, and molecular aspects of HPP technology used in commercial and research applications.

  7. Advances in high frequency ultrasound separation of particulates from biomass.

    Science.gov (United States)

    Juliano, Pablo; Augustin, Mary Ann; Xu, Xin-Qing; Mawson, Raymond; Knoerzer, Kai

    2017-03-01

    In recent years the use of high frequency ultrasound standing waves (megasonics) for droplet or cell separation from biomass has emerged beyond the microfluidics scale into the litre to industrial scale applications. The principle for this separation technology relies on the differential positioning of individual droplets or particles across an ultrasonic standing wave field within the reactor and subsequent biomass material predisposition for separation via rapid droplet agglomeration or coalescence into larger entities. Large scale transducers have been characterised with sonochemiluminescence and hydrophones to enable better reactor designs. High frequency enhanced separation technology has been demonstrated at industrial scale for oil recovery in the palm oil industry and at litre scale to assist olive oil, coconut oil and milk fat separation. Other applications include algal cell dewatering and milk fat globule fractionation. Frequency selection depends on the material properties and structure in the biomass mixture. Higher frequencies (1 and 2MHz) have proven preferable for better separation of materials with smaller sized droplets such as milk fat globules. For palm oil and olive oil, separation has been demonstrated within the 400-600kHz region, which has high radical production, without detectable impact on product quality. Crown Copyright © 2016. Published by Elsevier B.V. All rights reserved.

  8. Source analysis of beta-synchronisation and cortico-muscular coherence after movement termination based on high resolution electroencephalography.

    Science.gov (United States)

    Muthuraman, Muthuraman; Tamás, Gertrúd; Hellriegel, Helge; Deuschl, Günther; Raethjen, Jan

    2012-01-01

    We hypothesized that post-movement beta synchronization (PMBS) and cortico-muscular coherence (CMC) during movement termination relate to each other and have similar role in sensorimotor integration. We calculated the parameters and estimated the sources of these phenomena.We measured 64-channel EEG simultaneously with surface EMG of the right first dorsal interosseus muscle in 11 healthy volunteers. In Task1, subjects kept a medium-strength contraction continuously; in Task2, superimposed on this movement, they performed repetitive self-paced short contractions. In Task3 short contractions were executed alone. Time-frequency analysis of the EEG and CMC was performed with respect to the offset of brisk movements and averaged in each subject. Sources of PMBS and CMC were also calculated.High beta power in Task1, PMBS in Task2-3, and CMC in Task1-2 could be observed in the same individual frequency bands. While beta synchronization in Task1 and PMBS in Task2-3 appeared bilateral with contralateral predominance, CMC in Task1-2 was strictly a unilateral phenomenon; their main sources did not differ contralateral to the movement in the primary sensorimotor cortex in 7 of 11 subjects in Task1, and in 6 of 9 subjects in Task2. In Task2, CMC and PMBS had the same latency but their amplitudes did not correlate with each other. In Task2, weaker PMBS source was found bilaterally within the secondary sensory cortex, while the second source of CMC was detected in the premotor cortex, contralateral to the movement. In Task3, weaker sources of PMBS could be estimated in bilateral supplementary motor cortex and in the thalamus. PMBS and CMC appear simultaneously at the end of a phasic movement possibly suggesting similar antikinetic effects, but they may be separate processes with different active functions. Whereas PMBS seems to reset the supraspinal sensorimotor network, cortico-muscular coherence may represent the recalibration of cortico-motoneuronal and spinal systems.

  9. Source analysis of beta-synchronisation and cortico-muscular coherence after movement termination based on high resolution electroencephalography.

    Directory of Open Access Journals (Sweden)

    Muthuraman Muthuraman

    Full Text Available We hypothesized that post-movement beta synchronization (PMBS and cortico-muscular coherence (CMC during movement termination relate to each other and have similar role in sensorimotor integration. We calculated the parameters and estimated the sources of these phenomena.We measured 64-channel EEG simultaneously with surface EMG of the right first dorsal interosseus muscle in 11 healthy volunteers. In Task1, subjects kept a medium-strength contraction continuously; in Task2, superimposed on this movement, they performed repetitive self-paced short contractions. In Task3 short contractions were executed alone. Time-frequency analysis of the EEG and CMC was performed with respect to the offset of brisk movements and averaged in each subject. Sources of PMBS and CMC were also calculated.High beta power in Task1, PMBS in Task2-3, and CMC in Task1-2 could be observed in the same individual frequency bands. While beta synchronization in Task1 and PMBS in Task2-3 appeared bilateral with contralateral predominance, CMC in Task1-2 was strictly a unilateral phenomenon; their main sources did not differ contralateral to the movement in the primary sensorimotor cortex in 7 of 11 subjects in Task1, and in 6 of 9 subjects in Task2. In Task2, CMC and PMBS had the same latency but their amplitudes did not correlate with each other. In Task2, weaker PMBS source was found bilaterally within the secondary sensory cortex, while the second source of CMC was detected in the premotor cortex, contralateral to the movement. In Task3, weaker sources of PMBS could be estimated in bilateral supplementary motor cortex and in the thalamus. PMBS and CMC appear simultaneously at the end of a phasic movement possibly suggesting similar antikinetic effects, but they may be separate processes with different active functions. Whereas PMBS seems to reset the supraspinal sensorimotor network, cortico-muscular coherence may represent the recalibration of cortico-motoneuronal and

  10. Strategy Guideline: Advanced Construction Documentation Recommendations for High Performance Homes

    Energy Technology Data Exchange (ETDEWEB)

    Lukachko, A.; Gates, C.; Straube, J.

    2011-12-01

    As whole house energy efficiency increases, new houses become less like conventional houses that were built in the past. New materials and new systems require greater coordination and communication between industry stakeholders. The Guideline for Construction Documents for High Performance Housing provides advice to address this need. The reader will be presented with four changes that are recommended to achieve improvements in energy efficiency, durability and health in Building America houses: create coordination drawings, improve specifications, improve detail drawings, and review drawings and prepare a Quality Control Plan.

  11. Advances in high-gradient magnetic fishing for bioprocessing

    OpenAIRE

    Goncalves Gomes, Claudia Sofia; Hobley, Timothy John

    2006-01-01

    High-gradient magnetic fishing” (HGMF) er en metode til processering af fødestrømme med biologiske molekyler. HGMF integrerer brugen af superparamagnetiske adsorbenter med separation og processering med høj-gradient magnetisk separation (HGMS) i et magnetisk filter. Adsorbenterne er uporøse og meget små, hvilket tilsikrer en stor specifik bindingsoverflade. Siden sin begyndelse i 2001, har forskning indenfor HGMF fokuseret på undersøgelse af teknikkens basale principper og udbredelse af dens...

  12. [Ethanol elimination rate (beta60, beta-slope) in different age groups after intake of a moderate or high dose of alcohol].

    Science.gov (United States)

    Barinskaia, T O; Smirnov, A V; Salomatin, E M; Shaev, A I

    2009-01-01

    Ethanol elimination rate (beta60) was measured in different age groups of men and women following its single intake at a dose of 0.8 g/kg body weight (experiment 1) and 2 g/kg (experiment 2). Samples of capillary blood were collected 20, 40, 60, 90, 120, and 300 min (experiment 1) or 360 min after the termination of the intake (experiment 2). The phase of alcohol elimination was deduced from the kinetic curve. Each alcohol dose was consumed during 1-2 minutes or 1-1.5 hours (experiments 1 and 2 respectively). The value of (beta60) in experiment 1 was estimated at 0.17 +/- 0.04 per thousand/hour in young men aged between 18-26 years, 0.22 per thousand/hour in adult men of 32-48 years, and 0.21 per thousand/hour in women aged between 19-41 years. The difference between alcohol elimination rates in young and adult men on the one hand and between young men and women on the other hand was statistically significant (p alcohol excretion rate overestimated by 8 +/- 5% and 31 +/- 6% respectively compared with 10 +/- 7% in women. It is suggested that a single intake of alcohol may lead to an instantaneous rise in the hepatic concentration of ethanol unrelated to the consumed amount that however affects its metabolic rate. It is concluded that the duration of ethanol intake has greater effect on the rate of its elimination from the body than the amount of consumed alcohol, especially in alcohol-tolerant subjects.

  13. High-resolution electron microscopy of advanced materials

    Energy Technology Data Exchange (ETDEWEB)

    Mitchell, T.E.; Kung, H.H.; Sickafus, K.E.; Gray, G.T. III; Field, R.D.; Smith, J.F. [Los Alamos National Lab., NM (United States). Materials Science and Technology Div.

    1997-11-01

    This final report chronicles a three-year, Laboratory Directed Research and Development (LDRD) project at Los Alamos National Laboratory (LANL). The High-Resolution Electron Microscopy Facility has doubled in size and tripled in quality since the beginning of the three-year period. The facility now includes a field-emission scanning electron microscope, a 100 kV field-emission scanning transmission electron microscope (FE-STEM), a 300 kV field-emission high-resolution transmission electron microscope (FE-HRTEM), and a 300 kV analytical transmission electron microscope. A new orientation imaging microscope is being installed. X-ray energy dispersive spectrometers for chemical analysis are available on all four microscopes; parallel electron energy loss spectrometers are operational on the FE-STEM and FE-HRTEM. These systems enable evaluation of local atomic bonding, as well as chemical composition in nanometer-scale regions. The FE-HRTEM has a point-to-point resolution of 1.6 {angstrom}, but the resolution can be pushed to its information limit of 1 {angstrom} by computer reconstruction of a focal series of images. HRTEM has been used to image the atomic structure of defects such as dislocations, grain boundaries, and interfaces in a variety of materials from superconductors and ferroelectrics to structural ceramics and intermetallics.

  14. Advanced Polymer Electrolytes for High-energy-density Power Sources

    Institute of Scientific and Technical Information of China (English)

    D. Golodnitsky; E. Livshits; R. Kovarsky; E. Peled

    2005-01-01

    @@ 1Introduction The preparation of highly controlled thin films of lithium ion conducting organic materials is becoming a challenging but rewarding goal in view of obtaining high-performance technological devices like solid-state polymer batteries and capacitors. The classical polymer electrolyte consists of organic macromolecules (usually polyether polymer) that are doped with inorganic (typically lithium) salts. Poly(ethylene oxide) (PEO) is the most commonly employed polymer in PEs because of the peculiar array in the (-CH2-CH2-O-)n chain providing the ability to solvate low-lattice-energy lithium salts. For three decades the major research attention was focused on amorphous polymer electrolytes in the belief that ionic conductivity occurs in a manner somewhat analogous to gas diffusion through polymer membranes. Segmental motion of the polymer chains continuously creates free volume, into which the ions migrate, and this process allows ions to progress across the electrolyte. Such a view was established by a number of experiments, and denied the possibility of ionic conductivity in crystalline polymer phases. This concept has been recently overturned by our group, demonstrating that conductivity comes about as a result of permanent conducting pathways for the movement of ions.

  15. Advanced Liquid-Cooling Garment Using Highly Thermally Conductive Sheets

    Science.gov (United States)

    Ruemmele, Warren P.; Bue, Grant C.; Orndoff, Evelyne; Tang, Henry

    2010-01-01

    This design of the liquid-cooling garment for NASA spacesuits allows the suit to remove metabolic heat from the human body more effectively, thereby increasing comfort and performance while reducing system mass. The garment is also more flexible, with fewer restrictions on body motion, and more effectively transfers thermal energy from the crewmember s body to the external cooling unit. This improves the garment s performance in terms of the maximum environment temperature in which it can keep a crewmember comfortable. The garment uses flexible, highly thermally conductive sheet material (such as graphite), coupled with cooling water lines of improved thermal conductivity to transfer the thermal energy from the body to the liquid cooling lines more effectively. The conductive sheets can be layered differently, depending upon the heat loads, in order to provide flexibility, exceptional in-plane heat transfer, and good through-plane heat transfer. A metal foil, most likely aluminum, can be put between the graphite sheets and the external heat source/sink in order to both maximize through-plane heat transfer at the contact points, and to serve as a protection to the highly conductive sheets. Use of a wicking layer draws excess sweat away from the crewmember s skin and the use of an outer elastic fabric ensures good thermal contact of the highly conductive underlayers with the skin. This allows the current state of the art to be improved by having cooling lines that can be more widely spaced to improve suit flexibility and to reduce weight. Also, cooling liquid does not have to be as cold to achieve the same level of cooling. Specific areas on the human body can easily be targeted for greater or lesser cooling to match human physiology, a warmer external environment can be tolerated, and spatial uniformity of the cooling garment can be improved to reduce vasoconstriction limits. Elements of this innovation can be applied to other embodiments to provide effective heat

  16. Teaching Advanced Data Analysis Tools to High School Astronomy Students

    Science.gov (United States)

    Black, David V.; Herring, Julie; Hintz, Eric G.

    2015-01-01

    A major barrier to becoming an astronomer is learning how to analyze astronomical data, such as using photometry to compare the brightness of stars. Most fledgling astronomers learn observation, data reduction, and analysis skills through an upper division college class. If the same skills could be taught in an introductory high school astronomy class, then more students would have an opportunity to do authentic science earlier, with implications for how many choose to become astronomers. Several software tools have been developed that can analyze astronomical data ranging from fairly straightforward (AstroImageJ and DS9) to very complex (IRAF and DAOphot). During the summer of 2014, a study was undertaken at Brigham Young University through a Research Experience for Teachers (RET) program to evaluate the effectiveness and ease-of-use of these four software packages. Standard tasks tested included creating a false-color IR image using WISE data in DS9, Adobe Photoshop, and The Gimp; a multi-aperture analyses of variable stars over time using AstroImageJ; creating Spectral Energy Distributions (SEDs) of stars using photometry at multiple wavelengths in AstroImageJ and DS9; and color-magnitude and hydrogen alpha index diagrams for open star clusters using IRAF and DAOphot. Tutorials were then written and combined with screen captures to teach high school astronomy students at Walden School of Liberal Arts in Provo, UT how to perform these same tasks. They analyzed image data using the four software packages, imported it into Microsoft Excel, and created charts using images from BYU's 36-inch telescope at their West Mountain Observatory. The students' attempts to complete these tasks were observed, mentoring was provided, and the students then reported on their experience through a self-reflection essay and concept test. Results indicate that high school astronomy students can successfully complete professional-level astronomy data analyses when given detailed

  17. Reductions in laminin beta2 mRNA translation are responsible for impaired IGFBP-5-mediated mesangial cell migration in the presence of high glucose.

    Science.gov (United States)

    Schaeffer, Valerie; Hansen, Kim M; Morris, David R; Abrass, Christine K

    2010-02-01

    Insulin-like growth factor binding protein-5 (IGFBP-5) mediates mesangial cell migration through activation of cdc42, and laminin421 binding to alpha(6)beta(1)-integrin (Berfield AK, Hansen KM, Abrass CK. Am J Physiol Cell Physiol 291: C589-C599, 2006). Because glomerular expression of laminin beta(2) is reduced in diabetic rats (Abrass CK, Spicer D, Berfield AK, St. John PL, Abrahamson DR. Am J Pathol 151: 1131-1140, 1997), we directly examined the effect of hyperglycemia on mesangial cell migration and laminin beta2 expression. Migration mediated by IGFBP-5 is impaired in the presence of 25 mM glucose. This reduction in migration was found to result from a loss in mesangial cell synthesis of laminin421, and IGFBP-5-induced migration could be restored by replacing laminin421. Additional studies showed that there was selective reduction in mRNA translation of laminin beta2 in the presence of high glucose. Preserved synthesis of laminin beta1 indicates that not all proteins are reduced by high glucose and confirms prior data showing that laminin411 cannot substitute for laminin421 in IGFBP-5-mediated migration. Given the importance of mesangial migration in the reparative response to diabetes-associated mesangiolysis, these findings provide new insights into abnormalities associated with diabetic nephropathy and the potential importance of differential control of protein translation in determination of alterations of protein expression.

  18. Advanced targeted monitoring of high temperature components in power plants

    Energy Technology Data Exchange (ETDEWEB)

    Roos, E.; Maile, K.; Jovanovic, A. [MPA Stuttgart (Germany)

    1998-12-31

    The article presents the idea of targeted monitoring of high-temperature pressurized components in fossil-fueled power plants, implemented within a modular software system and using, in addition to pressure and temperature data, also displacement and strain measurement data. The concept has been implemented as a part of a more complex company-oriented Internet/Intranet system of MPA Stuttgart (ALIAS). ALIAS enables to combine smoothly the monitoring results with those of the off-line analysis, e. g. sensitivity analyses, comparison with preceding experience (case studies), literature search, search in material databases -(experimental and standard data), nonlinear FE-analysis, etc. The concept and the system have been implemented in real plant conditions several power plants in Germany and Europe: one of these applications and its results are described more in detail in the presentation. (orig.) 9 refs.

  19. Recent advances in high temperature polymers for microelectronic applications

    Energy Technology Data Exchange (ETDEWEB)

    Labadie, J.W.; Hedrick, J.L. (IBM Almaden Research Center, San Jose, CA (USA))

    1989-12-01

    This paper describes research concerned with the synthesis and properties of a variety of new materials based on polyphenylquinoxalines, polyquinoxalones, polybenzoxazoles and polyimide random copolymers containing phenylquinoxaline and benzoxazole moieties. The synthesis of NMP processable phenylquinoxaline and benzoxazole based poly(aryl ethers) was carried out using a novel heterocyclic activated fluoro displacement by bisphenoxides, affording high T(g), melt and solvent processable polymers with tough, ductile mechanical properties. In addition, heterocyclic activated ether synthesis was used to prepare phenylquinoxaline and benzoxazole containing diamines which were used in conventional polyimide syntheses, yielding random copolymers which showed moduli comparable to PMDA/ODA polyimide and elongations ranging from 60 to 120 percent. Polyquinoxalones were synthesized by the step growth polymerization of bis(keto esters) with bis(o-diamines) and represent an interesting new class of linear polyquinoxalines. The thermal and mechanical properties were evaluated for many of these polymers, and were found to be comparable to polyimides. 11 refs.

  20. Advances in Solid State Joining of High Temperature Alloys

    Science.gov (United States)

    Ding, Jeff; Schneider, Judy

    2011-01-01

    Many of the metals used in the oil and gas industry are difficult to fusion weld including Titanium and its alloys. Solid state joining processes are being pursued as an alternative process to produce robust structures more amenable to high pressure applications. Various solid state joining processes include friction stir welding (FSW) and a patented modification termed thermal stir welding (TSW). The configuration of TSWing utilizes an induction coil to preheat the material minimizing the burden on the weld tool extending its life. This provides the ability to precisely select and control the temperature to avoid detrimental changes to the microstructure. The work presented in this presentation investigates the feasibility of joining various titanium alloys using the solid state welding processes of FSW and TSW. Process descriptions and attributes of each weld process will be presented. Weld process set ]up and welding techniques will be discussed leading to the challenges experienced. Mechanical property data will also be presented.

  1. Advanced Gear Alloys for Ultra High Strength Applications

    Science.gov (United States)

    Shen, Tony; Krantz, Timothy; Sebastian, Jason

    2011-01-01

    Single tooth bending fatigue (STBF) test data of UHS Ferrium C61 and C64 alloys are presented in comparison with historical test data of conventional gear steels (9310 and Pyrowear 53) with comparable statistical analysis methods. Pitting and scoring tests of C61 and C64 are works in progress. Boeing statistical analysis of STBF test data for the four gear steels (C61, C64, 9310 and Pyrowear 53) indicates that the UHS grades exhibit increases in fatigue strength in the low cycle fatigue (LCF) regime. In the high cycle fatigue (HCF) regime, the UHS steels exhibit better mean fatigue strength endurance limit behavior (particularly as compared to Pyrowear 53). However, due to considerable scatter in the UHS test data, the anticipated overall benefits of the UHS grades in bending fatigue have not been fully demonstrated. Based on all the test data and on Boeing s analysis, C61 has been selected by Boeing as the gear steel for the final ERDS demonstrator test gearboxes. In terms of potential follow-up work, detailed physics-based, micromechanical analysis and modeling of the fatigue data would allow for a better understanding of the causes of the experimental scatter, and of the transition from high-stress LCF (surface-dominated) to low-stress HCF (subsurface-dominated) fatigue failure. Additional STBF test data and failure analysis work, particularly in the HCF regime and around the endurance limit stress, could allow for better statistical confidence and could reduce the observed effects of experimental test scatter. Finally, the need for further optimization of the residual compressive stress profiles of the UHS steels (resulting from carburization and peening) is noted, particularly for the case of the higher hardness C64 material.

  2. CHRONICLE: International forum on advanced high-power lasers and applications (AHPLA '99)

    Science.gov (United States)

    Afanas'ev, Yurii V.; Zavestovskaya, I. N.; Zvorykin, V. D.; Ionin, Andrei A.; Senatsky, Yu V.; Starodub, Aleksandr N.

    2000-05-01

    A review of reports made on the International Forum on Advanced High-Power Lasers and Applications, which was held at the beginning of November 1999 in Osaka (Japan), is presented. Five conferences were held during the forum on High-Power Laser Ablation, High-Power Lasers in Energy Engineering, High-Power Lasers in Civil Engineering and Architecture, High-Power Lasers in Manufacturing, and Advanced High-Power Lasers. The following trends in the field of high-power lasers and their applications were presented: laser fusion, laser applications in space, laser-triggered lightning, laser ablation of materials by short and ultrashort pulses, application of high-power lasers in manufacturing, application of high-power lasers in mining, laser decommissioning and decontamination of nuclear reactors, high-power solid-state and gas lasers, x-ray and free-electron lasers. One can find complete information on the forum in SPIE, vols. 3885-3889.

  3. High-pressure hetero-Diels-Alder route to (+/-)-6,6,6-trifluoro-beta-C-naphthyl glycosides.

    Science.gov (United States)

    Maingot, Lucie; Leconte, Stéphane; Chataigner, Isabelle; Martel, Arnaud; Dujardin, Gilles

    2009-04-02

    The first de novo synthesis of a beta-C-naphthyl glycoside displaying a convenient functionality for subsequent transformations into complex C-aryl glycosides is reported. The synthesis of this (+/-)-beta-C-1,5-dibenzyloxynaphthyl 6,6,6-trifluoro-3-amino glycoside relies on a hyperbaric HDA reaction involving a new 2-vinylnaphthalenic dienophile.

  4. Advanced Coatings Enabling High Performance Instruments for Astrophysics Missions

    Science.gov (United States)

    Nikzad, Shouleh

    We propose a three-year effort to develop techniques for far-ultraviolet (FUV) and ultraviolet coatings both as reflective optics coatings and as out-of-band-rejection (solar-blind) filters that will have a dramatic effect on the throughput and efficiency of instruments. This is an ideal time to address this problem. On the one hand, exciting new science questions posed in UV and optical realm place exacting demands on instrument capabilities far beyond HST-COS, FUSE, and GALEX with large focal plane arrays and high efficiency requirements. And on the other hand, the development of techniques and process such as atomic layer deposition with its atomically precise capability and nano-engineered materials approach enables us to address the challenging materials issues in the UV where interaction of photons and matter happen in the first few nanometers of the material surface. Aluminum substrates with protective overlayers (typically XFy, where X = Li, Mg, or Ca) have been the workhorse of reflective coatings for ultraviolet and visible instruments; however, they have demonstrated severe limitations. The formation of oxide at the Al-XFy interface and thick protective layers both affect the overall optical performance, leading to diminished reflection at shorter wavelengths. To address these long-standing shortcomings of coatings, we will use our newly developed processes and equipment to produce high-quality single- and multi-layer films of a variety of dielectrics and metals deposited with nano-scale control. JPL s new ALD system affords high uniformity, low oxygen background, good plasma processes, and precise temperature control, which are vital to achieving the large scale, uniform, and ultrathin films that are free of oxygen at interfaces. For example, ALD-grown aluminum can be protected using our newly developed chemistry for ALD magnesium fluoride. Our work will verify that the ALD technique reliably prevents the oxidation of aluminum, and will subsequently be

  5. Degradation of the beta-blocker propranolol by electrochemical advanced oxidation processes based on Fenton's reaction chemistry using a boron-doped diamond anode

    Energy Technology Data Exchange (ETDEWEB)

    Isarain-Chavez, Eloy; Rodriguez, Rosa Maria; Garrido, Jose Antonio; Arias, Conchita; Centellas, Francesc; Cabot, Pere Lluis [Laboratori d' Electroquimica dels Materials i del Medi Ambient, Departament de Quimica Fisica, Facultat de Quimica, Universitat de Barcelona, Marti i Franques 1-11, 08028 Barcelona (Spain); Brillas, Enric, E-mail: brillas@ub.ed [Laboratori d' Electroquimica dels Materials i del Medi Ambient, Departament de Quimica Fisica, Facultat de Quimica, Universitat de Barcelona, Marti i Franques 1-11, 08028 Barcelona (Spain)

    2010-12-15

    The electro-Fenton (EF) and photoelectro-Fenton (PEF) degradation of solutions of the beta-blocker propranolol hydrochloride with 0.5 mmol dm{sup -3} Fe{sup 2+} at pH 3.0 has been studied using a single cell with a boron-doped diamond (BDD) anode and an air diffusion cathode (ADE) for H{sub 2}O{sub 2} electrogeneration and a combined cell containing the above BDD/ADE pair coupled in parallel to a Pt/carbon felt (CF) cell. This naphthalene derivative can be mineralized by both methods with a BDD anode. Almost overall mineralization is attained for the PEF treatments, more rapidly with the combined system due to the generation of higher amounts of hydroxyl radical from Fenton's reaction by the continuous Fe{sup 2+} regeneration at the CF cathode, accelerating the oxidation of organics to Fe(III)-carboxylate complexes that are more quickly photolyzed by UVA light. The homologous EF processes are less potent giving partial mineralization. The effect of current density, pH and Fe{sup 2+} and drug concentrations on the oxidation power of PEF process in combined cell is examined. Propranolol decay follows a pseudo first-order reaction in most cases. Aromatic intermediates such as 1-naphthol and phthalic acid and generated carboxylic acids such as maleic, formic, oxalic and oxamic are detected and quantified by high-performance liquid chromatography. The chloride ions present in the starting solution are slowly oxidized at the BDD anode. In PEF treatments, all initial N of propranolol is completely transformed into inorganic ions, with predominance of NH{sub 4}{sup +} over NO{sub 3}{sup -} ion.

  6. Advances in high-gradient magnetic fishing for bioprocessing

    DEFF Research Database (Denmark)

    Goncalves Gomes, Claudia Sofia

    2006-01-01

    High-gradient magnetic fishing” (HGMF) er en metode til processering af fødestrømme med biologiske molekyler. HGMF integrerer brugen af superparamagnetiske adsorbenter med separation og processering med høj-gradient magnetisk separation (HGMS) i et magnetisk filter. Adsorbenterne er uporøse og...... meget små, hvilket tilsikrer en stor specifik bindingsoverflade. Siden sin begyndelse i 2001, har forskning indenfor HGMF fokuseret på undersøgelse af teknikkens basale principper og udbredelse af dens anvendelighed til direkte produktfangst - med det langsigtede mål at udvikle et egentligt redskab til...... afhandling har været at undersøge, hvorledes HGMF kan anvendes til direkte fangst af højværdi produkter i fødestrømme ved høje koncentrationer, og hvorvidt HGMF kan udbredes til brug ved andre bioprocesseringsopgaver end direkte fangst, samt at besvare fundamentale spørgsmål om, hvorledes magnetiske...

  7. Advances to Dynamic Mechanical Analysis: High Frequencies and Environmental Applications

    Science.gov (United States)

    Foreman, Jonathon

    2002-03-01

    In dynamic mechanical analysis (DMA) the sample is deformed and released sinusoidally providing information about the modulus and damping behaviors with respect to temperature, time, oscillation frequency and amplitude of motion. It offers exceptional sensitivity to glass transitions and secondary relaxations. Recent developments have increased the frequency range up to 1000 Hz, which allow properties measurements under actual end-use conditions. Furthermore high frequencies enhance the ability to determine the kinetics of viscoelastic relaxations. Another recent development allows DMA measurements while samples are immersed in fluids or enveloped in gases. Most significant is the ability to alter the furnace control parameters to account for the thermal properties of the environment used. This configuration allows temperature-controlled measurements (both heating and isothermal profiles) on a wide range of sample shapes and sizes. Environmental DMA is easier to interpret than standard DMA (in air or inert gas) on preconditioned samples because such samples often lose the conditioning solvent or gas during the measurement. easy.com/dma_apps.asp>Examples will show real-time property changes from the interaction of unconditioned materials with conditioning environments and experiments on pre-conditioned materials that are heated while immersed in conditioning environments. -------------------------------------------------------------

  8. A low-cost hierarchical nanostructured beta-titanium alloy with high strength.

    Science.gov (United States)

    Devaraj, Arun; Joshi, Vineet V; Srivastava, Ankit; Manandhar, Sandeep; Moxson, Vladimir; Duz, Volodymyr A; Lavender, Curt

    2016-04-01

    Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio structural materials can reduce the consumption of fossil fuels and in turn CO2 emission. Working towards this goal we achieved high strength in a low cost β-titanium alloy, Ti-1Al-8V-5Fe (Ti185), by hierarchical nanostructure consisting of homogenous distribution of micron-scale and nanoscale α-phase precipitates within the β-phase matrix. The sequence of phase transformation leading to this hierarchical nanostructure is explored using electron microscopy and atom probe tomography. Our results suggest that the high number density of nanoscale α-phase precipitates in the β-phase matrix is due to ω assisted nucleation of α resulting in high tensile strength, greater than any current commercial titanium alloy. Thus hierarchical nanostructured Ti185 serves as an excellent candidate for replacing costlier titanium alloys and other structural alloys for cost-effective lightweighting applications.

  9. High Resolution Crystal Structure of Human [beta]-Glucuronidase Reveals Structural Basis of Lysosome Targeting

    National Research Council Canada - National Science Library

    Hassan, Md; Waheed, Abdul; Grubb, Jeffery; Klei, Herbert; Korolev, Sergey; Sly, William

    2013-01-01

    ...). Here we report a high resolution crystal structure of human GUS at 1.7 Å resolution and present an extensive analysis of the structural features, unifying recent findings in the field of lysosome targeting and glycosyl hydrolases...

  10. Development of an advanced electropolishing setup for multicell high gradient niobium cavities

    Directory of Open Access Journals (Sweden)

    F. Éozénou

    2012-08-01

    Full Text Available Reproducible operation at high performances of superconducting cavities is required for linear accelerators. High beta elliptical cavities are thus of concern and, to achieve required performances for such resonators, surface preparation including electropolishing is recommended. We have designed and operate a setup for electropolishing in the vertical position of multicell cavities in order to: (i obtain high yield with large elliptical cavities for Superconducting Linac (SPL or European Spallation Source projects; (ii develop a reference installation demonstrating that this process is appropriate for the large scale treatment of cavities in industry. The setup described here is the first one able to electropolish vertically multicell cavities with circulating acid and high safety standards. This equipment makes it possible to use a wide range of parameters such as voltage, acid flow rate, temperature, and nitrogen injection with an R&D purpose in mind. Optimization is studied using modeling with COMSOL software for different cavities. As examples, we present some results for the 704 MHz high-beta SPL cavity and the 1300 MHz International Linear Collider cavity and show the influence of cathode shape on both acid flow and electric field distribution during the process. Importance of the size of the cavity and first results achieved on single-cell and nine-cell cavities will be discussed.

  11. High Temperature Supersonic Jet Noise - Fundamental Studies and Control using Advanced Actuation Methods

    Science.gov (United States)

    2016-08-24

    decades, however methods of measurably controlling -reducing jet noise in an efficient and robust manner remain evasive. Previous research has shown...2016 1-May-2013 30-Apr-2016 High Temperature Supersonic Jet Noise - Fundamental Studies and Control using Advanced Actuation Methods The views...and Control using Advanced Actuation Methods Report Title Understanding and controlling jet noise has been the focus of analytical, computational and

  12. A low-cost hierarchical nanostructured beta-titanium alloy with high strength

    OpenAIRE

    Devaraj, Arun; Joshi, Vineet V.; Srivastava, Ankit; Manandhar, Sandeep; Moxson, Vladimir; Duz, Volodymyr A.; Lavender, Curt

    2016-01-01

    Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio structural materials can reduce the consumption of fossil fuels and in turn CO2 emission. Working towards this goal we achieved high strength in a low cost β-titanium alloy, Ti–1Al–8V–5Fe (Ti185), by hierarchical nanostructure consisting of homogenous distribution of micron-scale and nanoscale α-phase precipitates within the β-phase matrix. The sequence of phase transformation leading to this hierarchical na...

  13. A low-cost hierarchical nanostructured beta-titanium alloy with high strength

    Science.gov (United States)

    Devaraj, Arun; Joshi, Vineet V.; Srivastava, Ankit; Manandhar, Sandeep; Moxson, Vladimir; Duz, Volodymyr A.; Lavender, Curt

    2016-01-01

    Lightweighting of automobiles by use of novel low-cost, high strength-to-weight ratio structural materials can reduce the consumption of fossil fuels and in turn CO2 emission. Working towards this goal we achieved high strength in a low cost β-titanium alloy, Ti–1Al–8V–5Fe (Ti185), by hierarchical nanostructure consisting of homogenous distribution of micron-scale and nanoscale α-phase precipitates within the β-phase matrix. The sequence of phase transformation leading to this hierarchical nanostructure is explored using electron microscopy and atom probe tomography. Our results suggest that the high number density of nanoscale α-phase precipitates in the β-phase matrix is due to ω assisted nucleation of α resulting in high tensile strength, greater than any current commercial titanium alloy. Thus hierarchical nanostructured Ti185 serves as an excellent candidate for replacing costlier titanium alloys and other structural alloys for cost-effective lightweighting applications. PMID:27034109

  14. Highly potent and specific GSK-3beta inhibitors that block tau phosphorylation and decrease alpha-synuclein protein expression in a cellular model of Parkinson's disease.

    Science.gov (United States)

    Kozikowski, Alan P; Gaisina, Irina N; Petukhov, Pavel A; Sridhar, Jayalakshmi; King, LaShaunda T; Blond, Sylvie Y; Duka, Tetyana; Rusnak, Milan; Sidhu, Anita

    2006-02-01

    Research by Klein and co-workers suggests that the inhibition of GSK-3beta by small molecules may offer an important strategy in the treatment of a number of central nervous system (CNS) disorders including Alzheimer's disease, Parkinson's disease, and bipolar disorders. Based on results from kinase-screening assays that identified a staurosporine analogue as a modest inhibitor of GSK-3beta, a series of 3-indolyl-4-indazolylmaleimides was prepared for study in both enzymatic and cell-based assays. Most strikingly, whereas we identified ligands having poor to high potency for GSK-3beta inhibition, only ligands with a Ki value of less than 8 nM, namely maleimides 18 and 22, were found to inhibit Tau phosphorylation at a GSK-3beta-specific site (Ser 396/404). Accordingly, maleimides 18 and 22 may protect neuronal cells against cell death by decreasing the level of alpha-Syn protein expression. We conclude that the GSK-3beta inhibitors described herein offer promise in defending cells against MPP+-induced neurotoxicity and that such compounds will be valuable to explore in animal models of Parkinson's disease as well as in other Tau-related neurodegenerative disease states.

  15. Definition of the minimal requirements within the human beta-globin gene and the dominant control region for high level expression.

    Science.gov (United States)

    Collis, P; Antoniou, M; Grosveld, F

    1990-01-01

    The human beta-globin dominant control region (DCR) was previously identified as a region from the 5' end of the human beta-globin locus which directs high level, site of integration-independent, copy number-dependent expression on a linked human beta-globin gene in transgenic mice and stably transfected mouse erythroleukaemia (MEL) cells. We have now analysed the elements comprising the DCR by systematic deletion mutagenesis in stable MEL transfectants. We have identified two independent elements within the DNase I hypersensitive sites 2 and 3, containing fragments which direct strong transcriptional inducibility of a beta-globin gene. Whilst the remaining two hypersensitive sites do not direct significant transcriptional induction, our data suggest that all four sites may be necessary for the fully regulated expression conferred by the DCR. We have also tested a number of beta-globin minigene constructs under the control of the DCR to assess if any of the local sequences from the gene may be removed without loss of expression. We find that the 3' enhancer may be removed without affecting expression, but there is an absolute requirement for the presence of the second intron, not related to the enhancer present in that intron. Images Fig. 2. Fig. 3. Fig. 4. Fig. 5. PMID:2295312

  16. Measurement of scintillation and ionization yield with high-pressure gaseous mixtures of Xe and TMA for improved neutrinoless double beta decay and dark matter searches

    CERN Document Server

    Nakajima, Y; Matis, H S; Nygren, D; Oliveira, C; Renner, J

    2015-01-01

    Liquid Xe TPCs are among the most popular choices for double beta decay and WIMP dark matter searches. Gaseous Xe has intrinsic advantages when compared to Liquid Xe, specifically, tracking capability and better energy resolution for double beta decay searches. The performance of gaseous Xe can be further improved by molecular additives such as trimethylamine(TMA), which are expected to (1) cool down the ionization electrons, (2) convert Xe excitation energy to TMA ionizations through Penning transfer, and (3) produce scintillation and electroluminescence light in a more easily detectable wavelength (300 nm). These features may provide better tracking and energy resolution for double-beta decay searches. They are also expected to enhance columnar recombination for nuclear recoils, which can be used for searches for WIMP dark matter with directional sensitivity. We constructed a test ionization chamber and successfully measured scintillation and ionization yields at high precision with various Xe and TMA mixtu...

  17. Free-boundary high-beta tokamaks. II. Mathematical intermezzo: Hilbert transforms and conformal mapping

    Science.gov (United States)

    Goedbloed, J. P.

    1982-11-01

    Mathematical techniques are described that facilitate the reduction of the stability problem of a toroidal free-boundary high-β tokamak equilibrium with skin currents to one that is basically one-dimensional. This includes the conformal mapping of the simply connected plasma region onto a circular disk and the conformal mapping of the doubly connected vacuum region onto an annulus by means of the Theodorsen and Garrick nonlinear integral equations. Henrici's method of constructing the discretized Hilbert transforms for periodic functions on the boundaries of these domains provides both the basis for constructing the mappings and the tool for the study of the perturbations. The methods are applied to problems of two-dimensional potential flow with a discontinuity of which the stability of sharp-boundary high-β tokamaks is just a special case.

  18. Recent advances in high-throughput molecular marker identification for superficial and invasive bladder cancers

    DEFF Research Database (Denmark)

    Andersen, Lars Dyrskjøt; Zieger, Karsten; Ørntoft, Torben Falck

    2007-01-01

    individually contributed to the management of the disease. However, the development of high-throughput techniques for simultaneous assessment of a large number of markers has allowed classification of tumors into clinically relevant molecular subgroups beyond those possible by pathological classification. Here......, we review the recent advances in high-throughput molecular marker identification for superficial and invasive bladder cancers....

  19. Internal and External Oxidation of Manganese in Advanced High Strength Steels

    NARCIS (Netherlands)

    Aghaei Lashgari, V.

    2014-01-01

    Advanced high strength steels (AHSS) have been used extensively in the automotive industries. The main characteristic of these steels is combination of high strength and enhanced formability that makes them very attractive for automotive application. However, the major drawback of these steels is th

  20. A constitutive model for the anelastic behavior of Advanced High Strength Steels

    NARCIS (Netherlands)

    Torkabadi, A.; Liempt, van P.; Meinders, V.T.; Boogaard, van den A.H.

    2015-01-01

    In this work a physically based model describing the anelastic behaviour and nonlinear unloading in Advanced High Strength Steels (AHSS) is proposed. The model is fitted to the experimental data obtained from uni-axial tests on a dual-phase high strength steel grade (HCT780). The results show a good

  1. Effects of Early Acceleration of Students in Mathematics on Taking Advanced Mathematics Coursework in High School

    Science.gov (United States)

    Ma, Xin

    2010-01-01

    Based on data from the Longitudinal Study of American Youth (LSAY), students were classified into high-, middle-, and low-ability students. The effects of early acceleration in mathematics on the most advanced mathematics coursework (precalculus and calculus) in high school were examined in each category. Results showed that although early…

  2. Endothelial lipase is highly expressed in macrophages in advanced human atherosclerotic lesions

    DEFF Research Database (Denmark)

    Bartels, Emil D; Nielsen, John E; Lindegaard, Marie Louise Skakkebæk

    2007-01-01

    RNA expression increased markedly when either type of monocytes was differentiated into macrophages. Upon further differentiation into foam cells EL mRNA decreased whereas protein levels remained high compared to monocytes. In conclusion, macrophages in advanced human atherosclerotic lesions display high levels...

  3. Effects of Early Acceleration of Students in Mathematics on Taking Advanced Mathematics Coursework in High School

    Science.gov (United States)

    Ma, Xin

    2010-01-01

    Based on data from the Longitudinal Study of American Youth (LSAY), students were classified into high-, middle-, and low-ability students. The effects of early acceleration in mathematics on the most advanced mathematics coursework (precalculus and calculus) in high school were examined in each category. Results showed that although early…

  4. Phenol-containing macrocyclic diamides as new catalysts in the highly regioselective conversion of epoxides to beta-hydroxy thiocyanates.

    Science.gov (United States)

    Sharghi, H; Nasseri, M A; Niknam, K

    2001-11-02

    The regioselective ring-opening reactions of some epoxides with ammonium thiocyanate in the presence of a series of new phenol-containing macrocyclic diamides and also dibenzo-18-crown-6-, 18-crown-6-, benzo-15-crown-5-, and pyridine-containing macrocyclic diamide have been studied. The epoxides were subject to cleavage by NH(4)SCN in the presence of these catalysts under mild reaction conditions in various aprotic solvents. In this study, reagents and conditions have been discovered with which the individual beta-hydroxy thiocyanates can be synthesized in high yield and with more than 90% regioselectivity. The results can be discussed in terms of a four-step mechanism: (1) formation of complex between catalyst and NH(4)SCN, (2) release of SCN(-) nucleophile from the complex, (3) reaction of the active nucleophile at the less sterically hindered site in the epoxide, and (4) regeneration of catalyst. The major advantages of this method are as follows: (1) high regioselectivity, (2) simple regeneration of catalyst, (3) its reuse through several cycles without a decrease in activity, and (4) ease of workup of the reaction.

  5. Properties of the open cluster Tombaugh 1 from high resolution spectroscopy and uvbyCaH$\\beta$ photometry

    CERN Document Server

    Silva, João V Sales; Anthony-Twarog, Barbara J; Bidin, Christian Moni; Costa, Edgardo; Twarog, Bruce A

    2015-01-01

    Open clusters can be the key to deepen our knowledge on various issues involving the structure and evolution of the Galactic disk and details of stellar evolution because a cluster's properties are applicable to all its members. However the number of open clusters with detailed analysis from high resolution spectroscopy and/or precision photometry imposes severe limitation on studies of these objects. To expand the number of open clusters with well-defined chemical abundances and fundamental parameters, we investigate the poorly studied, anticenter open cluster Tombaugh 1. Using precision uvbyCaH$\\beta$ photometry and high resolution spectroscopy, we derive the cluster's properties and, for the first time, present detailed abundance analysis of 10 potential cluster stars. Using radial position from the cluster center and multiple color indices, we have isolated a sample of unevolved probable, single-star members of Tombaugh 1. The weighted photometric metallicity from $m_1$ and $hk$ is [Fe/H] = -0.10 $\\pm$ 0....

  6. Improved background rejection in neutrinoless double beta decay experiments using a magnetic field in a high pressure xenon TPC

    CERN Document Server

    Renner, J; Hernando, J A; Imzaylov, A; Monrabal, F; Muñoz, J; Nygren, D; Gomez-Cadenas, J J

    2015-01-01

    We demonstrate that the application of an external magnetic field could lead to an improved background rejection in neutrinoless double-beta (0nbb) decay experiments using a high pressure xenon (HPXe) TPC. HPXe chambers are capable of imaging electron tracks, a feature that enhances the separation between signal events (the two electrons emitted in the 0nbb decay of 136Xe) and background events, arising chiefly from single electrons of kinetic energy compatible with the end-point of the 0nbb decay (Qbb ). Applying an external magnetic field of sufficiently high intensity (in the range of 0.5-1 Tesla for operating pressures in the range of 5-15 atmospheres) causes the electrons to produce helical tracks. Assuming the tracks can be properly reconstructed, the sign (direction) of curvature can be determined at several points along these tracks, and such information can be used to separate signal (0nbb) events containing two electrons producing a track with two different directions of curvature from background (s...

  7. Development of high poloidal beta, steady-state scenario with ITER-like W divertor on EAST

    Science.gov (United States)

    Garofalo, A. M.; Lanctot, M.; Gong, X. Z.; Ding, S.; Li, G.; Liu, H.; Lyu, B.; Qian, J.; Bonoli, P. T.; Shiraiwa, S.; Holcomb, C.; McClenaghan, J.

    2016-10-01

    Experiments on EAST have started to adapt the fully-noninductive high poloidal beta scenario developed on DIII-D, in order to demonstrate steady state tokamak operation at high performance on metal walls. Unlike on DIII-D, where the creation of a broad current profile requires early heating at low density, on EAST a broad current profile can be obtained simply by increasing the electron density, when most of the current drive is provided by lower hybrid wave. Systematic scans yield lower internal inductance with higher density. The hypothesis is that the LHCD profile becomes more off-axis with higher density. With the newly commissioned POINT (polarimeter-interferometer) diagnostic for q-profile measurements, these experiments enable strict tests of LHCD deposition models. Supported by US DOE under DE-SC0010685, DE-SC0010492 DE-FC02-04ER54698, DE-AC02-09-CH11466, DE-AC52-07NA27344, DE-AC05-00OR22725, and the National Magnetic Confinement Fusion Program of China (No. 2015GB110001 and 2015GB102000).

  8. Unexpectedly high beta-diversity of root-associated fungal communities in the Bolivian Andes

    DEFF Research Database (Denmark)

    Barnes, Christopher James; Maldonado Goyzueta, Carla Brenda; Frøslev, Tobias Guldberg;

    2016-01-01

    Bolivia is one of the most biologically diverse countries on the planet. Between the Andes and the Amazon drainage basin spans the Yungas, a vast forested region shown to be extremely species rich in macro-organisms. However, it remains unclear whether this high diversity is also reflected in mic...... root-associated fungal diversity in subtropical regions. This study sheds further light on the diversity and distribution of the world's "hidden biodiversity"....

  9. Experimental research of double beta decay of atomic nuclei

    CERN Document Server

    Danevich, F A

    2011-01-01

    Results of several double beta decay experiments, performed with the help of low background crystal scintillators, are presented. In particular, the half-life value of the two-neutrino double beta decay of 116-Cd has been measured as 2.9 10^{19} yr, and the new half-life limit on the neutrinoless double beta decay of 116-Cd has been established as >1.7 10^{23} yr at 90%, which corresponds to a restriction on the neutrino mass <1.7 eV. New half-life bounds on the level of 10^{17}-10^{21} yr were set for double beta processes in 64-Zn, 70-Zn, 106-Cd, 108-Cd, 114-Cd, 136-Ce, 138-Ce, 142-Ce, 160-Gd, 180-W, and 186-W by using low-background CdWO4, GSO, and ZnWO4 crystal scintillators. The claim of discovery of the neutrinoless double beta decay of 76-Ge [Mod. Phys. Lett. A 16 (2001) 2409] was analyzed. The demands of the future high sensitivity double beta decay experiments, aiming to observe the neutrinoless double beta decay or to advance restrictions on the neutrino mass to < 0.01 eV, were considered. Req...

  10. A Novel Highly Thermostable Multifunctional Beta-Glycosidase from Crenarchaeon Acidilobus saccharovorans

    Directory of Open Access Journals (Sweden)

    Vadim M. Gumerov

    2015-01-01

    Full Text Available We expressed a putative β-galactosidase Asac_1390 from hyperthermophilic crenarchaeon Acidilobus saccharovorans in Escherichia coli and purified the recombinant enzyme. Asac_1390 is composed of 490 amino acid residues and showed high sequence similarity to family 1 glycoside hydrolases from various thermophilic Crenarchaeota. The maximum activity was observed at pH 6.0 and 93°C. The half-life of the enzyme at 90°C was about 7 hours. Asac_1390 displayed high tolerance to glucose and exhibits hydrolytic activity towards cellobiose and various aryl glucosides. The hydrolytic activity with p-nitrophenyl (pNP substrates followed the order pNP-β-D-galactopyranoside (328 U mg−1, pNP-β-D-glucopyranoside (246 U mg−1, pNP-β-D-xylopyranoside (72 U mg−1, and pNP-β-D-mannopyranoside (28 U mg−1. Thus the enzyme was actually a multifunctional β-glycosidase. Therefore, the utilization of Asac_1390 may contribute to facilitating the efficient degradation of lignocellulosic biomass and help enhance bioconversion processes.

  11. High copy number of mitochondrial DNA predicts poor prognosis in patients with advanced stage colon cancer.

    Science.gov (United States)

    Wang, Yun; He, Shuixiang; Zhu, Xingmei; Qiao, Wei; Zhang, Juan

    2016-12-23

    The aim of this investigation was to determine whether alterations in mitochondrial DNA (mtDNA) copy number in colon cancer were associated with clinicopathological parameters and postsurgical outcome. By quantitative real-time PCR assay, the mtDNA copy number was detected in a cohort of colon cancer and matched adjacent colon tissues (n = 162). The majority of patients had higher mtDNA content in colon cancer tissues than matched adjacent colon tissues. Moreover, high mtDNA content in tumor tissues was associated with larger tumor size, higher serum CEA level, advanced TNM stage, vascular emboli, and liver metastases. Further survival curve analysis showed that high mtDNA content was related to the worst survival in patients with colon cancer at advanced TNM stage. High mtDNA content is a potential effective factor of poor prognosis in patients with advanced stage colon cancer.

  12. Analysis of the Repertoire Features of TCR Beta Chain CDR3 in Human by High-Throughput Sequencing

    Directory of Open Access Journals (Sweden)

    Xianliang Hou

    2016-07-01

    Full Text Available Background/Aims: To ward off a wide variety of pathogens, the human adaptive immune system harbors a vast array of T-cell receptors, collectively referred to as the TCR repertoire. Assessment of the repertoire features of TCR is vital for us to deeper understand of immune behaviour and immune response. Methods: In this study, we used a combination of multiplex-PCR, Illumina sequencing and IMGT (ImMunoGeneTics/HighV-QUEST for a standardized analysis of the repertoire features of TCR beta chain in the blood of healthy individuals, including the repertoire features of public TCR complementarity-determining regions (CDR3 sequences, highly expanded clones, long TCR CDR3 sequences. Results: We found that public CDR3 sequences and high-frequency sequences had the same characteristics, both of them had fewer nucleotide additions and shorter CDR3 length, which were closer to the germline sequence. Moreover, our studies provided evidence that public amino acid sequences are produced by multiple nucleotide sequences. Notably, there was skewed VDJ segment usage in long CDR3 sequences, the expression levels of 10 TRβV segments, 7 TRβJ segments and 2 TRβD segments were significantly different in the long CDR3 sequences compared to the short CDR3 sequences. Moreover, we identified that extensive N additions and increase of D gene usage contributing to TCR CDR3 length, and observed there was distinct usage frequency of amino acids in long CDR3 sequences compared to the short CDR3 sequences. Conclusions: Some repertoire features could be observed in the public sequences, highly abundance clones, and long TCR CDR3 sequences, which might be helpful for further study of immune behavior and immune response.

  13. Advances in high voltage insulation and arc interruption in SF6 and vacuum

    CERN Document Server

    Maller, V N

    1982-01-01

    Advances in High Voltage Insulation and Arc Interruption in SF6 and Vacuum deals with high voltage breakdown and arc extinction in sulfur hexafluoride (SF6) and high vacuum, with special emphasis on the application of these insulating media in high voltage power apparatus and devices. The design and developmental aspects of various high voltage power apparatus using SF6 and high vacuum are highlighted. This book is comprised of eight chapters and opens with a discussion on electrical discharges in SF6 and high vacuum, along with the properties and handling of SF6 gas. The following chapters fo

  14. Unexpectedly high beta-diversity of root-associated fungal communities in the Bolivian Andes

    DEFF Research Database (Denmark)

    Barnes, Christopher James; Maldonado Goyzueta, Carla Brenda; Frøslev, Tobias Guldberg;

    2016-01-01

    variation respectively. Surprisingly, altitude does not influence community formation, and there is limited evidence that climate (precipitation and temperature) play a role. Our results suggest that sampling should be performed over a wide geographical and environmental range in order to capture the full......Bolivia is one of the most biologically diverse countries on the planet. Between the Andes and the Amazon drainage basin spans the Yungas, a vast forested region shown to be extremely species rich in macro-organisms. However, it remains unclear whether this high diversity is also reflected...... in microbial diversity. Here we assess the genetic, taxonomic and functional diversity of root-associated fungi surrounding Cinchona calisaya calisaya trees, a typical element of the intermediate altitudes of the Bolivian Yungas. We determine the relative effects of edaphic properties, climate, and geography...

  15. Steady-state thermal studies on the HIE-ISOLDE high-$\\beta$ superconducting cavities

    CERN Document Server

    Alberty, L

    2013-01-01

    The activity of the High Intensity and Energy ISOLDE (HIE-ISOLDE) project aims to construct a superconducting linac based on 101.28 MHz niobium sputtered Quarter Wave Resonators (QWRs). For this, several prototypes of superconducting cavities are currently being developed at CERN using OFE copper as substrate material for Niobium film coating. Two main concepts are currently under development: one consists of rolled, machined, deepdrawed and welded parts; the other is based on machined parts which are put together using electron beam welding. This study presents the results of simulations carried out in order to assess the thermal performance of different designs. The interest for such analysis was raised up before launching the manufacture of the first industrial series, since both rolled and bulk approaches seemed possible.

  16. Unexpectedly high beta-diversity of root-associated fungal communities in the Bolivian Andes

    DEFF Research Database (Denmark)

    Barnes, Christopher James; Maldonado Goyzueta, Carla Brenda; Frøslev, Tobias Guldberg

    2016-01-01

    in microbial diversity. Here we assess the genetic, taxonomic and functional diversity of root-associated fungi surrounding Cinchona calisaya calisaya trees, a typical element of the intermediate altitudes of the Bolivian Yungas. We determine the relative effects of edaphic properties, climate, and geography...... in regulating fungal community assembly. We show that α-diversity for these fungal communities was similar to temperate and arid ecosystems, averaging 90.1 operational taxonomic units (OTUs) per sample, with reads predominantly assigned to the Ascomycota phylum and with a saprotrophic lifestyle. ß......-diversity was calculated as the distance-decay rate, and in contrast to α-diversity, was exceptionally high with a rate of -0.407. Soil properties (pH and P) principally regulated fungal community assembly in an analogous manner to temperate environments, with pH and phosphorus explaining 7.8 % and 7.2 % of community...

  17. Synergistic effects of high fat feeding and apolipoprotein E deletion on enterocytic amyloid-beta abundance

    Directory of Open Access Journals (Sweden)

    Dhaliwal Satvinder S

    2008-04-01

    Full Text Available Abstract Background Amyloid-β (Aβ, a key protein found in amyloid plaques of subjects with Alzheimer's disease is expressed in the absorptive epithelial cells of the small intestine. Ingestion of saturated fat significantly enhances enterocytic Aβ abundance whereas fasting abolishes expression. Apolipoprotein (apo E has been shown to directly modulate Aβ biogenesis in liver and neuronal cells but it's effect in enterocytes is not known. In addition, apo E modulates villi length, which may indirectly modulate Aβ as a consequence of differences in lipid absorption. This study compared Aβ abundance and villi length in wild-type (WT and apo E knockout (KO mice maintained on either a low-fat or high-fat diet. Wild-type C57BL/6J and apo E KO mice were randomised for six-months to a diet containing either 4% (w/w unsaturated fats, or chow comprising 16% saturated fats and 1% cholesterol. Quantitative immunohistochemistry was used to assess Aβ abundance in small intestinal enterocytes. Apo E KO mice given the low-fat diet had similar enterocytic Aβ abundance compared to WT controls. Results The saturated fat diet substantially increased enterocytic Aβ in WT and in apo E KO mice, however the effect was greater in the latter. Villi height was significantly greater in apo E KO mice than for WT controls when given the low-fat diet. However, WT mice had comparable villi length to apo E KO when fed the saturated fat and cholesterol enriched diet. There was no effect of the high-fat diet on villi length in apo E KO mice. Conclusion The findings of this study are consistent with the notion that lipid substrate availability modulates enterocytic Aβ. Apo E may influence enterocytic lipid availability by modulating absorptive capacity.

  18. Unexpectedly High Beta-Diversity of Root-Associated Fungal Communities in the Bolivian Andes

    Science.gov (United States)

    Barnes, Christopher J.; Maldonado, Carla; Frøslev, Tobias G.; Antonelli, Alexandre; Rønsted, Nina

    2016-01-01

    Bolivia is one of the most biologically diverse countries on the planet. Between the Andes and the Amazon drainage basin spans the Yungas, a vast forested region shown to be extremely species rich in macro-organisms. However, it remains unclear whether this high diversity is also reflected in microbial diversity. Here we assess the genetic, taxonomic and functional diversity of root-associated fungi surrounding Cinchona calisaya trees, a typical element of the intermediate altitudes of the Bolivian Yungas. We determine the relative effects of edaphic properties, climate, and geography in regulating fungal community assembly. We show that α-diversity for these fungal communities was similar to temperate and arid ecosystems, averaging 90.1 operational taxonomic units (OTUs) per sample, with reads predominantly assigned to the Ascomycota phylum and with a saprotrophic lifestyle. ß-diversity was calculated as the distance-decay rate, and in contrast to α-diversity, was exceptionally high with a rate of −0.407. Soil properties (pH and P) principally regulated fungal community assembly in an analogous manner to temperate environments, with pH and phosphorus explaining 7.8 and 7.2% of community variation respectively. Surprisingly, altitude does not influence community formation, and there is limited evidence that climate (precipitation and temperature) play a role. Our results suggest that sampling should be performed over a wide geographical and environmental range in order to capture the full root-associated fungal diversity in subtropical regions. This study sheds further light on the diversity and distribution of the world's “hidden biodiversity.” PMID:27630629

  19. Role of quenching on alpha/beta separation in liquid scintillation counting for several high capacity cocktails

    Energy Technology Data Exchange (ETDEWEB)

    Pujol, L.; Sanchez-Cabeza, J.-A. [Universidad Autonoma de Barcelona (Spain). Facultad de Ciencias

    1997-04-01

    The optimization of alpha/beta separation in liquid scintillation using pulse shape analysis is convenient for the simultaneous determination of alpha and beta emitters in natural water and other samples. In this work, alpha/beta separation was studied for different scintillant/vial combinations and it was observed that both the optimum pulse shape discrimination level and the total interference value (that is, the summed relative interference between alpha and beta spectra) were dependent on the sample quenching and independent of the scintillant/vial combination. These results provide a simple method for modifying the counting configuration, such as a change in the cocktail, vial or sample characteristics, without the need to perform exhaustive parameter optimizations. Also, it was observed that, for our counting conditions, the combination of Ultima Gold AB scintillation cocktail with Zinsser low diffusion vials presented the lowest total interference, namely 0.94 {+-} 0.28%, which is insignificant for the counting of environmental samples. (Author).

  20. Spleen tyrosine kinase mediates high glucose-induced transforming growth factor-{beta}1 up-regulation in proximal tubular epithelial cells

    Energy Technology Data Exchange (ETDEWEB)

    Yang, Won Seok; Chang, Jai Won [Division of Nephrology, Department of Internal Medicine, Asan Medical Center, College of Medicine, University of Ulsan, Seoul (Korea, Republic of); Han, Nam Jeong [Department of Cell Biology, Asan Institute for Life Sciences, Seoul (Korea, Republic of); Lee, Sang Koo [Division of Nephrology, Department of Internal Medicine, Asan Medical Center, College of Medicine, University of Ulsan, Seoul (Korea, Republic of); Park, Su-Kil, E-mail: skpark@amc.seoul.kr [Division of Nephrology, Department of Internal Medicine, Asan Medical Center, College of Medicine, University of Ulsan, Seoul (Korea, Republic of)

    2012-09-10

    The role of spleen tyrosine kinase (Syk) in high glucose-induced intracellular signal transduction has yet to be elucidated. We investigated whether Syk is implicated in high glucose-induced transforming growth factor-{beta}1 (TGF-{beta}1) up-regulation in cultured human proximal tubular epithelial cells (HK-2 cell). High glucose increased TGF-{beta}1 gene expression through Syk, extracellular signal-regulated kinase (ERK), AP-1 and NF-{kappa}B. High glucose-induced AP-1 DNA binding activity was decreased by Syk inhibitors and U0126 (an ERK inhibitor). Syk inhibitors suppressed high glucose-induced ERK activation, whereas U0126 had no effect on Syk activation. High glucose-induced NF-{kappa}B DNA binding activity was also decreased by Syk inhibitors. High glucose increased nuclear translocation of p65 without serine phosphorylation of I{kappa}B{alpha} and without degradation of I{kappa}B{alpha}, but with an increase in tyrosine phosphorylation of I{kappa}B{alpha} that may account for the activation of NF-{kappa}B. Both Syk inhibitors and Syk-siRNA attenuated high glucose-induced I{kappa}B{alpha} tyrosine phosphorylation and p65 nuclear translocation. Depletion of p21-activated kinase 2 (Pak2) by transfection of Pak2-siRNA abolished high glucose-induced Syk activation. In summary, high glucose-induced TGF-{beta}1 gene transcription occurred through Pak2, Syk and subsequent ERK/AP-1 and NF-{kappa}B pathways. This suggests that Syk might be implicated in the diabetic kidney disease.

  1. Impact of ideal MHD stability limits on high-beta hybrid operation

    Science.gov (United States)

    Piovesan, P.; Igochine, V.; Turco, F.; Ryan, D. A.; Cianciosa, M. R.; Liu, Y. Q.; Marrelli, L.; Terranova, D.; Wilcox, R. S.; Wingen, A.; Angioni, C.; Bock, A.; Chrystal, C.; Classen, I.; Dunne, M.; Ferraro, N. M.; Fischer, R.; Gude, A.; Holcomb, C. T.; Lebschy, A.; Luce, T. C.; Maraschek, M.; McDermott, R.; Odstrčil, T.; Paz-Soldan, C.; Reich, M.; Sertoli, M.; Suttrop, W.; Taylor, N. Z.; Weiland, M.; Willensdorfer, M.; The ASDEX Upgrade Team; The DIII-D Team; The EUROfusion MST1 Team

    2017-01-01

    The hybrid scenario is a candidate for stationary high-fusion gain tokamak operation in ITER and DEMO. To obtain such performance, the energy confinement and the normalized pressure {βN} must be maximized, which requires operating near or above ideal MHD no-wall limits. New experimental findings show how these limits can affect hybrid operation. Even if hybrids are mainly limited by tearing modes, proximity to the no-wall limit leads to 3D field amplification that affects plasma profiles, e.g. rotation braking is observed in ASDEX Upgrade throughout the plasma and peaks in the core. As a result, even the small ASDEX Upgrade error fields are amplified and their effects become visible. To quantify such effects, ASDEX Upgrade measured the response to 3D fields applied by 8× 2 non-axisymmetric coils as {βN} approaches the no-wall limit. The full n  =  1 response profile and poloidal structure were measured by a suite of diagnostics and compared with linear MHD simulations, revealing a characteristic feature of hybrids: the n  =  1 response is due to a global, marginally-stable n  =  1 kink characterized by a large m  =  1, n  =  1 core harmonic due to q min being just above 1. A helical core distortion of a few cm forms and affects various core quantities, including plasma rotation, electron and ion temperature, and intrinsic W density. In similar experiments, DIII-D also measured the effect of this helical core on the internal current profile, providing information useful to understanding of the physics of magnetic flux pumping, i.e. anomalous current redistribution by MHD modes that keeps {{q}\\text{min}}>1 . Thanks to flux pumping, a broad current profile is maintained in DIII-D even with large on-axis current drive, enabling fully non-inductive operation at high {βN} up to 3.5-4.

  2. Development of Advanced High Uranium Density Fuels for Light Water Reactors

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, James [Univ. of Wisconsin, Madison, WI (United States); Butt, Darryl [Boise State Univ., ID (United States); Meyer, Mitchell [Idaho National Lab. (INL), Idaho Falls, ID (United States); Xu, Peng [Westinghouse Electric Corporation, Pittsburgh, PA (United States)

    2016-02-15

    This work conducts basic materials research (fabrication, radiation resistance, thermal conductivity, and corrosion response) on U3Si2 and UN, two high uranium density fuel forms that have a high potential for success as advanced light water reactor (LWR) fuels. The outcome of this proposed work will serve as the basis for the development of advance LWR fuels, and utilization of such fuel forms can lead to the optimization of the fuel performance related plant operating limits such as power density, power ramp rate and cycle length.

  3. The Copper Substrate Developments for the HIE-ISOLDE High-Beta Quarter Wave Resonator

    CERN Document Server

    Alberty, L; Aviles, I; Calatroni, S; Capatina, O; Foffano, G; Kadi, Y; Moyret, P; Schirm, K-M; Tardy, T; Venturini Delsolaro, W; D'Elia, A

    2013-01-01

    A new Linac using superconducting Quarter-Wave Resonators (QWRs) is under construction at CERN in the framework of the HIE-ISOLDE project. The QWRs are made by niobium sputtered on a bulk copper substrate. The working frequency at 4.5 K is 101.28 MHz and they will provide 6 MV/m accelerating gradient on the beam axis with a total maximum power dissipation of 10 W. The properties of the cavity substrate have a direct impact on the final cavity performance. The copper substrate has to ensure an optimum surface for the niobium sputtered layer. It has also to fulfil the required geometrical tolerances, the mechanical stability during operation and the thermal performance to optimally extract the RF dissipated power on cavity walls. The paper presents the mechanical design of the high β cavities. The procurement process of the copper raw material is detailed, including specifications and tests. The manufacturing sequence of the complete cavity is then explained and the structural and thermo-mechanical behaviour...

  4. Cathepsin inhibition-induced lysosomal dysfunction enhances pancreatic beta-cell apoptosis in high glucose.

    Science.gov (United States)

    Jung, Minjeong; Lee, Jaemeun; Seo, Hye-Young; Lim, Ji Sun; Kim, Eun-Kyoung

    2015-01-01

    Autophagy is a lysosomal degradative pathway that plays an important role in maintaining cellular homeostasis. We previously showed that the inhibition of autophagy causes pancreatic β-cell apoptosis, suggesting that autophagy is a protective mechanism for the survival of pancreatic β-cells. The current study demonstrates that treatment with inhibitors and knockdown of the lysosomal cysteine proteases such as cathepsins B and L impair autophagy, enhancing the caspase-dependent apoptosis of INS-1 cells and islets upon exposure to high concentration of glucose. Interestingly, treatment with cathepsin B and L inhibitors prevented the proteolytic processing of cathepsins B, D and L, as evidenced by gradual accumulation of the respective pro-forms. Of note, inhibition of aspartic cathepsins had no effect on autophagy and cell viability, suggesting the selective role of cathepsins B and L in the regulation of β-cell autophagy and apoptosis. Lysosomal localization of accumulated pro-cathepsins in the presence of cathepsin B and L inhibitors was verified via immunocytochemistry and lysosomal fractionation. Lysotracker staining indicated that cathepsin B and L inhibitors led to the formation of severely enlarged lysosomes in a time-dependent manner. The abnormal accumulation of pro-cathepsins following treatment with inhibitors of cathepsins B and L suppressed normal lysosomal degradation and the processing of lysosomal enzymes, leading to lysosomal dysfunction. Collectively, our findings suggest that cathepsin defects following the inhibition of cathepsin B and L result in lysosomal dysfunction and consequent cell death in pancreatic β-cells.

  5. Production of high-beta magnetised plasmas by colliding supersonic flows from inverse wire arrays

    Science.gov (United States)

    Hare, Jack; Suttle, Lee; Lebedev, Sergey; Bennett, Matthew; Burdiak, Guy; Clayson, Thomas; Suzuki-Vidal, Francisco; Swadling, George; Patankar, Siddharth; Robinson, Timothy; Stuart, Nicholas; Smith, Roland; Yang, Qingguo; Wu, Jian; Rozmus, Wojciech

    2015-11-01

    HEDP often exhibit a high plasma β and an electron Hall parameter greater than one. This results in a complex interplay between the transport of heat and magnetic fields, relevant to the Magnetised Liner Inertial Fusion (MagLIF) concept. We can produce such plasmas by colliding two supersonic quasi-planar flows from two adjacent inverse wire arrays made from carbon. The standing shock formed by the collision heats and compresses the plasma. The plasma flows advect magnetic fields which are perpendicular to the flow direction. Depending on the experimental set up, this can result in either flux compression or reconnection in the interaction region. The experiments are conducted on MAGPIE (1.4 MA, 250 ns current pulse). The formed shock is stable over long timescales (~100 ns), and the electron temperature (100 eV) is close to the ion temperature (500 eV), measured by spatially resolved Thomson scattering. Magnetic fields above 5 T is observed using a Faraday rotation diagnostic, and an electron density of around 5x1017 cm-3 is measured by interferometry.

  6. Implementation of an AMBA Advanced High Performance Bus protocol IP block

    Directory of Open Access Journals (Sweden)

    Mahendra Vucha Sandeep Magarde

    2011-08-01

    Full Text Available The design of an AMBA advanced high performance bus (AHB protocol IP block is presented in this paper. The AHB (Advanced High-performance Bus is a high-performance bus in AMBA (Advanced Microcontroller Bus Architecture family. This AHB can be used in high clock frequency system modules. The AHB acts as the high-performance system backbone bus. AHB supports the efficient connection of processors, on-chip memories and off-chip external memory interfaces with low-power peripheral macro cell functions. In this work, the design of the Advanced High-Performance Bus Protocol is developed which has the basic blocks such as Master and Slave. The arbitration mechanism is used to ensure that only one master has access to the bus at any one time and the AHB decoder is used to decode the address of each transfer and provide a select signal for the slave that is involved in the transfer. This AMBA-AHB protocol can be adopted in all the application provided the design should be an AHB compliant.

  7. Beta-methyl substitution of cyclohexylalanine in Dmt-Tic-Cha-Phe peptides results in highly potent delta opioid antagonists.

    Science.gov (United States)

    Tóth, Géza; Ioja, Eniko; Tömböly, Csaba; Ballet, Steven; Tourwé, Dirk; Péter, Antal; Martinek, Tamás; Chung, Nga N; Schiller, Peter W; Benyhe, Sándor; Borsodi, Anna

    2007-01-25

    The opioid peptide TIPP (H-Tyr-Tic-Phe-Phe-OH, Tic:1,2,3,4-tetrahydroisoquinoline-3-carboxylic acid) was substituted with Dmt (2',6'-dimethyltyrosine) and a new unnatural amino acid, beta-MeCha (beta-methyl-cyclohexylalanine). This double substitution led to a new series of opioid peptides displaying subnanomolar delta antagonist activity and mu agonist or antagonist properties depending on the configuration of the beta-MeCha residue. The most promising analog, H-Dmt-Tic-(2S,3S)-beta-MeCha-Phe-OH was a very selective delta antagonist both in the mouse vas deferens (MVD) assay (Ke = 0.241 +/- 0.05 nM) and in radioligand binding assay (K i delta = 0.48 +/- 0.05 nM, K i mu/K i delta = 2800). The epimeric peptide H-Dmt-Tic-(2S,3R)-beta-MeCha-Phe-OH and the corresponding peptide amide turned out to be mixed partial mu agonist/delta antagonists in the guinea pig ileum and MVD assays. Our results constitute further examples of the influence of Dmt and beta-methyl substitution as well as C-terminal amidation on the potency, selectivity, and signal transduction properties of TIPP related peptides. Some of these compounds represent valuable pharmacological tools for opioid research.

  8. Highly effective recognition of carbohydrates by phenanthroline-based receptors: alpha- versus beta-anomer binding preference.

    Science.gov (United States)

    Mazik, Monika; Hartmann, Andrè; Jones, Peter G

    2009-09-14

    (1)H NMR spectroscopic titrations in competitive and non-competitive media, as well as binding studies in two-phase systems, such as phase transfer of sugars from aqueous into organic solvents and dissolution of solid carbohydrates in apolar media revealed both highly effective recognition of neutral carbohydrates and interesting binding preferences of an acyclic phenanthroline-based receptor 1. Compared to the previously described acyclic receptors, compound 1 displays significantly higher binding affinities, the rare capability to extract sugars from water into non-polar organic solutions and alpha- versus beta-anomer binding preference in the recognition of glycosides, which differs from those observed for other receptor systems. X-ray crystallographic investigations revealed the presence of water molecules in the binding pocket of 1 that are engaged in the formation of hydrogen-bonding motifs similar to those suggested by molecular modelling for the sugar OH groups in the receptor-sugar complexes. The molecular modelling calculations, synthesis, crystal structure and binding properties of 1 are described and compared with those of the previously described receptors.

  9. PandaX-III: Searching for Neutrinoless Double Beta Decay with High Pressure $^{136}$Xe Gas Time Projection Chambers

    CERN Document Server

    Chen, Xun; Galan, Javier; Giboni, Karl; Giuliani, Franco; Gu, Linghui; Han, Ke; Ji, Xiangdong; Lin, Heng; Liu, Jianglai; Ni, Kaixiang; Kusano, Hiroki; Ren, Xiangxiang; Wang, Shaobo; Yang, Yong; Zhang, Dan; Zhang, Tao; Zhao, Li; Sun, Xiangming; Hu, Shouyang; Jian, Siyu; Li, Xinglong; Li, Xiaomei; Liang, Hao; Zhang, Huanqiao; Zhao, Mingrui; Zhou, Jing; Mao, Yajun; Qiao, Hao; Wang, Siguang; Yuan, Ying; Wang, Meng; Khan, Amir N; Raper, Neill; Tang, Jian; Wang, Wei; Dong, Jianing; Feng, Changqing; Li, Chen; Liu, Jianbei; Liu, Shubin; Wang, Xiaolian; Zhu, Danyang; Castel, Juan F; Cebrián, Susana; Dafni, Theopisti; Garza, Javier G; Irastorza, Igor G; Iguaz, Francisco J; Luzón, Gloria; Mirallas, Hector; Aune, Stephan; Berthoumieux, Eric; Bedfer, Yann; Calvet, Denis; d'Hose, Nicole; Delbart, Alain; Diakaki, Maria; Ferrer-Ribas, Esther; Ferrero, Andrea; Kunne, Fabienne; Neyret, Damien; Papaevangelou, Thomas; Sabatié, Franck; Vanderbroucke, Maxence; Tan, Andi; Haxton, Wick; Mei, Yuan; Kobdaj, Chinorat; Yan, Yu-Peng

    2016-01-01

    Searching for the Neutrinoless Double Beta Decay (NLDBD) is now regarded as the topmost promising technique to explore the nature of neutrinos after the discovery of neutrino masses in oscillation experiments. PandaX-III (Particle And Astrophysical Xenon Experiment III) will search for the NLDBD of \\xeots at the China Jin Ping underground Laboratory (CJPL). In the first phase of the experiment, a high pressure gas Time Projection Chamber (TPC) will contain 200 kg, 90\\% \\xeots enriched gas operated at 10 bar. Fine pitch micro-pattern gas detector (Microbulk Micromegas) will be used at both ends of the TPC for the charge readout with a cathode in the middle. Charge signals can be used to reconstruct tracks of NLDBD events and provide good energy and spatial resolution. The detector will be immersed in a large water tank to ensure $\\sim$5~m of water shielding in all directions. The second phase, a ton-scale experiment, will consist of five TPCs in the same water tank, with improved energy resolution and better c...

  10. Stellar modelling of Spica, a high-mass spectroscopic binary with a beta Cep variable primary component

    CERN Document Server

    Tkachenko, A; Aerts, C; Pavlovski, K; Papics, P I; Zwintz, K; Cameron, C; Walker, G A H; Kuschnig, R; Degroote, P; Debosscher, J; Moravveji, E; Kolbas, V; Guenther, D B; Moffat, A F J; Rowe, J F; Rucinski, S M; Sasselov, D; Weiss, W W

    2016-01-01

    Binary stars provide a valuable test of stellar structure and evolution, because the masses of the individual stellar components can be derived with high accuracy and in a model-independent way. In this work, we study Spica, an eccentric double-lined spectroscopic binary system with a beta Cep type variable primary component. We use state-of-the-art modelling tools to determine accurate orbital elements of the binary system and atmospheric parameters of both stellar components. We interpret the short-period variability intrinsic to the primary component, detected on top of the orbital motion both in the photometric and spectroscopic data. The non-LTE based spectrum analysis reveals two stars of similar atmospheric chemical composition consistent with the present day cosmic abundance standard defined by Nieva&Przybilla (2012). The masses and radii of the stars are found to be 11.43+/-1.15 M_sun and 7.21+/-0.75 M_sun, and 7.47+/-0.54 R_sun and 3.74+/-0.53 R_sun for the primary and secondary, respectively. W...

  11. Orbital parameters, masses and distance to Beta Centauri determined with the Sydney University Stellar Interferometer and high resolution spectroscopy

    CERN Document Server

    Davis, J; Seneta, E B; Tango, W J; Booth, A J; O'Byrne, J W; Thorvaldson, E D; Ausseloos, M; Aerts, C; Uytterhoeven, K

    2004-01-01

    The bright southern binary star beta Centauri (HR 5267) has been observed with the Sydney University Stellar Interferometer (SUSI) and spectroscopically with the ESO CAT and Swiss Euler telescopes at La Silla. The interferometric observations have confirmed the binary nature of the primary component and have enabled the determination of the orbital parameters of the system. At the observing wavelength of 442 nm the two components of the binary system have a magnitude difference of 0.15. The combination of interferometric and spectroscopic data gives the following results: orbital period 357 days, semi-major axis 25.30 mas, inclination 67.4 degrees, eccentricity 0.821, distance 102.3 pc, primary and secondary masses M1 = M2 = 9.1 solar masses and absolute visual magnitudes of the primary and secondary M1V = -3.85 and M2V = -3.70. The high accuracy of the results offers a fruitful starting point for future asteroseismic modelling of the pulsating binary components.

  12. Advanced Control Scenario of High-Performance Steady-State Operation for JT-60 Superconducting Tokamak

    Institute of Scientific and Technical Information of China (English)

    H. Tamai; Y. Kamada; A. Sakasai; S. Ishida; G. Kurita; M. Matsukawa; K. Urata; S. Sakurai; K. Tsuchiya; A. Morioka; Y. M. Miura; K. Kizu

    2004-01-01

    Plasma control on high-βN steady-state operation for JT-60 superconducting modification is discussed. Accessibility to high-βN exceeding the free-boundary limit is investigated with the stabilising wall of reduced-activated ferritic steel and the active feedback control of the in-vessel non-axisymmetric field coils. Taking the merit of superconducting magnet, advanced plasma control for steady-state high performance operation could be expected.

  13. A new approach to beta-gamma coincidence counting. Advance report on the Samar electronic system; Informe preliminar del sistema Samar sistema automatico de medidas absolutas de Radionucleidos

    Energy Technology Data Exchange (ETDEWEB)

    Carlos, J. E. de; Granados, C. E.

    1972-07-01

    In 4{pi} {beta}-{gamma} coincidence measurements, precision on the evaluation of coincidence counting losses is made difficult because of complex overlapping effects between the{beta}--and {gamma}-side dead times due to pre cursive counted events. In this context the SAMAR electronic system is aimed to give a precise way of automatic counting and reduce the need for calculated corrections. This report describes its configuration and basic features. The SAMAR has been conceived in such a manner that both beta and gamma chains are sharing a common and non extending dead-time which is simultaneously applied to both channels. The shared dead time is made to be the only one inserted throughout the chains. Overlapping effects vanish and the three counting channels have identical transmission ratios. A new dead-time circuit based on fast linear gates as blocking elements has been developed. Application of the two-oscillator Muller's method evidences a fully non-extending character. Automatism is implemented by using a live timer corrective channel controlling the counting scalers. (Author) 21 refs.

  14. Constitutive high expression of chromosomal beta-lactamase in Pseudomonas aeruginosa caused by a new insertion sequence (IS1669) located in ampD

    DEFF Research Database (Denmark)

    Bagge, Niels; Ciofu, Oana; Hentzer, Morten

    2002-01-01

    The expression of chromosomal AmpC beta-lactamase in Pseudomonas aeruginosa is negatively regulated by the activity of an amidase, AmpD. In the present study we examined resistant clinical P. aeruginosa strains and several resistant variants isolated from in vivo and in vitro biofilms for mutations...... in the expression of high levels of AmpC beta-lactamase. Complementation of these isolates with ampD from the reference P. aeruginosa strain PAO1 caused a dramatic decrease in the expression of AmpC beta-lactamase and a parallel decrease of the MIC of ceftazidime to a level comparable to that of PAO1. One highly...... resistant, constitutive beta-lactamase-producing variant contained no mutations in ampD, but a point mutation was observed in ampR, resulting in an Asp-135-->Asn change. An identical mutation of AmpR in Enterobacter cloacae has been reported to cause a 450-fold higher AmpC expression. However, in many...

  15. Novel template-casting technique for fabricating beta-tricalcium phosphate scaffolds with high interconnectivity and mechanical strength and in vitro cell responses.

    Science.gov (United States)

    Liu, Yongxing; Kim, Joong-Hyun; Young, Daniel; Kim, Sungwoo; Nishimoto, Satoru K; Yang, Yunzhi

    2010-03-01

    A novel template-casting method was developed to produce completely interconnected, macroporous biodegradable beta-tricalcium phosphate (beta-TCP) scaffolds, whose architecture and chemistry can be fully manipulated by varying the templates and casting materials. The processing route includes preparation of beta-TCP slurry; casting and shaping into preformed templates comprised of paraffin beads; solidifying, drying; and sintering. Structural, chemical, and mechanical properties of the prepared macroporous scaffolds were characterized using micro computed tomography, scanning electron microscopy, x-ray diffractometry, Fourier transform infrared spectroscopy, and mechanical testing. Human embryonic palatal mesenchymal cells were used to evaluate cell proliferation within the scaffolds in vitro. The scaffolds consisted of interconnected macropores and solid struts, leading to a reticular network. Two groups of scaffolds with larger pores, approximately 600-800 microm and smaller pores approximately 350-500 microm, were demonstrated. The interconnected windows between neighboring macropores were 440 +/- 57 microm in diameter for the larger-pored scaffolds, and 330 +/- 50 microm for the smaller-pored scaffolds. The scaffolds were highly crystallized and composed dominantly of beta-tricalcium phosphate (beta-TCP) accompanied by minor phase of hydroxyapatite (HA). The hydroxyl group was clearly detected by FTIR on the scaffolds. High mechanical strength (9.3 MPa) was demonstrated by the completely interconnected scaffolds with approximately 79% porosity. The human embryonic palatal mesenchymal (HEPM) cells proliferated well on the smaller-pored and larger-pored scaffolds, exhibiting a significantly higher level of proliferation in the first 11 days of culture on the smaller pored scaffolds. High levels of differentiation were also evidenced in both pore sizes of scaffolds.

  16. Effects of sertraline on brain current source of the high beta frequency band: analysis of electroencephalography during audiovisual erotic stimulation in males with premature ejaculation.

    Science.gov (United States)

    Kwon, O Y; Kam, S C; Choi, J H; Do, J M; Hyun, J S

    2011-01-01

    To identify the effects of sertraline, a selective serotonin reuptake inhibitor, for the treatment of premature ejaculation (PE), changes in brain current-source density (CSD) of the high beta frequency band (22-30 Hz) induced by sertraline administration were investigated during audiovisual erotic stimulation. Eleven patients with PE (36.9±7.8 yrs) and 11 male volunteers (24.2±1.9 years) were enrolled. Scalp electroencephalography (EEG) was conducted twice: once before sertraline administration and then again 4 h after the administration of 50 mg sertraline. Statistical non-parametric maps were obtained using the EEG segments to detect the current-density differences in the high beta frequency bands (beta-3, 22-30 Hz) between the EEGs before and after sertraline administration in the patient group and between the patient group and controls after the administration of sertraline during the erotic video sessions. Comparing between before and after sertraline administration in the patients with PE, the CSD of the high beta frequency band at 4 h after sertraline administration increased significantly in both superior frontal gyri and the right medial frontal gyrus (P<0.01). The CSD of the beta-3 band of the patients with PE were less activated significantly in the middle and superior temporal gyrus, lingual and fusiform gyrus, inferior occipital gyrus and cuneus of the right cerebral hemisphere compared with the normal volunteers 4 h after sertraline administration (P<0.01). In conclusion, sertraline administration increased the CSD in both the superior frontal and right middle temporal gyrus in patients with PE. The results suggest that the increased neural activity in these particular cerebral regions after sertraline administration may be associated with inhibitory effects on ejaculation in patients with PE.

  17. ADX: A high Power Density, Advanced RF-Driven Divertor Test Tokamak for PMI studies

    Science.gov (United States)

    Whyte, Dennis; ADX Team

    2015-11-01

    The MIT PSFC and collaborators are proposing an advanced divertor experiment, ADX; a divertor test tokamak dedicated to address critical gaps in plasma-material interactions (PMI) science, and the world fusion research program, on the pathway to FNSF/DEMO. Basic ADX design features are motivated and discussed. In order to assess the widest range of advanced divertor concepts, a large fraction (>50%) of the toroidal field volume is purpose-built with innovative magnetic topology control and flexibility for assessing different surfaces, including liquids. ADX features high B-field (>6 Tesla) and high global power density (P/S ~ 1.5 MW/m2) in order to access the full range of parallel heat flux and divertor plasma pressures foreseen for reactors, while simultaneously assessing the effect of highly dissipative divertors on core plasma/pedestal. Various options for efficiently achieving high field are being assessed including the use of Alcator technology (cryogenic cooled copper) and high-temperature superconductors. The experimental platform would also explore advanced lower hybrid current drive and ion-cyclotron range of frequency actuators located at the high-field side; a location which is predicted to greatly reduce the PMI effects on the launcher while minimally perturbing the core plasma. The synergistic effects of high-field launchers with high total B on current and flow drive can thus be studied in reactor-relevant boundary plasmas.

  18. Core Principles and Test Item Development for Advanced High School and Introductory University Level Food Science

    Science.gov (United States)

    Laing-Kean, Claudine A. M.

    2010-01-01

    Programs supported by the Carl D. Perkins Act of 2006 are required to operate under the state or national content standards, and are expected to carry out evaluation procedures that address accountability. The Indiana high school course, "Advanced Life Science: Foods" ("ALS: Foods") operates under the auspices of the Perkins Act. However, no broad…

  19. A Phenomenological Exploration of Teacher Training Regarding Academically Advanced/High-Ability Students

    Science.gov (United States)

    Sueker, Carrie Olstad

    2011-01-01

    The needs of academically advanced/high-ability students may not be met in today's schools. When educational needs are not met, students may not reach full potential, may lose intrinsic motivation for learning, and may develop poor work and study habits. The rural school district involved in this study lacks a formal gifted and talented program.…

  20. Core Principles and Test Item Development for Advanced High School and Introductory University Level Food Science

    Science.gov (United States)

    Laing-Kean, Claudine A. M.

    2010-01-01

    Programs supported by the Carl D. Perkins Act of 2006 are required to operate under the state or national content standards, and are expected to carry out evaluation procedures that address accountability. The Indiana high school course, "Advanced Life Science: Foods" ("ALS: Foods") operates under the auspices of the Perkins…

  1. What is appropriate neoadjuvant/adjuvant androgen deprivation for high-risk/locally advanced prostate cancer?

    Institute of Scientific and Technical Information of China (English)

    Mikio Namiki; Hiroyuki Konaka

    2011-01-01

    @@ The majority of low-risk patients with clinically localized prostate cancer have a high likelihood of disease-free survival,regardless of the treatment option chosen.1 In contrast, patients with high-risk prostate cancer with high Gleason score, elevated prostate-specific antigen level and advanced clinical stage have a high probability of treatment failure after initial management by single-treatment modalities, such as radical pro-statectomy (RP), external beam radiation therapy (EBRT) or brachytherapy.2,3 Therefore, it is extremely important to establish the most effective treatment strategy for patients with high-risk prostate cancer.

  2. CONTROL OF MHD STABILITY IN DIII-D ADVANCED TOKAMAK DISCHARGES

    Energy Technology Data Exchange (ETDEWEB)

    STRAIT,EJ; BIALEK,J; CHANCE,MS; CHU,MS; EDGELL,DH; FERRON,JR; GREENFIELD,CM; GAROFALO,AM; HUMPHREYS,DA; JACKSON,GL; JAYAKUMAR,RJ; JERNIGAN,TC; KIM,JS; LA HAYE,RJ; LAO,LL; LUCE,TC; MAKOWSKI,MA; MURAKAMI,M; NAVRATIL,GA; OKABAYASHI,M; PETTY,CC; REIMERDES,H; SCOVILLE,JT; TURNBULL,AD; WADE,MR; WALKER,ML; WHYTE,DG; DIII-D TEAM

    2003-06-01

    OAK-B135 Advanced tokamak research in DIII-D seeks to optimize the tokamak approach for fusion energy production, leading to a compact, steady state power source. High power density implies operation at high toroidal beta, {beta}{sub T}=

    2{micro}{sub 0}/B{sub T}{sup 2}, since fusion power density increases roughly as the square of the plasma pressure. Steady-state operation with low recirculating power for current drive implies operation at high poloidal beta, {beta}{sub P} =

    2{micro}{sub 0}/{sup 2}, in order to maximize the fraction of self-generated bootstrap current. Together, these lead to a requirement of operation at high normalized beta, {beta}{sub N} = {beta}{sub T}(aB/I), since {beta}{sub P}{beta}{sub T} {approx} 25[(1+{kappa}{sup 2})/2] ({beta}{sub N}/100){sup 2}. Plasmas with high normalized beta are likely to operate near one or more stability limits, so control of MHD stability in such plasmas is crucial.

  3. Development of a low-energy and high-current pulsed neutral beam injector with a washer-gun plasma source for high-beta plasma experiments.

    Science.gov (United States)

    Ii, Toru; Gi, Keii; Umezawa, Toshiyuki; Asai, Tomohiko; Inomoto, Michiaki; Ono, Yasushi

    2012-08-01

    We have developed a novel and economical neutral-beam injection system by employing a washer-gun plasma source. It provides a low-cost and maintenance-free ion beam, thus eliminating the need for the filaments and water-cooling systems employed conventionally. In our primary experiments, the washer gun produced a source plasma with an electron temperature of approximately 5 eV and an electron density of 5 × 10(17) m(-3), i.e., conditions suitable for ion-beam extraction. The dependence of the extracted beam current on the acceleration voltage is consistent with space-charge current limitation, because the observed current density is almost proportional to the 3/2 power of the acceleration voltage below approximately 8 kV. By optimizing plasma formation, we successfully achieved beam extraction of up to 40 A at 15 kV and a pulse length in excess of 0.25 ms. Its low-voltage and high-current pulsed-beam properties enable us to apply this high-power neutral beam injection into a high-beta compact torus plasma characterized by a low magnetic field.

  4. HIGH-INTENSITY FOCUSED ULTRASOUND ABLATION OF PATIENTS WITH LOCALLY ADVANCED PROSTATE CANCER

    Directory of Open Access Journals (Sweden)

    L. V. Shaplygin

    2014-01-01

    Full Text Available In this study the results of retrospective analysis of treatment of 311 patients in Samara Oncology Center in 2008–2011 with locally advanced prostate cancer are presented. According to the received treatment patients were divided into 3 groups: 103 underwent HIFU, 101 patients had a course of EBRT, 107 patients received only hormone therapy (HT. Overall survival in patients with locally advanced prostate cancer after HIFU therapy was 86.2 %, after EBRT and HT – 66.3% and 18.1 %, respectively. These data indicate a high clinical efficacy of ultrasound ablation. 

  5. A high-resolution CMOS imaging detector for the search of neutrinoless double beta decay in $^{82}$Se

    CERN Document Server

    Chavarria, A E; Li, X; Rowlands, J A

    2016-01-01

    We introduce a new technology of detectors for the search of the neutrinoless double beta decay of $^{82}$Se. Based on the present literature, imaging devices from amorphous $^{82}$Se evaporated on a complementary metal-oxide-semiconductor (CMOS) active pixel array are expected to have the energy and spatial resolution to produce two-dimensional images of ionizing tracks of utmost quality, effectively akin to an electronic bubble chamber in the double beta decay energy regime. Still to be experimentally demonstrated, a detector consisting of a large array of these devices could have very low backgrounds, possibly reaching $10^{-7}$/(kg y) in the neutrinoless decay region of interest (ROI), as it may be required for the full exploration of the neutrinoless double beta decay parameter space in the most unfavorable condition of a strongly quenched nucleon axial coupling constant.

  6. Investigation of the Failure of Advanced High Strength Steels Heterogeneous Spot Welds

    OpenAIRE

    Thibaut Huin; Sylvain Dancette; Damien Fabrègue; Thomas Dupuy

    2016-01-01

    Nowadays, environmental regulation encourages carmakers to reduce the global vehicle weight. Steelmakers develop grades with high performance (Advanced High Strength Steels, AHSS) and fine steel sheet assemblies are used in car body structures, with an optimized thickness in each part. However, unusual fracture modes are sometimes observed during the mechanical tests of heterogeneous AHSS welds, made of dissimilar steel grades and sheet thicknesses. Weld fractures can occur with a strength lo...

  7. Type III Dyson Sphere of Highly Advanced Civilizations around a Super Massive Black Hole

    CERN Document Server

    Inoue, Makoto

    2011-01-01

    We describe a new system for a society of highly advanced civilizations around a super massive black hole (SMBH), as an advanced Type III "Dyson Sphere", pointing out an efficient usage of energy for the advanced civilizations. SMBH also works as a sink for waste materials. Here we assume that Type III civilisations of Kardashev classification [1] form a galactic club [2] in a galaxy, and the energy from the SMBH will be delivered to the club members, forming an energy control system similar to power grids in our present society. The energy is probably transmitted by a sharp beam with coherent electro-magnetic waves, which provide a new concept for the search for extraterrestrial intelligence (SETI) via detection of such energy transmission signals. This expands the search window for other intelligences within the Universe.

  8. Tensile and Spring-Back Behavior of DP600 Advanced High Strength Steel at Warm Temperatures

    Institute of Scientific and Technical Information of China (English)

    F Ozturk; S Toros; S Kilic

    2009-01-01

    In recent years, the use of advanced high strength steels in automotive industry has been increased remark-ably. Among advanced high strength steels, dual phase (DP)steels have gained a great attention owing to a combi-nation of high strength and good formability. However, high strength usually increases the spring-back behavior of the material, which creates problems for the parts during the assembly. Thus, the uniaxial tensile deformation and spring-back behaviors of DP600 advanced high strength steel were investigated in rolling (0°), diagonal (45°), and transverse (90°)directions in the temperature range from room temperature (RT)to 300 ℃. All tests were per-formed at a deformation speed of 25 mm/min. A V-shaped die (60°)was used for the spring-back measurements. The results indicated that the formability and spring-back of the material were decreased with increasing the tempera-tures. The material showed complex behaviors in different directions and at different temperatures.

  9. Where the girls aren't: High school girls and advanced placement physics enrollment

    Science.gov (United States)

    Barton, Susan O'brien

    During the high school years, when many students first have some choice in course selection, research indicates that girls choose to enroll in more math and science courses, take more advanced placement courses, and take more honors courses in English, biology, chemistry, mathematics, and foreign languages than ever before. Yet, not only are boys more likely to take all of the three core science courses (biology, chemistry, and physics), boys enroll in advanced placement physics approximately three times as often as do girls. This study examines the perceptions, attitudes, and aspirations of thirty high school girls enrolled in senior-level science electives in an attempt to understand their high school science course choices, and what factors were influencing them. This is a qualitative investigation employing constructivist grounded theory methods. There are two main contributions of this study. First, it presents a new conceptual and analytical framework to investigate the problem of why some high school girls do not enroll in physics coursework. This framework is grounded in the data and is comprised of three existing feminist perspectives along the liberal/radical continuum of feminist thought. Second, this study illuminates a complex set of reasons why participants avoided high school physics (particularly advanced placement physics) coursework. These reasons emerged as three broad categories related to: (a) a lack of connectedness with physics curriculum and instruction; (b) prior negative experiences with physics and math classroom climates; and (c) future academic goals and career aspirations. Taken together, the findings of this study indicate that the problem of high school girls and physics enrollment---particularly advanced placement physics enrollment---is a problem that cannot be evaluated or considered from one perspective.

  10. Recent technologic developments on high-resolution beta imaging systems for quantitative autoradiography and double labeling applications

    CERN Document Server

    Barthe, N; Chatti, K; Coulon, P; Maitrejean, S; 10.1016/j.nima.2004.03.014

    2004-01-01

    Two novel beta imaging systems, particularly interesting in the field of radiopharmacology and molecular biology research, were developed these last years. (1) a beta imager was derived from research conducted by Pr Charpak at CERN. This parallel plate avalanche chamber is a direct detection system of beta radioactivity, which is particularly adapted for qualitative and quantitative autoradiography. With this detector, autoradiographic techniques can be performed with emitters such as /sup 99m/Tc because this radionuclide emits many low-energy electrons and the detector has a very low sensitivity to low-range gamma -rays. Its sensitivity (smallest activity detected: 0.007 cpm/mm/sup 2/ for /sup 3/H and 0.01 for /sup 14/C), linearity (over a dynamic range of 10/sup 4/) and spatial resolution (50 mu m for /sup 3/H or /sup 99m/Tc to 150 mu m for /sup 32/P or /sup 18/F ( beta /sup +/)) gives a real interest to this system as a new imaging device. Its principle of detection is based on the analysis of light emitte...

  11. beta-Arrestin 1 and 2 stabilize the angiotensin II type I receptor in distinct high-affinity conformations

    DEFF Research Database (Denmark)

    Sanni, S J; Hansen, J T; Bonde, M M;

    2010-01-01

    The angiotensin II type 1 (AT(1)) receptor belongs to family A of 7 transmembrane (7TM) receptors. The receptor has important roles in the cardiovascular system and is commonly used as a drug target in cardiovascular diseases. Interaction of 7TM receptors with G proteins or beta-arrestins often...

  12. Failing beta-cell adaptation in South Asian families with a high risk of type 2 diabetes

    NARCIS (Netherlands)

    S. Jainandunsing (Sjaam); B. Özcan (Behiye); T. Rietveld (Trinet); J.N.I. van Miert (Joram); A.J. Isaacs (Aaron); J.G. Langendonk (Janneke); F.W.M. de Rooij (Felix); E.J.G. Sijbrands (Eric)

    2014-01-01

    textabstractWe performed an extended oral glucose tolerance test (OGTT) to investigate the relationship between early and late beta-cell response and type 2 diabetes (T2D) in families of South Asian origin and indigenous Dutch, burdened by T2D. Based on the OGTT, 22 individuals were normoglycemic, 1

  13. Orbital parameters, masses and distance to beta Centauri determined with the Sydney University Stellar Interferometer and high-resolution spectroscopy

    NARCIS (Netherlands)

    Davis, J.; Mendez, A.; Seneta, E.B.; Tango, W.J.; Booth, A.J.; O'Byrne, J.W.; Thorvaldson, E.D.; Ausseloos, M.; Aerts, C.C.; Uytterhoeven, K.

    2005-01-01

    The bright southern binary star beta Centauri (HR5267) has been observed with the Sydney University Stellar Interferometer (SUSI) and spectroscopically with the European Southern Observatory Coude Auxiliary Telescope and Swiss Euler telescope at La Silla. The interferometric observations have confir

  14. High-Temperature Structures, Adhesives, and Advanced Thermal Protection Materials for Next-Generation Aeroshell Design

    Science.gov (United States)

    Collins, Timothy J.; Congdon, William M.; Smeltzer, Stanley S.; Whitley, Karen S.

    2005-01-01

    The next generation of planetary exploration vehicles will rely heavily on robust aero-assist technologies, especially those that include aerocapture. This paper provides an overview of an ongoing development program, led by NASA Langley Research Center (LaRC) and aimed at introducing high-temperature structures, adhesives, and advanced thermal protection system (TPS) materials into the aeroshell design process. The purpose of this work is to demonstrate TPS materials that can withstand the higher heating rates of NASA's next generation planetary missions, and to validate high-temperature structures and adhesives that can reduce required TPS thickness and total aeroshell mass, thus allowing for larger science payloads. The effort described consists of parallel work in several advanced aeroshell technology areas. The areas of work include high-temperature adhesives, high-temperature composite materials, advanced ablator (TPS) materials, sub-scale demonstration test articles, and aeroshell modeling and analysis. The status of screening test results for a broad selection of available higher-temperature adhesives is presented. It appears that at least one (and perhaps a few) adhesives have working temperatures ranging from 315-400 C (600-750 F), and are suitable for TPS-to-structure bondline temperatures that are significantly above the traditional allowable of 250 C (482 F). The status of mechanical testing of advanced high-temperature composite materials is also summarized. To date, these tests indicate the potential for good material performance at temperatures of at least 600 F. Application of these materials and adhesives to aeroshell systems that incorporate advanced TPS materials may reduce aeroshell TPS mass by 15% - 30%. A brief outline is given of work scheduled for completion in 2006 that will include fabrication and testing of large panels and subscale aeroshell test articles at the Solar-Tower Test Facility located at Kirtland AFB and operated by Sandia

  15. Analysis of betaS and betaA genes in a Mexican population with African roots.

    Science.gov (United States)

    Magaña, María Teresa; Ongay, Zoyla; Tagle, Juan; Bentura, Gilberto; Cobián, José G; Perea, F Javier; Casas-Castañeda, Maricela; Sánchez-López, Yoaly J; Ibarra, Bertha

    2002-01-01

    To investigate the origin of the beta(A) and beta(S) genes in a Mexican population with African roots and a high frequency of hemoglobin S, we analyzed 467 individuals (288 unrelated) from different towns in the states of Guerrero and Oaxaca in the Costa Chica region. The frequency of the sickle-cell trait was 12.8%, which may represent a public health problem. The frequencies of the beta-haplotypes were determined from 350 nonrelated chromosomes (313 beta(A) and 37 beta(S)). We observed 15 different beta(A) haplotypes, the most common of which were haplotypes 1 (48.9%), 2 (13.4%), and 3 (13.4%). The calculation of pairwise distributions and Nei's genetic distance analysis using 32 worldwide populations showed that the beta(A) genes are more closely related to those of Mexican Mestizos and North Africans. Bantu and Benin haplotypes and haplotype 9 were related to the beta(S) genes, with frequencies of 78.8, 18.2, and 3.0%, respectively. Comparison of these haplotypes with 17 other populations revealed a high similitude with the population of the Central African Republic. These data suggest distinct origins for the beta(A) and beta(S) genes in Mexican individuals from the Costa Chica region.

  16. Signaling from beta1- and beta2-adrenergic receptors is defined by differential interactions with PDE4

    DEFF Research Database (Denmark)

    Richter, Wito; Day, Peter; Agrawal, Rani

    2008-01-01

    Beta1- and beta2-adrenergic receptors (betaARs) are highly homologous, yet they play clearly distinct roles in cardiac physiology and pathology. Myocyte contraction, for instance, is readily stimulated by beta1AR but not beta2AR signaling, and chronic stimulation of the two receptors has opposing...

  17. High-performance liquid chromatographic separation of carminic acid, alpha- and beta-bixin, and alpha- and beta-norbixin, and the determination of carminic acid in foods.

    Science.gov (United States)

    Lancaster, F E; Lawrence, J F

    1996-05-03

    During a study of natural food colours, a simple and reliable high-performance liquid chromatography system was developed for use with cochineal and annato. An isocratic mobile phase, consisting of methanol and 6% aqueous acetic acid, resolved bixin and norbixin, while a gradient system was used to separate carminic acid and the annato compounds. The carminic acid contents of cochineal extract, carmine and carmine hydrosoluble were determined using an isocratic mobile phase (40:60, v/v). The detection limit for carminic acid in the various products was approximately 100 ng/g. Carminic acid was determined quantitatively in fruit beverages, yogurt and candies. It was demonstrated that, because of decomposition, carminic acid was not suitable for use in candies when manufacturing temperatures above 100 degrees C were required. Most membrane filters are not suitable for use with cochineal solutions, but a cellulose membrane filter did not adsorb carminic acid and was used successfully to remove impurities from water-based cochineal products and food extracts containing carminic acid.

  18. Melatonin ameliorates high fat diet-induced diabetes and stimulates glycogen synthesis via a PKCzeta-Akt-GSK3beta pathway in hepatic cells.

    Science.gov (United States)

    Shieh, Jiunn-Min; Wu, Hung-Tsung; Cheng, Kai-Chun; Cheng, Juei-Tang

    2009-11-01

    Low levels of melatonin in circulation had been reported to be related to the development of diabetes. Melatonin administration in animals increases hepatic glycogen content to lower blood glucose. However, the signaling pathway for these effects is still unclear. The present study shows that intraperitoneal injection of 10 mg/kg melatonin ameliorated glucose utilization and insulin sensitivity in high fat diet-induced diabetic mice with an increase in hepatic glycogen and improvement in liver steatosis. We used HepG2 cells to investigate the signaling pathways for the melatonin-stimulated hepatic glycogen increment. Treatment of HepG2 cells with 1 nm melatonin markedly increased glycogen synthesis which was blocked by the melatonin receptor antagonist luzindole. In addition, melatonin increased the phosphorylation of subcellular signals at the level of protein kinase C zeta (PKCzeta), Akt, and glycogen synthase kinase 3beta (GSK3beta) while the increase in glycogen synthesis induced by melatonin was inhibited by PKCzeta pseudo-peptide. However, 3',5'-cyclic adenosine monophosphate-activated protein kinase (AMPK) was not influenced by melatonin treatment. Taken together, melatonin improves glucose intolerance and insulin resistance in high fat diet-induced diabetic mice and stimulates glycogen synthesis via a PKCzeta-Akt-GSK3beta pathway in HepG2 cells.

  19. Advanced Corrosion-Resistant Zr Alloys for High Burnup and Generation IV Applications

    Energy Technology Data Exchange (ETDEWEB)

    Arthur Motta; Yong Hwan Jeong; R.J. Comstock; G.S. Was; Y.S. Kim

    2006-10-31

    The objective of this collaboration between four institutions in the US and Korea is to demonstrate a technical basis for the improvement of the corrosion resistance of zirconium-based alloys in more extreme operating environments (such as those present in severe fuel duty,cycles (high burnup, boiling, aggressive chemistry) andto investigate the feasibility (from the point of view of corrosion rate) of using advanced zirconium-based alloys in a supercritical water environment.

  20. High Thermal Conductivity NARloy-Z-Diamond Composite Combustion Chamber Liner For Advanced Rocket Engines

    Science.gov (United States)

    Bhat, Biliyar N.; Ellis, David; Singh, Jogender

    2014-01-01

    Advanced high thermal conductivity materials research conducted at NASA Marshall Space Flight Center (MSFC) with state of the art combustion chamber liner material NARloy-Z showed that its thermal conductivity can be increased significantly by adding diamond particles and sintering it at high temperatures. For instance, NARloy-Z containing 40 vol. percent diamond particles, sintered at 975C to full density by using the Field assisted Sintering Technology (FAST) showed 69 percent higher thermal conductivity than baseline NARloy-Z. Furthermore, NARloy-Z-40vol. percent D is 30 percent lighter than NARloy-Z and hence the density normalized thermal conductivity is 140 percent better. These attributes will improve the performance and life of the advanced rocket engines significantly. By one estimate, increased thermal conductivity will directly translate into increased turbopump power up to 2X and increased chamber pressure for improved thrust and ISP, resulting in an expected 20 percent improvement in engine performance. Follow on research is now being conducted to demonstrate the benefits of this high thermal conductivity NARloy-Z-D composite for combustion chamber liner applications in advanced rocket engines. The work consists of a) Optimizing the chemistry and heat treatment for NARloy-Z-D composite, b) Developing design properties (thermal and mechanical) for the optimized NARloy-Z-D, c) Fabrication of net shape subscale combustion chamber liner, and d) Hot fire testing of the liner for performance. FAST is used for consolidating and sintering NARlo-Z-D. The subscale cylindrical liner with built in channels for coolant flow is also fabricated near net shape using the FAST process. The liner will be assembled into a test rig and hot fire tested in the MSFC test facility to determine performance. This paper describes the development of this novel high thermal conductivity NARloy-Z-D composite material, and the advanced net shape technology to fabricate the combustion

  1. Environmental Assessment for the Advanced Extremely High Frequency Satellite Beddown and Deployment Program

    Science.gov (United States)

    2010-07-01

    Fish and Wildlife Service Advanced Extremely High Frequency Satellite Final Environmental Assessment v VIF Vehicle Integration Facility WMO World...Vehicle Mate Operations Upon arrival on CCAFS, the transporter would take the encapsulated payload to the Vehicle Integration Facility ( VIF ), which...is located just south of LC-41 (Figure 2-2). At the VIF , the encapsulated payload would be mated to the Atlas V Launch Vehicle (LV) using a mobile

  2. Advanced thermoplastic composites: An attractive new material for usage in highly loaded vehicle components

    Energy Technology Data Exchange (ETDEWEB)

    Mehn, R.; Seidl, F.; Peis, R.; Heinzmann, D.; Frei, P. [BMW AG Muenchen (Germany)

    1995-10-01

    Beside the lightweight potential and further well known advantages of advanced composite materials, continuous fiber reinforced thermoplastics employed in vehicle structural parts especially offer short manufacturing cycle times and an additional economically viable manufacturing process. Presenting a frame structure concept for two highly loaded vehicle parts, a safety seat and a side door, numerous features concerning the choice of suitable composite materials, design aspects, investigations to develop a thermoforming technique, mature for a series production of vehicle parts, are discussed.

  3. Residual stress measurement with high energy x-rays at the Advanced Photon Source.

    Energy Technology Data Exchange (ETDEWEB)

    Winholtz, R. A.; Haeffner, D. R.; Green, R.E.L.; Varma, R.; Hammond, D.

    2000-03-02

    Preliminary measurements with high energy x-rays from the SRI CAT 1-ID beam line at the Advanced Photon show great promise for the measurement of stress and strain using diffraction. Comparisons are made with neutron measurements. Measurements of strains in a 2 mm thick 304 stainless steel weld show that excellent strain and spatial resolutions are possible. With 200 {micro}m slits, strain resolutions of 1 x 10{sup {minus}5} were achieved.

  4. Creep Strength of Dissimilar Welded Joints Using High B-9Cr Steel for Advanced USC Boiler

    Science.gov (United States)

    Tabuchi, Masaaki; Hongo, Hiromichi; Abe, Fujio

    2014-10-01

    The commercialization of a 973 K (700 °C) class pulverized coal power system, advanced ultra-supercritical (A-USC) pressure power generation, is the target of an ongoing research project initiated in Japan in 2008. In the A-USC boiler, Ni or Ni-Fe base alloys are used for high-temperature parts at 923 K to 973 K (650 °C to 700 °C), and advanced high-Cr ferritic steels are planned to be used at temperatures lower than 923 K (650 °C). In the dissimilar welds between Ni base alloys and high-Cr ferritic steels, Type IV failure in the heat-affected zone (HAZ) is a concern. Thus, the high B-9Cr steel developed at the National Institute for Materials Science, which has improved creep strength in weldments, is a candidate material for the Japanese A-USC boiler. In the present study, creep tests were conducted on the dissimilar welded joints between Ni base alloys and high B-9Cr steels. Microstructures and creep damage in the dissimilar welded joints were investigated. In the HAZ of the high B-9Cr steels, fine-grained microstructures were not formed and the grain size of the base metal was retained. Consequently, the creep rupture life of the dissimilar welded joints using high B-9Cr steel was 5 to 10 times longer than that of the conventional 9Cr steel welded joints at 923 K (650 °C).

  5. A high phase advance damped and detuned structure for the main linacs of CLIC

    CERN Document Server

    Khan, V.F.; Grudiev, A.; Jones, R.M.; Wuensch, W.

    2010-01-01

    The main accelerating structures for the CLIC are designed to operate at an average accelerating gradient of 100 MV/m. The accelerating frequency has been optimised to 11.994 GHz with a phase advance of 2π/3 [1] of the main accelerating mode. The moderately damped and detuned structure (DDS) design [2-3] is being studied as an alternative to the strongly damped WDS design [1]. Both these designs are based on the nominal accelerating phase advance. Here we explore high phase advance (HPA) structures in which the group velocity of the rf fields is reduced compared to that of standard (2π/3) structures. The electrical breakdown strongly depends on the fundamental mode group velocity. Hence it is expected that electrical breakdown is less likely to occur in the HPA structures. We report on a study of both the fundamental and dipole modes in a CLIC_DDS_ HPA structure, designed to operate at 5π/6 phase advance per cell. Higher order dipole modes in both the standard and HPA structures are also studied.

  6. Advanced weigh-in-motion system for weighing vehicles at high speed

    Energy Technology Data Exchange (ETDEWEB)

    Beshears, D.L.; Muhs, J.D.; Scudiere, M.B. [and others

    1998-02-01

    A state-of-the-art, Advanced Weigh-In-Motion (WIM) system has been designed, installed, and tested on the west bound side of Interstate I-75/I-40 near the Knox County Weigh Station. The project is a Cooperative Research and Development Agreement (CRADA) between Oak Ridge National Laboratory (ORNL) and International Road Dynamics, Inc. (IRD) sponsored by the Office of Uranium Programs, Facility and Technology Management Division of the Department of Energy under CRADA No. ORNL95-0364. ORNL, IRD, the Federal Highway Administration, the Tennessee Department of Safety and the Tennessee Department of Transportation have developed a National High Speed WIM Test Facility for test and evaluation of high-speed WIM systems. The WIM system under evaluation includes a Single Load Cell WIM scale system supplied and installed by IRD. ORNL developed a stand-alone, custom data acquisition system, which acquires the raw signals from IRD`s in-ground single load cell transducers. Under a separate contract with the Federal Highway Administration, ORNL designed and constructed a laboratory scale house for data collection, analysis and algorithm development. An initial advanced weight-determining algorithm has been developed. The new advanced WIM system provides improved accuracy and can reduce overall system variability by up to 30% over the existing high accuracy commercial WIM system.

  7. The Majorana Neutrinoless Double-Beta Decay Experiment

    CERN Document Server

    Guiseppe, V E

    2008-01-01

    Neutrinoless double-beta decay searches play a major role in determining the nature of neutrinos, the existence of a lepton violating process, and the effective Majorana neutrino mass. The Majorana Collaboration proposes to assemble an array of HPGe detectors to search for neutrinoless double-beta decay in Ge-76. Our proposed method uses the well-established technique of searching for neutrinoless double-beta decay in high purity Ge-diode radiation detectors that play both roles of source and detector. The technique is augmented with recent improvements in signal processing and detector design, and advances in controlling intrinsic and external backgrounds. Initially, Majorana aims to construct a prototype module containing 60 kg of Ge detectors to demonstrate the potential of a future 1-tonne experiment. The design and potential reach of this prototype Demonstrator module will be presented. This paper will also discuss detector optimization and low-background requirements, such as material purity, background...

  8. Boosted beta regression.

    Directory of Open Access Journals (Sweden)

    Matthias Schmid

    Full Text Available Regression analysis with a bounded outcome is a common problem in applied statistics. Typical examples include regression models for percentage outcomes and the analysis of ratings that are measured on a bounded scale. In this paper, we consider beta regression, which is a generalization of logit models to situations where the response is continuous on the interval (0,1. Consequently, beta regression is a convenient tool for analyzing percentage responses. The classical approach to fit a beta regression model is to use maximum likelihood estimation with subsequent AIC-based variable selection. As an alternative to this established - yet unstable - approach, we propose a new estimation technique called boosted beta regression. With boosted beta regression estimation and variable selection can be carried out simultaneously in a highly efficient way. Additionally, both the mean and the variance of a percentage response can be modeled using flexible nonlinear covariate effects. As a consequence, the new method accounts for common problems such as overdispersion and non-binomial variance structures.

  9. High-speed gas chromatography in doping control: fast-GC and fast-GC/MS determination of beta-adrenoceptor ligands and diuretics.

    Science.gov (United States)

    Brunelli, Claudio; Bicchi, Carlo; Di Stilo, Antonella; Salomone, Alberto; Vincenti, Marco

    2006-12-01

    In official doping controls, about 300 drugs and metabolites have to be screened for each sample. Moreover, the number of determinations to be routinely processed increases continuously as the number of both samples and potential illicit drugs keeps growing. As a consequence, increasingly specific, sensitive, and, above all, fast methods for doping controls are needed. The present study presents an efficient fast-GC/MS approach to the routine screening of two different classes of doping agents, namely beta-adrenoceptor ligands and diuretics (belonging to the S3, P2, and S5 groups of the WADA list of prohibited substances). Narrow bore columns (100 mm id) of different lengths and coated with apolar stationary phases were successfully used to separate the derivatized analytes; preliminary experiments (results not shown) showed better performances with OV-1701 for the separation of beta-adrenoceptor ligands. On the same stationary phase some diuretics required too high a temperature or a long isothermal time for elution, in which case a DB1-MS column was preferred. Two methods of sample preparation, derivatization, and analysis were used on aqueous standard mixtures of, respectively, (i) eight beta-adrenoceptor ligands, including five beta-antagonists (acebutolol, alprenolol, atenolol, metoprolol, pindolol) and three beta2-agonists (salbutamol, clenbuterol, terbutaline) and (ii) seventeen diuretic drugs (acetazolamide, althiazide, bendroflumethiazide, bumethanide, canrenone, chlorothiazide, chlortalidone, clopamide, ethacrinic acid, furosemide, hydrochlorothiazide, hydroflumethiazide, indapamide, indomethacine, spironolactone, triamterene, trichloromethiazide) and one masking agent (probenecid). The mixture of beta-adrenoceptor ligand derivatives was efficiently separated in about 5.6 min, while the one of 18 diuretics and masking agents required less than 5 min for analysis. Limits of detection were from 1 microg/L for pindolol, ethacrinic acid, furosemide

  10. High precision corrections to the neutron beta decay rate and electron asymmetry and current determination of V{sub ud}

    Energy Technology Data Exchange (ETDEWEB)

    GarcIa-Luna, J L [Departamento de Fisica, Centro Universitario de Ciencias Exactas e Ingenierias, Universidad de Guadalajara, Blvd. Marcelino GarcIa Barragan 1508, CP 44840, Guadalajara Jal. (Mexico); GarcIa, A [Departamento de Fisica, Centro de Investigacion y de Estudios Avanzados del IPN, Apartado Postal 14-740, 07000 Mexico, Distrito Federal (Mexico)

    2006-03-01

    The goal of the present analysis is to find, in the free neutron beta decay, the expressions for the decay rate and the electron asymmetry that contain all the theoretical effects at the 10{sup -4} level. This accuracy is better than the current experimental precision that modern experiments allow. For this aim it is necessary to study the strong interaction effects, the radiative corrections and the recoil of the proton. A conceptual problem that we discuss in detail is the Fermi function additivity. The model dependence in the radiative corrections yields important effects which must be incorporated. We show that this is the only source of uncertainty that is out of control still at the mentioned order. As an application, we compare the values of the CKM matrix element |V{sub ud} | from this decay with the values both from the superallowed Fermi transition beta decays and the unitarity of the CKM matrix. We discuss the relevance of the observed discrepancies.

  11. Research and Development of Some Advanced High Temperature Titanium Alloys for Aero-engine

    Directory of Open Access Journals (Sweden)

    CAI Jian-ming

    2016-08-01

    Full Text Available Some advanced high temperature titanium alloys are usually selected to be manufactured into blade, disc, case, blisk and bling under high temperature environment in compressor and turbine system of a new generation high thrust-mass ratio aero-engine. The latest research progress of 600℃ high temperature titanium alloy, fireproof titanium alloy, TiAl alloy, continuous SiC fiber reinforced titanium matrix composite and their application technology in recent years in China were reviewed in this paper. The key technologies need to be broken through in design, processing and application of new material and component are put forward, including industrial ingot composition of high purified and homogeneous control technology, preparation technology of the large size bar and special forgings, machining technology of blisk and bling parts, material property evaluation and application design technique. The future with the continuous application of advanced high temperature titanium alloys, will be a strong impetus to the development of China's aero-engine technology.

  12. Analysis of some metabolites of organic solvents in urine by high-performance liquid chromatography with beta-cyclodextrin.

    Science.gov (United States)

    Moon, D H; Paik, N W; Shim, Y B

    1997-07-04

    Chromatographic separation of the metabolites derived from toluene, ethylbenzene, styrene and xylene was carried out on untreated urine samples from factory workers. The elution sequence was as follows: phenylglyoxilic acid, 3-hydroxy-2-butanone, hippuric acid, o-methylhippuric acid, p-methylhippuric acid, m-methylhippuric acid, p-cresol, m-cresol and o-cresol. The stability constants (K(G)) of cresol and methylhippuric acid derivatives were evaluated. The capacity factor (k'), selectivity factor (alpha) and resolution (Rs) are described with a variety of mobile phases containing beta-cyclodextrin (beta-CD). The optimum concentration ratio of ethanol-water-acetic acid-beta-CD was determined to be 20:80:0.3:1.4%. Under these conditions, k' values of the five metabolites were 2

  13. Degradation of pharmaceutical beta-blockers by electrochemical advanced oxidation processes using a flow plant with a solar compound parabolic collector.

    Science.gov (United States)

    Isarain-Chávez, Eloy; Rodríguez, Rosa María; Cabot, Pere Lluís; Centellas, Francesc; Arias, Conchita; Garrido, José Antonio; Brillas, Enric

    2011-08-01

    The degradation of the beta-blockers atenolol, metoprolol tartrate and propranolol hydrochloride was studied by electro-Fenton (EF) and solar photoelectro-Fenton (SPEF). Solutions of 10 L of 100 mg L⁻¹ of total organic carbon of each drug in 0.1 M Na₂SO₄ with 0.5 mM Fe²⁺ of pH 3.0 were treated in a recirculation flow plant with an electrochemical reactor coupled with a solar compound parabolic collector. Single Pt/carbon felt (CF) and boron-doped diamond (BDD)/air-diffusion electrode (ADE) cells and combined Pt/ADE-Pt/CF and BDD/ADE-Pt/CF cells were used. SPEF treatments were more potent with the latter cell, yielding 95-97% mineralization with 100% of maximum current efficiency and energy consumptions of about 0.250 kWh g TOC⁻¹. However, the Pt/ADE-Pt/CF cell gave much lower energy consumptions of about 0.080 kWh g TOC⁻¹ with slightly lower mineralization of 88-93%, then being more useful for its possible application at industrial level. The EF method led to a poorer mineralization and was more potent using the combined cells by the additional production of hydroxyl radicals (•OH) from Fenton's reaction from the fast Fe²⁺ regeneration at the CF cathode. Organics were also more rapidly destroyed at BDD than at Pt anode. The decay kinetics of beta-blockers always followed a pseudo first-order reaction, although in SPEF, it was accelerated by the additional production of •OH from the action of UV light of solar irradiation. Aromatic intermediates were also destroyed by hydroxyl radicals. Ultimate carboxylic acids like oxalic and oxamic remained in the treated solutions by EF, but their Fe(III) complexes were photolyzed by solar irradiation in SPEF, thus explaining its higher oxidation power. NO₃⁻ was the predominant inorganic ion lost in EF, whereas the SPEF process favored the production of NH₄⁺ ion and volatile N-derivatives.

  14. Systems and methods for advanced ultra-high-performance InP solar cells

    Energy Technology Data Exchange (ETDEWEB)

    Wanlass, Mark

    2017-03-07

    Systems and Methods for Advanced Ultra-High-Performance InP Solar Cells are provided. In one embodiment, an InP photovoltaic device comprises: a p-n junction absorber layer comprising at least one InP layer; a front surface confinement layer; and a back surface confinement layer; wherein either the front surface confinement layer or the back surface confinement layer forms part of a High-Low (HL) doping architecture; and wherein either the front surface confinement layer or the back surface confinement layer forms part of a heterointerface system architecture.

  15. Advanced high brightness ion rf accelerator applications in the nuclear energy

    Energy Technology Data Exchange (ETDEWEB)

    Jameson, R.A.

    1991-01-01

    The capability of modern rf linear accelerators to provide intense high quality beams of protons, deuterons, or heavier ions is opening new possibilities for transmuting existing nuclear wastes, for generating electricity from readily available fuels with minimal residual wastes, for building intense neutron sources for materials research, for inertial confinement fusion using heavy ions, and for other new applications. These are briefly described, couched in a perspective of the advances in the understanding of the high brightness beams that has enabled these new programs. 32 refs., 2 figs.

  16. Planned High-brightness Channeling Radiation Experiment at Fermilab's Advanced Superconducting Test Accelerator

    Energy Technology Data Exchange (ETDEWEB)

    Blomberg, Ben [NICADD, DeKalb; Mihalcea, Daniel [NICADD, DeKalb; Panuganti, Harsha [NICADD, DeKalb; Piot, Philippe [Fermilab; Brau, Charles [Vanderbilt U.; Choi, Bo [Vanderbilt U.; Gabella, William [Vanderbilt U.; Ivanov, Borislav [Vanderbilt U.; Mendenhall, Marcus [Vanderbilt U.; Lynn, Christopher [Swarthmore Coll.; Sen, Tanaji [Fermilab; Wagner, Wolfgang [Forschungszentrum Dresden Rossendorf

    2014-07-01

    In this contribution we describe the technical details and experimental setup of our study aimed at producing high-brightness channeling radiation (CR) at Fermilab’s new user facility the Advanced Superconducting Test Accelerator (ASTA). In the ASTA photoinjector area electrons are accelerated up to 40-MeV and focused to a sub-micron spot on a ~40 micron thick carbon diamond, the electrons channel through the crystal and emit CR up to 80-KeV. Our study utilizes ASTA’s long pulse train capabilities and ability to preserve ultra-low emittance, to produce the desired high average brightness.

  17. Stabilized high-power laser system for the gravitational wave detector advanced LIGO.

    Science.gov (United States)

    Kwee, P; Bogan, C; Danzmann, K; Frede, M; Kim, H; King, P; Pöld, J; Puncken, O; Savage, R L; Seifert, F; Wessels, P; Winkelmann, L; Willke, B

    2012-05-07

    An ultra-stable, high-power cw Nd:YAG laser system, developed for the ground-based gravitational wave detector Advanced LIGO (Laser Interferometer Gravitational-Wave Observatory), was comprehensively characterized. Laser power, frequency, beam pointing and beam quality were simultaneously stabilized using different active and passive schemes. The output beam, the performance of the stabilization, and the cross-coupling between different stabilization feedback control loops were characterized and found to fulfill most design requirements. The employed stabilization schemes and the achieved performance are of relevance to many high-precision optical experiments.

  18. Recent advances in phosphate laser glasses for high power applications. Revision 1

    Energy Technology Data Exchange (ETDEWEB)

    Campbell, J.H.

    1996-05-01

    Recent advances in Nd-doped phosphate laser glasses for high-peak-power and high-average-power applications are reviewed. Compositional studies have progressed to the point that glasses can be tailored to have specific properties for specific applications. Non-radiative relaxation effects can be accurately modeled and empirical expressions have been developed to evaluate both intrinsic (structural) and extrinsic (contamination induced) relaxation effects. Losses due to surface scattering and bulk glass absorption have been carefully measured and can be accurately predicted. Improvements in processing have lead to high damage threshold (e.g. Pt inclusion free) and high thermal shock resistant glasses with improved edge claddings. High optical quality pieces up to 79 x 45 x 4 cm{sup 3} have been made and methods for continuous melting laser glass are under development.

  19. Highly potent HIV inhibition: engineering a key anti-HIV structure from PSC-RANTES into MIP-1 beta/CCL4.

    Science.gov (United States)

    Gaertner, Hubert; Lebeau, Olivier; Borlat, Irène; Cerini, Fabrice; Dufour, Brigitte; Kuenzi, Gabriel; Melotti, Astrid; Fish, Richard J; Offord, Robin; Springael, Jean-Yves; Parmentier, Marc; Hartley, Oliver

    2008-02-01

    The HIV coreceptor CCR5 is a validated target for both the prevention and therapy of HIV infection. PSC-RANTES, an N-terminally modified analogue of one of the natural chemokine ligands of CCR5 (RANTES/CCL5), is a potent inhibitor of HIV entry into target cells. Here, we set out to engineer the anti-HIV activity of PSC-RANTES into another natural CCR5 ligand (MIP-1beta/CCL4), by grafting into it the key N-terminal pharmacophore region from PSC-RANTES. We were able to identify MIP-1beta/CCL4 analogues that retain the receptor binding profile of MIP-1beta/CCL4, but acquire the very high anti-HIV potency and characteristic inhibitory mechanism of PSC-RANTES. Unexpectedly, we discovered that in addition to N-terminal structures from PSC-RANTES, the side chain of Lys33 is also necessary for full anti-HIV potency.

  20. Development of Advanced Thermal and Environmental Barrier Coatings Using a High-Heat-Flux Testing Approach

    Science.gov (United States)

    Zhu, Dongming; Miller, Robert A.

    2003-01-01

    The development of low conductivity, robust thermal and environmental barrier coatings requires advanced testing techniques that can accurately and effectively evaluate coating thermal conductivity and cyclic resistance at very high surface temperatures (up to 1700 C) under large thermal gradients. In this study, a laser high-heat-flux test approach is established for evaluating advanced low conductivity, high temperature capability thermal and environmental barrier coatings under the NASA Ultra Efficient Engine Technology (UEET) program. The test approach emphasizes the real-time monitoring and assessment of the coating thermal conductivity, which initially rises under the steady-state high temperature thermal gradient test due to coating sintering, and later drops under the cyclic thermal gradient test due to coating cracking/delamination. The coating system is then evaluated based on damage accumulation and failure after the combined steady-state and cyclic thermal gradient tests. The lattice and radiation thermal conductivity of advanced ceramic coatings can also be evaluated using laser heat-flux techniques. The external radiation resistance of the coating is assessed based on the measured specimen temperature response under a laser- heated intense radiation-flux source. The coating internal radiation contribution is investigated based on the measured apparent coating conductivity increases with the coating surface test temperature under large thermal gradient test conditions. Since an increased radiation contribution is observed at these very high surface test temperatures, by varying the laser heat-flux and coating average test temperature, the complex relation between the lattice and radiation conductivity as a function of surface and interface test temperature may be derived.

  1. Advances in EEG: home video telemetry, high frequency oscillations and electrical source imaging.

    Science.gov (United States)

    Patel, Anjla C; Thornton, Rachel C; Mitchell, Tejal N; Michell, Andrew W

    2016-10-01

    Over the last two decades, technological advances in electroencephalography (EEG) have allowed us to extend its clinical utility for the evaluation of patients with epilepsy. This article reviews three main areas in which substantial advances have been made in the diagnosis and pre-surgical planning of patients with epilepsy. Firstly, the development of small portable video-EEG systems have allowed some patients to record their attacks at home, thereby improving diagnosis, with consequent substantial healthcare and economic implications. Secondly, in specialist centres carrying out epilepsy surgery, there has been considerable interest in whether bursts of very high frequency EEG activity can help to determine the regions of the brain likely to be generating the seizures. Identification of these discharges, initially only recorded from intracranial electrodes, may thus allow better surgical planning and improve surgical outcomes. Finally we discuss the contribution of electrical source imaging in the pre-surgical evaluation of patients with focal epilepsy, and its prospects for the future.

  2. The Efficacy of High-Intensity Focused Ultrasound (HIFU) in Advanced Pancreatic Cancer

    Institute of Scientific and Technical Information of China (English)

    Bo Xie; Jiajun Ling; Weiming Zhang; Xueqin Huang; Jihua Zhen; Yanzhe Huang

    2008-01-01

    OBJECTIVE To observe the efficacy of high-intensity focused ultrasound (HIFU)in the treatment of late-stage pancreatic cancer.METHODS Sixteen patients with advanced pancreatic cancer received HIFU therapy.Evaluation of efficacy was made on the basis of changes in clinical symptoms and variations in the tumor echo and size.RESULTS Clinical symptoms such as pain were significantly alleviated,echo of the tumor was enhanced with B-US and the quality of life such as eating,sleeping and mental status was markedly improved;no serious complications were observed.CONCLUSION The use of HIFU in the treatment of advanced pancreatic cancer is feasible and safe.It is effective in killing the carcinoma cells and alleviaring pain.This technique may offer non-invasive therapy for the treatment of patients with late-stage pancreatic cancer.

  3. Advanced nanoscopic studies in magneto-electric manganites and high T$_c$ superconductors

    CERN Document Server

    Melo Mendonça, Tânia Manuela; Martins Correia, João Guilherme

    2012-05-01

    Technological advances in materials synthesis and the development of new experimental techniques have created a wealth of information with remarkable implications for understanding the macroscopic properties of systems with strongly correlated electronic properties. These advances allowed the observation of a wide range of exotic phenomena such as high T$_c$ superconductivity, colossal magneto-resistance or, more recently, multiferroic behavior, which are known to be strongly dependent on the nanoscale phenomenology. In fact, several experimental and theoretical studies demonstrated that strongly correlated electron systems are not homogeneous at a local scale due to simultaneously active spin, charge, lattice and/or orbital interactions. Consequently, these systems show nanoscale chemical and electronic disorder, which lead to a rich variety of macroscopic properties. It is under this scope that the nuclear hyperfine techniques are introduced, being particularly useful to infer the local lattice structure, e...

  4. Understanding advanced theory of mind and empathy in high-functioning adults with autism spectrum disorder.

    Science.gov (United States)

    Mathersul, Danielle; McDonald, Skye; Rushby, Jacqueline A

    2013-01-01

    It has been argued that higher functioning individuals with autism spectrum disorders (ASDs) have specific deficits in advanced but not simple theory of mind (ToM), yet the questionable ecological validity of some tasks reduces the strength of this assumption. The present study employed The Awareness of Social Inference Test (TASIT), which uses video vignettes to assess comprehension of subtle conversational inferences (sarcasm, lies/deception). Given the proposed relationships between advanced ToM and cognitive and affective empathy, these associations were also investigated. As expected, the high-functioning adults with ASDs demonstrated specific deficits in comprehending the beliefs, intentions, and meaning of nonliteral expressions. They also had significantly lower cognitive and affective empathy. Cognitive empathy was related to ToM and group membership whereas affective empathy was only related to group membership.

  5. High-grade glioma management and response assessment—recent advances and current challenges

    Science.gov (United States)

    Khan, M.N.; Sharma, A.M.; Pitz, M.; Loewen, S.K.; Quon, H.; Poulin, A.; Essig, M.

    2016-01-01

    The management of high-grade gliomas (hggs) is complex and ever-evolving. The standard of care for the treatment of hggs consists of surgery, chemotherapy, and radiotherapy. However, treatment options are influenced by multiple factors such as patient age and performance status, extent of tumour resection, biomarker profile, and tumour histology and grade. Follow-up cranial magnetic resonance imaging (mri) to differentiate treatment response from treatment effect can be challenging and affects clinical decision-making. An assortment of advanced radiologic techniques—including perfusion imaging with dynamic susceptibility contrast mri, dynamic contrast-enhanced mri, diffusion-weighted imaging, proton spectroscopy, mri subtraction imaging, and amino acid radiotracer imaging—can now incorporate novel physiologic data, providing new methods to help characterize tumour progression, pseudoprogression, and pseudoresponse. In the present review, we provide an overview of current treatment options for hgg and summarize recent advances and challenges in imaging technology. PMID:27536188

  6. High efficacy with deep nurse-administered propofol sedation for advanced gastroenterologic endoscopic procedures

    DEFF Research Database (Denmark)

    Jensen, Jeppe Thue; Hornslet, Pernille; Konge, Lars

    2016-01-01

    were included for evaluation. All but one procedure were completed with intermittent deep NAPS. The mean propofol dose was 397 mg (SD: 232.4) and the infusion rate was 23.9 mg/kg. The frequency of hypoxia was 4.3 % and 20 patients needed assisted ventilation (1.1 %). Anesthesiologic support...... was requested eight times (0.4 %). One patient was intubated due to suspected aspiration. CONCLUSIONS: Intermittent deep NAPS for advanced endoscopies in selected patients provided an almost 100 % success rate. However, the rate of hypoxia, hypotension and respiratory support was high compared with previously......) and Endoscopic Ultrasound (EUS) are available and potential benefits or hazards remain unclear. The aims of this study were to investigate the efficacy of intermittent deep sedation with propofol for a large cohort of advanced endoscopies and to provide data on the safety. PATIENTS AND METHODS: All available...

  7. Beta-Catenin and Epithelial Tumors: A Study Based on 374 Oropharyngeal Cancers

    Directory of Open Access Journals (Sweden)

    Angela Santoro

    2014-01-01

    Full Text Available Introduction. Although altered regulation of the Wnt pathway via beta-catenin is a frequent event in several human cancers, its potential implications in oral/oropharyngeal squamous cell carcinomas (OSCC/OPSCC are largely unexplored. Work purpose was to define association between beta-catenin expression and clinical-pathological parameters in 374 OSCCs/OP-SCCs by immunohistochemistry (IHC. Materials and Methods. Association between IHC detected patterns of protein expression and clinical-pathological parameters was assessed by statistical analysis and survival rates by Kaplan-Meier curves. Beta-catenin expression was also investigated in OSCC cell lines by Real-Time PCR. An additional analysis of the DNA content was performed on 22 representative OSCCs/OPSCCs by DNA-image-cytometric analysis. Results and Discussion. All carcinomas exhibited significant alterations of beta-catenin expression (P<0.05. Beta-catenin protein was mainly detected in the cytoplasm of cancerous cells and only focal nuclear positivity was observed. Higher cytoplasmic expression correlated significantly with poor histological differentiation, advanced stage, and worst patient outcome (P<0.05. By Real-Time PCR significant increase of beta-catenin mRNA was detected in OSCC cell lines and in 45% of surgical specimens. DNA ploidy study demonstrated high levels of aneuploidy in beta-catenin overexpressing carcinomas. Conclusions. This is the largest study reporting significant association between beta-catenin expression and clinical-pathological factors in patients with OSCCs/OPSCCs.

  8. Advances in coupled safety modeling using systems analysis and high-fidelity methods.

    Energy Technology Data Exchange (ETDEWEB)

    Fanning, T. H.; Thomas, J. W.; Nuclear Engineering Division

    2010-05-31

    The potential for a sodium-cooled fast reactor to survive severe accident initiators with no damage has been demonstrated through whole-plant testing in EBR-II and FFTF. Analysis of the observed natural protective mechanisms suggests that they would be characteristic of a broad range of sodium-cooled fast reactors utilizing metal fuel. However, in order to demonstrate the degree to which new, advanced sodium-cooled fast reactor designs will possess these desired safety features, accurate, high-fidelity, whole-plant dynamics safety simulations will be required. One of the objectives of the advanced safety-modeling component of the Reactor IPSC is to develop a science-based advanced safety simulation capability by utilizing existing safety simulation tools coupled with emerging high-fidelity modeling capabilities in a multi-resolution approach. As part of this integration, an existing whole-plant systems analysis code has been coupled with a high-fidelity computational fluid dynamics code to assess the impact of high-fidelity simulations on safety-related performance. With the coupled capabilities, it is possible to identify critical safety-related phenomenon in advanced reactor designs that cannot be resolved with existing tools. In this report, the impact of coupling is demonstrated by evaluating the conditions of outlet plenum thermal stratification during a protected loss of flow transient. Outlet plenum stratification was anticipated to alter core temperatures and flows predicted during natural circulation conditions. This effect was observed during the simulations. What was not anticipated, however, is the far-reaching impact that resolving thermal stratification has on the whole plant. The high temperatures predicted at the IHX inlet due to thermal stratification in the outlet plenum forces heat into the intermediate system to the point that it eventually becomes a source of heat for the primary system. The results also suggest that flow stagnation in the

  9. Compatibility of advanced tokamak plasma with high density and high radiation loss operation in JT-60U

    Science.gov (United States)

    Takenaga, H.; Asakura, N.; Kubo, H.; Higashijima, S.; Konoshima, S.; Nakano, T.; Oyama, N.; Porter, G. D.; Rognlien, T. D.; Rensink, M. E.; Ide, S.; Fujita, T.; Takizuka, T.; Kamada, Y.; Miura, Y.; JT-60 Team

    2005-12-01

    Compatibility of advanced tokamak plasmas with high density and high radiation loss has been investigated in both reversed shear (RS) plasmas and high βp H-mode plasmas with a weak positive shear on JT-60U. In the RS plasmas, the operating regime is extended to high density above the Greenwald density (nGW) with high confinement (HHy2 > 1) and high radiation loss fraction (frad > 0.9) by tailoring the internal transport barriers (ITBs). With a small plasma-wall gap, the radiation loss in the main plasma (inside the magnetic separatrix) reaches 80% of the heating power due to metal impurity accumulation. However, high confinement of HHy2 = 1.2 is sustained even with such a large radiation loss in the main plasma. By neon seeding, the divertor radiation loss is enhanced from 20% to 40% of the total radiation loss. In the high βp H-mode plasmas, high confinement (HHy2 = 0.96) is maintained at high density ( \\bar{n}_{\\rme}/n_GW=0.92 ) with high radiation loss fraction (frad ~ 1) by utilizing high-field-side pellets and argon (Ar) injection. The high \\bar{n}_{\\rme}/n_GW is attributed to the formation of strong density ITB. Strong core-edge parameter linkage for confinement improvement is observed, where the pedestal pressure and the core plasma confinement increase together. The measured radiation profile including contributions from all impurities in the main plasma is peaked, and the central radiation is ascribed to the contribution from Ar accumulated inside the ITB. Impurity transport analyses indicate that the Ar density profile, twice as peaked as the electron density profile, which is the same level as that observed in the high βp H-mode plasma, can yield an acceptable radiation profile even with a peaked density profile in a fusion reactor.

  10. Advances in Tumor Screening, Imaging, and Avatar Technologies for High-Grade Serous Ovarian Cancer

    Directory of Open Access Journals (Sweden)

    Anders eOhman

    2014-11-01

    Full Text Available The majority of high-grade serous ovarian carcinoma cases are detected in advanced stages when treatment options are limited. Surgery is less effective at eradicating the disease when it is widespread, resulting in high rates of disease relapse and chemoresistance. Current screening techniques are ineffective for early tumor detection and consequently, BRCA mutations carriers, with an increased risk for developing high-grade serous ovarian cancer, elect to undergo risk-reducing surgery. While prophylactic surgery is associated with a significant reduction in the risk of cancer development, it also results in surgical menopause and significant adverse side effects. The development of efficient early-stage screening protocols and imaging technologies is critical to improving the outcome and quality of life for current patients and women at increased risk. In addition, more accurate animal models are necessary in order to provide relevant in vivo testing systems and advance our understanding of the disease origin and progression. Moreover, both genetically engineered and tumor xenograft animal models enable the preclinical testing of novel imaging techniques and molecularly targeted therapies as they become available. Recent advances in xenograft technologies have made possible the creation of avatar mice, personalized tumorgrafts, which can be used as therapy testing surrogates for individual patients prior to or during treatment. High-grade serous ovarian cancer may be an ideal candidate for use with avatar models based on key characteristics of the tumorgraft platform. This review explores multiple strategies, including novel imaging and screening technologies in both patients and animal models, aimed at detecting cancer in the early stages and improving the disease prognosis.

  11. Phase I study of GC1008 (fresolimumab: a human anti-transforming growth factor-beta (TGFβ monoclonal antibody in patients with advanced malignant melanoma or renal cell carcinoma.

    Directory of Open Access Journals (Sweden)

    John C Morris

    Full Text Available BACKGROUND: In advanced cancers, transforming growth factor-beta (TGFβ promotes tumor growth and metastases and suppresses host antitumor immunity. GC1008 is a human anti-TGFβ monoclonal antibody that neutralizes all isoforms of TGFβ. Here, the safety and activity of GC1008 was evaluated in patients with advanced malignant melanoma and renal cell carcinoma. METHODS: In this multi-center phase I trial, cohorts of patients with previously treated malignant melanoma or renal cell carcinoma received intravenous GC1008 at 0.1, 0.3, 1, 3, 10, or 15 mg/kg on days 0, 28, 42, and 56. Patients achieving at least stable disease were eligible to receive Extended Treatment consisting of 4 doses of GC1008 every 2 weeks for up to 2 additional courses. Pharmacokinetic and exploratory biomarker assessments were performed. RESULTS: Twenty-nine patients, 28 with malignant melanoma and 1 with renal cell carcinoma, were enrolled and treated, 22 in the dose-escalation part and 7 in a safety cohort expansion. No dose-limiting toxicity was observed, and the maximum dose, 15 mg/kg, was determined to be safe. The development of reversible cutaneous keratoacanthomas/squamous-cell carcinomas (4 patients and hyperkeratosis was the major adverse event observed. One malignant melanoma patient achieved a partial response, and six had stable disease with a median progression-free survival of 24 weeks for these 7 patients (range, 16.4-44.4 weeks. CONCLUSIONS: GC1008 had no dose-limiting toxicity up to 15 mg/kg. In patients with advanced malignant melanoma and renal cell carcinoma, multiple doses of GC1008 demonstrated acceptable safety and preliminary evidence of antitumor activity, warranting further studies of single agent and combination treatments. TRIAL REGISTRATION: Clinicaltrials.gov NCT00356460.

  12. Advanced gasifier and water gas shift technologies for low cost coal conversion to high hydrogen syngas

    Energy Technology Data Exchange (ETDEWEB)

    Kramer, Andrew Kramer [Gas Technology Inst., Des Plaines, IL (United States)

    2016-09-30

    The Gas Technology Institute (GTI) and team members RTI International (RTI), Coanda Research and Development, and Nexant, are developing and maturing a portfolio of technologies to meet the United States Department of Energy (DOE) goals for lowering the cost of producing high hydrogen syngas from coal for use in carbon capture power and coal-to-liquids/chemicals. This project matured an advanced pilot-scale gasifier, with scalable and commercially traceable components, to readiness for use in a first-of-a-kind commercially-relevant demonstration plant on the scale of 500-1,000 tons per day (TPD). This was accomplished through cold flow simulation of the gasifier quench zone transition region at Coanda and through an extensive hotfire gasifier test program on highly reactive coal and high ash/high ash fusion temperature coals at GTI. RTI matured an advanced water gas shift process and catalyst to readiness for testing at pilot plant scale through catalyst development and testing, and development of a preliminary design basis for a pilot scale reactor demonstrating the catalyst. A techno-economic analysis was performed by Nexant to assess the potential benefits of the gasifier and catalyst technologies in the context of power production and methanol production. This analysis showed an 18%reduction in cost of power and a 19%reduction in cost of methanol relative to DOE reference baseline cases.

  13. Optimization of Process Parameters for High Efficiency Laser Forming of Advanced High Strength Steels within Metallurgical Constraints

    Science.gov (United States)

    Sheikholeslami, Ghazal; Griffiths, Jonathan; Dearden, Geoff; Edwardson, Stuart P.

    Laser forming (LF) has been shown to be a viable alternative to form automotive grade advanced high strength steels (AHSS). Due to their high strength, heat sensitivity and low conventional formability show early fractures, larger springback, batch-to-batch inconsistency and high tool wear. In this paper, optimisation of the LF process parameters has been conducted to further understand the impact of a surface heat treatment on DP1000. A FE numerical simulation has been developed to analyse the dynamic thermo-mechanical effects. This has been verified against empirical data. The goal of the optimisation has been to develop a usable process window for the LF of AHSS within strict metallurgical constraints. Results indicate it is possible to LF this material, however a complex relationship has been found between the generation and maintenance of hardness values in the heated zone. A laser surface hardening effect has been observed that could be beneficial to the efficiency of the process.

  14. Development of an advanced high-speed rotor - Final results from the Advanced Flight Research Rotor program

    Science.gov (United States)

    Jenks, Mark; Haslim, Leonard

    1988-01-01

    The final results of the Advanced Flight Research Rotor (AFRR) study, a NASA sponsored research program, are summarized. First, the results of the initial phase of the AFRR program, consisting of the definition of a conventional rotor with planform and prescribed twist distributions, are briefly reviewed. The mechanism of the calculated performance benefit is then explained, and a detailed analysis of the prescribed twist distribution is presented. Recommendations are made on the practical means of approximating the prescribed twist on the actual rotor.

  15. High-Purity Aluminum Magnet Technology for Advanced Space Transportation Systems

    Science.gov (United States)

    Goodrich, R. G.; Pullam, B.; Rickle, D.; Litchford, R. J.; Robertson, G. A.; Schmidt, D. D.; Cole, John (Technical Monitor)

    2001-01-01

    Basic research on advanced plasma-based propulsion systems is routinely focused on plasmadynamics, performance, and efficiency aspects while relegating the development of critical enabling technologies, such as flight-weight magnets, to follow-on development work. Unfortunately, the low technology readiness levels (TRLs) associated with critical enabling technologies tend to be perceived as an indicator of high technical risk, and this, in turn, hampers the acceptance of advanced system architectures for flight development. Consequently, there is growing recognition that applied research on the critical enabling technologies needs to be conducted hand in hand with basic research activities. The development of flight-weight magnet technology, for example, is one area of applied research having broad crosscutting applications to a number of advanced propulsion system architectures. Therefore, NASA Marshall Space Flight Center, Louisiana State University (LSU), and the National High Magnetic Field Laboratory (NHMFL) have initiated an applied research project aimed at advancing the TRL of flight-weight magnets. This Technical Publication reports on the group's initial effort to demonstrate the feasibility of cryogenic high-purity aluminum magnet technology and describes the design, construction, and testing of a 6-in-diameter by 12-in-long aluminum solenoid magnet. The coil was constructed in the machine shop of the Department of Physics and Astronomy at LSU and testing was conducted in NHMFL facilities at Florida State University and at Los Alamos National Laboratory. The solenoid magnet was first wound, reinforced, potted in high thermal conductivity epoxy, and bench tested in the LSU laboratories. A cryogenic container for operation at 77 K was also constructed and mated to the solenoid. The coil was then taken to NHMFL facilities in Tallahassee, FL. where its magnetoresistance was measured in a 77 K environment under steady magnetic fields as high as 10 T. In

  16. Phase transformations in the Zn-Al eutectoid alloy after quenching from the high temperature triclinic beta phase

    Energy Technology Data Exchange (ETDEWEB)

    Sandoval-Jimenez, A., E-mail: asandovalj@correo.unam.mx [Instituto Nacional de Investigaciones Nucleares, Dpto. de Aceleradores, Carretera Mexico-Toluca S/N, La Marquesa, Ocoyoacac, Mexico, C.P. 52750, ESIME, Unidad Culhuacan, Dpto. Ing. Mecanica, IPN (Mexico); Negrete, J. [Instituto de Metalurgia, Universidad Autonoma de San Luis Potosi, SLP 78210 (Mexico); Torres-Villasenor, G. [Instituto de Investigaciones en Materiales, Universidad Nacional Autonoma de Mexico, Apdo. Postal 70-360, Mexico D.F. 04510 (Mexico)

    2010-11-15

    Ribbons of the Zn-Al eutectoid alloy obtained by melt-spinning, were heat treated at 350 deg. C during 30 min in a free atmosphere furnace, and then quenched in liquid nitrogen. The temperature correspond to {beta} phase zone, which has a triclinic crystalline structure [1, 2]. Some evidence, obtained by X-ray diffraction, show that the structures present in the just quenched material are both close-packed hexagonal ({eta}-phase) and rhombohedral (R-phase). X-ray diffractograms taken in the same ribbons after annealed 500 h at room temperature, show that the R phase its transform to {alpha} and {eta} phases.

  17. Phantom bursting is highly sensitive to noise and unlikely to account for slow bursting in beta-cells

    DEFF Research Database (Denmark)

    Pedersen, Morten Gram

    2007-01-01

    Pancreatic beta-cells show bursting electrical activity with a wide range of burst periods ranging from a few seconds, often seen in isolated cells, over tens of seconds (medium bursting), usually observed in intact islets, to several minutes. The phantom burster model [Bertram, R., Previte, J...... and lowers the burst period dramatically in phantom bursters. It is therefore unlikely that slow bursting in single cells is driven by the slow phantom bursting mechanism, but could instead be driven by oscillations in glycolysis, which we show are stable to random ion channel fluctuations. Moreover, so...

  18. Structural analysis of advanced polymeric foams by means of high resolution X-ray computed tomography

    Science.gov (United States)

    Nacucchi, M.; De Pascalis, F.; Scatto, M.; Capodieci, L.; Albertoni, R.

    2016-06-01

    Advanced polymeric foams with enhanced thermal insulation and mechanical properties are used in a wide range of industrial applications. The properties of a foam strongly depend upon its cell structure. Traditionally, their microstructure has been studied using 2D imaging systems based on optical or electron microscopy, with the obvious disadvantage that only the surface of the sample can be analysed. To overcome this shortcoming, the adoption of X-ray micro-tomography imaging is here suggested to allow for a complete 3D, non-destructive analysis of advanced polymeric foams. Unlike metallic foams, the resolution of the reconstructed structural features is hampered by the low contrast in the images due to weak X-ray absorption in the polymer. In this work an advanced methodology based on high-resolution and low-contrast techniques is used to perform quantitative analyses on both closed and open cells foams. Local structural features of individual cells such as equivalent diameter, sphericity, anisotropy and orientation are statistically evaluated. In addition, thickness and length of the struts are determined, underlining the key role played by the achieved resolution. In perspective, the quantitative description of these structural features will be used to evaluate the results of in situ mechanical and thermal test on foam samples.

  19. Formability Analysis of Diode-Laser-Welded Tailored Blanks of Advanced High-Strength Steel Sheets

    Science.gov (United States)

    Panda, S. K.; Baltazar Hernandez, V. H.; Kuntz, M. L.; Zhou, Y.

    2009-08-01

    Currently, advances due to tailored blanking can be enhanced by the development of new grades of advanced high-strength steels (HSSs), for the further weight reduction and structural improvement of automotive components. In the present work, diode laser welds of three different grades of advanced high-strength dual-phase (DP) steel sheets (with tensile strengths of 980, 800, and 450 MPa) to high-strength low-alloy (HSLA) material were fabricated by applying the proper welding parameters. Formability in terms of Hecker’s limiting dome height (LDH), the strain distribution on the hemispherical dome surface, the weld line movement during deformation, and the load-bearing capacity during the stretch forming of these different laser-welded blanks were compared. Finite element (FE) analysis of the LDH tests of both the parent metals and laser-welded blanks was done using the commercially available software package LS-DYNA (Livermore Software Technology Corporation, Livermore, CA); the results compared well with the experimental data. It was also found that the LDH was not affected by the soft zone or weld zone properties; it decreased, however, with an increase in a nondimensional parameter, the “strength ratio” (SR). The weld line movement during stretch forming is an indication of nonuniform deformation resulting in a decrease in the LDH. In all the dissimilar weldments, fracture took place on the HSLA side, but the fracture location shifted to near the weld line (at the pole) in tailor-welded blanks (TWBs) of a higher strength ratio.

  20. Recent advances in nanobiotechnology and high-throughput molecular techniques for systems biomedicine.

    Science.gov (United States)

    Kim, Eung-Sam; Ahn, Eun Hyun; Chung, Euiheon; Kim, Deok-Ho

    2013-12-01

    Nanotechnology-based tools are beginning to emerge as promising platforms for quantitative high-throughput analysis of live cells and tissues. Despite unprecedented progress made over the last decade, a challenge still lies in integrating emerging nanotechnology-based tools into macroscopic biomedical apparatuses for practical purposes in biomedical sciences. In this review, we discuss the recent advances and limitations in the analysis and control of mechanical, biochemical, fluidic, and optical interactions in the interface areas of nanotechnologybased materials and living cells in both in vitro and in vivo settings.

  1. Properties of Galvanized and Galvannealed Advanced High Strength Hot Rolled Steels

    Energy Technology Data Exchange (ETDEWEB)

    V.Y. Guertsman; E. Essadiqi; S. Dionne; O. Dremmailova; R. Bouchard; B. Voyzelle; J. McDermid; R. Fourmentin

    2008-04-01

    The objectives of the project were (i) to develop the coating process information to achieve good quality coatings on 3 advanced high strength hot rolled steels while retaining target mechanical properties, (ii) to obtain precise knowledge of the behavior of these steels in the various forming operations and (iii) to establish accurate user property data in the coated conditions. Three steel substrates (HSLA, DP, TRIP) with compositions providing yield strengths in the range of 400-620 MPa were selected. Only HSLA steel was found to be suitable for galnaizing and galvannealing in the hot rolled condition.

  2. On Simulation of Edge Stretchability of an 800MPa Advanced High Strength Steel

    Science.gov (United States)

    Pathak, Nikky; Butcher, Cliff; Worswick, Michael

    2016-08-01

    In the present work, the edge stretchability of advanced high strength steel (AHSS) was investigated experimentally and numerically using both a hole expansion test and a tensile specimen with a central hole. The experimental fracture strains obtained using the hole expansion and hole tension test in both reamed and sheared edge conditions were in very good agreement, suggesting the tests are equivalent for fracture characterization. Isotropic finite-element simulations of both tests were performed to compare the stress-state near the hole edge.

  3. Nanocrystalline {beta}-sialon by reactive sintering of a SiO{sub 2}-AlN mixture subjected to high-energy ball milling

    Energy Technology Data Exchange (ETDEWEB)

    Tessier, P. [Groupe Minutia, Boucherville, Que. (Canada)]. E-mail: pascal.tessier@airliquide.com; Alamdari, H.D. [Groupe Minutia, Boucherville, Que. (Canada)]. E-mail: alamdari.houshang@nanoxnps.com; Dubuc, R. [Groupe Minutia, Boucherville, Que. (Canada); Boily, S. [Groupe Minutia, Boucherville, Que. (Canada)

    2005-04-05

    A mixture of powders of silica and aluminum nitride is subjected to high-energy ball milling for different milling times. This material is subsequently compacted by uniaxial pressing and sintered at 1450 deg. C. The resulting pellets are crushed and analysed by X-ray diffraction. For short milling times, the amount of phase transformation is minimal and the resulting material mostly consists of cristobalite and aluminum nitride. For long milling times, nanocrystalline {beta}-SiAl{sub 2}O{sub 2}N{sub 2} is mainly produced.

  4. Cerebrospinal Fluid Amyloid Beta and Tau Concentrations Are Not Modulated by 16 Weeks of Moderate- to High-Intensity Physical Exercise in Patients with Alzheimer Disease

    DEFF Research Database (Denmark)

    Jensen, Camilla Steen; Portelius, Erik; Siersma, Volkert

    2016-01-01

    Background: Physical exercise may have some effect on cognition in patients with Alzheimer disease (AD). However, the underlying biochemical effects are unclear. Animal studies have shown that amyloid beta (Aβ), one of the pathological hallmarks of AD, can be altered with high levels of physical...... of Life, Physical Health and Functional Ability in Alzheimer's Disease: The Effect of Physical Exercise (ADEX) study we analyzed cerebrospinal fluid samples for Aβ species, total tau (t-tau), phosphorylated tau (p-tau) and soluble amyloid precursor protein (sAPP) species. We also assessed the patients...

  5. RECENT ADVANCES IN HIGH TEMPERATURE ELECTROLYSIS AT IDAHO NATIONAL LABORATORY: STACK TESTS

    Energy Technology Data Exchange (ETDEWEB)

    X, Zhang; J. E. O' Brien; R. C. O' Brien; J. J. Hartvigsen; G. Tao; N. Petigny

    2012-07-01

    High temperature steam electrolysis is a promising technology for efficient sustainable large-scale hydrogen production. Solid oxide electrolysis cells (SOECs) are able to utilize high temperature heat and electric power from advanced high-temperature nuclear reactors or renewable sources to generate carbon-free hydrogen at large scale. However, long term durability of SOECs needs to be improved significantly before commercialization of this technology. A degradation rate of 1%/khr or lower is proposed as a threshold value for commercialization of this technology. Solid oxide electrolysis stack tests have been conducted at Idaho National Laboratory to demonstrate recent improvements in long-term durability of SOECs. Electrolytesupported and electrode-supported SOEC stacks were provided by Ceramatec Inc., Materials and Systems Research Inc. (MSRI), and Saint Gobain Advanced Materials (St. Gobain), respectively for these tests. Long-term durability tests were generally operated for a duration of 1000 hours or more. Stack tests based on technology developed at Ceramatec and MSRI have shown significant improvement in durability in the electrolysis mode. Long-term degradation rates of 3.2%/khr and 4.6%/khr were observed for MSRI and Ceramatec stacks, respectively. One recent Ceramatec stack even showed negative degradation (performance improvement) over 1900 hours of operation. A three-cell short stack provided by St. Gobain, however, showed rapid degradation in the electrolysis mode. Improvements on electrode materials, interconnect coatings, and electrolyteelectrode interface microstructures contribute to better durability of SOEC stacks.

  6. Microstructural effects on the springback of advanced high-strength steel

    Science.gov (United States)

    Gan, Wei; Babu, S. S.; Kapustka, Nick; Wagoner, Robert H.

    2006-11-01

    The application of advanced high-strength steels (AHSS) has been growing rapidly in the automotive industry. Because of their high-strength, thinner sheet metals can be used for body components to achieve both weight savings and increased safety. However, this will lead to greater springback deviation from design after the forming operation. Fundamental understanding and prediction of springback are required for springback compensation and tooling design. While various types of continuum mechanics based models have been proposed to simulate the mechanical behavior of advanced high-strength steels, few of them consider microstructural effects such as material heterogeneity. In this study, through sheet thickness strength variation has been observed in DP 780 and TRIP 780 steels. Finite-element simulation indicates that the through thickness effect (TTE) can have a significant impact on the springback behavior of these sheet metals. This is verified through our experimental work using draw-bend testing. The results suggest that microstructural effects should be considered to accurately simulate springback of AHSS. Based on these results, implications of different microstructural designs will be discussed.

  7. Measurements of Bauschinger effect and transient behavior of a quenched and partitioned advanced high strength steel

    Energy Technology Data Exchange (ETDEWEB)

    Zang, Shun-lai, E-mail: shawn@mail.xjtu.edu.cn [School of Mechanical Engineering, Xi' an Jiaotong University, No. 28, Xianning Road, Xi' an, Shaanxi (China); Sun, Li [Manufacturing Process Research, General Motors China Science Lab, No. 56, Jinwan Road, Shanghai (China); Niu, Chao [School of Mechanical Engineering, Xi' an Jiaotong University, No. 28, Xianning Road, Xi' an, Shaanxi (China)

    2013-12-01

    In recent decades, the needs for new advanced high strength steels (AHSS) with high ductility and strength have rapidly increased to achieve the targets of more fuel-efficient and safer vehicles in automotive industry. However, several undesirable phenomena are experimentally observed during the forming of such materials, particularly with complex loading and large plastic deformation. Springback is one of the most important problems that should be compensated in sheet metal forming process. In this paper, we investigated the hardening behavior of a Q and P (quench and partitioning) steel designated by QP980CR, which is a new third generation advance high strength steel, from the Baosteel Group Corp. in Shanghai, China. The uni-axial tensile and cyclic simple shear tests were conducted. The uni-axial tensile tests were performed on the specimens at 0°, 45° and 90° to rolling direction (RD). The flow stress and transverse strain evolution were obtained in view of the digital image correlation (DIC) measurement. The plastic anisotropy was optimized from the uni-axial tensile tests and thereafter incorporated into the simulations of cyclic simple shear tests. The cyclic simple shear tests were conducted with three prestrains to measure the Bauschinger effect, transient behavior and permanent softening, and to determine the material parameters of the combined isotropic-kinematic hardening model.

  8. High oestradiol concentration after ovarian stimulation is associated with lower maternal serum beta-HCG concentration and neonatal birth weight.

    Science.gov (United States)

    Liu, Suying; Kuang, Yanping; Wu, Yu; Feng, Yun; Lyu, Qifeng; Wang, Li; Sun, Yijuan; Sun, Xiaoxi

    2017-08-01

    In this retrospective study, the relationship between maternal serum oestradiol and progesterone levels after fresh embryo transfer or frozen embryo transfer (FET), and serum beta-HCG levels in early pregnancy and neonatal birth weight was examined. Included for analysis were 5643 conceived singletons: 2610 after FET and 3033 after fresh embryo transfer. Outcome measures included maternal serum oestradiol, progesterone, beta-HCG levels during the peri-implantation period, birth weight and small-for-gestational-age (SGA). Results at 4, 5 and 6 weeks' gestation were as follows: serum oestradiol and progesterone levels were significantly higher in women who underwent fresh embryo transfer compared with FET (all P HCG levels were significantly lower than in women who underwent FET (P HCG levels were negatively correlated with serum oestradiol; and birth weight was negatively correlated with serum oestradiol. Incidence of SGA in fresh embryo transfer was increased significantly compared with FET (P HCG in early pregnancy, lower birth weight and higher incidence of SGA. Copyright © 2017 Reproductive Healthcare Ltd. Published by Elsevier Ltd. All rights reserved.

  9. Advanced Computational Modeling of Vapor Deposition in a High-Pressure Reactor

    Science.gov (United States)

    Cardelino, Beatriz H.; Moore, Craig E.; McCall, Sonya D.; Cardelino, Carlos A.; Dietz, Nikolaus; Bachmann, Klaus

    2004-01-01

    In search of novel approaches to produce new materials for electro-optic technologies, advances have been achieved in the development of computer models for vapor deposition reactors in space. Numerical simulations are invaluable tools for costly and difficult processes, such as those experiments designed for high pressures and microgravity conditions. Indium nitride is a candidate compound for high-speed laser and photo diodes for optical communication system, as well as for semiconductor lasers operating into the blue and ultraviolet regions. But InN and other nitride compounds exhibit large thermal decomposition at its optimum growth temperature. In addition, epitaxy at lower temperatures and subatmospheric pressures incorporates indium droplets into the InN films. However, surface stabilization data indicate that InN could be grown at 900 K in high nitrogen pressures, and microgravity could provide laminar flow conditions. Numerical models for chemical vapor deposition have been developed, coupling complex chemical kinetics with fluid dynamic properties.

  10. High Energy Laboratory Astrophysics Experiments using electron beam ion traps and advanced light sources

    Science.gov (United States)

    Brown, Gregory V.; Beiersdorfer, Peter; Bernitt, Sven; Eberle, Sita; Hell, Natalie; Kilbourne, Caroline; Kelley, Rich; Leutenegger, Maurice; Porter, F. Scott; Rudolph, Jan; Steinbrugge, Rene; Traebert, Elmar; Crespo-Lopez-Urritia, Jose R.

    2015-08-01

    We have used the Lawrence Livermore National Laboratory's EBIT-I electron beam ion trap coupled with a NASA/GSFC microcalorimeter spectrometer instrument to systematically address problems found in the analysis of high resolution X-ray spectra from celestial sources, and to benchmark atomic physics codes employed by high resolution spectral modeling packages. Our results include laboratory measurements of transition energies, absolute and relative electron impact excitation cross sections, charge exchange cross sections, and dielectronic recombination resonance strengths. More recently, we have coupled to the Max-Plank Institute for Nuclear Physics-Heidelberg's FLASH-EBIT electron beam ion trap to third and fourth generation advanced light sources to measure photoexcitation and photoionization cross sections, as well as, natural line widths of X-ray transitions in highly charged iron ions. Selected results will be presented.

  11. Advances in 808nm high power diode laser bars and single emitters

    Science.gov (United States)

    Morales, J.; Lehkonen, S.; Liu, G.; Schleuning, D.; Acklin, B.

    2016-03-01

    Key applications for 780-830nm high power diode lasers include the pumping of various gas, solid state, and fiber laser media; medical and aesthetic applications including hair removal; direct diode materials processing; and computer-to-plate (CtP) printing. Many of these applications require high brightness fiber coupled beam delivery, in turn requiring high brightness optical output at the bar and chip level. Many require multiple bars per system, with aggregate powers on the order of kWs, placing a premium on high power and high power conversion efficiency. This paper presents Coherent's recent advances in the production of high power, high brightness, high efficiency bars and chips at 780-830nm. Results are presented for bars and single emitters of various geometries. Performance data is presented demonstrating peak power conversion efficiencies of 63% in CW mode. Reliability data is presented demonstrating <50k hours lifetime for products including 60W 18% fill factor and 80W 28% fill factor conduction cooled bars, and <1e9 shots lifetime for 500W QCW bars.

  12. A first attempt to bring computational biology into advanced high school biology classrooms.

    Directory of Open Access Journals (Sweden)

    Suzanne Renick Gallagher

    2011-10-01

    Full Text Available Computer science has become ubiquitous in many areas of biological research, yet most high school and even college students are unaware of this. As a result, many college biology majors graduate without adequate computational skills for contemporary fields of biology. The absence of a computational element in secondary school biology classrooms is of growing concern to the computational biology community and biology teachers who would like to acquaint their students with updated approaches in the discipline. We present a first attempt to correct this absence by introducing a computational biology element to teach genetic evolution into advanced biology classes in two local high schools. Our primary goal was to show students how computation is used in biology and why a basic understanding of computation is necessary for research in many fields of biology. This curriculum is intended to be taught by a computational biologist who has worked with a high school advanced biology teacher to adapt the unit for his/her classroom, but a motivated high school teacher comfortable with mathematics and computing may be able to teach this alone. In this paper, we present our curriculum, which takes into consideration the constraints of the required curriculum, and discuss our experiences teaching it. We describe the successes and challenges we encountered while bringing this unit to high school students, discuss how we addressed these challenges, and make suggestions for future versions of this curriculum.We believe that our curriculum can be a valuable seed for further development of computational activities aimed at high school biology students. Further, our experiences may be of value to others teaching computational biology at this level. Our curriculum can be obtained at http://ecsite.cs.colorado.edu/?page_id=149#biology or by contacting the authors.

  13. A first attempt to bring computational biology into advanced high school biology classrooms.

    Science.gov (United States)

    Gallagher, Suzanne Renick; Coon, William; Donley, Kristin; Scott, Abby; Goldberg, Debra S

    2011-10-01

    Computer science has become ubiquitous in many areas of biological research, yet most high school and even college students are unaware of this. As a result, many college biology majors graduate without adequate computational skills for contemporary fields of biology. The absence of a computational element in secondary school biology classrooms is of growing concern to the computational biology community and biology teachers who would like to acquaint their students with updated approaches in the discipline. We present a first attempt to correct this absence by introducing a computational biology element to teach genetic evolution into advanced biology classes in two local high schools. Our primary goal was to show students how computation is used in biology and why a basic understanding of computation is necessary for research in many fields of biology. This curriculum is intended to be taught by a computational biologist who has worked with a high school advanced biology teacher to adapt the unit for his/her classroom, but a motivated high school teacher comfortable with mathematics and computing may be able to teach this alone. In this paper, we present our curriculum, which takes into consideration the constraints of the required curriculum, and discuss our experiences teaching it. We describe the successes and challenges we encountered while bringing this unit to high school students, discuss how we addressed these challenges, and make suggestions for future versions of this curriculum.We believe that our curriculum can be a valuable seed for further development of computational activities aimed at high school biology students. Further, our experiences may be of value to others teaching computational biology at this level. Our curriculum can be obtained at http://ecsite.cs.colorado.edu/?page_id=149#biology or by contacting the authors.

  14. Beta-2-mikroglobulin ved medicinske sygdomme

    DEFF Research Database (Denmark)

    Hansen, P B; Olsen, Niels Vidiendal

    1989-01-01

    -beta 2M. beta 2M is a sensitive but non-specific parameter in inflammation and infection. Determination of beta 2M in saliva has been found to be of value in Sjögren's syndrome. In HIV-positive patients, a high serum-beta 2M level is a poor prognostic sign. Determinations of CSF-beta 2M in AIDS patients......-interstitial nephropathy, increased quantities of beta 2M are excreted in the urine. If the rate of glomerular filtration is reduced, serum-beta 2M is increased and this is also the case in persons with increased cell division despite normal renal function. Serum-beta 2M is, therefore, raised in numerous malignant...... must be presumed to be of value not only in the diagnosis of cerebral AIDS and other (latent) CNS infections but also to demonstrate complicating cerebral malignant lymphomata at an early stage....

  15. An improved chemo-enzymatic synthesis of 1-beta-O-acyl glucuronides: highly chemoselective enzymatic removal of protecting groups from corresponding methyl acetyl derivatives.

    Science.gov (United States)

    Baba, Akiko; Yoshioka, Tadao

    2007-12-07

    An improved and widely applicable chemo-enzymatic method for the synthesis of a series of 1-beta-O-acyl glucuronides 5a-f has been developed from the corresponding methyl acetyl derivatives 3a-f, which were stereospecifically synthesized from cesium salts of carboxylic acids 1a-f and methyl 2,3,4-tri-O-acetyl-1-bromo-1-deoxy-alpha-D-glucopyranuronate (2). Chemoselectivity of lipase AS Amano (LAS) in the hydrolytic removal of O-acetyl groups of 3a-f to provide methyl esters 4a-f was influenced by the nature of their 1-beta-O-acyl groups; high selectivity was evident only for 3b and 3f. Carboxylesterase from Streptomyces rochei (CSR), newly screened as an alternative to LAS, showed much greater chemoselectivity toward the O-acetyl groups than LAS; 3a, 3d, and 3e were chemoselectively hydrolyzed only by CSR. The combination of CSR with LAS yielded better results in the hydrolysis of 3c and 3f than did single usage of CSR. Final deprotection of the methyl ester groups of 4a-f to provide 5a-f was chemoselectively achieved by using lipase from Candida antarctica type B (CAL-B) as well as esterase from porcine liver (PLE), although CAL-B possessed higher chemoselectivity and catalytic efficiency than did PLE. CSR also exhibited high chemoselectivity in the synthesis of (S)-naproxen 1-beta-O-acyl glucopyranoside (7) from its 2,3,4,6-tetra-O-acetyl derivative 6.

  16. High risk factors of brain metastases in 295 patients with advanced breast cancer

    Institute of Scientific and Technical Information of China (English)

    YAN Min; L(U) Hui-min; LIU Zhen-zhen; LIU Hui; ZHANG Meng-wei; SUN Xi-bin; CUI Shu-de

    2013-01-01

    Background The incidence of brain metastases in patients with breast cancer is approximately 10%-16%,and survival after diagnosis of brain metastases is usually short.This study was designed to evaluate the risk factors associated with brain metastases in advanced breast cancer patients,with a view to help predict patient groups with high risk of brain metastases.Methods In total,295 patients with advanced breast cancer were evaluated.All patients were pathologically confirmed and metastatic lesions were confirmed pathologically or by imaging.All patients were examined at least once every 6 months with head CT or MRI.Patients showing symptoms underwent immediate inspection,and brain metastatic lesions were confirmed by head CT and/or MRI.Results At a median follow-up of 12 months from the occurrence of metastases,brain metastases had occurred in 49 patients (16.6%).In our univariate analysis,variables significantly related to increased risk of brain metastases were hormone receptor-negative tumors,epidermal growth factor receptor 2 (HER2)-positive tumors,and multiple distant metastases.Patients with dominant tumor sites in soft tissue,or defined as Luminal A subtype,tended to have a lower risk of brain metastases than patients with visceral metastases,Luminal B subtype,triple-negative subtype or HER2-enriched subtype tumors.Conclusions Our results strongly suggest that factors such as Luminal B,triple-negative,and HER2-enriched subtypes are high risk factors for brain metastases.These data,therefore,provide pivotal clinical evidence towards a comprehensive understanding of the risk factors of brain metastases in advanced breast cancer patients.

  17. Advanced biomass gasification for high-efficiency power. Final activity report of BiGPower Project

    Energy Technology Data Exchange (ETDEWEB)

    Kurkela, E.; Kurkela, M. (eds.)

    2009-11-15

    The BiGPower project was related to the development of 2nd generation high-efficiency biomass-to-electricity technologies, which have the potential to meet the targets of cost effective electricity production from wide range of biomass and waste fuels in size ranges typical to locally available feedstock sources (below 100 MW{sub e}). This project was designed to create the fundamental and technical basis for successful future industrial developments and demonstration projects aiming to commercial breakthrough by 2010-2020. This overall aim was approached by carrying out in pre-competitive manner well-focused R and D activities on the key bottlenecks of advanced biomass gasification power systems. Three promising European gasification technologies in this target size range were selected to form the basis for the development: 1) air-blow novel fixed-bed gasifier for size range of 0.5-5 MWe, 2) steam gasification in a dual-fluidisedbed gasifier for 5-50 MWe and 3) air-blown pressurised fluidised-bed gasification technology for 5-100 MWe. In all biomass gasification processes, the product gas contains several types of gas contaminants, which have to be efficiently removed before utilising the gas in advanced power systems. The key technical solutions developed in the BiGPower project were: a) high-temperature catalytic removal of tars and ammonia by new catalytic methods, and b) development of innovative low cost gas filtration. Three most potential power production cycle alternatives were examined and developed: 1) gas engines, 2) molten carbonate fuel cells (MCFC) and 3) the simplified Integrated Gasification Combined Cycle (IGCC) process. The performance and techno-economic feasibility of these advanced gasification-topower concepts were examined by carrying out case studies in different European Union. (orig.)

  18. An advanced distributed automated extraction of drainage network model on high-resolution DEM

    Science.gov (United States)

    Mao, Y.; Ye, A.; Xu, J.; Ma, F.; Deng, X.; Miao, C.; Gong, W.; Di, Z.

    2014-07-01

    A high-resolution and high-accuracy drainage network map is a prerequisite for simulating the water cycle in land surface hydrological models. The objective of this study was to develop a new automated extraction of drainage network model, which can get high-precision continuous drainage network on high-resolution DEM (Digital Elevation Model). The high-resolution DEM need too much computer resources to extract drainage network. The conventional GIS method often can not complete to calculate on high-resolution DEM of big basins, because the number of grids is too large. In order to decrease the computation time, an advanced distributed automated extraction of drainage network model (Adam) was proposed in the study. The Adam model has two features: (1) searching upward from outlet of basin instead of sink filling, (2) dividing sub-basins on low-resolution DEM, and then extracting drainage network on sub-basins of high-resolution DEM. The case study used elevation data of the Shuttle Radar Topography Mission (SRTM) at 3 arc-second resolution in Zhujiang River basin, China. The results show Adam model can dramatically reduce the computation time. The extracting drainage network was continuous and more accurate than HydroSHEDS (Hydrological data and maps based on Shuttle Elevation Derivatives at multiple Scales).

  19. Advanced mix-and-match using a high-NA i-line scanner

    Science.gov (United States)

    Kuijten, Jan P.; Harris, Thomas A.; van der Heijden, Ludo; Witko, David; Cossins, John; Foster, James; Ritchie, Douglas R.

    2000-07-01

    Step and Scan technology has matured for the current generation of semiconductor lithography tools and has become the standard for most new fabs and fab expansions. It is estimated that for the year 1999, more than 64 percent of new exposure tool shipments from all vendors were step and scan platforms. For economical mass production in sub 180 nm applications, DUV and i-line lithography have to be combined with critical layers that are exposure during DUV. Semi- critical and non-critical layers are exposed using i-line. The choice to use a stepper ora scanner for the i-line platform becomes critical in terms of operating cost and technical capability. This paper reports on the performance of high resolution, high throughput i-line scanners that are used in mix and match with DUV scanners. Advanced imaging capability is demonstrated on the ASML PAS 5500/400 i-line scanner as well as alignment performance on the most difficult layers using the ATHENA advanced alignment system. Matching strategies are presented along with a cost analysis showing the merits of using i-line scanners for semi- critical and non-critical layers in mix and match.

  20. Advances and Prospects in Breeding Japonica Rice for Super High Yield in the Northern China

    Institute of Scientific and Technical Information of China (English)

    CHEN Wen-fu; XU Zheng-jin; ZHANG Wen-zhong

    2007-01-01

    In this paper, advances and prospects in breeding japonica rice for super high yield in the northern China were analyzed comprehensively in terms of breeding theories, techniques and practices. The author holds that developing and spreading super rice is an important way to enhance the overall yielding ability of japonica rice and attaining immense expansion of rice production. After theories and technical guidelines for super rice breeding were formulated, which involved the creation of new plant morphology and strong hybrid vigor through crossing indica with japonica subspecies, the optimization of combination of desirable traits via multiple crossing or backcrossing, the assemblage of favorable genes and the integration of ideal plant morphology with the utilization of vigor-major breakthroughs have been made in conventional breeding of japonica super rice. A batch of new super rice varieties marked by superior rice quality and high disease resistance, such as Shennong 265, Shennong 606, and Jijing 88, etc., have been developed and released. In comparison with the advancement in conventional breeding of super rice, progress in hybrid japonica super rice breeding is slower because of climatic and ecological constraint in northern China. Therefore, solving the contradictions between vigor and growth duration, between yield and rice quality, and boosting vastly seed production are still serious challenges for breeders of hybrid japonica rice. Physiological and genetic problems in japonica super rice breeding are also discussed in this paper.

  1. Investigation on dissimilar laser welding of advanced high strength steel sheets for the automotive industry

    Energy Technology Data Exchange (ETDEWEB)

    Rossini, M., E-mail: matteo.rossini@unibz.it [Faculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Spena, P. Russo, E-mail: pasquale.russospena@unibz.it [Faculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Cortese, L., E-mail: luca.cortese@unibz.it [Faculty of Science and Technology, Free University of Bozen-Bolzano, Piazza Università 5, 39100 Bolzano (Italy); Matteis, P., E-mail: paolo.matteis@polito.it [Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy); Firrao, D., E-mail: donato.firrao@polito.it [Department of Applied Science and Technology, Politecnico di Torino, Corso Duca degli Abruzzi 24, 10129 Torino (Italy)

    2015-03-25

    To support the use of advanced high strength steels in car body design and fabrication, an investigation was carried out on dissimilar butt laser welding between TWinning Induced Plasticity (TWIP) steels, Dual Phase (DP) steels, hot stamping boron (22MnB5) steels, and TRansformation Induced Plasticity (TRIP) steels. The base materials and the weldments were fully characterized by means of metallography, microhardness, and tensile tests. Digital image analysis was also used to provide additional information on the local strain field in the joint during the tensile tests. Fractographic examination was finally performed on the fracture surfaces of the tensile samples. The dissimilar joints between the DP, 22MnB5, and TRIP steels exhibit good resistance properties. On the contrary, the dissimilar joints encompassing the TWIP steel exhibit poor mechanical strength and fail along the weld seam by intergranular fracture, probably due to presence of Mn segregations. Therefore, the laser welding of TWIP steel with other advanced high strength steels is not recommended without the use of proper metal fillers. Dissimilar laser welding of DP, TRIP and 22MnB5 combinations, on the contrary, can be a solution to assemble car body parts made of these steel grades.

  2. Influence of Manufacturing Processes and Microstructures on the Performance and Manufacturability of Advanced High Strength Steels

    Energy Technology Data Exchange (ETDEWEB)

    Choi, Kyoo Sil; Liu, Wenning N.; Sun, Xin; Khaleel, Mohammad A.

    2009-10-01

    Advanced high strength steels (AHSS) are performance-based steel grades and their global material properties can be achieved with various steel chemistries and manufacturing processes, leading to various microstructures. In this paper, we investigate the influence of supplier variation and resulting microstructure difference on the overall mechanical properties as well as local formability behaviors of advanced high strength steels (AHSS). For this purpose, we first examined the basic material properties and the transformation kinetics of TRansformation Induced Plasticity (TRIP) 800 steels from three different suppliers under different testing temperatures. The experimental results show that there is a significant supplier (i.e., manufacturing process) dependency of the TRIP 800 steel mechanical and microstructure properties. Next, we examined the local formability of two commercial Dual Phase (DP) 980 steels during stamping process. The two commercial DP 980 steels also exhibit noticeably different formability during stamping process in the sense that one of them shows severe tendency for shear fracture. Microstructure-based finite element analyses are carried out next to simulate the localized deformation process with the two DP 980 microstructures, and the results suggest that the possible reason for the difference in formability lies in the morphology of the hard martensite phase in the DP microstructure.

  3. A phase I/II trial of beta-(1,3/(1,6 D-glucan in the treatment of patients with advanced malignancies receiving chemotherapy

    Directory of Open Access Journals (Sweden)

    Weitberg Alan B

    2008-09-01

    Full Text Available Abstract β-(1,3/(1,6 D-glucan, a component of the fungal cell wall, has been shown to stimulate the immune system, enhance hematopoiesis, amplify killing of opsonized tumor cells and increase neutrophil chemotaxis and adhesion. In view of these attributes, the β-glucans should be studied for both their therapeutic efficacy in patients with cancer as well as an adjunctive therapy in patients receiving chemotherapy as a maneuver to limit suppression of hematopoiesis. In this study, twenty patients with advanced malignancies receiving chemotherapy were given a β-(1,3/(1,6 D-glucan preparation (MacroForce plus IP6, ImmuDyne, Inc. and monitored for tolerability and effect on hematopoiesis. Our results lead us to conclude that β-glucan is well-tolerated in cancer patients receiving chemotherapy, may have a beneficial effect on hematopoiesis in these patients and should be studied further, especially in patients with chronic lymphocytic leukemia and lymphoma.

  4. Semi-preparative separation of {alpha} and {beta}-amyrin by high performance liquid chromatographic; Separacao semipreparativa de {alpha} e {beta}-amirina por cromatografia liquida de alta eficiencia

    Energy Technology Data Exchange (ETDEWEB)

    Dias, Marluce Oliveira; Hamerski, Lidilhone; Pinto, Angelo C., E-mail: hamerski_1@hotmail.co [Universidade Federal do Rio de Janeiro (IQ/UFRJ), RJ (Brazil). Inst. de Quimica

    2011-07-01

    The resin obtained from species of the genus Protium (Burseraceae) is formed mostly of pentacyclic triterpenes: {alpha}-amyrin and {beta}-amyrin. The separation and purification of these triterpenes were optimized in three steps. (author)

  5. Monounsaturated fatty acids prevent the deleterious effects of palmitate and high glucose on human pancreatic beta-cell turnover and function

    OpenAIRE

    Maedler, Kathrin; Oberholzer, José; Bucher, Pascal Alain Robert; Spinas, Giatgen A.; Donath, Marc

    2003-01-01

    Glucotoxicity and lipotoxicity contribute to the impaired beta-cell function observed in type 2 diabetes. Here we examine the effect of saturated and monounsaturated fatty acids at different glucose concentrations on human beta-cell turnover and secretory function. Exposure of cultured human islets to saturated fatty acid and/or to an elevated glucose concentration for 4 days increased beta-cell DNA fragmentation and decreased beta-cell proliferation. In contrast, the monounsaturated palmitol...

  6. PIC Simulations of Continuously Driven Mirror and Ion Cyclotron Instabilities in High Beta Astrophysical and Heliospheric Plasmas

    CERN Document Server

    Riquelme, Mario; Verscharen, Daniel

    2014-01-01

    We use particle-in-cell (PIC) simulations to study the nonlinear evolution of ion velocity space instabilities in an idealized problem in which a background velocity shear continuously amplifies the magnetic field. We simulate the astrophysically relevant regime where the shear timescale is long compared to the ion cyclotron period, and the plasma beta is ~ 1-100. The background field amplification in our calculation is meant to mimic processes such as turbulent fluctuations or MHD-scale instabilities. The field amplification continuously drives a pressure anisotropy with the perpendicular pressure larger than the parallel pressure, and the plasma becomes unstable to the mirror and ion cyclotron instabilities. In all cases, the nonlinear state is dominated by the mirror instability, not the ion cyclotron instability, and the plasma pressure anisotropy saturates near the threshold for the linear mirror instability. The magnetic field fluctuations initially undergo exponential growth but saturate in a secular p...

  7. Inward particle transport at high collisionality in the Experimental Advanced Superconducting Tokamak

    Energy Technology Data Exchange (ETDEWEB)

    Wang, G. Q.; Ma, J. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China); Centre for Magnetic Fusion Theory, Chinese Academy of Sciences, Hefei 230031 (China); Weiland, J.; Zang, Q. [Institute of Plasma Physics, Chinese Academy of Sciences, Hefei 230031 (China)

    2013-10-15

    We have made the first drift wave study of particle transport in the Experimental Advanced Superconducting Tokamak (Wan et al., Nucl. Fusion 49, 104011 (2009)). The results reveal that collisions make the particle flux more inward in the high collisionality regime. This can be traced back to effects that are quadratic in the collision frequency. The particle pinch is due to electron trapping which is not very efficient in the high collisionality regime so the approach to equilibrium is slow. We have included also the electron temperature gradient (ETG) mode to give the right electron temperature gradient, since the Trapped Electron Mode (TE mode) is weak in this regime. However, at the ETG mode number ions are Boltzmann distributed so the ETG mode does not give particle transport.

  8. ADVANCED MR IMAGING METHODS FOR PLANNING AND MONITORING RADIATION THERAPY IN PATIENTS WITH HIGH GRADE GLIOMA

    Science.gov (United States)

    Lupo, Janine M.; Nelson, Sarah J.

    2016-01-01

    This review explores how the integration of advanced imaging methods with high quality anatomic images significantly improves the characterization, target definition, assessment of response to therapy, and overall management of patients with high-grade glioma. Metrics derived from diffusion, perfusion, and susceptibility weighted MR imaging in conjunction with MR spectroscopic imaging, allows us to characterize regions of edema, hypoxia, increased cellularity, and necrosis within heterogeneous tumor and surrounding brain tissue. Quantification of such measures may provide a more reliable initial representation of tumor delineation and response to therapy than changes in the contrast enhancing or T2 lesion alone and have a significant impact on targeting resection, planning radiation, and assessing treatment effectiveness. In the long-term, implementation of these imaging methodologies can also aid in the identification of recurrent tumor and its differentiation from treatment-related confounds and facilitate the detection of radiation-induced vascular injury in otherwise normal appearing brain tissue. PMID:25219809

  9. New tribo-systems for sheet metal forming of advanced high strength steels and stainless steels

    DEFF Research Database (Denmark)

    Ceron, Ermanno

    the reluctance of industry in the application of new solutions, due to the high trial costs. This project presents a new methodology for testing new environmentally friendly tribo-systems for sheet metal forming of advanced high strength steels and stainless steels. For the purpose, a new Universal Sheet......The environmental issue, concerning the lubrication in sheet metal forming, has become considerably important in the past 10 years. Besides the fact that legislation is becoming more restrictive on the type of lubricant industry is allowed to use, many companies are embracing the path of social...... responsibility and sustainability, which implies a careful application of environmentally friendly technology. On the other hand the global market requires more and more complex products, which ignites a chain reaction that affects the whole life cycle of the product. Regarding sheet metal forming, this means...

  10. The cryogenic cooling program in high-heat-load optics at the Advanced Photon Source

    Energy Technology Data Exchange (ETDEWEB)

    Rogers, C.S.

    1993-07-01

    This paper describes some of the aspects of the cryogenic optics program at the Advanced Photon Source (APS). A liquid-nitrogen-cooled, high-vacuum, double crystal monochromator is being fabricated at Argonne National Laboratory (ANL). A pumping system capable of delivering a variable flow rate of up to 10 gallons per minute of pressurized liquid nitrogen and removing 5 kilowatts of x-ray power is also being constructed. This specialized pumping system and monochromator will be used to test the viability of cryogenically cooled, high-heat-load synchrotron optics. It has been determined that heat transfer enhancement will be required for optics used with APS insertion devices. An analysis of a porous-matrix-enhanced monochromator crystal is presented. For the particular case investigated, a heat transfer enhancement factor of 5 to 6 was calculated.

  11. Daikin Advanced Lithium Ion Battery Technology – High Voltage Electrolyte - REVISED

    Energy Technology Data Exchange (ETDEWEB)

    Sunstrom, Joseph [Daikin America, Inc., Orangeburg, NY (United States); Hendershot, Ron E. [Daikin America, Inc., Orangeburg, NY (United States)

    2017-03-06

    An evaluation of high voltage electrolytes which contain fluorochemicals as solvents/additive has been completed with the objective of formulating a safe, stable electrolyte capable of operation to 4.6 V. Stable cycle performance has been demonstrated in LiNi1/3Mn1/3Co1/3O2 (NMC111)/graphite cells to 4.5 V. The ability to operate at high voltage results in significant energy density gain (>30%) which would manifest as longer battery life resulting in higher range for electric vehicles. Alternatively, a higher energy density battery can be made smaller without sacrificing existing energy. In addition, the fluorinated electrolytes examined showed better safety performance when tested in abuse conditions. The results are promising for future advanced battery development for vehicles as well as other applications.

  12. Materials Research Advances towards High-Capacity Battery/Fuel Cell Devices (Invited paper)

    Institute of Scientific and Technical Information of China (English)

    Wei-Dong He; Lu-Han Ye; Ke-Chun Wen; Ya-Chun Liang; Wei-Qiang Lv; Gao-Long Zhu; Kelvin H. L. Zhang

    2016-01-01

    The world has entered an era featured with fast transportations, instant communications, and prompt technological revolutions, the further advancement of which all relies fundamentally, yet, on the development of cost-effective energy resources allowing for durable and high-rate energy supply. Current battery and fuel cell systems are challenged by a few issues characterized either by insufficient energy capacity or by operation instability and, thus, are not ideal for such highly-demanded applications as electrical vehicles and portable electronic devices. In this mini-review, we present, from materials perspectives, a few selected important breakthroughs in energy resources employed in these applications. Prospectives are then given to look towards future research activities for seeking viable materials solutions for addressing the capacity, durability, and cost shortcomings associated with current battery/fuel cell devices.

  13. Advanced hybrid supercapacitor based on a mesoporous niobium pentoxide/carbon as high-performance anode.

    Science.gov (United States)

    Lim, Eunho; Kim, Haegyeom; Jo, Changshin; Chun, Jinyoung; Ku, Kyojin; Kim, Seongseop; Lee, Hyung Ik; Nam, In-Sik; Yoon, Songhun; Kang, Kisuk; Lee, Jinwoo

    2014-09-23

    Recently, hybrid supercapacitors (HSCs), which combine the use of battery and supercapacitor, have been extensively studied in order to satisfy increasing demands for large energy density and high power capability in energy-storage devices. For this purpose, the requirement for anode materials that provide enhanced charge storage sites (high capacity) and accommodate fast charge transport (high rate capability) has increased. Herein, therefore, a preparation of nanocomposite as anode material is presented and an advanced HSC using it is thoroughly analyzed. The HSC comprises a mesoporous Nb2O5/carbon (m-Nb2O5-C) nanocomposite anode synthesized by a simple one-pot method using a block copolymer assisted self-assembly and commercial activated carbon (MSP-20) cathode under organic electrolyte. The m-Nb2O5-C anode provides high specific capacity with outstanding rate performance and cyclability, mainly stemming from its enhanced pseudocapacitive behavior through introduction of a carbon-coated mesostructure within a voltage range from 3.0 to 1.1 V (vs Li/Li(+)). The HSC using the m-Nb2O5-C anode and MSP-20 cathode exhibits excellent energy and power densities (74 W h kg(-1) and 18,510 W kg(-1)), with advanced cycle life (capacity retention: ∼90% at 1000 mA g(-1) after 1000 cycles) within potential range from 1.0 to 3.5 V. In particular, we note that the highest power density (18,510 W kg(-1)) of HSC is achieved at 15 W h kg(-1), which is the highest level among similar HSC systems previously reported. With further study, the HSCs developed in this work could be a next-generation energy-storage device, bridging the performance gap between conventional batteries and supercapacitors.

  14. Electron capture and beta-decay rates for sd-shell nuclei in stellar environments relevant to high density O-Ne-Mg cores

    CERN Document Server

    Suzuki, Toshio; Nomoto, Ken'ichi

    2015-01-01

    Electron capture and beta-decay rates for nuclear pairs in sd-shell are evaluated at high densities and high temperatures relevant to the final evolution of electron-degenerate O-Ne-Mg cores of stars with the initial masses of 8-10 solar mass. Electron capture induces a rapid contraction of the electron-degenerate O-Ne-Mg core. The outcome of rapid contraction depends on the evolutionary changes in the central density and temperature, which are determined by the competing processes of contraction, cooling, and heating. The fate of the stars are determined by these competitions, whether they end up with electron-capture supernovae or Fe core-collapse supernovae. Since the competing processes are induced by electron capture and beta-decay, the accurate weak rates are crucially important. The rates are obtained for pairs with A=20, 23, 24, 25 and 27 by shell-model calculations in sd-shell with the USDB Hamiltonian. Effects of Coulomb corrections on the rates are evaluated. The rates for pairs with A=23 and 25 ar...

  15. Effect of Sertraline on Current-Source Distribution of the High Beta Frequency Band: Analysis of Electroencephalography under Audiovisual Erotic Stimuli in Healthy, Right-Handed Males.

    Science.gov (United States)

    Lee, Seung Hyun; Hyun, Jae Seog; Kwon, Oh-Young

    2010-08-01

    The purpose of this study was to examine the cerebral changes in high beta frequency oscillations (22-30 Hz) induced by sertraline and by audiovisual erotic stimuli in healthy adult males. Scalp electroencephalographies (EEGs) were conducted twice in 11 healthy, right-handed males, once before sertraline intake and again 4 hours thereafter. The EEGs included four sessions recorded sequentially while the subjects were resting, watching a music video, resting, and watching an erotic video for 3 minutes, 5 minutes, 3 minutes, and 5 minutes, respectively. We performed frequency-domain analysis using the EEGs with a distributed model of current-source analysis. The statistical nonparametric maps were obtained from the sessions of watching erotic and music videos (perotic stimuli decreased the current-source density of the high beta frequency band in the middle frontal gyrus, the precentral gyrus, the postcentral gyrus, and the supramarginal gyrus of the left cerebral hemisphere in the baseline EEGs taken before sertraline intake (perotic stimuli did not induce any changes in current-source distribution of the brain 4 hours after sertraline intake. It is speculated that erotic stimuli may decrease the function of the middle frontal gyrus, the precentral gyrus, the postcentral gyrus, and the supramarginal gyrus of the left cerebral hemisphere in healthy adult males. This change may debase the inhibitory control of the brain against erotic stimuli. Sertraline may reduce the decrement in inhibitory control.

  16. Developmental changes in antioxidant metabolites, enzymes, and pigments in fruit exocarp of four tomato (Lycopersicon esculentum Mill.) genotypes: beta-carotene, high pigment-1, ripening inhibitor, and 'Rutgers'.

    Science.gov (United States)

    Torres, C A; Andrews, P K

    2006-01-01

    In surface cell layers of fleshy fruit, antioxidants must limit photooxidative reactions that generate reactive oxygen species (ROS) in high light. Our objective was to measure changes in the concentrations of antioxidant metabolites and pigments, and the activities of enzymes of the Mehler-peroxidase, ascorbate-glutathione cycle in fruit exocarp tissue under non-stress conditions of the following fruit-specific tomato (Lycopersicon esculentum Mill.=Solanum lycopersicum) mutants and their parent: (1) beta-carotene (B), (2) high pigment (hp-1), (3) ripening inhibitor (rin), and (4) the nearly isogenic wild-type 'Rutgers'. Developmental variables included days after anthesis (DAA) and fruit surface color. The highest total ascorbic acid (AsA) concentration was in the exocarp of immature green fruit of hp-1, being 32% higher than 'Rutgers'. The hp-1 mutant also had the highest chlorophyll and total carotenoid concentrations, comprised mostly of lycopene in red ripe fruit; whereas, beta-carotene comprised 90% of the carotenoids in B. Although enzyme activities varied within genotype, they generally increased with development, then decreased as fruit maturity was reached, being coupled with AsA and glutathione (GSH) concentrations. In all mutants, dark-green (DG) exocarp had more chlorophyll and protein, higher concentrations of reduced AsA and GSH, and usually lower enzyme activities than light-green (LG) exocarp taken from the same fruit.

  17. Beta Thalassemia (For Parents)

    Science.gov (United States)

    ... Kids to Be Smart About Social Media Beta Thalassemia KidsHealth > For Parents > Beta Thalassemia Print A A ... Complications Symptoms Diagnosis Treatment en español Beta talasemia Thalassemias Thalassemias are a group of blood disorders that ...

  18. Improved preservation of residual beta cell function by atorvastatin in patients with recent onset type 1 diabetes and high CRP levels (DIATOR trial.

    Directory of Open Access Journals (Sweden)

    Alexander Strom

    Full Text Available BACKGROUND: A recent randomized placebo-controlled trial of the effect of atorvastatin treatment on the progression of newly diagnosed type 1 diabetes suggested a slower decline of residual beta cell function with statin treatment. Aim of this secondary analysis was to identify patient subgroups which differ in the decline of beta cell function during treatment with atorvastatin. METHODOLOGY/PRINCIPAL FINDINGS: The randomized placebo-controlled Diabetes and Atorvastatin (DIATOR Trial included 89 patients with newly diagnosed type 1 diabetes and detectable islet autoantibodies (mean age 30 years, 40% females, in 12 centers in Germany. Patients received placebo or 80 mg/d atorvastatin for 18 months. As primary outcome stimulated serum C-peptide levels were determined 90 min after a standardized liquid mixed meal. For this secondary analysis patients were stratified by single baseline characteristics which were considered to possibly be modified by atorvastatin treatment. Subgroups defined by age, sex or by baseline metabolic parameters like body mass index (BMI, total serum cholesterol or fasting C-peptide did not differ in C-peptide outcome after atorvastatin treatment. However, the subgroup defined by high (above median baseline C-reactive protein (CRP concentrations exhibited higher stimulated C-peptide secretion after statin treatment (p = 0.044. Individual baseline CRP levels correlated with C-peptide outcome in the statin group (r(2 = 0.3079, p<0.004. The subgroup with baseline CRP concentrations above median differed from the corresponding subgroup with lower CRP levels by higher median values of BMI, IL-6, IL-1RA, sICAM-1 and E-selectin. CONCLUSIONS/SIGNIFICANCE: Atorvastatin treatment may be effective in slowing the decline of beta cell function in a patient subgroup defined by above median levels of CRP and other inflammation associated immune mediators. TRIAL REGISTRATION: ClinicalTrials.gov NCT00974740.

  19. Advanced manufacturing technologies of large martensitic stainless steel castings with ultra low carbon and high cleanliness

    Directory of Open Access Journals (Sweden)

    Lou Yanchun

    2010-11-01

    Full Text Available The key manufacturing technologies associated with composition, microstructure, mechanical properties, casting quality and key process control for large martensitic stainless steel castings are involved in this paper. The achievements fully satisfied the technical requirements of the large 700 MW stainless steel hydraulic turbine runner for the Three Gorges Hydropower Station, and become the major technical support for the design and manufacture of the largest 700 MW hydraulic turbine generator unit in the world developed through our own efforts. The characteristics of a new high yield to tensile strength (Rp0.2/Rm ratio and high obdurability martensitic stainless steel with ultra low carbon and high cleanliness are also described. Over the next ten years, the large martensitic stainless steel castings and advanced manufacturing technologies will see a huge demand in clean energy industry such as nuclear power, hydraulic power at home and abroad. Therefore, the new high yield o tensile strength (Rp0.2/Rm ratio and high obdurability martensitic stainless steel materials, the fast and flexible manufacturing technologies of large size castings, and new environment friendly sustainable process will face new challenges and opportunities.

  20. Involvement of formyl peptide receptors in receptor for advanced glycation end products (RAGE - and amyloid beta 1-42-induced signal transduction in glial cells

    Directory of Open Access Journals (Sweden)

    Slowik Alexander

    2012-11-01

    Full Text Available Abstract Background Recent studies suggest that the chemotactic G-protein-coupled-receptor (GPCR formyl-peptide-receptor-like-1 (FPRL1 and the receptor-for-advanced-glycation-end-products (RAGE play an important role in the inflammatory response involved in neurodegenerative disorders such as Alzheimer’s disease (AD. Therefore, the expression and co-localisation of mouse formyl peptide receptor (mFPR 1 and 2 as well as RAGE in an APP/PS1 transgenic mouse model using immunofluorescence and real-time RT-PCR were analysed. The involvement of rat or human FPR1/FPRL1 (corresponds to mFPR1/2 and RAGE in amyloid-β 1–42 (Aβ1-42-induced signalling were investigated by extracellular signal regulated kinase 1/2 (ERK1/2 phosphorylation. Furthermore, the cAMP level in primary rat glial cells (microglia and astrocytes and transfected HEK 293 cells was measured. Formyl peptide receptors and RAGE were inhibited by a small synthetic antagonist WRW4 and an inactive receptor variant delta-RAGE, lacking the intracytoplasmatic domains. Results We demonstrated a strong increase of mFPR1/2 and RAGE expression in the cortex and hippocampus of APP/PS1 transgenic mice co-localised to the glial cells. In addition, the Aβ1-42-induced signal transduction is dependant on FPRL1, but also on FPR1. For the first time, we have shown a functional interaction between FPRL1/FPR1 and RAGE in RAGE ligands S100B- or AGE-mediated signalling by ERK1/2 phosphorylation and cAMP level measurement. In addition a possible physical interaction between FPRL1 as well as FPR1 and RAGE was shown with co-immunoprecipitation and fluorescence microscopy. Conclusions The results suggest that both formyl peptide receptors play an essential role in Aβ1-42-induced signal transduction in glial cells. The interaction with RAGE could explain the broad ligand spectrum of formyl peptide receptors and their important role for inflammation and the host defence against infections.