WorldWideScience

Sample records for high alkalinity water

  1. Electromembrane recycling of highly mineralized alkaline blowdown water from evaporative water treatment plants at thermal power stations

    Science.gov (United States)

    Chichirova, N. D.; Chichirov, A. A.; Lyapin, A. I.; Minibaev, A. I.; Silov, I. Yu.; Tolmachev, L. I.

    2016-12-01

    Thermal power stations (TPS) are the main source of highly mineralized effluents affecting the environment. An analysis of their water systems demonstrates that alkaline effluents prevail at TPSs. Extraction of an alkali from highly mineralized effluents can make the recycling of effluents economically feasible. A method is proposed of electromembrane recycling of liquid alkaline highly mineralized wastes from TPSs. The process includes electromembrane apparatuses of two types, namely, a diffusion dialysis extractor (DDE) intended for extraction of the alkali from a highly mineralized solution having a complex composition and an electrodialysis concentrator for increasing the concentration of the extracted solution to a value suitable for use in water treatment plants at TPSs. For implementation of the first process (i.e. the extraction of alkali from alkaline-salt solution) various membranes from various manufacturers were studied: CM-PAD and AM-PAD (Ralex, Czechia), MK-40, MA-40, MA-41, MA-414, and MB-2 (OOO OKhK "Shchekinoazot", Russia), AR103-QDF and CR61-CMP (Ionies Inc., USA). The experiments demonstrate that the acceptable degree of separation of the alkali and the salt is achieved in a pair of cation-exchange membranes with the efficiency of separation being higher without an electric field. The highest efficiency was attained with Russian-made membranes (MK-40, OOO OKhK "Shchekinoazot"). A full scale experiment on recycling of highly-mineralized blowdown water from the evaporating water treatment system at the Kazan cogeneration power station No. 3 (TETs-3) was performed in a pilot unit consisting of two electromembrane apparatuses made by UAB "Membraninės Technologijos LT". In the experiments every ton of blowdown water yielded 0.1 t of concentrated alkaline solution with an alkali content of up to 4 wt % and 0.9 t of the softened salt solution suitable for the reuse in the TPS cycle. The power rate is 6 kWh / ton of blowdown water.

  2. Enhanced coagulation for high alkalinity and micro-polluted water: the third way through coagulant optimization.

    Science.gov (United States)

    Yan, Mingquan; Wang, Dongsheng; Qu, Jiuhui; Ni, Jinren; Chow, Christopher W K

    2008-04-01

    Conventional coagulation is not an effective treatment option to remove natural organic matter (NOM) in water with high alkalinity/pH. For this type of water, enhanced coagulation is currently proposed as one of the available treatment options and is implemented by acidifying the raw water and applying increased doses of hydrolyzing coagulants. Both of these methods have some disadvantages such as increasing the corrosive tendency of water and increasing cost of treatment. In this paper, an improved version of enhanced coagulation through coagulant optimization to treat this kind of water is demonstrated. A novel coagulant, a composite polyaluminum chloride (HPAC), was developed with both the advantages of polyaluminum chloride (PACl) and the additive coagulant aids: PACl contains significant amounts of highly charged and stable polynuclear aluminum hydrolysis products, which is less affected by the pH of the raw water than traditional coagulants (alum and ferric salts); the additives can enhance both the charge neutralization and bridging abilities of PACl. HPAC exhibited 30% more efficiency than alum and ferric salts in dissolved organic carbon (DOC) removal and was very effective in turbidity removal. This result was confirmed by pilot-scale testing, where particles and organic matter were removed synergistically with HPAC as coagulant by sequential water treatment steps including pre-ozonation, coagulation, flotation and sand filtration.

  3. Water-free Alkaline Polymer-inorganic Acid Complexes with High Conductivity at Ambient Temperature

    Institute of Scientific and Technical Information of China (English)

    O.V.Chervakov; M.V.Andriianova; V.V.Riabenko; A.V.Markevich; E.M.Shembel; D.Meshri

    2007-01-01

    1 Results Recently increased interest is shown to proton conducting materials based on the alkaline polymer-inorganic acid complexes that is caused by a possibility of their application as the high-temperature electrolyte systems for various electrochemical devices (fuel cells,sensors,lithium power sources etc.).Complexes of inorganic acids with the alkaline polymers (polybenzimidazoles[1],polyvinylpyridines[2]) are characterized by high ionic conductivity at ambient temperatures (up to 10-2 Ω-1·cm-1) a...

  4. Anti-obesity effect of alkaline reduced water in high fat-fed obese mice.

    Science.gov (United States)

    Ignacio, Rosa Mistica Coles; Kang, Tae-Young; Kim, Cheol-Su; Kim, Soo-Ki; Yang, Young-Chul; Sohn, Joon-Hyung; Lee, Kyu-Jae

    2013-01-01

    Whether or not alkaline reduced water (ARW) has a positive effect on obesity is unclear. This study aims to prove the positive effect of ARW in high-fat (HF) diet-induced obesity (DIO) in C57BL/6 mice model. Toward this, obesity was induced by feeding the C57BL/6 male mice with high-fat diet (w/w 45% fat) for 12 weeks. Thereafter, the animals were administered with either ARW or tap water. Next, the degree of adiposity and DIO-associated parameters were assessed: clinico-pathological parameters, biochemical measurements, histopathological analysis of liver, the expression of cholesterol metabolism-related genes in the liver, and serum levels of adipokine and cytokine. We found that ARW-fed mice significantly ameliorated adiposity: controlled body weight gain, reduced the accumulation of epididymal fats and decreased liver fats as compared to control mice. Accordingly, ARW coordinated the level of adiponectin and leptin. Further, mRNA expression of cytochrome P450 (CYP)7A1 was upregulated. In summary, our data shows that ARW intake inhibits the progression of HF-DIO in mice. This is the first note on anti-obesity effect of ARW, clinically implying the safer fluid remedy for obesity control.

  5. Optimized coagulation of high alkalinity, low temperature and particle water: pH adjustment and polyelectrolytes as coagulant aids.

    Science.gov (United States)

    Yu, Jianfeng; Wang, Dongsheng; Yan, Mingquan; Ye, Changqing; Yang, Min; Ge, Xiaopeng

    2007-08-01

    The Yellow River in winter as source water is characterized as high alkalinity, low temperature and low particle concentrations, which have brought many difficulties to water treatment plants. This study fully examines the optimized coagulation process of the Yellow River by conventional and pre-polymerized metal coagulants, pH adjustment and polyelectrolytes as the primary coagulants or coagulant aids. For all the metal coagulants, polyaluminum chlorides are superior to traditional metal coagulants due to their stable polymeric species and low consumption of alkalinity. The removal of natural organic matter by monomeric metal coagulants can be improved through pH adjustment, which is in accordance with the higher concentration of polymeric species formed at corresponding pH value. With the addition of polyelectrolytes as coagulant aids, the coagulation performance is significantly improved. The effective removal of dissolved organic matter is consistent with high charge density, while molecular weight is relatively important for removing particles, which is consistent with polyelectrolytes as primary coagulants. These results suggest that the coagulation mechanisms in the removal of dissolved organic matter and particles are different, which may be exploited for optimized coagulation for the typical source water in practice.

  6. Alkaline Water and Longevity: A Murine Study.

    Science.gov (United States)

    Magro, Massimiliano; Corain, Livio; Ferro, Silvia; Baratella, Davide; Bonaiuto, Emanuela; Terzo, Milo; Corraducci, Vittorino; Salmaso, Luigi; Vianello, Fabio

    2016-01-01

    The biological effect of alkaline water consumption is object of controversy. The present paper presents a 3-year survival study on a population of 150 mice, and the data were analyzed with accelerated failure time (AFT) model. Starting from the second year of life, nonparametric survival plots suggest that mice watered with alkaline water showed a better survival than control mice. Interestingly, statistical analysis revealed that alkaline water provides higher longevity in terms of "deceleration aging factor" as it increases the survival functions when compared with control group; namely, animals belonging to the population treated with alkaline water resulted in a longer lifespan. Histological examination of mice kidneys, intestine, heart, liver, and brain revealed that no significant differences emerged among the three groups indicating that no specific pathology resulted correlated with the consumption of alkaline water. These results provide an informative and quantitative summary of survival data as a function of watering with alkaline water of long-lived mouse models.

  7. Optimization of Soilless Media for Alkaline Irrigation Water

    OpenAIRE

    Tramp, Cody Alexander; Chard, Julie K.; Bugbee, Bruce

    2009-01-01

    High root zone pH reduces nutrient availability and high alkalinity water is strongly buffered around an alkaline pH. Soilless media can be altered to improve nutrient availability. This study was conducted to optimize the composition of soilless media for use with high alkalinity water. Mixes of peat and/or perlite or vermiculite in 50/50 and 33/33/33 volumetric ratios were tested. In some studies, mixes were also amended with up to 2.4 g/L of dolomite limestone to neutralize the initial aci...

  8. High-resolution Imaging of pH in Alkaline Sediments and Water Based on a New Rapid Response Fluorescent Planar Optode.

    Science.gov (United States)

    Han, Chao; Yao, Lei; Xu, Di; Xie, Xianchuan; Zhang, Chaosheng

    2016-05-20

    A new dual-lumophore optical sensor combined with a robust RGB referencing method was developed for two-dimensional (2D) pH imaging in alkaline sediments and water. The pH sensor film consisted of a proton-permeable polymer (PVC) in which two dyes with different pH sensitivities and emission colors: (1) chloro phenyl imino propenyl aniline (CPIPA) and (2) the coumarin dye Macrolex(®) fluorescence yellow 10 GN (MFY-10 GN) were entrapped. Calibration experiments revealed the typical sigmoid function and temperature dependencies. This sensor featured high sensitivity and fast response over the alkaline working ranges from pH 7.5 to pH 10.5. Cross-sensitivity towards ionic strength (IS) was found to be negligible for freshwater when IS water associated with the photosynthesis of Vallisneria spiral species was also presented, suggesting that the sensor held great promise for the field applications.

  9. Advances in alkaline cooling water treatment technology: An update

    Energy Technology Data Exchange (ETDEWEB)

    Shaffer, A.E. Jr.; Klatskin, S.D.

    1985-01-01

    A series of chromate and non-chromate treatment programs, specifically designed for alkaline pH cooling waters, have been developed. The treatments provide excellent corrosion and scale control over a broad range of water chemistries and are applicable to high conductivity and iron contaminated waters. Low levels of zinc are used to reduce the dependency on alkalinity, chromate and calcium carbonate supersaturation for corrosion control. The precipitation and fouling problems previously encountered with zinc containing treatments have been eliminated by the use of polymeric dispersants.

  10. Hydrogen production by alkaline water electrolysis

    Directory of Open Access Journals (Sweden)

    Diogo M. F. Santos

    2013-01-01

    Full Text Available Water electrolysis is one of the simplest methods used for hydrogen production. It has the advantage of being able to produce hydrogen using only renewable energy. To expand the use of water electrolysis, it is mandatory to reduce energy consumption, cost, and maintenance of current electrolyzers, and, on the other hand, to increase their efficiency, durability, and safety. In this study, modern technologies for hydrogen production by water electrolysis have been investigated. In this article, the electrochemical fundamentals of alkaline water electrolysis are explained and the main process constraints (e.g., electrical, reaction, and transport are analyzed. The historical background of water electrolysis is described, different technologies are compared, and main research needs for the development of water electrolysis technologies are discussed.

  11. Short chain aliphatic acid anions in oil field waters and their contribution to the measured alkalinity

    Science.gov (United States)

    Willey, L.M.; Kharaka, Y.K.; Presser, T.S.; Rapp, J.B.; Barnes, I.

    1975-01-01

    High alkalinity values found in some formation waters from Kettleman North Dome oil field are due chiefly to acetate and propionate ions, with some contribution from higher molecular weight organic acid ions. Some of these waters contain no detectable bicarbonate alkalinity. For waters such as these, high supersaturation with respect to calcite will be incorrectly indicated by thermodynamic calculations based upon carbonate concentrations inferred from traditional alkalinity measurements. ?? 1975.

  12. Alkaline mineral water lowers bone resorption even in calcium sufficiency: alkaline mineral water and bone metabolism.

    Science.gov (United States)

    Wynn, Emma; Krieg, Marc-Antoine; Aeschlimann, Jean-Marc; Burckhardt, Peter

    2009-01-01

    Dietary acid charge enhances bone loss. Bicarbonate or alkali diet decreases bone resorption in humans. We compared the effect of an alkaline mineral water, rich in bicarbonate, with that of an acid one, rich in calcium only, on bone markers, in young women with a normal calcium intake. This study compared water A (per litre: 520 mg Ca, 291 mg HCO(3)(-), 1160 mg SO(4)(-), Potential Renal Acid load (PRAL) +9.2 mEq) with water B (per litre: 547 mg Ca, 2172 mg HCO(3)(-), 9 mg SO(4)(-), PRAL -11.2 mEq). 30 female dieticians aged 26.3 yrs (SD 7.3) were randomized into two groups, followed an identical weighed, balanced diet (965 mg Ca) and drank 1.5 l/d of the assigned water. Changes in blood and urine electrolytes, C-telopeptides (CTX), urinary pH and bicarbonate, and serum PTH were measured after 2 and 4 weeks. The two groups were not different at baseline, and showed a similar increase in urinary calcium excretion. Urinary pH and bicarbonate excretion increased with water B, but not with water A. PTH (p=0.022) and S-CTX (p=0.023) decreased with water B but not with water A. In calcium sufficiency, the acid calcium-rich water had no effect on bone resorption, while the alkaline water rich in bicarbonate led to a significant decrease of PTH and of S-CTX.

  13. High temperature and pressure alkaline electrolysis

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mogensen, Mogens Bjerg

    2013-01-01

    the operational temperature and pressure to produce pressurized hydrogen at high rate (m3 H2·h-1·m-2 cell area) and high electrical efficiency. This work describes an exploratory technical study of the possibility to produce hydrogen and oxygen with a new type of alkaline electrolysis cell at high temperatures...... for immobilization of aqueous KOH solutions. Electrolysis cells with this electrolyte and metal foam based gas diffusion electrodes were successfully demonstrated at temperatures up to 250 °C at 40 bar. Different electro-catalysts were tested in order to reduce the oxygen and hydrogen overpotentials. Current...

  14. High Temperature and Pressure Alkaline Electrolysis

    DEFF Research Database (Denmark)

    Allebrod, Frank

    and oxygen with a new type of alkaline electrolysis cell at high temperatures and pressures. To perform measurements under high pressure and at elevated temperatures it was necessary to build a measurement system around an autoclave which could stand high temperatures up to 250 °C and pressures up to 200 bar...... as well as extremely caustic environments. Based on a literature study to identify resistant materials for these conditions, Inconel 600 was selected among the metals which are available for autoclave construction. An initial single atmosphere high temperature and pressure measurement setup was build...... comprising this autoclave. A second high temperature and pressure measurement setup was build based on experiences from the first setup in order to perform automatized measurements. The conductivity of aqueous KOH at elevated temperatures and high concentrations was investigated using the van der Pauw method...

  15. Effects of alkalinity on ammonia removal, carbon dioxide stripping, and system pH in semi-commercial scale water recirculating aquaculture systems operated with moving bed bioreactors

    Science.gov (United States)

    When operating water recirculating systems (RAS) with high make-up water flushing rates in locations that have low alkalinity in the raw water, such as Norway, knowledge about the required RAS alkalinity concentration is important. Flushing RAS with make-up water containing low alkalinity washes out...

  16. Porous poly(perfluorosulfonic acid) membranes for alkaline water electrolysis

    DEFF Research Database (Denmark)

    Aili, David; Hansen, Martin Kalmar; Andreasen, Jens Wenzel;

    2015-01-01

    and washed out and the obtained porous materials allowed for swelling to reach water contents up to λ=85 [H2O] [−SO3K]−1. After equilibration in 22 wt% aqueous KOH, ion conductivity of 0.2 S cm−1 was recorded for this membrane type at room temperature, which is significantly higher than 0.01 S cm−1......Poly(perfluorosulfonic acid) (PFSA) is one of a few polymer types that combine excellent alkali resistance with extreme hydrophilicity. It is therefore of interest as a base material in separators for alkaline water electrolyzers. In the pristine form it, however, shows high cation selectivity....... To increase its ion conductivity in aqueous KOH, a method for the preparation of porous PFSA membranes was developed. It was based on an approach where PFSA was co-cast with poly(vinylpyrrolidone) (PVP) at different ratios to give transparent and colorless blend membranes. The PVP was subsequently dissolved...

  17. High temperature and pressure alkaline electrolysis

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mogensen, Mogens Bjerg

    2013-01-01

    and pressures. Two measurement systems were built to perform measurements under high pressures and at elevated temperatures of up to 95 bar and 250 °C, respectively. The conductivity of aqueous KOH and aqueous KOH immobilized in a porous SrTiO3 structure were investigated at elevated temperatures and high...... the operational temperature and pressure to produce pressurized hydrogen at high rate (m3 H2·h-1·m-2 cell area) and high electrical efficiency. This work describes an exploratory technical study of the possibility to produce hydrogen and oxygen with a new type of alkaline electrolysis cell at high temperatures...... concentrations of the electrolyte using the van der Pauw method in combination with electrochemical impedance spectroscopy (EIS). Conductivity values as high as 2.9 S cm-1 for 45 wt% KOH aqueous KOH and 0.84 S cm-1 for the immobilized KOH of the same concentration were measured at 200 °C. Porous SrTiO3 was used...

  18. [Risks associated with unrestricted consumption of alkaline-reduced water].

    Science.gov (United States)

    Henry, Marc; Chambron, Jacques

    2014-01-01

    Consumption of alkaline reduced water produced by domestic electrolysis devices was approved in Japan in 1965 by the Minister of Health, Work and Wellbeing, for the treatment of gastrointestinal disorders. Today, these devices are also freely available in France. The commercial information provided with the devices recommends the consumption of 1 to 1.5 liters per day, not only for gastrointestinal disorders but also for numerous other illnesses such as diabetes, cancer and inflammation. Academic research on this subject has been undergoing in Japan since 1990, and has established that the active ingredient is dissolved dihydrogen, which eliminates the free radical HO· in vivo. It has also been shown that electrode degradation during use of the devices releases highly reactive platinum nanoparticles, the toxicity of which is unknown. The authors of this report recommend alerting the French health authorities to the uncontrolled availability of these devices that generate drug substances and should therefore be subject to regulatory requirements.

  19. Sorption of water alkalinity and hardness from high-strength wastewater on bifunctional activated carbon: process optimization, kinetics and equilibrium studies.

    Science.gov (United States)

    Amosa, Mutiu K

    2016-08-01

    Sorption optimization and mechanism of hardness and alkalinity on bifunctional empty fruit bunch-based powdered activation carbon (PAC) were studied. The PAC possessed both high surface area and ion-exchange properties, and it was utilized in the treatment of biotreated palm oil mill effluent. Batch adsorption experiments designed with Design Expert(®) were conducted in correlating the singular and interactive effects of the three adsorption parameters: PAC dosage, agitation speed and contact time. The sorption trends of the two contaminants were sequentially assessed through a full factorial design with three factor interaction models and a central composite design with polynomial models of quadratic order. Analysis of variance revealed the significant factors on each design response with very high R(2) values indicating good agreement between model and experimental values. The optimum operating conditions of the two contaminants differed due to their different regions of operating interests, thus necessitating the utility of desirability factor to get consolidated optimum operation conditions. The equilibrium data for alkalinity and hardness sorption were better represented by the Langmuir isotherm, while the pseudo-second-order kinetic model described the adsorption rates and behavior better. It was concluded that chemisorption contributed majorly to the adsorption process.

  20. Hydrogen production by alkaline water electrolysis

    OpenAIRE

    Santos, Diogo M. F.; Sequeira,César A. C.; José L. Figueiredo

    2013-01-01

    Water electrolysis is one of the simplest methods used for hydrogen production. It has the advantage of being able to produce hydrogen using only renewable energy. To expand the use of water electrolysis, it is mandatory to reduce energy consumption, cost, and maintenance of current electrolyzers, and, on the other hand, to increase their efficiency, durability, and safety. In this study, modern technologies for hydrogen production by water electrolysis have been investigated. In this article...

  1. Microbial thiocyanate utilization under highly alkaline conditions.

    Science.gov (United States)

    Sorokin, D Y; Tourova, T P; Lysenko, A M; Kuenen, J G

    2001-02-01

    Three kinds of alkaliphilic bacteria able to utilize thiocyanate (CNS-) at pH 10 were found in highly alkaline soda lake sediments and soda soils. The first group included obligate heterotrophs that utilized thiocyanate as a nitrogen source while growing at pH 10 with acetate as carbon and energy sources. Most of the heterotrophic strains were able to oxidize sulfide and thiosulfate to tetrathionate. The second group included obligately autotrophic sulfur-oxidizing alkaliphiles which utilized thiocyanate nitrogen during growth with thiosulfate as the energy source. Genetic analysis demonstrated that both the heterotrophic and autotrophic alkaliphiles that utilized thiocyanate as a nitrogen source were related to the previously described sulfur-oxidizing alkaliphiles belonging to the gamma subdivision of the division Proteobacteria (the Halomonas group for the heterotrophs and the genus Thioalkalivibrio for autotrophs). The third group included obligately autotrophic sulfur-oxidizing alkaliphilic bacteria able to utilize thiocyanate as a sole source of energy. These bacteria could be enriched on mineral medium with thiocyanate at pH 10. Growth with thiocyanate was usually much slower than growth with thiosulfate, although the biomass yield on thiocyanate was higher. Of the four strains isolated, the three vibrio-shaped strains were genetically closely related to the previously described sulfur-oxidizing alkaliphiles belonging to the genus Thioalkalivibrio. The rod-shaped isolate differed from the other isolates by its ability to accumulate large amounts of elemental sulfur inside its cells and by its ability to oxidize carbon disulfide. Despite its low DNA homology with and substantial phenotypic differences from the vibrio-shaped strains, this isolate also belonged to the genus Thioalkalivibrio according to a phylogenetic analysis. The heterotrophic and autotrophic alkaliphiles that grew with thiocyanate as an N source possessed a relatively high level of cyanase

  2. Systemic and local effects of long-term exposure to alkaline drinking water in rats.

    Science.gov (United States)

    Merne, M E; Syrjänen, K J; Syrjänen, S M

    2001-08-01

    Alkaline conditions in the oral cavity may be caused by a variety of stimuli, including tobacco products, antacids, alkaline drinking water or bicarbonate toothpaste. The effects of alkaline pH on oral mucosa have not been systematically studied. To assess the systemic (organ) and local (oral mucosal) effects of alkalinity, drinking water supplemented with Ca(OH)2 or NaOH, with pH 11.2 or 12 was administered to rats (n = 36) for 52 weeks. Tissues were subjected to histopathological examination; oral mucosal biopsy samples were also subjected to immunohistochemical (IHC) analyses for pankeratin, CK19, CK5, CK4, PCNA, ICAM-1, CD44, CD68, S-100, HSP 60, HSP70, and HSP90. At completion of the study, animals in the study groups had lower body weights (up to 29% less) than controls despite equal food and water intake, suggesting a systemic response to the alkaline treatment. The lowest body weight was found in rats exposed to water with the highest pH value and starting the experiment when young (6 weeks). No histological changes attributable to alkaline exposure occurred in the oral mucosa or other tissues studied. Alkaline exposure did not affect cell proliferation in the oral epithelium, as shown by the equal expression of PCNA in groups. The up-regulation of HSP70 protein expression in the oral mucosa of rats exposed to alkaline water, especially Ca(OH)2 treated rats, may indicate a protective response. Intercellular adhesion molecule-1 (ICAM-1) positivity was lost in 6/12 rats treated with Ca(OH)2 with pH 11.2, and loss of CD44 expression was seen in 3/6 rats in both study groups exposed to alkaline water with pH 12. The results suggest that the oral mucosa in rats is resistant to the effects of highly alkaline drinking water. However, high alkalinity may have some unknown systemic effects leading to growth retardation, the cause of which remains to be determined.

  3. Perovskites As Electrocatalysts for Alkaline Water Electrolysis

    DEFF Research Database (Denmark)

    Nikiforov, Aleksey Valerievich; De La Osa Puebla, Ana Raquel; Jensen, Jens Oluf

    2014-01-01

    Water electrolysis is a promising technology for the production of hydrogen as a sustainable energy storage source, combined with solar or wind power. In this work various electrocatalysts for the Oxygen Evolution Reaction (OER) electrode were synthesized and characterized by several techniques s...

  4. Performance and Application of Corrosion Inhibitor TH-658B in High Hardness and High Alkalinity Water%新型高硬高碱水缓蚀阻垢剂TH-658B的应用性能

    Institute of Scientific and Technical Information of China (English)

    贺茂才; 齐晓婧; 高灿柱

    2012-01-01

    针对华北、西北等地补充水硬度、碱度高,浓缩后极易引起结垢和腐蚀的难题,开发了高硬、高碱水缓蚀阻垢剂TH-658B。采用静态阻碳酸钙垢试验、阻硫酸钙垢试验、梯度浓缩试验等研究了TH658B的性能。结果表明,相同的药剂浓度,TH-658B的碳酸钙阻垢率均高于ATMP和HEDP且TH-658B的碳酸钙和硫酸钙阻垢率均符合Q/SY126—2007要求;TH-658B可以使高硬、高碱水浓缩至钙硬总碱之和大于1500mg/L而不会导致系统结垢。此外,参照GB/T18175-2000,在TH-658B的存在下,高硬、高碱配水(〉1500mg/L)中的碳钢、不锈钢和铜的腐蚀速率分别为0.036、0.0018、0.0012mm/a,均符合GB50050—2007的要求。通过华北一电厂的现场应用,证明了TH-658B对高硬、高碱,特别是钙硬总碱之和达到1500mg/L以上的高浓缩倍率循环水系统具有良好的缓蚀和阻垢效果。%Aiming at the scaling and corrosion problem of high hardness and alkalinity water in north and northwest of China, a new type of scale and corrosion inhibitor TH-658B was developed. The performance of TH-658B was evaluated by means of scale inhibition test, gradient concentration test and rotary coupon corrosion test. The results show that the calcium carbonate scale inhibition rate of TH-658B was higher than ATMP and HEDP under the same concentration condition. The calcium carbonate and calcium sulfate scale inhibition rate of TH-658B can meet the standard requirements of Q/SY 126--2007. Gradient enrichment test results indicate that the summation of calcium hardness and total alkalinity could reach more than 1500 mg/L as TH-658B existed in water, which is much higher than the standard requirements of GBS0050- 2007. Furthermore, TH-658B has good inhibition corrosion performance for carbon steel, stainless steel and copper in high hardness and alkalinity water. The corrosion rates for carbon steel, stainless steel and

  5. Rapid changes in water hardness and alkalinity: Calcite formation is lethal to Daphnia magna.

    Science.gov (United States)

    Bogart, Sarah J; Woodman, Samuel; Steinkey, Dylan; Meays, Cindy; Pyle, Greg G

    2016-07-15

    There is growing concern that freshwater ecosystems may be negatively affected by ever-increasing anthropogenic inputs of extremely hard, highly alkaline effluent containing large quantities of Ca(2+), Mg(2+), CO3(2-), and HCO3(-) ions. In this study, the toxicity of rapid and extreme shifts in water hardness (38-600mg/L as CaCO3) and alkalinity (30-420mg/L as CaCO3) to Daphnia magna was tested, both independently and in combination. Within these ranges, where no precipitation event occurred, shifts in water hardness and/or alkalinity were not toxic to D. magna. In contrast, 98-100% of D. magna died within 96h after exposure to 600mg/L as CaCO3 water hardness and 420mg/L as CaCO3 alkalinity (LT50 of 60h with a 95% CI of 54.2-66.0h). In this treatment, a CaCO3 (calcite) precipitate formed in the water column which was ingested by and thoroughly coated the D. magna. Calcite collected from a mining impacted stream contained embedded organisms, suggesting field streams may also experience similar conditions and possibly increased mortality as observed in the lab tests. Although further investigation is required to determine the exact fate of aquatic organisms exposed to rapid calcite precipitation in the field, we caution that negative effects may occur more quickly or at lower concentrations of water hardness and alkalinity in which we observed effects in D. magna, because some species, such as aquatic insects, are more sensitive than cladocerans to changes in ionic strength. Our results provide evidence that both calcite precipitation and the major ion balance of waters should be managed in industrially affected ecosystems and we support the development of a hardness+alkalinity guideline for the protection of aquatic life.

  6. Development of a pressurized bipolar alkaline water electrolyzer

    Energy Technology Data Exchange (ETDEWEB)

    Neves Junior, Newton Pimenta; Pinto, Edgar A. de Godoi Rodrigues; Silva, Ennio Peres da; Rapelli, Rubia; Pinto, Cristiano da Silva [Universidade Estadual de Campinas (DFA/ IFGW/UNICAMP), SP (Brazil). Inst. de Fisica Gleb Wataghin. Dept. de Fisica Aplicada], Email: nevesjr@unicamp.br; Marin Neto, Antonio Jose; Lopes, Daniel Gabriel; Camargo, Joao Carlos; Ferreira, Paulo F.P. [Hydrogen Technology (HyTron), Campinas, SP (Brazil); Furlan, Andre Luis [Universidade Estadual de Campinas (DE/FEC/UNICAMP), SP (Brazil). Fac. de Engenharia Mecanica

    2010-07-01

    This paper reports the actual development status of a bipolar alkaline water electrolyzer with maximum production capacity of 1 m3/h of hydrogen and controlled by a PLC (Programmable Logic Controller), which also interfaces the electrolytic system with operators and other equipment, such as gas storage tanks, fuel cells and photovoltaic panels. The project also includes the construction of an electrolysis test bench to record electrical parameters (cathode, anode, separator and electrolyte potentials), the amount of produced gases and gas quality determined by gas chromatography. (author)

  7. Development of Hydrogen Electrodes for Alkaline Water Electrolysis

    DEFF Research Database (Denmark)

    Kjartansdóttir, Cecilía Kristín

    will be needed. Producing hydrogen via water electrolysis using surplus, low cost, power from renewables offers the possibility of increased production capacity and load management with no greenhouse emissions. Hydrogen is a valuable energy carrier, which is able to contribute to various forms of energy, such as......, production of electricity via fuel cells, fuel for internal combustion engines or gas turbines, or as a raw material for the production of synthetic fuels via Sabatier or Fischer - Tropsch process. In some situations it may be suitable to simply inject hydrogen into the existing natural gas based...... infrastructure. Alkaline water electrolysis (AWE) is the current standard (stat of the art) for industrial large-scale water electrolysis systems. One of the main criteria for industrial AWE is efficient and durable electrodes. The aim of the present PhD study was to develop electrode materials for hydrogen...

  8. Calcium aluminate cement hydration in a high alkalinity environment

    Directory of Open Access Journals (Sweden)

    Palomo, Á.

    2009-03-01

    Full Text Available The present paper forms part of a broader research project that aims primarily to devise new cementitious products via the alkali activation of silico-aluminous materials. This work addresses the possibility of using small percentages of calcium aluminate cement (CAC as a source of reactive aluminium. For this reason, a preliminary review was needed of the behaviour of CACs in highly alkaline media (2, 8 and 12M NaOH solutions. Two, 28- and 180-day mechanical strength was determined and the reaction products were characterized with XRD and FTIR. The water-hydrated CAC was used as the control.The results obtained showed that CAC hardening took place much more slowly in highly alkaline media than in water. Nonetheless, the 28-day compressive strength obtained, ≥80MPa. As main reaction products, to ambient temperature and from the two days of cured, cubic aluminate C3AH6, and AH3 polymorphs are formed, instead of the usual hexagonal aluminatos (CAH10 and C2AH8 that are formed in the normal hydrate with water.El presente trabajo forma parte de una amplia investigación cuyo objetivo principal es el de elaborar nuevos materiales con propiedades cementantes mediante la activación alcalina de materiales de naturaleza silito-aluminosa. En estos estudios se contempla la posibilidad de utilizar pequeños porcentajes de cemento de aluminato de calcio (CAC como fuente de aluminio reactivo. Por ello inicialmente se ha estudiado el comportamiento de los CAC en medios fuertemente alcalinos (disoluciones de NaOH 2M, 8M y 12M. Se determinaron las resistencias mecánicas a 2, 28 y 180 días y se realizó una caracterización de los productos de reacción formados por DRX, FTIR. Como sistema de referencia se consideró la hidratación del CAC con agua.Los resultados obtenidos muestran que en medios fuertemente alcalinos se retrasan los procesos de rápido endurecimiento de CAC con agua. No obstante a 28 días se obtienen valores de resistencia a compresión

  9. An alkaline one-pot reaction to synthesize luminescent Eu-BTC MOF nanorods, highly pure and water-insoluble, under room conditions

    Science.gov (United States)

    Medina-Velazquez, D. Y.; Alejandre-Zuniga, B. Y.; Loera-Serna, S.; Ortiz, E. M.; Morales-Ramirez, A. de J.; Garfias-Garcia, E.; Garcia-Murillo, A.; Falcony, C.

    2016-12-01

    The increasing demand for optoelectronic devices requires the development of luminescent materials with high luminescence efficiency and low energy demands, and the metalorganic frameworks (MOFs) with lanthanides ions offer great potential in this area. The metalorganic materials provide properties of flexibility, low density, low-cost methods of synthesis, and insolubility in water, which gives them an advantage over traditional phosphors. In this study, a benzenetricarboxylate ligand (BTC) with a Eu3+ MOF was synthesized, and its structural and luminescent properties were measured. The metalorganic compound was generated in a one-pot reaction from europium nitrate and trimesic acid precursors. Through characterization by X-ray diffraction powder, infrared spectroscopy, SEM structural characterization, and luminescent spectroscopy, the formation of Europium benzenetricarboxylate (Eu-BTC) MOF nanorods was tested and the calculated value was in the range of 30-60 nm. A red luminescent emission with high intensity was observed for all the procedures.

  10. The Nature of Surface Oxides on Corrosion-Resistant Nickel Alloy Covered by Alkaline Water

    Directory of Open Access Journals (Sweden)

    Gervasio DF

    2010-01-01

    Full Text Available Abstract A nickel alloy with high chrome and molybdenum content was found to form a highly resistive and passive oxide layer. The donor density and mobility of ions in the oxide layer has been determined as a function of the electrical potential when alkaline water layers are on the alloy surface in order to account for the relative inertness of the nickel alloy in corrosive environments.

  11. Heterogeneous anion conducting membranes based on linear and crosslinked KOH doped polybenzimidazole for alkaline water electrolysis

    DEFF Research Database (Denmark)

    Aili, David; Hansen, Martin Kalmar; Renzaho, Richard Fulgence

    2013-01-01

    Polybenzimidazole is a highly hygroscopic polymer that can be doped with aqueous KOH to give a material with high ion conductivity in the 10−2Scm−1 range, which in combination with its low gas permeability makes it an interesting electrolyte material for alkaline water electrolysis. In this study...... on their linear counterpart. The technical feasibility of the membranes was evaluated by the preliminary water electrolysis tests showing performance comparable to that of commercially available cell separators with great potential of further improvement....

  12. Heterotrophic microflora of highly alkaline (pH > 13) brown mud disposal site drainage water near Ziar nad Hronom (Banska Bystrica region, Slovakia).

    Science.gov (United States)

    Stramova, Zuzana; Remenar, Matej; Javorsky, Peter; Pristas, Peter

    2016-03-01

    Brown mud is a waste by-product of alumina production by Bayer process. Due to extensive sodium hydroxide use in the process, brown mud disposal site near Ziar nad Hronom (Banska Bystrica region, Slovakia) and drainage water are ones of the greatest environmental burdens in Slovakia. Drainage water from this landfills has pH value higher than 13, and it contains many heavy metals and elevated salt content. In our experiments, relatively numerous bacterial population was detected in the drainage water with frequency of about 80 cfu/ml using cultivation approach. The alkalitolerant heterotrophic isolates were identified by combination of MALDI-TOF and 16S rDNA analysis. Drainage water population was dominated by Actinobacteria (Microbacterium spp. and Micrococcus spp.) followed by low G + C-content gram-positive bacteria (Bacillus spp.). Two isolates belonged to gram-negative bacteria only, identified as Brevundimonas spp. Phylogenetic and biochemical analyses indicate that nearly half of the bacteria isolated are probably representatives of a new species. Brown mud disposal site is proposed as a source of new bacterial taxa possibly used in bioremediation processes.

  13. Synthesis of High-Quality Graphene through Electrochemical Exfoliation of Graphite in Alkaline Electrolyte

    OpenAIRE

    Tripathi, Prashant; Patel, Ch. Ravi Prakash; Shaz, M. A.; Srivastava, O N

    2013-01-01

    Owing to wide variety of applications of graphene, high-quality and economical way of synthesizing graphene is highly desirable. In this study, we report a cost effective and simple approach to production of high-quality graphene. Here the synthesis route is based on electrochemical exfoliation of graphite. Instead of using strong acids (which oxidise and damage the geometrical topology of graphene), we have used alkaline solution (KOH dissolved in water) as electrolyte. TEM analysis shows th...

  14. High-performance alkaline polymer electrolyte for fuel cell applications

    Energy Technology Data Exchange (ETDEWEB)

    Pan, Jing; Lu, Shanfu; Li, Yan; Huang, Aibin; Zhuang, Lin; Lu, Juntao [College of Chemistry and Molecular Sciences, Hubei Key Lab. of Electrochemical Power Sources, Wuhan University (China)

    2010-01-22

    Although the proton exchange membrane fuel cell (PEMFC) has made great progress in recent decades, its commercialization has been hindered by a number of factors, among which is the total dependence on Pt-based catalysts. Alkaline polymer electrolyte fuel cells (APEFCs) have been increasingly recognized as a solution to overcome the dependence on noble metal catalysts. In principle, APEFCs combine the advantages of and alkaline fuel cell (AFC) and a PEMFC: there is no need for noble metal catalysts and they are free of carbonate precipitates that would break the waterproofing in the AFC cathode. However, the performance of most alkaline polyelectrolytes can still not fulfill the requirement of fuel cell operations. In the present work, detailed information about the synthesis and physicochemical properties of the quaternary ammonia polysulfone (QAPS), a high-performance alkaline polymer electrolyte that has been successfully applied in the authors' previous work to demonstrate an APEFC completely free from noble metal catalysts (S. Lu, J. Pan, A. Huang, L. Zhuang, J. Lu, Proc. Natl. Acad. Sci. USA 2008, 105, 20611), is reported. Monitored by NMR analysis, the synthetic process of QAPS is seen to be simple and efficient. The chemical and thermal stability, as well as the mechanical strength of the synthetic QAPS membrane, are outstanding in comparison to commercial anion-exchange membranes. The ionic conductivity of QAPS at room temperature is measured to be on the order of 10{sup -2} S cm{sup -1}. Such good mechanical and conducting performances can be attributed to the superior microstructure of the polyelectrolyte, which features interconnected ionic channels in tens of nanometers diameter, as revealed by HRTEM observations. The electrochemical behavior at the Pt/QAPS interface reveals the strong alkaline nature of this polyelectrolyte, and the preliminary fuel cell test verifies the feasibility of QAPS for fuel cell applications. (Abstract Copyright [2010

  15. ALKALINE PEROXIDE BLEACHING OF HOT WATER TREATED WHEAT STRAW

    Directory of Open Access Journals (Sweden)

    Suvi Mustajoki

    2010-05-01

    Full Text Available The aim of this study was to evaluate the possibilities for chemical consumption reduction in P-P-Paa-P bleaching (P alkaline peroxide stage, Paa peracetic stage of hot water treated straw and the effect of the wheat straw variability on the process. Papermaking fibre production from wheat straw using such a process could be implemented on a small scale if chemical consumption was low enough to eliminate the need for chemical recovery. The pulp properties obtained with this process are equal to or even superior to the properties of wheat straw soda pulp. The possibility of enhancing the first peroxide stage with oxygen and pressure was studied. The possibility for substitution of sodium hydroxide partially with sodium carbonate was also investigated. The objective was to achieve International Standardization Organization (ISO brightness of 75%, with minimal sodium hydroxide consumption, whilst maintaining the pulp properties. The optimization of the peroxide bleaching is challenging if the final brightness target cannot be reduced. Results indicate that up to 25% of the sodium hydroxide could be substituted with sodium carbonate without losing brightness or affecting pulp properties. Another possibility is a mild alkali treatment between the hot water treatment and the bleaching sequence.

  16. Evaluation of High Solids Alkaline Pretreatment of Rice Straw

    OpenAIRE

    Cheng, Yu-Shen; Zheng, Yi; Yu, Chao Wei; Dooley, Todd M.; Jenkins, Bryan M.; VanderGheynst, Jean S.

    2010-01-01

    Fresh-harvested, air-dried rice straw was pretreated at a water content of 5 g H2O/g straw using sodium hydroxide (NaOH) and compared to pretreatment at 10 g H2O/g straw by hydrated lime (Ca(OH)2). Full factorial experiments including parallel wash-only treatments were completed with both sources of alkali. The experiments were designed to measure the effects of alkaline loading and pretreatment time on delignification and sugar yield upon enzymatic hydrolysis. Reaction temperature was held c...

  17. Cultivation of marine shrimp in biofloc technology (BFT) system under different water alkalinities.

    Science.gov (United States)

    Piérri, V; Valter-Severino, D; Goulart-de-Oliveira, K; Manoel-do-Espírito-Santo, C; Nascimento-Vieira, F; Quadros-Seiffert, W

    2015-08-01

    The aim of this study was to evaluate the influence of different levels of alkalinity for the superintensive cultivation of marine shrimp Litopenaeus vannamei in biofloc system. A total of 12 experimental circular units of 1000L were used supplied with 850L water from a nursery, populated at a density of 165 shrimps.m-3 and average weight of 5.6 g. The treatments, in triplicate, consisted in four levels of alkalinity in the water: 40, 80, 120 and 160 mg.L-1 of calcium carbonate. To correct the alkalinity was used calcium hydroxide (CaOH). It was observed a decrease in pH of the water in the treatments with lower alkalinity (pLitopenaeus vannamei in biofloc at density of 165 shrimps.m-3 can be performed in waters with alkalinity between 40 and 160 mg.L-1 of CaCO3, without compromising the zootechnical indexes of cultivation.

  18. Evaluation of a Membrane Biological Reactor for Reclaiming Water, Alkalinity, Salts, Phosphorus, and Protein Contained in a High-Strength Aquacultural Wastewater

    Science.gov (United States)

    The capacity of a membrane biological reactor to provide nitrification, denitrification, and enhanced biological phosphorus removal of a high-strength aquaculture backwash flow (control condition), or the same flow amended with 100 mg/L of NO3-N and 3 mg/L of dissolved P (test condition), was assess...

  19. Facile electrochemical co-deposition of a graphene-cobalt nanocomposite for highly efficient water oxidation in alkaline media: direct detection of underlying electron transfer reactions under catalytic turnover conditions.

    Science.gov (United States)

    Guo, Si-Xuan; Liu, Yuping; Bond, Alan M; Zhang, Jie; Esakki Karthik, P; Maheshwaran, I; Senthil Kumar, S; Phani, K L N

    2014-09-21

    A facile electrochemical co-deposition method has been developed for the fabrication of graphene-cobalt nanocomposite modified electrodes that achieve exceptionally efficient water oxidation in highly alkaline media. In the method reported, a graphene-cobalt nanocomposite film was deposited electrochemically from a medium containing 1 mg ml(-1) graphene oxide, 0.8 mM cobalt nitrate and 0.05 M phytic acid (pH 7). The formation of the nanocomposite film was confirmed using electrochemical, Raman spectroscopic and scanning electron microscopic techniques. The nanocomposite film exhibits excellent activity and stability towards water oxidation to generate oxygen in 1 M NaOH aqueous electrolyte media. A turn over frequency of 34 s(-1) at an overpotential of 0.59 V and a faradaic efficiency of 97.7% were deduced from analysis of data obtained by rotating ring disk electrode voltammetry. Controlled potential electrolysis data suggests that the graphene supported catalyst exhibits excellent stability under these harsh conditions. Phytate anion acts as stabilizer for the electrochemical formation of cobalt nanoparticles. Fourier transformed ac voltammetry allowed the redox chemistry associated with catalysis to be detected directly under catalytic turnover conditions. Estimates of formal reversible potentials obtained from this method and derived from the overall reactions 3Co(OH)2 + 2OH(-) ⇌ Co3O4 + 4H2O + 2e(-), Co3O4 + OH(-) ⇌ 3CoOOH + e(-) and CoOOH + OH(-) ⇌ CoO2 + H2O + e(-) are 0.10, 0.44 and 0.59 V vs. Ag/AgCl, respectively.

  20. Sequential Washing with Electrolyzed Alkaline and Acidic Water Effectively Removes Pathogens from Metal Surfaces

    Science.gov (United States)

    Nakano, Yuichiro; Akamatsu, Norihiko; Mori, Tsuyoshi; Sano, Kazunori; Satoh, Katsuya; Nagayasu, Takeshi; Miyoshi, Yoshiaki; Sugio, Tomomi; Sakai, Hideyuki; Sakae, Eiji; Ichimiya, Kazuko; Hamada, Masahisa; Nakayama, Takehisa; Fujita, Yuhzo; Yanagihara, Katsunori; Nishida, Noriyuki

    2016-01-01

    Removal of pathogenic organisms from reprocessed surgical instruments is essential to prevent iatrogenic infections. Some bacteria can make persistent biofilms on medical devices. Contamination of non-disposable equipment with prions also represents a serious risk to surgical patients. Efficient disinfection of prions from endoscopes and other instruments such as high-resolution cameras remains problematic because these instruments do not tolerate aggressive chemical or heat treatments. Herein, we develop a new washing system that uses both the alkaline and acidic water produced by electrolysis. Electrolyzed acidic water, containing HCl and HOCl as active substances, has been reported to be an effective disinfectant. A 0.15% NaCl solution was electrolyzed and used immediately to wash bio-contaminated stainless steel model systems with alkaline water (pH 11.9) with sonication, and then with acidic water (pH 2.7) without sonication. Two bacterial species (Staphylococcus aureus and Pseudomonas aeruginosa) and a fungus (Candida albicans) were effectively removed or inactivated by the washing process. In addition, this process effectively removed or inactivated prions from the stainless steel surfaces. This washing system will be potentially useful for the disinfection of clinical devices such as neuroendoscopes because electrolyzed water is gentle to both patients and equipment and is environmentally sound. PMID:27223116

  1. Sequential Washing with Electrolyzed Alkaline and Acidic Water Effectively Removes Pathogens from Metal Surfaces.

    Science.gov (United States)

    Nakano, Yuichiro; Akamatsu, Norihiko; Mori, Tsuyoshi; Sano, Kazunori; Satoh, Katsuya; Nagayasu, Takeshi; Miyoshi, Yoshiaki; Sugio, Tomomi; Sakai, Hideyuki; Sakae, Eiji; Ichimiya, Kazuko; Hamada, Masahisa; Nakayama, Takehisa; Fujita, Yuhzo; Yanagihara, Katsunori; Nishida, Noriyuki

    2016-01-01

    Removal of pathogenic organisms from reprocessed surgical instruments is essential to prevent iatrogenic infections. Some bacteria can make persistent biofilms on medical devices. Contamination of non-disposable equipment with prions also represents a serious risk to surgical patients. Efficient disinfection of prions from endoscopes and other instruments such as high-resolution cameras remains problematic because these instruments do not tolerate aggressive chemical or heat treatments. Herein, we develop a new washing system that uses both the alkaline and acidic water produced by electrolysis. Electrolyzed acidic water, containing HCl and HOCl as active substances, has been reported to be an effective disinfectant. A 0.15% NaCl solution was electrolyzed and used immediately to wash bio-contaminated stainless steel model systems with alkaline water (pH 11.9) with sonication, and then with acidic water (pH 2.7) without sonication. Two bacterial species (Staphylococcus aureus and Pseudomonas aeruginosa) and a fungus (Candida albicans) were effectively removed or inactivated by the washing process. In addition, this process effectively removed or inactivated prions from the stainless steel surfaces. This washing system will be potentially useful for the disinfection of clinical devices such as neuroendoscopes because electrolyzed water is gentle to both patients and equipment and is environmentally sound.

  2. Sequential Washing with Electrolyzed Alkaline and Acidic Water Effectively Removes Pathogens from Metal Surfaces.

    Directory of Open Access Journals (Sweden)

    Yuichiro Nakano

    Full Text Available Removal of pathogenic organisms from reprocessed surgical instruments is essential to prevent iatrogenic infections. Some bacteria can make persistent biofilms on medical devices. Contamination of non-disposable equipment with prions also represents a serious risk to surgical patients. Efficient disinfection of prions from endoscopes and other instruments such as high-resolution cameras remains problematic because these instruments do not tolerate aggressive chemical or heat treatments. Herein, we develop a new washing system that uses both the alkaline and acidic water produced by electrolysis. Electrolyzed acidic water, containing HCl and HOCl as active substances, has been reported to be an effective disinfectant. A 0.15% NaCl solution was electrolyzed and used immediately to wash bio-contaminated stainless steel model systems with alkaline water (pH 11.9 with sonication, and then with acidic water (pH 2.7 without sonication. Two bacterial species (Staphylococcus aureus and Pseudomonas aeruginosa and a fungus (Candida albicans were effectively removed or inactivated by the washing process. In addition, this process effectively removed or inactivated prions from the stainless steel surfaces. This washing system will be potentially useful for the disinfection of clinical devices such as neuroendoscopes because electrolyzed water is gentle to both patients and equipment and is environmentally sound.

  3. Phosphorus Mobilization from Manure-Amended and Unamended Alkaline Soils to Overlying Water during Simulated Flooding.

    Science.gov (United States)

    Amarawansha, E A G S; Kumaragamage, D; Flaten, D; Zvomuya, F; Tenuta, M

    2015-07-01

    Anaerobic soil conditions resulting from flooding often enhance release of phosphorus (P) to overlying water. Enhanced P release is well documented for flooded acidic soils; however, there is little information for flooded alkaline soils. We examined the effect of flooding and anaerobic conditions on P mobilization using 12 alkaline soils from Manitoba that were either unamended or amended with solid cattle manure. Pore water and floodwater were analyzed over 8 wk of simulated flooding for dissolved reactive P (DRP), Ca, Mg, Fe, and Mn. As expected, manured soils had significantly greater pore and floodwater DRP concentrations than unamended. Flooding increased pore water DRP concentrations significantly in all soils and treatments except one manured clay in which concentrations increased initially and then decreased. Floodwater DRP concentrations increased significantly by two- to 15-fold in 10 soils regardless of amendment treatment but remained relatively stable in the two soils with greatest clay content. Phosphorus release at the onset of flooding was associated with the release of Ca, Mg, and Mn, suggesting that P release may be controlled by the dissolution of Mg and Ca phosphates and reductive dissolution of Mn phosphates. Thereafter, P release was associated with release of Fe, suggesting the reductive dissolution of Fe phosphates. Differences in pore water and floodwater DRP concentrations among soils and amendment treatments and the high variability in P mobilization from pore water to floodwater among soils indicate the need to further investigate chemical reactions responsible for P release and mobility under anaerobic conditions.

  4. Systematic review of the association between dietary acid load, alkaline water and cancer.

    Science.gov (United States)

    Fenton, Tanis R; Huang, Tian

    2016-06-13

    To evaluate the evidence for a causal relationship between dietary acid/alkaline and alkaline water for the aetiology and treatment of cancer. A systematic review was conducted on published and grey literature separately for randomised intervention and observational studies with either varying acid-base dietary intakes and/or alkaline water with any cancer outcome or for cancer treatment. Incidence of cancer and outcomes of cancer treatment. 8278 citations were identified, and 252 abstracts were reviewed; 1 study met the inclusion criteria and was included in this systematic review. No randomised trials were located. No studies were located that examined dietary acid or alkaline or alkaline water for cancer treatment. The included study was a cohort study with a low risk of bias. This study revealed no association between the diet acid load with bladder cancer (OR=1.15: 95% CI 0.86 to 1.55, p=0.36). No association was found even among long-term smokers (OR=1.72: 95% CI 0.96 to 3.10, p=0.08). Despite the promotion of the alkaline diet and alkaline water by the media and salespeople, there is almost no actual research to either support or disprove these ideas. This systematic review of the literature revealed a lack of evidence for or against diet acid load and/or alkaline water for the initiation or treatment of cancer. Promotion of alkaline diet and alkaline water to the public for cancer prevention or treatment is not justified. Published by the BMJ Publishing Group Limited. For permission to use (where not already granted under a licence) please go to http://www.bmj.com/company/products-services/rights-and-licensing/

  5. Characterization of Laboratory Prepared Concrete Pastes Exposed to High Alkaline and High Sodium Salt Solutions

    Energy Technology Data Exchange (ETDEWEB)

    Langton, C. A. [Savannah River Site (SRS), Aiken, SC (United States). Savannah River National Lab. (SRNL)

    2016-06-30

    The objective of this study was to identify potential chemical degradation mechanisms for the Saltstone Disposal Unit (SDU) concretes, which over the performance life of the structures may be exposed to highly alkaline sodium salt solutions containing sulfate, hydroxide, and other potentially corrosive chemicals in salt solution and saltstone flush water, drain water, leachate and / or pore solution. The samples analyzed in this study were cement pastes prepared in the SIMCO Technologies, Inc. concrete laboratory. They were based on the paste fractions of the concretes used to construct the Saltstone Disposal Units (SDUs). SDU 1 and 4 concrete pastes were represented by the PV1 test specimens. The paste in the SDU 2, 3, 5, and 6 concrete was represented by the PV2 test specimens. SIMCO Technologies, Inc. selected the chemicals and proportions in the aggressive solutions to approximate proportions in the saltstone pore solution [2, 3, 5, and 6]. These test specimens were cured for 56 days in curing chamber before being immersed in aggressive solutions. After exposure, the samples were frozen to prevent additional chemical transport and reaction. Selected archived (retrieved from the freezer) samples were sent to the Savannah River National Laboratory (SRNL) for additional characterization using x-ray diffraction (XRD), scanning electron microscopy (SEM), and energy dispersive x-ray (EDX) spectroscopy. Characterization results are summarized in this report. In addition, a correlation between the oxide composition of the pastes and their chemical durability in the alkaline salt solutions is provided.

  6. Evaluation of high solids alkaline pretreatment of rice straw.

    Science.gov (United States)

    Cheng, Yu-Shen; Zheng, Yi; Yu, Chao Wei; Dooley, Todd M; Jenkins, Bryan M; VanderGheynst, Jean S

    2010-11-01

    Fresh-harvested, air-dried rice straw was pretreated at a water content of 5 g H(2)O/g straw using sodium hydroxide (NaOH) and compared to pretreatment at 10 g H(2)O/g straw by hydrated lime (Ca(OH)(2)). Full factorial experiments including parallel wash-only treatments were completed with both sources of alkali. The experiments were designed to measure the effects of alkaline loading and pretreatment time on delignification and sugar yield upon enzymatic hydrolysis. Reaction temperature was held constant at 95 degrees C for lime pretreatment and 55 degrees C for NaOH pretreatment. The range of delignification was 13.1% to 27.0% for lime pretreatments and was 8.6% to 23.1% for NaOH pretreatments. Both alkaline loading and reaction time had significant positive effects (p pretreatment at 95 degrees C, but there was little effect observed at 55 degrees C. Post-pretreatment washing of biomass was not necessary for subsequent enzymatic hydrolysis. Maximum glucose yields were 176.3 mg/g dried biomass (48.5% conversion efficiency of total glucose) in lime-pretreated and unwashed biomass and were 142.3 mg/g dried biomass (39.2% conversion efficiency of total glucose) in NaOH-pretreated and unwashed biomass.

  7. Systematic review of the association between dietary acid load, alkaline water and cancer

    National Research Council Canada - National Science Library

    Fenton, Tanis R; Huang, Tian

    2016-01-01

    .... A systematic review was conducted on published and grey literature separately for randomised intervention and observational studies with either varying acid-base dietary intakes and/or alkaline water...

  8. Towards a stable ion-solvating polymer electrolyte for advanced alkaline water electrolysis

    DEFF Research Database (Denmark)

    Aili, David; Wright, Andrew G.; Kraglund, Mikkel Rykær

    2017-01-01

    Advanced alkaline water electrolysis using ion-solvating polymer membranes as electrolytes represents a new direction in the field of electrochemical hydrogen production. Polybenzimidazole membranes equilibrated in aqueous KOH combine the mechanical robustness and gas-tightness of a polymer...

  9. Phosphate solubilizing bacteria and alkaline phosphatase activity in coastal waters off Trivandrum

    Digital Repository Service at National Institute of Oceanography (India)

    Mamatha, S.S.; Gobika, A.; Janani, P.

    Phosphorus is a key nutrient in marine environment. Phosphate solubilising bacteria (PSB) have the ability to solubilise ionic forms of orthophosphoric acid to free form of phosphrous in the water column. Both PSB and alkaline phosphatase activity...

  10. Health Effects of Alkaline Diet and Water, Reduction of Digestive-tract Bacterial Load, and Earthing.

    Science.gov (United States)

    Mousa, Haider Abdul-Lateef

    2016-04-01

    In the article, the author discusses the issue of chronic, low-grade acidosis that is thought to be brought about primarily by 2 factors: (1) advancing age, with a consequent decline in renal function; and (2) diet. An acid-forming diet can induce low-grade metabolic acidosis, which causes very small decreases in blood pH and plasma bicarbonate (HCO3-) that remain within the range considered to be normal. However, if the duration of the acidosis is prolonged or chronically present, even a low degree of acidosis can become significant. This article reviews supporting evidence in the literature that has shown that consumption of abundant alkaline-forming foods can result in improvement in bone mineral density (BMD) and muscle mass, protection from chronic illnesses, reduced tumor-cell invasion and metastasis, and effective excretion of toxins from the body. In addition, a large number of studies showing the benefits of alkaline water (mineral water) have revealed that people consuming water with a high level of total dissolved solids (TDS) (ie, with a high mineral content) have shown a lower incidence of coronary heart disease (CHD), cardiovascular disease (CVD), and cancer and lower total mortality rates. Consumption of alkaline water also may prevent osteoporosis and protect pancreatic beta cells with its antioxidant effects. In addition, this article discusses the literature that shows that reducing digestive-tract bacterial load can play an important role in increasing blood alkalinity toward the normal upper limit. That change occurs through good oral hygiene, flossing of teeth, perfect chewing of food, and bowel evacuation as soon as possible. Finally, the author reviews the literature that shows that earthing (ie, the direct contact of the human body with the earth) can supply a current of plentiful electrons. Earthing has been shown to reduce acute and chronic inflammation, blood glucose in patients with diabetes, red blood cell (RBC) aggregation, and blood

  11. Interconnected Copper Cobaltite Nanochains as Efficient Electrocatalysts for Water Oxidation in Alkaline Medium.

    Science.gov (United States)

    Karmakar, Ayon; Srivastava, Suneel Kumar

    2017-07-12

    The present work is focused on the protective-agent-free synthesis of interconnected copper cobaltite (Cu0.3Co2.7O4) nanochains by temperature-controlled solvothermal method followed by post-thermal treatment of the precursors. Furthermore, Cu0.3Co2.7O4 interconnected nanochains are employed as electrocatalyst for water oxidation in alkaline medium for the first time. Extensive studies of physiochemical properties showed the formation of interconnected 1D nanochains of Cu0.3Co2.7O4 exhibiting a larger specific surface area (139.5 m(2) g(-1)) and enhanced electrochemical water oxidation ability. It delivered excellent mass activity (∼50.0 A g(-1)), high anodic current density (∼124.9 mA cm(-2) at 1.75 V versus reversible hydrogen electrode), and turnover frequency (∼4.26 × 10(-2) s(-1)) in 1.0 M KOH. These Cu0.3Co2.7O4 nanochains also demonstrated low overpotential (∼351 mV) and good cycling stability (1000 cycles) in strong alkaline media. The fabricated Cu0.3Co2.7O4 nanochains could be a good alternative to the commercial OER electrocatalysts (RuO2 and IrO2) and also advantageous to the development of efficient, cost-effective, and durable electrocatalysts for electrochemical water splitting.

  12. Nitrogenous Waste Handling by Larval Zebrafish Danio rerio in Alkaline Water.

    Science.gov (United States)

    Kumai, Yusuke; Harris, Jessica; Al-Rewashdy, Hasanen; Kwong, Raymond W M; Perry, Steve F

    2015-01-01

    Although adult fish excrete their nitrogenous waste primarily as ammonia, larval fish may excrete a higher proportion as urea, an evolutionary strategy that lessens nitrogenous waste toxicity during early development. Previous studies firmly established that ammonia excretion is inhibited in adult fish acutely exposed to alkaline water. This study was designed to test the hypothesis that total nitrogen excretion is maintained in larval zebrafish raised in alkaline water (pH ∼ 10.0) as a result of compensatory adjustments to urea and/or ammonia transport pathways. Raising zebrafish in alkaline water from 0 to 4 d postfertilization (dpf) reduced ammonia excretion at 4 dpf, whereas urea excretion was elevated by 141%. The increase in urea excretion at 4 dpf served to maintain total nitrogen excretion constant, despite the persistent inhibition of ammonia excretion. Whole body ammonia and urea contents were not significantly altered by exposure to alkaline water. Protein and mRNA expression of Rhcg1, an apically expressed ammonia-conducting channel, were significantly elevated after 4-d exposure to alkaline water, whereas the mRNA expression of Rhag, Rhbg, and urea transporter were unaffected. The acute exposure to alkaline water of 4-dpf larvae reared in control water caused a rapid inhibition of ammonia excretion that had partially recovered within 6 h of continued exposure. The partial recovery of ammonia excretion despite continued exposure to alkaline water suggested an increased ammonia excretion capacity. In agreement with an increased capacity to excrete ammonia, the transfer of larvae back to the control (normal pH) water was accompanied by increased rates of ammonia excretion. Urea excretion was not stimulated during 6-h exposure to alkaline water. Following both chronic and acute exposure to alkaline water, the rate of uptake of methylamine (an ammonia analog) was significantly elevated, consistent with increased protein expression of the apical ammonia

  13. Cultivation of marine shrimp in biofloc technology (BFT system under different water alkalinities

    Directory of Open Access Journals (Sweden)

    V Piérri

    Full Text Available AbstractThe aim of this study was to evaluate the influence of different levels of alkalinity for the superintensive cultivation of marine shrimp Litopenaeus vannamei in biofloc system. A total of 12 experimental circular units of 1000L were used supplied with 850L water from a nursery, populated at a density of 165 shrimps.m–3 and average weight of 5.6 g. The treatments, in triplicate, consisted in four levels of alkalinity in the water: 40, 80, 120 and 160 mg.L–1 of calcium carbonate. To correct the alkalinity was used calcium hydroxide (CaOH. It was observed a decrease in pH of the water in the treatments with lower alkalinity (p<0.05. The total suspended settleable solids were also lower in the treatment of low alkalinity. No significant difference was observed in other physico-chemical and biological parameters in the water quality assessed, as well as the zootechnical parameters of cultivation between treatments (p≥0.05. The results of survival and growth rate of shrimps were considered suitable for the cultivation system used in the different treatments. The cultivation of marine shrimp Litopenaeus vannamei in biofloc at density of 165 shrimps.m–3 can be performed in waters with alkalinity between 40 and 160 mg.L–1 of CaCO3, without compromising the zootechnical indexes of cultivation.

  14. Control of residual aluminum during coagulation in treatment of reservoir source water with high alkalinity%高碱度水库水混凝过程中残留铝控制

    Institute of Scientific and Technical Information of China (English)

    郭婷婷; 刘锐平; 易秀; 陈桂霞; 胡承志

    2013-01-01

    针对高碱度水库水源的某水厂残留铝超标问题,选取碱化度(B)与Alb含量不同的3种铝盐絮凝剂,研究不同投量与pH值下混凝效果与残留铝浓度水平.结果表明,碱化度和Alb含量显著影响混凝效果.DOC和浊度的去除率随着3种絮凝剂AlCl3(B=0)、PACl-1(B=1.2)、PACl-2(B=2.2)投量增大而升高.3种絮凝剂投量在1.5 ~2.0 mg/L(以铝计)范围内,总铝和溶解铝含量最低.对于该水厂自制的絮凝剂PACl-2,可通过降低絮凝剂碱化度,或将水的pH值降低至7 ~7.5之间,以此可以提高PACl-2混凝效果,而且可以降低出厂水残留铝浓度.考虑工程应用可行性,可优先考虑调整絮凝剂生产工艺.%To minimize the residual aluminum ( Al) levels in the effluent of a drinking water treatment plant (DWTP) with reservoirs source water of high alkalinity, the coagulation performances and the residual Al concentrations using three flocculants, with different basicity ( B ) and Alb content, were investigated under varib-ale Al doses and pH. The results indicate that the basicity and Alb content significantly affect coagulation behaviors. The removal efficiency of DOC and turbidity increases with elevated doses of A1C13(B =0) , PAC1-1 (B -1.2), and PAC1-2 ( B = 2.2). The concentrations of total Al and dissolved Al are the lowest at Al doses of 1. 5 ~ 2. 0 mg/L for three flocculants. As for the PAC1-2, which is prepared by this DWTP, both strategies of decreasing the basicity of flocculant and adjusting the solution pH to 7 ~ 7. 5 are useful to enhance the coagulation performances and to decrease the residual Al levels. Moreover, the adjustment of flocculant preparation is preferred in the future application.

  15. Non-cellulosic heteropolysaccharides from sugarcane bagasse - sequential extraction with pressurized hot water and alkaline peroxide at different temperatures.

    Science.gov (United States)

    Banerjee, Protibha Nath; Pranovich, Andrey; Dax, Daniel; Willför, Stefan

    2014-03-01

    The xylan-rich hemicellulose components of sugarcane bagasse were sequentially extracted with pressurized hot-water extraction (PHWE) and alkaline peroxide. The hemicelluloses were found to contain mainly arabinoxylans with varying substitutions confirmed by different chemical and spectroscopic methods. The arabinoxylans obtained from PHWE were found to be more branched compared to those obtained after alkaline extraction. Sequential extraction could be useful for the isolation of hemicelluloses with different degree of branching, molar mass, and functional groups from sugarcane bagasse, which can be of high potential use for various industrial applications.

  16. Manganese Dioxide with High Specific Surface Area for Alkaline Battery

    Institute of Scientific and Technical Information of China (English)

    HUANG You-ju; LIN Yu-li; LI Wei-shan

    2012-01-01

    The authors reported a facile method for the synthesis of manganese dioxide without any template and catalyst at a low-temperature.The prepared sample was characterized with X-ray diffraction(XRD),scanning electron microscopy(SEM),Brunauer-Emmett-Teller(BET) surface analysis,Fourier transform infrared(FTIR) spectrometry,cyclic voltammetry,altemative current(AC) impedance test and battery discharge test.It is found that the prepared sample belongs to α-MnO2 and has a microsphere morphology and a large BET surface area.The electrochemical characterization indicates that the prepared sample displays a larger electrochemical capacitance than the commercial electrolytic manganese dioxides(EMD) in Na2SO4 solution,and exhibits larger discharge capacity than EMD,especially at a high rate discharge condition when it is used as cathode of alkaline Zn/MnO2 battery.

  17. Influence of Hydration Level on Polymer and Water Dynamics in Alkaline Anion Exchange Fuel Cell Membranes

    Science.gov (United States)

    Tarver, Jacob; Kim, Jenny; Tyagi, Madhu; Soles, Christopher; Tsai, Tsung-Han; Coughlin, Bryan

    2015-03-01

    Triblock copolymers based on poly(chloromethylstyrene)-b-poly(ethylene)-b-poly(chloromethylstyrene) can be quaternized to different extents to yield anion exchange membranes for alkaline fuel cells. In the absence of moisture, these membranes demonstrate bilayer lamellar morphology. Upon high levels of hydration, however, in-situ small angle neutron scattering reveals the emergence of higher-order diffraction peaks. This phenomena has previously been observed in analogous diblock copolymer-based membranes and has been attributed to the induction of a multilayer lamellar morphology in which selective striping of water occurs in the center of the ion-rich domain. By conducting humidity-resolved quasielastic neutron scattering (QENS) measurements using deuterated water, we are able to isolate differences in the pico- to nanosecond timescale dynamics of the hydrogenated membrane upon hydration. QENS measurements in the presence of a hydrogenated water source subsequently permit deconvolution and isolation of the translational and rotational dynamics of water as a function of relative humidity, revealing spatial and temporal changes in polymer and water motion at high levels of hydration.

  18. Development of durable and efficient electrodes for large-scale alkaline water electrolysis

    DEFF Research Database (Denmark)

    Kjartansdóttir, Cecilia Kristin; Nielsen, Lars Pleth; Møller, Per

    2013-01-01

    A new type of electrodes for alkaline water electrolysis is produced by physical vapour depositing (PVD) of aluminium onto a nickel substrate. The PVD Al/Ni is heat-treated to facilitate alloy formation followed by a selective aluminium alkaline leaching. The obtained porous Ni surface is uniform...... and characterized by a unique interlayer adhesion, which is critical for industrial application. IR-compensated polarisation curves prepared in a half-cell setup with 1 M KOH electrolyte at room temperature reveals that at least 400 mV less potential is needed to decompose water into hydrogen and oxygen...

  19. Nanostructured Nickel-Cobalt-Titanium Alloy Grown on Titanium Substrate as Efficient Electrocatalyst for Alkaline Water Electrolysis.

    Science.gov (United States)

    Ganesan, Pandian; Sivanantham, Arumugam; Shanmugam, Sangaraju

    2017-04-12

    One of the important challenges in alkaline water electrolysis is to utilize a bifunctional catalyst for both hydrogen evolution (HER) and oxygen evolution (OER) reactions to increase the efficiency of water splitting devices for the long durable operations. Herein, nickel-cobalt-titanium (NCT) alloy is directly grown on a high corrosion resistance titanium foil by a simple, single, and rapid electrochemical deposition at room temperature. The electrocatalytic activity of NCT alloy electrodes is evaluated for both HER and OER in aqueous electrolyte. Our NCT electrocatalyst exhibits low overpotentials around 125 and 331 mV for HER and OER, respectively, in 1 M KOH. In addition to this outstanding activity, the bifunctional catalyst also exhibits excellent OER and HER electrode stability up to 150 h of continuous operation with a minimal loss in activity. Further, the NCT alloy directly grown on titanium foil is used to directly construct membrane electrode assembly (MEA) for alkaline electrolyte membrane (AEM) water electrolyzer, which make the practical applicability. This single-step electrodeposition reveals NCT on titanium foil with high activity and excellent electrode stability suitable for replacing alternative commercial viable catalyst for the alkaline water splitting.

  20. Cultivation of Pleurotus pulmonarius on substrates treated by immersion in alkaline water in Guerrero, Mexico

    OpenAIRE

    T. Bernabé-González; M. Cayetano-Catarino

    2009-01-01

    Pleurotus pulmonarius was cultivated on dry banana leaves (Musa paradisiaca) or dry "palmareca" leaves (Chrysalidocarpus lutescens), using two substrate treatments. Substrates were immersed in water containing 2% lime for 24 h and used for mushroom cultivation, in comparison with the method of immersing substrates in hot water at ±80 C for 1 h. The highest mushroom production was obtained on banana leaves immersed in alkaline water, reaching 120.1% of biological efficiency in a period of 61 d...

  1. Activation of fly ashes by the high temperature and high alkalinity in ASR tests

    Institute of Scientific and Technical Information of China (English)

    2011-01-01

    High temperature and high alkalinity are typical testing conditions to accelerate the appraisal process of the suppressing effect of fly ashes on alkali silica reaction(ASR),but the reaction mechanism of fly ashes would be quite different under such conditions compared to the normal condition of temperature and alkalinity.To make a reasonable analysis of the suppressing effect of fly ashes,13 types of fly ashes were tested in this paper by both the accelerated mortar bar test method and the 60°C accelerated concrete prism test method.The results showed that the effect of fly ashes would be magnified under the condition of high temperature and high alkalinity.The XRD analysis showed that all the phases of fly ash could react with the hot alkaline solution except for mullite and a small amount of quartz.Fly ash could be significantly activated by the 80°C 1 mol/L NaOH solution,and form mainly C-S-H phase and P type zeolite,but its effect on inhibiting ASR was exaggerated then.According to the mortar strength test and the ASR suppressing test results,C-S-H phase contributed to mortar strength,but its amount did not decide the ASR suppressing effect of fly ash.

  2. A sequential injection system for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples.

    Science.gov (United States)

    Mesquita, Raquel B R; Rangel, António O S S

    2004-08-01

    A sequential injection methodology for the spectrophotometric determination of calcium, magnesium and alkalinity in water samples is proposed. A single manifold is used for the determination of the three analytes, and the same protocol sequence allows the sequential determination of calcium and magnesium (the sum corresponds to the water hardness). The determination of both metals is based on their reaction with cresolphtalein complexone; mutual interference is minimized by using 8-hydroxyquinoline for the determination of calcium and ethylene glycol-bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid (EGTA) for the determination of magnesium. Alkalinity determination is based on a reaction with acetic acid, and corresponding color change of Bromcresol Green. Working ranges of 0.5 - 5 mg dm(-3) for Ca, 0.5 - 10 mg dm(-3) for Mg, and 10 - 100 mg HCO3- dm(-3), for alkalinity have been achieved. The results for water samples were comparable to those of the reference methods and to a certified reference water sample. RSDs lower than 5% were obtained, a low reagent consumption and a reduced volume of effluent have been accomplished. The determination rate for calcium and magnesium is 80 h(-1), corresponding to 40 h(-1) per element, while 65 determinations of alkalinity per hour could be carried out.

  3. Alkaline Earth Core Level Photoemission Spectroscopy of High-Temperature Superconductors

    Science.gov (United States)

    Vasquez, R.

    1993-01-01

    This paper examines photoemission measurements of the alkaline Earth core levels of high-temperature superconductors and related materials, models that seek to explain the large negative shifts observed relative to the corresponding alkaline Earth metals, and the effect of lattice site disorder on the core level spectra and the presence or absence of intrinsic surface peaks.

  4. Alkaline Earth Core Level Photoemission Spectroscopy of High-Temperature Superconductors

    Science.gov (United States)

    Vasquez, R.

    1993-01-01

    This paper examines photoemission measurements of the alkaline Earth core levels of high-temperature superconductors and related materials, models that seek to explain the large negative shifts observed relative to the corresponding alkaline Earth metals, and the effect of lattice site disorder on the core level spectra and the presence or absence of intrinsic surface peaks.

  5. Electrochemical alkaline Fe(VI) water purification and remediation.

    Science.gov (United States)

    Licht, Stuart; Yu, Xingwen

    2005-10-15

    Fe(VI) is an unusual and strongly oxidizing form of iron, which provides a potentially less hazardous water-purifying agent than chlorine. A novel on-line electrochemical Fe(VI) water purification methodology is introduced. Fe(VI) addition had been a barrier to its effective use in water remediation, because solid Fe(VI) salts require complex (costly) syntheses steps and solutions of Fe(VI) decompose. Online electrochemical Fe(VI) water purification avoids these limitations, in which Fe(VI) is directly prepared in solution from an iron anode as the FeO42- ion, and is added to the contaminant stream. Added FeO42- decomposes, by oxidizing a wide range of water contaminants including sulfides (demonstrated in this study) and other sulfur-containing compounds, cyanides (demonstrated in this study), arsenic (demonstrated in this study), ammonia and other nitrogen-containing compounds (previously demonstrated), a wide range of organics (phenol demonstrated in this study), algae, and viruses (each previously demonstrated).

  6. A constructed alkaline consortium and its dynamics in treating alkaline black liquor with very high pollution load.

    Directory of Open Access Journals (Sweden)

    Chunyu Yang

    Full Text Available BACKGROUND: Paper pulp wastewater resulting from alkaline extraction of wheat straw, known as black liquor, is very difficult to be treated and causes serious environmental problems due to its high pH value and chemical oxygen demand (COD pollution load. Lignin, semicellulose and cellulose are the main contributors to the high COD values in black liquor. Very few microorganisms can survive in such harsh environments of the alkaline wheat straw black liquor. A naturally developed microbial community was found accidentally in a black liquor storing pool in a paper pulp mill of China. The community was effective in pH decreasing, color and COD removing from the high alkaline and high COD black liquor. FINDINGS: Thirty-eight strains of bacteria were isolated from the black liquor storing pool, and were grouped as eleven operational taxonomy units (OTUs using random amplified polymorphic DNA-PCR profiles (RAPD. Eleven representative strains of each OTU, which were identified as genera of Halomonas and Bacillus, were used to construct a consortium to treat black liquor with a high pH value of 11.0 and very high COD pollution load of 142,600 mg l(-1. After treatment by the constructed consortium, about 35.4% of color and 39,000 mg l(-1 (27.3% COD(cr were removed and the pH decreased to 7.8. 16S rRNA gene polymerase chain reaction denaturant gradient gel electrophoresis (PCR-DGGE and gas chromatography/mass spectrometry (GC/MS analysis suggested a two-stage treatment mechanism to elucidate the interspecies collaboration: Halomonas isolates were important in the first stage to produce organic acids that contributed to the pH decline, while Bacillus isolates were involved in the degradation of lignin derivatives in the second stage under lower pH conditions. CONCLUSIONS/SIGNIFICANCE: Tolerance to the high alkaline environment and good controllability of the simple consortium suggested that the constructed consortium has good potential for black liquor

  7. Ternary NiCoP nanosheet arrays: An excellent bifunctional catalyst for alkaline overall water splitting

    Institute of Scientific and Technical Information of China (English)

    Yingjie Li; Haichuan Zhang; Ming Jiang; Yun Kuang; Xiaoming Sun; Xue Duan

    2016-01-01

    Exploring bifunctional catalysts for the hydrogen and oxygen evolution reactions (HER and OER) with high efficiency,low cost,and easy integration is extremely crucial for future renewable energy systems.Herein,ternary NiCoP nanosheet arrays (NSAs) were fabricated on 3D Ni foam by a facile hydrothermal method followed by phosphorization.These arrays serve as bifunctional alkaline catalysts,exhibiting excellent electrocatalytic performance and good working stability for both the HER and OER.The overpotentials of the NiCoP NSA electrode required to drive a current density of 50 mA/cm2 for the HER and OER are as low as 133 and 308 mV,respectively,which is ascribed to excellent intrinsic electrocatalytic activity,fast electron transport,and a unique superaerophobic structure.When NiCoP was integrated as both anodic and cathodic material,the electrolyzer required a potential as low as ~1.77 V to drive a current density of 50 mA/cm2 for overall water splitting,which is much smaller than a reported electrolyzer using the same kind of phosphide-based material and is even better than the combination of Pt/C and Ir/C,the best known noble metal-based electrodes.Combining satisfactory working stability and high activity,this NiCoP electrode paves the way for exploring overall water splitting catalysts.

  8. Regional scale hydrological and biogeochemical processes controlling high biodiversity of a groundwater fed alkaline fen

    Science.gov (United States)

    van der Zee, Sjoerd E. A. T. M.; (D. G.) Cirkel, Gijsbert; (J. P. M) witte, Flip

    2014-05-01

    The high floral biodiversity of groundwater fed fens and mesotrophic grasslands depends on the different chemical signatures of the shallow rainwater fed topsoil water and the slightly deeper geochemically affected groundwater. The relatively abrupt gradients between these two layers of groundwater enable the close proximity of plants that require quite different site factors and have different rooting depths. However, sulphur inflow into such botanically interesting areas is generally perceived as a major threat to biodiversity. Although in Europe atmospheric deposition of sulphur has decreased considerably over the last decades, groundwater pollution by sulphate may still continue due to pyrite oxidation in soil as a result of excessive fertilisation. Inflowing groundwater rich in sulphate can change biogeochemical cycling in nutrient-poor wetland ecosystems because of 'so called' internal eutrophication as well as the accumulation of dissolved sulphide, which is phytotoxic. Complementary to conventions, we propose that upwelling sulphate rich groundwater may, in fact, promote the conservation of rare and threatened alkaline fens: excessive fertilisation and pyrite oxidation also produces acidity, which invokes calcite dissolution, and increased alkalinity and hardness of the inflowing groundwater. For a very species-rich wetland nature reserve, we show that sulphate is reduced and effectively precipitated as iron sulphides, when this calcareous and sulphate rich groundwater flows upward through the organic soil of the investigated nature reserve. Also, we show that sulphate reduction occurs simultaneously with an increase in alkalinity production, which in our case results in active calcite precipitation in the soil. In spite of the occurring sulphate reduction, we found no evidence for internal eutrophication. Extremely low phosphorous concentration in the pore water could be attributed to a high C:P ratio of soil organic matter and co-precipitation with

  9. Effects of hardness and alkalinity in culture and test waters on reproduction of Ceriodaphnia dubia.

    Science.gov (United States)

    Lasier, Peter J; Winger, Parley V; Hardin, Ian R

    2006-10-01

    Ceriodaphnia dubia were cultured in four reconstituted water formulations with hardness and alkalinity concentrations ranging from soft to the moderately hard water that is required by whole-effluent toxicity (WET) testing methods for culturing test organisms. The effects of these culture formulations alone and in combination with two levels of Cl-, SO4(2-), and HCO3- on reproduction of C. dubia were evaluated with the standard three-brood test. Reproduction was significantly reduced when test waters had lower hardness than culture waters. However, reproduction was not significantly different when animals cultured in low-hardness waters were exposed to moderately hard waters. The hardness of the culture water did not significantly affect the sensitivity of C. dubia to the three anions. Conversely, increased hardness in test waters significantly reduced the toxicities of Cl- and SO4(2-), with HCO3- toxicity following the same pattern. Alkalinity exhibited no consistent effect on Cl- and SO4(2-) toxicity. The physiological stress of placing animals cultured in moderately hard water into softer test waters might contribute to marginal failures of otherwise nontoxic effluents. The standard WET protocol should be revised to allow the culture of C. dubia under lower hardness conditions to better represent local surface water chemistries.

  10. Effects of hardness and alkalinity in culture and test waters on reproduction of Ceriodaphnia dubia

    Science.gov (United States)

    Lasier, P.J.; Winger, P.V.; Hardin, I.R.

    2006-01-01

    Ceriodaphnia dubia were cultured in four reconstituted water formulations with hardness and alkalinity concentrations ranging from soft to the moderately hard water that is required by whole-effluent toxicity (WET) testing methods for culturing test organisms. The effects of these culture formulations alone and in combination with two levels of Cl-, SO42, and HCO3- on reproduction of C. dubia were evaluated with the standard three-brood test. Reproduction was significantly reduced when test waters had lower hardness than culture waters. However, reproduction was not significantly different when animals cultured in low-hardness waters were exposed to moderately hard waters. The hardness of the culture water did not significantly affect the sensitivity of C. dubia to the three anions. Conversely, increased hardness in test waters significantly reduced the toxicities of Cl- and SO42-, with HCO3- toxicity following the same pattern. Alkalinity exhibited no consistent effect on Cl- and SO42- toxicity. The physiological stress of placing animals cultured in moderately hard water into softer test waters might contribute to marginal failures of otherwise nontoxic effluents. The standard WET protocol should be revised to allow the culture of C. dubia under lower hardness conditions to better represent local surface water chemistries.

  11. Alkaline subcritical water gasification of dairy industry waste (Whey).

    Science.gov (United States)

    Muangrat, Rattana; Onwudili, Jude A; Williams, Paul T

    2011-05-01

    The near-critical water gasification of dairy industry waste in the form of Whey, a product composed of mixtures of carbohydrates (mainly lactose) and amino acids such as glycine and glutamic acid, has been studied. The gasification process involved partial oxidation with hydrogen peroxide in the presence of NaOH. The reactions were studied over the temperature range from 300°C to 390°C, corresponding pressures of 9.5-24.5 MPa and reaction times from 0 min to 120 min. Hydrogen production was affected by the presence of NaOH, the concentration of H(2)O(2), temperature, reaction time and feed concentration. Up to 40% of the theoretical hydrogen gas production was achieved at 390°C. Over 80% of the Whey nitrogen content was found as ammonia, mainly in the liquid effluent.

  12. Hydrogen embrittlement on {alpha}-iron in high alkaline environment

    Energy Technology Data Exchange (ETDEWEB)

    Hu, R.; Habashi, M.; Galland, J. [Ecole Central Paris, Chatenay-Malabry (France)

    1994-12-31

    The partial pressure of hydrogen in concrete`s pore is very low. This hydrogen is due to the chemical reaction between the silica fumes and the alkaline solutions filling the concrete`s pore. Silica fumes are added in the concrete to increase its compression resistance. If the hydrogen pressure is low, the risk of hydrogen embrittlement is also low. However, for constructional works destined to endure more than 50 years, is this risk negligible? To answer this question, the authors have studied the hydrogen embrittlement on {alpha}-iron in alkaline solutions, in the pH range 9.5 to 13.3, presenting the liquids found in the concrete`s pores after different aging, periods. Cathodic charging has been performed for low current densities in the range 0.25 to 90 A/m{sup 2} simulating several partial pressures of hydrogen on the {alpha}-iron surface with and without EDTA inhibitor. The deformation rate was 2.5{times}10{sup {minus}5} s{sup {minus}1}. Finally {alpha}-iron samples and tensile specimens have been immersed in a mixture of silica fumes and an alkaline solution at pH 13.3 in an autoclave during 1,000 hours with the aim to measure the outgassed quantity of hydrogen under vacuum at 600C and to measure also the hydrogen embrittlement. The main conclusions of this study are as following: (1) Hydrogen embrittlement is promoted by oxide Fe{sub 3}O{sub 4} film rupture and/or hydroxide Fe(OH){sub 2}. This mechanism is efficient for current densities equivalent to a cathodic potential lower or equal to {minus}1V/NHE. (2) Silica fumes in contact with a solution of pH 13.3 provoke hydrogen release and its diffusion into the {alpha}-iron, but this quantity is not enough to embrittle it.

  13. Extremely alkaline (pH > 12) ground water hosts diverse microbial community.

    Science.gov (United States)

    Roadcap, George S; Sanford, Robert A; Jin, Qusheng; Pardinas, José R; Bethke, Craig M

    2006-01-01

    Chemically unusual ground water can provide an environment for novel communities of bacteria to develop. Here, we describe a diverse microbial community that inhabits extremely alkaline (pH > 12) ground water from the Lake Calumet area of Chicago, Illinois, where historic dumping of steel slag has filled in a wetland. Using microbial 16S ribosomal ribonucleic acid gene sequencing and microcosm experiments, we confirmed the presence and growth of a variety of alkaliphilic beta-Proteobacteria, Bacillus, and Clostridium species at pH up to 13.2. Many of the bacterial sequences most closely matched those of other alkaliphiles found in more moderately alkaline water around the world. Oxidation of dihydrogen produced by reaction of water with steel slag is likely a primary energy source to the community. The widespread occurrence of iron-oxidizing bacteria suggests that reduced iron serves as an additional energy source. These results extend upward the known range of pH tolerance for a microbial community by as much as 2 pH units. The community may provide a source of novel microbes and enzymes that can be exploited under alkaline conditions.

  14. Development of conductometric biosensors based on alkaline phosphatases for the water quality control

    CERN Document Server

    Berezhetskyy, A

    2008-01-01

    Researches are focused on the elaboration of enzymatic microconductometric device for heavy metal ions detection in water solutions. The manuscript includes a general introduction, the first chapter contains bibliographic review, the second chapter described the fundamentals of conductometric transducers, the third chapter examining the possibility to create and to optimize conductometric biosensor based on bovine alkaline phosphatase for heavy metals ions detection, the fourth chapter devoted to creation and optimization of conductometric biosensor based on alkaline phosphatase active microalgae and sol gel technology, the last chapter described application of the proposed algal biosensor for measurements of heavy metal ions toxicity of waste water, general conclusions stating the progresses achieved in the field of environmental monitoring

  15. Development of conductometric biosensors based on alkaline phosphatases for the water quality control

    Science.gov (United States)

    Berezhetskyy, A.

    2008-09-01

    Researches are focused on the elaboration of enzymatic microconductometric device for heavy metal ions detection in water solutions. The manuscript includes a general introduction, the first chapter contains bibliographic review, the second chapter described the fundamentals of conductometric transducers, the third chapter examining the possibility to create and to optimize conductometric biosensor based on bovine alkaline phosphatase for heavy metals ions detection, the fourth chapter devoted to creation and optimization of conductometric biosensor based on alkaline phosphatase active microalgae and sol gel technology, the last chapter described application of the proposed algal biosensor for measurements of heavy metal ions toxicity of waste water, general conclusions stating the progresses achieved in the field of environmental monitoring

  16. Solvation structures and dynamics of alkaline earth metal halides in supercritical water: A molecular dynamics study

    Science.gov (United States)

    Keshri, Sonanki; Mandal, Ratnamala; Tembe, B. L.

    2016-09-01

    Constrained molecular dynamics simulations of alkaline earth metal halides have been carried out to investigate their structural and dynamical properties in supercritical water. Potentials of mean force (PMFs) for all the alkaline earth metal halides in supercritical water have been computed. Contact ion pairs (CIPs) are found to be more stable than all other configurations of the ion pairs except for MgI2 where solvent shared ion pair (SShIP) is more stable than the CIP. There is hardly any difference in the PMFs between the M2+ (M = Mg, Ca, Sr, Ba) and the X- (X = F, Cl, Br, I) ions whether the second X- ion is present in the first coordination shell of the M2+ ion or not. The solvent molecules in the solvation shells diffuse at a much slower rate compared to the bulk. Orientational distribution functions of solvent molecules are sharper for smaller ions.

  17. Enslavement in the water body by toxic Aphanizomenon ovalisporum, inducing alkaline phosphatase in phytoplanktons.

    Science.gov (United States)

    Bar-Yosef, Yehonathan; Sukenik, Assaf; Hadas, Ora; Viner-Mozzini, Yehudit; Kaplan, Aaron

    2010-09-14

    The hepatotoxin cylindrospermopsin (CYN) produced by certain cyanobacteria, including Aphanizomenon ovalisporum (hereafter Aphanizomenon) [1], seriously affects lake water quality [2], but its biological role is not known. Strong correlation between Aphanizomenon abundance in Lake Kinneret, Israel, and alkaline phosphatase (APase) activity suggests that inorganic phosphate (Pi) limitation induces the PHO regulon and APase secretion [3]. Staining lake samples with DAPI [4] revealed a high level of polyphosphate bodies (PPB) in Aphanizomenon. Application of enzyme-labeled fluorescence (ELF-APase) [5] showed APase in various organisms, but not in Aphanizomenon. ELF-APase signals and extracellular APase activity in Aphanizomenon were detected only after exploiting PPB under prolonged Pi deprivation in cultures or toward the end of its autumn bloom. Pi deprivation of Aphanizomenon induces CYN production, high-affinity Pi uptake, and an internal, not external, APase. Addition of Aphanizomenon spent media or CYN to various phytoplanktons, including Chlamydomonas reinhardtii, induced genes typically upregulated under Pi limitation and a rise in extracellular APase activity, despite ample surrounding Pi. Coculturing Aphanizomenon with Chlamydomonas or with Debarya sp. showed positive ELF-APase signals, but not in Aphanizomenon. CYN producers promote Pi supply by inducing APase secretion by other phytoplanktons, possibly explaining their increased abundance despite reduced Pi supply from watersheds.

  18. Comparison of liquid hot water and alkaline pretreatments of giant reed for improved enzymatic digestibility and biogas energy production.

    Science.gov (United States)

    Jiang, Danping; Ge, Xumeng; Zhang, Quanguo; Li, Yebo

    2016-09-01

    Liquid hot water (LHW) and alkaline pretreatments of giant reed biomass were compared in terms of digestibility, methane production, and cost-benefit efficiency for electricity generation via anaerobic digestion with a combined heat and power system. Compared to LHW pretreatment, alkaline pretreatment retained more of the dry matter in giant reed biomass solids due to less severe conditions. Under their optimal conditions, LHW pretreatment (190°C, 15min) and alkaline pretreatment (20g/L of NaOH, 24h) improved glucose yield from giant reed by more than 2-fold, while only the alkaline pretreatment significantly (pAlkaline pretreatment achieved 27% higher net electrical energy production than that of non-pretreatment (3859kJ/kg initial total solids), but alkaline liquor reuse is needed for improved net benefit.

  19. Development of conductometric biosensors based on alkaline phosphatases for the water quality control

    OpenAIRE

    2008-01-01

    Researches are focused on the elaboration of enzymatic microconductometric device for heavy metal ions detection in water solutions. The manuscript includes a general introduction, the first chapter contains bibliographic review, the second chapter described the fundamentals of conductometric transducers, the third chapter examining the possibility to create and to optimize conductometric biosensor based on bovine alkaline phosphatase for heavy metals ions detection, the fourth chapter devote...

  20. Stainless steel anodes for alkaline water electrolysis and methods of making

    Science.gov (United States)

    Soloveichik, Grigorii Lev

    2014-01-21

    The corrosion resistance of stainless steel anodes for use in alkaline water electrolysis was increased by immersion of the stainless steel anode into a caustic solution prior to electrolysis. Also disclosed herein are electrolyzers employing the so-treated stainless steel anodes. The pre-treatment process provides a stainless steel anode that has a higher corrosion resistance than an untreated stainless steel anode of the same composition.

  1. Hydroxide Self-Feeding High-Temperature Alkaline Direct Formate Fuel Cells.

    Science.gov (United States)

    Li, Yinshi; Sun, Xianda; Feng, Ying

    2017-03-11

    Conventionally, both the thermal degradation of the anion-exchange membrane and the requirement of additional hydroxide for fuel oxidation reaction hinder the development of the high-temperature alkaline direct liquid fuel cells. The present work addresses these two issues by reporting a polybenzimidazole-membrane-based direct formate fuel cell (DFFC). Theoretically, the cell voltage of the high-temperature alkaline DFFC can be as high as 1.45 V at 90 °C. It has been demonstrated that a proof-of-concept alkaline DFFC without adding additional hydroxide yields a peak power density of 20.9 mW cm(-2) , an order of magnitude higher than both alkaline direct ethanol fuel cells and alkaline direct methanol fuel cells, mainly because the hydrolysis of formate provides enough OH(-) ions for formate oxidation reaction. It was also found that this hydroxide self-feeding high-temperature alkaline DFFC shows a stable 100 min constant-current discharge at 90 °C, proving the conceptual feasibility.

  2. High-Efficiency Artificial Photosynthesis Using a Novel Alkaline Membrane Cell

    Science.gov (United States)

    Narayan, Sri; Haines, Brennan; Blosiu, Julian; Marzwell, Neville

    2009-01-01

    A new cell designed to mimic the photosynthetic processes of plants to convert carbon dioxide into carbonaceous products and oxygen at high efficiency, has an improved configuration using a polymer membrane electrolyte and an alkaline medium. This increases efficiency of the artificial photosynthetic process, achieves high conversion rates, permits the use of inexpensive catalysts, and widens the range of products generated by this type of process. The alkaline membrane electrolyte allows for the continuous generation of sodium formate without the need for any additional separation system. The electrolyte type, pH, electrocatalyst type, and cell voltage were found to have a strong effect on the efficiency of conversion of carbon dioxide to formate. Indium electrodes were found to have higher conversion efficiency compared to lead. Bicarbonate electrolyte offers higher conversion efficiency and higher rates than water solutions saturated with carbon dioxide. pH values between 8 and 9 lead to the maximum values of efficiency. The operating cell voltage of 2.5 V, or higher, ensures conversion of the carbon dioxide to formate, although the hydrogen evolution reaction begins to compete strongly with the formate production reaction at higher cell voltages. Formate is produced at indium and lead electrodes at a conversion efficiency of 48 mg of CO2/kilojoule of energy input. This efficiency is about eight times that of natural photosynthesis in green plants. The electrochemical method of artificial photosynthesis is a promising approach for the conversion, separation and sequestration of carbon dioxide for confined environments as in space habitats, and also for carbon dioxide management in the terrestrial context. The heart of the reactor is a membrane cell fabricated from an alkaline polymer electrolyte membrane and catalyst- coated electrodes. This cell is assembled and held in compression in gold-plated hardware. The cathode side of the cell is supplied with carbon

  3. Alkaline pretreatment and the synergic effect of water and tetralin enhances the liquefaction efficiency of bagasse.

    Science.gov (United States)

    Li, Zhixia; Cao, Jiangfei; Huang, Kai; Hong, Yaming; Li, Cunlong; Zhou, Xinxin; Xie, Ning; Lai, Fang; Shen, Fang; Chen, Congjin

    2015-02-01

    Bagasse liquefaction (BL) in water, tetralin, and water/tetralin mixed solvents (WTMS) was investigated, and effects of tetralin content in WTMS, temperature, and alkaline pretreatment of bagasse on liquefaction efficiency were studied. At 300°C, bagasse conversion in WTMS with tetralin content higher than 50 wt% was 86-87 wt%, whereas bagasse conversion in water or tetralin was 67 wt% or 84 wt%, respectively. Because the solid conversion from liquefaction in WTMS with tetralin content higher than 50 wt% was always higher than that in water or tetralin at temperatures between 250 and 300°C, a synergic effect between water and tetralin is suggested. Alkaline pretreatment of bagasse resulted in significantly higher conversion and heavy oil yield from BL in water or WTMS. The effect of deoxygenation by the present liquefaction method is demonstrated by lower oxygen contents (16.01-19.59 wt%) and higher heating values (31.9-34.8 MJ/kg) in the produced oils.

  4. Alkaline water electrolysis technology for Space Station regenerative fuel cell energy storage

    Science.gov (United States)

    Schubert, F. H.; Hoberecht, M. A.; Le, M.

    1986-01-01

    The regenerative fuel cell system (RFCS), designed for application to the Space Station energy storage system, is based on state-of-the-art alkaline electrolyte technology and incorporates a dedicated fuel cell system (FCS) and water electrolysis subsystem (WES). In the present study, emphasis is placed on the WES portion of the RFCS. To ensure RFCS availability for the Space Station, the RFCS Space Station Prototype design was undertaken which included a 46-cell 0.93 cu m static feed water electrolysis module and three integrated mechanical components.

  5. Separating hydrogen and oxygen evolution in alkaline water electrolysis using nickel hydroxide.

    Science.gov (United States)

    Chen, Long; Dong, Xiaoli; Wang, Yonggang; Xia, Yongyao

    2016-05-20

    Low-cost alkaline water electrolysis has been considered a sustainable approach to producing hydrogen using renewable energy inputs, but preventing hydrogen/oxygen mixing and efficiently using the instable renewable energy are challenging. Here, using nickel hydroxide as a redox mediator, we decouple the hydrogen and oxygen production in alkaline water electrolysis, which overcomes the gas-mixing issue and may increase the use of renewable energy. In this architecture, the hydrogen production occurs at the cathode by water reduction, and the anodic Ni(OH)2 is simultaneously oxidized into NiOOH. The subsequent oxygen production involves a cathodic NiOOH reduction (NiOOH→Ni(OH)2) and an anodic OH(-) oxidization. Alternatively, the NiOOH formed during hydrogen production can be coupled with a zinc anode to form a NiOOH-Zn battery, and its discharge product (that is, Ni(OH)2) can be used to produce hydrogen again. This architecture brings a potential solution to facilitate renewables-to-hydrogen conversion.

  6. Separating hydrogen and oxygen evolution in alkaline water electrolysis using nickel hydroxide

    Science.gov (United States)

    Chen, Long; Dong, Xiaoli; Wang, Yonggang; Xia, Yongyao

    2016-05-01

    Low-cost alkaline water electrolysis has been considered a sustainable approach to producing hydrogen using renewable energy inputs, but preventing hydrogen/oxygen mixing and efficiently using the instable renewable energy are challenging. Here, using nickel hydroxide as a redox mediator, we decouple the hydrogen and oxygen production in alkaline water electrolysis, which overcomes the gas-mixing issue and may increase the use of renewable energy. In this architecture, the hydrogen production occurs at the cathode by water reduction, and the anodic Ni(OH)2 is simultaneously oxidized into NiOOH. The subsequent oxygen production involves a cathodic NiOOH reduction (NiOOH-->Ni(OH)2) and an anodic OH- oxidization. Alternatively, the NiOOH formed during hydrogen production can be coupled with a zinc anode to form a NiOOH-Zn battery, and its discharge product (that is, Ni(OH)2) can be used to produce hydrogen again. This architecture brings a potential solution to facilitate renewables-to-hydrogen conversion.

  7. Facile synthesis of water-soluble carbon nano-onions under alkaline conditions

    Directory of Open Access Journals (Sweden)

    Gaber Hashem Gaber Ahmed

    2016-05-01

    Full Text Available Carbonization of tomatoes at 240 °C using 30% (w/v NaOH as catalyst produced carbon onions (C-onions, while solely carbon dots (C-dots were obtained at the same temperature in the absence of the catalyst. Other natural materials, such as carrots and tree leaves (acer saccharum, under the same temperature and alkaline conditions did not produce carbon onions. XRD, FTIR, HRTEM, UV–vis spectroscopy, and photoluminescence analyses were performed to characterize the as-synthesized carbon nanomaterials. Preliminary tests demonstrate a capability of the versatile materials for chemical sensing of metal ions. The high content of lycopene in tomatoes may explain the formation of C-onions in alkaline media and a possible formation mechanism for such structures was outlined.

  8. Facile synthesis of water-soluble carbon nano-onions under alkaline conditions.

    Science.gov (United States)

    Ahmed, Gaber Hashem Gaber; Laíño, Rosana Badía; Calzón, Josefa Angela García; García, Marta Elena Díaz

    2016-01-01

    Carbonization of tomatoes at 240 °C using 30% (w/v) NaOH as catalyst produced carbon onions (C-onions), while solely carbon dots (C-dots) were obtained at the same temperature in the absence of the catalyst. Other natural materials, such as carrots and tree leaves (acer saccharum), under the same temperature and alkaline conditions did not produce carbon onions. XRD, FTIR, HRTEM, UV-vis spectroscopy, and photoluminescence analyses were performed to characterize the as-synthesized carbon nanomaterials. Preliminary tests demonstrate a capability of the versatile materials for chemical sensing of metal ions. The high content of lycopene in tomatoes may explain the formation of C-onions in alkaline media and a possible formation mechanism for such structures was outlined.

  9. Preparation of anion exchange membrane using polyvinyl chloride (PVC) for alkaline water electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Hwang, Gab-Jin; Bong, Soo-Yeon; Ryu, Cheol-Hwi [Hoseo University, Asan (Korea, Republic of); Lim, Soo-Gon [Energy and Machinery Korea Co., Ltd., Changwon (Korea, Republic of); Choi, Ho-Sang [Kyungil University, Gyeongsan (Korea, Republic of)

    2015-09-15

    An anion exchange membrane was prepared by the chloromethylation and the amination of polyvinyl chloride (PVC), as the base polymer. The membrane properties of the prepared anion exchange membrane, including ionic conductivity, ion exchange capacity, and water content were measured. The ionic conductivity of the prepared anion exchange membrane was in the range of 0.098x10{sup -2} -7.0x10{sup -2}S cm{sup -1}. The ranges of ion exchange capacity and water content were 1.9-3.7meq./g-dry-membrane and 35.1-63.1%, respectively. The chemical stability of the prepared anion exchange membrane was tested by soaking in 30 wt% KOH solution to determine its availability as a separator in the alkaline water electrolysis. The ionic conductivity during the chemical stability test largely did not change.

  10. Alkali doped poly (2,5-benzimidazole) membrane for alkaline water electrolysis: Characterization and performance

    Science.gov (United States)

    Diaz, Liliana A.; Hnát, Jaromír; Heredia, Nayra; Bruno, Mariano M.; Viva, Federico A.; Paidar, Martin; Corti, Horacio R.; Bouzek, Karel; Abuin, Graciela C.

    2016-04-01

    The properties and performance of linear and cross-linked KOH doped ABPBI membranes as electrolyte/separator for zero gap alkaline water electrolysis cells are evaluated and compared with a commercial Zirfon® diaphragm. Stability in alkaline environment, swelling, thermal properties, water sorption, KOH uptake and conductivity of linear (L-ABPBI) and cross-linked (C-ABPBI) membranes doped with different concentrations of KOH are analyzed. Linear membranes show stability up to 3.0 mol·dm-3 KOH doping, while cross-linked membranes are stable up to 4.2 mol·dm-3 KOH doping. Both kinds of membranes exhibit good thermal stability and reasonable specific ionic conductivity at 22 °C in the range between 7 and 25 mS·cm-1, being slightly higher the conductivity of C-ABPBI membranes than that of L-ABPBI ones. In short-term electrolysis tests both L-ABPBI and C-ABPBI membranes show better performance than Zirfon diaphragm in the range from 50 to 70 °C. A current density of 335 mA·cm-2 at a cell voltage of 2.0 V is attained with C-ABPBI membranes doped in 3 mol·dm-3 KOH at 70 °C, a performance comparable with that of commercial units operating at temperatures ca. 80 °C and 30 wt% KOH (6.7 mol·dm-3) as electrolyte.

  11. Shifts in leaf N:P stoichiometry during rehabilitation in highly alkaline bauxite processing residue sand.

    Science.gov (United States)

    Goloran, Johnvie B; Chen, Chengrong; Phillips, Ian R; Elser, James J

    2015-10-07

    Large quantities of sodic and alkaline bauxite residue are produced globally as a by-product from alumina refineries. Ecological stoichiometry of key elements [nitrogen (N) and phosphorus (P)] plays a critical role in establishing vegetation cover in bauxite residue sand (BRS). Here we examined how changes in soil chemical properties over time in rehabilitated sodic and alkaline BRS affected leaf N to P stoichiometry of native species used for rehabilitation. Both Ca and soil pH influenced the shifts in leaf N:P ratios of the study species as supported by consistently significant positive relationships (P stoichiometry can effectively provide a meaningful assessment on understanding nutrient limitation and productivity of native species used for vegetating highly sodic and alkaline BRS, and is a crucial indicator for assessing ecological rehabilitation performance.

  12. Oxygen evolution reaction characteristics of synthetic nickel-cobalt-oxide electrodes for alkaline anion-exchange membrane water electrolysis

    Science.gov (United States)

    Koo, Tae Woo; Park, ChanSu; Kim, Yang Do; Lee, Dooyong; Park, Sungkyun; Lee, Jae Ho; Choi, Sung Mook; Choi, Chul Young

    2015-11-01

    A polymer electrolyte membrane water electrolysis system can produce high-purity hydrogen gases in a highly efficient manner. However, the level of hydrogen gas production is still small. In addition, noble-metal catalysts for the reaction in acidic environments, as well as an additional drying step to remove water contained in the hydrogen, are required. Therefore, water electrolysis system with high efficiency and lower cost, an alkaline anion-exchange membrane system that can produce high-purity hydrogen without a noble-metal catalyst, is needed. Nano-size NiCo2O4 powders were prepared by using a sol-gel method to achieve an efficient and economical water electrolysis system. When the powder was calcined at 450 °C, the crystallinity and the cyclic voltammogram measurement showed the best values. In addition, the 15-wt.% polytetrafluoroethylene mixed NiCo2O4 powders exhibited the largest cyclic voltammetry active area and the highest oxygen evolution reaction activity with the appropriate stability.

  13. Combination of Successive Alkalinity Producing System (SAPS) and Aeration for Passive Treatment of Highly Acidic Mine Drainage

    Science.gov (United States)

    Oh, C.; Ji, S.

    2015-12-01

    Passive treatment system has been widely used for remediation of mine drainage since its advantage of low installation and maintenance cost. The system, however, has also a disadvantage in assuring remediation and management efficiency if the drainage is highly acidic mine drainage. To remediate acid mine drainage (AMD) especially showing high acidity, passive treatment system which consists of successive alkalinity producing system (SAPS) and subsequent aeration pond was proposed and its mechanisms and efficiency was evaluated in this research. Target AMD was obtained from Waryong coal mine and showed typical characteristics of AMD having high metal concentration and low pH (acidity > 300 mg/L as CaCO3). Four experimental cases were conducted; untreated, treated with SAPS, treated with aeration, treated with SAPS and aeration to compare role and mechanism of each unit. Between organic matter and limestone layer which constitute SAPS, the former eliminated most of Fe(III) and Al in the AMD so that the latter was kept from being clogged by precipitates. Net acidity of the AMD rapidly decreased by supplement of alkalinity at the limestone layer. A primary function of SAPS, producing alkalinity constantly without clogging, was attained due to addition a portion of limestone particle into the organic matter layer. The discharge from SAPS had low ORP and DO values because of an anaerobic environment formed at the organic matter layer although its alkalinity was increased. This water quality was unfavorable for Fe(II) to be oxidized. Installation of aeration pond after SAPS, therefore, could be effective way of enhancing oxidation rate of Fe(II). Among the experimental cases, the combination of SAPS and aeration pond was only able to remediate the AMD. This concluded that to remediate highly acidic mine drainage with passive treatment system, three critical conditions were required; pre-precipitation of Fe(III) and Al at organic matter layer in SAPS, constant alkalinity

  14. Fabrication and evaluation of nickel cobalt alloy electrocatalysts for alkaline water splitting

    Energy Technology Data Exchange (ETDEWEB)

    Hong, Sung Hoon [School of Integrative Engineering, Chung-Ang University, Heukseokno 84, Dongjak-gu, Seoul 156-756 (Korea, Republic of); Ahn, Sang Hyun; Choi, Insoo [Fuel Cell Research Center, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Pyo, Sung Gyu [School of Integrative Engineering, Chung-Ang University, Heukseokno 84, Dongjak-gu, Seoul 156-756 (Korea, Republic of); Kim, Hyoung-Juhn; Jang, Jong Hyun [Fuel Cell Research Center, Korea Institute of Science and Technology, Hwarangno 14-gil 5, Seongbuk-gu, Seoul 136-791 (Korea, Republic of); Kim, Soo-Kil, E-mail: sookilkim@cau.ac.kr [School of Integrative Engineering, Chung-Ang University, Heukseokno 84, Dongjak-gu, Seoul 156-756 (Korea, Republic of)

    2014-07-01

    As a catalyst for the hydrogen evolution reaction (HER) in alkaline water splitting, NiCo alloys of various compositions were prepared through electrodeposition onto Cu substrates. The composition of each alloy catalyst was varied by controlling the molar ratio of Co{sup 2+} ions in the electrolyte. With an increase in the Co content, the morphologies of the NiCo alloys were progressively changed from a round to polygonal shape. The NiCo alloys all exhibited a Ni rich surface, as confirmed by the bulk-to-surface compositional ratio and degree of alloying. The catalytic activities of the NiCo alloys toward the HER of water splitting were electrochemically tested in a KOH electrolyte, and the specific activities were characterized by considering the electrochemical surface areas of Ni and Co. The effect of alloying was demonstrated to be a significant enhancement of HER activity, resulting from a change in the electronic structures of Ni and Co.

  15. High Temperature Alkaline Electrolysis Cells with Metal Foam Based Gas Diffusion Electrodes

    DEFF Research Database (Denmark)

    Chatzichristodoulou, Christodoulos; Allebrod, Frank; Mogensen, Mogens Bjerg

    2016-01-01

    Alkaline electrolysis cells operating at 250°C and 40 bar are able to convert electrical energy into hydrogen at very high efficiencies and power densities. In the present work we demonstrate the application of a PTFE hydrophobic network and Ag nanowires as oxygen evolution electrocatalyst...

  16. Critical parameters in cost-effective alkaline extraction for high protein yield from leaves

    NARCIS (Netherlands)

    Zhang, C.; Sanders, J.P.M.; Bruins, M.E.

    2014-01-01

    Leaves are potential resources for feed or food, but their applications are limited due to a high proportion of insoluble protein and inefficient processing. To overcome these problems, parameters of alkaline extraction were evaluated using green tea residue (GTR). Protein extraction could be maximi

  17. Effects of overlying water aeration on phosphorus fractions and alkaline phosphatase activity in surface sediment

    Institute of Scientific and Technical Information of China (English)

    Jianjun Chen; Shaoyong Lu; Yikun Zhao; Wei Wang; Minsheng Huang

    2011-01-01

    Microbial activity may influence phosphorus (P) deposit and release at the water sediment interface.The properties of DO (dissolved oxygen), pH, P fractions (TP, Ca-P, Fe-P, OP, IP), and APA (alkaline phosphatase activity) at the water sediment interface were measured to investigate microbial activity variations in surface sediment under conditions of two-month intermittent aeration in overlying water.Results showed that DO and TP of overlying water increased rapidly in the first week and then decreased gradually after 15 day of intermittent aeration.Microorganism metabolism in surface sediment increased pH and decreased DO and TP in the overlying water.After two-month intermittent aeration, APA and OP from surface sediment (0-2 crm) were both significantly higher than those from bottom sediment (6-8 cm) (p < 0.05), and surface sediment Fe-P was transferred to OP during the course of microorganism reproduction on the surface sediment.These results suggest that microbial activity and microorganism biomass from the surface sediment were higher than those from bottom sediment afar two-month intermittent aeration in the overlying water.

  18. Enhanced decomposition of 1,4-dioxane in water by ozonation under alkaline condition.

    Science.gov (United States)

    Tian, Gui-Peng; Wu, Qian-Yuan; Li, Ang; Wang, Wen-Long; Hu, Hong-Ying

    2014-01-01

    1,4-Dioxane is a probable human carcinogenic and refractory substance that is widely detected in aquatic environments. Traditional wastewater treatment processes, including activated sludge, cannot remove 1,4-dioxane. Removing 1,4-dioxane with a reaction kinetic constant of 0.32 L/(mol·s) by using ozone, a strong oxidant, is difficult. However, under alkaline environment, ozone generates a hydroxyl radical (•OH) that exhibits strong oxidative potential. Thus, the ozonation of 1,4-dioxane in water under different pH conditions was investigated in this study. In neutral solution, with an inlet ozone feed rate of 0.19 mmol/(L·min), the removal efficiency of 1,4-dioxane was 7.6% at 0.5 h, whereas that in alkaline solution was higher (16.3-94.5%) within a pH range of 9-12. However, the removal efficiency of dissolved organic carbon was considerably lower than that of 1,4-dioxane. This result indicates that several persistent intermediates were generated during 1,4-dioxane ozonation. The pseudo first-order reaction further depicted the reaction of 1,4-dioxane. The obvious kinetic constants (kobs) at pH 9, 10, 11 and 12 were 0.94, 2.41, 24.88 and 2610 L/(mol·s), respectively. Scavenger experiments on radical species indicated that •OH played a key role in removing 1,4-dioxane during ozonation under alkaline condition.

  19. Mathematical model of water transport in Bacon and alkaline matrix-type hydrogen-oxygen fuel cells

    Science.gov (United States)

    Prokopius, P. R.; Easter, R. W.

    1972-01-01

    Based on general mass continuity and diffusive transport equations, a mathematical model was developed that simulates the transport of water in Bacon and alkaline-matrix fuel cells. The derived model was validated by using it to analytically reproduce various Bacon and matrix-cell experimental water transport transients.

  20. The MCVD synthesis and characterization of water tolerant fiber optic waveguides based on alkaline earth-doped silicas

    Science.gov (United States)

    Farley, Kevin F.

    Optical fibers that transmit throughout the entire telecommunications spectrum (1.2--1.7 mum) are presently manufactured by the removal of hydrogen or OH from the host preform glass. Hydrogen-oxygen torches are utilized in the conventional preform manufacturing process, but result in the formation of hydroxyls in germanium-doped silica fiber. The hydroxyl species generate unacceptably high losses for long haul telecommunications systems. This thesis has explored an alternative strategy for reducing OH-related absorption in silica-based glasses. Alkaline earth modifiers have been introduced via the modified chemical vapor deposition (MCVD) process to successfully damp out and dramatically reduce the extrinsic attenuation associated with both water and hydrogen. Specifically, alkaline earth ions were introduced into alumino-silicate glasses to form MgO-Al2O3-SiO2, CaO-Al 2O3-SiO2, and SrO-Al2O3-SiO 2 compositions. The utilization of halide precursors based on the vapor delivery of rare earths was incorporated into the existing MCVD set-up to fabricate these optical preforms. Both the bulk preforms and fibers drawn from them were characterized to determine relevant optical properties, including the attenuation, index profiles and extinction coefficients arising from OH in each host. The data indicate that modification of the silica glass structure through the additions of modifying ions can significantly reduce OH related absorption. For example, the doping of alkaline earth ions decreased the extinction coefficient measured at the 1.39 mum) OH overtone, to values reinforced by a series of experiments documenting their resistance to hydrogen induced losses.

  1. Distribution of total alkalinity and pH in the Ross Sea (Antarctica waters during austral summer 2008

    Directory of Open Access Journals (Sweden)

    Paola Rivaro

    2014-10-01

    Full Text Available Measurements of total alkalinity (AT and pH were made in the Ross Sea in January–February 2008 in order to characterize the carbonate system in the Ross Sea and to evaluate the variability associated with different water masses. The main water masses of the Ross Sea, Antarctic Surface Water, High Salinity Shelf Water (HSSW, Deep Ice Shelf Water, Circumpolar Deep Water (CDW and Antarctic Bottom Water, were identified on the basis of the physical and chemical data. In particular, the AT ranged between 2275 and 2374 µmol kg−1 with the lowest values in the surface waters (2275–2346 µmol kg−1, where the influence of the sea-ice melting and of the variability of the physical properties was significant. In the deep layers of the water column, the AT maxima were measured in correspondence to the preferential pathways of the spreading HSSW. The pH had variable values in the surface layer (7.890–8.033 with the highest values in Terra Nova Bay and Ross Sea polynyas. A low pH (7.969±0.025 traced the intrusion of the CDW in the Ross Sea shelf area. All samples revealed waters that were oversaturated with respect to both calcite and aragonite, but near corrosive levels of aragonite saturation state (Ω ca. 1.1–1.2 were associated with the entrainment of CDW over the slope. Aragonite undersaturation is of particular concern for the zooplankton species comprising to calcifying organisms such as pteropods. The partial pressure of CO2 at the sea surface was undersaturated with respect to the atmospheric value, particularly in Terra Nova Bay and the Ross Sea polynyas, but a large variability in the sea–air CO2 fluxes was observed associated with different responses in the strength of the biological and physical processes.

  2. An amorphous CoSe film behaves as an active and stable full water-splitting electrocatalyst under strongly alkaline conditions.

    Science.gov (United States)

    Liu, Tingting; Liu, Qian; Asiri, Abdullah M; Luo, Yonglan; Sun, Xuping

    2015-12-01

    It is attractive but still remains a big challenge to develop non-noble metal bifunctional electrocatalysts efficient for both oxygen evolution reaction (OER) and hydrogen evolution reaction (HER) under alkaline conditions. Herein, an amorphous CoSe film electrodeposited on a Ti mesh (a-CoSe/Ti) is demonstrated to exhibit high electrocatalytic activity and stability for both reactions in 1.0 M KOH. It needs overpotentials of 292 and 121 mV to drive 10 mA cm(-2) for OER and HER, respectively. The two-electrode alkaline water electrolyzer affords a water-splitting current of 10 mA cm(-2) at a cell voltage of 1.65 V. This work offers an attractive cost-effective catalytic material toward full water splitting applications.

  3. Methods of analysis by the U.S. Geological Survey National Water Quality Laboratory : evaluation of alkaline persulfate digestion as an alternative to Kjeldahl digestion for determination of total and dissolved nitrogen and phosphorus in water

    Science.gov (United States)

    Patton, Charles J.; Kryskalla, Jennifer R.

    2003-01-01

    Alkaline persulfate digestion was evaluated and validated as a more sensitive, accurate, and less toxic alternative to Kjeldahl digestion for routine determination of nitrogen and phosphorus in surface- and ground-water samples in a large-scale and geographically diverse study conducted by U.S. Geological Survey (USGS) between October 1, 2001, and September 30, 2002. Data for this study were obtained from about 2,100 surface- and ground-water samples that were analyzed for Kjeldahl nitrogen and Kjeldahl phosphorus in the course of routine operations at the USGS National Water Quality Laboratory (NWQL). These samples were analyzed independently for total nitrogen and total phosphorus using an alkaline persulfate digestion method developed by the NWQL Methods Research and Development Program. About half of these samples were collected during nominally high-flow (April-June) conditions and the other half were collected during nominally low-flow (August-September) conditions. The number of filtered and whole-water samples analyzed from each flow regime was about equal.By operational definition, Kjeldahl nitrogen (ammonium + organic nitrogen) and alkaline persulfate digestion total nitrogen (ammonium + nitrite + nitrate + organic nitrogen) are not equivalent. It was necessary, therefore, to reconcile this operational difference by subtracting nitrate + nitrite concentra-tions from alkaline persulfate dissolved and total nitrogen concentrations prior to graphical and statistical comparisons with dissolved and total Kjeldahl nitrogen concentrations. On the basis of two-population paired t-test statistics, the means of all nitrate-corrected alkaline persulfate nitrogen and Kjeldahl nitrogen concentrations (2,066 paired results) were significantly different from zero at the p = 0.05 level. Statistically, the means of Kjeldahl nitrogen concentrations were greater than those of nitrate-corrected alkaline persulfate nitrogen concentrations. Experimental evidence strongly

  4. Microbial communities associated with the anthropogenic, highly alkaline environment of a saline soda lime, Poland.

    Science.gov (United States)

    Kalwasińska, Agnieszka; Felföldi, Tamás; Szabó, Attila; Deja-Sikora, Edyta; Kosobucki, Przemysław; Walczak, Maciej

    2017-07-01

    Soda lime is a by-product of the Solvay soda process for the production of sodium carbonate from limestone and sodium chloride. Due to a high salt concentration and alkaline pH, the lime is considered as a potential habitat of haloalkaliphilic and haloalkalitolerant microbial communities. This artificial and unique environment is nutrient-poor and devoid of vegetation, due in part to semi-arid, saline and alkaline conditions. Samples taken from the surface layer of the lime and from the depth of 2 m (both having pH ~11 and ECe up to 423 dS m(-1)) were investigated using culture-based (culturing on alkaline medium) and culture-independent microbiological approaches (microscopic analyses and pyrosequencing). A surprisingly diverse bacterial community was discovered in this highly saline, alkaline and nutrient-poor environment, with the bacterial phyla Proteobacteria (representing 52.8% of the total bacterial community) and Firmicutes (16.6%) showing dominance. Compared to the surface layer, higher bacterial abundance and diversity values were detected in the deep zone, where more stable environmental conditions may occur. The surface layer was dominated by members of the genera Phenylobacterium, Chelativorans and Skermanella, while in the interior layer the genus Fictibacillus was dominant. The culturable aerobic, haloalkaliphilic bacteria strains isolated in this study belonged mostly to the genus Bacillus and were closely related to the species Bacillus pseudofirmus, B. cereus, B. plakortidis, B. thuringensis and B. pumilus.

  5. Effect of Strongly Alkaline Electrolyzed Water on Silk Degumming and the Physical Properties of the Fibroin Fiber.

    Directory of Open Access Journals (Sweden)

    Ting-Ting Cao

    Full Text Available Strongly alkaline electrolyzed water (SAEW was prepared by electrolysis of tap water in a laboratory-made water electrolyzer. The pH of stored SAEW was stable for more than one month. The hardness of the electrolyzed water was 30% lower and the Na(+ concentration was 18% higher than those of the tap water. Silkworm cocoon shells were boiled in pH 11.50 SAEW at a ratio of 1∶40∼80 (W/V for 20 min and the sericin layers around the silk fibroin fibers were removed completely. The tensile properties and thermal decomposition temperature of a single filament of silk fibroin obtained by the SAEW method were almost the same as those for the fiber obtained by the neutral soap, and much higher than those for the fiber obtained by Na2CO3 degumming. The results demonstrate that SAEW is an environmentally friendly and pollution-free silk degumming agent that allows highly efficient, low cost recovery of sericin.

  6. Oxidative Alkaline leaching of Americium from simulated high-level nuclear waste sludges

    Energy Technology Data Exchange (ETDEWEB)

    Reed, Wendy A.; Garnov, Alexander Yu.; Rao, Linfeng; Nash, Kenneth L.; Bond, Andrew H.

    2004-01-23

    Oxidative alkaline leaching has been proposed to pre-treat the high-level nuclear waste sludges to remove some of the problematic (e.g., Cr) and/or non-radioactive (e.g., Na, Al) constituents before vitrification. It is critical to understand the behavior of actinides, americium and plutonium in particular, in oxidative alkaline leaching. We have studied the leaching behavior of americium from four different sludge simulants (BiPO{sub 4}, BiPO{sub 4 modified}, Redox, PUREX) using potassium permanganate and potassium persulfate in alkaline solutions. Up to 60% of americium sorbed onto the simulants is leached from the sludges by alkaline persulfate and permanganate. The percentage of americium leached increases with [NaOH] (between 1.0 and 5.0 M). The initial rate of americium leaching by potassium persulfate increases in the order BiPO{sub 4} sludge < Redox sludge < PUREX sludge. The data are most consistent with oxidation of Am{sup 3+} in the sludge to either AmO{sub 2}{sup +} or AmO{sub 2}{sup 2+} in solution. Though neither of these species is expected to exhibit long-term stability in solution, the potential for mobilization of americium from sludge samples would have to be accommodated in the design of any oxidative leaching process for real sludge samples.

  7. Electrochemical Deposition and Characterization of Ni-Mo Alloys as Cathode for Alkaline Water Electrolysis

    Science.gov (United States)

    Manazoğlu, Mert; Hapçı, Gökçe; Orhan, Gökhan

    2016-01-01

    In this study, Ni-Mo alloy coatings were electrochemically deposited on a copper plate in citrate solutions. The effects of Ni/Mo mole ratio in the electrolyte and pH value on hydrogen evolution reaction (HER) as well as the electrochemical stability were investigated in the alkaline solution for electrodeposited NiMo. The electrocatalytic activity of the fabricated NiMo alloys for HER in alkaline solutions was investigated by the polarization measurements and electrochemical impedance spectroscopy techniques. The morphology and chemical composition of the electrodeposited Ni-Mo were investigated using SEM and EDS analyses. It was found that NiMo electrode with the highest molybdenum content (ca. 38 wt.%) and high surface area show high electrocatalytic activity in the HER. This was produced from a bath with a pH of 9.5, Ni/Mo ratio of 1/10 and 0.5 M sodium citrate concentration. The stability of this coating was tested by polarization measurements after different anodic and cathodic treatment in 1 M NaOH solution. The open circuit potential ( E ocp) of the electrode as a function of immersion time was also measured.

  8. Improvement in the solid-state alkaline fuel cell performance through efficient water management strategies

    Science.gov (United States)

    Oshiba, Yuhei; Hiura, Junya; Suzuki, Yuto; Yamaguchi, Takeo

    2017-03-01

    In solid-state alkaline fuel cells (SAFCs), water is generated at the anode and is reacted at the cathode; as such, flooding occurs much more easily at the anode than it does in proton-exchange membrane fuel cells (PEMFCs). Anode flooding is a reason for the low performance of SAFCs, and so it is important that this flooding phenomenon is mitigated. In this study, we control water transport to suppress anode flooding. We do this through two approaches: changing the thickness of the anion exchange membrane (AEM) and changing the anode flow rate. Among two AEMs with two different thicknesses (27 μm and 6 μm) prepared, thinner AEM shows improved fuel cell performance. Increasing the anode flow rate also improved the performance of SAFCs. To find out what caused this, the water transport inside the membrane electrode assembly (MEA) was analyzed. The flooding region was estimated using calculated relative humidity at anode outlet. On the basis of our experimental and calculation approaches, flooding can be suppressed by using thin AEMs and increasing the anode flow rate.

  9. Optimization of Gas-Water Absorption Equilibrium of Carbon Dioxide for Algae Liquors: Selection of Alkaline Buffering Chemicals

    Directory of Open Access Journals (Sweden)

    Wen-Hsi Cheng

    2016-01-01

    Full Text Available The apparent Henry’s Law constant (H′, which quantifies the concentration partition of a gas-liquid equilibrium of carbon dioxide (CO2, is used to optimize the absorption of carbon dioxide in algae liquors. The values of H′ were examined under various conditions: in water at different temperatures (27 and 37°C, in alkaline buffering chemicals (sodium hydroxide (NaOH and sodium carbonate (Na2CO3, and in aquatic algae plants (Egeria densa and Anubias barteri nana. The optimal conditions for CO2 absorption can be obtained by controlling the aqueous pH values (around weak alkalinity with pH 9-10 using sodium carbonate as an alkaline buffering chemical at 27°C, yielding exact H′ values of around 16.3–21.3 atm/M, which were obtained from the mean gaseous CO2 concentration of 803 ppm and the total aqueous carbonate concentration of 4.085 mg/L. The experimental results reveal that an alkaline buffering compound, sodium carbonate, can be added to water to maintain a constant aqueous alkalinity enough for the fixation of carbon dioxide by the photosynthesis of green algae in a photobioreactor.

  10. A facile chemical route for recovery of high quality zinc oxide nanoparticles from spent alkaline batteries.

    Science.gov (United States)

    Deep, Akash; Sharma, Amit L; Mohanta, Girish C; Kumar, Parveen; Kim, Ki-Hyun

    2016-05-01

    Recycling of spent domestic batteries has gained a great environmental significance. In the present research, we propose a new and simple technique for the recovery of high-purity zinc oxide nanoparticles from the electrode waste of spent alkaline Zn-MnO2 batteries. The electrode material was collected by the manual dismantling and mixed with 5M HCl for reaction with a phosphine oxide reagent Cyanex 923® at 250°C for 30min. The desired ZnO nanoparticles were restored from the Zn-Cyanex 923 complex through an ethanolic precipitation step. The recovered particle product with about 5nm diameter exhibited fluorescent properties (emission peak at 400nm) when excited by UV radiation (excitation energy of 300nm). Thus, the proposed technique offered a simple and efficient route for recovering high purity ZnO nanoparticles from spent alkaline batteries.

  11. Managing land application of coal seam water: A field study of land amendment irrigation using saline-sodic and alkaline water on a Red Vertisol.

    Science.gov (United States)

    Bennett, J McL; Marchuk, A; Raine, S R; Dalzell, S A; Macfarlane, D C

    2016-12-15

    Coal seam (CS) gas operations coproduce water with gas from confined CS aquifers. This CS water represents a potential agricultural resource if the water is able to be chemically amended to comply with management guidelines. Stoichiometric quantities of sulphur and gypsum amendments can be used to neutralise the alkalinity and reduce the sodicity of CS water respectively. These amendments can either be mixed in-line at a water treatment plant or applied directly to land prior to the application of CS water (a practice termed land amendment irrigation - LAI). This study compared the efficacy of LAI with in-line chemical amendment of CS water and irrigation with non-saline, non-sodic and non-alkaline (good quality) water under field conditions in southern Queensland. Soil chemical properties, soluble Ca, Mg, K, Na, electrical conductivity (EC), pH, chloride and alkalinity, as well as saturated hydraulic conductivity were measured to determine the impact of the irrigation treatments on soil chemical and physical conditions. Irrigation of lucerne pasture using solid-set sprinklers applied a total of 6.7 ML/ha of each treatment irrigation water to the experimental plots over a 10-month period. Alkalinity was neutralised using LAI, with no increase in soil alkalinity observed. Soil sodicity did not exceed threshold electrolyte concentration values under either CS water irrigation treatment. Soil chemical and physical properties were comparable for both LAI and in-line chemical amendment of CS water. Soil saturated hydraulic conductivity was maintained under all irrigation treatments. Results showed that the constrained capacity of the irrigation system was unable to meet crop evapotranspiration demand. This resulted in accumulation of salt within the root-zone under the CS water treatments compared to the good quality water treatment. LAI successfully chemically amended Bowen Basin CS water facilitating its beneficial use for agricultural irrigation. Copyright © 2016

  12. Bifunctional enhancement of oxygen reduction reaction activity on Ag catalysts due to water activation on LaMnO3 supports in alkaline media.

    Science.gov (United States)

    Park, Shin-Ae; Lee, Eun-Kyung; Song, Hannah; Kim, Yong-Tae

    2015-08-27

    Ag is considered to be one of the best candidates for oxygen reduction reaction electrocatalysts in alkaline media for application in various electrochemical energy devices. In this study, we demonstrate that water activation is a key factor in enhancing the ORR activity in alkaline media, unlike in acid environments. Ag supported on LaMnO3 having a high oxophilicity showed a markedly higher ORR activity than that on carbon with inert surfaces. Through various electrochemical tests, it was revealed that the origin of the enhanced ORR activity of Ag/LaMnO3 is the bifunctional effect mainly due to the water activation at the interface between Ag and LaMnO3. Furthermore, the ligand effect due to the charge transfer from Mn to Ag leads to the enhancement of both oxygen activation on Ag and water activation on Mn sites, and hence, an improvement in the ORR activity of Ag/LaMnO3. On the other hand, the strain effect based on the fine structure variation in the lattice was negligible. We therefore suggest that the employment of a co-catalyst or support with highly oxophilic nature and the maximization of the interface between catalyst and support should be considered in the design of electrocatalysts for the ORR in alkaline media.

  13. Batch and column adsorption of herbicide fluroxypyr on different types of activated carbons from water with varied degrees of hardness and alkalinity.

    Science.gov (United States)

    Pastrana-Martínez, L M; López-Ramón, M V; Fontecha-Cámara, M A; Moreno-Castilla, C

    2010-02-01

    There has been little research into the effects of the water hardness and alkalinity of surface waters on the adsorption of herbicides on activated carbons. The aim of this study was to determine the influence of these water characteristics on fluroxypyr adsorption on different activated carbons. At low fluroxypyr surface concentrations, the amount adsorbed from distilled water was related to the surface hydrophobicity. Surface area of carbons covered by fluroxypyr molecules ranged from 60 to 65%. Variations in fluroxypyr solubility with water hardness and alkalinity showed a salting-in effect. Calcium, magnesium and bicarbonate ions were adsorbed to a varied extent on the activated carbons. The presence of fluroxypyr in solution decreased their adsorption due to a competition effect. K(F) from the Freundlich equation linearly increased with water hardness due to salt-screened electrostatic repulsions between charged fluroxypyr molecules. The amount adsorbed from distilled water was largest at high fluroxypyr solution concentrations, because there was no competition between inorganic ions and fluroxypyr molecules. The column breakthrough volume and the amount adsorbed at breakthrough were smaller in tap versus distilled water. Carbon consumption was lower with activated carbon cloth than with the use of granular activated carbon.

  14. Relationships between testate amoeba communities and water quality in Lake Donghu,a large alkaline lake in Wuhan, China

    Institute of Scientific and Technical Information of China (English)

    Yangmin QIN; Bertrand FOURNIER; Enrique LARA; Yansheng GU; Hongmei WANG; Yongde CUI; Xiaoke ZHANG

    2013-01-01

    The middle Yangtze Reach is one of the most developed regions of China.As a result,most lakes in this area have suffered from eutrophication and serious environmental pollution during recent decades.The aquatic biodiversity in the lakes of the area is thus currently under significant threat from continuous human activities.Testate amoebae (TA) are benthic (rarely planktonic) microorganisms characterized by an agglutinated or autogenous shell.Owing to their high abundance,preservation potential in lacustrine sediments,and distinct response to environmental stress,they are increasingly used as indicators for monitoring water quality and reconstructing palaeoenvironmental changes.However this approach has not yet been developed in China.This study presents an initial assessment of benthic TA assemblages in eight lakes of Lake Donghu in the region of Wuhan,China.Testate amoeba community structure was most strongly correlated to water pH.In more alkaline conditions,communities were dominated by Centropyxis aculeata,Difflugia oblonga,Pontigulasia compressa,Pon.elisa and Lesquereusia modesta.These results are consistent with previous studies and show that TA could be useful for reconstructing past water pH fluctuations in China.To achieve this,the next step will be to expand the database and build transfer function models.

  15. Relationships between testate amoeba communities and water quality in Lake Donghu, a large alkaline lake in Wuhan, China

    Science.gov (United States)

    Qin, Yangmin; Fournier, Bertrand; Lara, Enrique; Gu, Yansheng; Wang, Hongmei; Cui, Yongde; Zhang, Xiaoke; Mitchell, Edward A. D.

    2013-06-01

    The middle Yangtze Reach is one of the most developed regions of China. As a result, most lakes in this area have suffered from eutrophication and serious environmental pollution during recent decades. The aquatic biodiversity in the lakes of the area is thus currently under significant threat from continuous human activities. Testate amoebae (TA) are benthic (rarely planktonic) microorganisms characterized by an agglutinated or autogenous shell. Owing to their high abundance, preservation potential in lacustrine sediments, and distinct response to environmental stress, they are increasingly used as indicators for monitoring water quality and reconstructing palaeoenvironmental changes. However this approach has not yet been developed in China. This study presents an initial assessment of benthic TA assemblages in eight lakes of Lake Donghu in the region of Wuhan, China. Testate amoeba community structure was most strongly correlated to water pH. In more alkaline conditions, communities were dominated by Centropyxis aculeata, Difflugia oblonga, Pontigulasia compressa, Pon. elisa and Lesquereusia modesta. These results are consistent with previous studies and show that TA could be useful for reconstructing past water pH fluctuations in China. To achieve this, the next step will be to expand the database and build transfer function models.

  16. Use of natural mordenite to remove chromium (III) and to neutralize pH of alkaline waste waters.

    Science.gov (United States)

    Córdova-Rodríguez, Valduvina; Rodríguez-Iznaga, Inocente; Acosta-Chávez, Raquel María; Chávez-Rivas, Fernando; Petranovskii, Vitalii; Pestryakov, Alexey

    2016-01-01

    The natural mordenite from Palmarito de Cauto deposit (PZ), Cuba, was studied in this work as an ion exchanger to remove Cr(3+) cations from alkaline aqueous solutions at different pH and chromium concentrations. The mordenite stability under cyclic treatment processes with alkaline solutions and its capacity to decrease the pH of the solutions was also analyzed. It was shown that PZ removes Cr(3+) ions from alkaline solutions, and it happens independently of the starting chromium concentration and the pH of the exchange solution used. This material has an important neutralizing effect on alkaline solutions, expressed in a significant pH decrease from the early stages of the treatments. For solutions with initial pH equal to 11, it decreases to a value of around seven. The stability of this material is not affected significantly after continuous cyclic treatment with NaOH solution, which shows that mordenite, in particular from Palmarito de Cauto deposit, has high stability in alkaline solutions. The results are important as they suggest that natural zeolites may be of interest in treatments of alkaline industrial waste effluents.

  17. Physico-Chemical, Biological and Therapeutic Characteristics of Electrolyzed Reduced Alkaline Water (ERAW

    Directory of Open Access Journals (Sweden)

    Marc Henry

    2013-12-01

    Full Text Available The consumption of alkaline reduced water produced by domestic electrolysis devices was approved in Japan in 1965 by the Ministry of Health, Labour and Welfare for the cure of gastro-intestinal disorders. Today, these devices are freely available in several countries and can be easily purchased without reserve. The commercial information included with the device recommends the consumption of 1–1.5 L of water per day, not only for gastro-intestinal disorders but also for numerous other illnesses such as diabetes, cancer, inflammation, etc. Academic research in Japan on this subject has been undergoing since 1990 only but has established that the active ingredient is dissolved dihydrogen that eliminates the free radical HO• in vivo. In addition, it was demonstrated that degradation of the electrodes during functioning of the device releases very reactive nanoparticles of platinum, the toxicity of which has not yet been clearly proven. This report recommends alerting health authorities of the uncontrolled availability of these devices used as health products, but which generate drug substances and should therefore be sold according to regulatory requirements.

  18. Volatile fatty acids production from anaerobic treatment of cassava waste water: effect of temperature and alkalinity.

    Science.gov (United States)

    Hasan, Salah Din Mahmud; Giongo, Citieli; Fiorese, Mônica Lady; Gomes, Simone Damasceno; Ferrari, Tatiane Caroline; Savoldi, Tarcio Enrico

    2015-01-01

    The production of volatile fatty acids (VFAs), intermediates in the anaerobic degradation process of organic matter from waste water, was evaluated in this work. A batch reactor was used to investigate the effect of temperature, and alkalinity in the production of VFAs, from the fermentation of industrial cassava waste water. Peak production of total volatile fatty acids (TVFAs) was observed in the first two days of acidogenesis. A central composite design was performed, and the highest yield (3400 mg L(-1) of TVFA) was obtained with 30°C and 3 g L(-1) of sodium bicarbonate. The peak of VFA was in 45 h (pH 5.9) with a predominance of acetic (63%) and butyric acid (22%), followed by propionic acid (12%). Decreases in amounts of cyanide (12.9%) and chemical oxygen demand (21.6%) were observed, in addition to the production of biogas (0.53 cm(3) h(-1)). The process was validated experimentally and 3400 g L(-1) of TVFA were obtained with a low relative standard deviation.

  19. High Iridium concentration of alkaline rocks of Deccan and implications to K/T boundary

    Indian Academy of Sciences (India)

    P N Shukla; N Bhandari; Anirban Das; A D Shukla; J S Ray

    2001-06-01

    We report here an unusually high concentration of iridium in some alkali basalts and alkaline rocks of Deccan region having an age of about 65Ma, similar to the age of the Cretaceous-Tertiary boundary. The alkali basalts of Anjar, in the western periphery of Deccan province, have irid-ium concentration as high as 178pg/g whereas the alkaline rocks and basalts associated with the Amba Dongar carbonatite complex have concentrations ranging between 8 and 80 pg/g. Some of these values are more than an order of magnitude higher than the concentration in the tholeiiticbasalts of Deccan, indicating the significance of alkaline magmatism in the iridium inventory at the Cretaceous-Tertiary boundary. Despite higher concentration, their contribution to the global inventory of iridium in the Cretaceous-Tertiary boundary clays remains small. The concentration of iridium in uorites from Amba Dongar was found to be < 30 pg/g indicating that iridium is not incorporated during their formation in hydrothermal activity.

  20. Changes in the water quality and bacterial community composition of an alkaline and saline oxbow lake used for temporary reservoir of geothermal waters.

    Science.gov (United States)

    Borsodi, Andrea K; Szirányi, Barbara; Krett, Gergely; Márialigeti, Károly; Janurik, Endre; Pekár, Ferenc

    2016-09-01

    Geothermal waters exploited in the southeastern region of Hungary are alkali-hydrogen-carbonate type, and beside the high amount of dissolved salt, they contain a variety of aromatic, heteroaromatic, and polyaromatic hydrocarbons. The majority of these geothermal waters used for heating are directed into surface waters following a temporary storage in reservoir lakes. The aim of this study was to gain information about the temporal and spatial changes of the water quality as well as the bacterial community composition of an alkaline and saline oxbow lake operated as reservoir of used geothermal water. On the basis of the water physical and chemical measurements as well as the denaturing gradient gel electrophoresis (DGGE) patterns of the bacterial communities, temporal changes were more pronounced than spatial differences. During the storage periods, the inflow, reservoir water, and sediment samples were characterized with different bacterial community structures in both studied years. The 16S ribosomal RNA (rRNA) gene sequences of the bacterial strains and molecular clones confirmed the differences among the studied habitats. Thermophilic bacteria were most abundant in the geothermal inflow, whereas the water of the reservoir was dominated by cyanobacteria and various anoxygenic phototrophic prokaryotes. In addition, members of several facultative anaerobic denitrifying, obligate anaerobic sulfate-reducing and syntrophic bacterial species capable of decomposition of different organic compounds including phenols were revealed from the water and sediment of the reservoir. Most of these alkaliphilic and/or halophilic species may participate in the local nitrogen and sulfur cycles and contribute to the bloom of phototrophs manifesting in a characteristic pink-reddish discoloration of the water of the reservoir.

  1. Removal of K+, Na+, Ca2+, and Mg2+ from saline-alkaline water using the microalga Scenedesmus obliquus

    Science.gov (United States)

    Yao, Zongli; Ying, Chengqi; Lu, Jianxue; Lai, Qifang; Zhou, Kai; Wang, Hui; Chen, Ling

    2013-11-01

    The capability of Scenedesmus obliquus to remove cations (K+, Na+, Ca2+, Mg2+) from saline-alkaline water was investigated at different salinities (0, 5, 10, 15, 20, 25) and carbonate alkalinities (0, 5, 10, 15, 20, 25, 30, 35 mmol/L). K+, Na+, Ca2+, and Mg2+ in saline-alkaline water were efficiently removed by S. obliquus. The maximum removal of the cations (29.37 mg for K+, 185.85 mg for Na+, 23.07 mg for Ca2+, 66.14 mg for Mg2+) occurred at salinity 25. The maximum removal of K+ (2.28 mg), Na+ (6.62 mg), Ca2+ (1.01 mg), and Mg2+ (0.62 mg) occurred at carbonate alkalinities of 25 mmol/L for K+, 35 mmol/L for Na+, 20 mmol/L for Ca2+, and 25 mmol/L for Mg2+, respectively. Under a salinity stress, the concentration of Na+ in S. obliquus increased significantly, while that of K+ decreased significantly. The concentrations of Ca2+ and Mg2+ decreased as well. The ratios of K+/Na+, Ca2+/Na+, and Mg2+/Na+ were significantly lower in all salinity treatments than those of the control. Under alkaline stress, the concentrations of Na+ and K+ in S. obliquus decreased significantly and the ratios of K+/Na+, Ca2+/Na+, and Mg2+/Na+ were significantly higher in all treatments than in the control. Moreover, the concentrations of Ca2+ and Mg2+ in S. obliquus at alkalinities of 5-10 mmol/L were significantly higher than those of the other treatments. The removal of Na+ by S. obliquus mainly occurs through biosorption, and Mg2+ and Ca2+ were removed through both biosorption and bioaccumulation.

  2. Pilot study on bromate reduction in ozonation of water with low carbonate alkalinities by carbon dioxide

    Institute of Scientific and Technical Information of China (English)

    Ji Li; Li Zou; Lulu Guo; Jialin Ji

    2011-01-01

    A pilot study was carried out to explore the application of carbon dioxide for pH depression in a bubble column and its ability to inhibit bromate formation for water with a low alkalinity.Results showed that in the absence of ammonia,CO2 was capable of reducing bromate 38.0%-65.4% with one-unit pH depression.CO2 caused a slightly lower bromate reduction (4.2%) than did H2SO4 when the pH was depressed to 7.4,and a more a pronounced lower reduction (8.8%) when the pH was depressed to 6.9.In the presence of 0.20mg/L-N ammonia,bromate was largely inhibited with 73.9% reduction.When the pH was depressed to 7.4,CO2 and H2SO4 showed an 11.3% and 23.5% bromate reduction respectively,demonstrating that the joint use of CO2 and ammonia might be a plausible strategy of blocking all three bromate formation pathways.CO2 could be applied through the aeration diffuser together with ozone gas,resulting in a similar bromate reduction compared with the premixing method through Venturi mixer.

  3. Site-Dependent Environmental Impacts of Industrial Hydrogen Production by Alkaline Water Electrolysis

    Directory of Open Access Journals (Sweden)

    Jan Christian Koj

    2017-06-01

    Full Text Available Industrial hydrogen production via alkaline water electrolysis (AEL is a mature hydrogen production method. One argument in favor of AEL when supplied with renewable energy is its environmental superiority against conventional fossil-based hydrogen production. However, today electricity from the national grid is widely utilized for industrial applications of AEL. Also, the ban on asbestos membranes led to a change in performance patterns, making a detailed assessment necessary. This study presents a comparative Life Cycle Assessment (LCA using the GaBi software (version 6.115, thinkstep, Leinfelden-Echterdingen, Germany, revealing inventory data and environmental impacts for industrial hydrogen production by latest AELs (6 MW, Zirfon membranes in three different countries (Austria, Germany and Spain with corresponding grid mixes. The results confirm the dependence of most environmental effects from the operation phase and specifically the site-dependent electricity mix. Construction of system components and the replacement of cell stacks make a minor contribution. At present, considering the three countries, AEL can be operated in the most environmentally friendly fashion in Austria. Concerning the construction of AEL plants the materials nickel and polytetrafluoroethylene in particular, used for cell manufacturing, revealed significant contributions to the environmental burden.

  4. Abnormal composition of carbon isotopes in underground alkaline waters of Kuzbass

    Science.gov (United States)

    Shvartsev, S. L.; Lepokurova, O. E.; Ponomarchuk, V. A.; Domrocheva, E. V.; Sizikov, D. A.

    2016-08-01

    The first data on abnormally high δ13C values in hydrocarbonates (HCO 3 - ) dissolved in underground waters of coal deposits of Kuzbass (up to +30.9‰) are reported. It is shown that such an unusual isotope composition of waters results from the long, strictly directed interaction in the water-rock-gas-organic material system occurring under the conditions of hindered water exchange. Extensive fractionation of C isotopes is the result of the evolution of the water-rock-gas-coal system after penetration of infiltration waters into the coal deposits and their long interaction with all these components, rather than metamorphism of organic material upon its transformation into coal. With respect to such an approach, the isotope composition of dissolved C may indicate the duration of the evolution in the water-rock-gas-organic material system.

  5. High-rate capability of zinc anodes in alkaline primary cells

    Science.gov (United States)

    Huot, Jean-Yves; Malservisi, Martin

    This work is devoted to the electrochemical aspects of high-power testing of primary alkaline LR6 ("AA") cells and to the factors influencing cell performance, namely the corresponding zinc anode behaviour under such high-rate conditions. The influence of the high-rate testing regime, such as the discharge mode and the end-potential, on zinc utilisation in alkaline cells has been monitored and its behaviour has been isolated by means of a pseudo-reference electrode. As anticipated, anode formulation, including zinc alloy composition and size distribution, is found to affect the cell's discharge curve and the corresponding zinc electrode potential and utilisation. The effects of these parameters on the discharge curve are discussed in terms of three stages of discharge. Finally, the high-rate capability of commercial LR6 cells is analysed in terms of zinc anode formulation. It was concluded that zinc electrode polarisation is very small and is relatively independent of manufacturer, of zinc anode formulation and of zinc alloying. On the other hand, metallic zinc utilisation remains very low under high-rate conditions.

  6. Alkaline electrolysis cell at high temperature and pressure of 250 °C and 42 bar

    DEFF Research Database (Denmark)

    Allebrod, Frank; Chatzichristodoulou, Christodoulos; Mogensen, Mogens Bjerg

    2013-01-01

    A new type of alkaline electrolysis cells with nickel foam based gas diffusion electrodes and KOH (aq) immobilized in mesoporous SrTiO3 has been developed and tested at temperatures and pressures up to 250 °C and 42 bar, respectively. Current densities of 1.0 A cm−2 have been measured at a cell...... voltage of 1.5 V without the use of expensive noble metal catalysts. High electrical efficiency and current density combined with relatively small production costs may lead to both reduced investment and operating costs for hydrogen and oxygen production....

  7. Use of highly alkaline conditions to improve cost-effectiveness of algal biotechnology.

    Science.gov (United States)

    Canon-Rubio, Karen A; Sharp, Christine E; Bergerson, Joule; Strous, Marc; De la Hoz Siegler, Hector

    2016-02-01

    Phototrophic microorganisms have been proposed as an alternative to capture carbon dioxide (CO2) and to produce biofuels and other valuable products. Low CO2 absorption rates, low volumetric productivities, and inefficient downstream processing, however, currently make algal biotechnology highly energy intensive, expensive, and not economically competitive to produce biofuels. This mini-review summarizes advances made regarding the cultivation of phototrophic microorganisms at highly alkaline conditions, as well as other innovations oriented toward reducing the energy input into the cultivation and processing stages. An evaluation, in terms of energy requirements and energy return on energy invested, is performed for an integrated high-pH, high-alkalinity growth process that uses biofilms. Performance in terms of productivity and expected energy return on energy invested is presented for this process and is compared to previously reported life cycle assessments (LCAs) for systems at near-neutral pH. The cultivation of alkaliphilic phototrophic microorganisms in biofilms is shown to have a significant potential to reduce both energy requirements and capital costs.

  8. A preorganized metalloreceptor for alkaline earth ions showing calcium versus magnesium selectivity in water: biological activity of selected metal complexes.

    Science.gov (United States)

    Amatori, Stefano; Ambrosi, Gianluca; Fanelli, Mirco; Formica, Mauro; Fusi, Vieri; Giorgi, Luca; Macedi, Eleonora; Micheloni, Mauro; Paoli, Paola; Rossi, Patrizia

    2014-08-25

    The N,N'-bis[(3-hydroxy-4-pyron-2-yl)methyl]-N,N'-dimethylethylendiamine (Malten = L) forms the highly stable [CuH(-2)L] species in water, in which the converging maltol oxygen atoms form an electron-rich area able to host hard metal ions. When considering the alkaline earth series (AE), the [Cu(H(-2)L)] species binds all metal ions, with the exception of Mg(2+), exhibiting the relevant property to discriminate Ca(2+) versus Mg(2+) at physiological pH 7.4; the binding of the AE metal is visible to the naked eye. The stability constant values of the trinuclear [AE{Cu(H(-2)L)}2](2+) species formed reach the maximum for Ca(2+) (log K=7.7). Ca(2+) also forms a tetranuclear [Ca{Cu(H(-2)L)}]2(4+) species at a high Ca(2+) concentration. Tri- and tetranuclear calcium complexes show blue- and pink-colored crystals, respectively. [Cu(H(-2)L)] is the most active species in inducing DNA alterations. The DNA damages are compatible with its hydrolytic cleavages.

  9. High-Strength / High Alkaline Resistant Fe-Phosphate Glass Fibers as Concrete Reinforcement

    Energy Technology Data Exchange (ETDEWEB)

    Mariano Velez

    2008-03-31

    Calcium-iron-phosphate glasses were developed whose chemical durabilities in alkaline solutions (pH 13) were comparable or superior to those of commercial alkaline-resistant (AR) silica-based glasses. However, the tensile strength of Ca-Fe-phosphate fibers, after being exposed to alkaline environments, including wet Portland cement pastes, is lower than that of current AR silicate fibers. Another series of Ca-Fe-phosphate glasses were developed with excellent chemical durability in strong acidic solutions (H2SO4, HF), indicating potential applications where silica-based fibers degrade very quickly, including E-glass. The new Ca-Fe-phosphate glasses can be melted and processed 300 to 500°C lower than silica-based glasses. This offers the possibility of manufacturing glass fibers with lower energy costs by 40-60% and the potential to reduce manufacturing waste and lower gas emissions. It was found that Ca-Fe-phosphate melts can be continuously pulled into fibers depending on the slope of the viscosity-temperature curve and with viscosity ~100 poise, using multi-hole Pt/Rh bushings.

  10. A newly high alkaline lipase: an ideal choice for application in detergent formulations

    Directory of Open Access Journals (Sweden)

    Cherif Slim

    2011-11-01

    Full Text Available Abstract Background Bacterial lipases received much attention for their substrate specificity and their ability to function in extreme environments (pH, temperature.... Many staphylococci produced lipases which were released into the culture medium. Reports of thermostable lipases from Staphylococcus sp. and active in alkaline conditions are not previously described. Results A newly soil-isolated Staphylococcus sp. strain ESW secretes an induced lipase in the culture medium. The effects of temperature, pH and various components in a detergent on the activity and stability of Staphylococcus sp. lipase (SL1 were studied in a preliminary evaluation for use in detergent formulation solutions. The enzyme was highly active over a wide range of pH from 9.0 to 13.0, with an optimum at pH 12.0. The relative activity at pH 13.0 was about 60% of that obtained at pH 12.0. It exhibited maximal activity at 60°C. This novel lipase, showed extreme stability towards non-ionic and anionic surfactants after pre-incubation for 1 h at 40°C, and relative stability towards oxidizing agents. Additionally, the crude enzyme showed excellent stability and compatibility with various commercial solid and liquid detergents. Conclusions These properties added to the high activity in high alkaline pH make this novel lipase an ideal choice for application in detergent formulations.

  11. High Serum Alkaline Phosphatase, Hypercalcaemia, Race, and Mortality in South African Maintenance Haemodialysis Patients

    Science.gov (United States)

    Duarte, Raquel; Naicker, Saraladevi

    2017-01-01

    Objective. To determine the association between serum total alkaline phosphatase (TAP) and mortality in African maintenance haemodialysis patients (MHD). Patients and Methods. The study enrolled a total of 213 patients on MHD from two dialysis centers in Johannesburg between January 2009 and March 2016. Patients were categorized into a low TAP group (≤112 U/L) versus a high TAP group (>112 U/L) based on a median TAP of 112 U/L. Results. During the follow-up period of 7 years, there were 55 (25.8%) deaths. After adjusting for cofounders such as age, other markers of bone disorder, and comorbidity (diabetes mellitus), patients in the high TAP group had significantly higher risk of death compared to patients in the low TAP group (hazard ratio, 2.50; 95% CI 1.24–5.01, P = 0.01). Similarly, serum calcium >2.75 mmol/L was associated with increased risk of death compared to patients within levels of 2.10–2.37 mmol/L (HR 6.34, 95% CI 1.40–28.76; P = 0.02). The HR for death in white patients compared to black patients was 6.88; 95% CI 1.82–25.88; P = 0.004. Conclusion. High levels of serum alkaline phosphatase, hypercalcaemia, and white race are associated with increased risk of death in MHD patients. PMID:28168054

  12. 强碱电解水的制备研究%PreParation of Strong Alkaline Electrolyzed Water

    Institute of Scientific and Technical Information of China (English)

    王雪平; 张欲凌; 杨侠; 袁军

    2015-01-01

    本文探讨了强碱电解水的制备工艺,通过对电解池串联块数、电解液种类、电解液浓度和电解电压的实验,得出选用两块电解池串联,电解液为碳酸钾(K2 cO3)溶液,其质量浓度为0.5%,电解电压为21 V 时可快速制得 pH 值为11.55的电解碱水。实验中对电解碱水保质时间的测定,可以得出新制的电解碱水在封闭条件下可以短时间保存。%In this thesis,the preparation of strong alkaline electrolyzed water was discussed. The number of electrolytic cell's blocks in series,type of electrolyte,the electrolyte concentration and the electrolysis voltage were investigated. The results show that:when choosing two blocks of electrolytic cell in series,using potassium carbonate(K2 cO3 )solution as the electrolyte,the concentration of K2 cO3 solution was 0. 5% and the electrolysis voltage was 21 V,the pH value of 11. 55 of alkaline electrolysis water can be quickly obtained . By the determination of the shelf time of the electrolytic alkaline water,it shows that strong alkaline electrolyzed water can be stored in short time under closed conditions.

  13. Thermal performance of a commercial alkaline water electrolyzer: Experimental study and mathematical modeling

    Energy Technology Data Exchange (ETDEWEB)

    Dieguez, P.M.; Ursua, A.; Sanchis, P.; Sopena, C.; Gandia, L.M. [Escuela Tecnica Superior de Ingenieros Industriales y de Telecomunicacion, Universidad Publica de Navarra, Campus de Arrosadia, E-31006 Pamplona (Spain); Guelbenzu, E. [Acciona Biocombustibles S.A. Avenida Ciudad de la Innovacion no. 5, E-31621 Sarriguren, Navarra (Spain)

    2008-12-15

    In this paper a study of the thermal performance of a commercial alkaline water electrolyzer (HySTAT from Hydrogenics) designed for a rated hydrogen production of 1 N m{sup 3} H{sub 2}/h at an overall power consumption of 4.90 kW h/N m{sup 3} H{sub 2} is presented. The thermal behaviour of the electrolyzer has been analyzed under different operating conditions with an IR camera and several thermocouples placed on the external surface of the main electrolyzer components. It has been found that the power dissipated as heat can be reduced by 50-67% replacing the commercial electric power supply unit provided together with the electrolyzer by an electronic converter capable of supplying the electrolyzer with a truly constant DC current. A lumped capacitance method has been adopted to mathematically describe the thermal performance of the electrolyzer, resulting in a thermal capacitance of 174 kJ C{sup -1}. The effect of the AC/DC converter characteristics on the power dissipated as heat has been considered. Heat losses to the ambient were governed by natural convection and have been modeled through an overall heat transfer coefficient that has been found to be 4.3 W m{sup -2} C{sup -1}. The model has been implemented using ANSYS {sup registered} V10.0 software code, reasonably describing the performance of the electrolyzer. A significant portion of the energy dissipated as heat allows the electrolyzer operating at temperatures suitable to reduce the cell overvoltages. (author)

  14. Relations between vegetation and water level in alkaline fen ecosystems in Denmark

    DEFF Research Database (Denmark)

    Munch Johansen, Ole; Andersen, Dagmar Kappel; Ejrnæs, Rasmus

    2017-01-01

    is proved to be a significant limiting factor for species diversity in wetlands, which should be considered along with the fertility in order to access the habitat quality. The study provides new insight in the water level preferences for GWDTEs which is highly needed in the management and assessment......, management and conservation of fens are constrained by limited knowledge on the relations between vegetation and measurable hydrological conditions. This study investigates the relations between vegetation and water level dynamics in groundwater dependent wetlands in Denmark. A total of 35 wetland sites...... Indicator scores of moisture, pH and nutrients were calculated for each site. The water level correlates with the number of typical fen species of vascular plants, whereas bryophytes are closer connected to the stable water level conditions provided by groundwater seepage. The water level variability...

  15. Effects of water hardness and alkalinity on the toxicity of uranium to a tropical freshwater hydra (Hydra viridissima).

    Science.gov (United States)

    Riethmuller, N; Markich, S J; Van Dam, R A; Parry, D

    2001-01-01

    In tropical Australian freshwaters, uranium (U) is of potential ecotoxicological concern, largely as a consequence of mining activities. Although the toxicity of uranium to Australian freshwater biota is comprehensive, by world standards, few data are available on the effects of physicochemical variables, such as hardness, alkalinity, pH and organic matter, on uranium speciation and bioavailability. This study determined the individual effects of water hardness (6.6, 165 and 330 mg l(-1) as CaCO3) and alkalinity (4.0 and 102 mg l(-1) as CaCO3), at a constant pH (6.0), on the toxicity (96 h population growth) of uranium to Hydra viridissima (green hydra). A 50-fold increase in hardness (Ca and Mg concentration) resulted in a 92% (two-fold) decrease in the toxicity of uranium to H. viridissima [i.e. an increase in the EC50 value and 95% confidence interval from 114 (107-121) to 219 (192-246) µg l(-1)]. Conversely, at a constant hardness (165 mg l-1 as CaCO3), the toxicity of uranium to H. viridissima was not significantly (P > 0.05) affected by a 25-fold increase in alkalinity (carbonate concentration) [i.e. EC50 values of 177 (166-188) and 171 (150-192) µg l(-1) at 4.0 and 102 mg l(-1) as CaCO3, respectively]. A knowledge of the relationship between water chemistry variables, including hardness and alkalinity, and uranium toxicity is useful for predicting the potential ecological detriment in aquatic systems, and can be used to relax national water quality guidelines on a site-specific basis.

  16. Calcium carbonate nucleation in an alkaline lake surface water, Pyramid Lake, Nevada, USA

    Science.gov (United States)

    Reddy, Michael M.; Hoch, Anthony

    2012-01-01

    Calcium concentration and calcite supersaturation (Ω) needed for calcium carbonate nucleation and crystal growth in Pyramid Lake (PL) surface water were determined during August of 1997, 2000, and 2001. PL surface water has Ω values of 10-16. Notwithstanding high Ω, calcium carbonate growth did not occur on aragonite single crystals suspended PL surface water for several months. However, calcium solution addition to PL surface-water samples caused reproducible calcium carbonate mineral nucleation and crystal growth. Mean PL surface-water calcium concentration at nucleation was 2.33 mM (n = 10), a value about nine times higher than the ambient PL surface-water calcium concentration (0.26 mM); mean Ω at nucleation (109 with a standard deviation of 8) is about eight times the PL surface-water Ω. Calcium concentration and Ω regulated the calcium carbonate formation in PL nucleation experiments and surface water. Unfiltered samples nucleated at lower Ω than filtered samples. Calcium concentration and Ω at nucleation for experiments in the presence of added particles were within one standard deviation of the mean for all samples. Calcium carbonate formation rates followed a simple rate expression of the form, rate (mM/min) = A (Ω) + B. The best fit rate equation "Rate (Δ mM/Δ min) = -0.0026 Ω + 0.0175 (r = 0.904, n = 10)" was statistically significant at greater than the 0.01 confidence level and gives, after rearrangement, Ω at zero rate of 6.7. Nucleation in PL surface water and morphology of calcium carbonate particles formed in PL nucleation experiments and in PL surface-water samples suggest crystal growth inhibition by multiple substances present in PL surface water mediates PL calcium carbonate formation, but there is insufficient information to determine the chemical nature of all inhibitors.

  17. Rhesus glycoprotein and urea transporter genes in rainbow trout embryos are upregulated in response to alkaline water (pH 9.7) but not elevated water ammonia.

    Science.gov (United States)

    Sashaw, Jessica; Nawata, Michele; Thompson, Sarah; Wood, Chris M; Wright, Patricia A

    2010-03-01

    Recent studies have shown that genes for the putative ammonia transporter, Rhesus glycoproteins (Rh) and the facilitated urea transporter (UT) are expressed before hatching in rainbow trout (Oncorhychus mykiss Walbaum) embryos. We tested the hypothesis that Rh and UT gene expressions are regulated in response to environmental conditions that inhibit ammonia excretion during early life stages. Eyed-up embryos (22 days post-fertilization (dpf)) were exposed to control (pH 8.3), high ammonia (1.70 mmol l(-1) NH4HCO3) and high pH (pH 9.7) conditions for 48h. With exposure to high water ammonia, ammonia excretion rates were reversed, tissue ammonia concentration was elevated by 9-fold, but there were no significant changes in mRNA expression relative to control embryos. In contrast, exposure to high water pH had a smaller impact on ammonia excretion rates and tissue ammonia concentrations, whereas mRNA levels for the Rhesus glycoprotein Rhcg2 and urea transporter (UT) were elevated by 3.5- and 5.6-fold, respectively. As well, mRNAs of the genes for H+ATPase and Na+/H+ exchanger (NHE2), associated with NH3 excretion, were also upregulated by 7.2- and 13-fold, respectively, in embryos exposed to alkaline water relative to controls. These results indicate that the Rhcg2, UT and associated transport genes are regulated in rainbow trout embryos, but in contrast to adults, there is no effect of high external ammonia at this stage of development.

  18. High Temperature and Pressure Alkaline Electrochemical Reactor for Conversion of Power to Chemicals

    DEFF Research Database (Denmark)

    Chatzichristodoulou, Christodoulos

    2016-01-01

    Moving away from fossil fuels requires harvesting more and more intermittent renewable energy resources and establishing a sustainable system for the production of chemicals. This brings forward the need for efficient large scale energy storage technologies 1-3 and technologies for the conversion...... densities. This work will provide an overview of our efforts to develop components of such high temperature alkaline electrochemical reactors for different applications. Low-cost large-scale production methods have been successfully employed for the production of ceramic diaphragms and full cells...... of renewable electricity to chemicals. Electrochemical reactors can play a crucial role in this endeavor, since they can efficiently and reversibly transform electricity to high-value chemicals, and thus serve as energy storage and recovery devices for balancing the grid, while offering a means...

  19. Microwave-Initiated Facile Formation of Ni3Se4 Nanoassemblies for Enhanced and Stable Water Splitting in Neutral and Alkaline Media.

    Science.gov (United States)

    Anantharaj, Sengeni; Kennedy, Jeevarathinam; Kundu, Subrata

    2017-02-28

    Molecular hydrogen (H2) generation through water splitting with minimum energy loss has become practically possible due to the recent evolution of high-performance electrocatalysts. In this study, we fabricated, evaluated, and presented such a high-performance catalyst which is the Ni3Se4 nanoassemblies that can efficiently catalyze water splitting in neutral and alkaline media. A hierarchical nanoassembly of Ni3Se4 was fabricated by functionalizing the surface-cleaned Ni foam using NaHSe solution as the Se source with the assistance of microwave irradiation (300 W) for 3 min followed by 5 h of aging at room temperature (RT). The fabricated Ni3Se4 nanoassemblies were subjected to catalyze water electrolysis in neutral and alkaline media. For a defined current density of 50 mA cm(-2), the Ni3Se4 nanoassemblies required very low overpotentials for the oxygen evolution reaction (OER), viz., 232, 244, and 321 mV at pH 14.5, 14.0, and 13.0 respectively. The associated lower Tafel slope values (33, 30, and 40 mV dec(-1)) indicate the faster OER kinetics on Ni3Se4 surfaces in alkaline media. Similarly, in the hydrogen evolution reaction (HER), for a defined current density of 50 mA cm(-2), the Ni3Se4 nanoassemblies required low overpotentials of 211, 206, and 220 mV at pH 14.5, 14.0, and 13.0 respectively. The Tafel slopes for HER at pH 14.5, 14.0, and 13.0 are 165, 156, and 128 mV dec(-1), respectively. A comparative study on both OER and HER was carried out with the state-of-the-art RuO2 and Pt under identical experimental conditions, the results of which revealed that our Ni3Se4 is a far better high-performance catalyst for water splitting. Besides, the efficiency of Ni3Se4 nanoassemblies in catalyzing water splitting in neutral solution was carried out, and the results are better than many previous reports. With these amazing advantages in fabrication method and in catalyzing water splitting at various pH, the Ni3Se4 nanoassemblies can be an efficient, cheaper

  20. Trichoderma harzianum transformant has high extracellular alkaline proteinase expression during specific mycoparasitic interactions

    Directory of Open Access Journals (Sweden)

    Goldman Maria Helena S.

    1998-01-01

    Full Text Available The mycoparasite Trichoderma harzianum produces an alkaline proteinase that may be specifically involved in mycoparasitism. We have constructed transformant strains of this fungus that overexpress this alkaline proteinase. Some of the transformants were assessed for alkaline proteinase activity, and those with higher activity than the wild type were selected for further studies. One of these transformant strains produced an elevated and constitutive pbr1 mRNA level during mycoparasitic interactions with Rhizoctonia solani.

  1. Thermal poling of alkaline earth boroaluminosilicate glasses with intrinsically high dielectric breakdown strength

    Science.gov (United States)

    Smith, Nicholas J.; Lanagan, Michael T.; Pantano, Carlo G.

    2012-04-01

    Per the rectification model of thermal poling, it has been proposed that intrinsic breakdown strength plays a strong limiting role in the internal DC fields supported by the glass from the poling process. One might therefore hypothesize proportionately larger second-order nonlinearity (SON) in glasses with intrinsically high dielectric breakdown strength. We test these ideas by thermal poling of two different commercial alkali-free alkaline-earth boroaluminosilicate display glasses—one with barium only (AF45 from Schott), and the other with a mixture of alkaline-earth ions (OA-10 G from NEG). Not only are such compositions relevant from a commercial standpoint, they are also interesting in that they have been recently shown to exhibit remarkably high intrinsic dielectric breakdown strengths of 11-14 MV/cm. Quantitative Maker fringe and stack Maker-fringe measurements provide an accurate evaluation of the poling-induced SON susceptibilities, and indicate maximum χ(2) values of 0.44 and 0.26 pm/V in these glasses. These values are comparable to those reported for silica and other multicomponent glasses. Thus, the hypothesis that higher χ(2) would be observed in high intrinsic breakdown strength glasses was not validated. Based on our application of the rectification model, internal fields of the order 2-4 MV/cm were calculated, which are well below the measured intrinsic breakdown strengths at room temperature. The most plausible explanation for these observations is nonlinear electronic conduction effects taking place within the depletion region at the poling temperature, limiting internal fields to a fraction of the breakdown field.

  2. Highly efficient anode catalyst with a Ni@PdPt core–shell nanostructure for methanol electrooxidation in alkaline media

    Institute of Scientific and Technical Information of China (English)

    Pei-shu Yu; Chun-tao Liu; Bo Feng; Jia-feng Wan; Li Li; Chun-yu Du

    2015-01-01

    To enhance the electrocatalytic activity of anode catalysts used in alkaline-media direct methanol fuel cells (DMFCs), a Ni@PdPt electrocatalyst was successfully prepared using a three-phase-transfer method. The Ni@PdPt electrocatalyst was characterized by X-ray dif-fraction (XRD), X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), and high-resolution TEM (HRTEM) techniques. The experimental results indicate that the average particle size of the core–shell-structured Ni@PdPt electrocatalyst is approxi-mately 5.6 nm. The Ni@PdPt electrocatalyst exhibits a catalytic activity 3.36 times greater than that of PdPt alloys for methanol oxidation in alkaline media. The developed Ni@PdPt electrocatalyst offers a promising alternative as a highly electrocatalytically active anode catalyst for alkaline DMFCs.

  3. Acid-base balance and hydration status following consumption of mineral-based alkaline bottled water

    Directory of Open Access Journals (Sweden)

    Heil Daniel P

    2010-09-01

    Full Text Available Abstract Background The present study sought to determine whether the consumption of a mineral-rich alkalizing (AK bottled water could improve both acid-base balance and hydration status in young healthy adults under free-living conditions. The AK water contains a naturally high mineral content along with Alka-PlexLiquid™, a dissolved supplement that increases the mineral content and gives the water an alkalizing pH of 10.0. Methods Thirty-eight subjects were matched by gender and self-reported physical activity (SRPA, hrs/week and then split into Control (12 women, 7 men; Mean +/- SD: 23 +/- 2 yrs; 7.2 +/- 3.6 hrs/week SRPA and Experimental (13 women, 6 men; 22 +/- 2 yrs; 6.4 +/- 4.0 hrs/week SRPA groups. The Control group consumed non-mineralized placebo bottled water over a 4-week period while the Experimental group consumed the placebo water during the 1st and 4th weeks and the AK water during the middle 2-week treatment period. Fingertip blood and 24-hour urine samples were collected three times each week for subsequent measures of blood and urine osmolality and pH, as well as total urine volume. Dependent variables were analyzed using multivariate repeated measures ANOVA with post-hoc focused on evaluating changes over time within Control and Experimental groups (alpha = 0.05. Results There were no significant changes in any of the dependent variables for the Control group. The Experimental group, however, showed significant increases in both the blood and urine pH (6.23 to 7.07 and 7.52 to 7.69, respectively, a decreased blood and increased urine osmolality, and a decreased urine output (2.51 to 2.05 L/day, all during the second week of the treatment period (P Conclusions Consumption of AK water was associated with improved acid-base balance (i.e., an alkalization of the blood and urine and hydration status when consumed under free-living conditions. In contrast, subjects who consumed the placebo bottled water showed no changes over the

  4. Effect of Proteolysis with Alkaline Protease Following High Hydrostatic Pressure Treatment on IgE Binding of Buckwheat Protein.

    Science.gov (United States)

    Lee, Chaeyoon; Lee, Wonhui; Han, Youngshin; Oh, Sangsuk

    2017-03-01

    Buckwheat is a popular food material in many Asian countries and it contains major allergenic proteins. This study was performed to analyze the effects of hydrolysis with alkaline protease following high hydrostatic pressure (HHP) treatment on the IgE binding of buckwheat protein. Extracted buckwheat protein was treated with HHP at 600 MPa for 30 min and hydrolyzed with alkaline protease for 240 min. IgE binding was examined using an enzyme-linked immunosorbent assay (ELISA) with serum samples from 14 patients who were allergic to buckwheat. Depending on the serum samples, HHP treatment of buckwheat protein without enzymatic hydrolysis decreased the IgE binding by 8.9% to 73.2% or increased by 31% to 78%. The IgE binding of buckwheat protein hydrolyzed with alkaline protease decreased by 73.8% to 100%. The IgE binding of buckwheat protein hydrolyzed with alkaline protease following HHP treatment decreased by 83.8% to 100%. This suggested that hydrolysis with alkaline protease following HHP treatment could be applied to reduce the IgE binding of buckwheat protein. © 2017 Institute of Food Technologists®.

  5. The alkaline comet assay used in evaluation of genotoxic damage of drinking water disinfection by-products (bromoform and chloroform

    Directory of Open Access Journals (Sweden)

    Messaouda Khallef

    2015-06-01

    Full Text Available The alkaline comet assay (pH 12.3 is a useful method for monitoring genotoxic effects of environmental pollutants in the root nuclei of Allium cepa and various plants; it allows the detection of single- and double-strand breaks, incomplete excision-repair sites and cross-links. It has been introduced to detect even small changes in DNA structure. It is a technically simple, highly sensitive, fast and economic test which detects in vitro and in vivo genotoxicity (DNA integrity and packing mode in any cell types examined, and requires just a few cells for its execution (Liman et al., 2011; Yıldız et al., 2009. Chloroform and bromoform are the most important trihalomethanes found in drinking water. Different concentrations of bromoform (25, 50, 75and 100µg/ml and chloroform (25, 50, 100 and 200 µg/ml were introduced to onion tuber roots. Distilled water was used as a negative control and methyl methansulfonate (MMS-10 µg/ml as positive control. All obtained data were subjected to statistical analyses by using SPSS 15.0 for Windows software. For comparison purposes, Duncan multiple range tests using one-way analysis of variance (ANOVA were employed and p<0.05 was accepted as the test of significance. Comet assay results showed that DNA damage was significant at p <0.05 for the different concentrations of chloroform and bromoform compared to the negative control which has a damage rate equal to 3.5 ± 0.7 and the positive control which has damage rate equal to 13.5 ± 2.12. The exposure of root tip cells to these disinfection by-products increases DNA damage. All concentrations examined in this study of bromoform and chloroform cause significant harm, which could be due to DNA damage induced by oxidative stress. The measurement of DNA damage in the nuclei of higher plant tissues is a new area of study with SCGE. This assay could be incorporated into in situ monitoring of atmosphere, water and soil: the comet assay allows a fast detection without

  6. Alkaline earth silicate wools - A new generation of high temperature insulation.

    Science.gov (United States)

    Brown, Robert C; Harrison, Paul T C

    2012-11-01

    Intensive study of the natural asbestiform minerals that cause human diseases, and the consequent understanding of their hazardous characteristics, has enabled the development of manufactured fibres whose physical and/or chemical properties, in particular as they relate to biopersistence, have been adjusted to minimize possible harm to health. A strong driver for the developmentof new high temperature insulation materials wasthe perception of the toxicity of refractory ceramic fibres (RCF)and their classification in the EU as a category 2 carcinogen under Directive 67/548/EEC. Such classification carries with it the requirement for substitution by less hazardous materials. This paper focuses on the development of alkaline earth silicate (AES) wools as a new class of high temperature insulation with the capability of such substitution in a number of applications. These wools have only a low potential to cause harm because they do not persist in lung tissue once deposited, and have produced minimal effects in experimental test systems. AES wools are increasingly being used in a wide range of high temperature applications.

  7. Biohydrogen Fermentation from Sucrose and Piggery Waste with High Levels of Bicarbonate Alkalinity

    Directory of Open Access Journals (Sweden)

    Jeongdong Choi

    2015-03-01

    Full Text Available This study examined the influence of biohydrogen fermentation under the high bicarbonate alkalinity (BA and pH to optimize these critical parameters. When sucrose was used as a substrate, hydrogen was produced over a wide range of pH values (5–9 under no BA supplementation; however, BA affected hydrogen yield significantly under different initial pHs (5–10. The actual effect of high BA using raw piggery waste (pH 8.7 and BA 8.9 g CaCO3/L showed no biogas production or propionate/acetate accumulation. The maximum hydrogen production rate (0.32 L H2/g volatile suspended solids (VSS-d was observed at pH 8.95 and 3.18 g CaCO3/L. BA greater than 4 g CaCO3/L also triggered lactate-type fermentation, leading to propionate accumulation, butyrate reduction and homoacetogenesis, potentially halting the hydrogen production rate. These results highlight that the substrate with high BA need to amend adequately to maximize hydrogen production.

  8. Influence of alkalinity, hardness and dissolved solids on drinking water taste: A case study of consumer satisfaction.

    Science.gov (United States)

    Lou, Jie-Chung; Lee, Wei-Li; Han, Jia-Yun

    2007-01-01

    Two surveys of consumer satisfaction with drinking water conducted by Taiwan Water Supply Corp. are presented in this study. The study results show that although a lot of money was invested to modify traditional treatment processes, over 60% of local residents still avoided drinking tap water. Over half of the respondents felt that sample TT (from the traditional treatment process) was not a good drinking water, whether in the first or second survey, whereas almost 60% of respondents felt that samples PA, PB, CCL and CT (from advanced treatment processes) were good to drink. For all drinking water samples, respondent satisfaction with a sample primarily depended on it having no unpleasant flavors. Taiwan Environmental Protection Administration plans to revise the drinking water quality standards for TH and TDS in the near future. The new standards require a lower TH concentration (from currently 400mg/L (as CaCO(3)) to 150mg/L (as CaCO(3))), and a lower TDS maximum admissible concentration from the current guideline of 600 to 250mg/L. Therefore, this study also evaluated the impacts on drinking water tastes caused by variations in TH and TDS concentrations, and assessed the need to issue more strict drinking water quality standards for TH and TDS. The research results showed that most respondents could not tell the difference in water taste among water samples with different TDS, TH and alkalinity. Furthermore, hardness was found to be inversely associated with cardiovascular diseases and cancers, and complying with more strict standards would lead most water facilities to invest billions of dollars to upgrade their treatment processes. Consequently, in terms of drinking water tastes alone, this study suggested that Taiwan Environmental Protection Administration should conduct more thorough reviews of the scientific literature that provides the rationale for setting standards and reconsider if it is necessary to revise drinking water quality standards for TH and

  9. Alkaline hydrogen peroxide treatment for TiO{sub 2} nanoparticles with superior water-dispersibility and visible-light photocatalytic activity

    Energy Technology Data Exchange (ETDEWEB)

    Wu, Chung-Yi; Tu, Kuan-Ju; Lo, Yu-Shiu [Department of Biomedical Engineering and Environmental Sciences, College of Nuclear Science, National Tsing Hua University, Hsinchu 30013, Taiwan (China); Pang, Yean Ling [Department of Chemical Engineering, Lee Kong Chian Faculty of Engineering and Science, Universiti Tunku Abdul Rahman, 43000 Kajang, Selangor (Malaysia); Wu, Chien-Hou, E-mail: chwu@mx.nthu.edu.tw [Department of Biomedical Engineering and Environmental Sciences, College of Nuclear Science, National Tsing Hua University, Hsinchu 30013, Taiwan (China)

    2016-09-15

    Alkaline hydrogen peroxide treatment was proposed as a simple and green way to improve the performance of commercial TiO{sub 2} powder for water-dispersibility and visible-light photocatalytic activity on the degradation of dye pollutants. The performance of treated TiO{sub 2} was evaluated as a function of NaOH concentration, H{sub 2}O{sub 2} concentration, and treatment time. The optimal conditions were determined to be 24 h in 100 mM H{sub 2}O{sub 2} and 8 M NaOH. The treated samples were characterized by Raman spectroscopy, high-resolution transmission electron microscopy (HR-TEM), X-ray photoelectron spectroscopy (XPS), dynamic light scattering (DLS), Fourier transform infrared spectroscopy (FTIR), and ultraviolet–visible spectrophotometry. The analysis revealed that the crystal structure, morphology, and absorption band gap were retained, but the surface of the treated TiO{sub 2} was dramatically changed. The treated TiO{sub 2} was highly dispersible with a uniform hydrodynamic size of 41 ± 12 nm and stable over months in water at pH 3 without any stabilizing ligand and could significantly enhance the visible-light photodegradation of dye pollutants. The superior performance might be attributed to the formation of abundant surface hydroxyl groups. This treatment paves the way for developing water-dispersible TiO{sub 2} with superior visible-light induced photocatalytic degradation of dye pollutants without any complicated and expensive surface modification. - Highlights: • Alkaline hydrogen peroxide is proposed to treat commercial TiO{sub 2} powder. • The treated TiO{sub 2} powder exhibits superior water-dispersibility with a uniform size distribution. • The treated TiO{sub 2} powder can significantly enhance the visible-light photodegradation of dyes.

  10. Characterization of high temperature-tolerant rhizobia isolated from Prosopis juliflora grown in alkaline soil.

    Science.gov (United States)

    Kulkarni, Suneeta; Nautiyal, Chandra Shekhar

    1999-10-01

    A method was developed for the fast screening and selection of high-temperature tolerant rhizobial strains from root nodules of Prosopis juliflora growing in alkaline soils. The high-temperature tolerant rhizobia were selected from 2,500 Rhizobium isolates with similar growth patterns on yeast mannitol agar plates after 72 h incubation at 30 and 45 degrees C, followed by a second screening at 47.5 degrees C. Seventeen high-temperature tolerant rhizobial strains having distinguishable protein band patterns were finally selected for further screening by subjecting them to temperature stress up to 60 degrees C in yeast mannitol broth for 6 h. The high-temperature tolerant strains were NBRI12, NBRI329, NBRI330, NBRI332, and NBRI133. Using this procedure, a large number of rhizobia from root nodules of P. juliflora were screened for high-temperature tolerance. The assimilation of several carbon sources, tolerance to high pH and salt stress, and ability to nodulate P. juliflora growing in a glasshouse and nursery of the strains were studied. All five isolates had higher plant dry weight in the range of 29.9 to 88.6% in comparison with uninoculated nursery-grown plants. It was demonstrated that it is possible to screen in nature for superior rhizobia exemplified by the isolation of temperature-tolerant strains, which established effective symbiosis with nursery-grown P. juliflora. These findings indicate a correlation between strain performance under in vitro stress in pure culture and strain behavior under symbiotic conditions. Pure culture evaluation may be a useful tool in search for Rhizobium strains better suited for soil environments where high temperature, pH, and salt stress constitutes a limitation for symbiotic biological nitrogen fixation.

  11. The Effects of High Alkaline Fly Ash on Strength Behaviour of a Cohesive Soil

    Directory of Open Access Journals (Sweden)

    A. Binal

    2016-01-01

    Full Text Available Contemporarily, there are 16 coal-burning thermal power plants currently operating in Turkey. This number is expected to rise to 46 in the future. Annually, about 15 million tons of fly ash are removed from the existing thermal power plants in Turkey, but a small proportion of it, 2%, is recyclable. Turkey’s plants are fired by lignite, producing Class C fly ash containing a high percentage of lime. Sulfate and alkali levels are also higher in Class C fly ashes. Therefore, fly ash is, commonly, unsuitable as an additive in cement or concrete in Turkey. In this study, highly alkaline fly ash obtained from the Yeniköy thermal power plants is combined with soil samples in different proportions (5%, 10%, 15%, 20%, and 25% and changes in the geomechanical properties of Ankara clay were investigated. The effect of curing time on the physicomechanical properties of the fly ash mixed soil samples was also analyzed. The soil classification of Ankara clay changed from CH to MH due to fly ash additives. Free swelling index values showed a decrease of 92.6%. Direct shear tests on the cohesion value of Ankara clay have shown increases by multiples of 15.85 and 3.01 in internal friction angle values. The California bearing ratio has seen a more drastic increase in value (68.7 times for 25% fly ash mix.

  12. Irrigation water acidification to neutralize alkalinity for nursery crop production: Substrate pH, electrical conductivity, and nutrient concentrations; and plant nutrition and growth

    Science.gov (United States)

    Liming agents (LA) in irrigation water, typically associated with carbonates and bicarbonates of calcium (Ca) and magnesium (Mg), contribute to water alkalinity. Repeated application of LA to container crops can cause media-solution pH to rise overtime, that uncorrected, can lead to a nutrient avail...

  13. Assessment of commercially available ion exchange materials for cesium removal from highly alkaline wastes

    Energy Technology Data Exchange (ETDEWEB)

    Brooks, K.P.; Kim, A.Y.; Kurath, D.E.

    1996-04-01

    Approximately 61 million gallons of nuclear waste generated in plutonium production, radionuclide removal campaigns, and research and development activities is stored on the Department of Energy`s Hanford Site, near Richland, Washington. Although the pretreatment process and disposal requirements are still being defined, most pretreatment scenarios include removal of cesium from the aqueous streams. In many cases, after cesium is removed, the dissolved salt cakes and supernates can be disposed of as LLW. Ion exchange has been a leading candidate for this separation. Ion exchange systems have the advantage of simplicity of equipment and operation and provide many theoretical stages in a small space. The organic ion exchange material Duolite{trademark} CS-100 has been selected as the baseline exchanger for conceptual design of the Initial Pretreatment Module (IPM). Use of CS-100 was chosen because it is considered a conservative, technologically feasible approach. During FY 96, final resin down-selection will occur for IPM Title 1 design. Alternate ion exchange materials for cesium exchange will be considered at that time. The purpose of this report is to conduct a search for commercially available ion exchange materials which could potentially replace CS-100. This report will provide where possible a comparison of these resin in their ability to remove low concentrations of cesium from highly alkaline solutions. Materials which show promise can be studied further, while less encouraging resins can be eliminated from consideration.

  14. Evaluation of gardenia yellow using crocetin from alkaline hydrolysis based on ultra high performance liquid chromatography and high-speed countercurrent chromatography.

    Science.gov (United States)

    Inoue, Koichi; Tanada, Chihiro; Nishikawa, Hiroaki; Matsuda, Satoru; Tada, Atsuko; Ito, Yusai; Min, Jun Zhe; Todoroki, Kenichiro; Sugimoto, Naoki; Toyo'oka, Toshimasa; Akiyama, Hiroshi

    2014-12-01

    Gardenia yellow is globally the most valuable spice and food color. It is generally a mixture of water-soluble carotenoid glycosyl esters which consist of crocetin bis(gentiobiosyl) ester as the main component. Crocetin is a natural carotenoid dicarboxylic acid that may be a candidate drug for pharmaceutical development, however, it is either present in trace amounts or is absent in natural gardenia yellow products. We here propose that crocetin produced by alkaline hydrolysis can be used to qualitatively evaluate gardenia yellow products using an ultra high performance liquid chromatographic assay. A useful and efficient isolation technique for isolating high-purity crocetin from gardenia yellow using high-speed countercurrent chromatography is described. High-speed countercurrent chromatographic fractionation followed by an ultra high performance liquid chromatographic assay showed that trans-crocetin is easily converted to about 15% cis-crocetin (85% trans-crocetin). Crocetin in gardenia yellow was quantitatively evaluated. Our approach is based on the hydrolysis process for converting crocetin glycosyl esters to crocetin before evaluation and isolation using the ultra high performance liquid chromatographic and high-speed countercurrent chromatographic methods. The combination of hydrolysis and chromatographic methods allows evaluation of the purity and quantity of crocetin in gardenia yellow.

  15. On the chemical state of Co oxide electrocatalysts during alkaline water splitting.

    Science.gov (United States)

    Friebel, Daniel; Bajdich, Michal; Yeo, Boon Siang; Louie, Mary W; Miller, Daniel J; Sanchez Casalongue, Hernan; Mbuga, Felix; Weng, Tsu-Chien; Nordlund, Dennis; Sokaras, Dimosthenis; Alonso-Mori, Roberto; Bell, Alexis T; Nilsson, Anders

    2013-10-28

    Resonant inelastic X-ray scattering and high-resolution X-ray absorption spectroscopy were used to identify the chemical state of a Co electrocatalyst in situ during the oxygen evolution reaction. After anodic electrodeposition onto Au(111) from a Co(2+)-containing electrolyte, the chemical environment of Co can be identified to be almost identical to CoOOH. With increasing potentials, a subtle increase of the Co oxidation state is observed, indicating a non-stoichiometric composition of the working OER catalyst containing a small fraction of Co(4+) sites. In order to confirm this interpretation, we used density functional theory with a Hubbard-U correction approach to compute X-ray absorption spectra of model compounds, which agree well with the experimental spectra. In situ monitoring of catalyst local structure and bonding is essential in the development of structure-activity relationships that can guide the discovery of efficient and earth abundant water splitting catalysts.

  16. Space-time variability of alkalinity in the Mediterranean Sea

    Directory of Open Access Journals (Sweden)

    G. Cossarini

    2014-09-01

    Full Text Available The paper provides a basin assessment of the spatial distribution of ocean alkalinity in the Mediterranean Sea. The assessment is made using a 3-D transport-biogeochemical-carbonate model to integrate the available experimental findings, which also constrains model output. The results indicate that the Mediterranean Sea shows alkalinity values that are much higher than those observed in the Atlantic Ocean on a basin-wide scale. A marked west-to-east surface gradient of alkalinity is reproduced as a response to the terrestrial discharges, the mixing effect with the Atlantic water entering from the Gibraltar Strait and the Black Sea water from Dardanelles, and the surface flux of evaporation minus precipitation. Dense water production in marginal seas (Adriatic and Aegean Seas, where alkaline inputs are relevant, and the Mediterranean thermohaline circulation sustains the west-to-east gradient along the entire water column. In the surface layers, alkalinity has a relevant seasonal cycle (up to 40 μmol kg−1 that is driven both by physical and biological processes. A comparison of alkalinity vs. salinity indicates that different regions present different relationships. In regions of freshwater influence, the two measures are negatively correlated due to riverine alkalinity input, whereas they are positively correlated in open seas. Alkalinity always is much higher than in the Atlantic waters, which might indicate a higher than usual buffering capacity towards ocean acidification, even at high concentrations of dissolved inorganic carbon.

  17. Immobilization of B, F, Cr, and As in alkaline coal fly ash through an aging process with water.

    Science.gov (United States)

    Ogawa, Yasumasa; Sakakibara, Kento; Wang, Li; Suto, Koichi; Inoue, Chihiro

    2014-10-01

    Fourteen different alkaline coal fly ashes (CFAs) were used for the experiment, in which each sample was mixed with water to be 28.6% of water content (wt/wt) and aged for 1-4 weeks at 10-30 °C. This simple treatment is advantageous for decreases in water-soluble B, F, Cr, and As. Compared to non-aged CFAs, their water-soluble fractions remained 0.56-88%, 21-85%, 0.37-93% and 2.6-88%, respectively, after aging for a week at 20 °C, although the amounts of Cr and As released from some CFA samples increased. Considering the significant decrease in elution of sulfate, Ca and Al after aging, the immobilization, namely prevention of toxic element elution, could be related to formation of secondary minerals such as portlandite, gypsum and ettringite. Immobilization of B and Cr tends to proceed preferentially under colder conditions. Aging at higher temperatures enhances the leachability of Cr in some CFA samples. Contrary to the behavior of B and Cr, water-soluble F effectively decreases under warmer conditions.

  18. Identification of novel chromone based sulfonamides as highly potent and selective inhibitors of alkaline phosphatases.

    Science.gov (United States)

    al-Rashida, Mariya; Raza, Rabia; Abbas, Ghulam; Shah, Muhammad Shakil; Kostakis, George E; Lecka, Joanna; Sévigny, Jean; Muddassar, Muhammad; Papatriantafyllopoulou, Constantina; Iqbal, Jamshed

    2013-08-01

    A new series of structurally diverse chromone containing sulfonamides has been developed. Crystal structures of three representative compounds (2a, 3a and 4a) in the series are reported. All compounds were screened for their inhibitory potential against alkaline phosphatases (ALPs). Two main classes of ALP isozymes were selected for this study, the tissue non-specific alkaline phosphatase (TNALP) from bovine and porcine source and the tissue-specific intestinal alkaline phosphatases (IALPs) from bovine source. All sulfonamide compounds had a marked preference for IALP (K(i), up to 0.01 ± 0.001 μM) over TNALPs. Kinetics studies of the compounds showed competitive mode of inhibition. Molecular docking studies were carried out in order to characterize the selective inhibition of the compounds. An additional interesting aspect of these chromone sulfonamides is their inhibitory activity against ecto-5'-nucleotidase enzyme. Copyright © 2013 Elsevier Masson SAS. All rights reserved.

  19. Characterization of Passive Film Formed on 304 SS in Simu-lated Alkaline Water Chemistries Containing Sulfur at 300℃

    Institute of Scientific and Technical Information of China (English)

    夏大海; 孙毅飞; 范洪强

    2015-01-01

    Passivity degradation of 304 stainless steel(SS) in simulated alkaline water chemistries at 300,℃was investigated using polarization curve, scanning electron microscope, time-of-flight secondary ion mass spectrome-try(SIMS) and X-ray photoelectron spectroscopy(XPS). Experimental results indicated that 304,SS was self-passive in the test solution and the thickness of passive film was about 500 nm. Hydroxide was enriched in the outer layer whereas oxide was enriched in the inner layer. Sulfur in thiosulfate could be reduced into lower valence of sulfur and enter the passive film so that the composition of passive film was modified by sulfur. Fe and Cr were enriched in the passive film whereas Ni was depleted in the passive film.

  20. Zero-Gap Alkaline Water Electrolysis Using Ion-Solvating Polymer Electrolyte Membranes at Reduced KOH Concentrations

    DEFF Research Database (Denmark)

    Kraglund, Mikkel Rykær; Aili, David; Jankova Atanasova, Katja;

    2016-01-01

    Membranes based on poly(2,2'-(m-phenylene)-5,5-bibenzimidazole) (m-PBI) can dissolve large amounts of aqueous KOH to give electrolyte systems with ion conductivity in a practically useful range. The conductivity of the membrane strongly depends on the concentration of the aqueous KOH phase......, reaching about 10-1 S cm-1 or higher in 15-25 wt% KOH. Herein, m-PBI membranes are systematically characterized with respect to performance and short-term stability as electrolyte in a zero-gap alkaline water electrolyzer at different KOH concentrations. Using plain uncatalyzed nickel foam electrodes...... exclusion chromatography and spectroscopy reveal evidence of oxidative degradation of the base polymer at KOH concentrations of 15 wt% and higher....

  1. Effects of Irrigation with Well Water on Chemical Characteristics of a Weakly Alkaline Soil Used as Rice Field

    Institute of Scientific and Technical Information of China (English)

    2002-01-01

    This paper discussed the effects of irrigation with well water on the salinity and pH of a weakly alkaline paddy soil in Fujin of Heilongjiang Province in the north-eastern part of China. It has been found that after seven years the accumulation of total soluble salts did not occur and that the pH of 0~15 cm layer fell down from 7.92~8. 30 to 6. 76~7. 45,and that the content of anion HCO-3 and its proportion in the total soluble anions have fallen down. Conversion from paddy soil to upland restored the pH of soil ,exchangeable sodium,ESR(exchangeable sodium ratio) to their original levels of upland fields respectively.

  2. Thermodynamics of a Ca(2+)-dependent highly thermostable alkaline protease from a haloalkliphilic actinomycete.

    Science.gov (United States)

    Gohel, S D; Singh, S P

    2015-01-01

    An alkaline protease from salt-tolerant alkaliphilic actinomycetes, Nocardiopsis alba OK-5 was purified by a single-step hydrophobic interaction chromatography and characterized. The purified protease with an estimated molecular mass of 20 kDa was optimally active at 70 °C in 0-3 M NaCl and 0-100 mM Ca(2+) displaying significant stability at 50-80 °C. The enzyme was stable at 80 °C in 100 mM Ca(2+) with Kd of 17 × 10(-3) and t1/2 of 32 min. The activation energy (Ea), enthalpy (ΔH*), and entropy (ΔS*) for the protease deactivation calculated in the presence of 200 mM Ca(2+) were 38.15 kJ/mol, 35.49 kJ/mol and 183.48 J/mol, respectively. The change in free energy (ΔG*) for protease deactivation at 60 °C in 200 mM Ca(2+) was 95.88 kJ/mol. Decrease in ΔH* reflected reduced cooperativity of deactivation and unfolding. The enzyme was intrinsically stable that counteracted heat denaturation by a weak cooperativity during the unfolding. Further, the enzyme was highly stable in the presence of various cations, surfactants, H2O2, β-mercaptoethanol, and commercial detergents. The compatibility of the enzyme with various cations, surfactants, and detergent matrices suggests its suitability as an additive in the detergents and peptide synthesis.

  3. Electrodeposition of Sn-Ni Alloy Coatings for Water-Splitting Application from Alkaline Medium

    Science.gov (United States)

    Shetty, Sandhya; Hegde, A. Chitharanjan

    2016-09-01

    In this work, Sn-Ni alloy coatings were developed onto the surface of copper from a newly formulated electrolytic bath by a simple and cost-effective electrodeposition technique using gelatin as an additive. The electrocatalytic behavior of coatings deposited at different current densities (c.d.'s) for water-splitting applications, in terms of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), has been researched. The experimental results showed that the electrocatalytic activity of Sn-Ni coatings has a close relationship with its composition, surface morphology, and phase structure depending on the c.d. used, supported by scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD) analyses. Cyclic voltammetry and chronopotentiometry techniques have demonstrated that Sn-Ni alloy deposited at 4.0 A dm-2 (having 37.6 wt pct Ni) and 1.0 A dm-2 (having 19.6 wt pct Ni) exhibit, respectively, the highest electrocatalytic behavior for HER and OER in 1.0-M KOH solution. Sn-Ni alloy coatings were found to be stable under working conditions of electrolysis, confirmed by electrochemical corrosion tests. High electrocatalytic activity of Sn-Ni alloy coatings for both HER and OER is specific to their composition, surface morphology, and active surface area.

  4. Electrodeposition of Sn-Ni Alloy Coatings for Water-Splitting Application from Alkaline Medium

    Science.gov (United States)

    Shetty, Sandhya; Hegde, A. Chitharanjan

    2017-02-01

    In this work, Sn-Ni alloy coatings were developed onto the surface of copper from a newly formulated electrolytic bath by a simple and cost-effective electrodeposition technique using gelatin as an additive. The electrocatalytic behavior of coatings deposited at different current densities (c.d.'s) for water-splitting applications, in terms of hydrogen evolution reaction (HER) and oxygen evolution reaction (OER), has been researched. The experimental results showed that the electrocatalytic activity of Sn-Ni coatings has a close relationship with its composition, surface morphology, and phase structure depending on the c.d. used, supported by scanning electron microscopy (SEM-EDX) and X-ray diffraction (XRD) analyses. Cyclic voltammetry and chronopotentiometry techniques have demonstrated that Sn-Ni alloy deposited at 4.0 A dm-2 (having 37.6 wt pct Ni) and 1.0 A dm-2 (having 19.6 wt pct Ni) exhibit, respectively, the highest electrocatalytic behavior for HER and OER in 1.0-M KOH solution. Sn-Ni alloy coatings were found to be stable under working conditions of electrolysis, confirmed by electrochemical corrosion tests. High electrocatalytic activity of Sn-Ni alloy coatings for both HER and OER is specific to their composition, surface morphology, and active surface area.

  5. Low dietary copper increases fecal free radical production, fecal water alkaline phosphatase activity and cytotoxicity in healthy men.

    Science.gov (United States)

    Davis, Cindy D

    2003-02-01

    One possible dietary factor that may increase susceptibility to colon cancer is inadequate copper intake. The objective of this study was to investigate the effects of low and adequate copper intakes on copper nutriture and putative risk factors for colon cancer susceptibility in healthy men. Seventeen healthy free-living nonsmoking men aged 21-52 y completed a 13-wk controlled feeding study in a randomized crossover design. The basal diet contained 0.59 mg Cu/13.65 MJ. After a 1-wk equilibration period in which the men consumed the basal diet supplemented with 1.0 mg Cu/d, they were randomly assigned to receive either the basal diet or the basal diet supplemented with 2 mg Cu/d for 6 wk. After the first dietary period, the men immediately began to consume the other level of Cu for the last 6 wk. They collected their feces during the equilibration period and during the last 2 wk of the two dietary periods for free radical and fecal water analysis. Low dietary copper significantly (P copper significantly (P copper concentrations but did not affect fecal water volume, pH, iron or zinc concentrations. In contrast to the fecal analysis, hematological indicators of copper status were not significantly affected by the dietary treatments. These results suggest that low dietary copper adversely affects fecal free radical production and fecal water alkaline phosphatase activity, which are putative risk factors for colon cancer.

  6. Unimolecular and hydrolysis channels for the detachment of water from microsolvated alkaline earth dication (Mg2+, Ca2+, Sr2+, Ba2+) clusters

    Energy Technology Data Exchange (ETDEWEB)

    Miliordos, Evangelos; Xantheas, Sotiris S.

    2014-02-07

    We examine theoretically the three channels that are associated with the detachment of a single water molecule from the aqueous clusters of the alkaline earth dications, [M(H2O)n]2+, M = Mg, Ca, Sr, Ba, n ≤ 6. These are the unimolecular water loss (M2+(H2O)n-1 + H2O) and the two hydrolysis channels resulting to the loss of hydronium ([MOH(H2O)n-2]+ + H3O+) and Zundel ([MOH(H2O)n-3]+ + H3O+(H2O)) cations. The Potential Energy Curves (PECs) corresponding to those three channels were constructed at the Møller-Plesset second order perturbation (MP2) level of theory with basis sets of double- and triple-ζ quality. We furthermore investigated the water and hydronium loss channels from the mono-hydroxide water clusters with up to four water molecules, [MOH(H2O)n]+, 1 ≤ n ≤ 4. Our results indicate the preference of the hydronium loss and possibly the Zundel cation loss channels for the smallest size clusters, whereas the unimolecular water loss channel is preferred for the larger ones as well as the mono-hydroxide clusters. Although the charge separation (hydronium and Zundel cation loss) channels produce more stable products when compared to the ones for the unimolecular water loss, they also require the surmounting of high energy barriers, a fact that makes the experimental observation of fragments related to these hydrolysis channels difficult.

  7. Geochemical study of water-rock interaction processes on geothermal systems of alkaline water in granitic massif; Estudio geoquimico de los procesos de interaccion agua-roca sobre sistemas goetermales de aguas alcalinas en granitoides

    Energy Technology Data Exchange (ETDEWEB)

    Buil gutierrez, B.; Garcia Sanz, S.; Lago San Jose, M.; Arranz Uague, E.; Auque Sanz, L. [Universidad de Zaragoza (Spain)

    2002-07-01

    The study of geothermal systems developed within granitic massifs (with alkaline waters and reducing ORP values) is a topic of increasing scientific interest. These systems are a perfect natural laboratory for studying the water-rock interaction processes as they are defined by three main features: 1) long residence time of water within the system, 2) temperature in the reservoir high enough to favour reaction kinetics and finally, 3) the comparison of the chemistry of the incoming and outgoing waters of the system allows for the evaluation of the processes that have modified the water chemistry and its signature, The four geothermal systems considered in this paper are developed within granitic massifs of the Spanish Central Pyrenes; these systems were studied from a geochemical point of view, defining the major, trace and REE chemistry of both waters and host rocks and then characterizing the composition and geochemical evolution of the different waters. Bicarbonate-chloride-sodic and bicarbonate-sodic compositions are the most representative of the water chemistry in the deep geothermal system, as they are not affected by secondary processes (mixing, conductive cooling, etc). (Author)

  8. High-Mg# andesitic lavas of the Shisheisky Complex, Northern Kamchatka: implications for primitive calc-alkaline magmatism

    Science.gov (United States)

    Bryant, J. A.; Yogodzinski, G. M.; Churikova, T. G.

    2011-05-01

    Primitive arc magmatism and mantle wedge processes are investigated through a petrologic and geochemical study of high-Mg# (Mg/Mg + Fe > 0.65) basalts, basaltic andesites and andesites from the Kurile-Kamchatka subduction system. Primitive andesitic samples are from the Shisheisky Complex, a field of Quaternary-age, monogenetic cones located in the Aleutian-Kamchatka junction, north of Shiveluch Volcano, the northernmost active composite volcano in Kamchatka. The Shisheisky lavas have Mg# of 0.66-0.73 at intermediate SiO2 (54-58 wt%) with low CaO (3.0 wt%) and K2O (>1.0 wt%). Olivine phenocryst core compositions of Fo90 appear to be in equilibrium with whole-rock `melts', consistent with the sparsely phyric nature of the lavas. Compared to the Shisheisky andesites, primitive basalts from the region (Kuriles, Tolbachik, Kharchinsky) have higher CaO (>9.9 wt%) and CaO/Al2O3 (>0.60), and lower whole-rock Na2O (andesites. The absence of plagioclase phenocrysts from the primitive andesitic lavas contrasts the plagioclase-phyric basalts, indicating relatively high pre-eruptive water contents for the primitive andesitic magmas compared to basalts. Estimated temperature and water contents for primitive basaltic andesites and andesites are 984-1,143°C and 4-7 wt% H2O. For primitive basalts they are 1,149-1,227°C and 2 wt% H2O. Petrographic and mineral compositions suggest that the primitive andesitic lavas were liquids in equilibrium with mantle peridotite and were not produced by mixing between basalts and felsic crustal melts, contamination by xenocrystic olivine, or crystal fractionation of basalt. Key geochemical features of the Shisheisky primitive lavas (high Ni/MgO, Na2O, Ni/Yb and Mg# at intermediate SiO2) combined with the location of the volcanic field above the edge of the subducting Pacific Plate support a genetic model that involves melting of eclogite or pyroxenite at or near the surface of the subducting plate, followed by interaction of that melt with

  9. Fractionation of oil palm frond hemicelluloses by water or alkaline impregnation and steam explosion.

    Science.gov (United States)

    Sabiha-Hanim, Saleh; Mohd Noor, Mohd Azemi; Rosma, Ahmad

    2015-01-22

    Steam explosion of oil palm frond has been carried out under different temperatures between 180 and 210°C for 4 min (severity of 2.96-3.84) after impregnation of the frond chips with water or KOH solution. The effects of impregnation and steam explosion conditions of oil palm fronds on the water soluble fraction and insoluble fraction were investigated. The maximum yield of hemicelluloses in water soluble fractions recovered was 23.49% and 25.33% for water and KOH impregnation, treated with steam explosion at temperature of 210°C (severity of 3.84) with a fractionation efficiency of 77.30% and 83.32%, respectively. Under this condition, the water insoluble fractions contained celluloses at 60.83% and 64.80% for water and KOH impregnation, respectively. The steam explosion temperature of 210°C for 4 min (logR(o) 3.84) was found to be the best condition in the extraction of hemicelluloses from OPF for both types of impregnation.

  10. Early containment of high-alkaline solution simulating low-level radioactive waste stream in clay-bearing blended cement

    Energy Technology Data Exchange (ETDEWEB)

    Kruger, A.A. [Westinghouse Hanford Co., Richland, WA (United States); Olson, R.A.; Tennis, P.D. [Northwestern Univ., Evanston, IL (United States). Center for Advanced Cement-Based Materials] [and others

    1995-04-01

    Portland cement blended with fly ash and attapulgite clay was mixed with high-alkaline solution simulating low-level radioactive waste stream at a one-to-one weight ratio. Mixtures were adiabatically and isothermally cured at various temperatures and analyzed for phase composition, total alkalinity, pore solution chemistry, and transport properties as measured by impedance spectroscopy. Total alkalinity is characterized by two main drops. The early one corresponds to a rapid removal of phosphorous, aluminum, sodium, and to a lesser extent potassium solution. The second drop from about 10 h to 3 days is mainly associated with the removal of aluminum, silicon, and sodium. Thereafter, the total alkalinity continues descending, but at a lower rate. All pastes display a rapid flow loss that is attributed to an early precipitation of hydrated products. Hemicarbonate appears as early as one hour after mixing and is probably followed by apatite precipitation. However, the former is unstable and decomposes at a rate that is inversely related to the curing temperature. At high temperatures, zeolite appears at about 10 h after mixing. At 30 days, the stabilized crystalline composition Includes zeolite, apatite and other minor amounts of CaCO{sub 3}, quartz, and monosulfate Impedance spectra conform with the chemical and mineralogical data. The normalized conductivity of the pastes shows an early drop, which is followed by a main decrease from about 12 h to three days. At three days, the permeability of the cement-based waste as calculated by Katz-Thompson equation is over three orders of magnitude lower than that of ordinary portland cement paste. However, a further decrease in the calculated permeability is questionable. Chemical stabilization is favorable through incorporation of waste species into apatite and zeolite.

  11. Liquefaction of empty palm fruit bunch (EPFB) in alkaline hot compressed water

    Energy Technology Data Exchange (ETDEWEB)

    Akhtar, Javaid; Kuang, Soo Kim; Amin, NorAishah Saidina [Chemical Reaction Engineering Group (CREG), Faculty of Chemical and Natural Resources Engineering (FKKKSA), Universiti Teknologi Malaysia, 81310 UTM, Skudai, Johor (Malaysia)

    2010-06-15

    Effect of alkalis (NaOH, KOH and K{sub 2}CO{sub 3}) on liquefaction of EPFB (empty palm fruit bunch) biomass liquefaction was investigated under subcritical water conditions in a batch reactor operating at 270 C and 20 bars for a period of 20 min. Catalytic performance and suitable biomass to water ratio that supported higher EPFB conversion, liquid hydrocarbons yield and lignin degradations were screened. Analytical results indicate that maximum of 68 wt% liquids were produced along with 72.4 wt% EPFB mass conversions and 65.6 wt% lignin degradation under 1.0 M K{sub 2}CO{sub 3}/2:10 (biomass/water) conditions. In comparison, the experiments that were performed in the absence of alkalis yielded only 30.4 wt% liquids, converted 36 wt% EPFB and degraded 24.3 wt% lignin. Furthermore, biomass to water ratios >2:10 decreased both solid mass conversion and liquid hydrocarbons' yield. The reactivity of the alkalis was in the order of K{sub 2}CO{sub 3} > KOH > NaOH. The liquid compositions were dominantly phenols and esters; the highest value of phenol (60.1 wt% of liquid yield) was achieved in the case of K{sub 2}CO{sub 3} (1.0 M) with 5 g EPFB/25 ml water ratio while 1.0 M NaOH yielded maximum esters (86.4 wt% of liquid yield). The alkali promoted process assisted with hot water treatments seemed promising for production of bio-oils from EPFB. (author)

  12. The application of alkaline and acidic electrolyzed water in the sterilization of chicken breasts and beef liver.

    Science.gov (United States)

    Shimamura, Yuko; Shinke, Momoka; Hiraishi, Miki; Tsuchiya, Yusuke; Masuda, Shuichi

    2016-05-01

    The sterilization effect of a combination treatment with alkaline electrolyzed water (AlEW) and strong acidic electrolyzed water (StAEW) on fresh chicken breasts and beef liver was evaluated. Samples (1, 5, and 10 g) were inoculated with Salmonella Enteritidis NBRC3313, Escherichia coli ATCC 10798, Staphylococcus aureus FDA209P, and S. aureus C-29 [staphylococcal enterotoxin A (SEA) productive strain] and subjected to a dipping combination treatment (4°C and 25°C for 3 min) with AlEW and StAEW. Combination treatment with AlEW and StAEW significantly reduced the bacteria, and reduction of more than 1 log colony-forming units (CFU)/g was achieved. Furthermore, this combination treatment significantly decreased the SEA gene expression level in samples. Some quality variables of the meat samples such as pH, lipid oxidation, color, amino-acid content, texture, and sensory characteristics showed no significant differences between the combination treatment with AlEW and StAEW and the untreated control.

  13. Conversion of fructose, glucose, and cellulose to 5-hydroxymethylfurfural by alkaline earth phosphate catalysts in hot compressed water.

    Science.gov (United States)

    Daorattanachai, Pornlada; Khemthong, Pongtanawat; Viriya-Empikul, Nawin; Laosiripojana, Navadol; Faungnawakij, Kajornsak

    2012-12-01

    The phosphates of alkaline earth metals (calcium and strontium) synthesized by precipitation process in acetone-water media system were used as catalysts for converting fructose, glucose, and cellulose to 5-hydroxymethylfurfural (HMF) under hot compressed water condition. It was found that the phosphates of calcium and strontium effectively catalyzed the HMF formation from fructose and glucose dehydration and cellulose hydrolysis/dehydration reaction, as compared with the non-catalytic system. The XRD analysis confirmed the CaP(2)O(6) and α-Sr(PO(3))(2) crystalline phases of the catalyst samples, while acid strength of both catalysts was in a range of +3.3 ≤ H(0) ≤ +4.8. From the study, CaP(2)O(6) and α-Sr(PO(3))(2) showed similar catalytic performance toward the dehydration of sugars, providing the HMF yields of 20-21% and 34-39% from glucose and fructose, respectively; whereas the total yield of glucose and HMF from the hydrolysis/dehydration of cellulose over α-Sr(PO(3))(2) (34%) was higher than that over CaP(2)O(6) (17.4%).

  14. Bacterial diversity and composition of an alkaline uranium mine tailings-water interface.

    Science.gov (United States)

    Khan, Nurul H; Bondici, Viorica F; Medihala, Prabhakara G; Lawrence, John R; Wolfaardt, Gideon M; Warner, Jeff; Korber, Darren R

    2013-10-01

    The microbial diversity and biogeochemical potential associated with a northern Saskatchewan uranium mine water-tailings interface was examined using culture-dependent and -independent techniques. Morphologically-distinct colonies from uranium mine water-tailings and a reference lake (MC) obtained using selective and non-selective media were selected for 16S rRNA gene sequencing and identification, revealing that culturable organisms from the uranium tailings interface were dominated by Firmicutes and Betaproteobacteria; whereas, MC organisms mainly consisted of Bacteroidetes and Gammaproteobacteria. Ion Torrent (IT) 16S rRNA metagenomic analysis carried out on extracted DNA from tailings and MC interfaces demonstrated the dominance of Firmicutes in both of the systems. Overall, the tailings-water interface environment harbored a distinct bacterial community relative to the MC, reflective of the ambient conditions (i.e., total dissolved solids, pH, salinity, conductivity, heavy metals) dominating the uranium tailings system. Significant correlations among the physicochemical data and the major bacterial groups present in the tailings and MC were also observed. Presence of sulfate reducing bacteria demonstrated by culture-dependent analyses and the dominance of Desulfosporosinus spp. indicated by Ion Torrent analyses within the tailings-water interface suggests the existence of anaerobic microenvironments along with the potential for reductive metabolic processes.

  15. Comparison of mine water neutralisation efficiencies of different alkaline generating agents

    CSIR Research Space (South Africa)

    Masindi, Vhahangwele

    2017-08-01

    Full Text Available , Fe, Mn and sulphate. The low pH of mine water promotes the leaching of residual toxic and hazardous chemical species from the surrounding parent rocks. Due to the potency of AMD to harm the environment and degrade its intrinsic values, this mine...

  16. Production and Characterization of Alkaline Protease from a High Yielding and Moderately Halophilic Strain of SD11 Marine Bacteria

    Directory of Open Access Journals (Sweden)

    Hongxia Cui

    2015-01-01

    Full Text Available A marine bacterium SD11, which was isolated from sea muds (Geziwo Qinhuangdao Sea area, China, was used to produce thermostable alkaline serine nonmetal protease in the skim milk agar plate medium with 10% NaCl. The optimal temperature about the manufacture of the extracellular protease was ~60°C. The crude enzyme was stable at 20–50°C. The activity was retained to 60% and 45% after heating for 1 h at 60 and 70°C, respectively. The protease was highly active in a wide pH scope (8.0–10.0 and maximum protease activity exhibited at pH 10.0. The activity was restrained by phenylmethylsulfonyl fluoride (PMSF but mildly increased (~107% in the presence of ethylenediaminetetraacetic acid (EDTA, indicating that the production contains serine-protease(s and nonmetal protease(s. Moreover, the crude alkaline protease was active with the 5 mM Ca2+, Mn2+, Zn2+, Cu2+, Na+, and K+ that existed separately. In addition, the protease showed superduper stability when exposed to an anionic surfactant (5 mM SDS, an oxidizing agent (1% H2O2, and several organic solvents (methanol, isopropanol, and acetone. These results suggest that the marine bacterium SD11 is significant in the industry from the prospects of its ability to produce thermally stable alkaline protease.

  17. Validation of a high-throughput in vitro alkaline elution/rat hepatocyte assay for DNA damage.

    Science.gov (United States)

    Gealy, Robert; Wright-Bourque, Jennifer L; Kraynak, Andrew R; McKelvey, Troy W; Barnum, John E; Storer, Richard D

    2007-04-20

    In vitro alkaline elution is a sensitive and specific short term assay which measures DNA strand breakage in a mammalian test system (primary rat hepatocytes). This lab has previously demonstrated the performance of the assay with known genotoxic and non-genotoxic compounds. The methodology employed has relatively low sample throughput and is labor-intensive, requiring a great deal of manual processing of samples in a format that is not amenable to automation. Here, we present an automated version of the assay. This high-throughput alkaline elution assay (HT-AE) was made possible through 3 key developments: (1) DNA quantitation using PicoGreen and OliGreen fluorescent DNA binding dyes; (2) design and implementation of a custom automation system; and (3) reducing the assay to a 96-well plate format. The assay can now be run with 5-50mg of test compound. HT-AE was validated in a similar manner as the original assay, including assessment of non-genotoxic and non-carcinogenic compounds and evaluation of cytotoxicity to avoid confounding effects of toxicity-associated DNA degradation. The validation test results from compounds of known genotoxic potential were used to set appropriate criteria to classify alkaline elution results for genotoxicity.

  18. A facile synthesis of highly stable multiblock poly(arylene ether)s based alkaline membranes for fuel cells

    Science.gov (United States)

    Jasti, Amaranadh; Shahi, Vinod K.

    2014-12-01

    Herein, we are disclosing simple route for the preparation of alkaline membranes (AMs) based on aminated multiblock poly(arylene ether)s (AMPEs) synthesized by nucleophilic substitution-poly condensation followed by quaternization and alkalization reactions. In this procedure, four quaternary ammonium groups are successfully introduced without use of carcinogenic reagents such as chloromethylmethyl ether (CMME). Hydrophilic/hydrophobic phase separation is responsible for their high hydroxide conductivity (∼150 mS cm-1 at 80 °C) due to development of interconnected ion transport pathway. AMs are exhibiting good alkaline stability due to the presence of two vicinal quaternary ammonium groups and avoid degradation such as Sommelet-Hauser rearrangement and Hofmann elimination. Vicinal quaternary ammonium groups also resist nucleophilic (OH-) attack and suppress the Stevens rearrangement as well as SN2 substitution reaction due to stearic hindrance. Optimized AM (AMPE-M20N15 (55% DCM)) exhibits about 0.95 V open circuit voltage (OCV) and 48.8 mW cm-2 power density at 65 °C in alkaline direct methanol fuel cell (ADMFC) operation. These results suggest promising begin for the preparation of stable and conductive AMs for ADMFC applications and useful for developing hydroxide conductive materials.

  19. Facile Alkaline Lysis of Escherichia coli Cells in High-Throughput Mode for Screening Enzyme Mutants: Arylsulfatase as an Example.

    Science.gov (United States)

    Yuan, Mei; Yang, Xiaolan; Li, Yuwei; Liu, Hongbo; Pu, Jun; Zhan, Chang-Guo; Liao, Fei

    2016-06-01

    Facile alkaline lysis of Escherichia coli cells in high-throughput (HTP) mode for screening enzyme mutants was tested with Pseudomonas aeruginosa arylsulfatase (PAAS). The alkaline lysis buffer was 1.0 M Tris-HCl at pH 9.0 plus 0.1 % Tween-20 and 2.0 mM 4-aminobenzamidine, mixed with cell suspension at 8:1 to 12:1 ratio for continuous agitation of mixtures in 96-well plates under room temperature; enzymatic activity in lysates was measured with 96-well microplate. PAAS activity tolerated final 0.1 % Tween-20. Individual clones were amplified for 12 h in 0.50 mL TB medium with 48-well plates to enhance the repeatability of induced expression. During continuous agitation of the mixture of cells and the lysis buffer, PAAS activities in lysates were steady from 3 to 9 h and comparable to sonication treatment but better than freezing-thawing. Coefficients of variation of activities of PAAS/mutants in lysates after treatment for 7 h reached ∼22 %. The mutant M72Q had specific activity 2-fold of G138S. By HTP lysis of cells, M72Q was recognized as a positive mutant over G138S with the area under the curve of 0.873. Therefore, for enzymes tolerating concentrated alkaline buffers, the proposed alkaline lysis approach may be generally applicable for HTP lysis of host cells during directed evolution.

  20. Design of the On-line Detecting System for the Total Alkalinity in Boiler Water%锅炉水总碱度在线检测系统设计

    Institute of Scientific and Technical Information of China (English)

    邓宏康; 郁燕东; 吉训生; 贾云龙

    2013-01-01

    以流动注射分析系统为核心、LabVIEW为软件开发平台,设计了锅炉水总碱度在线检测系统.通过LabVIEW平台,实时采集流动注射分析系统中由pH电极测得的电压值并对采集到的信号进行分析和处理.根据流动注射分析峰的面积与锅炉水总碱度对数之间的线性关系,通过计算得到锅炉水的总碱度.运行测试结果表明,该系统测量精度高、可扩展性强、操作简单、人机界面友好,可在线、实时、有效、快速地测定锅炉水总碱度.%The on-line detecting system for total alkalinity in boiler water is designed with flow injection analysis (FIA) system as the core and LabVIEW as software developing platform.The voltage values that measured by the pH electrode in FIA system are acquired in real time through the LabVIEW platform,and the acquired signals are analyzed and processed.In accordance with the linear relationship between the peak area of FIA and the logarithm of the total alkalinity in boiler water,the total alkalinity in boiler water can be determined.The test result shows that the system features high precision,good extensibility,simply operation and user-friendly interface; it implements online,effective and rapid measurement in real time for the total alkalinity in boiler water.

  1. Chabazite: stable cation-exchanger in hyper alkaline concrete pore water.

    Science.gov (United States)

    Van Tendeloo, Leen; Wangermez, Wauter; Kurttepeli, Mert; de Blochouse, Benny; Bals, Sara; Van Tendeloo, Gustaaf; Martens, Johan A; Maes, André; Kirschhock, Christine E A; Breynaert, Eric

    2015-02-17

    To avoid impact on the environment, facilities for permanent disposal of hazardous waste adopt multibarrier design schemes. As the primary barrier very often consists of cement-based materials, two distinct aspects are essential for the selection of suitable complementary barriers: (1) selective sorption of the contaminants in the repository and (2) long-term chemical stability in hyperalkaline concrete-derived media. A multidisciplinary approach combining experimental strategies from environmental chemistry and materials science is therefore essential to provide a reliable assessment of potential candidate materials. Chabazite is typically synthesized in 1 M KOH solutions but also crystallizes in simulated young cement pore water, a pH 13 aqueous solution mainly containing K(+) and Na(+) cations. Its formation and stability in this medium was evaluated as a function of temperature (60 and 85 °C) over a timeframe of more than 2 years and was also asessed from a mechanistic point of view. Chabazite demonstrates excellent cation-exchange properties in simulated young cement pore water. Comparison of its Cs(+) cation exchange properties at pH 8 and pH 13 unexpectedly demonstrated an increase of the KD with increasing pH. The combined results identify chabazite as a valid candidate for inclusion in engineered barriers for concrete-based waste disposal.

  2. Predicting Gran alkalinity and calcium concentrations in river waters over a national scale using a novel modification to the G-BASH model.

    Science.gov (United States)

    Cresser, Malcolm S; Ahmed, Nayan; Smart, Richard P; Arowolo, Toyin; Calver, Louise J; Chapman, Pippa J

    2006-09-01

    Monthly stream water calcium and Gran alkalinity concentration data from 11 sub-catchments of the Nether Beck in the English Lake District have been used to appraise the transferability of the Scottish, River Dee-based G-BASH model. Readily available riparian zone geochemistry and flow paths were used initially to predict minimum and mean stream water concentrations at the Nether Beck, based on calibration equations from the River Dee catchment data. Predicted values significantly exceeded observed values. Differences in runoff between the two areas, leading to a dilution effect in the Nether Beck, explained most of the difference between observed and predicted values. Greater acid deposition in the Lake District also reduced stream water Gran alkalinity concentrations in that area. If regional differences in precipitation, evapotranspiration and pollutant deposition are incorporated into the model, it may then be used reliably to predict catchment susceptibility to acidification over a wide regional (national) scale.

  3. High power density alkaline fuel cell technology for MMW space burst power

    Science.gov (United States)

    Preston, J. Lawrence, Jr.; Trocciola, John C.; Wertheim, Ronald J.

    The use of advanced alkaline regenerative fuel cell energy storage systems to provide 10's to 100's of MWe of sprint (burst) power for 100's of seconds per orbit of SDI weapons platform was studied. Recharge power is supplied by a multimegawatt space based nuclear power system. Regenerative fuel cell energy storage systems offer the potential for significant platform mass reduction by reducing the size and mass of the nuclear power source required. This is because the reactor can be sized for the smaller average power level for the energy storage system, rather than the sprint power level. The regenerative fuel cell is a particularly attractive energy storage device because the fuel cell is essentially a static power conversion device, which results in excellent platform stability for weapon pointing and tracking. Based upon the detailed point design and conceptual layout, the alkaline regenerative fuel cell energy storage system is an attractive choice for integration with a nuclear thermionic system for providing multimegawatt burst power and multi orbit capability.

  4. Selection of alkalinity regulator for water supply treatment%给水处理碱性调节剂的选择

    Institute of Scientific and Technical Information of China (English)

    刘江华; 邵寿强

    2013-01-01

    为提高原水的pH值,强化混凝、沉淀效果,优化出水水质,在给水处理过程中需投加碱性调节剂.研究对比了食品级氢氧化钠和碳酸钠调节pH值的效果,以及对出水水质的影响.分析了2种碱性调节剂的投加成本,结果表明,采用食品级固体氢氧化钠作为碱性调节剂时效果良好,生产成本更低.%Abstraet:In order to increase the pH value of the raw water,strengthen the coagulation and sedimentation effect,improve the effluent water quality,alkalinity regulator should be added during the water supply treatment.The adjusting effects of food-grade NaOH and Na2CO3 to pH value,and the influences of them on effluent water quality were compared and studied.Furthermore,the costs of the said two alkalinity regulators were analyzed,and the results indicated that,using food-grade solid NaOH as the alkalinity for water supply treatment could obtain a good effect and the production cost was lower.

  5. Phase transformation of the brownmillerite SrCoO2.5 thin film through alkaline water electrolysis

    Science.gov (United States)

    Tambunan, Octolia Togibasa; Lee, Min Young; Kim, Deok Hyeon; Parwanta, Kadek Juliana; Jung, Chang Uk

    2014-06-01

    A phase transformation from insulating brownmillerite SrCoO2.5 to conducting perovskite SrCoO3 through electrochemical oxidation has been demonstrated for thin films of SrCoOx on a SrTiO3 (001) substrate. The cobalt-oxide film strongly favors the brownmillerite phase of SrCoO2.5 instead of the perovskite phase of SrCoO3 on a SrTiO3 (001) substrate due to its low lattice mismatch. Therefore, the phase transformation has its own retention. The alkaline water electrolysis occurs between the copper cathode and the SrCoO2.5 film anode. The H+ ions are attracted to the cathode and generate H2 gas. The OH- ions are attracted to the film's surface and generate a rich amount of oxygen to fill the oxygen vacancy channel of brownmillerite SrCoO2.5. The phase transformation was verified from the change in the out-of-plane lattice constant and the change in the resistivity of the electrolyzed film.

  6. Use Alkalinity Monitoring to Optimize Bioreactor Performance.

    Science.gov (United States)

    Jones, Christopher S; Kult, Keegan J

    2016-05-01

    In recent years, the agricultural community has reduced flow of nitrogen from farmed landscapes to stream networks through the use of woodchip denitrification bioreactors. Although deployment of this practice is becoming more common to treat high-nitrate water from agricultural drainage pipes, information about bioreactor management strategies is sparse. This study focuses on the use of water monitoring, and especially the use of alkalinity monitoring, in five Iowa woodchip bioreactors to provide insights into and to help manage bioreactor chemistry in ways that will produce desirable outcomes. Results reported here for the five bioreactors show average annual nitrate load reductions between 50 and 80%, which is acceptable according to established practice standards. Alkalinity data, however, imply that nitrous oxide formation may have regularly occurred in at least three of the bioreactors that are considered to be closed systems. Nitrous oxide measurements of influent and effluent water provide evidence that alkalinity may be an important indicator of bioreactor performance. Bioreactor chemistry can be managed by manipulation of water throughput in ways that produce adequate nitrate removal while preventing undesirable side effects. We conclude that (i) water should be retained for longer periods of time in bioreactors where nitrous oxide formation is indicated, (ii) measuring only nitrate and sulfate concentrations is insufficient for proper bioreactor operation, and (iii) alkalinity monitoring should be implemented into protocols for bioreactor management.

  7. Corrosion control in water supply systems: effect of pH, alkalinity, and orthophosphate on lead and copper leaching from brass plumbing.

    Science.gov (United States)

    Tam, Y S; Elefsiniotis, P

    2009-10-01

    This study explored the potential of lead and copper leaching from brass plumbing in the Auckland region of New Zealand. A five-month field investigation, at six representative locations, indicated that Auckland's water can be characterized as soft and potentially corrosive, having low alkalinity and hardness levels and a moderately alkaline pH. More than 90% of the unflushed samples contained lead above the maximum acceptable value (MAV) of 10 microg/L (New Zealand Standards). In contrast, the copper level of unflushed samples remained consistently below the corresponding MAV of 2 mg/L. Flushing however reduced sharply metal concentrations, with lead values well below the MAV limit. Generally, metal leaching patterns showed a limited degree of correlation with the variations in temperature, dissolved oxygen and free chlorine residual at all sampling locations. Furthermore, a series of bench-scale experiments was conducted to evaluate the effectiveness of pH and alkalinity adjustment, as well as orthophosphate addition as corrosion control tools regarding lead and copper dissolution. Results demonstrated that lead and copper leaching was predominant during the first 24 hr of stagnation, but reached an equilibrium state afterwards. Since the soluble fraction of both metals was small (12% for lead, 29% for copper), it is apparent that the non-soluble compounds play a predominant role in the dissolution process. The degree of leaching however was largely affected by the variations in pH and alkalinity. At pH around neutrality, an increase in alkalinity promoted metal dissolution, while at pH 9.0 the effect of alkalinity on leaching was marginal. Lastly, addition of orthophosphate as a corrosion inhibitor was more effective at pH 7.5 or higher, resulting in approximately 70% reduction in both lead and copper concentrations.

  8. Importance of water quality in container plant production

    Science.gov (United States)

    John M. Ruter

    2013-01-01

    High substrate pH is a major problem for producers of container-grown plants and seedlings. The primary cause of high substrate pH is irrigation water with high alkalinity. Alkalinity is defined as the capacity of water to neutralize acids. Some alkalinity in irrigation water is beneficial as it serves as a buffer to large swings in pH levels, but high alkalinity in...

  9. Changes in the bacterial populations of the highly alkaline saline soil of the former lake Texcoco (Mexico) following flooding.

    Science.gov (United States)

    Valenzuela-Encinas, César; Neria-González, Isabel; Alcántara-Hernández, Rocio J; Estrada-Alvarado, Isabel; Zavala-Díaz de la Serna, Francisco Javier; Dendooven, Luc; Marsch, Rodolfo

    2009-07-01

    Flooding an extreme alkaline-saline soil decreased alkalinity and salinity, which will change the bacterial populations. Bacterial 16S rDNA libraries were generated of three soils with different electrolytic conductivity (EC), i.e. soil with EC 1.7 dS m(-1) and pH 7.80 (LOW soil), with EC 56 dS m(-1) and pH 10.11 (MEDIUM soil) and with EC 159 dS m(-1) and pH 10.02 (HIGH soil), using universal bacterial oligonucleotide primers, and 463 clone 16S rDNA sequences were analyzed phylogenetically. Library proportions and clone identification of the phyla Proteobacteria, Actinobacteria, Acidobacteria, Cyanobacteria, Bacteroidetes, Firmicutes and Cloroflexi showed that the bacterial communities were different. Species and genera of the Rhizobiales, Rhodobacterales and Xanthomonadales orders of the alpha- and gamma-subdivision of Proteobacteria were found at the three sites. Species and genera of the Rhodospirillales, Sphingobacteriales, Clostridiales, Oscillatoriales and Caldilineales were found only in the HIGH soil, Sphingomonadales, Burkholderiales and Pseudomonadales in the MEDIUM soil, Myxococcales in the LOW soil, and Actinomycetales in the MEDIUM and LOW soils. It was found that the largest diversity at the order and species level was found in the MEDIUM soil as bacteria of both the HIGH and LOW soils were found in it.

  10. Ultra-high performance supercritical fluid chromatography of lignin-derived phenols from alkaline cupric oxide oxidation.

    Science.gov (United States)

    Sun, Mingzhe; Lidén, Gunnar; Sandahl, Margareta; Turner, Charlotta

    2016-08-01

    Traditional chromatographic methods for the analysis of lignin-derived phenolic compounds in environmental samples are generally time consuming. In this work, an ultra-high performance supercritical fluid chromatography method with a diode array detector for the analysis of major lignin-derived phenolic compounds produced by alkaline cupric oxide oxidation was developed. In an analysis of a collection of 11 representative monomeric lignin phenolic compounds, all compounds were clearly separated within 6 min with excellent peak shapes, with a limit of detection of 0.5-2.5 μM, a limit of quantification of 2.5-5.0 μM, and a dynamic range of 5.0-2.0 mM (R(2) > 0.997). The new ultra-high performance supercritical fluid chromatography method was also applied for the qualitative and quantitative analysis of lignin-derived phenolic compounds obtained upon alkaline cupric oxide oxidation of a commercial humic acid. Ten out of the previous eleven model compounds could be quantified in the oxidized humic acid sample. The high separation power and short analysis time obtained demonstrate for the first time that supercritical fluid chromatography is a fast and reliable technique for the analysis of lignin-derived phenols in complex environmental samples.

  11. Highly Dispersed Palladium Nanoparticles on Functional MWNT Surfaces for Methanol Oxidation in Alkaline Solutions

    Institute of Scientific and Technical Information of China (English)

    WANG zhe; ZHU Zan-Zan; LI You-Xiang; LI Hu-Lin

    2008-01-01

    Palladium nanoparticles were crystallized on 4-aminobenzoic acid monolayer-grafted multi-walled carbon nanotubes (MWNT) by diazotization. The structure and nature of the resulting Pd/MWNT composite were characterized by transmission electron microscopy and X-ray diffraction, the results show that the chemically synthesized Pd nanoparticles were homogeneously dispersed and well-separated from one another on the modified MWNT surfaces. Cyclic voltammogram showed that the Pd-MWNT composite materials performed higher electrocatalytic activity and better long-term stability toward methanol oxidation in alkaline solution than Pd-C. The results imply that the Pd-MWNT composite materials as a promising support material improve the excellent electrocatalytic activity for methanol oxidation greatly. So the Pd/MWNT composites have a good application potential to fuel cells.

  12. A binary palladium-bismuth nanocatalyst with high activity and stability for alkaline glucose electrooxidation

    Science.gov (United States)

    Chen, Cheng-Chuan; Lin, Cheng-Lan; Chen, Lin-Chi

    2015-08-01

    Binary palladium-bismuth nanocatalysts supported on functionalized multi-walled carbon nanotubes (Pd-Bi/C) are synthesized using a one-pot polyol method. The prepared Pd-Bi/C catalysts have a metal particle range from 5.25 to 12.98 nm and are investigated for alkaline electrocatalytic glucose oxidation reaction (GOR). The physical properties of the catalysts are characterized by X-ray diffraction (XRD), scanning electron microscopy with energy-dispersive X-ray spectroscopy (SEM-EDS), transmission electron microscopy (TEM) and X-ray photoelectron spectroscopy (XPS). The electrochemical activities are determined by cyclic voltammetry (CV), linear sweep voltammetry (LSV), Tafel analysis and chronoamperomtry (CA) for comparing the electrochemical active surface area (ECSA), GOR onset potential, GOR peak current density, Tafel slope, poisoning rate and cycling stability of the Pd-Bi/C catalysts. It is found that Pd-Bi/C (1:0.14) can significantly enhance the electrocatalytic activity on GOR about 40% times higher than Pd/C and as well as has a 3.7-fold lower poisoning rate. The in-use stability of Pd-Bi/C (1:0.14) is also remarkably improved, according to the results of the 200 cycling CV test. The effects of the operating temperature and the concentration of glucose and NaOH electrolyte on Pd-Bi/C (1:0.14) are further studied in this work. The highest Pd-Bi/C catalyzed GOR current density of 29.5 mA cm-2 is attained in alkaline medium.

  13. High Throughput Plasma Water Treatment

    Science.gov (United States)

    Mujovic, Selman; Foster, John

    2016-10-01

    The troublesome emergence of new classes of micro-pollutants, such as pharmaceuticals and endocrine disruptors, poses challenges for conventional water treatment systems. In an effort to address these contaminants and to support water reuse in drought stricken regions, new technologies must be introduced. The interaction of water with plasma rapidly mineralizes organics by inducing advanced oxidation in addition to other chemical, physical and radiative processes. The primary barrier to the implementation of plasma-based water treatment is process volume scale up. In this work, we investigate a potentially scalable, high throughput plasma water reactor that utilizes a packed bed dielectric barrier-like geometry to maximize the plasma-water interface. Here, the water serves as the dielectric medium. High-speed imaging and emission spectroscopy are used to characterize the reactor discharges. Changes in methylene blue concentration and basic water parameters are mapped as a function of plasma treatment time. Experimental results are compared to electrostatic and plasma chemistry computations, which will provide insight into the reactor's operation so that efficiency can be assessed. Supported by NSF (CBET 1336375).

  14. Chronic high glucose inhibits albumin reabsorption by lysosomal alkalinization in cultured porcine proximal tubular epithelial cells (LLC-PK1).

    Science.gov (United States)

    Ishibashi, Fukashi

    2006-06-01

    Lysosomal acidification is a key step of albumin reabsorption in proximal tubular epithelial cells (PTECs). This study was performed to examine the influence of chronic high glucose on lysosomal acidification in cultured PTECs. Porcine PTECs (LLC-PK(1) cells) were cultured in 16.7 mM (300 mg/dl) glucose (HG) alone or with 0.5 mM phlorizin for 24 weeks and subsequently for 12 weeks in 5.5 mM (100 mg/dl) glucose (NG). Chronic HG inhibited the fluorescein isothiocyanate (FITC)-albumin (A) uptake progressively, while phlorizin reversed the inhibition. NG for 12 weeks after HG normalized the uptake. The time-dependent uptake of FITC-A was inhibited by HG and bafilomycin A(1) (BafA(1)) after 15 min and by 4,4'-diisothiocyanato-2,2'-disulfonic acid (DIDS) and N-ethyl-N-isopropyl-amiloride (EIPA) after 3 min. Cellular ATP was depleted by HG and restored by NG. Lysosomal pH, assessed by an acidotropic fluorescent probe, was alkalinized (pH 4.5-7.8) with 5.5-27.8 mM glucose and normalized by subsequent NG. BafA(1) alkalinized lysosomes, and the concentration required to 50% change for the pH and 50% inhibition of FITC-A uptake was similar. EIPA inhibited FITC-A uptake, but did not influence lysosomal pH. DIDS inhibited FITC-A uptake, and unexpectedly lowered lysosomal pH. Real time PCR showed that HG reduced the mRNA level for vacuolar H(+)-ATPase, but did not alter those of chloride channel-5 and Na(+)-H(+)-exchanger-3. In conclusion, the chronic HG inhibits albumin reabsorption by lysosomal alkalinization in PTECs, probably due to ATP depletion and down-regulation of vacuolar H(+)-ATPase.

  15. Microbial impacts on (99m)Tc migration through sandstone under highly alkaline conditions relevant to radioactive waste disposal.

    Science.gov (United States)

    Smith, Sarah L; Boothman, Christopher; Williams, Heather A; Ellis, Beverly L; Wragg, Joanna; West, Julia M; Lloyd, Jonathan R

    2017-01-01

    Geological disposal of intermediate level radioactive waste in the UK is planned to involve the use of cementitious materials, facilitating the formation of an alkali-disturbed zone within the host rock. The biogeochemical processes that will occur in this environment, and the extent to which they will impact on radionuclide migration, are currently poorly understood. This study investigates the impact of biogeochemical processes on the mobility of the radionuclide technetium, in column experiments designed to be representative of aspects of the alkali-disturbed zone. Results indicate that microbial processes were capable of inhibiting (99m)Tc migration through columns, and X-ray radiography demonstrated that extensive physical changes had occurred to the material within columns where microbiological activity had been stimulated. The utilisation of organic acids under highly alkaline conditions, generating H2 and CO2, may represent a mechanism by which microbial processes may alter the hydraulic conductivity of a geological environment. Column sediments were dominated by obligately alkaliphilic H2-oxidising bacteria, suggesting that the enrichment of these bacteria may have occurred as a result of H2 generation during organic acid metabolism. The results from these experiments show that microorganisms are able to carry out a number of processes under highly alkaline conditions that could potentially impact on the properties of the host rock surrounding a geological disposal facility for intermediate level radioactive waste. Copyright © 2016. Published by Elsevier B.V.

  16. Bioremediation of cadmium-contaminated water systems using intact and alkaline-treated alga (Hydrodictyon reticulatum) naturally grown in an ecosystem.

    Science.gov (United States)

    Ammari, Tarek G; Al-Atiyat, Marrwa; Abu-Nameh, Eyad S; Ghrair, Ayoup; Jaradat, Da'san; Abu-Romman, Saeid

    2017-05-04

    Cadmium can enter water, soil, and food chain in amounts harmful to human health by industrial wastes. The use of intact and NaOH-treated dried algal tissues (Hydrodictyon reticulatum), a major ecosystem bio-component, for Cd removal from aqueous solutions was characterized. Cadmium biosorption was found to be dependent on solution pH, bioadsorbent dose, the interaction between pH and dose, contact time, and initial Cd concentration. The experimental results indicated that the biosorption performance of alkaline-treated algal tissues was better than that of intact tissues. The maximum biosorption capacities were 7.40 and 12.74 mg g(-1) for intact and alkaline-treated bioadsorbents, respectively, at optimum operating conditions. Biosorption reaches equilibrium after 24 and 240 minutes of contact, respectively, for alkaline-treated and intact bioadsorbents. Cadmium biosorption was best fitted to Langmuir isotherm model (R(2) ≈ 0.99) and the kinetic study obeyed the pseudo-second-order kinetic model, which suggests chemisorption as the rate-limiting step in the biosorption process. Alkaline-treated algal tissues can be used as a new material of low-cost bioadsorbent for continuous flow rate treatment systems.

  17. Predicting Gran alkalinity and calcium concentrations in river waters over a national scale using a novel modification to the G-BASH model

    Energy Technology Data Exchange (ETDEWEB)

    Cresser, Malcolm S. [Environment Department, University of York, Heslington, York YO10 5DD (United Kingdom)]. E-mail: msc5@york.ac.uk; Ahmed, Nayan [Division of Soil Science and Agricultural Chemistry, IARI, New Delhi 110012 (India); Smart, Richard P. [Central Science Laboratory, Sand Hutton, York YO41 1LZ (United Kingdom); Arowolo, Toyin [Environment Department, University of York, Heslington, York YO10 5DD (United Kingdom); Calver, Louise J. [Environment Department, University of York, Heslington, York YO10 5DD (United Kingdom); Chapman, Pippa J. [School of Geography, University of Leeds, Woodhouse Lane, Leeds LS2 9JT (United Kingdom)

    2006-09-15

    Monthly stream water calcium and Gran alkalinity concentration data from 11 sub-catchments of the Nether Beck in the English Lake District have been used to appraise the transferability of the Scottish, River Dee-based G-BASH model. Readily available riparian zone geochemistry and flow paths were used initially to predict minimum and mean stream water concentrations at the Nether Beck, based on calibration equations from the River Dee catchment data. Predicted values significantly exceeded observed values. Differences in runoff between the two areas, leading to a dilution effect in the Nether Beck, explained most of the difference between observed and predicted values. Greater acid deposition in the Lake District also reduced stream water Gran alkalinity concentrations in that area. If regional differences in precipitation, evapotranspiration and pollutant deposition are incorporated into the model, it may then be used reliably to predict catchment susceptibility to acidification over a wide regional (national) scale. - A modified G-BASH model predicts calcium and Gran alkalinity in streams at a national scale, taking account of regional deposition and climatic variations.

  18. Simultaneous determination of total nitrogen and total phosphorus in environmental waters using alkaline persulfate digestion and ion chromatography.

    Science.gov (United States)

    De Borba, Brian M; Jack, Richard F; Rohrer, Jeffrey S; Wirt, Joan; Wang, Dongmei

    2014-11-21

    An ion chromatography (IC) method was developed for the simultaneous determination of total nitrogen and total phosphorus after alkaline persulfate digestion. This study takes advantage of advances in construction of high-resolution, high-capacity anion-exchange columns that can better tolerate the matrices typically encountered when a determination of total nitrogen and total phosphorous is required. Here, we used an electrolytically generated hydroxide eluent combined with a high-capacity, hydroxide-selective, anion-exchange column for the determination of total nitrogen (as nitrate-N) and total phosphorus (as phosphate-P) in environmental samples by IC. This method yielded LODs for nitrate-N and phosphate-P of 1.0 and 1.3 μg/L, respectively. The LOQs determined for these analytes were 3.4 and 4.2 μg/L, respectively. Due to the dilution factor required and the blank nitrate-N concentration after the persulfate digestion, the quantification limits increased for nitrate-N and phosphate-P to 171 and 63 μg/L, respectively. The suitability of the method was evaluated by determining the nitrogen and phosphorus concentrations from known concentrations of organic-containing nitrogen and phosphorus compounds. In addition, environmental samples consisting of six different wastewaters and 48 reservoir samples were evaluated for total nitrogen and phosphorus. The recoveries of nitrogen and phosphorus from the organic-containing compounds ranged from 93.1 to 100.1% and 85.2 to 97.1%, respectively. In addition, good correlation between results obtained by the colorimetric method and IC was also observed. The linearity, accuracy, and evaluation of potential interferences for determining TN and TP will be discussed.

  19. Structural and spectroscopic studies of water-alkaline earth ion micro clusters: an alternate approach using genetic algorithm in conjunction with quantum chemical methods

    Science.gov (United States)

    Ganguly Neogi, S.; Chaudhury, P.

    2014-08-01

    We present an approach of using a stochastic optimization technique namely genetic algorithm in association with quantum chemical methods to first elucidate structure and then infrared spectroscopy and thermochemistry of water-alkaline earth metal ion clusters. We show that an initial determination of structure using stochastic techniques and following it up with quantum chemical calculation can lead to much faster convergence to high quality structures for these systems. Infrared spectroscopic, thermochemical calculations and natural population analysis based charges on the central metal ions are done to further ascertain the correctness of the structures using our technique. We have done a comparative study with a pure density functional theory calculation and have shown that even for very poor starting guess geometries genetic algorithm in conjunction with density functional theory indeed converges to global structure while pure density functional theory can encounter problems in certain situations to arrive at global geometry. We have also discussed usefulness of Unimodal Normal distribution crossover for handling situation with real coded variables.

  20. An efficient route for catalytic activity promotion via hybrid electro-depositional modification on commercial nickel foam for hydrogen evolution reaction in alkaline water electrolysis

    Energy Technology Data Exchange (ETDEWEB)

    Ma, Guanshui; He, Yongwei; Wang, Mei; Zhu, Fuchun; Tang, Bin [Research Institute of Surface Engineering, Taiyuan University of Technology, Yingze West Road 79, Taiyuan 030024 (China); Wang, Xiaoguang, E-mail: wangxiaog1982@163.com [Research Institute of Surface Engineering, Taiyuan University of Technology, Yingze West Road 79, Taiyuan 030024 (China); International Iberian Nanotechnology Laboratory (INL), 4715-330 Braga (Portugal)

    2014-09-15

    Highlights: • Mono-Cu surface modification depress the HER activity of Ni-foam. • Hybrid Ni-foam/Cu0.01/Co0.05 exhibits superior HER performance. • Layer-by-layer structure may contribute to a synergistic promoting effect. - Abstract: In this paper, the single- and hybrid-layered Cu, Ni and Co thin films were electrochemically deposited onto the three-dimensional nickel foam as composite cathode catalyst for hydrogen evolution reaction in alkaline water electrolysis. The morphology, structure and chemical composition of the electrodeposited composite catalysts were investigated using X-ray diffraction (XRD), scanning electron microscopy (SEM) and energy dispersive X-ray analysis (EDX). Electrochemical measurement depicted that, for the case of the monometallic layered samples, the general activity for hydrogen evolution reaction followed the sequence: Ni-foam/Ni > Ni-foam/Co > bare Ni-foam > Ni-foam/Cu. It is noteworthy that, the hybrid-layered Ni-foam/Cu0.01/Co0.05 exhibited the highest catalytic activity towards hydrogen evolution reaction with the current density as high as 2.82 times that of the bare Ni-foam. Moreover, both excellent electrochemical and physical stabilities can also be acquired on the Ni-foam/Cu0.01/Co0.05, making this hybrid-layered composite structure as a promising HER electro-catalyst.

  1. Insights from the genome of a high alkaline cellulase producing Aspergillus fumigatus strain obtained from Peruvian Amazon rainforest.

    Science.gov (United States)

    Paul, Sujay; Zhang, Angel; Ludeña, Yvette; Villena, Gretty K; Yu, Fengan; Sherman, David H; Gutiérrez-Correa, Marcel

    2017-06-10

    Here, we report the complete genome sequence of a high alkaline cellulase producing Aspergillus fumigatus strain LMB-35Aa isolated from soil of Peruvian Amazon rainforest. The genome is ∼27.5mb in size, comprises of 228 scaffolds with an average GC content of 50%, and is predicted to contain a total of 8660 protein-coding genes. Of which, 6156 are with known function; it codes for 607 putative CAZymes families potentially involved in carbohydrate metabolism. Several important cellulose degrading genes, such as endoglucanase A, endoglucanase B, endoglucanase D and beta-glucosidase, are also identified. The genome of A. fumigatus strain LMB-35Aa represents the first whole sequenced genome of non-clinical, high cellulase producing A. fumigatus strain isolated from forest soil. Copyright © 2017 Elsevier B.V. All rights reserved.

  2. 控制加酸量稳定中水碱度%Stabilizing Reclaimed Water Alkalinity by Controlling Quantity of Adding Acid

    Institute of Scientific and Technical Information of China (English)

    刘芹; 彭旭东

    2014-01-01

    In order to save water, usage of urban reclaimed water is expanding. At present, a lot of tech-nical personnel have studied the reclaimed water using in the technology of circulating cooling water in thermal power generation. This paper introduces how to control the adding acid quantity of the reclaimed water under the large alkalinity change and not to be accurately detected, then stabilizing the reclaimed water alkalinity.%为了节约水资源,城市中水的利用领域不断扩大。目前许多技术人员对中水在火力发电生产中用于循环冷却水技术进行了较多的研究。文章介绍了在中水碱度变化大,碱度无法在线准确检测下如何控制中水的加酸量,稳定中水的碱度。

  3. High-T sub c thin films on low microwave loss alkaline-rare-earth-aluminate crystals

    Energy Technology Data Exchange (ETDEWEB)

    Sobolewski, R.; Gierlowski, P.; Kula, W.; Zarembinski, S.; Lewandowski, S.J.; Berkowski, M.; Pajaczkowska, A. (Instytut Fizyki, Polska Akatlemia Nauk, Al. Lotnikow 32/46, PL-02668 Warszawa (PL)); Gorshunov, B.P.; Lyudmirsky, D.B.; Sirotinsky, O.I. (Institute of General Physics, USSR Academy of Sciences, 38 Vavilova Street, SU-117924 Moscow (SU))

    1991-03-01

    This paper reports on the alkaline-rare-earth aluminates (K{sub 2}NiF{sub 4}-type perovskites) which are an excellent choice as the substrate material for the growth of high-T{sub c} thin films suitable for microwave and far-infrared applications. The CaNdAlO{sub 4}, and SrLaAlO{sub 4} single crystals have been grown by Czochralski pulling and fabricated into the form of (001) oriented wafers. The Y-Ba-Cu-O and Bi-Sr-Ca-Cu-O films deposited on these substrates by a single-target magnetron sputtering exhibited very good superconducting and structural properties.

  4. In-situ potentiostatic activation to optimize electrodeposited cobalt-phosphide electrocatalyst for highly efficient hydrogen evolution in alkaline media

    Science.gov (United States)

    Wei, Mengmeng; Yang, Liming; Wang, Longlu; Liu, Tian; Liu, Chengbin; Tang, Yanhong; Luo, Shenglian

    2017-08-01

    We first report a novel cobalt-phosphide (Co-P) hybrid with flake-like structure by a facile one-step electrodeposition combined with in-situ potentiostatic activation technique. Exotic microstructure transformation of Co-P hybrid from microspheres to nanosheets has been noted during the activation process. The Co-P catalyst exhibits striking kinetic metrics with an overpotential of 85 mV (at 10 mA cm-2) and Tafel slope of 37 mV dec-1, performing among the best of all the HER catalysts in strong alkaline media (at pH 14). This study offers a new in-situ approach to optimize catalytic materials for high-performance electrocatalysts towards energy-related applications.

  5. Diversity and food web structure of nematode communities under high soil salinity and alkaline pH.

    Science.gov (United States)

    Salamún, Peter; Kucanová, Eva; Brázová, Tímea; Miklisová, Dana; Renčo, Marek; Hanzelová, Vladimíra

    2014-10-01

    A long-term and intensive magnesium (Mg) ore processing in Slovenské Magnezitové Závody a.s. in Jelšava has resulted in a high Mg content and alkaline pH of the soil environment, noticeable mainly in the close vicinity of the smelter. Nematode communities strongly reacted to the contamination mostly by a decrease in abundance of the sensitive groups. Nematodes from c-p 1 group and bacterivores, tolerant to pollution played a significant role in establishing the dominance at all sites. With increasing distance from the pollution source, the nematode communities were more structured and complex, with an increase in proportion of sensitive c-p 4 and 5 nematodes, composed mainly of carnivores and omnivores. Various ecological indices (e.g. MI2-5, SI, H') indicated similar improvement of farther soil ecosystems.

  6. Continuous determination of the boiler water and industrial circulating cooling water pH value,alkalinity and chloride%锅炉水及工业循环冷却水的pH值、碱度和氯化物的连续测定

    Institute of Scientific and Technical Information of China (English)

    张居光; 吴继权; 黄容

    2013-01-01

    At automatic potentiometric titrator attached double electrodes, Using the direct potential and potentiometric titration methods, pH value, alkalinity and chloride concentration were obtained. pH combination electrode applies to the pH and alkalinity measured, and the reference pH electrode and indicator Ag electrode apply to precipitation titrated.The methods can be used for pH, alkalinity and chloride continuous determination of boiler water and industrial circulating cooling water. For high alkalinity and high chloride samples, the measured relative standard deviation is less than 0. 5%. For low alkalinity and chloride samples, the measured relative standard deviation is about 2%.%在双电极电位滴定仪上,应用直接电位法和电位滴定法依次获得pH值、碱度和氯化物浓度.pH复合电极不仅应用于pH值和碱度测定,还在沉淀滴定中发挥参比电极作用,银电极作为沉淀滴定的指示电极.该方法用于锅炉水和工业循环冷却水的pH值、碱度和氯化物连续的测定,对于碱度、氯化物浓度较高的样品,测定结果相对标准偏差小于0.5%.对于碱度、氯化物浓度较低的补水,测定结果的相对标准偏差约2%.

  7. UASB treatment of a highly alkaline fruit-cannery lye-peeling ...

    African Journals Online (AJOL)

    33 No. 2 April 2007. ISSN 1816-7950 = Water SA (on-line) ... Food-processing industries in South Africa are under increas- ing pressure to reduce the ... pollution control that wastewater purification be an integral part of industrial processes ...

  8. Cation exchange properties of zeolites in hyper alkaline aqueous media.

    Science.gov (United States)

    Van Tendeloo, Leen; de Blochouse, Benny; Dom, Dirk; Vancluysen, Jacqueline; Snellings, Ruben; Martens, Johan A; Kirschhock, Christine E A; Maes, André; Breynaert, Eric

    2015-02-03

    Construction of multibarrier concrete based waste disposal sites and management of alkaline mine drainage water requires cation exchangers combining excellent sorption properties with a high stability and predictable performance in hyper alkaline media. Though highly selective organic cation exchange resins have been developed for most pollutants, they can serve as a growth medium for bacterial proliferation, impairing their long-term stability and introducing unpredictable parameters into the evolution of the system. Zeolites represent a family of inorganic cation exchangers, which naturally occur in hyper alkaline conditions and cannot serve as an electron donor or carbon source for microbial proliferation. Despite their successful application as industrial cation exchangers under near neutral conditions, their performance in hyper alkaline, saline water remains highly undocumented. Using Cs(+) as a benchmark element, this study aims to assess the long-term cation exchange performance of zeolites in concrete derived aqueous solutions. Comparison of their exchange properties in alkaline media with data obtained in near neutral solutions demonstrated that the cation exchange selectivity remains unaffected by the increased hydroxyl concentration; the cation exchange capacity did however show an unexpected increase in hyper alkaline media.

  9. Imbalances in the hardness/alkalinity ratio of water and Nile tilapia’s growth performance - doi: 10.4025/actascitechnol.v36i1.18995

    Directory of Open Access Journals (Sweden)

    Davi de Holanda Cavalcante

    2014-01-01

    Full Text Available The present work determined the effects of water with unbalanced calcium hardness/total alkalinity (CH/TA ratio on Nile tilapia growth performance. Two unbalanced CH/TA ratios were tested for 8 weeks using one indoor system with 30 circular polyethylene 100 L tanks and one outdoor system with 36 circular polyethylene 250 L tanks. The factors and their specific levels tested were the total alkalinity of water (TA; 50 and 100 mg L-1 CaCO3 and the CH/TA ratio of water (CH/TA; 1/2, 1/1 and 5/1. In the indoor system, the 5/1 CH/TA ratio tanks had higher total ammonia nitrogen (TAN than the 1/2 or 1/1 CH/TA ratio tanks. In the outdoor system, higher concentrations of TAN were found in the 1/2 CH/TA ratio tanks. The soil of the 5/1 CH/TA ratio indoor tanks had higher concentrations of organic carbon than the 1/2 or 1/1 CH/TA ratio tanks. The detrimental effects of the 5/1 CH/TA ratio on fish growth performance were stronger than those associated with the 1/2 CH/TA ratio. A significantly better food conversion ratio was observed in the 1/1 CH/TA ratio outdoor tanks regardless of the TA level of the water.

  10. Using algae and submerged calcifying water flora for treating neutral to alkaline uranium-contaminated water; Verwendung von Algen und submersen kalzifizierenden Wasserpflanzen zur Aufbereitung neutraler bis basischer uranhaltiger Waesser

    Energy Technology Data Exchange (ETDEWEB)

    Dienemann, C.; Dienemann, H.; Stolz, L.; Dudel, E.G. [TU Dresden (DE). Inst. fuer Allgemeine Oekologie und Umweltschutz, Tharandt (Germany)

    2005-07-01

    Elimination of uranium from neutral to alkaline water is a complex technical process involving decarbonation, usually with HCl, followed by uranium removal by adding alkaline substances. In passive water treatment systems, uranium species - which often consist of a combination of oxidation and reduction stages - are not sufficiently considered. Algae and submerged water plants provide a natural alternative. They remove carbon dioxides or hydrogen carbonate, depending on the species, thus reducting the concentrations of the carbonate species. As the uranium species in alkaline water are coupled on the one hand to the carbonate species and on the other hand on the earth alkali metals, algae and submerged calcifying water plants are an excellent preliminary stage as a supplement to conventional passive water treatment systems. For a quantification of this effect, laboratory experiments were made with Cladophara spec. and with uranium concentrations of 100, 250 and 1000 {mu}g U.L{sup -1} at pH 8.3. The pH was adjusted with NaOH resp. Na2CO3 resulting in different uranium species. After 20 minutes, there was a difference in self-absorption between the different species (higher uranium concentration for NaOH than for Na2CO3), which was no longer observeable after 24 h. On the basis of data on the biomass development of macrophytic algae (Cladophora and Microspora) in a flowing river section near Neuensalz/Vogtland district, the final dimensions of a purification stage of this type are assessed. (orig.)

  11. High electrocatalytic performance of nitrogen-doped carbon nanofiber-supported nickel oxide nanocomposite for methanol oxidation in alkaline medium

    Science.gov (United States)

    Al-Enizi, Abdullah M.; Elzatahry, Ahmed A.; Abdullah, Aboubakr M.; Vinu, Ajayan; Iwai, Hideo; Al-Deyab, Salem S.

    2017-04-01

    Nitrogen-Doped Carbon Nanofiber (N-CNF)-supported NiO composite was prepared by electrospinning a sol-gel mixture of graphene and polyaniline (PANi) with aqueous solutions of Polyvinylpyrrolidone (PVP) followed by a high-temperature annealing process. The electrospun was stabilized for 2 h at 280 °C, carbonized for 5 h at 1200 °C then loaded by 10% NiO. The electrocatalytic activities of the produced nanocomposite have been studied using cyclic voltammetry, and chronoamperometry. Also, N-CNF was characterized by X-ray diffraction (XRD), thermogravimetric analysis (TGA), surface area (BET), X-ray photoelectron spectroscopy (XPS), transmission electron microscope (TEM), and scanning-electron microscopy (SEM). The obtained N-doped carbon nanofiber was found to have a nitrogen content of 2.6 atomic% with a diameter range of (140-160) nm, and a surface area (393.3 m2 g-1). In addition, it showed a high electrocatalytic behavior towards methanol oxidation reaction in alkaline medium and high stability and resistivity to the adsorption of intermediates.

  12. A High Level of Intestinal Alkaline Phosphatase Is Protective Against Type 2 Diabetes Mellitus Irrespective of Obesity.

    Science.gov (United States)

    Malo, Madhu S

    2015-12-01

    Mice deficient in intestinal alkaline phosphatase (IAP) develop type 2 diabetes mellitus (T2DM). We hypothesized that a high level of IAP might be protective against T2DM in humans. We determined IAP levels in the stools of 202 diabetic patients and 445 healthy non-diabetic control people. We found that compared to controls, T2DM patients have approx. 50% less IAP (mean +/- SEM: 67.4 +/- 3.2 vs 35.3 +/- 2.5 U/g stool, respectively; p diabetes status. With each 25 U/g decrease in stool IAP, there is a 35% increased risk of diabetes. The study revealed that obese people with high IAP (approx. 65 U/g stool) do not develop T2DM. Approx. 65% of the healthy population have diabetes', and might develop T2DM and other metabolic disorders in the near future. In conclusion, high IAP levels appear to be protective against diabetes irrespective of obesity, and a 'temporal IAP profile' might be a valuable tool for predicting 'the incipient metabolic syndrome', including 'incipient diabetes'.

  13. Improved electrodes and gas impurity investigations on alkaline electrolysers

    DEFF Research Database (Denmark)

    Reissner, R.; Schiller, G.; Knoeri, T.;

    Alkaline water electrolysis for hydrogenproduction is a well-established techniquebut some technological issues regarding thecoupling of alkaline water electrolysis andRenewable Energy Sources (RES) remain tobe improved....

  14. Alkaline Exchange Membrane (AEM) for High-Efficiency Fuel Cells, Electrolyzers and Regenerative Fuel Cell Systems Project

    Data.gov (United States)

    National Aeronautics and Space Administration — Develop an alkaline exchange membrane (AEM)for use as a polymer electrolyte in both fuel cell and electrolyzer systems.  The ultimate goal in AEM development is...

  15. Single or paired increase of total alkalinity and hardness of water for cultivation of Nile tilapia juveniles, Oreochromis niloticus - doi: 10.4025/actascitechnol.v34i2.12003

    Directory of Open Access Journals (Sweden)

    Davi de Holanda Cavalcante

    2012-03-01

    Full Text Available The present work aimed at evaluating the effects of single or paired increase of water’s total alkalinity (TA and total hardness (TH on the performance of Nile tilapia juveniles’ growth and culture water quality. Twenty five 25-L outdoor polyethylene aquaria were used to hold experimental fish (0.82 ± 0.06 g; 10 fish per aquarium for 6 weeks. There were two conditions of TA (low or high and of TH (moderate or high in the culture water, obtained by the application of different salts (CaCO3, Na2CO3 and CaSO4 upon a previously acidified water, all at the same rate. Water quality and growth performance variables were observed in each replicate. The acidification of the supply water with HCl has resulted in significantly lower final body weight (p < 0.05. Except for the Na2CO3, growth performance of tilapia has improved significantly after CaCO3 liming or CaSO4 application (p < 0.05 and no significant difference was detected between these last two fish groups (p > 0.05. It was concluded that beyond a minimum level of TA (≥ 20 mg L-1 CaCO3 and TH (≥ 20 mg L-1 CaCO3, it is also important that fish culture waters have a TH/TA ratio higher than 1.

  16. Effects of co-application of biosolids and water treatment residuals on corn growth and bioavailable phosphorus and aluminum in alkaline soils in egypt.

    Science.gov (United States)

    Mahdy, A M; Elkhatib, E A; Fathi, N O; Lin, Z-Q

    2009-01-01

    The co-application of biosolids and water treatment residuals (WTRs) has been previously trialed to reduce excessive bioavailable P in the soil treated with biosolids. However, uncertainty still exists regarding the environmental consequences of the co-application of biosolids and WTRs, especially in alkaline soils in Egypt or the Middle East region. A greenhouse pot study was conducted with Egyptian alkaline soils to (i) quantify the effects of co-application of biosolids and drinking WTRs on biomass production of corn (Zea mays L. cultivar single hybrid 10), (ii) determine the co-application effects on Olsen-P and KCl-extractable Al in relation to their accumulation in plant tissues, and (iii) optimize the co-application ratio of biosolids to WTRs for the best yield and effective reduction of soil bioavailable P. The results show that, among the studied soils treated with 1% biosolids along with various rates of WTRs, the corn yield increased significantly (P soil water holding capacity that increased with the addition of WTRs. Phosphorus uptake by plants significantly (P soils that were treated with 1, 2, or 3% WTRs. The application of 4% WTRs in the biosolid-amended soils resulted in a significant reduction in soil Olsen-P values, but without having observable phytotoxicity of metals (such as Al) to corn during the growth period. The effective co-application ratio of biosolids to WTRs, for increasing corn yield and minimizing the potential for bioavailable P in runoff, was approximately 1:1 at the application rate of 3% biosolids and 4% WTRs in the alkaline soils.

  17. High Temperature and Pressure Alkaline Electrochemical Reactor for Conversion of Power to Chemicals

    DEFF Research Database (Denmark)

    Chatzichristodoulou, Christodoulos

    2016-01-01

    Moving away from fossil fuels requires harvesting more and more intermittent renewable energy resources and establishing a sustainable system for the production of chemicals. This brings forward the need for efficient large scale energy storage technologies 1-3 and technologies for the conversion...... of renewable electricity to chemicals. Electrochemical reactors can play a crucial role in this endeavor, since they can efficiently and reversibly transform electricity to high-value chemicals, and thus serve as energy storage and recovery devices for balancing the grid, while offering a means...

  18. High level extracellular production of a recombinant alkaline catalase in E. coli BL21 under ethanol stress and its application in hydrogen peroxide removal after cotton fabrics bleaching.

    Science.gov (United States)

    Yu, Zhenxiao; Zheng, Hongchen; Zhao, Xingya; Li, Shufang; Xu, Jianyong; Song, Hui

    2016-08-01

    The effects of induction parameters, osmolytes and ethanol stress on the productivity of the recombinant alkaline catalase (KatA) in Escherichia coli BL21 (pET26b-KatA) were investigated. The yield of soluble KatA was significantly enhanced by 2% ethanol stress. And a certain amount of Triton X-100 supplementation could markedly improved extracellular ratio of KatA. A total soluble catalase activity of 78,762U/mL with the extracellular ratio of 92.5% was achieved by fed-batch fermentation in a 10L fermentor, which was the highest yield so far. The purified KatA showed high stability at 50°C and pH 6-10. Application of KatA for elimination of H2O2 after cotton fabrics bleaching led to less consumption of water, steam and electric power by 25%, 12% and 16.7% respectively without productivity and quality losing of cotton fabrics. Thus, the recombinant KatA is a promising candidate for industrial production and applications.

  19. A multi-scale model of the oxygen reduction reaction on highly active graphene nanosheets in alkaline conditions

    Science.gov (United States)

    Vazquez-Arenas, Jorge; Ramos-Sanchez, Guadalupe; Franco, Alejandro A.

    2016-10-01

    A multi-scale model based on a mean field approach, is proposed to describe the ORR mechanism on N-GN catalysts in alkaline media. The model implements activation energies calculated with Density Functional Theory (DFT) at the atomistic level, and scales up them into a continuum framework describing the cathode/electrolyte interface at the mesoscale level. The model also considers mass and momentum transports arising in the region next to the rotating electrode for all ionic species and O2; correction of potential drop and electrochemical double-layer capacitance. Most fitted parameters describing the kinetics of ORR elementary reactions are sensitive in the multi-scale model, which results from the incorporation of activation energies using the mean field method, unlike single-scale modelling Errors in the deviations from activation energies are found to be moderate, except for the elementary step (2) related to the formation of O2ads, which can be assigned to the inherent DFT limitations. The consumption of O2ads to form OOHads is determined as the rate-determining step as a result of its highest energy barrier (163.10 kJ mol-1) in the system, the largest error obtained for the deviation from activation energy (28.15%), and high sensitivity. This finding is confirmed with the calculated surface concentration and coverage of electroactive species.

  20. Tissue non-specific alkaline phosphatase production by human dental pulp stromal cells is enhanced by high density cell culture.

    Science.gov (United States)

    Tomlinson, Matthew J; Dennis, Caitriona; Yang, Xuebin B; Kirkham, Jennifer

    2015-08-01

    The cell surface hydrolase tissue non-specific alkaline phosphatase (TNAP) (also known as MSCA-1) is used to identify a sub-population of bone marrow stromal cells (BMSCs) with high mineralising potential and is found on subsets of cells within the dental pulp. We aim to determine whether TNAP is co-expressed by human dental pulp stromal cells (hDPSCs) alongside a range of BMSC markers, whether this is an active form of the enzyme and the effects of culture duration and cell density on its expression. Cells from primary dental pulp and culture expanded hDPSCs expressed TNAP. Subsequent analyses revealed persistent TNAP expression and co-expression with BMSC markers such as CD73 and CD90. Flow cytometry and biochemical assays showed that increased culture durations and cell densities enhanced TNAP expression by hDPSCs. Arresting the hDPSC cell cycle also increased TNAP expression. These data confirm that TNAP is co-expressed by hDPSCs together with other BMSC markers and show that cell density affects TNAP expression levels. We conclude that TNAP is a potentially useful marker for hDPSC selection especially for uses in mineralised tissue regenerative therapies.

  1. Microprofiles of oxygen, redox potential, and pH, and microbial fermentation products in the highly alkaline gut of the saprophagous larva of Penthetria holosericea (Diptera: Bibionidae).

    Science.gov (United States)

    Šustr, Vladimír; Stingl, Ulrich; Brune, Andreas

    2014-08-01

    The saprophagous larvae of bibionid flies harbor bacteria in their alkaline intestinal tracts, but little is known about the contribution of the gut microbiota to the digestion of their recalcitrant diet. In this study, we measured oxygen and hydrogen partial pressure, redox potential and pH in the midgut, gastric caeca and hindgut of larvae of the bibionid fly Penthetria holosericea with Clark-type O2 and H2 microsensors, platinum redox microelectrodes, and LIX-type pH microelectrodes. The center of the midgut lumen was anoxic, whereas gastric caeca and hindgut were hypoxic. However, redox potential profiles indicated oxidizing conditions throughout the gut, with lowest values in the midgut (+20 to +60mV). Hydrogen production was not detected. The midgut was extremely alkaline (pH around 11), whereas hindgut and gastric caeca were neutral to slightly alkaline. While HPLC analysis showed high concentrations of glucose in the midgut (15mM) and gastric caeca (27mM), the concentrations of microbial fermentation products such as lactate (2-4mM), acetate (larva of P. holosericea, which feeds selectively on decomposed leaves and its own microbe-rich faeces, differs fundamentally from those of detritivorous and humivorous insects, which host a highly active, fermentative microbiota in their alkaline midgut or hindgut compartments.

  2. Technetium in alkaline, high-salt, radioactive tank waste supernate: Preliminary characterization and removal

    Energy Technology Data Exchange (ETDEWEB)

    Blanchard, D.L. Jr.; Brown, G.N.; Conradson, S.D. [and others

    1997-01-01

    This report describes the initial work conducted at Pacific Northwest National Laboratory to study technetium (Tc) removal from Hanford tank waste supernates and Tc oxidation state in the supernates. Filtered supernate samples from four tanks were studied: a composite double shell slurry feed (DSSF) consisting of 70% from Tank AW-101, 20% from AP-106, and 10% from AP-102; and three complexant concentrate (CC) wastes (Tanks AN-107, SY-101, ANS SY-103) that are distinguished by having a high concentration of organic complexants. The work included batch contacts of these waste samples with Reillex{trademark}-HPQ (anion exchanger from Reilly Industries) and ABEC 5000 (a sorbent from Eichrom Industries), materials designed to effectively remove Tc as pertechnetate from tank wastes. A short study of Tc analysis methods was completed. A preliminary identification of the oxidation state of non-pertechnetate species in the supernates was made by analyzing the technetium x-ray absorption spectra of four CC waste samples. Molybdenum (Mo) and rhenium (Re) spiked test solutions and simulants were tested with electrospray ionization-mass spectrometry to evaluate the feasibility of the technique for identifying Tc species in waste samples.

  3. Short-term effect of vermicompost application on biological properties of an alkaline soil with high lime content from Mediterranean region of Turkey.

    Science.gov (United States)

    Uz, Ilker; Tavali, Ismail Emrah

    2014-01-01

    This study was conducted to investigate direct short-term impact of vermicompost on some soil biological properties by monitoring changes after addition of vermicompost as compared to farmyard manure in an alkaline soil with high lime content from semiarid Mediterranean region of Turkey. For this purpose, mixtures of soil and organic fertilizers in different doses were incubated under greenhouse condition. Soil samples collected in regular intervals were analyzed for biological parameters including dehydrogenase, β-glucosidase, urease, alkaline phosphatase activities, and total number of aerobic mesophilic bacteria. Even though soil dehydrogenase activity appeared to be dose-independent based on overall evaluation, organic amendments were found to elevate dehydrogenase activity when sampling periods are evaluated individually. β-glucosidase, urease, alkaline phosphatase activity, and aerobic mesophilic bacterial numbers in vermicompost treatments fluctuated but remained significantly above the control. A slight but statistically significant difference was detected between organic amendments in terms of urease activity. Vermicompost appeared to more significantly increase bacterial number in soil. Clearly, vermicompost has a potential to be used as an alternative to farmyard manure to improve and maintain soil biological activity in alkaline calcareous soils from the Mediterranean region of Turkey. Further studies are needed to assess its full potential for these soils.

  4. Microprofiles of oxygen, redox potential, and pH, and microbial fermentation products in the highly alkaline gut of the saprophagous larva of Penthetria holosericea (Diptera: Bibionidae)

    KAUST Repository

    Šustr, Vladimír

    2014-08-01

    The saprophagous larvae of bibionid flies harbor bacteria in their alkaline intestinal tracts, but little is known about the contribution of the gut microbiota to the digestion of their recalcitrant diet. In this study, we measured oxygen and hydrogen partial pressure, redox potential and pH in the midgut, gastric caeca and hindgut of larvae of the bibionid fly Penthetria holosericea with Clark-type O2 and H2 microsensors, platinum redox microelectrodes, and LIX-type pH microelectrodes. The center of the midgut lumen was anoxic, whereas gastric caeca and hindgut were hypoxic. However, redox potential profiles indicated oxidizing conditions throughout the gut, with lowest values in the midgut (+20 to +60mV). Hydrogen production was not detected. The midgut was extremely alkaline (pH around 11), whereas hindgut and gastric caeca were neutral to slightly alkaline. While HPLC analysis showed high concentrations of glucose in the midgut (15mM) and gastric caeca (27mM), the concentrations of microbial fermentation products such as lactate (2-4mM), acetate (<1mM) and succinate (<0.5mM) were low in all gut regions, suggesting that the contribution of microorganisms to the digestive process, particularly in the alkaline midgut, is only of minor importance. We conclude that the digestive strategy of the saprophytic larva of P. holosericea, which feeds selectively on decomposed leaves and its own microbe-rich faeces, differs fundamentally from those of detritivorous and humivorous insects, which host a highly active, fermentative microbiota in their alkaline midgut or hindgut compartments. © 2014 Elsevier Ltd.

  5. Production of high quality water for oil sands application

    Energy Technology Data Exchange (ETDEWEB)

    Beaudette-Hodsman, C.; Macleod, B. [Pall Corp., Mississauga, ON (Canada); Venkatadri, R. [Pall Corp., East Hills, NY (United States)

    2008-10-15

    This paper described a pressurized microfiltration membrane system installed at an oil sands extraction site in Alberta. The system was designed to complement a reverse osmosis (RO) system installed at the site to produce the high quality feed water required by the system's boilers. Groundwater in the region exhibited moderate total suspended solids and high alkalinity and hardness levels, and the RO system required feed water with a silt density index of 3 or less. The conventional pretreatment system used at the site was slowing down production due to the severe fouling of the RO membranes. The new microfiltration system contained an automated PVDF hollow fiber microfiltration membrane system contained in a trailer. Suspended particles and bacteria were captured within the filter, and permeate was sent to the RO unit. Within 6 hours of being installed, the unit was producing water with SDI values in the range of 1.0 to 2.5. It was concluded that the microfiltration system performed reliably regardless of wide variations in feed water quality and flow rates. 3 refs., 1 tab., 8 figs.

  6. Environmentally Asisted Cracking Behavior of Nickel Alloys in Simulated Acidic and Alkaline Ground Waters Using U-bend Specimens

    Energy Technology Data Exchange (ETDEWEB)

    Fix, D V; Estill, J C; Hust, G A; Wong, L L; Rebak, R B

    2003-10-17

    The model for the degradation of the containers for nuclear waste includes three modes of corrosion, namely general corrosion, localized corrosion and environmentally assisted cracking (EAC). The objective of the current research was to quantify the susceptibility of five nickel alloys to EAC in several environmental conditions with varying solution composition, temperature and electrochemical potential. These alloys included: Alloy 22 (N06022), Alloy C-4 (N06455), Alloy 625 (N06625), Alloy G-3 (N06985) and Alloy 825 (N08825). The susceptibility to EAC was evaluated using constant deformation (deflection) U-bend specimens in both the non-welded (wrought) and welded conditions. Results show that after more than five years exposure in the vapor and liquid phases of alkaline (pH {approx} 10) and acidic (pH {approx} 3) multi-ionic environments at 60 C and 90 C, none of the tested alloys suffered environmentally assisted cracking.

  7. Effects of water hardness, alkalinity, and dissolved organic carbon on the toxicity of copper to the lateral line of developing fish.

    Science.gov (United States)

    Linbo, Tiffany L; Baldwin, David H; McIntyre, Jenifer K; Scholz, Nathaniel L

    2009-07-01

    Conventional water chemistry parameters such as hardness, alkalinity, and organic carbon are known to affect the acutely lethal toxicity of copper to fish and other aquatic organisms. In the present study, we investigate the influence of these water chemistry parameters on short-term (3 h), sublethal (0-40 microg/L) copper toxicity to the peripheral mechanosensory system of larval zebrafish (Danio rerio) using an in vivo fluorescent marker of lateral line sensory neuron (hair cell) integrity. We studied the influence of hardness (via CaCl2, MgSO4, or both at a 2:1 molar ratio), sodium (via NaHCO3 or NaCl), and organic carbon on copper-induced neurotoxicity to zebrafish lateral line neurons over a range of environmentally relevant water chemistries. For all water parameters but organic carbon, the reductions in copper toxicity, although statistically significant, were small. Increasing organic carbon across a range of environmentally relevant concentrations (0.1-4.3 mg/L) increased the EC50 for copper toxicity (the effective concentration resulting in a 50% loss of hair cells) from approximately 12 microg/L to approximately 50 microg/L. Finally, we used an ionoregulatory-based biotic ligand model to compare copper toxicity mediated by targets in the fish gill and lateral line. Relative to copper toxicity via the gill, we find that individual water chemistry parameters are less influential in terms of reducing cytotoxic impacts to the mechanosensory system.

  8. FeS anchored reduced graphene oxide nanosheets as advanced anode material with superior high-rate performance for alkaline secondary batteries

    Science.gov (United States)

    Shangguan, Enbo; Guo, Litan; Li, Fei; Wang, Qin; Li, Jing; Li, Quanmin; Chang, Zhaorong; Yuan, Xiao-Zi

    2016-09-01

    A new nanocomposite formulation of the iron-based anode for alkaline secondary batteries is proposed. For the first time, FeS nanoparticles anchored on reduced graphene oxide (RGO) nanosheets are synthesized via a facile, environmentally friendly direct-precipitation approach. In this nanocomposite, FeS nanoparticles are anchored uniformly and tightly on the surface of RGO nanosheets. As an alkaline battery anode, the FeS@RGO electrode delivers a superior high-rate charge/discharge capability and outstanding cycling stability, even at a condition without any conductive additives and a high electrode loading of ∼40 mg cm-2. At high charge/discharge rates of 5C, 10C and 20C (6000 mA g-1), the FeS@RGO electrode presents a specific capacity of ∼288, 258 and 220 mAh g-1, respectively. Moreover, the FeS@RGO electrode exhibits an admirable long cycling stability with a superior capacity retention of 87.6% for 300 cycles at a charge/discharge rate of 2C. The excellent electrochemical properties of the FeS@RGO electrode can be stemmed from the high specific surface area, peculiar electric conductivity and robust sheet-anchored structure of the FeS@RGO nanocomposite. By virtue of its superior fast charge/discharge properties, the FeS@RGO nanocomposite is suitable as an advanced anode material for high-performance alkaline secondary batteries.

  9. Towards highly efficient water photoelectrolysis

    Science.gov (United States)

    Elavambedu Prakasam, Haripriya

    ethylene glycol resulted in remarkable growth characteristics of titania nanotube arrays, hexagonal closed packed up to 1 mm in length, with tube aspect ratios of approximately 10,000. For the first time, complete anodization of the starting titanium foil has been demonstrated resulting in back to back nanotube array membranes ranging from 360 mum--1 mm in length. The nanotubes exhibited growth rates of up to 15 mum/hr. A detailed study on the factors affecting the growth rate and nanotube dimensions is presented. It is suggested that faster high field ionic conduction through a thinner barrier layer is responsible for the higher growth rates observed in electrolytes containing ethylene glycol. Methods to fabricate free standing, titania nanotube array membranes ranging in thickness from 50 microm--1000 mum has also been an outcome of this dissertation. In an effort to combine the charge transport properties of titania with the light absorption properties of iron (III) oxide, films comprised of vertically oriented Ti-Fe-O nanotube arrays on FTO coated glass substrates have been successfully synthesized in ethylene glycol electrolytes. Depending upon the Fe content the bandgap of the resulting films varied from about 3.26 to 2.17 eV. The Ti-Fe oxide nanotube array films demonstrated a photocurrent of 2 mA/cm2 under global AM 1.5 illumination with a 1.2% (two-electrode) photoconversion efficiency, demonstrating a sustained, time-energy normalized hydrogen evolution rate by water splitting of 7.1 mL/W·hr in a 1 M KOH solution with a platinum counter electrode under an applied bias of 0.7 V. The Ti-Fe-O material architecture demonstrates properties useful for hydrogen generation by water photoelectrolysis and, more importantly, this dissertation demonstrates that the general nanotube-array synthesis technique can be extended to other ternary oxide compositions of interest for water photoelectrolysis.

  10. Multi-dimensional water quality assessment of an urban drinking water source elucidated by high resolution underwater towed vehicle mapping.

    Science.gov (United States)

    Lock, Alan; Spiers, Graeme; Hostetler, Blair; Ray, James; Wallschläger, Dirk

    2016-04-15

    Spatial surveys of Ramsey Lake, Sudbury, Ontario water quality were conducted using an innovative underwater towed vehicle (UTV) equipped with a multi-parameter probe providing real-time water quality data. The UTV revealed underwater vent sites through high resolution monitoring of different spatial chemical characteristics using common sensors (turbidity, chloride, dissolved oxygen, and oxidation/reduction sensors) that would not be feasible with traditional water sampling methods. Multi-parameter probe vent site identification is supported by elevated alkalinity and silica concentrations at these sites. The identified groundwater vent sites appear to be controlled by bedrock fractures that transport water from different sources with different contaminants of concern. Elevated contaminants, such as, arsenic and nickel and/or nutrient concentrations are evident at the vent sites, illustrating the potential of these sources to degrade water quality.

  11. LCMS-QTOF Determination of Lentinan-Like β-D-Glucan Content Isolated by Hot Water and Alkaline Solution from Tiger’s Milk Mushroom, Termite Mushroom, and Selected Local Market Mushrooms

    OpenAIRE

    Nor Azreen Mohd Jamil; Norasfaliza Rahmad; Noraswati Mohd Nor Rashid; Mohd Hafis Yuswan Mohd Yusoff; Nur Syahidah Shaharuddin; Norihan Mohd Saleh

    2013-01-01

    Lentinan, 1152 Dalton β-D-glucan found in Shiitake Mushroom (Lentinus edodes), has been claimed to have anticancer and immunomodulatory activity. Several extraction methods have been used by researchers to isolate Lentinan including hot water and alkaline solution (1.25 M NaOH). In this study, hot water and alkaline solution (1.25 M NaOH) were used to extract the Lentinan-like β-D-glucan (1151 Dalton) from Tiger’s Milk Mushroom, Termite Mushroom, and selected local market mushrooms. The isola...

  12. Facilitated alkali ion transfer at the water 1,2-dichloroethane interphase Ab-initio calculations concerning alkaline metal cation - 1,10-phenanthroline complexes

    CERN Document Server

    Sánchez, C; Baruzzi, A M; Leiva, E P M

    1997-01-01

    A series of calculations on the energetics of complexation of alkaline metals with 1,10-phenanthroline are presented. It is an experimental fact that the ordering of the free energy of transfer across the water - 1,2-dichloroethane interphase is governed by the charge / size ratio of the diferent cations; the larger cations showing the lower free energy of transfer. This ordering of the free energies of transfer is reverted in the presence of 1,10-phenanthroline in the organic phase. We have devised a thermodynamic cycle for the transfer process and by means of ab-initio calculations have drawn the conclusion that in the presence of phen the free energy of transfer is governed by the stability of the PHEN/M $^{+}$complex, which explains the observed tendency from a theoretical point of view.

  13. Determination of water and alkaline extractable atmospheric humic-like substances with the TU Vienna HULIS analyzer in samples from six background sites in Europe

    Science.gov (United States)

    Feczko, T.; Puxbaum, H.; Kasper-Giebl, A.; Handler, M.; Limbeck, A.; GelencséR, A.; Pio, C.; Preunkert, S.; Legrand, M.

    2007-12-01

    With a newly developed method based on the combination of two separation steps (by polarity and by acidity) with a universal detector for organic carbon, efficient isolation of humic-like substances (HULIS) from the matrix and quantitative determination of the isolated organic carbon is achieved. This new method was applied to determine the water extractable (HULISWS) and, in sequence, the 0.1 M NaOH alkaline extractable HULIS (HULISAS) fractions in aerosol from six sites situated at a transect from west to east across Europe. The sum of the two HULIS fractions is here defined as total HULIS (HULIST). The lowest 12-month average concentrations of HULIST ranged from 0.075 μgC/m3 the Azores (Portugal) to 1.7 μgC/m3 at the continental background site K-puszta (Hungary). On the continent, the HULIST concentration decreases exponentially with elevation. The relative amounts of water extractable and alkaline soluble HULIS were relatively similar at the six sites. Dramatic differences were observed for the seasonal variations of the HULIS fractions at the different sites. At the Azores, as well as at the higher mountain sites (1450 and 3100 m), a summer maximum of the HULIST concentration was observed, while at the continental low-level sites (Aveiro and K-puszta), winter maxima dominated the seasonal variation. The summer/winter ratio of the HULIST concentration varied from 7.1 at Sonnblick to 0.36 at Aveiro. The seasonal variation at the two continental lower-level sites with winter maxima might be explained by overlapping of a weaker summer source and a stronger winter source.

  14. Influence of Oil Viscosity on Alkaline Flooding for Enhanced Heavy Oil Recovery

    Directory of Open Access Journals (Sweden)

    Yong Du

    2013-01-01

    Full Text Available Oil viscosity was studied as an important factor for alkaline flooding based on the mechanism of “water drops” flow. Alkaline flooding for two oil samples with different viscosities but similar acid numbers was compared. Besides, series flooding tests for the same oil sample were conducted at different temperatures and permeabilities. The results of flooding tests indicated that a high tertiary oil recovery could be achieved only in the low-permeability (approximately 500 mD sandpacks for the low-viscosity heavy oil (Zhuangxi, 390 mPa·s; however, the high-viscosity heavy oil (Chenzhuang, 3450 mPa·s performed well in both the low- and medium-permeability (approximately 1000 mD sandpacks. In addition, the results of flooding tests for the same oil at different temperatures also indicated that the oil viscosity put a similar effect on alkaline flooding. Therefore, oil with a high-viscosity is favorable for alkaline flooding. The microscopic flooding test indicated that the water drops produced during alkaline flooding for oils with different viscosities differed significantly in their sizes, which might influence the flow behaviors and therefore the sweep efficiencies of alkaline fluids. This study provides an evidence for the feasibility of the development of high-viscosity heavy oil using alkaline flooding.

  15. Processing Methods of Alkaline Hydrolysate from Rice Husk

    Directory of Open Access Journals (Sweden)

    Olga D. Arefieva

    2017-07-01

    Full Text Available This paper devoted to finding processing methods of alkaline hydrolysate produced from rice husk pre-extraction, and discusses alkaline hydrolysate processing schemed and disengagement of some products: amorphous silica of various quality, alkaline lignin, and water and alkaline extraction polysaccharides. Silica samples were characterized: crude (air-dried, burnt (no preliminary water treatment, washed in distilled water, and washed in distilled water and burnt. Waste water parameters upon the extraction of solids from alkaline hydrolysate dropped a few dozens or thousand times depending on the applied processing method. Color decreased a few thousand times, turbidity was virtually eliminated, chemical oxygen demanded about 20–136 times; polyphenols content might decrease 50% or be virtually eliminated. The most prospective scheme obtained the two following solid products from rice husk alkaline hydrolysate: amorphous silica and alkaline extraction polysaccharide. Chemical oxygen demand of the remaining waste water decreased about 140 times compared to the silica-free solution.

  16. Methods of use of calcium hexa aluminate refractory linings and/or chemical barriers in high alkali or alkaline environments

    Science.gov (United States)

    McGowan, Kenneth A; Cullen, Robert M; Keiser, James R; Hemrick, James G; Meisner, Roberta A

    2013-10-22

    A method for improving the insulating character/and or penetration resistance of a liner in contact with at least one of an alkali and/or alkaline environments is provided. The method comprises lining a surface that is subject to wear by an alkali environment and/or an alkaline environment with a refractory composition comprising a refractory aggregate consisting essentially of a calcium hexa aluminate clinker having the formula CA.sub.6, wherein C is equal to calcium oxide, wherein A is equal to aluminum oxide, and wherein the hexa aluminate clinker has from zero to less than about fifty weight percent C.sub.12A.sub.7, and wherein greater than 98 weight percent of the calcium hexa aluminate clinker having a particle size ranging from -20 microns to +3 millimeters, for forming a liner of the surface. This method improves the insulating character/and or penetration resistance of the liner.

  17. Hollow raspberry-like PdAg alloy nanospheres: High electrocatalytic activity for ethanol oxidation in alkaline media

    Science.gov (United States)

    Peng, Cheng; Hu, Yongli; Liu, Mingrui; Zheng, Yixiong

    2015-03-01

    Palladium-silver (PdAg) alloy nanospheres with unique structure were prepared using a one-pot procedure based on the galvanic replacement reaction. Their electrocatalytic activity for ethanol oxidation in alkaline media was evaluated. The morphology and crystal structure of the samples were characterized by scanning electron microscopy (SEM), transmission electron microscopy (TEM) and X-ray diffraction (XRD). Electrochemical characterization techniques, including cyclic voltammetry (CV) and chronoamperometry (CA) measurements were used to analyze the electrochemical performance of the PdAg alloy nanospheres. The SEM and TEM images showed that the PdAg alloy nanospheres exhibit a hierarchical nanostructure with hollow interiors and porous walls. Compared to the commercial Pd/C catalyst, the as-prepared PdAg alloy nanospheres exhibit superior electrocatalytic activity and stability towards ethanol electro-oxidation in alkaline media, showing its potential as a new non-Pt electro-catalyst for direct alcohol fuel cells (DAFCs).

  18. In situ generation of steam and alkaline surfactant for enhanced oil recovery using an exothermic water reactant (EWR)

    Science.gov (United States)

    Robertson, Eric P

    2011-05-24

    A method for oil recovery whereby an exothermic water reactant (EWR) encapsulated in a water soluble coating is placed in water and pumped into one or more oil wells in contact with an oil bearing formation. After the water carries the EWR to the bottom of the injection well, the water soluble coating dissolves and the EWR reacts with the water to produce heat, an alkali solution, and hydrogen. The heat from the EWR reaction generates steam, which is forced into the oil bearing formation where it condenses and transfers heat to the oil, elevating its temperature and decreasing the viscosity of the oil. The aqueous alkali solution mixes with the oil in the oil bearing formation and forms a surfactant that reduces the interfacial tension between the oil and water. The hydrogen may be used to react with the oil at these elevated temperatures to form lighter molecules, thus upgrading to a certain extent the oil in situ. As a result, the oil can flow more efficiently and easily through the oil bearing formation towards and into one or more production wells.

  19. Application of Alkaline Waterflooding to a High Acidity Crude Oil Application de l'injection d'eau alcaline au cas d'un pétrole brut à forte acidité

    Directory of Open Access Journals (Sweden)

    Abdel-Waly A.

    2006-11-01

    Full Text Available The main objective of this work was to study the enhanced recovery of a high acidity crude oil (South Geisum crude by alkaline solutions. Different properties of South Geisum crude oil, namely acidity, interfacial tension, and contact angle, were investigated. Displacement tests were carried out to study the effect of alkaline slug concentration, slug size, oil alkali type, and temperature viscosity on recovery. South Geisum crude oil is a highly acidic crude (4. 38 mg KOH/g. It was found that the interfacial tension between crude oil and formation water decreases with increasing alkaline concentration until it reaches a minimum, after which it increases again with a further increase in alkaline concentration. Interfacial tension between crude oil and displacement water also decreases with increasing alkaline concentration. Contact angle measurements indicated oil-wetting conditions that increase by the addition of alkaline solutions. Displacement floods showed that, at the early stages of displacement, oil recovery increases with increasing alkaline concentration until it reaches a maximum at 4 % by weight NaOH concentration. Also, at such early stages, an excessive increase in alkaline concentration results in lower oil recovery. On the other hand, after the injection of many pore volumes of water, oil recovery is almost the same regardless of the alkaline concentration. It was found also that oil recovery increases with increasing alkaline slug size until it reaches a maximum at 15 % PV, after which increasing slug size results in decreasing oil recovery (this result has not as yet been reported in the literature. Sodium hydroxide slugs produce more oil recovery than sodium carbonate slugs. Oil recovery increases with increasing temperature (from 25 to 55°C and decreasing oil viscosity. Cet article traite de la récupération, au moyen de solutions alcalines, d'un pétrole brut à forte acidité (brut de Geisum-Sud. Différentes propri

  20. The Effect of Orthophosphate as a Copper Corrosion Inhibitor in High Alkalinity Drinking Water Systems

    Science.gov (United States)

    2007-03-01

    in the near future. 7 2.2. Human Health Concerns In the human body, copper is a component of proteins that perform a range of functions...chloroorganics and chloramines , as well as free available chlorine) following a three-minute reaction time and a DPD Total Chlorine Reagent packet

  1. Comparison of in vitro behavior of as-sprayed, alkaline-treated and collagen-treated bioceramic coatings obtained by high velocity oxy-fuel spray

    Energy Technology Data Exchange (ETDEWEB)

    Melero, H., E-mail: hortensia.melero.correas@gmail.com [Thermal Spray Centre, Universitat de Barcelona, Martí i Franqués, 1, 08028 Barcelona (Spain); Garcia-Giralt, N. [URFOA, IMIM (Institut Hospital del Mar d’Investigacions Mèdiques), RETICEF, Doctor Aiguader, 80, 08003 Barcelona (Spain); Fernández, J. [Thermal Spray Centre, Universitat de Barcelona, Martí i Franqués, 1, 08028 Barcelona (Spain); Díez-Pérez, A. [URFOA, IMIM (Institut Hospital del Mar d’Investigacions Mèdiques), RETICEF, Doctor Aiguader, 80, 08003 Barcelona (Spain); Servei de Medicina Interna, Hospital del Mar, Barcelona (Spain); Guilemany, J.M. [Thermal Spray Centre, Universitat de Barcelona, Martí i Franqués, 1, 08028 Barcelona (Spain)

    2014-07-01

    Hydroxyapatite (HAp)–TiO{sub 2} samples obtained using high velocity oxy-fuel spray (HVOF), that had previously shown excellent mechanical behaviour, were innovatively surface treated in order to improve their biological performance. The chosen treatments were an alkaline treatment to increase –OH radicals density on the surface (especially on TiO{sub 2} zones), and a collagen treatment to bond collagen fibrils to the –OH radicals present in hydroxyapatite. These coatings were analysed using scanning electron microscopy, energy-dispersive X-ray spectroscopy and infrared spectroscopy, and tested for human osteoblast biocompatibility and functionality. In the case of the alkaline treatment, although the –OH radicals density did not increase compared to the as-sprayed coatings, a nanostructured layer of sodium hydroxycarbonate precipitated on the surface, thus improving biological behaviour due to the nanoroughness effect. For the collagen-treated samples, collagen fibrils appeared well-adhered to the surface, and in vitro cell culture tests showed that these surfaces were much more conducive to cell adhesion and differentiation than the as-sprayed and alkaline-treated samples. These results pointed to collagen treatment as a very promising method to improve bioactivity of HAp–TiO{sub 2} thermal-sprayed coatings.

  2. The evolution of Neoproterozoic magmatism in Southernmost Brazil: shoshonitic, high-K tholeiitic and silica-saturated, sodic alkaline volcanism in post-collisional basins

    Directory of Open Access Journals (Sweden)

    Sommer Carlos A.

    2006-01-01

    Full Text Available The Neoproterozoic shoshonitic and mildly alkaline bimodal volcanism of Southernmost Brazil is represented by rock assemblages associated to sedimentary successions, deposited in strike-slip basins formed at the post-collisional stages of the Brasilian/Pan-African orogenic cycle. The best-preserved volcano sedimentary associations occur in the Camaquã and Campo Alegre Basins, respectively in the Sul-riograndense and Catarinense Shields and are outside the main shear belts or overlying the unaffected basement areas. These basins are characterized by alternation of volcanic cycles and siliciclastic sedimentation developed dominantly on a continental setting under subaerial conditions. This volcanism and the coeval plutonism evolved from high-K tholeiitic and calc-alkaline to shoshonitic and ended with a silica-saturated sodic alkaline magmatism, and its evolution were developed during at least 60 Ma. The compositional variation and evolution of post-collisional magmatism in southern Brazil are interpreted as the result mainly of melting of a heterogeneous mantle source, which includes garnet-phlogopite-bearing peridotites, veined-peridotites with abundant hydrated phases, such as amphibole, apatite and phlogopite, and eventually with the addition of an asthenospheric component. The subduction-related metasomatic character of post-collisional magmatism mantle sources in southern Brazil is put in evidence by Nb-negative anomalies and isotope features typical of EM1 sources.

  3. A General Silica-Templating Synthesis of Alkaline Mesoporous Carbon Catalysts for Highly Efficient H2S Oxidation at Room Temperature.

    Science.gov (United States)

    Zhang, Zixiao; Jiang, Wuyou; Long, Donghui; Wang, Jitong; Qiao, Wenming; Ling, Licheng

    2017-01-25

    A general synthesis of alkaline mesoporous carbons (AMCs) is developed based on a simplified silica-templating method for room-temperature catalytic oxidation of H2S. The key to the success relies on dissolving the silica templates to create the interconnected mesoporous structure as well as leaving parts of the alkaline products in the pores; both of them are prerequisites for H2S oxidation. By adjusting the alkaline etching degree and organic/inorganic ratio, the porosity and basicity of the AMC could be simultaneously tuned, allowing the AMCs direct use for H2S catalytic oxidation with an unprecedented removal capacities of 4.49 ± 0.12 g/g. Such excellent catalytic performance should be attributed to the developed pore structure that stores the product sulfur and the strong basicity that promotes the dissociation of H2S into HS(-) ions. Moreover, this simplified silica-templating method could be easily extended to the preparation of various silica templated mesoporous carbon catalysts. All these AMCs demonstrate a successful combination of low cost with high performance, which may well be the answer for the technical development of industrial H2S removal.

  4. Stochastic modeling of filtrate alkalinity in water filtration devices: Transport through micro/nano porous clay based ceramic materials

    Science.gov (United States)

    Clay and plant materials such as wood are the raw materials used in manufacture of ceramic water filtration devices around the world. A step by step manufacturing procedure which includes initial mixing, molding and sintering is used. The manufactured ceramic filters have numerous pores which help i...

  5. Characterization of the Bacterial and Sulphate Reducing Community in the Alkaline and Constantly Cold Water of the Closed Kotalahti Mine

    Directory of Open Access Journals (Sweden)

    Malin Bomberg

    2015-07-01

    Full Text Available Drainage from metal-sulphide rich rocks may cause considerable environmental stress in the form of elevated sulphate and heavy metal contamination of the environment. Mine draining effects from closed mines may be abated using indigenous and introduced microbial communities for sulphate reduction and metal precipitation at the mining site. Here we characterized the general and sulphate reducing bacterial (SRB community of Kotalahti Mine (Finland. The mine was flooded after closure and sulphate reduction and metal precipitation was induced by addition of pig manure sludge into the Vehkankuilu shaft. Water was sampled from Vehkankuilu and Ollinkuilu shafts from depths −10, −30, −70 and −100 m 15 years after the treatment. The water in the shafts differed from each other biologically and geochemically. The shafts are not directly connected except by some fracture zones, and the Ollinkuilu shaft is used as a reference for environmental monitoring. The detected bacterial communities from both shafts contained methylotrophic γ-Proteobacteria, hydrogenotrophic and methylotrophic β-Proteobacteria and fermenting bacterial clades. The concentration of SRB was low, at most 4.0 × 103 dsrB genes·mL−1, and the SRB affiliated with Desulfobulbus and Thermoanaerobacteriales clades. Despite the obvious success of the mine as an in situ bioreactor for increasing water pH and removing sulphate and heavy metals by induced sulphate reduction under suboptimal temperature, only a small portion, less than 0.5%, of the bacterial population in the mine water was SRB.

  6. Coupling the Alkaline-Surfactant-Polymer Technology and The Gelation Technology to Maximize Oil Production

    Energy Technology Data Exchange (ETDEWEB)

    Malcolm Pitts; Jie Qi; Dan Wilson; Phil Dowling; David Stewart; Bill Jones

    2005-12-01

    Performance and produced polymer evaluation of four alkaline-surfactant-polymer projects concluded that only one of the projects could have benefited from combining the alkaline-surfactant-polymer and gelation technologies. Cambridge, the 1993 Daqing, Mellott Ranch, and the Wardlaw alkaline-surfacant-polymer floods were studied. An initial gel treatment followed by an alkaline-surfactant-polymer flood in the Wardlaw field would have been a benefit due to reduction of fracture flow. Numerical simulation demonstrated that reducing the permeability of a high permeability zone of a reservoir with gel improved both waterflood and alkaline-surfactant-polymer flood oil recovery. A Minnelusa reservoir with both A and B sand production was simulated. A and B sands are separated by a shale layer. A sand and B sand waterflood oil recovery was improved by 196,000 bbls or 3.3% OOIP when a gel was placed in the B sand. Alkaline-surfactant-polymer flood oil recovery improvement over a waterflood was 392,000 bbls or 6.5% OOIP. Placing a gel into the B sand prior to an alkaline-surfactant-polymer flood resulted in 989,000 bbl or 16.4% OOIP more oil than only water injection. A sand and B sand alkaline-surfactant-polymer flood oil recovery was improved by 596,000 bbls or 9.9% OOIP when a gel was placed in the B sand.

  7. Hard Water or High Ages?

    DEFF Research Database (Denmark)

    Philippsen, Bente

    2008-01-01

    to spurious, too high ages of samples from freshwater systems. The possibility of the hardwater effect in food crusts on pottery is investigated for two sites of the Late Mesolithic Ertebølle culture. The first radiocarbon dates from the food crusts from these sites were surprisingly high. I will examine...

  8. Alkaline hydrothermal zeolites synthesized from high SiO{sub 2} and Al{sub 2}O{sub 3} co-disposal fly ash filtrates

    Energy Technology Data Exchange (ETDEWEB)

    Vernon S. Somerset; Leslie F. Petrik; Richard A. White; Michael J. Klink; David Key; Emmanuel I. Iwuoha

    2005-12-01

    A co-disposal reaction was used wherein fly ash (FA) was reacted with acid mine drainage (AMD), to collect filtrates for zeolite synthesis. Raw fly ash as well as fly ash leached with HCl were subjected to the same alkaline hydrothermal zeolite synthesis conditions, as for the co-disposal filtrates, in order to evaluate the zeolitic material obtained. The Si and Al contents of the fly ash (FA) filtrates were used as precursor species for the alkaline hydrothermal conversion of the fly ash filtrates into zeolites. These filtrates were then analysed by XRF spectrometry for quantitative determination of SiO{sub 2} and Al{sub 2}O{sub 3}. The (SiO{sub 2})/(Al{sub 2}O{sub 3}) ratio obtained in the filtrates range from 1.4 to 2.5. The (SiO{sub 2})/(Al{sub 2}O{sub 3}) ratio was used to predict whether the fly ash filtrates could successfully be converted into faujasite zeolitic material by the adopted synthesis procedures. If the (SiO{sub 2})/(Al{sub 2}O{sub 3}) ratio is higher than 1.5 in the co-disposal filtrates, it favours the formation of faujasite. The zeolite synthesis included an alkaline fusion of the co-disposal filtrates, followed by aging for 8 hours and hydrothermal conversion by crystallisation at 100{sup o}C. Different variables were investigated during the synthesis of zeolite to ascertain their influence on the end product. These variables include adding different amounts of deionised water to the FA-related starting material, using different compositions of FA related starting material and different FA:NaOH ratios in fusing the starting material. 15 refs., 3 figs., 2 tabs.

  9. High performance nano-Ni/Graphite electrode for electro-oxidation in direct alkaline ethanol fuel cells

    Science.gov (United States)

    Soliman, Ahmed B.; Abdel-Samad, Hesham S.; Abdel Rehim, Sayed S.; Ahmed, Mohamed A.; Hassan, Hamdy H.

    2016-09-01

    Ni/Graphite electrocatalysts (Ni/G) are successfully prepared through electrodeposition of Ni from acidic (pH = 0.8) and feebly acidic (pH = 5.5) aqueous Ni (II) baths. The efficiencies of such electrodes are investigated as anodes for direct alkaline ethanol fuel cells through their ethanol electrooxidation cyclic voltammetric (CV) response in alkaline medium. A direct proportionality between the amount of the electrodeposited Ni and its CV response is found. The amounts of the deposited Ni from the two baths are recorded using the Electrochemical Quartz Crystal Microbalance (eQCM). The Ni/G electrodes prepared from the feebly acidic bath show a higher electrocatalytic response than those prepared from the acidic bath. Surface morphology of the Ni particles electrodeposited from feebly acidic bath appears in a nano-scale dimension. Various electrochemical experiments are conducted to confirm that the Ni/G ethanol electrooxidation CV response greatly depends on the pH rather than nickel ion concentration of the deposition bath. The eQCM technique is used to detect the crystalline phases of nickel as α-Ni(OH)2/γ-NiOOH and β-Ni(OH)2/β-NiOOH and their in-situ inter-transformations during the potentiodynamic polarization.

  10. Hard Water or High Ages?

    DEFF Research Database (Denmark)

    Philippsen, Bente

    2008-01-01

    The aim of this thesis is the investigation of the hardwater effect and its implications for the dating of the first occurrence of pottery in Northern Germany. The hardwater effect denotes the effect of a high carbonate content of freshwater on radiocarbon dating: the dissolved minerals can lead...

  11. Effects of Myriophyllum spicatum on Kinetic Characteristics of Alkaline Phosphatase in Water and Sediments%狐尾藻对水体和沉积物中碱性磷酸酶动力学特征的影响

    Institute of Scientific and Technical Information of China (English)

    赵海超; 王圣瑞; 金相灿; 焦立新

    2011-01-01

    The enzyme mechanism of an inactivating eutrophic lake by submerged plants was determined by analyzing the kinetic parameter variations of alkaline phosphataae in the overlying water, interstitial water and sediments under indoor simulating conditions with the plant Myriophyllum spicatum. The results indicated that under the experimental condition Vmax of the alkaline phosphatase, the overlying water, the interstitial water and the sediments were all reduced by planting Myriophyllum spicatum. Myriophyllum spicatum inactivated the alkaline phosphatase in the overlying water and sediments obviously, and mainly inactivated the dissolved alkaline phosphatase Vmax in the interstitial water. The effect of Myriophyllum spicatum on alkaline phosphatase in the soil was higher than that in the sediment of same nutrition. The Vmax and Km of the alkaline phosphatase in the overlying water of the soil substrate were higher than those of the sediment substrate, and the Vmax and Km of the alkaline phosphatase in the soil were lower than those in the sediment. The Vmax of the alkaline phosphatase in the sediments ascended opposite to that in the overlying water. The alkaline phosphatase in the interstitial water had obvious seasonal variation and characteristics, and Vmax attained the highest value from July to August.%在室内模拟条件下栽培狐尾藻,通过对上覆水、间隙水和沉积物中碱性磷酸酶动力学参数变化的分析,揭示了沉水植物对湖泊富营养化影响的酶学机制.结果表明:在试验条件下,栽培狐尾藻使上覆水、间隙水和沉积物中的碱性磷酸酶的最大反应速率(Vmax)均有所降低;狐尾藻对上覆水和底质中碱性磷酸酶反应速率及亲和力的抑制作用比较明显,对间隙水主要是抑制溶解性碱性磷酸酶的Vmax;狐尾藻对土壤中碱性磷酸酶的影响比同一营养水平的沉积物大,与沉积物相比,土壤作底质时上覆水中碱性磷酸酶的Vmax和K(ms)(米氏

  12. High Impedance Comparator for Monitoring Water Resistivity.

    Science.gov (United States)

    Holewinski, Paul K.

    1984-01-01

    A high-impedance comparator suitable for monitoring the resistivity of a deionized or distilled water line supplying water in the 50 Kohm/cm-2 Mohm/cm range is described. Includes information on required circuits (with diagrams), sensor probe assembly, and calibration techniques. (JN)

  13. Static and Dynamic Structure Factors with Account of the Ion Structure for High-temperature Alkali and Alkaline Earth Plasmas

    CERN Document Server

    Sadykova, S P; Tkachenko, I M

    2010-01-01

    The $e-e$, $e-i$, $i-i$ and charge-charge static structure factors are calculated for alkali and Be$^{2+}$ plasmas using the method described by Gregori et al. in \\cite{bibGreg2006}. The dynamic structure factors for alkali plasmas are calculated using the method of moments \\cite{bibAdam83}, \\cite{bibAdam93}. In both methods the screened Hellmann-Gurskii-Krasko potential, obtained on the basis of Bogolyubov's method, has been used taking into account not only the quantum-mechanical effects but also the ion structure \\cite{bib73}. PACS: 52.27.Aj (Alkali and alkaline earth plasmas, Static and dynamic structure factors), 52.25.Kn (Thermodynamics of plasmas), 52.38.Ph (X-ray scattering)

  14. Alkaline fuel cells applications

    Science.gov (United States)

    Kordesch, Karl; Hacker, Viktor; Gsellmann, Josef; Cifrain, Martin; Faleschini, Gottfried; Enzinger, Peter; Fankhauser, Robert; Ortner, Markus; Muhr, Michael; Aronson, Robert R.

    On the world-wide automobile market technical developments are increasingly determined by the dramatic restriction on emissions as well as the regimentation of fuel consumption by legislation. Therefore there is an increasing chance of a completely new technology breakthrough if it offers new opportunities, meeting the requirements of resource preservation and emission restrictions. Fuel cell technology offers the possibility to excel in today's motive power techniques in terms of environmental compatibility, consumer's profit, costs of maintenance and efficiency. The key question is economy. This will be decided by the costs of fuel cell systems if they are to be used as power generators for future electric vehicles. The alkaline hydrogen-air fuel cell system with circulating KOH electrolyte and low-cost catalysed carbon electrodes could be a promising alternative. Based on the experiences of Kordesch [K. Kordesch, Brennstoffbatterien, Springer, Wien, 1984, ISBN 3-387-81819-7; K. Kordesch, City car with H 2-air fuel cell and lead-battery, SAE Paper No. 719015, 6th IECEC, 1971], who operated a city car hybrid vehicle on public roads for 3 years in the early 1970s, improved air electrodes plus new variations of the bipolar stack assembly developed in Graz are investigated. Primary fuel choice will be a major issue until such time as cost-effective, on-board hydrogen storage is developed. Ammonia is an interesting option. The whole system, ammonia dissociator plus alkaline fuel cell (AFC), is characterised by a simple design and high efficiency.

  15. Preparation of Reducing Sugar Hydrolyzed from High-Lignin Coconut Coir Dust Pretreated by the Recycled Ionic Liquid [mmim][dmp] and Combination with Alkaline

    Directory of Open Access Journals (Sweden)

    Hanny Frans Sangian

    2015-03-01

    Full Text Available This study aims to produce reducing sugar hydrolyzed from substrate, coconut coir dust pretreated by recycled ionic liquid and its combination with alkaline. The 1H NMR and FTIR were performed to ver-ify the synthesized ionic liquid methylmethylimidazolium dimethyl phosphate ([mmim][dmp]. The structure of pretreated substrates was analyzed by XRD measurement. The used ionic liquid was recy-cled twice to re-employ for substrate pretreatment. The treated- and untreated-coconut coir dust were hydrolyzed into sugars using pure cellulase. The reaction, which called an enzymatic hydrolysis, was conducted at 60 °C, pH 3, for 48 h. The yields of sugar hydrolyzed from fresh IL-pretreated, 1R*IL-pretreated and 2R*IL-pretreated substrates were of 0.19, 0.15 and 0.15 g sugar / g cellu-lose+hemicellulose, respectively. Pretreatment with NaOH or the combination of NaOH+IL resulted in yields of reducing sugars of 0.25, 0.28 g/g, respectively. When alkaline combined with the recycled ionic liquids, NaOH+1R*IL, NaOH+2R*IL in the pretreatment, the yields of sugar were relatively similar to those obtained using alkaline followed by fresh ionic liquid. If the mixture enzymes, cellu-lase+xylanase, used to liberate sugars from fresh IL-pretreated, or recycled IL-pretreated substrates, the amount of sugar (concentration or yield increased slightly compared to that employing a single cel-lulase. These findings showed that recycled IL pretreatment of the high-lignin lignocellulose, coconut coir dust, is a new prospect for the economical manufacture of fermentable sugars and biofuel in the coming years. © 2015 BCREC UNDIP. All rights reservedReceived: 1st July 2014; Revised: 5th September 2014; Accepted: 5th September 2014 How to Cite: Sangian, H.F., Kristian, J., Rahma, S., Dewi, H., Puspasari, D., Agnesty, S., Gunawan, S., Widjaja, A. (2015. Preparation of Reducing Sugar Hydrolyzed from High-Lignin Coconut Coir Dust Pretreated by the Recycled Ionic Liquid [mmim

  16. An alkaline element

    Energy Technology Data Exchange (ETDEWEB)

    Arita, T.; Murakami, K.; Okha, K.

    1983-04-28

    A cathode with a dual layer active mass is installed in the disk shaped alkaline silver and zinc element. The first layer, which is turned towards the anode, contains 85 parts Ag2O, 5 parts electrolytic MnO2 and 10 parts graphite. The second layer, which contacts the bottom of the element, contains 35 parts Ag2O, 60 parts electrolytic MnO2 and 5 parts graphite. The electrical capacity of the first and second layers is 60 and 40, respectively. The first layer may be discharged with a high current density and the second layer with less current density. The element has high characteristics with comparatively low cost.

  17. Practical determination of alkalinity in waters and usefulness of the saturation-equilibrium indexes; Determinacion practica de la alcalinidad de un agua y utilidad de los indices de sturacion y equilibrio

    Energy Technology Data Exchange (ETDEWEB)

    Marin Galvin, R.; Rodriguez Mellado, J. M. [Universidad de Rabanales. Cordoba (Spain)

    2000-07-01

    A practical study related to the carbonic equilibrium has been carried out over 24 natural and treated waters. In this way, carbonic equilibrium is undoubtedly essential to lead the physicochemical behaviour of aquatic systems. Experimental results demonstrate that alkalinity analysis by Gran's titulation yield values 75% lower than those obtained by alkalimetric titulation (AT). Nevertheless, determination of the end valoration point is more objective with Gran's than with alkalimetric titulation. Thus, Gran's could be a better technique to measure alkalinity values lower than 200 mg/l of HCO3-and TAC for higher values. On the other way, the calculated values of equilibrium pH (pHE) and Langelier's and Ryznar's indexes (iL and iR) inform qualitatively about the carbonic behaviour in the 60% of studied waters. Moreover, the time of 48 hours applied in the calcite assay must be increased up to around 7 days to yield results more consistent according to the practical carbonic behaviour of waters. Finally, it is necessary to carry out deeper studies about alkalinity of waters to obtain sounder conclusions. (Author) 7 refs.

  18. High conversion of sugarcane bagasse into monosaccharides based on sodium hydroxide pretreatment at low water consumption and wastewater generation.

    Science.gov (United States)

    Wang, Wen; Wang, Qiong; Tan, Xuesong; Qi, Wei; Yu, Qiang; Zhou, Guixiong; Zhuang, Xinshu; Yuan, Zhenhong

    2016-10-01

    The generation of a great quantity of black liquor (BL) and waste wash water (WWW) has been key problems of the alkaline pretreatment. This work tried to build a sustainable way to recycle the BL for pretreating sugarcane bagasse (SCB) and the WWW for washing the residual solid (RS) of alkali-treated SCB which would be subsequently hydrolysed and fermented. The enzymatic hydrolysis efficiency of the washed RS decreased with the recycling times of BL and WWW increasing. Tween80 at the loading of 0.25% (V/V) could notably improve the enzymatic hydrolysis and had no negative impact on the downstream fermentation. Compared with the non-recycling and BL recycling ways based on alkaline pretreatment, the BL-WWW recycling way could not only maintain high conversion of carbohydrate into monosaccharides and save alkali amount of 45.5%, but also save more than 80% water and generate less than 15% waste water.

  19. Solar light (hv) and H2O2/hv photo-disinfection of natural alkaline water (pH 8.6) in a compound parabolic collector at different day periods in Sahelian region

    OpenAIRE

    Ndounla, J.; Pulgarin, C

    2015-01-01

    The photo-disinfection of natural alkaline surface water (pH 8.6 +/- 0.3) for drinking purposes was carried out under solar radiation treatments. The enteric bacteria studied were the wild total coliforms/Escherichia coli (10(4) CFU/ml) and Salmonella spp. (10(4) CFU/ml) naturally present in the water. The photo-disinfection of a 25-l water sample was carried out in a solar compound parabolic collector (CPC) in the absence and in the presence of hydrogen peroxide (H2O2). The addition of H2O2 ...

  20. Molybdenum Carbide Nanoparticles on Carbon Nanotubes and Carbon Xerogel: Low-Cost Cathodes for Hydrogen Production by Alkaline Water Electrolysis.

    Science.gov (United States)

    Šljukić, Biljana; Santos, Diogo M F; Vujković, Milica; Amaral, Luís; Rocha, Raquel P; Sequeira, César A C; Figueiredo, José L

    2016-05-23

    Low-cost molybdenum carbide (Mo2 C) nanoparticles supported on carbon nanotubes (CNTs) and on carbon xerogel (CXG) were prepared and their activity for the hydrogen evolution reaction (HER) was evaluated in 8 m KOH aqueous electrolyte at 25-85 °C. Measurements of the HER by linear scan voltammetry allowed us to determine Tafel slopes of 71 and 74 mV dec(-1) at 25 °C for Mo2 C/CNT and Mo2 C/CXG, respectively. Stability tests were also performed, which showed the steady performance of the two electrocatalysts. Moreover, the HER kinetics at Mo2 C/CNT was enhanced significantly after the long-term stability tests. The specific activity of both materials was high, and a higher stability was obtained for the activated Mo2 C/CNT (40 A g(-1) at -0.40 V vs. the reversible hydrogen electrode).

  1. Comparative Study of the Preparation of Reducing Sugars Hydrolyzed from High-Lignin Lignocellulose Pretreated with Ionic Liquid, Alkaline Solution and Their Combination

    Directory of Open Access Journals (Sweden)

    Hanny F. Sangian

    2015-05-01

    Full Text Available The ionicliquid [MMIM][DMP] was synthesized from the reactants methyl imidazole [MIM] and trimethylphosphate [TMP] and verified using 1HNMR and FTIR. Coconut coir dust was pretreated with a 1% alkaline solution.Its crystalline structure increased significantly due to the dissolution of lignin and hemicelluloses under alkaline conditions, exposing the cellulose. After NaOH and IL were employed, the XRD showed that peak (002 decreased significantly and peak (101 almost vanished. This significant decrease in crystallinity was related to the alteration of the substrate from the cellulose I structure to the cellulose II structure. The pretreated substrates were hydrolyzed to convert them to reducing sugars by pure cellulase and xylanase,and the reaction was conducted at 60°C, pH 3, for 12 or 48 hours. The yields of sugar hydrolyzed from untreated and NaOH-pretreated substrates were 0.07 and 0.12 g sugar/g lignocellulose, respectively. Pretreatment with IL or the combination of NaOH+IL resulted in yields of reducing sugars of 0.11 and 0.13 g/g, respectively. These findings showed that IL pretreatment of the high-lignin lignocellulose is a new prospect for the economical manufacture of reducing sugars and bioethanol in the coming years.

  2. 碱性电解水析氢电极的研究进展%Research progress in hydrogen electrode materials for alkaline water electrolysis

    Institute of Scientific and Technical Information of China (English)

    张开悦; 刘伟华; 陈晖; 张博; 刘建国; 严川伟

    2015-01-01

    电解水制氢将成为未来绿色制氢工业的核心技术。研究新型阴极材料以有效降低阴极过电位,对降低电解水能耗和设备成本、提高生产稳定性和安全性,具有十分重要的现实意义。本文主要对碱性水溶液电解制氢工业的析氢阴极材料进行综述。围绕电极结晶结构设计和尺寸结构设计两个主要的电极发展方向,重点介绍了3类基于电沉积制备技术的Ni基电极材料:合金析氢电极、复合析氢电极、多孔析氢电极。分析了当前析氢电极在实验研发与工业应用中存在的问题。指出采用电沉积法,制备催化活性更高且适用于工业电解环境的多元复合电极材料将是今后析氢电极发展的趋势。%Water electrolysis will become the core technology of environmental production for hydrogen industry in the future. It is very important to study new cathode materials for reducing the cathode overpotential. Because it not only can reduce energy consumption and the cost of water electrolysis,but also can enhance the stability and safety of production. This paper mainly discusses the research status of hydrogen electrode materials for alkaline water electrolysis. Based on the major improvement of catalytic activity for hydrogen evolution reaction,this paper mainly focuses on the electrodepositing preparation method for three kinds of nickel-based electrodes,which are alloy hydrogen evolution electrode,composite hydrogen evolution electrode,and porous hydrogen evolution electrode. The existing problems on hydrogen evolution electrode in experimental research and industrial application are analyzed. In the end,it is pointed out that the more catalytic activity and more stable electrochemical performance of multivariate composite electrodes based on electrodepositing preparation will be the future of hydrogen electrode development.

  3. Combinatorial strategy of sorbitol feeding and low-temperature induction leads to high-level production of alkaline β-mannanase in Pichia pastoris.

    Science.gov (United States)

    Zhu, Taicheng; You, Lijin; Gong, Fuyu; Xie, Minfeng; Xue, Yanfen; Li, Yin; Ma, Yanhe

    2011-09-10

    A process for efficient production of an alkaline β-mannanases from Bacillus sp. N16-5 was established by heterologous expression using Pichia pastoris. A high producing strain was generated by removing the native β-mannanases signal peptide and increasing the copy number of the mature β-mannanases gene. High cell density fermentation of this strain in 1-L bioreactor led to a production level of 4164 U/mL after 96 h of induction. Sorbitol co-feeding and temperature-lowering strategies both increased the β-mannanase production levels. Combined usage of these two strategies achieved the most effective result-the enzyme level reached 6336 U/mL within 84 h, which to our best knowledge is the highest production level reported for the expression of extreme β-mannanase thus far. The strategy described in this work can also be adapted to express other important industrial enzymes with extreme properties.

  4. [Fundamental study on effect of high-mineral drinking water for osteogenesis in calciprivia ovariectomized rats].

    Science.gov (United States)

    Ogata, Fumihiko; Nagai, Noriaki; Ito, Yoshimasa; Kawasaki, Naohito

    2014-01-01

    Since osteoporosis is a major public health problem in Japan, it is important to clarify the effect of high-mineral drinking water consumption on osteogenesis. Therefore, in this study, we investigated the relationship between high-mineral drinking water consumption and osteogenesis in ovariectomized rats that received a low-calcium diet and purified water (PW group) or a low-calcium diet and high-mineral drinking water (CR group). High-mineral drinking water affected the rats' body weight. After 3 months, the bone density of the CR group was higher than that of the PW group (pmineral drinking water contributes to the maintenance of bone density and not to the amount of calcium in bone. On the other hand, serum alkaline phosphatase levels in the PW group at 3 months were higher than those in the CR group, which indicates that the blood concentration of calcium in the CR group was maintained. Moreover, the amount of magnesium in the bones and the blood concentration of magnesium in the CR group after 3 months were higher than the corresponding values in the PW group. These results suggest that consumption of high-mineral drinking water could be beneficial for osteogenesis (i.e., for maintaining bone quantity).

  5. Anodes for alkaline electrolysis

    Science.gov (United States)

    Soloveichik, Grigorii Lev

    2011-02-01

    A method of making an anode for alkaline electrolysis cells includes adsorption of precursor material on a carbonaceous material, conversion of the precursor material to hydroxide form and conversion of precursor material from hydroxide form to oxy-hydroxide form within the alkaline electrolysis cell.

  6. Displacement mechanisms of enhanced heavy oil recovery by alkaline flooding in a micromodel

    Institute of Scientific and Technical Information of China (English)

    Mingzhe Dong; Qiang Liu; Aifen Li

    2012-01-01

    Enhanced oil recovery (EOR) by alkaline flooding for conventional oils has been extensively studied.For heavy oils,investigations are very limited due to the unfavorable mobility ratio between the water and oil phases.In this study,the displacement mechanisms of alkaline flooding for heavy oil EOR are investigated by conducting flood tests in a micromodel.Two different displacement mechanisms are observed for enhancing heavy oil recovery.One is in situ water-in-oil (W/O) emulsion formation and partial wettability alteration.The W/O emulsion formed during the injection of alkaline solution plugs high permeability water channels,and pore walls are altered to become partially oil-wetted,leading to an improvement in sweep efficiency and high tertiary oil recovery.The other mechanism is the formation of an oil-in-water (O/W) emulsion.Heavy oil is dispersed into the water phase by injecting an alkaline solution containing a very dilute surfactant.The oil is then entrained in the water phase and flows out of the model with the water phase.

  7. High pressure water jet cutting and stripping

    Science.gov (United States)

    Hoppe, David T.; Babai, Majid K.

    1991-01-01

    High pressure water cutting techniques have a wide range of applications to the American space effort. Hydroblasting techniques are commonly used during the refurbishment of the reusable solid rocket motors. The process can be controlled to strip a thermal protective ablator without incurring any damage to the painted surface underneath by using a variation of possible parameters. Hydroblasting is a technique which is easily automated. Automation removes personnel from the hostile environment of the high pressure water. Computer controlled robots can perform the same task in a fraction of the time that would be required by manual operation.

  8. Alkaline resistant ceramics; Alkalimotstaandskraftiga keramer

    Energy Technology Data Exchange (ETDEWEB)

    Westberg, Stig-Bjoern [Vattenfall Utveckling AB, Aelvkarleby (Sweden)

    2001-02-01

    Despite durability in several environments, ceramics and refractories can not endure alkaline environments at high temperature. An example of such an environment is when burning biofuel in modern heat and power plants in which the demand for increasing efficiency results in higher combustion temperatures and content of alkaline substances in the flue gas. Some experiences of these environments has been gained from such vastly different equipment as regenerator chambers in the glass industry and MHD-generators. The grains of a ceramic material are usually bonded together by a glassy phase which despite it frequently being a minor constituent render the materials properties and limits its use at elevated temperature. The damage is usually caused by alkaline containing low-melting phases and the decrease of the viscosity of the bonding glass phase which is caused by the alkaline. The surfaces which are exposed to the flue gas in a modern power plant are not only exposed to the high temperature but also a corroding and eroding, particle containing, gas flow of high velocity. The use of conventional refractory products is limited to 1300-1350 deg C. Higher strength and fracture toughness as well as durability against gases, slag and melts at temperatures exceeding 1700 deg C are expected of the materials of the future. Continuous transport of corrosive compounds to the surface and corrosion products from the surface as well as a suitable environment for the corrosion to occur in are prerequisites for extensive corrosion to come about. The highest corrosion rate is therefore found in a temperature interval between the dew point and the melting point of the alkaline-constituent containing compound. It is therefore important that the corrosion resistance is sufficient in the environment in which alkaline containing melts or slag may appear. In environments such as these, even under normal circumstances durable ceramics, such as alumina and silicon carbide, are attacked

  9. Hydrophobic aggregation of fine particles in high muddied coal slurry water.

    Science.gov (United States)

    Chen, Jun; Min, Fanfei; Liu, Lingyun; Peng, Chenliang; Lu, Fangqin

    2016-01-01

    The hydrophobic aggregation of fine particles in high muddied coal slurry water in the presence of four quaternary ammonium salts of 1231(dodecyl trimethyl ammonium chloride), 1431(tetradecyl trimethyl ammonium chloride), 1631(cetyl trimethyl ammonium chloride) and 1831(octadecyl trimethyl ammonium chloride) was investigated through the measurement of contact angles, zeta potentials, aggregation observation, adsorption and sedimentation. The results show that quaternary ammonium salts can enhance the hydrophobicity and reduce the electronegativity of particle surface, and thus induce a strong hydrophobic aggregation of slurry fine particles which promotes the settlement of coal slurry water. The adsorption of quaternary ammonium salts on slurry particles increases with the increase of alkyl chain length and reagent dosage, and will reach equilibrium when the dosage reaches a certain value. Weak alkaline conditions also can promote quaternary ammonium salts to be adsorbed on the coal slurry fine particles. In addition, reasonable energy input and a chemical environment of weak alkaline solution are conducive to hydrophobic aggregation settlement of high muddied coal slurry water with quaternary ammonium salts. The main mechanism of hydrophobic aggregation of coal slurry particles with quaternary ammonium salts is 'adsorption charge neutralization' and hydrophobic interaction.

  10. Petrogenesis and its significance to continental dynamics of the Neogene high-potassium calc-alkaline volcanic rock association from north Qiangtang, Tibetan Plateau

    Institute of Scientific and Technical Information of China (English)

    赖绍聪; 刘池阳; S.Y.O’Reilly

    2001-01-01

    Detailed studies indicate that the main rock type of the Neogene high-potassium calc-alkaline volcanic rock association from north Qiangtang is andesite, dacite and rhyolite. They belong to typical crust-generation magmatic system and originate from the special thickened crust of the Tibetan Plateau by dehydration melting. This group of rocks exhibits LREE enrichment but no remarkable Eu anomaly that shows their source region should be a thickened deep crust consisting of eclogitic mass group, implying that the crust had been thickened and an eclogitic deep crust had been formed during the Neogene period in Qiangtang area. This understanding is important and significant to making further discussion on the uplift mechanism and continental dynamics of the Tibetan Plateau.

  11. Aquatic macrophyte richness in Danish lakes in relation to alkalinity, transparency, and lake area

    DEFF Research Database (Denmark)

    Vestergaard, Ole Skafte; Sand-Jensen, Kaj

    2000-01-01

    alkalinity but 12.3 in lakes of high alkalinity due to a greater occurrence of the species-rich group of elodeids. Mean species richness per lake also increased significantly with increasing Secchi depth. No significant relationship between species richness and lake surface area was observed among the entire...... group of lakes or a subset of eutrophic lakes, as the growth of submerged macrophytes in large lakes may be restricted by wave action in shallow water and light restriction in deep water. In contrast, macrophyte species richness increased with lake surface area in transparent lakes, presumably due...

  12. High-resolution seismic profiling on water

    OpenAIRE

    McGee, T.M.

    2000-01-01

    Herein is presented an overview of high-resolution seismic profiling on water. Included are basic concepts and terminology as well as discussions of types of sources and receivers, field practice, data recording and data processing. Emphasis is on digital single-channel profiling for engineering and environmental purposes.

  13. Alkaline battery operational methodology

    Science.gov (United States)

    Sholklapper, Tal; Gallaway, Joshua; Steingart, Daniel; Ingale, Nilesh; Nyce, Michael

    2016-08-16

    Methods of using specific operational charge and discharge parameters to extend the life of alkaline batteries are disclosed. The methods can be used with any commercial primary or secondary alkaline battery, as well as with newer alkaline battery designs, including batteries with flowing electrolyte. The methods include cycling batteries within a narrow operating voltage window, with minimum and maximum cut-off voltages that are set based on battery characteristics and environmental conditions. The narrow voltage window decreases available capacity but allows the batteries to be cycled for hundreds or thousands of times.

  14. HAWC - The High Altitude Water Cherenkov Detector

    Science.gov (United States)

    Tepe, Andreas; HAWC Collaboration

    2012-07-01

    The high altitude water Cherenkov observatory (HAWC) is an instrument for the detection of high energy cosmic gamma-rays. Its predecessor Milagro has successfully proven that the water Cherenkov technology for gamma-ray astronomy is a useful technique. HAWC is currently under construction at Sierra Negra in Mexico at an altitude of 4100 m and will include several improvements compared to Milagro. Two complementary DAQ systems of the HAWC detector allow for the observation of a large fraction of the sky with a very high duty cycle and independent of environmental conditions. HAWC will observe the gamma-ray sky from about 100 GeV up to 100 TeV. Also the cosmic ray flux anisotropy on different angular length scales is object of HAWC science. Because of HAWC's large effective area and field of view, we describe its prospects to observe gamma-ray bursts (GRBs) as an example for transient sources.

  15. A possibility of a protein-bound water molecule as the ionizable group responsible for pKe at the alkaline side in human matrix metalloproteinase 7 activity.

    Science.gov (United States)

    Morishima, Aiko; Yasukawa, Kiyoshi; Inouye, Kuniyo

    2012-05-01

    Human matrix metalloproteinase 7 (MMP-7) activity exhibits broad bell-shaped pH profile with the acidic and alkaline pK(a) (pK(e1) and pK(e2)) values of about 4 and 10. The ionizable group for pK(e2) was assigned to Lys or Arg by thermodynamic analysis; however, no such residues are present in the active site. Hence, based on the crystal structure, we hypothesized that a water molecule bound to the main-chain nitrogen of Ala162 (W1) or the main-chain carbonyl oxygen of Pro217 (W2) is a candidate for the ionizable group for pK(e2) [Takeharu, H. et al. (2011) Biochim. Biophys. Acta 1814, 1940-1946]. In this study, we inspected this hypothesis. In the hydrolysis of (7-methoxycoumarin-4-yl)acetyl-L-Pro-L-Leu-Gly-L-Leu-[N(3)-(2,4-dinitrophenyl)-L-2,3-diaminopropionyl]-L-Ala-L-Arg-NH(2), all 19 variants, in which one of all Lys and Arg residues was replaced by Ala, retained activity, indicating that neither Lys nor Arg is the ionizable group. pK(e2) values of A162S, A162V and A162G were 9.6 ± 0.1, 9.5 ± 0.1 and 10.4 ± 0.2, respectively, different from that of wild-type MMP-7 (WT) (9.9 ± 0.1) by 0.3-0.5 pH unit, and those of P217S, P217V and P217G were 10.1 ± 0.1, 9.8 ± 0.1 and 9.7 ± 0.1, respectively, different from that of WT by 0.1-0.2 pH unit. These results suggest a possibility of W1 or W2 as the ionizable group for pK(e2).

  16. Uranium in alkaline rocks

    Energy Technology Data Exchange (ETDEWEB)

    Murphy, M.; Wollenberg, H.; Strisower, B.; Bowman, H.; Flexser, S.; Carmichael, I.

    1978-04-01

    Geologic and geochemical criteria were developed for the occurrence of economic uranium deposits in alkaline igneous rocks. A literature search, a limited chemical analytical program, and visits to three prominent alkaline-rock localities (Ilimaussaq, Greenland; Pocos de Caldas, Brazil; and Powderhorn, Colorado) were made to establish criteria to determine if a site had some uranium resource potential. From the literature, four alkaline-intrusive occurrences of differing character were identified as type-localities for uranium mineralization, and the important aspects of these localities were described. These characteristics were used to categorize and evaluate U.S. occurrences. The literature search disclosed 69 U.S. sites, encompassing nepheline syenite, alkaline granite, and carbonatite. It was possible to compare two-thirds of these sites to the type localities. A ranking system identified ten of the sites as most likely to have uranium resource potential.

  17. LCMS-QTOF Determination of Lentinan-Like β-D-Glucan Content Isolated by Hot Water and Alkaline Solution from Tiger’s Milk Mushroom, Termite Mushroom, and Selected Local Market Mushrooms

    Directory of Open Access Journals (Sweden)

    Nor Azreen Mohd Jamil

    2013-01-01

    Full Text Available Lentinan, 1152 Dalton β-D-glucan found in Shiitake Mushroom (Lentinus edodes, has been claimed to have anticancer and immunomodulatory activity. Several extraction methods have been used by researchers to isolate Lentinan including hot water and alkaline solution (1.25 M NaOH. In this study, hot water and alkaline solution (1.25 M NaOH were used to extract the Lentinan-like β-D-glucan (1151 Dalton from Tiger’s Milk Mushroom, Termite Mushroom, and selected local market mushrooms. The isolated Lentinan-like β-D-glucan from both hot water and alkaline solution was analyzed by LCMS-QTOF. Commercial Lentinan standard from Lentinus edodes was used as a reference. The results showed significant differences on chromatogram patterns of Lentinan-like β-D-glucan between both extracts. The peak of Lentinan-like β-D-glucan was only found in isolated polysaccharide glucan of hot water extracts. The isolated polysaccharide glucans from Tiger’s Milk Mushroom and Termite Mushroom were found to have 0.74±0.12 μg/mg and 0.53±0.07 μg/mg Lentinan-like β-D-glucan. Button Mushroom, Shiitake Mushroom, and Oyster Mushroom showed the presence of Lentinan-like β-D-glucan at 16.16±4.15 μg/mg, 0.22±0.04, and 0.10±0.01 μg/mg, respectively.

  18. A study of photosynthetic biogas upgrading based on a high rate algal pond under alkaline conditions: Influence of the illumination regime.

    Science.gov (United States)

    Franco-Morgado, Mariana; Alcántara, Cynthia; Noyola, Adalberto; Muñoz, Raúl; González-Sánchez, Armando

    2017-08-15

    Microalgal-bacterial processes have emerged as environmental friendly systems for the cost-effective treatment of anaerobic effluents such as biogas and nutrients-laden digestates. Environmental parameters such as temperature, irradiation, nutrient concentration and pH effect the performance of the systems. In this paper, the potential of a microalgal-bacterial photobioreactor operated under high pH (≈9.5) and high alkalinity to convert biogas into biomethane was evaluated. The influence of the illumination regime (continuous light supply vs 12h/12h light/dark cycles) on the synthetic biogas upgrading efficiency, biomass productivity and nutrient removal efficiency was assessed in a High-Rate Algal Pond interconnected to a biogas absorption bubble column. No significant differences in the removal efficiency of CO2 and H2S (91.5±2% and 99.5%±0.5, respectively) were recorded regardless of the illumination regime. The high fluctuations of the dissolved oxygen concentration during operation under light/dark cycles allowed to evaluate the specific growth rate and the specific partial degradation rate of the microalgae biomass by photosynthesis and respiration, respectively. The respiration reduced the net microalgae biomass productivity under light/dark cycles compared with process operation under the continuous light supply. Copyright © 2017 Elsevier B.V. All rights reserved.

  19. A highly thermostable alkaline cellulase-free xylanase from thermoalkalophilic Bacillus sp. JB 99 suitable for paper and pulp industry: purification and characterization.

    Science.gov (United States)

    Shrinivas, Dengeti; Savitha, Gunashekaran; Raviranjan, Kumar; Naik, Gajanan Ramchandra

    2010-11-01

    A highly thermostable alkaline xylanase was purified to homogeneity from culture supernatant of Bacillus sp. JB 99 using DEAE-Sepharose and Sephadex G-100 gel filtration with 25.7-fold increase in activity and 43.5% recovery. The molecular weight of the purified xylanase was found to be 20 kDA by SDS-PAGE and zymogram analysis. The enzyme was optimally active at 70 °C, pH 8.0 and stable over pH range of 6.0-10.0.The relative activity at 9.0 and 10.0 were 90% and 85% of that of pH 8.0, respectively. The enzyme showed high thermal stability at 60 °C with 95% of its activity after 5 h. The K (m) and V (max) of enzyme for oat spelt xylan were 4.8 mg/ml and 218.6 µM min(-1) mg(-1), respectively. Analysis of N-terminal amino acid sequence revealed that the xylanase belongs to glycosyl hydrolase family 11 from thermoalkalophilic Bacillus sp. with basic pI. Substrate specificity showed a high activity on xylan-containing substrate and cellulase-free nature. The hydrolyzed product pattern of oat spelt xylan on thin-layer chromatography suggested xylanase as an endoxylanase. Due to these properties, xylanase from Bacillus sp. JB 99 was found to be highly compatible for paper and pulp industry.

  20. Energetics of Amino Acid Synthesis in Alkaline Hydrothermal Environments

    Science.gov (United States)

    Kitadai, Norio

    2015-12-01

    Alkaline hydrothermal systems have received considerable attention as candidates for the origin and evolution of life on the primitive Earth. Nevertheless, sufficient information has not yet been obtained for the thermodynamic properties of amino acids, which are necessary components for life, at high temperatures and alkaline pH. These properties were estimated using experimental high-temperature volume and heat capacity data reported in the literature for several amino acids, together with correlation algorithms and the revised Helgeson-Kirkham-Flowers (HKF) equations of state. This approach enabled determination of a complete set of the standard molal thermodynamic data and the revised HKF parameters for the 20 protein amino acids in their zwitterionic and ionization states. The obtained dataset was then used to evaluate the energetics of amino acid syntheses from simple inorganic precursors (CO2, H2, NH3 and H2S) in a simulated alkaline hydrothermal system on the Hadean Earth. Results show that mixing between CO2-rich seawater and the H2-rich hydrothermal fluid can produce energetically favorable conditions for amino acid syntheses, particularly in the lower-temperature region of such systems. Together with data related to the pH and temperature dependences of the energetics of amino acid polymerizations presented in earlier reports, these results suggest the following. Hadean alkaline hydrothermal settings, where steep pH and temperature gradients may have existed between cool, slightly acidic Hadean ocean water and hot, alkaline hydrothermal fluids at the vent-ocean interface, may be energetically the most suitable environment for the synthesis and polymerization of amino acids.

  1. Control Effect of Regulating pH and Alkalinity on Iron Release in Drinking Water Distribution System%调节pH值和碱度对给水管网铁释放的控制作用

    Institute of Scientific and Technical Information of China (English)

    米子龙; 张晓健; 王洋; 陈超; 顾军农

    2012-01-01

    The control effect of regulating pH and alkalinity on iron release in the drinking water distribution system was investigated. Experiments using the pipe section simulation reactor found that the iron release rate, turbidity and color decreased significantly with increasing pH and alkalinity. Specifically, after increasing pH from 7.6 to 8.2 for 15 d, the iron release rate, turbidity and color decreased by 47% , 54% and 46% , respectively. Meanwhile, increasing alkalinity from 135 mg/L to 260 mg/L (calculated as CaCO3) for 15 d, the iron release rate, turbidity and color decreased by 50% , 58% and 52% , respectively. The cost-effectiveness of regulating pH and alkalinity to control iron release in drinking water was evaluated. The results showed that the cost of regulating pH of finished water was appropriate. This method can be used as an emergency water treatment technology for red water control.%利用管段模拟反应器,定量分析了调节pH值和调节碱度技术对给水管网铁释放的控制作用.研究发现,提高pH值和增加碱度均可使管网铁释放速率、浊度和色度明显降低.调节pH值从7.6增加至8.2,15 d后管网铁释放速率降低了47%,浊度降低了54%,色度降低了46%;调节碱度从135 mg/L增加至260 mg/L(以CaCO3计),15 d后管网铁释放速率降低了50%,浊度降低了58%,色度降低了52%.对比评价了调节pH值和调节碱度技术的经济性,结果表明;调节出厂水pH值控制管网铁释放的经济成本适宜,可作为突发性管网“黄水”问题的应急控制技术.

  2. Clonal integration enhances the performance of a clonal plant species under soil alkalinity stress.

    Directory of Open Access Journals (Sweden)

    Wenjun Zhang

    Full Text Available Clonal plants have been shown to successfully survive in stressful environments, including salinity stress, drought and depleted nutrients through clonal integration between original and subsequent ramets. However, relatively little is known about whether clonal integration can enhance the performance of clonal plants under alkalinity stress. We investigated the effect of clonal integration on the performance of a typical rhizomatous clonal plant, Leymus chinensis, using a factorial experimental design with four levels of alkalinity and two levels of rhizome connection treatments, connected (allowing integration and severed (preventing integration. Clonal integration was estimated by comparing physiological and biomass features between the rhizome-connected and rhizome-severed treatments. We found that rhizome-connected treatment increased the biomass, height and leaf water potential of subsequent ramets at highly alkalinity treatments but did not affect them at low alkalinity treatments. However, rhizome-connected treatment decreased the root biomass of subsequent ramets and did not influence the photosynthetic rates of subsequent ramets. The biomass of original ramets was reduced by rhizome-connected treatment at the highest alkalinity level. These results suggest that clonal integration can increase the performance of clonal plants under alkalinity stress. Rhizome-connected plants showed dramatically increased survival of buds with negative effects on root weight, indicating that clonal integration influenced the resource allocation pattern of clonal plants. A cost-benefit analysis based on biomass measures showed that original and subsequent ramets significantly benefited from clonal integration in highly alkalinity stress, indicating that clonal integration is an important adaptive strategy by which clonal plants could survive in local alkalinity soil.

  3. Involvement of CD36 and intestinal alkaline phosphatases in fatty acid transport in enterocytes, and the response to a high-fat diet.

    Science.gov (United States)

    Lynes, Matthew D; Widmaier, Eric P

    2011-02-28

    The vertebrate intestine is notable for its plasticity in response to environmental, pathologic, reproductive, and dietary challenges. The molecular mechanisms of intestinal adaptations typically involve both morphologic and functional changes. In response to chronic ingestion of a high-fat diet, for example, the mammalian small intestine quickly adapts to efficiently accommodate increased transport of long-chain fatty acids across the mucosa. Whereas this may be adaptive in the short term, in the long term it may contribute to the pathologies associated with chronic high-fat diets in humans and other mammals. This review focuses on some of the known and putative mechanisms by which fatty acids are transported across the intestinal epithelium in addition to simple diffusion, and how these mechanisms may be regulated in part by a high-fat diet. A model is proposed in which two key proteins, CD36 and the enzyme intestinal alkaline phosphatase, work in a coordinated manner to optimize fatty acid transport across enterocytes in mice. Copyright © 2010 Elsevier Inc. All rights reserved.

  4. High serum alkaline phosphatase cooperating with MMP-9 predicts metastasis and poor prognosis in patients with primary osteosarcoma in Southern China

    Directory of Open Access Journals (Sweden)

    Han Ju

    2012-02-01

    Full Text Available Abstract Background Osteosarcoma is a malignant tumor with high ability to form invasion and metastasis. Identifying prognostic factor in osteosarcoma is helpful to select those patients for more aggressive management. Our study evaluated serum alkaline phosphatase (ALP cooperating with matrix metalloproteinase-9 (MMP-9 as an important prognostic predictor for local recurrence and distant metastasis of osteosarcoma. Methods 177 cases were included from the osteosarcoma patients treated at 1st Affiliated Hospital of Sun Yat-sen University (1999-2008. Pre-chemotherapy serum ALP (pre-ALP were studied and correlated with tumor recurrence, lung metastasis and patient survival. MMP-9 protein in tumor tissues was detected by immunohistochemistry and correlated with pre-ALP level. Results Pre-ALP were partitioned into normal, high, and very high groups, in each group the incidence of metastases was 12.2%, 21.2% and 34.6%, respectively (p = 0.007. In the three groups the mean disease-free survival (DFS was 57 ± 3.15, 28 ± 3.57 and 14 ± 3.35 months, respectively (p Conclusions Pre-ALP was an independent prognostic factor for the survival of osteosarcoma patients in south China, and correlated with MMP-9 expression and lung metastasis. ALP can also serve as a prognostic marker for treatment, and merit large-scale validation studies.

  5. High serum alkaline phosphatase cooperating with MMP-9 predicts metastasis and poor prognosis in patients with primary osteosarcoma in Southern China.

    Science.gov (United States)

    Han, Ju; Yong, Bicheng; Luo, Canqiao; Tan, Pingxian; Peng, Tingsheng; Shen, Jingnan

    2012-02-15

    Osteosarcoma is a malignant tumor with high ability to form invasion and metastasis. Identifying prognostic factor in osteosarcoma is helpful to select those patients for more aggressive management. Our study evaluated serum alkaline phosphatase (ALP) cooperating with matrix metalloproteinase-9 (MMP-9) as an important prognostic predictor for local recurrence and distant metastasis of osteosarcoma. 177 cases were included from the osteosarcoma patients treated at 1st Affiliated Hospital of Sun Yat-sen University (1999-2008). Pre-chemotherapy serum ALP (pre-ALP) were studied and correlated with tumor recurrence, lung metastasis and patient survival. MMP-9 protein in tumor tissues was detected by immunohistochemistry and correlated with pre-ALP level. Pre-ALP were partitioned into normal, high, and very high groups, in each group the incidence of metastases was 12.2%, 21.2% and 34.6%, respectively (p = 0.007). In the three groups the mean disease-free survival (DFS) was 57 ± 3.15, 28 ± 3.57 and 14 ± 3.35 months, respectively (p lung metastasis rate decreased (p = 0.028); DFS and OS were both prolonged (p osteosarcoma patients in south China, and correlated with MMP-9 expression and lung metastasis. ALP can also serve as a prognostic marker for treatment, and merit large-scale validation studies.

  6. High-dynamic-range water window ptychography

    CERN Document Server

    Rose, Max; Senkbeil, Tobias; von Gundlach, Andreas R; Stuhr, Susan; Rumancev, Christoph; Besedin, Ilya; Skopintsev, Petr; Viefhaus, Jens; Rosenhahn, Axel; Vartanyants, Ivan A

    2016-01-01

    Ptychographic imaging with soft X-rays, especially in the water window energy range, suffers from limited detector dynamic range that directly influences the maximum spatial resolution achievable. High-dynamic-range data can be obtained by multiple exposures. By this approach we have increased the dynamic range of a ptychographic data set by a factor of 76 and obtained diffraction signal till the corners of the detector. The real space half period resolution was improved from 50 nm for the single exposure data to 18 nm for the high-dynamic-range data.

  7. Association of alkaline phosphatase phenotypes with arthritides

    Directory of Open Access Journals (Sweden)

    Padmini A

    2004-01-01

    Full Text Available Arthritides, a symmetrical polyarticular disease of the bone are a heterogenous group of disorders in which hereditary and environmental factors in combination with an altered immune response appear to play a causative and pathogenic role in its occurrence. Alkaline phosphatase (ALP is an enzyme found in all tissues, with particularly high concentrations of ALP observed in the liver, bile ducts, placenta, and bone.Alkaline phosphatase is an orthophosphoric monoester phosphohydrolase catalyzing the hydrolysis of organic esters at alkaline pH, indicating that alkaline phosphatase is involved in fundamental biological processes.1 The present study envisages on identifying the specific electromorphic association of alkaline phosphatase with arthritides. Phenotyping of serum samples was carried out by PAGE (Polyacrylamide gel electrophoresis following Davies (19642 protocol on 41 juvenile arthritis, 150 rheumatoid arthritis and 100 osteo arthritis apart from, 25 normal children and 100 adult healthy subjects. Phenotyping of alkaline phosphatase revealed an increase in preponderance of p+ and p++ phenotypes in juvenile, rheumatoid and osteo arthritic patients. However a significant association of these phenotypes was observed only with rheumatoid arthritis condition (c2:17.46. Similarly, a significant increase of p+ phenotypes in female rheumatoid arthritis patients was observed (c2:14.973, suggesting that the decrease in p° (tissue non specific synthesis/secretion of alkaline phosphatase could be associated with decreased mineralization and ossification process in arthritis condition.

  8. Treatment of petroleum contaminated soils by hot alkaline water combined with mechanical dewatering process%热碱水洗-机械脱水工艺处理石油污染土壤

    Institute of Scientific and Technical Information of China (English)

    谭蔚; 邢帅; 贡皓霜; 刘丽艳

    2016-01-01

    The treatment of petroleum contaminated soils by hot alkaline water combined with mechanical dewatering process is conducted in an oil field in China.The effect of NaOH concentration,alkaline water-oily sludge ratio and temperature on the oil-removal effect is studied.The factors affecting the filtration and dewatering performance of the petroleum contaminated soils treated by hot alkaline water,such as the types and contents flocculating agents,are also investigated.The results show that residual oil is firstly decreased and then increased with increasing the concentration of NaOH and alkaline water-oily sludge ratio.But,the increase in temperature leds to th drastical decrease in residual oil.The proper parameters for hot alkaline water treatment are 0.2% of NaOH,4:1 of alkaline water-oily sludge ratio and 80℃ of temperature.In the experiments of dewatering,the flocculation capability of AlCl3,Fe2 (SO4) 3 and PAC are strongly influenced by pH.The Ca2+ ions effectively incresase the flocculation of tiny particles by forming Ca(OH) + and Ca(OH) 2,thus greatly improving the filtration and dewatering performance.When the concentration of CaCl2 is 0.8%,the best filtration and dewatering performance can be achieved based on the filtration rate,moisture content and residual oil ratio in the petroleum contaminated soils.%采用热碱水洗-机械脱水工艺对国内某油田区的石油污染土壤进行处理.考察了热碱水洗条件(包括NaOH质量分数、液固比、洗涤温度)对含油土壤脱油效果的影响,及絮凝剂种类、质量分数对热碱水洗法处理后的含油污泥过滤脱水性能的影响.结果表明,残余油质量分数随NaOH质量分数及液固比的升高呈现先下降后上升的趋势,而随温度的升高呈现持续下降的趋势.在探究含油污泥脱水性能实验中发现铝盐及铁盐类絮凝剂对于高碱性污泥的适应性较差,而钙盐可以很好地破坏油水细砂混合层,有效地改善含油

  9. Development of alkaline fuel cells.

    Energy Technology Data Exchange (ETDEWEB)

    Hibbs, Michael R.; Jenkins, Janelle E.; Alam, Todd Michael; Janarthanan, Rajeswari; Horan, James L.; Caire, Benjamin R.; Ziegler, Zachary C.; Herring, Andrew M.; Yang, Yuan; Zuo, Xiaobing; Robson, Michael H.; Artyushkova, Kateryna; Patterson, Wendy; Atanassov, Plamen Borissov

    2013-09-01

    This project focuses on the development and demonstration of anion exchange membrane (AEM) fuel cells for portable power applications. Novel polymeric anion exchange membranes and ionomers with high chemical stabilities were prepared characterized by researchers at Sandia National Laboratories. Durable, non-precious metal catalysts were prepared by Dr. Plamen Atanassovs research group at the University of New Mexico by utilizing an aerosol-based process to prepare templated nano-structures. Dr. Andy Herrings group at the Colorado School of Mines combined all of these materials to fabricate and test membrane electrode assemblies for single cell testing in a methanol-fueled alkaline system. The highest power density achieved in this study was 54 mW/cm2 which was 90% of the project target and the highest reported power density for a direct methanol alkaline fuel cell.

  10. In situ arsenic removal in an alkaline clastic aquifer

    Science.gov (United States)

    Welch, A.H.; Stollenwerk, K.G.; Paul, A.P.; Maurer, D.K.; Halford, K.J.

    2008-01-01

    In situ removal of As from ground water used for water supply has been accomplished elsewhere in circum-neutral ground water containing high dissolved Fe(II) concentrations. The objective of this study was to evaluate in situ As ground-water treatment approaches in alkaline ground-water (pH > 8) that contains low dissolved Fe (water in the two aquifers studied are similar except for the inorganic As species. Although total inorganic As concentrations were similar, one aquifer has dominantly aqueous As(III) and the other has mostly As(V). Dissolved O2, Fe(II), and HCl were added to water and injected into the two aquifers to form Fe-oxide and lower the pH to remove As. Cycles of injection and withdrawal involved varying Fe(II) concentrations in the injectate. The As concentrations in water withdrawn from the two aquifers were as low as 1 and 6 ??g/L, with greater As removal from the aquifer containing As(V). However, Fe and Mn concentrations increased to levels greater than US drinking water standards during some of the withdrawal periods. A balance between As removal and maintenance of low Fe and Mn concentrations may be a design consideration if this approach is used for public-supply systems. The ability to lower As concentrations in situ in high-pH ground water should have broad applicability because similar high-As ground water is present in many parts of the world. ?? 2008.

  11. Remediation of Former Manufactured Gas Plant Tars Using Alkaline Flushing

    Science.gov (United States)

    Hauswirth, S.; Rylander, S.; Birak, P. S.; Miller, C. T.

    2010-12-01

    The remediation of former manufactured gas plant (FMGP) tars in the subsurface is particularly difficult due to the wetting behavior and high viscosities of these dense non-aqueous liquids (DNAPLs). Alkaline flooding is a technique which has proven effective in improving the recovery of crude oils, which share some characteristics with FMGP tars. For this study, we measured the effect of NaOH solutions on interfacial tension and conducted column experiments to investigate the feasibility of applying this technique to FMGP tars. The pendant drop technique was used to measure interfacial tensions for solutions ranging from 0-1% NaOH. Column experiments were conducted by contaminating sands with tars recovered from a FMGP then flushing the columns with NaOH solutions. A final, 70% v/v ethanol cosolvent flush was conducted to investigate the effectiveness of a two-stage remediation approach. The mass removal of tar, as well as 26 individual PAHs, was measured, along with the aqueous phase mass flux of PAHs after each flushing stage. The interfacial tension was reduced from about 20 mN/m with pure water to a minimum of 0.05 mN/m at a concentration of 0.1% NaOH. In the column experiments, alkaline flushing resulted in a 50% reduction of the residual saturation. Aqueous phase PAH concentrations, however, were similar before and after the alkaline flushing stage. The combination of alkaline and cosolvent flushing resulted in an overall reduction of 95% of the total mass of the 16 EPA PAHs. Final aqueous phase concentrations were reduced significantly for lower molecular weight PAHs, but increased slightly for the higher molecular weight compounds, likely due to their increased mole fraction within the remaining tar. Additional work is being conducted to improve the effectiveness of the alkaline flushing through the use of surfactants and polymers.

  12. Bottom-up synthesis of high-performance nitrogen-enriched transition metal/graphene oxygen reduction electrocatalysts both in alkaline and acidic solution

    Science.gov (United States)

    Lai, Qingxue; Gao, Qingwen; Su, Qi; Liang, Yanyu; Wang, Yuxi; Yang, Zhi

    2015-08-01

    Oxygen reduction electrocatalysts with low cost and excellent performance are urgently required for large-scale application in fuel cells and metal-air batteries. Though nitrogen-enriched transition metal/graphene hybrids (N-TM/G, TM = Fe, Co, and Ni and related compounds) have been developed as novel substitutes for precious metal catalysts (PMCs) towards oxygen reduction reaction (ORR), a significant challenge still remains for simple and efficient synthesis of N-TM/G catalysts with satisfactory electrocatalytic behavior. Herein, we demonstrate a universal bottom-up strategy for efficient fabrication of strongly-coupled N-TM/G catalysts. This strategy is implemented via direct polymerization of transition metal phthalocyanine (TMPc) in the two-dimensional confined space of in situ generated g-C3N4 and a subsequent pyrolysis. Such a space-confined bottom-up synthesis route successfully constructs a strongly-coupled triple junction of transition metal-graphitic carbon-nitrogen-doped graphene (TM-GC-NG) with extensive controllability over the specific surface area, nitrogen content/types as well as the states of metal. As a result, the optimized N-Fe/G materials have promising potential as high-performance NPMCs towards ORR both in alkaline and acidic solution.Oxygen reduction electrocatalysts with low cost and excellent performance are urgently required for large-scale application in fuel cells and metal-air batteries. Though nitrogen-enriched transition metal/graphene hybrids (N-TM/G, TM = Fe, Co, and Ni and related compounds) have been developed as novel substitutes for precious metal catalysts (PMCs) towards oxygen reduction reaction (ORR), a significant challenge still remains for simple and efficient synthesis of N-TM/G catalysts with satisfactory electrocatalytic behavior. Herein, we demonstrate a universal bottom-up strategy for efficient fabrication of strongly-coupled N-TM/G catalysts. This strategy is implemented via direct polymerization of transition

  13. Second generation of pseudotype-based serum neutralization assay for Nipah virus antibodies: sensitive and high-throughput analysis utilizing secreted alkaline phosphatase.

    Science.gov (United States)

    Kaku, Yoshihiro; Noguchi, Akira; Marsh, Glenn A; Barr, Jennifer A; Okutani, Akiko; Hotta, Kozue; Bazartseren, Boldbaatar; Fukushi, Shuetsu; Broder, Christopher C; Yamada, Akio; Inoue, Satoshi; Wang, Lin-Fa

    2012-01-01

    Nipah virus (NiV), Paramyxoviridae, Henipavirus, is classified as a biosafety level (BSL) 4 pathogen, along with the closely related Hendra virus (HeV). A novel serum neutralization test was developed for measuring NiV neutralizing antibodies under BSL2 conditions using a recombinant vesicular stomatitis virus (VSV) expressing secreted alkaline phosphatase (SEAP) and pseudotyped with NiV F/G proteins (VSV-NiV-SEAP). A unique characteristic of this novel assay is the ability to obtain neutralization titers by measuring SEAP activity in supernatant using a common ELISA plate reader. This confers a remarkable advantage over the first generation of NiV-pseudotypes expressing green fluorescent protein or luciferase, which require expensive and specific measuring equipment. Using panels of NiV- and HeV-specific sera from various species, the VSV-NiV-SEAP assay demonstrated neutralizing antibody status (positive/negative) consistent with that obtained by conventional live NiV test, and gave higher antibody titers than the latter. Additionally, when screening sixty-six fruit bat sera at one dilution, the VSV-NiV-SEAP assay produced identical results to the live NiV test and only required a very small amount (2μl) of sera. The results suggest that this novel VSV-NiV-SEAP assay is safe, useful for high-throughput screening of sera using an ELISA plate reader, and has high sensitivity and specificity.

  14. Sources of alkalinity and acidity along an acid mine drainage remediated stream in SE Ohio: Hewett Fork

    Science.gov (United States)

    Schleich, K. L.; Lopez, D. A.; Bowman, J. R.; Kruse, N. A.; Mackey, A. L.; VanDervort, D.; Korenowsky, R.

    2013-12-01

    In the remediation of acid mine drainage impacted streams, it is important to locate and quantify the sources of acidity and alkalinity inputs. These parameters affect the long-term recovery of the stream habitat. Previous studies have focused on treating the remediation of AMD as point source pollution, targeting the main acid seep for remediation. However, in the interest of biological and chemical recovery, it is important to understand how sources of alkalinity and acidity, throughout the stream, affect water and sediment quality. The Hewett Fork watershed in Southeastern Ohio is impacted by AMD from the AS-14 mine complex in Carbondale, Ohio. In attempts to remediate the stream, the water is being treated with a continuous alkaline input from a calcium oxide doser. While the section of watershed furthest downstream from the doser is showing signs of recovery, the water chemistry and aquatic life near the doser are still impacted. The objective of this study is to examine and model the chemistry of the tributaries of Hewett Fork to see how they contribute to the alkalinity and acidity budgets of the main stem of the stream. By examining the inputs of tributaries into the main stem, this project aims to understand processes occurring during remediation throughout the entire stream. Discharge was measured during a dry period in October, 2012 and at a high flow in May, 2013. Field parameters such as pH, TDS, DO, alkalinity and acidity were also determined. Low flow data collected during fall sampling shows variable flow along the stream path, the stream gains water from ground water at some points while it loses water at others, potentially due to variable elevation of the water table. Flow data collected during spring sampling shows that Hewett Fork is a gaining stream during that period with inputs from groundwater contributing to increasing flow downstream. When using this data to calculate the net alkalinity load along the stream, there are areas with alkaline

  15. High Resolution Airborne Shallow Water Mapping

    Science.gov (United States)

    Steinbacher, F.; Pfennigbauer, M.; Aufleger, M.; Ullrich, A.

    2012-07-01

    In order to meet the requirements of the European Water Framework Directive (EU-WFD), authorities face the problem of repeatedly performing area-wide surveying of all kinds of inland waters. Especially for mid-sized or small rivers this is a considerable challenge imposing insurmountable logistical efforts and costs. It is therefore investigated if large-scale surveying of a river system on an operational basis is feasible by employing airborne hydrographic laser scanning. In cooperation with the Bavarian Water Authority (WWA Weilheim) a pilot project was initiated by the Unit of Hydraulic Engineering at the University of Innsbruck and RIEGL Laser Measurement Systems exploiting the possibilities of a new LIDAR measurement system with high spatial resolution and high measurement rate to capture about 70 km of riverbed and foreland for the river Loisach in Bavaria/Germany and the estuary and parts of the shoreline (about 40km in length) of lake Ammersee. The entire area surveyed was referenced to classic terrestrial cross-section surveys with the aim to derive products for the monitoring and managing needs of the inland water bodies forced by the EU-WFD. The survey was performed in July 2011 by helicopter and airplane and took 3 days in total. In addition, high resolution areal images were taken to provide an optical reference, offering a wide range of possibilities on further research, monitoring, and managing responsibilities. The operating altitude was about 500 m to maintain eye-safety, even for the aided eye, the airspeed was about 55 kts for the helicopter and 75 kts for the aircraft. The helicopter was used in the alpine regions while the fixed wing aircraft was used in the plains and the urban area, using appropriate scan rates to receive evenly distributed point clouds. The resulting point density ranged from 10 to 25 points per square meter. By carefully selecting days with optimum water quality, satisfactory penetration down to the river bed was achieved

  16. High levels of both serum gamma-glutamyl transferase and alkaline phosphatase are independent preictors of mortality in patients with stage 4-5 chronic kidney disease.

    Science.gov (United States)

    Caravaca-Fontán, Fernando; Azevedo, Lilia; Bayo, Miguel Ángel; Gonzales-Candia, Boris; Luna, Enrique; Caravaca, Francisco

    High serum gamma-glutamyl transferase (GGT) levels are associated with increased mortality in the general population. However, this association has scarcely been investigated in patients with chronic kidney disease (CKD). This study aims to investigate the clinical characteristics of CKD patients with abnormally elevated serum GGT, and its value for predicting mortality. Retrospective observational study in a population cohort of adults with stage 4-5 CKD not yet on dialysis. Demographic, clinical, and biochemical parameters of prognostic interest were recorded and used to characterise CKD patients with high levels of GGT (>36 IU/l). Cox proportional hazard regression models were used to analyse the influence of baseline serum GGT and alkaline phosphatase (ALP) levels on mortality for whatever reason. The study group consisted of 909 patients (mean age 65±15 years). Abnormally elevated GGT or ALP levels at baseline were observed in 209 (23%) and 172 (19%) patients, respectively, and concomitant elevations of GGT and ALP in 68 (7%). High GGT levels were associated with higher comorbidity burden, and a biochemical profile characterised by higher serum concentration of uric acid, triglycerides, alanine aminotransferase, ferritin, and C-reactive. During the study period, 365 patients (40%) died (median survival time=74 months). In adjusted Cox regression models, high levels of GGT (hazard ratio [HR]=1.39;CI 95%: 1.09-1.78, P=.009) and ALP (HR=1.31; CI95%: 1.02-1.68, P=.038) were independently associated with mortality. High serum levels of GGT are independent predictors of mortality in CKD patients. Copyright © 2016 Sociedad Española de Nefrología. Published by Elsevier España, S.L.U. All rights reserved.

  17. High background radiation areas of Ram sar in Iran: evaluation of DNA damage by alkaline single cell gel electrophoresis (SCE)

    Energy Technology Data Exchange (ETDEWEB)

    Masoomi, J.R. [Biophysics Department, College of Sciences, Tarbiat Modarres University, Tehran (Iran, Islamic Republic of); Mohammadi, Sh. [Radiation Molecular Genetic Laboratory, National Radiation Protection Department (NRPD), Iranian Nuclear Regulatory Authority (INRA), P.O. Box 14155-4494, Tehran (Iran, Islamic Republic of); Amini, M. [Faculty of Pharmacy, Azad University of Tehran (Iran, Islamic Republic of); Ghiassi-Nejad, M. [Biophysics Department, College of Sciences, Tarbiat Modarres University, Tehran (Iran, Islamic Republic of)]. E-mail: ghiassi@mailcity.com

    2006-07-01

    The hot springs in special areas in Ram sar, a northern coastal town in Iran, contain {sup 226}Ra and {sup 222}Rn. The natural radiation effects, radiosensitivity or adaptive responses, on the inhabitants of high natural radiation in Ram sar were studied. The single cell gel electrophoresis was used to monitor DNA damages. Three groups of volunteers were selected, one from high natural background radiation areas as the case group and two from normal background radiation areas as controls (control 1 and control 2). The latter one had the similar living situation to case group while the other (control 2) had different living situation from the other groups. Peripheral blood mononuclear cells (PMNCs) were separated and irradiated by {sup 6}Co source at five different gamma doses. It was found that the spontaneous level of DNA damage and the induced DNA damage in all challenging doses in case group was considerably higher than control groups (p < 0.05). On the other hand, the repair rate in those volunteers, who received less than 10.2 mSv/y was significantly more than the control groups. In the contrary, individuals who live in homes with more than 10.2 mSv/y had incomplete repair. Additionally the plasma and urinary levels of vitamin C were measured spectrophotometrically. Although the concentration of vitamin C of plasma was equal in case and control 1 groups, the urinary level of vitamin C was found to be lower in the case group.

  18. The High Altitude Water Cherenkov Observatory

    Science.gov (United States)

    Mostafa, Miguel; HAWC Collaboration

    2016-03-01

    The High Altitude Water Cherenkov (HAWC) Observatory is a continuously operated, wide field of view experiment comprised of an array of 300 water Cherenkov detectors (WCDs) to study transient and steady emission of TeV gamma and cosmic rays. Each 200000 l WCD is instrumented with 4 PMTs providing charge and timing information. The array covers ~22000 m2 at an altitude of 4100 m a.s.l. inside the Pico de Orizaba national park in Mexico. The high altitude, large active area, and optical isolation of the PMTs allows us to reliably estimate the energy and determine the arrival direction of gamma and cosmic rays with significant sensitivity over energies from several hundred GeV to a hundred TeV. Continuously observing 2 / 3 of the sky every 24 h, HAWC plays a significant role as a survey instrument for multi-wavelength studies. The performance of HAWC makes possible the detection of both transient and steady emissions, the study of diffuse emission and the measurement of the spectra of gamma-ray sources at TeV energies. HAWC is also sensitive to the emission from GRBs above 100 GeV. I will highlight the results from the first year of operation of the full HAWC array, and describe the ongoing site work to expand the array by a factor of 4 to explore the high energy range.

  19. Solar light (hv) and H2O2/hv photo-disinfection of natural alkaline water (pH 8.6) in a compound parabolic collector at different day periods in Sahelian region.

    Science.gov (United States)

    Ndounla, J; Pulgarin, C

    2015-11-01

    The photo-disinfection of natural alkaline surface water (pH 8.6 ± 0.3) for drinking purposes was carried out under solar radiation treatments. The enteric bacteria studied were the wild total coliforms/Escherichia coli (10(4) CFU/ml) and Salmonella spp. (10(4) CFU/ml) naturally present in the water. The photo-disinfection of a 25-l water sample was carried out in a solar compound parabolic collector (CPC) in the absence and in the presence of hydrogen peroxide (H2O2). The addition of H2O2 (10 mg/L) to the sample water was sufficient to enhance the photo-disinfection and ensure an irreversible lethal action on the wild enteric bacteria contents of the sample. The inactivation kinetic of the system was significantly enhanced compared to the one carried out without H2O2 addition. The effect of the solar radiation parameters on the efficiency of the photo-disinfection were assessed. The pH has increased during the treatment in all the photo-disinfection processes (hv and H2O2/hv). The Salmonella spp strain has shown the best effective inactivate time in alkaline water than the one recorded under acidic or near-neutral conditions. The evolution of some physico-chemical parameters of the water (turbidity, NO2(-), NO3(-), NH4(+), HPO4(2-), and bicarbonate (HCO3(-))) was monitored during the treatment. Finally, the possible mechanistic process involved during the enteric bacteria inactivation was suggested.

  20. Origin and significance of the Permian high-K calc-alkaline magmatism in the central-eastern Southern Alps, Italy

    Science.gov (United States)

    Rottura, A.; Bargossi, G. M.; Caggianelli, A.; Del Moro, A.; Visonà, D.; Tranne, C. A.

    1998-12-01

    The Atesina Volcanic District, the Monte Luco volcanics, and the Cima d'Asta, Bressanone-Chiusa, Ivigna, Monte Croce and Monte Sabion intrusions, in the central-eastern Southern Alps, form a wide calc-alkaline association of Permian age (ca. 280-260 Ma). The magmatism originated during a period of post-orogenic extensional/transtensional faulting which controlled the magma ascent and emplacement. The magmatic products are represented by a continuum spectrum of rock types ranging from basaltic andesites to rhyolites, and from gabbros to monzogranites, with preponderance of the acidic terms. They constitute a metaluminous to weakly peraluminous series showing mineralogical, petrographic and chemical characteristics distinctive of the high-K calc-alkaline suites. In the MORB-normalized trace element diagrams, the most primitive volcanic and plutonic rocks (basaltic andesites and gabbros with Mg No.=66 to 70; Ni=25 to 83 ppm; Cr=248 to 679 ppm) show LILE and LREE enriched patterns with troughs at Nb-Ta and Ti, a distinctive feature of subduction-related magmas. Field, petrographic, geochemical and isotopic evidence (initial 87Sr/ 86Sr ratios from 0.7057 to 0.7114; ɛNd values from -2.7 to -7.4; ∂ 18O values between 7.6 and 9.5‰) support a hybrid nature for both volcanic and plutonic rocks, originating through complex interactions between mantle-derived magmas and crustal materials. Only the scanty andalusite-cordierite and orthopyroxene-cordierite bearing peraluminous granites in the Cima d'Asta and Bressanone-Chiusa intrusive complexes can be interpreted as purely crustal melts (initial 87Sr/ 86Sr=0.7143-0.7167; initial ɛNd values between -7.9 and -9.6, close to average composition of the granulitic metasedimentary crust from the Ivrea Zone in the western Southern Alps). Although the Permian magmatism shows geochemical characteristics similar to those of arc-related suites, palaeogeographic restorations, and geological and tectonic evidence, seem not to support

  1. Enhanced reductive dechlorination of tetrachloroethene by nano-sized mackinawite with cyanocobalamin in a highly alkaline condition.

    Science.gov (United States)

    Kim, Sangwoo; Park, Taehyung; Lee, Woojin

    2015-03-15

    In this study, we characterize the reductive dechlorination of tetrachloroethene (PCE) by nano-sized mackinawite (nFeS) with cobalamin (Cbl(III)) at a high pH and investigate the effects of environmental factors, including the concentrations of the target contaminant, reductant, and catalyst and suspension ions on the dechlorination kinetics of PCE. Ninety five percent of the PCE was degraded by nFeS with Cbl(III) in 15 h. Cyclic voltammetry conducted with regard to the reductive dechlorination showed a higher redox potential of mackinawite under a high-pH condition (-1.01 V), suggesting that the oxidation state of the central cobalt ion in the cobalamin could be reduced to Cbl(I). The change of cobalamin species on the nFeS surface was verified under different pH conditions by UV-vis spectroscopy. The rate constant of PCE dechlorination increased from 0.1582 to 0.4284 h(-1) due to the increase in the nFeS content (2.085-20.85 g/L). As the concentration of Cbl(III) increased from 0 to 0.5 mM, the dechlorination kinetics of PCE was accelerated (0-1.4091 h(-1)) but reached a state of equilibrium from 0.5 to 1 mM. The increase in the initial PCE concentration (0.035-1.0 mM) slowed down the dechlorination kinetics (0.2036-0.0962 h(-1)). The dechlorination kinetics was enhanced by 1.5-11 times when 10 mM of ions (Na(+), K(+), Mg(2+), Ca(2+), CO3(2-), SO4(2-), and NO3(-)) were added, while an addition of HCO3 decelerated it by 10 times. This study can provide background knowledge pertaining to the PCE dechlorination by a natural reductant under a high-pH condition and the effect of environmental factors on the dechlorination kinetics for the development of novel remediation technologies. Copyright © 2015 Elsevier Ltd. All rights reserved.

  2. The High Altitude Water Cherenkov (HAWC) Observatory

    Science.gov (United States)

    Springer, Wayne

    2014-06-01

    The High Altitude Water Cherenkov (HAWC) observatory is a continuously operated, wide field of view detector based upon a water Cherenkov technology developed by the Milagro experiment. HAWC observes, at an elevation of 4100 m on Sierra Negra Mountain in Mexico, extensive air showers initiated by gamma and cosmic rays. The completed detector will consist of 300 closely spaced water tanks each instrumented with four photomultiplier tubes that provide timing and charge information used to reconstruct energy and arrival direction. HAWC has been optimized to observe transient and steady emission from point as well as diffuse sources of gamma rays in the energy range from several hundred GeV to several hundred TeV. Studies in solar physics as well as the properties of cosmic rays will also be performed. HAWC has been making observations at various stages of deployment since completion of 10% of the array in summer 2012. A discussion of the detector design, science capabilities, current construction/commissioning status, and first results will be presented...

  3. High temperature measurement of water vapor absorption

    Science.gov (United States)

    Keefer, Dennis; Lewis, J. W. L.; Eskridge, Richard

    1985-01-01

    An investigation was undertaken to measure the absorption coefficient, at a wavelength of 10.6 microns, for mixtures of water vapor and a diluent gas at high temperature and pressure. The experimental concept was to create the desired conditions of temperature and pressure in a laser absorption wave, similar to that which would be created in a laser propulsion system. A simplified numerical model was developed to predict the characteristics of the absorption wave and to estimate the laser intensity threshold for initiation. A non-intrusive method for temperature measurement utilizing optical laser-beam deflection (OLD) and optical spark breakdown produced by an excimer laser, was thoroughly investigated and found suitable for the non-equilibrium conditions expected in the wave. Experiments were performed to verify the temperature measurement technique, to screen possible materials for surface initiation of the laser absorption wave and to attempt to initiate an absorption wave using the 1.5 kW carbon dioxide laser. The OLD technique was proven for air and for argon, but spark breakdown could not be produced in helium. It was not possible to initiate a laser absorption wave in mixtures of water and helium or water and argon using the 1.5 kW laser, a result which was consistent with the model prediction.

  4. Fever of unknown origin (FUO) due to large B-cell lymphoma: the diagnostic significance of highly elevated alkaline phosphatase and serum ferritin levels.

    Science.gov (United States)

    Cunha, Burke A; Petelin, Andrew

    2013-01-01

    Determining the cause of fever of unknown origin (FUO) is often a vexing and difficult diagnostic process. In most cases, the signs and symptoms in adult FUOs suggest a malignant, infectious, or rheumatic/inflammatory etiology. The diagnosis of FUO may be narrowed if specific findings are present (eg, hepatosplenomegaly) that limit the diagnostic possibilities. Infectious causes of FUO with hepatosplenomegaly include miliary tuberculosis, typhoid fever, and visceral leishmanosis (kala-azar). However, FUOs with hepatosplenomegaly are most often attributable to malignant neoplasms, ie, Hodgkin lymphoma, non-Hodgkin lymphoma, hepatoma, hypernephroma (renal-cell carcinoma), or preleukemia. We present a middle-aged woman with FUO and hepatosplenomegaly. Inpatient nonspecific laboratory findings included a highly elevated erythrocyte sedimentation rate, and elevated levels of vitamin B12, lactate dehydrogenase, angiotensin-converting enzyme, ferritin, and alkaline phosphatase. These individual findings are nonspecific, but together point to a lymphoma. An important test in differentiating malignant from infectious FUOs is the Naprosyn test, and her Naprosyn test was positive, indicating malignancy. A gallium scan suggested a uterine lymphoma. A computed tomography scan revealed hepatosplenomegaly, but the gallium uptake was not increased in her liver and spleen. Uterine and bone marrow biopsies were negative for lymphoma. We present a case of FUO with hepatosplenomegaly attributable to large B-cell lymphoma as diagnosed via liver biopsy. Copyright © 2013 Elsevier Inc. All rights reserved.

  5. [High current microsecond pulsed hollow cathode lamp excited ionic fluorescence spectrometry of alkaline earth elements in inductively coupled plasma with a Fassel-torch].

    Science.gov (United States)

    Zhang, Shao-Yu; Gong, Zhen-Bin; Huang, Ben-Li

    2006-02-01

    High current microsecond pulsed hollow cathode lamp (HCMP-HCL) excited ionic fluorescence spectrometry (IFS) of alkaline earth elements in inductively coupled plasma (ICP) with a Fassel-torch has been investigated. In wide condition ranges only IFS was observed, whilst atomic fluorescence spectrometry (AFS) was not detectable. More intense ionic fluorescence signal was observed at lower observation heights and at lower incident RF powers. Without introduction of any reduction organic gases into the ICP, the limit of detection (LOD, 3sigma) of Ba was improved by 50-fold over that of a conventional pulsed (CP) HCL with the Baird sleeve-extended torch. For Ca and Sr, the LODs by HCMP-HCL-ICP-IFS and CP-HCL-ICP-AFS show no significant difference. Relative standard deviations were 0.6%-1.4% (0.1-0.2 microg x mL(-1), n = 10) for 5 ionic fluorescence lines. Preliminary studies showed that the intensity of ionic fluorescence could be depressed in the presence of K, Al and P.

  6. Alkaline earth metal thioindates

    Energy Technology Data Exchange (ETDEWEB)

    Ivanov-Ehmin, B.N.; Ivlieva, V.I.; Filatenko, L.A.; Zajtsev, B.E.; Kaziev, G.Z.; Sarabiya, M.G.

    1984-08-01

    Alkaline earth metal thioindates of MIn/sub 2/S/sub 4/ composition were synthesized by interaction of alkaline earth metal oxoindates with hydrogen sulfide during heating. Investigation into the compounds by X-ray analysis showed that calcium compound crystallizes in cubic crystal system and strontium and barium compounds in rhombic crystal system. Lattice parameters and the number of formula units were determined. Thioindates of M/sub 3/In/sub 2/S/sub 6/ composition were synthesized, their individuality was shown.

  7. Water Wisdom: 23 Stand-Alone Activities on Water Supply and Water Conservation for High School Students. 2nd Edition.

    Science.gov (United States)

    Massachusetts State Water Resources Authority, Boston.

    This water conservation education program for high schools consists of both stand-alone activities and teacher support materials. Lessons are divided into six broad categories: (1) The Water Cycle; (2) Water and Society; (3) Keeping Water Pure; (4) Visualizing Volumes; (5) The Economics of Water Use; and (6) Domestic Water Conservation. The…

  8. Influence of Mn-dopant on the properties of {alpha}-FeOOH particles precipitated in highly alkaline media

    Energy Technology Data Exchange (ETDEWEB)

    Krehula, Stjepko [Division of Materials Chemistry, Ruder Boskovic Institute, P.O. Box 180, HR-10002 Zagreb (Croatia); Music, Svetozar [Division of Materials Chemistry, Ruder Boskovic Institute, P.O. Box 180, HR-10002 Zagreb (Croatia)]. E-mail: music@irb.hr

    2006-12-21

    The effects of Mn-dopant on the formation of solid solutions {alpha}-(Fe, Mn)OOH in dependence on the initial concentration ratio r = [Mn]/([Mn] + [Fe]), as well as on the size and morphology of the corresponding particles were investigated using Moessbauer and FT-IR spectroscopies, high-resolution scanning electron microscopy (FE SEM) and an energy dispersive X-ray analyser (EDS). The value of the hyperfine magnetic field of 34.9 T, as recorded for the reference {alpha}-FeOOH sample at RT, decreased linearly up to 21.4 T for sample with r = 0.1667. Only a paramagnetic doublet at RT was recorded for sample with r = 0.2308, a ferrite phase was additionally found for r = 0.3333. Fe-OH bending IR bands, {delta} {sub OH} and {gamma} {sub OH}, were influenced by the Mn-substitution as manifested through their gradual shifts. FE SEM micrographs showed a great elongation of the starting acicular particles along the c-axis with an increase in Mn-doping. For r = 0.1667 and 0.2308 star-shaped and dendritic twin {alpha}-(Fe, Mn)OOH particles were observed. The length of these {alpha}-(Fe, Mn)OOH particles decreased, whereas their width increased. The {alpha}-Fe{sub 2}O{sub 3} phase was not detected in any of the samples prepared.

  9. High frequencies of elevated alkaline phosphatase activity and rickets exist in extremely low birth weight infants despite current nutritional support

    Directory of Open Access Journals (Sweden)

    Parker Bruce R

    2009-07-01

    Full Text Available Abstract Background Osteopenia and rickets are common among extremely low birth weight infants (ELBW, Methods We evaluated all ELBW infants admitted to Texas Children's Hospital NICU in 2006 and 2007. Of 211 admissions, we excluded 98 patients who were admitted at >30 days of age or did not survive/stay for >6 weeks. Bone radiographs obtained in 32 infants were reviewed by a radiologist masked to laboratory values. Results In this cohort of 113 infants, P-APA was found to have a significant inverse relationship with BW, gestational age and serum phosphorus. In paired comparisons, P-APA of infants Conclusion Elevation of P-APA >600 IU/L was very common in ELBW infants. BW was significantly inversely related to both P-APA and radiologic rickets. No single value of P-APA was related to radiological findings of rickets. Given the very high risk of osteopenia and rickets among ELBW infants, we recommend consideration of early screening and early mineral supplementation, especially among infants

  10. On electrochemical devices using alkaline polymer electrolytes

    Energy Technology Data Exchange (ETDEWEB)

    Zhuang, L. [Wuhan Univ., Wuhan (China). Dept. of Chemistry

    2010-07-01

    Solid polymer electrolytes (SPEs) enable a compact assembly of fuel cells and electrolyzers, thereby increasing the space-specific conversion efficiency and avoiding electrolyte leakage. The most widely used SPE in proton exchange membrane fuel cells (PEMFC) and chloro-alkali electrolyzers is Nafion. However, this strongly acidic polyelectrolyte allows only noble metals to be used as the catalysts in the electrochemical devices, which poses a problem in terms of price and resource limits. In principle, alkaline polymer electrolytes (APEs) should be used to eliminate the dependence on noble metal catalysts. The general structure of alkaline polymer electrolytes is a positively charged polymer, notably, a polymer chain attached with fixed cations such as quaternary ammonia group, and dissociated anion, OH-, to act as the charge carrier. This presentation described the challenges of developing APEs in terms of the chemical stability of quaternary ammonia group, the mobility of OH-, and high ionic concentration. The authors have been working on developing high-performance APEs since 2001. The most recent APEs were quaternary ammonia polysulfone (QAPS), which were found to be suitable for fuel cell and electrolyzer applications. The ionic conductivity was high and the crosslinked membrane had excellent mechanical strength, enabling operation at 90 degrees C. Non-precious metal catalysts were used in the APEs. For APE-based fuel cells (APEFC), chromium decorated nickel was used as the anode catalyst for hydrogen oxidation, and silver was used as the cathode catalyst for oxygen reduction. The preliminary performance of such an APEFC with non-Pt catalysts was found to be much better than that of traditional water electrolyzers using KOH solutions. 2 refs.

  11. Transient high-frequency ultrasonic water atomization

    Science.gov (United States)

    Barreras, F.; Amaveda, H.; Lozano, A.

    2002-06-01

    An experimental study was performed to improve the understanding of the characteristics of ultrasonic water atomization when excited with waves in the MHz range. In the present experiments, small volumes of water were atomized, observing the temporal evolution of the process. Typical diameters of the resulting droplets are of the order of a few microns. To visualize them, images were acquired with very high magnification. Appropriate lenses were used to enable high resolution at a distance from the flow. Droplet size distributions were also calculated with a Malvern diffractometer. Droplet exit velocity was measured using particle image velocimetry. It was noticeable that, as the remaining liquid mass deposited over the ultrasonic transducer decreased, the atomization characteristics changed, and a second peak of larger droplets appeared in the size distribution function. This phenomenon is related to the change in the curvature of the liquid surface. Although results are not conclusive, it appears that, under the conditions in this study, some observations about droplet formation are better described by cavitation phenomena rather than by the simplified surface wave theory usually invoked to explain these processes.

  12. A Revisit to the Corrosion Inhibition of Aluminum in Aqueous Alkaline Solutions by Water-Soluble Alginates and Pectates as Anionic Polyelectrolyte Inhibitors

    Directory of Open Access Journals (Sweden)

    Refat Hassan

    2013-01-01

    Full Text Available The corrosion behavior of aluminum (Al in alkaline media in presence of some natural polymer inhibitors has been reinvestigated. The inhibition action of the tested inhibitors was found to obey both Langmuir and Freundlich isotherms models. The inhibition efficiency was found to increase with increasing the inhibitors concentration and decrease with increasing the temperature, suggesting physical adsorption mechanism. Factors such as the concentration and geometrical structure of the inhibitor, concentration of the corrosive medium, and temperature affecting the corrosion rates were examined. The kinetic parameters were evaluated, and a suitable corrosion mechanism consistent with the kinetic results obtained is suggested and discussed.

  13. [Advances of alkaline amylase production and applications].

    Science.gov (United States)

    Yang, Haiquan; Liu, Long; Li, Jianghua; Du, Guocheng; Chen, Jian

    2012-04-01

    Alkaline amylase is one of alkaline enzymes with optimum pH in the alkaline range, and it could keep stability and efficiently hydrolyze starch under alkaline conditions. Alkaline amylase finds wide applications in textile, detergent, pharmaceutical, food and other fields. Alkaline amylases could be produced by alkaliphilic microorganisms. In this work, the advances of alkaline amylase production and applications were reviewed.

  14. 阻垢剂在堆浸提金工艺中对碱性水质稳定作用的应用研究%Application of an anti-sludging agent in stabilizing alkaline water quality in heap leaching for gold extraction

    Institute of Scientific and Technical Information of China (English)

    李志远; 胡强; 黄易周; 潘志清; 秦仲杰

    2016-01-01

    The high hardness of ground water used in heap leaching gold extraction process in Changshanhao Gold Mine leads to precipitation which will plug leach pipes,the holes of activated carbon,pumps and so on,subjecting the whole gold extraction process to an adverse situation.To solve that problem,BH-9088 anti-sludging agent is used to stabilize Ca2 +and Mg2+in high alkaline water.The results showed that when the concentration of BH-9088 agent is 10 mg/L,Ca2+and Mg2+in high alkaline water can be effectively stabilized,and it has no interference to cyanidation gold leaching process.The experiment achieved a lot.%长山壕金矿堆浸提金工艺中所用地下水硬度高,进入工艺流程后会产生沉淀,堵塞滴淋管、活性炭孔、溶液泵体等,对整个提金工艺产生很大的不利影响.针对此种情况,采用BH-9088阻垢剂对高碱性水中的Ca2+、Mg2+的稳定作用进行了试验研究.其结果表明:在BH-9088阻垢剂质量浓度为10 mg/L时,即能较好地稳定地下水中的Ca2+、Mg2+,且对氰化提金工艺无干扰,试验效果显著.

  15. Alkaline Capacitors Based on Nitride Nanoparticles

    Science.gov (United States)

    Aldissi, Matt

    2003-01-01

    High-energy-density alkaline electrochemical capacitors based on electrodes made of transition-metal nitride nanoparticles are undergoing development. Transition- metal nitrides (in particular, Fe3N and TiN) offer a desirable combination of high electrical conductivity and electrochemical stability in aqueous alkaline electrolytes like KOH. The high energy densities of these capacitors are attributable mainly to their high capacitance densities, which, in turn, are attributable mainly to the large specific surface areas of the electrode nanoparticles. Capacitors of this type could be useful as energy-storage components in such diverse equipment as digital communication systems, implanted medical devices, computers, portable consumer electronic devices, and electric vehicles.

  16. Carbonic anhydrase 2-like and Na⁺-K⁺-ATPase α gene expression in medaka (Oryzias latipes) under carbonate alkalinity stress.

    Science.gov (United States)

    Yao, Zongli; Lai, Qifang; Hao, Zhuoran; Chen, Ling; Lin, Tingting; Zhou, Kai; Wang, Hui

    2015-12-01

    High carbonate alkalinity is one of the major stress factors for living organisms in saline-alkaline water areas. Acute and chronic effects of carbonate alkalinity on expression of two genes, carbonic anhydrase 2-like (CA2-like) and Na(+)-K(+)-ATPase α subunit (NKA-α) mRNA in medaka (Oryzias latipes) were evaluated to better understand the responses important for coping with a carbonate alkalinity stress. In the acute exposure experiment, the expression of CA2-like and NKA-α mRNA in the gill and kidney of medaka were examined from 0 h to 7 days exposed to 30.4 mM carbonate alkalinity water. Exposure to high carbonate alkalinity resulted in a transitory alkalosis, followed by a transient increase in gill and kidney CA2-like and NKA-α mRNA expression. In the chronic exposure experiment, the expression of these two genes was examined in the gill and kidney at 50 days post-exposure to six different carbonate alkalinity concentrations ranging from 1.5 to 30.4 mM. Gill and kidney CA2-like mRNA levels in 30.4 mM were approximately 10 and 30 times higher than that of the control (1.5 mM), respectively. Less differences were found in NKA-α expression in the 50-days exposure. The results indicate that when transferred to high carbonate alkalinity water, a transitory alkalosis may occur in medaka, followed by compensatory acid-base and ion regulatory responses. Thus, CA2-like and NKA-α are at least two of the important factors that contribute to the regulation of alkalinity stress.

  17. Photo-Fenton oxidation of phenol and organochlorides (2,4-DCP and 2,4-D) in aqueous alkaline medium with high chloride concentration.

    Science.gov (United States)

    Luna, Airton J; Chiavone-Filho, Osvaldo; Machulek, Amilcar; de Moraes, José Ermírio F; Nascimento, Cláudio A O

    2012-11-30

    A highly concentrated aqueous saline-containing solution of phenol, 2,4-dichlorophenoxyacetic acid (2,4-D) and 2,4-dichlorophenol (2,4-DCP) was treated by the photo-Fenton process in a system composed of an annular reactor with a quartz immersion well and a medium-pressure mercury lamp (450 W). The study was conducted under special conditions to minimize the costs of acidification and neutralization, which are usual steps in this type of process. Photochemical reactions were carried out to investigate the influence of some process variables such as the initial concentration of Fe(2+) ([Fe(2+)](0)) from 1.0 up to 2.5 mM, the rate in mmol of H(2)O(2) fed into the system (FH(2)O(2);in) from 3.67 up to 7.33 mmol of H(2)O(2)/min during 120 min of reaction time, and the initial pH (pH(0)) from 3.0 up to 9.0 in the presence and absence of NaCl (60.0 g/L). Although the optimum pH for the photo-Fenton process is about 3.0, this particular system performed well in experimental conditions starting at alkaline and neutral pH. The results obtained here are promising for industrial applications, particularly in view of the high concentration of chloride, a known hydroxyl radical scavenger and the main oxidant present in photo-Fenton processes.

  18. Numerical simulation of high pressure water jet impacting concrete

    Science.gov (United States)

    Liu, Jialiang; Wang, Mengjin; Zhang, Di

    2017-08-01

    High pressure water jet technology is an unconventional concrete crushing technology. In order to reveal the mechanism of high pressure water jet impacting concrete, it built a three-dimensional numerical model of high pressure water jet impacting concrete based on fluid mechanics and damage mechanics. And the numerical model was verified by theoretical analysis and experiments. Based on this model, it studied the stress characteristics in concrete under high pressure water jet impacting at different time, and quantified the damage evolution rules in concrete along the water jet radial direction. The results can provide theoretical basis and guidance for the high pressure water jet crushing concrete technology.

  19. The High-Altitude Water Cherenkov Observatory

    Science.gov (United States)

    Mostafá, Miguel A.

    2014-10-01

    The High-Altitude Water Cherenkov (HAWC) observatory is a large field of view, continuously operated, TeV γ-ray experiment under construction at 4,100 m a.s.l. in Mexico. The HAWC observatory will have an order of magnitude better sensitivity, angular resolution, and background rejection than its predecessor, the Milagro experiment. The improved performance will allow us to detect both the transient and steady emissions, to study the Galactic diffuse emission at TeV energies, and to measure or constrain the TeV spectra of GeV γ-ray sources. In addition, HAWC will be the only ground-based instrument capable of detecting prompt emission from γ-ray bursts above 50 GeV. The HAWC observatory will consist of an array of 300 water Cherenkov detectors (WCDs), each with four photomultiplier tubes. This array is currently under construction on the flanks of the Sierra Negra volcano near the city of Puebla, Mexico. The first 30 WCDs (forming an array approximately the size of Milagro) were deployed in Summer 2012, and 100 WCDs will be taking data by May, 2013. We present in this paper the motivation for constructing the HAWC observatory, the status of the deployment, and the first results from the constantly growing array.

  20. The high-altitude water Cherenkov Observatory

    Energy Technology Data Exchange (ETDEWEB)

    Mostafa, Miguel A., E-mail: miguel@psu.edu [Department of Physics, Colorado State University, Ft Collins, CO (United States)

    2014-07-01

    The High-Altitude Water Cherenkov (HAWC) observatory is a large field of view, continuously operated, TeV γ -ray experiment under construction at 4,100ma.s.l. in Mexico. The HAWC observatory will have an order of magnitude better sensitivity, angular resolution, and background rejection than its predecessor, the Milagro experiment. The improved performance will allow to detect both the transient and steady emissions, to study the Galactic diffuse emission at TeV energies, and to measure or constrain the TeV spectra of GeV γ -ray sources. In addition, HAWC will be the only ground-based instrument capable of detecting prompt emission from γ -ray bursts above 50 GeV. The HAWC observatory will consist of an array of 300 water Cherenkov detectors (WCDs), each with four photomultiplier tubes. This array is currently under construction on the flanks of the Sierra Negra volcano near the city of Puebla, Mexico. The first 30 WCDs (forming an array approximately the size of Milagro) were deployed in Summer 2012, and 100 WCDs will be taking data by May, 2013. We present in this paper the motivation for constructing the HAWC observatory, the status of the deployment, and the first results from the constantly growing array. (author)

  1. The High Altitude Water Cherenkov Observatory

    CERN Document Server

    ,

    2013-01-01

    The High Altitude Water Cherenkov (HAWC) observatory is a large field of view, continuously operated, TeV gamma-ray experiment under construction at 4,100 m a.s.l. in Mexico. The HAWC observatory will have an order of magnitude better sensitivity, angular resolution, and background rejection than its predecessor, the Milagro experiment. The improved performance will allow us to detect both transient and steady emissions, to study the Galactic diffuse emission at TeV energies, and to measure or constrain the TeV spectra of GeV gamma-ray sources. In addition, HAWC will be the only ground-based instrument capable of detecting prompt emission from gamma-ray bursts above 50 GeV. The HAWC observatory will consist of an array of 300 water Cherenkov detectors (WCDs), each with four photomultiplier tubes. This array is currently under construction on the flanks of the Sierra Negra volcano near the city of Puebla, Mexico. The first thirty WCDs (forming an array approximately the size of Milagro) were deployed in Summer...

  2. Increased river alkalinization in the Eastern U.S

    Science.gov (United States)

    Kaushal, S.; Likens, G. E.; Utz, R.; Pace, M.; Grese, M.; Yepsen, M.

    2013-12-01

    The interaction between human activities and watershed geology is accelerating long-term changes in the carbon cycle of rivers. We evaluated changes in bicarbonate alkalinity, a product of chemical weathering, and tested for long-term trends at 97 sites in the eastern United States draining over 260,000 km2. We observed statistically significant increasing trends in alkalinity at 62 of the 97 sites, while remaining sites exhibited no significant decreasing trends. Over 50% of study sites also had statistically significant increasing trends in concentrations of calcium (another product of chemical weathering) where data were available. River alkalinization rates were significantly related to watershed carbonate lithology, acid deposition, and topography. These 3 variables explained ~40% of variation in river alkalinization rates. The strongest predictor of river alkalinization rates was carbonate lithology. The most rapid rates of river alkalinization occurred at sites with highest inputs of acid deposition and highest elevation. The rise of alkalinity in many rivers throughout the eastern U.S. suggests human-accelerated chemical weathering, in addition to previously documented impacts of mining and land use. Increased river alkalinization has major environmental implications including impacts on water hardness and salinization of drinking water, alterations of air-water exchange of CO2, coastal ocean acidification, and the influence of bicarbonate availability on primary production.

  3. Increased river alkalinization in the Eastern U.S.

    Science.gov (United States)

    Kaushal, Sujay S; Likens, Gene E; Utz, Ryan M; Pace, Michael L; Grese, Melissa; Yepsen, Metthea

    2013-09-17

    The interaction between human activities and watershed geology is accelerating long-term changes in the carbon cycle of rivers. We evaluated changes in bicarbonate alkalinity, a product of chemical weathering, and tested for long-term trends at 97 sites in the eastern United States draining over 260,000 km(2). We observed statistically significant increasing trends in alkalinity at 62 of the 97 sites, while remaining sites exhibited no significant decreasing trends. Over 50% of study sites also had statistically significant increasing trends in concentrations of calcium (another product of chemical weathering) where data were available. River alkalinization rates were significantly related to watershed carbonate lithology, acid deposition, and topography. These three variables explained ~40% of variation in river alkalinization rates. The strongest predictor of river alkalinization rates was carbonate lithology. The most rapid rates of river alkalinization occurred at sites with highest inputs of acid deposition and highest elevation. The rise of alkalinity in many rivers throughout the Eastern U.S. suggests human-accelerated chemical weathering, in addition to previously documented impacts of mining and land use. Increased river alkalinization has major environmental implications including impacts on water hardness and salinization of drinking water, alterations of air-water exchange of CO2, coastal ocean acidification, and the influence of bicarbonate availability on primary production.

  4. Study on water cooled high conversion reactor

    Energy Technology Data Exchange (ETDEWEB)

    Ochiai, Masaaki [Japan Atomic Energy Research Inst., Tokai, Ibaraki (Japan). Tokai Research Establishment

    1999-12-01

    As a part of study on advanced reactors for the future, conceptual design of high conversion water cooled reactors is being studied, aiming at the contribution to nuclear fuel cycle by the LWR technology, since the utilization of LWRs will extend over a long period of time . We are studying on the reactor core concepts for BWR and PWR reactor systems. As for BWR system, three types of reactor cores are investigating for three different design goals; long operation period, high conversion ratio and high applicability for the existing BWR system. In all the cases, we have obtained a fair prospect of a large core concept with a capacity of 1,000 MWe class having negative void reactivity coefficient. This study is a part of JAERI-JAPCO (Japan Atomic Power Company) cooperative studies. Various kinds of conceptual designs will be created until the end of FY 1999. The designs will be checked and reviewed at that time, then experimental studies on the realization of the concepts will start with further design works from FY 2000. (author)

  5. Fullerene-C60 and crown ether doped on C60 sensors for high sensitive detection of alkali and alkaline earth cations

    Science.gov (United States)

    Zaghmarzi, Fatemeh Alipour; Zahedi, Mansour; Mola, Adeleh; Abedini, Saboora; Arshadi, Sattar; Ahmadzadeh, Saeed; Etminan, Nazanin; Younesi, Omran; Rahmanifar, Elham; Yoosefian, Mehdi

    2017-03-01

    Fullerenes are effective acceptor components with high electron affinity for charge transfer. The significant influences of chemical adsorption of the cations on the electrical sensitivity of pristine C60 and 15-(C2H4O)5/C60 nanocages could be the basis of new generation of electronic sensor design. The density functional theory calculation for alkali and alkaline earth cations detection by pristine C60 and 15-(C2H4O)5/C60 nanocages are considered at B3LYP level of theory with 6-31 G(d) basis set. The quantum theory of atoms in molecules analysis have been performed to understand the nature of intermolecular interactions between the cations and nanocages. Also, the natural bond orbital analysis have been performed to assess the intermolecular interactions in detail. Furthermore, the frontier molecular orbital, energy gap, work function, electronegativity, number of transferred electron (∆N), dipole moment as well as the related chemical hardness and softness are investigated and calculated in this study. The results show that the adsorption of cations (M=Na+, K+, Mg2+ and Ca2+) are exothermic and the binding energy in pristine C60 nanocage and 15-(C2H4O)5/C60 increases with respect to the cations charge. The results also denote a decrease in the energy gap and an increase in the electrical conductivity upon the adsorption process. In order to validate the obtained results, the density of state calculations are employed and presented in the end as well.

  6. Two 3D structured Co-Ni bimetallic oxides as cathode catalysts for high-performance alkaline direct methanol fuel cells

    Science.gov (United States)

    Liu, Yan; Shu, Chengyong; Fang, Yuan; Chen, Yuanzhen; Liu, Yongning

    2017-09-01

    Two NiCo2O4 bimetallic oxides were synthesized via a facile hydrothermal method. SEM and TEM observations show that these materials have three-dimensional (3D) dandelion-like (DL) and flower-like (FL) morphologies. Their large specific surface areas (90.68 and 19.8 m2·g-1) and porous structures provide many active sites and effective transport pathways for the oxygen reduction reaction (ORR). Electrochemical measurements with a rotating ring-disc electrode (RRDE) indicate that the electron transfer numbers of the NiCo2O4-DL and NiCo2O4-FL catalysts for ORR in an alkaline solution are 3.97 and 3.91, respectively. Fuel cells were assembled with the bimetallic oxides, PtRu/C and a polymer fiber membrane (PFM) as cathode catalysts, anode catalyst and electrolyte film, respectively. For NiCo2O4-DL, the peak power density reaches up to 73.5 mW·cm-2 at 26 °C, which is the highest room-temperature value reported to date. The high catalytic activity of NiCo2O4 is mainly attributed to the presence of many Co3+ cations that directly donate electrons to O2 to reduce it via a more efficient and effective route. Furthermore, the catalytic performance of NiCo2O4-DL is superior to that of NiCo2O4-FL because it has a higher specific surface area and is less crystalline.

  7. 46 CFR 28.250 - High water alarms.

    Science.gov (United States)

    2010-10-01

    ... 46 Shipping 1 2010-10-01 2010-10-01 false High water alarms. 28.250 Section 28.250 Shipping COAST... Individuals On Board, or for Fish Tender Vessels Engaged in the Aleutian Trade § 28.250 High water alarms. On... operating station to indicate high water level in each of the following normally unmanned spaces: (a)...

  8. The Anfeg post-collisional Pan-African high-K calc-alkaline batholith (Central Hoggar, Algeria), result of the LATEA microcontinent metacratonization

    Science.gov (United States)

    Acef, Kaissa; Liégeois, Jean Paul; Ouabadi, Aziouz; Latouche, Louis

    2003-10-01

    The Anfeg batholith (or composite laccolith) occupies a large surface (2000 km 2) at the northern tip of the Laouni terrane, just south of Tamanrasset in Hoggar. It is granodioritic to granitic in composition and comprises abundant enclaves that are either mafic microgranular enclaves (MME) or gneissic xenoliths. It intruded an Eburnian (≈2 Ga) high-grade basement belonging to the LATEA metacraton at approximately 608 Ma (recalculated from the U-Pb dating of [Tectonics 5 (1986) 955]) and cooled at approximately 4 kbar, with a temperature of about 750 °C. This emplacement occurred mainly along subhorizontal thrust planes related to Pan-African subvertical mega-shear zones close to the attachment zone of a strike-slip partitioned transpression system. Although affected by some LILE mobility, the Anfeg batholith can be ascribed to a high-K calc-alkaline suite but characterized by low heavy REE contents and high LREE/HREE ratios. The MME belong to the Anfeg magmatic trend while some xenoliths belong to Neoproterozoic island arc rocks. The Anfeg batholith defines a Nd-Sr isotopic initial ratios trend ( ɛNd/( 87Sr/ 86Sr) i from -2.8/0.7068 to -11.8/0.7111) pointing to a mixing between a depleted mantle and an old Rb-depleted granulitic lower crust. Both sources have been identified within LATEA and elsewhere in the Tuareg shield ( ɛNd/ 87Sr/ 86Sr) i of +6.2/0.7028 for the depleted mantle, -22/0.708 for the old lower crust. The model proposed relates the above geochemical features to a lithospheric delamination along the subvertical mega-shear zones that dissected the rigid LATEA former passive margin without major crustal thickening (metacratonization) during the general northward tectonic escape of the Tuareg terranes, a consequence of the collision with the West African craton. This delamination allowed the uprise of the asthenosphere. In turn, this induced the melting of the asthenosphere by adiabatic pressure release and of the old felsic and mafic lower crust

  9. Variations of Water-Soluble Carbohydrate Contents in Different Age Class Modules of Leymus chinensis Populations in Sandy and Saline-Alkaline Soil on the Songnen Plains of China

    Institute of Scientific and Technical Information of China (English)

    Xue-Mei Ding; Yun-Fei Yang

    2007-01-01

    Leymus chinensis (Trin.) Tzvel. is a rhizomatous pexennial herbage of Gramineae. Reproduction is mainly by vegetative reproduction. Tillering nodes and rhizomes of L. chinensis serve as organs for both vegetative reproduction and nutrient storage. Water-soluble carbohydrate (WSC) contents were measured in tillering nodes, nodes and internodes of rhizomes of different age classes of L. chinensis populations at three development stages, namely the dough ripe stage, the vegetative growth stage after full ripeness, and the withering stage, in two habitats:sandy soil and saline-alkaline soil. The results showed that WSC content in tillering nodes of the three age classes of L. chinensis were all markedly decreased with increasing age in both sandy soil and saline-alkaline soil. A similar trend of changes in WSC contents was observed in the nodes and internodes of rhizomes in different age classes in both habitats. The highest WSC contents were in 2-age-class nodes and internodes of rhizomes, followed by those in the 1 age class, with the lowest WSC contents found in 3-age-class nodes and internodes of rhizomes at the dough ripe and vegetative growth stages after full ripening. In turn, WSC contents decreased with increasing age at the withering stage in both habitats. The WSC content in each age class of internode was higher than that in the node of rhizome at three development stages In both habitats.

  10. Combined wet oxidation and alkaline hydrolysis of polyvinylchloride

    DEFF Research Database (Denmark)

    Sørensen, E.; Bjerre, A.B.

    1992-01-01

    In view of the widespread aversion to burning polyvinylchloride (PVC) together with municipal waste, we have attempted an alternative approach to its decomposition. This paper describes a combined wet oxidation/alkaline hydrolysis yielding water soluble, biodegradable products. Experiments were...

  11. Alkaline broadening in Stars

    CERN Document Server

    De Kertanguy, A

    2015-01-01

    Giving new insight for line broadening theory for atoms with more structure than hydrogen in most stars. Using symbolic software to build precise wave functions corrected for ds;dp quantum defects. The profiles obtained with that approach, have peculiar trends, narrower than hydrogen, all quantum defects used are taken from atomic database topbase. Illustration of stronger effects of ions and electrons on the alkaline profiles, than neutral-neutral collision mechanism. Keywords : Stars: fundamental parameters - Atomic processes - Line: profiles.

  12. Surfactant-enhanced alkaline flooding: Buffering at intermediate alkaline pH

    Energy Technology Data Exchange (ETDEWEB)

    Rudin, J.; Wasan, D.T. (Illinois Inst. of Tech., Chicago, IL (United States))

    1993-11-01

    The alkaline flooding process involves injecting alkaline agents into the reservoir to produce more oil than is produced through conventional waterflooding. The interaction of the alkali in the flood water with the naturally occurring acids in the reservoir oil results in in-situ formation of soaps, which are partially responsible for lowering IFT and improving oil recovery. The extent to which IFT is lowered depends on the specific oil and injection water properties. Numerous investigators have attempted to clarify the relationship between system chemical composition and IFT. An experimental investigation of buffered alkaline flooding system chemistry was undertaken to determine the influence of various species present on interfacial tension (IFT) as a function of pH and ionic strength. IFT was found to go through an ultralow minimum in certain pH ranges. This synergism results from simultaneous adsorption of un-ionized and ionized acid species on the interface.

  13. Crystallization conditions of porphyritic high-K calc-alkaline granitoids in the extreme northeastern Borborema Province, NE Brazil, and geodynamic implications

    Science.gov (United States)

    Campos, Benedita Cleide Souza; Vilalva, Frederico Castro Jobim; Nascimento, Marcos Antônio Leite do; Galindo, Antônio Carlos

    2016-10-01

    An integrated textural and chemical study on amphibole, biotite, plagioclase, titanite, epidote, and magnetite was conducted in order to estimate crystallization conditions, along with possible geodynamic implications, for six Ediacaran porphyritic high-K calc-alkaline granite plutons (Monte das Gameleiras, Barcelona, Acari, Caraúbas, Tourão, and Catolé do Rocha) intrusive into Archean to Paleoproterozoic rocks of the São José do Campestre (SJCD) and Rio Piranhas-Seridó (RPSD) domains, northern Borborema Province. The studied rocks include mainly porphyritic leucocratic monzogranites, as well as quartz-monzonites and granodiorites. Textures are marked by K-feldspar megacrysts (5-15 cm long) in a fine-to medium-grained matrix composed of quartz, plagioclase, amphibole, biotite, as well as titanite, epidote, Fesbnd Ti oxides, allanite, apatite, and zircon as accessory minerals. Amphibole, biotite and titanite share similar compositional variations defined by increasing Al and Fe, and decreasing Mg contents from the plutons emplaced into the SJCP (Monte das Gameleiras and Barcelona) towards those in the RPSD (Acari, Caraúbas, Tourão, and Catolé do Rocha). Estimated intensive crystallization parameters reveal a weak westward range of increasing depth of emplacement, pressure and temperature in the study area. The SJCD plutons (to the east) crystallized at shallower crustal depths (14-21 km), under slightly lower pressure (3.8-5.5 kbar) and temperature (701-718 °C) intervals, and high to moderate oxygen fugacity conditions (+0.8 plutons (to the west) were emplaced at slightly deeper depths (18-23 km), under higher, yet variable pressures (4.8-6.2 kbar), temperatures (723-776 °C), and moderate to low oxygen fugacity conditions (-1.0 < ΔFQM < +1.8). These results reinforce the contrasts between the tectono-strutuctural domains of São José do Campestre and Rio Piranhas-Seridó in the northern Borborema Province.

  14. Low serum alkaline phosphatase activity in Wilson's disease.

    Science.gov (United States)

    Shaver, W A; Bhatt, H; Combes, B

    1986-01-01

    Low values for serum alkaline phosphatase activity were observed early in the course of two patients with Wilson's disease presenting with the combination of severe liver disease and Coombs' negative acute hemolytic anemia. A review of other cases of Wilson's disease revealed that 11 of 12 patients presenting with hemolytic anemia had values for serum alkaline phosphatase less than their respective sex- and age-adjusted mean values; in eight, serum alkaline phosphatase activity was less than the lower value for the normal range of the test. Low values for serum alkaline phosphatase were much less common in Wilson's disease patients with more chronic forms of presentation. Copper added in high concentration to serum in vitro did not have an important effect on serum alkaline phosphatase activity. The mechanism responsible for the decrease in serum alkaline phosphatase activity in patients is uncertain.

  15. Some durability aspects of hybrid alkaline cements

    Directory of Open Access Journals (Sweden)

    Donatello S.

    2014-04-01

    Full Text Available Blended cements that contain a high content of fly ash and a low content of Portland cement typically suffer from low early strength development and long setting times. Recently, one method of overcoming these problems has been to use an alkali activator to enhance the reactivity of fly ash particles at early ages. Such cements can be grouped under the generic term “hybrid alkaline cements”, where both cement clinker and fly ash, encouraged by the presence of alkalis, are expected to contribute to cementitious gel formation. The work presented here examines some of the durability aspects of high fly ash content hybrid alkaline cement. Specifically, the aspects investigated were: exposure at high temperatures (up to 1000°C, resistance to immersion in aggressive solutions and susceptibility to the alkali aggregate reaction. All tests were repeated with a commercially available sulfate resistant Portland cement for comparison. When exposed to high temperatures, the hybrid alkaline cement showed strikingly different behaviour compared to the control Portland cement, showing fewer micro-cracks and maintaining residual compressive strengths at least equal to original strengths. Beyond 700°C, the hybrid alkaline cement began to sinter, which resulted in shrinkage of around 5% and a 100% increase in residual compressive strengths. No such sintering event was noted in the control Portland cement, which showed a drastic loss in residual compressive strengths upon heating. In immersion tests, the hybrid alkaline cement possessed excellent resistance to sulfate and seawater attack, similar to the control sulfate resistant cement. Both cements were however severely degraded by immersion in 0.1M HCl for 90 days. Both binders complied with the accelerated alkali-aggregate test but when this test was extended, the hybrid alkaline binder showed much greater dimensional stability. Possible reasons for the differences in durability behaviour in both cements

  16. A Chronoamperometric Screen Printed Carbon Biosensor Based on Alkaline Phosphatase Inhibition for W(VI) Determination in Water, Using 2-Phospho-l-Ascorbic Acid Trisodium Salt as a Substrate

    Science.gov (United States)

    Alvarado-Gámez, Ana Lorena; Alonso-Lomillo, María Asunción; Domínguez-Renedo, Olga; Arcos-Martínez, María Julia

    2015-01-01

    This paper presents a chronoamperometric method to determine tungsten in water using screen-printed carbon electrodes modified with gold nanoparticles and cross linked alkaline phosphatase immobilized in the working electrode. Enzymatic activity over 2-phospho-l-ascorbic acid trisodium salt, used as substrate, was affected by tungsten ions, which resulted in a decrease of chronoamperometric current, when a potential of 200 mV was applied on 10 mM of substrate in a Tris HCl buffer pH 8.00 and 0.36 M of KCl. Calibration curves for the electrochemical method validation, give a reproducibility of 5.2% (n = 3), a repeatability of 9.4% (n = 3) and a detection limit of 0.29 ± 0.01 μM. Enriched tap water, purified laboratory water and bottled drinking water, with a certified tungsten reference solution traceable to NIST, gave a recovery of 97.1%, 99.1% and 99.1% respectively (n = 4 in each case) and a dynamic range from 0.6 to 30 μM. This study was performed by means of a Lineweaver–Burk plot, showing a mixed kinetic inhibition. PMID:25621602

  17. A chronoamperometric screen printed carbon biosensor based on alkaline phosphatase inhibition for W(IV) determination in water, using 2-phospho-L-ascorbic acid trisodium salt as a substrate.

    Science.gov (United States)

    Alvarado-Gámez, Ana Lorena; Alonso-Lomillo, María Asunción; Domínguez-Renedo, Olga; Arcos-Martínez, María Julia

    2015-01-22

    This paper presents a chronoamperometric method to determine tungsten in water using screen-printed carbon electrodes modified with gold nanoparticles and cross linked alkaline phosphatase immobilized in the working electrode. Enzymatic activity over 2-phospho-l-ascorbic acid trisodium salt, used as substrate, was affected by tungsten ions, which resulted in a decrease of chronoamperometric current, when a potential of 200 mV was applied on 10 mM of substrate in a Tris HCl buffer pH 8.00 and 0.36 M of KCl. Calibration curves for the electrochemical method validation, give a reproducibility of 5.2% (n = 3), a repeatability of 9.4% (n = 3) and a detection limit of 0.29 ± 0.01 µM. Enriched tap water, purified laboratory water and bottled drinking water, with a certified tungsten reference solution traceable to NIST, gave a recovery of 97.1%, 99.1% and 99.1% respectively (n = 4 in each case) and a dynamic range from 0.6 to 30 µM. This study was performed by means of a Lineweaver-Burk plot, showing a mixed kinetic inhibition.

  18. A Chronoamperometric Screen Printed Carbon Biosensor Based on Alkaline Phosphatase Inhibition for W(VI Determination in Water, Using 2-Phospho-l-Ascorbic Acid Trisodium Salt as a Substrate

    Directory of Open Access Journals (Sweden)

    Ana Lorena Alvarado-Gámez

    2015-01-01

    Full Text Available This paper presents a chronoamperometric method to determine tungsten in water using screen-printed carbon electrodes modified with gold nanoparticles and cross linked alkaline phosphatase immobilized in the working electrode. Enzymatic activity over 2-phospho-l-ascorbic acid trisodium salt, used as substrate, was affected by tungsten ions, which resulted in a decrease of chronoamperometric current, when a potential of 200 mV was applied on 10 mM of substrate in a Tris HCl buffer pH 8.00 and 0.36 M of KCl. Calibration curves for the electrochemical method validation, give a reproducibility of 5.2% (n = 3, a repeatability of 9.4% (n = 3 and a detection limit of 0.29 ± 0.01 µM. Enriched tap water, purified laboratory water and bottled drinking water, with a certified tungsten reference solution traceable to NIST, gave a recovery of 97.1%, 99.1% and 99.1% respectively (n = 4 in each case and a dynamic range from 0.6 to 30 µM. This study was performed by means of a Lineweaver–Burk plot, showing a mixed kinetic inhibition.

  19. Alkalinity-regulating effect of immobilized microorganisms on indoor high-density culture of Litopenaeus vannamei%碱度调节对凡纳滨对虾室内高密度养殖固定化微生物处理效果的影响

    Institute of Scientific and Technical Information of China (English)

    王大鹏; 何安尤; 韩耀全; 施军; 陈晓汉

    2014-01-01

    Alkalinity control in an indoor, concrete pond, zero water exchange high-density culture system for Litope-naeus vannamei, using bio-filler microbial immobilization and addition of sodium bicarbonate (NaHCO3), was tested at various levels. Level T1 involved treatment with 130 mg(CaCO3)/L, T2 was treated with 100 mg(CaCO3)/L, T3 was treated with 70 mg(CaCO3)/L, and the T4 treatment group was not adjusted and acted as the control. There were three replicates for each treatment group. The number of microorganisms in the water and biological filler layers were re-corded regularly during the breeding cycle, and water quality parameters and shrimp growth traits parameters were monitored. The results show that the T1 and T2 treatments had a significantly better effect on the total number of bacte-ria in the water and biological filler layers plus the nitrogen cycle. In T1 and T2, the number of bacteria was signifi-cantly higher than in the T3 and T4 treatment groups (P<0.05), while the concentration of total nitrogen and inorganic nitrogen, shrimp weight gain, feed conversion rate, and other parameters were also significantly better than in the T3 and T4 treatment group (P<0.05). The higher the alkalinity was maintained, the shorter the time interval of adjustment in adding sodium bicarbonate. In the late breeding period, the high alkalinity of the water and filler layer and thus total number of bacteria and nitrogen cycle bacteria were significantly higher than the number in low-alkalinity water. This trend was more obvious with increasing water depth. The mechanism of the ecological impact of alkalinity in shrimp farming mainly affects the number of microbes and microbial decomposition efficiency. The growth of microorganisms and increase in decomposition efficiency reduces ammonia nitrogen and inorganic nitrogen concentrations, and thereby maintains a better growth environment for shrimp and thus the growth of shrimp. In conclusion, in a high-density shrimp farming

  20. Recent Alkaline Lakes: Clues to Understanding the Evolution of Early Planetary Alkaline Oceans and Biogenesis

    Science.gov (United States)

    Kempe, S.; Hartmann, J.; Kazmierczak, J.

    2008-09-01

    Abstract New models suggest that terrestrial weathering consumes 0.26GtC/a (72% silicate-, 28% carbonateweathering), equivalent to a loss of one atmospheric C content every 3700a. Rapid weathering leads in volcanic areas to alkaline conditions, illustrated by the crater lake of Niuafo`ou/Tonga and Lake Van/Turkey, the largest soda lake on Earth. Alkaline conditions cause high CaCO3 supersaturation, permineralization of algal mats and growth of stromatolites. Alkaline conditions can nearly depress free [Ca2+] to levels necessary for proteins to function. Therefore early oceans on Earth (and possibly on Mars) should have been alkaline (i.e. "Soda Oceans"). Recent findings of MgSO4 in top soils on Mars may be misleading about the early history of martian oceans.

  1. Flint Water Crisis Taking High Toll on Health, Productivity

    Science.gov (United States)

    ... medlineplus.gov/news/fullstory_160307.html Flint Water Crisis Taking High Toll on Health, Productivity Michigan city ... MONDAY, Aug. 8, 2016 (HealthDay News) -- The water crisis in Flint, Mich., has cost $395 million in ...

  2. Decomposition of water into highly combustible hydroxyl gas used in ...

    African Journals Online (AJOL)

    Decomposition of water into highly combustible hydroxyl gas used in internal ... of alternative sources of energy that produce less amounts of carbon dioxide. ... The by-product obtained from combustion of this gas is water vapour and oxygen ...

  3. High resolution full-spectrum water Raman lidar

    Institute of Scientific and Technical Information of China (English)

    LIU FuChao; YI Fan; JIA JingYu; ZHANG YunPeng; ZHANG ShaoDong; YU ChangMing; TAN Ying

    2012-01-01

    Knowledge of the temporal-spatial distribution of water content in atmosphere and water phase change in cloud is important for atmospheric study.For this purpose,we have developed a high resolution full-spectrum water Raman lidar that can collect Raman signals from ice,water droplets and water vapor simultaneously.A double-grating polychromator and a 32-channel photomultiplier-tube detector are used to obtain a spectral resolution of ~0.19 nm in the full Raman spectrum range of water.Preliminary observations present the water Raman spectrum characteristics of both the mixed-phase cloud and humid air under cloudless condition.

  4. Characterization of Cross-linked Alkaline Lignin/Poly (Vinyl Alcohol Film with a Formaldehyde Cross-linker

    Directory of Open Access Journals (Sweden)

    Ling Su

    2014-06-01

    Full Text Available On the basis of previous experiments, industrial alkaline lignin/poly (vinyl alcohol (PVOH cross-linked films, industrial alkaline lignin/poly (vinyl alcohol blend films, and neat poly (vinyl alcohol films were prepared by casting. The films were investigated by Fourier transform infra-red spectroscopy (FTIR, X-ray diffraction (XRD, thermogravimetry analysis (TGA, and dynamic mechanical analysis (DMA. The water contact angles for the three kinds of films were studied as well. The crosslinking reaction between alkaline lignin and PVOH was strong, which was attributed to the high hydrolysis degree of PVOH and the high reactivity of formaldehyde. Compared with the neat PVOH film, the crystallinity of the cross-linked film decreased slightly; the thermal stability of the cross-linked film was higher; DMA analysis showed that the Tg and the tanδ magnitude of the alkaline lignin/PVOH reaction film both decreased slightly. Lignin and the cross-linking reaction both improved the water resistance of films. Therefore, this research has provided a detailed analysis of the characterization of the films while exploring the potential of direct usage of industrial alkaline lignin in polymer materials.

  5. High external pH enables more efficient secretion of alkaline α-amylase AmyK38 by Bacillus subtilis

    Directory of Open Access Journals (Sweden)

    Manabe Kenji

    2012-06-01

    Full Text Available Abstract Background Bacillus subtilis genome-reduced strain MGB874 exhibits enhanced production of exogenous extracellular alkaline cellulase Egl-237 and subtilisin-like alkaline protease M-protease. Here, we investigated the suitability of strain MGB874 for the production of α-amylase, which was anticipated to provoke secretion stress responses involving the CssRS (Control secretion stress Regulator and Sensor system. Results Compared to wild-type strain 168, the production of a novel alkaline α-amylase, AmyK38, was severely decreased in strain MGB874 and higher secretion stress responses were also induced. Genetic analyses revealed that these phenomena were attributable to the decreased pH of growth medium as a result of the lowered expression of rocG, encoding glutamate dehydrogenase, whose activity leads to NH3 production. Notably, in both the genome-reduced and wild-type strains, an up-shift of the external pH by the addition of an alkaline solution improved AmyK38 production, which was associated with alleviation of the secretion stress response. These results suggest that the optimal external pH for the secretion of AmyK38 is higher than the typical external pH of growth medium used to culture B. subtilis. Under controlled pH conditions, the highest production level (1.08 g l-1 of AmyK38 was obtained using strain MGB874. Conclusions We demonstrated for the first time that RocG is an important factor for secretory enzyme production in B. subtilis through its role in preventing acidification of the growth medium. As expected, a higher external pH enabled a more efficient secretion of the alkaline α-amylase AmyK38 in B. subtilis. Under controlled pH conditions, the reduced-genome strain MGB874 was demonstrated to be a beneficial host for the production of AmyK38.

  6. TiO2-NT electrodes modified with Ag and diamond like carbon (DLC) for hydrogen production by alkaline water electrolysis

    Science.gov (United States)

    Baran, Evrim; Baz, Zeynep; Esen, Ramazan; Yazici Devrim, Birgül

    2017-10-01

    In present work, the two-step anodization technique was applied for synthesis of TiO2 nanotube (NT). Silver and diamond like carbon (DLC) were coated on the surface of as prepared TiO2-NT using chemical reduction method and MW ECR plasma system. The morphology, composition and structure of the electrodes were examined by field emission scanning electron microscopy (FE-SEM), energy dispersive X-ray spectroscopy (EDX) and X-ray diffraction (XRD). The results showed that Ag nanoparticles, having size in the range of 48-115 nm, are evenly distributed on the top, inside and outside surface of TiO2-NT and when DLC was coated on the surface of TiO2-NT and TiO2-NT-Ag, the top of nanotubes were partially open and the pore diameter of hexagonal structure decreased from 165 nm to of 38-80 nm. On the other hand, the microhardness test and contact angle measurements revealed that additions of Ag and diamond like carbon have a positive effect on the mechanical properties of TiO2-NT film. The electrocatalytic properties of the electrodes towards the hydrogen evolution reaction (HER) were investigated by the electrochemical measurements recorded in 1 M KOH solution. In addition, long-term durability of electrodes towards HER and the energy consumption of alkaline electrolysis were investigated. The energy requirement showed that while the deposition of silver provides approximately 14.95% savings of the energy consumption, the DLC coating causes increase in energy consumption.

  7. 低硬、低碱度水的再矿化对管道腐蚀的控制效果%Remineralization of Low Hardness and Low Alkalinity Water for Pipeline Corrosion Control

    Institute of Scientific and Technical Information of China (English)

    许仕荣; 赵伟; 王长平; 徐洪福

    2012-01-01

    The efficiencies of two remineralization alternatives for controlling pipeline corrosion caused by water with low hardness and low alkalinity in the Shenzhen area were investigated. One alternative dosed lime to raise the pH, and the other dosed lime and CO2. Dosing lime alone did not result in a significant improvement in the water' s corrosiveness, but dosing lime with CO2 was effective in controlling pipeline corrosion. The corrosion rates on A3 steel, galvanized steel, grey and nodular cast irons, compared to the rates in non-remineralized water, were reduced by 73. 3% , 70. 0% , 59. 7% and 67. 9% respectively when the alkalinity of remineralized water increased to 80 mg/L as CaCO3. The content of calcium carbonate in the corrosion products was more than 60% , and a calcium carbonate layer was formed on the pipe interior to protect against corrosion.%以深圳市的低硬、低碱度水为研究对象,考察单独投加石灰或CO2/石灰联用的两种再矿化工艺对管道腐蚀的控制效果.结果表明:当单独投加石灰提高水样的pH值时,水的腐蚀性并未有明显改变,而CO2/石灰再矿化工艺控制腐蚀的效果较明显.与未矿化的出厂水相比,当再矿化后水的碱度提高到80 mg/L(以CaC03计)时,对A3钢、镀锌钢、灰口铸铁和球墨铸铁的腐蚀速率分别降低了73.3%、70.0%、59.7%和67.9%,并且此时腐蚀产物中碳酸钙的含量超过了60%,能很好地形成碳酸钙保护膜以抑制管道腐蚀.

  8. Fractionation of organic substances from the South African Eucalyptus grandis biomass by a combination of hot water and mild alkaline treatments

    CSIR Research Space (South Africa)

    Johakimu, Jonas K

    2015-09-01

    Full Text Available An alternative way of fractionating lignocellulose biomass into its individual components, hemicelluloses, lignin and cellulose, was investigated. South African Eucalyptus grandis wood chips were fractionated using a combination of hot water...

  9. Research on Treatment of High Hardness and Alkalinity Wastewater by Electrosorption Technology%电吸附技术处理高硬度高碱度废水的中试研究

    Institute of Scientific and Technical Information of China (English)

    孙英战; 谢海燕; 石文忠; 阿力木江·斯拉木; 史殿彬; 刘丽青

    2012-01-01

    以乌鲁木齐高新区北区再生水厂的出水作为原水,在不同重碳酸盐碱度(HCO-3)和不同总硬度的进水条件下,研究了电吸附设备对TDS、氯离子、总硬度和HCO-3的去除效果.结果表明,在进水HCO-3浓度为80 mg/L,总硬度分别为340,770和1200 mg/L条件下,电吸附设备连续运行6个周期,除HCO-3外,设备对TDS、氯离子、总硬度的去除率较为稳定,当进水HCO-3浓度增加到440 mg/L时,4项指标去除率均呈现逐渐下降趋势,且总硬度越高,TDS、氯化物和HCO-3的去除率下降越明显.分析认为电吸附设备在高重碳酸盐碱度进水条件下运行时,HCO-3与钙等硬度离子相互作用,导致电极板结垢,从而影了设备的脱盐效果.%This research was conducted to investigate the removal effect of eletrosorption equipment of TDS, chloridion, total hardness and HCO3- .under different conditions of bicarbonate alkalinity and total hardness by using the influent from reclaimed waterworks in the north of high and new tech zone in Urumqi City as raw water. The result indicated that when the concentration of influent HCO3- was 80 mg/L, the total hardness was respectively 340,770 and 1 200 mg/L,electrosorption equipment continuously were operated in 6 cycles,except for HCO3-,removal rate of TDS,chloride and total hardness were more stable. When the influent HCOT concentration increasd by 440 mg/L,the removal rate of the above four were decreased gradually,the higher the total hardness,the more obviously the removal rate of TDS,chloride and HCO3- increased. It was analyzed that when the electrosorption equipment was operated under the conditions of influent of high bicarbornate alkalinity, HCCV and calcium and other hardness ions will act on one another,which resulted in scaling of eletrode plate,thus affecting the desalting effect of electrosorption e-quipment.

  10. Diode Pumped Alkaline Laser System: A High Powered, Low SWaP Directed Energy Option for Ballistic Missile Defense High-Level Summary - April 2017

    Energy Technology Data Exchange (ETDEWEB)

    Wisoff, P. J. [Lawrence Livermore National Lab. (LLNL), Livermore, CA (United States)

    2017-04-28

    The Diode-Pumped Alkali Laser (DPAL) system is an R&D effort funded by the Missile Defense Agency (MDA) underway at Lawrence Livermore National Laboratory (LLNL). MDA has described the characteristics needed for a Boost Phase directed energy (DE) weapon to work against ICBM-class threat missiles. In terms of the platform, the mission will require a high altitude Unmanned Aerial Vehicle (UAV) that can fly in the “quiet” stratosphere and display long endurance – i.e., days on station. In terms of the laser, MDA needs a high power, low size and weight laser that could be carried by such a platform and deliver lethal energy to an ICBM-class threat missile from hundreds of kilometers away. While both the military and industry are pursuing Directed Energy for tactical applications, MDA’s objectives pose a significantly greater challenge than other current efforts in terms of the power needed from the laser, the low size and weight required, and the range, speed, and size of the threat missiles. To that end, MDA is funding two R&D efforts to assess the feasibility of a high power (MWclass) and low SWaP (size, weight and power) laser: a fiber combining laser (FCL) project at MIT’s Lincoln Laboratory, and LLNL’s Diode-Pumped Alkali Laser (DPAL) system.

  11. Coupling the Alkaline-Surfactant-Polymer Technology and The Gelation Technology to Maximize Oil Production

    Energy Technology Data Exchange (ETDEWEB)

    Malcolm Pitts; Jie Qi; Dan Wilson; David Stewart; Bill Jones

    2005-10-01

    Gelation technologies have been developed to provide more efficient vertical sweep efficiencies for flooding naturally fractured oil reservoirs or more efficient areal sweep efficiency for those with high permeability contrast ''thief zones''. The field proven alkaline-surfactant-polymer technology economically recovers 15% to 25% OOIP more oil than waterflooding from swept pore space of an oil reservoir. However, alkaline-surfactant-polymer technology is not amenable to naturally fractured reservoirs or those with thief zones because much of injected solution bypasses target pore space containing oil. This work investigates whether combining these two technologies could broaden applicability of alkaline-surfactant-polymer flooding into these reservoirs. A prior fluid-fluid report discussed interaction of different gel chemical compositions and alkaline-surfactant-polymer solutions. Gel solutions under dynamic conditions of linear corefloods showed similar stability to alkaline-surfactant-polymer solutions as in the fluid-fluid analyses. Aluminum-polyacrylamide, flowing gels are not stable to alkaline-surfactant-polymer solutions of either pH 10.5 or 12.9. Chromium acetate-polyacrylamide flowing and rigid flowing gels are stable to subsequent alkaline-surfactant-polymer solution injection. Rigid flowing chromium acetate-polyacrylamide gels maintained permeability reduction better than flowing chromium acetate-polyacrylamide gels. Silicate-polyacrylamide gels are not stable with subsequent injection of either a pH 10.5 or a 12.9 alkaline-surfactant-polymer solution. Chromium acetate-xanthan gum rigid gels are not stable to subsequent alkaline-surfactant-polymer solution injection. Resorcinol-formaldehyde gels were stable to subsequent alkaline-surfactant-polymer solution injection. When evaluated in a dual core configuration, injected fluid flows into the core with the greatest effective permeability to the injected fluid. The same gel stability

  12. Interacting ZnCo2O4 and Au nanodots on carbon nanotubes as highly efficient water oxidation electrocatalyst

    Science.gov (United States)

    Cheng, Hui; Su, Chang-Yuan; Tan, Zhi-Yun; Tai, Su-Zhen; Liu, Zhao-Qing

    2017-07-01

    An advanced hybrid electrocatalyst consisting of ZnCo2O4 nanodots and Au decorated carbon nanotubes is developed for oxygen evolution reaction (OER). In the catalyst system, carbon nanotubes are served as the support substrate to enhance the conductivity of ZnCo2O4 and provide a high specific area; meanwhile, Au species accelerate the electron-stripping from cobalt ions during the catalytic process, leading to a fast promotion of cobalt ions with high valence state which possess a highly electrocatalytic efficiency. With the well synergistic effect between the components, ZnCo2O4/Au/CNTs exhibits low potential of 1.67 V at j = 10 mA cm-2, large current density of 97.8 mA cm-2 at high operating potential (1.8 V), and prominent durability in alkaline. This finding will pave a new avenue to search highly efficient and stable electrocatalysts for water splitting devices.

  13. 电感耦合等离子体原子发射光谱法同时测定饮用水的硬度和碱度%Simultaneous determination of the hardness and alkalinity in drinking water by inductively coupled plasma atomic emission spectrometry

    Institute of Scientific and Technical Information of China (English)

    霍建中; 段旭川

    2013-01-01

    The feasibility of simultaneous determination of hardness and alkalinity of drinking water by inductively coupled plasma atomic emission spectrometry (ICP-AES) was studied.the water sample was acidified off-line with diluted hydrochloric acid.The bicarbonates in water sample were in-situ converted into carbon dioxide,which was also dissolved in original water.Then,the solution was sampled by conventional single tube of inductively coupled plasma atomic emission spectrometer.The simultaneous sampling of CO2,Ca and Mg was realized at relatively low atomizer pressure.Among them,CO2 was sampled in gas state,while Ca and Mg were sampled in atomizing state.In this study,the bicarbonates with low sampling efficiency in atomizing method were converted into gas carbon dioxide,which had high sampling efficiency,thus the determination sensitivity of carbon was increased,realizing the accurate determination.The measured content of inorganic carbon was converted to the content of bicarbonates,so the alkalinity of drinking water was obtained.Meanwhile,the content of Ca and Mg was converted to the content of calcium carbonate to calculate the hardness of water.Under the optimal experimental conditions,i.e.,atomizer pressure of 241.3 kPa and dilution ratio of 5for water sample,the hardness and alkalinity of drinking water were simultaneously determined by this method.The found results were consistent with those obtained by titration method.%研究了使用电感耦合等离子体原子发射光谱法(ICP-AES)同时测定饮用水的硬度和碱度可行性.通过用稀盐酸离线酸化水样,使水样中的碳酸氢根原位转化为二氧化碳并继续溶解在原水中,然后使用ICP-AES仪器上常规的单管吸取溶液,在比较低的雾化器压力下实现了CO2、Ca、Mg的同时进样.其中CO2属于气态进样,而钙、镁属于雾化进样.由于方法将雾化法进样效率低的碳酸氢根转化成进样效率高的二氧化碳气态,因此碳的测定灵敏

  14. Extraction of protein from high-temperature peanut meal using combination process with steam flash-explosion,alkaline-extraction and acid-precipitation%蒸汽闪爆结合碱溶酸沉法提取高温花生粕中的蛋白质

    Institute of Scientific and Technical Information of China (English)

    章玉清; 杨瑞金; 张文斌; 华霄; 赵伟

    2013-01-01

    以高温花生粕为研究对象,研究了蒸汽闪爆结合碱溶酸沉法提取花生蛋白质的工艺及其产品的功能性质.通过单因素实验和正交实验确定优化的工艺条件为:高温花生粕首先用0.3%的稀硫酸在60℃条件下搅拌浸泡2h;用清水洗去表面稀酸后沥干再进行蒸汽闪爆处理,条件为:爆破压力1.6MPa、维压时间5min;最后采用碱溶酸沉法提取蛋白质,条件为:温度60℃、pH9.5、料水比1∶12(g/mL)、浸提时间为2h.在此工艺条件下,高温花生粕中蛋白质的提取率达到52.6%,比传统碱溶酸沉工艺提高了10.8%,且所得蛋白质产品的持水性、乳化性、起泡性和起泡稳定性有了显著提高,分别增强了67.1%、141.0%、131.3%和107.4%.蒸汽闪爆技术结合碱溶酸沉法适用于从高温花生粕中提取蛋白质,不仅可以提高蛋白质的提取率,而且能够改善产品的功能性质.%A combined process with steam flash-explosion,alkaline-extraction and acid-precipitation was used to extract protein from high-temperature peanut meal.Through single factor and orthogonal test,the optimum conditions were figured out.Firstly,the high-temperature peanut meal was soaked in 0.3% sulfuric acid solution at 60℃ for 2h,then drained it and washed with water to remove the acid solution remained in the surface of the meal.The pretreated meal was treated with steam flash-explosion at 1.6MPa for 5min.The protein in the steam flash-exploded meal was extracted by alkaline-extraction and acid-precipitation process.The optimal condition for alkaline-extraction was solid to water ratio:1∶12(g/mL),pH9.5,60℃ and 2h.Under these conditions,the protein extraction rate reached 52.6%,which was 10.8% higher than conventional alkaline extraction and acid-precipitation process.The water holding capacity,emulsifying activity index,foaming capacity and foaming stability of the protein extracted using this combined process were significantly

  15. Characterization of degradation products from alkaline wet oxidation of wheat straw

    DEFF Research Database (Denmark)

    Klinke, H.B.; Ahring, B.K.; Schmidt, A.S.

    2002-01-01

    Alkaline wet oxidation pre-treatment (water, sodium carbonate, oxygen, high temperature and pressure) of wheat straw was performed as a 2(4-1) fractional factorial design with the process parameters: temperature, reaction time, sodium carbonate and oxygen. Alkaline wet oxidation was an efficient...... pre-treatment of wheat straw that resulted in solid fractions with high cellulose recovery (96%) and high enzymatic convertibility to glucose (67%). Carbonate and temperature were the most important factors for fractionation of wheat straw by wet oxidation. Optimal conditions were 10 min at 195...... the solid fraction (62%) did not provide a corresponding increase in the phenol monomer content but was correlated to high carboxylic acid concentrations. The degradation products in the hemicellulose fractions co-varied with the pre-treatment conditions in the principal component analysis according...

  16. Identifying and preserving high-water mark data

    Science.gov (United States)

    Koenig, Todd A.; Bruce, Jennifer L.; O'Connor, Jim; McGee, Benton D.; Holmes, Jr., Robert R.; Hollins, Ryan; Forbes, Brandon T.; Kohn, Michael S.; Schellekens, Mathew; Martin, Zachary W.; Peppler, Marie C.

    2016-03-08

    High-water marks provide valuable data for understanding recent and historical flood events. The proper collection and recording of high-water mark data from perishable and preserved evidence informs flood assessments, research, and water resource management. Given the high cost of flooding in developed areas, experienced hydrographers, using the best available techniques, can contribute high-quality data toward efforts such as public education of flood risk, flood inundation mapping, flood frequency computations, indirect streamflow measurement, and hazard assessments.This manual presents guidance for skilled high-water mark identification, including marks left behind in natural and man-made environments by tranquil and rapid flowing water. This manual also presents pitfalls and challenges associated with various types of flood evidence that help hydrographers identify the best high-water marks and assess the uncertainty associated with a given mark. Proficient high-water mark data collection contributes to better understanding of the flooding process and reduces risk through greater ability to estimate flood probability.The U.S. Geological Survey, operating the Nation’s premier water data collection network, encourages readers of this manual to familiarize themselves with the art and science of high-water mark collection. The U.S. Geological survey maintains a national database at http://water.usgs.gov/floods/FEV/ that includes high-water mark information for many flood events, and local U.S. Geological Survey Water Science Centers can provide information to interested readers about participation in data collection and flood documentation efforts as volunteers or observers.

  17. Cenozoic high-K alkaline magmatism and associated Cu-Mo-Au mineralization in the Jinping-Fan Si Pan region, southeastern Ailao Shan-Red River shear zone, southwestern China-northwestern Vietnam

    Science.gov (United States)

    Tran, My Dung; Liu, Junlai; Nguyen, Quang Luat; Chen, Yue; Tang, Yuan; Song, Zhijie; Zhang, Zhaochong; Zhao, Zhidan

    2014-01-01

    The Jinping-Fan Si Pan (JFP) Cenozoic magmatic and Cu-Mo-Au metallogenic belt in the southeastern part of the Ailao Shan shear zone host the Tongchang, Chang‧an, Habo, and Chinh Sang Cu-Mo-Au deposits. These deposits form an integrated epithermal-porphyry regional mineralization system associated with 40-32 Ma high-K alkaline magmatism. The magmatic rocks in the belt have relatively low TiO2 (<0.73 wt%), P2O5 (<0.29 wt%), and FeO* (<4.99 wt%), and high Na2O (2.86-4.75 wt%) and K2O (4.01-7.98 wt%). They also have high contents of incompatible trace elements, and are enriched in LILE (Rb, Ba, K, Sr) and LREE. They have marked Nb, Ta, Ti and P depletion in primitive mantle-normalized spidergrams, and plot close to the EMII mantle field in the Sr-Nd isotopic diagram. These characteristics are similar to those of the Eocene high-K alkaline rocks along the northern Ailao Shan belt, eastern Tibet plateau. The sulfur and lead isotope analyses of sulfide minerals from both the ores and related magmatic rocks confirm the involvement of a magmatic ore fluid. The Cenozoic alkaline intrusions and Cu-Mo-Au mineralization in the JFP were formed prior to the initiation of left-lateral shearing along the Ailao Shan shear zone. The magmas appear to have been derived from enriched mantle, possibly with mixing of materials from the buried Tethyan oceanic lithosphere, and/or crust.

  18. 碱消解-HPLC同时测定土壤中的无机汞和甲基汞%Simultaneous Determination of Inorganic Mercury ( Ⅱ ) and Methyl Mercury in Soil by Alkaline Digestion-High Performance Liquid Chromatography

    Institute of Scientific and Technical Information of China (English)

    颜雪; 司友斌; 邹嫣; 陈宁; 颜世红

    2012-01-01

    建立了碱消解-高效液相色谱(HPLC)同时测定土壤中无机汞和甲基汞的分析方法.试验研究了KOH/甲醇提取液浓度、消解时间以及反萃取剂Na2S2O3浓度对碱消解过程中甲基汞提取率的影响,当KOH/甲醇提取液浓度为25%、消解时间为12 min、Na2S2O3浓度为0.01 mol/L时,KOH/甲醇溶液对土壤甲基汞的提取率最高.提取出的无机汞和甲基汞,经衍生后HPLC法测定,流动相最佳选择为0.01 mol/LTBABr和0.025 mol/L NaCl的水溶液:甲醇=45∶55(v∶v).在优化检测条件下,土壤样品中无机汞和甲基汞的检出限分别为1 ng/g和10 ng/g.该方法样品前处理简单、线性范围宽、精密度高、准确性好,适用于土壤中汞化合物的形态分析.%A method for the determination of inorganic mercury and methyl mercury in soils by high performance liquid chromatography (HPLC)with alkaline digestion was established. Experiments were done for examining the effects of KOH/ methanol concentration, digestion time and Na2S2O3 concentration on the extraction rates of methyl mercury in the process of alkaline digestion. When KOH/methanol concentration was 25%, digestion time was 12 min and Na2S2O3 concentration was 0.01 mol/L, the highest extraction rate of methyl mercury in soils were obtained. After extracted with KOH/methanol, mercury and methyl mercury were derivated and then detected by HPLC. The mobile phase was methanol+water (55+45 by volume Containing 0.01 mol/L tetra -n -alkylammonium bromides and 0.025 mol/L sodium chloride. In the optimized conditions, the detection limits for inorganic mercury and methyl mercury were 1 ng/g and 10 ng/g respectively. The method with a simple pre-treatment procedure, broad linear range, good accuracy and precision is suitable for the determination of mercury speciation in soils.

  19. Water-level change, High Plains aquifer, 1980 to 1995

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This raster data set represents water-level change in the High Plains aquifer of the United States from 1980 to 1995, in feet. The High Plains aquifer underlies...

  20. Water-level change, High Plains aquifer, 1995 to 2000

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This raster data set represents water-level change in the High Plains aquifer of the United States from 1995 to 2000, in feet. The High Plains aquifer underlies...

  1. Water-level change, High Plains aquifer, 2005 to 2009

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This raster data set represents water-level change in the High Plains aquifer of the United States from 2005 to 2009, in feet. The High Plains aquifer underlies...

  2. Water-level change, High Plains aquifer, 2000 to 2005

    Data.gov (United States)

    U.S. Geological Survey, Department of the Interior — This raster data set represents water-level change in the High Plains aquifer of the United States from 2000 to 2005, in feet. The High Plains aquifer underlies...

  3. The importance of catchment vegetation for alkalinity, phosphorus burial and macrophytes as revealed by a recent paleolimnological study in a soft water lake

    DEFF Research Database (Denmark)

    Klamt, Anna-Marie; Jensen, Henning S.; Mortensen, Morten Fischer

    2017-01-01

    to mainly coniferous forest) occurring during the last ca. 200years were reflected in the sediments of a soft water lake and how these changes influenced the lake ecosystem. Pollen, macrofossils, metals, different phosphorus (P) forms, organic matter, carbon and nitrogen contents were determined in short...

  4. The importance of catchment vegetation alkalinity, phosphorus burial and macrophytes as revealed by a recent paleolimnological study in a soft water lake

    DEFF Research Database (Denmark)

    Klamt, Anna-Maria; Jensen, Henning S.; Mortensen, Morten Fischer

    2016-01-01

    coniferous forest) occurring during the last ca. 200 years were reflected in the sediments of a soft water lake and how these changes influenced the lake ecosystem. Pollen, macrofossils, metals, different phosphorus (P) forms, organic matter, carbon and nitrogen contents were determined in short sediment...

  5. Water quality monitoring for high-priority water bodies in the Sonoran Desert network

    Science.gov (United States)

    Terry W. Sprouse; Robert M. Emanuel; Sara A. Strorrer

    2005-01-01

    This paper describes a network monitoring program for “high priority” water bodies in the Sonoran Desert Network of the National Park Service. Protocols were developed for monitoring selected waters for ten of the eleven parks in the Network. Park and network staff assisted in identifying potential locations of testing sites, local priorities, and how water quality...

  6. The potential for constructed wetlands to treat alkaline bauxite residue leachate: laboratory investigations.

    Science.gov (United States)

    R, Buckley; T, Curtin; R, Courtney

    2016-07-01

    High alkalinity (pH > 12) of bauxite residue leachates presents challenges for the long-term storage and managements of the residue. Whilst the use of constructed wetlands is gaining in interest for its use in the treatment of alkaline waters, thus far, there is limited evidence of its suitability for treating NaOH dominated bauxite residue leachate. A series of batch trials were conducted to investigate the potential for constructed wetland conferred mechanisms (dilution water quality, contact with CO2, and substrate type) for treating NaOH solutions to levels permissible for discharge (p constructed wetland. Formation of a calcite precipitate was observed in some treatments and further characterisation by XRD and XPS suggested surface coating with Na2CO3. It is therefore suggested that, under suitable conditions, constructed wetland technology can reduce leachate pH to constructed wetland.

  7. Highly energetic phenomena in water electrolysis

    Science.gov (United States)

    Postnikov, A. V.; Uvarov, I. V.; Lokhanin, M. V.; Svetovoy, V. B.

    2016-12-01

    Water electrolysis performed in microsystems with a fast change of voltage polarity produces optically invisible nanobubbles containing H2 and O2 gases. In this form the gases are able to the reverse reaction of water formation. Here we report extreme phenomena observed in a millimeter-sized open system. Under a frequency of driving pulses above 100 kHz the process is accompanied by clicking sounds repeated every 50 ms or so. Fast video reveals that synchronously with the click a bubble is growing between the electrodes which reaches a size of 300 μm in 50 μs. Detailed dynamics of the system is monitored by means of a vibrometer by observing a piece of silicon floating above the electrodes. The energy of a single event is estimated as 0.3 μJ and a significant part of this energy is transformed into mechanical work moving the piece. The observations are explained by the combustion of hydrogen and oxygen mixture in the initial bubble with a diameter of about 40 μm. Unusual combustion mechanism supporting spontaneous ignition at room temperature is responsible for the process. The observed effect demonstrates a principal possibility to build a microscopic internal combustion engine.

  8. From water reduction to oxidation: Janus Co-Ni-P nanowires as high-efficiency and ultrastable electrocatalysts for over 3000 h water splitting

    Science.gov (United States)

    Li, Wei; Gao, Xuefei; Wang, Xiaoguang; Xiong, Dehua; Huang, Pei-Pei; Song, Wei-Guo; Bao, Xiaoqing; Liu, Lifeng

    2016-10-01

    Vertically-aligned cobalt nickel phosphide nanowires (Co-Ni-P NWs) are synthesized on Ni foam by phosphorizing cobalt carbonate hydroxide precursor NWs in red phosphorous vapor at an elevated temperature. The as-fabricated self-supported integrated electrode (Ni@Co-Ni-P) exhibits outstanding electrocatalytic activity for the hydrogen evolution reaction (HER) in alkaline solution, delivering a cathodic current density of 100 mA cm-2 at a small overpotential of 137 mV and a Tafel slope of 65.1 mV dec-1. Furthermore, the electrode shows remarkable catalytic performance towards the oxygen evolution reaction (OER), affording an anodic current density of 90.2 mA cm-2 at an overpotential of 350 mV, superior to many other transition metal based OER catalysts. Given the well-defined bifunctionality, an alkaline electrolyzer is assembled using two symmetrical Ni@Co-Ni-P as the cathode and anode, respectively, which demonstrates outstanding catalytic performance for sustained water splitting at varying current densities from 10 to 240 mA cm-2. Significantly, the Ni@Co-Ni-P electrolyzer is able to operate for 3175 h (ca. 132 days) without degradation at an industry-relevant current density of 100 mA cm-2, leading to exceptionally high H2 production rate of 311 mmol h-1 g-1catalyst cm-2 with an energy efficiency of 76% at ca. 1.9 V.

  9. Treatment of Highly Turbid Water by Polyaluminum Ferric Chloride (PAFCL

    Directory of Open Access Journals (Sweden)

    Fazel Fazel Mohammadi-Moghaddam

    2015-10-01

    Full Text Available Background & Aims of the Study: In some situation like rainfall seasons raw water become very turbid so it affected the water treatment plant processes and quality of produced water. Treatment of very high turbid water has some concerns like precursors for disinfection by-products and very loading rate of particle on filter's media and consequently increases in water consumption for filter backwash. This paper investigates the performance of a composite inorganic polymer of aluminium and ferric salt, Polyaluminium ferric chloride (PAFCl, for the removal of turbidity, color and natural organic matter (NOM from high turbid water. Materials and Methods: Experiments were carried out by Jar test experiment by synthetic water samples with 250 and 500 NTU turbidity that prepared in laboratory. Results: The results of conventional jar test showed that the optimum pH for coagulation of water sample was 7.5 to 8 and optimum dosage of the coagulant was 10 mg/L. Removal efficiency of turbidity, color and UV adsorbent at 254 nm at optimum dose and pH without filtration was 99.92%, 100% and 80.6% respectively for first sample (250 NTU and 99.95%, 99.49% and 84.77 for second sample (500 NTU respectively. Conclusion: It concluded that polyaluminium ferric chloride has a very good efficiency for the removal of turbidity, color and organic matter in high turbid water. Also it can be select as a coagulant for high turbid water and some waste water from water treatment plant like filter backwash water.

  10. Novel As-doped, As and N-codoped carbon nanotubes as highly active and durable electrocatalysts for O2 reduction in alkaline medium

    Science.gov (United States)

    Liu, Ziwu; Li, Meng; Wang, Fang; Wang, Quan-De

    2016-02-01

    To develop more efficient metal-free cathode electrocatalysts for fuel cells, novel arsenic (As)-doped, As and N-codoped carbon nanotubes are synthesized by chemical vapor deposition in this work. The as-prepared As-containing carbon nanotubes exhibit significantly enhanced activity and long-term durability for the oxygen reduction reaction (ORR) in alkaline medium, indicating that the doping of As or codoping As with other heteroatoms into carbon matrix could improve the ORR activity of carbon materials due to the changes in electronic and physical properties of carbon nanotubes evidenced by density functional theory calculations. Moreover, As-containing carbon nanotubes also display much better methanol tolerance, showing a good potential application for future fuel cells.

  11. Technology Status of Extracting Bitumen from Oil Sand using Hot alkaline Water%油砂沥青热碱水萃取分离技术现状

    Institute of Scientific and Technical Information of China (English)

    罗茂; 耿安松; 廖泽文

    2011-01-01

    作为非常规石油资源的油砂受到愈来愈多的重视.本文评述了世界油砂资源开发现状和中国油砂资源的利用前景,总结了工业上成熟的油砂沥青热碱水萃取技术分离沥青的流程,论述了热碱水萃取过程中沥青与矿物、粘土和气泡之间相互作用及其对沥青分离效率的影响;全面总结了油砂沥青热碱水萃取过程中温度、pH值、多价阳离子和加工助剂等物理化学条件对沥青与矿物之间相互作用和沥青有效分离的影响.最后指出油砂沥青热碱水萃取分离的最优化实验技术研究是值得进一步深入研究的方向,原子力显微镜的运用和不同萃取技术的综合运用将在改善沥青的萃取分离效果上发挥作用.%As an unconventional fuel resource, tar sand is widely considered to be an important supplement for oil production in the near future due to the skyrocketing price of crude oil and the increasing demand of fuel resources in the world. This paper reviewed oil sand utilization worldwide and the prospect of oil sand exploitation in China.The commercial procedures for hot water based bitumen extraction and subsequent bitumen purification were reviewed. Interactions of bitumen-minerals, bitumen-clay and bitumen-gas bubbles were discussed. The effect of various physical, chemical parameters, such as water temperature, pH value, metal ions in the slurring water and various processing additives, to the interactions of bitumen-mineral and the final recovery of bitumen is systematically summarized. The reviewers believed that finding optimized technique for the hot water based bitumen extraction and separation will be a potential future research focus, and believed that application of Atom Force Microscopy and synthetic utilization of various extraction methods will play an important role in enhancing oil sand bitumen extraction.

  12. Is high-pressure water the cradle of life?

    Energy Technology Data Exchange (ETDEWEB)

    Bassez, Marie-Paule [Universite de Strasbourg-3, Departement Chimie, 72 route du Rhin, 67400 Illkirch (France)

    2003-06-25

    Several theories have been proposed for the synthesis of prebiotic molecules. This letter shows that the structure of supercritical water, or high-pressure water, could trigger prebiotic synthesis and the origin of life deep in the oceans, in hydrothermal vent systems. Dimer geometries of high-pressure water may have a point of symmetry and a zero dipole moment. Consequently, simple apolar molecules found in submarine hydrothermal vent systems will dissolve in the apolar environment provided by the apolar form of the water dimer. Apolar water could be the medium which helps precursor molecules to concentrate and react more efficiently. The formation of prebiotic molecules could thus be linked to the structure of the water inside chimney nanochannels and cavities where hydrothermal piezochemistry and shock wave chemistry could occur. (letter to the editor)

  13. Rationally designed porous polystyrene encapsulated zirconium phosphate nanocomposite for highly efficient fluoride uptake in waters

    Science.gov (United States)

    Zhang, Qingrui; Du, Qing; Jiao, Tifeng; Zhang, Zhaoxiang; Wang, Sufeng; Sun, Qina; Gao, Faming

    2013-01-01

    Fluoride pollution in waters has engulfed worldwide regions and an excess of fluoride intake always causes skeletal fluorosis. Herein, a novel hybrid nanomaterial ZrP-MPN was fabricated for fluoride retention by encapsulating nano-ZrP onto macroporous polystyrene materials modified with quaternary ammonium groups. The as-obtained materials exhibited favorable removal of fluoride ions from aqueous solution in presence of common anions (SO42−/NO3−/Cl−) at high contents. Moreover outstanding sorption properties were also detected by involving series of commercial adsorbents (AA/magnetite/GFH/manganese sands) as references. Such satisfactory performances might be ascribed to the structural design of nanocomposite. (1) the CH2N+(CH3)3Cl groups enhances sorption diffusion and preconcentration in sorbent phase theoretically based on Donnan membrane principle; (2) the embedded ZrP nanoparticles also devotes to the efficient adsorption capacities due to its size-dependent specific properties. Additionally, the exhausted ZrP-MPN could be regenerated readily by alkaline solution. Thus, ZrP-MPN was a promising material for fluoride retention in waters. PMID:23989688

  14. Rationally designed porous polystyrene encapsulated zirconium phosphate nanocomposite for highly efficient fluoride uptake in waters

    Science.gov (United States)

    Zhang, Qingrui; Du, Qing; Jiao, Tifeng; Zhang, Zhaoxiang; Wang, Sufeng; Sun, Qina; Gao, Faming

    2013-08-01

    Fluoride pollution in waters has engulfed worldwide regions and an excess of fluoride intake always causes skeletal fluorosis. Herein, a novel hybrid nanomaterial ZrP-MPN was fabricated for fluoride retention by encapsulating nano-ZrP onto macroporous polystyrene materials modified with quaternary ammonium groups. The as-obtained materials exhibited favorable removal of fluoride ions from aqueous solution in presence of common anions (SO42-/NO3-/Cl-) at high contents. Moreover outstanding sorption properties were also detected by involving series of commercial adsorbents (AA/magnetite/GFH/manganese sands) as references. Such satisfactory performances might be ascribed to the structural design of nanocomposite. (1) the CH2N+(CH3)3Cl groups enhances sorption diffusion and preconcentration in sorbent phase theoretically based on Donnan membrane principle; (2) the embedded ZrP nanoparticles also devotes to the efficient adsorption capacities due to its size-dependent specific properties. Additionally, the exhausted ZrP-MPN could be regenerated readily by alkaline solution. Thus, ZrP-MPN was a promising material for fluoride retention in waters.

  15. High Throughput Analysis of Photocatalytic Water Purification

    NARCIS (Netherlands)

    Romao, Joana; Barata, David; Habibovic, Pamela; Mul, Guido; Baltrusaitis, Jonas

    2014-01-01

    We present a novel high throughput photocatalyst efficiency assessment method based on 96-well microplates and UV-Vis spectroscopy. We demonstrate the reproducibility of the method using methyl orange (MO) decomposition, and compare kinetic data obtained with those provided in the literature for lar

  16. Experimental study of water effects on gas desorption during high-pressure water injection

    Institute of Scientific and Technical Information of China (English)

    ZHANG Guo-hua; LIU Xian-xin; BI Ye-wu; PU Wen-long

    2011-01-01

    For the question of applying high-pressure water injection to increase gas extraction efficiency by increasing the permeability of water to drive gas action,an independently designed gas desorption experimental measuring device was used under the condition of external solution invasion.The law of water effect on gas desorption was obtained after water invasion through experiment for the first time.The results show that water's later invasion not only can make the quantity of gas desorption greatly reduced,but also can make gas desorption end early.Therefore,when evaluating the applications of high-pressure water injection to increase gas extraction efficiency,we should take water damaging effects on gas desorption into account.

  17. Volume analysis of supercooled water under high pressure

    OpenAIRE

    Duki, Solomon F.; Tsige, Mesfin

    2016-01-01

    Motivated by recent experimental findings on the volume of supercooled water at high pressure [O. Mishima, J. Chem. Phys. 133, 144503 (2010)] we performed atomistic molecular dynamics simulations study of bulk water in the isothermal-isobaric ensemble. Cooling and heating cycles at different isobars and isothermal compression at different temperatures are performed on the water sample with pressures that range from 0 to 1.0 GPa. The cooling simulations are done at temperatures that range from...

  18. [Measure of alkalinity in an alcohol/water mixture by potentiometric end-point detection. Critical remarks on a new method in the European pharmacopoeia].

    Science.gov (United States)

    Völgyi, Gergely; Takácsné, Novák Krisztina

    2003-01-01

    The European Pharmacopoeia introduced a new alkalimetric method for assay of alkaloid (and other N-base) salts. The principle of method is: after preliminary addition of small amount of hydrochloric acid, titration is carried out with 0.1 N NaOH in alcohol/water mixture with potentiometric end-point detection. The applicability and reproducibility of this method have been examined at 11 substances. The results of alkalimetric method were compared to those obtained by nonaqueous titration (Ph. Hg. VII.). The method of Ph. Eur. is well reproducible (SD titration carried out according to the present prescription of Ph. Eur. 4., minimum pKa 7 should be the basicity of the alkaloids. They suggest to perform the titration in 70% alcohol and without preliminary addition of HCl for weaker bases.

  19. 2nd Generation alkaline electrolysis. Final report

    Energy Technology Data Exchange (ETDEWEB)

    Yde, L. [Aarhus Univ. Business and Social Science - Centre for Energy Technologies (CET), Aarhus (Denmark); Kjartansdottir, C.K. [Technical Univ. of Denmark. DTU Mechanical Engineering, Kgs. Lyngby (Denmark); Allebrod, F. [Technical Univ. of Denmark. DTU Energy Conversion, DTU Risoe Campus, Roskilde (Denmark)] [and others

    2013-03-15

    conditions and the degradation mechanism was examined. One of the strong visions for the 2{sup nd} generation electrolyser concept has been to develop a modular system with several standardized components. The following modules have been designed: 1) Electrolyser module; 2) Deoxer Module; 3) Dryer Module; 4) Water Treatment Module; 5) Power supply and Control unit; 6) Rack mount. The developed 2{sup nd} generation rack-mounted alkaline electrolyser system has been installed and demonstrated for 18 month in a college (H2College) with 66 apartments. A number of measurements were performed on the system installed in H2College. No measurements on the overall system efficiency were conducted. However measurement on the stack showed a stack efficiency of 86.5% at a current density of 177mA/cm{sup 2} and a temperature of 74.4 deg. C at the hydrogen outlet. The system is estimated to have run roughly 2000h during the demonstration period. The demonstration of the 2{sup nd} generation alkaline electrolyser is considered a success for several reasons. While not all technical goals were reached, the research and development in the project have resulted in some very good solutions for most of the challenges in high pressure alkaline electrolysis. The concept of a rack mounted electrolyser was proven viable, and all critical aspects of the modularisation have been covered. (LN)

  20. A pH-responsive and magnetically separable dynamic system for efficient removal of highly dilute antibiotics in water.

    Science.gov (United States)

    Liu, Wanpeng; Ma, Jianqing; Shen, Chensi; Wen, Yuezhong; Liu, Weiping

    2016-03-01

    In order to control the antibiotic-related crisis and reduce the negative impacts on the environment and human health, it is urgent to develop effective technologies to eliminate residual antibiotics in water. Herein, we successfully fabricated a novel, pH-responsive and magnetically separable dynamic system for micropollutant adsorption and oxidation degradation in graphene oxide (GO)/nanoscale zero-valent iron (nZVI) composite with macroscopic structure. The pH-responsive self-assembly behavior of GO/nZVI composite was explored. The macroscopic structure of GO/nZVI composite serves as an excellent adsorbent for antibiotic removal in water. The adsorption process is fast and highly efficient even in high salty and humic acid containing water under acid to neutral conditions. After removal antibiotics, GO/nZVI composite is conveniently separated by magnetic system and put into alkaline solution (pH > 9) for adsorbent regeneration. Interestingly, it is found that at pH > 9, GO/nZVI composite disassembles partly upon increasing pH values, leading to the elution of antibiotics for efficient antibiotics degradation by ozonization. More importantly, this pH-responsive GO/nZVI system exhibits high removal efficiency, high stability, reusability and easily separation, making it a promising method for treatment of water with micropollutants.

  1. Water high resolution spectroscopic observations of massive protostars with Herschel

    NARCIS (Netherlands)

    Herpin, F.; Chavarría, L.; van der Tak, F.; Wyrowski, F.

    2012-01-01

    I will present the results from the Water In Star-forming regions with Herschel Space Observatory key program (WISH) concerning high-mass protostars. This project is designed to probe with HIFI and PACS instruments the physical and chemical structure of these young stellar objects using water and re

  2. Study of physico-chemical characteristics of water bodies around Jaipur.

    Science.gov (United States)

    Srivastava, Neera; Agrawal, Meena; Tyagi, Anupama

    2003-04-01

    The present study has been undertaken to evaluate physico-chemical parameters (pH, temperature, dissolved oxygen, free carbon dioxide, alkalinity and hardness) and zinc concentration in water bodies in and around Jaipur. Water samples from Jalmachal Lake, Nevta Lake, Amer Lake and Ramgarh Lake were analysed. Results reveal that the water of Jalmahal Lake is most polluted due to high pH, hardness, alkalinity, free carbon dioxide, zinc content, and a low level of dissolved oxygen. Contrarily Ramgarh Lake is least polluted, as it has high dissolved oxygen and low pH, alkalinity, free carbon dioxide, hardness and zinc content.

  3. NOS CO-OPS Water Level Data, Verified, High Low

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — This dataset has verified (quality-controlled), daily, high low water level (tide) data from NOAA NOS Center for Operational Oceanographic Products and Services...

  4. Inundation Mapping Tidal Surface - Mean Higher High Water

    Data.gov (United States)

    National Oceanic and Atmospheric Administration, Department of Commerce — These data are a derived product of the NOAA VDatum tool and they extend the tool's Mean Higher High Water (MHHW) tidal datum conversion inland beyond its original...

  5. Stable highly hydrophobic and oleophilic meshes for oil water separation

    Science.gov (United States)

    Wang, Qingjun; Cui, Zhe; Xiao, Yi; Chen, Qingmin

    2007-09-01

    This paper describes a simple method for fabricating both highly hydrophobic and oleophilic meshes by coating thin fluoro-containing films. The static contact angle of such meshes is greater than 150° for water, and close to 0° for kerosene, xylene and toluene. These meshes can separate water from oil effectively without resorting to any extra power or chemical agent. Moreover, they exhibited stable water resisting, anti-chemical erosion and anti-hot aging properties. It promises as a candidate for the separation of oil and water.

  6. Alkaline chemistry of transuranium elements and technetium and the treatment of alkaline radioactive wastes

    Energy Technology Data Exchange (ETDEWEB)

    Delegard, C.H. [Westinghouse Hanford Co., Richland, WA (United States); Peretrukhin, V.F.; Shilov, V.P.; Pikaev, A.K. [Russian Academy of Sciences (Russian Federation). Inst. of Physical Chemistry

    1995-05-01

    Goal of this survey is to generalize the known data on fundamental physical-chemical properties of TRUs and Tc, methods for their isolation, and to provide recommendations that will be useful for partitioning them from alkaline high-level wastes.

  7. Application of maize tassel for the removal of Pb, Se, Sr, U and V from borehole water contaminated with mine wastewater in the presence of alkaline metals.

    Science.gov (United States)

    Zvinowanda, Caliphs M; Okonkwo, Jonathan O; Sekhula, Mahlatse M; Agyei, Nana M; Sadiku, Rotimi

    2009-05-30

    In this study, the removal of Pb(II) from aqueous solutions by tassel powder was studied and optimised. Batch experiments were conducted on simulated solutions using tassel powder adsorbent and the effects of contact time, pH and concentration on the extent of Pb (II) removal was studied. Equilibrium and kinetic models for Pb(II) sorption were developed by considering the effect of contact time and concentration at optimum pH 4 and fixed temperature(25 degrees C). The Freundlich model was found to describe the sorption energetics of Pb(II) on tassel more fully than the Langmuir. A maximum Pb(II) loading capacity of 333.3mg/g on tassel was obtained. The adsorption process could be well described by both the Langmuir and Freundlich isotherms with R(2) values of 0.957 and 0.972, respectively. The kinetic parameters were obtained by fitting data from the effect of contact time on adsorption capacity into the pseudo-first, pseudo-second-order and intra-particle diffusion equations. The kinetics of Pb(II) on tassel surface was well defined using linearity coefficients (R(2)) by pseudo-second-order (0.999), followed by pseudo-first-order (0.795) and lastly intra-particle diffusion (0.6056), respectively. The developed method was then applied to environmental samples taken from borehole waters contaminated with mine wastewater. The removal of Pb (ND-100%), Se (100%), Sr (5.41-59.0%), U (100%) and V (46.1-100%) was attained using tassel. The uptake of the metals from environmental samples was dependent on pH, ionic strength and levels of other competing species.

  8. Tidal Analysis of High and Low Water Data

    Institute of Scientific and Technical Information of China (English)

    LI Peiliang; LI Lei; ZUO Juncheng; ZHAO Wei; CHEN Zongyong

    2004-01-01

    The harmonic analysis method based on high and low water levels is discussed in this paper. In order to make full use of the information of high and low water observations (the time derivative of water level at the observation time is zero), the weight coefficient, w, is introduced to control the importance of the part related to this information in the error formula. The major diurnal constituents, O1 and K1, and semi-diurnal constituents, N2, M2 and S2 are selected directly from the monthly data analysis, and some other important constituents, P1, v2 and K2, are included as the inferred constituents.The obtained harmonic constants of the major constituents are very close to those obtained from the analysis of hourly data,and this shows that high and low water data can be used to extract tidal constants with high accuracy. The analysis result also shows that the inference and the weighting coefficient are important in the high and low water data analysis, and it is suggested that w≥1 should be taken in monthly high and low water data analysis. This analysis method can be used directly to analyze altimetric data with w=0.

  9. Simultaneous determination of 24 or more acidic and alkaline phytohormones in femtomole quantities of plant tissues by high-performance liquid chromatography-electrospray ionization-ion trap mass spectrometry.

    Science.gov (United States)

    Liu, Shichang; Chen, Weiqi; Qu, Long; Gai, Ying; Jiang, Xiangning

    2013-02-01

    Phytohormones act at relatively low concentrations as major regulatory factors of plant growth and development, and cross talk of phytohormones is currently of great interest throughout the plant science community. To meet this demand, a method that is capable of simultaneously analyzing diverse plant hormones is essential. This paper introduces a high-performance liquid chromatographic separation technique coupled with sensitive and selective ion trap mass spectrometry to simultaneously determine 24 or more acidic and alkaline phytohormones, including auxin, cis- and trans-abscisic acid, 11 cytokinins, and 10 gibberellins, in a single injection of sample. A binary solid-phase extraction using Oasis MCX cartridges for cations and Oasis MAX cartridges for anions was used to prepurify more than 24 acidic and alkaline phytohormones from a single plant extract. The method showed good linearity for all 24 phytohormones with R(2) values ranging from 0.9903 to 0.9997. Limits of detection for most of the phytohormones were in the femtomole range with some extending into the sub-femtomole range. This method was applied to hundreds of plant samples comprising different tissues from various plants, including herbaceous, woody climbing, and woody plants to demonstrate feasibility and to validate the methodology.

  10. Effects of Alkaline Salts on Water-Holding Capacity of Frozen Surimi%碱性盐对冷冻鱼糜保水性的影响

    Institute of Scientific and Technical Information of China (English)

    李莎莎; 安玥琦; 丁玉琴; 赵思明; 熊善柏

    2012-01-01

    以白鲢鱼糜为研究对象,研究添加柠檬酸钠、乳酸钠对冷冻鱼糜保水品质的影响。结果表明,添加柠檬酸钠、乳酸钠及两者的混合物可有效提高冷冻鱼糜的保水特性,且添加柠檬酸钠与乳酸钠的混合物优于单独添加柠檬酸钠或乳酸钠。经正交试验优化,在鱼糜中添加0.25%乳酸钠和0.50%柠檬酸钠时,冷冻鱼糜的解冻损失率最低,其离心损失率、煮制损失率与添加0.50%的复合磷酸盐的冷冻鱼糜无显著差异(P〉0.05),按一定比例混合的柠檬酸钠与乳酸钠可替代复合磷酸盐保水剂。%The individual and combined effects of sodium citrate and sodium lactate on the water-holding capacity(WHC) of frozen silver carp surimi were studied.The individual addition of sodium citrate and sodium lactate and their combination was effective in improving the WHC of frozen surimi,especially their combined use.The results of optimization by orthogonal array design indicated that the addition of 0.25% sodium lactate and 0.50% sodium citrate resulted in minimum thaw loss in frozen surimi and that no significant differences in centrifugation loss and cooking loss were found compared with the addition of 0.50% compound phosphate(P 0.05).The combined use of sodium citrate and sodium lactate in a given proportion may be an alternative to compound phosphate.

  11. Microbial communities and arsenic biogeochemistry at the outflow of an alkaline sulfide-rich hot spring

    Science.gov (United States)

    Jiang, Zhou; Li, Ping; van Nostrand, Joy D.; Zhang, Ping; Zhou, Jizhong; Wang, Yanhong; Dai, Xinyue; Zhang, Rui; Jiang, Dawei; Wang, Yanxin

    2016-04-01

    Alkaline sulfide-rich hot springs provide a unique environment for microbial community and arsenic (As) biogeochemistry. In this study, a representative alkaline sulfide-rich hot spring, Zimeiquan in the Tengchong geothermal area, was chosen to study arsenic geochemistry and microbial community using Illumina MiSeq sequencing. Over 0.26 million 16S rRNA sequence reads were obtained from 5-paired parallel water and sediment samples along the hot spring’s outflow channel. High ratios of As(V)/AsSum (total combined arsenate and arsenite concentrations) (0.59-0.78), coupled with high sulfide (up to 5.87 mg/L), were present in the hot spring’s pools, which suggested As(III) oxidation occurred. Along the outflow channel, AsSum increased from 5.45 to 13.86 μmol/L, and the combined sulfide and sulfate concentrations increased from 292.02 to 364.28 μmol/L. These increases were primarily attributed to thioarsenic transformation. Temperature, sulfide, As and dissolved oxygen significantly shaped the microbial communities between not only the pools and downstream samples, but also water and sediment samples. Results implied that the upstream Thermocrinis was responsible for the transformation of thioarsenic to As(III) and the downstream Thermus contributed to derived As(III) oxidation. This study improves our understanding of microbially-mediated As transformation in alkaline sulfide-rich hot springs.

  12. Multisystemic functions of alkaline phosphatases.

    Science.gov (United States)

    Buchet, René; Millán, José Luis; Magne, David

    2013-01-01

    Human and mouse alkaline phosphatases (AP) are encoded by a multigene family expressed ubiquitously in multiple tissues. Gene knockout (KO) findings have helped define some of the precise exocytic functions of individual isozymes in bone, teeth, the central nervous system, and in the gut. For instance, deficiency in tissue-nonspecific alkaline phosphatase (TNAP) in mice (Alpl (-/-) mice) and humans leads to hypophosphatasia (HPP), an inborn error of metabolism characterized by epileptic seizures in the most severe cases, caused by abnormal metabolism of pyridoxal-5'-phosphate (the predominant form of vitamin B6) and by hypomineralization of the skeleton and teeth featuring rickets and early loss of teeth in children or osteomalacia and dental problems in adults caused by accumulation of inorganic pyrophosphate (PPi). Enzyme replacement therapy with mineral-targeting TNAP prevented all the manifestations of HPP in mice, and clinical trials with this protein therapeutic are showing promising results in rescuing life-threatening HPP in infants. Conversely, TNAP induction in the vasculature during generalized arterial calcification of infancy (GACI), type II diabetes, obesity, and aging can cause medial vascular calcification. TNAP inhibitors, discussed extensively in this book, are in development to prevent pathological arterial calcification. The brush border enzyme intestinal alkaline phosphatase (IAP) plays an important role in fatty acid (FA) absorption, in protecting gut barrier function, and in determining the composition of the gut microbiota via its ability to dephosphorylate lipopolysaccharide (LPS). Knockout mice (Akp3 (-/-)) deficient in duodenal-specific IAP (dIAP) become obese, and develop hyperlipidemia and hepatic steatosis when fed a high-fat diet (HFD). These changes are accompanied by upregulation in the jejunal-ileal expression of the Akp6 IAP isozyme (global IAP, or gIAP) and concomitant upregulation of FAT/CD36, a phosphorylated fatty acid

  13. Highly water-soluble multi-walled carbon nanotubes amine-functionalized by supercritical water oxidation.

    Science.gov (United States)

    Chun, Kyoung-Yong; Moon, In-Kyu; Han, Joo-Hee; Do, Seung-Hoe; Lee, Jin-Seo; Jeon, Seong-Yun

    2013-11-07

    Multi-walled carbon nanotubes (MWNTs) have been amine-functionalized by eco-friendly supercritical water oxidation. The facilely functionalized MWNTs have high solubility (~84 mg L(-1)) in water and 78% transmittance at 30-fold dilution. The Tyndall effect is also shown for several liquids.

  14. SrCo1−xTixO3−δ perovskites as excellent catalysts for fast degradation of water contaminants in neutral and alkaline solutions

    Science.gov (United States)

    Miao, Jie; Sunarso, Jaka; Su, Chao; Zhou, Wei; Wang, Shaobin; Shao, Zongping

    2017-01-01

    Perovskite-like oxides SrCo1−xTixO3−δ (SCTx, x = 0.1, 0.2, 0.4, 0.6) were used as heterogeneous catalysts to activate peroxymonosulfate (PMS) for phenol degradation under a wide pH range, exhibiting more rapid phenol oxidation than Co3O4 and TiO2. The SCT0.4/PMS system produced a high activity at increased initial pH, achieving optimized performance at pH ≥ 7 in terms of total organic carbon removal, the minimum Co leaching and good catalytic stability. Kinetic studies showed that the phenol oxidation kinetics on SCT0.4/PMS system followed the pseudo-zero order kinetics and the rate on SCT0.4/PMS system decreased with increasing initial phenol concentration, decreased PMS amount, catalyst loading and solution temperature. Quenching tests using ethanol and tert-butyl alcohol demonstrated sulfate and hydroxyl radicals for phenol oxidation. This investigation suggested promising heterogeneous catalysts for organic oxidation with PMS, showing a breakthrough in the barriers of metal leaching, acidic pH, and low efficiency of heterogeneous catalysis. PMID:28281656

  15. SrCo1‑xTixO3‑δ perovskites as excellent catalysts for fast degradation of water contaminants in neutral and alkaline solutions

    Science.gov (United States)

    Miao, Jie; Sunarso, Jaka; Su, Chao; Zhou, Wei; Wang, Shaobin; Shao, Zongping

    2017-03-01

    Perovskite-like oxides SrCo1‑xTixO3‑δ (SCTx, x = 0.1, 0.2, 0.4, 0.6) were used as heterogeneous catalysts to activate peroxymonosulfate (PMS) for phenol degradation under a wide pH range, exhibiting more rapid phenol oxidation than Co3O4 and TiO2. The SCT0.4/PMS system produced a high activity at increased initial pH, achieving optimized performance at pH ≥ 7 in terms of total organic carbon removal, the minimum Co leaching and good catalytic stability. Kinetic studies showed that the phenol oxidation kinetics on SCT0.4/PMS system followed the pseudo-zero order kinetics and the rate on SCT0.4/PMS system decreased with increasing initial phenol concentration, decreased PMS amount, catalyst loading and solution temperature. Quenching tests using ethanol and tert-butyl alcohol demonstrated sulfate and hydroxyl radicals for phenol oxidation. This investigation suggested promising heterogeneous catalysts for organic oxidation with PMS, showing a breakthrough in the barriers of metal leaching, acidic pH, and low efficiency of heterogeneous catalysis.

  16. Water Stage Forecasting in Tidal streams during High Water Using EEMD

    Science.gov (United States)

    Chen, Yen-Chang; Kao, Su-Pai; Su, Pei-Yi

    2017-04-01

    There are so many factors may affect the water stages in tidal streams. Not only the ocean wave but also the stream flow affects the water stage in a tidal stream. During high water, two of the most important factors affecting water stages in tidal streams are flood and tide. However the hydrological processes in tidal streams during high water are nonlinear and nonstationary. Generally the conventional methods used for forecasting water stages in tidal streams are very complicated. It explains the accurately forecasting water stages, especially during high water, in tidal streams is always a difficult task. The study makes used of Ensemble Empirical Model Decomposition (EEMD) to analyze the water stages in tidal streams. One of the advantages of the EEMD is it can be used to analyze the nonlinear and nonstationary data. The EEMD divides the water stage into several intrinsic mode functions (IMFs) and a residual; meanwhile, the physical meaning still remains during the process. By comparing the IMF frequency with tidal frequency, it is possible to identify if the IMF is affected by tides. Then the IMFs is separated into two groups, affected by tide or not by tide. The IMFs in each group are assembled to become a factor. Therefore the water stages in tidal streams are only affected by two factors, tidal factor and flood factor. Finally the regression analysis is used to establish the relationship between the factors of the gaging stations in the tidal stream. The available data during 15 typhoon periods of the Tanshui River whose downstream reach is in estuary area is used to illustrate the accuracy and reliability of the proposed method. The results show that the simple but reliable method is capable of forecasting water stages in tidal streams.

  17. Photovoltaic hydrogen production with commercial alkaline electrolysers

    Energy Technology Data Exchange (ETDEWEB)

    Ursua, A.; Lopez, J.; Gubia, E.; Marroyo, L.; Sanchis, P. [Public Univ. of Navarra, Pamplona (Spain). Dept. of Electric and Electronic Engineering

    2010-07-01

    Renewable energy sources and Electrolysis generate the so-called green Hydrogen, a zero-emission and potentially fossil fuel independent energy source. However, the inherent variability of the renewable energy sources implies a mode of operation for which most current electrolysers have not been designed. This paper analyses the operation of a water electrolyser fed with photovoltaic (PV) generator electric profile. The system, Integrated by a 1 Nm{sup 3}/h Hydrogenics alkaline electrolyser and a 5100 W PV generator with 60 BP585 modules, is installed at the Public University of Navarra (Spain). The PV generator profile fed to the electrolyser is emulated by a custom-made apparatus designed and built by the authors of this paper. The profile is designed according to real irradiance data measured by a calibration cell. The irradiance data are converted to the electric power profile that the PV generator would have delivered in case of having been connected to the electrolyser by means of a DC/DC converter with maximum power point tracking (MPPT). Finally, from previously measured power-current electrolyser characteristic curves, the current profile to be delivered to the electrolyser is obtained and programmed to the electronic device. The electrolyser was tested for two types of days. During the first day, the irradiance was very stable, whereas during the second day, the irradiance was very variable. The experimental results show an average power consumption rate and an efficiency of 4908 Wh/Nm{sup 3} and 72.1%, on the first day, and 4842 Wh/Nm{sup 3} and 73.3% on the second day. The electrolyser performance was particularly good in spite of the high variability of the electric supply of the second day. (orig.)

  18. 盐碱胁迫对尼罗罗非鱼鳃Na+/3HCO共转运子、碳酸酐酶基因表达的影响%Effects of salinity and alkalinity on mRNA expression of Na+/3HCO cotransporter and carbonic anhydrase genes fromOreochromis niloticus

    Institute of Scientific and Technical Information of China (English)

    梁从飞; 赵金良; 甘远迪; 王飞; Thammaratsuntorn Jeerawat; 伍勇; 李传阳; 罗明坤

    2016-01-01

    To understand fish osmotic adjustment mechanisms in saline and alkaline water, the partial cDNA se-quence was obtained from gills ofOreochromis niloticus. Physiological changes in serum osmolality, ion concen-tration (Na+, K+, Cl– and Ca2+), and gill carbonic anhydrase (CA) activities were determined, andCAandNBCe1 mRNA gene expressions under saline (10 g/L, 15 g/L NaCl), alkaline (1.5 g/L and 3 g/L NaHCO3), and sa-line-alkaline (salinity 10, 15 g/L NaCl; salinity 1.5, 3 g/L NaHCO3) conditions at different times (0 h, 6 h, 12 h, 24 h, 48 h, 72 h and 96 h) were compared. The results showed that serum osmolality, ion concentration, gill CA activity, CA andNBCe1 mRNA gene expression correlated positively with the strength of saline, alkaline and sa-line-alkaline stress. Over time, serum osmolality and ion concentration trends increased and then decreased. Os-motic pressure insaline and saline-alkaline water was higher than that in alkaline water. Gill CA activity in alkaline and saline-alkaline water was higher than that in saline water. Under low concentrations of stressors, CA activity reached its highest level at a later time. Slightly higherNBCe1 gene mRNA expression was detected in gills under high concentrations of stressors (P>0.05). GillCA mRNA expression in saline, alkaline and saline-alkaline water was increased, but the increase was more evident in alkaline and saline-alkaline water (P0.05)。单碱组和盐碱混合组鳃CA活性较单盐组高,低盐碱胁迫(盐度10,碱度1.5 g/L)下CA活性较晚达最高值;不同胁迫条件下, CA基因mRNA表达均表现上调,单碱、盐碱混合组更为显著(P<0.05),推测CA较NBCe1对体内3HCO-转运作用更为显著。研究结果为尼罗罗非鱼盐碱适应生理调节提供了基础资料。

  19. Prediction of Production Power for High-pressure Hydrogen by High-pressure Water Electrolysis

    Science.gov (United States)

    Kyakuno, Takahiro; Hattori, Kikuo; Ito, Kohei; Onda, Kazuo

    Recently the high attention for fuel cell electric vehicle (FCEV) is pushing to construct the hydrogen supplying station for FCEV in the world. The hydrogen pressure supplied at the current test station is intended to be high for increasing the FCEV’s driving distance. The water electrolysis can produce cleanly the hydrogen by utilizing the electricity from renewable energy without emitting CO2 to atmosphere, when it is compared to be the popular reforming process of fossil fuel in the industry. The power required for the high-pressure water electrolysis, where water is pumped up to high-pressure, may be smaller than the power for the atmospheric water electrolysis, where the produced atmospheric hydrogen is pumped up by compressor, since the compression power for water is much smaller than that for hydrogen gas. In this study the ideal water electrolysis voltage up to 70MPa and 523K is estimated referring to both the results by LeRoy et al up to 10MPa and 523K, and to the latest steam table. By using this high-pressure water electrolysis voltage, the power required for high-pressure hydrogen produced by the high-pressure water electrolysis method is estimated to be about 5% smaller than that by the atmospheric water electrolysis method, by assuming the compressor and pump efficiency of 50%.

  20. High Pressure Cryocooling of Protein Crystals: The Enigma of Water

    Science.gov (United States)

    Gruner, Sol M.

    2010-03-01

    A novel high-pressure cryocooling technique for preparation biological samples for x-ray analysis is described. The method, high-pressure cryocooling, involves cooling samples to cryogenic temperatures (e.g., 100 K) in high-pressure Helium gas (up to 200 MPa). It bears both similarities and differences to high-pressure cooling methods that have been used to prepare samples for electron microscopy, and has been especially useful for cryocooling of macromolecular crystals for x-ray diffraction. Examples will be given where the method has been effective in providing high quality crystallographic data for difficult samples, such as cases where ligands needed to be stabilized in binding sites to be visualized, or where very high resolution data were required. The talk concludes with a discussion of data obtained by high-pressure cryocooling that pertains to two of the most important problems in modern science: the enigma of water and how water affects the activity of proteins.

  1. Stability of Materials in High Temperature Water Vapor: SOFC Applications

    Science.gov (United States)

    Opila, E. J.; Jacobson, N. S.

    2010-01-01

    Solid oxide fuel cell material systems require long term stability in environments containing high-temperature water vapor. Many materials in fuel cell systems react with high-temperature water vapor to form volatile hydroxides which can degrade cell performance. In this paper, experimental methods to characterize these volatility reactions including the transpiration technique, thermogravimetric analysis, and high pressure mass spectrometry are reviewed. Experimentally determined data for chromia, silica, and alumina volatility are presented. In addition, data from the literature for the stability of other materials important in fuel cell systems are reviewed. Finally, methods for predicting material recession due to volatilization reactions are described.

  2. Ecofriendly and Simplified Synthetic Route for Polysulfone-based Solid-State Alkaline Electrolyte Membrane

    Directory of Open Access Journals (Sweden)

    Nittaya Pantamas

    2012-01-01

    Full Text Available Problem statement: Recently the alkaline system for fuel cell enhance their presence because of possibility of no-precious-metal catalyst and low over potential at cathode reaction. The anion exchange membrane for alkaline membrane fuel cell should be a key technology in order to achieve the practical performance as fuel cells. Alkaline anion exchange membranes of high ionic conductivities are made from polysulfone by adding a chloromethyl pendant group to the polysulfone, follow by reacting the chloromethyl group with amine to form quarternary ammonium pendant groups which act as the counter ion for hydroxide anion. Chloromethyl methyl ether, N,N-dimethylformamide and methanol are commonly used as agent for providing excellent conversions, but they are now considered to be carcinogenic. To avoid the use of such hazardous materials, in our work we used paraformaldehyde, chlorotrimethylsilane, N-methylpyrrolidone and ethanol as agent for providing conversion. Approach: Polysulfone (PS was chloromethylated using chlorotrimethylsilane as a chloromethylation reagent, resulting in the formation of Chloromethylated Polysulfone (CMPS. CMPS was converted to a quaternized form using trimethylamine and precipitated into ethanol. The powder was dissolved in N-methylpyrrolidone, followed by aminated with a 25 wt% trimethylamine. Results: The resulting solution was cast onto a flat glass plate and dried in an oven. The membrane was immersed in KOH solution for 24 h to replace the Cl- anion in the polymer with OH-. Conclusion: The swelling behavior of polysulfone-based solid-state alkaline electrolyte membrane was closely related to the degree of water uptake (25 WU%, 7.5 SD% and the ion-exchange capacity was 1.05 mmol g-1, which is sufficient for electrolyte membranes used in alkaline fuel cells.

  3. Corrosion of copper in alkaline chloride environments

    Energy Technology Data Exchange (ETDEWEB)

    King, F. [Integrity Corrosion Consulting Ltd., Calgary (Canada)

    2002-08-01

    The available literature information on the corrosion and electrochemical behaviour of copper in alkaline environments has been reviewed. The purpose of the review was to assess the impact of an alkaline plume from cementitious material on the corrosion behaviour of a copper canister in an SKB-3 type repository. The effect of the evolution of the environmental conditions within the repository have been considered, including the effects of temperature, redox conditions, pore-water salinity and pH. If the pore-water pH increases prior to the establishment of anoxic conditions, the canister surface will passivate as the pore-water pH exceeds a value of {approx} pH 9. Passivation will result from the formation of a duplex Cu{sub 2}O/Cu(OH){sub 2} film. The corrosion potential will be determined by the equilibrium potential for the Cu{sub 2}O/Cu(OH){sub 2} couple under oxic conditions, or by the Cu/Cu{sub 2}O redox couple under anoxic conditions (in the absence of sulphide). Pitting corrosion is only likely to occur early in the evolution of the repository environment, whilst the canister is still relatively cool (<40 deg C), whilst there is still O{sub 2} available to support localised corrosion, and prior to the increase in pore-water pH and salinity. The subsequent increase in canister surface temperature, pore-water pH and salinity, and decrease in O{sub 2} will make pit initiation less likely, although the canister will remain passive provided the pore-water pH is maintained above pH 9. The higher the pore-water pH, the more strongly the canister is passivated and the less likely the surface is to undergo localised attack. If the pore-water salinity increases prior to the increase in pH, there could be a period of active canister corrosion before passivation occurs.Under these circumstances, the corrosion potential will be a true mixed potential, determine by the relative kinetics of Cu dissolution as CuCl{sub 2} - and of the reduction of O{sub 2}. The development

  4. Tunable C2N Membrane for High Efficient Water Desalination

    OpenAIRE

    Yanmei Yang; Weifeng Li; Hongcai Zhou; Xiaoming Zhang; Mingwen Zhao

    2016-01-01

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently re...

  5. Water Impacts of High Solar PV Electricity Penetration

    Energy Technology Data Exchange (ETDEWEB)

    Macknick, Jordan [National Renewable Energy Lab. (NREL), Golden, CO (United States); Cohen, Stuart [National Renewable Energy Lab. (NREL), Golden, CO (United States)

    2015-09-01

    This analysis provides a detailed national and regional description of the water-related impacts and constraints of high solar electricity penetration scenarios in the U.S. in 2030 and 2050. A modified version of the Regional Energy Deployment System (ReEDS) model that incorporates water resource availability and costs as a constraint in each of its 134 Balancing Area (BA) regions was utilized to explore national and regional differences in water use impacts and solar deployment locations under different solar energy cost and water availability scenarios (Macknick et al. 2015). Water resource availability and cost data are from recently completed research at Sandia National Laboratories (Tidwell et al. 2013a). Scenarios analyzed include two business-as-usual solar energy cost cases, one with and one without considering available water resources, and four solar energy cost cases that meet the SunShot cost goals (i.e., $1/watt for utility-scale PV systems), with varying levels of water availability restrictions. This analysis provides insight into the role solar energy technologies have in the broader electricity sector under scenarios of water constraints.

  6. Growth and Tissue Elemental Composition Response of Butterhead Lettuce (Lactuca sativa, cv. Flandria to Hydroponic Conditions at Different pH and Alkalinity

    Directory of Open Access Journals (Sweden)

    Tyler S. Anderson

    2017-07-01

    Full Text Available Biomass and tissue elemental differences were quantified for lettuce grown in deep-water conventional hydroponic conditions at two pH and alkalinity conditions. Nutrient solutions were created using inorganic salts and either reverse osmosis (RO water or municipal water with high alkalinity. Three treatments were evaluated: (a nutrient solution created with reverse osmosis (RO water and maintained at pH 5.8 (H5; (b same as H5 but maintained at pH 7.0 (H7; and (c nutrient solution created using municipal water and maintained at pH 7.0, referred to as HA7. Averaged across three trials, the HA7 and H7 treatments produced 26% less shoot fresh weight (FW than the H5 treatment with an 18% reduction in dry weight (DW. The H5 treatment had the least biomass in root FW and DW. In tissue elemental analyses, both the pH 7.0 treatments showed lower concentrations than H5 in Cu, N, Mo, and Sr, and increased concentrations in Ba, Mg, Na, and Zn. There were no differences in Al, C, Ca, Fe, K, Mn, Ni, P, S, and Si concentrations among treatments (p = 0.05. The results from this experiment can be used to isolate the effects of pH and alkalinity in aquaponic conditions where pH and alkalinity will mimic HA7 conditions.

  7. Titanium Dioxide Volatility in High Temperature Water Vapor

    Science.gov (United States)

    Nguyen, QynhGiao N.

    2008-01-01

    Titanium (Ti) containing materials are of high interest to the aerospace industry due to its high temperature capability, strength, and light weight. As with most metals an exterior oxide layer naturally exists in environments that contain oxygen (i.e. air). At high temperatures, water vapor plays a key role in the volatility of materials including oxide surfaces. This study will evaluate cold pressed titanium dioxide (TiO2) powder pellets at a temperature range of 1400 C - 1200 C in water containing environments to determine the volatile hydroxyl species using the transpiration method. The water content ranged from 0-76 mole% and the oxygen content range was 0-100 mole % during the 20-250 hour exposure times. Preliminary results indicate that oxygen is not a key contributor at these temperatures and the following reaction is the primary volatile equation for all three temperatures: TiO2 (s) + H2O (g) = TiO(OH)2 (g).

  8. Alkaline phosphatase of Physarum polycephalum is insoluble.

    Science.gov (United States)

    Furuhashi, Kiyoshi

    2008-02-01

    The plasmodia of Physarum polycephalum grow as multinucleated cells in the presence of sufficient humidity and nutriment. Under non-illuminating conditions, stresses such as low temperature or high concentrations of salts transform the plasmodia into spherules whereas dehydration induces sclerotization. Some phosphatases including protein phosphatase and acid phosphatase have been purified from the plasmodia, but alkaline phosphatase remains to be elucidated. Phosphatase of the plasmodia, spherules and sclerotia was visualized by electrophoresis gel-staining assay using 5-bromo-4-chloro-3-indolyl phosphate. Insoluble fractions of the sclerotia were abundant in phosphatase activity. The phosphatase which was extracted by nonionic detergent was subjected to column chromatography and preparative electrophoresis. Purified phosphatase showed the highest activity at pH 8.8, indicating that this enzyme belongs to alkaline phosphatase. The apparent molecular mass from sodium dodecyl sulfate-polyacrylamide gel electrophoresis under non-reducing condition was estimated to be 100 kDa whereas that under reducing was 105 kDa. An amount of 1% sodium dodecyl sulfate or 0.5 M NaCl had no effects on the activity although the phosphatase showed heat instability, Mg(2+)-dependency and sensitivity to 2-glycerophosphate or NaF. The extracting conditions and enzymatic properties suggest that this alkaline phosphatase which is in a membrane-bound form plays important roles in phosphate metabolism.

  9. Tunable C2N Membrane for High Efficient Water Desalination

    Science.gov (United States)

    Yang, Yanmei; Li, Weifeng; Zhou, Hongcai; Zhang, Xiaoming; Zhao, Mingwen

    2016-07-01

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently reported graphene-like carbon nitride (g-C2N) monolayer can serve as high efficient filters for water desalination. Taking the advantages of the intrisic nanoporous structure and excellent mechanical properties of g-C2N, high water transparency and strong salt filtering capability have been demonstrated in our simulations. More importantly, the “open” and “closed” states of the g-C2N filter can be precisely regulated by tensile strain. It is found that the water permeability of g-C2N is significantly higher than that reported for graphene filters by almost one order of magnitude. In the light of the abundant family of graphene-like carbon nitride monolayered materials, our results thus offer a promising approach to the design of high efficient filteration architectures.

  10. Tunable C2N Membrane for High Efficient Water Desalination.

    Science.gov (United States)

    Yang, Yanmei; Li, Weifeng; Zhou, Hongcai; Zhang, Xiaoming; Zhao, Mingwen

    2016-07-07

    Water scarcity represents one of the most serious global problems of our time and challenges the advancements in desalination techniques. Although water-filtering architectures based on graphene have greatly advanced the approach to high performance desalination membranes, the controlled-generation of nanopores with particular diameter is tricky and has stunted its wide applications. Here, through molecular dynamic simulations and first-principles calculations, we propose that the recently reported graphene-like carbon nitride (g-C2N) monolayer can serve as high efficient filters for water desalination. Taking the advantages of the intrisic nanoporous structure and excellent mechanical properties of g-C2N, high water transparency and strong salt filtering capability have been demonstrated in our simulations. More importantly, the "open" and "closed" states of the g-C2N filter can be precisely regulated by tensile strain. It is found that the water permeability of g-C2N is significantly higher than that reported for graphene filters by almost one order of magnitude. In the light of the abundant family of graphene-like carbon nitride monolayered materials, our results thus offer a promising approach to the design of high efficient filteration architectures.

  11. Middle Jurassic MORB-type gabbro, high-Mg diorite, calc-alkaline diorite and granodiorite in the Ando area, central Tibet: Evidence for a slab roll-back of the Bangong-Nujiang Ocean

    Science.gov (United States)

    Yan, Haoyu; Long, Xiaoping; Wang, Xuan-Ce; Li, Jie; Wang, Qiang; Yuan, Chao; Sun, Min

    2016-11-01

    Mesozoic intrusions, including MORB-type gabbros, high-Mg diorites, calc-alkaline diorites and granodiorites, were exposed in the Ando microcontinent that is bounded between the Qiangtang and Lhasa terranes. Discoveries of these Mesozoic intrusions have provided new petrogenetic constraints on our understanding of Bangong-Nujiang ocean evolution. Zircon U-Pb dating shows that these intrusions formed in the early-middle Jurassic (174-177 Ma). The gabbros have relatively flat REE distribution patterns, which is analogous to the geochemical features of MORB. Their positive εNd(t) values (εNd(t) = 4.4-5.5) are consistent with those of ophiolites along the Bangong-Nujiang suture zone. These gabbros are also characterized by enrichments of fluid-sensitive elements and negative to positive Nb anomalies, indicative of the influence of subduction-related compositions in their mantle source. These features suggest that the gabbros were most likely originated from asthenosphere-derived melts metasomatized by enriched lithospheric mantle during the upwelling. The high-Mg diorites are characterized by typical features of high compatible elements (MgO = 8.3-10.24 wt%, Cr = 400-547 ppm, Ni = 120-152 ppm), high Mg# (70-74) and low Sr/Y ratios. Their high initial 87Sr/86Sr isotopic ratios and negative εNd(t) values (- 10.5 to - 10.8), together with their sanukitic characteristics, imply that the high-Mg diorites were probably produced by partial melting of mantle peridotites metasomatized by slab-derived melts and aqueous fluids. The calc-alkaline diorites have relatively high MgO (4.04-5.50 wt%), Cr, Ni contents and Mg# (56-59), as well as high (86Sr/87Sr)i ratios and negative εNd(t) values (- 7.5 to - 7.3), suggesting that they were most likely formed by partial melting of the Ando basement rocks with significant input of mantle components. The granodiorites are peraluminous and have higher (86Sr/87Sr)i ratios and more negative εNd(t) values (- 10.6 to - 10.8), similar to

  12. Water and polymer dynamics in highly crosslinked polyamide membranes

    Science.gov (United States)

    Frieberg, Bradley; Chan, Edwin; Tyagi, Madhu; Stafford, Christopher; Soles, Christopher

    Highly crosslinked polyamides for reverse osmosis are the state-of-the-art active material in membranes for desalination. The thin film composite membrane structure that is used commercially has been empirically designed to selectively allow the passage of water molecules and minimize the passage of solutes such as salt. However, due to the large roughness and variability of the polyamide layer, there is a limited understanding of the structure-property relationship for these materials as well as the transport mechanism. To better understand the water transport mechanism we measure the water and polymer dynamics of polyamide membranes using quasi-elastic neutron scattering (QENS). By hydrating the membrane with deuterated water, we are able to isolate the dynamics of the hydrogenated membrane on the pico- and nanosecond time scales. By subsequently hydrating the membranes with hydrogenated water, the QENS measurements on the same times scales reveal information about both the translational and rotational dynamics of water confined within the polyamide membrane. Further understanding of the water diffusion mechanism will establish design rules in which the performance of future membrane materials can be improved.

  13. Determination of perfluorinated chemicals in food and drinking water using high-flow solid-phase extraction and ultra-high performance liquid chromatography/tandem mass spectrometry.

    Science.gov (United States)

    Chang, Ying-Chia; Chen, Wen-Ling; Bai, Fang-Yu; Chen, Pau-Chung; Wang, Gen-Shuh; Chen, Chia-Yang

    2012-01-01

    For this study, we developed methods of determining ten perfluorinated chemicals in drinking water, milk, fish, beef, and pig liver using high-flow automated solid-phase extraction (SPE) and ultra-high performance liquid chromatography/tandem mass spectrometry. The analytes were separated on a core-shell Kinetex C18 column. The mobile phase was composed of methanol and 10-mM N-methylmorpholine. Milk was digested with 0.5 N potassium hydroxide in Milli-Q water, and was extracted with an Atlantic HLB disk to perform automated SPE at a flow rate ranged from 70 to 86 mL/min. Drinking water was directly extracted by the SPE. Solid food samples were digested in alkaline methanol and their supernatants were diluted and also processed by SPE. The disks were washed with 40% methanol/60% water and then eluted with 0.1% ammonium hydroxide in methanol. Suppression of signal intensity of most analytes by matrixes was lower than 50%; it was generally lower in fish and drinking water but higher in liver. Most quantitative biases and relative standard deviations were lower than 15%. The limits of detection for most analytes were sub-nanograms per liter for drinking water and sub-nanograms per gram for solid food samples. This method greatly shortened the time and labor needed for digestion, SPE, and liquid chromatography. This method has been applied to analyze 14 types of food samples. Perfluorooctanoic acid was found to be the highest among the analytes (median at 3.2-64 ng/g wet weight), followed by perfluorodecanoic acid (0.7-25 ng/g) and perfluorododecanoic acid (0.6-15 ng/g).

  14. Salt—Water Dynamics in Highly Salinized Topsoil of Salt—Affected Soil During Water Infiltration

    Institute of Scientific and Technical Information of China (English)

    WANGXUE-FENG; YOUWEN-RUI; 等

    1991-01-01

    Continuous monitoring of salt and water movement in the soil profile of highly salinized topsoil under steadystate infiltration was conducted.It gives that salt and water dynamics during convection-diffusion period can be divided into three stages:1.formation of a salt peak,2.the salt peak moving downwards till the appearance of the summit of the salt peak,3.the salt peak moving further downwards with the peak value decreasing.Results show that the maximum salt peak appears at the same depth if soil texture and outflow condition are the same.Factors affecting salt and water movement and ion components in the outflow solution underinfiltration are discussed.

  15. High performance of alkaline anion-exchange membranes based on chitosan/poly (vinyl) alcohol doped with graphene oxide for the electrooxidation of primary alcohols

    OpenAIRE

    García Cruz, Leticia; Casado Coterillo, Clara; Irabien Gulías, José Ángel; Montiel Leguey, Vicente; Iniesta Valcárcel, Jesús

    2016-01-01

    Mixed matrix membranes (MMM) based on chitosan (CS) and poly (vinyl) alcohol (PVA) with a 50:50 w/w ratio doped with graphene oxide (GO) are prepared by solution casting and characterized by scanning electron microscopy (SEM), X-ray diffraction (XRD), thermogravimetric analysis (TGA), water uptake, alcohol permeability, ion exchange capacity (IEC) and OH− conductivity measurements. The SEM analysis revealed a dense MMM where the GO nanosheets were well dispersed over the entire polymer matrix...

  16. Well successfully drilled with high performance water-based fluid: Santos Basins, offshore Brazil

    Energy Technology Data Exchange (ETDEWEB)

    Fornasier, Frank C.; Luzardo, Juan P. [Halliburton Company, Houston, TX (United States); Bishnoi, M.L. [Oil and Natural Gas Corporation Ltda. (ONGC), Dehradun (India)

    2012-07-01

    Santos Basin is a 352,260 square kilometers (136,010 sq mi) offshore pre-salt basin. It is located in the South Atlantic Ocean, some 300 kilometers (190 mi) South East of Sao Paulo, Brazil. One of the largest Brazilian sedimentary basins, it is the site of several recent significant oil fields, including Tupi and Jupiter. The criteria for drilling fluid selection is based upon the following factors: maximum cost efficiency, environmental friendliness, optimum borehole stability, and ease of use. The recommended drilling fluid formulation takes into consideration the experience gained during the drilling of wells in the Santos Basin area. The operator wanted to use a high-performance water-based fluid (HPWBF) that could provide shale inhibition, wellbore stability, lubricity and improved rate of penetration (ROP) as an alternative to synthetic-based drilling fluids to present value in terms of economics and environmental friendliness. The HPWBF consists of three synergistic products: a hydration suppressant, a dispersion suppressant, and an accretion suppressant. The system is formulated based on customized solutions for managing the clay reactivity. High logistics costs require drilling fluids that can be prepared with sea water and discharged to the sea without environmental impact. The HPWBF is a clay-free system designed for maximum shale inhibition in highly reactive formations. The system can provide wellbore stability, high rates of penetration, and acceptable rheological properties over a wide range of temperatures, with the added benefit of allowing cuttings discharge based upon water base environmental restrictions. Since no oil is used in the formulation, the HPWBF eliminates the need for cuttings processing and monitoring equipment, and exceeds the environmental requirements by achieving an LC50 value of 345,478.22 ppm in comparison with the minimum requirement (LC50 > 30,000 ppm in 96 hr), permitting use and discharge to the sea. The HPWBF selected

  17. 2nd Generation Alkaline Electrolysis

    DEFF Research Database (Denmark)

    Yde, Lars; Kjartansdóttir, Cecilia Kristin; Allebrod, Frank;

    This report provides the results of the 2nd Generation Alkaline Electrolysis project which was initiated in 2008. The project has been conducted from 2009-2012 by a consortium comprising Århus University Business and Social Science – Centre for Energy Technologies (CET (former HIRC)), Technical...

  18. Beryllium-10 concentrations in water samples of high northern latitudes

    Energy Technology Data Exchange (ETDEWEB)

    Strobl, C.; Eisenhauer, A.; Schulz, V.; Baumann, S.; Mangini, A. [Heidelberger Akademie der Wissenschaften, Heildelberg (Germany); Kubik, P.W. [Paul Scherrer Inst. (PSI), Villigen (Switzerland)

    1997-09-01

    {sup 10}Be concentrations in the water column of high northern latitudes were not available so far. We present different {sup 10}Be profiles from the Norwegian-Greenland Sea, the Arctic Ocean, and the Laptev Sea. (author) 3 fig., 3 refs.

  19. Optical Spectra of the High Voltage Erosive Water Discharge

    CERN Document Server

    Pirozerski, A L

    2008-01-01

    In the present paper kinetics of emission spectra of the high voltage erosive water discharge at near ultraviolet and visible spectral ranges has been investigated. Obtained results show a similarity of physical properties of this discharge (and of corresponding plasmoids) to that of some other types of erosional discharges which also result in the formation of dust-gas fireballs.

  20. Major vascular injury from high-pressure water jet.

    Science.gov (United States)

    Harvey, R L; Ashley, D A; Yates, L; Dalton, M L; Solis, M M

    1996-01-01

    High-pressure water jets are used in industry as a cleaning and cutting tool. Penetrating injuries by these devices can produce minimal external evidence of extensive internal damage. We report a literature review and the case of a limb-threatening injury to the lower extremity caused by such a device.

  1. A continuous high resolution water isotope dataset to constrain Alpine water balance estimates

    Science.gov (United States)

    Michelon, Anthony; Ceperley, Natalie; Beria, Harsh; Larsen, Josh; Schaefli, Bettina

    2017-04-01

    Water delivered from Alpine environments is a crucial resource for many countries around the world. Precipitation accumulated during cold seasons as snowpack or glaciers is often an important source of water during warm (dry) season but also a dominant contributor to the annual water balance. In Switzerland, water from high Alpine, glacier-fed catchments provides a large portion of both the hydroelectric power and water supply. However, large uncertainties regarding changes in glacier volume and snow accumulation can have significant impacts on hydrologic, biologic, physical and economic understanding, modeling, and predictions. Accurately quantifying these water resources is therefore an on-going challenge. Given the well-known difficulty observing solid precipitation (snowfall), it can be assumed that most of the uncertainty in water balance estimates for snow-dominated environments is due to: 1) Poor measurement of winter precipitation and 2) A poor estimation of timing and amount of snow melt. It is noteworthy that the timing of melt plays a crucial role even for annual water balance estimates since it might significantly influence melt runoff flow paths and thereby groundwater recharge. We use continuous monitoring of water stable isotopes over the entire annual cycle in an Alpine catchment to shed light on how such observations can constrain water balance estimates. The selected catchment is the experimental Vallon de Nant catchment in the Vaud Alps of Switzerland, where detailed hydrologic observations have recently started in addition to the existing vegetation and soil investigations. The Vallon de Nant (14 km2, and an altitude ranging from 1200 to 3051 m) is a narrow valley that accumulates large amounts of snow during winter. In spring and summer, the river discharge is mainly supplied by snowmelt, with additional inputs from a small glacier and rainfall. Continuous monitoring of water stable isotopes (δO18 and δD) is combined with measurements of

  2. Experimental Study on High Electrical Breakdown of Water Dielectric

    Institute of Scientific and Technical Information of China (English)

    Zhang Zicheng; Zhang Jiande; Yang Jianhua

    2005-01-01

    By means of a coaxial apparatus, pressurized water breakdown experiments with microsecond charging have been carried out with different surface roughness of electrodes and different ethylene glycol concentrations of ethylene glycol/water mixture. The experimental results about the breakdown stress and the effective time are presented. The breakdown stress is normalized to the situation that the effective time is transformed to 1 μs and analyzed. The conclusions are as follows: (1) the breakdown stress formula is modified to E = 0.561MA-1/10t-1eff/NP1/8; (2)the coefficient M is significantly increased by surface polishing and ethylene glycol additive; (3) it is accumulative for the capacity of improving electrical breakdown strength for surface polishing,ethylene glycol additive, and pressurization, of which pressurization is the most effective method;(4) the highest stress of 235.5 kV/cm is observed in ethylene glycol/water mixture with an ethylene glycol concentration of 80% at a hydrostatic pressure of 1215.9 kPa and is about one time greater than that in pure water at constant pressure; (5) for pressurization and surface pohshing,the primary mechanism to improve the breakdown strength of water dielectric is the increase in the breakdown time delay. Research results indicate great potential in the application of the high power pulse conditioning system of water dielectric.

  3. Glycol-Substitute for High Power RF Water Loads

    CERN Document Server

    Ebert, Michael

    2005-01-01

    In water loads for high power rf applications, power is dissipated directly into the coolant. Loads for frequencies below approx. 1GHz are ordinarily using an ethylene glycol-water mixture as coolant. The rf systems at DESY utilize about 100 glycol water loads with powers ranging up to 600kW. Due to the increased ecological awareness, the use of glycol is now considered to be problematic. In EU it is forbidden to discharge glycol into the waste water system. In case of cooling system leakages one has to make sure that no glycol is lost. Since it is nearly impossible to avoid any glycol loss in large rf systems, a glycol-substitute was searched for and found. The found sodium-molybdate based substitute is actually a additive for corrosion protection in water systems. Sodium-molybdate is ecologically harmless; for instance, it is also used as fertilizer in agriculture. A homoeopathic dose of 0.4% mixed into deionised water gives better rf absorption characteristics than a 30% glycol mixture. The rf coolant feat...

  4. Acid transformation of bauxite residue: Conversion of its alkaline characteristics.

    Science.gov (United States)

    Kong, Xiangfeng; Li, Meng; Xue, Shengguo; Hartley, William; Chen, Chengrong; Wu, Chuan; Li, Xiaofei; Li, Yiwei

    2017-02-15

    Bauxite residue (BR) is a highly alkaline solid hazardous waste produced from bauxite processing for alumina production. Alkaline transformation appears to reduce the environmental risk of bauxite residue disposal areas (BRDAs) whilst potentially providing opportunities for the sustainable reuse and on-going management of BR. Mineral acids, a novel citric acid and a hybrid combination of acid-gypsum treatments were investigated for their potential to reduce residue pH and total alkalinity and transform the alkaline mineral phase. XRD results revealed that with the exception of andradite, the primary alkaline solid phases of cancrinite, grossular and calcite were transformed into discriminative products based on the transformation used. Supernatants separated from BR and transformed bauxite residue (TBR) displayed distinct changes in soluble Na, Ca and Al, and a reduction in pH and total alkalinity. SEM images suggest that mineral acid transformations promote macro-aggregate formation, and the positive promotion of citric acid, confirming the removal or reduction in soluble and exchangeable Na. NEXAFS analysis of Na K-edge revealed that the chemical speciation of Na in TBRs was consistent with BR. Three acid treatments and gypsum combination had no effect on Na speciation, which affects the distribution of Na revealed by sodium STXM imaging. Copyright © 2016 Elsevier B.V. All rights reserved.

  5. HIGH-PURITY WATER PRODUCTION BY RO/EDI SYSTEM

    Institute of Scientific and Technical Information of China (English)

    2001-01-01

    @@ Electrodeionization(EDI),also known as continuous deionization(CDI)and packed-cell electrodialysis,is a novel hybrid separation process combining ion-exchange resin with ion-exchange membrane in one unit.The EDI process was discovered in the 1950's[1,2]in laboratory,the first commercial apparatus for the production of high-purity water was available in 1987[3].Now the EDI technology has been found and will be continuously found its great applications in many engineering fields. In EDI,the dilute compartments are filled with mixed-bed ion-exchange resins,which enhance the transport to the membranes under the force of a direct current.The ion transport is almost entire through the ion-exchange resins and is not effected through the water.Under certain conditions,water-splitting reaction occurs in the dilute chambers and then the relative high concentrations of H+ and OH- are able to regenerate the resins continuously, With the unique “electroregeneration",the EDI unit can be considered as a mixed-bed ion-exchange column with continuous regeneration.and therefore is capable of deep deionization.Comparing with electrodialysis and ion exchange respectively,EDI has put up much superiority in water desalination. In our experiments,the processes for production of high-purity water from tap water are consisted of pretreatment (with ultrafiltration,active carbon and 10 μm-filtration),RO and EDI.

  6. Alkaline Rocks and Geodynamics

    OpenAIRE

    BONIN, Bernard

    1998-01-01

    Origin of A-type alkali feldspar granites is currently the subject of a world-wide debate. Contrasting hypotheses have been proposed, which range from an entirely crustal origin to an almost complete mantle derivation. A-type alkali feldspar granites belong to either unimodal granite (rhyolite)-dominated association, or bimodal gabbro (basalt)-granite (rhyolite) suite. It is argued that (i) the ultimate mantle origin of basic to intermediate rocks is beyond doubt, (ii) highly evolved felsi...

  7. Isolation, identification and optimization of alkaline protease production by Candida viswanathii

    Directory of Open Access Journals (Sweden)

    Mandana Lotfi

    2014-03-01

    Conclusion: Due to the high demand for industrial enzymes in the Country and the high activity of alkaline proteases produced by strain. It seems that the native strain can achieve high production of alkaline proteases.These native strains could be resulted in the independence of our country in industrial enzymes production.

  8. Ultra-high pressure water jet: Baseline report; Greenbook (chapter)

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The ultra-high pressure waterjet technology was being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The ultra-high pressure waterjet technology acts as a cutting tool for the removal of surface substrates. The Husky{trademark} pump feeds water to a lance that directs the high pressure water at the surface to be removed. The technologies being tested for concrete decontamination are targeted for alpha contamination. The safety and health evaluation during the human factors assessment focused on two main areas: noise and dust.

  9. Water Temperature Dynamics in High Arctic River Basins

    Science.gov (United States)

    Blaen, P. J.; Hannah, D. M.; Brown, L. E.; Milner, A. M.

    2012-04-01

    Despite the high sensitivity of polar regions to climate change, and the strong influence of temperature upon ecosystem processes, contemporary understanding of water temperature dynamics in Arctic river systems is limited. This research gap is addressed by exploring high-resolution water column thermal regimes for glacier-fed and non-glacial rivers at eight sites across Svalbard during the 2010 melt season. Mean water column temperatures in glacier-fed rivers (0.3 - 3.2 °C) were the lowest and most thermally-stable near the glacier terminus but increased downstream (0.7 - 2.3 °C km-1). Non-glacial rivers, where discharge was sourced primarily from snowmelt, were warmer (mean 2.9 - 5.7 °C) and more variable, indicating increased water residence times in shallow alluvial zones with increased potential for atmospheric influence. Mean summer water temperature and the magnitude of daily thermal variation were similar to those of Alaskan rivers but low at all sites when compared to alpine glacierized environments at lower latitudes. Thermal regimes were strongly correlated (pgeomorphological features (e.g. channel morphology). These results provide insight into the potential changes in high-latitude river systems in the context of projected warming in polar regions. We hypothesise warmer and more variable temperature regimes may prevail in future as the proportion of bulk discharge sourced from glacial meltwater declines and rivers undergo a progressive shift towards snow- and groundwater sources. Importantly, such changes could have implications for species diversity and abundance in benthic communities and influence rates of ecosystem functioning in high-latitude aquatic systems.

  10. Studies on Fast Remediation of Soda Meadow Alkaline Soil

    Institute of Scientific and Technical Information of China (English)

    ZHOU Lianren; SUN Yankun; LI Dawei

    2010-01-01

    Researches on models of remediation quickly in soda meadow alkaline soil, and dynamic variation of water-salt in saline soil of Zhaozhou County were studied systematically from 2001 to 2006. Realize the vegetation cover of those years through the artificial planting, mixed seeding lymc grass (Elymus dahuricus Turcz) and melilot in the mode of rotary tillage and deep loosening in lower and medium saline soils. The results showed that there was remarkable relationship between net evaporation (difference of precipitation and evaporation) and total salt content in the soil. The net evaporation could be used as a new method to forecast the dynamics variation of salt to ensure the pasture optimum sowing time. Realize the autumnal vegetation cover of those years through direct planting on the bourgeon layer of soda meadow alkaline soil, on the other hand, the covered pasture made the function of restraining salt and alkaline content to realize the biology reverse succession quickly. Forage seeds were seeded directly on the seeding bed of soda alkaline meadow at the end of July. In fall of the same year, a certain amount of biomass was obtained. The model, which has remarkable economical efficiency and use widely, represented the innovative model for the fast vegetation restoration on the soda alkaline meadow soil.

  11. Water Vapor-Mediated Volatilization of High-Temperature Materials

    Science.gov (United States)

    Meschter, Peter J.; Opila, Elizabeth J.; Jacobson, Nathan S.

    2013-07-01

    Volatilization in water vapor-containing atmospheres is an important and often unexpected mechanism of degradation of high-temperature materials during processing and in service. Thermodynamic properties data sets for key (oxy)hydroxide vapor product species that are responsible for material transport and damage are often uncertain or unavailable. Estimation, quantum chemistry calculation, and measurement methods for thermodynamic properties of these species are reviewed, and data judged to be reliable are tabulated and referenced. Applications of water vapor-mediated volatilization include component and coating recession in turbine engines, oxidation/volatilization of ferritic steels in steam boilers, chromium poisoning in solid-oxide fuel cells, vanadium transport in hot corrosion and degradation of hydrocracking catalysts, Na loss from Na β"-Al2O3 tubes, and environmental release of radioactive isotopes in a nuclear reactor accident or waste incineration. The significance of water vapor-mediated volatilization in these applications is described.

  12. The High-Altitude Water Cherenkov Observatory: First Light

    Science.gov (United States)

    Weisgarber, Thomas

    2013-04-01

    The High-Altitude Water Cherenkov (HAWC) Observatory is under construction at Sierra Negra in the state of Puebla in Mexico. Operation began in September 2012, with the first 30 out of the final 300 water Cherenkov detectors deployed and in data acquisition. The HAWC Observatory is designed to record particle air showers from gamma rays and cosmic rays with TeV energies. Though the detector is only 10% complete, HAWC is already the world's largest water Cherenkov detector in the TeV band. In this presentation, I will summarize the performance of the detector to date and discuss preliminary observations of cosmic-ray and gamma-ray sources. I will also describe deployment plans for the remainder of the detector and outline prospects for TeV observations in the coming year.

  13. Efficacy of alkaline washing for the decontamination of orange fruit surfaces inoculated with Escherichia coli.

    Science.gov (United States)

    Pao, S; Davis, C L; Kelsey, D F

    2000-07-01

    The effectiveness of washing treatments to decontaminate orange fruit surfaces inoculated with Escherichia coli was evaluated. Washing on roller brushes with fruit cleaners or sanitizers followed by potable water rinse reduced E. coli by 1.9 to 3.5 log cycles. Prewetting fruit for 30 s before washing provided no significant benefit in most cases. Additional sanitizing treatments either with chlorine or acid sanitizers did not enhance the results of alkaline washing. In general, high pH washing solutions (pH 11.8) applied with an adequate spray volume effectively reduced the surface contamination of fruit that lowered the microbial load of fresh juice as well.

  14. Optimization of tetravalent manganese feroxyhyte's negative charge density: A high-performing mercury adsorbent from drinking water.

    Science.gov (United States)

    Kokkinos, E; Simeonidis, K; Pinakidou, F; Katsikini, M; Mitrakas, M

    2017-01-01

    This study demonstrates an optimization procedure for the development of an Hg-specified adsorbent able to comply with the regulation limit for drinking water of 1μg/L. On this purpose, the synthesis of Mn(IV)-feroxyhyte was modified to achieve high negative charge density by combining alkaline and extreme oxidizing conditions. In particular, precipitation of FeSO4 at pH9 and excess of KMnO4 follows a very fast nucleation step providing a product with very small nanocrystal size (1-2nm), high specific surface area (300m(2)/g) and maximum negative charge density (1.8mmol H(+)/g). The adsorbent was validated for Hg removal in batch experiments and column tests using natural-like water indicating an adsorption capacity as high as 2.5μg/mg at equilibrium concentration 1μg/L under reliable conditions of application. Importantly, the adsorption is an exothermic spontaneous process, resulting in the formation of inner sphere complexes by sharing both A-type and B-type oxygen atoms with the metal surface octahedral as revealed by the X-ray absorption fine structure results. Copyright © 2016 Elsevier B.V. All rights reserved.

  15. Record-high specific conductance and water temperature in San Francisco Bay during water year 2015

    Science.gov (United States)

    Work, Paul; Downing-Kunz, Maureen; Livsey, Daniel

    2017-02-22

    The San Francisco estuary is commonly defined to include San Francisco Bay (bay) and the adjacent Sacramento–San Joaquin River Delta (delta). The U.S. Geological Survey (USGS) has operated a high-frequency (15-minute sampling interval) water-quality monitoring network in San Francisco Bay since the late 1980s (Buchanan and others, 2014). This network includes 19 stations at which sustained measurements have been made in the bay; currently, 8 stations are in operation (fig. 1). All eight stations are equipped with specific conductance (which can be related to salinity) and water-temperature sensors. Water quality in the bay constantly changes as ocean tides force seawater in and out of the bay, and river inflows—the most significant coming from the delta—vary on time scales ranging from those associated with storms to multiyear droughts. This monitoring network was designed to observe and characterize some of these changes in the bay across space and over time. The data demonstrate a high degree of variability in both specific conductance and temperature at time scales from tidal to annual and also reveal longer-term changes that are likely to influence overall environmental health in the bay.In water year (WY) 2015 (October 1, 2014, through September 30, 2015), as in the preceding water year (Downing-Kunz and others, 2015), the high-frequency measurements revealed record-high values of specific conductance and water temperature at several stations during a period of reduced freshwater inflow from the delta and other tributaries because of persistent, severe drought conditions in California. This report briefly summarizes observations for WY 2015 and compares them to previous years that had different levels of freshwater inflow.

  16. Ultra-high pressure water jet: Baseline report

    Energy Technology Data Exchange (ETDEWEB)

    NONE

    1997-07-31

    The ultra-high pressure waterjet technology was being evaluated at Florida International University (FIU) as a baseline technology. In conjunction with FIU`s evaluation of efficiency and cost, this report covers the evaluation conducted for safety and health issues. It is a commercially available technology and has been used for various projects at locations throughout the country. The ultra-high pressure waterjet technology acts as a cutting tool for the removal of surface substrates. The Husky{trademark} pump feeds water to a lance that directs the high pressure water at the surface to be removed. The safety and health evaluation during the testing demonstration focused on two main areas of exposure. These were dust and noise. The dust exposure was found to be minimal, which would be expected due to the wet environment inherent in the technology, but noise exposure was at a significant level. Further testing for noise is recommended because of the outdoor environment where the testing demonstration took place. In addition, other areas of concern found were arm-hand vibration, ergonomics, heat stress, tripping hazards, electrical hazards, lockout/tagout, fall hazards, slipping hazards, hazards associated with the high pressure water, and hazards associated with air pressure systems.

  17. The condensation of steam from steam-water mixture on water jets at high pressure

    Science.gov (United States)

    Somova, E. V.; Kisina, V. I.; Shvarts, A. L.; Kolbasnikov, A. V.; Kanishchev, V. P.

    2009-01-01

    A physical model for condensation of steam in water flow at high pressure is developed, and analytical dependences for calculating heat transfer are obtained, in particular as applied to the operation of a direct-contact feedwater heater for a new-generation reactor plant with lead coolant.

  18. 秦皇岛近海褐潮高发区浮游植物的碱性磷酸酶活性分析%Alkaline phosphatase activity of phytoplankton in Qin-huangdao coastal waters with frequent brown tide occurrences

    Institute of Scientific and Technical Information of China (English)

    刘晓红; 覃仙玲; 蔡阳扬; 欧林坚; 吕颂辉

    2016-01-01

    Alkaline phosphatase (AP) is a type of ectoenzyme that is expressed by phytoplankton under phosphorus (P) stress states and can hydrolyze dissolved organic P (DOP). AP has been widely used to indicate the P stress status of phytoplankton in the sea. In this study, the AP activity (APA) of phytoplankton during the brown tide of Aureococcus anophagefferens that occurred near the coastal waters of Qinghuangdao was investigated in July 2013. The P status of phytoplankton and the capability of phytoplankton in using DOP during the bloom were analyzed. The results show that the density of A. anophagefferens was as high as 108 cells/L when the bloom occurred in the coastal area of Qinhuangdao. DOP was the main P source for phytoplankton growth. The densities of A. ano-phagefferens showed positive correlations with NO3−, DOP, dissolved inorganic P, and so forth. Phytoplankton ex-pressed abundant AP, and the average APA in water reached as high as 217.72 nmol/(µg·h)chla ± 90.86 nmol/(µg·h)chla (350.44 nmol/(L·h) ± 130.57 nmol/(L·h)). APA increased significantly with phytoplankton biomass. Our results suggest that A. anophagefferens experienced severe P stress or even P limitation when the brown tide occurred. The bioavailability of P, particularly DOP, may play a key role in the occurrence and persistence of the brown tide of A. anophagefferens in the coastal waters of Qinhuangdao.%碱性磷酸酶(Alkaline phosphatase, AP)是浮游植物在磷胁迫状态下表达的一种水解有机磷源的胞外酶,可用于指示海区浮游植物的磷胁迫状态。本研究于2013年7月,对秦皇岛近海抑食金球藻(Aureococcus anophagefferens)褐潮发生期间浮游植物的碱性磷酸酶活性(AP activity, APA)进行研究,结合其他理化参数,分析藻华发生时浮游植物的磷营养状态及其对海水中磷源的水解与利用情况。结果表明,褐潮发生时,抑食金球藻细胞密度高达108个/L,溶解有机磷(Dissolved organic phosphorus

  19. A high resolution water level forecast for the German Bight

    Science.gov (United States)

    Niehüser, Sebastian; Dangendorf, Sönke; Arns, Arne; Jensen, Jürgen

    2016-04-01

    Many coastal regions worldwide are potentially endangered by storm surges which can cause disastrous damages and loss of life. Due to climate change induced sea level rise, an accumulation of such events is expected by the end of the 21th century. Therefore, advanced storm surge warnings are needed to be prepared when another storm surge hits the coast. In the shallow southeastern North Sea these storm surge warnings are nowadays routinely provided for selected tide gauge locations along a coastline through state-of-the-art forecast systems, which are based on a coupled system of empirical tidal predictions and numerical storm surge forecasts. Along the German North Sea coastline, the Federal Maritime and Hydrographic Agency in cooperation with the German Weather Service is responsible for the storm surge warnings. They provide accurate, high frequency and real-time water level forecasts for up to six days ahead at selected tide gauge sites via internet, telephone and broadcast. Since water levels along the German North Sea coastline are dominated by shallow water effects and a very complex bathymetric structure of the seabed, the pointwise forecast is not necessarily transferable to un-gauged areas between the tide gauges. Here we aim to close this existing gap and develop water level forecasts with a high spatial (continuously with a resolution of at least 1 kilometer) as well as a high temporal (at least 15-minute values) resolution along the entire German North Sea coastline. We introduce a new methodology for water level forecasts which combines empirical or statistical and numerical models. While the tidal forecast is performed by non-parametric interpolation techniques between un-gauged and gauged sites, storm surges are estimated on the basis of statistical/empirical storm surge formulas taken from a numerical model hindcast. The procedure will be implemented in the operational mode forced with numerical weather forecasts.

  20. ICT Solutions for Highly-Customized Water Demand Management Strategies

    Science.gov (United States)

    Giuliani, M.; Cominola, A.; Castelletti, A.; Fraternali, P.; Guardiola, J.; Barba, J.; Pulido-Velazquez, M.; Rizzoli, A. E.

    2016-12-01

    The recent deployment of smart metering networks is opening new opportunities for advancing the design of residential water demand management strategies (WDMS) relying on improved understanding of water consumers' behaviors. Recent applications showed that retrieving information on users' consumption behaviors, along with their explanatory and/or causal factors, is key to spot potential areas where targeting water saving efforts, and to design user-tailored WDMS. In this study, we explore the potential of ICT-based solutions in supporting the design and implementation of highly customized WDMS. On one side, the collection of consumption data at high spatial and temporal resolutions requires big data analytics and machine learning techniques to extract typical consumption features from the metered population of water users. On the other side, ICT solutions and gamifications can be used as effective means for facilitating both users' engagement and the collection of socio-psychographic users' information. This latter allows interpreting and improving the extracted profiles, ultimately supporting the customization of WDMS, such as awareness campaigns or personalized recommendations. Our approach is implemented in the SmartH2O platform and demonstrated in a pilot application in Valencia, Spain. Results show how the analysis of the smart metered consumption data, combined with the information retrieved from an ICT gamified web user portal, successfully identify the typical consumption profiles of the metered users and supports the design of alternative WDMS targeting the different users' profiles.

  1. Experiments on aerosol removal by high-pressure water spray

    Energy Technology Data Exchange (ETDEWEB)

    Corno, Ada del, E-mail: delcorno@rse-web.it [RSE, Power Generation Technologies and Materials Dept, via Rubattino 54, I-20134 Milano (Italy); Morandi, Sonia, E-mail: morandi@rse-web.it [RSE, Power Generation Technologies and Materials Dept, via Rubattino 54, I-20134 Milano (Italy); Parozzi, Flavio, E-mail: parozzi@rse-web.it [RSE, Power Generation Technologies and Materials Dept, via Rubattino 54, I-20134 Milano (Italy); Araneo, Lucio, E-mail: lucio.araneo@polimi.it [Politecnico di Milano, Department of Energy, via Lambruschini 4A, I-20156 Milano (Italy); CNR-IENI, via Cozzi 53, I-20125 Milano (Italy); Casella, Francesco, E-mail: francesco2.casella@mail.polimi.it [Politecnico di Milano, Department of Energy, via Lambruschini 4A, I-20156 Milano (Italy)

    2017-01-15

    Highlights: • Experimental research to measure the efficiency of high-pressure sprays in capturing aerosols if applied to a filtered containment venting system in case of severe accident. • Cloud of monodispersed SiO{sub 2} particles with sizes 0.5 or 1.0 μm and initial concentration in the range 2–90 mg/m{sup 3}. • Carried out in a chamber 0.5 × 1.0 m and 1.5 m high, with transparent walls equipped with a high pressure water spray with single nozzle. • Respect to low-pressure sprays, removal efficiency turned out significant: the half-life for 1 μm particles with a removal high-pressure spray system is orders of magnitude shorter than that with a low-pressure sprays system. - Abstract: An experimental research was managed in the framework of the PASSAM European Project to measure the efficiency of high-pressure sprays in capturing aerosols when applied to a filtered containment venting system in case of severe accident. The campaign was carried out in a purposely built facility composed by a scrubbing chamber 0.5 × 1.0 m and 1.5 m high, with transparent walls to permit the complete view of the aerosol removal process, where the aerosol was injected to form a cloud of specific particle concentration. The chamber was equipped with a high pressure water spray system with a single nozzle placed on its top. The test matrix consisted in the combination of water pressure injections, in the range 50–130 bar, on a cloud of monodispersed SiO{sub 2} particles with sizes 0.5 or 1.0 μm and initial concentration ranging between 2 and 99 mg/m{sup 3}. The spray was kept running for 2 min and the efficiency of the removal was evaluated, along the test time, using an optical particle sizer. With respect to low-pressure sprays, the removal efficiency turned out much more significant: the half-life for 1 μm particles with a removal high-pressure spray system is orders of magnitude shorter than that with a low-pressure spray system. The highest removal rate was

  2. The inner mitochondrial membrane has aquaporin-8 water channels and is highly permeable to water.

    Science.gov (United States)

    Calamita, Giuseppe; Ferri, Domenico; Gena, Patrizia; Liquori, Giuseppa E; Cavalier, Annie; Thomas, Daniel; Svelto, Maria

    2005-04-29

    Mitochondria are remarkably plastic organelles constantly changing their shape to fulfil their various functional activities. Although the osmotic movement of water into and out of the mitochondrion is central for its morphology and activity, the molecular mechanisms and the pathways for water transport across the inner mitochondrial membrane (IMM), the main barrier for molecules moving into and out of the organelle, are completely unknown. Here, we show the presence of a member of the aquaporin family of water channels, AQP8, and demonstrate the strikingly high water permeability (Pf) characterizing the rat liver IMM. Immunoblotting, electron microscopy, and biophysical studies show that the largest mitochondria feature the highest AQP8 expression and IMM Pf. AQP8 was also found in the mitochondria of other organs, whereas no other known aquaporins were seen. The osmotic water transport of liver IMM was partially inhibited by the aquaporin blocker Hg2+, while the related activation energy remained low, suggesting the presence of a Hg2+-insensitive facilitated pathway in addition to AQP8. It is suggested that AQP8-mediated water transport may be particularly important for rapid expansions of mitochondrial volume such as those occurring during active oxidative phosphorylation and those following apoptotic signals.

  3. High Speed Water Sterilization Using One-Dimensional Nanostructures

    KAUST Repository

    Schoen, David T.

    2010-09-08

    The removal of bacteria and other organisms from water is an extremely important process, not only for drinking and sanitation but also industrially as biofouling is a commonplace and serious problem. We here present a textile based multiscale device for the high speed electrical sterilization of water using silver nanowires, carbon nanotubes, and cotton. This approach, which combines several materials spanning three very different length scales with simple dying based fabrication, makes a gravity fed device operating at 100000 L/(h m2) which can inactivate >98% of bacteria with only several seconds of total incubation time. This excellent performance is enabled by the use of an electrical mechanism rather than size exclusion, while the very high surface area of the device coupled with large electric field concentrations near the silver nanowire tips allows for effective bacterial inactivation. © 2010 American Chemical Society.

  4. Unexpected response of high Alpine Lake waters to climate warming.

    Science.gov (United States)

    Thies, Hansjörg; Nickus, Ulrike; Mair, Volkmar; Tessadri, Richard; Tait, Danilo; Thaler, Bertha; Psenner, Roland

    2007-11-01

    Over the past two decades, we have observed a substantial rise in solute concentration at two remote high mountain lakes in catchments of metamorphic rocks in the European Alps. At Rasass See, the electrical conductivity increased 18-fold. Unexpectedly high nickel concentrations at Rasass See, which exceeded the limit in drinking water by more than 1 order of magnitude, cannot be related to catchment geology. We attribute these changes in lake water quality to solute release from the ice of an active rock glacier in the catchment as a response to climate warming. Similar processes occurred at the higher elevation lake Schwarzsee ob Sölden, where electrical conductivity has risen 3-fold during the past two decades.

  5. Alkaline diagenesis and its influence on a reservoir in the Biyang depression

    Institute of Scientific and Technical Information of China (English)

    QIU; Longwei; (邱隆伟); JIANG; Zaixing; (姜在兴); CAO; Yingchang; (操应长); QIU; Ronghua(邱荣华); CHEN; Wenxue; (陈文学); &; TU; Yangfa; (涂阳发)

    2002-01-01

    Alkaline diagnesis is a diagenetic process that a reservoir undergoes under an alkaline environment. Because of the influence of alkaline formation water, the most typical characteristics of diagnesis is that quartz is obviously dissolved, feldspar is massively enlarged, and less late carbonate cement is formed in the evolution of carbonate minerals. With the decrease of the alkalinity of the formation water in diagenesis, the quartz overgrowths become common. The change in the chemical characteristics of the formation water leads to a more complex distribution of reservoir porosity at different depths than that of the secondary porosity formed by classical acidic water. It also makes the B stage of early diagenesis the important development period of secondary porosity.

  6. High hydrogen loading of thin palladium wires through alkaline earth carbonates' precipitation on the cathodic surface - evidence of a new phase in the Pd-H system

    Energy Technology Data Exchange (ETDEWEB)

    Celani, F.; Spallone, A.; Di Gioacchino, D. [Istituto Nazionale di Fisica Nucleare, Laboratori Nazionali di Frascati, Frascati, RM (Italy); Marini, P.; Di Stefano, V.; Nakamura, M. [EURESYS, Rome (Italy); Pace, S. [Salerno Univ., Salerno (Italy). Dept. of Physics, Istituto Nazionale per la Fisica della Materia; Mancini, A. [ORIM S.r.l., Piediripa, MC (Italy); Tripodi, P. [Stanford Research Institut International, Stanford, CA (United States)

    2000-07-01

    A new protocol for the electrolytic loading of hydrogen (H) in thin palladium (Pd) wires has been developed. In order to increase the cathodic overvoltage, which is known to be the main parameter capable to enhance the electrolytic H loading of Pd, the catalytic action of the Pd surface versus H-H recombination has been strongly reduced by precipitation of a thin layer of alkaline-earth carbonates on the cathode. A set of electrolytes has been employed, containing small amounts of hydrochloric or sulfuric acid and strontium or calcium ions. The H loading has been continuously evaluated through ac measurements of the Pd wire resistance. Uncommonly low resistivity values, leading to an estimate of exceptionally high H loading, have been observed. Evidence of the existence of a new phase in the very high H content region of the Pd-H system has been inferred on the basis of the determination of the temperature coefficient of the electrical resistivity. Mainly for this purpose a thin layer of Hg was galvanically deposed on the cathodic surface, in order to prevent any H deloading during the measurements. The results have been fully reproduced in other 2 well equipped and experienced Laboratories (Italy, USA).

  7. Furrow Dike Water Conservation Practices in the Texas High Plains

    OpenAIRE

    Wistrand, Glen L.

    1984-01-01

    Furrow diking can prevent irrigation and rainfall runoff, conserve energy use, prevent soil loss, amd allow producers to reclaim land otherwise unusable, depending on soil, climate, and crops grown in a given area. Initial investment to use this technique may be recovered within the first season. This study analyzes the effects of diking on water and soil conservation, crop yields, costs, and energy use in farming, using examples of farms in the Texas High Plains area.

  8. Reverse osmosis membrane of high urea rejection properties. [water purification

    Science.gov (United States)

    Johnson, C. C.; Wydeven, T. J. (Inventor)

    1980-01-01

    Polymeric membranes suitable for use in reverse osmosis water purification because of their high urea and salt rejection properties are prepared by generating a plasma of an unsaturated hydrocarbon monomer and nitrogen gas from an electrical source. A polymeric membrane is formed by depositing a polymer of the unsaturated monomer from the plasma onto a substrate, so that nitrogen from the nitrogen gas is incorporated within the polymer in a chemically combined form.

  9. Furrow Dike Water Conservation Practices in the Texas High Plains

    OpenAIRE

    Wistrand, Glen L.

    1984-01-01

    Furrow diking can prevent irrigation and rainfall runoff, conserve energy use, prevent soil loss, amd allow producers to reclaim land otherwise unusable, depending on soil, climate, and crops grown in a given area. Initial investment to use this technique may be recovered within the first season. This study analyzes the effects of diking on water and soil conservation, crop yields, costs, and energy use in farming, using examples of farms in the Texas High Plains area.

  10. High electrical permittivity of ultrapure water at the water-platinum interface

    Science.gov (United States)

    Musumeci, Francesco; Pollack, Gerald H.

    2014-10-01

    The discharge of a platinum parallel-plate capacitor filled with ultrapure water has been measured. The observed discharge trend can be described by a Modified Poisson-Boltzmann Equation (MPB) only when the voltage is very low. Increasing the applied voltage creates an ‘exclusion zone' in which the MPB equation no longer fits, and the system capacitance shows a dependence on the spacing between the two platinum plates. The permittivity of water, calculated considering the system as a plane capacitor, appears to be very high. This implies that the exclusion zone could have extraordinary dielectric properties.

  11. Synthesis and infrared spectra of alkaline earth metal carbonates formed by the reaction of metal salts with urea at high temperature

    Indian Academy of Sciences (India)

    S M Teleb; D El-Sayed Nassr; E M Nour

    2004-12-01

    The metal carbonate, MCO3 (M = Ca, Sr and Ba), was synthesized by a novel method of reacting aqueous solution of each of Ca2+, Sr2+ and Ba2+ salts with urea at high temperature, ∼ 80°C. The reaction products were characterized through elemental analysis and infrared spectra. The infrared spectra of the products are the same as those of the corresponding commercially obtained carbonates. A general reaction describing the formation of MCO3 is proposed.

  12. High prevalence of enteric viruses in untreated individual drinking water sources and surface water in Slovenia.

    Science.gov (United States)

    Steyer, Andrej; Torkar, Karmen Godič; Gutiérrez-Aguirre, Ion; Poljšak-Prijatelj, Mateja

    2011-09-01

    Waterborne infections have been shown to be important in outbreaks of gastroenteritis throughout the world. Although improved sanitary conditions are being progressively applied, fecal contaminations remain an emerging problem also in developed countries. The aim of our study was to investigate the prevalence of fecal contaminated water sources in Slovenia, including surface waters and groundwater sources throughout the country. In total, 152 water samples were investigated, of which 72 samples represents groundwater from individual wells, 17 samples from public collection supplies and 63 samples from surface stream waters. Two liters of untreated water samples were collected and concentrated by the adsorption/elution technique with positively charged filters followed by an additional ultracentrifugation step. Group A rotaviruses, noroviruses (genogroups I and II) and astroviruses were detected with real-time RT-PCR method in 69 (45.4%) out of 152 samples collected, of which 31/89 (34.8%) drinking water and 38/63 (60.3%) surface water samples were positive for at least one virus tested. In 30.3% of drinking water samples group A rotaviruses were detected (27/89), followed by noroviruses GI (2.2%; 2/89) and astroviruses (2.2%; 2/89). In drinking groundwater samples group A rotaviruses were detected in 27 out of 72 tested samples (37.5%), genogroup I noroviruses in two (2.8%), and human astroviruses in one (1.4%) samples. In surface water samples norovirus genogroup GII was the most frequently detected (41.3%; 26/63), followed by norovirus GI (33.3%; 21/63), human astrovirus (27.0%; 17/63) and group A rotavirus (17.5%; 11/63). Our study demonstrates relatively high percentage of groundwater contamination in Slovenia and, suggests that raw groundwater used as individual drinking water supply may constitute a possible source of enteric virus infections. In the future, testing for enteric viruses should be applied for drinking water sources in waterborne outbreaks.

  13. First scientific contributions from the High Altitude Water Cherenkov Observatory

    Science.gov (United States)

    León Vargas, H.; HAWC Collaboration

    2015-09-01

    The High Altitude Water Cherenkov Observatory (HAWC), located at the slopes of the volcanoes Sierra Negra and Pico de Orizaba in Mexico, was inaugurated on March 20, 2015. However, data taking started in August 2013 with a partially deployed observatory and since then the instrument has collected data as it got closer to its final configuration. HAWC is a ground based TeV gamma-ray observatory with a large field of view that will be used to study the Northern sky with high sensitivity. In this contribution we present some of the results obtained with the partially built instrument and the expected capabilities to detect different phenomena with the complete observatory.

  14. A Water Tank Cerenkov Detector for Very High Energy Astroparticles

    CERN Document Server

    Bauleo, P; Niello, J O F; Ferrero, A M J; Filevich, A; Guérard, C K; Hasenbalg, F; Mostafa, M A; Ravignani, D; Martino, J

    1998-01-01

    Extensive airshower detection is an important issue in current astrophysics endeavours. Surface arrays detectors are a common practice since they are easy to handle and have a 100% duty cycle. In this work we present an experimental study of the parameters relevant to the design of a water Cerenkov detector for high energy airshowers. This detector is conceived as part of the surface array of the Pierre Auger Project, which is expected to be sensitive to ultra high energy cosmic rays. In this paper we focus our attention in the geometry of the tank and its inner liner material, discussing pulse shapes and charge collections.

  15. High undercooling of bulk water during acoustic levitation

    Institute of Scientific and Technical Information of China (English)

    Lü; Yongjun(吕勇军); CAO; Chongde(曹崇德); WEI; Bingbo(魏炳波)

    2003-01-01

    The experiments on undercooling of acoustically levitated water drops with the radius of 5-8 mm are carried out, and the maximum undercooling of 24 K is obtained in such a containerless state. Various factors influencing the undercoolability of water under acoustic levitation are synthetically analyzed. The experimental results indicate that impurities tend to decrease the undercooling level, whereas the dominant factor is the effect of ultrasound. The stirring and cavitation effects of ultrasound tend to stimulate the nucleation of water and prevent further bulk undercooling in experiments. The stirring effect provides some extra energy fluctuation to overcome the thermodynamic barrier for nucleation. The local high pressure caused by cavitation effect increases the local undercooling in water and stimulates nucleation before the achievement of a large bulk undercooling. According to the cooling curves, the dendrite growth velocity of ice is estimated, which is in good agreement with the theoretical prediction at the lower undercooling. The theoretical calculation predicts a dendrite growth velocity of 0.23 m/s corresponding to the maximum undercooling of 24 K, at which the rapid solidification of ice occurs.

  16. Water-permeability measurement of high performance concrete using a high-pressure triaxial cell

    Energy Technology Data Exchange (ETDEWEB)

    El-Dieb, A.S. [Ain Shams Univ., Cairo (Egypt). Dept. of Civil Engineering; Hooton, R.D. [Univ. of Toronto, Ontario (Canada). Dept. of Civil Engineering

    1995-08-01

    Water permeability of concrete is used to indicate its durability. Accurate and reproducible measurement of water permeability is difficult and becomes more difficult as the quality of concrete increases. When high-performance concrete (HPC) is tested, these concerns become more pronounced. HPC is used widely to improve the durability and performance of structures but there are few test procedures able to evaluate its permeability-related properties. In this study the water permeabilities of concretes including HPC were measured using a high-pressure triaxial cell with a sensitive and automated measurement capability. Special analysis procedures were developed to obtain useful data from the extremely low volume of water being measured. This method was able to measure a wide range of permeability values from 10{sup {minus}12} m/s to 10{sup {minus}16} m/s, with reproducible measurements on replicates.

  17. Tracing the geochemical evolution of alkaline Lake Van, Turkey

    Science.gov (United States)

    Kwiecien, Ola; Viehberg, Finn; Plessen, Birgit; Litt, Thomas; Tillman Meyer, Felix

    2015-04-01

    Terminal Lake Van, the world's largest soda basin, is characterised by Na-CO3-Cl water chemistry (Reimer et al., 2008), salinity of ~22 ‰ and high pH of ~9.7. The sedimentary record of the lake goes ca. 600 ka back and documents major climatic events over that period (Stockhecke et al., 2014). Alas, the longevity of the basin does not mean that it persisted unchanged over such a long time. Information collected within the ICDP PALEOVAN project clearly suggests that upon its birth the chemistry of early Lake Van was very different from its modern alkaline equivalent. Here we document, by means of proxy data, the changes in water chemistry in a transforming basin. Results of lithological (Stockhecke et al., 2014) and micropaleontological (ostracod, gastropod and diatom assemblages) analysis, combined with geochemical data (δ18O, δ13C, Mg/Ca, Sr/Ca) obtained from the biogenic and authigenic carbonate fraction imply, that early Lake Van was a relatively shallow, fresh-to-brackish and, most probably, open basin. Sedimentological information points to tectonic factors rather than climatic changes responsible for closing the lake ca. 430 ka ago. Reimer, A., Landmann, G., Kempe, S., 2008. Lake Van, Eastern Anatolia, Hydrochemistry and History. Aquat. Geochemistry 15, 195-222. Stockhecke, M., Sturm, M., Brunner, I., Schmincke, H.-U., Sumita, M., Kipfer, R., Cukur, D., Kwiecien, O., Anselmetti, F.S., 2014. Sedimentary evolution and environmental history of Lake Van (Turkey) over the past 600 000 years. Sedimentology.

  18. Pomegranate-like N,P-Doped Mo2C@C Nanospheres as Highly Active Electrocatalysts for Alkaline Hydrogen Evolution.

    Science.gov (United States)

    Chen, Yu-Yun; Zhang, Yun; Jiang, Wen-Jie; Zhang, Xing; Dai, Zhihui; Wan, Li-Jun; Hu, Jin-Song

    2016-09-27

    Well-defined pomegranate-like N,P-doped Mo2C@C nanospheres were prepared by simply using phosphomolybdic acid (PMo12) to initiate the polymerization of polypyrrole (PPy) and as a single source for Mo and P to produce N,P-doped Mo2C nanocrystals. The existence of PMo12 at the molecular scale in the polymer network allows the formation of pomegranate-like Mo2C@C nanospheres with a porous carbon shell as peel and Mo2C nanocrystals well-dispersed in the N-doped carbon matrix as seeds. This nanostructure provides several favorable features for hydrogen evolution application: (1) the conductive carbon shell and matrix effectively prevent the aggregation of Mo2C nanocrystals and facilitate electron transportation; (2) the uniform N,P-doping in the carbon shell/matrix and plenty of Mo2C nanocrystals provide abundant catalytically highly active sites; and (3) nanoporous structure allows the effective exposure of active sites and mass transfer. Moreover, the uniform distribution of P and Mo from the single source of PMo12 and N from PPy in the polymeric PPy-PMo12 precursor guarantees the uniform N- and P-co-doping in both the graphitic carbon matrix and Mo2C nanocrystals, which contributes to the enhancement of electrocatalytic performance. As a result, the pomegranate-like Mo2C@C nanospheres exhibit extraordinary electrocatalytic activity for the hydrogen evolution reaction (HER) in terms of an extremely low overpotential of 47 mV at 10 mA cm(-2) in 1 M KOH, which is one of the best Mo-based HER catalysts. The strategy for preparing such nanostructures may open up opportunities for exploring low-cost high-performance electrocatalysts for various applications.

  19. Application conditions for ester cured alkaline phenolic resin sand

    Institute of Scientific and Technical Information of China (English)

    Ren-he Huang; Bao-ping Zhang; Yao-ji Tang

    2016-01-01

    Five organic esters with different curing speeds: propylene carbonate (i.e. high-speed ester A); 1, 4-butyrolactone; glycerol triacetate (i.e. medium-speed ester B); glycerol diacetate; dibasic ester (DBE) (i.e. low-speed ester C), were chosen to react with alkaline phenolic resin to analyze the application conditions of ester cured alkaline phenolic resin. The relationships between the curing performances of the resin (including pH value, gel pH value, gel time of resin solution, heat release rate of the curing reaction and tensile strength of the resin sand) and the amount of added organic ester and curing temperature were investigated. The results indicated the folowing: (1) The optimal added amount of organic ester should be 25wt.%-30wt.% of alkaline phenolic resin and it must be above 20wt.%-50 wt.% of the organic ester hydrolysis amount. (2) High-speed ester A (propylene carbonate) has a higher curing speed than 1, 4-butyrolactone, and they were both used as high-speed esters. Glycerol diacetate is not a high-speed ester in alkaline phenolic resin although it was used as a high-speed ester in ester cured sodium silicate sand; glycerol diacetate and glycerol triacetate can be used as medium-speed esters in alkaline phenolic resin. (3) High-speed ester A, medium-speed ester B (glycerol triacetate) and low-speed ester C (dibasic ester, i.e., DBE) should be used below 15 ºC, 35 ºC and 50 ºC, respectively. High-speed ester A or low-speed ester C should not be used alone but mixed with medium-speed ester B to improve the strength of the resin sand. (4) There should be a suitable solid content (generaly 45wt.%-65wt.% of resin), alkali content (generaly 10wt.%-15wt.% of resin) and viscosity of alkaline phenolic resin (generaly 50-300 mPa·s) in the preparation of alkaline phenolic resin. Finaly, the technique conditions of alkaline phenolic resin preparation and the application principles of organic ester were discussed.

  20. Alkaline phosphatase activity at the southwest coast of India: A comparison of locations differently affected by upwelling..

    Digital Repository Service at National Institute of Oceanography (India)

    Mamatha, S.S.; Malik, A.; Varik, S.; Parvathi, V.; Jineesh, V.K.; Gauns, M.; LokaBharathi, P.A.

    coastal waters. As alkaline phosphatase activity (APA) indicates the status of P for primary production in aquatic environments, we asked the following question: is the level of APA indicative of P sufficiency or deficiency in coastal waters, especially...

  1. Water vapor intrusions into the High Arctic during winter

    Science.gov (United States)

    Doyle, J. G.; Lesins, G.; Thackray, C. P.; Perro, C.; Nott, G. J.; Duck, T. J.; Damoah, R.; Drummond, J. R.

    2011-06-01

    The meridional transport of water vapor into the High Arctic, accompanied by dry enthalpy and clouds, impacts the surface radiative forcing. The evolution of one such moist intrusion over 9-11 February 2010 is presented. The event is analyzed using a unique blend of measurements including a new pan-Arctic retrieval of column water vapor from the Microwave Humidity Sounders, water vapor profiles from a Raman lidar and a ground-based microwave radiometer at the Polar Environment Atmospheric Research Laboratory (PEARL), in Eureka (80°N, 86°W), on Ellesmere Island in the Canadian High Arctic. A radiation model reveals the intrusion is associated with a 17 W m-2 average increase in downwelling longwave irradiance. Optically thin clouds, as observed by the lidar, contribute a further 20 W m-2 to the downwelling longwave irradiance at their peak. Intrusion events are shown to be a regular occurrence in the Arctic winter with implications for the understanding of the mechanisms driving Arctic Amplification.

  2. 高硫银金精矿碱浸预处理试验研究与生产实践%Experimental research and production practice of alkaline leaching pretreatment of high sulfur content silver and gold concentrates

    Institute of Scientific and Technical Information of China (English)

    李小平; 张云芳

    2013-01-01

    In light of the re-precipitation phenomenon happened during the cyanide leaching process of high sulfur content silver and gold concentrate in Hubei Xinrong mining industry company ,an alkaline leaching and oxidation pre-treatment process carried out to the concentrate is applied by using KMnO 4 which effectively removed the re-precipita-tion.Compared to the case before the pretreatment ,the cyanide leaching rates of silver and gold are raised by 4.65%and 1.43 %respectively.%针对湖北鑫荣矿业有限公司高硫银金精矿氰化浸出过程中银、金出现“返沉淀”的现象,对精矿采用高锰酸钾进行碱浸氧化预处理,有效地消除了银、金的“返沉淀”现象,银、金的氰化浸出率比预处理前分别提高4.65%和1.43%。

  3. Corrosion inhibition capacity of non-phosphorus corrosion inhibitor in water with moderate alkalinity and moderate hardness for A3 carbon steel%无磷缓蚀剂在中碱中硬水质中对A3碳钢的缓蚀性能

    Institute of Scientific and Technical Information of China (English)

    王超; 李颜云; 陶蕾; 秦立娟; 王昊

    2015-01-01

    开发了一种酰胺类无磷缓蚀剂,在中碱度中硬度水质中进行了缓蚀应用研究。选用A3碳钢作为测试对象,采用旋转挂片失重法和电化学阻抗法对酰胺类无磷缓蚀剂的缓蚀性能进行研究。测试结果表明,该酰胺类无磷缓蚀剂在中碱度中硬度的循环水水质下具有良好的缓蚀性能,能够有效地满足循环水系统的金属缓蚀需求。%A kind of amide derivative non-phosphorus corrosion inhibitor has been synthesized. Its application to corrosion inhibition in water with moderate alkalinity and moderate hardness is studied. Using carbon steel A3 as de-tection target,the corrosion inhibiting capacity of amide derivative non-phosphorus corrosion inhibitor by rotary coupon weight-loss method and electrochemical impedance method is studied. The results indicate that the amide derivative non-phosphorus corrosion inhibitor has good corrosion inhibiting capacity in circulating water with moder-ate alkalinity and moderately hardness ,being able to effectively meet the metal corrosion inhibition requirements for circulating water systems.

  4. Alkaline stability of quaternary ammonium cations for alkaline fuel cell membranes and ionic liquids.

    Science.gov (United States)

    Marino, M G; Kreuer, K D

    2015-02-01

    The alkaline stability of 26 different quaternary ammonium groups (QA) is investigated for temperatures up to 160 °C and NaOH concentrations up to 10 mol L(-1) with the aim to provide a basis for the selection of functional groups for hydroxide exchange membranes in alkaline fuel cells and of ionic-liquid cations stable in basic conditions. Most QAs exhibit unexpectedly high alkaline stability with the exception of aromatic cations. β-Protons are found to be far less susceptible to nucleophilic attack than previously suggested, whereas the presence of benzyl groups, nearby hetero-atoms, or other electron-withdrawing species promote degradation reactions significantly. Cyclic QAs proved to be exceptionally stable, with the piperidine-based 6-azonia-spiro[5.5]undecane featuring the highest half-life at the chosen conditions. Absolute and relative stabilities presented herein stand in contrast to literature data, the differences being ascribed to solvent effects on degradation.

  5. Analysis of Cocoa Proanthocyanidins Using Reversed Phase High-Performance Liquid Chromatography and Electrochemical Detection: Application to Studies on the Effect of Alkaline Processing.

    Science.gov (United States)

    Stanley, Todd H; Smithson, Andrew T; Neilson, Andrew P; Anantheswaran, Ramaswamy C; Lambert, Joshua D

    2015-07-01

    Flavan-3-ols and proanthocyanidins play a key role in the health beneficial effects of cocoa. Here, we developed a new reversed phased high-performance liquid chromatography-electrochemical detection (HPLC-ECD) method for the analysis of flavan-3-ols and proanthocyanidins of degree of polymerization (DP) 2-7. We used this method to examine the effect of alkalization on polyphenol composition of cocoa powder. Treatment of cocoa powder with NaOH (final pH 8.0) at 92 °C for up to 1 h increased catechin content by 40%, but reduced epicatechin and proanthocyanidins by 23-66%. Proanthocyanidin loss could be modeled using a two-phase exponential decay model (R(2) > 0.7 for epicatchin and proanthocyanidins of odd DP). Alkalization resulted in a significant color change and 20% loss of total polyphenols. The present work demonstrates the first use of HPLC-ECD for the detection of proanthocyanidins up to DP 7 and provides an initial predictive model for the effect of alkali treatment on cocoa polyphenols.

  6. Is Centrophorus squamosus a highly migratory deep-water shark?

    Science.gov (United States)

    Rodríguez-Cabello, Cristina; Sánchez, Francisco

    2014-10-01

    Deep-water sharks are considered highly vulnerable species due to their life characteristics and very low recovery capacity against overfishing. However, there is still limited information on the ecology or population connectivity of these species. The aim of this study was to investigate if the species Centrophorus squamosus could make long displacements and thus confirm the existence of connectivity between different deep-water areas. In addition, the study was the first attempt to use tagging techniques on deep-water sharks, since it has never been undertaken before. Five C. squamosus were tagged with satellite tags (PAT) in the El Cachucho Marine Protected Area (Le Danois Bank) located in waters of the North of Spain, Cantabrian Sea (NE Atlantic). Data from four of these tags were recovered. One of the sharks travelled approximately 287 nm toward the north east (French continental shelf) hypothetically following the continental slope at a mean depth of 901±109 m for 45 days. Two other sharks spent almost 4 months traveling, in which time they moved 143 and 168 nm, respectively, to the west (Galician coast). Finally, another leafscale gulper shark travelled to the NW (Porcupine Bank) during a period of 3 months at a mean depth of 940±132 m. Depth and temperature preferences for all the sharks are discussed. Minimum and maximum depths recorded were 496 and 1848 m, respectively. The temperature range was between 6.2 and 11.4 °C, but the mean temperature was approximately 9.9±0.7 °C. The sharks made large vertical displacements throughout the water column with a mean daily depth range of 345±27 m. These preliminary results support the suggestion of a whole population in the NE Atlantic and confirm the capacity of this species to travel long distances.

  7. Coral calcification under environmental change: a direct comparison of the alkalinity anomaly and buoyant weight techniques

    Science.gov (United States)

    Schoepf, Verena; Hu, Xinping; Holcomb, Michael; Cai, Wei-Jun; Li, Qian; Wang, Yongchen; Xu, Hui; Warner, Mark E.; Melman, Todd F.; Hoadley, Kenneth D.; Pettay, D. Tye; Matsui, Yohei; Baumann, Justin H.; Grottoli, Andréa G.

    2017-03-01

    Two primary methods—the buoyant weight (BW) and alkalinity anomaly (AA) techniques—are currently used to quantify net calcification rates ( G) in scleractinian corals. However, it remains unclear whether they are directly comparable since the few method comparisons conducted to date have produced inconsistent results. Further, such a comparison has not been made for tropical corals. We directly compared G BW and G AA in four tropical and one temperate coral species cultured under various pCO2, temperature, and nutrient conditions. A range of protocols for conducting alkalinity depletion incubations was assessed. For the tropical corals, open-top incubations with manual stirring produced G AA that were highly correlated with and not significantly different from G BW. Similarly, G AA of the temperate coral was not significantly different from G BW when incubations provided water motion using a pump, but were significantly lower than G BW by 16% when water motion was primarily created by aeration. This shows that the two techniques can produce comparable calcification rates in corals but only when alkalinity depletion incubations are conducted under specific conditions. General recommendations for incubation protocols are made, especially regarding adequate water motion and incubation times. Further, the re-analysis of published data highlights the importance of using appropriate regression statistics when both variables are random and measured with error. Overall, we recommend the AA technique for investigations of community and short-term day versus night calcification, and the BW technique to measure organism calcification rates integrated over longer timescales due to practical limitations of both methods. Our findings will facilitate the direct comparison of studies measuring coral calcification using either method and thus have important implications for the fields of ocean acidification research and coral biology in general.

  8. Oxy-combustion of high water content fuels

    Science.gov (United States)

    Yi, Fei

    As the issues of global warming and the energy crisis arouse extensive concern, more and more research is focused on maximizing energy efficiency and capturing CO2 in power generation. To achieve this, in this research, we propose an unconventional concept of combustion - direct combustion of high water content fuels. Due to the high water content in the fuels, they may not burn under air-fired conditions. Therefore, oxy-combustion is applied. Three applications of this concept in power generation are proposed - direct steam generation for the turbine cycle, staged oxy-combustion with zero flue gas recycle, and oxy-combustion in a low speed diesel-type engine. The proposed processes could provide alternative approaches to directly utilize fuels which intrinsically have high water content. A large amount of energy to remove the water, when the fuels are utilized in a conventional approach, is saved. The properties and difficulty in dewatering high water content fuels (e.g. bioethanol, microalgae and fine coal) are summarized. These fuels include both renewable and fossil fuels. In addition, the technique can also allow for low-cost carbon capture due to oxy-combustion. When renewable fuel is utilized, the whole process can be carbon negative. To validate and evaluate this concept, the research focused on the investigation of the flame stability and characteristics for high water content fuels. My study has demonstrated the feasibility of burning fuels that have been heavily diluted with water in a swirl-stabilized burner. Ethanol and 1-propanol were first tested as the fuels and the flame stability maps were obtained. Flame stability, as characterized by the blow-off limit -- the lowest O2 concentration when a flame could exist under a given oxidizer flow rate, was determined as a function of total oxidizer flow rate, fuel concentration and nozzle type. Furthermore, both the gas temperature contour and the overall ethanol concentration in the droplets along the

  9. Potential effects of desalinated water quality on the operation stability of wastewater treatment plants.

    Science.gov (United States)

    Lew, Beni; Cochva, Malka; Lahav, Ori

    2009-03-15

    Desalinated water is expected to become the major source of drinking water in many places in the near future, and thus the major source of wastewater to arrive at wastewater treatment plants. The paper examines the effect of the alkalinity value with which the water is released from the desalination plant on the alkalinity value that would develop within the wastewater treatment process under various nitrification-denitrification operational scenarios. The main hypothesis was that the difference in the alkalinity value between tap water and domestic wastewater is almost exclusively a result of the hydrolysis of urea (NH(2)CONH(2), excreted in the human urine) to ammonia (NH(3)), regardless of the question what fraction of NH(3(aq)) is transformed to NH(4)(+). Results from a field study show that the ratio between the alkalinity added to tap water when raw wastewater is formed (in meq/l units) and the TAN (total ammonia nitrogen, mole/l) concentration in the raw wastewater is almost 1:1 in purely domestic sewage and close to 1:1 in domestic wastewater streams mixed with light industry wastewaters. Having established the relationship between TAN and total alkalinity in raw wastewater the paper examines three theoretical nitrification-denitrification treatment scenarios in the wastewater treatment plant (WWTP). The conclusion is that if low-alkalinity desalinated water constitutes the major water source arriving at the WWTP, external alkalinity will have to be added in order to avoid pH drop and maintain process stability. The results lead to the conclusion that supplying desalinated water with a high alkalinity value (e.g. > or =100 mg/l as CaCO(3)) would likely prevent the need to add costly basic chemicals in the WWTP, while, in addition, it would improve the chemical and biological stability of the drinking water in the distribution system.

  10. Chapter A6. Section 6.6. Alkalinity and Acid Neutralizing Capacity

    Science.gov (United States)

    Rounds, Stewart A.; Wilde, Franceska D.

    2002-01-01

    Alkalinity (determined on a filtered sample) and Acid Neutralizing Capacity (ANC) (determined on a whole-water sample) are measures of the ability of a water sample to neutralize strong acid. Alkalinity and ANC provide information on the suitability of water for uses such as irrigation, determining the efficiency of wastewater processes, determining the presence of contamination by anthropogenic wastes, and maintaining ecosystem health. In addition, alkalinity is used to gain insights on the chemical evolution of an aqueous system. This section of the National Field Manual (NFM) describes the USGS field protocols for alkalinity/ANC determination using either the inflection-point or Gran function plot methods, including calculation of carbonate species, and provides guidance on equipment selection.

  11. Postgraduate Symposium: Positive influence of nutritional alkalinity on bone health.

    Science.gov (United States)

    Wynn, E; Krieg, M A; Lanham-New, S A; Burckhardt, P

    2010-02-01

    patients with an already-high fracture risk. The latter study adds to knowledge by confirming a positive link between dietary alkalinity and bone health indices in the very elderly. In a further study to complement these findings it has also been shown in a group of thirty young women that in Ca sufficiency an acid Ca-rich water has no effect on bone resorption, while an alkaline bicarbonate-rich water leads to a decrease in both serum parathyroid hormone and serum C-telopeptide. Further investigations need to be undertaken to study whether these positive effects on bone loss are maintained over long-term treatment. Mineral-water consumption could be an easy and inexpensive way of helping to prevent osteoporosis and could be of major interest for long-term prevention of bone loss.

  12. Corrosion behaviour of construction materials for high temperature water electrolysers

    DEFF Research Database (Denmark)

    Nikiforov, Aleksey

    2010-01-01

    proton exchange membrane (PEM) water electrolysers (HTPEMWE). All samples were exposed to anodic polarisation in 85% phosphoric acid electrolyte solution. Platinum and gold plates were tested for the valid comparison. Steady-state voltammetry was used in combination with scanning electron microscopy......Different types of corrosion resistant stainless steels, Ni-based alloys as well as titanium and tantalum were evaluated as a possible metallic bipolar plate and construction material with respect to corrosion resistance under simulated conditions corresponding to the conditions in high temperature...

  13. Enhanced Acid/Base Catalysis in High Temperature Liquid Water

    Institute of Scientific and Technical Information of China (English)

    Xiu Yang LU; Qi JING; Zhun LI; Lei YUAN; Fei GAO; Xin LIU

    2006-01-01

    Two novel and environmentally benign solvent systems, organic acids-enriched high temperature liquid water (HTLW) and NH3-enriched HTLW, were developed, which can enhance the reaction rate of acid/base-catalyzed organic reactions in HTLW. We investigated the decomposition of fructose in organic acids-enriched HTLW, hydrolysis of cinnamaldehyde and aldol condensation of phenylaldehyde with acetaldehyde in NH3-enriched HTLW. The experimental results demonstrated that organic acids-enriched or NH3-enriched HTLW can greatly accelerate acid/base-catalyzed organic reactions in HTLW.

  14. Using high frequency water quality data to assess sampling strategies for the EU Water Framework Directive

    Science.gov (United States)

    Skeffington, R. A.; Halliday, S. J.; Wade, A. J.; Bowes, M. J.; Loewenthal, M.

    2015-01-01

    The EU Water Framework Directive (WFD) requires that the ecological and chemical status of water bodies in Europe should be assessed, and action taken where possible to ensure that at least "good" quality is attained in each case by 2015. This paper is concerned with the accuracy and precision with which chemical status in rivers can be measured given certain sampling strategies, and how this can be improved. High frequency (hourly) chemical data from four rivers in southern England were subsampled to simulate different sampling strategies for four parameters used for WFD classification: dissolved phosphorus, dissolved oxygen, pH and water temperature. These data sub-sets were then used to calculate the WFD classification for each site. Monthly sampling was less precise than weekly sampling, but the effect on WFD classification depended on the closeness of the range of concentrations to the class boundaries. In some cases, monthly sampling for a year could result in the same water body being assigned to one of 3 or 4 WFD classes with 95% confidence, whereas with weekly sampling this was 1 or 2 classes for the same cases. In the most extreme case, random sampling effects could result in the same water body being assigned to any of the 5 WFD quality classes. The width of the weekly sampled confidence intervals was about 33% that of the monthly for P species and pH, about 50% for dissolved oxygen, and about 67% for water temperature. For water temperature, which is assessed as the 98th percentile in the UK, monthly sampling biases the mean downwards by about 1 °C compared to the true value, due to problems of assessing high percentiles with limited data. Confining sampling to the working week compared to all seven days made little difference, but a modest improvement in precision could be obtained by sampling at the same time of day within a 3 h time window, and this is recommended. For parameters with a strong diel variation, such as dissolved oxygen, the value

  15. Scientific verification of High Altitude Water Cherenkov observatory

    Energy Technology Data Exchange (ETDEWEB)

    Marinelli, Antonio, E-mail: antonio.marinelli@fisica.unam.mx [Instituto de Física, Universidad Nacional Autónoma de México, Mexico D.F. (Mexico); Sparks, Kathryne [Department of Physics, Pennsylvania State University, University Park, PA (United States); Alfaro, Ruben [Instituto de Física, Universidad Nacional Autónoma de México, Mexico D.F. (Mexico); González, María Magdalena; Patricelli, Barbara; Fraija, Nissim [Instituto de Astronomia, Universidad Nacional Autónoma de México, Mexico D.F. (Mexico)

    2014-04-01

    The High Altitude Water Cherenkov (HAWC) observatory is a TeV gamma-ray and cosmic-ray detector currently under construction at an altitude of 4100 m close to volcano Sierra Negra in the state of Puebla, Mexico. The HAWC [1] observatory is an extensive air-shower array composed of 300 optically isolated water Cherenkov detectors (WCDs). Each WCD contains ∼200,000 l of filtered water and four upward-facing photomultiplier tubes. In Fall 2014, when the HAWC observatory will reach an area of 22,000 m{sup 2}, the sensitivity will be 15 times higher than its predecessor Milagro [2]. Since September 2012, more than 30 WCDs have been instrumented and taking data. This first commissioning phase has been crucial for the verification of the data acquisition and event reconstruction algorithms. Moreover, with the increasing number of instrumented WCDs, it is important to verify the data taken with different configuration geometries. In this work we present a comparison between Monte Carlo simulation and data recorded by the experiment during 24 h of live time between 14 and 15 April of 2013 when 29 WCDs were active.

  16. Scientific verification of High Altitude Water Cherenkov observatory

    Science.gov (United States)

    Marinelli, Antonio; Sparks, Kathryne; Alfaro, Ruben; González, María Magdalena; Patricelli, Barbara; Fraija, Nissim

    2014-04-01

    The High Altitude Water Cherenkov (HAWC) observatory is a TeV gamma-ray and cosmic-ray detector currently under construction at an altitude of 4100 m close to volcano Sierra Negra in the state of Puebla, Mexico. The HAWC [1] observatory is an extensive air-shower array composed of 300 optically isolated water Cherenkov detectors (WCDs). Each WCD contains ~200,000 l of filtered water and four upward-facing photomultiplier tubes. In Fall 2014, when the HAWC observatory will reach an area of 22,000 m2, the sensitivity will be 15 times higher than its predecessor Milagro [2]. Since September 2012, more than 30 WCDs have been instrumented and taking data. This first commissioning phase has been crucial for the verification of the data acquisition and event reconstruction algorithms. Moreover, with the increasing number of instrumented WCDs, it is important to verify the data taken with different configuration geometries. In this work we present a comparison between Monte Carlo simulation and data recorded by the experiment during 24 h of live time between 14 and 15 April of 2013 when 29 WCDs were active.

  17. Alkaline direct alcohol fuel cells using an anion exchange membrane

    Energy Technology Data Exchange (ETDEWEB)

    Matsuoka, Koji; Iriyama, Yasutoshi; Abe, Takeshi; Ogumi, Zempachi [Department of Energy and Hydrocarbon Chemistry, Graduate School of Engineering, Kyoto University, Katsura, Nishikyo-ku, Kyoto 615-8510 (Japan); Matsuoka, Masao [Faculty of Science and Engineering, Ritsumeikan University, Kusatsu, Shiga 525-8577 (Japan)

    2005-10-04

    Alkaline direct alcohol fuel cells using an OH-form anion exchange membrane and polyhydric alcohols were studied. A high open circuit voltage of ca. 800mV was obtained for a cell using Pt-Ru/C (anode) and Pt/C (cathode) at 323K, which was about 100-200mV higher than that for a DMFC using Nafion{sup R}. The maximum power densities were in the order of ethylene glycol>glycerol>methanol>erythritol>xylitol. Silver catalysts were used as a cathode catalyst to fabricate alkaline fuel cells, since silver catalyst is almost inactive in the oxidation of polyhydric alcohols. Alkaline direct ethylene glycol fuel cells using silver as a cathode catalyst gave excellent performance because higher concentrations of fuel could be supplied to the anode. (author)

  18. Molecular dynamics of water at high temperatures and pressures

    Science.gov (United States)

    Brodholt, John; Wood, Bernard

    1990-09-01

    There are currently no precise P-V-T data for water at pressures above 8.9 kbars and temperatures above 900°C. Many petrological processes in the lower crust and upper mantle take place under more extreme conditions, however and petrologists commonly rely on empirical equations of state such as the modified Redlich-Kwong equation (MRK) to extrapolate the low pressure data. In this study we have taken an alternative approach and attempted to simulate the P-V-T properties of water using molecular dynamics. The TIP4P intermolecular potential for H 2O ( JORGENSEN et al., 1983) has had considerable success predicting the properties of water at low temperatures and pressures up to 10 kbar ( MADURA et al., 1988). We have extended its application by making molecular dynamics (MD) simulations at a density of 1.0 g/cc from 300 to 2300 K and 0.5 to 40 kbars. The results agree with the P-V-T data of BURNHAM et al. (1969) (up to 10 kbars) with an average error of under 2%. This is a much better concordance than is obtained with any of the currently used versions of MRK. At 300 kbars and 2000 K the MD simulations predict densities within 8% of those obtained in the shock wave experiments of KORMER (1968). This is a very good agreement given the fact that water ionizes to some extent at high pressures ( MITCHELL and NELLIS, 1982) and we have made no provisions for this effect. We conclude that molecular dynamics simulations provide the possibility of estimating P-V-T properties in the upper mantle P-T regime with very good accuracy.

  19. Multi-decadal increases in dissolved organic carbon and alkalinity flux from the Mackenzie drainage basin to the Arctic Ocean

    Science.gov (United States)

    Tank, Suzanne E.; Striegl, Robert G.; McClelland, James W.; Kokelj, Steven V.

    2016-05-01

    Riverine exports of organic and inorganic carbon (OC, IC) to oceans are intricately linked to processes occurring on land. Across high latitudes, thawing permafrost, alteration of hydrologic flow paths, and changes in vegetation may all affect this flux, with subsequent implications for regional and global carbon (C) budgets. Using a unique, multi-decadal dataset of continuous discharge coupled with water chemistry measurements for the Mackenzie River, we show major increases in dissolved OC (DOC) and IC (as alkalinity) fluxes since the early 1970s, for a watershed that covers 1.8 M km2 of northwestern Canada, and provides substantial inputs of freshwater and biogeochemical constituents to the Arctic Ocean. Over a 39-year period of record, DOC flux at the Mackenzie mouth increased by 39.3% (44.5 ± 22.6 Gmol), while alkalinity flux increased by 12.5% (61.5 ± 60.1 Gmol). Isotopic analyses and substantial increases in sulfate flux indicate that increases in alkalinity are driven by accelerating sulfide oxidation, a process that liberates IC from rock and soils in the absence of CO2 consumption. Seasonal and sub-catchment trends suggest that permafrost thaw plays an important role in the observed increases in DOC and alkalinity: sub-catchment increases for all constituents are confined to northern, permafrost-affected regions, while observed increases in autumn to winter are consistent with documented landscape-scale changes that have resulted from changing thaw dynamics. This increase in DOC and sulfide-derived alkalinity represents a substantial intensification of land-to-ocean C mobilization, at a level that is significant within the regional C budget. The change we observe, for example, is similar to current and projected future rates of CO2 consumption by weathering in the Mackenzie basin.

  20. Multi-decadal increases in dissolved organic carbon and alkalinity flux from the Mackenzie drainage basin to the Arctic Ocean

    Science.gov (United States)

    Tank, Suzanne E.; Striegl, Robert G.; McClelland, James W.; Kokelj, Steven V.

    2016-01-01

    Riverine exports of organic and inorganic carbon (OC, IC) to oceans are intricately linked to processes occurring on land. Across high latitudes, thawing permafrost, alteration of hydrologic flow paths, and changes in vegetation may all affect this flux, with subsequent implications for regional and global carbon (C) budgets. Using a unique, multi-decadal dataset of continuous discharge coupled with water chemistry measurements for the Mackenzie River, we show major increases in dissolved OC (DOC) and IC (as alkalinity) fluxes since the early 1970s, for a watershed that covers 1.8 M km2 of northwestern Canada, and provides substantial inputs of freshwater and biogeochemical constituents to the Arctic Ocean. Over a 39-year period of record, DOC flux at the Mackenzie mouth increased by 39.3% (44.5 ± 22.6 Gmol), while alkalinity flux increased by 12.5% (61.5 ± 60.1 Gmol). Isotopic analyses and substantial increases in sulfate flux indicate that increases in alkalinity are driven by accelerating sulfide oxidation, a process that liberates IC from rock and soils in the absence of CO2 consumption. Seasonal and sub-catchment trends suggest that permafrost thaw plays an important role in the observed increases in DOC and alkalinity: sub-catchment increases for all constituents are confined to northern, permafrost-affected regions, while observed increases in autumn to winter are consistent with documented landscape-scale changes that have resulted from changing thaw dynamics. This increase in DOC and sulfide-derived alkalinity represents a substantial intensification of land-to-ocean C mobilization, at a level that is significant within the regional C budget. The change we observe, for example, is similar to current and projected future rates of CO2 consumption by weathering in the Mackenzie basin.

  1. Water

    Science.gov (United States)

    Leopold, Luna Bergere; Baldwin, Helene L.

    1962-01-01

    What do you use water for?If someone asked you this question you would probably think right away of water for drinking. Then you would think of water for bathing, brushing teeth, flushing the toilet. Your list would get longer as you thought of water for cooking, washing the dishes, running the garbage grinder. Water for lawn watering, for play pools, for swimming pools, for washing the car and the dog. Water for washing machines and for air conditioning. You can hardly do without water for fun and pleasure—water for swimming, boating, fishing, water-skiing, and skin diving. In school or the public library, you need water to wash your hands, or to have a drink. If your home or school bursts into flames, quantities of water are needed to put it out.In fact, life to Americans is unthinkable without large supplies of fresh, clean water. If you give the matter a little thought, you will realize that people in many countries, even in our own, may suffer from disease and dirt simply because their homes are not equipped with running water. Imagine your own town if for some reason - an explosion, perhaps - water service were cut off for a week or several weeks. You would have to drive or walk to a neighboring town and bring water back in pails. Certainly if people had to carry water themselves they might not be inclined to bathe very often; washing clothes would be a real chore.Nothing can live without water. The earth is covered by water over three-fourths of its surface - water as a liquid in rivers, lakes and oceans, and water as ice and snow on the tops of high mountains and in the polar regions. Only one-quarter of our bodies is bone and muscle; the other three-fourths is made of water. We need water to live, and so do plants and animals. People and animals can live a long time without food, but without water they die in a few days. Without water, everything would die, and the world would turn into a huge desert.

  2. Neutralization/prevention of acid rock drainage using mixtures of alkaline by-products and sulfidic mine wastes.

    Science.gov (United States)

    Alakangas, Lena; Andersson, Elin; Mueller, Seth

    2013-11-01

    Backfilling of open pit with sulfidic waste rock followed by inundation is a common method for reducing sulfide oxidation after mine closure. This approach can be complemented by mixing the waste rock with alkaline materials from pulp and steel mills to increase the system's neutralization potential. Leachates from 1 m3 tanks containing sulfide-rich (ca.30 wt %) waste rock formed under dry and water saturated conditions under laboratory conditions were characterized and compared to those formed from mixtures. The waste rock leachate produced an acidic leachate (pH9). The decrease of elemental concentration in the leachate was most pronounced for Pb and Zn, while Al and S were relatively high. Overall, the results obtained were promising and suggest that alkaline by-products could be useful additives for minimizing ARD formation.

  3. Slow reactant-water exchange and high catalytic performance of water-tolerant Lewis acids.

    Science.gov (United States)

    Koito, Yusuke; Nakajima, Kiyotaka; Kobayashi, Hisayoshi; Hasegawa, Ryota; Kitano, Masaaki; Hara, Michikazu

    2014-06-23

    (31)P nuclear magnetic resonance (NMR) spectroscopic measurement with trimethylphosphine oxide (TMPO) was applied to evaluate the Lewis acid catalysis of various metal triflates in water. The original (31)P NMR chemical shift and line width of TMPO is changed by the direct interaction of TMPO molecules with the Lewis acid sites of metal triflates. [Sc(OTf)3] and [In(OTf)3] had larger changes in (31)P chemical shift and line width by formation of the Lewis acid-TMPO complex than other metal triflates. It originates from the strong interaction between the Lewis acid and TMPO, which results in higher stability of [Sc(OTf)3TMPO] and [In(OTf)3TMPO] complexes than other metal triflate-TMPO complexes. The catalytic activities of [Sc(OTf)3] and [In(OTf)3] for Lewis acid-catalyzed reactions with carbonyl compounds in water were far superior to the other metal triflates, which indicates that the high stability of metal triflate-carbonyl compound complexes cause high catalytic performance for these reactions. Density functional theory (DFT) calculation suggests that low LUMO levels of [Sc(OTf)3] and [In(OTf)3] would be responsible for the formation of stable coordination intermediate with nucleophilic reactant in water. © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.

  4. Eco-physiological Characteristics of Alfalfa Seedlings in Response to Various Mixed Salt-alkaline Stresses

    Institute of Scientific and Technical Information of China (English)

    2008-01-01

    Soil salinization and alkalization frequently co-occur in nature, but little is known about the mixed effects of salt-alkaline stresses on plants. An experiment with mixed salts (NaCl, Na2SO4, NaHCO3 and Na2CO3) and 30 salt-alkaline combinations(salinity 24-120 mmol/L and pH 7.03-10.32) treating Medicago sativa seedlings was conducted. The results demonstrated that salinity and alkalinity significantly affected total biomass and biomass components of seedlings. There were interactive effects of salt composition and concentration on biomass (P ≤ 0.001). The interactions between salinity and alkalinity stresses led to changes in the root activity along the salinity gradient (P ≤ 0.001). The effects of alkalinity on seedling survival rate were more significant than those of salinity, and the seedlings demonstrated some physiological responses(leaf electrolyte leakage rate and proline content) in order to adapt to mixed salt-alkaline stresses. It was concluded that the mixed salt-alkaline stresses, which differ from either salt or alkali stress, emphasize the significant interaction between salt concentration (salinity) and salt component (alkalinity). Further, the effects of the interaction between high alkalinity and salinity are more severe than those of either salt or alkali stress, and such a cooperative interaction results in more sensitive responses of ecological and physiological characteristics in plants.

  5. Design method of water jet pump towards high cavitation performances

    Science.gov (United States)

    Cao, L. L.; Che, B. X.; Hu, L. J.; Wu, D. Z.

    2016-05-01

    As one of the crucial components for power supply, the propulsion system is of great significance to the advance speed, noise performances, stabilities and other associated critical performances of underwater vehicles. Developing towards much higher advance speed, the underwater vehicles make more critical demands on the performances of the propulsion system. Basically, the increased advance speed requires the significantly raised rotation speed of the propulsion system, which would result in the deteriorated cavitation performances and consequently limit the thrust and efficiency of the whole system. Compared with the traditional propeller, the water jet pump offers more favourite cavitation, propulsion efficiency and other associated performances. The present research focuses on the cavitation performances of the waterjet pump blade profile in expectation of enlarging its advantages in high-speed vehicle propulsion. Based on the specifications of a certain underwater vehicle, the design method of the waterjet blade with high cavitation performances was investigated in terms of numerical simulation.

  6. First year results of the High Altitude Water Cherenkov observatory

    CERN Document Server

    Carramiñana, Alberto

    2016-01-01

    The High Altitude Water Cherenkov (HAWC) gamma-ray observatory is a wide field of view (1.8 Sr) and high duty cycle (>95% up-time) detector of unique capabilities for the study of TeV gamma-ray sources. Installed at an altitude of 4100m in the Northern slope of Volc\\'an Sierra Negra, Puebla, by a collaboration of about thirty institutions of Mexico and the United States, HAWC has been in full operations since March 2015, surveying 2/3 of the sky every sidereal day, monitoring active galaxies and mapping sources in the Galactic Plane to a detection level of 1 Crab per day. This contribution summarizes the main results of the first year of observations of the HAWC gamma-ray observatory.

  7. First year results of the High Altitude Water Cherenkov observatory

    Science.gov (United States)

    Carramiñana, Alberto

    2016-10-01

    The High Altitude Water Cherenkov (HAWC) γ-ray observatory is a wide field of view (1.8 Sr) and high duty cycle (> 95% up-time) detector of unique capabilities for the study of TeV gamma-ray sources. Installed at an altitude of 4100m in the Northern slope of Volcan Sierra Negra, Puebla, by a collaboration of about thirty institutions of Mexico and the United States, HAWC has been in full operations since March 2015, surveying 2/3 of the sky every sidereal day, monitoring active galaxies and mapping sources in the Galactic Plane to a detection level of 1 Crab per day. This contribution summarizes the main results of the first year of observations of the HAWC γ-ray observatory.

  8. Generation of highly symmetric, cylindrically convergent shockwaves in water

    Science.gov (United States)

    Bland, S. N.; Krasik, Ya. E.; Yanuka, D.; Gardner, R.; MacDonald, J.; Virozub, A.; Efimov, S.; Gleizer, S.; Chaturvedi, N.

    2017-08-01

    We report on pulsed power driven, exploding copper wire array experiments conducted to generate cylindrical convergent shockwaves in water employing μs risetime currents >550 kA in amplitude and with stored energies of >15 kJ—a substantial increase over previous results. The experiments were carried out on the recently constructed Mega-Ampere-Compression-and-Hydrodynamics facility at Imperial College London in collaboration with colleagues of Technion, Israel. 10 mm diameter arrays consisting of 60 × 130 μm wires were utilized, and the current and voltage diagnostics of the load region suggested that ˜8 kJ of energy was deposited in the wires (and the load region close to the wires) during the experiments, resulting in the formation of dense, highly resistive plasmas that rapidly expanded driving the shockwaves in water. Laser-backlit framing images of the shockfront were obtained at radii 50:1. Framing images and streak photographs showed that the velocity of the shockwave reached ˜7.5 km s-1 at 0.1 mm from the axis. 2D hydrodynamic simulations that match the experimentally obtained implosion trajectory suggest that pressures >1 Mbar are produced within 10 μm of the axis along with water densities of 3gcm-3 and temperatures of many 1000 s of Kelvin. Under these conditions, Quotidian Equation of State suggests that a strongly coupled plasma with an ionization fraction of ˜0.7 would be formed. The results represent a "stepping stone" in the application of the technique to drive different material samples into high pressure, warm dense matter regimes with compact, university scale generators, and provide support in scaling the technique to multi-mega ampere currents.

  9. Wall Sticking of High Water-Cut, Highly Viscous and High Gel-Point Crude Oil Transported at Low Temperatures

    Institute of Scientific and Technical Information of China (English)

    Zheng Haimin; Huang Qiyu; Wang Changhui; Wang Xi

    2015-01-01

    Some crude oils with high water cut have the capability to lfow below the oil gel point, while the oil particles ad-here to the pipe wall in the form of paste, also called “wall sticking”. Wall sticking is a serious problem during the pipeline transportation, leading to partial or total blockage of the pipeline and energy wastage. In this paper, a series of laboratory lfow loop experiments were conducted to observe the wall sticking characteristics of crude oil with high water cut, high viscosity and high gel point at low transportation temperatures. The effects of shear stress and water cut on the wall sticking rate and occurrence temperature were investigated. Experimental results indicated that the wall sticking rate and occurrence temperature were lower under stronger shear stress and higher water cut conditions. A criterion of wall sticking occurrence temperature (WSOT) and a regression model of wall sticking rate were then established. Finally, the software was developed to calculate the pressure drop along the pipelines of crude oils with high water-cut. It was able to predict the wall sticking thickness of gelled oil and then calculate the pressure drop along the pipelines. A typical case study indicated that the predic-tion results obtained from the software were in agreement with actual measured values.

  10. High Resolution Sensing and Control of Urban Water Networks

    Science.gov (United States)

    Bartos, M. D.; Wong, B. P.; Kerkez, B.

    2016-12-01

    We present a framework to enable high-resolution sensing, modeling, and control of urban watersheds using (i) a distributed sensor network based on low-cost cellular-enabled motes, (ii) hydraulic models powered by a cloud computing infrastructure, and (iii) automated actuation valves that allow infrastructure to be controlled in real time. This platform initiates two major advances. First, we achieve a high density of measurements in urban environments, with an anticipated 40+ sensors over each urban area of interest. In addition to new measurements, we also illustrate the design and evaluation of a "smart" control system for real-world hydraulic networks. This control system improves water quality and mitigates flooding by using real-time hydraulic models to adaptively control releases from retention basins. We evaluate the potential of this platform through two ongoing deployments: (i) a flood monitoring network in the Dallas-Fort Worth metropolitan area that detects and anticipates floods at the level of individual roadways, and (ii) a real-time hydraulic control system in the city of Ann Arbor, MI—soon to be one of the most densely instrumented urban watersheds in the United States. Through these applications, we demonstrate that distributed sensing and control of water infrastructure can improve flash flood predictions, emergency response, and stormwater contaminant mitigation.

  11. Highlights from the High Altitude Water Cherenkov Observatory

    CERN Document Server

    Pretz, John

    2015-01-01

    The High Altitude Water Cherenkov (HAWC) Gamma-Ray Observatory was completed this year at a 4100-meter site on the flank of the Sierra Negra volcano in Mexico. HAWC is a water Cherenkov ground array with the capability to distinguish 100 GeV - 100 TeV gamma rays from the hadronic cosmic-ray background. HAWC is uniquely suited to study extremely high energy cosmic-ray sources, search for regions of extended gamma-ray emission, and to identify transient gamma-ray phenomena. HAWC will play a key role in triggering multi-wavelength and multi-messenger studies of active galaxies, gamma-ray bursts, supernova remnants and pulsar wind nebulae. Observation of TeV photons also provide unique tests for a number of fundamental physics phenomena including dark matter annihilation and primordial black hole evaporation. Operation began mid-2013 with the partially-completed detector. Multi-TeV emission from the Galactic Plane is clearly seen in the first year of operation, confirming a number of known TeV sources, and a numb...

  12. GPS inland water buoys for precise and high temporal resolution water level and movement monitoring

    Science.gov (United States)

    Apel, Heiko; Nghia Hung, Nguyen; Thoss, Heiko; Güntner, Andreas

    2010-05-01

    Monitoring of river and lake stages is one of the basic issues in understanding catchment hydrology and hydraulic systems. There are numerous techniques available for this, but in case of large water bodies technical as well as financial problems may restrict the use of traditional techniques. Therefore we explored the potential of GPS based altimetry for stage monitoring by developing small and easy to handle buoys with mounted high precision GPS devices. The advantages of the buoys are the freedom of positioning over the whole water body and their quick and easy deployment. The developed devices were tested in the Mekong Delta, Vietnam in two different locations: On the Mekong river where high currents over the flood season occur and in a small lake with hydraulic connections to a major channel with hardly any currents present. The collected GPS data were processed differentially and tested against standard pressure gauge data. The recorded stages proved to be of high quality and a valuable resource for flood monitoring and modeling. In addition to the stage data, the high-precision GPS positioning data could also be used for monitoring the movement of the buoys, from which alternating currents caused by ocean tides and flood waves could be detected, thus providing an additional information on the hydraulic system. We conclude that the developed buoys add well to the existing hydrological monitoring pool and are a goof option for the monitoring in large water bodies where a) traditional methods are technically difficult to deploy or are too costly, and b) where additional information about flow direction is needed.

  13. Increased performance of hydrogen production in microbial electrolysis cells under alkaline conditions.

    Science.gov (United States)

    Rago, Laura; Baeza, Juan A; Guisasola, Albert

    2016-06-01

    This work reports the first successful enrichment and operation of alkaline bioelectrochemical systems (microbial fuel cells, MFC, and microbial electrolysis cells, MEC). Alkaline (pH=9.3) bioelectrochemical hydrogen production presented better performance (+117%) compared to conventional neutral conditions (2.6 vs 1.2 litres of hydroge